Powered by Deep Web Technologies
Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Nucl. Phys. B 628  

E-Print Network [OSTI]

H. Saleur, B. Wehefritz-Kaufmann / Nuclear Physics B 628 [FS] (2002) 407–441. Remarkably, the chief non-perturbative method, the integrable approach, has ...

2002-03-29T23:59:59.000Z

2

Nucl. Tracks Radiat. Meas., Vol. 14, Nos 1/2, pp. 101-104, 1988 Int. J. Radiat. Appl. Instrum., Part D  

E-Print Network [OSTI]

-induc~l thermoluminescence (TL) of mica of the muscovite type KAI2(AISi30j0)(OH)2was investigated. Two main glow peaks were- luminescent mineral. Indeed, little has been published so far on the thermoluminescence (TL) of mica despite the possible dating applications which will be mentioned below. Nishita et al. (1974) investigated natural TL

Chen, Reuven

3

Automated suppression of errors in LTP-II slope measurements with x-ray optics  

E-Print Network [OSTI]

precise reflective X-ray optics,” Nucl. Instrum. and Methods70 (2001). [2] P. Z. Takacs, “X- ray optics metrology,” in [Handbook of Optics], 3rd ed. , Vol. V, M. Bass, Ed. ,

Ali, Zulfiqar

2012-01-01T23:59:59.000Z

4

IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 52 (2012) 013005 (11pp) doi:10.1088/0029-5515/52/1/013005  

E-Print Network [OSTI]

#12;IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 52 (2012-vaguelette decomposition. After validation of the new method using an academic test case and numerical data obtained, but the associated vessel erosion also impairs the awaited viability of long lasting discharges. It is thus

Farge, Marie

5

Response to 'Comment on 'Elastic incoherent neutron scattering operating by varying instrumental energy resolution: Principle, simulations, and experiments of the resolution elastic neutron scattering (RENS)'' [Rev. Sci. Instrum. 83, 107101 (2012)  

SciTech Connect (OSTI)

Recently [S. Magazu et al., Rev. Sci. Instrum. 82, 105115 (2011)] we have proposed a new method for characterizing, by neutron scattering, the dynamical properties of complex material systems, such as, the ones of interest in the biophysical field. This approach called Resolution Elastic Neutron Scattering, in short RENS, is based on the detection of the elastically scattered neutron intensity as a function of the instrumental energy resolution. By experimental, theoretical, and numerical findings, we have pointed out that an inflection point occurs in the elastic intensity when the system relaxation time approaches the instrumental energy resolution time. This approach, differently from quasi-elastic neutron scattering (QENS), gives the chance to evaluate the system relaxation times without using pre-defined models that can be wrong and/or misleading. Here, we reply to a Comment on the above-mentioned main paper in which Wuttke proposes a different approach to evaluate the above-mentioned inflection point; on this regard, it should be noticed that the existence of the inflection point, which is the main topic of our work, is not questioned and that the approach proposed by Wuttke in the Comment, although valid for a class of dynamical processes, is not applicable when different and distinct processes occur simultaneously at different time scale.

Magazu, Salvatore; Migliardo, Federica; Benedetto, Antonio [Dipartimento di Fisica, Universita di Messina, C.da Papardo n Degree-Sign 31, P.O. Box 55, Vill. S. Agata 98166 Messina (Italy)

2012-10-15T23:59:59.000Z

6

This manuscript has been published as: S Bernard, J Frisn, KL Spalding. A mathematical model for the interpretation of nuclear bomb test derived 14C incorporation in biological systems (2010) Nucl. Instr.  

E-Print Network [OSTI]

for the interpretation of nuclear bomb test derived 14C incorporation in biological systems (2010) Nucl. Instr. and Meth for the interpretation of nuclear bomb test derived 14 C incorporation in biological systems Samuel Bernard1 , Jonas nuclear bomb testing during the cold war (1955-1963). For slowly renewing tissues, this method provides

Boyer, Edmond

7

Ann. Nucl. Energy,Vol. 21, No. 7, pp. 423~432, 1994 Copyright 1994Elsevier Science Ltd  

E-Print Network [OSTI]

Pergamon Ann. Nucl. Energy,Vol. 21, No. 7, pp. 423~432, 1994 Copyright © 1994Elsevier Science Ltd Engineering Department, University of New Mexico, Albu- querque, NM 87131, USA. 423 #12;424 I. PAZSITet al

Pázsit, Imre

8

arXiv:nucl-ex/0002003v225Feb2000 Phenomenology of the deuteron electromagnetic form factors  

E-Print Network [OSTI]

arXiv:nucl-ex/0002003v225Feb2000 Phenomenology of the deuteron electromagnetic form factors D. The parameterizations allow a phenomenological characterization of the deuteron electromagnetic struc- ture. They can

Thomas Jefferson National Accelerator Facility

9

Improvement of the New NO Detection Method Using  

E-Print Network [OSTI]

by impurities in the ionization cell by using a TOF mass spectrometer. The obtained sensitivity of this method. Sci. Instrum. 1997, 68, 2891). This method uses a frequency-doubled pulsed-dye laser operating near developed a new detection method for NO by using a pulsed-dye laser operating at near 226 nm to photoionize

Lee, Shan-Hu

10

ALEXANDER A. GRILLO Research Physicist and Adjunct Professor  

E-Print Network [OSTI]

of Engineering, Magnesys 1985 ­ 1988 Device Engineering Manager, Magnesys 1984 ­ 1985 Manager of Statistical of Quantum Electronics 49, 1045 (2013). 2. Radiation Hardness Evaluation of a 130 nm SiGe BiCMOS technology. Konoenko, A.A. Grillo, S. Díez, Nucl. Instrum. Methods A724, 41 (2013). 4. A.A. Grillo "Electronics

California at Santa Cruz, University of

11

IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 49 (2009) 104010 (12pp) doi:10.1088/0029-5515/49/10/104010  

E-Print Network [OSTI]

IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 49 (2009) 104010. Zwingmann CEA, IRFM, F-13108 St Paul-lez-Durance, France 1 Associazione EURATOM-ENEA sulla Fusione, C;Nucl. Fusion 49 (2009) 104010 G. Giruzzi et al 9 LJAD, U.M.R. C.N.R.S. No 6621, Universit´e de Nice

�cole Normale Supérieure

12

Eur J Nucl Med Mol Imaging . Author manuscript The age of reason for FDG PET image-derived indices  

E-Print Network [OSTI]

Eur J Nucl Med Mol Imaging . Author manuscript Page /1 3 The age of reason for FDG PET image Author Keywords image derived parameters ; 18F-FDG-PET ; prediction ; prognosis ; therapy response The clinical use of Positron Emission Tomography (PET) imaging using the 2-deoxy-2-(18F

Paris-Sud XI, Université de

13

E-Print Network 3.0 - antiproton-proton elastic scattering Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

at Fermilab. Nucl. Instrum. Meth. Phys. Res. A 410, Summary: . 70(9), 1212-- 1215. Armstrong, T. A. et al. (1996). Precision measurements of antiproton- proton... forward...

14

E-Print Network 3.0 - antiproton-proton interactions Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

at Fermilab. Nucl. Instrum. Meth. Phys. Res. A 410, Summary: . 70(9), 1212-- 1215. Armstrong, T. A. et al. (1996). Precision measurements of antiproton- proton... --486....

15

Publisher's Note: ''The MaPLE device of Saha Institute of Nuclear Physics: Construction and its plasma aspects'' [Rev. Sci. Instrum. 81, 073507 (2010)  

SciTech Connect (OSTI)

The Magnetized Plasma Linear Experimental (MaPLE) device is a low cost laboratory plasma device at Saha Institute of Nuclear Physics fabricated in-house with the primary aim of studying basic plasma physics phenomena such as plasma instabilities, wave propagation, and their nonlinear behavior in magnetized plasma regime in a controlled manner. The machine is specially designed to be a versatile laboratory device that can provide a number of magnetic and electric scenario to facilitate such studies. A total of 36 number of 20-turn magnet coils, designed such as to allow easy handling, is capable of producing a uniform, dc magnetic field of about 0.35 T inside the plasma chamber of diameter 0.30 m. Support structure of the coils is planned in an innovative way facilitating straightforward fabrication and easy positioning of the coils. Further special feature lies in the arrangement of the spacers between the coils that can be maneuvered rather easily to create different magnetic configurations. Various methods of plasma production can be suitably utilized according to the experimental needs at either end of the vacuum vessel. In the present paper, characteristics of a steady state plasma generated by electron cyclotron resonance method using 2.45 GHz microwave power are presented. Scans using simple probe drives revealed that a uniform and long plasma column having electron density {approx} 3-5 Multiplication-Sign 1010 cm-3 and temperature {approx} 7-10 eV, is formed in the center of the plasma chamber which is suitable for wave launching experiments.

Pal, Rabindranath; Biswas, Subir; Basu, Subhasis; Chattopadhyay, Monobir; Basu, Debjyoti; Chaudhuri, Manis [Saha Institute of Nuclear Physics, I/AF Bidhannagar, Kolkata 700 064 (India)

2010-07-15T23:59:59.000Z

16

Initial phase zone for phase locking to the resonance, using “main condition” of phase stability in DC-biased single-sided multipactor  

SciTech Connect (OSTI)

In the present work, the concept of accurate phase stability is employed to study a DC-biased single-sided multipactor. A “main condition” of phase stability was introduced in our previous studies of two-sided multipactors [M. Mostajeran, J. Instrum. 8, P04024 (2013); M. Mostajeran and M. Lamehi Rachti, Nucl. Instrum. Methods Phys. Res. A 615, 1–5 (2010)]. Using the same condition and assuming zero initial velocity for the secondary electrons, a regime of multipactors outside the resonance zones is found. The theoretical results are then verified by numerical simulation.

Mostajeran, M., E-mail: mostajeran@yazd.ac.ir [Faculty of Physics, Yazd University, P.O. Box 89195-741, Yazd (Iran, Islamic Republic of)

2014-05-15T23:59:59.000Z

17

IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 53 (2013) 042001 (3pp) doi:10.1088/0029-5515/53/4/042001  

E-Print Network [OSTI]

IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 53 (2013) 042001 Extreme Environment, School of Nuclear Engineering, Purdue University, West Lafayette, IN, USA Received 9 directly (e.g. by spectroscopy), integration of the post-exposure W deposition showed that a net effective

Harilal, S. S.

18

| International Atomic Energy Agency Nuclear Fusion Nucl. Fusion 54 (2014) 043016 (8pp) doi:10.1088/0029-5515/54/4/043016  

E-Print Network [OSTI]

| International Atomic Energy Agency Nuclear Fusion Nucl. Fusion 54 (2014) 043016 (8pp) doi:10. Hassanein Center for Materials under Extreme Environment, School of Nuclear Engineering, Purdue University the developed volume-of-fluid magnetohydrodynamic code. The effects of plasma velocity and magnetic field

Harilal, S. S.

19

| International Atomic Energy Agency Nuclear Fusion Nucl. Fusion 54 (2014) 023004 (9pp) doi:10.1088/0029-5515/54/2/023004  

E-Print Network [OSTI]

| International Atomic Energy Agency Nuclear Fusion Nucl. Fusion 54 (2014) 023004 (9pp) doi:10 Tatyana Sizyuk and Ahmed Hassanein Center for Materials under Extreme Environment, School of Nuclear for publication 17 December 2013 Published 21 January 2014 Abstract The plasma shielding effect is a well

Harilal, S. S.

20

IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 50 (2010) 014001 (11pp) doi:10.1088/0029-5515/50/1/014001  

E-Print Network [OSTI]

IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 50 (2010) 014001 its worth. Looking at the way forward, this vision constitutes a strong basis to harness fusion energy Cabinet of the French High Commissioner for Atomic Energy CEA, 91191 Gif-sur-Yvette, France Received 19

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 49 (2009) 055018 (13pp) doi:10.1088/0029-5515/49/5/055018  

E-Print Network [OSTI]

IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 49 (2009) 055018 experimental and theoretical status of the most basic issues of FRC stability, confinement, and current drive field line linear systems as fusion reactors. We also develop scaling relations for extrapolation from

Washington at Seattle, University of

22

INSTITUTE OF PHYSICS PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 43 (2003) 16931709 PII: S0029-5515(03)67272-8  

E-Print Network [OSTI]

INSTITUTE OF PHYSICS PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 43 (2003) 1693­1709 PII: S0029-5515(03)67272-8 Fusion energy with lasers, direct drive targets.iop.org/NF/43/1693 Abstract A coordinated, focused effort is underway to develop Laser Inertial Fusion Energy

Ghoniem, Nasr M.

23

and INTERNATIONAL ATOMIC ENERGY AGENCYIOP PUBLISHING NUCLEAR FUSION Nucl. Fusion 48 (2008) 024016 (13pp) doi:10.1088/0029-5515/48/2/024016  

E-Print Network [OSTI]

and INTERNATIONAL ATOMIC ENERGY AGENCYIOP PUBLISHING NUCLEAR FUSION Nucl. Fusion 48 (2008) 024016 devices Milan Rajkovi´c1 , Milos Skori´c2 , Knut Sølna3 and Ghassan Antar4 1 Institute of Nuclear Sciences the issue of estimating the variable power law behavior of spectral densities is addressed. The analysis

Solna, Knut

24

IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 50 (2010) 014006 (6pp) doi:10.1088/0029-5515/50/1/014006  

E-Print Network [OSTI]

.57.-z, 89.30.Ji 1. Laser and laser fusion from past and present to future In 1917, Albert EinsteinIOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 50 (2010) 014006 energized implosion could be utilized for energy generation. Today, there are many facilities worldwide

25

IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 50 (2010) 014004 (14pp) doi:10.1088/0029-5515/50/1/014004  

E-Print Network [OSTI]

IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 50 (2010) 014004 of nuclear energy in the form of nuclear fission were established with the nuclear powered submarine Research and Energy®, 48 Oakland Street, Princeton, NJ 08540, USA E-mail: dmeade@pppl.gov Received 6 August

26

IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 49 (2009) 095020 (12pp) doi:10.1088/0029-5515/49/9/095020  

E-Print Network [OSTI]

IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 49 (2009) 095020-scale fluctuations, in contrast to present day experiments where, in general, relatively low energy fast ions of alpha particles produced in DT reactions as the main heating source. Fusion alphas, with small

Zonca, Fulvio

27

Viability of nuclear $?$-particle condensates A reply to N.T. Zinner and A.S. Jensen, arXiv:nucl/th0712.1191  

E-Print Network [OSTI]

In a recent paper, arXiv0712.1191 [nucl-th], Zinner and Jensen (ZJ) expressed strong doubts about the concept of alpha-particle condensation in finite nuclei. In this article we give a reply which, essentially, is point by point (but not in the order).

Y. Funaki; H. Horiuchi; G. Roepke; P. Schuck; A. Tohsaki; T. Yamada; W. von Oertzen

2008-05-16T23:59:59.000Z

28

IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 50 (2010) 014002 (10pp) doi:10.1088/0029-5515/50/1/014002  

E-Print Network [OSTI]

Harnessing the energy of thermonuclear fusion reactions is one of the greatest challenges of our time. FusionIOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 50 (2010) 014002 (10pp) doi:10.1088/0029-5515/50/1/014002 ITER on the road to fusion energy Kaname Ikeda Director

29

arXiv:nucl-th/0607015v213Jul2006 Direct reactions in/for astrophysics  

E-Print Network [OSTI]

. In recent years direct reactions methods have been developed and applied to extract low-energy astrophysical are focused on the opposite ends of the energy scale of nuclear reactions: (a) the very high and (b) the very end of the energy scale are the low energy reactions of importance for stellar evolution. Chains

Bertulani, Carlos A. - Department of Physics and Astronomy, Texas A&M University

30

Reliable before-fabrication forecasting of expected surface slope distributions for x-ray optics  

E-Print Network [OSTI]

measurements of x-ray optics,” Proc. SPIE 5921, 59210G (radiation grazing-incidence optics,” Nucl. Instrum. Methodsray beams by reflective optics,” Proc. SPIE 4782, 271-276 (

Yashchuk, Yekaterina V.

2013-01-01T23:59:59.000Z

31

Contrasting Supersymmetry and Universal Extra Dimensions at the CLIC Multi-TeV e+e- Collider  

E-Print Network [OSTI]

ph/0212140. [46] M. Battaglia, Nucl. Instrum. Meth. A 522 (SLAC-TN-04- 032. [43] M. Battaglia, S. Jadach and D. Bardin,E3019 (2001). [45] M. Battaglia and M. Gruwe, arXiv:hep-

Battaglia, Marco

2009-01-01T23:59:59.000Z

32

Nucl. Phys. B 663  

E-Print Network [OSTI]

H. Saleur, B. Wehefritz-Kaufmann / Nuclear Physics B 663 [FS] (2003) 443–466 recently, but so far, very few complete results are available. This paper is the ...

2003-06-23T23:59:59.000Z

33

Nucl. Phys. B 493  

E-Print Network [OSTI]

Nuclear Physics B 493 IFS] (1997) 541-570. El. The free energy singularity of the asymmetric six-vertex model and the excitations of the asymmetric XXZ chain.

2003-02-24T23:59:59.000Z

34

INSTITUTE OF PHYSICS PUBLISHING JOURNAL OF PHYSICS G: NUCLEAR AND PARTICLE PHYSICS J. Phys. G: Nucl. Part. Phys. 32 (2006) S61S68 doi:10.1088/0954-3899/32/12/S07  

E-Print Network [OSTI]

INSTITUTE OF PHYSICS PUBLISHING JOURNAL OF PHYSICS G: NUCLEAR AND PARTICLE PHYSICS J. Phys. G: Nucl of longitudinal dynamics at RHIC J H Lee (for the BRAHMS Collaboration1 ) Physics Department, Brookhaven NationalQGP', that we have searched for. In order to characterize the nature of the created nuclear (partonic

35

Ann. nucl. Energy, Vol. 15,No. 7, pp. 333 346,1988 0306-4549/88 $3.00+0.00 Printed in Great Britain.Allrightsreserved Copyright 1988PergamonPressplc  

E-Print Network [OSTI]

usually the rods can be treated as 1-D objects (line filaments) in a 3-D reactor with axial symmetryAnn. nucl. Energy, Vol. 15,No. 7, pp. 333 346,1988 0306-4549/88 $3.00+0.00 Printed in Great Britain

Pázsit, Imre

36

An investigation of a method of determining the salinity of sea water by the electrical conduction method without the use of electrodes  

E-Print Network [OSTI]

method was in 1916. The suggest1on was macle that two 1dentical electolytic cells 1n two of the arms of a Wheatstone bridge circuit be placed in a water bath to bring them to the same temperature. One of the cells contained a standard solution while... measurements are described in the 11terature. ' These instrumer ts employed. Wheatstone bridge cir- 4, 5 cuits by which the conductivity of a batch, or flowing sample, of sea water was co:spared with a standard of known salinity contained in a sealed cell...

Adams, William Floyd

1954-01-01T23:59:59.000Z

37

Measurement of the half-life of (198)Au in a nonmetal: High-precision measurement shows no host-material dependence  

E-Print Network [OSTI]

://www.ortec-online.com/Solutions/multichannel-analyzers. aspx]. [8] R. Jenkins, R. W. Gould, and D. Gedcke, Quantitative X-ray Spectrometry (Dekker, New York, 1981), p. 266. [9] D. Radford (private communication) [http://radware.phy. ornl.gov/main.html]. [10] R. Brun and F. Rademakers, Nucl. Instrum...

Goodwin, J. R.; Nica, N.; Iacob, V. E.; Dibidad, A.; Hardy, John C.

2010-01-01T23:59:59.000Z

38

Emittance growth due to static and radiative space charge forces in an electron bunch compressor  

E-Print Network [OSTI]

Evolution of short intense electron bunches passing through bunch-compressing beam lines is studied using the UAL (Unified Accelerator Libraries) string space charge formulation [R. Talman, Phys. Rev. ST Accel. Beams 7, 100701 (2004); N. Malitsky and R. Talman, in Proceedings of the 9th European Particle Accelerator Conference, Lucerne, 2004 (EPS-AG, Lucerne, 2004); R. Talman, Accelerator X-Ray Sources (Wiley-VCH, Weinheim, 2006), Chap. 13]. Three major configurations are studied, with the first most important and studied in greatest detail (because actual experimental results are available and the same results have been simulated with other codes): (i) Experimental bunch compression results were obtained at CTF-II, the CERN test facility for the “Compact Linear Collider” using electrons of about 40 MeV. Previous simulations of these results have been performed (using trafic4* [A. Kabel et al., Nucl. Instrum. Methods Phys. Res., Sect. A 455, 185 (2000)] and elegant [M. Borland, Argonne National Laboratory...

Talman, Richard; Stulle, Frank

2009-01-01T23:59:59.000Z

39

INSTITUTE OF PHYSICS PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 46 (2006) 162170 doi:10.1088/0029-5515/46/1/018  

E-Print Network [OSTI]

method by counter-helicity spheromak merging. Kinetic simulations show nonlinear saturation of the n = 1 and the resulting loss of particle confinement. Three-dimensional MHD simulations of counter-helicity spheromak on counter- helicity spheromak merging, has demonstrated the advantage of this approach compared

Brown, Michael R.

40

B.S.M.E. DEGREE IN MECHANICAL ENGINEERING AND ENGINEERING SCIENCE  

E-Print Network [OSTI]

3116 HEAT TRANSFER 3 MEGR 3171 MEAS. & INSTRUM. 2 MEGR 3156 DESIGN PROJ. LAB II 2 MEGR 3171L INSTRUM: Introduction to Finite Element Analysis (requires MEGR 2144 and 2240) · MEGR 3231: Advanced CAD/CAM (requires MEGR 2240 COMPUTATIONAL METHODS 3 16 17 JUNIOR YEAR MEGR 3111 THERMODYNAMICS I 3 MEGR 3112

Raja, Anita

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

STATISTICAL METHODS STATISTICAL METHODS  

E-Print Network [OSTI]

STATISTICAL METHODS 1 STATISTICAL METHODS Arnaud Delorme, Swartz Center for Computational@salk.edu. Keywords: statistical methods, inference, models, clinical, software, bootstrap, resampling, PCA, ICA Abstract: Statistics represents that body of methods by which characteristics of a population are inferred

Delorme, Arnaud

42

Nuclear Tracks, Vol.]2, Nos I-6, pp.5-17, ]986. Int.J.Radiat.Appl. Instrum., Part D  

E-Print Network [OSTI]

-nucleus bound state and are a valuable benchmark in an ongoing search for s|ow, supermassive magnetic monopoles to interactions of 8.8 HeV alpha particles from ZI2Po decay with A1 and Si nuclei In mica. Alpha particles from with recent cross section data of Seamster et el. (1984), and taking into account slowing of 8.8 HeV alphas

Price, P. Buford

43

Accepted for publication in Rev. Sci. instrum. (2008). First measurements of the absolute neutron spectrum using the Magnetic Recoil  

E-Print Network [OSTI]

, USA 3 Lawrence Livermore National Laboratory, Livermore, California 94550, USA 4 Los Alamos National, Albuquerque, New Mexico, May 2008. b) Present address: Lawrence Livermore National Laboratory, Livermore neutron spectrum are presented. In addition, measuring R at the National Ignition Facility (NIF) [G

44

26. J. P. Cleveland, S. Manne, D. Bocek, P. K. Hansma, Rev. Sci. Instrum. 64, 403 (1993).  

E-Print Network [OSTI]

. Rasmussen, T. E. Rostrup, J. Ulstrup, in Protein Folds: A Distance-Based Ap- proach, H. Bohr, S. Brunak, Eds

Reiners, Peter W.

45

J. Condensed Matter Nucl. Sci. 5 (2011) 87101 Research Article  

E-Print Network [OSTI]

motivated us to pursue new models in which the nuclear energy is transferred directly to low energy In the Fleischmann­Pons experiment, energy is produced without commensurate energetic reaction products. To account energy estimated in this way is below 20 keV [12]. The experimental reaction energy per 4He observed

Williams, Brian C.

46

Vermont Yankee Nucl Pwr Corp | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,Save Energy NowNew HampshireValeroTrans Co Inc Jump to:LLC

47

Correlation methods  

SciTech Connect (OSTI)

Correlation methods have been developed to provide a quick and relatively simple technique for estimating the performance of passive solar systems. The correlations are done with respect to data generated from simulation models. The techniques and accuracies are described. Both the Solar Load Ratio and Un-Utilizability methods are described. The advantages and limitations of correlation methods as design tools are discussed.

Balcomb, J.D.

1981-01-01T23:59:59.000Z

48

Estimating Methods  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

Based on the project's scope, the purpose of the estimate, and the availability of estimating resources, the estimator can choose one or a combination of techniques when estimating an activity or project. Estimating methods, estimating indirect and direct costs, and other estimating considerations are discussed in this chapter.

1997-03-28T23:59:59.000Z

49

Characterization methods  

SciTech Connect (OSTI)

Methods discussed in this compilation of notes and diagrams are Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, and other surface analysis techniques (auger electron spectroscopy, x-ray photoelectron spectroscopy, electron energy loss spectroscopy, and scanning tunnelling microscopy). A comparative evaluation of different techniques is performed. In-vacuo and in-situ analyses are described.

Glass, J.T. [North Carolina State Univ., Raleigh (United States)

1993-01-01T23:59:59.000Z

50

Design of a compact, permanent magnet electron cyclotron resonance ion source for proton and H{sub 2}{sup +} beam production  

SciTech Connect (OSTI)

A 2.45 GHz microwave ion source was developed at China Institute of Atomic Energy (CIAE) for proton beam production of over 60 mA [B.-Q. Cui, Y.-W. Bao, L.-Q. Li, W.-S. Jiang, and R.-W. Wang, Proceedings of the High Current Electron Cyclotron Resonance (ECR) Ion Source for Proton Accelerator, APAC-2001, 2001 (unpublished)]. For various proton beam applications, another 2.45 GHz microwave ion source with a compact structure is designed and will be built at CIAE as well for high current proton beam production. It is also considered to be used for the test of H{sub 2}{sup +} beam, which could be injected into the central region model cyclotron at CIAE, and accelerated to 5 MeV before extraction by stripping. The required ECR magnetic field is supplied by all the permanent magnets rather than electrical solenoids and six poles. The magnetic field distribution provided by this permanent magnets configuration is a large and uniformly volume of ECR zone, with central magnetic field of a magnitude of {approx}875 Gs[T. Taylor and J. S. C. Wills, Nucl. Instrum. Methods Phys. Res. A 309, 37 (1991)]. The field adjustment at the extraction end can be implemented by moving the position of the magnet blocks. The results of plasma, coupling with 2.45 GHz microwave in the ECR zone inside the ion source are simulated by particle-in-cell code to optimize the density by adjusting the magnetic field distribution. The design configuration of the ion source will be summarized in the paper.

Jia Xianlu; Zhang Tianjue; Wang Chuan; Zheng Xia; Yin Zhiguo; Zhong Junqing; Wu Longcheng; Qin Jiuchang [China Institute of Atomic Energy, P.O. Box 275(3), Beijing 102413 (China); Luo Shan [The 6th Department, Communication Command Academy, Wuhan 430010 (China)

2010-02-15T23:59:59.000Z

51

Tensiometer methods  

DOE Patents [OSTI]

A method for collecting data regarding a matric potential of a media includes providing a tensiometer having a stainless steel tensiometer casing, the stainless steel tensiometer casing comprising a tip portion which includes a wetted porous stainless steel membrane through which a matric potential of a media is sensed; driving the tensiometer into the media using an insertion tube comprising a plurality of probe casing which are selectively coupled to form the insertion tube as the tensiometer is progressively driven deeper into the media, wherein the wetted porous stainless steel membrane is in contact with the media; and sensing the matric potential the media exerts on the wetted porous stainless steel membrane by a pressure sensor in fluid hydraulic connection with the porous stainless steel membrane. A tensiometer includes a stainless steel casing.

Grover, Blair K.; Hubbell, Joel M.; Sisson, James B.; Casper, William L.

2005-12-20T23:59:59.000Z

52

Casting methods  

DOE Patents [OSTI]

A casting device includes a covered crucible having a top opening and a bottom orifice, a lid covering the top opening, a stopper rod sealing the bottom orifice, and a reusable mold having at least one chamber, a top end of the chamber being open to and positioned below the bottom orifice and a vacuum tap into the chamber being below the top end of the chamber. A casting method includes charging a crucible with a solid material and covering the crucible, heating the crucible, melting the material, evacuating a chamber of a mold to less than 1 atm absolute through a vacuum tap into the chamber, draining the melted material into the evacuated chamber, solidifying the material in the chamber, and removing the solidified material from the chamber without damaging the chamber.

Marsden, Kenneth C.; Meyer, Mitchell K.; Grover, Blair K.; Fielding, Randall S.; Wolfensberger, Billy W.

2012-12-18T23:59:59.000Z

53

arXiv:nucl-ex/0507026v119Jul2005 Optical calibration hardware for the Sudbury  

E-Print Network [OSTI]

in the heavy water and light water, and the angular dependence of the response of the detector to detect Che- renkov light produced by solar neutrino interactions in heavy water (D2O). The accuracy). The determination of light attenuation in the heavy and light water and the PMT response as a function of incident

Waltham, Chris

54

arXiv:nucl-th/001006118Oct2000 INTERACTIONS, CURRENTS, AND THE STRUCTURE OF  

E-Print Network [OSTI]

form factors, -decays, radiative and weak capture reactions at low energies, inclusive response on two- and three- nucleon interactions and associated electro-weak currents. Low-energy radiative to hadronic and electro-weak probes at intermediate energies. In the present talk, I will review the "nuclear

Thomas Jefferson National Accelerator Facility

55

J Nucl Med . Author manuscript Noninternalizing monoclonal antibodies are suitable candidates for I125  

E-Print Network [OSTI]

decays were calculated. These values were used to calculate the irradiation dose by the MIRD formalism

Paris-Sud XI, Université de

56

J Nucl Med . Author manuscript Brief intraperitoneal radioimmunotherapy of small peritoneal  

E-Print Network [OSTI]

by organs and tumors was calculated using the MIRD formalism. Results Mild, transient hematological toxicity

Paris-Sud XI, Université de

57

Introduction Conjugate Gradient Method  

E-Print Network [OSTI]

Introduction Conjugate Gradient Method Deflation Domain Decomposition Research Master Thesis Presentation #12;Introduction Conjugate Gradient Method Deflation Domain Decomposition Research Plaxis Finite Kaliszka Master Thesis Literature Study Presentation #12;Introduction Conjugate Gradient Method Deflation

Vuik, Kees

58

Direct measurement of product of the electron mobility and mean free drift time of CdZnTe semiconductors using position sensitive single  

E-Print Network [OSTI]

Institute of Physics. Related Articles A new detector for mass spectrometry: Direct detection of low energy of material trends in nonproportionality of scintillators J. Appl. Phys. 109, 123716 (2011) A digital method Rev. Sci. Instrum. 81, 10E503 (2010) Development of a thermal neutron detector based on scintillating

He, Zhong

59

Radiochemical method development  

SciTech Connect (OSTI)

The authors have developed methods for chemical characterization of the environment under a multitask project that focuses on improvement of radioanalytical methods with an emphasis on faster and cheaper routine methods. The authors have developed improved methods for separation of environmental levels of technetium-99, radium, and actinides from soil and water; separation of actinides from soil and water matrix interferences; and isolation of strontium. They are also developing methods for simultaneous detection of multiple isotopes (including nonradionuclides) by using a new instrumental technique, inductively coupled plasma-mass spectrometry (ICP-MS). The new ICP-MS methods have greater sensitivity and efficiency and could replace many radiometric techniques. They are using flow injection analysis to integrate and automate the separation methods with the ICP-MS methodology. The final product of all activities will be methods that are available (published in the U.S. Department of Energy`s analytical methods compendium) and acceptable for use in regulatory situations.

Erickson, M.D.; Aldstadt, J.H.; Alvarado, J.S.; Crain, J.S.; Orlandini, K.A.; Smith, L.L.

1994-09-01T23:59:59.000Z

60

ENVIRONMENTAL PHYSICS METHODS  

E-Print Network [OSTI]

ENVIRONMENTAL PHYSICS METHODS LABORATORY PRACTICES #12;Foundations of Environmental Science Lecture Enviromental Physics Methods Laboratory Practices #12;Eötvös Loránd University Faculty of Science ENVIRONMENTAL tankönyvsorozat" (KMR Foundations of Environmental Science Lecture Series). KEYWORDS: Environmental physics

Horváth, Ákos

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Method of intrinsic marking  

DOE Patents [OSTI]

A method of pulsed laser intrinsic marking can provide a unique identifier to detect tampering or counterfeiting.

Adams, David P; McDonald, Joel Patrick; Jared, Bradley Howell; Hodges, V. Carter; Hirschfeld, Deidre; Blair, Dianna S

2014-04-01T23:59:59.000Z

62

Accelerated molecular dynamics methods  

SciTech Connect (OSTI)

The molecular dynamics method, although extremely powerful for materials simulations, is limited to times scales of roughly one microsecond or less. On longer time scales, dynamical evolution typically consists of infrequent events, which are usually activated processes. This course is focused on understanding infrequent-event dynamics, on methods for characterizing infrequent-event mechanisms and rate constants, and on methods for simulating long time scales in infrequent-event systems, emphasizing the recently developed accelerated molecular dynamics methods (hyperdynamics, parallel replica dynamics, and temperature accelerated dynamics). Some familiarity with basic statistical mechanics and molecular dynamics methods will be assumed.

Perez, Danny [Los Alamos National Laboratory

2011-01-04T23:59:59.000Z

63

Slow isocharged sequence ions with helium collisions: Projectile core dependence  

SciTech Connect (OSTI)

The collisions of the isocharged sequence ions of q=6 (C{sup 6+}, N{sup 6+}, O{sup 6+}, F{sup 6+}, Ne{sup 6+}, Ar{sup 6+}, and Ca{sup 6+}), q=7 (F{sup 7+}, Ne{sup 7+}, S{sup 7+}, Ar{sup 7+}, and Ca{sup 7+}), q=8 (F{sup 8+}, Ne{sup 8+}, Ar{sup 8+}, and Ca{sup 8+}), q=9 (F{sup 9+}, Ne{sup 9+}, Si{sup 9+}, S{sup 9+}, Ar{sup 9+}, and Ca{sup 9+}) and q=11 (Si{sup 11+}, Ar{sup 11+}, and Ca{sup 11+}) with helium at the same velocities were investigated. The cross-section ratios of the double-electron transfer (DET) to the single-electron capture (SEC) {sigma}{sup DET}/{sigma}{sup SEC} and the true double-electron capture (TDC) to the double-electron transfer {sigma}{sup TDC}/{sigma}{sup DET} were measured. It shows that for different ions in an isocharged sequence, the experimental cross-section ratio {sigma}{sup DET}/{sigma}{sup SEC} varies by a factor of 3. The results confirm that the projectile core is another dominant factor besides the charge state and the collision velocity in slow (0.35-0.49v{sub 0}; v{sub 0} denotes the Bohr velocity) highly charged ions (HCIs) with helium collisions. The experimental cross-section ratio {sigma}{sup DET}/{sigma}{sup SEC} is compared with the extended classical over-barrier model (ECBM) [A. Barany et al., Nucl. Instrum. Methods Phys. Res. B 9, 397 (1985)], the molecular Coulombic barrier model (MCBM) [A. Niehaus, J. Phys. B 19, 2925 (1986)], and the semiempirical scaling laws (SSL) [N. Selberg et al., Phys. Rev. A 54, 4127 (1996)]. It also shows that the projectile core properties affect the initial capture probabilities as well as the subsequent relaxation of the projectiles. The experimental cross-section ratio {sigma}{sup TDC}/{sigma}{sup DET} for those lower isocharged sequences is dramatically affected by the projectile core structure, while for those sufficiently highly isocharged sequences, the autoionization always dominates, hence the cross-section ratio {sigma}{sup TDC}/{sigma}{sup DET} is always small.

Yu Deyang; Cai Xiaohong; Shao Caojie; Lu Jun; Yang Zhihu [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Lu Rongchun; Ruan Fangfang [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Graduate School of the Chinese Academy of Sciences, Beijing 100049 (China); Zhang Hongqiang; Cui Ying; Xu Xu; Shao Jianxiong; Ding Baowei; Chen Ximeng; Liu Zhaoyuan [Department of Modern Physics, Lanzhou University, Lanzhou 730000 (China)

2007-08-15T23:59:59.000Z

64

Method of degrading trinitrotoluene  

DOE Patents [OSTI]

A method is disclosed of eluting trinitrotoluene (TNT) from soil using a dispersant from bacterial intra-amoebic isolate 1s, ATCC 75229.

Tyndall, R.L.; Vass, A.

1996-01-16T23:59:59.000Z

65

Method of degrading trinitrotoluene  

DOE Patents [OSTI]

A method of eluting trinitrotoluene (TNT) from soil using a dispersant from bacterial intra-amoebic isolate 1s, ATCC 75229.

Tyndall, Richard L. (Clinton, TN); Vass, Arpad (Oak Ridge, TN)

1996-01-01T23:59:59.000Z

66

Finite Volume Element Method  

E-Print Network [OSTI]

FVE is closely related to the control volume finite element method ... simple stencils, to apply to a fairly wide range of fluid flow equations, to effectively treat.

2003-12-06T23:59:59.000Z

67

Computational Physics and Methods  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Wang, Shanlin Warsa, James Weijer, Wilbert Wienke, Bruce Wohlbier, John Wollaber, Allan Zerr, (Joe)Robert Capabilities Advanced transport methods for particles and thermal...

68

Water treatment method  

DOE Patents [OSTI]

A method for reducing the concentration of any undesirable metals dissolved in contaminated water, such as waste water. The method involves uniformly reacting the contaminated water with an excess amount of solid particulate calcium sulfite to insolubilize the undesirable metal ions, followed by removal thereof and of the unreacted calcium sulfite.

Martin, Frank S. (Farmersville, OH); Silver, Gary L. (Centerville, OH)

1991-04-30T23:59:59.000Z

69

Sampling system and method  

DOE Patents [OSTI]

An apparatus and method for supporting a tubing bundle during installation or removal. The apparatus includes a clamp for securing the tubing bundle to an external wireline. The method includes deploying the tubing bundle and wireline together, The tubing bundle is periodically secured to the wireline using a clamp.

Decker, David L; Lyles, Brad F; Purcell, Richard G; Hershey, Ronald Lee

2014-05-20T23:59:59.000Z

70

Water treatment method  

DOE Patents [OSTI]

A method is described for reducing the concentration of any undesirable metals dissolved in contaminated water, such as waste water. The method involves uniformly reacting the contaminated water with an excess amount of solid particulate calcium sulfite to insolubilize the undesirable metal ions, followed by removal thereof and of the unreacted calcium sulfite.

Martin, F.S.; Silver, G.L.

1991-04-30T23:59:59.000Z

71

Method of forming nanodielectrics  

DOE Patents [OSTI]

A method of making a nanoparticle filled dielectric material. The method includes mixing nanoparticle precursors with a polymer material and reacting the nanoparticle mixed with the polymer material to form nanoparticles dispersed within the polymer material to form a dielectric composite.

Tuncer, Enis [Knoxville, TN; Polyzos, Georgios [Oak Ridge, TN

2014-01-07T23:59:59.000Z

72

Methods for data classification  

DOE Patents [OSTI]

The present invention provides methods for classifying data and uncovering and correcting annotation errors. In particular, the present invention provides a self-organizing, self-correcting algorithm for use in classifying data. Additionally, the present invention provides a method for classifying biological taxa.

Garrity, George (Okemos, MI); Lilburn, Timothy G. (Front Royal, VA)

2011-10-11T23:59:59.000Z

73

Cleaning method and apparatus  

DOE Patents [OSTI]

A method of very thoroughly and quikcly cleaning a guaze electrode used in chemical analyses is given, as well as an automobile cleaning apparatus which makes use of the method. The method generates very little waste solution, and this is very important in analyzing radioactive materials, especially in aqueous solutions. The cleaning apparatus can be used in a larger, fully automated controlled potential coulometric apparatus. About 99.98% of a 5 mg plutonium sample was removed in less than 3 minutes, using only about 60 ml of rinse solution and two main rinse steps.

Jackson, D.D.; Hollen, R.M.

1981-02-27T23:59:59.000Z

74

Method for inducing hypothermia  

DOE Patents [OSTI]

Systems for phase-change particulate slurry cooling equipment and methods to induce hypothermia in a patient through internal and external cooling are provided. Subcutaneous, intravascular, intraperitoneal, gastrointestinal, and lung methods of cooling are carried out using saline ice slurries or other phase-change slurries compatible with human tissue. Perfluorocarbon slurries or other slurry types compatible with human tissue are used for pulmonary cooling. And traditional external cooling methods are improved by utilizing phase-change slurry materials in cooling caps and torso blankets.

Becker, Lance B. (Chicago, IL); Hoek, Terry Vanden (Chicago, IL); Kasza, Kenneth E. (Palos Park, IL)

2008-09-09T23:59:59.000Z

75

Method for inducing hypothermia  

DOE Patents [OSTI]

Systems for phase-change particulate slurry cooling equipment and methods to induce hypothermia in a patient through internal and external cooling are provided. Subcutaneous, intravascular, intraperitoneal, gastrointestinal, and lung methods of cooling are carried out using saline ice slurries or other phase-change slurries compatible with human tissue. Perfluorocarbon slurries or other slurry types compatible with human tissue are used for pulmonary cooling. And traditional external cooling methods are improved by utilizing phase-change slurry materials in cooling caps and torso blankets.

Becker, Lance B. (Chicago, IL); Hoek, Terry Vanden (Chicago, IL); Kasza, Kenneth E. (Palos Park, IL)

2003-04-15T23:59:59.000Z

76

Catalytic reforming methods  

DOE Patents [OSTI]

A catalytic reforming method is disclosed herein. The method includes sequentially supplying a plurality of feedstocks of variable compositions to a reformer. The method further includes adding a respective predetermined co-reactant to each of the plurality of feedstocks to obtain a substantially constant output from the reformer for the plurality of feedstocks. The respective predetermined co-reactant is based on a C/H/O atomic composition for a respective one of the plurality of feedstocks and a predetermined C/H/O atomic composition for the substantially constant output.

Tadd, Andrew R; Schwank, Johannes

2013-05-14T23:59:59.000Z

77

Method for inducing hypothermia  

DOE Patents [OSTI]

Systems for phase-change particulate slurry cooling equipment and methods to induce hypothermia in a patient through internal and external cooling are provided. Subcutaneous, intravascular, intraperitoneal, gastrointestinal, and lung methods of cooling are carried out using saline ice slurries or other phase-change slurries compatible with human tissue. Perfluorocarbon slurries or other slurry types compatible with human tissue are used for pulmonary cooling. And traditional external cooling methods are improved by utilizing phase-change slurry materials in cooling caps and torso blankets.

Becker, Lance B.; Hoek, Terry Vanden; Kasza, Kenneth E.

2005-11-08T23:59:59.000Z

78

Methods for measuring turbine efficiency  

SciTech Connect (OSTI)

This article describes the most common methods used for measuring hydro turbine efficiency. These methods are the acoustic flowmeter method, the Gibson (pressure-time) method, pressure drop across a flow restriction, propeller-driven flowmeters, the volumetric method, Winter-Kennedy taps, and the thermodynamic method. A new computerized variation of the Gibson method is also described.

O'Kelly, F.

1992-04-01T23:59:59.000Z

79

Semiparametric Methods and Applications  

E-Print Network [OSTI]

theoretical semiparametric methods, we study the dynamic effectiveness of marketing mix variables and the competition among the pioneer and early followers in pharmaceutical industry. With two pharmaceutical categories data, we find dynamic effectiveness...

Lin, Zhongjian

2014-05-02T23:59:59.000Z

80

Bayesian methods in bioinformatics  

E-Print Network [OSTI]

- niques for drawing random samples from the posterior for inference. We show that the approach achieves very competitive performance as compared to other methods. The second part focuses on modeling DNA microarray data. Microarray technology enables us...

Baladandayuthapani, Veerabhadran

2007-04-25T23:59:59.000Z

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Stochastic Methods Gabriel Zachmann  

E-Print Network [OSTI]

1 Stochastic Methods Gabriel Zachmann Universität Bonn Motivation ADB-Trees Stochastic Closest-Trees [Klein & Zachmann, 2003] 2. Stochastic Closest Features Tracking [Raghupathi et al., 2004; Debunne & Guy

Behnke, Sven

82

Universiteit Antwerpen Research Methods  

E-Print Network [OSTI]

crash, Denver Airport Baggage) Lives are at stake (e.g., automatic pilot, nuclear power plants vs. Performing a Case Study + Proposition + Unit of Analysis + Threats to Validity Research Methods 3

Nierstrasz, Oscar

83

Method for synthesizing boracities  

DOE Patents [OSTI]

A method for producing boracites is disclosed in which a solution of divalent metal acetate, boric acid, and halogen acid is evaporated to dryness and the resulting solid is heated in an inert atmosphere under pressure.

Wolf, Gary A [Kennewick, WA

1982-01-01T23:59:59.000Z

84

Method of treating depression  

DOE Patents [OSTI]

Methods for treatment of depression-related mood disorders in mammals, particularly humans are disclosed. The methods of the invention include administration of compounds capable of enhancing glutamate transporter activity in the brain of mammals suffering from depression. ATP-sensitive K.sup.+ channel openers and .beta.-lactam antibiotics are used to enhance glutamate transport and to treat depression-related mood disorders and depressive symptoms.

Henn, Fritz

2013-04-09T23:59:59.000Z

85

Method of treating depression  

DOE Patents [OSTI]

Methods for treatment of depression-related mood disorders in mammals, particularly humans are disclosed. The methods of the invention include administration of compounds capable of enhancing glutamate transporter activity in the brain of mammals suffering from depression. ATP-sensitive K.sup.+ channel openers and .beta.-lactam antibiotics are used to enhance glutamate transport and to treat depression-related mood disorders and depressive symptoms.

Henn, Fritz (East Patchogue, NY)

2012-01-24T23:59:59.000Z

86

Pushing schedule derivation method  

SciTech Connect (OSTI)

The development of a Pushing Schedule Derivation Method has allowed the company to sustain the maximum production rate at CSH`s Coke Oven Battery, in spite of having single set oven machinery with a high failure index as well as a heat top tendency. The stated method provides for scheduled downtime of up to two hours for machinery maintenance purposes, periods of empty ovens for decarbonization and production loss recovery capability, while observing lower limits and uniformity of coking time.

Henriquez, B. [Compania Siderurgica Huachipato S.A., Talcahuano (Chile)

1996-12-31T23:59:59.000Z

87

Method of saccharifying cellulose  

DOE Patents [OSTI]

A method of saccharifying cellulose by incubation with the cellulase of Clostridium thermocellum in a broth containing an efficacious amount of a reducing agent. Other incubation parameters which may be advantageously controlled to stimulate saccharification include the concentration of alkaline earth salts, pH, temperature, and duration. By the method of the invention, even native crystalline cellulose such as that found in cotton may be completely saccharified.

Johnson, Eric A. (Brookline, MA); Demain, Arnold L. (Wellesley, MA); Madia, Ashwin (Decatur, IL)

1985-09-10T23:59:59.000Z

88

Method of saccharifying cellulose  

DOE Patents [OSTI]

A method is disclosed of saccharifying cellulose by incubation with the cellulase of Clostridium thermocellum in a broth containing an efficacious amount of thiol reducing agent. Other incubation parameters which may be advantageously controlled to stimulate saccharification include the concentration of alkaline earth salts, pH, temperature, and duration. By the method of the invention, even native crystalline cellulose such as that found in cotton may be completely saccharified.

Johnson, E.A.; Demain, A.L.; Madia, A.

1983-05-13T23:59:59.000Z

89

Methods of forming steel  

DOE Patents [OSTI]

In one aspect, the invention encompasses a method of forming a steel. A metallic glass is formed and at least a portion of the glass is converted to a crystalline steel material having a nanocrystalline scale grain size. In another aspect, the invention encompasses another method of forming a steel. A molten alloy is formed and cooled the alloy at a rate which forms a metallic glass. The metallic glass is devitrified to convert the glass to a crystalline steel material having a nanocrystalline scale grain size. In yet another aspect, the invention encompasses another method of forming a steel. A first metallic glass steel substrate is provided, and a molten alloy is formed over the first metallic glass steel substrate to heat and devitrify at least some of the underlying metallic glass of the substrate.

Branagan, Daniel J. (Iona, ID); Burch, Joseph V. (Shelley, ID)

2001-01-01T23:59:59.000Z

90

Actinide extraction methods  

DOE Patents [OSTI]

Methods of separating actinides from lanthanides are disclosed. A regio-specific/stereo-specific dithiophosphinic acid having organic moieties is provided in an organic solvent that is then contacted with an acidic medium containing an actinide and a lanthanide. The method can extend to separating actinides from one another. Actinides are extracted as a complex with the dithiophosphinic acid. Separation compositions include an aqueous phase, an organic phase, dithiophosphinic acid, and at least one actinide. The compositions may include additional actinides and/or lanthanides. A method of producing a dithiophosphinic acid comprising at least two organic moieties selected from aromatics and alkyls, each moiety having at least one functional group is also disclosed. A source of sulfur is reacted with a halophosphine. An ammonium salt of the dithiophosphinic acid product is precipitated out of the reaction mixture. The precipitated salt is dissolved in ether. The ether is removed to yield the dithiophosphinic acid.

Peterman, Dean R. (Idaho Falls, ID) [Idaho Falls, ID; Klaehn, John R. (Idaho Falls, ID) [Idaho Falls, ID; Harrup, Mason K. (Idaho Falls, ID) [Idaho Falls, ID; Tillotson, Richard D. (Moore, ID) [Moore, ID; Law, Jack D. (Pocatello, ID) [Pocatello, ID

2010-09-21T23:59:59.000Z

91

Method of grid generation  

DOE Patents [OSTI]

The present invention provides a method of grid generation that uses the geometry of the problem space and the governing relations to generate a grid. The method can generate a grid with minimized discretization errors, and with minimal user interaction. The method of the present invention comprises assigning grid cell locations so that, when the governing relations are discretized using the grid, at least some of the discretization errors are substantially zero. Conventional grid generation is driven by the problem space geometry; grid generation according to the present invention is driven by problem space geometry and by governing relations. The present invention accordingly can provide two significant benefits: more efficient and accurate modeling since discretization errors are minimized, and reduced cost grid generation since less human interaction is required.

Barnette, Daniel W. (Veguita, NM)

2002-01-01T23:59:59.000Z

92

Unorthodox theoretical methods  

SciTech Connect (OSTI)

The use of the ReaxFF force field to correlate with NMR mobilities of amine catalytic substituents on a mesoporous silica nanosphere surface is considered. The interfacing of the ReaxFF force field within the Surface Integrated Molecular Orbital/Molecular Mechanics (SIMOMM) method, in order to replicate earlier SIMOMM published data and to compare with the ReaxFF data, is discussed. The development of a new correlation consistent Composite Approach (ccCA) is presented, which incorporates the completely renormalized coupled cluster method with singles, doubles and non-iterative triples corrections towards the determination of heats of formations and reaction pathways which contain biradical species.

Nedd, Sean

2012-06-20T23:59:59.000Z

93

Biomass treatment method  

DOE Patents [OSTI]

A method for treating biomass was developed that uses an apparatus which moves a biomass and dilute aqueous ammonia mixture through reaction chambers without compaction. The apparatus moves the biomass using a non-compressing piston. The resulting treated biomass is saccharified to produce fermentable sugars.

Friend, Julie (Claymont, DE); Elander, Richard T. (Evergreen, CO); Tucker, III; Melvin P. (Lakewood, CO); Lyons, Robert C. (Arvada, CO)

2010-10-26T23:59:59.000Z

94

INTRODUCTION CURRENT METHODS  

E-Print Network [OSTI]

membrane, leaving salt and contaminants behind. Another common method of desalination is vacuum distillation, in which water is separated from salt and other contaminants based on the fact that water and leave behind the brine from the salt water, thereby purifying potable water. Presently, the major

Auerbach, Scott M.

95

Sampling system and method  

DOE Patents [OSTI]

The present disclosure provides an apparatus and method for coupling conduit segments together. A first pump obtains a sample and transmits it through a first conduit to a reservoir accessible by a second pump. The second pump further conducts the sample from the reservoir through a second conduit.

Decker, David L.; Lyles, Brad F.; Purcell, Richard G.; Hershey, Ronald Lee

2013-04-16T23:59:59.000Z

96

Heart imaging method  

DOE Patents [OSTI]

A method for providing an image of the human heart's electrical system derives time-of-flight data from an array of EKG electrodes and this data is transformed into phase information. The phase information, treated as a hologram, is reconstructed to provide an image in one or two dimensions of the electrical system of the functioning heart.

Collins, H. Dale (Richland, WA); Gribble, R. Parks (Richland, WA); Busse, Lawrence J. (Littleton, CO)

1991-01-01T23:59:59.000Z

97

Cooling load estimation methods  

SciTech Connect (OSTI)

Ongoing research on quantifying the cooling loads in residential buildings, particularly buildings with passive solar heating systems, is described. Correlations are described that permit auxiliary cooling estimates from monthly average insolation and weather data. The objective of the research is to develop a simple analysis method, useful early in design, to estimate the annual cooling energy required of a given building.

McFarland, R.D.

1984-01-01T23:59:59.000Z

98

Cold isopressing method  

DOE Patents [OSTI]

A cold isopressing method in which two or more layers of material are formed within an isopressing mold. One of the layers consists of a tape-cast film. The layers are isopressed within the isopressing mold, thereby to laminate the layers and to compact the tape-cast film. The isopressing mold can be of cylindrical configuration with the layers being coaxial cylindrical layers. The materials used in forming the layers can contain green ceramic materials and the resultant structure can be fired and sintered as necessary and in accordance with known methods to produce a finished composite, ceramic structure. Further, such green ceramic materials can be of the type that are capable of conducting hydrogen or oxygen ions at high temperature with the object of utilizing the finished composite ceramic structure as a ceramic membrane element.

Chen, Jack C. (Getzville, NY); Stawisuck, Valerie M. (North Tonawanda, NY); Prasad, Ravi (East Amherst, NY)

2003-01-01T23:59:59.000Z

99

Ion sensing method  

DOE Patents [OSTI]

The present invention allows the determination of trace levels of ionic substances in a sample solution (ions, metal ions, and other electrically charged molecules) by coupling a separation method, such as liquid chromatography, with ion selective electrodes (ISE) prepared so as to allow detection at activities below 10.sup.-6 M. The separation method distributes constituent molecules into fractions due to unique chemical and physical properties, such as charge, hydrophobicity, specific binding interactions, or movement in an electrical field. The separated fractions are detected by means of the ISE(s). These ISEs can be used singly or in an array. Accordingly, modifications in the ISEs are used to permit detection of low activities, specifically, below 10.sup.-6 M, by using low activities of the primary analyte (the molecular species which is specifically detected) in the inner filling solution of the ISE. Arrays constructed in various ways allow flow-through sensing for multiple ions.

Smith, Richard Harding; Martin, Glenn Brian

2004-05-18T23:59:59.000Z

100

Die singulation method  

DOE Patents [OSTI]

A method is disclosed for singulating die from a semiconductor substrate (e.g. a semiconductor-on-insulator substrate or a bulk silicon substrate) containing an oxide layer (e.g. silicon dioxide or a silicate glass) and one or more semiconductor layers (e.g. monocrystalline or polycrystalline silicon) located above the oxide layer. The method etches trenches through the substrate and through each semiconductor layer about the die being singulated, with the trenches being offset from each other around at least a part of the die so that the oxide layer between the trenches holds the substrate and die together. The trenches can be anisotropically etched using a Deep Reactive Ion Etching (DRIE) process. After the trenches are etched, the oxide layer between the trenches can be etched away with a HF etchant to singulate the die. A release fixture can be located near one side of the substrate to receive the singulated die.

Swiler, Thomas P [Albuquerque, NM; Garcia, Ernest J [Albuquerque, NM; Francis, Kathryn M [Rio Rancho, NM

2014-01-07T23:59:59.000Z

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Die singulation method  

DOE Patents [OSTI]

A method is disclosed for singulating die from a semiconductor substrate (e.g. a semiconductor-on-insulator substrate or a bulk silicon substrate) containing an oxide layer (e.g. silicon dioxide or a silicate glass) and one or more semiconductor layers (e.g. monocrystalline or polycrystalline silicon) located above the oxide layer. The method etches trenches through the substrate and through each semiconductor layer about the die being singulated, with the trenches being offset from each other around at least a part of the die so that the oxide layer between the trenches holds the substrate and die together. The trenches can be anisotropically etched using a Deep Reactive Ion Etching (DRIE) process. After the trenches are etched, the oxide layer between the trenches can be etched away with an HF etchant to singulate the die. A release fixture can be located near one side of the substrate to receive the singulated die.

Swiler, Thomas P.; Garcia, Ernest J.; Francis, Kathryn M.

2013-06-11T23:59:59.000Z

102

Biological tracer method  

DOE Patents [OSTI]

The present invention is a biological tracer method for characterizing the movement of a material through a medium, comprising the steps of: introducing a biological tracer comprising a microorganism having ice nucleating activity into a medium; collecting at least one sample of the medium from a point removed from the introduction point; and analyzing the sample for the presence of the biological tracer. The present invention is also a method for using a biological tracer as a label for material identification by introducing a biological tracer having ice nucleating activity into a material, collecting a sample of a portion of the labelled material and analyzing the sample for the presence of the biological tracer. 2 figs.

Strong-Gunderson, J.M.; Palumbo, A.V.

1998-09-15T23:59:59.000Z

103

Biological tracer method  

DOE Patents [OSTI]

The present invention is a biological tracer method for characterizing the movement of a material through a medium, comprising the steps of: introducing a biological tracer comprising a microorganism having ice nucleating activity into a medium; collecting at least one sample of the medium from a point removed from the introduction point; and analyzing the sample for the presence of the biological tracer. The present invention is also a method for using a biological tracer as a label for material identification by introducing a biological tracer having ice nucleating activity into a material, collecting a sample of a portion of the labelled material and analyzing the sample for the presence of the biological tracer.

Strong-Gunderson, Janet M. (Ten Mile, TN); Palumbo, Anthony V. (Oak Ridge, TN)

1998-01-01T23:59:59.000Z

104

Vapor spill monitoring method  

DOE Patents [OSTI]

Method for continuous sampling of liquified natural gas effluent from a spill pipe, vaporizing the cold liquified natural gas, and feeding the vaporized gas into an infrared detector to measure the gas composition. The apparatus utilizes a probe having an inner channel for receiving samples of liquified natural gas and a surrounding water jacket through which warm water is flowed to flash vaporize the liquified natural gas.

Bianchini, Gregory M. (Livermore, CA); McRae, Thomas G. (Livermore, CA)

1985-01-01T23:59:59.000Z

105

Method of casting aerogels  

DOE Patents [OSTI]

The invention describes a method for making monolithic castings of transparent silica aerogel with densities in the range from 0.001 g/cm.sup.3 to 0.6 g/cm.sup.3. Various shapes of aerogels are cast in flexible polymer molds which facilitate removal and eliminate irregular surfaces. Mold dimensions are preselected to account for shrinkage of alcogel which occurs during the drying step of supercritical extraction of solvent.

Poco, John F. (Livermore, CA)

1993-01-01T23:59:59.000Z

106

Method of casting aerogels  

DOE Patents [OSTI]

The invention describes a method for making monolithic castings of transparent silica aerogel with densities in the range from 0.001 g/cm[sup 3] to 0.6 g/cm[sup 3]. Various shapes of aerogels are cast in flexible polymer molds which facilitate removal and eliminate irregular surfaces. Mold dimensions are preselected to account for shrinkage of aerogel which occurs during the drying step of supercritical extraction of solvent. 2 figures.

Poco, J.F.

1993-09-07T23:59:59.000Z

107

Method for detecting biomolecules  

DOE Patents [OSTI]

A method for detecting and measuring the concentration of biomolecules in solution, utilizing a conducting electrode in contact with a solution containing target biomolecules, with a film with controllable pore size distribution characteristics applied to at least one surface of the conducting electrode. The film is functionalized with probe molecules that chemically interact with the target biomolecules at the film surface, blocking indicator molecules present in solution from diffusing from the solution to the electrode, thereby changing the electrochemical response of the electrode

Huo, Qisheng (Albuquerque, NM); Liu, Jun (Albuquerque, NM)

2008-08-12T23:59:59.000Z

108

Method for scavenging mercury  

DOE Patents [OSTI]

Disclosed herein is a method for removing mercury from a gas stream comprising contacting the gas stream with a getter composition comprising bromine, bromochloride, sulphur bromide, sulphur dichloride or sulphur monochloride and mixtures thereof. In one preferred embodiment the getter composition is adsorbed onto a sorbent. The sorbent may be selected from the group consisting of flyash, limestone, lime, calcium sulphate, calcium sulfite, activated carbon, charcoal, silicate, alumina and mixtures thereof. Preferred is flyash, activated carbon and silica.

Chang, Shih-ger (El Cerrito, CA); Liu, Shou-heng (Kaohsiung, TW); Liu, Zhao-rong (Beijing, CN); Yan, Naiqiang (Berkeley, CA)

2009-01-20T23:59:59.000Z

109

Method for scavenging mercury  

DOE Patents [OSTI]

Disclosed herein is a method for removing mercury from a gas stream comprising contacting the gas stream with a getter composition comprising bromine, bromochloride, sulphur bromide, sulphur dichloride or sulphur monochloride and mixtures thereof. In one preferred embodiment the getter composition is adsorbed onto a sorbent. The sorbent may be selected from the group consisting of flyash, limestone, lime, calcium sulphate, calcium sulfite, activated carbon, charcoal, silicate, alumina and mixtures thereof. Preferred is flyash, activated carbon and silica.

Chang, Shih-Ger (El Cerrito, CA); Liu, Shou-Heng (Kaohsiung, TW); Liu, Zhao-Rong (Beijing, CN); Yan, Naiqiang (Berkeley, CA)

2011-08-30T23:59:59.000Z

110

Method for scavenging mercury  

DOE Patents [OSTI]

Disclosed herein is a method for removing mercury from a gas stream comprising contacting the gas stream with a getter composition comprising bromine, bromochloride, sulphur bromide, sulphur dichloride or sulphur monochloride and mixtures thereof. In one preferred embodiment the getter composition is adsorbed onto a sorbent. The sorbent may be selected from the group consisting flyash, limestone, lime, calcium sulphate, calcium sulfite, activated carbon, charcoal, silicate, alumina and mixtures thereof. Preferred is flyash, activated carbon and silica.

Chang, Shih-ger (El Cerrito, CA); Liu, Shou-heng (Kaohsiung, TW); Liu, Zhao-rong (Bejing, CN); Yan, Naiqiang (Burkeley, CA)

2010-07-13T23:59:59.000Z

111

Innovative sludge stabilization method  

SciTech Connect (OSTI)

Sludge is generated in many water and wastewater treatment processes, both biological and physical/chemical. Examples include biological sludges from sanitary and industrial wastewater treatment operations and chemical sludges such as those produced when metals are removed from metal plating wastewater. Even some potable water plants produce sludge, such as when alum is used as a flocculating agent to clarify turbid water. Because sludge is produced from such a variety of operations, different techniques have been developed to remove water from sludges and reduce the sludge volume and mass, thus making the sludge more suitable for recovery or disposal. These techniques include mechanical (e.g., filter presses), solar (sludge drying beds), and thermal. The least expensive of these methods, neglecting land costs, involves sludge drying beds and lagoons. The solar method was widely used in sewage treatment plants for many years, but has fallen in disfavor in the US; mechanical and thermal methods have been preferred. Since environmental remediation often requires managing sludges, this article presents a discussion of a variation of sludge lagoons known as evaporative sludge stabilization. Application of this process to the closure of two 2.5 acre (10117 m{sup 2}) hazardous waste surface impoundments will be discussed. 1 ref., 2 figs.

Riggenbach, J.D.

1995-06-01T23:59:59.000Z

112

Hydraulic mining method  

DOE Patents [OSTI]

A method of hydraulically mining an underground pitched mineral vein comprising drilling a vertical borehole through the earth's lithosphere into the vein and drilling a slant borehole along the footwall of the vein to intersect the vertical borehole. Material is removed from the mineral vein by directing a high pressure water jet thereagainst. The resulting slurry of mineral fragments and water flows along the slant borehole into the lower end of the vertical borehole from where it is pumped upwardly through the vertical borehole to the surface.

Huffman, Lester H. (Kent, WA); Knoke, Gerald S. (Kent, WA)

1985-08-20T23:59:59.000Z

113

Method for welding beryllium  

DOE Patents [OSTI]

A method is provided for joining beryllium pieces which comprises: depositing aluminum alloy on at least one beryllium surface; contacting that beryllium surface with at least one other beryllium surface; and welding the aluminum alloy coated beryllium surfaces together. The aluminum alloy may be deposited on the beryllium using gas metal arc welding. The aluminum alloy coated beryllium surfaces may be subjected to elevated temperatures and pressures to reduce porosity before welding the pieces together. The aluminum alloy coated beryllium surfaces may be machined into a desired welding joint configuration before welding. The beryllium may be an alloy of beryllium or a beryllium compound. The aluminum alloy may comprise aluminum and silicon.

Dixon, Raymond D. (Los Alamos, NM); Smith, Frank M. (Espanola, NM); O'Leary, Richard F. (Los Alamos, NM)

1997-01-01T23:59:59.000Z

114

Brush Management Methods  

E-Print Network [OSTI]

such junipers and deposition as oaks mesquite on sand- clay loams Grazon ET, Controls most species 5+ May temporarily in- Crossbow, except junipers and jure grasses in imme- Diesel lime pricklyash diate area of woody (basal bark plant, depending on application... vegetation caused by disking make the method most applicable to deep soils that can be seeded. Chaining Chaining is used to knock down and thin moderate to thick stands of brush (Figure 9). Chaining alone gives only temporary control. It is most effective...

Welch, Tommy G.

2000-07-14T23:59:59.000Z

115

Method of joining ceramics  

DOE Patents [OSTI]

According to the method of the present invention, joining a first bi-element carbide to a second bi-element carbide, has the steps of: (a) forming a bond agent containing a metal carbide and silicon; (b) placing the bond agent between the first and second bi-element carbides to form a pre-assembly; and (c) pressing and heating the pre-assembly in a non-oxidizing atmosphere to a temperature effective to induce a displacement reaction creating a metal silicon phase bonding the first and second bi-element carbides.

Henager, Jr., Charles H. (Kennewick, WA); Brimhall, John L. (West Richland, WA)

2000-01-01T23:59:59.000Z

116

Method for resonant measurement  

DOE Patents [OSTI]

A method of measurement of objects to determine object flaws, Poisson's ratio (.sigma.) and shear modulus (.mu.) is shown and described. First, the frequency for expected degenerate responses is determined for one or more input frequencies and then splitting of degenerate resonant modes are observed to identify the presence of flaws in the object. Poisson's ratio and the shear modulus can be determined by identification of resonances dependent only on the shear modulus, and then using that shear modulus to find Poisson's ratio using other modes dependent on both the shear modulus and Poisson's ratio.

Rhodes, George W. (5201 Rio Grande Blvd., N.W., Albuquerque, NM 87107); Migliori, Albert (Rte. 4, Box 258 Tano Rd., Sante Fe, NM 87501); Dixon, Raymond D. (396 Connie Ave., White Rock, NM 87544)

1996-01-01T23:59:59.000Z

117

Method of drying articles  

DOE Patents [OSTI]

A method of drying a green particulate article includes the steps of: a. Providing a green article which includes a particulate material and a pore phase material, the pore phase material including a solvent; and b. contacting the green article with a liquid desiccant for a period of time sufficient to remove at least a portion of the solvent from the green article, the pore phase material acting as a semipermeable barrier to allow the solvent to be sorbed into the liquid desiccant, the pore phase material substantially preventing the liquid desiccant from entering the pores.

Janney, Mark A. (Knoxville, TN); Kiggans, Jr., James O. (Oak Ridge, TN)

1999-01-01T23:59:59.000Z

118

Method of drying articles  

DOE Patents [OSTI]

A method of drying a green particulate article includes the steps of: (a) Providing a green article which includes a particulate material and a pore phase material, the pore phase material including a solvent; and (b) contacting the green article with a liquid desiccant for a period of time sufficient to remove at least a portion of the solvent from the green article, the pore phase material acting as a semipermeable barrier to allow the solvent to be sorbed into the liquid desiccant, the pore phase material substantially preventing the liquid desiccant from entering the pores. 3 figs.

Janney, M.A.; Kiggans, J.O. Jr.

1999-03-23T23:59:59.000Z

119

Construction Material And Method  

DOE Patents [OSTI]

A structural material of a polystyrene base and the reaction product of the polystyrene base and a solid phosphate ceramic. The ceramic is applied as a slurry which includes one or more of a metal oxide or a metal hydroxide with a source of phosphate to produce a phosphate ceramic and a poly (acrylic acid or acrylate) or combinations or salts thereof and polystyrene or MgO applied to the polystyrene base and allowed to cure so that the dried aqueous slurry chemically bonds to the polystyrene base. A method is also disclosed of applying the slurry to the polystyrene base.

Wagh, Arun S. (Orland Park, IL); Antink, Allison L. (Bolingbrook, IL)

2006-02-21T23:59:59.000Z

120

Methods of making monolayers  

DOE Patents [OSTI]

The invention pertains to methods of forming monolayers on various surfaces. The surfaces can be selected from a wide array of materials, including, for example, aluminum dioxide, silicon dioxide, carbon and SiC. The substrates can be planar or porous. The monolayer is formed under enhanced pressure conditions. The monolayer contains functionalized molecules, and accordingly functionalizes a surface of the substrate. The properties of the functionalized substrate can enhance the substrate's applicability for numerous purposes including, for example, utilization in extracting contaminants, or incorporation into a polymeric matrix.

Alford, Kentin L. (Pasco, WA); Simmons, Kevin L. (Kennewick, WA); Samuels, William D. (Richland, WA); Zemanian, Thomas S. (Richland, WA); Liu, Jun (Albuquerque, NM); Shin, Yongsoon (Richland, WA); Fryxell, Glen E. (Kennewick, WA)

2009-12-08T23:59:59.000Z

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Method for producing hydrogen  

SciTech Connect (OSTI)

In a method for producing high quality hydrogen, the carbon monoxide level of a hydrogen stream which also contains hydrogen sulfide is shifted in a bed of iron oxide shift catalyst to a desired low level of carbon monoxide using less catalyst than the minimum amount of catalyst which would otherwise be required if there were no hydrogen sulfide in the gas stream. Under normal operating conditions the presence of even relatively small amounts of hydrogen sulfide can double the activity of the catalyst such that much less catalyst may be used to do the same job.

Preston, J.L.

1980-02-26T23:59:59.000Z

122

Control system design method  

DOE Patents [OSTI]

A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

Wilson, David G. (Tijeras, NM); Robinett, III, Rush D. (Tijeras, NM)

2012-02-21T23:59:59.000Z

123

Computational Physics and Methods  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New SubstationCleanCommunity2 Computational Physics and Methods Performing innovative

124

Method for forming materials  

DOE Patents [OSTI]

A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

Tolle, Charles R. (Idaho Falls, ID); Clark, Denis E. (Idaho Falls, ID); Smartt, Herschel B. (Idaho Falls, ID); Miller, Karen S. (Idaho Falls, ID)

2009-10-06T23:59:59.000Z

125

Tensiometer methods and apparatus  

DOE Patents [OSTI]

A method for collecting data regarding a matric potential of a media includes providing a tensiometer having a stainless steel tensiometer casing, the stainless steel tensiometer casing comprising a tip portion which includes a wetted porous stainless steel membrane through which a matric potential of a media is sensed; driving the tensiometer into the media using an insertion tube comprising a plurality of probe casing which are selectively coupled to form the insertion tube as the tensiometer is progressively driven deeper into the media, wherein the wetted porous stainless steel membrane is in contact with the media; and sensing the matric potential the media exerts on the wetted porous stainless steel membrane by a pressure sensor in fluid hydraulic connection with the porous stainless steel membrane. A tensiometer includes a stainless steel casing.

Grover, Blair K.; Hubbell, Joel M.; Sisson, James B.; Casper, William L.

2004-08-10T23:59:59.000Z

126

Freeze drying method  

SciTech Connect (OSTI)

The present invention provides methods and apparatus for freeze drying in which a solution, which can be a radioactive salt dissolved within an acid, is frozen into a solid on vertical plates provided within a freeze drying chamber. The solid is sublimated into vapor and condensed in a cold condenser positioned above the freeze drying chamber and connected thereto by a conduit. The vertical positioning of the cold condenser relative to the freeze dryer helps to help prevent substances such as radioactive materials separated from the solution from contaminating the cold condenser. Additionally, the system can be charged with an inert gas to produce a down rush of gas into the freeze drying chamber to also help prevent such substances from contaminating the cold condenser.

Coppa, Nicholas V. (Malvern, PA); Stewart, Paul (Youngstown, NY); Renzi, Ernesto (Youngstown, NY)

1999-01-01T23:59:59.000Z

127

Error detection method  

DOE Patents [OSTI]

An apparatus, program product, and method that run an algorithm on a hardware based processor, generate a hardware error as a result of running the algorithm, generate an algorithm output for the algorithm, compare the algorithm output to another output for the algorithm, and detect the hardware error from the comparison. The algorithm is designed to cause the hardware based processor to heat to a degree that increases the likelihood of hardware errors to manifest, and the hardware error is observable in the algorithm output. As such, electronic components may be sufficiently heated and/or sufficiently stressed to create better conditions for generating hardware errors, and the output of the algorithm may be compared at the end of the run to detect a hardware error that occurred anywhere during the run that may otherwise not be detected by traditional methodologies (e.g., due to cooling, insufficient heat and/or stress, etc.).

Olson, Eric J.

2013-06-11T23:59:59.000Z

128

Method for welding beryllium  

DOE Patents [OSTI]

A method is provided for joining beryllium pieces which comprises: depositing aluminum alloy on at least one beryllium surface; contacting that beryllium surface with at least one other beryllium surface; and welding the aluminum alloy coated beryllium surfaces together. The aluminum alloy may be deposited on the beryllium using gas metal arc welding. The aluminum alloy coated beryllium surfaces may be subjected to elevated temperatures and pressures to reduce porosity before welding the pieces together. The aluminum alloy coated beryllium surfaces may be machined into a desired welding joint configuration before welding. The beryllium may be an alloy of beryllium or a beryllium compound. The aluminum alloy may comprise aluminum and silicon. 9 figs.

Dixon, R.D.; Smith, F.M.; O`Leary, R.F.

1997-04-01T23:59:59.000Z

129

Hydroforming device and method  

DOE Patents [OSTI]

An apparatus (10, 110) and method to form a workpiece (32, 132) into a useful product (28, 128) using a pressurized fluid (14), also termed as "hydroforming". The workpiece may be a tube or may be one or a plurality of sheets of a material. The apparatus has a chamber (12) adapted to contain a quantity of a fluid, a hydroforming means positioned within the chamber, and means for substantially immersing the workpiece in the fluid before, during and after the hydroforming operation. Dies (16, 18) enclose the workpiece and provide a cavity of desired shape against which the workpiece is expanded by the pressurized fluid. The chamber may be open or closed to the atmosphere during operation and the fluid temperature and/or level may be controlled.

Guza, David E. (Powell, OH)

2007-09-11T23:59:59.000Z

130

Thermal Recovery Methods  

SciTech Connect (OSTI)

Thermal Recovery Methods describes the basic concepts of thermal recovery and explains the injection patterns used to exploit reservoir conditions. Basic reservoir engineering is reviewed with an emphasis on changes in flow characteristics caused by temperature. The authors discuss an energy balance for steam and combustion drive, and they explain in situ reactions. Heat loss, combustion drive, and steam displacement also are examined in detail, as well as cyclic steam injection, downhole ignition, well heating, and low-temperature oxidation. Contents: Thermal processes; Formation and reservoir evaluations; Well patterns and spacing; Flow and process equations; Laboratory simulation of thermal recovery; Heat loss and transmission; Displacement and production; Equipment; Basic data for field selection; Laboratory evaluation of combustion characteristics; Thermal properties of reservoirs and fluids.

White, P.D.; Moss, J.T.

1983-01-01T23:59:59.000Z

131

Magnesium fluoride recovery method  

DOE Patents [OSTI]

A method of obtaining magnesium fluoride substantially free from radioactive uranium from a slag containing the same and having a radioactivity level of at least about 7000 pCi/gm. The slag is ground to a particle size of about 200 microns or less. The ground slag is contacted with an acid under certain prescribed conditions to produce a liquid product and a particulate solid product. The particulate solid product is separated from the liquid and treated at least two more times with acid to produce a solid residue consisting essentially of magnesium fluoride substantially free of uranium and having a residual radioactivity level of less than about 1000 pCi/gm. In accordance with a particularly preferred embodiment of the invention a catalyst and an oxidizing agent are used during the acid treatment and preferably the acid is sulfuric acid having a strength of about 1.0 Normal.

Gay, Richard L. (Canoga Park, CA); McKenzie, Donald E. (Woodland Hills, CA)

1989-01-01T23:59:59.000Z

132

Floating Silicon Method  

SciTech Connect (OSTI)

The Floating Silicon Method (FSM) project at Applied Materials (formerly Varian Semiconductor Equipment Associates), has been funded, in part, by the DOE under a “Photovoltaic Supply Chain and Cross Cutting Technologies” grant (number DE-EE0000595) for the past four years. The original intent of the project was to develop the FSM process from concept to a commercially viable tool. This new manufacturing equipment would support the photovoltaic industry in following ways: eliminate kerf losses and the consumable costs associated with wafer sawing, allow optimal photovoltaic efficiency by producing high-quality silicon sheets, reduce the cost of assembling photovoltaic modules by creating large-area silicon cells which are free of micro-cracks, and would be a drop-in replacement in existing high efficiency cell production process thereby allowing rapid fan-out into the industry.

Kellerman, Peter

2013-12-21T23:59:59.000Z

133

Catalysts and method  

DOE Patents [OSTI]

An improved catlayst and method for the oxyhydrochlorination of methane is disclosed. The catalyst includes a pyrogenic porous support on which is layered as active material, cobalt chloride in major proportion, and minor proportions of an alkali metal chloride and of a rare earth chloride. On contact of the catalyst with a gas flow of methane, HC1 and oxygen, more than 60% of the methane is converted and of that converted more than 40% occurs as monochloromethane. Advantageously, the monochloromethane can be used to produce gasoline boiling range hydrocarbons with the recycle of HCl for further reaction. This catalyst is also of value for the production of formic acid as are analogous catalysts with lead, silver or nickel chlorides substituted for the cobalt chloride.

Taylor, Charles E. (Pittsburgh, PA); Noceti, Richard P. (Pittsburgh, PA)

1991-01-01T23:59:59.000Z

134

Electrochemical catalyst recovery method  

DOE Patents [OSTI]

A method of recovering catalyst material from latent catalyst material solids includes: (a) combining latent catalyst material solids with a liquid acid anolyte solution and a redox material which is soluble in the acid anolyte solution to form a mixture; (b) electrochemically oxidizing the redox material within the mixture into a dissolved oxidant, the oxidant having a potential for oxidation which is effectively higher than that of the latent catalyst material; (c) reacting the oxidant with the latent catalyst material to oxidize the latent catalyst material into at least one oxidized catalyst species which is soluble within the mixture and to reduce the oxidant back into dissolved redox material; and (d) recovering catalyst material from the oxidized catalyst species of the mixture. The invention is expected to be particularly useful in recovering spent catalyst material from petroleum hydroprocessing reaction waste products having adhered sulfides, carbon, hydrocarbons, and undesired metals, and as well as in other industrial applications. 3 figs.

Silva, L.J.; Bray, L.A.

1995-05-30T23:59:59.000Z

135

Method of bonding  

DOE Patents [OSTI]

1. A method of making a fuel-containing structure for nuclear reactors, comprising providing an assembly comprising a plurality of fuel units; each fuel unit consisting of a core plate containing thermal-neutron-fissionable material, sheets of cladding metal on its bottom and top surfaces, said cladding sheets being of greater width and length than said core plates whereby recesses are formed at the ends and sides of said core plate, and end pieces and first side pieces of cladding metal of the same thickness as the core plate positioned in said recesses, the assembly further comprising a plurality of second side pieces of cladding metal engaging the cladding sheets so as to space the fuel units from one another, and a plurality of filler plates of an acid-dissolvable nonresilient material whose melting point is above 2000.degree. F., each filler plate being arranged between a pair of said second side pieces and the cladding plates of two adjacent fuel units, the filler plates having the same thickness as the second side pieces; the method further comprising enclosing the entire assembly in an envelope; evacuating the interior of the entire assembly through said envelope; applying inert gas under a pressure of about 10,000 psi to the outside of said envelope while at the same time heating the assembly to a temperature above the flow point of the cladding metal but below the melting point of any material of the assembly, whereby the envelope is pressed against the assembly and integral bonds are formed between plates, sheets, first side pieces, and end pieces and between the sheets and the second side pieces; slowly cooling the assembly to room temperature; removing the envelope; and dissolving the filler plates without attacking the cladding metal.

Saller, deceased, Henry A. (late of Columbus, OH); Hodge, Edwin S. (Columbus, OH); Paprocki, Stanley J. (Columbus, OH); Dayton, Russell W. (Columbus, OH)

1987-12-01T23:59:59.000Z

136

Variable metric conjugate gradient methods  

SciTech Connect (OSTI)

1.1 Motivation. In this paper we present a framework that includes many well known iterative methods for the solution of nonsymmetric linear systems of equations, Ax = b. Section 2 begins with a brief review of the conjugate gradient method. Next, we describe a broader class of methods, known as projection methods, to which the conjugate gradient (CG) method and most conjugate gradient-like methods belong. The concept of a method having either a fixed or a variable metric is introduced. Methods that have a metric are referred to as either fixed or variable metric methods. Some relationships between projection methods and fixed (variable) metric methods are discussed. The main emphasis of the remainder of this paper is on variable metric methods. In Section 3 we show how the biconjugate gradient (BCG), and the quasi-minimal residual (QMR) methods fit into this framework as variable metric methods. By modifying the underlying Lanczos biorthogonalization process used in the implementation of BCG and QMR, we obtain other variable metric methods. These, we refer to as generalizations of BCG and QMR.

Barth, T.; Manteuffel, T.

1994-07-01T23:59:59.000Z

137

arXiv:0803.4162v2[nucl-ex]1Feb2009 High sensitivity measurement of 224  

E-Print Network [OSTI]

, for a 275 tonne D2O assay, which are equivalent to 4Ă?10-16 g Th/g and 3Ă?10-16 g U/g in heavy water. Key scintillation 1. Introduction SNO is a heavy water Cherenkov detector sit- uated at a depth of about 2100 m 2001), salt (May 2001 to September 2003) when 2 tonnes of NaCl were added to the heavy water to improve

138

0306-4549(94)E0007-Z Ann. Nucl. Energy.Vol. 21, No. 7, pp. 433-439, 1994  

E-Print Network [OSTI]

-backward model in criticality calculations), the observation of * Permanent address: Chemical and Nuclear SLAB CRITICALITY EIGENVALUE LIMITS IN A DISCRETE ANGLE MODEL ANIL K. PRINJA* and IMRE PAZSIT Department- pling between 121 and 122 the critical eigenvalue condition is shown to degenerate

Pázsit, Imre

139

arXiv:0802.3463v1[nucl-th]23Feb2008 Nuclear astrophysics from direct reactions  

E-Print Network [OSTI]

, and energy production in stars. A. Nuclear reaction rates Low energy nuclear astrophysics requires the knowl Be(p, ) 8 B plays a major role for the production of high energy neutrinos from the -decay of 8 B Department of Physics, Texas A&M University, Commerce, TX 75429, USA Accurate nuclear reaction rates

Bertulani, Carlos A. - Department of Physics and Astronomy, Texas A&M University

140

arXiv:0810.4979v1[nucl-ex]28Oct2008 Energy and system size dependence of  

E-Print Network [OSTI]

+Cu and Au+Au collisions B.I. Abelev i , M.M. Aggarwal ae , Z. Ahammed au , B.D. Anderson s , D. Arkhipkin m

Llope, William J.

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

arXiv:nucl-th/0109084v128Sep2001 Parity-Violating Interaction Effects I: the Longitudinal  

E-Print Network [OSTI]

in pp Elastic Scattering J. Carlson Theoretical Division, Los Alamos National Laboratory, Los Alamos Institute of Technology, Cambridge, MA 02139 and Department of Physics, University of Maryland, College Park, MD 20742 B.F. Gibson Theoretical Division, Los Alamos National Laboratory, Los Alamos, New Mexico

142

Ann. Nucl Energ)>Vol. 23, No. 4/5, pp. 407412, 1996 Copyright 0 1996 Elsevier Science Ltd  

E-Print Network [OSTI]

) (Thie, 1963; Uhrig, 1970; Ash, 1979; Bell and Glasstone, 1970), is nevertheless totally ignored the solution of (6)-(7) in the form (Ash, 1979; Bell and Glasstone, 1970) n(w) = Q(w)Gu(w) where G, (w

Pázsit, Imre

143

J Nucl Med . Author manuscript Impact of tumor size and tracer uptake heterogeneity in (18)F-FDG PET and  

E-Print Network [OSTI]

in (18)F-FDG PET and CT non-small cell lung cancer tumor delineation Mathieu Hatt 1 * , Catherine Cheze@univ-brest.fr > Abstract The objectives of this study were to investigate the relationship between CT and 18F-FDG PET based tumor volumes in NSCLC and the impact of tumor size and uptake heterogeneity on various PET uptake

Paris-Sud XI, Université de

144

arXiv:nucl-th/001006218Oct2000 Electromagnetic Structure of Few-Nucleon Systems: a Critical Review  

E-Print Network [OSTI]

in predicting a number of nuclear properties for systems with mass number A 8, including energy spectra of low-lying states, electromagnetic form factors, and low-energy capture reactions. 2. Interactions and Energy, including energy spectra, electromagnetic form factors, and capture reactions, is critically reviewed within

Thomas Jefferson National Accelerator Facility

145

J Nucl Med . Author manuscript In vivo molecular imaging of atherosclerotic lesions in ApoE-/-mice using  

E-Print Network [OSTI]

in ApoE-/- mice using VCAM-1-specific, 99mTc-labeled peptidic sequences Julien Dimastromatteo 1 2 , Daniel Fagret 1 2 , Laurent M. Riou 1 2 * , Catherine Ghezzi 1 2 Grenoble 1 UJF, Universit Joseph Fourier induced by left carotid artery ligation in ApoE mice was used (n 82)./- - = Tc-B2702p and Tc-B2702p1 to Tc

Boyer, Edmond

146

arXiv:1101.3744v1[nucl-ex]19Jan2011 Measurement of 30  

E-Print Network [OSTI]

,1 J. Robinson,3 G. Rosner,3 T. Rostomyan,11 S. Schumann,2, 5 M. H. Sikora,8 D. Sober,16 I. Supek,15 resonance region consists of three pairs of N and two pairs of (assuming the existence of the one

Krusche, Bernd

147

Generalized Multicoincidence Analysis Methods  

SciTech Connect (OSTI)

The ability to conduct automated trace radionuclide analysis at or near the sample collection point would provide a valuable tool for emergency response, nuclear forensics and environmental monitoring. Pacific Northwest National Laboratory is developing systems for this purpose based on dual gamma-ray spectrometers, e.g. NaI(TI) or HPGe, combined with thin organic scintillator sensors to detect light charged particles. Translating the coincident signatures recorded by these systems, which include , and , into the concentration of detectable radionuclides in the sample requires generalized multicoincidence analysis tools. The development and validation of the Coincidence Lookup Library, which currently contains the probabilities of single and coincidence signatures from more than 420 isotopes, is described. Also discussed is a method to calculate the probability of observing a coincidence signature which incorporates true coincidence summing effects. These effects are particularly important for high-geometric-efficiency detection systems. Finally, a process for validating the integrated analysis software package is demonstrated using GEANT 4 simulations of the prototype detector systems.

Warren, Glen A.; Smith, Leon E.; Aalseth, Craig E.; Ellis, J. E.; Valsan, Andrei B.; Mengesha, Wondwosen

2005-10-01T23:59:59.000Z

148

Bismuth generator method  

DOE Patents [OSTI]

A method for separating .sup.213 Bi from a solution of radionuclides wherein the solution contains a concentration of the chloride ions and hydrogen ions adjusted to allow the formation of a chloride complex. The solution is then brought into contact with an anion exchange resin, whereupon .sup.213 Bi is absorbed from the solution and adhered onto the anion exchange resin in the chloride complex. Other non-absorbing radionuclides such as .sup.225 Ra, .sup.225 Ac, and .sup.221 Fr, along with HCl are removed from the anion exchange resin with a scrub solution. The .sup.213 Bi is removed from the anion exchange resin by washing the anion exchange resin with a stripping solution free of chloride ions and with a reduced hydrogen ion concentration which breaks the chloride anionic complex, releasing the .sup.213 Bi as a cation. In a preferred embodiment of the present invention, the anion exchange resin is provided as a thin membrane, allowing for extremely rapid adherence and stripping of the .sup.213 Bi. A preferred stripping solution for purification of .sup.213 Bi for use in medical applications includes sodium acetate, pH 5.5. A protein conjugated with bifunctional chelating agents in vivo with the NaOAc, to receive the .sup.213 Bi as it is being released from the anion exchange resin.

Bray, Lane Allan (Richland, WA); DesChane, Jaquetta R. (Pasco, WA)

1998-01-01T23:59:59.000Z

149

Method of Separating Tangents  

E-Print Network [OSTI]

The well known Jensen inequality, holds true for every convex functions. However, we found that it is possible to apply it to some problems related to nonconvex functions for which Jensen's inequality holds true locally. Having considered a set of such functions, we noted some general patterns. We show that the key point, which provides Jensen's inequality holds true locally, is that the plot of function should be situated at only one side from the local base curve defined compatible with conditional variables. Moreover, we have achieved even more general result. It turned out that the graph of the function can be located on either sides of the local base curve, with the conditions. This result allows one to prove easily difficult types of inequalities, and on the other hand to broaden applications in physics, economy, and information theory. On the basis of the conducted analysis of different sources it is possible to claim, that our method is applicable to about three fourths of studied inequalities related to Jensen's inequality.

Adilsultan Lepes

2014-12-12T23:59:59.000Z

150

Method for biological purification  

DOE Patents [OSTI]

An apparatus is disclosed for containing a microorganism culture in an active exponential growth and delivering a supply of microorganisms to an environment containing wastes for bio-augmenting the biodegradation of the wastes. The apparatus comprises a bioreactor and an operably connected controller. The bioreactor has a bioreactor chamber for containing a supply of microorganisms, a second chamber for containing a supply of water and inorganic nutrients, and a third chamber for containing a supply of organic nutrients. The bioreactor is operably connected to the controller in which a first pump is operably connected in fluid communication between the bioreactor chamber and the second chamber and third chamber, and a second pump is operably connected in fluid communication between the bioreactor chamber and the environment containing wastes to be biodegraded. The controller further includes a timer and regulator operably connected to the first and second pumps to effectively maintain the microorganisms in exponential growth in the bioreactor chamber and to deliver microorganisms to an environment to be treated. Also, disclosed is a method for bio-augmenting the biodegradation of wastes.

Lucido, John A. (Mt. Sinai, NY); Keenan, Daniel (Rockville Centre, NY); Premuzic, Eugene T. (East Moriches, NY); Lin, Mow S. (Rocky Point, NY); Shelenkova, Ludmila (Yaphank, NY)

2001-03-27T23:59:59.000Z

151

Desulfurization apparatus and method  

DOE Patents [OSTI]

A method and system for desulfurization comprising first and second metal oxides; a walled enclosure having an inlet and an exhaust for the passage of gas to be treated; the first and second metal oxide being combinable with hydrogen sulfide to produce a reaction comprising a sulfide and water; the first metal oxide forming a first layer and the second metal oxide forming a second layer within the walled surroundings; the first and second layers being positioned so the first layer removes the bulk amount of the hydrogen sulfide from the treated gas prior to passage through the second layer, and the second layer removes substantially all of the remaining hydrogen sulfide from the treated gas; the first metal oxide producing a stoichiometrical capacity in excess of 500 mg sulfur/gram; the second metal oxide reacts with the hydrogen sulfide more favorably but has a stoichometrical capacity which is less than the first reactant; whereby the optimal amount by weight of the first and second metal oxides is achieved by utilizing two to three units by weight of the first metal oxide for every unit of the second metal oxide.

Rong, Charles; Jiang, Rongzhong; Chu, Deryn

2013-06-18T23:59:59.000Z

152

Chapter 1, Introduction: The Uniform Methods Project: Methods...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

SR-7A30-53827 April 2013 The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures 1 - 1 Chapter 1 - Table of Contents About the...

153

Methods of Purchasing Purchasing methods include the different  

E-Print Network [OSTI]

" purchases must be reviewed and approved by the Controller's Office. This may result in the end user beingMethods of Purchasing Purchasing methods include the different processes of ordering goods and/or services, and encumbering funds. #12;Method of Purchase Field Purchase Orders (FPO) Accepted

154

Method of microbially degrading trinitrotoluene  

DOE Patents [OSTI]

A method of degrading trinitrotoluene (TNT) includes contacting the TNT with intra-amoebic isolate CR-1, ATCC 75528.

Tyndall, Richard L. (Clinton, TN); Vass, Arpad (Oak Ridge, TN)

1996-01-01T23:59:59.000Z

155

Conjugate Gradient Method Numerisches Rechnen  

E-Print Network [OSTI]

Conjugate Gradient Method Numerisches Rechnen (für Informatiker) M. Grepl J. Berger & J.T. Frings Numerisches Rechnen #12;Conjugate Gradient Method The Quadratic Form Steepest Descent Conjugate Directions/Gradients IGPM, RWTH Aachen Numerisches Rechnen #12;Conjugate Gradient Method The Quadratic Form Steepest Descent

156

ANALYTICAL METHODS in CHEMICAL ECOLOGY  

E-Print Network [OSTI]

ANALYTICAL METHODS in CHEMICAL ECOLOGY a post graduate course (doktorandkurs) when: February 10 ­ 28, 2014 where: Chemical Ecology, Plant Protection Biology, Swedish University of Agriculture (SLU to modern analytical methods used in Chemical Ecological and Ecotoxicological research, such as: methods

157

Formal Methods Formalism vs. Verification  

E-Print Network [OSTI]

lights in the room are controlled by a switch" There exists a single switch that controls all lights For each light, there exists a unique switch that controls it #12;Lesser Formal Methods Be precise - Say methods", Computer 41(3), pp. 28-34, Jan 2010 #12;Formal methods are not really being used by industry

Feitelson, Dror

158

Method of making alkyl esters  

DOE Patents [OSTI]

Methods of making alkyl esters are described herein. The methods are capable of using raw, unprocessed, low-cost feedstocks and waste grease. Generally, the method involves converting a glyceride source to a fatty acid composition and esterifying the fatty acid composition to make alkyl esters. In an embodiment, a method of making alkyl esters comprises providing a glyceride source. The method further comprises converting the glyceride source to a fatty acid composition comprising free fatty acids and less than about 1% glyceride by mass. Moreover, the method comprises esterifying the fatty acid composition in the presence of a solid acid catalyst at a temperature ranging firm about 70.degree. C. to about 120.degree. C. to produce alkyl esters, such that at least 85% of the free fatty acids are converted to alkyl esters. The method also incorporates the use of packed bed reactors for glyceride conversion and/or fatty acid esterification to make alkyl esters.

Elliott, Brian (Wheat Ridge, CO)

2010-09-14T23:59:59.000Z

159

RADON 131 7. ANALYTICAL METHODS  

E-Print Network [OSTI]

The purpose of this chapter is to describe the analytical methods that are available for detecting, measuring, and/or monitoring radon and its progeny. The intent is not to provide an exhaustive list of analytical methods. Rather, the intention is to identify well-established methods that are used as the standard methods of analysis. Many of the analytical methods used for environmental samples are the methods approved by federal agencies and organizations such as EPA and the National Institute for Occupational Safety and Health (NIOSH). Other methods presented in this chapter are those that are approved by groups such as the Association of Official Analytical Chemists (AOAC) and the American Public Health Association (APHA). Additionally, analytical methods are included that modify previously used methods to obtain lower detection limits and/or to improve accuracy and precision. 7.1 BIOLOGICAL MATERIALS Table 7-1 lists various methods used to detect radon progeny in biological samples. Since the half-life of radon is short, its measurement in biological samples, such as serum, urine, blood, etc., is not practical. Measurements of the longer lived radon progeny 210 Pb and 210 Po in biological samples may be used as an indication of radon exposure; however, ingestion of these isotopes from food and drinking water or direct exposure from other environmental media are considered the primary sources of exposure for these

unknown authors

160

Methods of manipulating stressed epistructures  

DOE Patents [OSTI]

A method of processing an epistructure or processing a semiconductor device including associating a conformal and flexible handle with the epistructure and removing the epistructure and handle as a unit from the parent substrate. The method further includes causing the epistructure and handle unit to conform to a shape that differs from the shape the epistructure otherwise inherently assumes upon removal from the parent substrate. A device prepared according to the disclosed methods.

Wanlass, Mark W

2014-04-08T23:59:59.000Z

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Method of manufacturing superconductor wire  

DOE Patents [OSTI]

A method for forming Nb.sub.3Sn superconducting wire is provided. The method employs a powder-in-tube process using a high-tin intermetallic compound, such as MnSn.sub.2, for producing the Nb.sub.3Sn. The use of a high-tin intermetallic compound enables the process to perform hot extrusion without melting the high-tin intermetallic compound. Alternatively, the method may entail drawing the wire without hot extrusion.

Motowidlo, Leszek

2014-09-16T23:59:59.000Z

162

Method for protein structure alignment  

DOE Patents [OSTI]

This invention provides a method for protein structure alignment. More particularly, the present invention provides a method for identification, classification and prediction of protein structures. The present invention involves two key ingredients. First, an energy or cost function formulation of the problem simultaneously in terms of binary (Potts) assignment variables and real-valued atomic coordinates. Second, a minimization of the energy or cost function by an iterative method, where in each iteration (1) a mean field method is employed for the assignment variables and (2) exact rotation and/or translation of atomic coordinates is performed, weighted with the corresponding assignment variables.

Blankenbecler, Richard; Ohlsson, Mattias; Peterson, Carsten; Ringner, Markus

2005-02-22T23:59:59.000Z

163

Algebraic Statistics methods Giovanni Pistone  

E-Print Network [OSTI]

Algebraic Statistics methods for DOE Giovanni Pistone Department of Mathematics Politecnico di Torino, Italy giovanni.pistone@polito.it Eva Riccomagno Department of Mathematics Politecnico di Torino

Ceragioli, Francesca

164

Method of producing synthetic pitch  

DOE Patents [OSTI]

Embodiments of a method are described for modifying pitches, oils, tars, and binders by using these materials as solvents to extract organic chemicals from coal.

Kennel, Elliot B. (Morgantown, WV); Stansberry, Peter G. (North Olmsted, OH); Stiller, Alfred H. (Morgantown, WV); Zondlo, John W. (Albright, WV)

2012-07-24T23:59:59.000Z

165

Method for fabricating ceramic composites  

DOE Patents [OSTI]

A method for producing composite ceramic material is provided wherein a core ceramic structure is produced and simultaneously enveloped with a sleeve of similar material.

Goretta, Kenneth C. (Downers Grove, IL); Singh, Dileep (Naperville, IL); Polzin, Bryant J. (Downers Grove, IL); Cruse, Terry (Lisle, IL); Picciolo, John J. (Lockport, IL)

2002-01-01T23:59:59.000Z

166

Evaluation of Islanding Detection Methods  

Office of Scientific and Technical Information (OSTI)

4.1 Passive Methods Resident in the Inverter ... 17 4.1.1 Underover Voltage and Underover Frequency...17 4.1.1.1...

167

NEWTON'S METHOD FOR MULTIOBJECTIVE OPTIMIZATION ...  

E-Print Network [OSTI]

The method does not scalarize the original vector optimization problem, ... for an optimization problem with an objective function with a partially ordered vector ...

168

An efficient method to evaluate energy variances for extrapolation methods  

E-Print Network [OSTI]

The energy variance extrapolation method consists in relating the approximate energies in many-body calculations to the corresponding energy variances and inferring eigenvalues by extrapolating to zero variance. The method needs a fast evaluation of the energy variances. For many-body methods that expand the nuclear wave functions in terms of deformed Slater determinants, the best available method for the evaluation of energy variances scales with the sixth power of the number of single-particle states. We propose a new method which depends on the number of single-particle orbits and the number of particles rather than the number of single-particle states. We discuss as an example the case of ${}^4He$ using the chiral N3LO interaction in a basis consisting up to 184 single-particle states.

G. Puddu

2012-01-03T23:59:59.000Z

169

Method of producing polyalkylated oligoalkylenepolyamines  

DOE Patents [OSTI]

A method of preparing polyalkylated oligoalkylenepolyamines is provided. The method includes contacting oligoalkylenepolyamine with a reagent composition comprising (a) alkyl bromide and/or alkyl chloride; (b) a basic agent; and (c) iodide salt. The alkylation reaction may be carried out in a polar, aprotic organic solvent.

Elangovan, Arumugasamy

2014-02-25T23:59:59.000Z

170

Challenging Proteins Principles and Methods  

E-Print Network [OSTI]

.............................................................................................................................................................12 Small-scale expression screening of histidine-tagged membrane proteins from E. coli lysates Gel Filtration Principles and Methods 18-1022-18 Recombinant Protein Purification Handbook Principles and Methods 18-1142-75 Protein Purification Handbook 18-1132-29 Hydrophobic Interaction and Reversed Phase

Jacobsen, Steve

171

Method of synthesizing tungsten nanoparticles  

SciTech Connect (OSTI)

A method to synthesize tungsten nanoparticles has been developed that enables synthesis of nanometer-scale, monodisperse particles that can be stabilized only by tetrahydrofuran. The method can be used at room temperature, is scalable, and the product concentrated by standard means. Since no additives or stabilizing surfactants are required, this method is particularly well suited for producing tungsten nanoparticles for dispersion in polymers. If complete dispersion is achieved due to the size of the nanoparticles, then the optical properties of the polymer can be largely maintained.

Thoma, Steven G; Anderson, Travis M

2013-02-12T23:59:59.000Z

172

Security control methods for CEDR  

SciTech Connect (OSTI)

The purpose of this document is to summarize the findings of recent studies on the security problem in statistical databases and examine their applicability to the specific needs of CEDR. The document is organized as follows: In Section 2 we describe some general control methods which are available on most commercial database software. In Section 3 we provide a classification of statistical security methods. In Section 4 we analyze the type of users of CEDR and the security control methods which may be applied to each type. In Section 5 we summarize the findings of this study and recommend possible solutions.

Rotem, D.

1990-09-01T23:59:59.000Z

173

Manufacturing method of photonic crystal  

DOE Patents [OSTI]

A manufacturing method of a photonic crystal is provided. In the method, a high-refractive-index material is conformally deposited on an exposed portion of a periodic template composed of a low-refractive-index material by an atomic layer deposition process so that a difference in refractive indices or dielectric constants between the template and adjacent air becomes greater, which makes it possible to form a three-dimensional photonic crystal having a superior photonic bandgap. Herein, the three-dimensional structure may be prepared by a layer-by-layer method.

Park, In Sung; Lee, Tae Ho; Ahn, Jin Ho; Biswas, Rana; Constant, Kristen P.; Ho, Kai-Ming; Lee, Jae-Hwang

2013-01-29T23:59:59.000Z

174

Method of passivating semiconductor surfaces  

DOE Patents [OSTI]

A method of passivating Group III-V or II-VI semiconductor compound surfaces. The method includes selecting a passivating material having a lattice constant substantially mismatched to the lattice constant of the semiconductor compound. The passivating material is then grown as an ultrathin layer of passivating material on the surface of the Group III-V or II-VI semiconductor compound. The passivating material is grown to a thickness sufficient to maintain a coherent interface between the ultrathin passivating material and the semiconductor compound. In addition, a device formed from such method is also disclosed.

Wanlass, Mark W. (Golden, CO)

1990-01-01T23:59:59.000Z

175

Method of passivating semiconductor surfaces  

SciTech Connect (OSTI)

A method is described for passivating Group III-V or II-VI semiconductor compound surfaces. The method includes selecting a passivating material having a lattice constant substantially mismatched to the lattice constant of the semiconductor compound. The passivating material is then grown as an ultrathin layer of passivating material on the surface of the Group III-V or II-VI semiconductor compound. The passivating material is grown to a thickness sufficient to maintain a coherent interface between the ultrathin passivating material and the semiconductor compound. In addition, a device formed from such method is also disclosed.

Wanlass, M.W.

1990-06-19T23:59:59.000Z

176

Method of monolithic module assembly  

DOE Patents [OSTI]

Methods for "monolithic module assembly" which translate many of the advantages of monolithic module construction of thin-film PV modules to wafered c-Si PV modules. Methods employ using back-contact solar cells positioned atop electrically conductive circuit elements affixed to a planar support so that a circuit capable of generating electric power is created. The modules are encapsulated using encapsulant materials such as EVA which are commonly used in photovoltaic module manufacture. The methods of the invention allow multiple cells to be electrically connected in a single encapsulation step rather than by sequential soldering which characterizes the currently used commercial practices.

Gee, James M. (Albuquerque, NM); Garrett, Stephen E. (Albuquerque, NM); Morgan, William P. (Albuquerque, NM); Worobey, Walter (Albuquerque, NM)

1999-01-01T23:59:59.000Z

177

Reduced shedding regenerator and method  

DOE Patents [OSTI]

A reduced shedding regenerator and method are disclosed with regenerator surfaces to minimize shedding of particles from the regenerator thereby alleviating a source of potential damage and malfunction of a thermal regenerative machine using the regenerator.

Qiu, Songgang (Richland, WA); Augenblick, John E. (Richland, WA); Erbeznik, Raymond M. (Kennewick, WA)

2007-05-22T23:59:59.000Z

178

New methods for econometric inference  

E-Print Network [OSTI]

Monotonicity is a key qualitative prediction of a wide array of economic models derived via robust comparative statics. It is therefore important to design effective and practical econometric methods for testing this ...

Chetverikov, D. N. (Denis Nikolaevich)

2013-01-01T23:59:59.000Z

179

Method for controlling powertrain pumps  

DOE Patents [OSTI]

A method of controlling a pump supplying a fluid to a transmission includes sensing a requested power and an excess power for a powertrain. The requested power substantially meets the needs of the powertrain, while the excess power is not part of the requested power. The method includes sensing a triggering condition in response to the ability to convert the excess power into heat in the transmission, and determining that an operating temperature of the transmission is below a maximum. The method also includes determining a calibrated baseline and a dissipation command for the pump. The calibrated baseline command is configured to supply the fluid based upon the requested power, and the dissipation command is configured to supply additional fluid and consume the excess power with the pump. The method operates the pump at a combined command, which is equal to the calibrated baseline command plus the dissipation command.

Sime, Karl Andrew; Spohn, Brian L; Demirovic, Besim; Martini, Ryan D; Miller, Jean Marie

2013-10-22T23:59:59.000Z

180

ALTERNATING DIRECTION METHODS FOR SPARSE ...  

E-Print Network [OSTI]

Since zero entries in the inverse covariance matrix correspond to the conditional ..... All the codes of the ADM approach were written by Matlab 7.1. .... graphs via chordal embedding, Optimization Methods and Software 23 (4) (2008), pp. 501-.

2009-09-04T23:59:59.000Z

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Method of Dehalogenation using Diamonds  

SciTech Connect (OSTI)

A method for preparing olefins and halogenated olefins is provided comprising contacting halogenated compounds with diamonds for a sufficient time and at a sufficient temperature to convert the halogenated compounds to olefins and halogenated olefins via elimination reactions.

Farcasiu, Malvina; Kaufman, Phillip B.; Ladner, Edward P.; Anderson, Richard R.

1999-02-26T23:59:59.000Z

182

Hedge Algorithm and Subgradient Methods  

E-Print Network [OSTI]

can be interpreted as an approximation of the utility function over gains and losses used ... fixing the step-size, from a simple approximate line-search method to ...

2010-10-05T23:59:59.000Z

183

Peptides and methods against diabetes  

SciTech Connect (OSTI)

This invention relates to methods of preventing or reducing the severity of diabetes. In one embodiment, the method involves administering to the individual a peptide having substantially the sequence of a on-conserved region sequence of a T cell receptor present on the surface of T cells mediating diabetes or a fragment thereof, wherein the peptide or fragment is capable of causing an effect on the immune system to regulate the T cells. In particular, the T cell receptor has the V.beta. regional V.beta.6 or V.beta.14. In another embodiment, the method involves gene therapy. The invention also relates to methods of diagnosing diabetes by determining the presence of diabetes predominant T cell receptors.

Albertini, Richard J. (Underhill Center, VT); Falta, Michael T. (Hinesburg, VT)

2000-01-01T23:59:59.000Z

184

Information storage media and method  

DOE Patents [OSTI]

Disclosed is a method for storing and retrieving information. More specifically, the present invention is a method for forming predetermined patterns, or data structures, using materials which exhibit enhanced absorption of light at certain wavelengths or, when interrogated with a light having a first wavelength, provide a luminescent response at a second wavelength. These materials may exhibit this response to light inherently, or may be made to exhibit this response by treating the materials with ionizing radiation.

Miller, Steven D. (Richland, WA); Endres, George W. (Richland, WA)

1999-01-01T23:59:59.000Z

185

Method for grinding precision components  

DOE Patents [OSTI]

A method for precision cylindrical grinding of hard brittle materials, such as ceramics or glass and composites comprising ceramics or glass, provides material removal rates as high as 19-380 cm.sup.3 /min/cm. The abrasive tools used in the method comprise a strong, light weight wheel core bonded to a continuous rim of abrasive segments containing superabrasive grain in a dense metal bond matrix.

Ramanath, Srinivasan (Holden, MA); Kuo, Shih Yee (Westboro, MA); Williston, William H. (Holden, MA); Buljan, Sergej-Tomislav (Acton, MA)

2000-01-01T23:59:59.000Z

186

Analytical methods under emergency conditions  

SciTech Connect (OSTI)

This lecture discusses methods for the radiochemical determination of internal contamination of the body under emergency conditions, here defined as a situation in which results on internal radioactive contamination are needed quickly. The purpose of speed is to determine the necessity for medical treatment to increase the natural elimination rate. Analytical methods discussed include whole-body counting, organ counting, wound monitoring, and excreta analysis. 12 references. (ACR)

Sedlet, J.

1983-01-01T23:59:59.000Z

187

Method for grinding precision components  

SciTech Connect (OSTI)

A method for precision cylindrical grinding of hard brittle materials, such as ceramics or glass and composites comprising ceramics or glass, provides material removal rates as high as 19--380 cm{sup 3}/min/cm. The abrasive tools used in the method comprise a strong, light weight wheel core bonded to a continuous rim of abrasive segments containing superabrasive grain in a dense metal bond matrix.

Ramanath, S.; Kuo, S.Y.; Williston, W.H.; Buljan, S.T.

2000-02-01T23:59:59.000Z

188

Laminate armor and related methods  

DOE Patents [OSTI]

Laminate armor and methods of manufacturing laminate armor. Specifically, laminate armor plates comprising a commercially pure titanium layer and a titanium alloy layer bonded to the commercially pure titanium outer layer are disclosed, wherein an average thickness of the titanium alloy inner layer is about four times an average thickness of the commercially pure titanium outer layer. In use, the titanium alloy layer is positioned facing an area to be protected. Additionally, roll-bonding methods for manufacturing laminate armor plates are disclosed.

Chu, Henry S; Lillo, Thomas M; Zagula, Thomas M

2013-02-26T23:59:59.000Z

189

Method for determining gene knockouts  

DOE Patents [OSTI]

A method for determining candidates for gene deletions and additions using a model of a metabolic network associated with an organism, the model includes a plurality of metabolic reactions defining metabolite relationships, the method includes selecting a bioengineering objective for the organism, selecting at least one cellular objective, forming an optimization problem that couples the at least one cellular objective with the bioengineering objective, and solving the optimization problem to yield at least one candidate.

Maranas, Costas D. (Port Matilda, PA); Burgard, Anthony R. (State College, PA); Pharkya, Priti (State College, PA)

2011-09-27T23:59:59.000Z

190

Method for determining gene knockouts  

DOE Patents [OSTI]

A method for determining candidates for gene deletions and additions using a model of a metabolic network associated with an organism, the model includes a plurality of metabolic reactions defining metabolite relationships, the method includes selecting a bioengineering objective for the organism, selecting at least one cellular objective, forming an optimization problem that couples the at least one cellular objective with the bioengineering objective, and solving the optimization problem to yield at least one candidate.

Maranas, Costa D; Burgard, Anthony R; Pharkya, Priti

2013-06-04T23:59:59.000Z

191

SLR methods for attached sunspaces  

SciTech Connect (OSTI)

Solar load ratio (SLR) methods applied to sunspaces are reviewed. Procedures are described both for the 28 sunspace basic design types and for the design variations that can be accommodated within the SLR method. Emphasis is placed on aspects of design, operation, and analysis that relate to the production of both plants and heat. Issues discussed include geometry, shading of mass, temperature limits, and energy loss caused by the exfiltration of water vapor.

Jones, R.W.; McFarland, R.D.

1982-01-01T23:59:59.000Z

192

Communication-avoiding Krylov subspace methods  

E-Print Network [OSTI]

CG 5.1 Conjugate gradient method . . . . . . . . . . . . 5.2s-step conjugate gradient methods on a multiprocessor system98] R. Fletcher, Conjugate gradient methods for indefinite

Hoemmen, Mark

2010-01-01T23:59:59.000Z

193

Conjugate Gradient Methods in Confirmatory Factor Analysis  

E-Print Network [OSTI]

R. I. (1988), "Conjugate Gradient Methods in Confirmatoryapply generalized conjugate gradient methods in an attemptby used. The conjugate gradient method, which is simple and

Jamshardian, Mortaza; Jennrich, Robert

1993-01-01T23:59:59.000Z

194

Graph regularization methods for Web spam detection  

E-Print Network [OSTI]

An introduction to the conjugate gradient method without theonly implemented the conjugate gradient method. Note onemployed was the conjugate gradient method, de- scribed in

Abernethy, Jacob; Chapelle, Olivier; Castillo, Carlos

2010-01-01T23:59:59.000Z

195

Seismic Fracture Characterization Methods for Enhanced Geothermal...  

Broader source: Energy.gov (indexed) [DOE]

Seismic Fracture Characterization Methods for Enhanced Geothermal Systems Seismic Fracture Characterization Methods for Enhanced Geothermal Systems Project objective: Make Seismic...

196

Seismic Fracture Characterization Methods for Enhanced Geothermal...  

Broader source: Energy.gov (indexed) [DOE]

Seismic Fracture Characterization Methods for Enhanced Geothermal Systems; 2010 Geothermal Technology Program Peer Review Report Seismic Fracture Characterization Methods for...

197

Comparison of homotopy analysis method and homotopy perturbation method  

E-Print Network [OSTI]

equation Songxin Liang , David J. Jeffrey Department of Applied Mathematics, University of Western Ontario an evolution equation used as the second example in a recent paper by Ganji et al (2007). It is found and t except t = 0. It is also found that the solution given by the variational iteration method (VIM

Jeffrey, David

198

COMPARING DETECTION METHODS OF AFLATOXIN AND EXPLORING AFLATOXIN DECONTAMINATION METHODS  

E-Print Network [OSTI]

DECONTAMINATION METHODS Pages in Study: 81 Candidate for Degree of Master of Science Ethanol fermentation if aflatoxin concentrated in the distilled ethanol and/or dry distillers grain end-products. Alliquots of fermented mash, distilled ethanol, stillage, and dry distillers grain (DDG) were analyzed via LC

Ray, David

199

Deflation Methods in Fermion Inverters  

E-Print Network [OSTI]

I will review recent developments in matrix deflation methods, by Ronald Morgan/Walter Wilcox, Andreas Stathopoulos/Konstantinos Orginos, and Martin L\\"uscher, with application to lattice QCD fermion inversion. I will begin with a short review of deflation-related work in the field. The Morgan/Wilcox algorithms using GMRES and BiCGStab for deflation will be described. Typical results for quenched (Wilson and twisted mass) and dynamical configurations (CP-PACS and ETMC) will be displayed and discussed. I will outline how inclusion of multiple right-hand sides and multiple shifts can be accommodated within versions of these methods. I will also review deflation methods based on Conjugate Gradient introduced by Stathopoulos and Orginos for hermitian systems with multiple right-hand sides as well as L\\"uscher's non-hermitian domain decomposition algorithm using Generalized Conjugate Residual.}

Walter Wilcox

2007-10-23T23:59:59.000Z

200

Method for protecting a surface  

DOE Patents [OSTI]

The invention includes a method of producing a hard metallic material by forming a mixture containing at least 55% iron and at least one of B, C, Si and P. The mixture is formed into an alloy and cooled to form a metallic material having a hardness of greater than about 9.2 GPa. The invention includes a method of forming a wire by combining a metal strip and a powder. The strip and the powder are rolled to form a wire containing at least 55% iron and from 2–7 additional elements including at lease one of C, Si and B. The invention also includes a method of forming a hardened surface on a substrate by processing a solid mass to form a power, applying the powder to a surface to form a layer containing metallic glass, and converting the glass to a crystalline material having a nanocrystalline grain size.

Branagan, Daniel J.

2006-06-27T23:59:59.000Z

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Methods of producing transportation fuel  

DOE Patents [OSTI]

Systems, methods, and heaters for treating a subsurface formation are described herein. At least one method for producing transportation fuel is described herein. The method for producing transportation fuel may include providing formation fluid having a boiling range distribution between -5.degree. C. and 350.degree. C. from a subsurface in situ heat treatment process to a subsurface treatment facility. A liquid stream may be separated from the formation fluid. The separated liquid stream may be hydrotreated and then distilled to produce a distilled stream having a boiling range distribution between 150.degree. C. and 350.degree. C. The distilled liquid stream may be combined with one or more additives to produce transportation fuel.

Nair, Vijay (Katy, TX); Roes, Augustinus Wilhelmus Maria (Houston, TX); Cherrillo, Ralph Anthony (Houston, TX); Bauldreay, Joanna M. (Chester, GB)

2011-12-27T23:59:59.000Z

202

Shell model Monte Carlo methods  

SciTech Connect (OSTI)

We review quantum Monte Carlo methods for dealing with large shell model problems. These methods reduce the imaginary-time many-body evolution operator to a coherent superposition of one-body evolutions in fluctuating one-body fields; resultant path integral is evaluated stochastically. We first discuss the motivation, formalism, and implementation of such Shell Model Monte Carlo methods. There then follows a sampler of results and insights obtained from a number of applications. These include the ground state and thermal properties of pf-shell nuclei, thermal behavior of {gamma}-soft nuclei, and calculation of double beta-decay matrix elements. Finally, prospects for further progress in such calculations are discussed. 87 refs.

Koonin, S.E. [California Inst. of Tech., Pasadena, CA (United States). W.K. Kellogg Radiation Lab.; Dean, D.J. [Oak Ridge National Lab., TN (United States)

1996-10-01T23:59:59.000Z

203

Robotic follow system and method  

DOE Patents [OSTI]

Robot platforms, methods, and computer media are disclosed. The robot platform includes perceptors, locomotors, and a system controller, which executes instructions for a robot to follow a target in its environment. The method includes receiving a target bearing and sensing whether the robot is blocked front. If the robot is blocked in front, then the robot's motion is adjusted to avoid the nearest obstacle in front. If the robot is not blocked in front, then the method senses whether the robot is blocked toward the target bearing and if so, sets the rotational direction opposite from the target bearing, and adjusts the rotational velocity and translational velocity. If the robot is not blocked toward the target bearing, then the rotational velocity is adjusted proportional to an angle of the target bearing and the translational velocity is adjusted proportional to a distance to the nearest obstacle in front.

Bruemmer, David J [Idaho Falls, ID; Anderson, Matthew O [Idaho Falls, ID

2007-05-01T23:59:59.000Z

204

Methods of producing cesium-131  

DOE Patents [OSTI]

Methods of producing cesium-131. The method comprises dissolving at least one non-irradiated barium source in water or a nitric acid solution to produce a barium target solution. The barium target solution is irradiated with neutron radiation to produce cesium-131, which is removed from the barium target solution. The cesium-131 is complexed with a calixarene compound to separate the cesium-131 from the barium target solution. A liquid:liquid extraction device or extraction column is used to separate the cesium-131 from the barium target solution.

Meikrantz, David H; Snyder, John R

2012-09-18T23:59:59.000Z

205

New methodical developments for GRANIT  

SciTech Connect (OSTI)

New methodical developments for the GRANIT spectrometer address further improvements of the critical parameters of this experimental installation, as well as its applications to new fields of research. Keeping in mind an extremely small fraction of ultra cold neutrons (UCN) that could be bound in gravitational quantum states, we look for methods to increase statistics due to: developing UCN sources with maximum phase-space density, counting simultaneously a large fraction of neutrons using position-sensitive detectors, and decreasing detector backgrounds. Also we explore an eventual application of the GRANIT spectrometer beyond the scope of its initial goals, for instance, for reflectometry with UCN.

Baessler, Stefan [ORNL; Nesvizhevsky, V. [ Inst Max Von Laue Paul Langevin, F-38042 Grenoble 9, France; Toperverg, B [Ruhr University, Bochum, Germany; Zhernenkov, K. [Ruhr University, Bochum, Germany; Gagarski, A [Petersburg Nuclear Physics Institute, Gatchina, Russia; Lychagin, E [Joint Institute for Nuclear Research, Dubna, Russia; Muzychka, A [Joint Institute for Nuclear Research, Dubna, Russia; Strelkov, A [Joint Institute for Nuclear Research, Dubna, Russia; Mietke, A [Technische Universitat Dresden

2011-01-01T23:59:59.000Z

206

Block-conjugate-gradient method  

SciTech Connect (OSTI)

It is shown that by using the block-conjugate-gradient method several, say {ital s}, columns of the inverse Kogut-Susskind fermion matrix can be found simultaneously, in less time than it would take to run the standard conjugate-gradient algorithm {ital s} times. The method improves in efficiency relative to the standard conjugate-gradient algorithm as the fermion mass is decreased and as the value of the coupling is pushed to its limit before the finite-size effects become important. Thus it is potentially useful for measuring propagators in large lattice-gauge-theory calculations of the particle spectrum.

McCarthy, J.F. (Department of Physics, Indiana University, Bloomington, Indiana 47405 (US))

1989-09-15T23:59:59.000Z

207

Combustion synthesis method and products  

DOE Patents [OSTI]

Disclosed is a method of producing dense refractory products, comprising: (a) obtaining a quantity of exoergic material in powder form capable of sustaining a combustion synthesis reaction; (b) removing absorbed water vapor therefrom; (c) cold-pressing said material into a formed body; (d) plasma spraying said formed body with a molten exoergic material to form a coat thereon; and (e) igniting said exoergic coated formed body under an inert gas atmosphere and pressure to produce self-sustained combustion synthesis. Also disclosed are products produced by the method.

Holt, J.B.; Kelly, M.

1993-03-30T23:59:59.000Z

208

Combustion synthesis method and products  

DOE Patents [OSTI]

Disclosed is a method of producing dense refractory products, comprising: (a) obtaining a quantity of exoergic material in powder form capable of sustaining a combustion synthesis reaction; (b) removing absorbed water vapor therefrom; (c) cold-pressing said material into a formed body; (d) plasma spraying said formed body with a molten exoergic material to form a coat thereon; and (e) igniting said exoergic coated formed body under an inert gas atmosphere and pressure to produce self-sustained combustion synthesis. Also disclosed are products produced by the method.

Holt, J. Birch (San Jose, CA); Kelly, Michael (West Alexandria, OH)

1993-01-01T23:59:59.000Z

209

Method for in vitro recombination  

SciTech Connect (OSTI)

The present invention relates to an in vitro method, using isolated protein reagents, for joining two double-stranded (ds) DNA molecules of interest, wherein the distal region of the first DNA molecule and the proximal region of the second DNA molecule share a region of sequence identity. The method allows the joining of a number of DNA fragments, in a predetermined order and orientation, without the use of restriction enzymes. It can be used, e.g., to join synthetically produced sub-fragments of a gene or genome of interest.

Gibson, Daniel Glenn; Smith, Hamilton O

2013-05-07T23:59:59.000Z

210

Method for joining ceramic shapes  

DOE Patents [OSTI]

A method for joining shapes of ceramic materials together to form a unitary ceramic structure. In the method of the invention, a mixture of two or more chemical components which will react exothermically is placed between the surfaces to be joined, and the joined shapes heated to a temperature sufficient to initiate the exothermic reaction forming a joining material which acts to bond the shapes together. Reaction materials are chosen which will react exothermically at temperatures below the degradation temperature of the materials to be joined. The process is particularly suited for joining composite materials of the silicon carbide-silicon carbide fiber type.

Rabin, Barry H. (Idaho Falls, ID)

1992-01-01T23:59:59.000Z

211

Method for manufacturing magnetohydrodynamic electrodes  

DOE Patents [OSTI]

A method of manufacturing electrodes for use in a magnetohydrodynamic (MHD) generator is described comprising the steps of preparing a billet having a core of a first metal, a tubular sleeve of a second metal, and an outer sheath of an extrusile metal; evacuating the space between the parts of the assembled billet; extruding the billet; and removing the outer jacket. The extruded bar may be made into electrodes by cutting and bending to the shape required for an MHD channel frame. The method forms a bond between the first metal of the core and the second metal of the sleeve strong enough to withstand a hot and corrosive environment.

Killpatrick, D.H.; Thresh, H.R.

1980-06-24T23:59:59.000Z

212

Quantum theory of nonequilibrium processes II. Application to nuclear collisions  

SciTech Connect (OSTI)

In the high-energy (E/sub lab/> or =200 MeV/nucl) heavy ion-collisions, the quantum uncertainty of nucleon energies, given by the collision frequency, is of the order of (50-100) MeV. At hundreds MeV/nucl beam energies, the uncertainty is comparable with nucleon energies in the equal ion-velocity frame, indicating a quantum character of the dynamics. The quantum dynamics of a collision process is examined using nonequilibrium Green's function methods. Numerical calculations of collisions in an interpenetrating nuclear matter model, at the energy E/sub lab/ = 400 MeV/nucl, are performed. Comparison of the quantum dynamics, with the classical Markovian dynamics from the Boltzmann equation, reveals effects of the ill-defined nucleon energies in the nucleon momentum distribution. It is shown that the quantum dynamics proceeds twice as slow as Boltzmann dynamics, but the off-shell kinematics compensates for this somewhat.

Danielewicz, P.

1984-02-01T23:59:59.000Z

213

Method for producing a borohydride  

DOE Patents [OSTI]

A method for producing a borohydride is described and which includes the steps of providing a source of borate; providing a material which chemically reduces the source of the borate to produce a borohydride; and reacting the source of borate and the material by supplying heat at a temperature which substantially effects the production of the borohydride.

Kong, Peter C. (Idaho Falls, ID)

2008-09-02T23:59:59.000Z

214

Method of synthesizing pyrite nanocrystals  

DOE Patents [OSTI]

A method of synthesizing pyrite nanocrystals is disclosed which in one embodiment includes forming a solution of iron (III) diethyl dithiophosphate and tetra-alkyl-ammonium halide in water. The solution is heated under pressure. Pyrite nanocrystal particles are then recovered from the solution.

Wadia, Cyrus; Wu, Yue

2013-04-23T23:59:59.000Z

215

GGNB Methods Courses 2012 -Overview Sep 2012 -Feb 2013 Short Methods Courses & Method Seminars; Extended Methods Course  

E-Print Network [OSTI]

fluorescence complementation) in yeast 1.0 Oct 2012 Jahn, Reinhard Chua, John / Binotti, Beyenech / Boyken-protein interactions in RNP complexes 1.0 23-25 Jan 2013 Görlich, Dirk Frey, Steffen A 131 Methods in bacterial protein expression and purification 0.5 18 Oct 2012 Görlich, Dirk Frey, Steffen A 132 Purification of recombinant

Gollisch, Tim

216

TRAC methods and models. [PWR  

SciTech Connect (OSTI)

The numerical methods and physical models used in the Transient Reactor Analysis Code (TRAC) versions PD2 and PF1 are discussed. Particular emphasis is placed on TRAC-PF1, the version specifically designed to analyze small-break loss-of-coolant accidents (LOCAs).

Mahaffy, J.H.; Liles, D.R.; Bott, T.F.

1981-01-01T23:59:59.000Z

217

Supporting Information Materials and Methods  

E-Print Network [OSTI]

1 Supporting Information Materials and Methods Description of Energy-Recycling Artificial Foot The energy-recycling artificial foot was comprised of six component groups: the attachment interface, the toe The prosthesis simulator boot weighed 1.30 kg, and the lift shoe weighed 1.42 kg, with each adding approximately

Collins, Steven H.

218

Methods of degrading napalm B  

DOE Patents [OSTI]

Methods of degrading napalm and/or trinitrotoluene involve contacting the waste with specific intra-amoebic isolates of ATCC 40908 and/or dispersants derived therefrom. Useful isolates are deposited as ATCC 77529, NAP-1 deposited as ATCC 77526 and 13 deposited as ATCC 77527.

Tyndall, R.L.; Vass, A.

1995-09-12T23:59:59.000Z

219

Method for synthesizing carbon nanotubes  

DOE Patents [OSTI]

A method for preparing a precursor solution for synthesis of carbon nanomaterials, where a polar solvent is added to at least one block copolymer and at least one carbohydrate compound, and the precursor solution is processed using a self-assembly process and subsequent heating to form nanoporous carbon films, porous carbon nanotubes, and porous carbon nanoparticles.

Fan, Hongyou

2012-09-04T23:59:59.000Z

220

Methods of degrading napalm B  

DOE Patents [OSTI]

Methods of degrading napalm and/or trinitrotoluene involve contacting the waste with specific intra-amoebic isolates of ATCC 40908 and/or dispersants derived therefrom. Useful isolates include is deposited as ATCC 77529, NAP-1 deposited as ATCC 77526 and 13 deposited as ATCC 77527.

Tyndall, Richard L. (Clinton, TN); Vass, Arpad (Oak Ridge, TN)

1995-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Method of forming ceramic bricks  

DOE Patents [OSTI]

A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

Poeppel, Roger B. (Glen Ellyn, IL); Claar, Terry D. (Newark, DE); Silkowski, Peter (Urbana, IL)

1988-01-01T23:59:59.000Z

222

ENERGY DEMAND FORECAST METHODS REPORT  

E-Print Network [OSTI]

CALIFORNIA ENERGY COMMISSION ENERGY DEMAND FORECAST METHODS REPORT Companion Report to the California Energy Demand 2006-2016 Staff Energy Demand Forecast Report STAFFREPORT June 2005 CEC-400 .......................................................................................................................................1-1 ENERGY DEMAND FORECASTING AT THE CALIFORNIA ENERGY COMMISSION: AN OVERVIEW

223

Additive manufacturing method of producing  

E-Print Network [OSTI]

Additive manufacturing method of producing silver or copper tracks on polyimide film Problem/stripping) using an additive process support by a novel bio- degradable photo-initiator package. technology. Building on previous work by Hoyd- Gigg Ng et al. [1,2], Heriot-Watt has developed an additive film

Painter, Kevin

224

Natural Language Processing Methods for  

E-Print Network [OSTI]

Natural Language Processing Methods for Automatic Illustration of Text Richard Johansson Licentiate of Language Technology #12;ISSN 1652-4691 Licentiate Thesis 4, 2006 LU-CS-LIC:2006-1 Thesis submitted for partial fulfilment of the degree of licentiate. Department of Computer Science Lund Institute

225

Method of forming ceramic bricks  

DOE Patents [OSTI]

A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

Poeppel, R.B.; Claar, T.D.; Silkowski, P.

1987-04-22T23:59:59.000Z

226

Reformulated diesel fuel and method  

DOE Patents [OSTI]

A method for mathematically identifying at least one diesel fuel suitable for combustion in an automotive diesel engine with significantly reduced emissions and producible from known petroleum blendstocks using known refining processes, including the use of cetane additives (ignition improvers) and oxygenated compounds.

McAdams, Hiramie T [Carrollton, IL; Crawford, Robert W [Tucson, AZ; Hadder, Gerald R [Oak Ridge, TN; McNutt, Barry D [Arlington, VA

2006-08-22T23:59:59.000Z

227

Heat reclaiming method and apparatus  

DOE Patents [OSTI]

Method and apparatus to extract heat by transferring heat from hot compressed refrigerant to a coolant, such as water, without exceeding preselected temperatures in the coolant and avoiding boiling in a water system by removing the coolant from direct or indirect contact with the hot refrigerant.

Jardine, Douglas M. (Colorado Springs, CO)

1984-01-01T23:59:59.000Z

228

Method of producing molybdenum-99  

SciTech Connect (OSTI)

Method of producing molybdenum-99, comprising accelerating ions by means of an accelerator; directing the ions onto a metal target so as to generate neutrons having an energy of greater than 10 MeV; directing the neutrons through a converter material comprising techentium-99 to produce a mixture comprising molybdenum-99; and, chemically extracting the molybdenum-99 from the mixture.

Pitcher, Eric John

2013-05-28T23:59:59.000Z

229

UNCONVENTIONAL METHODS FOR YIELD IMPROVEMENT  

E-Print Network [OSTI]

methods (active heating and cooling, directional solidifi- cation) Novel yield improvement techniques through a vari- ety of active heating and cooling schemes. It is envisioned that the techniques will allow techniques for decreasing the size and number of risers re- quired to produce quality castings

Beckermann, Christoph

230

Method of doping organic semiconductors  

DOE Patents [OSTI]

A method includes the steps of forming a contiguous semiconducting region and heating the region. The semiconducting region includes polyaromatic molecules. The heating raises the semiconducting region to a temperature above room temperature. The heating is performed in the presence of a dopant gas and the absence of light to form a doped organic semiconducting region.

Kloc, Christian Leo (Constance, DE); Ramirez, Arthur Penn (Summit, NJ); So, Woo-Young (New Providence, NJ)

2012-02-28T23:59:59.000Z

231

Method of making monodisperse nanoparticles  

DOE Patents [OSTI]

A method of making particles of either spherical or cylindrical geometry with a characteristic diameter less than 50 nanometers by mixing at least one structure directing agent dissolved in a solvent with at least one amphiphilic block copolymer dissolved in a solvent to make a solution containing particles, where the particles can be subsequently separated and dispersed in a solvent of choice.

Fan, Hongyon; Sun, Zaicheng

2012-10-16T23:59:59.000Z

232

Methods of producing cermet materials and methods of utilizing same  

DOE Patents [OSTI]

Methods of fabricating cermet materials and methods of utilizing the same such as in filtering particulate and gaseous pollutants from internal combustion engines having intermetallic and ceramic phases. The cermet material may be made from a transition metal aluminide phase and an alumina phase. The mixture may be pressed to form a green compact body and then heated in a nitrogen-containing atmosphere so as to melt aluminum particles and form the cermet. Filler materials may be added to increase the porosity or tailor the catalytic properties of the cermet material. Additionally, the cermet material may be reinforced with fibers or screens. The cermet material may also be formed so as to pass an electrical current therethrough to heat the material during use.

Kong, Peter C. (Idaho Falls, ID)

2008-12-30T23:59:59.000Z

233

Methods of fabricating cermet materials and methods of utilizing same  

DOE Patents [OSTI]

Methods of fabricating cermet materials and methods of utilizing the same such as in filtering particulate and gaseous pollutants from internal combustion engines having intermetallic and ceramic phases. The cermet material may be made from a transition metal aluminide phase and an aluminia phase. The mixture may be pressed to form a green compact body and then heated in a nitrogen-containing atmosphere so as to melt aluminum particles and form the cermet. Filler materials may be added to increase the porosity or tailor the catalytic properties of the cermet material. Additionally, the cermet material may be reinforced with fibers or screens. The cermet material may also be formed so as to pass an electrical current therethrough to heat the material during use.

Kong, Peter C.

2006-04-04T23:59:59.000Z

234

Method of recycling hazardous waste  

SciTech Connect (OSTI)

The production of primary metal from ores has long been a necessary, but environmentally devastating process. Over the past 20 years, in an effort to lessen environmental impacts, the metal processing industry has developed methods for recovering metal values from certain hazardous wastes. However, these processes leave residual molten slag that requires disposal in hazardous waste landfills. A new process recovers valuable metals, metal alloys, and metal oxides from hazardous wastes, such as electric arc furnace (EAF) dust from steel mills, mill scale, spent aluminum pot liners, and wastewater treatment sludge from electroplating. At the same time, the process does not create residual waste for disposal. This new method uses all wastes from metal production processes. These hazardous materials are converted to three valuable products - mineral wool, zinc oxide, and high-grade iron.

NONE

1999-11-11T23:59:59.000Z

235

Method for detecting toxic gases  

DOE Patents [OSTI]

A method is disclosed which is capable of detecting low concentrations of a pollutant or other component in air or other gas. This method utilizes a combination of a heating filament having a catalytic surface of a noble metal for exposure to the gas and producing a derivative chemical product from the component. An electrochemical sensor responds to the derivative chemical product for providing a signal indicative of the product. At concentrations in the order of about 1-100 ppm of tetrachloroethylene, neither the heating filament nor the electrochemical sensor is individually capable of sensing the pollutant. In the combination, the heating filament converts the benzyl chloride to one or more derivative chemical products which may be detected by the electrochemical sensor. 6 figures.

Stetter, J.R.; Zaromb, S.; Findlay, M.W. Jr.

1991-10-08T23:59:59.000Z

236

Method for making carbon films  

SciTech Connect (OSTI)

A method for treating an organic polymer material, preferably a vinylidene chloride/vinyl chloride copolymer (Saran) to produce a flat sheet of carbon film material having a high surface area ([approx equal]1000 m[sup 2] /g) suitable as an electrode material for super capacitor applications. The method comprises heating a vinylidene chloride/vinyl chloride copolymer film disposed between two spaced apart graphite or ceramic plates to a first temperature of about 160 C for about 14 hours to form a stabilized vinylidene chloride/vinyl chloride polymer film, thereafter heating the stabilized film to a second temperature of about 750 C in an inert atmosphere for about one hour to form a carbon film; and finally activating the carbon film to increase the surface area by heating the carbon film in an oxidizing atmosphere to a temperature of at least 750--850 C for between 1--6 hours. 2 figs.

Tan, M.X.

1999-07-29T23:59:59.000Z

237

Method for extreme ultraviolet lithography  

DOE Patents [OSTI]

A method of producing a patterned array of features, in particular, gate apertures, in the size range 0.4-0.05 .mu.m using projection lithography and extreme ultraviolet (EUV) radiation. A high energy laser beam is used to vaporize a target material in order to produce a plasma which in turn, produces extreme ultraviolet radiation of a characteristic wavelength of about 13 nm for lithographic applications. The radiation is transmitted by a series of reflective mirrors to a mask which bears the pattern to be printed. The demagnified focused mask pattern is, in turn, transmitted by means of appropriate optics and in a single exposure, to a substrate coated with photoresists designed to be transparent to EUV radiation and also satisfy conventional processing methods.

Felter, T. E. (Livermore, CA); Kubiak, Glenn D. (Livermore, CA)

1999-01-01T23:59:59.000Z

238

Method for extreme ultraviolet lithography  

DOE Patents [OSTI]

A method of producing a patterned array of features, in particular, gate apertures, in the size range 0.4-0.05 .mu.m using projection lithography and extreme ultraviolet (EUV) radiation. A high energy laser beam is used to vaporize a target material in order to produce a plasma which in turn, produces extreme ultraviolet radiation of a characteristic wavelength of about 13 nm for lithographic applications. The radiation is transmitted by a series of reflective mirrors to a mask which bears the pattern to be printed. The demagnified focused mask pattern is, in turn, transmitted by means of appropriate optics and in a single exposure, to a substrate coated with photoresists designed to be transparent to EUV radiation and also satisfy conventional processing methods.

Felter, T. E. (727 Clara St., Livermore, Alameda County, CA 94550); Kubiak, G. D. (475 Maple St., Livermore, Alameda County, CA 94550)

2000-01-01T23:59:59.000Z

239

Explosives detection system and method  

DOE Patents [OSTI]

A method of detecting explosives in a vehicle includes providing a first rack on one side of the vehicle, the rack including a neutron generator and a plurality of gamma ray detectors; providing a second rack on another side of the vehicle, the second rack including a neutron generator and a plurality of gamma ray detectors; providing a control system, remote from the first and second racks, coupled to the neutron generators and gamma ray detectors; using the control system, causing the neutron generators to generate neutrons; and performing gamma ray spectroscopy on spectra read by the gamma ray detectors to look for a signature indicative of presence of an explosive. Various apparatus and other methods are also provided.

Reber, Edward L. (Idaho Falls, ID); Jewell, James K. (Idaho Falls, ID); Rohde, Kenneth W. (Idaho Falls, ID); Seabury, Edward H. (Idaho Falls, ID); Blackwood, Larry G. (Idaho Falls, ID); Edwards, Andrew J. (Idaho Falls, ID); Derr, Kurt W. (Idaho Falls, ID)

2007-12-11T23:59:59.000Z

240

Monte Carlo methods in ICF  

SciTech Connect (OSTI)

Monte Carlo methods appropriate to simulate the transport of x-rays, neutrons, ion and electrons in Inertial Confinement Fusion targets are described and analyzed. The Implicit Monte Carlo method of x-ray transport handles symmetry within indirect drive ICF hohlraums well, but can be improved 50X in efficiency by angular biasing the x-rays towards the fuel capsule. Accurate simulation of thermonuclear burns nd burn diagnostics involves detailed particle source spectra, charged particle ranges, inflight reaction kinematics, corrections for bulk and thermal Doppler effects and variance reduction to obtain adequate statistics for rare events. It is found that the effects of angular Coulomb scattering must be included in models of charged particle transport through heterogeneous materials.

Zimmerman, G.B.

1997-06-24T23:59:59.000Z

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Method for lubricating contacting surfaces  

DOE Patents [OSTI]

A method is provided for tribological lubrication of sliding contact surfaces, where two surfaces are in contact and in motion relative to each other, operating in a vapor-phase environment containing at least one alcohol compound at a concentration sufficiently high to provide one monolayer of coverage on at least one of the surfaces, where the alcohol compound continuously reacts at the surface to provide lubrication.

Dugger, Michael T. (Tijeras, NM); Ohlhausen, James A. (Albuquerque, NM); Asay, David B. (Boalsburg, PA); Kim, Seong H. (State College, PA)

2011-12-06T23:59:59.000Z

242

Spectral shift reactor control method  

SciTech Connect (OSTI)

A method of operating a pressurized water nuclear reactor is described which comprises the determining of the present core power and reactivity levels and predicting the change in such levels due to displacer rod movements. Groups or single clusters of displacer rods can be inserted or withdrawn based on the predicted core power and reactivity levels to change the core power level and power distribution thereby providing load follow capability, without changing control rod positions or coolant boron concentrations.

Impink, A.J. Jr.

1984-02-21T23:59:59.000Z

243

Method of sintering ceramic materials  

DOE Patents [OSTI]

A method for sintering ceramic materials is described. A ceramic article is coated with layers of protective coatings such as boron nitride, graphite foil, and niobium. The coated ceramic article is embedded in a container containing refractory metal oxide granules and placed within a microwave oven. The ceramic article is heated by microwave energy to a temperature sufficient to sinter the ceramic article to form a densified ceramic article having a density equal to or greater than 90% of theoretical density. 2 figs.

Holcombe, C.E.; Dykes, N.L.

1992-11-17T23:59:59.000Z

244

Method for forming metal contacts  

DOE Patents [OSTI]

Methods of forming metal contacts with metal inks in the manufacture of photovoltaic devices are disclosed. The metal inks are selectively deposited on semiconductor coatings by inkjet and aerosol apparatus. The composite is heated to selective temperatures where the metal inks burn through the coating to form an electrical contact with the semiconductor. Metal layers are then deposited on the electrical contacts by light induced or light assisted plating.

Reddington, Erik; Sutter, Thomas C; Bu, Lujia; Cannon, Alexandra; Habas, Susan E; Curtis, Calvin J; Miedaner, Alexander; Ginley, David S; Van Hest, Marinus Franciscus Antonius Maria

2013-09-17T23:59:59.000Z

245

Method of installing subsurface barrier  

DOE Patents [OSTI]

Systems, components, and methods relating to subterranean containment barriers. Laterally adjacent tubular casings having male interlock structures and multiple female interlock structures defining recesses for receiving a male interlock structure are used to create subterranean barriers for containing and treating buried waste and its effluents. The multiple female interlock structures enable the barriers to be varied around subsurface objects and to form barrier sidewalls. The barrier may be used for treating and monitoring a zone of interest.

Nickelson, Reva A. (Shelley, ID); Richardson, John G. (Idaho Falls, ID); Kostelnik, Kevin M. (Idaho Falls, ID); Sloan, Paul A. (Rigby, ID)

2007-10-09T23:59:59.000Z

246

Method for producing hydrophobic aerogels  

SciTech Connect (OSTI)

A method for treating a dried monolithic aerogel containing non-dispersed particles, with an organometallic surface modifying agent to produce hydrophobic aerogels. The dried, porous hydrophobic aerogels contain a protective layer of alkyl groups, such as methyl groups, on the modified surfaces of the pores of the aerogel. The alkyl groups at the aerogel surface typically contain at least one carbon-metal bond per group.

Hrubesh, Lawrence W. (Pleasanton, CA); Poco, John F. (Livermore, CA); Coronado, Paul R. (Livermore, CA)

1999-01-01T23:59:59.000Z

247

Method for producing hydrophobic aerogels  

SciTech Connect (OSTI)

A method is described for treating a dried monolithic aerogel containing non-dispersed particles, with an organometallic surface modifying agent to produce hydrophobic aerogels. The dried, porous hydrophobic aerogels contain a protective layer of alkyl groups, such as methyl groups, on the modified surfaces of the pores of the aerogel. The alkyl groups at the aerogel surface typically contain at least one carbon-metal bond per group.

Hrubesh, L.W.; Poco, J.F.; Coronado, P.R.

1999-12-21T23:59:59.000Z

248

Methods of making alkyl esters  

DOE Patents [OSTI]

A method comprising contacting an alcohol, a feed comprising one or more glycerides and equal to or greater than 2 wt % of one or more free fatty acids, and a solid acid catalyst, a nanostructured polymer catalyst, or a sulfated zirconia catalyst in one or more reactors, and recovering from the one or more reactors an effluent comprising equal to or greater than about 75 wt % alkyl ester and equal to or less than about 5 wt % glyceride.

Elliott, Brian (Wheat Ridge, CO)

2010-08-03T23:59:59.000Z

249

Wafer scale micromachine assembly method  

DOE Patents [OSTI]

A method for fusing together, using diffusion bonding, micromachine subassemblies which are separately fabricated is described. A first and second micromachine subassembly are fabricated on a first and second substrate, respectively. The substrates are positioned so that the upper surfaces of the two micromachine subassemblies face each other and are aligned so that the desired assembly results from their fusion. The upper surfaces are then brought into contact, and the assembly is subjected to conditions suited to the desired diffusion bonding.

Christenson, Todd R. (Albuquerque, NM)

2001-01-01T23:59:59.000Z

250

Radiation delivery system and method  

DOE Patents [OSTI]

A radiation delivery system and method are described. The system includes a treatment configuration such as a stent, balloon catheter, wire, ribbon, or the like, a portion of which is covered with a gold layer. Chemisorbed to the gold layer is a radiation-emitting self-assembled monolayer or a radiation-emitting polymer. The radiation delivery system is compatible with medical catheter-based technologies to provide a therapeutic dose of radiation to a lesion following an angioplasty procedure.

Sorensen, Scott A. (Overland Park, KS); Robison, Thomas W. (Los Alamos, NM); Taylor, Craig M. V. (Jemez Springs, NM)

2002-01-01T23:59:59.000Z

251

Method of migrating seismic records  

DOE Patents [OSTI]

The present invention provides a method of migrating seismic records that retains the information in the seismic records and allows migration with significant reductions in computing cost. The present invention comprises phase encoding seismic records and combining the encoded seismic records before migration. Phase encoding can minimize the effect of unwanted cross terms while still allowing significant reductions in the cost to migrate a number of seismic records.

Ober, Curtis C. (Las Lunas, NM); Romero, Louis A. (Albuquerque, NM); Ghiglia, Dennis C. (Longmont, CO)

2000-01-01T23:59:59.000Z

252

Ferroelectric infrared detector and method  

DOE Patents [OSTI]

An apparatus and method are provided for sensing infrared radiation. The apparatus includes a sensor element that is positioned in a magnetic field during operation to ensure a .lamda. shaped relationship between specific heat and temperature adjacent the Curie temperature of the ferroelectric material comprising the sensor element. The apparatus is operated by inducing a magnetic field on the ferroelectric material to reduce surface charge on the element during its operation.

Lashley, Jason Charles (Sante Fe, NM); Opeil, Cyril P. (Chestnut Hill, MA); Smith, James Lawrence (Los Alamos, NM)

2010-03-30T23:59:59.000Z

253

Thermal well-test method  

DOE Patents [OSTI]

A well-test method involving injection of hot (or cold) water into a groundwater aquifer, or injecting cold water into a geothermal reservoir. By making temperature measurements at various depths in one or more observation wells, certain properties of the aquifer are determined. These properties, not obtainable from conventional well test procedures, include the permeability anisotropy, and layering in the aquifer, and in-situ thermal properties. The temperature measurements at various depths are obtained from thermistors mounted in the observation wells.

Tsang, Chin-Fu (Albany, CA); Doughty, Christine A. (Berkeley, CA)

1985-01-01T23:59:59.000Z

254

Vibration damping method and apparatus  

DOE Patents [OSTI]

The present invention provides vibration damping method and apparatus that can damp vibration in more than one direction without requiring disassembly, that can accommodate varying tool dimensions without requiring re-tuning, and that does not interfere with tool tip operations and cooling. The present invention provides active dampening by generating bending moments internal to a structure such as a boring bar to dampen vibration thereof. 38 figs.

Redmond, J.M.; Barney, P.S.; Parker, G.G.; Smith, D.A.

1999-06-22T23:59:59.000Z

255

Methods of recovering alkali metals  

DOE Patents [OSTI]

Approaches for alkali metal extraction, sequestration and recovery are described. For example, a method of recovering alkali metals includes providing a CST or CST-like (e.g., small pore zeolite) material. The alkali metal species is scavenged from the liquid mixture by the CST or CST-like material. The alkali metal species is extracted from the CST or CST-like material.

Krumhansl, James L; Rigali, Mark J

2014-03-04T23:59:59.000Z

256

Nuclear methods in environmental and energy research  

SciTech Connect (OSTI)

A total of 75 papers were presented on nuclear methods for analysis of environmental and biological samples. Sessions were devoted to software and mathematical methods; nuclear methods in atmospheric and water research; nuclear and atomic methodology; nuclear methods in biology and medicine; and nuclear methods in energy research.

Vogt, J R [ed.

1980-01-01T23:59:59.000Z

257

NOx reduction methods and apparatuses  

DOE Patents [OSTI]

A NO.sub.x reduction method includes treating a first gas containing NO.sub.x, producing a second gas containing NO.sub.2, reducing a portion of the NO.sub.2 in the second gas to N.sub.2, and producing a third gas containing less NO.sub.x than the first gas, substantially all of the third gas NO.sub.x being NO. The method also includes treating the third gas, producing a fourth gas containing NO.sub.2, reducing a portion of the NO.sub.2 in the fourth gas to N.sub.2, and producing a fifth gas containing less NO.sub.x than the third gas, substantially all of the fifth gas NO.sub.x being NO. Treating the first and/or third gas can include treatment with a plasma. Reducing a portion of the NO.sub.2 in the second and/or fourth gas can include reducing with a catalyst. The method can further include controlling energy consumption of the plasmas independent of each other.

Tonkyn, Russell G.; Barlow, Stephan E.; Balmer, M. Lou; Maupin, Gary D.

2004-10-26T23:59:59.000Z

258

Pulse measurement apparatus and method  

DOE Patents [OSTI]

An embodiment of the invention is directed to a pulse measuring system that measures a characteristic of an input pulse under test, particularly the pulse shape of a single-shot, nano-second duration, high shape-contrast optical or electrical pulse. An exemplary system includes a multi-stage, passive pulse replicator, wherein each successive stage introduces a fixed time delay to the input pulse under test, a repetitively-gated electronic sampling apparatus that acquires the pulse train including an entire waveform of each replica pulse, a processor that temporally aligns the replicated pulses, and an averager that temporally averages the replicated pulses to generate the pulse shape of the pulse under test. An embodiment of the invention is directed to a method for measuring an optical or an electrical pulse shape. The method includes the steps of passively replicating the pulse under test with a known time delay, temporally stacking the pulses, and temporally averaging the stacked pulses. An embodiment of the invention is directed to a method for increasing the dynamic range of a pulse measurement by a repetitively-gated electronic sampling device having a rated dynamic range capability, beyond the rated dynamic range of the sampling device; e.g., enhancing the dynamic range of an oscilloscope. The embodied technique can improve the SNR from about 300:1 to 1000:1. A dynamic range enhancement of four to seven bits may be achieved.

Marciante, John R. (Webster, NY); Donaldson, William R. (Pittsford, NY); Roides, Richard G. (Scottsville, NY)

2011-10-25T23:59:59.000Z

259

Airborne wireless communication systems, airborne communication methods, and communication methods  

DOE Patents [OSTI]

An airborne wireless communication system includes circuitry configured to access information describing a configuration of a terrestrial wireless communication base station that has become disabled. The terrestrial base station is configured to implement wireless communication between wireless devices located within a geographical area and a network when the terrestrial base station is not disabled. The circuitry is further configured, based on the information, to configure the airborne station to have the configuration of the terrestrial base station. An airborne communication method includes answering a 911 call from a terrestrial cellular wireless phone using an airborne wireless communication system.

Deaton, Juan D. (Menan, ID); Schmitt, Michael J. (Idaho Falls, ID); Jones, Warren F. (Idaho Falls, ID)

2011-12-13T23:59:59.000Z

260

Utility Solar Generation Valuation Methods  

SciTech Connect (OSTI)

Tucson Electric Power (TEP) developed, tested and verified the results of a new and appropriate method for accurately evaluating the capacity credit of time variant solar generating sources and reviewed new methods to appropriately and fairly evaluate the value of solar generation to electric utilities. The project also reviewed general integrated approaches for adequately compensating owners of solar generation for their benefits to utilities. However, given the limited funding support and time duration of this project combined with the significant differences between utilities regarding rate structures, solar resource availability and coincidence of solar generation with peak load periods, it is well beyond the scope of this project to develop specific rate, rebate, and interconnection approaches to capture utility benefits for all possible utilities. The project developed computer software based evaluation method models to compare solar generation production data measured in very short term time increments called Sample Intervals over a typical utility Dispatch Cycle during an Evaluation Period against utility system load data. Ten second resolution generation production data from the SGSSS and actual one minute resolution TEP system load data for 2006 and 2007, along with data from the Pennington Street Garage 60 kW DC capacity solar unit installed in downtown Tucson will be applied to the model for testing and verification of the evaluation method. Data was provided by other utilities, but critical time periods of data were missing making results derived from that data inaccurate. The algorithms are based on previous analysis and review of specific 2005 and 2006 SGSSS production data. The model was built, tested and verified by in house TEP personnel. For this phase of the project, TEP communicated with, shared solar production data with and collaborated on the development of solar generation valuation tools with other utilities, including Arizona Public Service, Salt River Project, Xcel and Nevada Power Company as well as the Arizona electric cooperatives. In the second phase of the project, three years of 10 second power output data of the SGSSS was used to evaluate the effectiveness of frequency domain analysis, normal statistical distribution analysis and finally maximum/minimum differential output analysis to test the applicability of these mathematic methods in accurately modeling the output variations produced by clouds passing over the SGSSS array.

Hansen, Thomas N.; Dion, Phillip J.

2009-06-30T23:59:59.000Z

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Active-set methods for quadratic programming  

E-Print Network [OSTI]

definite, the conjugate-gradient method can be applied.SQOPT switches to a conjugate-gradient method to solve for aand Nonlinear Conjugate Gradient-Related Methods, pages 92–

Wong, Elizabeth Lai Sum

2011-01-01T23:59:59.000Z

262

Methods for PDE-constrained optimization  

E-Print Network [OSTI]

3.3.1 Conjugate-gradient method . . . . . . . . . . .3.3.2 The preconditioned conjugate-gradient method 3.3.3The Lanczos conjugate-gradient method . . . . 3.4 The

Reed, Joseph Robert

2011-01-01T23:59:59.000Z

263

Analytical methods for VLSI module placement  

E-Print Network [OSTI]

in Figure 2.6. The conjugate gradient method is quite usefulIn general, the conjugate gradient method ?nds the minimumexactly. Variant of conjugate gradient methods di?er in how

Wang, Qinke

2006-01-01T23:59:59.000Z

264

Alternate Cooling Methods for Industrial Plants  

E-Print Network [OSTI]

refrigerants has caused many plants to evaluate existing cooling methods. This paper presents case studies on alternate cooling methods used for space conditioning at several different industrial facilities. Methods discussed include direct and indirect...

Brown, M.; Moore, D.

265

Methods and compounds for chemical ligation  

DOE Patents [OSTI]

Compositions and methods for chemical ligation are provided. Methods for nucleic acid sequencing, nucleic acid assembly and nucleic acid synthesis are also provided.

Church, George M.; Sismour, A. Michael

2013-07-09T23:59:59.000Z

266

Uniform Methods Project Contacts | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Contacts Uniform Methods Project Contacts The primary contacts for the Uniform Methods Project are: U.S. Department of Energy Michael Li Carla Frisch National Renewable Energy...

267

Assessment of Evaluation, Measurement, and Verification Methods...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Assessment of Evaluation, Measurement, and Verification Methods - 2014 BTO Peer Review Assessment of Evaluation, Measurement, and Verification Methods - 2014 BTO Peer Review...

268

Sparse Approximation via Penalty Decomposition Methods  

E-Print Network [OSTI]

the BCD method is a saddle point of the penalty subproblem. Moreover, when ...... The codes of all the methods implemented in this section are written in. Matlab ...

2012-05-28T23:59:59.000Z

269

Building Energy Optimization Analysis Method (BEopt) - Building...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Optimization Analysis Method (BEopt) - Building America Top Innovation Building Energy Optimization Analysis Method (BEopt) - Building America Top Innovation House graphic...

270

Advanced Computational Methods for Turbulence and Combustion...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Advanced Computational Methods for Turbulence and Combustion Advanced Computational Methods for Turbulence and Combustion Bell.png Key Challenges: Development and application of...

271

A DISTRIBUTED, SCALEABLE SIMPLEX METHOD 1. Introduction ...  

E-Print Network [OSTI]

Hall and McKinnon [1997] and Shu and Wu, [1993] worked on parallel revised methods. Thomadakis & Liu [1996] worked on the standard method utilizing the ...

Stephen Wright

2005-08-31T23:59:59.000Z

272

Characterizing Test Methods and Emissions Reduction Performance...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Test Methods and Emissions Reduction Performance of In-Use Diesel Retrofit Technologies from the National Clean Diesel Campaign Characterizing Test Methods and Emissions Reduction...

273

Hydrogen Fuel Quality - Focus: Analytical Methods Development...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Fuel Quality - Focus: Analytical Methods Development & Hydrogen Fuel Quality Results Hydrogen Fuel Quality - Focus: Analytical Methods Development & Hydrogen Fuel Quality Results...

274

Method for detecting an element  

DOE Patents [OSTI]

A method for detecting an element is disclosed and which includes the steps of providing a gamma-ray spectrum which depicts, at least in part, a test region having boundaries, and which has a small amount of the element to be detected; providing a calculation which detects the small amount of the element to be detected; and providing a moving window and performing the calculation within the moving window, and over a range of possible window boundaries within the test region to determine the location of the optimal test region within the gamma-ray spectrum.

Blackwood, Larry G.; Reber, Edward L.; Rohde, Kenneth W.

2007-02-06T23:59:59.000Z

275

Methanol tailgas combustor control method  

DOE Patents [OSTI]

A method for controlling the power and temperature and fuel source of a combustor in a fuel cell apparatus to supply heat to a fuel processor where the combustor has dual fuel inlet streams including a first fuel stream, and a second fuel stream of anode effluent from the fuel cell and reformate from the fuel processor. In all operating modes, an enthalpy balance is determined by regulating the amount of the first and/or second fuel streams and the quantity of the first air flow stream to support fuel processor power requirements.

Hart-Predmore, David J. (Rochester, NY); Pettit, William H. (Rochester, NY)

2002-01-01T23:59:59.000Z

276

Power control system and method  

DOE Patents [OSTI]

A power system includes an energy harvesting device, a battery coupled to the energy harvesting device, and a circuit coupled to the energy harvesting device and the battery. The circuit is adapted to deliver power to a load by providing power generated by the energy harvesting device to the load without delivering excess power to the battery and to supplement the power generated by the energy harvesting device with power from the battery if the power generated by the energy harvesting device is insufficient to fully power the load. A method of operating the power system is also provided.

Steigerwald, Robert Louis (Burnt Hills, NY) [Burnt Hills, NY; Anderson, Todd Alan (Niskayuna, NY) [Niskayuna, NY

2008-02-19T23:59:59.000Z

277

Hypervelocity cutting machine and method  

DOE Patents [OSTI]

A method and machine are provided for cutting a workpiece such as concrete. A gun barrel is provided for repetitively loading projectiles therein and is supplied with a pressurized propellant from a storage tank. A thermal storage tank is disposed between the propellant storage tank and the gun barrel for repetitively receiving and heating propellant charges which are released in the gun barrel for repetitively firing projectiles therefrom toward the workpiece. In a preferred embodiment, hypervelocity of the projectiles is obtained for cutting the concrete workpiece by fracturing thereof. 10 figs.

Powell, J.R.; Reich, M.

1996-11-12T23:59:59.000Z

278

Thermal well-test method  

DOE Patents [OSTI]

A well-test method involving injection of hot (or cold) water into a groundwater aquifer, or injecting cold water into a geothermal reservoir is disclosed. By making temperature measurements at various depths in one or more observation wells, certain properties of the aquifer are determined. These properties, not obtainable from conventional well test procedures, include the permeability anisotropy, and layering in the aquifer, and in-situ thermal properties. The temperature measurements at various depths are obtained from thermistors mounted in the observation wells.

Tsang, C.F.; Doughty, C.A.

1984-02-24T23:59:59.000Z

279

Method for molding ceramic powders  

DOE Patents [OSTI]

A method for molding ceramic powders comprises forming a slurry mixture including ceramic powder, a dispersant for the metal-containing powder, and a monomer solution. The monomer solution includes at least one multifunctional monomer, a free-radical initiator, and an organic solvent. The slurry mixture is transferred to a mold, and the mold containing the slurry mixture is heated to polymerize and crosslink the monomer and form a firm polymer-solvent gel matrix. The solid product may be removed from the mold and heated to first remove the solvent and subsequently remove the polymer, where after the product may be sintered.

Janney, M.A.

1990-01-16T23:59:59.000Z

280

Method for molding ceramic powders  

DOE Patents [OSTI]

A method for molding ceramic powders comprises forming a slurry mixture including ceramic powder, a dispersant for the metal-containing powder, and a monomer solution. The monomer solution includes at least one multifunctional monomer, a free-radical initiator, and an organic solvent. The slurry mixture is transferred to a mold, and the mold containing the slurry mixture is heated to polymerize and crosslink the monomer and form a firm polymer-solvent gel matrix. The solid product may be removed from the mold and heated to first remove the solvent and subsequently remove the polymer, whereafter the product may be sintered.

Janney, Mark A. (Knoxville, TN)

1990-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Power control system and method  

DOE Patents [OSTI]

A power system includes an energy harvesting device, a battery coupled to the energy harvesting device, and a circuit coupled to the energy harvesting device and the battery. The circuit is adapted to deliver power to a load by providing power generated by the energy harvesting device to the load without delivering excess power to the battery and to supplement the power generated by the energy harvesting device with power from the battery if the power generated by the energy harvesting device is insufficient to fully power the load. A method of operating the power system is also provided.

Steigerwald, Robert Louis; Anderson, Todd Alan

2006-11-07T23:59:59.000Z

282

Method of coalbed methane production  

SciTech Connect (OSTI)

This patent describes a method for producing coalbed methane from a coal seam containing coalbed methane and penetrated by at least one injection well and at least one producing well. It comprises: injecting an inert gas through the injection well and into the coal seam. The inert gas being a gas that does not react with the coal under conditions of use and that does not significantly adsorb to the coal; and producing a gas from the production well which consists essentially of the inert gas, coalbed methane, or mixtures thereof.

Puri, R.; Stein, M.H.

1989-11-28T23:59:59.000Z

283

Multispectral imaging method and apparatus  

DOE Patents [OSTI]

A multispectral imaging method and apparatus are described which are adapted for use in determining material properties, especially properties characteristic of abnormal non-dermal cells. A target is illuminated with a narrow band light beam. The target expresses light in response to the excitation. The expressed light is collected and the target's response at specific response wavelengths to specific excitation wavelengths is measured. From the measured multispectral response the target's properties can be determined. A sealed, remote probe and robust components can be used for cervical imaging. 5 figs.

Sandison, D.R.; Platzbecker, M.R.; Vargo, T.D.; Lockhart, R.R.; Descour, M.R.; Richards-Kortum, R.

1999-07-06T23:59:59.000Z

284

Vibration sensing method and apparatus  

DOE Patents [OSTI]

A method and apparatus for nondestructive evaluation of a structure are disclosed. Resonant audio frequency vibrations are excited in the structure to be evaluated and the vibrations are measured and characterized to obtain information about the structure. The vibrations are measured and characterized by reflecting a laser beam from the vibrating structure and directing a substantial portion of the reflected beam back into the laser device used to produce the beam which device is capable of producing an electric signal containing information about the vibration. 4 figs.

Barna, B.A.

1989-04-25T23:59:59.000Z

285

Method of making an electrode  

DOE Patents [OSTI]

Disclosed is a method of coating an electrode on a solid oxygen conductive oxide layer. A coating of particles of an electronic conductor is formed on one surface of the oxide layer and a source of oxygen is applied to the opposite surface of the oxide layer. A metal halide vapor is applied over the electronic conductor and the oxide layer is heated to a temperature sufficient to induce oxygen to diffuse through the oxide layer and react with the metal halide vapor. This results in the growing of a metal oxide coating on the particles of electronic conductor, thereby binding them to the oxide layer.

Isenberg, Arnold O. (Forest Hills Boro, PA)

1986-01-01T23:59:59.000Z

286

Chemical microreactor and method thereof  

DOE Patents [OSTI]

A method for forming a chemical microreactor includes forming at least one capillary microchannel in a substrate having at least one inlet and at least one outlet, integrating at least one heater into the chemical microreactor, interfacing the capillary microchannel with a liquid chemical reservoir at the inlet of the capillary microchannel, and interfacing the capillary microchannel with a porous membrane near the outlet of the capillary microchannel, the porous membrane being positioned beyond the outlet of the capillary microchannel, wherein the porous membrane has at least one catalyst material imbedded therein.

Morse, Jeffrey D. (Martinez, CA); Jankowski, Alan (Livermore, CA)

2011-08-09T23:59:59.000Z

287

Method for discriminative particle selection  

DOE Patents [OSTI]

The invention is a method and means for separating ions or providing an ion beam. The invention generates ions of the isotopes to be separated, and then provides a traveling electric potential hill created by a sequential series of quasi static electric potential hills. By regulating the velocity and potential amplitude of the traveling electric potential hill ionized isotopes are selectively positively or negatively accelerated. Since the ionized isotopes have differing final velocities, the isotopes may be collected separately or used to produce an ion beam of a selected isotope.

Post, Richard F. (Walnut Creek, CA)

1992-01-01T23:59:59.000Z

288

Nitrogen fixation method and apparatus  

DOE Patents [OSTI]

A method and apparatus for achieving nitrogen fixation includes a volumetric electric discharge chamber. The volumetric discharge chamber provides an even distribution of an electron beam, and enables the chamber to be maintained at a controlled energy to pressure (E/p) ratio. An E/p ratio of from 5 to 15 kV/atm of O[sub 2]/cm promotes the formation of vibrationally excited N[sub 2]. Atomic oxygen interacts with vibrationally excited N[sub 2] at a much quicker rate than unexcited N[sub 2], greatly improving the rate at which NO is formed. 1 fig.

Chen, H.L.

1983-08-16T23:59:59.000Z

289

Hypervelocity cutting machine and method  

DOE Patents [OSTI]

A method and machine 14 are provided for cutting a workpiece 12 such as concrete. A gun barrel 16 is provided for repetitively loading projectiles 22 therein and is supplied with a pressurized propellant from a storage tank 28. A thermal storage tank 32,32A is disposed between the propellant storage tank 28 and the gun barrel 16 for repetitively receiving and heating propellant charges which are released in the gun barrel 16 for repetitively firing projectiles 22 therefrom toward the workpiece 12. In a preferred embodiment, hypervelocity of the projectiles 22 is obtained for cutting the concrete workpiece 12 by fracturing thereof.

Powell, James R. (Shoreham, NY); Reich, Morris (Queens, NY)

1996-11-12T23:59:59.000Z

290

Site survey method and apparatus  

DOE Patents [OSTI]

The disclosure of the invention is directed to a site survey ground vehicle based apparatus and method for automatically detecting source materials, such as radioactivity, marking the location of the source materials, such as with paint, and mapping the location of the source materials on a site. The apparatus of the invention is also useful for collecting and analyzing samples. The apparatus includes a ground vehicle, detectors mounted at the front of the ground vehicle, and individual detector supports which follow somewhat irregular terrain to allow consistent and accurate detection, and autolocation equipment. 19 figures.

Oldham, J.G.; Spencer, C.R.; Begley, C.L.; Meyer, H.R.

1991-06-18T23:59:59.000Z

291

Method for measuring surface temperature  

SciTech Connect (OSTI)

The present invention relates to a method for measuring a surface temperature using is a fluorescent temperature sensor or optical thermometer. The sensor includes a solution of 1,3-bis(1-pyrenyl)propane within a 1-butyl-1-1-methyl pyrrolidinium bis(trifluoromethylsulfonyl)imide ionic liquid solvent. The 1,3-bis(1-pyrenyl)propane remains unassociated when in the ground state while in solution. When subjected to UV light, an excited state is produced that exists in equilibrium with an excimer. The position of the equilibrium between the two excited states is temperature dependent.

Baker, Gary A. (Los Alamos, NM); Baker, Sheila N. (Los Alamos, NM); McCleskey, T. Mark (Los Alamos, NM)

2009-07-28T23:59:59.000Z

292

Methods of making transportation fuel  

DOE Patents [OSTI]

A method for producing alkylated hydrocarbons is disclosed. Formation fluid is produced from a subsurface in situ heat treatment process. The formation fluid is separated to produce a liquid stream and a first gas stream. The first gas stream includes olefins. The liquid stream is fractionated to produce at least a second gas stream including hydrocarbons having a carbon number of at least 3. The first gas stream and the second gas stream are introduced into an alkylation unit to produce alkylated hydrocarbons. At least a portion of the olefins in the first gas stream enhance alkylation. The alkylated hydrocarbons may be blended with one or more components to produce transportation fuel.

Roes, Augustinus Wilhelmus Maria (Houston, TX); Mo, Weijian (Sugar Land, TX); Muylle, Michel Serge Marie (Houston, TX); Mandema, Remco Hugo (Houston, TX); Nair, Vijay (Katy, TX)

2012-04-10T23:59:59.000Z

293

Methods of conveying fluids and methods of sublimating solid particles  

DOE Patents [OSTI]

A heat exchanger and associated methods for sublimating solid particles therein, for conveying fluids therethrough, or both. The heat exchanger includes a chamber and a porous member having a porous wall having pores in communication with the chamber and with an interior of the porous member. A first fluid is conveyed into the porous member while a second fluid is conveyed into the porous member through the porous wall. The second fluid may form a positive flow boundary layer along the porous wall to reduce or eliminate substantial contact between the first fluid and the interior of the porous wall. The combined first and second fluids are conveyed out of the porous member. Additionally, the first fluid and the second fluid may each be conveyed into the porous member at different temperatures and may exit the porous member at substantially the same temperature.

Turner, Terry D; Wilding, Bruce M

2013-10-01T23:59:59.000Z

294

Methods of forming thermal management systems and thermal management methods  

DOE Patents [OSTI]

A thermal management system for a vehicle includes a heat exchanger having a thermal energy storage material provided therein, a first coolant loop thermally coupled to an electrochemical storage device located within the first coolant loop and to the heat exchanger, and a second coolant loop thermally coupled to the heat exchanger. The first and second coolant loops are configured to carry distinct thermal energy transfer media. The thermal management system also includes an interface configured to facilitate transfer of heat generated by an internal combustion engine to the heat exchanger via the second coolant loop in order to selectively deliver the heat to the electrochemical storage device. Thermal management methods are also provided.

Gering, Kevin L.; Haefner, Daryl R.

2012-06-05T23:59:59.000Z

295

Method of pyrolyzing brown coal  

SciTech Connect (OSTI)

A two-step method and apparatus are disclosed based on the fluidized bed principle, for the production of coke, rich gas and pyrolysis tar, with the object of executing the method in a compact apparatus arrangement, with high energy efficiency and high throughput capacity. This is accomplished by a sequence in which the fine grains removed from the drying vapor mixture are removed from the actual pyrolysis process, and a hot gas, alien to the carbonization, is used as fluidization medium in the pyrolysis reactor, and with a hot gas-high performance separator being used for the dust separation from the pyrolysis gas, with the combustion exhaust gas produced in the combustion chamber being used for the indirect heating of the fluidization medium, for the pre-heating of the gas, which is alien to the carbonization, and for the direct heating in the dryer. The dryer has a double casing in the area of the fluidized bed, and a mixing chamber is arranged directly underneath its initial flow bottom, while the pyrolysis reactor is directly connected to the combustion chamber and the pre-heater.

Michel, W.; Heberlein, I.; Ossowski, M.; Paul, H.; Rummel, A.; Seher, G.

1985-08-06T23:59:59.000Z

296

ISOTOPE METHODS IN HOMOGENEOUS CATALYSIS.  

SciTech Connect (OSTI)

The use of isotope labels has had a fundamentally important role in the determination of mechanisms of homogeneously catalyzed reactions. Mechanistic data is valuable since it can assist in the design and rational improvement of homogeneous catalysts. There are several ways to use isotopes in mechanistic chemistry. Isotopes can be introduced into controlled experiments and followed where they go or don't go; in this way, Libby, Calvin, Taube and others used isotopes to elucidate mechanistic pathways for very different, yet important chemistries. Another important isotope method is the study of kinetic isotope effects (KIEs) and equilibrium isotope effect (EIEs). Here the mere observation of where a label winds up is no longer enough - what matters is how much slower (or faster) a labeled molecule reacts than the unlabeled material. The most careti studies essentially involve the measurement of isotope fractionation between a reference ground state and the transition state. Thus kinetic isotope effects provide unique data unavailable from other methods, since information about the transition state of a reaction is obtained. Because getting an experimental glimpse of transition states is really tantamount to understanding catalysis, kinetic isotope effects are very powerful.

BULLOCK,R.M.; BENDER,B.R.

2000-12-01T23:59:59.000Z

297

Method of determining glass durability  

DOE Patents [OSTI]

A process for determining one or more leachate concentrations of one or more components of a glass composition in an aqueous solution of the glass composition by identifying the components of the glass composition, including associated oxides, determining a preliminary glass dissolution estimator, .DELTA.G.sub.p, based upon the free energies of hydration for the component reactant species, determining an accelerated glass dissolution function, .DELTA.G.sub.a, based upon the free energy associated with weak acid dissociation, .DELTA.G.sub.a.sup.WA, and accelerated matrix dissolution at high pH, .DELTA.G.sub.a.sup.SB associated with solution strong base formation, and determining a final hydration free energy, .DELTA.G.sub.f. This final hydration free energy is then used to determine leachate concentrations for elements of interest using a regression analysis and the formula log.sub.10 (N C.sub.i (g/L))=a.sub.i +b.sub.i .DELTA.G.sub.f. The present invention also includes a method to determine whether a particular glass to be produced will be homogeneous or phase separated. The present invention is also directed to methods of monitoring and controlling processes for making glass using these determinations to modify the feedstock materials until a desired glass durability and homogeneity is obtained.

Jantzen, Carol Maryanne (Aiken, SC); Pickett, John Butler (Aiken, SC); Brown, Kevin George (Augusta, GA); Edwards, Thomas Barry (Aiken, SC)

1998-01-01T23:59:59.000Z

298

Method of determining glass durability  

DOE Patents [OSTI]

A process is described for determining one or more leachate concentrations of one or more components of a glass composition in an aqueous solution of the glass composition by identifying the components of the glass composition, including associated oxides, determining a preliminary glass dissolution estimator, {Delta}G{sub p}, based upon the free energies of hydration for the component reactant species, determining an accelerated glass dissolution function, {Delta}G{sub a}, based upon the free energy associated with weak acid dissociation, {Delta}G{sub a}{sup WA}, and accelerated matrix dissolution at high pH, {Delta}G{sub a}{sup SB} associated with solution strong base formation, and determining a final hydration free energy, {Delta}G{sub f}. This final hydration free energy is then used to determine leachate concentrations for elements of interest using a regression analysis and the formula log{sub 10}(N C{sub i}(g/L))=a{sub i} + b{sub i}{Delta}G{sub f}. The present invention also includes a method to determine whether a particular glass to be produced will be homogeneous or phase separated. The present invention is also directed to methods of monitoring and controlling processes for making glass using these determinations to modify the feedstock materials until a desired glass durability and homogeneity is obtained. 4 figs.

Jantzen, C.M.; Pickett, J.B.; Brown, K.G.; Edwards, T.B.

1998-12-08T23:59:59.000Z

299

Method of photon spectral analysis  

DOE Patents [OSTI]

A spectroscopic method to rapidly measure the presence of plutonium in soils, filters, smears, and glass waste forms by measuring the uranium L-shell x-ray emissions associated with the decay of plutonium. In addition, the technique can simultaneously acquire spectra of samples and automatically analyze them for the amount of americium and [gamma]-ray emitting activation and fission products present. The samples are counted with a large area, thin-window, n-type germanium spectrometer which is equally efficient for the detection of low-energy x-rays (10-2,000 keV), as well as high-energy [gamma] rays (>1 MeV). A 8,192- or 16,384 channel analyzer is used to acquire the entire photon spectrum at one time. A dual-energy, time-tagged pulser, that is injected into the test input of the preamplifier to monitor the energy scale, and detector resolution. The L x-ray portion of each spectrum is analyzed by a linear-least-squares spectral fitting technique. The [gamma]-ray portion of each spectrum is analyzed by a standard Ge [gamma]-ray analysis program. This method can be applied to any analysis involving x- and [gamma]-ray analysis in one spectrum and is especially useful when interferences in the x-ray region can be identified from the [gamma]-ray analysis and accommodated during the x-ray analysis.

Gehrke, R.J.; Putnam, M.H.; Killian, E.W.; Helmer, R.G.; Kynaston, R.L.; Goodwin, S.G.; Johnson, L.O.

1993-04-27T23:59:59.000Z

300

Method to improve superconductor cable  

DOE Patents [OSTI]

A method is disclosed of making a stranded superconductor cable having improved flexing and bending characteristics. In such method, a plurality of superconductor strands are helically wound around a cylindrical portion of a mandrel which tapers along a transitional portion to a flat end portion. The helically wound strands form a multistrand hollow cable which is partially flattened by pressure rollers as the cable travels along the transitional portion. The partially flattened cable is impacted with repeated hammer blows as the hollow cable travels along the flat end portion. The hammer blows flatten both the internal and the external surfaces of the strands. The cable is fully flattened and compacted by two sets of pressure rollers which engage the flat sides and the edges of the cable after it has traveled away from the flat end portion of the mandrel. The flattened internal surfaces slide easily over one another when the cable is flexed or bent so that there is very little possibility that the cable will be damaged by the necessary flexing and bending required to wind the cable into magnet coils.

Borden, A.R.

1984-03-08T23:59:59.000Z

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Method for processing aqueous wastes  

DOE Patents [OSTI]

A method is presented for treating waste water such as that from an industrial processing facility comprising the separation of the waste water into a dilute waste stream and a concentrated waste stream. The concentrated waste stream is treated chemically to enhance precipitation and then allowed to separate into a sludge and a supernate. The supernate is skimmed or filtered from the sludge and blended with the dilute waste stream to form a second dilute waste stream. The sludge remaining is mixed with cementitious material, rinsed to dissolve soluble components, then pressed to remove excess water and dissolved solids before being allowed to cure. The dilute waste stream is also chemically treated to decompose carbonate complexes and metal ions and then mixed with cationic polymer to cause the precipitated solids to flocculate. Filtration of the flocculant removes sufficient solids to allow the waste water to be discharged to the surface of a stream. The filtered material is added to the sludge of the concentrated waste stream. The method is also applicable to the treatment and removal of soluble uranium from aqueous streams, such that the treated stream may be used as a potable water supply. 4 figures.

Pickett, J.B.; Martin, H.L.; Langton, C.A.; Harley, W.W.

1993-12-28T23:59:59.000Z

302

Methods for degrading lignocellulosic materials  

SciTech Connect (OSTI)

The present invention relates to methods for degrading a lignocellulosic material, comprising: treating the lignocellulosic material with an effective amount of one or more cellulolytic enzymes in the presence of at least one surfactant selected from the group consisting of a secondary alcohol ethoxylate, fatty alcohol ethoxylate, nonylphenol ethoxylate, tridecyl ethoxylate, and polyoxyethylene ether, wherein the presence of the surfactant increases the degradation of lignocellulosic material compared to the absence of the surfactant. The present invention also relates to methods for producing an organic substance, comprising: (a) saccharifying a lignocellulosic material with an effective amount of one or more cellulolytic enzymes in the presence of at least one surfactant selected from the group consisting of a secondary alcohol ethoxylate, fatty alcohol ethoxylate, nonylphenol ethoxylate, tridecyl ethoxylate, and polyoxyethylene ether, wherein the presence of the surfactant increases the degradation of lignocellulosic material compared to the absence of the surfactant; (b) fermenting the saccharified lignocellulosic material of step (a) with one or more fermenting microorganisms; and (c) recovering the organic substance from the fermentation.

Vlasenko, Elena (Davis, CA); Cherry, Joel (Davis, CA); Xu, Feng (Davis, CA)

2011-05-17T23:59:59.000Z

303

Method of monitoring crystal growth  

DOE Patents [OSTI]

A system and method are disclosed for monitoring the growth of a crystalline body from a liquid meniscus in a furnace. The system provides an improved human/machine interface so as to reduce operator stress, strain and fatigue while improving the conditions for observation and control of the growing process. The system comprises suitable optics for forming an image of the meniscus and body wherein the image is anamorphic so that the entire meniscus can be viewed with good resolution in both the width and height dimensions. The system also comprises a video display for displaying the anamorphic image. The video display includes means for enhancing the contrast between any two contrasting points in the image. The video display also comprises a signal averager for averaging the intensity of at least one preselected portions of the image. The value of the average intensity, can in turn be utilized to control the growth of the body. The system and method are also capable of observing and monitoring multiple processes.

Sachs, Emanual M. (Watertown, MA)

1982-01-01T23:59:59.000Z

304

Infrared emitting device and method  

DOE Patents [OSTI]

An infrared emitting device and method. The infrared emitting device comprises a III-V compound semiconductor substrate upon which are grown a quantum-well active region having a plurality of quantum-well layers formed of a ternary alloy comprising InAsSb sandwiched between barrier layers formed of a ternary alloy having a smaller lattice constant and a larger energy bandgap than the quantum-well layers. The quantum-well layers are preferably compressively strained to increase the threshold energy for Auger recombination; and a method is provided for determining the preferred thickness for the quantum-well layers. Embodiments of the present invention are described having at least one cladding layer to increase the optical and carrier confinement in the active region, and to provide for waveguiding of the light generated within the active region. Examples have been set forth showing embodiments of the present invention as surface- and edge-emitting light emitting diodes (LEDs), an optically-pumped semiconductor laser, and an electrically-injected semiconductor diode laser. The light emission from each of the infrared emitting devices of the present invention is in the midwave infrared region of the spectrum from about 2 to 6 microns.

Kurtz, Steven R. (Albuquerque, NM); Biefeld, Robert M. (Albuquerque, NM); Dawson, L. Ralph (Albuquerque, NM); Howard, Arnold J. (Albuquerque, NM); Baucom, Kevin C. (Albuquerque, NM)

1997-01-01T23:59:59.000Z

305

Method of detecting sulfur dioxide  

DOE Patents [OSTI]

(CH.sub.3).sub.3 SiNSO is produced by the reaction of ((CH.sub.3).sub.3 Si).sub.2 NH with SO.sub.2. Also produced in the reaction are ((CH.sub.3).sub.3 Si).sub.2 O and a new solid compound [NH.sub.4 ][(CH.sub.3).sub.3 SiOSO.sub.2 ]. Both (CH.sub.3).sub.3 SiNSO and [NH.sub.4 ][(CH.sub.3).sub.3 SiOSO.sub.2 ] have fluorescent properties. The reaction of the subject invention is used in a method of measuring the concentration of SO.sub.2 pollutants in gases. By the method, a sample of gas is bubbled through a solution of ((CH.sub.3).sub.3 Si).sub.2 NH, whereby any SO.sub.2 present in the gas will react to produce the two fluorescent products. The measured fluorescence of these products can then be used to calculate the concentration of SO.sub.2 in the original gas sample. The solid product [NH.sub.4][(CH.sub.3).sub.3 SiOSO.sub.2 ] may be used as a standard in solid state NMR spectroscopy.

Spicer, Leonard D. (Salt Lake City, UT); Bennett, Dennis W. (Clemson, SC); Davis, Jon F. (Salt Lake City, UT)

1985-01-01T23:59:59.000Z

306

Method of photon spectral analysis  

DOE Patents [OSTI]

A spectroscopic method to rapidly measure the presence of plutonium in soils, filters, smears, and glass waste forms by measuring the uranium L-shell x-ray emissions associated with the decay of plutonium. In addition, the technique can simultaneously acquire spectra of samples and automatically analyze them for the amount of americium and .gamma.-ray emitting activation and fission products present. The samples are counted with a large area, thin-window, n-type germanium spectrometer which is equally efficient for the detection of low-energy x-rays (10-2000 keV), as well as high-energy .gamma. rays (>1 MeV). A 8192- or 16,384 channel analyzer is used to acquire the entire photon spectrum at one time. A dual-energy, time-tagged pulser, that is injected into the test input of the preamplifier to monitor the energy scale, and detector resolution. The L x-ray portion of each spectrum is analyzed by a linear-least-squares spectral fitting technique. The .gamma.-ray portion of each spectrum is analyzed by a standard Ge .gamma.-ray analysis program. This method can be applied to any analysis involving x- and .gamma.-ray analysis in one spectrum and is especially useful when interferences in the x-ray region can be identified from the .gamma.-ray analysis and accommodated during the x-ray analysis.

Gehrke, Robert J. (Idaho Falls, ID); Putnam, Marie H. (Idaho Falls, ID); Killian, E. Wayne (Idaho Falls, ID); Helmer, Richard G. (Idaho Falls, ID); Kynaston, Ronnie L. (Blackfoot, ID); Goodwin, Scott G. (Idaho Falls, ID); Johnson, Larry O. (Pocatello, ID)

1993-01-01T23:59:59.000Z

307

Method for processing aqueous wastes  

DOE Patents [OSTI]

A method for treating waste water such as that from an industrial processing facility comprising the separation of the waste water into a dilute waste stream and a concentrated waste stream. The concentrated waste stream is treated chemically to enhance precipitation and then allowed to separate into a sludge and a supernate. The supernate is skimmed or filtered from the sludge and blended with the dilute waste stream to form a second dilute waste stream. The sludge remaining is mixed with cementitious material, rinsed to dissolve soluble components, then pressed to remove excess water and dissolved solids before being allowed to cure. The dilute waste stream is also chemically treated to decompose carbonate complexes and metal ions and then mixed with cationic polymer to cause the precipitated solids to flocculate. Filtration of the flocculant removes sufficient solids to allow the waste water to be discharged to the surface of a stream. The filtered material is added to the sludge of the concentrated waste stream. The method is also applicable to the treatment and removal of soluble uranium from aqueous streams, such that the treated stream may be used as a potable water supply.

Pickett, John B. (3922 Wood Valley Dr., Aiken, SC 29803); Martin, Hollis L. (Rt. 1, Box 188KB, McCormick, SC 29835); Langton, Christine A. (455 Sumter St. SE., Aiken, SC 29801); Harley, Willie W. (110 Fairchild St., Batesburg, SC 29006)

1993-01-01T23:59:59.000Z

308

Qualitative methods for assessing risk  

SciTech Connect (OSTI)

The Department of Energy`s (DOE) non-nuclear facilities generally require only a qualitative accident analysis to assess facility risks in accordance with DOE Order 5481.1B, Safety Analysis and Review System. Achieving a meaningful qualitative assessment of risk necessarily requires the use of suitable non-numerical assessment criteria. Typically, the methods and criteria for assigning facility-specific accident scenarios to the qualitative severity and likelihood classification system in the DOE order requires significant judgment in many applications. Systematic methods for more consistently assigning the total accident scenario frequency and associated consequences are required to substantiate and enhance future risk ranking between various activities at Sandia National Laboratories (SNL). SNL`s Risk Management and National Environmental Policy Act (NEPA) Department has developed an improved methodology for performing qualitative risk assessments in accordance wi the DOE order requirements. Products of this effort are an improved set of qualitative description that permit (1) definition of the severity for both technical and programmatic consequences that may result from a variety of accident scenarios, and (2) qualitative representation of the likelihood of occurrence. These sets of descriptions are intended to facilitate proper application of DOE criteria for assessing facility risks.

Mahn, J.A. [Sandia National Labs., Albuquerque, NM (United States); Hannaman, G.W. [Science Applications International Corp., San Diego, CA (United States); Kryska, P. [Science Applications International Corp., Albuquerque, NM (United States)

1995-04-01T23:59:59.000Z

309

Performance estimation using correlation methods  

SciTech Connect (OSTI)

Correlation methods of prediction have advantages in greatly simplifying the time and complexity of performance predictions of passive solar buildings but are severely constrained in the number of variables which can be considered. Their accuracy is generally adequate for design purposes provided they are applied to buildings which correspond reasonably closely to the reference designs used in developing the correlations. The most simplified correlation procedures (such as the SLR method) are amenable to use with hand calculators, especially if pre-calculated tables are available corresponding to the weather data for the location of interest. When reporting the results of these calculations, the designer should be especially careful to specify the range of validity of the analysis, especially as pertains to both operating characteristics and design parameters. Correlation techniques are especially amenable to use in microcomputer routines which can be used in a design office. Very quick answers can be obtained during the schematic design and design development phases of a building to aid in deciding between different design options. This would include trade-offs between various conservation options and passive solar options.

Balcomb, J.D.

1980-01-01T23:59:59.000Z

310

An Introduction to the Conjugate Gradient Method  

E-Print Network [OSTI]

An Introduction to the Conjugate Gradient Method Without the Agonizing Pain Edition 11 4 Jonathan Abstract The Conjugate Gradient Method is the most prominent iterative method for solving sparse systems, the Conjugate Gradient Method is a composite of simple, elegant ideas that almost anyone can understand

Zhang, Yi

311

An Introduction to the Conjugate Gradient Method  

E-Print Network [OSTI]

An Introduction to the Conjugate Gradient Method Without the Agonizing Pain Edition 1 1 4 Jonathan Abstract The Conjugate Gradient Method is the most prominent iterative method for solving sparse systems, the Conjugate Gradient Method is a composite of simple, elegant ideas that almost anyone can understand

Shewchuk, Jonathan

312

An Introduction to the Conjugate Gradient Method  

E-Print Network [OSTI]

An Introduction to the Conjugate Gradient Method Without the Agonizing Pain Jonathan Richard 15213 Abstract The Conjugate Gradient Method is the most prominent iterative method for solving sparse the mumblings of their forebears. Nevertheless, the Conjugate Gradient Method is a composite of simple, elegant

313

Compositions and methods for increasing cellulose production  

DOE Patents [OSTI]

This disclosure relates to methods and compositions for genetically altering cellulose biosynthesis.

Yang, Zhenbiao (Riverside, CA); Karr, Stephen (Camarillo, CA)

2012-05-01T23:59:59.000Z

314

INTRODUCTION TO THE FINITE ELEMENT METHOD  

E-Print Network [OSTI]

in popularity with the finite difference method in the areas of heat transfer and fluid mechanics. 1DRAFT Chapter 1 INTRODUCTION TO THE FINITE ELEMENT METHOD 1.1 Historical perspective: the origins of the finite el- ement method The finite element method constitutes a general tool for the numerical solution

California at Berkeley, University of

315

Algebraic methods in vibrational spectroscopy  

SciTech Connect (OSTI)

These lectures review some advances in the algebraic description of molecules from two point of views: structure and dynamics. We start by presenting the basic ideas involved in the traditional description of molecular structure in configuration space, where the Born-Oppenheimer and rotor-rigid approximations are assumed to be valid. We then focus on the vibrational degrees of freedom in order to introduce the traditional algebraic realization in terms of bosonic operators of harmonic oscillators. This analysis allows the algebraic methods based on dynamical unitary groups to be introduced as a anharmonization procedure where the local bosonic operators are translated into operators satisfying the su(2) commutation relations. Some examples of the vibrational spec-troscopic description are presented. Concerned with the dynamical point of view an algebraic model to describe collinear collisions in the semiclassical approximation is presented.

Lemus, Renato [Instituto de Ciencias Nucleares, Universidad Nacional Autonoma de Mexico, Apartado Postal 70-543, 04510 Mexico, DF (Mexico)

2011-03-21T23:59:59.000Z

316

Synthesis gas method and apparatus  

DOE Patents [OSTI]

A method and apparatus for producing a synthesis gas product having one or more oxygen transport membrane elements thermally coupled to one or more catalytic reactors such that heat generated from the oxygen transport membrane element supplies endothermic heating requirements for steam methane reforming reactions occurring within the catalytic reactor through radiation and convention heat transfer. A hydrogen containing stream containing no more than 20 percent methane is combusted within the oxygen transport membrane element to produce the heat and a heated combustion product stream. The heated combustion product stream is combined with a reactant stream to form a combined stream that is subjected to the reforming within the catalytic reactor. The apparatus may include modules in which tubular membrane elements surround a central reactor tube.

Kelly, Sean M.; Kromer, Brian R.; Litwin, Michael M.; Rosen, Lee J.; Christie, Gervase Maxwell; Wilson, Jamie R.; Kosowski, Lawrence W.; Robinson, Charles

2013-01-08T23:59:59.000Z

317

Displacement sensing system and method  

DOE Patents [OSTI]

A displacement sensing system and method addresses demanding requirements for high precision sensing of displacement of a shaft, for use typically in a linear electro-dynamic machine, having low failure rates over multi-year unattended operation in hostile environments. Applications include outer space travel by spacecraft having high-temperature, sealed environments without opportunity for servicing over many years of operation. The displacement sensing system uses a three coil sensor configuration, including a reference and sense coils, to provide a pair of ratio-metric signals, which are inputted into a synchronous comparison circuit, which is synchronously processed for a resultant displacement determination. The pair of ratio-metric signals are similarly affected by environmental conditions so that the comparison circuit is able to subtract or nullify environmental conditions that would otherwise cause changes in accuracy to occur.

VunKannon Jr., Robert S

2006-08-08T23:59:59.000Z

318

Spectral shift reactor control method  

SciTech Connect (OSTI)

The method is described of closely controlling the reactor water coolant temperature of an operating spectral-shift nuclear reactor, the reactor comprising a core formed of fuel assemblies through which the reactor water coolant flows; different types of elongated elements operable to be controllably moved into and out of the core; one type of the elongated elements comprising control rods formed of neutron absorbing material and operable to decrease reactivity through neutron absorption when inserted into the core; another of the types of elongated elements comprising displacer rods formed of material which has a low absorption for neutrons and which have overall neutron-absorbing and moderating characteristics essentially not exceeding those of hollow tubular Zircaloy members with a filling zirconium oxide or aluminum oxide, the displacer rods operating to displace an equivalent volume of water coolant fluid from the core when inserted therein to decrease reactivity and to increase reactivity when moved from the core.

Impink, A.J. Jr.

1987-08-18T23:59:59.000Z

319

Method for producing carbon nanotubes  

DOE Patents [OSTI]

Method for producing carbon nanotubes. Carbon nanotubes were prepared using a low power, atmospheric pressure, microwave-generated plasma torch system. After generating carbon monoxide microwave plasma, a flow of carbon monoxide was directed first through a bed of metal particles/glass beads and then along the outer surface of a ceramic tube located in the plasma. As a flow of argon was introduced into the plasma through the ceramic tube, ropes of entangled carbon nanotubes, attached to the surface of the tube, were produced. Of these, longer ropes formed on the surface portion of the tube located in the center of the plasma. Transmission electron micrographs of individual nanotubes revealed that many were single-walled.

Phillips, Jonathan (Santa Fe, NM); Perry, William L. (Jemez Springs, NM); Chen, Chun-Ku (Albuquerque, NM)

2006-02-14T23:59:59.000Z

320

Dissipative structures and related methods  

DOE Patents [OSTI]

Dissipative structures include at least one panel and a cell structure disposed adjacent to the at least one panel having interconnected cells. A deformable material, which may comprise at least one hydrogel, is disposed within at least one interconnected cell proximate to the at least one panel. Dissipative structures may also include a cell structure having interconnected cells formed by wall elements. The wall elements may include a mesh formed by overlapping fibers having apertures formed therebetween. The apertures may form passageways between the interconnected cells. Methods of dissipating a force include disposing at least one hydrogel in a cell structure proximate to at least one panel, applying a force to the at least one panel, and forcing at least a portion of the at least one hydrogel through apertures formed in the cell structure.

Langhorst, Benjamin R; Chu, Henry S

2013-11-05T23:59:59.000Z

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Method of patterning an aerogel  

DOE Patents [OSTI]

A method for producing a pattern in an aerogel disposed as a coating on a substrate comprises exposing the aerogel coating to the vapors of a hydrophobic silane compound, masking the aerogel coating with a shadow photomask and irradiating the aerogel coating with ultraviolet (UV) irradiation. The exposure to UV through the shadow mask creates a pattern of hydrophobic and hydrophilic regions in the aerogel coating. Etching away the hydrophilic regions of the aerogel coating, preferably with a 1 molar solution of sodium hydroxide, leaves the unwetted and unetched hydrophobic regions of the aerogel layer on the substrate, replicating the pattern of the photomask. The hydrophobic aerogel pattern can be further exposed to UV irradiation if desired, to create a hydrophilic aerogel pattern.

Reed, Scott T. (Edgewood, NM)

2012-07-24T23:59:59.000Z

322

Method of forming structural heliostat  

DOE Patents [OSTI]

In forming a heliostat having a main support structure and pivoting and tilting motors and gears and a mirror module for reflecting solar energy onto a collector, the improvement characterized by a method of forming the mirror module in which the mirror is laid upon a solid rigid supporting bed in one or more sections, with or without focusing; a mirror backing sheet is applied by first applying respective thin layers of silicone grease and, thereafter, progressively rolling application to eliminate air bubbles; followed by affixing of a substrate assembly to the mirror backing sheet to form a mirror module that does not curve because of thermally induced stresses and differential thermal expansion or contraction effects. The silicone grease also serves to dampen fluttering of the mirror and protect the mirror backside against adverse effects of the weather. Also disclosed are specific details of preferred embodiments.

Anderson, Alfred J. (Littleton, CO)

1984-06-26T23:59:59.000Z

323

Freeze chromatography method and apparatus  

DOE Patents [OSTI]

A freeze chromatography method and apparatus are provided which enable separation of the solutes contained in a sample. The apparatus includes an annular column construction comprising cylindrical inner and outer surfaces defining an annular passage therebetween. One of the surfaces is heated and the other cooled while passing an eluent through the annular passageway so that the eluent in contact with the cooled surface freezes and forms a frozen eluent layer thereon. A mixture of solutes dissolved in eluent is passed through the annular passageway in contact with the frozen layer so that the sample solutes in the mixture will tend to migrate either toward or away the frozen layer. The rate at which the mixture flows through the annular passageway is controlled so that the distribution of the sample solutes approaches that at equilibrium and thus a separation between the sample solutes occurs. 3 figs.

Scott, C.D.

1987-04-16T23:59:59.000Z

324

Voltammetric analysis apparatus and method  

DOE Patents [OSTI]

An apparatus and method is described for electrochemical analysis of elements in solution. An auxiliary electrode, a reference electrode, and five working electrodes are positioned in a container containing a sample solution. The working electrodes are spaced apart evenly from each other and the auxiliary electrode to minimize any inter-electrode interference that may occur during analysis. An electric potential is applied between the auxiliary electrode and each of the working electrodes. Simultaneous measurements taken of the current flow through each of the working electrodes for each given potential in a potential range are used for identifying chemical elements present in the sample solution and their respective concentrations. Multiple working electrodes enable a more positive identification to be made by providing unique data characteristic of chemical elements present in the sample solution.

Almon, A.C.

1993-06-08T23:59:59.000Z

325

Method for hermetic electrical connections  

DOE Patents [OSTI]

A method of providing a hermetic, electrical connection between two electrical components by mating at least one metal pin in a glass-ceramic to metal seal connector to two electrical components, wherein the glass-ceramic to metal seal connector incorporates at least one metal pin encased (sealed) in a glass-ceramic material inside of a metal housing, with the glass-ceramic material made from 65-80% SiO.sub.2, 8-16% Li.sub.2O, 2-8% Al.sub.2O.sub.3, 1-5% P.sub.2O.sub.5, 1-8% K.sub.2O, 0.5-7% B.sub.2O.sub.3, and 0-5% ZnO. The connector retains hermeticity at temperatures as high as 700.degree. C. and pressures as high as 500 psi.

Monroe, Saundra L. (Tijeras, NM); Glass, S. Jill (Albuquerque, NM); Stone, Ronnie G. (Albuquerque, NM); Bond, Jamey T. (Albuquerque, NM); Susan, Donald F. (Albuquerque, NM)

2011-12-27T23:59:59.000Z

326

Method for directional hydraulic fracturing  

DOE Patents [OSTI]

A method for directional hydraulic fracturing using borehole seals to confine pressurized fluid in planar permeable regions, comprising: placing a sealant in the hole of a structure selected from geologic or cemented formations to fill the space between a permeable planar component and the geologic or cemented formation in the vicinity of the permeable planar component; making a hydraulic connection between the permeable planar component and a pump; permitting the sealant to cure and thereby provide both mechanical and hydraulic confinement to the permeable planar component; and pumping a fluid from the pump into the permeable planar component to internally pressurize the permeable planar component to initiate a fracture in the formation, the fracture being disposed in the same orientation as the permeable planar component.

Swanson, David E. (West St. Paul, MN); Daly, Daniel W. (Crystal, MN)

1994-01-01T23:59:59.000Z

327

Method for magnesium sulfate recovery  

DOE Patents [OSTI]

A method of obtaining magnesium sulfate substantially free from radioactive uranium from a slag containing the same and having a radioactivity level of at least about 7000 pCi/gm. The slag is ground to a particle size of about 200 microns or less. The ground slag is then contacted with a concentrated sulfuric acid under certain prescribed conditions to produce a liquid product and a solid product. The particulate solid product and a minor amount of the liquid is then treated to produce a solid residue consisting essentially of magnesium sulfate substantially free of uranium and having a residual radioactivity level of less than 1000 pCi/gm. In accordance with the preferred embodiment of the invention, a catalyst and an oxidizing agent are used during the initial acid treatment and a final solid residue has a radioactivity level of less than about 50 pCi/gm.

Gay, Richard L. (Canoga Park, CA); Grantham, LeRoy F. (Calabasas, CA)

1987-01-01T23:59:59.000Z

328

Method for magnesium sulfate recovery  

DOE Patents [OSTI]

A method is described for obtaining magnesium sulfate substantially free from radioactive uranium from a slag containing the same and having a radioactivity level of at least about 7,000 pCi/gm. The slag is ground to a particle size of about 200 microns or less. The ground slag is then contacted with a concentrated sulfuric acid under certain prescribed conditions to produce a liquid product and a solid product. The particulate solid product and a minor amount of the liquid is then treated to produce a solid residue consisting essentially of magnesium sulfate substantially free of uranium and having a residual radioactivity level of less than 1,000 pCi/gm. In accordance with the preferred embodiment of the invention, a catalyst and an oxidizing agent are used during the initial acid treatment and a final solid residue has a radioactivity level of less than about 50 pCi/gm.

Gay, R.L.; Grantham, L.F.

1987-08-25T23:59:59.000Z

329

Method for enhanced oil recovery  

DOE Patents [OSTI]

The present invention is directed to an improved method for enhanced recovery of oil from relatively "cold" reservoirs by carbon dioxide flooding. In oil reservoirs at a temperature less than the critical temperature of 87.7.degree. F. and at a pore pressure greater than the saturation pressure of carbon dioxide at the temperature of the reservoir, the carbon dioxide remains in the liquid state which does not satisfactorily mix with the oil. However, applicants have found that carbon dioxide can be vaporized in situ in the reservoir by selectively reducing the pore pressure in the reservoir to a value less than the particular saturated vapor pressure so as to greatly enhance the mixing of the carbon dioxide with the oil.

Comberiati, Joseph R. (Morgantown, WV); Locke, Charles D. (Morgantown, WV); Kamath, Krishna I. (Chicago, IL)

1980-01-01T23:59:59.000Z

330

Thermal management systems and methods  

DOE Patents [OSTI]

A thermal management system for a vehicle includes a heat exchanger having a thermal energy storage material provided therein, a first coolant loop thermally coupled to an electrochemical storage device located within the first coolant loop and to the heat exchanger, and a second coolant loop thermally coupled to the heat exchanger. The first and second coolant loops are configured to carry distinct thermal energy transfer media. The thermal management system also includes an interface configured to facilitate transfer of heat generated by an internal combustion engine to the heat exchanger via the second coolant loop in order to selectively deliver the heat to the electrochemical storage device. Thermal management methods are also provided.

Gering, Kevin L.; Haefner, Daryl R.

2006-12-12T23:59:59.000Z

331

Method for microbeam radiation therapy  

DOE Patents [OSTI]

A method is disclosed of performing radiation therapy on a patient, involving exposing a target, usually a tumor, to a therapeutic dose of high energy electromagnetic radiation, preferably X-ray radiation. The dose is in the form of at least two non-overlapping microbeams of radiation, each microbeam having a width of less than about 1 millimeter. Target tissue exposed to the microbeams receives a radiation dose during the exposure that exceeds the maximum dose that such tissue can survive. Non-target tissue between the microbeams receives a dose of radiation below the threshold amount of radiation that can be survived by the tissue, and thereby permits the non-target tissue to regenerate. The microbeams may be directed at the target from one direction, or from more than one direction in which case the microbeams overlap within the target tissue enhancing the lethal effect of the irradiation while sparing the surrounding healthy tissue. No Drawings

Slatkin, D.N.; Dilmanian, F.A.; Spanne, P.O.

1994-08-16T23:59:59.000Z

332

Chemical microreactor and method thereof  

DOE Patents [OSTI]

A chemical microreactor suitable for generation of hydrogen fuel from liquid sources such as ammonia, methanol, and butane through steam reforming processes when mixed with an appropriate amount of water contains capillary microchannels with integrated resistive heaters to facilitate the occurrence of catalytic steam reforming reactions. One such microreactor employs a packed catalyst capillary microchannel and at least one porous membrane. Another employs a porous membrane with a large surface area or a porous membrane support structure containing a plurality of porous membranes having a large surface area in the aggregate, i.e., greater than about 1 m.sup.2 /cm.sup.3. The packed catalyst capillary microchannels, porous membranes and porous membrane support structures may be formed by a variety of methods.

Morse, Jeffrey D.; Jankowski, Alan

2005-11-01T23:59:59.000Z

333

Mathematical methods for protein science  

SciTech Connect (OSTI)

Understanding the structure and function of proteins is a fundamental endeavor in molecular biology. Currently, over 100,000 protein sequences have been determined by experimental methods. The three dimensional structure of the protein determines its function, but there are currently less than 4,000 structures known to atomic resolution. Accordingly, techniques to predict protein structure from sequence have an important role in aiding the understanding of the Genome and the effects of mutations in genetic disease. The authors describe current efforts at Sandia to better understand the structure of proteins through rigorous mathematical analyses of simple lattice models. The efforts have focused on two aspects of protein science: mathematical structure prediction, and inverse protein folding.

Hart, W.; Istrail, S.; Atkins, J. [Sandia National Labs., Albuquerque, NM (United States)

1997-12-31T23:59:59.000Z

334

Mud degasser method and apparatus  

SciTech Connect (OSTI)

A method and apparatus for degassing mud is disclosed. The mud, which has been returned from a borehole, is forced to flow upwardly through a main cylindrical housing by the action of an auger device. The auger flight is spaced from the auger shaft, so that a longitudinally extending, axial passageway is formed within the housing for removal of gases from the mud. The auger flight is comprised of a plurality of sections, each axially spaced from one another, with a perforated member being interposed therebetween. The combined action of the flight and the perforated member causes the mud to assume a flow path which releases an unexpected amount of gas therefrom. An annular trough at the top of the housing collects the degasified mud. A closure member at the upper end of the housing enables the axial passageway to be evacuated which enhances the removal of gases from the mud.

Shifflett, W.M.

1981-06-09T23:59:59.000Z

335

Method of forming clathrate ice  

DOE Patents [OSTI]

A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultrasonically so that small crystals are formed in the liquid. These small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

Hino, Toshiyuki (Tokyo, JP); Gorski, Anthony J. (Lemont, IL)

1987-01-01T23:59:59.000Z

336

Method for uniformly bending conduits  

DOE Patents [OSTI]

The present invention is directed to a method for bending metal tubing through various radii while maintaining uniform cross section of the tubing. The present invention is practical by filling the tubing to a sufficient level with water, freezing the water to ice and bending the ice-filled tubing in a cooled die to the desired radius. The use of the ice as a filler material provides uniform cross-sectional bends of the tubing and upon removal of the ice provides an uncontaminated interior of the tubing which will enable it to be used in its intended application without encountering residual contaminants in the tubing due to the presence of the filler material.

Dekanich, S.J.

1984-04-27T23:59:59.000Z

337

Method of forming calthrate ice  

DOE Patents [OSTI]

A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultransonically so that small crystals are formed in the liquid. Thes small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

Hino, T.; Gorski, A.J.

1985-09-30T23:59:59.000Z

338

Method for treating liquid wastes  

DOE Patents [OSTI]

The method of treating liquid waste in a media is accomplished by exposing the media to phosphinimines and sequestering {sup 99}Tc from the media by the phosphinimine (PN) functionalities. The system for treating the liquid waste in the media includes extraction of {sup 99}TcO{sub 4}{sup {minus}} from aqueous solutions into organic solvents or mixed organic/polar media, extraction of {sup 99}Tc from solutions on a solid matrix by using a container containing PN functionalities on solid matrices including an inlet and outlet for allowing flow of media through an immobilized phosphinimine ligand system contained within the container. Also, insoluble suspensions of phosphinimine functionalities on solid matrices in liquid solutions or present on supported liquid membranes (SLM) can be used to sequester {sup 99}Tc from those liquids. 6 figs.

Katti, K.V.; Volkert, W.A.; Singh, P.; Ketring, A.R.

1995-12-26T23:59:59.000Z

339

Method for treating liquid wastes  

DOE Patents [OSTI]

The method of treating liquid waste in a media is accomplished by exposing the media to phosphinimines and sequestering .sup.99 Tc from the media by the phosphinimine (PN) functionalities. The system for treating the liquid waste in the media includes extraction of .sup.99 TcO.sub.4.sup.- from aqueous solutions into organic solvents or mixed organic/polar media, extraction of .sup.99 Tc from solutions on a solid matrix by using a container containing PN functionalities on solid matrices including an inlet and outlet for allowing flow of media through an immobilized phosphinimine ligand system contained within the container. Also, insoluble suspensions of phosphinimine functionalities on solid matrices in liquid solutions or present on supported liquid membranes (SLM) can be used to sequester .sup.99 Tc from those liquids.

Katti, Kattesh V. (Columbia, MO); Volkert, Wynn A. (Columbia, MO); Singh, Prahlad (Columbia, MO); Ketring, Alan R. (Columbia, MO)

1995-01-01T23:59:59.000Z

340

Tomographic reconstruction of tokamak plasma light emission from single image using wavelet-vaguelette decomposition  

E-Print Network [OSTI]

ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 52 (2012) 013005 (11pp) doi:10 based on the wavelet-vaguelette decomposition. After validation of the new method using an academic test confinement, but the associated vessel erosion also impairs the awaited viability of long lasting discharges

Schneider, Kai

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Emergency cooling system and method  

DOE Patents [OSTI]

An improved emergency cooling system and method are disclosed that may be adapted for incorporation into or use with a nuclear BWR wherein a reactor pressure vessel (RPV) containing a nuclear core and a heat transfer fluid for circulation in a heat transfer relationship with the core is housed within an annular sealed drywell and is fluid communicable therewith for passage thereto in an emergency situation the heat transfer fluid in a gaseous phase and any noncondensibles present in the RPV, an annular sealed wetwell houses the drywell, and a pressure suppression pool of liquid is disposed in the wetwell and is connected to the drywell by submerged vents. The improved emergency cooling system and method has a containment condenser for receiving condensible heat transfer fluid in a gaseous phase and noncondensibles for condensing at least a portion of the heat transfer fluid. The containment condenser has an inlet in fluid communication with the drywell for receiving heat transfer fluid and noncondensibles, a first outlet in fluid communication with the RPV for the return to the RPV of the condensed portion of the heat transfer fluid and a second outlet in fluid communication with the drywell for passage of the noncondensed balance of the heat transfer fluid and the noncondensibles. The noncondensed balance of the heat transfer fluid and the noncondensibles passed to the drywell from the containment condenser are mixed with the heat transfer fluid and the noncondensibles from the RPV for passage into the containment condenser. A water pool is provided in heat transfer relationship with the containment condenser and is thermally communicable in an emergency situation with an environment outside of the drywell and the wetwell for conducting heat transferred from the containment condenser away from the wetwell and the drywell. 5 figs.

Oosterkamp, W.J.; Cheung, Y.K.

1994-01-04T23:59:59.000Z

342

Fast Quantum Methods for Optimization  

E-Print Network [OSTI]

Discrete combinatorial optimization consists in finding the optimal configuration that minimizes a given discrete objective function. An interpretation of such a function as the energy of a classical system allows us to reduce the optimization problem into the preparation of a low-temperature thermal state of the system. Motivated by the quantum annealing method, we present three strategies to prepare the low-temperature state that exploit quantum mechanics in remarkable ways. We focus on implementations without uncontrolled errors induced by the environment. This allows us to rigorously prove a quantum advantage. The first strategy uses a classical-to-quantum mapping, where the equilibrium properties of a classical system in $d$ spatial dimensions can be determined from the ground state properties of a quantum system also in $d$ spatial dimensions. We show how such a ground state can be prepared by means of quantum annealing, including quantum adiabatic evolutions. This mapping also allows us to unveil some fundamental relations between simulated and quantum annealing. The second strategy builds upon the first one and introduces a technique called spectral gap amplification to reduce the time required to prepare the same quantum state adiabatically. If implemented on a quantum device that exploits quantum coherence, this strategy leads to a quadratic improvement in complexity over the well-known bound of the classical simulated annealing method. The third strategy is not purely adiabatic; instead, it exploits diabatic processes between the low-energy states of the corresponding quantum system. For some problems it results in an exponential speedup (in the oracle model) over the best classical algorithms.

Sergio Boixo; Gerardo Ortiz; Rolando Somma

2014-09-08T23:59:59.000Z

343

Wireless sensor systems and methods, and methods of monitoring structures  

DOE Patents [OSTI]

A wireless sensor system includes a passive sensor apparatus configured to be embedded within a concrete structure to monitor infiltration of contaminants into the structure. The sensor apparatus includes charging circuitry and a plurality of sensors respectively configured to measure environmental parameters of the structure which include information related to the infiltration of contaminants into the structure. A reader apparatus is communicatively coupled to the sensor apparatus, the reader apparatus being configured to provide power to the charging circuitry during measurements of the environmental parameters by the sensors. The reader apparatus is configured to independently interrogate individual ones of the sensors to obtain information measured by the individual sensors. The reader apparatus is configured to generate an induction field to energize the sensor apparatus. Information measured by the sensor apparatus is transmitted to the reader apparatus via a response signal that is superimposed on a return induction field generated by the sensor apparatus. Methods of monitoring structural integrity of the structure are also provided.

Kunerth, Dennis C.; Svoboda, John M.; Johnson, James T.; Harding, L. Dean; Klingler, Kerry M.

2007-02-20T23:59:59.000Z

344

Radiochemistry methods in DOE methods for evaluating environmental and waste management samples  

SciTech Connect (OSTI)

Current standard sources of radiochemistry methods are often inappropriate for use in evaluating US Department of Energy environmental and waste management (DOE/EW) samples. Examples of current sources include EPA, ASTM, Standard Methods for the Examination of Water and Wastewater and HASL-300. Applicability of these methods is limited to specific matrices (usually water), radiation levels (usually environmental levels), and analytes (limited number). Radiochemistry methods in DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) attempt to fill the applicability gap that exists between standard methods and those needed for DOE/EM activities. The Radiochemistry chapter in DOE Methods includes an ``analysis and reporting`` guidance section as well as radiochemistry methods. A basis for identifying the DOE/EM radiochemistry needs is discussed. Within this needs framework, the applicability of standard methods and targeted new methods is identified. Sources of new methods (consolidated methods from DOE laboratories and submissions from individuals) and the methods review process will be discussed. The processes involved in generating consolidated methods add editing individually submitted methods will be compared. DOE Methods is a living document and continues to expand by adding various kinds of methods. Radiochemistry methods are highlighted in this paper. DOE Methods is intended to be a resource for methods applicable to DOE/EM problems. Although it is intended to support DOE, the guidance and methods are not necessarily exclusive to DOE. The document is available at no cost through the Laboratory Management Division of DOE, Office of Technology Development.

Fadeff, S.K.; Goheen, S.C.

1994-08-01T23:59:59.000Z

345

Vehicle security apparatus and method  

DOE Patents [OSTI]

A vehicle security apparatus for use in a motor vehicle, the apparatus comprising an optical key, a receptacle, a receiver and at least one optical fiber. The optical key has a transmitter having at least one first preprogrammed coded signal stored in a first electric circuit. The receptacle receives the optical key and at least one transmittable coded optical signal from the transmitter corresponding to the at least one preprogrammed coded signal stored in the first electric circuit. The receiver compares the at least one transmittable coded optical signal to at least one second preprogrammed coded signal stored in a second electric circuit and the receiver is adapted to trigger switching effects for at least one of enabling starting the motor vehicle and starting the motor vehicle upon determination that the at least one transmittable coded optical signal corresponds to the at least one second preprogrammed signal in the second electric circuit. The at least one optical fiber is operatively connected between the receptacle and the receiver for carrying the optical signal from the receptacle to the receiver. Also disclosed is a method for permitting only authorized use of a motor vehicle.

Veligdan, James T. (Manorville, NY)

1996-02-13T23:59:59.000Z

346

Vehicle security apparatus and method  

DOE Patents [OSTI]

A vehicle security apparatus for use in a motor vehicle is disclosed, the apparatus comprising an optical key, a receptacle, a receiver and at least one optical fiber. The optical key has a transmitter having at least one first preprogrammed coded signal stored in a first electric circuit. The receptacle receives the optical key and at least one transmittable coded optical signal from the transmitter corresponding to the at least one preprogrammed coded signal stored in the first electric circuit. The receiver compares the at least one transmittable coded optical signal to at least one second preprogrammed coded signal stored in a second electric circuit and the receiver is adapted to trigger switching effects for at least one of enabling starting the motor vehicle and starting the motor vehicle upon determination that the at least one transmittable coded optical signal corresponds to the at least one second preprogrammed signal in the second electric circuit. The at least one optical fiber is operatively connected between the receptacle and the receiver for carrying the optical signal from the receptacle to the receiver. Also disclosed is a method for permitting only authorized use of a motor vehicle. 7 figs.

Veligdan, J.T.

1996-02-13T23:59:59.000Z

347

Master-slave micromanipulator method  

DOE Patents [OSTI]

A method based on precision X-Y stages that are stacked. Attached to arms projecting from each X-Y stage are a set of two axis gimbals. Attached to the gimbals is a rod, which provides motion along the axis of the rod and rotation around its axis. A dual-planar apparatus that provides six degrees of freedom of motion precise to within microns of motion. Precision linear stages along with precision linear motors, encoders, and controls provide a robotics system. The motors can be remotized by incorporating a set of bellows on the motors and can be connected through a computer controller that will allow one to be a master and the other one to be a slave. Position information from the master can be used to control the slave. Forces of interaction of the slave with its environment can be reflected back to the motor control of the master to provide a sense of force sensed by the slave. Forces import onto the master by the operator can be fed back into the control of the slave to reduce the forces required to move it.

Morimoto, Alan K. (Albuquerque, NM); Kozlowski, David M. (Albuquerque, NM); Charles, Steven T. (Germantown, TN); Spalding, James A. (Springfield, KY)

1999-01-01T23:59:59.000Z

348

Infrared emitting device and method  

DOE Patents [OSTI]

The infrared emitting device comprises a III-V compound semiconductor substrate upon which are grown a quantum-well active region having a plurality of quantum-well layers formed of a ternary alloy comprising InAsSb sandwiched between barrier layers formed of a ternary alloy having a smaller lattice constant and a larger energy bandgap than the quantum-well layers. The quantum-well layers are preferably compressively strained to increase the threshold energy for Auger recombination; and a method is provided for determining the preferred thickness for the quantum-well layers. Embodiments of the present invention are described having at least one cladding layer to increase the optical and carrier confinement in the active region, and to provide for waveguiding of the light generated within the active region. Examples have been set forth showing embodiments of the present invention as surface- and edge-emitting light emitting diodes (LEDs), an optically-pumped semiconductor laser, and an electrically-injected semiconductor diode laser. The light emission from each of the infrared emitting devices of the present invention is in the midwave infrared region of the spectrum from about 2 to 6 microns. 8 figs.

Kurtz, S.R.; Biefeld, R.M.; Dawson, L.R.; Howard, A.J.; Baucom, K.C.

1997-04-29T23:59:59.000Z

349

DNA-based methods of geochemical prospecting  

DOE Patents [OSTI]

The present invention relates to methods for performing surveys of the genetic diversity of a population. The invention also relates to methods for performing genetic analyses of a population. The invention further relates to methods for the creation of databases comprising the survey information and the databases created by these methods. The invention also relates to methods for analyzing the information to correlate the presence of nucleic acid markers with desired parameters in a sample. These methods have application in the fields of geochemical exploration, agriculture, bioremediation, environmental analysis, clinical microbiology, forensic science and medicine.

Ashby, Matthew (Mill Valley, CA)

2011-12-06T23:59:59.000Z

350

Spectral shift reactor control method  

SciTech Connect (OSTI)

This patent describes the method of operating a pressurized-water fissile-material-fueled spectral-shift nuclear reactor in such manner that short-term reactivity requirement variations can be satisfied without making control rod or chemical shim changes. The reactor includes a pressure vessel enclosing a reactor core and having an inlet and an outlet for circulating a water coolant moderator in heat transfer relationship with the core. The core comprises fuel assemblies disposed therein for generating heat by nuclear fission. The reactor provided with neutron-absorbing control rods which are vertically movable into and out of the core so that movement of the control rods into the core will substantially decrease reactivity and withdrawal of the control rods from the core will substantially increase reactivity. The control rods when inserted into the core displace an equivalent volume of the water coolant moderator. The reactor also provides neutron-spectral-shift rods which have a lower absorptivity for neutrons than the control rods, the neutron-spectral shift rods when inserted into the core displacing an equaivalent volume of the water coolant moderator. The neutron-spectral-shift rods comprises two different types of rods, a first of the different types of the neutron-spectral-shift rods comprising displacer rods which have a low absorptivity for neutrons, the remainder of the neutron-spectral-shift rods comprising gray rods which have an absorption for neutrons which is intermediate the neutron absorption of the control rods and the low neutron absorption of the displacer rods. Each neutron-spectral-shift displacer rod comprises a hollow thin-walled Zircaloy member containing a filling of solid or annular zirconium- or aluminum-containing material for providing internal support and mass for the thin-walled tubular member.

Impink, A.J. Jr.

1987-12-29T23:59:59.000Z

351

Thermochemical nanolithography components, systems, and methods  

DOE Patents [OSTI]

Improved nanolithography components, systems, and methods are described herein. The systems and methods generally employ a resistively heated atomic force microscope tip to thermally induce a chemical change in a surface. In addition, certain polymeric compositions are also disclosed.

Riedo, Elisa; Marder, Seth R.; de Heer, Walt A.; Szoskiewicz, Robert J.; Kodali, Vamsi K.; Jones, Simon C.; Okada, Takashi; Wang, Debin; Curtis, Jennifer E.; Henderson, Clifford L.; Hua, Yueming

2013-06-18T23:59:59.000Z

352

Methods and compositions using calcium carbonate  

DOE Patents [OSTI]

Provided herein are compositions and methods including hydraulic cement, supplementary cementitious material, and/or self-cementing material. Methods for making the compositions and using the compositions are provided.

Constantz, Brent R. (Portola Valley, CA); Farsad, Kasra (San Jose, CA); Camire, Chris (San Jose, CA); Patterson, Joshua (Freedom, CA); Ginder-Vogel, Matthew (Los Gatos, CA); Yaccato, Karin (San Jose, CA); Stagnaro, John (Santa Clara, CA); Devenney, Martin (Mountain View, CA); Ries, Justin (Chapel Hill, NC)

2012-03-20T23:59:59.000Z

353

Methods and compositions using calcium carbonate  

DOE Patents [OSTI]

Provided herein are compositions and methods including hydraulic cement, supplementary cementitious material, and/or self-cementing material. Methods for making the compositions and using the compositions are provided.

Constantz, Brent R. (Portola Valley, CA); Farsad, Kasra (San Jose, CA); Camire, Chris (San Jose, CA); Patterson, Joshua (Freedom, CA); Ginder-Vogel, Matthew (Los Gatos, CA); Yaccato, Karin (San Jose, CA); Stagnaro, John (Santa Clara, CA); Devenney, Martin (Mountain View, CA); Ries, Justin (Chapel Hill, NC)

2011-11-22T23:59:59.000Z

354

Methods and compositions using calcium carbonate  

DOE Patents [OSTI]

Provided herein are compositions and methods including hydraulic cement, supplementary cementitious material, and/or self-cementing material. Methods for making the compositions and using the compositions are provided.

Constantz, Brent R. (Portola Valley, CA); Farsad, Kasra (San Jose, CA); Camire, Chris (San Jose, CA); Chen, Irvin (San Jose, CA)

2011-04-12T23:59:59.000Z

355

Methods and compositions using calcium carbonate  

DOE Patents [OSTI]

Provided herein are compositions and methods including hydraulic cement, supplementary cementitious material, and/or self-cementing material. Methods for making the compositions and using the compositions are provided.

Constantz, Brent R. (Portola Valley, CA); Farsad, Kasra (San Jose, CA); Camire, Chris (San Jose, CA); Patterson, Joshua (Freedom, CA); Fernandez, Miguel (San Jose, CA); Yaccato, Karin (San Jose, CA); Thatcher, Ryan (Sunnyvale, CA); Stagnaro, John (Santa Clara, CA); Chen, Irvin (Santa Clara, CA); Omelon, Sidney (Willowdale, CA); Hodson, Keith (Palo Alto, CA); Clodic, Laurence (Sunnyvale, CA); Geramita, Katharine (Seattle, CA); Holland, Terence C. (Auburn Township, OH); Ries, Justin (Chapel Hill, NC)

2012-02-14T23:59:59.000Z

356

Methods and compositions using calcium carbonate  

DOE Patents [OSTI]

Provided herein are compositions and methods including hydraulic cement, supplementary cementitious material, and/or self-cementing material. Methods for making the compositions and using the compositions are provided.

Constantz, Brent R. (Portola Valley, CA); Farsad, Kasra (San Jose, CA); Camire, Chris (San Jose, CA); Chen, Irvin (Santa Clara, CA); Ginder-Vogel, Matthew (Los Gatos, CA); Fernandez, Miguel (San Jose, CA)

2012-05-15T23:59:59.000Z

357

Method of Forming Diamonds from Carbonaceous Material  

SciTech Connect (OSTI)

A method for producing diamonds is provided comprising exposing carbonaceous material to ion irradiation at ambient temperature and pressure.

Daulton, Tyrone; Lewis, Roy; Rehn, Lynn; Kirk, Marquis

1999-11-30T23:59:59.000Z

358

Optimization Online - Composite Proximal Bundle Method  

E-Print Network [OSTI]

Jul 30, 2009 ... Composite Proximal Bundle Method. Claudia Sagastizabal (sagastiz ***at*** impa.br). Abstract: We consider minimization of nonsmooth ...

Claudia Sagastizabal

2009-07-30T23:59:59.000Z

359

AN INTERIOR POINT METHOD FOR MATHEMATICAL PROGRAMS ...  

E-Print Network [OSTI]

Abstract. Interior point methods for nonlinear programs (NLP) are adapted for solution of mathematical programs with complementarity constraints (MPCCs).

360

Accurate conjugate gradient methods for shifted systems  

E-Print Network [OSTI]

Accurate conjugate gradient methods for shifted systems by Jasper van den Eshof and Gerard L. G CONJUGATE GRADIENT METHODS FOR SHIFTED SYSTEMS JASPER VAN DEN ESHOF AND GERARD L. G. SLEIJPEN Abstract We present an efficient and accurate variant of the conjugate gradient method for solving families of shifted

Sleijpen, Gerard

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Accurate conjugate gradient methods for shifted systems  

E-Print Network [OSTI]

Accurate conjugate gradient methods for shifted systems by Jasper van den Eshof and Gerard L. G CONJUGATE GRADIENT METHODS FOR SHIFTED SYSTEMS JASPER VAN DEN ESHOF # AND GERARD L. G. SLEIJPEN # Abstract We present an e#cient and accurate variant of the conjugate gradient method for solving families

Sleijpen, Gerard

362

Signal Subspace Methods for Speech Enhancement  

E-Print Network [OSTI]

Signal Subspace Methods for Speech Enhancement Ph.D. Thesis Peter S. K. Hansen LYNGBY 1997 IMM Lyngby -- Denmark 1997­09­30 pskh Signal Subspace Methods for Speech Enhancement Ph.D. Thesis Peter S. K is Signal Subspace Methods for Speech Enhancement where techniques from the areas of signal processing

363

Composite materials and method of making  

DOE Patents [OSTI]

A method for forming improved composite materials using a thermosetting polyester urethane hybrid resin, a closed cavity mold having an internal heat transfer mechanism used in this method, and the composite materials formed by this method having a hybrid of a carbon fiber layer and a fiberglass layer.

Simmons, Kevin L [Kennewick, WA; Wood, Geoffrey M [North Saanich, CA

2011-05-17T23:59:59.000Z

364

Compositions and methods for treating nuclear fuel  

DOE Patents [OSTI]

Compositions are provided that include nuclear fuel. Methods for treating nuclear fuel are provided which can include exposing the fuel to a carbonate-peroxide solution. Methods can also include exposing the fuel to an ammonium solution. Methods for acquiring molybdenum from a uranium comprising material are provided.

Soderquist, Chuck Z; Johnsen, Amanda M; McNamara, Bruce K; Hanson, Brady D; Smith, Steven C; Peper, Shane M

2013-08-13T23:59:59.000Z

365

Compositions and methods for treating nuclear fuel  

DOE Patents [OSTI]

Compositions are provided that include nuclear fuel. Methods for treating nuclear fuel are provided which can include exposing the fuel to a carbonate-peroxide solution. Methods can also include exposing the fuel to an ammonium solution. Methods for acquiring molybdenum from a uranium comprising material are provided.

Soderquist, Chuck Z; Johnsen, Amanda M; McNamara, Bruce K; Hanson, Brady D; Smith, Steven C; Peper, Shane M

2014-01-28T23:59:59.000Z

366

Nano-ceramics and method thereof  

DOE Patents [OSTI]

Disclosed herein is a method to produce ceramic materials utilizing the sol-gel process. The methods enable the preparation of intimate homogeneous dispersions of materials while offering the ability to control the size of one component within another. The method also enables the preparation of materials that will densify at reduced temperature.

Satcher, Jr., Joe H. (Patterson, CA); Gash, Alex (Livermore, CA); Simpson, Randall (Livermore, CA); Landingham, Richard (Livermore, CA); Reibold, Robert A. (Salida, CA)

2006-08-08T23:59:59.000Z

367

Formal Methods in Industry: The State of Practice of Formal Methods in South America  

E-Print Network [OSTI]

Formal Methods in Industry: The State of Practice of Formal Methods in South America and Far East of the world, mainly South America, and Far East. A personal comparison of some formal method tools, namely

Southampton, University of

368

Some methods of estimating uncertainty in accident reconstruction  

E-Print Network [OSTI]

In the paper four methods for estimating uncertainty in accident reconstruction are discussed: total differential method, extreme values method, Gauss statistical method, and Monte Carlo simulation method. The methods are described and the program solutions are given.

Milan Batista

2011-07-20T23:59:59.000Z

369

Assessment of seismic margin calculation methods  

SciTech Connect (OSTI)

Seismic margin review of nuclear power plants requires that the High Confidence of Low Probability of Failure (HCLPF) capacity be calculated for certain components. The candidate methods for calculating the HCLPF capacity as recommended by the Expert Panel on Quantification of Seismic Margins are the Conservative Deterministic Failure Margin (CDFM) method and the Fragility Analysis (FA) method. The present study evaluated these two methods using some representative components in order to provide further guidance in conducting seismic margin reviews. It is concluded that either of the two methods could be used for calculating HCLPF capacities. 21 refs., 9 figs., 6 tabs.

Kennedy, R.P.; Murray, R.C.; Ravindra, M.K.; Reed, J.W.; Stevenson, J.D.

1989-03-01T23:59:59.000Z

370

Method for processing silicon solar cells  

DOE Patents [OSTI]

The instant invention teaches a novel method for fabricating silicon solar cells utilizing concentrated solar radiation. The solar radiation is concentrated by use of a solar furnace which is used to form a front surface junction and back-surface field in one processing step. The present invention also provides a method of making multicrystalline silicon from amorphous silicon. The invention also teaches a method of texturing the surface of a wafer by forming a porous silicon layer on the surface of a silicon substrate and a method of gettering impurities. Also contemplated by the invention are methods of surface passivation, forming novel solar cell structures, and hydrogen passivation. 2 figs.

Tsuo, Y.S.; Landry, M.D.; Pitts, J.R.

1997-05-06T23:59:59.000Z

371

Method for processing silicon solar cells  

DOE Patents [OSTI]

The instant invention teaches a novel method for fabricating silicon solar cells utilizing concentrated solar radiation. The solar radiation is concentrated by use of a solar furnace which is used to form a front surface junction and back-surface field in one processing step. The present invention also provides a method of making multicrystallline silicon from amorphous silicon. The invention also teaches a method of texturing the surface of a wafer by forming a porous silicon layer on the surface of a silicon substrate and a method of gettering impurities. Also contemplated by the invention are methods of surface passivation, forming novel solar cell structures, and hydrogen passivation.

Tsuo, Y. Simon (Golden, CO); Landry, Marc D. (Lafayette, CO); Pitts, John R. (Lakewood, CO)

1997-01-01T23:59:59.000Z

372

INSTITUTE OF PHYSICS PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 44 (2004) 645654 PII: S0029-5515(04)78446-X  

E-Print Network [OSTI]

44 (2004) 645­654 PII: S0029-5515(04)78446-X Effects of Ohmic current in the TJ-II stellarator D. L

Martín-Solís, José Ramón

373

INSTITUTE OF PHYSICS PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 43 (2003) 16321640 PII: S0029-5515(03)69604-3  

E-Print Network [OSTI]

43 (2003) 1632­1640 PII: S0029-5515(03)69604-3 Overview of the FTU results B. Angelini, M.L. Apicella

Vlad, Gregorio

374

INSTITUTE OF PHYSICS PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 43 (2003) 13841395 PII: S0029-5515(03)70264-6  

E-Print Network [OSTI]

43 (2003) 1384­1395 PII: S0029-5515(03)70264-6 Transport studies with the ECH system on FTU tokamak S

Vlad, Gregorio

375

INSTITUTE OF PHYSICS PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 43 (2003) 982988 PII: S0029-5515(03)66862-6  

E-Print Network [OSTI]

43 (2003) 982­988 PII: S0029-5515(03)66862-6 Predictive study of high performance scenarios in HL-2A

Budny, Robert

376

IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 49 (2009) 104018 (10pp) doi:10.1088/0029-5515/49/10/104018  

E-Print Network [OSTI]

-II stellarator. The inherently strong plasma­ wall interaction of TJ-II has been successfully reduced after lithium coating by vacuum evaporation. Besides H retention and low Z, Li was chosen because there exists properties. The Li-coating has led to important changes in plasma performance. Particularly, the effective

Martín-Solís, José Ramón

2009-01-01T23:59:59.000Z

377

INSTITUTE OF PHYSICS PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 47 (2007) 181188 doi:10.1088/0029-5515/47/3/003  

E-Print Network [OSTI]

. In previous spheromak experiments, electron density of the order 1019­21 m-3 had been measured in the flux. Introduction Magnetized coaxial plasma guns are often used to produce plasmas in spheromak formation along the gun axis by MHD forces and ejected from the muzzle, producing a plasma plume. In spheromak

Bellan, Paul M.

378

IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 47 (2007) 14491457 doi:10.1088/0029-5515/47/11/006  

E-Print Network [OSTI]

-D; and electron heat diffusivities in non-tokamak experiments (NSTX/ST, MST/RFP, SSPX/spheromak). The radial

Callen, James D.

379

and INTERNATIONAL ATOMIC ENERGY AGENCYIOP PUBLISHING NUCLEAR FUSION Nucl. Fusion 48 (2008) 032001 (5pp) doi:10.1088/0029-5515/48/3/032001  

E-Print Network [OSTI]

reversed configuration from a spheromak S.P. Gerhardt1 , E.V. Belova1 , M. Yamada1 , H. Ji1 , M. Inomoto2 reversed configuration is demonstrated, based on the inductively driven transformation of a spheromak; simulations indicate that stability through the transition is explained by magnetic diffusion. Spheromaks

Ji, Hantao

380

arXiv:0910.2940v1[nucl-th]15Oct2009 Structure of even-even nuclei using a mapped collective  

E-Print Network [OSTI]

structure, in the sense that it is well-founded in its methodology and is applicable across the chart of nuclides. The most promising starting point is self-consistent mean-field, but the theory must be extended

Washington at Seattle, University of - Department of Physics, Electroweak Interaction Research Group

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 50 (2010) 014005 (5pp) doi:10.1088/0029-5515/50/1/014005  

E-Print Network [OSTI]

with international collaboration towards the early use of fusion energy to meet the urgent needs for energy of three as shown in figure 2. Meanwhile, China's resources are poorly balanced. It uses 11% of world coal, 13% hydropower, but only 2.5% of the oil and 1.2% of the gas on the Earth. This means

382

IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 47 (2007) S727S734 doi:10.1088/0029-5515/47/10/S20  

E-Print Network [OSTI]

and damaging of plasma facing materials, while the second one poses soft limits in the operation space. In the framework of plasma theory, meanwhile, the first issue is connected with the identification of burning. This subject is a clear example of the successful and positive feedback between theory and experiment

Zonca, Fulvio

2007-01-01T23:59:59.000Z

383

arXiv:0907.2721v3[nucl-ex]22Sep2009 Neutral Pion Production in Au+Au Collisions at  

E-Print Network [OSTI]

. I. Abelev,8 M. M. Aggarwal,30 Z. Ahammed,47 A. V. Alakhverdyants,17 B. D. Anderson,18 D. Arkhipkin,3

Llope, William J.

384

arXiv:0812.1063v2[nucl-ex]2Mar2009 Observation of Two-source Interference in the Photoproduction Reaction  

E-Print Network [OSTI]

Reaction AuAu AuAu0 B. I. Abelev,9 M. M. Aggarwal,31 Z. Ahammed,47 B. D. Anderson,19 D. Arkhipkin,13 G. S

Llope, William J.

385

arXiv:0807.3269v1[nucl-ex]21Jul2008 Beam-Energy and System-Size Dependence of Dynamical Net Charge Fluctuations  

E-Print Network [OSTI]

Fluctuations B. I. Abelev,1 M. M. Aggarwal,2 Z. Ahammed,3 B. D. Anderson,4 D. Arkhipkin,5 G. S. Averichev,6 Y

Llope, William J.

386

arXiv:0903.1296v2[nucl-ex]4Aug2009 Pion Interferometry in Au+Au and Cu+Cu Collisions at  

E-Print Network [OSTI]

.4 and 200 GeV B. I. Abelev,8 M. M. Aggarwal,30 Z. Ahammed,47 B. D. Anderson,18 D. Arkhipkin,12 G. S

Llope, William J.

387

IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 50 (2010) 014003 (8pp) doi:10.1088/0029-5515/50/1/014003  

E-Print Network [OSTI]

the development of a thermonuclear reactor. Following this, experimental research on plasma initiation and heating participating at that time in the development of thermonuclear weapons at the then secret Arzamas-16 nuclear and performed the first estimations of a possible thermonuclear reactor with magnetic confinement of plasma

388

arXiv:nucl-th/0412037v110Dec2004 Transport Theories for Heavy Ion Collisions in the 1 AGeV  

E-Print Network [OSTI]

. Danielewicz8 , C. Fuchs9 , T. Gaitanos10 , C.M. Ko6 , A. Larionov5 , M. Reiter4 , Gy. Wolf11 , J. Aichelin2 1

Heger, Alexander

389

Eur J Nucl Med Mol Imaging. Author manuscript Non-invasive estimation of hepatic blood perfusion from H2 15O PET  

E-Print Network [OSTI]

perfusion from H2 15O PET images using tissue-derived arterial and portal input functions Kudomi Nobuyuki 1 Timo 2 , Knuuti Juhani 1 , Iida Hirokazu 3 , Nuutila Pirjo 1 4 , Iozzo Patricia 1 5 Turku PET Centre1 artery. When its perfusion is assessed using PET and O-labeled water15 (H O), calculations require a dual

Paris-Sud XI, Université de

390

| International Atomic Energy Agency Nuclear Fusion Nucl. Fusion 54 (2014) 033008 (8pp) doi:10.1088/0029-5515/54/3/033008  

E-Print Network [OSTI]

localized modes (ELMs) or plasma disruptions [1, 2], the high thermal energy can be deposited on localized areas of plasma- facing components (PFC) in fusion devices [3, 4]. Among high-Z materials, pure tungsten (W) demonstrates the highest resistance against thermal loads under plasma disruption conditions

Harilal, S. S.

391

INSTITUTE OF PHYSICS PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 46 (2006) 477486 doi:10.1088/0029-5515/46/4/008  

E-Print Network [OSTI]

, The Australian National University, Canberra 2600, Australia Received 9 November 2005, accepted for publication 1, Australia 2 Department of Theoretical Physics, Research School of Physical Sciences and Engineering

Dewar, Robert L.

2006-01-01T23:59:59.000Z

392

IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 49 (2009) 075034 (7pp) doi:10.1088/0029-5515/49/7/075034  

E-Print Network [OSTI]

) powers should provide a strong contribution to burning plasma research. The interaction of trapped alpha by supra-thermal electrons generated by lower hybrid current drive is an important issue of burning plasma research. Indeed, the trapped particle averaged bounce characterizing the interaction of trapped alpha

Zonca, Fulvio

393

1 arXiv:nucl-th/0305016v1 7 May 2003Non-Scissors-Mode Behaviour of Isovector Magnetic Dipole Orbital Transitions Involving Isospin Transfer  

E-Print Network [OSTI]

We study the response of isovector orbital magnetic dipole (IOMD) transitions to the quadrupole-quadrupole (Q · Q) interaction, to the isospinconserving pairing interaction (ICP) and to combinations of both. We find qualitatively different behaviours for transitions in which the final isospin differs from the initial isospin versus cases where the two isospins are the same. For N = Z even-even nuclei with J ? = 0 +, T = 0 ground states such as 8Be and 20Ne, the summed T = 0 ? T = 1 IOMD from the ground state to all the J = 1, T = 1 states in the 0Żh? space does not vanish when the Q · Q interaction is turned off. The pairing interaction (ICP) alone leads to a finite transition rate. For nuclei with J = 0 +, T = 1 ground states such 2 as 10Be and 22Ne, the summed T = 1 ? T = 1 IOMD does vanish when the Q · Q interaction is turned off, as is expected in a good scissors-mode behaviour. However this is not the case for the corresponding sum of the T = 1 ? T = 2 IOMD transitions. In 22Ne (but not in 10Be) the sum of the T = 1 ? T = 2 IOMD transitions is remarkably insensitive to the strengths of both the Q · Q and the ICP interactions. In 22Ne an energy weighted-sum is similarly insensitive. All our calculations were carried out in the 0Żh? space. I.

S. Aroua; L. Zamick; Y. Y. Sharon; E. Moya De Guerra; M. S. Fayache; P. Sarriguren

2008-01-01T23:59:59.000Z

394

INSTITUTE OF PHYSICS PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 44 (2004) S254S265 PII: S0029-5515(04)88685-X  

E-Print Network [OSTI]

2 Los Alamos National Laboratory, PO Box 1663, Los Alamos, New Mexico 87545, USA 3 Sandia National Laboratories, PO Box 5800, Albuquerque, New Mexico 87185, USA 4 University of California, San Diego, 9500 suggested a cost goal of about $0.25­0.30 for each injected target (corresponding to 10% of the `electricity

Tillack, Mark

395

Improved methods for high resolution electron microscopy  

SciTech Connect (OSTI)

Existing methods of making support films for high resolution transmission electron microscopy are investigated and novel methods are developed. Existing methods of fabricating fenestrated, metal reinforced specimen supports (microgrids) are evaluated for their potential to reduce beam induced movement of monolamellar crystals of C/sub 44/H/sub 90/ paraffin supported on thin carbon films. Improved methods of producing hydrophobic carbon films by vacuum evaporation, and improved methods of depositing well ordered monolamellar paraffin crystals on carbon films are developed. A novel technique for vacuum evaporation of metals is described which is used to reinforce microgrids. A technique is also developed to bond thin carbon films to microgrids with a polymer bonding agent. Unique biochemical methods are described to accomplish site specific covalent modification of membrane proteins. Protocols are given which covalently convert the carboxy terminus of papain cleaved bacteriorhodopsin to a free thiol. 53 refs., 19 figs., 1 tab.

Taylor, J.R.

1987-04-01T23:59:59.000Z

396

Radiochemistry methods in DOE Methods for Evaluating Environmental and Waste Management Samples: Addressing new challenges  

SciTech Connect (OSTI)

Radiochemistry methods in Department of Energy Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) add to the repertoire of other standard methods in support of U.S. Department of Energy environmental restoration and waste management (DOE/EM) radiochemical characterization activities. Current standard sources of radiochemistry methods are not always applicable for evaluating DOE/EM samples. Examples of current sources include those provided by the US Environmental Protection Agency, the American Society for Testing and Materials, Standard Methods for the Examination of Water and Wastewater, and Environmental Measurements Laboratory Procedures Manual (HASL-300). The applicability of these methods is generally limited to specific matrices (usually water), low-level radioactive samples, and a limited number of analytes. DOE Methods complements these current standard methods by addressing the complexities of EM characterization needs. The process for determining DOE/EM radiochemistry characterization needs is discussed. In this context of DOE/EM needs, the applicability of other sources of standard radiochemistry methods is defined, and gaps in methodology are identified. Current methods in DOE Methods and the EM characterization needs they address are discussed. Sources of new methods and the methods incorporation process are discussed. The means for individuals to participate in (1) identification of DOE/EM needs, (2) the methods incorporation process, and (3) submission of new methods are identified.

Fadeff, S.K.; Goheen, S.C.; Riley, R.G. [Pacific Northwest Lab., Richland, WA (United States)] [and others

1994-12-31T23:59:59.000Z

397

The HIT method: A hazard identification technique  

SciTech Connect (OSTI)

This report explains a technique for analyzing systems and operations to identify hazards and needed controls. The HIT method can be used both as a design tool and as a risk analysis tool. As a design tool, this method identifies requirements for design criteria. As part of a risk analysis effort, HIT identifies potential accident sequences that can become part of the safety analysis documentation. Within this report the HIT method is described in detail with emphasis on application of the technique.

Howard, H.H.; Faust, C.L.

1990-01-01T23:59:59.000Z

398

Hydrocarbonaceous material processing methods and apparatus  

DOE Patents [OSTI]

Methods and apparatus are disclosed for possibly producing pipeline-ready heavy oil from substantially non-pumpable oil feeds. The methods and apparatus may be designed to produce such pipeline-ready heavy oils in the production field. Such methods and apparatus may involve thermal soaking of liquid hydrocarbonaceous inputs in thermal environments (2) to generate, though chemical reaction, an increased distillate amount as compared with conventional boiling technologies.

Brecher, Lee E. (Laramie, WY)

2011-07-12T23:59:59.000Z

399

Methods for chromosome-specific staining  

DOE Patents [OSTI]

Methods and compositions for chromosome-specific staining are provided. Compositions comprise heterogeneous mixtures of labeled nucleic acid fragments having substantially complementary base sequences to unique sequence regions of the chromosomal DNA for which their associated staining reagent is specific. Methods include ways for making the chromosome-specific staining compositions of the invention, and methods for applying the staining compositions to chromosomes. 3 figs.

Gray, J.W.; Pinkel, D.

1995-09-05T23:59:59.000Z

400

Method and apparatus for measuring stress  

DOE Patents [OSTI]

A method and apparatus for determining stress in a material independent of micro-structural variations and anisotropies. The method comprises comparing the velocities of two horizontally polarized and horizontally propagating ultrasonic shear waves with interchanged directions of propagation and polarization. The apparatus for carrying out the method comprises periodic permanent magnet-electromagnetic acoustic transducers for generating and detecting the shear waves and means for determining the wave velocities.

Thompson, R.B.

1983-07-28T23:59:59.000Z

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Method and apparatus for measuring stress  

DOE Patents [OSTI]

A method and apparatus for determining stress in a material independent of micro-structural variations and anisotropies. The method comprises comparing the velocities of two horizontally polarized and horizontally propagating ultrasonic shear waves with interchanged directions of propagation and polarization. The apparatus for carrying out the method comprises periodic permanent magnet-electromagnetic acoustic transducers for generating and detecting the shear waves and means for determining the wave velocities.

Thompson, R. Bruce (Ames, IA)

1985-06-11T23:59:59.000Z

402

Method for making boron carbide cermets  

DOE Patents [OSTI]

A method for synthesizing low density cermets of boron carbide and a metal binder, using decomposition of a metallic compound at controlled temperature and pressure is disclosed.

Cline, C.F.; Fulton, F.J.

1987-11-03T23:59:59.000Z

403

Superconducting materials and method of making same  

DOE Patents [OSTI]

A new chemical method and apparatus for preparing precursor powders for metal oxide superconductor ceramics are described. Superconductors, free of contaminating cations, are thus obtained. 10 figs.

Bunker, B.C.; Lamppa, D.L.; Voigt, J.A.

1988-02-25T23:59:59.000Z

404

The two cutoff phase space slicing method  

E-Print Network [OSTI]

The phase space slicing method of two cutoffs for next-to-leading-order Monte-Carlo style QCD corrections has been applied to many physics processes. The method is intuitive, simple to implement, and relies on a minimum of process dependent information. Although results for specific applications exist in the literature, there is not a full and detailed description of the method. Herein such a description is provided, along with illustrative examples; details, which have not previously been published, are included so that the method may be applied to additional hard scattering processes.

B. W. Harris; J. F. Owens

2001-02-10T23:59:59.000Z

405

Supercapacitor compositions, devices and related methods  

SciTech Connect (OSTI)

Disclosed are supercapacitor materials comprising compositions having pores that are optimally sized to maximize capacitance. Also disclosed are related methods for fabricating such supercapacitors.

Gogotsi, Yury; Simon, Patrice; Largeot, Celine; Portet, Cristelle; Chmiola, John; Taberna, Pierre-Louis

2013-07-30T23:59:59.000Z

406

Method of altering lignin in trees  

DOE Patents [OSTI]

Methods of providing and breeding trees having more easily extractable lignin due to the presence of a cinnamyl alcohol dehydrogenase (Cad) null gene are presented. 16 figs.

MacKay, J.; O`Malley, D.; Whetten, R.; Sederoff, R.

1998-10-20T23:59:59.000Z

407

Variational Iteration Method for Image Restoration  

E-Print Network [OSTI]

The famous Perona-Malik (P-M) equation which was at first introduced for image restoration has been solved via various numerical methods. In this paper we will solve it for the first time via applying a new numerical method called the Variational Iteration Method (VIM) and the correspondent approximated solutions will be obtained for the P-M equation with regards to relevant error analysis. Through implementation of our algorithm we will access some effective results which are deserved to be considered as worthy as the other solutions issued by the other methods.

Yahya, Keyvan; Azari, Hossein; Fard, Pouyan Rafiei

2010-01-01T23:59:59.000Z

408

A Parallel Inertial Proximal Optimization Method  

E-Print Network [OSTI]

The Douglas-Rachford algorithm is a popular iterative method for finding a zero of a ... algorithm, parallel proximal algorithms are proposed to minimize over a ...

2011-07-01T23:59:59.000Z

409

Carbon nanohoops and methods of making  

DOE Patents [OSTI]

The present invention provides cycloparaphenylene compounds, their macrocyclic precursors, and methods for making the compounds. The cycloparaphenylene compounds can be used to prepare armchair carbon nanotubes.

Jasti, Ramesh; Bertozzi, Carolyn

2013-06-11T23:59:59.000Z

410

Method for making boron carbide cermets  

DOE Patents [OSTI]

A method for synthesizing low density cermets of boron carbide and a metal binder, using decomposition of a metallic compound at controlled temperature and pressure.

Cline, Carl F. (Danville, CA); Fulton, Fred J. (Livermore, CA)

1987-01-01T23:59:59.000Z

411

Zein composition and methods of production  

DOE Patents [OSTI]

A high cysteine content zein composition is provided. A method and system for the manufacture of the bioproduct is likewise disclosed herein.

Lawton, Jr., John

2014-08-05T23:59:59.000Z

412

Methods for threshold determination in multiplexed assays  

DOE Patents [OSTI]

Methods for determination of threshold values of signatures comprised in an assay are described. Each signature enables detection of a target. The methods determine a probability density function of negative samples and a corresponding false positive rate curve. A false positive criterion is established and a threshold for that signature is determined as a point at which the false positive rate curve intersects the false positive criterion. A method for quantitative analysis and interpretation of assay results together with a method for determination of a desired limit of detection of a signature in an assay are also described.

Tammero, Lance F. Bentley; Dzenitis, John M; Hindson, Benjamin J

2014-06-24T23:59:59.000Z

413

Optimization Online - Splitting methods for nonconvex composite ...  

E-Print Network [OSTI]

Jul 2, 2014 ... Splitting methods for nonconvex composite optimization. Guoyin Li (g.li ***at*** unsw.edu.au) Ting Kei Pong (tkpong ***at*** cs.ubc.ca).

Guoyin Li

2014-07-02T23:59:59.000Z

414

Seismic Fracture Characterization Methods for Enhanced Geothermal...  

Broader source: Energy.gov (indexed) [DOE]

5 4.5.2 Seismic Fracture Characterization Methods for Enhanced Geothermal Systems Presentation Number: 022 Investigator: Queen, John (Hi-Q Geophysical Inc.) Objectives: To develop...

415

Seismic Fracture Characterization Methods for Enhanced Geothermal...  

Broader source: Energy.gov (indexed) [DOE]

Seismic Fracture Characterization Methods for Enhanced Geothermal Systems Principal Investigator: John H. Queen Hi-Q Geophysical Inc. Track Name: Seismicity and Reservoir Fracture...

416

Method of altering lignin in trees  

DOE Patents [OSTI]

Methods of providing and breeding trees having more easily extractable lignin due to the presence of a cinnamyl alcohol dehydrogenase (Cad) null gene are presented.

MacKay, John (Raleigh, NC); O'Malley, David (Cary, NC); Whetten, Ross (Raleigh, NC); Sederoff, Ronald (Raleigh, NC)

1998-01-01T23:59:59.000Z

417

Optimization Online - Accelerated Linearized Bregman Method  

E-Print Network [OSTI]

Jun 27, 2011 ... Abstract: In this paper, we propose and analyze an accelerated linearized Bregman (ALB) method for solving the basis pursuit and related ...

Bo Huang

2011-06-27T23:59:59.000Z

418

Method of controlling fusion reaction rates  

DOE Patents [OSTI]

This invention relates to a method of controlling the reaction rates in a nuclear fusion reactor; and more particularly, to the use of polarized nuclear fuel.

Kulsrud, R.M.; Furth, H.P.; Valeo, E.J.; Goldhaber, M.

1983-05-09T23:59:59.000Z

419

Coverage statistics for sequence census methods  

E-Print Network [OSTI]

Nature Methods 2008, 5:19-21. Hower V, Evans SN, Pachter L:N Evans 1,2 , Valerie Hower 1* , Lior Pachter 1,3 Abstract

Evans, Steven N; Hower, Valerie; Pachter, Lior

2010-01-01T23:59:59.000Z

420

Transport properties of multicomponent thermal plasmas: Grad method versus Chapman-Enskog method  

SciTech Connect (OSTI)

Transport properties (thermal conductivity, viscosity, and electrical conductivity) for multicomponent Ar-Fe thermal plasmas at atmospheric pressure have been determined by means of two different methods. The transport coefficients set based on Grad's method is compared with the data obtained when using the Chapman-Enskog's method. Results from both applied methods are in good agreement. It is shown that the Grad method is suitable for the determination of transport properties of the thermal plasmas.

Porytsky, P. [Institute for Nuclear Research, 03680 Kyiv (Ukraine); Krivtsun, I.; Demchenko, V. [Paton Welding Institute, 03680 Kyiv (Ukraine); Reisgen, U.; Mokrov, O.; Zabirov, A. [RWTH Aachen University, ISF-Welding and Joining Institute, 52062 Aachen (Germany); Gorchakov, S.; Timofeev, A.; Uhrlandt, D. [Leibniz Institute for Plasma Science and Technology (INP Greifswald), 17489 Greifswald (Germany)

2013-02-15T23:59:59.000Z

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Computational methods in wind power meteorology  

E-Print Network [OSTI]

Computational methods in wind power meteorology Bo Hoffmann Jørgensen, Søren Ott, Niels Nørmark, Jakob Mann and Jake Badger Title: Computational methods in wind power meteorology Department: Wind in connection with the project called Computational meth- ods in wind power meteorology which was supported

422

Fast neutron imaging device and method  

DOE Patents [OSTI]

A fast neutron imaging apparatus and method of constructing fast neutron radiography images, the apparatus including a neutron source and a detector that provides event-by-event acquisition of position and energy deposition, and optionally timing and pulse shape for each individual neutron event detected by the detector. The method for constructing fast neutron radiography images utilizes the apparatus of the invention.

Popov, Vladimir; Degtiarenko, Pavel; Musatov, Igor V.

2014-02-11T23:59:59.000Z

423

Method and apparatus for PM filter regeneration  

DOE Patents [OSTI]

A method and apparatus for initiating regeneration of a particulate matter (PM) filter in an exhaust system in an internal combustion engine. The method and apparatus includes determining a change in pressure of exhaust gases passing through the PM filter, and responsively varying an opening of an intake valve in fluid communication with a combustion chamber.

Opris, Cornelius N. (Peoria, IL); Verkiel, Maarten (Metamora, IL)

2006-01-03T23:59:59.000Z

424

A Statistical Solar Flare Forecast Method  

E-Print Network [OSTI]

A Bayesian approach to solar flare prediction has been developed, which uses only the event statistics of flares already observed. The method is simple, objective, and makes few ad hoc assumptions. It is argued that this approach should be used to provide a baseline prediction for certain space weather purposes, upon which other methods, incorporating additional information, can improve. A practical implementation of the method for whole-Sun prediction of Geostationary Observational Environment Satellite (GOES) events is described in detail, and is demonstrated for 4 November 2003, the day of the largest recorded GOES flare. A test of the method is described based on the historical record of GOES events (1975-2003), and a detailed comparison is made with US National Oceanic and Atmospheric Administration (NOAA) predictions for 1987-2003. Although the NOAA forecasts incorporate a variety of other information, the present method out-performs the NOAA method in predicting mean numbers of event days, for both M-X and X events. Skill scores and other measures show that the present method is slightly less accurate at predicting M-X events than the NOAA method, but substantially more accurate at predicting X events, which are important contributors to space weather.

M. S. Wheatland

2005-05-14T23:59:59.000Z

425

CHANGE-POINT METHODS Douglas M. Hawkins  

E-Print Network [OSTI]

been proposed as tools for following up signals given by other charting methods, when their likelihood: Change-point, LRT, GLR, Phase I, Phase II, SPC. 1 #12;1 INTRODUCTION Statistical process control methods will assume is unknown. If both 0 and 1 are known, then the SPC diagnostic of choice is generally

Qiu, Peihua

426

Advanced particulate matter control apparatus and methods  

DOE Patents [OSTI]

Apparatus and methods for collection and removal of particulate matter, including fine particulate matter, from a gas stream, comprising a unique combination of high collection efficiency and ultralow pressure drop across the filter. The apparatus and method utilize simultaneous electrostatic precipitation and membrane filtration of a particular pore size, wherein electrostatic collection and filtration occur on the same surface.

Miller, Stanley J. (Grand Forks, ND); Zhuang, Ye (Grand Forks, ND); Almlie, Jay C. (East Grand Forks, MN)

2012-01-10T23:59:59.000Z

427

Method and apparatus for synthesizing filamentary structures  

DOE Patents [OSTI]

Method and apparatus for producing filamentary structures. The structures include single-walled nanotubes. The method includes combusting hydrocarbon fuel and oxygen to establish a non-sooting flame and providing an unsupported catalyst to synthesize the filamentary structure in a post-flame region of the flame. Residence time is selected to favor filamentary structure growth.

Height, Murray J. (Somerville, MA); Howard, Jack B. (Winchester, MA); Vandersande, John B. (Newbury, MA)

2008-02-26T23:59:59.000Z

428

Method for releasing hydrogen from ammonia borane  

DOE Patents [OSTI]

A method of releasing hydrogen from ammonia borane is disclosed. The method comprises heating an aqueous ammonia borane solution to between about 80-135.degree. C. at between about 14.7 and 200 pounds per square inch absolute (psia) to release hydrogen by hydrothermolysis.

Varma, Arvind; Diwan, Moiz; Shafirovich, Evgeny; Hwang, Hyun-Tae; Al-Kukhun, Ahmad

2013-02-19T23:59:59.000Z

429

Method of fabrication of anchored nanostructure materials  

SciTech Connect (OSTI)

Methods for fabricating anchored nanostructure materials are described. The methods include heating a nano-catalyst under a protective atmosphere to a temperature ranging from about 450.degree. C. to about 1500.degree. C. and contacting the heated nano-catalysts with an organic vapor to affix carbon nanostructures to the nano-catalysts and form the anchored nanostructure material.

Seals, Roland D; Menchhofer, Paul A; Howe, Jane Y; Wang, Wei

2013-11-26T23:59:59.000Z

430

Method for mask repair using defect compensation  

DOE Patents [OSTI]

A method for repair of amplitude and/or phase defects in lithographic masks. The method involves modifying or altering a portion of the absorber pattern on the surface of the mask blank proximate to the mask defect to compensate for the local disturbance (amplitude or phase) of the optical field due to the defect.

Sweeney, Donald W. (San Ramon, CA); Ray-Chaudhuri, Avijit K. (Livermore, CA)

2001-01-01T23:59:59.000Z

431

Apparatus and method for oxidizing organic materials  

DOE Patents [OSTI]

The invention is a method and apparatus using high cerium concentration in the anolyte of an electrochemical cell to oxidize organic materials. The method and apparatus further use an ultrasonic mixer to enhance the oxidation rate of the organic material in the electrochemical cell. 6 figs.

Surma, J.E.; Bryan, G.H.; Geeting, J.G.H.; Butner, R.S.

1998-01-13T23:59:59.000Z

432

ENERGY CONSERVATION WITH NONSYMPLECTIC METHODS: EXAMPLES AND  

E-Print Network [OSTI]

ENERGY CONSERVATION WITH NON­SYMPLECTIC METHODS: EXAMPLES AND COUNTER­EXAMPLES ERWAN FAOU 1 , ERNST. email: Ernst.Hairer@math.unige.ch, Truong­Linh.Pham@math.unige.ch Abstract. Energy conservation into energy conservation with non­ symplectic methods. Su#cient conditions and counter­examples are presented

Hairer, Ernst

433

Random Fractal Measures via the Contraction Method  

E-Print Network [OSTI]

Random Fractal Measures via the Contraction Method John E. Hutchinson Australian National mapping method to prove various existence and uniqueness properties of (self­similar) random fractal in order to establish a.s. exponential convergence to the unique random fractal measure. The arguments used

RĂĽschendorf, Ludger

434

Multiprocessor computer overset grid method and apparatus  

DOE Patents [OSTI]

A multiprocessor computer overset grid method and apparatus comprises associating points in each overset grid with processors and using mapped interpolation transformations to communicate intermediate values between processors assigned base and target points of the interpolation transformations. The method allows a multiprocessor computer to operate with effective load balance on overset grid applications.

Barnette, Daniel W. (Veguita, NM); Ober, Curtis C. (Los Lunas, NM)

2003-01-01T23:59:59.000Z

435

Gnie mcanique Implementing the Quotient Method Controller  

E-Print Network [OSTI]

of this project was to apply this method on a Ball-on-a- Wheel system. This system consists of a ball rolling the ball-on-a-wheel system it is important to have a sufficiently fast sampling rate. Normal webcamsSECTION DE Génie mécanique Implementing the Quotient Method Controller on the Ball-on-a-Wheel

Lausanne, Ecole Polytechnique Fédérale de

436

Evaluation of traffic signal controller transition methods  

E-Print Network [OSTI]

% capacity at the coordinated phase for the 30 minutes and at no volume for the remaining 5 minutes. The signal timing plans were fixed at a 120-second cycle length. The transition methods for each of the offset changes were tested to find the method...

Hamilton, Curtis Lloyd

2000-01-01T23:59:59.000Z

437

On the order of general linear methods.  

SciTech Connect (OSTI)

General linear (GL) methods are numerical algorithms used to solve ODEs. The standard order conditions analysis involves the GL matrix itself and a starting procedure; however, a finishing method (F) is required to extract the actual ODE solution. The standard order analysis and stability are sufficient for the convergence of any GL method. Nonetheless, using a simple GL scheme, we show that the order definition may be too restrictive. Specifically, the order for GL methods with low order intermediate components may be underestimated. In this note we explore the order conditions for GL schemes and propose a new definition for characterizing the order of GL methods, which is focused on the final result--the outcome of F--and can provide more effective algebraic order conditions.

Constantinescu, E. M.; Mathematics and Computer Science

2009-09-01T23:59:59.000Z

438

Method and apparatus for ceramic analysis  

DOE Patents [OSTI]

The present invention relates to a method and apparatus for ceramic analysis, in particular, a method for analyzing density, density gradients and/or microcracks, including an apparatus with optical instrumentation for analysis of density, density gradients and/or microcracks in ceramics. The method provides analyzing density of a ceramic comprising exciting a component on a surface/subsurface of the ceramic by exposing the material to excitation energy. The method may further include the step of obtaining a measurement of an emitted energy from the component. The method may additionally include comparing the measurement of the emitted energy from the component with a predetermined reference measurement so as to obtain a density for said ceramic.

Jankowiak, Ryszard J. (Ames, IA); Schilling, Chris (Ames, IA); Small, Gerald J. (Ames, IA); Tomasik, Piotr (Cracow, PL)

2003-04-01T23:59:59.000Z

439

Alignment method for parabolic trough solar concentrators  

DOE Patents [OSTI]

A Theoretical Overlay Photographic (TOP) alignment method uses the overlay of a theoretical projected image of a perfectly aligned concentrator on a photographic image of the concentrator to align the mirror facets of a parabolic trough solar concentrator. The alignment method is practical and straightforward, and inherently aligns the mirror facets to the receiver. When integrated with clinometer measurements for which gravity and mechanical drag effects have been accounted for and which are made in a manner and location consistent with the alignment method, all of the mirrors on a common drive can be aligned and optimized for any concentrator orientation.

Diver, Richard B. (Albuquerque, NM)

2010-02-23T23:59:59.000Z

440

Method for making nanoporous hydrophobic coatings  

DOE Patents [OSTI]

A simple coating method is used to form nanoporous hydrophobic films that can be used as optical coatings. The method uses evaporation-induced self-assembly of materials. The coating method starts with a homogeneous solution comprising a hydrophobic polymer and a surfactant polymer in a selective solvent. The solution is coated onto a substrate. The surfactant polymer forms micelles with the hydrophobic polymer residing in the particle core when the coating is dried. The surfactant polymer can be dissolved and selectively removed from the separated phases by washing with a polar solvent to form the nanoporous hydrophobic film.

Fan, Hongyou

2013-04-23T23:59:59.000Z

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Method and apparatus for testing microfilaments  

DOE Patents [OSTI]

A method and apparatus are disclosed for testing tensile strength of microfilaments. Fibers as small as 0.001 inch in diameter and 0.04 inches in length have been tested, although the method and apparatus of the invention are capable of testing fibers of smaller diameter and length. The invention utilizes a method wherein one or both ends of a microfilament is gripped using resin which is softened sufficiently to accept an end of the microfilament and then allowed to harden. The invention also employs the use of a translation stage capable of controlled three-dimensional movement suited to facilitating gripping of the microfilament. 2 figs.

Schleitweiler, P.M.; Merten, C.W. Jr.

1995-08-01T23:59:59.000Z

442

Apparatuses and methods for generating electric fields  

DOE Patents [OSTI]

Apparatuses and methods relating to generating an electric field are disclosed. An electric field generator may include a semiconductive material configured in a physical shape substantially different from a shape of an electric field to be generated thereby. The electric field is generated when a voltage drop exists across the semiconductive material. A method for generating an electric field may include applying a voltage to a shaped semiconductive material to generate a complex, substantially nonlinear electric field. The shape of the complex, substantially nonlinear electric field may be configured for directing charged particles to a desired location. Other apparatuses and methods are disclosed.

Scott, Jill R; McJunkin, Timothy R; Tremblay, Paul L

2013-08-06T23:59:59.000Z

443

A General Symbolic Method with Physical Applications  

E-Print Network [OSTI]

A solution to the problem of unifying the General Relativistic and Quantum Theoretical formalisms is given which introduces a new non-axiomatic symbolic method and an algebraic generalization of the Calculus to non-finite symbolisms without reference to the concept of a limit. An essential feature of the non-axiomatic method is the inadequacy of any (finite) statements: Identifying this aspect of the theory with the "existence of an external physical reality" both allows for the consistency of the method with the results of experiments and avoids the so-called "measurement problem" of quantum theory.

Gregory M. Smith

2000-06-28T23:59:59.000Z

444

Phosphorescent compositions, methods of making the compositions, and methods of using the compositions  

SciTech Connect (OSTI)

Compositions, methods of making compositions, materials including compositions, crayons including compositions, paint including compositions, ink including compositions, waxes including compositions, polymers including compositions, vesicles including the compositions, methods of making each, and the like are disclosed.

Jia, Weiyi; Wang, Xiaojun; Jia, George D.; Lewis, Linda; Yen, Laurel C.

2014-06-24T23:59:59.000Z

445

Nuclear Structure and Reactions (Quantum Monte Carlo, Lanczos Methods, Density Functional Methods), June 6 10  

E-Print Network [OSTI]

Nuclear Structure and Reactions (Quantum Monte Carlo, Lanczos Methods, Density Functional Methods systems: nuclei and the unitary Fermi gas" Thursday, June 9 10:00 am Stefano Gandolfi "Ab

Washington at Seattle, University of - Department of Physics, Electroweak Interaction Research Group

446

Transient method of characteristics via the Adiabatic, Theta, and Multigrid Amplitude Function methods  

E-Print Network [OSTI]

In this thesis, we investigated the Adiabatic, Theta, and Multigrid Amplitude Function (MAF) methods for solving the Method of Characteristics (MOC) formulation of the time-dependent neutron transport equation. The transient ...

Shaner, Samuel Christopher

2014-01-01T23:59:59.000Z

447

Comparison of the "method of limits" and "alternate choice" methods in vibrometry testing  

E-Print Network [OSTI]

are the "method of limits" and "alternate choice" techniques. This investigation evaluated and compared these two techniques. The primary purpose of this investigation was to determine if these testing methods obtain the same vibration threshold... and to invesugate the relationship between the methods. The methods were used to test male and female populations for their vibration sensitivity in the median nerve (index finger) and the ulnar nerve (little finger) of both hands. This study utilized...

Hayes, Eloise Carlton

1992-01-01T23:59:59.000Z

448

The Island Confinement Method for Reducing Search Space in Local Search Methods  

E-Print Network [OSTI]

The Island Confinement Method for Reducing Search Space in Local Search Methods H. Fang Y. Kilani J.H.M. Lee § P.J. Stuckey ¶ July 14, 2006 Abstract Typically local search methods for solving problem. Each constraint contributes part of a penalty function in assessing trial valuations. Local

Stuckey, Peter J.

449

A new database generation method combining maximin method and kriging prediction for eddy-current testing  

E-Print Network [OSTI]

A new database generation method combining maximin method and kriging prediction for eddy in the domain of ECT ­ of using databases appeared recently. The database consists of well-chosen pairs of input the database instead of recoursing to the complicated and expensive-to-run simulation methods. How- ever

Paris-Sud XI, Université de

450

Earth analysis methods, subsurface feature detection methods, earth analysis devices, and articles of manufacture  

DOE Patents [OSTI]

Earth analysis methods, subsurface feature detection methods, earth analysis devices, and articles of manufacture are described. According to one embodiment, an earth analysis method includes engaging a device with the earth, analyzing the earth in a single substantially lineal direction using the device during the engaging, and providing information regarding a subsurface feature of the earth using the analysis.

West, Phillip B. (Idaho Falls, ID); Novascone, Stephen R. (Idaho Falls, ID); Wright, Jerry P. (Idaho Falls, ID)

2012-05-29T23:59:59.000Z

451

Earth analysis methods, subsurface feature detection methods, earth analysis devices, and articles of manufacture  

DOE Patents [OSTI]

Earth analysis methods, subsurface feature detection methods, earth analysis devices, and articles of manufacture are described. According to one embodiment, an earth analysis method includes engaging a device with the earth, analyzing the earth in a single substantially lineal direction using the device during the engaging, and providing information regarding a subsurface feature of the earth using the analysis.

West, Phillip B. (Idaho Falls, ID); Novascone, Stephen R. (Idaho Falls, ID); Wright, Jerry P. (Idaho Falls, ID)

2011-09-27T23:59:59.000Z

452

Alignment method for solar collector arrays  

DOE Patents [OSTI]

The present invention is directed to an improved method for establishing camera fixture location for aligning mirrors on a solar collector array (SCA) comprising multiple mirror modules. The method aligns the mirrors on a module by comparing the location of the receiver image in photographs with the predicted theoretical receiver image location. To accurately align an entire SCA, a common reference is used for all of the individual module images within the SCA. The improved method can use relative pixel location information in digital photographs along with alignment fixture inclinometer data to calculate relative locations of the fixture between modules. The absolute locations are determined by minimizing alignment asymmetry for the SCA. The method inherently aligns all of the mirrors in an SCA to the receiver, even with receiver position and module-to-module alignment errors.

Driver, Jr., Richard B

2012-10-23T23:59:59.000Z

453

A Brief History of Filter Methods  

E-Print Network [OSTI]

Oct 9, 2006 ... The transition of filter methods to fast local convergence had been an .... iterations. This strategy allows the filter to accept points that would otherwise be rejected. ..... Department of Energy, under Contract W-31-109-ENG-38.

2006-10-10T23:59:59.000Z

454

Microfluidic microarray systems and methods thereof  

DOE Patents [OSTI]

Disclosed are systems that include a manifold in fluid communication with a microfluidic chip having a microarray, an illuminator, and a detector in optical communication with the microarray. Methods for using these systems for biological detection are also disclosed.

West, Jay A. A. (Castro Valley, CA); Hukari, Kyle W. (San Ramon, CA); Hux, Gary A. (Tracy, CA)

2009-04-28T23:59:59.000Z

455

Evaluation of alternative superelevation distribution methods  

E-Print Network [OSTI]

distribution methodologies currently used in the United States do not provide a clear understanding of the operational characteristics of these methods. These methodologies were developed on the 1930's, 1940's, and 1950's. Since then, roadway, pavement...

Labrador, Ramon

1998-01-01T23:59:59.000Z

456

ITERATIVE METHODS FOR NEUTRON TRANSPORT EIGENVALUE PROBLEMS  

E-Print Network [OSTI]

Abstract. We discuss iterative methods for computing criticality in nuclear reactors. In general as the inner solver. Key words. neutron transport, criticality, generalised eigenvalue problem, symmetry. Reactor criticality problems. Climate change is a challenging problem of great contemporary interest

Graham, Ivan

457

CONVERGENCE OF THE GRIDDY GIBBS SAMPLING METHOD ...  

E-Print Network [OSTI]

[2] Jun S. Liu et. al., The Multiple-Try Method and Local Optimization in Metropolis ... [23] Lipniacki T., Hat B., Faeder J.R., Hlavacek W.S, Journal of Theoretical ...

2013-08-17T23:59:59.000Z

458

Composite Proximal Bundle Method - Optimization Online  

E-Print Network [OSTI]

[Ous00], [MS05], [Nes07], and the V-space identification method in [DSS09]. ...... bulk of BFGS too much (at least when compared to applying directly CBun).

2011-04-26T23:59:59.000Z

459

Microorganism genomics, compositions and methods related thereto  

DOE Patents [OSTI]

The present invention provides methods and compositions for accessing, in a generally unbaised manner, a diverse genetic pool for genes involved in biosynthetic pathways. The invention also provides compounds which can be identified by cloning biosynthetic pathways.

Handelsman, Jo (Madison, WI); Goodman, Robert M. (Madison, WI); Rondon, Michelle R. (Madison, WI)

2001-01-01T23:59:59.000Z

460

Alternate cleaning methods for LCCAs. Final report  

SciTech Connect (OSTI)

The purpose of this project was to evaluate DI water followed by isopropyl alcohol (IPA) cleaning and no cleaning of leadless chip carriers (LCCs). Both environmentally safe methods were to be tested against the current chlorofluorocarbon (CFC) material cleaning baseline. Several experiments were run to compare production and electrical yields of LCCs cleaned by all three methods. The critical process steps most affected by cleaning were wire bonding, sealing, particle induced noise detection (PIND), moisture content, and electrical. Yields for the experimental lots cleaned by CFC, DI water plus IPA, and no cleaning were 56%, 72%, and 75%, respectively. The overall results indicated that vapor degreasing/ultrasonic cleaning in CFCs could be replaced by the aqueous method. No cleaning could also be considered if an effective dry method of particle removal could be developed.

Adams, B.E.

1993-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Flow cytometric detection method for DNA samples  

DOE Patents [OSTI]

Disclosed herein are two methods for rapid multiplex analysis to determine the presence and identity of target DNA sequences within a DNA sample. Both methods use reporting DNA sequences, e.g., modified conventional Taqman.RTM. probes, to combine multiplex PCR amplification with microsphere-based hybridization using flow cytometry means of detection. Real-time PCR detection can also be incorporated. The first method uses a cyanine dye, such as, Cy3.TM., as the reporter linked to the 5' end of a reporting DNA sequence. The second method positions a reporter dye, e.g., FAM.TM. on the 3' end of the reporting DNA sequence and a quencher dye, e.g., TAMRA.TM., on the 5' end.

Nasarabadi,Shanavaz (Livermore, CA); Langlois, Richard G. (Livermore, CA); Venkateswaran, Kodumudi S. (Round Rock, TX)

2011-07-05T23:59:59.000Z

462

Method for protection against genotoxic mutagenesis  

DOE Patents [OSTI]

This research discloses a method and pharmaceutical for protecting against mutational damage in mammalian cells, irrespective of the nature of the mutagenic event or source of radiational or chemical insult or the like. 54 figs.

Grdina, D.J.

1999-02-09T23:59:59.000Z

463

Carbon nanotubes : a study on assembly methods  

E-Print Network [OSTI]

The urgent stipulation is to manufacture CNTs of desired properties and dimensions. The heart of this yearning lies in understanding the growth and assembly methods of CNTs, which are not yet clear. In this study, hence, ...

Quińones, Lisandro E. (Quińones Ortiz)

2008-01-01T23:59:59.000Z

464

Multiple network interface core apparatus and method  

DOE Patents [OSTI]

A network interface controller and network interface control method comprising providing a single integrated circuit as a network interface controller and employing a plurality of network interface cores on the single integrated circuit.

Underwood, Keith D. (Albuquerque, NM); Hemmert, Karl Scott (Albuquerque, NM)

2011-04-26T23:59:59.000Z

465

Method for making spherical binderless pellets  

DOE Patents [OSTI]

A method for making spherical binderless pellets using a rotating drum mixer whereby at least a portion of the particles comprising the pellets is comprised of coking coal particles.

Grubbs, Donald K. (Rector, PA); Kochanowski, Andrew T. (Spring Church, PA)

1983-01-01T23:59:59.000Z

466

Lagrangian methods for ballistic impact simulations/  

E-Print Network [OSTI]

This thesis explores various Lagrangian methods for simulating ballistic impact with the ultimate goal of finding a universal, robust and scalable computational framework to assist in the design of armor systems. An overview ...

Tupek, Michael Ronne

2010-01-01T23:59:59.000Z

467

Analytical homogenization method for periodic composite materials  

E-Print Network [OSTI]

We present an easy-to-implement technique for determining the effective properties of composite materials with periodic microstructures, as well as the field distributions in them. Our method is based on the transformation ...

Chen, Ying

468

Inversions in astronomy and the SOLA method  

E-Print Network [OSTI]

This paper was presented at the Institute for Mathematics and its Applications workshop "Inverse problems in wave propagation" and will appear in the series IMA volumes (Springer). A brief overview of applications of inversions within astronomy is presented and also an inventory of techniques commonly in use. Most of this paper is focussed on the method of Subtractive Optimally Localized Averages (SOLA) which is an adaptation of the Backus and Gilbert method. This method was originally developed for use in helioseismology where the Backus and Gilbert method is computationally too slow. Since then it has also been applied to the problem of reverberation mapping of active galactic nuclei and the differences between this inverse problem and the ones of helioseismology are also discussed.

F. P. Pijpers

1995-06-14T23:59:59.000Z

469

Fast Methods for Bimolecular Charge Optimization  

E-Print Network [OSTI]

We report a Hessian-implicit optimization method to quickly solve the charge optimization problem over protein molecules: given a ligand and its complex with a receptor, determine the ligand charge distribution that minimizes ...

Bardhan, Jaydeep P.

470

Flow cytometric detection method for DNA samples  

DOE Patents [OSTI]

Disclosed herein are two methods for rapid multiplex analysis to determine the presence and identity of target DNA sequences within a DNA sample. Both methods use reporting DNA sequences, e.g., modified conventional Taqman.RTM. probes, to combine multiplex PCR amplification with microsphere-based hybridization using flow cytometry means of detection. Real-time PCR detection can also be incorporated. The first method uses a cyanine dye, such as, Cy3.TM., as the reporter linked to the 5' end of a reporting DNA sequence. The second method positions a reporter dye, e.g., FAM, on the 3' end of the reporting DNA sequence and a quencher dye, e.g., TAMRA, on the 5' end.

Nasarabadi, Shanavaz (Livermore, CA); Langlois, Richard G. (Livermore, CA); Venkateswaran, Kodumudi S. (Livermore, CA)

2006-08-01T23:59:59.000Z

471

High-temperature thermocouples and related methods  

DOE Patents [OSTI]

A high-temperature thermocouple and methods for fabricating a thermocouple capable of long-term operation in high-temperature, hostile environments without significant signal degradation or shortened thermocouple lifetime due to heat induced brittleness.

Rempe, Joy L. (Idaho Falls, ID); Knudson, Darrell L. (Firth, ID); Condie, Keith G. (Idaho Falls, ID); Wilkins, S. Curt (Idaho Falls, ID)

2011-01-18T23:59:59.000Z

472

Project evaluation : a practical asset pricing method  

E-Print Network [OSTI]

This paper presents a practical approach to project evaluation using techniques of modern financial economics, with a sample application to oil development under a complex tax system. The method overcomes shortcomings of ...

Jacoby, Henry D.

1992-01-01T23:59:59.000Z

473

Method for preparation of single chain antibodies  

DOE Patents [OSTI]

This invention provides a method for identifying cells expressing a target single chain antibody (scFv) directed against a target antigen from a collection of cells that includes cells that do not express the target scFv, comprising the step of combining the collection of cells with an anti-idiotype directed to an antibody specific for the target antigen and detecting interaction, if any, of the anti-idiotype with the cells, wherein the occurrence of an interaction identifies the cell as one which expresses the target scFv. This invention also provides a method for making a single chain antibody (scFv) directed against an antigen, wherein the selection of clones is made based upon interaction of those clones with an appropriate anti-idiotype, and heretofore inaccessible scFv so made. This invention provides the above methods or any combination thereof. Finally, this invention provides various uses of these methods.

Cheung, Nai-Kong V. (New York, NY); Guo, Hong-fen (New York, NY)

2012-04-03T23:59:59.000Z

474

Method of preparing nitrogen containing semiconductor material  

DOE Patents [OSTI]

A method of combining group III elements with group V elements that incorporates at least nitrogen from a nitrogen halide for use in semiconductors and in particular semiconductors in photovoltaic cells.

Barber, Greg D.; Kurtz, Sarah R.

2004-09-07T23:59:59.000Z

475

X-Ray Nanoimaging: Instruments and Methods  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

X-Ray Nanoimaging: Instruments and Methods To be held as part of SPIE. http:spie.orgOP318 August 28-29, 2013; San Diego, California, USA...

476

Electrical condition monitoring method for polymers  

DOE Patents [OSTI]

An electrical condition monitoring method utilizes measurement of electrical resistivity of an age sensor made of a conductive matrix or composite disposed in a polymeric structure such as an electrical cable. The conductive matrix comprises a base polymer and conductive filler. The method includes communicating the resistivity to a measuring instrument and correlating resistivity of the conductive matrix of the polymeric structure with resistivity of an accelerated-aged conductive composite.

Watkins, Jr., Kenneth S. (Dahlonega, GA); Morris, Shelby J. (Hampton, VA); Masakowski, Daniel D. (Worcester, MA); Wong, Ching Ping (Duluth, GA); Luo, Shijian (Boise, ID)

2008-08-19T23:59:59.000Z

477

Quasiprobability methods for multimode conditional optical gates  

E-Print Network [OSTI]

We present a method for computing the action of conditional linear optical transformations, conditioned on photon counting, for arbitrary signal states. The method is based on the Q-function, a quasi probability distribution for anti normally ordered moments. We treat an arbitrary number of signal and ancilla modes. The ancilla modes are prepared in an arbitrary product number state. We construct the conditional, non unitary, signal transformations for an arbitrary photon number count on each of the ancilla modes.

G. J. Milburn

2006-12-05T23:59:59.000Z

478

Method of ultrasonic measurement of texture  

DOE Patents [OSTI]

A method for measuring texture of metal plates or sheets using non-destructive ultrasonic investigation includes measuring the velocity of ultrasonic energy waves in lower order plate modes in one or more directions, and measuring phase velocity dispersion of higher order modes of the plate or sheet if needed. Texture or preferred grain orientation can be derived from these measurements with improves reliability and accuracy. The method can be utilized in production on moving metal plate or sheet. 9 figures.

Thompson, R.B.; Smith, J.F.; Lee, S.S.; Taejon Ch'ungmam; Yan Li.

1993-10-12T23:59:59.000Z

479

Method of ultrasonic measurement of texture  

DOE Patents [OSTI]

A method for measuring texture of metal plates or sheets using non-destructive ultrasonic investigation includes measuring the velocity of ultrasonic energy waves in lower order plate modes in one or more directions, and measuring phase velocity dispersion of higher order modes of the plate or sheet if needed. Texture or preferred grain orientation can be derived from these measurements with improves reliability and accuracy. The method can be utilized in production on moving metal plate or sheet.

Thompson, R. Bruce (Ames, IA); Smith, John F. (Ames, IA); Lee, Seung S. (Taejon Ch'ungmam, KR); Li, Yan (Ames, IA)

1993-10-12T23:59:59.000Z

480

Method of making straight fuel cell tubes  

DOE Patents [OSTI]

A method and an apparatus for making straight fuel cell tubes are disclosed. Extruded tubes comprising powders of fuel cell material and a solvent are dried by rotating the extruded tubes. The rotation process provides uniform circumferential drying which results in uniform linear shrinkage of the tubes. The resultant dried tubes are very straight, thereby eliminating subsequent straightening steps required with conventional processes. The method is particularly useful for forming inner air electrode tubes of solid oxide fuel cells.

Borglum, Brian P. (Edgewood, PA)

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "nucl instrum methods" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Encapsulation methods for organic electrical devices  

DOE Patents [OSTI]

The disclosure provides methods and materials suitable for use as encapsulation barriers in electronic devices. In one embodiment, for example, there is provided an electroluminescent device or other electronic device encapsulated by alternating layers of a silicon-containing bonding material and a ceramic material. The encapsulation methods provide, for example, electronic devices with increased stability and shelf-life. The invention is useful, for example, in the field of microelectronic devices.

Blum, Yigal D.; Chu, William Siu-Keung; MacQueen, David Brent; Shi, Yijian

2013-06-18T23:59:59.000Z

482

A computer method for perspective drawing  

E-Print Network [OSTI]

A COMPUTER METHOD FOR PERSPECTIVE DRAWING A Thesis By' HERBERT RAY HAYNES Submitted to the Graduate College of' the Texas A8cM University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE August 1966 Major... Subject: Computer Science A COMPUTER METHOD FOR PERSPECTIVE DRAWING A Thesis HERBERT RAY HAYNES Approved as to style and content by: Chairman oi' Committee M er Member August 1966 ACKNOWLEDGEMENTS The assistance of the following members of my...

Haynes, Herbert Ray

2012-06-07T23:59:59.000Z

483

Method for removing contaminants from plastic resin  

DOE Patents [OSTI]

A resin recycling method that produces essentially contaminant-free synthetic resin material in an environmentally safe and economical manner. The method includes receiving the resin in container form. The containers are then ground into resin particles. The particles are exposed to a solvent, the solvent contacting the resin particles and substantially removing contaminants on the resin particles. After separating the particles and the resin, a solvent removing agent is used to remove any residual solvent remaining on the resin particles after separation.

Bohnert, George W. (Harrisonville, MO); Hand, Thomas E. (Lee's Summit, MO); DeLaurentiis, Gary M. (Jamestown, CA)

2008-12-09T23:59:59.000Z

484

Agouti polynucleotide compositions and methods of use  

DOE Patents [OSTI]

Disclosed are methods and compositions comprising novel agouti polypeptides and the polynucleotides which encode them. Also disclosed are DNA segments encoding these proteins derived from human and murine cell lines, and the use of these polynucleotides and polypeptides in a variety of diagnostic and therapeutic applications. Methods, compositions, kits, and devices are also provided for identifying compounds which are inhibitors of agouti activity, and for altering fatty acid synthetase activity and intracellular calcium levels in transformed cells.

Woychik, Richard P. (Orinda, CA); Bultman, Scott J. (Lakewood, OH); Michaud, Edward J. (Kingston, TN)

2003-02-04T23:59:59.000Z

485

Power generation method including membrane separation  

DOE Patents [OSTI]

A method for generating electric power, such as at, or close to, natural gas fields. The method includes conditioning natural gas containing C.sub.3+ hydrocarbons and/or acid gas by means of a membrane separation step. This step creates a leaner, sweeter, drier gas, which is then used as combustion fuel to run a turbine, which is in turn used for power generation.

Lokhandwala, Kaaeid A. (Union City, CA)

2000-01-01T23:59:59.000Z

486

Compositions and methods for improved plant feedstock  

DOE Patents [OSTI]

The invention provides methods for modifying lignin content and composition in plants and achieving associated benefits therefrom involving altered expression of newly discovered MYB4 transcription factors. Nucleic acid constructs for modifying MYB4 transcription factor expression are described. By over-expressing the identified MYB4 transcription factors, for example, an accompanying decrease in lignin content may be achieved. Plants are provided by the invention comprising such modifications, as are methods for their preparation and use.

Shen, Hui; Chen, Fang; Dixon, Richard A

2014-12-02T23:59:59.000Z

487

Method for the photocatalytic conversion of methane  

DOE Patents [OSTI]

A method for converting methane to methanol is provided comprising subjecting the methane to visible light in the presence of a catalyst and an electron transfer agent. Another embodiment of the invention provides for a method for reacting methane and water to produce methanol and hydrogen comprising preparing a fluid containing methane, an electron transfer agent and a photolysis catalyst, and subjecting said fluid to visible light for an effective period of time. 3 figs.

Noceti, R.P.; Taylor, C.E.; D`Este, J.R.

1998-02-24T23:59:59.000Z

488

Method of synthesizing a low density material  

DOE Patents [OSTI]

A novel method of synthesizing a polymeric material of low density of the order of 50mg/cc or less. Such a low density material has applications in many areas including laser target fabrication. The method comprises preparing a polymer blend of two incompatible polymers as a major and a minor phase by mixing them and extruding the mixture, and then selectively extracting the major component, to yield a fine, low density structure.

Lorensen, L.E.; Monaco, S.B.

1987-02-27T23:59:59.000Z

489

Comparison of Different Methods of Harvesting Cotton.  

E-Print Network [OSTI]

- - TEXAS AGRICULTURAL EXPERIMENT STATION R. D. LEWIS, Director College Station. Texas BULLETIN NO. 683 OCTOBER, 1946 COMPARISON OF DIFFERENT METHODS OF HARVESTING COTTON Division of Agricultural Engineering . and Division of Agronomy... on the rougher methods of harvesting cotton, such as hand-snapping and machine harvesting both with the picker type and the stripper type mechanical harvesters. This n-as largely because the lint from the roughly harvested cottons contained more foreign...

Smith, H. P. (Harris Pearson)

1946-01-01T23:59:59.000Z

490

GIS Method for Developing Wind Supply Curves  

SciTech Connect (OSTI)

This report describes work conducted by the National Renewable Energy Laboratory (NREL) as part of the Wind Technology Partnership (WTP) sponsored by the U.S. Environmental Protection Agency (EPA). This project has developed methods that the National Development and Reform Commission (NDRC) intends to use in the planning and development of China's 30 GW of planned capacity. Because of China's influence within the community of developing countries, the methods and the approaches here may help foster wind development in other countries.

Kline, D.; Heimiller, D.; Cowlin, S.

2008-06-01T23:59:59.000Z

491

Colloid labelled with radionuclide and method  

DOE Patents [OSTI]

A ferric hydroxide colloid having an alpha-emitting radionuclide essentially on the outer surfaces and a method of forming same. The method includes oxidizing a ferrous hydroxide to ferric hydroxide in the presence of a preselected radionuclide to form a colloid having the radionuclide on the outer surface thereof, and thereafter washing the colloid, and suspending the washed colloid in a suitable solution. The labelled colloid is useful in cancer therapy and for the treatment of inflamed joints.

Atcher, Robert W. (Chicago, IL); Hines, John J. (GlenEllyn, IL)

1990-01-01T23:59:59.000Z

492

Method of making colloid labeled with radionuclide  

DOE Patents [OSTI]

A ferric hydroxide colloid having an alpha-emitting radionuclide essentially on the outer surfaces and a method of forming same. The method includes oxidizing a ferrous hydroxide to ferric hydroxide in the presence of a preselected radionuclide to form a colloid having the radionuclide on the outer surface thereof, and thereafter washing the colloid, and suspending the washed colloid in a suitable solution. The labelled colloid is useful in cancer therapy and for the treatment of inflamed joints.

Atcher, Robert W. (Chicago, IL); Hines, John J. (Glen Ellyn, IL)

1991-01-01T23:59:59.000Z

493

Colloid labelled with radionuclide and method  

DOE Patents [OSTI]

A ferric hydroxide colloid having an alpha-emitting radionuclide essentially on the outer surfaces and a method of forming same. The method includes oxidizing a ferrous hydroxide to ferric hydroxide in the presence of a preselected radionuclide to form a colloid having the radionuclide on the outer surface thereof, and thereafter washing the colloid, and suspending the washed colloid in a suitable solution. The labelled colloid is useful in cancer therapy and for the treatment of inflamed joints. No Drawings

Atcher, R.W.; Hines, J.J.

1990-11-13T23:59:59.000Z

494

Method for the photocatalytic conversion of methane  

DOE Patents [OSTI]

A method for converting methane to methanol is provided comprising subjecting the methane to visible light in the presence of a catalyst and an electron transfer agent. Another embodiment of the invention provides for a method for reacting methane and water to produce methanol and hydrogen comprising preparing a fluid containing methane, an electron transfer agent and a photolysis catalyst, and subjecting said fluid to visible light for an effective period of time.

Noceti, Richard P. (Pittsburgh, PA); Taylor, Charles E. (Pittsburgh, PA); D'Este, Joseph R. (Pittsburgh, PA)

1998-01-01T23:59:59.000Z

495

Method for fabricating apatite crystals and ceramics  

DOE Patents [OSTI]

The present invention provides a method of crystallizing Yb:C-FAP [Yb.sup.3+:Ca.sub.5(PO.sub.4).sub.3F], by dissolving the Yb:C-FAP in an acidic solution, following by neutralizing the solution. The present invention also provides a method of forming crystalline Yb:C-FAP by dissolving the component ingredients in an acidic solution, followed by forming a supersaturated solution.

Soules, Thomas F.; Schaffers, Kathleen I.; Tassano, Jr., John B.; Hollingsworth, Joel P.

2013-09-10T23:59:59.000Z

496

QCD Level Density from Maximum Entropy Method  

E-Print Network [OSTI]

We propose a method to calculate the QCD level density directly from the thermodynamic quantities obtained by lattice QCD simulations with the use of the maximum entropy method (MEM). Understanding QCD thermodynamics from QCD spectral properties has its own importance. Also it has a close connection to phenomenological analyses of the lattice data as well as experimental data on the basis of hadronic resonances. Our feasibility study shows that the MEM can provide a useful tool to study QCD level density.

Shinji Ejiri; Tetsuo Hatsuda

2005-09-24T23:59:59.000Z

497

Lagrangian Dual Interior-Point Methods for Semidefinite Programs1  

E-Print Network [OSTI]

method in the corrector procedure and an application of the conjugate ... use iterative methods such as the CG (conjugate gradient) method and the CR ( ...

498

Iterative methods for large-scale unconstrained optimization  

E-Print Network [OSTI]

T. Steihaug. The conjugate gradient method and trust regionsCholesky-conjugate gradient method for the iterativemethod. A vanilla conjugate-gradient method for minimizing q

Erway, Jennifer B.

2006-01-01T23:59:59.000Z

499

An Augmented Primal-Dual Method for Linear Conic Programs  

E-Print Network [OSTI]

Apr 11, 2007 ... apd-function with a conjugate gradient method illustrate the ... as a conjugate gradient type method or a limited memory BFGS method.

2007-04-11T23:59:59.000Z

500

About the Uniform Methods Project | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Methods Project The Uniform Methods Project is developing Methods for Determining Energy Efficiency Savings for Specific Measures through collaboration with energy efficiency...