Powered by Deep Web Technologies
Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

An examination of factors affecting high occupancy/toll lane demand  

E-Print Network [OSTI]

In recent years, high occupancy/toll (HOT) lanes have gained increasing recognition as a potential method of managing traffic congestion. HOT lanes combine pricing and vehicle occupancy restrictions to optimize the demand for high occupancy vehicle...

Appiah, Justice

2004-11-15T23:59:59.000Z

2

A Mathematical Model for Evaluating the Conversion of High Occupancy Vehicle Lane to High Occupancy/ Toll Lane  

E-Print Network [OSTI]

over three years. The capital cost estimate from MTC was putprocess (MTC estimates the capital cost of putting an HOT

Naga, Raghavender P

2007-01-01T23:59:59.000Z

3

Linear Tolls Suce: New bounds and algorithms for tolls  

E-Print Network [OSTI]

; 1] ordered by their increasing willingness to pay tolls to reduce latency | their valuation of time. Cole, et al. give an algorithm that computes optimal tolls for a bounded number of agent valuations with optimal tolls is independent of the distribution of valuations of time of the users. In particular

Fleischer, Lisa K.

4

Tolling at a Frontier Tolling at a Frontier: A Game Theoretic Analysis  

E-Print Network [OSTI]

Tolling at a Frontier 1 Tolling at a Frontier: A Game Theoretic Analysis by David Levinson DRAFT July 15, 1998 Abstract: Frontiers provide an opportunity for one jurisdiction to remedy inequities (and collection costs is stable. Published as: Levinson, David (1999) Tolling at a Frontier: A Game Theoretic

Levinson, David M.

5

Journal of Transportation Engineering Modelling Automobile Driver's Toll-Lane Choice Behaviour at a Toll Plaza  

E-Print Network [OSTI]

Journal of Transportation Engineering Modelling Automobile Driver's Toll-Lane Choice Behaviour at a Toll Plaza --Manuscript Draft-- Manuscript Number: TEENG-1181R3 Full Title: Modelling Automobile Driver to develop a random utility based discrete multinomial choice model for the behaviour of automobile drivers

Kundu, Debasis

6

PRICING ENERGY DERIVATIVES BY LINEAR PROGRAMMING: TOLLING AGREEMENT CONTRACTS  

E-Print Network [OSTI]

PRICING ENERGY DERIVATIVES BY LINEAR PROGRAMMING: TOLLING AGREEMENT CONTRACTS Valeriy Ryabchenko for pricing energy derivatives known as tolling agreement contracts. The pricing problem is reduced energy derivatives. The problem of pricing such contracts falls into the class of multiple optimal

Uryasev, Stanislav

7

HOT TOPICS: Bridge suicides (http://www.marinij.com/goldengatebridge/ci_25220172/record-number-golden-gate-bridge-suicides-recorded-2013) #MarinDrought (http://www.marinij.com/marinnews/ci_24975029/readers-share-water-saving-ideas-marindroughtt)  

E-Print Network [OSTI]

HOT TOPICS: Bridge suicides (http://www.marinij.com/goldengatebridge/ci_25220172/record-number-golden-gate-bridge://www.marinij.com/goldengatebridge/ci_25217201/golden-gate-bridge-toll-could-increase-by-1) Data center (http://www.marinij.com/data) Traffic://www.marinij.com/marinnews/ci_25202779/marin-robbery-suspect-loses-bid-stop-ij-from) Bridge toll hike (http

California at Berkeley, University of

8

OCCUPATIONAL SAFETY and HEALTH  

E-Print Network [OSTI]

MARYLAND OCCUPATIONAL SAFETY and HEALTH ACT safety and health protection on the job STATE OCCUPATIONAL SAFETY AND HEALTH STANDARDS, AND OTHER APPLICABLE REGULATIONS MAY BE OBTAINED FROM Complaints about State Program administration may be made to Regional Administrator, Occupational Safety

Weaver, Harold A. "Hal"

9

OCCUPATIONAL HEALTH AND SAFETY  

E-Print Network [OSTI]

OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM Department of Occupational Health and Safety Revised December 2009 #12;Occupational Health and Safety (OHS) Management System 1. Introduction.............................................................................................................. 3 2.2 Management of Health and Safety

10

Occupational Health Nurse  

Broader source: Energy.gov [DOE]

The Occupational Health Nurse position is located in the Talent Sustainment group within the Human Capital Management (HCM) organization. The Talent Sustainment organization ensures that effective...

11

Hot Canyon  

ScienceCinema (OSTI)

This historical film footage, originally produced in the early 1950s as part of a series by WOI-TV, shows atomic research at Ames Laboratory. The work was conducted in a special area of the Laboratory known as the "Hot Canyon."

None

2013-03-01T23:59:59.000Z

12

The Application and Energy Savings Potential of Occupancy Counters/Transmitters in Office Buildings  

E-Print Network [OSTI]

because the occupancy is below the design occupancy. In hot and humid climates, such as the Gulf Southwest, a considerable portion of the cooling energy in a commercial building is expended cooling and dehumidifying the air needed to maintain fresh air...

Medlin, J. W.

1987-01-01T23:59:59.000Z

13

The impact of incentives on the use of toll roads by trucks  

E-Print Network [OSTI]

. Unfortunately, the low profit margin in the trucking industry and the relatively high tolls truckers pay leads to their reluctance to use toll facilities. Incentives for truck use of a toll road, State Highway 130 (SH 130) near Austin, Texas, were analyzed...

Zhou, Lin

2010-07-14T23:59:59.000Z

14

Rehabilitation Services Sample Occupations  

E-Print Network [OSTI]

/Industries Correction Agencies Drug Treatment Centers Addiction Counselor Advocacy Occupations Art Therapist BehavioralRehabilitation Services Sample Occupations Sample Work Settings Child & Day Care Centers Clinics................................ IIB 29-1000 E4 Careers in Counseling and Human Services .........IIB 21-1010 C7 Careers in Health Care

Ronquist, Fredrik

15

J Occup Health 2003; 45: 382391 Occupational Health  

E-Print Network [OSTI]

J Occup Health 2003; 45: 382­391 Journal of Occupational Health Relationships of Job and Some National Institute for Health and Medical Research (Inserm), U 420, IFR25-RFRH, Réseau Fédératif de disorders. (J Occup Health 2003; 45: 382­391) Key words: Occupational injury, Job, Sex, Age, Overweight

Boyer, Edmond

16

Potential shift from transit to single occupancy vehicle due to adaptation of a high occupancy vehicle lane to a high occupancy toll lane  

E-Print Network [OSTI]

distributed to park-and-ride bus passengers on the Katy Freeway and Northwest Freeway corridors in Houston. Passengers responses to questions regarding their trip characteristics, their socioeconomic characteristics, and stated preference scenarios were used...

Chum, Geoffrey Linus

2009-05-15T23:59:59.000Z

17

Occupational Health Services - HPMC Occupational Health Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the ContributionsArmsSpeedingSpeedingUnderOccupational Health Services Part IIIIServices

18

E-Print Network 3.0 - automated toll collection Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Storage, Conversion and Utilization 2 Technical Report Documentation Page 1. Report No. Summary: Tag is an electronic toll collection (ETC) device that can be used to pay the...

19

The Private Provision of Frontier Infrastructure: Toll Roads in California, 1850-1902  

E-Print Network [OSTI]

and Gold Run (1867), Weaverville and Minersville (1863), andwho controlled the Weaverville & Shasta Wagon Road and thea large interest in the Weaverville & Minersville Toll Road.

Klein, Daniel B.; Yin, Chi

1994-01-01T23:59:59.000Z

20

Occupational Health and Safety Manual  

E-Print Network [OSTI]

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Addressing Health and Safety Concerns and Resolution of Work RefusalsOccupational Health and Safety Manual #12;1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 York University Occupational Health and Safety Policy and Programs

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Energy Employees Occupational Illness Compensation Program Act...  

Energy Savers [EERE]

Tracking Database, INL Energy Employees' Occupational Illness Compensation Program LM Records Handling System (LMRHS01) - Energy Employees Occupational Illness Compensation...

22

Enenrgy Employees Occupational Illness Compensation Program Act...  

Energy Savers [EERE]

Program Act (EEOICPA) Energy Employees' Occupational Illness Compensation Program Act (EEOICPA) Tracking Database, INL Energy Employees' Occupational Illness Compensation Program...

23

Energy Employees' Occupational Illness Compensation Program Act...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Employees' Occupational Illness Compensation Program Act (EEOICPA) Tracking Database, INL Energy Employees' Occupational Illness Compensation Program Energy Employees'...

24

Pricing and Hedging Electricity Supply Contracts: a Case with Tolling Agreements  

E-Print Network [OSTI]

Pricing and Hedging Electricity Supply Contracts: a Case with Tolling Agreements Shi-Jie Deng Email Customized electric power contracts catering to specific business and risk management needs have gained increasing popularity among large energy firms in the restructured electricity in- dustry. A tolling

25

Occupational Injury & Illness System (01&15) PIA, Idaho National...  

Office of Environmental Management (EM)

Employees' Occupational Illness Compensation Program Act (EEOICPA) Tracking Database, INL Energy Employees' Occupational Illness Compensation Program Occupational Medicine -...

26

Pantex Occupational Health System (OHS), National Nuclear Security...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Employees' Occupational Illness Compensation Program Act (EEOICPA) Tracking Database, INL Energy Employees' Occupational Illness Compensation Program Occupational Medical...

27

Occupational Medicine Variance Request  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the ContributionsArmsSpeedingSpeedingUnderOccupational Health Services PartDepartment

28

Section 5 -Termination of Occupancy A. Involuntary Termination of Occupancy  

E-Print Network [OSTI]

Section 5 - Termination of Occupancy A. Involuntary Termination of Occupancy 1. Housing and Dining number of credits at UAA as stipulated in Section 2 - Eligibility, and for non-payment of Housing charges. 2. The University may terminate this agreement without cause with ten days written notice. 3

Pantaleone, Jim

29

Tool for Generating Realistic Residential Hot Water Event Schedules: Preprint  

SciTech Connect (OSTI)

The installed energy savings for advanced residential hot water systems can depend greatly on detailed occupant use patterns. Quantifying these patterns is essential for analyzing measures such as tankless water heaters, solar hot water systems with demand-side heat exchangers, distribution system improvements, and recirculation loops. This paper describes the development of an advanced spreadsheet tool that can generate a series of year-long hot water event schedules consistent with realistic probability distributions of start time, duration and flow rate variability, clustering, fixture assignment, vacation periods, and seasonality. This paper also presents the application of the hot water event schedules in the context of an integral-collector-storage solar water heating system in a moderate climate.

Hendron, B.; Burch, J.; Barker, G.

2010-08-01T23:59:59.000Z

30

ORO Energy Employees Occupational Illness Compensation Program...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

ORO Energy Employees Occupational Illness Compensation Program(EEOICPA)PIA, Oak Ridge Operations Office ORO Energy Employees Occupational Illness Compensation Program(EEOICPA)PIA,...

31

CRAD, Occupational Safety & Health - Idaho Accelerated Retrieval...  

Broader source: Energy.gov (indexed) [DOE]

Occupational Safety & Health - Idaho Accelerated Retrieval Project Phase II CRAD, Occupational Safety & Health - Idaho Accelerated Retrieval Project Phase II February 2006 A...

32

An analysis of the current investment trend in the U.S. toll road sector  

E-Print Network [OSTI]

In recent years, long term concessions through public-private partnerships (PPP's) in the US toll road sector have emerged and are expected to become a phenomenon in the near future. Up until now, only two large scale ...

Zhang, Xin, S.M. Massachusetts Institute of Technology

2008-01-01T23:59:59.000Z

33

Toll road public-private partnerships in Malaysia : using the CLIOS process for policy improvements  

E-Print Network [OSTI]

Malaysia has relied on private sector provision of toll roads for over twenty years using public- private partnerships (PPPs). While the program has been successful in providing close to 1,800 kilometers of highway in that ...

Ward, John L., 1977-

2005-01-01T23:59:59.000Z

34

Team #32 Page 1 of 19 Modeling Toll Plaza Behavior Using Queuing Theory  

E-Print Network [OSTI]

.2 Environmental Impact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4.3 Traffic Capacity and Graphs 18 #12;Team #32 Page 3 of 19 1 Introduction Toll financing has been used throughout the history

Morrow, James A.

35

FAQS Reference Guide Occupational Safety  

Broader source: Energy.gov [DOE]

This reference guide has been developed to address the competency statements in the July 2011 version of DOE-STD-1160-2011, Occupational Safety Functional Area Qualification Standard.

36

Environmental Occupational Health Protection Laws  

E-Print Network [OSTI]

The manufacturing, processing, and use of chemicals and materials in industrial, workplaces are often accompanied by environmental, health, and safety hazards and risks. Occupational and environmental factors cause or ...

Ashford, Nicholas

2008-01-01T23:59:59.000Z

37

Environmental Studies & Ecology Sample Occupations  

E-Print Network [OSTI]

Relations Specialist Recreation Leader Renewable Energy Consultant Safety Inspector Sales Representative. Programs Farms/Ranches FEDERAL AGENCIES Department of Defense (U.S. Army Corps of Engineers) Environmental Conservationist Consultant Earth Scientist Ecologist Economic Analyst Energy Occupations Entomologist

Ronquist, Fredrik

38

Occupational Medicine Workshops and Webinars  

Broader source: Energy.gov [DOE]

The DOE Annual Occupational Medicine Workshop & Webinar (OMWW) is a valuable training opportunity established by the Office of Health, Safety, and Security in support of hundreds of medical and allied health professionals located at over four dozen locations across the Department. Their vital work in the field of Occupational Medicine encompasses medical qualification examinations, injury and illness management, disability management, workers compensation, and much more.

39

Reactor hot spot analysis  

SciTech Connect (OSTI)

The principle methods for performing reactor hot spot analysis are reviewed and examined for potential use in the Applied Physics Division. The semistatistical horizontal method is recommended for future work and is now available as an option in the SE2-ANL core thermal hydraulic code. The semistatistical horizontal method is applied to a small LMR to illustrate the calculation of cladding midwall and fuel centerline hot spot temperatures. The example includes a listing of uncertainties, estimates for their magnitudes, computation of hot spot subfactor values and calculation of two sigma temperatures. A review of the uncertainties that affect liquid metal fast reactors is also presented. It was found that hot spot subfactor magnitudes are strongly dependent on the reactor design and therefore reactor specific details must be carefully studied. 13 refs., 1 fig., 5 tabs.

Vilim, R.B.

1985-08-01T23:59:59.000Z

40

IR Hot Wave  

SciTech Connect (OSTI)

The IR Hot Wave{trademark} furnace is a breakthrough heat treatment system for manufacturing metal components. Near-infrared (IR) radiant energy combines with IR convective heating for heat treating. Heat treatment is an essential process in the manufacture of most components. The controlled heating and cooling of a metal or metal alloy alters its physical, mechanical, and sometimes chemical properties without changing the object's shape. The IR Hot Wave{trademark} furnace offers the simplest, quickest, most efficient, and cost-effective heat treatment option for metals and metal alloys. Compared with other heat treatment alternatives, the IR Hot Wave{trademark} system: (1) is 3 to 15 times faster; (2) is 2 to 3 times more energy efficient; (3) is 20% to 50% more cost-effective; (4) has a {+-}1 C thermal profile compared to a {+-}10 C thermal profile for conventional gas furnaces; and (5) has a 25% to 50% smaller footprint.

Graham, T. B.

2010-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Skills and Occupational Needs in Green Building  

E-Print Network [OSTI]

European Union Skills and Occupational Needs in Green Building 2011 Jobs Jobs Transition Just Department #12;Skills and Occupational Needs in Green Building 2011 #12;#12;InternatIonal labour offIce · Geneva european commIssIon Skills and Occupational Needs in Green Building 2011 #12;photocomposed

42

Occupational Medical Surveillance System (OMSS) PIA, Idaho National...  

Office of Environmental Management (EM)

National Laboratory Energy Employees' Occupational Illness Compensation Program Act (EEOICPA) Tracking Database, INL Energy Employees' Occupational Illness Compensation Program...

43

A model for optimizing electronic toll collection systems David Levinson *, Elva Chang  

E-Print Network [OSTI]

off. The Golden Gate Bridge in * Corresponding author. Tel.: +1-612-625-6354. E-mail address: levin031 Bridge, and recommendations are made concerning the number of dedicated ETC lanes and the appro- priate electronic toll collection (ETC) systems enable bridge, tunnel, and turnpike operators to reduce both staff

Levinson, David M.

44

The Arizona Poison and Drug Information Center's toll free line is  

E-Print Network [OSTI]

· Poisonous plants · Food poisoning · Pesticide information · Poisonings of animals · Workplace exposuresThe Arizona Poison and Drug Information Center's toll free line is always open. Call us if: · You think someone has been poisoned. · You have questions about any type of poison. · You want information

Arizona, University of

45

microform I -I lJO&521-0600 toll-hee  

E-Print Network [OSTI]

-343-5299 toll-hee from Canada Copiesof articles from this publicationare now available from UMI Article clients is granted by Kluwer Academic Publishers for users registered with the Copyright Clearance Center:Permission to photocopy must be obtained from the copyright owner. Please apply to Kluwer Academic Publishers. P.O. Box 17

Fitelson, Branden

46

ANALYSIS OF THE REQUIREMENTS FOR HUMAN TOLL-LIKE RECEPTOR 3 DOMINANT NEGATIVITY AND SIGNAL TRANSDUCTION  

E-Print Network [OSTI]

of dominant negative inhibition of TLR3N-CT is comparable to that of TLR3 ?Toll interleukin-1 receptor (TIR), the previously established standard for dominant negativity. Tyrosine mutants, such as Y759F, have been shown to dramatically reduce TLR3 signal...

Hickey, Matthew

2009-06-09T23:59:59.000Z

47

Green Systems Solar Hot Water  

E-Print Network [OSTI]

Green Systems Solar Hot Water Heating the Building Co-generation: Heat Recovery System: Solar panels not enough Generates heat energy Captures heat from generator and transfers it to water Stores Thermal Panels (Trex enclosure) Hot Water Storage Tank (TS-5; basement) Hot Water Heaters (HW-1

Schladow, S. Geoffrey

48

Analysis of road pricing, metering and the priority treatment of high occupancy vehicles using system dynamics. Master's thesis  

SciTech Connect (OSTI)

Transportation Systems Management (TSM) employs various techniques such as road pricing, metering and the priority treatment of high occupancy vehicles (HOVs) in an effort to make more efficient use of existing transportation facilities. Efficiency is improved in terms of moving more people through the facility while simultaneously reducing the number of vehicles using the facility. This report uses a hypothetical toll facility and examines four computer modeling approaches to determine which of the approaches are valid in terms of predicting the behavior of trip makers seeking to use the facility in response to various combinations of TSM techniques. Once an approach has been determined to be valid, seven different combination of TSM techniques, or strategies, are compared to a base strategy to determine what strategy or strategies are most affective in achieving the goals of TSM.

Castillo, W.

1992-01-01T23:59:59.000Z

49

Occupational Medicine | The Ames Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratorySpeeding access toSpeedingScientificASecurityObservationOccupant

50

Deputy Secretary Memo Regarding Energy Employees Occupational...  

Energy Savers [EERE]

the program claimants to make sure that all available worker and DOE facility records and data are provided to DOL, the National Institute for Occupational Safety and Health...

51

Occupant Emergency Plans | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Emergency Plans Occupant Emergency Plans On this page is the collection of Emergency Procedures documents for the Department of Energy, Headquarters buildings, in the Washington,...

52

Annual DOE Occupational Radiation Exposure | 1974 Report  

Broader source: Energy.gov [DOE]

The Seventh Annual Report of Radiation Exposures for AEC & AEC Contractor Employees analyzes occupational radiation exposures at the Atomic Energy Commission (AEC) and its contractor employees during 1974.

53

The 1986 residential occupant survey  

SciTech Connect (OSTI)

In 1986, Pacific Northwest Laboratory developed the Residential Occupant Survey-Spring '86, which was implemented. The overall purpose of the study was to collect demographic, attitudinal, and behavioral data related to the use and conservation of electricity in dwellings participating in the Bonneville Power Administration's End-Use Load and Conservation Assessment Program (ELCAP). Information was collected on the respondents' perceptions of the energy efficiency of their dwelling, temperature the dwelling was kept when people were at home and awake during the last heating season, which rooms, if any, were not heated during the last heating season, number of times the dwelling was unoccupied for at least one week, number of times pets were let out of the dwelling per day, attitudes toward energy use and conservation and several socio-demographic variables such as age, sex, and total household income. The results of the data analyses showed age to be an important factor for reported indoor temperature and perceived energy efficiency of the dwelling. The results also showed that almost 60% of the ELCAP occupants do not heat one or more rooms during the heating season, and almost 45% of the ELCAP dwellings were unoccupied for at least one week during the reporting period. In terms of the reported allocation of household income for household energy expenses, the results showed that the reported dollar amount spent for the expenses remained relatively constant over income levels.

Ivey, D.L.; Alley, P.K.

1987-04-01T23:59:59.000Z

54

Pilgrim Hot Springs, Alaska  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Careerlumens_placard-green.epsEnergy1.pdfMarket | DepartmentPhotoelectrochemicalInan<aPilgrim Hot

55

Hot air drum evaporator  

DOE Patents [OSTI]

An evaporation system for aqueous radioactive waste uses standard 30 and 55 gallon drums. Waste solutions form cascading water sprays as they pass over a number of trays arranged in a vertical stack within a drum. Hot dry air is circulated radially of the drum through the water sprays thereby removing water vapor. The system is encased in concrete to prevent exposure to radioactivity. The use of standard 30 and 55 gallon drums permits an inexpensive compact modular design that is readily disposable, thus eliminating maintenance and radiation build-up problems encountered with conventional evaporation systems.

Black, Roger L. (Idaho Falls, ID)

1981-01-01T23:59:59.000Z

56

Hot Plate Station  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFun withconfinement plasmas inPortalAll NERSC userNewhighDiff- EnergyHot

57

Idaho_HotSprings  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFun withconfinementEtching. | EMSLtheIndustryMitch204 Latitude: N.MikePatHot

58

Geothermal: Hot Documents Search  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFun with Big Sky Learning FunNeuTel2011Programmatic ReportsContact UsHelpHot

59

HBLED Hot Testing  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensional Subject:Ground SourceHBLED Hot Testing 2014 Building Technologies

60

Integrated Daylight Harvesting and Occupancy Detection Using Digital Imaging  

E-Print Network [OSTI]

Integrated Daylight Harvesting and Occupancy Detection Using Digital Imaging Abhijit Sarkar dynamic range CMOS video camera to integrate daylight harvesting and occupancy sensing functionalities by these sensors. The prototype involves three algorithms, daylight estimation, occupancy detection and lighting

Salvaggio, Carl

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

aggregated occupational cohorts: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

on Occupation Caf Wednesday,November 2,2011 from 7:30 to 9:30 pm Handy, Todd C. 33 Newsletter of The Department of Occupational Science & Occupational Therapy Engineering...

62

Occupancy change detection system and method  

SciTech Connect (OSTI)

A robot platform includes perceptors, locomotors, and a system controller. The system controller executes instructions for producing an occupancy grid map of an environment around the robot, scanning the environment to generate a current obstacle map relative to a current robot position, and converting the current obstacle map to a current occupancy grid map. The instructions also include processing each grid cell in the occupancy grid map. Within the processing of each grid cell, the instructions include comparing each grid cell in the occupancy grid map to a corresponding grid cell in the current occupancy grid map. For grid cells with a difference, the instructions include defining a change vector for each changed grid cell, wherein the change vector includes a direction from the robot to the changed grid cell and a range from the robot to the changed grid cell.

Bruemmer, David J. (Idaho Falls, ID) [Idaho Falls, ID; Few, Douglas A. (Idaho Falls, ID) [Idaho Falls, ID

2009-09-01T23:59:59.000Z

63

Pamphlet, A Basic Overview of Occupational Radiation Exposure...  

Broader source: Energy.gov (indexed) [DOE]

Pamphlet, A Basic Overview of Occupational Radiation Exposure Monitoring, Analysis & Reporting Pamphlet, A Basic Overview of Occupational Radiation Exposure Monitoring, Analysis &...

64

A Basic Overview of the Energy Employees Occupational Illness...  

Energy Savers [EERE]

Institute for Occupational Safety and Health (NIOSH) and the Advisory Board on Radiation and Worker Health (Advisory Board) are responsible for conducting occupational...

65

Federal Employee Occupational Safety And Health (FEOSH) Program...  

Energy Savers [EERE]

Federal Employee Occupational Safety And Health (FEOSH) Program Overview Federal Employee Occupational Safety And Health (FEOSH) Program Overview Congress established Public Law...

66

Hawaii Department of Labor and Industrial Relations Occupational...  

Open Energy Info (EERE)

and Industrial Relations Occupational Safety and Health Division Jump to: navigation, search Name: Hawaii Department of Labor and Industrial Relations Occupational Safety and...

67

LM Records Handling System (LMRHS01) - Energy Employees Occupational...  

Broader source: Energy.gov (indexed) [DOE]

Employees Occupational Illness Compensation Program Act, Office of Legacy Management LM Records Handling System (LMRHS01) - Energy Employees Occupational Illness Compensation...

68

A Review of High Occupancy Vehicle (HOV) Lane Performance and...  

Open Energy Info (EERE)

Occupancy Vehicle (HOV) Lane Performance and Policy Options in the United States: Final Report Jump to: navigation, search Tool Summary LAUNCH TOOL Name: A Review of High Occupancy...

69

DOE Issues Request for Proposals for Hanford Site Occupational...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Issues Request for Proposals for Hanford Site Occupational Medical Services DOE Issues Request for Proposals for Hanford Site Occupational Medical Services November 14, 2011 -...

70

Hot hollow cathode gun assembly  

DOE Patents [OSTI]

A hot hollow cathode deposition gun assembly includes a hollow body having a cylindrical outer surface and an end plate for holding an adjustable heat sink, the hot hollow cathode gun, two magnets for steering the plasma from the gun into a crucible on the heat sink, and a shutter for selectively covering and uncovering the crucible.

Zeren, J.D.

1983-11-22T23:59:59.000Z

72

Arnold Schwarzenegger WATER HEATERS AND HOT WATER  

E-Print Network [OSTI]

Arnold Schwarzenegger Governor WATER HEATERS AND HOT WATER DISTRIBUTION SYSTEMS: Lutz J.D. (Lawrence Berkeley National Laboratory). 2008. Water Heaters and Hot Water Distribution

73

OCCUPATIONAL SAFETY AND ENVIRONMENTAL HEALTH GUIDELINE  

E-Print Network [OSTI]

OCCUPATIONAL SAFETY AND ENVIRONMENTAL HEALTH GUIDELINE Subject: Training for the Safe prior to shipping hazardous chemicals. REFERENCE REGULATIONS: Federal Hazardous Materials Transportation disease in otherwise healthy humans or animals. Infectious substances meeting these criteria which cause

Shyy, Wei

74

Annual DOE Occupational Radiation Exposure | 1980 Report  

Broader source: Energy.gov [DOE]

The Thirteenth Annual Report of Radiation Exposures for DOE & DOE Contractor Employees analyzes occupational radiation exposures at the U.S. Department of Energy (DOE) and its contractor employees during 1980.

75

Annual DOE Occupational Radiation Exposure | 1983 Report  

Broader source: Energy.gov [DOE]

The Sixteenth Annual Report of Radiation Exposures for DOE & DOE Contractor Employees analyzes occupational radiation exposures at the U.S. Department of Energy (DOE) and its contractor employees during 1983.

76

Annual DOE Occupational Radiation Exposure | 1986 Report  

Broader source: Energy.gov [DOE]

The Nineteenth Annual Report of Radiation Exposures for DOE & DOE Contractor Employees analyzes occupational radiation exposures at the U.S. Department of Energy (DOE) and its contractor employees during 1986.

77

Annual DOE Occupational Radiation Exposure | 1982 Report  

Broader source: Energy.gov [DOE]

The Fifteenth Annual Report of Radiation Exposures for DOE & DOE Contractor Employees analyzes occupational radiation exposures at the U.S. Department of Energy (DOE) and its contractor employees during 1982.

78

Annual DOE Occupational Radiation Exposure | 1979 Report  

Broader source: Energy.gov [DOE]

The Twelfth Annual Report of Radiation Exposures for DOE & DOE Contractor Employees analyzes occupational radiation exposures at the U.S. Department of Energy (DOE) and its contractor employees during 1979.

79

Annual DOE Occupational Radiation Exposure | 1985 Report  

Broader source: Energy.gov [DOE]

The Eighteenth Annual Report of Radiation Exposures for DOE & DOE Contractor Employees analyzes occupational radiation exposures at the U.S. Department of Energy (DOE) and its contractor employees during 1985.

80

Annual DOE Occupational Radiation Exposure | 1984 Report  

Broader source: Energy.gov [DOE]

The Seventeenth Annual Report of Radiation Exposures for DOE & DOE Contractor Employees analyzes occupational radiation exposures at the U.S. Department of Energy (DOE) and its contractor employees during 1984.

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Annual DOE Occupational Radiation Exposure | 1981 Report  

Broader source: Energy.gov [DOE]

The Fourteenth Annual Report of Radiation Exposures for DOE & DOE Contractor Employees analyzes occupational radiation exposures at the U.S. Department of Energy (DOE) and its contractor employees during 1981.

82

A standalone capacitively coupled occupancy sensor  

E-Print Network [OSTI]

This thesis presents the design and implementation of a standalone, capacitively coupled, occupancy sensor. Unlike previous iterations, the new sensor is decoupled from the fluorescent lamp. A well controlled, high voltage ...

Thompson, William H., M. Eng. Massachusetts Institute of Technology

2013-01-01T23:59:59.000Z

83

Annual DOE Occupational Radiation Exposure | 1977 Report  

Broader source: Energy.gov [DOE]

The Tenth Annual Report of Radiation Exposures for DOE & DOE Contractor Employees analyzes occupational radiation exposures at the U.S. Department of Energy (DOE) and its contractor employees during 1977.

84

Annual DOE Occupational Radiation Exposure | 1978 Report  

Broader source: Energy.gov [DOE]

The Eleventh Annual Report of Radiation Exposures for DOE & DOE Contractor Employees analyzes occupational radiation exposures at the U.S. Department of Energy (DOE) and its contractor employees during 1978.

85

Annual DOE Occupational Radiation Exposure | 1975 Report  

Broader source: Energy.gov [DOE]

The Eighth Annual Report of Radiation Exposures for ERDA & ERDA Contractor Employees analyzes occupational radiation exposures at the Energy Research and Development Administration (ERDA) and its contractor employees during 1975.

86

Identity work and control in occupational communities  

E-Print Network [OSTI]

This chapter is about three highly intertwined concepts. The first concerns occupational communities and the work cultures they nourish. The second concerns the work identities that are valued (and devalued) in such ...

Van Maanen, John

87

Achieving Sustainability, Energy Savings, and Occupant Comfort  

E-Print Network [OSTI]

Sustainability, energy savings, and occupant comfort are not mutually exclusive objectives, as buildings can be designed that incorporate all of these features. Sustainability is often defined as meeting the needs of the present without compromising...

Fisher, D.; Bristow, G.

88

Annual DOE Occupational Radiation Exposure | 1976 Report  

Broader source: Energy.gov [DOE]

The Ninth Annual Report of Radiation Exposures for DOE & DOE Contractor Employees analyzes occupational radiation exposures at the U.S. Department of Energy (DOE) and its contractor employees during 1976.

89

DOE 2010 Occupational Radiation Exposure November 2011  

SciTech Connect (OSTI)

This report discusses radiation protection and dose reporting requirements, presents the 2010 occupational radiation dose data trended over the past 5 years, and includes instructions to submit successful ALARA projects.

U.S. Department of Energy, Office of Health, Safety and Security, Office of Analysis

2011-11-11T23:59:59.000Z

90

Occupant satisfaction with indoor environmental quality in green buildings  

E-Print Network [OSTI]

pollutants, using green materials, giving occupants personal control over operable windows, task air-

Abbaszadeh, S.; Zagreus, Leah; Lehrer, D.; Huizenga, C

2006-01-01T23:59:59.000Z

91

The decay of hot nuclei  

SciTech Connect (OSTI)

The formation of hot compound nuclei in intermediate-energy heavy ion reactions is discussed. The statistical decay of such compound nuclei is responsible for the abundant emission of complex fragments and high energy gamma rays. 43 refs., 23 figs.

Moretto, L.G.; Wozniak, G.J.

1988-11-01T23:59:59.000Z

92

Hot carrier diffusion in graphene  

E-Print Network [OSTI]

We report an optical study of charge transport in graphene. Diffusion of hot carriers in epitaxial graphene and reduced graphene oxide samples are studied using an ultrafast pump-probe technique with a high spatial resolution. Spatiotemporal...

Ruzicka, Brian Andrew; Wang, Shuai; Werake, Lalani Kumari; Weintrub, Ben; Loh, Kian Ping; Zhao, Hui

2010-11-01T23:59:59.000Z

93

Coping with Hot Work Environments  

E-Print Network [OSTI]

exposed to these conditions. A hot work environment can impair safety and health. Both workers and their employers are responsi- ble for taking steps to prevent heat stress in the work- place. How Your Body Handles Heat Humans are warm-blooded, which... evaporation. Wiping sweat from the skin with a cloth also prevents cooling from evaporation. In hot, humid conditions, hard work becomes harder. The sweat glands release moisture and essential David W. Smith, Extension Safety Program The Texas A...

Smith, David

2005-04-28T23:59:59.000Z

94

Measured electric hot water standby and demand loads from Pacific Northwest homes  

SciTech Connect (OSTI)

The Bonneville Power Administration began the End-Use Load and Consumer Assessment Program (ELCAP) in 1983 to obtain metered hourly end-use consumption data for a large sample of new and existing residential and commercial buildings in the Pacific Northwest. Loads and load shapes from the first 3 years of data fro each of several ELCAP residential studies representing various segments of the housing population have been summarized by Pratt et al. The analysis reported here uses the ELCAP data to investigate in much greater detail the relationship of key occupant and tank characteristics to the consumption of electricity for water heating. The hourly data collected provides opportunities to understand electricity consumption for heating water and to examine assumptions about water heating that are critical to load forecasting and conservation resource assessments. Specific objectives of this analysis are to: (A) determine the current baseline for standby heat losses by determining the standby heat loss of each hot water tank in the sample, (B) examine key assumptions affecting standby heat losses such as hot water temperatures and tank sizes and locations, (C) estimate, where possible, impacts on standby heat losses by conservation measures such as insulating tank wraps, pipe wraps, anticonvection valves or traps, and insulating bottom boards, (D) estimate the EF-factors used by the federal efficiency standards and the nominal R-values of the tanks in the sample, (E) develop estimates of demand for hot water for each home in the sample by subtracting the standby load from the total hot water load, (F) examine the relationship between the ages and number of occupants and the hot water demand, (G) place the standby and demand components of water heating electricity consumption in perspective with the total hot water load and load shape.

Pratt, R.G.; Ross, B.A.

1991-11-01T23:59:59.000Z

95

Hot Pot Detail - Evidence of Quaternary Faulting  

SciTech Connect (OSTI)

Compilation of published data, field observations and photo interpretation relevant to Quaternary faulting at Hot Pot.

Lane, Michael

2013-06-27T23:59:59.000Z

96

Hot Pot Detail - Evidence of Quaternary Faulting  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Compilation of published data, field observations and photo interpretation relevant to Quaternary faulting at Hot Pot.

Lane, Michael

97

Modern hot water district heating  

SciTech Connect (OSTI)

The history of district heating in Europe is drastically different from that in the United States. The development of district heating in northern and eastern Europe started in the early 1950s. Hot water rather than steam was used as the transport medium and the systems have proven to be more economical. Recently, the northern European concept has been introduced into two US cities - St. Paul and Willmar, Minnesota. The hot water project in St. Paul started construction and operation in the summer and fall of 1983, respectively. The entire first phase of the St. Paul project will take two summers to construct and will connect approximately 80 buildings for a total of 150 MW(t). The system spans the entire St. Paul business district and includes privately owned offices and retail buildings, city and county government buildings, hospitals, the state Capitol complex, and several industrial customers. The City of Willmar, Minnesota, replaced an old steam system with a modern hot water system in the summer of 1982. The first phase of the hot water system was constructed in the central business district. The system serves a peak thermal load of about 10 MW(t) and includes about 12,000 ft of network. The Willmar system completed the second stage of development in the fall of 1983. These two new systems demonstrate the benefits of the low-temperature hot water district heating technology. The systems are economical to build, have high reliability, and have low maintenance and operating cost.

Karnitz, M.A.; Barnes, M.H.; Kadrmas, C.; Nyman, H.O.

1984-06-01T23:59:59.000Z

98

E-Print Network 3.0 - assessment occupational health Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

results for: assessment occupational health Page: << < 1 2 3 4 5 > >> 1 UWO Occupational Health Care Policy The Occupational Health Care Policy is designed to ensure that all...

99

Hot conditioning equipment conceptual design report  

SciTech Connect (OSTI)

This report documents the conceptual design of the Hot Conditioning System Equipment. The Hot conditioning System will consist of two separate designs: the Hot Conditioning System Equipment; and the Hot Conditioning System Annex. The Hot Conditioning System Equipment Design includes the equipment such as ovens, vacuum pumps, inert gas delivery systems, etc.necessary to condition spent nuclear fuel currently in storage in the K Basins of the Hanford Site. The Hot Conditioning System Annex consists of the facility of house the Hot Conditioning System. The Hot Conditioning System will be housed in an annex to the Canister Storage Building. The Hot Conditioning System will consist of pits in the floor which contain ovens in which the spent nuclear will be conditioned prior to interim storage.

Bradshaw, F.W., Westinghouse Hanford

1996-08-06T23:59:59.000Z

100

Hot Gas Halos in Galaxies  

SciTech Connect (OSTI)

We use Chandra and XMM-Newton to study how the hot gas content in early-type galaxies varies with environment. We find that the L{sub X}-L{sub K} relationship is steeper for field galaxies than for comparable galaxies in groups and clusters. This suggests that internal processes such as supernovae driven winds or AGN feedback may expel hot gas from low mass field galaxies. Such mechanisms are less effective in groups and clusters where the presence of an intragroup or intracluster medium may confine outflowing material.

Mulchaey, John S. [Carnegie Observatories (United States); Jeltema, Tesla E. [UCO/Lick Observatories (United States)

2010-06-08T23:59:59.000Z

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Transportation Secure Data Center: Real-World Data for Value Pricing and Tolling Research (Fact Sheet)  

SciTech Connect (OSTI)

The National Renewable Energy Laboratory (NREL) and the U.S. Department of Transportation (DOT) have launched the free, web-based Transportation Secure Data Center (TSDC). The TSDC (www.nrel.gov/tsdc) preserves respondent anonymity while making vital transportation data available to a broad group of users through secure, online access. The TSDC database provides free-of-charge web-based access to valuable transportation data that can be used for: Location and time-of-day variable tolling research, Mileage-based fee analysis, Travel demand modeling and transit planning, Congestion mitigation research, and Validating transportation data from other sources. The TSDC's two levels of access make composite data available with simple online registration, and allow researchers to use detailed spatial data after completing a straight forward application process.

Not Available

2013-01-01T23:59:59.000Z

102

Occupational Safety, Health, and Environmental Management  

E-Print Network [OSTI]

of health and safety hazards with the work environment. For the safety professional, the environmentalOccupational Safety, Health, and Environmental Management Certificate Program CorporateTraining extension.uci.edu/corporate #12;Safety and health professionals play an important role in maintaining

Stanford, Kyle

103

Resident Advisor Position Description Occupational Summary  

E-Print Network [OSTI]

Resident Advisor Position Description Occupational Summary The Resident Advisor (RA) is assigned and Residence Hall policies. The Resident Advisor provides programming based on an assessment of the community and individual needs. The responsibilities of the Resident Advisor position are implemented under the supervision

Bogaerts, Steven

104

Community Advisor Position Description Occupational Summary  

E-Print Network [OSTI]

Community Advisor Position Description Occupational Summary The Community Advisor (CA) is a full success; personal growth; and responsible citizenship. Terms of Appointment The Community Advisor position Monday, May 12, 2014 (5:00pm). Eligibility The Community Advisor must be a full-time student

Bogaerts, Steven

105

Merger of Occupational Health & Safety Directorate  

E-Print Network [OSTI]

Manager, Mrs Melanie Phillips. As well as being a highly qualified and experienced occupational health as well as being an ex HSE specialist inspector. These attributes will be a strong addition to the new function should be addressed in the first instance to Melanie Phillips (OH Manager) on ext: 8701 (m

Chittka, Lars

106

Towards Occupancy-Driven Heating and Cooling  

E-Print Network [OSTI]

Towards Occupancy-Driven Heating and Cooling Kamin Whitehouse, Juhi Ranjan, Jiakang Lu, Tamim Burke Parabola Architects Galen Staengl Staengl Engineering h HEATING, VENTILATION, AND cooling (HVAC required for heating, ventilation, and cooling (HVAC) by 20%30% by tailoring the conditioning of buildings

Whitehouse, Kamin

107

Stratification in hot water tanks  

SciTech Connect (OSTI)

Stratification in a domestic hot water tank, used to increase system performance by enabling the solar collectors to operate under marginal conditions, is discussed. Data taken in a 120 gallon tank indicate that stratification can be achieved without any special baffling in the tank. (MJF)

Balcomb, J.D.

1982-04-01T23:59:59.000Z

108

Solar Hot Water Market Development in Knoxville, TN | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Information Resources Solar Hot Water Market Development in Knoxville, TN Solar Hot Water Market Development in Knoxville, TN Assessment of local solar hot water markets, market...

109

Indoor Chemistry: Materials, Ventilation Systems, and Occupant Activities  

E-Print Network [OSTI]

controls 1 Introduction Indoor chemistry is now recognized as an important factor influencing occupant exposure to air pollutants,

Morrison, G.C.

2011-01-01T23:59:59.000Z

110

Occupational health and safety specification for construction works contracts  

E-Print Network [OSTI]

Occupational health and safety specification for construction works contracts March 2014 Issued by;#12;Occupational health and safety specification for construction works contracts Contents 1 Scope 1 2 Definitions Health and Safety 1 Specification for Construction Works Contracts Occupational health and safety

Wagner, Stephan

111

Textured Occupancy Grids for Monocular Localization Without Features  

E-Print Network [OSTI]

, and Ronald Parr Abstract-- A textured occupancy grid map is an extremely versatile data structure. It can map representation, the textured occupancy grid, can now be used for humans, robots with laser- dimensional textured occupancy grid map. In such a map, three-dimensional space is discretized into a set

Parr, Ronald

112

Solar Works in Seattle: Domestic Hot Water  

Broader source: Energy.gov [DOE]

Seattle's residential solar hot water workshop. Content also covers general solar resource assessment, siting, and financial incentives.

113

Statistical mechanics of hot dense matter  

SciTech Connect (OSTI)

Research on properties of hot dense matter produced with high intensity laser radiation is described in a brief informal review.

More, R.

1986-10-01T23:59:59.000Z

114

Toolbox Safety Talk Hot Work Safety Procedures  

E-Print Network [OSTI]

Toolbox Safety Talk Hot Work Safety Procedures Environmental Health & Safety Facilities Safety-in sheet to Environmental Health & Safety for recordkeeping. "Hot Work" is defined as any temporary WORK Obtain a hot work permit from your supervisor or safety rep. Ensure fire/smoke detection

Pawlowski, Wojtek

115

Post Occupancy Evaluation of Indoor Environmental Quality in Commercial Buildings: Do green buildings have more satisfied occupants?  

E-Print Network [OSTI]

Post Occupancy Evaluation of Indoor Environmental Quality in Commercial Buildings: Do green of Indoor Environmental Quality in Commercial Buildings: Do green buildings have more satisfied occupants the promise of a bright future ­ just like the green building movement. i #12;Post Occupancy Evaluation

Kammen, Daniel M.

116

Occupational safety and health training in DOE  

SciTech Connect (OSTI)

Occupational safety and health (OSH) policies, programs and activities within DOE are changing rapidly. In June 1989, Secretary of Energy Watkins launched his ``Ten Point Initiative`` charting a new course for the Department of Energy (DOE) toward full accountability in the areas of environment, safety and health. Full compliance with Occupational Safety and Health Administration (OSHA) standards is now mandatory within the Department. Independent ``Tiger Teams`` are performing safety and health compliance assessments at DOE facilities to identify OSH deficiencies. A recent extensive OSHA audit of DOE OSH programs and related activities has resulted in additional changes in DOE OSH requirements. These changes coupled with those pending in the proposed OSHA Reform Act, have had, and will continue to have, a tremendous impact on the roles and responsibilities each of us has within DOE, particularly in the area of OSH training. This presentation focuses on the specific implications these changes have relating to OSH Training Requirements.

Farabaugh, M.J. [Pacific Northwest Lab., Richland, WA (United States); O`Dell, C. [USDOE Office of Safety and Qualtiy Assurance, Germantown, Maryland (United States)

1991-11-01T23:59:59.000Z

117

Occupational safety and health training in DOE  

SciTech Connect (OSTI)

Occupational safety and health (OSH) policies, programs and activities within DOE are changing rapidly. In June 1989, Secretary of Energy Watkins launched his Ten Point Initiative'' charting a new course for the Department of Energy (DOE) toward full accountability in the areas of environment, safety and health. Full compliance with Occupational Safety and Health Administration (OSHA) standards is now mandatory within the Department. Independent Tiger Teams'' are performing safety and health compliance assessments at DOE facilities to identify OSH deficiencies. A recent extensive OSHA audit of DOE OSH programs and related activities has resulted in additional changes in DOE OSH requirements. These changes coupled with those pending in the proposed OSHA Reform Act, have had, and will continue to have, a tremendous impact on the roles and responsibilities each of us has within DOE, particularly in the area of OSH training. This presentation focuses on the specific implications these changes have relating to OSH Training Requirements.

Farabaugh, M.J. (Pacific Northwest Lab., Richland, WA (United States)); O'Dell, C. (USDOE Office of Safety and Qualtiy Assurance, Germantown, Maryland (United States))

1991-11-01T23:59:59.000Z

118

IEQ and the impact on building occupants  

SciTech Connect (OSTI)

Research into indoor environmental quality (IEQ) and its effects on health, comfort and performance of occupants is becoming increasingly essential. Facility managers are interested in IEQ's close relationship to energy use. Employers hope to enhance employee comfort and productivity, reduce absenteeism and health-care costs, and reduce risk of litigation. The rising interest in this field has placed additional pressure on the research community for practical guidelines on creating a safe, healthy and comfortable indoor environment.

Kumar, Satish; Fisk, William J.

2002-08-01T23:59:59.000Z

119

Common occupational classification system - revision 3  

SciTech Connect (OSTI)

Workforce planning has become an increasing concern within the DOE community as the Office of Environmental Restoration and Waste Management (ER/WM or EM) seeks to consolidate and refocus its activities and the Office of Defense Programs (DP) closes production sites. Attempts to manage the growth and skills mix of the EM workforce while retaining the critical skills of the DP workforce have been difficult due to the lack of a consistent set of occupational titles and definitions across the complex. Two reasons for this difficulty may be cited. First, classification systems commonly used in industry often fail to cover in sufficient depth the unique demands of DOE`s nuclear energy and research community. Second, the government practice of contracting the operation of government facilities to the private sector has introduced numerous contractor-specific classification schemes to the DOE complex. As a result, sites/contractors report their workforce needs using unique classification systems. It becomes difficult, therefore, to roll these data up to the national level necessary to support strategic planning and analysis. The Common Occupational Classification System (COCS) is designed to overcome these workforce planning barriers. The COCS is based on earlier workforce planning activities and the input of technical, workforce planning, and human resource managers from across the DOE complex. It provides a set of mutually-exclusive occupation titles and definitions that cover the broad range of activities present in the DOE complex. The COCS is not a required record-keeping or data management guide. Neither is it intended to replace contractor/DOE-specific classification systems. Instead, the system provides a consistent, high- level, functional structure of occupations to which contractors can crosswalk (map) their job titles.

Stahlman, E.J.; Lewis, R.E.

1996-05-01T23:59:59.000Z

120

Headquarters Occupational Safety and Health Program  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To implement the Occupational Safety and Health Program for Department of Energy (DOE) Headquarters employees as an element of the DOE Integrated Safety Management System. Cancels: HQ 3790.2A. Canceled by DOE O 251.91. This directive was reviewed and certified as current and necessary by Bruce M. Carnes, Director, Office of Management, Budget and Evaluation/Chief Financial Officer, 9/18/02. Canceled by DOE N 251.91.

2001-11-03T23:59:59.000Z

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Occupational health experience with organic additives  

SciTech Connect (OSTI)

For many decades, interest in occupational medicine has been focused on the wide variety of organic additives, which includes a large number of substances, for example, dyestuffs, pigments, and auxiliaries for the textile, leather, and paper industries. The reason is that, if the recommended precautions are not observed, there is a risk of exposure to most of these substances during both production and use. Moreover, over the years, some additives have caused concern and aroused suspicion regarding adverse effects on health. In order to deal with health problems in this field, it is important to be aware of how, what, and where occupational diseases or accidents arise. Much knowledge has been gained about these, and it would be an impossible task to give a systematic survey of the data that have accumulated, especially since it is necessary to take account of the problem of exposure to more than one substance. Thus an attempt is made to report on occupational health experience in general, and to demonstrate how an industrial hygienist may approach the many and various problems. Some epidemiological studies on organic additives (auramine, anthraquinone dyestuffs, organic dyes, etc.) are discussed.

Thiess, A.M.; Wellenreuther, G.

1984-12-01T23:59:59.000Z

122

Revealing Occupancy Patterns in Office Buildings Through the use of Annual Occupancy Sensor Data  

SciTech Connect (OSTI)

Energy simulation programs like DOE-2 and EnergyPlus are tools that have been proven to aid with energy calculations to predict energy use in buildings. Some inputs to energy simulation models are relatively easy to find, including building size, orientation, construction materials, and HVAC system size and type. Others vary with time (e.g. weather and occupancy) and some can be a challenge to estimate in order to create an accurate simulation. In this paper, the analysis of occupancy sensor data for a large commercial, multi-tenant office building is presented. It details occupancy diversity factors for private offices and summarizes the same for open offices, hallways, conference rooms, break rooms, and restrooms in order to better inform energy simulation parameters. Long-term data were collected allowing results to be presented to show variations of occupancy diversity factors in private offices for time of day, day of the week, holidays, and month of the year. The diversity factors presented differ as much as 46% from those currently published in ASHRAE 90.1 2004 energy cost method guidelines, a document referenced by energy modelers regarding occupancy diversity factors for simulations. This may result in misleading simulation results and may introduce inefficiencies in the final equipment and systems design.

Carlos Duarte; Kevin Van Den Wymelenberg; Craig Rieger

2013-06-01T23:59:59.000Z

123

Revealing Occupancy Patterns in an Office Building through the Use of Occupancy Sensor Data  

SciTech Connect (OSTI)

Energy simulation programs like DOE-2 and EnergyPlus are tools that have been proven to aid with energy calculations to predict energy use in buildings. Some inputs to energy simulation models are relatively easy to find, including building size, orientation, construction materials, and HVAC system size and type. Others vary with time (e.g. weather and occupancy) and some can be a challenge to estimate in order to create an accurate simulation. In this paper, the analysis of occupancy sensor data for a large commercial, multi-tenant office building is presented. It details occupancy diversity factors for private offices and summarizes the same for open offices, hallways, conference rooms, break rooms, and restrooms in order to better inform energy simulation parameters. Long-term data were collected allowing results to be presented to show variations of occupancy diversity factors in private offices for time of day, day of the week, holidays, and month of the year. The diversity factors presented differ as much as 46% from those currently published in ASHRAE 90.1 2004 energy cost method guidelines, a document referenced by energy modelers regarding occupancy diversity factors for simulations. This may result in misleading simulation results and may introduce inefficiencies in the final equipment and systems design.

Carlos Duarte; Kevin Van Den Wymelenberg; Craig Rieger

2013-12-01T23:59:59.000Z

124

Measured electric hot water standby and demand loads from Pacific Northwest homes. End-Use Load and Consumer Assessment Program  

SciTech Connect (OSTI)

The Bonneville Power Administration began the End-Use Load and Consumer Assessment Program (ELCAP) in 1983 to obtain metered hourly end-use consumption data for a large sample of new and existing residential and commercial buildings in the Pacific Northwest. Loads and load shapes from the first 3 years of data fro each of several ELCAP residential studies representing various segments of the housing population have been summarized by Pratt et al. The analysis reported here uses the ELCAP data to investigate in much greater detail the relationship of key occupant and tank characteristics to the consumption of electricity for water heating. The hourly data collected provides opportunities to understand electricity consumption for heating water and to examine assumptions about water heating that are critical to load forecasting and conservation resource assessments. Specific objectives of this analysis are to: (A) determine the current baseline for standby heat losses by determining the standby heat loss of each hot water tank in the sample, (B) examine key assumptions affecting standby heat losses such as hot water temperatures and tank sizes and locations, (C) estimate, where possible, impacts on standby heat losses by conservation measures such as insulating tank wraps, pipe wraps, anticonvection valves or traps, and insulating bottom boards, (D) estimate the EF-factors used by the federal efficiency standards and the nominal R-values of the tanks in the sample, (E) develop estimates of demand for hot water for each home in the sample by subtracting the standby load from the total hot water load, (F) examine the relationship between the ages and number of occupants and the hot water demand, (G) place the standby and demand components of water heating electricity consumption in perspective with the total hot water load and load shape.

Pratt, R.G.; Ross, B.A.

1991-11-01T23:59:59.000Z

126

Hot  

Office of Scientific and Technical Information (OSTI)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinan antagonist Journal Article: Crystal structureComposite--FORRemarksHEATING DISTRIBUTIONSHistory of

127

Assessment of hot gas contaminant control  

SciTech Connect (OSTI)

The objective of this work is to gather data and information to assist DOE in responding to the NRC recommendation on hot gas cleanup by performing a comprehensive assessment of hot gas cleanup systems for advanced coal-based Integrated Gasification Combined Cycle (IGCC) and Pressurized Fluidized Bed Combustion (PFBC) including the status of development of the components of the hot gas cleanup systems, and the probable cost and performance impacts. The scope and time frame of information gathering is generally responsive to the boundaries set by the National Research council (NRC), but includes a broad range of interests and programs which cover hot gas cleanup through the year 2010. As the status of hot gas cleanup is continually changing, additional current data and information are being obtained for this effort from this 1996 METC Contractors` Review Meeting as well as from the 1996 Pittsburgh Coal Conference, and the University of Karlsruhe Symposium. The technical approach to completing this work consists of: (1) Determination of the status of hot gas cleanup technologies-- particulate collection systems, hot gas desulfurization systems, and trace contaminant removal systems; (2) Determination of hot gas cleanup systems cost and performance sensitivities. Analysis of conceptual IGCC and PFBC plant designs with hot gas cleanup have been performed. The impact of variations in hot gas cleanup technologies on cost and performance was evaluated using parametric analysis of the baseline plant designs and performance sensitivity.

Rutkowski, M.D.; Klett, M.G.; Zaharchuk, R.

1996-12-31T23:59:59.000Z

128

Occupational ALARA Program Guide for Use with Title 10, CFR, Part 835, Occupational Radiation Protection  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Guide provides an acceptable methodology for establishing and operating an occupational "as low as is reasonably achievable" (ALARA) program that will comply with U.S. Department of Energy (DOE) requirements specified in Title 10 of the Code of Federal Regulations (CFR), Part 835, Occupational Radiation Protection (DOE 1998a), hereinafter referred to as 10 CFR 835. For completeness, this Guide also references detailed guidance provided in the DOE-STD-1098-99, RADIOLOGICAL CONTROL (DOE 1999a), hereinafter referred to as the RCS.

1999-03-17T23:59:59.000Z

129

ADVANCED HOT GAS FILTER DEVELOPMENT  

SciTech Connect (OSTI)

Iron aluminide hot gas filters have been developed using powder metallurgy techniques to form seamless cylinders. Three alloys were short-term corrosion tested in simulated IGCC atmospheres with temperatures between 925 F and 1200 F with hydrogen sulfide concentrations ranging from 783 ppm{sub v} to 78,300 ppm{sub v}. Long-term testing was conducted for 1500 hours at 925 F with 78,300 ppm{sub v}. The FAS and FAL alloys were found to be corrosion resistant in the simulated environments. The FAS alloy has been commercialized.

Matthew R. June; John L. Hurley; Mark W. Johnson

1999-04-01T23:59:59.000Z

130

Hot Spot | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to: navigation,Ohio:GreerHi GtelHomer, Alaska:Horace, NorthHorvatic JumpOpenHotPot,Spot

131

DOE 2012 Occupational Radiation Exposure October 2013  

SciTech Connect (OSTI)

The U.S. Department of Energy (DOE) Office of Analysis within the Office of Health, Safety and Security (HSS) publishes the annual DOE Occupational Radiation Exposure Report to provide an overview of the status of radiation protection practices at DOE (including the National Nuclear Security Administration [NNSA]). The DOE 2012 Occupational Radiation Exposure Report provides an evaluation of DOE-wide performance regarding compliance with Title 10, Code of Federal Regulations (C.F.R.), Part 835, Occupational Radiation Protection dose limits and as low as reasonably achievable (ALARA) process requirements. In addition, the report provides data to DOE organizations responsible for developing policies for protection of individuals from the adverse health effects of radiation. The report provides a summary and an analysis of occupational radiation exposure information from the monitoring of individuals involved in DOE activities. Over the past 5-year period, the occupational radiation exposure information is analyzed in terms of aggregate data, dose to individuals, and dose by site. As an indicator of the overall amount of radiation dose received during the conduct of operations at DOE, the report includes information on collective total effective dose (TED). The TED is comprised of the effective dose (ED) from external sources, which includes neutron and photon radiation, and the internal committed effective dose (CED), which results from the intake of radioactive material into the body. The collective ED from photon exposure decreased by 23% between 2011 and 2012, while the neutron dose increased by 5%. The internal dose components of the collective TED decreased by 7%. Over the past 5-year period, 99.99% of the individuals receiving measurable TED have received doses below the 2 roentgen equivalent in man (rems) (20 millisievert [mSv]) TED administrative control level (ACL), which is well below the DOE regulatory limit of 5 rems (50 mSv) TED annually. The occupational radiation exposure records show that in 2012, DOE facilities continued to comply with DOE dose limits and ACLs and worked to minimize exposure to individuals. The DOE collective TED decreased 17.1% from 2011 to 2012. The collective TED decreased at three of the five sites with the largest collective TED. u Idaho Site Collective dose reductions were achieved as a result of continuing improvements at the Advanced Mixed Waste Treatment Project (AMWTP) through the planning of drum movements that reduced the number of times a container is handled; placement of waste containers that created highradiation areas in a centralized location; and increased worker awareness of high-dose rate areas. In addition, Idaho had the largest decrease in the total number of workers with measurable TED (1,143 fewer workers). u Hanford Site (Hanford) An overall reduction of decontamination and decommissioning (D&D) activities at the Plutonium Finishing Plant (PFP) and Transuranic (TRU) retrieval activities resulted in collective dose reductions. u Savannah River Site (SRS) Reductions were achieved through ALARA initiatives employed site wide. The Solid Waste Management Facility used extended specialty tools, cameras and lead shield walls to facilitate removal of drums. These tools and techniques reduce exposure time through improved efficiency, increase distance from the source of radiation by remote monitoring, shield the workers to lower the dose rate, and reduce the potential for contamination and release of material through repacking of waste. Overall, from 2011 to 2012, there was a 19% decrease in the number of workers with measurable dose. Furthermore, due to a slight decrease in both the DOE workforce (7%) and monitored workers (10%), the ratio of workers with measurable doses to monitored workers decreased to 13%. Another primary indicator of the level of radiation exposure covered in this report is the average measurable dose, which normalizes the collective dose over the population of workers who actually received a measurable dose. The average measurable TED in

none,

2012-02-02T23:59:59.000Z

132

Using an Occupant Energy Index for Achieving Zero Energy Homes  

E-Print Network [OSTI]

of the occupants from the house, turn off all of the HVAC systems, flip off the lights and unplug all the appliances. Is the result a zero energy home? Most would think not, because once the occupants return the odds are good that consumption...-conservative occupants, an ENERGY STAR refrigerator and a best-available efficiency refrigerator were modeled, as well as no refrigerator at all. These modifications impacted the appliances, heating and cooling energy consumption of the baseline home...

Dean, B.; Gamble, D.; Kaiser, D.; Meisegeier, D.

2006-01-01T23:59:59.000Z

133

Occupational Safety Review of High Technology Facilities  

SciTech Connect (OSTI)

This report contains reviews of operating experiences, selected accident events, and industrial safety performance indicators that document the performance of the major US DOE magnetic fusion experiments and particle accelerators. These data are useful to form a basis for the occupational safety level at matured research facilities with known sets of safety rules and regulations. Some of the issues discussed are radiation safety, electromagnetic energy exposure events, and some of the more widespread issues of working at height, equipment fires, confined space work, electrical work, and other industrial hazards. Nuclear power plant industrial safety data are also included for comparison.

Lee Cadwallader

2005-01-31T23:59:59.000Z

134

Systems and methods for sensing occupancy  

DOE Patents [OSTI]

A computer implemented method for sensing occupancy of a workspace includes creating a difference image that represents luminance differences of pixels in past and current images of the workspace resulting from motion in the workspace, determining motion occurring in regions of the workspace based on the difference image, and altering a workspace environment based at least in part on the determined motion. The method also includes determining which pixels in the difference image represent persistent motion that can be ignored and determining which pixels representing motion in the difference image are invalid because the pixels are isolated from other pixels representing motion.

Dasu, Aravind; Mathias, Dean; Liu, Chenguang; Christensen, Randy; Christensen, Bruce

2014-09-09T23:59:59.000Z

135

Case Management - HPMC Occupational Health Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New Substation Sites ProposedOccupational Health Services > Return to Work >

136

DOE 2008 Occupational Radiation Exposure October 2009  

SciTech Connect (OSTI)

A major priority of the U.S. Department of Energy (DOE) is to ensure the health, safety, and security of DOE employees, contractors, and subcontractors. The Office of Health, Safety and Security (HSS) provides the corporate-level leadership and strategic vision necessary to better coordinate and integrate health, safety, environment, security, enforcement, and independent oversight programs. One function that supports this mission is the DOE Corporate Operating Experience Program that provides collection, analysis, and dissemination of performance indicators, such as occupational radiation exposure information. This analysis supports corporate decision-making and synthesizes operational information to support continuous environment, safety, and health improvement across the DOE complex.

U.S. Department of Energy, Office of Health, Safety and Security

2009-10-01T23:59:59.000Z

137

Worksite Visits - HPMC Occupational Health Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun1 TableContactsOccupational Health Services

138

Medical Exams - HPMC Occupational Health Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping the NanoscaleMechanical BehaviorSummerwelcome dayOccupational

139

Detachment Faulting & Geothermal Resources - Pearl Hot Spring...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Faulting & Geothermal Resources - Pearl Hot Spring, NV Conducting a 3D Converted Shear Wave Project to Reduce Exploration Risk at Wister, CA Crump Geyser: High Precision...

140

Covered Product Category: Hot Food Holding Cabinets  

Broader source: Energy.gov [DOE]

The Federal Energy Management Program (FEMP) provides acquisition guidance for hot food holding cabinets, which are covered by the ENERGY STAR program.

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Monitoring SERC Technologies Solar Hot Water  

Broader source: Energy.gov [DOE]

A webinar by National Renewable Energy Laboratory analyst Eliza Hotchkiss on Solar Hot Water systems and how to properly monitor their installation.

142

Solar Hot Water Resources and Technologies  

Broader source: Energy.gov [DOE]

This page provides a brief overview of solar hot water (SHW) technologies supplemented by specific information to apply SHW within the Federal sector.

143

Fiscal Year 2013 Department of Energy Annual Occupational Safety...  

Energy Savers [EERE]

Fiscal Year 2013 Department of Energy Annual Occupational Safety and Health Report for Federal Employees to the Secretary of Labor Fiscal Year 2013 Department of Energy Annual...

144

PIA - Savannah River Nuclear Solution (SRNS) MedGate Occupational...  

Office of Environmental Management (EM)

Occupational Health and Safety Medical System (OHS) (Includes the Drug and Alcohol Testing System (Assistant)) PIA - Savannah River Nuclear Solution (SRNS) MedGate...

145

PROMOTING ENERGY CONSERVATION THROUGH OCCUPATIONAL LICENSURE: A FEASIBILITY STUDY  

E-Print Network [OSTI]

Interim Criteria for Energy Conservation in New Buildings",Robert and others, "Energy Conservation Program Guide forDivision Promoting Energy Conservation Through Occupational

Wilms, W.W.

2010-01-01T23:59:59.000Z

146

A Basic Overview of Occupational Radiation Exposure Monitoring...  

Office of Environmental Management (EM)

Analysis & Reporting A Basic Overview of Occupational Radiation Exposure Monitoring, Analysis & Reporting September 2012 This pamphlet is intended to provide a short summary...

147

Code of Federal Regulations PART 835-OCCUPATIONAL RADIATION PROTECTION...  

Office of Environmental Management (EM)

& Publications Code of Federal Regulations OCCUPATIONAL RADIATION PROTECTION An Engine Exhaust Particle SizerTM Spectrometer for Transient Emission Particle Measurements...

148

Occupant satisfaction with indoor environmental quality in green buildings  

E-Print Network [OSTI]

Environmental Quality in Green Buildings S. Abbaszadeh 1 ,office buildings, comparing green with non-green buildings.On average, occupants in green buildings were more satisfied

Abbaszadeh, S.; Zagreus, Leah; Lehrer, D.; Huizenga, C

2006-01-01T23:59:59.000Z

149

Relationship between Hot Spot Residues and Ligand Binding Hot Spots in Protein-Protein Interfaces  

E-Print Network [OSTI]

, while identification of a hot spot by alanine scanning establishes the potential to generate substantial, termed "hot spots", that comprise the subset of residues that contribute the bulk of the binding free proposed as prime targets for drug binding.1,4 The established approach to the identification of such hot

Vajda, Sandor

150

Hot electron production and heating by hot electrons in fast ignitor research  

SciTech Connect (OSTI)

In an experimental study of the physics of fast ignition the characteristics of the hot electron source at laser intensities up to 10(to the 20th power) Wcm{sup -2} and the heating produced at depth by hot electrons have been measured. Efficient generation of hot electrons but less than the anticipated heating have been observed.

Key, M.H.; Estabrook, K.; Hammel, B. [and others

1997-12-01T23:59:59.000Z

151

Occupancy Simulation in Three Residential Research Houses  

SciTech Connect (OSTI)

Three houses of similar floor plan are being compared for energy consumption. The first house is a typical builder house of 2400 ft2 (223 m2) in east Tennessee. The second house contains retrofits available to a home owner such as energy efficient appliances, windows and HVAC, as well as an insulated attic which contains HVAC duct work. The third house was built using optimum-value framing construction with photovoltaic modules and solar water heating. To consume energy researchers have set up appliances, lights, and plug loads to turn on and off automatically according to a schedule based on the Building America Research Benchmark Definition. As energy efficiency continues to be a focus for protecting the environment and conserving resources, experiments involving whole house energy consumption will be done. In these cases it is important to understand how to simulate occupancy so that data represents only house performance and not human behavior. The process for achieving automated occupancy simulation will be discussed. Data comparing the energy use of each house will be presented and it will be shown that the third house used 66% less and the second house used 36% less energy than the control house in 2010. The authors will discuss how energy prudent living habits can further reduce energy use in the third house by 23% over the average American family living in the same house.

Boudreaux, Philip R [ORNL; Gehl, Anthony C [ORNL; Christian, Jeffrey E [ORNL

2012-01-01T23:59:59.000Z

152

DOE occupational radiation exposure 1996 report  

SciTech Connect (OSTI)

The goal of the US Department of Energy (DOE) is to conduct its radiological operations to ensure the health and safety of all DOE employees including contractors and subcontractors. The DOE strives to maintain radiation exposures to its workers below administrative control levels and DOE limits and to further reduce these exposures and releases to levels that are ``As Low As Reasonably Achievable`` (ALARA). The DOE Occupational Radiation Exposure Report, 1996 provides summary and analysis of the occupational radiation exposure received by individuals associated with DOE activities. The DOE mission includes stewardship of the nuclear weapons stockpile and the associated facilities, environmental restoration of DOE and precursor agency sites, and energy research. Collective exposure at DOE has declined by 80% over the past decade due to a cessation in opportunities for exposure during the transition in DOE mission from weapons production to cleanup, deactivation and decommissioning, and changes in reporting requirements and dose calculation methodology. In 1996, the collective dose decreased by 10% from the 1995 value due to decreased doses at five of the seven highest-dose DOE sites. For 1996, these sites attributed the reduction in collective dose to the completion of several decontamination and decommissioning projects, reduced spent fuel storage activities, and effective ALARA practices. This report is intended to be a valuable tool for managers in their management of radiological safety programs and commitment of resources.

NONE

1996-12-31T23:59:59.000Z

153

ADVANCED HOT GAS FILTER DEVELOPMENT  

SciTech Connect (OSTI)

DuPont Lanxide Composites, Inc. undertook a sixty-month program, under DOE Contract DEAC21-94MC31214, in order to develop hot gas candle filters from a patented material technology know as PRD-66. The goal of this program was to extend the development of this material as a filter element and fully assess the capability of this technology to meet the needs of Pressurized Fluidized Bed Combustion (PFBC) and Integrated Gasification Combined Cycle (IGCC) power generation systems at commercial scale. The principal objective of Task 3 was to build on the initial PRD-66 filter development, optimize its structure, and evaluate basic material properties relevant to the hot gas filter application. Initially, this consisted of an evaluation of an advanced filament-wound core structure that had been designed to produce an effective bulk filter underneath the barrier filter formed by the outer membrane. The basic material properties to be evaluated (as established by the DOE/METC materials working group) would include mechanical, thermal, and fracture toughness parameters for both new and used material, for the purpose of building a material database consistent with what is being done for the alternative candle filter systems. Task 3 was later expanded to include analysis of PRD-66 candle filters, which had been exposed to actual PFBC conditions, development of an improved membrane, and installation of equipment necessary for the processing of a modified composition. Task 4 would address essential technical issues involving the scale-up of PRD-66 candle filter manufacturing from prototype production to commercial scale manufacturing. The focus would be on capacity (as it affects the ability to deliver commercial order quantities), process specification (as it affects yields, quality, and costs), and manufacturing systems (e.g. QA/QC, materials handling, parts flow, and cost data acquisition). Any filters fabricated during this task would be used for product qualification tests being conducted by Westinghouse at Foster-Wheeler's Pressurized Circulating Fluidized Bed (PCFBC) test facility in Karhula, Finland. Task 5 was designed to demonstrate the improvements implemented in Task 4 by fabricating fifty 1.5-meter hot gas filters. These filters were to be made available for DOE-sponsored field trials at the Power Systems Development Facility (PSDF), operated by Southern Company Services in Wilsonville, Alabama.

E.S. Connolly; G.D. Forsythe

2000-09-30T23:59:59.000Z

154

851 S.W. Sixth Avenue, Suite 1100 Telephone: 503-222-5161 Fax: 503-820-2370 Portland, Oregon 97204-1348 Toll free: 800-452-5161 Web site: www.nwcouncil.org  

E-Print Network [OSTI]

-1348 Toll free: 800-452-5161 Web site: www.nwcouncil.org JUDI DANIELSON CHAIR Idaho TOM KARIER VICE 97204-1348 Toll free: 800-452-5161 Web site: www.nwcouncil.org JUDI DANIELSON CHAIR Idaho TOM KARIER

155

Ceramic hot-gas filter  

DOE Patents [OSTI]

A ceramic hot-gas candle filter having a porous support of filament-wound oxide ceramic yarn at least partially surrounded by a porous refractory oxide ceramic matrix, and a membrane layer on at least one surface thereof. The membrane layer may be on the outer surface, the inner surface, or both the outer and inner surface of the porous support. The membrane layer may be formed of an ordered arrangement of circularly wound, continuous filament oxide ceramic yarn, a ceramic filler material which is less permeable than the filament-wound support structure, or some combination of continuous filament and filler material. A particularly effective membrane layer features circularly wound filament with gaps intentionally placed between adjacent windings, and a filler material of ceramic particulates uniformly distributed throughout the gap region. The filter can withstand thermal cycling during backpulse cleaning and is resistant to chemical degradation at high temperatures.

Connolly, Elizabeth Sokolinski (Wilmington, DE); Forsythe, George Daniel (Landenberg, PA); Domanski, Daniel Matthew (New Castle, DE); Chambers, Jeffrey Allen (Hockessin, DE); Rajendran, Govindasamy Paramasivam (Boothwyn, PA)

1999-01-01T23:59:59.000Z

156

Ceramic hot-gas filter  

DOE Patents [OSTI]

A ceramic hot-gas candle filter is described having a porous support of filament-wound oxide ceramic yarn at least partially surrounded by a porous refractory oxide ceramic matrix, and a membrane layer on at least one surface thereof. The membrane layer may be on the outer surface, the inner surface, or both the outer and inner surface of the porous support. The membrane layer may be formed of an ordered arrangement of circularly wound, continuous filament oxide ceramic yarn, a ceramic filler material which is less permeable than the filament-wound support structure, or some combination of continuous filament and filler material. A particularly effective membrane layer features circularly wound filament with gaps intentionally placed between adjacent windings, and a filler material of ceramic particulates uniformly distributed throughout the gap region. The filter can withstand thermal cycling during back pulse cleaning and is resistant to chemical degradation at high temperatures.

Connolly, E.S.; Forsythe, G.D.; Domanski, D.M.; Chambers, J.A.; Rajendran, G.P.

1999-05-11T23:59:59.000Z

157

Hot Dry Rock; Geothermal Energy  

SciTech Connect (OSTI)

The commercial utilization of geothermal energy forms the basis of the largest renewable energy industry in the world. More than 5000 Mw of electrical power are currently in production from approximately 210 plants and 10 000 Mw thermal are used in direct use processes. The majority of these systems are located in the well defined geothermal generally associated with crustal plate boundaries or hot spots. The essential requirements of high subsurface temperature with huge volumes of exploitable fluids, coupled to environmental and market factors, limit the choice of suitable sites significantly. The Hot Dry Rock (HDR) concept at any depth originally offered a dream of unlimited expansion for the geothermal industry by relaxing the location constraints by drilling deep enough to reach adequate temperatures. Now, after 20 years intensive work by international teams and expenditures of more than $250 million, it is vital to review the position of HDR in relation to the established geothermal industry. The HDR resource is merely a body of rock at elevated temperatures with insufficient fluids in place to enable the heat to be extracted without the need for injection wells. All of the major field experiments in HDR have shown that the natural fracture systems form the heat transfer surfaces and that it is these fractures that must be for geothermal systems producing from naturally fractured formations provide a basis for directing the forthcoming but, equally, they require accepting significant location constraints on HDR for the time being. This paper presents a model HDR system designed for commercial operations in the UK and uses production data from hydrothermal systems in Japan and the USA to demonstrate the reservoir performance requirements for viable operations. It is shown that these characteristics are not likely to be achieved in host rocks without stimulation processes. However, the long term goal of artificial geothermal systems developed by systematic engineering procedures at depth may still be attained if high temperature sites with extensive fracturing are developed or exploited. [DJE -2005

None

1990-01-01T23:59:59.000Z

158

Disaggregating residential hot water use. Part 2  

SciTech Connect (OSTI)

A major obstacle to gathering detailed data on end-use hot water consumption within residences and commercial buildings is the cost and complexity of the field tests. An earlier study by the authors presented a methodology that could accurately disaggregate hot water consumption into individual end-uses using only information on the flow of hot water from the water heater. The earlier methodology can be extended to a much larger population of buildings, without greatly increasing the cost and complexity of the data collection and analysis, by monitoring the temperature of the hot water lines that go to different parts of the building. For the three residences studied here, thermocouples /monitored the temperatures of four hot water lines at each site. The thermocouple readings provide a positive indication of when hot water starts to flow in a line. Since the end-uses served by each hot water line are known, the uncertainty in assigning a draw to a particular end-use is greatly reduced. Benefits and limitations for the methodology are discussed in the paper. Using the revised methodology, hot water usage in three residences is disaggregated into the following end-uses: showers, baths, clothes washing, dishwashing, kitchen sink, and bathroom sink. For two residences, the earlier methodology--which does not use the thermocouple data--is also used to disaggregate the same draw data.

Lowenstein, A. [AIL Research, Inc., Princeton, NJ (United States); Hiller, C.C. [Electric Power Research Inst., Palo Alto, CA (United States)

1998-10-01T23:59:59.000Z

159

FOOD AND DRINK REGULATIONS Serving hot food  

E-Print Network [OSTI]

of food poisoning increases as time passes. · Hand contact with unwrapped food should be kept to a minimum1 FOOD AND DRINK REGULATIONS Serving hot food Home made hot food may not be served at events conditions must be adhered to: · The caterer must have HSE Food Hygiene Certification, which

O'Mahony, Donal E.

160

Are we putting in hot water?  

E-Print Network [OSTI]

, and habitat loss will increase. And while slightly warmer water may not sound so bad to many of us, its effectAre we putting our fish in hot water? Global warming and the world's fisheries · Hot, hungry, and gasping for air · Shrinking fish and fewer babies? · Global warming puts fish on the run · Warm water

Combes, Stacey A.

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Albert Ludwig University of Freiburg Occupational health and safety  

E-Print Network [OSTI]

Effective safety at work can be accomplished only if the employees cooperate. You are obligated to · payAlbert Ludwig University of Freiburg Occupational health and safety Leaflet for employees Numerous laws and regulations have been passed to guarantee occupational health and safety. Industrial safety

Schindelhauer, Christian

162

MINUTES OF THE JOINT OCCUPATIONAL HEALTH & SAFETY COMMITTEE (JOHSC) MEETING  

E-Print Network [OSTI]

, e.g. the Health Care Corporation, Basic Medical Sciences, Pharmacy, etc. and that no definite safetyMINUTES OF THE JOINT OCCUPATIONAL HEALTH & SAFETY COMMITTEE (JOHSC) MEETING Wednesday, February 7 as the Committee's newest member. Dr. LeFort has completed the Occupational Health & Safety Certification Training

deYoung, Brad

163

Air movement as an energy efficient means toward occupant comfort  

E-Print Network [OSTI]

architects involved in energy-efficient design. It might beenergy efficient, comfortable and acceptable to occupants, visually attractive to building management and designers, and straightforward to design.energy efficient, comfortable and acceptable to occupants, visually attractive to building management and designers, and straightforward to design.

Arens, Edward; Zhang, Hui; Pasut, Wilmer; Zhai, Yongchao; Hoyt, Tyler; Huang, Li

2013-01-01T23:59:59.000Z

164

Free Space Computation Using Stochastic Occupancy Grids and Dynamic Programming  

E-Print Network [OSTI]

1 Free Space Computation Using Stochastic Occupancy Grids and Dynamic Programming Hern´an Badino1Chrysler AG, Stuttgart Abstract. The computation of free space available in an environment is an essential, which builds a stochastic occupancy grid to address the free space problem as a dynamic pro- gramming

Mester, Rudolf

165

ThermoSense: Occupancy Thermal Based Sensing for HVAC Control  

E-Print Network [OSTI]

ThermoSense: Occupancy Thermal Based Sensing for HVAC Control Alex Beltran Elect. Eng. & Comp Occupancy Sensing, Thermal Sensing, HVAC Control 1. INTRODUCTION From 1980 to 2010, energy in the United, November 13-14 2013, Rome, Italy. Copyright 2013 ACM 978-1-4503-2431-1/13/11 ...$15.00. (HVAC) consumed 42

Cerpa, Alberto E.

166

NIH POLICY MANUAL 1430 NIH OCCUPANT EVACUATION PLAN  

E-Print Network [OSTI]

NIH POLICY MANUAL 1430 NIH OCCUPANT EVACUATION PLAN Issuing Office & Phone: ORS/DPS 496-1985 Release Date: 2/14/02 1. Explanation of Material Transmitted: This Chapter establishes the NIH Occupant life and property during emergencies in all buildings occupied by NIH employees. 2. Filing Instructions

Bandettini, Peter A.

167

"Designing equipment and buildings to more quickly respond to occupant  

E-Print Network [OSTI]

GRANTS · NSF ­ Occupant Oriented Heating and Cooling · NSF ­ Body Area Sensor Networks: A Holistic building technology to improve building efficiency by using information about occupant locations energy with only $25 in sensors. As an extension of this work, we propose installing servers into homes

Acton, Scott

168

Wavelet Occupancy Grids: a Method for Compact Map Building  

E-Print Network [OSTI]

Wavelet Occupancy Grids: a Method for Compact Map Building Manuel Yguel, Olivier Aycard for multi-resolution map building based on wavelets, which we call the wavelet occupancy grid (WavOG). Pai representation and data storage for large maps, under the constraints of multi-sensor real-time updates

Paris-Sud XI, Universit de

169

CROSS-CULTURAL EXPLORATORY ANALYSIS OF OCCUPATIONAL ENGAGEMENT BETWEEN ASIAN AMERICAN AND CAUCASIAN AMERICAN COLLEGE STUDENTS  

E-Print Network [OSTI]

values and no significant relationship with level of acculturation. Results from the study yielded two newly developed measures of occupational engagement, the Occupational Engagement Scale-Asian American (OES-AA) and Occupational Engagement...

Le, Quoc (Thai) My

2012-08-31T23:59:59.000Z

170

Occupational Injury Rate Estimates in Magnetic Fusion Experiments  

SciTech Connect (OSTI)

In nuclear facilities, there are two primary aspects of occupational safety. The first aspect is radiological safety, which has rightly been treated in detail in nuclear facilities. Radiological exposure data have been collected from the existing tokamaks to serve as forecasts for ITER radiation safety. The second aspect of occupational safety, traditional industrial safety, must also be considered for a complete occupational safety program. Industrial safety data on occupational injury rates from the JET and TFTR tokamaks, three accelerators, and U.S. nuclear fission plants have been collected to set industrial safety goals for the ITER operations staff. The results of this occupational safety data collection and analysis activity are presented here. The data show that an annual lost workday case rate of 0.3 incidents per 100 workers is a conceivable goal for ITER operations.

cadwallader, lee

2006-11-01T23:59:59.000Z

171

Emission of Visible Light by Hot Dense Metals  

E-Print Network [OSTI]

HIFAN 1761 EMISSION OF VISIBLE LIGHT BY HOT DENSE METALS ByDE-AC52-07NA27344. HI FAN Emission of Visible Light by HotABSTRACT We consider the emission of visible light by hot

More, R.M.

2010-01-01T23:59:59.000Z

172

E-Print Network 3.0 - agent causing occupational Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

pathology andor an occupational exposure defined by noxious agent, profession... as shown in fig. 1D. D) The tripartite network: disease-noxious agent-occupation is the...

173

Jackson Hot Springs Lodge Space Heating Low Temperature Geothermal...  

Open Energy Info (EERE)

Hot Springs Lodge Space Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Jackson Hot Springs Lodge Space Heating Low Temperature Geothermal Facility...

174

Steamboat Villa Hot Springs Spa Space Heating Low Temperature...  

Open Energy Info (EERE)

Villa Hot Springs Spa Space Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Steamboat Villa Hot Springs Spa Space Heating Low Temperature Geothermal...

175

Broadwater Athletic Club & Hot Springs Space Heating Low Temperature...  

Open Energy Info (EERE)

Athletic Club & Hot Springs Space Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Broadwater Athletic Club & Hot Springs Space Heating Low Temperature...

176

Salida Hot Springs (Poncha Spring) Space Heating Low Temperature...  

Open Energy Info (EERE)

Salida Hot Springs (Poncha Spring) Space Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Salida Hot Springs (Poncha Spring) Space Heating Low...

177

Thermal Gradient Holes At Spencer Hot Springs Area (Shevenell...  

Open Energy Info (EERE)

discoveries to the attention of the geothermal community. Exploration holes at Tungsten Mountain and McGuiness Hills (Spencer Hot Springs?) in 2004 and 2005 encountered hot...

178

Quenching and Partitioning Process Development to Replace Hot...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and Partitioning Process Development to Replace Hot Stamping of High-Strength Automotive Steel Quenching and Partitioning Process Development to Replace Hot Stamping of...

179

Isotopic Analysis- Fluid At Indian Valley Hot Springs Geothermal...  

Open Energy Info (EERE)

Activity: Isotopic Analysis- Fluid At Indian Valley Hot Springs Geothermal Area (1990) Exploration Activity Details Location Indian Valley Hot Springs Geothermal Area...

180

Chena Hot Springs Resort - Electric Power Generation Using Geothermal...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Hot Springs Resort - Electric Power Generation Using Geothermal Fluid Coproduced from Oil andor Gas Wells Chena Hot Springs Resort - Electric Power Generation Using Geothermal...

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Aeromagnetic Survey At Roosevelt Hot Springs Geothermal Area...  

Open Energy Info (EERE)

literature review of the Roosevelt Hot Springs Geothermal Area. Notes Aeromagnetic intensity residual map compiled for Roosevelt Hot Springs Geothermal Area, providing...

182

Compound and Elemental Analysis At Lake City Hot Springs Area...  

Open Energy Info (EERE)

Lake City Hot Springs Area (Warpinski, Et Al., 2004) Exploration Activity Details Location Lake City Hot Springs Area Exploration Technique Compound and Elemental Analysis Activity...

183

Compound and Elemental Analysis At Lake City Hot Springs Area...  

Open Energy Info (EERE)

Lake City Hot Springs Area (Sladek, Et Al., 2004) Exploration Activity Details Location Lake City Hot Springs Area Exploration Technique Compound and Elemental Analysis Activity...

184

Ground Gravity Survey At Lake City Hot Springs Area (Warpinski...  

Open Energy Info (EERE)

Lake City Hot Springs Area (Warpinski, Et Al., 2004) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Ground Gravity Survey At Lake City Hot...

185

Data Acquisition-Manipulation At Lake City Hot Springs Area ...  

Open Energy Info (EERE)

Lake City Hot Springs Area (Warpinski, Et Al., 2004) Exploration Activity Details Location Lake City Hot Springs Area Exploration Technique Data Acquisition-Manipulation Activity...

186

Model Simulating Real Domestic Hot Water Use - Building America...  

Energy Savers [EERE]

Model Simulating Real Domestic Hot Water Use - Building America Top Innovation Model Simulating Real Domestic Hot Water Use - Building America Top Innovation Image of a pipe...

187

Webinar: ENERGY STAR Hot Water Systems for High Performance Homes...  

Energy Savers [EERE]

Webinar: ENERGY STAR Hot Water Systems for High Performance Homes Webinar: ENERGY STAR Hot Water Systems for High Performance Homes This presentation is from the Building America...

188

Seismic baseline and induction studies- Roosevelt Hot Springs...  

Open Energy Info (EERE)

studies- Roosevelt Hot Springs, Utah and Raft River, Idaho Abstract Local seismic networks were established at the Roosevelt Hot Springs geothermal area, utah and at Raft...

189

Volume reduction of hot cell plastic wastes  

SciTech Connect (OSTI)

The disposal of radioactively-contaminated solid wastes has become a national crisis. In such circumstances, it is imperative that this waste be reduced to minimum volume and be packaged to prevent pollution of the environment. The majority of the solid waste generated at the hot cell under consideration is plastic lab ware. Cutting this waste into small pieces with a hot wire technique reduced the volume 66%. Melting the waste, although more time consuming, reduced the volume 90%. The hot wire technique can also be used to cut up damaged master slave manipulator boots, greatly reducing their disposal volume.

Dykes, F W; Henscheid, J P; Lewis, L C; Lundholm, C W; Nicklas, J H

1989-09-19T23:59:59.000Z

190

Exergy and Energy analysis of a ground-source heat pump for domestic water heating under simulated occupancy conditions  

SciTech Connect (OSTI)

This paper presents detailed analysis of a water to water ground source heat pump (WW-GSHP) to provide all the hot water needs in a 345 m2 house located in DOE climate zone 4 (mixed-humid). The protocol for hot water use is based on the Building America Research Benchmark Definition (Hendron 2008; Hendron and Engebrecht 2010) which aims to capture the living habits of the average American household and its impact on energy consumption. The entire house was operated under simulated occupancy conditions. Detailed energy and exergy analysis provides a complete set of information on system efficiency and sources of irreversibility, the main cause of wasted energy. The WW-GSHP was sized at 5.275 kW (1.5-ton) for this house and supplied hot water to a 303 L (80 gal) water storage tank. The WW-GSHP shared the same ground loop with a 7.56 kW (2.1-ton) water to air ground source heat pump (WA-GSHP) which provided space conditioning needs to the entire house. Data, analyses, and measures of performance for the WW-GSHP in this paper complements the results of the WA-GSHP published in this journal (Ally, Munk et al. 2012). Understanding the performance of GSHPs is vital if the ground is to be used as a viable renewable energy resource.

Ally, Moonis Raza [ORNL; Munk, Jeffrey D [ORNL; Baxter, Van D [ORNL; Gehl, Anthony C [ORNL

2012-01-01T23:59:59.000Z

191

NCSU Box 7401 Raleigh, NC 27695 (919) 515-3480 Toll Free 1-800-33-NC SUN SOLAR CENTER INFORMATION  

E-Print Network [OSTI]

Solar Home #12;NorthCarolinaSolarCenter EnergyDivision,NCDepartmentofCommerce Box 7401, NCSU, Raleigh. At North Carolinas latitudes, this means that the area extending from 45o east of south to 45o westNCSU Box 7401 Raleigh, NC 27695 (919) 515-3480 Toll Free 1-800-33-NC SUN SOLAR CENTER

192

SOLAR CENTER INFORMATION NCSU Box 7401 Raleigh, NC 27695 (919) 515-3480 Toll Free 1-800-33-NC SUN  

E-Print Network [OSTI]

SOLAR CENTER INFORMATION NCSU Box 7401 Raleigh, NC 27695 (919) 515-3480 Toll Free 1-800-33-NC SUN Summer Shading and Exterior Insulation for North Carolina Windows The same windows that provide window energy efficiency. A well-insulated window will never be as efficient as a well-insulated wall

193

Charm and Beauty in a Hot Environment  

E-Print Network [OSTI]

We discuss the spectral analysis of quarkonium states in a hot medium of deconfined quarks and gluons, and we show that such an analysis provides a way to determine the thermal properties of the quark-gluon plasma.

Helmut Satz

2006-02-28T23:59:59.000Z

194

Extracting hot carriers from photoexcited semiconductor nanocrystals  

SciTech Connect (OSTI)

During this funding period, we made a significant breakthrough and established for the first time that hot electron transfer from photoexcited NCs to an electron acceptor was indeed possible.

Zhu, Xiaoyang [Columbia University Department of Chemistry

2013-09-12T23:59:59.000Z

195

Arnold Schwarzenegger WATER HEATERS AND HOT WATER  

E-Print Network [OSTI]

Arnold Schwarzenegger Governor WATER HEATERS AND HOT WATER DISTRIBUTION SYSTEMS;#12;Appendices Appendix A. Multifamily Water Heating Construction Practices, Pricing and Availability Survey Report Appendix B. Multifamily Water Heating Controls Performance Field Report Appendix C. Pipe

196

World launch! Hot-Steam Aerostat  

E-Print Network [OSTI]

Info HeiDAS UH World launch! Hot-Steam Aerostat #12;"If you intend to view the land, if you plan Verne: "Fife weeks on a balloon". HeiDAS stands for Hei?DampfAeroStat (Hot-Steam AeroStat) and it refers to the first operable balloon ever that became buoyant by means of superheated steam. The performance of Hei

Berlin,Technische Universität

197

Disaggregating Hot Water Use and Predicting Hot Water Waste in Five Test Homes  

SciTech Connect (OSTI)

While it is important to make the equipment (or 'plant') in a residential hot water system more efficient, the hot water distribution system also affects overall system performance and energy use. Energy wasted in heating water that is not used is estimated to be on the order of 10 to 30 percent of total domestic hot water (DHW) energy use. This field monitoring project installed temperature sensors on the distribution piping (on trunks and near fixtures) and programmed a data logger to collect data at 5 second intervals whenever there was a hot water draw. This data was used to assign hot water draws to specific end uses in the home as well as to determine the portion of each hot water that was deemed useful (i.e., above a temperature threshold at the fixture). Five houses near Syracuse NY were monitored. Overall, the procedures to assign water draws to each end use were able to successfully assign about 50% of the water draws, but these assigned draws accounted for about 95% of the total hot water use in each home. The amount of hot water deemed as useful ranged from low of 75% at one house to a high of 91% in another. At three of the houses, new water heaters and distribution improvements were implemented during the monitoring period and the impact of these improvements on hot water use and delivery efficiency were evaluated.

Henderson, H.; Wade, J.

2014-04-01T23:59:59.000Z

198

Canopy hot-spot as crop identifier  

SciTech Connect (OSTI)

Illuminating any reflective rough or structured surface by a directional light source results in an angular reflectance distribution that shows a narrow peak in the direction of retro-reflection. This is called the Heiligenschein or hot-spot of vegetation canopies and is caused by mutual shading of leaves. The angular intensity distribution of the hot-spot, its brightness and slope, are therefore indicators of the plant's geometry. We propose the use of hot-spot characteristics as crop identifiers in satellite remote sensing because the canopy hot-spot carries information about plant stand architecture that is more distinctive for different plant species than, for instance, their spectral reflectance characteristics. A simple three-dimensional Monte Carlo/ray tracing model and an analytic two-dimensional model are developed to estimate the angular distribution of the hot-spot as a function of the size of the plant leaves. The results show that the brightness-distribution and slope of the hot-spot change distinctively for different leaf sizes indicating a much more peaked maximum for the smaller leaves.

Gerstl, S.A.W.; Simmer, C.; Powers, B.J.

1986-05-01T23:59:59.000Z

199

Hot Springs Metropolitan Planning Organization 2030 Long Range Transportation Plan  

E-Print Network [OSTI]

Hot Springs Area Metropolitan Planning Organization 100 Broadway Terrace Hot Springs, Arkansas 71901 Adopted November 3, 2005 HSA-MPO 2030 LRTPii Participating Agencies Garland County Hot... Federal Highway Administration Federal Transit Administration 2030 Long Range Transportation Plan for the Hot Springs Area Metropolitan Planning Organization This LRTP has been funded with federal Metropolitan Planning (PL) funds through...

Hot Springs Metropolitan Planning Organization

2005-11-03T23:59:59.000Z

200

Deterministic Many-to-Many Hot Potato Routing Allan Borodin  

E-Print Network [OSTI]

Deterministic Many-to-Many Hot Potato Routing Allan Borodin Yuval Rabani Baruch Schieber Abstract We consider algorithms for many-to-many hot potato routing. In hot potato (deflection) routing in each time step. We consider a form of routing known as hot potato routing or deflection routing [1, 5

Borodin, Allan

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Occupational Hygiene & Chemical Safety Division Department of Environmental Health & Safety  

E-Print Network [OSTI]

Occupational Hygiene & Chemical Safety Division Department of Environmental Health & Safety Risk all connections and fittings prior to start of anesthesia. Carefully pour Isoflurane from Environmental Health & Safety before re-entering the laboratory. REFERENCES 1. Procedure

Machel, Hans

202

Safety Guidelines for Fieldwork Industrial Hygiene and Occupational Safety Department  

E-Print Network [OSTI]

Safety Guidelines for Fieldwork Industrial Hygiene and Occupational Safety Department Environmental Safety Division University of Georgia Adapted from the Safety Guidelines for Field Researchers published by the Office of Environment, Health & Safety at University of California, Berkeley #12;Safety Guidelines

Arnold, Jonathan

203

Center for Occupational and Environmental Health School of Public Health  

E-Print Network [OSTI]

. Such knowledge facilitates proper diagnosis, treatment, and prevention of chemical exposurerelated diseases Center for Occupational and Environmental Health School of Public Health University of chemicals and working towards greater collaboration with respect to sharing data and information

204

Operating Experience Level 3, DOE Occupational Radiation Exposures for 2013  

Broader source: Energy.gov [DOE]

This Operating Experience Level 3 (OE-3) document provides an overview summary of radiation doses from occupational exposures at the Department of Energy (DOE), including the National Nuclear Security Administration for the year 2013.

205

Occupational neurotoxicology of organic solvents and solvent mixtures  

SciTech Connect (OSTI)

The results of two field studies in painters and spray painters, the outcomes of examinations of workers with suspected work-related disease due to solvents, as well as data from an evaluation of an epidemiologic study in painters with confirmed occupational disease, are presented and discussed. The results of these studies and the experiences in occupational medicine in the Federal Republic of Germany do not support the assumption of high neurotoxic risks in solvent-exposed workers, which can be postulated from various epidemiologic studies from Scandinavian countries. Several factors may explain the different conclusions: (1) lower solvent exposures of German painters in the past decades; (2) false positive diagnosis of a toxic encephalopathy; (3) aetiological misclassification; (4) differences in legislation relevant for the acknowledgement of occupational diseases. In conclusion, there is a need for further well-designed epidemiologic studies in occupationally solvent-exposed workers. Suggestions regarding assessment of exposure and neurobehavioral tests are given.

Triebig, G. (Univ. of Heidelberg (Germany, F.R.))

1989-11-01T23:59:59.000Z

206

DOE occupational radiation exposure. Report 1992--1994  

SciTech Connect (OSTI)

The DOE Occupational Radiation Exposure Report, 1992-1994 reports occupational radiation exposures incurred by individuals at US Department of Energy (DOE) facilities from 1992 through 1994. This report includes occupational radiation exposure information for all DOE employees, contractors, subcontractors, and visitors. This information is analyzed and trended over time to provide a measure of the DOE`s performance in protecting its workers from radiation. Occupational radiation exposure at DOE has been decreasing over the past 5 years. In particular, doses in the higher dose ranges are decreasing, including the number of doses in excess of the DOE limits and doses in excess of the 2 rem Administrative Control Level (ACL). This is an indication of greater attention being given to protecting these individuals from radiation in the workplace.

NONE

1997-05-01T23:59:59.000Z

207

Occupational Safety and Health Administration and Department of Energy Voluntary Protection Program MOU  

Broader source: Energy.gov [DOE]

Occupational Safety and Health Administration and Department of Energy Voluntary Protection Program MOU

208

Occupational status orientations and perception of opportunity: A racial comparison of rural youth from depressed areas.  

E-Print Network [OSTI]

. Occupational Expectation Anticipatory Deflection Perception of Opportunity Conclusions 18 20 22 26 27 CHAPTER IV, METHOD AND PROCEDURES, ~ ~ . . ~ ~ ~ 30 Source and Collection of Data Negro-White Background Characteristics Instruments... Summary of Findings on Occupational Aspirations, Expectations and Anticipatory Deflection by Race 25 A Comparison Between Negro and White Youth on Occupational Aspirations 42 A Comparison Between Negro and White Youth on Occupational Aspiration...

Ameen, Bilquis Ara

1968-01-01T23:59:59.000Z

209

Division of Occupational Health & Safety/ORS NIH Safety Programs in Support of the  

E-Print Network [OSTI]

Division of Occupational Health & Safety/ORS NIH Safety Programs in Support of the NIH Animal Care and Use Program Occupational Safety and Health Protection for Federal Employees Poster NIH Safety Policies PM 1340 Occupational Safety and Health Management PM 1430 NIH Occupant Evacuation Plan PM 3015

Bandettini, Peter A.

210

Ambulatory infusion suite: pre- and post-occupancy evaluation  

E-Print Network [OSTI]

, London W1T 3JH, UK Building Research & Information Publication details, including instructions for authors and subscription information: http://www.tandfonline.com/loi/rbri20 Ambulatory infusion suite: pre- and post-occupancy evaluation Mardelle Mc... published: 08 Aug 2012. To cite this article: Mardelle McCuskey Shepley , Zofia Rybkowski , Jennifer Aliber & Cathleen Lange (2012): Ambulatory infusion suite: pre- and post-occupancy evaluation, Building Research & Information, 40:6, 700-712 To link...

Shepley, Mardelle McCuskey; Rybkowski, Zofia; Aliber, Jennifer; Lange, Cathleen

2015-02-08T23:59:59.000Z

211

Occupation number-based energy functional for nuclear masses  

E-Print Network [OSTI]

We develop an energy functional with shell-model occupations as the relevant degrees of freedom and compute nuclear masses across the nuclear chart. The functional is based on Hohenberg-Kohn theory with phenomenologically motivated terms. A global fit of the 17-parameter functional to nuclear masses yields a root-mean-square deviation of \\chi = 1.31 MeV. Nuclear radii are computed within a model that employs the resulting occupation numbers.

M. Bertolli; T. Papenbrock; S. Wild

2011-10-19T23:59:59.000Z

212

Occupational orientations of Mexican American youth in selected Texas counties  

E-Print Network [OSTI]

OCCUPATIONAL ORIENTATIONS OF MEXICAN AMERICAN YOU1'H IN SELECTED TEXAS COUNTIES A Thesis by DAVID E. WRIGHT, JR, Submitted to the Graduate College of the Texas ARM University in partial fulfillment of the requirements for the degree... of MASTER OF SCIENCE August 1968 Major Subject: Sociology OCCUPATIONAL ORIENTATIONS OF MEXICAN AMERICAN YOUTH IN SELECTED TEXAS COUNTIES A. Thesis by DAVID E. WRIGHT, JR. Approved as to style and oontent by: Chairman of' Committee . -e . ~ - c...

Wright, David Edgar

1968-01-01T23:59:59.000Z

213

ADVANCED HOT GAS FILTER DEVELOPMENT  

SciTech Connect (OSTI)

This report describes the fabrication and testing of continuous fiber ceramic composite (CFCC) based hot gas filters. The fabrication approach utilized a modified filament winding method that combined both continuous and chopped fibers into a novel microstructure. The work was divided into five primary tasks. In the first task, a preliminary set of compositions was fabricated in the form of open end tubes and characterized. The results of this task were used to identify the most promising compositions for sub-scale filter element fabrication and testing. In addition to laboratory measurements of permeability and strength, exposure testing in a coal combustion environment was performed to asses the thermo-chemical stability of the CFCC materials. Four candidate compositions were fabricated into sub-scale filter elements with integral flange and a closed end. Following the 250 hour exposure test in a circulating fluid bed combustor, the retained strength ranged from 70 t 145 percent of the as-fabricated strength. The post-test samples exhibited non-catastrophic failure behavior in contrast to the brittle failure exhibited by monolithic materials. Filter fabrication development continued in a filter improvement and cost reduction task that resulted in an improved fiber architecture, the production of a net shape flange, and an improved low cost bond. These modifications were incorporated into the process and used to fabricate 50 full-sized filter elements for testing in demonstration facilities in Karhula, Finland and at the Power Systems Development Facility (PSDF) in Wilsonville, AL. After 581 hours of testing in the Karhula facility, the elements retained approximately 87 percent of their as-fabricated strength. In addition, mechanical response testing at Virginia Tech provided a further demonstration of the high level of strain tolerance of the vacuum wound filter elements. Additional testing in the M. W. Kellogg unit at the PSDF has accumulated over 1800 hours of coal firing at temperatures of 760 C including a severe thermal upset that resulted in the failure of several monolithic oxide elements. No failures of any kind have been reported for the MTI CFCC elements in either of these test campaigns. Additional testing is planned at the M. W. Kellogg unit and Foster Wheeler unit at the PSDF over the next year in order to qualify for consideration for the Lakeland PCFB. Process scale-up issues have been identified and manufacturing plans are being evaluated to meet the needs of future demand.

RICHARD A. WAGNER

1998-09-04T23:59:59.000Z

214

Investigation of lane occupancy as a freeway control parameter for use during incident conditions  

E-Print Network [OSTI]

freeway safety warning device, using critical occupancy parameters, was developed and simulated in real-time. Evaluation of the simulated operation of the device revealed. that relia'cle detection of shock waves generated by freeway incidents... Detection of Shock Waves Page 38 Sensitivity of Occupancy Measurements 38 Occupancy Differential Concept Determination of' Occupancy D"' fzerence Parameters Det, ection of Shock Waves 41 RESULTS Critical Occupancy Concept Determination of Critical...

Friebele, John Duncan

1972-01-01T23:59:59.000Z

215

Air Conditioner Efficiency Under Hot Dry and Hot Humid Conditions - The Utility Perspective  

E-Print Network [OSTI]

Air Conditioner Efficiency under Hot Dry and Hot Humid Conditions - The Utility Perspective Ammi Amarnath Technical Leader, Energy Efficiency & Demand Response Program Electric Power Research Institute 3420 Hillview Avenue Palo Alto, CA... are summarized below. Recommendations ? Establish a utility and energy efficiency agency coordinating council for regional standards; ? Identify regional centers to provide the institutional support; ? Develop recommended best practices for regionally based...

Amarnath, A.

216

Hot Work Procedures The Hot Work reviewing process is established to prevent ignition of combustible and  

E-Print Network [OSTI]

Hot Work Procedures Purpose The Hot Work reviewing process is established to prevent ignition requirements when applicable: · Within 35 feet of work: o Remove combustible/flammable materials, dust, lint Eliminate explosive atmosphere. o Cover fixed combustibles with fire resistive covers, guards, or shields. o

de Lijser, Peter

217

Hot Water DJ: Saving Energy by Pre-mixing Hot Water Md Anindya Prodhan  

E-Print Network [OSTI]

Hot Water DJ: Saving Energy by Pre-mixing Hot Water Md Anindya Prodhan Department of Computer University of Virginia whitehouse@virginia.edu Abstract After space heating and cooling, water heating consumption. Current water heating systems waste up to 20% of their energy due to poor insulation in pipes

Whitehouse, Kamin

218

Halo occupation numbers and galaxy bias  

E-Print Network [OSTI]

We propose a heuristic model that displays the main features of realistic theories for galaxy bias. We show that the low-order clustering statistics of the dark-matter distribution depend almost entirely on the locations and density profiles of dark-matter haloes. A hypothetical galaxy catalogue depends on (i) the efficiency of galaxy formation, as manifested by the halo occupation number -- the number of galaxies brighter than some sample limit contained in a halo of a given mass; (ii) the location of these galaxies within their halo. The first factor is constrained by the empirical luminosity function of groups. For the second factor, we assume that one galaxy marks the halo centre, with any remaining galaxies acting as satellites that trace the halo mass. These simple assumptions amount to a recipe for non-local bias, in which the probability of finding a galaxy is not a simple function of its local mass density. We have applied this prescription to some CDM models of current interest, and find that the predictions are close to the observed galaxy correlations for a flat $\\Omega=0.3$ model ($\\Lambda$CDM), but not for an $\\Omega=1$ model with the same power spectrum ($\\tau$CDM). This is an inevitable consequence of cluster normalization for the power spectra: cluster-scale haloes of given mass have smaller core radii for high $\\Omega$, and hence display enhanced small-scale clustering. Finally, the pairwise velocity dispersion of galaxies in the $\\Lambda$CDM model is lower than that of the mass, allowing cluster-normalized models to yield a realistic Mach number for the peculiar velocity field. This is largely due to the strong variation of galaxy-formation efficiency with halo mass that is required in this model.

J. A. Peacock; R. E. Smith

2000-06-30T23:59:59.000Z

219

Extracting hot carriers from photoexcited semiconductor nanocrystals  

SciTech Connect (OSTI)

This research program addresses a fundamental question related to the use of nanomaterials in solar energy -- namely, whether semiconductor nanocrystals (NCs) can help surpass the efficiency limits, the so-called Shockley-Queisser limit, in conventional solar cells. In these cells, absorption of photons with energies above the semiconductor bandgap generates hot charge carriers that quickly cool to the band edges before they can be utilized to do work; this sets the solar cell efficiency at a limit of ~31%. If instead, all of the energy of the hot carriers could be captured, solar-to-electric power conversion efficiencies could be increased, theoretically, to as high as 66%. A potential route to capture this energy is to utilize semiconductor nanocrystals. In these materials, the quasi-continuous conduction and valence bands of the bulk semiconductor become discretized due to confinement of the charge carriers. Consequently, the energy spacing between the electronic levels can be much larger than the highest phonon frequency of the lattice, creating a phonon bottleneck wherein hot-carrier relaxation is possible via slower multiphonon emission. For example, hot-electron lifetimes as long as ~1 ns have been observed in NCs grown by molecular beam epitaxy. In colloidal NCs, long lifetimes have been demonstrated through careful design of the nanocrystal interfaces. Due to their ability to slow electronic relaxation, semiconductor NCs can in principle enable extraction of hot carriers before they cool to the band edges, leading to more efficient solar cells.

Zhu, Xiaoyang

2014-12-10T23:59:59.000Z

220

851 S.W. Sixth Avenue, Suite 1100 Telephone: 503-222-5161 Fax: 503-820-2370 Portland, Oregon 97204-1348 Toll free: 800-452-5161 Web site: www.nwcouncil.org  

E-Print Network [OSTI]

-1348 Toll free: 800-452-5161 Web site: www.nwcouncil.org JUDI DANIELSON CHAIR Idaho MELINDA S. EDEN VICE be found on the Council's web site www.nwcouncil.org . The Council invites comment on this issue paper

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Hot gas filter and system assembly  

DOE Patents [OSTI]

A filter element for separating fine dirty particles from a hot gas. The filter element comprises a first porous wall and a second porous wall. Each porous wall has an outer surface and an inner surface. The first and second porous walls being coupled together thereby forming a substantially closed figure and open at one end. The open end is formed to be coupled to a hot gas clean up system support structure. The first and second porous walls define a channel beginning at the open end and terminate at the closed end through which a filtered clean gas can flow through and out into the clean gas side of a hot gas clean up system.

Lippert, Thomas Edwin (Murrysville, PA); Palmer, Kathryn Miles (Monroeville, PA); Bruck, Gerald Joseph (Murrysville, PA); Alvin, Mary Anne (Pittsburgh, PA); Smeltzer, Eugene E. (Export, PA); Bachovchin, Dennis Michael (Murrysville, PA)

1999-01-01T23:59:59.000Z

222

Radioactive hot cell access hole decontamination machine  

DOE Patents [OSTI]

Radioactive hot cell access hole decontamination machine. A mobile housing has an opening large enough to encircle the access hole and has a shielding door, with a door opening and closing mechanism, for uncovering and covering the opening. The housing contains a shaft which has an apparatus for rotating the shaft and a device for independently translating the shaft from the housing through the opening and access hole into the hot cell chamber. A properly sized cylindrical pig containing wire brushes and cloth or other disks, with an arrangement for releasably attaching it to the end of the shaft, circumferentially cleans the access hole wall of radioactive contamination and thereafter detaches from the shaft to fall into the hot cell chamber.

Simpson, William E. (Richland, WA)

1982-01-01T23:59:59.000Z

223

Multi-cylinder hot gas engine  

DOE Patents [OSTI]

A multi-cylinder hot gas engine having an equal angle, V-shaped engine block in which two banks of parallel, equal length, equally sized cylinders are formed together with annular regenerator/cooler units surrounding each cylinder, and wherein the pistons are connected to a single crankshaft. The hot gas engine further includes an annular heater head disposed around a central circular combustor volume having a new balanced-flow hot-working-fluid manifold assembly that provides optimum balanced flow of the working fluid through the heater head working fluid passageways which are connected between each of the cylinders and their respective associated annular regenerator units. This balanced flow provides even heater head temperatures and, therefore, maximum average working fluid temperature for best operating efficiency with the use of a single crankshaft V-shaped engine block.

Corey, John A. (North Troy, NY)

1985-01-01T23:59:59.000Z

224

Hot gas filter and system assembly  

DOE Patents [OSTI]

A filter element is described for separating fine dirty particles from a hot gas. The filter element comprises a first porous wall and a second porous wall. Each porous wall has an outer surface and an inner surface. The first and second porous walls being coupled together thereby forming a substantially closed figure and open at one end. The open end is formed to be coupled to a hot gas clean up system support structure. The first and second porous walls define a channel beginning at the open end and terminate at the closed end through which a filtered clean gas can flow through and out into the clean gas side of a hot gas clean up system. 8 figs.

Lippert, T.E.; Palmer, K.M.; Bruck, G.J.; Alvin, M.A.; Smeltzer, E.E.; Bachovchin, D.M.

1999-08-31T23:59:59.000Z

225

Kepler constraints on planets near hot Jupiters  

SciTech Connect (OSTI)

We present the results of a search for planetary companions orbiting near hot Jupiter planet candidates (Jupiter-size candidates with orbital periods near 3 d) identified in the Kepler data through its sixth quarter of science operations. Special emphasis is given to companions between the 2:1 interior and exterior mean-motion resonances. A photometric transit search excludes companions with sizes ranging from roughly two-thirds to five times the size of the Earth, depending upon the noise properties of the target star. A search for dynamically induced deviations from a constant period (transit timing variations) also shows no significant signals. In contrast, comparison studies of warm Jupiters (with slightly larger orbits) and hot Neptune-size candidates do exhibit signatures of additional companions with these same tests. These differences between hot Jupiters and other planetary systems denote a distinctly different formation or dynamical history.

Steffen, Jason H.; /Fermilab; Ragozzine, Darin; /Harvard-Smithsonian Ctr. Astrophys.; Fabrycky, Daniel C.; /UC, Santa Cruz, Astron. Astrophys.; Carter, Joshua A.; /Harvard-Smithsonian Ctr. Astrophys.; Ford, Eric B.; /Florida U.; Holman, Matthew J.; /Harvard-Smithsonian Ctr. Astrophys.; Rowe, Jason F.; /NASA, Ames; Welsh, William F.; /San Diego State U., Astron. Dept.; Borucki, William J.; /NASA, Ames; Boss, Alan P.; /Carnegie Inst., Wash., D.C., DTM; Ciardi, David R.; /Caltech /Harvard-Smithsonian Ctr. Astrophys.

2012-05-01T23:59:59.000Z

226

Hot dry rock venture risks investigation:  

SciTech Connect (OSTI)

This study assesses a promising resource in central Utah as the potential site of a future commerical hot dry rock (HDR) facility for generating electricity. The results indicate that, if the HDR reservoir productivity equals expectations based on preliminary results from research projects to date, a 50 MWe HDR power facility at Roosevelt Hot Springs could generate power at cost competitive with coal-fired plants. However, it is imperative that the assumed productivity be demonstrated before funds are committed for a commercial facility. 72 refs., 39 figs., 38 tabs.

Not Available

1988-01-01T23:59:59.000Z

227

Texas Field Experiment Results: Performance of the Weatherization Assistance Program in Hot-Climate, Low-Income Homes  

SciTech Connect (OSTI)

A field test involving 35 houses was performed in Texas between 2000 and 2003 to study the response of low-income homes in hot climates to weatherization performed as part of the U.S Department of Energy Weatherization Assistance Program and to investigate certain methods to improve weatherization performance. The study found that improved Program designs and the use of advanced energy audits resulted in better weatherization measures being installed (use of blower doors to guide the infiltration work, more frequent installation of attic insulation, and installation of wall insulation) in the study homes, improved space-heating savings performance compared to the Program as implemented in the hot climates in 1989, and more comfortable indoor temperatures. Two key policy dilemmas for Texas and other hot-climate states were highlighted by the study; namely, how to balance expenditures between installing cost-effective weatherization measures and performing health, safety, and repair items, and that health, safety, and repair items can have an adverse impact on energy savings, which further complicates the weatherization decision process. Several occupant and equipment-related behaviors were observed in the field test homes that help explain why audits may over predict energy consumptions and savings and why air-conditioning electricity savings are difficult to measure. Based on this study, it is recommended that states in hot climates be encouraged to select from an expanded list of measures using advanced audits or other techniques, and further studies examining the benefits obtained from air conditioner measures should be performed. In addition, guidelines should be developed for the hot-climate states on how to (a) balance the objectives of saving energy, improving health and safety, and addressing repair issues, and (b) select repair items.

McCold, Lance Neil [ORNL; Goeltz, Rick [ORNL; Ternes, Mark P [ORNL; Berry, Linda G [ORNL

2008-04-01T23:59:59.000Z

228

Six Hot Topics in Planetary Astronomy  

E-Print Network [OSTI]

Six hot topics in modern planetary astronomy are described: 1) lightcurves and densities of small bodies 2) colors of Kuiper belt objects and the distribution of the ultrared matter 3) spectroscopy and the crystallinity of ice in the outer Solar system 4) irregular satellites of the giant planets 5) the Main Belt Comets and 6) comets and meteor stream parents.

David Jewitt

2008-11-14T23:59:59.000Z

229

Plasmas are Hot and Fusion is Cool  

SciTech Connect (OSTI)

Plasmas are Hot and Fusion is Cold. The DOE Princeton Plasma Physics Laboratory (PPPL) collaborates to develop fusion as a safe, clean and abundant energy source for the future. This video discusses PPPL's research and development on plasma, the fourth state of matter.

None

2011-01-01T23:59:59.000Z

230

Storage capacity in hot dry rock reservoirs  

DOE Patents [OSTI]

A method is described for extracting thermal energy, in a cyclic manner, from geologic strata which may be termed hot dry rock. A reservoir comprised of hot fractured rock is established and water or other liquid is passed through the reservoir. The water is heated by the hot rock, recovered from the reservoir, cooled by extraction of heat by means of heat exchange apparatus on the surface, and then re-injected into the reservoir to be heated again. Water is added to the reservoir by means of an injection well and recovered from the reservoir by means of a production well. Water is continuously provided to the reservoir and continuously withdrawn from the reservoir at two different flow rates, a base rate and a peak rate. Increasing water flow from the base rate to the peak rate is accomplished by rapidly decreasing backpressure at the outlet of the production well in order to meet periodic needs for amounts of thermal energy greater than a baseload amount, such as to generate additional electric power to meet peak demands. The rate of flow of water provided to the hot dry rock reservoir is maintained at a value effective to prevent depletion of the liquid inventory of the reservoir. 4 figs.

Brown, D.W.

1997-11-11T23:59:59.000Z

231

Transfer of hot dry rock technology  

SciTech Connect (OSTI)

The Hot Dry Rock Geothermal Energy Development Program has focused worldwide attention on the facts that natural heat in the upper part of the earth's crust is an essentially inexhaustible energy resource which is accessible almost everywhere, and that practical means now exist to extract useful heat from the hot rock and bring it to the earth's surface for beneficial use. The Hot Dry Rock Program has successfully constructed and operated a prototype hot, dry rock energy system that produced heat at the temperatures and rates required for large-scale space heating and many other direct uses of heat. The Program is now in the final stages of constructing a larger, hotter system potentially capable of satisfying the energy requirements of a small, commercial, electrical-generating power plant. To create and understand the behavior of such system, it has been necessary to develop or support the development of a wide variety of equipment, instruments, techniques, and analyses. Much of this innovative technology has already been transferred to the private sector and to other research and development programs, and more is continuously being made available as its usefulness is demonstrated. This report describes some of these developments and indicates where this new technology is being used or can be useful to industry, engineering, and science.

Smith, M.C.

1985-11-01T23:59:59.000Z

232

Hot topics in flavor physics at CDF  

SciTech Connect (OSTI)

Hot topics in flavor physics at CDF are reviewed. Selected results of top, beauty, charm physics and exotic states in about 200 pb{sup -1} data collected by the CDF II detector in p{bar p} collisions at {radical}s = 1.96 TeV at the Fermilab Tevatron are presented.

Jun, Soon Yung; /Carnegie Mellon U.

2005-01-01T23:59:59.000Z

233

Sustainable Energy without the hot air  

E-Print Network [OSTI]

Sustainable Energy without the hot air Further notes David J.C. MacKay Draft 1.9.3 December 20, 2007 Department of Physics University of Cambridge http://www.withouthotair.com/ http://www.inference.phy.cam.ac.uk, and mythconceptions . . . 30 3 Sequestration . . . . . . . . . . . . . . . . . . . . . . 32 4 Bio-nano-solar

MacKay, David J.C.

234

Storage capacity in hot dry rock reservoirs  

DOE Patents [OSTI]

A method of extracting thermal energy, in a cyclic manner, from geologic strata which may be termed hot dry rock. A reservoir comprised of hot fractured rock is established and water or other liquid is passed through the reservoir. The water is heated by the hot rock, recovered from the reservoir, cooled by extraction of heat by means of heat exchange apparatus on the surface, and then re-injected into the reservoir to be heated again. Water is added to the reservoir by means of an injection well and recovered from the reservoir by means of a production well. Water is continuously provided to the reservoir and continuously withdrawn from the reservoir at two different flow rates, a base rate and a peak rate. Increasing water flow from the base rate to the peak rate is accomplished by rapidly decreasing backpressure at the outlet of the production well in order to meet periodic needs for amounts of thermal energy greater than a baseload amount, such as to generate additional electric power to meet peak demands. The rate of flow of water provided to the hot dry rock reservoir is maintained at a value effective to prevent depletion of the liquid

Brown, Donald W. (Los Alamos, NM)

1997-01-01T23:59:59.000Z

235

Hot-dry-rock geothermal resource 1980  

SciTech Connect (OSTI)

The work performed on hot dry rock (HDR) geothermal resource evaluation, site characterization, and geophysical exploration techniques is summarized. The work was done by region (Far West, Pacific Northwest, Southwest, Rocky Mountain States, Midcontinent, and Eastern) and limited to the conterminous US.

Heiken, G.; Goff, F.; Cremer, G. (ed.)

1982-04-01T23:59:59.000Z

236

Occupational health and environment research 1983: Health, Safety, and Environment Division. Progress report  

SciTech Connect (OSTI)

The primary responsibility of the Health, Safety, and Environment (HSE) Division at the Los Alamos National Laboratory is to provide comprehensive occupational health and safety programs, waste processing, and environmental protection. These activities are designed to protect the workers, the public, and the environment. Evaluation of respiratory protective equipment included the XM-30 and M17A1 military masks, use of MAG-1 spectacles in respirators, and eight self-contained units. The latter units were used in an evaluation of test procedures used for Bureau of Mines approval of breathing apparatuses. Analyses of air samples from field studies of a modified in situ oil shale retorting facility were performed for total cyclohexane extractables and selected polynuclear aromatic hydrocarbons. Aerosols generation and characterization of effluents from oil shale processing were continued as part of an inhalation toxicology study. Additional data on plutonium excretion in urine are presented and point up problems in using the Langham equation to predict plutonium deposition in the body from long-term excretion data. Environmental surveillance at Los Alamos during 1983 showed the highest estimated radiation dose from Laboratory operations to be about 26% of the natural background radiation dose. Several studies on radionuclides and their transport in the Los Alamos environment are described. The chemical quality of surface and ground water near the geothermal hot dry rock facility is described. Short- and long-term consequences to man from releases of radionuclides into the environment can be simulated by the BIOTRAN computer model, which is discussed brirfly.

Voelz, G.L. (comp.)

1985-05-01T23:59:59.000Z

237

Functional Toll-like receptor 4 expressed in lactotrophs mediates LPS-induced proliferation in experimental pituitary hyperplasia  

SciTech Connect (OSTI)

Toll like receptor 4 (TLR4) has been characterized for its ability to recognize bacterial endotoxin lipopolysaccharide (LPS). Considering that infections or inflammatory processes might contribute to the progression of pituitary tumors, we analyzed the TLR4 functional role by evaluating the LPS effect on lactotroph proliferation in primary cultures from experimental pituitary tumors, and examined the involvement of PI3K-Akt and NF-?B activation in this effect. In addition, the role of 17?-estradiol as a possible modulator of LPS-induced PRL cell proliferation was further investigated. In estrogen-induced hyperplasic pituitaries, LPS triggered lactotroph cell proliferation. However, endotoxin failed to increase the number of lactotrophs taking up BrdU in normal pituitaries. Moreover, incubation with anti-TLR4 antibody significantly reduced LPS-induced lactotroph proliferation, suggesting a functional role of this receptor. As a sign of TLR4 activation, an LPS challenge increased IL-6 release in normal and tumoral cells. By flow cytometry, TLR4 baseline expression was revealed at the plasma membrane of tumoral lactotrophs, without changes noted in the percentage of double PRL/TLR4 positive cells after LPS stimulus. Increases in TLR4 intracellular expression were detected as well as rises in CD14, p-Akt and NF-?B after an LPS challenge, as assessed by western blotting. The TLR4/PRL and PRL/NF-?B co-localization was also corroborated by immunofluorescence and the involvement of PI3K/Akt signaling in lactotroph proliferation and IL-6 release was revealed through the PI3K inhibitor Ly-294002. In addition, 17?-estradiol attenuated the LPS-evoked increase in tumoral lactotroph proliferation and IL-6 release. Collectively these results demonstrate the presence of functional TLR4 in lactotrophs from estrogen-induced hyperplasic pituitaries, which responded to the proliferative stimulation and IL-6 release induced by LPS through TLR4/CD14, with a contribution of the PI3K-Akt and NF-?B signaling pathways. - Highlights: In hyperplastic pituitaries, LPS triggered the lactotroph cell proliferation and IL-6 release. Functional Toll-like receptor 4 (TLR4) is expressed at the plasma membrane of tumoral lactotrophs. Increases in TLR4 and CD14 intracellular expression levels were detected after an LPS challenge. The proliferative stimulation and IL-6 release involved the PI3K-Akt pathway and NF-?B activation. 17?-estradiol attenuated the LPS-evoked tumoral lactotroph proliferation and IL-6 secretion.

Sabatino, Mara Eugenia; Sosa, Liliana del Valle; Petiti, Juan Pablo; Mukdsi, Jorge Humberto [Centro de Microscopa Electrnica, Instituto de Investigaciones en Ciencias de la Salud (INICSA-CONICET), Facultad de Ciencias Mdicas, Universidad Nacional de Crdoba, Av. Enrique Barros y Enfermera Gordillo, Ciudad Universitaria, CP 5000, Crdoba (Argentina); Mascanfroni, Ivn Daro; Pellizas, Claudia Gabriela [Centro de Investigaciones en Bioqumica Clnica e Inmunologa (CIBICI-CONICET), Facultad de Ciencias Qumicas, Universidad Nacional de Crdoba, Av. Haya de la Torre y Medina Allende, Ciudad Universitaria, CP 5000, Crdoba (Argentina); Gutirrez, Silvina; Torres, Alicia Ins [Centro de Microscopa Electrnica, Instituto de Investigaciones en Ciencias de la Salud (INICSA-CONICET), Facultad de Ciencias Mdicas, Universidad Nacional de Crdoba, Av. Enrique Barros y Enfermera Gordillo, Ciudad Universitaria, CP 5000, Crdoba (Argentina); De Paul, Ana Luca, E-mail: adepaul@cmefcm.uncor.edu [Centro de Microscopa Electrnica, Instituto de Investigaciones en Ciencias de la Salud (INICSA-CONICET), Facultad de Ciencias Mdicas, Universidad Nacional de Crdoba, Av. Enrique Barros y Enfermera Gordillo, Ciudad Universitaria, CP 5000, Crdoba (Argentina)

2013-11-15T23:59:59.000Z

238

Insulation of Pipe Bends Improves Efficiency of Hot Oil Furnaces  

E-Print Network [OSTI]

Thermodynamic analyses of processes indicated low furnace efficiencies on certain hot oil furnaces. Further investigation, which included Infrared (IR) thermography testing of several furnaces, identified extremely hot surfaces on the outside...

Haseltine, D. M.; Laffitte, R. D.

239

Sun-Sentinel Red hot email heats up Wasserman Schultz,  

E-Print Network [OSTI]

Sun-Sentinel Red hot email heats up Wasserman Schultz, West rift South Florida members of Congress take feud public July 20, 2011|By Anthony Man, Sun Sentinel Congressman Allen West's red hot response

Belogay, Eugene A.

240

Solar Hot Water Creates Savings for Homeless Shelters | Department...  

Broader source: Energy.gov (indexed) [DOE]

Solar Hot Water Creates Savings for Homeless Shelters Solar Hot Water Creates Savings for Homeless Shelters July 15, 2010 - 12:10pm Addthis Kevin Craft What are the key facts?...

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Microwave vs. Electric Kettle: Which Appliance Is in Hot Water...  

Energy Savers [EERE]

Microwave vs. Electric Kettle: Which Appliance Is in Hot Water in EnergyFaceoff Round 4? Microwave vs. Electric Kettle: Which Appliance Is in Hot Water in EnergyFaceoff Round 4?...

242

Hot Water Heating System Operation and Energy Conservation  

E-Print Network [OSTI]

Based on an example of the reconstruction of a hot water heating system, this paper provides an analysis and comparison of the operations of hot water heating systems, including supply water temperature adjustment, flow adjustment during each...

Shao, Z.; Chen, H.; Wei, P.

2006-01-01T23:59:59.000Z

243

Cuttings Analysis At Roosevelt Hot Springs Area (Christensen...  

Open Energy Info (EERE)

navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Cuttings Analysis At Roosevelt Hot Springs Area (Christensen, Et Al., 1983) Exploration Activity...

244

OptimizingResourceUtilizationandTestability Using Hot Potato Techniques  

E-Print Network [OSTI]

OptimizingResourceUtilizationandTestability Using Hot Potato Techniques Miodrag Potkonjak Sujit Dey C&C Research Laboratories, NEC USA, Princeton, NJ 08540 ABSTRACT This paper introduces hot potato reduced using new technique. It is also dem- onstrated how hot potato techniques can be effectively used

Potkonjak, Miodrag

245

STATE OF CALIFORNIA SOLAR DOMESTIC HOT WATER SYSTEMS (SDHW)  

E-Print Network [OSTI]

STATE OF CALIFORNIA SOLAR DOMESTIC HOT WATER SYSTEMS (SDHW) CEC- CF-6R-MECH-02 (Revised 08/09) CALIFORNIA ENERGY COMMISSION INSTALLATION CERTIFICATE CF-6R-MECH-02 Solar Domestic Hot Water Systems (SDHW OF CALIFORNIA SOLAR DOMESTIC HOT WATER SYSTEMS (SDHW) CEC- CF-6R-MECH-02 (Revised 08/09) CALIFORNIA ENERGY

246

Ph. D. Major in Occupational Safety and Health Rev 10/18/2005  

E-Print Network [OSTI]

in the application of scientific principles to anticipate, recognize, evaluate, control and manage occupational Energy Technology Laboratory in Morgantown and Pittsburgh and the Institute for Occupational research 5. Toxicology 6. Industrial hygiene including ventilation 7. Engineering control technology 8

Mohaghegh, Shahab

247

Growing a green job : essays on social movements and the emergence of a new occupation  

E-Print Network [OSTI]

Professions and occupations play a central role in shaping institutional arrangements, organizational forms, and individual organizations. I argue the emergence and development of new occupations should be among the central ...

Hammond, Ryan Alan

2012-01-01T23:59:59.000Z

248

Zoning and occupancy-moderation for residential space-conditioning under demand-driven electricity pricing  

E-Print Network [OSTI]

Occupancy-moderated zonal space-conditioning (OZS) refers to the partitioning of a residence into different zones and independently operating the space-conditioning equipment of each zone based on its occupancy. OZS remains ...

Leow, Woei Ling, 1977-

2012-01-01T23:59:59.000Z

249

CRAD, Occupational Safety & Health- Idaho MF-628 Drum Treatment Facility  

Broader source: Energy.gov [DOE]

A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) used for a February 2006 Commencement of Operations assessment of the Occupational Safety and Industrial Hygiene programs at the MF-628 Drum Treatment Facility at the Idaho National Laboratory Advanced Mixed Waste Treatment Project.

250

Occupational exposure to DDT among mosquito control sprayers  

SciTech Connect (OSTI)

DDT, a broad action insecticide whose use is restricted or banned in most industrialized countries is still often used for vector control in many tropical and developing countries. Despite the fact that DDT is accumulative and persistant in the ecosystem use of such substitutes as malathion or propoxur is not popular because these increases costs by 3.4 to 8.5 fold. As such DDT is economically attractive to poorer countries. As far as can be ascertained no systemic poisoning has resulted from occupational exposure to DDT. Due to the large particle size, the amount of DDT inhaled by workers is far less than the amount reaching exposed portions of skin. As such occupational exposure is mainly dermal or tropical. Occupational exposure to DDT studies have been done before. The present study is an analysis of some characteristics, (i.e. age, body size, relationship between plasma vitamin A and DDE levels, and smoking habits), of occupational exposure to DDT among spraymen in a Zimbabwe population.

Nhachi, C.F.B.; Kasilo, O.J. (Univ. of Zimbabwe, Harare (Zimbabwe))

1990-08-01T23:59:59.000Z

251

Reducing Occupant-Controlled Electricity Consumption in Campus Buildings  

E-Print Network [OSTI]

2010 Reducing Occupant-Controlled Electricity Consumption in Campus Buildings Kill­09 and is expected to spend more than $17.1 million in 2009­10. In an effort to reduce electricity consumption; 1 EXECUTIVE SUMMARY UC Berkeley spent $16.39 million on purchased electricity in 2008

Doudna, Jennifer A.

252

NIH POLICY MANUAL 1340 -NIH Occupational Safety and Health Management  

E-Print Network [OSTI]

NIH POLICY MANUAL 1340 - NIH Occupational Safety and Health Management Issuing Office: ORS the responsibilities of NIH personnel to foster a safe work environment. 2. Filing Instructions: Remove: NIH Manual 1340, dated 11/29/96 Insert: NIH Manual Chapter 1340 dated 2/27/06 PLEASE NOTE: For information on

Bandettini, Peter A.

253

Occupancy Based Demand Response HVAC Control Strategy Varick L. Erickson  

E-Print Network [OSTI]

Occupancy Based Demand Response HVAC Control Strategy Varick L. Erickson University of California an efficient demand response HVAC control strategy, actual room usage must be considered. Temperature and CO2 are used for simulations but not for predictive demand response strategies. In this paper, we develop

Cerpa, Alberto E.

254

DOE Basic Overview of Occupational Radiation Exposure_2011 pamphlet  

SciTech Connect (OSTI)

This pamphlet focusses on two HSS activities that help ensure radiation exposures are accurately assessed and recorded, namely: 1) the quality and accuracy of occupational radiation exposure monitoring, and 2) the recording, reporting, analysis, and dissemination of the monitoring results. It is intended to provide a short summary of two specific HSS programs that aid in the oversight of radiation protection activities at DOE. The Department of Energy Laboratory Accreditation Program (DOELAP) is in place to ensure that radiation exposure monitoring at all DOE sites is precise and accurate, and conforms to national and international performance and quality assurance standards. The DOE Radiation Exposure Monitoring Systems (REMS) program provides for the collection, analysis, and dissemination of occupational radiation exposure information. The annual REMS report is a valuable tool for managing radiological safety programs and for developing policies to protect individuals from occupational exposure to radiation. In tandem, these programs provide DOE management and workers an assurance that occupational radiation exposures are accurately measured, analyzed, and reported.

ORAU

2012-08-08T23:59:59.000Z

255

CRAD, Occupational Safety & Health- Idaho Accelerated Retrieval Project Phase II  

Broader source: Energy.gov [DOE]

A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) used for a February 2006 Commencement of Operations assessment of the Occupational Safety and Industrial Hygiene Program at the Idaho Accelerated Retrieval Project Phase II.

256

Forecasting Building Occupancy Using Sensor Network James Howard  

E-Print Network [OSTI]

of the forecasting algorithm for the different conditions. 1. INTRODUCTION According to the U.S. Department of Energy could take advantage of times when electricity cost is lower, to chill a cold water storage tankForecasting Building Occupancy Using Sensor Network Data James Howard Colorado School of Mines

Hoff, William A.

257

A Qualitative Understanding of Occupational Engagement in College Students  

E-Print Network [OSTI]

that contribute to the decision-maker's fund of information and experience of the larger world, not just the world as processed when a career decision is imminent" (Krieshok, Black, & McKay, 2009, p. 284). The Occupational Engagement Scale - Student, OES-S (Cox...

Bjornsen, Abby Lea

2010-05-16T23:59:59.000Z

258

Energy Savings for Occupancy-Based Control (OBC) of Variable-Air-Volume (VAV) Systems  

SciTech Connect (OSTI)

This study evaluates the savings potential of occupancy based control (OBC) for large office buildings with VAV terminal boxes installed.

Zhang, Jian; Lutes, Robert G.; Liu, Guopeng; Brambley, Michael R.

2013-01-24T23:59:59.000Z

259

Enabling Technologies for Ceramic Hot Section Components  

SciTech Connect (OSTI)

Silicon-based ceramics are attractive materials for use in gas turbine engine hot sections due to their high temperature mechanical and physical properties as well as lower density than metals. The advantages of utilizing ceramic hot section components include weight reduction, and improved efficiency as well as enhanced power output and lower emissions as a result of reducing or eliminating cooling. Potential gas turbine ceramic components for industrial, commercial and/or military high temperature turbine applications include combustor liners, vanes, rotors, and shrouds. These components require materials that can withstand high temperatures and pressures for long duration under steam-rich environments. For Navy applications, ceramic hot section components have the potential to increase the operation range. The amount of weight reduced by utilizing a lighter gas turbine can be used to increase fuel storage capacity while a more efficient gas turbine consumes less fuel. Both improvements enable a longer operation range for Navy ships and aircraft. Ceramic hot section components will also be beneficial to the Navy's Growth Joint Strike Fighter (JSF) and VAATE (Versatile Affordable Advanced Turbine Engines) initiatives in terms of reduced weight, cooling air savings, and capability/cost index (CCI). For DOE applications, ceramic hot section components provide an avenue to achieve low emissions while improving efficiency. Combustors made of ceramic material can withstand higher wall temperatures and require less cooling air. Ability of the ceramics to withstand high temperatures enables novel combustor designs that have reduced NO{sub x}, smoke and CO levels. In the turbine section, ceramic vanes and blades do not require sophisticated cooling schemes currently used for metal components. The saved cooling air could be used to further improve efficiency and power output. The objectives of this contract were to develop technologies critical for ceramic hot section components for gas turbine engines. Significant technical progress has been made towards maturation of the EBC and CMC technologies for incorporation into gas turbine engine hot-section. Promising EBC candidates for longer life and/or higher temperature applications relative to current state of the art BSAS-based EBCs have been identified. These next generation coating systems have been scaled-up from coupons to components and are currently being field tested in Solar Centaur 50S engine. CMC combustor liners were designed, fabricated and tested in a FT8 sector rig to demonstrate the benefits of a high temperature material system. Pretest predictions made through the use of perfectly stirred reactor models showed a 2-3x benefit in CO emissions for CMC versus metallic liners. The sector-rig test validated the pretest predictions with >2x benefit in CO at the same NOx levels at various load conditions. The CMC liners also survived several trip shut downs thereby validating the CMC design methodology. Significant technical progress has been made towards incorporation of ceramic matrix composites (CMC) and environmental barrier coatings (EBC) technologies into gas turbine engine hot-section. The second phase of the program focused on the demonstration of a reverse flow annular CMC combustor. This has included overcoming the challenges of design and fabrication of CMCs into 'complex' shapes; developing processing to apply EBCs to 'engine hardware'; testing of an advanced combustor enabled by CMCs in a PW206 rig; and the validation of performance benefits against a metal baseline. The rig test validated many of the pretest predictions with a 40-50% reduction in pattern factor compared to the baseline and reductions in NOx levels at maximum power conditions. The next steps are to develop an understanding of the life limiting mechanisms in EBC and CMC materials, developing a design system for EBC coated CMCs and durability testing in an engine environment.

Venkat Vedula; Tania Bhatia

2009-04-30T23:59:59.000Z

260

Hot clamp design for LMFBR piping systems  

SciTech Connect (OSTI)

Thin-wall, large-diameter piping for liquid metal fast breeder reactor (LMFBR) plants can be subjected to significant thermal transients during reactor scrams. To reduce local thermal stresses, an insulated cold clamp was designed for the fast flux test facility and was also applied to some prototype reactors thereafter. However, the cost minimization of LMFBR requires much simpler designs. This paper presents a hot clamp design concept, which uses standard clamp halves directly attached to the pipe surface leaving an initial gap. Combinations of flexible pipe and rigid clamp achieved a self-control effect on clamp-induced pipe stresses due to the initial gap. A 3-D contact and inelastic history analysis were performed to verify the hot clamp concept. Considerations to reduce the initial stress at installation, to mitigate the clamp restraint on the pipe expansion during thermal shocks, and to maintain the pipe-clamp stiffness desired during a seismic event were discussed.

Kobayashi, T.; Tateishi, M. (Nippon MARC Co., Ltd., Tokyo (Japan))

1993-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Turbodrilling in the hot-hole environment  

SciTech Connect (OSTI)

Historically, geothermal and other types of hot-hole drilling have presented what seemed to be insurmountable barriers to efficient and extended use of downhole drilling motors, particularly those containing elastomeric bearing or motor components. Typical temperatures of 350 to 700/sup 0/F (177 to 371/sup 0/C) damage the elastomers and create other operating problems, reducing the life of the motors and their ability to drill efficiently. Recent innovations in turbodrill design have opened heretofore unrealized potentials and have allowed, for the first time, extended downhole drilling time in hot-hole conditions. The unique feature of this turbodrill is the lack of any elastomers or other temperature-sensitive materials. Its capabilities are matched closely to the requirements of drilling in elevated-temperature environments. The bearing assembly can withstand conditions encountered in typical geothermal formations and provides the performance necessary to stay in the hole. The result is increased rate of penetration (ROP) and more economical drilling.

Herbert, P.

1982-10-01T23:59:59.000Z

262

Colorado's Hot Springs | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDITOhioOglesby,Sullivan,Information FeedColombia: Energy7 March, 2013 -Hot

263

A New Method for Occupancy Grid Maps Merging: Application to Multi-vehicle Cooperative Local  

E-Print Network [OSTI]

A New Method for Occupancy Grid Maps Merging: Application to Multi-vehicle Cooperative Local that are challenging for a single vehicle system. In this paper, a new method for occupancy grid maps merging the proposed occupancy grid maps merging method is also introduced. Real-data tests are given to demonstrate

Paris-Sud XI, Universit de

264

High temperature hot water distribution system study  

SciTech Connect (OSTI)

The existing High Temperature Hot Water (HTHW) Distribution System has been plagued with design and construction deficiencies since startup of the HTHW system, in October 1988. In October 1989, after one year of service, these deficiencies were outlined in a technical evaluation. The deficiencies included flooded manholes, sump pumps not hooked up, leaking valves, contaminated HTHW water, and no cathodic protection system. This feasibility study of the High Temperature Hot Water (HTHW) Distribution System was performed under Contract No. DACA0l-94-D-0033, Delivery Order 0013, Modification 1, issued to EMC Engineers, Inc. (EMC), by the Norfolk District Corps of Engineers, on 25 April 1996. The purpose of this study was to determine the existing conditions of the High Temperature Hot Water Distribution System, manholes, and areas of containment system degradation. The study focused on two areas of concern, as follows: * Determine existing conditions and areas of containment system degradation (leaks) in the underground carrier pipes and protective conduit. * Document the condition of underground steel and concrete manholes. To document the leaks, a site survey was performed, using state-of-the-art infrared leak detection equipment and tracer gas leak detection equipment. To document the condition of the manholes, color photographs were taken of the insides of 125 manholes, and notes were made on the condition of these manholes.

NONE

1996-12-01T23:59:59.000Z

265

Hot Stars: Old-Fashioned or Trendy?  

E-Print Network [OSTI]

Spectroscopic analyses with the intention of the interpretation of the UV-spectra of the brightest stars as individuals - supernovae - or as components of star-forming regions - massive O stars - provide a powerful tool with great astrophysical potential for the determination of extragalactic distances and of the chemical composition of star-forming galaxies even at high redshifts. The perspectives of already initiated work with the new generation of tools for quantitative UV-spectroscopy of Hot Stars that have been developed during the last two decades are presented and the status of the continuing effort to construct corresponding models for Hot Star atmospheres is reviewed. Because the physics of the atmospheres of Hot Stars are strongly affected by velocity expansion dominating the spectra at all wavelength ranges, hydrodynamic model atmospheres for O-type stars and explosion models for Supernovae of Type Ia are necessary as basis for the synthesis and analysis of the spectra. It is shown that stellar parameters, abundances and stellar wind properties can be determined by the methods of spectral diagnostics already developed. Additionally, it will be demonstrated that models and synthetic spectra of Type Ia Supernovae of required quality are already available that make it possible to tackle the question of whether Supernovae Ia are standard candles in a cosmological sense and the SN-luminosity distances thus indicate accelerated expansion of the universe.

A. W. A. Pauldrach

2003-01-16T23:59:59.000Z

266

Hot filament CVD of boron nitride films  

DOE Patents [OSTI]

Using a hot filament (.apprxeq.1400.degree. C.) to activate borazine (B.sub.3 N.sub.3 H.sub.6) molecules for subsequent reaction with a direct line-of-sight substrate, transparent boron ntiride films as thick as 25,000 angstroms are grown for a substrate temperature as low as 100.degree. C. The minimum temperature is determined by radiative heating from the adjacent hot filament. The low temperature BN films show no indication of crystallinity with X-ray diffraction (XRD). X-ray photoelectron spectra (XPS) show the films to have a B:N ratio of 0.97:1 with no other XPS detectable impurities above the 0.5% level. Both Raman and infrared (IR) spectroscopy are characteristic of h-BN with small amounts of hydrogen detected as N-H and B-H bands in the IR spectrum. An important feature of this method is the separation and localization of the thermal activation step at the hot filament from the surface reaction and film growth steps at the substrate surface. This allows both higher temperature thermal activation and lower temperature film growth.

Rye, Robert R. (Albuquerque, NM)

1992-01-01T23:59:59.000Z

267

Hot Dry Rock Geothermal Energy Development Program  

SciTech Connect (OSTI)

During Fiscal Year 1987, emphasis in the Hot Dry Rock Geothermal Energy Development Program was on preparations for a Long-Term Flow Test'' of the Phase II'' or Engineering'' hot dry rock energy system at Fenton Hill, New Mexico. A successful 30-day flow test of the system during FY86 indicated that such a system would produce heat at a temperature and rate that could support operation of a commercial electrical power plant. However, it did not answer certain questions basic to the economics of long-term operation, including the rate of depletion of the thermal reservoir, the rate of water loss from the system, and the possibility of operating problems during extended continuous operation. Preparations for a one-year flow test of the system to answer these and more fundamental questions concerning hot dry rock systems were made in FY87: design of the required surface facilities; procurement and installation of some of their components; development and testing of slimline logging tools for use through small-diameter production tubing; research on temperature-sensitive reactive chemical tracers to monitor thermal depletion of the reservoir; and computer simulations of the 30-day test, extended to modeling the planned Long-Term Flow Test. 45 refs., 34 figs., 5 tabs.

Smith, M.C.; Hendron, R.H.; Murphy, H.D.; Wilson, M.G.

1989-12-01T23:59:59.000Z

268

Sol Duc Hot Springs feasibility study  

SciTech Connect (OSTI)

Sol Duc Springs is located in the Olympic National Park in western Washington state. Since the turn of the century, the area has served as a resort, offering hot mineral baths, lodge and overnight cabin accommodations. The Park Service, in conjunction with the concessionaire, is in the process of renovating the existing facilities, most of which are approximately 50 years old. The present renovation work consists of removing all of the existing cabins and replacing them with 36 new units. In addition, a new hot pool is planned to replace the existing one. This report explores the possibility of a more efficient use of the geothermal resource to accompany other planned improvements. It is important to note that the system outlined is based upon the resource development as it exists currently. That is, the geothermal source is considered to be: the two existing wells and the hot springs currently in use. In addition, every effort has been made to accommodate the priorities for utilization as set forth by the Park Service.

Not Available

1981-12-01T23:59:59.000Z

269

Water and Energy Savings using Demand Hot Water Recirculating Systems in Residential Homes: A Case Study of Five Homes in Palo Alto, California  

SciTech Connect (OSTI)

This report summarizes a preliminary study aimed at estimating the potential of saving potable water, (and the electrical energy used to heat it), that is presently lost directly to the drain while occupants wait for hot water to arrive at the faucet (point of use). Data were collected from five single-family homes in Palo Alto, California. Despite the small sample size in this study, the results make a compelling case for retrofitting homes with hot water recirculation systems to eliminate unnecessary wastage of water at the point of use. Technical as well as behavioral and attitudinal changes towards water conservation are necessary for a fulfilling and successful conservation effort. This report focuses on the technical issues, but behavioral issues are also noted, which may be factored into future studies involving local and state governments and utility companies.

Ally, M.R.

2002-11-14T23:59:59.000Z

270

High glucose induces inflammatory cytokine through protein kinase C-induced toll-like receptor 2 pathway in gingival fibroblasts  

SciTech Connect (OSTI)

Highlights: Black-Right-Pointing-Pointer High glucose significantly induced TLR2 expression in gingival fibroblasts. Black-Right-Pointing-Pointer High glucose increased NF-{kappa}B p65 nuclear activity, IL-1{beta} and TNF-{alpha} levels. Black-Right-Pointing-Pointer PKC-{alpha}/{delta}-TLR2 pathway is involved in periodontal inflammation under high glucose. -- Abstract: Toll-like receptors (TLRs) play a key role in innate immune response and inflammation, especially in periodontitis. Meanwhile, hyperglycemia can induce inflammation in diabetes complications. However, the activity of TLRs in periodontitis complicated with hyperglycemia is still unclear. In the present study, high glucose (25 mmol/l) significantly induced TLR2 expression in gingival fibroblasts (p < 0.05). Also, high glucose increased nuclear factor kappa B (NF-{kappa}B) p65 nuclear activity, tumor necrosis factor-{alpha} (TNF-{alpha}) and interleukin-l{beta} (IL-1{beta}) levels. Protein kinase C (PKC)-{alpha} and {delta} knockdown with siRNA significantly decreased TLR2 and NF-{kappa}B p65 expression (p < 0.05), whereas inhibition of PKC-{beta} had no effect on TLR2 and NF-{kappa}B p65 under high glucose (p < 0.05). Additional studies revealed that TLR2 knockdown significantly abrogated high-glucose-induced NF-{kappa}B expression and inflammatory cytokine secretion. Collectively, these data suggest that high glucose stimulates TNF-{alpha} and IL-1{beta} secretion via inducing TLR2 through PKC-{alpha} and PKC-{delta} in human gingival fibroblasts.

Jiang, Shao-Yun, E-mail: jiangshaoyun@yahoo.com [School of Dentistry, Tianjin Medical University, 12 Qi Xiang Tai Street, Heping District, Tianjin 300070 (China)] [School of Dentistry, Tianjin Medical University, 12 Qi Xiang Tai Street, Heping District, Tianjin 300070 (China); Wei, Cong-Cong; Shang, Ting-Ting; Lian, Qi; Wu, Chen-Xuan [School of Dentistry, Tianjin Medical University, 12 Qi Xiang Tai Street, Heping District, Tianjin 300070 (China)] [School of Dentistry, Tianjin Medical University, 12 Qi Xiang Tai Street, Heping District, Tianjin 300070 (China); Deng, Jia-Yin, E-mail: yazhou2991@126.com [School of Dentistry, Tianjin Medical University, 12 Qi Xiang Tai Street, Heping District, Tianjin 300070 (China)] [School of Dentistry, Tianjin Medical University, 12 Qi Xiang Tai Street, Heping District, Tianjin 300070 (China)

2012-10-26T23:59:59.000Z

271

ANNUAL DOE OCCUPATIONAL RADIATION EXPOSURE | 2013 REPORT | Department of  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energyon ArmedWaste and Materials2014Energy ANNUAL DOE OCCUPATIONAL RADIATION EXPOSURE |

272

Automated inspection of hot steel slabs  

DOE Patents [OSTI]

The disclosure relates to a real time digital image enhancement system for performing the image enhancement segmentation processing required for a real time automated system for detecting and classifying surface imperfections in hot steel slabs. The system provides for simultaneous execution of edge detection processing and intensity threshold processing in parallel on the same image data produced by a sensor device such as a scanning camera. The results of each process are utilized to validate the results of the other process and a resulting image is generated that contains only corresponding segmentation that is produced by both processes.

Martin, Ronald J. (Burnsville, MN)

1985-01-01T23:59:59.000Z

273

Automated inspection of hot steel slabs  

DOE Patents [OSTI]

The disclosure relates to a real time digital image enhancement system for performing the image enhancement segmentation processing required for a real time automated system for detecting and classifying surface imperfections in hot steel slabs. The system provides for simultaneous execution of edge detection processing and intensity threshold processing in parallel on the same image data produced by a sensor device such as a scanning camera. The results of each process are utilized to validate the results of the other process and a resulting image is generated that contains only corresponding segmentation that is produced by both processes. 5 figs.

Martin, R.J.

1985-12-24T23:59:59.000Z

274

Hot cell shield plug extraction apparatus  

DOE Patents [OSTI]

An apparatus is provided for moving shielding plugs into and out of holes in concrete shielding walls in hot cells for handling radioactive materials without the use of external moving equipment. The apparatus provides a means whereby a shield plug is extracted from its hole and then swung approximately 90 degrees out of the way so that the hole may be accessed. The apparatus uses hinges to slide the plug in and out and to rotate it out of the way, the hinge apparatus also supporting the weight of the plug in all positions, with the load of the plug being transferred to a vertical wall by means of a bolting arrangement.

Knapp, Philip A. (Moore, ID); Manhart, Larry K. (Pingree, ID)

1995-01-01T23:59:59.000Z

275

Multiple volume compressor for hot gas engine  

DOE Patents [OSTI]

A multiple volume compressor for use in a hot gas (Stirling) engine having a plurality of different volume chambers arranged to pump down the engine when decreased power is called for and return the working gas to a storage tank or reservoir. A valve actuated bypass loop is placed over each chamber which can be opened to return gas discharged from the chamber back to the inlet thereto. By selectively actuating the bypass valves, a number of different compressor capacities can be attained without changing compressor speed whereby the capacity of the compressor can be matched to the power available from the engine which is used to drive the compressor.

Stotts, Robert E. (Clifton Park, NY)

1986-01-01T23:59:59.000Z

276

Particulate hot gas stream cleanup technical issues  

SciTech Connect (OSTI)

The analyses of hot gas stream cleanup particulate samples and descriptions of filter performance studied under this contract were designed to address problems with filter operation that have been linked to characteristics of the collected particulate matter. One objective of this work was to generate an interactive, computerized data bank of the key physical and chemical characteristics of ash and char collected from operating advanced particle filters and to relate these characteristics to the operation and performance of these filters. The interactive data bank summarizes analyses of over 160 ash and char samples from fifteen pressurized fluidized-bed combustion and gasification facilities utilizing high-temperature, high pressure barrier filters.

Pontius, D.H.; Snyder, T.R.

1999-09-30T23:59:59.000Z

277

Hot air drum evaporator. [Patent application  

DOE Patents [OSTI]

An evaporation system for aqueous radioactive waste uses standard 30 and 55 gallon drums. Waste solutions form cascading water sprays as they pass over a number of trays arranged in a vertical stack within a drum. Hot dry air is circulated radially of the drum through the water sprays thereby removing water vapor. The system is encased in concrete to prevent exposure to radioactivity. The use of standard 30 and 55 gallon drums permits an inexpensive compact modular design that is readily disposable, thus eliminating maintenance and radiation build-up problems encountered with conventional evaporation systems.

Black, R.L.

1980-11-12T23:59:59.000Z

278

Hot Fuel Examination Facility/South  

SciTech Connect (OSTI)

This document describes the potential environmental impacts associated with proposed modifications to the Hot Fuel Examination Facility/South (HFEF/S). The proposed action, to modify the existing HFEF/S at the Argonne National Laboratory-West (ANL-W) on the Idaho National Engineering Laboratory (INEL) in southeastern Idaho, would allow important aspects of the Integral Fast Reactor (IFR) concept, offering potential advantages in nuclear safety and economics, to be demonstrated. It would support fuel cycle experiments and would supply fresh fuel to the Experimental Breeder Reactor-II (EBR-II) at the INEL. 35 refs., 12 figs., 13 tabs.

Not Available

1990-05-01T23:59:59.000Z

279

Hot Plasma Partial to Bootstrap Current  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickr FlickrGuidedCH2MLLC HistoryVeterans | Updates andHospitalHot Plasma

280

Hot Lake Geothermal Area | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to: navigation,Ohio:GreerHi GtelHomer, Alaska:Horace, NorthHorvatic JumpOpenHot Lake Area)

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Hot Pot Geothermal Area | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to: navigation,Ohio:GreerHi GtelHomer, Alaska:Horace, NorthHorvatic JumpOpenHot

282

Control apparatus for hot gas engine  

DOE Patents [OSTI]

A mean pressure power control system for a hot gas (Stirling) engine utilizing a plurality of supply tanks for storing a working gas at different pressures. During pump down operations gas is bled from the engine by a compressor having a plurality of independent pumping volumes. In one embodiment of the invention, a bypass control valve system allows one or more of the compressor volumes to be connected to the storage tanks. By selectively sequencing the bypass valves, a capacity range can be developed over the compressor that allows for lower engine idle pressures and more rapid pump down rates.

Stotts, Robert E. (Clifton Park, NY)

1986-01-01T23:59:59.000Z

283

Hot Plasma Waves in Schwarzschild Magnetosphere  

E-Print Network [OSTI]

In this paper we examine the wave properties of hot plasma living in Schwarzschild magnetosphere. The 3+1 GRMHD perturbation equations are formulated for this scenario. These equations are Fourier analyzed and then solved numerically to obtain the dispersion relations for non-rotating, rotating non-magnetized and rotating magnetized plasma. The wave vector is evaluated which is used to calculate refractive index. These quantities are shown in graphs which are helpful to discuss the dispersive properties of the medium near the event horizon.

M. Sharif; Asma Rafique

2009-11-03T23:59:59.000Z

284

Solar Hot Water Heater Industry in Barbados  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from the GridwiseSite Management GuideReliability |WindowsSolarSolarSolar Hot Water

285

Just Hot Resources Consulting | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429 Throttled (botOpen6 Climate ZoneJeromeCounty isJupiter OxygenJust Hot

286

Title: Analyzing Occupancy Profiles from a Lighting Controls Field Study Authors: Francis Rubinstein, Nesrin Colak, Judith Jennings, and Danielle Neils  

E-Print Network [OSTI]

. The lighting energy usage in each zone was recorded automatically every 15 minutes. Using this data, we were of the occupancy sensor to reduce lighting energy usage. In selecting data for analysis, we chose to examine only-4], only one US study [5] examines the occupancy patterns of building occupants. Occupancy profiles allow

287

Optimization of Occupancy Based Demand Controlled Ventilation in Residences  

SciTech Connect (OSTI)

Although it has been used for many years in commercial buildings, the application of demand controlled ventilation in residences is limited. In this study we used occupant exposure to pollutants integrated over time (referred to as 'dose') as the metric to evaluate the effectiveness and air quality implications of demand controlled ventilation in residences. We looked at air quality for two situations. The first is that typically used in ventilation standards: the exposure over a long term. The second is to look at peak exposures that are associated with time variations in ventilation rates and pollutant generation. The pollutant generation had two components: a background rate associated with the building materials and furnishings and a second component related to occupants. The demand controlled ventilation system operated at a low airflow rate when the residence was unoccupied and at a high airflow rate when occupied. We used analytical solutions to the continuity equation to determine the ventilation effectiveness and the long-term chronic dose and peak acute exposure for a representative range of occupancy periods, pollutant generation rates and airflow rates. The results of the study showed that we can optimize the demand controlled airflow rates to reduce the quantity of air used for ventilation without introducing problematic acute conditions.

Mortensen, Dorthe K.; Walker, Iain S.; Sherman, Max H.

2011-05-01T23:59:59.000Z

288

DECOMMISSIONING OF HOT CELL FACILITIES AT THE BATTELLE COLUMBUS LABORATORIES  

SciTech Connect (OSTI)

Battelle Columbus Laboratories (BCL), located in Columbus, Ohio, must complete decontamination and decommissioning activities for nuclear research buildings and grounds at its West Jefferson Facilities by 2006, as mandated by Congress. This effort includes decommissioning several hot cells located in the Hot Cell Laboratory (Building JN-1). JN-1 was originally constructed in 1955, and a hot cell/high bay addition was built in the mid 1970s. For over 30 years, BCL used these hot cell facilities to conduct research for the nuclear power industry and several government agencies, including the U.S. Navy, U.S. Army, U.S. Air Force, and the U.S. Department of Energy. As a result of this research, the JN-1 hot cells became highly contaminated with mixed fission and activation products, as well as fuel residues. In 1998, the Battelle Columbus Laboratories Decommissioning Project (BCLDP) began efforts to decommission JN-1 with the goal of remediating the site to levels of residual contamination allowing future use without radiological restrictions. This goal requires that each hot cell be decommissioned to a state where it can be safely demolished and transported to an off-site disposal facility. To achieve this, the BCLDP uses a four-step process for decommissioning each hot cell: (1) Source Term Removal; (2) Initial (i.e., remote) Decontamination; (3) Utility Removal; and (4) Final (i.e., manual) Decontamination/Stabilization. To date, this process has been successfully utilized on 13 hot cells within JN-1, with one hot cell remaining to be decommissioned. This paper will provide a case study of the hot cell decommissioning being conducted by the BCLDP. Discussed will be the methods used to achieve the goals of each of the hot cell decommissioning stages and the lessons learned that could be applied at other sites where hot cells need to be decommissioned.

Weaver, Patrick; Henderson, Glenn; Erickson, Peter; Garber, David

2003-02-27T23:59:59.000Z

289

Design package for solar domestic hot water system  

SciTech Connect (OSTI)

Information used to evaluate the initial design of the Elcam, Inc., Solar Domestic Hot Water System is presented. Included are such items as the system performance specification, detailed design drawings and other information. Elcam, Inc., has developed two solar heated prototype hot water systems and two heat exchangers. The hot water systems consist of the following subsystems: collector, storage, control, transport, auxiliary energy, and government-furnished Site Data Acquisition. The two systems are installed at Tempe, Arizona, and San Diego, California.

None

1980-09-01T23:59:59.000Z

290

Occupational Radiation Protection Record-Keeping and Reporting Guide for use with Title 10, Code of Federal Regulations, Part 835, Occupational Radiation Protection  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Guide provides an acceptable methodology for establishing and operating an occupational radiation protection record-keeping and reporting program that will comply with U.S. Department of Energy (DOE) requirements specified in Title 10 of the Code of Federal Regulations (CFR), Part 835, Occupational Radiation Protection. Canceled by DOE G 441.1-1B.

1999-05-20T23:59:59.000Z

291

Deep drilling technology for hot crystalline rock  

SciTech Connect (OSTI)

The development of Hot Dry Rock (HDR) geothermal systems at the Fenton Hill, New Mexico site has required the drilling of four deep boreholes into hot, Precambrian granitic and metamorphic rocks. Thermal gradient holes, four observation wells 200 m (600 ft) deep, and an exploration core hole 800 m (2400 ft) deep guided the siting of the four deep boreholes. Results derived from the exploration core hole, GT-1 (Granite Test No. 1), were especially important in providing core from the granitic rock, and establishing the conductive thermal gradient and heat flow for the granitic basement rocks. Essential stratigraphic data and lost drilling-fluid zones were identified for the volcanic and sedimentary rocks above the contact with the crystalline basement. Using this information drilling strategies and well designs were then devised for the planning of the deeper wells. The four deep wells were drilled in pairs, the shallowest were planned and drilled to depths of 3 km in 1975 at a bottom-hole temperature of nearly 200/sup 0/C. These boreholes were followed by a pair of wells, completed in 1981, the deepest of which penetrated the Precambrian basement to a vertical depth of 4.39 km at a temperature of 320/sup 0/C.

Rowley, J.C.

1984-01-01T23:59:59.000Z

292

Hot water can freeze faster than cold?!?  

E-Print Network [OSTI]

We review the Mpemba effect, where intially hot water freezes faster than initially cold water. While the effect appears impossible at first sight, it has been seen in numerous experiments, was reported on by Aristotle, Francis Bacon, and Descartes, and has been well-known as folklore around the world. It has a rich and fascinating history, which culminates in the dramatic story of the secondary school student, Erasto Mpemba, who reintroduced the effect to the twentieth century scientific community. The phenomenon, while simple to describe, is deceptively complex, and illustrates numerous important issues about the scientific method: the role of skepticism in scientific inquiry, the influence of theory on experiment and observation, the need for precision in the statement of a scientific hypothesis, and the nature of falsifiability. We survey proposed theoretical mechanisms for the Mpemba effect, and the results of modern experiments on the phenomenon. Studies of the observation that hot water pipes are more likely to burst than cold water pipes are also described.

Monwhea Jeng

2005-12-29T23:59:59.000Z

293

The long hot summer of the tokamak  

E-Print Network [OSTI]

What have the probability for fine weather in summer and the possibility for a future use of nuclear fusion as a practically unlimited and clean energy source got in common? The answer is in the particular nature underlying both physical systems: both the atmosphere and hot magnetized fusion plasmas are determined by similar processes of structure formation in quasi-two-dimensional periodic nonlinear dynamical systems. Self-organization of waves and vortices on small scales in both cases leads to large-scale flows, which are, depending on conditions, either stable for a long time - or can break apart intermittently and expel large vortex structures. In the case of earth's atmosphere, a potential stabilization of the polar jet stream over northern Europe by warming in early summer leads to a high probability for stable hot midsummer weather in central Europe. The efficient utilization of nuclear fusion in a power plant also depends if a stabilization of such zonal flows ("H mode") may be sustained by heating o...

Kendl, Alexander

2012-01-01T23:59:59.000Z

294

Geology and Geothermal Potential of the Roosevelt Hot Springs...  

Open Energy Info (EERE)

Utah Jump to: navigation, search OpenEI Reference LibraryAdd to library Thesis: Geology and Geothermal Potential of the Roosevelt Hot Springs Area, Beaver County,...

295

Analysis Of Hot Springs And Associated Deposits In Yellowstone...  

Open Energy Info (EERE)

analysis, and VNIR spectroscopy. Samples of hot spring deposits, geyser deposits, and soil were also collected. Analysis of ASTER data provided broad scale characteristics of the...

296

Soil Sampling At Waunita Hot Springs Geothermal Area (Ringrose...  

Open Energy Info (EERE)

Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Soil Sampling At Waunita Hot Springs Geothermal Area (Ringrose & Pearl, 1981) Exploration...

297

Fairmont Hot Springs Resort Space Heating Low Temperature Geothermal...  

Open Energy Info (EERE)

Oregon Institute of Technology's Geo-Heat Center1 Fairmont Hot Springs Resort is a Space Heating low temperature direct use geothermal facility in Fairmont, Montana. This...

298

Walley's Hot Springs Resort Space Heating Low Temperature Geothermal...  

Open Energy Info (EERE)

Space Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Walley's Hot Springs Resort Space Heating Low Temperature Geothermal Facility Facility Walley's...

299

Glenwood Hot Springs Lodge Space Heating Low Temperature Geothermal...  

Open Energy Info (EERE)

Lodge Space Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Glenwood Hot Springs Lodge Space Heating Low Temperature Geothermal Facility Facility...

300

Hot Springs National Park Space Heating Low Temperature Geothermal...  

Open Energy Info (EERE)

National Park Space Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Hot Springs National Park Space Heating Low Temperature Geothermal Facility...

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Waunita Hot Springs Ranch Space Heating Low Temperature Geothermal...  

Open Energy Info (EERE)

Springs Ranch Space Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Waunita Hot Springs Ranch Space Heating Low Temperature Geothermal Facility...

302

Water Sampling At Mt Princeton Hot Springs Geothermal Area (Olson...  

Open Energy Info (EERE)

Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Mt Princeton Hot Springs Geothermal Area (Olson & Dellechaie, 1976)...

303

Time-Domain Electromagnetics At Neal Hot Springs Geothermal Area...  

Open Energy Info (EERE)

Activity: Time-Domain Electromagnetics At Neal Hot Springs Geothermal Area (Colorado School of Mines and Imperial College London, 2011) Exploration Activity Details Location Neal...

304

Energy Design Guidelines for High Performance Schools: Hot and...  

Energy Savers [EERE]

Climates Energy Design Guidelines for High Performance Schools: Hot and Humid Climates School districts around the country are finding that the smart energy choices can help them...

305

Isotopic Analysis- Fluid At Roosevelt Hot Springs Geothermal...  

Open Energy Info (EERE)

of the Roosevelt Hot Springs Geothermal Area. Notes Stable isotope analysis of thermal fluids determined meteoric origin primarily from the Mineral Mountains with a small...

306

Ground Gravity Survey At Neal Hot Springs Geothermal Area (U...  

Open Energy Info (EERE)

to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Ground Gravity Survey At Neal Hot Springs Geothermal Area (U.S. Geothermal Inc., 2007) Exploration...

307

Ground Gravity Survey At Mt Princeton Hot Springs Geothermal...  

Open Energy Info (EERE)

to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Ground Gravity Survey At Mt Princeton Hot Springs Geothermal Area (Case, Et Al., 1984) Exploration...

308

Ground Gravity Survey At Baltazor Hot Springs Area (Isherwood...  

Open Energy Info (EERE)

to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Ground Gravity Survey At Baltazor Hot Springs Area (Isherwood & Mabey, 1978) Exploration Activity...

309

Ground Gravity Survey At Roosevelt Hot Springs Geothermal Area...  

Open Energy Info (EERE)

Details Location Roosevelt Hot Springs Geothermal Area Exploration Technique Ground Gravity Survey Activity Date 1985 - 1985 Usefulness useful DOE-funding Unknown Exploration...

310

Vertical Electrical Sounding Configurations At Mt Princeton Hot...  

Open Energy Info (EERE)

navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Vertical Electrical Sounding Configurations At Mt Princeton Hot Springs Geothermal Area (Zohdy, Et Al.,...

311

analytical hot cells: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and Antenna 10-year Battery Kemner, Ken 4 Linear Power Spectra in Cold+Hot Dark Matter Models: Analytical Approximations and Applications Astrophysics (arXiv) Summary: This...

312

Chena Hot Springs GRED III Project: Final Report Geology, Petrology...  

Open Energy Info (EERE)

hot springs area. This included pluton mapping, limited mapping of localfaults and fracture orientations, and petrology, mineralogy, geochemistry, of surface rocksamples. 2)...

313

Idaho Public Utilities Commission Approves Neal Hot Springs Power...  

Open Energy Info (EERE)

Public Utilities Commission Approves Neal Hot Springs Power Purchase Agreement Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: Idaho Public Utilities...

314

Mandating Solar Hot Water by California Local Governments: Legal Issues  

E-Print Network [OSTI]

the legality of solar mandates in California cities andCITIES & CALIFORNIA ENERGY COMMISSION, SOLAR HANDBOOK FORMandating Solar Hot Water By California Local Governments:

Hoffman,, Peter C.

1981-01-01T23:59:59.000Z

315

Hydrogeologic investigation of Coso Hot Springs, Inyo County...  

Open Energy Info (EERE)

Hydrogeologic investigation of Coso Hot Springs, Inyo County, California. Final report October 1977--January 1978 Jump to: navigation, search OpenEI Reference LibraryAdd to library...

316

Geothermal: Sponsored by OSTI -- Economics of Developing Hot...  

Office of Scientific and Technical Information (OSTI)

Economics of Developing Hot Stratigraphic Reservoirs Geothermal Technologies Legacy Collection HelpFAQ | Site Map | Contact Us | Admin Log On HomeBasic Search About Publications...

317

Thermal Gradient Holes At Lake City Hot Springs Area (Warpinski...  

Open Energy Info (EERE)

Warpinski, Et Al., 2004) Exploration Activity Details Location Lake City Hot Springs Area Exploration Technique Thermal Gradient Holes Activity Date Usefulness not indicated...

318

Static Temperature Survey At Lake City Hot Springs Area (Benoit...  

Open Energy Info (EERE)

Benoit Et Al., 2005) Exploration Activity Details Location Lake City Hot Springs Area Exploration Technique Static Temperature Survey Activity Date Usefulness useful DOE-funding...

319

Geothermal Literature Review At Lake City Hot Springs Area (Benoit...  

Open Energy Info (EERE)

Et Al., 2004) Exploration Activity Details Location Lake City Hot Springs Area Exploration Technique Geothermal Literature Review Activity Date Usefulness not indicated DOE-funding...

320

Interpretation of Water Sample Analysis, Waunita Hot Spring Project...  

Open Energy Info (EERE)

R. H. Carpenter (Colorado Geological Survey in Cooperation with the U.S. Department of Energy). 1981. Interpretation of Water Sample Analysis, Waunita Hot Spring Project,...

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Abraham Hot Springs Geothermal Area Northern Basin and Range...  

Open Energy Info (EERE)

Range Geothermal Region Big Windy Hot Springs Geothermal Area Alaska Geothermal Region Bingham Caribou Geothermal Area Yellowstone Caldera Geothermal Region Birdsville...

322

Blue Mountain Hot Spring Guest Ranch Pool & Spa Low Temperature...  

Open Energy Info (EERE)

Ranch Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Blue Mountain Hot Spring Guest Ranch Pool & Spa Low Temperature Geothermal Facility Facility...

323

Micro-Earthquake At Roosevelt Hot Springs Geothermal Area (Zandt...  

Open Energy Info (EERE)

Activity Details Location Roosevelt Hot Springs Geothermal Area Exploration Technique Micro-Earthquake Activity Date 1982 Usefulness not indicated DOE-funding Unknown...

324

Thermal Gradient Holes At Waunita Hot Springs Geothermal Area...  

Open Energy Info (EERE)

holes Additional References Retrieved from "http:en.openei.orgwindex.php?titleThermalGradientHolesAtWaunitaHotSpringsGeothermalArea(Zacharakis,1981)&oldid762...

325

Thermal Gradient Holes At Breitenbush Hot Springs Area (Ingebritsen...  

Open Energy Info (EERE)

Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Thermal Gradient Holes At Breitenbush Hot Springs Area (Ingebritsen, Et Al., 1993)...

326

Quenching and Partitioning Process Development to Replace Hot...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Quenching and Partitioning Process ADVANCED MANUFACTURING OFFICE Quenching and Partitioning Process Development to Replace Hot Stamping of High-Strength Automotive Steel Novel...

327

Superconducting cuprate heterostructures for hot electron bolometers  

SciTech Connect (OSTI)

Transport properties of the resistive state of quasi-two dimensional superconducting heterostructures containing ultrathin La{sub 2?x}Sr{sub x}CuO{sub 4} layers synthesized using molecular beam epitaxy are studied. The electron transport exhibits strong deviation from Ohm's law, ?V??I{sup 3}, with a coefficient ?(T) that correlates with the temperature variation of the resistivity d?/dT. Close to the normal state, analysis of the nonlinear behavior in terms of electron heating yields an electron-phonon thermal conductance per unit area g{sub e?ph}?1 W/K cm{sup 2} at T = 20 K, one-two orders of magnitude smaller than in typical superconductors. This makes superconducting LaSrCuO heterostructures to be attractive candidate for the next generation of hot electron bolometers with greatly improved sensitivity.

Wen, B.; Yakobov, R.; Vitkalov, S. A. [Department of Physics, City College of New York, New York 10031 (United States)] [Department of Physics, City College of New York, New York 10031 (United States); Sergeev, A. [SUNY Research Foundation, SUNY at Buffalo, Buffalo, New York 14226 (United States)] [SUNY Research Foundation, SUNY at Buffalo, Buffalo, New York 14226 (United States)

2013-11-25T23:59:59.000Z

328

Thermodynamics of pairing transition in hot nuclei  

E-Print Network [OSTI]

The pairing correlations in hot nuclei $^{162}$Dy are investigated in terms of the thermodynamical properties by covariant density functional theory. The heat capacities $C_V$ are evaluated in the canonical ensemble theory and the paring correlations are treated by a shell-model-like approach, in which the particle number is conserved exactly. A S-shaped heat capacity curve, which agrees qualitatively with the experimental data, has been obtained and analyzed in details. It is found that the one-pair-broken states play crucial roles in the appearance of the S shape of the heat capacity curve. Moreover, due to the effect of the particle-number conservation, the pairing gap varies smoothly with the temperature, which indicates a gradual transition from the superfluid to the normal state.

Lang Liu; Zhen-Hua Zhang; Peng-Wei Zhao

2014-12-16T23:59:59.000Z

329

Sustainable Energy without the hot air  

E-Print Network [OSTI]

ii Back-cover blurb Sustainable energy without the hot air Category: Science. Were often told that huge amounts of renewable power are available wind, wave, tide, and so forth. But our current power consumption is also huge! To understand our sustainable energy crisis, we need to know how the one huge compares with the other. We need numbers, not adjectives. In this book, David MacKay, Professor in Physics at Cambridge University, shows how to estimate the numbers, and what those numbers depend on. As a case study, the presentation focuses on the United Kingdom, asking could the British live on sustainable energy resources alone? These numbers bring home the size of the changes that society must

David J. C. Mackay

2007-01-01T23:59:59.000Z

330

Telescopic nanotube device for hot nanolithography  

DOE Patents [OSTI]

A device for maintaining a constant tip-surface distance for producing nanolithography patterns on a surface using a telescopic nanotube for hot nanolithography. An outer nanotube is attached to an AFM cantilever opposite a support end. An inner nanotube is telescopically disposed within the outer nanotube. The tip of the inner nanotube is heated to a sufficiently high temperature and brought in the vicinity of the surface. Heat is transmitted to the surface for thermal imprinting. Because the inner tube moves telescopically along the outer nanotube axis, a tip-surface distance is maintained constant due to the vdW force interaction, which in turn eliminates the need of an active feedback loop.

Popescu, Adrian; Woods, Lilia M

2014-12-30T23:59:59.000Z

331

Hot gas path component cooling system  

DOE Patents [OSTI]

A cooling system for a hot gas path component is disclosed. The cooling system may include a component layer and a cover layer. The component layer may include a first inner surface and a second outer surface. The second outer surface may define a plurality of channels. The component layer may further define a plurality of passages extending generally between the first inner surface and the second outer surface. Each of the plurality of channels may be fluidly connected to at least one of the plurality of passages. The cover layer may be situated adjacent the second outer surface of the component layer. The plurality of passages may be configured to flow a cooling medium to the plurality of channels and provide impingement cooling to the cover layer. The plurality of channels may be configured to flow cooling medium therethrough, cooling the cover layer.

Lacy, Benjamin Paul; Bunker, Ronald Scott; Itzel, Gary Michael

2014-02-18T23:59:59.000Z

332

Magnetic island evolution in hot ion plasmas  

SciTech Connect (OSTI)

Effects of finite ion temperature on magnetic island evolution are studied by means of numerical simulations of a reduced set of two-fluid equations which include ion as well as electron diamagnetism in slab geometry. The polarization current is found to be almost an order of magnitude larger in hot than in cold ion plasmas, due to the strong shear of ion velocity around the separatrix of the magnetic islands. As a function of the island width, the propagation speed decreases from the electron drift velocity (for islands thinner than the Larmor radius) to values close to the guiding-center velocity (for islands of order 10 times the Larmor radius). In the latter regime, the polarization current is destabilizing (i.e., it drives magnetic island growth). This is in contrast to cold ion plasmas, where the polarization current is generally found to have a healing effect on freely propagating magnetic island.

Ishizawa, A.; Nakajima, N. [National Institute for Fusion Science, Toki 509-5292 (Japan); Waelbroeck, F. L.; Fitzpatrick, R.; Horton, W. [Institute for Fusion Studies, University of Texas at Austin, Austin, Texas 78712 (United States)

2012-07-15T23:59:59.000Z

333

Process for making ceramic hot gas filter  

DOE Patents [OSTI]

A ceramic hot-gas candle filter having a porous support of filament-wound oxide ceramic yarn at least partially surrounded by a porous refractory oxide ceramic matrix, and a membrane layer on at least one surface thereof. The membrane layer may be on the outer surface, the inner surface, or both the outer and inner surface of the porous support. The membrane layer may be formed of an ordered arrangement of circularly wound, continuous filament oxide ceramic yarn, a ceramic filler material which is less permeable than the filament-wound support structure, or some combination of continuous filament and filler material. A particularly effective membrane layer features circularly wound filament with gaps intentionally placed between adjacent windings, and a filler material of ceramic particulates uniformly distributed throughout the gap region. The filter can withstand thermal cycling during backpulse cleaning and is resistant to chemical degradation at high temperatures.

Connolly, Elizabeth Sokolinski (Wilmington, DE); Forsythe, George Daniel (Landenberg, PA); Domanski, Daniel Matthew (New Castle, DE); Chambers, Jeffrey Allen (Hockessin, DE); Rajendran, Govindasamy Paramasivam (Boothwyn, PA)

2001-01-01T23:59:59.000Z

334

Alternatives for reducing hot-water bills  

SciTech Connect (OSTI)

A two stage approach to reducing residential water heating bills is described. In Stage I, simple conservation measures were included to reduce the daily hot water energy consumption and the energy losses from the water tank. Once these savings are achieved, Stage II considers more costly options for further reducing the water heating bill. Four alternatives are considered in Stage II: gas water heaters; solar water heaters (two types); heat pump water heaters; and heat recovery from a heat pump or air conditioner. To account for variations within the MASEC region, information on water heating in Rapid City, Minneapolis, Chicago, Detroit, and Kansas City is presented in detail. Information on geography, major population centers, fuel prices, climate, and state solar incentives is covered. (MCW)

Bennington, G.E.; Spewak, P.C.

1981-06-01T23:59:59.000Z

335

Ceramic oxide composite hot gas filters  

SciTech Connect (OSTI)

This paper describes the development and testing of continuous fiber ceramic composites (CFCC) based hot gas filters. The work was divided into three primary tasks. In the first task, a preliminary set of compositions was fabricated in the form of open end tubes and characterized. The results of the first task were then used to identify the most promising compositions for sub-scale fabrication and testing. In addition to laboratory measurements of permeability and strength, exposure testing in a coal combustion environment was performed to assess the thermo-chemical stability of the CFCC materials. The results of this testing were used to down-select the filter composition for full-scale filter fabrication and testing in the third phase of the program.

Wagner, R.A.; Weitzel, P. [Babcock and Wilcox, Lynchburg, VA (United States)

1996-12-31T23:59:59.000Z

336

Discovery of magnetic fields in hot subdwarfs  

E-Print Network [OSTI]

We present initial results of a project to measure mean longitudinal magnetic fields in a group of sdB/OB/O stars. The project was inspired by the discovery of three super-metal-rich sdOB stars, each having metals (e.g. Ti, V) enhanced by factors of 10^3 to 10^5. Similar behaviour is observed in chemically peculiar A stars, where strong magnetic fields are responsible for the enrichment. With this in mind, we obtained circularly polarised spectra of two of the super-metal-rich sdOBs, two "normal" sdBs and two sdOs using FORS1 on the ESO/VLT. By examining circular polarisation in the hydrogen Balmer lines and in helium lines, we have detected magnetic fields with strengths of 1-2 kG in most of our targets. This suggests that such fields are relatively common in hot subdwarfs.

S. J. O'Toole; S. Jordan; S. Friedrich; U. Heber

2004-10-02T23:59:59.000Z

337

Hot Cell Facility (HCF) Safety Analysis Report  

SciTech Connect (OSTI)

This Safety Analysis Report (SAR) is prepared in compliance with the requirements of DOE Order 5480.23, Nuclear Safety Analysis Reports, and has been written to the format and content guide of DOE-STD-3009-94 Preparation Guide for U. S. Department of Energy Nonreactor Nuclear Safety Analysis Reports. The Hot Cell Facility is a Hazard Category 2 nonreactor nuclear facility, and is operated by Sandia National Laboratories for the Department of Energy. This SAR provides a description of the HCF and its operations, an assessment of the hazards and potential accidents which may occur in the facility. The potential consequences and likelihood of these accidents are analyzed and described. Using the process and criteria described in DOE-STD-3009-94, safety-related structures, systems and components are identified, and the important safety functions of each SSC are described. Additionally, information which describes the safety management programs at SNL are described in ancillary chapters of the SAR.

MITCHELL,GERRY W.; LONGLEY,SUSAN W.; PHILBIN,JEFFREY S.; MAHN,JEFFREY A.; BERRY,DONALD T.; SCHWERS,NORMAN F.; VANDERBEEK,THOMAS E.; NAEGELI,ROBERT E.

2000-11-01T23:59:59.000Z

338

Redshift of photons penetrating a hot plasma  

E-Print Network [OSTI]

A new interaction, plasma redshift, is derived, which is important only when photons penetrate a hot, sparse electron plasma. The derivation of plasma redshift is based entirely on conventional axioms of physics. When photons penetrate a cold and dense plasma, they lose energy through ionization and excitation, Compton scattering on the individual electrons, and Raman scattering on the plasma frequency. But in sparse hot plasma, such as in the solar corona, the photons lose energy also in plasma redshift. The energy loss per electron in the plasma redshift is about equal to the product of the photon's energy and one half of the Compton cross-section per electron. In quiescent solar corona, this heating starts in the transition zone to the corona and is a major fraction of the coronal heating. Plasma redshift contributes also to the heating of the interstellar plasma, the galactic corona, and the intergalactic plasma. Plasma redshift explains the solar redshifts, the redshifts of the galactic corona, the cosmological redshifts, the cosmic microwave background, and the X-ray background. The plasma redshift explains the observed magnitude-redshift relation for supernovae SNe Ia without the big bang, dark matter, or dark energy. There is no cosmic time dilation. The universe is not expanding. The plasma redshift, when compared with experiments, shows that the photons' classical gravitational redshifts are reversed as the photons move from the Sun to the Earth. This is a quantum mechanical effect. As seen from the Earth, a repulsion force acts on the photons. This means that there is no need for Einstein's Lambda term. The universe is quasi-static, infinite, and everlasting.

Ari Brynjolfsson

2005-10-07T23:59:59.000Z

339

Graphene vertical hot-electron terahertz detectors  

SciTech Connect (OSTI)

We propose and analyze the concept of the vertical hot-electron terahertz (THz) graphene-layer detectors (GLDs) based on the double-GL and multiple-GL structures with the barrier layers made of materials with a moderate conduction band off-set (such as tungsten disulfide and related materials). The operation of these detectors is enabled by the thermionic emissions from the GLs enhanced by the electrons heated by incoming THz radiation. Hence, these detectors are the hot-electron bolometric detectors. The electron heating is primarily associated with the intraband absorption (the Drude absorption). In the frame of the developed model, we calculate the responsivity and detectivity as functions of the photon energy, GL doping, and the applied voltage for the GLDs with different number of GLs. The detectors based on the cascade multiple-GL structures can exhibit a substantial photoelectric gain resulting in the elevated responsivity and detectivity. The advantages of the THz detectors under consideration are associated with their high sensitivity to the normal incident radiation and efficient operation at room temperature at the low end of the THz frequency range. Such GLDs with a metal grating, supporting the excitation of plasma oscillations in the GL-structures by the incident THz radiation, can exhibit a strong resonant response at the frequencies of several THz (in the range, where the operation of the conventional detectors based on A{sub 3}B{sub 5} materials, in particular, THz quantum-well detectors, is hindered due to a strong optical phonon radiation absorption in such materials). We also evaluate the characteristics of GLDs in the mid- and far-infrared ranges where the electron heating is due to the interband absorption in GLs.

Ryzhii, V., E-mail: v-ryzhii@riec.tohoku.ac.jp [Research Institute for Electrical Communication, Tohoku University, Sendai 980-8577 (Japan); Center for Photonics and Infrared Engineering, Bauman Moscow State Technical University and Institute of Ultra High Frequency Semiconductor Electronics, Russian Academy of Sciences, Moscow 111005 (Russian Federation); Satou, A.; Otsuji, T. [Research Institute for Electrical Communication, Tohoku University, Sendai 980-8577 (Japan); Ryzhii, M. [Department of Computer Science and Engineering, University of Aizu, Aizu-Wakamatsu 965-8580 (Japan); Mitin, V. [Department of Electrical Engineering, University at Buffalo, Buffalo, New York 1460-1920 (United States); Shur, M. S. [Departments of Electrical, Electronics, and Systems Engineering and Physics, Applied Physics, and Astronomy, Rensselaer Polytechnic Institute, Troy, New York 12180 (United States)

2014-09-21T23:59:59.000Z

340

RESONANT FARADAY ROTATION IN A HOT LITHIUM VAPOR  

E-Print Network [OSTI]

RESONANT FARADAY ROTATION IN A HOT LITHIUM VAPOR By SCOTT RUSSELL WAITUKAITIS A Thesis Submitted: #12;Abstract I describe a study of Faraday rotation in a hot lithium vapor. I begin by dis- cussing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.3 The Lithium Oven and Solenoid . . . . . . . . . . . . . . . . . 7 3 Theoretical Framework

Cronin, Alex D.

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Analysis Model for Domestic Hot Water Distribution Systems: Preprint  

SciTech Connect (OSTI)

A thermal model was developed to estimate the energy losses from prototypical domestic hot water (DHW) distribution systems for homes. The developed model, using the TRNSYS simulation software, allows researchers and designers to better evaluate the performance of hot water distribution systems in homes. Modeling results were compared with past experimental study results and showed good agreement.

Maguire, J.; Krarti, M.; Fang, X.

2011-11-01T23:59:59.000Z

342

Use of low temperature blowers for recirculation of hot gases  

DOE Patents [OSTI]

An apparatus is described for maintaining motors at low operating temperatures during recirculation of hot gases in fuel cell operations and chemical processes such as fluidized bed coal gasification. The apparatus includes a means for separating the hot process gas from the motor using a secondary lower temperature gas, thereby minimizing the temperature increase of the motor and associated accessories.

Maru, H.C.; Forooque, M.

1982-08-19T23:59:59.000Z

343

High Beta Observations of the Hot Electron Interchange Instability  

E-Print Network [OSTI]

High Beta Observations of the Hot Electron Interchange Instability E.E. Ortiz, M.E. Mauel, D observed in high-beta plasma created in the Levitated Dipole Experiment (LDX). We have previously of anisotropic high beta equilibrium · Measuring Electrostatic Fluctuations · Hot Electron Interchange (HEI

344

CANADIAN METALLURGICAL QUARTERLY HOT WORKABILITY OF 2304 AND 2205 DUPLEX  

E-Print Network [OSTI]

339 CANADIAN METALLURGICAL QUARTERLY HOT WORKABILITY OF 2304 AND 2205 DUPLEX STAINLESS STEELS E, 2002; in revised form December, 2003) Abstract -- The duplex stainless steels 2304 and 2205 were that the hot workability of 2304 and 2205 duplex stainless steels can be improved modestly by multistage

Niewczas, Marek

345

Self-contained hot-hollow cathode gun source assembly  

DOE Patents [OSTI]

A self-contained hot-hollow cathode gun source assembly for use in a vacuum chamber includes a crucible block having a hot-hollow cathode gun mounted underneath and providing a hole for the magnetic deflection of the ion/electron beam into a crucible on top the block.

Zeren, Joseph D. (Boulder, CO)

1986-01-01T23:59:59.000Z

346

Hot neutron star in generalized thermo-statistics  

E-Print Network [OSTI]

Hot neutron star in generalized thermo-statistics K. Miyazaki E-mail: miyazakiro@rio.odn.ne.jp Abstract The hot neutron star (NS) is investigated for the ...rst time in the generalized thermo-statistics. The study of neutron star (NS) is an important subject in nuclear physics and astro- physics. The equation

347

Hot Spot Conditions during Cavitation in Water Yuri T. Didenko,  

E-Print Network [OSTI]

Hot Spot Conditions during Cavitation in Water Yuri T. Didenko, William B. McNamara III-13 the effective hot spot temperature during aqueous cavitation remains unresolved. Given the importance of aqueous cavitation (sonography and bioeffects of ultrasound, sonochemical remediation of aqueous pollutants

Suslick, Kenneth S.

348

Self-contained hot-hollow cathode gun source assembly  

DOE Patents [OSTI]

A self-contained hot-hollow cathode gun source assembly for use in a vacuum chamber includes a crucible block having a hot-hollow cathode gun mounted underneath and providing a hole for the magnetic deflection of the ion/electron beam into a crucible on top the block.

Zeren, J.D.

1984-08-01T23:59:59.000Z

349

Occupational dose estimates for a monitored retrievable storage facility  

SciTech Connect (OSTI)

Occupational doses were estimated for radiation workers at the monitored retrievable storage (MRS) facility. This study provides an estimate of the occupational dose based on the current MRS facility design, examines the extent that various design parameters and assumptions affect the dose estimates, and identifies the areas and activities where exposures can be reduced most effectively. Occupational doses were estimated for both the primary storage concept and the alternate storage concept. The dose estimates indicate the annual dose to all radiation workers will be below the 5 rem/yr federal dose equivalent limit. However, the estimated dose to most of the receiving and storage crew (the workers responsible for the receipt, storage, and surveillance of the spent fuel and its subsequent retrieval), to the crane maintenance technicians, and to the cold and remote maintenance technicians is above the design objective of 1 rem/yr. The highest annual dose is received by the riggers (4.7 rem) in the receiving and storage crew. An indication of the extent to which various design parameters and assumptions affect the dose estimates was obtained by changing various design-based assumptions such as work procedures, background dose rates in radiation zones, and the amount of fuel received and stored annually. The study indicated that a combination of remote operations, increased shielding, and additional personnel (for specific jobs) or changes in operating procedures will be necessary to reduce worker doses below 1.0 rem/yr. Operations that could be made at least partially remote include the removal and replacement of the tiedowns, impact limiters, and personnel barriers from the shipping casks and the removal or installation of the inner closure bolts. Reductions of the background dose rates in the receiving/shipping and the transfer/discharge areas may be accomplished with additional shielding.

Harty, R.; Stoetzel, G.A.

1986-06-01T23:59:59.000Z

350

Office of Occupational Medicine. FY 1993, Annual report  

SciTech Connect (OSTI)

To date, we have assessed every DOE site at least once, many twice. With the information collected during these visits, EH-43 is developing a solid understanding of the occupational medical program activities at each site and will be better able to monitor progress. The assessment staff provided more specific technical assistance than in the past, especially in the area of compliance. In addition, the cardiovascular medical guidelines are near completion and the personnel assurance, firefighters, and protective force personnel medical guidelines are ready for the concurrence process.

Not Available

1993-08-01T23:59:59.000Z

351

29 CFR 1910 Occupational Safety and Health Standards  

National Nuclear Security Administration (NNSA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNationalRestart of the Review of theOFFICE OF8/%2AAdministration 97 Occupational

352

Occupational Radiation Protection Program (10 CFR 835) | Department of  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAXBalanced ScorecardReactor TechnologyOFFICE: I Oak Ridge,8 8Energy Occupational

353

Reporting Occupational Radiation Exposure Data | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015Department of EnergyReporting Occupational Radiation

354

Occupancy-Based Energy Management in Buildings: Final Report to Sponsors  

E-Print Network [OSTI]

2009. Payne FW. Energy management control system handbook.5] F. W. Payne. Energy management control system hand- book.Occupancy- Based Energy Management Systems for Buildings:

Sohn, Michael D.

2010-01-01T23:59:59.000Z

355

Visualizing Energy Information in Commercial Buildings: A Study of Tools, Expert Users, and Building Occupants  

E-Print Network [OSTI]

of LEED-Certified Commercial Buildings. Proceedings,on Energy Efficiency in Buildings, ACEEE, Washington DC,System User Interface for Building Occupants. ASHRAE

Lehrer, David; Vasudev, Janani

2011-01-01T23:59:59.000Z

356

Collecting Occupant Presence Data for Use in Energy Management of Commercial Buildings  

E-Print Network [OSTI]

ed. The Fairmont Press, Inc. EPRI. 1994. Occupancy sensors:Institute, Palo Alto, CA. EPRI BR-100323. Ekahau. Real TimePower Research Institute (EPRI) identified approximately 30%

Rosenblum, Benjamin Tarr

2012-01-01T23:59:59.000Z

357

E-Print Network 3.0 - active site occupancy Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to concerns of accidental... -specific luminaire that integrates a low-wattage light-emitting diode (LED) nightlight and an occupancy sensor... that saves energy while improving...

358

E-Print Network 3.0 - air-conditioning systemsfor occupant Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

University Collection: Biology and Medicine 3 Introduction Prior research has shown that energy savings are Summary: conditions for human occupancy. American Society of Heating,...

359

Low-cost coarse airborne particulate matter sensing for indoor occupancy detection  

E-Print Network [OSTI]

the energy-efficient smart building, occupancy detection andare being added to smart buildings to ensure the quality ofvaluable information for smart buildings. An important next

Weekly, Kevin

2013-01-01T23:59:59.000Z

360

E-Print Network 3.0 - air pollutants occupational Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

info@pacinst.org www.pacinst.org Summary: will be the greatest beneficiary of air pollution improvements in terms of occupational safety and health. The Pacific......

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

E-Print Network 3.0 - achieving effective occupational Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ecology 14 VECIMS 2003 -International Symposium on Virtual Environments, Human-Computer Interfaces, and Measurement Systems Summary: with probabilistic encoding of occupancy...

362

E-Print Network 3.0 - analyzing occupational injuries Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Laboratory's occupational medicine office are analyzed to reduce and... injuries. Ergonomics--The Science of Fitting the Job to the Worker From the work bench to the garden......

363

E-Print Network 3.0 - age human occupations Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

occupations among a population. This dynamics is assessed with a database... of wedding certificates that can be seen as a network made of links between (fathers and sons)...

364

Summary Report: Post-Occupancy Evaluation Surveys in K-12 Learning Environments  

E-Print Network [OSTI]

were designated as green buildings (defined here as havingrecent discussions in the green building industry, regardingthe impacts that green buildings have on their occupants.

Baker, L.

2011-01-01T23:59:59.000Z

365

Shell effects in hot nuclei and their influence on nuclear composition in supernova matter  

SciTech Connect (OSTI)

We calculate nuclear composition in supernova (SN) matter explicitly taking into account the temperature dependence of nuclear shell effects. The abundance of nuclei in SN matter is important in the dynamics of core-collapse supernovae and, in recently constructed equations of state (EOS) for SN matter, the composition of nuclei are calculated assuming nuclear statistical equilibrium wherein the nuclear internal free energies govern the composition. However, in these EOS, thermal effects on the shell energy are not explicitly taken into account. To address this shortfall, we calculate herein the shell energies of hot nuclei and examine their influence on the composition of SN matter. Following a simplified macroscopic-microscopic approach, we first calculate single-particle (SP) energies by using a spherical Woods-Saxon potential. Then we extract shell energies at finite temperatures using Strutinsky method with the Fermi distribution as the average occupation probability of the SP levels. The results show that at relatively low temperatures, shell effects are still important and magic nuclei are abundant. However, at temperatures above approximately 2 MeV, shell effects are almost negligible, and the mass fractions with shell energies including the thermal effect are close to those obtained from a simple liquid drop model at finite temperatures.

Nishimura, Suguru [Department of Pure and Applied Physics, Waseda University, 3-4-1 Okubo Shinjuku-ku, Tokyo 169-8555 (Japan); Takano, Masatoshi [Department of Pure and Applied Physics, Waseda University, 3-4-1 Okubo Shinjuku-ku, Tokyo 169-8555, Japan and Research Institute for Science and Engineering, Waseda University, 3-4-1 Okubo Shinjuku-ku, Tokyo 169-8555 (Japan)

2014-05-02T23:59:59.000Z

366

Building for the Pacific Rim Countries. Energy-efficient building strategies for hot, humid climates  

SciTech Connect (OSTI)

This book has been published by the Solar Energy Industries Association (SEIA), the US trade association of the solar thermal, photovoltaic, and passive solar manufacturers, distributors, and component suppliers. Its purpose is to help architects, builders, and developers construct energy-efficient homes in hot humid climates like the Pacific Rim Countries, and to allow occupants of these homes to enjoy enhanced comfort without reliance on mechanical air-conditioning systems. Two important factors are addressed in this book. First, the past few years have seen a tremendous increase in practical applications of new research. The current popularity of ceiling paddle fans, attic radiant barriers and natural daylighting attest to the importance of keeping up with the latest concepts in energy-reduction and comfort-awareness. Professionals who have been in the field for the past few years may be unaware of the latest research findings--some of which dramatically alter prior thinking on such subjects as natural ventilation or mechanical air conditioning. The second factor is the importance of site-specific characteristics, which greatly affect building strategies and designs. A thorough understanding of the climate is a prerequisite to good building design. Such factors as temperature, humidity, wind speed and direction, and solar radiation must be understood and properly integrated into the design for the home to be truly energy-efficient.

Sheinkopf, K. [ed.

1991-09-01T23:59:59.000Z

367

Statistical Analysis and Modeling of Occupancy Patterns in Open-Plan Offices using Measured Lighting-Switch Data  

SciTech Connect (OSTI)

Occupancy profile is one of the driving factors behind discrepancies between the measured and simulated energy consumption of buildings. The frequencies of occupants leaving their offices and the corresponding durations of absences have significant impact on energy use and the operational controls of buildings. This study used statistical methods to analyze the occupancy status, based on measured lighting-switch data in five-minute intervals, for a total of 200 open-plan (cubicle) offices. Five typical occupancy patterns were identified based on the average daily 24-hour profiles of the presence of occupants in their cubicles. These statistical patterns were represented by a one-square curve, a one-valley curve, a two-valley curve, a variable curve, and a flat curve. The key parameters that define the occupancy model are the average occupancy profile together with probability distributions of absence duration, and the number of times an occupant is absent from the cubicle. The statistical results also reveal that the number of absence occurrences decreases as total daily presence hours decrease, and the duration of absence from the cubicle decreases as the frequency of absence increases. The developed occupancy model captures the stochastic nature of occupants moving in and out of cubicles, and can be used to generate a more realistic occupancy schedule. This is crucial for improving the evaluation of the energy saving potential of occupancy based technologies and controls using building simulations. Finally, to demonstrate the use of the occupancy model, weekday occupant schedules were generated and discussed.

Chang, Wen-Kuei; Hong, Tianzhen

2013-01-01T23:59:59.000Z

368

THERMODYNAMICS OF LOW-TEMPERATURE (700-850oC) HOT CORROSION  

E-Print Network [OSTI]

funded low power hot corrosion studies. NRL MemorandumLOW-TEMPERATURE {700-850C) HOT CORROSION A.K. Misra, D.P.TEMPERATURE (700-850" C) HOT CORROSION A.K. Misra and D.P.

Misra, A.K.

2013-01-01T23:59:59.000Z

369

Final Report Balancing energy conservation and occupant needs in ventilation rate standards for Big Box stores in California: predicted indoor air quality and energy consumption using a matrix of ventilation scenarios  

E-Print Network [OSTI]

MG. (2010). Balancing energy conservation and occupant needsReport BalancingenergyconservationandoccupantneedsReport Balancing energy conservation and occupant needs in

Apte, Michael G.

2013-01-01T23:59:59.000Z

370

Floating loop method for cooling integrated motors and inverters using hot liquid refrigerant  

DOE Patents [OSTI]

A method for cooling vehicle components using the vehicle air conditioning system comprising the steps of: tapping the hot liquid refrigerant of said air conditioning system, flooding a heat exchanger in the vehicle component with said hot liquid refrigerant, evaporating said hot liquid refrigerant into hot vapor refrigerant using the heat from said vehicle component, and returning said hot vapor refrigerant to the hot vapor refrigerant line in said vehicle air conditioning system.

Hsu, John S.; Ayers, Curtis W.; Coomer, Chester; Marlino, Laura D.

2007-03-20T23:59:59.000Z

371

E-Print Network 3.0 - alara-conscious hot particle Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

all particles must leave at low energy. Fig. 1. Diffusion path from hot core to cold... , the diffusion path must connect hot ... Source: Fisch, Nathaniel J.- Princeton...

372

HOT GAS HALOS IN EARLY-TYPE FIELD GALAXIES  

SciTech Connect (OSTI)

We use Chandra and XMM-Newton to study the hot gas content in a sample of field early-type galaxies. We find that the L {sub X}-L {sub K} relationship is steeper for field galaxies than for comparable galaxies in groups and clusters. The low hot gas content of field galaxies with L {sub K} {approx_lt} L {sub *} suggests that internal processes such as supernovae-driven winds or active galactic nucleus feedback expel hot gas from low-mass galaxies. Such mechanisms may be less effective in groups and clusters where the presence of an intragroup or intracluster medium can confine outflowing material. In addition, galaxies in groups and clusters may be able to accrete gas from the ambient medium. While there is a population of L {sub K} {approx_lt} L {sub *} galaxies in groups and clusters that retain hot gas halos, some galaxies in these rich environments, including brighter galaxies, are largely devoid of hot gas. In these cases, the hot gas halos have likely been removed via ram pressure stripping. This suggests a very complex interplay between the intragroup/intracluster medium and hot gas halos of galaxies in rich environments, with the ambient medium helping to confine or even enhance the halos in some cases and acting to remove gas in others. In contrast, the hot gas content of more isolated galaxies is largely a function of the mass of the galaxy, with more massive galaxies able to maintain their halos, while in lower mass systems the hot gas escapes in outflowing winds.

Mulchaey, John S. [Observatories of the Carnegie Institution of Science, 813 Santa Barbara Street, Pasadena, CA 91101 (United States); Jeltema, Tesla E., E-mail: mulchaey@obs.carnegiescience.ed, E-mail: tesla@ucolick.or [UCO/Lick Observatories, 1156 High Street, Santa Cruz, CA 95064 (United States)

2010-05-20T23:59:59.000Z

373

Survival of charmonia in a hot environment  

E-Print Network [OSTI]

A colorless c-cbar dipole emerging from a heavy ion collision and developing the charmonium wave function can be broken-up by final state interactions (FSI) propagating through the hot medium created in the collision. We single out two mechanisms of charmonium attenuation: (i) Debye color screening, called melting; and (ii) color-exchange interaction with the medium, called absorption. The former problem has been treated so far only for charmonia at rest embedded in the medium, while in practice their transverse momenta at the LHC are quite high, =7-10 GeV^2. We demonstrate that a c-cbar dipole may have a large survival probability even at infinitely high temperature. We develop a procedure of Lorentz boosting of the Schroedinger equation to a moving reference frame and perform the first realistic calculations of the charmonium survival probability employing the path-integral technique, incorporating both melting and absorption. These effects are found to have comparable magnitudes. We also calculated the FSI suppression factor for the radial excitation psi(2S) and found it to be stronger than for J/psi, except large p_T, where psi(2S) is relatively enhanced. The azimuthal asymmetry parameter v_2 is also calculated.

B. Z. Kopeliovich; I. K. Potashnikova; Ivan Schmidt; M. Siddikov

2014-12-14T23:59:59.000Z

374

Slow Burgers Vortices in Hot Conformal Fluids  

E-Print Network [OSTI]

The quintessential vortex solution in (3+1)-dimensional nonrelativistic, incompressible fluid mechanics is the Burgers vortex. We show that, in a finite domain, conformal fluids also admit hot vortex solutions with everywhere nonrelativistic speeds. These are identical to Burgers' solution, except that their radius is reduced by a factor of 2/sqrt(3). A rough calculation indicates that at RHIC these vortices are indeed smaller than the fireball itself during thermalization. Similarly to the Burgers vortex, these solutions manifest vortex stretching which avoids short distance singularities and so suggests that conformal fluid flows share the same nonsingularity as solutions of the Navier-Stokes equations. Naively generalizing this calculation to an arbitrary equation of state w, we observe that the Burgers vortex radius diverges as w crosses -1. While it has been argued that such a crossover leads to an instability in certain perfect fluids, the absence of Burgers vortices and therefore vortex stretching suggests that, in addition to the well-studied big rip singularities, viscous phantom fluids generically develop vorticity singularities.

Jarah Evslin

2011-03-29T23:59:59.000Z

375

Westinghouse hot gas particle filter system  

SciTech Connect (OSTI)

Integrated Gasification Combined Cycles (IGCC) and Pressurized Circulating Fluidized Bed Cycles (PCFB) are being developed and demonstrated for commercial power generation applications. Hot gas particulate filters (HGPF) are key components for the successful implementation of IGCC and PCFB in power generation gas turbine cycles. The objective is to develop and qualify through analysis and testing a practical HGPF system that meets the performance and operational requirements of PCFB and IGCC systems. This paper reports on the status of Westinghouse`s HGPF commercialization programs including: A quick summary of past gasification based HGPF test programs; A summary of the integrated HGPF operation at the American Electric Power, Tidd Pressurized Fluidized Bed Combustion (PFBC) Demonstration Project with approximately 6000 hours of HGPF testing completed; A summary of approximately 3200 hours of HGPF testing at the Foster Wheeler (FW) 10 MW{sub e} facility located in Karhula, Finland; A summary of over 700 hours of HGPF operation at the FW 2 MW{sub e} topping PCFB facility located in Livingston, New Jersey; A summary of the design of the HGPFs for the DOE/Southern Company Services, Power System Development Facility (PSDF) located in Wilsonville, Alabama; A summary of the design of the commercial-scale HGPF system for the Sierra Pacific, Pinon Pine IGCC Project; A review of completed testing and a summary of planned testing of Westinghouse HGPFs in Biomass IGCC applications; and A brief summary of the HGPF systems for the City of Lakeland, McIntosh Unit 4 PCFB Demonstration Project.

Lippert, T.E.; Bruck, G.J.; Newby, R.A.; Bachovchin, D.M. [Westinghouse Electric Corp., Pittsburgh, PA (United States). Science and Technology Center; Debski, V.L.; Morehead, H.T. [Westinghouse Electric Corp., Orlando, FL (United States). Power Generation Business Unit

1997-12-31T23:59:59.000Z

376

Hot gas particle filter systems: Commercialization status  

SciTech Connect (OSTI)

Integrated Gasification Combined Cycles (IGCCs) and Pressurized Circulating Fluidized Bed Cycles (PCFBs) are being developed and demonstrated for commercial power generation applications. Hot gas particulate filters (HGPFs) are key components for the successful implementation of advanced IGCC and PCFB power generation cycles. The objective is to develop and qualify through analysis and testing a practical HGPF system that meets the performance and operational requirements of PCFB and IGCC systems. This paper reports on the status of Westinghouse`s HGPF commercialization programs including: A quick summary of past gasification based HGPF test programs; A summary of the integrated HGPF operation at the American Electric Power, Tidd Pressurized Fluidized Bed Combustion (PFBC) Demonstration Project with approximately 6,000 hours of HGPF testing completed; A summary of approximately 3,200 hours of HGPF testing at the Foster Wheeler (FW) 10 MWe PCFB facility located in Karhula, Finland; A summary of over 700 hours of HGPF operation at the FW 2 MWe topping PCFB facility located in Livingston, New Jersey; A summary of the design of the HGPFs for the DOE/Southern Company Services, Power System Development Facility (PSDF) located in Wilsonville, Alabama; A summary of the design of the commercial-scale HGPF system for the Sierra Pacific, Pinon Pine IGCC Project; A review of completed testing and a summary of planned testing of Westinghouse HGPFs in Biomass IGCC applications; and A brief summary of the HGPF systems for the City of Lakeland, McIntosh Unit 4 PCFB Demonstration Project.

Morehead, H.T.; Adams, V.L. [Westinghouse Electric Corp., Orlando, FL (United States). Power Generation Business Unit; Yang, W.C.; Lippert, T.E. [Westinghouse Electric Corp., Pittsburgh, PA (United States). Science and Technology Center

1997-12-31T23:59:59.000Z

377

METC hot gas desulfurization program overview  

SciTech Connect (OSTI)

This overview provides a frame of reference for the Morgantown Energy Technology Center`s (METC`S) on-going hot gas desulfurization research. Although there are several methods to separate contaminant gases from fuel gases, that method receiving primary development is absorption through the use of metal oxides. Research into high-temperature and high-pressure control of sulfur species includes primarily those sorbents made of mixed-metal oxides, which offer the advantages of regenerability. These are predominantly composed of zinc and are made into media that can be utilized in reactors of either fixed-bed, moving-bed, fluidized-bed, or transport configurations. Zinc Ferrite (ZnO-Fe{sub 2}O{sub 3}), Zinc Titanate (ZnO-TiO{sub 2}), Z-SORP{reg_sign}, and METC-2/METC-6 are the current mixed-metal sorbents being investigated. The METC desulfurization program is composed of three major components: bench-scale research, pilot-plant operation, and demonstration that is a portion of the Clean Coal Demonstration projects.

Cicero, D.C.

1994-10-01T23:59:59.000Z

378

Statistical Hot Channel Analysis for the NBSR  

SciTech Connect (OSTI)

A statistical analysis of thermal limits has been carried out for the research reactor (NBSR) at the National Institute of Standards and Technology (NIST). The objective of this analysis was to update the uncertainties of the hot channel factors with respect to previous analysis for both high-enriched uranium (HEU) and low-enriched uranium (LEU) fuels. Although uncertainties in key parameters which enter into the analysis are not yet known for the LEU core, the current analysis uses reasonable approximations instead of conservative estimates based on HEU values. Cumulative distribution functions (CDFs) were obtained for critical heat flux ratio (CHFR), and onset of flow instability ratio (OFIR). As was done previously, the Sudo-Kaminaga correlation was used for CHF and the Saha-Zuber correlation was used for OFI. Results were obtained for probability levels of 90%, 95%, and 99.9%. As an example of the analysis, the results for both the existing reactor with HEU fuel and the LEU core show that CHFR would have to be above 1.39 to assure with 95% probability that there is no CHF. For the OFIR, the results show that the ratio should be above 1.40 to assure with a 95% probability that OFI is not reached.

Cuadra A.; Baek J.

2014-05-27T23:59:59.000Z

379

Hot isostatic press waste option study report  

SciTech Connect (OSTI)

A Settlement Agreement between the Department of Energy and the State of Idaho mandates that all high-level radioactive waste now stored at the Idaho Chemical Processing Plant be treated so that it is ready to move out of Idaho for disposal by the target date of 2035. This study investigates the immobilization of all Idaho Chemical Processing Plant calcine, including calcined sodium bearing waste, via the process known as hot isostatic press, which produces compact solid waste forms by means of high temperature and pressure (1,050 C and 20,000 psi), as the treatment method for complying with the settlement agreement. The final waste product would be contained in stainless-steel canisters, the same type used at the Savannah River Site for vitrified waste, and stored at the Idaho National Engineering and Environmental Laboratory until a national geological repository becomes available for its disposal. The waste processing period is from 2013 through 2032, and disposal at the High Level Waste repository will probably begin sometime after 2065.

Russell, N.E.; Taylor, D.D.

1998-02-01T23:59:59.000Z

380

Photon Upconversion with Hot Carriers in Plasmonic Systems  

E-Print Network [OSTI]

We propose a novel scheme of photon upconversion based on harnessing the energy of plasmonic hot carriers. Low-energy photons excite hot electrons and hot holes in a plasmonic nanoparticle, which are then injected into an adjacent semiconductor quantum well where they radiatively recombine to emit a photon of higher energy. We theoretically study the proposed upconversion scheme using Fermi-liquid theory and determine the upconversion quantum efficiency to be as high as 25% in 5 nm silver nanocubes. This upconversion scheme is linear in its operation, does not require coherent illumination, offers spectral tunability, and is more efficient than conventional upconverters.

Naik, Gururaj V

2015-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Occupant comfort and engagement in green buildings: Examining the effects of knowledge, feedback and workplace culture  

E-Print Network [OSTI]

Occupant comfort and engagement in green buildings: Examining the effects of knowledge, feedback years to their design, performance and evaluation. The successful delivery of green buildings requires within economic means. Occupant comfort and behaviour can have a significant impact on green building

Pedersen, Tom

382

Abstract--Airborne pollution and explosive gases threaten human health and occupational safety, therefore generating high  

E-Print Network [OSTI]

Abstract--Airborne pollution and explosive gases threaten human health and occupational safety and a thumb-drive sized prototype system. I. INTRODUCTION xposure to air pollution consistently ranks among to occupational safety as energy demands rise. Airborne pollutants and explosive gases vary in both time and space

Mason, Andrew

383

APPLICATION FOR SCHOLARSHIPS Health Science Studies, Pre-Professional Studies, and Environmental & Occupational Health  

E-Print Network [OSTI]

for (check): Medical Studies Health Care Administration Dental Studies Occupational Therapy VeterinaryAPPLICATION FOR SCHOLARSHIPS Health Science Studies, Pre-Professional Studies, and Environmental & Occupational Health You are able to complete this application by simply typing your information into the spaces

Barrash, Warren

384

Indra Prasad Paneru Livelihood strategy and occupational vulnerability of street ice cream vendors in Kathmandu Valley  

E-Print Network [OSTI]

Indra Prasad Paneru Livelihood strategy and occupational vulnerability of street ice cream vendors in Kathmandu Valley Livelihood strategy and occupational vulnerability of street ice cream vendors in Kathmandu-cream vendors of Kathmandu valley, Case study of Jawalakhel, Ratnapark area and Balaju area' explores

Richner, Heinz

385

Bachelor of Science, Environmental and Occupational Health, 2014-2015 Name ID# Date  

E-Print Network [OSTI]

Bachelor of Science, Environmental and Occupational Health, 2014-2015 Name ID# Date General Degree and Humanities 3-4 DLS ENGL 202 Technical Communication 3 DLS ENVHLTH 102 Global Environmental Health 3 BIOL 192 320 Community Environmental Health Management ENVHLTH 415 Occupational Safety and Health ENVHLTH 416

Barrash, Warren

386

Bachelor of Science, Environmental and Occupational Health, 2013-2014 Name ID# Date  

E-Print Network [OSTI]

Bachelor of Science, Environmental and Occupational Health, 2013-2014 Name ID# Date General Degree and Humanities 3-4 DLS ENGL 202 Technical Communication 3 DLS ENVHLTH 102 Global Environmental Health 3 BIOL 192 320 Community Environmental Health Management ENVHLTH 415 Occupational Safety and Health ENVHLTH 416

Barrash, Warren

387

Bachelor of Science, Environmental and Occupational Health, 2012-2013 Name ID# Date  

E-Print Network [OSTI]

Bachelor of Science, Environmental and Occupational Health, 2012-2013 Name ID# Date General Degree and Humanities 3-4 DLS ENGL 202 Technical Communication 3 DLS ENVHLTH 102 Global Environmental Health 3 BIOL 192 Management ENVHLTH 320 Community Environmental Health Management ENVHLTH 415 Occupational Safety and Health

Barrash, Warren

388

Statistical Analysis and Modeling of Occupancy Patterns in Open-Plan  

E-Print Network [OSTI]

LBNL-6080E Statistical Analysis and Modeling of Occupancy Patterns in Open-Plan Offices using Orlando Lawrence Berkeley National Laboratory is an equal opportunity employer. #12;1 Statistical Analysis statistical methods to analyze the occupancy status, based on measured lighting-switch data in five

389

Predicting household occupancy for smart heating control: A comparative performance analysis of  

E-Print Network [OSTI]

, occupancy prediction, smart heating, energy management, smart home, energy efficiency Corresponding author.e. the household having too low a temperature when the residents come back home triggering the heatingPredicting household occupancy for smart heating control: A comparative performance analysis

390

OBSERVE: Occupancy-Based System for Efficient Reduction of HVAC Energy  

E-Print Network [OSTI]

OBSERVE: Occupancy-Based System for Efficient Reduction of HVAC Energy Varick L. Erickson, Miguel Á & control General Terms Algorithms, Machine Learning, Measurement Keywords Occupancy, HVAC, Ventilation for heating, ventilation, and air-conditioning (HVAC) systems[2]. Studies suggest that 15% to 25% of HVAC

Carreira-Perpiñán, Miguel Á.

391

Occupational radiation Exposure at Agreement State-Licensed Materials Facilities, 1997-2010  

SciTech Connect (OSTI)

The purpose of this report is to examine occupational radiation exposures received under Agreement State licensees. As such, this report reflects the occupational radiation exposure data contained in the Radiation Exposure Information and Reporting System (REIRS) database, for 1997 through 2010, from Agreement State-licensed materials facilities.

U.S. Nuclear Regulatory Commission, Office of Nuclear Regulatory Research

2012-07-07T23:59:59.000Z

392

Updated: 10/03/08! Option in Occupational Education Studies (OCED)  

E-Print Network [OSTI]

Updated: 10/03/08! ! ! ! TLL Option in Occupational Education Studies (OCED) The Occupational Education Studies (OCED) option in the TLL is intended for professionals in the general field of workforce education and development. Teachers and administrators in career and technical education; personnel

Veiga, Pedro Manuel Barbosa

393

The Two-Day CERC-BEE Forum on Building Integrated Design and Occupant Behavior  

E-Print Network [OSTI]

The Two-Day CERC-BEE Forum on Building Integrated Design and Occupant Behavior: Presentations and discussions at the two-day CERC-BEE Forum on Building Integrated Design and Occupant Behavior for High employer. #12;2013 CERC-BEE Forum on Human Behavior and Integrated Design for High Performance Buildings

394

Three essays in labor and health economics: individual decisions on occupation, labor supply, and demand for heatlh  

E-Print Network [OSTI]

In this dissertation, I examine individual decisions in occupational choice, labor supply, and health care utilization. Occupational choice decisions of female college graduates on whether to teach or not are analyzed to understand the role...

Shin, Ja Eun

2005-08-29T23:59:59.000Z

395

Transport of hydrogen in metals with occupancy dependent trap energies  

SciTech Connect (OSTI)

Common diffusion trapping models for modeling hydrogen transport in metals are limited to traps with single de-trapping energies and a saturation occupancy of one. While they are successful in predicting typical mono isotopic ion implantation and thermal degassing experiments, they fail at describing recent experiments on isotope exchange at low temperatures. This paper presents a new modified diffusion trapping model with fill level dependent de-trapping energies that can also explain these new isotope exchange experiments. Density function theory (DFT) calculations predict that even mono vacancies can store between 6 and 12?H atoms with de-trapping energies that depend on the fill level of the mono vacancy. The new fill level dependent diffusion trapping model allows to test these DFT results by bridging the gap in length and time scale between DFT calculations and experiment.

Schmid, K., E-mail: klaus.schmid@ipp.mpg.de; Toussaint, U. von; Schwarz-Selinger, T. [Max-Planck-Institut fr Plasmaphysik, Boltzmannstrae 2, D-85748 Garching b. Mnchen (Germany)

2014-10-07T23:59:59.000Z

396

Occupational Radiation Exposure Analysis of US ITER DCLL TBM  

SciTech Connect (OSTI)

This report documents an Occupational Radiation Exposure (ORE) analysis that was performed for the US International Thermonuclear Experimental Reactor (ITER) Dual Coolant Lead Lithium (DCLL) Test Blanket Module (TBM). This analysis was performed with the QADMOD dose code for anticipated maintenance activities for this TBM concept and its ancillary systems. The QADMOD code was used to model the PbLi cooling loop of this TBM concept by specifying gamma ray source terms that simulated radioactive material within the piping, valves, heat exchanger, permeator, pump, drain tank, and cold trap of this cooling system. Estimates of the maintenance tasks that will have to be performed and the time required to perform these tasks where developed based on either expert opinion or on industrial maintenance experience for similar technologies. This report details the modeling activity and the calculated doses for the maintenance activities envisioned for the US DCLL TBM.

Merrill, Brad J; Cadwallader, Lee C; Dagher, Mohamad

2007-08-01T23:59:59.000Z

397

Evaluation of Energy Efficiency Measures in Hot and Humid Climates  

E-Print Network [OSTI]

Hot and humid climates present some of the most complex challenges for sustainable building designs. High temperatures coupled with high humidity create extreme comfort problems and exacerbate the potential for condensation, mold and mildew...

Zhao, Y.; Erwine, B.; Leonard, P.; Pease, B.; Dole, A.; Lee, A.

398

Chemical and Isotopic Composition of Casa Diablo Hot Spring:...  

Open Energy Info (EERE)

Composition of Casa Diablo Hot Spring: Magmatic CO2 near Mammoth Lakes, CA Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Chemical and...

399

alamos hot cell: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Our results indicate that the radiative eff... Xie, Fu-Guo 2012-01-01 270 Thursday 21 October 1999 physics : Bubbling hot Chemistry Websites Summary: is the consequence of waves...

400

Process characterization of a PMMA hot embossing system  

E-Print Network [OSTI]

Microfluidics devices are important both for research use and medical application. To create these microfluidics devices, the hot embossing process is commonly used. In order to characterize this process to enable cycle ...

Luginbuhl, Katharine

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Three Case Studies: Moisture Control in a Hot, Humid Climate  

E-Print Network [OSTI]

as analysis of the problems, and recommendations for correction. Each of these projects would be classified an airconditioned building in a hot, humid climate, and subject to the problems and design issues concomitant with these types of projects. The first...

French, W. R.

2002-01-01T23:59:59.000Z

402

Drilling Complete on Australian Hot Dry Rock Project  

Broader source: Energy.gov [DOE]

The first commercial attempt to create a commercial geothermal power plant using hot dry rock technology reached a crucial milestone on January 22, when a production well successfully reached its target depth.

403

Reservoir Investigations on the Hot Dry Rock Geothermal System...  

Open Energy Info (EERE)

Investigations on the Hot Dry Rock Geothermal System, Fenton Hill, New Mexico- Tracer Test Results Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference...

404

CUTTING -WELDING -HOT WORKS REQUIRED NOTIFICATION TO CUFD  

E-Print Network [OSTI]

CUTTING - WELDING - HOT WORKS REQUIRED NOTIFICATION TO CUFD Instructions: Fill out this form in its Time for work: Description of Work: Brazing Roofing Sweating WeldingSolderingCutting Other

Stuart, Steven J.

405

Compound and Elemental Analysis At Zim's Hot Springs Geothermal...  

Open Energy Info (EERE)

Usefulness could be useful with more improvements DOE-funding Unknown Notes Geothermal fluids from hot springs and wells have been sampled from a number of locations, including: 1)...

406

Compound and Elemental Analysis At Belknap-Foley-Bigelow Hot...  

Open Energy Info (EERE)

Usefulness could be useful with more improvements DOE-funding Unknown Notes Geothermal fluids from hot springs and wells have been sampled from a number of locations, including: 1)...

407

Compound and Elemental Analysis At Breitenbush Hot Springs Area...  

Open Energy Info (EERE)

Usefulness could be useful with more improvements DOE-funding Unknown Notes Geothermal fluids from hot springs and wells have been sampled from a number of locations, including: 1)...

408

A tropical grammar : an architectural grammar for hot humid climates  

E-Print Network [OSTI]

This thesis considers the viability of an architectural grammar based on traditional Caribbean architecture as an aid to designing climatically responsive architecture in hot humid climates. It argues that since traditional ...

Beamish, Anne, 1954-

1993-01-01T23:59:59.000Z

409

Continuous Commissioning of a Central Chilled Water & Hot Water System  

E-Print Network [OSTI]

the campus loops and the building loops. Some optimization of the plant chiller 1 boiler operation is also necessary and beneficial. In general, through Continuous Commissioning, chilled water and hot water loop temperature differences will be improved...

Deng, S.; Turner, W. D.; Batten, T.; Liu, M.

2000-01-01T23:59:59.000Z

410

Exploration model for possible geothermal reservoir, Coso Hot...  

Open Energy Info (EERE)

Abstract The purpose of this study was to test the hypothesis that a steam-filled fracture geothermal reservoir exists at Coso Hot Springs KGRA, as proposed by Combs and...

411

DOE Zero Energy Ready Home Efficient Hot Water Distribution I...  

Broader source: Energy.gov (indexed) [DOE]

I -- What's At Stake Webinar (Text Version) DOE Zero Energy Ready Home Efficient Hot Water Distribution I -- What's At Stake Webinar (Text Version) Below is the text version of the...

412

DOE Zero Energy Ready Home Efficient Hot Water Distribution II...  

Broader source: Energy.gov (indexed) [DOE]

-- How to Get it Right Webinar (Text Version) DOE Zero Energy Ready Home Efficient Hot Water Distribution II -- How to Get it Right Webinar (Text Version) Below is the text...

413

DOE ZERH Webinar: Efficient Hot Water Distribution II: How to...  

Broader source: Energy.gov (indexed) [DOE]

II: How to Get it Right DOE ZERH Webinar: Efficient Hot Water Distribution II: How to Get it Right Watch the video or view the presentation slides below Zero Energy Ready Homes...

414

Paternal occupational exposure to electromagnetic fields and neuroblastoma in offspring  

SciTech Connect (OSTI)

Investigators in Texas have reported an association between paternal employment in jobs linked with exposure to electromagnetic fields and risk of neuroblastoma in offspring. In an attempt to replicate this finding, the authors conducted a case-control study in Ohio. A total of 101 incident cases of neuroblastoma were identified through the Columbus (Ohio) Children's Hospital Tumor Registry. All cases were born sometime during the period 1942-1967. From a statewide roster of birth certificates, four controls were selected for each case, with individual matching on the case's year of birth, race, and sex, and the mother's county of residence at the time of the (index) child's birth. Multiple definitions were employed to infer the potential for paternal occupational exposure to electromagnetic fields from the industry/occupation statements on the birth certificates. Case-control comparisons revealed adjusted odds ratios ranging in magnitude from 0.5 to 1.9. For two of the exposure definitions employed--both of which are similar to one used by the Texas investigators--the corresponding odds ratios were modestly elevated (odds ratios = 1.6 and 1.9). Notably, the magnitude of these odds ratios is not inconsistent with the Texas findings, where the exposure definition referred to yielded an odds ratio of 2.1. Because the point estimates in this study are imprecise, and because the biologic plausibility of the association is uncertain, the results reported here must be interpreted cautiously. However, the apparent consistency between two independent studies suggests that future evaluation of the association is warranted.

Wilkins, J.R. 3d.; Hundley, V.D. (Ohio State Univ., Columbus (USA))

1990-06-01T23:59:59.000Z

415

Considerations for Energy Efficient Showers in Hot-Humid Climates  

E-Print Network [OSTI]

CONSIDERATIONS FOR ENERGY EFFICIENT SHOWERS IN HOT-HUMID CLIMATES D. E. Claridge and W.D. Turner Energy Systems Laboratory Department of Mechanical Engineering Texas ALM University ABSTRACT Measurements have been conducted on four low... for typical operation in Texas. This has significant implications for everyone who purchases or uses showerheads; this is particularly true in hot climates where supply water temperatures are relatively high. TESTS CONDUCTED Showerheads Tested Two...

Claridge, D. E.; Turner, W. D.

1989-01-01T23:59:59.000Z

416

On the burn topology of hot-spot-initiated reactions  

SciTech Connect (OSTI)

We determine the reaction progress function for an ideal hot spot model problem. The considered problem has an exact analytic solution that can derived from a reduction of Nichols statistical hot spot model. We perform numerical calculations to verify the analytic solution and to illustrate the error realized in real, finite systems. We show how the baseline problem, which does not distinguish between the reactant and product densities, can be scaled to handle general cases for which the two densities differ.

Hill, Larry G [Los Alamos National Laboratory; Zimmermann, Bjorn [WOLFRAM RESEARCH INC.; Nichols, Albert L [LLNL

2009-01-01T23:59:59.000Z

417

Emission of Visible Light by Hot Dense Metals  

SciTech Connect (OSTI)

We consider the emission of visible light by hot metal surfaces having uniform and non-uniform temperature distributions and by small droplets of liquid metal. The calculations employ a nonlocal transport theory for light emission, using the Kubo formula to relate microscopic current fluctuations to the dielectric function of the material. We describe a related algorithm for calculating radiation emission in particle simulation of hot fusion plasmas.

More, R.M.; Goto, M.; Graziani, F.; Ni, P.A.; Yoneda, H.

2009-12-01T23:59:59.000Z

418

Hot compression process for making edge seals for fuel cells  

DOE Patents [OSTI]

A hot compression process for forming integral edge seals in anode and cade assemblies wherein the assemblies are made to a nominal size larger than a finished size, beads of AFLAS are applied to a band adjacent the peripheral margins on both sides of the assemblies, the assemblies are placed in a hot press and compressed for about five minutes with a force sufficient to permeate the peripheral margins with the AFLAS, cooled and cut to finished size.

Dunyak, Thomas J. (Blacksburg, VA); Granata, Jr., Samuel J. (South Greensburg, PA)

1994-01-01T23:59:59.000Z

419

ON THE HOT GAS CONTENT OF THE MILKY WAY HALO  

SciTech Connect (OSTI)

The Milky Way appears to be missing baryons, as the observed mass in stars and gas is well below the cosmic mean. One possibility is that a substantial fraction of the Galaxy's baryons are embedded within an extended, million-degree hot halo, an idea supported indirectly by observations of warm gas clouds in the halo and gas-free dwarf spheroidal satellites. X-ray observations have established that hot gas does exist in our Galaxy beyond the local hot bubble; however, it may be distributed in a hot disk configuration. Moreover, recent investigations into the X-ray constraints have suggested that any Galactic corona must be insignificant. Here we re-examine the observational data, particularly in the X-ray and radio bands, in order to determine whether it is possible for a substantial fraction of the Galaxy's baryons to exist in {approx}10{sup 6} K gas. In agreement with past studies, we find that a baryonically closed halo is clearly ruled out if one assumes that the hot corona is distributed with a cuspy Navarro-Frenk-White profile. However, if the hot corona of the galaxy is in an extended, low-density distribution with a large central core, as expected for an adiabatic gas in hydrostatic equilibrium, then it may contain up to 10{sup 11} M {sub Sun} of material, possibly accounting for all of the missing Galactic baryons. We briefly discuss some potential avenues for discriminating between a massive, extended hot halo and a local hot disk.

Fang, Taotao [Department of Astronomy and Institute of Theoretical Physics and Astrophysics, Xiamen University, Xiamen, Fujian 361005 (China)] [Department of Astronomy and Institute of Theoretical Physics and Astrophysics, Xiamen University, Xiamen, Fujian 361005 (China); Bullock, James; Boylan-Kolchin, Michael [Department of Physics and Astronomy, 4129 Frederick Reines Hall, University of California, Irvine, CA 92697 (United States)] [Department of Physics and Astronomy, 4129 Frederick Reines Hall, University of California, Irvine, CA 92697 (United States)

2013-01-01T23:59:59.000Z

420

Managing Occupational Health and Safety in Small, Culturally Diverse Workplaces: Issues and Solutions, Sophia Antipolis : France (2011)  

E-Print Network [OSTI]

Managing Occupational Health and Safety in Small, Culturally Diverse Workplaces: Issues;Managing Occupational Health and Safety in Small, Culturally Diverse Workplaces: Issues and Solutions-00660170,version1-20Sep2012 Author manuscript, published in "Managing Occupational Health and Safety

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

CHAPTER 5. QUANTUM-EFFECT AND HOT-ELECTRON DEVICES Dept. of Electrical Engineering  

E-Print Network [OSTI]

- 1 - CHAPTER 5. QUANTUM-EFFECT AND HOT-ELECTRON DEVICES S. Luryi Dept. of Electrical Engineering Devices 41 5.3.3 Real-Space Transfer Transistors (RSTT) 45 5.3.4 Resonant Hot-Electron And Bipolar Blockade 32 5.3 HOT-ELECTRON STRUCTURES 5.3.1 Hot Electrons In Semiconductors 37 5.3.2 Ballistic Injection

Luryi, Serge

422

Blue sky in SOI: new opportunities for quantum and hot-electron devices  

E-Print Network [OSTI]

Blue sky in SOI: new opportunities for quantum and hot-electron devices S. Luryi a , A. Zaslavsky b to quantum effect and hot-electron devices. A number of such devices, based on quantum tunneling, hot-electron) substrates with ultrathin Si and insulator layers opens new oppor- tunities for quantum effect and hot-electron

Luryi, Serge

423

SIMULATION OF POROSITY AND HOT TEARS IN A SQUEEZE CAST MAGNESIUM CONTROL ARM  

E-Print Network [OSTI]

SIMULATION OF POROSITY AND HOT TEARS IN A SQUEEZE CAST MAGNESIUM CONTROL ARM K.D. Carlson1 , C: Magnesium Alloys, Casting, Shrinkage Porosity, Hot Tears, Modeling Abstract Simulations are performed and hot tears in squeeze casting of magnesium alloys. Introduction Both shrinkage porosity and hot tears

Beckermann, Christoph

424

Network Sensitivity to Hot-Potato Disruptions Renata Teixeira Aman Shaikh Tim Griffin Geoffrey M. Voelker  

E-Print Network [OSTI]

Network Sensitivity to Hot-Potato Disruptions Renata Teixeira Aman Shaikh Tim Griffin Geoffrey M@cs.ucsd.edu ABSTRACT Hot-potato routing is a mechanism employed when there are multi- ple (equally good) interdomain we call hot-potato disruptions. Recent work has shown that hot-potato disruptions can have

Voelker, Geoffrey M.

425

The Chilled Water and Hot Water Building Differential Pressure Setpoint Calculation - Chilled Water and Hot Water Pump Speed Control  

E-Print Network [OSTI]

A&M University College Station, TX ABSTRACT More and more variable frequency devices (VFD) are being installed on the chilled water and hot water pumps on the TAMU campus. Those pump speeds are varied to maintain chilled water... and the rest 46 buildings are located on the west campus. More and more variable frequency devices (VFD) are installed on chilled water and hot water pumps. The variable speed pump has reduced the over-pressuring of water systems and reduced pump...

Turner, W. D.; Bruner, H., Jr.; Claridge, D.; Liu, C.; Deng, S.

2002-01-01T23:59:59.000Z

426

Evaluation of Humidity Control Options in Hot-Humid Climate Homes (Fact Sheet)  

SciTech Connect (OSTI)

This technical highlight describes NREL research to analyze the indoor relative humidity in three home types in the hot-humid climate zone, and examine the impacts of various dehumidification equipment and controls. As the Building America program researches construction of homes that achieve greater source energy savings over typical mid-1990s construction, proper modeling of whole-house latent loads and operation of humidity control equipment has become a high priority. Long-term high relative humidity can cause health and durability problems in homes, particularly in a hot-humid climate. In this study, researchers at the National Renewable Energy Laboratory (NREL) used the latest EnergyPlus tool equipped with the moisture capacitance model to analyze the indoor relative humidity in three home types: a Building America high-performance home; a mid-1990s reference home; and a 2006 International Energy Conservation Code (IECC)-compliant home in hot-humid climate zones. They examined the impacts of various dehumidification equipment and controls on the high-performance home where the dehumidification equipment energy use can become a much larger portion of whole-house energy consumption. The research included a number of simulated cases: thermostat reset, A/C with energy recovery ventilator, heat exchanger assisted A/C, A/C with condenser reheat, A/C with desiccant wheel dehumidifier, A/C with DX dehumidifier, A/C with energy recovery ventilator, and DX dehumidifier. Space relative humidity, thermal comfort, and whole-house source energy consumption were compared for indoor relative humidity set points of 50%, 55%, and 60%. The study revealed why similar trends of high humidity were observed in all three homes regardless of energy efficiency, and why humidity problems are not necessarily unique in the high-performance home. Thermal comfort analysis indicated that occupants are unlikely to notice indoor humidity problems. The study confirmed that supplemental dehumidification is needed to maintain space relative humidity (RH) below 60% in a hot-humid climate home. Researchers also concluded that while all the active dehumidification options included in the study successfully controlled space relative humidity excursions, the increase in whole-house energy consumption was much more sensitive to the humidity set point than the chosen technology option. In the high-performance home, supplemental dehumidification equipment results in a significant source energy consumption penalty at 50% RH set point (12.6%-22.4%) compared to the consumption at 60% RH set point (1.5%-2.7%). At 50% and 55% RH set points, A/C with desiccant wheel dehumidifier and A/C with ERV and high-efficiency DX dehumidifier stand out as the two cases resulting in the smallest increase of source energy consumption. At an RH set point of 60%, all explicit dehumidification technologies result in similar insignificant increases in source energy consumption and thus are equally competitive.

Not Available

2011-12-01T23:59:59.000Z

427

Nuclear Multifragmentation and Phase Transition for hot nuclei  

E-Print Network [OSTI]

event sorting 9 3.1 Impact parameter selectors 10 3.2 Topology selectors 13 3.3 Multivariate analysis. On the other hand statistical descriptions based on phase space occupation also account well for the static subject which continues to fascinate nuclear physicists as well as theoreticians who extend

Paris-Sud XI, Université de

428

A Method for Modeling Household Occupant Behavior to Simulate Residential Energy Consumption  

SciTech Connect (OSTI)

This paper presents a statistical method for modeling the behavior of household occupants to estimate residential energy consumption. Using data gathered by the U.S. Census Bureau in the American Time Use Survey (ATUS), actions carried out by survey respondents are categorized into ten distinct activities. These activities are defined to correspond to the major energy consuming loads commonly found within the residential sector. Next, time varying minute resolution Markov chain based statistical models of different occupant types are developed. Using these behavioral models, individual occupants are simulated to show how an occupant interacts with the major residential energy consuming loads throughout the day. From these simulations, the minimum number of occupants, and consequently the minimum number of multiple occupant households, needing to be simulated to produce a statistically accurate representation of aggregate residential behavior can be determined. Finally, future work will involve the use of these occupant models along side residential load models to produce a high-resolution energy consumption profile and estimate the potential for demand response from residential loads.

Johnson, Brandon J [ORNL] [ORNL; Starke, Michael R [ORNL] [ORNL; Abdelaziz, Omar [ORNL] [ORNL; Jackson, Roderick K [ORNL] [ORNL; Tolbert, Leon M [University of Tennessee, Knoxville (UTK)] [University of Tennessee, Knoxville (UTK)

2014-01-01T23:59:59.000Z

429

Stochastic Modeling of Overtime Occupancy and Its Application in Building Energy Simulation and Calibration  

SciTech Connect (OSTI)

Overtime is a common phenomenon around the world. Overtime drives both internal heat gains from occupants, lighting and plug-loads, and HVAC operation during overtime periods. Overtime leads to longer occupancy hours and extended operation of building services systems beyond normal working hours, thus overtime impacts total building energy use. Current literature lacks methods to model overtime occupancy because overtime is stochastic in nature and varies by individual occupants and by time. To address this gap in the literature, this study aims to develop a new stochastic model based on the statistical analysis of measured overtime occupancy data from an office building. A binomial distribution is used to represent the total number of occupants working overtime, while an exponential distribution is used to represent the duration of overtime periods. The overtime model is used to generate overtime occupancy schedules as an input to the energy model of a second office building. The measured and simulated cooling energy use during the overtime period is compared in order to validate the overtime model. A hybrid approach to energy model calibration is proposed and tested, which combines ASHRAE Guideline 14 for the calibration of the energy model during normal working hours, and a proposed KS test for the calibration of the energy model during overtime. The developed stochastic overtime model and the hybrid calibration approach can be used in building energy simulations to improve the accuracy of results, and better understand the characteristics of overtime in office buildings.

Sun, Kaiyu; Yan , Da; Hong , Tianzhen; Guo, Siyue

2014-02-28T23:59:59.000Z

430

Analysis of geothermal electric-power generation at Big Creek Hot Springs, Lemhi County, Idaho  

SciTech Connect (OSTI)

Big Creek Hot Springs was evaluated as a source of electrical power for the Blackbird Cobalt Mine, approximately 13 miles south of the hot spring. An evaluaton of the geothermal potential of Big Creek Hot Springs, a suggested exploration program and budget, an engineering feasibility study of power generation at Big Creek Hot Springs, an economic analysis of the modeled power generating system, and an appraisal of the institutional factors influencing development at Big Creek Hot Springs are included.

Struhsacker, D.W. (ed.)

1981-01-01T23:59:59.000Z

431

WAVE PROPAGATION in the HOT DUCT of VHTR  

SciTech Connect (OSTI)

In VHTR, helium from the reactor vessel is conveyed to a power conversion unit through a hot duct. In a hypothesized Depressurized Conduction Cooldown event where a rupture of the hot duct occurs, pressure waves will be initiated and reverberate in the hot duct. A numerical model is developed to quantify the transients and the helium mass flux through the rupture for such events. The flow path of the helium forms a closed loop but only the hot duct is modeled in this study. The lower plum of the reactor vessel and the steam generator are treated as specified pressure and/or temperature boundary to the hot duct. The model is based on the conservation principles of mass, momentum and energy, and on the equations of state for helium. The numerical solution is based on the method of characteristics with specified time intervals with a predictor and corrector algorithm. The rupture sub-model gives reasonable results. Transients induced by ruptures with break area equaling 20%, 10%, and 5% of the duct cross-sectional area are described.

Richard Schultz; Jim C. P. Liou

2013-07-01T23:59:59.000Z

432

Occupational employment in nuclear-related activities, 1981  

SciTech Connect (OSTI)

1981 employment in nuclear-related activities is described, and compared to previous years. Employment characteristics examined include detailed occupations of scientists, engineers, and technicians; worker involvement in research and development activities; employment by industrial segment (e.g., reactor operation and maintenance, weapons production, and commercial laboratory services); employment by establishment type (government-owned, contractor-operated (GOCO), private, and nonprofit); regional employment; and employment by establishment size. Total 1981 nuclear-related employment is estimated to be 249,500 - a growth of 22,600 workers over the 1977 total. GOCO workers make up 36.9% of this total. Among all the nuclear-related workers, scientists comprise 5.1%, engineers, 15.3%; and technicians, 17.5%; the remaining 62.1% is composed of managers, skilled craft and clerical workers, and other support services. Research and development involvement has declined from the 1977 survey results, with 60.4% of scientists and 27.0% of engineers currently involved in R and D. The largest single industrial segment activity is weapons development (16.9% of total employment), followed closely by reactor operation and maintenance employment (16.7%). There has been considerable change in the distribution of employment by industrial segment from 1977 to 1981; the reactor and reactor component design and manufacturing segment fell by over 9700 workers while reactor operation and maintenance employment grew by over 24,000 workers.

Baker, J.G.; Olsen, K.

1982-04-01T23:59:59.000Z

433

Probabilistic Particle Flow Algorithm for High Occupancy Environment  

E-Print Network [OSTI]

Algorithms based on the particle flow approach are becoming increasingly utilized in collider experiments due to their superior jet energy and missing energy resolution compared to the traditional calorimeter-based measurements. Such methods have been shown to work well in environments with low occupancy of particles per unit of calorimeter granularity. However, at higher instantaneous luminosity or in detectors with coarse calorimeter segmentation, the overlaps of calorimeter energy deposits from charged and neutral particles significantly complicate particle energy reconstruction, reducing the overall energy resolution of the method. We present a technique designed to resolve overlapping energy depositions of spatially close particles using a statistically consistent probabilistic procedure. The technique is nearly free of ad-hoc corrections, improves energy resolution, and provides new important handles that can improve the sensitivity of physics analyses: the uncertainty of the jet energy on an event-by-event basis and the estimate of the probability of a given particle hypothesis for a given detector response. When applied to the reconstruction of hadronic jets produced in the decays of tau leptons using the CDF-II detector at Fermilab, the method has demonstrated reliable and robust performance.

Andrey Elagin; Pavel Murat; Alexandre Pranko; Alexei Safonov

2012-12-29T23:59:59.000Z

434

Red Galaxy Growth and the Halo Occupation Distribution  

E-Print Network [OSTI]

We have traced the past 7 Gyr of red galaxy stellar mass growth within dark matter halos. We have determined the halo occupation distribution, which describes how galaxies reside within dark matter halos, using the observed luminosity function and clustering of 40,696 0.2red galaxies in Bootes. Half of 10^{11.9} Msun/h halos host a red central galaxy, and this fraction increases with increasing halo mass. We do not observe any evolution of the relationship between red galaxy stellar mass and host halo mass, although we expect both galaxy stellar masses and halo masses to evolve over cosmic time. We find that the stellar mass contained within the red population has doubled since z=1, with the stellar mass within red satellite galaxies tripling over this redshift range. In cluster mass halos most of the stellar mass resides within satellite galaxies and the intra-cluster light, with a minority of the stellar mass residing within central galaxies. The stellar masses of the most luminous red central galaxies are proportional to halo mass to the power of a third. We thus conclude that halo mergers do not always lead to rapid growth of central galaxies. While very massive halos often double in mass over the past 7 Gyr, the stellar masses of their central galaxies typically grow by only 30%.

Michael J. I. Brown; Zheng Zheng; Martin White; Arjun Dey; Buell T. Jannuzi; Andrew J. Benson; Kate Brand; Mark Brodwin; Darren J. Croton

2008-04-15T23:59:59.000Z

435

Environmental and occupational hazards of the anesthesia workplace  

SciTech Connect (OSTI)

Our present state of research and knowledge strongly suggests that the volatile agents, halothane, enflurane and isoflurane, present only a minimal threat to our environment. Nitrous oxide, however, has ozone-depleting potential as well as a greenhouse gas effect which may contribute much to the problem of global warming over the next few decades. Release of anesthetic gases into the atmosphere presents a small problem in contrast to other sources of ozone-depleting chemicals and greenhouse gases, but anesthesia providers have a responsibility to minimize unnecessary atmospheric pollution by reevaluating the use of N2O, using low flows of gases and exploring the use of activated charcoal absorption in the scavenging systems to remove volatile agents. Infectious waste, radiation, lasers, chemicals and waste gases pose possible occupational health hazards in the operating room. Each of us should play a critical role in monitoring harmful substances and should actively practice techniques which would lessen the hazards. We should be cognizant of the fact that sources not yet introduced into our environment may have adverse effects on our health and that vigilance and education are key factors in maintaining a safe work environment.24 references.

Kole, T.E.

1990-10-01T23:59:59.000Z

436

Occupational exposures to uranium: processes, hazards, and regulations  

SciTech Connect (OSTI)

The United States Uranium Registry (USUR) was formed in 1978 to investigate potential hazards from occupational exposure to uranium and to assess the need for special health-related studies of uranium workers. This report provides a summary of Registry work done to date. The history of the uranium industry is outlined first, and the current commercial uranium industry (mining, milling, conversion, enrichment, and fuel fabrication) is described. This description includes information on basic processes and areas of greatest potential radiological exposure. In addition, inactive commercial facilities and other uranium operations are discussed. Regulation of the commercial production industry for uranium fuel is reported, including the historic development of regulations and the current regulatory agencies and procedures for each phase of the industry. A review of radiological health practices in the industry - facility monitoring, exposure control, exposure evaluation, and record-keeping - is presented. A discussion of the nonradiological hazards of the industry is provided, and the final section describes the tissue program developed as part of the Registry.

Stoetzel, G.A.; Fisher, D.R.; McCormack, W.D.; Hoenes, G.R.; Marks, S.; Moore, R.H.; Quilici, D.G.; Breitenstein, B.D.

1981-04-01T23:59:59.000Z

437

Towards Building Occupants Positioning: Track and Trace for Optimal Process Control  

E-Print Network [OSTI]

-time occupancy detection systems comprising multiple sensors within a wireless network (WSN) using technologies such as radio frequency identification (RFID) and WIFI enabled devices have been proposed for use in large commercial office buildings. However due...

Zeiler, W.; Labeodan, T.; Bozem, G.; Maaijen, R.

2013-01-01T23:59:59.000Z

438

Ann Occup Hyg . Author manuscript Asbestos-related diseases in automobile mechanics  

E-Print Network [OSTI]

Ann Occup Hyg . Author manuscript Page /1 7 Asbestos-related diseases in automobile mechanics Abstract Purpose Automobile mechanics have been exposed to asbestos number of automobile mechanics, little is known about the non-malignant respiratory diseases observed

Paris-Sud XI, Université de

439

Cost-effectiveness of freeway median high occupancy vehicle (HOV) facility conversion to rail guideway transit  

E-Print Network [OSTI]

Many freeways in the United States contain median high occupancy vehicle (HOV) facilities. These facilities have been envisioned by some as reserved space for future rail guideway transit. This thesis examines the cost-effectiveness of converting a...

Best, Matthew Evans

1996-01-01T23:59:59.000Z

440

Neurovascular coupling to D2/D3 dopamine receptor occupancy using simultaneous PET/functional MRI  

E-Print Network [OSTI]

This study employed simultaneous neuroimaging with positron emission tomography (PET) and functional magnetic resonance imaging (fMRI) to demonstrate the relationship between changes in receptor occupancy measured by PET ...

Sander, Christin Yen-Ming

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

New age constraints on the Middle Stone Age occupations of Kharga Oasis, Western Desert, Egypt  

E-Print Network [OSTI]

New age constraints on the Middle Stone Age occupations of Kharga Oasis, Western Desert, Egypt rocks, or tufas, exposed along the flanks of the Libyan Plateau near Kharga Oasis, Western Desert, Egypt

Asmerom, Yemane

442

UNIVERSITY OF TORONTO ACCIDENT/INCIDENT/OCCUPATIONAL DISEASE REPORT FOR EMPLOYEES  

E-Print Network [OSTI]

UNIVERSITY OF TORONTO ACCIDENT/INCIDENT/OCCUPATIONAL DISEASE REPORT FOR EMPLOYEES RELEVANT SECTIONS: _______________________________________ NAME OF SUPERVISOR TO WHOM ACCIDENT WAS REPORTED: _________________________________ TELEPHONE: _____________________ IF THERE WAS A DELAY IN REPORTING THIS ACCIDENT, LIST REASON

Kronzucker, Herbert J.

443

Evaluation of the Performance of Houses With and Without Supplemental Dehumidification in a Hot-Humid Climate  

SciTech Connect (OSTI)

This report, Evaluation of the Performance of Houses with and without Supplemental Dehumidification in a Hot-Humid Climate, describes a research study that that was conducted by the Building Science Corporation (BSC) Building America Research Team. BSC seeks to research and report on the field monitoring of the performance of in-situ supplemental dehumidification systems in low energy, high performance, homes in a Hot-Humid climate. The purpose of this research project was to observe and compare the humidity control performance of new, single family, low energy, and high performance, homes. Specifically, the study sought to compare the interior conditions and mechanical systems operation between two distinct groups of houses, homes with a supplemental dehumidifier installed in addition to HVAC system, and homes without any supplemental dehumidification. The subjects of the study were ten single-family new construction homes in New Orleans, LA.Data logging equipment was installed at each home in 2012. Interior conditions and various end-use loads were monitored for one year. In terms of averages, the homes with dehumidifiers are limiting elevated levels of humidity in the living space. However, there was significant variation in humidity control between individual houses. An analysis of the equipment operation did not show a clear correlation between energy use and humidity levels. In general, no single explanatory variable appears to provide a consistent understanding of the humidity control in each house. Indoor humidity is likely due to all of the factors we have examined, and the specifics of how they are used by each occupant.

Kerrigan, P.; Norton, P.

2014-10-01T23:59:59.000Z

444

Realt-Time Building Occupancy Sensing for Supporting Demand Driven HVAC Operations  

E-Print Network [OSTI]

regarding energy use. These all constitute drivers for the adoption of more sustainable ways of securing our energy needs (Shuai et al., 2011). Approximately about 40% of the world?s energy is consumed by buildings (ASHRAE, 2007), of which roughly about... short-comings; Passive infrared (PIR) sensor is the most commonly used technology for occupancy sensing in non-domestic buildings especially for lighting control (Delaney et al., 2009), however it fails to detect stationary occupants, thus switching...

Ekwevugbe, T.; Brown, N.; Pakka, V.

2013-01-01T23:59:59.000Z

445

Impacts of criticality safety on hot fuel examination facility operations  

SciTech Connect (OSTI)

The Hot Fuel Examination Facility (HFEF) complex comprises four large hot cells. These cells are used to support the nation's nuclear energy program, especially the liquid-metal fast breeder reactor, by providing nondestructive and destructive testing of irradiated reactor fuels and furnishing the hot cell services required for operation of Experimental Breeder Reactor II (EBR-II). Because it is a research rather than a production facility, HFEF assignments are varied and change from time to time to meet the requirements of our experimenters. Such a variety of operations presents many challenges, especially for nuclear criticality safety. The following operations are reviewed to assure that accidental criticality is not possible, and that all rules and regulations are met: transportation, temporary storage, examinations, and disposition.

Garcia, A.S.; Courtney, J.C.; Bacca, J.P.

1985-11-01T23:59:59.000Z

446

Pressurized water nuclear reactor system with hot leg vortex mitigator  

DOE Patents [OSTI]

A pressurized water nuclear reactor system includes a vortex mitigator in the form of a cylindrical conduit between the hot leg conduit and a first section of residual heat removal conduit, which conduit leads to a pump and a second section of residual heat removal conduit leading back to the reactor pressure vessel. The cylindrical conduit is of such a size that where the hot leg has an inner diameter D.sub.1, the first section has an inner diameter D.sub.2, and the cylindrical conduit or step nozzle has a length L and an inner diameter of D.sub.3 ; D.sub.3 /D.sub.1 is at least 0.55, D.sub.2 is at least 1.9, and L/D.sub.3 is at least 1.44, whereby cavitation of the pump by a vortex formed in the hot leg is prevented.

Lau, Louis K. S. (Monroeville, PA)

1990-01-01T23:59:59.000Z

447

EVIDENCE FOR HOT FAST FLOW ABOVE A SOLAR FLARE ARCADE  

SciTech Connect (OSTI)

Solar flares are one of the main forces behind space weather events. However, the mechanism that drives such energetic phenomena is not fully understood. The standard eruptive flare model predicts that magnetic reconnection occurs high in the corona where hot fast flows are created. Some imaging or spectroscopic observations have indicated the presence of these hot fast flows, but there have been no spectroscopic scanning observations to date to measure the two-dimensional structure quantitatively. We analyzed a flare that occurred on the west solar limb on 2012 January 27 observed by the Hinode EUV Imaging Spectrometer (EIS) and found that the hot (?30MK) fast (>500 km s{sup 1}) component was located above the flare loop. This is consistent with magnetic reconnection taking place above the flare loop.

Imada, S. [Solar-Terrestrial Environment Laboratory (STEL), Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8601 (Japan)] [Solar-Terrestrial Environment Laboratory (STEL), Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8601 (Japan); Aoki, K.; Hara, H.; Watanabe, T. [National Astronomical Observatory of Japan, 2-21-1 Osawa, Mitaka-shi, Tokyo 181-8588 (Japan)] [National Astronomical Observatory of Japan, 2-21-1 Osawa, Mitaka-shi, Tokyo 181-8588 (Japan); Harra, L. K. [UCL-Mullard Space Science Laboratory, Holmbury St. Mary, Dorking, Surrey RH5 6NT (United Kingdom)] [UCL-Mullard Space Science Laboratory, Holmbury St. Mary, Dorking, Surrey RH5 6NT (United Kingdom); Shimizu, T. [Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency, 3-1-1 Yoshinodai, Sagamihara-shi, Kanagawa 229-8510 (Japan)] [Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency, 3-1-1 Yoshinodai, Sagamihara-shi, Kanagawa 229-8510 (Japan)

2013-10-10T23:59:59.000Z

448

Intensification of hot extremes in the United States  

SciTech Connect (OSTI)

Governments are currently considering policies that will limit greenhouse gas concentrations, including negotiation of an international treaty to replace the expiring Kyoto Protocol. Existing mitigation targets have arisen primarily from political negotiations, and the ability of such policies to avoid dangerous impacts is still uncertain. Using a large suite of climate model experiments, we find that substantial intensification of hot extremes could occur within the next 3 decades, below the 2 C global warming target currently being considered by policy makers. We also find that the intensification of hot extremes is associated with a shift towards more anticyclonic atmospheric circulation during the warm season, along with warm-season drying over much of the U.S. The possibility that intensification of hot extremes could result from relatively small increases in greenhouse gas concentrations suggests that constraining global warming to 2 C may not be sufficient to avoid dangerous climate change.

Diffenbaugh, Noah [Stanford University; Ashfaq, Moetasim [ORNL

2010-01-01T23:59:59.000Z

449

Modeling patterns of hot water use in households  

SciTech Connect (OSTI)

This report presents a detailed model of hot water use patterns in individual households. The model improves upon an existing model by including the effects of four conditions that were previously unaccounted for: the absence of a clothes washer; the absence of a dishwasher; a household consisting of seniors only; and a household that does not pay for its own hot water use. Although these four conditions can significantly affect residential hot water use, and have been noted in other studies, this is the first time that they have been incorporated into a detailed model. This model allows detailed evaluation of the impact of potential efficiency standards for water heaters and other market transformation policies.

Lutz, James D.; Liu, Xiaomin; McMahon, James E.; Dunham, Camilla; Shown, Leslie J.; McCure, Quandra T.

1996-01-01T23:59:59.000Z

450

Modeling patterns of hot water use in households  

SciTech Connect (OSTI)

This report presents a detailed model of hot water use patterns in individual household. The model improves upon an existing model by including the effects of four conditions that were previously unaccounted for: the absence of a clothes washer; the absence of a dishwasher; a household consisting of seniors only; and a household that does not pay for its own hot water use. Although these four conditions can significantly affect residential hot water use, and have been noted in other studies, this is the first time that they have been incorporated into a detailed model. This model allows detailed evaluation of the impact of potential efficiency standards for water heaters and other market transformation policies. 21 refs., 3 figs., 10 tabs.

Lutz, J.D.; Liu, Xiaomin; McMahon, J.E. [and others

1996-11-01T23:59:59.000Z

451

TYPICAL HOT WATER DRAW PATTERNS BASED ON FIELD DATA  

SciTech Connect (OSTI)

There is significant variation in hot water use and draw patterns among households. This report describes typical hot water use patterns in single-family residences in North America. We found that daily hot water use is highly variable both among residences and within the same residence. We compared the results of our analysis of the field data to the conditions and draw patterns established in the current U.S. Department of Energy (DOE) test procedure for residential water heaters. The results show a higher number of smaller draws at lower flow rates than used in the test procedure. The data from which the draw patterns were developed were obtained from 12 separate field studies. This report describes the ways in which we managed, cleaned, and analyzed the data and the results of our data analysis. After preparing the data, we used the complete data set to analyze inlet and outlet water temperatures. Then we divided the data into three clusters reflecting house configurations that demonstrated small, medium, or large median daily hot water use. We developed the three clusters partly to reflect efforts of the ASHRAE standard project committee (SPC) 118.2 to revise the test procedure for residential water heaters to incorporate a range of draw patterns. ASHRAE SPC 118.2 has identified the need to separately evaluate at least three, and perhaps as many as five, different water heater capacities. We analyzed the daily hot water use data within each cluster in terms of volume and number of hot water draws. The daily draw patterns in each cluster were characterized using distributions for volume of draws, duration of draws, time since previous draw, and flow rates.

Lutz, Jim; Melody, Moya

2012-11-08T23:59:59.000Z

452

Io hot spots - infrared photometry of satellite occultations  

SciTech Connect (OSTI)

Io's active hot spots, which are presently mapped on the basis of IR photometry of this moon's occultation by other Gallilean satellites, are obtained with greatest spatial resolution near the sub-earth point. A model is developed for the occultation lightcurves, and its fitting to the data defines the apparent path of the occulting satellite relative to Io; the mean error in apparent relative position of occulting satellites is of the order of 178 km. A heretofore unknown, 20-km diameter hot spot is noted on Io's leading hemisphere. 31 references.

Goguen, J.D.; Matson, D.L.; Sinton, W.M.; Howell, R.R.; Dyck, H.M.

1988-12-01T23:59:59.000Z

453

Performance Evaluation of a Hot-Humid Climate Community  

SciTech Connect (OSTI)

Project Home Again is a development in New Orleans, LA created to provide new homes to victims of Hurricane Katrina. Building Science Corporation acted as a consultant for the project, advocating design strategies for durability, flood resistance, occupant comfort, and low energy use while maintaining cost effectiveness. These techniques include the use of high density spray foam insulation, LoE3 glazing, and supplemental dehumidification to maintain comfortable humidity levels without unnecessary cooling.

Osser, R.; Kerrigan, P.

2012-02-01T23:59:59.000Z

454

Hot repair of ceramic burner on hot blast stoves at USS/Kobe`s {number_sign}3 blast furnace  

SciTech Connect (OSTI)

During the 1992 reline of the No. 3 blast furnace, three new stoves were constructed. The design of the stoves, equipped with internal ceramic burners, was for providing a hot blast temperature of 2,000 F at a wind rate of 140,000 SCFM. After 3 years the performance had deteriorated so the burners were cleaned. When a second cleaning did not improve the performance of No. 3 blast furnace, it was decided to repair the refractory while still hot. The paper describes the hot repair procedures, taking a stove off for repairs, maintenance heat up during repairs, two stove operation, stove commissioning, repair of a ceramic burner, and wet gas prevention.

Bernarding, T.F.; Chemorov, M.; Shimono, S.; Phillips, G.R.

1997-12-31T23:59:59.000Z

455

Floating Loop System For Cooling Integrated Motors And Inverters Using Hot Liquid Refrigerant  

DOE Patents [OSTI]

A floating loop vehicle component cooling and air-conditioning system having at least one compressor for compressing cool vapor refrigerant into hot vapor refrigerant; at least one condenser for condensing the hot vapor refrigerant into hot liquid refrigerant by exchanging heat with outdoor air; at least one floating loop component cooling device for evaporating the hot liquid refrigerant into hot vapor refrigerant; at least one expansion device for expanding the hot liquid refrigerant into cool liquid refrigerant; at least one air conditioning evaporator for evaporating the cool liquid refrigerant into cool vapor refrigerant by exchanging heat with indoor air; and piping for interconnecting components of the cooling and air conditioning system.

Hsu, John S [Oak Ridge, TN; Ayers, Curtis W [Kingston, TN; Coomer, Chester [Knoxville, TN; Marlino, Laura D [Oak Ridge, TN

2006-02-07T23:59:59.000Z

456

The EMDEX Project: Technology transfer and occupational measurements  

SciTech Connect (OSTI)

The Electric and Magnetic Field Measurement Project for Utilities -- the EPRI EMDEX Project -- is a multifaceted project entailing technology transfer, measurement protocol design, data management, and exposure assessment analyses. The specific objectives of the project in order of priority were: to transfer the EMDEX technology to utilities; to develop measurement protocols and data management capabilities for large exposure data sets; and to collect, analyze, and document 60-Hz electric and magnetic field exposures for a diverse population. Transfer of the EPRI Electric and Magnetic Field Digital Exposure system (EMDEX) technology to the participating utilities was accomplished through training and through extensive involvement in the exposure data collection effort. Field exposure data measured by an EMDEX system were collected by volunteer utility employees at 59 sites in the US and three other countries between October 1988 and September 1989. Approximately 50,000 hours of magnetic field and 23,000 hours of electric field exposure records taken at 10-second intervals were obtained, of which 70% were from Work environments. Exposures and time spent in environments have been analyzed by Primary Work Environment, by occupied environment, and by job classification. Generally, the measured fields and exposures in the Generation, Transmission, Distribution and Substation environments were higher than in other occupational environments in utilities. The Nonwork fields and exposures for workers associated with various categories were comparable. Evaluation of the project by participants indicated general satisfaction with the EMDEX system and with this approach to technology transfer. This document, Volume 3 contains appendices with a complete set of project protocols, project materials, and extensive data tables.

Not Available

1990-11-01T23:59:59.000Z

457

Building America Best Practices Series, Volume 9: Builders Challenge Guide to 40% Whole-House Energy Savings in the Hot-Dry and Mixed-Dry Climates  

SciTech Connect (OSTI)

This best practices guide is the ninth in a series of guides for builders produced by the U.S. Department of Energys Building America Program. This guide book is a resource to help builders design and construct homes that are among the most energy-efficient available, while addressing issues such as building durability, indoor air quality, and occupant health, safety, and comfort. With the measures described in this guide, builders in the hot-dry and mixed-dry climates can achieve homes that have whole house energy savings of 40% over the Building America benchmark (a home built to mid-1990s building practices roughly equivalent to the 1993 Model Energy Code) with no added overall costs for consumers. These best practices are based on the results of research and demonstration projects conducted by Building Americas research teams. The guide includes information for managers, designers, marketers, site supervisors, and subcontractors, as well as case studies of builders who are successfully building homes that cut energy use by 40% in the hot-dry and mixed-dry climates.

Baechler, Michael C.; Gilbride, Theresa L.; Hefty, Marye G.; Williamson, Jennifer L.; Ruiz, Kathleen A.; Bartlett, Rosemarie; Love, Pat M.

2009-10-23T23:59:59.000Z

458

Minimum-Hot-Spot Query Trees for Wireless Sensor Networks  

E-Print Network [OSTI]

an energy- efficient query routing tree. (a) Energy harvesting for battery- less nodes for the (b) Voltree to the querying node. Energy-efficient query routing trees are needed in a plethora of systems such as PeopleMinimum-Hot-Spot Query Trees for Wireless Sensor Networks Georgios Chatzimilioudis Dept

Zeinalipour, Demetris

459

Hot Data Centers vs. Cool Peers Sergiu Nedevschi  

E-Print Network [OSTI]

- plications such as Search and web portals has fueled the growth of large data centers. Modeling- erational costs of data centers, and hence it is important to understand whether, and when, alternate systemHot Data Centers vs. Cool Peers Sergiu Nedevschi , Sylvia Ratnasamy and Jitendra Padhye Intel

Chaudhuri, Surajit

460

Hot Data Centers vs. Cool Peers Sergiu Nedevschi  

E-Print Network [OSTI]

- plications such as Search and web portals has fueled the growth of large data centers. Modeling- erational costs of data centers, and hence it is important to understand whether, and when, alternate systemHot Data Centers vs. Cool Peers Sergiu Nedevschi , Sylvia Ratnasamy and Jitu Padhye Intel Reserch

California at Irvine, University of

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

On a mathematical model for hot carrier injection in semiconductors  

E-Print Network [OSTI]

On a mathematical model for hot carrier injection in semiconductors Naoufel Ben Abdallah (1) Pierre of a semiconductor device heavily depends on the injection mechanism of carriers into the active regions through by the relation V bi = U th log N + N \\Gamma ; where U th = kBT=q is the thermal voltage and N + ; N \\Gamma

Schmeiser, Christian

462

Hot context for organizational learning Charlotte FILLOL, Phd Student  

E-Print Network [OSTI]

1 Hot context for organizational learning Charlotte FILLOL, Phd Student CREPA, Research center.fillol@dauphine.fr ABSTRACT The organizational learning, studied in resource-based view, is a strategic resource (Wernerfelt 1999, Heraty 2005), and encouraging organizational learning become major issues in management sciences

Paris-Sud XI, Université de

463

Detachment Faulting & Geothermal Resources- Pearl Hot Spring, NV  

Broader source: Energy.gov [DOE]

DOE Geothermal Peer Review 2010 - Presentation. Project objective: Integration of new thermochronometric, structural and geological analyses, reflection and refraction seismic surveys and existing geophysical data into a 3-D Earth Model to elucidate the tectonic and 4-D thermal evolution of southern Clayton Valley and the Weepah Hills (Pearl Hot Spring geothermal play).

464

Dual-Phase Hot-Press Forming Alloy  

E-Print Network [OSTI]

of the fully martensitic alloys; In terms of uniform elongation, the dual­phase steel significantly outperformsDual-Phase Hot-Press Forming Alloy Hongliang Yi and H. K. D. H. Bhadeshia 23 April, 2010Non-propagating cracks in ferrite 840 oC 880 oC #12;Conclusion 6 · Conventional HPF steels: fully martensitic · Novel

Cambridge, University of

465

An Energy Analysis Of A Large, Multipurpose Educational Building In A Hot Climate  

E-Print Network [OSTI]

building The number of occupants for each zone has been calculated using the following equation: Number of occupants g3404 g4670Area of interior zoneg4666ft^2g4667/ maximum occupantsg4666ft^2/persong4667 g4671 g3400 percent of occupants during... occupied period Sensible load for each zone has been calculated by using the following equation: Sensible Loadg4666Btu/hrg4667 g3404 Sensible load per persong4666Btu/hr persong4667 g3400 Interior zone occupants during occupied period g4666persong4667...

Kamranzadeh, Vahideh

2012-02-14T23:59:59.000Z

466

Lessons and Measures Learned from Continuous Commissioning(SM) of Central Chilled/Hot Water Systems  

E-Print Network [OSTI]

water and hot water system operation. It can be performed before, during, or after building side continuous commissioning. Successful central chilled/hot water system CC not only results in improved production and distribution, but also achieves...

Deng, S.; Turner, W. D.; Claridge, D. E.; Bruner, H.; Chen, H.; Wei, G.

2001-01-01T23:59:59.000Z

467

E-Print Network 3.0 - alpha-gamma hot cell Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of a cell arriving at a switch input and being destined to the hot output (p... load to the switch input), and according to the given hot spot value. The generated cell is...

468

REPORT OF SURVEY OF OAK RIDGE BUILDING 3597 HOT STORAGE GARDEN  

Broader source: Energy.gov (indexed) [DOE]

BUILDING 3597 HOT STORAGE GARDEN U.S. Department of Energy Office of Environmental Management & Office of Science Report of Survey of Oak Ridge Building 3597 Hot Storage Garden...

469

E-Print Network 3.0 - alpha-gamma hot-cell facility Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

campaign, TRU waste material is be- ing removed from the Alpha Gamma Hot Cell facility in Building 212... shipments of other materials from the Alpha Gamma Hot Cell facility, ......

470

E-Print Network 3.0 - ac hot carrier Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of Physics and Astronomy, University of St Andrews Collection: Physics 72 HOT CARRIER SOALR CELLS : IN THE MAKING ? A. Le Bris1 Summary: HOT CARRIER SOALR CELLS : IN THE MAKING...

471

E-Print Network 3.0 - advanced hot section Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

advanced processors. Keywords Localized hot spot cooling. Thermoelectric, Peltier Cooling... 0-7803-XXXX-X0620.00 2006 IEEE 22nd IEEE SEMI-THERM Symposium Hot Spot...

472

Hot Gas Filtration of Fine and Ultra fine Particles with Liquid...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Hot Gas Filtration of Fine and Ultra fine Particles with Liquid Phase Sintered SiC Ceramic DPF Hot Gas Filtration of Fine and Ultra fine Particles with Liquid Phase Sintered SiC...

473

High-Throughput, High-Precision Hot Testing Tool for High-Brightness...  

Energy Savers [EERE]

Throughput, High-Precision Hot Testing Tool for High-Brightness Light-Emitting Diode Testing High-Throughput, High-Precision Hot Testing Tool for High-Brightness Light-Emitting...

474

Microbialsilica interactions in Icelandic hot spring sinter: possible analogues for some Precambrian siliceous stromatolites  

E-Print Network [OSTI]

Microbial±silica interactions in Icelandic hot spring sinter: possible analogues for some, UK àFossil Fuels and Environmental Geochemistry Postgraduate Institute, Drummond Building, University, in particular sections of microstromatolites growing at the Krisuvik hot spring, Iceland, reveals

Konhauser, Kurt

475

An occupational therapy intervention for residents with stroke related disabilities in UK care homes (OTCH): cluster randomised controlled trial  

E-Print Network [OSTI]

or drug addiction. Care home man- agers were offered a full explanation of the study. No care homes were actively delivering occupational ther- apy as a component of standard care. Once the managers had given informed consent, care home staff searched... to the treatment allo- cation of care homes. intervention and control Residents in the control arm received usual care. This did not involve an occupational therapy component. The occupational therapy intervention at the level of the care home resident followed...

Sackley, Catherine M.; Walker, Marion F.; Burton, Chris R.; Watkins, Caroline L.; Mant, Jonathan; Roalfe, Andrea K; Wheatley, Keith; Sheehan, Bart; Sharp, Leslie; Stant, Katie E; Fletcher-Smith, Joanna; Steel, Kerry; Wilde, Kate; Irvine, Lisa; Peryer, Guy

2015-02-05T23:59:59.000Z

476

Seismic Line Location Map Hot Pot Project, Humboldt County, Nevada 2010  

SciTech Connect (OSTI)

Location of seismic lines carried out under DOE funded project Advanced Seismic Data Analysis Program (The Hot Pot Project).

Lane, Michael

2012-01-01T23:59:59.000Z

477

Seismic Line Location Map Hot Pot Project, Humboldt County, Nevada 2010  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Location of seismic lines carried out under DOE funded project Advanced Seismic Data Analysis Program (The Hot Pot Project).

Lane, Michael

478

Constituent Particle Break-up during Hot Rolling of AA 5182 Nicolas Moulin(1)  

E-Print Network [OSTI]

Constituent Particle Break-up during Hot Rolling of AA 5182 Nicolas Moulin(1) , Estelle Parra hot reversible rolling of AA5182 alloy sheets has been analysed. The sizes and shapes of intermetallic particles in as-cast and industrially hot rolled AA5182 alloys sheets were characterized by 3D X ray

Paris-Sud XI, Université de

479

Near-Optimal Hot-Potato Routing on Trees Costas Busch1  

E-Print Network [OSTI]

Near-Optimal Hot-Potato Routing on Trees Costas Busch1 , Malik Magdon-Ismail1 , Marios Mavronicolas of Cyprus, Nicosia CY-1678, Cyprus 3 ETH Zurich, 8092 Zurich, Switzerland Abstract. In hot-potato on arbitrary tree topologies with n nodes. We present two hot-potato routing algorithms, one deterministic

Mavronicolas, Marios

480

Near-Optimal Hot-Potato Routing on Trees Costas Busch1  

E-Print Network [OSTI]

Near-Optimal Hot-Potato Routing on Trees Costas Busch1 , Malik Magdon-Ismail1 , Marios Mavronicolas of Cyprus, Nicosia CY-1678, Cyprus 3 ETH Zurich, 8092 Zurich, Switzerland Abstract. In hot-potato on arbitrary tree topologies. We present two hot-potato routing algorithms, one deterministic and one

Magdon-Ismail, Malik

Note: This page contains sample records for the topic "occupancy toll hot" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

~O(Congestion + Dilation) Hot-Potato Routing on Leveled Networks Costas Busch  

E-Print Network [OSTI]

~O(Congestion + Dilation) Hot-Potato Routing on Leveled Networks Costas Busch Rensselaer that matches the lower bound (C + D). Motivated from optical networks, we study the extreme case of hot-potato routing in which the nodes are bufferless. In hot-potato routing, packets may be unable to follow

Busch, Konstantin "Costas"

482

Near-Optimal Hot-Potato Routing on Trees Costas Busch  

E-Print Network [OSTI]

Near-Optimal Hot-Potato Routing on Trees Costas Busch Malik Magdon-Ismail Marios Mavronicolas Roger Wattenhofer§ February 8, 2004 Abstract In hot-potato (deflection) routing, nodes in the network have. Denote by rt the optimal routing time for a given routing problem. We construct the first hot-potato

Busch, Konstantin "Costas"

483

A `Hot Potato' Gray Code for Permutations Xi Sisi Shen 1,3  

E-Print Network [OSTI]

A `Hot Potato' Gray Code for Permutations Xi Sisi Shen 1,3 Department of Mathematics and Statistics by the chil- dren's game of Hot Potato. Our order is a transposition Gray code, meaning that consecutive) It must transpose value n (the "hot potato"); (2) It must transpose positions that are circularly adjacent

Williams, Aaron

484

Mineral fiber content of lung tissue in patients with environmental exposures: household contacts vs building occupants  

SciTech Connect (OSTI)

Analysis of tissue mineral fiber content in patients with environmental exposures has seldom been reported in the past. Our studies of six household contacts of asbestos workers indicate that these individuals often have pulmonary asbestos concentrations similar to some occupationally exposed individuals. In contrast, our studies of four occupants of buildings with asbestos-containing materials indicate that these individuals often have pulmonary asbestos burdens indistinguishable from the general nonoccupationally exposed population. However, one such building occupant exposed for many years and who later developed pleural mesothelioma was studied in detail, and it was concluded that her exposure as a teacher's aide in a school building containing acoustical plaster was the likely cause of her mesothelioma.

Roggli, V.L.; Longo, W.E. (Department of Pathology, Durham Veterans Administration, NC (United States))

1991-12-31T23:59:59.000Z

485

Proposed Occupational Exposure Limits for Non-Carcinogenic Hanford Waste Tank Vapor Chemicals  

SciTech Connect (OSTI)

A large number of volatile chemicals have been identified in the headspaces of tanks used to store mixed chemical and radioactive waste at the U.S. Department of Energy (DOE) Hanford Site, and there is concern that vapor releases from the tanks may be hazardous to workers. Contractually established occupational exposure limits (OELs) established by the Occupational Safety and Health Administration (OSHA) and American Conference of Governmental Industrial Hygienists (ACGIH) do not exist for all chemicals of interest. To address the need for worker exposure guidelines for those chemicals that lack OSHA or ACGIH OELs, a procedure for assigning Acceptable Occupational Exposure Limits (AOELs) for Hanford Site tank farm workers has been developed and applied to a selected group of 57 headspace chemicals.

Poet, Torka S.; Timchalk, Chuck

2006-03-24T23:59:59.000Z

486

Overheating in Hot Water- and Steam-Heated Multifamily Buildings  

SciTech Connect (OSTI)

Apartment temperature data have been collected from the archives of companies that provide energy management systems (EMS) to multifamily buildings in the Northeast U.S. The data have been analyzed from more than 100 apartments in eighteen buildings where EMS systems were already installed to quantify the degree of overheating. This research attempts to answer the question, 'What is the magnitude of apartment overheating in multifamily buildings with central hot water or steam heat?' This report provides valuable information to researchers, utility program managers and building owners interested in controlling heating energy waste and improving resident comfort. Apartment temperature data were analyzed for deviation from a 70 degrees F desired setpoint and for variation by heating system type, apartment floor level and ambient conditions. The data shows that overheating is significant in these multifamily buildings with both hot water and steam heating systems.

Dentz, J.; Varshney, K.; Henderson, H.

2013-10-01T23:59:59.000Z

487

Hot metal Si control at Kwangyang blast furnaces  

SciTech Connect (OSTI)

Studies of Si transfer in blast furnaces have shown that the Si level in pig iron is influenced more by the reaction of silicon oxide gas generation in the raceway than the chemical reaction between hot metal and slag at the drop zone. Specifications require a Si content of pig iron below 0.15% at the Kwangyang Works, but the use of soft coking coal in the blend for coke ovens, high pulverized coal injection rate into the blast furnace, and the application of lower grade iron ore has resulted in the need to develop methods to control Si in hot metal. In this paper, the results of in furnace Si control and the desiliconization skills at the casthouse floor are described.

Hur, N.S.; Cho, B.R.; Kim, G.Y.; Choi, J.S.; Kim, B.H. [POSCO, Cheollanamdo (Korea, Republic of). Kwangyang Works

1995-12-01T23:59:59.000Z

488

Nebraska city station emdash hot to cold esp conversion  

SciTech Connect (OSTI)

Omaha Public Power District's Nebraska City Unit 1, is a 585 MW net coal fueled power plant which burns low-sulfur Powder River Basin coal. The unit was originally designed and constructed with a fully enclosed hot-side rigid frame electrostatic precipitator. However, the original precipitator was unable to reliably and continuously maintain stack opacity and particulate emissions levels while operating at high loads. Therefore the hot-side precipitator was modified internally and converted to cold-side operation. The unit's four regenerative air heaters were relocated to an area underneath the boiler backpass and the ductwork was modified extensively. In addition, significant internal precipitator modifications were made. This paper describes the conversion design, construction, and resulting performance improvements.

Duncan, B.L.; Ferguson, A.W.; Wicina, R.C. (Black and Veatch Consulting Engineers, Kansas City, MO (United States)); Campbell, D.B.; Kotan, R.M.; Roth, K.A. (Omaha Public Power District, NE (United States))

1990-01-01T23:59:59.000Z

489

Charmonium in a hot medium: melting vs absorption  

E-Print Network [OSTI]

A charmonium produced in heavy ion collisions at RHIC and LHC propagates through a dense co-moving matter with a rather high relative momentum, =4-10GeV^2. In spite of Debye screening of the binding potential, the charmonium survives with a substantial probability, even if the c-cbar potential is completely screened in the hot environment. In addition, the color-exchange interaction with the medium is another important source of charmonium suppression. Attenuation in a hot medium caused by both effects is evaluated by means of the path integral technique, which requires ability of boosting the binding potential to a moving reference frame. This problem is solved in the approximation of small intrinsic velocities of the charmed quarks.

B. Z. Kopeliovich; I. K. Potashnikova; Ivan Schmidt; M. Siddikov

2014-08-11T23:59:59.000Z

490

Multiband Tunable Large Area Hot Carrier Plasmonic-Crystal Photodetectors  

E-Print Network [OSTI]

Optoelectronic functionalities of photodection and light harnessing rely on the band-to-band excitation of semiconductors, thus the spectral response of the devices is dictated and limited by their bandgap. A novel approach, free from this restriction, is to harvest the energetic electrons generated by the relaxation of a plasmonic resonance in the vicinity of a metal-semiconductor junction. In this configuration, the optoelectronic and spectral response of the detectors can be designed ad hoc just by tailoring the topology of metal structures, which has tremendous applications in solar energy harvesting and photodetection. Fully exploiting hot electron based optoelectronics yet requires a platform that combines their exotic spectral capabilities with large scale manufacturing and high performance. Herein we report the first implementation of a large area, low cost quasi 3D plasmonic crystal (PC) for hot electron photodetection, showcasing multiband selectivity in the VIS-NIR and unprecedented responsivity of...

de Arquer, F Pelayo Garca; Konstantatos, Gerasimos

2014-01-01T23:59:59.000Z

491

Evaporation rate of hot Jupiters and formation of Chthonian planets  

E-Print Network [OSTI]

Among the hundred of known extrasolar planets, about 15% are closer than 0.1 AU from their parent stars. But there are extremely few detections of planets orbiting in less than 3 days. At this limit the planet HD209458b has been found to have an extended upper atmosphere of escaping hydrogen. This suggests that the so-called hot Jupiters which are close to their parent stars could evaporate. Here we estimate the evaporation rate of hydrogen from extrasolar planets in the star vicinity. With high exospheric temperatures, and owing to the tidal forces, planets evaporate through a geometrical blow-off. This may explain the absence of Jupiter mass planets below a critical distance from the stars. Below this critical distance, we infer the existence of a new class of planets made of the residual central core of former hot Jupiters, which we propose to call the ``Chthonian'' planets.

G. Hbrard; A. Lecavelier des tangs; A. Vidal-Madjar; J. -M. Dsert; R. Ferlet

2003-12-15T23:59:59.000Z

492

Quantitative analysis of inclusion distributions in hot pressed silicon carbide  

SciTech Connect (OSTI)

ABSTRACT Depth of penetration measurements in hot pressed SiC have exhibited significant variability that may be influenced by microstructural defects. To obtain a better understanding regarding the role of microstructural defects under highly dynamic conditions; fragments of hot pressed SiC plates subjected to impact tests were examined. Two types of inclusion defects were identified, carbonaceous and an aluminum-iron-oxide phase. A disproportionate number of large inclusions were found on the rubble, indicating that the inclusion defects were a part of the fragmentation process. Distribution functions were plotted to compare the inclusion populations. Fragments from the superior performing sample had an inclusion population consisting of more numerous but smaller inclusions. One possible explanation for this result is that the superior sample withstood a greater stress before failure, causing a greater number of smaller inclusions to participate in fragmentation than in the weaker sample.

Michael Paul Bakas

2012-12-01T23:59:59.000Z

493

3D Model of the Neal Hot Springs Geothermal Area  

SciTech Connect (OSTI)

The Neal Hot Springs geothermal system lies in a left-step in a north-striking, west-dipping normal fault system, consisting of the Neal Fault to the south and the Sugarloaf Butte Fault to the north (Edwards, 2013). The Neal Hot Springs 3D geologic model consists of 104 faults and 13 stratigraphic units. The stratigraphy is sub-horizontal to dipping <10 degrees and there is no predominant dip-direction. Geothermal production is exclusively from the Neal Fault south of, and within the step-over, while geothermal injection is into both the Neal Fault to the south of the step-over and faults within the step-over.

Faulds, James E.

2013-12-31T23:59:59.000Z

494

3D Model of the Neal Hot Springs Geothermal Area  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

The Neal Hot Springs geothermal system lies in a left-step in a north-striking, west-dipping normal fault system, consisting of the Neal Fault to the south and the Sugarloaf Butte Fault to the north (Edwards, 2013). The Neal Hot Springs 3D geologic model consists of 104 faults and 13 stratigraphic units. The stratigraphy is sub-horizontal to dipping <10 degrees and there is no predominant dip-direction. Geothermal production is exclusively from the Neal Fault south of, and within the step-over, while geothermal injection is into both the Neal Fault to the south of the step-over and faults within the step-over.

Faulds, James E.

495

Advanced Hot Section Materials and Coatings Test Rig  

SciTech Connect (OSTI)

Phase I of the Hyperbaric Advanced Hot Section Materials & Coating Test Rig Program has been successfully completed. Florida Turbine Technologies has designed and planned the implementation of a laboratory rig capable of simulating the hot gas path conditions of coal gas fired industrial gas turbine engines. Potential uses of this rig include investigations into environmental attack of turbine materials and coatings exposed to syngas, erosion, and thermal-mechanical fatigue. The principle activities during Phase 1 of this project included providing several conceptual designs for the test section, evaluating various syngas-fueled rig combustor concepts, comparing the various test section concepts and then selecting a configuration for detail design. Conceptual definition and requirements of auxiliary systems and facilities were also prepared. Implementation planning also progressed, with schedules prepared and future project milestones defined. The results of these tasks continue to show rig feasibility, both technically and economically.

Dan Davis

2006-09-30T23:59:59.000Z

496

A biophysical model of prokaryotic diversity in geothermal hot springs  

E-Print Network [OSTI]

Recent field investigations of photosynthetic bacteria living in geothermal hot spring environments have revealed surprisingly complex ecosystems, with an unexpected level of genetic diversity. One case of particular interest involves the distribution along hot spring thermal gradients of genetically distinct bacterial strains that differ in their preferred temperatures for reproduction and photosynthesis. In such systems, a single variable, temperature, defines the relevant environmental variation. In spite of this, each region along the thermal gradient exhibits multiple strains of photosynthetic bacteria adapted to several distinct thermal optima, rather than the expected single thermal strain adapted to the local environmental temperature. Here we analyze microbiology data from several ecological studies to show that the thermal distribution field data exhibit several universal features independent of location and specific bacterial strain. These include the distribution of optimal temperatures of differe...

Klales, Anna; Nett, Elizabeth Janus; Kane, Suzanne Amador

2008-01-01T23:59:59.000Z

497

High pressure generation by hot electrons driven ablation  

SciTech Connect (OSTI)

A previous model [Piriz et al. Phys. Plasmas 19, 122705 (2012)] for the ablation driven by the hot electrons generated in collisionless laser-plasma interactions in the framework of shock ignition is revisited. The impact of recent results indicating that for a laser wavelength ? = 0.35 ?m the hot electron temperature ?{sub H} would be independent of the laser intensity I, on the resulting ablation pressure is considered. In comparison with the case when the scaling law ?{sub H}?(I?{sup 2}){sup 1/3} is assumed, the generation of the high pressures needed for driving the ignitor shock may be more demanding. Intensities above 10{sup 17} W/cm{sup 2} would be required for ?{sub H}=25?30 keV.

Piriz, A. R. [E.T.S.I. Industriales, CYTEMA, and Instituto de Investigaciones Energticas, Universidad de Castilla-La Mancha, 13071 Ciudad Real (Spain)] [E.T.S.I. Industriales, CYTEMA, and Instituto de Investigaciones Energticas, Universidad de Castilla-La Mancha, 13071 Ciudad Real (Spain); Piriz, S. A. [Facultad de Ciencias Fsicas, Universidad Complutense de Madrid, 28040 Madrid (Spain)] [Facultad de Ciencias Fsicas, Universidad Complutense de Madrid, 28040 Madrid (Spain); Tahir, N. A. [GSI Helmholtzzentrum fr Schwerionenforschung, Planckstrasse 1, 64291 Darmstadt (Germany)] [GSI Helmholtzzentrum fr Schwerionenforschung, Planckstrasse 1, 64291 Darmstadt (Germany)

2013-11-15T23:59:59.000Z

498

Stanford University Occupational Health Center Protecting Your Health and Safety at Work Central to supporting and promoting a culture of safety at Stanford is the Stanford University Occupational Health  

E-Print Network [OSTI]

to supporting and promoting a culture of safety at Stanford is the Stanford University OccupationalStanford University Occupational Health Center Protecting Your Health and Safety at Work Central Health Center (SUOHC). The SUOHC is part of the Office of Environmental Health & Safety and has two

Kay, Mark A.

499

Hanford spent nuclear fuel hot conditioning system test procedure  

SciTech Connect (OSTI)

This document provides the test procedures for cold testing of the prototype Hot Conditioning System (HCS) at the 306E Facility. The primary objective of this testing is to confirm design choices and provide data for the detailed design package prior to procurement of the process equipment. The current scope of testing in this document includes a fabricability study of the HCS, equipment performance testing of the HCS components, heat-up and cool-down cycle simulation, and robotic arm testing.

Cleveland, K.J.

1997-09-16T23:59:59.000Z

500

Heating of Oil Well by Hot Water Circulation  

E-Print Network [OSTI]

When highly viscous oil is produced at low temperatures, large pressure drops will significantly decrease production rate. One of possible solutions to this problem is heating of oil well by hot water recycling. We construct and analyze a mathematical model of oil-well heating composed of three linear parabolic PDE coupled with one Volterra integral equation. Further on we construct numerical method for the model and present some simulation results.

Mladen Jurak; Zarko Prnic

2005-03-04T23:59:59.000Z