Powered by Deep Web Technologies
Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Panel Discussion: New Directions in Human Reliability Analysis for Oil & Gas, Cybersecurity, Nuclear, and Aviation  

SciTech Connect (OSTI)

This panel will discuss what new directions are necessary to maximize the usefulness of HRA techniques across different areas of application. HRA has long been a part of Probabilistic Risk Assessment in the nuclear industry as it offers a superior standard for risk-based decision-making. These techniques are continuing to be adopted by other industries including oil & gas, cybersecurity, nuclear, and aviation. Each participant will present his or her ideas concerning industry needs followed by a discussion about what research is needed and the necessity to achieve cross industry collaboration.

Harold S. Blackman; Ronald Boring; Julie L. Marble; Ali Mosleh; Najmedin Meshkati

2014-10-01T23:59:59.000Z

2

The BP Oil Spill: One Year Later College Station, September 19 The Mosbacher Institute brought together an expert panel to discuss  

E-Print Network [OSTI]

The BP Oil Spill: One Year Later College Station, September 19 ­ The Mosbacher Institute brought at the Macondo oil well last year. The panel spoke to an audience of some 70 faculty and students at the Bush for the discussion, Jim Griffin reminded the audience that the oil spill that began on April 20, 2010 is the largest

Boas, Harold P.

3

DOE Hydrogen and Fuel Cell Activities Panel Discussion: 2010...  

Broader source: Energy.gov (indexed) [DOE]

DOE Hydrogen and Fuel Cell Activities Panel Discussion: 2010 SAE World Congress DOE Hydrogen and Fuel Cell Activities Panel Discussion: 2010 SAE World Congress Presentation by...

4

DOE Hydrogen and Fuel Cell Activities Panel Discussion: 2010...  

Energy Savers [EERE]

Activities Panel Discussion: 2010 SAE World Congress DOE Hydrogen and Fuel Cell Activities Panel Discussion: 2010 SAE World Congress Presentation by Sunita Satyapal at the 2010...

5

Panel Discussion | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Powerstories onFocusOski Energy LLC Place:FerrySprings,Panda EnergyPanel

6

Security Issues in Data Warehousing and Data Mining: Panel Discussion  

E-Print Network [OSTI]

and mining. Position by Linda Schlipper For most enterprises there is no shortage of data. Operational dataSecurity Issues in Data Warehousing and Data Mining: Panel Discussion Bhavani Thuraisingham Corporation Abstract This paper describes the panel discussion on data warehousing, data mining and security

Lin, Tsau Young

7

Panel Discussion: Career Paths in Energy & Sustainability: Perspective...  

Broader source: Energy.gov (indexed) [DOE]

a.m.-7 p.m. The events include: 11:30 a.m.-2 p.m. Panel Discussion "Career Paths in Energy & Sustainability: Perspectives from Successful Women Professionals," including Dr....

8

Enduring Nuclear Fuel Cycle, Proceedings of a panel discussion  

SciTech Connect (OSTI)

The panel reviewed the complete nuclear fuel cycle in the context of alternate energy resources, energy need projections, effects on the environment, susceptibility of nuclear materials to theft, diversion, and weapon proliferation. We also looked at ethical considerations of energy use, as well as waste, and its effects. The scope of the review extended to the end of the next century with due regard for world populations beyond that period. The intent was to take a long- range view and to project, not forecast, the future based on ethical rationales, and to avoid, as often happens, long-range discussions that quickly zoom in on only the next few decades. A specific nuclear fuel cycle technology that could satisfy these considerations was described and can be applied globally.

Walter, C. E., LLNL

1997-11-18T23:59:59.000Z

9

Law School Admissions Panel Law School representatives will discuss the law school admissions  

E-Print Network [OSTI]

Law School Admissions Panel Law School representatives will discuss the law school admissions process and talk about their respective schools in a panel discussion format. Join us and learn how in Law School Admissions Panel epresentatives will discuss the law school admissions process and talk

Brinkmann, Peter

10

Dying Green A Film Screening and Panel Discussion about Green Burial  

E-Print Network [OSTI]

Dying Green A Film Screening and Panel Discussion about Green Burial March 20, 2014 6:00pm ­ 8:00pm to rest. The "Green Burial" movement is catching on in the U.S., and green cemetery options are now and panel discussion of the award-winning documentary, Dying Green (2011). Panel participants include Joshua

Virginia Tech

11

Panel Discussion: Career Paths in Energy & Sustainability: Perspectives  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartment ofOil's Impact on2005-74LaboratoriesCERCLA Process ProjectPalafrom

12

Journul of Fusion Energy. Yo/. 5. No. 2. 1986 Introduction to Panel Discussions  

E-Print Network [OSTI]

Journul of Fusion Energy. Yo/. 5. No. 2. 1986 -- Introduction to Panel Discussions Whither Fusion Research? Robert L. Hirsch' . An unnamed former fusion program director retired and felt he needed some friend appeared before the major monk for his annual two words, which were, " Room cold." The monk nodded

13

Journal of Fusion Energy, VoL 4, Nos. 2/3, 1985 Panel Discussion  

E-Print Network [OSTI]

Office of Fusion Energy (OFE). One might take as a reasonable assumption that first generation fusionJournal of Fusion Energy, VoL 4, Nos. 2/3, 1985 Panel Discussion Technology Research energy program. Based on the new program plan, the parameters are a broad scientific and technology

Abdou, Mohamed

14

Panel discussion: Lessons learned at The Geysers and the next steps  

SciTech Connect (OSTI)

During the last part of this morning session, we will be discussing joint DOE-industry research and development efforts on The Geysers geothermal field. I have asked five panelists to oversee discussions, three from industry and two from DOE- supported research organizations. They are Paul Hirtz from ThermoChem Inc., Keshav Goyal from Calpine Corporation, Ben Barker from Unocal Corporation Geothermal, Jeff Hulen from the Earth Sciences and Research Institute (ESRI) of the University of Utah, and Collin Williams from the Geological Survey (USGS). As was mentioned earlier during this meeting, up to now DOE has spent about $12.2 million in Geysers research-related projects and another $7 million for the Lake County pipeline. On the other hand, industry has spent large amounts of money to keep The Geysers project going. The discussions will be based on the personal experiences of the Panel members, on what we heard today as well as in previous meetings, and on what we read in the Research Program Update that was distributed as part of the registration package. On the basis of what we learned, we will attempt to identify the joint DOE-Industry Geysers research that should be done in the future.

Lippmann, M.

1996-04-10T23:59:59.000Z

15

Agents, Believabilityand Embodiment in Advanced Learning Environments Introduction to a Panel Discussion  

E-Print Network [OSTI]

Agents, Believabilityand Embodiment in Advanced Learning Environments Introduction to a Panel to ediicatiorial or en- tertuinnierit systenis, iriterjiaces to professional environ- merits, etc., where cin the issues that underlie the introduction of embodied agents in learning environments. Embodied agents appear

Nijholt, Anton

16

PANEL DISCUSSION: Barriers to Fuel Management One of the traditional roles that prescribed fire has played in  

E-Print Network [OSTI]

must complement protection needs and provide a smooth transition to sustained ecosystem managementPANEL DISCUSSION: Barriers to Fuel Management One of the traditional roles that prescribed fire has played in the fire management arena is reduction of hazardous fuel buildups under controlled, well

Standiford, Richard B.

17

"Probes to Saturn and Beyond" Panel Discussion Report IPPW-4, Friday, 30 June 2006  

E-Print Network [OSTI]

by Sushil K. Atreya Department of Atmospheric, Oceanic, and Space Sciences, University of Michigan, Ann 2006) Panel Members: Sushil Atreya (U. Michigan, Chair), Alessandro Atzei (ESTEC), Tibor Balint (JPL. Comparative planetology of the gas giants (Jupiter and Saturn) and the ice giants (Uranus and Neptune

Atreya, Sushil

18

Audience/Panel Discussion: Sites Lesson Learned about Activity-level Work Planning and Control Using EFCOG Work Planning and Control Guideline  

Broader source: Energy.gov [DOE]

Slide Presentation by Donna J. Governor, Deputy Dept Mgr for Planning & Integration, Lawrence Livermore National Laboratory. Lawrence Livermore National Laboratory work planning and control lessons learned and audience/panel discussion on site's lessons learned about Activity-level Work Planning and Control using EFCOG Work Planning and Control Guideline Document.

19

Use of bark-derived pyrolysis oils ass a phenol substitute in structural panel adhesives  

SciTech Connect (OSTI)

The main objective of this program was to pilot the world's first commercial-scale production of an acceptable phenol formaldehyde (PF) resin containing natural resin (NR) ingredients, for use as an adhesive in Oriented-Strand Board (OSB) and plywood panel products. Natural Resin products, specifically MNRP are not lignin ''fillers''. They are chemically active, natural phenolics that effectively displace significant amounts of phenol in PF resins, and which are extracted from bark-derived and wood-derived bio-oils. Other objectives included the enhancement of the economics of NR (MNRP) production by optimizing the production of certain Rapid Thermal Processing (RTP{trademark}) byproducts, particularly char and activated carbon. The options were to activate the char for use in waste-water and/or stack gas purification. The preliminary results indicate that RTP{trademark} carbon may ultimately serve as a feedstock for activated carbon synthesis, as a fuel to be used within the wood product mill, or a fuel for an electrical power generating facility. Incorporation of the char as an industrial heat source for use in mill operations was L-P's initial intention for the carbon, and was also of interest to Weyerhaeuser as they stepped into in the project.

Louisiana Pacific Corp

2004-03-01T23:59:59.000Z

20

Proceedings of the CMP Electric Arc Furnace Dust Treatment Symposium IV: A Summary of the Technical Presentations and Panel Discussion from the January 25, 1994 Symposium  

SciTech Connect (OSTI)

This report contains the talks presented at the symposium on the present state of regulations, origin and suppression of EAF dust formation, a scientific look at EAF dust treatment, commercial and developing technologies, and the dezincing of scrap. Questions and answers following the presentations as well as those originated during the panel discussion are covered in the report. A brief description of some treatment processes is also included.

None

1994-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

UC Cooperative Extension sensory analysis panel enhances the quality of California olive oil  

E-Print Network [OSTI]

assessment of virgin olive oil — computer program Ex- celP. 1999. Quality of virgin olive oil as influenced by originArbequina and Arbosana olive oils get a very high rating

Vossen, Paul; Kicenik Devarenne, Alexandra

2011-01-01T23:59:59.000Z

22

Interconnection Panel  

Broader source: Energy.gov [DOE]

Presentation—given at at the Fall 2012 Federal Utility Partnership Working Group (FUPWG) meeting—discusses the interconnection panel, including an overview of the generation interconnection process (GIP), and interconnection agreements and their terms.

23

Athena SWAN Award Submission Feedback November 2012 The following feedback is a summary of the panel's discussion of the submission. It is intended to  

E-Print Network [OSTI]

future submissions; there is no requirement to provide a formal response. Name of institution University of the institution's achievements but they felt there was a little too much focus on the past with insufficient intent for the future, or focus on STEMM subjects. The self-assessment process The panel felt

Sussex, University of

24

Panel discussion: The Clean Air Act: It`s impact on the coal testing industry The act itself: A summary and overview  

SciTech Connect (OSTI)

The Clean Air Act was first enacted in 1970. It was re-enacted in both 1977 and 1991. The original act covered air quality standards (NAAQS) for SO{sub 2}, NO{sub x}, CO and O{sub 3}. Pb was added in 1978 by court order and particulate matter (TSP) was added in 1987. A discussion of the impact of the Clean Air Act on the coal industry is presented.

King, R.

1995-08-01T23:59:59.000Z

25

Overview of seismic panel activities  

SciTech Connect (OSTI)

In January 1991, the DOE-EM appointed a Seismic Panel to develop seismic criteria that can be used for evaluation of underground storage tanks containing high level radioactive wastes. The Panel expects to issue the first draft of the criteria report in January 1992. This paper provides an overview of the Panel's activities and briefly discusses the criteria. 3 refs.

Bandyopadhyay, K.K.

1991-01-01T23:59:59.000Z

26

OpenEI Community - Panel Discussion  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth'sOklahoma/Geothermal < Oklahoma JumpcommunityIdeasSpurs Entrepreneurship

27

UESC Frequently Asked Questions Panel Discussion  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of EnergyTheTwo New Energyof Energy8, 2012 UDACBestDataEnablingEnergy

28

Oil  

E-Print Network [OSTI]

Waste oils offer a tremendous recycling potential. An important, dwindling natural resource of great economic and industrial value, oil products are a cornerstone of our modern industrial society. Petroleum is processed into a wide variety of products: gasoline, fuel oil, diesel oil, synthetic rubber, solvents, pesticides, synthetic fibres, lubricating oil, drugs and many more ' (see Figure 1 1. The boilers of Amercian industries presently consume about 40 % of the used lubricating oils collected. In Ontario, the percentage varies from 20 to 30%. Road oiling is the other major use of collected waste oils. Five to seven million gallons (50-70 % of the waste oil col1ected)is spread on dusty Ontario roads each summer. The practice is both a wasteful use of a dwindling resource and an environmental hazard. The waste oil, with its load of heavy metals, particularly lead, additives including dangerous polynuclear aromatics and PCBs, is carried into the natural environment by runoff and dust to contaminate soils and water courses.2 The largest portion of used oils is never collected, but disappears into sewers, landfill sites and backyards. In Ontario alone, approximately 22 million gallons of potentially recyclable lube oil simply vanish each year. While oil recycling has ad-114 Oil

unknown authors

29

Venice Sustainability Advisory Panel  

E-Print Network [OSTI]

Venice Sustainability Advisory PanelFINAL REPORT Venice Sustainability Advisory Panel FinalInvestigator The Venice Sustainability Advisory Panel (

2009-01-01T23:59:59.000Z

30

Buildings of the Future Research Project Launch and Virtual Panel...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Buildings of the Future Research Project Launch and Virtual Panel Discussion on Building Technology Trends Buildings of the Future Research Project Launch and Virtual Panel...

31

Geothermal Technologies Program Blue Ribbon Panel Recommendations  

Broader source: Energy.gov [DOE]

This report describes the recommendations of the Geothermal Blue Ribbon Panel, a panel of geothermal experts assembled in March 2011 for a discussion on the future of geothermal energy in the U.S.

32

Moving Canadian Oil to Markets: The Economic Dimensions  

E-Print Network [OSTI]

Moving Canadian Oil to Markets: The Economic Dimensions Panel Discussion Organized by the Schulich.policyschool.ca #12;Petroleum, a key economic driver · Investment - $61 B invested in 2012; over 1/3 of total business investment in Canada · Production and Value Added ­ Direct GDP or value added typically over $115 B per year

Calgary, University of

33

SSRL- Proposal Review Panel  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Stanford Synchrotron Radiation Lab search Go an error occurred while processing this directive Proposal Review Panel Sub Panels Structural Molecular Biology & Biophysics...

34

For discussion purposes only Biofuel and Poverty Nexus  

E-Print Network [OSTI]

Jatropha (marginal land) Palm oil Coconut Pongamia b) Bioethanol Sweet sorghum Cassava #12;For discussion

35

Analysis of 3-panel and 4-panel microscale ionization sources  

SciTech Connect (OSTI)

Two designs of a microscale electron ionization (EI) source are analyzed herein: a 3-panel design and a 4-panel design. Devices were fabricated using microelectromechanical systems technology. Field emission from carbon nanotube provided the electrons for the EI source. Ion currents were measured for helium, nitrogen, and xenon at pressures ranging from 10{sup -4} to 0.1 Torr. A comparison of the performance of both designs is presented. The 4-panel microion source showed a 10x improvement in performance compared to the 3-panel device. An analysis of the various factors affecting the performance of the microion sources is also presented. SIMION, an electron and ion optics software, was coupled with experimental measurements to analyze the ion current results. The electron current contributing to ionization and the ion collection efficiency are believed to be the primary factors responsible for the higher efficiency of the 4-panel microion source. Other improvements in device design that could lead to higher ion source efficiency in the future are also discussed. These microscale ion sources are expected to find application as stand alone ion sources as well as in miniature mass spectrometers.

Natarajan, Srividya; Parker, Charles B.; Glass, Jeffrey T. [Department of Electrical and Computer Engineering, Duke University, Durham, North Carolina 27708 (United States); Piascik, Jeffrey R.; Gilchrist, Kristin H. [Center for Materials and Electronic Technologies, RTI International, Research Triangle Park, North Carolina 27709 (United States); Stoner, Brian R. [Department of Electrical and Computer Engineering, Duke University, Durham, North Carolina 27708 (United States); Center for Materials and Electronic Technologies, RTI International, Research Triangle Park, North Carolina 27709 (United States)

2010-06-15T23:59:59.000Z

36

Panel Organization 1. Panel on Structural Geology & Geoengineering  

E-Print Network [OSTI]

Appendix A Panel Organization 1. Panel on Structural Geology & Geoengineering Chair: Dr. Clarence R Technical Exchange (open) Panel on Structural Geology & Geoengineering Denver, Colorado Topic: DOE & Performance Analysis and the Panel on Structural Geology & Geoengineering Denver, Colorado Topic: Repository

37

Session 6 - Environmentally Concerned Public Sector Panel Discussion...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Documents & Publications The Diesel Engine Powering Light-Duty Vehicles: Today and Tomorrow EPA Mobile Source Rule Update Urea SCR Durability Assessment for Tier 2 Light-Duty Truck...

38

LOW-LEVEL RADIATION HEALTH EFFECTS: PROGRAMS AND PANEL DISCUSSION  

E-Print Network [OSTI]

accident. The report of the Soviet Union to the International Atomic Energy Agency experts' meeting plutonium had been produced in reactors and separated for bomb production for -40 yr (Ref. 1. The reduction was presumably due to the reduced effects at low dose rate. THE DATA SETS In the former USSR

Shlyakhter, Ilya

39

DOE Hydrogen and Fuel Cell Activities Panel Discussion  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTieCelebratePartnersDepartment DOEDepartment of Energy Attendees1

40

UESC Frequently Asked Questions Panel Discussion | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from theDepartment of Dept. of Energy,UCOR Contract & FeeUESC Frequently Asked

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

for doubling solar panel  

E-Print Network [OSTI]

An outline for doubling solar panel efficiency C o l o ra do S c ho o l of M i ne s Ma g a z i ne Take a look at a solar panel on a sunny Colorado day and, if you're like most people, you won't see physics professor and solar energy researcher, who admits to checking out his panels and their energy

42

Lighting Technology Panel  

Broader source: Energy.gov [DOE]

Presentation covers the Lighting Technology Panel for the Federal Utility Partnership Working Group (FUPWG) meeting, held on November 18-19, 2009. 

43

Solar reflection panels  

DOE Patents [OSTI]

A solar collector comprising a glass mirror, and a composite panel, wherein the back of the mirror is affixed to a front surface of the composite panel. The composite panel comprises a front sheet affixed to a surface of a core material, preferably a core material comprising a honeycomb structure, and a back sheet affixed to an opposite surface of the core material. The invention may further comprise a sealing strip, preferably comprising EPDM, positioned between the glass mirror and the front surface of the composite panel. The invention also is of methods of making such solar collectors.

Diver, Jr., Richard B. (Albuquerque, NM); Grossman, James W. (Albuquerque, NM); Reshetnik, Michael (Boulder, CO)

2006-07-18T23:59:59.000Z

44

Flexible optical panel  

DOE Patents [OSTI]

A flexible optical panel includes laminated optical waveguides, each including a ribbon core laminated between cladding, with the core being resilient in the plane of the core for elastically accommodating differential movement thereof to permit winding of the panel in a coil.

Veligdan, James T. (Manorville, NY)

2001-01-01T23:59:59.000Z

45

My Favorite OLED Panel  

Energy Savers [EERE]

My Favorite OLED Panel Basar Erdener Sun and Snow Photo Courtesy 2009-2015 Kvikken 2 Sizable 3 Sizable Photo Courtesy Printmeneer on Etsy 4 5 Shapeable Photo Courtesy Dia...

46

Gas filled panel insulation  

DOE Patents [OSTI]

A structural or flexible highly insulative panel which may be translucent, is formed from multi-layer polymeric material in the form of an envelope surrounding a baffle. The baffle is designed so as to minimize heat transfer across the panel, by using material which forms substantially closed spaces to suppress convection of the low conductivity gas fill. At least a portion of the baffle carries a low emissivity surface for suppression of infrared radiation. 18 figures.

Griffith, B.T.; Arasteh, D.K.; Selkowitz, S.E.

1993-12-14T23:59:59.000Z

47

More from Discussions of Presentations On biological `disequilibrium' as a  

E-Print Network [OSTI]

of the northern hemisphere. What about alternative (renewable) energy? We discussed briefly how solar panels aren magnetic pole, expanding/contracting atmosphere) #12;From Wapedia The Gaia hypothesis was first

Toohey, Darin W.

48

Oven wall panel construction  

DOE Patents [OSTI]

An oven roof or wall is formed from modular panels, each of which comprises an inner fabric and an outer fabric. Each such fabric is formed with an angle iron framework and somewhat resilient tie-bars or welded at their ends to flanges of the angle irons to maintain the inner and outer frameworks in spaced disposition while minimizing heat transfer by conduction and permitting some degree of relative movement on expansion and contraction of the module components. Suitable thermal insulation is provided within the module. Panels or skins are secured to the fabric frameworks and each such skin is secured to a framework and projects laterally so as slidingly to overlie the adjacent frame member of an adjacent panel in turn to permit relative movement during expansion and contraction.

Ellison, Kenneth (20 Avondale Cres., Markham, CA); Whike, Alan S. (R.R. #1, Caledon East, both of Ontario, CA)

1980-04-22T23:59:59.000Z

49

Panel 3 - characterization  

SciTech Connect (OSTI)

The task of this panel was to identify and prioritize needs in the area of characterization of diamond and diamond-like-carbon (DLC) films for use in the transportation industry. Until recent advances in production of inexpensive films of diamonds and DLC, it was not feasible that these materials could be mass produced. The Characterization Panel is restricting itself to identifying needs in areas that would be most useful to manufacturers and users in producing and utilizing diamond and DLC coatings in industry. These characterization needs include in-situ monitoring during growth, relation of structure to performance, and standards and definitions.

Erck, R.A.; Erdemir, A.; Janghsing Hsieh; Lee, R.H.; Xian Zheng Pan; Deming Shu [Argonne National Lab., IL (United States); Feldman, A. [National Inst. of Standards and Technology, Gaithersburg, MD (United States); Glass, J.T. [North Carolina State Univ., Raleigh (United States); Kleimer, R. [Coors Ceramics Co., Golden, CO (United States); Lawton, E.A. [JPL/Caltech, Pasadena, CA (United States); McHargue, C.J. [Univ. of Tennessee, Knoxville (United States)

1993-01-01T23:59:59.000Z

50

To discuss illicit nuclear trafficking  

SciTech Connect (OSTI)

The Illicit nuclear trafficking panel was conducted at the 4th Annual INMM workshop on Reducing the Risk from Radioactive and Nuclear Materials on February 2-3, 2010 in Washington DC. While the workshop occurred prior to the Nuclear Security Summit, April 12-13 2010 in Washington DC, some of the summit issues were raised during the workshop. The Communique of the Washington Nuclear Security Summit stated that 'Nuclear terrorism is one of the most challenging threats to international security, and strong nuclear security measures are the most effective means to prevent terrorists, criminals, or other unauthorized actors from acquiring nuclear materials.' The Illicit Trafficking panel is one means to strengthen nuclear security and cooperation at bilateral, regional and multilateral levels. Such a panel promotes nuclear security culture through technology development, human resources development, education and training. It is a tool which stresses the importance of international cooperation and coordination of assistance to improve efforts to prevent and respond to incidents of illicit nuclear trafficking. Illicit trafficking panel included representatives from US government, an international organization (IAEA), private industry and a non-governmental organization to discuss illicit nuclear trafficking issues. The focus of discussions was on best practices and challenges for addressing illicit nuclear trafficking. Terrorism connection. Workshop discussions pointed out the identification of terrorist connections with several trafficking incidents. Several trafficking cases involved real buyers (as opposed to undercover law enforcement agents) and there have been reports identifying individuals associated with terrorist organizations as prospective plutonium buyers. Some specific groups have been identified that consistently search for materials to buy on the black market, but no criminal groups were identified that specialize in nuclear materials or isotope smuggling. In most cases, sellers do not find legitimate buyers; however, there have been specific cases where sellers did find actual terrorist group representatives. There appears to be a connection between terrorist groups engaged in trafficking conventional arms and explosives components that are also looking for both nuclear materials and radioisotopes. Sale opportunities may create additional demand for such materials. As we can observe from Figure 1, many cases in the mid-90s involved kilogram quantities of material. There were smaller amounts of material moved in 2001, 2003 and 2006. While we have seen less trafficking cases involving PujHEU in recent years, the fact that it continues at all is troubling. The trafficking cases can be presented through their life cycle: Diversion of materials leads to Trafficker and then to Terrorist/Proliferator. Most of the information we have in trafficking cases is on the Trafficker. In 16 cases reported by the IAEA, there are 10 prosecutions of the involved trafficker. However, there are no confirmed diversions of material recorded in any of the 18 seizures. Most seizures were sting operations performed by law enforcement or security agents with no actual illicit end-user involved.

Balatsky, Galya I [Los Alamos National Laboratory; Severe, William R [Los Alamos National Laboratory; Wallace, Richard K [Los Alamos National Laboratory

2010-01-01T23:59:59.000Z

51

Industry Partners Panel  

Broader source: Energy.gov [DOE]

Industry Panel presenters include: Michael G. Andrew, Director - Academic and Technical Programs, Advanced Products and Materials, Johnson Controls Power Solutions Michael A. Fetcenko, Vice President and Managing Director, BASF Battery Materials – Ovonic, BASF Corporation Adam Kahn, Founder and CEO, AKHAN Technologies, Inc. Stephen E. Zimmer, Executive Director, United States Council for Automotive Research (USCAR)

52

PANEL: DDI and Metadata from the Researcher's Perspective  

E-Print Network [OSTI]

This was a panel discussion on lifecycle metadata issues from the researcher's perspective. A lot of focus has been placed on how to integrate DDI into large data collection processes in the world of official statistics, ...

Thomas, Wendy; Brown, J. Christopher; Nakao, Ron

2013-04-02T23:59:59.000Z

53

Energy Materials and Processes, An EMSL Science Theme Advisory Panel Workshop  

SciTech Connect (OSTI)

The report summarizes discussions at the Energy Materials and Process EMSL Science Theme Advisory Panel Workshop held July 7-8, 2014.

Burk, Linda H.

2014-12-16T23:59:59.000Z

54

2011 Strategic Capital Discussions  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Agenda Letter announcing September 2011 Strategic Discussions Fact Sheet Capital Follow Ups Background Information September 19th Overview Power Capital Transmission Capital...

55

Photovoltaic panel clamp  

DOE Patents [OSTI]

A photovoltaic panel clamp includes an upper and lower section. The interface between the assembled clamp halves and the module edge is filled by a flexible gasket material, such as EPDM rubber. The gasket preferably has small, finger like protrusions that allow for easy insertion onto the module edge while being reversed makes it more difficult to remove them from the module once installed. The clamp includes mounting posts or an integral axle to engage a bracket. The clamp also may include a locking tongue to secure the clamp to a bracket.

Mittan, Margaret Birmingham (Oakland, CA); Miros, Robert H. J. (Fairfax, CA); Brown, Malcolm P. (San Francisco, CA); Stancel, Robert (Loss Altos Hills, CA)

2012-06-05T23:59:59.000Z

56

Photovoltaic panel clamp  

DOE Patents [OSTI]

A photovoltaic panel clamp includes an upper and lower section. The interface between the assembled clamp halves and the module edge is filled by a flexible gasket material, such as EPDM rubber. The gasket preferably has small, finger like protrusions that allow for easy insertion onto the module edge while being reversed makes it more difficult to remove them from the module once installed. The clamp includes mounting posts or an integral axle to engage a bracket. The clamp also may include a locking tongue to secure the clamp to a bracket.

Brown, Malcolm P.; Mittan, Margaret Birmingham; Miros, Robert H. J.; Stancel, Robert

2013-03-19T23:59:59.000Z

57

Concentrating photovoltaic solar panel  

DOE Patents [OSTI]

The present invention relates to photovoltaic power systems, photovoltaic concentrator modules, and related methods. In particular, the present invention features concentrator modules having interior points of attachment for an articulating mechanism and/or an articulating mechanism that has a unique arrangement of chassis members so as to isolate bending, etc. from being transferred among the chassis members. The present invention also features adjustable solar panel mounting features and/or mounting features with two or more degrees of freedom. The present invention also features a mechanical fastener for secondary optics in a concentrator module.

Cashion, Steven A; Bowser, Michael R; Farrelly, Mark B; Hines, Braden E; Holmes, Howard C; Johnson, Jr., Richard L; Russell, Richard J; Turk, Michael F

2014-04-15T23:59:59.000Z

58

Proposal Study Panels  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for Plutonium CleanupProposal Study Panels Print

59

Proposal Study Panels  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for Plutonium CleanupProposal Study Panels

60

Proposal Study Panels  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for Plutonium CleanupProposal Study PanelsProposal

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Proposal Study Panels  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16HamadaBaO/Al2O3 leanProposal Study Panels Print Two

62

Proposal Study Panels  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16HamadaBaO/Al2O3 leanProposal Study Panels Print

63

Proposal Study Panels  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16HamadaBaO/Al2O3 leanProposal Study Panels

64

Thermal insulations using vacuum panels  

DOE Patents [OSTI]

Thermal insulation vacuum panels are formed of an inner core of compressed low thermal conductivity powders enclosed by a ceramic/glass envelope evaluated to a low pressure.

Glicksman, Leon R. (Lynnfield, MA); Burke, Melissa S. (Pittsburgh, PA)

1991-07-16T23:59:59.000Z

65

Facilities Services Overview & Discussion  

E-Print Network [OSTI]

& Finance Facilities Services Director: Jeff Butler Human Resources Administrative Services Engineering) Environmental Services Morrison (3) Admin Services Evans (1) Human Resources Engineering (4) ·EngineeringFacilities Services Overview & Discussion Jeff Butler Director ­ Facilities Services November 2011

Maxwell, Bruce D.

66

Plane and parabolic solar panels  

E-Print Network [OSTI]

We present a plane and parabolic collector that absorbs radiant energy and transforms it in heat. Therefore we have a panel to heat water. We study how to increment this capture of solar beams onto the panel in order to increase its efficiency in heating water.

J. H. O. Sales; A. T. Suzuki

2009-05-14T23:59:59.000Z

67

Plane and parabolic solar panels  

E-Print Network [OSTI]

We present a plane and parabolic collector that absorbs radiant energy and transforms it in heat. Therefore we have a panel to heat water. We study how to increment this capture of solar beams onto the panel in order to increase its efficiency in heating water.

Sales, J H O

2009-01-01T23:59:59.000Z

68

OIL SHALE  

E-Print Network [OSTI]

Seyitömer, Himmeto?lu and Hat?lda? oil shale deposits. The results demonstrate that these oil shales are

Fields (in-situ Combustion Approach; M. V. Kök; G. Guner; S. Bagci?

69

Unit Testing Discussion C  

E-Print Network [OSTI]

Unit Testing Discussion C #12;Unit Test public Method is smallest unit of code Input/output transformation Test if the method does what it claims Not exactly black box testing #12;Test if (actual result Expected Computed Input #12;Functionality Computation ­ Easy to test Time based Asynchronous interaction

Massachusetts at Amherst, University of

70

Carbon Additionality: Discussion Paper  

E-Print Network [OSTI]

ahead, and identifying the carbon pools and other green house gas emissions sources and savings coveredCarbon Additionality: A review Discussion Paper Gregory Valatin November 2009 Forest Research. Voluntary Carbon Standards American Carbon Registry Forest Carbon Project Standard (ACRFCPS) 27 Carbon

71

Panelized wall system with foam core insulation  

DOE Patents [OSTI]

A wall system includes a plurality of wall members, the wall members having a first metal panel, a second metal panel, and an insulating core between the first panel and the second panel. At least one of the first panel and the second panel include ridge portions. The insulating core can be a foam, such as a polyurethane foam. The foam can include at least one opacifier to improve the k-factor of the foam.

Kosny, Jan (Oak Ridge, TN); Gaskin, Sally (Houston, TX)

2009-10-20T23:59:59.000Z

72

Essays on oil price shocks and financial markets   

E-Print Network [OSTI]

This thesis is composed of three chapters, which can be read independently. The first chapter investigates how oil price volatility affects the investment decisions for a panel of Japanese firms. The model is estimated ...

Wang, Jiayue

2012-06-26T23:59:59.000Z

73

Solar Panel Anomaly Detection and Classification.  

E-Print Network [OSTI]

??The number of solar panels deployed worldwide has rapidly increased. Solar panels are often placed in areas not easily accessible. It is also difficult for… (more)

Hu, Bo

2012-01-01T23:59:59.000Z

74

Solar Decathlon Technology Spotlight: Structural Insulated Panels...  

Broader source: Energy.gov (indexed) [DOE]

Decathlon Technology Spotlight: Structural Insulated Panels Solar Decathlon Technology Spotlight: Structural Insulated Panels September 20, 2011 - 7:13am Addthis These structural...

75

Straight Vegetable Oil as a Diesel Fuel?  

SciTech Connect (OSTI)

Two-page fact sheet discussing the pitfalls of using straight vegetable oil (SVO) as a transportation fuel.

Not Available

2006-04-01T23:59:59.000Z

76

TWRS vadose zone contamination issue expert panel report  

SciTech Connect (OSTI)

When members were first canvassed for participation in the Vadose Zone Expert Panel the stated purpose for convening the Panel was to review a controversial draft report, the SX Tank Farm Report. This report was produced by a DOE Grand Junction Project Office (GJPO) contractor, RUST Geotech, now MACTEC-ERS, for the DOE Richland Office (DOERL). Three meetings were planned for June, July and August, 1995 to review the draft report and to complete a Panel report by mid-September. The Expert Panel has found its efforts confounded by various non-technical issues. The Expert Panel has chosen to address some of the non-technical issues in this Preface rather than to dilute the technical discussion that follows in the body of this independent expert panel status report (Panel Report). Rather than performing a straightforward manuscript review, the Panel was asked to resolve conflicting interpretations of gamma-ray logging measurements performed in vadose zone boreholes (drywells) surrounding the high-level radioactive wastes of the SX tank farm. There are numerous and complex technical issues that must be evaluated before the vertical and radial extent of contaminant migration at the SX tank farm can be accurately assessed. When the Panel first met in early June, 1996, it quickly became apparent that the scientific and technical issues were obscured by policy and institutional affairs which have polarized discussion among various segments of the Hanford organization. This situation reflects the kinds of institutional problems described separately in reports by the National Research Council of the National Academy of Sciences (NAS/NRC), The Hanford Tanks Environmental Impacts and Policy Choices and BmTiers to Science: Technical Management of the Department of Energy Environmental Remediation Program. The Vadose Zone Characterization Program, appears to be caught between conflicting pressures and organizational mandates, some imposed from outside DOE-RL and some self-imposed. The institutional problems they encountered include having both Tank Waste Remediation System (TWRS), the parent organization of the Vadose Zone Characterization Program and Environmental Restoration (ER), each under different regulatory controls and different organizational units, seeking to defend the status quo and discount many of the Panel`s conclusions and recommendations. The results presented in the SX Tank Farm Report, especially the visualizations, have created concern in the public sector, both on a local, personal level and on a national political level.

Shafer, D.S.

1997-05-01T23:59:59.000Z

77

Exascale Workshop Panel Report Meeting  

SciTech Connect (OSTI)

The Exascale Review Panel consists of 12 scientists and engineers with experience in various aspects of high-performance computing and its application, development, and management. The Panel hear presentations by several representatives of the workshops and town meetings convened over the past few years to examine the need for exascale computation capability and the justification for a U.S. Department of Energy (DOE) program to develop such capability. This report summarizes information provided by the presenters and substantial written reports to the Panel in advance of the meeting in Washington D.C. on January 19-20, 2010. The report also summarizes the Panel's conclusions with regard to the justification of a DOE-led exascale initiative.

Khaleel, Mohammad A.

2010-07-01T23:59:59.000Z

78

Blue Ribbon Panel Recommendations Report  

Broader source: Energy.gov [DOE]

The Department of Energy's Geothermal Technologies Office (formerly Geothermal Technologies Program) assembled a geothermal Blue Ribbon Panel on March 22-23, 2011 in Albuquerque, New Mexico for a...

79

One Panel One Roof, DOE Powering Solar Workforce | Department...  

Broader source: Energy.gov (indexed) [DOE]

One Panel One Roof, DOE Powering Solar Workforce One Panel One Roof, DOE Powering Solar Workforce...

80

Effect of a Radiant Panel Cooling System on Indoor Air Quality of a Conditioned Space  

E-Print Network [OSTI]

This paper discusses the effect of a radiant cooling panel system on an indoor air quality (IAQ) of a conditioned space. In this study, ceiling radiant cooling panel, mechanical ventilation with fan coil unit (FCU) and 100% fresh air are used...

Mohamed, E.; Abdalla, K. N.

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Favorable conditions noted for Australia shale oil  

SciTech Connect (OSTI)

After brief descriptions of the Rundle, Condor, and Stuart/Kerosene Creek oil shale projects in Queensland, the competitive advantages of oil shale development and the state and federal governments' attitudes towards an oil shale industry in Australia are discussed. It is concluded that Australia is the ideal country in which to start an oil shale industry.

Not Available

1986-09-01T23:59:59.000Z

82

Project DEEP STEAM: fourth meeting of the technical advisory panel, Albuquerque, NM, November 1980  

SciTech Connect (OSTI)

The Fourth Project DEEP STEAM Technical Advisory Panel Meeting was held on 5 and 6 November 1980 in Albuquerque, New Mexico, to review the status of project DEEP STEAM. This Proceedings, following the order of the meeting, is divided into five main sections: the injection string modification program, the downhole steam generator program, supporting activities, field testing, and the Advisory Panel recommendations and discussion. Each of the 17 presentations is summarized, and a final Discussion section has been added, when needed, for inclusion of comments and replies related to specific presentations. Finally, the Advisory Panel recommendations and the ensuing discussion are summarized in the closing section.

Fox, R.L.; Donaldson, A.B.; Eisenhawer, S.W.; Hart, C.M.; Johnson, D.R.; Mulac, A.J.; Wayland, J.R.; Weirick, L.J.

1981-07-01T23:59:59.000Z

83

Plasma Panel Based Radiation Detectors  

SciTech Connect (OSTI)

The plasma panel sensor (PPS) is a gaseous micropattern radiation detector under current development. It has many operational and fabrication principles common to plasma display panels (PDPs). It comprises a dense matrix of small, gas plasma discharge cells within a hermetically sealed panel. As in PDPs, it uses non-reactive, intrinsically radiation-hard materials such as glass substrates, refractory metal electrodes, and mostly inert gas mixtures. We are developing these devices primarily as thin, low-mass detectors with gas gaps from a few hundred microns to a few millimeters. The PPS is a high gain, inherently digital device with the potential for fast response times, fine position resolution (< 50 m RMS) and low cost. In this paper we report here on prototype PPS experimental results in detecting betas, protons and cosmic muons, and we extrapolate on the PPS potential for applications including detection of alphas, heavy-ions at low to medium energy, thermal neutrons and X-rays.

Friedman, Dr. Peter S. [Integrated Sensors, LLC; Varner Jr, Robert L [ORNL; Ball, Robert [University of Michigan; Beene, James R [ORNL; Ben Moshe, M. [Tel Aviv University; Benhammou, Yan [Tel Aviv University; Chapman, J. Wehrley [University of Michigan; Etzion, E [Tel Aviv University; Ferretti, Claudio [University of Michigan; Bentefour, E [Ion Beam Applications; Levin, Daniel S. [University of Michigan; Moshe, M. [Tel Aviv University; Silver, Yiftah [Tel Aviv University; Weaverdyck, Curtis [University of Michigan; Zhou, Bing [University of Michigan

2013-01-01T23:59:59.000Z

84

Discussions  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Power Basics (The followingDirect Energy Services Place: MarylandServices

85

Peg supported thermal insulation panel  

DOE Patents [OSTI]

A thermal insulation panel which is lightweight, load bearing, accommodates thermal stress, and has excellent high temperature insulation capability comprising high performance insulation between thin metal walls supported by high density, high strength glass pegs made in compliance with specified conditions of time, temperature and pressure.

Nowobilski, Jeffert J. (Orchard Park, NY); Owens, William J. (Kenmore, NY)

1985-01-01T23:59:59.000Z

86

Peg supported thermal insulation panel  

DOE Patents [OSTI]

A thermal insulation panel which is lightweight, load bearing, accommodates thermal stress, and has excellent high temperature insulation capability comprises high performance insulation between thin metal walls supported by high density, high strength glass pegs made in compliance with specified conditions of time, temperature and pressure. 2 figs.

Nowobilski, J.J.; Owens, W.J.

1985-04-30T23:59:59.000Z

87

Canadian oil market review shows growing influence of heavy oil and bitumen  

SciTech Connect (OSTI)

Canadian oil demand and consumption, crude oil received at refineries, oil well productivity including shut-in production, and exports and imports are discussed. Both light and heavy oil, natural gas, and bitumen are included in the seasonally-adjusted data presented.

Not Available

1986-09-01T23:59:59.000Z

88

Minutes of the Tank Waste Science Panel meeting January 12--13, 1993  

SciTech Connect (OSTI)

The eight meeting of the Tank Waste Science Panel (Science Panel) was convened January 12, 1993 in Richland, Washington. A list of attendees at this meeting is provided in Appendix A. Appendix B is the agenda prepared for the meeting. It was not strictly followed. The meeting focused on the presentation and discussion of recent information and results obtained from studies conducted to understand flammable gas released and ferrocyanide content behavior in Hanford waste tanks. The Science Panel discussed work performed at Pacific Northwest Laboratoy PNL, Westinghouse Hanford Company, Florida State University, and Fauske Associates. A number of recommendations and observations were made.

Strachan, D.M. [comp.] [Pacific Northwest Lab., Richland, WA (United States); Schulz, W.W. [comp.] [Schulz (W.W.), Albuquerque, New Mexico (United States)

1993-10-01T23:59:59.000Z

89

Total System Performance Assessment Peer Review Panel  

Broader source: Energy.gov [DOE]

Total System Performance Assessment (TSPA) Peer Review Panel for predicting the performance of a repository at Yucca Mountain.

90

Inside the White House: Solar Panels  

Broader source: Energy.gov [DOE]

Go inside the White House and learn about the installation of solar panels on the roof of the residence.

91

What political discussion means and how do the French and (French speaking) Belgians deal with it.  

E-Print Network [OSTI]

1 What political discussion means and how do the French and (French speaking) Belgians deal with it.duchesne@sciences-po.fr - florence.haegel@sciences-po.fr Paper prepared for the EPOP Conference 2008 (Manchester) Panel: Political Discussion and Political Deliberation in a Comparative Perspective A public discussion on European

Paris-Sud XI, Université de

92

What political discussion means and how do the French and (French speaking) Belgians deal with it.  

E-Print Network [OSTI]

What political discussion means and how do the French and (French speaking) Belgians deal with it.duchesne@sciences-po.fr - florence.haegel@sciences-po.fr Paper prepared for the EPOP Conference 2008 (Manchester) Panel: Political Discussion and Political Deliberation in a Comparative Perspective A public discussion on European

Paris-Sud XI, Université de

93

Oil shale: The environmental challenges III  

SciTech Connect (OSTI)

This book presents the papers of a symposium whose purpose was to discuss the environmental and socio-economic aspects of oil shale development. Topics considered include oil shale solid waste disposal, modeling spent shale disposal, water management, assessing the effects of oil shale facilities on water quality, wastewater treatment and use at oil shale facilities, potential air emissions from oil shale retorting, the control of air pollutant emissions from oil shale facilities, oil shale air emission control, socioeconomic research, a framework for mitigation agreements, the Garfield County approach to impact mitigation, the relationship of applied industrial hygiene programs and experimental toxicology programs, and industrial hygiene programs.

Petersen, K.K.

1983-01-01T23:59:59.000Z

94

Buildings of the Future Research Project Launch and Virtual Panel Discussion on Building Technology Trends  

Broader source: Energy.gov [DOE]

Learn more about the DOE's Buildings of the Future Project. Buildings will no longer be passive objects that consume resources, but rather active participants engaged in the energy system and our community.

95

Panel Discussion: The SunShot Initiative: The Future is Bright | Department  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d F SSalesOE0000652 Srivastava,Pacific1of PageHYDROGEN H 25Energyof

96

July 24, 2009, Event Flyer, Agenda, Panel Discussion Topics, and Speakers' Biographies  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from theDepartment ofEnergy.pdfApplications: Heating CoolingJanuary 2009

97

Session 6 - Environmentally Concerned Public Sector Panel Discussion "The  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage » SearchEnergyDepartment of EnergyLight-Duty Diesel In America?" |

98

DOE Hydrogen and Fuel Cell Activities Panel Discussion: 2010 SAE World  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: Top FiveDepartmentfor06/2015)09 I. Steps Taken5 DOEPipeline R&DCongress |

99

Panel 4 - applications to transportation  

SciTech Connect (OSTI)

The aim of this group was to compile a listing of current and anticipated future problem areas in the transportation industry where the properties of diamond and DLC films make them especially attractive and where the panel could strongly endorse the establishment of DOE/Transportation Industry cooperative research efforts. This section identifies the problem areas for possible applications of diamond/DLC technology and presents indications of current approaches to these problems.

Nichols, F. [Argonne National Lab., IL (United States); Au, J. [Sundstrand Aerospace, Rockford, IL (United States); Bhattacharya, R. [Universal Energy Systems, Inc., Dayton, OH (United States); Bhushan, B. [Ohio State Univ., Columbus (United States); Blunier, D. [Caterpillar, Inc., Peoria, IL (United States); Boardman, B. [Deere & Co., Moline, IL (United States); Brombolich, L. [Compu-Tec Engineering, Chesterfield, MO (United States); Davidson, J. [Vanderbilt Univ., Nashville, TN (United States); Graham, M. [Northwestern Univ., Evanston, IL (United States); Hakim, N. [Detroit Diesel Corp., MI (United States); Harris, K. [Dubbeldee Harris Diamond Corp., Mt. Arlington, NJ (United States); Hay, R. [Norton Diamond Film, Northboro, MA (United States); Herk, L. [Southwest Research Inst., Southfield, MI (United States); Hojnacki, H.; Rourk, D. [Intelligent Structures Incorporated, Canton, MI (United States); Kamo, R. [Adiabatics, Inc., Columbus, IN (United States); Nieman, B. [Allied-Signal Inc., Des Plaines, IL (United States); O`Neill, D. [3M, St. Paul, MN (United States); Peterson, M.B. [Wear Sciences, Arnold, MD (United States); Pfaffenberger, G. [Allison Gas Turbine, Indianapolis, IN (United States); Pryor, R.W. [Wayne State Univ., Detroit, MI (United States); Russell, J. [Superconductivity Publications, Inc., Somerset, NJ (United States); Syniuta, W. [Advanced Mechanical Technology, Inc., Newton, MA (United States); Tamor, M. [Ford Motor Co., Dearborn, MI (United States); Vojnovich, T. [Dept. of Energy, Washington, DC (United States); Yarbrough, W. [Pennsylvania State Univ., University Park (United States); Yust, C.S. [Oak Ridge National Lab., TN (United States)

1993-01-01T23:59:59.000Z

100

E-Print Network 3.0 - amoco cadiz oil Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

U.S., including Alaska and the Gulf of Mexico. Part... 's evaluation panel for the oil shale RD&D proposals, played a key role in developing DNR's ... Source: Khatiwala, Samar -...

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Straight Vegetable Oil as a Diesel Fuel? (Fact Sheet)  

SciTech Connect (OSTI)

Discusses the use of straight vegetable oil as a diesel fuel and the use of biodiesel as a transportation fuel.

Not Available

2010-05-01T23:59:59.000Z

102

In Solis Pacem Dialogue between modern technology and nature is developed through celebrating solar panels and a styl-  

E-Print Network [OSTI]

with a discussion about technology and nature. A field of solar panels to produce economic revenue to consider technology and energy, a Solar Garden exists among the panels. In contrast, an Asian-inspired PondIn Solis Pacem Dialogue between modern technology and nature is developed through celebrating solar

Goodman, Robert M.

103

WIPP_Panel_7_Approved  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500IIVasudhaSurface.Laboratory30, 2014WIPP's Scott MaxwellPanel 7

104

Intergovernmental Panel on Climate Change  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfrared Land SurfaceVirus-InfectedIntelligentCO2theIntergovernmental Panel on

105

International Oil Supplies and Demands  

SciTech Connect (OSTI)

The eleventh Energy Modeling Forum (EMF) working group met four times over the 1989--90 period to compare alternative perspectives on international oil supplies and demands through 2010 and to discuss how alternative supply and demand trends influence the world's dependence upon Middle Eastern oil. Proprietors of eleven economic models of the world oil market used their respective models to simulate a dozen scenarios using standardized assumptions. From its inception, the study was not designed to focus on the short-run impacts of disruptions on oil markets. Nor did the working group attempt to provide a forecast or just a single view of the likely future path for oil prices. The model results guided the group's thinking about many important longer-run market relationships and helped to identify differences of opinion about future oil supplies, demands, and dependence.

Not Available

1991-09-01T23:59:59.000Z

106

International Oil Supplies and Demands  

SciTech Connect (OSTI)

The eleventh Energy Modeling Forum (EMF) working group met four times over the 1989--1990 period to compare alternative perspectives on international oil supplies and demands through 2010 and to discuss how alternative supply and demand trends influence the world's dependence upon Middle Eastern oil. Proprietors of eleven economic models of the world oil market used their respective models to simulate a dozen scenarios using standardized assumptions. From its inception, the study was not designed to focus on the short-run impacts of disruptions on oil markets. Nor did the working group attempt to provide a forecast or just a single view of the likely future path for oil prices. The model results guided the group's thinking about many important longer-run market relationships and helped to identify differences of opinion about future oil supplies, demands, and dependence.

Not Available

1992-04-01T23:59:59.000Z

107

Integrated Solar Panel Antennas for Cube Satellites.  

E-Print Network [OSTI]

??This thesis work presents an innovative solution for small satellite antennas by integrating slot antennas and solar cells on the same panel to save small… (more)

Mahmoud, Mahmoud N.

2010-01-01T23:59:59.000Z

108

Oil shale, tar sands, and related materials  

SciTech Connect (OSTI)

This sixteen-chapter book focuses on the many problems and the new methodology associated with the commercialization of the oil shale and tar sand industry. Topics discussed include: an overview of the Department of Energy's oil shale R, D, and D program; computer simulation of explosive fracture of oil shale; fracturing of oil shale by treatment with liquid sulfur dioxide; chemistry of shale oil cracking; hydrogen sulfide evolution from Colorado oil shale; a possible mechanism of alkene/alkane production in oil shale retorting; oil shale retorting kinetics; kinetics of oil shale char gasification; a comparison of asphaltenes from naturally occurring shale bitumen and retorted shale oils: the influence of temperature on asphaltene structure; beneficiation of Green River oil shale by density methods; beneficiation of Green River oil shale pelletization; shell pellet heat exchange retorting: the SPHER energy-efficient process for retorting oil shale; retorted oil shale disposal research; an investigation into the potential economics of large-scale shale oil production; commercial scale refining of Paraho crude shale oil into military specification fuels; relation between fuel properties and chemical composition; chemical characterization/physical properties of US Navy shale-II fuels; relation between fuel properties and chemical composition: stability of oil shale-derived jet fuel; pyrolysis of shale oil residual fractions; synfuel stability: degradation mechanisms and actual findings; the chemistry of shale oil and its refined products; the reactivity of Cold Lake asphaltenes; influence of thermal processing on the properties of Cold Lake asphaltenes: the effect of distillation; thermal recovery of oil from tar sands by an energy-efficient process; and hydropyrolysis: the potential for primary upgrading of tar sand bitumen.

Stauffer, H.C.

1981-01-01T23:59:59.000Z

109

STFC Astronomy Advisory Panel Report (October 2012) STFC Astronomy Advisory Panel report (October 2012) 1  

E-Print Network [OSTI]

#12;STFC Astronomy Advisory Panel Report (October 2012) STFC Astronomy Advisory Panel report (October 2012) 1 STFC Astronomy Advisory Panel 2012 Programmatic Review report to PPAN (October 2012) Executive summary This document provides a roadmap for UK astronomy and provides advice for future science

Crowther, Paul

110

Nuisance parameters, composite likelihoods and a panel of GARCH models  

E-Print Network [OSTI]

Nuisance parameters, composite likelihoods and a panel of GARCH models Cavit Pakel Department ) GARCH panels. The defining feature of a GARCH panel with time-series length T is that, while nuisance on the application of the composite likelihood (CL) method to GARCH panels. A GARCH panel is a collection

Wolfe, Patrick J.

111

Panel Session Notes Session II: Energy  

E-Print Network [OSTI]

with resources such as biofuels, wind and solar, however, there are problems on how to integrate these ideas due to make cars more efficient, to make solar panels store more energy to be dispersed throughout the nightPanel Session Notes Session II: Energy Moderator: Dr. Jennifer Curtis Panelists: Dr. Gary Peter

Jawitz, James W.

112

Gas pump with movable gas pumping panels  

DOE Patents [OSTI]

Apparatus for pumping gas continuously a plurality of articulated panels of getter material, each of which absorbs gases on one side while another of its sides is simultaneously reactivated in a zone isolated by the panels themselves from a working space being pumped.

Osher, John E. (Alamo, CA)

1984-01-01T23:59:59.000Z

113

Kingspan Insulated Panels: Order (2013-CE-5353)  

Broader source: Energy.gov [DOE]

DOE ordered Kingspan Insulated Panels, Inc. to pay a $8,000 civil penalty after finding Kingspan Insulated Panels had failed to certify that any basic models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

114

AQUEOUS HOMOGENEOUS REACTORTECHNICAL PANEL REPORT  

SciTech Connect (OSTI)

Considerable interest has been expressed for developing a stable U.S. production capacity for medical isotopes and particularly for molybdenum- 99 (99Mo). This is motivated by recent re-ductions in production and supply worldwide. Consistent with U.S. nonproliferation objectives, any new production capability should not use highly enriched uranium fuel or targets. Conse-quently, Aqueous Homogeneous Reactors (AHRs) are under consideration for potential 99Mo production using low-enriched uranium. Although the Nuclear Regulatory Commission (NRC) has guidance to facilitate the licensing process for non-power reactors, that guidance is focused on reactors with fixed, solid fuel and hence, not applicable to an AHR. A panel was convened to study the technical issues associated with normal operation and potential transients and accidents of an AHR that might be designed for isotope production. The panel has produced the requisite AHR licensing guidance for three chapters that exist now for non-power reactor licensing: Reac-tor Description, Reactor Coolant Systems, and Accident Analysis. The guidance is in two parts for each chapter: 1) standard format and content a licensee would use and 2) the standard review plan the NRC staff would use. This guidance takes into account the unique features of an AHR such as the fuel being in solution; the fission product barriers being the vessel and attached systems; the production and release of radiolytic and fission product gases and their impact on operations and their control by a gas management system; and the movement of fuel into and out of the reactor vessel.

Diamond, D.J.; Bajorek, S.; Bakel, A.; Flanagan, G.; Mubayi, V.; Skarda, R.; Staudenmeier, J.; Taiwo, T.; Tonoike, K.; Tripp, C.; Wei, T.; Yarsky, P.

2010-12-03T23:59:59.000Z

115

Thin film photovoltaic panel and method  

DOE Patents [OSTI]

A thin film photovoltaic panel includes a backcap for protecting the active components of the photovoltaic cells from adverse environmental elements. A spacing between the backcap and a top electrode layer is preferably filled with a desiccant to further reduce water vapor contamination of the environment surrounding the photovoltaic cells. The contamination of the spacing between the backcap and the cells may be further reduced by passing a selected gas through the spacing subsequent to sealing the backcap to the base of the photovoltaic panels, and once purged this spacing may be filled with an inert gas. The techniques of the present invention are preferably applied to thin film photovoltaic panels each formed from a plurality of photovoltaic cells arranged on a vitreous substrate. The stability of photovoltaic conversion efficiency remains relatively high during the life of the photovoltaic panel, and the cost of manufacturing highly efficient panels with such improved stability is significantly reduced.

Ackerman, Bruce (El Paso, TX); Albright, Scot P. (El Paso, TX); Jordan, John F. (El Paso, TX)

1991-06-11T23:59:59.000Z

116

Effects of solar photovoltaic panels on roof heat transfer  

E-Print Network [OSTI]

the underside of the tilted solar panels and the surface of the roof under the solar panel (Fig.  2).  An air temperature of the  solar panel is similar to the roof 

Dominguez, Anthony; Kleissl, Jan; Luvall, Jeffrey C

2011-01-01T23:59:59.000Z

117

Essays on Macroeconomics and Oil  

E-Print Network [OSTI]

the Oil Industry . . . . . . . . . . . . . . . . . . . . . .in the Venezuelan Oil Industry . . . . . . . . . . . . .and Productivity: Evidence from the Oil Industry . .

CAKIR, NIDA

2013-01-01T23:59:59.000Z

118

Essays on Macroeconomics and Oil  

E-Print Network [OSTI]

Oil Production . . . . . . . . . . . . . . . . . . . . . . . . . . .Oil Production in Venezuela and Mexico . . . . . . . . . .Oil Production and Productivity in Venezuela and

CAKIR, NIDA

2013-01-01T23:59:59.000Z

119

Panel 1 - comparative evaluation of deposition technologies  

SciTech Connect (OSTI)

This working group attempted to evaluate/compare the different types of deposition techniques currently under investigation for depositing diamond and diamond-like carbon films. A table lists the broad types of techniques that were considered for depositing diamond and diamond-like carbon films. After some discussion, it was agreed that any evaluation of the various techniques would be dependent on the end application. Thus the next action was to list the different areas where diamond and DLC films could find applications in transportation. These application areas are listed in a table. The table intentionally does not go into great detail on applications because that subject is dealt with specifically by Panel No. 4 - Applications To Transportation. The next action concentrated on identifying critical issues or limitations that need to be considered in evaluating the different processes. An attempt was then made to rank different broad categories of deposition techniques currently available or under development based on the four application areas and the limitations. These rankings/evaluations are given for diamond and DLC techniques. Finally, the working group tried to identify critical development and research issues that need to be incorporated into developing a long-term program that focuses on diamond/DLC coatings for transportation needs. 5 tabs.

Fenske, G.R.; Stodolsky, F. [Argonne National Lab., IL (United States); Benson, D.K.; Pitts, R.J. [National Renewable Energy Lab., Golden, CO (United States); Bhat, D.G. [GTE Valenite Corp., Troy, MI (United States); Yulin Chen [Allison Gas Turbine Division, GM, Indianapolis, IN (United States); Gat, R.; Sunkara, M.K. [Case Western Reserve Univ., Cleveland, OH (United States); Kelly, M. [Stanford Univ., CA (United States); Lawler, J.E. [Univ. of Wisconsin, Madison (United States); Nagle, D.C. [Martin Marietta Labs., Baltimore, MD (United States); Outka, D. [Sandia National Laboratories, Livermore, CA (United States); Revankar, G.S. [Deere & Co., Moline, IL (United States); Subramaniam, V.V. [Ohio State Univ., Columbus (United States); Wilbur, P.J. [Colorado State Univ., Fort Collins (United States); Mingshow Wong [Northwestern Univ., Evanston, IL (United States); Woolam, W.E. [Southwest Research Inst., Arlington, VA (United States)

1993-01-01T23:59:59.000Z

120

Free Energy Code Online Discussion  

E-Print Network [OSTI]

Free Energy Code Online Discussion for Building Department Personnel Join us for this FREE 90 by California utility customers under the auspices of the California Public Utilities Commission and in support -- availability subject to enrollment levels: Tuesday, October 1 ­ Click here to register Wednesday, October 2

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

ADVANCED REFLECTIVE FILMS AND PANELS FOR NEXT GENERATION SOLAR...  

Office of Environmental Management (EM)

ADVANCED REFLECTIVE FILMS AND PANELS FOR NEXT GENERATION SOLAR COLLECTORS ADVANCED REFLECTIVE FILMS AND PANELS FOR NEXT GENERATION SOLAR COLLECTORS This presentation was delivered...

122

Obama Administration Announces Plans to Install New Solar Panels...  

Broader source: Energy.gov (indexed) [DOE]

Plans to Install New Solar Panels on the White House Residence Obama Administration Announces Plans to Install New Solar Panels on the White House Residence October 5, 2010 -...

123

New Ideas for Seeding Your Solar Marketplace Workshop Panel Presentati...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Panel Presentations New Ideas for Seeding Your Solar Marketplace Workshop Panel Presentations Download the speaker presentations from the 2014 SunShot Grand Challenge Summit and...

124

Development of a plasma panel radiation detector  

SciTech Connect (OSTI)

This article reports on the development and experimental results of commercial plasma display panels adapted for their potential use as micropattern gas radiation detectors. The plasma panel sensor (PPS) design and materials include glass substrates, metal electrodes and inert gas mixtures which provide a physically robust, hermetically sealed device. Plasma display panels used as detectors were tested with cosmic ray muons, beta rays and gamma rays, protons, and thermal neutrons. The results demonstrated rise times and time resolution of a few nanoseconds, as well as sub-millimeter spatial resolution compatible with the pixel pitch.

Ball, Robert [University of Michigan; Beene, James R [ORNL; Ben Moshe, M. [Tel Aviv University; Benhammou, Yan [Tel Aviv University; Bensimon, B [Tel Aviv University; Chapman, J. Wehrley [University of Michigan; Etzion, E [Tel Aviv University; Ferretti, Claudio [University of Michigan; Friedman, Dr. Peter S. [Integrated Sensors, LLC; Levin, Daniel S. [University of Michigan; Silver, Yiftah [Tel Aviv University; Weaverdyck, Curtis [University of Michigan; Wetzel, R. [University of Michigan; Zhou, Bing [University of Michigan; Anderson, T [GE Measurement and Control Solutions; McKinny, K [GE Measurement and Control Solutions; Bentefour, E [Ion Beam Applications

2014-01-01T23:59:59.000Z

125

Flat or curved thin optical display panel  

DOE Patents [OSTI]

An optical panel includes a plurality of waveguides stacked together, with each waveguide having a first end and an opposite second end. The first ends collectively define a first face, and the second ends collectively define a second face of the panel. The second face is disposed at an acute face angle relative to the waveguides to provide a panel which is relatively thin compared to the height of the second face. In an exemplary embodiment for use in a projection TV, the first face is substantially smaller in height than the second face and receives a TV image, with the second face defining a screen for viewing the image enlarged. 7 figures.

Veligdan, J.T.

1995-01-10T23:59:59.000Z

126

Development of a plasma panel radiation detector  

E-Print Network [OSTI]

This article reports on the development and experimental results of commercial plasma display panels adapted for their potential use as micropattern gas radiation detectors. The plasma panel sensors (PPS) design an materials include glass substrates, metal electrodes and inert gas mixtures which provide a physically robust, hermetically-sealed device. Plasma display panels used as detectors were tested with cosmic ray muons, beta rays and gamma rays, protons and thermal neutrons. The results demonstrated rise times and time resolution of a few nanoseconds, as well as sub-millimeter spatial resolution compatible with the pixel pitch.

R. Ball; J. R. Beene; M. Ben-Moshe; Y. Benhammou; R. Bensimon; J. W. Chapman; E. Etzion; C. Ferretti; P. S. Friedman; D. S. Levin; Y. Silver; R. L. Varner; C. Weaverdyck; R. Wetzel; B. Zhou; T. Anderson; K. McKinny; E. H. Bentefour

2014-06-14T23:59:59.000Z

127

Minimizing casing corrosion in Kuwait oil fields  

SciTech Connect (OSTI)

Corrosion in production strings is a well known problem in Kuwait oil fields. Failure to remedy the affected wells results mainly in undesirable dump flooding of the oil reservoirs, or in oil seepage and hydrocarbon contamination in shallow water bearing strata. Any of these situations (unless properly handled) leads to a disastrous waste of oil resources. This study discusses casing leaks in Kuwait oil fields, the nature of the formations opposite the leaks and their contained fluids, and the field measures that can be adopted in order to avoid casing leak problems.

Agiza, M.N.; Awar, S.A.

1983-03-01T23:59:59.000Z

128

Enhanced oil recovery in Rumania  

SciTech Connect (OSTI)

The paper describes the application of the fire-floods to a broad range of Romanian oil reservoirs and crude properties and reviews the field tests of polymer flooding, surfactant flooding and alkaline flooding. A commercial scale project with cyclic steam injection is presented and also the use of the domestic CO/sub 2/ sources to enhanced oil recovery. The results and the difficulties encountered are briefly discussed and also the potential of EOR methods in Romania are presented. 17 refs.

Carcoana, A.N.

1982-01-01T23:59:59.000Z

129

Bioconversion of Heavy oil.  

E-Print Network [OSTI]

??70 % of world?s oil reservoirs consist of heavy oil, and as the supply of conventional oil decreases, researchers are searching for new technologies to… (more)

Steinbakk, Sandra

2011-01-01T23:59:59.000Z

130

5 World Oil Trends WORLD OIL TRENDS  

E-Print Network [OSTI]

5 World Oil Trends Chapter 1 WORLD OIL TRENDS INTRODUCTION In considering the outlook for California's petroleum supplies, it is important to give attention to expecta- tions of what the world oil market. Will world oil demand increase and, if so, by how much? How will world oil prices be affected

131

Flat panel ferroelectric electron emission display system  

DOE Patents [OSTI]

A device which can produce a bright, raster scanned or non-raster scanned image from a flat panel. Unlike many flat panel technologies, this device does not require ambient light or auxiliary illumination for viewing the image. Rather, this device relies on electrons emitted from a ferroelectric emitter impinging on a phosphor. This device takes advantage of a new electron emitter technology which emits electrons with significant kinetic energy and beam current density.

Sampayan, Stephen E. (Manteca, CA); Orvis, William J. (Livermore, CA); Caporaso, George J. (Livermore, CA); Wieskamp, Ted F. (Livermore, CA)

1996-01-01T23:59:59.000Z

132

Neutron shielding panels for reactor pressure vessels  

DOE Patents [OSTI]

In a nuclear reactor neutron panels varying in thickness in the circumferential direction are disposed at spaced circumferential locations around the reactor core so that the greatest radial thickness is at the point of highest fluence with lesser thicknesses at adjacent locations where the fluence level is lower. The neutron panels are disposed between the core barrel and the interior of the reactor vessel to maintain radiation exposure to the vessel within acceptable limits.

Singleton, Norman R. (Murrysville, PA)

2011-11-22T23:59:59.000Z

133

Toward integrated PV panels and power electronics using printing technologies  

SciTech Connect (OSTI)

In this paper, we review the latest developments in the area of printing technologies with an emphasis on the fabrication of control-embedded photovoltaics (PV) with on-board active and passive devices. We also review the use of power converters and maximum power point tracking (MPPT) circuits with PV panels. Our focus is on the investigation of the simplest implementations of such circuits in view of their integration with solar cells using printing technologies. We see this concept as potentially enabling toward further cost reduction. Besides a discussion as to feasibility, we shall also present some projections and guidelines toward possible integration. (author)

Ababei, Cristinel; Yuvarajan, Subbaraya [Electrical and Computer Engineering Department, North Dakota State University, Fargo, ND 58108 (United States); Schulz, Douglas L. [Center for Nanoscale Science and Engineering, North Dakota State University, Fargo, ND 58102 (United States)

2010-07-15T23:59:59.000Z

134

Hydrotreating of oil from eastern oil shale  

SciTech Connect (OSTI)

Oil shale provides one of the major fossil energy reserves for the United States. The quantity of reserves in oil shale is less than the quantity in coal, but is much greater (by at least an order of magnitude) than the quantity of crude oil reserves. With so much oil potentially available from oil shale, efforts have been made to develop techniques for its utilization. In these efforts, hydrotreating has proved to be an acceptable technique for upgrading raw shale oil to make usuable products. The present work demonstrated the use of the hydrotreating technique for upgrading an oil from Indiana New Albany oil shale.

Scinta, J.; Garner, J.W.

1984-01-01T23:59:59.000Z

135

Ein historisches Photovoltaik-Modul:das TSG MQ 36/0. A historical module:the TSG MQ 36/0 solar panel.  

E-Print Network [OSTI]

/0 solar panel. #12;Die Photovoltaikanlage des Energielabors der Universi- tät Oldenburg ist eine der the condition of a solar module:Scientists examine the solar panel. #12;54 EINBLICKE 9 The "Energielabor"attheUniversityofOldenburg modules provide very important measurement data for the current discussion about the lifetime of solar

Damm, Werner

136

War curbs oil exports by Iran and Iraq  

SciTech Connect (OSTI)

A discussion of the effects of the war between Iran and Iraq on oil exports from the area covers damage (extent unknown) to the Abadan, Iran, and Basra, Iraq, oil refineries, to the Iraqi petrochemical complex under construction at Basra, to oil export terminals at Kharg Island and Mina-al-Bakr, and to other oil facilities; war-caused reductions in oil production, refining, shipping, and export, estimated at 2.05-3.35 million bbl/day; the possible effects of the war on OPEC's decisions concerning oil production and pricing; the significance of the Strait of Hormuz for the export of oil by several countries in addition to the belligerents; the U.S. and non-Communist oil stocks which might enable the world to avoid an oil shortage if the war is ended in the near future; and the long-term effects of the war on Iran's and Iraq's oil industries.

Not Available

1980-09-29T23:59:59.000Z

137

Project DEEP STEAM: third meeting of the technical advisory panel, Bakersfield, CA, March 1980  

SciTech Connect (OSTI)

The third meeting of the technical advisory panel for the Deep Steam project was held in March 1980 in Bakersfield, California. The following seven papers were presented: Materials Studies; Insulation/Packer Simulation Test; Enhanced Recovery Packer; High Pressure Downhole Steam Generator; Lower Pressure Downhole Steam Generator; Physical Simulations; and Field Testing. The panel made many recommendations, some of which are: shell calcium silicate insulation should be included in the injection string modification program; for metal packer, consider age hardening alloys, testing with thermal cycling, intentionally flawed casing, and operational temperatures effect on differential expansion, plus long term tests under temperature and corrosive environment; for minimum stress packer, consider testing environment carefully as some elastomers are especially susceptible to oil, oxygen, and combustion gases; for downhole steam generator, quality of water required with new low pressure combustion design needs to be investigated; in field testing, materials coupons, for corrosion monitoring, should be an integral part of field test operations.

Fox, R. L.; Johnson, D. R.; Donaldson, A. B.; Mulac, A. J.; Krueger, D. A.

1981-04-01T23:59:59.000Z

138

DOE Hydrogen Transition Analysis Workshop Discussion Comments...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Workshop Discussion Comments, Questions, and Action Items DOE Hydrogen Transition Analysis Workshop Discussion Comments, Questions, and Action Items Discussion comments, questions,...

139

Optical panel system including stackable waveguides  

DOE Patents [OSTI]

An optical panel system including stackable waveguides is provided. The optical panel system displays a projected light image and comprises a plurality of planar optical waveguides in a stacked state. The optical panel system further comprises a support system that aligns and supports the waveguides in the stacked state. In one embodiment, the support system comprises at least one rod, wherein each waveguide contains at least one hole, and wherein each rod is positioned through a corresponding hole in each waveguide. In another embodiment, the support system comprises at least two opposing edge structures having the waveguides positioned therebetween, wherein each opposing edge structure contains a mating surface, wherein opposite edges of each waveguide contain mating surfaces which are complementary to the mating surfaces of the opposing edge structures, and wherein each mating surface of the opposing edge structures engages a corresponding complementary mating surface of the opposite edges of each waveguide.

DeSanto, Leonard (Dunkirk, MD); Veligdan, James T. (Manorville, NY)

2007-11-20T23:59:59.000Z

140

Eternal Sunshine of the Solar Panel  

E-Print Network [OSTI]

The social dynamics of residential solar panel use within a theoretical population are studied using a compartmental model. In this study we consider three solar power options commonly available to consumers: the community block, leasing, and buying. In particular we are interested in studying how social influence affects the dynamics within these compartments. As a result of this research a threshold value is determined, beyond which solar panels persist in the population. In addition, as is standard in this type of study, we perform equilibrium analysis, as well as uncertainty and sensitivity analyses on the threshold value. We also perform uncertainty analysis on the population levels of each compartment. The analysis shows that social influence plays an important role in the adoption of residential solar panels.

Ginithan, Mackenzie; Lefevre, Daniel; Srinivasan, Sowmya; Urena, Barbara; Barley, Kamal; Vega, Jose; Yong, Kamuela E; Flores, Jose

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Optical panel system including stackable waveguides  

DOE Patents [OSTI]

An optical panel system including stackable waveguides is provided. The optical panel system displays a projected light image and comprises a plurality of planar optical waveguides in a stacked state. The optical panel system further comprises a support system that aligns and supports the waveguides in the stacked state. In one embodiment, the support system comprises at least one rod, wherein each waveguide contains at least one hole, and wherein each rod is positioned through a corresponding hole in each waveguide. In another embodiment, the support system comprises at least two opposing edge structures having the waveguides positioned therebetween, wherein each opposing edge structure contains a mating surface, wherein opposite edges of each waveguide contain mating surfaces which are complementary to the mating surfaces of the opposing edge structures, and wherein each mating surface of the opposing edge structures engages a corresponding complementary mating surface of the opposite edges of each waveguide.

DeSanto, Leonard; Veligdan, James T.

2007-03-06T23:59:59.000Z

142

Near Shore Submerged Oil Assessment  

E-Print Network [OSTI]

) oil spill in the Gulf of Mexico, submerged oil refers to near shore oil which has picked up sediments You Should Know About Submerged Oil 1. Submerged oil is relatively uncommon: DWH oil is a light crude

143

Report of panel 1: The appropriate scope and mission of ITER  

SciTech Connect (OSTI)

This panel looked at the mission of ITER, and how the US should address the present plans, and considers a number of alternative plans to arrive at the eventual goals of ITER. The panel considered three major approaches which have been discussed on the international scale, and tries to present the strengths, weaknesses, and possible changes to these plans. It suggests that any of these plans can arrive at the eventual aim, but may involve differing risks and time commitments. All plans involve ITER design studies, development work on technologies which must be in place for ITER design to succeed, and testing of materials and components for application in the device.

Linford, R.K. (Los Alamos National Lab., NM (United States)); Weitzner, H.; Abdou, M.A.; Baldwin, D.E.; Berkner, K.H.; Berry, L.A.; Culler, F.L.; Dean, S.O.; DeFreece, D.A.; Gauster, W.B. (and others)

1992-12-01T23:59:59.000Z

144

Oil spill response resources  

E-Print Network [OSTI]

. ACKNOWLEDGMENTS. TABLE OF CONTENTS . . Vn INTRODUCTION. . Oil Pollution Act. Oil Spill Response Equipment . . OB JECTIVES . 12 LITERATURE REVIEW. United States Contingency Plan. . Response Resources Definition of Clean in Context to an Oil Spill. Oil... this fitle. Title IV expands federal authority in managing oil spill clean up operations and amends the provisions for oil spill clean up under the Federal Water Pollution Control Act. It also called for Oil spill plans for vessels and facilities starting...

Muthukrishnan, Shankar

1996-01-01T23:59:59.000Z

145

THE SHALE OIL BOOM: A U.S. PHENOMENON  

E-Print Network [OSTI]

June 2013 THE SHALE OIL BOOM: A U.S. PHENOMENON LEONARDO MAUGERI The Geopolitics of Energy Project material clearly cite the full source: Leonardo Maugeri. "The Shale Oil Boom: A U.S. Phenomenon" Discussion and International Affairs. #12;June 2013 THE SHALE OIL BOOM: A U.S. PHENOMENON LEONARDO MAUGERI The Geopolitics

146

Panel Unit Root Tests in the Presence of a Multifactor Error Structure  

E-Print Network [OSTI]

Analysis and Policy (CFAP), University of Cambridge cUniversity of York December 2007 Abstract This paper extends the cross sectionally augmented panel unit root test proposed by Pesaran (2007) to the case of a multifactor error structure. The basic idea... = eit#0; pit is the real exchange rate, eqit is the real equity price index, gdpit is real output, rLit is the quarterly long-term interest rate and poilt is the nominal oil price.5 The 32 countries considered are: Argentina, Australia, Austria, Belgium...

Pesaran, M Hashem; Smith, L Vanessa; Yamagata, Takashi

147

Effects of gaps in adhesives that bond elastically deformed panels to parabolic, cylindrical substructures  

SciTech Connect (OSTI)

In previous studies of the mechanical behavior of line focusing solar collectors, the reflective surface panel was modeled as a thin, initially flat, elastic plate that underwent large displacements to attain the shape of a prescribed parabolic cylinder. Attention was focused upon the stresses that developed in an adhesive layer which bonded the deformed panel to a rigid, parabolic substructure. Among the myriad possible collector designs, some possess longitudinally oriented, hollow ribs or corrugations in the substructure which interrupt the transverse continuity of the bond line between the deformed panel and the substructure. Thus, finite gaps in the adhesive are present which create regions where the panel surface becomes intermittently supported. The presence of these gaps perturbs the otherwise smooth distribution of adhesive contact stresses and it is the analytical modeling of this behavior that is the subject of the present report. In particular, attention is devoted to gaps which overlap with the edge effect zone - a region near the rim or vertex of the deformed panel where, in the absence of uniform edge loads necessary to maintain a true parabolic shape, high stresses and associated deformations occur. Significant influences of the gap size and position in the edge effect zone are demonstrated and discussed.

Wilson, R.K.; Reuter, R.C. Jr.

1982-03-01T23:59:59.000Z

148

ROBOTIC DEVICE FOR CLEANING PHOTOVOLTAIC PANEL ARRAYS  

E-Print Network [OSTI]

-Corresponding Author, ymarkopoulos@greenproject.gr, +30-210-60.90.880 With growing costs of electricity and concern. The main method for harnessing solar power is with arrays made up of photovoltaic (PV) panels. Accumulation, and it is vital to maximize the power generating potential during daily service. The accumulation of dust

Mavroidis, Constantinos

149

Training for Emergencies Panel: Chris Reed  

E-Print Network [OSTI]

Training for Emergencies Panel: Chris Reed Ben Berman Immanuel Barshi It's very important to have pilots sharing ideas with other instructor pilots. IB: In aviation there is a lot of mentor training. Instructor pilots are not trained trainers; they are aviators who are providing training. When things

150

Panel Data Econometric Models: Theory and Application  

E-Print Network [OSTI]

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii 1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. NONPARAMETRIC ESTIMATION OF FIXED EFFECTS PANEL DATA MODELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Introduction....5 Conclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3. IS HONG KONG DOLLAR OVERVALUED? EVIDENCE FROM HONG KONG?S TRADE PRICES POST FINANCIAL CRISIS . . . . . . . . . . 14 3.1 Introduction...

Gao, Yichen

2013-05-20T23:59:59.000Z

151

International Oil Supplies and Demands. Volume 1  

SciTech Connect (OSTI)

The eleventh Energy Modeling Forum (EMF) working group met four times over the 1989--90 period to compare alternative perspectives on international oil supplies and demands through 2010 and to discuss how alternative supply and demand trends influence the world`s dependence upon Middle Eastern oil. Proprietors of eleven economic models of the world oil market used their respective models to simulate a dozen scenarios using standardized assumptions. From its inception, the study was not designed to focus on the short-run impacts of disruptions on oil markets. Nor did the working group attempt to provide a forecast or just a single view of the likely future path for oil prices. The model results guided the group`s thinking about many important longer-run market relationships and helped to identify differences of opinion about future oil supplies, demands, and dependence.

Not Available

1991-09-01T23:59:59.000Z

152

International Oil Supplies and Demands. Volume 2  

SciTech Connect (OSTI)

The eleventh Energy Modeling Forum (EMF) working group met four times over the 1989--1990 period to compare alternative perspectives on international oil supplies and demands through 2010 and to discuss how alternative supply and demand trends influence the world`s dependence upon Middle Eastern oil. Proprietors of eleven economic models of the world oil market used their respective models to simulate a dozen scenarios using standardized assumptions. From its inception, the study was not designed to focus on the short-run impacts of disruptions on oil markets. Nor did the working group attempt to provide a forecast or just a single view of the likely future path for oil prices. The model results guided the group`s thinking about many important longer-run market relationships and helped to identify differences of opinion about future oil supplies, demands, and dependence.

Not Available

1992-04-01T23:59:59.000Z

153

Enhanced oil recovery in Rumania  

SciTech Connect (OSTI)

The wide oil field experience of the Romanian oil men in producing hydrocarbon reservoirs is based on an old tradition, but only after 1945 reservoir engineering studies were started in Romania. Beginning with 1950 conventional recovery methods expanded continually. During the last 10 years, however, the crude oil, as energy resource, has become of tremendous importance. The need for increasing the ultimate oil recovery has been felt in Romania as everywhere else. To attain this goal EOR methods were and are tested and expanded on a commercial scale. The paper describes the application of the fire-floods to a broad range of Romanian oil reservoirs and crude properties and reviews the field tests of polymer flooding, surfactant flooding and alkaline flooding. A commercial scale project with cyclic steam injection is presented and also the use of the domestic CO/sub 2/ sources to enhance oil recovery. The results and the diffuculties encountered are briefly discussed and also the potential of EOR methods in Romania are presented.

Carcoana, A.N.

1982-01-01T23:59:59.000Z

154

Arizona: Solar Panels Replace Inefficient Fossil Fuel-Powered...  

Energy Savers [EERE]

Arizona: Solar Panels Replace Inefficient Fossil Fuel-Powered Energy Systems Arizona: Solar Panels Replace Inefficient Fossil Fuel-Powered Energy Systems May 1, 2014 - 9:33am...

155

Mechanical behavior of dip-brazed aluminum sandwich panels  

E-Print Network [OSTI]

An experimental study was carried out to determine the mechanical behavior of sandwich panels containing cellular cores of varying shape. Compression and four point bend tests were performed on sandwich panels with square ...

Hohmann, Brian P. (Brian Patrick)

2007-01-01T23:59:59.000Z

156

LLNL oil shale project review: METC third annual oil shale contractors meeting  

SciTech Connect (OSTI)

The Lawrence Livermore National Laboratory combines laboratory and pilot-scale experimental measurements with mathematical modeling of fundamental chemistry and physics to provide a technical base for evaluating oil shale retorting alternatives. Presented herein are results of four research areas of interest in oil shale process development: Recent Progress in Solid-Recycle Retorting and Related Laboratory and Modeling Studies; Water Generation During Pyrolysis of Oil Shale; Improved Analytical Methods and Measurements of Rapid Pyrolysis Kinetics for Western and Eastern Oil Shale; and Rate of Cracking or Degradation of Oil Vapor In Contact with Oxidized Shale. We describe operating results of a 1 tonne-per-day, continuous-loop, solid-recycle, retort processing both Western And Eastern oil shale. Sulfur chemistry, solid mixing limits, shale cooling tests and catalyst addition are all discussed. Using a triple-quadrupole mass spectrometer, we measure individual species evolution with greater sensitivity and selectivity. Herein we discuss our measurements of water evolution during ramped heating of Western and Eastern oil shale. Using improved analytical techniques, we determine isothermal pyrolysis kinetics for Western and Eastern oil shale, during rapid heating, which are faster than previously thought. Finally, we discuss the rate of cracking of oil vapor in contact with oxidized shale, qualitatively using a sand fluidized bed and quantitatively using a vapor cracking apparatus. 3 refs., 4 figs., 1 tab.

Cena, R.J.; Coburn, T.T.; Taylor, R.W.

1988-01-01T23:59:59.000Z

157

Crude Oil  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781Title: Telephone:shortOilCompanyexcluding taxes)Countries0 0 0 0 0

158

EXPERIMENTAL TESTING OF TWO SOLAR PANEL SIMULATIONS Krisztina Leban  

E-Print Network [OSTI]

EXPERIMENTAL TESTING OF TWO SOLAR PANEL SIMULATIONS Krisztina Leban Institute of Energy Technology solar panel for varying temperature and irradiance. Final validation was done by comparing experimental are a renewable, non-polluting source of energy that are increasingly used for hybrid (solar panels and grid

Ritchie, Ewen

159

Peer Effects in the Diffusion of Solar Photovoltaic Panels  

E-Print Network [OSTI]

Peer Effects in the Diffusion of Solar Photovoltaic Panels Bryan Bollinger NYU Stern School base of consumers in the reference group. We study the diffusion of solar photovoltaic panels of an environmentally beneficial technology, solar photovoltaic (PV) panels. Policymakers are particularly interested

Lee, Daeyeol

160

NO. REV. MO EASEP SOLAR PANEL OCCULTAT ION  

E-Print Network [OSTI]

., : :. I · ' NO. REV. MO· EATM-59 EASEP SOLAR PANEL OCCULTAT ION PAGE l OF 9 DATE 24 Feb 1969 ()i~ ~ .I /1'1 . ! I Prepared by:~ ~Wallack . 11 ''--'/ ~~~ #12;: : .. EASEP SOLAR PANEL OCCULTATION. EATM-59 PAGE 2 OF 9 DATE 24 Feb I969 #12;NO. RIV. NO. : : .~ EASEP Solar Panel Occultation EATM-59 PAGI

Rathbun, Julie A.

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Chemical technology news from across RSC Publishing. Printing solar panels  

E-Print Network [OSTI]

Publishing Chemical technology news from across RSC Publishing. Printing solar panels 22 January size) silicon microcells that connect together to form flexible solar panels. By stamping hundreds solar panels 2/8/2010http://www.rsc.org/Publishing/ChemTech/Volume/2010/02/printing_solar.asp #12;Page 2

Rogers, John A.

162

Understanding Crude Oil Prices  

E-Print Network [OSTI]

business of having some oil in inventory, which is referredKnowledge of all the oil going into inventory today for salebe empty, because inventories of oil are essential for the

Hamilton, James Douglas

2008-01-01T23:59:59.000Z

163

China's Global Oil Strategy  

E-Print Network [OSTI]

nations began to seek out oil reserves around the world. 3on the limited global oil reserves and spiking prices. Manyto the largest proven oil reserves, making up 61 percent of

Thomas, Bryan G

2009-01-01T23:59:59.000Z

164

China's Global Oil Strategy  

E-Print Network [OSTI]

Michael T. Klare, Blood and Oil: The Dangers of America’sDowns and Jeffrey A. Bader, “Oil-Hungry China Belongs at BigChina, Africa, and Oil,” (Council on Foreign Relations,

Thomas, Bryan G

2009-01-01T23:59:59.000Z

165

Understanding Crude Oil Prices  

E-Print Network [OSTI]

Figure 5. Monthly oil production for Iran, Iraq, and Kuwait,day. Monthly crude oil production Iran Iraq Kuwait Figure 6.and the peak in U.S. oil production account for the broad

Hamilton, James Douglas

2008-01-01T23:59:59.000Z

166

Understanding Crude Oil Prices  

E-Print Network [OSTI]

2004. “OPEC’s Optimal Crude Oil Price,” Energy Policy 32(2),023 Understanding Crude Oil Prices James D. Hamilton Junedirectly. Understanding Crude Oil Prices* James D. Hamilton

Hamilton, James Douglas

2008-01-01T23:59:59.000Z

167

Understanding Crude Oil Prices  

E-Print Network [OSTI]

2004. “OPEC’s Optimal Crude Oil Price,” Energy Policy 32(2),percent change in real oil price. Figure 3. Price of crudein predicting quarterly real oil price change. variable real

Hamilton, James Douglas

2008-01-01T23:59:59.000Z

168

Understanding Crude Oil Prices  

E-Print Network [OSTI]

per day. Monthly crude oil production Iran Iraq KuwaitEIA Table 1.2, “OPEC Crude Oil Production (Excluding Lease2008, from EIA, “Crude Oil Production. ” Figure 16. U.S.

Hamilton, James Douglas

2008-01-01T23:59:59.000Z

169

Understanding Crude Oil Prices  

E-Print Network [OSTI]

2004. “OPEC’s Optimal Crude Oil Price,” Energy Policy 32(2),percent change in real oil price. Figure 3. Price of crude023 Understanding Crude Oil Prices James D. Hamilton June

Hamilton, James Douglas

2008-01-01T23:59:59.000Z

170

Understanding Crude Oil Prices  

E-Print Network [OSTI]

Natural Gas, Heating Oil and Gasoline,” NBER Working Paper.2006. “China’s Growing Demand for Oil and Its Impact on U.S.and Income on Energy and Oil Demand,” Energy Journal 23(1),

Hamilton, James Douglas

2008-01-01T23:59:59.000Z

171

China's Global Oil Strategy  

E-Print Network [OSTI]

capability to secure oil transport security. Additionally,international oil agreements: 1) ensuring energy security;security, and many argue that as the second-largest consumer of oil

Thomas, Bryan G

2009-01-01T23:59:59.000Z

172

China's Global Oil Strategy  

E-Print Network [OSTI]

China made an Iranian oil investment valued at $70 billion.across Iran, China’s oil investment may exceed $100 billionthese involving investment in oil and gas, really undermine

Thomas, Bryan G

2009-01-01T23:59:59.000Z

173

Understanding Crude Oil Prices  

E-Print Network [OSTI]

2007”. comparison, Mexico used 6.6— Chinese oil consumption17. Oil production from the North Sea, Mexico’s Cantarell,Mexico, Italy, France, Canada, US, and UK. Figure 10. Historical Chinese oil

Hamilton, James Douglas

2008-01-01T23:59:59.000Z

174

China's Global Oil Strategy  

E-Print Network [OSTI]

by this point, China’s demand Oil Demand vs. Domestic Supplycurrent pace of growth in oil demand as staying consistentand predictions of oil supply and demand affected foreign

Thomas, Bryan G

2009-01-01T23:59:59.000Z

175

Understanding Crude Oil Prices  

E-Print Network [OSTI]

and Income on Energy and Oil Demand,” Energy Journal 23(1),2006. “China’s Growing Demand for Oil and Its Impact on U.S.in the supply or demand for oil itself could be regarded as

Hamilton, James Douglas

2008-01-01T23:59:59.000Z

176

Interested Parties - 1603 Program Discussion | Department of...  

Broader source: Energy.gov (indexed) [DOE]

1603 Program Discussion Interested Parties - 1603 Program Discussion weekswagle.pdf More Documents & Publications Interested Parties - Myriant Interested Parties - NRG Energy...

177

Understanding Crude Oil Prices  

E-Print Network [OSTI]

2007”. comparison, Mexico used 6.6— Chinese oil consumption17. Oil production from the North Sea, Mexico’s Cantarell,

Hamilton, James Douglas

2008-01-01T23:59:59.000Z

178

Crude oil prices: Are our oil markets too tight?  

SciTech Connect (OSTI)

The answer to the question posed in the title is that tightness in the market will surely prevail through 1997. And as discussed herein, with worldwide demand expected to continue to grow, there will be a strong call on extra oil supply. Meeting those demands, however, will not be straightforward--as many observers wrongly believe--considering the industry`s practice of maintaining crude stocks at ``Just in time`` inventory levels. Further, impact will be felt from the growing rig shortage, particularly for deepwater units, and down-stream capacity limits. While these factors indicate 1997 should be another good year for the service industry, it is difficult to get any kind of consensus view from the oil price market. With most observers` information dominated by the rarely optimistic futures price of crude, as reflected by the NYMEX, the important fact is that oil prices have remained stable for three years and increased steadily through 1996.

Simmons, M.R. [Simmons and Co. International, Houston, TX (United States)

1997-02-01T23:59:59.000Z

179

Improving the diversity of manufacturing electroluminescent flat panel displays  

SciTech Connect (OSTI)

Crystalline calcium thiogallate with a cerium dopant has been deposited by metal-organic chemical vapor deposition (MOCVD) at temperatures below 600{degrees}C on a low cost glass substrate. An EL luminance of 1.05 fL was observed 40 volts above threshold at 60 Hz. This is more than an order of magnitude improvement over earlier crystalline-as-deposited thiogallate materials. These results pave the way for the use of MOCVD as a potential method for processing full color thin-film electroluminescent (TFEL) flat panel displays. The formation of the CaGa{sub 2}S{sub 4}:Ce phosphor requires precise control over a number of deposition parameters including flow rates, substrate temperature, and reactor pressure. The influence of these parameters will be discussed in terms of structure, uniformity, and TFEL device performance.

Moss, T.S.; Samuels, J.A.; Smith, D.C. [and others

1995-09-01T23:59:59.000Z

180

US/UK second level panel discussions on the health and value of: Ageing and lifetime predictions (u)  

SciTech Connect (OSTI)

Many healthy physics, engineering, and materials exchanges are being accomplished in ageing and lifetime prediction that directly supports US and UK Stockpile Management Programs. Lifetime assessment studies of silicon foams under compression - Joint AWE/LANLlLLNL study of compression set in stress cushions completed. Provides phenomenological prediction out to 50 years. Polymer volatile out-gassing studies - New exchange on the out-gassing of Ethylene Vinyl Acetate (EVA) using isotopic {sup 13}C labeling studies to interrogate mechanistic processes. Infra-red (IR) gas cell analytical capabilities developed by AWE will be used to monitor polymer out-gassing profiles. Pu Strength ageing Experiments and Constitutive Modeling - In recently compared modeling strategies for ageing effects on Pu yield strength at high strain rates, a US/UK consensus was reached on the general principle that the ageing effect is additive and not multiplicative. The fundamental mechanisms for age-strengthening in Pu remains unknown. Pu Surface and Interface Reactions - (1) US/UK secondment resulted in developing a metal-metal oxide model for radiation damaged studies consistent with a Modified Embedded Atom Method (MEAM) potential; and (2) Joint US/UK collaboration to study the role of impurities in hydride initiation. Detonator Ageing (wide range of activities) - (1) Long-term ageing study with field trials at Pantex incorporating materials from LANL, LLNL, SNL and AWE; (2) Characterization of PETN growth to detonation process; (3) Detonator performance modeling; and (4) Performance fault tree analysis. Benefits are a unified approach to lifetime prediction that Includes: materials characterization and the development of ageing models through improved understanding of the relationship between materials properties, ageing properties and detonator performance.

Castro, Richard G [Los Alamos National Laboratory

2011-01-18T23:59:59.000Z

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Biochemically enhanced oil recovery and oil treatment  

SciTech Connect (OSTI)

This invention relates to the preparation of new, modified organisms, through challenge growth processes, that are viable in the extreme temperature, pressure and pH conditions and salt concentrations of an oil reservoir and that are suitable for use in microbial enhanced oil recovery. The modified microorganisms of the present invention are used to enhance oil recovery and remove sulfur compounds and metals from the crude oil.

Premuzic, Eugene T. (East Moriches, NY); Lin, Mow (Rocky Point, NY)

1994-01-01T23:59:59.000Z

182

Biochemically enhanced oil recovery and oil treatment  

DOE Patents [OSTI]

This invention relates to the preparation of new, modified organisms, through challenge growth processes, that are viable in the extreme temperature, pressure and pH conditions and salt concentrations of an oil reservoir and that are suitable for use in microbial enhanced oil recovery. The modified microorganisms of the present invention are used to enhance oil recovery and remove sulfur compounds and metals from the crude oil. 62 figures.

Premuzic, E.T.; Lin, M.

1994-03-29T23:59:59.000Z

183

Bexar County Parking Garage Photovoltaic Panels  

SciTech Connect (OSTI)

The main objective of the Bexar County Parking Garage Photovoltaic (PV) Panel project is to install a PV System that will promote the use of renewable energy. This project will also help sustain Bexar County ongoing greenhouse gas emissions reduction and energy efficiency goals. The scope of this project includes the installation of a 100-kW system on the top level of a new 236,285 square feet parking garage. The PV system consists of 420 solar panels that covers 7,200 square feet and is tied into the electric-grid. It provides electricity to the office area located within the garage. The estimated annual electricity production of the PV system is 147,000 kWh per year.

Golda Weir

2012-01-23T23:59:59.000Z

184

Endogenous contagion – a panel data analysis  

E-Print Network [OSTI]

of the figure presents the coefficient estimates, and the second panel presents the t-value associated with each estimate along with the corresponding 99 percent critical values. Inspection of this figure shows evidence of joint contagion across all eleven... countries for equity returns in four clear episodes as measured by their significance at the 99 percent level. When contagion is evident, the parameter estimates of the fixed time effects are generally large in absolute terms, and tend to cluster...

Baur, Dirk; Fry, Renee

2006-01-01T23:59:59.000Z

185

Input to Priorities Panel August 7, 2012  

E-Print Network [OSTI]

Input to Priorities Panel August 7, 2012 Jeff Freidberg MIT 1 #12;The Emperor of Fusion has · Comparison (1 GW overnight cost) · Coal $ 3B · Gas $ 1B · Nuclear $ 4B · Wind $ 2B · Solar-T $ 3B · ITER $25B option · Tough MHD, heating, current drive, transport · I doubt it will achieve its mission · Still

186

Hydrogen Safety Panel | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensional Subject:GroundtoProduction Technical TeamReleasePanel Hydrogen

187

Beneficiation and hydroretorting of low grade oil shale  

SciTech Connect (OSTI)

A new approach to oil recovery from low grade oil shales has been developed jointly by the Mineral Resources Institute (MRI) of The University of Alabama and the HYCRUDE Corporation. The approach is based on the HYTORT process, which utilized hydrogen gas during the retorting process to enhance oil yields from many types of oil shales. The performance of the HYTORT process is further improved by combining it with MRI's froth flotation process. Taking advantage of differences in the surface properties of the kerogen and the inorganic mineral constituents of the oil shales, the MRI process can reject up to three quarters by weight of relatively kerogen-free inorganic fractions of the oil shale before HYTORT processing. The HYTORT and MRI processes are discussed. Results of tests by each process on oil shales of low to moderate inherent kerogen content are presented. Also discussed are the results of the combined processes on an Indiana New Albany oil shale. By combining the two processes, the raw shale which yielded 12 gallons of oil per ton by Fischer Assay was upgraded by flotation to a product yielding 27 gallons of Fischer Assay oil per ton. HYTORT processing of the beneficiated product recovered 54 gallons of oil per ton, an improvement in oil yield by a factor of 4.5 over the raw shale Fischer Assay.

Tippin, R.B.; Hanna, J.; Janka, J.C.; Rex, R.C. Jr.

1985-02-01T23:59:59.000Z

188

OIL & GAS INSTITUTE Introduction  

E-Print Network [OSTI]

OIL & GAS INSTITUTE CONTENTS Introduction Asset Integrity Underpinning Capabilities 2 4 4 6 8 9 10 COMPETITIVENESS UNIVERSITY of STRATHCLYDE OIL & GAS INSTITUTE OIL & GAS EXPERTISE AND PARTNERSHIPS #12;1 The launch of the Strathclyde Oil & Gas Institute represents an important step forward for the University

Mottram, Nigel

189

Eco Oil 4  

SciTech Connect (OSTI)

This article describes the processes, challenges, and achievements of researching and developing a biobased motor oil.

Brett Earl; Brenda Clark

2009-10-26T23:59:59.000Z

190

Understanding Crude Oil Prices  

E-Print Network [OSTI]

consumption would be reduced and incentives for production increased whenever the price of crude oil

Hamilton, James Douglas

2008-01-01T23:59:59.000Z

191

?Aceite Vegetal Puro Como Combustible Diesel? (Straight Vegetable Oil as a Diesel Fuel? Spanish Version) (Fact Sheet)  

SciTech Connect (OSTI)

Discusses the use of straight vegetable oil as a diesel fuel and the use of biodiesel as a transportation fuel.

Not Available

2010-06-01T23:59:59.000Z

192

Assistant Secretary Hoffman Discusses Grid Modernization with...  

Broader source: Energy.gov (indexed) [DOE]

Assistant Secretary Hoffman Discusses Grid Modernization with the New York Times and E&E TV Assistant Secretary Hoffman Discusses Grid Modernization with the New York Times and E&E...

193

Budget Discussion OHEP May 12, 2008  

E-Print Network [OSTI]

Budget Discussion OHEP May 12, 2008 Page 1 SLAC PPA Budget Discussion: FY09 Allocations Among BNR Directorate #12;Budget Discussion OHEP May 12, 2008 Page 2 Purpose of This Meeting * In February, we presented our budget plans for FY09 and beyond, guided by the future scientific program that we laid out

Wechsler, Risa H.

194

CWRU wins $3.8 million grant to wean sustainable energy off oil  

E-Print Network [OSTI]

and reduce the environmental impact of production and disposal. "The group provides expertise in synthesis promise for the next generation low-cost photovoltaics. Case Western Reserve physics professor Kenneth reducing oil dependency: building wind turbine blades and solar panels from biomaterials. During the next

Rollins, Andrew M.

195

Method for molding threads in graphite panels  

DOE Patents [OSTI]

A graphite panel (10) with a hole (11) having a damaged thread (12) is repaired by drilling the hole (11) to remove all of the thread and make a new hole (13) of larger diameter. A bolt (14) with a lubricated thread (17) is placed in the new hole (13) and the hole (13) is packed with graphite cement (16) to fill the hole and the thread on the bolt. The graphite cement (16) is cured, and the bolt is unscrewed therefrom to leave a thread (20) in the cement (16) which is at least as strong as that of the original thread (12).

Short, William W. (Livermore, CA); Spencer, Cecil (Silverton, OR)

1994-01-01T23:59:59.000Z

196

Method for molding threads in graphite panels  

DOE Patents [OSTI]

A graphite panel with a hole having a damaged thread is repaired by drilling the hole to remove all of the thread and making a new hole of larger diameter. A bolt with a lubricated thread is placed in the new hole and the hole is packed with graphite cement to fill the hole and the thread on the bolt. The graphite cement is cured, and the bolt is unscrewed therefrom to leave a thread in the cement which is at least as strong as that of the original thread. 8 figures.

Short, W.W.; Spencer, C.

1994-11-29T23:59:59.000Z

197

Advisory Panels | Stanford Synchrotron Radiation Lightsource  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation InInformationCenterResearch Highlights MediaFuelAbout UsAdvisory Panels SSRL Scientific

198

AN ENGINE OIL LIFE ALGORITHM.  

E-Print Network [OSTI]

??An oil-life algorithm to calculate the remaining percentage of oil life is presented as a means to determine the right time to change the oil… (more)

Bommareddi, Anveshan

2009-01-01T23:59:59.000Z

199

Essays on Macroeconomics and Oil  

E-Print Network [OSTI]

is described below. Data Crude oil production data is fromproductivity measure is crude oil production per worker, andwhich is measured as crude oil production per worker, is

CAKIR, NIDA

2013-01-01T23:59:59.000Z

200

Essays on Macroeconomics and Oil  

E-Print Network [OSTI]

Venezuelan Oil Industry Total Wells Drilled and InvestmentWells Drilled and Investment in the Venezuelan Oil Industryopenness of the oil sector to foreign investment contributes

CAKIR, NIDA

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Essays on Macroeconomics and Oil  

E-Print Network [OSTI]

Oil Production in Venezuela and Mexico . . . . . . . . . .Venezuela with Mexico, another major oil pro- ducing countryOil Production and Productivity in Venezuela and Mexico . . . . . . . .

CAKIR, NIDA

2013-01-01T23:59:59.000Z

202

Essays on Macroeconomics and Oil  

E-Print Network [OSTI]

Oil Production in Venezuela and Mexico . . . . . . . . . .Oil Production and Productivity in Venezuela and Mexico . . . . . . . .2.6: Oil Production in Venezuela and Mexico 350 Productivity

CAKIR, NIDA

2013-01-01T23:59:59.000Z

203

FESAC Planning Panel Report to UFA: November 12, 2007 FESAC Planning Panel Final Report  

E-Print Network [OSTI]

· Martin Greenwald ­ Chair · Richard Callis · Bill Dorland · David Gates · Jeff Harris · Rulon Linford · Mike Mauel · Kathryn McCarthy Panel · Dale Meade · Farrokh Najmabadi · Bill Nevins · John Sarff · Mike

204

Design and Analysis of Cooling Methods for Solar Panels.  

E-Print Network [OSTI]

??As the future progresses, many companies and industries are striving to achieve a "greener" approach to energy production by using solar energy. Solar panels that… (more)

Palumbo, Adam M

2013-01-01T23:59:59.000Z

205

Canadian Solar Road Panel Design: A Structural and Environmental Analysis.  

E-Print Network [OSTI]

??Solar road panels are a technology that have the ability to revolutionize the way that roads are built and how electricity is generated. Strong incentives… (more)

Northmore, Andrew

2014-01-01T23:59:59.000Z

206

FPGA Implementation of Multilayer Perceptron for Modeling of Photovoltaic panel  

SciTech Connect (OSTI)

The Number of electronic applications using artificial neural network-based solutions has increased considerably in the last few years. However, their applications in photovoltaic systems are very limited. This paper introduces the preliminary result of the modeling and simulation of photovoltaic panel based on neural network and VHDL-language. In fact, an experimental database of meteorological data (irradiation, temperature) and output electrical generation signals of the PV-panel (current and voltage) has been used in this study. The inputs of the ANN-PV-panel are the daily total irradiation and mean average temperature while the outputs are the current and voltage generated from the panel. Firstly, a dataset of 4x364 have been used for training the network. Subsequently, the neural network (MLP) corresponding to PV-panel is simulated using VHDL language based on the saved weights and bias of the network. Simulation results of the trained MLP-PV panel based on Matlab and VHDL are presented. The proposed PV-panel model based ANN and VHDL permit to evaluate the performance PV-panel using only the environmental factors and involves less computational efforts, and it can be used for predicting the output electrical energy from the PV-panel.

Mekki, H.; Belhout, K. [Department of Electronics, RASIC laboratory BLIDA UniversityBLIDA (Algeria); Mellit, A.; Salhi, H. [Department of Electronics, Control laboratory BLIDA UniversityBLIDA (Algeria)

2008-06-12T23:59:59.000Z

207

Experimental investigation of wind effect on solar panels.  

E-Print Network [OSTI]

??Photovoltaic Solar Panels for electricity generation are outdoor low-rise structures that are vulnerable to damage by the wind. The existing building codes do not contain… (more)

Abiola-Ogedengbe, Ayodeji

2013-01-01T23:59:59.000Z

208

"PBS NEWSHOUR" covers new technique that may make solar panel...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Scientists have developed a more efficient method of creating the material that makes solar panels work, according to a report published this week, which researchers say could...

209

Effects of solar photovoltaic panels on roof heat transfer  

E-Print Network [OSTI]

the energy performance of  photovoltaic roofs, ASHRAE Trans A thermal model for photovoltaic systems, Solar Energy, Effects of Solar Photovoltaic Panels on Roof Heat Transfer 

Dominguez, Anthony; Kleissl, Jan; Luvall, Jeffrey C

2011-01-01T23:59:59.000Z

210

City and County of Denver- Solar Panel Permitting (Colorado)  

Broader source: Energy.gov [DOE]

Construction, Electrical, Plumbing and Zoning Permits* are required for Photovoltaic (PV) systems installed in the city of Denver. Denver provides same day permit review for most solar panel...

211

ADVANCED REFLECTIVE FILMS AND PANELS FOR NEXT GENERATION SOLAR...  

Broader source: Energy.gov (indexed) [DOE]

film based panel -formed at high accuracy (<1.5 mrad RMS slope error) Adaptive optics (minimizes canting errors) Space frame based support structure Operation and...

212

Study of Alternative Approaches for Transite Panel Removal |...  

Broader source: Energy.gov (indexed) [DOE]

(BJC) assembled an experienced team from both sites to evaluate both the manual and mechanical methods of transite panel removal. Study of Alternative Approaches for Transite...

213

Solar panels as cosmic-ray detectors  

E-Print Network [OSTI]

Due to fundamental limitations of accelerators, only cosmic rays can give access to centre-of- mass energies more than one order of magnitude above those reached at the LHC. In fact, extreme energy cosmic rays (1018 eV - 1020 eV) are the only possibility to explore the 100 TeV energy scale in the years to come. This leap by one order of magnitude gives a unique way to open new horizons: new families of particles, new physics scales, in-depth investigations of the Lorentz symmetries. However, the flux of cosmic rays decreases rapidly, being less than one particle per square kilometer per year above 1019 eV: one needs to sample large surfaces. A way to develop large-effective area, low cost, detectors, is to build a solar panel-based device which can be used in parallel for power generation and Cherenkov light detection. Using solar panels for Cherenkov light detection would combine power generation and a non-standard detection device.

Stella, Carlo; Assis, Pedro; Brogueira, Pedro; Santo, Catarina Espirito; Goncalves, Patricia; Pimenta, Mario; De Angelis, Alessandro

2014-01-01T23:59:59.000Z

214

Compact x-ray source and panel  

DOE Patents [OSTI]

A compact, self-contained x-ray source, and a compact x-ray source panel having a plurality of such x-ray sources arranged in a preferably broad-area pixelized array. Each x-ray source includes an electron source for producing an electron beam, an x-ray conversion target, and a multilayer insulator separating the electron source and the x-ray conversion target from each other. The multi-layer insulator preferably has a cylindrical configuration with a plurality of alternating insulator and conductor layers surrounding an acceleration channel leading from the electron source to the x-ray conversion target. A power source is connected to each x-ray source of the array to produce an accelerating gradient between the electron source and x-ray conversion target in any one or more of the x-ray sources independent of other x-ray sources in the array, so as to accelerate an electron beam towards the x-ray conversion target. The multilayer insulator enables relatively short separation distances between the electron source and the x-ray conversion target so that a thin panel is possible for compactness. This is due to the ability of the plurality of alternating insulator and conductor layers of the multilayer insulators to resist surface flashover when sufficiently high acceleration energies necessary for x-ray generation are supplied by the power source to the x-ray sources.

Sampayon, Stephen E. (Manteca, CA)

2008-02-12T23:59:59.000Z

215

Dual circuit embossed sheet heat transfer panel  

DOE Patents [OSTI]

A heat transfer panel provides redundant cooling for fusion reactors or the like environment requiring low-mass construction. Redundant cooling is provided by two independent cooling circuits, each circuit consisting of a series of channels joined to inlet and outlet headers. The panel comprises a welded joinder of two full-size and two much smaller partial-size sheets. The first full-size sheet is embossed to form first portions of channels for the first and second circuits, as well as a header for the first circuit. The second full-sized sheet is then laid over and welded to the first full-size sheet. The first and second partial-size sheets are then overlaid on separate portions of the second full-sized sheet, and are welded thereto. The first and second partial-sized sheets are embossed to form inlet and outlet headers, which communicate with channels of the second circuit through apertures formed in the second full-sized sheet. 6 figs.

Morgan, G.D.

1984-02-21T23:59:59.000Z

216

Apparatus for distilling shale oil from oil shale  

SciTech Connect (OSTI)

An apparatus for distilling shale oil from oil shale comprises: a vertical type distilling furnace which is divided by two vertical partitions each provided with a plurality of vent apertures into an oil shale treating chamber and two gas chambers, said oil shale treating chamber being located between said two gas chambers in said vertical type distilling furnace, said vertical type distilling furnace being further divided by at least one horizontal partition into an oil shale distilling chamber in the lower part thereof and at least one oil shale preheating chamber in the upper part thereof, said oil shale distilling chamber and said oil shale preheating chamber communication with each other through a gap provided at an end of said horizontal partition, an oil shale supplied continuously from an oil shale supply port provided in said oil shale treating chamber at the top thereof into said oil shale treating chamber continuously moving from the oil shale preheating chamber to the oil shale distilling chamber, a high-temperature gas blown into an oil shale distilling chamber passing horizontally through said oil shale in said oil shale treating chamber, thereby said oil shale is preheated in said oil shale preheating chamber, and a gaseous shale oil is distilled from said preheated oil shale in said oil shale distilling chamber; and a separator for separating by liquefaction a gaseous shale oil from a gas containing the gaseous shale oil discharged from the oil shale preheating chamber.

Shishido, T.; Sato, Y.

1984-02-14T23:59:59.000Z

217

Libyan oil industry  

SciTech Connect (OSTI)

Three aspects of the growth and progress of Libya's oil industry since the first crude oil discovery in 1961 are: (1) relations between the Libyan government and the concessionary oil companies; (2) the impact of Libyan oil and events in Libya on the petroleum markets of Europe and the world; and (3) the response of the Libyan economy to the development of its oil industry. The historical review begins with Libya's becoming a sovereign nation in 1951 and traces its subsequent development into a position as a leading world oil producer. 54 references, 10 figures, 55 tables.

Waddams, F.C.

1980-01-01T23:59:59.000Z

218

Canada's Arctic Gateway: Discussion Paper Summary  

E-Print Network [OSTI]

Canada's Arctic Gateway: Discussion Paper Summary September 2010 The following summarizes key Canada's Arctic Gateway a reality in terms of both national public policy and international presence the Government of Canada's national gateway policy framework. This discussion paper's use of the term "Arctic

Martin, Jeff

219

For discussion only Phase Two Process  

E-Print Network [OSTI]

For discussion only 1 Phase Two Process 1 Revised per Advisory Committee 10/20/11Advisory Reviews Input on Select Opportunities and Charges AE to Begin Solution Development Process Organizes Work, Identifies Business Process Owners and Affected Constituent, and Refines Data Analysis #12;For discussion

Sheridan, Jennifer

220

Oil and Gas Supply Module  

Gasoline and Diesel Fuel Update (EIA)

Onshore Lower 48 Oil and Gas Supply Submodule, Offshore Oil and Gas Supply Submodule, Oil Shale Supply Submodule1, and Alaska Oil and Gas Supply Submodule. A detailed description...

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Oil and Gas Supply Module  

Gasoline and Diesel Fuel Update (EIA)

Onshore Lower 48 Oil and Gas Supply Submodule, Offshore Oil and Gas Supply Submodule, Oil Shale Supply Submodule, and Alaska Oil and Gas Supply Submodule. A detailed description of...

222

REVIEW PAPER Biodeterioration of crude oil and oil derived  

E-Print Network [OSTI]

, the majority of applied microbiologi- cal methods of enhanced oil recovery also dete- riorates oil and appearsREVIEW PAPER Biodeterioration of crude oil and oil derived products: a review Natalia A. Yemashova January 2007 Ó Springer Science+Business Media B.V. 2007 Abstract Biodeterioration of crude oil and oil

Appanna, Vasu

223

Using Oils As Pesticides  

E-Print Network [OSTI]

Petroleum and plant-derived spray oils show increasing potential for use as part of Integrated Pest Management systems for control of soft-bodied pests on fruit trees, shade trees, woody ornamentals and household plants. Sources of oils, preparing...

Bogran, Carlos E.; Ludwig, Scott; Metz, Bradley

2006-10-30T23:59:59.000Z

224

Oil and Gas Exploration  

E-Print Network [OSTI]

Metals Industrial Minerals Oil and Gas Geothermal Exploration Development Mining Processing Nevada, oil and gas, and geothermal activities and accomplishments in Nevada: production statistics, exploration and development including drilling for petroleum and geothermal resources, discoveries of ore

Tingley, Joseph V.

225

Understanding Crude Oil Prices  

E-Print Network [OSTI]

an alternative investment strategy to buying oil today andinvestments necessary to catch up. This was the view o?ered by oilinvestment strategy. date t) in order to purchase a quantity Q barrels of oil

Hamilton, James Douglas

2008-01-01T23:59:59.000Z

226

Gas and Oil (Maryland)  

Broader source: Energy.gov [DOE]

The Department of the Environment has the authority to enact regulations pertaining to oil and gas production, but it cannot prorate or limit the output of any gas or oil well. A permit from the...

227

China's Global Oil Strategy  

E-Print Network [OSTI]

21, 2008. Ying, Wang. “ China, Venezuela firms to co-developApril 21, “China and Venezuela sign oil agreements. ” Chinaaccessed April 21, “Venezuela and China sign oil deal. ” BBC

Thomas, Bryan G

2009-01-01T23:59:59.000Z

228

Oil Sands Feedstocks  

Broader source: Energy.gov (indexed) [DOE]

NCUT National Centre for Upgrading Technology 'a Canada-Alberta alliance for bitumen and heavy oil research' Oil Sands Feedstocks C Fairbridge, Z Ring, Y Briker, D Hager National...

229

SRC Residual fuel oils  

DOE Patents [OSTI]

Coal solids (SRC) and distillate oils are combined to afford single-phase blends of residual oils which have utility as fuel oils substitutes. The components are combined on the basis of their respective polarities, that is, on the basis of their heteroatom content, to assure complete solubilization of SRC. The resulting composition is a fuel oil blend which retains its stability and homogeneity over the long term.

Tewari, Krishna C. (Whitehall, PA); Foster, Edward P. (Macungie, PA)

1985-01-01T23:59:59.000Z

230

Laboratory methods for enhanced oil recovery core floods  

SciTech Connect (OSTI)

Current research at the Idaho National Engineering Laboratory (INEL) is investigating microbially enhanced oil recovery (MEOR) systems for application to oil reservoirs. Laboratory corefloods are invaluable in developing technology necessary for a field application of MEOR. Methods used to prepare sandstone cores for experimentation, coreflooding techniques, and quantification of coreflood effluent are discussed in detail. A technique to quantify the small volumes of oil associated with laboratory core floods is described.

Robertson, E.P.; Bala, G.A.; Thomas, C.P.

1994-03-01T23:59:59.000Z

231

Biochemical upgrading of oils  

DOE Patents [OSTI]

A process for biochemical conversion of heavy crude oils is provided. The process includes contacting heavy crude oils with adapted biocatalysts. The resulting upgraded oil shows, a relative increase in saturated hydrocarbons, emulsions and oxygenates and a decrease in compounds containing organic sulfur, organic nitrogen and trace metals. Adapted microorganisms which have been modified under challenged growth processes are also disclosed. 121 figs.

Premuzic, E.T.; Lin, M.S.

1999-01-12T23:59:59.000Z

232

MACHINE LEARNING IN A DYNAMIC WORLD Panel Dmussion  

E-Print Network [OSTI]

MACHINE LEARNING IN A DYNAMIC WORLD Panel Dmussion Miecsyslaw M. Kohr Panel O&m and Editor. Michal~gi,George Mason University R.S.Sutton, GTE Laboratories Machine Learning was established of machine learning research was in Cybernetic Systems and Adaptive Control. Machine Learning has been

Antsaklis, Panos

233

MEASUREMENT OF MIRROR PANELS USING COLOURED PATTERN DEFLECTOMETRY  

E-Print Network [OSTI]

and parabolic dish solar concentrators. Factory production of mirror panels also requires accurate measurementsMEASUREMENT OF MIRROR PANELS USING COLOURED PATTERN DEFLECTOMETRY Paul M. Scott1 , and Greg Burgess2 1 Research Assistant, Solar Thermal Group, Australian National University (ANU), Building 32 North

234

Fundamental Neutron Physics Beamline Review Panel Report 31 October 2002  

E-Print Network [OSTI]

Fundamental Neutron Physics Beamline Review Panel Report 31 October 2002 The Fundamental Neutron Physics Beamline Review Panel met at the SNS Headquarters on October 17, 2002. We received presentations and astrophysics calculations such as the solar neutrino flux. Those quantities are also used in efforts

235

Developing courseware to support online discussion  

E-Print Network [OSTI]

For my Master of Engineering thesis, I designed and implemented an online discussion forum in an attempt to improve student learning. Aided with the help of Professor Jonathon Cummings 15.351 course (Introduction to ...

Wang, Benjamin Luke

2005-01-01T23:59:59.000Z

236

Ultrathin optical panel and a method of making an ultrathin optical panel  

DOE Patents [OSTI]

An ultrathin optical panel, and a method of producing an ultrathin optical panel, are disclosed, including stacking a plurality of glass sheets, which sheets may be coated with a transparent cladding substance or may be uncoated, fastening together the plurality of stacked coated glass sheets using an epoxy or ultraviolet adhesive, applying uniform pressure to the stack, curing the stack, sawing the stack to form an inlet face on a side of the stack and an outlet face on an opposed side of the stack, bonding a coupler to the inlet face of the stack, and fastening the stack, having the coupler bonded thereto, within a rectangular housing having an open front which is aligned with the outlet face, the rectangular housing having therein a light generator which is optically aligned with the coupler. The light generator is preferably placed parallel to and proximate with the inlet face, thereby allowing for a reduction in the depth of the housing.

Biscardi, Cyrus (Bellport, NY); Brewster, Calvin (North Patchogue, NY); DeSanto, Leonard (Patchogue, NY); Veligdan, James T. (Manorville, NY)

2003-02-11T23:59:59.000Z

237

Ultrathin Optical Panel And A Method Of Making An Ultrathin Optical Panel.  

DOE Patents [OSTI]

An ultrathin optical panel, and a method of producing an ultrathin optical panel, are disclosed, including stacking a plurality of glass sheets, which sheets may be coated with a transparent cladding substance or may be uncoated, fastening together the plurality of stacked coated glass sheets using an epoxy or ultraviolet adhesive, applying uniform pressure to the stack, curing the stack, sawing the stack to form an inlet face on a side of the stack and an outlet face on an opposed side of the stack, bonding a coupler to the inlet face of the stack, and fastening the stack, having the coupler bonded thereto, within a rectangular housing having an open front which is aligned with the outlet face, the rectangular housing having therein a light generator which is optically aligned with the coupler. The light generator is preferably placed parallel to and proximate with the inlet face, thereby allowing for a reduction in the depth of the housing.

Biscardi, Cyrus (Bellport, NY); Brewster, Calvin (North Patchoque, NY); DeSanto, Leonard (Patchoque, NY); Veligdan, James T. (Manorville, NY)

2005-02-15T23:59:59.000Z

238

Ultrathin optical panel and a method of making an ultrathin optical panel  

DOE Patents [OSTI]

An ultrathin optical panel, and a method of producing an ultrathin optical panel, are disclosed, including stacking a plurality of glass sheets, which sheets may be coated With a transparent cladding substance or may be uncoated, fastening together the plurality of stacked coated glass sheets using an epoxy or ultraviolet adhesive, applying uniform pressure to the stack, curing the stack, sawing the stack to form an inlet face on a side of the stack and an outlet face on an opposed side of the stack, bonding a coupler to the inlet face of the stack, and fastening the stack, having the coupler bonded thereto, within a rectangular housing having an open front which is aligned with the outlet face, the rectangular housing having therein a light generator which is optically aligned with the coupler. The light generator is preferably placed parallel to and proximate with the inlet face, thereby allowing for a reduction in the depth of the housing.

Biscardi, Cyrus (Bellport, NY); Brewster, Calvin (North Patchogue, NY); DeSanto, Leonard (Patchogue, NY); Veligdan, James T. (Manorville, NY)

2002-01-01T23:59:59.000Z

239

Ultrathin optical panel and a method of making an ultrathin optical panel  

DOE Patents [OSTI]

An ultrathin optical panel, and a method of producing an ultrathin optical panel, are disclosed, including stacking a plurality of glass sheets, which sheets may be coated with a transparent cladding substance or may be uncoated, fastening together the plurality of stacked coated glass sheets using an epoxy or ultraviolet adhesive, applying uniform pressure to the stack, curing the stack, sawing the stack to form an inlet face on a side of the stack and an outlet face on an opposed side of the stack, bonding a coupler to the inlet face of the stack, and fastening the stack, having the coupler bonded thereto, within a rectangular housing having an open front which is aligned with the outlet face, the rectangular housing having therein a light generator which is optically aligned with the coupler. The light generator is preferably placed parallel to and proximate with the inlet face, thereby allowing for a reduction in the depth of the housing.

Biscardi, Cyrus (Bellport, NY); Brewster, Calvin (North Patchogue, NY); DeSanto, Leonard (Patchogue, NY); Veligdan, James T. (Manorville, NY)

2001-10-09T23:59:59.000Z

240

Ultrathin Optical Panel And A Method Of Making An Ultrathin Optical Panel.  

DOE Patents [OSTI]

An ultrathin optical panel, and a method of producing an ultrathin optical panel, are disclosed, including stacking a plurality of glass sheets, which sheets may be coated with a transparent cladding substance or may be uncoated, fastening together the plurality of stacked coated glass sheets using an epoxy or ultraviolet adhesive, applying uniform pressure to the stack, curing the stack, sawing the stack to form an inlet face on a side of the stack and an outlet face on an opposed side of the stack, bonding a coupler to the inlet face of the stack, and fastening the stack, having the coupler bonded thereto, within a rectangular housing having an open front which is aligned with the outlet face, the rectangular housing having therein a light generator which is optically aligned with the coupler. The light generator is preferably placed parallel to and proximate with the inlet face, thereby allowing for a reduction in the depth of the housing.

Biscardi, Cyrus (Bellport, NY); Brewster, Calvin (North Patchogue, NY); DeSanto, Leonard (Patchogue, NY); Veligdan, James T. (Manorville, NY)

2005-05-17T23:59:59.000Z

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Oil shale program plan, FY 1989  

SciTech Connect (OSTI)

The oil shale program is directed to the development of advanced technologies for extracting shale oil from the large domestic resources. The overall goal is to foster development of an economically competitive and environmentally acceptable oil shale industry. A series of technology development steps must be taken by DOE, other government agencies and other governments and/or industry to achieve this goal. They include basic and applied R and D, proof-of-concept activities, first-of-a-kind field tests and associated commercial-scale activity. Activities associated with the oil shale program are designed to: Expand the technically recoverable resource base, increase recovery efficiency, reduce capital and operating costs and/or enhance environmental acceptability. In support of the overall program goal, oil shale research has two major technical goals: (1) Technology Base Development. To produce an engineering and scientific information base for industry use in designing and developing oil shale processes with reduced costs and enhanced environmental acceptability and to foster the development of novel oil shale processes and, (2) Environmental Mitigation. To develop a comprehensive data base on pollutant generation and the steps required to mitigate the impacts in a cost-effective manner. This report discusses the above goals. 9 refs., 1 fig., 1 tab.

Not Available

1989-06-01T23:59:59.000Z

242

Utah Heavy Oil Program  

SciTech Connect (OSTI)

The Utah Heavy Oil Program (UHOP) was established in June 2006 to provide multidisciplinary research support to federal and state constituents for addressing the wide-ranging issues surrounding the creation of an industry for unconventional oil production in the United States. Additionally, UHOP was to serve as an on-going source of unbiased information to the nation surrounding technical, economic, legal and environmental aspects of developing heavy oil, oil sands, and oil shale resources. UHOP fulGilled its role by completing three tasks. First, in response to the Energy Policy Act of 2005 Section 369(p), UHOP published an update report to the 1987 technical and economic assessment of domestic heavy oil resources that was prepared by the Interstate Oil and Gas Compact Commission. The UHOP report, entitled 'A Technical, Economic, and Legal Assessment of North American Heavy Oil, Oil Sands, and Oil Shale Resources' was published in electronic and hard copy form in October 2007. Second, UHOP developed of a comprehensive, publicly accessible online repository of unconventional oil resources in North America based on the DSpace software platform. An interactive map was also developed as a source of geospatial information and as a means to interact with the repository from a geospatial setting. All documents uploaded to the repository are fully searchable by author, title, and keywords. Third, UHOP sponsored Give research projects related to unconventional fuels development. Two projects looked at issues associated with oil shale production, including oil shale pyrolysis kinetics, resource heterogeneity, and reservoir simulation. One project evaluated in situ production from Utah oil sands. Another project focused on water availability and produced water treatments. The last project considered commercial oil shale leasing from a policy, environmental, and economic perspective.

J. Bauman; S. Burian; M. Deo; E. Eddings; R. Gani; R. Goel; C.K. Huang; M. Hogue; R. Keiter; L. Li; J. Ruple; T. Ring; P. Rose; M. Skliar; P.J. Smith; J.P. Spinti; P. Tiwari; J. Wilkey; K. Uchitel

2009-10-20T23:59:59.000Z

243

1 | Forestry, sustainable behaviours and behaviour change: Discussion paper |2012| Discussion Paper: Behaviour Change  

E-Print Network [OSTI]

1 | Forestry, sustainable behaviours and behaviour change: Discussion paper |2012| Discussion Paper: Behaviour Change Forestry, sustainable behaviours and behaviour change ­ a discussion paper1 Introduction This discussion paper explores what the current focus on behaviour means for the forestry sector, using evidence

244

Discussion Draft of the Preliminary Cybersecurity Framework Discussion Draft of the Preliminary  

E-Print Network [OSTI]

1 Discussion Draft of the Preliminary Cybersecurity Framework Discussion Draft of the Preliminary Cybersecurity Framework August 28, 2013 #12;5 10 15 20 25 30 35 Discussion Draft of the Preliminary Cybersecurity Framework 2 3 A Discussion Draft of the Preliminary Cybersecurity Framework for improving critical

Bentz, Dale P.

245

Manufacture of refrigeration oils  

SciTech Connect (OSTI)

Lubricating oils suitable for use in refrigeration equipment in admixture with fluorinated hydrocarbon refrigerants are produced by solvent extraction of naphthenic lubricating oil base stocks, cooling the resulting extract mixture, optionally with the addition of a solvent modifier, to form a secondary raffinate and a secondary extract, and recovering a dewaxed oil fraction of lowered pour point from the secondary raffinate as a refrigeration oil product. The process of the invention obviates the need for a separate dewaxing operation, such as dewaxing with urea, as conventionally employed for the production of refrigeration oils.

Chesluk, R.P.; Platte, H.J.; Sequeira, A.J.

1981-12-08T23:59:59.000Z

246

Transporting US oil imports: The impact of oil spill legislation on the tanker market  

SciTech Connect (OSTI)

The Oil Pollution Act of 1990 ( OPA'') and an even more problematic array of State pollution laws have raised the cost, and risk, of carrying oil into and out of the US. This report, prepared under contract to the US Department of energy's Office of Domestic and International Policy, examines the impact of Federal and State oil spill legislation on the tanker market. It reviews the role of marine transportation in US oil supply, explores the OPA and State oil spill laws, studies reactions to OPA in the tanker and tank barge industries and in related industries such as insurance and ship finance, and finally, discusses the likely developments in the years ahead. US waterborne oil imports amounted to 6.5 million B/D in 1991, three-quarters of which was crude oil. Imports will rise by almost 3 million B/D by 2000 according to US Department of energy forecasts, with most of the crude oil growth after 1995. Tanker demand will grow even faster: most of the US imports and the increased traffic to other world consuming regions will be on long-haul trades. Both the number of US port calls by tankers and the volume of offshore lightering will grow. Every aspect of the tanker industry's behavior is affected by OPA and a variety of State pollution laws.

Rowland, P.J. (Rowland (P.) Associates (United States))

1992-05-01T23:59:59.000Z

247

Conference Discussion of the Nuclear Force  

SciTech Connect (OSTI)

Discussion of the nuclear force, lead by a round table consisting of T. Cohen, E. Epelbaum, R. Machleidt, and F. Gross (chair). After an invited talk by Machleidt, published elsewhere in these proceedings, brief remarks are made by Epelbaum, Cohen, and Gross, followed by discussion from the floor moderated by the chair. The chair asked the round table and the participants to focus on the following issues: (1)What does each approach (chiral effective field theory, large Nc, and relativistic phenomenology) contribute to our knowledge of the nuclear force? Do we need them all? Is any one transcendent? (2) How important for applications (few body, nuclear structure, EMC effect, for example) are precise fits to the NN data below 350 MeV? How precise do these fits have to be? (3) Can we learn anything about nonperturbative QCD from these studies of the nuclear force? The discussion presented here is based on a video recording made at the conference and transcribed afterward.

Franz Gross,Thomas D. Cohen,Evgeny Epelbaum,R. Machleidt

2010-12-01T23:59:59.000Z

248

POLICY FLASH 2014-25 Revision to the Procurement Strategy Panel...  

Energy Savers [EERE]

5 Revision to the Procurement Strategy Panel (PSP) Briefing Process POLICY FLASH 2014-25 Revision to the Procurement Strategy Panel (PSP) Briefing Process For DOE questions...

249

Carcinogenicity Studies of Estonian Oil Shale Soots  

E-Print Network [OSTI]

determine the carcinogenicity of Estonian oil shale soot as well as the soot from oil shale fuel oil. All

A. Vosamae

250

OIL EXPOSURE AND CHRONIC HEALTH EFFECTS ON INDIGENOUS POPULATIONS IN SOUTH AMERICA.  

E-Print Network [OSTI]

??There is an ongoing discussion on whether the activity of oil companies and its environmental impacts are a threat for the health of the populations… (more)

Gascon Merlos, M.

2009-01-01T23:59:59.000Z

251

Discussion Papers in Economics Department of Economics  

E-Print Network [OSTI]

Discussion Papers in Economics Department of Economics University of Surrey Guildford Surrey GU2 7 participants at Aberdeen, Essex, LSE, UCL, the Paris School of Economics and from participants in the 2007 Royal Economic Society annual conference held in Warwick, the 2007 American Law and Economics

Doran, Simon J.

252

Earth: The Early Years We discuss ...  

E-Print Network [OSTI]

Earth: The Early Years We discuss ... · What happened to the Earth during the first few billion)? · What is the relationship to (early) life? #12;Age of Earth James Ussher (17th C) biblical account: 6: 20-40 m.y. (million years!) Charles Darwin evolution >300 m.y. Lord Kelvin (1880's) cooling Earth: 50

253

STUDENT CONDUCT CODE REVIEW/DISCUSSION  

E-Print Network [OSTI]

STUDENT CONDUCT CODE REVISION REVIEW/DISCUSSION Student Conduct Code Revision Workgroup #12;Agenda Introductions/Purpose History of the Student Conduct Code Revision Workgroup Highlights of the Draft Revision Introduction: Principles Promoting Student Responsibility Jurisdiction Conduct in Violation of Community

Fainman, Yeshaiahu

254

Draft for Discussion University of Saskatchewan  

E-Print Network [OSTI]

Draft for Discussion 1 University of Saskatchewan Vision 2025: From Spirit to Action Our Mission: The University of Saskatchewan is a member of the Canada's leading research-intensive universities, the U15 as Saskatchewan's first university, the U of S has always valued applied research leading to important gains

Peak, Derek

255

Consulting Assistance on Economic Discussion Papers  

E-Print Network [OSTI]

Consulting Assistance on Economic Reform II Discussion Papers The objectives of the Consulting Assistance on Economic Reform (CAER II) project are to contribute to broad-based and sustainable economic, Bureau for Global Programs, Field Support and Research, Center for Economic Growth and Agricultural

256

EFFECTS OF OIL ON MARINE ECOSYSTEMS: A REVIEW FOR ADMINISTRATORS AND POLICY MAKERS  

E-Print Network [OSTI]

EFFECTS OF OIL ON MARINE ECOSYSTEMS: A REVIEW FOR ADMINISTRATORS AND POLICY MAKERS DALE R. EVANS1 is reviewed. The focus is on studies on crude oil. and the results are discussed with the purpose of providing in decisions concerning petroleum developments and related activities. The characteristics ofcrude oil

257

Crude Oil Analysis Database  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

The composition and physical properties of crude oil vary widely from one reservoir to another within an oil field, as well as from one field or region to another. Although all oils consist of hydrocarbons and their derivatives, the proportions of various types of compounds differ greatly. This makes some oils more suitable than others for specific refining processes and uses. To take advantage of this diversity, one needs access to information in a large database of crude oil analyses. The Crude Oil Analysis Database (COADB) currently satisfies this need by offering 9,056 crude oil analyses. Of these, 8,500 are United States domestic oils. The database contains results of analysis of the general properties and chemical composition, as well as the field, formation, and geographic location of the crude oil sample. [Taken from the Introduction to COAMDATA_DESC.pdf, part of the zipped software and database file at http://www.netl.doe.gov/technologies/oil-gas/Software/database.html] Save the zipped file to your PC. When opened, it will contain PDF documents and a large Excel spreadsheet. It will also contain the database in Microsoft Access 2002.

Shay, Johanna Y.

258

Exploration for heavy crude oil and natural bitumen  

SciTech Connect (OSTI)

This book discusses heavy oil and tar sand reserves which are enormous. Focus in on regional resources worldwide; characterization, maturation, and degradation; geological environments and migration; exploration methods; exploration histories; and recovery.

Meyer, R.F. (U.S. Geological Survey (US))

1987-01-01T23:59:59.000Z

259

Oil, Water, and Wildlife: The Gulf of Mexico Disaster and Related Environmental Issues  

SciTech Connect (OSTI)

The BP Macondo oil field spill in the Gulf of Mexico is the largest oil spill in U.S. history and has the potential to impact sea turtle and marine mammal populations, and others. This presentation will review the genotoxic effects of oil exposure in wildlife and discuss the potential for an oil spill to impact wildlife populations. Whereas some aspects of a spill are predictable, each spill is different because oils are highly variable, as are the environments in which they occur. The presentation will discuss what has been learned from previous spills, including the Exxon Valdez and the soviet oil legacy in Azerbaijan, and the potential dangers of offshore oil development in the Arctic. Related Purdue University research efforts in oil-spill related engineering and science also will be highlighted.

Bickman, John W. [Purdue University

2010-08-04T23:59:59.000Z

260

Plan for addressing issues relating to oil shale plant siting  

SciTech Connect (OSTI)

The Western Research Institute plan for addressing oil shale plant siting methodology calls for identifying the available resources such as oil shale, water, topography and transportation, and human resources. Restrictions on development are addressed: land ownership, land use, water rights, environment, socioeconomics, culture, health and safety, and other institutional restrictions. Descriptions of the technologies for development of oil shale resources are included. The impacts of oil shale development on the environment, socioeconomic structure, water availability, and other conditions are discussed. Finally, the Western Research Institute plan proposes to integrate these topics to develop a flow chart for oil shale plant siting. Western Research Institute has (1) identified relative topics for shale oil plant siting, (2) surveyed both published and unpublished information, and (3) identified data gaps and research needs. 910 refs., 3 figs., 30 tabs.

Noridin, J. S.; Donovan, R.; Trudell, L.; Dean, J.; Blevins, A.; Harrington, L. W.; James, R.; Berdan, G.

1987-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Beginning of an oil shale industry in Australia  

SciTech Connect (OSTI)

This paper discusses how preparations are being made for the construction and operation of a semi commercial plant to process Australian oil shale. This plant is primarily designed to demonstrate the technical feasibility of processing these shales at low cost. Nevertheless it is expected to generate modest profits even at this demonstration level. This will be the first step in a three staged development of one of the major Australian oil shale deposits which may ultimately provide nearly 10% of Australia's anticipated oil requirements by the end of the century. In turn this development should provide the basis for a full scale oil shale industry in Australia based upon the advantageously disposed oil shale deposits there. New sources of oil are becoming critical since Australian production is declining rapidly while consumption is accelerating.

Wright, B. (Southern Pacific Petroleum NL, 143 Macquarie Street, Sydney (AU))

1989-01-01T23:59:59.000Z

262

World Oil: Market or Mayhem?  

E-Print Network [OSTI]

The world oil market is regarded by many as a puzzle. Why are oil prices so volatile? What is OPEC and what does OPEC do? Where are oil prices headed in the long run? Is “peak oil” a genuine concern? Why did oil prices ...

Smith, James L.

2008-01-01T23:59:59.000Z

263

Information tracking and sharing in organic photovoltaic panel manufacturing  

E-Print Network [OSTI]

The MIT MEng team of four worked with Konarka Technologies, a world leading organic solar panel manufacturer, on production tracking and analysis as well as various operational improvement projects. MIT's collaborative ...

Gong, Ming, M. Eng. Massachusetts Institute of Technology

2011-01-01T23:59:59.000Z

264

Panel on Data Usage Management: Technology or Regulation?  

E-Print Network [OSTI]

1 Panel on Data Usage Management: Technology or Regulation? Prof. Ravi Sandhu Executive Director about data usage management Users Enterprises Researchers What can be done Technical Regulatory care about data usage management Users Enterprises Researchers What can be done Technical

Sandhu, Ravi

265

Arkansas Students Get Their Hands Dirty in Solar Panel Project...  

Broader source: Energy.gov (indexed) [DOE]

at-risk youth graduate from high school. "Having been in the military and stationed in Germany, I saw a magazine article about German farmers who install solar panels on the...

266

Dynamic instabilities imparted by CubeSat deployable solar panels  

E-Print Network [OSTI]

In this work, multibody dynamics simulation was used to investigate the effects of solar panel deployment on CubeSat attitude dynamics. Nominal and partial/asymmetric deployments were simulated for four different solar ...

Peters, Eric David

2014-01-01T23:59:59.000Z

267

Independent Scientific Review Panel Retrospective Report 1997 2005  

E-Print Network [OSTI]

Independent Scientific Review Panel Retrospective Report 1997 ­ 2005 ISRP 2005-14 August 31, 2005 graphics used in this report. #12;ISRP Retrospective Report 1997 - 2005 Executive Summary.....................................................................

268

Effects of solar photovoltaic panels on roof heat transfer  

E-Print Network [OSTI]

Itron Inc. , CPUC California Solar Initiative 2009 Impact hot  days found by the California Solar Initiative impact solar photovoltaic (PV) panels were conducted in  San Diego, California.  

Dominguez, Anthony; Kleissl, Jan; Luvall, Jeffrey C

2011-01-01T23:59:59.000Z

269

Kingspan Insulated Panels: Proposed Penalty (2013-CE-5353)  

Broader source: Energy.gov [DOE]

DOE alleged in a Notice of Proposed Civil Penalty that Kingspan Insulated Panels, Inc. failed to certify a variety of walk-in cooler or freezer components as compliant with the applicable energy conservation standards.

270

Seismic retrofit of precast panel buildings in Eastern Europe  

E-Print Network [OSTI]

Many countries in Eastern Europe, particularly ones from the former Soviet Bloc, are facing a potential crisis regarding their deteriorating precast panel apartment buildings. These complexes were built using industrial ...

Tzonev, Tzonu

2013-01-01T23:59:59.000Z

271

advisory panel open: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Effective Fabrication of a Solar PV Panel for LED Lighting CiteSeer Summary: Abstract Solar cells are very fragile so they need a encapsulant and encasing for protection and...

272

advisory panel notice: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Effective Fabrication of a Solar PV Panel for LED Lighting CiteSeer Summary: Abstract Solar cells are very fragile so they need a encapsulant and encasing for protection and...

273

ashp expert panel: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Effective Fabrication of a Solar PV Panel for LED Lighting CiteSeer Summary: Abstract Solar cells are very fragile so they need a encapsulant and encasing for protection and...

274

Panel data analysis of U.S. coal productivity  

E-Print Network [OSTI]

We analyze labor productivity in coal mining in the United States using indices of productivity change associated with the concepts of panel data modeling. This approach is valuable when there is extensive heterogeneity ...

Stoker, Thomas M.

2000-01-01T23:59:59.000Z

275

Limited Dependent Variable Correlated Random Coefficient Panel Data Models  

E-Print Network [OSTI]

OF CONTENTS : : : : : : : : : : : : : : : : : : : : : : : : : : : : : vii LIST OF TABLES : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : ix 1. INTRODUCTION : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 1 1.1 Linear Models... : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 2 1.2 Binary Response Models : : : : : : : : : : : : : : : : : : : : : : : : : 3 1.3 Truncated Models : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 6 2. LINEAR CRC PANEL DATA MODELS : : : : : : : : : : : : : : : : : : 8 2.1...

Liang, Zhongwen

2012-10-19T23:59:59.000Z

276

Oil and Gas (Indiana)  

Broader source: Energy.gov [DOE]

This division of the Indiana Department of Natural Resources provides information on the regulation of oil and gas exploration, wells and well spacings, drilling, plugging and abandonment, and...

277

Solar panels as air Cherenkov detectors for extremely high energy cosmic rays  

E-Print Network [OSTI]

Increasing interest towards the observation of the highest energy cosmic rayshas motivated the development of new detection techniques. The properties ofthe Cherenkov photon pulse emitted in the atmosphere by these very rareparticles indicate low-cost semiconductor detectors as good candidates fortheir optical read-out. The aim of this paper is to evaluate the viability of solar panels for thispurpose. The experimental framework resulting from measurements performed withsuitably-designed solar cells and large conventional photovoltaic areas ispresented. A discussion on the obtained and achievable sensitivities follows.

Cecchini, S; Esposti, L D; Giacomelli, G; Guerra, M; Lax, I; Mandrioli, G; Parretta, A; Sarno, A; Schioppo, R; Sorel, M; Spurio, M

2000-01-01T23:59:59.000Z

278

Solar panels as air Cherenkov detectors for extremely high energy cosmic rays  

E-Print Network [OSTI]

Increasing interest towards the observation of the highest energy cosmic rays has motivated the development of new detection techniques. The properties of the Cherenkov photon pulse emitted in the atmosphere by these very rare particles indicate low-cost semiconductor detectors as good candidates for their optical read-out. The aim of this paper is to evaluate the viability of solar panels for this purpose. The experimental framework resulting from measurements performed with suitably-designed solar cells and large conventional photovoltaic areas is presented. A discussion on the obtained and achievable sensitivities follows.

S. Cecchini; I. D'Antone; L. Degli Esposti; G. Giacomelli; M. Guerra; I. Lax; G. Mandrioli; A. Parretta; A. Sarno; R. Schioppo; M. Sorel; M. Spurio

2000-02-07T23:59:59.000Z

279

Discussion of EIA-411 Data Files  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteam Coal Import96 4.87CBECS Public Use Data0 0 0 00/03)%YearD eDiscussion

280

Essays on Macroeconomics and Oil  

E-Print Network [OSTI]

reserves. In the data, crude oil reserve addi- tions consistForce and Proven Reserves in the Venezuelan Oil Industry .such as crude oil production, proved reserves, new reserves,

CAKIR, NIDA

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Oil and Gas Production (Missouri)  

Broader source: Energy.gov [DOE]

A State Oil and Gas Council regulates and oversees oil and gas production in Missouri, and conducts a biennial review of relevant rules and regulations. The waste of oil and gas is prohibited. This...

282

Accelerating Cleanup: Focus on 2006. Discussion draft  

SciTech Connect (OSTI)

This executive summary addresses the activities associated with the National Transuranic (TRU) Program managed by the Carlsbad Area Office (CAO). The CAO programmatically reports to the Assistant Secretary for Environmental Management and receives administrative support through the Albuquerque Operations Office. The mission of the Carlsbad Area Office (CAO) is to protect human health and the environment by opening and operating the Waste Isolation Pilot Plant for site disposal of TRU waste and by establishing an effective system for management of TRU waste from generation to disposal. It includes personnel assigned to the CAO, the Waste Isolation Pilot Plant (WIPP) site operations, and other activities associated with the National TRU Program. The CAO develops and directs implementation of the program, while the DOE Headquarters establishes policy and guidelines. The CAO assesses compliance with the program guidance, as well as the commonality of activities and assumptions among all the sites. Since the development of the February 28, 1997, database used to develop this Discussion Draft, the opening of the WIPP facility for receipt of Contact Handled waste has been delayed from November 1997 to May 1998. This slippage is significant enough to require a change in the milestones and volumes included in the documents to be reviewed by our stakeholders. Changes have been incorporated into this Discussion Draft and its supporting Project Baseline Summaries (PBSs).

None

1997-06-01T23:59:59.000Z

283

Oil shale technology  

SciTech Connect (OSTI)

Oil shale is undoubtedly an excellent energy source that has great abundance and world-wide distribution. Oil shale industries have seen ups and downs over more than 100 years, depending on the availability and price of conventional petroleum crudes. Market forces as well as environmental factors will greatly affect the interest in development of oil shale. Besides competing with conventional crude oil and natural gas, shale oil will have to compete favorably with coal-derived fuels for similar markets. Crude shale oil is obtained from oil shale by a relatively simple process called retorting. However, the process economics are greatly affected by the thermal efficiencies, the richness of shale, the mass transfer effectiveness, the conversion efficiency, the design of retort, the environmental post-treatment, etc. A great many process ideas and patents related to the oil shale pyrolysis have been developed; however, relatively few field and engineering data have been published. Due to the vast heterogeneity of oil shale and to the complexities of physicochemical process mechanisms, scientific or technological generalization of oil shale retorting is difficult to achieve. Dwindling supplied of worldwide petroleum reserves, as well as the unprecedented appetite of mankind for clean liquid fuel, has made the public concern for future energy market grow rapidly. the clean coal technology and the alternate fuel technology are currently of great significance not only to policy makers, but also to process and chemical researchers. In this book, efforts have been made to make a comprehensive text for the science and technology of oil shale utilization. Therefore, subjects dealing with the terminological definitions, geology and petrology, chemistry, characterization, process engineering, mathematical modeling, chemical reaction engineering, experimental methods, and statistical experimental design, etc. are covered in detail.

Lee, S. (Akron Univ., OH (United States). Dept. of Chemical Engineering)

1991-01-01T23:59:59.000Z

284

Phase-change materials to improve solar panel's performance Pascal Biwole1,2,*  

E-Print Network [OSTI]

-change materials to improve solar panel's performance Pascal Biwole1,2,* , Pierre Eclache3 , Frederic Kuznik3 1-mail:phbiwole@unice.fr Abstract: High operating temperatures induce a loss of efficiency in solar photovoltaic and thermal panels set-up. Results show that adding a PCM on the back of a solar panel can maintain the panel

285

Optimization on Solar Panels: Finding the Optimal Output Brian Y. Lu  

E-Print Network [OSTI]

Optimization on Solar Panels: Finding the Optimal Output Brian Y. Lu January 1, 2013 1 Introduction of solar panel: Routing the configuration between solar cells with a switch matrix. However, their result models and control policies for the optimal output of solar panels. The smallest unit on a solar panel

Lavaei, Javad

286

Project focus: Complete design of an interactive solar panel system to be situated on  

E-Print Network [OSTI]

Project focus: · Complete design of an interactive solar panel system to be situated on top the effective area · Two types of solar cells: · 3 panel configurations: · Real-time power output data Si panels with 30.0o tilt c) 10 CdTe panels; 38.5o tilt · Solar insolation recorder, thermometer

287

BACKGROUND REPORTS FOR THE CALIFORNIA CARBON CAPTURE AND STORAGE REVIEW PANEL  

E-Print Network [OSTI]

BACKGROUND REPORTS FOR THE CALIFORNIA CARBON CAPTURE AND STORAGE REVIEW PANEL Prepared by the Technical Advisory Team in support of The California Carbon Capture and Storage Review Panel 12 Carbon Capture and Storage Review Panel Contents 1. Overview of the Carbon Capture and Storage Panel

288

Shallow oil production using horizontal wells with enhanced oil recovery techniques  

SciTech Connect (OSTI)

Millions of barrels of oil exist in the Bartlesville formation throughout Oklahoma, Kansas, and Missouri. In an attempt to demonstrate that these shallow heavy oil deposits can be recovered, a field project was undertaken to determine the effectiveness of enhanced oil recovery techniques (EOR) employing horizontal wells. Process screening results suggested that thermal EOR processes were best suited for the recovery of this heavy oil. Screening criteria suggested that in situ combustion was a viable technique for the production of these reserves. Laboratory combustion tube tests confirmed that sufficient amounts of fuel could be deposited. The results of the in situ combustion field pilot were disappointing. A total overall recovery efficiency of only 16.0 percent was achieved. Results suggest that the combustion front might have moved past the horizontal well, however elevated temperatures or crude upgrading were not observed. Factors contributing to the lack of production are also discussed.

Satchwell, R.M.; Johnson, L.A. Jr. [Western Research Institute, Laramie, WY (United States); Trent, R. [Univ. of Alaska, Fairbanks, AK (United States)

1995-02-01T23:59:59.000Z

289

Residual oil conversion in Ashland FCC Units  

SciTech Connect (OSTI)

Ashland Petroleum Company is a production-poor refining and marketing company. A company must have refining flexibility to compete in today's crude and marketing situation. Ashland has adopted a dual approach to achieving the required refining flexibility: development and construction of the RCC process, and development of techniques to practice residual oil conversion in Ashland FCC units. This paper discusses the operating techniques Ashland has used to allow residual oil conversion to be practiced in their present day FCC's and shows some of the yields which have been achieved.

Barger, D.F.; Miller, C.B.

1983-03-01T23:59:59.000Z

290

Chemical analysis of biomass fast pyrolysis oils  

SciTech Connect (OSTI)

This paper reviews the development of the field of chemical analysis of biomass fast pyrolysis oils. The techniques applied to pyrolysis oil analysis are reviewed including proximate and ultimate analysis, water (moisture) analysis, and chemical component analysis by various forms of chromatography, solvent separations, and spectrophotometric analyses, like infrared and ultraviolet. Advanced analytical techniques such as nuclear magnetic resonance and molecular beam -- mass spectrometry are also discussed. This paper reviews and compares the methods and the results of the analyses. The advantages and shortcomings of the various methods applied are identified. Comparisons derived from the IEA Round Robin are incorporated.

Elliott, D.C.

1994-09-01T23:59:59.000Z

291

Atomic Safety and Licensing Board Panel Biennial Report, Fiscal Years 1993--1994. Volume 6  

SciTech Connect (OSTI)

In Fiscal Year 1993, the Atomic Safety and Licensing Board Panel (``the Panel``) handled 30 proceedings. In Fiscal Year 1994, the Panel handled 36 proceedings. The cases addressed issues in the construction, operation, and maintenance of commercial nuclear power reactors and other activities requiring a license form the Nuclear Regulatory Commission. This report sets out the Panel`s caseload during the year and summarizes, highlight, and analyzes how the wide- ranging issues raised in those proceedings were addressed by the Panel`s judges and licensing boards.

NONE

1995-08-01T23:59:59.000Z

292

Marathon Oil Company  

E-Print Network [OSTI]

Marine oil shale from the Shenglihe oil shale section in the Qiangtang basin, northern Tibet, China, was dated by the Re-Os technique using Carius Tube digestion, Os distillation, Re extraction by acetone and ICP-MS measure-ment. An isochron was obtained giving an age of 101±24 Ma with an initial

unknown authors

293

Synthetic aircraft turbine oil  

SciTech Connect (OSTI)

Synthetic lubricating oil composition having improved oxidation stability comprising a major portion of an aliphatic ester base oil having lubricating properties, formed by the reaction of pentaerythritol and an organic monocarboxylic acid and containing a phenylnaphthylamine, a dialkyldiphenylamine, a polyhydroxy anthraquinone, a hydrocarbyl phosphate ester and a dialkyldisulfide.

Yaffe, R.

1982-03-16T23:59:59.000Z

294

Chinaâs Oil Diplomacy with Russia.  

E-Print Network [OSTI]

??In Chinaâs view, it is necessary to get crude oil and oil pipeline. Under Russia and China strategic partnership, China tries to obtain âlong term… (more)

Chao, Jiun-chuan

2011-01-01T23:59:59.000Z

295

OIL SHALE DEVELOPMENT IN CHINA  

E-Print Network [OSTI]

In this paper history, current status and forecast of Chinese oil shale indus-try, as well as the characteristics of some typical Chinese oil shales are given.

J. Qian; J. Wang; S. Li

296

Peak oil: diverging discursive pipelines.  

E-Print Network [OSTI]

??Peak oil is the claimed moment in time when global oil production reaches its maximum rate and henceforth forever declines. It is highly controversial as… (more)

Doctor, Jeff

2012-01-01T23:59:59.000Z

297

Petroleum Oil | Argonne National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Petroleum Oil Petroleum Oil The production of energy feedstock and fuels requires substantial water input. Not only do biofuel feedstocks like corn, switchgrass and agricultural...

298

Balancing oil and environment... responsibly.  

SciTech Connect (OSTI)

Balancing Oil and Environment…Responsibly As the price of oil continues to skyrocket and global oil production nears the brink, pursuing unconventional oil supplies, such as oil shale, oil sands, heavy oils, and oils from biomass and coal has become increasingly attractive. Of particular significance to the American way is that our continent has significant quantities of these resources. Tapping into these new resources, however, requires cutting-edge technologies for identification, production, processing and environmental management. This job needs a super hero or two for a job of this size and proportion…

Weimer, Walter C.; Teske, Lisa

2007-01-25T23:59:59.000Z

299

Essays on Macroeconomics and Oil  

E-Print Network [OSTI]

Oil Production in Venezuela and Mexico . . . . . . . . . .and Productivity in Venezuela and Mexico . . . . . . . . OilEllner, ”Organized Labor in Venezuela 1958-1991: Behavior

CAKIR, NIDA

2013-01-01T23:59:59.000Z

300

Carbon Cycle Discussion After the warm-up quiz, discuss the carbon cycle.  

E-Print Network [OSTI]

Carbon Cycle Discussion After the warm-up quiz, discuss the carbon cycle. Carbon is one is without carbon. Where else is carbon on our Earth? In rocks, living organisms, the atmosphere, oceans Does carbon stay in one place? What processes include moving carbon? Introduce residence time: How long does

Carrington, Emily

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Appendix C: Installation of Simpson Strong-Tie Storm Panel Screws The Storm Panel Screws are currently available in Hawai`i and meet the International  

E-Print Network [OSTI]

are prepared before installation by following the four P's: 1) Precut the panels to the proper dimensions) Pull off the panel. 6) Adjust screw penetrations so that the spacer between the top set of screw

Wang, Yuqing

302

Bonded Bracket Assmebly for Frameless Solar Panels  

SciTech Connect (OSTI)

In February 2011 the US Department of Energy announced their new Sunshot Initiative. The Sunshot goal is to reduce the total cost of solar energy systems by about 75 percent before the end of the decade. The DOE estimated that a total installed cost of $1 per watt for photovoltaic systems would be equivalent to 6���¢/kilowatt hour (kWh) for energy available from the grid. The DOE also estimated that to meet the $1 per watt goal, PV module costs would need to be reduced to $.50 per watt, balance of systems costs would need to be reduced to $.40 per watt, and power electronic costs would need to reach $.10 per watt. To address the BOS balance of systems cost component of the $1 per watt goal, the DOE announced a funding opportunity called (BOS-X) Extreme Balance of System Hardware Cost Reductions. The DOE identified eight areas within the total BOS costs: 1) installation labor, 2) installation materials, 3) installation overhead and profit, 4) tracker, 5) permitting and commissioning, 6) site preparation, 7) land acquisition, 8) sales tax. The BOS-X funding announcement requested applications in four specific topics: Topic 1: Transformational Building Integrated Photovoltaic (BIPV) Modules Topic 2: Roof and Ground Mount Innovations Topic 3: Transformational Photovoltaic System Designs Topic 4: Development of New Wind Load Codes for PV Systems The application submitted by ARaymond Tinnerman reflected the requirements listed in Topic #2, Roof and Ground Mount Innovations. The goal of topic #2 was to develop technologies that would result in the extreme reduction of material and labor costs associated with applications that require physical connections and attachments to roof and ground mount structures. The topics researched in this project included component cost reduction, labor reduction, weight reduction, wiring innovations, and alternative material utilization. The project objectives included: 1) The development of an innovative quick snap bracket assembly that would be bonded to frameless PV modules for commercial rooftop installations. 2) The development of a composite pultruded rail to replace traditional racking materials. 3) In partnership with a roofing company, pilot the certification of a commercial roof to be solar panel compliant, eliminating the need for structural analysis and government oversight resulting in significantly decreased permitting costs. 4) Reduce the sum of all cost impacts in topic #2 from a baseline total of $2.05/watt to $.34/watt.

Murray, Todd

2013-01-30T23:59:59.000Z

303

UNECE TIMBER COMMITTEE Market Discussions, 3-4 October 2006  

E-Print Network [OSTI]

statements · UNECE/FAO Forest Products Annual Market Review, 2005-2006 · Expert presentations · Delegates: Stora Enso Photo: Stora Enso UNECE/FAO Forest Products Annual Market Review, 2005-2006 · Produced summer background · Wood raw materials · Wood energy · Sawn softwood · Sawn hardwood · Tropical timber · Panels

304

Lunar Rover Solar Panel MountTeam Members: Tian Le, Tudor Boiangiu, Jeremy Chan, James Haensel To develop a mechanized mount for a solar panel to  

E-Print Network [OSTI]

Lunar Rover Solar Panel MountTeam Members: Tian Le, Tudor Boiangiu, Jeremy Chan, James Haensel To develop a mechanized mount for a solar panel to be mounted on a lunar rover. Must be: · capable of orienting panel towards sun · reside on mast extending vertically from rover · capable of unfurling solar

305

Selected Abstracts & Bibliography of International Oil Spill Research, through 1998  

E-Print Network [OSTI]

Kuwait, Middle East, oil and gas fields, oil refinery, oil waste, oil well,Equipment Kuwait Oil Co. 1991. Mideast well fire, oil spillKuwait, Persian Gulf, Saudia Arabia, Oil spill, cleanup, oil spills, crude, oil spill incidents, oil spills-pipeline, warfare, oil skimmers, oil wells,

Louisiana Applied Oil Spill Research & Development Program Electronic Bibliography

1998-01-01T23:59:59.000Z

306

Fluidized bed retorting of eastern oil shale  

SciTech Connect (OSTI)

This topical report summarizes the conceptual design of an integrated oil shale processing plant based on fluidized bed retorting of eastern New Albany oil shale. This is the fourth design study conducted by Foster Wheeler; previous design cases employed the following technologies: Fluidized bed rotating/combustion of Colorado Mahogany zone shale. An FCC concept of fluidized bed retorting/combustion of Colorado Mahogany zone shale. Directly heated moving vertical-bed process using Colorado Mahogany zone shale. The conceptual design encompasses a grassroots facility which processes run-of-mine oil shale into a syncrude oil product and dispose of the spent shale solids. The plant has a nominal capacity of 50,000 barrels per day of syncrude product, produced from oil shale feed having a Fischer Assay of 15 gallons per ton. Design of the processing units was based on non-confidential published information and supplemental data from process licensors. Maximum use of process and cost information developed in the previous Foster Wheeler studies was employed. The integrated plant design is described in terms of the individual process units and plant support systems. The estimated total plant investment is detailed by plant section and estimates of the annual operating requirements and costs are provided. In addition, process design assumptions and uncertainties are documented and recommendations for process alternatives, which could improve the overall plant economics, are discussed. 12 refs., 17 figs., 52 tabs.

Gaire, R.J.; Mazzella, G.

1989-03-01T23:59:59.000Z

307

High efficacy plasma display panel with vertically raised bus electrodes  

SciTech Connect (OSTI)

The authors propose a high efficacy alternating current plasma display panel utilizing vertically raised multilayer bus electrodes. The cell structure was designed to provide an opposite discharge mode and low discharge current in a relatively long gap. The test panels having discharge gaps of 330, 350, and 370 {mu}m were fabricated and basic properties of the panel were investigated in terms of current-voltage characteristics, luminance, and luminous efficiency. The cells with proposed structure show higher luminance and lower current simultaneously. The improvement in luminous efficiency is found to be a factor of 2 compared with the conventional coplanar structure having an electrode gap of 60 {mu}m. Emission spectra and spatio-temporal distribution of infrared light in discharge were measured. It is shown that high luminous efficiency of proposed cell originates from high excitation efficiency, low surface loss of charged particles, and enlarged discharge volume.

Ok, Jung-Woo; Lee, Hae June; Kim, Dong-Hyun; Park, Chung-Hoo; Lee, Ho-Jun; Kim, Jae-Sung; Choi, Kwang-Yeol [Department of Electrical Engineering, Pusan National University, Geumjeong-gu, Busan 609-735 (Korea, Republic of); PDP R and D Department, PDP Division, LG Electronics Inc., Gumi 730-030 (Korea, Republic of); Digital Display Research Laboratory, LG Electronics Inc., Seoul 137-724 (Korea, Republic of)

2006-10-30T23:59:59.000Z

308

Plasma Panel Sensors for Particle and Beam Detection  

E-Print Network [OSTI]

The plasma panel sensor (PPS) is an inherently digital, high gain, novel variant of micropattern gas detectors inspired by many operational and fabrication principles common to plasma display panels (PDPs). The PPS is comprised of a dense array of small, plasma discharge, gas cells within a hermetically-sealed glass panel, and is assembled from non-reactive, intrinsically radiation-hard materials such as glass substrates, metal electrodes and mostly inert gas mixtures. We are developing the technology to fabricate these devices with very low mass and small thickness, using gas gaps of at least a few hundred micrometers. Our tests with these devices demonstrate a spatial resolution of about 1 mm. We intend to make PPS devices with much smaller cells and the potential for much finer position resolutions. Our PPS tests also show response times of several nanoseconds. We report here our results in detecting betas, cosmic-ray muons, and our first proton beam tests.

Peter S. Friedman; Robert Ball; James R. Beene; Yan Benhammou; E. H. Bentefour; J. W. Chapman; Erez Etzion; Claudio Ferretti; Nir Guttman; Daniel S. Levin; Meny Ben-Moshe; Yiftah Silver; Robert L. Varner; Curtis Weaverdyck; Bing Zhou

2012-11-23T23:59:59.000Z

309

Soil stabilization using oil-shale solid waste  

SciTech Connect (OSTI)

Oil-shale solid wastes are evaluated for use as soil stabilizers. A laboratory study consisted of the following tests on compacted samples of soil treated with water and spent oil shale: unconfined compressive strength, moisture-density relationships, wet-dry and freeze-thaw durability, and resilient modulus. Significant increases in strength, durability, and resilient modulus were obtained by treating a silty sand with combusted western oil shale. Moderate increases in durability and resilient modulus were obtained by treating a highly plastic clay with combusted western oil shale. Solid waste from eastern oil shale appears to be feasible for soil stabilization only if limestone is added during combustion. Testing methods, results, and recommendations for mix design of spent shale-stabilized pavement subgrades are presented and the mechanisms of spent-shale cementation are discussed.

Turner, J.P. (Univ. of Wyoming, Laramie, WY (United States). Dept. of Civil and Archeological Engineering)

1994-04-01T23:59:59.000Z

310

Savings from new oil furnaces: A study conducted as part of Washington State's Oil Help Program  

SciTech Connect (OSTI)

The Washington State Energy Office (WSEO) has been running the Oil Help program for three years. Originally operated as a loan program, Oil Help switched to rebates during the 1987 and 1988. Rebates for oil furnace replacements made up over 70 percent of rebate funds, which totaled about $1.3 million. WSEO Evaluation started research in summer of 1988, with the goal of including 100 new furnace households (with a control group of similar size) in the study. Our intention was to look at long-term oil consumption comparing each household with itself over the two periods. The final study group consists of 43 households and a control group of 87 households. The report begins with a review of related research. A discussion of research methodology, weather normalization procedure, data attrition, and important descriptive details follows. Changes in consumption for the new furnace and control groups are reported and are tested for significance. Finally, we discuss the implications of the results for the cost effectiveness of an oil furnace replacement.

Davis, R.

1989-12-01T23:59:59.000Z

311

Oil shale mining studies and analyses of some potential unconventional uses for oil shale  

SciTech Connect (OSTI)

Engineering studies and literature review performed under this contract have resulted in improved understanding of oil shale mining costs, spent shale disposal costs, and potential unconventional uses for oil shale. Topics discussed include: costs of conventional mining of oil shale; a mining scenario in which a minimal-scale mine, consistent with a niche market industry, was incorporated into a mine design; a discussion on the benefits of mine opening on an accelerated schedule and quantified through discounted cash flow return on investment (DCFROI) modelling; an estimate of the costs of disposal of spent shale underground and on the surface; tabulation of potential increases in resource recovery in conjunction with underground spent shale disposal; the potential uses of oil shale as a sulfur absorbent in electric power generation; the possible use of spent shale as a soil stabilizer for road bases, quantified and evaluated for potential economic impact upon representative oil shale projects; and the feasibility of co-production of electricity and the effect of project-owned and utility-owned power generation facilities were evaluated. 24 refs., 5 figs., 19 tabs.

McCarthy, H.E.; Clayson, R.L.

1989-07-01T23:59:59.000Z

312

Imbibition assisted oil recovery  

E-Print Network [OSTI]

analyzed in detail to investigate oil recovery during spontaneous imbibition with different types of boundary conditions. The results of these studies have been upscaled to the field dimensions. The validity of the new definition of characteristic length...

Pashayev, Orkhan H.

2004-11-15T23:59:59.000Z

313

Oil Market Assessment  

Reports and Publications (EIA)

Based on Energy Information Administration (EIA) contacts and trade press reports, overall U.S. and global oil supplies appear to have been minimally impacted by yesterday's terrorist attacks on the World Trade Center and the Pentagon.

2001-01-01T23:59:59.000Z

314

Production of Shale Oil  

E-Print Network [OSTI]

Intensive pre-project feasibility and engineering studies begun in 1979 have produced an outline plan for development of a major project for production of shale oil from private lands in the Piceance Basin in western Colorado. This outline plan...

Loper, R. D.

1982-01-01T23:59:59.000Z

315

Retired four-star General Ronald Keys will discuss the urgent economic and national security risks associated with the nation's  

E-Print Network [OSTI]

: A National Security Imperative to Reduce U.S. Oil Dependence. CNA is a non-profit research organi- zationRetired four-star General Ronald Keys will discuss the urgent economic and national security risks critical to our national security. The CNA MAB has produced reports on America's energy posture that have

Ginzel, Matthew

316

Oil shale research in China  

SciTech Connect (OSTI)

There have been continued efforts and new emergence in oil shale research in Chine since 1980. In this paper, the studies carried out in universities, academic, research and industrial laboratories in recent years are summarized. The research areas cover the chemical structure of kerogen; thermal behavior of oil shale; drying, pyrolysis and combustion of oil shale; shale oil upgrading; chemical utilization of oil shale; retorting waste water treatment and economic assessment.

Jianqiu, W.; Jialin, Q. (Beijing Graduate School, Petroleum Univ., Beijing (CN))

1989-01-01T23:59:59.000Z

317

Demand growth to continue for oil, resume for gas this year in the U.S.  

SciTech Connect (OSTI)

Demand for petroleum products and natural gas in the US will move up again this year, stimulated by economic growth and falling prices. Economic growth, although slower than it was last year, will nevertheless remain strong. Worldwide petroleum supply will rise, suppressing oil prices. Natural gas prices are also expected to fall in response to the decline in oil prices and competitive pressure from other fuels. The paper discusses the economy, total energy consumption, energy sources, oil supply (including imports, stocks, refining, refining margins and prices), oil demand (motor gasoline, jet fuel, distillate fuel, residual fuel oil, and other petroleum products), natural gas demand, and natural gas supply.

Beck, R.J.

1998-01-26T23:59:59.000Z

318

Biocatalysis in Oil Refining  

SciTech Connect (OSTI)

Biocatalysis in Oil Refining focuses on petroleum refining bioprocesses, establishing a connection between science and technology. The micro organisms and biomolecules examined for biocatalytic purposes for oil refining processes are thoroughly detailed. Terminology used by biologists, chemists and engineers is brought into a common language, aiding the understanding of complex biological-chemical-engineering issues. Problems to be addressed by the future R&D activities and by new technologies are described and summarized in the last chapter.

Borole, Abhijeet P [ORNL; Ramirez-Corredores, M. M. [BP Global Fuels Technology

2007-01-01T23:59:59.000Z

319

Oil shale mining processing, uses, and environmental impacts. (Latest citations from the EI compendex*plus database). Published Search  

SciTech Connect (OSTI)

The bibliography contains citations concerning oil shale mining and retorting, uses, and related environmental aspects. References discuss pyrolyzed, gasified, and combusted oil shales. Product yields and oil quality, socioeconomic impacts, exploration, reclamation of mined lands, and waste disposal are covered. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

NONE

1995-09-01T23:59:59.000Z

320

Report Title: The Economic Impact of Oil and Gas Extraction in New Mexico Type of Report: Technical Report  

E-Print Network [OSTI]

Report Title: The Economic Impact of Oil and Gas Extraction in New Mexico Type of Report: Technical of oil and gas extraction in New Mexico are presented in terms of output, value added, employment presented. Historical oil and gas production, reserves, and price data are also presented and discussed. #12

Johnson, Eric E.

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Assessment of industry needs for oil shale research and development  

SciTech Connect (OSTI)

Thirty-one industry people were contacted to provide input on oil shale in three subject areas. The first area of discussion dealt with industry's view of the shape of the future oil shale industry; the technology, the costs, the participants, the resources used, etc. It assessed the types and scale of the technologies that will form the industry, and how the US resource will be used. The second subject examined oil shale R D needs and priorities and potential new areas of research. The third area of discussion sought industry comments on what they felt should be the role of the DOE (and in a larger sense the US government) in fostering activities that will lead to a future commercial US oil shale shale industry.

Hackworth, J.H.

1987-05-01T23:59:59.000Z

322

Oil/gas collector/separator for underwater oil leaks  

DOE Patents [OSTI]

An oil/gas collector/separator for recovery of oil leaking, for example, from an offshore or underwater oil well. The separator is floated over the point of the leak and tethered in place so as to receive oil/gas floating, or forced under pressure, toward the water surface from either a broken or leaking oil well casing, line, or sunken ship. The separator is provided with a downwardly extending skirt to contain the oil/gas which floats or is forced upward into a dome wherein the gas is separated from the oil/water, with the gas being flared (burned) at the top of the dome, and the oil is separated from water and pumped to a point of use. Since the density of oil is less than that of water it can be easily separated from any water entering the dome.

Henning, Carl D. (Livermore, CA)

1993-01-01T23:59:59.000Z

323

LIVE: Meeting on Strengthening Deepwater Blowout Containment...  

Broader source: Energy.gov (indexed) [DOE]

leaders to discuss how to strengthen capabilities for responding to potential blowouts of oil and gas wells on the Outer Continental Shelf. The panel discussion will help guide...

324

Optimising the Use of Spent Oil Shale.  

E-Print Network [OSTI]

??Worldwide deposits of oil shales are thought to represent ~3 trillion barrels of oil. Jordanian oil shale deposits are extensive and high quality, and could… (more)

FOSTER, HELEN,JANE

2014-01-01T23:59:59.000Z

325

Oil Prices and Long-Run Risk.  

E-Print Network [OSTI]

??I show that relative levels of aggregate consumption and personal oil consumption provide anexcellent proxy for oil prices, and that high oil prices predict low… (more)

READY, ROBERT

2011-01-01T23:59:59.000Z

326

Seismic stimulation for enhanced oil recovery  

E-Print Network [OSTI]

aims to enhance oil production by sending seismic wavesbe expected to enhance oil production. INTRODUCTION The hopethe reservoir can cause oil production to increase. Quite

Pride, S.R.

2008-01-01T23:59:59.000Z

327

Seismic stimulation for enhanced oil recovery  

E-Print Network [OSTI]

that in a declining oil reservoir, seismic waves sent acrosswells. Because oil reservoirs are often at kilometers orproximity to the oil reservoir. Our analysis suggests there

Pride, S.R.

2008-01-01T23:59:59.000Z

328

Eighth Workshop on Crystalline Silicon Solar Cell Materials and Processes; Summary Discussion Sessions  

SciTech Connect (OSTI)

This report is a summary of the panel discussions included with the Eighth Workshop on Crystalline Silicon Solar Cell Materials and Processes. The theme of the workshop was ''Supporting the Transition to World Class Manufacturing.'' This workshop provided a forum for an informal exchange of information between researchers in the photovoltaic and nonphotovoltaic fields on various aspects of impurities and defects in silicon, their dynamics during device processing, and their application in defect engineering. This interaction helped establish a knowledge base that can be used for improving device-fabrication processes to enhance solar-cell performance and reduce cell costs. It also provided an excellent opportunity for researchers from industry and universities to recognize mutual needs for future joint research.

Sopori, B.; Swanson, D.; Sinton, R.; Stavola, M.; Tan, T.

1998-12-08T23:59:59.000Z

329

Ninth workshop on crystalline silicon solar cell materials and processes: Summary discussion sessions  

SciTech Connect (OSTI)

This report is a summary of the panel discussions included with the Ninth Workshop on Crystalline Silicon Solar Cell Materials and Processes. The theme for the workshop was ``R and D Challenges and Opportunities in Si Photovoltaics.'' This theme was chosen because it appropriately reflects a host of challenges that the growing production of Si photovoltaics will be facing in the new millennium. The anticipated challenges will arise in developing strategies for cost reduction, increased production, higher throughput per manufacturing line, new sources of low-cost Si, and the introduction of new manufacturing processes for cell production. At the same time, technologies based on CdTe and CIS will come on line posing new competition. With these challenges come new opportunities for Si PV to wean itself from the microelectronics industry, to embark on a more aggressive program in thin-film Si solar cells, and to try new approaches to process monitoring.

Sopori, B.; Tan, T.; Swanson, D.; Rosenblum, M.; Sinton, R.

1999-11-23T23:59:59.000Z

330

Behavior of Concrete Panels Reinforced with Synthetic Fibers, Mild Steel, and GFRP Composites Subjected to Blasts  

SciTech Connect (OSTI)

The paper presents experimental data generated for calibrating finite element models to predict the performance of reinforced concrete panels with a wide range of construction details under blast loading. The specimens were 1.2 m square panels constructed using Normal Weight Concrete (NWC) or Fiber Reinforced Concrete (FRC). FRC consisted of macro-synthetic fibers dispersed in NWC. Five types of panels were tested: NWC panels with steel bars; FRC panels without additional reinforcement; FRC panels with steel bars; NWC panels with glass fiber reinforced polymer (GFRP) bars; and NWC panels reinforced with steel bars and external GFRP laminates on both faces. Each panel type was constructed with three thicknesses: 152 mm, 254 mm, and 356 mm. FRC panels with steel bars had the best performance for new construction. NWC panels reinforced with steel bars and external GFRP laminates on both faces had the best performance for strengthening or rehabilitation of existing structures. The performance of NWC panels with GFRP bars was strongly influenced by the bar spacing. The behavior of the panels is classified in terms of damage using immediate occupancy, life safety, and near collapse performance levels. Preliminary dynamic simulations are compared to the experimental results.

C. P. Pantelides; T. T. Garfield; W. D. Richins; T. K. Larson; J. E. Blakeley

2012-03-01T23:59:59.000Z

331

FESAC FUSION SIMULATION PROJECT (FSP) PANEL REPORT William Tang1  

E-Print Network [OSTI]

power plant (DEMO), further science and technology is needed to achieve the 2500 MW of continuous power1 FESAC FUSION SIMULATION PROJECT (FSP) PANEL REPORT William Tang1 , Riccardo Betti2 , Jeffrey) to FESAC, Dr. Raymond Orbach clearly identifies the overarching objective of the proposed Fusion Simulation

332

Modular container assembled from fiber reinforced thermoplastic sandwich panels  

DOE Patents [OSTI]

An improved, load bearing, modular design container structure assembled from thermoformed FRTP sandwich panels in which is utilized the unique core-skin edge configuration of the present invention in consideration of improved load bearing performance, improved useful load volume, reduced manufacturing costs, structural weight savings, impact and damage tolerance and repair and replace issues.

Donnelly, Mathew William (Edgewood, NM); Kasoff, William Andrew (Albuquerque, NM); Mcculloch, Patrick Carl (Irvine, CA); Williams, Frederick Truman (Albuquerque, NM)

2007-12-25T23:59:59.000Z

333

Solar panels are cost intensive, have limitations with respect to  

E-Print Network [OSTI]

advantage of being able to convert sunlight into clean energy. After the glass is coated, we install clean electricity. Advantages · Building-integratable. · Contributes to EU targets towards energySolar panels are cost intensive, have limitations with respect to where they can be integrated

Langendoen, Koen

334

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

Scientific Review Panel (ISRP) conduct a review of the Spring Chinook Hatchery Program of the Lower Snake River Compensation Plan (LSRCP). The LSRCP was authorized by Congress in 1976 to conduct fish hatchery operations to produce a return of 58,700 adult spring/summer Chinook salmon above Lower Granite Dam after

335

1999IEEE Power Society Summer Meeting Panel Session  

E-Print Network [OSTI]

61801 Background The electricity industry is in the middle of its greatest upheaval since Edison began. At the same time, the pace of developmentin technology has never been more rapid. The harnessing of new and the potential benefits attainable from new advances in technology. 624 #12;The panel addresses the compendium

Gross, George

336

PRESENTATION TO NRC BURNING PLASMA PANEL DR. STEPHEN O. DEAN  

E-Print Network [OSTI]

JANUARY 17, 2003 In response to request by panel co-chair John Ahearne as follows: "We have heard from" #12;2 BOTTOM LINES FUSION IS NOT ON THE RADAR SCREEN OF THE U. S. ELECTRIC UTILITIES ! To get DEVELOPMENT WOULD ALSO ATTRACT INTEREST FROM INDUSTRY GENERAL ATOMICS, FOR HISTORICAL REASONS, IS UNIQUE

337

An overview of the gate and panel industry  

E-Print Network [OSTI]

acquiring raw materials, its pre-fabrication, welding, touch-up, and delivery of the product. My first major responsibility for Texas Gate and Panel was to expand its sales territory. It soon became obvious that a thorough knowledge of my competitors...

Fisher, C. West

2000-01-01T23:59:59.000Z

338

Report of the Technical' Panel on Magnetic Fusion  

E-Print Network [OSTI]

;Grumman CorporationBethpage, New York 11714-3580 Joseph G. Gavin, Jr Senior Management Consultant DecemberDOE/S-O035 Report of the Technical' Panel on Magnetic Fusion of the Energy Research Advisory Board November 1986 A Report of the Energy Research Advisory Board to the United States Department of Energy

339

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6th of British Columbia, Vancouver, B.C., Canada. Scientific Peer Review Group Members Jack Griffith, Ph. D., Consulting Fisheries Scientist, formerly Professor at Idaho State University. William Liss, Ph.D., Professor

340

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

1 Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6 th conditions. Conditions one and two pertained to the relationship of JCAPE to the Idaho Supplementation Study. These conditions were addressed as part of the ISRP's Idaho Supplementation Study review (ISRP 2003

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

1 Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6th Loudenslager, ISRP Chair Subject: Response Request for Idaho Department of Fish and Game's Accord proposal, Idaho Nutrient Enhancement Project (2008-607-00) Background At the Council's July 9, 2010 request

342

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

1 Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6 th specific conditions. Conditions one and two pertained to the relationship of JCAPE to the Idaho recommendation regarding the Idaho Supplementation Study in 2003; consequently, the Council did not request

343

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

. Scientific Peer Review Group Members Jim Congleton, Ph.D., Emeritus Fisheries Professor, University of IdahoIndependent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6th of Fish and Wildlife Resources, University of Idaho, an expert in large river fisheries population

344

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6 th the Idaho Department of Fish and Game's Master Plan for the Snake River Sockeye Program (#2007's responses to the Step 1 scientific review elements specified by the Council. Although this is a Step 1

345

Independent Scientific Review Panel for the Northwest Power Planning Council  

E-Print Network [OSTI]

Independent Scientific Review Panel for the Northwest Power Planning Council 851 SW 6th Avenue, Suite 1100 Portland, Oregon 97204 isrp@nwppc.org Review of Idaho Supplementation Studies (IDFG 2003-8 May 22, 2003 #12;ISRP 2003-8 ISS Review i ISRP Review of Idaho Supplementation Studies Contents

346

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

1 Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6th, 2009 To: W. Bill Booth, Council Chair From: Eric Loudenslager, ISRP Chair Subject: Review of Idaho Department of Fish and Game's Revised Southern Idaho Wildlife Mitigation projects (1995-057-00 and -01

347

Independent Scientific Review Panel for the Northwest Power Planning Council  

E-Print Network [OSTI]

Independent Scientific Review Panel for the Northwest Power Planning Council Preliminary Review to ISRP comments requested Report Page # 24001 Lake Pend Oreille Predation Research Idaho Fish and Game No and conserve high priority bull and westslope cutthroat trout habitat in Trestle Creek. Idaho Department

348

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6th, University of Idaho, an expert in large river fisheries population dynamics, and salmon, trout and char Section, University of British Columbia, Vancouver, B.C., Canada. Scientific Peer Review Group Members Jim

349

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6th' Southern Idaho Wildlife Mitigation Project 199505702 Background At the Council's April 24, 2007 request, the ISRP reviewed a revised proposal for the Shoshone- Bannock Tribes' Southern Idaho Wildlife Mitigation

350

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

scientific criteria? Page 198909800 Idaho Supplementation Studies IDFG / NPT / SBT Mountain Snake Salmon $1Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6th Ecosystem Science Section, University of British Columbia, Vancouver, B.C., Canada. Scientific Peer Review

351

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

1 Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6th Chair Subject: Final Review of Idaho Department of Fish and Game's Accord proposal, Idaho Nutrient Idaho Department of Fish and Game's (IDFG) response to a preliminary ISRP review of the Accord proposal

352

Panel Damping Loss Factor Estimation Using The Random Decrement Technique  

E-Print Network [OSTI]

The use of the Random Decrement Technique (RDT) for estimating panel damping loss factors ranging from 1% to 10% is examined in a systematic way, with a focus on establishing the various parameters one must specify to use the technique to the best...

Dande, Himanshu Amol

2010-12-10T23:59:59.000Z

353

Astronomy Advisory Panel Richard Bower, Michael Brown, Anthony  

E-Print Network [OSTI]

Astronomy Advisory Panel Richard Bower, Michael Brown, Anthony Challinor, Chris Evans, Paul O to provide large contracts for UK industry. · High Performance Computing access ­ fund hardware upgrades via over 10 years Many UK science areas: dark energy/matter, galactic structure, transients, solar system

Crowther, Paul

354

THE EGYPT LABOR MARKET PANEL SURVEY: INTRODUCING THE 2012 ROUND  

E-Print Network [OSTI]

#12;THE EGYPT LABOR MARKET PANEL SURVEY: INTRODUCING THE 2012 ROUND Ragui Assaad and Caroline Egypt www.erf.org.eg Copyright © The Economic Research Forum, 2013 All rights reserved. No part our data to other statistical sources for Egypt to evaluate the representativeness of the sample

Levinson, David M.

355

UNL Faculty Provide Updates to the Water Resources Advisory Panel  

E-Print Network [OSTI]

UNL Faculty Provide Updates to the Water Resources Advisory Panel By Rachael Herpel, Outreach and Education Specialist, UNL Water Center and NU Rural Initiative The University of Nebraska- Lincoln's Water of guidance for UNL's water research, education and outreach programming. When WRAP first met in 2006

Nebraska-Lincoln, University of

356

Panel on the Future of BPM Research/Publications  

E-Print Network [OSTI]

PAGE 0 Panel on the Future of BPM Research/Publications August 29th 2013, 13.00-13.30 Wil van der Aalst (moderator), Florian Daniel, Jianmin Wang, Barbara Weber (BPM PC chairs 2013), Shazia Sadiq, Pnina Soffer, Hagen Völzer (BPM PC chairs 2014) #12;Motivation · For the first time, BPM authors were asked

van der Aalst, Wil

357

Developing a SNP panel for forensic identification of individuals  

E-Print Network [OSTI]

Developing a SNP panel for forensic identification of individuals Kenneth K. Kidd a,*, Andrew J) are likely in the near future to have a fundamental role in forensics in both human identification www.elsevier.com/locate/forsciint Forensic Science International 164 (2006) 20­32 * Corresponding

Kidd, Kenneth

358

Transporting US oil imports: The impact of oil spill legislation on the tanker market. Draft final report  

SciTech Connect (OSTI)

The Oil Pollution Act of 1990 (``OPA``) and an even more problematic array of State pollution laws have raised the cost, and risk, of carrying oil into and out of the US. This report, prepared under contract to the US Department of energy`s Office of Domestic and International Policy, examines the impact of Federal and State oil spill legislation on the tanker market. It reviews the role of marine transportation in US oil supply, explores the OPA and State oil spill laws, studies reactions to OPA in the tanker and tank barge industries and in related industries such as insurance and ship finance, and finally, discusses the likely developments in the years ahead. US waterborne oil imports amounted to 6.5 million B/D in 1991, three-quarters of which was crude oil. Imports will rise by almost 3 million B/D by 2000 according to US Department of energy forecasts, with most of the crude oil growth after 1995. Tanker demand will grow even faster: most of the US imports and the increased traffic to other world consuming regions will be on long-haul trades. Both the number of US port calls by tankers and the volume of offshore lightering will grow. Every aspect of the tanker industry`s behavior is affected by OPA and a variety of State pollution laws.

Rowland, P.J. [Rowland (P.) Associates (United States)

1992-05-01T23:59:59.000Z

359

Report on Hydrogen Storage Panel Findings in DOE-BES Sponsored...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Hydrogen Storage Panel Findings in DOE-BES Sponsored Workshop on Basic Research for Hydrogen Production, Storage and Use Report on Hydrogen Storage Panel Findings in DOE-BES...

360

Final Report of theIgneous Consequences Peer Review Panel | Department...  

Broader source: Energy.gov (indexed) [DOE]

Final Report of theIgneous Consequences Peer Review Panel A report for the DOE on the Yucca Mountain Project. Final Report of the Igneous Consequences Peer Review Panel...

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

E-Print Network 3.0 - ad hoc panel Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

panel Search Powered by Explorit Topic List Advanced Search Sample search results for: ad hoc panel Page: << < 1 2 3 4 5 > >> 1 Part 500, Chapter 25 SCIENTIFIC MISCONDUCT REVIEW...

362

STFC Astronomy Advisory Panel Draft 2012 Programmatic Review report to PPAN (October 2012)  

E-Print Network [OSTI]

#12;STFC Astronomy Advisory Panel Draft 2012 Programmatic Review report to PPAN (October 2012) Astronomy Advisory Panel: Richard Bower (Durham University), Michael Brown (University of Manchester), Anthony Challinor (University of Cambridge), Chris Evans (STFC United Kingdom Astronomy Technology Centre

Crowther, Paul

363

Design and analysis of a concrete modular housing system constructed with 3D panels  

E-Print Network [OSTI]

An innovative modular house system design utilizing an alternative concrete residential building system called 3D panels is presented along with an overview of 3D panels as well as relevant methods and markets. The proposed ...

Sarcia, Sam Rhea, 1982-

2004-01-01T23:59:59.000Z

364

Panel assemblage for housing : some form and construction explorations for small buildings  

E-Print Network [OSTI]

This thesis examines the consequences of building homes in a factory and explores viable construction alternatives using factory-made panels. The exploration considers panelized systems of dwelling construction and its ...

Borenstein, David Reed

1984-01-01T23:59:59.000Z

365

Non-Edible Plant Oils as New Sources for Biodiesel Production  

E-Print Network [OSTI]

Abstract: Due to the concern on the availability of recoverable fossil fuel reserves and the environmental problems caused by the use those fossil fuels, considerable attention has been given to biodiesel production as an alternative to petrodiesel. However, as the biodiesel is produced from vegetable oils and animal fats, there are concerns that biodiesel feedstock may compete with food supply in the long-term. Hence, the recent focus is to find oil bearing plants that produce non-edible oils as the feedstock for biodiesel production. In this paper, two plant species, soapnut (Sapindus mukorossi) and jatropha (jatropha curcas, L.) are discussed as newer sources of oil for biodiesel production. Experimental analysis showed that both oils have great potential to be used as feedstock for biodiesel production. Fatty acid methyl ester (FAME) from cold pressed soapnut seed oil was envisaged as biodiesel source for the first time. Soapnut oil was found to have average of 9.1 % free FA, 84.43 % triglycerides, 4.88 % sterol and 1.59 % others. Jatropha oil contains approximately 14 % free FA, approximately 5 % higher than soapnut oil. Soapnut oil biodiesel contains approximately 85 % unsaturated FA while jatropha oil biodiesel was found to have approximately 80 % unsaturated FA. Oleic acid was found to be the dominant FA in both soapnut and jatropha biodiesel. Over 97 % conversion to FAME was achieved for both soapnut and jatropha oil.

Arjun B. Chhetri; Martin S. Tango; Suzanne M. Budge; K. Chris Watts

366

JANUARY 2007 THE BP U.S. REFINERIES INDEPENDENT SAFETY REVIEW PANEL  

E-Print Network [OSTI]

OF JANUARY 2007 THE REPORT THE BP U.S. REFINERIES INDEPENDENT SAFETY REVIEW PANEL #12;From left;PANEL STATEMENT The B.P. U.S. Refineries Independent Safety Review Panel i Process safety accidents can be prevented. On March 23, 2005, the BP Texas City refinery experienced a catastrophic process accident

Leveson, Nancy

367

11-level Cascaded H-bridge Grid-tied Inverter Interface with Solar Panels  

E-Print Network [OSTI]

11-level Cascaded H-bridge Grid-tied Inverter Interface with Solar Panels Faete Filho, Yue Cao multilevel DC-AC grid-tied inverter. Each inverter bridge is connected to a 200 W solar panel. OPAL-RT lab match. A novel SPWM scheme is proposed in this paper to be used with the solar panels that can account

Tolbert, Leon M.

368

Used Oil and Filter Disposal Used Oil: Create a segregated storage area or container. Label the container "Waste Oil Only".  

E-Print Network [OSTI]

Used Oil and Filter Disposal Used Oil: Create a segregated storage area or container. Label the container "Waste Oil Only". Maintain a written log to document all amounts and types of oil added to the container. No solvents, oil contaminated with solvents, PCBs, non-petroleum based oils, or any other

Maroncelli, Mark

369

First joint SPE/DOE symposium on enhanced oil recovery, proceedings supplement  

SciTech Connect (OSTI)

The First Joint Symposium on Enhanced Oil Recovery sponsored by the Society of Petroleum Engineers and the US Department of Energy was held in Tulsa, Oklahoma. Besides the thirty-three technical papers which covered all phases of enhanced oil recovery and were published in the Proceedings, the Symposium included a session on Enhanced Oil Recovery Incentives where ten papers were presented which discussed the status of enhanced oil recovery technology, and included papers on incentive programs of the United States, Canada and Venezuela. These papers are published in this Proceedings Supplement under the following titles: Federal Government Role in enhanced Oil Recovery; Financial Realities of an Adequate Petroleum Supply; Major Technology Constraints in Enhanced Oil Recovery; Decontrol-Opportunities and Dangers; Status of EOR Technology; Impact of Federal Incentives on US Production; Canadian Incentives Program; and Heavy Oil Incentives in Venezuela.

None

1980-01-01T23:59:59.000Z

370

An investigation of a residential solar system coupled to a radiant panel ceiling  

SciTech Connect (OSTI)

An experimental study of a solar-radiant heating system was performed at Iowa State University's Energy Research House (ERH). The ERH was constructed with copper tubes embedded in the plaster ceilings, thus providing a unique radiant heating system. In addition, 24 water-glycol, flat-plate solar collectors were mounted on the south side of the residence. The present study uses the solar collectors to heat a storage tank via a submerged copper tube oil. Hot water from the storage tank is then circulated through a heat exchanger, which heats the water flowing through the radiant ceiling. This paper contains a description of the solar-radiant system and an interpretation of the data that were measured during a series of transient experiments. In addition, the performance of the flat-plate solar collectors and the water storage tank were evaluated. The characteristics of a solar-to-radiant heat exchanger were also investigated. The thermal behavior of the radiant ceiling and the room enclosures were observed, and the heat transfer from the ceiling by radiation and convection was estimated. The overall heating system was also evaluated using the thermal performances of the individual components. The results of this study verify that it is feasible to use a solar system coupled to a low-temperature radiant-panel heating system for space heating. A sample performance evaluation is also presented.

Zhang, Z.; Pate, M.; Nelson, R.

1988-08-01T23:59:59.000Z

371

MAJOR OIL PLAYS IN UTAH AND VICINITY  

SciTech Connect (OSTI)

Utah oil fields have produced over 1.2 billion barrels (191 million m{sup 3}). However, the 13.7 million barrels (2.2 million m{sup 3}) of production in 2002 was the lowest level in over 40 years and continued the steady decline that began in the mid-1980s. The Utah Geological Survey believes this trend can be reversed by providing play portfolios for the major oil producing provinces (Paradox Basin, Uinta Basin, and thrust belt) in Utah and adjacent areas in Colorado and Wyoming. Oil plays are geographic areas with petroleum potential caused by favorable combinations of source rock, migration paths, reservoir rock characteristics, and other factors. The play portfolios will include: descriptions and maps of the major oil plays by reservoir; production and reservoir data; case-study field evaluations; summaries of the state-of-the-art drilling, completion, and secondary/tertiary techniques for each play; locations of major oil pipelines; descriptions of reservoir outcrop analogs; and identification and discussion of land use constraints. All play maps, reports, databases, and so forth, produced for the project will be published in interactive, menu-driven digital (web-based and compact disc) and hard-copy formats. This report covers research activities for the third quarter of the first project year (January 1 through March 31, 2003). This work included gathering field data and analyzing best practices in the eastern Uinta Basin, Utah, and the Colorado portion of the Paradox Basin. Best practices used in oil fields of the eastern Uinta Basin consist of conversion of all geophysical well logs into digital form, running small fracture treatments, fingerprinting oil samples from each producing zone, running spinner surveys biannually, mapping each producing zone, and drilling on 80-acre (32 ha) spacing. These practices ensure that induced fractures do not extend vertically out of the intended zone, determine the percentage each zone contributes to the overall production of the well, identify areas that may be by-passed by a waterflood, and prevent rapid water breakthrough. In the eastern Paradox Basin, Colorado, optimal drilling, development, and production practices consist of increasing the mud weight during drilling operations before penetrating the overpressured Desert Creek zone; centralizing treatment facilities; and mixing produced water from pumping oil wells with non-reservoir water and injecting the mixture into the reservoir downdip to reduce salt precipitation, dispose of produced water, and maintain reservoir pressure to create a low-cost waterflood. During this quarter, technology transfer activities consisted of technical presentations to members of the Technical Advisory Board in Colorado and the Colorado Geological Survey. The project home page was updated on the Utah Geological Survey Internet web site.

Thomas C. Chidsey Jr; Craig D. Morgan; Roger L. Bon

2003-07-01T23:59:59.000Z

372

Future oil and gas: Can Iran deliver?  

SciTech Connect (OSTI)

Iran`s oil and gas production and exports constitute the country`s main source of foreign exchange earnings. The future level of these earnings will depend on oil prices, global demand for Iranian exports, the country`s productive capability and domestic consumption. The size of Iranian oil reserves suggests that, in principle, present productive capacity could be maintained and expanded. However, the greatest share of production in coming years still will come from fields that already have produced for several decades. In spite of significant remaining reserves, these fields are not nearly as prolific as they were in their early years. The operations required for further development are now more complicated and, in particular, more costly. These fields` size also implies that improving production, and instituting secondary and tertiary recovery methods (such as gas injection), will require mega-scale operations. This article discusses future oil and gas export revenues from the Islamic Republic of Iran, emphasizing the country`s future production and commenting on the effects of proposed US sanctions.

Takin, M. [Centre for Global Energy Studies, London (United Kingdom)

1996-11-01T23:59:59.000Z

373

Spot-Oiling Johnsongrass.  

E-Print Network [OSTI]

I TEXAS AGRICULTURAL EXTENSIO-N SERVICE G. G. Gibson, Director, College Station, Texas [Blank Page in Original Bulletin] I the bast I ir used the low I . .. 1 the fol or mort , needed SPOT-OILING JOHNSONGRASS H. E. Rea, M. J. Norris..., and Fred C. Elliott* Texas A. & M. College System ~HNSONGRASS CAN BE killed to the i ground by the application of 1 / 3 teaspoonful of a herbicidal oil to the crown of each stem. Eradication of established Johnsongrass can be obtained in a single...

Elliott, Fred C.; Norris, M. J.; Rea, H. E.

1955-01-01T23:59:59.000Z

374

Oil | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy UsageAUDITVehicles »Exchange VisitorsforDepartment ofNo FearOfficeOil Oil For the

375

Virent is Replacing Crude Oil  

Broader source: Energy.gov [DOE]

Breakout Session 2A—Conversion Technologies II: Bio-Oils, Sugar Intermediates, Precursors, Distributed Models, and Refinery Co-Processing Virent is Replacing Crude Oil Randy Cortright, Founder & Chief Technology Officer, Virent

376

Enhanced Oil Recovery of Viscous Oil by Injection of Water-in-Oil Emulsion Made with Used Engine Oil  

E-Print Network [OSTI]

was proposed for emulsion generation because of several key advantages: more favorable viscosity that results in better emulsion injectivity, soot particles within the oil that readily promote stable emulsions, almost no cost of the oil itself and relatively...

Fu, Xuebing

2012-08-20T23:59:59.000Z

377

Oil and Gas Program (Tennessee)  

Broader source: Energy.gov [DOE]

The Oil and Gas section of the Tennessee Code, found in Title 60, covers all regulations, licenses, permits, and laws related to the production of natural gas. The laws create the Oil and Gas...

378

Oil and Gas Conservation (Montana)  

Broader source: Energy.gov [DOE]

Parts 1 and 2 of this chapter contain a broad range of regulations pertaining to oil and gas conservation, including requirements for the regulation of oil and gas exploration and extraction by the...

379

Novel Bioplastics and biocomposites from Vegetable Oils  

SciTech Connect (OSTI)

Polymeric materials have been prevalent in our everyday lives for quite a long time. Most of today's polymeric materials are derived from nonrenewable petroleum-based feedstocks. Instabilities in the regions where petroleum is drilled, along with an increased demand in petroleum, have driven the price of crude oil to record high prices. This, in effect, increases the price of petroleum-based polymeric materials, which has caused a heightened awareness of renewable alternatives for polymeric feedstocks. Cellulose, starch, proteins and natural oils have all been examined as possible polymeric feedstocks. Natural oils are commercially available on a large scale and are relatively cheap. It is projected that the U.S. alone will produce 21 billion pounds of soybean oil in the period 2008/2009. Natural oils also have the advantages of inherent biodegradability, low toxicity, high purity and ready availability. Most natural oils possess a triglyceride structure as shown in Figure 1. Most natural oils have a unique distribution of fatty acid side chains, along with varying degrees of unsaturation per triglyceride. Common fatty acid side chains in naturally occurring oils are palmitic acid (C16:0), a 16 carbon fatty acid with no unsaturation; stearic acid (C18:0), an 18 carbon fatty acid with no unsaturation; oleic acid (C18:1), an 18 carbon fatty acid with one double bond; linoleic acid (C18:2), an 18 carbon fatty acid with two double bonds; and linolenic acid (C18:3), an 18 carbon fatty acid with three double bonds. Of course, there are other fatty acids with varying degrees of unsaturation, but their abundance is usually minimal. All of the unsaturated fatty acids mentioned have naturally occurring cis double bonds, which is common for most unsaturated fatty acids. In addition, the afore mentioned fatty acids have the first double bond at the position of carbon 9 (C9), followed by carbon 12 (C12), if there are two degrees of unsaturation, then at carbon 15 (C15), if there are three degrees of unsaturation. In addition, the double bonds are not in conjugation. Table 1 gives the fatty acid make-up of linseed oil. It can be seen that linseed oil has an average of 6.0 double bonds per triglyceride. Its fatty acid content consists of 5.4% palmitic acid (C16:0), 3.5% stearic acid (C18:0), 19% oleic acid (C18:1), 24 % linoleic acid (C18:2) and 47% linolenic (C18:3). Table 1 also gives the fatty acid composition and varying degrees of unsaturation for various other naturally-occurring natural vegetable oils. The regions of unsaturation in natural oils allow for interesting polymer chemistry to take place. Some of this interesting polymer science, however, involves chemical modification of the regions of unsaturation. Acrylated epoxidized soybean oil (AESO) is prepared by epoxidation of the double bonds, followed by ring opening with acrylic acid. The resulting oil has both acrylate groups and hydroxyl groups. Wool and colleagues have further reacted the hydroxyl groups within the oil with maleic anhydride to produce maleated acrylated epoxidized soybean oil (MAESO). The MAESO has been copolymerized with styrene free radically to produce promising thermosetting sheet molding resins. Petrovi? and co-workers have directly ring opened the epoxidized oil to produce polyols that produce promising polyurethanes through condensation polymerization with diisocyanates. Our group's work initially focused on direct cationic copolymerization of the double bonds or conjugated double bonds of natural oils with monomers, such as styrene and divinylbenzene, to produce promising thermosetting resins. The only modification of the oils that was carried out in these studies was conjugation of the double bonds to enhance the reactivity of the oil. This work has been expanded recently with the incorporation of glass fiber to produce promising composites. We have also explored thermal polymerization techniques to make novel thermosets. This dissertation is divided into four chapters. The first chapter discusses the synthesis and characterization of biobased

Phillip H. Henna

2008-08-18T23:59:59.000Z

380

Process for the production of refrigerator oil  

SciTech Connect (OSTI)

A process for producing a high quality refrigerator oil from an oil fraction boiling at a temperature within boiling point of lubricating oil by contacting said oil fraction with a solvent to extract undesirable components thereby lowering % C..cap alpha.. of said oil fraction, hydrogenating said solvent extracted fraction under the specific conditions, and then contacting said hydrogenated oil with a solid absorbant to remove impurities; said oil fraction being obtained from a low grade naphthenic crude oil.

Kunihiro, T.; Tsuchiya, K.

1985-06-04T23:59:59.000Z

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Nineteenth oil shale symposium proceedings  

SciTech Connect (OSTI)

This book contains 23 selections. Some of the titles are: Effects of maturation on hydrocarbon recoveries from Canadian oil shale deposits; Dust and pressure generated during commercial oil shale mine blasting: Part II; The petrosix project in Brazil - An update; Pathway of some trace elements during fluidized-bed combustion of Israeli Oil Shale; and Decommissioning of the U.S. Department of Energy Anvil Points Oil Shale Research Facility.

Gary, J.H.

1986-01-01T23:59:59.000Z

382

Analysis Patterns for Oil Refineries  

E-Print Network [OSTI]

We present analysis patterns to describe the structure of oil refineries. The Refinery Produc tion Unit Pattern describes the structure of units and unit groups. The Oil Storage Pattern describes the structure of tanks and tank groups. The Oil Delivery Pattern describes the structure of stations for import and export of oil. The Production Process Pattern describes the productionprocess. The audience for this paper includes analysts, designers, and programmers who are involved in developing Refinery Information Systems.

Lei Zhen; Guangzhen Shao

383

Oil and Gas Air Heaters  

E-Print Network [OSTI]

, the relation of hot-air temperature, oil or gas consumption and fresh airflow is determined based on energy equilibrium....

Kou, G.; Wang, H.; Zhou, J.

2006-01-01T23:59:59.000Z

384

Concentrating Solar Power Ă?¢Ă?Â?Ă?Â? Central Receiver Panel Component Fabrication and Testing FINAL REPORT  

SciTech Connect (OSTI)

The objective of this project is to complete a design of an advanced concentrated solar panel and demonstrate the manufacturability of key components. Then confirm the operation of the key components under prototypic solar flux conditions. This work is an important step in reducing the levelized cost of energy (LCOE) from a central receiver solar power plant. The key technical risk to building larger power towers is building the larger receiver systems. Therefore, this proposed technology project includes the design of an advanced molten salt prototypic sub-scale receiver panel that can be utilized into a large receiver system. Then complete the fabrication and testing of key components of the receive design that will be used to validate the design. This project shall have a significant impact on solar thermal power plant design. Receiver panels of suitable size for utility scale plants are a key element to a solar power tower plant. Many subtle and complex manufacturing processes are involved in producing a reliable, robust receiver panel. Given the substantial size difference between receiver panels manufactured in the past and those needed for large plant designs, the manufacture and demonstration on prototype receiver panel components with representative features of a full-sized panel will be important to improving the build process for commercial success. Given the thermal flux limitations of the test facility, the panel components cannot be rendered full size. Significance changes occurred in the projects technical strategies from project initiation to the accomplishments described herein. The initial strategy was to define cost improvements for the receiver, design and build a scale prototype receiver and test, on sun, with a molten salt heat transport system. DOE had committed to constructing a molten salt heat transport loop to support receiver testing at the top of the NSTTF tower. Because of funding constraints this did not happen. A subsequent plan to test scale prototype receiver, off sun but at temperature, at a molten salt loop at ground level adjacent to the tower also had to be abandoned. Thus, no test facility existed for a molten salt receiver test. As a result, PWR completed the prototype receiver design and then fabricated key components for testing instead of fabricating the complete prototype receiver. A number of innovative design ideas have been developed. Key features of the receiver panel have been identified. This evaluation includes input from Solar 2, personal experience of people working on these programs and meetings with Sandia. Key components of the receiver design and key processes used to fabricate a receiver have been selected for further evaluation. The Test Plan, Concentrated Solar Power Receiver In Cooperation with the Department of Energy and Sandia National Laboratory was written to define the scope of the testing to be completed as well as to provide details related to the hardware, instrumentation, and data acquisition. The document contains a list of test objectives, a test matrix, and an associated test box showing the operating points to be tested. Test Objectives: 1. Demonstrate low-cost manufacturability 2. Demonstrate robustness of two different tube base materials 3. Collect temperature data during on sun operation 4. Demonstrate long term repeated daily operation of heat shields 5. Complete pinhole tube weld repairs 6. Anchor thermal models This report discusses the tests performed, the results, and implications for design improvements and LCOE reduction.

McDowell, Michael W [Pratt & Whitney Rocketdyne; Miner, Kris [Pratt & Whitney Rocketdyne

2013-03-30T23:59:59.000Z

385

The Uranium Processing Facility Finite Element Meshing Discussion  

Office of Environmental Management (EM)

* Discuss the mesh criteria * Discuss the evolution of the mesh of the UPF main building model * Discuss how the mesh affects the analysis process October 25, 2011 2 Department of...

386

OIL ANALYSIS LAB TRIVECTOR ANALYSIS  

E-Print Network [OSTI]

OIL ANALYSIS LAB TRIVECTOR ANALYSIS This test method is a good routine test for the overall condition of the oil, the cleanliness, and can indicate the presence of wear metals that could be coming of magnetic metal particles within the oil. This may represent metals being worn from components (i

387

Oil shale: Technology status report  

SciTech Connect (OSTI)

This report documents the status of the US Department of Energy's (DOE) Oil Shale Program as of the end of FY 86. The report consists of (1) a status of oil shale development, (2) a description of the DOE Oil Shale Program, (3) an FY 86 oil shale research summary, and (4) a summary of FY 86 accomplishments. Discoveries were made in FY 86 about the physical and chemical properties and behavior of oil shales, process chemistry and kinetics, in situ retorting, advanced processes, and the environmental behavior and fate of wastes. The DOE Oil Shale Program shows an increasing emphasis on eastern US oil shales and in the development of advanced oil shale processing concepts. With the award to Foster Wheeler for the design of oil shale conceptual plants, the first step in the development of a systems analysis capability for the complete oil shale process has been taken. Unocal's Parachute Creek project, the only commercial oil shale plant operating in the United States, is operating at about 4000 bbl/day. The shale oil is upgraded at Parachute Creek for input to a conventional refinery. 67 refs., 21 figs., 3 tabs.

Not Available

1986-10-01T23:59:59.000Z

388

Belowground Carbon Cycling Processes at the Molecular Scale: An EMSL Science Theme Advisory Panel Workshop  

SciTech Connect (OSTI)

As part of the Belowground Carbon Cycling Processes at the Molecular Scale workshop, an EMSL Science Theme Advisory Panel meeting held in February 2013, attendees discussed critical biogeochemical processes that regulate carbon cycling in soil. The meeting attendees determined that as a national scientific user facility, EMSL can provide the tools and expertise needed to elucidate the molecular foundation that underlies mechanistic descriptions of biogeochemical processes that control carbon allocation and fluxes at the terrestrial/atmospheric interface in landscape and regional climate models. Consequently, the workshop's goal was to identify the science gaps that hinder either development of mechanistic description of critical processes or their accurate representation in climate models. In part, this report offers recommendations for future EMSL activities in this research area. The workshop was co-chaired by Dr. Nancy Hess (EMSL) and Dr. Gordon Brown (Stanford University).

Hess, Nancy J.; Brown, Gordon E.; Plata, Charity

2014-02-21T23:59:59.000Z

389

Secretary Bodman and Rosatom Director Kiriyenko Meet to Discuss...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Rosatom Director Kiriyenko Meet to Discuss U.S.-Russia Nuclear Security Progress Secretary Bodman and Rosatom Director Kiriyenko Meet to Discuss U.S.-Russia Nuclear Security...

390

Secretary Chu to Discuss Importance of Electric Grid Modernization...  

Energy Savers [EERE]

Discuss Importance of Electric Grid Modernization to U.S. Competitiveness at Gridwise Global Forum Secretary Chu to Discuss Importance of Electric Grid Modernization to U.S....

391

Secretary Moniz to Discuss Western Energy Landscape at Western...  

Energy Savers [EERE]

Discuss Western Energy Landscape at Western Governors' Association Annual Meeting Secretary Moniz to Discuss Western Energy Landscape at Western Governors' Association Annual...

392

Break-out Discussion i: Modeling Consumer Behavior Residential...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Break-out Discussion i: Modeling Consumer Behavior Residential Scale Break-out Discussion i: Modeling Consumer Behavior Residential Scale This presentaion summarizes the...

393

Exploiting heavy oil reserves  

E-Print Network [OSTI]

North Sea investment potential Exploiting heavy oil reserves Beneath the waves in 3D Aberdeen.hamptonassociates.com pRINTED BY nB GroUP Paper sourced from sustainable forests CONTENTS 3/5 does the north Sea still industry partnership drives research into sensor systems 11 Beneath the waves in 3d 12/13 does

Levi, Ran

394

African oil plays  

SciTech Connect (OSTI)

The vast continent of Africa hosts over eight sedimentary basins, covering approximately half its total area. Of these basins, only 82% have entered a mature exploration phase, 9% have had little or no exploration at all. Since oil was first discovered in Africa during the mid-1950s, old play concepts continue to bear fruit, for example in Egypt and Nigeria, while new play concepts promise to become more important, such as in Algeria, Angola, Chad, Egypt, Gabon, and Sudan. The most exciting developments of recent years in African oil exploration are: (1) the Gamba/Dentale play, onshore Gabon; (2) the Pinda play, offshore Angola; (3) the Lucula/Toca play, offshore Cabinda; (4) the Metlaoui play, offshore Libya/Tunisia; (5) the mid-Cretaceous sand play, Chad/Sudan; and (6) the TAG-I/F6 play, onshore Algeria. Examples of these plays are illustrated along with some of the more traditional oil plays. Where are the future oil plays likely to develop No doubt, the Saharan basins of Algeria and Libya will feature strongly, also the presalt of Equatorial West Africa, the Central African Rift System and, more speculatively, offshore Ethiopia and Namibia, and onshore Madagascar, Mozambique, and Tanzania.

Clifford, A.J. (BHP Petroleum, Melbourne, Victoria (Australia))

1989-09-01T23:59:59.000Z

395

World Oil Transit Chokepoints  

Reports and Publications (EIA)

Chokepoints are narrow channels along widely used global sea routes, some so narrow that restrictions are placed on the size of vessel that can navigate through them. They are a critical part of global energy security due to the high volume of oil traded through their narrow straits.

2012-01-01T23:59:59.000Z

396

Naphthenic lube oils  

SciTech Connect (OSTI)

A process is disclosed for increasing the volume of lubricating oil base stocks recovered from a crude oil. A fraction having an atmospheric boiling range of about 675/sup 0/ to 1100/sup 0/ F. is recovered by vacuum distillation. This fraction is treated with furfural to extract a hydrocarbon mixture containing at least 50 volume % aromatic hydrocarbons. The raffinate is a lubricating oil base stock very high in paraffinic hydrocarbons and low in naphthenic hydrocarbons. The fraction extracted by the furfural contains at least about 50 volume % aromatic hydrocarbons and less than about 10 volume % paraffinic hydrocarbons. The mixture is hydrotreated to hydrogenate a substantial portion of the aromatic hydrocarbons. The hydrotreated product then is catalytically dewaxed. After removal of low boiling components, the finished lubricating oil base stock has a viscosity of at least about 200 SUS at 100/sup 0/ F., a pour point of less than 20/sup 0/ F. and contains at least 50 volume % of naphthenic hydrocarbons, a maximum of about 40 volume % aromatic hydrocarbons, and a maximum of about 10 volume % paraffinic hydrocarbons.

Hettinger Jr., W. P.; Beck, H. W.; Rozman, G. J.; Turrill, F. H.

1985-05-07T23:59:59.000Z

397

Oil and Global Adjustment  

E-Print Network [OSTI]

The current account surplus of the world’s major oil exporting economies – defined as the IMF’s fuel-exporting emerging economies plus Norway – increased from $110b to about $500b between 2002 and 2006. 2 In 2006, the current account surplus of the Gulf

Brad Setser

2007-01-01T23:59:59.000Z

398

Silica powders for powder evacuated thermal insulating panel and method  

DOE Patents [OSTI]

A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm{sup 3} and an external surface area in the range of about 90 to 600 m{sup 2}/g is described. The silica powders are prepared by reacting a tetraalkyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders. 2 figs.

Harris, M.T.; Basaran, O.A.; Kollie, T.G.; Weaver, F.J.

1996-01-02T23:59:59.000Z

399

Silica powders for powder evacuated thermal insulating panel and method  

DOE Patents [OSTI]

A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2/ g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

Harris, Michael T. (Knoxville, TN); Basaran, Osman A. (Oak Ridge, TN); Kollie, Thomas G. (Oak Ridge, TN); Weaver, Fred J. (Knoxville, TN)

1996-01-01T23:59:59.000Z

400

Silica powders for powder evacuated thermal insulating panel and method  

DOE Patents [OSTI]

A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2 /g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

Harris, Michael T. (Knoxville, TN); Basaran, Osman A. (Oak Ridge, TN); Kollie, Thomas G. (Oak Ridge, TN); Weaver, Fred J. (Knoxville, TN)

1994-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Silica powders for powder evacuated thermal insulating panel and method  

DOE Patents [OSTI]

A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2/ g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

Harris, Michael T. (Knoxville, TN); Basaran, Osman A. (Oak Ridge, TN); Kollie, Thomas G. (Oak Ridge, TN); Weaver, Fred J. (Knoxville, TN)

1995-01-01T23:59:59.000Z

402

Structural Oil Pan With Integrated Oil Filtration And Cooling System  

DOE Patents [OSTI]

An oil pan for an internal combustion engine includes a body defining a reservoir for collecting engine coolant. The reservoir has a bottom and side walls extending upwardly from the bottom to present a flanged lip through which the oil pan may be mounted to the engine. An oil cooler assembly is housed within the body of the oil pan for cooling lubricant received from the engine. The body includes an oil inlet passage formed integrally therewith for receiving lubricant from the engine and delivering lubricant to the oil cooler. In addition, the body also includes an oil pick up passage formed integrally therewith for providing fluid communication between the reservoir and the engine through the flanged lip.

Freese, V, Charles Edwin (Westland, MI)

2000-05-09T23:59:59.000Z

403

July 24, 2009, Visiting Speakers Program Panel Discussion - Governance and Regulations: U. S. to Lead or Lag in the 21st Century - Companion Book  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAX POLICIES7.pdfFuel2007 | Department7January 2015JimJulieand High ReliabilityNextby

404

Science for Energy Technology: The Industry Perspective (2011 EFRC Summit, panel session)  

SciTech Connect (OSTI)

A distinguished panel of industry leaders discussed how basic science impacts energy technology at the 2011 EFRC Summit. Panel members are Jeffrey Wadworth, President and CEO of Battelle Memorial Institute; David E. Carlson, the Chief Scientist for BP Solar; Yet-Ming Chiang, Professor at MIT and the founder of A123 Systems; and Catherine T. Hunt, the R&D Director of Innovation Sourcing and Sustainable Technologies at the Dow Chemical Company. The 2011 EFRC Summit and Forum brought together the EFRC community and science and policy leaders from universities, national laboratories, industry and government to discuss 'Science for our Nation's Energy Future.' In August 2009, the Office of Science established 46 Energy Frontier Research Centers. The EFRCs are collaborative research efforts intended to accelerate high-risk, high-reward fundamental research, the scientific basis for transformative energy technologies of the future. These Centers involve universities, national laboratories, nonprofit organizations, and for-profit firms, singly or in partnerships, selected by scientific peer review. They are funded at $2 to $5 million per year for a total planned DOE commitment of $777 million over the initial five-year award period, pending Congressional appropriations. These integrated, multi-investigator Centers are conducting fundamental research focusing on one or more of several 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The purpose of the EFRCs is to integrate the talents and expertise of leading scientists in a setting designed to accelerate research that transforms the future of energy and the environment.

Wadsworth, Jeffrey (Battelle Memorial Institute) [Battelle Memorial Institute; Carlson, David E. (BP Solar) [BP Solar; Chiang, Yet-Ming (MIT and A123 Systems) [MIT and A123 Systems; Hunt, Catherine T. (Dow Chemical) [Dow Chemical

2011-05-25T23:59:59.000Z

405

Science for Energy Technology: The Industry Perspective (2011 EFRC Summit, panel session)  

ScienceCinema (OSTI)

A distinguished panel of industry leaders discussed how basic science impacts energy technology at the 2011 EFRC Summit. Panel members are Jeffrey Wadworth, President and CEO of Battelle Memorial Institute; David E. Carlson, the Chief Scientist for BP Solar; Yet-Ming Chiang, Professor at MIT and the founder of A123 Systems; and Catherine T. Hunt, the R&D Director of Innovation Sourcing and Sustainable Technologies at the Dow Chemical Company. The 2011 EFRC Summit and Forum brought together the EFRC community and science and policy leaders from universities, national laboratories, industry and government to discuss 'Science for our Nation's Energy Future.' In August 2009, the Office of Science established 46 Energy Frontier Research Centers. The EFRCs are collaborative research efforts intended to accelerate high-risk, high-reward fundamental research, the scientific basis for transformative energy technologies of the future. These Centers involve universities, national laboratories, nonprofit organizations, and for-profit firms, singly or in partnerships, selected by scientific peer review. They are funded at $2 to $5 million per year for a total planned DOE commitment of $777 million over the initial five-year award period, pending Congressional appropriations. These integrated, multi-investigator Centers are conducting fundamental research focusing on one or more of several 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The purpose of the EFRCs is to integrate the talents and expertise of leading scientists in a setting designed to accelerate research that transforms the future of energy and the environment.

Wadsworth, Jeffrey (Battelle Memorial Institute); Carlson, David E. (BP Solar); Chiang, Yet-Ming (MIT and A123 Systems); Hunt, Catherine T. (Dow Chemical)

2012-03-20T23:59:59.000Z

406

Heat Recovery From Arc Furnaces Using Water Cooled Panels  

E-Print Network [OSTI]

HEAT RECOVERY FROM ARC FURNACES USING WATER COOLED PANELS D. F. Darby Deere & Company Moline, Illinois ABSTRACT In 1980-81, the John Deere Foundry at East Moline underwent an expansion program that in creased its capacity by over 60...%. This expansion was centered around the melt department where the four existing 13MVA electric arc furnaces were augmented with two additional 13MVA arc furnaces. A waste heat recovery system was installed on all six of the arc furnaces which, with modifica...

Darby, D. F.

407

Independent Panel Evaluation of Dry Sludge PISA Program  

SciTech Connect (OSTI)

Dr. Kirk Yeager and Mr. Marvin Banks from Energetic Material Research and Technology Center (EMRTC) evaluated the Savannah River Site (SRS) efforts in the Dry Sludge program. They evaluated four program areas: energetic material formation, stability, initiation, and propagation. The panel evaluation included a site visit (July 13, 1999 and July 14, 1999) as well as a review of various reports and presentations by researchers involved in the program.

Fondeur, F.F.

1999-10-20T23:59:59.000Z

408

CDM Accreditation Panel CDM AP | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectricEnergyCTBarreis a city in Chittenden County,47Accreditation Panel CDM AP

409

NOTES AND DISCUSSIONS Note on thermal heating efficiency  

E-Print Network [OSTI]

. This is the conversion problem faced in every home, where one has heat from a gas, oil, wood, or coal flame but wants known, fact is of current pedagogical interest and practical importance. © 2003 American Association played a uniquely important role in the development of thermody- namics. There the distinction between

Rodriguez, Carlos

410

Opportunities to improve oil productivity in unstructured deltaic reservoirs  

SciTech Connect (OSTI)

This report contains presentations presented at a technical symposium on oil production. Chapter 1 contains summaries of the presentations given at the Department of Energy (DOE)-sponsored symposium and key points of the discussions that followed. Chapter 2 characterizes the light oil resource from fluvial-dominated deltaic reservoirs in the Tertiary Oil Recovery Information System (TORIS). An analysis of enhanced oil recovery (EOR) and advanced secondary recovery (ASR) potential for fluvial-dominated deltaic reservoirs based on recovery performance and economic modeling as well as the potential resource loss due to well abandonments is presented. Chapter 3 provides a summary of the general reservoir characteristics and properties within deltaic deposits. It is not exhaustive treatise, rather it is intended to provide some basic information about geologic, reservoir, and production characteristics of deltaic reservoirs, and the resulting recovery problems.

Not Available

1991-01-01T23:59:59.000Z

411

The inverse problems of wing panel manufacture processes  

SciTech Connect (OSTI)

It is shown that inverse problems of steady-state creep bending of plates in both the geometrically linear and nonlinear formulations can be represented in a variational formulation. Steady-state values of the obtained functionals corresponding to the solutions of the problems of inelastic deformation and springback are determined by applying a finite element procedure to the functionals. Optimal laws of creep deformation are formulated using the criterion of minimizing damage in the functionals of the inverse problems. The formulated problems are reduced to the problems solved by the finite element method using MSC.Marc software. Currently, forming of light metals poses tremendous challenges due to their low ductility at room temperature and their unusual deformation characteristics at hot-cold work: strong asymmetry between tensile and compressive behavior, and a very pronounced anisotropy. We used the constitutive models of steady-state creep of initially transverse isotropy structural materials the kind of the stress state has influence. The paper gives basics of the developed computer-aided system of design, modeling, and electronic simulation targeting the processes of manufacture of wing integral panels. The modeling results can be used to calculate the die tooling, determine the panel processibility, and control panel rejection in the course of forming.

Oleinikov, A. I., E-mail: a.i.oleinikov@mail.ru [Komsomolsk-on-Amur State Technical University, Lenina prospect 27, Komsomolsk-on-Amur, 681013, Russian Federation, and Institute of Machinery and Metallurgy Far Eastern Branch of the Russian Academy of Sciences, Metallurgov Street 1, Komsomolsk-on-Am (Russian Federation); Bormotin, K. S., E-mail: cvmi@knastu.ru [Komsomolsk-on-Amur State Technical University, Lenina prospect 27, Komsomolsk-on-Amur, 681013, Russian Federation (Russian Federation)

2013-12-16T23:59:59.000Z

412

Structural behavior of silicone bonded glass block panels  

SciTech Connect (OSTI)

Silicone sealant was submitted for mortar in bonding glass blocks. The sealant`s tensile and shear strengths and stiffnesses were determined. Joints bonding two glass blocks were tested for stiffness and strength in tension, bending, out-of-plane shear, and in-plane shear. Bending tests were done on specimens one block wide and four blocks long to evaluate one-way bending behavior. A six block by six block panel, supported on all four sides, was built and tested under simulated wind load. An analytical model with material nonlinearity in the joints was developed for the one-way bending case. It gave good comparisons with the experimental data to load levels approaching failure. A more complex analytical model was developed for the two-way panel. It was only valid for lower load levels, in the range of potential allowable design loads, but compared well with test results. Silicone bonded glass block panels have potential for meeting the wind load requirements necessary for exterior use.

Chang, K.F. [Structural Engineering Associates, Inc., San Antonio, TX (United States); Sandberg, L.B. [Michigan Technological Univ. Houghton, MI (United States)

1996-12-31T23:59:59.000Z

413

Markets during world oil supply crises: an analysis of industry, consumer, and governmental response  

SciTech Connect (OSTI)

An analysis of the response of American markets to supply crises in world oil markets is presented. It addresses four main issues: the efficiency of the operation of American oil markets during oil supply crises; the problems of both economic efficiency and social equity which arise during the American adaptation process; the propriety of the Federal government's past policy responses to these problems; and the relationship between perceptions of the problems caused by world oil crises and the real economic natures of these problems. Specifically, Chapter 1 presents a theoretical discussion of the effects of a world supply disruption on the price level and supply availability of the world market oil to any consuming country including the US Chapter 2 provides a theoretical and empirical analysis of the efficiency of the adaptations of US oil product markets to higher world oil prices. Chapter 3 examines the responses of various groups of US oil firms to the alterations observed in world markets, while Chapter 4 presents a theoretical explanation for the price-lagging behavior exhibited by firms in the US oil industry. Chapter 5 addresses the nature of both real and imagined oil market problems in the US during periods of world oil market transition. (MCW)

Erfle, Stephen; Pound, John; Kalt, Joseph

1981-04-01T23:59:59.000Z

414

Black Gold & Fool’s Gold: Speculation in the Oil Futures Market  

E-Print Network [OSTI]

This paper addresses the question of whether the oil price spike of 2003-2008 was a bubble. We document and discuss what is known about the level of speculation in the paper oil market. We then analyze the dynamics of the ...

Parsons, John E.

415

A new cylinder cooling system using oil  

SciTech Connect (OSTI)

The design of engine cylinders must satisfy two conflicting requirements, good cooling performance and ease of manufacture. A cooling system was designed to permit the circulation of engine lubricating oil as a coolant at high speed through grooves provided on the external periphery of the cylinder liner. Testing in an actual operating engine confirmed that this cooling system design not only provides better heat transfer and higher cooling performance but also simplifies the manufacturing of the cylinder since external cooling fins are not required. In this paper, the authors will discuss the cylinder cooling effect of the new cylinder cooling system, referring mainly to the test results of a single-cylinder motorcycle engine with lubricating oil from the crankcase used as the coolant.

Harashina, Kenichi; Murata, Katsuhiro; Satoh, Hiroshi; Shimizu, Yasuo; Hamamura, Masahiro

1995-12-31T23:59:59.000Z

416

Microbial enhancement of oil recovery: Recent advances  

SciTech Connect (OSTI)

During recent years, systematic, scientific, and engineering effort by researchers in the United States and abroad, has established the scientific basis for Microbial Enhanced Oil Recovery (MEOR) technology. The successful application of MEOR technology as an oil recovery process is a goal of the Department of Energy (DOE). Research efforts involving aspects of MEOR in the microbiological, biochemical, and engineering fields led DOE to sponsor an International Conference at Brookhaven National Laboratory in 1992, to facilitate the exchange of information and a discussion of ideas for the future research emphasis. At this, the Fourth International MEOR Conference, where international attendees from 12 countries presented a total of 35 papers, participants saw an equal distribution between research'' and field applications.'' In addition, several modeling and state-of-the-art'' presentations summed up the present status of MEOR science and engineering. Individual papers in this proceedings have been process separately for inclusion in the Energy Science and Technology Database.

Premuzic, E.T.; Woodhead, A.D.; Vivirito, K.J. (eds.)

1992-01-01T23:59:59.000Z

417

Sonderforschungsbereich 386: Analyse Diskreter Strukturen Discussion Paper No. 214  

E-Print Network [OSTI]

. Acknowledgements I would like to thank Amartya Sen and Allan Hill for helpful suggestions and discussions

Krivobokova, Tatyana

418

Ethanol Production, Distribution, and Use: Discussions on Key Issues (Presentation)  

SciTech Connect (OSTI)

From production to the environment, presentation discusses issues surrounding ethanol as a transportation fuel.

Harrow, G.

2008-05-14T23:59:59.000Z

419

Oil consumption, pollutant emission, oil proce volatility and economic activities in selected Asian Developing Economies.  

E-Print Network [OSTI]

??It is now well established in the literature that oil consumption, oil price shocks, and oil price volatility may impact the economic activities negatively. Studies… (more)

Rafiq, Shuddhasattwa

2009-01-01T23:59:59.000Z

420

Just oil? The distribution of environmental and social impacts of oil production and consumption  

E-Print Network [OSTI]

bution of the impacts of oil production and consumption. Theof harmful effects from oil production and use. A criticaland procedural impacts of oil production and consumption

O'Rourke, D; Connolly, S

2003-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Unconventional Oil and Gas Resources  

SciTech Connect (OSTI)

World oil use is projected to grow to 98 million b/d in 2015 and 118 million b/d in 2030. Total world natural gas consumption is projected to rise to 134 Tcf in 2015 and 182 Tcf in 2030. In an era of declining production and increasing demand, economically producing oil and gas from unconventional sources is a key challenge to maintaining global economic growth. Some unconventional hydrocarbon sources are already being developed, including gas shales, tight gas sands, heavy oil, oil sands, and coal bed methane. Roughly 20 years ago, gas production from tight sands, shales, and coals was considered uneconomic. Today, these resources provide 25% of the U.S. gas supply and that number is likely to increase. Venezuela has over 300 billion barrels of unproven extra-heavy oil reserves which would give it the largest reserves of any country in the world. It is currently producing over 550,000 b/d of heavy oil. Unconventional oil is also being produced in Canada from the Athabasca oil sands. 1.6 trillion barrels of oil are locked in the sands of which 175 billion barrels are proven reserves that can be recovered using current technology. Production from 29 companies now operating there exceeds 1 million barrels per day. The report provides an overview of continuous petroleum sources and gives a concise overview of the current status of varying types of unconventional oil and gas resources. Topics covered in the report include: an overview of the history of Oil and Natural Gas; an analysis of the Oil and Natural Gas industries, including current and future production, consumption, and reserves; a detailed description of the different types of unconventional oil and gas resources; an analysis of the key business factors that are driving the increased interest in unconventional resources; an analysis of the barriers that are hindering the development of unconventional resources; profiles of key producing regions; and, profiles of key unconventional oil and gas producers.

none

2006-09-15T23:59:59.000Z

422

An Assessment of Inertial Confinement Fusion Target Physics A Panel on Fusion Target Physics ("the Panel") will serve as a technical resource to the  

E-Print Network [OSTI]

An Assessment of Inertial Confinement Fusion Target Physics A Panel on Fusion Target Physics ("the Panel") will serve as a technical resource to the Committee on Inertial Confinement Energy Systems ("the Physics will prepare a report that will assess the current performance of fusion targets associated

423

Recent hydrocarbon developments in Latin America: Key issues in the downstream oil sector  

SciTech Connect (OSTI)

This report discusses the following: (1) An overview of major issues in the downstream oil sector, including oil demand and product export availability, the changing product consumption pattern, and refineries being due for major investment; (2) Recent upstream developments in the oil and gas sector in Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Mexico, Peru, Trinidad and Tobago, and Venezuela; (3) Recent downstream developments in the oil and gas sector in Argentina, Chile, Colombia, Ecuador, Mexico, Peru, Cuba, and Venezuela; (4) Pipelines in Argentina, Bolivia, Brazil, Chile, and Mexico; and (5) Regional energy balance. 4 figs., 5 tabs.

Wu, K.; Pezeshki, S.

1995-03-01T23:59:59.000Z

424

Modal parameters for a flat plate supported by an oil film.  

SciTech Connect (OSTI)

This paper examines the resonant frequencies, Mode shapes, and damping values for a square plate suppcirted by an oil film. Such a study is motivated by interesl: in oil-supported slip tables used for vibration testing. Rtssonant frequencies and percent critical damping were measured for four cases: plate freely suspended; plate with free end conditions and suppoited by an oil film; plate fixed at several locations; and plate fixed at several locations while supported by an oil film. Analytical estimates of the modal properties and modal propertie!j derived from measured data are compared and discrepancies discussed.

Jauhola, A. G. (Andrew G.); Kinzel, E. C. (Edward C.); Reding, D. (Derek); Hunter, N. F. (Norman F.)

2003-01-01T23:59:59.000Z

425

Electrical installations in oil shale mines. Open file report 21 Sep 81-13 Aug 83  

SciTech Connect (OSTI)

This report presents recommended guidelines and regulatory changes applicable to electrical installations in underground oil shale mines. These recommendations are based on information gathered from oil shale operators, government agencies, and other knowledgeable sources familiar with existing plans for mining systems and electrical installations, and on present understanding of the problems and hazards associated with oil shale mining. Additional discussions of specific electrical problems related to oil shale mining include ground fault current levels, permissible electric wheel motors, permissible batteries and electric starting systems, intrinsically safe instrumentation, and applicability of existing test standards.

Gillenwater, B.B.; Kline, R.J.; Paas, N.

1983-08-01T23:59:59.000Z

426

Shale oil recovery process  

DOE Patents [OSTI]

A process of producing within a subterranean oil shale deposit a retort chamber containing permeable fragmented material wherein a series of explosive charges are emplaced in the deposit in a particular configuration comprising an initiating round which functions to produce an upward flexure of the overburden and to initiate fragmentation of the oil shale within the area of the retort chamber to be formed, the initiating round being followed in a predetermined time sequence by retreating lines of emplaced charges developing further fragmentation within the retort zone and continued lateral upward flexure of the overburden. The initiating round is characterized by a plurality of 5-spot patterns and the retreating lines of charges are positioned and fired along zigzag lines generally forming retreating rows of W's. Particular time delays in the firing of successive charges are disclosed.

Zerga, Daniel P. (Concord, CA)

1980-01-01T23:59:59.000Z

427

Oil shale retort apparatus  

DOE Patents [OSTI]

A retorting apparatus including a vertical kiln and a plurality of tubes for delivering rock to the top of the kiln and removal of processed rock from the bottom of the kiln so that the rock descends through the kiln as a moving bed. Distributors are provided for delivering gas to the kiln to effect heating of the rock and to disturb the rock particles during their descent. The distributors are constructed and disposed to deliver gas uniformly to the kiln and to withstand and overcome adverse conditions resulting from heat and from the descending rock. The rock delivery tubes are geometrically sized, spaced and positioned so as to deliver the shale uniformly into the kiln and form symmetrically disposed generally vertical paths, or "rock chimneys", through the descending shale which offer least resistance to upward flow of gas. When retorting oil shale, a delineated collection chamber near the top of the kiln collects gas and entrained oil mist rising through the kiln.

Reeves, Adam A. (Grand Junction, CO); Mast, Earl L. (Norman, OK); Greaves, Melvin J. (Littleton, CO)

1990-01-01T23:59:59.000Z

428

Oil Price Volatility  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing ReservoirsYear-Month WeekReservesYear Jan Feb0

429

Crude Oil Prices  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs (MillionExpectedChangesAdministration Cost and

430

Emulsified industrial oils recycling  

SciTech Connect (OSTI)

The industrial lubricant market has been analyzed with emphasis on current and/or developing recycling and re-refining technologies. This task has been performed for the United States and other industrialized countries, specifically France, West Germany, Italy and Japan. Attention has been focused at emulsion-type fluids regardless of the industrial application involved. It was found that emulsion-type fluids in the United States represent a much higher percentage of the total fluids used than in other industrialized countries. While recycling is an active matter explored by the industry, re-refining is rather a result of other issues than the mere fact that oil can be regenerated from a used industrial emulsion. To extend the longevity of an emulsion is a logical step to keep expenses down by using the emulsion as long as possible. There is, however, another important factor influencing this issue: regulations governing the disposal of such fluids. The ecological question, the respect for nature and the natural balances, is often seen now as everybody's task. Regulations forbid dumping used emulsions in the environment without prior treatment of the water phase and separation of the oil phase. This is a costly procedure, so recycling is attractive since it postpones the problem. It is questionable whether re-refining of these emulsions - as a business - could stand on its own if these emulsions did not have to be taken apart for disposal purposes. Once the emulsion is separated into a water and an oil phase, however, re-refining of the oil does become economical.

Gabris, T.

1982-04-01T23:59:59.000Z

431

Using simple models to describe oil production from unconventional reservoirs.  

E-Print Network [OSTI]

??Shale oil (tight oil) is oil trapped in low permeability shale or sandstone. Shale oil is a resource with great potential as it is heavily… (more)

Song, Dong Hee

2014-01-01T23:59:59.000Z

432

Major Oil Plays in Utah and Vicinity  

SciTech Connect (OSTI)

Utah oil fields have produced over 1.2 billion barrels (191 million m{sup 3}). However, the 13.7 million barrels (2.2 million m{sup 3}) of production in 2002 was the lowest level in over 40 years and continued the steady decline that began in the mid-1980s. The Utah Geological Survey believes this trend can be reversed by providing play portfolios for the major oil-producing provinces (Paradox Basin, Uinta Basin, and thrust belt) in Utah and adjacent areas in Colorado and Wyoming. Oil plays are geographic areas with petroleum potential caused by favorable combinations of source rock, migration paths, reservoir rock characteristics, and other factors. The play portfolios will include: descriptions and maps of the major oil plays by reservoir; production and reservoir data; case-study field evaluations; locations of major oil pipelines; identification and discussion of land-use constraints; descriptions of reservoir outcrop analogs; and summaries of the state-of-the-art drilling, completion, and secondary/tertiary techniques for each play. This report covers research activities for the sixth quarter of the project (October 1 through December 31, 2003). This work included describing outcrop analogs for the Jurassic Twin Creek Limestone and Mississippian Leadville Limestone, major oil producers in the thrust belt and Paradox Basin, respectively, and analyzing best practices used in the southern Green River Formation play of the Uinta Basin. Production-scale outcrop analogs provide an excellent view of reservoir petrophysics, facies characteristics, and boundaries contributing to the overall heterogeneity of reservoir rocks. They can be used as a ''template'' for evaluation of data from conventional core, geophysical and petrophysical logs, and seismic surveys. In the Utah/Wyoming thrust belt province, the Jurassic Twin Creek Limestone produces from subsidiary closures along major ramp anticlines where the low-porosity limestone beds are extensively fractured and sealed by overlying argillaceous and non-fractured units. The best outcrop analogs for Twin Creek reservoirs are found at Devils Slide and near the town of Peoa, Utah, where fractures in dense, homogeneous non-porous limestone beds are in contact with the basal siltstone units (containing sealed fractures) of the overlying units. The shallow marine, Mississippian Leadville Limestone is a major oil and gas reservoir in the Paradox Basin of Utah and Colorado. Hydrocarbons are produced from basement-involved, northwest-trending structural traps with closure on both anticlines and faults. Excellent outcrops of Leadville-equivalent rocks are found along the south flank of the Uinta Mountains, Utah. For example, like the Leadville, the Mississippian Madison Limestone contains zones of solution breccia, fractures, and facies variations. When combined with subsurface geological and production data, these outcrop analogs can improve (1) development drilling and production strategies such as horizontal drilling, (2) reservoir-simulation models, (3) reserve calculations, and (4) design and implementation of secondary/tertiary oil recovery programs and other best practices used in the oil fields of Utah and vicinity. In the southern Green River Formation play of the Uinta Basin, optimal drilling, development, and production practices consist of: (1) owning drilling rigs and frac holding tanks; (2) perforating sandstone beds with more than 8 percent neutron porosity and stimulate with separate fracture treatments; (3) placing completed wells on primary production using artificial lift; (4) converting wells relatively soon to secondary waterflooding maintaining reservoir pressure above the bubble point to maximize oil recovery; (5) developing waterflood units using an alternating injector--producer pattern on 40-acre (16-ha) spacing; and (6) recompleting producing wells by perforating all beds that are productive in the waterflood unit. As part of technology transfer activities during this quarter, an abstract describing outcrop reservoir analogs was accepted by the American Assoc

Thomas C. Chidsey; Craig D. Morgan; Kevin McClure; Douglas A. Sprinkel; Roger L. Bon; Hellmut H. Doelling

2003-12-31T23:59:59.000Z

433

MAJOR OIL PLAYS IN UTAH AND VICINITY  

SciTech Connect (OSTI)

Utah oil fields have produced a total of 1.2 billion barrels (191 million m{sup 3}). However, the 15 million barrels (2.4 million m{sup 3}) of production in 2000 was the lowest level in over 40 years and continued the steady decline that began in the mid-1980s. The Utah Geological Survey believes this trend can be reversed by providing play portfolios for the major oil producing provinces (Paradox Basin, Uinta Basin, and thrust belt) in Utah and adjacent areas in Colorado and Wyoming. Oil plays are geographic areas with petroleum potential caused by favorable combinations of source rock, migration paths, reservoir rock characteristics, and other factors. The play portfolios will include: descriptions and maps of the major oil plays by reservoir; production and reservoir data; case-study field evaluations; summaries of the state-of-the-art drilling, completion, and secondary/tertiary techniques for each play; locations of major oil pipelines; descriptions of reservoir outcrop analogs; and identification and discussion of land use constraints. All play maps, reports, databases, and so forth, produced for the project will be published in interactive, menu-driven digital (web-based and compact disc) and hard-copy formats. This report covers research activities for the first quarter of the first project year (July 1 through September 30, 2002). This work included producing general descriptions of Utah's major petroleum provinces, gathering field data, and analyzing best practices in the Utah Wyoming thrust belt. Major Utah oil reservoirs and/or source rocks are found in Devonian through Permian, Jurassic, Cretaceous, and Tertiary rocks. Stratigraphic traps include carbonate buildups and fluvial-deltaic pinchouts, and structural traps include basement-involved and detached faulted anticlines. Best practices used in Utah's oil fields consist of waterflood, carbon-dioxide flood, gas-injection, and horizontal drilling programs. Nitrogen injection and horizontal drilling programs have been successfully employed to enhance oil production from the Jurassic Nugget Sandstone (the major thrust belt oil-producing reservoir) in Wyoming's Painter Reservoir and Ryckman Creek fields. At Painter Reservoir field a tertiary, miscible nitrogen-injection program is being conducted to raise the reservoir pressure to miscible conditions. Supplemented with water injection, the ultimate recovery will be 113 million bbls (18 million m{sup 3}) of oil (a 68 percent recovery factor over a 60-year period). The Nugget reservoir has significant heterogeneity due to both depositional facies and structural effects. These characteristics create ideal targets for horizontal wells and horizontal laterals drilled from existing vertical wells. Horizontal drilling programs were conducted in both Painter Reservoir and Ryckman Creek fields to encounter potential undrained compartments and increase the overall field recovery by 0.5 to 1.5 percent per horizontal wellbore. Technology transfer activities consisted of exhibiting a booth display of project materials at the Rocky Mountain Section meeting of the American Association of Petroleum Geologists, a technical presentation to the Wyoming State Geological Survey, and two publications. A project home page was set up on the Utah Geological Survey Internet web site.

Thomas C. Chidsey, Jr.

2003-01-01T23:59:59.000Z

434

Unconventional oil market assessment: ex situ oil shale.  

E-Print Network [OSTI]

??This thesis focused on exploring the economic limitations for the development of western oil shale. The analysis was developed by scaling a known process and… (more)

Castro-Dominguez, Bernardo

2010-01-01T23:59:59.000Z

435

Agreements and Disagreements in a Computer-Mediated Discussion  

E-Print Network [OSTI]

Agreements and disagreements in a predominantly female computer-mediated discussion group which discusses soap operas are analyzed in terms of their message features. The findings differ from those on agreements and disagreements in oral interaction...

Baym, Nancy K.

1996-01-01T23:59:59.000Z

436

What's Next for Nuclear Energy? MIT Students Discuss Path Forward...  

Broader source: Energy.gov (indexed) [DOE]

What's Next for Nuclear Energy? MIT Students Discuss Path Forward What's Next for Nuclear Energy? MIT Students Discuss Path Forward June 19, 2012 - 10:41am Addthis Dr. Peter Lyons,...

437

HIV genetic research to be discussed at Bradbury Science Museum...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to be discussed Feb. 12 HIV genetic research to be discussed at Bradbury Science Museum lecture Feb. 12 Tanmoy Bhattacharya will talk about the Lab's research in HIV genetics...

438

Reasons and current outlook for the sale of federal royalty oil to small and independent refiners  

SciTech Connect (OSTI)

The Department of Interior receives a royalty from oil production on federal lands. Interior can take the royalty as a cash payment or a portion of the oil itself, which it can then sell to small and independent refiners who are determined to be in need of crude oil supplies. Sales of this so-called royalty oil have been held about every 3 years since 1970. In early 1985, Interior announced its intention to terminate the program because of its declining importance and proposed legislation to that effect. While GAO sees no compelling need to legislatively restrict Interior's ability to hold future royalty oil sales now or in the future, it has identified several ways to improve the program's effectiveness. This report examines Interior's basis for the most recent sales and the current status and need for the royalty oil program and discusses ways in which its administration might be improved if future sales are held.

Not Available

1985-08-26T23:59:59.000Z

439

Analysis of synthetic motor oils for additive elements by ICP-AES  

SciTech Connect (OSTI)

Standard motor oils are made by blending paraffinic or naphthenic mineral oil base stocks with additive packages containing anti-wear agents, dispersants, corrosion inhibitors, and viscosity index improvers. The blender can monitor the correct addition of the additives by determining the additive elements in samples dissolved in a solvent by ICP-AES. Internal standardization is required to control sample transport interferences due to differences in viscosity between samples and standards. Synthetic motor oils, made with poly-alpha-olefins and trimethylol propane esters, instead of mineral oils, pose an additional challenge since these compounds affect the plasma as well as having sample transport interference considerations. The synthetic lubricant base stocks add significant oxygen to the sample matrix, which makes the samples behave differently than standards prepared in mineral oil. Determination of additive elements in synthetic motor oils will be discussed.

Williams, M.C.; Salmon, S.G. [Texaco Inc., Beacon, NY (United States)

1995-12-31T23:59:59.000Z

440

Final Discussion | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

Final Discussion Scientific User Facilities (SUF) Division SUF Home About User Facilities Projects Accelerator & Detector Research Science Highlights Principal Investigators'...

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

PNNL Expert Alan Zacher Discusses Bio-Based Fuels  

SciTech Connect (OSTI)

Chemical Engineer Alan Zacher discusses the process for creating fuels from renewable sources in an efficient manner.

Alan Zacher

2011-10-01T23:59:59.000Z

442

PNNL Expert Alan Zacher Discusses Bio-Based Fuels  

ScienceCinema (OSTI)

Chemical Engineer Alan Zacher discusses the process for creating fuels from renewable sources in an efficient manner.

Alan Zacher

2012-12-31T23:59:59.000Z

443

BP Oil Spill November 10, 2011  

E-Print Network [OSTI]

BP Oil Spill Qiyam Tung November 10, 2011 1 Introduction Figure 1: BP Oil spill (source: http://thefoxisblack.com/2010/05/02/the-bp-oil-spill-in-the-gulf-of-mexico/) Last year, there was a major oil spill caused major techniques to minimize the threat once it happened. What kind of damage would an oil spill like this cause

Lega, Joceline

444

The twentieth oil shale symposium proceedings  

SciTech Connect (OSTI)

This book contains 20 selections. Some of the titles are: The technical contributions of John Ward Smith in oil shale research; Oil shale rubble fires: ignition and extinguishment; Fragmentation of eastern oil shale for in situ recovery; A study of thermal properties of Chinese oil shale; and Natural invasion of native plants on retorted oil shale.

Gary, J.H.

1987-01-01T23:59:59.000Z

445

Energy Frontier Research Centers: A View from Senior EFRC Representatives (2011 EFRC Summit, panel session)  

SciTech Connect (OSTI)

A distinguished panel of scientists from the EFRC community provide their perspective on the importance of EFRCs for addressing critical energy needs at the 2011 EFRC Summit. Persis Drell, Director at SLAC, served as moderator. Panel members are Neal Armstrong (Director of the Center for Interface Science: Solar Electric Materials, led by the University of Arizona), Emily Carter (Co-Director of the Combustion EFRC, led by Princeton University. She is also Team Leader of the Heterogeneous Functional Materials Center, led by the University of South Caroline), Don DePaolo (Director of the Center for Nanoscale Control of Geologic CO2, led by LBNL), and Brent Gunnoe (Director of the Center for Catalytic Hydrocarbon Functionalization, led by the University of Virginia). The 2011 EFRC Summit and Forum brought together the EFRC community and science and policy leaders from universities, national laboratories, industry and government to discuss "Science for our Nation's Energy Future." In August 2009, the Office of Science established 46 Energy Frontier Research Centers. The EFRCs are collaborative research efforts intended to accelerate high-risk, high-reward fundamental research, the scientific basis for transformative energy technologies of the future. These Centers involve universities, national laboratories, nonprofit organizations, and for-profit firms, singly or in partnerships, selected by scientific peer review. They are funded at $2 to $5 million per year for a total planned DOE commitment of $777 million over the initial five-year award period, pending Congressional appropriations. These integrated, multi-investigator Centers are conducting fundamental research focusing on one or more of several “grand challenges” and use-inspired “basic research needs” recently identified in major strategic planning efforts by the scientific community. The purpose of the EFRCs is to integrate the talents and expertise of leading scientists in a setting designed to accelerate research that transforms the future of energy and the environment.

Drell, Persis (SLAC) [SLAC; Armstrong, Neal (University of Arizona) [University of Arizona; Carter, Emily (Princeton University) [Princeton University; DePaolo, Don (Lawrence Berkeley National Laboratory) [Lawrence Berkeley National Laboratory; Gunnoe, Brent (University of Virginia) [University of Virginia

2011-05-25T23:59:59.000Z

446

Energy Frontier Research Centers: A View from Senior EFRC Representatives (2011 EFRC Summit, panel session)  

ScienceCinema (OSTI)

A distinguished panel of scientists from the EFRC community provide their perspective on the importance of EFRCs for addressing critical energy needs at the 2011 EFRC Summit. Persis Drell, Director at SLAC, served as moderator. Panel members are Neal Armstrong (Director of the Center for Interface Science: Solar Electric Materials, led by the University of Arizona), Emily Carter (Co-Director of the Combustion EFRC, led by Princeton University. She is also Team Leader of the Heterogeneous Functional Materials Center, led by the University of South Caroline), Don DePaolo (Director of the Center for Nanoscale Control of Geologic CO2, led by LBNL), and Brent Gunnoe (Director of the Center for Catalytic Hydrocarbon Functionalization, led by the University of Virginia). The 2011 EFRC Summit and Forum brought together the EFRC community and science and policy leaders from universities, national laboratories, industry and government to discuss "Science for our Nation's Energy Future." In August 2009, the Office of Science established 46 Energy Frontier Research Centers. The EFRCs are collaborative research efforts intended to accelerate high-risk, high-reward fundamental research, the scientific basis for transformative energy technologies of the future. These Centers involve universities, national laboratories, nonprofit organizations, and for-profit firms, singly or in partnerships, selected by scientific peer review. They are funded at $2 to $5 million per year for a total planned DOE commitment of $777 million over the initial five-year award period, pending Congressional appropriations. These integrated, multi-investigator Centers are conducting fundamental research focusing on one or more of several ?grand challenges? and use-inspired ?basic research needs? recently identified in major strategic planning efforts by the scientific community. The purpose of the EFRCs is to integrate the talents and expertise of leading scientists in a setting designed to accelerate research that transforms the future of energy and the environment.

Drell, Persis (SLAC); Armstrong, Neal (University of Arizona); Carter, Emily (Princeton University); DePaolo, Don (Lawrence Berkeley National Laboratory); Gunnoe, Brent (University of Virginia)

2012-03-16T23:59:59.000Z

447

Large Panels with Common Factors and Spatial Correlations  

E-Print Network [OSTI]

;1 (#6;t) is bounded for all N , then under the granularity conditions (13)-(14) we have lim N!1 V ar(w0t#0;1zt jIt#0;1 ) = 0: A particular form of a CWD process arises when pairwise correlations take non-zero values only across ?nite subsets of units... sectional samples with strong co-movements. Panels with common factors have been applied to characterize the dynamic of stock and bond returns (Chamberlain and Rothschild 1983; Connor and Korajczyk, 1993; Kapetanios and Pesaran, 2007), and in macroeconomics...

Hashem, Pesaran

448

Second Panel of Disposal Rooms Completed in WIPP Underground  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administrationcontroller systemsBi (2) Sr (2)ScienceScientists InSearchsuperconduct*Chu|Second Panel

449

Structural Insulated Panel Association (SIPA) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revisionEnvReviewNonInvasiveExplorationUT-g GrantAtlas (PACAOpen EnergyInsulated Panel Association (SIPA) Jump to:

450

Reactive gases evolved during pyrolysis of Devonian oil shale  

SciTech Connect (OSTI)

Computer modeling of oil shale pyrolysis is an important part of the Lawrence Livermore National Laboratory (LLNL) Oil Shale Program. Models containing detailed chemistry have been derived from an investigation of Colorado oil shale. We are currently attempting to use models to treat more completely reactions of nitrogen and sulfur compounds in the retort to better understand emissions. Batch retorting work on Devonian oil shale is proving particularly useful for this study of nitrogen/sulfur chemistry. Improved analytical methods have been developed to quantitatively determine reactive volatiles at the parts-per-million level. For example, the triple quadrupole mass spectrometer (TQMS) is used in the chemical ionization (CI) mode to provide real-time analytical data on ammonia evolution as the shale is pyrolyzed. A heated transfer line and inlet ensure rapid and complete introduction of ammonia to the instrument by preventing water condensation. Ammonia and water release data suitable for calculating kinetic parameters have been obtained from a New Albany Shale sample. An MS/MS technique with the TQMS in the electron ionization (EI) mode allows hydrogen sulfide, carbonyl sulfide, and certain trace organic sulfur compounds to be monitored during oil shale pyrolysis. Sensitivity and selectivity for these compounds have been increased by applying artificial intelligence techniques to tuning of the spectrometer. Gas evolution profiles (100 to 900/sup 0/C) are reported for hydrogen sulfide, water, ammonia, and trace sulfur species formed during pyrolysis of Devonian oil shale. Implications for retorting chemistry are discussed. 18 refs., 11 figs., 3 tabs.

Coburn, T.T.; Crawford, R.W.; Gregg, H.R.; Oh, M.S.

1986-11-01T23:59:59.000Z

451

Peaking of world oil production: Impacts, mitigation, & risk management  

SciTech Connect (OSTI)

The peaking of world oil production presents the U.S. and the world with an unprecedented risk management problem. As peaking is approached, liquid fuel prices and price volatility will increase dramatically, and, without timely mitigation, the economic, social, and political costs will be unprecedented. Viable mitigation options exist on both the supply and demand sides, but to have substantial impact, they must be initiated more than a decade in advance of peaking.... The purpose of this analysis was to identify the critical issues surrounding the occurrence and mitigation of world oil production peaking. We simplified many of the complexities in an effort to provide a transparent analysis. Nevertheless, our study is neither simple nor brief. We recognize that when oil prices escalate dramatically, there will be demand and economic impacts that will alter our simplified assumptions. Consideration of those feedbacks will be a daunting task but one that should be undertaken. Our aim in this study is to-- • Summarize the difficulties of oil production forecasting; • Identify the fundamentals that show why world oil production peaking is such a unique challenge; • Show why mitigation will take a decade or more of intense effort; • Examine the potential economic effects of oil peaking; • Describe what might be accomplished under three example mitigation scenarios. • Stimulate serious discussion of the problem, suggest more definitive studies, and engender interest in timely action to mitigate its impacts.

Hirsch, R.L. (SAIC); Bezdek, Roger (MISI); Wendling, Robert (MISI)

2005-02-01T23:59:59.000Z

452

History and some potentials of oil shale cement  

SciTech Connect (OSTI)

The utilization of oil shale as a cement component is discussed. It was investigated in America and Europe during World War I. Additional development occurred in Western Europe, Russia, and China during the 1920s and 1930s. World War II provided further development incentives and a relatively mature technology was in place in Germany, Russia, and China prior to 1980. The utilization of oil shale in cement has taken a number of different paths. One approach has been to utilize the energy in the oil shale as the principal source for the cement plant and to use the combusted shale as a minor constituent of the plant's cement product. A second approach has been to use the combusted shale as a class C or cementitious fly-ash component in portland cement concrete. Other approaches utilizing eastern oil shale have been to use the combusted oil shale with additives as a specialty cement, or to cocombust the oil shale with coal and utilize the sulfur-rich combustion product.

Knutson, C.F.; Smith, R.P.; Russell, B.F. (Idaho National Engineering Lab., Idaho Falls, ID (USA))

1989-01-01T23:59:59.000Z

453

Carbo-metallic oil conversion  

SciTech Connect (OSTI)

This patent describes a method for catalytically cracking reduced crude oil feeds comprising Conradson carbon in the presence of a premised catalyst temperature of about 760/sup 0/C (1400/sup 0/F). The cracking is carried out to form hydrocarbon products comprising gasoline, which method comprises maintaining the functions of oil feed, Conradson carbon, hydrogen in deposited carbonaceous material, and water addition to the oil feed to be converted in accordance with the relationship of operating parameters for a catalyst to oil ratio in the range of about 4.5 to 7.5.

Myers, G.D.

1987-11-24T23:59:59.000Z

454

Maps of crude oil futures  

SciTech Connect (OSTI)

The Crude Oil Futures presentation shows their concept of the quantity of oil possibly present (the combination of conventional demonstrated reserves plus undiscovered recoverable resources) within the areas outlined. The Crude Oil Futures is not as an exploration map but as a perspective on the distribution of world oil. The occurrence of oil is, after all, a function of particular geologic factors that are not everywhere present. Furthermore, large amounts of oil can occur only where the several necessary independent variables (geologic factors) combine optimally. In the Western Hemisphere, similar minimal crude oil futures are shown for North America and South America. This similarity is a reflection not of similar geology but rather of the fact that most of the oil has already been produced from North America, whereas South America as a whole (except for Venezuela) possesses a geology less likely to produce oil. In Europe, Africa, and Asia, four regions are dominant: the Middle East, Libya, North Sea, and west Siberia. Paleogeography and source rock distribution were keys to this distribution - the Middle East and Libya reflecting the Tethyan association, and the North Sea and west Siberia benefitting from the Late Jurassic marine transgression into geographic environments where ocean circulation was restricted by tectonic events.

Masters, C.D.

1986-05-01T23:59:59.000Z

455

Oil and macroeconomy in China.  

E-Print Network [OSTI]

??This paper uses two different approaches to investigate the relationship between the oil price shock and the macroeconomy in China. The first approach is the… (more)

Hu, Lin

2008-01-01T23:59:59.000Z

456

Oil and Gas Exploration (Connecticut)  

Broader source: Energy.gov [DOE]

These regulations apply to activities conducted for the purpose of obtaining geological, geophysical, or geochemical information about oil or gas including seismic activities but excluding...

457

Solar retorting of oil shale  

DOE Patents [OSTI]

An apparatus and method for retorting oil shale using solar radiation. Oil shale is introduced into a first retorting chamber having a solar focus zone. There the oil shale is exposed to solar radiation and rapidly brought to a predetermined retorting temperature. Once the shale has reached this temperature, it is removed from the solar focus zone and transferred to a second retorting chamber where it is heated. In a second chamber, the oil shale is maintained at the retorting temperature, without direct exposure to solar radiation, until the retorting is complete.

Gregg, David W. (Morago, CA)

1983-01-01T23:59:59.000Z

458

Oil cooled, hermetic refrigerant compressor  

DOE Patents [OSTI]

A hermetic refrigerant compressor having an electric motor and compressor assembly in a hermetic shell is cooled by oil which is first cooled in an external cooler 18 and is then delivered through the shell to the top of the motor rotor 24 where most of it is flung radially outwardly within the confined space provided by the cap 50 which channels the flow of most of the oil around the top of the stator 26 and then out to a multiplicity of holes 52 to flow down to the sump and provide further cooling of the motor and compressor. Part of the oil descends internally of the motor to the annular chamber 58 to provide oil cooling of the lower part of the motor, with this oil exiting through vent hole 62 also to the sump. Suction gas with entrained oil and liquid refrigerant therein is delivered to an oil separator 68 from which the suction gas passes by a confined path in pipe 66 to the suction plenum 64 and the separated oil drops from the separator to the sump. By providing the oil cooling of the parts, the suction gas is not used for cooling purposes and accordingly increase in superheat is substantially avoided in the passage of the suction gas through the shell to the suction plenum 64.

English, William A. (Murrysville, PA); Young, Robert R. (Murrysville, PA)

1985-01-01T23:59:59.000Z

459

Oil cooled, hermetic refrigerant compressor  

DOE Patents [OSTI]

A hermetic refrigerant compressor having an electric motor and compressor assembly in a hermetic shell is cooled by oil which is first cooled in an external cooler and is then delivered through the shell to the top of the motor rotor where most of it is flung radially outwardly within the confined space provided by the cap which channels the flow of most of the oil around the top of the stator and then out to a multiplicity of holes to flow down to the sump and provide further cooling of the motor and compressor. Part of the oil descends internally of the motor to the annular chamber to provide oil cooling of the lower part of the motor, with this oil exiting through vent hole also to the sump. Suction gas with entrained oil and liquid refrigerant therein is delivered to an oil separator from which the suction gas passes by a confined path in pipe to the suction plenum and the separated oil drops from the separator to the sump. By providing the oil cooling of the parts, the suction gas is not used for cooling purposes and accordingly increase in superheat is substantially avoided in the passage of the suction gas through the shell to the suction plenum. 3 figs.

English, W.A.; Young, R.R.

1985-05-14T23:59:59.000Z

460

NASA/DOE/DOD nuclear propulsion technology planning: Summary of FY 1991 interagency panel results  

SciTech Connect (OSTI)

Interagency (NASA/DOE/DOD) technical panels worked in 1991 to evaluate critical nuclear propulsion issues, compare nuclear propulsion concepts for a manned Mars mission on a consistent basis, and to continue planning a technology development project for the Space Exploration Initiative (SEI). Panels were formed to address mission analysis, nuclear facilities, safety policy, nuclear fuels and materials, nuclear electric propulsion technology, and nuclear thermal propulsion technology. A summary of the results and recommendations of the panels is presented.

Clark, J.S.; Wickenheiser, T.J.; Doherty, M.P.; Marshall, A.; Bhattacharryya, S.K.; Warren, J.

1992-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

A discussion of the relationship between the tidal influence of the moon and the periodical flow of an oil well /  

E-Print Network [OSTI]

additional investigations may be conducted. Bartlesville, Okla. February 1919. Ill TABLE OF 00 FT EFTS. Title Page I Preface IX Table of Contents III List of Gurve Sheets IV List of Tables j The Text 1-16 History of Shriver Ho. 3 1-8 Explanation... LIST OF CURVE SHEETS Page Ho. 1 Hov. 4, 1917 to Hov. 5, 1917 17 Hov 2 Hov. 6, 1917 to Hov. 7, 1917 18 Ho. 3 Hov. 7, 1917 to Hov. 9, 1917 19 Ho. ' 4 Hov. 9, 1917 to Hov. 10, 1917 20 Ho. 5 Hov. 10, 1917 to Hov. 12, 1917 21 Ho. 6 Hov. 12, 1917...

Stillwell, Jerry Edward.

462

Optimal design of actively cooled panels for hypersonic vehicles: A combined  

E-Print Network [OSTI]

Optimal design of actively cooled panels for hypersonic vehicles: A combined materials, Irvine The design of materials for the thermo-structural protection of fully reus- able hypersonic

Ponce, V. Miguel

463

Developement of a digitally controlled low power single phase inverter for grid connected solar panel.  

E-Print Network [OSTI]

?? The work consists in developing a power conversion unit for solar panel connected to the grid. This unit will be a single phase inverter… (more)

Marguet, Raphael

2010-01-01T23:59:59.000Z

464

E-Print Network 3.0 - automobile front panel Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Search Powered by Explorit Topic List Advanced Search Sample search results for: automobile front panel Page: << < 1 2 3 4 5 > >> 1 FUTURES OF AUTOMOBILE INDUSTRY AND...

465

Intelligent Daylight Panel Control System based on Fuzzy Control for Green Buildings  

E-Print Network [OSTI]

Abstract—This paper proposes an intelligent daylight panel control system based on fuzzy control theory for green buildings. The goal of this research is to automatically modulate sunlight efficiently and to enhance the quality of interior illuminations, thus reducing the need for artificial lighting and conserving energy. Daylight panels are typically installed on the outside of windows. By applying the proposed fuzzy controller, the reflection angle of daylight panels could be adjusted and optimized so that interior illuminative quality is improved and energy-saving is achieved at the same time. Index Terms—daylight panel, intelligent control, fuzzy control. I.

T. C. Kuo; J. S. Lin; Y. Takeuchi; Y. J. Huang

466

E-Print Network 3.0 - amorphous selenium flat-panel Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

22 Licensable Technologies Summary: 12;Licensable Technologies Applications: n Solar Cells n Sensors n Flat Panels n IC Circuits... and low-performance, low-cost...

467

Estimation of Two Popular Econometric Models: Random Effects Panel Data Model and Simultaneous Equations Model  

E-Print Network [OSTI]

1994. [9] Greene, W. B. , Econometric Analysis, Pearson /and Semiparametric Panel Econometric Models: Estimation andDEPendent models. This econometric software package was

Liu, Yue

2013-01-01T23:59:59.000Z

468

amorphous silicon flat-panel: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

5 Asymmetric Electrical Properties of Half Corbino Hydrogenated Amorphous Silicon Thin-Film Transistor and Its Applications to Flat Panel Displays Materials Science...

469

Report of the Blue Ribbon Panel on the Review of the Radiation...  

Broader source: Energy.gov (indexed) [DOE]

October 11, 1995 This report summarizes the findings of the Blue Ribbon Panel's review of the RERF scientific projects and future research plans The report recommended that the...

470

Fusion Energy Advisory Committee (FEAC): Panel 7 report on Inertial Fusion Energy  

SciTech Connect (OSTI)

The charge to FEAC Panel 7 on inertial fusion energy (IFE) is encompassed in the four articles of correspondence. To briefly summarize, the scope of the panel`s review and analysis adhered to the following guidelines. (1) Consistent with previous recommendations by the Fusion Policy Advisory Committee (FPAC) and the National Academy of Science (NAS) panel on inertial fusion, the principal focus of FEAC Panel 7`s review and planning activities for next-generation experimental facilities in IFE was limited to heavy ions. (2) The panel considered the three budget cases: $5M, $10M, and $15M annual funding at constant level-of-effort (FY92 dollars), with a time horizon of about five years. (3) While limiting the analysis of next-generation experimental facilities to heavy ions, the panel assessed both the induction and rf linac approaches, and factored European plans into its considerations as well. (4) Finally, the panel identified high-priority areas in system studies and supporting IFE technologies, taking into account how IFE can benefit from related activities funded by the Office of Fusion Energy and by Defense Programs. This report presents the technical assessment, findings, and recommendations on inertial fusion energy prepared by FEAC Panel 7.

Davidson, R.; Ripin, B.; Abdou, M.; Baldwin, D.E.; Commisso, R.; Dean, S.O.; Herrmannsfeldt, W.; Lee, E.; Lindl, J.; McCrory, R. [Princeton Univ., NJ (United States)] [and others

1994-09-01T23:59:59.000Z

471

Annual Muslim Studies Program Conference Introduction, panel schedule and presenter biographical statements  

E-Print Network [OSTI]

: Essentialism and Resistance" 12:00-12:45 Lunch 1:00-2:15 Panel 3 Sylvia Chan-Malik, "Of Bikinis and Burqas

472

European Market Study for BioOil (Pyrolysis Oil)  

E-Print Network [OSTI]

European Market Study for BioOil (Pyrolysis Oil) Dec 15, 2006 Doug Bradley President Climate Change Solutions National Team Leader- IEA Bioenergy Task 40- Bio-trade 402 Third Avenue ·Ottawa, Ontario ·Canada K. Market Determining Factors 5. EU Country Perspectives 6. Potential European Markets 6.1. Pulp Mill Lime

473

Dual-circuit embossed-sheet heat-transfer panel  

DOE Patents [OSTI]

A heat transfer panel provides redundant cooling for fusion reactors or the like environment requiring low-mass construction. Redundant cooling is provided by two independent cooling circuits, each circuit consisting of a series of channels joined to inlet and outlet headers. The panel comprises a welded joinder of two full-size and two much smaller partial-size sheets. The first full-size sheet is embossed for form first portions of channels for the first and second circuits, as well as a header for the first circuit. The second full-sized sheet is then laid over and welded to the first full-size sheet. The first and second partial-size sheets are then overlaid on separate portions of the second full-sized sheet, and are welded thereto. The first and second partial-sized sheets are embossed to form inlet and outlet headers, which communicate with channels of the second circuit through apertures formed in the second full-sized sheet.

Morgan, G.D.

1982-08-23T23:59:59.000Z

474

Savings from new oil furnaces: A study conducted as part of Washington State`s Oil Help Program  

SciTech Connect (OSTI)

The Washington State Energy Office (WSEO) has been running the Oil Help program for three years. Originally operated as a loan program, Oil Help switched to rebates during the 1987 and 1988. Rebates for oil furnace replacements made up over 70 percent of rebate funds, which totaled about $1.3 million. WSEO Evaluation started research in summer of 1988, with the goal of including 100 new furnace households (with a control group of similar size) in the study. Our intention was to look at long-term oil consumption comparing each household with itself over the two periods. The final study group consists of 43 households and a control group of 87 households. The report begins with a review of related research. A discussion of research methodology, weather normalization procedure, data attrition, and important descriptive details follows. Changes in consumption for the new furnace and control groups are reported and are tested for significance. Finally, we discuss the implications of the results for the cost effectiveness of an oil furnace replacement.

Davis, R.

1989-12-01T23:59:59.000Z

475

Oil burner nozzle  

DOE Patents [OSTI]

An oil burner nozzle for use with liquid fuels and solid-containing liquid fuels. The nozzle comprises a fuel-carrying pipe, a barrel concentrically disposed about the pipe, and an outer sleeve retaining member for the barrel. An atomizing vapor passes along an axial passageway in the barrel, through a bore in the barrel and then along the outer surface of the front portion of the barrel. The atomizing vapor is directed by the outer sleeve across the path of the fuel as it emerges from the barrel. The fuel is atomized and may then be ignited.

Wright, Donald G. (Rockville Center, NY)

1982-01-01T23:59:59.000Z

476

Residential heating oil price  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromisingStories »Submitter A B CAdministrationheating oil price

477

Residential heating oil price  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromisingStories »Submitter A B CAdministrationheating oil

478

fuel_oil.pdf  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781Title: Telephone:short version)ec 1827 TableB (11-19-10)Fuel Oil

479

Crude Oil Domestic Production  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781Title: Telephone:shortOilCompanyexcluding taxes)Countries0 0 0 0

480

Crude Oil Production  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781Title: Telephone:shortOilCompanyexcluding taxes)Countries08,909

Note: This page contains sample records for the topic "oil panel discussion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Residual Fuel Oil  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in NonproducingAdditions to Capacity on CokersA2. ForJanuary 2013 (Thousand

482

Oil resources: the key to prosperity or to poverty? : Influence of oil price shocks on spending of oil revenues.  

E-Print Network [OSTI]

??Abundant natural resources, in particular oil, play an important role in the economics of many countries. The oil price shocks that have been happening continuously… (more)

Selivanova, Olga

2008-01-01T23:59:59.000Z

483

WASTEWATER TREATMENT IN THE OIL SHALE INDUSTRY  

E-Print Network [OSTI]

III, "Method of Breaking Shale Oil-Water Emulsion," U. S.and Biological Treatment of Shale Oil Retort Water, DraftPA (1979). H. H. Peters, Shale Oil Waste Water Recovery by

Fox, J.P.

2010-01-01T23:59:59.000Z

484

CORROSION OF METALS IN OIL SHALE ENVIRONMENTS  

E-Print Network [OSTI]

temperature, type of shale and oil content of shale iscontent of the shale, and shale oil content of the rock cantemperatures. Lean and Rich Shale Oil shales vary in their

Bellman Jr., R.

2012-01-01T23:59:59.000Z

485

Membrane degumming of crude vegetable oil  

E-Print Network [OSTI]

Crude vegetable oils contain various minor substances like phospholipids, coloring pigments, and free fatty acids (FFA) that may affect quality of the oil. Reduction of energy costs and waste disposal are major concerns for many oil refiners who...

Lin, Lan

1997-01-01T23:59:59.000Z

486

CORROSION OF METALS IN OIL SHALE ENVIRONMENTS  

E-Print Network [OSTI]

CORROSION OF METALS IN OIL SHALE ENVIRONMENTS A. Levy and R.of Metals in In-Situ Oil Shale Retorts," NACE Corrosion 80,Corrosion of Oil Shale Retort Component Materials," LBL-

Bellman Jr., R.

2012-01-01T23:59:59.000Z

487

WASTEWATER TREATMENT IN THE OIL SHALE INDUSTRY  

E-Print Network [OSTI]

III, "Method of Breaking Shale Oil-Water Emulsion," U. S.Waters from Green River Oil Shale," Chem. and Ind. , 1. ,Effluents from In-Situ oil Shale Processing," in Proceedings

Fox, J.P.

2010-01-01T23:59:59.000Z

488

CORROSION OF METALS IN OIL SHALE ENVIRONMENTS  

E-Print Network [OSTI]

Elevated Temperature Corrosion of Oil Shale Retort Componentin In-Situ Oil Shale Retorts," NACE Corrosion 80, Paper No.6-10, 1981 CORROSION OF METALS IN OIL SHALE ENVIRONMENTS A.

Bellman Jr., R.

2012-01-01T23:59:59.000Z

489

WASTEWATER TREATMENT IN THE OIL SHALE INDUSTRY  

E-Print Network [OSTI]

is in intimate contact with oil and shale during In in-situin contact with the oil and shale. These methods and othersWaters from Green River Oil Shale," Chem. and Ind. , 1. ,

Fox, J.P.

2010-01-01T23:59:59.000Z

490

WASTEWATER TREATMENT IN THE OIL SHALE INDUSTRY  

E-Print Network [OSTI]

Waters from Green River Oil Shale," Chem. and Ind. , 1. ,Effluents from In-Situ oil Shale Processing," in Proceedingsin the Treatment of Oil Shale Retort Waters," in Proceedings

Fox, J.P.

2010-01-01T23:59:59.000Z

491

CORROSION OF METALS IN OIL SHALE ENVIRONMENTS  

E-Print Network [OSTI]

CORROSION OF METALS IN OIL SHALE ENVIRONMENTS A. Levy and R.of Metals in In-Situ Oil Shale Retorts," NACE Corrosion 80,Elevated Temperature Corrosion of Oil Shale Retort Component

Bellman Jr., R.

2012-01-01T23:59:59.000Z

492

Crude oil and crude oil derivatives transactions by oil and gas producers.  

E-Print Network [OSTI]

??This study attempts to resolve two important issues. First, it investigates the diversification benefit of crude oil for equities. Second, it examines whether or not… (more)

Xu, He

2007-01-01T23:59:59.000Z

493

www.fightbac.o anola oil is  

E-Print Network [OSTI]

Ca co Th Ca "Canola" c which is Addition Ca he Ca in Th ca Ca m C know? anola oil is ooking oils. he average anola oil is comes fro s another nal Inform anola oil is eart healthy anola oil is n the world. he part of th anola meal anola oil ca many crop va ano the lowest . canola see a good sou m

494

Iran seeking help in regaining prerevolution oil and gas flow  

SciTech Connect (OSTI)

This paper reviews the goals of the Iranian oil and gas industry to rebuild their oil and gas production facilities by using foreign investment. It discusses the historical consequences of war in the region to diminish the production and postpone the recovery of natural gas which is currently flared. It describes the major projects Iran hopes to develop through international partnerships and includes field development, pipeline construction, gas reinjection, gas treatment facilities, and new offshore operation. The paper also reviews the US policy on Iran and its attempt to apply sanctions towards this country.

Tippee, B.

1996-02-19T23:59:59.000Z

495

Hydrocarbon composition of crude oil from Lam Bank  

SciTech Connect (OSTI)

The authors discuss the crude oil from a new offshore field called the Lam Bank in the Caspian Sea. A segregated commercial crude was distilled and the distillation data is shown. In order to determine the content of n-paraffins, the naphthenic-paraffinic part of the narrow cuts was subjected to adsorptive separation on CaA zeolite. Owing to the high contents of naphthenic and isoparaffinic hydrocarbons and the low content of aromatic hydrocarbons in the distillate part, this crude can be used to produce high-quality fuels and oils by the use of the dewaxing processes.

Samedova, F.I.; Agaeva, R.M.; Alieva, F.Z.; Valiev, M.A.

1987-07-01T23:59:59.000Z

496

Process oil manufacturing process  

SciTech Connect (OSTI)

A method is described for producing a naphthenic process oil having reduced sulfur, nitrogen and polynuclear aromatics contents from a naphthenic feed containing same and having an atmospheric boiling range of about 650/sup 0/ to about 1200/sup 0/F. comprising: A. passing the feed into a first hydrotreating stage having a hydrotreating catalyst therein, the stage maintained at a temperature of about 600/sup 0/ to about 750/sup 0/F. and at a hydrogen partial pressure of about 400 to about 1500 psig, to convert at least a portion of the sulfur to hydrogen sulfide and the nitrogen to ammonia; B. passing the hydrotreated feed from the first hydrotreating stage in an intermediate stripping stage wherein hydrogen sulfide, ammonia, or both is removed; C. passing the hydrotreated feed from the intermediate stage into a second hydrotreating stage having therein a hydrotreating catalyst selected from the group consisting of nickel-molybdenum, cobalt-molybdenum, nickel-tungsten and mixtures thereof, the second hydrotreating stage maintained at a temperature lower than that of the first hydrotreating stage and at a hydrogen partial pressure ranging between about 400 and about 1,500 psig; D. monitoring the polynuclear aromatics content, the degree of saturation, or both of the product exiting the second hydrotreating stage; and, E. adjusting the temperature in the second hydrotreating stage to keep the polynuclear aromatics content, the degree of saturation, or both below a limit suitable for process oil.

Corman, B.G.; Korbach, P.F.; Webber, K.M.

1989-01-31T23:59:59.000Z

497

Energy Secretary Bodman Travels to Moscow, Baku, Kiev to Discuss...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

WASHINGTON, DC -- Secretary of Energy Samuel Bodman next week will travel to Moscow, Russia; Baku, Azerbaijan; and Kiev, Ukraine, where he will hold discussions with senior...

498

Scientists discuss progress toward magnetic fusion energy at...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Scientists discuss progress toward magnetic fusion energy at 2013 AAAS annual meeting February 21, 2013 Tweet Widget Google Plus One Share on Facebook Scientists participating in...

499

TODAY: Senior Obama Administration Officials to Discuss Progress...  

Energy Savers [EERE]

A123 Systems. WHAT: Conference call to discuss progress of Recovery Act advanced battery and electric drive grants WHO: Chief Economist to the Vice President Jared...

500

US, UK, France Discuss Stockpile Stewardship, Arms Control and...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

France Discuss Stockpile Stewardship, Arms Control and Nonproliferation and Visit the Nevada National Security Site | National Nuclear Security Administration Facebook Twitter...