Powered by Deep Web Technologies
Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

HURRICANE PREDICTION, OIL RIGS, AND INSURANCE: KATRINA, RITA, AND BEYOND  

E-Print Network [OSTI]

on meteorological and oceanographic design specifications for offshore structures such as oil rigs. Dr. Forristall spent over 30 years as an offshore research engineer and advisor for Shell Oil, both nationallyHURRICANE PREDICTION, OIL RIGS, AND INSURANCE: KATRINA, RITA, AND BEYOND LUNCHEON BRIEFING

2

Ministers block disposal of oil rigs at sea  

Science Journals Connector (OSTI)

... ministers last week ended three years of public controversy about the fate of disused oil rigs in the northeast Atlantic ocean. They decided that most will have to be dismantled ... all environmentalist groups. Oil companies, on the other hand, were disappointed. The UK Offshore Operators Association said the decision to outlaw deep-sea disposal of oil and gas ...

Ehsan Masood

1998-07-30T23:59:59.000Z

3

U. S. rig count drops below 600, a post-1940 low  

SciTech Connect (OSTI)

This paper reports that the Baker Hughes Inc. count of active U.S. rotary rigs as of June 12 fell to less than 600 the first time since that tally began in 1940. The previous modern record low was set at 610 the previous week. Baker Hughes reported about 1,400 rigs idle in the U.S. last week. Using a different criteria, the Smith International count of U.S. active rigs fell seven units to 653 the week ended June 12, compared with a count of 910 the previous year. Baker Hughes predecessor Hughes Tool Co. began keeping monthly records of active U.S. rigs in January 1940. The lowest monthly count that year was 857. It changed to a weekly count in January 1949. The milestone was met wit calls for relief for the U.S. upstream sector from industry and government officials in Washington.

Not Available

1992-06-22T23:59:59.000Z

4

Oil-spill aftermath hampers rig research  

Science Journals Connector (OSTI)

... Mexico, scientists say that they have been struggling to gain access to the region's rigs and drill ships, hampering their research. Marine scientists have long been allowed to install ... ships, hampering their research. Marine scientists have long been allowed to install instruments on offshore structures. The equipment can deliver vital data that would not be practical to gather ...

Melissa Gaskill

2011-07-04T23:59:59.000Z

5

Inventory management of steel plates at an oil rig construction company .  

E-Print Network [OSTI]

??Keppel Fels produces make-to-order oil exploration rigs for the global market. Each rig requires close to 6000 metric tons of steel in the course of… (more)

Tan, Chien Yung

2006-01-01T23:59:59.000Z

6

Inventory management of steel plates at an oil rig construction company  

E-Print Network [OSTI]

Keppel Fels produces make-to-order oil exploration rigs for the global market. Each rig requires close to 6000 metric tons of steel in the course of its production. Optimal management of this steel is very critical in this ...

Tan, Chien Yung

2006-01-01T23:59:59.000Z

7

An energy-saving oil drilling rig for recovering potential energy and decreasing motor power  

Science Journals Connector (OSTI)

An energy-saving oil drilling rig is researched. A large accumulator is adopted in this rig to store the energy of the motor during the auxiliary time of lifting the drill stem and the potential energy of the drill stem when lowered. The equipped power of this rig decreases remarkably compared with the conventional drilling rig, and this rig can also recover and reuse the potential energy of the drill stem. Therefore, this rig owns remarkable energy-saving effect compared with the conventional drilling rig, and the energy-saving effect of the energy-saving oil drilling rig is also verified by the field tests. The mathematical model of the energy-saving oil drilling rig lowering the drill stem was derived and simulation analysis was conducted. Through simulation the curves of the drill stem lowering velocity and lowering displacement with time were obtained, and some conclusions were reached: (1) the heavier the drill stem lowered, the higher the lowering velocity is, and the shorter the lowering time is; (2) the smaller the displacement of the variable pump-motor, the higher the lowering velocity is, and the shorter the lowering time is.

Lujun Zhang

2011-01-01T23:59:59.000Z

8

Motor Drives of Modern Drilling and Servicing Rigs for Oil and Gas Wells  

Science Journals Connector (OSTI)

This paper provides a synthetic view on the most recent achievements in the field of drilling and servicing rig drives for oil and gas wells. This field is featuring ... kilowatts and speeds of 150–250 rpm for drilling

Aurelian Iamandei; Gheorghe Miloiu

2013-01-01T23:59:59.000Z

9

42nd Annual Reed rig census  

SciTech Connect (OSTI)

The eleven-year trend of attrition in the US rig fleet slowed significantly this year as only 12 rigs, or less than 1%, left the available fleet. The number of rotary rigs available for drilling in the US now stands at 1,841. but for the 42-year history of the Reed Tool Co. Rotary Rig Census, the 1973 available rig count of 1,767 remains the record low for yet another year. The count of rigs active during the 45-day census period also declined since last year's census. The active count was down 4.5% to 1,221 from 1,279 in 1993. As a consequence, rig utilization fell to 66.3% in 1994, from 69.0% last year. Notably, a strong shift to gas from oil drilling has occurred. Of the 1,221 rigs active in the census period, 540 were drilling for gas on the last well vs. 356 drilling for oil. Compared to last year, this is an increase in gas drilling of 29% and a decrease in oil drilling 22%. (Rigs targeting both oil and gas totaled 325 in 1994.)

Stokes, T.A.; Rodriquez, M.R. (Reed Tool Co., Houston, TX (United States))

1994-10-01T23:59:59.000Z

10

Rotary torque and rpm indicator for oil well drilling rigs  

SciTech Connect (OSTI)

Monitoring the torque applied by the rotary table to the drill string and the rpm of the drill string is provided. An intermediate adapter is positioned between the drill kelly and the rotary table. A strain gauge is attached to the intermediate adapter to measure torsional deformation and provide an indication of rotary torque. Transmission of torque data is accomplished by radio frequency transmission utilizing a transmitter on the intermediate adapter. A receiver is mounted to the side of the drill rig floor to receive and demodulate the torque signal. The intermediate adapter is rotating at the same rate as the drill string. Detection of the revolutions utilizing the changing R.F. Field strength is accomplished at the edge of the drill rig platform or elsewhere with a stationary sensor which doubles as the torque receiver. A highly directional torque transmitter antenna mounted on the adapter is used with the major lobe lying parallel to the rig floor and perpendicular to the pipe. By detecting the envelope of the radio frequency field strength, each rotation is marked by a peak. This enables continuous torque and rpm monitoring.

Chien, L.C.

1981-08-25T23:59:59.000Z

11

Rig activity; 1989 was the worst year on record  

SciTech Connect (OSTI)

This article discusses the quantity of oil rotary rigs running in the United States during 1989. Rotary rigs running in 1989 averaged 870, down 7.1% from 1988 and arguably the worst performance since anyone bothered to count. A quick check into dusty historical records reveals that in 1942 the rotary rig count averaged 761 (this was the result of a deliberate government policy of scaling back drilling). However, the number is misleading, because in the early 1940s cable-tool rigs were around 40% to 45% of the total operating at any given time.

Not Available

1990-02-01T23:59:59.000Z

12

Rig activity; 1991 is now the worst year on record  

SciTech Connect (OSTI)

This paper reports that U.S. rotary oil well drilling rig activity reached year-end levels above 1,100 rigs and averaged over 1,000 in 1990, the first increase since 1984. In 1991, however, operating rigs dropped once again, this time to an all time recorded low and once again, most forecasters erred on the high side. Rotary rigs running in 1991 averaged 862.8, a 14.4% drop below the 1990 activity level of 1007.8 rigs. The rig count, began at 1,068 in January, but fell steadily for the remainder of the year. A brief upturn at mid-year failed to hold up and the year-end increases in drilling we had come to expect since 1986 never materialized.

Not Available

1992-02-01T23:59:59.000Z

13

155The Great Gulf Oil Catastrophe of 2010 NASA's Terra satellite flew over the Deepwater Horizon rig's oil spill in the Gulf  

E-Print Network [OSTI]

rig's oil spill in the Gulf of Mexico on Saturday, May 1 and captured the above natural-color image of Mexico. NOAA's estimated release rate of oil spilling into the Gulf is 200,000 gallons per day since/meter 2 ? B) kg/meter 2 ? Problem 4 ­ The density of crude oil is about D=850 kg/m 3 . From your estimate

14

Rig Efficiency Paper  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

"active" annual rig count which is an imprecise and subjective task. Baker Hughes, 5 Smith, 6 ReedHycalog (Now NOV), 7 Schlumberger, 8 and IADC 9 publicly report the number of...

15

39th annual Reed rig census  

SciTech Connect (OSTI)

This paper reports on cutbacks in U.S. exploration and development drilling during the first half of 1991 which squeezed most of the optimism out of the drilling industry. Just how rough the year has been is underscored by the results of this year's rig census. The number of rotary rigs available for U.S. drilling declined by only 69 units (3%) during the past 12 months. But despite those withdrawals from competition, only 66% of the remaining rigs were working at the time the census was taken. Results of the 1991 census contrasted sharply with the stability and optimism that seemed apparent a year ago when 72% of the available rig fleet met the census definition of active. At that time, the mini-boom in horizontal drilling coupled with tax-credit- driven gas drilling led to a relatively high rig utilization rate and suggested that rig supply and demand might be close to an economically acceptable balance. However, it quickly became apparent in early 1991 that industry optimism was unjustified. Horizontal drilling began to drop and the lowest natural gas prices in 12 years triggered rapid declines in gas drilling. Although oil prices have been relatively stable and above $18 per bbl since January 1989, most major operators have concluded that a better return on investment can be had outside the U.S. and have drastically cut their domestic drilling budgets. These factors, combined with softened energy demand from the worldwide recession, further slowed U.S. drilling. The long awaited balance between rig supply and demand has seemingly slipped away. The 1991 Reed rig census describes an industry facing several more rough years. Details of this year's census include: The available U.S. fleet now stands at 2,251 rigs, down by 69 from the 2,320-unit total in 1990, and the lowest since 1976. Rigs meeting the census definition of active numbered 1,485, down 192 (11.4%) from the 1,677 active rigs counted a year earlier.

Crowhurst, M.E.; Fitts, R.L. (Reed Tool Co., Houston, TX (US))

1991-10-01T23:59:59.000Z

16

44. Annual Reed rig census  

SciTech Connect (OSTI)

Reed Tool Company`s 44th annual rotary rig census found a spirit of increased optimism in the US oil and gas drilling industry. Rig utilization rose to 77% this year, the highest since the boom times of 15 years ago. A combination of a higher number of active rigs and another decline in available units to a historical low, led to this higher-than-average utilization rate. The paper discusses results from the survey.

Stokes, T.A.; Rodriguez, M.R. [Reed Tool Co., Houston, TX (United States)

1996-10-01T23:59:59.000Z

17

34th annual reed rotary rig census  

SciTech Connect (OSTI)

This article reports that the number of rigs active according to the 1986 census is 1052, which represents a decline of 1573 rigs from 1985 figures. This 60 percent decrease is the largest decline of active rigs in the 34-year history of the census. The 1986 census takers found 3993 rigs are available with the capacity to drill deeper than 3000 ft. The count has thus declined by 416 rigs (9 percent) from the 1985 total of 4409. Rig availability declined for the fourth consecutive year following nine straight years of fleet expansion (1974-1982). During the past four years, 1651 rigs have been removed from the drilling fleet representing a 29 percent decline from the record high number of rigs available in 1982. The 1986 decline in the available U.S. fleet is considerably less than what many industry observers had been anticipating. A larger decrease in the rig fleet has not been realized for a number of reasons.

Hutchinson, D.L.; Pastusek, P.E.

1986-10-01T23:59:59.000Z

18

Design, fabrication and testing of a bearing test rig and preliminary studies on oil mist lubrication  

E-Print Network [OSTI]

three microns in diameter. The oil mist generated by the mist generator can be conveyed up to 500 ft. through pipes, also known as main headers at velocities up to 22 fps. (2, 3). The turbulence induced by higher velocities causes coalescence... at the bottom of the pipe. In order to prevent clogging of the smaller distribution pipes or reclassifiers with oil, the main header system is This thesis follows the form and style of STLE journal, i i n n in rin sloped back toward the generator so...

Shamim, Abdus

2012-06-07T23:59:59.000Z

19

36th annual Reed rig census  

SciTech Connect (OSTI)

For the sixth straight year, the number of rigs available in the U.S. declined. Five hundred and seventy-nine rotary rigs dropped out of drilling industry competition during the past 12 months as attrition forced rig supply closer toward balance with demand. Significant highlights of this year's census are: The U.S. rig fleet now stands at 2,752 drilling rigs, a 17.4% reduction from the census count in 1987. This is the largest percentage decline and the third largest absolute decline in available rigs in census history; The 1988 census active count was 1,532 rigs, up 10% over 1987; The 1988 census utilization rate was 55.7%, up from the 41.7% reported last year and a 110% improvement over the all-time low of 26.3% in 1986; Every region in the country reported a reduction in total available rigs. Each region also reported an increase in the active ring count with the exception of Ark-La-Tex; California had the highest utilization rate in the census (63.9%), and all regions reported a utilization rate greater than 50% with the exception of Ark-La-Tex, which reported a 45.5% rate; The number of rig owners declined 12% from 691 to 608. The decline in available rigs would have been greater, but owners brought back 226 rigs that had been dropped from previous census tabulations.

Fitts, R.L.; Crowhurst, M.E. (Reed Tool Co., Houston, TX (US))

1988-10-01T23:59:59.000Z

20

Odessa fabricator builds rig specifically for geothermal drilling  

Broader source: Energy.gov [DOE]

For 35 years, MD Cowan has built drilling rigs, developing a market for its Super Single® rig for use in the nation's oil and gas fields. Now the Odessa-based company is branching out into alternative energy.

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

12-i Chapter 12 Rigging Hardware CHAPTER 12 RIGGING HARDWARE This chapter provides requirements for rigging accessories used in hoisting and rigging - shackles, eyebolts, eye nuts, links, rings, swivels, wire-rope clips, turnbuckles, rigging hooks, and load-indicating devices and implements the requirements of ANSI/ASME B30.26, "Rigging Hardware" (for latest ASME standards, see http://catalog.asme.org/home.cfm?Category=CS). 12.1 GENERAL..................................................................................................................................12-1 12.1.1 Good and Bad Rigging Practices ...................................................................................12-1 12.2 RIGGING HOOKS.....................................................................................................................12-5

22

Hoisting & Rigging Fundamentals  

Broader source: Energy.gov (indexed) [DOE]

Hoisting and Rigging Hoisting and Rigging Fundamentals for Riaaers and ODerators Pendant Control - Components TR244C, Rev. 5 December 2002 TR244C Rev . 5 TABLE OF CONTENTS INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii HOISTING AND RIGGING OBJECTIVES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 WIRE ROPE SLINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SYNTHETIC WEBBING SLINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I O CHAINSLINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 METAL MESH SLINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 SPREADER BEAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 RIGGING HARDWARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

23

The Oil and Gas Journal databook, 1986 edition  

SciTech Connect (OSTI)

This annual contains the following: Foreword by Gene Kinney; OGJ 400; Crude Oil Assays; Worldwide Petrochemical Survey; Midyear Forecast and Review; Worldwide Gas Processing Report; Ethylene Report; Sulfur Survey; International Refining; Catalyst Compilation; Pipeline Economics Report; Worldwide Production and Refining Report; Annual Refining Survey; Morgan Pipeline Cost Index, Oil and Gas; Nelson Cost Index; Hughes Rig Count; Smith Rig Count; OGJ Production Report and the API Refinery Reports. Also featured is the Oil and Gas Journal Index, which lists every article published in the Journal in 1985, referenced by article title or subject.

Not Available

1986-01-01T23:59:59.000Z

24

Factors influencing the incidence rates of injuries and accidents among seafarers and rig workers providing support to the WA offshore oil and gas industry.  

E-Print Network [OSTI]

??The aim of this study was to identify, discuss and make recommendations regarding causal factors associated with injuries and accidents among seafarers and rig workers… (more)

Martinovich, Tony, Dr

2013-01-01T23:59:59.000Z

25

40th annual Reed rig census  

SciTech Connect (OSTI)

This paper reports that declines characterize the 1992 rig census-in the number of available drilling rigs, in the number of active rigs, in rig utilization rate, in the number of rig owners and in industry optimism. The number of rotary rigs available for U.S. drilling fell by 255 units (11.3%) during the past 12 months, an attrition rate almost four times greater than in 1991. But despite the high attrition, only 59.7% of remaining rigs were working during the time the census was taken. Results of the 1992 census bring emphasis to an industry trend that became apparent in early 1991. The major oil companies, and many independents, continued their exodus form the U.S., and the remaining independents, which were hurt by low natural gas prices and unfavorable tax treatment of intangible drilling costs, were not able to pick u the drilling slack. Consequently, the past year has been disastrous for many U.S. drilling contractors, and the outlook for this industry segment remains bleak.

Fitts, R.L.; Stokes, T.A. (Reed Tool Co., Houston, TX (United States))

1992-10-01T23:59:59.000Z

26

Four rigs refurbished for West Africa drilling  

SciTech Connect (OSTI)

In April and May 1990, Shell Petroleum Development Co. of Nigeria Ltd. awarded Noble Drilling West Africa Inc. four separate contracts to drill oil and gas wells in the inland waterways of Nigeria. The contracted rigs included a shallow water jack up, the NN-1, and three posted barges, the Gene Rosser, the Chuck Syring, and the Lewis Dugger. The jack up was built in 1978, and the three posted barges are 1980s vintage. Three of the rigs have been idle for a number of years. The Shell Nigeria contracts required major modifications to the rigs before putting them into international service. Noble replaced or refurbished all major pieces of equipment in the drilling, power, and service systems on the rigs. Rig crews serviced all other equipment. A significant amount of general service piping and electrical wiring was replaced. Each rig also required additional motor control centers to support the new drilling and mud processing equipment. Alfa-Laval waste-heat water desalination plants and new sewage treatment units were installed on all four rigs. Because of the tidal variances and high silt conditions expected in the African waterways, all engine cooling systems were converted from heat exchangers to radiators. Rotary tables were made common on all rigs at 37 1/2 in. Noble had all traveling equipment completely inspected and modified as necessary. Strict attention was paid to certification and documentation of all equipment. Safety upgrades conformed to both Shell and Noble standards. Fire and gas detection systems were installed throughout each rig. Water and foam deluge systems were installed in the wellhead areas, and new foam systems and monitors were installed on the helldecks.

Not Available

1991-06-10T23:59:59.000Z

27

Hoisting & Rigging Assessment Form  

Broader source: Energy.gov [DOE]

  Assess the institutional and department/division hoisting and rigging (including forklift, overhead cranes small hoists, and mobile cranes) requirements, policies, procedures, and work practices...

28

Oil and gas journal databook, 1987 edition  

SciTech Connect (OSTI)

This book is an annual compendium of surveys and special reports reviewed by experts. The 1987 edition opens with a forward by Gene Kinney, co-publisher of the Oil and Gas Journal and includes the OGJ 400 Report, Crude Oil Assays, Worldwide Petrochemical Survey, the Midyear Forecast and Reviews, the Worldwide Gas Processing Report, the Ethylene Report, Sulfur Survey, the International Refining, Catalyst Compilation, Annual Refining Survey, Worldwide Construction Report, Pipeline Economics Report, Worldwide Production and Refining Report, the Morgan Pipeline Cost Index for Oil and Gas, the Nelson Cost Index, the Hughes Rig Count, the Smith Rig Count, the OGJ Production Report, the API Refinery Report, API Crude and Product Stocks, APU Imports of Crude and Products, and the complete Oil and Gas Journal 1986 Index of articles.

Not Available

1987-01-01T23:59:59.000Z

29

Planning and scheduling a fleet of rigs using simulation-optimization  

Science Journals Connector (OSTI)

Some of the most important and expensive activities in the oil field development and production phases relate to using rigs. These can be used for drilling wells, or for maintenance activities. As rigs are usually scarce compared to the number of wells ... Keywords: Planning, Rigs, Scheduling, Simulation-optimization

Hugo ViníCius Bassi; VirgíLio Jose Martins Ferreira Filho; Laura Bahiense

2012-12-01T23:59:59.000Z

30

Odessa fabricator builds rig specifically for geothermal drilling...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

in the nation's oil and gas fields. Now the Odessa-based company is branching out into alternative energy. The company recently delivered its first Thermal Single rig, a...

31

Build a Floating Oil Rig  

Broader source: Energy.gov [DOE]

The U.S. Department of the Interior's Minerals Management Service developed this teacher's guide about the many energy resources found in, over, and under the ocean. Includes sections on petroleum,...

32

The oil and gas journal databook, 1991 edition  

SciTech Connect (OSTI)

This book provides the statistical year in review plus selected articles that cover significant events of the past year. In addition, the Data Book features the popular surveys and special reports that quantify industry activity throughout the year. This book contains information on Midyear forecast and review; Worldwide gas processing report; Ethylene report; Sulfur survey; International refining survey; Nelson cost index; Smith rig count; API refinery report; API imports of crude and products; The catalyst compilation; Annual refining survey; Worldwide construction report; Pipeline economics report; Worldwide production and refining report; Morgan pipeline cost index for oil and gas; Hughes rig count; OBJ production report.

Not Available

1991-01-01T23:59:59.000Z

33

Chapter 10 - RIGGING HARDWARE  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ASME, DOERL-92-36 and the Rigging Hardware manufacturers' requirements. It is the responsibility of the user of this manual to implement all of the requirements from listed...

34

International land rig locator  

SciTech Connect (OSTI)

Mechanical specifications, ratings, locations, and status are listed for each of the 5,000 contract rotary drilling rigs operated by the more than 700 independent drilling contractors throughout the Free World.

Not Available

1984-03-01T23:59:59.000Z

35

International land rig locator  

SciTech Connect (OSTI)

Mechanical specifications, ratings, locations, and status are listed for each of the 5,000 contract rotary drilling rigs operated by more than 700 independent drilling contractors throughout the Free World.

Not Available

1983-09-01T23:59:59.000Z

36

EIA-23L Reserves Information Gathering System (RIGS)  

Gasoline and Diesel Fuel Update (EIA)

EIA-23L Reserves Information Gathering System (RIGS) EIA-23L Reserves Information Gathering System (RIGS) Released: April 16, 2013 Background The Form EIA-23L, "Annual Survey of Domestic Oil and Gas Reserves, " is used to collect data on reserves of crude oil, natural gas, and natural gas liquids. These data are used to develop national and regional estimates of proved reserves of domestic crude oil, natural gas, and natural gas liquids, and to facilitate national energy policy decisions. Reporting on the Form EIA-23L is mandatory. Reserves Information Gathering System The Form EIA-23L Reserves Information Gathering System (RIGS), provides respondents with an efficient and effective means for filing the form using a personal computer (PC). Hardware / Software Requirements The minimum hardware requirements needed to install and use RIGS are:

37

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-1090-2011 DOE-STD-1090-2011 September 2011 Superseding DOE-STD-1090-2007 August 2007 DOE STANDARD HOISTING AND RIGGING U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. INCH-POUND INTENTIONALLY BLANK DOE-STD-1090-2011 iii Introduction The U.S. Department of Energy (DOE) Hoisting and Rigging Standard is intended to be used by supervisors, line managers, safety personnel, equipment operators, riggers and other personnel responsible for the safety of hoisting and rigging operations at DOE sites. It may be used as either contract document or as a best practices guide at the site's or program office's discretion. The standard invokes applicable OSHA and national consensus standards but also delineates

38

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

13-i CHAPTER 13 LOAD HOOKS This chapter provides safety standards for the inspection, testing, and maintenance of load hooks installed on cranes or hoists and implements the requirements of ASME B30.10, Chapter 10-1, "Hooks." See Chapter 12, "Rigging Accessories," for rigging hook requirements (for latest ASME standards, see http://catalog.asme.org/home.cfm?Category=CS). 13.1 GENERAL ...............................................................................................................................13-1 13.1.1 Marking......................................................................................................................13-1 13.1.2 Attachments ...............................................................................................................13-1

39

Design of a bicycle rig  

E-Print Network [OSTI]

A design of a bicycle (bike) rig was conducted. This bike rig is designed to be used for aerodynamics measurement testing of bicycles, cyclists and cycling related items in a wind tunnel. This paper discusses the design ...

Racz, Rastislav

2010-01-01T23:59:59.000Z

40

Rigs to reefs: a petroleum industry perspective  

E-Print Network [OSTI]

, by implementing an ocean dumping program in conjunction with a rigs-to-reefs program, and through the development of new technology and methods to reduce transportation costs. Zn addition, the overall cost to industry participation can be reduced through... Environmental Enhancement and Fishing in the Seas (REEFS)" Task Force. This task force was comprised of representatives of federal and state government agencies, the oil and ocean industries, and the commercial and recreational fishing communities. Secretary...

Dubose, William Perry

1988-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Doubts swirl around plan to use rigs as reefs  

Science Journals Connector (OSTI)

... Offshore oil platforms could be allowed to remain in place as artificial habitats for marine life ... oil stops flowing, and to leave the sites as they found them. But the Rigs to Reefs Act of 2003, which is sponsored by Representative David Vitter (Republican, ...

Betsy Mason

2003-10-30T23:59:59.000Z

42

Deepwater Horizon Study Finds Crude Oil Harmful to Bluefin, Yellowfin Tuna  

E-Print Network [OSTI]

occurred on April 20, 2010 when the Deepwater Horizon oil-drilling rig collapsed and exploded, leaving oil

Grosell, Martin

43

New depths with mobile rig  

SciTech Connect (OSTI)

Magee-Poole Drilling Company, a drilling contractor operating out of the south Texas drilling center of Alice, claims it operates the largest mobile drilling rig in the world. That is, it's the only wheel mounted portable rig that drills to 16,000 feet with 4 1/2-inch drill pipe - at least 3000 feet deeper than the previous mobile drilling rig ratings. The unit is designated the Ingersoll-Rand 1500 Series. What's more significant, according to co-owner Don Magee, is that the rig's portability gets the rotary table turning to the right sooner; it drills more footage per year. It rigs up in 1 1/2 days versus 3 to 4 days for a conventional skid type rig normally used at these depths. The unit's compact arrangement, with more components combined into single loads, makes possible its higher mobility. A conventional skid rig might require 25 to 30 truckloads to move the rig components, mud system, fuel and water tank, houses for utilities, storage and crew change, generators, and drill pipe. The new rig moves in anywhere from four to nine loads less. Further, the rig components weigh less without sacrificing durability.

Not Available

1982-03-01T23:59:59.000Z

44

Experimental study on the model of the correlation between the movement of the drilling string with big diameter of drill and effects on the oil rigs  

Science Journals Connector (OSTI)

In the author’s view, an important contribution is to clarify the interaction of a drill string and unconventional hoisting system, we find the influence of the constructive peculiarities oil installations (drilling

Marius Stan; Lazar Avram

2014-08-01T23:59:59.000Z

45

Hoisting & Rigging Assessment Plan  

Broader source: Energy.gov (indexed) [DOE]

HOISTING & RIGGING HOISTING & RIGGING Assessment Plan NNSA/Nevada Site Office Facility Representative Division Performance Objective: To determine that hoisting and rigging operations are conducted according to "industry best standards" for increasing equipment reliability while assuring worker safety, and to verify issues being addressed in BN Hoisting assessment. Criteria: Lifts are identified and categorized appropriately for scheduled maintenance. DOE-STD-1090-2001 An integrated process ensures safety issues are identified and controls established. DOE-STD-1090-2001 Personnel operating and maintaining the hoisting equipment are trained; they understand their roles and responsibilities. DOE-STD-1090-2001 Maintenance conducts safety inspections of hoisting and rigging

46

Hoisting & Rigging Assessment Plan  

Broader source: Energy.gov (indexed) [DOE]

HOISTING & RIGGING HOISTING & RIGGING Assessment Plan NNSA/Nevada Site Office Facility Representative Division Performance Objective: To determine that hoisting and rigging operations are conducted according to "industry best standards" for increasing equipment reliability while assuring worker safety, and to verify issues being addressed in BN Hoisting assessment. Criteria: Lifts are identified and categorized appropriately for scheduled maintenance. DOE-STD-1090-2001 An integrated process ensures safety issues are identified and controls established. DOE-STD-1090-2001 Personnel operating and maintaining the hoisting equipment are trained; they understand their roles and responsibilities. DOE-STD-1090-2001 Maintenance conducts safety inspections of hoisting and rigging

47

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

1-i 1-i CHAPTER 11 WIRE ROPE AND SLINGS This chapter provides requirements for the fabrication and use of wire rope and slings used in hoisting and rigging and implements the requirements of ASME B30.9, Slings (for latest ASME standards, see http://catalog.asme.org/home.cfm?Category=CS). . 11.1 GENERAL ...............................................................................................................................11-1 11.2 WIRE ROPE ............................................................................................................................11-4 11.2.1 Wire-Rope Lays .........................................................................................................11-4 11.2.2 Wire-Rope Cores .......................................................................................................11-4

48

Comparing rig power transmission systems  

SciTech Connect (OSTI)

Installed power on drilling rigs has increased steadily since the inception of rotary drilling technology as a result of technical advances and the need to penetrate deeper horizons. Higher power levels for the pumps, rotary table and drawworks are also required for drilling deep wells within an economically reasonable period. Power initially available on a rig had been about 35 kW on average, whereas power values on modern rigs drilling ultra-deep wells are on the order of several thousand kW. The installed power values on modern drilling rigs, subdivided with respect to depth range, are shown. After safety, economic factors are of paramount importance to rig operators. Among these, which include low acquisition cost, long service life and ease of maintenance, a particularly decisive factor is high efficiency.

Gutsche, W.; Noevig, T.

1989-04-01T23:59:59.000Z

49

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

4 4 BELOW-THE-HOOK LIFTING DEVICES 14-i This chapter provides the requirements for below-the-hook lifting devices used in hoisting and rigging, such as spreader bars, lifting yokes, and lift fixtures. This section implements the requirements of ASME B30.20, "Below-the-Hook Lifting Devices" (for latest ASME standards, see http://catalog.asme.org/home.cfm?Category=CS). NOTE: Special lifting devices for shipping containers weighing 10,000 lb or more that are used for radioactive materials are governed by ANSI N14.6 ["Standard for Special Lifting Devices for Shipping Containers Weighing 10,000 Pounds (4,500 kg) or More for Nuclear Materials."] 14.1 GENERAL ...............................................................................................................................14-1

50

Focus on rotary drill rigs  

SciTech Connect (OSTI)

This article discusses the drill rig, focusing on the rotary drill rigs. There are two principal drilling methods - rotary and percussion. In certain situations, percussion drilling is the most practical method, but for most applications, rotary drilling using the rotary-tricone bit with either steel-toothed cones or carbide inserts, is the common and accepted drilling technique. There are four principal reasons for a rotary drill rig: to provide power to the rotary-tricone bit; to provide air to clean the hole; to provide a life-support system for the rotary-tricone bits; and, to provide a stable and efficient platform from which to drill the hole.

Schivley, G.P. Jr.

1987-06-01T23:59:59.000Z

51

Electricity on the rig. Part 3 - New electric rig technology  

SciTech Connect (OSTI)

The use of an SCR-controlled power system on an offshore drilling rig has lead to an increased acceptance of high technology equipment. Such equipment increases drilling productivity, reduces maintenance, and improves reliability. Most new rigs now have AC squirrel cage motors, brushless AC generators, silicon controlled rectifiers, DC motors, and swtichgear and motor starters. Several opportunities for cost reductions in SCR systems, such as improving the power factor, are studied in this paper.

McNair, W.L.

1983-07-01T23:59:59.000Z

52

Solar stirling engine rig tests  

Science Journals Connector (OSTI)

A description of a prototype four-cylinder Stirli ng engine construction with the heat receiver of the concentrated solar radiant flux and with a swashplate drive is given. The rig tests have been carried out ...

I. A. Tursunbaev; E. P. Orda; A. I. Lezhebokov; A. P. Korobkov…

2010-11-01T23:59:59.000Z

53

Earth drill rig  

SciTech Connect (OSTI)

This patent describes an earth drill rig wherein an upwardly and downwardly moving drill-string-turning rotary table is rotated by a kelly bar connected at its lower end to a vertical drive shaft, the kelly bar being journalled for rotation in and fixed against axial movement with respect to a drill frame assembly and the rotary table being mounted for axial movement on and along the drill frame assembly. The drill frame assembly is pivotally mounted on a vehicle on a substantially horizontal axis for pivoting between an upright position and a substantially horizontal position for transportation. The improvement described here comprises the drill frame assembly pivot axis positioned below the lower end of the kelly bar and above the upper end of the vertical drive shaft, and a universal coupling connecting the lower end of the kelly bar and the vertical drive shaft the universal coupling comprising universal joints at opposite ends of an elongated slip joint connector and connected there-by for relative axial movement but driving coupling between the universal joints. The universal joints lie generally on a circle of which the drill frame assembly pivot axis is the center. The drill frame assembly can be moved between the upright and the substantially horizontal positions without disconnecting the kelly bar from the vertical drive shaft, the kelly bar being revolvable by the drive shaft through substantially the entire range of movement of the drill frame assembly.

Rassieur, C.L.

1987-01-27T23:59:59.000Z

54

Drill rig hook  

SciTech Connect (OSTI)

A hook for suspending a pipe string or other load in a well rig, including a tubular outer body supported by a first connector structure which is attachable to a suspending line, a tubular inner body which supports a second connector structure preferably taking the form of a hook, with the inner body being received within the outer body and being yieldingly urged upwardly relative thereto by a resilient unit or assembly located within the inner body, and with a structure within the inner body bearing upwardly against and supporting the resilient assembly and attached to the first connector structure. A cam mechanism between the inner and outer bodies automatically cams the inner body to a predetermined rotary position upon upward movement, with a locking device or devices serving to retain the inner body in fixed rotary position and/or to lock the camming mechanism in a fixed position in a manner determining the rotary setting to which the inner body returns upon upward movement. The mentioned first and/or second connectors may each consist of two parts receivable within one of the tubular bodies and held in operative connecting engagement therewith by a spacer between the two parts. A link suporting member may be formed separately from the load suporting hook, to be detachable therefrom for a repair or replacement.

Zimmermann, A.

1985-02-12T23:59:59.000Z

55

Planning and scheduling a fleet of rigs using simulation–optimization  

Science Journals Connector (OSTI)

Some of the most important and expensive activities in the oil field development and production phases relate to using rigs. These can be used for drilling wells, or for maintenance activities. As rigs are usually scarce compared to the number of wells requiring service, a schedule of wells to be drilled or repaired must be devised. The objective is to minimize opportunity costs within certain operating constraints. This paper present the first stochastic approach to deals with the problem of planning and scheduling a fleet of offshore oil rigs, where the service time is assumed being uncertain. A simulation–optimization method is used to generate “expected solutions” and performance measures for rigs, as well as statistics about well allocation to rigs. The methodology can be used in two different ways – to schedule an existing fleet of rigs or to scale the size of the fleet – both contemplating the uncertain nature of the problem. The method’s expected results include performance measures for each rig, expected delay for a well to be served, the expected schedule of rigs, and a distribution of the well servicing order. The experiments based on real situations demonstrate the effectiveness of the simulation–optimization approach.

Hugo Vinícius Bassi; Virgílio Jose Martins Ferreira Filho; Laura Bahiense

2012-01-01T23:59:59.000Z

56

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

9-2004 9-2004 12-i Chapter 12 Rigging Accessories CHAPTER 12 RIGGING ACCESSORIES This chapter provides requirements for rigging accessories used in hoisting and rigging - shackles, eyebolts, rings, wire-rope clips, turnbuckles, rigging hooks, and load-indicating devices. 12.1 GENERAL ...............................................................................................................................12-1 12.1.1 Inspections .................................................................................................................12-1 12.1.2 Testing .....................................................................................................................12-3 12.1.3 Good and Bad Rigging Practices ...............................................................................12-3

57

rig upgrades2.qxp  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

T R A P E D O F E N E R G Y E T A T S D E T I N U S O F A M E R I C A E A s the oil and gas industry continues to drill in more remote areas, at deeper depths, and in more...

58

,,,,,"Rig: TOI Discoverer Enterprise"  

Broader source: Energy.gov (indexed) [DOE]

Well: OCS-G 32306 002 ST00BP00",,,,"Flow Data" Well: OCS-G 32306 002 ST00BP00",,,,"Flow Data" ,,,,,"Field: Mississippi Canyon 252" ,,,,,"Rig: TOI Discoverer Enterprise" ,,,,,"Choke Manifold",,,,"Rates",,,,,,,,,"Ratio" "Date","Time","Choke A","Choke B","BSW","WHPres","WHTemp","WHDCP","WHDCTemp","Gas Rate","Gas Cum","Uncorrected ","Uncorrected ","Water Rate","Water Cum","Uncorrected ","Uncorrected ","Cumulative Oil ","GOR1","Comments" ,,,,,,,,,,,"Oil Rate","Oil Cum ",,,"Liquid Rate","Liquid Cum","from Cargo "

59

45th annual Reed rig census  

SciTech Connect (OSTI)

Since 1983, Reed Tool Co.`s annual rotary rig census has reported 14 consecutive annual reductions in the U.S. rig fleet. This year, the downward trend has reversed and more rigs have been added to the available fleet than have left. Robust drilling activity has also spurred higher rig utilization in 1997. Utilization climbed to 86.9% this year, more than ten percentage points higher than a year ago and the highest since 1981. Data and trends are discussed.

Stokes, T.A.; Rodriguez, M.R. [Reed Tool Co., Houston, TX (United States)

1997-10-01T23:59:59.000Z

60

Hoisting and Rigging Technical Advisory Committee  

Broader source: Energy.gov [DOE]

The Hoisting and Rigging Technical Advisory Committee serves as an advisory body to the Office of Health, Safety and Security (HSS) by providing support to their policy efforts aimed at ensuring the safe performance of hoisting and rigging activities at DOE facilities and in the review and resolution of identified generic hoisting and rigging safety issues.

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Hoisting & Rigging Lift Plan  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Hoisting & Rigging Lift Plan Hoisting & Rigging Lift Plan Stanford Synchrotron Radiation Laboratory May 16, 2005 SSRL-HRLP-000-R0 Page 1 of 3 General Information Lift Plan Document # Plan prepared by: Describe the load or items to be lifted: Could the load, if dropped, release hazardous materials or radioactivity? No Yes (describe) Is the load irreplaceable or would it be very costly to replace if damaged? No Yes (describe) Brief description of lift activities (specify if rolling or flipping involved) Equipment Information Equipment ID: Equipment custodian: Rated capacity: Operator capacity : Personnel Protective Equipment (PPE) Steel-toed shoes Required for all personnel involved with lift activity to protect from crushing of feet/toes

62

Risk analysis of jackup rigs  

Science Journals Connector (OSTI)

Increasing attention has been focussed in the North Sea and elsewhere on the quantification of the risks of working in a hazardous enviroment: the offshore world. The perception of risk with respect to mobile rigs has often been vague and uninformed. This paper attempts to put the risks with respect to jackup rigs into perspective by quantifying them and comparing them to other risks. This paper contains a few risk comparisons with fixed platforms, semi-submersibles, and drillships. Historical casualties are used in an example to show how a change intended to make an operation safer, may result in the opposite effect. Examining risks from losses due to environmental overload, the conclusion is reached that jackups are very safe structures: there appears to be no jackup, in the timeframe examined, that has been lost because of a deficiency in the calculation methods currently in use by knowledgeable experts.

B.P.M. Sharples; W.T. Bennett Jr; J.C. Trickey

1989-01-01T23:59:59.000Z

63

Outlook for U.S. shale oil and gas  

Gasoline and Diesel Fuel Update (EIA)

shale oil and gas shale oil and gas IAEE/AEA Meeting January 4, 2014 | Philadelphia, PA By Adam Sieminski, EIA Administrator Key insights on drilling productivity and production trends Adam Sieminski, IAEE/AEA January 4, 2014 2 * The U.S. has experienced a rapid increase in natural gas and oil production from shale and other tight resources * Six tight oil and shale gas plays taken together account for nearly 90% of domestic oil production growth and virtually all domestic natural gas production growth over the last 2 years * Higher drilling efficiency and new well productivity, rather than an increase in the rig count, have been the main drivers of recent production growth * Steep legacy production decline rates are being offset by growing

64

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

5 5 CONSTRUCTION HOISTING AND RIGGING EQUIPMENT REQUIREMENTS 15-i Chapter 15 Construction Hoisting and Rigging Equipment Requirements This chapter outlines the requirements for the safe use of hoisting and rigging equipment on construction projects at DOE installations. 15.1 GENERAL ...............................................................................................................................15-1 15.2 PERSONNEL QUALIFICATIONS.........................................................................................15-2 15.2.1 Qualified Operators of Mobile Cranes.......................................................................15-2 15.2.2 Qualified Operators of Forklift Trucks ......................................................................15-3

65

Group Based Rigging of Realistically Feathered Wings  

E-Print Network [OSTI]

for feather interpenetration resulting from movement from extended to folded wing poses [Hiebert 3 et al. 2006]. The rigging method developed for this thesis provides a single rig and control solution for animation that includes both outstretched... be highly detailed and as anatomically accurate as a mythical creature can be. A big challenge to this was the look and actions of the feathers [Hiebert et al. 2006]. The feathers on the gryphons (coverts, and body feathers) were generated procedurally...

Howard, Heather Vernette

2012-02-14T23:59:59.000Z

66

Electricity on the rig; part I -- electric applications on drilling and workover rigs  

SciTech Connect (OSTI)

This article points out that not only have electric motors replaced diesel engines and mechanical transmissions, but solid-state equipment is rapidly taking the place of rotary equipment in variable speed drivers and control systems. The SCR (silicon controlled rectifier) type of speed control has replaced other types by a large margin of acceptance on drilling rigs and has begun to be used on workover and service rigs. In most cases, electrical power is generated at the rig site with diesel-AC generators. On mechanically driven rigs, single diesel-generator sets operate to supply power for lighting and electrical motor loads. When high levels of power are required, such as on SCR-powered rigs, multiple generators are operated in electrical-parallel and each contributes to the total power required.

McNair, W.L.

1983-03-01T23:59:59.000Z

67

CONGRESS BLASTS OIL INDUSTRY  

Science Journals Connector (OSTI)

IN PACKED HEARINGS last week before angry members of Congress, the heads of BP, ExxonMobil, Chevron, ConocoPhillips, and Shell Oil defended their industry in light of the April 20 BP oil rig explosion in the Gulf of Mexico, which has led to the worst ...

JEFF JOHNSON

2010-06-21T23:59:59.000Z

68

Selectively fired, tubing-conveyed perforating guns save rig time  

SciTech Connect (OSTI)

Selective firing of tubing-conveyed perforating (TCP) guns during drill stem tests (DSTs) added flexibility and saved costs for Marathon Oil Co. As an example, in the Garland field in Wyoming, the guns allowed perforating multiple zones in one trip. This saved 1 1/2--2 days/well in rig time and $25,000--30,000/well in electric wire line and DST tool charges. For international offshore operations, savings of $200,000/well appear possible. Savings result not only from perforating multiple zones, but also from arbitrarily setting firing patterns with or without zone isolation. The paper describes the testing of equipment, the design of the guns, firing heads, crossover assembly, pressure isolation sub, control line, and select-fire sub, and applications for the guns.

Snider, P.M. (Marathon Oil Co., Houston, TX (United States)); Bond, P.L. (Halliburton Energy Services, Dallas, TX (United States))

1993-07-19T23:59:59.000Z

69

DOE-STD-1090-99; DOE Standard Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

TS TS INCH-POUND DOE-STD-1090-99 March 1999 Superseding DOE-STD-1090-96 September 1996 DOE STANDARD HOISTING AND RIGGING (Formerly Hoisting and Rigging Manual) U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE STANDARD HOISTING AND RIGGING (Formerly Hoisting and Rigging Manual) Summary of Changes as of March 1999

70

DOE-STD-1090-2007; Hoisting and Rigging Standard (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

5 5 CONSTRUCTION HOISTING AND RIGGING EQUIPMENT REQUIREMENTS 15-i This chapter outlines the requirements for the safe use of hoisting and rigging equipment on construction projects at DOE installations. 15.1 GENERAL ...............................................................................................................................15-1 15.2 PERSONNEL QUALIFICATIONS.........................................................................................15-2 15.2.1 Qualified Operators of Mobile Cranes.......................................................................15-2 15.2.2 Qualified Operators of Forklift Trucks ......................................................................15-3 15.2.3 Qualified Riggers .......................................................................................................15-4

71

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

3 3 LOAD HOOKS 13-i Chapter 13 Load Hooks This chapter provides safety standards for the inspection, testing, and maintenance of load hooks installed on cranes or hoists and implements the requirements of ASME B30.10, Chapter 10-1, "Hooks." See Chapter 12, "Rigging Accessories," for rigging hook requirements. 13.1 GENERAL ...............................................................................................................................13-1 13.1.1 Marking......................................................................................................................13-1 13.1.2 Attachments ...............................................................................................................13-1

72

La Belle: rigging in the days of the spritsail topmast, a reconstruction of a seventeenth-century ship's rig  

E-Print Network [OSTI]

LA BELLE: RIGGING IN THE DAYS OF THE SPRITSAIL TOPMAST, A RECONSTRUCTION OF A SEVENTEENTH-CENTURY SHIP’S RIG A Thesis by CATHARINE LEIGH INBODY CORDER Submitted to the Office of Graduate Studies of Texas A&M University... in partial fulfillment of the requirements for the degree of MASTER OF ARTS December 2007 Major Subject: Anthropology LA BELLE: RIGGING IN THE DAYS OF THE SPRITSAIL TOPMAST, A RECONSTRUCTION OF A SEVENTEENTH-CENTURY SHIP’S RIG A...

Corder, Catharine Leigh Inbody

2008-10-10T23:59:59.000Z

73

La Belle: Rigging in the days of the spritsail topmast, a reconstruction of a seventeenth-century ship's rig  

E-Print Network [OSTI]

La Belle’s rigging assemblage has provided a rare and valuable source of knowledge of 17th-century rigging in general and in particular, French and small-ship rigging characteristics. With over 400 individual items including nearly 160 wood and iron...

Corder, Catharine Leigh Inbody

2009-05-15T23:59:59.000Z

74

Parens Patriae Litigation to Redress Societal Damages from the BP Oil Spill: The Latest Stage in the Evolution of Crimtorts  

E-Print Network [OSTI]

semi-submersible oil drilling rig built by Hyundai HeavyHorizon Oil Spill and Offshore Drilling in its January 11,DEEPWATER HORIZON OIL SPILL AND OFFSHORE DRILLING, REPORT TO

Rustad, Michael L.; Koenig, Thomas H.

2011-01-01T23:59:59.000Z

75

Tracking Oil from the Deepwater Horizon Oil Spill in Barataria Bay Sediments  

E-Print Network [OSTI]

technically recoverable resources (UTRR) of oil and 50% of the UTRR of natural gas within the United States (Hagerty, 2010). On April 2001, British Petroleum (BP) acquired a contract with the Deepwater Horizon (DWH) mobile oil-drilling rig for oil and gas... technically recoverable resources (UTRR) of oil and 50% of the UTRR of natural gas within the United States (Hagerty, 2010). On April 2001, British Petroleum (BP) acquired a contract with the Deepwater Horizon (DWH) mobile oil-drilling rig for oil and gas...

Dincer, Zeynep

2013-05-03T23:59:59.000Z

76

Oil exploration and production in Scotland  

Science Journals Connector (OSTI)

...high return on investment, the additional...oil production platforms are in operation...FIG. 4. The semi-submersible exploration rig...API 38.5 4 platforms 154 wells 10000...return on their investment is very limited...

D. Hallett; G. P. Durant; G. E. Farrow

77

Ecologists brace for oil spill damage  

Science Journals Connector (OSTI)

... The pipeline from the Deepwater Horizon oil rig that exploded 80 kilometres ... that exploded 80 kilometres offshore on 20 April and sank two days later has been spewing out a plume of ...

Amanda Mascarelli

2010-05-03T23:59:59.000Z

78

Oil exploration and production in Scotland  

Science Journals Connector (OSTI)

...34 oil production platforms are in operation, and...onto a broad Palaeozoic platform. Further north a complex...FARROW FIG. 4. The semi-submersible exploration rig Bendoran...four steel production platforms, in a water depth of...

D. Hallett; G. P. Durant; G. E. Farrow

79

Oil exploration and production in Scotland  

Science Journals Connector (OSTI)

...production, 34 oil production platforms are in operation...FARROW FIG. 4. The semi-submersible exploration rig...EXPLORATION AND PRODUCTION 559 3 E Area shows...through four steel production platforms, in a water depth...

D. Hallett; G. P. Durant; G. E. Farrow

80

STEO September 2012 - oil production  

U.S. Energy Information Administration (EIA) Indexed Site

oil production forecast to rise almost 700,000 bpd this oil production forecast to rise almost 700,000 bpd this year, help cut U.S. petroleum imports U.S. crude oil production is expected to average 6.3 million barrels per day in 2012. That's up nearly 700,000 barrels per day from last year and the highest annual oil output since 1997 says the U.S. Energy Information Administration in its new monthly short-term energy outlook for September. EIA analyst Sam Gorgen explains: "Higher oil supplies, especially from North Dakota and Texas, boosted U.S. oil production. The number of on-shore drilling rigs targeting oil nationwide has increased by around 200 so far this year to just under 1,400 rigs." Higher domestic oil production will help cut U.S. petroleum imports. The share of total U.S.

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Open Rigging Through XML: Character Setup Utilizing Metadata and Node Based Editing  

E-Print Network [OSTI]

Manager. . . . . 22 7 The Rig Manager interface for an empty scene. . . . . . . . . . . . . . 23 8 The Rig Manager interface and “Rig Edit Mode” label on the viewport after clicking the “Create Rig” button. . . . . . . . . . . . . . . . . . . 24 9 The Rig... and replace them with code that performs the desired actions. For example, the node-based interface can be used to replace the task of authoring rig 6 definition files in a text editor so that the user never needs to learn the rig definition format. 7 3...

Kelly, Logan Scott

2014-02-19T23:59:59.000Z

82

EIA - Natural Gas Exploration & Reserves Data and Analysis  

Gasoline and Diesel Fuel Update (EIA)

natural gas, and lease condensate (annual). Crude Oil and Natural Gas Drilling Activity Rotary rigs in operation, footage drilled, and active well service rig counts (monthly,...

83

Surveillance Guide - CPS 8.1 Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

HOISTING AND RIGGING HOISTING AND RIGGING 1.0 Objective The objective of this surveillance is to examine hoisting and rigging operations to ensure that safe equipment and work practices are being used. The surveillance includes verification that hoisting and rigging work is performed in accordance with DOE requirements and best practices. 2.0 References 2.1 DOE O 440.1A, Worker Protection Management For Doe Federal And Contractor Employees 2.2 DOE-RL-92-36, Hanford Site Hoisting and Rigging Manual NOTE The DOE Hoisting and Rigging Manual should be used as the primary reference for this surveillance. 1 3.0 Requirements Implemented This surveillance is conducted to implement the RL Functions, Responsibilities, and Authorities Manual (FRAM) item No. 2504. 4.0 Surveillance Activities

84

MHK Technologies/Ocean Energy Rig | Open Energy Information  

Open Energy Info (EERE)

Rig Rig < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Ocean Energy Rig.jpg Technology Profile Primary Organization Free Flow 69 Technology Resource Click here Current Technology Type Click here Axial Flow Turbine Technology Readiness Level Click here TRL 4 Proof of Concept Technology Description The Ocean Energy Rig is a hybrid concept harnessing tidal stream with increased velocity from venturi system wave and wind power The rig also uses solar panels to power computers and warning lights Other unique features include a water ballasting system with automatic self levelling and wave ramps to maximize FreeFlow 69 s new wave power device It is envisaged that the Ocean Energy Rig would be assembled and maintained in dry docks and would be towed out into position before being semi submerged and anchored for operation Power output of the production model would be at least 10MW

85

Baltic oil: Moving offshore  

Science Journals Connector (OSTI)

... the consortium of Soviet, Polish and East German oil interests, will sink its first offshore bore-hole in the Baltic. This move follows four years of intensive prospecting, which ... findings. For a time, plans were afort to buy or hire a Vexco drilling rig, but when these had to be abondoned for lack of hard currency, the shut ...

Vera Rich

1980-06-19T23:59:59.000Z

86

Field Demonstraton of Existing Microhole Coiled Tubing Rig (MCTR) Technology  

SciTech Connect (OSTI)

The performance of an advanced Microhole Coiled Tubing Rig (MCTR) has been measured in the field during the drilling of 25 test wells in the Niobrara formation of Western Kansas and Eastern Colorado. The coiled tubing (CT) rig designed, built and operated by Advanced Drilling Technologies (ADT), was documented in its performance by GTI staff in the course of drilling wells ranging in depth from 500 to nearly 3,000 feet. Access to well sites in the Niobrara for documenting CT rig performance was provided by Rosewood Resources of Arlington, VA. The ADT CT rig was selected for field performance evaluation because it is one of the most advanced commercial CT rig designs that demonstrate a high degree of process integration and ease of set-up and operation. Employing an information collection protocol, data was collected from the ADT CT rig during 25 drilling events that encompassed a wide range of depths and drilling conditions in the Niobrara. Information collected included time-function data, selected parametric information indicating CT rig operational conditions, staffing levels, and field observations of the CT rig in each phase of operation, from rig up to rig down. The data obtained in this field evaluation indicates that the ADT CT rig exhibited excellent performance in the drilling and completion of more than 25 wells in the Niobrara under varied drilling depths and formation conditions. In the majority of the 25 project well drilling events, ROP values ranged between 300 and 620 feet per hour. For all but the lowest 2 wells, ROP values averaged approximately 400 feet per hour, representing an excellent drilling capability. Most wells of depths between 500 and 2,000 feet were drilled at a total functional rig time of less than 16 hours; for wells as deep at 2,500 to 3,000 feet, the total rig time for the CT unit is usually well under one day. About 40-55 percent of the functional rig time is divided evenly between drilling and casing/cementing. The balance of time is divided among the remaining four functions of rig up/rig down, logging, lay down bottomhole assembly, and pick up bottomhole assembly. Observations made during all phases of CT rig operation at each of the project well installations have verified a number of characteristics of the technology that represent advantages that can produce significant savings of 25-35 percent per well. Attributes of the CT rig performance include: (1) Excellent hole quality with hole deviation amounting to 1-2 degrees; (2) Reduced need for auxiliary equipment; (3) Efficient rig mobilization requiring only four trailers; (4) Capability of ''Zero Discharge'' operation; (5) Improved safety; and, (6) Measurement while drilling capability. In addition, commercial cost data indicates that the CT rig reduces drilling costs by 25 to 35% compared to conventional drilling technology. Widespread commercial use of the Microhole Coiled Tubing technology in the United States for onshore Lower-48 drilling has the potential of achieving substantially positive impacts in terms of savings to the industry and resource expansion. Successfully commercialized Microhole CT Rig Technology is projected to achieve cumulative savings in Lower-48 onshore drilling expenditures of approximately 6.8 billion dollars by 2025. The reduced cost of CT microhole drilling is projected to enable the development of gas resources that would not have been economic with conventional methods. Because of the reduced cost of drilling achieved with CT rig technology, it is estimated that an additional 22 Tcf of gas resource will become economic to develop. In the future, the Microhole Coiled Tubing Rig represents an important platform for the continued improvement of drilling that draws on a new generation of various technologies to achieve goals of improved drilling cost and reduced impact to the environment.

Kent Perry; Samih Batarseh; Sheriff Gowelly; Thomas Hayes

2006-05-09T23:59:59.000Z

87

Ixtoc 1 oil spill: flaking of surface mousse in the Gulf of Mexico  

Science Journals Connector (OSTI)

... 185 Alewife Brook Parkway, Cambridge, Massachusetts 02138, USA The blowout at the Ixtoc 1 offshore oil ... oil rig in the Gulf of Mexico (19°24? N, 92°12? W) produced ...

John S. Patton; Mark W. Rigler; Paul D. Boehm; David L. Fiest

1981-03-19T23:59:59.000Z

88

C:\Documents and Settings\jhr\My Documents\C_drive\RIGS\users 2013\rigs_usersApril2013.vp  

Gasoline and Diesel Fuel Update (EIA)

23 23 Reserves Information Gathering System (RIGS) User's Guide Version 2013 For Report Year 2012 Energy Information Administration U.S. Department of Energy April 2013 Form EIA-23 Reserves Information Gathering System (RIGS) User's Guide April 2013 EIA-23 Reserves Information Gathering System (RIGS) User's Guide Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Hardware / Software Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Installing the RIGS Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Installation Error Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Using the EIA-23 Reserves Information Gathering System (RIGS) System . . . . . . . . . . . . . . . . . 4 Initial Data Import from Last Year's RIGS Submission File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 The RIGS Main Menu Screen.

89

Development of a portable grain mass flow sensor test rig  

Science Journals Connector (OSTI)

A portable grain mass flow sensor test rig was built to measure the accuracy of a mass flow sensor with dual use in the field as well as in the lab. Concurrently, a synchronization method was developed that employs GPS timing data to synchronize the ... Keywords: Mass flow sensor, Test rig, Yield monitor accuracy, Yield monitor error

M. Loghavi; R. Ehsani; R. Reeder

2008-05-01T23:59:59.000Z

90

CRAD, Hoisting & Rigging Assessment Plan | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Hoisting & Rigging Assessment Plan Hoisting & Rigging Assessment Plan CRAD, Hoisting & Rigging Assessment Plan Performance Objective: To determine that hoisting and rigging operations are conducted according to "industry best standards" for increasing equipment reliability while assuring worker safety, and to verify issues being addressed in BN Hoisting assessment. Criteria: Lifts are identified and categorized appropriately for scheduled maintenance. DOE-STD-1090-2001 An integrated process ensures safety issues are identified and controls established. DOE-STD-1090-2001 Personnel operating and maintaining the hoisting equipment are trained; they understand their roles and responsibilities. DOE-STD-1090-2001 Maintenance conducts safety inspections of hoisting and rigging equipment on a scheduled basis, certifying that safe operations are in

91

Advanced Hot Section Materials and Coatings Test Rig  

SciTech Connect (OSTI)

Phase I of the Hyperbaric Advanced Hot Section Materials & Coating Test Rig Program has been successfully completed. Florida Turbine Technologies has designed and planned the implementation of a laboratory rig capable of simulating the hot gas path conditions of coal gas fired industrial gas turbine engines. Potential uses of this rig include investigations into environmental attack of turbine materials and coatings exposed to syngas, erosion, and thermal-mechanical fatigue. The principle activities during Phase 1 of this project included providing several conceptual designs for the test section, evaluating various syngas-fueled rig combustor concepts, comparing the various test section concepts and then selecting a configuration for detail design. Conceptual definition and requirements of auxiliary systems and facilities were also prepared. Implementation planning also progressed, with schedules prepared and future project milestones defined. The results of these tasks continue to show rig feasibility, both technically and economically.

Dan Davis

2006-09-30T23:59:59.000Z

92

Hoisting & Rigging ISMS Assessment Form  

Broader source: Energy.gov (indexed) [DOE]

Objective: Assess the institutional and department/division hoisting and Objective: Assess the institutional and department/division hoisting and rigging (including forklift, overhead cranes small hoists, and mobile cranes) requirements, policies, procedures, and work practices for both professional and incidental activities. Review the roles and responsibilities of line managers, support personnel and workers who are involved in these activities as well as the adequacy of compliance with institutional and/or Department/Division qualifications, training requirements, and inspection requirements. Assess the laboratory's process for understanding the causes and development of effective corrective actions for incidents/accidents. Review the roles and responsibilities of line managers, support personnel and workers who are involved in the

93

Hoisting & Rigging ISMS Assessment Form  

Broader source: Energy.gov (indexed) [DOE]

Objective: Assess the institutional and department/division hoisting and Objective: Assess the institutional and department/division hoisting and rigging (including forklift, overhead cranes small hoists, and mobile cranes) requirements, policies, procedures, and work practices for both professional and incidental activities. Review the roles and responsibilities of line managers, support personnel and workers who are involved in these activities as well as the adequacy of compliance with institutional and/or Department/Division qualifications, training requirements, and inspection requirements. Assess the laboratory's process for understanding the causes and development of effective corrective actions for incidents/accidents. Review the roles and responsibilities of line managers, support personnel and workers who are involved in the

94

DOE-STD-1090-2007; Hoisting and Rigging Standard (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

5 5 HOSTILE ENVIRONMENTS 5-i Chapter 5 Hostile Environments This chapter describes provisions for hoisting and rigging operations in hostile work environments. 5.1 GENERAL ................................................................................................................................5-1 5.2 HOSTILE ENVIRONMENT PLAN ......................................................................................5-2 5.2.1 Marking and Posting ....................................................................................................5-2 5.2.2 Inspection and Testing .................................................................................................5-2 EXHIBIT I Hostile Environment Plan ............................................................................................5-3

95

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

11-i Chapter 11 11-i Chapter 11 Wire Rope and Slings CHAPTER 11 WIRE ROPE AND SLINGS This chapter provides requirements for the fabrication and use of wire rope and slings used in hoisting and rigging. 11.1 GENERAL ...............................................................................................................................11-1 11.2 WIRE ROPE ............................................................................................................................11-4 11.2.1 Wire-Rope Lays.........................................................................................................11-4 11.2.2 Wire-Rope Cores .......................................................................................................11-4 11.2.3 Wire Rope for General Purposes

96

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

5 5 HOSTILE ENVIRONMENTS 5-i Chapter 5 Hostile Environments This chapter describes provisions for hoisting and rigging operations in hostile work environments. 5.1 GENERAL................................................................................................................................5-1 5.2 HOSTILE ENVIRONMENT PLAN ......................................................................................5-2 5.2.1 Marking and Posting ....................................................................................................5-2 5.2.2 Inspection and Testing .................................................................................................5-2 EXHIBIT I Hostile Environment Plan ............................................................................................5-3

97

Saving diesel fuel in the oil field  

SciTech Connect (OSTI)

Describes how diesel electric SCR (silicon controlled rectifier) drilling rigs are helping drillers save fuel expense in the oil fields, along with other energy conservation methods. Compares SCR to conventional drilling rigs. Points out that on conventional rigs, diesel engines drive rig components directly, while on the SCR electric rigs, diesel engines turn a.c. electric generators which supply energy to d.c. electric motors for rig component power. Components of the SCR rigs include drawworks, mud pumps, rotary table, compressors, shakers, blenders and the camp load. Recommends economic principles such as supplying generators large enough to handle the low p.f. (power factor) as well as peak power requirements; and keeping the work load on diesel engines as high as possible for fuel economy. Presents tables of fuel consumed per 100 kW at various load factors; effect of power factor on engine hp required; electric drilling rig power modules; and engine and generator selection guide. Emphasizes consideration of the competitive difference in diesel engine economy.

Elder, B.

1982-11-01T23:59:59.000Z

98

Arrowhead Center: Modeling Energy Market Volatility Report Title: Modeling Energy Market Volatility  

E-Print Network [OSTI]

in New Mexico 2 2 US Oil Rig Counts and WTI Spot Prices January 2000 to December 2009 7 3 US Natural Gas and Weighted Price Index 8 5 US Oil and Gas Extraction Employment and Rig Counts 8 6 Oil Rig Counts and WTI

Johnson, Eric E.

99

Hoisting & Rigging Assessment Form | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Hoisting & Rigging Assessment Form Hoisting & Rigging Assessment Form Hoisting & Rigging Assessment Form Assess the institutional and department/division hoisting and rigging (including forklift, overhead cranes small hoists, and mobile cranes) requirements, policies, procedures, and work practices for both professional and incidental activities. Review the roles and responsibilities of line managers, support personnel and workers who are involved in these activities as well as the adequacy of compliance with institutional and/or Department/Division qualifications, training requirements, and inspection requirements. Assess the laboratory's process for understanding the causes and development of effective corrective actions for incidents/accidents. Review the roles and responsibilities of line managers, support personnel and workers who are

100

HOISTING & RIGGING Assessment Plan--NNSA/Nevada Site Office Facility...  

Broader source: Energy.gov (indexed) [DOE]

on a scheduled basis, certifying that safe operations are in compliance with good conduct of operations. DOE-STD-1090-2001 HoistingRiggingPlan.doc More Documents &...

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Basic Rigging Workbook Training and Qualifications Program Office  

E-Print Network [OSTI]

. This instructor handbook incorporates the Subject Area's requirements, as well as information from the Department of Energy's (DOE's) Hoisting and Rigging Manual and ANSI B30.9. Definitions Asymmetrical load. An object

Ohta, Shigemi

102

Rotating head for rotary drilling rigs  

SciTech Connect (OSTI)

A rotating head is claimed for a rotary drilling rig which is to be secured to the top of a well pipe having an inner rotating portion with an opening therethrough which permits passage of drill pipe, pipe joints, and Kelly tools; the rotating portion has an annular drive rubber formed integrally with the top portion thereof. A rotating head drive bushing having an opening with a cross-sectional shape generally conforming to the cross-section of the Kelly tool to permit only sliding motion therebetween is provided with helical external ridges which produce a disengagable gripping action with the opening in the drive rubber at the top of the rotating portion of the rotating head. The rotating portion has a conventional stripper rubber at the bottom thereof and is mounted with a double roller bearing to provide low friction motion with respect to the fixed portion of the head. The double roller bearing is lubricated with a viscous lubricating material and paddles are provided between the sets of rollers of the double roller bearing for distributing the viscous lubricating material and in particular propel it onto the upper set of bearings; the upper body portion of the rotating head is readily detachable from the lower sleeve portion which is normally welded to the well conductor pipe.

Adams, J.R.

1983-09-27T23:59:59.000Z

103

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

APPENDIX A PROCUREMENT GUIDELINES A-1 Appendix A Procurement Guidelines This appendix provides reference guidance in preparing purchase requisitions for hoisting and rigging materials and equipment. Nationally recognized standards and specifications are referenced for listed items. However, caution should be used prior to procurement of special items in order to verify appropriate specification or standard reference and requirements. Some specific requirements listed in this appendix are more restrictive than consensus standard requirements, but are recommended to ensure materials of adequate quality and workmanship are provided. Quality receipt inspections should be provided for all received materials in order to verify compliance of all

104

DOE-STD-1090-2007; Hoisting and Rigging Standard (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

APPENDIX A APPENDIX A PROCUREMENT GUIDELINES A-i Appendix A Procurement Guidelines This appendix provides reference guidance in preparing purchase requisitions for hoisting and rigging materials and equipment. Nationally recognized standards and specifications are referenced for listed items. However, caution should be used prior to procurement of special items in order to verify appropriate specification or standard reference and requirements. Some specific requirements listed in this appendix are more restrictive than consensus standard requirements, but are recommended to ensure materials of adequate quality and workmanship are provided. Quality receipt inspections should be provided for all received materials in order to verify compliance of all

105

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

TERMINOLOGY AND DEFINITIONS 1-1 Chapter 1 Terminology and Definitions The following are specialized terms commonly used when discussing hoisting and rigging operations. Many may not be used in this standard, but are included for general information. The terms are arranged in alphabetical order. Illustrations are included for clarity. ABRASION: Surface wear. ACCELERATION STRESS: Additional stress imposed due to increasing load velocity. ALTERNATE LAY: Lay of wire rope in which the strands are alternately regular and lang lay. ANSI: American National Standards Institute. APPOINTED: Assigned specific responsibilities by the employer or the employer's representative. AREA, METALLIC: Sum of the cross- sectional areas of individual wires in a wire rope

106

DOE-STD-1090-2007; Hoisting and Rigging Standard (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

TERMINOLOGY AND DEFINITIONS 1-1 Chapter 1 Terminology and Definitions The following are specialized terms commonly used when discussing hoisting and rigging operations. Many may not be used in this standard, but are included for general information. The terms are arranged in alphabetical order. Illustrations are included for clarity. ABRASION: Surface wear. ACCELERATION STRESS: Additional stress imposed due to increasing load velocity. ALTERNATE LAY: Lay of wire rope in which the strands are alternately regular and lang lay. ANSI: American National Standards Institute. APPOINTED: Assigned specific responsibilities by the employer or the employer's representative. AREA, METALLIC: Sum of the cross- sectional areas of individual wires in a wire rope

107

Counting Bacteria  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Counting Bacteria Counting Bacteria Name: Tammy Location: N/A Country: N/A Date: N/A Question: I am working with my daughter on her Science Fair Project. We are testing daily items that we come in contact with to see how many germs and bacteria it has. How can we differentiate between the types of bacteria? How can we decide which one has the most? We are using the growth medium Agar in petri dishes. Where can I find more scientific info as to why this happens so we can write up the project? Replies: These are complex questions. First, the agar medium is used as a solid phase so that one can see colonies formed. These are round mounds of growth because bacteria multiply in all directions, but they cannot normally move in or on a solid phase so they remain at the site of multiplication. Every bacterial cell can multiply into a colony. Thus, the number of colonies is a measure for the number of cells present, if you have taken quantitative samples. If you want to quantitate, you should try to standardize your samples (for example, use 1 ml liquid to wash surfaces, food particles, 1 ml of liquids, etc. and add of this one drop (with a micropipette would be more accurate) per agar plate and let the drop form a tear on the plate. The number of colonies that grow in this tear are a measure for the original number of bacteria present in the drop, because each colony is derived from a single bacterial cell.

108

The Feasibility of Natural Gas as a Fuel Source for Modern Land-Based Drilling Rigs  

E-Print Network [OSTI]

rigs are still in use today, most modern drilling rigs are electrically powered. Electric drilling rig engines are coupled to electric generators, in what is called a generator set, or genset, which creates electricity that powers electric motors... drilling rigs can be categorized into either direct current (DC) or alternating current (AC), depending on the type of electricity the rig generators produce. Electric motors power the draw-works, top drive, mud pumps, and other systems with electricity...

Nunn, Andrew Howard

2012-02-14T23:59:59.000Z

109

Human rigHts advocacy in action  

E-Print Network [OSTI]

in memoriam 26 2 nonesuch//Autumn 2011 Greencoat 80 Silk is carbon balanced ­ where the carbon intensity has purchased. Carbon balancing by the World Land Trust tackles climate change through projects that both offset 18 Brave new world 22 thought that counts 27 In pictures snapshots 5 taken 29 Regulars Bristol

Bristol, University of

110

Local Frequency Based Estimators for Anomaly Detection in Oil and Gas Applications  

E-Print Network [OSTI]

Local Frequency Based Estimators for Anomaly Detection in Oil and Gas Applications Alexander Singh industrial applications such as the smart grid and oil and gas are continuously monitored. The massive to positively impact the bottom line. In the oil and gas industry, modern oil rigs are outfitted with thousands

Slatton, Clint

111

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

4 4 BELOW-THE-HOOK LIFTING DEVICES 14-i Chapter 14 Below-the-Hook Lifting Devices This chapter provides the requirements for below-the-hook lifting devices used in hoisting and rigging, such as spreader bars, lifting yokes, and lift fixtures. This section implements the requirements of ASME B30.20, "Below-the-Hook Lifting Devices." NOTE: Special lifting devices for shipping containers weighing 10,000 lb or more that are used for radioactive materials may be governed by ANSI N14.6 ["Standard for Special Lifting Devices for Shipping Containers Weighing 10,000 Pounds (4,500 kg) or More for Nuclear Materials."] 14.1 GENERAL ...............................................................................................................................14-1

112

Workover well control. Part 3. Conventional rigs, snubbing units handle a variety of workover jobs  

SciTech Connect (OSTI)

The conventional rig, the most widely used rig for workovers, performs several common functions: tripping in and out of the hole, rotating the work string, and circulating fluid. Its primary component groups are the derrick, hoisting systems, rotary tools, circulating systems, and tubular goods. Rig sizing depends on the job requirements; the typical workover rig is a small-capacity, single unit used for concentric work. A workover rig's most important feature is its portability; compartmentalizing the rig permits transporting it offshore in packages smaller than 8000 lb and allows small cranes to replace derrick barges for loading operations.

Adams, N.

1981-08-31T23:59:59.000Z

113

Professional development of new rig supervisors a must  

SciTech Connect (OSTI)

This paper reports that because the number of drilling personnel has dropped dramatically over the last decade, many operators now face a shortage of competent rig supervisors. To be effective, the rig supervisor must develop a knowledge of drilling operations, apply optimization techniques to improve drilling performance, demand safe work practices, and protect the environment. Petroleum engineering degree programs and industry training programs can teach the rig supervisor specific technical and management skills; however, traditionally, the supervisor trainee shadows an experienced company man to learn how to direct a drilling operation. The success of this method depends not only on the skills and learning capabilities of the trainee but also on the trainer's time, motivation, knowledge, and ability to teach the skills necessary to direct drilling activities.

Nordt, D.P. (Marathon Oil Co., Houston, TX (United States)); Stone, M.S. (Marathon Oil Co., Bridgeport, IL (United States))

1992-10-26T23:59:59.000Z

114

Natural Gas for the Long Haul (Big Rigs Go Green)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the Long Haul (Big Rigs Go Green) the Long Haul (Big Rigs Go Green) JOHN DAVIS: No one has been hit harder by rising fuel prices than America's long-haul commercial truckers. A big rig can easily burn 20,000 gallons of fuel a year, and with diesel prices projected to keep rising, this not only pinches the trucker's bottom line, but that extra cost is passed on to American consumers. Meanwhile, natural gas prices have remained stable and are forecast to stay that way for years to come. Up to now, demand for natural gas as a transportation fuel has been mostly for compressed natural gas used by light and medium-duty vehicles. City buses, refuse haulers, utilities, and

115

This Week In Petroleum Summary Printer-Friendly Version  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Rig Count Passes 1,000 On June 24, 2011, the Baker Hughes weekly count of rigs actively drilling for oil in the United States was 1,003, marking the first week since the company...

116

January 3, 2011 18:46 GulfOilSpill010310 International Journal of Bifurcation and Chaos  

E-Print Network [OSTI]

Scientific Publishing Company Measurable Dynamics Analysis of Transport in the Gulf of Mexico During the Oil-shore oil rig in the Gulf of Mexico, started the worst human-caused submarine oil spill ever. Though publicly and widely underscored by the oil spill disaster in the Gulf of Mexico during the spring

Bollt, Erik

117

Hoisting and Rigging: Lift Planning and Control for Ordinary Lifts  

E-Print Network [OSTI]

operator Follow specific instructions/procedures for attachment of the rigging gear to the load. Use. Repeat as necessary until the load is evenly balanced. Follow "Conduct of Operator" requirements2 Stop at the work site and follow the plan Assign a designated leader Ensure all personnel involved in the lift

Wechsler, Risa H.

118

Mixed Stream Test Rig Winter FY-2011 Report  

SciTech Connect (OSTI)

This report describes the data and analysis of the initial testing campaign of the Mixed Stream Test Rig (MISTER) at Idaho National Laboratory (INL). It describes the test specimen selection, physical configuration of the test equipment, operations methodology, and data and analysis of specimens exposed in two environments designed to represent those expected for high temperature steam electrolysis (HTSE).

Chalres Park; Tedd Lister; Kevin DeWall

2011-04-01T23:59:59.000Z

119

This Week In Petroleum Printer-Friendly Version  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

7, 2010 (Next Release on March 24, 2010) Oil Rig Counts Increase Baker Hughes reported that the number of rigs drilling for oil in the United States has recovered since the low...

120

[Outlook for 1997 in the oil and gas industries of the US  

SciTech Connect (OSTI)

This section contains 7 small articles that deal with the outlook for the following areas: US rotary rigs (Moving back up, finally); US production (Crude decline continues, gas rising); producing oil wells (Oil stays steady); producing gas wells (Well numbers up again); drilling and producing depths (New measured depths records); and US reserves (Gas reserves jump; oil dips slightly).

NONE

1997-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Oil spills underreported in Gulf of Mexico  

Science Journals Connector (OSTI)

... There is only one official source of data on pollution caused by offshore drilling in US waters: the National Response Center, an online reporting system for oil ... analyzed by Amos, an average of 14 gallons per day had been spilling from that rig for several months, says Amos. "But our image analysis shows the leak rate ...

Melissa Gaskill

2011-04-21T23:59:59.000Z

122

Department of Energy Supercomputer Helps Design More Efficient Big Rigs |  

Broader source: Energy.gov (indexed) [DOE]

Department of Energy Supercomputer Helps Design More Efficient Big Department of Energy Supercomputer Helps Design More Efficient Big Rigs Department of Energy Supercomputer Helps Design More Efficient Big Rigs February 8, 2011 - 12:00am Addthis Washington, DC - BMI Corporation, a company in South Carolina, in partnership with the Department of Energy's Oak Ridge National Laboratory (ORNL) has successfully developed a technology that will make semi trucks more fuel efficient with the potential to save millions of gallons of fuel. Utilizing the nation's most powerful computer, BMI Corp designed a SmartTruck UnderTray System, a set of integrated aerodynamic fairings that improve the aerodynamics of 18-wheeler (Class 8) long-haul trucks. If all 1.3 million Class 8 trucks in the U.S. were configured with these components, companies could achieve annual savings of 1.5 billion gallons

123

Chapter 2 - Offshore Oil and Gas Drilling Engineering and Equipment  

Science Journals Connector (OSTI)

Abstract This chapter introduces the drilling engineering and equipment in the field of offshore oil and gas.It starts by introducing the drilling platform used in the offshore oil and gas. Then it presents the wellhead and wellhead devices used in the offshore oil and gas. After these two, it begins to introduce the drilling engineer including preparation, working procedure, well completion and so on. Finally, it roughly introduces the new technology in drilling and new drilling rig nowadays.

Huacan Fang; Menglan Duan

2014-01-01T23:59:59.000Z

124

An accounting manual for oil well servicing contractors  

E-Print Network [OSTI]

, and bailing of' oil wells, These Jobs had previously been done by the oil companies them- selves, with a standard service rig set up over the well at the time of its completion. The more complicated. Jobs of deepening and work requiring rotary tools were..., with complete set of Rig 0 Lite vapox' proof wix ing, and three Hutoh- inson vapor pxoof floodlights, x One 1V" Emsco Gilbath rotary. Emsco NB?SO, enclosed, 4 sheave travel- ing block B Z. Tx'iplex hooki 60 ?on, 60 C Oilwell swivel, Two centrifugal water...

Robert, Curtis Dean

1949-01-01T23:59:59.000Z

125

CPS 8.1 Hoisting and Rigging, 2/25/2000  

Broader source: Energy.gov [DOE]

The objective of this surveillance is to examine hoisting and rigging operations to ensure that safe equipment and work practices are being used.  The surveillance includes verification that...

126

HOISTING & RIGGING Assessment Plan--NNSA/Nevada Site Office Facility Representative Division  

Broader source: Energy.gov [DOE]

:  To determine that hoisting and rigging operations areconducted according to “industry best standards” for increasing equipment reliabilitywhile assuring worker safety, and to verify issues being...

127

Technical and economic evaluation of selected compact drill rigs for drilling 10,000 foot geothermal production wells  

SciTech Connect (OSTI)

This report summarizes the investigation and evaluation of several {open_quotes}compact{close_quotes} drill rigs which could be used for drilling geothermal production wells. Use of these smaller rigs would save money by reducing mobilization costs, fuel consumption, crew sizes, and environmental impact. Advantages and disadvantages of currently-manufactured rigs are identified, and desirable characteristics for the {open_quotes}ideal{close_quotes} compact rig are defined. The report includes a detailed cost estimate of a specific rig, and an evaluation of the cost/benefit ratio of using this rig. Industry contacts for further information are given.

Huttrer, G.W. [Geothermal Management Company, Inc., Frisco, CO (United States)

1997-11-01T23:59:59.000Z

128

Structural Basis of Viral RNA Recognition by RIG-I-Like Receptors  

E-Print Network [OSTI]

binding surface also abolished RIG-I signaling in cells. In order to compare the RIG-I/RNA interactions with other RLRs, we also determined the dsRNA binding surface of MDA5 CTD by NMR titration studies. MDA5 CTD has a similar binding surface...

Lu, Cheng

2012-10-19T23:59:59.000Z

129

Numerical and experimental determination of neutron characteristics in irradiation rigs operated in LVR-15 research reactor  

Science Journals Connector (OSTI)

......standard single-cell CHOUCA rigs or...dedicated multi-cell rigs. The temperature...reflector and in fuel will be provided...dedicated to material degradation evaluation. IRRADIATION...evaluation of material degradation induced by radiation...averaged over cell) has to be modified...reflects actual fuel burnup distribution......

Michal Koleska; Ladislav Viererbl; Zdena Lahodova; Jaroslav Ernest; Jelena Zmitkova; Milan Marek

2014-10-01T23:59:59.000Z

130

Safety First Safety Last Safety Always Inspect rigging equipment for material handling before use  

E-Print Network [OSTI]

Safety First Safety Last Safety Always Inspect rigging equipment for material handling before use. Rigging Equipment for Material Handling Safety Tip #19 At your job or at the plate, you can't get home on the reverse side of this safety tip sheet. Please refrain from reading the information verbatim

Minnesota, University of

131

U.S. Energy Information Administration (EIA)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

26, unchanged from the previous week. The oil rig count increased by 6 units to 1,401 rotary rigs. The weekly average natural gas plant liquids composite price (covering July...

132

EIA Energy Information Administration  

U.S. Energy Information Administration (EIA) Indexed Site

for higher consumer prices in the upcoming winter. Other Market Trends: The Baker Hughes Rotary Rig Count of the number of drilling rigs actively exploring for or developing oil...

133

The design of a test rig for the identification of dynamic coefficients of a high temperature magnetic bearing  

E-Print Network [OSTI]

This thesis is a report on the research and Micrographics. development to design a test rig for the identification of the dynamic coefficients of a radial magnetic bearing. The test rig development is intended for dynamic coefficient observation...

Rahtika, I Putu Gede Sopan

1998-01-01T23:59:59.000Z

134

New ultra-deepwater rig with dual rotaries will reduce costs  

SciTech Connect (OSTI)

The Discoverer Enterprise, a next generation, ultra-deepwater drill ship with a dual rotary system, will decrease drilling and completion costs by reducing bottom hole assembly (BHA) and tubular preparation time. Transocean Offshore received a contract from Amoco Corp. to build the ultra-deep floating rig and is scheduled to spud its first well in July 1998. It will generally work in water deeper than 6,000 ft. The rig design involves a new approach that addresses the overall well-construction process and equipment required to decrease significantly deepwater drilling time. The Discoverer is the first ultra-deepwater rig designed specifically for handling subsea completions and extended well tests. The paper discusses increased deepwater rig demand, rig construction costs, drillship design, well construction, development drilling, and cost justification.

Cole, J.C.; Herrmann, R.P.; Scott, R.J. [Transocean Offshore Inc., Houston, TX (United States); Shaughnessy, J.M. [Amoco Corp., Houston, TX (United States)

1997-05-26T23:59:59.000Z

135

Job Counting Guidelines  

Broader source: Energy.gov (indexed) [DOE]

Environmental Management Environmental Management Definitions and Guidelines for Counting Monthly and Quarterly EM Recovery Act Full Time Equivalents (FTEs) and Cumulative Head-Count The following updated definitions and guidelines are intended to provide EM Recovery Act sites with information to collect and report timely and accurate full-time equivalent and cumulative head-count data for both monthly and quarterly jobs data calls. These revised guidelines supersede the previous monthly jobs data reporting definitions and guidelines dated February 9, 2010. These revised guidelines remain consistent with OMB guidance issued December 18, 2009 and cover subcontractors and vendors as well as prime

136

Crude oil prices: Are our oil markets too tight?  

SciTech Connect (OSTI)

The answer to the question posed in the title is that tightness in the market will surely prevail through 1997. And as discussed herein, with worldwide demand expected to continue to grow, there will be a strong call on extra oil supply. Meeting those demands, however, will not be straightforward--as many observers wrongly believe--considering the industry`s practice of maintaining crude stocks at ``Just in time`` inventory levels. Further, impact will be felt from the growing rig shortage, particularly for deepwater units, and down-stream capacity limits. While these factors indicate 1997 should be another good year for the service industry, it is difficult to get any kind of consensus view from the oil price market. With most observers` information dominated by the rarely optimistic futures price of crude, as reflected by the NYMEX, the important fact is that oil prices have remained stable for three years and increased steadily through 1996.

Simmons, M.R. [Simmons and Co. International, Houston, TX (United States)

1997-02-01T23:59:59.000Z

137

DOE's Portal to Deepwater Horizon Oil Spill Data  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

On April 20, 2010, the Deepwater Horizon platform in the Gulf of Mexico exploded. The explosion and fire killed and injured workers on the oil rig, and caused major releases of oil and gas into the Gulf for several months. The Department of Energy, in keeping with the Obama Administrations ongoing commitment to transparency, provided online access to data and information related to the response to the BP oil spill. Included are schematics, pressure tests, diagnostic results, video clips, and other data. There are also links to the Restore the Gulf website, to the trajectory forecasts from NOAA, and oil spill information from the Environmental Protection Agency.

138

HOISTING & RIGGING Assessment Plan--NNSA/Nevada Site Office Facility  

Broader source: Energy.gov (indexed) [DOE]

HOISTING & RIGGING Assessment Plan--NNSA/Nevada Site Office HOISTING & RIGGING Assessment Plan--NNSA/Nevada Site Office Facility Representative Division HOISTING & RIGGING Assessment Plan--NNSA/Nevada Site Office Facility Representative Division : To determine that hoisting and rigging operations are conducted according to "industry best standards" for increasing equipment reliability while assuring worker safety, and to verify issues being addressed in BN Hoisting assessment. Criteria: Lifts are identified and categorized appropriately for scheduled maintenance. DOE-STD-1090-2001 An integrated process ensures safety issues are identified and controls established. DOE-STD-1090-2001 Personnel operating and maintaining the hoisting equipment are trained; they understand their roles and responsibilities. DOE-STD-1090-2001

139

E-Print Network 3.0 - advanced seal rig Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 3 4 5 > >> Page: << < 1 2 3 4 5 > >> 41 Heat Transfer Research, 2010, Vol. 41, No. 6 Turbine Aero-Heat Transfer Studies Summary: , rotating turbine research rigs, realistic gas...

140

Analytical and experimental investigations of a labyrinth seal test rig and damper seals for turbomachinery  

E-Print Network [OSTI]

. The test rig is also used during the development of a unique damper seal device. The experimental data used to determine the direct damping coefficient of the damper seal device are presented. Results of vibration and pressure measurements that demonstrate...

Shultz, Richard Raymond

1997-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

U.S. Crude Oil and Natural Gas Active Well Service Rigs in operation  

Gasoline and Diesel Fuel Update (EIA)

Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1973 1,549 1,677 1,805 1,898 1,991 1,994 1,997 2,112 2,227 2,247 2,266 2,334 1974 2,401 2,436 2,470 2,513 2,555 2,525 2,494 2,483 2,473 2,488 2,503 2,543 1975 2,582 2,549 2,568 2,549 2,374 2,426 2,344 2,369 2,459 2,434 2,505 2,675 1976 2,612 2,490 2,521 2,597 2,575 2,607 2,606 2,656 2,652 2,639 2,601 2,660 1977 2,474 2,628 2,695 2,804 2,760 2,895 2,929 2,942 2,964 2,973 2,968 2,898 1978 2,810 2,906 2,899 2,997 2,996 2,987 3,006 3,089 3,073 3,078 2,958 3,063 1979 3,094 2,698 2,765 3,034 3,369 3,506 3,572 3,621 3,673 3,954 3,795 3,709 1980 3,855 3,923 4,010 3,871 4,032 4,112 4,092 4,155 4,277 4,290 4,281 4,172

142

U.S. Crude Oil Rotary Rigs in Operation (Number of Elements)  

Gasoline and Diesel Fuel Update (EIA)

Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1973 NA NA NA NA NA NA NA NA NA NA NA NA 1974 NA NA NA NA NA NA NA NA NA NA NA NA 1975 NA NA NA NA NA NA NA NA NA NA NA NA 1976...

143

U.S. Onshore Crude Oil and Natural Gas Rotary Rigs in Operation...  

Gasoline and Diesel Fuel Update (EIA)

Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1973 1,120 1,037 959 914 974 1,042 1,075 1,140 1,183 1,250 1,304 1,318 1974 1,283 1,264 1,272 1,280 1,319 1,342 1,387 1,426...

144

U.S. Crude Oil Rotary Rigs in Operation (Number of Elements)  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1970's NA NA NA NA NA NA NA 1980's NA NA NA NA NA NA NA NA 554 453 1990's 532 482 373 373 335 323 306...

145

U.S. Crude Oil and Natural Gas Rotary Rigs in Operation (Number...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1973 1,219 1,126 1,049 993 1,046 1,118 1,156 1,222 1,266 1,334 1,390 1,405 1974 1,372 1,355 1,367 1,381 1,413 1,432 1,480 1,518...

146

U.S. Offshore Crude Oil and Natural Gas Rotary Rigs in Operation...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1973 99 89 90 79 72 76 81 82 83 84 86 87 1974 89 91 95 101 94 90 93 92 90 91 99 103 1975 94 93 102 102 102 106 109 112 113 112...

147

U.S. Crude Oil and Natural Gas Rotary Rigs in Operation (Number...  

Gasoline and Diesel Fuel Update (EIA)

Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1940's 2,017 1950's 2,154 2,543 2,641 2,613 2,508 2,686 2,620 2,426 1,922 2,071 1960's 1,748 1,761...

148

U.S. Onshore Crude Oil and Natural Gas Rotary Rigs in Operation...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1940's NA 1950's NA NA NA NA NA NA NA NA NA NA 1960's NA NA NA NA NA NA NA NA NA NA 1970's NA NA NA...

149

U.S. Offshore Crude Oil and Natural Gas Rotary Rigs in Operation...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1940's NA 1950's NA NA NA NA NA NA NA NA NA NA 1960's NA NA NA NA NA NA NA NA NA NA 1970's NA NA NA 84...

150

Natural Gas - U.S. Energy Information Administration (EIA) - U.S. Energy  

Gasoline and Diesel Fuel Update (EIA)

23, 2012 | Release Date: May 24, 23, 2012 | Release Date: May 24, 2012 | Next Release: May 31, 2012 Previous Issues Week: 01/19/2014 (View Archive) JUMP TO: In The News | Overview | Prices/Demand/Supply | Storage In the News: Natural Gas Rig Count Briefly Drops Below 600. The natural gas rotary rig count, as reported by Baker Hughes Incorporated, rose by 2 this week to 600, after falling to a 10-year low of 598 last week. After increasing modestly to 936 active rigs in the fall of 2011, the natural gas rig count has dropped sharply. The oil rig count, currently at 1,382, has generally risen steadily since 2009, largely in response to increasing crude oil prices. Natural gas rigs are currently down about 31 percent from their level at the same time last year, while oil rigs have risen by 45 percent over the

151

Kuwait pressing toward preinvasion oil production capacity  

SciTech Connect (OSTI)

Oil field reconstruction is shifting focus in Kuwait as the country races toward prewar production capacity of 2 million b/d. Oil flow last month reached 1.7 million b/d, thanks largely to a massive workover program that has accomplished about as much as it can. By midyear, most of the 19 rigs in Kuwait will be drilling rather than working over wells vandalized by retreating Iraqi troops in February 1991. Seventeen gathering centers are at work, with capacities totaling 2.4 million b/d, according to state-owned Kuwait Oil Co. (KOC). This article describes current work, the production infrastructure, facilities strategy, oil recovery, well repairs, a horizontal pilot project, the drilling program, the constant reminders of war, and heightened tensions.

Tippee, B.

1993-03-15T23:59:59.000Z

152

Efficiency of a gearbox lubricated with wind turbine gear oils  

Science Journals Connector (OSTI)

Abstract In this study a two stage multiplying gearbox with helical gears and four fully formulated wind turbine gear oils were tested, on a back-to-back gearbox test rig with recirculating power, at low input speeds (100–500 rpm) and high input torques (500–1000 Nm). The gearbox oil sump temperature was set free. A numeric power loss model simulating all the relevant power loss mechanisms was implemented, aiming to evaluate the relative influence of each power loss component. The experimental results have shown that each wind turbine gear oil formulation generated different power loss resulting in distinct stabilized operating temperatures.

Pedro M.T. Marques; Carlos M.C.G. Fernandes; Ramiro C. Martins; Jorge H.O. Seabra

2014-01-01T23:59:59.000Z

153

Diverter/bop system and method for a bottom supported offshore drilling rig  

SciTech Connect (OSTI)

This patent describes a system adapted for alternative use as a diverter or a blowout preventer for a bottom supported drilling rig and adapted for positioning beneath a rotary table of the drilling rig, the system comprising: a fluid flow controller having a controller housing with a lower opening and an upper opening and a vertical flow path therebetween and an outlet passage provided in its housing wall, and at least two bases. A method is described for installing a system adapted for alternative connection as a diverter or a blowout preventer for a bottom supported drilling rig positioned beneath a rotary table of the drilling rig after structural casing has been set in a borehole. The method comprises: positioning a first telescoping spool having a lower end and an upper end below the rotary table, the first spool having a first base disposed at its upper end, the first base having a port disposed in its wall; aligning a fluid flow controller having a controller housing wall outlet passage and adapted for alternative use as a diverter or a blowout preventer so that the controller is substantially vertically aligned between a bore of the rotary table above and the structural casing below; and securing the fluid flow controller beneath the drilling rig rotary table.

Roche, J.R.; Alexander, G.G.

1987-03-03T23:59:59.000Z

154

Rapid deployment of oil-drilling tools utilizing distribution network and inventory strategies  

E-Print Network [OSTI]

DTS is an oil and gas services company that delivers drilling tools to six major customer districts in the continental U.S. After the tools are used at a rig, they are transported to the closest repair and maintenance (MTC) ...

Rahim, Ryan

2010-01-01T23:59:59.000Z

155

Mode localization results and laboratory demonstration techniques with a multi-pendulum rig  

E-Print Network [OSTI]

. Perturbed system mode shapes, analytical, for R' = 0. 015. 16 Table III. Perturbed system mode shapes, analytical, for R' = 0. 04 (K, = 0. 908 N-m/rad, 1, = 0, 532 m). 17 Table IV. Perturbed system mode shapes, analytical, for R' = 0. 15 (K, = 3. 90 N.... Pendulum rig schematic Figure 2. Detail of pendulum rig. Figure 3. Graphical depiction of mode shapes given in Table I. 10 Figure 4. Depiction of perturbed mode shapes given in Table's II, III, and IV for: (a) Rs=0. 015; (b) R =0. 04; and (c) R =0. 15...

Bollich, Robert Kenneth Gerard

1992-01-01T23:59:59.000Z

156

OIL SHALE  

E-Print Network [OSTI]

Seyitömer, Himmeto?lu and Hat?lda? oil shale deposits. The results demonstrate that these oil shales are

Fields (in-situ Combustion Approach; M. V. Kök; G. Guner; S. Bagci?

157

Rigging a horse and rider: simulating the predictable and repetitive movement of the rider  

E-Print Network [OSTI]

setup. If an animation piece is only going to have a few shots with a horse and rider, then the trouble of setting up an automated character rig is not practical, but if there are a significant amount of shots with a horse and rider galloping across...

Kuhnel, Jennifer Lynn

2004-09-30T23:59:59.000Z

158

AbstractThe red snapper (Lutjanus campechanus) is currently under rig  

E-Print Network [OSTI]

653 Abstract­The red snapper (Lutjanus campechanus) is currently under rig orous federal and state of annuli in otolith thin sections have been used to age many species of fish, including red snapper. However, the utility of this method for aging red snapper has been questioned by those who dispute both

159

Department of Mechanical Engineering Fall 2009 Air Products-Entrained Particle Flow Test Rig  

E-Print Network [OSTI]

PENNSTATE Department of Mechanical Engineering Fall 2009 Air Products-Entrained Particle Flow Test are causing catalyst plugging. Objectives Air Products requested that a test rig be constructed to entrain the hydrogen reforming facilities and aid Air Products in understanding the plugging problem. Approach

Demirel, Melik C.

160

A Built for Purpose Micro-Hole Coiled Tubing Rig (MCTR)  

SciTech Connect (OSTI)

This report will serve as the final report on the work performed from the contract period October 2005 thru April 2007. The project 'A Built for Purpose Microhole Coiled Tubing Rig (MCTR)' purpose was to upgrade an existing state-of-the-art Coiled Tubing Drilling Rig to a Microhole Coiled Tubing Rig (MCTR) capable of meeting the specifications and tasks of the Department of Energy. The individual tasks outlined to meet the Department of Energy's specifications are: (1) Concept and development of lubricator and tool deployment system; (2) Concept and development of process control and data acquisition; (3) Concept and development of safety and efficiency improvements; and (4) Final unit integration and testing. The end result of the MCTR upgrade has produced a unit capable of meeting the following requirements: (1) Capable of handling 1-inch through 2-3/8-inch coiled tubing (Currently dressed for 2-3/8-inch coiled tubing and capable of running up to 3-1/2-inch coiled tubing); (2) Capable of drilling and casing surface, intermediate, production and liner hole intervals; (3) Capable of drilling with coiled tubing and has all controls and installation piping for a top drive; (4) Rig is capable of running 7-5/8-inch range 2 casing; and (5) Capable of drilling 5,000 ft true vertical depth (TVD) and 6,000 ft true measured depth (TMD).

Bart Patton

2007-09-30T23:59:59.000Z

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

„Peak Oil  

Science Journals Connector (OSTI)

Wissenschaftliche Voraussagen deuten auf „Peak Oil“, das Maximum globaler Erdölförderung, in unserer ... der demokratischen Systeme führen. Psychoanalytische Betrachtung darf „Peak Oil“ für die Zivilisation als e...

Dr. Manuel Haus; Dr. med. Christoph Biermann

2013-03-01T23:59:59.000Z

162

Rigging skeletal perissodactyl and artiodactyl ungulate limbs using analytic inverse kinematic-based solutions for a feature film production environment  

E-Print Network [OSTI]

The goal of this thesis is to develop and construct a repeatable, scalable, and portable rigging solution for the skeletal limbs of ungulates, maximizing functionality while streamlining intuitive interface controls for a feature film production...

Telford, William Lawrence, Jr

2007-04-25T23:59:59.000Z

163

A test rig for the identification of rotordynamic coefficients of fluid film bearings  

E-Print Network [OSTI]

. The test bearing articles were considered for cryogenic applications where the actual lubrication medium is liquid hydrogen or liquid oxygen. The parameter identification method used an advanced pseudo-random forcing excitation and a technique based...A TEST RIG FOR THE IDENTIFICATION OF ROTORDYNAMIC COEFFICIENTS OF FLUID FILM BEARINGS A Thesis LEWIS MILLER ROBISON III Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements...

Robison, Lewis Miller

1995-01-01T23:59:59.000Z

164

Large scale test rig for flow visualization and leakage measurement of labyrinth seals  

E-Print Network [OSTI]

number. Heffner (1959) measured the leakage rates of air through stationary true size labyrinth seals with the goal of predicting leakage rates for new seal designs through correlation charts developed from his investigation. Leakage resistance... geometries and land surfaces with the objective of obtaining optimized seal design criteria. The test rig utilized a flat two-dimensional stationary seal with a radial clearance-to-width ratio of approximately 100:1 to reduce wall end effects. Air...

Broussard, Daniel Harold

2012-06-07T23:59:59.000Z

165

Diverter bop system and method for a bottom supported offshore drilling rig  

SciTech Connect (OSTI)

A system and method for installing a fluid flow controller and telescoping spools beneath an offshore bottom supported drilling rig rotary table is disclosed. Upper and lower telescoping spools are provided for initially connecting a Diverter/BOP convertible fluid flow controller between structural casing in the well and a permanent housing beneath the drilling rig rotary table. Clamp means are provided for clamping the rig vent line to an opening in the housing wall of the fluid flow controller during drilling of the borehole through the structural casing in preparation for setting and cementing the conductor casing. In that mode, the system is adapted as a diverter system. After the well is drilled for the conductor casing and the conductor casing is cemented and cut off at its top, a mandrel is fitted at the top of the conductor casing to which the lower end of the lower spool may be connected. The system may be used in this configuration as a diverter system, or after removal of the vent line and connection of a kill line to the housing outlet, the system may be used as a low pressure blowout preventer system.

Roche, J. R.; Alexander, G. G.; Carbaugh, W. L.

1985-06-25T23:59:59.000Z

166

Standardization of 241Am by digital coincidence counting, liquid scintillation counting and defined solid angle counting  

E-Print Network [OSTI]

The nuclide 241Am decays by alpha emission to 237Np. Most of the decays (84.6 %) populate the excited level of 237Np with energy of 59.54 keV. Digital Coincidence Counting was applied to standardize a solution of 241Am by alpha-gamma coincidence counting with efficiency extrapolation. Electronic discrimination was implemented with a pressurized proportional counter and the results were compared with two other independent techniques: Liquid Scintillation Counting using the logical sum of double coincidences in a TDCR array and Defined Solid Angle Counting taking into account activity inhomogeneity in the active deposit. The results show consistency between the three methods within a limit of a 0.3%. An ampoule of this solution will be sent to the International Reference System (SIR) during 2009. Uncertainties were analysed and compared in detail for the three applied methods.

C. Balpardo; M. E. Capoulat; D. Rodrigues; P. Arenillas

2010-05-10T23:59:59.000Z

167

Theory versus experiment of the rotordynamic and leakage characteristics of smooth annular bushing oil seals  

E-Print Network [OSTI]

) ANGULAR CONTACT BALL BEARING TEST ROTOR HUB SEALINSERT SEAL HOUSING (END CAP) PRELOAD SPRING VACUUM SEAL ANNULAR BUSHING OIL-SEAL TEST RIG AIR TURBINE MOUNTING BASE HYDRAULIC SHAKER LOCATING SLEEVE MOUNTING BRACKET TEST OIL OUT LOCK NUT TEST... OIL OUT PULLEY AIR BUFFER SEAL AIR BUFFER SEAL 8 17,000 rpm. The test shaft is made from stainless steel and machined to a precise diameter of 116.84 mm [4.6 in ] at the test section. It is supported on the pedestals through angular contact ball...

Culotta, Vittorio G.

2005-02-17T23:59:59.000Z

168

Hanford whole body counting manual  

SciTech Connect (OSTI)

This document describes the Hanford Whole Body Counting Program as it is administered by Pacific Northwest Laboratory (PNL) in support of the US Department of Energy--Richland Operations Office (DOE-RL) and its Hanford contractors. Program services include providing in vivo measurements of internally deposited radioactivity in Hanford employees (or visitors). Specific chapters of this manual deal with the following subjects: program operational charter, authority, administration, and practices, including interpreting applicable DOE Orders, regulations, and guidance into criteria for in vivo measurement frequency, etc., for the plant-wide whole body counting services; state-of-the-art facilities and equipment used to provide the best in vivo measurement results possible for the approximately 11,000 measurements made annually; procedures for performing the various in vivo measurements at the Whole Body Counter (WBC) and related facilities including whole body counts; operation and maintenance of counting equipment, quality assurance provisions of the program, WBC data processing functions, statistical aspects of in vivo measurements, and whole body counting records and associated guidance documents. 16 refs., 48 figs., 22 tabs.

Palmer, H.E.; Rieksts, G.A.; Lynch, T.P.

1990-06-01T23:59:59.000Z

169

Counting Bitangents with Stable Maps  

E-Print Network [OSTI]

This paper is an elementary introduction to the theory of moduli spaces of curves and maps. As an application to enumerative geometry, we show how to count the number of bitangent lines to a projective plane curve of degree $d$ by doing intersection theory on moduli spaces.

David Ayala; Renzo Cavalieri

2005-12-22T23:59:59.000Z

170

Neutron Bombardment of Counting Diamonds  

Science Journals Connector (OSTI)

21 February 1956 research-article Neutron Bombardment of Counting Diamonds A. H...Examination was also made of the effect of neutron bombardment on pulse-height distribution...additional charge traps produced by the neutrons. The layered crystal texture disclosed...

1956-01-01T23:59:59.000Z

171

Peak Oil  

Science Journals Connector (OSTI)

At the start of the new millennium, the expression “Peak Oil” was unknown. Nevertheless, a discussion about when the world’s rate of oil production would reach its maximum had already ... . King Hubbert presented...

Kjell Aleklett

2012-01-01T23:59:59.000Z

172

Peak Oil  

Science Journals Connector (OSTI)

Between 2000 and 2010, world oil prices advanced from approximately $25 per barrel to more than $100 per barrel. The price appreciation of oil over the decade was around ten times the rate of inflation.

Robert Rapier

2012-01-01T23:59:59.000Z

173

Continuous injection of an inert gas through a drill rig for drilling into potentially hazardous areas  

SciTech Connect (OSTI)

A drill rig for drilling in potentially hazardous areas includes a drill having conventional features such as a frame, a gear motor, gear box, and a drive. A hollow rotating shaft projects through the drive and frame. An auger, connected to the shaft is provided with a multiplicity of holes. An inert gas is supplied to the hollow shaft and directed from the rotating shaft to the holes in the auger. The inert gas flows down the hollow shaft, and then down the hollow auger, and out through the holes in the bottom of the auger into the potentially hazardous area.

McCormick, S.H.; Pigott, W.R.

1998-04-01T23:59:59.000Z

174

Offshore oil and gas: global resource knowledge and technological change  

Science Journals Connector (OSTI)

It is argued that the contribution of technological change to the offshore oil and gas industry's progress is under-researched. As a prelude this theme, the changing geography of known offshore oil and gas resources is reviewed. Significant, and largely technologically dependent, developments are identified in terms of the industry's global spread, its extension into deep and ultradeep waters and its ability to enhance output from well-established oil and gas provinces. Three sections (on the evolution of exploration and production rigs, drilling techniques and the application of IT to improve resource knowledge and access) then examine the relationships between technological change and the offshore industry's progress. It is concluded that new technologies improve knowledge of, and access to, resources via four distinctive routes, but that the full impact of R & D is frequently related to the inter-dependence of technologies. Opportunities for further research are identified.

David Pinder

2001-01-01T23:59:59.000Z

175

Evaluation and comparison of occupational noise exposure among workers on offshore and onshore oil well drilling rigs  

E-Print Network [OSTI]

Engineering Department, for the loan of equipment used for th is research. A special gratitude goes to Ing. Jav ier Mendieta, Safety Manager of Petroleos Mexicanos, for his help for the use of PEMEX facilities in my data collection. I would also like... to thank Ing. Ignacio Torres of PEMEX Safety Engineering Division for assisting in the data collection. DEDICATION This thesis is dedicated to my parents, Estela and Humberto, and also to my little sister Kary. CONTENTS I. INTRODUCTION The Problem...

Suarez Garcia, Humberto

1984-01-01T23:59:59.000Z

176

Finger-Count & Radial-Stroke Shortcuts  

E-Print Network [OSTI]

Finger-Count & Radial-Stroke Shortcuts: Two Techniques for Augmenting Linear Menus on Multi-finger Interaction techniques ·Principles ·Finger-Counting ·Radial-Stroke 5 #12;Finger-Counting ·Express a pair;Radial-Stroke Shortcuts ·Principle ·Radial-stroke · Marking menus [Kurtenbach 91] · Multi-Stroke menus

Bailly, Gilles

177

Property:Geothermal/ProjectTypeTopic2Count | Open Energy Information  

Open Energy Info (EERE)

ProjectTypeTopic2Count ProjectTypeTopic2Count Jump to: navigation, search Property Name Geothermal/ProjectTypeTopic2Count Property Type Number Description Number of Project Type Topic 2 values. Pages using the property "Geothermal/ProjectTypeTopic2Count" Showing 25 pages using this property. (previous 25) (next 25) A Air Cooling + 0 + D Directional Drilling Systems + 0 + Drilling Systems + 2 + E EGS Demonstration + 0 + F Fluid Imaging + 2 + Fracture Characterization Technologies + 0 + G Geophysical Exploration Technologies + 0 + Geothermal Analysis + 0 + Geothermal Data Development, Collection, and Maintenance + 0 + Geothermal Energy Production from Low Temperature Resources, Coproduced Fluids from Oil and Gas Wells, and Geopressured Resources + 0 + H High Temperature Cements + 0 +

178

Counting Rises, Levels and Drops in Compositions 1 Counting Rises, Levels and  

E-Print Network [OSTI]

Counting Rises, Levels and Drops in Compositions 1 Counting Rises, Levels and Drops in Compositions Mansour Department of Mathematics, Haifa University, Israel #12;Counting Rises, Levels and Drops;Counting Rises, Levels and Drops in Compositions 3 Definitions · A composition = 12 . . . m of n N

Heubach, Silvia

179

Department of Mechanical Engineering Spring 2010 Kenya Water Well Drill Rig Redesign of Engine Drive Train System & Support Tower  

E-Print Network [OSTI]

of Engine Drive Train System & Support Tower Overview The team was presented with the task of redesigning the engine drive train system and support structure for a water drill rig to be used in Kenya. The original engine drive train system was fabricated by a professional machinist and had many intricate components

Demirel, Melik C.

180

Design and Analysis of a Test Rig for Modeling the Bit/Formation Interface in Petroleum Drilling Applications  

E-Print Network [OSTI]

and horizontal wells and measuring the effects of various factors on the stability of perturbations on the system. A test rig concept has been developed to accurately measure the interaction forces and torques between the bit, formation and fluids during drilling...

Wilson, Joshua Kyle

2013-04-11T23:59:59.000Z

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Essays on Macroeconomics and Oil  

E-Print Network [OSTI]

Oil Production . . . . . . . . . . . . . . . . . . . . . . . . . . .Oil Production in Venezuela and Mexico . . . . . . . . . .Oil Production and Productivity in Venezuela and

CAKIR, NIDA

2013-01-01T23:59:59.000Z

182

Essays on Macroeconomics and Oil  

E-Print Network [OSTI]

the Oil Industry . . . . . . . . . . . . . . . . . . . . . .in the Venezuelan Oil Industry . . . . . . . . . . . . .and Productivity: Evidence from the Oil Industry . .

CAKIR, NIDA

2013-01-01T23:59:59.000Z

183

NETL: News Release - DOE Seeks "Small-Footprint" Oil and Gas Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

June 16, 2004 June 16, 2004 DOE Seeks "Small-Footprint" Oil and Gas Technologies Two-Inch "Microholes" Could Lessen Environmental Impacts, Costs The Department of Energy (DOE) today announced a major new research and development initiative to develop "microhole" technologies - those that use portable drilling rigs with a smaller footprint and lower environmental impact. The program is designed to bring about faster, cheaper and safer oil and gas projects. "This is a major new research and development initiative that is aimed at reducing the environmental footprint of oil and gas operations at the same time it reduces costs and increases America's oil and gas production," Secretary of Energy Spencer Abraham said. "It's clear this initiative will help meet President Bush's goals for energy and the environment."

184

OIL IMPORTS: For and Against  

Science Journals Connector (OSTI)

OIL IMPORTS: For and Against ... The eight—Ashland Oil, Atlantic Richfield, Cities Service, Marathon Oil, Mobil Oil, Standard Oil (Ind.), ...

1969-07-28T23:59:59.000Z

185

Microbial desulfurization of Eastern oil shale: Bioreactor studies  

SciTech Connect (OSTI)

The removal of sulfur from Eastern oil shale (40 microns particle size) slurries in bioreactors by mixed microbial cultures was examined. A mixed culture that is able to remove the organic sulfur from model sulfur compounds presenting coal as well as a mixed culture isolated from oil shale enrichments were evaluated. The cultures were grown in aerobic fed-batch bioreactors where the oil shale served as the source of all nutrients except organic carbon. Glucose was added as an auxiliary carbon source. Microbial growth was monitored by plate counts, the pH was checked periodically, and oil shale samples were analyzed for sulfur content. Results show a 24% reduction in the sulfur content of the oil shale after 14 days. The settling characteristics of the oil shale in the bioreactors were examined in the presence of the microbes. Also, the mixing characteristics of the oil shale in the bioreactors were examined. 10 refs., 6 figs., 5 tabs.

Maka, A.; Akin, C.; Punwani, D.V.; Lau, F.S.; Srivastava, V.J.

1989-01-01T23:59:59.000Z

186

Bioconversion of Heavy oil.  

E-Print Network [OSTI]

??70 % of world?s oil reservoirs consist of heavy oil, and as the supply of conventional oil decreases, researchers are searching for new technologies to… (more)

Steinbakk, Sandra

2011-01-01T23:59:59.000Z

187

Colours, luminosity functions and counts of galaxies  

Science Journals Connector (OSTI)

......estimate the LF at large redshifts, a way to pro- 1996 RAS, MNRAS 283, 865-872 Colours, LFs and counts ofgalaxies 871 ceed is by carefully evaluating the present-day LF in order to infer from it, and from the observed counts, its evolution as a......

P. Saracco; G. Chincarini; A. Iovino

1996-12-01T23:59:59.000Z

188

5 World Oil Trends WORLD OIL TRENDS  

E-Print Network [OSTI]

5 World Oil Trends Chapter 1 WORLD OIL TRENDS INTRODUCTION In considering the outlook for California's petroleum supplies, it is important to give attention to expecta- tions of what the world oil market. Will world oil demand increase and, if so, by how much? How will world oil prices be affected

189

Job Counting Guidelines | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Mission » Recovery Act » Job Counting Guidelines Mission » Recovery Act » Job Counting Guidelines Job Counting Guidelines The following updated definitions and guidelines are intended to provide EM Recovery Act sites with information to collect and report timely and accurate full-time equivalent and cumulative head-count data for both monthly and quarterly jobs data calls. These revised guidelines supersede the previous monthly jobs data reporting definitions and guidelines dated February 9, 2010. These revised guidelines remain consistent with OMB guidance issued December 18, 2009 and cover subcontractors and vendors as well as prime contractors. Job Counting Guidelines More Documents & Publications EA-1548: Finding of No Significant Impact Microsoft Word - Horizon Wind Energy Comments.docx Proceedings of the Computational Needs for the Next Generation Electric

190

of oil yields from enhanced oil recovery  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

oil yields from enhanced oil recovery (EOR) and CO oil yields from enhanced oil recovery (EOR) and CO 2 storage capacity in depleted oil reservoirs. The primary goal of the project is to demonstrate that remaining oil can be economically produced using CO 2 -EOR technology in untested areas of the United States. The Citronelle Field appears to be an ideal site for concurrent CO 2 storage and EOR because the field is composed of sandstone reservoirs

191

Hydrotreating of oil from eastern oil shale  

SciTech Connect (OSTI)

Oil shale provides one of the major fossil energy reserves for the United States. The quantity of reserves in oil shale is less than the quantity in coal, but is much greater (by at least an order of magnitude) than the quantity of crude oil reserves. With so much oil potentially available from oil shale, efforts have been made to develop techniques for its utilization. In these efforts, hydrotreating has proved to be an acceptable technique for upgrading raw shale oil to make usuable products. The present work demonstrated the use of the hydrotreating technique for upgrading an oil from Indiana New Albany oil shale.

Scinta, J.; Garner, J.W.

1984-01-01T23:59:59.000Z

192

Complexity of Counting CSP with Complex Weights  

E-Print Network [OSTI]

We give a complexity dichotomy theorem for the counting Constraint Satisfaction Problem (#CSP in short) with complex weights. To this end, we give three conditions for its tractability. Let F be any finite set of complex-valued functions, then we prove that #CSP(F) is solvable in polynomial time if all three conditions are satisfied; and is #P-hard otherwise. Our complexity dichotomy generalizes a long series of important results on counting problems: (a) the problem of counting graph homomorphisms is the special case when there is a single symmetric binary function in F; (b) the problem of counting directed graph homomorphisms is the special case when there is a single not-necessarily-symmetric binary function in F; and (c) the standard form of #CSP is when all functions in F take values in {0,1}.

Cai, Jin-Yi

2011-01-01T23:59:59.000Z

193

Low cost crowd counting using audio tones  

E-Print Network [OSTI]

With mobile devices becoming ubiquitous, collaborative applications have become increasingly pervasive. In these applications, there is a strong need to obtain a count of the number of mobile devices present in an area, ...

Kannan, Pravein Govindan

194

Rack Module Enhancements of Counting Invariants  

E-Print Network [OSTI]

We introduce a modified rack algebra Z[X] for racks X with finite rack rank N. We use representations of Z[X] into rings, known as rack modules, to define enhancements of the rack counting invariant for classical and virtual knots and links. We provide computations and examples to show that the new invariants are strictly stronger than the unenhanced counting invariant and are not determined by the Jones or Alexander polynomials.

Haas, Aaron; Nelson, Sam; Yuen, Jonah; Zhan, Qingcheng

2010-01-01T23:59:59.000Z

195

Near Shore Submerged Oil Assessment  

E-Print Network [OSTI]

) oil spill in the Gulf of Mexico, submerged oil refers to near shore oil which has picked up sediments You Should Know About Submerged Oil 1. Submerged oil is relatively uncommon: DWH oil is a light crude

196

California Natural Gas Count of Underground Storage Capacity...  

U.S. Energy Information Administration (EIA) Indexed Site

Count of Underground Storage Capacity (Number of Elements) California Natural Gas Count of Underground Storage Capacity (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3...

197

OIl Speculation  

Gasoline and Diesel Fuel Update (EIA)

Investor Investor Flows and the 2008 Boom/Bust in Oil Prices Kenneth J. Singleton 1 August 10, 2011 1 Graduate School of Business, Stanford University, kenneths@stanford.edu. This research is the outgrowth of a survey paper I prepared for the Air Transport Association of America. I am grateful to Kristoffer Laursen for research assistance and to Kristoffer and Stefan Nagel for their comments. Abstract This paper explores the impact of investor flows and financial market conditions on returns in crude-oil futures markets. I begin by arguing that informational frictions and the associated speculative activity may induce prices to drift away from "fundamental" values and show increased volatility. This is followed by a discussion of the interplay between imperfect infor- mation about real economic activity, including supply, demand, and inventory accumulation, and speculative

198

FLOP Counts for Single-Node Tests  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

FLOP Counts for "Small" Single-Node Miniapplication Tests FLOP Counts for "Small" Single-Node Miniapplication Tests FLOP Counts for "Small" Single-Node Miniapplication Tests These data, obtained using the NERSC Hopper system, are provided for reference. Code MPI Tasks Threads Reference TFLOP Count Benchmark Time (seconds) # of iterations miniFE 144 1 5.05435E+12 130.2 (total program time) miniGhost 96 1 6.55500E+12 76.5 AMG 96 1 1.30418E+12 66.95 18 UMT 96 1 1.30211E+13 416.99 49 SNAP 96 1 5.84246E+11 15.37 3059 miniDFT 40 1 2.32379E+13 153.97 GTC 64 1 6.63670E+13 1839.4 MILC 24 1 1.45971E+13 744.3 CORRECTION (02 August 2013): The values given for the reference counts are FLOPs, not TFLOPs. Last edited: 2013-08-02 09:40:18

199

TRAC-PF1/MOD3 calculations of Savannah River Laboratory Rig FA single-annulus heated experiments  

SciTech Connect (OSTI)

This paper presents the results of TRAC-PF1/MOD3 benchmarks of the Rig FA experiments performed at the Savannah River Laboratory to simulate prototypic reactor fuel assembly behavior over a range of fluid conditions typical of the emergency cooling system (ECS) phase of a loss-of-coolant accident (LOCA). The primary purpose of this work was to use the SRL Rig FA tests to qualify the TRAC-PF1/MOD3 computer code and models for computing Mark-22 fuel assembly LOCA/ECS power limits. This qualification effort was part of a larger effort undertaken by the Los Alamos National Laboratory for the US Department of Energy to independently confirm power limits for the Savannah River Site K Reactor. The results of this benchmark effort as discussed in this paper demonstrate that TRAC/PF1/MOD3 coupled with proper modeling is capable of simulating thermal-hydraulic phenomena typical of that encountered in Mark-22 fuel assembly during LOCA/ECS conditions.

Fischer, S.R.; McDaniel, C.K.

1992-01-01T23:59:59.000Z

200

Experimental analysis of control loops with different delay times in the supply air system of a radiator test rig  

Science Journals Connector (OSTI)

The test rig of low-temperature hot-water radiator is a typical multi-input multi-output (MIMO) thermal system with large time delay. Aiming at the control of the supply air temperature and the temperature of the environmental chamber in the test rig, the paper carries out the fuzzy control experiments and PI control experiments based on adjusting the electric heater in the supply air system, in which there are two control loops with various delay time. The experiments researched two types of fuzzy control methods which are the basic fuzzy control (BFC), and the self-organizing rules fuzzy control (SORFC) with zero initial control rules. For the control loop of supply air temperature with short delay time, PI control performs better with fast convergence speed and small overshoot than the BFC and the SORFC. The convergence speed of the BFC method is lower than other two control methods. For the control loop of chamber temperature with long delay time, the SORFC has a satisfied control performance with less overshoot and stable error than the BFC and PI control.

Yongpan Chen; Jili Zhang; Zhen Lu; Tianyi Zhao; Hui Liu

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Optical planar waveguide for cell counting  

Science Journals Connector (OSTI)

Low cost counting of cells has medical applications in screening military medicine disaster medicine and rural healthcare. In this report we present a shallow buried planar waveguide fabricated by potassium ion exchange in glass that enables low-cost and rapid counting of metal-tagged objects that lie in the evanescent field of the waveguide. Laser light transmitted through the waveguide was attenuated proportionately to the presence of metal-coated microstructures fabricated from photoresist. This technology enables the low-cost enumeration of cells from blood urine or other biofluids.

John LeBlanc; Andrew J. Mueller; Adrian Prinz; Manish J. Butte

2012-01-01T23:59:59.000Z

202

Environmental disaster or just a drop in the bucket: Texas scientists on the real effects of the Deewater Horizon oil spill  

E-Print Network [OSTI]

Winter 2011 tx H2O 3 or just a drop in thebucket?Texas scientists on the real e#31;ects of the Deepwater Horizon oil spill 4 tx H2O Winter 2011 Environmental Disaster Continued What if gasoline pumped into cars, seafood eaten at restaurants... but forgo#27;en as the wreckage of the Deepwater Horizon MC#31;#30;#31; drilling platform sank into its waters. A crude awakening Like any large oil spill, this one took its toll in many ways. Eleven BP employees on the rig died in the explosion...

Lee, Leslie

2011-01-01T23:59:59.000Z

203

Environmental disaster or just a drop in the bucket?: Texas scientists on the real effects of the Deepwater Horizon oil spill  

E-Print Network [OSTI]

Winter 2011 tx H2O 3 or just a drop in thebucket?Texas scientists on the real e#31;ects of the Deepwater Horizon oil spill 4 tx H2O Winter 2011 Environmental Disaster Continued What if gasoline pumped into cars, seafood eaten at restaurants... but forgo#27;en as the wreckage of the Deepwater Horizon MC#31;#30;#31; drilling platform sank into its waters. A crude awakening Like any large oil spill, this one took its toll in many ways. Eleven BP employees on the rig died in the explosion...

Lee, Leslie

2011-01-01T23:59:59.000Z

204

China's Global Oil Strategy  

E-Print Network [OSTI]

capability to secure oil transport security. Additionally,international oil agreements: 1) ensuring energy security;security, and many argue that as the second-largest consumer of oil

Thomas, Bryan G

2009-01-01T23:59:59.000Z

205

Understanding Crude Oil Prices  

E-Print Network [OSTI]

2007”. comparison, Mexico used 6.6— Chinese oil consumption17. Oil production from the North Sea, Mexico’s Cantarell,Mexico, Italy, France, Canada, US, and UK. Figure 10. Historical Chinese oil

Hamilton, James Douglas

2008-01-01T23:59:59.000Z

206

Understanding Crude Oil Prices  

E-Print Network [OSTI]

2004. “OPEC’s Optimal Crude Oil Price,” Energy Policy 32(2),023 Understanding Crude Oil Prices James D. Hamilton Junedirectly. Understanding Crude Oil Prices* James D. Hamilton

Hamilton, James Douglas

2008-01-01T23:59:59.000Z

207

Understanding Crude Oil Prices  

E-Print Network [OSTI]

business of having some oil in inventory, which is referredKnowledge of all the oil going into inventory today for salebe empty, because inventories of oil are essential for the

Hamilton, James Douglas

2008-01-01T23:59:59.000Z

208

Understanding Crude Oil Prices  

E-Print Network [OSTI]

2004. “OPEC’s Optimal Crude Oil Price,” Energy Policy 32(2),percent change in real oil price. Figure 3. Price of crude023 Understanding Crude Oil Prices James D. Hamilton June

Hamilton, James Douglas

2008-01-01T23:59:59.000Z

209

Understanding Crude Oil Prices  

E-Print Network [OSTI]

2004. “OPEC’s Optimal Crude Oil Price,” Energy Policy 32(2),percent change in real oil price. Figure 3. Price of crudein predicting quarterly real oil price change. variable real

Hamilton, James Douglas

2008-01-01T23:59:59.000Z

210

China's Global Oil Strategy  

E-Print Network [OSTI]

by this point, China’s demand Oil Demand vs. Domestic Supplycurrent pace of growth in oil demand as staying consistentand predictions of oil supply and demand affected foreign

Thomas, Bryan G

2009-01-01T23:59:59.000Z

211

Understanding Crude Oil Prices  

E-Print Network [OSTI]

and Income on Energy and Oil Demand,” Energy Journal 23(1),2006. “China’s Growing Demand for Oil and Its Impact on U.S.in the supply or demand for oil itself could be regarded as

Hamilton, James Douglas

2008-01-01T23:59:59.000Z

212

Small (5 million Btu/h) and large (300 million Btu/h) thermal test rigs for coal and coal slurry burner development  

SciTech Connect (OSTI)

NEI International Combustion Ltd. of Derby, England, now operates two thermal test rigs for the development of burners capable of handling coal-water slurries (CWS). A general description of the large rig and its capacity was given. Also, the necessary conversions of the equipment to handle CWS were described. Information on the properties of the CWS was included. This consisted of chemical analysis of the parent coal and the slurry, sieve analysis of a dry sample, and viscosity versus temperature data of the CWS. The process of design development of the burner was outlined. Ten illustrations were presented, including schematic diagrams of equipment and graphs of data.

Allen, J.W.; Beal, P.R.; Hufton, P.F.

1983-01-01T23:59:59.000Z

213

Understanding Crude Oil Prices  

E-Print Network [OSTI]

2007”. comparison, Mexico used 6.6— Chinese oil consumption17. Oil production from the North Sea, Mexico’s Cantarell,

Hamilton, James Douglas

2008-01-01T23:59:59.000Z

214

Desulfurization of heavy oil  

Science Journals Connector (OSTI)

Strategies for heavy oil desulfurization were evaluated by reviewing desulfurization literature and critically assessing the viability of the various methods for heavy oil. The desulfurization methods includin...

Rashad Javadli; Arno de Klerk

2012-03-01T23:59:59.000Z

215

China's Global Oil Strategy  

E-Print Network [OSTI]

China’s domestic oil supply will peak, and demand Robertpeak will come around 2020, 24 and that by this point, China’s demand Oil

Thomas, Bryan G

2009-01-01T23:59:59.000Z

216

Tall oil pitch  

Science Journals Connector (OSTI)

n....Undistilled residue from the distillation of crude tall oil. It is generally recognized that tall oil pitches contain some high-boiling esters and neutral...

2007-01-01T23:59:59.000Z

217

China's Global Oil Strategy  

E-Print Network [OSTI]

Analysts agree that the Persian Gulf region will continue tos oil imports. 17 The Persian Gulf region is particularlyaccess to oil from the Persian Gulf because of conflict

Thomas, Bryan G

2009-01-01T23:59:59.000Z

218

oil1990.xls  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

(dollars) (dollars) (dollars) (dollars) Table 1. Consumption and Expenditures in U.S. Households that Use Fuel OilKerosene, 1990 Residential Buildings Average Fuel Oil...

219

Oil Sands Feedstocks  

Broader source: Energy.gov (indexed) [DOE]

Centre for Upgrading Technology 'a Canada-Alberta alliance for bitumen and heavy oil research' Oil Sands Feedstocks C Fairbridge, Z Ring, Y Briker, D Hager National Centre...

220

Crude Oil Domestic Production  

U.S. Energy Information Administration (EIA) Indexed Site

Data Series: Crude Oil Domestic Production Refinery Crude Oil Inputs Refinery Gross Inputs Refinery Operable Capacity (Calendar Day) Refinery Percent Operable Utilization Net...

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Gas Filled Detectors counting & tracking of  

E-Print Network [OSTI]

Gas Filled Detectors counting & tracking of particles energy loss generation of electron-ion+ pairs #12;Gas Filled Detectors Primary and Total Ionization fast charged particles ionize the atoms of a gas fraction of resulting primary electrons have enough kinetic energy to ionize other atoms #12;Gas Filled

Peletier, Reynier

222

Biochemically enhanced oil recovery and oil treatment  

DOE Patents [OSTI]

This invention relates to the preparation of new, modified organisms, through challenge growth processes, that are viable in the extreme temperature, pressure and pH conditions and salt concentrations of an oil reservoir and that are suitable for use in microbial enhanced oil recovery. The modified microorganisms of the present invention are used to enhance oil recovery and remove sulfur compounds and metals from the crude oil. 62 figures.

Premuzic, E.T.; Lin, M.

1994-03-29T23:59:59.000Z

223

Biochemically enhanced oil recovery and oil treatment  

DOE Patents [OSTI]

This invention relates to the preparation of new, modified organisms, through challenge growth processes, that are viable in the extreme temperature, pressure and pH conditions and salt concentrations of an oil reservoir and that are suitable for use in microbial enhanced oil recovery. The modified microorganisms of the present invention are used to enhance oil recovery and remove sulfur compounds and metals from the crude oil.

Premuzic, Eugene T. (East Moriches, NY); Lin, Mow (Rocky Point, NY)

1994-01-01T23:59:59.000Z

224

Model methodology and data description of the Production of Onshore Lower 48 Oil and Gas model  

SciTech Connect (OSTI)

This report documents the methodology and data used in the Production of Onshore Lower 48 Oil and Gas (PROLOG) model. The model forecasts annual oil and natural gas production on a regional basis. Natural gas is modeled by gas category, generally conforming to categories defined by the Natural Gas Policy Act (NGPA) of 1978, as well as a category representing gas priced by way of a spot market (referred to as ''spot'' gas). A linear program is used to select developmental drilling activities for conventional oil and gas and exploratory drilling activities for deep gas on the basis of their economic merit, subject to constraints on available rotary rigs and constraints based on historical drilling patterns. Using exogenously specified price paths for oil and gas, net present values are computed for fixed amounts of drilling activity for oil and gas development and deep gas exploration in each of six onshore regions. Through maximizing total net present value, the linear program provides forecasts of drilling activities, reserve additions, and production. Oil and shallow gas exploratory drilling activities are forecast on the basis of econometrically derived equations, which are dependent on specified price paths for the two fuels. 10 refs., 3 figs., 10 tabs.

Not Available

1988-09-01T23:59:59.000Z

225

Type A Accident Investigation of the June 21, 2001, Drilling Rig Operator Injury at the Fermi National Accelerator Laboratory, August 2001  

Broader source: Energy.gov [DOE]

On June 21, 2001, at approximately 9:40 A.M., a construction sub-tier contractor employee (the “Operator”) at the Fermi National Accelerator Laboratory (Fermilab) received serious head injuries requiring hospitalization when he was struck by part of the drilling rig (a “tong”) that he was operating.

226

A Hardware-in-the-Loop Test Rig for Designing Near-Earth Aerial Robotics Vefa Narli and Paul Y. Oh  

E-Print Network [OSTI]

and build- ings. The lack of flight data and performance metrics poses a gap that prevents the analytical is a full-scale diorama of a near-Earth environment like forests. The rig is used to capture metrics adverse weather conditions and obscurants, like fog, rain or dust. A key gap in the knowledge domain

Oh, Paul

227

Ships After Oil  

Science Journals Connector (OSTI)

Ships After Oil ... Special self-propelled tenders planned for offshore drilling operations in Gulf ...

1956-07-02T23:59:59.000Z

228

OIL & GAS INSTITUTE Introduction  

E-Print Network [OSTI]

OIL & GAS INSTITUTE CONTENTS Introduction Asset Integrity Underpinning Capabilities 2 4 4 6 8 9 10 COMPETITIVENESS UNIVERSITY of STRATHCLYDE OIL & GAS INSTITUTE OIL & GAS EXPERTISE AND PARTNERSHIPS #12;1 The launch of the Strathclyde Oil & Gas Institute represents an important step forward for the University

Mottram, Nigel

229

Oil | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Oil Oil Oil Oil Prices, 2000-2008 For the first time since 1995, U.S. oil production has surpassed imports. Explore the trend with our interactive chart. | Graphic by Daniel Wood, Energy Department. For the first time since 1995, U.S. oil production has surpassed imports. Explore the trend with our interactive chart. | Graphic by Daniel Wood, Energy Department. Oil is used for heating and transportation -- most notably, as fuel for gas-powered vehicles. America's dependence on foreign oil has declined in recent years, but oil prices have increased. The Energy Department supports research and policy options to increase our domestic supply of oil while ensuring environmentally sustainable supplies domestically and abroad, and is investing in research, technology and

230

Oil Dependencies and Peak Oil's Effects on Oil Consumption.  

E-Print Network [OSTI]

?? During the year of 2007, the world has experienced historically high oil prices both in nominal and in real terms, which has reopened discussions… (more)

Tekin, Josef

2007-01-01T23:59:59.000Z

231

COUNTING WITH IRRATIONAL TILES SCOTT GARRABRANT  

E-Print Network [OSTI]

and rational side lengths. Note that the dark shaded tiles here are bookends, i.e. every tiling of [1 Ã? n] must f(n) is in F1, i.e. equal to fT (n) for all n 1 and some rational set of tiles T as aboveCOUNTING WITH IRRATIONAL TILES SCOTT GARRABRANT AND IGOR PAK Abstract. We introduce and study

Pak, Igor

232

High-rate counting efficiency of VLPC  

SciTech Connect (OSTI)

A simple model is applied to describe dependencies of Visible Light Photon Counter (VLPC) characteristics on temperature and operating voltage. Observed counting efficiency losses at high illumination, improved by operating at higher temperature, are seen to be a consequence of de-biasing within the VLPC structure. A design improvement to minimize internal de-biasing for future VLPC generations is considered. {copyright} {ital 1998 American Institute of Physics.}

Hogue, H.H. [Research and Technology Center, Boeing Electronic Systems and Missile Defense, 3370 Miraloma Ave M/S HB17, Anaheim, California 92803 (United States)

1998-11-01T23:59:59.000Z

233

Turbine cooling waxy oil  

SciTech Connect (OSTI)

A process for pipelining a waxy oil to essentially eliminate deposition of wax on the pipeline wall is described comprising: providing a pressurized mixture of the waxy oil and a gas; effecting a sudden pressure drop of the mixture of the oil and the gas through an expansion turbine, thereby expanding the gas and quickly cooling the oil to below its cloud point in the substantial absence of wax deposition and forming a slurry of wax particles and oil; and pipelining the slurry.

Geer, J.S.

1987-10-27T23:59:59.000Z

234

Galactic structure studies with BATC star counts  

E-Print Network [OSTI]

We report the first results of star counts carried out with the National Astronomical Observatories (NAOC) 60/90 cm Schmidt Telescope in 15 intermediate-band filters from 3000 to 10000 {\\AA} in the BATC survey. We analyze a sample of over 1400 main sequence stars ($14\\le$V$\\le21$), which lie in the field with central coordinates R.A.=$09^h53^m13^s.30$ and DEC=47$^\\circ49^{\\prime}00^{\\prime\\prime}.0$ (J2000). The field of view is 0.95 deg$^{2}$, and the spatial scale was $1\\arcsec.67$. In our model, the distribution of stars perpendicular to the plane of the Galaxy is given by two exponential disks (thin disk plus thick disk) and a de Vaucouleurs halo. Based on star counts, we derive the scale heights of the thin disk to be $320^{+14}_{-15}$ pc and of the thick disk to be $640^{+30}_{-32}$ pc, respectively, with a local density of $7.0\\pm1%$ of the thin disk. We find that the observed counts support an axial ratio of $c/a\\le0.6$ for a de Vaucouleurs $r^{1/4}$ law, implying a more flattened halo. We also derive...

Du, C; Ma, J; Chen, A B C; Yang, Y; Li, J; Wu, H; Jiang, Z; Chen, J; Du, Cuihua; Zhou, Xu; Ma, Jun; Chen, Alfred B-C; Yang, Yanbin; Li, Jiuli; Wu, Hong; Jiang, Zhaoji; Chen, Jiansheng

2003-01-01T23:59:59.000Z

235

Full Counting Statistics of Stationary Particle Beams  

E-Print Network [OSTI]

We present a general scheme for treating particle beams as many particle systems. This includes the full counting statistics and the requirements of Bose/Fermi symmetry. In the stationary limit, i.e., for longer and longer beams, the total particle number diverges, and a description in Fock space is no longer possible. We therefore extend the formalism to include stationary beams. These beams exhibit a well-defined "local" counting statistics, by which we mean the full counting statistics of all clicks falling into any given finite interval. We treat in detail a model of a source, creating particles in a fixed state, which then evolve under the free time evolution, and we determine the resulting stationary beam in the far field. In comparison to the one-particle picture we obtain a correction due to Bose/Fermi statistics, which depends on the emission rate. We also consider plane waves as stationary many particle states, and determine the distribution of intervals between successive clicks in such a beam.

J. Kiukas; A. Ruschhaupt; R. F. Werner

2011-03-07T23:59:59.000Z

236

It's the little things that count | National Nuclear Security...  

National Nuclear Security Administration (NNSA)

NPO News Releases It's the little things that count It's the little things that count OAK RIDGE, Tenn. -- In just five months, the Jack Case Center at the National Nuclear...

237

Measurement of zero-count probability in photoelectron statistics  

Science Journals Connector (OSTI)

The probability of zero-count P0(T) (as a function of the counting interval T) is one of the most interesting functions characterizing a light field. Experimentally,...

Basano, L; Ottonello, P

1982-01-01T23:59:59.000Z

238

Alternative Fuels Data Center: Alternative Fueling Station Counts by State  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Locate Stations Locate Stations Printable Version Share this resource Send a link to Alternative Fuels Data Center: Alternative Fueling Station Counts by State to someone by E-mail Share Alternative Fuels Data Center: Alternative Fueling Station Counts by State on Facebook Tweet about Alternative Fuels Data Center: Alternative Fueling Station Counts by State on Twitter Bookmark Alternative Fuels Data Center: Alternative Fueling Station Counts by State on Google Bookmark Alternative Fuels Data Center: Alternative Fueling Station Counts by State on Delicious Rank Alternative Fuels Data Center: Alternative Fueling Station Counts by State on Digg Find More places to share Alternative Fuels Data Center: Alternative Fueling Station Counts by State on AddThis.com... Alternative Fueling Station Counts by State

239

Essays on Macroeconomics and Oil  

E-Print Network [OSTI]

Oil Production in Venezuela and Mexico . . . . . . . . . .Venezuela with Mexico, another major oil pro- ducing countryOil Production and Productivity in Venezuela and Mexico . . . . . . . .

CAKIR, NIDA

2013-01-01T23:59:59.000Z

240

Essays on Macroeconomics and Oil  

E-Print Network [OSTI]

Oil Production in Venezuela and Mexico . . . . . . . . . .Oil Production and Productivity in Venezuela and Mexico . . . . . . . .2.6: Oil Production in Venezuela and Mexico 350 Productivity

CAKIR, NIDA

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

AN ENGINE OIL LIFE ALGORITHM.  

E-Print Network [OSTI]

??An oil-life algorithm to calculate the remaining percentage of oil life is presented as a means to determine the right time to change the oil… (more)

Bommareddi, Anveshan

2009-01-01T23:59:59.000Z

242

Production of Onshore Lower-48 Oil and Gas-model methodology and data description. [PROLOG  

SciTech Connect (OSTI)

This report documents the methodology and data used in the Production of Onshore Lower-48 Oil and Gas (PROLOG) model. The model forecasts annual oil and natural gas production on a regional basis. A linear program is used to select drilling activities for conventional oil and gas on the basis of their economic merit, subject to constraints on available rotary rigs and constraints based on historical drilling patterns. Using an exogenously specified price path, net present values are computed for fixed amounts of drilling activity for oil and gas, and for exploration and development in each of six onshore regions. Forecasts of drilling for enhanced gas recovery (EGR) are exogenously determined, and this drilling is included when considering the constraints on drilling rigs. The report is organized as follows. Chapter 2 is a general overview of the model, describing the major characteristics of the methodology and the logical interaction of the various modules. Chapter 3 specifies the structure of the linear program including the equations for the objective function and the constraints. The details of the methodology used to model exploratory, developmental, and deep gas drilling are presented in Chapters 4-6, respectively. Chapter 7 presents a discussion of the economic evaluation which takes place in each discounted cash flow calculation performed by the model. Cost equations are presented, and various user-specified options as to how to incorporate these costs are discussed. Methodological details and equations used to model finding rates and revisions are given in Chapter 8. Possible areas of future enhancements to the PROLOG model are presented in Chapter 9.

Carlson, M.; Kurator, W.; Mariner-Volpe, B.; O'Neill, R.; Trapmann, W.

1982-06-01T23:59:59.000Z

243

Economics of Peak Oil  

Science Journals Connector (OSTI)

Abstract ‘Peak oil’ refers to the future decline in world production of crude oil and the accompanying potentially calamitous effects. The peak oil literature typically rejects economic analysis. This article argues that economic analysis is indeed appropriate for analyzing oil scarcity because standard economic models can replicate the observed peaks in oil production. Moreover, the emphasis on peak oil is misplaced as peaking is not a good indicator of scarcity, peak oil techniques are overly simplistic, the catastrophes predicted by the peak oil literature are unlikely, and the literature does not contribute to correcting identified market failures. Efficiency of oil markets could be improved by instead focusing on remedying market failures such as excessive private discount rates, environmental externalities, market power, insufficient innovation incentives, incomplete futures markets, and insecure property rights.

S.P. Holland

2013-01-01T23:59:59.000Z

244

Apparatus for distilling shale oil from oil shale  

SciTech Connect (OSTI)

An apparatus for distilling shale oil from oil shale comprises: a vertical type distilling furnace which is divided by two vertical partitions each provided with a plurality of vent apertures into an oil shale treating chamber and two gas chambers, said oil shale treating chamber being located between said two gas chambers in said vertical type distilling furnace, said vertical type distilling furnace being further divided by at least one horizontal partition into an oil shale distilling chamber in the lower part thereof and at least one oil shale preheating chamber in the upper part thereof, said oil shale distilling chamber and said oil shale preheating chamber communication with each other through a gap provided at an end of said horizontal partition, an oil shale supplied continuously from an oil shale supply port provided in said oil shale treating chamber at the top thereof into said oil shale treating chamber continuously moving from the oil shale preheating chamber to the oil shale distilling chamber, a high-temperature gas blown into an oil shale distilling chamber passing horizontally through said oil shale in said oil shale treating chamber, thereby said oil shale is preheated in said oil shale preheating chamber, and a gaseous shale oil is distilled from said preheated oil shale in said oil shale distilling chamber; and a separator for separating by liquefaction a gaseous shale oil from a gas containing the gaseous shale oil discharged from the oil shale preheating chamber.

Shishido, T.; Sato, Y.

1984-02-14T23:59:59.000Z

245

Word Pro - S5  

U.S. Energy Information Administration (EIA) Indexed Site

Crude Oil and Natural Gas Crude Oil and Natural Gas Resource Development Figure 5.1 Crude Oil and Natural Gas Resource Development Indicators Rotary Rigs in Operation by Type, 1949-2012 Rotary Rigs in Operation by Type, Monthly Active Well Service Rig Count, Monthly Total Wells Drilled by Type, 1949-2010 . 76 U.S. Energy Information Administration / Monthly Energy Review November 2013 Total 1950 1955 1960 1965 1970 1975 1980 1985 1990 1995 2000 2005 2010 0 1 2 3 4 Thousand Rigs 1950 1955 1960 1965 1970 1975 1980 1985 1990 1995 2000 2005 2010 0 10 20 30 40 50 Thousand Wells Dry Wells Crude Oil Wells Web Page: http://www.eia.gov/totalenergy/data/monthly/#crude. Sources: Tables 5.1 and 5.2.

246

Oil and Gas Supply Module  

Gasoline and Diesel Fuel Update (EIA)

Onshore Lower 48 Oil and Gas Supply Submodule, Offshore Oil and Gas Supply Submodule, Oil Shale Supply Submodule1, and Alaska Oil and Gas Supply Submodule. A detailed description...

247

Oil and Gas Supply Module  

Gasoline and Diesel Fuel Update (EIA)

Onshore Lower 48 Oil and Gas Supply Submodule, Offshore Oil and Gas Supply Submodule, Oil Shale Supply Submodule, and Alaska Oil and Gas Supply Submodule. A detailed description of...

248

Oil and Gas Exploration  

E-Print Network [OSTI]

Metals Industrial Minerals Oil and Gas Geothermal Exploration Development Mining Processing Nevada, oil and gas, and geothermal activities and accomplishments in Nevada: production statistics, exploration and development including drilling for petroleum and geothermal resources, discoveries of ore

Tingley, Joseph V.

249

China's Global Oil Strategy  

E-Print Network [OSTI]

21, 2008. Ying, Wang. “ China, Venezuela firms to co-developApril 21, “China and Venezuela sign oil agreements. ” Chinaaccessed April 21, “Venezuela and China sign oil deal. ” BBC

Thomas, Bryan G

2009-01-01T23:59:59.000Z

250

Using Oils As Pesticides  

E-Print Network [OSTI]

Petroleum and plant-derived spray oils show increasing potential for use as part of Integrated Pest Management systems for control of soft-bodied pests on fruit trees, shade trees, woody ornamentals and household plants. Sources of oils, preparing...

Bogran, Carlos E.; Ludwig, Scott; Metz, Bradley

2006-10-30T23:59:59.000Z

251

Residential heating oil price  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

heating oil price decreases The average retail price for home heating oil fell 6.3 cents from a week ago to 2.91 per gallon. That's down 1.10 from a year ago, based on the...

252

Residential heating oil price  

U.S. Energy Information Administration (EIA) Indexed Site

heating oil price decreases The average retail price for home heating oil fell 7.5 cents from a week ago to 2.84 per gallon. That's down 1.22 from a year ago, based on the...

253

Residential heating oil price  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

heating oil price decreases The average retail price for home heating oil fell 7.6 cents from a week ago to 2.97 per gallon. That's down 1.05 from a year ago, based on the...

254

Residential heating oil price  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

heating oil price decreases The average retail price for home heating oil fell 3.6 cents from a week ago to 3.04 per gallon. That's down 99.4 cents from a year ago, based on the...

255

US Crude oil exports  

Gasoline and Diesel Fuel Update (EIA)

2014 EIA Energy Conference U.S. Crude Oil Exports July 14, 2014 By Lynn D. Westfall U.S. Energy Information Administration U.S. crude oil production has grown by almost 50% since...

256

Oil shale retorted underground  

Science Journals Connector (OSTI)

Oil shale retorted underground ... Low-temperature underground retorting of oil shale produces a crude oil with many attractive properties, Dr. George R. Hill of the University of Utah told a meeting of the American Institute of Mining, Metallurgical, and Petroleum Engineers last week in Los Angeles. ... Typical above-ground retorting of oil shale uses temperatures of 900° to 1100° F. because of the economic need ... ...

1967-02-27T23:59:59.000Z

257

Biochemical upgrading of oils  

DOE Patents [OSTI]

A process for biochemical conversion of heavy crude oils is provided. The process includes contacting heavy crude oils with adapted biocatalysts. The resulting upgraded oil shows, a relative increase in saturated hydrocarbons, emulsions and oxygenates and a decrease in compounds containing organic sulfur, organic nitrogen and trace metals. Adapted microorganisms which have been modified under challenged growth processes are also disclosed. 121 figs.

Premuzic, E.T.; Lin, M.S.

1999-01-12T23:59:59.000Z

258

Exploiting heavy oil reserves  

E-Print Network [OSTI]

North Sea investment potential Exploiting heavy oil reserves Beneath the waves in 3D Aberdeen the potential of heavy oil 8/9 Taking the legal lessons learned in the north Sea to a global audience 10 potential Exploiting heavy oil reserves Aberdeen: A community of science AT WORK FOR THE ENERGY SECTOR ISSUE

Levi, Ran

259

Utah Heavy Oil Program  

SciTech Connect (OSTI)

The Utah Heavy Oil Program (UHOP) was established in June 2006 to provide multidisciplinary research support to federal and state constituents for addressing the wide-ranging issues surrounding the creation of an industry for unconventional oil production in the United States. Additionally, UHOP was to serve as an on-going source of unbiased information to the nation surrounding technical, economic, legal and environmental aspects of developing heavy oil, oil sands, and oil shale resources. UHOP fulGilled its role by completing three tasks. First, in response to the Energy Policy Act of 2005 Section 369(p), UHOP published an update report to the 1987 technical and economic assessment of domestic heavy oil resources that was prepared by the Interstate Oil and Gas Compact Commission. The UHOP report, entitled 'A Technical, Economic, and Legal Assessment of North American Heavy Oil, Oil Sands, and Oil Shale Resources' was published in electronic and hard copy form in October 2007. Second, UHOP developed of a comprehensive, publicly accessible online repository of unconventional oil resources in North America based on the DSpace software platform. An interactive map was also developed as a source of geospatial information and as a means to interact with the repository from a geospatial setting. All documents uploaded to the repository are fully searchable by author, title, and keywords. Third, UHOP sponsored Give research projects related to unconventional fuels development. Two projects looked at issues associated with oil shale production, including oil shale pyrolysis kinetics, resource heterogeneity, and reservoir simulation. One project evaluated in situ production from Utah oil sands. Another project focused on water availability and produced water treatments. The last project considered commercial oil shale leasing from a policy, environmental, and economic perspective.

J. Bauman; S. Burian; M. Deo; E. Eddings; R. Gani; R. Goel; C.K. Huang; M. Hogue; R. Keiter; L. Li; J. Ruple; T. Ring; P. Rose; M. Skliar; P.J. Smith; J.P. Spinti; P. Tiwari; J. Wilkey; K. Uchitel

2009-10-20T23:59:59.000Z

260

Design and fabrication of a bending rotation fatigue test rig for in situ electrochemical analysis during fatigue testing of NiTi shape memory alloy wires  

Science Journals Connector (OSTI)

The current investigation proposes a novel method for simultaneous assessment of the electrochemical and structural fatigue properties of nickel-titanium shape memory alloy (NiTi SMA) wires. The design and layout of an in situ electrochemical cell in a custom-made bending rotation fatigue (BRF) test rig is presented. This newly designed test rig allows performing a wide spectrum of experiments for studying the influence of fatigue on corrosion and vice versa. This can be achieved by performing ex situ and/or in situ measurements. The versatility of the combined electrochemical/mechanical test rig is demonstrated by studying the electrochemical behavior of NiTi SMA wires in 0.9% NaCl electrolyte under load. The ex situ measurements allow addressing various issues for example the influence of pre-fatigue on the localized corrosion resistance or the influence of hydrogen on fatigue life. Ex situ experiments showed that a pre-fatigued wire is more susceptible to localized corrosion. The synergetic effect can be concluded from the polarization studies and specifically from an in situ study of the open circuit potential (OCP) transients which sensitively react to the elementary repassivation events related to the local failure of the oxide layer. It can also be used as an indicator for identifying the onset of the fatigue failure.

Jenni Kristin Zglinski; Matthias Frotscher

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Design and fabrication of a bending rotation fatigue test rig for in situ electrochemical analysis during fatigue testing of NiTi shape memory alloy wires  

SciTech Connect (OSTI)

The current investigation proposes a novel method for simultaneous assessment of the electrochemical and structural fatigue properties of nickel-titanium shape memory alloy (NiTi SMA) wires. The design and layout of an in situ electrochemical cell in a custom-made bending rotation fatigue (BRF) test rig is presented. This newly designed test rig allows performing a wide spectrum of experiments for studying the influence of fatigue on corrosion and vice versa. This can be achieved by performing ex situ and/or in situ measurements. The versatility of the combined electrochemical/mechanical test rig is demonstrated by studying the electrochemical behavior of NiTi SMA wires in 0.9% NaCl electrolyte under load. The ex situ measurements allow addressing various issues, for example, the influence of pre-fatigue on the localized corrosion resistance, or the influence of hydrogen on fatigue life. Ex situ experiments showed that a pre-fatigued wire is more susceptible to localized corrosion. The synergetic effect can be concluded from the polarization studies and specifically from an in situ study of the open circuit potential (OCP) transients, which sensitively react to the elementary repassivation events related to the local failure of the oxide layer. It can also be used as an indicator for identifying the onset of the fatigue failure.

Neelakantan, Lakshman [Ruhr-Universitaet Bochum, Institute for Materials, 44801 Bochum (Germany); Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras, 600 036 Chennai (India); Zglinski, Jenni Kristin; Eggeler, Gunther [Ruhr-Universitaet Bochum, Institute for Materials, 44801 Bochum (Germany); Frotscher, Matthias [Ruhr-Universitaet Bochum, Institute for Materials, 44801 Bochum (Germany); CORTRONIK GmbH, 18119 Rostock-Warnemuende (Germany)

2013-03-15T23:59:59.000Z

262

Manufacture of refrigeration oils  

SciTech Connect (OSTI)

Lubricating oils suitable for use in refrigeration equipment in admixture with fluorinated hydrocarbon refrigerants are produced by solvent extraction of naphthenic lubricating oil base stocks, cooling the resulting extract mixture, optionally with the addition of a solvent modifier, to form a secondary raffinate and a secondary extract, and recovering a dewaxed oil fraction of lowered pour point from the secondary raffinate as a refrigeration oil product. The process of the invention obviates the need for a separate dewaxing operation, such as dewaxing with urea, as conventionally employed for the production of refrigeration oils.

Chesluk, R.P.; Platte, H.J.; Sequeira, A.J.

1981-12-08T23:59:59.000Z

263

Weighted power counting and chiral dimensional regularization  

E-Print Network [OSTI]

We define a modified dimensional-regularization technique that overcomes several difficulties of the ordinary technique, and is specially designed to work efficiently in chiral and parity violating quantum field theories, in arbitrary dimensions greater than 2. When the dimension of spacetime is continued to complex values, spinors, vectors and tensors keep the components they have in the physical dimension, therefore the gamma matrices are the standard ones. Propagators are regularized with the help of evanescent higher-derivative kinetic terms, which are of Majorana type in the case of chiral fermions. If the new terms are organized in a clever way, weighted power counting provides an efficient control on the renormalization of the theory, and allows us to show that the resulting chiral dimensional regularization is consistent to all orders. The new technique considerably simplifies the proofs of properties that hold to all orders, and makes them suitable to be generalized to wider classes of models. Typica...

Anselmi, Damiano

2014-01-01T23:59:59.000Z

264

Number Counts and Dynamical Vacuum Cosmologies  

E-Print Network [OSTI]

We study non-linear structure formation in an interacting model of the dark sector of the Universe in which the dark energy density decays linearly with the Hubble parameter, $\\rho_{\\Lambda} \\propto H$, leading to a constant-rate creation of cold dark matter. We derive all relevant expressions to calculate the mass function and the cluster number density using the Sheth-Torman formalism and show that the effect of the interaction process is to increase the number of bound structures of large masses ($M \\gtrsim 10^{14} M_{\\odot}h^{-1}$) when compared to the standard $\\Lambda$CDM model. Since these models are not reducible to each other, this number counts signature can in principle be tested in future surveys.

N. Chandrachani Devi; H. A. Borges; S. Carneiro; J. S. Alcaniz

2014-07-07T23:59:59.000Z

265

Number Counts and Dynamical Vacuum Cosmologies  

E-Print Network [OSTI]

We study non-linear structure formation in an interacting model of the dark sector of the Universe in which the dark energy density decays linearly with the Hubble parameter, $\\rho_{\\Lambda} \\propto H$, leading to a constant-rate creation of cold dark matter. We derive all relevant expressions to calculate the mass function and the cluster number density using the Sheth-Torman formalism and show that the effect of the interaction process is to increase the number of bound structures of large masses ($M \\gtrsim 10^{14} M_{\\odot}h^{-1}$) when compared to the standard $\\Lambda$CDM model. Since these models are not reducible to each other, this number counts signature can in principle be tested in future surveys.

Devi, N Chandrachani; Carneiro, S; Alcaniz, J S

2014-01-01T23:59:59.000Z

266

Carcinogenicity Studies of Estonian Oil Shale Soots  

E-Print Network [OSTI]

determine the carcinogenicity of Estonian oil shale soot as well as the soot from oil shale fuel oil. All

A. Vosamae

267

Estimation and specification tests of count data recreation demand functions  

E-Print Network [OSTI]

in the truncated and untruncated Poisson models, suggesting that the negative binomial family of distributions are more appropriate models. The results also demonstrate that using the seemingly unrelated Poisson regression estimator with event count data instead...- parameter distribution with mean and variance of Yi equal to Xt. This distribution can be extended to a count regression model by letting the expected count, E(Y; ) =? X&, to vary according to (II. 2) 4 = exp(q'P), where x; and P are, respectively...

Gomez, Irma Adriana

1991-01-01T23:59:59.000Z

268

Absolute nuclear material assay using count distribution (LAMBDA) space  

DOE Patents [OSTI]

A method of absolute nuclear material assay of an unknown source comprising counting neutrons from the unknown source and providing an absolute nuclear material assay utilizing a model to optimally compare to the measured count distributions. In one embodiment, the step of providing an absolute nuclear material assay comprises utilizing a random sampling of analytically computed fission chain distributions to generate a continuous time-evolving sequence of event-counts by spreading the fission chain distribution in time.

Prasad, Manoj K. (Pleasanton, CA); Snyderman, Neal J. (Berkeley, CA); Rowland, Mark S. (Alamo, CA)

2012-06-05T23:59:59.000Z

269

Crude Oil, Heating Oil, and Propane Market Outlook  

Gasoline and Diesel Fuel Update (EIA)

Oil, Heating Oil, and Propane Market Outlook Oil, Heating Oil, and Propane Market Outlook 8/13/01 Click here to start Table of Contents Crude Oil, Heating Oil, and Propane Market Outlook Short-Term World Oil Price Forecast Price Movements Related to Supply/Demand Balance OPEC Production Likely To Remain Low U.S. Reflects World Market Crude Oil Outlook Conclusions Distillate Prices Increase With Crude Oil Distillate Stocks on the East Coast Were Very Low Entering Last Winter Distillate Demand Strong Last Winter More Supply Possible This Fall than Forecast Distillate Fuel Oil Imports Could Be Available - For A Price Distillate Supply/Demand Balance Reflected in Spreads Distillate Stocks Expected to Remain Low Winter Crude Oil and Distillate Price Outlook Heating Oil Outlook Conclusion Propane Prices Follow Crude Oil

270

Acoustic Method for Fish Counting and Fish Sizing in Tanks  

E-Print Network [OSTI]

Counting and Fish Sizing in Tanks W.A. Kuperman and Philippedistributed among its 97 tanks to maximize feed-conversionrequires inventory- ing tanks regularly. Currently, this is

Kuperman, William A.; Roux, Philippe

2004-01-01T23:59:59.000Z

271

Acoustic Method for Fish Counting and Fish Sizing in Tanks  

E-Print Network [OSTI]

measurements in an echoic tank. ICES Journal of Marineto fish counting in a tank. Journal of the Acousticaland materials of the cylindrical tanks for the experiments.

Roux, Philippe; Conti, Stéphane; Demer, David; Maurer, Benjamin D.

2005-01-01T23:59:59.000Z

272

U.S. Energy Information Administration (EIA)  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

the 5-year average. The total rig count was 1,769, up 12 from a year ago.The natural gas rotary rig count totaled 335 as of February 28, which represents a decline of 7 rigs from...

273

Crude Oil Analysis Database  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

The composition and physical properties of crude oil vary widely from one reservoir to another within an oil field, as well as from one field or region to another. Although all oils consist of hydrocarbons and their derivatives, the proportions of various types of compounds differ greatly. This makes some oils more suitable than others for specific refining processes and uses. To take advantage of this diversity, one needs access to information in a large database of crude oil analyses. The Crude Oil Analysis Database (COADB) currently satisfies this need by offering 9,056 crude oil analyses. Of these, 8,500 are United States domestic oils. The database contains results of analysis of the general properties and chemical composition, as well as the field, formation, and geographic location of the crude oil sample. [Taken from the Introduction to COAMDATA_DESC.pdf, part of the zipped software and database file at http://www.netl.doe.gov/technologies/oil-gas/Software/database.html] Save the zipped file to your PC. When opened, it will contain PDF documents and a large Excel spreadsheet. It will also contain the database in Microsoft Access 2002.

Shay, Johanna Y.

274

Word Pro - S5  

U.S. Energy Information Administration (EIA) Indexed Site

Crude Oil and Natural Gas Resource Development Indicators Rotary Rigs in Operation by Type, 1949-2012 Rotary Rigs in Operation by Type, Monthly Active Well Service Rig Count, Monthly Total Wells Drilled by Type, 1949-2010 . 76 U.S. Energy Information Administration / Monthly Energy Review November 2013 Total 1950 1955 1960 1965 1970 1975 1980 1985 1990 1995 2000 2005 2010 0 1 2 3 4 Thousand Rigs 1950 1955 1960 1965 1970 1975 1980 1985 1990 1995 2000 2005 2010 0 10 20 30 40 50 Thousand Wells Dry Wells Crude Oil Wells Web Page: http://www.eia.gov/totalenergy/data/monthly/#crude. Sources: Tables 5.1 and 5.2. Crude Oil J FMAMJ J A SOND J FMAMJ J A SOND J FMAMJ J

275

World Oil: Market or Mayhem?  

E-Print Network [OSTI]

The world oil market is regarded by many as a puzzle. Why are oil prices so volatile? What is OPEC and what does OPEC do? Where are oil prices headed in the long run? Is “peak oil” a genuine concern? Why did oil prices ...

Smith, James L.

2008-01-01T23:59:59.000Z

276

Weighted power counting and chiral dimensional regularization  

E-Print Network [OSTI]

We define a modified dimensional-regularization technique that overcomes several difficulties of the ordinary technique, and is specially designed to work efficiently in chiral and parity violating quantum field theories, in arbitrary dimensions greater than 2. When the dimension of spacetime is continued to complex values, spinors, vectors and tensors keep the components they have in the physical dimension, therefore the $\\gamma $ matrices are the standard ones. Propagators are regularized with the help of evanescent higher-derivative kinetic terms, which are of the Majorana type in the case of chiral fermions. If the new terms are organized in a clever way, weighted power counting provides an efficient control on the renormalization of the theory, and allows us to show that the resulting chiral dimensional regularization is consistent to all orders. The new technique considerably simplifies the proofs of properties that hold to all orders, and makes them suitable to be generalized to wider classes of models. Typical examples are the renormalizability of chiral gauge theories and the Adler-Bardeen theorem. The difficulty of explicit computations, on the other hand, may increase.

Damiano Anselmi

2014-05-13T23:59:59.000Z

277

Vegetable oil fuel  

SciTech Connect (OSTI)

In this article, the future role of renewable agricultural resources in providing fuel is discussed. it was only during this century that U.S. farmers began to use petroleum as a fuel for tractors as opposed to forage crop as fuel for work animals. Now farmers may again turn to crops as fuel for agricultural production - the possible use of sunflower oil, soybean oil and rapeseed oil as substitutes for diesel fuel is discussed.

Bartholomew, D.

1981-04-01T23:59:59.000Z

278

US oil consumption, oil prices, and the macroeconomy  

Science Journals Connector (OSTI)

Since the oil price shock of 1973–74, researchers have waged ... national income. Studies examining the relationship between oil prices, oil consumption, and real output have produced remarkably ... to dramatical...

Ali F. Darrat; Otis W. Gilley; Don J. Meyer

1996-01-01T23:59:59.000Z

279

Lower oil prices also cutting winter heating oil and propane...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Lower oil prices also cutting winter heating oil and propane bills Lower oil prices are not only driving down gasoline costs, but U.S. consumers will also see a bigger savings in...

280

Effects of Oil and Oil Dispersants on the Marine Environment  

Science Journals Connector (OSTI)

13 April 1971 research-article Effects of Oil and Oil Dispersants on the Marine Environment R. G. J. Shelton In the context of marine pollution, the term 'oil' can cover a very wide range of substances and usually...

1971-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Enhanced Oil Recovery to Fuel Future Oil Demands | GE Global...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to Fuel Future Oil Demands Enhanced Oil Recovery to Fuel Future Oil Demands Trevor Kirsten 2013.10.02 I'm Trevor Kirsten and I lead a team of GE researchers that investigate a...

282

Oil and Gas (Indiana)  

Broader source: Energy.gov [DOE]

This division of the Indiana Department of Natural Resources provides information on the regulation of oil and gas exploration, wells and well spacings, drilling, plugging and abandonment, and...

283

Waste oil reduction: GKN  

SciTech Connect (OSTI)

This report details the steps required to establish a waste oil management program. Such a program can reduce operational costs, cut wastewater treatment costs and produce a better quality wastewater effluent through such means as: reducing the volume of oils used; segregating oils at the source of generation for recovery and reuse; and reducing the quality of oily wastewater generated. It discusses the metal-working fluid recovery options available for such a program, namely settling, filtration, hydrocyclone, and centrifugation. Included are source lists for vendors of oil skimmer equipment and coolant recovery systems.

Hunt, G.

1995-08-01T23:59:59.000Z

284

Understanding Crude Oil Prices  

E-Print Network [OSTI]

disruptions, and the peak in U.S. oil production account foroil increased 81.1% (logarithmically) between January 1979 and the peak

Hamilton, James Douglas

2008-01-01T23:59:59.000Z

285

What substitutes for oil?  

Science Journals Connector (OSTI)

... bagasse, ethyl alcohol, vegetable oils, methane and hydrogen; as well as hydro and nuclear power generation, conservation methods, and solar, wind and tidal energy.

David Spurgeon

1978-06-29T23:59:59.000Z

286

Crude Oil Prices  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Information AdministrationPetroleum Marketing Annual 2001 41 Table 21. Domestic Crude Oil First Purchase Prices (Dollars per Barrel) - Continued Year Month PAD District II...

287

Crude Oil Prices  

U.S. Energy Information Administration (EIA) Indexed Site

Information AdministrationPetroleum Marketing Annual 2002 41 Table 21. Domestic Crude Oil First Purchase Prices (Dollars per Barrel) - Continued Year Month PAD District II...

288

Crude Oil Prices  

Gasoline and Diesel Fuel Update (EIA)

Information AdministrationPetroleum Marketing Annual 2000 41 Table 21. Domestic Crude Oil First Purchase Prices (Dollars per Barrel) - Continued Year Month PAD District II...

289

Crude Oil Prices  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Information AdministrationPetroleum Marketing Annual 1999 41 Table 21. Domestic Crude Oil First Purchase Prices (Dollars per Barrel) - Continued Year Month PAD District II...

290

Crude Oil Prices  

U.S. Energy Information Administration (EIA) Indexed Site

Information AdministrationPetroleum Marketing Annual 1998 41 Table 21. Domestic Crude Oil First Purchase Prices (Dollars per Barrel) - Continued Year Month PAD District II...

291

NETL: Oil & Gas  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Oil & Gas Publications KMD Contacts Project Summaries EPAct 2005 Arctic Energy Office Announcements Software Stripper Wells Efficient recovery of our nation's fossil fuel resources...

292

MODELING COUNT DATA FROM MULTIPLE SENSORS: A BUILDING OCCUPANCY MODEL  

E-Print Network [OSTI]

MODELING COUNT DATA FROM MULTIPLE SENSORS: A BUILDING OCCUPANCY MODEL Jon Hutchins, Alexander Ihler a probabilistic model for predict- ing the occupancy of a building using networks of people-counting sensors-sensor probabilistic model for building occupancy. Inference for the oc- cupancy model follows in Section 4

Smyth, Padhraic

293

MODELING COUNT DATA FROM MULTIPLE SENSORS: A BUILDING OCCUPANCY MODEL  

E-Print Network [OSTI]

MODELING COUNT DATA FROM MULTIPLE SENSORS: A BUILDING OCCUPANCY MODEL Jon Hutchins, Alexander Ihler a probabilistic model for predict­ ing the occupancy of a building using networks of people­counting sensors­sensor probabilistic model for building occupancy. Inference for the oc­ cupancy model follows in Section 4

Ihler, Alexander

294

DSK: k-mer counting with very low memory usage  

Science Journals Connector (OSTI)

......k-mer counting with very low memory usage Guillaume Rizk 1 Dominique Lavenier 2 Rayan...function of the desired memory and disk usage. In Section 3, DSK is used to count all...sequences, k-mer length k, target memory usage M (bits), target disk space D (bits......

Guillaume Rizk; Dominique Lavenier; Rayan Chikhi

2013-03-01T23:59:59.000Z

295

Counting small RNA in disease-causing organisms  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Counting small RNA in disease-causing organisms Counting small RNA in disease-causing organisms Counting small RNA in disease-causing organisms Los Alamos researchers demonstrated improved technical methods capable of directly counting small RNA molecules in pathogenic (disease-causing) bacteria. June 17, 2013 Artist's concept of the fluorescence labeling and detection of small RNA in pathogenic bacteria. Artist's concept of the fluorescence labeling and detection of small RNA in pathogenic bacteria. The new technique reduced the number of false positives, which improved the accuracy of the count statistics, and it significantly reduced the image processing time. Small molecules of RNA (tens to hundreds of nucleotides in length) play a key regulatory role in bacteria. Due to their small size, directly

296

PIA - Northeast Home Heating Oil Reserve System (Heating Oil...  

Office of Environmental Management (EM)

Home Heating Oil Reserve System (Heating Oil) More Documents & Publications PIA - WEB Physical Security Major Application PIA - GovTrip (DOE data) PIA - WEB Unclassified...

297

Lead Corrosion and Oil Oxidation  

Science Journals Connector (OSTI)

... tests the horn was AISI 304, the balls were variously high purity Al, Cu, SAE 52100 steel, and Pb. The oil was a refined paraffinic mineral oil into which ... oil Bearing

J. K. APPELDOORN; P. PACOR; V. RIDDEI

1972-10-20T23:59:59.000Z

298

Oil shale technology  

SciTech Connect (OSTI)

Oil shale is undoubtedly an excellent energy source that has great abundance and world-wide distribution. Oil shale industries have seen ups and downs over more than 100 years, depending on the availability and price of conventional petroleum crudes. Market forces as well as environmental factors will greatly affect the interest in development of oil shale. Besides competing with conventional crude oil and natural gas, shale oil will have to compete favorably with coal-derived fuels for similar markets. Crude shale oil is obtained from oil shale by a relatively simple process called retorting. However, the process economics are greatly affected by the thermal efficiencies, the richness of shale, the mass transfer effectiveness, the conversion efficiency, the design of retort, the environmental post-treatment, etc. A great many process ideas and patents related to the oil shale pyrolysis have been developed; however, relatively few field and engineering data have been published. Due to the vast heterogeneity of oil shale and to the complexities of physicochemical process mechanisms, scientific or technological generalization of oil shale retorting is difficult to achieve. Dwindling supplied of worldwide petroleum reserves, as well as the unprecedented appetite of mankind for clean liquid fuel, has made the public concern for future energy market grow rapidly. the clean coal technology and the alternate fuel technology are currently of great significance not only to policy makers, but also to process and chemical researchers. In this book, efforts have been made to make a comprehensive text for the science and technology of oil shale utilization. Therefore, subjects dealing with the terminological definitions, geology and petrology, chemistry, characterization, process engineering, mathematical modeling, chemical reaction engineering, experimental methods, and statistical experimental design, etc. are covered in detail.

Lee, S. (Akron Univ., OH (United States). Dept. of Chemical Engineering)

1991-01-01T23:59:59.000Z

299

Oil Quantity : The histori  

E-Print Network [OSTI]

model for Prudhoe Bay. Figure 11: Historical Prudhoe Bay oil production data, modeled economically Production (million bbl per Month) Historical Production Best Fit (Hist. Tax w/ELF, Ref. P) High Price 120 140 160 19 Oil Quantity Con Wel N E A N N ng Results e Bay : The histori Bay over tim : Prudhoe Ba

Lin, C.-Y. Cynthia

300

The Geopolitics of Oil  

Science Journals Connector (OSTI)

...reduce their production by a similar...barrels ofoil a day. Although the...barrels of oil per day. It is likely...Virtually all the OPEC producers, particularly...their oil. In 1973, 90 percent...increase indigenous production, and ac-celerate...

1980-12-19T23:59:59.000Z

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Balancing oil and environment... responsibly.  

SciTech Connect (OSTI)

Balancing Oil and Environment…Responsibly As the price of oil continues to skyrocket and global oil production nears the brink, pursuing unconventional oil supplies, such as oil shale, oil sands, heavy oils, and oils from biomass and coal has become increasingly attractive. Of particular significance to the American way is that our continent has significant quantities of these resources. Tapping into these new resources, however, requires cutting-edge technologies for identification, production, processing and environmental management. This job needs a super hero or two for a job of this size and proportion…

Weimer, Walter C.; Teske, Lisa

2007-01-25T23:59:59.000Z

302

Essays on Macroeconomics and Oil  

E-Print Network [OSTI]

Oil Production in Venezuela and Mexico . . . . . . . . . .and Productivity in Venezuela and Mexico . . . . . . . . OilEllner, ”Organized Labor in Venezuela 1958-1991: Behavior

CAKIR, NIDA

2013-01-01T23:59:59.000Z

303

Chinaâs Oil Diplomacy with Russia.  

E-Print Network [OSTI]

??In Chinaâs view, it is necessary to get crude oil and oil pipeline. Under Russia and China strategic partnership, China tries to obtain âlong term… (more)

Chao, Jiun-chuan

2011-01-01T23:59:59.000Z

304

Peak oil: diverging discursive pipelines.  

E-Print Network [OSTI]

??Peak oil is the claimed moment in time when global oil production reaches its maximum rate and henceforth forever declines. It is highly controversial as… (more)

Doctor, Jeff

2012-01-01T23:59:59.000Z

305

The Captain Field, UK North Sea; appraisal and development of a viscous oil accumulation  

Science Journals Connector (OSTI)

...an electrical submersible pump (ESP...Wellhead Protection Platform (WPP), installed...year using a semi-submersible drilling rig...1995, using a semi-submersible drilling rig...Area A wellhead platform. The wells were...

S. J. Pinnock; A. R. J. Clitheroe

306

oil | OpenEI  

Open Energy Info (EERE)

oil oil Dataset Summary Description This dataset comes from the Energy Information Administration (EIA), and is part of the 2011 Annual Energy Outlook Report (AEO2011). This dataset is table 134, and contains only the reference case. The data is broken down into Crude oil, dry natural gas. Source EIA Date Released April 26th, 2011 (3 years ago) Date Updated Unknown Keywords 2011 AEO EIA end-of-year reserves gas oil Data application/vnd.ms-excel icon AEO2011: Oil and Gas End-of-Year Reserves and Annual Reserve Additions- Reference Case (xls, 58.4 KiB) Quality Metrics Level of Review Peer Reviewed Comment Temporal and Spatial Coverage Frequency Annually Time Period 2008-2035 License License Open Data Commons Public Domain Dedication and Licence (PDDL) Comment Rate this dataset

307

Chapter 5 - Crude Oil  

Science Journals Connector (OSTI)

Abstract Oil has been the number one source of energy in the world since the middle of the twentieth century. The world is very dependent on petroleum for transportation fuels, petrochemicals and asphalt. But ever increasing demand has caused the price of oil to spike in recent years, and only the world economic crisis has been able to temper demand and bring the price down to more reasonable levels. However, the demand and price are likely to shoot up again when the economy recovers. At the same time, the peak oil theory of M. King Hubbert predicts that world oil production is likely to peak soon. This prediction raises questions about what source of energy will come to the fore when oil is not able to keep up.

Brian F. Towler

2014-01-01T23:59:59.000Z

308

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

8 8 HOISTS 8-i This chapter provides safety standards for inspecting, testing, and operating hoists not permanently mounted on overhead cranes and implements the requirements of ASME B30.11 ("Monorail Systems and Underhung Cranes"), B30.16["Overhead Hoists (Underhung)"], and B30.21 ("Manually Lever Operated Hoists") (for latest ASME standards, see http://catalog.asme.org/home.cfm?Category=CS). 8.1 GENERAL .................................................................................................................................8-1 8.1.1 Operator Training/Qualification ..................................................................................8-4 8.1.2 Marking........................................................................................................................8-4

309

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

7 7 OVERHEAD AND GANTRY CRANES 7-i This chapter specifies operation, inspection, maintenance, and testing requirements for the use of overhead and gantry cranes and implements the requirements of ASME B30.2 ["Overhead and Gantry Cranes (Top- Running Bridge, Single or Multiple Girder, Top-Running Trolley Hoist)"], B30.11 ("Monorail Systems and Underhung Cranes"), and B30.17 ["Overhead and Gantry Cranes (Top-Running Bridge, Single Girder, Underhung Hoist")] (for latest ASME standards, see http://catalog.asme.org/home.cfm?Category=CS). 7.1 GENERAL .................................................................................................................................7-1 7.1.1 Operator Training/Qualification

310

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

CHAPTER 9 MOBILE CRANES 9-i This chapter specifies operation, inspection, maintenance, and testing requirements for the use of mobile cranes and implements the requirements of ASME B30.5 ("Mobile and Locomotive Cranes") (for latest ASME standards, see http://catalog.asme.org/home.cfm?Category=CS). 9.1 GENERAL .................................................................................................................................9-1 9.1.1 Operator Training/Qualification ..................................................................................9-1 9.1.2 Load Limits..................................................................................................................9-1 9.1.3 Load Rating Chart........................................................................................................9-1

311

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

4 4 LIFTING PERSONNEL 4-i Chapter 4 Lifting Personnel This chapter specifies the design and inspection requirements for personnel lift platforms as well as the operational requirements for such platforms and appurtenant hoisting equipment. It implements the requirements of ASME B30.23, Personnel Lifting Systems (for latest ASME standards, see http://catalog.asme.org/home.cfm?Category=CS). 4.1 GENERAL ................................................................................................................................4-1 4.1.1 Personnel Lifting Evaluation .......................................................................................4-1 4.1.2 Designated Leader .......................................................................................................4-1

312

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

Change Notice No. 1 DOE-STD-1090-2007 Change Notice No. 1 DOE-STD-1090-2007 December 2007 Chapter 4 Provide ASME attribution at introduction to the Table on Contents and on Figures 4-3,4 and Exhibits 1 & 2 Chapter 7 Provide ASME attribution at introduction to the Table on Contents and on Figures 7-1,2,3,4,5 and Table 7-1 Chapter 8 Provide ASME attribution at introduction to the Table on Contents and on Figures 8-1,2,3,4,5,6,7,8,9 and Table 8-1 Chapter 9 Provide ASME attribution at introduction to the Table on Contents and on Figures 9-1,2,3,4,5,6 and Table 9-2 Chapter 11 Provide ASME attribution at introduction to the Table on Contents and on Figures 11-10,15 and Tables 11-10,11,14,15,16 Chapter 12 Provide ASME attribution at introduction to the Table on Contents and on

313

Selected Abstracts & Bibliography of International Oil Spill Research, through 1998  

E-Print Network [OSTI]

Kuwait, Middle East, oil and gas fields, oil refinery, oil waste, oil well,Equipment Kuwait Oil Co. 1991. Mideast well fire, oil spillKuwait, Persian Gulf, Saudia Arabia, Oil spill, cleanup, oil spills, crude, oil spill incidents, oil spills-pipeline, warfare, oil skimmers, oil wells,

Louisiana Applied Oil Spill Research & Development Program Electronic Bibliography

1998-01-01T23:59:59.000Z

314

OpenEI - oil  

Open Energy Info (EERE)

/0 en AEO2011: Oil and Gas /0 en AEO2011: Oil and Gas End-of-Year Reserves and Annual Reserve Additions http://en.openei.org/datasets/node/805 This dataset comes from the Energy Information Administration (EIA), and is part of the 2011 Annual Energy Outlook Report (AEO2011). This dataset is table 134, and contains only the reference case. The data is broken down into Crude oil, dry natural gas. 

License
Type of License: 

315

When DNA Needs to Stand Up and Be Counted  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

When DNA Needs to Stand Up and Be Counted Print When DNA Needs to Stand Up and Be Counted Print DNA microarrays are small metal, glass, or silicon chips covered with patterns of short single-stranded DNA (ssDNA). These "DNA chips" are revolutionizing biotechnology, allowing scientists to identify and count many DNA sequences simultaneously. They are the enabling technology for genomic-based medicine and are a critical component of advanced diagnostic systems for medical and homeland security applications. Like digital chips, DNA chips are parallel, accurate, fast, and small. These advantages, however, can only be realized if the fragile biomolecules survive the attachment process intact. Furthermore, biomolecules must be properly oriented to perform their biological function. In other words, the DNA literally must stand up to be counted. Understanding both the attachment and orientation of DNA on gold surfaces was the goal of recent experiments performed at ALS Beamline 8.0.1 by an international collaboration of scientists.

316

When DNA Needs to Stand Up and Be Counted  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

When DNA Needs to Stand Up and Be Counted Print When DNA Needs to Stand Up and Be Counted Print DNA microarrays are small metal, glass, or silicon chips covered with patterns of short single-stranded DNA (ssDNA). These "DNA chips" are revolutionizing biotechnology, allowing scientists to identify and count many DNA sequences simultaneously. They are the enabling technology for genomic-based medicine and are a critical component of advanced diagnostic systems for medical and homeland security applications. Like digital chips, DNA chips are parallel, accurate, fast, and small. These advantages, however, can only be realized if the fragile biomolecules survive the attachment process intact. Furthermore, biomolecules must be properly oriented to perform their biological function. In other words, the DNA literally must stand up to be counted. Understanding both the attachment and orientation of DNA on gold surfaces was the goal of recent experiments performed at ALS Beamline 8.0.1 by an international collaboration of scientists.

317

The Argonne low level14C counting system  

Science Journals Connector (OSTI)

A low level14CO2 counting system is described. This system was used to process several thousand CO2 samples derived from atmospheric collections at various altitudes. Special features include counter construction...

J. Gray; S. J. Rymas; L. D. Studebaker…

1988-10-01T23:59:59.000Z

318

Algorithmic issues in queueing systems and combinatorial counting problems  

E-Print Network [OSTI]

(cont.) However, these randomized algorithms can never provide proven upper or lower bounds on the number of objects they are counting, but can only give probabilistic estimates. We propose a set of deterministic algorithms ...

Katz-Rogozhnikov, Dmitriy A

2008-01-01T23:59:59.000Z

319

Correlated neutron counting for the 21st century  

SciTech Connect (OSTI)

Correlated neutron counting techniques, such as neutron coincidence and multiplicity counting, are widely employed at nuclear fuel cycle facilities for the accountancy of nuclear material such as plutonium. These techniques need to be improved and enhanced to meet the challenges of complex measurement items and future nuclear safeguards applications, for example; the non-destructive assay of spent nuclear fuel, high counting rate applications, small sample measurements, and Helium-3 replacement. At the same time simulation tools, used for the design of detection systems based on these techniques, are being developed in anticipation of future needs. This seminar will present the theory and current state of the practice of temporally correlated neutron counting. A range of future safeguards applications will then be presented in the context of research projects at Los Alamos National Laboratory.

Evans, Louise G [Los Alamos National Laboratory

2010-12-01T23:59:59.000Z

320

Development of gas turbine combustor fed with bio-fuel oil  

SciTech Connect (OSTI)

Considering the increasing interest in the utilization of biofuels derived from biomass pyrolysis, ENEL/CRT carried out some experimental investigations on feasibility of biofuels utilization in the electricity production systems. The paper considers the experimental activity for the development and the design optimization of a gas turbine combustor suitable to be fed with biofuel oil, on the basis of the pressurized combustion performance obtained in a small gas turbine combustor fed with bio-fuel oil and ethanol/bio-fuel oil mixtures. Combustion tests were performed using the combustion chamber of a 40 kWe gas turbine. A small pressurized rig has been constructed including a nozzle for pressurization and a heat recovering combustion air preheating system, together with a proper injection system consisting of two dual fuel atomizers. Compressed air allowed a good spray quality and a satisfactory flame instability, without the need of a pilot frame, also when firing crude bio-fuel only. A parametric investigation on the combustion performance has been performed in order to evaluate the effect of fuel properties, operating conditions and injection system geometry, especially as regards CO and NO{sub x} emissions and smoke index.

Ardy, P.L.; Barbucci, P.; Benelli, G. [ENEL SpA R& D Dept., Pisa (Italy)] [and others

1995-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

HS_Oil_Studyguide.indd  

Broader source: Energy.gov (indexed) [DOE]

Oil Oil Fossil Energy Study Guide: Oil Pet roleum-or cr ude oil-is a fossil fuel that is found in large quantities beneath the Earth's sur face and is often used as a fuel or raw material in the chemical indust r y. It is a smelly, yellow-to-black liquid and is usually found in underg round areas called reser voirs. If you could look down an oil well and see oil where Nature created it, you might be surprised. You wouldn't see a big underground lake, as a lot of people think. Oil doesn't exist in deep, black pools. In fact, an underground oil formation-an "oil reservoir"-looks very much like any other rock formation. Oil exists in this underground formation as tiny droplets trapped inside the open spaces, called "pores," inside rocks. Th

322

MS_Oil_Studyguide.indd  

Broader source: Energy.gov (indexed) [DOE]

LOOKING DOWN AN OIL WELL LOOKING DOWN AN OIL WELL Ever wonder what oil looks like underground, down deep, hundreds or thousands of feet below the surface, buried under millions of tons of rock and dirt? If you could look down an oil well and see oil where nature created it, you might be surprised. You wouldn't see a big underground lake, as a lot of people think. Oil doesn't exist in deep, black pools. In fact, an underground oil formation-called an "oil reservoir" -looks very much like any other rock formation. It looks a lot like...well, rock. Oil exists underground as tiny droplets trapped inside the open spaces, called "pores," inside rocks. Th e "pores" and the oil droplets can be seen only through a microscope. Th e droplets cling to the rock, like drops of water cling

323

Oil and Gas Supply Module  

U.S. Energy Information Administration (EIA) Indexed Site

Oil and Gas Supply Module Oil and Gas Supply Module This page inTenTionally lefT blank 119 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2013 Oil and Gas Supply Module The NEMS Oil and Gas Supply Module (OGSM) constitutes a comprehensive framework with which to analyze crude oil and natural gas exploration and development on a regional basis (Figure 8). The OGSM is organized into 4 submodules: Onshore Lower 48 Oil and Gas Supply Submodule, Offshore Oil and Gas Supply Submodule, Oil Shale Supply Submodule[1], and Alaska Oil and Gas Supply Submodule. A detailed description of the OGSM is provided in the EIA publication, Model Documentation Report: The Oil and Gas Supply Module (OGSM), DOE/EIA-M063(2011), (Washington, DC, 2011). The OGSM provides

324

U. S. Energy Information Administration | Drilling Productivity Report  

U.S. Energy Information Administration (EIA) Indexed Site

1,600 1,600 2007 2008 2009 2010 2011 2012 2013 2014 Oil production thousand barrels/day Permian 0 10 20 30 Dec 1,335 Mbbl/d Production from new wells Legacy production change Net change Jan 1,335 Mbbl/d thousand barrels/day Permian +37 -36 +1 Indicated change in oil production (Jan vs. Dec) 0 20 40 60 80 Dec 5,046 MMcf/d Production from new wells Legacy production change Net change Jan 5,046 MMcf/d Indicated change in natural gas production (Jan vs. Dec) million cubic feet/day Permian +88 -88 +0 0 100 200 300 400 500 600 0 100 200 300 400 500 600 2007 2008 2009 2010 2011 2012 2013 2014 new-well oil production per rig rig count New-well oil production per rig barrels/day Permian Rig count rigs (40) (35) (30) (25) (20) (15) (10) (5) 0 2007 2008 2009 2010 2011 2012 2013 2014 Legacy oil production change thousand barrels/day

325

U. S. Energy Information Administration | Drilling Productivity Report  

U.S. Energy Information Administration (EIA) Indexed Site

barrels/day barrels/day 0 400 800 1,200 1,600 2,000 2007 2008 2009 2010 2011 2012 2013 2014 Oil production thousand barrels/day Haynesville 0.0 0.5 1.0 1.5 2.0 Dec 54 Mbbl/d Production from new wells Legacy production change Net change Jan 54 Mbbl/d thousand barrels/day Haynesville +2 -2 +0 Indicated change in oil production (Jan vs. Dec) -150 -50 50 150 250 350 Dec 6,492 MMcf/d Production from new wells Legacy production change Net change Jan 6,361 MMcf/d Indicated change in natural gas production (Jan vs. Dec) million cubic feet/day Haynesville +239 -370 -131 0 50 100 150 200 250 300 0 200 400 600 800 1,000 2007 2008 2009 2010 2011 2012 2013 2014 new-well oil production per rig rig count New-well oil production per rig barrels/day Haynesville Rig count rigs (3) (2) (1) 0 2007 2008 2009 2010 2011 2012 2013 2014 Legacy oil production change

326

U. S. Energy Information Administration | Drilling Productivity Report  

U.S. Energy Information Administration (EIA) Indexed Site

Marcellus Marcellus 0 400 800 1,200 1,600 2,000 2007 2008 2009 2010 2011 2012 2013 2014 Oil production thousand barrels/day Marcellus 0.0 1.0 2.0 3.0 4.0 Dec 39 Mbbl/d Production from new wells Legacy production change Net change Jan 41 Mbbl/d thousand barrels/day Marcellus +4 -2 +2 Indicated change in oil production (Jan vs. Dec) 0 200 400 600 Dec 13,303 MMcf/d Production from new wells Legacy production change Net change Jan 13,721 MMcf/d Indicated change in natural gas production (Jan vs. Dec) million cubic feet/day Marcellus +612 -193 +419 0 20 40 60 80 100 120 140 160 0 200 400 600 800 1,000 2007 2008 2009 2010 2011 2012 2013 2014 new-well oil production per rig rig count New-well oil production per rig barrels/day Marcellus Rig count rigs (3) (2) (1) 0 2007 2008 2009 2010 2011 2012 2013 2014 Legacy oil production change

327

Oil Price Volatility  

U.S. Energy Information Administration (EIA) Indexed Site

Speculation and Oil Price Volatility Speculation and Oil Price Volatility Robert J. Weiner Robert J. Weiner Professor of International Business, Public Policy & Professor of International Business, Public Policy & Public Administration, and International Affairs Public Administration, and International Affairs George Washington University; George Washington University; Membre Associ Membre Associ é é , GREEN, Universit , GREEN, Universit é é Laval Laval EIA Annual Conference Washington Washington 7 April 2009 7 April 2009 1 FACTORS DRIVNG OIL PRICE VOLATILITY FACTORS DRIVNG OIL PRICE VOLATILITY ► ► Market fundamentals Market fundamentals . . Fluctuations in supply, Fluctuations in supply, demand, and market power demand, and market power Some fundamentals related to expectations of Some fundamentals related to expectations of

328

Winter Crude Oil and  

Gasoline and Diesel Fuel Update (EIA)

4 4 Notes: While the relatively low stock forecast (although not as low as last winter) adds some extra pressure to prices, the price of crude oil could be the major factor affecting heating oil prices this winter. The current EIA forecast shows residential prices averaging $1.29 this winter, assuming no volatility. The average retail price is about 7 cents less than last winter, but last winter included the price spike in November 2000, December 2000, and January 2001. Underlying crude oil prices are currently expected to be at or below those seen last winter. WTI averaged over $30 per barrel last winter, and is currently forecast to average about $27.50 per barrel this winter. As those of you who watch the markets know, there is tremendous uncertainty in the amount of crude oil supply that will be available this winter. Less

329

Oil Market Assessment  

Gasoline and Diesel Fuel Update (EIA)

Logo Oil Market Assessment - September Logo Oil Market Assessment - September 12, 2001 EIA Home Page Based on Energy Information Administration (EIA) contacts and trade press reports, overall U.S. and global oil supplies appear to have been minimally impacted by yesterday's terrorist attacks on the World Trade Center and the Pentagon. Rumors of scattered closures of U.S. refineries, pipelines, and terminals were reported, and Louisiana Offshore Oil Port operations were partially suspended. While the NYMEX and New York Harbor were temporarily closed, operations are expected to resume soon. Most, if not all petroleum industry infrastructure is expected to resume normal operations today or in the very near term. Prices at all levels (where markets were open) posted increases yesterday, but many prices fell today, as initial reactions

330

Residential Heating Oil Prices  

Gasoline and Diesel Fuel Update (EIA)

This chart highlights residential heating oil prices for the current and This chart highlights residential heating oil prices for the current and past heating season. As you can see, prices have started the heating season, about 40 to 50 cents per gallon higher than last year at this time. The data presented are from EIA's State Heating Oil and Propane Program. We normally collect and publish this data twice a month, but given the low stocks and high prices, we started tracking the prices weekly. These data will also be used to determine the price trigger mechanism for the Northeast Heating Oil Reserve. The data are published at a State and regional level on our web site. The slide is to give you some perspective of what is happening in these markets, since you probably will get a number of calls from local residents about their heating fuels bills

331

India: Becoming well oiled  

Science Journals Connector (OSTI)

... been stirred into vigorous action and its redoubled efforts to find more oil onshore and offshore are beginning to yield results. From onshore fields in Assam and Gujarat, production this ... figure will go up to 11 million tonnes.

Correspondent

1976-04-01T23:59:59.000Z

332

Production of Shale Oil  

E-Print Network [OSTI]

Intensive pre-project feasibility and engineering studies begun in 1979 have produced an outline plan for development of a major project for production of shale oil from private lands in the Piceance Basin in western Colorado. This outline plan...

Loper, R. D.

1982-01-01T23:59:59.000Z

333

Steadying of oil prices  

Science Journals Connector (OSTI)

Oil prices have fallen below the 30 dollar mark ... in the lower half of OPEC’s target price band. Will OPEC manage to maintain high prices and revenues by restricting production?

Klaus Matthies

334

Imbibition assisted oil recovery  

E-Print Network [OSTI]

analyzed in detail to investigate oil recovery during spontaneous imbibition with different types of boundary conditions. The results of these studies have been upscaled to the field dimensions. The validity of the new definition of characteristic length...

Pashayev, Orkhan H.

2004-11-15T23:59:59.000Z

335

Sound Oil Company  

Broader source: Energy.gov (indexed) [DOE]

Sound Oil Company Sound Oil Company file:///C|/Documents%20and%20Settings/blackard/Desktop/EIA/LEE0152.HTM[11/29/2012 2:30:44 PM] DECISION AND ORDER OF THE DEPARTMENT OF ENERGY Application for Exception Name of Petitioner: Sound Oil Company Date of Filing: August 16, 1994 Case Number: LEE-0152 On August 16, 1994, Sound Oil Company (Sound) of Seattle Washington, filed an Application for Exception with the Office of Hearings and Appeals of the Department of Energy. In its Application, Sound requests that it be relieved of the requirement that it file the Energy Information Administration's (EIA) form entitled "Resellers'/Retailers' Monthly Petroleum Product Sales Report" (Form EIA-782B). As explained below, we have determined that the Application for Exception should be denied.

336

Oil Reserves and Production  

Science Journals Connector (OSTI)

...research-article Oil Reserves and Production Eric Drake The growth of world energy requirements over the last...remaining proved recoverable reserves will probably decline continuously...to grow. The declining reserves will be insufficient to...

1974-01-01T23:59:59.000Z

337

Crude Oil Prices  

Gasoline and Diesel Fuel Update (EIA)

20.86 20.67 20.47 20.24 20.32 19.57 See footnotes at end of table. 21. Domestic Crude Oil First Purchase Prices Energy Information Administration Petroleum Marketing Annual...

338

Crude Oil Prices  

Gasoline and Diesel Fuel Update (EIA)

19.11 18.73 18.63 17.97 18.75 18.10 See footnotes at end of table. 21. Domestic Crude Oil First Purchase Prices Energy Information Administration Petroleum Marketing Annual...

339

Oil shale research in China  

SciTech Connect (OSTI)

There have been continued efforts and new emergence in oil shale research in Chine since 1980. In this paper, the studies carried out in universities, academic, research and industrial laboratories in recent years are summarized. The research areas cover the chemical structure of kerogen; thermal behavior of oil shale; drying, pyrolysis and combustion of oil shale; shale oil upgrading; chemical utilization of oil shale; retorting waste water treatment and economic assessment.

Jianqiu, W.; Jialin, Q. (Beijing Graduate School, Petroleum Univ., Beijing (CN))

1989-01-01T23:59:59.000Z

340

Biocatalysis in Oil Refining  

SciTech Connect (OSTI)

Biocatalysis in Oil Refining focuses on petroleum refining bioprocesses, establishing a connection between science and technology. The micro organisms and biomolecules examined for biocatalytic purposes for oil refining processes are thoroughly detailed. Terminology used by biologists, chemists and engineers is brought into a common language, aiding the understanding of complex biological-chemical-engineering issues. Problems to be addressed by the future R&D activities and by new technologies are described and summarized in the last chapter.

Borole, Abhijeet P [ORNL; Ramirez-Corredores, M. M. [BP Global Fuels Technology

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Oil spill response resources  

E-Print Network [OSTI]

from Marathon Oil Company for their encouragement and support. Last, but not least, I would like to thank Lynette Schlandt for her help during my stay at this University. vu TABLE OF CONTENTS Page ABSTRACT. . . . . nl DEDICATION... tool for control. The State of Texas passed and implemented OSPRA (Oil Spill Prevention and Response Act) of 1991. The most significant requirement for both these laws was the need for a Facility Response Plan for the companies. This would help a...

Muthukrishnan, Shankar

2012-06-07T23:59:59.000Z

342

Oil/gas collector/separator for underwater oil leaks  

DOE Patents [OSTI]

An oil/gas collector/separator for recovery of oil leaking, for example, from an offshore or underwater oil well. The separator is floated over the point of the leak and tethered in place so as to receive oil/gas floating, or forced under pressure, toward the water surface from either a broken or leaking oil well casing, line, or sunken ship. The separator is provided with a downwardly extending skirt to contain the oil/gas which floats or is forced upward into a dome wherein the gas is separated from the oil/water, with the gas being flared (burned) at the top of the dome, and the oil is separated from water and pumped to a point of use. Since the density of oil is less than that of water it can be easily separated from any water entering the dome.

Henning, Carl D. (Livermore, CA)

1993-01-01T23:59:59.000Z

343

Optimising the Use of Spent Oil Shale.  

E-Print Network [OSTI]

??Worldwide deposits of oil shales are thought to represent ~3 trillion barrels of oil. Jordanian oil shale deposits are extensive and high quality, and could… (more)

FOSTER, HELEN,JANE

2014-01-01T23:59:59.000Z

344

WASTEWATER TREATMENT IN THE OIL SHALE INDUSTRY  

E-Print Network [OSTI]

during oil shale retorting: retort water and gas condensate.commercial oil shale plant, retort water and gas condensateunique to an oil shale retort water, gas condensate, and

Fox, J.P.

2010-01-01T23:59:59.000Z

345

Enhanced Oil Recovery | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Enhanced Oil Recovery Enhanced Oil Recovery Cross-section illustrating how carbon dioxide and water can be used to flush residual oil from a subsurface rock formation between...

346

Oil Prices and Long-Run Risk.  

E-Print Network [OSTI]

??I show that relative levels of aggregate consumption and personal oil consumption provide anexcellent proxy for oil prices, and that high oil prices predict low… (more)

READY, ROBERT

2011-01-01T23:59:59.000Z

347

heavy_oil | netl.doe.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Heavy Oil Publications KMD Contacts Project Summaries EPAct 2005 Arctic Energy Office Announcements Software Stripper Wells Heavy oil is a vast U.S. oil resource that is...

348

Deepwater Oil & Gas Resources | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Deepwater Oil & Gas Resources Deepwater Oil & Gas Resources The United States has significant natural gas and oil reserves. But many of these resources are increasingly harder to...

349

Oil and Gas Supply Module  

Gasoline and Diesel Fuel Update (EIA)

1 1 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2012 Oil and Gas Supply Module The NEMS Oil and Gas Supply Module (OGSM) constitutes a comprehensive framework with which to analyze crude oil and natural gas exploration and development on a regional basis (Figure 8). The OGSM is organized into 4 submodules: Onshore Lower 48 Oil and Gas Supply Submodule, Offshore Oil and Gas Supply Submodule, Oil Shale Supply Submodule[1], and Alaska Oil and Gas Supply Submodule. A detailed description of the OGSM is provided in the EIA publication, Model Documentation Report: The Oil and Gas Supply Module (OGSM), DOE/EIA-M063(2011), (Washington, DC, 2011). The OGSM provides crude oil and natural gas short-term supply parameters to both the Natural Gas Transmission and Distribution Module and the Petroleum

350

Economic effects of peak oil  

Science Journals Connector (OSTI)

Assuming that global oil production peaked, this paper uses scenario analysis to show the economic effects of a possible supply shortage and corresponding rise in oil prices in the next decade on different sectors in Germany and other major economies such as the US, Japan, China, the OPEC or Russia. Due to the price-inelasticity of oil demand the supply shortage leads to a sharp increase in oil prices in the second scenario, with high effects on GDP comparable to the magnitude of the global financial crises in 2008/09. Oil exporting countries benefit from high oil prices, whereas oil importing countries are negatively affected. Generally, the effects in the third scenario are significantly smaller than in the second, showing that energy efficiency measures and the switch to renewable energy sources decreases the countries' dependence on oil imports and hence reduces their vulnerability to oil price shocks on the world market.

Christian Lutz; Ulrike Lehr; Kirsten S. Wiebe

2012-01-01T23:59:59.000Z

351

Compensated count-rate circuit for radiation survey meter  

DOE Patents [OSTI]

A count-rate compensating circuit is provided which may be used in a portable Geiger-Mueller (G-M) survey meter to ideally compensate for counting loss errors in the G-M tube detector. In a G-M survey meter, wherein the pulse rate from the G-M tube is converted into a pulse rate current applied to a current meter calibrated to indicate dose rate, the compensated circuit generates and controls a reference voltage in response to the rate of pulses from the detector. This reference voltage is gated to the current-generating circuit at a rate identical to the rate of pulses coming from the detector so that the current flowing through the meter is varied in accordance with both the frequency and amplitude of the reference voltage pulses applied thereto so that the count rate is compensated ideally to indicate a true count rate within 1% up to a 50% duty cycle for the detector. A positive feedback circuit is used to control the reference voltage so that the meter output tracks true count rate indicative of the radiation dose rate.

Todd, Richard A. (Powell, TN)

1981-01-01T23:59:59.000Z

352

Abandoned oil fields in Oklahoma  

SciTech Connect (OSTI)

Data are presented for approximately 165 abandoned oil fields in Oklahoma that have produced 10,000 or more barrels of oil prior to abandonment. The following information is provided for each field: county; DOE field code; field name; AAPG geologic province code; discovery date of field; year of last production, if known; discovery well operator; proven acreage; formation thickness; depth of field; gravity of oil production; calendar year; yearly field oil production; yearly field gas production; cumulative oil production; cumulative gas production; number abandoned fields in county; cumulative production of oil from fields; and cumulative production of gas from fields. (ATT)

Chism, J.

1983-08-01T23:59:59.000Z

353

Used oil re-refining  

SciTech Connect (OSTI)

Used oils, especially used lubricating oils which are normally considered waste and are discarded or burned, are reclaimed for reuse by a re-refining procedure involving the steps of: heat soaking the used oil; distilling the heat soaked oil; passing the distillate through a guard bed of activated material; hydrotreating the guard bed treated distillate under standard hydrotreating conditions. If the used oil to be re-refined contains a quantity of water and/or fuel fraction which the practioner considers sufficiently large to be detrimental, the used oil may be subjected to a dewatering/defueling step prior to being heat soaked.

Reid, L. E.; Ryan, D. G.; Yao, K. C.

1985-04-23T23:59:59.000Z

354

MECS Fuel Oil Tables  

U.S. Energy Information Administration (EIA) Indexed Site

: Actual, Minimum and Maximum Use Values for Fuel Oils and Natural Gas : Actual, Minimum and Maximum Use Values for Fuel Oils and Natural Gas Year Distillate Fuel Oil (TBtu) Actual Minimum Maximum Discretionary Rate 1985 185 148 1224 3.4% 1994 152 125 1020 3.1% Residual Fuel Oil (TBtu) Actual Minimum Maximum Discretionary Rate 1985 505 290 1577 16.7% 1994 441 241 1249 19.8% Natural Gas (TBtu) Actual Minimum Maximum Discretionary Rate 1985 4656 2702 5233 77.2% 1994 6141 4435 6758 73.4% Source: Energy Information Administration, Office of Energy Markets and End Use, 1985 and 1994 Manufacturing Energy Consumption Surveys. Table 2: Establishments That Actually Switched Between Natural Gas and Residual Fuel Oil Type of Switch Number of Establishments in Population Number That Use Original Fuel Percentage That Use Original Fuel Number That Can Switch to Another Fuel Percentage That Can Switch to Another Fuel Number That Actually Made a Switch Percentage That Actually Made a Switch

355

Enhanced Oil Recovery and Other Oil Resources projects  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Enhanced Oil Recovery and Other Oil Resources Enhanced Oil Recovery and Other Oil Resources Enhanced Oil Recovery and Other Oil Resources CO2 EOR | Other EOR & Oil Resources | Environmental | Completed Oil Projects Project Number Project Name Primary Performer DE-FE0013723 Development of Nanoparticle-Stabilized Foams To Improve Performance of Water-less Hydraulic Fracturing The University of Texas at Austin DE-FE0010799 Small Molecular Associative Carbon Dioxide (CO2) Thickeners for Improved Mobility Control University of Pittsburgh DE-FE0006011 Development of Real Time Semi-autonomous Geophysical Data Acquisition and Processing System to Monitor Flood Performance White River Technologies DE-FE0005979 Nanoparticle-stabilized CO2 Foam for CO2 EOR Application New Mexico Institute of Mining and Technology

356

Oil Prices, Opec and the Poor Oil Consuming Countries  

Science Journals Connector (OSTI)

In 1950, the year O.P.E.C. (Organisation of Petroleum Exporting Countries) was formed, the world oil industry was dominated by a group of seven oligopolistic major international oil companies, who were collective...

Biplab Dasgupta

1976-01-01T23:59:59.000Z

357

2013 Feds Feed Families: Your Generosity Counts | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

2013 Feds Feed Families: Your Generosity Counts 2013 Feds Feed Families: Your Generosity Counts 2013 Feds Feed Families: Your Generosity Counts July 2, 2013 - 5:58pm Addthis (L to R) Kevin Knobloch, DOE Chief of Staff; Fletcher Honemond, Chief Learning Officer; Doug Keeler, Feds Feeds Families National Program Manager; Ella Daniels of the Capital Area Food Bank; Jennifer Hirschorn; Rauland Sharp, 2013 Feds Feeds Families Deputy Champion. | Photo courtesy of Ella Daniels. (L to R) Kevin Knobloch, DOE Chief of Staff; Fletcher Honemond, Chief Learning Officer; Doug Keeler, Feds Feeds Families National Program Manager; Ella Daniels of the Capital Area Food Bank; Jennifer Hirschorn; Rauland Sharp, 2013 Feds Feeds Families Deputy Champion. | Photo courtesy of Ella Daniels. Fletcher Honemond Fletcher Honemond

358

Two Million Smart Meters and Counting | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Million Smart Meters and Counting Million Smart Meters and Counting Two Million Smart Meters and Counting August 31, 2010 - 6:02pm Addthis Elizabeth Meckes Elizabeth Meckes Director of User Experience & Digital Technologies, Office of Public Affairs What does this mean for me? Smart meter technology will help families and businesses cut their energy costs by reducing response time for energy disruptions and enabling consumers to better monitor their consumption. The implementation of smart grid technologies could reduce electricity use by more than four percent annually by 2030 -- that would mean consumers around the country would see savings of over $20 billion each year. Secretary Steven Chu visited Battelle headquarters in Columbus, Ohio, today to make a big announcement about our nation's electrical grid: an

359

Happy Earth Day! 39 and Counting | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Day! 39 and Counting Day! 39 and Counting Happy Earth Day! 39 and Counting April 22, 2009 - 10:55am Addthis Drew Bittner Web Manager, Office of Energy Efficiency and Renewable Energy It was in 1970 that Sen. Gaylord Nelson of Wisconsin established "Earth Day" as a teaching opportunity for budding environmentalists. Seems like a long time ago-I was all of six years old and to me, "green" was something Kermit the Frog sang about being. We've come a long way since then. Earth Day is now a national celebration of environmentalism and conservation. A lot of what we in EERE do is directly supporting the ideals and aspirations of Earth Day, and you can see growing support from major corporations, media and academia. It's pretty exciting, and definitely an exciting time to be in the energy field.

360

2013 Feds Feed Families: Your Generosity Counts | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

013 Feds Feed Families: Your Generosity Counts 013 Feds Feed Families: Your Generosity Counts 2013 Feds Feed Families: Your Generosity Counts July 2, 2013 - 5:58pm Addthis (L to R) Kevin Knobloch, DOE Chief of Staff; Fletcher Honemond, Chief Learning Officer; Doug Keeler, Feds Feeds Families National Program Manager; Ella Daniels of the Capital Area Food Bank; Jennifer Hirschorn; Rauland Sharp, 2013 Feds Feeds Families Deputy Champion. | Photo courtesy of Ella Daniels. (L to R) Kevin Knobloch, DOE Chief of Staff; Fletcher Honemond, Chief Learning Officer; Doug Keeler, Feds Feeds Families National Program Manager; Ella Daniels of the Capital Area Food Bank; Jennifer Hirschorn; Rauland Sharp, 2013 Feds Feeds Families Deputy Champion. | Photo courtesy of Ella Daniels. Fletcher Honemond Fletcher Honemond

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Students Count -- From the Classroom to the Conference | Department of  

Broader source: Energy.gov (indexed) [DOE]

Students Count -- From the Classroom to the Conference Students Count -- From the Classroom to the Conference Students Count -- From the Classroom to the Conference January 18, 2012 - 5:42pm Addthis Secretary Chu and former Governor of California Arnold Schwarzenegger speak with students at the 2011 Energy Innovation Summit. | Photo courtesy of ARPA-E. Secretary Chu and former Governor of California Arnold Schwarzenegger speak with students at the 2011 Energy Innovation Summit. | Photo courtesy of ARPA-E. Alexa McClanahan Communications Support Contractor to ARPA-E "The Student Program is a unique opportunity for student energy club leaders throughout the nation to gather, share best practices, and engage with policy makers, entrepreneurs, scientists, and engineers..." Shannon Yee, Student Program Coordinator

362

U. S. Energy Information Administration | Drilling Productivity Report  

U.S. Energy Information Administration (EIA) Indexed Site

Bakken Bakken 0 50 100 Dec 1,000 Mbbl/d Production from new wells Legacy production change Net change Jan 1,025 Mbbl/d thousand barrels/day Bakken +88 -63 +25 Indicated change in oil production (Jan vs. Dec) 0 50 100 Dec 1,092 MMcf/d Production from new wells Legacy production change Net change Jan 1,119 MMcf/d Indicated change in natural gas production (Jan vs. Dec) million cubic feet/day Bakken +83 -55 +28 0 50 100 150 200 250 0 100 200 300 400 500 600 2007 2008 2009 2010 2011 2012 2013 2014 new-well oil production per rig rig count New-well oil production per rig barrels/day Bakken Rig count rigs (70) (60) (50) (40) (30) (20) (10) 0 2007 2008 2009 2010 2011 2012 2013 2014 Legacy oil production change thousand barrels/day Bakken (60) (50) (40) (30) (20) (10) 0 2007 2008 2009 2010 2011 2012 2013 2014 Legacy gas production change

363

Compare All CBECS Activities: Fuel Oil Use  

Gasoline and Diesel Fuel Update (EIA)

of fuel oil in 1999. Only six building types had any statistically significant fuel oil usage, with education buildings using the most total fuel oil. Figure showing total fuel oil...

364

Power-counting renormalizability of generalized Horava gravity  

E-Print Network [OSTI]

In an earlier article [arXiv:0902.0590 [hep-th], Phys. Rev D80 (2009) 025011], I discussed the potential benefits of allowing Lorentz symmetry breaking in quantum field theories. In particular I discussed the perturbative power-counting finiteness of the normal-ordered :P(phi)^{z>=d}_{d+1}: scalar quantum field theories, and sketched the implications for Horava's model of quantum gravity. In the current rather brief addendum, I will tidy up some dangling issues and fill out some of the technical details of the argument indicating the power-counting renormalizability of a z>=d variant of Horava gravity in (d+1) dimensions.

Matt Visser

2009-12-24T23:59:59.000Z

365

Used Oil and Filter Disposal Used Oil: Create a segregated storage area or container. Label the container "Waste Oil Only".  

E-Print Network [OSTI]

Used Oil and Filter Disposal Used Oil: Create a segregated storage area or container. Label the container "Waste Oil Only". Maintain a written log to document all amounts and types of oil added to the container. No solvents, oil contaminated with solvents, PCBs, non-petroleum based oils, or any other

Maroncelli, Mark

366

Spot-Oiling Johnsongrass.  

E-Print Network [OSTI]

I TEXAS AGRICULTURAL EXTENSIO-N SERVICE G. G. Gibson, Director, College Station, Texas [Blank Page in Original Bulletin] I the bast I ir used the low I . .. 1 the fol or mort , needed SPOT-OILING JOHNSONGRASS H. E. Rea, M. J. Norris..., and Fred C. Elliott* Texas A. & M. College System ~HNSONGRASS CAN BE killed to the i ground by the application of 1 / 3 teaspoonful of a herbicidal oil to the crown of each stem. Eradication of established Johnsongrass can be obtained in a single...

Elliott, Fred C.; Norris, M. J.; Rea, H. E.

1955-01-01T23:59:59.000Z

367

Regional Residential Heating Oil Prices  

Gasoline and Diesel Fuel Update (EIA)

One of the first places where consumers are feeling the impact of One of the first places where consumers are feeling the impact of this winter's market pressures is in home heating oil prices. This chart shows prices through February 28, the most recent EIA data available. The general level of heating oil prices each year is largely a function of crude oil prices, and the price range over the course of the heating season is typically about 10 cents per gallon. Exceptions occur in unusual circumstances, such as very cold weather, large changes in crude oil prices, or supply problems. Heating oil prices for East Coast consumers started this winter at just over $1 per gallon, but rising crude oil prices drove them up nearly 21 cents through mid-January. With the continuing upward pressure from crude oil markets, magnified by a regional shortfall of heating oil

368

Oil and Gas Conservation (Montana)  

Broader source: Energy.gov [DOE]

Parts 1 and 2 of this chapter contain a broad range of regulations pertaining to oil and gas conservation, including requirements for the regulation of oil and gas exploration and extraction by the...

369

Residential heating oil prices decrease  

U.S. Energy Information Administration (EIA) Indexed Site

heating oil prices decrease The average retail price for home heating oil fell 1.7 cents from a week ago to 4.02 per gallon. That's up 1.7 cents from a year ago, based on the...

370

Residential heating oil price decreases  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

heating oil price decreases The average retail price for home heating oil fell 7.8 cents from a week ago to 3.14 per gallon. That's down 81.1 cents from a year ago, based on the...

371

Residential heating oil price decreases  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

heating oil price decreases The average retail price for home heating oil fell 10.5 cents from a week ago to 3.22 per gallon. That's down 73.6 cents from a year ago, based on the...

372

Residential heating oil price decreases  

Gasoline and Diesel Fuel Update (EIA)

heating oil price decreases The average retail price for home heating oil fell 1.8 cents from a week ago to 2.82 per gallon. That's down 1.36 from a year ago, based on the...

373

Residential heating oil prices decline  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

heating oil price decreases The average retail price for home heating oil fell 2 cents from a week ago to 3.36 per gallon. That's down 52.5 cents from a year ago, based on the...

374

Residential heating oil prices increase  

U.S. Energy Information Administration (EIA) Indexed Site

heating oil prices increase The average retail price for home heating oil rose 3.9 cents last week to 3.96 per gallon. That's down 2.6 cents from a year ago, based on the...

375

Residential heating oil price decreases  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

05, 2014 Residential heating oil price decreases The average retail price for home heating oil fell 1.9 cents from a week ago to 3.43 per gallon. That's down 39 cents from a year...

376

Residential heating oil price decreases  

U.S. Energy Information Administration (EIA) Indexed Site

4 Residential heating oil price decreases The average retail price for home heating oil fell 1.6 cents from a week ago to 3.42 per gallon. That's down 39.5 cents from a year ago,...

377

Residential heating oil prices decrease  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

heating oil price decreases The average retail price for home heating oil fell 2.9 cents from a week ago to 3.45 per gallon. That's down 36.6 cents from a year ago, based on the...

378

Residential heating oil prices decline  

U.S. Energy Information Administration (EIA) Indexed Site

heating oil price decreases The average retail price for home heating oil fell 3.3 cents from a week ago to 3.38 per gallon. That's down 43.9 cents from a year ago, based on the...

379

Residential heating oil prices increase  

U.S. Energy Information Administration (EIA) Indexed Site

5, 2014 Residential heating oil prices increase The average retail price for home heating oil rose 6.5 cents from a week ago to 4.24 per gallon. That's up 14.9 cents from a year...

380

Residential heating oil price decreases  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

6, 2014 Residential heating oil price decreases The average retail price for home heating oil rose 1.6 cents from a week ago to 4.24 per gallon. That's up 8.9 cents from a year...

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Residential heating oil prices decline  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

heating oil price decreases The average retail price for home heating oil fell 6.3 cents from a week ago to 3.08 per gallon. That's down 90.3 cents from a year ago, based on the...

382

Residential heating oil price decreases  

U.S. Energy Information Administration (EIA) Indexed Site

heating oil price decreases The average retail price for home heating oil fell 3.8 cents from a week ago to 3.33 per gallon. That's down 59.1 cents from a year ago, based on the...

383

Residential heating oil prices increase  

U.S. Energy Information Administration (EIA) Indexed Site

heating oil prices increase The average retail price for home heating oil rose 5.4 cents from a week ago to 4.04 per gallon. That's up 4.9 cents from a year ago, based on the...

384

Residential heating oil prices increase  

U.S. Energy Information Administration (EIA) Indexed Site

heating oil prices increase The average retail price for home heating oil rose 2.9 cents from a week ago to 3.98 per gallon. That's up 6-tenths of a penny from a year ago, based...

385

Residential heating oil prices increase  

U.S. Energy Information Administration (EIA) Indexed Site

3, 2014 Residential heating oil prices increase The average retail price for home heating oil rose 4.4 cents from a week ago to 4.06 per gallon. That's up 4.1 cents from a year...

386

Residential heating oil prices decline  

U.S. Energy Information Administration (EIA) Indexed Site

heating oil prices decline The average retail price for home heating oil is 3.48 per gallon. That's down 4.5 cents from a week ago, based on the residential heating fuel survey by...

387

Residential heating oil prices decrease  

U.S. Energy Information Administration (EIA) Indexed Site

5, 2014 Residential heating oil prices decrease The average retail price for home heating oil fell 1.8 cents from a week ago to 4.00 per gallon. That's down 2-tenths of a cent...

388

Residential heating oil prices increase  

U.S. Energy Information Administration (EIA) Indexed Site

heating oil prices increase The average retail price for home heating oil rose 12 cents from a week ago to 4.18 per gallon. That's up 13 cents from a year ago, based on the...

389

Cooling power of quenching oils  

Science Journals Connector (OSTI)

Industrial oils 20 and 20V have the best cooling powers of all quenching oils (used in the USSR). They secure high cooling rates at low temperatures, have a satisfactory...

L. V. Petrash

1959-07-01T23:59:59.000Z

390

Virent is Replacing Crude Oil  

Broader source: Energy.gov [DOE]

Breakout Session 2A—Conversion Technologies II: Bio-Oils, Sugar Intermediates, Precursors, Distributed Models, and Refinery Co-Processing Virent is Replacing Crude Oil Randy Cortright, Founder & Chief Technology Officer, Virent

391

THERMAL PROCESSING OF OIL SHALE/SANDS  

E-Print Network [OSTI]

)-based simulation tools to a modified in-situ process for production of oil from oil shale. The simulation tools

Michal Hradisky; Philip J. Smith; Doe Award; No. De-fe

2009-01-01T23:59:59.000Z

392

invert(ed) (oil) emulsion (drilling) mud  

Science Journals Connector (OSTI)

invert(ed) (oil) emulsion (drilling) mud, water-in-oil (drilling) mud ? Wasser-in-Öl-(Bohr)...m, (f)

2014-08-01T23:59:59.000Z

393

water-in-oil (drilling) mud  

Science Journals Connector (OSTI)

water-in-oil (drilling) mud, invert(ed) (oil) emulsion (drilling) mud ? Wasser-in-Öl-(Bohr)...m, (f)

2014-08-01T23:59:59.000Z

394

Process for the production of refrigerator oil  

SciTech Connect (OSTI)

A process for producing a high quality refrigerator oil from an oil fraction boiling at a temperature within boiling point of lubricating oil by contacting said oil fraction with a solvent to extract undesirable components thereby lowering % C..cap alpha.. of said oil fraction, hydrogenating said solvent extracted fraction under the specific conditions, and then contacting said hydrogenated oil with a solid absorbant to remove impurities; said oil fraction being obtained from a low grade naphthenic crude oil.

Kunihiro, T.; Tsuchiya, K.

1985-06-04T23:59:59.000Z

395

Biomass Derivatives Competitive with Heating Oil Costs.  

Broader source: Energy.gov [DOE]

Presentation at the May 9, 2012, Pyrolysis Oil Workship on biomass derivatives competitive with heating oil costs.

396

Nineteenth oil shale symposium proceedings  

SciTech Connect (OSTI)

This book contains 23 selections. Some of the titles are: Effects of maturation on hydrocarbon recoveries from Canadian oil shale deposits; Dust and pressure generated during commercial oil shale mine blasting: Part II; The petrosix project in Brazil - An update; Pathway of some trace elements during fluidized-bed combustion of Israeli Oil Shale; and Decommissioning of the U.S. Department of Energy Anvil Points Oil Shale Research Facility.

Gary, J.H.

1986-01-01T23:59:59.000Z

397

Heating Oil and Propane Update  

Gasoline and Diesel Fuel Update (EIA)

Maps of states participating in Winter Fuels Survey Residential propane PADD map Residential heating oil PADD map...

398

Oil shale: Technology status report  

SciTech Connect (OSTI)

This report documents the status of the US Department of Energy's (DOE) Oil Shale Program as of the end of FY 86. The report consists of (1) a status of oil shale development, (2) a description of the DOE Oil Shale Program, (3) an FY 86 oil shale research summary, and (4) a summary of FY 86 accomplishments. Discoveries were made in FY 86 about the physical and chemical properties and behavior of oil shales, process chemistry and kinetics, in situ retorting, advanced processes, and the environmental behavior and fate of wastes. The DOE Oil Shale Program shows an increasing emphasis on eastern US oil shales and in the development of advanced oil shale processing concepts. With the award to Foster Wheeler for the design of oil shale conceptual plants, the first step in the development of a systems analysis capability for the complete oil shale process has been taken. Unocal's Parachute Creek project, the only commercial oil shale plant operating in the United States, is operating at about 4000 bbl/day. The shale oil is upgraded at Parachute Creek for input to a conventional refinery. 67 refs., 21 figs., 3 tabs.

Not Available

1986-10-01T23:59:59.000Z

399

OIL ANALYSIS LAB TRIVECTOR ANALYSIS  

E-Print Network [OSTI]

OIL ANALYSIS LAB TRIVECTOR ANALYSIS This test method is a good routine test for the overall condition of the oil, the cleanliness, and can indicate the presence of wear metals that could be coming of magnetic metal particles within the oil. This may represent metals being worn from components (i

400

When DNA Needs to Stand Up and Be Counted  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

When DNA Needs to Stand Up and When DNA Needs to Stand Up and Be Counted When DNA Needs to Stand Up and Be Counted Print Wednesday, 31 May 2006 00:00 DNA microarrays are small metal, glass, or silicon chips covered with patterns of short single-stranded DNA (ssDNA). These "DNA chips" are revolutionizing biotechnology, allowing scientists to identify and count many DNA sequences simultaneously. They are the enabling technology for genomic-based medicine and are a critical component of advanced diagnostic systems for medical and homeland security applications. Like digital chips, DNA chips are parallel, accurate, fast, and small. These advantages, however, can only be realized if the fragile biomolecules survive the attachment process intact. Furthermore, biomolecules must be properly oriented to perform their biological function. In other words, the DNA literally must stand up to be counted. Understanding both the attachment and orientation of DNA on gold surfaces was the goal of recent experiments performed at ALS Beamline 8.0.1 by an international collaboration of scientists.

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Using Bytecode Instruction Counting as Portable CPU Consumption Metric  

E-Print Network [OSTI]

Using Bytecode Instruction Counting as Portable CPU Consumption Metric Walter Binder and Jarle-1015 Lausanne, Switzerland firstname.lastname@epfl.ch Abstract Accounting for the CPU consumption consumption information in order to detect a resource overuse of client components (detection of denial

Binder, Walter

402

Compensated count-rate circuit for radiation survey meter  

DOE Patents [OSTI]

A count-rate compensating circuit is provided which may be used in a portable Geiger-Mueller (G-M) survey meter to ideally compensate for couting loss errors in the G-M tube detector. In a G-M survey meter, wherein the pulse rate from the G-M tube is converted into a pulse rate current applied to a current meter calibrated to indicate dose rate, the compensation circuit generates and controls a reference voltage in response to the rate of pulses from the detector. This reference voltage is gated to the current-generating circuit at a rate identical to the rate of pulses coming from the detector so that the current flowing through the meter is varied in accordance with both the frequency and amplitude of the reference voltage pulses applied thereto so that the count rate is compensated ideally to indicate a true count rate within 1% up to a 50% duty cycle for the detector. A positive feedback circuit is used to control the reference voltage so that the meter output tracks true count rate indicative of the radiation dose rate.

Todd, R.A.

1980-05-12T23:59:59.000Z

403

Counting Defective Parking Functions Peter J Cameron, Daniel Johannsen,  

E-Print Network [OSTI]

parking function of defect k. Suppose that m cars attempt to park in a linear car park with n spacesCounting Defective Parking Functions Peter J Cameron, Daniel Johannsen, Thomas Prellberg, Pascal each choose a preferred parking space in a linear car park with n spaces. Each driver goes

Prellberg, Thomas

404

Counting Defective Parking Functions Peter J Cameron, Daniel Johannsen,  

E-Print Network [OSTI]

the corresponding assignments a defective parking function of defect k. Suppose that m cars attempt to parkCounting Defective Parking Functions Peter J Cameron, Daniel Johannsen, Thomas Prellberg, Pascal a preferred parking space in a linear car park with n spaces. Each driver goes to the chosen space and parks

405

Counts of northern elephant seals, Mirounga angustirostris, from  

E-Print Network [OSTI]

176 Counts of northern elephant seals, Mirounga angustirostris, from large-format aerial northern elephant seals, Mirounga angustirostris, at rooker- ies in the United States and Mexico elephant seals (Bar- tholomew and Boolootian, 1960; Carlisle andAplin, 1966, 1971; Odell, 1971;Antonelis et

406

Counting Protein Structures by DFS with Dynamic Decomposition  

E-Print Network [OSTI]

with dynamic decomposition for count� ing the solutions of a binary CSP completely. In particular, we use as Constraint Satisfaction Problem (CSP) [2, 4]. Recently, counting solutions of a CSP and related problems. Here, we present a method that is especially tailored for this case. Applied to the CSP formulation

Will, Sebastian

407

Comparison of two methods of counting birds at sea  

SciTech Connect (OSTI)

In an attempt to improve techniques for surveying marine birds, the author compares methods for estimating relative abundance and density. Quantitative relationships exist between estimates of relative abundance and density for most marine bird species. Estimates of abundance can be derived from values of density by regression models when the following factors are considered: bird behavior (flying, sitting, and ship-following), duration of the count, and ship speed. The author's data suggest a minimum numerical relationship of 2:1 between estimates of abundance and density for sitting birds and 1:1 for flying birds. Neither method of counting birds at sea eliminates the problem of ship-followers. However, the density method minimizes an inflationary effect caused by ship-followers that is apparent with the abundance estimate, especially when the observer's vessel is associated with fishing activities. Differences in abilities of observers to count birds is a principal, but unavoidable, source of variability with both counting methods. The density method also minimizes this problem by focusing the observer's view in an area with known boundaries. This standardization decreases variability in bird detection due to weather, size and color differences between species, flock sizes, and bird behavior. These factors are not controlled in estimates of abundance.

Powers, K.D.

1982-01-01T23:59:59.000Z

408

Research Demonstration of a Hardware Reference-Counting Heap  

Science Journals Connector (OSTI)

A hardware self-managing heap memory (RCM) for languages like Lisp, Smalltalk, and Java has been designed, built, tested and benchmarked. On every pointer write from the processor, reference-counting transactions are performed in real time within ... Keywords: Performance, garbage collection, uniprocessor

David S. Wise; Brian Heck; Caleb Hess; Willie Hunt; Eric Ost

1997-07-01T23:59:59.000Z

409

Bicycle and pedestrian counting initiative monitors nonmotorized traffic in Minnesota  

E-Print Network [OSTI]

Bicycle and pedestrian counting initiative monitors nonmotorized traffic in Minnesota transitways of Transportation (MnDOT) to develop guidelines and analyze information collected in bicycle and pedestrian traffic methods for monitoring and assessing bicycle and pedestrian traffic that can be used in both permanent

Minnesota, University of

410

Oil from Coal  

Science Journals Connector (OSTI)

... sources are not capable of indefinite expansion, since their industrial stability is dependent upon adequate markets for the main products—coke of various kinds or gas. They were, however, ... gallon and remain in operation until 1950, and that it should be extended to include diesel oil used in motor vehicles. It might be feared that this extension would involve ...

C. H. LANDER

1938-04-09T23:59:59.000Z

411

Naphthenic lube oils  

SciTech Connect (OSTI)

A process is disclosed for increasing the volume of lubricating oil base stocks recovered from a crude oil. A fraction having an atmospheric boiling range of about 675/sup 0/ to 1100/sup 0/ F. is recovered by vacuum distillation. This fraction is treated with furfural to extract a hydrocarbon mixture containing at least 50 volume % aromatic hydrocarbons. The raffinate is a lubricating oil base stock very high in paraffinic hydrocarbons and low in naphthenic hydrocarbons. The fraction extracted by the furfural contains at least about 50 volume % aromatic hydrocarbons and less than about 10 volume % paraffinic hydrocarbons. The mixture is hydrotreated to hydrogenate a substantial portion of the aromatic hydrocarbons. The hydrotreated product then is catalytically dewaxed. After removal of low boiling components, the finished lubricating oil base stock has a viscosity of at least about 200 SUS at 100/sup 0/ F., a pour point of less than 20/sup 0/ F. and contains at least 50 volume % of naphthenic hydrocarbons, a maximum of about 40 volume % aromatic hydrocarbons, and a maximum of about 10 volume % paraffinic hydrocarbons.

Hettinger Jr., W. P.; Beck, H. W.; Rozman, G. J.; Turrill, F. H.

1985-05-07T23:59:59.000Z

412

China and Peak Oil  

Science Journals Connector (OSTI)

In the mid-1950s there was a severe oil shortage in China. Fighter jets and tanks stood still and the buses on Beijing’s streets were fueled from large bags of gas on their roofs. Several drilling teams travel...

Kjell Aleklett

2012-01-01T23:59:59.000Z

413

North Slope: Oil Rush  

Science Journals Connector (OSTI)

...place of about 46,000, situated on the Chena slough of the Tanana River. It has become...permafrost. The Trans Alaska PipelineW carrying hot oil, may face worse problems. [L. A...Despite all the unanswered questions about hot pipelines and permafrost, the restoring...

Luther J. Carter

1969-10-03T23:59:59.000Z

414

Peak oil supply or oil not for sale?  

Science Journals Connector (OSTI)

Abstract The restrictions imposed by climate change are inevitable and will be exerted either via precautionary mitigation of (mainly energy-related) CO2 emissions or via irreversible impacts on ecosystems and on human habitats. Either way, oil markets are bound to incur drastic shrinking. Concern over peak oil supply will crumble when the irrevocable peak oil demand is created. Replacing oil in the world's energy economies requires redirected market forces, notably in the form of steadily increasing oil end-use prices. Yet, thus far, crude oil prices have obeyed the market fundamentals of expanding-contracting demand and oligopolistic supply. A hockey stick supply curve supports high sales prices, providing large rents to submarginal sources. Cutting oil demand and maintaining high prices implies reducing the supply hockey stick's length by curtailing some oil producers. In such a scenario, the alliances, goals, and tactics of oil geopolitics are set to change. We identify a distribution over friendly and hostile oil suppliers, with others drifting in between the two sides. Conflicts and warfare are less aimed at conquering oil fields for exploitation than at paralyzing production capabilities of opponents or of unreliable transient sources. Covert warfare and instigation of internal conflicts are likely tactics to exhaust hostile opponents.

Aviel Verbruggen; Thijs Van de Graaf

2013-01-01T23:59:59.000Z

415

Structural Oil Pan With Integrated Oil Filtration And Cooling System  

DOE Patents [OSTI]

An oil pan for an internal combustion engine includes a body defining a reservoir for collecting engine coolant. The reservoir has a bottom and side walls extending upwardly from the bottom to present a flanged lip through which the oil pan may be mounted to the engine. An oil cooler assembly is housed within the body of the oil pan for cooling lubricant received from the engine. The body includes an oil inlet passage formed integrally therewith for receiving lubricant from the engine and delivering lubricant to the oil cooler. In addition, the body also includes an oil pick up passage formed integrally therewith for providing fluid communication between the reservoir and the engine through the flanged lip.

Freese, V, Charles Edwin (Westland, MI)

2000-05-09T23:59:59.000Z

416

Crude Oil and Natural Gas Drilling Activity  

Gasoline and Diesel Fuel Update (EIA)

Jul-14 Aug-14 Sep-14 Oct-14 Nov-14 Dec-14 View History Rotary Rigs in Operation 1,876 1,904 1,930 1,924 1,925 1,882 1973-2014 By Site Onshore 1,819 1,842 1,866 1,867 1,872 1,824...

417

Crude Oil and Natural Gas Drilling Activity  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Jun-14 Jul-14 Aug-14 Sep-14 Oct-14 Nov-14 View History Rotary Rigs in Operation 1,861 1,876 1,904 1,930 1,924 1,925 1973-2014 By Site Onshore 1,804 1,819 1,842 1,866 1,867 1,872...

418

oil supply | OpenEI  

Open Energy Info (EERE)

oil supply oil supply Dataset Summary Description CIA: World Factbook assessment of proved reserves of crude oil in barrels (bbl). Proved reserves are those quantities of petroleum which, by analysis of geological and engineering data, can be estimated with a high degree of confidence to be commercially recoverable from a given date forward, from known reservoirs and under current economic conditions. Estimated as of January 1st, 2010. Source CIA Date Released January 01st, 2010 (4 years ago) Date Updated Unknown Keywords crude oil energy energy data international oil oil supply Data text/csv icon 2010 Proved Oil Reserves (csv, 4.6 KiB) text/plain icon Original Text Format (txt, 6.5 KiB) Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage Frequency

419

Measuring Dependence on Imported Oil  

Gasoline and Diesel Fuel Update (EIA)

Dependence on Imported Oil Dependence on Imported Oil by C. William Skinner* U.S. dependence on imported oil** can be measured in at least two ways. The differences hinge largely on whether oil imports are defined as net imports (total imports minus exports) or as total imports. EIA believes that the net-imports definition gives a clearer indication of the fraction of oil consumed that could not have been supplied from domestic sources and is thus the most appropriate measure. With this issue of the Monthly Energy Review, the Energy Information Administration (EIA) introduces a revised table that expresses depend- ence on imports in terms of both measures. How dependent is the United States on foreign oil? How dependent are we on oil from the Persian Gulf or other sensitive areas? Do we import more than we produce domes-

420

Regional Residential Heating Oil Prices  

Gasoline and Diesel Fuel Update (EIA)

Slide 2 of 11 Notes: One of the first places where consumers are feeling the impact of this winterÂ’s market pressures is in home heating oil prices. This chart shows prices through February 7, the most recent EIA data available. The general level of heating oil prices each year is largely a function of crude oil prices, and the price range over the course of the heating season is typically about 10 cents per gallon. Exceptions occur in unusual circumstances, such as very cold weather, large changes in crude oil prices, or supply problems. Heating oil prices for East Coast consumers started this winter at just over $1 per gallon, but rising crude oil prices drove them up nearly 21 cents per gallon through mid-January. With the continuing upward pressure from crude oil markets, magnified by a regional shortfall of

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Oil consumption, pollutant emission, oil proce volatility and economic activities in selected Asian Developing Economies.  

E-Print Network [OSTI]

??It is now well established in the literature that oil consumption, oil price shocks, and oil price volatility may impact the economic activities negatively. Studies… (more)

Rafiq, Shuddhasattwa

2009-01-01T23:59:59.000Z

422

[News and Views ‘picture story'  

Science Journals Connector (OSTI)

... A CORE sample, obtained in the course of test-drilling from a North Sea oil rig belonging to ... rig belonging to Marathon ...

1984-12-20T23:59:59.000Z

423

MECS Fuel Oil Figures  

U.S. Energy Information Administration (EIA) Indexed Site

: Percentage of Total Purchased Fuels by Type of Fuel : Percentage of Total Purchased Fuels by Type of Fuel Figure 1. Percent of Total Purchased Fuel Sources: Energy Information Administration. Office of Energy Markets and End Use, Manufacturing Energy Consumption Survey (MECS): Consumption of Energy; U.S. Department of Commerce, Bureau of the Census, Annual Survey of Manufactures (ASM): Statistics for Industry Groups and Industries: Statistical Abstract of the United States. Note: The years below the line on the "X" Axis are interpolated data--not directly from the Manufacturing Energy Consumption Survey or the Annual Survey of Manufactures. Figure 2: Changes in the Ratios of Distillate Fuel Oil to Natural Gas Figure 2. Changes in the Ratios of Distillate Fuel Oil to Natural Gas Sources: Energy Information Administration. Office of

424

fuel_oil.pdf  

U.S. Energy Information Administration (EIA) Indexed Site

Fuel Oil Usage Form Fuel Oil Usage Form 1999 Commercial Buildings Energy Consumption Survey (CBECS) 1. Timely submission of this report is mandatory under Public Law 93-275, as amended. 2. This completed report is due by 3. Data reported on this questionnaire are for the entire building identified in the label to the right. 4. Data may be submitted directly on this questionnaire or in any other format, such as a computer-generated listing, which provides the same i nformation and is conve nient for y our company. a. You may submit a single report for the entire building, or if it i s easier, a separate report for each of several accounts in the building. These will then be aggregated by the survey contractor. b. If you are concerned about your individual account information, you may c

425

Shale oil recovery process  

DOE Patents [OSTI]

A process of producing within a subterranean oil shale deposit a retort chamber containing permeable fragmented material wherein a series of explosive charges are emplaced in the deposit in a particular configuration comprising an initiating round which functions to produce an upward flexure of the overburden and to initiate fragmentation of the oil shale within the area of the retort chamber to be formed, the initiating round being followed in a predetermined time sequence by retreating lines of emplaced charges developing further fragmentation within the retort zone and continued lateral upward flexure of the overburden. The initiating round is characterized by a plurality of 5-spot patterns and the retreating lines of charges are positioned and fired along zigzag lines generally forming retreating rows of W's. Particular time delays in the firing of successive charges are disclosed.

Zerga, Daniel P. (Concord, CA)

1980-01-01T23:59:59.000Z

426

Oil shale retort apparatus  

DOE Patents [OSTI]

A retorting apparatus including a vertical kiln and a plurality of tubes for delivering rock to the top of the kiln and removal of processed rock from the bottom of the kiln so that the rock descends through the kiln as a moving bed. Distributors are provided for delivering gas to the kiln to effect heating of the rock and to disturb the rock particles during their descent. The distributors are constructed and disposed to deliver gas uniformly to the kiln and to withstand and overcome adverse conditions resulting from heat and from the descending rock. The rock delivery tubes are geometrically sized, spaced and positioned so as to deliver the shale uniformly into the kiln and form symmetrically disposed generally vertical paths, or "rock chimneys", through the descending shale which offer least resistance to upward flow of gas. When retorting oil shale, a delineated collection chamber near the top of the kiln collects gas and entrained oil mist rising through the kiln.

Reeves, Adam A. (Grand Junction, CO); Mast, Earl L. (Norman, OK); Greaves, Melvin J. (Littleton, CO)

1990-01-01T23:59:59.000Z

427

Heating oils, 1982  

SciTech Connect (OSTI)

Properties of 235 heating oils marketed in the United States were submitted for study and compilation under agreement between BETC and API. The fuels were manufactured by 25 petroleum refining companies in 88 domestic refineries. The data are tabulated according to six grades of fuel and subdivided into five geographic regions in which the fuels are marketed. The five regions containing a total of 16 marketing districts are shown on a map in the report. Trend charts are included showing average properties of the six grades of fuel for the past several years. Summaries of the results of the tests by grade and by region for 1982 compared with data for 1981 are tabulated. Analyses of grade 6 foreign import oils are presented.

Shelton, E.M.

1982-08-01T23:59:59.000Z

428

Heating oils, 1980  

SciTech Connect (OSTI)

Properties of 247 heating oils marketed in the United States were submitted for study and compilation under agreement between the Bartlesville Energy Technology Center and the American Petroleum Institute. The fuels were manufactured by 26 petroleum refining companies in 87 domestic refineries. The data are tabulated according to six grades of fuel and subdivided into five geographic regions in which the fuels are marketed. The six grades of fuel are defined by the American Society for Testing and Materials Specification D396. The five regions containing a total of 16 marketing districts are shown on a map in the report. Trend charts are included showing average properties of the six grades of fuel for the past several years. Summaries of the results of the tests by grade and by region for 1980 compared with data for 1979 are shown in tables. Analyses of grades 2, 5(light), and 6 foreign import oils are presented.

Shelton, E.M.

1980-10-01T23:59:59.000Z

429

Heating oils, 1981  

SciTech Connect (OSTI)

Properties of 249 heating oils marketed in the United States were submitted for study and compilation under agreement between the Bartlesville Energy Technology Center (BETC) and the American Petroleum Institute (API). The fuels were manufactured by 28 petroleum refining companies in 92 domestic refineries. The data are tabulated according to six grades of fuel and subdivided into five geographic regions in which the fuels are marketed. The six grades of fuels are defined by the American Society for Testing and Materials (ASTM) Specification D396. The five regions containing a total of 16 marketing districts are shown on a map in the report. Trend charts are included showing average properties of the six grades of fuel for the past several years. Summaries of the results of the tests by grade and by region for 1981 compared with data for 1980 are shown in Tables 1 through 6. Analyses of grade 6 foreign import oils are presented in Table 13.

Shelton, E.M.

1981-08-01T23:59:59.000Z

430

Apparatus And Method For Temperature Correction And Expanded Count Rate Of  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Temperature Correction And Expanded Count Temperature Correction And Expanded Count Rate Of Inorganic Scintillation Detectors Apparatus And Method For Temperature Correction And Expanded Count Rate Of Inorganic Scintillation Detectors The present invention includes an apparatus and corresponding method for temperature correction and count rate expansion of inorganic scintillation detectors. Available for thumbnail of Feynman Center (505) 665-9090 Email Apparatus And Method For Temperature Correction And Expanded Count Rate Of Inorganic Scintillation Detectors The present invention includes an apparatus and corresponding method for temperature correction and count rate expansion of inorganic scintillation detectors. A temperature sensor is attached to an inorganic scintillation detector. The inorganic scintillation detector, due to interaction with

431

Emulsified industrial oils recycling  

SciTech Connect (OSTI)

The industrial lubricant market has been analyzed with emphasis on current and/or developing recycling and re-refining technologies. This task has been performed for the United States and other industrialized countries, specifically France, West Germany, Italy and Japan. Attention has been focused at emulsion-type fluids regardless of the industrial application involved. It was found that emulsion-type fluids in the United States represent a much higher percentage of the total fluids used than in other industrialized countries. While recycling is an active matter explored by the industry, re-refining is rather a result of other issues than the mere fact that oil can be regenerated from a used industrial emulsion. To extend the longevity of an emulsion is a logical step to keep expenses down by using the emulsion as long as possible. There is, however, another important factor influencing this issue: regulations governing the disposal of such fluids. The ecological question, the respect for nature and the natural balances, is often seen now as everybody's task. Regulations forbid dumping used emulsions in the environment without prior treatment of the water phase and separation of the oil phase. This is a costly procedure, so recycling is attractive since it postpones the problem. It is questionable whether re-refining of these emulsions - as a business - could stand on its own if these emulsions did not have to be taken apart for disposal purposes. Once the emulsion is separated into a water and an oil phase, however, re-refining of the oil does become economical.

Gabris, T.

1982-04-01T23:59:59.000Z

432

STEO December 2012 - oil production  

U.S. Energy Information Administration (EIA) Indexed Site

Rise in 2012 U.S. oil production largest since 1859, output in 2013 seen Rise in 2012 U.S. oil production largest since 1859, output in 2013 seen topping 7 million bpd U.S. crude oil production is now expected to rise by about 760,000 barrels per day in 2012, the biggest annual increase in oil output since U.S. commercial crude oil production began in 1859. American oil producers are expected to pump a daily average of 6.4 million barrels of crude oil this year, according to the U.S. Energy Information Administrator's new monthly energy forecast. The annual increase in oil output tops the previous record set in 1951 and marks the largest yearly production increase ever. Most of the increase in crude oil production is driven by drilling activity in shale formations located in Texas, North Dakota and Montana. U.S. crude oil production next year is expected to top 7 million barrels per day for the first time

433

Using simple models to describe oil production from unconventional reservoirs.  

E-Print Network [OSTI]

??Shale oil (tight oil) is oil trapped in low permeability shale or sandstone. Shale oil is a resource with great potential as it is heavily… (more)

Song, Dong Hee

2014-01-01T23:59:59.000Z

434

Synthesis of Reversible Functions Beyond Gate Count and Quantum Cost  

E-Print Network [OSTI]

Many synthesis approaches for reversible and quantum logic have been proposed so far. However, most of them generate circuits with respect to simple metrics, i.e. gate count or quantum cost. On the other hand, to physically realize reversible and quantum hardware, additional constraints exist. In this paper, we describe cost metrics beyond gate count and quantum cost that should be considered while synthesizing reversible and quantum logic for the respective target technologies. We show that the evaluation of a synthesis approach may differ if additional costs are applied. In addition, a new cost metric, namely Nearest Neighbor Cost (NNC) which is imposed by realistic physical quantum architectures, is considered in detail. We discuss how existing synthesis flows can be extended to generate optimal circuits with respect to NNC while still keeping the quantum cost small.

Robert Wille; Mehdi Saeedi; Rolf Drechsler

2010-04-26T23:59:59.000Z

435

Real-time aqueous tritium monitor using liquid scintillation counting  

SciTech Connect (OSTI)

An ability to continuously monitor low-level tritium releases in aqueous effluents is of particular interest to heavy water facilities such as those at the Savannah River Site (SRS) and Canadian CANDU reactors. SRS developed a real-time monitoring system based on flow-through liquid scintillation (LS) counting. Sensitivities of 16 pCi/mL and 1 pCi/mL result from five minute and daily averages of counting data respectively. This sensitivity is about 200 times better than similar methods using solid scintillants. The LS system features uncomplicated sample pretreatment, precise of the cocktail and sample water, system features uncomplicated sample pretreatment, precise proportioning of the cocktail and sample water, on-line quench corrections, cocktail consumption as low as 0.15 mL/min, and response to changes in environmental tritium is less than 30 minutes. Field tests demonstrate that conditions necessary for stable analytical results are achieved.

Sigg, R.A.; McCarty, J.E.; Livingston, R.R.; Sanders, M.A.

1994-07-01T23:59:59.000Z

436

Total Gamma Count Rate Analysis Method for Nondestructive Assay Characterization  

SciTech Connect (OSTI)

A new approach to nondestructively characterize waste for disposal, based on total gamma response, has been developed at the Idaho Cleanup Project by CH2M-WG Idaho, LLC and Idaho State University, and is called the total gamma count rate analysis method. The total gamma count rate analysis method measures gamma interactions that produce energetic electrons or positrons in a detector. Based on previous experience with waste assays, the radionuclide content of the waste container is then determined. This approach potentially can yield minimum detection limits of less than 10 nCi/g. The importance of this method is twofold. First, determination of transuranic activity can be made for waste containers that are below the traditional minimum detection limits. Second, waste above 10 nCi/g and below 100 nCi/g can be identified, and a potential path for disposal resolved.

Cecilia R. Hoffman; Yale D. Harker

2006-03-01T23:59:59.000Z

437

Power counting renormalizability of scalar theory in Lifshitz spacetime  

E-Print Network [OSTI]

We analyse the power counting renormalizability of scalar theory in Lifshitz spacetime in D+2 dimensions. We show the spectral dimension becomes 2+(D/z) (z is the critical exponent) after integrating out the radion field. We comment on the AdS/CFT correspondence, and on how to avoid the Lifshitz singularity by flowing into AdS spacetime in the infrared. We also comment on the quantum gravity in Lifshitz spacetime.

Takayuki Hirayama

2012-10-25T23:59:59.000Z

438

Power spectrum of the fluctuation of Chebyshev's prime counting function  

E-Print Network [OSTI]

The one-sided power spectrum of the fluctuation of Chebyshev's weighted prime counting function is numerically estimated based on samples of the fluctuating function of different sizes. The power spectrum is also estimated analytically for large frequency based on Riemann hypothesis and the exact formula for the fluctuating function in terms of all the non-trivial Riemann zeroes. Our analytical estimate is consistent with our numerical estimate of a 1/f^2 power spectrum.

Boon Leong Lan; Shaohen Yong

2005-06-20T23:59:59.000Z

439

Power Counting Regime of Chiral Extrapolation and Beyond  

E-Print Network [OSTI]

Finite-range regularised (FRR) chiral effective field theory is presented in the context of approximation schemes ubiquitous in modern lattice QCD calculations. Using FRR techniques, the power-counting regime (PCR) of chiral perturbation theory can be estimated. To fourth-order in the expansion at the 1% tolerance level, we find m_\\pi < 180 MeV for the PCR, extending only a small distance beyond the physical pion mass.

Derek B. Leinweber; Anthony W. Thomas; Ross D. Young

2005-10-12T23:59:59.000Z

440

Counting states in the Bousso-Polchinski Landscape  

E-Print Network [OSTI]

Starting from an exact counting of small and positive cosmological constant states in the Bousso-Polchinski Landscape we recover a well-known approximate formula and a systematic method of improvement by means of the Poisson summation formula. This is a contribution to the special Volume published by the University of Zaragoza in honor of Julio Abad Anto\\~nanzas. En memoria de nuestro amigo, compa\\~nero y maestro Julio.

Cesar Asensio; Antonio Segui

2009-03-11T23:59:59.000Z

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Power counting renormalizability of quantum gravity in Lifshitz spacetime  

E-Print Network [OSTI]

We analyse the power counting renormalizability of the quantum field theory of Einstein or Einstein-Gauss-Bonnet gravity in D+2 dimensional Lifshitz spacetime. We show the spectral dimension becomes 2+(D/z) at the UV region where z is the critical exponent. Since it is larger than two, the quantum theory of Einstein gravity is not power counting renormalizable. For the pure Einstein-Gauss-Bonnet gravity, where Lifshitz spacetime is allowed only when the parameters are fine tuned, it happens that the graviton modes do not propagate and the quantum field theory is accidentally renormalizable when z>=D. Another method is discretizing the radial coordinate which changes the spectral dimension to 1+(D/z) at the UV region. Since our four dimensional spacetime is continuous, the four dimensional Lorentz symmetry is recovered at the low energy and the power counting renormalizability is still kept for z>=D, if the spacetime near the null singularity in Lifshitz spacetime is modified into AdS spacetime and the discrete radial direction is compactified like a brane world scenario. We also comment on the AdS/CFT correspondence.

Takayuki Hirayama

2012-10-25T23:59:59.000Z

442

Chapter 1 - Refining Heavy Oil and Extra-heavy Oil  

Science Journals Connector (OSTI)

The definitions of heavy oil, extra-heavy oil, and tar sand bitumen are inadequate insofar as the definitions rely upon a single physical property to define a complex feedstock. This chapter presents viable options to the antiquated definitions of the heavy feedstocks (heavy oil, extra-heavy oil, and tar sand bitumen) as well as an introduction to the various aspects of heavy feedstock refining in order for the reader to place each feedstock in the correct context of properties, behavior, and refining needs.

James G. Speight

2013-01-01T23:59:59.000Z

443

Unconventional oil market assessment: ex situ oil shale.  

E-Print Network [OSTI]

??This thesis focused on exploring the economic limitations for the development of western oil shale. The analysis was developed by scaling a known process and… (more)

Castro-Dominguez, Bernardo

2010-01-01T23:59:59.000Z

444

Crude Oil Prices Table 21. Domestic Crude Oil First Purchase...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Information Administration Petroleum Marketing Annual 1995 41 Table 21. Domestic Crude Oil First Purchase Prices (Dollars per Barrel) - Continued Year Month PAD District II...

445

Validated HPLC Method and Temperature Stabilities for Oil-Soluble Organosulfur Compounds in Garlic Macerated Oil  

Science Journals Connector (OSTI)

......HPLC Method and Temperature Stabilities for Oil-Soluble Organosulfur Compounds in Garlic Macerated Oil Miyoung Yoo Sunyoung Kim Sanghee Lee Dongbin...enhance the utilization of garlic macerated oil as functional foods, oil-soluble organosulfur......

Miyoung Yoo; Sunyoung Kim; Sanghee Lee; Dongbin Shin

2013-11-01T23:59:59.000Z

446

Consumer Winter Heating Oil Costs  

Gasoline and Diesel Fuel Update (EIA)

5 5 Notes: Using the Northeast as a regional focus for heating oil, the typical oil-heated household consumes about 680 gallons of oil during the winter, assuming that weather is "normal." The previous three winters were warmer than average and generated below normal consumption rates. Last winter, consumers saw large increases over the very low heating oil prices seen during the winter of 1998-1999 but, outside of the cold period in late January/early February they saw relatively low consumption rates due to generally warm weather. Even without particularly sharp cold weather events this winter, we think consumers are likely to see higher average heating oil prices than were seen last winter. If weather is normal, our projections imply New England heating oil

447

Retail Diesel Fuel Oil Prices  

Gasoline and Diesel Fuel Update (EIA)

Along with heating oil prices, the distillate supply squeeze has Along with heating oil prices, the distillate supply squeeze has severely impacted diesel fuel prices, especially in the Northeast. Diesel fuel is bascially the same product as home heating oil. The primary difference is that diesel has a lower sulfur content. When heating oil is in short supply, low sulfur diesel fuel can be diverted to heating oil supply. Thus, diesel fuel prices rise with heating heating oil prices. Retail diesel fuel prices nationally, along with those of most other petroleum prices, increased steadily through most of 1999. But prices in the Northeast jumped dramatically in the third week of January. Diesel fuel prices in New England rose nearly 68 cents per gallon, or 47 percent, between January 17 and February 7. While EIA does not have

448

Northeast Home Heating Oil Reserve  

Gasoline and Diesel Fuel Update (EIA)

Northeast Home Heating Oil Reserve Northeast Home Heating Oil Reserve Information on the Northeast Home Heating Oil Reserve is available from the U.S. Department of Energy (DOE) Office of Petroleum Reserves web site at http://www.fossil.energy.gov/programs/reserves/heatingoil/. Northeast Home Heating Oil Reserve (NEHHOR) inventories now classified as ultra-low sulfur distillate (15 parts per million) are not considered to be in the commercial sector and therefore are excluded from distillate fuel oil supply and disposition statistics in Energy Information Administration publications, such as the Weekly Petroleum Status Report, Petroleum Supply Monthly, and This Week In Petroleum. Northeast Home Heating Oil Reserve Terminal Operator Location (Thousand Barrels) Hess Corp. Groton, CT 500*

449

International Oil Supplies and Demands  

SciTech Connect (OSTI)

The eleventh Energy Modeling Forum (EMF) working group met four times over the 1989--90 period to compare alternative perspectives on international oil supplies and demands through 2010 and to discuss how alternative supply and demand trends influence the world's dependence upon Middle Eastern oil. Proprietors of eleven economic models of the world oil market used their respective models to simulate a dozen scenarios using standardized assumptions. From its inception, the study was not designed to focus on the short-run impacts of disruptions on oil markets. Nor did the working group attempt to provide a forecast or just a single view of the likely future path for oil prices. The model results guided the group's thinking about many important longer-run market relationships and helped to identify differences of opinion about future oil supplies, demands, and dependence.

Not Available

1991-09-01T23:59:59.000Z

450

International Oil Supplies and Demands  

SciTech Connect (OSTI)

The eleventh Energy Modeling Forum (EMF) working group met four times over the 1989--1990 period to compare alternative perspectives on international oil supplies and demands through 2010 and to discuss how alternative supply and demand trends influence the world's dependence upon Middle Eastern oil. Proprietors of eleven economic models of the world oil market used their respective models to simulate a dozen scenarios using standardized assumptions. From its inception, the study was not designed to focus on the short-run impacts of disruptions on oil markets. Nor did the working group attempt to provide a forecast or just a single view of the likely future path for oil prices. The model results guided the group's thinking about many important longer-run market relationships and helped to identify differences of opinion about future oil supplies, demands, and dependence.

Not Available

1992-04-01T23:59:59.000Z

451

The twentieth oil shale symposium proceedings  

SciTech Connect (OSTI)

This book contains 20 selections. Some of the titles are: The technical contributions of John Ward Smith in oil shale research; Oil shale rubble fires: ignition and extinguishment; Fragmentation of eastern oil shale for in situ recovery; A study of thermal properties of Chinese oil shale; and Natural invasion of native plants on retorted oil shale.

Gary, J.H.

1987-01-01T23:59:59.000Z

452

Rheological Behavior of Castor Oil Biodiesel  

Science Journals Connector (OSTI)

Rheological Behavior of Castor Oil Biodiesel ... This work aims at assessing the rheological behavior of castor oil, castor oil biodiesel, and undegraded and degraded biodiesel at different exposure times and temperatures. ... Castor oil biodiesel presents viscosity higher than diesel oil, but this drawback can be corrected by means of blends of both components at different proportions. ...

Marta M. Conceição; Roberlúcia A. Candeia; Hermesson J. Dantas; Luiz E. B. Soledade; Valter J. Fernandes, Jr.; Antonio G. Souza

2005-07-08T23:59:59.000Z

453

BP Oil Spill November 10, 2011  

E-Print Network [OSTI]

BP Oil Spill Qiyam Tung November 10, 2011 1 Introduction Figure 1: BP Oil spill (source: http://thefoxisblack.com/2010/05/02/the-bp-oil-spill-in-the-gulf-of-mexico/) Last year, there was a major oil spill caused major techniques to minimize the threat once it happened. What kind of damage would an oil spill like this cause

Lega, Joceline

454

Does parental age difference affect offspring count in humans? Comment on Fieder and Huber  

Science Journals Connector (OSTI)

2007 The Royal Society 23 February 2008 article-commentary Evolutionary biology Does parental age difference affect offspring count in...689-691. ( doi:10.1098/rsbl.2007.0324 ) Does parental age difference affect offspring count in...

2008-01-01T23:59:59.000Z

455

Solar retorting of oil shale  

DOE Patents [OSTI]

An apparatus and method for retorting oil shale using solar radiation. Oil shale is introduced into a first retorting chamber having a solar focus zone. There the oil shale is exposed to solar radiation and rapidly brought to a predetermined retorting temperature. Once the shale has reached this temperature, it is removed from the solar focus zone and transferred to a second retorting chamber where it is heated. In a second chamber, the oil shale is maintained at the retorting temperature, without direct exposure to solar radiation, until the retorting is complete.

Gregg, David W. (Morago, CA)

1983-01-01T23:59:59.000Z

456

Oil cooled, hermetic refrigerant compressor  

DOE Patents [OSTI]

A hermetic refrigerant compressor having an electric motor and compressor assembly in a hermetic shell is cooled by oil which is first cooled in an external cooler 18 and is then delivered through the shell to the top of the motor rotor 24 where most of it is flung radially outwardly within the confined space provided by the cap 50 which channels the flow of most of the oil around the top of the stator 26 and then out to a multiplicity of holes 52 to flow down to the sump and provide further cooling of the motor and compressor. Part of the oil descends internally of the motor to the annular chamber 58 to provide oil cooling of the lower part of the motor, with this oil exiting through vent hole 62 also to the sump. Suction gas with entrained oil and liquid refrigerant therein is delivered to an oil separator 68 from which the suction gas passes by a confined path in pipe 66 to the suction plenum 64 and the separated oil drops from the separator to the sump. By providing the oil cooling of the parts, the suction gas is not used for cooling purposes and accordingly increase in superheat is substantially avoided in the passage of the suction gas through the shell to the suction plenum 64.

English, William A. (Murrysville, PA); Young, Robert R. (Murrysville, PA)

1985-01-01T23:59:59.000Z

457

Oil cooled, hermetic refrigerant compressor  

DOE Patents [OSTI]

A hermetic refrigerant compressor having an electric motor and compressor assembly in a hermetic shell is cooled by oil which is first cooled in an external cooler and is then delivered through the shell to the top of the motor rotor where most of it is flung radially outwardly within the confined space provided by the cap which channels the flow of most of the oil around the top of the stator and then out to a multiplicity of holes to flow down to the sump and provide further cooling of the motor and compressor. Part of the oil descends internally of the motor to the annular chamber to provide oil cooling of the lower part of the motor, with this oil exiting through vent hole also to the sump. Suction gas with entrained oil and liquid refrigerant therein is delivered to an oil separator from which the suction gas passes by a confined path in pipe to the suction plenum and the separated oil drops from the separator to the sump. By providing the oil cooling of the parts, the suction gas is not used for cooling purposes and accordingly increase in superheat is substantially avoided in the passage of the suction gas through the shell to the suction plenum. 3 figs.

English, W.A.; Young, R.R.

1985-05-14T23:59:59.000Z

458

Making Votes Count: How to Hack an Election January 31, 2004  

E-Print Network [OSTI]

Making Votes Count: How to Hack an Election January 31, 2004 MAKING VOTES COUNT How to Hack&pagewanted=print&position= (1 of 2)12/22/2004 6:49:30 AM #12;Making Votes Count: How to Hack an Election

Rivest, Ronald L.

459

Automatic fruit recognition and counting from multiple images1 , C.A. Glasbey a,  

E-Print Network [OSTI]

Automatic fruit recognition and counting from multiple images1 Y. Songa , C.A. Glasbey a, , G.e. measuring the observable characteristics of living10 organisms, such as counting the number of fruits and counting fruits from images12 in cluttered greenhouses. The plants are 3-metre high peppers with fruits

Glasbey, Chris

460

Scene-adaptive accurate and fast vertical crowd counting via joint using depth and color information  

Science Journals Connector (OSTI)

Reliable and real-time crowd counting is one of the most important tasks in intelligent visual surveillance systems. Most previous works only count passing people based on color information. Owing to the restrictions of color information influences themselves ... Keywords: Crowd counting, Multimodal joint multimedia processing, Ordinary depth camera, Real time system, Scene-adaptive scheme

Huiyuan Fu, Huadong Ma, Hongtian Xiao

2014-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

European Market Study for BioOil (Pyrolysis Oil)  

E-Print Network [OSTI]

European Market Study for BioOil (Pyrolysis Oil) Dec 15, 2006 Doug Bradley President Climate Change Solutions National Team Leader- IEA Bioenergy Task 40- Bio-trade 402 Third Avenue ·Ottawa, Ontario ·Canada K. Market Determining Factors 5. EU Country Perspectives 6. Potential European Markets 6.1. Pulp Mill Lime

462

Rheological properties of heavy oils and heavy oil emulsions  

SciTech Connect (OSTI)

In this study, the author investigated the effects of a number of process variables such as shear rate, measurement temperature, pressure, the influence of pretreatment, and the role of various amounts of added water on the rheology of the resulting heavy oil or the emulsion. Rheological properties of heavy oils and the corresponding emulsions are important from transportation and processing standpoints.

Khan, M.R. [Texaco, Inc., Beacon, NY (United States). Fuels and Lubricants Technology Dept.

1996-06-01T23:59:59.000Z

463

Rerefined Oil: An Option that Saves Oil, Minimizes Pollution  

Science Journals Connector (OSTI)

...of the annual oil consumption of the United States...desirably, burned as a fuel under carefully...percent of U.S. consumption of petroleum. About...oil was burned as fuel. Another 200 million...from gasoline and diesel fuel, carbon...me-tallic particles from engine wear, and metals...

THOMAS H. MAUGH II

1976-09-17T23:59:59.000Z

464

Oil burner nozzle  

DOE Patents [OSTI]

An oil burner nozzle for use with liquid fuels and solid-containing liquid fuels. The nozzle comprises a fuel-carrying pipe, a barrel concentrically disposed about the pipe, and an outer sleeve retaining member for the barrel. An atomizing vapor passes along an axial passageway in the barrel, through a bore in the barrel and then along the outer surface of the front portion of the barrel. The atomizing vapor is directed by the outer sleeve across the path of the fuel as it emerges from the barrel. The fuel is atomized and may then be ignited.

Wright, Donald G. (Rockville Center, NY)

1982-01-01T23:59:59.000Z

465

Oil resources: the key to prosperity or to poverty? : Influence of oil price shocks on spending of oil revenues.  

E-Print Network [OSTI]

??Abundant natural resources, in particular oil, play an important role in the economics of many countries. The oil price shocks that have been happening continuously… (more)

Selivanova, Olga

2008-01-01T23:59:59.000Z

466

WASTEWATER TREATMENT IN THE OIL SHALE INDUSTRY  

E-Print Network [OSTI]

is in intimate contact with oil and shale during In in-situin contact with the oil and shale. These methods and othersWaters from Green River Oil Shale," Chem. and Ind. , 1. ,

Fox, J.P.

2010-01-01T23:59:59.000Z

467

This Week In Petroleum Crude Oil Section  

Gasoline and Diesel Fuel Update (EIA)

Crude oil futures and estimated contract prices (dollars per barrel) Contract 1 Contract 2 Contract 3 Contract 4 Crude oil futures price contract 1 graph Crude oil futures price...

468

WASTEWATER TREATMENT IN THE OIL SHALE INDUSTRY  

E-Print Network [OSTI]

Waters from Green River Oil Shale," Chem. and Ind. , 1. ,Effluents from In-Situ oil Shale Processing," in Proceedingsin the Treatment of Oil Shale Retort Waters," in Proceedings

Fox, J.P.

2010-01-01T23:59:59.000Z

469

CORROSION OF METALS IN OIL SHALE ENVIRONMENTS  

E-Print Network [OSTI]

CORROSION OF METALS IN OIL SHALE ENVIRONMENTS A. Levy and R.of Metals in In-Situ Oil Shale Retorts," NACE Corrosion 80,Elevated Temperature Corrosion of Oil Shale Retort Component

Bellman Jr., R.

2012-01-01T23:59:59.000Z

470

WASTEWATER TREATMENT IN THE OIL SHALE INDUSTRY  

E-Print Network [OSTI]

III, "Method of Breaking Shale Oil-Water Emulsion," U. S.and Biological Treatment of Shale Oil Retort Water, DraftPA (1979). H. H. Peters, Shale Oil Waste Water Recovery by

Fox, J.P.

2010-01-01T23:59:59.000Z

471

CORROSION OF METALS IN OIL SHALE ENVIRONMENTS  

E-Print Network [OSTI]

temperature, type of shale and oil content of shale iscontent of the shale, and shale oil content of the rock cantemperatures. Lean and Rich Shale Oil shales vary in their

Bellman Jr., R.

2012-01-01T23:59:59.000Z

472

Peak Oil Futures: Same Crisis, Different Responses  

Science Journals Connector (OSTI)

Peak oil theory predicts that global oil production will soon start a terminal decline. ... resource and technology will be available to replace oil as the backbone resource of industrial society. ... understand ...

Jörg Friedrichs

2012-01-01T23:59:59.000Z

473

Oil droplets as light absorbents in seawater  

Science Journals Connector (OSTI)

This paper presents spectra of light absorption coefficient of oil-in-water emulsion, derived using the Mie theory. In order to achieve that concentration of oil, degree of oil...

Otremba, Zbigniew

2007-01-01T23:59:59.000Z

474

Membrane degumming of crude vegetable oil  

E-Print Network [OSTI]

Crude vegetable oils contain various minor substances like phospholipids, coloring pigments, and free fatty acids (FFA) that may affect quality of the oil. Reduction of energy costs and waste disposal are major concerns for many oil refiners who...

Lin, Lan

2012-06-07T23:59:59.000Z

475

Crude oil and crude oil derivatives transactions by oil and gas producers.  

E-Print Network [OSTI]

??This study attempts to resolve two important issues. First, it investigates the diversification benefit of crude oil for equities. Second, it examines whether or not… (more)

Xu, He

2007-01-01T23:59:59.000Z

476

Foamy Oil Flow and its Role in Heavy Oil Production  

Science Journals Connector (OSTI)

Two?phase oil?gas flow in porous media is often encountered during oil production from oil bearing sedimentary rocks. Traditionally such flow is modeled by extending the Darcy’s law to two?phase flow by employing the concept of saturation dependent relative permeability. This model is remarkably successful as long as the fluid distribution within the porous medium is controlled by capillary forces. Under this condition the two fluids appear to flow in their own continuous flow channels. This flow description is applicable to most reservoir flow scenarios encountered in light oil production. However in primary production of heavy oil under solution?gas drive this flow model often fails to provide a satisfactory match of the observed behaviour.

Brij B. Maini; Bashir Busahmin

2010-01-01T23:59:59.000Z

477

www.fightbac.o anola oil is  

E-Print Network [OSTI]

Ca co Th Ca "Canola" c which is Addition Ca he Ca in Th ca Ca m C know? anola oil is ooking oils. he average anola oil is comes fro s another nal Inform anola oil is eart healthy anola oil is n the world. he part of th anola meal anola oil ca many crop va ano the lowest . canola see a good sou m

478

Neutron counting and gamma spectroscopy with PVT detectors.  

SciTech Connect (OSTI)

Radiation portals normally incorporate a dedicated neutron counter and a gamma-ray detector with at least some spectroscopic capability. This paper describes the design and presents characterization data for a detection system called PVT-NG, which uses large polyvinyl toluene (PVT) detectors to monitor both types of radiation. The detector material is surrounded by polyvinyl chloride (PVC), which emits high-energy gamma rays following neutron capture reactions. Assessments based on high-energy gamma rays are well suited for the detection of neutron sources, particularly in border security applications, because few isotopes in the normal stream of commerce have significant gamma ray yields above 3 MeV. Therefore, an increased count rate for high-energy gamma rays is a strong indicator for the presence of a neutron source. The sensitivity of the PVT-NG sensor to bare {sup 252}Cf is 1.9 counts per second per nanogram (cps/ng) and the sensitivity for {sup 252}Cf surrounded by 2.5 cm of polyethylene is 2.3 cps/ng. The PVT-NG sensor is a proof-of-principal sensor that was not fully optimized. The neutron detector sensitivity could be improved, for instance, by using additional moderator. The PVT-NG detectors and associated electronics are designed to provide improved resolution, gain stability, and performance at high-count rates relative to PVT detectors in typical radiation portals. As well as addressing the needs for neutron detection, these characteristics are also desirable for analysis of the gamma-ray spectra. Accurate isotope identification results were obtained despite the common impression that the absence of photopeaks makes data collected by PVT detectors unsuitable for spectroscopic analysis. The PVT detectors in the PVT-NG unit are used for both gamma-ray and neutron detection, so the sensitive volume exceeds the volume of the detection elements in portals that use dedicated components to detect each type of radiation.

Mitchell, Dean James; Brusseau, Charles A.

2011-06-01T23:59:59.000Z

479

Determination of glomerular filtration rate by external counting methods  

E-Print Network [OSTI]

comparing the DTPA to other accepted methods; the results were very favorable for the use of ggmTC-DTPA. Klopper et al. , sa1d mTc-DTPA ". . . rapidly prepared by a kit method, is a useful addition to the list of radiopharmaceuticals that can be used... points. First, the external counting method is suitable as a true means of determining the glomerular filtration rate (GFR). Second, the method is applicable to cats. To do this, five dogs were injected with ggmTc(Sn)-DTPA. Plasma samples were drawn...

Sartor, Tammy Lee

1981-01-01T23:59:59.000Z

480

Crude Oil Supply  

Gasoline and Diesel Fuel Update (EIA)

Crude Oil Supply Domestic Production (a) .......................................... 6.22 6.29 6.42 7.02 7.11 7.29 7.61 7.97 8.26 8.45 8.57 8.86 6.49 7.50 8.54 Alaska .................................................................. 0.58 0.53 0.44 0.55 0.54 0.51 0.48 0.52 0.51 0.47 0.42 0.49 0.53 0.51 0.47 Federal Gulf of Mexico (b) .................................... 1.34 1.19 1.18 1.36 1.30 1.22 1.27 1.29 1.34 1.36 1.37 1.45 1.27 1.27 1.38 Lower 48 States (excl GOM) ................................ 4.31 4.57 4.80 5.11 5.28 5.56 5.87 6.16 6.41 6.61 6.77 6.91 4.70 5.72 6.68 Crude Oil Net Imports (c) ......................................... 8.55 8.88 8.52 7.89 7.47 7.61 7.94 7.36 6.66 6.78 6.83 6.06 8.46 7.60 6.58 SPR Net Withdrawals ..............................................

Note: This page contains sample records for the topic "oil rig count" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Process oil manufacturing process  

SciTech Connect (OSTI)

A method is described for producing a naphthenic process oil having reduced sulfur, nitrogen and polynuclear aromatics contents from a naphthenic feed containing same and having an atmospheric boiling range of about 650/sup 0/ to about 1200/sup 0/F. comprising: A. passing the feed into a first hydrotreating stage having a hydrotreating catalyst therein, the stage maintained at a temperature of about 600/sup 0/ to about 750/sup 0/F. and at a hydrogen partial pressure of about 400 to about 1500 psig, to convert at least a portion of the sulfur to hydrogen sulfide and the nitrogen to ammonia; B. passing the hydrotreated feed from the first hydrotreating stage in an intermediate stripping stage wherein hydrogen sulfide, ammonia, or both is removed; C. passing the hydrotreated feed from the intermediate stage into a second hydrotreating stage having therein a hydrotreating catalyst selected from the group consisting of nickel-molybdenum, cobalt-molybdenum, nickel-tungsten and mixtures thereof, the second hydrotreating stage maintained at a temperature lower than that of the first hydrotreating stage and at a hydrogen partial pressure ranging between about 400 and about 1,500 psig; D. monitoring the polynuclear aromatics content, the degree of saturation, or both of the product exiting the second hydrotreating stage; and, E. adjusting the temperature in the second hydrotreating stage to keep the polynuclear aromatics content, the degree of saturation, or both below a limit suitable for process oil.

Corman, B.G.; Korbach, P.F.; Webber, K.M.

1989-01-31T23:59:59.000Z

482

Soybean Oil as Diesel Fuel  

Science Journals Connector (OSTI)

Soybean Oil as Diesel Fuel ... TESTS are reported from Japan on the use of soybean oil as Diesel fuel in a 12-horsepower engine of 150-mm. ... This trouble was overcome by passing through some of the Diesel cooling water to heat the fuel tank and supply line. ...

C.H.S. TUPHOLME

1940-10-10T23:59:59.000Z

483

Oil shale - Heir to the petroleum kingdom  

Science Journals Connector (OSTI)

Oil shale - Heir to the petroleum kingdom ... A discussion of oil shale provides students with real-world problems that require chemical literacy. ...

Y. Schachter

1983-01-01T23:59:59.000Z

484

low-solids oil emulsion (drilling) mud  

Science Journals Connector (OSTI)

low-solids oil emulsion (drilling) mud, low-solids oil-in-water (drilling) mud ? öl-in-Wasser-(Bohr)...m, (f) mit geringem Feststoffanteil

2014-08-01T23:59:59.000Z

485

Compositional changes in heavy oil steamflood simulators.  

E-Print Network [OSTI]

??The numerical simulation of heavy oil steamfloods has generally been conducted assuming that the oil is non-volatile. Reservoir simulation has traditionally ignored compositional effect s… (more)

Lolley, Christopher Scott

2012-01-01T23:59:59.000Z

486

Marine Fuel Oil on a Mixed Base  

Science Journals Connector (OSTI)

Three grades of high–viscosity marine fuel oil are manufactured according to TU 38. ... developing the composition and technology for production of marine fuel oils [1– 4].

S. V. Kotov; A. G. Oltyrev; I. N. Kankaeva…

2001-05-01T23:59:59.000Z

487

Biomass Derivatives Competitive with Heating Oil Costs.  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Biomass Derivatives Competitive with Heating Oil Costs Transportation fuel Heat or electricity * Data are from literature, except heating oil is adjusted from 2011 winter average *...

488

Oil & Gas Technology Center | GE Global Research  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Global Research Oil & Gas Technology Center GE Global Research Oil & Gas Technology Center Mark Little, SVP and chief technology officer for GE, and Eric Gebhardt, vice president...

489

Review of EIA Oil Production Outlooks  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Review of EIA oil production outlooks For 2014 EIA Energy Conference July 15, 2014 | Washington, DC By Samuel Gorgen, Upstream Analyst Overview Gorgen, Tight Oil Production Trends...

490

Oil market in international and Norwegian perspectives.  

E-Print Network [OSTI]

??Crude oil is the most important energy source in global perspective. About 35 percent of the world’s primary energy consumption is supplied by oil, followed… (more)

Singsaas, Julia Nazyrova

2009-01-01T23:59:59.000Z

491

U.S. Crude Oil Export Policy  

Gasoline and Diesel Fuel Update (EIA)

or use therein. * Crude exported from Alaska's Cook Inlet. * Heavy California crude oil. * Exports connected to refining or exchange of petroleum reserve oil. * Re-exportation...

492

Distillate Fuel Oil Sales for Residential Use  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

End Use Product: Residential - Distillate Fuel Oil Residential - No. 1 Residential - No. 2 Residential - Kerosene Commercial - Distillate Fuel Oil Commercial - No. 1 Distillate...

493

Oil and Gas Research| GE Global Research  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Oil & Gas We're balancing the increasing demand for finite resources with technology that ensures access to energy for generations to come. Home > Innovation > Oil & Gas Innovation...

494

Enhanced Oil Recovery | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Enhanced Oil Recovery Enhanced Oil Recovery Thanks in part to innovations supported by the Office of Fossil Energy's National Energy Technology Laboratory over the past 30 years,...

495

United Oil Company | Open Energy Information  

Open Energy Info (EERE)

Company Jump to: navigation, search Name: United Oil Company Place: Pittsburgh, Pennsylvania Product: Vegetable-Oil producer Biodiesel producer based in Pittsburgh, PA References:...

496

AEO Early Release 2013 - oil  

U.S. Energy Information Administration (EIA) Indexed Site

Growing U.S. oil output and rising vehicle fuel economy to cut Growing U.S. oil output and rising vehicle fuel economy to cut U.S. reliance on foreign oil The United States is expected to continue cutting its dependence on petroleum and liquid fuels imports over the rest of this decade because of growing domestic crude oil production and more fuel-efficient vehicles on America's highways. The new long-term outlook from the U.S. Energy Information Administration shows America's dependence on imported petroleum and liquid fuels will decline from 45 percent of domestic demand last year to 34 percent by 2019. U.S. dependence on imported oil had reached 60 percent as recently as 2005. EIA Administrator Adam Sieminski explains: "The United States will be able to meet more of its own energy needs because of two key

497

Heavy oil transportation by pipeline  

SciTech Connect (OSTI)

Worldwide there are a number of pipelines used to transport heavy crude oils. The operations are facilitated in a variety of ways. For example, the Alyeska pipeline is an insulated pipeline transporting warm oil over 800 miles. This 48-inch line experiences limited heat loss due to the insulation, volume of oil contained, and heat gain due to friction and pumping. Some European trunk lines periodically handle heavy and waxy crudes. This is achieved by proper sizing of batches, following waxy crudes with non-waxy crudes, and increased use of scrapers. In a former Soviet republic, the transportation of heavy crude oil by pipeline has been facilitated by blending with a lighter Siberian crude. The paper describes the pipeline transport of heavy crudes by Interprovincial Pipe Line Inc. The paper describes enhancing heavy oil transportation by emulsion formation, droplet suspension, dilution, drag reducing agents, and heating.

Gerez, J.M.; Pick, A.R. [Interprovincial Pipe Line Inc., Edmonton, Alberta (Canada)

1996-12-31T23:59:59.000Z

498

Process for oil shale retorting  

DOE Patents [OSTI]

Particulate oil shale is subjected to a pyrolysis with a hot, non-oxygenous gas in a pyrolysis vessel, with the products of the pyrolysis of the shale contained kerogen being withdrawn as an entrained mist of shale oil droplets in a gas for a separation of the liquid from the gas. Hot retorted shale withdrawn from the pyrolysis vessel is treated in a separate container with an oxygenous gas so as to provide combustion of residual carbon retained on the shale, producing a high temperature gas for the production of some steam and for heating the non-oxygenous gas used in the oil shale retorting process in the first vessel. The net energy recovery includes essentially complete recovery of the organic hydrocarbon material in the oil shale as a liquid shale oil, a high BTU gas, and high temperature steam.

Jones, John B. (300 Enterprise Bldg., Grand Junction, CO 80501); Kunchal, S. Kumar (300 Enterprise Bldg., Grand Junction, CO 80501)

1981-10-27T23:59:59.000Z

499

Consumer Winter Heating Oil Costs  

Gasoline and Diesel Fuel Update (EIA)

6 6 Notes: The outlook for heating oil costs this winter, due to high crude oil costs and tight heating oil supplies, breaks down to an expected increase in heating expenditures for a typical oil-heated household of more than $200 this winter, the result of an 18% increase in the average price and an 11% increase in consumption. The consumption increase is due to the colder than normal temperatures experienced so far this winter and our expectations of normal winter weather for the rest of this heating season. Last winter, Northeast heating oil (and diesel fuel) markets experienced an extremely sharp spike in prices when a severe weather situation developed in late January. It is virtually impossible to gauge the probability of a similar (or worse) price shock recurring this winter,

500

Recent developments in position-sensitive neutron counting  

SciTech Connect (OSTI)

Continuing research on advanced methods of thermal neutron detection and position sensing with gas-filled counters was aimed at improving their performance and extending the limits of their applicability. High electron drift velocities obtained from measurements on gas mixtures containing CF/sub 4/ motivated us to evaluate the properties of /sup 3/He-CF/sub 4/ and Ar-CF/sub 4/ mixtures to show that these gases have the potential of improving the count rate capability, spatial resolution, and photon discrimination of neutron PSPCs (position-sensitive proportional counters) and fission counters. In support of the U.S. National Small-Angle Neutron Scattering (SANS) Facility we developed a large-area (65-cm x 65-cm) PSPC camera. RC position encoding was chosen for simplicity of construction, but since previous experience with this encoding method had been limited to smaller PSPCs (area < 25 cm x 25 cm), the main objective of this development was to show that RC encoding parameters and construction methods could be scaled up for larger area PSPCs. The use of the new counter gas mixtures enabled the development of position-sensitive transmission line fission counters (TLFCs) for neutron flux monitoring and a one-dimensional, curved PSPC for large-angle (130/sup 0/) neutron diffraction experiments. The main objective of these developments was to extend the capabilities of the LC-encoding method by mitigating the effects of interelectrode capacitance, and thereby increase the count rate capability.

Valentine, K.H.; Kopp, M.K.; Guerrant, G.C.; Harter, J.A.

1982-01-01T23:59:59.000Z