Powered by Deep Web Technologies
Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Abstract --This panel session paper outlines one of the re-search thrust areas in the Power System Engineering Research  

E-Print Network [OSTI]

1 Abstract -- This panel session paper outlines one of the re- search thrust areas in the Power- tential of harnessing the inherent flexibility of certain load types such as heating and cooling and PHEV for massive penetration of renewable resources such as wind and solar power into the mix of elec- tricity

Oren, Shmuel S.

2

NY Green Bank  

Broader source: Energy.gov (indexed) [DOE]

Public Meeting in New York, NY: Energy Infrastructure Finance The conventional clean energy capital markets for large scale infrastructure are deep and robust. These markets...

3

Department of Economic Development EMERGENCY RULE MAKING START-UP NY Program  

E-Print Network [OSTI]

Department of Economic Development EMERGENCY RULE MAKING START-UP NY Program I.D. No. EDV-31 into law the SUNY Tax-free Areas to Revitalize and Transform UPstate New York (START-UP NY) program, which affiliated with New York universities and colleges. The START-UP NY program will leverage these tax benefits

Suzuki, Masatsugu

4

Solar Panel Anomaly Detection and Classification.  

E-Print Network [OSTI]

??The number of solar panels deployed worldwide has rapidly increased. Solar panels are often placed in areas not easily accessible. It is also difficult for… (more)

Hu, Bo

2012-01-01T23:59:59.000Z

5

Final Focus Area Selection Report 255 Fuller Road, Suite 274, Albany, NY 12203 USA (518) 437-8661 / Fax: (518) 437-8659  

E-Print Network [OSTI]

existing facilities. Wind plant capacity factors were calculated by matching wind map-derived resource statistics with a generic turbine power curve reflecting current megawatt-scale wind technologies. 2 for Task 2 (Selection of Focus Areas) of the Energy Commission project "Wind Energy Resource Modeling

6

Venice Sustainability Advisory Panel  

E-Print Network [OSTI]

Venice Sustainability Advisory PanelFINAL REPORT Venice Sustainability Advisory Panel FinalInvestigator The Venice Sustainability Advisory Panel (

2009-01-01T23:59:59.000Z

7

Panel 3 - characterization  

SciTech Connect (OSTI)

The task of this panel was to identify and prioritize needs in the area of characterization of diamond and diamond-like-carbon (DLC) films for use in the transportation industry. Until recent advances in production of inexpensive films of diamonds and DLC, it was not feasible that these materials could be mass produced. The Characterization Panel is restricting itself to identifying needs in areas that would be most useful to manufacturers and users in producing and utilizing diamond and DLC coatings in industry. These characterization needs include in-situ monitoring during growth, relation of structure to performance, and standards and definitions.

Erck, R.A.; Erdemir, A.; Janghsing Hsieh; Lee, R.H.; Xian Zheng Pan; Deming Shu [Argonne National Lab., IL (United States); Feldman, A. [National Inst. of Standards and Technology, Gaithersburg, MD (United States); Glass, J.T. [North Carolina State Univ., Raleigh (United States); Kleimer, R. [Coors Ceramics Co., Golden, CO (United States); Lawton, E.A. [JPL/Caltech, Pasadena, CA (United States); McHargue, C.J. [Univ. of Tennessee, Knoxville (United States)

1993-01-01T23:59:59.000Z

8

Interconnection Panel  

Broader source: Energy.gov [DOE]

Presentation—given at at the Fall 2012 Federal Utility Partnership Working Group (FUPWG) meeting—discusses the interconnection panel, including an overview of the generation interconnection process (GIP), and interconnection agreements and their terms.

9

Table 2 -Lime use and practices on Corn, major producing states, 2001 CO GA IL IN IA KS KY MI MN MO NE NY NC ND OH PA SD TX WI Area  

E-Print Network [OSTI]

Table 2 - Lime use and practices on Corn, major producing states, 2001 CO GA IL IN IA KS KY MI MN.7 Table 2 - Lime use and practices on Corn, major producing states, 2000 CO IL IN IA KS KY MI MN MO NE NY use and practices on Corn, major producing states, 1999 CO IL IN IA KS KY MI MN MO NE NC OH SD TX WI

Kammen, Daniel M.

10

Sylvania Corporation, Hicksville, NY and Bayside, NY | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security AdministrationcontrollerNanocrystalline GalliumSuppressionSustainable SuccessSustainableL L 28, 2004 |NY

11

NY.O-20- I  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545 OCT 28 1% - :NEW; I.-' NY.O-20- I ' 3% 3

12

NY  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofofOxford SiteToledo SiteTonawandaUniversity21 theB DocumentGKNY 17.8

13

Large-Area Plasma-Panel Radiation Detectors for Nuclear Medicine Imaging to Homeland Security and the Super Large Hadron Collider  

E-Print Network [OSTI]

A new radiation sensor derived from plasma panel display technology is introduced. It has the capability to detect ionizing and non-ionizing radiation over a wide energy range and the potential for use in many applications. The principle of operation is described and some early results presented.

Friedman, Peter S; Chapman, J Wehrley; Levin, Daniel S; Weaverdyck, Curtis; Zhou, Bing; Benhammou, Yan; Etzion, Erez; Moshe, M Ben; Silver, Yiftah; Beene, James R; Varner, Robert L

2010-01-01T23:59:59.000Z

14

SSRL- Proposal Review Panel  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Stanford Synchrotron Radiation Lab search Go an error occurred while processing this directive Proposal Review Panel Sub Panels Structural Molecular Biology & Biophysics...

15

OLED area illumination source  

DOE Patents [OSTI]

The present invention relates to an area illumination light source comprising a plurality of individual OLED panels. The individual OLED panels are configured in a physically modular fashion. Each OLED panel comprising a plurality of OLED devices. Each OLED panel comprises a first electrode and a second electrode such that the power being supplied to each individual OLED panel may be varied independently. A power supply unit capable of delivering varying levels of voltage simultaneously to the first and second electrodes of each of the individual OLED panels is also provided. The area illumination light source also comprises a mount within which the OLED panels are arrayed.

Foust, Donald Franklin (Scotia, NY); Duggal, Anil Raj (Niskayuna, NY); Shiang, Joseph John (Niskayuna, NY); Nealon, William Francis (Gloversville, NY); Bortscheller, Jacob Charles (Clifton Park, NY)

2008-03-25T23:59:59.000Z

16

Panel 4 - applications to transportation  

SciTech Connect (OSTI)

The aim of this group was to compile a listing of current and anticipated future problem areas in the transportation industry where the properties of diamond and DLC films make them especially attractive and where the panel could strongly endorse the establishment of DOE/Transportation Industry cooperative research efforts. This section identifies the problem areas for possible applications of diamond/DLC technology and presents indications of current approaches to these problems.

Nichols, F. [Argonne National Lab., IL (United States); Au, J. [Sundstrand Aerospace, Rockford, IL (United States); Bhattacharya, R. [Universal Energy Systems, Inc., Dayton, OH (United States); Bhushan, B. [Ohio State Univ., Columbus (United States); Blunier, D. [Caterpillar, Inc., Peoria, IL (United States); Boardman, B. [Deere & Co., Moline, IL (United States); Brombolich, L. [Compu-Tec Engineering, Chesterfield, MO (United States); Davidson, J. [Vanderbilt Univ., Nashville, TN (United States); Graham, M. [Northwestern Univ., Evanston, IL (United States); Hakim, N. [Detroit Diesel Corp., MI (United States); Harris, K. [Dubbeldee Harris Diamond Corp., Mt. Arlington, NJ (United States); Hay, R. [Norton Diamond Film, Northboro, MA (United States); Herk, L. [Southwest Research Inst., Southfield, MI (United States); Hojnacki, H.; Rourk, D. [Intelligent Structures Incorporated, Canton, MI (United States); Kamo, R. [Adiabatics, Inc., Columbus, IN (United States); Nieman, B. [Allied-Signal Inc., Des Plaines, IL (United States); O`Neill, D. [3M, St. Paul, MN (United States); Peterson, M.B. [Wear Sciences, Arnold, MD (United States); Pfaffenberger, G. [Allison Gas Turbine, Indianapolis, IN (United States); Pryor, R.W. [Wayne State Univ., Detroit, MI (United States); Russell, J. [Superconductivity Publications, Inc., Somerset, NJ (United States); Syniuta, W. [Advanced Mechanical Technology, Inc., Newton, MA (United States); Tamor, M. [Ford Motor Co., Dearborn, MI (United States); Vojnovich, T. [Dept. of Energy, Washington, DC (United States); Yarbrough, W. [Pennsylvania State Univ., University Park (United States); Yust, C.S. [Oak Ridge National Lab., TN (United States)

1993-01-01T23:59:59.000Z

17

Geothermal energy and district heating in Ny-Ĺlesund, Svalbard .  

E-Print Network [OSTI]

??This thesis presents the possibilities for using shallow geothermal energy for heating purposes in Ny-Ĺlesund. The current energy supply in Ny-Ĺlesund is a diesel generator,… (more)

Iversen, Julianne

2013-01-01T23:59:59.000Z

18

Panel Organization 1. Panel on Structural Geology & Geoengineering  

E-Print Network [OSTI]

Appendix A Panel Organization 1. Panel on Structural Geology & Geoengineering Chair: Dr. Clarence R Technical Exchange (open) Panel on Structural Geology & Geoengineering Denver, Colorado Topic: DOE & Performance Analysis and the Panel on Structural Geology & Geoengineering Denver, Colorado Topic: Repository

19

Project focus: Complete design of an interactive solar panel system to be situated on  

E-Print Network [OSTI]

Project focus: · Complete design of an interactive solar panel system to be situated on top the effective area · Two types of solar cells: · 3 panel configurations: · Real-time power output data Si panels with 30.0o tilt c) 10 CdTe panels; 38.5o tilt · Solar insolation recorder, thermometer

20

for doubling solar panel  

E-Print Network [OSTI]

An outline for doubling solar panel efficiency C o l o ra do S c ho o l of M i ne s Ma g a z i ne Take a look at a solar panel on a sunny Colorado day and, if you're like most people, you won't see physics professor and solar energy researcher, who admits to checking out his panels and their energy

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Lighting Technology Panel  

Broader source: Energy.gov [DOE]

Presentation covers the Lighting Technology Panel for the Federal Utility Partnership Working Group (FUPWG) meeting, held on November 18-19, 2009. 

22

Solar reflection panels  

DOE Patents [OSTI]

A solar collector comprising a glass mirror, and a composite panel, wherein the back of the mirror is affixed to a front surface of the composite panel. The composite panel comprises a front sheet affixed to a surface of a core material, preferably a core material comprising a honeycomb structure, and a back sheet affixed to an opposite surface of the core material. The invention may further comprise a sealing strip, preferably comprising EPDM, positioned between the glass mirror and the front surface of the composite panel. The invention also is of methods of making such solar collectors.

Diver, Jr., Richard B. (Albuquerque, NM); Grossman, James W. (Albuquerque, NM); Reshetnik, Michael (Boulder, CO)

2006-07-18T23:59:59.000Z

23

Northeast - NY NJ CT PA Area | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoading map...(Utility Company)References ↑ US Census BureauNorthbrook, Ohio: EnergyJump to:

24

Northeast - NY NJ CT PA Area | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's HeatMexico:Community NominationsCarolina‎ |NAE/Enel NorthMiddleNortheast

25

Flexible optical panel  

DOE Patents [OSTI]

A flexible optical panel includes laminated optical waveguides, each including a ribbon core laminated between cladding, with the core being resilient in the plane of the core for elastically accommodating differential movement thereof to permit winding of the panel in a coil.

Veligdan, James T. (Manorville, NY)

2001-01-01T23:59:59.000Z

26

,"Waddington, NY Natural Gas Pipeline Imports From Canada (MMcf...  

U.S. Energy Information Administration (EIA) Indexed Site

Imports From Canada (MMcf)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Waddington, NY...

27

,"Massena, NY Natural Gas Pipeline Imports From Canada (MMcf...  

U.S. Energy Information Administration (EIA) Indexed Site

Imports From Canada (MMcf)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Massena, NY...

28

,"Champlain, NY Natural Gas Pipeline Imports From Canada (MMcf...  

U.S. Energy Information Administration (EIA) Indexed Site

Champlain, NY Natural Gas Pipeline Imports From Canada (MMcf)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest...

29

Upstate NY Power Corp | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revisionEnvReviewNonInvasiveExplorationUT-gTagusparkCalculator JumpUnited States:DelawareSchool SectorUpstate NY

30

Category:Syracuse, NY | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectricEnergyCTBarreis aCallahanWindSyracuse, NY Jump to: navigation, search Go

31

NlZWYORK4,N.Y.  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545 OCT 28 1% - :NEW; I.-' NY.O-20- IAFRICAN

32

Western NY Energy LLC | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:SeadovCooperative Jump to: navigation,Western Cooling Efficiency Center Place:GeothermalNY

33

AREA  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy Cooperation |South Valley ResponsibleSubmissionofDepartmentNo.7-052 ofFocusAREA FAQ #

34

My Favorite OLED Panel  

Energy Savers [EERE]

My Favorite OLED Panel Basar Erdener Sun and Snow Photo Courtesy 2009-2015 Kvikken 2 Sizable 3 Sizable Photo Courtesy Printmeneer on Etsy 4 5 Shapeable Photo Courtesy Dia...

35

Gas filled panel insulation  

DOE Patents [OSTI]

A structural or flexible highly insulative panel which may be translucent, is formed from multi-layer polymeric material in the form of an envelope surrounding a baffle. The baffle is designed so as to minimize heat transfer across the panel, by using material which forms substantially closed spaces to suppress convection of the low conductivity gas fill. At least a portion of the baffle carries a low emissivity surface for suppression of infrared radiation. 18 figures.

Griffith, B.T.; Arasteh, D.K.; Selkowitz, S.E.

1993-12-14T23:59:59.000Z

36

Oven wall panel construction  

DOE Patents [OSTI]

An oven roof or wall is formed from modular panels, each of which comprises an inner fabric and an outer fabric. Each such fabric is formed with an angle iron framework and somewhat resilient tie-bars or welded at their ends to flanges of the angle irons to maintain the inner and outer frameworks in spaced disposition while minimizing heat transfer by conduction and permitting some degree of relative movement on expansion and contraction of the module components. Suitable thermal insulation is provided within the module. Panels or skins are secured to the fabric frameworks and each such skin is secured to a framework and projects laterally so as slidingly to overlie the adjacent frame member of an adjacent panel in turn to permit relative movement during expansion and contraction.

Ellison, Kenneth (20 Avondale Cres., Markham, CA); Whike, Alan S. (R.R. #1, Caledon East, both of Ontario, CA)

1980-04-22T23:59:59.000Z

37

,"Niagara Falls, NY Natural Gas Pipeline Exports to Canada (MMcf...  

U.S. Energy Information Administration (EIA) Indexed Site

Exports to Canada (MMcf)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Niagara Falls, NY...

38

RenewableNY - An Industrial Energy Conservation Initiative  

SciTech Connect (OSTI)

The New York Industrial Retention Network (NYIRN) manages the RenewableNY program to assist industrial companies in New York City to implement energy efficiency projects. RenewableNY provides companies with project management assistance and grants to identify opportunities for energy savings and implement energy efficiency projects. The program helps companies identify energy efficient projects, complete an energy audit, and connect with energy contractors who install renewable energy and energy efficient equipment. It also provides grants to help cover the costs of installation for new systems and equipment. RenewableNY demonstrates that a small grant program that also provides project management assistance can incentivize companies to implement energy efficiency projects that might otherwise be avoided. Estimated savings through RenewableNY include 324,500 kWh saved through efficiency installations, 158 kW of solar energy systems installed, and 945 thm of gas avoided.

Lubarr, Tzipora

2009-09-30T23:59:59.000Z

39

Industry Partners Panel  

Broader source: Energy.gov [DOE]

Industry Panel presenters include: Michael G. Andrew, Director - Academic and Technical Programs, Advanced Products and Materials, Johnson Controls Power Solutions Michael A. Fetcenko, Vice President and Managing Director, BASF Battery Materials – Ovonic, BASF Corporation Adam Kahn, Founder and CEO, AKHAN Technologies, Inc. Stephen E. Zimmer, Executive Director, United States Council for Automotive Research (USCAR)

40

2Name ________________________________ Question 1: What is the usable area  

E-Print Network [OSTI]

the area of a satellite solar panel and estimate the total electrical power that can be generated. Students, the maximum panel area is 12,240 sq. cm, so (8100/12240)x100% = 66% of the panel is covered by solar cells shown below? Question 2: What electrical power can be generated by the panel? Question 3: If there are 8

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Overview of seismic panel activities  

SciTech Connect (OSTI)

In January 1991, the DOE-EM appointed a Seismic Panel to develop seismic criteria that can be used for evaluation of underground storage tanks containing high level radioactive wastes. The Panel expects to issue the first draft of the criteria report in January 1992. This paper provides an overview of the Panel's activities and briefly discusses the criteria. 3 refs.

Bandyopadhyay, K.K.

1991-01-01T23:59:59.000Z

42

Photovoltaic panel clamp  

DOE Patents [OSTI]

A photovoltaic panel clamp includes an upper and lower section. The interface between the assembled clamp halves and the module edge is filled by a flexible gasket material, such as EPDM rubber. The gasket preferably has small, finger like protrusions that allow for easy insertion onto the module edge while being reversed makes it more difficult to remove them from the module once installed. The clamp includes mounting posts or an integral axle to engage a bracket. The clamp also may include a locking tongue to secure the clamp to a bracket.

Mittan, Margaret Birmingham (Oakland, CA); Miros, Robert H. J. (Fairfax, CA); Brown, Malcolm P. (San Francisco, CA); Stancel, Robert (Loss Altos Hills, CA)

2012-06-05T23:59:59.000Z

43

Photovoltaic panel clamp  

DOE Patents [OSTI]

A photovoltaic panel clamp includes an upper and lower section. The interface between the assembled clamp halves and the module edge is filled by a flexible gasket material, such as EPDM rubber. The gasket preferably has small, finger like protrusions that allow for easy insertion onto the module edge while being reversed makes it more difficult to remove them from the module once installed. The clamp includes mounting posts or an integral axle to engage a bracket. The clamp also may include a locking tongue to secure the clamp to a bracket.

Brown, Malcolm P.; Mittan, Margaret Birmingham; Miros, Robert H. J.; Stancel, Robert

2013-03-19T23:59:59.000Z

44

Concentrating photovoltaic solar panel  

DOE Patents [OSTI]

The present invention relates to photovoltaic power systems, photovoltaic concentrator modules, and related methods. In particular, the present invention features concentrator modules having interior points of attachment for an articulating mechanism and/or an articulating mechanism that has a unique arrangement of chassis members so as to isolate bending, etc. from being transferred among the chassis members. The present invention also features adjustable solar panel mounting features and/or mounting features with two or more degrees of freedom. The present invention also features a mechanical fastener for secondary optics in a concentrator module.

Cashion, Steven A; Bowser, Michael R; Farrelly, Mark B; Hines, Braden E; Holmes, Howard C; Johnson, Jr., Richard L; Russell, Richard J; Turk, Michael F

2014-04-15T23:59:59.000Z

45

Proposal Study Panels  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for Plutonium CleanupProposal Study Panels Print

46

Proposal Study Panels  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for Plutonium CleanupProposal Study Panels

47

Proposal Study Panels  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for Plutonium CleanupProposal Study PanelsProposal

48

Proposal Study Panels  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16HamadaBaO/Al2O3 leanProposal Study Panels Print Two

49

Proposal Study Panels  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16HamadaBaO/Al2O3 leanProposal Study Panels Print

50

Proposal Study Panels  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16HamadaBaO/Al2O3 leanProposal Study Panels

51

Thermal insulations using vacuum panels  

DOE Patents [OSTI]

Thermal insulation vacuum panels are formed of an inner core of compressed low thermal conductivity powders enclosed by a ceramic/glass envelope evaluated to a low pressure.

Glicksman, Leon R. (Lynnfield, MA); Burke, Melissa S. (Pittsburgh, PA)

1991-07-16T23:59:59.000Z

52

The U.S. Department of Energy's Brookhaven National Laboratory P.O. Box 5000, Upton NY 11973 631 344-2345 www.bnl.gov Homeland Security  

E-Print Network [OSTI]

Security pilot program "Securing The Cities," assisting law enforcement in the tri-state area in deployingThe U.S. Department of Energy's Brookhaven National Laboratory · P.O. Box 5000, Upton NY 11973 At Brookhaven National Laboratory New York City (NYC) has been, and continues to be, a major target of terrorism

53

Internship Philips Research North America, Briarcliff Manor, NY Philips Research North America (PRNA) is one of Philips' six worldwide research laboratories where  

E-Print Network [OSTI]

Internship ­ Philips Research North America, Briarcliff Manor, NY Philips Research North America an hour north of New York City. Length of Internship: 3 months Position Responsibilities: · Hands-on work to our area at the start and end of the internship. · If housing is necessary, PRNA supports home

Adams, Mark

54

Internship Philips Research North America, Briarcliff Manor, NY Philips Research North America (PRNA) is one of Philips' six worldwide research laboratories where  

E-Print Network [OSTI]

Internship ­ Philips Research North America, Briarcliff Manor, NY Philips Research North America an hour north of New York City. Length of Internship: 3 months Position Responsibilities: · Gain knowledge expenses to our area at the start and end of the internship. · If housing is necessary, PRNA supports home

Adams, Mark

55

Interoperability of Demand Response Resources Demonstration in NY  

SciTech Connect (OSTI)

The Interoperability of Demand Response Resources Demonstration in NY (Interoperability Project) was awarded to Con Edison in 2009. The objective of the project was to develop and demonstrate methodologies to enhance the ability of customer sited Demand Response resources to integrate more effectively with electric delivery companies and regional transmission organizations.

Wellington, Andre

2014-03-31T23:59:59.000Z

56

Bexar County Parking Garage Photovoltaic Panels  

SciTech Connect (OSTI)

The main objective of the Bexar County Parking Garage Photovoltaic (PV) Panel project is to install a PV System that will promote the use of renewable energy. This project will also help sustain Bexar County ongoing greenhouse gas emissions reduction and energy efficiency goals. The scope of this project includes the installation of a 100-kW system on the top level of a new 236,285 square feet parking garage. The PV system consists of 420 solar panels that covers 7,200 square feet and is tied into the electric-grid. It provides electricity to the office area located within the garage. The estimated annual electricity production of the PV system is 147,000 kWh per year.

Golda Weir

2012-01-23T23:59:59.000Z

57

Plane and parabolic solar panels  

E-Print Network [OSTI]

We present a plane and parabolic collector that absorbs radiant energy and transforms it in heat. Therefore we have a panel to heat water. We study how to increment this capture of solar beams onto the panel in order to increase its efficiency in heating water.

J. H. O. Sales; A. T. Suzuki

2009-05-14T23:59:59.000Z

58

Plane and parabolic solar panels  

E-Print Network [OSTI]

We present a plane and parabolic collector that absorbs radiant energy and transforms it in heat. Therefore we have a panel to heat water. We study how to increment this capture of solar beams onto the panel in order to increase its efficiency in heating water.

Sales, J H O

2009-01-01T23:59:59.000Z

59

Panelized wall system with foam core insulation  

DOE Patents [OSTI]

A wall system includes a plurality of wall members, the wall members having a first metal panel, a second metal panel, and an insulating core between the first panel and the second panel. At least one of the first panel and the second panel include ridge portions. The insulating core can be a foam, such as a polyurethane foam. The foam can include at least one opacifier to improve the k-factor of the foam.

Kosny, Jan (Oak Ridge, TN); Gaskin, Sally (Houston, TX)

2009-10-20T23:59:59.000Z

60

Solar Decathlon Technology Spotlight: Structural Insulated Panels...  

Broader source: Energy.gov (indexed) [DOE]

Decathlon Technology Spotlight: Structural Insulated Panels Solar Decathlon Technology Spotlight: Structural Insulated Panels September 20, 2011 - 7:13am Addthis These structural...

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Fact #775: April 15, 2013 Top Ten Urban Areas for Fuel Wasted...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Information &127;Top Ten Urban Areas for Fuel Wasted due to Traffic Congestion, 2011 Rank Urban Area Fuel Wasted due to Congestion (Million Gallons) 1 New York-Newark NY-NJ-CT...

62

Exascale Workshop Panel Report Meeting  

SciTech Connect (OSTI)

The Exascale Review Panel consists of 12 scientists and engineers with experience in various aspects of high-performance computing and its application, development, and management. The Panel hear presentations by several representatives of the workshops and town meetings convened over the past few years to examine the need for exascale computation capability and the justification for a U.S. Department of Energy (DOE) program to develop such capability. This report summarizes information provided by the presenters and substantial written reports to the Panel in advance of the meeting in Washington D.C. on January 19-20, 2010. The report also summarizes the Panel's conclusions with regard to the justification of a DOE-led exascale initiative.

Khaleel, Mohammad A.

2010-07-01T23:59:59.000Z

63

Blue Ribbon Panel Recommendations Report  

Broader source: Energy.gov [DOE]

The Department of Energy's Geothermal Technologies Office (formerly Geothermal Technologies Program) assembled a geothermal Blue Ribbon Panel on March 22-23, 2011 in Albuquerque, New Mexico for a...

64

One Panel One Roof, DOE Powering Solar Workforce | Department...  

Broader source: Energy.gov (indexed) [DOE]

One Panel One Roof, DOE Powering Solar Workforce One Panel One Roof, DOE Powering Solar Workforce...

65

Dept. of Applied Physics and Applied Math, Columbia University. NY, NY 10027. 212-854-4496 Web-site: http://depts.washington.edu/ufa/home.html  

E-Print Network [OSTI]

, recruit, and retain the best and the brightest students , scientists, and engineers..." is essential of physical sciences research budgets, are critical for maintaining America's long-term competitivenessDept. of Applied Physics and Applied Math, Columbia University. NY, NY 10027. 212-854-4496 Web

66

Analysis of 3-panel and 4-panel microscale ionization sources  

SciTech Connect (OSTI)

Two designs of a microscale electron ionization (EI) source are analyzed herein: a 3-panel design and a 4-panel design. Devices were fabricated using microelectromechanical systems technology. Field emission from carbon nanotube provided the electrons for the EI source. Ion currents were measured for helium, nitrogen, and xenon at pressures ranging from 10{sup -4} to 0.1 Torr. A comparison of the performance of both designs is presented. The 4-panel microion source showed a 10x improvement in performance compared to the 3-panel device. An analysis of the various factors affecting the performance of the microion sources is also presented. SIMION, an electron and ion optics software, was coupled with experimental measurements to analyze the ion current results. The electron current contributing to ionization and the ion collection efficiency are believed to be the primary factors responsible for the higher efficiency of the 4-panel microion source. Other improvements in device design that could lead to higher ion source efficiency in the future are also discussed. These microscale ion sources are expected to find application as stand alone ion sources as well as in miniature mass spectrometers.

Natarajan, Srividya; Parker, Charles B.; Glass, Jeffrey T. [Department of Electrical and Computer Engineering, Duke University, Durham, North Carolina 27708 (United States); Piascik, Jeffrey R.; Gilchrist, Kristin H. [Center for Materials and Electronic Technologies, RTI International, Research Triangle Park, North Carolina 27709 (United States); Stoner, Brian R. [Department of Electrical and Computer Engineering, Duke University, Durham, North Carolina 27708 (United States); Center for Materials and Electronic Technologies, RTI International, Research Triangle Park, North Carolina 27709 (United States)

2010-06-15T23:59:59.000Z

67

Astronomy Advisory Panel Richard Bower, Michael Brown, Anthony  

E-Print Network [OSTI]

Astronomy Advisory Panel Richard Bower, Michael Brown, Anthony Challinor, Chris Evans, Paul O to provide large contracts for UK industry. · High Performance Computing access ­ fund hardware upgrades via over 10 years Many UK science areas: dark energy/matter, galactic structure, transients, solar system

Crowther, Paul

68

BuildSmart NY Innovators Summit Offers Sneak Peek at Better Buildings...  

Broader source: Energy.gov (indexed) [DOE]

prisons, mental health hospitals, office buildings, and facilities that house its trains, buses, and equipment. The New York Power Authority's BuildSmart NY program is...

69

Plasma Panel Based Radiation Detectors  

SciTech Connect (OSTI)

The plasma panel sensor (PPS) is a gaseous micropattern radiation detector under current development. It has many operational and fabrication principles common to plasma display panels (PDPs). It comprises a dense matrix of small, gas plasma discharge cells within a hermetically sealed panel. As in PDPs, it uses non-reactive, intrinsically radiation-hard materials such as glass substrates, refractory metal electrodes, and mostly inert gas mixtures. We are developing these devices primarily as thin, low-mass detectors with gas gaps from a few hundred microns to a few millimeters. The PPS is a high gain, inherently digital device with the potential for fast response times, fine position resolution (< 50 m RMS) and low cost. In this paper we report here on prototype PPS experimental results in detecting betas, protons and cosmic muons, and we extrapolate on the PPS potential for applications including detection of alphas, heavy-ions at low to medium energy, thermal neutrons and X-rays.

Friedman, Dr. Peter S. [Integrated Sensors, LLC; Varner Jr, Robert L [ORNL; Ball, Robert [University of Michigan; Beene, James R [ORNL; Ben Moshe, M. [Tel Aviv University; Benhammou, Yan [Tel Aviv University; Chapman, J. Wehrley [University of Michigan; Etzion, E [Tel Aviv University; Ferretti, Claudio [University of Michigan; Bentefour, E [Ion Beam Applications; Levin, Daniel S. [University of Michigan; Moshe, M. [Tel Aviv University; Silver, Yiftah [Tel Aviv University; Weaverdyck, Curtis [University of Michigan; Zhou, Bing [University of Michigan

2013-01-01T23:59:59.000Z

70

DOE - Office of Legacy Management -- Electromet Corporation - NY 04  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are here Home »HillNY 28DorrE BElectromet

71

DOE - Office of Legacy Management -- Ledoux and Co - NY 37  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are here HomeGunnison- NY

72

DOE - Office of Legacy Management -- National Carbon Co - NY 48  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are herePA 3003A AEC OreOhioCarbon Co - NY

73

DOE - Office of Legacy Management -- Sylvania Corning Plant - NY 19  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou areDowntown Site - MO 02Sutton Steele andPlant - NY

74

DOE - Office of Legacy Management -- Niagara Falls Vicinity Properties NY -  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou areDowntown SiteOhioMissouriMaywoodNY 17 Niagara

75

Property:EIA/861/IsoNy | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformationInyoCoolingTowerWaterUseSummerConsumed JumpMover JumpActivityTransmissionIsoCaIsoNy

76

Peg supported thermal insulation panel  

DOE Patents [OSTI]

A thermal insulation panel which is lightweight, load bearing, accommodates thermal stress, and has excellent high temperature insulation capability comprising high performance insulation between thin metal walls supported by high density, high strength glass pegs made in compliance with specified conditions of time, temperature and pressure.

Nowobilski, Jeffert J. (Orchard Park, NY); Owens, William J. (Kenmore, NY)

1985-01-01T23:59:59.000Z

77

Peg supported thermal insulation panel  

DOE Patents [OSTI]

A thermal insulation panel which is lightweight, load bearing, accommodates thermal stress, and has excellent high temperature insulation capability comprises high performance insulation between thin metal walls supported by high density, high strength glass pegs made in compliance with specified conditions of time, temperature and pressure. 2 figs.

Nowobilski, J.J.; Owens, W.J.

1985-04-30T23:59:59.000Z

78

Fusion Energy Advisory Committee (FEAC): Panel 7 report on Inertial Fusion Energy  

SciTech Connect (OSTI)

The charge to FEAC Panel 7 on inertial fusion energy (IFE) is encompassed in the four articles of correspondence. To briefly summarize, the scope of the panel`s review and analysis adhered to the following guidelines. (1) Consistent with previous recommendations by the Fusion Policy Advisory Committee (FPAC) and the National Academy of Science (NAS) panel on inertial fusion, the principal focus of FEAC Panel 7`s review and planning activities for next-generation experimental facilities in IFE was limited to heavy ions. (2) The panel considered the three budget cases: $5M, $10M, and $15M annual funding at constant level-of-effort (FY92 dollars), with a time horizon of about five years. (3) While limiting the analysis of next-generation experimental facilities to heavy ions, the panel assessed both the induction and rf linac approaches, and factored European plans into its considerations as well. (4) Finally, the panel identified high-priority areas in system studies and supporting IFE technologies, taking into account how IFE can benefit from related activities funded by the Office of Fusion Energy and by Defense Programs. This report presents the technical assessment, findings, and recommendations on inertial fusion energy prepared by FEAC Panel 7.

Davidson, R.; Ripin, B.; Abdou, M.; Baldwin, D.E.; Commisso, R.; Dean, S.O.; Herrmannsfeldt, W.; Lee, E.; Lindl, J.; McCrory, R. [Princeton Univ., NJ (United States)] [and others

1994-09-01T23:59:59.000Z

79

Solar panels as cosmic-ray detectors  

E-Print Network [OSTI]

Due to fundamental limitations of accelerators, only cosmic rays can give access to centre-of- mass energies more than one order of magnitude above those reached at the LHC. In fact, extreme energy cosmic rays (1018 eV - 1020 eV) are the only possibility to explore the 100 TeV energy scale in the years to come. This leap by one order of magnitude gives a unique way to open new horizons: new families of particles, new physics scales, in-depth investigations of the Lorentz symmetries. However, the flux of cosmic rays decreases rapidly, being less than one particle per square kilometer per year above 1019 eV: one needs to sample large surfaces. A way to develop large-effective area, low cost, detectors, is to build a solar panel-based device which can be used in parallel for power generation and Cherenkov light detection. Using solar panels for Cherenkov light detection would combine power generation and a non-standard detection device.

Stella, Carlo; Assis, Pedro; Brogueira, Pedro; Santo, Catarina Espirito; Goncalves, Patricia; Pimenta, Mario; De Angelis, Alessandro

2014-01-01T23:59:59.000Z

80

Compact x-ray source and panel  

DOE Patents [OSTI]

A compact, self-contained x-ray source, and a compact x-ray source panel having a plurality of such x-ray sources arranged in a preferably broad-area pixelized array. Each x-ray source includes an electron source for producing an electron beam, an x-ray conversion target, and a multilayer insulator separating the electron source and the x-ray conversion target from each other. The multi-layer insulator preferably has a cylindrical configuration with a plurality of alternating insulator and conductor layers surrounding an acceleration channel leading from the electron source to the x-ray conversion target. A power source is connected to each x-ray source of the array to produce an accelerating gradient between the electron source and x-ray conversion target in any one or more of the x-ray sources independent of other x-ray sources in the array, so as to accelerate an electron beam towards the x-ray conversion target. The multilayer insulator enables relatively short separation distances between the electron source and the x-ray conversion target so that a thin panel is possible for compactness. This is due to the ability of the plurality of alternating insulator and conductor layers of the multilayer insulators to resist surface flashover when sufficiently high acceleration energies necessary for x-ray generation are supplied by the power source to the x-ray sources.

Sampayon, Stephen E. (Manteca, CA)

2008-02-12T23:59:59.000Z

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Geothermal Technologies Program Blue Ribbon Panel Recommendations  

Broader source: Energy.gov [DOE]

This report describes the recommendations of the Geothermal Blue Ribbon Panel, a panel of geothermal experts assembled in March 2011 for a discussion on the future of geothermal energy in the U.S.

82

Total System Performance Assessment Peer Review Panel  

Broader source: Energy.gov [DOE]

Total System Performance Assessment (TSPA) Peer Review Panel for predicting the performance of a repository at Yucca Mountain.

83

Inside the White House: Solar Panels  

Broader source: Energy.gov [DOE]

Go inside the White House and learn about the installation of solar panels on the roof of the residence.

84

Demonstration of membrane aeration panels: City of Geneva Wastewater Treatment Plant. Final report  

SciTech Connect (OSTI)

This report describes the design, construction, and testing of membrane aeration panels at the Marsh Creek wastewater treatment plant (WWTP) in Geneva, NY. The operators at the Geneva plant have undertaken a long-term program to upgrade wastewater treatment processes and lower operating costs. The aging mechanical surface aerators at the Marsh Creek treatment plant were replaced by a state-of-the-art membrane panel system. This fine-bubble diffused air system offers higher oxygen transfer efficiency than surface aerators or other types of fine-bubble diffused-air systems. The project had four objectives: to decrease the amount of electricity used at the plant for aeration; to enable the plant`s existing aeration basins to accommodate higher organic loads and/or nitrify the wastewater should the need arise; to provide an even distribution of dissolved oxygen within the aeration basins to enhance biological wastewater treatment activity; and to provide technical data to assess the performance of the membrane panel system versus other forms of wastewater aeration.

NONE

1995-01-01T23:59:59.000Z

85

Panel 1 - comparative evaluation of deposition technologies  

SciTech Connect (OSTI)

This working group attempted to evaluate/compare the different types of deposition techniques currently under investigation for depositing diamond and diamond-like carbon films. A table lists the broad types of techniques that were considered for depositing diamond and diamond-like carbon films. After some discussion, it was agreed that any evaluation of the various techniques would be dependent on the end application. Thus the next action was to list the different areas where diamond and DLC films could find applications in transportation. These application areas are listed in a table. The table intentionally does not go into great detail on applications because that subject is dealt with specifically by Panel No. 4 - Applications To Transportation. The next action concentrated on identifying critical issues or limitations that need to be considered in evaluating the different processes. An attempt was then made to rank different broad categories of deposition techniques currently available or under development based on the four application areas and the limitations. These rankings/evaluations are given for diamond and DLC techniques. Finally, the working group tried to identify critical development and research issues that need to be incorporated into developing a long-term program that focuses on diamond/DLC coatings for transportation needs. 5 tabs.

Fenske, G.R.; Stodolsky, F. [Argonne National Lab., IL (United States); Benson, D.K.; Pitts, R.J. [National Renewable Energy Lab., Golden, CO (United States); Bhat, D.G. [GTE Valenite Corp., Troy, MI (United States); Yulin Chen [Allison Gas Turbine Division, GM, Indianapolis, IN (United States); Gat, R.; Sunkara, M.K. [Case Western Reserve Univ., Cleveland, OH (United States); Kelly, M. [Stanford Univ., CA (United States); Lawler, J.E. [Univ. of Wisconsin, Madison (United States); Nagle, D.C. [Martin Marietta Labs., Baltimore, MD (United States); Outka, D. [Sandia National Laboratories, Livermore, CA (United States); Revankar, G.S. [Deere & Co., Moline, IL (United States); Subramaniam, V.V. [Ohio State Univ., Columbus (United States); Wilbur, P.J. [Colorado State Univ., Fort Collins (United States); Mingshow Wong [Northwestern Univ., Evanston, IL (United States); Woolam, W.E. [Southwest Research Inst., Arlington, VA (United States)

1993-01-01T23:59:59.000Z

86

Silica powders for powder evacuated thermal insulating panel and method  

DOE Patents [OSTI]

A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm{sup 3} and an external surface area in the range of about 90 to 600 m{sup 2}/g is described. The silica powders are prepared by reacting a tetraalkyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders. 2 figs.

Harris, M.T.; Basaran, O.A.; Kollie, T.G.; Weaver, F.J.

1996-01-02T23:59:59.000Z

87

Silica powders for powder evacuated thermal insulating panel and method  

DOE Patents [OSTI]

A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2/ g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

Harris, Michael T. (Knoxville, TN); Basaran, Osman A. (Oak Ridge, TN); Kollie, Thomas G. (Oak Ridge, TN); Weaver, Fred J. (Knoxville, TN)

1996-01-01T23:59:59.000Z

88

Silica powders for powder evacuated thermal insulating panel and method  

DOE Patents [OSTI]

A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2 /g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

Harris, Michael T. (Knoxville, TN); Basaran, Osman A. (Oak Ridge, TN); Kollie, Thomas G. (Oak Ridge, TN); Weaver, Fred J. (Knoxville, TN)

1994-01-01T23:59:59.000Z

89

Silica powders for powder evacuated thermal insulating panel and method  

DOE Patents [OSTI]

A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2/ g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

Harris, Michael T. (Knoxville, TN); Basaran, Osman A. (Oak Ridge, TN); Kollie, Thomas G. (Oak Ridge, TN); Weaver, Fred J. (Knoxville, TN)

1995-01-01T23:59:59.000Z

90

Independent Panel Evaluation of Dry Sludge PISA Program  

SciTech Connect (OSTI)

Dr. Kirk Yeager and Mr. Marvin Banks from Energetic Material Research and Technology Center (EMRTC) evaluated the Savannah River Site (SRS) efforts in the Dry Sludge program. They evaluated four program areas: energetic material formation, stability, initiation, and propagation. The panel evaluation included a site visit (July 13, 1999 and July 14, 1999) as well as a review of various reports and presentations by researchers involved in the program.

Fondeur, F.F.

1999-10-20T23:59:59.000Z

91

WIPP_Panel_7_Approved  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500IIVasudhaSurface.Laboratory30, 2014WIPP's Scott MaxwellPanel 7

92

Intergovernmental Panel on Climate Change  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfrared Land SurfaceVirus-InfectedIntelligentCO2theIntergovernmental Panel on

93

Improved design procedure for embedded plates in gravity anchors for precast concrete panels  

E-Print Network [OSTI]

is considered, and second, the shear area of the concrete resisting the applied shear to the studs is considered. Typically, the latter parameter controls the design, since most plate and stud anchorages are installed fairly close to the edge of a wall panel...IMPROVED DESIGN PROCEDURE FOR EMBEDDED PLATES IN GRAVITy ANCHORS FOR PRECAST CONCRETE PANELS A Thesis by Lawrence Fred Fragomeli Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirements...

Fragomeli, Lawrence Fred

2012-06-07T23:59:59.000Z

94

High-efficiency large-area CdTe panels  

SciTech Connect (OSTI)

The objective of this three year effort has been to develop an improved materials technology and fabrication process for limited volume production of 1 ft{sup 2} and 4 ft{sup 2} CdS/CdTe photovoltaic modules. The module stability objective by the end of this three year subcontract was to develop techniques to provide ten year life exploration with no greater than 10% degradation. In order to achieve these efficiency and stability objectives, the research program has been separated into tasks including: (1) analysis and characterization of CdS/CdTe Devices; (2) performance optimization on small cells; (3) encapsulation and stability testing; and (4) module efficiency optimization. 27 refs., 18 figs., 3 tabs.

Albright, S.P.; Chamberlin, R.R.; Jordan, J.F. (Photon Energy, Inc., El Paso, TX (USA))

1990-11-01T23:59:59.000Z

95

SHAHNOZA BOBOEVA Columbia University, The Fu Foundation School of Engineering and Applied Science New York, NY  

E-Print Network [OSTI]

SHAHNOZA BOBOEVA EDUCATION Columbia University, The Fu Foundation School of Engineering and Applied, Economic Theory PROJECT EXPERIENCE Columbia University Master's Thesis New York, NY Potential of Air Branch of Technological University of Tajikistan Khujand, Tajikistan Faculty "Agrotechnology" 2004

96

Integrated Solar Panel Antennas for Cube Satellites.  

E-Print Network [OSTI]

??This thesis work presents an innovative solution for small satellite antennas by integrating slot antennas and solar cells on the same panel to save small… (more)

Mahmoud, Mahmoud N.

2010-01-01T23:59:59.000Z

97

E-Print Network 3.0 - area ny hovedflyplass Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Weigang - Department of Biological Sciences, Hunter College, City University of New York Collection: Biotechnology ; Biology and Medicine 59 Trace Elemental Composition and...

98

STFC Astronomy Advisory Panel Report (October 2012) STFC Astronomy Advisory Panel report (October 2012) 1  

E-Print Network [OSTI]

#12;STFC Astronomy Advisory Panel Report (October 2012) STFC Astronomy Advisory Panel report (October 2012) 1 STFC Astronomy Advisory Panel 2012 Programmatic Review report to PPAN (October 2012) Executive summary This document provides a roadmap for UK astronomy and provides advice for future science

Crowther, Paul

99

Nuisance parameters, composite likelihoods and a panel of GARCH models  

E-Print Network [OSTI]

Nuisance parameters, composite likelihoods and a panel of GARCH models Cavit Pakel Department ) GARCH panels. The defining feature of a GARCH panel with time-series length T is that, while nuisance on the application of the composite likelihood (CL) method to GARCH panels. A GARCH panel is a collection

Wolfe, Patrick J.

100

Panel Session Notes Session II: Energy  

E-Print Network [OSTI]

with resources such as biofuels, wind and solar, however, there are problems on how to integrate these ideas due to make cars more efficient, to make solar panels store more energy to be dispersed throughout the nightPanel Session Notes Session II: Energy Moderator: Dr. Jennifer Curtis Panelists: Dr. Gary Peter

Jawitz, James W.

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Gas pump with movable gas pumping panels  

DOE Patents [OSTI]

Apparatus for pumping gas continuously a plurality of articulated panels of getter material, each of which absorbs gases on one side while another of its sides is simultaneously reactivated in a zone isolated by the panels themselves from a working space being pumped.

Osher, John E. (Alamo, CA)

1984-01-01T23:59:59.000Z

102

Kingspan Insulated Panels: Order (2013-CE-5353)  

Broader source: Energy.gov [DOE]

DOE ordered Kingspan Insulated Panels, Inc. to pay a $8,000 civil penalty after finding Kingspan Insulated Panels had failed to certify that any basic models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

103

AQUEOUS HOMOGENEOUS REACTORTECHNICAL PANEL REPORT  

SciTech Connect (OSTI)

Considerable interest has been expressed for developing a stable U.S. production capacity for medical isotopes and particularly for molybdenum- 99 (99Mo). This is motivated by recent re-ductions in production and supply worldwide. Consistent with U.S. nonproliferation objectives, any new production capability should not use highly enriched uranium fuel or targets. Conse-quently, Aqueous Homogeneous Reactors (AHRs) are under consideration for potential 99Mo production using low-enriched uranium. Although the Nuclear Regulatory Commission (NRC) has guidance to facilitate the licensing process for non-power reactors, that guidance is focused on reactors with fixed, solid fuel and hence, not applicable to an AHR. A panel was convened to study the technical issues associated with normal operation and potential transients and accidents of an AHR that might be designed for isotope production. The panel has produced the requisite AHR licensing guidance for three chapters that exist now for non-power reactor licensing: Reac-tor Description, Reactor Coolant Systems, and Accident Analysis. The guidance is in two parts for each chapter: 1) standard format and content a licensee would use and 2) the standard review plan the NRC staff would use. This guidance takes into account the unique features of an AHR such as the fuel being in solution; the fission product barriers being the vessel and attached systems; the production and release of radiolytic and fission product gases and their impact on operations and their control by a gas management system; and the movement of fuel into and out of the reactor vessel.

Diamond, D.J.; Bajorek, S.; Bakel, A.; Flanagan, G.; Mubayi, V.; Skarda, R.; Staudenmeier, J.; Taiwo, T.; Tonoike, K.; Tripp, C.; Wei, T.; Yarsky, P.

2010-12-03T23:59:59.000Z

104

Thin film photovoltaic panel and method  

DOE Patents [OSTI]

A thin film photovoltaic panel includes a backcap for protecting the active components of the photovoltaic cells from adverse environmental elements. A spacing between the backcap and a top electrode layer is preferably filled with a desiccant to further reduce water vapor contamination of the environment surrounding the photovoltaic cells. The contamination of the spacing between the backcap and the cells may be further reduced by passing a selected gas through the spacing subsequent to sealing the backcap to the base of the photovoltaic panels, and once purged this spacing may be filled with an inert gas. The techniques of the present invention are preferably applied to thin film photovoltaic panels each formed from a plurality of photovoltaic cells arranged on a vitreous substrate. The stability of photovoltaic conversion efficiency remains relatively high during the life of the photovoltaic panel, and the cost of manufacturing highly efficient panels with such improved stability is significantly reduced.

Ackerman, Bruce (El Paso, TX); Albright, Scot P. (El Paso, TX); Jordan, John F. (El Paso, TX)

1991-06-11T23:59:59.000Z

105

Effects of Various Blowout Panel Configurations on the Structural Response of LANL Building 16-340 to Internal Explosions  

SciTech Connect (OSTI)

The risk of accidental detonation is present whenever any type of high explosives processing activity is performed. These activities are typically carried out indoors to protect processing equipment from the weather and to hide possibly secret processes from view. Often, highly strengthened reinforced concrete buildings are employed to house these activities. These buildings may incorporate several design features, including the use of lightweight frangible blowout panels, to help mitigate blast effects. These panels are used to construct walls that are durable enough to withstand the weather, but are of minimal weight to provide overpressure relief by quickly moving outwards and creating a vent area during an accidental explosion. In this study the behavior of blowout panels under various blast loading conditions was examined. External loadings from explosions occurring in nearby rooms were of primary interest. Several reinforcement systems were designed to help blowout panels resist failure from external blast loads while still allowing them to function as vents when subjected to internal explosions. The reinforcements were studied using two analytical techniques, yield-line analysis and modal analysis, and the hydrocode AUTODYN. A blowout panel reinforcement design was created that could prevent panels from being blown inward by external explosions. This design was found to increase the internal loading of the building by 20%, as compared with nonreinforced panels. Nonreinforced panels were found to increase the structural loads by 80% when compared to an open wall at the panel location.

Jason P. Wilke

2005-09-30T23:59:59.000Z

106

Effects of solar photovoltaic panels on roof heat transfer  

E-Print Network [OSTI]

the underside of the tilted solar panels and the surface of the roof under the solar panel (Fig.  2).  An air temperature of the  solar panel is similar to the roof 

Dominguez, Anthony; Kleissl, Jan; Luvall, Jeffrey C

2011-01-01T23:59:59.000Z

107

Radiant heating tests of several liquid metal heat-pipe sandwich panels  

SciTech Connect (OSTI)

Integral heat pipe sandwich panels, which synergistically combine the thermal efficiency of heat pipes and the structural efficiency of honeycomb sandwich construction, were conceived as a means of alleviating thermal stress problems in the Langley Scramjet Engine. Test panels which utilized two different wickable honeycomb cores, facesheets with screen mesh sintered to the internal surfaces, and a liquid metal working fluid (either sodium or potassium) were tested by radiant heating at various heat load levels. The heat pipe panels reduced maximum temperature differences by 31 percent with sodium working fluid and 45 percent with potassium working fluid. Results indicate that a heat pipe sandwich panel is a potential, simple solution to the engine thermal stress problem. Other interesting applications of the concept include: cold plates for electronic component and circuit card cooling, radiators for large space platforms, low distortion large area structures (e.g., space antennas) and laser mirrors.

Camarda, C.J.; Basiulis, A.

1983-08-01T23:59:59.000Z

108

ADVANCED REFLECTIVE FILMS AND PANELS FOR NEXT GENERATION SOLAR...  

Office of Environmental Management (EM)

ADVANCED REFLECTIVE FILMS AND PANELS FOR NEXT GENERATION SOLAR COLLECTORS ADVANCED REFLECTIVE FILMS AND PANELS FOR NEXT GENERATION SOLAR COLLECTORS This presentation was delivered...

109

Obama Administration Announces Plans to Install New Solar Panels...  

Broader source: Energy.gov (indexed) [DOE]

Plans to Install New Solar Panels on the White House Residence Obama Administration Announces Plans to Install New Solar Panels on the White House Residence October 5, 2010 -...

110

DOE Hydrogen and Fuel Cell Activities Panel Discussion: 2010...  

Broader source: Energy.gov (indexed) [DOE]

DOE Hydrogen and Fuel Cell Activities Panel Discussion: 2010 SAE World Congress DOE Hydrogen and Fuel Cell Activities Panel Discussion: 2010 SAE World Congress Presentation by...

111

Buildings of the Future Research Project Launch and Virtual Panel...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Buildings of the Future Research Project Launch and Virtual Panel Discussion on Building Technology Trends Buildings of the Future Research Project Launch and Virtual Panel...

112

New Ideas for Seeding Your Solar Marketplace Workshop Panel Presentati...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Panel Presentations New Ideas for Seeding Your Solar Marketplace Workshop Panel Presentations Download the speaker presentations from the 2014 SunShot Grand Challenge Summit and...

113

DOE Hydrogen and Fuel Cell Activities Panel Discussion: 2010...  

Energy Savers [EERE]

Activities Panel Discussion: 2010 SAE World Congress DOE Hydrogen and Fuel Cell Activities Panel Discussion: 2010 SAE World Congress Presentation by Sunita Satyapal at the 2010...

114

Built waterfront through edge, connection, and exchange : reclaiming a waterfront for Greenpoint, a project in Brooklyn, N.Y.  

E-Print Network [OSTI]

??Currently the waterfront of Brooklyn N.Y. between the Gowanus Canal of Redhook and the Newton Creek of Greenpoint is predominantly lined with various types of… (more)

Ziesemann, Rodney P. (Rodney Paul), 1967-

1998-01-01T23:59:59.000Z

115

Development of a plasma panel radiation detector  

SciTech Connect (OSTI)

This article reports on the development and experimental results of commercial plasma display panels adapted for their potential use as micropattern gas radiation detectors. The plasma panel sensor (PPS) design and materials include glass substrates, metal electrodes and inert gas mixtures which provide a physically robust, hermetically sealed device. Plasma display panels used as detectors were tested with cosmic ray muons, beta rays and gamma rays, protons, and thermal neutrons. The results demonstrated rise times and time resolution of a few nanoseconds, as well as sub-millimeter spatial resolution compatible with the pixel pitch.

Ball, Robert [University of Michigan; Beene, James R [ORNL; Ben Moshe, M. [Tel Aviv University; Benhammou, Yan [Tel Aviv University; Bensimon, B [Tel Aviv University; Chapman, J. Wehrley [University of Michigan; Etzion, E [Tel Aviv University; Ferretti, Claudio [University of Michigan; Friedman, Dr. Peter S. [Integrated Sensors, LLC; Levin, Daniel S. [University of Michigan; Silver, Yiftah [Tel Aviv University; Weaverdyck, Curtis [University of Michigan; Wetzel, R. [University of Michigan; Zhou, Bing [University of Michigan; Anderson, T [GE Measurement and Control Solutions; McKinny, K [GE Measurement and Control Solutions; Bentefour, E [Ion Beam Applications

2014-01-01T23:59:59.000Z

116

Flat or curved thin optical display panel  

DOE Patents [OSTI]

An optical panel includes a plurality of waveguides stacked together, with each waveguide having a first end and an opposite second end. The first ends collectively define a first face, and the second ends collectively define a second face of the panel. The second face is disposed at an acute face angle relative to the waveguides to provide a panel which is relatively thin compared to the height of the second face. In an exemplary embodiment for use in a projection TV, the first face is substantially smaller in height than the second face and receives a TV image, with the second face defining a screen for viewing the image enlarged. 7 figures.

Veligdan, J.T.

1995-01-10T23:59:59.000Z

117

Development of a plasma panel radiation detector  

E-Print Network [OSTI]

This article reports on the development and experimental results of commercial plasma display panels adapted for their potential use as micropattern gas radiation detectors. The plasma panel sensors (PPS) design an materials include glass substrates, metal electrodes and inert gas mixtures which provide a physically robust, hermetically-sealed device. Plasma display panels used as detectors were tested with cosmic ray muons, beta rays and gamma rays, protons and thermal neutrons. The results demonstrated rise times and time resolution of a few nanoseconds, as well as sub-millimeter spatial resolution compatible with the pixel pitch.

R. Ball; J. R. Beene; M. Ben-Moshe; Y. Benhammou; R. Bensimon; J. W. Chapman; E. Etzion; C. Ferretti; P. S. Friedman; D. S. Levin; Y. Silver; R. L. Varner; C. Weaverdyck; R. Wetzel; B. Zhou; T. Anderson; K. McKinny; E. H. Bentefour

2014-06-14T23:59:59.000Z

118

Toward integrated PV panels and power electronics using printing technologies  

SciTech Connect (OSTI)

In this paper, we review the latest developments in the area of printing technologies with an emphasis on the fabrication of control-embedded photovoltaics (PV) with on-board active and passive devices. We also review the use of power converters and maximum power point tracking (MPPT) circuits with PV panels. Our focus is on the investigation of the simplest implementations of such circuits in view of their integration with solar cells using printing technologies. We see this concept as potentially enabling toward further cost reduction. Besides a discussion as to feasibility, we shall also present some projections and guidelines toward possible integration. (author)

Ababei, Cristinel; Yuvarajan, Subbaraya [Electrical and Computer Engineering Department, North Dakota State University, Fargo, ND 58108 (United States); Schulz, Douglas L. [Center for Nanoscale Science and Engineering, North Dakota State University, Fargo, ND 58102 (United States)

2010-07-15T23:59:59.000Z

119

Flat panel ferroelectric electron emission display system  

DOE Patents [OSTI]

A device which can produce a bright, raster scanned or non-raster scanned image from a flat panel. Unlike many flat panel technologies, this device does not require ambient light or auxiliary illumination for viewing the image. Rather, this device relies on electrons emitted from a ferroelectric emitter impinging on a phosphor. This device takes advantage of a new electron emitter technology which emits electrons with significant kinetic energy and beam current density.

Sampayan, Stephen E. (Manteca, CA); Orvis, William J. (Livermore, CA); Caporaso, George J. (Livermore, CA); Wieskamp, Ted F. (Livermore, CA)

1996-01-01T23:59:59.000Z

120

Neutron shielding panels for reactor pressure vessels  

DOE Patents [OSTI]

In a nuclear reactor neutron panels varying in thickness in the circumferential direction are disposed at spaced circumferential locations around the reactor core so that the greatest radial thickness is at the point of highest fluence with lesser thicknesses at adjacent locations where the fluence level is lower. The neutron panels are disposed between the core barrel and the interior of the reactor vessel to maintain radiation exposure to the vessel within acceptable limits.

Singleton, Norman R. (Murrysville, PA)

2011-11-22T23:59:59.000Z

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Contribution of the Reaction Ny-]Nnk to Antikaon Production in Relativistic Heavy-Ion Collisions  

E-Print Network [OSTI]

energy spectrum can also be understood qualitatively. ' There is another process NY ?+NNK which may also contribute to the production of antikaons in heavy-ion collisions. Since the threshold energies for this process are -455 MeV and -635 MeV for Y...=X and Y=A, respectively, and are larger than those for the process m Y?+KN, which are ?120 MeV and -215 MeV for Y=X and Y=A, respectively, one might intuitively think that the contribution from the reaction NY~NNK is negligible. To ensure...

Ko, Che Ming.

1984-01-01T23:59:59.000Z

122

LJUPKA ARSOVA 30-65 Steinway Street, Astoria, 11103 NY1-305-582-2559ljarsova@caa.columbia.edu  

E-Print Network [OSTI]

, Columbia University New York, NY Research Associate for sustainable waste management Sep. 2008- present DEKONTA d.o.o. Belgrade, Serbia Associate Engineer- waste management and soil bioremediation May 2007- Aug Foundation New York, NY Research assistant for waste management Nov. 2010- Feb. 2011 Earth Engineering Center

123

Ann. N.Y. Acad. Sci. ISSN 0077-8923 ANNALS OF THE NEW YORK ACADEMY OF SCIENCES  

E-Print Network [OSTI]

Ann. N.Y. Acad. Sci. ISSN 0077-8923 ANNALS OF THE NEW YORK ACADEMY OF SCIENCES Issue: Environmental endogenous RT doi: 10.1111/j.1749-6632.2012.06580.x Ann. N.Y. Acad. Sci. 1259 (2012) 1­9 c 2012 New York

Hammock, Bruce D.

124

Ann. N.Y. Acad. Sci. ISSN 0077-8923 ANNALS OF THE NEW YORK ACADEMY OF SCIENCES  

E-Print Network [OSTI]

Ann. N.Y. Acad. Sci. ISSN 0077-8923 ANNALS OF THE NEW YORK ACADEMY OF SCIENCES Issue: Ecological decision making and interactions provides an Ann. N.Y. Acad. Sci. 1185 (2010) 39­53 c 2010 New York Academy

Tesfatsion, Leigh

125

Sediment Decontamination For Navigational And Environmental Restoration In NY/NJ Harbor Case Study: Passaic River, New Jersey  

E-Print Network [OSTI]

Sediment Decontamination For Navigational And Environmental Restoration In NY/NJ Harbor ­ Case, Arlington, VA 22230 Sediments in the NY/NJ Harbor are widely contaminated with toxic organic and inorganic compounds. Decontamination of these sediments is one tool that can be used to cope with the problems posed

Brookhaven National Laboratory

126

Radiological Scoping Survey of the Scotia Depot, Scotia, NY  

SciTech Connect (OSTI)

The objectives of the radiological scoping survey were to collect adequate field data for use in evaluating the radiological condition of Scotia Depot land areas, warehouses, and support buildings.

Bailey, E. N.

2008-02-25T23:59:59.000Z

127

Concrete as a Green Building Material Columbia University, New York, NY 10027, USA  

E-Print Network [OSTI]

that influence resource utilization. Keywords: sustainable development, green buildings, supplementaryConcrete as a Green Building Material C. Meyer Columbia University, New York, NY 10027, USA to make it suitable as a "Green Building" material. Foremost and most successful in this regard is the use

Meyer, Christian

128

Abstract No. jone0514 Elemental Distributions for NY/NJ Harbor Sediments  

E-Print Network [OSTI]

Abstract No. jone0514 Elemental Distributions for NY/NJ Harbor Sediments K. Jones (BNL), H. Feng (Montclair State U.) and A. Lanzirotti (U. of Chicago) Beamline(s): X26A Sediments in the New York/New Jersey Waterways Sediments, is a useful material for use in investigation of the spatial variability. This standard

Brookhaven National Laboratory

129

Abstract No. jone0499 FTIR Measurement of Organic Functional Groups in NY/NJ Harbor Sediments  

E-Print Network [OSTI]

Abstract No. jone0499 FTIR Measurement of Organic Functional Groups in NY/NJ Harbor Sediments H. Jones (BNL) Beamline(s): U2B Sediments in urban rivers and estuaries are usually contaminated contaminated sediments cause to the environment and human health is now widely recognized and has stimulated

Brookhaven National Laboratory

130

THERMAL PROPERTIES AND PROCESSES D Hillel, Columbia University, New York, NY, USA  

E-Print Network [OSTI]

- lengths, is proportional to the fourth power of the absolute temperature Tof the body's surface. This lawTHERMAL PROPERTIES AND PROCESSES D Hillel, Columbia University, New York, NY, USA Ă? 2005, Elsevier, and microbial activity. Soil temperature varies in response to changes in the radiant, thermal, and latent

131

Parentage: MS702-80 x NY88 Developers: Michigan State University and  

E-Print Network [OSTI]

Boulder (MSF373-8) Parentage: MS702-80 x NY88 Developers: Michigan State University Douches at Michigan State University (517-355- 0271 x 194, douchesd@msu.edu). Morphological and the Michigan Agricultural Experiment Station Plant Variety Protection: In application Strengths: Boulder

Douches, David S.

132

Borer problems and their control in dwarf apple trees David Kain, Entomology, NYSAES, Geneva, NY  

E-Print Network [OSTI]

Borer problems and their control in dwarf apple trees David Kain, Entomology, NYSAES, Geneva, NY in western New York, were invading burrknots on dwarf apple trees. About the same time, Dick Straub seemed to be becoming more common in dwarf apple plantings, as well. Based on Deb's alert, we decided

Agnello, Arthur M.

133

Physics of Nuclear Medicine Polytechnic Institute of NYU, Brooklyn, NY 11201  

E-Print Network [OSTI]

to undergo radioactive decay, which gives off energy and results in a more stable nucleus #12;EL5823 NuclearPhysics of Nuclear Medicine Yao Wang Polytechnic Institute of NYU, Brooklyn, NY 11201 Based on J. L are from the textbook. #12;EL5823 Nuclear Physics Yao Wang, Polytechnic U., Brooklyn 2 Lecture Outline

Suel, Torsten

134

DOE Zero Energy Ready Home Case Study: AquaZephyr, Ithaca, NY...  

Broader source: Energy.gov (indexed) [DOE]

in Ithaca, NY, that achieves a HERS 56 without PV or HERS 15 with 4-kW of PV. The two-story, 1,664-ft2 home is one of 17 single-family and 4 duplex homes built as part of an...

135

2005 Data Report: Groundwater Monitoring Program Area 5 Radioactive Waste Management Site  

SciTech Connect (OSTI)

This report is a compilation of the calendar year 2005 groundwater sampling results from the Area 5 Radioactive Waste Management Site. In additon to providing groundwater monitoring results, this report also includes information regarding site hydrogeology, well construction, sample collection, and meteorological data measured at the Area 5 Radioactive Waste Management Site at the Nevada Test Site, Ny County, Nevada.

Bechtel Nevada

2006-02-01T23:59:59.000Z

136

Optical panel system including stackable waveguides  

DOE Patents [OSTI]

An optical panel system including stackable waveguides is provided. The optical panel system displays a projected light image and comprises a plurality of planar optical waveguides in a stacked state. The optical panel system further comprises a support system that aligns and supports the waveguides in the stacked state. In one embodiment, the support system comprises at least one rod, wherein each waveguide contains at least one hole, and wherein each rod is positioned through a corresponding hole in each waveguide. In another embodiment, the support system comprises at least two opposing edge structures having the waveguides positioned therebetween, wherein each opposing edge structure contains a mating surface, wherein opposite edges of each waveguide contain mating surfaces which are complementary to the mating surfaces of the opposing edge structures, and wherein each mating surface of the opposing edge structures engages a corresponding complementary mating surface of the opposite edges of each waveguide.

DeSanto, Leonard (Dunkirk, MD); Veligdan, James T. (Manorville, NY)

2007-11-20T23:59:59.000Z

137

Eternal Sunshine of the Solar Panel  

E-Print Network [OSTI]

The social dynamics of residential solar panel use within a theoretical population are studied using a compartmental model. In this study we consider three solar power options commonly available to consumers: the community block, leasing, and buying. In particular we are interested in studying how social influence affects the dynamics within these compartments. As a result of this research a threshold value is determined, beyond which solar panels persist in the population. In addition, as is standard in this type of study, we perform equilibrium analysis, as well as uncertainty and sensitivity analyses on the threshold value. We also perform uncertainty analysis on the population levels of each compartment. The analysis shows that social influence plays an important role in the adoption of residential solar panels.

Ginithan, Mackenzie; Lefevre, Daniel; Srinivasan, Sowmya; Urena, Barbara; Barley, Kamal; Vega, Jose; Yong, Kamuela E; Flores, Jose

2014-01-01T23:59:59.000Z

138

Optical panel system including stackable waveguides  

DOE Patents [OSTI]

An optical panel system including stackable waveguides is provided. The optical panel system displays a projected light image and comprises a plurality of planar optical waveguides in a stacked state. The optical panel system further comprises a support system that aligns and supports the waveguides in the stacked state. In one embodiment, the support system comprises at least one rod, wherein each waveguide contains at least one hole, and wherein each rod is positioned through a corresponding hole in each waveguide. In another embodiment, the support system comprises at least two opposing edge structures having the waveguides positioned therebetween, wherein each opposing edge structure contains a mating surface, wherein opposite edges of each waveguide contain mating surfaces which are complementary to the mating surfaces of the opposing edge structures, and wherein each mating surface of the opposing edge structures engages a corresponding complementary mating surface of the opposite edges of each waveguide.

DeSanto, Leonard; Veligdan, James T.

2007-03-06T23:59:59.000Z

139

515 Loudon Road Loudonville, NY 12211-1462  

E-Print Network [OSTI]

it on hold and Facilities was unable to fix it. Due to the construction of the new residence hall, the area a meeting that went over the small details of what is going to be included in the new Residence Hall. Ie

140

Bonded Bracket Assmebly for Frameless Solar Panels  

SciTech Connect (OSTI)

In February 2011 the US Department of Energy announced their new Sunshot Initiative. The Sunshot goal is to reduce the total cost of solar energy systems by about 75 percent before the end of the decade. The DOE estimated that a total installed cost of $1 per watt for photovoltaic systems would be equivalent to 6���¢/kilowatt hour (kWh) for energy available from the grid. The DOE also estimated that to meet the $1 per watt goal, PV module costs would need to be reduced to $.50 per watt, balance of systems costs would need to be reduced to $.40 per watt, and power electronic costs would need to reach $.10 per watt. To address the BOS balance of systems cost component of the $1 per watt goal, the DOE announced a funding opportunity called (BOS-X) Extreme Balance of System Hardware Cost Reductions. The DOE identified eight areas within the total BOS costs: 1) installation labor, 2) installation materials, 3) installation overhead and profit, 4) tracker, 5) permitting and commissioning, 6) site preparation, 7) land acquisition, 8) sales tax. The BOS-X funding announcement requested applications in four specific topics: Topic 1: Transformational Building Integrated Photovoltaic (BIPV) Modules Topic 2: Roof and Ground Mount Innovations Topic 3: Transformational Photovoltaic System Designs Topic 4: Development of New Wind Load Codes for PV Systems The application submitted by ARaymond Tinnerman reflected the requirements listed in Topic #2, Roof and Ground Mount Innovations. The goal of topic #2 was to develop technologies that would result in the extreme reduction of material and labor costs associated with applications that require physical connections and attachments to roof and ground mount structures. The topics researched in this project included component cost reduction, labor reduction, weight reduction, wiring innovations, and alternative material utilization. The project objectives included: 1) The development of an innovative quick snap bracket assembly that would be bonded to frameless PV modules for commercial rooftop installations. 2) The development of a composite pultruded rail to replace traditional racking materials. 3) In partnership with a roofing company, pilot the certification of a commercial roof to be solar panel compliant, eliminating the need for structural analysis and government oversight resulting in significantly decreased permitting costs. 4) Reduce the sum of all cost impacts in topic #2 from a baseline total of $2.05/watt to $.34/watt.

Murray, Todd

2013-01-30T23:59:59.000Z

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

ROBOTIC DEVICE FOR CLEANING PHOTOVOLTAIC PANEL ARRAYS  

E-Print Network [OSTI]

-Corresponding Author, ymarkopoulos@greenproject.gr, +30-210-60.90.880 With growing costs of electricity and concern. The main method for harnessing solar power is with arrays made up of photovoltaic (PV) panels. Accumulation, and it is vital to maximize the power generating potential during daily service. The accumulation of dust

Mavroidis, Constantinos

142

Training for Emergencies Panel: Chris Reed  

E-Print Network [OSTI]

Training for Emergencies Panel: Chris Reed Ben Berman Immanuel Barshi It's very important to have pilots sharing ideas with other instructor pilots. IB: In aviation there is a lot of mentor training. Instructor pilots are not trained trainers; they are aviators who are providing training. When things

143

Panel Data Econometric Models: Theory and Application  

E-Print Network [OSTI]

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii 1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. NONPARAMETRIC ESTIMATION OF FIXED EFFECTS PANEL DATA MODELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Introduction....5 Conclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3. IS HONG KONG DOLLAR OVERVALUED? EVIDENCE FROM HONG KONG?S TRADE PRICES POST FINANCIAL CRISIS . . . . . . . . . . 14 3.1 Introduction...

Gao, Yichen

2013-05-20T23:59:59.000Z

144

Northern Westchester Energy Action Consortium (NY) | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Powerstories onFocus AreaDataBusPFAN) |Agny Jump to:InformationPUD Jump

145

Effects of Various Blowout Panel Configurations on the Structural Response of Los Alamos National Laboratory Building 16-340 to Internal Explosions  

SciTech Connect (OSTI)

The risk of accidental detonation is present whenever any type of high explosives processing activity is performed. These activities are typically carried out indoors to protect processing equipment from the weather and to hide possibly secret processes from view. Often, highly strengthened reinforced concrete buildings are employed to house these activities. These buildings may incorporate several design features, including the use of lightweight frangible blowout panels, to help mitigate blast effects. These panels are used to construct walls that are durable enough to withstand the weather, but are of minimal weight to provide overpressure relief by quickly moving outwards and creating a vent area during an accidental explosion. In this study the behavior of blowout panels under various blast loading conditions was examined. External loadings from explosions occurring in nearby rooms were of primary interest. Several reinforcement systems were designed to help blowout panels resist failure from external blast loads while still allowing them to function as vents when subjected to internal explosions. The reinforcements were studied using two analytical techniques, yield-line analysis and modal analysis, and the hydrocode AUTODYN. A blowout panel reinforcement design was created that could prevent panels from being blown inward by external explosions. This design was found to increase the internal loading of the building by 20%, as compared with nonreinforced panels. Nonreinforced panels were found to increase the structural loads by 80% when compared to an open wall at the panel location.

Jason P. Wilke

2005-09-30T23:59:59.000Z

146

Arizona: Solar Panels Replace Inefficient Fossil Fuel-Powered...  

Energy Savers [EERE]

Arizona: Solar Panels Replace Inefficient Fossil Fuel-Powered Energy Systems Arizona: Solar Panels Replace Inefficient Fossil Fuel-Powered Energy Systems May 1, 2014 - 9:33am...

147

Mechanical behavior of dip-brazed aluminum sandwich panels  

E-Print Network [OSTI]

An experimental study was carried out to determine the mechanical behavior of sandwich panels containing cellular cores of varying shape. Compression and four point bend tests were performed on sandwich panels with square ...

Hohmann, Brian P. (Brian Patrick)

2007-01-01T23:59:59.000Z

148

Affirmatively furthering fair housing : overcoming barriers to implementation of the Westchester County, NY false claims case settlement  

E-Print Network [OSTI]

Westchester County, NY was sued by the Anti-Discrimination Center of Metro New York, Inc. (ADC) under the False Claims Act for allegedly failing to meet its Affirmatively Further Fair Housing obligation for Community ...

Stein, Julie Iris

2010-01-01T23:59:59.000Z

149

Built waterfront through edge, connection, and exchange : reclaiming a waterfront for Greenpoint, a project in Brooklyn, N.Y.  

E-Print Network [OSTI]

Currently the waterfront of Brooklyn N.Y. between the Gowanus Canal of Redhook and the Newton Creek of Greenpoint is predominantly lined with various types of industrial and manufacturing uses. Scattered throughout are ...

Ziesemann, Rodney P. (Rodney Paul), 1967-

1998-01-01T23:59:59.000Z

150

EXPERIMENTAL TESTING OF TWO SOLAR PANEL SIMULATIONS Krisztina Leban  

E-Print Network [OSTI]

EXPERIMENTAL TESTING OF TWO SOLAR PANEL SIMULATIONS Krisztina Leban Institute of Energy Technology solar panel for varying temperature and irradiance. Final validation was done by comparing experimental are a renewable, non-polluting source of energy that are increasingly used for hybrid (solar panels and grid

Ritchie, Ewen

151

Peer Effects in the Diffusion of Solar Photovoltaic Panels  

E-Print Network [OSTI]

Peer Effects in the Diffusion of Solar Photovoltaic Panels Bryan Bollinger NYU Stern School base of consumers in the reference group. We study the diffusion of solar photovoltaic panels of an environmentally beneficial technology, solar photovoltaic (PV) panels. Policymakers are particularly interested

Lee, Daeyeol

152

NO. REV. MO EASEP SOLAR PANEL OCCULTAT ION  

E-Print Network [OSTI]

., : :. I · ' NO. REV. MO· EATM-59 EASEP SOLAR PANEL OCCULTAT ION PAGE l OF 9 DATE 24 Feb 1969 ()i~ ~ .I /1'1 . ! I Prepared by:~ ~Wallack . 11 ''--'/ ~~~ #12;: : .. EASEP SOLAR PANEL OCCULTATION. EATM-59 PAGE 2 OF 9 DATE 24 Feb I969 #12;NO. RIV. NO. : : .~ EASEP Solar Panel Occultation EATM-59 PAGI

Rathbun, Julie A.

153

Chemical technology news from across RSC Publishing. Printing solar panels  

E-Print Network [OSTI]

Publishing Chemical technology news from across RSC Publishing. Printing solar panels 22 January size) silicon microcells that connect together to form flexible solar panels. By stamping hundreds solar panels 2/8/2010http://www.rsc.org/Publishing/ChemTech/Volume/2010/02/printing_solar.asp #12;Page 2

Rogers, John A.

154

DOE Zero Energy Ready Home Case Study: Greenhill Contracting, New Paltz, NY  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Deliciouscritical_materials_workshop_presentations.pdf MoreProgramofContract atInc., Sagaponack, NY, Custom HomeHomes,|

155

DECONTAMINATION OF DREDGED MATERIAL FROM PORT OF NY/NJ DECONTAMINATION OF DREDGED MATERIAL FROM THE PORT OF  

E-Print Network [OSTI]

District, CENAN-PL-ES, 26 Federal Plaza, New York, NY 10278-0090 4 Department of Environmental and Energy THE PORT OF NEW YORK AND NEW JERSEY 1 K. W. Jones, 2 E. A. Stern, 3 K. R. Donato, 4 N. L. Clesceri 1 - Region 2 - DEPP-PBPB, 290 Broadway, New York, NY 10007-1866 3 US Army Corps of Engineers - New York

Brookhaven National Laboratory

156

Endogenous contagion – a panel data analysis  

E-Print Network [OSTI]

of the figure presents the coefficient estimates, and the second panel presents the t-value associated with each estimate along with the corresponding 99 percent critical values. Inspection of this figure shows evidence of joint contagion across all eleven... countries for equity returns in four clear episodes as measured by their significance at the 99 percent level. When contagion is evident, the parameter estimates of the fixed time effects are generally large in absolute terms, and tend to cluster...

Baur, Dirk; Fry, Renee

2006-01-01T23:59:59.000Z

157

Input to Priorities Panel August 7, 2012  

E-Print Network [OSTI]

Input to Priorities Panel August 7, 2012 Jeff Freidberg MIT 1 #12;The Emperor of Fusion has · Comparison (1 GW overnight cost) · Coal $ 3B · Gas $ 1B · Nuclear $ 4B · Wind $ 2B · Solar-T $ 3B · ITER $25B option · Tough MHD, heating, current drive, transport · I doubt it will achieve its mission · Still

158

Hydrogen Safety Panel | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensional Subject:GroundtoProduction Technical TeamReleasePanel Hydrogen

159

Sequence and annotation of the 369-kb NY-2A and the 345-kb AR158 viruses that infect Chlorella NC64A  

E-Print Network [OSTI]

Sequence and annotation of the 369-kb NY-2A and the 345-kb AR158 viruses that infect Chlorella NC64, unicellular, eukaryotic, chlorella-like green alga, Chlorella NC64A. The 368,683-bp genome of NY-2A and the 344,690-bp genome of AR158 are the two largest chlorella virus genomes sequenced to date; NY-2A

Graves, Michael V.

160

Optimizing Spectral Color Reproduction in Multiprimary Digital David Long, Mark D. Fairchild; Munsell Color Science Laboratory, Rochester Institute of Technology; Rochester, NY  

E-Print Network [OSTI]

. Fairchild; Munsell Color Science Laboratory, Rochester Institute of Technology; Rochester, NY Abstract of constructing an abridged spectral reproduction display environment from P3 digital cinema-based displays

Fairchild, Mark D.

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

DOE - Office of Legacy Management -- Colorado Fuel and Iron - NY 0-08  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are here Home »Hill -ElmorePlantFuel and Iron - NY

162

DOE - Office of Legacy Management -- Crucible Steel Co of America - NY 34  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are here Home »HillNY 28 CornellCrane Co

163

DOE - Office of Legacy Management -- Eastman Kodak Laboratory - NY 0-09  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are here Home »HillNY 28DorrE B Badger -

164

DOE - Office of Legacy Management -- Enterprise Metal Products - NY 0-10  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are here Home »HillNY

165

DOE - Office of Legacy Management -- Ithaca Gun Co Inc - NY 53  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are here HomeGunnison- NY 38 Rare- IA

166

DOE - Office of Legacy Management -- Knolls Atomic Power Laboratory - NY 16  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are here HomeGunnison- NY 38Kerr McGee -

167

DOE - Office of Legacy Management -- Utica Drop Forge and Tool Corp - NY 39  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou areDowntown Site -Miami - FL 0-01NY

168

Method for molding threads in graphite panels  

DOE Patents [OSTI]

A graphite panel (10) with a hole (11) having a damaged thread (12) is repaired by drilling the hole (11) to remove all of the thread and make a new hole (13) of larger diameter. A bolt (14) with a lubricated thread (17) is placed in the new hole (13) and the hole (13) is packed with graphite cement (16) to fill the hole and the thread on the bolt. The graphite cement (16) is cured, and the bolt is unscrewed therefrom to leave a thread (20) in the cement (16) which is at least as strong as that of the original thread (12).

Short, William W. (Livermore, CA); Spencer, Cecil (Silverton, OR)

1994-01-01T23:59:59.000Z

169

Method for molding threads in graphite panels  

DOE Patents [OSTI]

A graphite panel with a hole having a damaged thread is repaired by drilling the hole to remove all of the thread and making a new hole of larger diameter. A bolt with a lubricated thread is placed in the new hole and the hole is packed with graphite cement to fill the hole and the thread on the bolt. The graphite cement is cured, and the bolt is unscrewed therefrom to leave a thread in the cement which is at least as strong as that of the original thread. 8 figures.

Short, W.W.; Spencer, C.

1994-11-29T23:59:59.000Z

170

Panel Discussion | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Powerstories onFocusOski Energy LLC Place:FerrySprings,Panda EnergyPanel

171

Advisory Panels | Stanford Synchrotron Radiation Lightsource  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation InInformationCenterResearch Highlights MediaFuelAbout UsAdvisory Panels SSRL Scientific

172

FESAC Planning Panel Report to UFA: November 12, 2007 FESAC Planning Panel Final Report  

E-Print Network [OSTI]

· Martin Greenwald ­ Chair · Richard Callis · Bill Dorland · David Gates · Jeff Harris · Rulon Linford · Mike Mauel · Kathryn McCarthy Panel · Dale Meade · Farrokh Najmabadi · Bill Nevins · John Sarff · Mike

173

Design and Analysis of Cooling Methods for Solar Panels.  

E-Print Network [OSTI]

??As the future progresses, many companies and industries are striving to achieve a "greener" approach to energy production by using solar energy. Solar panels that… (more)

Palumbo, Adam M

2013-01-01T23:59:59.000Z

174

Canadian Solar Road Panel Design: A Structural and Environmental Analysis.  

E-Print Network [OSTI]

??Solar road panels are a technology that have the ability to revolutionize the way that roads are built and how electricity is generated. Strong incentives… (more)

Northmore, Andrew

2014-01-01T23:59:59.000Z

175

FPGA Implementation of Multilayer Perceptron for Modeling of Photovoltaic panel  

SciTech Connect (OSTI)

The Number of electronic applications using artificial neural network-based solutions has increased considerably in the last few years. However, their applications in photovoltaic systems are very limited. This paper introduces the preliminary result of the modeling and simulation of photovoltaic panel based on neural network and VHDL-language. In fact, an experimental database of meteorological data (irradiation, temperature) and output electrical generation signals of the PV-panel (current and voltage) has been used in this study. The inputs of the ANN-PV-panel are the daily total irradiation and mean average temperature while the outputs are the current and voltage generated from the panel. Firstly, a dataset of 4x364 have been used for training the network. Subsequently, the neural network (MLP) corresponding to PV-panel is simulated using VHDL language based on the saved weights and bias of the network. Simulation results of the trained MLP-PV panel based on Matlab and VHDL are presented. The proposed PV-panel model based ANN and VHDL permit to evaluate the performance PV-panel using only the environmental factors and involves less computational efforts, and it can be used for predicting the output electrical energy from the PV-panel.

Mekki, H.; Belhout, K. [Department of Electronics, RASIC laboratory BLIDA UniversityBLIDA (Algeria); Mellit, A.; Salhi, H. [Department of Electronics, Control laboratory BLIDA UniversityBLIDA (Algeria)

2008-06-12T23:59:59.000Z

176

Experimental investigation of wind effect on solar panels.  

E-Print Network [OSTI]

??Photovoltaic Solar Panels for electricity generation are outdoor low-rise structures that are vulnerable to damage by the wind. The existing building codes do not contain… (more)

Abiola-Ogedengbe, Ayodeji

2013-01-01T23:59:59.000Z

177

"PBS NEWSHOUR" covers new technique that may make solar panel...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Scientists have developed a more efficient method of creating the material that makes solar panels work, according to a report published this week, which researchers say could...

178

Effects of solar photovoltaic panels on roof heat transfer  

E-Print Network [OSTI]

the energy performance of  photovoltaic roofs, ASHRAE Trans A thermal model for photovoltaic systems, Solar Energy, Effects of Solar Photovoltaic Panels on Roof Heat Transfer 

Dominguez, Anthony; Kleissl, Jan; Luvall, Jeffrey C

2011-01-01T23:59:59.000Z

179

City and County of Denver- Solar Panel Permitting (Colorado)  

Broader source: Energy.gov [DOE]

Construction, Electrical, Plumbing and Zoning Permits* are required for Photovoltaic (PV) systems installed in the city of Denver. Denver provides same day permit review for most solar panel...

180

ADVANCED REFLECTIVE FILMS AND PANELS FOR NEXT GENERATION SOLAR...  

Broader source: Energy.gov (indexed) [DOE]

film based panel -formed at high accuracy (<1.5 mrad RMS slope error) Adaptive optics (minimizes canting errors) Space frame based support structure Operation and...

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Study of Alternative Approaches for Transite Panel Removal |...  

Broader source: Energy.gov (indexed) [DOE]

(BJC) assembled an experienced team from both sites to evaluate both the manual and mechanical methods of transite panel removal. Study of Alternative Approaches for Transite...

182

Dual circuit embossed sheet heat transfer panel  

DOE Patents [OSTI]

A heat transfer panel provides redundant cooling for fusion reactors or the like environment requiring low-mass construction. Redundant cooling is provided by two independent cooling circuits, each circuit consisting of a series of channels joined to inlet and outlet headers. The panel comprises a welded joinder of two full-size and two much smaller partial-size sheets. The first full-size sheet is embossed to form first portions of channels for the first and second circuits, as well as a header for the first circuit. The second full-sized sheet is then laid over and welded to the first full-size sheet. The first and second partial-size sheets are then overlaid on separate portions of the second full-sized sheet, and are welded thereto. The first and second partial-sized sheets are embossed to form inlet and outlet headers, which communicate with channels of the second circuit through apertures formed in the second full-sized sheet. 6 figs.

Morgan, G.D.

1984-02-21T23:59:59.000Z

183

Structural, optical and electrical properties of WOxNy filmsdeposited by reactive dual magnetron sputtering  

SciTech Connect (OSTI)

Thin films of tungsten oxynitride were prepared by dual magnetron sputtering of tungsten using argon/oxygen/nitrogen gas mixtures with various nitrogen/oxygen ratios. The presence of even small amounts of oxygen had a great effect not only on the composition but on the structure of WOxNy films, as shown by Rutherford backscattering and x-ray diffraction, respectively. Significant incorporation of nitrogen occurred only when the nitrogen partial pressure exceeded 89 percent of the total reactive gas pressure. Sharp changes in the stoichiometry, deposition rate, room temperature resistivity, electrical activation energy and optical band gap were observed when the nitrogen/oxygen ratio was high.The deposition rate increased from 0.31 to 0.89 nm/s, the room temperature resistivity decreased from 1.65 x 108 to 1.82 x 10-2 ?cm, the electrical activation energy decreased from 0.97 to 0.067 eV, and the optical band gap decreased from 3.19 to 2.94 eV upon nitrogen incorporation into the films. WOxNy films were highly transparent as long as the nitrogen incorporation was low, and were brownish (absorbing) and partially reflecting as nitrogen incorporation became significant.

Mohamed, Sodky H.; Anders, Andre

2006-06-05T23:59:59.000Z

184

WTEC panel report on European nuclear instrumentation and controls. Final report  

SciTech Connect (OSTI)

A study of instrumentation and controls (I and C) technology used in nuclear power plants in Europe was conducted by a panel of US specialists. This study plants in Europe was conducted by a panel of US specialists. This study included a review of the literature on the subject, followed by a visit to some of the leading organizations in Europe in the field nuclear I and C. Areas covered are: (1) role of the operator and control room design; (2) transition from analog to digital technology; (3) computerized operator support systems for fault management; (4) control strategies and techniques; (5) Nuclear power plant I and C architecture; (6) instrumentation and (7) computer standards and tools. The finding relate to poor reactions.

White, J.D.; Lanning, D.D.; Johnson, P.M.H. [eds.] [World Technology Evaluation Center, Baltimore, MD (United States); Shelton, R.D. [World Technology Evaluation Center, Baltimore, MD (United States)

1991-12-01T23:59:59.000Z

185

MACHINE LEARNING IN A DYNAMIC WORLD Panel Dmussion  

E-Print Network [OSTI]

MACHINE LEARNING IN A DYNAMIC WORLD Panel Dmussion Miecsyslaw M. Kohr Panel O&m and Editor. Michal~gi,George Mason University R.S.Sutton, GTE Laboratories Machine Learning was established of machine learning research was in Cybernetic Systems and Adaptive Control. Machine Learning has been

Antsaklis, Panos

186

MEASUREMENT OF MIRROR PANELS USING COLOURED PATTERN DEFLECTOMETRY  

E-Print Network [OSTI]

and parabolic dish solar concentrators. Factory production of mirror panels also requires accurate measurementsMEASUREMENT OF MIRROR PANELS USING COLOURED PATTERN DEFLECTOMETRY Paul M. Scott1 , and Greg Burgess2 1 Research Assistant, Solar Thermal Group, Australian National University (ANU), Building 32 North

187

Security Issues in Data Warehousing and Data Mining: Panel Discussion  

E-Print Network [OSTI]

and mining. Position by Linda Schlipper For most enterprises there is no shortage of data. Operational dataSecurity Issues in Data Warehousing and Data Mining: Panel Discussion Bhavani Thuraisingham Corporation Abstract This paper describes the panel discussion on data warehousing, data mining and security

Lin, Tsau Young

188

Fundamental Neutron Physics Beamline Review Panel Report 31 October 2002  

E-Print Network [OSTI]

Fundamental Neutron Physics Beamline Review Panel Report 31 October 2002 The Fundamental Neutron Physics Beamline Review Panel met at the SNS Headquarters on October 17, 2002. We received presentations and astrophysics calculations such as the solar neutrino flux. Those quantities are also used in efforts

189

Ultrathin optical panel and a method of making an ultrathin optical panel  

DOE Patents [OSTI]

An ultrathin optical panel, and a method of producing an ultrathin optical panel, are disclosed, including stacking a plurality of glass sheets, which sheets may be coated with a transparent cladding substance or may be uncoated, fastening together the plurality of stacked coated glass sheets using an epoxy or ultraviolet adhesive, applying uniform pressure to the stack, curing the stack, sawing the stack to form an inlet face on a side of the stack and an outlet face on an opposed side of the stack, bonding a coupler to the inlet face of the stack, and fastening the stack, having the coupler bonded thereto, within a rectangular housing having an open front which is aligned with the outlet face, the rectangular housing having therein a light generator which is optically aligned with the coupler. The light generator is preferably placed parallel to and proximate with the inlet face, thereby allowing for a reduction in the depth of the housing.

Biscardi, Cyrus (Bellport, NY); Brewster, Calvin (North Patchogue, NY); DeSanto, Leonard (Patchogue, NY); Veligdan, James T. (Manorville, NY)

2003-02-11T23:59:59.000Z

190

Ultrathin Optical Panel And A Method Of Making An Ultrathin Optical Panel.  

DOE Patents [OSTI]

An ultrathin optical panel, and a method of producing an ultrathin optical panel, are disclosed, including stacking a plurality of glass sheets, which sheets may be coated with a transparent cladding substance or may be uncoated, fastening together the plurality of stacked coated glass sheets using an epoxy or ultraviolet adhesive, applying uniform pressure to the stack, curing the stack, sawing the stack to form an inlet face on a side of the stack and an outlet face on an opposed side of the stack, bonding a coupler to the inlet face of the stack, and fastening the stack, having the coupler bonded thereto, within a rectangular housing having an open front which is aligned with the outlet face, the rectangular housing having therein a light generator which is optically aligned with the coupler. The light generator is preferably placed parallel to and proximate with the inlet face, thereby allowing for a reduction in the depth of the housing.

Biscardi, Cyrus (Bellport, NY); Brewster, Calvin (North Patchoque, NY); DeSanto, Leonard (Patchoque, NY); Veligdan, James T. (Manorville, NY)

2005-02-15T23:59:59.000Z

191

Ultrathin optical panel and a method of making an ultrathin optical panel  

DOE Patents [OSTI]

An ultrathin optical panel, and a method of producing an ultrathin optical panel, are disclosed, including stacking a plurality of glass sheets, which sheets may be coated With a transparent cladding substance or may be uncoated, fastening together the plurality of stacked coated glass sheets using an epoxy or ultraviolet adhesive, applying uniform pressure to the stack, curing the stack, sawing the stack to form an inlet face on a side of the stack and an outlet face on an opposed side of the stack, bonding a coupler to the inlet face of the stack, and fastening the stack, having the coupler bonded thereto, within a rectangular housing having an open front which is aligned with the outlet face, the rectangular housing having therein a light generator which is optically aligned with the coupler. The light generator is preferably placed parallel to and proximate with the inlet face, thereby allowing for a reduction in the depth of the housing.

Biscardi, Cyrus (Bellport, NY); Brewster, Calvin (North Patchogue, NY); DeSanto, Leonard (Patchogue, NY); Veligdan, James T. (Manorville, NY)

2002-01-01T23:59:59.000Z

192

Ultrathin optical panel and a method of making an ultrathin optical panel  

DOE Patents [OSTI]

An ultrathin optical panel, and a method of producing an ultrathin optical panel, are disclosed, including stacking a plurality of glass sheets, which sheets may be coated with a transparent cladding substance or may be uncoated, fastening together the plurality of stacked coated glass sheets using an epoxy or ultraviolet adhesive, applying uniform pressure to the stack, curing the stack, sawing the stack to form an inlet face on a side of the stack and an outlet face on an opposed side of the stack, bonding a coupler to the inlet face of the stack, and fastening the stack, having the coupler bonded thereto, within a rectangular housing having an open front which is aligned with the outlet face, the rectangular housing having therein a light generator which is optically aligned with the coupler. The light generator is preferably placed parallel to and proximate with the inlet face, thereby allowing for a reduction in the depth of the housing.

Biscardi, Cyrus (Bellport, NY); Brewster, Calvin (North Patchogue, NY); DeSanto, Leonard (Patchogue, NY); Veligdan, James T. (Manorville, NY)

2001-10-09T23:59:59.000Z

193

Ultrathin Optical Panel And A Method Of Making An Ultrathin Optical Panel.  

DOE Patents [OSTI]

An ultrathin optical panel, and a method of producing an ultrathin optical panel, are disclosed, including stacking a plurality of glass sheets, which sheets may be coated with a transparent cladding substance or may be uncoated, fastening together the plurality of stacked coated glass sheets using an epoxy or ultraviolet adhesive, applying uniform pressure to the stack, curing the stack, sawing the stack to form an inlet face on a side of the stack and an outlet face on an opposed side of the stack, bonding a coupler to the inlet face of the stack, and fastening the stack, having the coupler bonded thereto, within a rectangular housing having an open front which is aligned with the outlet face, the rectangular housing having therein a light generator which is optically aligned with the coupler. The light generator is preferably placed parallel to and proximate with the inlet face, thereby allowing for a reduction in the depth of the housing.

Biscardi, Cyrus (Bellport, NY); Brewster, Calvin (North Patchogue, NY); DeSanto, Leonard (Patchogue, NY); Veligdan, James T. (Manorville, NY)

2005-05-17T23:59:59.000Z

194

Masato R. Nakamura, Eng.Sc.D. 420 Central Park West #1C New York, NY 10025  

E-Print Network [OSTI]

Project · Designed reactors for gasification of solid waste using Computer Aided Design (CAD) software.Sc.D), Earth and Environmental Engineering, May 2008 Stochastic simulation and integrated modeling of waste, NY Research Associate, May 2008 ­ August 2010 Solid Waste Modeling Project · Developed a 2

195

FREE ELECTRON LASERS AND HIGH-ENERGY ELECTRON COOLING* Vladimir N. Litvinenko, BNL, Upton, Long Island, NY, USA#  

E-Print Network [OSTI]

two orders-of-magnitude. Two techniques offering the potential to cool high- energy hadron beamsFREE ELECTRON LASERS AND HIGH-ENERGY ELECTRON COOLING* Vladimir N. Litvinenko, BNL, Upton, Long Island, NY, USA# Yaroslav S. Derbenev, TJNAF, Newport News, VA, USA) Abstract Cooling intense high

196

POLICY FLASH 2014-25 Revision to the Procurement Strategy Panel...  

Energy Savers [EERE]

5 Revision to the Procurement Strategy Panel (PSP) Briefing Process POLICY FLASH 2014-25 Revision to the Procurement Strategy Panel (PSP) Briefing Process For DOE questions...

197

Information tracking and sharing in organic photovoltaic panel manufacturing  

E-Print Network [OSTI]

The MIT MEng team of four worked with Konarka Technologies, a world leading organic solar panel manufacturer, on production tracking and analysis as well as various operational improvement projects. MIT's collaborative ...

Gong, Ming, M. Eng. Massachusetts Institute of Technology

2011-01-01T23:59:59.000Z

198

Panel on Data Usage Management: Technology or Regulation?  

E-Print Network [OSTI]

1 Panel on Data Usage Management: Technology or Regulation? Prof. Ravi Sandhu Executive Director about data usage management Users Enterprises Researchers What can be done Technical Regulatory care about data usage management Users Enterprises Researchers What can be done Technical

Sandhu, Ravi

199

Arkansas Students Get Their Hands Dirty in Solar Panel Project...  

Broader source: Energy.gov (indexed) [DOE]

at-risk youth graduate from high school. "Having been in the military and stationed in Germany, I saw a magazine article about German farmers who install solar panels on the...

200

Dynamic instabilities imparted by CubeSat deployable solar panels  

E-Print Network [OSTI]

In this work, multibody dynamics simulation was used to investigate the effects of solar panel deployment on CubeSat attitude dynamics. Nominal and partial/asymmetric deployments were simulated for four different solar ...

Peters, Eric David

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Independent Scientific Review Panel Retrospective Report 1997 2005  

E-Print Network [OSTI]

Independent Scientific Review Panel Retrospective Report 1997 ­ 2005 ISRP 2005-14 August 31, 2005 graphics used in this report. #12;ISRP Retrospective Report 1997 - 2005 Executive Summary.....................................................................

202

Effects of solar photovoltaic panels on roof heat transfer  

E-Print Network [OSTI]

Itron Inc. , CPUC California Solar Initiative 2009 Impact hot  days found by the California Solar Initiative impact solar photovoltaic (PV) panels were conducted in  San Diego, California.  

Dominguez, Anthony; Kleissl, Jan; Luvall, Jeffrey C

2011-01-01T23:59:59.000Z

203

Kingspan Insulated Panels: Proposed Penalty (2013-CE-5353)  

Broader source: Energy.gov [DOE]

DOE alleged in a Notice of Proposed Civil Penalty that Kingspan Insulated Panels, Inc. failed to certify a variety of walk-in cooler or freezer components as compliant with the applicable energy conservation standards.

204

PANEL: DDI and Metadata from the Researcher's Perspective  

E-Print Network [OSTI]

This was a panel discussion on lifecycle metadata issues from the researcher's perspective. A lot of focus has been placed on how to integrate DDI into large data collection processes in the world of official statistics, ...

Thomas, Wendy; Brown, J. Christopher; Nakao, Ron

2013-04-02T23:59:59.000Z

205

Seismic retrofit of precast panel buildings in Eastern Europe  

E-Print Network [OSTI]

Many countries in Eastern Europe, particularly ones from the former Soviet Bloc, are facing a potential crisis regarding their deteriorating precast panel apartment buildings. These complexes were built using industrial ...

Tzonev, Tzonu

2013-01-01T23:59:59.000Z

206

advisory panel open: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Effective Fabrication of a Solar PV Panel for LED Lighting CiteSeer Summary: Abstract Solar cells are very fragile so they need a encapsulant and encasing for protection and...

207

advisory panel notice: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Effective Fabrication of a Solar PV Panel for LED Lighting CiteSeer Summary: Abstract Solar cells are very fragile so they need a encapsulant and encasing for protection and...

208

ashp expert panel: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Effective Fabrication of a Solar PV Panel for LED Lighting CiteSeer Summary: Abstract Solar cells are very fragile so they need a encapsulant and encasing for protection and...

209

Panel Discussion: Career Paths in Energy & Sustainability: Perspective...  

Broader source: Energy.gov (indexed) [DOE]

a.m.-7 p.m. The events include: 11:30 a.m.-2 p.m. Panel Discussion "Career Paths in Energy & Sustainability: Perspectives from Successful Women Professionals," including Dr....

210

Panel data analysis of U.S. coal productivity  

E-Print Network [OSTI]

We analyze labor productivity in coal mining in the United States using indices of productivity change associated with the concepts of panel data modeling. This approach is valuable when there is extensive heterogeneity ...

Stoker, Thomas M.

2000-01-01T23:59:59.000Z

211

Limited Dependent Variable Correlated Random Coefficient Panel Data Models  

E-Print Network [OSTI]

OF CONTENTS : : : : : : : : : : : : : : : : : : : : : : : : : : : : : vii LIST OF TABLES : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : ix 1. INTRODUCTION : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 1 1.1 Linear Models... : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 2 1.2 Binary Response Models : : : : : : : : : : : : : : : : : : : : : : : : : 3 1.3 Truncated Models : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 6 2. LINEAR CRC PANEL DATA MODELS : : : : : : : : : : : : : : : : : : 8 2.1...

Liang, Zhongwen

2012-10-19T23:59:59.000Z

212

TWRS vadose zone contamination issue expert panel report  

SciTech Connect (OSTI)

When members were first canvassed for participation in the Vadose Zone Expert Panel the stated purpose for convening the Panel was to review a controversial draft report, the SX Tank Farm Report. This report was produced by a DOE Grand Junction Project Office (GJPO) contractor, RUST Geotech, now MACTEC-ERS, for the DOE Richland Office (DOERL). Three meetings were planned for June, July and August, 1995 to review the draft report and to complete a Panel report by mid-September. The Expert Panel has found its efforts confounded by various non-technical issues. The Expert Panel has chosen to address some of the non-technical issues in this Preface rather than to dilute the technical discussion that follows in the body of this independent expert panel status report (Panel Report). Rather than performing a straightforward manuscript review, the Panel was asked to resolve conflicting interpretations of gamma-ray logging measurements performed in vadose zone boreholes (drywells) surrounding the high-level radioactive wastes of the SX tank farm. There are numerous and complex technical issues that must be evaluated before the vertical and radial extent of contaminant migration at the SX tank farm can be accurately assessed. When the Panel first met in early June, 1996, it quickly became apparent that the scientific and technical issues were obscured by policy and institutional affairs which have polarized discussion among various segments of the Hanford organization. This situation reflects the kinds of institutional problems described separately in reports by the National Research Council of the National Academy of Sciences (NAS/NRC), The Hanford Tanks Environmental Impacts and Policy Choices and BmTiers to Science: Technical Management of the Department of Energy Environmental Remediation Program. The Vadose Zone Characterization Program, appears to be caught between conflicting pressures and organizational mandates, some imposed from outside DOE-RL and some self-imposed. The institutional problems they encountered include having both Tank Waste Remediation System (TWRS), the parent organization of the Vadose Zone Characterization Program and Environmental Restoration (ER), each under different regulatory controls and different organizational units, seeking to defend the status quo and discount many of the Panel`s conclusions and recommendations. The results presented in the SX Tank Farm Report, especially the visualizations, have created concern in the public sector, both on a local, personal level and on a national political level.

Shafer, D.S.

1997-05-01T23:59:59.000Z

213

Panel 2 - properties of diamond and diamond-like-carbon films  

SciTech Connect (OSTI)

This panel attempted to identify and prioritize research and development needs in determining the physical, mechanical and chemical properties of diamond and diamond-like-carbon films (D/DLCF). Three specific goals were established. They were: (1) To identify problem areas which produce concern and require a better knowledge of D/DLCF properties. (2) To identify and prioritize key properties of D/DLCF to promote transportation applications. (3) To identify needs for improvement in properties-measurement methods. Each of these goals is addressed subsequently.

Blau, P.J.; Clausing, R.E. [Oak Ridge National Lab., TN (United States); Ajayi, O.O.; Liu, Y.Y.; Purohit, A. [Argonne National Lab., IL (United States); Bartelt, P.F. [Deere & Co., Moline, IL (United States); Baughman, R.H. [Allied Signal, Morristown, NJ (United States); Bhushan, B. [Ohio State Univ., Columbus (United States); Cooper, C.V. [United Technologies Research Center, East Hartford, CT (United States); Dugger, M.T. [Sandia National Laboratories, Albuquerque, NM (United States); Freedman, A. [Aerodyne Research, Inc., Billerica, MA (United States); Larsen-Basse, J. [National Science Foundation, Washington, DC (United States); McGuire, N.R. [Caterpillar, Peoria, IL (United States); Messier, R.F. [Pennsylvania State Univ., University Park (United States); Noble, G.L.; Ostrowki, M.H. [John Crane, Inc., Morton Grove, IL (United States); Sartwell, B.D. [Naval Research Lab., Washington, DC (United States); Wei, R. [Colorado State Univ., Fort Collins (United States)

1993-01-01T23:59:59.000Z

214

Solar panels as air Cherenkov detectors for extremely high energy cosmic rays  

E-Print Network [OSTI]

Increasing interest towards the observation of the highest energy cosmic rayshas motivated the development of new detection techniques. The properties ofthe Cherenkov photon pulse emitted in the atmosphere by these very rareparticles indicate low-cost semiconductor detectors as good candidates fortheir optical read-out. The aim of this paper is to evaluate the viability of solar panels for thispurpose. The experimental framework resulting from measurements performed withsuitably-designed solar cells and large conventional photovoltaic areas ispresented. A discussion on the obtained and achievable sensitivities follows.

Cecchini, S; Esposti, L D; Giacomelli, G; Guerra, M; Lax, I; Mandrioli, G; Parretta, A; Sarno, A; Schioppo, R; Sorel, M; Spurio, M

2000-01-01T23:59:59.000Z

215

Solar panels as air Cherenkov detectors for extremely high energy cosmic rays  

E-Print Network [OSTI]

Increasing interest towards the observation of the highest energy cosmic rays has motivated the development of new detection techniques. The properties of the Cherenkov photon pulse emitted in the atmosphere by these very rare particles indicate low-cost semiconductor detectors as good candidates for their optical read-out. The aim of this paper is to evaluate the viability of solar panels for this purpose. The experimental framework resulting from measurements performed with suitably-designed solar cells and large conventional photovoltaic areas is presented. A discussion on the obtained and achievable sensitivities follows.

S. Cecchini; I. D'Antone; L. Degli Esposti; G. Giacomelli; M. Guerra; I. Lax; G. Mandrioli; A. Parretta; A. Sarno; R. Schioppo; M. Sorel; M. Spurio

2000-02-07T23:59:59.000Z

216

Panel Discussion: New Directions in Human Reliability Analysis for Oil & Gas, Cybersecurity, Nuclear, and Aviation  

SciTech Connect (OSTI)

This panel will discuss what new directions are necessary to maximize the usefulness of HRA techniques across different areas of application. HRA has long been a part of Probabilistic Risk Assessment in the nuclear industry as it offers a superior standard for risk-based decision-making. These techniques are continuing to be adopted by other industries including oil & gas, cybersecurity, nuclear, and aviation. Each participant will present his or her ideas concerning industry needs followed by a discussion about what research is needed and the necessity to achieve cross industry collaboration.

Harold S. Blackman; Ronald Boring; Julie L. Marble; Ali Mosleh; Najmedin Meshkati

2014-10-01T23:59:59.000Z

217

Phase-change materials to improve solar panel's performance Pascal Biwole1,2,*  

E-Print Network [OSTI]

-change materials to improve solar panel's performance Pascal Biwole1,2,* , Pierre Eclache3 , Frederic Kuznik3 1-mail:phbiwole@unice.fr Abstract: High operating temperatures induce a loss of efficiency in solar photovoltaic and thermal panels set-up. Results show that adding a PCM on the back of a solar panel can maintain the panel

218

Optimization on Solar Panels: Finding the Optimal Output Brian Y. Lu  

E-Print Network [OSTI]

Optimization on Solar Panels: Finding the Optimal Output Brian Y. Lu January 1, 2013 1 Introduction of solar panel: Routing the configuration between solar cells with a switch matrix. However, their result models and control policies for the optimal output of solar panels. The smallest unit on a solar panel

Lavaei, Javad

219

BACKGROUND REPORTS FOR THE CALIFORNIA CARBON CAPTURE AND STORAGE REVIEW PANEL  

E-Print Network [OSTI]

BACKGROUND REPORTS FOR THE CALIFORNIA CARBON CAPTURE AND STORAGE REVIEW PANEL Prepared by the Technical Advisory Team in support of The California Carbon Capture and Storage Review Panel 12 Carbon Capture and Storage Review Panel Contents 1. Overview of the Carbon Capture and Storage Panel

220

INTERNATIONAL SERVICES OFFICE UNIVERSITY OF ROCHESTER 213 Morey Hall, Box 270446, Rochester, NY 14627 Phone: (585) 275-2866 Fax: (585) 276-2943  

E-Print Network [OSTI]

to your University funding, certification from your academic program is required, by signature below: $ Funding Sources University Funding (signature required): Non-University Funding Scholarship: $ PersonalINTERNATIONAL SERVICES OFFICE UNIVERSITY OF ROCHESTER 213 Morey Hall, Box 270446, Rochester, NY

Mahon, Bradford Z.

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

200 Seeley W. Mudd Building Mail Code 4701 500 West 120th Street New York, NY 10027 212-854-4458 Fax 212-854-8257  

E-Print Network [OSTI]

200 Seeley W. Mudd Building Mail Code 4701 500 West 120th Street New York, NY 10027 212 rooms are subject to state sales tax, city occupancy tax, and NYS hotel unit fee. Weekend rates may run

Columbia University

222

Atomic Safety and Licensing Board Panel Biennial Report, Fiscal Years 1993--1994. Volume 6  

SciTech Connect (OSTI)

In Fiscal Year 1993, the Atomic Safety and Licensing Board Panel (``the Panel``) handled 30 proceedings. In Fiscal Year 1994, the Panel handled 36 proceedings. The cases addressed issues in the construction, operation, and maintenance of commercial nuclear power reactors and other activities requiring a license form the Nuclear Regulatory Commission. This report sets out the Panel`s caseload during the year and summarizes, highlight, and analyzes how the wide- ranging issues raised in those proceedings were addressed by the Panel`s judges and licensing boards.

NONE

1995-08-01T23:59:59.000Z

223

Appendix C: Installation of Simpson Strong-Tie Storm Panel Screws The Storm Panel Screws are currently available in Hawai`i and meet the International  

E-Print Network [OSTI]

are prepared before installation by following the four P's: 1) Precut the panels to the proper dimensions) Pull off the panel. 6) Adjust screw penetrations so that the spacer between the top set of screw

Wang, Yuqing

224

Lunar Rover Solar Panel MountTeam Members: Tian Le, Tudor Boiangiu, Jeremy Chan, James Haensel To develop a mechanized mount for a solar panel to  

E-Print Network [OSTI]

Lunar Rover Solar Panel MountTeam Members: Tian Le, Tudor Boiangiu, Jeremy Chan, James Haensel To develop a mechanized mount for a solar panel to be mounted on a lunar rover. Must be: · capable of orienting panel towards sun · reside on mast extending vertically from rover · capable of unfurling solar

225

Every Teacher a Teacher of Reading?: A Systematic Literature Review of Content-Area Literacy  

E-Print Network [OSTI]

...................................................................................... 15 The Historical Context of Content-Area Literacy Research ............ 15 Content-Area Literacy Over the Past Century ......................... 16 National Reading Panel and Common Core State Standards ... 19 Common Core Standards... .............................................................................................. 32 Introduction ..................................................................................... 32 Previous Reviews of Content-Area Literacy Research .................... 33 Evidence of Educational Research and U.S. National...

Scott, Chyllis Elayne

2013-08-07T23:59:59.000Z

226

Solar Panels Plus LLC | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov Pty Ltd Jump to:Information Silver Peak AreaOutline

227

High efficacy plasma display panel with vertically raised bus electrodes  

SciTech Connect (OSTI)

The authors propose a high efficacy alternating current plasma display panel utilizing vertically raised multilayer bus electrodes. The cell structure was designed to provide an opposite discharge mode and low discharge current in a relatively long gap. The test panels having discharge gaps of 330, 350, and 370 {mu}m were fabricated and basic properties of the panel were investigated in terms of current-voltage characteristics, luminance, and luminous efficiency. The cells with proposed structure show higher luminance and lower current simultaneously. The improvement in luminous efficiency is found to be a factor of 2 compared with the conventional coplanar structure having an electrode gap of 60 {mu}m. Emission spectra and spatio-temporal distribution of infrared light in discharge were measured. It is shown that high luminous efficiency of proposed cell originates from high excitation efficiency, low surface loss of charged particles, and enlarged discharge volume.

Ok, Jung-Woo; Lee, Hae June; Kim, Dong-Hyun; Park, Chung-Hoo; Lee, Ho-Jun; Kim, Jae-Sung; Choi, Kwang-Yeol [Department of Electrical Engineering, Pusan National University, Geumjeong-gu, Busan 609-735 (Korea, Republic of); PDP R and D Department, PDP Division, LG Electronics Inc., Gumi 730-030 (Korea, Republic of); Digital Display Research Laboratory, LG Electronics Inc., Seoul 137-724 (Korea, Republic of)

2006-10-30T23:59:59.000Z

228

Plasma Panel Sensors for Particle and Beam Detection  

E-Print Network [OSTI]

The plasma panel sensor (PPS) is an inherently digital, high gain, novel variant of micropattern gas detectors inspired by many operational and fabrication principles common to plasma display panels (PDPs). The PPS is comprised of a dense array of small, plasma discharge, gas cells within a hermetically-sealed glass panel, and is assembled from non-reactive, intrinsically radiation-hard materials such as glass substrates, metal electrodes and mostly inert gas mixtures. We are developing the technology to fabricate these devices with very low mass and small thickness, using gas gaps of at least a few hundred micrometers. Our tests with these devices demonstrate a spatial resolution of about 1 mm. We intend to make PPS devices with much smaller cells and the potential for much finer position resolutions. Our PPS tests also show response times of several nanoseconds. We report here our results in detecting betas, cosmic-ray muons, and our first proton beam tests.

Peter S. Friedman; Robert Ball; James R. Beene; Yan Benhammou; E. H. Bentefour; J. W. Chapman; Erez Etzion; Claudio Ferretti; Nir Guttman; Daniel S. Levin; Meny Ben-Moshe; Yiftah Silver; Robert L. Varner; Curtis Weaverdyck; Bing Zhou

2012-11-23T23:59:59.000Z

229

Creation of a U.S. Phosphorescent OLED Lighting Panel Manufacturing Facility  

SciTech Connect (OSTI)

Universal Display Corporation (UDC) has pioneered high efficacy phosphorescent OLED (PHOLED™) technology to enable the realization of an exciting new form of high quality, energy saving solid-date lighting. In laboratory test devices, we have demonstrated greater than 100 lm/W conversion efficacy. In this program, Universal Display will demonstrate the scalability of its proprietary UniversalPHOLED technology and materials for the manufacture of white OLED lighting panels that meet commercial lighting targets. Moser Baer Technologies will design and build a U.S.- based pilot facility. The objective of this project is to establish a pilot phosphorescent OLED (PHOLED) manufacturing line in the U.S. Our goal is that at the end of the project, prototype lighting panels could be provided to U.S. luminaire manufacturers for incorporation into products to facilitate the testing of design concepts and to gauge customer acceptance, so as to facilitate the growth of the embryonic U.S. OLED lighting industry. In addition, the team will provide a cost of ownership analysis to quantify production costs including OLED performance metrics which relate to OLED cost such as yield, materials usage, cycle time, substrate area, and capital depreciation. This project was part of a new DOE initiative designed to help establish and maintain U.S. leadership in this program will support key DOE objectives by showing a path to meet Department of Energy Solid-State Lighting Manufacturing Roadmap cost targets, as well as meeting its efficiency targets by demonstrating the energy saving potential of our technology through the realization of greater than 76 lm/W OLED lighting panels by 2012.

Hack, Michael

2013-09-30T23:59:59.000Z

230

Behavior of Concrete Panels Reinforced with Synthetic Fibers, Mild Steel, and GFRP Composites Subjected to Blasts  

SciTech Connect (OSTI)

The paper presents experimental data generated for calibrating finite element models to predict the performance of reinforced concrete panels with a wide range of construction details under blast loading. The specimens were 1.2 m square panels constructed using Normal Weight Concrete (NWC) or Fiber Reinforced Concrete (FRC). FRC consisted of macro-synthetic fibers dispersed in NWC. Five types of panels were tested: NWC panels with steel bars; FRC panels without additional reinforcement; FRC panels with steel bars; NWC panels with glass fiber reinforced polymer (GFRP) bars; and NWC panels reinforced with steel bars and external GFRP laminates on both faces. Each panel type was constructed with three thicknesses: 152 mm, 254 mm, and 356 mm. FRC panels with steel bars had the best performance for new construction. NWC panels reinforced with steel bars and external GFRP laminates on both faces had the best performance for strengthening or rehabilitation of existing structures. The performance of NWC panels with GFRP bars was strongly influenced by the bar spacing. The behavior of the panels is classified in terms of damage using immediate occupancy, life safety, and near collapse performance levels. Preliminary dynamic simulations are compared to the experimental results.

C. P. Pantelides; T. T. Garfield; W. D. Richins; T. K. Larson; J. E. Blakeley

2012-03-01T23:59:59.000Z

231

Status of iron-enriched basalt as a medium for nuclear waste immobilization: a report by an independent peer review panel  

SciTech Connect (OSTI)

The purpose of the Peer Review Panel was to provide an independent review by experts in nuclear waste processing and materials on the adequacy of the existing data base for the iron-enriched basalt waste form developed by EG and G Idaho, and to evaluate the broad range of proposed applications for this waste form. It was not the purpose of this review to specifically rank iron-enriched basalt against other nuclear waste forms. It was the concensus of the Peer Review Panel that the concept, experimental research, and identification of potential applications of the iron-enriched basalt waste form were of high quality. Iron-enriched basalt is a primarily ceramic waste form with a residual glass phase. It has a broad range of composition, permitting the incorporation of a wide variety of nuclear wastes. The product has good mechanical strength and produces very low quantities of respirable particles under impact conditions. Matrix dissolution rates under neutral pH conditions are comparable to or lower than those of borosilicate glass. In the area of waste form characterization, the Panel recommended additional static and dynamic leaching tests as a function of pH and CO/sub 2/ in solution, and in brine solutions of varying composition. The panel also recommended that unprocessed transuranic (TRU) wastes be subjected to leach tests. Large-scale iron-enriched basalt castings in which the grain growth was uncontrolled have been observed to be less durable than controlled-grain-growth laboratory-scale castings. Therefore, the Panel also recommended leaching tests as a function of microstructure to determine ranges of acceptable microstructure. In the area of the IEB production process, the Panel recommended a variety of laboratory-scale and pilot plant-scale research.

Palmour, H. III; Dosch, R.G.; Macedo, P.B.; Machiels, A.J.; Owen, D.E.

1981-09-01T23:59:59.000Z

232

FESAC FUSION SIMULATION PROJECT (FSP) PANEL REPORT William Tang1  

E-Print Network [OSTI]

power plant (DEMO), further science and technology is needed to achieve the 2500 MW of continuous power1 FESAC FUSION SIMULATION PROJECT (FSP) PANEL REPORT William Tang1 , Riccardo Betti2 , Jeffrey) to FESAC, Dr. Raymond Orbach clearly identifies the overarching objective of the proposed Fusion Simulation

233

Modular container assembled from fiber reinforced thermoplastic sandwich panels  

DOE Patents [OSTI]

An improved, load bearing, modular design container structure assembled from thermoformed FRTP sandwich panels in which is utilized the unique core-skin edge configuration of the present invention in consideration of improved load bearing performance, improved useful load volume, reduced manufacturing costs, structural weight savings, impact and damage tolerance and repair and replace issues.

Donnelly, Mathew William (Edgewood, NM); Kasoff, William Andrew (Albuquerque, NM); Mcculloch, Patrick Carl (Irvine, CA); Williams, Frederick Truman (Albuquerque, NM)

2007-12-25T23:59:59.000Z

234

Solar panels are cost intensive, have limitations with respect to  

E-Print Network [OSTI]

advantage of being able to convert sunlight into clean energy. After the glass is coated, we install clean electricity. Advantages · Building-integratable. · Contributes to EU targets towards energySolar panels are cost intensive, have limitations with respect to where they can be integrated

Langendoen, Koen

235

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

Scientific Review Panel (ISRP) conduct a review of the Spring Chinook Hatchery Program of the Lower Snake River Compensation Plan (LSRCP). The LSRCP was authorized by Congress in 1976 to conduct fish hatchery operations to produce a return of 58,700 adult spring/summer Chinook salmon above Lower Granite Dam after

236

1999IEEE Power Society Summer Meeting Panel Session  

E-Print Network [OSTI]

61801 Background The electricity industry is in the middle of its greatest upheaval since Edison began. At the same time, the pace of developmentin technology has never been more rapid. The harnessing of new and the potential benefits attainable from new advances in technology. 624 #12;The panel addresses the compendium

Gross, George

237

PRESENTATION TO NRC BURNING PLASMA PANEL DR. STEPHEN O. DEAN  

E-Print Network [OSTI]

JANUARY 17, 2003 In response to request by panel co-chair John Ahearne as follows: "We have heard from" #12;2 BOTTOM LINES FUSION IS NOT ON THE RADAR SCREEN OF THE U. S. ELECTRIC UTILITIES ! To get DEVELOPMENT WOULD ALSO ATTRACT INTEREST FROM INDUSTRY GENERAL ATOMICS, FOR HISTORICAL REASONS, IS UNIQUE

238

An overview of the gate and panel industry  

E-Print Network [OSTI]

acquiring raw materials, its pre-fabrication, welding, touch-up, and delivery of the product. My first major responsibility for Texas Gate and Panel was to expand its sales territory. It soon became obvious that a thorough knowledge of my competitors...

Fisher, C. West

2000-01-01T23:59:59.000Z

239

Report of the Technical' Panel on Magnetic Fusion  

E-Print Network [OSTI]

;Grumman CorporationBethpage, New York 11714-3580 Joseph G. Gavin, Jr Senior Management Consultant DecemberDOE/S-O035 Report of the Technical' Panel on Magnetic Fusion of the Energy Research Advisory Board November 1986 A Report of the Energy Research Advisory Board to the United States Department of Energy

240

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6th of British Columbia, Vancouver, B.C., Canada. Scientific Peer Review Group Members Jack Griffith, Ph. D., Consulting Fisheries Scientist, formerly Professor at Idaho State University. William Liss, Ph.D., Professor

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

1 Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6 th conditions. Conditions one and two pertained to the relationship of JCAPE to the Idaho Supplementation Study. These conditions were addressed as part of the ISRP's Idaho Supplementation Study review (ISRP 2003

242

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

1 Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6th Loudenslager, ISRP Chair Subject: Response Request for Idaho Department of Fish and Game's Accord proposal, Idaho Nutrient Enhancement Project (2008-607-00) Background At the Council's July 9, 2010 request

243

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

1 Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6 th specific conditions. Conditions one and two pertained to the relationship of JCAPE to the Idaho recommendation regarding the Idaho Supplementation Study in 2003; consequently, the Council did not request

244

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

. Scientific Peer Review Group Members Jim Congleton, Ph.D., Emeritus Fisheries Professor, University of IdahoIndependent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6th of Fish and Wildlife Resources, University of Idaho, an expert in large river fisheries population

245

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6 th the Idaho Department of Fish and Game's Master Plan for the Snake River Sockeye Program (#2007's responses to the Step 1 scientific review elements specified by the Council. Although this is a Step 1

246

Independent Scientific Review Panel for the Northwest Power Planning Council  

E-Print Network [OSTI]

Independent Scientific Review Panel for the Northwest Power Planning Council 851 SW 6th Avenue, Suite 1100 Portland, Oregon 97204 isrp@nwppc.org Review of Idaho Supplementation Studies (IDFG 2003-8 May 22, 2003 #12;ISRP 2003-8 ISS Review i ISRP Review of Idaho Supplementation Studies Contents

247

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

1 Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6th, 2009 To: W. Bill Booth, Council Chair From: Eric Loudenslager, ISRP Chair Subject: Review of Idaho Department of Fish and Game's Revised Southern Idaho Wildlife Mitigation projects (1995-057-00 and -01

248

Independent Scientific Review Panel for the Northwest Power Planning Council  

E-Print Network [OSTI]

Independent Scientific Review Panel for the Northwest Power Planning Council Preliminary Review to ISRP comments requested Report Page # 24001 Lake Pend Oreille Predation Research Idaho Fish and Game No and conserve high priority bull and westslope cutthroat trout habitat in Trestle Creek. Idaho Department

249

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6th, University of Idaho, an expert in large river fisheries population dynamics, and salmon, trout and char Section, University of British Columbia, Vancouver, B.C., Canada. Scientific Peer Review Group Members Jim

250

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6th' Southern Idaho Wildlife Mitigation Project 199505702 Background At the Council's April 24, 2007 request, the ISRP reviewed a revised proposal for the Shoshone- Bannock Tribes' Southern Idaho Wildlife Mitigation

251

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

scientific criteria? Page 198909800 Idaho Supplementation Studies IDFG / NPT / SBT Mountain Snake Salmon $1Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6th Ecosystem Science Section, University of British Columbia, Vancouver, B.C., Canada. Scientific Peer Review

252

Independent Scientific Review Panel for the Northwest Power & Conservation Council  

E-Print Network [OSTI]

1 Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6th Chair Subject: Final Review of Idaho Department of Fish and Game's Accord proposal, Idaho Nutrient Idaho Department of Fish and Game's (IDFG) response to a preliminary ISRP review of the Accord proposal

253

Panel Damping Loss Factor Estimation Using The Random Decrement Technique  

E-Print Network [OSTI]

The use of the Random Decrement Technique (RDT) for estimating panel damping loss factors ranging from 1% to 10% is examined in a systematic way, with a focus on establishing the various parameters one must specify to use the technique to the best...

Dande, Himanshu Amol

2010-12-10T23:59:59.000Z

254

THE EGYPT LABOR MARKET PANEL SURVEY: INTRODUCING THE 2012 ROUND  

E-Print Network [OSTI]

#12;THE EGYPT LABOR MARKET PANEL SURVEY: INTRODUCING THE 2012 ROUND Ragui Assaad and Caroline Egypt www.erf.org.eg Copyright © The Economic Research Forum, 2013 All rights reserved. No part our data to other statistical sources for Egypt to evaluate the representativeness of the sample

Levinson, David M.

255

UNL Faculty Provide Updates to the Water Resources Advisory Panel  

E-Print Network [OSTI]

UNL Faculty Provide Updates to the Water Resources Advisory Panel By Rachael Herpel, Outreach and Education Specialist, UNL Water Center and NU Rural Initiative The University of Nebraska- Lincoln's Water of guidance for UNL's water research, education and outreach programming. When WRAP first met in 2006

Nebraska-Lincoln, University of

256

Panel on the Future of BPM Research/Publications  

E-Print Network [OSTI]

PAGE 0 Panel on the Future of BPM Research/Publications August 29th 2013, 13.00-13.30 Wil van der Aalst (moderator), Florian Daniel, Jianmin Wang, Barbara Weber (BPM PC chairs 2013), Shazia Sadiq, Pnina Soffer, Hagen Völzer (BPM PC chairs 2014) #12;Motivation · For the first time, BPM authors were asked

van der Aalst, Wil

257

Developing a SNP panel for forensic identification of individuals  

E-Print Network [OSTI]

Developing a SNP panel for forensic identification of individuals Kenneth K. Kidd a,*, Andrew J) are likely in the near future to have a fundamental role in forensics in both human identification www.elsevier.com/locate/forsciint Forensic Science International 164 (2006) 20­32 * Corresponding

Kidd, Kenneth

258

Studying impact damage on carbon-fiber reinforced aircraft composite panels with sonicir  

SciTech Connect (OSTI)

Composites are becoming more important materials in commercial aircraft structures such as the fuselage and wings with the new B787 Dreamliner from Boeing which has the target to utilize 50% by weight of composite materials. Carbon-fiber reinforced composites are the material of choice in aircraft structures. This is due to their light weight and high strength (high strength-to-weight ratio), high specific stiffness, tailorability of properties, design flexibility etc. Especially, by reducing the aircraft's body weight by using such lighter structures, the cost of fuel can be greatly reduced with the high jet fuel price for commercial airlines. However, these composites are prone to impact damage and the damage may occur without any observable sign on the surface, yet resulting in delaminations and disbonds that may occur well within the layers. We are studying the impact problem with carbon-fiber reinforced composite panels and developing SonicIR for this application as a fast and wide-area NDE technology. In this paper, we present our results in studying composite structures including carbon-fiber reinforced composite materials, and preliminary quantitative studies on delamination type defect depth identification in the panels.

Han Xiaoyan; Zhang Ding; He Qi; Song Yuyang; Lubowicki, Anthony [Department of Electrical and Computer Engineering, Wayne State University, Detroit, MI 48202 (United States); Zhao Xinyue; Newaz, Golam. [Department of Mechanical Engineering, Wayne State University, Detroit, MI 48202 (United States); Favro, Lawrence D.; Thomas, Robert L. [Department of Physics and Astronomy, Wayne State University, Detroit, MI 48202 (United States)

2011-06-23T23:59:59.000Z

259

Report on Hydrogen Storage Panel Findings in DOE-BES Sponsored...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Hydrogen Storage Panel Findings in DOE-BES Sponsored Workshop on Basic Research for Hydrogen Production, Storage and Use Report on Hydrogen Storage Panel Findings in DOE-BES...

260

Final Report of theIgneous Consequences Peer Review Panel | Department...  

Broader source: Energy.gov (indexed) [DOE]

Final Report of theIgneous Consequences Peer Review Panel A report for the DOE on the Yucca Mountain Project. Final Report of the Igneous Consequences Peer Review Panel...

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

E-Print Network 3.0 - ad hoc panel Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

panel Search Powered by Explorit Topic List Advanced Search Sample search results for: ad hoc panel Page: << < 1 2 3 4 5 > >> 1 Part 500, Chapter 25 SCIENTIFIC MISCONDUCT REVIEW...

262

STFC Astronomy Advisory Panel Draft 2012 Programmatic Review report to PPAN (October 2012)  

E-Print Network [OSTI]

#12;STFC Astronomy Advisory Panel Draft 2012 Programmatic Review report to PPAN (October 2012) Astronomy Advisory Panel: Richard Bower (Durham University), Michael Brown (University of Manchester), Anthony Challinor (University of Cambridge), Chris Evans (STFC United Kingdom Astronomy Technology Centre

Crowther, Paul

263

Design and analysis of a concrete modular housing system constructed with 3D panels  

E-Print Network [OSTI]

An innovative modular house system design utilizing an alternative concrete residential building system called 3D panels is presented along with an overview of 3D panels as well as relevant methods and markets. The proposed ...

Sarcia, Sam Rhea, 1982-

2004-01-01T23:59:59.000Z

264

Panel assemblage for housing : some form and construction explorations for small buildings  

E-Print Network [OSTI]

This thesis examines the consequences of building homes in a factory and explores viable construction alternatives using factory-made panels. The exploration considers panelized systems of dwelling construction and its ...

Borenstein, David Reed

1984-01-01T23:59:59.000Z

265

Semiconductor-based, large-area, flexible, electronic devices  

SciTech Connect (OSTI)

Novel articles and methods to fabricate the same resulting in flexible, large-area, triaxially textured, single-crystal or single-crystal-like, semiconductor-based, electronic devices are disclosed. Potential applications of resulting articles are in areas of photovoltaic devices, flat-panel displays, thermophotovoltaic devices, ferroelectric devices, light emitting diode devices, computer hard disc drive devices, magnetoresistance based devices, photoluminescence based devices, non-volatile memory devices, dielectric devices, thermoelectric devices and quantum dot laser devices.

Goyal, Amit (Knoxville, TN)

2011-03-15T23:59:59.000Z

266

Dying Green A Film Screening and Panel Discussion about Green Burial  

E-Print Network [OSTI]

Dying Green A Film Screening and Panel Discussion about Green Burial March 20, 2014 6:00pm ­ 8:00pm to rest. The "Green Burial" movement is catching on in the U.S., and green cemetery options are now and panel discussion of the award-winning documentary, Dying Green (2011). Panel participants include Joshua

Virginia Tech

267

JANUARY 2007 THE BP U.S. REFINERIES INDEPENDENT SAFETY REVIEW PANEL  

E-Print Network [OSTI]

OF JANUARY 2007 THE REPORT THE BP U.S. REFINERIES INDEPENDENT SAFETY REVIEW PANEL #12;From left;PANEL STATEMENT The B.P. U.S. Refineries Independent Safety Review Panel i Process safety accidents can be prevented. On March 23, 2005, the BP Texas City refinery experienced a catastrophic process accident

Leveson, Nancy

268

Law School Admissions Panel Law School representatives will discuss the law school admissions  

E-Print Network [OSTI]

Law School Admissions Panel Law School representatives will discuss the law school admissions process and talk about their respective schools in a panel discussion format. Join us and learn how in Law School Admissions Panel epresentatives will discuss the law school admissions process and talk

Brinkmann, Peter

269

11-level Cascaded H-bridge Grid-tied Inverter Interface with Solar Panels  

E-Print Network [OSTI]

11-level Cascaded H-bridge Grid-tied Inverter Interface with Solar Panels Faete Filho, Yue Cao multilevel DC-AC grid-tied inverter. Each inverter bridge is connected to a 200 W solar panel. OPAL-RT lab match. A novel SPWM scheme is proposed in this paper to be used with the solar panels that can account

Tolbert, Leon M.

270

Research Areas  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest RegionatSearch Welcome toResearch Areas Our Vision National User Facilities

271

Research Areas  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest RegionatSearch Welcome toResearch Areas Our Vision National User

272

Belowground Carbon Cycling Processes at the Molecular Scale: An EMSL Science Theme Advisory Panel Workshop  

SciTech Connect (OSTI)

As part of the Belowground Carbon Cycling Processes at the Molecular Scale workshop, an EMSL Science Theme Advisory Panel meeting held in February 2013, attendees discussed critical biogeochemical processes that regulate carbon cycling in soil. The meeting attendees determined that as a national scientific user facility, EMSL can provide the tools and expertise needed to elucidate the molecular foundation that underlies mechanistic descriptions of biogeochemical processes that control carbon allocation and fluxes at the terrestrial/atmospheric interface in landscape and regional climate models. Consequently, the workshop's goal was to identify the science gaps that hinder either development of mechanistic description of critical processes or their accurate representation in climate models. In part, this report offers recommendations for future EMSL activities in this research area. The workshop was co-chaired by Dr. Nancy Hess (EMSL) and Dr. Gordon Brown (Stanford University).

Hess, Nancy J.; Brown, Gordon E.; Plata, Charity

2014-02-21T23:59:59.000Z

273

Heat Recovery From Arc Furnaces Using Water Cooled Panels  

E-Print Network [OSTI]

HEAT RECOVERY FROM ARC FURNACES USING WATER COOLED PANELS D. F. Darby Deere & Company Moline, Illinois ABSTRACT In 1980-81, the John Deere Foundry at East Moline underwent an expansion program that in creased its capacity by over 60...%. This expansion was centered around the melt department where the four existing 13MVA electric arc furnaces were augmented with two additional 13MVA arc furnaces. A waste heat recovery system was installed on all six of the arc furnaces which, with modifica...

Darby, D. F.

274

CDM Accreditation Panel CDM AP | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectricEnergyCTBarreis a city in Chittenden County,47Accreditation Panel CDM AP

275

Ann. N.Y. Acad. Sci. ISSN 0077-8923 Introduction to Climate Change Adaptation in New  

E-Print Network [OSTI]

change and the high costs and long-term planning needed to adapt effectively, investment can responsive climate change adaptation measures, both in the near- and long-term, that protect its citizens day more people recognize it as a major concern. An international panel of leading climate scientists

276

Ann. N.Y. Acad. Sci. ISSN 0077-8923 ANNALS OF THE NEW YORK ACADEMY OF SCIENCES  

E-Print Network [OSTI]

into account the potential risks of climate change on the city's water supply, drainage, and wastewater Panel on Climate Change 2010 Report Chapter 1: New York City adaptation in context Cynthia Rosenzweig1.3 Current actions in New York City 1.4 National and global climate change adaptation initiatives 1.5 Keys

277

ANDRS ESTRADA WIECHERS 435 W 119th st. 10H New York, NY 10027 +1 (347) 599-4982  

E-Print Network [OSTI]

- CONACYT Scholarship - COMECYT Scholarship 2012 - Solar water heating system installation 2011 ENGINEERING (IngenierĂ­a Ambiental S.A. de C.V.) Design and construct electrical control panels for pumping of Ag(III) for oxidation of organic compounds" - Completed the San Valero Open Studies Solar Thermal

278

Surveying Upstate NY Well Water for Pesticide Contamination: Cayuga and Orange Counties  

E-Print Network [OSTI]

groundwater knowledge, risk modeling, aerial photo assessments and pesticide application database mapping. 1 #12;1. INTRODUCTION Pesticide transport from agricultural and other sources to groundwater sampled to determine the occurrence of pesticide contamination of groundwater in areas where significant

Walter, M.Todd

279

The inverse problems of wing panel manufacture processes  

SciTech Connect (OSTI)

It is shown that inverse problems of steady-state creep bending of plates in both the geometrically linear and nonlinear formulations can be represented in a variational formulation. Steady-state values of the obtained functionals corresponding to the solutions of the problems of inelastic deformation and springback are determined by applying a finite element procedure to the functionals. Optimal laws of creep deformation are formulated using the criterion of minimizing damage in the functionals of the inverse problems. The formulated problems are reduced to the problems solved by the finite element method using MSC.Marc software. Currently, forming of light metals poses tremendous challenges due to their low ductility at room temperature and their unusual deformation characteristics at hot-cold work: strong asymmetry between tensile and compressive behavior, and a very pronounced anisotropy. We used the constitutive models of steady-state creep of initially transverse isotropy structural materials the kind of the stress state has influence. The paper gives basics of the developed computer-aided system of design, modeling, and electronic simulation targeting the processes of manufacture of wing integral panels. The modeling results can be used to calculate the die tooling, determine the panel processibility, and control panel rejection in the course of forming.

Oleinikov, A. I., E-mail: a.i.oleinikov@mail.ru [Komsomolsk-on-Amur State Technical University, Lenina prospect 27, Komsomolsk-on-Amur, 681013, Russian Federation, and Institute of Machinery and Metallurgy Far Eastern Branch of the Russian Academy of Sciences, Metallurgov Street 1, Komsomolsk-on-Am (Russian Federation); Bormotin, K. S., E-mail: cvmi@knastu.ru [Komsomolsk-on-Amur State Technical University, Lenina prospect 27, Komsomolsk-on-Amur, 681013, Russian Federation (Russian Federation)

2013-12-16T23:59:59.000Z

280

Structural behavior of silicone bonded glass block panels  

SciTech Connect (OSTI)

Silicone sealant was submitted for mortar in bonding glass blocks. The sealant`s tensile and shear strengths and stiffnesses were determined. Joints bonding two glass blocks were tested for stiffness and strength in tension, bending, out-of-plane shear, and in-plane shear. Bending tests were done on specimens one block wide and four blocks long to evaluate one-way bending behavior. A six block by six block panel, supported on all four sides, was built and tested under simulated wind load. An analytical model with material nonlinearity in the joints was developed for the one-way bending case. It gave good comparisons with the experimental data to load levels approaching failure. A more complex analytical model was developed for the two-way panel. It was only valid for lower load levels, in the range of potential allowable design loads, but compared well with test results. Silicone bonded glass block panels have potential for meeting the wind load requirements necessary for exterior use.

Chang, K.F. [Structural Engineering Associates, Inc., San Antonio, TX (United States); Sandberg, L.B. [Michigan Technological Univ. Houghton, MI (United States)

1996-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

The U.S. Department of Energy's Brookhaven National Laboratory P.O. Box 5000, Upton NY 11973 631 344-2345 www.bnl.gov User Facilities  

E-Print Network [OSTI]

. The CFN's overarching research goal is to help solve the U.S.'s energy problems by exploring materials-based energy sources and more affordable solar energy systems. Basic research on catalysts, biological and softThe U.S. Department of Energy's Brookhaven National Laboratory · P.O. Box 5000, Upton NY 11973

282

ACEEE Summer Study on Energy in Industry, West Point, NY, July 19-22. 1 Benchmarking Approaches: An Alternate Method to Determine Best  

E-Print Network [OSTI]

: An Alternate Method to Determine Best Practice by Examining Plant-Wide Energy Signatures Yogesh Patil and JohnACEEE Summer Study on Energy in Industry, West Point, NY, July 19-22. 1 Benchmarking Approaches Seryak, Energy & Resource Solutions, Inc. Kelly Kissock, University of Dayton ABSTRACT Baselining

Kissock, Kelly

283

The U.S. Department of Energy's Brookhaven National Laboratory P.O. Box 5000, Upton NY 11973 631 344-2345 www.bnl.gov Nuclear Physics  

E-Print Network [OSTI]

the Office of Nuclear Physics within the U.S. Department of Energy's Office of Science, RHIC gives physicists of Nuclear Physics within the U.S. Department of Energy's Office of Science Total Upgrade Cost: $ 700 millionThe U.S. Department of Energy's Brookhaven National Laboratory · P.O. Box 5000, Upton NY 11973

284

Presented at the 13 National Conference on Building Commissioning, May 4-6, 2005, New York, NY, and published in the Proceedings.  

E-Print Network [OSTI]

LBNL-58648 th Presented at the 13 National Conference on Building Commissioning, May 4-6, 2005, New York, NY, and published in the Proceedings. This work was supported by the State Technologies, Moosung Kim Lawrence Berkeley National Laboratory May 2005 #12;National Conference on Building

285

An Assessment of Inertial Confinement Fusion Target Physics A Panel on Fusion Target Physics ("the Panel") will serve as a technical resource to the  

E-Print Network [OSTI]

An Assessment of Inertial Confinement Fusion Target Physics A Panel on Fusion Target Physics ("the Panel") will serve as a technical resource to the Committee on Inertial Confinement Energy Systems ("the Physics will prepare a report that will assess the current performance of fusion targets associated

286

Southeast Idaho Area Links  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Area Attractions and Events Area Geography Area History Area Links Driving Directions Idaho Falls Attractions and Events INL History INL Today Research Park Sagebrush Steppe...

287

Large Panels with Common Factors and Spatial Correlations  

E-Print Network [OSTI]

;1 (#6;t) is bounded for all N , then under the granularity conditions (13)-(14) we have lim N!1 V ar(w0t#0;1zt jIt#0;1 ) = 0: A particular form of a CWD process arises when pairwise correlations take non-zero values only across ?nite subsets of units... sectional samples with strong co-movements. Panels with common factors have been applied to characterize the dynamic of stock and bond returns (Chamberlain and Rothschild 1983; Connor and Korajczyk, 1993; Kapetanios and Pesaran, 2007), and in macroeconomics...

Hashem, Pesaran

288

Second Panel of Disposal Rooms Completed in WIPP Underground  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administrationcontroller systemsBi (2) Sr (2)ScienceScientists InSearchsuperconduct*Chu|Second Panel

289

Structural Insulated Panel Association (SIPA) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revisionEnvReviewNonInvasiveExplorationUT-g GrantAtlas (PACAOpen EnergyInsulated Panel Association (SIPA) Jump to:

290

NASA/DOE/DOD nuclear propulsion technology planning: Summary of FY 1991 interagency panel results  

SciTech Connect (OSTI)

Interagency (NASA/DOE/DOD) technical panels worked in 1991 to evaluate critical nuclear propulsion issues, compare nuclear propulsion concepts for a manned Mars mission on a consistent basis, and to continue planning a technology development project for the Space Exploration Initiative (SEI). Panels were formed to address mission analysis, nuclear facilities, safety policy, nuclear fuels and materials, nuclear electric propulsion technology, and nuclear thermal propulsion technology. A summary of the results and recommendations of the panels is presented.

Clark, J.S.; Wickenheiser, T.J.; Doherty, M.P.; Marshall, A.; Bhattacharryya, S.K.; Warren, J.

1992-01-01T23:59:59.000Z

291

Archaeological investigations at a toolstone source area and temporary camp: Sample Unit 19-25, Nevada Test Site, Nye County, Nevada. Technical report No. 77  

SciTech Connect (OSTI)

Archaeological investigations were initiated at Sample Unit 19--25 to retrieve information concerning settlement and subsistence data on the aboriginal hunter and gatherers in the area. Studies included collection and mapping of 35.4 acres at site 26NY1408 and excavation and mapping of 0.02 acres at site 26NY7847. Cultural resources include two rock and brush structures and associated caches and a large lithic toolstone source area and lithic artifact scatter. Temporally diagnostic artifacts indicate periodic use throughout the last 12,000 years; however dates associated with projectile points indicate most use was in the Middle and Late Archaic. Radiocarbon dates from the rock and brush structures at site 26NY7847 indicate a construction date of A.D. 1640 and repair between A.D. 1800 and 1950 for feature 1 and between A.D. 1330 and 1390 and repair at A.D. 1410 for feature 2. The dates associated with feature 2 place its construction significantly earlier than similar structures found elsewhere on Pahute Mesa. Activity areas appear to reflect temporary use of the area for procurement of available lithic and faunal resources and the manufacture of tools.

Jones, R.C.; DuBarton, A.; Edwards, S.; Pippin, L.C.; Beck, C.M.

1993-12-31T23:59:59.000Z

292

Optimal design of actively cooled panels for hypersonic vehicles: A combined  

E-Print Network [OSTI]

Optimal design of actively cooled panels for hypersonic vehicles: A combined materials, Irvine The design of materials for the thermo-structural protection of fully reus- able hypersonic

Ponce, V. Miguel

293

Developement of a digitally controlled low power single phase inverter for grid connected solar panel.  

E-Print Network [OSTI]

?? The work consists in developing a power conversion unit for solar panel connected to the grid. This unit will be a single phase inverter… (more)

Marguet, Raphael

2010-01-01T23:59:59.000Z

294

E-Print Network 3.0 - automobile front panel Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Search Powered by Explorit Topic List Advanced Search Sample search results for: automobile front panel Page: << < 1 2 3 4 5 > >> 1 FUTURES OF AUTOMOBILE INDUSTRY AND...

295

Intelligent Daylight Panel Control System based on Fuzzy Control for Green Buildings  

E-Print Network [OSTI]

Abstract—This paper proposes an intelligent daylight panel control system based on fuzzy control theory for green buildings. The goal of this research is to automatically modulate sunlight efficiently and to enhance the quality of interior illuminations, thus reducing the need for artificial lighting and conserving energy. Daylight panels are typically installed on the outside of windows. By applying the proposed fuzzy controller, the reflection angle of daylight panels could be adjusted and optimized so that interior illuminative quality is improved and energy-saving is achieved at the same time. Index Terms—daylight panel, intelligent control, fuzzy control. I.

T. C. Kuo; J. S. Lin; Y. Takeuchi; Y. J. Huang

296

E-Print Network 3.0 - amorphous selenium flat-panel Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

22 Licensable Technologies Summary: 12;Licensable Technologies Applications: n Solar Cells n Sensors n Flat Panels n IC Circuits... and low-performance, low-cost...

297

Energy Materials and Processes, An EMSL Science Theme Advisory Panel Workshop  

SciTech Connect (OSTI)

The report summarizes discussions at the Energy Materials and Process EMSL Science Theme Advisory Panel Workshop held July 7-8, 2014.

Burk, Linda H.

2014-12-16T23:59:59.000Z

298

Estimation of Two Popular Econometric Models: Random Effects Panel Data Model and Simultaneous Equations Model  

E-Print Network [OSTI]

1994. [9] Greene, W. B. , Econometric Analysis, Pearson /and Semiparametric Panel Econometric Models: Estimation andDEPendent models. This econometric software package was

Liu, Yue

2013-01-01T23:59:59.000Z

299

amorphous silicon flat-panel: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

5 Asymmetric Electrical Properties of Half Corbino Hydrogenated Amorphous Silicon Thin-Film Transistor and Its Applications to Flat Panel Displays Materials Science...

300

Report of the Blue Ribbon Panel on the Review of the Radiation...  

Broader source: Energy.gov (indexed) [DOE]

October 11, 1995 This report summarizes the findings of the Blue Ribbon Panel's review of the RERF scientific projects and future research plans The report recommended that the...

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Annual Muslim Studies Program Conference Introduction, panel schedule and presenter biographical statements  

E-Print Network [OSTI]

: Essentialism and Resistance" 12:00-12:45 Lunch 1:00-2:15 Panel 3 Sylvia Chan-Malik, "Of Bikinis and Burqas

302

Dual-circuit embossed-sheet heat-transfer panel  

DOE Patents [OSTI]

A heat transfer panel provides redundant cooling for fusion reactors or the like environment requiring low-mass construction. Redundant cooling is provided by two independent cooling circuits, each circuit consisting of a series of channels joined to inlet and outlet headers. The panel comprises a welded joinder of two full-size and two much smaller partial-size sheets. The first full-size sheet is embossed for form first portions of channels for the first and second circuits, as well as a header for the first circuit. The second full-sized sheet is then laid over and welded to the first full-size sheet. The first and second partial-size sheets are then overlaid on separate portions of the second full-sized sheet, and are welded thereto. The first and second partial-sized sheets are embossed to form inlet and outlet headers, which communicate with channels of the second circuit through apertures formed in the second full-sized sheet.

Morgan, G.D.

1982-08-23T23:59:59.000Z

303

Performance of a high fill factor, indirect detection prototype flat-panel imager for mammography  

SciTech Connect (OSTI)

Empirical and theoretical investigations of the performance of a small-area, high-spatial-resolution, active matrix flat-panel imager, operated under mammographic conditions, is reported. The imager is based on an indirect detection array incorporating a continuous photodiode design, as opposed to the discrete photodiode design employed in conventional flat-panel imagers. Continuous photodiodes offer the prospect of higher fill factors, particularly for arrays with pixel pitches below {approx}100 {mu}m. The array has a pixel-to-pixel pitch of 75 {mu}m and a pixel format of 512x512, resulting in an active area of {approx}3.8x3.8 cm{sup 2}. The array was coupled to two commercially available, structured CsI:Tl scintillators of {approx}150 {mu}m thickness: one optimized for high light output (FOS-HL) and the other for high spatial resolution (FOS-HR), resulting in a pair of imager configurations. Measurements of sensitivity, modulation transfer function (MTF), noise power spectra (NPS), and detective quantum efficiency (DQE) were performed with a 26 kVp mammography beam at exposures ranging from {approx}0.5 to {approx}19 mR. MTF results from both CsI:Tl scintillators show that the array demonstrates good spatial resolution, indicating effective isolation between adjacent pixels. The effect of additive noise of the system on DQE was observed to be significantly higher for the FOS-HR scintillator compared to the FOS-HL scintillator due to lower sensitivity of the former. For the FOS-HL scintillator, DQE performance was generally high at high exposures, limited by the x-ray quantum efficiency, Swank factor and the MTF of the scintillators. For both scintillators, the DQE performance degrades at lower exposures due to the relatively large contribution of additive noise. Theoretical calculations based on a cascaded systems model were found to be in general agreement with the empirically determined NPS and DQE values. Finally, such calculations were used to predict potential DQE performance for hypothetical 50 {mu}m pixel pitch imagers, employing similar continuous photodiode design and realistic inputs derived from the empirical measurements.

El-Mohri, Youcef; Antonuk, Larry E.; Zhao Qihua; Wang Yi; Li Yixin; Du Hong; Sawant, Amit [Department of Radiation Oncology, University of Michigan Medical Center, Ann Arbor, Michigan 48109 (United States)

2007-01-15T23:59:59.000Z

304

Site Monitoring Area Maps  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to the Site Monitoring Area (SMA) The Site Monitoring Area sampler Control measures (best management practices) installed at the Site Monitoring Area Structures such as...

305

Wildlife Management Areas (Minnesota)  

Broader source: Energy.gov [DOE]

Certain areas of the State are designated as wildlife protection areas and refuges; new construction and development is restricted in these areas.

306

WTEC Panel Report on International Assessment of Research and Development in Simulation-Based Engineering and Science  

SciTech Connect (OSTI)

This WTEC panel report assesses the international research and development activities in the field of Simulation- Based Engineering and Science (SBE&S). SBE&S involves the use of computer modeling and simulation to solve mathematical formulations of physical models of engineered and natural systems. SBE&S today has reached a level of predictive capability that it now firmly complements the traditional pillars of theory and experimentation/observation. As a result, computer simulation is more pervasive today – and having more impact – than at any other time in human history. Many critical technologies, including those to develop new energy sources and to shift the cost-benefit factors in healthcare, are on the horizon that cannot be understood, developed, or utilized without simulation. A panel of experts reviewed and assessed the state of the art in SBE&S as well as levels of activity overseas in the broad thematic areas of life sciences and medicine, materials, and energy and sustainability; and in the crosscutting issues of next generation hardware and algorithms; software development; engineering simulations; validation, verification, and uncertainty quantification; multiscale modeling and simulation; and SBE&S education. The panel hosted a U.S. baseline workshop, conducted a bibliometric analysis, consulted numerous experts and reports, and visited 59 institutions and companies throughout East Asia and Western Europe to explore the active research projects in those institutions, the computational infrastructure used for the projects, the funding schemes that enable the research, the collaborative interactions among universities, national laboratories, and corporate research centers, and workforce needs and development for SBE&S.

Glotzer, S. C.; Kim, S.; Cummings, P. T.; Deshmukh, A.; Head-Gordon, M.; Karniadakis, G.; Petzold, L.; Sagui, C.; Shinozuka, M.

2013-07-30T23:59:59.000Z

307

Improving the diversity of manufacturing electroluminescent flat panel displays  

SciTech Connect (OSTI)

Crystalline calcium thiogallate with a cerium dopant has been deposited by metal-organic chemical vapor deposition (MOCVD) at temperatures below 600{degrees}C on a low cost glass substrate. An EL luminance of 1.05 fL was observed 40 volts above threshold at 60 Hz. This is more than an order of magnitude improvement over earlier crystalline-as-deposited thiogallate materials. These results pave the way for the use of MOCVD as a potential method for processing full color thin-film electroluminescent (TFEL) flat panel displays. The formation of the CaGa{sub 2}S{sub 4}:Ce phosphor requires precise control over a number of deposition parameters including flow rates, substrate temperature, and reactor pressure. The influence of these parameters will be discussed in terms of structure, uniformity, and TFEL device performance.

Moss, T.S.; Samuels, J.A.; Smith, D.C. [and others

1995-09-01T23:59:59.000Z

308

Enduring Nuclear Fuel Cycle, Proceedings of a panel discussion  

SciTech Connect (OSTI)

The panel reviewed the complete nuclear fuel cycle in the context of alternate energy resources, energy need projections, effects on the environment, susceptibility of nuclear materials to theft, diversion, and weapon proliferation. We also looked at ethical considerations of energy use, as well as waste, and its effects. The scope of the review extended to the end of the next century with due regard for world populations beyond that period. The intent was to take a long- range view and to project, not forecast, the future based on ethical rationales, and to avoid, as often happens, long-range discussions that quickly zoom in on only the next few decades. A specific nuclear fuel cycle technology that could satisfy these considerations was described and can be applied globally.

Walter, C. E., LLNL

1997-11-18T23:59:59.000Z

309

Lessons learned from the Three Mile Island Unit 2 Advisory Panel  

SciTech Connect (OSTI)

In response to public concern about the cleanup of the Three Mile Island, Unit 2 (TMI-2) facility after an accident on March 28, 1979 involving a loss of reactor coolant and subsequent damage to the reactor fuel, twelve citizens were asked to serve on an independent Advisory Panel to consult with the Nuclear Regulatory Commission (NRC) on the decontamination and cleanup of the facility. The panel met 78 times over a period of thirteen years, holding public meetings in the vicinity of TMI-2 and meeting regularly with NRC Commissioners in Washington, DC. This report describes the results of a project designed to identify and describe the lessons learned from the Advisory Panel and place those lessons in the context of what we generally know about citizen advisory groups. A summary of the empirical literature on citizen advisory panels is followed by a brief history of the TMI-2 Advisory Panel. The body of the report contains the analysis of the lessons learned, preliminary conclusions about the effectiveness of the Panel, and implications for the NRC in the use of advisory panels. Data for the report include meeting transcripts and interviews with past and present Panel participants.

Lach, D.; Bolton, P.; Durbin, N. [Battelle Seattle Research Center, WA (United States); Harty, R. [Pacific Northwest Lab., Richland, WA (United States)

1994-08-01T23:59:59.000Z

310

Building on a Decade of Accomplishments Report of the 2010 Blue Ribbon Panel on Genomics  

E-Print Network [OSTI]

Building on a Decade of Accomplishments Report of the 2010 Blue Ribbon Panel on Genomics Division of Microbiology and Infectious Diseases, Genomics Programs National Institute of Allergy and Infectious Diseases Blue Ribbon Panel on Genomics Division of Microbiology and Infectious Diseases, Genomics Programs

Levin, Judith G.

311

Propagating Uncertainty in Solar Panel Performance for Life Cycle Modeling in Early Stage Design  

E-Print Network [OSTI]

Propagating Uncertainty in Solar Panel Performance for Life Cycle Modeling in Early Stage Design. This work is conducted in the context of an amorphous photovoltaic (PV) panel, using data gathered from the National Solar Radiation Database, as well as realistic data collected from an experimental hardware setup

Yang, Maria

312

Effect of a Radiant Panel Cooling System on Indoor Air Quality of a Conditioned Space  

E-Print Network [OSTI]

This paper discusses the effect of a radiant cooling panel system on an indoor air quality (IAQ) of a conditioned space. In this study, ceiling radiant cooling panel, mechanical ventilation with fan coil unit (FCU) and 100% fresh air are used...

Mohamed, E.; Abdalla, K. N.

2010-01-01T23:59:59.000Z

313

Detailed design report for an operational phase panel-closure system  

SciTech Connect (OSTI)

Under contract to Westinghouse Electric Corporation (Westinghouse), Waste Isolation Division (WID), IT Corporation has prepared a detailed design of a panel-closure system for the Waste Isolation Pilot Plant (WIPP). Preparation of this detailed design of an operational-phase closure system is required to support a Resource Conservation and Recovery Act (RCRA) Part B permit application and a non-migration variance petition. This report describes the detailed design for a panel-closure system specific to the WIPP site. The recommended panel-closure system will adequately isolate the waste-emplacement panels for at least 35 years. This report provides detailed design and material engineering specifications for the construction, emplacement, and interface-grouting associated with a panel-closure system at the WIPP repository, which would ensure that an effective panel-closure system is in place for at least 35 years. The panel-closure system provides assurance that the limit for the migration of volatile organic compounds (VOC) will be met at the point of compliance, the WIPP site boundary. This assurance is obtained through the inherent flexibility of the panel-closure system.

NONE

1996-01-11T23:59:59.000Z

314

Evacuated Panels Utilizing Clay-Polymer Aerogel Composites for Improved Housing Insulation  

E-Print Network [OSTI]

Evacuated Panels Utilizing Clay-Polymer Aerogel Composites for Improved Housing Insulation March 17 encompasses a newly developed clay-polymer aerogel composite material (developed and patented by Dr. David Aerogel ~22 > 2,500 Silica Aerogel Blanket 10 1,800 (Aspen Aerogel) Silica Aerogel / PP Evacuated Panel 50

Rollins, Andrew M.

315

Deformation and fracture of impulsively loaded sandwich panels H.N.G. Wadley a,n  

E-Print Network [OSTI]

August 2012 Keywords: Blast loading Aluminum sandwich panels Friction stir welding HAZ Discrete particle fabricated by friction stir weld joining extruded sandwich panels with a triangular corrugated core. Micro-hardness and miniature tensile coupon testing revealed that friction stir welding reduced the strength and ductility

Wadley, Haydn

316

Deformation and Fracture of Impulsively Loaded Sandwich Panels H.N.G. Wadleya,*  

E-Print Network [OSTI]

alloy system fabricated by friction stir weld joining extruded sandwich panels with a triangular corrugated core. Micro-hardness and miniature tensile coupon testing revealed that friction stir welding system. #12;2 Keywords: Blast loading; Aluminum sandwich panels; Friction stir welding; HAZ; Discrete

Hutchinson, John W.

317

Diffractive optics for compact flat panel displays. Final report  

SciTech Connect (OSTI)

Three years ago LLNL developed a practical method to dramatically reduce the chromatic aberration in single element diffractive imaging lenses. High efficiency, achromatic imaging lenses have been fabricated for human vision correction. This LDRD supported research in applying our new methods to develop a unique, diffraction-based optical interface with solid state, microelectronic imaging devices. Advances in microelectronics have led to smaller, more efficient components for optical systems. There have, however, been no equivalent advances in the imaging optics associated with these devices. The goal of this project was to replace the bulky, refractive optics in typical head-mounted displays with micro-thin diffractive optics to directly image flat-panel displays into the eye. To visualize the system think of the lenses of someone`s eyeglasses becoming flat-panel displays. To realize this embodiment, we needed to solve the problems of large chromatic aberrations and low efficiency that are associated with diffraction. We have developed a graceful tradeoff between chromatic aberrations and the diffractive optic thickness. It turns out that by doubling the thickness of a micro-thin diffractive lens we obtain nearly a two-times improvement in chromatic performance. Since the human eye will tolerate one diopter of chromatic aberration, we are able to achieve an achromatic image with a diffractive lens that is only 20 microns thick, versus 3 mm thickness for the comparable refractive lens. Molds for the diffractive lenses are diamond turned with sub-micron accuracy; the final lenses are cast from these molds using various polymers. We thus retain both the micro- thin nature of the diffractive optics and the achromatic image quality of refractive optics. During the first year of funding we successfully extended our earlier technology from 1 cm diameter optics required for vision applications up to the 5 cm diameter optics required for this application. 3 refs., 6 figs.

Sweeney, D.; DeLong, K.

1997-04-29T23:59:59.000Z

318

Electrohydraulic Forming of Near-Net Shape Automotive Panels  

SciTech Connect (OSTI)

The objective of this project was to develop the electrohydraulic forming (EHF) process as a near-net shape automotive panel manufacturing technology that simultaneously reduces the energy embedded in vehicles and the energy consumed while producing automotive structures. Pulsed pressure is created via a shockwave generated by the discharge of high voltage capacitors through a pair of electrodes in a liquid-filled chamber. The shockwave in the liquid initiated by the expansion of the plasma channel formed between two electrodes propagates towards the blank and causes the blank to be deformed into a one-sided die cavity. The numerical model of the EHF process was validated experimentally and was successfully applied to the design of the electrode system and to a multi-electrode EHF chamber for full scale validation of the process. The numerical model was able to predict stresses in the dies during pulsed forming and was validated by the experimental study of the die insert failure mode for corner filling operations. The electrohydraulic forming process and its major subsystems, including durable electrodes, an EHF chamber, a water/air management system, a pulse generator and integrated process controls, were validated to be capable to operate in a fully automated, computer controlled mode for forming of a portion of a full-scale sheet metal component in laboratory conditions. Additionally, the novel processes of electrohydraulic trimming and electrohydraulic calibration were demonstrated at a reduced-scale component level. Furthermore, a hybrid process combining conventional stamping with EHF was demonstrated as a laboratory process for a full-scale automotive panel formed out of AHSS material. The economic feasibility of the developed EHF processes was defined by developing a cost model of the EHF process in comparison to the conventional stamping process.

Golovaschenko, Sergey F.

2013-09-26T23:59:59.000Z

319

PERFORMANCE OF RC AND FRC WALL PANELS REINFORCED WITH MILD STEEL AND GFRP COMPOSITES IN BLAST EVENTS  

SciTech Connect (OSTI)

The structural integrity of reinforced concrete structures in blast events is important for critical facilities. This paper presents experimental data generated for calibrating detailed finite element models that predict the performance of reinforced concrete wall panels with a wide range of construction details under blast loading. The test specimens were 1.2 m square wall panels constructed using Normal Weight Concrete (NWC) or Fiber Reinforced Concrete (FRC). FRC consists of macro-synthetic fibers dispersed in NWC. Five types of panels were tested: NWC panels with steel bar reinforcement (Type A); FRC panels without additional reinforcement (Type B); FRC panels with steel bar reinforcement (Type C); NWC panels with glass fiber reinforced polymer (GFRP) bar reinforcement (Type D); and NWC panels reinforced with steel bar reinforcement and external bidirectional GFRP overlays on both faces (Type E). An additional three Type C panels were used as control specimens (CON). Each panel type was constructed with three thicknesses: 152 mm, 254 mm, and 356 mm. The panels were instrumented with strain gauges, and accelerometers; in addition, pressure sensors and high speed videos were employed during the blast events. Panel types C and E had the best performance, whereas panel type B did not perform well. Preliminary dynamic simulations show crack patterns similar to the experimental results.

Timothy Garfield; William D. Richins; Thomas K. Larson; Chris P. Pantelides; James E. Blakeley

2011-06-01T23:59:59.000Z

320

Fabrication and development of several heat pipe honeycomb sandwich panel concepts. Final report  

SciTech Connect (OSTI)

The feasibility of fabricating and processing liquid metal heat pipes in a low mass honeycomb sandwich panel configuration for application on the NASA Langley airframe-integrated Scramjet engine was investigated. A variety of honeycomb panel facesheet and core-ribbon wick concepts was evaluated within constraints dictated by existing manufacturing technology and equipment. The chosen design consists of an all-stainless steel structure, sintered screen facesheets, and two types of core-ribbon, a diffusion bonded wire mesh and a foil-screen composite. Cleaning, fluid charging, processing, and process port sealing techniques were established. The liquid metals, potassium, sodium and cesium were used as working fluids. Eleven honeycomb panels 15.24 cm X 15.24 cm X 2.94 cm were delivered to NASA Langley for extensive performance testing and evaluation, nine panels were processed as heat pipes, and two panels were left unprocessed.

Tanzer, H.J.

1982-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Nondestructive evaluation and characterization of damage and repair to continuous-fiber ceramic composite panels.  

SciTech Connect (OSTI)

Continuous fiber ceramic matrix composites are currently being developed for a variety of high-temperature applications. Because of the high costs of making these components, minor damage incurred during manufacturing or operation must be rewired in order to extend the life of the components. In this study, five ceramic-grade Nicalon{trademark} fiber/SiNC-matrix composite panels were intentionally damaged with a pendulum-type impactor during an impact test. The damaged panels were then repaired at Dow Corning Corporation. Three nondestructive evaluation (NDE) methods were used to study the characteristics of the panels after the damage and again after the panels were repaired. The NDE methods were X-ray radiography, infrared thermal imaging, and air-coupled ultrasound. The results showed that the impact test induced various types of damage in the panels. The NDE data that were obtained by the three NDE methods were correlated with each other.

Sun, J. G.; Petrak, D. R.; Pillai, T. A. K.; Deemer, C.; Ellingson, W. A.

1998-04-01T23:59:59.000Z

322

Wildlife Management Areas (Florida)  

Broader source: Energy.gov [DOE]

Certain sites in Florida are designated as wildlife management areas, and construction and development is heavily restricted in these areas.

323

Large area, surface discharge pumped, vacuum ultraviolet light source  

DOE Patents [OSTI]

Large area, surface discharge pumped, vacuum ultraviolet (VUV) light source is disclosed. A contamination-free VUV light source having a 225 cm{sup 2} emission area in the 240-340 nm region of the electromagnetic spectrum with an average output power in this band of about 2 J/cm{sup 2} at a wall-plug efficiency of approximately 5% is described. Only ceramics and metal parts are employed in this surface discharge source. Because of the contamination-free, high photon energy and flux, and short pulse characteristics of the source, it is suitable for semiconductor and flat panel display material processing. 3 figs.

Sze, R.C.; Quigley, G.P.

1996-12-17T23:59:59.000Z

324

Broad area search for regions and objects of interest  

SciTech Connect (OSTI)

A quad chart provides an overview on the on-going project 'Broad Area Search for Regions and Objects of Interest' funded by the DOE Office of Nonproliferation and Verification Research and Development. Specifically, the quad chart shows: (1) Project title 'Broad Area Search for Regions and Objects of Interest'; (2) PI and Co-investigators; (3) Concept Panel outlining the project's approach built upon front-end scale-space image analysis; (4) Technical Challenges posed by the project, such as robustness, non-conformities, disparate spatial configuration and weak correlation between presence of objects of interest and low-level description of the surrounding geospatial background; and (5) Planned Accomplishment.

Skurikhin, Alexei N [Los Alamos National Laboratory; Pope, Paul A [Los Alamos National Laboratory

2011-01-12T23:59:59.000Z

325

Large area, surface discharge pumped, vacuum ultraviolet light source  

DOE Patents [OSTI]

Large area, surface discharge pumped, vacuum ultraviolet (VUV) light source. A contamination-free VUV light source having a 225 cm.sup.2 emission area in the 240-340 nm region of the electromagnetic spectrum with an average output power in this band of about 2 J/cm.sup.2 at a wall-plug efficiency of approximately 5% is described. Only ceramics and metal parts are employed in this surface discharge source. Because of the contamination-free, high photon energy and flux, and short pulse characteristics of the source, it is suitable for semiconductor and flat panel display material processing.

Sze, Robert C. (Santa Fe, NM); Quigley, Gerard P. (Los Alamos, NM)

1996-01-01T23:59:59.000Z

326

Proceedings of the Internoise 2012/ASME NCAD meeting August 19-22, 2012, New York City, NY, USA  

E-Print Network [OSTI]

involve flow separation inside the diverging section of the nozzle. Typical variable area nozzles found to this author. NOMENCLATURE Ae Nozzle exit area. At Nozzle throat area. AR Exit-to-throat area ratio, AR = Ae-D) nozzles. Conic C-D nozzles consist of two conic sections, one contracting and the other expanding, joined

Tinney, Charles E.

327

Hearn, Abu-Hejleh, McMullen, and Zornberg 1 MSE WALLS WITH INDEPENDENT FULL-HEIGHT FACING PANELS  

E-Print Network [OSTI]

without distress. Block facings and stacked panel facings are attractive, but some projects need full-height facing panels to create monolithic fronts not broken by horizontal joints. Lateral stresses acting

Zornberg, Jorge G.

328

CERN News - A major contract has been signed for the supply of solar panels derived from CERN technology  

E-Print Network [OSTI]

CERN News - A major contract has been signed for the supply of solar panels derived from CERN technology

CERN Video Productions; Marion Viguier

2012-01-01T23:59:59.000Z

329

Draft Memorandum to the Department on the Congressional Advisory Panel on the Governance of the Nuclear Security Enterprise  

Broader source: Energy.gov [DOE]

Draft Memorandum to the Department on the Congressional Advisory Panel on the Governance of the Nuclear Security Enterprise

330

UBC Social Ecological Economic Development Studies (SEEDS) Student Report An Investigation Into Solar Panel Options For The New SUB  

E-Print Network [OSTI]

Into Solar Panel Options For The New SUB Henry Lo, Miguel Antonio University of British Columbia APSC261 the current status of the subject matter of a project/report". #12;i AN INVESTIGATION INTO SOLAR PANEL that has been done on solar panels as a renewable energy source and the feasibility of using it in the new

331

Economic Mass Producible Mirror Panels for Solar Concentrators G Johnston, G. Burgess, K. Lovegrove and A. Luzzi  

E-Print Network [OSTI]

Economic Mass Producible Mirror Panels for Solar Concentrators G Johnston, G. Burgess, K. Lovegrove to the success of all solar concentrators of this nature are cost effective and durable mirror panel components World Solar Congress 743 #12;Economic Mass Producible Mirror Panels for Solar Concentrators Johnston

332

Real Time Selective Harmonic Minimization for Multilevel Inverters Connected to Solar Panels Using Artificial Neural Network Angle Generation  

E-Print Network [OSTI]

Real Time Selective Harmonic Minimization for Multilevel Inverters Connected to Solar Panels Using varying DC input sources. Five 195 W solar panels were used as the DC source for each full bridge cells or solar panels and will consequently bring a voltage unbalance depending on the system dynamics

Tolbert, Leon M.

333

EXPERT PANEL OVERSIGHT COMMITTEE ASSESSMENT OF FY2008 CORROSION AND STRESS CORROSION CRACKING SIMULANT TESTING PROGRAM  

SciTech Connect (OSTI)

The Expert Panel Oversight Committee (EPOC) has been overseeing the implementation of selected parts of Recommendation III of the final report, Expert Panel workshop for Hanford Site Double-Shell Tank Waste Chemistry Optimization, RPP-RPT-22126. Recommendation III provided four specific requirements necessary for Panel approval of a proposal to revise the chemistry control limits for the Double-Shell Tanks (DSTs). One of the more significant requirements was successful performance of an accelerated stress corrosion cracking (SCC) experimental program. This testing program has evaluated the optimization of the chemistry controls to prevent corrosion in the interstitial liquid and supernatant regions of the DSTs.

BOOMER KD

2009-01-08T23:59:59.000Z

334

Project DEEP STEAM: fourth meeting of the technical advisory panel, Albuquerque, NM, November 1980  

SciTech Connect (OSTI)

The Fourth Project DEEP STEAM Technical Advisory Panel Meeting was held on 5 and 6 November 1980 in Albuquerque, New Mexico, to review the status of project DEEP STEAM. This Proceedings, following the order of the meeting, is divided into five main sections: the injection string modification program, the downhole steam generator program, supporting activities, field testing, and the Advisory Panel recommendations and discussion. Each of the 17 presentations is summarized, and a final Discussion section has been added, when needed, for inclusion of comments and replies related to specific presentations. Finally, the Advisory Panel recommendations and the ensuing discussion are summarized in the closing section.

Fox, R.L.; Donaldson, A.B.; Eisenhawer, S.W.; Hart, C.M.; Johnson, D.R.; Mulac, A.J.; Wayland, J.R.; Weirick, L.J.

1981-07-01T23:59:59.000Z

335

Simple go/no-go test for subcritical damage in body armor panels  

SciTech Connect (OSTI)

The development of a simple test for subcritical damage in body armor panels using pressure-sensitive dye-indicator film has been performed and demonstrated effective. Measurements have shown that static indicator levels are accurately reproduced in dynamic loading events. Impacts from hard blunt impactors instrumented with an accelerometer and embedded force transducer were studied. Reliable correlations between the indicator film and instrumented impact force are shown for a range of impact energies. Force and acceleration waveforms with corresponding indicator film results are presented for impact events onto damaged and undamaged panels. We find that panel damage can occur at impact levels far below the National Institute of Justice acceptance test standard.

Fisher, Jason; Chimenti, D. E. [Center for NDE and Aerospace Engineering Department, Iowa State University, Ames, IA 50011 (United States)

2011-06-23T23:59:59.000Z

336

Minutes of the Tank Waste Science Panel meeting January 12--13, 1993  

SciTech Connect (OSTI)

The eight meeting of the Tank Waste Science Panel (Science Panel) was convened January 12, 1993 in Richland, Washington. A list of attendees at this meeting is provided in Appendix A. Appendix B is the agenda prepared for the meeting. It was not strictly followed. The meeting focused on the presentation and discussion of recent information and results obtained from studies conducted to understand flammable gas released and ferrocyanide content behavior in Hanford waste tanks. The Science Panel discussed work performed at Pacific Northwest Laboratoy PNL, Westinghouse Hanford Company, Florida State University, and Fauske Associates. A number of recommendations and observations were made.

Strachan, D.M. [comp.] [Pacific Northwest Lab., Richland, WA (United States); Schulz, W.W. [comp.] [Schulz (W.W.), Albuquerque, New Mexico (United States)

1993-10-01T23:59:59.000Z

337

Cone-Beam CT with Flat-Panel-Detector Digital Angiography System: Early Experience in Abdominal Interventional Procedures  

SciTech Connect (OSTI)

We developed a cone-beam computed tomography (CBCT) system equipped with a large flat-panel detector. Data obtained by 200{sup o} rotation imaging are reconstructed by means of CBCT to generate three-dimensional images. We report the use of CBCT angiography using CBCT in 10 patients with 8 liver malignancies and 2 hypersplenisms during abdominal interventional procedures. CBCT was very useful for interventional radiologists to confirm a perfusion area of the artery catheter wedged on CT by injection of contrast media through the catheter tip, although the image quality was slightly degraded, scoring as 2.60 on average by streak artifacts. CBCT is space-saving because it does not require a CT system with a gantry, and it is also time-saving because it does not require the transfer of patients.

Hirota, Shozo, E-mail: hirota-s@hyo-med.ac.jp; Nakao, Norio; Yamamoto, Satoshi; Kobayashi, Kaoru; Maeda, Hiroaki; Ishikura, Reiichi; Miura, Koui; Sakamoto, Kiyoshi [Hyogo College of Medicine, Department of Radiology (Japan); Ueda, Ken [Hitachi Medical Corporation, Research and Development Center (Japan); Baba, Rika [Hitachi Limited, Central Research Laboratory (Japan)

2006-12-15T23:59:59.000Z

338

Beyond Control Panels: Direct Manipulation for Visual Analytics  

SciTech Connect (OSTI)

Information Visualization strives to provide visual representations through which users can think about and gain insight into information. By leveraging the visual and cognitive systems of humans, complex relationships and phenomena occurring within datasets can be uncovered by exploring information visually. Interaction metaphors for such visualizations are designed to enable users direct control over the filters, queries, and other parameters controlling how the data is visually represented. Through the evolution of information visualization, more complex mathematical and data analytic models are being used to visualize relationships and patterns in data – creating the field of Visual Analytics. However, the expectations for how users interact with these visualizations has remained largely unchanged – focused primarily on the direct manipulation of parameters of the underlying mathematical models. In this article we present an opportunity to evolve the methodology for user interaction from the direct manipulation of parameters through visual control panels, to interactions designed specifically for visual analytic systems. Instead of focusing on traditional direct manipulation of mathematical parameters, the evolution of the field can be realized through direct manipulation within the visual representation – where users can not only gain insight, but also interact. This article describes future directions and research challenges that fundamentally change the meaning of direct manipulation with regards to visual analytics, advancing the Science of Interaction.

Endert, Alexander; Bradel, Lauren; North, Chris

2013-07-19T23:59:59.000Z

339

Please return completed form to: Siena College Health Service 515 Loudon Road, Loudonville, NY 12211 SIENA COLLEGE HEALTH RECORD  

E-Print Network [OSTI]

Seizure Disorder Thyroid Disorder Cancer Asthma Diabetes Pneumonia Sickle Cell/ Sickle Cell Trait Heart# ______________________________________________________________________________________________________________________________ (AREA CODE) HOME TEL. NUMBER (AREA CODE) CELL NUMBER ______________________________________________________________________________________________________________________________ If there was a campus emergency, who would you call? EMERGENCY CONTACT: NAME/RELATIONSHIP (AREA CODE) CELL NUMBER

340

SEI2: Wide Area Wireless Networks for Geophysics  

E-Print Network [OSTI]

parabolic. To antennas, solar panel, To sensor Line of radioBatteries and 40W solar panels •Field tests of acquisition

Paul Davis; Allen Husker; Igor Stubailo; Richard Guy; Sam Irvine; John Propst

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Injection repair of carbon fiber/bismaleimide composite panels with bisphenol E cyanate ester resin  

SciTech Connect (OSTI)

Resin injection of bisphenol E cyanate ester, a low viscosity resin that cures into a high temperature thermoset polymer, is investigated as a reliable repair method to restore strength and stiffness in delaminated carbon fiber/bismaleimide composites used in aircraft panels. The influence of temperature on the viscosity of the uncured resin was measured to optimize the injection conditions for high resin infiltration into the delaminations. The repair efficiency of the resin was evaluated by varying the panel thickness and the method by which the delamination damage was created in the composite specimens. Ultrasonic scanning (C-scan), flash thermography images, and cross-section analysis of repaired panels revealed excellent resin infiltration into the damaged region. Evaluation of mechanical repair efficiency using both bending stiffness and in-plain compressive strength of the composite panels as the repair metrics showed values exceeding 100%.

Thunga, Mahendra [Ames Laboratory; Bauer, Amy [Iowa State University; Obusek, Kristine [Fleet Readiness Center East; Meilunas, Ray [Naval Air Warfare Center Aircraft Division; Akinc, Mufit [Ames Laboratory; Kessler, Michael R [Ames Laboratory

2014-08-01T23:59:59.000Z

342

Mechanical behavior of sandwich panels with hollow AlSi tubes core construction Jian Xiong a  

E-Print Network [OSTI]

panels have been traditionally made of stochastic cores such as aluminum alloy foams [6,7] or micro. The Al­Si alloys are widely used in aerospace, marine, automotive and other engineering applications due

Vaziri, Ashkan

343

E-Print Network 3.0 - automobile user panel Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Search Powered by Explorit Topic List Advanced Search Sample search results for: automobile user panel Page: << < 1 2 3 4 5 > >> 1 I am told that, in the world of objets d'art,...

344

An investigation of preferences for product appearance : a case study of residential solar panels  

E-Print Network [OSTI]

The importance of the styling and appearance of consumer products is widely understood. This paper evaluates the appearance of a technology-oriented product, the residential solar panel, using a quantitative approach known ...

Bao, Qifang

2014-01-01T23:59:59.000Z

345

E-Print Network 3.0 - access panel surveys Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2008 Summary: and Ismaning from 26 to 30 May 2008 A. OPC meeting - Part 1 (26 May) B. Panel Sessions (272829 May) C. OPC... that the access to the GTC given to the ESO...

346

Tropical Moored Buoy Implementation Panel (TIP) Report Michael J. McPhaden, TIP Chairman  

E-Print Network [OSTI]

CLIVAR and IOC/WMO panels) to advance the implementation of a moored buoy network in the context of other), which advises the Administrator of NOAA on management and policy issues, has requested submission

347

Comments of the PRA Senior Review Panel on the meeting held December 1--3, 1987  

SciTech Connect (OSTI)

This memorandum records the minutes of the PRA Senior Review Panel meeting held at Savannah River Laboratory (SRL) on December 1--3, 1987, and the report on that meeting written subsequently by the panel members. The minutes are contained as Attachment 2 of this memorandum, and the report as Attachment 1. The Panel indicated two principal concerns in their report: (1) that insufficient emphasis is being placed on the reliability data development program, and (2) that excessive detail is being built into the fault trees. These concerns have been addressed in a subsequent meeting with the Panel, held March 2--4, 1988. In addition, the members have been provided with a program document (Reference 1) indicating the extent, the timing, and the limitations of the data analysis effort for the PRA.

Sharp, D.A.

1988-03-21T23:59:59.000Z

348

Design and implementation of a continuous improvement framework for an organic photovoltaic panels manufacturer  

E-Print Network [OSTI]

The MIT MEng Team worked at Konarka Technologies, the world leader organic photovoltaic panels (OPV) manufacturer, on several improvement projects. The concentration was on operations improvement as well as production ...

Colaci, Gregorio

2011-01-01T23:59:59.000Z

349

The ImmersaDesk3 -Experiences With A Flat Panel Display for Virtual Reality  

E-Print Network [OSTI]

crystal, #12;ferro-electric liquid crystal, plasma panel, and light emitting diode displays. In our, they are presently only available in developer kits. Light Emitting Diode displays are bright and potentially

Johnson, Andrew

350

A Joint Independent Scientific Review Panel and Independent Economic Analysis Board Review for the  

E-Print Network [OSTI]

A Joint Independent Scientific Review Panel and Independent Economic Analysis Board Review Richard N. Williams IEAB Independent Economic Analysis Board Roger Mann, Chair Noelwah R. Netusil, Vice ..................................................................................................... 8 2. Economic Content Review

351

Offsite Construction Comparative Study of Panelized and Modular Construction for Rio Mesa Facilities  

E-Print Network [OSTI]

Offsite Construction Comparative Study of Panelized and Modular Construction: This research is to evaluate the opportunities of prefabricated construction for remote the logistics of prefab construction on the Rio Mesa site, we hope that this project

Tipple, Brett

352

Agents, Believabilityand Embodiment in Advanced Learning Environments Introduction to a Panel Discussion  

E-Print Network [OSTI]

Agents, Believabilityand Embodiment in Advanced Learning Environments Introduction to a Panel to ediicatiorial or en- tertuinnierit systenis, iriterjiaces to professional environ- merits, etc., where cin the issues that underlie the introduction of embodied agents in learning environments. Embodied agents appear

Nijholt, Anton

353

New Technology Demonstration Program - Results of an Attempted Field Test of Multi-Layer Light Polarizing Panels in an Office Space  

SciTech Connect (OSTI)

An assessment of the potential energy savings associated with the use of multi-layer light polarizing panels in an office space was initiated as part of the Department of Energy's (DOE) Federal Energy Management Program (FEMP) New Technology Demonstration Program (NTDP) in 1997. This project was intended to provide information on the effectiveness and application of this technology that could help federal energy managers and other interested individuals determine whether this technology had benefits for their occupied spaces. The use of an actual working office area provided the capability of evaluating the technology's effectiveness in the real world.

Richman, Eric E.

2001-06-14T23:59:59.000Z

354

DELPHI expert panel evaluation of Hanford high level waste tank failure modes and release quantities  

SciTech Connect (OSTI)

The Failure Modes and Release Quantities of the Hanford High Level Waste Tanks due to postulated accident loads were established by a DELPHI Expert Panel consisting of both on-site and off-site experts in the field of Structure and Release. The Report presents the evaluation process, accident loads, tank structural failure conclusion reached by the panel during the two-day meeting.

Dunford, G.L.; Han, F.C.

1996-09-30T23:59:59.000Z

355

Hydrologically Sensitive Areas: Variable Source Area Hydrology  

E-Print Network [OSTI]

Hydrologically Sensitive Areas: Variable Source Area Hydrology Implications for Water Quality Risk hydrology was developed and applied to the New York City (NYC) water supply watersheds. According and are therefore hydrologically sensitive with respect to their potential to transport contaminants to perennial

Walter, M.Todd

356

Stability evaluation of the Panel 1 rooms and the E140 drift at WIPP  

SciTech Connect (OSTI)

WIPP, intended for underground permanent disposal of defense transuranic waste, is located 40 km east of Carlsbad at a depth of 655 m in the salt beds of the 600-m thick Permian Salado Formation. It will consist of 56 ``rooms`` each 91.5 m long, 10 m wide, and 4 m high, grouped in 8 ``panels`` of 7 rooms each. About 7.5 km of access drifts will also be provided. Excavation began in 1982 and surface/access/test facilities and one panel were completed by 1988, many years before it could be used. Current plans are to start emplacing waste in WIPP in 1998 and continue for 35 years. The north- south drift E140 is the widest (25 ft) of the four main north-south drifts and is the main north-south passage. Plans to conduct experiments with waste in 1993 were abandoned, and the plan now is to use panel 1 for permanent disposal of waste starting in 1998. The stability evaluation resulted in the conclusion that, while it would be possible to safely use portions of panel 1 for waste emplacement, it would be best to abandon panel 1 and mine a new panel after the decision has been made to use WIPP as a repository and the necessary permits obtained.

Maleki, H. [Maleki Technologies, Inc. (United States); Chaturvedi, L. [Environmental Evaluation Group, Albuquerque, NM (United States)

1996-08-01T23:59:59.000Z

357

AREA COORDINATOR RESIDENTIAL EDUCATION  

E-Print Network [OSTI]

AREA COORDINATOR RESIDENTIAL EDUCATION VANDERBILT UNIVERSITY, NASHVILLE, TENNESSEE The Office of Housing and Residential Education at Vanderbilt University is seeking applicants for an Area Coordinator. The Area Coordinator is responsible for assisting in the management and operation of a residential area

Bordenstein, Seth

358

NY Green Bank  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAXBalanced Scorecard Federal2 to:DieselEnergy Auditor NRELhilTon

359

Training Session: Buffalo, NY  

Broader source: Energy.gov [DOE]

This 3.5-hour training provides builders with a comprehensive review of zero energy-ready home construction including the business case, detailed specifications, and opportunities to be recognized...

360

ACIM-~ NY.49  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou areDowntown Site -MiamiYVE r 'Xxy";^it ! ( ,'

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

NY-%-3 P  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545 OCT 28 1% - :NEW

362

High-efficiency large-area CdTe panels. Final subcontract report, June 1987--July 1990  

SciTech Connect (OSTI)

The objective of this three year effort has been to develop an improved materials technology and fabrication process for limited volume production of 1 ft{sup 2} and 4 ft{sup 2} CdS/CdTe photovoltaic modules. The module stability objective by the end of this three year subcontract was to develop techniques to provide ten year life exploration with no greater than 10% degradation. In order to achieve these efficiency and stability objectives, the research program has been separated into tasks including: (1) analysis and characterization of CdS/CdTe Devices; (2) performance optimization on small cells; (3) encapsulation and stability testing; and (4) module efficiency optimization. 27 refs., 18 figs., 3 tabs.

Albright, S.P.; Chamberlin, R.R.; Jordan, J.F. [Photon Energy, Inc., El Paso, TX (USA)

1990-11-01T23:59:59.000Z

363

Jo Sexton, President, Cambridge Area Chamber of Commerce Panel 3 Public-Private Partnerships for Economic Growth and Workforce Development  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomentheATLANTA,Fermi NationalBusinessDepartmentatJeff Zients -Outliine for QER July

364

9.2. MANIPULATION PANELS 135 Figure 9.2: This panel allows the user to initialize the positions and sizes of objects in the virtual  

E-Print Network [OSTI]

with the physical and numerical parameters of the dynamic fish model. #12; 136 CHAPTER 9. THE GRAPHICAL USER INTERFACE Influencing a Fish's Behavior The animator can influence each fish's behavior at the motivation the behavior panel, the animator can also view the dynamics of the mental state of a chosen fish and its

Toronto, University of

365

9.2. MANIPULATION PANELS 135 Figure 9.2: This panel allows the user to initialize the positions and sizes of objects in the virtual  

E-Print Network [OSTI]

with the physical and numerical parameters of the dynamic fish model. #12;136 CHAPTER 9. THE GRAPHICAL USER INTERFACE Influencing a Fish's Behavior The animator can influence each fish's behavior at the motivation the behavior panel, the animator can also view the dynamics of the mental state of a chosen fish and its

Toronto, University of

366

Nuclear Materials Focus Area Fiscal Year 2002 Mid Year Review  

SciTech Connect (OSTI)

The Nuclear Materials Focus Area (NMFA) held its annual mid-year review on February 12 and 14, 2002, in Santa Fe, New Mexico. The purpose of this review was to examine both the technical aspects and the programmatic aspects of its technology development program. The focus area activities were reviewed by a panel consisting of personnel representing the end users of the technologies, and technical experts in nuclear materials. This year's review was somewhat different than in the past, as the stress was on how well the various projects being managed through the NMFA aligned with the two thrust areas and nine key goals and priorities recently issued by the Deputy Assistant Secretary for DOE's Office of Environmental Management (EM).

Thiel, E.C.; Fuhrman, P.W.

2002-05-30T23:59:59.000Z

367

Nuclear Materials Focus Area Fiscal Year 2002 Mid Year Review  

SciTech Connect (OSTI)

The Nuclear Materials Focus Area (NMFA) held its annual mid-year review on February 12 and 14, 2002, in Santa Fe, New Mexico. The purpose of this review was to examine both the technical aspects and the programmatic aspects of its technology development program. The focus area activities were reviewed by a panel consisting of personnel representing the end users of the technologies, and technical experts in nuclear materials. This year's review was somewhat different than in the past, as the stress was on how well the various projects being managed through the NMFA aligned with the two thrust areas and nine key goals and priorities recently issued by the Deputy Assistant Secretary for DOE's Office of Environmental Management (EM).

Thiel, Elizabeth Chilcote

2002-05-01T23:59:59.000Z

368

Geothermal br Resource br Area Geothermal br Resource br Area...  

Open Energy Info (EERE)

Basalt K Eburru Geothermal Area Eburru Geothermal Area East African Rift System Kenya Rift Basalt Fukushima Geothermal Area Fukushima Geothermal Area Northeast Honshu Arc...

369

Proceedings: panel on information dissemination for wind energy  

SciTech Connect (OSTI)

This meeting was called as part of a multi-year planning effort. Groups involved in the production and/or dissemination of information on wind energy were invited to describe their current activities and their perceptions of the needs of the 80's in this area. Participants exchanged copies of materials they distribute regularly and discussed frequently asked questions.

Weis, P. [ed.

1980-04-01T23:59:59.000Z

370

Original Article NTP-CERHR Expert Panel Report on the  

E-Print Network [OSTI]

10, 2010 (Meeting materials are available at http://ntp.niehs.nih.gov/go/9741.). The BSC voted materials are available at http://cerhr.niehs.nih.gov/evals/index.html. Reports can be obtained from the web, tmax, t1/2, area under the plasma concentration-time curve [AUC]) are similar for genistein

Omiecinski, Curtis

371

METROPOLITAN STATISTICAL AREA  

E-Print Network [OSTI]

METROPOLITAN STATISTICAL AREA OUTLOOK MORGANTOWN COLLEGE OF BUSINESS AND ECONOMICS Bureau to be repeated over the next five years. The Morgantown Metropolitan Statistical Area (MSA) had an average annual

Mohaghegh, Shahab

372

Wetland Preservation Areas (Minnesota)  

Broader source: Energy.gov [DOE]

A wetland owner can apply to the host county for designation of a wetland preservation area. Once designated, the area remains designated until the owner initiates expiration, except where a state...

373

Wildlife Management Areas (Maryland)  

Broader source: Energy.gov [DOE]

Wildlife Management Areas exist in the State of Maryland as wildlife sanctuaries, and vehicles, tree removal, and construction are severely restricted in these areas. Some of these species are also...

374

Protected Areas Stacy Philpott  

E-Print Network [OSTI]

· Convention of Biological Diversity, 1992 #12;IUCN Protected Area Management Categories Ia. Strict Nature. Protected Landscape/ Seascape VI. Managed Resource Protected Area #12;Ia. Strict Nature Preserves and Ib. Wilderness Areas · Natural preservation · Research · No · No #12;II. National Parks · Ecosystem protection

Gottgens, Hans

375

Effects of gaps in adhesives that bond elastically deformed panels to parabolic, cylindrical substructures  

SciTech Connect (OSTI)

In previous studies of the mechanical behavior of line focusing solar collectors, the reflective surface panel was modeled as a thin, initially flat, elastic plate that underwent large displacements to attain the shape of a prescribed parabolic cylinder. Attention was focused upon the stresses that developed in an adhesive layer which bonded the deformed panel to a rigid, parabolic substructure. Among the myriad possible collector designs, some possess longitudinally oriented, hollow ribs or corrugations in the substructure which interrupt the transverse continuity of the bond line between the deformed panel and the substructure. Thus, finite gaps in the adhesive are present which create regions where the panel surface becomes intermittently supported. The presence of these gaps perturbs the otherwise smooth distribution of adhesive contact stresses and it is the analytical modeling of this behavior that is the subject of the present report. In particular, attention is devoted to gaps which overlap with the edge effect zone - a region near the rim or vertex of the deformed panel where, in the absence of uniform edge loads necessary to maintain a true parabolic shape, high stresses and associated deformations occur. Significant influences of the gap size and position in the edge effect zone are demonstrated and discussed.

Wilson, R.K.; Reuter, R.C. Jr.

1982-03-01T23:59:59.000Z

376

362 Riverside Drive, Apt# 2D2, New York, NY 10025 917-868-6099 ys2729@columbia.edu  

E-Print Network [OSTI]

related with water in China and proposed a method of harvesting rainwater in urban area Made calculations of an integrated method for urban rainwater harvesting in China Ningbo, PRC October 2012 Analyzed current problems

377

Research needs for material mixing at extremes: panel outbriefs Santa Fe NM, January 9-12, 2011  

SciTech Connect (OSTI)

This document provides the panel outbrief slides from the second day of the workshop. The attendee list, who helped author these slides is provided.

Andrews, Malcolm John [Los Alamos National Laboratory

2011-01-21T23:59:59.000Z

378

Energy, cost, and CO 2 emission comparison between radiant wall panel systems and radiator systems  

E-Print Network [OSTI]

The main goal of this paper is to evaluate the possibility of application or replacement of radiators with low-temperature radiant panels. This paper shows the comparison results of operations of 4 space heating systems: the low-temperature radiant panel system without any additional thermal insulation of external walls (PH-WOI), the low-temperature radiant panel system with additional thermal insulation of external walls (PH-WI), the radiator system without any additional thermal insulation of external walls (the classical heating system) (RH-WOI), and the radiator system with additional thermal insulation of external walls (RH-WI). The operation of each system is simulated by software EnergyPlus. The investigation shows that the PH-WI gives the best results. The RH-WOI has the largest energy consumption, and the largest pollutant emission. However, the PH-WI requires the highest investment.

Milorad Boji?; Dragan Cvetkovi?; Marko Mileti?; Jovan Maleševi?; Harry Boyer

2012-12-18T23:59:59.000Z

379

Energy, cost, and CO 2 emission comparison between radiant wall panel systems and radiator systems  

E-Print Network [OSTI]

The main goal of this paper is to evaluate the possibility of application or replacement of radiators with low-temperature radiant panels. This paper shows the comparison results of operations of 4 space heating systems: the low-temperature radiant panel system without any additional thermal insulation of external walls (PH-WOI), the low-temperature radiant panel system with additional thermal insulation of external walls (PH-WI), the radiator system without any additional thermal insulation of external walls (the classical heating system) (RH-WOI), and the radiator system with additional thermal insulation of external walls (RH-WI). The operation of each system is simulated by software EnergyPlus. The investigation shows that the PH-WI gives the best results. The RH-WOI has the largest energy consumption, and the largest pollutant emission. However, the PH-WI requires the highest investment.

Boji?, Milorad; Mileti?, Marko; Maleševi?, Jovan; Boyer, Harry

2012-01-01T23:59:59.000Z

380

Simulation studies of bus electrode effect on discharge and luminous characteristics of plasma display panels  

SciTech Connect (OSTI)

We have investigated how bus electrodes affect discharge and luminous characteristics of a discharge cell. Three-dimensional simulations have been performed in a coplanar structured alternating current plasma display panel cell, with phosphor saturation effect taken into account. There exists the optimal position of bus electrodes for high luminance and luminous efficiency. Considering bus electrode thickness, we have found that in-bus structure is a promising candidate for high luminance, high luminous efficiency, and fast operation plasma display panels. Our simulation results would be very useful to understand the influence of bus electrode on characteristics of a plasma display panel cell, and would also provide a general guidance to improve its display performances.

Lee, Insook; Choi, K.Y. [Digital Display Research Laboratory, LG Electronics Inc., 16 Woomyeon-Dong, Seocho-Gu, Seoul 137-724 (Korea, Republic of)

2005-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Plasma Panel Detectors for MIP Detection for the SLHC and a Test Chamber Design  

E-Print Network [OSTI]

Performance demands for high and super-high luminosity at the LHC (up to 10^35 cm^(-2) sec^(-1) after the 2017 shutdown) and at future colliders demand high resolution tracking detectors with very fast time response and excellent temporal and spatial resolution. We are investigating a new radiation detector technology based on Plasma Display Panels (PDP), the underlying engine of panel plasma television displays. The design and production of PDPs is supported by four decades of industrial development. Emerging from this television technology is the Plasma Panel Sensor (PPS), a novel variant of the micropattern radiation detector. The PPS is fundamentally an array of micro-Geiger plasma discharge cells operating in a non-ageing, hermetically sealed gas mixture . We report on the PPS development program, including design of a PPS Test Cell.

Robert Ball; John W. Chapman; Erez Etzion; Peter S. Friedman; Daniel S. Levin; Meny Ben Moshe; Curtis Weaverdyck; Bing Zhou

2010-07-03T23:59:59.000Z

382

Design, construction, and testing of the direct absorption receiver panel research experiment  

SciTech Connect (OSTI)

A panel research experiment (PRE) was designed, built, and tested as a scaled-down model of a direct absorption receiver (DAR). The PRE is a 3-MW{sub t}DAR experiment that will allow flow testing with molten nitrate salt and provide a test bed for DAR testing with actual solar heating. In a solar central receiver system DAR, the heat absorbing fluid (a blackened molten nitrate salt) flows in a thin film down a vertical panel (rather than through tubes as in conventional receiver designs) and absorbs the concentrated solar flux directly. The ability of the flowing salt film to absorb flux directly. The ability of the flowing salt film to absorb the incident solar flux depends on the panel design, hydraulic and thermal fluid flow characteristics, and fluid blackener properties. Testing of the PRE is being conducted to demonstrate the engineering feasibility of the DAR concept. The DAR concept is being investigated because it offers numerous potential performance and economic advantages for production of electricity when compared to other solar receiver designs. The PRE utilized a 1-m wide by 6-m long absorber panel. The salt flow tests are being used to investigate component performance, panel deformations, and fluid stability. Salt flow testing has demonstrated that all the DAR components work as designed and that there are fluid stability issues that need to be addressed. Future solar testing will include steady-state and transient experiments, thermal loss measurements, responses to severe flux and temperature gradients and determination of peak flux capability, and optimized operation. In this paper, we describe the design, construction, and some preliminary flow test results of the Panel Research Experiment. 11 refs., 8 figs., 2 tabs.

Chavez, J.M.; Rush, E.E.; Matthews, C.W.; Stomp, J.M.; Imboden, J.; Dunkin, S.

1990-01-01T23:59:59.000Z

383

2002 Marcel Dekker, Inc. All rights reserved. This material may not be used or reproduced in any form without the express written permission of Marcel Dekker, Inc. MARCEL DEKKER, INC. 270 MADISON AVENUE NEW YORK, NY 10016  

E-Print Network [OSTI]

­3). These moments are usually derived from a probability balance equation for the distribution of the neutron number©2002 Marcel Dekker, Inc. All rights reserved. This material may not be used or reproduced in any AVENUE · NEW YORK, NY 10016 A CLASS OF SEMI-LINEAR EVOLUTION EQUATIONS ARISING IN NEUTRON FLUCTUATIONS Z

Pázsit, Imre

384

The U.S. Department of Energy's Brookhaven National Laboratory P.O. Box 5000, Upton NY 11973 631 344-2345 www.bnl.gov National Synchrotron Light Source II  

E-Print Network [OSTI]

and harvest solar energy with high efficiency and low cost. Molecular Electronics NSLS-II will allowThe U.S. Department of Energy's Brookhaven National Laboratory · P.O. Box 5000, Upton NY 11973, giving researchers here a competitive advantage in numerous scientific fields that will benefit our

Ohta, Shigemi

385

Spatially-resolved EELS and EDS Analysis of HfOxNy Gate Dielectrics Deposited by MOCVD using [(C2H5)2N]4Hf with NO and O2  

E-Print Network [OSTI]

-resolved electron energy loss spectroscopy (EELS) and energy-dispersive spectrometry (EDS). HfOxNy gate dielectrics a replacement for SiO2 as the gate dielectric material. HfO2 is a promising candidate due to its high dielectric constant its stability on Si. However, crystallization temperatures of less than 500 °C and high impurity

Ng, Wai Tung

386

Office of Technology Transfer and Innovation Partnerships, PO Box 6000, Binghamton, NY, 13902-6000. Ph: (607) 777-5870. FORM TT-2 Revised 03/19/09 FORM TT -2  

E-Print Network [OSTI]

Office of Technology Transfer and Innovation Partnerships, PO Box 6000, Binghamton, NY, 13902-6000. Ph: (607) 777-5870. FORM TT-2 Revised 03/19/09 FORM TT - 2 Technology Transfer NEW TECHNOLOGY DISCLOSURE PLEASE SUBMIT COMPLETED FORM TO OFFICE OF TECHNOLOGY TRANSFER AND INNOVATIVE PARTNERSHIPS 1

Suzuki, Masatsugu

387

The U.S. Department of Energy's Brookhaven National Laboratory P.O. Box 5000, Upton NY 11973 631 344-2345 www.bnl.gov Basic Energy Sciences  

E-Print Network [OSTI]

, to modulate the properties of light and to regulate energy transfer at the nanoscale. In particular be particularly use- ful for the efficient harvesting and conver- sion of solar energy into other usable formsThe U.S. Department of Energy's Brookhaven National Laboratory · P.O. Box 5000, Upton NY 11973

388

Concentrating Solar Panels: Bringing the Highest Power and Lowest Cost to the Rooftop  

SciTech Connect (OSTI)

Soliant Energy is a venture-capital-backed startup focused on bringing advanced concentrating solar panels to market. Our fundamental innovation is that we are the first company to develop a racking solar concentrator specifically for commercial rooftop applications, resulting in the lowest LCOE for rooftop electricity generation. Today, the commercial rooftop segment is the largest and fastest-growing market in the solar industry. Our concentrating panels can make a major contribution to the SAI's objectives: reducing the cost of solar electricity and rapidly deploying capacity. Our commercialization focus was re-shaped in 2009, shifting from an emphasis solely on panel efficiency to LCOE. Since the inception of the SAI program, LCOE has become the de facto standard for comparing commercial photovoltaic systems. While estimation and prediction models still differ, the emergence of performance-based incentive (PBI) and feed-in tariff (FIT) systems, as well as power purchase agreement (PPA) financing structures make LCOE the natural metric for photovoltaic systems. Soliant Energy has designed and demonstrated lower-cost, higher-power solar panels that consists of 6 (500X) PV module assemblies utilizing multi-junction cells and an integrated two-axis tracker. In addition, we have designed and demonstrated a prototype 1000X panel assembly with 8. Cost reductions relative to conventional flat panel PV systems were realized by (1) reducing the amount of costly semiconductor material and (2) developing strategies and processes to reduce the manufacturing costs of the entire system. Performance gains against conventional benchmarks were realized with (1) two-axis tracking and (2) higher-efficiency multi-junction PV cells capable of operating at a solar concentration ratio of 1000X (1000 kW/m2). The program objectives are: (1) Develop a tracking/concentrating solar module that has the same geometric form factor as a conventional flat, roof mounted photovoltaic (PV) panel - the Soliant module will produce more power and cost less than conventional panels of the same size; (2) Target LCOE: $0.079/kWh in 2010; (3) Target efficiency - 26% in 2010 (22% for 2008 prototype, 24% for 2009 pilot); and (4) Target performance - equivalent to 650Wp in 2010 (490W for 2008 prototype, 540W for 2009 pilot).

Michael Deck; Rick Russell

2010-01-05T23:59:59.000Z

389

Response Surfaces for optimal weight of cracked composite panels: noise and accuracy  

E-Print Network [OSTI]

Two levels of fidelity are used for minimum weight design of a composite blade-stiffened panel subject to crack propagation constraints. The low fidelity approach makes use of an equivalent strain constraint calculated by a closed form solution for the stress intensity factor. The high fidelity approach uses the stress intensity factor directly as the constraint and computes it from the stress distribution around the crack. A number of panels were optimized by both approaches for different values of applied load, crack length, and blade height, and response surface approximations for optimal weight as function of these configuration variables were constructed. Computational cost, noise and accuracy for the results are compared.

Melih Papila; Raphael T. Haftka

390

Report of panel 1: The appropriate scope and mission of ITER  

SciTech Connect (OSTI)

This panel looked at the mission of ITER, and how the US should address the present plans, and considers a number of alternative plans to arrive at the eventual goals of ITER. The panel considered three major approaches which have been discussed on the international scale, and tries to present the strengths, weaknesses, and possible changes to these plans. It suggests that any of these plans can arrive at the eventual aim, but may involve differing risks and time commitments. All plans involve ITER design studies, development work on technologies which must be in place for ITER design to succeed, and testing of materials and components for application in the device.

Linford, R.K. (Los Alamos National Lab., NM (United States)); Weitzner, H.; Abdou, M.A.; Baldwin, D.E.; Berkner, K.H.; Berry, L.A.; Culler, F.L.; Dean, S.O.; DeFreece, D.A.; Gauster, W.B. (and others)

1992-12-01T23:59:59.000Z

391

Semiconductor-based, large-area, flexible, electronic devices on {110}<100> oriented substrates  

DOE Patents [OSTI]

Novel articles and methods to fabricate the same resulting in flexible, oriented, semiconductor-based, electronic devices on {110}<100> textured substrates are disclosed. Potential applications of resulting articles are in areas of photovoltaic devices, flat-panel displays, thermophotovoltaic devices, ferroelectric devices, light emitting diode devices, computer hard disc drive devices, magnetoresistance based devices, photoluminescence based devices, non-volatile memory devices, dielectric devices, thermoelectric devices and quantum dot laser devices.

Goyal, Amit

2014-08-05T23:59:59.000Z

392

AREA 5 RWMS CLOSURE  

National Nuclear Security Administration (NNSA)

TRU material in the trench because there is no groundwater pathway under foreseeable climate conditions. The Area 5 RWMS probabilistic PA model can be modified and used to...

393

Groundwater Management Areas (Texas)  

Broader source: Energy.gov [DOE]

This legislation authorizes the Texas Commission on Environmental Quality and the Texas Water Development Board to establish Groundwater Management Areas to provide for the conservation,...

394

Fatigue Life of Damaged Bridge Deck Panels Strengthened With Carbon Fiber Hongseob Oh, Jongsung Sim, and Christian Meyer  

E-Print Network [OSTI]

1 Fatigue Life of Damaged Bridge Deck Panels Strengthened With Carbon Fiber Sheets Hongseob Oh was applied to test panels, which were then reinforced with carbon fiber sheets (CFS) using two different for bridge decks, based on cumulative damage theory. Keywords: bridge deck slab, carbon fiber sheets, fatigue

Meyer, Christian

395

In Solis Pacem Dialogue between modern technology and nature is developed through celebrating solar panels and a styl-  

E-Print Network [OSTI]

with a discussion about technology and nature. A field of solar panels to produce economic revenue to consider technology and energy, a Solar Garden exists among the panels. In contrast, an Asian-inspired PondIn Solis Pacem Dialogue between modern technology and nature is developed through celebrating solar

Goodman, Robert M.

396

The University of Texas at Austin July 30, 2014 Communications Termination Blocks and Patch Panels 27 11 19-1  

E-Print Network [OSTI]

panel), cable and patch cords (be manufacturer and product specific). c) All product information shall and patch panels for copper twisted-pair and optical fiber cables. B. The product performance (e, guidelines or specifications. B. The following codes, as required by law 1. ANSI/NFPA-70, National Electrical

Dawson, Clint N.

397

Phenomena Identification and Ranking Technique (PIRT) Panel Meeting Summary Report  

SciTech Connect (OSTI)

Phenomena Identification and Ranking Technique (PIRT) is a systematic way of gathering information from experts on a specific subject and ranking the importance of the information. NRC, in collaboration with DOE and the working group, conducted the PIRT exercises to identify safety-relevant phenomena for NGNP, and to assess and rank the importance and knowledge base for each phenomenon. The overall objective was to provide NRC with an expert assessment of the safety-relevant NGNP phenomena, and an overall assessment of R and D needs for NGNP licensing. The PIRT process was applied to five major topical areas relevant to NGNP safety and licensing: (1) thermofluids and accident analysis (including neutronics), (2) fission product transport, (3) high temperature materials, (4) graphite, and (5) process heat for hydrogen cogeneration.

Mark Holbrook

2007-07-01T23:59:59.000Z

398

University of Washington Focus the Nation Panel: Climate Change Impacts on Indigenous Populations  

E-Print Network [OSTI]

biodiesel and solar energy), and they have revised their commercial dredging policy so that only vacuum that because of their dependence on local resources and a life-way that is adapted to the cold arctic climateUniversity of Washington Focus the Nation Panel: Climate Change Impacts on Indigenous Populations 1

Rigor, Ignatius G.

399

Software Reliability: To Use Or Not To Use? Panel Chair: Michael Lyu (Bellcore)  

E-Print Network [OSTI]

Software Reliability: To Use Or Not To Use? Panel Chair: Michael Lyu (Bellcore) Panelists: Skeptics and complicated in the modern society, the reliability of computer software becomes more important and critical. This trend has been signified by the fact that hardware components of a system become increas­ ingly reliable

Lyu, Michael R.

400

Robotic Tracking and Marking of Surface Shape Defects on Moving Automotive Panels  

E-Print Network [OSTI]

Robotic Tracking and Marking of Surface Shape Defects on Moving Automotive Panels Valentin Borsu defects for quality control in the automotive industry. In order to integrate a defects detection station. INTRODUCTION Quality control in the automotive industry is essential in order to ensure that the products meet

Payeur, Pierre

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

ECOLOGY AND BEHAVIOR Treating Panel Traps With a Fluoropolymer Enhances Their Efficiency  

E-Print Network [OSTI]

ECOLOGY AND BEHAVIOR Treating Panel Traps With a Fluoropolymer Enhances Their Efficiency to improve trap capture and retention, researchers have treated intercept traps with Rain-X, a polysiloxane that are deployed to capture cerambycid beetles, using untreated traps as controls. Fluon-treated traps captured

Hanks, Lawrence M.

402

Blue Ribbon Panel on Development of Wind Turbine Facilities in Coastal Waters  

E-Print Network [OSTI]

Executive Order, creating this Panel and charging it with "identifying and weighing the costs and benefits Jersey has actively encouraged the use of renewable energy including solar and wind power; and WHEREAS as the issues relevant to wind turbines in coastal waters and to New Jersey's energy future are complex

Firestone, Jeremy

403

The Federal manufactured home construction and safety standards -- implications for foam panel construction  

SciTech Connect (OSTI)

This report reviews the U.S. Department of Housing and Urban Development construction code for (HUD-code) manufactured homes, Part 3280: Manufactured Home Construction and Safety Standards (the HUD Code), to identify sections that might be relevant in determining if insulated foam core panels (or structural insulated panels, SIPs) meet the requirements of Part 3280 for use in manufactured home construction. The U.S. Department of Energy and other parties are interested in the use of SIPs in residential construction, including HUD-Code manufactured homes, because the foam panels can have a higher effective insulation value than standard stud-framed construction and use less dimensional lumber. Although SIPs have not been used in manufactured housing, they may be well suited to the factory production process used to manufacture HUD-Code homes and the fact that they require less virgin timber may reduce the effect of volatile and increasing timber prices. Part 3280 requirements for fire resistance, wind resistance, structural load strength, ventilation, transportation shock, and thermal protection are reviewed. A brief comparison is made between the HUD Code requirements and data collected from foam panel manufacturers. 8 refs.

Lee, A.D.; Schrock, D.W.; Flintoft, S.A.

1997-03-01T23:59:59.000Z

404

Price elasticity reconsidered: Panel estimation of an agricultural water demand function  

E-Print Network [OSTI]

Price elasticity reconsidered: Panel estimation of an agricultural water demand function Karina, this paper estimates the price elasticity of irrigation water demand. Price elasticity is decomposed into the direct effect of water management and the indirect effect of water price on choice of output

Sadoulet, Elisabeth

405

An efficient approximation for the vibro-acoustic response of a turbulent boundary layer excited panel  

E-Print Network [OSTI]

hal-01004463,version1-11Jun2014 Author manuscript, published in "Journal of Sound and Vibration 264, 4 and the acoustic pressure radiated when a thin elastic plate is immersed in a low Mach number flow of fluid. The mechanical properties of this panel are a Young's modulus E, a Pois- son coefficient and a mass per unit

Boyer, Edmond

406

Proceedings of the 4th UJNR Panel on Wind and Seismic Effects Workshop on Wind  

E-Print Network [OSTI]

Proceedings of the 4th UJNR Panel on Wind and Seismic Effects Workshop on Wind Engineering, July 20-21, Tsukuba, Tokyo Modeling and Simulation of Transient Wind Load Effects Ahsan Kareem1 , Kyle Butler2 , Dae Kwon3 ABSTRACT Notwithstanding the developments made in recent decades in wind effects on structures

Kareem, Ahsan

407

Development of lifetime test procedure for powder evacuated panel insulation. CRADA final report  

SciTech Connect (OSTI)

This CRADA is between Appliance Research Consortium (ARC) of the Association of Home Appliance Manufacturers (AHAM) and the Lockheed Martin Energy Research Corp. A Powder Evacuated Panel (PEP) is a "super" thermal insulation, having a thermal resistivity (R) substantially above that of existing insulation without the environmental problems of some insulations such as Chlorofluorocarbon (CFC) blown foam.

Wilkes, K E; Graves, R S; Childs, K W

1996-03-01T23:59:59.000Z

408

Utilization of Agricultural WasteUtilization of Agricultural Waste for Composite Panelsfor Composite Panels  

E-Print Network [OSTI]

Utilization of Agricultural WasteUtilization of Agricultural Waste for Composite Panelsfor Composite Panels Chung Y. HseChung Y. Hse Principal Wood ScientistPrincipal Wood Scientist USDA Forest State UniversityLouisiana State University 66thth Pacific Rim BioPacific Rim Bio--Based Composites

409

Journul of Fusion Energy. Yo/. 5. No. 2. 1986 Introduction to Panel Discussions  

E-Print Network [OSTI]

Journul of Fusion Energy. Yo/. 5. No. 2. 1986 -- Introduction to Panel Discussions Whither Fusion Research? Robert L. Hirsch' . An unnamed former fusion program director retired and felt he needed some friend appeared before the major monk for his annual two words, which were, " Room cold." The monk nodded

410

Methodology for uncertainty estimation in NUREG-1150 (Draft): Conclusions of a review panel  

SciTech Connect (OSTI)

A review has been undertaken by a panel of experts, of the methodology for estimation of uncertainty in severe accident risk resulting from accidents to nuclear power plants as presented in the Draft NUREG-1150 report. This report provides detailed dicussions and conclusions resulting from this review process.

Kouts, H.; Cornell, A.; Farmer, R.; Hanauer, S.; Rasmussen, N.

1987-12-01T23:59:59.000Z

411

Detection of Ionizing Radiation by Plasma-Panel Sensors: Cosmic Muons, Ion Beams, and Cancer Therapy  

SciTech Connect (OSTI)

The plasma panel sensor is an ionizing photon and particle radiation detector derived from PDP technology with high gain and nanosecond response. Experimental results in detecting cosmic ray muons and beta particles from radioactive sources are described along with applications including high energy and nuclear physics, homeland security and cancer therapeutics.

Friedman, Dr. Peter S. [Integrated Sensors, LLC; Ferretti, Claudio [University of Michigan; Ball, Robert [University of Michigan; Beene, James R [ORNL; Ben Moshe, M. [Tel Aviv University; Benhammou, Yan [Tel Aviv University; Chapman, J. Wehrley [University of Michigan; Levin, Daniel S. [University of Michigan; Silver, Yiftah [Tel Aviv University; Weaverdyck, Curtis [University of Michigan; Zhou, Bing [University of Michigan; Etzion, E [Tel Aviv University; Moshe, M. [Tel Aviv University; Bentefour, E [Ion Beam Applications

2012-01-01T23:59:59.000Z

412

"Probes to Saturn and Beyond" Panel Discussion Report IPPW-4, Friday, 30 June 2006  

E-Print Network [OSTI]

by Sushil K. Atreya Department of Atmospheric, Oceanic, and Space Sciences, University of Michigan, Ann 2006) Panel Members: Sushil Atreya (U. Michigan, Chair), Alessandro Atzei (ESTEC), Tibor Balint (JPL. Comparative planetology of the gas giants (Jupiter and Saturn) and the ice giants (Uranus and Neptune

Atreya, Sushil

413

Journal of Fusion Energy, VoL 4, Nos. 2/3, 1985 Panel Discussion  

E-Print Network [OSTI]

Office of Fusion Energy (OFE). One might take as a reasonable assumption that first generation fusionJournal of Fusion Energy, VoL 4, Nos. 2/3, 1985 Panel Discussion Technology Research energy program. Based on the new program plan, the parameters are a broad scientific and technology

Abdou, Mohamed

414

October 17 -NIH Grant Panel Review -Chaired by Dr. Allen Harmsen of Immunology and Infectious Diseases  

E-Print Network [OSTI]

October 17 - NIH Grant Panel Review - Chaired by Dr. Allen Harmsen and Infectious Diseases has served as a chartered member of the NIH-AOIC study section since 2008 and has participated in over 50 NIH grant review processes. As the PI of many successful NIH-funded research projects

Dyer, Bill

415

A Joint Independent Scientific Review Panel and Independent Economic Analysis Board Review for  

E-Print Network [OSTI]

A Joint Independent Scientific Review Panel and Independent Economic Analysis Board Review Project Reports: Final Completion Report, October 1993 to October 2005 (April 2006) and Economic Analysis Economic Analysis Board Noelwah R. Netusil, Chair Kenneth L. Casavant Susan S. Hanna Daniel D. Huppert Joel

416

Stress-wave velocity of wood-based panels: Effect of moisture,  

E-Print Network [OSTI]

for wood-based panel products. In the forest products industry, nondestructive evaluation (NDE) technology, Ross and Pellerin 1994). One NDE technique, which uses stress-wave propagation characteristics, has received considerable atten- tion. Stress-wave-based NDE techniques have been investi- gated extensively

417

Independent Scientific Review Panel for the Northwest Power and Conservation Council  

E-Print Network [OSTI]

Independent Scientific Review Panel for the Northwest Power and Conservation Council 851 SW 6th of Fish and Wildlife Resources, University of Idaho. Bruce Ward, Fisheries Scientist, formerly.C., Canada. Scientific Peer Review Group Members John Epifanio, Ph.D., Conservation Geneticist

418

Independent Scientific Review Panel for the Northwest Power and Conservation Council  

E-Print Network [OSTI]

#12;Independent Scientific Review Panel for the Northwest Power and Conservation Council 851 SW 6th, Ph.D., Professor of Fish and Wildlife Resources, University of Idaho. Bruce Ward, Fisheries Scientist Science at Simon Fraser University, Canada. Scientific Peer Review Group Members John Epifanio, Ph

419

An integrated pipeline for the development of novel panels of mapped microsatellite markers for Leishmania donovani  

E-Print Network [OSTI]

An integrated pipeline for the development of novel panels of mapped microsatellite markers incorporates a primer design pipeline that will design primers to amplify the selected loci. Using this pipeline 12 out of 17 primer sets designed against the L. infantum genome generated polymorphic PCR

Steve Kemp

420

Breakthroughs in Practical-Sized, High Quality OLED Light Panel Source  

Broader source: Energy.gov [DOE]

General Electric Global Research has achieved a major breakthrough, developing a fully functional 2 ft. x 2 ft. light panel that produces more than 1200 lumens of quality white light with an efficacy of 15 lumens per watt. This device offers 50% better energy performance than their previous device, breaking two world records.

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

ECPR General Conference, Potsdam, 10-12 September 2009 Panel: Rescaling Health Care Policy  

E-Print Network [OSTI]

of reform of their health care systems. These countries represent a new market opportunity for international's collapse, this point became significant on the health care reform agenda. A drastic reduction5th ECPR General Conference, Potsdam, 10-12 September 2009 Panel: Rescaling Health Care Policy

Boyer, Edmond

422

AASC Panel---FASR Summary Report 02/13/99 Summary of FASR Page 1  

E-Print Network [OSTI]

and release of magnetic energy . The solar atmosphere . Coronal heating . Structure of the quiet solar ejections, both off the limb and on the solar disk; . elucidation of possible causes of coronal heatingAASC Panel---FASR Summary Report 02/13/99 Summary of FASR Page 1 Summary of the Frequency

White, Stephen

423

Compression and impact testing of two-layer composite pyramidal-core sandwich panels  

E-Print Network [OSTI]

show that compared with glass fiber woven textile truss cores, two-layer carbon fiber composite are traditionally manufactured using metallic honeycombs or stochastic foams [5­7]. The emergence of manufacturing sequential buckling. They manufactured multi-layered glass fiber reinforced composite sandwich panels

Vaziri, Ashkan

424

In-Situ Testing and Performance Assessment of a Redesigned WIPP Panel Closure - 13192  

SciTech Connect (OSTI)

There are two primary regulatory requirements for Panel Closures at the Waste Isolation Pilot Plant (WIPP), the nation's only deep geologic repository for defense related Transuranic (TRU) and Mixed TRU waste. The Federal requirement is through 40 CFR 191 and 194, promulgated by the U.S. Environmental Protection Agency (EPA). The state requirement is regulated through the authority of the Secretary of the New Mexico Environment Department (NMED) under the New Mexico Hazardous Waste Act (HWA), New Mexico Statutes Annotated (NMSA) 1978, chap. 74-4-1 through 74-4-14, in accordance with the New Mexico Hazardous Waste Management Regulations (HWMR), 20.4.1 New Mexico Annotated Code (NMAC). The state regulations are implemented for the operational period of waste emplacement plus 30 years whereas the federal requirements are implemented from the operational period through 10,000 years. The 10,000 year federal requirement is related to the adequate representation of the panel closures in determining long-term performance of the repository. In Condition 1 of the Final Certification Rulemaking for 40 CFR Part 194, the EPA required a specific design for the panel closure system. The U.S. Department of Energy (DOE) Carlsbad Field Office (CBFO) has requested, through the Planned Change Request (PCR) process, that the EPA modify Condition 1 via its rulemaking process. The DOE has also requested, through the Permit Modification Request (PMR) process, that the NMED modify the approved panel closure system specified in Permit Attachment G1. The WIPP facility is carved out of a bedded salt formation 655 meters below the surface of southeast New Mexico. Condition 1 of the Final Certification Rulemaking specifies that the waste panels be closed using Option D which is a combination of a Salado mass concrete (SMC) monolith and an isolation/explosion block wall. The Option D design was also accepted as the panel closure of choice by the NMED. After twelve years of waste handling operations and a greater understanding of the waste and the behavior of the underground salt formation, the DOE has established a revised panel closure design. This revised design meets both the short-term NMED Permit requirements for the operational period, and also the Federal requirements for long-term repository performance. This new design is simpler, easier to construct and has less of an adverse impact on waste disposal operations than the originally approved Option D design. The Panel Closure Redesign is based on: (1) the results of in-situ constructability testing performed to determine run-of-mine salt reconsolidation parameters and how the characteristics of the bedded salt formation affect these parameters and, (2) the results of air flow analysis of the new design to determine that the limit for the migration of Volatile Organic Compounds (VOCs) will be met at the compliance point. Waste panel closures comprise a repository feature that has been represented in WIPP performance assessment (PA) since the original Compliance Certification Application of 1996. Panel closures are included in WIPP PA models principally because they are a part of the disposal system, not because they play a substantive role in inhibiting the release of radionuclides to the outside environment. The 1998 rulemaking that certified WIPP to receive transuranic waste placed conditions on the panel closure design to be implemented in the repository. The revised panel closure design, termed the Run-of-Mine (ROM) Panel Closure System (ROMPCS), is comprised of 30.48 meters of ROM salt with barriers at each end. The ROM salt is generated from ongoing mining operations at the WIPP and may be compacted and/or moistened as it is emplaced in a panel entry. The barriers consist of bulkheads, similar to those currently used in the panels as room closures. A WIPP performance assessment has been completed that incorporates the ROMPCS design into the representation of the repository, and compares repository performance to that achieved with the approved Option D design. Several key physical process

Klein, Thomas [URS-Professional Solutions, 4021 National Parks Highway Carlsbad, NM 88220 (United States)] [URS-Professional Solutions, 4021 National Parks Highway Carlsbad, NM 88220 (United States); Patterson, Russell [Department of Energy-Carlsbad Field Office, 4021 National Parks Highway Carlsbad, NM 88220 (United States)] [Department of Energy-Carlsbad Field Office, 4021 National Parks Highway Carlsbad, NM 88220 (United States); Camphouse, Chris; Herrick, Courtney; Kirchner, Thomas; Malama, Bwalya; Zeitler, Todd [Sandia National Laboratories-Carlsbad, 4100 National Parks Highway Carlsbad, NM 88220 (United States)] [Sandia National Laboratories-Carlsbad, 4100 National Parks Highway Carlsbad, NM 88220 (United States); Kicker, Dwayne [SM Stoller Corporation-Carlsbad, 4100 National Parks Highway Carlsbad, NM (United States)] [SM Stoller Corporation-Carlsbad, 4100 National Parks Highway Carlsbad, NM (United States)

2013-07-01T23:59:59.000Z

425

Brine and Gas Flow Patterns Between Excavated Areas and Disturbed Rock Zone in the 1996 Performance Assessment for the Waste Isolation Pilot Plant for a Single Drilling Intrusion that Penetrates Repository and Castile Brine Reservoir  

SciTech Connect (OSTI)

The Waste Isolation Pilot Plant (WIPP), which is located in southeastern New Mexico, is being developed for the geologic disposal of transuranic (TRU) waste by the U.S. Department of Energy (DOE). Waste disposal will take place in panels excavated in a bedded salt formation approximately 2000 ft (610 m) below the land surface. The BRAGFLO computer program which solves a system of nonlinear partial differential equations for two-phase flow, was used to investigate brine and gas flow patterns in the vicinity of the repository for the 1996 WIPP performance assessment (PA). The present study examines the implications of modeling assumptions used in conjunction with BRAGFLO in the 1996 WIPP PA that affect brine and gas flow patterns involving two waste regions in the repository (i.e., a single waste panel and the remaining nine waste panels), a disturbed rock zone (DRZ) that lies just above and below these two regions, and a borehole that penetrates the single waste panel and a brine pocket below this panel. The two waste regions are separated by a panel closure. The following insights were obtained from this study. First, the impediment to flow between the two waste regions provided by the panel closure model is reduced due to the permeable and areally extensive nature of the DRZ adopted in the 1996 WIPP PA, which results in the DRZ becoming an effective pathway for gas and brine movement around the panel closures and thus between the two waste regions. Brine and gas flow between the two waste regions via the DRZ causes pressures between the two to equilibrate rapidly, with the result that processes in the intruded waste panel are not isolated from the rest of the repository. Second, the connection between intruded and unintruded waste panels provided by the DRZ increases the time required for repository pressures to equilibrate with the overlying and/or underlying units subsequent to a drilling intrusion. Third, the large and areally extensive DRZ void volumes is a significant source of brine to the repository, which is consumed in the corrosion of iron and thus contributes to increased repository pressures. Fourth, the DRZ itself lowers repository pressures by providing storage for gas and access to additional gas storage in areas of the repository. Fifth, given the pathway that the DRZ provides for gas and brine to flow around the panel closures, isolation of the waste panels by the panel closures was not essential to compliance with the U.S. Environment Protection Agency's regulations in the 1996 WIPP PA.

ECONOMY,KATHLEEN M.; HELTON,JON CRAIG; VAUGHN,PALMER

1999-10-01T23:59:59.000Z

426

Decontamination & decommissioning focus area  

SciTech Connect (OSTI)

In January 1994, the US Department of Energy Office of Environmental Management (DOE EM) formally introduced its new approach to managing DOE`s environmental research and technology development activities. The goal of the new approach is to conduct research and development in critical areas of interest to DOE, utilizing the best talent in the Department and in the national science community. To facilitate this solutions-oriented approach, the Office of Science and Technology (EM-50, formerly the Office of Technology Development) formed five Focus AReas to stimulate the required basic research, development, and demonstration efforts to seek new, innovative cleanup methods. In February 1995, EM-50 selected the DOE Morgantown Energy Technology Center (METC) to lead implementation of one of these Focus Areas: the Decontamination and Decommissioning (D & D) Focus Area.

NONE

1996-08-01T23:59:59.000Z

427

Geographic Area Month  

U.S. Energy Information Administration (EIA) Indexed Site

Fuels by PAD District and State (Cents per Gallon Excluding Taxes) - Continued Geographic Area Month No. 1 Distillate No. 2 Distillate a No. 4 Fuel b Sales to End Users Sales for...

428

1Electricity from Sunlight: The Van Allen Probes Solar Panels NASA's twin Van Allen Probes spacecraft will be launched in 2012. The  

E-Print Network [OSTI]

1Electricity from Sunlight: The Van Allen Probes Solar Panels NASA's twin Van Allen Probes of the surrounding four solar panel `wings' that provide power to the spacecraft instruments. The small blue rectangles within each of the four solar panels show the location of the solar cells used to power

429

300 Area Disturbance Report  

SciTech Connect (OSTI)

The objective of this study was to define areas of previous disturbance in the 300 Area of the U.S. Department of Energy (DOE) Hanford Site to eliminate these areas from the cultural resource review process, reduce cultural resource monitoring costs, and allow cultural resource specialists to focus on areas where subsurface disturbance is minimal or nonexistent. Research into available sources suggests that impacts from excavations have been significant wherever the following construction activities have occurred: building basements and pits, waste ponds, burial grounds, trenches, installation of subsurface pipelines, power poles, water hydrants, and well construction. Beyond the areas just mentioned, substrates in the' 300 Area consist of a complex, multidimen- sional mosaic composed of undisturbed stratigraphy, backfill, and disturbed sediments; Four Geographic Information System (GIS) maps were created to display known areas of disturbance in the 300 Area. These maps contain information gleaned from a variety of sources, but the primary sources include the Hanford GIS database system, engineer drawings, and historic maps. In addition to these maps, several assumptions can be made about areas of disturbance in the 300 Area as a result of this study: o o Buried pipelines are not always located where they are mapped. As a result, cultural resource monitors or specialists should not depend on maps depicting subsurface pipelines for accurate locations of previous disturbance. Temporary roads built in the early 1940s were placed on layers of sand and gravel 8 to 12 in. thick. Given this information, it is likely that substrates beneath these early roads are only minimally disturbed. Building foundations ranged from concrete slabs no more than 6 to 8 in. thick to deeply excavated pits and basements. Buildings constructed with slab foundations are more numerous than may be expected, and minimally disturbed substrates may be expected in these locations. Historic black and white photographs provide a partial record of some excavations, including trenches, building basements, and material lay-down yards. Estimates of excavation depth and width can be made, but these estimates are not accurate enough to pinpoint the exact location where the disturbedhmdisturbed interface is located (e.g., camera angles were such that depths and/or widths of excavations could not be accurately determined or estimated). In spite of these limitations, these photographs provide essential information. Aerial and historic low-level photographs have captured what appears to be backfill throughout much of the eastern portion of the 300 Area-near the Columbia River shoreline. This layer of fill has likely afforded some protection for the natural landscape buried beneath the fill. This assumption fits nicely with the intermittent and inadvertent discoveries of hearths and stone tools documented through the years in this part of the 300 Area. Conversely, leveling of sand dunes appears to be substantial in the northwestern portion of the 300 Area during the early stages of development. o Project files and engineer drawings do not contain information on any impromptu but necessary adjustments made on the ground during project implementation-after the design phase. Further, many projects are planned and mapped but never implemented-this information is also not often placed in project files. Specific recommendations for a 300 Area cultural resource monitoring strategy are contained in the final section of this document. In general, it is recommended that monitoring continue for all projects located within 400 m of the Columbia River. The 400-m zone is culturally sensitive and likely retains some of the most intact buried substrates in the 300 Area.

LL Hale; MK Wright; NA Cadoret

1999-01-07T23:59:59.000Z

430

Does Preinterventional Flat-Panel Computer Tomography Pooled Blood Volume Mapping Predict Final Infarct Volume After Mechanical Thrombectomy in Acute Cerebral Artery Occlusion?  

SciTech Connect (OSTI)

PurposeDecreased cerebral blood volume is known to be a predictor for final infarct volume in acute cerebral artery occlusion. To evaluate the predictability of final infarct volume in patients with acute occlusion of the middle cerebral artery (MCA) or the distal internal carotid artery (ICA) and successful endovascular recanalization, pooled blood volume (PBV) was measured using flat-panel detector computed tomography (FPD CT).Materials and MethodsTwenty patients with acute unilateral occlusion of the MCA or distal ACI without demarcated infarction, as proven by CT at admission, and successful Thrombolysis in cerebral infarction score (TICI 2b or 3) endovascular thrombectomy were included. Cerebral PBV maps were acquired from each patient immediately before endovascular thrombectomy. Twenty-four hours after recanalization, each patient underwent multislice CT to visualize final infarct volume. Extent of the areas of decreased PBV was compared with the final infarct volume proven by follow-up CT the next day.ResultsIn 15 of 20 patients, areas of distinct PBV decrease corresponded to final infarct volume. In 5 patients, areas of decreased PBV overestimated final extension of ischemia probably due to inappropriate timing of data acquisition and misery perfusion.ConclusionPBV mapping using FPD CT is a promising tool to predict areas of irrecoverable brain parenchyma in acute thromboembolic stroke. Further validation is necessary before routine use for decision making for interventional thrombectomy.

Wagner, Marlies, E-mail: marlies.wagner@kgu.de [Hospital of Goethe University, Institute of Neuroradiology (Germany); Kyriakou, Yiannis, E-mail: yiannis.kyriakou@siemens.com [Siemens AG, Health Care Sector (Germany); Mesnil de Rochemont, Richard du, E-mail: mesnil@em.uni-frankfurt.de [Hospital of Goethe University, Institute of Neuroradiology (Germany); Singer, Oliver C., E-mail: o.singer@em.uni-frankfurt.de [Hospital of Goethe University, Department of Neurology (Germany); Berkefeld, Joachim, E-mail: berkefeld@em.uni-frankfurt.de [Hospital of Goethe University, Institute of Neuroradiology (Germany)

2013-08-01T23:59:59.000Z

431

RC structures strengthened by metal shear panels: experimental and numerical analysis  

SciTech Connect (OSTI)

Metal shear panels (MSPs) may be effectively used as a lateral load resisting system for framed structures. In the present paper, such a technique is applied for the seismic protection of existing RC buildings, by setting up a specific design procedure, which has been developed on the basis of preliminary full-scale experimental tests. The obtained results allowed the development of both simplified and advanced numerical models of both the upgraded structure and the applied shear panels. Also, the proposed design methodology, which is framed in the performance base design philosophy, has been implemented for the structural upgrading of a real Greek existing multi-storey RC building. The results of the numerical analysis confirmed the effectiveness of the proposed technique, also emphasising the efficiency of the implemented design methodology.

De Matteis, G. [Dept. of Design, Rehabilitation and Control of Architectural Structures, University of Chieti-Pescara 'G. D'Annunzio', V.le Pindaro, 42-65127 Pescara (Italy); Formisano, A.; Mazzolani, F. M. [Dept. of Structural Engineering University of Naples 'Federico II', P.le Tecchio, 80-80125 Naples (Italy)

2008-07-08T23:59:59.000Z

432

Flat panel display using Ti-Cr-Al-O thin film  

DOE Patents [OSTI]

Thin films of Ti--Cr--Al--O are used as a resistor material. The films are rf sputter deposited from ceramic targets using a reactive working gas mixture of Ar and O.sub.2. Resistivity values from 10.sup.4 to 10.sup.10 Ohm-cm have been measured for Ti--Cr--Al--O film <1 .mu.m thick. The film resistivity can be discretely selected through control of the target composition and the deposition parameters. The application of Ti--Cr--Al--O as a thin film resistor has been found to be thermodynamically stable, unlike other metal-oxide films. The Ti--Cr--Al--O film can be used as a vertical or lateral resistor, for example, as a layer beneath a field emission cathode in a flat panel display; or used to control surface emissivity, for example, as a coating on an insulating material such as vertical wall supports in flat panel displays.

Jankowski, Alan F. (Livermore, CA); Schmid, Anthony P. (Solan Beach, CA)

2002-01-01T23:59:59.000Z

433

Project DEEP STEAM: third meeting of the technical advisory panel, Bakersfield, CA, March 1980  

SciTech Connect (OSTI)

The third meeting of the technical advisory panel for the Deep Steam project was held in March 1980 in Bakersfield, California. The following seven papers were presented: Materials Studies; Insulation/Packer Simulation Test; Enhanced Recovery Packer; High Pressure Downhole Steam Generator; Lower Pressure Downhole Steam Generator; Physical Simulations; and Field Testing. The panel made many recommendations, some of which are: shell calcium silicate insulation should be included in the injection string modification program; for metal packer, consider age hardening alloys, testing with thermal cycling, intentionally flawed casing, and operational temperatures effect on differential expansion, plus long term tests under temperature and corrosive environment; for minimum stress packer, consider testing environment carefully as some elastomers are especially susceptible to oil, oxygen, and combustion gases; for downhole steam generator, quality of water required with new low pressure combustion design needs to be investigated; in field testing, materials coupons, for corrosion monitoring, should be an integral part of field test operations.

Fox, R. L.; Johnson, D. R.; Donaldson, A. B.; Mulac, A. J.; Krueger, D. A.

1981-04-01T23:59:59.000Z

434

MEASUREMENT OF BUILDING AREAS MEASUREMENT OF BUILDING AREAS  

E-Print Network [OSTI]

) Common Use Areas All floored areas in the building for circulation and standard facilities provided and the like. These are extracts of NWPC standard method of measurement of building areas with an addition fromSection S ANNEXURE 4 MEASUREMENT OF BUILDING AREAS MEASUREMENT OF BUILDING AREAS 1. GROSS BUILDING

Wang, Yan

435

Findings of the Peer Review Panel on the Draft Reactor Risk Reference Document, NUREG-1150  

SciTech Connect (OSTI)

This report contains the finding of the /open quotes/NUREG-1150 Peer Review Panel/close quotes/ on the methodology and results presented in the Draft Reactor Risk Reference Study (NUREG-1150) and supporting documentation. The report consists of two principal parts: the chairman's report, which summarizes the principal issues of the review, and the individual members' reports, which supply the individual findings and technical details of the fourteen reviewers.

Kastenberg, W.E.; Apostolakis, G.; Bickel, J.H.; Blond, R.M.; Board, S.J.; Epstein, M.; Hofmann, P.; King, F.K.; Ostrach, S.; Reed, J.W.

1988-05-01T23:59:59.000Z

436

Study of the Applications of the Radiant Cooling Panel in Museum Showcases  

E-Print Network [OSTI]

huabohou@163.com xiongfengwan@gmail.com hxchen@mail.csu.edu.cn Abstract: The radiant cooling panel was proposed to control the temperature in the showcases to supply a steadier environment for cultural relic preservation. The new showcase... Master Master Professor Institute of Energy and Power, Huazhong University of Science and Technology School of Energy Science and Engineering, Central South University Wuhan P. R. China, 430074 Changsha P. R. China, 410083 yulikui@sina.com...

Yu, L.; Hou, H.; Wan, X.; Chen, H.

2006-01-01T23:59:59.000Z

437

Structural design and analysis of a lightweight composite sandwich space radiator panel  

E-Print Network [OSTI]

Model???????????????????.31 3.5.1 Cutout??...????????????????????32 3.5.2 Antenna????????????...?????????..32 3.6 Preliminary Design????????????????????...33 IV. VIBRATION AND THERMAL CHARACTERISTICS OF SANDWICH RADIATOR PANEL....??..??????????????..35 4.1 Plate Theory???????????????????????..35 4.2 Free Vibration of a Simply Supported Rectangular Plate?????....36 4.3 Parametric Study of Simply Supported Plates and Sandwiches.???..38 4.3.1 Aluminum 2024-T3 Isotropic Plate???????????..38...

Mukundan, Sudharsan

2005-02-17T23:59:59.000Z

438

Structural insulated panels produced from recycled Expanded-Polystrene (EPS) foam scrap. Final report  

SciTech Connect (OSTI)

This report documents a research project undertaken to assess the feasibility of using scrap reground expanded polystyrene (EPS) in the manufacture of structural insulated panels (SIPs) in order to save material costs and reduce the amount of EPS waste products to be disposed. The project team, managed by Steven Winter Associates, Inc., a Norwalk, Connecticut-based building systems research and consulting firm included: Thermal Foams, Inc., a Buffalo-based manufacturer of EPS products; BASF Corp., the world`s largest producer of EPS beads; Oak Ridge National Laboratory, which performed thermal tests (ASTM C-518); RADCO, Inc. which performed material properties tests: density (ASTM C-303), flexural strength (ASTM C-203), tensile strength (ASTM D-1623), and transverse load test of SIPs panels (ASTM E-72). The report documents the manufacturing and testing process and concludes that there was relatively little difference in the thermal and structural characteristics under normal loading conditions of the panels tested with varying amount of regrind (from 10% - 25%) and those made with 100% virgin beads. The report recommends that additional tests be undertaken, but suggests that, based on the test results, reground EPS can be successfully used in the cores of SIPs in amounts up to 25%.

Grinnell, A.

1996-11-01T23:59:59.000Z

439

Subsurface contaminants focus area  

SciTech Connect (OSTI)

The US Department of Enregy (DOE) Subsurface Contaminants Focus Area is developing technologies to address environmental problems associated with hazardous and radioactive contaminants in soil and groundwater that exist throughout the DOE complex, including radionuclides, heavy metals; and dense non-aqueous phase liquids (DNAPLs). More than 5,700 known DOE groundwater plumes have contaminated over 600 billion gallons of water and 200 million cubic meters of soil. Migration of these plumes threatens local and regional water sources, and in some cases has already adversely impacted off-site rsources. In addition, the Subsurface Contaminants Focus Area is responsible for supplying technologies for the remediation of numerous landfills at DOE facilities. These landfills are estimated to contain over 3 million cubic meters of radioactive and hazardous buried Technology developed within this specialty area will provide efective methods to contain contaminant plumes and new or alternative technologies for development of in situ technologies to minimize waste disposal costs and potential worker exposure by treating plumes in place. While addressing contaminant plumes emanating from DOE landfills, the Subsurface Contaminants Focus Area is also working to develop new or alternative technologies for the in situ stabilization, and nonintrusive characterization of these disposal sites.

NONE

1996-08-01T23:59:59.000Z

440

MSL ENTERANCE REFERENCE AREA  

E-Print Network [OSTI]

MSL ENTERANCE LOBBY ELEV STAIRS SSL-019 REFERENCE AREA SSL-021 GROUP STUDY SSL-018 STUDY ROOM SSL-029 SSL-020 COPY ROOM SSL-022 GROUP STUDY SSL-026 STACKS SSL-023 GROUP STUDY SSL-024 GROUP STUDY SSL TBL-014 TBL-014A STAIRS SSL-007 GIS/ WORKROOM SSL-011 SSL-008 SSL-009 SSL-010 SSL-014 SSL-017 STAIRS

Aalberts, Daniel P.

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Plutonium focus area  

SciTech Connect (OSTI)

To ensure research and development programs focus on the most pressing environmental restoration and waste management problems at the U.S. Department of Energy (DOE), the Assistant Secretary for the Office of Environmental Management (EM) established a working group in August 1993 to implement a new approach to research and technology development. As part of this new approach, EM developed a management structure and principles that led to the creation of specific Focus Areas. These organizations were designed to focus the scientific and technical talent throughout DOE and the national scientific community on the major environmental restoration and waste management problems facing DOE. The Focus Area approach provides the framework for intersite cooperation and leveraging of resources on common problems. After the original establishment of five major Focus Areas within the Office of Technology Development (EM-50, now called the Office of Science and Technology), the Nuclear Materials Stabilization Task Group (EM-66) followed the structure already in place in EM-50 and chartered the Plutonium Focus Area (PFA). The following information outlines the scope and mission of the EM, EM-60, and EM-66 organizations as related to the PFA organizational structure.

NONE

1996-08-01T23:59:59.000Z

442

Traffic-related air pollution exposures and changes in heart rate variability in Mexico City: A panel study  

E-Print Network [OSTI]

Abstract Background While air pollution exposures have been linked to cardiovascular outcomes, the contribution from acute gas and particle traffic-related pollutants remains unclear. Using a panel study design with repeated ...

Shields, Kyra Naumoff

443

A comparison of workstation dimensions and body postures between 17" CRT, 21" CRT, and 19" flat panel monitors  

E-Print Network [OSTI]

Use of visual display terminals has been implicated as a risk factor in visual discomfort. With the progression of new technology, larger CRT monitors and alternate display technologies, such as flat panels, are entering the office environment. Few...

Walline, Erin Kurusz

2012-06-07T23:59:59.000Z

444

Approaches for identifying consumer preferences for the design of technology products : a case study of residential solar panels  

E-Print Network [OSTI]

This thesis investigates ways to obtain consumer preferences for technology products to help designers identify the key attributes that contribute to a product's market success. A case study of residential solar PV panels ...

Chen, Heidi Qianyi

2012-01-01T23:59:59.000Z

445

The reliability of laboratory and consumer panel tests in evaluation of flavor and other characteristics of commercial white pan breads  

E-Print Network [OSTI]

OF PERSONS IH CONSUMER PANEL SELECTING TEST BREAD IN C(%PARISON WITH OTHER BREADS, TYLER, TEXAS, SUNHER 1961. . . . . . . . . . . . . . . . . . 29 ARRANGENEHT GF HEDONIC SCALE RATINGS OF THE PANEL BREADS POR IMCOHPLETE BLOCK DESIGN ANALYSIS, TYLER, TEXAS..., SUMMER 1961. . . . . . . . . . . . . . . . . . 31 F VALUES SHOWING DIFFERENCES BETWEEN TREATMENTS (ELIMINATING BLOCK DIFFERENCES) FOR BALANCED IMCCF1PLETE BLOCK DESIGN, TYLER, TEXAS, SUMMER 1961, . 32 RESULTS OF DUNCAN'S MULTIPLZ RANGE TEST APPLIED...

Davis, Robert P

1962-01-01T23:59:59.000Z

446

DOE Designates Southwest Area and Mid-Atlantic Area National...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Interest Electric Transmission Corridors DOE Designates Southwest Area and Mid-Atlantic Area National Interest Electric Transmission Corridors October 2, 2007 - 11:12am Addthis...

447

Energy efficiency improvements for refrigerator/freezers using prototype doors containing gas-filled panel insulating systems  

SciTech Connect (OSTI)

Energy efficiency improvements in domestic refrigerator/freezers, are directly influenced by the overall thermal performance of the cabinet and doors. An advanced system for reducing heat gain is Gas-Filled Panel thermal insulation technology. Gas-Filled Panels contain a low-conductivity, inert gas at atmospheric pressure and employ a reflective baffle to suppress radiation and convection within the gas. This paper presents energy use test results for a 1993 model 500 liter top mount refrigerator/freezer operated with its original doors and with a series of alternative prototype doors. Gas-Filled Panel technology was used in two types of prototype refrigerator/freezer doors. In one design, panels were used in composite with foam in standard metal door pans; this design yielded no measurable energy savings. In the other design, special polymer door pans were fitted with panels that fill nearly all of the available insulation volume; this design yielded a 6.5% increase in energy efficiency for the entire refrigerator/freezer. The EPA Refrigerator Analysis computer program has been used to predict the change in daily energy consumption with the alternative doors. The computer model also projects a 25% energy efficiency improvement for a refrigerator/freezer that would use Gas-Filled Panel insulation throughout the cabinet as well as the doors.

Griffith, B.; Arasteh, D.; Tuerler, D.

1995-01-01T23:59:59.000Z

448

{100}<100> or 45.degree.-rotated {100}<100>, semiconductor-based, large-area, flexible, electronic devices  

SciTech Connect (OSTI)

Novel articles and methods to fabricate the same resulting in flexible, {100}<100> or 45.degree.-rotated {100}<100> oriented, semiconductor-based, electronic devices are disclosed. Potential applications of resulting articles are in areas of photovoltaic devices, flat-panel displays, thermophotovoltaic devices, ferroelectric devices, light emitting diode devices, computer hard disc drive devices, magnetoresistance based devices, photoluminescence based devices, non-volatile memory devices, dielectric devices, thermoelectric devices and quantum dot laser devices.

Goyal, Amit (Knoxville, TN)

2012-05-15T23:59:59.000Z

449

Scientific and Natural Areas (Minnesota)  

Broader source: Energy.gov [DOE]

Certain scientific and natural areas are established throughout the state for the purpose of preservation and protection. Construction and new development is prohibited in these areas.

450

In Vivo Characterization of a Wide area 802.11b Wireless Seismic Array  

E-Print Network [OSTI]

AmpH charged by a 70W solar panel. The CDCCs are con- nectedyagi antennae with solar panel and Figure 5: A parabolic and

Lukac, Martin; Naik, Vineyak; Stubailo, Igor; Husker, Allen; Estrin, D

2007-01-01T23:59:59.000Z

451

Interagency Panel  

Broader source: Energy.gov [DOE]

Commission on DOE Laboratories, was presented by John Fischer, Director, Defense Laboratories Enterprise Office of the Assistant Secretary of Defense for Research and Engineering Utilization of the DOE National Laboratory Complex, was presented by Jamie Johnson, Director, Office of National Laboratories, Science and Technology Directorate.

452

Advisory Panels  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation InInformationCenterResearch Highlights MediaFuelAbout Us

453

Advisory Panels  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUCProductstwrmrAre theAdministratorCFM LEAP AircraftAdvancing art200

454

Advisory Panels  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUCProductstwrmrAre theAdministratorCFM LEAP AircraftAdvancing art200Advisory

455

Identifying hydrologically sensitive areas: Bridging the gap between science and application  

E-Print Network [OSTI]

nutrient management plans, lack a sound hydrological underpinning for pollutant transport processes S. Steenhuisa , M. Todd Waltera, * a Department of Biological and Environmental Engineering, Cornell University, Ithaca, NY 14853-5701, USA b Department of Crop and Soil Sciences, Cornell University, Ithaca, NY

Walter, M.Todd

456

Large area bulk superconductors  

DOE Patents [OSTI]

A bulk superconductor having a thickness of not less than about 100 microns is carried by a polycrystalline textured substrate having misorientation angles at the surface thereof not greater than about 15.degree.; the bulk superconductor may have a thickness of not less than about 100 microns and a surface area of not less than about 50 cm.sup.2. The textured substrate may have a thickness not less than about 10 microns and misorientation angles at the surface thereof not greater than about 15.degree.. Also disclosed is a process of manufacturing the bulk superconductor and the polycrystalline biaxially textured substrate material.

Miller, Dean J. (Darien, IL); Field, Michael B. (Jersey City, NJ)

2002-01-01T23:59:59.000Z

457

Western Area Power Administration  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun Deng Associate ResearchWestern Area Power

458

700 Area - Hanford Site  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert SouthwestTechnologies |November 2011 Mon, Next2025Steps to MakingImportance of700 Area

459

CEES - Focus Areas  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation InInformationCenterResearchCASL Symposium: Celebrating the Past - VisualizingFocus Areas

460

100 Area - Hanford Site  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert SouthwestTechnologies | BlandinePrincetonOPT Optics MetrologyDepartment of00 Area

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

DuPont Displays Develops Low-Cost Method of Printing OLED Panels  

Broader source: Energy.gov [DOE]

DuPont Displays Inc. (DDI) has developed a novel way of printing color-tunable OLED lighting panels that keeps manufacturing costs low. The method involves processing the organic layers from solution, with most of the process steps taking place under atmospheric conditions rather than in a high vacuum. Industry-standard slot-coating methods are used in conjunction with nozzle printing—in which the solutions of organic materials are continuously jetted through an array of nozzles moving at high speed—allowing the light-emitting materials to be spatially patterned.

462

Field measurements of lateral earth pressures on a pre-cast panel retaining wall  

E-Print Network [OSTI]

OF SCIENCE August 1973 Major Subject: Civil Engineering FIELD MEASUREMENTS OF LATERAL EARTH PRESSURES ON A PRE-CAST PANEL RETAINING WALL A Thesis by DAVID MONROE PRESCOTT Approved as to sty1e and content by: Chai man o Co ttee~ ember ead of Departm... in Appendix I. (The style and format of this thesis follows that used by the Journal of the Soil Mechanics and Foundations Division, Procee ings, of t e American Society of Civil Engineers result of some large scale earth pressure tests at Massachusetts...

Prescott, David Monroe

1973-01-01T23:59:59.000Z

463

Panel Unit Root Tests in the Presence of a Multifactor Error Structure  

E-Print Network [OSTI]

Analysis and Policy (CFAP), University of Cambridge cUniversity of York December 2007 Abstract This paper extends the cross sectionally augmented panel unit root test proposed by Pesaran (2007) to the case of a multifactor error structure. The basic idea... = eit#0; pit is the real exchange rate, eqit is the real equity price index, gdpit is real output, rLit is the quarterly long-term interest rate and poilt is the nominal oil price.5 The 32 countries considered are: Argentina, Australia, Austria, Belgium...

Pesaran, M Hashem; Smith, L Vanessa; Yamagata, Takashi

464

T-1 Training Area  

SciTech Connect (OSTI)

Another valuable homeland security asset at the NNSS is the T-1 training area, which covers more than 10 acres and includes more than 20 separate training venues. Local, County, and State first responders who train here encounter a variety of realistic disaster scenarios. A crashed 737 airliner lying in pieces across the desert, a helicopter and other small aircraft, trucks, buses, and derailed train cars are all part of the mock incident scene. After formal classroom education, first responders are trained to take immediate decisive action to prevent or mitigate the use of radiological or nuclear devices by terrorists. The Counterterrorism Operations Support Center for Radiological Nuclear Training conducts the courses and exercises providing first responders from across the nation with the tools they need to protect their communities. All of these elements provide a training experience that cannot be duplicated anywhere else in the country.

None

2014-11-07T23:59:59.000Z

465

T-1 Training Area  

ScienceCinema (OSTI)

Another valuable homeland security asset at the NNSS is the T-1 training area, which covers more than 10 acres and includes more than 20 separate training venues. Local, County, and State first responders who train here encounter a variety of realistic disaster scenarios. A crashed 737 airliner lying in pieces across the desert, a helicopter and other small aircraft, trucks, buses, and derailed train cars are all part of the mock incident scene. After formal classroom education, first responders are trained to take immediate decisive action to prevent or mitigate the use of radiological or nuclear devices by terrorists. The Counterterrorism Operations Support Center for Radiological Nuclear Training conducts the courses and exercises providing first responders from across the nation with the tools they need to protect their communities. All of these elements provide a training experience that cannot be duplicated anywhere else in the country.

None

2015-01-09T23:59:59.000Z

466

Reflective Optics CPV Panels Enabling Large Scale, Reliable Generation of Solar Energy Cost Competitive with Fossil Fuels: 15 November 2007 - 30 June 2009  

SciTech Connect (OSTI)

SolFocus developed a CPV panel with conversion efficiency >22% and manufacturing run-rate capacity far exceeding 3 MW.

Horne, S.; McDonald, M.; Hartsoch, N.; Desy, K.

2009-12-01T23:59:59.000Z

467

Public Information about the 2014 FESAC Strategic Planning (SP) Panel: Strategy At the 9-10 April 2014 FESAC meeting, the DOE Office of Science (SC) issued a  

E-Print Network [OSTI]

are posted on the FESAC web page (http the verbal input. The panel will have a web site and our community organizations

468

Electricity storage for grid-connected household dwellings with PV panels  

SciTech Connect (OSTI)

Classically electricity storage for PV panels is mostly designed for stand-alone applications. In contrast, we focus in this article on houses connected to the grid with a small-scale storage to store a part of the solar power for postponed consumption within the day or the next days. In this way the house owner becomes less dependent on the grid and does only pay for the net shortage of his energy production. Local storage solutions pave the way for many new applications like omitting over-voltage of the line and bridging periods of power-line black-out. Since 2009 using self-consumption of PV energy is publicly encouraged in Germany, which can be realised by electric storage. This paper develops methods to determine the optimal storage size for grid-connected dwellings with PV panels. From measurements in houses we were able to establish calculation rules for sizing the storage. Two situations for electricity storage are covered: - the storage system is an optimum to cover most of the electricity needs; - it is an optimum for covering the peak power need of a dwelling. After these calculation rules a second step is needed to determine the size of the real battery. The article treats the aspects that should be taken into consideration before buying a specific battery like lead-acid and lithium-ion batteries. (author)

Mulder, Grietus; Six, Daan [Vlaamse Instelling voor Technologisch Onderzoek, Unit Energy Technology, Mol (Belgium); Ridder, Fjo De [Vrije Universiteit Brussel (Belgium)

2010-07-15T23:59:59.000Z

469

High heat flux testing of a two-tube copper panel specimen for LLNL at ASURF  

SciTech Connect (OSTI)

This letter documents the results of the test program conducted for Lawrence Livermore National Laboratory (LLNL) by Westinghouse Advanced Energy Systems Division (AESD) in fulfillment of the Third Amendment to Subcontract 9125401. The original test matrix of 20,000 heating cycles on two test articles called for in the contract was not technically feasible due to the inability of the test articles supplied by LLNL to perform successfully at the required test conditions. Burnout occurred in one of the tubes of a two-tube target during the first series of tests. As a result, the work scope was changed by LLNL such that the tests on the milled copper plate panel specimen were replaced by a second set of heating tests on the second tube of the two-tube copper panel specimen to confirm the conditions for burnout failure. The testing requirements were completed following failure of the second tube at nominally identical conditions under which the first tube failed, and verification of these conditions. This letter completes all contractual obligations by serving as the final report on the test program.

Easoz, J.R.; Sink, D.A.

1984-12-01T23:59:59.000Z

470

Thermal imaging and air-coupled ultrasound characterization of a continuous-fiber ceramic composite panels.  

SciTech Connect (OSTI)

SYLRAMIC{trademark} continuous fiber ceramic-matrix composites (Nicalon{trademark} fiber/SiNC matrix) were fabricated by Dow Corning Corporation with the polymer-impregnation and pyrolysis (PIP) process. The composite microstructure and its uniformity, and the completeness of infiltration during processing were studied as a function of number of PIP cycles. Two nondestructive evaluation (NDE) methods, i.e., infrared thermal imaging and air-coupled ultrasound (UT), were used to investigate flat composite panels of two thicknesses and various sizes. The thermal imaging method provided two-dimensional (2D) images of through-thickness thermal diffusivity distributions, and the air-coupled UT method provided 2D images of through-thickness ultrasonic transmission of the panel components. Results from both types of NDEs were compared at various PIP cycles during fabrication of the composites. A delaminated region was clearly detected and its progressive repair was monitored during processing. The NDE data were also correlated to results obtained from destructive characterization.

Sun, J. G.; Easler, T. E.; Szweda, A.; Pillai, T. A. K.; Deemer, C.; Ellingson, W. A.

1998-04-01T23:59:59.000Z

471

Engineering work plan for PFP criticality alarm panel first unit re-build  

SciTech Connect (OSTI)

This document describes the first step in increasing the quality, reliability, and ease of maintenance of the nine Criticality Alarm Panels (CAP) at PFP. Development control practices and guidelines of WHC-CM-6-1, EP-2.4 and WHC-IP-1026, EPG-2.4 are applied to develop a prototype of a replacement Criticality Alarm Panel (CAP) with facility-use potential. During the development of the prototype CAP, the design requirements of all of PFP`s nine CAPs are considered to develop standardized hardware and detailed design drawings that are tailored to PFP maintenance needs. Increased quality and reliability is achieved through quality hardware, proven technology and design techniques, and the use of the Class 1E workmanship standards of WHC-CM-8-1. The end result of the work described by this work plan is a verified/read-to-install replacement for CAP Z4 and verified/released H-2 drawings that are formatted such that they can easily be replicated when producing design drawings for the other eight CAPs.

Clem, W.E.

1994-09-14T23:59:59.000Z

472

Mine stability evaluation of panel 1 during waste emplacement operations at WIPP  

SciTech Connect (OSTI)

The specific objectives of the work were defined by the Environmental Evaluation Group (EEG) as follows: (1) assess the stability of panel 1 during the proposed operation of waste emplacement; (2) estimate the amount of time before room closure would be expected to transfer rock loads to the waste packages. The work consisted of (1) an analysis of geotechnical data and a review of the Department of Energy`s (DOE) plans for waste emplacement in panel 1, (2) an evaluation of ground conditions based on data analysis and observations of changes in ground conditions since the first evaluation in 1993 (USBM 1993), and (3) preparation of a report and presentation of the results to EEG staff. Excluded from this study are radiological safety issues and policies. The study is based on data provided by DOE and Westinghouse Electric Corporation (operator of the site) and conversations with DOE and Westinghouse personnel. MTI cannot independently verify the accuracy of the data within the scope of this study and recommends independent evaluations of data gathering, quality assurance procedures, and structural designs. The operator has the ultimate responsibility for structural designs and has expressed a strong commitment to ensuring worker safety.

Maleki, H. [Maleki Technologies Inc., Spokane, WA (United States)

1998-07-01T23:59:59.000Z

473

DOE - Office of Legacy Management -- Buffalo NY Site - NY 54  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou areDowntown Site -MiamiYVE r.x-L*AliquippaNewBuffalo

474

Sylvania Corporation, Hicksville, NY and Bayside, NY - Addendum to July  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security AdministrationcontrollerNanocrystalline GalliumSuppressionSustainable SuccessSustainableL L 28, 2004 |

475

Sylvania Corporation, Hicksville, NY and Bayside NY | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from the GridwiseSiteDepartmentChallengeCompliance7/109 Historical Perspective

476

Aging of polyurethane foam insulation in simulated refrigerator panels -- Initial results with third-generation blowing agents  

SciTech Connect (OSTI)

Laboratory data are presented on the effect of constant-temperature aging on the apparent thermal conductivity of polyurethane foam insulation for refrigerators and freezers. The foam specimens were blown with HCFC-141b and with three of its potential replacements -- HFC-134a, HFC-245fa, and cyclopentane. Specimens were aged at constant temperatures of 90 F, 40 F, and {minus}10 F. Thermal conductivity measurements were made on two types of specimens: full-thickness simulated refrigerator panels containing foam enclosed between solid plastic sheets, and thin slices of core foam cut from similar panels. Results are presented for about 250 days of aging for the core-foam specimens and for the first six months of aging for the full-thickness panels.

Wilkes, K.E.; Gabbard, W.A.; Weaver, F.J.

1998-11-01T23:59:59.000Z

477

Aging of Polyurethane Foam Insulation in Simulated Refrigerator Panels--One-Year Results with Third-Generation Blowing Agents  

SciTech Connect (OSTI)

Laboratory data are presented on the effect of constant-temperature aging on the apparent thermal conductivity of polyurethane foam insulation for refrigerators and freezers. The foam specimens were blown with HCFC-141b and with three of its potential replacements--HFC-134a, HFC-245fa, and cyclopentane. Specimens were aged at constant temperatures of 90 F, 40 F, and {minus}10 F. Thermal conductivity measurements were made on two types of specimens: full-thickness simulated refrigerator panels containing foam enclosed between solid plastic sheets, and thin slices of core foam cut from similar panels. Results are presented for the first year of a multi-year study for the full-thickness panels and for about 1-1/2 years of aging for the core-foam specimens.

Gabbard, W.A.; Weaver, F.J.; Wilkes, K.E.

1999-09-27T23:59:59.000Z

478

Surface Water Management Areas (Virginia)  

Broader source: Energy.gov [DOE]

This legislation establishes surface water management areas, geographically defined surface water areas in which the State Water Control Board has deemed the levels or supply of surface water to be...

479

Communication in Home Area Networks  

E-Print Network [OSTI]

used in area like smart buildings, street light controls andbuilding. This section focuses on HAN design to address two smart

Wang, Yubo

2012-01-01T23:59:59.000Z

480

ny_50m_wind  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Metadata also available as Metadata: IdentificationInformation DataQualityInformation SpatialDataOrganizationInformation SpatialReferenceInformation EntityandAttributeI...

Note: This page contains sample records for the topic "ny area panel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Report to the Nuclear Regulatory Commission from the staff panel on the Commission's determination of an Extraordinary Nuclear Occurrence (ENO)  

SciTech Connect (OSTI)

The Panel finds that the first criterion, pertaining to whether the accident caused a discharge of radioactive material or levels of radiation offsite as defined in 10 CFR 140.84, has not been met. It further finds that there is presently insufficient information to support any definitive finding as to whether or not the second criterion, relating to damage to persons or property offsite as defined in 10 CFR 140.85, has been met. Since the Panel has not found that both criteria have been met, it recommends that the Commission determine that the accident at Three Mile Island did not constitute an extraordinary nuclear occurrence.

none,

1980-01-01T23:59:59.000Z

482

Micro-Earthquake At Neal Hot Springs Geothermal Area (Nichols...  

Open Energy Info (EERE)

seismic sensor, a data acquisition system that records information onto flash drives, a solar panel and battery, and a fence to keep cows out. References Scott Nichols, David...

483

E-Print Network 3.0 - advisory panel ad Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Fusion 10 AREA ADVISORY SR1.3.3.1K, Summary: Advisory Committees, is a perennially used ad hoc committee now awaiting formal charge codification... ACADEMIC AREA ADVISORY...

484

Fire Hazards Analysis for the 200 Area Interim Storage Area  

SciTech Connect (OSTI)

This documents the Fire Hazards Analysis (FHA) for the 200 Area Interim Storage Area. The Interim Storage Cask, Rad-Vault, and NAC-1 Cask are analyzed for fire hazards and the 200 Area Interim Storage Area is assessed according to HNF-PRO-350 and the objectives of DOE Order 5480 7A. This FHA addresses the potential fire hazards associated with the Interim Storage Area (ISA) facility in accordance with the requirements of DOE Order 5480 7A. It is intended to assess the risk from fire to ensure there are no undue fire hazards to site personnel and the public and to ensure property damage potential from fire is within acceptable limits. This FHA will be in the form of a graded approach commensurate with the complexity of the structure or area and the associated fire hazards.

JOHNSON, D.M.

2000-01-06T23:59:59.000Z

485

Reference module selection criteria for accurate testing of photovoltaic (PV) panels  

SciTech Connect (OSTI)

It is shown that for accurate testing of PV panels the correct selection of reference modules is important. A detailed description of the test methodology is given. Three different types of reference modules, having different I{sub SC} (short circuit current) and power (in Wp) have been used for this study. These reference modules have been calibrated from NREL. It has been found that for accurate testing, both I{sub SC} and power of the reference module must be either similar or exceed to that of modules under test. In case corresponding values of the test modules are less than a particular limit, the measurements may not be accurate. The experimental results obtained have been modeled by using simple equivalent circuit model and associated I-V equations. (author)

Roy, J.N.; Gariki, Govardhan Rao; Nagalakhsmi, V. [Solar Semiconductor Pvt. Ltd., Banjara Hills, Hyderabad (India)

2010-01-15T23:59:59.000Z

486

Method of forming a spacer for field emission flat panel displays  

DOE Patents [OSTI]

Spacers are disclosed for applications such as field emission flat panel displays and vacuum microelectronics, and which involves the application of aerogel/xerogel technology to the formation of the spacer. In a preferred approach the method uses a mold and mold release agent wherein the gel precursor is a liquid which can be applied to the mold filling holes which expose the substrate (either the baseplate or the faceplate). A release agent is applied to the mold prior to precursor application to ease removal of the mold after formation of the dielectric spacer. The shrinkage of the gel during solvent extraction also improves mold removal. The final spacer material is a good dielectric, such as silica, secured to the substrate. 3 figs.

Bernhardt, A.F.; Contolini, R.J.

1997-08-19T23:59:59.000Z

487

Method of forming a spacer for field emission flat panel displays  

DOE Patents [OSTI]

Spacers for applications such as field emission flat panel displays and vacuum microelectronics, and which involves the application of aerogel/xerogel technology to the formation of the spacer. In a preferred approach the method uses a mold and mold release agent wherein the gel precursor is a liquid which can be applied to the mold filling holes which expose the substrate (either the baseplate or the faceplate). A release agent is applied to the mold prior to precursor application to ease removal of the mold after formation of the dielectric spacer. The shrinkage of the gel during solvent extraction also improves mold removal. The final spacer material is a good dielectric, such as silica, secured to the substrate.

Bernhardt, Anthony F. (Berkeley, CA); Contolini, Robert J. (Pleasanton, CA)

1997-01-01T23:59:59.000Z

488

Ein historisches Photovoltaik-Modul:das TSG MQ 36/0. A historical module:the TSG MQ 36/0 solar panel.  

E-Print Network [OSTI]

/0 solar panel. #12;Die Photovoltaikanlage des Energielabors der Universi- tät Oldenburg ist eine der the condition of a solar module:Scientists examine the solar panel. #12;54 EINBLICKE 9 The "Energielabor"attheUniversityofOldenburg modules provide very important measurement data for the current discussion about the lifetime of solar

Damm, Werner

489

Science news doi:10.1038/nindia.2012.185; Published online 17 December 2012 Stacked panels boost solar energy production  

E-Print Network [OSTI]

solar energy production K. S. Jayaraman Researchers at Gujarat Energy Research and Management Institute, the energy generation from commercially available single layer solar panel system for a typical day the energy generation by stacking transparent solar panels which will become available in the near future

Harinarayana, T.

490

Energy Frontier Research Centers: A View from Senior EFRC Representatives (2011 EFRC Summit, panel session)  

SciTech Connect (OSTI)

A distinguished panel of scientists from the EFRC community provide their perspective on the importance of EFRCs for addressing critical energy needs at the 2011 EFRC Summit. Persis Drell, Director at SLAC, served as moderator. Panel members are Neal Armstrong (Director of the Center for Interface Science: Solar Electric Materials, led by the University of Arizona), Emily Carter (Co-Director of the Combustion EFRC, led by Princeton University. She is also Team Leader of the Heterogeneous Functional Materials Center, led by the University of South Caroline), Don DePaolo (Director of the Center for Nanoscale Control of Geologic CO2, led by LBNL), and Brent Gunnoe (Director of the Center for Catalytic Hydrocarbon Functionalization, led by the University of Virginia). The 2011 EFRC Summit and Forum brought together the EFRC community and science and policy leaders from universities, national laboratories, industry and government to discuss "Science for our Nation's Energy Future." In August 2009, the Office of Science established 46 Energy Frontier Research Centers. The EFRCs are collaborative research efforts intended to accelerate high-risk, high-reward fundamental research, the scientific basis for transformative energy technologies of the future. These Centers involve universities, national laboratories, nonprofit organizations, and for-profit firms, singly or in partnerships, selected by scientific peer review. They are funded at $2 to $5 million per year for a total planned DOE commitment of $777 million over the initial five-year award period, pending Congressional appropriations. These integrated, multi-investigator Centers are conducting fundamental research focusing on one or more of several “grand challenges” and use-inspired “basic research needs” recently identified in major strategic planning efforts by the scientific community. The purpose of the EFRCs is to integrate the talents and expertise of leading scientists in a setting designed to accelerate research that transforms the future of energy and the environment.

Drell, Persis (SLAC) [SLAC; Armstrong, Neal (University of Arizona) [University of Arizona; Carter, Emily (Princeton University) [Princeton University; DePaolo, Don (Lawrence Berkeley National Laboratory) [Lawrence Berkeley National Laboratory; Gunnoe, Brent (University of Virginia) [University of Virginia

2011-05-25T23:59:59.000Z

491

Science for Energy Technology: The Industry Perspective (2011 EFRC Summit, panel session)  

SciTech Connect (OSTI)

A distinguished panel of industry leaders discussed how basic science impacts energy technology at the 2011 EFRC Summit. Panel members are Jeffrey Wadworth, President and CEO of Battelle Memorial Institute; David E. Carlson, the Chief Scientist for BP Solar; Yet-Ming Chiang, Professor at MIT and the founder of A123 Systems; and Catherine T. Hunt, the R&D Director of Innovation Sourcing and Sustainable Technologies at the Dow Chemical Company. The 2011 EFRC Summit and Forum brought together the EFRC community and science and policy leaders from universities, national laboratories, industry and government to discuss 'Science for our Nation's Energy Future.' In August 2009, the Office of Science established 46 Energy Frontier Research Centers. The EFRCs are collaborative research efforts intended to accelerate high-risk, high-reward fundamental research, the scientific basis for transformative energy technologies of the future. These Centers involve universities, national laboratories, nonprofit organizations, and for-profit firms, singly or in partnerships, selected by scientific peer review. They are funded at $2 to $5 million per year for a total planned DOE commitment of $777 million over the initial five-year award period, pending Congressional appropriations. These integrated, multi-investigator Centers are conducting fundamental research focusing on one or more of several 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The purpose of the EFRCs is to integrate the talents and expertise of leading scientists in a setting designed to accelerate research that transforms the future of energy and the environment.

Wadsworth, Jeffrey (Battelle Memorial Institute) [Battelle Memorial Institute; Carlson, David E. (BP Solar) [BP Solar; Chiang, Yet-Ming (MIT and A123 Systems) [MIT and A123 Systems; Hunt, Catherine T. (Dow Chemical) [Dow Chemical

2011-05-25T23:59:59.000Z

492

Energy Frontier Research Centers: A View from Senior EFRC Representatives (2011 EFRC Summit, panel session)  

ScienceCinema (OSTI)

A distinguished panel of scientists from the EFRC community provide their perspective on the importance of EFRCs for addressing critical energy needs at the 2011 EFRC Summit. Persis Drell, Director at SLAC, served as moderator. Panel members are Neal Armstrong (Director of the Center for Interface Science: Solar Electric Materials, led by the University of Arizona), Emily Carter (Co-Director of the Combustion EFRC, led by Princeton University. She is also Team Leader of the Heterogeneous Functional Materials Center, led by the University of South Caroline), Don DePaolo (Director of the Center for Nanoscale Control of Geologic CO2, led by LBNL), and Brent Gunnoe (Director of the Center for Catalytic Hydrocarbon Functionalization, led by the University of Virginia). The 2011 EFRC Summit and Forum brought together the EFRC community and science and policy leaders from universities, national laboratories, industry and government to discuss "Science for our Nation's Energy Future." In August 2009, the Office of Science established 46 Energy Frontier Research Centers. The EFRCs are collaborative research efforts intended to accelerate high-risk, high-reward fundamental research, the scientific basis for transformative energy technologies of the future. These Centers involve universities, national laboratories, nonprofit organizations, and for-profit firms, singly or in partnerships, selected by scientific peer review. They are funded at $2 to $5 million per year for a total planned DOE commitment of $777 million over the initial five-year award period, pending Congressional appropriations. These integrated, multi-investigator Centers are conducting fundamental research focusing on one or more of several ?grand challenges? and use-inspired ?basic research needs? recently identified in major strategic planning efforts by the scientific community. The purpose of the EFRCs is to integrate the talents and expertise of leading scientists in a setting designed to accelerate research that transforms the future of energy and the environment.

Drell, Persis (SLAC); Armstrong, Neal (University of Arizona); Carter, Emily (Princeton University); DePaolo, Don (Lawrence Berkeley National Laboratory); Gunnoe, Brent (University of Virginia)

2012-03-16T23:59:59.000Z

493

Science for Energy Technology: The Industry Perspective (2011 EFRC Summit, panel session)  

ScienceCinema (OSTI)

A distinguished panel of industry leaders discussed how basic science impacts energy technology at the 2011 EFRC Summit. Panel members are Jeffrey Wadworth, President and CEO of Battelle Memorial Institute; David E. Carlson, the Chief Scientist for BP Solar; Yet-Ming Chiang, Professor at MIT and the founder of A123 Systems; and Catherine T. Hunt, the R&D Director of Innovation Sourcing and Sustainable Technologies at the Dow Chemical Company. The 2011 EFRC Summit and Forum brought together the EFRC community and science and policy leaders from universities, national laboratories, industry and government to discuss 'Science for our Nation's Energy Future.' In August 2009, the Office of Science established 46 Energy Frontier Research Centers. The EFRCs are collaborative research efforts intended to accelerate high-risk, high-reward fundamental research, the scientific basis for transformative energy technologies of the future. These Centers involve universities, national laboratories, nonprofit organizations, and for-profit firms, singly or in partnerships, selected by scientific peer review. They are funded at $2 to $5 million per year for a total planned DOE commitment of $777 million over the initial five-year award period, pending Congressional appropriations. These integrated, multi-investigator Centers are conducting fundamental research focusing on one or more of several 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The purpose of the EFRCs is to integrate the talents and expertise of leading scientists in a setting designed to accelerate research that transforms the future of energy and the environment.

Wadsworth, Jeffrey (Battelle Memorial Institute); Carlson, David E. (BP Solar); Chiang, Yet-Ming (MIT and A123 Systems); Hunt, Catherine T. (Dow Chemical)

2012-03-20T23:59:59.000Z

494

Journal of Fusion Energy, Vol. 13, Nos. 2/3, 1994 Fusion Energy Advisory Committee (FEAC): Panel 7 Report  

E-Print Network [OSTI]

.2. A Brief History of Heavy Ion Fusion The heavy ion fusion approach to inertial fusion energy (IFEJournal of Fusion Energy, Vol. 13, Nos. 2/3, 1994 Fusion Energy Advisory Committee (FEAC): Panel 7 Report on Inertial Fusion Energy 1 Ronald Davidson,2 Barrett Ripin, Mohamed Abdou, David E. Baldwin

Abdou, Mohamed

495

Open-Die Forging of Structurally Porous Sandwich Panels D.M. ELZEY and H.N.G. WADLEY  

E-Print Network [OSTI]

structures has exploited diffusion bonding and superplastic compressibility, which precludes the use and the core and face sheet thicknesses are a comb or porous cores bonded between stiff face sheets have balsa wood.[1] Titanium sand- processing. The modeling is complicated by the high levels wich panel

Wadley, Haydn

496

Energy, cost, and CO2 emission comparison between radiant wall panel1 systems and radiator systems2  

E-Print Network [OSTI]

Energy, cost, and CO2 emission comparison between radiant wall panel1 systems and radiator systems215 by software EnergyPlus. The investigation shows that the PH-WI gives the best results. The RH-16 radiant66 systems and their comparison with other heating systems regarding energy consumption and67

Boyer, Edmond

497

Optimal heat-reversible snap joints for frame-panel assembly in aluminum space frame automotive bodies  

E-Print Network [OSTI]

Optimal heat-reversible snap joints for frame-panel assembly in aluminum space frame automotive, snap-fit joints, aluminum space frame 1 INTRODUCTION Aluminum space frame (AFS) automotive bodies to dramatically improve the recyclability of aluminum space frame (ASF) bodies by enabling clean separation

Saitou, Kazuhiro "Kazu"

498

Climate Extremes, Uncertainty and Impacts Climate Change Challenge: The Fourth Assessment Report of the Intergovernmental Panel on Climate Change  

E-Print Network [OSTI]

Climate Extremes, Uncertainty and Impacts Climate Change Challenge: The Fourth Assessment Report of the Intergovernmental Panel on Climate Change (IPCC, AR4) has resulted in a wider acceptance of global climate change climate extremes and change impacts. Uncertainties in process studies, climate models, and associated

499

Acknowledgments The National Reading Panel wishes to express its gratitude to the following individuals for their contributions  

E-Print Network [OSTI]

.D. Linnea Ehri, Ph.D. Gwenette Ferguson, M.Ed. Norma Garza, C.P.A. Michael L. Kamil, Ph.D. Cora Bagley.D. Joanna Williams, Ph.D. Dale Willows, Ph.D. Joanne Yatvin, Ph.D. MEMBERS OF THE NATIONAL READING PANEL Comprehension Michael L. Kamil, Chair Gwenette Ferguson Norma Garza Thomas Trabasso JoannaWilliams Fluency S

Rau, Don C.

500

The University of Texas at Austin September 30, 2011 Communications Termination Blocks and Patch Panels 27 11 19-1  

E-Print Network [OSTI]

and patch panels for copper, fiber, and coaxial backbone cables. 1.2 RELATED DOCUMENTS A. The latest, guidelines and specifications. B. The following codes, as required by law: 1. ANSI/NFPA-70, National Electric in Section 27 00 00 Communications: 1. Product Information a) Provide manufacturer's product information

Dawson, Clint N.