Powered by Deep Web Technologies
Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

International Fuel Services and Commercial Engagement | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

International Fuel Services and Commercial Engagement International Fuel Services and Commercial Engagement The Office of International Nuclear Energy Policy and Cooperation...

2

Nuclear Fuels  

Science Journals Connector (OSTI)

The core of a nuclear reactor is composed of a controlled critical configuration of a fissile material, which in strict a sense is the fuel. This fissile material is contained in a matrix, normally a ceramic c...

Rudy J. M. Konings; Thierry Wiss…

2011-01-01T23:59:59.000Z

3

Global Nuclear Energy Partnership Fact Sheet - Establish Reliable Fuel  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Global Nuclear Energy Partnership Fact Sheet - Establish Reliable Global Nuclear Energy Partnership Fact Sheet - Establish Reliable Fuel Services Global Nuclear Energy Partnership Fact Sheet - Establish Reliable Fuel Services GNEP would build and strengthen a reliable international fuel services consortium under which "fuel supplier nations" would choose to operate both nuclear power plants and fuel production and handling facilities, providing reliable fuel services to "user nations" that choose to only operate nuclear power plants. This international consortium is a critical component of the GNEP initiative to build an improved, more proliferation-resistant nuclear fuel cycle that recycles used fuel, while Global Nuclear Energy Partnership Fact Sheet - Establish Reliable Fuel Services More Documents & Publications

4

Nuclear Reactor Materials and Fuels  

Science Journals Connector (OSTI)

Nuclear reactor materials and fuels can be classified into six categories: Nuclear fuel materials Nuclear clad materials Nuclear coolant materials Nuclear poison materials Nuclear moderator materials

Dr. James S. Tulenko

2012-01-01T23:59:59.000Z

5

Advanced nuclear fuel  

SciTech Connect

Kurt Terrani uses his expertise in materials science to develop safer fuel for nuclear power plants.

Terrani, Kurt

2014-07-14T23:59:59.000Z

6

Advanced nuclear fuel  

ScienceCinema (OSTI)

Kurt Terrani uses his expertise in materials science to develop safer fuel for nuclear power plants.

Terrani, Kurt

2014-07-15T23:59:59.000Z

7

Fuel Economy Web Services  

NLE Websites -- All DOE Office Websites (Extended Search)

FuelEconomy.gov Web Services FuelEconomy.gov Web Services Data Description atvtype - alternative fuel or advanced technology vehicle Bifuel (CNG) - Bi-fuel gasoline and compressed natural gas vehicle Bifuel (LPG) - Bi-fuel gasoline and propane vehicle CNG - Compressed natural gas vehicle Diesel - Diesel vehicle EV - Electric vehicle FFV - Flexible fueled vehicle (gasoline or E85) Hybrid - Hybrid vehicle Plug-in Hybrid - Plug-in hybrid vehicle drive - drive axle type 2-Wheel Drive 4-Wheel Drive* 4-Wheel or All-Wheel Drive* All-Wheel Drive* Front-Wheel Drive Part-time 4-Wheel Drive* Rear-Wheel Drive *Prior to Model Year 2010 EPA did not differentiate between All Wheel Drive and Four Wheel Drive salesArea - EPA sales area code. The area of the country where the vehicle can legally be sold. New federally certified vehicles can be sold in all states except California

8

6 Nuclear Fuel Designs  

NLE Websites -- All DOE Office Websites (Extended Search)

Message from the Director Message from the Director 2 Nuclear Power & Researrh Reactors 3 Discovery of Promethium 4 Nuclear Isotopes 4 Nuclear Medicine 5 Nuclear Fuel Processes & Software 6 Nuclear Fuel Designs 6 Nuclear Safety 7 Nuclear Desalination 7 Nuclear Nonproliferation 8 Neutron Scattering 9 Semiconductors & Superconductors 10 lon-Implanted Joints 10 Environmental Impact Analyses 11 Environmental Quality 12 Space Exploration 12 Graphite & Carbon Products 13 Advanced Materials: Alloys 14 Advanced Materials: Ceramics 15 Biological Systems 16 Biological Systems 17 Computational Biology 18 Biomedical Technologies 19 Intelligent Machines 20 Health Physics & Radiation Dosimetry 21 Radiation Shielding 21 Information Centers 22 Energy Efficiency: Cooling & Heating

9

Nuclear Transportation Management Services | Department of Energy  

Office of Environmental Management (EM)

Nuclear Transportation Management Services Nuclear Transportation Management Services Nuclear Transportation Management Services More Documents & Publications Transportation and...

10

Nuclear Fuels | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Nuclear Fuels Nuclear Fuels Nuclear Fuels A reactor's ability to produce power efficiently is significantly affected by the composition and configuration of its fuel system. A nuclear fuel assembly consists of hundreds of thousands of uranium pellets, stacked and encapsulated within tubes called fuel rods or fuel pins which are then bundled together in various geometric arrangements. There are many design considerations for the material composition and geometric configuration of the various components comprising a nuclear fuel system. Future designs for the fuel and the assembly or packaging of fuel will contribute to cleaner, cheaper and safer nuclear energy. Today's process for developing and testing new fuel systems is resource and time intensive. The process to manufacture the fuel, build an assembly,

11

Nuclear fuel cycle information workshop  

SciTech Connect

This overview of the nuclear fuel cycle is divided into three parts. First, is a brief discussion of the basic principles of how nuclear reactors work; second, is a look at the major types of nuclear reactors being used and world-wide nuclear capacity; and third, is an overview of the nuclear fuel cycle and the present industrial capability in the US.

Not Available

1983-01-01T23:59:59.000Z

12

Nuclear Spent Fuel Program Drivers  

NLE Websites -- All DOE Office Websites (Extended Search)

was created to plan and coordinate the management of Department of Energy-owned spent nuclear fuel. It was established as a result of a 1992 decision to stop spent nuclear fuel...

13

TEPP - Spent Nuclear Fuel | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

- Spent Nuclear Fuel - Spent Nuclear Fuel TEPP - Spent Nuclear Fuel This scenario provides the planning instructions, guidance, and evaluation forms necessary to conduct an exercise involving a highway shipment of spent nuclear fuel. This exercise manual is one in a series of five scenarios developed by the Department of Energy Transportation Emergency Preparedness Program. Responding agencies may include several or more of the following: local municipal and county fire, police, sheriff, and Emergency Medical Services (EMS) personnel; state, local, and federal emergency response teams; emergency response contractors;and other emergency response resources that could potentially be provided by the carrier and the originating facility (shipper). Spent Nuclear Fuel.docx More Documents & Publications

14

VT Nuclear Services ltd | Open Energy Information  

Open Energy Info (EERE)

VT Nuclear Services ltd Jump to: navigation, search Name: VT Nuclear Services ltd Place: Warrington, United Kingdom Zip: WA4 4BP Sector: Services Product: VT Nuclear Services...

15

International Fuel Services and Commercial Engagement | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

International Fuel Services and Commercial Engagement International Fuel Services and Commercial Engagement International Fuel Services and Commercial Engagement The Office of International Nuclear Energy Policy and Cooperation (INEPC) primary mission is to oversee and manage the Department's international commercial nuclear fuel management initiatives, and to support Departmental/USG initiatives supporting advocacy for U.S. nuclear exports, including the Team USA initiative. INEPC also supports advancing international civil nuclear policy through the development of innovative approaches to used fuel storage and permanent disposition, including commercially-based comprehensive fuel services and financing vehicles. Program Focuses To achieve these goals, INEPC has taken a leadership role in the following: Leading U.S. government engagement to advance CFS as an option for

16

World nuclear fuel cycle requirements 1990  

SciTech Connect

This analysis report presents the projected requirements for uranium concentrate and uranium enrichment services to fuel the nuclear power plants expected to be operating under three nuclear supply scenarios. Two of these scenarios, the Lower Reference and Upper Reference cases, apply to the United States, Canada, Europe, the Far East, and other countries with free market economies (FME countries). A No New Orders scenario is presented only for the United States. These nuclear supply scenarios are described in Commercial Nuclear Power 1990: Prospects for the United States and the World (DOE/EIA-0438(90)). This report contains an analysis of the sensitivities of the nuclear fuel cycle projections to different levels and types of projected nuclear capacity, different enrichment tails assays, higher and lower capacity factors, changes in nuclear fuel burnup levels, and other exogenous assumptions. The projections for the United States generally extend through the year 2020, and the FME projections, which include the United States, are provided through 2010. The report also presents annual projections of spent nuclear fuel discharges and inventories of spent fuel. Appendix D includes domestic spent fuel projections through the year 2030 for the Lower and Upper Reference cases and through 2040, the last year in which spent fuel is discharged, for the No New Orders case. These disaggregated projections are provided at the request of the Department of Energy's Office of Civilian Radioactive Waste Management.

Not Available

1990-10-26T23:59:59.000Z

17

Alternative Fuels Data Center: Propane Self-Service Fueling Station  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Propane Self-Service Propane Self-Service Fueling Station Regulations to someone by E-mail Share Alternative Fuels Data Center: Propane Self-Service Fueling Station Regulations on Facebook Tweet about Alternative Fuels Data Center: Propane Self-Service Fueling Station Regulations on Twitter Bookmark Alternative Fuels Data Center: Propane Self-Service Fueling Station Regulations on Google Bookmark Alternative Fuels Data Center: Propane Self-Service Fueling Station Regulations on Delicious Rank Alternative Fuels Data Center: Propane Self-Service Fueling Station Regulations on Digg Find More places to share Alternative Fuels Data Center: Propane Self-Service Fueling Station Regulations on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

18

Swelling-resistant nuclear fuel  

DOE Patents (OSTI)

A nuclear fuel according to one embodiment includes an assembly of nuclear fuel particles; and continuous open channels defined between at least some of the nuclear fuel particles, wherein the channels are characterized as allowing fission gasses produced in an interior of the assembly to escape from the interior of the assembly to an exterior thereof without causing significant swelling of the assembly. Additional embodiments, including methods, are also presented.

Arsenlis, Athanasios (Hayward, CA); Satcher, Jr., Joe (Patterson, CA); Kucheyev, Sergei O. (Oakland, CA)

2011-12-27T23:59:59.000Z

19

Spent Nuclear Fuel Fact Sheets  

NLE Websites -- All DOE Office Websites (Extended Search)

management needs. By coordinating common needs for research, technology development, and testing programs, the National Spent Nuclear Fuel Program is achieving cost efficiencies...

20

Advances in Metallic Nuclear Fuel  

Science Journals Connector (OSTI)

Metallic nuclear fuels have generated renewed interest for advanced ... operations is excellent. Ongoing irradiation tests in Argonne-West’s Idaho-based Experimental Breeder Reactor ... fast reactor (IFR) concept...

B. R. Seidel; L. C. Walters; Y. I. Chang

1987-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Nuclear Fuel Cycle & Vulnerabilities  

SciTech Connect

The objective of safeguards is the timely detection of diversion of significant quantities of nuclear material from peaceful nuclear activities to the manufacture of nuclear weapons or of other nuclear explosive devices or for purposes unknown, and deterrence of such diversion by the risk of early detection. The safeguards system should be designed to provide credible assurances that there has been no diversion of declared nuclear material and no undeclared nuclear material and activities.

Boyer, Brian D. [Los Alamos National Laboratory

2012-06-18T23:59:59.000Z

22

Sustainability Features of Nuclear Fuel Cycle Options  

E-Print Network (OSTI)

The nuclear fuel cycle is the series of stages that nuclear fuel materials go through in a cradle to grave framework. The Once Through Cycle (OTC) is the current fuel cycle implemented in the United States; in which an ...

Passerini, Stefano

23

Nuclear fuel recycling in 4 minutes | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Nuclear fuel recycling in 4 minutes Share Topic Energy Energy sources Nuclear energy Nuclear fuel cycle Reactors...

24

Nuclear reactors and the nuclear fuel cycle  

SciTech Connect

According to the author, the first sustained nuclear fission chain reaction was not at the University of Chicago, but at the Oklo site in the African country of Gabon. Proof of this phenomenon is provided by mass spectrometric and analytical chemical measurements by French scientists. The U.S. experience in developing power-producing reactors and their related fuel and fuel cycles is discussed.

Pearlman, H

1989-11-01T23:59:59.000Z

25

Activities Related to Storage of Spent Nuclear Fuel | Department...  

Office of Environmental Management (EM)

Activities Related to Storage of Spent Nuclear Fuel Activities Related to Storage of Spent Nuclear Fuel Activities Related to Storage of Spent Nuclear Fuel More Documents &...

26

Incorporation of Hydride Nuclear Fuels in Commercial Light Water Reactors  

E-Print Network (OSTI)

of hydride fueled BWRs. Nuclear Engineering and Design, 239:Fueled PWR Cores. Nuclear Engineering and Design, 239:1489–Hydride Fueled LWRs. Nuclear Engineering and Design, 239:

Terrani, Kurt Amir

2010-01-01T23:59:59.000Z

27

Transportation Services Fueling Operation Transportation Services has installed a software system that will facilitate fueling of  

E-Print Network (OSTI)

Transportation Services Fueling Operation Transportation Services has installed a software system into this system. All University vehicles that wish to fuel at UH M noa Transportation Services will be required the application below and submit your application to Transportation Services before attempting to fuel your

28

Spent nuclear fuel reprocessing modeling  

SciTech Connect

The long-term wide development of nuclear power requires new approaches towards the realization of nuclear fuel cycle, namely, closed nuclear fuel cycle (CNFC) with respect to fission materials. Plant nuclear fuel cycle (PNFC), which is in fact the reprocessing of spent nuclear fuel unloaded from the reactor and the production of new nuclear fuel (NF) at the same place together with reactor plant, can be one variant of CNFC. Developing and projecting of PNFC is a complicated high-technology innovative process that requires modern information support. One of the components of this information support is developed by the authors. This component is the programme conducting calculations for various variants of process flow sheets for reprocessing SNF and production of NF. Central in this programme is the blocks library, where the blocks contain mathematical description of separate processes and operations. The calculating programme itself has such a structure that one can configure the complex of blocks and correlations between blocks, appropriate for any given flow sheet. For the ready sequence of operations balance calculations are made of all flows, i.e. expenses, element and substance makeup, heat emission and radiation rate are determined. The programme is open and the block library can be updated. This means that more complicated and detailed models of technological processes will be added to the library basing on the results of testing processes using real equipment, in test operating mode. The development of the model for the realization of technical-economic analysis of various variants of technologic PNFC schemes and the organization of 'operator's advisor' is expected. (authors)

Tretyakova, S.; Shmidt, O.; Podymova, T.; Shadrin, A.; Tkachenko, V. [Bochvar Institute, 5 Rogova str., Moscow 123098 (Russian Federation); Makeyeva, I.; Tkachenko, V.; Verbitskaya, O.; Schultz, O.; Peshkichev, I. [Russian Federal Nuclear Center - VNIITF E.I. Zababakhin, p.o.box 245, Snezhinsk, 456770 (Russian Federation)

2013-07-01T23:59:59.000Z

29

International Nuclear Services Ltd | Open Energy Information  

Open Energy Info (EERE)

Services Ltd Jump to: navigation, search Name: International Nuclear Services Ltd Place: Cheshire, England, United Kingdom Zip: WA3 6AS Sector: Services Product: England-based firm...

30

Compositions and methods for treating nuclear fuel  

DOE Patents (OSTI)

Compositions are provided that include nuclear fuel. Methods for treating nuclear fuel are provided which can include exposing the fuel to a carbonate-peroxide solution. Methods can also include exposing the fuel to an ammonium solution. Methods for acquiring molybdenum from a uranium comprising material are provided.

Soderquist, Chuck Z; Johnsen, Amanda M; McNamara, Bruce K; Hanson, Brady D; Smith, Steven C; Peper, Shane M

2013-08-13T23:59:59.000Z

31

Compositions and methods for treating nuclear fuel  

DOE Patents (OSTI)

Compositions are provided that include nuclear fuel. Methods for treating nuclear fuel are provided which can include exposing the fuel to a carbonate-peroxide solution. Methods can also include exposing the fuel to an ammonium solution. Methods for acquiring molybdenum from a uranium comprising material are provided.

Soderquist, Chuck Z; Johnsen, Amanda M; McNamara, Bruce K; Hanson, Brady D; Smith, Steven C; Peper, Shane M

2014-01-28T23:59:59.000Z

32

Nuclear Fuel Cycle Integrated System Analysis  

NLE Websites -- All DOE Office Websites (Extended Search)

Fuel Cycle Integrated System Analysis Fuel Cycle Integrated System Analysis Abdellatif M. Yacout Argonne National Laboratory Nuclear Engineering Division The nuclear fuel cycle is a complex system with multiple components and activities that are combined to provide nuclear energy to a variety of end users. The end uses of nuclear energy are diverse and include electricity, process heat, water desalination, district heating, and possibly future hydrogen production for transportation and energy storage uses. Components of the nuclear fuel cycle include front end components such as uranium mining, conversion and enrichment, fuel fabrication, and the reactor component. Back end of the fuel cycle include used fuel coming out the reactor, used fuel temporary and permanent storage, and fuel reprocessing. Combined with those components there

33

Nuclear Fuel Storage and Transportation Planning Project Overview...  

Office of Environmental Management (EM)

Fuel Storage and Transportation Planning Project Overview Nuclear Fuel Storage and Transportation Planning Project Overview Nuclear Fuel Storage and Transportation Planning Project...

34

Fuel Cycle Options for Optimized Recycling of Nuclear Fuel  

E-Print Network (OSTI)

The reduction of transuranic inventories of spent nuclear fuel depends upon the deployment of advanced fuels that can be loaded with recycled transuranics (TRU), and the availability of facilities to separate and reprocess ...

Aquien, A.

35

IAEA reorganizes nuclear information services  

SciTech Connect

As part of an overall restructuring of the International Atomic Energy Agency's Department of Nuclear Energy, the agency has established the Nuclear Information Section (NIS). The restructuring, recently announced by IAEA Director General Yukiya Amano, also includes the creation of a separate Nuclear Knowledge Management (NKM) Section, as demand for assistance in this area is growing among member countries. According to the NIS Web site, 'This restructuring and the creation of the NIS provides an opportunity for further enhancing existing information products and services and introducing new ones-all with an eye towards advancing higher organizational efficiency and effectiveness.'

Levine, E.

2012-08-15T23:59:59.000Z

36

Environmental Program Services Contract | National Nuclear Security...  

National Nuclear Security Administration (NNSA)

Services Contract Environmental Program Services Contract Welcome to the Department of Energy (DOE), National Nuclear Security Administration (NNSA) webpage for the Nevada Field...

37

EM Safely and Efficiently Manages Spent Nuclear Fuel | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services » Waste Management » Nuclear Materials & Waste » EM Services » Waste Management » Nuclear Materials & Waste » EM Safely and Efficiently Manages Spent Nuclear Fuel EM Safely and Efficiently Manages Spent Nuclear Fuel Dry storage casks at Idaho National Laboratory can safely house spent nuclear fuel for decades. Dry storage casks at Idaho National Laboratory can safely house spent nuclear fuel for decades. EM's mission is to safely and efficiently manage its spent nuclear fuel and prepare it for disposal in a geologic repository. Previously, the Office of Environmental Management's (EM) mission had included the safe and efficient management of its spent nuclear fuel (SNF) and preparation for its disposal in a geologic repository. However, in May 2009, the planned geologic repository at Yucca Mountain was cancelled. The

38

Nuclear Fuel Cycle | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cycle Cycle Nuclear Fuel Cycle This is an illustration of a nuclear fuel cycle that shows the required steps to process natural uranium from ore for preparation for fuel to be loaded in nuclear reactors. This is an illustration of a nuclear fuel cycle that shows the required steps to process natural uranium from ore for preparation for fuel to be loaded in nuclear reactors. The mission of NE-54 is primarily focused on activities related to the front end of the nuclear fuel cycle which includes mining, milling, conversion, and enrichment. Uranium Mining Both "conventional" open pit, underground mining, and in situ techniques are used to recover uranium ore. In general, open pit mining is used where deposits are close to the surface and underground mining is used

39

Nuclear core and fuel assemblies  

DOE Patents (OSTI)

A fast flux nuclear core of a plurality of rodded, open-lattice assemblies having a rod pattern rotated relative to a rod support structure pattern. Elongated fuel rods are oriented on a triangular array and laterally supported by grid structures positioned along the length of the assembly. Initial inter-assembly contact is through strongbacks at the corners of the support pattern and peripheral fuel rods between adjacent assemblies are nested so as to maintain a triangular pitch across a clearance gap between the other portions of adjacent assemblies. The rod pattern is rotated relative to the strongback support pattern by an angle .alpha. equal to sin .sup.-1 (p/2c), where p is the intra-assembly rod pitch and c is the center-to-center spacing among adjacent assemblies.

Downs, Robert E. (Monroeville, PA)

1981-01-01T23:59:59.000Z

40

Examining 239Pu and 240Pu Nuclear Resonance Fluorescence Measurements on Spent Fuel for Nuclear Safeguards  

E-Print Network (OSTI)

on Spent Fuel for Nuclear Safeguards Brian J. Quiter, ?resonances on nuclear safeguards measurements will be

Quiter, Brian

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Spent Nuclear Fuel (SNF) Project Execution Plan  

SciTech Connect

The Spent Nuclear Fuel (SNF) Project supports the Hanford Site Mission to cleanup the Site by providing safe, economic, environmentally sound management of Site spent nuclear fuel in a manner that reduces hazards by staging it to interim onsite storage and deactivates the 100 K Area facilities.

LEROY, P.G.

2000-11-03T23:59:59.000Z

42

Uranium to Electricity: The Chemistry of the Nuclear Fuel Cycle  

Science Journals Connector (OSTI)

The nuclear fuel cycle consists of a series of industrial processes that produce fuel for the production of electricity in nuclear reactors, use the fuel to generate electricity, and subsequently manage the spent reactor fuel. While the physics and ...

Frank A. Settle

2009-03-01T23:59:59.000Z

43

Mississippi Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","1,251",8.0,"9,643",17.7 "Coal","2,526",16.1,"13,629",25.0 "Natural Gas","11,640",74.2,"29,619",54.4 "Other1",4,"*",10,"*" "Other Renewable1",235,1.5,"1,504",2.8 "Petroleum",35,0.2,81,0.1 "Total","15,691",100.0,"54,487",100.0 "1Municipal Solid Waste net generation is allocated according to the biogenic and non-biogenic components of the fuel; however, all Municipal Solid Waste summer capacity is classified as Renewable."

44

Iowa Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear",601,4.1,"4,451",7.7 "Coal","6,956",47.7,"41,283",71.8 "Hydro and Pumped Storage",144,1.0,948,1.6 "Natural Gas","2,299",15.8,"1,312",2.3 "Other Renewable1","3,584",24.6,"9,360",16.3 "Petroleum","1,007",6.9,154,0.3 "Total","14,592",100.0,"57,509",100.0 "1Municipal Solid Waste net generation is allocated according to the biogenic and non-biogenic components of the fuel; however, all Municipal Solid Waste summer capacity is classified as Renewable."

45

Vermont Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear",620,55.0,"4,782",72.2 "Hydro and Pumped Storage",324,28.7,"1,347",20.3 "Natural Gas","-","-",4,0.1 "Other Renewable1",84,7.5,482,7.3 "Petroleum",100,8.9,5,0.1 "Total","1,128",100.0,"6,620",100.0 "1Municipal Solid Waste net generation is allocated according to the biogenic and non-biogenic components of the fuel; however, all Municipal Solid Waste summer capacity is classified as Renewable."

46

Ohio Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","2,134",6.5,"15,805",11.0 "Coal","21,360",64.6,"117,828",82.1 "Hydro and Pumped Storage",101,0.3,429,0.3 "Natural Gas","8,203",24.8,"7,128",5.0 "Other1",123,0.4,266,0.2 "Other Renewable1",130,0.4,700,0.5 "Petroleum","1,019",3.1,"1,442",1.0 "Total","33,071",100.0,"143,598",100.0 "1Municipal Solid Waste net generation is allocated according to the biogenic and non-biogenic components of the fuel; however, all Municipal Solid Waste summer capacity is classified as Renewable."

47

Maryland Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","1,705",13.6,"13,994",32.1 "Coal","4,886",39.0,"23,668",54.3 "Hydro and Pumped Storage",590,4.7,"1,667",3.8 "Natural Gas","2,041",16.3,"2,897",6.6 "Other1",152,1.2,485,1.1 "Other Renewable1",209,1.7,574,1.3 "Petroleum","2,933",23.4,322,0.7 "Total","12,516",100.0,"43,607",100.0 "1Municipal Solid Waste net generation is allocated according to the biogenic and non-biogenic components of the fuel; however, all Municipal Solid Waste summer capacity is classified as Renewable."

48

Kansas Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","1,160",9.2,"9,556",19.9 "Coal","5,179",41.3,"32,505",67.8 "Hydro and Pumped Storage",3,"*",13,"*" "Natural Gas","4,573",36.5,"2,287",4.8 "Other Renewable1","1,079",8.6,"3,459",7.2 "Petroleum",550,4.4,103,0.2 "Total","12,543",100.0,"47,924",100.0 "1Municipal Solid Waste net generation is allocated according to the biogenic and non-biogenic components of the fuel; however, all Municipal Solid Waste summer capacity is classified as Renewable."

49

Connecticut Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","2,103",25.4,"16,750",50.2 "Coal",564,6.8,"2,604",7.8 "Hydro and Pumped Storage",151,1.8,400,1.2 "Natural Gas","2,292",27.7,"11,716",35.1 "Other1",27,0.3,730,2.2 "Other Renewable1",159,1.9,740,2.2 "Petroleum","2,989",36.1,409,1.2 "Total","8,284",100.0,"33,350",100.0 "1Municipal Solid Waste net generation is allocated according to the biogenic and non-biogenic components of the fuel; however, all Municipal Solid Waste summer capacity is classified as Renewable."

50

Nebraska Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","1,245",15.8,"11,054",30.2 "Coal","3,932",50.0,"23,363",63.8 "Hydro and Pumped Storage",278,3.5,"1,314",3.6 "Natural Gas","1,849",23.5,375,1.0 "Other Renewable1",165,2.1,493,1.3 "Petroleum",387,4.9,31,0.1 "Total","7,857",100.0,"36,630",100.0 "1Municipal Solid Waste net generation is allocated according to the biogenic and non-biogenic components of the fuel; however, all Municipal Solid Waste summer capacity is classified as Renewable."

51

Nuclear Fuels Storage and Transportation Planning Project (NFST...  

Office of Environmental Management (EM)

Nuclear Fuels Storage and Transportation Planning Project (NFST) Program Status Nuclear Fuels Storage and Transportation Planning Project (NFST) Program Status Presentation made by...

52

2008 DOE Spent Nuclear Fuel and High Level Waste Inventory  

NLE Websites -- All DOE Office Websites (Extended Search)

Management >> National Spent Nuclear Fuel INL Logo Search 2008 DOE Spent Nuclear Fuel and High Level Waste Inventory Content Goes Here Skip Navigation Links Home Newsroom About INL...

53

Department of Energy Awards $15 Million for Nuclear Fuel Cycle...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Million for Nuclear Fuel Cycle Technology Research and Development Department of Energy Awards 15 Million for Nuclear Fuel Cycle Technology Research and Development August 1,...

54

Used Nuclear Fuel Loading and Structural Performance Under Normal...  

Office of Environmental Management (EM)

Used Nuclear Fuel Loading and Structural Performance Under Normal Conditions of Transport - Modeling, Simulation and Experimental Integration RD&D Plan Used Nuclear Fuel Loading...

55

Fuel handling apparatus for a nuclear reactor  

DOE Patents (OSTI)

Fuel handling apparatus for transporting fuel elements into and out of a nuclear reactor and transporting them within the reactor vessel extends through a penetration in the side of the reactor vessel. A lateral transport device carries the fuel elements laterally within the vessel and through the opening in the side of the vessel, and a reversible lifting device raises and lowers the fuel elements. In the preferred embodiment, the lifting device is supported by a pair of pivot arms.

Hawke, Basil C. (Solana Beach, CA)

1987-01-01T23:59:59.000Z

56

Simulated nuclear reactor fuel assembly  

DOE Patents (OSTI)

An apparatus for electrically simulating a nuclear reactor fuel assembly. It includes a heater assembly having a top end and a bottom end and a plurality of concentric heater tubes having electrical circuitry connected to a power source, and radially spaced from each other. An outer target tube and an inner target tube is concentric with the heater tubes and with each other, and the outer target tube surrounds and is radially spaced from the heater tubes. The inner target tube is surrounded by and radially spaced from the heater tubes and outer target tube. The top of the assembly is generally open to allow for the electrical power connection to the heater tubes, and the bottom of the assembly includes means for completing the electrical circuitry in the heater tubes to provide electrical resistance heating to simulate the power profile in a nuclear reactor. The embedded conductor elements in each heater tube is split into two halves for a substantial portion of its length and provided with electrical isolation such that each half of the conductor is joined at one end and is not joined at the other end.

Berta, V.T.

1993-04-06T23:59:59.000Z

57

Fuel cycle options for optimized recycling of nuclear fuel  

E-Print Network (OSTI)

The accumulation of transuranic inventories in spent nuclear fuel depends on both deployment of advanced reactors that can be loaded with recycled transuranics (TRU), and on availability of the facilities that separate and ...

Aquien, Alexandre

2006-01-01T23:59:59.000Z

58

Pyrochemical Treatment of Spent Nuclear Fuel  

SciTech Connect

Over the last 10 years, pyrochemical treatment of spent nuclear fuel has progressed from demonstration activities to engineering-scale production operations. As part of the Advanced Fuel Cycle Initiative within the U.S. Department of Energy’s Office of Nuclear Energy, Science and Technology, pyrochemical treatment operations are being performed as part of the treatment of fuel from the Experimental Breeder Reactor II at the Idaho National Laboratory. Integral to these treatment operations are research and development activities that are focused on scaling further the technology, developing and implementing process improvements, qualifying the resulting high-level waste forms, and demonstrating the overall pyrochemical fuel cycle.

K. M. Goff; K. L. Howden; G. M. Teske; T. A. Johnson

2005-10-01T23:59:59.000Z

59

Overview of the nuclear fuel cycle  

SciTech Connect

The use of nuclear reactors to provide electrical energy has shown considerable growth since the first nuclear plant started commercial operation in the mid 1950s. Although the main purpose of this paper is to review the fuel cycle capabilities in the United States, the introduction is a brief review of the types of nuclear reactors in use and the world-wide nuclear capacity.

Leuze, R.E.

1982-01-01T23:59:59.000Z

60

Nuclear Fuel Cycle | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Fuel Cycle Fuel Cycle Nuclear Fuel Cycle GC-52 provides legal advice to DOE regarding research and development of nuclear fuel and waste management technologies that meet the nation's energy supply, environmental, and energy security needs. GC-52 also advises DOE on issues involving support for international fuel cycle initiatives aimed at advancing a common vision of the necessity of the expansion of nuclear energy for peaceful purposes worldwide in a safe and secure manner. In addition, GC-52 provides legal advice to DOE regarding the management and disposition of excess uranium in DOE's uranium stockpile. GC-52 attorneys participate in meetings of DOE's Uranium Inventory Management Coordinating Committee and provide advice on compliance with statutory requirements for the sale or transfer of uranium.

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Thermodynamics of high-temperature nuclear fuel  

Science Journals Connector (OSTI)

A method for performing a thermodynamic analysis of the high-temperature nuclear fuel using the ASTA computer program is substantiated. Calculations of the chemical composition and pressure of the gas phase of...

I. A. Belov; A. S. Ivanov

62

Chemistry of nuclear fuel reprocessing: Current status  

Science Journals Connector (OSTI)

Current status on the chemical aspects of nuclear fuel reprocessing is presented with special emphasis on the Purex process which continues to be the process of choice for the last four decades. Better deconta...

D. D. Sood; S. K. Patil

1996-03-01T23:59:59.000Z

63

Transuranium Elements in the Nuclear Fuel Cycle  

Science Journals Connector (OSTI)

Transuranium elements, neptunium, plutonium, americium, and curium, are formed via neutron capture processes of actinides, and are mainly by-products of fuel irradiation during the operation of a nuclear react...

Thomas Fanghänel; Jean-Paul Glatz; Rudy J. M. Konings…

2010-01-01T23:59:59.000Z

64

Fuel availability in nuclear power.  

E-Print Network (OSTI)

?? Nuclear power is in focus of attention due to several factors these days and the expression “nuclear renaissance” is getting well known. However, concerned… (more)

Söderlund, Karl

2009-01-01T23:59:59.000Z

65

Fresh nuclear fuel measurements at Ukrainian nuclear power plants  

SciTech Connect

In 2005, the Provisions on Nuclear Material Measurement System was enacted in Ukraine as an important regulatory driver to support international obligations in nuclear safeguards and nonproliferation. It defines key provisions and requirements for material measurement and measurement control programs to ensure the quality and reliability of measurement data within the framework of the State MC&A System. Implementing the Provisions requires establishing a number of measurement techniques for both fresh and spent nuclear fuel for various types of Ukrainian reactors. Our first efforts focused on measurements of fresh nuclear fuel from a WWR-1000 power reactor.

Kuzminski, Jozef [Los Alamos National Laboratory; Ewing, Tom [ANL; Dickman, Debbie [PNNL; Gavrilyuk, Victor [UKRAINE; Drapey, Sergey [UKRAINE; Kirischuk, Vladimir [UKRAINE; Strilchuk, Nikolay [UKRAINE

2009-01-01T23:59:59.000Z

66

Nuclear Fuel Cycle and Waste Management Technologies - Nuclear Engineering  

NLE Websites -- All DOE Office Websites (Extended Search)

Nuclear Fuel Cycle and Nuclear Fuel Cycle and Waste Management Technologies Nuclear Fuel Cycle and Waste Management Technologies Overview Modeling and analysis Unit Process Modeling Mass Tracking System Software Waste Form Performance Modeling Safety Analysis, Hazard and Risk Evaluations Development, Design, Operation Overview Systems and Components Development Expertise System Engineering Design Other Major Programs Work with Argonne Contact us For Employees Site Map Help Join us on Facebook Follow us on Twitter NE Division on Flickr Nuclear Fuel Cycle and Waste Management Technologies Overview Bookmark and Share Much of the NE Division's research is directed toward developing software and performing analyses, system engineering design, and experiments to support the demonstration and optimization of the electrometallurgical

67

Nuclear power and the fuel cycle  

Science Journals Connector (OSTI)

Due to rising energy costs and climate concerns, nuclear power is once again being seriously considered as an energy source by several countries. This revival of nuclear power is closely linked with the choice of fuel cycles available, and the intentions of countries pursuing nuclear power are likely to be, correctly or incorrectly, judged by the choice of fuel cycle they make. The needs and constraints of the emerging nuclear powers may, however, be different from the expectations of a segment of the world community. If this potential growth in nuclear power is not to be stifled, it is imperative that a climate of mutual trust is developed respecting every country's right to develop peaceful uses of nuclear power without leading to an atmosphere of mistrust regarding the 'intentions' behind the pursuit of peaceful nuclear power. While it will be a near impossibility to completely decouple the peaceful uses of nuclear power from its more destructive applications, it is important that aspiring countries develop a clear and transparent process. Technology-supplier countries also need to develop and follow clear and consistent treaties and national policies, avoiding ad hoc country-specific arrangements. We review here the state of interest in nuclear power and current policies and discuss fuel cycle options that may pave the way for the future growth of nuclear power.

Rizwan-uddin

2010-01-01T23:59:59.000Z

68

Nuclear Fuels & Materials Spotlight Volume 4  

SciTech Connect

As the nation's nuclear energy laboratory, Idaho National Laboratory brings together talented people and specialized nuclear research capability to accomplish our mission. This edition of the Nuclear Fuels and Materials Division Spotlight provides an overview of some of our recent accomplishments in research and capability development. These accomplishments include: • The first identification of silver and palladium migrating through the SiC layer in TRISO fuel • A description of irradiation assisted stress corrosion testing capabilities that support commercial light water reactor life extension • Results of high-temperature safety testing on coated particle fuels irradiated in the ATR • New methods for testing the integrity of irradiated plate-type reactor fuel • Description of a 'Smart Fuel' concept that wirelessly provides real time information about changes in nuclear fuel properties and operating conditions • Development and testing of ultrasonic transducers and real-time flux sensors for use inside reactor cores, and • An example of a capsule irradiation test. Throughout Spotlight, you'll find examples of productive partnerships with academia, industry, and government agencies that deliver high-impact outcomes. The work conducted at Idaho National Laboratory helps to spur innovation in nuclear energy applications that drive economic growth and energy security. We appreciate your interest in our work here at INL, and hope that you find this issue informative.

I. J. van Rooyen,; T. M. Lillo; Y. Q. WU; P.A. Demkowicz; L. Scott; D.M. Scates; E. L. Reber; J. H. Jackson; J. A. Smith; D.L. Cottle; B.H. Rabin; M.R. Tonks; S.B. Biner; Y. Zhang; R.L. Williamson; S.R. Novascone; B.W. Spencer; J.D. Hales; D.R. Gaston; C.J. Permann; D. Anders; S.L. Hayes; P.C. Millett; D. Andersson; C. Stanek; R. Ali; S.L. Garrett; J.E. Daw; J.L. Rempe; J. Palmer; B. Tittmann; B. Reinhardt; G. Kohse; P. Ramuhali; H.T. Chien; T. Unruh; B.M. Chase; D.W. Nigg; G. Imel; J. T. Harris

2014-04-01T23:59:59.000Z

69

Quantitative assessment of proposals on assurance of nuclear fuel supply  

SciTech Connect

The assurance of nuclear fuel supply has the potential to contribute to balancing peaceful use of nuclear power and nuclear nonproliferation. 5 proposals which provide the backup supply of the enrichment service in case of supply disruption, are investigated in this study. We investigated the 20 NPT countries which are non-nuclear-weapon states and possess operable commercial LWRs in October 2012 as potential participants for each proposal. As a result of literature researching, we have extracted factors that can be considered as important for a country to participate or not participate in the assurance of nuclear fuel supply. Then we have computed incentive and disincentive parameters for each country. The results show that the participation expectancy decreases in the order of IAEA Fuel Bank proposal, Russian LEU Reserve proposal, AFS proposal, WNA proposal and 6-Country proposal. The 'IAEA fuel bank proposal' would be triggered in case of the supply disruption which cannot be solved by the market mechanism and bilateral agreements.

Tanaka, T.; Kuno, Y.; Tanaka, S. [University of Tokyo, 7-3-1 Hongou, Bunkyou-ku, Tokyo 112-0005 (Japan)

2013-07-01T23:59:59.000Z

70

Technology Insights and Perspectives for Nuclear Fuel Cycle Concepts  

SciTech Connect

The following report provides a rich resource of information for exploring fuel cycle characteristics. The most noteworthy trends can be traced back to the utilization efficiency of natural uranium resources. By definition, complete uranium utilization occurs only when all of the natural uranium resource can be introduced into the nuclear reactor long enough for all of it to undergo fission. Achieving near complete uranium utilization requires technologies that can achieve full recycle or at least nearly full recycle of the initial natural uranium consumed from the Earth. Greater than 99% of all natural uranium is fertile, and thus is not conducive to fission. This fact requires the fuel cycle to convert large quantities of non-fissile material into fissile transuranics. Step increases in waste benefits are closely related to the step increase in uranium utilization going from non-breeding fuel cycles to breeding fuel cycles. The amount of mass requiring a disposal path is tightly coupled to the quantity of actinides in the waste stream. Complete uranium utilization by definition means that zero (practically, near zero) actinide mass is present in the waste stream. Therefore, fuel cycles with complete (uranium and transuranic) recycle discharge predominately fission products with some actinide process losses. Fuel cycles without complete recycle discharge a much more massive waste stream because only a fraction of the initial actinide mass is burned prior to disposal. In a nuclear growth scenario, the relevant acceptable frequency for core damage events in nuclear reactors is inversely proportional to the number of reactors deployed in a fuel cycle. For ten times the reactors in a fleet, it should be expected that the fleet-average core damage frequency be decreased by a factor of ten. The relevant proliferation resistance of a fuel cycle system is enhanced with: decreasing reliance on domestic fuel cycle services, decreasing adaptability for technology misuse, enablement of material accountability, and decreasing material attractiveness.

S. Bays; S. Piet; N. Soelberg; M. Lineberry; B. Dixon

2010-09-01T23:59:59.000Z

71

Fuel Cycle Science & Technology | Nuclear Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Fuel Cycle Systems Radiochemical Separation & Processing Recycle & Waste Management Uranium Enrichment Used Nuclear Fuel Storage, Transportation, and Disposal Fusion Nuclear Science Isotope Development and Production Nuclear Security Science & Technology Nuclear Systems Modeling, Simulation & Validation Nuclear Systems Technology Reactor Technology Nuclear Science Home | Science & Discovery | Nuclear Science | Research Areas | Fuel Cycle Science & Technology SHARE Fuel Cycle Science and Technology The ORNL expertise and experience across the entire nuclear fuel cycle is underpinned by extensive facilities and a comprehensive modeling and simulation capability ORNL supports the understanding, development, evaluation and deployment of

72

Alternative Fuels Data Center: Semi Service Outfits Replica Batmobile to  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Semi Service Outfits Semi Service Outfits Replica Batmobile to Run on Natural Gas to someone by E-mail Share Alternative Fuels Data Center: Semi Service Outfits Replica Batmobile to Run on Natural Gas on Facebook Tweet about Alternative Fuels Data Center: Semi Service Outfits Replica Batmobile to Run on Natural Gas on Twitter Bookmark Alternative Fuels Data Center: Semi Service Outfits Replica Batmobile to Run on Natural Gas on Google Bookmark Alternative Fuels Data Center: Semi Service Outfits Replica Batmobile to Run on Natural Gas on Delicious Rank Alternative Fuels Data Center: Semi Service Outfits Replica Batmobile to Run on Natural Gas on Digg Find More places to share Alternative Fuels Data Center: Semi Service Outfits Replica Batmobile to Run on Natural Gas on AddThis.com...

73

Alternative Fuels Data Center: Choice Environmental Services Chooses  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Choice Environmental Choice Environmental Services Chooses Natural Gas to someone by E-mail Share Alternative Fuels Data Center: Choice Environmental Services Chooses Natural Gas on Facebook Tweet about Alternative Fuels Data Center: Choice Environmental Services Chooses Natural Gas on Twitter Bookmark Alternative Fuels Data Center: Choice Environmental Services Chooses Natural Gas on Google Bookmark Alternative Fuels Data Center: Choice Environmental Services Chooses Natural Gas on Delicious Rank Alternative Fuels Data Center: Choice Environmental Services Chooses Natural Gas on Digg Find More places to share Alternative Fuels Data Center: Choice Environmental Services Chooses Natural Gas on AddThis.com... Oct. 11, 2011 Choice Environmental Services Chooses Natural Gas " In our bidding for residential collection contracts, we realized that the

74

Nuclear Fuel Facts: Uranium | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Uranium Management and Uranium Management and Policy » Nuclear Fuel Facts: Uranium Nuclear Fuel Facts: Uranium Nuclear Fuel Facts: Uranium Uranium is a silvery-white metallic chemical element in the periodic table, with atomic number 92. It is assigned the chemical symbol U. A uranium atom has 92 protons and 92 electrons, of which 6 are valence electrons. Uranium has the highest atomic weight (19 kg m) of all naturally occurring elements. Uranium occurs naturally in low concentrations in soil, rock and water, and is commercially extracted from uranium-bearing minerals such as uraninite. Uranium ore can be mined from open pits or underground excavations. The ore can then be crushed and treated at a mill to separate the valuable uranium from the ore. Uranium may also be dissolved directly from the ore deposits

75

International Nuclear Fuel Cycle Fact Book  

SciTech Connect

As the US Department of Energy (DOE) and DOE contractors have become increasingly involved with other nations in nuclear fuel cycle and waste management cooperative activities, a need exists costs for a ready source of information concerning foreign fuel cycle programs, facilities, and personnel. This Fact Book has been compiled to meet that need. The information contained in the International Nuclear Fuel Cycle Fact Book has been obtained from many unclassified sources: nuclear trade journals and newsletters; reports of foreign visits and visitors; CEC, IAEA, and OECD/NMEA activities reports; and proceedings of conferences and workshops. The data listed typically do not reflect any single source but frequently represent a consolidation/combination of information.

Leigh, I.W.

1992-05-01T23:59:59.000Z

76

Safeguarding and Protecting the Nuclear Fuel Cycle  

SciTech Connect

International safeguards as applied by the International Atomic Energy Agency (IAEA) are a vital cornerstone of the global nuclear nonproliferation regime - they protect against the peaceful nuclear fuel cycle becoming the undetected vehicle for nuclear weapons proliferation by States. Likewise, domestic safeguards and nuclear security are essential to combating theft, sabotage, and nuclear terrorism by non-State actors. While current approaches to safeguarding and protecting the nuclear fuel cycle have been very successful, there is significant, active interest to further improve the efficiency and effectiveness of safeguards and security, particularly in light of the anticipated growth of nuclear energy and the increase in the global threat environment. This article will address two recent developments called Safeguards-by-Design and Security-by-Design, which are receiving increasing broad international attention and support. Expected benefits include facilities that are inherently more economical to effectively safeguard and protect. However, the technical measures of safeguards and security alone are not enough - they must continue to be broadly supported by dynamic and adaptive nonproliferation and security regimes. To this end, at the level of the global fuel cycle architecture, 'nonproliferation and security by design' remains a worthy objective that is also the subject of very active, international focus.

Trond Bjornard; Humberto Garcia; William Desmond; Scott Demuth

2010-11-01T23:59:59.000Z

77

Double-clad nuclear fuel safety rod  

DOE Patents (OSTI)

A device for shutting down a nuclear reactor during an undercooling or overpower event, whether or not the reactor's scram system operates properly. This is accomplished by double-clad fuel safety rods positioned at various locations throughout the reactor core, wherein melting of a secondary internal cladding of the rod allows the fuel column therein to shift from the reactor core to place the reactor in a subcritical condition.

McCarthy, William H. (Los Altos, CA); Atcheson, Donald B. (Cupertino, CA); Vaidyanathan, Swaminathan (San Jose, CA)

1984-01-01T23:59:59.000Z

78

Nuclear fuel elements made from nanophase materials  

DOE Patents (OSTI)

A nuclear reactor core fuel element is composed of nanophase high temperature materials. An array of the fuel elements in rod form are joined in an open geometry fuel cell that preferably also uses such nanophase materials for the cell structures. The particular high temperature nanophase fuel element material must have the appropriate mechanical characteristics to avoid strain related failure even at high temperatures, in the order of about 3000 F. Preferably, the reactor type is a pressurized or boiling water reactor and the nanophase material is a high temperature ceramic or ceramic composite. Nanophase metals, or nanophase metals with nanophase ceramics in a composite mixture, also have desirable characteristics, although their temperature capability is not as great as with all-ceramic nanophase material. Combinations of conventional or nanophase metals and conventional or nanophase ceramics can be employed as long as there is at least one nanophase material in the composite. The nuclear reactor so constructed has a number of high strength fuel particles, a nanophase structural material for supporting a fuel rod at high temperature, a configuration to allow passive cooling in the event of a primary cooling system failure, an ability to retain a coolable geometry even at high temperatures, an ability to resist generation of hydrogen gas, and a configuration having good nuclear, corrosion, and mechanical characteristics. 5 figs.

Heubeck, N.B.

1998-09-08T23:59:59.000Z

79

Computational Design of Advanced Nuclear Fuels  

SciTech Connect

The objective of the project was to develop a method for theoretical understanding of nuclear fuel materials whose physical and thermophysical properties can be predicted from first principles using a novel dynamical mean field method for electronic structure calculations. We concentrated our study on uranium, plutonium, their oxides, nitrides, carbides, as well as some rare earth materials whose 4f eletrons provide a simplified framework for understanding complex behavior of the f electrons. We addressed the issues connected to the electronic structure, lattice instabilities, phonon and magnon dynamics as well as thermal conductivity. This allowed us to evaluate characteristics of advanced nuclear fuel systems using computer based simulations and avoid costly experiments.

Savrasov, Sergey; Kotliar, Gabriel; Haule, Kristjan

2014-06-03T23:59:59.000Z

80

Michigan Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","3,947",13.2,"29,625",26.6 "Coal","11,531",38.7,"65,604",58.8 "Hydro and Pumped...

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Minnesota Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","1,594",10.8,"13,478",25.1 "Coal","4,789",32.5,"28,083",52.3 "Hydro and Pumped...

82

Wisconsin Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","1,584",8.9,"13,281",20.7 "Coal","8,063",45.2,"40,169",62.5 "Hydro and Pumped...

83

Washington Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","1,097",3.6,"9,241",8.9 "Coal","1,340",4.4,"8,527",8.2 "Hydro and Pumped...

84

Virginia Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","3,501",14.5,"26,572",36.4 "Coal","5,868",24.3,"25,459",34.9 "Hydro and Pumped...

85

A Characteristics-Based Approach to Radioactive Waste Classification in Advanced Nuclear Fuel Cycles  

E-Print Network (OSTI)

Nuclear   Fuel”,   Nuclear  Engineering  and  Technology,  in   Engineering  -­?  Nuclear  Engineering   and  the  in  Engineering  -­?  Nuclear  Engineering   and  the  

Djokic, Denia

2013-01-01T23:59:59.000Z

86

Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs Draft Environmental Impact Statement. Volume 1, Appendix D, Part B: Naval spent nuclear fuel management  

SciTech Connect

This volume contains the following attachments: transportation of Naval spent nuclear fuel; description of Naval spent nuclear receipt and handling at the Expended Core Facility at the Idaho National Engineering Laboratory; comparison of storage in new water pools versus dry container storage; description of storage of Naval spent nuclear fuel at servicing locations; description of receipt, handling, and examination of Naval spent nuclear fuel at alternate DOE facilities; analysis of normal operations and accident conditions; and comparison of the Naval spent nuclear fuel storage environmental assessment and this environmental impact statement.

Not Available

1994-06-01T23:59:59.000Z

87

Nuclear Fuels Storage & Transportation Planning Project Documents |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fuel Cycle Technologies » Nuclear Fuels Storage & Fuel Cycle Technologies » Nuclear Fuels Storage & Transportation Planning Project » Nuclear Fuels Storage & Transportation Planning Project Documents Nuclear Fuels Storage & Transportation Planning Project Documents September 30, 2013 Preliminary Evaluation of Removing Used Nuclear Fuel From Shutdown Sites In January 2013, the Department of Energy issued the Strategy for the Management and Disposal of Used Nuclear Fuel and High-Level Radioactive Waste. Among the elements contained in this strategy is an initial focus on accepting used nuclear fuel from shutdown reactor sites. February 22, 2013 Public Preferences Related to Consent-Based Siting of Radioactive Waste Management Facilities for Storage and Disposal This report provides findings from a set of social science studies

88

Seawater Enhances the Corrosion of Nuclear Fuel Rods | Photosynthetic...  

NLE Websites -- All DOE Office Websites (Extended Search)

Seawater Enhances the Corrosion of Nuclear Fuel Rods April 19, 2012 Seawater Enhances the Corrosion of Nuclear Fuel Rods PARC Post Doc Anne-Marie Carey is featured in DOE Frontiers...

89

Strategy for the Management and Disposal of Used Nuclear Fuel...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Strategy for the Management and Disposal of Used Nuclear Fuel and High-Level Radioactive Waste Strategy for the Management and Disposal of Used Nuclear Fuel and High-Level...

90

Surrogate Spent Nuclear Fuel Vibration Integrity Investigation  

SciTech Connect

Transportation packages for spent nuclear fuel (SNF) must meet safety requirements under normal and accident conditions as specified by federal regulations. During transportation, SNF experiences unique conditions and challenges to cladding integrity due to the vibrational and impact loading encountered during road or rail shipment. ORNL has been developing testing capabilities that can be used to improve our understanding of the impacts of vibration loading on SNF integrity, especially for high burn-up SNF in normal transportation operation conditions. This information can be used to meet nuclear industry and U.S. Nuclear Regulatory Commission needs in the area of safety of SNF storage and transportation operations.

Wang, Jy-An John [ORNL; Wang, Hong [ORNL; Bevard, Bruce Balkcom [ORNL; Howard, Rob L [ORNL

2014-01-01T23:59:59.000Z

91

Spent Nuclear Fuel Alternative Technology Decision Analysis  

SciTech Connect

The Westinghouse Savannah River Company (WSRC) made a FY98 commitment to the Department of Energy (DOE) to recommend a technology for the disposal of aluminum-based spent nuclear fuel (SNF) at the Savannah River Site (SRS). The two technologies being considered, direct co-disposal and melt and dilute, had been previously selected from a group of eleven potential SNF management technologies by the Research Reactor Spent Nuclear Fuel Task Team chartered by the DOE''s Office of Spent Fuel Management. To meet this commitment, WSRC organized the SNF Alternative Technology Program to further develop the direct co-disposal and melt and dilute technologies and ultimately provide a WSRC recommendation to DOE on a preferred SNF alternative management technology.

Shedrow, C.B.

1999-11-29T23:59:59.000Z

92

Simulations of Failure via Three-Dimensional Cracking in Fuel Cladding for Advanced Nuclear Fuels  

SciTech Connect

Enhancing performance of fuel cladding and duct alloys is a key means of increasing fuel burnup. This project will address the failure of fuel cladding via three-dimensional cracking models. Researchers will develop a simulation code for the failure of the fuel cladding and validate the code through experiments. The objective is to develop an algorithm to determine the failure of fuel cladding in the form of three-dimensional cracking due to prolonged exposure under varying conditions of pressure, temperature, chemical environment, and irradiation. This project encompasses the following tasks: 1. Simulate 3D crack initiation and growth under instantaneous and/or fatigue loads using a new variant of the material point method (MPM); 2. Simulate debonding of the materials in the crack path using cohesive elements, considering normal and shear traction separation laws; 3. Determine the crack propagation path, considering damage of the materials incorporated in the cohesive elements to allow the energy release rate to be minimized; 4. Simulate the three-dimensional fatigue crack growth as a function of loading histories; 5. Verify the simulation code by comparing results to theoretical and numerical studies available in the literature; 6. Conduct experiments to observe the crack path and surface profile in unused fuel cladding and validate against simulation results; and 7. Expand the adaptive mesh refinement infrastructure parallel processing environment to allow adaptive mesh refinement at the 3D crack fronts and adaptive mesh merging in the wake of cracks. Fuel cladding is made of materials such as stainless steels and ferritic steels with added alloying elements, which increase stability and durability under irradiation. As fuel cladding is subjected to water, chemicals, fission gas, pressure, high temperatures, and irradiation while in service, understanding performance is essential. In the fast fuel used in advanced burner reactors, simulations of the nuclear fuels are critical to understand the burnup, and thus the fuel efficiency.

Lu, Hongbing; Bukkapatnam, Satish; Harimkar, Sandip; Singh, Raman; Bardenhagen, Scott

2014-01-09T23:59:59.000Z

93

Alternative Fuels Data Center: Schwan's Home Service Delivers...  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Service Delivers With Propane-Powered Trucks to someone by E-mail Share Alternative Fuels Data Center: Schwan's Home Service Delivers With Propane-Powered Trucks on Facebook Tweet...

94

VISION - Verifiable Fuel Cycle Simulation of Nuclear Fuel Cycle Dynamics  

SciTech Connect

The U.S. DOE Advanced Fuel Cycle Initiative’s (AFCI) fundamental objective is to provide technology options that - if implemented - would enable long-term growth of nuclear power while improving sustainability and energy security. The AFCI organization structure consists of four areas; Systems Analysis, Fuels, Separations and Transmutations. The Systems Analysis Working Group is tasked with bridging the program technical areas and providing the models, tools, and analyses required to assess the feasibility of design and deployment options and inform key decision makers. An integral part of the Systems Analysis tool set is the development of a system level model that can be used to examine the implications of the different mixes of reactors, implications of fuel reprocessing, impact of deployment technologies, as well as potential "exit" or "off ramp" approaches to phase out technologies, waste management issues and long-term repository needs. The Verifiable Fuel Cycle Simulation Model (VISION) is a computer-based simulation model that allows performing dynamic simulations of fuel cycles to quantify infrastructure requirements and identify key trade-offs between alternatives. It is based on the current AFCI system analysis tool "DYMOND-US" functionalities in addition to economics, isotopic decay, and other new functionalities. VISION is intended to serve as a broad systems analysis and study tool applicable to work conducted as part of the AFCI and Generation IV reactor development studies.

Steven J. Piet; A. M. Yacout; J. J. Jacobson; C. Laws; G. E. Matthern; D. E. Shropshire

2006-02-01T23:59:59.000Z

95

Texas Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","4,966",4.6,"41,335",10.0 "Coal","22,335",20.6,"150,173",36.5 "Hydro and Pumped Storage",689,0.6,"1,262",0.3 "Natural Gas","69,291",64.0,"186,882",45.4 "Other1",477,0.4,"3,630",0.9 "Other Renewable1","10,295",9.5,"27,705",6.7 "Petroleum",204,0.2,708,0.2 "Total","108,258",100.0,"411,695",100.0

96

Pennsylvania Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","9,540",20.9,"77,828",33.9 "Coal","18,481",40.6,"110,369",48.0 "Hydro and Pumped Storage","2,268",5.0,"1,624",0.7 "Natural Gas","9,415",20.7,"33,718",14.7 "Other1",100,0.2,"1,396",0.6 "Other Renewable1","1,237",2.7,"4,245",1.8 "Petroleum","4,534",9.9,571,0.2 "Total","45,575",100.0,"229,752",100.0

97

California Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","4,390",6.5,"32,201",15.8 "Coal",374,0.6,"2,100",1.0 "Hydro and Pumped Storage","13,954",20.7,"33,260",16.3 "Natural Gas","41,370",61.4,"107,522",52.7 "Other1",220,0.3,"2,534",1.2 "Other Renewable1","6,319",9.4,"25,450",12.5 "Petroleum",701,1.0,"1,059",0.5 "Total","67,328",100.0,"204,126",100.0

98

Arizona Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (nw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear",3937,14.9,"31,200",27.9 "Coal","6,233",23.6,"43,644",39.1 "Hydro and Pumped Storage","2,937",11.1,"6,831",6.1 "Natural Gas","13,012",49.3,"29,676",26.6 "Other1","-","-",15,"*" "Other Renewable1",181,0.7,319,0.3 "Petroleum",93,0.4,66,0.1 "Total","26,392",100.0,"111,751",100.0

99

Louisiana Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","2,142",8.0,"18,639",18.1 "Coal","3,417",12.8,"23,924",23.3 "Hydro and Pumped Storage",192,0.7,"1,109",1.1 "Natural Gas","19,574",73.2,"51,344",49.9 "Other1",213,0.8,"2,120",2.1 "Other Renewable1",325,1.2,"2,468",2.4 "Petroleum",881,3.3,"3,281",3.2 "Total","26,744",100.0,"102,885",100.0

100

Illinois Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","11,441",25.9,"96,190",47.8 "Coal","15,551",35.2,"93,611",46.5 "Hydro and Pumped Storage",34,0.1,119,0.1 "Natural Gas","13,771",31.2,"5,724",2.8 "Other1",145,0.3,461,0.2 "Other Renewable1","2,078",4.7,"5,138",2.6 "Petroleum","1,106",2.5,110,0.1 "Total","44,127",100.0,"201,352",100.0

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Alabama Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","5,043",15.6,"37,941",24.9 "Coal","11,441",35.3,"63,050",41.4 "Hydro and Pumped Storage","3,272",10.1,"8,704",5.7 "Natural Gas","11,936",36.8,"39,235",25.8 "Other1",100,0.3,643,0.4 "Other Renewable1",583,1.8,"2,377",1.6 "Petroleum",43,0.1,200,0.1 "Total","32,417",100.0,"152,151",100.0

102

Florida Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (nw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","3,924",6.6,"23,936",10.4 "Coal","9,975",16.9,"59,897",26.1 "Hydro and Pumped Storage",55,0.1,177,0.1 "Natural Gas","31,563",53.4,"128,634",56.1 "Other1",544,0.9,"2,842",1.2 "Other Renewable1","1,053",1.8,"4,487",2.0 "Petroleum","12,033",20.3,"9,122",4.0 "Total","59,147",100.0,"229,096",100.0

103

Arkansas Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","1,835",11.5,"15,023",24.6 "Coal","4,535",28.4,"28,152",46.2 "Hydro and Pumped Storage","1,369",8.6,"3,658",6.0 "Natural Gas","7,894",49.4,"12,469",20.4 "Other1","-","-",28,"*" "Other Renewable1",326,2.0,"1,624",2.7 "Petroleum",22,0.1,45,0.1 "Total","15,981",100.0,"61,000",100.0

104

Missouri Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","1,190",5.5,"8,996",9.7 "Coal","12,070",55.5,"75,047",81.3 "Hydro and Pumped Storage","1,221",5.6,"2,427",2.6 "Natural Gas","5,579",25.7,"4,690",5.1 "Other1","-","-",39,"*" "Other Renewable1",466,2.1,988,1.1 "Petroleum","1,212",5.6,126,0.1 "Total","21,739",100.0,"92,313",100.0

105

Massachusetts Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, smmer capacity and net generation, by energy source, 2010" total electric power industry, smmer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear",685,5.0,"5,918",13.8 "Coal","1,669",12.2,"8,306",19.4 "Hydro and Pumped Storage","1,942",14.2,659,1.5 "Natural Gas","6,063",44.3,"25,582",59.8 "Other1",3,"*",771,1.8 "Other Renewable1",304,2.2,"1,274",3.0 "Petroleum","3,031",22.1,296,0.7 "Total","13,697",100.0,"42,805",100.0

106

Georgia Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","4,061",11.1,"33,512",24.4 "Coal","13,230",36.1,"73,298",53.3 "Hydro and Pumped Storage","3,851",10.5,"3,044",2.2 "Natural Gas","12,668",34.6,"23,884",17.4 "Other1","-","-",18,"*" "Other Renewable1",637,1.7,"3,181",2.3 "Petroleum","2,189",6.0,641,0.5 "Total","36,636",100.0,"137,577",100.0

107

Tennessee Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","3,401",15.9,"27,739",33.7 "Coal","8,805",41.1,"43,670",53.0 "Hydro and Pumped Storage","4,277",20.0,"7,416",9.0 "Natural Gas","4,655",21.7,"2,302",2.8 "Other1","-","-",16,"*" "Other Renewable1",222,1.0,988,1.2 "Petroleum",58,0.3,217,0.3 "Total","21,417",100.0,"82,349",100.0

108

Pyrochemical processing of DOE spent nuclear fuel  

SciTech Connect

A compact, efficient method for conditioning spent nuclear fuel is under development. This method, known as pyrochemical processing, or {open_quotes}pyroprocessing,{close_quotes} provides a separation of fission products from the actinide elements present in spent fuel and further separates pure uranium from the transuranic elements. The process can facilitate the timely and environmentally-sound treatment of the highly diverse collection of spent fuel currently in the inventory of the United States Department of Energy (DOE). The pyroprocess utilizes elevated-temperature processes to prepare spent fuel for fission product separation; that separation is accomplished by a molten salt electrorefining step that provides efficient (>99.9%) separation of transuranics. The resultant waste forms from the pyroprocess, are stable under envisioned repository environment conditions and highly leach-resistant. Treatment of any spent fuel type produces a set of common high-level waste forms, one a mineral and the other a metal alloy, that can be readily qualified for repository disposal and avoid the substantial costs that would be associated with the qualification of the numerous spent fuel types included in the DOE inventory.

Laidler, J.J.

1995-02-01T23:59:59.000Z

109

Preliminary Evaluation of Removing Used Nuclear Fuel From Shutdown Sites |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Evaluation of Removing Used Nuclear Fuel From Shutdown Evaluation of Removing Used Nuclear Fuel From Shutdown Sites Preliminary Evaluation of Removing Used Nuclear Fuel From Shutdown Sites In January 2013, the Department of Energy issued the Strategy for the Management and Disposal of Used Nuclear Fuel and High-Level Radioactive Waste. Among the elements contained in this strategy is an initial focus on accepting used nuclear fuel from shutdown reactor sites. This focus is consistent with the recommendations of the Blue Ribbon Commission on America's Nuclear Future, which identified removal of stranded used nuclear fuel at shutdown sites as a priority so that these sites may be completely decommissioned and put to other beneficial uses. Shutdown sites are defined as those commercial nuclear power reactor sites where the

110

A Critical Step Toward Sustainable Nuclear Fuel Disposal | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A Critical Step Toward Sustainable Nuclear Fuel Disposal A Critical Step Toward Sustainable Nuclear Fuel Disposal A Critical Step Toward Sustainable Nuclear Fuel Disposal January 26, 2012 - 2:30pm Addthis Secretary Chu Secretary Chu Former Secretary of Energy The Blue Ribbon Commission on America's Nuclear Future was formed at the direction of the President to conduct a comprehensive review of polices for managing the back end of the nuclear fuel cycle. If we are going to ensure that the United States remains at the forefront of nuclear safety and security, non-proliferation, and nuclear energy technology we must develop an effective strategy and workable plan for the safe and secure management and disposal of used nuclear fuel and nuclear waste. That is why I asked General Scowcroft and Representative Hamilton to draw on their

111

Nuclear Fuels Storage & Transportation Planning Project | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Nuclear Fuels Storage & Nuclear Fuels Storage & Transportation Planning Project Nuclear Fuels Storage & Transportation Planning Project Independent Spent Fuel Storage Installation (ISFSI) at the shutdown Connecticut Yankee site. The ISFSI includes 40 multi-purpose canisters, within vertical concrete storage casks, containing 1019 used nuclear fuel assemblies [412.3 metric ton heavy metal (MTHM)] and 3 canisters of greater-than-class-C (GTCC) low-level radioactive waste. Photo courtesy of Connecticut Yankee (http://www.connyankee.com/html/fuel_storage.html). Independent Spent Fuel Storage Installation (ISFSI) at the shutdown Connecticut Yankee site. The ISFSI includes 40 multi-purpose canisters, within vertical concrete storage casks, containing 1019 used nuclear fuel

112

EIS-0203: Spent Nuclear Fuel Management and Idaho National Engineering  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EIS-0203: Spent Nuclear Fuel Management and Idaho National EIS-0203: Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs EIS-0203: Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs SUMMARY This EIS considers programmatic (DOE-wide) alternative approaches to safely, efficiently, and responsibly manage existing and projected quantities of spent nuclear fuel until the year 2035. This amount of time may be required to make and implement a decision on the ultimate disposition of spent nuclear fuel. DOE's spent nuclear fuel responsibilities include fuel generated by DOE production, research, and development reactors; naval reactors; university and foreign research reactors; domestic non-DOE reactors such as those at the National Institute

113

Transportation capabilities study of DOE-owned spent nuclear fuel  

SciTech Connect

This study evaluates current capabilities for transporting spent nuclear fuel owned by the US Department of Energy. Currently licensed irradiated fuel shipping packages that have the potential for shipping the spent nuclear fuel are identified and then matched against the various spent nuclear fuel types. Also included are the results of a limited investigation into other certified packages and new packages currently under development. This study is intended to support top-level planning for the disposition of the Department of Energy`s spent nuclear fuel inventory.

Clark, G.L.; Johnson, R.A.; Smith, R.W. [Packaging Technology, Inc., Tacoma, WA (United States); Abbott, D.G.; Tyacke, M.J. [Lockheed Idaho Technologies Co., Idaho Falls, ID (United States)

1994-10-01T23:59:59.000Z

114

Dynamic Systems Analysis Report for Nuclear Fuel Recycle  

SciTech Connect

This report examines the time-dependent dynamics of transitioning from the current United States (U.S.) nuclear fuel cycle where used nuclear fuel is disposed in a repository to a closed fuel cycle where the used fuel is recycled and only fission products and waste are disposed. The report is intended to help inform policy developers, decision makers, and program managers of system-level options and constraints as they guide the formulation and implementation of advanced fuel cycle development and demonstration efforts and move toward deployment of nuclear fuel recycling infrastructure.

Brent Dixon; Sonny Kim; David Shropshire; Steven Piet; Gretchen Matthern; Bill Halsey

2008-12-01T23:59:59.000Z

115

Assessment of National Nuclear Fuel Cycle for Transmutations of High Level Nuclear Waste  

Science Journals Connector (OSTI)

The advanced fuel cycle initiative (AFCI) has been investigated for the safe processing of the spent nuclear fuels (SNFs), which has focused mainly ... of the SNFs considering the characteristics of the nuclear m...

Taeho Woo

2012-01-01T23:59:59.000Z

116

Proceedings of GLOBAL 2013: International Nuclear Fuel Cycle Conference - Nuclear Energy at a Crossroads  

SciTech Connect

The Global conference is a forum for the discussion of the scientific, technical, social and regulatory aspects of the nuclear fuel cycle. Relevant topics include global utilization of nuclear energy, current fuel cycle technologies, advanced reactors, advanced fuel cycles, nuclear nonproliferation and public acceptance.

NONE

2013-07-01T23:59:59.000Z

117

Pilot Application to Nuclear Fuel Cycle Options | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Pilot Application to Nuclear Fuel Cycle Options Pilot Application to Nuclear Fuel Cycle Options Pilot Application to Nuclear Fuel Cycle Options A Screening Method for Guiding R&D Decisions: Pilot Application to Screen Nuclear Fuel Cycle Options The Department of Energy's Office of Nuclear Energy (DOE-NE) invests in research and development (R&D) to ensure that the United States will maintain its domestic nuclear energy capability and scientific and technical leadership in the international community of nuclear power nations in the years ahead. The 2010 Nuclear Energy Research and Development Roadmap presents a high-level vision and framework for R&D activities that are needed to keep the nuclear energy option viable in the near term and to expand its use in the decades ahead. The roadmap identifies the development

118

EA-1977: Acceptance and Disposition of Used Nuclear Fuel Containing...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Fuel Containing U.S.-Origin Highly Enriched Uranium from the Federal Republic of Germany EA-1977: Acceptance and Disposition of Used Nuclear Fuel Containing U.S.-Origin...

119

RADIATION DOSE ASPECTS IN THE HANDLING OF EMERGING NUCLEAR FUELS  

Science Journals Connector (OSTI)

......Prot. (2008) 28:161. 15 NUREG. Standard review plan for the review of an application for a Mixed Oxide (MOX) fuel...fabrication facility. (2000) NUREG-1718, US Nuclear Regulatory Commission. 16 IAEA. Safety of uranium fuel fabrication......

G. Nicolaou

2014-02-01T23:59:59.000Z

120

Fuel assembly transfer basket for pool type nuclear reactor vessels  

DOE Patents (OSTI)

A fuel assembly transfer basket for a pool type, liquid metal cooled nuclear reactor having a side access loading and unloading port for receiving and relinquishing fuel assemblies during transfer.

Fanning, Alan W. (San Jose, CA); Ramsour, Nicholas L. (San Jose, CA)

1991-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Microsoft Word - spent nuclear fuel report.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Management of Spent Nuclear Fuel Management of Spent Nuclear Fuel at the Savannah River Site DOE/IG-0727 May 2006 REPORT ON MANAGEMENT OF SPENT NUCLEAR FUEL AT THE SAVANNAH RIVER SITE TABLE OF CONTENTS Spent Nuclear Fuel Management Details of Finding 1 Recommendations 2 Comments 3 Appendices 1. Objective, Scope, and Methodology 4 2. Prior Audit Reports 5 3. Management Comments 6 SPENT NUCLEAR FUEL MANGEMENT Page 1 Details of Finding H-Canyon The Department of Energy's (Department) spent nuclear fuel Operations program at the Savannah River Site (Site) will likely require Extended H-Canyon to be maintained at least two years beyond defined operational needs. The Department committed to maintain H-Canyon operational readiness to provide a disposal path for

122

EIS-0279: Spent Nuclear Fuel Management, Aiken, South Carolina | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

79: Spent Nuclear Fuel Management, Aiken, South Carolina 79: Spent Nuclear Fuel Management, Aiken, South Carolina EIS-0279: Spent Nuclear Fuel Management, Aiken, South Carolina SUMMARY The proposed DOE action considered in this environmental impact statement (EIS) is to implement appropriate processes for the safe and efficient management of spent nuclear fuel and targets at the Savannah River Site (SRS) in Aiken County, South Carolina, including placing these materials in forms suitable for ultimate disposition. PUBLIC COMMENT OPPORTUNITIES None available at this time. DOCUMENTS AVAILABLE FOR DOWNLOAD April 5, 2013 EIS-0279: Amended Record of Decision Spent Nuclear Fuel Management at the Savannah River Site April 1, 2013 EIS-0279-SA-01: Supplement Analysis Savannah River Site Spent Nuclear Fuel Management (DOE/EIS-0279-SA-01 and

123

Nuclear reactor fuel rod attachment system  

DOE Patents (OSTI)

A reusable system for removably attaching a nuclear reactor fuel rod (12) to a support member (14). A locking cap (22) is secured to the fuel rod (12) and a locking strip (24) is fastened to the support member (14). The locking cap (22) has two opposing fingers (24a and 24b) shaped to form a socket having a body portion (26). The locking strip has an extension (36) shaped to rigidly attach to the socket's body portion (26). The locking cap's fingers are resiliently deflectable. For attachment, the locking cap (22) is longitudinally pushed onto the locking strip (24) causing the extension (36) to temporarily deflect open the fingers (24a and 24b) to engage the socket's body portion (26). For removal, the process is reversed.

Christiansen, David W. (Kennewick, WA)

1982-01-01T23:59:59.000Z

124

Energy Department Announces New Investment in Nuclear Fuel Storage Research  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Investment in Nuclear Fuel Storage Investment in Nuclear Fuel Storage Research Energy Department Announces New Investment in Nuclear Fuel Storage Research April 16, 2013 - 12:19pm Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON - As part of its commitment to developing an effective strategy for the safe and secure storage and management of used nuclear fuel, the Energy Department today announced a new dry storage research and development project led by the Electric Power Research Institute (EPRI). The project will design and demonstrate dry storage cask technology for high burn-up spent nuclear fuels that have been removed from commercial nuclear power plants. "The Energy Department is committed to advancing clean, reliable and safe nuclear power - which provides the largest source of low-carbon

125

Energy Department Announces New Investment in Nuclear Fuel Storage Research  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Announces New Investment in Nuclear Fuel Storage Announces New Investment in Nuclear Fuel Storage Research Energy Department Announces New Investment in Nuclear Fuel Storage Research April 16, 2013 - 12:19pm Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON - As part of its commitment to developing an effective strategy for the safe and secure storage and management of used nuclear fuel, the Energy Department today announced a new dry storage research and development project led by the Electric Power Research Institute (EPRI). The project will design and demonstrate dry storage cask technology for high burn-up spent nuclear fuels that have been removed from commercial nuclear power plants. "The Energy Department is committed to advancing clean, reliable and safe nuclear power - which provides the largest source of low-carbon

126

DOE SPENT NUCLEAR FUEL DISPOSAL CONTAINER  

SciTech Connect

The DOE Spent Nuclear Fuel Disposal Container (SNF DC) supports the confinement and isolation of waste within the Engineered Barrier System of the Mined Geologic Disposal System (MGDS). Disposal containers are loaded and sealed in the surface waste handling facilities, transferred to the underground through the access mains, and emplaced in emplacement drifts. The DOE Spent Nuclear Fuel Disposal Container provides long term confinement of DOE SNF waste, and withstands the loading, transfer, emplacement, and retrieval loads and environments. The DOE SNF Disposal Containers provide containment of waste for a designated period of time, and limit radionuclide release thereafter. The disposal containers maintain the waste in a designated configuration, withstand maximum handling and rockfall loads, limit the individual waste canister temperatures after emplacement. The disposal containers also limit the introduction of moderator into the disposal container during the criticality control period, resist corrosion in the expected repository environment, and provide complete or limited containment of waste in the event of an accident. Multiple disposal container designs may be needed to accommodate the expected range of DOE Spent Nuclear Fuel. The disposal container will include outer and inner barrier walls and outer and inner barrier lids. Exterior labels will identify the disposal container and contents. Differing metal barriers will support the design philosophy of defense in depth. The use of materials with different failure mechanisms prevents a single mode failure from breaching the waste package. The corrosion-resistant inner barrier and inner barrier lid will be constructed of a high-nickel alloy and the corrosion-allowance outer barrier and outer barrier lid will be made of carbon steel. The DOE Spent Nuclear Fuel Disposal Containers interface with the emplacement drift environment by transferring heat from the waste to the external environment and by protecting the DOE waste canisters and their contents from damage/degradation by the external environment. The disposal containers also interface with the SNF by limiting access of moderator and oxidizing agents to the waste. The disposal containers interface with the Ex-Container System's emplacement drift disposal container supports. The disposal containers interface with the Canister Transfer System, Waste Emplacement System, Disposal Container Handling System, and Waste Package Remediation System during loading, handling, transfer, emplacement and remediation of the disposal container.

F. Habashi

1998-06-26T23:59:59.000Z

127

Used Nuclear Fuel Loading and Structural Performance Under Normal...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

deterministic evaluations of moderate-to-high burnup used nuclear fuel (UNF) mechanical performance under normal conditions of storage (NCS) and normal conditions of...

128

Spent nuclear fuel project - criteria document spent nuclear fuel final safety analysis report  

SciTech Connect

The criteria document provides the criteria and planning guidance for developing the Spent Nuclear Fuel (SNF) Final Safety Analysis Report (FSAR). This FSAR will support the US Department of Energy, Richland Operations Office decision to authorize the procurement, installation, installation acceptance testing, startup, and operation of the SNF Project facilities (K Basins, Cold Vacuum Drying Facility, and Canister Storage Building).

MORGAN, R.G.

1999-02-23T23:59:59.000Z

129

Risk and Responsibility Sharing in Nuclear Spent Fuel Management  

E-Print Network (OSTI)

With the Nuclear Waste Policy Act of 1982, the responsibility of American utilities in the long-term management of spent nuclear fuel was limited to the payment of a fee. This narrow involvement did not result in faster ...

De Roo, Guillaume

130

Review of Used Nuclear Fuel Storage and Transportation Technical Gap  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Analyses Analyses Review of Used Nuclear Fuel Storage and Transportation Technical Gap Analyses The U.S. Department of Energy Office of Nuclear Energy (DOE-NE), Office of Fuel Cycle Technology, has established the Used Fuel Disposition Campaign (UFDC) to conduct the research and development activities related to storage, transportation, and disposal of used nuclear fuel and high-level radioactive waste. The mission of the UFDC is to identify alternatives and conduct scientific research and technology development to enable storage, transportation, and disposal of used nuclear fuel (UNF) and wastes generated by existing and future nuclear fuel cycles. The Storage and Transportation activities within the UFDC are being developed to address issues regarding the extended storage of UNF and its subsequent

131

Study of feasible and sustainable multilateral approach on nuclear fuel cycle  

SciTech Connect

Despite the Fukushima accident it is undeniable that nuclear power remains one of the most important methods to handle global growth of economic/energy consumption and issues with greenhouse gases. If the demand for nuclear power increases, the demand for not only the generation of power but also for refining uranium (U), conversion, enrichment, re-conversion, and fuel manufacturing should increase. In addition, concerns for the proliferation of 'Sensitive Nuclear Technologies' (SNT) should also increase. We propose a demand-side approach, where nuclear fuel cycle (NFC) activities would be implemented among multiple states. With this approach, NFC services, in particular those using SNTs, are multilaterally executed and controlled, thereby preventing unnecessary proliferation of SNTs, and enabling safe and appropriate control of nuclear technologies and nuclear materials. This proposal would implement nuclear safety and security at an international level and solve transport issues for nuclear fuels. This proposal is based on 3 types of cooperation for each element of NFC: type A: cooperation for 3S only, services received; Type B: cooperation for 3S, MNA (Multilateral Nuclear Activities) without transfer of ownership to MNA; and Type C cooperation for 3S, MNA holding ownership rights. States involved in the 3 types of activity should be referred to as partner states, host states, and site states respectively. The feasibility of the proposal is discussed for the Asian region.

Kuno, Y.; Tazaki, M. [University of Tokyo, Tokyo (Japan); Japan Atomic Energy Agency - JAEA, 4-49 Muramatsu, Tokai-mura, Naka-gun, Ibaraki 319-1184 (Japan); Akiba, M.; Takashima, R.; Izumi, Y.; Tanaka, S. [University of Tokyo, Tokyo (Japan)

2013-07-01T23:59:59.000Z

132

National Nuclear Security Administration Service Center  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Service Center Service Center P. 0. Box 5400 ~ ~ ~ A d M m t b n Albuquerque, NM 87185 MEMORANDUM FOR: Scott Blake Harris, General Counsel, GC- 1, HQ FROM: Karen L. Boardman, Director * * SUBJECT: Annual National Environmental Policy Act Planning Summary for FY 201 1 In response to your memorandum of December 8,201 0, attached is the 20 1 1 Annual National Environmental Policy Act (NEPA) Planning Summary. The information is provided for the National Nuclear Security Administration, Service Center (NNSAISC) in Albuquerque, NM. Furthermore, in reply to the question, "Would a site-wide environmental impact statement facilitate future NEPA compliance efforts?" The general operations of this site can be described as administrative similar to those operations within the Forrestal building in D.C. Therefore, a

133

Used Nuclear Fuel Loading and Structural Performance Under Normal  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Nuclear Fuel Loading and Structural Performance Under Normal Nuclear Fuel Loading and Structural Performance Under Normal Conditions of Transport - Demonstration of Approach and Results of Used Fuel Performance Characterization Used Nuclear Fuel Loading and Structural Performance Under Normal Conditions of Transport - Demonstration of Approach and Results of Used Fuel Performance Characterization This report provides results of the initial demonstration of the modeling capability developed to perform preliminary deterministic evaluations of moderate-to-high burnup used nuclear fuel (UNF) mechanical performance under normal conditions of storage (NCS) and normal conditions of transport (NCT) conditions. This report also provides results from the sensitivity studies, and discussion on the long-term goals and objectives of this

134

Technology Readiness Levels for Advanced Nuclear Fuels and Materials Development  

SciTech Connect

The Technology Readiness Level (TRL) process is used to quantitatively assess the maturity of a given technology. The TRL process has been developed and successfully used by the Department of Defense (DOD) for development and deployment of new technology and systems for defense applications. In addition, NASA has also successfully used the TRL process to develop and deploy new systems for space applications. Advanced nuclear fuels and materials development is a critical technology needed for closing the nuclear fuel cycle. Because the deployment of a new nuclear fuel forms requires a lengthy and expensive research, development, and demonstration program, applying the TRL concept to the advanced fuel development program is very useful as a management and tracking tool. This report provides definition of the technology readiness level assessment process as defined for use in assessing nuclear fuel technology development for the Advanced Fuel Campaign (AFC).

Jon Carmack

2014-01-01T23:59:59.000Z

135

Coupon Surveillance For Corrosion Monitoring In Nuclear Fuel Basin  

SciTech Connect

Aluminum and stainless steel coupons were put into a nuclear fuel basin to monitor the effect of water chemistry on the corrosion of fuel cladding. These coupons have been monitored for over ten years. The corrosion and pitting data is being used to model the kinetics and estimate the damage that is occurring to the fuel cladding.

Mickalonis, J. I.; Murphy, T. R.; Deible, R.

2012-10-01T23:59:59.000Z

136

World nuclear capacity and fuel cycle requirements, November 1993  

SciTech Connect

This analysis report presents the current status and projections of nuclear capacity, generation, and fuel cycle requirements for all countries in the world using nuclear power to generate electricity for commercial use. Long-term projections of US nuclear capacity, generation, fuel cycle requirements, and spent fuel discharges for three different scenarios through 2030 are provided in support of the Department of Energy`s activities pertaining to the Nuclear Waste Policy Act of 1982 (as amended in 1987). The projections of uranium requirements also support the Energy Information Administration`s annual report, Domestic Uranium Mining and Milling Industry: Viability Assessment.

Not Available

1993-11-30T23:59:59.000Z

137

New Hampshire Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","1,247",29.8,"10,910",49.2 "Coal",546,13.1,"3,083",13.9 "Hydro and Pumped Storage",489,11.7,"1,478",6.7 "Natural Gas","1,215",29.1,"5,365",24.2 "Other1","-","-",57,0.3 "Other Renewable1",182,4.4,"1,232",5.6 "Petroleum",501,12.0,72,0.3 "Total","4,180",100.0,"22,196",100.0 "1Municipal Solid Waste net generation is allocated according to the biogenic and non-biogenic components of the fuel; however, all Municipal Solid Waste summer capacity is classified as Renewable."

138

New Jersey Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","4,108",22.3,"32,771",49.9 "Coal","2,036",11.1,"6,418",9.8 "Hydro and Pumped Storage",404,2.2,-176,-0.3 "Natural Gas","10,244",55.6,"24,902",37.9 "Other1",56,0.3,682,1.0 "Other Renewable1",226,1.2,850,1.3 "Petroleum","1,351",7.3,235,0.4 "Total","18,424",100.0,"65,682",100.0 "1Municipal Solid Waste net generation is allocated according to the biogenic and non-biogenic components of the fuel; however, all Municipal Solid Waste summer capacity is classified as Renewable."

139

Characterization plan for Hanford spent nuclear fuel  

SciTech Connect

Reprocessing of spent nuclear fuel (SNF) at the Hanford Site Plutonium-Uranium Extraction Plant (PUREX) was terminated in 1972. Since that time a significant quantity of N Reactor and Single-Pass Reactor SNF has been stored in the 100 Area K-East (KE) and K-West (KW) reactor basins. Approximately 80% of all US Department of Energy (DOE)-owned SNF resides at Hanford, the largest portion of which is in the water-filled KE and KW reactor basins. The basins were not designed for long-term storage of the SNF and it has become a priority to move the SNF to a more suitable location. As part of the project plan, SNF inventories will be chemically and physically characterized to provide information that will be used to resolve safety and technical issues for development of an environmentally benign and efficient extended interim storage and final disposition strategy for this defense production-reactor SNF.

Abrefah, J.; Thornton, T.A.; Thomas, L.E.; Berting, F.M.; Marschman, S.C.

1994-12-01T23:59:59.000Z

140

Benefits and concerns of a closed nuclear fuel cycle  

SciTech Connect

Nuclear power can play an important role in our energy future, contributing to increasing electricity demand while at the same time decreasing carbon dioxide emissions. However, the nuclear fuel cycle in the United States today is unsustainable. As stated in the 1982 Nuclear Waste Policy Act, the U.S. Department of Energy is responsible for disposing of spent nuclear fuel generated by commercial nuclear power plants operating in a “once-through” fuel cycle in the deep geologic repository located at Yucca Mountain. However, unyielding political opposition to the site has hindered the commissioning process to the extant that the current administration has recently declared the unsuitability of the Yucca Mountain site. In light of this the DOE is exploring other options, including closing the fuel cycle through recycling and reprocessing of spent nuclear fuel. The possibility of closing the fuel cycle is receiving special attention because of its ability to minimize the final high level waste (HLW) package as well as recover additional energy value from the original fuel. The technology is, however, still very controversial because of the increased cost and proliferation risk it can present. To lend perspective on the closed fuel cycle alternative, this presents the arguments for and against closing the fuel cycle with respect to sustainability, proliferation risk, commercial viability, waste management, and energy security.

Widder, Sarah H.

2010-11-17T23:59:59.000Z

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Pantex recognized for outstanding community service | National Nuclear  

National Nuclear Security Administration (NNSA)

recognized for outstanding community service | National Nuclear recognized for outstanding community service | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > NNSA Blog > Pantex recognized for outstanding community service Pantex recognized for outstanding community service Posted By Office of Public Affairs Pantex recognized for outstanding community service

142

Pantex recognized for outstanding community service | National Nuclear  

NLE Websites -- All DOE Office Websites (Extended Search)

recognized for outstanding community service | National Nuclear recognized for outstanding community service | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > NNSA Blog > Pantex recognized for outstanding community service Pantex recognized for outstanding community service Posted By Office of Public Affairs Pantex recognized for outstanding community service

143

Assessment of Nuclear Resonance Fluorescence for Spent Nuclear Fuel Assay  

E-Print Network (OSTI)

Security of the National Nuclear Security Administration, USof Energys National Nuclear Security Administration (NNSA)

Quiter, Brian

2012-01-01T23:59:59.000Z

144

Nuclear fuel cycle facility accident analysis handbook  

SciTech Connect

The purpose of this Handbook is to provide guidance on how to calculate the characteristics of releases of radioactive materials and/or hazardous chemicals from nonreactor nuclear facilities. In addition, the Handbook provides guidance on how to calculate the consequences of those releases. There are four major chapters: Hazard Evaluation and Scenario Development; Source Term Determination; Transport Within Containment/Confinement; and Atmospheric Dispersion and Consequences Modeling. These chapters are supported by Appendices, including: a summary of chemical and nuclear information that contains descriptions of various fuel cycle facilities; details on how to calculate the characteristics of source terms for releases of hazardous chemicals; a comparison of NRC, EPA, and OSHA programs that address chemical safety; a summary of the performance of HEPA and other filters; and a discussion of uncertainties. Several sample problems are presented: a free-fall spill of powder, an explosion with radioactive release; a fire with radioactive release; filter failure; hydrogen fluoride release from a tankcar; a uranium hexafluoride cylinder rupture; a liquid spill in a vitrification plant; and a criticality incident. Finally, this Handbook includes a computer model, LPF No.1B, that is intended for use in calculating Leak Path Factors. A list of contributors to the Handbook is presented in Chapter 6. 39 figs., 35 tabs.

NONE

1998-03-01T23:59:59.000Z

145

The Use of Staff Augmentation Subcontracts at the National Nuclear Security Administration's Mixed Oxide Fuel Fabrication Facility, IG-0887  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The Use of Staff Augmentation The Use of Staff Augmentation Subcontracts at National Nuclear Security Administration's Mixed Oxide Fuel Fabrication Facility DOE/IG-0887 May 2013 U.S. Department of Energy Office of Inspector General Office of Audits and Inspections Department of Energy Washington, DC 20585 May 15, 2013 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman Inspector General SUBJECT: INFORMATION: Audit Report on "The Use of Staff Augmentation Subcontracts at the National Nuclear Security Administration's Mixed Oxide Fuel Fabrication Facility" BACKGROUND Shaw AREVA MOX Services, LLC (MOX Services) is responsible for the design and construction of the National Nuclear Security Administration's (NNSA) nearly $5 billion Mixed

146

Assessment of Nuclear Resonance Fluorescence for Spent Nuclear Fuel Assay  

SciTech Connect

In nuclear resonance fluorescence (NRF) measurements, resonances are excited by an external photon beam leading to the emission of gamma rays with specific energies that are characteristic of the emitting isotope. NRF promises the unique capability of directly quantifying a specific isotope without the need for unfolding the combined responses of several fissile isotopes as is required in other measurement techniques. We have analyzed the potential of NRF as a non-destructive analysis technique for quantitative measurements of Pu isotopes in spent nuclear fuel (SNF). Given the low concentrations of 239Pu in SNF and its small integrated NRF cross sections, the main challenge in achieving precise and accurate measurements lies in accruing sufficient counting statistics in a reasonable measurement time. Using analytical modeling, and simulations with the radiation transport code MCNPX that has been experimentally tested recently, the backscatter and transmission methods were quantitatively studied for differing photon sources and radiation detector types. Resonant photon count rates and measurement times were estimated for a range of photon source and detection parameters, which were used to determine photon source and gamma-ray detector requirements. The results indicate that systems based on a bremsstrahlung source and present detector technology are not practical for high-precision measurements of 239Pu in SNF. Measurements that achieve the desired uncertainties within hour-long measurements will either require stronger resonances, which may be expressed by other Pu isotopes, or require quasi-monoenergetic photon sources with intensities that are approximately two orders of magnitude higher than those currently being designed or proposed.This work is part of a larger effort sponsored by the Next Generation Safeguards Initiative to develop an integrated instrument, comprised of individual NDA techniques with complementary features, that is fully capable of determining Pu mass in spent fuel assemblies.

Quiter, Brian; Ludewigt, Bernhard; Ambers, Scott

2011-06-30T23:59:59.000Z

147

What to Expect When Readying to Move Spent Nuclear Fuel from...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

What to Expect When Readying to Move Spent Nuclear Fuel from Commercial Nuclear Power Plants What to Expect When Readying to Move Spent Nuclear Fuel from Commercial Nuclear Power...

148

Materials Modeling and Simulation for Nuclear Fuels (MMSNF) Workshops  

NLE Websites -- All DOE Office Websites (Extended Search)

Aerial photo of Argonne National Laboratory Argonne National Laboratory University of Chicago Chicago Photography courtesy Thomas F Ewing Privacy and Security Notice The MMSNF Workshops The goal of the Materials Modeling and Simulation for Nuclear Fuels (MMSNF) workshops is to stimulate research and discussions on modeling and simulations of nuclear fuels, to assist the design of improved fuels and the evaluation of fuel performance. In addition to research focused on existing or improved types of LWR reactors, recent modeling programs, networks, and links have been created to develop innovative nuclear fuels and materials for future generations of nuclear reactors. Examples can be found in Europe (e.g. F-BRIDGE project and ACTINET network and SAMANTHA cooperative network), in the USA (e.g. CASL, NEAMS, CESAR and CMSN network

149

Used Nuclear Fuel Loading and Structural Performance Under Normal  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Nuclear Fuel Loading and Structural Performance Under Normal Nuclear Fuel Loading and Structural Performance Under Normal Conditions of Transport - Modeling, Simulation and Experimental Integration RD&D Plan Used Nuclear Fuel Loading and Structural Performance Under Normal Conditions of Transport - Modeling, Simulation and Experimental Integration RD&D Plan Used nuclear fuel (UNF) must maintain its integrity during the storage period in such a way that it can withstand the physical forces of handling and transportation associated with restaging the fuel and transporting it to treatment or recycling facilities, or to a geologic repository. This RD&D plan describes a methodology, including development and use of analytical models, to evaluate loading and associated mechanical responses of UNF rods and key structural components. The plan objective is to

150

Used Nuclear Fuel Loading and Structural Performance Under Normal  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Used Nuclear Fuel Loading and Structural Performance Under Normal Used Nuclear Fuel Loading and Structural Performance Under Normal Conditions of Transport - Modeling, Simulation and Experimental Integration RD&D Plan Used Nuclear Fuel Loading and Structural Performance Under Normal Conditions of Transport - Modeling, Simulation and Experimental Integration RD&D Plan Used nuclear fuel (UNF) must maintain its integrity during the storage period in such a way that it can withstand the physical forces of handling and transportation associated with restaging the fuel and transporting it to treatment or recycling facilities, or to a geologic repository. This RD&D plan describes a methodology, including development and use of analytical models, to evaluate loading and associated mechanical responses of UNF rods and key structural components. The plan objective is to

151

Methods for making a porous nuclear fuel element  

SciTech Connect

Porous nuclear fuel elements for use in advanced high temperature gas-cooled nuclear reactors (HTGR's), and to processes for fabricating them. Advanced uranium bi-carbide, uranium tri-carbide and uranium carbonitride nuclear fuels can be used. These fuels have high melting temperatures, high thermal conductivity, and high resistance to erosion by hot hydrogen gas. Tri-carbide fuels, such as (U,Zr,Nb)C, can be fabricated using chemical vapor infiltration (CVI) to simultaneously deposit each of the three separate carbides, e.g., UC, ZrC, and NbC in a single CVI step. By using CVI, the nuclear fuel may be deposited inside of a highly porous skeletal structure made of, for example, reticulated vitreous carbon foam.

Youchison, Dennis L; Williams, Brian E; Benander, Robert E

2014-12-30T23:59:59.000Z

152

Nuclear fuel corrosion over millennia interpreted using geologic data  

SciTech Connect

Corrosion of nuclear fuel over the 10,000 year regulatory period in a geologic repository will be a function of physical characteristics (e.g., crystallinity, crystal sizes, crystal forms) and chemical characteristics (e.g., crystal composition, compositional variability, accessory phases). Natural uraninite (nominally UO{sub 2+x}) which has undergone long-term corrosion can be studied to infer the long-term behavior of nuclear fuel. Previously, uraninite from the Nopal I deposit, Pena Blanca district, Chihuahua, Mexico, has been shown to constitute an outstanding analog material for comparison with nuclear fuel. Similarities between Nopal I uraninite and nuclear fuel have been shown to include bulk composition, general crystal structure, and total trace element content. Data presented here suggest that, as a bulk material, Nopal I uraninite compares favorably with irradiated nuclear fuel. Nevertheless, some fine-scale differences are noted between Nopal I uraninite and irradiated nuclear fuel with respect to both internal structures and compositions. These observations suggest that whereas the long-term responses of the two materials to oxidative alteration in a geologic repository may be similar, the detailed mechanisms of initial oxidant penetration and the short-term oxidative alternation of Nopal I uraninite and irradiated nuclear fuel are likely to be different.

Pearcy, E.C.; Manaktala, H.K. [Southwest Research Inst., San Antonio, TX (United States). Center for Nuclear Waste Regulatory Analyses

1994-12-31T23:59:59.000Z

153

NYPA, Entergy begin nuclear management services plan  

SciTech Connect

The New York Power Authority (NYPA) and Entergy Corp. of New Orleans, La., announced recently the signing of a memorandum of understanding as a step toward a contract for Entergy to provide management services to NYPA`s two nuclear power plants. The agreement is the first of its kind. NYPA is the nation`s largest state-owned electric utility and supplier of one-quarter of New York`s electricity. Its nuclear plants are Indian Point 3 (IP3) in Buchanan, Westchester County, and James A. FitzPatrick in Scriba, Oswego County. Entergy is a utility holding company and its subsidiary, Entergy Operations Inc., is widely recognized as one of the leading nuclear operators in the United States. {open_quotes}NYPA`s nuclear plants are assets that belong to the people of New York,{close_quotes} said C.D. {open_quotes}Rapp{close_quotes} Rappleyea, NYPA`s chairman and CEO. {open_quotes}Our alliance with Entergy can provide the people of this state with added assurance that these plants will operate with the highest level of safety and efficiency.{close_quotes} FitzPatrick, an 800 MW boiling water reactor, has operated since 1975 and IP3, a 980 MW pressurized water reactor, since 1976. Although both are currently running well, they have had problems in recent years, and IP3 is on the US Nuclear Regulatory Commission`s (NRC) list of plants requiring increased regulatory attention. Entergy operated both types of reactors, has three single-unit sites like NYPA`s and is experienced in operating plants for different utility owners.

NONE

1996-10-01T23:59:59.000Z

154

Laser-based characterization of nuclear fuel plates  

SciTech Connect

Ensuring the integrity of fuel-clad and clad-clad bonding in nuclear fuels is important for safe reactor operation and assessment of fuel performance, yet the measurement of bond strengths in actual fuels has proved challenging. The laser shockwave technique (LST) originally developed to characterize structural adhesion in composites is being employed to characterize interface strength in a new type of plate fuel being developed at Idaho National Laboratory (INL). LST is a non-contact method that uses lasers for the generation and detection of large-amplitude acoustic waves and is well suited for application to both fresh and irradiated nuclear-fuel plates. This paper will report on initial characterization results obtained from fresh fuel plates manufactured by different processes, including hot isostatic pressing, friction stir welding, and hot rolling.

Smith, James A.; Cottle, Dave L.; Rabin, Barry H. [Idaho National Laboratory, Fuel Performance and Design, P.O. Box 1625, Idaho Falls, Idaho, 83415-6188 (United States)

2014-02-18T23:59:59.000Z

155

Pyroprocessing of fast flux test facility nuclear fuel  

SciTech Connect

Used nuclear fuel from the Fast Flux Test Facility (FFTF) was recently transferred to the Idaho National Laboratory and processed by pyroprocessing in the Fuel Conditioning Facility. Approximately 213 kg of uranium from sodium-bonded metallic FFTF fuel was processed over a one year period with the equipment previously used for the processing of EBR-II used fuel. The peak burnup of the FFTF fuel ranged from 10 to 15 atom% for the 900+ chopped elements processed. Fifteen low-enriched uranium ingots were cast following the electrorefining and distillation operations to recover approximately 192 kg of uranium. A material balance on the primary fuel constituents, uranium and zirconium, during the FFTF campaign will be presented along with a brief description of operating parameters. Recoverable uranium during the pyroprocessing of FFTF nuclear fuel was greater than 95% while the purity of the final electro-refined uranium products exceeded 99%. (authors)

Westphal, B.R.; Wurth, L.A.; Fredrickson, G.L.; Galbreth, G.G.; Vaden, D.; Elliott, M.D.; Price, J.C.; Honeyfield, E.M.; Patterson, M.N. [Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID, 83415 (United States)

2013-07-01T23:59:59.000Z

156

Ukraine Loads U.S. Nuclear Fuel into Power Plant as Part of DOE-Ukraine Nuclear Fuel Qualification Program  

Energy.gov (U.S. Department of Energy (DOE))

fficials from the U.S. Department of Energy’s (DOE) Office of Nuclear Energy today (April 8, 2010) participated in a ceremony in Ukraine to mark the insertion of Westinghouse-produced nuclear fuel into a nuclear power plant in Ukraine.

157

Enforcement Letter, West Valley Nuclear Services- March 30, 1998  

Energy.gov (U.S. Department of Energy (DOE))

Issued to West Valley Nuclear Services related to Hazard Analysis, Design Review, Work Control Implementation, and a Contamination Event at the West Valley Demonstration Project

158

MOX Services Unclassified Information System PIA, National Nuclear...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

System PIA, National Nuclear Services Administration More Documents & Publications TRAIN-PIA.pdf Occupational Medicine - Assistant PIA, Idaho National Laboratory Manchester...

159

Nuclear Safety Component and Services Procurement, June 29, 2011...  

Office of Environmental Management (EM)

Office of Enforcement and Oversight Criteria Review and Approach Document Subject: Nuclear Safety Component and Services Procurement Inspection Criteria, Inspection Activities, and...

160

Reactor Physics and Fuel Cycle Analysis - Nuclear Engineering Division  

NLE Websites -- All DOE Office Websites (Extended Search)

Analysis Analysis Capabilities Nuclear Systems Modeling and Design Analysis Reactor Physics and Fuel Cycle Analysis Overview Current Projects Software Nuclear Plant Dynamics and Safety Nuclear Data Program Advanced Reactor Development Nuclear Waste Form and Repository Performance Modeling Nuclear Energy Systems Design and Development Other Capabilities Work with Argonne Contact us For Employees Site Map Help Join us on Facebook Follow us on Twitter NE on Flickr Reactor Physics and Fuel Cycle Analysis Bookmark and Share Reactor physics and fuel cycle analysis is a core competency of the Nuclear Engineering (NE) Division. The Division has played a major role in the design and analysis of advanced reactors, particularly liquid-metal-cooled reactors. NE researchers have concentrated on developing computer codes for

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Thermoacoustic device for nuclear fuel monitoring and heat transfer enhancement  

Science Journals Connector (OSTI)

The Fukushima Dai’ichi nuclear disaster of 2011 exposed the need for self-powered sensors that could transmit the status of the fuel rods within the reactor and in spent fuel ponds that was not dependent upon availability of external electrical power for either sensing or telemetry. One possible solution is the use of a thermoacoustic standing wave engine incorporated within a fuel rod which is heated by the nuclear fuel. The engine’s resonance frequency is correlated to the fuel rod temperature and will be transmitted by sound radiation through the reactor's or storage pond’s surrounding water. In addition to acting as a passive temperature sensor the thermoacoustic device will serve to enhance heat transfer from the fuel to the surrounding heat transfer fluid. When activated the acoustically-driven streaming flow of the gas within the fuel rod will circulate gas away from the nuclear fuel and convectively enhance heat transfer to the surrounding coolant. We will present results for a thermoacousticresonator built into a Nitonic® 60 (stainless steel) fuel rod that can be substituted for conventional fuel rods in the Idaho National Laboratory’s Advanced Test Reactor. This laboratory version is heated electrically. [Work supported by the U.S. Department of Energy.

Randall A. Ali; Steven L. Garrett; James A. Smith; Dale K. Kotter

2012-01-01T23:59:59.000Z

162

Energy Return on Investment from Recycling Nuclear Fuel  

SciTech Connect

This report presents an evaluation of the Energy Return on Investment (EROI) from recycling an initial batch of 800 t/y of used nuclear fuel (UNF) through a Recycle Center under a number of different fuel cycle scenarios. The study assumed that apart from the original 800 t of UNF only depleted uranium was available as a feed. Therefore for each subsequent scenario only fuel that was derived from the previous fuel cycle scenario was considered. The scenarios represent a good cross section of the options available and the results contained in this paper and associated appendices will allow for other fuel cycle options to be considered.

None

2011-08-17T23:59:59.000Z

163

Ukraine Fuel Removal: Fact Sheet | National Nuclear Security Administration  

NLE Websites -- All DOE Office Websites (Extended Search)

Ukraine Fuel Removal: Fact Sheet | National Nuclear Security Administration Ukraine Fuel Removal: Fact Sheet | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > Media Room > Fact Sheets > Ukraine Fuel Removal: Fact Sheet Fact Sheet Ukraine Fuel Removal: Fact Sheet Mar 26, 2012 For nearly two decades, the United States and Ukraine have cooperated on a

164

Nuclear Power Generation and Fuel Cycle Report 1997  

Gasoline and Diesel Fuel Update (EIA)

7) 7) Distribution Category UC-950 Nuclear Power Generation and Fuel Cycle Report 1997 September 1997 Energy Information Administration Office of Coal, Nuclear, Electric and Alternate Fuels U.S. Department of Energy Washington, DC 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the Department of Energy. The information contained herein should not be construed as advocating or reflecting any policy position of the Department of Energy or of any other organization. Contacts Energy Information Administration/ Nuclear Power Generation and Fuel Cycle Report 1997 ii The Nuclear Power Generation and Fuel Cycle Report is prepared by the U.S. Department of Energy's Energy Information Administration. Questions and comments concerning the contents of the report may be directed to:

165

Public Acceptability of and Preferences for Used Nuclear Fuel...  

NLE Websites -- All DOE Office Websites (Extended Search)

Acceptance and Preferences for Used Nuclear Fuel Management in the U.S. Hank C. Jenkins-Smith Kuhika Gupta Center for Energy, Security & Society University of Oklahoma Energy...

166

Ukraine Fuel Removal: Fact Sheet | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Ukraine Fuel Removal: Fact Sheet | National Nuclear Security Administration Ukraine Fuel Removal: Fact Sheet | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > Media Room > Fact Sheets > Ukraine Fuel Removal: Fact Sheet Fact Sheet Ukraine Fuel Removal: Fact Sheet Mar 26, 2012 For nearly two decades, the United States and Ukraine have cooperated on a

167

Nuclear Power Generation and Fuel Cycle Report 1996  

Gasoline and Diesel Fuel Update (EIA)

6) 6) Distribution Category UC-950 Nuclear Power Generation and Fuel Cycle Report 1996 October 1996 Energy Information Administration Office of Coal, Nuclear, Electric and Alternate Fuels U.S. Department of Energy Washington, DC 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the Department of Energy. The information contained herein should not be construed as advocating or reflecting any policy position of the Department of Energy or of any other organization. Energy Information Administration/ Nuclear Power Generation and Fuel Cycle Report 1996 ii Contacts This report was prepared in the Office of Coal, Nuclear, report should be addressed to the following staff Electric and Alternate Fuels by the Analysis and Systems

168

Next-generation nuclear fuel withstands high-temperature accident...  

NLE Websites -- All DOE Office Websites (Extended Search)

teri.ehresman@inl.gov Bill Cabage (ORNL), 865-574-4399, cabagewh@ornl.gov Next-generation nuclear fuel withstands high-temperature accident conditions IDAHO FALLS - A safer...

169

Plutonium and Reprocessing of Spent Nuclear Fuel  

Science Journals Connector (OSTI)

...might spawn nuclear terrorism. Less than...reprocessing plant. The U.S. nuclear-energy...current fleet of power reactors (15...operational risk of transmutation...future of nuclear power is clarified...constructed plant increased...

Frank N. von Hippel

2001-09-28T23:59:59.000Z

170

Long-term management of high-level radioactive waste (HLW) and spent nuclear fuel (SNF)  

Energy.gov (U.S. Department of Energy (DOE))

GC-52 provides legal advice to DOE regarding the long-term management of high-level radioactive waste (HLW) and spent nuclear fuel (SNF). SNF is nuclear fuel that has been used as fuel in a reactor...

171

Enforcement Letter, West Valley Nuclear Services - March 30, 1998 |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

West Valley Nuclear Services - March 30, 1998 West Valley Nuclear Services - March 30, 1998 Enforcement Letter, West Valley Nuclear Services - March 30, 1998 March 30, 1998 Issued to West Valley Nuclear Services related to Hazard Analysis, Design Review, Work Control Implementation, and a Contamination Event at the West Valley Demonstration Project This letter refers to the Department of Energy's (DOE) evaluation of West Valley Nuclear Services Company's (WVNS) report of a potential noncompliance with the requirements of 10 CFR 830.120 (Quality Assurance) and 10 CFR 835 (Occupational Radiation Protection). This potential noncompliance, which involved inadequate hazards analysis, design review, and implementation of work controls during decontamination activities for a high-level waste tank mobilization pump, was identified by WVNS on

172

LMFBR operation in the nuclear cycle without fuel reprocessing  

SciTech Connect

Substantiation is given to expediency of investigation of nuclear power (NP) development with fast reactors cooled by lead-bismuth alloy operating during extended time in the open nuclear fuel cycle with slightly enriched or depleted uranium make-up. 9 refs., 1 fig., 6 tabs.

Toshinsky, S.I. [Institute of Physics and Power Engineering, Kaluga (Russian Federation)

1997-12-01T23:59:59.000Z

173

International Nuclear Fuel Cycle Fact Book. Revision 5  

SciTech Connect

This Fact Book has been compiled in an effort to provide: (1) an overview of worldwide nuclear power and fuel cycle programs; and (2) current data concerning fuel cycle and waste management facilities, R and D programs, and key personnel in countries other than the United States. Additional information on each country's program is available in the International Source Book: Nuclear Fuel Cycle Research and Development, PNL-2478, Rev. 2. The Fact Book is organized as follows: (1) Overview section - summary tables which indicate national involvement in nuclear reactor, fuel cycle, and waste management development activities; (2) national summaries - a section for each country which summarizes nuclear policy, describes organizational relationships and provides addresses, names of key personnel, and facilities information; (3) international agencies - a section for each of the international agencies which has significant fuel cycle involvement; (4) energy supply and demand - summary tables, including nuclear power projections; (5) fuel cycle - summary tables; and (6) travel aids international dialing instructions, international standard time chart, passport and visa requirements, and currency exchange rate.

Harmon, K.M.; Lakey, L.T.; Leigh, I.W.; Jeffs, A.G.

1985-01-01T23:59:59.000Z

174

International nuclear fuel cycle fact book. Revision 4  

SciTech Connect

This Fact Book has been compiled in an effort to provide (1) an overview of worldwide nuclear power and fuel cycle programs and (2) current data concerning fuel cycle and waste management facilities, R and D programs, and key personnel in countries other than the United States. Additional information on each country's program is available in the International Source Book: Nuclear Fuel Cycle Research and Development, PNL-2478, Rev. 2. The Fact Book is organized as follows: (1) Overview section - summary tables which indicate national involvement in nuclear reactor, fuel cycle, and waste management development activities; (2) national summaries - a section for each country which summarizes nuclear policy, describes organizational relationships and provides addresses, names of key personnel, and facilities information; (3) international agencies - a section for each of the international agencies which has significant fuel cycle involvement; (4) energy supply and demand - summary tables, including nuclear power projections; (5) fuel cycle - summary tables; and (6) travel aids - international dialing instructions, international standard time chart, passport and visa requirements, and currency exchange rate.

Harmon, K.M.; Lakey, L.T.; Leigh, I.W.

1984-03-01T23:59:59.000Z

175

MOX fuel arrangement for nuclear core  

DOE Patents (OSTI)

In order to use up a stockpile of weapons-grade plutonium, the plutonium is converted into a mixed oxide (MOX) fuel form wherein it can be disposed in a plurality of different fuel assembly types. Depending on the equilibrium cycle that is required, a predetermined number of one or more of the fuel assembly types are selected and arranged in the core of the reactor in accordance with a selected loading schedule. Each of the fuel assemblies is designed to produce different combustion characteristics whereby the appropriate selection and disposition in the core enables the resulting equilibrium cycle to closely resemble that which is produced using urania fuel. The arrangement of the MOX rods and burnable absorber rods within each of the fuel assemblies, in combination with a selective control of the amount of plutonium which is contained in each of the MOX rods, is used to tailor the combustion characteristics of the assembly.

Kantrowitz, Mark L. (Portland, CT); Rosenstein, Richard G. (Windsor, CT)

2001-07-17T23:59:59.000Z

176

Mox fuel arrangement for nuclear core  

DOE Patents (OSTI)

In order to use up a stockpile of weapons-grade plutonium, the plutonium is converted into a mixed oxide (MOX) fuel form wherein it can be disposed in a plurality of different fuel assembly types. Depending on the equilibrium cycle that is required, a predetermined number of one or more of the fuel assembly types are selected and arranged in the core of the reactor in accordance with a selected loading schedule. Each of the fuel assemblies is designed to produce different combustion characteristics whereby the appropriate selection and disposition in the core enables the resulting equilibrium cycle to closely resemble that which is produced using urania fuel. The arrangement of the MOX rods and burnable absorber rods within each of the fuel assemblies, in combination with a selective control of the amount of plutonium which is contained in each of the MOX rods, is used to tailor the combustion. characteristics of the assembly.

Kantrowitz, Mark L. (Portland, CT); Rosenstein, Richard G. (Windsor, CT)

2001-05-15T23:59:59.000Z

177

MOX fuel arrangement for nuclear core  

DOE Patents (OSTI)

In order to use up a stockpile of weapons-grade plutonium, the plutonium is converted into a mixed oxide (MOX) fuel form wherein it can be disposed in a plurality of different fuel assembly types. Depending on the equilibrium cycle that is required, a predetermined number of one or more of the fuel assembly types are selected and arranged in the core of the reactor in accordance with a selected loading schedule. Each of the fuel assemblies is designed to produce different combustion characteristics whereby the appropriate selection and disposition in the core enables the resulting equilibrium cycle to closely resemble that which is produced using urania fuel. The arrangement of the MOX rods and burnable absorber rods within each of the fuel assemblies, in combination with a selective control of the amount of plutonium which is contained in each of the MOX rods, is used to tailor the combustion characteristics of the assembly. 38 figs.

Kantrowitz, M.L.; Rosenstein, R.G.

1998-10-13T23:59:59.000Z

178

MOX fuel arrangement for nuclear core  

DOE Patents (OSTI)

In order to use up a stockpile of weapons-grade plutonium, the plutonium is converted into a mixed oxide (MOX) fuel form wherein it can be disposed in a plurality of different fuel assembly types. Depending on the equilibrium cycle that is required, a predetermined number of one or more of the fuel assembly types are selected and arranged in the core of the reactor in accordance with a selected loading schedule. Each of the fuel assemblies is designed to produce different combustion characteristics whereby the appropriate selection and disposition in the core enables the resulting equilibrium cycle to closely resemble that which is produced using urania fuel. The arrangement of the MOX rods and burnable absorber rods within each of the fuel assemblies, in combination with a selective control of the amount of plutonium which is contained in each of the MOX rods, is used to tailor the combustion characteristics of the assembly.

Kantrowitz, Mark L. (Portland, CT); Rosenstein, Richard G. (Windsor, CT)

1998-01-01T23:59:59.000Z

179

Nuclear Regulatory Commission's Integrated Strategy for Spent Fuel Management  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NRC's NRC's Integrated Strategy for NRC s Integrated Strategy for Spent Fuel Management Earl Easton 1 U.S. Nuclear Regulatory Commission May 25, 2010 Road to Yucca Mountain * 20+ years of preparation for the licensing i review * DOE application received in June 2008 and accepted for review in September 2008 * President Obama pursues alternatives to Yucca Mountain * DOE motion to withdraw in March 2010 2 * DOE motion to withdraw in March 2010 * Blue Ribbon Commission on America's Nuclear Future 2 Growing Spent Fuel Inventory Cumulative Used Nuclear Fuel Scenarios 50,000 100,000 150,000 200,000 250,000 Metric Tons 3 - 50,000 2010 2015 2020 2025 2030 2035 2040 2045 2050 Year Reference: Crozat, March 2010 Integrated Strategy * In response to the evolving national debate on spent fuel management strategy, NRC initiated a number of actions:

180

Review of Used Nuclear Fuel Storage and Transportation Technical Gap  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Analysis Analysis Review of Used Nuclear Fuel Storage and Transportation Technical Gap Analysis While both wet and dry storage have been shown to be safe options for storing used nuclear fuel (UNF), the focus of the program is on dry storage of commercial UNF at reactor or centralized locations. This report focuses on the knowledge gaps concerning extended storage identified in numerous domestic and international investigations and provides the Used Fuel Disposition Campaign"s (UFDC) gap description, any alternate gap descriptions, the rankings by the various organizations, evaluation of the priority assignment, and UFDC-recommended action based on the comparison. Review of Used Nuclear Fuel Storage and Transportation Technical Gap Analysis More Documents & Publications

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Spent nuclear fuel discharges from US reactors 1992  

SciTech Connect

This report provides current statistical data on every fuel assembly irradiated in commercial nuclear reactors operating in the United States. It also provides data on the current inventories and storage capacities of those reactors to a wide audience, including Congress, Federal and State agencies, the nuclear and electric industries and the general public. It uses data from the mandatory, ``Nuclear Fuel Data`` survey, Form RW-859 for 1992 and historical data collected by the Energy Information Administration (EIA) on previous Form RW-859 surveys. The report was prepared by the EIA under a Memorandum of Understanding with the Office of Civilian Radioactive Waste Management.

Not Available

1994-05-05T23:59:59.000Z

182

Plutonium and Reprocessing of Spent Nuclear Fuel  

Science Journals Connector (OSTI)

...Repository for the Disposal of Spent Nuclear...Radioactive Waste at Yucca Mountain (YMP-0106...not committed funding to build...Repository for the Disposal of Spent Nuclear...Radioactive Waste at Yucca Mountain (YMP-0106, Yucca Mountain Project, North...

Frank N. von Hippel

2001-09-28T23:59:59.000Z

183

Depleted uranium as a backfill for nuclear fuel waste package  

DOE Patents (OSTI)

A method for packaging spent nuclear fuel for long-term disposal in a geological repository. At least one spent nuclear fuel assembly is first placed in an unsealed waste package and a depleted uranium fill material is added to the waste package. The depleted uranium fill material comprises flowable particles having a size sufficient to substantially fill any voids in and around the assembly and contains isotopically-depleted uranium in the +4 valence state in an amount sufficient to inhibit dissolution of the spent nuclear fuel from the assembly into a surrounding medium and to lessen the potential for nuclear criticality inside the repository in the event of failure of the waste package. Last, the waste package is sealed, thereby substantially reducing the release of radionuclides into the surrounding medium, while simultaneously providing radiation shielding and increased structural integrity of the waste package.

Forsberg, Charles W. (Oak Ridge, TN)

1998-01-01T23:59:59.000Z

184

Depleted uranium as a backfill for nuclear fuel waste package  

DOE Patents (OSTI)

A method is described for packaging spent nuclear fuel for long-term disposal in a geological repository. At least one spent nuclear fuel assembly is first placed in an unsealed waste package and a depleted uranium fill material is added to the waste package. The depleted uranium fill material comprises flowable particles having a size sufficient to substantially fill any voids in and around the assembly and contains isotopically-depleted uranium in the +4 valence state in an amount sufficient to inhibit dissolution of the spent nuclear fuel from the assembly into a surrounding medium and to lessen the potential for nuclear criticality inside the repository in the event of failure of the waste package. Last, the waste package is sealed, thereby substantially reducing the release of radionuclides into the surrounding medium, while simultaneously providing radiation shielding and increased structural integrity of the waste package. 6 figs.

Forsberg, C.W.

1998-11-03T23:59:59.000Z

185

Nuclear energy: Thorium fuel has risks  

Science Journals Connector (OSTI)

... thorium's use in declared nuclear activities, and greater vigilance is needed to protect against surreptitious activities involving this element. ...

Stephen F. Ashley; Geoffrey T. Parks; William J. Nuttall; Colin Boxall; Robin W. Grimes

2012-12-05T23:59:59.000Z

186

Porous nuclear fuel element with internal skeleton for high-temperature gas-cooled nuclear reactors  

DOE Patents (OSTI)

Porous nuclear fuel elements for use in advanced high temperature gas-cooled nuclear reactors (HTGR's), and to processes for fabricating them. Advanced uranium bi-carbide, uranium tri-carbide and uranium carbonitride nuclear fuels can be used. These fuels have high melting temperatures, high thermal conductivity, and high resistance to erosion by hot hydrogen gas. Tri-carbide fuels, such as (U,Zr,Nb)C, can be fabricated using chemical vapor infiltration (CVI) to simultaneously deposit each of the three separate carbides, e.g., UC, ZrC, and NbC in a single CVI step. By using CVI, the nuclear fuel may be deposited inside of a highly porous skeletal structure made of, for example, reticulated vitreous carbon foam.

Youchison, Dennis L.; Williams, Brian E.; Benander, Robert E.

2013-09-03T23:59:59.000Z

187

Porous nuclear fuel element for high-temperature gas-cooled nuclear reactors  

DOE Patents (OSTI)

Porous nuclear fuel elements for use in advanced high temperature gas-cooled nuclear reactors (HTGR's), and to processes for fabricating them. Advanced uranium bi-carbide, uranium tri-carbide and uranium carbonitride nuclear fuels can be used. These fuels have high melting temperatures, high thermal conductivity, and high resistance to erosion by hot hydrogen gas. Tri-carbide fuels, such as (U,Zr,Nb)C, can be fabricated using chemical vapor infiltration (CVI) to simultaneously deposit each of the three separate carbides, e.g., UC, ZrC, and NbC in a single CVI step. By using CVI, the nuclear fuel may be deposited inside of a highly porous skeletal structure made of, for example, reticulated vitreous carbon foam.

Youchison, Dennis L. (Albuquerque, NM); Williams, Brian E. (Pacoima, CA); Benander, Robert E. (Pacoima, CA)

2011-03-01T23:59:59.000Z

188

An evaluation of thermal modeling techniques utilized for nuclear fuel rods  

E-Print Network (OSTI)

like to thank my graduate advisor, Dr. K. L. Peddicord, for his technical advice and guidance throughout this project and my studies in Nuclear Engineering at Texas AgiM University. Thanks are also extended to Dr. Hassan and Dr. Caton for reviewing.... Burnup Fission Gas Rdease Fuel Tltermal Conductivity Fuel Cracking Fuel Creep Rate Fuel Relocadon Fuel VIrermal Expansion Fuel Rod Tltermal Power Fuel Telltpelanaes Fuel Stress es Fuel Strains Fission Rate Fuel-Cladding Gap Heat...

Simmons, Jeffrey Warren

2012-06-07T23:59:59.000Z

189

TOWARDS BENCHMARK MEASUREMENTS FOR USED NUCLEAR FUEL ASSAY USING A LEAD SLOWING-DOWN SPECTROMETER  

E-Print Network (OSTI)

for spent fuel testing. The characterization of spent fuel is particularly important for nuclear safeguardsTOWARDS BENCHMARK MEASUREMENTS FOR USED NUCLEAR FUEL ASSAY USING A LEAD SLOWING-DOWN SPECTROMETER B) is considered as a possible option for non- destructive assay of fissile material in used nuclear fuel

Danon, Yaron

190

Software: Reactor Physics and Fuel Cycle Analysis - Nuclear Engineering  

NLE Websites -- All DOE Office Websites (Extended Search)

Analysis > Analysis > Software Capabilities Nuclear Systems Modeling and Design Analysis Reactor Physics and Fuel Cycle Analysis Overview Current Projects Software Nuclear Plant Dynamics and Safety Nuclear Data Program Advanced Reactor Development Nuclear Waste Form and Repository Performance Modeling Nuclear Energy Systems Design and Development Other Capabilities Work with Argonne Contact us For Employees Site Map Help Join us on Facebook Follow us on Twitter NE on Flickr Reactor Physics and Fuel Cycle Analysis Software Bookmark and Share An extensive powerful suite of computer codes developed and validated by the NE Division and its predecessor divisions at Argonne supports the development of fast reactors; many of these codes are also applicable to other reactor types. A brief description of these codes follows. Contact

191

Nuclear Waste Imaging and Spent Fuel Verification by Muon Tomography  

E-Print Network (OSTI)

This paper explores the use of cosmic ray muons to image the contents of shielded containers and detect high-Z special nuclear materials inside them. Cosmic ray muons are a naturally occurring form of radiation, are highly penetrating and exhibit large scattering angles on high Z materials. Specifically, we investigated how radiographic and tomographic techniques can be effective for non-invasive nuclear waste characterization and for nuclear material accountancy of spent fuel inside dry storage containers. We show that the tracking of individual muons, as they enter and exit a structure, can potentially improve the accuracy and availability of data on nuclear waste and the contents of Dry Storage Containers (DSC) used for spent fuel storage at CANDU plants. This could be achieved in near real time, with the potential for unattended and remotely monitored operations. We show that the expected sensitivity, in the case of the DSC, exceeds the IAEA detection target for nuclear material accountancy.

Jonkmans, G; Jewett, C; Thompson, M

2012-01-01T23:59:59.000Z

192

Need for tighter controls over fuel purchased by the Postal Service  

SciTech Connect

The US Postal Service uses nearly 90 million gallons of gasoline and diesel fuel each year. In fiscal year 1980, the cost of this fuel was expected to be $100 million, and the cost will increase as fuel prices continue to rise. This GAO study finds that the Service needs to change the way it controls fuel. To reduce the susceptibility to fraud, abuse, and waste in the procurement and use of fuel, GAO recommends that the Postmaster General vigorously enforce procedures for verifying fuel deliveries, including maintaining verification records for independent audit; initiate a program to test the quality of fuel received; insure that guidelines for bulk-tank security are followed at all facilities; insure that all fuel dispensed from bulk fuel tanks is accounted for; require drivers to obtain receipts from commercial service stations or record fuel and oil purchases on documents controlled by the Postal Service; and obtain better data on the use of fuel by vehicle drivers.

Staats, E.B.

1980-07-31T23:59:59.000Z

193

A framework and methodology for nuclear fuel cycle transparency.  

SciTech Connect

A key objective to the global deployment of nuclear technology is maintaining transparency among nation-states and international communities. By providing an environment in which to exchange scientific and technological information regarding nuclear technology, the safe and legitimate use of nuclear material and technology can be assured. Many nations are considering closed or multiple-application nuclear fuel cycles and are subsequently developing advanced reactors in an effort to obtain some degree of energy self-sufficiency. Proliferation resistance features that prevent theft or diversion of nuclear material and reduce the likelihood of diversion from the civilian nuclear power fuel cycle are critical for a global nuclear future. IAEA Safeguards have been effective in minimizing opportunities for diversion; however, recent changes in the global political climate suggest implementation of additional technology and methods to ensure the prompt detection of proliferation. For a variety of reasons, nuclear facilities are becoming increasingly automated and will require minimum manual operation. This trend provides an opportunity to utilize the abundance of process information for monitoring proliferation risk, especially in future facilities. A framework that monitors process information continuously can lead to greater transparency of nuclear fuel cycle activities and can demonstrate the ability to resist proliferation associated with these activities. Additionally, a framework designed to monitor processes will ensure the legitimate use of nuclear material. This report describes recent efforts to develop a methodology capable of assessing proliferation risk in support of overall plant transparency. The framework may be tested at the candidate site located in Japan: the Fuel Handling Training Model designed for the Monju Fast Reactor at the International Cooperation and Development Training Center of the Japan Atomic Energy Agency.

McClellan, Yvonne; York, David L.; Inoue, Naoko (Japan Atomic Energy Agency, Ibaraki, Japan); Love, Tracia L.; Rochau, Gary Eugene

2006-02-01T23:59:59.000Z

194

International nuclear fuel cycle fact book. [Contains glossary  

SciTech Connect

As the US Department of Energy (DOE) and DOE contractors have become increasingly involved with other nations in nuclear fuel cycle and waste management cooperative activities, a need has developed for a ready source of information concerning foreign fuel cycle programs, facilities, and personnel. This Fact Book was compiled to meet that need. The information contained has been obtained from nuclear trade journals and newsletters; reports of foreign visits and visitors; CEC, IAEA, and OECD/NEA activities reports; proceedings of conferences and workshops; and so forth. Sources do not agree completely with each other, and the data listed herein does not reflect any one single source but frequently is a consolidation/combination of information. Lack of space as well as the intent and purpose of the Fact Book limit the given information to that pertaining to the Nuclear Fuel Cycle and to data considered of primary interest or most helpful to the majority of users.

Leigh, I.W.; Lakey, L.T.; Schneider, K.J.; Silviera, D.J.

1987-01-01T23:59:59.000Z

195

International Nuclear Fuel Cycle Fact Book. Revision 12  

SciTech Connect

As the US Department of Energy (DOE) and DOE contractors have become increasingly involved with other nations in nuclear fuel cycle and waste management cooperative activities, a need exists costs for a ready source of information concerning foreign fuel cycle programs, facilities, and personnel. This Fact Book has been compiled to meet that need. The information contained in the International Nuclear Fuel Cycle Fact Book has been obtained from many unclassified sources: nuclear trade journals and newsletters; reports of foreign visits and visitors; CEC, IAEA, and OECD/NMEA activities reports; and proceedings of conferences and workshops. The data listed typically do not reflect any single source but frequently represent a consolidation/combination of information.

Leigh, I.W.

1992-05-01T23:59:59.000Z

196

An overview of measurement methods for special nuclear material in spent nuclear fuel  

SciTech Connect

Summary results from a survey of nondestructive assay measurement methods applicable to the measurement of the special nuclear material content of spent nuclear fuel are described. The role of nuclear materials measurements in the domestic and international safeguarding of spent nuclear fuel in the United States' federal waste management system has yet to be determined. An understanding of the characteristics and capabilities of the potentially applicable measurement systems should provide valuable information to the developers of the safeguards approaches for the monitored retrievable storage and final disposal systems. The discussion focuses on the general characteristics of the identified direct and indirect measurement methods. 3 refs., 1 tab.

Moran, B.W.; Reich, W.J.

1989-07-01T23:59:59.000Z

197

Fuel cycle cost uncertainty from nuclear fuel cycle comparison  

SciTech Connect

This paper examined the uncertainty in fuel cycle cost (FCC) calculation by considering both model and parameter uncertainty. Four different fuel cycle options were compared in the analysis including the once-through cycle (OT), the DUPIC cycle, the MOX cycle and a closed fuel cycle with fast reactors (FR). The model uncertainty was addressed by using three different FCC modeling approaches with and without the time value of money consideration. The relative ratios of FCC in comparison to OT did not change much by using different modeling approaches. This observation was consistent with the results of the sensitivity study for the discount rate. Two different sets of data with uncertainty range of unit costs were used to address the parameter uncertainty of the FCC calculation. The sensitivity study showed that the dominating contributor to the total variance of FCC is the uranium price. In general, the FCC of OT was found to be the lowest followed by FR, MOX, and DUPIC. But depending on the uranium price, the FR cycle was found to have lower FCC over OT. The reprocessing cost was also found to have a major impact on FCC.

Li, J.; McNelis, D. [Institute for the Environment, University of North Carolina, Chapel Hill (United States); Yim, M.S. [Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology (Korea, Republic of)

2013-07-01T23:59:59.000Z

198

Double-clad nuclear-fuel safety rod  

DOE Patents (OSTI)

A device for shutting down a nuclear reactor during an undercooling or overpower event, whether or not the reactor's scram system operates properly. This is accomplished by double-clad fuel safety rods positioned at various locations throughout the reactor core, wherein melting of a secondary internal cladding of the rod allows the fuel column therein to shift from the reactor core to place the reactor in a subcritical condition.

McCarthy, W.H.; Atcheson, D.B.

1981-12-30T23:59:59.000Z

199

Apparatus for injection casting metallic nuclear energy fuel rods  

DOE Patents (OSTI)

Molds for making metallic nuclear fuel rods are provided which present reduced risks to the environment by reducing radioactive waste. In one embodiment, the mold is consumable with the fuel rod, and in another embodiment, part of the mold can be re-used. Several molds can be arranged together in a cascaded manner, if desired, or several long cavities can be integrated in a monolithic multiple cavity re-usable mold.

Seidel, Bobby R. (Idaho Falls, ID); Tracy, Donald B. (Firth, ID); Griffiths, Vernon (Butte, MT)

1991-01-01T23:59:59.000Z

200

Synergistic smart fuel for in-pile nuclear reactor measurements  

SciTech Connect

The thermo-acoustic fuel rod sensor developed in this research has demonstrated a novel technique for monitoring the temperature within the core of a nuclear reactor or the temperature of the surrounding heat-transfer fluid. It uses the heat from the nuclear fuel to generate sustained acoustic oscillations whose frequency will be indicative of the temperature. Converting a nuclear fuel rod into this type of thermo-acoustic sensor simply requires the insertion of a porous material (stack). This sensor has demonstrated a synergy with the elevated temperatures that exist within the nuclear reactor using materials that have only minimal susceptibility to high-energy particle fluxes. When the sensor is in operation, the sound waves radiated from the fuel rod resonator will propagate through the surrounding cooling fluid. The frequency of these oscillations is directly correlated with an effective temperature within the fuel rod resonator. This device is self-powered and is operational even in case of total loss of power of the reactor.

Smith, J.A.; Kotter, D.K. [Idaho National Laboratories, Idaho Falls (United States); Ali, R.A.; Garrett, S.L. [Penn State University, University Park, State College, PA 16801 (United States)

2013-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Pantex receives National Weather Service recognition | National Nuclear  

NLE Websites -- All DOE Office Websites (Extended Search)

National Weather Service recognition | National Nuclear National Weather Service recognition | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > NNSA Blog > Pantex receives National Weather Service recognition Pantex receives National Weather Service recognition Posted By Office of Public Affairs On the plains of the Texas Panhandle, it pays to be ready for unpredictable

202

KCP employee celebrates 55 years of service | National Nuclear Security  

National Nuclear Security Administration (NNSA)

employee celebrates 55 years of service | National Nuclear Security employee celebrates 55 years of service | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > NNSA Blog > KCP employee celebrates 55 years of service KCP employee celebrates 55 years of service Posted By Office of Public Affairs Ray Rempe, KCP employee for 55 years In the summer of 1957, a postage stamp

203

Western New York Nuclear Service Center: History | Department...  

Office of Environmental Management (EM)

History Western New York Nuclear Service Center: History Presentation made by Paul J. Bembia for the NTSF annual meeting held from May 14-16, 2013 in Buffalo, NY Western New York...

204

Environmental Impact of the Nuclear Fuel Cycle: Fate of Actinides  

SciTech Connect

The resurgence of nuclear power as a strategy for reducing greenhouse gas (GHG) emissions has, in parallel, revived interest in the environmental impact of actinides. Just as GHG emissions are the main environmental impact of the combustion of fossil fuels, the fate of actinides, consumed and produced by nuclear reactions, determines whether nuclear power is viewed as an environmentally “friendly” source of energy. In this article, we summarize the sources of actinides in the nuclear fuel cycle, how actinides are separated by chemical processing, the development of actinide-bearing materials, and the behavior of actinides in the environment. At each stage, actinides present a unique and complicated behavior because of the 5f electronic configurations.

Ewing, Rodney C.; Runde, W.; Albrecht-Schmitt, Thomas E.

2010-01-01T23:59:59.000Z

205

Spark Plasma Sintering of Fuel Cermets for Nuclear Reactor Applications  

SciTech Connect

The feasibility of the fabrication of tungsten based nuclear fuel cermets via Spark Plasma Sintering (SPS) is investigated in this work. CeO2 is used to simulate fuel loadings of UO2 or Mixed-Oxide (MOX) fuels within tungsten-based cermets due to the similar properties of these materials. This study shows that after a short time sintering, greater than 90 % density can be achieved, which is suitable to possess good strength as well as the ability to contain fission products. The mechanical properties and the densities of the samples are also investigated as functions of the applied pressures during the sintering.

Yang Zhong; Robert C. O'Brien; Steven D. Howe; Nathan D. Jerred; Kristopher Schwinn; Laura Sudderth; Joshua Hundley

2011-11-01T23:59:59.000Z

206

Characterization of Nuclear Fuel using Multivariate Statistical Analysis  

SciTech Connect

Various combinations of reactor type and fuel composition have been characterized using principle components analysis (PCA) of the concentrations of 9 U and Pu isotopes in the 10 fuel as a function of burnup. The use of PCA allows the reduction of the 9-dimensional data (isotopic concentrations) into a 3-dimensional approximation, giving a visual representation of the changes in nuclear fuel composition with burnup. Real-world variation in the concentrations of {sup 234}U and {sup 236}U in the fresh (unirradiated) fuel was accounted for. The effects of reprocessing were also simulated. The results suggest that, 15 even after reprocessing, Pu isotopes can be used to determine both the type of reactor and the initial fuel composition with good discrimination. Finally, partial least squares discriminant analysis (PSLDA) was investigated as a substitute for PCA. Our results suggest that PLSDA is a better tool for this application where separation between known classes is most important.

Robel, M; Robel, M; Robel, M; Kristo, M J; Kristo, M J

2007-11-27T23:59:59.000Z

207

Sensitivity analysis and optimization of the nuclear fuel cycle  

SciTech Connect

A sensitivity study has been conducted to assess the robustness of the conclusions presented in the MIT Fuel Cycle Study. The Once Through Cycle (OTC) is considered as the base-line case, while advanced technologies with fuel recycling characterize the alternative fuel cycles. The options include limited recycling in LWRs and full recycling in fast reactors and in high conversion LWRs. Fast reactor technologies studied include both oxide and metal fueled reactors. The analysis allowed optimization of the fast reactor conversion ratio with respect to desired fuel cycle performance characteristics. The following parameters were found to significantly affect the performance of recycling technologies and their penetration over time: Capacity Factors of the fuel cycle facilities, Spent Fuel Cooling Time, Thermal Reprocessing Introduction Date, and in core and Out-of-core TRU Inventory Requirements for recycling technology. An optimization scheme of the nuclear fuel cycle is proposed. Optimization criteria and metrics of interest for different stakeholders in the fuel cycle (economics, waste management, environmental impact, etc.) are utilized for two different optimization techniques (linear and stochastic). Preliminary results covering single and multi-variable and single and multi-objective optimization demonstrate the viability of the optimization scheme. (authors)

Passerini, S.; Kazimi, M. S.; Shwageraus, E. [Massachusetts Inst. of Technology, Dept. of Nuclear Science and Engineering, 77 Massachusetts Avenue, Cambridge, MA 02138 (United States)

2012-07-01T23:59:59.000Z

208

Nuclear Fuel Cycle Reasoner: PNNL FY13 Report  

SciTech Connect

In Fiscal Year 2012 (FY12) PNNL implemented a formal reasoning framework and applied it to a specific challenge in nuclear nonproliferation. The Semantic Nonproliferation Analysis Platform (SNAP) was developed as a preliminary graphical user interface to demonstrate the potential power of the underlying semantic technologies to analyze and explore facts and relationships relating to the nuclear fuel cycle (NFC). In Fiscal Year 2013 (FY13) the SNAP demonstration was enhanced with respect to query and navigation usability issues.

Hohimer, Ryan E.; Strasburg, Jana D.

2013-09-30T23:59:59.000Z

209

E-Print Network 3.0 - alternative nuclear fuel Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

Summary: of electricity from nuclear power plants is far less than any of the alternative energy technologies now contem... Processing of Nuclear Fuel, EGRN 430 ...

210

Development of a nuclear fuel cycle transparency framework.  

SciTech Connect

Nuclear fuel cycle transparency can be defined as a confidence building approach among political entities to ensure civilian nuclear facilities are not being used for the development of nuclear weapons. Transparency concepts facilitate the transfer of nuclear technology, as the current international political climate indicates a need for increased methods of assuring non-proliferation. This research develops a system which will augment current non-proliferation assessment activities undertaken by U.S. and international regulatory agencies. It will support the export of nuclear technologies, as well as the design and construction of Gen. IV energy systems. Additionally, the framework developed by this research will provide feedback to cooperating parties, thus ensuring full transparency of a nuclear fuel cycle. As fuel handling activities become increasingly automated, proliferation or diversion potential of nuclear material still needs to be assessed. However, with increased automation, there exists a vast amount of process data to be monitored. By designing a system that monitors process data continuously, and compares this data to declared process information and plant designs, a faster and more efficient assessment of proliferation risk can be made. Figure 1 provides an illustration of the transparency framework that has been developed. As shown in the figure, real-time process data is collected at the fuel cycle facility; a reactor, a fabrication plant, or a recycle facility, etc. Data is sent to the monitoring organization and is assessed for proliferation risk. Analysis and recommendations are made to cooperating parties, and feedback is provided to the facility. The analysis of proliferation risk is based on the following factors: (1) Material attractiveness: the quantification of factors relevant to the proliferation risk of a certain material (e.g., highly enriched Pu-239 is more attractive than that of lower enrichment) (2) The static (baseline) risk: the quantification of risk factors regarding the expected value of proliferation risk under normal (not proliferating) operations. (3) The dynamic (changing) risk: the quantification of risk factors regarding the observed value of proliferation risk, based on monitor signals from facility operations. This framework could be implemented at facilities which have been exported (for instance, to third world countries), or facilities located in sensitive countries. Sandia National Laboratories is currently working with the Japan Nuclear Cycle Development Institute (JNC) to implement a demonstration of nuclear fuel cycle transparency technology at the Fuel Handling Training Model designed for the Monju Fast Reactor at the International Cooperation and Development Training Center in Japan. This technology has broad applications, both in the U.S. and abroad. Following the demonstration, we expect to begin further testing of the technology at an Enrichment Facility, a Fast Reactor, and at a Recycle Facility.

Love, Tracia L.

2005-04-01T23:59:59.000Z

211

Interim report spent nuclear fuel retrieval system fuel handling development testing  

SciTech Connect

Fuel handling development testing was performed in support of the Fuel Retrieval System (FRS) Sub-Project at the Hanford Site. The project will retrieve spent nuclear fuel, clean and remove fuel from canisters, repackage fuel into baskets, and load fuel into a multi-canister overpack (MCO) for vacuum drying and interim dry storage. The FRS is required to retrieve basin fuel canisters, clean fuel elements sufficiently of uranium corrosion products (or sludge), empty fuel from canisters, sort debris and scrap from whole elements, and repackage fuel in baskets in preparation for MCO loading. The purpose of fuel handling development testing was to examine the systems ability to accomplish mission activities, optimization of equipment layouts for initial process definition, identification of special needs/tools, verification of required design changes to support performance specification development, and validation of estimated activity times/throughput. The test program was set up to accomplish this purpose through cold development testing using simulated and prototype equipment; cold demonstration testing using vendor expertise and systems; and graphical computer modeling to confirm feasibility and throughput. To test the fuel handling process, a test mockup that represented the process table was fabricated and installed. The test mockup included a Schilling HV series manipulator that was prototypic of the Schilling Hydra manipulator. The process table mockup included the tipping station, sorting area, disassembly and inspection zones, fuel staging areas, and basket loading stations. The test results clearly indicate that the Schilling Hydra arm cannot effectively perform the fuel handling tasks required unless it is attached to some device that can impart vertical translation, azimuth rotation, and X-Y translation. Other test results indicate the importance of camera locations and capabilities, and of the jaw and end effector tool design. 5 refs., 35 figs., 3 tabs.

Ketner, G.L.; Meeuwsen, P.V.; Potter, J.D.; Smalley, J.T.; Baker, C.P.; Jaquish, W.R.

1997-06-01T23:59:59.000Z

212

MANAGEMENT OF SPENT NUCLEAR FUEL IN FINLAND: POLICY, PAST AND PRESENT PRACTICES, PLANS FOR THE FUTURE  

Science Journals Connector (OSTI)

In Finland, about 1700 tU of spent nuclear fuel has arisen from the operation of the four nuclear power units which were commissioned in late ... 1980’s. Initially the spent fuel management policy was based on se...

E. RUOKOLA

2006-01-01T23:59:59.000Z

213

Sizing particles of natural uranium and nuclear fuels using poly-allyl-diglycol carbonate autoradiography  

Science Journals Connector (OSTI)

......particles of natural uranium and nuclear fuels...low enriched, depleted and natural uranium and also aged...committed doses and cancer risks(4...Bristol, UK, sized uranium fragments found...nuclear fuels of depleted uranium (depUO2......

G. Hegyi; R. B. Richardson

2008-07-01T23:59:59.000Z

214

E-Print Network 3.0 - apex nuclear fuel Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

nuclear fuel Search Powered by Explorit Topic List Advanced Search Sample search results for: apex nuclear fuel Page: << < 1 2 3 4 5 > >> 1 FY 2010 Highlights Faculty and Summary:...

215

Locations of Spent Nuclear Fuel and High-Level Radioactive Waste...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Locations of Spent Nuclear Fuel and High-Level Radioactive Waste Locations of Spent Nuclear Fuel and High-Level Radioactive Waste Map of the United States of America showing the...

216

Plasma processing of spent nuclear fuel by two-frequency ion cyclotron resonance heating  

Science Journals Connector (OSTI)

A previously developed method for analyzing the plasma processing of spent nuclear fuel is generalized to a plasma containing multicharged fuel ions. In such a plasma, ion cyclotron resonance heating of nuclear a...

A. V. Timofeev

2009-11-01T23:59:59.000Z

217

Greenhouse Gas Emissions from the Nuclear Fuel Cycle  

SciTech Connect

Since greenhouse gases are a global concern, rather than a local concern as are some kinds of effluents, one must compare the entire lifecycle of nuclear power to alternative technologies for generating electricity. A recent critical analysis by Sovacool (2008) gives a clearer picture. "It should be noted that nuclear power is not directly emitting greenhouse gas emissions, but rather that lifecycle emissions occur through plant construction, operation, uranium mining and milling, and plant decommissioning." "[N]uclear energy is in no way 'carbon free' or 'emissions free,' even though it is much better (from purely a carbon-equivalent emissions standpoint) than coal, oil, and natural gas electricity generators, but worse than renewable and small scale distributed generators" (Sovacool 2008). According to Sovacool, at an estimated 66 g CO2 equivalent per kilowatt-hour (gCO2e/kWh), nuclear power emits 15 times less CO2 per unit electricity generated than unscrubbed coal generation (at 1050 gCO2e/kWh), but 7 times more than the best renewable, wind (at 9 gCO2e/kWh). The U.S. Nuclear Regulatory Commission (2009) has long recognized CO2 emissions in its regulations concerning the environmental impact of the nuclear fuel cycle. In Table S-3 of 10 CFR 51.51(b), NRC lists a 1000-MW(electric) nuclear plant as releasing as much CO2 as a 45-MW(e) coal plant. A large share of the carbon emissions from the nuclear fuel cycle is due to the energy consumption to enrich uranium by the gaseous diffusion process. A switch to either gas centrifugation or laser isotope separation would dramatically reduce the carbon emissions from the nuclear fuel cycle.

Strom, Daniel J.

2010-03-01T23:59:59.000Z

218

Microscopic Examination of a Corrosion Front in Spent Nuclear Fuel  

SciTech Connect

Spent uranium oxide nuclear fuel hosts a variety of trace chemical constituents, many of which must be sequestered from the biosphere during fuel storage and disposal. In this paper we present synchrotron x-ray absorption spectroscopy and microscopy findings that illuminate the resultant local chemistry of neptunium and plutonium within spent uranium oxide nuclear fuel before and after corrosive alteration in an air-saturated aqueous environment. We find the plutonium and neptunium in unaltered spent fuel to have a +4 oxidation state and an environment consistent with solid-solution in the UO{sub 2} matrix. During corrosion in an air-saturated aqueous environment, the uranium matrix is converted to uranyl U(VI)O{sub 2}{sup 2+} mineral assemblage that is depleted in plutonium and neptunium relative to the parent fuel. At the corrosion front interface between intact fuel and the uranyl-mineral corrosion layer, we find evidence of a thin ({approx}20 micrometer) layer that is enriched in plutonium and neptunium within a predominantly U{sup 4+} environment. Available data for the standard reduction potentials for NpO{sup 2+}/Np{sup 4+} and UO{sub 2}{sup 2+}/U{sup 4+} couples indicate that Np(IV) may not be effectively oxidized to Np(V) at the corrosion potentials of uranium dioxide spent nuclear fuel in air-saturated aqueous solutions. Neptunium is an important radionuclide in dose contribution according to performance assessment models of the proposed U. S. repository at Yucca Mountain, Nevada. A scientific understanding of how the UO{sub 2} matrix of spent nuclear fuel impacts the oxidative dissolution and reductive precipitation of neptunium is needed to predict its behavior at the fuel surface during aqueous corrosion. Neptunium would most likely be transported as aqueous Np(V) species, but for this to occur it must first be oxidized from the Np(IV) state found within the parent spent nuclear fuel [1]. In the immediate vicinity of the spent fuel's surface the redox and nucleation behavior is likely to promote/enhance nucleation of NpO{sub 2} and Np{sub 2}O{sub 5}. Alternatively, Np may be incorporated into uranyl (UO{sub 2}{sup 2+}) alteration phases [2]. In some cases, less-soluble elements such as plutonium will be enriched near the surface of the corroding fuel [3]. We have used focused synchrotron x-rays from the MRCAT beam line at the Advanced Photon Source (APS) at Argonne National Lab to examine a specimen of spent nuclear fuel that had been subject to 10 years of corrosion testing in an environment of humid air and dripping groundwater at 90 C [4]. We find evidence of a region, approximately 20 microns in thickness, enriched in plutonium and neptunium at the corrosion front that exists between the uranyl silicate alteration mineral rind and the unaltered uranium oxide fuel (Figures 1 and 2). The uranyl silicate is itself found to be depleted in these transuranic elements relative to their abundance relative to uranium in the parent fuel. This suggests a low mobility of these components owing to a resistance to oxidize further in the presence of a UO{sub 2}{sup 2+}/U{sup 4+} couple [5].

J.A> Fortner; A.J. Kropf; R.J. Finch; J.C. Cunnane

2006-06-20T23:59:59.000Z

219

Environmental Program Services Contract | National Nuclear Security...  

National Nuclear Security Administration (NNSA)

Learn More Environmental Program Services Contract Related Topics apm contracts contracting Related News Security Improvements Project Completed Ahead of Schedule, 20 Million...

220

Standard guide for drying behavior of spent nuclear fuel  

E-Print Network (OSTI)

1.1 This guide is organized to discuss the three major components of significance in the drying behavior of spent nuclear fuel: evaluating the need for drying, drying spent nuclear fuel, and confirmation of adequate dryness. 1.1.1 The guide addresses drying methods and their limitations in drying spent nuclear fuels that have been in storage at water pools. The guide discusses sources and forms of water that remain in SNF, its container, or both, after the drying process and discusses the importance and potential effects they may have on fuel integrity, and container materials. The effects of residual water are discussed mechanistically as a function of the container thermal and radiological environment to provide guidance on situations that may require extraordinary drying methods, specialized handling, or other treatments. 1.1.2 The basic issue in drying is to determine how dry the SNF must be in order to prevent issues with fuel retrievability, container pressurization, or container corrosion. Adequate d...

American Society for Testing and Materials. Philadelphia

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Alternative Fuels Data Center: Support for U.S. Postal Service Use of  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

U.S. U.S. Postal Service Use of Natural Gas to someone by E-mail Share Alternative Fuels Data Center: Support for U.S. Postal Service Use of Natural Gas on Facebook Tweet about Alternative Fuels Data Center: Support for U.S. Postal Service Use of Natural Gas on Twitter Bookmark Alternative Fuels Data Center: Support for U.S. Postal Service Use of Natural Gas on Google Bookmark Alternative Fuels Data Center: Support for U.S. Postal Service Use of Natural Gas on Delicious Rank Alternative Fuels Data Center: Support for U.S. Postal Service Use of Natural Gas on Digg Find More places to share Alternative Fuels Data Center: Support for U.S. Postal Service Use of Natural Gas on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

222

List of Texas Fuel Mitigation Vendors This list of fuel mitigation vendors that offer services in Texas is divided into two groups  

E-Print Network (OSTI)

List of Texas Fuel Mitigation Vendors This list of fuel mitigation vendors that offer services as a service to communities and landowners seeking assistance with fuel mitigation practices on their land Service Area Mu, Be, CP, Sc, Mo, FB Page 1 of 4Last updated on 10/16/2013 #12;List of Fuel Mitigation

Behmer, Spencer T.

223

Changing Biomass, Fossil, and Nuclear Fuel Cycles for Sustainability  

SciTech Connect

The energy and chemical industries face two great sustainability challenges: the need to avoid climate change and the need to replace crude oil as the basis of our transport and chemical industries. These challenges can be met by changing and synergistically combining the fossil, biomass, and nuclear fuel cycles.

Forsberg, Charles W [ORNL

2007-01-01T23:59:59.000Z

224

Method of controlling crystallite size in nuclear-reactor fuels  

DOE Patents (OSTI)

Improved spherules for making enhanced forms of nuclear-reactor fuels are prepared by internal gelation procedures within a sol-gel operation and are accomplished by first boiling the concentrated HMTA-urea feed solution before engaging in the spherule-forming operation thereby effectively controlling crystallite size in the product spherules.

Lloyd, Milton H. (Oak Ridge, TN); Collins, Jack L. (Knoxville, TN); Shell, Sam E. (Oak Ridge, TN)

1985-01-01T23:59:59.000Z

225

Methods and apparatuses for the development of microstructured nuclear fuels  

DOE Patents (OSTI)

Microstructured nuclear fuel adapted for nuclear power system use includes fissile material structures of micrometer-scale dimension dispersed in a matrix material. In one method of production, fissile material particles are processed in a chemical vapor deposition (CVD) fluidized-bed reactor including a gas inlet for providing controlled gas flow into a particle coating chamber, a lower bed hot zone region to contain powder, and an upper bed region to enable powder expansion. At least one pneumatic or electric vibrator is operationally coupled to the particle coating chamber for causing vibration of the particle coater to promote uniform powder coating within the particle coater during fuel processing. An exhaust associated with the particle coating chamber and can provide a port for placement and removal of particles and powder. During use of the fuel in a nuclear power reactor, fission products escape from the fissile material structures and come to rest in the matrix material. After a period of use in a nuclear power reactor and subsequent cooling, separation of the fissile material from the matrix containing the embedded fission products will provide an efficient partitioning of the bulk of the fissile material from the fission products. The fissile material can be reused by incorporating it into new microstructured fuel. The fission products and matrix material can be incorporated into a waste form for disposal or processed to separate valuable components from the fission products mixture.

Jarvinen, Gordon D. (Los Alamos, NM); Carroll, David W. (Los Alamos, NM); Devlin, David J. (Santa Fe, NM)

2009-04-21T23:59:59.000Z

226

The Overlooked Back End of the Nuclear Fuel Cycle  

Science Journals Connector (OSTI)

...long-term plan for the disposal of nuclear waste...in new fuel and disposal of the subsequent...geologic repository at Yucca Mountain, Nevada, but the...repository for final disposal. To establish...constant source of funding is required to...

Allison M. Macfarlane

2011-09-02T23:59:59.000Z

227

Nuclear Fuel Cycle Reasoner: PNNL FY12 Report  

SciTech Connect

Building on previous internal investments and leveraging ongoing advancements in semantic technologies, PNNL implemented a formal reasoning framework and applied it to a specific challenge in nuclear nonproliferation. The Semantic Nonproliferation Analysis Platform (SNAP) was developed as a preliminary graphical user interface to demonstrate the potential power of the underlying semantic technologies to analyze and explore facts and relationships relating to the nuclear fuel cycle (NFC). In developing this proof of concept prototype, the utility and relevancy of semantic technologies to the Office of Defense Nuclear Nonproliferation Research and Development (DNN R&D) has been better understood.

Hohimer, Ryan E.; Pomiak, Yekaterina G.; Neorr, Peter A.; Gastelum, Zoe N.; Strasburg, Jana D.

2013-05-03T23:59:59.000Z

228

Dry storage of spent nuclear fuel in UAE – Economic aspect  

Science Journals Connector (OSTI)

Abstract Cost analysis of dry storage of spent nuclear fuel (SNF) discharged from Barakah nuclear power plants in the UAE was performed using three variables: average fuel discharge rate (FD), discount rate (d), and cooling time in a spent fuel pool (Tcool). The costs of dry storage as an interim spent fuel storage option in the UAE were estimated and compared between the following two scenarios: Scenario 1 is ‘accelerated transfer of spent fuel to dry storage’ that SNF will be transferred to dry storage facilities as soon as spent fuel has been sufficiently cooled down in a pool for the dry storage; Scenario 2 is defined as ‘maximum use of spent fuel pool’ that SNF will be stored in a pool as long as possible till the amount of stored SNF in the pool reaches the capacity of the pools and, then, to be moved to dry storage. A sensitivity analysis on the costs was performed and multiple regression analysis was applied to the resulting net present values (NPVs) for Scenarios 1 and 2 and ?NPV that is difference in the net present values between the two scenarios. The results showed that \\{NPVs\\} and ?NPV could be approximately expressed by single equations with the three variables. Among the three variables, the discount rate had the largest effect on the \\{NPVs\\} of the dry storage costs. However, ?NPV was turned out to be equally sensitive to the discount rate and cooling period. Over the ranges of the variables, the additional cost for accelerated fuel transfer (Scenario 1) ranged from 86.4 to 212.9 million $. Calculated using the maximum difference (212.9 M$) between the two scenarios, the accelerated fuel transfer to dry storage could incur the additional electricity rate 8.0 × 10?5 USD/kWh, which is not considered to be significant, compared to the overall electricity generation cost.

Sara Al Saadi; Yongsun Yi

2015-01-01T23:59:59.000Z

229

Survey of Dynamic Simulation Programs for Nuclear Fuel Reprocessing  

SciTech Connect

The absence of any industrial scale nuclear fuel reprocessing in the U.S. has precluded the necessary driver for developing the advanced simulation capability now prevalent in so many other industries. Modeling programs to simulate the dynamic behavior of nuclear fuel separations and processing were originally developed to support the US government’s mission of weapons production and defense fuel recovery. Consequently there has been little effort is the US devoted towards improving this specific process simulation capability during the last two or three decades. More recent work has been focused on elucidating chemical thermodynamics and developing better models of predicting equilibrium in actinide solvent extraction systems. These equilibrium models have been used to augment flowsheet development and testing primarily at laboratory scales. The development of more robust and complete process models has not kept pace with the vast improvements in computational power and user interface and is significantly behind simulation capability in other chemical processing and separation fields.

Troy J. Tranter; Daryl R. Haefner

2008-06-01T23:59:59.000Z

230

Ceramic-composite waste forms from the electrometallurgical treatment of spent nuclear fuel  

Science Journals Connector (OSTI)

Argonne National Laboratory is developing a method to treat spent nuclear fuel in a molten-salt electrorefiner. Glass...

C. Pereira; M. Hash; M. Lewis; M. Richmann

1997-07-01T23:59:59.000Z

231

Nuclear Fuel in a Reactor Accident  

Science Journals Connector (OSTI)

...Three Mile Island: A report to the commissioners and to the public” (Nuclear Regulatory Commission, Washington, DC, 1980). 5...Podcast The contents of this podcast interview represent the opinion of the author and may go beyond the content of the published...

Peter C. Burns; Rodney C. Ewing; Alexandra Navrotsky

2012-03-09T23:59:59.000Z

232

Gamma Ray Mirrors for Direct Measurement of Spent Nuclear Fuel  

SciTech Connect

Direct measurement of the amount of Pu and U in spent nuclear fuel represents a challenge for the safeguards community. Ideally, the characteristic gamma-ray emission lines from different isotopes provide an observable suitable for this task. However, these lines are generally lost in the fierce flux of radiation emitted by the fuel. The rates are so high that detector dead times limit measurements to only very small solid angles of the fuel. Only through the use of carefully designed view ports and long dwell times are such measurements possible. Recent advances in multilayer grazing-incidence gamma-ray optics provide one possible means of overcoming this difficulty. With a proper optical and coating design, such optics can serve as a notch filter, passing only narrow regions of the overall spectrum to a fully shielded detector that does not view the spent fuel directly. We report on the design of a mirror system and a number of experimental measurements.

Pivovaroff, Dr. Michael J. [Lawrence Livermore National Laboratory (LLNL)] [Lawrence Livermore National Laboratory (LLNL); Ziock, Klaus-Peter [ORNL] [ORNL; Harrison, Mark J [ORNL] [ORNL; Soufli, Regina [Lawrence Livermore National Laboratory (LLNL)] [Lawrence Livermore National Laboratory (LLNL)

2014-01-01T23:59:59.000Z

233

Verifiable Fuel Cycle Simulation Model (VISION): A Tool for Analyzing Nuclear Fuel Cycle Futures  

SciTech Connect

The nuclear fuel cycle consists of a set of complex components that are intended to work together. To support the nuclear renaissance, it is necessary to understand the impacts of changes and timing of events in any part of the fuel cycle system such as how the system would respond to each technological change, a series of which moves the fuel cycle from where it is to a postulated future state. The system analysis working group of the United States research program on advanced fuel cycles (formerly called the Advanced Fuel Cycle Initiative) is developing a dynamic simulation model, VISION, to capture the relationships, timing, and changes in and among the fuel cycle components to help develop an understanding of how the overall fuel cycle works. This paper is an overview of the philosophy and development strategy behind VISION. The paper includes some descriptions of the model components and some examples of how to use VISION. For example, VISION users can now change yearly the selection of separation or reactor technologies, the performance characteristics of those technologies, and/or the routing of material among separation and reactor types - with the model still operating on a PC in <5 min.

Jacob J. Jacobson; Steven J. Piet; Gretchen E. Matthern; David E. Shropshire; Robert F. Jeffers; A. M. Yacout; Tyler Schweitzer

2010-11-01T23:59:59.000Z

234

Gap Analysis to Support Extended Storage of Used Nuclear Fuel | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Gap Analysis to Support Extended Storage of Used Nuclear Fuel Gap Analysis to Support Extended Storage of Used Nuclear Fuel Gap Analysis to Support Extended Storage of Used Nuclear Fuel The U.S. Department of Energy Office of Nuclear Energy (DOE-NE), Office of Fuel Cycle Technology, has established the Used Fuel Disposition Campaign (UFDC) to conduct the research and development activities related to storage, transportation, and disposal of used nuclear fuel and high-level radioactive waste. The mission of the UFDC is to identify alternatives and conduct scientific research and technology development to enable storage, transportation and disposal of used nuclear fuel (UNF) and wastes generated by existing and future nuclear fuel cycles. The Storage and Transportation staff within the UFDC are responsible for addressing issues regarding the

235

Strategy for the Management and Disposal of Used Nuclear Fuel and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Strategy for the Management and Disposal of Used Nuclear Fuel and Strategy for the Management and Disposal of Used Nuclear Fuel and High-Level Radioactive Waste Strategy for the Management and Disposal of Used Nuclear Fuel and High-Level Radioactive Waste The Strategy for the Management and Disposal of Used Nuclear Fuel and High-Level Radioactive Waste is a framework for moving toward a sustainable program to deploy an integrated system capable of transporting, storing, and disposing of used nuclear fuel and high-level radioactive waste from civilian nuclear power generation, defense, national security and other activities. Strategy for the Management and Disposal of Used Nuclear Fuel and High-Level Radioactive Waste More Documents & Publications Strategy for the Management and Disposal of Used Nuclear Fuel and High-Level Radioactive Waste

236

Strategy for the Management and Disposal of Used Nuclear Fuel and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Strategy for the Management and Disposal of Used Nuclear Fuel and Strategy for the Management and Disposal of Used Nuclear Fuel and High-Level Radioactive Waste Strategy for the Management and Disposal of Used Nuclear Fuel and High-Level Radioactive Waste Issued on January 11, 2013, the Strategy for the Management and Disposal of Used Nuclear Fuel and High-Level Radioactive Waste is a framework for moving toward a sustainable program to deploy an integrated system capable of transporting, storing, and disposing of used nuclear fuel and high-level radioactive waste from civilian nuclear power generation, defense, national security and other activities. Strategy for the Management and Disposal of Used Nuclear Fuel and High Level Radioactive Waste.pdf More Documents & Publications Strategy for the Management and Disposal of Used Nuclear Fuel and

237

Commercial Spent Nuclear Fuel Waste Package Misload Analysis  

SciTech Connect

The purpose of this calculation is to estimate the probability of misloading a commercial spent nuclear fuel waste package with a fuel assembly(s) that has a reactivity (i.e., enrichment and/or burnup) outside the waste package design. The waste package designs are based on the expected commercial spent nuclear fuel assemblies and previous analyses (Macheret, P. 2001, Section 4.1 and Table 1). For this calculation, a misloaded waste package is defined as a waste package that has a fuel assembly(s) loaded into it with an enrichment and/or burnup outside the waste package design. An example of this type of misload is a fuel assembly designated for the 21-PWR Control Rod waste package being incorrectly loaded into a 21-PWR Absorber Plate waste package. This constitutes a misloaded 21-PWR Absorber Plate waste package, because the reactivity (i.e., enrichment and/or burnup) of a 21-PWR Control Rod waste package fuel assembly is outside the design of a 21-PWR Absorber Plate waste package. These types of misloads (i.e., fuel assembly with enrichment and/or burnup outside waste package design) are the only types that are evaluated in this calculation. This calculation utilizes information from ''Frequency of SNF Misload for Uncanistered Fuel Waste Package'' (CRWMS M&O 1998) as the starting point. The scope of this calculation is limited to the information available. The information is based on the whole population of fuel assemblies and the whole population of waste packages, because there is no information about the arrival of the waste stream at this time. The scope of this calculation deviates from that specified in ''Technical Work Plan for: Risk and Criticality Department'' (BSC 2002a, Section 2.1.30) in that only waste package misload is evaluated. The remaining issues identified (i.e., flooding and geometry reconfiguration) will be addressed elsewhere. The intended use of the calculation is to provide information and inputs to the Preclosure Safety Analysis Department. Before using the results of this calculation, the reader is cautioned to verify that the assumptions made in this calculation regarding the waste stream, the loading process, and the staging of the spent nuclear fuel assemblies are applicable.

A. Alsaed

2005-07-28T23:59:59.000Z

238

Commercial Spent Nuclear Fuel Waste Package Misload Analysis  

SciTech Connect

The purpose of this calculation is to estimate the probability of misloading a commercial spent nuclear fuel waste package with a fuel assembly(s) that has a reactivity (i.e., enrichment and/or burnup) outside the waste package design. The waste package designs are based on the expected commercial spent nuclear fuel assemblies and previous analyses (Macheret, P. 2001, Section 4.1 and Table 1). For this calculation, a misloaded waste package is defined as a waste package that has a fuel assembly(s) loaded into it with an enrichment and/or burnup outside the waste package design. An example of this type of misload is a fuel assembly designated for the 21-PWR Control Rod waste package being incorrectly loaded into a 21-PWR Absorber Plate waste package. This constitutes a misloaded 21-PWR Absorber Plate waste package, because the reactivity (i.e., enrichment and/or burnup) of a 21-PWR Control Rod waste package fuel assembly is outside the design of a 21-PWR Absorber Plate waste package. These types of misloads (i.e., fuel assembly with enrichment and/or burnup outside waste package design) are the only types that are evaluated in this calculation. This calculation utilizes information from ''Frequency of SNF Misload for Uncanistered Fuel Waste Package'' (CRWMS M&O 1998) as the starting point. The scope of this calculation is limited to the information available. The information is based on the whole population of fuel assemblies and the whole population of waste packages, because there is no information about the arrival of the waste stream at this time. The scope of this calculation deviates from that specified in ''Technical Work Plan for: Risk and Criticality Department'' (BSC 2002a, Section 2.1.30) in that only waste package misload is evaluated. The remaining issues identified (i.e., flooding and geometry reconfiguration) will be addressed elsewhere. The intended use of the calculation is to provide information and inputs to the Preclosure Safety Analysis Department. Before using the results of this calculation, the reader is cautioned to verify that the assumptions made in this calculation regarding the waste stream, the loading process, and the staging of the spent nuclear fuel assemblies are applicable.

J.K. Knudson

2003-10-02T23:59:59.000Z

239

Cost Savings of Nuclear Power with Total Fuel Reprocessing  

SciTech Connect

The cost of fast reactor (FR) generated electricity with pyro-processing is estimated in this article. It compares favorably with other forms of energy and is shown to be less than that produced by light water reactors (LWR's). FR's use all the energy in natural uranium whereas LWR's utilize only 0.7% of it. Because of high radioactivity, pyro-processing is not open to weapon material diversion. This technology is ready now. Nuclear power has the same advantage as coal power in that it is not dependent upon a scarce foreign fuel and has the significant additional advantage of not contributing to global warming or air pollution. A jump start on new nuclear plants could rapidly allow electric furnaces to replace home heating oil furnaces and utilize high capacity batteries for hybrid automobiles: both would reduce US reliance on oil. If these were fast reactors fueled by reprocessed fuel, the spent fuel storage problem could also be solved. Costs are derived from assumptions on the LWR's and FR's five cost components: 1) Capital costs: LWR plants cost $106/MWe. FR's cost 25% more. Forty year amortization is used. 2) The annual O and M costs for both plants are 9% of the Capital Costs. 3) LWR fuel costs about 0.0035 $/kWh. Producing FR fuel from spent fuel by pyro-processing must be done in highly shielded hot cells which is costly. However, the five foot thick concrete walls have the advantage of prohibiting diversion. LWR spent fuel must be used as feedstock for the FR initial core load and first two reloads so this FR fuel costs more than LWR fuel. FR fuel costs much less for subsequent core reloads (< LWR fuel) if all spent fuel feedstock is from the fast reactor (i.e., Breeding Ratio =1). 4) Yucca Mountain storage of unprocessed LWR spent fuel is estimated as $360,000/MTHM. But this fuel can be processed to remove TRU for use as fast reactor fuel. The remaining fission products repository costs are only one fifth that of the original fuel. Storage of short half life fission products alone requires less storage time and long term integrity than LWR spent fuel (300 years storage versus 100,000 years.) 5) LWR decommissioning costs are estimated to be $0.3 x 10{sup 6}/MWe. The annual cost for a 40 year licensed plant would be 2.5 % of this or less if interest is taken into account. All plants will eventually have to replace those components which become radiation damaged. FR's should be designed to replace parts rather than decommission. The LWR costs are estimated to be 2.65 cents/kWh. FR costs are 2.99 cents/kWh for the first 7.5 years and 2.39 cents/kWh for the next 32.5 years. The average cost over forty years is 2.50 cents/kWh which is less than the LWR costs. These power costs are similar to coal power, are lower than gas, oil, and much lower than renewable power.(authors)

Solbrig, Charles W.; Benedict, Robert W. [Fuel Cycle Programs Division, Idaho National Laboratory, Idaho Falls, Idaho (United States)

2006-07-01T23:59:59.000Z

240

Mechanical Properties of Nuclear Fuel Surrogates using Picosecond Laser Ultrasonics  

SciTech Connect

Detailed understanding between microstructure evolution and mechanical properties is important for designing new high burnup nuclear fuels. In this presentation we discuss the use of picosecond ultrasonics to measure localize changes in mechanical properties of fuel surrogates. We develop measurement techniques that can be applied to investigate heterogeneous elastic properties caused by localize changes in chemistry, grain microstructure caused by recrystallization, and mechanical properties of small samples prepared using focused ion beam sample preparation. Emphasis is placed on understanding the relationship between microstructure and mechanical properties

David Hurley; Marat Khafizov; Farhad Farzbod; Eric Burgett

2013-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Optimal Intercity Transportation Services with Heterogeneous Demand and Variable Fuel Price.  

E-Print Network (OSTI)

??In this thesis we examine how fuel price variation affects the optimal mix of services in intercity transportation. Towards this end, we make two main… (more)

Ryerson, Megan Smirti

2010-01-01T23:59:59.000Z

242

Marine fuels. (Latest citations from Information Services in Mechanical Engineering database). Published Search  

SciTech Connect

The bibliography contains citations concerning research and experimentation, fuel system design, future demands, contrast and comparisons, and applications of various marine engine fuels and lubricants. Residual fuel oils, coal powered steam propulsion, homogenizing and treating fuels, coal liquefication, diesel fuel power, electrical power, gas turbines, waste exhaust heat-energy recovery systems, exhaust emissions, water-emulsified fuels, conservation, and nuclear fuels are among the topics discussed. Developments in fuels and their effects on power plant wear are included. (Contains 250 citations and includes a subject term index and title list.)

Not Available

1993-07-01T23:59:59.000Z

243

New York Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","5,271",13.4,"41,870",30.6 "Coal","2,781",7.1,"13,583",9.9 "Hydro and Pumped Storage","5,714",14.5,"24,942",18.2 "Natural Gas","17,407",44.2,"48,916",35.7 "Other1",45,0.1,832,0.6 "Other Renewable1","1,719",4.4,"4,815",3.5 "Petroleum","6,421",16.3,"2,005",1.5 "Total","39,357",100.0,"136,962",100.0

244

South Carolina Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","6,486",27.0,"51,988",49.9 "Coal","7,230",30.1,"37,671",36.2 "Hydro and Pumped Storage","4,006",16.7,"1,442",1.4 "Natural Gas","5,308",22.1,"10,927",10.5 "Other1","-","-",61,0.1 "Other Renewable1",284,1.2,"1,873",1.8 "Petroleum",670,2.8,191,0.2 "Total","23,982",100.0,"104,153",100.0

245

Nuclear reactor vessel fuel thermal insulating barrier  

DOE Patents (OSTI)

The reactor vessel of a nuclear reactor installation which is suspended from the cold leg nozzles in a reactor cavity is provided with a lower thermal insulating barrier spaced from the reactor vessel that has a hemispherical lower section that increases in volume from the center line of the reactor to the outer extent of the diameter of the thermal insulating barrier and smoothly transitions up the side walls of the vessel. The space between the thermal insulating harrier and the reactor vessel forms a chamber which can be flooded with cooling water through passive valving to directly cool the reactor vessel in the event of a severe accident. The passive inlet valve for the cooling water includes a buoyant door that is normally maintained sealed under its own weight and floats open when the cavity is Hooded. Passively opening steam vents are also provided.

Keegan, C. Patrick; Scobel, James H.; Wright, Richard F.

2013-03-19T23:59:59.000Z

246

North Carolina Nuclear Profile - All Fuels  

U.S. Energy Information Administration (EIA) Indexed Site

total electric power industry, summer capacity and net generation, by energy source, 2010" total electric power industry, summer capacity and net generation, by energy source, 2010" "Primary energy source","Summer capacity (mw)","Share of State total (percent)","Net generation (thousand mwh)","Share of State total (percent)" "Nuclear","4,958",17.9,"40,740",31.7 "Coal","12,766",46.1,"71,951",55.9 "Hydro and Pumped Storage","2,042",7.4,"4,757",3.7 "Natural Gas","6,742",24.4,"8,447",6.6 "Other1",50,0.2,407,0.3 "Other Renewable1",543,2.0,"2,083",1.6 "Petroleum",573,2.1,293,0.2 "Total","27,674",100.0,"128,678",100.0

247

Conditioning of spent nuclear fuel for permanent disposal  

SciTech Connect

A compact, efficient method for conditioning spent nuclear fuel is under development. This method, known as pyrochemical processing, or pyroprocessing, provides a separation of fission products from the actinide elements present in spent fuel and further separates pure uranium from the transuranic elements. The process can facilitate the timely and environmentally-sound treatment of the highly diverse collection of spent fuel currently in the inventory of the US Department of Energy (DOE). The pyroprocess utilizes elevated-temperature processes to prepare spent fuel for fission product separation; that separation is accomplished by a molten salt electrorefining step that provides efficient (> 99.9%) separation of transuranics. The resultant waste forms from the pyroprocess are stable under envisioned repository environment conditions and highly leach-resistant. Treatment of any spent fuel type produces a set of common high-level waste forms, one a mineral and the other a metal alloy, that can be readily qualified for repository disposal and that avoid the substantial costs that would be associated with the qualification of the numerous spent fuel types included in the DOE inventory.

Laidler, J.J. [Argonne National Lab., IL (United States). Chemical Technology Div.

1994-12-31T23:59:59.000Z

248

Conditioning of spent nuclear fuel for permanent disposal  

SciTech Connect

A compact, efficient method for conditioning spent nuclear fuel is under development This method, known as pyrochemical processing, or {open_quotes}pyroprocessing,{close_quotes} provides a separation of fission products from the actinide elements present in spent fuel and further separates pure uranium from the transuranic elements. The process can facilitate the timely and environmentally-sound treatment of the highly diverse collection of spent fuel currently in the inventory of the United States Department of Energy (DOE). The pyroprocess utilizes elevated-temperature processes to prepare spent fuel for fission product separation; that separation is accomplished by a molten salt electrorefining step that provides efficient (99.9%) separation of transuranics. The resultant waste forms from the pyroprocess are stable under envisioned repository environment conditions and highly leach-resistant. Treatment of any spent fuel type produces a set of common high-level waste forms, one a mineral and the other a metal alloy, that can be readily qualified for repository disposal and preclude the substantial costs that would be associated with the qualification of the numerous spent fuel types included in the DOE inventory.

Laidler, J.J.

1994-10-01T23:59:59.000Z

249

EIS-0306: Treatment and Management of Sodium-Bonded Spent Nuclear Fuel |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

306: Treatment and Management of Sodium-Bonded Spent Nuclear 306: Treatment and Management of Sodium-Bonded Spent Nuclear Fuel EIS-0306: Treatment and Management of Sodium-Bonded Spent Nuclear Fuel Summary This EIS evaluates the potential environmental impacts of the proposed electrometallurgical treatment of DOE-owned sodium bonded spent nuclear fuel in the Fuel Conditioning Facility at Argonne National Laboratory-West (ANL-W). Public Comment Opportunities None available at this time. Documents Available for Download September 19, 2000 EIS-0306: Record of Decision Treatment and Management of Sodium-Bonded Spent Nuclear Fuel July 1, 2000 EIS-0306: Final Environmental Impact Statement Treatment and Management of Sodium-Bonded Spent Nuclear Fuel July 1, 1999 EIS-0306: Draft Environmental Impact Statement Treatment of Sodium-Bonded Spent Nuclear Fuel

250

U.S. Commits $14 million to U.S. - Ukraine Nuclear Fuel Qualification  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commits $14 million to U.S. - Ukraine Nuclear Fuel Commits $14 million to U.S. - Ukraine Nuclear Fuel Qualification Project U.S. Commits $14 million to U.S. - Ukraine Nuclear Fuel Qualification Project March 15, 2007 - 10:55am Addthis KYIV, Ukraine - U.S. Department of Energy Deputy Secretary Clay Sell today announced that the United States will invest $14 million to provide 42 nuclear fuel assemblies to the South Ukraine Nuclear Power Plant under the U.S.-Ukraine Nuclear Fuel Qualification Project (UNFQP). In an agreement reached last week, Westinghouse Electric Company will manufacture nuclear fuel assemblies, which account for one-fourth of the fuel that powers a reactor for up to four years of operation. Deputy Secretary Sell is in Kyiv today to meet with top Ukrainian officials and U.S. business leaders to promote diversity of energy sources, greater energy efficiency,

251

Fuel cycle analysis of once-through nuclear systems.  

SciTech Connect

Once-through fuel cycle systems are commercially used for the generation of nuclear power, with little exception. The bulk of these once-through systems have been water-cooled reactors (light-water and heavy water reactors, LWRs and HWRs). Some gas-cooled reactors are used in the United Kingdom. The commercial power systems that are exceptions use limited recycle (currently one recycle) of transuranic elements, primarily plutonium, as done in Europe and nearing deployment in Japan. For most of these once-through fuel cycles, the ultimate storage of the used (spent) nuclear fuel (UNF, SNF) will be in a geologic repository. Besides the commercial nuclear plants, new once-through concepts are being proposed for various objectives under international advanced nuclear fuel cycle studies and by industrial and venture capital groups. Some of the objectives for these systems include: (1) Long life core for remote use or foreign export and to support proliferation risk reduction goals - In these systems the intent is to achieve very long core-life with no refueling and limited or no access to the fuel. Most of these systems are fast spectrum systems and have been designed with the intent to improve plant economics, minimize nuclear waste, enhance system safety, and reduce proliferation risk. Some of these designs are being developed under Generation IV International Forum activities and have generally not used fuel blankets and have limited the fissile content of the fuel to less than 20% for the purpose on meeting international nonproliferation objectives. In general, the systems attempt to use transuranic elements (TRU) produced in current commercial nuclear power plants as this is seen as a way to minimize the amount of the problematic radio-nuclides that have to be stored in a repository. In this case, however, the reprocessing of the commercial LWR UNF to produce the initial fuel will be necessary. For this reason, some of the systems plan to use low enriched uranium (LEU) fuels. Examples of systems in this class include the small modular reactors being considered internationally; e.g. 4S [Tsuboi 2009], Hyperion Power Module [Deal 2010], ARC-100 [Wade 2010], and SSTAR [Smith 2008]. (2) Systems for Resource Utilization - In recent years, interest has developed in the use of advanced nuclear designs for the effective utilization of fuel resources. Systems under this class have generally utilized the breed and burn concept in which fissile material is bred and used in situ in the reactor core. Due to the favorable breeding that is possible with fast neutrons, these systems have tended to be fast spectrum systems. In the once-through concepts (as opposed to the traditional multirecycle approach typically considered for fast reactors), an ignition (or starter) zone contains driver fuel which is fissile material. This zone is designed to last a long time period to allow the breeding of sufficient fissile material in the adjoining blanket zone. The blanket zone is initially made of fertile depleted uranium fuel. This zone could also be made of fertile thorium fuel or recovered uranium from fuel reprocessing or natural uranium. However, given the bulk of depleted uranium and the potentially large inventory of recovered uranium, it is unlikely that the use of thorium is required in the near term in the U.S. Following the breeding of plutonium or fissile U-233 in the blanket, this zone or assembly then carries a larger fraction of the power generation in the reactor. These systems tend to also have a long cycle length (or core life) and they could be with or without fuel shuffling. When fuel is shuffled, the incoming fuel is generally depleted uranium (or thorium) fuel. In any case, fuel is burned once and then discharged. Examples of systems in this class include the CANDLE concept [Sekimoto 2001], the traveling wave reactor (TWR) concept of TerraPower [Ellis 2010], the ultra-long life fast reactor (ULFR) by ANL [Kim 2010], and the BNL fast mixed spectrum reactor (FMSR) concept [Fisher 1979]. (3) Thermal systems for resource extensio

Kim, T. K.; Taiwo, T. A.; Nuclear Engineering Division

2010-08-10T23:59:59.000Z

252

Categorization of Used Nuclear Fuel Inventory in Support of a Comprehensive  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorization of Used Nuclear Fuel Inventory in Support of a Categorization of Used Nuclear Fuel Inventory in Support of a Comprehensive National Nuclear Fuel Cycle Strategy Categorization of Used Nuclear Fuel Inventory in Support of a Comprehensive National Nuclear Fuel Cycle Strategy The Office of Nuclear Energy has conducted a technical review and assessment of the total current inventory [~70,150 MTHM as of 2011] of domestic discharged used nuclear fuel (UNF) and estimated an amount to be considered for retention in support of research, development, demonstration, and national security interests. The study recognizes that: 1) access to some amount of UNF is needed to support RD&D; 2) the two principal options for addressing UNF management are geologic disposal and recycling, and 3) U.S. nuclear power plants will continue to discharge

253

Department of Energy Awards $15 Million for Nuclear Fuel Cycle Technology  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

15 Million for Nuclear Fuel Cycle 15 Million for Nuclear Fuel Cycle Technology Research and Development Department of Energy Awards $15 Million for Nuclear Fuel Cycle Technology Research and Development August 1, 2008 - 2:40pm Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced it will award up to $15 million to 34 research organizations as part of the Department's Advanced Fuel Cycle Initiative (AFCI). AFCI is the Department's nuclear energy research and development program supporting the long-term goals and objectives of the United States' nuclear energy policy. These projects will provide necessary data and analyses to further U.S. nuclear fuel cycle technology development, meet the need for advanced nuclear energy production and help to close the nuclear fuel cycle

254

Detachable connection for a nuclear reactor fuel assembly  

DOE Patents (OSTI)

A locking connection for releasably attaching a handling socket to the duct tube of a fuel assembly for a nuclear reactor. The connection comprises a load pad housing mechanically attached to the duct tube and a handling socket threadably secured within the housing. A retaining ring is interposed between the housing and the handling socket and is formed with a projection and depression engageable within a cavity and groove of the housing and handling socket, respectively, to form a detachable interlocked connection assembly.

Christiansen, David W. (Kennewick, WA); Karnesky, Richard A. (Richland, WA)

1986-01-01T23:59:59.000Z

255

Method for cleaning solution used in nuclear fuel reprocessing  

DOE Patents (OSTI)

Nuclear fuel processing solution consisting of tri-n-butyl phosphate and dodecane, with a complex of uranium, plutonium, or zirconium and with a solvent degradation product such as di-n-butyl phosphate therein, is contacted with an aqueous solution of a salt formed from hydrazine and either a dicarboxylic acid or a hydroxycarboxylic acid, thereby removing the aforesaid complex from the processing solution.

Tallent, O.K.; Crouse, D.J.; Mailen, J.C.

1980-12-17T23:59:59.000Z

256

Financing Strategies For A Nuclear Fuel Cycle Facility  

SciTech Connect

To help meet the nation’s energy needs, recycling of partially used nuclear fuel is required to close the nuclear fuel cycle, but implementing this step will require considerable investment. This report evaluates financing scenarios for integrating recycling facilities into the nuclear fuel cycle. A range of options from fully government owned to fully private owned were evaluated using DPL (Decision Programming Language 6.0), which can systematically optimize outcomes based on user-defined criteria (e.g., lowest lifecycle cost, lowest unit cost). This evaluation concludes that the lowest unit costs and lifetime costs are found for a fully government-owned financing strategy, due to government forgiveness of debt as sunk costs. However, this does not mean that the facilities should necessarily be constructed and operated by the government. The costs for hybrid combinations of public and private (commercial) financed options can compete under some circumstances with the costs of the government option. This analysis shows that commercial operations have potential to be economical, but there is presently no incentive for private industry involvement. The Nuclear Waste Policy Act (NWPA) currently establishes government ownership of partially used commercial nuclear fuel. In addition, the recently announced Global Nuclear Energy Partnership (GNEP) suggests fuels from several countries will be recycled in the United States as part of an international governmental agreement; this also assumes government ownership. Overwhelmingly, uncertainty in annual facility capacity led to the greatest variations in unit costs necessary for recovery of operating and capital expenditures; the ability to determine annual capacity will be a driving factor in setting unit costs. For private ventures, the costs of capital, especially equity interest rates, dominate the balance sheet; and the annual operating costs, forgiveness of debt, and overnight costs dominate the costs computed for the government case. The uncertainty in operations, leading to lower than optimal processing rates (or annual plant throughput), is the most detrimental issue to achieving low unit costs. Conversely, lowering debt interest rates and the required return on investments can reduce costs for private industry.

David Shropshire; Sharon Chandler

2006-07-01T23:59:59.000Z

257

NUCLEAR INFORMATION SERVICES AT THE NATIONAL NUCLEAR DATA CENTER.  

SciTech Connect

The National Nuclear Data Center has provided remote access to its databases and other resources since 1986. This year we have completed the modernization of our databases and Web site. Resources available from our Web site will be summarized and some of the major improvements described in more detail.

BURROWS,T.W.; DUNFORD,C.L.

2004-09-26T23:59:59.000Z

258

Nuclear fuel reprocessing and the problems of safeguarding against the spread of nuclear weapons  

SciTech Connect

In 1977, the executive branch reversed its long-standing support for nuclear fuel reprocessing, primarily because of the rick of spreading nuclear weapons. GAO reviewed safeguards technology designed to reduce such risks in Federal reprocessing facilities and found that concerns are warranted. Material in sufficient quantities to construct a nuclear weapon could be diverted and go undetected for a long time. Effective international control and safeguards over the production, storage, and use of separated plutonium are lacking. The United States should increase its efforts to: develop and ensure the use of effective safeguards for reprocessing facilities; and establish, in conjunction with major nuclear fuel users, suppliers, and reprocessors, an international system to control the storage and use of excess plutonium.

Staats, E.B.

1980-03-18T23:59:59.000Z

259

RADIOLOGICAL HEALTH AND RELATED STANDARDS FOR NUCLEAR POWER PLANTS. VOLUME 2 OF HEALTH AND SAFETY IMPACTS OF NUCLEAR, GEOTHERMAL, AND FOSSIL-FUEL ELECTRIC GENERATION IN CALIFORNIA  

E-Print Network (OSTI)

Health and Safety Aspects of Pro- posed Nuclear, Geothermal, and Fossil-FuelHEALTH AND SAFETY IMPACTS OF NUCLEAR, GEOTHERMAL, AND FOSSIL-FUELHealth and Safety Impacts of Nuclear, Geothermal, and Fossil- Fuel

Nero, A.V.

2010-01-01T23:59:59.000Z

260

Fuel Cell Experience & Opportunities: U.S. Postal Service  

NLE Websites -- All DOE Office Websites (Extended Search)

Experience & Opportunities Experience & Opportunities - U.S. Postal Service - Ray Levinson October 27 th 2008 ~34,000 Buildings ~313,000,000 sq. ft. 27,938 BBTUs per year 89,270 BTUs/sq. ft. 6.0 million MWH, 6.3 million therms $560,000,000 Annual Energy Cost Pacific Area: About 10% of above, except for energy cost ($80 million, or about 14%) USPS Facility Energy Data - FY 07 Stationary Building Base Load - CHP: Hot Water Vehicles Powered Industrial Trucks (P.I.T.) These include tow motors, fork trucks, tractors, platform lift trucks, motorized hand trucks, and other specialized industrial trucks powered by electric motors or internal combustion engines. Fuel Cell Opportunities Chevron: Jim Kleiser, Sr. Engr (415) 733-4589 -jkleiser@chevron.com Subcontractors ACCO Engineered Systems -

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Pyroprocessing oxide spent nuclear fuels for efficient disposal  

SciTech Connect

Pyrochemical processing as a means for conditioning spent nuclear fuels for disposal offers significant advantages over the direct disposal option. The advantages include reduction in high-level waste volume; conversion of most of the high-level waste to a low-level waste in which nearly all the transuranics (TRU) have been removed; and incorporation of the TRUs into a stable, highly radioactive waste form suitable for interim storage, ultimate destruction, or repository disposal. The lithium process has been under development at Argonne National Laboratory for use in pyrochemical conditioning of spent fuel for disposal. All of the process steps have been demonstrated in small-scale (0.5-kg simulated spent fuel) experiments. Engineering-scale (20-kg simulated spent fuel) demonstration of the process is underway, and small-scale experiments have been conducted with actual spent fuel from a light water reactor (LWR). The lithium process is simple, operates at relatively low temperatures, and can achieve high decontamination factors for the TRU elements. Ordinary materials, such as carbon steel, can be used for process containment.

McPheeters, C.C.; Pierce, R.D.; Mulcahey, T.P. [Argonne National Lab., IL (United States). Chemical Technology Div.

1994-12-31T23:59:59.000Z

262

Synergistic energy conversion processes using nuclear energy and fossil fuels  

Science Journals Connector (OSTI)

This paper reviews the methods of producing energy carriers, such as electricity, hydrocarbons and hydrogen, by utilising both nuclear energy and fossil fuels synergistically. There are many possibilities for new, innovative, synergistic processes, which combine chemical and nuclear systems for efficient, clean and economical production of energy carriers. Besides the individual processes by each form of energy to produce the energy carriers, the synergistic processes which use two primary energies to produce the energy carriers will become important with the features of resource saving, CO2 emission reduction and economic production, due to the higher conversion efficiency and low cost of nuclear heat. The synergistic processes will be indispensable to the 21st century, when efficient best-mixed supplies of available primary energies are crucial.

Masao Hori

2009-01-01T23:59:59.000Z

263

Foreign Research Reactor Spent Nuclear Fuel Acceptance Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Global Threat Reduction Initiative: Global Threat Reduction Initiative: U.S. Nuclear Remove Program Foreign Research Reactor Spent Nuclear Fuel (FRR SNF) Acceptance 2007 DOE TEC Meeting Chuck Messick DOE/NNSA/SRS 2 Contents * Program Objective and Policy * Program implementation status * Shipment Information * Operational Logistics * Lessons Learned * Conclusion 3 U.S. Nuclear Remove Program Objective * To play a key role in the Global Threat Reduction Remove Program supporting permanent threat reduction by accepting program eligible material. * Works in conjunction with the Global Threat Reduction Convert Program to accept program eligible material as an incentive to core conversion providing a disposition path for HEU and LEU during the life of the Acceptance Program. 4 Reasons for the Policy

264

U.S. Department of Energy Accident Resistant SiC Clad Nuclear Fuel  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Accident Resistant SiC Clad Nuclear Fuel U.S. Department of Energy Accident Resistant SiC Clad Nuclear Fuel Development U.S. Department of Energy Accident Resistant SiC Clad Nuclear Fuel Development A significant effort is being placed on silicon carbide ceramic matrix composite (SiC CMC) nuclear fuel cladding by Light Water Reactor Sustainability (LWRS) Advanced Light Water Reactor Nuclear Fuels Pathway. The intent of this work is to invest in a high-risk, high-reward technology that can be introduced in a relatively short time. The LWRS goal is to demonstrate successful advanced fuels technology that suitable for commercial development to support nuclear relicensing. Ceramic matrix composites are an established non-nuclear technology that utilizes ceramic fibers embedded in a ceramic matrix. A thin interfacial layer between the

265

DOE Seeks to Invest up to $15 Million in Funding for Nuclear Fuel Cycle  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Seeks to Invest up to $15 Million in Funding for Nuclear Fuel DOE Seeks to Invest up to $15 Million in Funding for Nuclear Fuel Cycle Technology Research and Development DOE Seeks to Invest up to $15 Million in Funding for Nuclear Fuel Cycle Technology Research and Development April 17, 2008 - 10:49am Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today issued a Funding Opportunity Announcement (FOA) inviting universities, national laboratories, and industry to compete for up to $15 million to advance nuclear technologies closing the nuclear fuel cycle. These projects will provide necessary data and analyses to further U.S. nuclear fuel cycle technology development, as part of the Department's Advanced Fuel Cycle Initiative (AFCI), the domestic technology R&D component of the Global Nuclear Energy Partnership (GNEP). Studies resulting from this FOA will

266

DOE Seeks to Invest up to $15 Million in Funding for Nuclear Fuel Cycle  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Seeks to Invest up to $15 Million in Funding for Nuclear Fuel Seeks to Invest up to $15 Million in Funding for Nuclear Fuel Cycle Technology Research and Development DOE Seeks to Invest up to $15 Million in Funding for Nuclear Fuel Cycle Technology Research and Development April 17, 2008 - 10:49am Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today issued a Funding Opportunity Announcement (FOA) inviting universities, national laboratories, and industry to compete for up to $15 million to advance nuclear technologies closing the nuclear fuel cycle. These projects will provide necessary data and analyses to further U.S. nuclear fuel cycle technology development, as part of the Department's Advanced Fuel Cycle Initiative (AFCI), the domestic technology R&D component of the Global Nuclear Energy Partnership (GNEP). Studies resulting from this FOA will

267

SUPPLEMENT ANALYSIS OF FOREIGN RESEARCH REACTOR srENT NUCLEAR FUEL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FOREIGN RESEARCH REACTOR srENT NUCLEAR FUEL FOREIGN RESEARCH REACTOR srENT NUCLEAR FUEL TRANSPORTATION ALONG OTHER THAN~. PRESENTATIVE ROUTE FROM CONCORD NAVAL WEAPO~~ STATION TO IDAHO NATIONAL ENGINEERING AND ENVIRONMENTAL LADORA TORY Introduction The Department of Energy is planning to transport foreign research reactor spent nuclear fuel by rail from the Concord Naval Weapons Station (CNWS), Concord, California, to the Idaho National Engineering and Environmental Laboratory (INEEL). The environmental analysis supporting the decision to transport, by rail or truck, foreign research reactor spent nuclear fuel from CNWS to the INEEL is contained in +he Final Environmental Impact Statement on a Proposed Nuclear Weapons Nonproliftration Policy Concerning Foreign Research Reactor

268

Fuel Cell Generation in Geo-Distributed Cloud Services: A Quantitative Study  

E-Print Network (OSTI)

Fuel Cell Generation in Geo-Distributed Cloud Services: A Quantitative Study Zhi Zhou1 Fangming Liu of fuel cell energy in cloud computing, yet it is unclear what and how much benefit it may bring. This paper, for the first time, attempts to quantitatively examine the benefits brought by fuel cell

Li, Baochun

269

U.S. Spent Nuclear Fuel Data as of December 31, 2002  

Gasoline and Diesel Fuel Update (EIA)

Home > Nuclear > Spent Nuclear Fuel Home > Nuclear > Spent Nuclear Fuel Release Date: October 1, 2004 Next Release: Late 2010** Spent nuclear fuel data is collected by the Energy Information Administration (EIA) for the Office of Civilian Radioactive Waste Management (OCRWM). The spent nuclear fuel (SNF) data includes detailed characteristics of SNF generated by commercial U.S. nuclear power plants. From 1983 through 1995 this data was collected annually. Since 1996 this data has been collected every three years. The latest available detailed data covers all SNF discharged from commercial reactors before December 31, 2002, and is maintained in a data base by the EIA. Summary data tables from this data base may be found as indicated below. Table 1. Total U.S. Commercial Spent Nuclear Fuel Discharges, 1968 - 2002

270

Comparative analysis of LWR and FBR spent fuels for nuclear forensics evaluation  

SciTech Connect

Some interesting issues are attributed to nuclide compositions of spent fuels from thermal reactors as well as fast reactors such as a potential to reuse as recycled fuel, and a possible capability to be manage as a fuel for destructive devices. In addition, analysis on nuclear forensics which is related to spent fuel compositions becomes one of the interesting topics to evaluate the origin and the composition of spent fuels from the spent fuel foot-prints. Spent fuel compositions of different fuel types give some typical spent fuel foot prints and can be estimated the origin of source of those spent fuel compositions. Some technics or methods have been developing based on some science and technological capability including experimental and modeling or theoretical aspects of analyses. Some foot-print of nuclear forensics will identify the typical information of spent fuel compositions such as enrichment information, burnup or irradiation time, reactor types as well as the cooling time which is related to the age of spent fuels. This paper intends to evaluate the typical spent fuel compositions of light water (LWR) and fast breeder reactors (FBR) from the view point of some foot prints of nuclear forensics. An established depletion code of ORIGEN is adopted to analyze LWR spent fuel (SF) for several burnup constants and decay times. For analyzing some spent fuel compositions of FBR, some coupling codes such as SLAROM code, JOINT and CITATION codes including JFS-3-J-3.2R as nuclear data library have been adopted. Enriched U-235 fuel composition of oxide type is used for fresh fuel of LWR and a mixed oxide fuel (MOX) for FBR fresh fuel. Those MOX fuels of FBR come from the spent fuels of LWR. Some typical spent fuels from both LWR and FBR will be compared to distinguish some typical foot-prints of SF based on nuclear forensic analysis.

Permana, Sidik; Suzuki, Mitsutoshi; Su'ud, Zaki [Department of Science and Technology for Nuclear Material Management (STNM), Japan Atomic Energy Agency (JAEA), 2-4 Shirane, Shirakata, Tokai Mura, Naka-gun, Ibaraki 319-1195 Nuclear Physics and Bio (Indonesia); Department of Science and Technology for Nuclear Material Management (STNM), Japan Atomic Energy Agency (JAEA), 2-4 Shirane, Shirakata, Tokai Mura, Naka-gun, Ibaraki 319-1195 (Japan); Nuclear Physics and Bio Physics Research Group, Department of Physics, Bandung Institute of Technology, Gedung Fisika, Jl. Ganesha 10, Bandung 40132 (Indonesia)

2012-06-06T23:59:59.000Z

271

EARTHQUAKE CAUSED RELEASES FROM A NUCLEAR FUEL CYCLE FACILITY  

SciTech Connect

The fuel cycle facility (FCF) at the Idaho National Laboratory is a nuclear facility which must be licensed in order to operate. A safety analysis is required for a license. This paper describes the analysis of the Design Basis Accident for this facility. This analysis involves a model of the transient behavior of the FCF inert atmosphere hot cell following an earthquake initiated breach of pipes passing through the cell boundary. The hot cell is used to process spent metallic nuclear fuel. Such breaches allow the introduction of air and subsequent burning of pyrophoric metals. The model predicts the pressure, temperature, volumetric releases, cell heat transfer, metal fuel combustion, heat generation rates, radiological releases and other quantities. The results show that releases from the cell are minimal and satisfactory for safety. This analysis method should be useful in other facilities that have potential for damage from an earthquake and could eliminate the need to back fit facilities with earthquake proof boundaries or lessen the cost of new facilities.

Charles W. Solbrig; Chad Pope; Jason Andrus

2014-08-01T23:59:59.000Z

272

Fuel Cycle Technologies Near Term Planning for Storage and Transportation of Used Nuclear Fuel  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fuels Storage Fuels Storage and Transportation Planning Project (NFST) Program Status Jeff Williams Project Director National Transportation Stakeholders Forum Buffalo, New York May 2013 2  "With the appropriate authorizations from Congress, the Administration currently plans to implement a program over the next 10 years that:  Sites, designs and licenses, constructs and begins operations of a pilot interim storage facility by 2021 with an initial focus on accepting used nuclear fuel from shut-down reactor sites;  Advances toward the siting and licensing of a larger interim storage facility to be available by 2025 that will have sufficient capacity to provide flexibility in the waste management system and allows for acceptance of enough used

273

Issues related to EM management of DOE spent nuclear fuel  

SciTech Connect

This document is a summary of the important issues involved in managing spent nuclear fuel (SNF) owned by the Department of Energy (DOE). Issues related to civilian SNF activities are not discussed. DOE-owned SNF is stored primarily at the Hanford Site, Idaho National Engineering Laboratory (INEL), Savannah River Site (SRS), Oak Ridge National Laboratory (ORNL), and West Valley Demonstration Project. Smaller quantities of SNF are stored at Brookhaven National Laboratory, Sandia National Laboratories, and Los Alamos National Laboratory (LANL). There is a wide variety of fuel types, including both low and high enrichment fuels from weapons production, DOE reactors, research and development programs, naval programs, and universities. Most fuel is stored in pools associated with reactor or reprocessing facilities. Smaller quantities are in dry storage. Physical conditions of the fuel range from excellent to poor or severely damaged. An issue is defined as an important question that must be answered or decision that must be made on a topic or subject relevant to achieving the complimentary objectives of (a) storing SNF in compliance with applicable regulations and orders until it can be disposed, and (b) safely disposing of DOE`s SNF. The purpose of this document is to define the issues; no recommendations are made on resolutions. As DOE`s national SNF management program is implemented, a system of issues identification, documentation, tracking, and resolution will be implemented. This document is an initial effort at issues identification. The first section of this document is an overview of issues that are common to several or all DOE facilities that manage SNF. The common issues are organized according to specific aspects of spent fuel management. This is followed by discussions of management issues that apply specifically to individual DOE facilities. The last section provides literature references.

Abbott, D.G. [EG& G Idaho, Inc., Idaho Falls, ID (United States); Abashian, M.S.; Chakraborti, S.; Roberson, K.; Meloin, J.M. [IT Corp. (United States)

1993-07-01T23:59:59.000Z

274

Sensitivity of economic performance of the nuclear fuel cycle to simulation modeling assumptions  

E-Print Network (OSTI)

Comparing different nuclear fuel cycles and assessing their implications require a fuel cycle simulation model as complete and realistic as possible. In this thesis, methodological implications of modeling choices are ...

Bonnet, Nicéphore

2007-01-01T23:59:59.000Z

275

Characterization of Zr-Fe-Cu Alloys for an Inert Matrix Fuel for Nuclear Energy Applications  

E-Print Network (OSTI)

An ultra-high burnup metallic inert matrix nuclear fuel concept is being characterized and evaluated by Lawrence Livermore National Laboratory based on a metal matrix fuel concept originally developed at the Bochvar Institute in Russia. The concept...

Barnhart, Brian A.

2013-08-09T23:59:59.000Z

276

An experiment to simulate the heat transfer properties of a dry, horizontal spent nuclear fuel assembly  

E-Print Network (OSTI)

Nuclear power reactors generate highly radioactive spent fuel assemblies. Initially, the spent fuel assemblies are stored for a period of several years in an on-site storage facility to allow the radioactivity levels of ...

Lovett, Phyllis Maria

1991-01-01T23:59:59.000Z

277

Sustainability Considerations in Spent Light-water Nuclear Fuel Retrievability  

SciTech Connect

This paper examines long-term cost differences between two competing Light Water Reactor (LWR) fuels: Uranium Oxide (UOX) and Mixed Uranium Oxide-Plutonium Oxide (MOX). Since these costs are calculated on a life-cycle basis, expected savings from lower future MOX fuel prices can be used to value the option of substituting MOX for UOX, including the value of maintaining access to the used UOX fuel that could be reprocessed to make MOX. The two most influential cost drivers are the price of natural uranium and the cost of reprocessing. Significant and sustained reductions in reprocessing costs and/or sustained increases in uranium prices are required to give positive value to the retrievability of Spent Nuclear Fuel. While this option has positive economic value, it might not be exercised for 50 to 200 years. Therefore, there are many years for a program during which reprocessing technology can be researched, developed, demonstrated, and deployed. Further research is required to determine whether the cost of such a program would yield positive net present value and/or increases the sustainability of LWR energy systems.

Wood, Thomas W.; Rothwell, Geoffrey

2012-01-10T23:59:59.000Z

278

OECD/NEA Ongoing activities related to the nuclear fuel cycle  

SciTech Connect

As part of its role in encouraging international collaboration, the OECD Nuclear Energy Agency is coordinating a series of projects related to the Nuclear Fuel Cycle. The Nuclear Science Committee (NSC) Working Party on Scientific Issues of the Nuclear Fuel Cycle (WPFC) comprises five different expert groups covering all aspects of the fuel cycle from front to back-end. Activities related to fuels, materials, physics, separation chemistry, and fuel cycles scenarios are being undertaken. By publishing state-of-the-art reports and organizing workshops, the groups are able to disseminate recent research advancements to the international community. Current activities mainly focus on advanced nuclear systems, and experts are working on analyzing results and establishing challenges associated to the adoption of new materials and fuels. By comparing different codes, the Expert Group on Advanced Fuel Cycle Scenarios is aiming at gaining further understanding of the scientific issues and specific national needs associated with the implementation of advanced fuel cycles. At the back end of the fuel cycle, separation technologies (aqueous and pyrochemical processing) are being assessed. Current and future activities comprise studies on minor actinides separation and post Fukushima studies. Regular workshops are also organized to discuss recent developments on Partitioning and Transmutation. In addition, the Nuclear Development Committee (NDC) focuses on the analysis of the economics of nuclear power across the fuel cycle in the context of changes of electricity markets, social acceptance and technological advances and assesses the availability of the nuclear fuel and infrastructure required for the deployment of existing and future nuclear power. The Expert Group on the Economics of the Back End of the Nuclear Fuel Cycle (EBENFC), in particular, is looking at assessing economic and financial issues related to the long term management of spent nuclear fuel. (authors)

Cornet, S.M. [OECD Nuclear Energy Agency, 12 Boulevard des Iles, 92130 Issy-les-Moulineaux (France); McCarthy, K. [Idaho Nat. Lab. - P.O. Box 1625, Idaho Falls, ID 83415-3860 (United States); Chauvin, N. [CEA Saclay, Nuclear Energy Division, 91191 Gif/Yvette (France)

2013-07-01T23:59:59.000Z

279

THERMODYNAMIC MODEL FOR URANIUM DIOXIDE BASED NUCLEAR FUEL  

SciTech Connect

Many projects involving nuclear fuel rest on a quantitative understanding of the co-existing phases at various stages of burnup. Since the many fission products have considerably different abilities to chemically associate with oxygen, and the oxygen-to-metal molar ratio is slowly changing, the chemical potential of oxygen is a function of burnup. Concurrently, well-recognized small fractions of new phases such as inert gas, noble metals, zirconates, etc. also develop. To further complicate matters, the dominant UO2 fuel phase may be non-stoichiometric and most of the minor phases themselves have a variable composition dependent on temperature and possible contact with the coolant in the event of a sheathing breach. A thermodynamic fuel model to predict the phases in partially burned CANDU (CANada Deuterium Uranium) nuclear fuel containing many major fission products has been under development. The building blocks of the model are the standard Gibbs energies of formation of the many possible compounds expressed as a function of temperature. To these data are added mixing terms associated with the appearance of the component species in particular phases. In operational terms, the treatment rests on the ability to minimize the Gibbs energy in a multicomponent system, in our case using the algorithms developed by Eriksson. The model is capable of handling non-stoichiometry in the UO2 fluorite phase, dilute solution behaviour of significant solute oxides, noble metal inclusions, a second metal solid solution U(Pd-Rh-Ru)3, zirconate, molybdate, and uranate solutions as well as other minor solid phases, and volatile gaseous species.

Thompson, Dr. William T. [Royal Military College of Canada; Lewis, Dr. Brian J [Royal Military College of Canada; Corcoran, E. C. [Royal Military College of Canada; Kaye, Dr. Matthew H. [Royal Military College of Canada; White, S. J. [Royal Military College of Canada; Akbari, F. [Atomic Energy of Canada Limited, Chalk River Laboratories; Higgs, Jamie D. [Atomic Energy of Canada Limited, Point Lepreau; Thompson, D. M. [Praxair Inc.; Besmann, Theodore M [ORNL; Vogel, S. C. [Los Alamos National Laboratory (LANL)

2007-01-01T23:59:59.000Z

280

Plasma processing of spent nuclear fuel by two-frequency ion cyclotron resonance heating  

SciTech Connect

A previously developed method for analyzing the plasma processing of spent nuclear fuel is generalized to a plasma containing multicharged fuel ions. In such a plasma, ion cyclotron resonance heating of nuclear ash ions should be carried out in two monochromatic RF fields of different frequencies, provided that the fraction of {xi} multicharged ions is small, {xi} {<=} 0.1, a condition that substantially restricts the productivity of systems for processing spent nuclear fuel. Ways of overcoming this difficulty are discussed.

Timofeev, A. V. [Russian Research Centre Kurchatov Institute, Nuclear Fusion Institute (Russian Federation)

2009-11-15T23:59:59.000Z

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Influence of Nuclear Fuel Cycles on Uncertainty of Long Term Performance of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Influence of Nuclear Fuel Cycles on Uncertainty of Long Term Influence of Nuclear Fuel Cycles on Uncertainty of Long Term Performance of Geologic Disposal Systems Influence of Nuclear Fuel Cycles on Uncertainty of Long Term Performance of Geologic Disposal Systems Development and implementation of future advanced fuel cycles including those that recycle fuel materials, use advanced fuels different from current fuels, or partition and transmute actinide radionuclides, will impact the waste management system. The Used Fuel Disposition Campaign can reasonably conclude that advanced fuel cycles, in combination with partitioning and transmutation, which remove actinides, will not materially alter the performance, the spread in dose results around the mean, the modeling effort to include significant features, events, and processes

282

Influence of Nuclear Fuel Cycles on Uncertainty of Long Term Performance of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Influence of Nuclear Fuel Cycles on Uncertainty of Long Term Influence of Nuclear Fuel Cycles on Uncertainty of Long Term Performance of Geologic Disposal Systems Influence of Nuclear Fuel Cycles on Uncertainty of Long Term Performance of Geologic Disposal Systems Development and implementation of future advanced fuel cycles including those that recycle fuel materials, use advanced fuels different from current fuels, or partition and transmute actinide radionuclides, will impact the waste management system. The Used Fuel Disposition Campaign can reasonably conclude that advanced fuel cycles, in combination with partitioning and transmutation, which remove actinides, will not materially alter the performance, the spread in dose results around the mean, the modeling effort to include significant features, events, and processes

283

Fuel Cell Experience & Opportunities: U.S. Postal Service  

Energy.gov (U.S. Department of Energy (DOE))

Overview of fuel cell experience and opportunities in installation, vechicle components, and vehicle programs

284

Fuel Cycle Technologies Near Term Planning for Storage and Transportation of Used Nuclear Fuel  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of Section 180(c) of the Nuclear of Section 180(c) of the Nuclear Waste Policy Act, as amended National Transportation Stakeholder's Forum Buffalo, NY May 15, 2013 Section 180(c) Mandate "The Secretary shall provide technical assistance and funds to States for training for public safety officials of appropriate units of local government and Indian tribes through whose jurisdiction the Secretary plans to transport spent nuclear fuel or high-level radioactive waste [to an NWPA-authorized facility]. * The training shall cover procedures for safe routine transportation of these materials and procedures for dealing with emergency response situations. * Covers all modes of transport 2 Section 180(c) - Background  DOE nearly implemented Section 180(c) in the mid-

285

Process for recovery of palladium from nuclear fuel reprocessing wastes  

DOE Patents (OSTI)

Palladium is selectively removed from spent nuclear fuel reprocessing waste by adding sugar to a strong nitric acid solution of the waste to partially denitrate the solution and cause formation of an insoluble palladium compound. The process includes the steps of: (a) adjusting the nitric acid content of the starting solution to about 10 M; (b) adding 50% sucrose solution in an amount sufficient to effect the precipitation of the palladium compound; (c) heating the solution at reflux temperature until precipitation is complete; and (d) centrifuging the solution to separate the precipitated palladium compound from the supernatant liquid.

Campbell, D.O.; Buxton, S.R.

1980-06-16T23:59:59.000Z

286

Welding fixture for nuclear fuel pin cladding assemblies  

DOE Patents (OSTI)

A welding fixture for locating a driver sleeve about the open end of a nuclear fuel pin cladding. The welding fixture includes a holder provided with an open cavity having shoulders for properly positioning the driver sleeve, the end cap, and a soft, high temperature resistant plastic protective sleeve that surrounds a portion of the end cap stem. Ejected contaminant particles spewed forth by closure of the cladding by pulsed magnetic welding techniques are captured within a contamination trap formed in the holder for ultimate removal and disposal of contaminating particles along with the holder.

Oakley, David J. (Richland, WA); Feld, Sam H. (West Richland, WA)

1986-01-01T23:59:59.000Z

287

Corrosion of Spent Nuclear Fuel: The Long-Term Assessment  

SciTech Connect

Spent nuclear fuel, essentially U{sub 2}, accounts for over 95% of the total radioactivity of all of the radioactive wastes in the United States that require disposal, disposition or remediation. The UO{sub 2} in SNF is not stable under oxiding conditions and may also be altered under reducing conditions. The alteration of SNF results in the formation of new uranium phases that can cause the release or retardation of actinide and fission product radionuclides. Over the long term, and depending on the extent to which the secondary uranium phases incorporate fission products and actinides, these alteration phases become the near-field source term.

Rodney C. Ewing

2004-10-07T23:59:59.000Z

288

Test protocol for aluminum based spent nuclear fuel  

SciTech Connect

Aluminum based spent nuclear fuel (Al-SNF) will be treated and then stored in a geological repository. A series of corrosion tests, including coupon, galvanic, and electrochemical, were performed to measure the effects of degradation on U-Al alloys, which simulated various Al-SNF forms. The test solutions were variants of a J-13 well water chemistry. As part of the degradation characteristics, the dissolution of uranium, which is the primary radionuclide, was measured. The degradation and dissolution were changed by the type of water chemistry and the temperature. The alloy composition and fabrication were not significant variables.

Mickalonis, J.I.; Wiersma, B.J.

1999-07-01T23:59:59.000Z

289

Strengthening the nuclear-reactor fuel cycle against proliferation  

SciTech Connect

Argonne National Laboratory (ANL) conducts several research programs that serve to reduce the risks of fissile-material diversion from the nuclear-reactor fuel cycle. The objectives are to provide economical and efficient neutron or power generation with the minimum of inherent risks, and to further minimize risks by utilizing sophisticated techniques to detect attempts at material diversion. This paper will discuss the Reduced Enrichment Research and Test Reactor (RERTR) Program, the Isotope Correlation Technique (ICT), and Proliferation-Resistant Closed-Cycle Reactors. The first two are sponsored by the DOE Office of Arms Control and Nonproliferation.

Travelli, A.; Snelgrove, J.; Persiani, P. [Argonne National Lab., IL (United States). Arms Control and Nonproliferation Program

1992-12-31T23:59:59.000Z

290

Closure mechanism and method for spent nuclear fuel canisters  

DOE Patents (OSTI)

A canister is provided for storing, transporting, and/or disposing of spent nuclear fuel. The canister includes a canister shell, a top shield plug disposed within the canister, and a leak-tight closure arrangement. The closure arrangement includes a shear ring which forms a containment boundary of the canister, and which is welded to the canister shell and top shield plug. An outer seal plate, forming an outer seal, is disposed above the shear ring and is welded to the shield plug and the canister.

Doman, Marvin J. (Monroeville, PA)

2004-11-23T23:59:59.000Z

291

Spent nuclear fuel policies in historical perspective: An international comparison  

Science Journals Connector (OSTI)

The purpose of this article is to explain why the world's nuclear power countries differ from each other with respect to their spent nuclear fuel (SNF) policies. The emergence and evolution of three principal SNF approaches are analyzed: direct disposal, reprocessing and SNF export. Five broad explanatory factors are identified and discussed in relation to the observed differences in policy outcomes: military ambitions and non-proliferation, technological culture, political culture and civil society, geological conditions, and energy policy. SNF policy outcomes can generally be seen to result from a complex interaction between these broad factors, but it is also possible to discern a number of important patterns. To the extent that the five factors may undergo far-reaching changes in the future, the historical experience of how they have shaped SNF policies also give a hint of possible future directions in SNF policymaking around the world.

Per Högselius

2009-01-01T23:59:59.000Z

292

Training implementation matrix, Spent Nuclear Fuel Project (SNFP)  

SciTech Connect

This Training Implementation Matrix (TIM) describes how the Spent Nuclear Fuel Project (SNFP) implements the requirements of DOE Order 5480.20A, Personnel Selection, Qualification, and Training Requirements for Reactor and Non-Reactor Nuclear Facilities. The TIM defines the application of the selection, qualification, and training requirements in DOE Order 5480.20A at the SNFP. The TIM also describes the organization, planning, and administration of the SNFP training and qualification program(s) for which DOE Order 5480.20A applies. Also included is suitable justification for exceptions taken to any requirements contained in DOE Order 5480.20A. The goal of the SNFP training and qualification program is to ensure employees are capable of performing their jobs safely and efficiently.

EATON, G.L.

2000-06-08T23:59:59.000Z

293

Analysis of Transuranic Mixed Oxide Fuel in a CANDU Nuclear Reactor.  

E-Print Network (OSTI)

?? The reprocessing of spent fuel is a key component in reducing the end waste from nuclear power plant operations and creating a sustainable closed… (more)

Morreale, Andrew C

2013-01-01T23:59:59.000Z

294

LWR NUCLEAR FUEL BUNDLE DATA FOR USE IN FUEL BUNDLE HANDLING  

Office of Scientific and Technical Information (OSTI)

LWR NUCLEAR FUEL BUNDLE DATA FOR LWR NUCLEAR FUEL BUNDLE DATA FOR USE IN FUEL BUNDLE HANDLING TOPICAL REPORT W. 8. Weihermilfer C. S. Allison Septem bet 1979 Work Performed, Under Contract EY-76-C- M - 1 8 3 0 Form 189 Number 210.1 BAlTELLE PACIFIC NORTHWEST LABORATORY RICHLAND, WA 99352 BASE TECHNOLOGY N O T I C E T h i s report was prepard n an account of work sponrored by the UAed States Govcmmenr. Neither tht Unltcd S t a t e nor !he k p n m c n t of Energy, not any of their ernploylecs, nw any of theb ccmtnctotr, hontncton. or their employper. maka any warranty. expms or Implied, or m u m any legal liability or rcrponrlbllity for the accuracy, c o m p l c r e ~ s or ulefulnm of m y information. -ratus, prodm or p r e di~1Oltd. or represents that Its u w ? would not infringe privateiy o w d rights. The views, opinions and ccnclusionr contained in this report a

295

Fuels  

NLE Websites -- All DOE Office Websites (Extended Search)

Goals > Fuels Goals > Fuels XMAT for nuclear fuels XMAT is ideally suited to explore all of the radiation processes experienced by nuclear fuels.The high energy, heavy ion accleration capability (e.g., 250 MeV U) can produce bulk damage deep in the sample, achieving neutron type depths (~10 microns), beyond the range of surface sputtering effects. The APS X-rays are well matched to the ion beams, and are able to probe individual grains at similar penetrations depths. Damage rates to 25 displacements per atom per hour (DPA/hr), and doses >2500 DPA can be achieved. MORE» Fuels in LWRs are subjected to ~1 DPA per day High burn-up fuel can experience >2000 DPA. Traditional reactor tests by neutron irradiation require 3 years in a reactor and 1 year cool down. Conventional accelerators (>1 MeV/ion) are limited to <200-400 DPAs, and

296

Drop Testing of DOE Spent Nuclear Fuel Canisters  

SciTech Connect

The National Spent Nuclear Fuel Program (NSNFP) at the Idaho National Engineering and Environmental Laboratory INEEL) prepared four representative Department of Energy DOE) spent nuclear fuel (SNF) canisters for the purpose of drop testing. The first two canisters represented a modified 24- inch diameter standardized DOE SNF canister and the second two canisters represented the Hanford Multi-Canister Overpack MCO). The modified canisters and internals were constructed and assembled at the INEEL. The MCO internal weights were fabricated at the INEEL and assembled into two MCOs at Hanford and later shipped to the INEEL for drop test preparation. Drop testing of these four canisters was completed in August 2004 at Sandia National Laboratories. The modified canisters were dropped from 30 feet onto a flat, essentially unyielding surface, with the canisters oriented at 45 degrees and 70 degrees off-vertical at impact. One representative MCO was dropped from 23 feet onto the same flat surface, oriented vertically at impact. The second representative MCO was dropped onto the flat surface from 2 feet oriented at 60 degrees off-vertical. These drop heights and orientations were chosen to meet or exceed the Yucca Mountain repository drop criteria. This paper discusses the comparison of deformations between the actual dropped canisters and those predicted by pre-drop and limited post-drop finite element evaluations performed using ABAQUS/Explicit. Post-drop containment of all four canisters, demonstrated by way of helium leak testing, is also discussed.

S. D. Snow; D. K. Morton; T. E. Rahl; R. K. Blandford; T. J. Hill

2005-07-01T23:59:59.000Z

297

Determination of the optimum fuel burn-up and energy intensities of nuclear fuel by the method of cost calculations  

Science Journals Connector (OSTI)

This report gives the procedure for determining the economical efficiency of the utilization of nuclear fuel in a reactor on the basis of calculated costs. The expression obtained for the fuet constituent of the

Yu. I. Koryakin; V. V. Batov; V. G. Smirnov

1964-08-01T23:59:59.000Z

298

Summary engineering description of underwater fuel storage facility for foreign research reactor spent nuclear fuel  

SciTech Connect

This document is a summary description for an Underwater Fuel Storage Facility (UFSF) for foreign research reactor (FRR) spent nuclear fuel (SNF). A FRR SNF environmental Impact Statement (EIS) is being prepared and will include both wet and dry storage facilities as storage alternatives. For the UFSF presented in this document, a specific site is not chosen. This facility can be sited at any one of the five locations under consideration in the EIS. These locations are the Idaho National Engineering Laboratory, Savannah River Site, Hanford, Oak Ridge National Laboratory, and Nevada Test Site. Generic facility environmental impacts and emissions are provided in this report. A baseline fuel element is defined in Section 2.2, and the results of a fission product analysis are presented. Requirements for a storage facility have been researched and are summarized in Section 3. Section 4 describes three facility options: (1) the Centralized-UFSF, which would store the entire fuel element quantity in a single facility at a single location, (2) the Regionalized Large-UFSF, which would store 75% of the fuel element quantity in some region of the country, and (3) the Regionalized Small-UFSF, which would store 25% of the fuel element quantity, with the possibility of a number of these facilities in various regions throughout the country. The operational philosophy is presented in Section 5, and Section 6 contains a description of the equipment. Section 7 defines the utilities required for the facility. Cost estimates are discussed in Section 8, and detailed cost estimates are included. Impacts to worker safety, public safety, and the environment are discussed in Section 9. Accidental releases are presented in Section 10. Standard Environmental Impact Forms are included in Section 11.

Dahlke, H.J.; Johnson, D.A.; Rawlins, J.K.; Searle, D.K.; Wachs, G.W.

1994-10-01T23:59:59.000Z

299

Advanced LWR Nuclear Fuel Cladding System Development Trade-Off Study  

SciTech Connect

The Advanced Light Water Reactor (LWR) Nuclear Fuel Development Research and Development (R&D) Pathway encompasses strategic research focused on improving reactor core economics and safety margins through the development of an advanced fuel cladding system. To achieve significant operating improvements while remaining within safety boundaries, significant steps beyond incremental improvements in the current generation of nuclear fuel are required. Fundamental improvements are required in the areas of nuclear fuel composition, cladding integrity, and the fuel/cladding interaction to allow power uprates and increased fuel burn-up allowance while potentially improving safety margin through the adoption of an “accident tolerant” fuel system that would offer improved coping time under accident scenarios. With a development time of about 20 – 25 years, advanced fuel designs must be started today and proven in current reactors if future reactor designs are to be able to use them with confidence.

Kristine Barrett; Shannon Bragg-Sitton

2012-09-01T23:59:59.000Z

300

ULTRASONIC ARRAY TECHNIQUE FOR THE INSPECTION OF COPPER LINED CANISTERS FOR NUCLEAR WASTE FUEL  

E-Print Network (OSTI)

ULTRASONIC ARRAY TECHNIQUE FOR THE INSPECTION OF COPPER LINED CANISTERS FOR NUCLEAR WASTE FUEL and Waste Management Co.) for encapsulation of nuclear waste. Due to the radiation emitted by the nuclear, and characterization. The applicability of linear array technique for inspection of copper lined canisters for nuclear

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Wire wrapped fuel pin hexagonal arrays for PWR service  

E-Print Network (OSTI)

This work contributes to the Hydride Fuels Project, a collaborative effort between UC Berkeley and MIT aimed at investigating the potential benefits of hydride fuel use in light water reactors (LWRs). Core design is ...

Diller, Peter Ray

2005-01-01T23:59:59.000Z

302

Fuel Performance Experiments and Modeling: Fission Gas Bubble Nucleation and Growth in Alloy Nuclear Fuels  

SciTech Connect

Advanced fast reactor systems being developed under the DOE's Advanced Fuel Cycle Initiative are designed to destroy TRU isotopes generated in existing and future nuclear energy systems. Over the past 40 years, multiple experiments and demonstrations have been completed using U-Zr, U-Pu-Zr, U-Mo and other metal alloys. As a result, multiple empirical and semi-empirical relationships have been established to develop empirical performance modeling codes. many mechamistic questions about fission as mobility, bubble coalescience, and gas release have been answered through industrial experience, reearch, and empirical understanding. The advent of modern computational materials science, however, opens new doors of development such that physics-based multi-scale models may be developed to enable a new generation of predictive fuel performance codes that are not limited by empiricism.

McDeavitt, Sean; Shao, Lin; Tsvetkov, Pavel; Wirth, Brian; Kennedy, Rory

2014-04-07T23:59:59.000Z

303

DECONTAMINATION OF ZIRCALOY CLADDING HULLS FROM SPENT NUCLEAR FUEL  

SciTech Connect

The feasibility of decontaminating spent fuel cladding hulls using hydrofluoric acid (HF) was investigated as part of the Global Energy Nuclear Partnership (GNEP) Separations Campaign. The concentrations of the fission product and transuranic (TRU) isotopes in the decontaminated hulls were compared to the limits for determining the low level waste (LLW) classification in the United States (US). The {sup 90}Sr and {sup 137}Cs concentrations met the disposal criteria for a Class C LLW; although, in a number of experiments the criteria for disposal as a Class B LLW were met. The TRU concentration in the hulls generally exceeded the Class C LLW limit by at least an order of magnitude. The concentration decreased sharply as the initial 30-40 {micro}m of the cladding hull surface were removed. At depths beyond this point, the TRU activity remained relatively constant, well above the Class C limit. Reprocessing of spent nuclear fuel generates a cladding waste which would likely require disposal as a Greater than Class C LLW in the US. If the cladding hulls could be treated to remove a majority of the actinide and fission product contamination, the hulls could potentially meet acceptance criteria for disposal as a LLW or allow recycle of the Zr metal. Discard of the hulls as a LLW would result in significant cost savings compared to disposal as a Greater than Class C waste which currently has no disposition path. During fuel irradiation and reprocessing, radioactive materials are produced and deposited in the Zircaloy cladding. Due to short depths of penetration, the majority of the fission products and actinide elements are located in the ZrO{sub 2} layer which forms on the surface of the cladding during fuel irradiation. Therefore, if the oxide layer is removed, the majority of the contamination should also be removed. It is very difficult, if not impossible to remove all of the activity from spent fuel cladding since traces of U and Th in the unirradiated Zircaloy adsorb neutrons generating higher actinides in the bulk material. During fuel irradiation, {sup 92}Zr is also converted to radioactive {sup 93}Zr by neutron adsorption. Methods for decontaminating and conditioning irradiated Zircaloy cladding hulls have been investigated in Europe, Japan, and the US during the last 35 years; however, a method to decontaminate the hulls to an activity level which meets US acceptance criteria for disposal as a LLW was not deployed on a commercial scale. The feasibility of decontaminating spent fuel cladding hulls was investigated as part of the GNEP Separations Campaign. Small-scale experiments were used to demonstrate the removal of the ZrO{sub 2} layer from Zircaloy coupons using dilute solutions ({le}1.0 M) of HF. The most effective conditions resulted in dissolution rates which were less than approximately 2 mg/cm{sup 2}-min. With dissolution rates in this range, uniform removal of the oxide layer was obtained and a minimal amount of Zircaloy metal was dissolved. To test the HF decontamination process, experiments were subsequently performed using actual spent fuel cladding hulls. Decontamination experiments were performed to measure the fission product and actinide concentrations as a function of the depth of the surface removed from the cladding hull. The experimental methods used to perform these experiments and a discussion of the results and observations are presented in the following sections.

Rudisill, T.

2010-09-29T23:59:59.000Z

304

EMPLOYEE FUEL ACCESS APPLICATION Use this application to request access for employees to use the campus service stations in conjunction with a fuel  

E-Print Network (OSTI)

EMPLOYEE FUEL ACCESS APPLICATION Use this application to request access for employees to use the campus service stations in conjunction with a fuel access device. In order to obtain fuel from for access. Employee access is not required for the U-M fleet vehicle equipped with an automated fuel device

Kirschner, Denise

305

Origin of Low Thermal Conductivity in Nuclear Fuels Quan Yin and Sergey Y. Savrasov  

E-Print Network (OSTI)

, the thermal conductivity of UO2 is very low, and the search for alternative materials continuesOrigin of Low Thermal Conductivity in Nuclear Fuels Quan Yin and Sergey Y. Savrasov Department in a very low thermal conductivity of modern nuclear fuels. Consider semiconducting UO2 which is a main

Savrasov, Sergej Y.

306

Characterization of a Stochastic Procedure for the Generation and Transport of Fission Fragments within Nuclear Fuels  

E-Print Network (OSTI)

With the ever-increasing demands of the nuclear power community to extend fuel cycles and overall core-lifetimes in a safe and economic manner, it is becoming more necessary to extend the working knowledge of nuclear fuel performance. From...

Hackemack, Michael Wayne

2013-04-15T23:59:59.000Z

307

Demonstration of the use of hydrogen fuel for food service. Final report, October 1992--September 1993  

SciTech Connect

This Phase 1 effort demonstrated the use of hydrogen-gas fuel for use in food service applications. Energy efficiencies of 40--50 percent were achieved with Mainstream Engineering's hydrogen burner, with usable energy supply rates of 15,000 BTU/hr, fulfilling the requirements of the US Army. It was demonstrated that hydrogen-fuel could be used for food service using compressed cylinders of hydrogen or by using metal-hydride derived hydrogen.

Back, D.D.

1999-03-01T23:59:59.000Z

308

A study on bunker fuel management for the shipping liner services  

Science Journals Connector (OSTI)

In this paper, we consider a bunker fuel management strategy study for a single shipping liner service. The bunker fuel management strategy includes three components: bunkering ports selection (where to bunker), bunkering amounts determination (how much to bunker) and ship speeds adjustment (how to adjust the ship speeds along the service route). As these three components are interrelated, it is necessary to optimize them jointly in order to obtain an optimal bunker fuel management strategy for a single shipping liner service. As an appropriate model representing the relationship between bunker fuel consumption rate and ship speed is important in the bunker fuel management strategy, we first study in detail this empirical relationship. We find that the relationship can be different for different sizes of containerships and provide an empirical model to express this relationship for different sizes of containerships based on real data obtained from a shipping company. We further highlight the importance of using the appropriate consumption rate model in the bunker fuel management strategy as using a wrong or aggregated model can result in inferior or suboptimal strategies. We then develop a planning level model to determine the optimal bunker fuel management strategy, i.e. optimal bunkering ports, bunkering amounts and ship speeds, so as to minimize total bunker fuel related cost for a single shipping liner service. Based on the optimization model, we study the effects of port arrival time windows, bunker fuel prices, ship bunker fuel capacity and skipping port options on the bunker fuel management strategy of a single shipping liner service. We finally provide some insights obtained from two case studies.

Zhishuang Yao; Szu Hui Ng; Loo Hay Lee

2012-01-01T23:59:59.000Z

309

Neutronics of accelerator-driven subcritical fission for burning transuranics in used nuclear fuel  

SciTech Connect

We report the development of a conceptual design for accelerator-driven subcritical fission in a molten salt core (ADSMS). ADSMS is capable of destroying all of the transuranics at the same rate and proportion as they are produced in a conventional nuclear power plant. The ADSMS core is fueled solely by transuranics extracted from used nuclear fuel and reduces its radiotoxicity by a factor 10,000. ADSMS offers a way to close the nuclear fuel cycle so that the full energy potential in the fertile fuels uranium and thorium can be recovered.

Sattarov, A.; Assadi, S.; Badgley, K.; Baty, A.; Comeaux, J.; Gerity, J.; Kellams, J.; Mcintyre, P.; Pogue, N.; Sooby, E.; Tsvetkov, P.; Rosaire, G. [Texas A and M University, College Station, TX 77845 (United States); Mann, T. [Argone National Laboratory, Argone, IL (United States)

2013-04-19T23:59:59.000Z

310

Report of the Fuel Cycle Subcommittee of the Nuclear Energy Advisory  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fuel Cycle Subcommittee of the Nuclear Energy Fuel Cycle Subcommittee of the Nuclear Energy Advisory Committee Report of the Fuel Cycle Subcommittee of the Nuclear Energy Advisory Committee The Fuel Cycle Subcommittee (FCSC) of NEAC met in Washington, August 17- 19, 2010. DOE's new science-based approach to all matters related to nuclear energy is being implemented. The general approach was outlined to NEAC in the briefing on the NE Roadmap. There are many new directions being considered, and this meeting of the FCSC was to brief the Subcommittee on new directions in nuclear energy that might go beyond our present 4.5% enriched LWRs. The goal is to develop new concepts that have advantages over present systems in some combination of cost, passive safety, proliferation resistance, sustainability, and used fuel disposition.

311

Report of the Fuel Cycle Subcommittee of the Nuclear Energy Advisory  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of the Fuel Cycle Subcommittee of the Nuclear Energy of the Fuel Cycle Subcommittee of the Nuclear Energy Advisory Committee Report of the Fuel Cycle Subcommittee of the Nuclear Energy Advisory Committee The Fuel Cycle Subcommittee (FCSC) of NEAC met in Washington, August 17- 19, 2010. DOE's new science-based approach to all matters related to nuclear energy is being implemented. The general approach was outlined to NEAC in the briefing on the NE Roadmap. There are many new directions being considered, and this meeting of the FCSC was to brief the Subcommittee on new directions in nuclear energy that might go beyond our present 4.5% enriched LWRs. The goal is to develop new concepts that have advantages over present systems in some combination of cost, passive safety, proliferation resistance, sustainability, and used fuel disposition.

312

Licensing issues associated with the use of mixed-oxide fuel in US commercial nuclear reactors  

SciTech Connect

On January 14, 1997, the Department of Energy, as part of its Record of Decision on the storage and disposition of surplus nuclear weapons materials, committed to pursue the use of excess weapons-usable plutonium in the fabrication of mixed-oxide (MOX) fuel for consumption in existing commercial nuclear power plants. Domestic use of MOX fuel has been deferred since the late 1970s, principally due to nuclear proliferation concerns. This report documents a review of past and present literature (i.e., correspondence, reports, etc.) on the domestic use of MOX fuel and provides discussion on the technical and regulatory issues that must be addressed by DOE (and the utility/consortia selected by DOE to effect the MOX fuel consumption strategy) in obtaining approval from the Nuclear Regulatory Commission to use MOX fuel in one or a group of existing commercial nuclear power plants.

Williams, D.L. Jr.

1997-04-01T23:59:59.000Z

313

EA-1954: Resumption of Transient Testing of Nuclear Fuels and Materials at  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4: Resumption of Transient Testing of Nuclear Fuels and 4: Resumption of Transient Testing of Nuclear Fuels and Materials at the Idaho National Laboratory, Idaho EA-1954: Resumption of Transient Testing of Nuclear Fuels and Materials at the Idaho National Laboratory, Idaho SUMMARY This Environmental Assessment (EA) evaluates U.S. Department of Energy (DOE) activities associated with its proposal to resume testing of nuclear fuels and materials under transient high-power test conditions at the Transient Reactor Test (TREAT) Facility at the Idaho National Laboratory. The State of Idaho and Shoshone-Bannock Tribes are cooperating agencies. PUBLIC COMMENT OPPORTUNITIES DOE invites the public to read and comment on a draft environmental assessment it has prepared for a proposal to resume transient testing of nuclear fuels and materials at either Idaho National Laboratory or Sandia

314

Nuclear nonproliferation: Concerns with US delays in accepting foregin research reactors` spent fuel  

SciTech Connect

One key US nonproliferation goal is to discourage use of highly enriched uranium fuel (HEU), which can be used to make nuclear bombs, in civilian nuclear programs worldwide. DOE`s Off-Site Fuels Policy for taking back spent HEU from foreign research reactors was allowed to expire due to environmental reasons. This report provides information on the effects of delays in renewing the Off-Site Fuels Policy on US nonproliferation goals and programs (specifically the reduced enrichment program), DOE`s efforts to renew the fuels policy, and the price to be charged to the operators of foreign reactors for DOE`s activities in taking back spent fuel.

NONE

1994-03-25T23:59:59.000Z

315

Advanced LWR Nuclear Fuel Cladding System Development Trade-off Study |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LWR Nuclear Fuel Cladding System Development Trade-off LWR Nuclear Fuel Cladding System Development Trade-off Study Advanced LWR Nuclear Fuel Cladding System Development Trade-off Study The LWR Sustainability (LWRS) Program activities must support the timeline dictated by utility life extension decisions to demonstrate a lead test rod in a commercial reactor within 10 years. In order to maintain the demanding development schedule that must accompany this aggressive timeline, the LWRS Program focuses on advanced fuel cladding systems that retain standard UO2 fuel pellets for deployment in currently operating LWR power plants. The LWRS work scope focuses on fuel system components outside of the fuel pellet, allowing for alteration of the existing zirconium-based clad system through coatings, addition of ceramic sleeves, or complete replacement

316

MANAGEMENT OF RESEARCH AND TEST REACTOR ALUMINUM SPENT NUCLEAR FUEL - A TECHNOLOGY ASSESSMENT  

SciTech Connect

The Department of Energy's Environmental Management (DOE-EM) Program is responsible for the receipt and storage of aluminum research reactor spent nuclear fuel or used fuel until ultimate disposition. Aluminum research reactor used fuel is currently being stored or is anticipated to be returned to the U.S. and stored at DOE-EM storage facilities at the Savannah River Site and the Idaho Nuclear Technology and Engineering Center. This paper assesses the technologies and the options for safe transportation/receipt and interim storage of aluminum research reactor spent fuel and reviews the comprehensive strategy for its management. The U.S. Department of Energy uses the Appendix A, Spent Nuclear Fuel Acceptance Criteria, to identify the physical, chemical, and isotopic characteristics of spent nuclear fuel to be returned to the United States under the Foreign Research Reactor Spent Nuclear Fuel Acceptance Program. The fuel is further evaluated for acceptance through assessments of the fuel at the foreign sites that include corrosion damage and handleability. Transport involves use of commercial shipping casks with defined leakage rates that can provide containment of the fuel, some of which are breached. Options for safe storage include wet storage and dry storage. Both options must fully address potential degradation of the aluminum during the storage period. This paper focuses on the various options for safe transport and storage with respect to technology maturity and application.

Vinson, D.

2010-07-11T23:59:59.000Z

317

Behavior of Spent Nuclear Fuel in Water Pool Storage  

Office of Scientific and Technical Information (OSTI)

Behavior of Spent Nuclear Behavior of Spent Nuclear Fuel in Water Pool Storage A. 0; Johnson, jr. , I ..: . Prepared Cor the Energy Research and Development Administration under Contract EY-76-C-06-1830 ---- Pat t i ~ < N ~ ~ r ~ t b w t ~ - ! I , ~ I ~ ~ ~ I . I I ~ ) ~ I I ~ ~ N O T I C E T€& - was prepad pnpn4. m w n t of w k spon-d by the Unitd S t . & ) C a u n m ~ (*WU ij*. M t e d $tam w the Wqy R e s e w & a d Ohrsropmcnt ~dmhirmlion, nor m y d thair ewhew,,nq Pny @fw a n t r ~ ~ t 0 ~ 1 , s ~ k m r i t r i l t t q r , ~ , m r tWf ernpfQw, r(tLltm any wartany, s x p r e s or kWld,= w w aAql -9 . o r r w p a m l ~ ~ t y for e~ o r uodruincvr of any infomutim, 9 F p d + d - , or repratants that -would nat 1 d - e privately owned rfghas. ,i PAQFIC NORTHWEST UBORATORY operated b ;"' SArnLLE ' fw the E M R m RESEARCH AND DEVELOPMENT ADMINISTRAT1QN Wk.Cwfraa rv-76c-ts-is38

318

Multi-Detector Analysis System for Spent Nuclear Fuel Characterization  

SciTech Connect

The Spent Nuclear Fuel (SNF) Non-Destructive Analysis (NDA) program at INEEL is developing a system to characterize SNF for fissile mass, radiation source term, and fissile isotopic content. The system is based on the integration of the Fission Assay Tomography System (FATS) and the Gamma-Neutron Analysis Technique (GNAT) developed under programs supported by the DOE Office of Non-proliferation and National Security. Both FATS and GNAT were developed as separate systems to provide information on the location of special nuclear material in weapons configuration (FATS role), and to measure isotopic ratios of fissile material to determine if the material was from a weapon (GNAT role). FATS is capable of not only determining the presence and location of fissile material but also the quantity of fissile material present to within 50%. GNAT determines the ratios of the fissile and fissionable material by coincidence methods that allow the two prompt (immediately) produced fission fragments to be identified. Therefore, from the combination of FATS and GNAT, MDAS is able to measure the fissile material, radiation source term, and fissile isotopics content.

Reber, Edward Lawrence; Aryaeinejad, Rahmat; Cole, Jerald Donald; Drigert, Mark William; Jewell, James Keith; Egger, Ann Elizabeth; Cordes, Gail Adele

1999-09-01T23:59:59.000Z

319

Summary of "Materials Modeling and Simulations for Nuclear Fuels"  

NLE Websites -- All DOE Office Websites (Extended Search)

Summary of "Materials Modeling and Simulations for Nuclear Fuels" Summary of "Materials Modeling and Simulations for Nuclear Fuels" (MMSNF 2013) workshop Director's Welcome Organization Achievements Highlights Fact Sheets, Brochures & Other Documents Multimedia Library About Nuclear Energy Nuclear Reactors Designed by Argonne Argonne's Nuclear Science and Technology Legacy Opportunities within NE Division Visit Argonne Work with Argonne Contact us For Employees Site Map Help Join us on Facebook Follow us on Twitter NE on Flickr Celebrating the 70th Anniversary of Chicago Pile 1 (CP-1) Argonne OutLoud on Nuclear Energy Argonne Energy Showcase 2012 Highlights Bookmark and Share "Materials Modeling and Simulations for Nuclear Fuels" (MMSNF 2013) workshop Workshop Summary Presentation during MMSNF Workshop in Chicago

320

Author's personal copy Cost analysis of the US spent nuclear fuel reprocessing facility  

E-Print Network (OSTI)

of this, a 1987 amendment to the US Nuclear Waste Policy Act mandates the Secretary of Energy to report on a site for a second repository by 2010 (Nuclear Waste Policy Amendments Act, 1987). HoweverAuthor's personal copy Cost analysis of the US spent nuclear fuel reprocessing facility E

Deinert, Mark

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Identification and Analysis of Critical Gaps in Nuclear Fuel Cycle Codes Required by the SINEMA Program  

SciTech Connect

The current state of the art in nuclear fuel cycle (NFC) modeling is an eclectic mixture of codes with various levels of applicability, flexibility, and availability. In support of the advanced fuel cycle systems analyses, especially those by the Advanced Fuel Cycle Initiative (AFCI), Unviery of Cincinnati in collaboration with Idaho State University carried out a detailed review of the existing codes describing various aspects of the nuclear fuel cycle and identified the research and development needs required for a comprehensive model of the global nuclear energy infrastructure and the associated nuclear fuel cycles. Relevant information obtained on the NFC codes was compiled into a relational database that allows easy access to various codes' properties. Additionally, the research analyzed the gaps in the NFC computer codes with respect to their potential integration into programs that perform comprehensive NFC analysis.

Adrian Miron; Joshua Valentine; John Christenson; Majd Hawwari; Santosh Bhatt; Mary Lou Dunzik-Gougar: Michael Lineberry

2009-10-01T23:59:59.000Z

322

The Role of Friction Stir Welding in Nuclear Fuel Plate Fabrication  

SciTech Connect

The friction bonding process combines desirable attributes of both friction stir welding and friction stir processing. The development of the process is spurred on by the need to fabricate thin, high density, reduced enrichment fuel plates for nuclear research reactors. The work seeks to convert research and test reactors currently operating on highly enriched uranium fuel to operate on low enriched uranium fuel without significant loss in reactor performance, safety characteristics, or significant increase in cost. In doing so, the threat of global nuclear material proliferation will be reduced. Feasibility studies performed on the process show that this is a viable option for mass production of plate-type nuclear fuel. Adapting the friction stir weld process for nuclear fuel fabrication has resulted in the development of several unique ideas and observations. Preliminary results of this adaptation and process model development are discussed.

D Burkes; P Medvedev; M Chapple; A Amritkar; P Wells; I Charit

2009-02-01T23:59:59.000Z

323

Fresh and Spent Nuclear Fuel Repatriation from the IRT-2000 Research Reactor Facility, Sofia, Bulgaria  

SciTech Connect

The IRT 2000 research reactor, operated by the Bulgarian Institute for Nuclear Research and Nuclear Energy (INRNE), safely shipped all of their Russian-origin nuclear fuel from the Republic of Bulgaria to the Russian Federation beginning in 2003 and completing in 2008. These fresh and spent fuel shipments removed all highly enriched uranium (HEU) from Bulgaria. The fresh fuel was shipped by air in December 2003 using trucks and a commercial cargo aircraft. One combined spent fuel shipment of HEU and low enriched uranium (LEU) was completed in July 2008 using high capacity VPVR/M casks transported by truck, barge, and rail. The HEU shipments were assisted by the Russian Research Reactor Fuel Return Program (RRRFR) and the LEU spent fuel shipment was funded by Bulgaria. This report describes the work, approvals, organizations, equipment, and agreements required to complete these shipments and concludes with several major lessons learned.

K. J. Allen; T. G. Apostolov; I. S. Dimitrov

2009-03-01T23:59:59.000Z

324

Direct Investigations of the Immobilization of Radionuclides in the Alteration Products of Spent Nuclear Fuel  

SciTech Connect

Safe disposal of the nation's nuclear waste in a geological repository involves unique scientific and engineering challenges owing to the very long-lived radioactivity of the waste. The repository must retain a variety of radionuclides that have vastly different chemical characters for several thousand years. Most of the radioactivity that will be housed in the proposed repository at Yucca Mountain will be associated with spent nuclear fuel, much of which is derived from commercial reactors. DOE is custodian of approximately 8000 tons of spent nuclear fuel that is also intended for eventual disposal in a geological repository. Unlike the spent fuel from commercial reactors, the DOE fuel is diverse in composition with more than 250 varieties. Safe disposal of spent fuel requires a detailed knowledge of its long-term behavior under repository conditions, as well as the fate of radionuclides released from the spent fuel as waste containers are breached.

Peter C. Burns; Robert J. Finch; David J. Wronkiewicz

2004-12-27T23:59:59.000Z

325

Nuclear Fuel Cycle Options Evaluation to Inform R&D Planning  

SciTech Connect

An Evaluation and Screening (E&S) of nuclear fuel cycle options has been conducted in fulfilment of a Charter specified for the study by the U.S. Department of Energy (DOE) Office of Nuclear Energy. The E&S study used an objective and independently reviewed evaluation process to provide information about the potential benefits and challenges that could strengthen the basis and provide guidance for the research and development(R&D) activities undertaken by the DOE Fuel Cycle Technologies Program Office. Using the nine evaluation criteria specified in the Charter and associated evaluation metrics and processes developed during the E&S study, a screening was conducted of 40 nuclear fuel cycle evaluation groups to provide answers to the questions: (1) Which nuclear fuel cycle system options have the potential for substantial beneficial improvements in nuclear fuel cycle performance, and what aspects of the options make these improvements possible? (2)Which nuclear material management approaches can favorably impact the performance of fuel cycle options? (3)Where would R&D investment be needed to support the set of promising fuel cycle system options and nuclear material management approaches identified above, and what are the technical objectives of associated technologies?

R. Wigeland; T. Taiwo; M. Todosow; H. Ludewig; W. Halsey; J. Gehin; R. Jubin; J. Buelt; S. Stockinger; K. Jenni; B. Oakley

2014-04-01T23:59:59.000Z

326

VWA-0033- In the Matter of Gretencord v. West Valley Nuclear Services Co., Inc.  

Energy.gov (U.S. Department of Energy (DOE))

This decision considers a Complaint filed by John L. Gretencord (Gretencord) against West Valley Nuclear Services, Inc. (West Valley) under the Department of Energy's (DOE) Contractor Employee...

327

Spent nuclear fuel characterization for a bounding reference assembly for the receiving basin for off-site fuel  

SciTech Connect

The Basis for Interim Operation (BIO) for the Receiving Basin for Off-Site Fuel (RBOF) facility at the Department of Energy (DOE) Savannah River Site (SRS) nuclear materials production complex, developed in accordance with draft DOE-STD-0019-93, required a hazard categorization for the safety analysis section as outlined in DOE-STD-1027-92. The RBOF facility was thus established as a Category-2 facility (having potential for significant on-site consequences from a radiological release) as defined in DOE 5480.23. Given the wide diversity of spent nuclear fuel stored in the RBOF facility, which made a detailed assessment of the total nuclear inventory virtually impossible, the categorization required a conservative calculation based on the concept of a hypothetical, bounding reference fuel assembly integrated over the total capacity of the facility. This scheme not only was simple but also precluded a potential delay in the completion of the BIO.

Kahook, S.D.; Garrett, R.L.; Canas, L.R.; Beckum, M.J. [Westinghouse Savannah River, Aiken, SC (United States)

1995-07-01T23:59:59.000Z

328

Record of Decision for the Final EIS on Proposed Nuclear Weapons Nonproliferation Policy Concerning Foreign Research Reactor Spent Nuclear Fuel  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5091 5091 Friday May 17, 1996 Part IV Department of Energy Record of Decision for the Final Environmental Impact Statement on a Proposed Nuclear Weapons Nonproliferation Policy Concerning Foreign Research Reactor Spent Nuclear Fuel; Notice 25092 Federal Register / Vol. 61, No. 97 / Friday, May 17, 1996 / Notices DEPARTMENT OF ENERGY Record of Decision for the Final Environmental Impact Statement on a Proposed Nuclear Weapons Nonproliferation Policy Concerning Foreign Research Reactor Spent Nuclear Fuel AGENCY: Department of Energy. ACTION: Record of decision. SUMMARY: DOE, in consultation with the Department of State, has decided to implement a new foreign research reactor spent fuel acceptance policy as specified in the Preferred Alternative contained in the Final Environmental Impact Statement on a Proposed

329

Zirconium-based alloys, nuclear fuel rods and nuclear reactors including such alloys, and related methods  

DOE Patents (OSTI)

Zirconium-based metal alloy compositions comprise zirconium, a first additive in which the permeability of hydrogen decreases with increasing temperatures at least over a temperature range extending from 350.degree. C. to 750.degree. C., and a second additive having a solubility in zirconium over the temperature range extending from 350.degree. C. to 750.degree. C. At least one of a solubility of the first additive in the second additive over the temperature range extending from 350.degree. C. to 750.degree. C. and a solubility of the second additive in the first additive over the temperature range extending from 350.degree. C. to 750.degree. C. is higher than the solubility of the second additive in zirconium over the temperature range extending from 350.degree. C. to 750.degree. C. Nuclear fuel rods include a cladding material comprising such metal alloy compositions, and nuclear reactors include such fuel rods. Methods are used to fabricate such zirconium-based metal alloy compositions.

Mariani, Robert Dominick

2014-09-09T23:59:59.000Z

330

Developing Effective Continuous On-Line Monitoring Technologies to Manage Service Degradation of Nuclear Power Plants  

SciTech Connect

Recently, there has been increased interest in using prognostics (i.e, remaining useful life (RUL) prediction) for managing and mitigating aging effects in service-degraded passive nuclear power reactor components. A vital part of this philosophy is the development of tools for detecting and monitoring service-induced degradation. Experience with in-service degradation has shown that rapidly-growing cracks, including several varieties of stress corrosion cracks (SCCs), can grow through a pipe in less than one fuel outage cycle after they initiate. Periodic inspection has limited effectiveness at detecting and managing such degradation requiring a more versatile monitoring philosophy. Acoustic emission testing (AET) and guided wave ultrasonic testing (GUT) are related technologies with potential for on-line monitoring applications. However, harsh operating conditions within NPPs inhibit the widespread implementation of both technologies. For AET, another hurdle is the attenuation of passive degradation signals as they travel though large components, relegating AET to targeted applications. GUT is further hindered by the complexity of GUT signatures limiting its application to the inspection of simple components. The development of sensors that are robust and inexpensive is key to expanding the use of AET and GUT for degradation monitoring in NPPs and improving overall effectiveness. Meanwhile, the effectiveness of AET and GUT in NPPs can be enhanced through thoughtful application of tandem AET-GUT techniques.

Meyer, Ryan M.; Ramuhalli, Pradeep; Bond, Leonard J.; Cumblidge, Stephen E.

2011-09-30T23:59:59.000Z

331

Deployment evaluation methodology for the electrometallurgical treatment of DOE-EM spent nuclear fuel  

SciTech Connect

Part of the Department of Energy (DOE) spent nuclear fuel (SNF) inventory may require some type of treatment to meet acceptance criteria at various disposition sites. The current focus for much of this spent nuclear fuel is the electrometallurgical treatment process under development at Argonne National Laboratory. Potential flowsheets for this treatment process are presented. Deployment of the process for the treatment of the spent nuclear fuel requires evaluation to determine the spent nuclear fuel program need for treatment and compatibility of the spent nuclear fuel with the process. The evaluation of need includes considerations of cost, technical feasibility, process material disposition, and schedule to treat a proposed fuel. A siting evaluation methodology has been developed to account for these variables. A work breakdown structure is proposed to gather life-cycle cost information to allow evaluation of alternative siting strategies on a similar basis. The evaluation methodology, while created specifically for the electrometallurgical evaluation, has been written such that it could be applied to any potential treatment process that is a disposition option for spent nuclear fuel. Future work to complete the evaluation of the process for electrometallurgical treatment is discussed.

Dahl, C.A.; Adams, J.P.; Ramer, R.J.

1998-07-01T23:59:59.000Z

332

SOURCE OF BURNUP VALUES FOR COMMERCIAL SPENT NUCLEAR FUEL ASSEMBLIES  

SciTech Connect

Waste packages are loaded with commercial spent nuclear fuel (SNF) that satisfies the minimum burnup requirements of a criticality loading curve. The burnup value assigned by the originating nuclear utility to each SNF assembly (assigned burnup) is used to load waste packages in compliance with a criticality loading curve. The burnup provided by a nuclear utility has uncertainties, so conservative calculation methods are used to characterize those uncertainties for incorporation into the criticality loading curves. Procedural safety controls ensure that the correct assembly is loaded into each waste package to prevent a misload that could create a condition affecting the safety margins. Probabilistic analyses show that procedural safety controls can minimize the chance of a misload but can not completely eliminate the possibility. Physical measurements of burnup with instrumentation in the surface facility are not necessary due to the conservative calculation methods used to produce the criticality loading curves. The reactor records assigned burnup of a commercial SNF assembly contains about two percent uncertainty, which is increased to five-percent to ensure conservatism. This five-percent uncertainty is accommodated by adjusting the criticality loading curve. Also, the record keeping methods of nuclear utilities are not uniform and the level of detail required by the NRC has varied over the last several decades. Thus, some SNF assemblies may have assigned burnups that are averages for a batch of assemblies with similar characteristics. Utilities typically have access to more detailed core-follow records that allow the batch average burnup to be changed to an assembly specific burnup. Alternatively, an additional safety margin is incorporated into the criticality loading curve to accommodate SNF assemblies with batch average burnups or greater uncertainties due to the methodology used by the nuclear utility. The utility records provide the assembly identifier, initial {sup 235}U enrichment, and time of discharge from the reactor as well as the assigned burnup, but the distribution. of burnup axially along the assembly length is not provided. The axial burnup profile is maintained within acceptable bounds by the operating conditions of the nuclear reactor and is calculated during preparations to reload a reactor, but the actual burnup profile is not measured. The axial burnup profile is important to the determination of the reactivity of a waste package, so a conservative evaluation of the calculated axial profiles for a large database of SNF has been performed. The product of the axial profile evaluation is a profile that is conservative. Thus, there is no need for physical measurement of the axial profile. The assembly identifier is legible on each SNF assembly and the utility records provide the associated characteristics of the assembly. The conservative methodologies used to determine the criticality loading curve for a waste package provide sufficient margin so that criticality safety is assured for preclosure operations even in the event of a misload. Consideration of misload effects for postclosure time periods is provided by the criticality Features, Events, and Processes (FEPs) analysis. The conservative approaches used to develop and apply the criticality loading curve are thus sufficiently robust that the utility assigned burnup is an adequate source of burnup values, and additional means of verification of assigned burnup through physical measurements are not needed.

BSC

2004-12-01T23:59:59.000Z

333

Preliminary Evaluation of Removing Used Nuclear Fuel From Nine Shutdown Sites  

SciTech Connect

The Blue Ribbon Commission on America’s Nuclear Future identified removal of stranded used nuclear fuel at shutdown sites as a priority so that these sites may be completely decommissioned and put to other beneficial uses. In this report, a preliminary evaluation of removing used nuclear fuel from nine shutdown sites was conducted. The shutdown sites included Maine Yankee, Yankee Rowe, Connecticut Yankee, Humboldt Bay, Big Rock Point, Rancho Seco, Trojan, La Crosse, and Zion. At these sites a total of 7649 used nuclear fuel assemblies and a total of 2813.2 metric tons heavy metal (MTHM) of used nuclear fuel are contained in 248 storage canisters. In addition, 11 canisters containing greater-than-Class C (GTCC) low-level radioactive waste are stored at these sites. The evaluation was divided in four components: • characterization of the used nuclear fuel and GTCC low-level radioactive waste inventory at the shutdown sites • an evaluation of the onsite transportation conditions at the shutdown sites • an evaluation of the near-site transportation infrastructure and experience relevant to the shipping of transportation casks containing used nuclear fuel from the shutdown sites • an evaluation of the actions necessary to prepare for and remove used nuclear fuel and GTCC low-level radioactive waste from the shutdown sites. Using these evaluations the authors developed time sequences of activities and time durations for removing the used nuclear fuel and GTCC low-level radioactive waste from a single shutdown site, from three shutdown sites located close to each other, and from all nine shutdown sites.

Maheras, Steven J. [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Best, Ralph [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Ross, Steven B. [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Buxton, Kenneth A. [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); England, Jeffery L. [Savannah River National Laboratory, Aiken, SC (United States); McConnell, Paul [Sandia National Laboratories, Albuquerque, NM (United States)

2013-04-30T23:59:59.000Z

334

Refinishing contamination floors in Spent Nuclear Fuels storage basins  

SciTech Connect

The floors of the K Basins at the Hanford Site are refinished to make decontamination easier if spills occur as the spent nuclear fuel (SNF) is being unloaded from the basins for shipment to dry storage. Without removing the contaminated existing coating, the basin floors are to be coated with an epoxy coating material selected on the basis of the results of field tests of several paint products. The floor refinishing activities must be reviewed by a management review board to ensure that work can be performed in a controlled manner. Major documents prepared for management board review include a report on maintaining radiation exposure as low as reasonably achievable, a waste management plan, and reports on hazard classification and unreviewed safety questions. To protect personnel working in the radiation zone, Operational Health Physics prescribed the required minimum protective methods and devices in the radiological work permit. Also, industrial hygiene safety must be analyzed to establish respirator requirements for persons working in the basins. The procedure and requirements for the refinishing work are detailed in a work package approved by all safety engineers. After the refinishing work is completed, waste materials generated from the refinishing work must be disposed of according to the waste management plan.

Huang, F.F.; Moore, F.W.

1997-07-11T23:59:59.000Z

335

Status of radioiodine control for nuclear fuel reprocessing plants  

SciTech Connect

This report summarizes the status of radioiodine control in a nuclear fuel reprocessing plant with respect to capture, fixation, and disposal. Where possible, we refer the reader to a number of survey documents which have been published in the last four years. We provide updates where necessary. Also discussed are factors which must be considered in developing criteria for iodine control. For capture from gas streams, silver mordenite and a silver nitrate impregnated silica (AC-6120) are considered state-of-the-art and are recommended. Three aqueous scrubbing processes have been demonstrated: Caustic scrubbing is simple but probably will not give an adequate iodine retention by itself. Mercurex (mercuric nitrate-nitric acid scrubbing) has a number of disadvantages including the use of toxic mercury. Iodox (hyperazeotropic nitric acid scrubbing) is effective but employs a very corrosive and hazardous material. Other technologies have been tested but require extensive development. The waste forms recommended for long-term storage or disposal are silver iodide, the iodates of barium, strontium, or calcium, and silver loaded sorbents, all fixed in cement. Copper iodide in bitumen (asphalt) is a possibility but requires testing. The selection of a specific form will be influenced by the capture process used.

Burger, L.L.; Scheele, R.D.

1983-07-01T23:59:59.000Z

336

Reactor Physics and Criticality Benchmark Evaluations for Advanced Nuclear Fuel - Final Technical Report  

SciTech Connect

The nuclear industry interest in advanced fuel and reactor design often drives towards fuel with uranium enrichments greater than 5 wt% 235U. Unfortunately, little data exists, in the form of reactor physics and criticality benchmarks, for uranium enrichments ranging between 5 and 10 wt% 235U. The primary purpose of this project is to provide benchmarks for fuel similar to what may be required for advanced light water reactors (LWRs). These experiments will ultimately provide additional information for application to the criticality-safety bases for commercial fuel facilities handling greater than 5 wt% 235U fuel.

William Anderson; James Tulenko; Bradley Rearden; Gary Harms

2008-09-11T23:59:59.000Z

337

Summary of Preliminary Criticality Analysis for Peach Bottom Fuel in the DOE Standardized Spent Nuclear Fuel Canister  

SciTech Connect

The Department of Energy's (DOE's) National Spent Nuclear Fuel Program is developing a standardized set of canisters for DOE spent nuclear fuel (SNF). These canisters will be used for DOE SNF handling, interim storage, transportation, and disposal in the national repository. Several fuels are being examined in conjunction with the DOE SNF canisters. This report summarizes the preliminary criticality safety analysis that addresses general fissile loading limits for Peach Bottom graphite fuel in the DOE SNF canister. The canister is considered both alone and inside the 5-HLW/DOE Long Spent Fuel Co-disposal Waste Package, and in intact and degraded conditions. Results are appropriate for a single DOE SNF canister. Specific facilities, equipment, canister internal structures, and scenarios for handling, storage, and transportation have not yet been defined and are not evaluated in this analysis. The analysis assumes that the DOE SNF canister is designed so that it maintains reasonable geometric integrity. Parameters important to the results are the canister outer diameter, inner diameter, and wall thickness. These parameters are assumed to have nominal dimensions of 45.7-cm (18.0-in.), 43.815-cm (17.25-in), and 0.953-cm (0.375-in.), respectively. Based on the analysis results, the recommended fissile loading for the DOE SNF canister is 13 Peach Bottom fuel elements if no internal steel is present, and 15 Peach Bottom fuel elements if credit is taken for internal steel.

Henrikson, D.J.

1999-09-01T23:59:59.000Z

338

Idaho Site Completes Demolition of Cold War-era Nuclear Fuel Reprocessing  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Completes Demolition of Cold War-era Nuclear Fuel Completes Demolition of Cold War-era Nuclear Fuel Reprocessing Facility Idaho Site Completes Demolition of Cold War-era Nuclear Fuel Reprocessing Facility December 22, 2011 - 11:12am Addthis Media Contact Erik Simpson (208) 360-0426 A gravel mound, larger than half a city block and several feet thick, is the only visible feature that remains at the site of a Cold War-era spent nuclear fuel reprocessing facility at the U.S. Department of Energy's Idaho site. About $44 million in American Recovery and Reinvestment Act funds helped Idaho Cleanup Project crews accelerate the demolition of the facility that during its 40 years of operation recovered more than $1 billion worth of uranium. "The ability to retain our highly skilled workforce was a huge contributor to the success of this project," said Idaho Cleanup Project

339

Report to Congress on Plan for Interim Storage of Spent Nuclear Fuel from Decommissioned Reactors  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6 6 Report to Congress on the Demonstration of the Interim Storage of Spent Nuclear Fuel from Decommissioned Nuclear Power Reactor Sites December 2008 U.S. Department of Energy Office of Civilian Radioactive Waste Management Washington, D.C. Report to Congress on the Demonstration of the Interim Storage of Spent Nuclear Fuel The picture on the cover is the Connecticut Yankee Independent Spent Fuel Storage Installation site in Haddam, Connecticut, with 43 dry storage NRC-licensed dual-purpose (storage and transport) casks. ii Report to Congress on the Demonstration of the Interim Storage of Spent Nuclear Fuel EXECUTIVE SUMMARY The House Appropriations Committee Print that accompanied the Consolidated Appropriations Act, 2008, requests that the U.S. Department of Energy (the Department):

340

Molten salt considerations for accelerator-driven subcritical fission to close the nuclear fuel cycle  

SciTech Connect

The host salt selection, molecular modeling, physical chemistry, and processing chemistry are presented here for an accelerator-driven subcritical fission in a molten salt core (ADSMS). The core is fueled solely with the transuranics (TRU) and long-lived fission products (LFP) from used nuclear fuel. The neutronics and salt composition are optimized to destroy the transuranics by fission and the long-lived fission products by transmutation. The cores are driven by proton beams from a strong-focusing cyclotron stack. One such ADSMS system can destroy the transuranics in the used nuclear fuel produced by a 1GWe conventional reactor. It uniquely provides a method to close the nuclear fuel cycle for green nuclear energy.

Sooby, Elizabeth; Baty, Austin; Gerity, James; McIntyre, Peter; Melconian, Karie; Pogue, Nathaniel; Sattarov, Akhdiyor [Department of Physics and Astronomy, Texas A and M University, 4242 TAMU, College Station TX 77843 (United States); Adams, Marvin; Tsevkov, Pavel [Nuclear Engineering, Texas A and M University, Spence St., College Station TX 77843 (United States); Phongikaroon, Supathorn [Center for Advanced Energy Studies, University of Idaho, 995 University Blvd, Idaho Falls, ID 83401 (United States); Simpson, Michael; Tripathy, Prabhat [Materials Fuels Complex, Idaho National Laboratory, Idaho Falls, ID 83415 (United States)

2013-04-19T23:59:59.000Z

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Stainless steel-zirconium waste forms from the treatment of spent nuclear fuel  

Science Journals Connector (OSTI)

Stainless steel-zirconium waste-form alloys have been developed for the disposal of metallic wastes recovered from spent nuclear fuel using the electrometallurgical process developed by Argonne National Laborator...

S. M. McDeavitt; D. P. Abraham; J. Y. Park; D. D. Keiser

1997-07-01T23:59:59.000Z

342

Preoperational Environmental Survey for the Spent Nuclear Fuel (SNF) Project Facilities  

SciTech Connect

This document represents the report for environmental sampling of soil, vegetation, litter, cryptograms, and small mammals at the Spent Nuclear Fuel Project facilities located in 100 K and 200 East Areas in support of the preoperational environmental survey.

MITCHELL, R.M.

2000-09-28T23:59:59.000Z

343

EA-1117: Management of Spent Nuclear Fuel on the Oak Ridge Reservation, Oak Ridge, Tennessee  

Energy.gov (U.S. Department of Energy (DOE))

This EA evaluates the environmental impacts of the proposal for the management of spent nuclear fuel on the U.S. Department of Energy's Oak Ridge Reservation to implement the preferred alternative...

344

Advanced dry head-end reprocessing of light water reactor spent nuclear fuel  

SciTech Connect

A method for reprocessing spent nuclear fuel from a light water reactor includes the step of reacting spent nuclear fuel in a voloxidation vessel with an oxidizing gas having nitrogen dioxide and oxygen for a period sufficient to generate a solid oxidation product of the spent nuclear fuel. The reacting step includes the step of reacting, in a first zone of the voloxidation vessel, spent nuclear fuel with the oxidizing gas at a temperature ranging from 200-450.degree. C. to form an oxidized reaction product, and regenerating nitrogen dioxide, in a second zone of the voloxidation vessel, by reacting oxidizing gas comprising nitrogen monoxide and oxygen at a temperature ranging from 0-80.degree. C. The first zone and the second zone can be separate. A voloxidation system is also disclosed.

Collins, Emory D.; Delcul, Guillermo D.; Hunt, Rodney D.; Johnson, Jared A.; Spencer, Barry B.

2014-06-10T23:59:59.000Z

345

Advanced dry head-end reprocessing of light water reactor spent nuclear fuel  

DOE Patents (OSTI)

A method for reprocessing spent nuclear fuel from a light water reactor includes the step of reacting spent nuclear fuel in a voloxidation vessel with an oxidizing gas having nitrogen dioxide and oxygen for a period sufficient to generate a solid oxidation product of the spent nuclear fuel. The reacting step includes the step of reacting, in a first zone of the voloxidation vessel, spent nuclear fuel with the oxidizing gas at a temperature ranging from 200-450.degree. C. to form an oxidized reaction product, and regenerating nitrogen dioxide, in a second zone of the voloxidation vessel, by reacting oxidizing gas comprising nitrogen monoxide and oxygen at a temperature ranging from 0-80.degree. C. The first zone and the second zone can be separate. A voloxidation system is also disclosed.

Collins, Emory D; Delcul, Guillermo D; Hunt, Rodney D; Johnson, Jared A; Spencer, Barry B

2013-11-05T23:59:59.000Z

346

Spent nuclear fuel and residential property values: the influence of proximity, visual cues and public information  

Science Journals Connector (OSTI)

...This article examines whether public knowledge of spent fuel storage at nuclear power plants, and any ... that may have occurred, affect the sale price of single-family residential properties. We present ... m...

David E. Clark; Tim Allison

1999-10-01T23:59:59.000Z

347

RADIATION DOSE ASPECTS IN THE HANDLING OF EMERGING NUCLEAR FUELS  

Science Journals Connector (OSTI)

......transmutation in LMFBR, and uranium (U) matrix fuels...161. 15 NUREG. Standard review plan for the review of an application...16 IAEA. Safety of uranium fuel fabrication facilities...2010) IAEA Safety Standards Series No. SSG-6......

G. Nicolaou

2014-02-01T23:59:59.000Z

348

Nondestructive Spent Fuel Assay Using Nuclear Resonance Fluorescence  

E-Print Network (OSTI)

Techniques for Nuclear Safeguards," LA-UR 09-01188, ANSessential for many nuclear safeguards applications, such asof the Next Generation Safeguards Initiative, NA-241 has

Quiter, Brian

2010-01-01T23:59:59.000Z

349

Mass-spectrometric determination of americium and curium in spent nuclear fuel  

SciTech Connect

It was shown that it is possible to carry out isotopic analysis of americium and curium isolated in one fraction from a sample of nuclear fuel without chemical separation of the elements. This became possible as a result of the use in the mass-spectrometric measurements of a highly efficient ion source with surface ionization in a partially closed cavity. With this ion source, the content of americium and curium in nuclear fuel was determined by isotope dilution.

Kalygin, V.V.; Gabeskiriya, V.Ya.

1987-01-01T23:59:59.000Z

350

Literature on fabrication of tungsten for application in pyrochemical processing of spent nuclear fuels  

SciTech Connect

The pyrochemical processing of nuclear fuels requires crucibles, stirrers, and transfer tubing that will withstand the temperature and the chemical attack from molten salts and metals used in the process. This report summarizes the literature that pertains to fabrication (joining, chemical vapor deposition, plasma spraying, forming, and spinning) is the main theme. This report also summarizes a sampling of literature on molbdenum and the work previously performed at Argonne National Laboratory on other container materials used for pyrochemical processing of spent nuclear fuels.

Edstrom, C.M.; Phillips, A.G.; Johnson, L.D.; Corle, R.R.

1980-10-11T23:59:59.000Z

351

Spent Nuclear Fuel Self-Induced XRF to Predict Pu to U Content  

E-Print Network (OSTI)

area of interest, would improve input accountability and shipper/receiver differences. XRF measurements were made on individual PWR fuel rods with varying fuel ages and final burn-ups at Oak Ridge National Laboratory (ORNL) in July 2008 and January... Committee NRF Nuclear Resonance Fluorescence viii ORNL Oak Ridge National Laboratory Pu Plutonium PUREX Plutonium and Uranium Recovery by Extraction PWR Pressurized Water Reactor RPP Reprocessing Plant SNM Special Nuclear Material...

Stafford, Alissa Sarah

2010-10-12T23:59:59.000Z

352

Nuclear reactor fuel structure containing uranium alloy wires embedded in a metallic matrix plate  

SciTech Connect

A nuclear fuel-containing plate structure for a nuclear reactor is described; such structure comprising a pair of malleable metallic non-fissionable matrix plates having confronting surfaces which are pressure bonded together and fully united to form a bonded surface, and elongated malleable wire-like fissionable fuel members separately confined and fully enclosed between the matrix plates along the interface to afford a high fuel density as well as structural integrity and effective retention of fission products. The plates have separate recesses formed in the confronting surfaces for closely receiving the wire-like fissionable fuel members. The wire-like fissionable fuel members are made of a maleable uranium alloy capable of being formed into elongated wire-like members and capable of withstanding pressure bonding. The wire-like fissionable fuel members are completely separated and isolated by fully united portions of the interface.

Travelli, A.

1988-01-19T23:59:59.000Z

353

Overview of Requirements for Using Overweight Vehicles to Ship Spent Nuclear Fuel  

SciTech Connect

The U.S. Department of Energy's (DOE's) Final Environmental Impact Statement for a Geologic Repository for the Disposal of Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain, Nye County, Nevada, considered a range of options for transportation. In evaluating the impacts of the mostly-legal weight truck scenario, DOE assumed that some shipments would use overweight trucks. The use of overweight trucks is also considered in the Draft Supplemental Environmental Impact Statement for a Geologic Repository for the Disposal of Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain, Nye County, Nevada, issued for public comment in Fall 2007. With the exception of permit requirements and operating restrictions, the vehicles for overweight shipments would be similar to legal-weight truck shipments but might weigh as much as 52,200 kilograms (115,000 pounds). The use of overweight trucks was determined to be acceptable for the Office of Civilian Radioactive Waste Management (OCRWM) Program because the payload is not divisible and the packaging alone may make shipments overweight. Overweight truck shipments are common, and states routinely issue overweight permits, some for vehicles with a gross vehicle weight up to 58,500 kilograms (129,000 pounds). This paper will present an overview of state overweight truck permitting policies and national and regional approaches to promote safety and uniformity. In conclusion: Overweight truck shipments are made routinely by carriers throughout the country. State permits are obtained by the carriers or by companies that provide permitting services to the carriers. While varying state permit restrictions may add complexity to OCRWM's planning activities, the well-established experience of commercial carriers and efforts to bring uniformity to the permitting process should allow the overweight shipment of SNF to be a viable option. (authors)

Thrower, A.W. [U.S. Department of Energy, Office of Civilian Radioactive Waste Management, Washington, DC (United States); Offner, J. [Booz Allen Hamilton, Washington, DC (United States); Bolton, P. [Booz Allen Hamilton, Santa Fe, NM (United States)

2008-07-01T23:59:59.000Z

354

The Role of Nuclear Power in Reducing Risk of the Fossil Fuel Prices and Diversity of Electricity Generation in Tunisia: A Portfolio Approach  

Science Journals Connector (OSTI)

Given the global energy trend to substitute fossil fuel, the nuclear power has known an important ... degrees of uncertainties related to nuclear and fossil fuel. The higher uncertainty of fossil fuel prices make...

Mohamed Ben Abdelhamid; Chaker Aloui; Corinne Chaton…

2010-04-01T23:59:59.000Z

355

Atomic Diffusion in the Uranium-50wt% Zirconium Nuclear Fuel System  

E-Print Network (OSTI)

Atomic diffusion phenomena were examined in a metal-alloy nuclear fuel system composed of ?-phase U-50wt%Zr fuel in contact with either Zr-10wt%Gd or Zr-10wt%Er. Each alloy was fabricated from elemental feed material via melt-casting, and diffusion...

Eichel, Daniel

2013-06-17T23:59:59.000Z

356

A Neural Network Model for the Tomographic Analysis of Irradiated Nuclear Fuel Rods  

SciTech Connect

A tomographic method based on a multilayer feed-forward artificial neural network is proposed for the reconstruction of gamma-radioactive fission product distribution in irradiated nuclear fuel rods. The quality of the method is investigated as compared to a conventional technique on experimental results concerning a Canada deuterium uranium reactor (CANDU)-type fuel rod irradiated in a TRIGA reactor.

Craciunescu, Teddy [National Institute of Nuclear Physics and Engineering (Romania)

2004-04-15T23:59:59.000Z

357

Coprocessed nuclear fuels containing (U, Pu) values as oxides, carbides or carbonitrides  

DOE Patents (OSTI)

Method for direct coprocessing of nuclear fuels derived from a product stream of fuels reprocessing facility containing uranium, plutonium, and fission product values comprising nitrate stabilization of said stream vacuum concentration to remove water and nitrates, neutralization to form an acid deficient feed solution for the internal gelation mode of sol-gel technology, green spherule formation, recovery and treatment for loading into a fuel element by vibra packed or pellet formation technologies.

Lloyd, M.H.

1981-01-09T23:59:59.000Z

358

Development of a techno-economic model to optimization DOE spent nuclear fuel disposition  

SciTech Connect

The purpose of the National Spent Nuclear Fuel (NSNF) Program conducted by Lockheed Martin Idaho Technology Co. (LMITCO) at the Idaho National Engineering and Environmental Laboratory (INEEL) is to evaluate what to do with the spent nuclear fuel (SNF) in the Department of Energy (DOE) complex. Final disposition of the SNF may require that the fuel be treated to minimize material concerns. The treatments may range from electrometallurgical treatment and chemical dissolution to engineering controls. Treatment options and treatment locations will depend on the fuel type and the current locations of the fuel. One of the first steps associated with selecting one or more sites for treating the SNF in the DOE complex is to determine the cost of each option. An economic analysis will assist in determining which fuel treatment alternative attains the optimum disposition of SNF at the lowest possible cost to the government and the public. For this study, a set of questions was developed for the electrometallurgical treatment process for fuels at several locations. The set of questions addresses all issues associated with the design, construction, and operation of a production facility. A matrix table was developed to determine questions applicable to various fuel treatment options. A work breakdown structure (WBS) was developed to identify a treatment process and costs from initial design to shipment of treatment products to final disposition. Costs will be applied to determine the life-cycle cost of each option. This technique can also be applied to other treatment techniques for treating spent nuclear fuel.

Ramer, R.J.; Plum, M.M.; Adams, J.P.; Dahl, C.A.

1997-11-01T23:59:59.000Z

359

Nuclear Power Plants and Their Fuel as Terrorist Targets  

Science Journals Connector (OSTI)

...applied to terrorism. To tell...Shipment Risk Estimates...Director of Nuclear Control Institute...said that an attack on a plant could make a huge...believe nuclear power is being...operation of nuclear facilities...applied to terrorism. To...Shipment Risk Estimates...Director of Nuclear Control Institute...said that an attack on a plant could make...believe nuclear power is being...

Douglas M. Chapin; Karl P. Cohen; W. Kenneth Davis; Edwin E. Kintner; Leonard J. Koch; John W. Landis; Milton Levenson; I. Harry Mandil; Zack T. Pate; Theodore Rockwell; Alan Schriesheim; John W. Simpson; Alexander Squire; Chauncey Starr; Henry E. Stone; John J. Taylor; Neil E. Todreas; Bertram Wolfe; Edwin L. Zebroski

2002-09-20T23:59:59.000Z

360

Apparatus and method for classifying fuel pellets for nuclear reactor  

DOE Patents (OSTI)

Control for the operation of a mechanical handling and gauging system for nuclear fuel pellets. The pellets are inspected for diameters, lengths, surface flaws and weights in successive stations. The control includes, a computer for commanding the operation of the system and its electronics and for storing and processing the complex data derived at the required high rate. In measuring the diameter, the computer enables the measurement of a calibration pellet, stores that calibration data and computes and stores diameter-correction factors and their addresses along a pellet. To each diameter measurement a correction factor is applied at the appropriate address. The computer commands verification that all critical parts of the system and control are set for inspection and that each pellet is positioned for inspection. During each cycle of inspection, the measurement operation proceeds normally irrespective of whether or not a pellet is present in each station. If a pellet is not positioned in a station, a measurement is recorded, but the recorded measurement indicates maloperation. In measuring diameter and length a light pattern including successive shadows of slices transverse for diameter or longitudinal for length are projected on a photodiode array. The light pattern is scanned electronically by a train of pulses. The pulses are counted during the scan of the lighted diodes. For evaluation of diameter the maximum diameter count and the number of slices for which the diameter exceeds a predetermined minimum is determined. For acceptance, the maximum must be less than a maximum level and the minimum must exceed a set number. For evaluation of length, the maximum length is determined. For acceptance, the length must be within maximum and minimum limits.

Wilks, Robert S. (Plum Borough, PA); Sternheim, Eliezer (Pittsburgh, PA); Breakey, Gerald A. (Penn Township, Allegheny County, PA); Sturges, Jr., Robert H. (Plum Borough, PA); Taleff, Alexander (Churchill Borough, PA); Castner, Raymond P. (Monroeville, PA)

1984-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Systems Analysis of an Advanced Nuclear Fuel Cycle Based on a Modified UREX+3c Process  

SciTech Connect

The research described in this report was performed under a grant from the U.S. Department of Energy (DOE) to describe and compare the merits of two advanced alternative nuclear fuel cycles -- named by this study as the “UREX+3c fuel cycle” and the “Alternative Fuel Cycle” (AFC). Both fuel cycles were assumed to support 100 1,000 MWe light water reactor (LWR) nuclear power plants operating over the period 2020 through 2100, and the fast reactors (FRs) necessary to burn the plutonium and minor actinides generated by the LWRs. Reprocessing in both fuel cycles is assumed to be based on the UREX+3c process reported in earlier work by the DOE. Conceptually, the UREX+3c process provides nearly complete separation of the various components of spent nuclear fuel in order to enable recycle of reusable nuclear materials, and the storage, conversion, transmutation and/or disposal of other recovered components. Output of the process contains substantially all of the plutonium, which is recovered as a 5:1 uranium/plutonium mixture, in order to discourage plutonium diversion. Mixed oxide (MOX) fuel for recycle in LWRs is made using this 5:1 U/Pu mixture plus appropriate makeup uranium. A second process output contains all of the recovered uranium except the uranium in the 5:1 U/Pu mixture. The several other process outputs are various waste streams, including a stream of minor actinides that are stored until they are consumed in future FRs. For this study, the UREX+3c fuel cycle is assumed to recycle only the 5:1 U/Pu mixture to be used in LWR MOX fuel and to use depleted uranium (tails) for the makeup uranium. This fuel cycle is assumed not to use the recovered uranium output stream but to discard it instead. On the other hand, the AFC is assumed to recycle both the 5:1 U/Pu mixture and all of the recovered uranium. In this case, the recovered uranium is reenriched with the level of enrichment being determined by the amount of recovered plutonium and the combined amount of the resulting MOX. The study considered two sub-cases within each of the two fuel cycles in which the uranium and plutonium from the first generation of MOX spent fuel (i) would not be recycled to produce a second generation of MOX for use in LWRs or (ii) would be recycled to produce a second generation of MOX fuel for use in LWRs. The study also investigated the effects of recycling MOX spent fuel multiple times in LWRs. The study assumed that both fuel cycles would store and then reprocess spent MOX fuel that is not recycled to produce a next generation of LWR MOX fuel and would use the recovered products to produce FR fuel. The study further assumed that FRs would begin to be brought on-line in 2043, eleven years after recycle begins in LWRs, when products from 5-year cooled spent MOX fuel would be available. Fuel for the FRs would be made using the uranium, plutonium, and minor actinides recovered from MOX. For the cases where LWR fuel was assumed to be recycled one time, the 1st generation of MOX spent fuel was used to provide nuclear materials for production of FR fuel. For the cases where the LWR fuel was assumed to be recycled two times, the 2nd generation of MOX spent fuel was used to provide nuclear materials for production of FR fuel. The number of FRs in operation was assumed to increase in successive years until the rate that actinides were recovered from permanently discharged spent MOX fuel equaled the rate the actinides were consumed by the operating fleet of FRs. To compare the two fuel cycles, the study analyzed recycle of nuclear fuel in LWRs and FRs and determined the radiological characteristics of irradiated nuclear fuel, nuclear waste products, and recycle nuclear fuels. It also developed a model to simulate the flows of nuclear materials that could occur in the two advanced nuclear fuel cycles over 81 years beginning in 2020 and ending in 2100. Simulations projected the flows of uranium, plutonium, and minor actinides as these nuclear fuel materials were produced and consumed in a fleet of 100 1,000 MWe LWRs and in FRs. The model als

E. R. Johnson; R. E. Best

2009-12-28T23:59:59.000Z

362

Hydrogen Gas Production from Nuclear Power Plant in Relation to Hydrogen Fuel Cell Technologies Nowadays  

Science Journals Connector (OSTI)

Recently world has been confused by issues of energy resourcing including fossil fuel use global warming and sustainable energy generation. Hydrogen may become the choice for future fuel of combustion engine. Hydrogen is an environmentally clean source of energy to end?users particularly in transportation applications because without release of pollutants at the point of end use. Hydrogen may be produced from water using the process of electrolysis. One of the GEN?IV reactors nuclear projects (HTGRs HTR VHTR) is also can produce hydrogen from the process. In the present study hydrogen gas production from nuclear power plant is reviewed in relation to commercialization of hydrogen fuel cell technologies nowadays.

2010-01-01T23:59:59.000Z

363

Evaluation of Radiation Impacts of Spent Nuclear Fuel Storage (SNFS-2) of Chernobyl NPP - 13495  

SciTech Connect

Radiation effects are estimated for the operation of a new dry storage facility for spent nuclear fuel (SNFS-2) of Chernobyl NPP RBMK reactors. It is shown that radiation exposure during normal operation, design and beyond design basis accidents are minor and meet the criteria for safe use of radiation and nuclear facilities in Ukraine. (authors)

Paskevych, Sergiy; Batiy, Valiriy; Sizov, Andriy [Institute for Safety Problems of Nuclear Power Plants, National Academy of Sciences of Ukraine, 36 a Kirova str. Chornobyl, Kiev region, 07200 (Ukraine)] [Institute for Safety Problems of Nuclear Power Plants, National Academy of Sciences of Ukraine, 36 a Kirova str. Chornobyl, Kiev region, 07200 (Ukraine); Schmieman, Eric [Battelle Memorial Institute, PO Box 999 MSIN K6-90, Richland, WA 99352 (United States)] [Battelle Memorial Institute, PO Box 999 MSIN K6-90, Richland, WA 99352 (United States)

2013-07-01T23:59:59.000Z

364

Development of monolithic nuclear fuels for RERTR by hot isostatic pressing  

SciTech Connect

The RERTR Program (Reduced Enrichment for Research and Test Reactors) is developing advanced nuclear fuels for high power test reactors. Monolithic fuel design provides a higher uranium loading than that of the traditional dispersion fuel design. In order to bond monolithic fuel meat to aluminum cladding, several bonding methods such as roll bonding, friction stir bonding and hot isostatic pressing, have been explored. Hot isostatic pressing is a promising process for low cost, batch fabrication of monolithic RERTR fuel plates. The progress on the development of this process at the Idaho National Laboratory will be presented. Due to the relatively high processing temperature used, the reaction between fuel meat and aluminum cladding to form brittle intermetallic phases may be a concern. The effect of processing temperature and time on the fuel/cladding reaction will be addressed. The influence of chemical composition on the reaction will also be discussed. (author)

Jue, J.-F.; Park, Blair; Chapple, Michael; Moore, Glenn; Keiser, Dennis [Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID 83415 (United States)

2008-07-15T23:59:59.000Z

365

Final Report - Spent Nuclear Fuel Retrieval System Manipulator System Cold Validation Testing  

SciTech Connect

Manipulator system cold validation testing (CVT) was performed in support of the Fuel Retrieval System (FRS) Sub-Project, a subtask of the Spent Nuclear Fuel Project at the Hanford Site in Richland, Washington. The FRS will be used to retrieve and repackage K-Basin Spent Nuclear Fuel (SNF) currently stored in old K-Plant storage basins. The FRS is required to retrieve full fuel canisters from the basin; clean the fuel elements inside the canister to remove excessive uranium corrosion products (or sludge); remove the contents from the canisters; and sort the resulting debris, scrap, and fuel for repackaging. The fuel elements and scrap will be collected in fuel storage and scrap baskets in preparation for loading into a multi canister overpack (MCO), while the debris is loaded into a debris bin and disposed of as solid waste. The FRS is composed of three major subsystems. The Manipulator Subsystem provides remote handling of fuel, scrap, and debris; the In-Pool Equipment subsystem performs cleaning of fuel and provides a work surface for handling materials; and the Remote Viewing Subsystem provides for remote viewing of the work area by operators. There are two complete and identical FRS systems, one to be installed in the K-West basin and one to be installed in the K-East basin. Another partial system will be installed in a cold test facility to provide for operator training.

D.R. Jackson; G.R. Kiebel

1999-08-24T23:59:59.000Z

366

Accelerator-driven subcritical fission in molten salt core: Closing the nuclear fuel cycle for green nuclear energy  

SciTech Connect

A technology for accelerator-driven subcritical fission in a molten salt core (ADSMS) is being developed as a basis for the destruction of the transuranics in used nuclear fuel. The molten salt fuel is a eutectic mixture of NaCl and the chlorides of the transuranics and fission products. The core is driven by proton beams from a strong-focusing cyclotron stack. This approach uniquely provides an intrinsically safe means to drive a core fueled only with transuranics, thereby eliminating competing breeding terms.

McIntyre, Peter; Assadi, Saeed; Badgley, Karie; Baker, William; Comeaux, Justin; Gerity, James; Kellams, Joshua; McInturff, Al; Pogue, Nathaniel; Sattarov, Akhdiyor; Sooby, Elizabeth; Tsvetkov, Pavel [Dept. of Physics, Texas A and M University, College Station, TX 77843 and Dept. of Nuclear Engineering, Texas A and M University, College Station, TX 77843 (United States); Phongikaroon, Supathorn; Simpson, Michael [Dept. of Chemical Engineering, University of Idaho, Idaho Falls ID 83402 (United States)

2013-04-19T23:59:59.000Z

367

International auspices for the storage of spent nuclear fuel as a nonproliferation measure  

SciTech Connect

The maintenance of spent nuclear fuel from power reactors will pose problems regardless of how or when the debate over reprocessing is resolved. At present, many reactor sites contain significant buildups of spent fuel stored in holding pools, and no measure short of shutting down reactors with no remaining storage capacity will alleviate the need for away-from-reactor storage. Although the federal government has committed itself to dealing with the spent fuel problem, no solution has been reached, largely because of a debate over differing projections of storage capacity requirements. Proliferation of weapons grade nuclear material in many nations presents another pressing issue. If nations with small nuclear programs are forced to deal with their own spent fuel accumulations, they will either have to reprocess it indigenously or contract to have it reprocessed in a foreign reprocessing plant. In either case, these nations may eventually possess sufficient resources to assemble a nuclear weapon. The problem of spent fuel management demands real global solutions, and further delay in solving the problem of spent nuclear fuel accumulation, both nationally and globally, can benefit only a small class of elected officials in the short term and may inflict substantial costs on the American public, and possibly the world. (JMT)

O'Brien, J.N.

1981-10-01T23:59:59.000Z

368

Management of super-grade plutonium in spent nuclear fuel  

SciTech Connect

This paper examines the security and safeguards implications of potential management options for DOE's sodium-bonded blanket fuel from the EBR-II and the Fermi-1 fast reactors. The EBR-II fuel appears to be unsuitable for the packaging alternative because of DOE's current safeguards requirements for plutonium. Emerging DOE requirements, National Academy of Sciences recommendations, draft waste acceptance requirements for Yucca Mountain and IAEA requirements for similar fuel also emphasize the importance of safeguards in spent fuel management. Electrometallurgical treatment would be acceptable for both fuel types. Meeting the known requirements for safeguards and security could potentially add more than $200M in cost to the packaging option for the EBR-II fuel.

McFarlane, H. F.; Benedict, R. W.

2000-03-20T23:59:59.000Z

369

Safety Aspects of Wet Storage of Spent Nuclear Fuel, OAS-L-13-11  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Safety Aspects of Wet Storage of Safety Aspects of Wet Storage of Spent Nuclear Fuel OAS-L-13-11 July 2013 Department of Energy Washington, DC 20585 July 10, 2013 MEMORANDUM FOR THE SENIOR ADVISOR FOR ENVIRONMENTAL MANAGEMENT FROM: Daniel M. Weeber Assistant Inspector General for Audits and Administration Office of Inspector General SUBJECT: INFORMATION: Audit Report on "Safety Aspects of Wet Storage of Spent Nuclear Fuel" BACKGROUND The Department of Energy (Department) is responsible for managing and storing spent nuclear fuel (SNF) generated by weapons and research programs and recovered through nonproliferation programs. The SNF consists of irradiated reactor fuel and cut up assemblies containing uranium, thorium and/or plutonium. The Department stores 34 metric tons of heavy metal SNF primarily

370

RADIOLOGICAL EMERGENCY RESPONSE PLANNING FOR NUCLEAR POWER PLANTS IN CALIFORNIA. VOLUME 4 OF THE FINAL REPORT ON HEALTH AND SAFETY IMPACTS OF NUCLEAR, GEOTHERMAL, AND FOSSIL-FUEL ELECTRIC GENERATION IN CALIFORNIA  

E-Print Network (OSTI)

HEALTH AND SAFETY IMPACTS OF NUCLEAR, GEOTHERMAL, AND FOSSIL-FUELHealth and Safety Impacts of Nuclear, Geothermal, and Fossil- FuelHealth and Safety Aspects of Pro- posed Nuclear, Geothermal, and Fossil-Fuel

Yen, W.W.S.

2010-01-01T23:59:59.000Z

371

Nuclear Resonance Fluorescence to Measure Plutonium Mass in Spent Nuclear Fuel  

E-Print Network (OSTI)

and Nuclear Recoil . . . . . . . . . . . . . . . . . . . . .2 Quantitative Measurements using NRF 2.1 Nuclear ResonanceFuture Work A Transmission Nuclear Resonance Fluorescence

Ludewigt, Bernhard A

2011-01-01T23:59:59.000Z

372

Advanced Nuclear Fuel | Y-12 National Security Complex  

NLE Websites -- All DOE Office Websites (Extended Search)

operate; lowers proliferation risks by reducing the need for enriched uranium; converts depleted uranium to usable fuel as it operates; uses liquid sodium as a coolant, which is...

373

Submersion Criticality Safety Analysis of Tungsten-Based Fuel for Nuclear Power and Propulsion Applications  

SciTech Connect

The Center for Space Nuclear Research (CSNR) is developing tungsten-encapsulated fuels for space nuclear applications. Aims to develop NTP fuels that are; Affordable Low impact on production and testing environment Producible on a large scale over suitable time period Higher-performance compared to previous graphite NTP fuel elements Space nuclear reactors remain subcritical before and during launch, and do not go critical until required by its mission. A properly designed reactor will remain subcritical in any launch abort scenario, where the reactor falls back to Earth and becomes submerged in terrestrial material. Submersion increases neutron reflection and thermalizes the neutrons, which typically increases the reactivity of the core. This effect is usually very significant for fast-spectrum reactors. This research provided a submersion criticality safety analysis for a representative tungsten/uranium oxide fueled reactor. Determine the submersion behavior of a reactor fueled by tungsten-based fuel. Considered fuel compositions with varying: Rhenium content (wt% rhenium in tungsten) Fuel loading fractions (UO2 vol%)

A.E. Craft; R. C. O'Brien; S. D. Howe; J. C. King

2014-07-01T23:59:59.000Z

374

U.S. Spent Nuclear Fuel Data as of December 31, 1998  

Gasoline and Diesel Fuel Update (EIA)

Spent Nuclear Fuel Data, Detailed United States as of December 31, 1998 Spent nuclear fuel data is collected by the Energy Information Administration (EIA) for the Office of Civilian Radioactive Waste Management (OCRWM). The spent nuclear fuel (SNF) data includes detailed characteristics of SNF generated by commercial U.S. nuclear power plants. From 1983 through 1995 this data was collected annually. Since 1996 this data has been collected every three years. The latest available detailed data covers all SNF discharged from commercial reactors before December 31, 1998, and is maintained in a database by the EIA. Summary data tables from this database may be found as indicated below. The detailed data are available on request from Jim Finucane who can be reached at 202-287-1966 or at

375

EIS-0250: Geologic Repository for the Disposal of Spent Nuclear Fuel and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EIS-0250: Geologic Repository for the Disposal of Spent Nuclear EIS-0250: Geologic Repository for the Disposal of Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain, Nye County, Nevada EIS-0250: Geologic Repository for the Disposal of Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain, Nye County, Nevada Summary This EIS analyzes DOE's proposed action to construct, operate, monitor, and eventually close a geologic repository at Yucca Mountain for the disposal of spent nuclear fuel and high-level radioactive waste. The EIS evaluates not only impacts from constructing, operating, monitoring, and closing a repository, but also from transporting the materials from 72 commercial and 4 DOE sites to the Yucca Mountain repository site in Nye County, Nevada. Public Comment Opportunities

376

RUSSIAN-ORIGIN HIGHLY ENRICHED URANIUM SPENT NUCLEAR FUEL SHIPMENT FROM BULGARIA  

SciTech Connect

In July 2008, the Global Threat Reduction Initiative and the IRT 2000 research reactor in Sofia, Bulgaria, operated by the Institute for Nuclear Research and Nuclear Energy (INRNE), safely shipped 6.4 kilograms of Russian origin highly enriched uranium (HEU) spent nuclear fuel (SNF) to the Russian Federation. The shipment, which resulted in the removal of all HEU from Bulgaria, was conducted by truck, barge, and rail modes of transport across two transit countries before reaching the final destination at the Production Association Mayak facility in Chelyabinsk, Russia. This paper describes the work, equipment, organizations, and approvals that were required to complete the spent fuel shipment and provides lessons learned that might assist other research reactor operators with their own spent nuclear fuel shipments.

Kelly Cummins; Igor Bolshinsky; Ken Allen; Tihomir Apostolov; Ivaylo Dimitrov

2009-07-01T23:59:59.000Z

377

Human capital needs - teaching, training and coordination for nuclear fuel cycle  

SciTech Connect

Human capital is the accumulation of competencies, knowledge, social and creativity skills and personality attributes, which are necessary to perform work so as to produce economic value. In the frame of the nuclear fuel cycle, this is of paramount importance that the right human capital exists and in Europe this is fostered by a series of integrated or directed projects. The teaching, training and coordination will be discussed in the frame of University curricula with examples from several programs, like e.g. the Master of Nuclear Engineering at Chalmers University, Sweden and two FP7 EURATOM Projects: CINCH - a project for cooperation in nuclear chemistry - and ASGARD - a research project on advanced or novel nuclear fuels and their reprocessing issues for generation IV reactors. The integration of the university curricula in the market needs but also the anchoring in the research and future fuel cycles will be also discussed, with examples from the ASGARD project. (authors)

Retegan, T.; Ekberg, C. [Department of Chemistry and Biological Engineering, Nuclear Chemistry, Chalmers University of Technology, Kemivaegen 4, 41296 Gothenburg (Sweden); John, J. [Department of Nuclear Chemistry, Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Brehova 7, 115 19 Prague 1 (Czech Republic); Nordlund, A. [Nuclear Engineering, Chalmers University of Technology, Kemivaegen 4, 41296 Gothenburg (Sweden)

2013-07-01T23:59:59.000Z

378

Preparation for the Recovery of Spent Nuclear Fuel (SNF) at Andreeva Bay, North West Russia - 13309  

SciTech Connect

Andreeva Bay is located near Murmansk in the Russian Federation close to the Norwegian border. The ex-naval site was used to de-fuel nuclear-powered submarines and icebreakers during the Cold War. Approximately 22,000 fuel assemblies remain in three Dry Storage Units (DSUs) which means that Andreeva Bay has one of the largest stockpiles of highly enriched spent nuclear fuel (SNF) in the world. The high contamination and deteriorating condition of the SNF canisters has made improvements to the management of the SNF a high priority for the international community for safety, security and environmental reasons. International Donors have, since 2002, provided support to projects at Andreeva concerned with improving the management of the SNF. This long-term programme of work has been coordinated between the International Donors and responsible bodies within the Russian Federation. Options for the safe and secure management of SNF at Andreeva Bay were considered in 2004 and developed by a number of Russian Institutes with international participation. This consisted of site investigations, surveys and studies to understand the technical challenges. A principal agreement was reached that the SNF would be removed from the site altogether and transported to Russia's reprocessing facility at Mayak in the Urals. The analytical studies provided the information necessary to develop the construction plan for the site. Following design and regulatory processes, stakeholders endorsed the technical solution in April 2007. This detailed the processes, facilities and equipment required to safely remove the SNF and identified other site services and support facilities required on the site. Implementation of this strategy is now well underway with the facilities in various states of construction. Physical works have been performed to address the most urgent tasks including weather protection over one of the DSUs, installation of shielding over the cells, provision of radiation protection infrastructure and general preparation of the site for construction of the facilities for the removal of the SNF. This paper describes the development and implementation of the strategy and work to improve the safe and secure management of SNF, preparing it for retrieval and removal from Andreeva Bay. (authors)

Field, D.; McAtamney, N. [Nuvia Limited (United Kingdom)] [Nuvia Limited (United Kingdom)

2013-07-01T23:59:59.000Z

379

The First W76 Warhead Returns to Service | National Nuclear Security  

National Nuclear Security Administration (NNSA)

First W76 Warhead Returns to Service | National Nuclear Security First W76 Warhead Returns to Service | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > About Us > Our History > NNSA Timeline > The First W76 Warhead Returns to Service The First W76 Warhead Returns to Service February 23, 2009 Amarillo, TX The First W76 Warhead Returns to Service

380

Uncanistered Spent Nuclear fuel Disposal Container System Description Document  

SciTech Connect

The Uncanistered Spent Nuclear Fuel (SNF) Disposal Container System supports the confinement and isolation of waste within the Engineered Barrier System of the Monitored Geologic Repository (MGR). Disposal containers are loaded with intact uncanistered assemblies and/or individually canistered SNF assemblies and sealed in the surface waste handling facilities, transferred to the underground through the access drifts, and emplaced in the emplacement drifts. The Uncanistered SNF Disposal Container provides long-term confinement of the commercial SNF placed inside, and withstands the loading, transfer, emplacement, and retrieval loads and environments. The Uncanistered SNF Disposal Container System provides containment of waste for a designated period of time, and limits radionuclide release. The disposal container maintains the waste in a designated configuration, withstands maximum handling and rockfall loads, limits the individual SNF assembly temperatures after emplacement, limits the introduction of moderator into the disposal container during the criticality control period, resists corrosion in the expected handling and repository environments, and provides containment of waste in the event of an accident. Multiple boiling water reactor (BWR) and pressurized water reactor (PWR) disposal container designs are needed to accommodate the expected range of spent fuel assemblies and provide long-term confinement of the commercial SNF. The disposal container will include outer and inner cylinder walls, outer cylinder lids (two on the top, one on the bottom), inner cylinder lids (one on the top, one on the bottom), and an internal metallic basket structure. Exterior labels will provide a means by which to identify the disposal container and its contents. The two metal cylinders, in combination with the cladding, Emplacement Drift System, drip shield, and natural barrier, will support the design philosophy of defense-in-depth. The use of materials with different properties prevents a single mode failure from breaching the waste package. The inner cylinder and inner cylinder lids will be constructed of stainless steel and the outer cylinder and outer cylinder lid will be made of high-nickel alloy. The basket will assist criticality control, provide structural support, and improve heat transfer. The Uncanistered SNF Disposal Container System interfaces with the emplacement drift environment and internal waste by transferring heat from the SNF to the external environment and by protecting the SFN assemblies and their contents from damage/degradation by the external environment. The system also interfaces with the SFN by limiting access of moderator and oxidizing agents of the SFN. The waste package interfaces with the Emplacement Drift System's emplacement drift pallets upon which the wasted packages are placed. The disposal container interfaces with the Assembly Transfer System, Waste Emplacement/Retrieval System, Disposal Container Handling System, and Waste Package Remediation System during loading, handling, transfer, emplacement and retrieval of the disposal container/waste package.

NONE

2000-10-12T23:59:59.000Z

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Dry Storage of Research Reactor Spent Nuclear Fuel - 13321  

SciTech Connect

Spent fuel from domestic and foreign research reactors is received and stored at the Savannah River Site's L Area Material Storage (L Basin) Facility. This DOE-owned fuel consists primarily of highly enriched uranium in metal, oxide or silicide form with aluminum cladding. Upon receipt, the fuel is unloaded and transferred to basin storage awaiting final disposition. Disposition alternatives include processing via the site's H Canyon facility for uranium recovery, or packaging and shipment of the spent fuel to a waste repository. A program has been developed to provide a phased approach for dry storage of the L Basin fuel. The initial phase of the dry storage program will demonstrate loading, drying, and storage of fuel in twelve instrumented canisters to assess fuel performance. After closure, the loaded canisters are transferred to pad-mounted concrete overpacks, similar to those used for dry storage of commercial fuel. Unlike commercial spent fuel, however, the DOE fuel has high enrichment, very low to high burnup, and low decay heat. The aluminum cladding presents unique challenges due to the presence of an oxide layer that forms on the cladding surface, and corrosion degradation resulting from prolonged wet storage. The removal of free and bound water is essential to the prevention of fuel corrosion and radiolytic generation of hydrogen. The demonstration will validate models predicting pressure, temperature, gas generation, and corrosion performance, provide an engineering scale demonstration of fuel handling, drying, leak testing, and canister backfill operations, and establish 'road-ready' storage of fuel that is suitable for offsite repository shipment or retrievable for onsite processing. Implementation of the Phase I demonstration can be completed within three years. Phases II and III, leading to the de-inventory of L Basin, would require an additional 750 canisters and 6-12 years to complete. Transfer of the fuel from basin storage to dry storage requires integration with current facility operations, and selection of equipment that will allow safe operation within the constraints of existing facility conditions. Examples of such constraints that are evaluated and addressed by the dry storage program include limited basin depth, varying fuel lengths up to 4 m, (13 ft), fissile loading limits, canister closure design, post-load drying and closure of the canisters, instrument selection and installation, and movement of the canisters to storage casks. The initial pilot phase restricts the fuels to shorter length fuels that can be loaded to the canister directly underwater; subsequent phases will require use of a shielded transfer system. Removal of the canister from the basin, followed by drying, inerting, closure of the canister, and transfer of the canister to the storage cask are completed with remotely operated equipment and appropriate shielding to reduce personnel radiation exposure. (authors)

Adams, T.M.; Dunsmuir, M.D.; Leduc, D.R.; Severynse, T.F.; Sindelar, R.L. [Savannah River National Laboratory (United States)] [Savannah River National Laboratory (United States); Moore, E.N. [Moore Nuclear Energy, LLC (United States)] [Moore Nuclear Energy, LLC (United States)

2013-07-01T23:59:59.000Z

382

The Path to Sustainable Nuclear Energy. Basic and Applied Research Opportunities for Advanced Fuel Cycles  

SciTech Connect

The objective of this report is to identify new basic science that will be the foundation for advances in nuclear fuel-cycle technology in the near term, and for changing the nature of fuel cycles and of the nuclear energy industry in the long term. The goals are to enhance the development of nuclear energy, to maximize energy production in nuclear reactor parks, and to minimize radioactive wastes, other environmental impacts, and proliferation risks. The limitations of the once-through fuel cycle can be overcome by adopting a closed fuel cycle, in which the irradiated fuel is reprocessed and its components are separated into streams that are recycled into a reactor or disposed of in appropriate waste forms. The recycled fuel is irradiated in a reactor, where certain constituents are partially transmuted into heavier isotopes via neutron capture or into lighter isotopes via fission. Fast reactors are required to complete the transmutation of long-lived isotopes. Closed fuel cycles are encompassed by the Department of Energy?s Advanced Fuel Cycle Initiative (AFCI), to which basic scientific research can contribute. Two nuclear reactor system architectures can meet the AFCI objectives: a ?single-tier? system or a ?dual-tier? system. Both begin with light water reactors and incorporate fast reactors. The ?dual-tier? systems transmute some plutonium and neptunium in light water reactors and all remaining transuranic elements (TRUs) in a closed-cycle fast reactor. Basic science initiatives are needed in two broad areas: ? Near-term impacts that can enhance the development of either ?single-tier? or ?dual-tier? AFCI systems, primarily within the next 20 years, through basic research. Examples: Dissolution of spent fuel, separations of elements for TRU recycling and transmutation Design, synthesis, and testing of inert matrix nuclear fuels and non-oxide fuels Invention and development of accurate on-line monitoring systems for chemical and nuclear species in the nuclear fuel cycle Development of advanced tools for designing reactors with reduced margins and lower costs ? Long-term nuclear reactor development requires basic science breakthroughs: Understanding of materials behavior under extreme environmental conditions Creation of new, efficient, environmentally benign chemical separations methods Modeling and simulation to improve nuclear reaction cross-section data, design new materials and separation system, and propagate uncertainties within the fuel cycle Improvement of proliferation resistance by strengthening safeguards technologies and decreasing the attractiveness of nuclear materials A series of translational tools is proposed to advance the AFCI objectives and to bring the basic science concepts and processes promptly into the technological sphere. These tools have the potential to revolutionize the approach to nuclear engineering R&D by replacing lengthy experimental campaigns with a rigorous approach based on modeling, key fundamental experiments, and advanced simulations.

Finck, P.; Edelstein, N.; Allen, T.; Burns, C.; Chadwick, M.; Corradini, M.; Dixon, D.; Goff, M.; Laidler, J.; McCarthy, K.; Moyer, B.; Nash, K.; Navrotsky, A.; Oblozinsky, P.; Pasamehmetoglu, K.; Peterson, P.; Sackett, J.; Sickafus, K. E.; Tulenko, J.; Weber, W.; Morss, L.; Henry, G.

2005-09-01T23:59:59.000Z

383

Incorporation of a risk analysis approach for the nuclear fuel cycle advanced transparency framework.  

SciTech Connect

Proliferation resistance features that reduce the likelihood of diversion of nuclear materials from the civilian nuclear power fuel cycle are critical for a global nuclear future. A framework that monitors process information continuously can demonstrate the ability to resist proliferation by measuring and reducing diversion risk, thus ensuring the legitimate use of the nuclear fuel cycle. The automation of new nuclear facilities requiring minimal manual operation makes this possible by generating instantaneous system state data that can be used to track and measure the status of the process and material at any given time. Sandia National Laboratories (SNL) and the Japan Atomic Energy Agency (JAEA) are working in cooperation to develop an advanced transparency framework capable of assessing diversion risk in support of overall plant transparency. The ''diversion risk'' quantifies the probability and consequence of a host nation diverting nuclear materials from a civilian fuel cycle facility. This document introduces the details of the diversion risk quantification approach to be demonstrated in the fuel handling training model of the MONJU Fast Reactor.

Mendez, Carmen Margarita (Sociotecnia Solutions, LLC); York, David L.; Inoue, Naoko (Japan Atomic Energy Agency); Kitabata, Takuya (Japan Atomic Energy Agency); Vugrin, Eric D.; Vugrin, Kay White; Rochau, Gary Eugene; Cleary, Virginia D.

2007-05-01T23:59:59.000Z

384

New generation nuclear fuel structures: dense particles in selectively soluble matrix  

SciTech Connect

We have developed a technology for dispersing sub-millimeter sized fuel particles within a bulk matrix that can be selectively dissolved. This may enable the generation of advanced nuclear fuels with easy separation of actinides and fission products. The large kinetic energy of the fission products results in most of them escaping from the sub-millimeter sized fuel particles and depositing in the matrix during burning of the fuel in the reactor. After the fuel is used and allowed to cool for a period of time, the matrix can be dissolved and the fission products removed for disposal while the fuel particles are collected by filtration for recycle. The success of such an approach would meet a major goal of the GNEP program to provide advanced recycle technology for nuclear energy production. The benefits of such an approach include (1) greatly reduced cost of the actinide/fission product separation process, (2) ease of recycle of the fuel particles, and (3) a radiation barrier to prevent theft or diversion of the recycled fuel particles during the time they are re-fabricated into new fuel. In this study we describe a method to make surrogate nuclear fuels of micrometer scale W (shell)/Mo (core) or HfO2 particles embedded in an MgO matrix that allows easy separation of the fission products and their embedded particles. In brief, the method consists of physically mixing W-Mo or hafnia particles with an MgO precursor. Heating the mixture, in air or argon, without agitation, to a temperature is required for complete decomposition of the precursor. The resulting material was examined using chemical analysis, scanning electron microscopy, X-ray diffraction and micro X-ray computed tomography and found to consist of evenly dispersed particles in an MgO + matrix. We believe this methodology can be extended to actinides and other matrix materials.

Sickafus, Kurt E [Los Alamos National Laboratory; Devlin, David J [Los Alamos National Laboratory; Jarvinen, Gordon D [Los Alamos National Laboratory; Patterson, Brian M [Los Alamos National Laboratory; Pattillo, Steve G [Los Alamos National Laboratory; Valdez, James [Los Alamos National Laboratory; Phillips, Jonathan [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

385

RADIATION DOSE ASPECTS IN THE HANDLING OF EMERGING NUCLEAR FUELS  

Science Journals Connector (OSTI)

......Radiol. Prot. (2008) 28:161. 15 NUREG. Standard review plan for the review of an application for a Mixed Oxide (MOX) fuel...facilities specific safety guide. (2010) IAEA Safety Standards Series No. SSG-6, International Atomic Energy......

G. Nicolaou

2014-02-01T23:59:59.000Z

386

Nuclear tanker producing liquid fuels from air and water  

E-Print Network (OSTI)

Emerging technologies in CO? air capture, high temperature electrolysis, microchannel catalytic conversion, and Generation IV reactor plant systems have the potential to create a shipboard liquid fuel production system ...

Galle-Bishop, John Michael

2011-01-01T23:59:59.000Z

387

Fuel characterization for hydrogen-producing nuclear reactors.  

E-Print Network (OSTI)

??Reatores nucleares de 4 geração do tipo HTGR (reatores de alta temperatura refrigerados a gás) apresentam vantagens em relação a um reator a água pressurizada,… (more)

Kelly Cristina Martins Faêda

2011-01-01T23:59:59.000Z

388

Development of a Techno-Economic Model to Optimize DOE Spent Nuclear Fuel Disposition  

SciTech Connect

The National Spent Nuclear Fuel (NSNF) Program is evaluating final disposition of spent nuclear fuel (SNE) in the Department of Energy (DOE) complex. Final disposition of SNF may require that the fuel be treated to minimize material concerns. The treatments may range from electrometallurgical treatment (EMT) and chemical dissolution to engineering controls. Treatment options and treatment locations will depend on fuel type and location of the fuel. One of the first steps associated with selecting one or more sites for treating SNF in the DOE complex is to determine the cost of each option. An economic analysis will assist in determining which fuel treatment alternative attains the optimum disposition of SNF at the lowest possible cost to the government and the public. For this study, a set of questions was developed for the EMT process for fuels at several locations. The set of questions addresses all issues associated with design, construction, and operation of a production facility. A matrix table was developed to determine questions applicable to various fuel treatment options. A work breakdown structure (WBS) was developed to identify a treatment process and costs from initial design to shipment of treatment products to final disposition. Costs can be applied to determine the life cycle cost of each option. This technique can also be applied to other treatment techniques for treating SNF.

Ramer, R. J.; Plum, M. M.; Adams, J. P.; Dahl, C. A.

1998-02-01T23:59:59.000Z

389

MORTALITY AMONG WORKERS AT THE SAVANNAH RIVER NUCLEAR FUELS PRODUCTION FACILITY  

NLE Websites -- All DOE Office Websites (Extended Search)

MORTALITY AMONG WORKERS AT THE SAVANNAH RIVER NUCLEAR FUELS MORTALITY AMONG WORKERS AT THE SAVANNAH RIVER NUCLEAR FUELS PRODUCTION FACILITY Donna L. Cragle and Janice P. Watkins, Center for Epidemiologic Research; Kathryn Robertson-DeMers, Bechtel Hanford, Inc. Donna Cragle, Oak Ridge Associated Universities, P.O. Box 117, Oak Ridge, TN 37831-0117 Key Words: mortality study, radiation exposure, leukemia, occupational cohort, trend test INTRODUCTION Since 1952 the Savannah River Site (SRS), located in Aiken, South Carolina, has operated as a Department of Energy (DOE) production facility for nuclear fuels and other materials. A previous study 1 through 1980 of 9,860 white males employed at least 90 consecutive days at the SRS between 1952 and 1974 found an increased number of leukemia deaths among

390

Preliminary Notice of Violation, West Valley Nuclear Services - EA-1999-09  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

West Valley Nuclear Services - West Valley Nuclear Services - EA-1999-09 Preliminary Notice of Violation, West Valley Nuclear Services - EA-1999-09 December 7, 1999 Preliminary Notice of Violation issued to West Valley Nuclear Services, related to a High-Level Radioactive Waste Contamination Event at the West Valley Demonstration Project,(EA-1999-09) This letter refers to the Department of Energy's (DOE) investigation of the facts and circumstances concerning the contamination of a level/density line at the West Valley Demonstration Project's Vitrification Facility, with high-level radioactive waste (HLW). Specifically, on August 10, 1999, while conducting a steam purge of level/density probes to resolve erratic readings from the probes, HLW was instead aspirated into the level/density

391

Preliminary Notice of Violation, West Valley Nuclear Services - EA-1999-09  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

West Valley Nuclear Services - West Valley Nuclear Services - EA-1999-09 Preliminary Notice of Violation, West Valley Nuclear Services - EA-1999-09 December 7, 1999 Preliminary Notice of Violation issued to West Valley Nuclear Services, related to a High-Level Radioactive Waste Contamination Event at the West Valley Demonstration Project,(EA-1999-09) This letter refers to the Department of Energy's (DOE) investigation of the facts and circumstances concerning the contamination of a level/density line at the West Valley Demonstration Project's Vitrification Facility, with high-level radioactive waste (HLW). Specifically, on August 10, 1999, while conducting a steam purge of level/density probes to resolve erratic readings from the probes, HLW was instead aspirated into the level/density

392

VWZ-0011 - In the Matter of West Valley Nuclear Services Co., Inc. |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 - In the Matter of West Valley Nuclear Services Co., Inc. 1 - In the Matter of West Valley Nuclear Services Co., Inc. VWZ-0011 - In the Matter of West Valley Nuclear Services Co., Inc. This decision considers a "Motion to Dismiss" filed by West Valley Nuclear Services, Inc. (West Valley) on May 18, 1999. In its Motion, West Valley seeks the partial dismissal of a Complaint filed by John L. Gretencord (Gretencord) under the Department of Energy's (DOE) Contractor Employee Protection Program, which is codified at 10 C.F.R. Part 708. Mr. Gretencord requested a hearing on his Complaint under 10 C.F.R. Part 708 on March 19, 1999, and it has been assigned Office of Hearings and Appeals (OHA) Case No. VWA-0033. The present Motion has been assigned Case No. VWZ-0011. vwz0011.pdf More Documents & Publications

393

FY 2012 B&W Technical Services Pantex, LLC, PER Summary | National Nuclear  

National Nuclear Security Administration (NNSA)

2 B&W Technical Services Pantex, LLC, PER Summary | National Nuclear 2 B&W Technical Services Pantex, LLC, PER Summary | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog FY 2012 B&W Technical Services Pantex, LLC, PER Summary Home > About Us > Our Operations > Acquisition and Project Management > Performance Evaluations > FY 2012 B&W Technical Services Pantex, LLC, ...

394

VWZ-0010 - In the Matter of West Valley Nuclear Services Co., Inc. |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

VWZ-0010 - In the Matter of West Valley Nuclear Services Co., Inc. VWZ-0010 - In the Matter of West Valley Nuclear Services Co., Inc. VWZ-0010 - In the Matter of West Valley Nuclear Services Co., Inc. This decision considers a "Motion to Dismiss" filed by West Valley Nuclear Services, Inc. (West Valley) on April 27, 1999. In its Motion, West Valley seeks the dismissal of a Complaint filed by John L. Gretencord (Gretencord) under the Department of Energy's (DOE) Contractor Employee Protection Program, which is codified at 10 C.F.R. Part 708. Mr. Gretencord requested a hearing on his Complaint under 10 C.F.R. Part 708 on March 19, 1999, and it has been assigned Office of Hearings and Appeals (OHA) Case No. VWA-0033. The present Motion has been assigned Case No. VWZ-0010. vwz0010.pdf More Documents & Publications

395

Land and Water Use, CO2 Emissions, and Worker Radiological Exposure Factors for the Nuclear Fuel Cycle  

SciTech Connect

The Department of Energy Office of Nuclear Energy’s Fuel Cycle Technologies program is preparing to evaluate several proposed nuclear fuel cycle options to help guide and prioritize Fuel Cycle Technology research and development. Metrics are being developed to assess performance against nine evaluation criteria that will be used to assess relevant impacts resulting from all phases of the fuel cycle. This report focuses on four specific environmental metrics. • land use • water use • CO2 emissions • radiological Dose to workers Impacts associated with the processes in the front-end of the nuclear fuel cycle, mining through enrichment and deconversion of DUF6 are summarized from FCRD-FCO-2012-000124, Revision 1. Impact estimates are developed within this report for the remaining phases of the nuclear fuel cycle. These phases include fuel fabrication, reactor construction and operations, fuel reprocessing, and storage, transport, and disposal of associated used fuel and radioactive wastes. Impact estimates for each of the phases of the nuclear fuel cycle are given as impact factors normalized per unit process throughput or output. These impact factors can then be re-scaled against the appropriate mass flows to provide estimates for a wide range of potential fuel cycles. A companion report, FCRD-FCO-2013-000213, applies the impact factors to estimate and provide a comparative evaluation of 40 fuel cycles under consideration relative to these four environmental metrics.

Brett W Carlsen; Brent W Dixon; Urairisa Pathanapirom; Eric Schneider; Bethany L. Smith; Timothy M. AUlt; Allen G. Croff; Steven L. Krahn

2013-08-01T23:59:59.000Z

396

THE ECONOMICS OF REPROCESSING vs DIRECT DISPOSAL OF SPENT NUCLEAR FUEL  

SciTech Connect

This report assesses the economics of reprocessing versus direct disposal of spent nuclear fuel. The breakeven uranium price at which reprocessing spent nuclear fuel from existing light-water reactors (LWRs) and recycling the resulting plutonium and uranium in LWRs would become economic is assessed, using central estimates of the costs of different elements of the nuclear fuel cycle (and other fuel cycle input parameters), for a wide range of range of potential reprocessing prices. Sensitivity analysis is performed, showing that the conclusions reached are robust across a wide range of input parameters. The contribution of direct disposal or reprocessing and recycling to electricity cost is also assessed. The choice of particular central estimates and ranges for the input parameters of the fuel cycle model is justified through a review of the relevant literature. The impact of different fuel cycle approaches on the volume needed for geologic repositories is briefly discussed, as are the issues surrounding the possibility of performing separations and transmutation on spent nuclear fuel to reduce the need for additional repositories. A similar analysis is then performed of the breakeven uranium price at which deploying fast neutron breeder reactors would become competitive compared with a once-through fuel cycle in LWRs, for a range of possible differences in capital cost between LWRs and fast neutron reactors. Sensitivity analysis is again provided, as are an analysis of the contribution to electricity cost, and a justification of the choices of central estimates and ranges for the input parameters. The equations used in the economic model are derived and explained in an appendix. Another appendix assesses the quantities of uranium likely to be recoverable worldwide in the future at a range of different possible future prices.

Matthew Bunn; Steve Fetter; John P. Holdren; Bob van der Zwaan

2003-07-01T23:59:59.000Z

397

Fuel element design for the enhanced destruction of plutonium in a nuclear reactor  

DOE Patents (OSTI)

A uranium-free fuel for a fast nuclear reactor comprising an alloy of Pu, Zr and Hf, wherein Hf is present in an amount less than about 10% by weight of the alloy. The fuel may be in the form of a Pu alloy surrounded by a Zr--Hf alloy or an alloy of Pu--Zr--Hf or a combination of both. 7 figs.

Crawford, D.C.; Porter, D.L.; Hayes, S.L.; Hill, R.N.

1999-03-23T23:59:59.000Z

398

Fuel element design for the enhanced destruction of plutonium in a nuclear reactor  

DOE Patents (OSTI)

A uranium-free fuel for a fast nuclear reactor comprising an alloy of Pu, Zr and Hf, wherein Hf is present in an amount less than about 10% by weight of the alloy. The fuel may be in the form of a Pu alloy surrounded by a Zr--Hf alloy or an alloy of Pu--Zr--Hf or a combination of both.

Crawford, Douglas C. (Idaho Falls, ID); Porter, Douglas L. (Idaho Falls, ID); Hayes, Steven L. (Idaho Falls, ID); Hill, Robert N. (Bolingbrook, IL)

1999-01-01T23:59:59.000Z

399

Roadmap to an Engineering-Scale Nuclear Fuel Performance & Safety Code  

SciTech Connect

Developing new fuels and qualifying them for large-scale deployment in power reactors is a lengthy and expensive process, typically spanning a period of two decades from concept to licensing. Nuclear fuel designers serve an indispensable role in the process, at the initial exploratory phase as well as in analysis of the testing results. In recent years fuel performance capabilities based on first principles have been playing more of a role in what has traditionally been an empirically dominated process. Nonetheless, nuclear fuel behavior is based on the interaction of multiple complex phenomena, and recent evolutionary approaches are being applied more on a phenomenon-by-phenomenon basis, targeting localized problems, as opposed to a systematic approach based on a fundamental understanding of all interacting parameters. Advanced nuclear fuels are generally more complex, and less understood, than the traditional fuels used in existing reactors (ceramic UO{sub 2} with burnable poisons and other minor additives). The added challenges are primarily caused by a less complete empirical database and, in the case of recycled fuel, the inherent variability in fuel compositions. It is clear that using the traditional approach to develop and qualify fuels over the entire range of variables pertinent to the U.S. Department of Energy (DOE) Office of Nuclear Energy on a timely basis with available funds would be very challenging, if not impossible. As a result the DOE Office of Nuclear Energy has launched the Nuclear Energy Advanced Modeling and Simulation (NEAMS) approach to revolutionize fuel development. This new approach is predicated upon transferring the recent advances in computational sciences and computer technologies into the fuel development program. The effort will couple computational science with recent advances in the fundamental understanding of physical phenomena through ab initio modeling and targeted phenomenological testing to leapfrog many fuel-development activities. Realizing the full benefits of this approach will likely take some time. However, it is important that the developmental activities for modeling and simulation be tightly coupled with the experimental activities to maximize feedback effects and accelerate both the experimental and analytical elements of the program toward a common objective. The close integration of modeling and simulation and experimental activities is key to developing a useful fuel performance simulation capability, providing a validated design and analysis tool, and understanding the uncertainties within the models and design process. The efforts of this project are integrally connected to the Transmutation Fuels Campaign (TFC), which maintains as a primary objective to formulate, fabricate, and qualify a transuranic-based fuel with added minor actinides for use in future fast reactors. Additional details of the TFC scope can be found in the Transmutation Fuels Campaign Execution Plan. This project is an integral component of the TFC modeling and simulation effort, and this multiyear plan borrowed liberally from the Transmutation Fuels Campaign Modeling and Simulation Roadmap. This document provides the multiyear staged development plan to develop a continuum-level Integrated Performance and Safety Code (IPSC) to predict the behavior of the fuel and cladding during normal reactor operations and anticipated transients up to the point of clad breach.

Turner, John A [ORNL; Clarno, Kevin T [ORNL; Hansen, Glen A [ORNL

2009-09-01T23:59:59.000Z

400

The Basics of Nuclear Fusion Reactor Using Solid Pycnodeuterium as Nuclear Fuel  

Science Journals Connector (OSTI)

......Articles The Basics of Nuclear Fusion Reactor Using Solid Pycnodeuterium as...2004 241 The Basics of Nuclear Fusion Reactor Using Solid Pycnodeuterium as...2.1) The Basics of Nuclear Fusion Reactor 243 Fig. 3. Relation between......

Yoshiaki Arata; Yue Chang Zhang

2004-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

A Preliminary Evaluation of Using Fill Materials to Stabilize Used Nuclear Fuel During Storage and Transportation  

SciTech Connect

This report contains a preliminary evaluation of potential fill materials that could be used to fill void spaces in and around used nuclear fuel contained in dry storage canisters in order to stabilize the geometry and mechanical structure of the used nuclear fuel during extended storage and transportation after extended storage. Previous work is summarized, conceptual descriptions of how canisters might be filled were developed, and requirements for potential fill materials were developed. Elements of the requirements included criticality avoidance, heat transfer or thermodynamic properties, homogeneity and rheological properties, retrievability, material availability and cost, weight and radiation shielding, and operational considerations. Potential fill materials were grouped into 5 categories and their properties, advantages, disadvantages, and requirements for future testing were discussed. The categories were molten materials, which included molten metals and paraffin; particulates and beads; resins; foams; and grout. Based on this analysis, further development of fill materials to stabilize used nuclear fuel during storage and transportation is not recommended unless options such as showing that the fuel remains intact or canning of used nuclear fuel do not prove to be feasible.

Maheras, Steven J.; Best, Ralph; Ross, Steven B.; Lahti, Erik A.; Richmond, David J.

2012-08-01T23:59:59.000Z

402

Nuclear Research & Consultancy Group (NRG) develops and provides sustainable nuclear technology for energy, environment, and health. NRG offers a wide range of services to energy  

E-Print Network (OSTI)

Nuclear Research & Consultancy Group (NRG) develops and provides sustainable nuclear technology for energy, environment, and health. NRG offers a wide range of services to energy utilities, government organizations and various branches of industry - including the nuclear, financial services and medical sectors

Lindken, Ralph

403

Microsoft Word - 911168_0 NGNP Fuel Specification Basis_rel.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

8 Revision 0 ENGINEERING SERVICES FOR THE NEXT GENERATION NUCLEAR PLANT (NGNP) WITH HYDROGEN PRODUCTION Technical Basis for NGNP Fuel Performance and Quality Requirements Prepared...

404

Nuclear imaging of the fuel assembly in ignition experiments  

SciTech Connect

First results from the analysis of neutron image data collected on implosions of cryogenically layered deuterium-tritium capsules during the 2011-2012 National Ignition Campaign are reported. The data span a variety of experimental designs aimed at increasing the stagnation pressure of the central hotspot and areal density of the surrounding fuel assembly. Images of neutrons produced by deuterium–tritium fusion reactions in the hotspot are presented, as well as images of neutrons that scatter in the surrounding dense fuel assembly. The image data are compared with 1D and 2D model predictions, and consistency checked using other diagnostic data. The results indicate that the size of the fusing hotspot is consistent with the model predictions, as well as other imaging data, while the overall size of the fuel assembly, inferred from the scattered neutron images, is systematically smaller than models' prediction. Preliminary studies indicate these differences are consistent with a significant fraction (20%–25%) of the initial deuterium-tritium fuel mass outside the compact fuel assembly, due either to low mode mass asymmetry or high mode 3D mix effects at the ablator-ice interface.

Grim, G. P.; Guler, N.; Merrill, F. E.; Morgan, G. L.; Danly, C. R.; Volegov, P. L.; Wilde, C. H.; Wilson, D. C.; Batha, S.; Herrmann, H. W.; Kline, J. L.; Kyrala, G. A. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)] [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Clark, D. S.; Hinkel, D. E.; Jones, O. S.; Raman, K. S.; Izumi, N.; Fittinghoff, D. N.; Drury, O. B.; Alger, E. T. [Lawrence Livermore National Laboratory, Livermore, California 94551-0808 (United States)] [Lawrence Livermore National Laboratory, Livermore, California 94551-0808 (United States); and others

2013-05-15T23:59:59.000Z

405

LWR NUCLEAR FUEL BUNDLE DATA FOR USE IN FUEL BUNDLE HANDLING  

Office of Scientific and Technical Information (OSTI)

TIE PLATE PLENUM. ALL RODS 11-111In - 144 In ACTIVE FUEL LENGTH S - SEGMENTED SPACER CAPTURE ROD T - TIE ROD L J VlEW A - A VlEW 0 - 0 FIGURE 9. General Electric 7x7 Fuel Bundle...

406

Foreign experience on effects of extended dry storage on the integrity of spent nuclear fuel  

SciTech Connect

This report summarizes the results of a survey of foreign experience in dry storage of spent fuel from nuclear power reactors that was carried out for the US Department of Energy`s (DOE) Office of Civilian Radioactive Waste Management (OCRWM). The report reviews the mechanisms for degradation of spent fuel cladding and fuel materials in dry storage, identifies the status and plans of world-wide experience and applications, and documents the available information on the expected long-term integrity of the dry-stored spent fuel from actual foreign experience. Countries covered in this survey are: Argentina, Canada, Federal Republic of Germany (before reunification with the former East Germany), former German Democratic Republic (former East Germany), France, India, Italy, Japan, South Korea, Spain, Switzerland, United Kingdom, and the former USSR (most of these former Republics are now in the Commonwealth of Independent States [CIS]). Industrial dry storage of Magnox fuels started in 1972 in the United Kingdom; Canada began industrial dry storage of CANDU fuels in 1980. The technology for safe storage is generally considered to be developed for time periods of 30 to 100 years for LWR fuel in inert gas and for some fuels in oxidizing gases at low temperatures. Because it will probably be decades before countries will have a repository for spent fuels and high-level wastes, the plans for expanded use of dry storage have increased significantly in recent years and are expected to continue to increase in the near future.

Schneider, K.J.; Mitchell, S.J.

1992-04-01T23:59:59.000Z

407

Foreign experience on effects of extended dry storage on the integrity of spent nuclear fuel  

SciTech Connect

This report summarizes the results of a survey of foreign experience in dry storage of spent fuel from nuclear power reactors that was carried out for the US Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM). The report reviews the mechanisms for degradation of spent fuel cladding and fuel materials in dry storage, identifies the status and plans of world-wide experience and applications, and documents the available information on the expected long-term integrity of the dry-stored spent fuel from actual foreign experience. Countries covered in this survey are: Argentina, Canada, Federal Republic of Germany (before reunification with the former East Germany), former German Democratic Republic (former East Germany), France, India, Italy, Japan, South Korea, Spain, Switzerland, United Kingdom, and the former USSR (most of these former Republics are now in the Commonwealth of Independent States (CIS)). Industrial dry storage of Magnox fuels started in 1972 in the United Kingdom; Canada began industrial dry storage of CANDU fuels in 1980. The technology for safe storage is generally considered to be developed for time periods of 30 to 100 years for LWR fuel in inert gas and for some fuels in oxidizing gases at low temperatures. Because it will probably be decades before countries will have a repository for spent fuels and high-level wastes, the plans for expanded use of dry storage have increased significantly in recent years and are expected to continue to increase in the near future.

Schneider, K.J.; Mitchell, S.J.

1992-04-01T23:59:59.000Z

408

The Overlooked Back End of the Nuclear Fuel Cycle  

Science Journals Connector (OSTI)

...working toward developing a geologic repository at Yucca Mountain, Nevada, but the Obama Administration pulled the license...10 Macfarlane A. , in Uncertainty Underground: Yucca Mountain and the Nation's High-Level Nuclear Waste , Macfarlane...

Allison M. Macfarlane

2011-09-02T23:59:59.000Z

409

Russia fuels fury with scheme for importing nuclear waste  

Science Journals Connector (OSTI)

... The Minatom proposal is a guaranteed non-starter,” says Tom Cochran, director of the Nuclear Program of the Natural Resources Defense Council, a US-based environmental organization. ...

Quirin Schiermeier

2001-05-24T23:59:59.000Z

410

Nuclear-Renewable Hybrid System Economic Basis for Electricity, Fuel, and Hydrogen  

SciTech Connect

Concerns about climate change and altering the ocean chemistry are likely to limit the use of fossil fuels. That implies a transition to a low-carbon nuclear-renewable electricity grid. Historically variable electricity demand was met using fossil plants with low capital costs, high operating costs, and substantial greenhouse gas emissions. However, the most easily scalable very-low-emissions generating options, nuclear and non-dispatchable renewables (solar and wind), are capital-intensive technologies with low operating costs that should operate at full capacities to minimize costs. No combination of fully-utilized nuclear and renewables can meet the variable electricity demand. This implies large quantities of expensive excess generating capacity much of the time. In a free market this results in near-zero electricity prices at times of high nuclear renewables output and low electricity demand with electricity revenue collapse. Capital deployment efficiency—the economic benefit derived from energy systems capital investment at a societal level—strongly favors high utilization of these capital-intensive systems, especially if low-carbon nuclear renewables are to replace fossil fuels. Hybrid energy systems are one option for better utilization of these systems that consumes excess energy at times of low prices to make some useful product.The economic basis for development of hybrid energy systems is described for a low-carbon nuclear renewable world where much of the time there are massivequantities of excess energy available from the electric sector.Examples include (1) high-temperature electrolysis to generate hydrogen for non-fossil liquid fuels, direct use as a transport fuel, metal reduction, etc. and (2) biorefineries.Nuclear energy with its concentrated constant heat output may become the enabling technology for economically-viable low-carbon electricity grids because hybrid nuclear systems may provide an economic way to produce dispatachable variable electricity with economic base-load operation of the reactor.

Charles Forsberg; Steven Aumeier

2014-04-01T23:59:59.000Z

411

Fuel cycle modelling of open cycle thorium-fuelled nuclear energy systems  

Science Journals Connector (OSTI)

Abstract In this study, we have sought to determine the advantages, disadvantages, and viability of open cycle thorium–uranium-fuelled (Th–U-fuelled) nuclear energy systems. This has been done by assessing three such systems, each of which requires uranium enriched to ?20% 235U, in comparison to a reference uranium-fuelled (U-fuelled) system over various performance indicators, spanning material flows, waste composition, economics, and proliferation resistance. The values of these indicators were determined using the UK National Nuclear Laboratory’s fuel cycle modelling code ORION. This code required the results of lattice-physics calculations to model the neutronics of each nuclear energy system, and these were obtained using various nuclear reactor physics codes and burn-up routines. In summary, all three Th–U-fuelled nuclear energy systems required more separative work capacity than the equivalent benchmark U-fuelled system, with larger levelised fuel cycle costs and larger levelised cost of electricity. Although a reduction of ?6% in the required uranium ore per kWh was seen for one of the Th–U-fuelled systems compared to the reference U-fuelled system, the other two Th–U-fuelled systems required more uranium ore per kWh than the reference. Negligible advantages and disadvantages were observed for the amount and the properties of the spent nuclear fuel (SNF) generated by the systems considered. Two of the Th–U-fuelled systems showed some benefit in terms of proliferation resistance of the SNF generated. Overall, it appears that there is little merit in incorporating thorium into nuclear energy systems operating with open nuclear fuel cycles.

S.F. Ashley; B.A. Lindley; G.T. Parks; W.J. Nuttall; R. Gregg; K.W. Hesketh; U. Kannan; P.D. Krishnani; B. Singh; A. Thakur; M. Cowper; A. Talamo

2014-01-01T23:59:59.000Z

412

Evaluation of Options for Permanent Geologic Disposal of Spent NuclearFuel and High-Level Radioactive Waste  

Energy.gov (U.S. Department of Energy (DOE))

[In Support of a Comprehensive National Nuclear Fuel Cycle Strategy, Volumes I and II (Appendices)] This study provides a technical basis for informing policy decisions regarding strategies for the management and permanent disposal of spent nuclear fuel (SNF) and high-level radioactive waste (HLW) in the United States requiring geologic isolation.

413

Experience from the Short Course on Introduction to Nuclear Chemistry and Fuel Cycle Separations and Future Educational Opportunities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Short Course - Short Course - Overview & Lessons Learned David Kosson, Vanderbilt & CRESP Introduction to Nuclear Chemistry and Fuel Cycle Separations December 16-18, 2008 Vanderbilt University Vanderbilt University Dept. of Civil and Environmental Engineering safety performance cleanup closure M E Environmental Management Environmental Management 1 Course Objective To provide an introduction to the chemistry and p y separations processes of importance to entire nuclear fuel cycle. Targeted Audience: * Professionals in management, oversight and regulation of nuclear processes and facilities. * Graduate students in engineering and sciences planning a career focused on nuclear processes. focused on nuclear processes. * As an introduction for professionals that will be engaged in nuclear

414

Nuclear breeder reactor fuel element with silicon carbide getter  

DOE Patents (OSTI)

An improved cesium getter 28 is provided in a breeder reactor fuel element or pin in the form of an extended surface area, low density element formed in one embodiment as a helically wound foil 30 located with silicon carbide, and located at the upper end of the fertile material upper blanket 20.

Christiansen, David W. (Kennewick, WA); Karnesky, Richard A. (Richland, WA)

1987-01-01T23:59:59.000Z

415

A REVIEW OF LIGHT-WATER REACTOR SAFETY STUDIES. VOLUME 3 OF THE FINAL REPORT ON HEALTH AND SAFETY IMPACTS OF NUCLEAR, GEOTHERMAL, AND FOSSIL-FUEL ELECTRIC GENERATION IN CALIFORNIA  

E-Print Network (OSTI)

Health and Safety Impacts of Nuclear, Geothermal, and Fossil- Fuel3 of HEALTH AND SAFETY IMPACTS OF FOSSIL-FUEL NUCLEAR,HEALTH AND SAFETY IMPACTS OF NUCLEAR, GEOTHERMAL, AND FOSSIL-FUEL

Nero, A.V.

2010-01-01T23:59:59.000Z

416

Chemical Effects at the Reaction Front in Corroding Spent Nuclear Fuel  

SciTech Connect

Performance assessment models of the U. S. repository at Yucca Mountain, Nevada suggest that neptunium from spent nuclear fuel is a potentially important dose contributor. A scientific understanding of how the UO{sub 2} matrix of spent nuclear fuel impacts the oxidative dissolution and reductive precipitation of Np is needed to predict the behavior of Np at the fuel surface during aqueous corrosion. Neptunium would most likely be transported as aqueous Np(V) species, but for this to occur it must first be oxidized from the Np(IV) state found within the parent spent nuclear fuel. In this paper we present synchrotron X-ray absorption spectroscopy and microscopy findings that illuminate the resultant local chemistry of neptunium and plutonium within uranium oxide spent nuclear fuel before and after corrosive alteration in an air-saturated aqueous environment. We find the Pu and Np in unaltered spent fuel to have a +4 oxidation state and an environment consistent with solid-solution in the UO{sub 2} matrix. During corrosion in an air-saturated aqueous environment, the uranium matrix is converted to uranyl (UO{sub 2}{sup 2+}) mineral assemblage that is depleted in Np and Pu relative to the parent fuel. The transition from U(IV) in the fuel to a fully U(VI) character across the corrosion front is not sharp, but occurs over a transition zone of {approx} 50 micrometers. We find evidence of a thin ({approx} 20 micrometer) layer that is enriched in Pu and Np within a predominantly U(IV) environment on the fuel side of the transition zone. These experimental observations are consistent with available data for the standard reduction potentials for NpO{sub 2}{sup +}/Np{sup 4+} and UO{sub 2}{sup 2+}/U{sup 4+} couples, which indicate that Np(IV) may not be effectively oxidized to Np(V) at the corrosion potential of uranium dioxide spent nuclear fuel in air-saturated aqueous solutions. (authors)

Fortner, Jeffrey A.; Kropf, A. Jeremy; Jerden, James L.; Cunnane, James C. [Chemical Engineering, Argonne National Laboratory, CMT/205, 9700 S. Cass Avenue, Argonne, IL, 60439 (United States)

2007-07-01T23:59:59.000Z

417

Performance testing and Bayesian Reliability Analysis of small diameter, high power electric heaters for the simulation of nuclear fuel rod temperatures.  

E-Print Network (OSTI)

??The conversion of plutonium from a nuclear weapon to nuclear reactor fuel requires an evaluation of the residual gallium as a potential corrosive material within… (more)

O'Kelly, David Sean

2012-01-01T23:59:59.000Z

418

A Technical Review of Non-Destructive Assay Research for the Characterization of Spent Nuclear Fuel Assemblies Being Conducted Under the US DOE NGSI - 11544  

E-Print Network (OSTI)

NA-24), National Nuclear Security Administration, U.S.nuclear energy together with the emergence of alternative fuel cycles. Introduction Energy security

Croft, S.

2012-01-01T23:59:59.000Z

419

Spent nuclear fuel characterization for a bounding reference assembly for the receiving basin for off-site fuel  

SciTech Connect

A basis for interim operation 1 (BIO) for the receiving basin for off-site fuel (RBOF) facility at the U.S. Department of Energy`s (DOE) Savannah River site nuclear materials production complex has been developed in accordance to draft DOE-STD-0019-93 (Ref. 2). The latter document requires a hazard categorization per DOE-STD-1027-92 (Ref. 3) for the safety analysis portion of the BIO. This classification places the facility in one of three categories as defined in DOE 5480.23 (Ref. 4) per the total radioactivity, which can be released during an accident. The diversity of spent nuclear fuels stored in the RBOF made an exacting assessment of the total radioactive inventory virtually impossible. This restriction led to a conservative calculation based on the concept of a hypothetical bounding reference fuel assembly (RFA) integrated over the total capacity of the facility. The RFA is derived from a systematic ranking of the real assemblies (current and expected) according to a maximum burnup criterion. The indicated scheme is not only simple but precluded a potential delay in the completion of the BIO.

Kahook, S.D.; Garrett, R.L.; Canas, L.R. [Westinghouse Savannah River Company, Aiken, SC (United States)] [and others

1995-12-31T23:59:59.000Z

420

Environmental Assessment of Urgent-Relief Acceptance of Foreign Research Reactor Spent Nuclear Fuel  

SciTech Connect

The Department of Energy has completed the Environmental Assessment (EA) of Urgent-Relief Acceptance of Foreign Research Reactor Spent Nuclear Fuel and issued a Finding of No Significant Impact (FONSI) for the proposed action. The EA and FONSI are enclosed for your information. The Department has decided to accept a limited number of spent nuclear fuel elements (409 elements) containing uranium that was enriched in the United States from eight research reactors in Austria, Denmark, Germany, Greece, the Netherlands, Sweden, and Switzerland. This action is necessary to maintain the viability of a major US nuclear weapons nonproliferation program to limit or eliminate the use of highly enriched uranium in civil programs. The purpose of the EA is to maintain the cooperation of the foreign research reactor operators with the nonproliferation program while a more extensive Environmental Impact Statement (EIS) is prepared on a proposed broader policy involving the acceptance of up to 15,000 foreign research reactor spent fuel elements over a 10 to 15 year period. Based on an evaluation of transport by commercial container liner or chartered vessel, five eastern seaboard ports, and truck and train modes of transporting the spent fuel overland to the Savannah River Sits, the Department has concluded that no significant impact would result from any combination of port and made of transport. In addition, no significant impacts were found from interim storage of spent fuel at the Savannah River Site.

Not Available

1994-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Microstructural Examination to Aid in Understanding Friction Bonding Fabrication Technique for Monolithic Nuclear Fuel  

SciTech Connect

Monolithic nuclear fuel is currently being developed for use in research reactors, and friction bonding (FB) is a technique being developed to help in this fuel’s fabrication. Since both FB and monolithic fuel are new concepts, research is needed to understand the impact of varying FB fabrication parameters on fuel plate characteristics. This thesis research provides insight into the FB process and its application to the monolithic fuel design by recognizing and understanding the microstructural effects of varying fabrication parameters (a) FB tool load, and (b) FB tool face alloy. These two fabrication parameters help drive material temperature during fabrication, and thus the material properties, bond strength, and possible formation of interface reaction layers. This study analyzed temperatures and tool loads measured during those FB processes and examined microstructural characteristics of materials and bonds in samples taken from the resulting fuel plates. This study shows that higher tool load increases aluminum plasticization and forging during FB, and that the tool face alloy helps determine the tool’s heat extraction efficacy. The study concludes that successful aluminum bonds can be attained in fuel plates using a wide range of FB tool loads. The range of tool loads yielding successful uranium-aluminum bonding was not established, but it was demonstrated that such bonding can be attained with FB tool load of 48,900 N (11,000 lbf) when using a FB tool faced with a tungsten alloy. This tool successfully performed FB, and with better results than tools faced with other materials. Results of this study correlate well with results reported for similar aluminum bonding techniques. This study’s results also provide support and validation for other nuclear fuel development studies and conclusions. Recommendations are offered for further research.

Karen L. Shropshire

2008-04-01T23:59:59.000Z

422

Prospects for and problems of using light-water supercritical-pressure coolant in nuclear reactors in order to increase the efficiency of the nuclear fuel cycle  

SciTech Connect

Trends in the development of the power sector of the Russian and world power industries both at present time and in the near future are analyzed. Trends in the rise of prices for reserves of fossil and nuclear fuels used for electricity production are compared. An analysis of the competitiveness of electricity production at nuclear power plants as compared to the competitiveness of electricity produced at coal-fired and natural-gas-fired thermal power plants is performed. The efficiency of the open nuclear fuel cycle and various versions of the closed nuclear fuel cycle is discussed. The requirements on light-water reactors under the scenario of dynamic development of the nuclear power industry in Russia are determined. Results of analyzing the efficiency of fuel utilization for various versions of vessel-type light-water reactors with supercritical coolant are given. Advantages and problems of reactors with supercritical-pressure water are listed.

Alekseev, P. N.; Semchenkov, Yu. M.; Sedov, A. A., E-mail: sedov@dhtp.kial.ru; Subbotin, S. A.; Chibinyaev, A. V. [Russian Research Centre Kurchatov Institute (Russian Federation)

2011-12-15T23:59:59.000Z

423

Measures of the Environmental Footprint of the Front End of the Nuclear Fuel Cycle  

SciTech Connect

Previous estimates of environmental impacts associated with the front end of the nuclear fuel cycle have focused primarily on energy consumption and CO2 emissions. Results have varied widely. Section 2 of this report provides a summary of historical estimates. This study revises existing empirical correlations and their underlying assumptions to fit to a more complete set of existing data. This study also addresses land transformation, water withdrawals, and occupational and public health impacts associated with the processes of the front end of the once-through nuclear fuel cycle. These processes include uranium mining, milling, refining, conversion, enrichment, and fuel fabrication. Metrics are developed to allow environmental impacts to be summed across the full set of front end processes, including transportation and disposition of the resulting depleted uranium.

Brett Carlsen; Emily Tavrides; Erich Schneider

2010-08-01T23:59:59.000Z

424

Dry Storage Demonstration for High-Burnup Spent Nuclear Fuel-Feasibility Study  

SciTech Connect

Initially, casks for dry storage of spent fuel were licensed for assembly-average burnup of about 35 GWd/MTU. Over the last two decades, the discharge burnup of fuel has increased steadily and now exceeds 45 GWd/MTU. With spent fuel burnups approaching the licensing limits (peak rod burnup of 62 GWd/MTU for pressurized water reactor fuel) and some lead test assemblies being burned beyond this limit, a need for a confirmatory dry storage demonstration program was first identified after the publication in May 1999 of the U.S. Nuclear Regulatory Commissions (NRC) Interim Staff Guidance 11 (ISG-11). With the publication in July 2002 of the second revision of ISG-11, the desirability for such a program further increased to obtain confirmatory data about the potential changes in cladding mechanical properties induced by dry storage, which would have implications to the transportation, handling, and disposal of high-burnup spent fuel. While dry storage licenses have kept pace with reactor discharge burnups, transportation licenses have not and are considered on a case by case basis. Therefore, this feasibility study was performed to examine the options available for conducting a confirmatory experimental program supporting the dry storage, transportation, and disposal of spent nuclear fuel with burnups well in excess of 45 GWd/MTU.

McKinnon, Mikal A. (BATTELLE (PACIFIC NW LAB)); Cunningham, Mitchel E. (BATTELLE (PACIFIC NW LAB))

2003-09-09T23:59:59.000Z

425

The Chemistry os Spent Nuclear Fuel From X-Ray Absorption Spectroscopy  

SciTech Connect

Present and future nuclear fuel cycles will require an understanding of the complex chemistry of trace fission products and transuranium actinides in spent nuclear fuel (SNF). Because of the unique analytical challenges presented by SNF to the materials scientist, many of its fundamental physical and chemical properties remain poorly understood, especially on the microscopic scale. Such an understanding of the chemical states of radionuclides in SNF would benefit development of technologies for fuel monitoring, fuel performance improvement and modeling, fuel reprocessing, and spent fuel storage and disposal. We have recently demonstrated the use of synchrotron x-ray absorption spectroscopy (XAS) to examine crystal chemical properties of actinides and fission products in extracted specimens of SNF. Information obtained includes oxidation state, chemical bond coordination, and quantitative elemental concentration and distribution. We have also used XAS in a scanning mode to obtain x-ray spectral micrographs with resolution approaching 1 micron. A brief overview of the technique will be presented, along with findings on uranium, plutonium, neptunium, technetium, and molybdenum in commercial PWR SNF specimens.

F.A. Fortner; A.J. Kropf; J.C. Cunnane

2006-09-21T23:59:59.000Z

426

DOE/EIS-0218-SA-3: Supplement Analysis for the Foreign Research Reactor Spent Nuclear Fuel Acceptance Program (November 2004)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SUPPLEMENT ANALYSIS FOR THE FOREIGN SUPPLEMENT ANALYSIS FOR THE FOREIGN RESEARCH REACTOR SPENT NUCLEAR FUEL ACCEPTANCE PROGRAM NOVEMBER 2004 DOE/EIS-0218-SA-3 U.S. Department of Energy National Nuclear Security Administration Washington, DC Final Supplement Analysis for the Foreign Research Reactor Spent Nuclear Fuel Acceptance Program Final i TABLE OF CONTENTS Page 1. Introduction.............................................................................................................................................. 1 2. Background .............................................................................................................................................. 1 3. The Proposed Action ...............................................................................................................................

427

THE NUCLEAR FUEL CYCLE versus THE CARBON CYCLE  

Science Journals Connector (OSTI)

...license for the disposal of SNF and...at the Yucca Mountain site in Nevada...decades on the Yucca Mountain site in order...the initial funding that allowed...reprocessing and disposal of nuclear...repository at Yucca Mountain. One approach...

Rodney C. Ewing

428

Spent Nuclear Fuel (SNF) Project Acceptance Criteria for Light Water Reactor Spent Fuel Storage System [OCRWM PER REV2  

SciTech Connect

As part of the decommissioning of the 324 Building Radiochemical Engineering Cells there is a need to remove commercial Light Water Reactor (LWR) spent nuclear fuel (SNF) presently stored in these hot cells. To enable fuel removal from the hot cells, the commercial LWR SNF will be packaged and shipped to the 200 Area Interim Storage Area (ISA) in a manner that satisfies site requirements for SNF interim storage. This document identifies the criteria that the 324 Building Radiochemical Engineering Cell Clean-out Project must satisfy for acceptance of the LWR SNF by the SNF Project at the 200 Area ISA. In addition to the acceptance criteria identified herein, acceptance is contingent on adherence to applicable Project Hanford Management Contract requirements and procedures in place at the time of work execution.

JOHNSON, D.M.

2000-12-20T23:59:59.000Z

429

Nuclear Resonance Fluorescence to Measure Plutonium Mass in Spent Nuclear Fuel  

E-Print Network (OSTI)

Level Scheme Library Depleted Uranium Evaluated Nuclear Datafuel and the 238 U in depleted uranium (DU) was used as a

Ludewigt, Bernhard A

2011-01-01T23:59:59.000Z

430

Enterprise SRS: leveraging ongoing operations to advance nuclear fuel cycles research and development programs  

SciTech Connect

The Savannah River Site (SRS) is re-purposing its vast array of assets (including H Canyon - a nuclear chemical separation plant) to solve issues regarding advanced nuclear fuel cycle technologies, nuclear materials processing, packaging, storage and disposition. The vehicle for this transformation is Enterprise SRS which presents a new, radical view of SRS as a united endeavor for 'all things nuclear' as opposed to a group of distinct and separate entities with individual missions and organizations. Key among the Enterprise SRS strategic initiatives is the integration of research into SRS facilities but also in other facilities in conjunction with on-going missions to provide researchers from other national laboratories, academic institutions, and commercial entities the opportunity to demonstrate their technologies in a relevant environment and scale prior to deployment. To manage that integration of research demonstrations into site facilities, a center for applied nuclear materials processing and engineering research has been established in SRS.

Murray, A.M.; Marra, J.E.; Wilmarth, W.R. [Savannah River National Laboratory, Aiken, SC 29808 (United States); McGuire, P.W.; Wheeler, V.B. [Department of Energy-Savannah River Operations Office, Aiken SC 29808 (United States)

2013-07-01T23:59:59.000Z

431

Safeguarding Nuclear Fuel Processing | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

Safeguarding Nuclear Safeguarding Nuclear Fuel Processing Laboratory Policy and Evaluation (LPE) LPE Home Staff M&O Contracts SC Laboratory Appraisal Process Laboratory Planning Process Work for Others in the Office of Science Laboratory Directed Research and Development (LDRD) DOE's Philosophy on LDRD Frequently Asked Questions Success Stories Brochures Additional Information LDRD Program Contacts Technology Transfer DOE National Laboratories Contact Information Laboratory Policy and Evaluation U.S. Department of Energy SC-32/Forrestal Building 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5447 F: (202) 586-3119 Success Stories Safeguarding Nuclear Fuel Processing Print Text Size: A A A RSS Feeds FeedbackShare Page Idaho National Laboratory Develops International Nonproliferation

432

Nuclear Dynamics Consequence Analysis (NDCA) for the Disposal of Spent Nuclear Fuel in an Underground Geologic Repository - Volume 3: Appendices  

SciTech Connect

The United States Department of Energy Office of Environmental Management's (DOE/EM's) National Spent Nuclear Fuel Program (NSNFP), through a collaboration between Sandia National Laboratories (SNL) and Idaho National Engineering and Environmental Laboratory (INEEL), is conducting a systematic Nuclear Dynamics Consequence Analysis (NDCA) of the disposal of SNFs in an underground geologic repository sited in unsaturated tuff. This analysis is intended to provide interim guidance to the DOE for the management of the SNF while they prepare for final compliance evaluation. This report presents results from a Nuclear Dynamics Consequence Analysis (NDCA) that examined the potential consequences and risks of criticality during the long-term disposal of spent nuclear fuel owned by DOE-EM. This analysis investigated the potential of post-closure criticality, the consequences of a criticality excursion, and the probability frequency for post-closure criticality. The results of the NDCA are intended to provide the DOE-EM with a technical basis for measuring risk which can be used for screening arguments to eliminate post-closure criticality FEPs (features, events and processes) from consideration in the compliance assessment because of either low probability or low consequences. This report is composed of an executive summary (Volume 1), the methodology and results of the NDCA (Volume 2), and the applicable appendices (Volume 3).

Taylor, L.L.; Wilson, J.R. (INEEL); Sanchez, L.C.; Aguilar, R.; Trellue, H.R.; Cochrane, K. (SNL); Rath, J.S. (New Mexico Engineering Research Institute)

1998-10-01T23:59:59.000Z

433

SPENT NUCLEAR FUEL STORAGE BASIN WATER CHEMISTRY: ELECTROCHEMICAL EVALUATION OF ALUMINUM CORROSION  

SciTech Connect

The factors affecting the optimal water chemistry of the Savannah River Site spent fuel storage basin must be determines in order to optimize facility efficiency, minimize fuel corrosion, and reduce overall environmental impact from long term spent nuclear fuel storage at the Savannah River Site. The Savannah River National Laboratory is using statistically designed experiments to study the effects of NO{sub 3}{sup -}, SO{sub 4}{sup 2-}, and Cl{sup -} concentrations on alloys commonly used not only as fuel cladding, but also as rack construction materials The results of cyclic polarization pitting and corrosion experiments on samples of Al 6061 and 1100 alloys will be used to construct a predictive model of the basin corrosion and its dependence on the species in the basin. The basin chemistry model and corrosion will be discussed in terms of optimized water chemistry envelope and minimization of cladding corrosion.

Hathcock, D

2007-10-30T23:59:59.000Z

434

Separation of Nuclear Fuel Surrogates from Silicon Carbide Inert Matrix  

SciTech Connect

The objective of this project has been to identify a process for separating transuranic species from silicon carbide (SiC). Silicon carbide has become one of the prime candidates for the matrix in inert matrix fuels, (IMF) being designed to reduce plutonium inventories and the long half-lives actinides through transmutation since complete reaction is not practical it become necessary to separate the non-transmuted materials from the silicon carbide matrix for ultimate reprocessing. This work reports a method for that required process.l

Dr. Ronald Baney

2008-12-15T23:59:59.000Z

435

54 USDA Forest Service RMRS-P-53CD. 2008. Fire and Fuels Research at Fort Valley  

E-Print Network (OSTI)

54 USDA Forest Service RMRS-P-53CD. 2008. Fire and Fuels Research at Fort Valley and Long Valley and Long Valley Experimental Forests in the mid 1970s. The U.S. Forest Service and other agencies, Pacific Southwest Research Station, Riverside, CA Abstract--Fire research began on the Fort Valley

436

Energy Frontier Research Center, Center for Materials Science of Nuclear Fuels  

SciTech Connect

The Office of Science, Basic Energy Sciences, has funded the INL as one of the Energy Frontier Research Centers in the area of material science of nuclear fuels. This document is the required annual report to the Office of Science that outlines the accomplishments for the period of May 2010 through April 2011. The aim of the Center for Material Science of Nuclear Fuels (CMSNF) is to establish the foundation for predictive understanding of the effects of irradiation-induced defects on thermal transport in oxide nuclear fuels. The science driver of the center’s investigation is to understand how complex defect and microstructures affect phonon mediated thermal transport in UO2, and achieve this understanding for the particular case of irradiation-induced defects and microstructures. The center’s research thus includes modeling and measurement of thermal transport in oxide fuels with different levels of impurities, lattice disorder and irradiation-induced microstructure, as well as theoretical and experimental investigation of the evolution of disorder, stoichiometry and microstructure in nuclear fuel under irradiation. With the premise that thermal transport in irradiated UO2 is a phonon-mediated energy transport process in a crystalline material with defects and microstructure, a step-by-step approach will be utilized to understand the effects of types of defects and microstructures on the collective phonon dynamics in irradiated UO2. Our efforts under the thermal transport thrust involved both measurement of diffusive phonon transport (an approach that integrates over the entire phonon spectrum) and spectroscopic measurements of phonon attenuation/lifetime and phonon dispersion. Our distinct experimental efforts dovetail with our modeling effort involving atomistic simulation of phonon transport and prediction of lattice thermal conductivity using the Boltzmann transport framework.

Todd R. Allen, Director

2011-04-01T23:59:59.000Z

437

Nuclear processes in magnetic fusion reactors with polarized fuel  

E-Print Network (OSTI)

We consider the processes $d +d \\to n +{^3He}$, $d +{^3He} \\to p +{^4He}$, $d +{^3H} \\to n +{^4He}$, ${^3He} +{^3He}\\to p+p +{^4He}$, ${^3H} +{^3He}\\to d +{^4He}$, with particular attention for applications in fusion reactors. After a model independent parametrization of the spin structure of the matrix elements for these processes at thermal colliding energies, in terms of partial amplitudes, we study polarization phenomena in the framework of a formalism of helicity amplitudes. The strong angular dependence of the final nuclei and of the polarization observables on the polarizations of the fuel components can be helpful in the design of the reactor shielding, blanket arrangement etc..We analyze also the angular dependence of the neutron polarization for the processes $\\vec d +\\vec d \\to n +{^3He}$ and $\\vec d +\\vec {^3H} \\to n +{^4He}$.

Michail P. Rekalo; Egle Tomasi-Gustafsson

2000-10-16T23:59:59.000Z

438

NUCLEAR MATERIAL ATTRACTIVENESS: AN ASSESSMENT OF MATERIAL ASSOCIATED WITH A CLOSED FUEL CYCLE  

SciTech Connect

This paper examines the attractiveness of materials mixtures containing special nuclear materials (SNM) associated with the various processing steps required for a closed fuel cycle. This paper combines the results from earlier studies that examined the attractiveness of SNM associated with the processing of spent light water reactor (LWR) fuel by various reprocessing schemes and the recycle of plutonium as a mixed oxide (MOX) fuel in LWR with new results for the final, repeated burning of SNM in fast-spectrum reactors: fast reactors and accelerator driven systems (ADS). The results of this paper suggest that all reprocessing products evaluated so far need to be rigorously safeguarded and provided moderate to high levels of physical protection. These studies were performed at the request of the United States Department of Energy (DOE), and are based on the calculation of "attractiveness levels" that has been couched in terms chosen for consistency with those normally used for nuclear materials in DOE nuclear facilities. The methodology and key findings will be presented. Additionally, how these attractiveness levels relate to proliferation resistance (e.g. by increasing impediments to the diversion, theft, or undeclared production of SNM for the purpose of acquiring a nuclear weapon), and how they could be used to help inform policy makers, will be discussed.

Bathke, C. G.; Ebbinghaus, B.; Sleaford, Brad W.; Wallace, R. K.; Collins, Brian A.; Hase, Kevin R.; Robel, Martin; Jarvinen, G. D.; Bradley, Keith S.; Ireland, J. R.; Johnson, M. W.; Prichard, Andrew W.; Smith, Brian W.

2010-06-11T23:59:59.000Z

439

U.S. Department of Energy Accident Resistant SiC Clad Nuclear Fuel Development  

SciTech Connect

A significant effort is being placed on silicon carbide ceramic matrix composite (SiC CMC) nuclear fuel cladding by Light Water Reactor Sustainability (LWRS) Advanced Light Water Reactor Nuclear Fuels Pathway. The intent of this work is to invest in a high-risk, high-reward technology that can be introduced in a relatively short time. The LWRS goal is to demonstrate successful advanced fuels technology that suitable for commercial development to support nuclear relicensing. Ceramic matrix composites are an established non-nuclear technology that utilizes ceramic fibers embedded in a ceramic matrix. A thin interfacial layer between the fibers and the matrix allows for ductile behavior. The SiC CMC has relatively high strength at high reactor accident temperatures when compared to metallic cladding. SiC also has a very low chemical reactivity and doesn't react exothermically with the reactor cooling water. The radiation behavior of SiC has also been studied extensively as structural fusion system components. The SiC CMC technology is in the early stages of development and will need to mature before confidence in the developed designs can created. The advanced SiC CMC materials do offer the potential for greatly improved safety because of their high temperature strength, chemical stability and reduced hydrogen generation.

George W. Griffith

2011-10-01T23:59:59.000Z

440

Grouped actinide separation in advanced nuclear fuel cycles  

SciTech Connect

Aiming at cleaner waste streams (containing only the short-lived fission products) a partitioning and transmutation (P-T) scheme can significantly reduce the quantities of long-lived radionuclides consigned to waste. Many issues and options are being discussed and studied at present in view of selecting the optimal route. The choice is between individual treatment of the relevant elements and a grouped treatment of all actinides together. In the European Collaborative Project ACSEPT (Actinide recycling by Separation and Transmutation), grouped separation options derived from an aqueous extraction or from a dry pyroprocessing route were extensively investigated. Successful demonstration tests for both systems have been carried out in the frame of this project. The aqueous process called GANEX (Grouped Actinide Extraction) is composed of 2 cycles, a first one to recover the major part of U followed by a co-extraction of Np, Pu, Am, and Cm altogether. The pyro-reprocessing primarily applicable to metallic fuels such as the U-Pu-Zr alloy originally developed by the Argonne National Laboratory (US) in the mid 1980s, has also been applied to the METAPHIX fuels containing up to 5% of minor actinides and 5% of lanthanides (e.g. U{sub 60}Pu{sub 20}-Zr{sub 10}Am{sub 2}Nd{sub 3.5}Y{sub 0.5}Ce{sub 0.5}Gd{sub 0.5}). A grouped actinide separation has been successfully carried out by electrorefining on solid Al cathodes. At present the recovery of the actinides from the alloy formed with Al upon electrodeposition is under investigation, because an efficient P-T cycle requires multiple re-fabrication and re-irradiation. (authors)

Glatz, J.P.; Malmbeck, R.; Ougier, M.; Soucek, P. [Joint Research Center - Institute for Transuranium Elements, P.O. Box 2340, D-76125 Karlsruhe (Germany); Murakamin, T.; Tsukada, T.; Koyama, T. [Central Research Institute of Electric Power Industry (CRIEPI), Komaeshi, Tokyo 201-8511 (Japan)

2013-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "nuclear fuel services" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Concept of development of nuclear power based on LMFBR operation in open nuclear fuel cycle  

SciTech Connect

The preliminary assessments performed show that it is reasonable to investigate in the future the possibilities of FBR efficient operation with the open NFC. To improve its safety it is expedient to use the lead-bismuth alloy as a coolant. In order to operate with depleted uranium make-up it is necessary to meet a number of requirements providing the reactor criticality due to plutonium build-up and BR > 1. These requirements are as follows: a large core (20--25 m{sup 3}); a high fuel volume fraction (> 60%); utilization of dense metallic fuel; a high fuel burn-up--at a level of 20% of h.a. Making use of these reactors should allow the NP fuel base to be extended more than 10 times without making NFC closed. It provides improving NP safety during a sufficiently long stage of its development.

Toshinsky, G.I. [Inst. of Physics and Power Engineering, Obninsk (Russian Federation)

1996-08-01T23:59:59.000Z

442

Environmental Statements, Availability, Etc., Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8679 8679 Thursday June 1, 1995 Part III Department of Energy Environmental Statements, Availability, Etc.; Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs: Notice 28680 Federal Register / Vol. 60, No. 105 / Thursday, June 1, 1995 / Notices DEPARTMENT OF ENERGY Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs AGENCY: Department of Energy. ACTION: Record of decision. SUMMARY: The Department of Energy has issued a Record of Decision on Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs. The Record of Decision includes a Department-wide decision to

443

Spent Nuclear Fuel Project technical baseline document. Fiscal year 1995: Volume 1, Baseline description  

SciTech Connect

This document is a revision to WHC-SD-SNF-SD-002, and is issued to support the individual projects that make up the Spent Nuclear Fuel Project in the lower-tier functions, requirements, interfaces, and technical baseline items. It presents results of engineering analyses since Sept. 1994. The mission of the SNFP on the Hanford site is to provide safety, economic, environmentally sound management of Hanford SNF in a manner that stages it to final disposition. This particularly involves K Basin fuel, although other SNF is involved also.

Womack, J.C. [Westinghouse Hanford Co., Richland, WA (United States); Cramond, R. [TRW (United States); Paedon, R.J. [SAIC (United States)] [and others

1995-03-13T23:59:59.000Z