National Library of Energy BETA

Sample records for notification form related

  1. SGP Shipment Notification Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PlainsShipment Notification Form SGP Related Links Virtual Tour Facilities and Instruments Central Facility Boundary Facility Extended Facility Intermediate Facility Radiometric...

  2. ENVIRONMENTAL NOTIFICATION FORM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Document(s) responsive to Item 1 TOC-ENV-NOT-2013-0019 Rev. 0 ENVIRONMENTAL NOTIFICATION FORM Date: 02/15/2013 Notification No.: TOC-ENV-NOT- 2013-0019 Name: D.L. Dyekman Revision No. 0 Section 1. Spills NA M ChemicalName: see section 3 below MSDS No.: n/a Regulated per 40 CFR 302: Yes 0 No 13EPCRA EHS: Yes Z No E3 CAS No.: n/ a Quantity Released: up to 300gal/yr Reportable Quantity (RO):_________ CAS No.: ________Quantity Released: ___________Reportable Quantity (RO):__________ CAS No.:

  3. Notification for Underground Storage Tanks (EPA Form 7530-1)...

    Open Energy Info (EERE)

    Notification for Underground Storage Tanks (EPA Form 7530-1) Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Notification for Underground Storage Tanks...

  4. RCRA Notification of Regulated Waste Activity (EPA Form 8700...

    Open Energy Info (EERE)

    Notification of Regulated Waste Activity (EPA Form 8700-12) Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: RCRA Notification of Regulated Waste Activity...

  5. Notification of Employee Rights under the National Labor Relations Act

    Broader source: Energy.gov [DOE]

    This Flash forwards a draft Federal Acquisition Regulation (FAR) clause, 52.222-40, Notification of Employee Rights under the National Labor Relations Act. Executive Order (EO) 13496, Notification of Employee Rights under Federal Labor Laws, dated January 30,2009, requires contractors and subcontractors to post a notice that informs employees of their rights under Federal labor laws, including the National Labor Relations Act. This Act encourages collective bargaining and protects the exercise by workers of their freedom to associate, to self organize and to designate representatives of their own choosing for the purpose of negotiating the terms and conditions of their employment.

  6. Early Notification Gages

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Early Notification Gages Early Notification Gages Every year, a few storms produce enough runoff on LANL land to reach the Rio Grande. August 1, 2013 Gage E060.1: Pueblo Canyon Gage E060.1: Pueblo Canyon RELATED IMAGES http://farm8.staticflickr.com/7325/9628681767_42d206d583

  7. EPA Notification for UST Form 7530-1 | Open Energy Information

    Open Energy Info (EERE)

    for UST Form 7530-1Legal Published NA Year Signed or Took Effect 2012 Legal Citation Not provided DOI Not Provided Check for DOI availability: http:crossref.org Online...

  8. DOE F 541, CI Solicitations Notification | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1, CI Solicitations Notification DOE F 541, CI Solicitations Notification This form is used for CI Solicitation Notification More Documents & Publications Update to Congressional Notifications - Acquisition Guide Chapter 5.1 and Guide to Financial Assistance Chapter 2, Section 2.6.1 Chapter 5 - Publicizing Contract Actions Policy Flash 2015-20

  9. U.S. Department of Energy Advanced Notification of Awards

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CI will receive a notification via email when there are pending award notifications to review. Select the link in the email to the online form that mimics the physical 4220.10...

  10. Procurement-Related Forms | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forms Procurement-Related Forms The following procurement-related forms are provided in PDF fillable andor Word format. Click the link in the "Format" column to open a copy of...

  11. CI SOLICITATION NOTIFICATION

    Energy Savers [EERE]

    DOE F 541 Rev. 112012 Office of Congressional and Intergovernmental Affairs (CI) CI SOLICITATION NOTIFICATION ...

  12. CI SOLICITATION NOTIFICATION

    Broader source: Energy.gov (indexed) [DOE]

    541 Rev. 112012 Office of Congressional and Intergovernmental Affairs (CI) CI SOLICITATION NOTIFICATION Before...

  13. Email Notification - DOE Directives, Delegations, and Requirements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Email Notification by Diane Johnson Use this form to subscribeunsubscribe to email alerts. Please select the type of email alert that you would like to receive. Your Name Please...

  14. Spray forming process for producing molds, dies and related tooling

    DOE Patents [OSTI]

    McHugh, Kevin M. (Idaho Falls, ID); Key, James F. (Idaho Falls, ID)

    1998-01-01

    A method for spray forming manufacturing of near-net-shape molds, dies and related toolings, wherein liquid material such as molten metal, metallic alloys, or polymers are atomized into fine droplets by a high temperature, high velocity gas and deposited onto a pattern. Quenching of the atomized droplets provides a heat sink, thereby allowing undercooled and partially solidified droplets to be formed in-flight. Composites can be formed by combining the atomized droplets with solid particles such as whiskers or fibers.

  15. Notifications and Communications

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-08-21

    This volume provides a description of appropriate notifications and communications during an emergency. Canceled by DOE G 151.1-4.

  16. Spray forming system for producing molds, dies and related tooling

    DOE Patents [OSTI]

    McHugh, Kevin M. (Idaho Falls, ID)

    2000-01-01

    A system for the spray forming manufacturing of near-net-shape molds, dies and related toolings, wherein liquid material such as molten metal, metallic alloys, or polymers are atomized into fine droplets by a high temperature, high velocity gas and deposited onto a pattern. Quenching of the atomized droplets provides a heat sink, thereby allowing undercooled and partially solidified droplets to be formed in-flight. Composites can be formed by combining the atomized droplets with solid particles such as powders, whiskers or fibers.

  17. Spray forming process for producing molds, dies and related tooling

    DOE Patents [OSTI]

    McHugh, K.M.; Key, J.F.

    1998-02-17

    A method is disclosed for spray forming manufacturing of near-net-shape molds, dies and related toolings, wherein liquid material such as molten metal, metallic alloys, or polymers are atomized into fine droplets by a high temperature, high velocity gas and deposited onto a pattern. Quenching of the atomized droplets provides a heat sink, thereby allowing undercooled and partially solidified droplets to be formed in-flight. Composites can be formed by combining the atomized droplets with solid particles such as whiskers or fibers. 17 figs.

  18. Drug Testing Notification | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Drug Testing Notification Drug Testing Notification PDF icon Drug Testing Notification More Documents & Publications Intergrated Drug Testing System, PIA, Bechtel Jacobs C ompany, ...

  19. Class 1 Permit Modification Notifications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Class 1 Permit Modification Notifications Editorial Changes in Monitoring Records Text in Part 1 Editorial Changes in Attachment C6 and Attachment C3 Update Table L-4 and List of Active Environmental Permits Clarify Text Related to Marking and Labeling Packages in Part 3 Clarify Table E-1a Revise Table 4.1.1 Revise Table G-1 Waste Isolation Pilot Plant Carlsbad, New Mexico NM4890139088-TSDF February 2014 Table of Contents Transmittal Letter Table of Contents

  20. Representation of integral dispersion relations by local forms

    SciTech Connect (OSTI)

    Ferreira, Erasmo; Sesma, Javier

    2008-03-15

    The representation of the usual integral dispersion relations (IDRs) of scattering theory through series of derivatives of the amplitudes is discussed, extended, simplified, and confirmed as mathematical identities. Forms of derivative dispersion relations (DDRs) valid for the whole energy interval, recently obtained and presented as double infinite series, are simplified through the use of new sum rules of the incomplete {gamma} functions, being reduced to single summations, where the usual convergence criteria are easily applied. For the forms of the imaginary amplitude used in phenomenology of hadronic scattering at high energies, we show that expressions for the DDR can represent, with absolute accuracy, the IDR of scattering theory, as true mathematical identities. Besides the fact that the algebraic manipulation can be easily understood, numerical examples show the accuracy of these representations up to the maximum available machine precision. As consequence of our work, it is concluded that the standard forms, sDDR, originally intended for high energy limits are an inconvenient and incomplete separation of terms of the full expression, leading to wrong evaluations. Since the correspondence between IDR and the DDR expansions is linear, our results have wide applicability, covering more general functions, built as combinations of well studied basic forms.

  1. Alarm Notification System

    Energy Science and Technology Software Center (OSTI)

    1995-03-12

    AN/EMS, the Alarm Notification Energy Management System, is used to monitor digital sensors in PETC buildings and to notify the safety/security operator by both a video and an audio system when a possibly hazardous condition arises.

  2. Systems Outage Notification Policy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    System Outages Systems Outage Notification Policy To be considered a scheduled outage, the user community must be notified of the need for a maintenance event window no less than 24 hours in advance of the outage (emergency fixes). Users will be notified of regularly scheduled maintenance in advance, on a schedule that provides sufficient notification, and no less than 72 hours prior to the event, and preferably as much as seven calendar days prior. If that regularly scheduled maintenance is not

  3. Property-Related Forms | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    right-click to download. Number* TitleDescription Format** UCN-21041 Property Management System Approval Form PDF-fil UCN-21042 Transmittal Form PDF-fil UCN-21043 Inventory of...

  4. New Emergency Equipment Notifications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Notifications Addition of New Emergency Equipment, Hazardous Waste Facility Permit Number: NM4890139088-TSDF Todd A. Shrader/CBFO and Philip J. Breidenbach/NWP dated October 20, 2015 Underground Fire Suppression Vehicles (2) Addition of New Emergency Equipment, Hazardous Waste Facility Permit Number: NM4890139088-TSDF Dana C. Bryson/CBFO and Philip J. Breidenbach/NWP dated September 30, 2015 Underground Ambulance #3 Addition of New Emergency Equipment, Hazardous Waste Facility Permit Number:

  5. Policy Flash 2014-10 Update to Congressional Notifications -...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0 Update to Congressional Notifications - Full Implementation of Advanced Notification of Awards (ANA) System Policy Flash 2014-10 Update to Congressional Notifications - Full ...

  6. Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    132014 10:58 AM Submitted by Anonymous User This message was created by a Microsoft InfoPath form. The form data may be included as an attachment. Freedom of Information Act...

  7. Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9:27 PM Submitted by Anonymous User This message was created by a Microsoft InfoPath form. The form data may be included as an attachment. Freedom of Information Act (FOIA)...

  8. Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forms and Checklists Download or view forms and checklists used at WNR. IWD Forms 2100 - Integrated Work Document (IWD) Part 1, Activity Specific Information (word version) 2100_con - Integrated Work Document (IWD) Part 1, Activity Specific Information Continuation Page (word version) 2101 - Integrated Work Document (IWD) Part 2, FOD Requirements and Approval for Entry and Area Hazards and Controls, Non-Tenant Activity Form (word version) 2102 - Integrated Work Document (IWD) Part 2, FOD

  9. Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Privacy Act must be signed and, therefore, cannot be submitted : on this form. t Name Richard van Dijk Email , Orga nizati on Mailin g Addre ss city PA State I P Pion e Ex....

  10. Class 1 Permit Modification Notification

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Waste Bureau New Mexico Environment Department 2905 Rodeo Park Drive East, Bu il ding 1 Santa Fe, New Mexico 87505-6303 JUL 0 5 2011 Subject: Notification of a Class 1 Permit...

  11. New Emergency Equipment Notifications 2016

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Notifications 2016 Addition of New Emergency Equipment, Hazardous Waste Facility Permit Number: NM4890139088-TSDF Todd A. Shrader/CBFO and Philip J. Breidenbach/NWP dated January 8, 2016 Underground Fire Suppression Vehicles

  12. Class 1 Permit Modification Notification

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Waste Bureau New Mexico Environment Department 2905 Rodeo Park Drive East, Bu il ding 1 Santa Fe, New Mexico 87505-6303 JUL 0 5 2011 Subject: Notification of a Class 1 Permit Modification to the Hazardous Waste Facility Permit, Permit Number: NM4890139088-TSDF Dear Mr. Kieling : Enclosed is a Class 1 Permit Modification Notification 1 0: * Update Emergency Coordinator list We certify under penalty of law that this document and the enclosure were prepared under our direction or supervision in

  13. Pre-Construction Notification | Open Energy Information

    Open Energy Info (EERE)

    Construction Notification Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Pre-Construction NotificationLegal Published NA Year...

  14. WTO Subsidy Notifications Database | Open Energy Information

    Open Energy Info (EERE)

    Dataset Website: www.globalsubsidies.orgprivatemodulesknowledgeboxexternalindex.ph WTO Subsidy Notifications Database Screenshot References: WTO Subsidy Database1...

  15. Obligations Notification Cycle and New Obligations Presentation

    National Nuclear Security Administration (NNSA)

    Obligations Notification Cycle and Obligations Notification Cycle and New Obligations New Obligations Bill Benton, DOE/SO-62 Pat Tana, NRC/NSIR Michelle Romano, NAC/NMMSS Obligations Accounting Implementation Workshop Obligations Accounting Implementation Workshop January 13, 2004 January 13, 2004 Crowne Crowne Plaza Plaza Ravinia Ravinia Atlanta, Georgia Atlanta, Georgia Notifications Notifications * There are issues! - Timeliness - Information (or lack thereof) - Other? * DOE Facilities - Bill

  16. Direct memory access transfer completion notification

    DOE Patents [OSTI]

    Archer, Charles J.; Blocksome, Michael A.; Parker, Jeffrey J.

    2010-08-17

    Methods, apparatus, and products are disclosed for DMA transfer completion notification that include: inserting, by an origin DMA engine on an origin compute node in an injection FIFO buffer, a data descriptor for an application message to be transferred to a target compute node on behalf of an application on the origin compute node; inserting, by the origin DMA engine, a completion notification descriptor in the injection FIFO buffer after the data descriptor for the message, the completion notification descriptor specifying an address of a completion notification field in application storage for the application; transferring, by the origin DMA engine to the target compute node, the message in dependence upon the data descriptor; and notifying, by the origin DMA engine, the application that the transfer of the message is complete, including performing a local direct put operation to store predesignated notification data at the address of the completion notification field.

  17. Direct memory access transfer completion notification

    DOE Patents [OSTI]

    Archer, Charles J.; Blocksome, Michael A.; Parker, Jeffrey J.

    2011-02-15

    DMA transfer completion notification includes: inserting, by an origin DMA engine on an origin node in an injection first-in-first-out (`FIFO`) buffer, a data descriptor for an application message to be transferred to a target node on behalf of an application on the origin node; inserting, by the origin DMA engine, a completion notification descriptor in the injection FIFO buffer after the data descriptor for the message, the completion notification descriptor specifying a packet header for a completion notification packet; transferring, by the origin DMA engine to the target node, the message in dependence upon the data descriptor; sending, by the origin DMA engine, the completion notification packet to a local reception FIFO buffer using a local memory FIFO transfer operation; and notifying, by the origin DMA engine, the application that transfer of the message is complete in response to receiving the completion notification packet in the local reception FIFO buffer.

  18. POLICY FLASH 2014-10 UPDATE TO CONGRESSIONAL NOTIFICATION_ FULL...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0 UPDATE TO CONGRESSIONAL NOTIFICATION FULL IMPLEMENTATION OF ANA SYSTEM POLICY FLASH 2014-10 UPDATE TO CONGRESSIONAL NOTIFICATION FULL IMPLEMENTATION OF ANA SYSTEM An updated ...

  19. Microsoft Word - Attachment 3 Recovery Act notification | Department...

    Energy Savers [EERE]

    Microsoft Word - Attachment 3 Recovery Act notification Microsoft Word - Attachment 3 Recovery Act notification More Documents & Publications Microsoft Word - Attachment 3 Recovery...

  20. Update on Tribal Activities - Advance Notification, Policy Statement...

    Office of Environmental Management (EM)

    Activities - Advance Notification, Policy Statement, and Outreach Update on Tribal Activities - Advance Notification, Policy Statement, and Outreach PDF icon Update on Tribal...

  1. Notification of Regulated Waste Activity | Open Energy Information

    Open Energy Info (EERE)

    Notification of Regulated Waste Activity Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Notification of Regulated Waste...

  2. Notification of General User Proposal and Approved Program Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Notification of General User Proposal and Approved Program Results Notification of General User Proposal and Approved Program Results Print by Sue Bailey, User Services Group...

  3. NOTIFICATION AND FEDERAL EMPLOYEE ANTIDISCRIMINATION AND RETALIATION...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ACT OF 2002 Public Law PDF icon NOTIFICATION AND FEDERAL EMPLOYEE ANTIDISCRIMINATION AND RETALIATION ACT OF 2002 More Documents & Publications ENERGY POLICY ACT OF 2005 ...

  4. Advanced Notification of Awards (ANA) User Guide

    Broader source: Energy.gov (indexed) [DOE]

    Please provide extensive detail as to why the document is being rejected. Click the red OK Button to confirm the rejection. Note: When rejecting a notification, email...

  5. Advanced Notification of Awards (ANA) User Guide

    Energy Savers [EERE]

    a pop-up window with instructions appears as displayed below. The user selects the "OK" button to exit the instructions. Approving Notifications When there is pending award...

  6. DOE CAST ALL EMPLOYEE NOTIFICATION

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NOTIFICATION AND FEDERAL EMPLOYEE ANTIDISCRIMINATION AND RETALIATION ACT (No FEAR Act) On March 3, 2011, Secretary Steven Chu issued a memorandum for all DOE employees, entitled "Equal Employment Opportunity and Diversity Policy Statement". In his policy statement, Secretary Chu expressed his commitment to equal employment opportunity and diversity, and his support of the rights of employees to participate in the EEO process without fear of reprisal. The Secretary's statement accords

  7. Notification of Investigation at BWCS

    Energy Savers [EERE]

    July 17, 2015 Mr. John D. Woolery President and Project Manager Portsmouth and Paducah DUF 6 Project BWXT Conversion Services, LLC 1020 Monarch Street Suite 300 Lexington, Kentucky 40513 Dear Mr. Woolery: This letter serves as notification of the Office of Enterprise Assessments' Office of Enforcement's decision to conduct an investigation into the facts and circumstances associated with the potassium hydroxide injury event at the Portsmouth DUF 6 Conversion Plant on March 25, 2015. BWXT

  8. T-645: Microsoft Security Bulletin Advance Notification

    Broader source: Energy.gov [DOE]

    Microsoft provides the Microsoft Security Bulletin Advance Notification Service. This advance notification is intended to help our customers plan for effective deployment of security updates, and includes information about the number of new security updates being released, the software affected, severity levels of vulnerabilities, and information about any detection tools relevant to the updates.

  9. Method of forming a relatively stable slip of silicon metal particles and yttrium containing particles

    DOE Patents [OSTI]

    Dickie, Ray A.; Mangels, John A.

    1984-01-01

    The method concerns forming a relatively stable slip of silicon metal particles and yttrium containing particles. In one embodiment, a casting slip of silicon metal particles is formed in water. Particles of a yttrium containing sintering aid are added to the casting slip. The yttrium containing sintering aid is a compound which has at least some solubility in water to form Y.sup.+3 ions which have a high potential for totally flocculating the silicon metal particles into a semiporous solid. A small amount of a fluoride salt is added to the casting slip which contains the yttrium containing sintering aid. The fluoride salt is one which will produce fluoride anions when dissolved in water. The small amount of the fluoride anions produced are effective to suppress the flocculation of the silicon metal particles by the Y.sup.+3 ions so that all particles remain in suspension in the casting slip and the casting slip has both an increased shelf life and can be used to cast articles having a relatively thick cross-section. The pH of the casting slip is maintained in a range from 7.5 to 9. Preferably, the fluoride salt used is one which is based on a monovalent cation such as sodium or ammonia. The steps of adding the yttrium containing sintering aid and the fluoride salt may be interchanged if desired, and the salt may be added to a solution containing the sintering aid prior to addition of the silicon metal particles.

  10. Business Alert Notification System | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Business Alert Notification System FedBizOpps, FedConnect, and Grants.gov provide e-mail notification services to interested parties who want to receive information about the...

  11. U-078: Microsoft Security Bulletin Advance Notification for January 2012 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 78: Microsoft Security Bulletin Advance Notification for January 2012 U-078: Microsoft Security Bulletin Advance Notification for January 2012 January 10, 2012 - 8:15am Addthis PROBLEM: Microsoft Security Bulletin Advance Notification for January 2012. PLATFORM: Windows Server 2008 R2, Windows 7, Windows Server 2008, Windows Vista, Windows Server 2003, Windows XP ABSTRACT: Microsoft Security Bulletin Advance Notification for January 2012. Microsoft has posted 1 Critical

  12. NOTIFICATION AND FEDERAL EMPLOYEE ANTIDISCRIMINATION AND RETALIATION ACT OF

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2002 | Department of Energy NOTIFICATION AND FEDERAL EMPLOYEE ANTIDISCRIMINATION AND RETALIATION ACT OF 2002 NOTIFICATION AND FEDERAL EMPLOYEE ANTIDISCRIMINATION AND RETALIATION ACT OF 2002 Public Law PDF icon NOTIFICATION AND FEDERAL EMPLOYEE ANTIDISCRIMINATION AND RETALIATION ACT OF 2002 More Documents & Publications ENERGY POLICY ACT OF 2005 Energy Policy Act of 2005 Intelligence Reform and Terrorism Prevention Act - December 17, 2004

  13. Exercise Evaluation Forms

    Office of Environmental Management (EM)

    Name OBJECTIVE 7: ALERT AND NOTIFICATION OF THE PUBLIC Demonstrate the ability to signal an alert and to provide emergency notifications containing information and...

  14. Notification Form: Combined Notification of Hazardous Waste Activity. QY-100-102-1.01.

    Office of Legacy Management (LM)

  15. Direct memory access transfer completion notification

    DOE Patents [OSTI]

    Archer, Charles J. , Blocksome; Michael A. , Parker; Jeffrey J.

    2011-02-15

    Methods, systems, and products are disclosed for DMA transfer completion notification that include: inserting, by an origin DMA on an origin node in an origin injection FIFO, a data descriptor for an application message; inserting, by the origin DMA, a reflection descriptor in the origin injection FIFO, the reflection descriptor specifying a remote get operation for injecting a completion notification descriptor in a reflection injection FIFO on a reflection node; transferring, by the origin DMA to a target node, the message in dependence upon the data descriptor; in response to completing the message transfer, transferring, by the origin DMA to the reflection node, the completion notification descriptor in dependence upon the reflection descriptor; receiving, by the origin DMA from the reflection node, a completion packet; and notifying, by the origin DMA in response to receiving the completion packet, the origin node's processing core that the message transfer is complete.

  16. Transportation considerations related to waste forms and canisters for Defense TRU wastes

    SciTech Connect (OSTI)

    Schneider, K.J.; Andrews, W.B.; Schreiber, A.M.; Rosenthal, L.J.; Odle, C.J.

    1981-09-01

    This report identifies and discusses the considerations imposed by transportation on waste forms and canisters for contact-handled, solid transuranic wastes from the US Department of Energy (DOE) activities. The report reviews (1) the existing raw waste forms and potential immobilized waste forms, (2) the existing and potential future DOE waste canisters and shipping containers, (3) regulations and regulatory trends for transporting commercial transuranic wastes on the ISA, (4) truck and rail carrier requirements and preferences for transporting the wastes, and (5) current and proposed Type B external packagings for transporting wastes.

  17. File:UST Construction Notification Form 0495.pdf | Open Energy...

    Open Energy Info (EERE)

    this file. Metadata This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from...

  18. Proton Form Factors And Related Processes in BaBar by ISR

    SciTech Connect (OSTI)

    Ferroli, R.B.; /Enrico Fermi Ctr., Rome /INFN, Rome

    2007-02-12

    BaBar has measured with unprecedented accuracy e{sup +}e{sup -} {yields} p{bar p} from the threshold up to Q{sub p{bar p}}{sup 2} {approx} 20 GeV{sup 2}/c{sup 4}, finding out an unexpected cross section, with plateaux and drops. In particular it is well established a sharp drop near threshold, where evidence for structures in multihadronic channels has also been found. Other unexpected and spectacular features of the Nucleon form factors are reminded, the behavior of space-like G{sub E}{sup p}/G{sub M}{sup p} and the neutron time-like form factors.

  19. Electrodes including a polyphosphazene cyclomatrix, methods of forming the electrodes, and related electrochemical cells

    DOE Patents [OSTI]

    Gering, Kevin L; Stewart, Frederick F; Wilson, Aaron D; Stone, Mark L

    2014-10-28

    An electrode comprising a polyphosphazene cyclomatrix and particles within pores of the polyphosphazene cyclomatrix. The polyphosphazene cyclomatrix comprises a plurality of phosphazene compounds and a plurality of cross-linkages. Each phosphazene compound of the plurality of phosphazene compounds comprises a plurality of phosphorus-nitrogen units, and at least one pendant group bonded to each phosphorus atom of the plurality of phosphorus-nitrogen units. Each phosphorus-nitrogen unit is bonded to an adjacent phosphorus-nitrogen unit. Each cross-linkage of the plurality of cross-linkages bonds at least one pendant group of one phosphazene compound of the plurality of phosphazene compounds with the at least one pendant group of another phosphazene compound of the plurality of phosphazene compounds. A method of forming a negative electrode and an electrochemical cell are also described.

  20. Notification to Mirant by the Commonwealth of Virginia of Serious

    Energy Savers [EERE]

    Violations of the National Ambient Air Quality Standards for Sulfur Dioxide | Department of Energy Notification to Mirant by the Commonwealth of Virginia of Serious Violations of the National Ambient Air Quality Standards for Sulfur Dioxide Notification to Mirant by the Commonwealth of Virginia of Serious Violations of the National Ambient Air Quality Standards for Sulfur Dioxide Docket No. EO-05-01: Notification to Mirant by the Commonwealth of Virginia of Serious Violations of the National

  1. INFCIRC/207 - Notification to the Agency of Exports and Imports...

    National Nuclear Security Administration (NNSA)

    1974 International Atomic Energy Agency INFORMATION CIRCULAR GENERAL Distr. Original: ENGLISH and RUSSIAN NOTIFICATION TO THE AGENCY OF EXPORTS AND IMPORTS OF NUCLEAR MATERIAL On...

  2. New Mexico Guidelines for Public Notification for Air Quality...

    Open Energy Info (EERE)

    Guidelines for Public Notification for Air Quality Permit Applications Jump to: navigation, search OpenEI Reference LibraryAdd to library General: New Mexico Guidelines for Public...

  3. Notification to Mirant by the Commonwealth of Virginia of Serious...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the National Ambient Air Quality Standards for Sulfur Dioxide Notification to Mirant by the Commonwealth of Virginia of Serious Violations of the National Ambient Air Quality ...

  4. Notification of Investigation Battelle Energy Alliance, LLC

    Energy Savers [EERE]

    7, 2015 Mr. John J. Grossenbacher President and Laboratory Director Battelle Energy Alliance, LLC 2525 North Fremont Avenue Idaho Falls, Idaho 83415-3695 Dear Mr. Grossenbacher: This letter serves as notification of the Office of Enterprise Assessments' Office of Enforcement's decision to conduct an investigation into the facts and circumstances associated with a near miss arc flash event involving three linemen performing preventative maintenance at the Idaho National Laboratory, Central

  5. ALFAL 2010-04- Congressional Notification of Pending Contract or Financial Assistance Actions in Excess of $1 Million

    Broader source: Energy.gov [DOE]

    ALIFAL 20 10-03 implements statutory and non-statutory Congressional notification of pending award of a contract action, announcement of selected applications for negotiation of financial assistance awards, or to award a financial assistance action in excess of $1 million. The ALIFAL implements the General Provision Section 3 11 of the Energy and Water Development and Related Agencies Appropriations Act, 201 0.

  6. Ideal hydrodynamic scaling relations for a stagnated imploding spherical plasma liner formed by an array of merging plasma jets

    SciTech Connect (OSTI)

    Cassibry, J. T.; Stanic, M.; Hsu, S. C.

    2013-03-15

    This work presents scaling relations for the peak thermal pressure and stagnation time (over which peak pressure is sustained) for an imploding spherical plasma liner formed by an array of merging plasma jets. Results were derived from three-dimensional (3D) ideal hydrodynamic simulation results obtained using the smoothed particle hydrodynamics code SPHC. The 3D results were compared to equivalent one-dimensional (1D) simulation results. It is found that peak thermal pressure scales linearly with the number of jets and initial jet density and Mach number, quadratically with initial jet radius and velocity, and inversely with the initial jet length and the square of the chamber wall radius. The stagnation time scales approximately as the initial jet length divided by the initial jet velocity. Differences between the 3D and 1D results are attributed to the inclusion of thermal transport, ionization, and perfect symmetry in the 1D simulations. A subset of the results reported here formed the initial design basis for the Plasma Liner Experiment [S. C. Hsu et al., Phys. Plasmas 19, 123514 (2012)].

  7. Title 40 CFR 355 Emergency Planning and Notification | Open Energy...

    Open Energy Info (EERE)

    Title 40 CFR 355 Emergency Planning and Notification Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Federal RegulationFederal Regulation: Title...

  8. Interim Reporting for Advanced Notifications of Awards (ANA)

    Broader source: Energy.gov [DOE]

    With reference to Policy Flash 2012-44 and the postponement of the ANA system production date of June 1, 2012, the increased dollar thresholds remain in effect for advanced notification of award actions.

  9. Policy Flash 2013-36 Update to Congressional Notifications -...

    Energy Savers [EERE]

    3-36 Update to Congressional Notifications - Acquisition Guide Chapter 5.1 and Guide to Financial Assistance Chapter 2, Section 2.6.1 Policy Flash 2013-36 Update to Congressional...

  10. Permitted Mercury Storage Facility Notifications | Department of Energy

    Energy Savers [EERE]

    Services » Waste Management » Waste Disposition » Long-Term Management and Storage of Elemental Mercury is in the Planning Stages » Permitted Mercury Storage Facility Notifications Permitted Mercury Storage Facility Notifications As provided for and authorized under the MEBA statue, certain options exist for the storage of elemental mercury until DOE is able to open its mercury storage facility. Elemental mercury may be stored at a permitted facility if the owner or operator of the facility

  11. WIPP Installs Underground Personnel Notification and Tracking System

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1, 2016 WIPP Installs Underground Personnel Notification and Tracking System A new underground Wireless Notification and Tracking System (WNTS) has been installed at the Waste Isolation Pilot Plant (WIPP) that allows for two-way communication for both talk and text, audible and flashing alarms and allows personnel to immediately signal the Central Monitoring Room (CMR) in the event of an emergency. It also provides real-time tracking of all personnel entering the WIPP underground. "I'm

  12. Direct memory access transfer completion notification

    DOE Patents [OSTI]

    Chen, Dong; Giampapa, Mark E.; Heidelberger, Philip; Kumar, Sameer; Parker, Jeffrey J.; Steinmacher-Burow, Burkhard D.; Vranas, Pavlos

    2010-07-27

    Methods, compute nodes, and computer program products are provided for direct memory access (`DMA`) transfer completion notification. Embodiments include determining, by an origin DMA engine on an origin compute node, whether a data descriptor for an application message to be sent to a target compute node is currently in an injection first-in-first-out (`FIFO`) buffer in dependence upon a sequence number previously associated with the data descriptor, the total number of descriptors currently in the injection FIFO buffer, and the current sequence number for the newest data descriptor stored in the injection FIFO buffer; and notifying a processor core on the origin DMA engine that the message has been sent if the data descriptor for the message is not currently in the injection FIFO buffer.

  13. I. Notification of Employee Rights Under the National Labor Relations...

    Broader source: Energy.gov (indexed) [DOE]

    to organize and bargain collectively through representatives of the employee's own choosing. Item X--Technical Amendments Editorial changes are made at FAR 1.106, 4.604, and 8.501....

  14. Service Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Service Forms Beamtime Request Form Deposition Request Form Exposure Request Form - pdf Fly Cutting Request Form Hot Embossing Request Form Metrology Request Form

  15. U-278: Microsoft Security Bulletin Advance Notification for October 2012

    Broader source: Energy.gov [DOE]

    Microsoft Security Bulletin Advance Notification for October 2012. Microsoft has posted 1 Critical Bulletins and 6 Important Bulletins. Bulletins with the Maximum Severity Rating and Vulnerability Impact of "Critical" may allow remote execution of code. Microsoft is hosting a webcast to address customer questions on these bulletins on October 10, 2012, at 11:00 AM Pacific Time (US & Canada).

  16. V-130: Microsoft Security Bulletin Advance Notification for April 2013

    Broader source: Energy.gov [DOE]

    Microsoft Security Bulletin Advance Notification for April 2013. Microsoft has posted 2 Critical Bulletins and 7 Important Bulletins. Bulletins with the Maximum Severity Rating and Vulnerability Impact of "Critical" may allow remote execution of code. Microsoft will host a webcast to address customer questions on the security bulletins on April 10, 2013, at 11:00 AM Pacific Time (US & Canada).

  17. U-256: Microsoft Security Bulletin Advance Notification for September 2012

    Broader source: Energy.gov [DOE]

    Microsoft Security Bulletin Advance Notification for September 2012. Microsoft has posted 0 Critical Bulletins and 2 Important Bulletins. Bulletins with the Maximum Severity Rating and Vulnerability Impact of "Critical" may allow remote execution of code. Microsoft is hosting a webcast to address customer questions on these bulletins on September 12, 2012, at 11:00 AM Pacific Time (US & Canada).

  18. U-057: Microsoft Security Bulletin Advance Notification for December 2011

    Broader source: Energy.gov [DOE]

    Microsoft Security Bulletin Advance Notification for December 2011. Microsoft has posted 3 Critical Bulletins and 11 Important bulletins. Bulletins with the Maximum Severity Rating and Vulnerability Impact of "Critical" may allow propagation of Internet worm without user action. Microsoft will host a webcast to address customer questions on the security bulletins on December 14, 2011, at 11:00 AM Pacific Time (US & Canada).

  19. V-154: Microsoft Security Bulletin Advance Notification for May 2013

    Broader source: Energy.gov [DOE]

    Microsoft Security Bulletin Advance Notification for May 2013. Microsoft has posted 2 Critical Bulletins and 8 Important Bulletins. Bulletins with the Maximum Severity Rating and Vulnerability Impact of "Critical" may allow remote execution of code. Microsoft will host a webcast to address customer questions on the security bulletins on May 15, 2013, at 11:00 AM Pacific Time (US & Canada).

  20. V-064: Microsoft Security Bulletin Advance Notification for January 2013

    Broader source: Energy.gov [DOE]

    Microsoft Security Bulletin Advance Notification for January 2013 . Microsoft has posted 2 Critical Bulletins and 5 Important Bulletins. Bulletins with the Maximum Severity Rating and Vulnerability Impact of "Critical" may allow remote execution of code. Microsoft will host a webcast to address customer questions on the security bulletins on January 9, 2013, at 11:00 AM Pacific Time (US & Canada).

  1. U-209: Microsoft Security Bulletin Advance Notification for July 2012

    Broader source: Energy.gov [DOE]

    Microsoft Security Bulletin Advance Notification for July 2012. Microsoft has posted 3 Critical Bulletins and 6 Important Bulletins. Bulletins with the Maximum Severity Rating and Vulnerability Impact of "Critical" may allow remote execution of code. Microsoft is hosting a webcast to address customer questions on these bulletins on July 11, 2012, at 11:00 AM Pacific Time (US & Canada).

  2. U-124: Microsoft Security Bulletin Advance Notification for March 2012

    Broader source: Energy.gov [DOE]

    Microsoft Security Bulletin Advance Notification for March 2012. Microsoft has posted 1 Critical Bulletin, 4 Important bulletins and 1 Moderate bulletin. Bulletins with the Maximum Severity Rating and Vulnerability Impact of "Critical" may allow remote execution of code. Microsoft is hosting a webcast to address customer questions on these bulletins on March 14, 2012, at 11:00 AM Pacific Time (US & Canada).

  3. V-108: Microsoft Security Bulletin Advance Notification for March 2013

    Broader source: Energy.gov [DOE]

    Microsoft Security Bulletin Advance Notification for March 2013. Microsoft has posted 4 Critical Bulletins and 3 Important Bulletins. Bulletins with the Maximum Severity Rating and Vulnerability Impact of "Critical" may allow remote execution of code. Microsoft will host a webcast to address customer questions on the security bulletins on March 13, 2013, at 11:00 AM Pacific Time (US & Canada).

  4. V-175: Microsoft Security Bulletin Advance Notification for June 2013

    Broader source: Energy.gov [DOE]

    Microsoft Security Bulletin Advance Notification for June 2013. Microsoft has posted 1 Critical Bulletin and 4 Important Bulletins. Bulletins with the Maximum Severity Rating and Vulnerability Impact of "Critical" June allow remote execution of code. Microsoft will host a webcast to address customer questions on the security bulletins on June 12, 2013, at 11:00 AM Pacific Time (US & Canada).

  5. V-196: Microsoft Security Bulletin Advance Notification for July 2013

    Broader source: Energy.gov [DOE]

    Microsoft Security Bulletin Advance Notification for July 2013. Microsoft has posted 6 Critical Bulletin and 1 Important Bulletins. Bulletins with the Maximum Severity Rating and Vulnerability Impact of "Critical" July allow remote execution of code. Microsoft will host a webcast to address customer questions on the security bulletins on July 10, 2013, at 11:00 AM Pacific Time (US & Canada).

  6. U-164: Microsoft Security Bulletin Advance Notification for May 2012

    Broader source: Energy.gov [DOE]

    Microsoft Security Bulletin Advance Notification for May 2012. Microsoft has posted 3 Critical Bulletins and 4 Important Bulletins. Bulletins with the Maximum Severity Rating and Vulnerability Impact of "Critical" may allow remote execution of code. Microsoft is hosting a webcast to address customer questions on these bulletins on May 8, 2012, at 11:00 AM Pacific Time (US & Canada).

  7. V-042: Microsoft Security Bulletin Advance Notification for December 2012

    Broader source: Energy.gov [DOE]

    Microsoft Security Bulletin Advance Notification for December 2012. Microsoft has posted 5 Critical Bulletins and 2 Important Bulletins. Bulletins with the Maximum Severity Rating and Vulnerability Impact of "Critical" may allow remote execution of code. Microsoft will host a webcast to address customer questions on the security bulletins on December 12, 2012, at 11:00 AM Pacific Time (US & Canada).

  8. U-103: Microsoft Security Bulletin Advance Notification for February 2012

    Broader source: Energy.gov [DOE]

    Microsoft Security Bulletin Advance Notification for February 2012. Microsoft has posted 6 Critical Bulletins and 5 Important bulletins. Bulletins with the Maximum Severity Rating and Vulnerability Impact of "Critical" may allow remote execution of code. Microsoft is hosting a webcast to address customer questions on these bulletins on February 15, 2012, at 11:00 AM Pacific Time (US & Canada).

  9. V-088: Microsoft Security Bulletin Advance Notification for February 2013

    Broader source: Energy.gov [DOE]

    Microsoft Security Bulletin Advance Notification for February 2013. Microsoft has posted 5 Critical Bulletins and 7 Important Bulletins. Bulletins with the Maximum Severity Rating and Vulnerability Impact of "Critical" may allow remote execution of code. Microsoft will host a webcast to address customer questions on the security bulletins on February 13, 2013, at 11:00 AM Pacific Time (US & Canada).

  10. V-023: Microsoft Security Bulletin Advance Notification for November 2012

    Broader source: Energy.gov [DOE]

    Microsoft Security Bulletin Advance Notification for November 2012. Microsoft has posted 4 Critical Bulletins and 1 Important Bulletins. Bulletins with the Maximum Severity Rating and Vulnerability Impact of "Critical" may allow remote execution of code.Microsoft will host a webcast to address customer questions on the security bulletins on November 14, 2012, at 11:00 AM Pacific Time (US & Canada).

  11. U-189: Microsoft Security Bulletin Advance Notification for June 2012

    Broader source: Energy.gov [DOE]

    Microsoft Security Bulletin Advance Notification for June2012. Microsoft has posted 3 Critical Bulletins and 4 Important Bulletins. Bulletins with the Maximum Severity Rating and Vulnerability Impact of "Critical" may allow remote execution of code. Microsoft is hosting a webcast to address customer questions on these bulletins on May 13, 2012, at 11:00 AM Pacific Time (US & Canada).

  12. U-235: Microsoft Security Bulletin Advance Notification for August 2012

    Broader source: Energy.gov [DOE]

    Microsoft Security Bulletin Advance Notification for August 2012. Microsoft has posted 5 Critical Bulletins and 4 Important Bulletins. Bulletins with the Maximum Severity Rating and Vulnerability Impact of "Critical" may allow remote execution of code. Microsoft is hosting a webcast to address customer questions on these bulletins on August 15, 2012, at 11:00 AM Pacific Time (US & Canada).

  13. OPS 9.7 Notifications 8/24/98 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OPS 9.7 Notifications 82498 The objective of this surveillance is to verify that the ... The activities included in this surveillance help the Facility Representative determine if ...

  14. 30 TAC, part 1, chapter 116, rule 116.131 Public Notification...

    Open Energy Info (EERE)

    Abstract This rule explains the public notification requirements for new source review of air quality control permits in Texas. Published NA Year Signed or Took Effect 1993 Legal...

  15. Notification of General User Proposal and Approved Program Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Services » NEPA Documents » Notices of Availability (NOA) Notices of Availability (NOA) A Notice of Availability (NOA) is a formal notice, published in the Federal Register, that announces the issuance and public availability of a draft or final EIS. The Environmental Protection Agency NOA is the official public notification of an EIS; a DOE NOA is an optional notice used to provide information to the public. If you have any trouble finding a specific document, please contact

  16. Notification of General User Proposal and Approved Program Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Information Notification of General User Proposal and Approved Program Results Print by Sue Bailey, User Services Group Leader The Proposal Study Panel (PSP) met on April 15 to oversee and finalize the scoring of General User Proposals for the 2016-2 July-December operating cycle and to make recommendations to the ALS Scientific Advisory Committee (SAC) on Approved Program applications. Beam time allocations are completed, and users will be notified by May 13 to view the results by logging in to

  17. Advanced Notification of Awards (ANA) User Guide

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... History button on the top right of the form. All historical states of a document can be viewed via the panel that expands out from the top. Simply click on the Pencil Icon ...

  18. JLF Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    JLF Forms JLF Target Fab Request JLF Experiment Worksheet JLF-Experimental Team Registration Form JLF-LLNL Participant Registration Form JLF-External Participant Registration Form JLF-Debriefing Form

  19. Online Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Microfabrication | Safety Online Forms, Guidelines & Policies Questions of How to Get Started? - Click here! User Forms: Beamtime Request Form - pdf CAMD Gas Cylinder Request Form - pdf Compressed Gas Purchase Order - pdf Exposure Request Form - pdf (How To Fill the Exposure Request Form?) Format for Annual User Reports - pdf Microfabrication Project Proposal Form - pdf Synchrotron Project Proposal Form - pdf Registration & Test Application for Facility Access & Radiation Badge - pdf

  20. Evolution of the stellar-to-dark matter relation: Separating star-forming and passive galaxies from z = 1 to 0

    SciTech Connect (OSTI)

    Tinker, Jeremy L.; Leauthaud, Alexie; Bundy, Kevin; George, Matthew R.; Behroozi, Peter; Wechsler, Risa H.; Massey, Richard; Rhodes, Jason

    2013-12-01

    We use measurements of the stellar mass function, galaxy clustering, and galaxy-galaxy lensing within the COSMOS survey to constrain the stellar-to-halo mass relation (SHMR) of star forming and quiescent galaxies over the redshift range z = [0.2, 1.0]. For massive galaxies, M {sub *} ? 10{sup 10.6} M {sub ?}, our results indicate that star-forming galaxies grow proportionately as fast as their dark matter halos while quiescent galaxies are outpaced by dark matter growth. At lower masses, there is minimal difference in the SHMRs, implying that the majority low-mass quiescent galaxies have only recently been quenched of their star formation. Our analysis also affords a breakdown of all COSMOS galaxies into the relative numbers of central and satellite galaxies for both populations. At z = 1, satellite galaxies dominate the red sequence below the knee in the stellar mass function. But the number of quiescent satellites exhibits minimal redshift evolution; all evolution in the red sequence is due to low-mass central galaxies being quenched of their star formation. At M {sub *} ? 10{sup 10} M {sub ?}, the fraction of central galaxies on the red sequence increases by a factor of 10 over our redshift baseline, while the fraction of quenched satellite galaxies at that mass is constant with redshift. We define a 'migration rate' to the red sequence as the time derivative of the passive galaxy abundances. We find that the migration rate of central galaxies to the red sequence increases by nearly an order of magnitude from z = 1 to z = 0. These results imply that the efficiency of quenching star formation for centrals is increasing with cosmic time, while the mechanisms that quench the star formation of satellite galaxies in groups and clusters is losing efficiency.

  1. Notification of Planned 230kV Outage at Potomac River Generating Station |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy The next planned outage on xxxxx high voltage circuit between Palmers Corner Substation and the Potomac River Generating Station is scheduled for Sunday, June 3, 2007 and will begin at 4:00 AM with a scheduled return date of Saturday, June 9, 2007 at 2:00 PM. PDF icon Notification of Planned 230kV Outage at Potomac River Generating Station More Documents & Publications Notification of Planned 230kV Outage at Potomac River Generating Station Notification of Planned

  2. THE INTERSTELLAR MEDIUM IN DISTANT STAR-FORMING GALAXIES: TURBULENT PRESSURE, FRAGMENTATION, AND CLOUD SCALING RELATIONS IN A DENSE GAS DISK AT z = 2.3

    SciTech Connect (OSTI)

    Swinbank, A. M.; Smail, Ian; Papadopoulos, P. P.; Cox, P.; Krips, M.; Neri, R.; Ivison, R. J.; Thomson, A. P.; Richard, J.; Ebeling, H.

    2011-11-20

    We have used the Institut de Radioastronomie Millimetrique (IRAM) Plateau de Bure Interferometer and the Expanded Very Large Array to obtain a high-resolution map of the CO(6-5) and CO(1-0) emission in the lensed, star-forming galaxy SMM J2135-0102 at z = 2.32. The kinematics of the gas are well described by a model of a rotationally supported disk with an inclination-corrected rotation speed, v{sub rot} = 320 {+-} 25 km s{sup -1}, a ratio of rotational-to-dispersion support of v/{sigma} = 3.5 {+-} 0.2, and a dynamical mass of (6.0 {+-} 0.5) Multiplication-Sign 10{sup 10} M{sub Sun} within a radius of 2.5 kpc. The disk has a Toomre parameter, Q = 0.50 {+-} 0.15, suggesting that the gas will rapidly fragment into massive clumps on scales of L{sub J} {approx} 400 pc. We identify star-forming regions on these scales and show that they are {approx}10 Multiplication-Sign denser than those in quiescent environments in local galaxies, and significantly offset from the local molecular cloud scaling relations (Larson's relations). The large offset compared to local molecular cloud line-width-size scaling relations implies that supersonic turbulence should remain dominant on scales {approx}100 Multiplication-Sign smaller than in the kinematically quiescent interstellar medium (ISM) of the Milky Way, while the molecular gas in SMM J2135 is expected to be {approx}50 Multiplication-Sign denser than that in the Milky Way on all scales. This is most likely due to the high external hydrostatic pressure we measure for the ISM, P{sub tot}/k{sub B} {approx} (2 {+-} 1) Multiplication-Sign 10{sup 7} K cm{sup -3}. In such highly turbulent ISM, the subsonic regions of gravitational collapse (and star formation) will be characterized by much higher critical densities, n{sub crit} > = 10{sup 8} cm{sup -3}, a factor {approx}>1000 Multiplication-Sign more than the quiescent ISM of the Milky Way.

  3. DOE Releases Notification of an Industry Day and One-on-One Sessions...

    Energy Savers [EERE]

    and One-on-One Sessions for Savannah River Site Liquid Waste Services DOE Releases Notification of an Industry Day and One-on-One Sessions for Savannah River Site Liquid Waste ...

  4. Guide to good practices for notifications and investigation of abnormal events

    SciTech Connect (OSTI)

    Not Available

    1993-06-01

    This Guide to Good Practices is written to enhance understanding of, and provide direction for, Notifications, Chapter VII, and Investigation of Abnormal Events, Chapter VI, of Department of Energy (DOE) Order 5480.19, ``Conduct of Operations Requirements for DOE Facilities.`` The practices in this guide should be considered when planning or reviewing programs for notifications and investigation of abnormal events. Contractors are advised to adopt procedures that meet the intent of DOE Order 5480.19. ``Notifications`` and ``Investigation of Abnormal Events`` are elements of an effective Conduct of Operations program. The complexity and array of activities performed in DOE facilities dictate the necessity for a coordinated notifications program and a consistent method for investigating abnormal events to promote safe and efficient operations.

  5. Guide to good practices for notifications and investigation of abnormal events

    SciTech Connect (OSTI)

    NONE

    1998-12-01

    This Guide to Good Practices is written to enhance understanding of, and provide direction for, Notifications, Chapter VII, and Investigation of Abnormal Events, Chapter VI, of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. The practices in this guide should be considered when planning or reviewing programs for notifications and investigation of abnormal events. Contractors are advised to adopt procedures that meet the intent of DOE Order 5480.19. Notifications and Investigation of Abnormal Events are elements of an effective Conduct of Operations program. The complexity and array of activities performed in DOE facilities dictate the necessity for a coordinated notifications program and a consistent method for investigating abnormal events to promote safe and efficient operations.

  6. 2013 Electricity Form Proposals

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Form EIA-861, "Annual Electric Power Industry Report" The EIA-861 survey has historically collected retail sales, revenue, and a variety of information related to demand response ...

  7. AL 2014-05FAL  2014-02 Congressional Notifications and Quarterly Reporting Approp. Act, 2014, Div D, Title III, Sec 301

    Broader source: Energy.gov [DOE]

    AL 2014-05/FAL 2014-02 (AL/FAL) implements statutory requirements for Congressional notifications or quarterly reporting to the Appropriations Committees for contract, financial assistance, or other transaction agreement actions in accordance with Energy and Water Development and Related Agencies Appropriations Act, 2014, Division D, Title III, Section 3011 to include related notices for prior fiscal years' Appropriations Acts. A summary of the 2 statutory pre-award/pre-selection notices and the 1 post award quarterly report follows. See the AL/FAL for details to include a decision chart to assist in determining which notice template to use.

  8. ARM - Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Send Forms To assist researchers in the conduct of field campaigns or required administrative procedures (such as Baseline Change Requests), we provide a number of...

  9. Composite media for fluid stream processing, a method of forming the composite media, and a related method of processing a fluid stream

    DOE Patents [OSTI]

    Garn, Troy G; Law, Jack D; Greenhalgh, Mitchell R; Tranter, Rhonda

    2014-04-01

    A composite media including at least one crystalline aluminosilicate material in polyacrylonitrile. A method of forming a composite media is also disclosed. The method comprises dissolving polyacrylonitrile in an organic solvent to form a matrix solution. At least one crystalline aluminosilicate material is combined with the matrix solution to form a composite media solution. The organic solvent present in the composite media solution is diluted. The composite media solution is solidified. In addition, a method of processing a fluid stream is disclosed. The method comprises providing a beads of a composite media comprising at least one crystalline aluminosilicate material dispersed in a polyacrylonitrile matrix. The beads of the composite media are contacted with a fluid stream comprising at least one constituent. The at least one constituent is substantially removed from the fluid stream.

  10. Benefit Forms

    Broader source: Energy.gov [DOE]

    The employment and benefits forms that you will be asked to complete as part of this orientation program can be numerous. Each, however, serves an important purpose in ensuring proper recording of...

  11. EEOC FORM

    National Nuclear Security Administration (NNSA)

    U.S. Department of Energy National Nuclear Security Administration Management Directive-715 Fiscal Year 2012 DOE NNSA February 4, 2013 i National Nuclear Security Administration U.S. Department of Energy ANNUAL EEO PROGRAM STATUS REPORT EEO PLAN TO ATTAIN THE ESSENTIAL ELEMENTS OF A MODEL EEO PROGRAM Table of Contents Page FORM 715-01 Part A Department or Agency Identifying Information......................1 FORM 715-01 Part B Total

  12. Form Approved

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OGE Form 450, 5 CFR Part 2634, Subpart I U.S. Office of Government Ethics (January 2007) (Replaces September 2002 edition) Form Approved OMB NO. 3209-0006 CONFIDENTIAL FINANCIAL DISCLOSURE REPORT Executive Branch Why Must I File? The duties and responsibilities of your position require you to file the Confidential Financial Disclosure Report to avoid involvement in a real or apparent conflict of interest. The purpose of this report is to assist employees and their agencies in avoiding conflicts

  13. Registration Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Registration Form Registration Form Register for the Fall 2015 Tritium Focus Group Meeting sponsored by LANL. Contacts Mike Rogers (505) 665-2513 Email Chandra Savage Marsden (505) 664-0183 Email First Name: Last Name: Job Title: Company/Organization: Address: City, State, Zip Code: Email: Phone Number: Are you a US citizen? Yes No Do you have a DOE Q Clearance? Yes No Will you be giving a presentation? Yes No Maybe Are you interested in attending the classified session? Yes No Maybe Are you

  14. Notification of Planned 230kV Outage at Potomac River Generating Station |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy In accordance with DOE Order No. 202-05-03 Pepco is required to provide notification of any and all 230kV planned outages at Potomac River Generating Station. On Tuesday February 20, 2007 Potomac Electric Power Company (Pepco) will be taking a planned outage on the 23106 high voltage circuit between the Palmer's Corner Substation and the Potomac River Generating Station. PDF icon Notification of Planned 230kV Outage at Potomac River Generating Station More Documents

  15. Notification of Planned 230kV Outage at Potomac River Generating Station |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Order No. 202-07-02: In accordance with DOE Order No. 202-07-02, Pepco is required to provide notification of any and all 230kV planned and unplanned outages at Potomac River Generating Station. PDF icon Notification of Planned 230kV Outage at Potomac River Generating Station More Documents & Publications Re: Potomac River Generating Station Department of Energy, Case No. EO-05-01: Potomac Electric Power Company (PEPCO) evised plan for transmission outages for the

  16. Notification to the Commonwealth of Virginia of Mirant's Plan to Shut Down

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Mirant Potomac River Plant | Department of Energy to the Commonwealth of Virginia of Mirant's Plan to Shut Down the Mirant Potomac River Plant Notification to the Commonwealth of Virginia of Mirant's Plan to Shut Down the Mirant Potomac River Plant Docket No. EO-05-01: Mirant's immediate short-term action plan is to shut down all five units at the power plant no later than midnight tonight, August 24,2005 PDF icon Notification to the Commonwealth of Virginia of Mirant's Plan to Shut Down

  17. The kinase LYK5 is a major chitin receptor in Arabidopsis and forms a chitin-induced complex with related kinase CERK1

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cao, Yangrong; Liang, Yan; Tanaka, Kiwamu; Nguyen, Cuong T.; Jedrzejczak, Robert P.; Joachimiak, Andrzej; Stacey, Gary

    2014-10-23

    Chitin is a fungal microbe-associated molecular pattern recognized in Arabidopsis by a lysin motif receptor kinase (LYK), AtCERK1. Previous research suggested that AtCERK1 is the major chitin receptor and mediates chitin-induced signaling through homodimerization and phosphorylation. However, the reported chitin binding affinity of AtCERK1 is quite low, suggesting another receptor with high chitin binding affinity might be present. Here, we propose that AtLYK5 is the primary chitin receptor in Arabidopsis. Mutations in AtLYK5 resulted in a significant reduction in chitin response. AtLYK5 shares overlapping function with AtLYK4 and, therefore, Atlyk4/Atlyk5-2 double mutants show a complete loss of chitin response. AtLYK5more » interacts with AtCERK1 in a chitin-dependent manner. Chitin binding to AtLYK5 is indispensable for chitin-induced AtCERK1 phosphorylation. AtLYK5 binds chitin at a much higher affinity than AtCERK1. The data suggest that AtLYK5 is the primary receptor for chitin, forming a chitin inducible complex with AtCERK1 to induce plant immunity.« less

  18. Interaction transfer of silicon atoms forming Co silicide for Co/√(3)×√(3)R30°-Ag/Si(111) and related magnetic properties

    SciTech Connect (OSTI)

    Chang, Cheng-Hsun-Tony; Fu, Tsu-Yi; Tsay, Jyh-Shen

    2015-05-07

    Combined scanning tunneling microscopy, Auger electron spectroscopy, and surface magneto-optic Kerr effect studies were employed to study the microscopic structures and magnetic properties for ultrathin Co/√(3)×√(3)R30°-Ag/Si(111). As the annealing temperature increases, the upward diffusion of Si atoms and formation of Co silicides occurs at temperature above 400 K. Below 600 K, the √(3)×√(3)R30°-Ag/Si(111) surface structure persists. We propose an interaction transferring mechanism of Si atoms across the √(3)×√(3)R30°-Ag layer. The upward transferred Si atoms react with Co atoms to form Co silicide. The step height across the edge of the island, a separation of 0.75 nm from the analysis of the 2 × 2 structure, and the calculations of the normalized Auger signal serve as strong evidences for the formation of CoSi{sub 2} at the interface. The interaction transferring mechanism for Si atoms enhances the possibility of interactions between Co and Si atoms. The smoothness of the surface is advantage for that the easy axis of magnetization for Co/√(3)×√(3)R30°-Ag/Si(111) is in the surface plane. This provides a possible way of growing flat magnetic layers on silicon substrate with controllable silicide formation and shows potential applications in spintronics devices.

  19. The kinase LYK5 is a major chitin receptor in Arabidopsis and forms a chitin-induced complex with related kinase CERK1

    SciTech Connect (OSTI)

    Cao, Yangrong; Liang, Yan; Tanaka, Kiwamu; Nguyen, Cuong T.; Jedrzejczak, Robert P.; Joachimiak, Andrzej; Stacey, Gary

    2014-10-23

    Chitin is a fungal microbe-associated molecular pattern recognized in Arabidopsis by a lysin motif receptor kinase (LYK), AtCERK1. Previous research suggested that AtCERK1 is the major chitin receptor and mediates chitin-induced signaling through homodimerization and phosphorylation. However, the reported chitin binding affinity of AtCERK1 is quite low, suggesting another receptor with high chitin binding affinity might be present. Here, we propose that AtLYK5 is the primary chitin receptor in Arabidopsis. Mutations in AtLYK5 resulted in a significant reduction in chitin response. AtLYK5 shares overlapping function with AtLYK4 and, therefore, Atlyk4/Atlyk5-2 double mutants show a complete loss of chitin response. AtLYK5 interacts with AtCERK1 in a chitin-dependent manner. Chitin binding to AtLYK5 is indispensable for chitin-induced AtCERK1 phosphorylation. AtLYK5 binds chitin at a much higher affinity than AtCERK1. The data suggest that AtLYK5 is the primary receptor for chitin, forming a chitin inducible complex with AtCERK1 to induce plant immunity.

  20. Administrative Forms/Policies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Administrative Forms Microfab Project Proposal Form Exit Form After Hours Request Form

  1. Method for forming materials

    DOE Patents [OSTI]

    Tolle, Charles R.; Clark, Denis E.; Smartt, Herschel B.; Miller, Karen S.

    2009-10-06

    A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

  2. Selection Process and Notification for Small Business Innovation Research and Small Business Technology Transfer Awards

    Broader source: Energy.gov [DOE]

    Once you apply for a U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) Small Business Innovation Research Program (SBIR) grant, the selection process begins, which includes an initial review, technical merit review, discussions, and notifications.

  3. Extension of DOE N 206.5, Response and Notification Procedures for Data Breaches Involving Personally Identifiable Information

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-10-09

    This Notice extends DOE N 206.5, Response and Notification Procedures for Data Breaches Involving Personally Identifiable Information, dated 10-9-07, until 1-9-09.

  4. Section 301(b) Congressional Notification of Multi-year Contract Award Report Revision for Fiscal Year 2013

    Broader source: Energy.gov [DOE]

    With reference to Acquisition Letter (AL) 2012-08 and Financial Assistance Letter (FAL) 2012-02 regarding Section 301(b) Congressional Notification of Multi-year Contract Award, the spreadsheet is...

  5. The FMOS-COSMOS survey of star-forming galaxies at z ∼ 1.6. II. The mass-metallicity relation and the dependence on star formation rate and dust extinction

    SciTech Connect (OSTI)

    Zahid, H. J.; Sanders, D. B.; Chu, J.; Hasinger, G.; Kashino, D.; Silverman, J. D.; Kewley, L. J.; Daddi, E.; Renzini, A.; Rodighiero, G.; Nagao, T.; Arimoto, N.; Kartaltepe, J.; Lilly, S. J.; Carollo, C. M.; Maier, C.; Geller, M. J.; Capak, P.; Ilbert, O.; Kajisawa, M.; Collaboration: COSMOS Team; and others

    2014-09-01

    We investigate the relationships between stellar mass, gas-phase oxygen abundance (metallicity), star formation rate (SFR), and dust content of star-forming galaxies at z ∼ 1.6 using Subaru/FMOS spectroscopy in the COSMOS field. The mass-metallicity (MZ) relation at z ∼ 1.6 is steeper than the relation observed in the local universe. The steeper MZ relation at z ∼ 1.6 is mainly due to evolution in the stellar mass where the MZ relation begins to turnover and flatten. This turnover mass is 1.2 dex larger at z ∼ 1.6. The most massive galaxies at z ∼ 1.6 (∼10{sup 11} M {sub ☉}) are enriched to the level observed in massive galaxies in the local universe. The MZ relation we measure at z ∼ 1.6 supports the suggestion of an empirical upper metallicity limit that does not significantly evolve with redshift. We find an anti-correlation between metallicity and SFR for galaxies at a fixed stellar mass at z ∼ 1.6, which is similar to trends observed in the local universe. We do not find a relation between stellar mass, metallicity, and SFR that is independent of redshift; rather, our data suggest that there is redshift evolution in this relation. We examine the relation between stellar mass, metallicity, and dust extinction, and find that at a fixed stellar mass, dustier galaxies tend to be more metal rich. From examination of the stellar masses, metallicities, SFRs, and dust extinctions, we conclude that stellar mass is most closely related to dust extinction.

  6. APPENDIX A: Forms and Instructions Form Form R93D-44 Form R93D...

    U.S. Energy Information Administration (EIA) Indexed Site

    and Instructions Form Form R93D-44 Form R93D-03 Form R93D-59 Instructions Form RT94-02 Form RT94-04 Form RT94-0 Form RT94-03 Form RT94-05 Form RT94-06 Instructions Form...

  7. Acquisition Letter AL 2011-05_FAL 2011-01 Congressional Notification of Pending Actions (Contract and FA) in excess of $1M

    Broader source: Energy.gov [DOE]

    AL 2011-05/FAL 2011-01 (AL/FAL) implements statutory and non-statutory Congressional notification of pending award of a contract action, announcement of selected applications for negotiation of financial assistance awards, or to award a financial assistance action in excess of $1 million. The AL/FAL implements Title I - General Provision Section 1101(a)(2) of Division B of Full-Year Continuing Appropriations Act, 2011 from the Department of Defense and Full-Year Continuing Appropriations Act, 2011 (Pub.L. 112-10). This statute is a continuation of Section 311 under the Energy and Water Development and Related Agencies Appropriations Act, 2010. The amendment to Head of Contracting Activity delegation to designate signature authority for these notices will be sent out separately.

  8. CDC DOGGR Forms | Open Energy Information

    Open Energy Info (EERE)

    CDC DOGGR FormsLegal Abstract The California Department of Conservation (CDC) Division of Oil, Gas & Geothermal Resources (DOGGR) provides various forms and information related to...

  9. Densified waste form and method for forming

    DOE Patents [OSTI]

    Garino, Terry J.; Nenoff, Tina M.; Sava Gallis, Dorina Florentina

    2015-08-25

    Materials and methods of making densified waste forms for temperature sensitive waste material, such as nuclear waste, formed with low temperature processing using metallic powder that forms the matrix that encapsulates the temperature sensitive waste material. The densified waste form includes a temperature sensitive waste material in a physically densified matrix, the matrix is a compacted metallic powder. The method for forming the densified waste form includes mixing a metallic powder and a temperature sensitive waste material to form a waste form precursor. The waste form precursor is compacted with sufficient pressure to densify the waste precursor and encapsulate the temperature sensitive waste material in a physically densified matrix.

  10. Densified waste form and method for forming

    DOE Patents [OSTI]

    Garino, Terry J.; Nenoff, Tina M.; Sava Gallis, Dorina Florentina

    2016-05-17

    Materials and methods of making densified waste forms for temperature sensitive waste material, such as nuclear waste, formed with low temperature processing using metallic powder that forms the matrix that encapsulates the temperature sensitive waste material. The densified waste form includes a temperature sensitive waste material in a physically densified matrix, the matrix is a compacted metallic powder. The method for forming the densified waste form includes mixing a metallic powder and a temperature sensitive waste material to form a waste form precursor. The waste form precursor is compacted with sufficient pressure to densify the waste precursor and encapsulate the temperature sensitive waste material in a physically densified matrix.

  11. Forms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Forms Forms Computer Keyboard Keyboard DOE Forms DOE's forms are developed within the Department and approved by the DOE Forms Manager. The forms provided (below) are designed to serve the needs of two (or more) DOE Headquarters or field organizations. (You must have Adobe Acrobat(R) Reader to view and print the below files. Fillable forms are identified by the "fillable" icon, and require the full version of Adobe Acrobat software.) Forms by Subject Forms by Number Management &

  12. Fermilab | Tevatron | Guest Book | Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Guest Book - Form Share your Tevatron-related memories, comments and stories by using our submission form below: Submitted comments are restricted to 200 words and comments will be moderated for inappropriate content. Name: Institution: Email: Memory, comment or story: Words remaining: 200 Submit

  13. Congressional Notification of Pending Contract or Financial Assistance Actions in excess of $1 Million – Update Congressional Addressees

    Broader source: Energy.gov [DOE]

    With reference to the Section 311 Congressional Notice in Acquisition Letter/Financial Acquisition Letter (AL/FAL) 2010- 04 Congressional Notification of Pending Contract or Financial Assistance Actions in excess of $1 Million, use the attached February 10, 2011 versions when preparing a notice. These versions have the current Congressional Members.

  14. Science Brief Submission Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science Brief Submission Form Science Brief Submission Form Print Tuesday, 01 May 2007 00:00 Loading... < Prev

  15. Form OE-417

    U.S. Energy Information Administration (EIA) Indexed Site

    Electricity Delivery and Energy Reliability Form OE-417 ELECTRIC EMERGENCY INCIDENT AND DISTURBANCE REPORT Form Approved OMB No. 1901-0288 Approval Expires 03312018 Burden Per...

  16. Page 8, Benefit Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Benefits Registration Form - 853 Kb - Allows an employee to enroll or waive health insurance coverage. SF-2817 - Life Insurance Election Form (Federal Employee Group Life...

  17. Form:SampleForm | Open Energy Information

    Open Energy Info (EERE)

    SampleForm Jump to: navigation, search Input the name of a Test Page below. If the resource already exists, you will be able to edit its information. AddEdit a Test Page The text...

  18. CSLB ROW Forms | Open Energy Information

    Open Energy Info (EERE)

    various forms and information related to surface Rights of Way on or across state trust lands. Published NA Year Signed or Took Effect 2014 Legal Citation CSLB ROW Forms DOI...

  19. Forms | Department of Energy

    Energy Savers [EERE]

    Forming the Future Forming the Future This feature article from the April 2014 edition of the Fabricating and Forming Journal (FFJournal) describes how Ford Motor Co.'s sheet metal freeforming technology accelerates prototyping, taking stamping tool costs and lead time out of the equation. Reprinted with permission of FFJournal PDF icon Forming the Future, FFJournal (April 2014) More Documents & Publications RAPID FREEFORM SHEET METAL FORMING: TECHNOLOGY DEVELOPMENT AND SYSTEM VERIFICATION

  20. Congressional Notification of Pending Contract or Financial Assistance Actions In excess of $1 Million under the Continuing Resolution

    Broader source: Energy.gov [DOE]

    Section 1101 Title I - General Provisions of Division B - Full-Year Continuing Appropriations Act, 2011 from the Department of Defense and Full-Year Continuing Appropriations Act, 2011, Public Law No. 112-10, makes such appropriations available for continuing projects or activities. Therefore, until the Acquisition Letter/Financial Acquisition Letter (AL/FAL) 2010-04 Congressional Notification of Pending Contract or Financial Assistance Actions in excess of $1 Million is updated, continue to follow this AL/FAL and use the February 2011 versions of the notices. Please remember that three full business days, as defined at Section B of AL 2010-04, are required for the Congressional notification process.

  1. Congressional Notification of Pending Contract or Financial Assistance Actions in excess of $1 Million under the Continuing Resolution

    Broader source: Energy.gov [DOE]

    Section 101 of the Continuing Appropriations Act, 2001, Public Law No. 111-242, makes such appropriations available for continuing projects or activities. Therefore, the Section 311 Congressional Notice of requirements will continue as established in Acquisition Letter/Financial Acquisition Letter (AL/FAL) 2010-04 Congressional Notification of Pending Contract or Financial Assistance Actions in excess of $1 Million. Continue to use the August 2010 versions of the notices.

  2. ProForm | Open Energy Information

    Open Energy Info (EERE)

    Spreadsheet ComplexityEase of Use: Simple Website: poet.lbl.govProform Cost: Free References: ProForm1 Related Tools General Equilibrium Modeling Package (GEMPACK)...

  3. Form OE-417

    U.S. Energy Information Administration (EIA) Indexed Site

    | U.S. Department of Energy Electricity Delivery and Energy Reliability Form OE-417|ELECTRIC EMERGENCY INCIDENT AND DISTURBANCE REPORT|Form Approved OMB No. 1901-0288 Approval...

  4. FOIA Request Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOEID Home > FOIA > FOIA Request Form U.S. Department of Energy Idaho (DOE-ID) Operations Office Electronic FOIA Request Form* To make an Electronic FOIA (E-FOIA) request, please...

  5. 2015 Electricity Form Proposals

    Gasoline and Diesel Fuel Update (EIA)

    (Photovoltaic) Survey Forms November 19, 2015 In early 2016 the U.S. Energy Information ... Details will be provided closer to that date. Proposed changes as of December 2015 Forms ...

  6. Forms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Forms Forms Engraving To request engraving services submit form DOE F 4250.2 (pdf), Requisition for Supplies Equipment, or Service. Go to Engraving information web page. Staffed Copy Center - Graphics - Photography - Printing To request various services and products from the Printing, Graphics and Photography offices, submit form HQ F 1420.7 (pdf), Request for Print Media Services. Go to Staffed Copy Center web page. Go to Graphics web page. Go to Photography web page. Go to Printing web page.

  7. OCPR Forms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OCPR Forms Technology Transfer Reporting Form Mediation Survey Form Agreement to Mediate Form Instructions: Fill out the form and e-mail the completed document to Office of ...

  8. Method for forming ammonia

    SciTech Connect (OSTI)

    Kong; Peter C.; Pink, Robert J.; Zuck, Larry D.

    2008-08-19

    A method for forming ammonia is disclosed and which includes the steps of forming a plasma; providing a source of metal particles, and supplying the metal particles to the plasma to form metal nitride particles; and providing a substance, and reacting the metal nitride particles with the substance to produce ammonia, and an oxide byproduct.

  9. Methods of forming steel

    DOE Patents [OSTI]

    Branagan, Daniel J.; Burch, Joseph V.

    2001-01-01

    In one aspect, the invention encompasses a method of forming a steel. A metallic glass is formed and at least a portion of the glass is converted to a crystalline steel material having a nanocrystalline scale grain size. In another aspect, the invention encompasses another method of forming a steel. A molten alloy is formed and cooled the alloy at a rate which forms a metallic glass. The metallic glass is devitrified to convert the glass to a crystalline steel material having a nanocrystalline scale grain size. In yet another aspect, the invention encompasses another method of forming a steel. A first metallic glass steel substrate is provided, and a molten alloy is formed over the first metallic glass steel substrate to heat and devitrify at least some of the underlying metallic glass of the substrate.

  10. Research Input Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    HighlightsSubmit Form Submit a New Research Highlight Sort Highlights Submitter Title Research Area Working Group Submission Date DOE Progress Reports Notable Research Findings for...

  11. Product Information Form

    Broader source: Energy.gov [DOE]

    When planning to present a new product to the EERE Product Governance Team, complete this product information form and email it to ee.communications@ee.doe.gov.

  12. OFFSITE USE FORM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OFFSITE USE FORM Fill form out in triplicate, send original to Property Control, m/s 85A, give a copy to the Gate Guard and keep a copy for your files. This form needs to be updated once a year. Stanford Linear Accelerator Center Authorization Record Form: Stanford University Removal of Government Property from SLAC PO Box 4349 premises for Official Use Elsewhere (*) Date: To: Property Control, m/s 85A From: Name E Mail Address Group and Mail Stop SLAC Extension This is to notify you that I have

  13. Form W-4 (2015

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Form W-4 (2015) The exceptions do not apply to supplemental wages greater than $1,000,000. Nonwage income. If you'have a large amount of nonwage income, such as interest or dividends, consider making estimated tax payments using Form . 1040-ES, Estimated Tax for Individuals. Otherwise, you may owe additional tax. If you have pension or annuity income, see Pub. 505 to find out if you should adjust your withholding on Form W-4 or W-4P. Purpose. Complete Form W-4 so that your employer can withhold

  14. User Financial Account Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    22013 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user ...

  15. Coach Compliance Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Coach Compliance Form My team is participating in theNational Renewable Energy Laboratory's Lithium-Ion Battery Car Competition. I have reviewed the following documents with the...

  16. Procurement Forms | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proposal Form National Environmental Policy Act (NEPA) Checklist NEPA Checklist - Instruction and Preparation NREL Request for ACH Banking Information NREL Request for...

  17. WSDE New Water Right Forms | Open Energy Information

    Open Energy Info (EERE)

    WSDE New Water Right FormsLegal Abstract The Washington State Department of Ecology provides various forms and publications related to new water right processes....

  18. Method of forming nanodielectrics

    DOE Patents [OSTI]

    Tuncer, Enis [Knoxville, TN; Polyzos, Georgios [Oak Ridge, TN

    2014-01-07

    A method of making a nanoparticle filled dielectric material. The method includes mixing nanoparticle precursors with a polymer material and reacting the nanoparticle mixed with the polymer material to form nanoparticles dispersed within the polymer material to form a dielectric composite.

  19. Use Release Instruction form in Site Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    January 31, 2011 Rev 1 Page 1 ACKNOWLEDGMENTS Permission has been received from the American Society of Mechanical Engineers to use and reproduce portions of standards relating to crane operation and safety. The Committee of Wire Rope Producers of the American Iron and Steel Institute grants permission to reproduce or quote their Wire Rope Users Manual and the Wire Rope Sling User's Manual when used as an editorial reference. The Crosby Group, Inc., has granted permission to use information

  20. Montana MPDES General Information Form (MDEQ Form 1) | Open Energy...

    Open Energy Info (EERE)

    (MDEQ Form 1) Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Montana MPDES General Information Form (MDEQ Form 1) Abstract Completion of form allows...

  1. Image forming apparatus

    DOE Patents [OSTI]

    Satoh, Hisao (Hachioji, JP); Haneda, Satoshi (Hachioji, JP); Ikeda, Tadayoshi (Hachioji, JP); Morita, Shizuo (Hachioji, JP); Fukuchi, Masakazu (Hachioji, JP)

    1996-01-01

    In an image forming apparatus having a detachable process cartridge in which an image carrier on which an electrostatic latent image is formed, and a developing unit which develops the electrostatic latent image so that a toner image can be formed, both integrally formed into one unit. There is provided a developer container including a discharge section which can be inserted into a supply opening of the developing unit, and a container in which a predetermined amount of developer is contained, wherein the developer container is provided to the toner supply opening of the developing unit and the developer is supplied into the developing unit housing when a toner stirring screw of the developing unit is rotated.

  2. Congressional Notification of Pending Contract or Financial Assistance Actions in excess of $1 Million under the Continuing Resolution

    Broader source: Energy.gov [DOE]

    Section 103 of the Continuing Appropriations Act, 2012, in the same manner as provided for in Fiscal Year 2011, makes appropriations available for continuing projects or activities. Therefore, the Section 311 Congressional Notice requirements will continue as established in Acquisition Letter/Financial Acquisition Letter (AL/FAL) AL 2011- 05/FAL 2011-01 Congressional Notification of Pending Contract or Financial Assistance Actions in excess of $1 Million. Based on the proposed Fiscal Year 2012 appropriations act, it is anticipated that Section 311 notices will continue. An updated AL/FAL will be issued later. Continue to use the May 2011 versions of the notices.

  3. User Financial Account Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2/20/13 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user facilities and to send samples, dewars, or other equipment between SLAC and your institution. To open or renew your SLAC user financial account, complete and submit this form along with a Purchase Order (PO) from your institution. The PO should be made to SLAC National Accelerator Laboratory for the amount of estimated

  4. User Financial Account Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    10/21/15 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user facilities or to send samples, dewars, or other equipment between SLAC and your institution. To open or renew your SLAC user financial account, complete and submit this form along with a Purchase Order (PO) from your institution. The PO should be made to SLAC National Accelerator Laboratory for the amount of estimated

  5. Compute Reservation Request Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Compute Reservation Request Form Compute Reservation Request Form Users can request a scheduled reservation of machine resources if their jobs have special needs that cannot be accommodated through the regular batch system. A reservation brings some portion of the machine to a specific user or project for an agreed upon duration. Typically this is used for interactive debugging at scale or real time processing linked to some experiment or event. It is not intended to be used to guarantee fast

  6. Statement and Acknowledgement Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Withholding of Funds * Disputes Concerning Labor Standards * Compliance with Construction Wage Rate Requirements and Related Regulations * Construction Wage Rate...

  7. Technology Transfer Reporting Form

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This form is to be completed by the TTO for individual inquiry/case activity during the quarter as required by the Technology Transfer Commercialization Act of 2000. Mouse over definitions and descriptions appear over text/check boxes where appropriate. After completing this form, click on the submit button. *If you have no TTO activity for the quarter, please fill in your name, FY and quarter, lab or facility and check the box "No Quarterly Activity". Initial Ombuds Contact:

  8. Realtime Queue Request Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Realtime Queue Request Form Realtime Queue Request Form Cori now support a realtime queue. Users can request a small number of on-demand nodes if their jobs have special needs that cannot be accommodated through the regular batch system. The real-time queue enables immediate access to a set of nodes, for jobs that are under the realtime wallclock limit (currently 6 hours). Typically this is used for real time processing linked to some experiment or event. It is not intended to be used to

  9. ARM - VAP Suggestion Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Suggestion Form Showcase Data ARM Best Estimate Data Products (ARMBE) This is a collection of data products that represents "best estimates" derived from several instruments and/or VAPs. We are interested in your feedback; please contact us. VAP Update Information on new, existing, and future value-added products for July l-September 30, 2015 is now available. Have a VAP idea? Use this form to let us know. Datastream Status Further details on the status of VAPs being processed or

  10. Forms | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forms Forms Computer Keyboard Keyboard DOE Forms DOE's forms are developed within the Department and approved by the DOE Forms Manager. The forms provided (below) are designed to serve the needs of two (or more) DOE Headquarters or field organizations. (You must have Adobe Acrobat(R) Reader to view and print the below files. Fillable forms are identified by the "fillable" icon, and require the full version of Adobe Acrobat software.) Forms by Subject Forms by Number Management &

  11. NEPA Determination Form

    National Nuclear Security Administration (NNSA)

    ... project design and construction relating to air quality, biological resources, cultural resources, pollution prevention, Resource Conservation and Recovery Act, and water quality. ...

  12. Inelastic Scattering Form Factors

    Energy Science and Technology Software Center (OSTI)

    1992-01-01

    ATHENA-IV computes form factors for inelastic scattering calculations, using single-particle wave functions that are eigenstates of motion in either a Woods-Saxon potential well or a harmonic oscillator well. Two-body forces of Gauss, Coulomb, Yukawa, and a sum of cut-off Yukawa radial dependences are available.

  13. Apparatus for forming targets

    DOE Patents [OSTI]

    Woerner, Robert L.

    1980-01-01

    Apparatus and method for cryoinduced uniform deposition of cryogenic materials, such as deuterium-tritium (DT) mixtures, on the inner surface of hollow spherical members, such as inertially imploded targets. By vaporizing and quickly refreezing cryogenic materials contained within a hollow spherical member, a uniform layer of the materials is formed on the inner surface of the spherical member. Heating of the cryogenic material, located within a non-isothermal compact freezing cell, is accomplished by an electrical heat pulse, whereafter the material is quickly frozen forming a uniform layer on the inner surface of the spherical member. The method is not restricted to producing a frozen layer on only the inner surface of the innermost hollow member, but where multiple concentric hollow spheres are involved, such as in multiple shell targets for lasers, electron beams, etc., layers of cryogenic material may also be formed on the inner surface of intermediate or outer spherical members, thus providing the capability of forming targets having multiple concentric layers or shells of frozen DT.

  14. Method for forming targets

    DOE Patents [OSTI]

    Woerner, Robert L.

    1979-01-01

    Method for cryoinduced uniform deposition of cryogenic materials, such as deuterium-tritium (DT) mixtures, on the inner surface of hollow spherical members, such as inertially imploded targets. By vaporizing and quickly refreezing cryogenic materials contained within a hollow spherical member, a uniform layer of the materials is formed on the inner surface of the spherical member. Heating of the cryogenic material, located within a non-isothermal compact freezing cell, is accomplished by an electrical heat pulse, whereafter the material is quickly frozen forming a uniform layer on the inner surface of the spherical member. The method is not restricted to producing a frozen layer on only the inner surface of the innermost hollow member, but where multiple concentric hollow spheres are involved, such as in multiple shell targets for lasers, electron beams, etc., layers of cryogenic material may also be formed on the inner surface of intermediate or outer spherical members, thus providing the capability of forming targets having multiple concentric layers or shells of frozen DT.

  15. Formed photovoltaic module busbars

    SciTech Connect (OSTI)

    Rose, Douglas; Daroczi, Shan; Phu, Thomas

    2015-11-10

    A cell connection piece for a photovoltaic module is disclosed herein. The cell connection piece includes an interconnect bus, a plurality of bus tabs unitarily formed with the interconnect bus, and a terminal bus coupled with the interconnect bus. The plurality of bus tabs extend from the interconnect bus. The terminal bus includes a non-linear portion.

  16. Fermilab Today - Subscription Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Subscription Form Subscribe | Contact Us | Archive | Classifieds | Guidelines | Help Search GO Subscribe to Fermilab Today This page has been moved. You will be automatically redirected to the new page below... http://news.fnal.gov/fermilab-at-work/subscribe-to-our-newsletter/ Last modified 12/14/2009 email Fermilab

  17. Forms & Documents | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forms & Documents Incremental Budget Request Form FY 2015 Field Work Proposal (FWP) LDRD Budget Template Instructions for LDRD Budget Template Capital Equipment Validation Form...

  18. Formed HIP Can Processing

    SciTech Connect (OSTI)

    Clarke, Kester Diederik

    2015-07-27

    The intent of this report is to document a procedure used at LANL for HIP bonding aluminum cladding to U-10Mo fuel foils using a formed HIP can for the Domestic Reactor Conversion program in the NNSA Office of Material, Management and Minimization, and provide some details that may not have been published elsewhere. The HIP process is based on the procedures that have been used to develop the formed HIP can process, including the baseline process developed at Idaho National Laboratory (INL). The HIP bonding cladding process development is summarized in the listed references. Further iterations with Babcock & Wilcox (B&W) to refine the process to meet production and facility requirements is expected.

  19. NEPA Determination Form

    National Nuclear Security Administration (NNSA)

    LA NEPA COMPLIANCE DETERMINATION FORM PRID - 09P-0059 V2 Page 1 of 8 Project/Activity Title: TA-3 Substation Replacement Project PRID: 09P-0059 V2 Date: February 16, 2016 Purpose: The proposed demolition and replacement of the Los Alamos National Laboratory's (LANL) Technical Area (TA)-3 electrical power substation is needed to provide reliable and efficient electrical distribution systems with sufficient electrical capacity to support the national security missions. The electrical distribution

  20. UPF-Related Forms | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    UPF NNSA projects win Secretary's Achievement Awards for cost savings and efficiency NNSA was presented with two Department of Energy Secretary's Achievement Awards at a ceremony in Arlington, Va., on Wednesday. The awards, presented by Deputy Secretary of Energy Elizabeth Sherwood-Randall, commend NNSA on delivering the Y-12 Nuclear Facility Risk Reduction Project $5.7... Uranium Processing Facility Site Readiness Subproject Completed on Time and Under Budget WASHINGTON, D.C.--The Uranium

  1. DOCUMENT RELEASE FORM C

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RELEASE FORM C (1) Document Number: RPP-RPT-431 74 (2) Revision Number: (3) Effective Date: 9/30/2009 (4) Document Type: El Digital Image El Hard copy (a) Number of pages (including the DRF) or 107 E PDF E] Video number of digital images (5) Release Type 0 New El Cancel El Page Change El complete Revision (6) Document Title: 2009 Auto-TOR for Tank 241 -T-204 (7) Change/Release Initial Issuance Description: (8) Change Initial Issuance Justification: (9) Associated (a) Structure Location: (c)

  2. GlassForm

    Energy Science and Technology Software Center (OSTI)

    2011-09-16

    GlassForm is a software tool for generating preliminary waste glass formulas for a given waste stream. The software is useful because it reduces the number of verification melts required to develop a suitable additive composition. The software includes property models that calculate glass properties of interest from the chemical composition of the waste glass. The software includes property models for glass viscosity, electrical conductivity, glass transition temperature, and leach resistance as measured by the 7-daymore » product consistency test (PCT).« less

  3. Forming the Future

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - - - - Automotive BY NICK WRIGHT, EXECUTIVE EDITOR A computer program generates a tool path for the robots based on a CAD design, turning 2 D sheet metal into a 3 D part. A blue grease is applied before the sheet is held into place with De sta co clamps. The grease protects the metal's surface finish during forming. Styluses above and below the sheet manipulate the metal into shape. FFJournal ® April 2014 As seen in the April 2014 issue of ® A bout 10 miles west of down- town Detroit sprawls

  4. Standard Form 120

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stan Calvert About Us Stan Calvert - Wind Systems Integration Team Lead, Wind & Water Power Program Stan Calvert is the Wind Systems Integration Team Lead for the Wind and Water Power Program. Most Recent Today's Forecast: Improved Wind Predictions July 20

    1 OF STANDARD FORM 120# REV. APRIL 1957 GEN. SERV. ADMIN. FPMR (41 CFR) 101-43.311 PROPERTY REPORT OF EXCESS PERSONAL 1. REPORT NO. 2. DATE MAILED 3. TOTAL COST 4. TYPE (Check one only of  a. ORIGINAL  c. PARTIAL W/D (Also

  5. Bipolar pulse forming line

    DOE Patents [OSTI]

    Rhodes, Mark A.

    2008-10-21

    A bipolar pulse forming transmission line module for linear induction accelerators having first, second, third, fourth, and fifth planar conductors which form an interleaved stack with dielectric layers between the conductors. Each conductor has a first end, and a second end adjacent an acceleration axis. The first and second planar conductors are connected to each other at the second ends, the fourth and fifth planar conductors are connected to each other at the second ends, and the first and fifth planar conductors are connected to each other at the first ends via a shorting plate adjacent the first ends. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short a high voltage from the first end of the third planar conductor to the first end of the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  6. Nucleon Electromagnetic Form Factors

    SciTech Connect (OSTI)

    Marc Vanderhaeghen; Charles Perdrisat; Vina Punjabi

    2007-10-01

    There has been much activity in the measurement of the elastic electromagnetic proton and neutron form factors in the last decade, and the quality of the data has greatly improved by performing double polarization experiments, in comparison with previous unpolarized data. Here we review the experimental data base in view of the new results for the proton, and neutron, obtained at JLab, MAMI, and MIT-Bates. The rapid evolution of phenomenological models triggered by these high-precision experiments will be discussed, including the recent progress in the determination of the valence quark generalized parton distributions of the nucleon, as well as the steady rate of improvements made in the lattice QCD calculations.

  7. Fermilab | Fermilab at Work | Web Form | Feedback Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Feedback Form Use the form below to submit a suggestion to senior management. Required fields are marked with an asterisk (*). Suggestion: Name: Email Address: Submit Last modified...

  8. Form 1 | Open Energy Information

    Open Energy Info (EERE)

    Form 1 Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Permit ApplicationPermit Application: Form 1Legal Abstract Form 1: General Information,...

  9. HDOT Forms | Open Energy Information

    Open Energy Info (EERE)

    HDOT Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: HDOT FormsLegal Abstract The State of Hawaii Forms Central webpage...

  10. Method for hot press forming articles

    DOE Patents [OSTI]

    Baker, Robert R.; Hartsock, Dale L.

    1982-01-01

    This disclosure relates to an improved method for achieving the best bond strength and for minimizing distortion and cracking of hot pressed articles. In particular, in a method for hot press forming both an outer facing circumferential surface of and an inner portion of a hub, and of bonding that so-formed outer facing circumferential surface to an inner facing circumferential surface of a pre-formed ring thereby to form an article, the following improvement is made. Normally, in this method, the outside ring is restrained by a restraining sleeve of ring-shaped cross-section having an inside diameter. A die member, used to hot press form the hub, is so-formed as to have an outside diameter sized to engage the inside diameter of the restraining sleeve in a manner permitting relative movement therebetween. The improved method is one in which several pairs of matched restraining sleeve and die member are formed with each matched pair having a predetermined diameter. The predetermined diameter of each matched pair is different from another matched pair by stepped increments. The largest inside diameter of a restraining sleeve is equal to the diameter of the outer facing circumferential surface of the hub. Each pair of the matched restraining sleeve and die member is used to form an article in which an inside hub is bonded to an outside ring. The several samples so-formed are evaluated to determine which sample has the best bond formed between the hub and the ring with the least or no cracking or distortion in the ring portion of the article. Thereafter, the matched restraining sleeve and die member which form the article having the best bonding characteristics and least distortion cracking is then used for repeated formations of articles.

  11. NDEP Forms | Open Energy Information

    Open Energy Info (EERE)

    to library Legal Document- OtherOther: NDEP FormsLegal Abstract The Nevada Division of Environmental Protection (NDEP) provides links various forms, including all necessary...

  12. Radiation Safety Work Control Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Radiation Safety Work Control Form (see instructions on pg-3) Rev. May 2014 Area: Form : Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers...

  13. Form 200 | Open Energy Information

    Open Energy Info (EERE)

    ApplicationPermit Application: Form 200Legal Abstract Form 200: ApplicationReport for Waste Discharge, current through August 14, 2014. Published NA Year Signed or Took Effect...

  14. New Employee Orientation- Forms Checklist

    Broader source: Energy.gov [DOE]

    Listing of the forms to be issued and collected at a new employee's orientation. Please review the checklist to ensure that you bring all of the needed forms.

  15. CERAMIC WASTE FORM DATA PACKAGE

    SciTech Connect (OSTI)

    Amoroso, J.; Marra, J.

    2014-06-13

    The purpose of this data package is to provide information about simulated crystalline waste forms that can be used to select an appropriate composition for a Cold Crucible Induction Melter (CCIM) proof of principle demonstration. Melt processing, viscosity, electrical conductivity, and thermal analysis information was collected to assess the ability of two potential candidate ceramic compositions to be processed in the Idaho National Laboratory (INL) CCIM and to guide processing parameters for the CCIM operation. Given uncertainties in the CCIM capabilities to reach certain temperatures throughout the system, one waste form designated 'Fe-MP' was designed towards enabling processing and another, designated 'CAF-5%TM-MP' was designed towards optimized microstructure. Melt processing studies confirmed both compositions could be poured from a crucible at 1600{degrees}C although the CAF-5%TM-MP composition froze before pouring was complete due to rapid crystallization (upon cooling). X-ray diffraction measurements confirmed the crystalline nature and phase assemblages of the compositions. The kinetics of melting and crystallization appeared to vary significantly between the compositions. Impedance spectroscopy results indicated the electrical conductivity is acceptable with respect to processing in the CCIM. The success of processing either ceramic composition will depend on the thermal profiles throughout the CCIM. In particular, the working temperature of the pour spout relative to the bulk melter which can approach 1700{degrees}C. The Fe-MP composition is recommended to demonstrate proof of principle for crystalline simulated waste forms considering the current configuration of INL's CCIM. If proposed modifications to the CCIM can maintain a nominal temperature of 1600{degrees}C throughout the melter, drain, and pour spout, then the CAF-5%TM-MP composition should be considered for a proof of principle demonstration.

  16. Integrally formed radio frequency quadrupole

    DOE Patents [OSTI]

    Abbott, Steven R.

    1989-01-01

    An improved radio frequency quadrupole (10) is provided having an elongate housing (11) with an elongate central axis (12) and top, bottom and two side walls (13a-d) symmetrically disposed about the axis, and vanes (14a-d) formed integrally with the walls (13a-d), the vanes (14a-d) each having a cross-section at right angles to the central axis (12) which tapers inwardly toward the axis to form electrode tips (15a-d) spaced from each other by predetermined distances. Each of the four walls (13a-d), and the vanes (14a-d) integral therewith, is a separate structural element having a central lengthwise plane (16) passing through the tip of the vane, the walls (13a-d) having flat mounting surfaces (17, 18) at right angles to and parallel to the control plane (16), respectively, which are butted together to position the walls and vane tips relative to each other.

  17. STEP Utility Data Release Form

    Broader source: Energy.gov [DOE]

    STEP Utility Data Release Form, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  18. WSDNR Rights-of-Way Forms | Open Energy Information

    Open Energy Info (EERE)

    (WSDNR) provides various links to forms and information related to access across state trust lands in the form of Rights-of-Way. Published NA Year Signed or Took Effect 2014...

  19. Benefits Forms & Required Notices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Benefits Forms & Required Notices Benefits Forms & Required Notices A comprehensive benefits package with plan options for health care and retirement to take care of our employees today and tomorrow. Contacts Benefits Office (505) 667-1806 Email Benefits Forms & Required Notices Forms Benefits Enrollment Form, 1751a (pdf) Declaration of Domestic Partnership, 1925a (pdf) Declaration of Legal Ward as Eligible Dependent, 3028 (pdf) Declaration that Enrolled Dependent Meets IRS

  20. ADNR DO&G Forms | Open Energy Information

    Open Energy Info (EERE)

    Abstract The Alaska Department of Natural Resources (ADNR) Division of Oil and Gas (DO&G) provides various forms and information related to geothermal resource...

  1. SSRL Computer Account Request Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SSRL/LCLS Computer Account Request Form August 2009 Fill in this form and sign the security statement mentioned at the bottom of this page to obtain an account. Your Name: __________________________________________________________ Institution: ___________________________________________________________ Mailing Address: ______________________________________________________ Email Address: _______________________________________________________ Telephone:

  2. Paperclips Etc. Special Order Form

    Broader source: Energy.gov (indexed) [DOE]

    PSS-02.2 (March 7, 2011) Replaces PSS-02.1 PAPERCLIPS Etc. SPECIAL Orders Form This form is used to order supplies that are not readily available in the DOE HQ self-service supply...

  3. Fire Protection Account Request Form

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fire Protection System Account Request Form To obtain a user id and password to access the Fire Protection system, please complete the form, save the file and email it to...

  4. SSRL Computer Account Request Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SSRLLCLS Computer Account Request Form August 2009 Fill in this form and sign the security statement mentioned at the bottom of this page to obtain an account. Your Name:...

  5. HHS SMALL BUSINESS REVIEW FORM

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Form 4220.2 (Revised March 14 2013) Office of Small and Disadvantaged Business Utilization DOE F 4220.2 - Small Business Review Form (03142013) OSDBU Control Number: ...

  6. ESA Forms | Open Energy Information

    Open Energy Info (EERE)

    navigation, search OpenEI Reference LibraryAdd to library Web Site: ESA Forms Abstract Fish and Wildlife Service Fish and Wildlife Permit Application Forms Author U.S. Fish and...

  7. CSLB Forms | Open Energy Information

    Open Energy Info (EERE)

    Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: CSLB FormsLegal Abstract The Colorado State Land Board (CSLB) provides various...

  8. ADOT Forms | Open Energy Information

    Open Energy Info (EERE)

    Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: ADOT FormsLegal Abstract The Arizona Department of Transportation provides...

  9. NDSL Forms | Open Energy Information

    Open Energy Info (EERE)

    NDSL Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: NDSL FormsLegal Abstract The Nevada Division of State Lands provides...

  10. CSLC Forms | Open Energy Information

    Open Energy Info (EERE)

    Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: CSLC FormsLegal Abstract The California State Lands Commission (CSLC) provides...

  11. WSDNR Forms | Open Energy Information

    Open Energy Info (EERE)

    Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: WSDNR FormsLegal Abstract The Washington State Department of Natural Resources...

  12. Document Certification and Transmittal Form

    Broader source: Energy.gov [DOE]

    Use this form to submit a NEPA document to the Office of NEPA Policy and Compliance for website posting.

  13. Prioritization Tool Measurement Input Form

    Broader source: Energy.gov [DOE]

    BTO encourages stakeholders to recommend updates and improvements to the Prioritization Tool by using the below Measure Input Form.

  14. Manifold free multiple sheet superplastic forming

    DOE Patents [OSTI]

    Elmer, John W.; Bridges, Robert L.

    2004-01-13

    Fluid-forming compositions in a container attached to enclosed adjacent sheets are heated to relatively high temperatures to generate fluids (gases) that effect inflation of the sheets. Fluid rates to the enclosed space between the sheets can be regulated by the canal from the container. Inflated articles can be produced by a continuous, rather than batch-type, process.

  15. Manifold free multiple sheet superplastic forming

    DOE Patents [OSTI]

    Elmer, John W.; Bridges, Robert L.

    2001-01-01

    Fluid-forming compositions in a container attached to enclosed adjacent sheets are heated to relatively high temperatures to generate fluids (gases) that effect inflation of the sheets. Fluid rates to the enclosed space between the sheets can be regulated by the canal from the container. Inflated articles can be produced by a continuous, rather than batch-type, process.

  16. Hawaii Well Abandonment Report Form (DLNR Form WAR) | Open Energy...

    Open Energy Info (EERE)

    Notice Form Topic Well Abandonment Report Organization State of Hawaii Commission on Water Resource Management Published Publisher Not Provided, 012008 DOI Not Provided Check...

  17. Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    must exist at the time the request is submitted. Orga nizati Pillsbury Winthrop Shaw Pi on Mailin g 909 Fannin Suite 2000 Addre 55 City Houston Enter description: 1. All...

  18. Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    completed 20 or more years of Reserve or National Guard service but will not receive a pension until age 60.) SF-181 Ethnicity and Race Identification Ethnicity and Race...

  19. Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Former Worker Medical Screening Program Former Worker Medical Screening Program The Former Worker Medical Screening Program (FWP) provides ongoing medical screening examinations, at no cost, to all former DOE Federal, contractor, and subcontractor workers who may be at risk for occupational diseases. The FWP is supported by the U.S. Department of Energy's (DOE) Office of Environment, Health, Safety and Security (EHSS) and reflects our commitment to the health and safety of all DOE workers - past

  20. Complaint Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Complaint Form Complaint Form The Office of Inspector General (OIG) maintains a Hotline to facilitate the reporting of allegations of fraud, waste, abuse, or mismanagement in U.S. Department of Energy (DOE) programs or operations. To submit an allegation to the OIG, complete the form below. Acknowledgement * I acknowledge that I have read the Office of Inspector General Hotline section of the OIG website regarding issues which should be reported to the OIG, complaint processing, anonymity and

  1. Electronic Registration Form - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    About Us Hanford Site Wide Programs Health & Safety Exposition Electronic Registration Form About Us Charging Your Time Committee Members Contact Us Electronic Registration Form Exhibitor and Vendor Information EXPO 2016 Sponsors EXPO Award Criteria How to Get to TRAC Special Events What is EXPO Why Should I Participate in EXPO Electronic Registration Form Email Email Page | Print Print Page |Text Increase Font Size Decrease Font Size * Fields marked with an asterisk are required. Exhibit

  2. Seal for fluid forming tools

    DOE Patents [OSTI]

    Golovashchenko, Sergey Fedorovich; Bonnen, John Joseph Francis

    2012-03-20

    An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

  3. System for forming janus particles

    DOE Patents [OSTI]

    Hong, Liang; Jiang, Shan; Granick, Steve

    2011-01-25

    The invention is a method of forming Janus particles, that includes forming an emulsion that contains initial particles, a first liquid, and a second liquid; solidifying the first liquid to form a solid that contains at least a portion of the initial particles on a surface of the solid; and treating the exposed particle sides with a first surface modifying agent, to form the Janus particles. Each of the initial particles on the surface has an exposed particle side and a blocked particle side.

  4. SNL Information Repository subscription form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2015 SANDIA NATIONAL LABORATORIES HAZARDOUS WASTE INFORMATION REPOSITORY INDEX Subscription form for hard copy notices of updates Name: Address: City: State: Zip: Please check each...

  5. Lobbyist Disclosure Form - Silicon Valley | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Silicon Valley Lobbyist Disclosure Form - Silicon Valley Jonathan Silver, Energy Department executive director loans program, gave Colleen Quinn, Silicon Valley Leadership Group vice president of government relations and public policy, a broad overview of the work done by the LPO, and discussed the possible future of clean energy investment. PDF icon Lobbyist Disclosure Form - Silicon Valley.pdf More Documents & Publications Lobbyist Disclosure Form - AltEn Lobbyist Disclosure Form - First

  6. WSDE Change or Transfer a Water Right Forms | Open Energy Information

    Open Energy Info (EERE)

    or Transfer a Water Right FormsLegal Abstract The Washington State Department of Ecology provides various forms and publications related to the processes for changing or...

  7. Technology Transfer Reporting Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transfer Reporting Form Technology Transfer Reporting Form PDF icon Technology Transfer Reporting Form More Documents & Publications Technology Partnership Ombudsman - Roles,...

  8. Method of forming ceramic bricks

    DOE Patents [OSTI]

    Poeppel, R.B.; Claar, T.D.; Silkowski, P.

    1987-04-22

    A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

  9. Method of forming ceramic bricks

    DOE Patents [OSTI]

    Poeppel, Roger B. (Glen Ellyn, IL); Claar, Terry D. (Newark, DE); Silkowski, Peter (Urbana, IL)

    1988-01-01

    A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

  10. Oregon Modification Application Geothermal Wells Form | Open...

    Open Energy Info (EERE)

    Modification Application Geothermal Wells Form Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Oregon Modification Application Geothermal Wells Form Form...

  11. TEPP - Exercise Evaluation Forms | Department of Energy

    Office of Environmental Management (EM)

    TEPP - Exercise Evaluation Forms TEPP - Exercise Evaluation Forms Hazardous Materials Exercise Evaluation Forms PDF icon Exercise Evaluation Forms More Documents & Publications...

  12. Innovative forming and fabrication technologies : new opportunities.

    SciTech Connect (OSTI)

    Davis, B.; Hryn, J.; Energy Systems; Kingston Process Metallurgy, Inc.

    2008-01-31

    The advent of light metal alloys and advanced materials (polymer, composites, etc.) have brought the possibility of achieving important energy reductions into the full life cycle of these materials, especially in transportation applications. 1 These materials have gained acceptance in the aerospace industry but use of light metal alloys needs to gain wider acceptance in other commercial transportation areas. Among the main reasons for the relatively low use of these materials are the lack of manufacturability, insufficient mechanical properties, and increased material costs due to processing inefficiencies. Considering the enormous potential energy savings associated with the use of light metal alloys and advanced materials in transportation, there is a need to identify R&D opportunities in the fields of materials fabrication and forming aimed at developing materials with high specific mechanical properties combined with energy efficient processes and good manufacturability. This report presents a literature review of the most recent developments in the areas of fabrication and metal forming focusing principally on aluminum alloys. In the first section of the document, the different sheet manufacturing technologies including direct chill (DC) casting and rolling, spray forming, spray rolling, thin slab, and strip casting are reviewed. The second section of the document presents recent research on advanced forming processes. The various forming processes reviewed are: superplastic forming, electromagnetic forming, age forming, warm forming, hydroforming, and incremental forming. Optimization of conventional forming processes is also discussed. Potentially interesting light metal alloys for high structural efficiency including aluminum-scandium, aluminum-lithium, magnesium, titanium, and amorphous metal alloys are also reviewed. This section concludes with a discussion on alloy development for manufacturability. The third section of the document reviews the latest developments in fiber-reinforced composite materials. Emerging curing processes are presented along with a discussion on the possible developments in biocomposite materials. The fourth section presents recent developments in the fabrication of bulk nanomaterials and nanoparticles reinforced materials. Advanced joining technologies are presented in the fifth section. Future research is proposed in the last section.

  13. Microsoft Word - 11-0702 _WRES 11-103 Att._ _Notification of Planned Change to the Permitted Facility_TRUPACT-III_

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0, 2011 New Mexico Environment Department 2905 Rodeo Park Drive East, Building 1 Santa Fe, New Mexico 87505-6303 Subject: Notification of Planned Change to the Permitted Facility to Support TRUPACT-1I1 Dear Mr. Bearzi: The purpose of this letter is to notify you of planned changes to the permitted facility in accordance with the Waste Isolation Pilot Plant Hazardous Waste Facility Permit, Part 1, General Permit Conditions, Section 1.7.11 .1, Reporting Planned Changes. The changes to the

  14. Microsoft Word - 11-0702 _WRES 11-103 Att._ _Notification of Planned Change to the Permitted Facility_TRUPACT-III_

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    January 10, 2011 Mr. James Bearzi, Chief Hazardous Waste Bureau New Mexico Environment Department 2905 Rodeo Park Drive East, Building 1 Santa Fe, New Mexico 87505-6303 Subject: Notification of Planned Change to the Permitted Facility to Support TRUPACT-III Dear Mr. Bearzi: The purpose of this letter is to notify you of planned changes to the permitted facility in accordance with the Waste Isolation Pilot Plant Hazardous Waste Facility Permit, Part 1, General Permit Conditions, Section 1.7.11.1

  15. Update to Congressional Notifications- Acquisition Guide Chapter 5.1 and Guide to Financial Assistance Chapter 2, Section 2.6.1

    Broader source: Energy.gov [DOE]

    Since we previously notified you in Policy Flash 2012-44 for Congressional notifications, there are changes to the process. On March 15, 2013, the automated system will be implemented via a phased approach. As your office transitions to the automated system, reporting for awards and modifications shall be through the automated system. For offices which will not begin using the automated system until later, these offices shall continue to do manual reporting for awards and modifications as described in the guide chapters listed above. The revised guide chapters are attached. The summary of the revisions follow.

  16. Process to form mesostructured films

    DOE Patents [OSTI]

    Brinker, C.J.; Anderson, M.T.; Ganguli, R.; Lu, Y.F.

    1999-01-12

    This invention comprises a method to form a family of supported films with pore size in the approximate range 0.8-20 nm exhibiting highly ordered microstructures and porosity derived from an ordered micellar or liquid-crystalline organic-inorganic precursor structure that forms during film deposition. Optically transparent, 100-500-nm thick films exhibiting a unique range of microstructures and uni-modal pore sizes are formed in seconds in a continuous coating operation. Applications of these films include sensors, membranes, low dielectric constant interlayers, anti-reflective coatings, and optical hosts. 12 figs.

  17. Process to form mesostructured films

    DOE Patents [OSTI]

    Brinker, C. Jeffrey; Anderson, Mark T.; Ganguli, Rahul; Lu, Yunfeng

    1999-01-01

    This invention comprises a method to form a family of supported films film with pore size in the approximate range 0.8-20 nm exhibiting highly ordered microstructures and porosity derived from an ordered micellar or liquid-crystalline organic-inorganic precursor structure that forms during film deposition. Optically transparent, 100-500-nm thick films exhibiting a unique range of microstructures and uni-modal pore sizes are formed in seconds in a continuous coating operation. Applications of these films include sensors, membranes, low dielectric constant interlayers, anti-reflective coatings, and optical hosts.

  18. NMOSE Forms | Open Energy Information

    Open Energy Info (EERE)

    library Legal Document- Permit ApplicationPermit Application: NMOSE FormsLegal Published NA Year Signed or Took Effect 2012 Legal Citation Not provided DOI Not Provided Check for...

  19. Employee In-Processing Forms

    Broader source: Energy.gov [DOE]

    The employment forms found in this section collect important and necessary information about you that will be used to verify your identity and eligibility for Federal Employment, capture all...

  20. Triggered pore-forming agents

    DOE Patents [OSTI]

    Bayley, Hagan; Walker, Barbara J.; Chang, Chung-yu; Niblack, Brett; Panchal, Rekha

    1998-01-01

    An inactive pore-forming agent which is activated to lytic function by a condition such as pH, light, heat, reducing potential, or metal ion concentration, or substance such as a protease, at the surface of a cell.

  1. EIA-412 Form and Instructions

    Gasoline and Diesel Fuel Update (EIA)

    METHOD OF FILING RESPONSE Submit your data electronically over the Internet using our web-based form. Log on to https:elecidc.eia.doe.gov Web-based Survey Information EIA uses ...

  2. FAQs for Survey Forms 914

    Gasoline and Diesel Fuel Update (EIA)

    ... May the oil or gas volumes be submitted separately? Where are oil sales submitted (web or ... If you're using the web form there are comments you can select from the drop down list or ...

  3. Process for forming planarized films

    DOE Patents [OSTI]

    Pang, Stella W.; Horn, Mark W.

    1991-01-01

    A planarization process and apparatus which employs plasma-enhanced chemical vapor deposition (PECVD) to form plarnarization films of dielectric or conductive carbonaceous material on step-like substrates.

  4. Methods of forming hardened surfaces

    DOE Patents [OSTI]

    Branagan, Daniel J. (Iona, ID)

    2004-07-27

    The invention encompasses a method of forming a metallic coating. A metallic glass coating is formed over a metallic substrate. After formation of the coating, at least a portion of the metallic glass can be converted into a crystalline material having a nanocrystalline grain size. The invention also encompasses metallic coatings comprising metallic glass. Additionally, the invention encompasses metallic coatings comprising crystalline metallic material, with at least some of the crystalline metallic material having a nanocrystalline grain size.

  5. Method for forming metal contacts

    DOE Patents [OSTI]

    Reddington, Erik; Sutter, Thomas C; Bu, Lujia; Cannon, Alexandra; Habas, Susan E; Curtis, Calvin J; Miedaner, Alexander; Ginley, David S; Van Hest, Marinus Franciscus Antonius Maria

    2013-09-17

    Methods of forming metal contacts with metal inks in the manufacture of photovoltaic devices are disclosed. The metal inks are selectively deposited on semiconductor coatings by inkjet and aerosol apparatus. The composite is heated to selective temperatures where the metal inks burn through the coating to form an electrical contact with the semiconductor. Metal layers are then deposited on the electrical contacts by light induced or light assisted plating.

  6. Radiation Safety Work Control Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Radiation Safety Work Control Form (see instructions on pg-3) Rev. May 2014 Area: Form #: Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers mitigate the radiological hazards introduced by the proposed work? Yes No (b) Can the closed state of the beam line injection stoppers be assured during the proposed work (ie., work does NOT involve injection stoppers or associated HPS)? Yes No If the answers to both questions are yes, the work can be performed safely

  7. Chevron, GE form Technology Alliance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chevron, GE form Technology Alliance Chevron, GE form Technology Alliance The Chevron GE Technology Alliance will develop and commercialize valuable technologies to solve critical needs for the oil and gas industry. February 3, 2014 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los

  8. Supplier Information Form | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Supplier Information Form PDF icon SB_SIF_form_Rev_0110

  9. LBNL Affiliate Forms - 88-Inch Cyclotron

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Users‎ > ‎ LBNL Affiliate Forms Affiliate Forms (click here to open pdf)

  10. Paperwork Reduction Act Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Form Paperwork Reduction Act Form Collection Discontinuation Form PDF icon Paperwork Reduction Act Form More Documents & Publications OMB83 D Discontinuance Form OMB 83 C Paperwork Reduction Act Submission (OMB 83-I)

  11. Utah Antidegradation Review Form | Open Energy Information

    Open Energy Info (EERE)

    Utah Antidegradation Review Form Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Utah Antidegradation Review Form Form Type ApplicationNotice Form Topic...

  12. C:\Forms\HQ F 1410.8.cdr

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. Department of Energy Notification of Incoming Mail Receipt for Incoming Personal Mail Sender Name: Date Processed: Processed by: (Signature and Date of Person Picking up Mail) Employee Name: Routing Symbol: Room Number: Date Received: HQ F 1410.8 (8-84) HQ F 1410.8 (8-84) Date Contacted: MESSAGE To Sender: Mail must be picked up by: or item will be returned to sender. Part 1 Part 2

  13. Methods of forming boron nitride

    DOE Patents [OSTI]

    Trowbridge, Tammy L; Wertsching, Alan K; Pinhero, Patrick J; Crandall, David L

    2015-03-03

    A method of forming a boron nitride. The method comprises contacting a metal article with a monomeric boron-nitrogen compound and converting the monomeric boron-nitrogen compound to a boron nitride. The boron nitride is formed on the same or a different metal article. The monomeric boron-nitrogen compound is borazine, cycloborazane, trimethylcycloborazane, polyborazylene, B-vinylborazine, poly(B-vinylborazine), or combinations thereof. The monomeric boron-nitrogen compound is polymerized to form the boron nitride by exposure to a temperature greater than approximately 100.degree. C. The boron nitride is amorphous boron nitride, hexagonal boron nitride, rhombohedral boron nitride, turbostratic boron nitride, wurzite boron nitride, combinations thereof, or boron nitride and carbon. A method of conditioning a ballistic weapon and a metal article coated with the monomeric boron-nitrogen compound are also disclosed.

  14. PROCESS OF FORMING POWDERED MATERIAL

    DOE Patents [OSTI]

    Glatter, J.; Schaner, B.E.

    1961-07-14

    A process of forming high-density compacts of a powdered ceramic material is described by agglomerating the powdered ceramic material with a heat- decompossble binder, adding a heat-decompossble lubricant to the agglomerated material, placing a quantity of the material into a die cavity, pressing the material to form a compact, pretreating the compacts in a nonoxidizing atmosphere to remove the binder and lubricant, and sintering the compacts. When this process is used for making nuclear reactor fuel elements, the ceramic material is an oxide powder of a fissionsble material and after forming, the compacts are placed in a cladding tube which is closed at its ends by vapor tight end caps, so that the sintered compacts are held in close contact with each other and with the interior wall of the cladding tube.

  15. Method of forming structural heliostat

    DOE Patents [OSTI]

    Anderson, Alfred J.

    1984-06-26

    In forming a heliostat having a main support structure and pivoting and tilting motors and gears and a mirror module for reflecting solar energy onto a collector, the improvement characterized by a method of forming the mirror module in which the mirror is laid upon a solid rigid supporting bed in one or more sections, with or without focusing; a mirror backing sheet is applied by first applying respective thin layers of silicone grease and, thereafter, progressively rolling application to eliminate air bubbles; followed by affixing of a substrate assembly to the mirror backing sheet to form a mirror module that does not curve because of thermally induced stresses and differential thermal expansion or contraction effects. The silicone grease also serves to dampen fluttering of the mirror and protect the mirror backside against adverse effects of the weather. Also disclosed are specific details of preferred embodiments.

  16. Microsoft Word - FORM46002.doc

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Frequency No. of Copies Addressees 4. Reporting Requirements: MANAGEMENT REPORTING Progress Report Special Status Report SCIENTIFIC/TECHNICAL REPORTING (Reports/Products must be submitted with appropriate DOE F 241. The 241 forms are available at www.osti.gov/elink.) Report/Product Form Final Scientific/Technical Report DOE F 241.3 Conference papers/proceedings* DOE F 241.3 Software/Manual DOE F 241.4 Other (see special instructions) DOE F 241.3 * Scientific and technical conferences only

  17. The Whistleblower Protection Enhancement Act of 2012 and How It Affects Federal Employee Non-Disclosure Policies, Forms, Certificates, Agreements and Acknowledgments

    Broader source: Energy.gov [DOE]

    Acquisition Letter (AL) 2013-08 and Financial Assistance Letter (FAL) 2013-05 provide Contracting Officers with notice of the recently passed, Whistleblower Protection Enhancement Act of 2012 (WPEA), Pub.L. 112-199, and the DOECAST issued in response on April 24, 2013. This AL/FAL informs DOE/NNSA Contracting Officers to update any Non-Disclosure Policies, Forms, Certificates, Agreements, and Acknowledgements (collectively "NDAs") to be used with Federal employees participating in proposal or application evaluations, source selection situations as well as in merit review situations, to conform to the new requirements of this law. It also informs DOE/NNSA Contracting Officers on how to document the notification to Federal employees of the new protections stated in the WPEA if they have signed NDAs without the new statement as required by the WPEA.

  18. HHS SMALL BUSINESS REVIEW FORM

    Energy Savers [EERE]

    Form 4220.2 (Revised January 2014) Office of Small and Disadvantaged Business Utilization Small Business Review OSDBU Control Number: _______________________________________Date Received: ______________________________ A. Project Information 1. Requisition Number: ________________________ Acquisition Instrument Proposed/Contract Type: [ ] Contract No (Mod): ______________________ [ ] Departmental IDIQ No: ___________________ [ ] GSA Schedule: _________________________ [ ] GWAC Contract:

  19. ExRep_form.indd

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Report Submit all experiment reports using this fillable pdf form and upload the saved file using the LANSCE proposals Websi After logging in, click the "Upload Experiment Report" link in the proposal actions view table. Local contact Flight path/instrument Proposal number Title Authors and Affiliations Experiment report

  20. Triggered pore-forming agents

    DOE Patents [OSTI]

    Bayley, H.; Walker, B.J.; Chang, C.Y.; Niblack, B.; Panchal, R.

    1998-07-07

    An inactive pore-forming agent is revealed which is activated to lytic function by a condition such as pH, light, heat, reducing potential, or metal ion concentration, or substance such as a protease, at the surface of a cell. 30 figs.

  1. Technetium Immobilization Forms Literature Survey

    SciTech Connect (OSTI)

    Westsik, Joseph H.; Cantrell, Kirk J.; Serne, R. Jeffrey; Qafoku, Nikolla

    2014-05-01

    Of the many radionuclides and contaminants in the tank wastes stored at the Hanford site, technetium-99 (99Tc) is one of the most challenging to effectively immobilize in a waste form for ultimate disposal. Within the Hanford Tank Waste Treatment and Immobilization Plant (WTP), the Tc will partition between both the high-level waste (HLW) and low-activity waste (LAW) fractions of the tank waste. The HLW fraction will be converted to a glass waste form in the HLW vitrification facility and the LAW fraction will be converted to another glass waste form in the LAW vitrification facility. In both vitrification facilities, the Tc is incorporated into the glass waste form but a significant fraction of the Tc volatilizes at the high glass-melting temperatures and is captured in the off-gas treatment systems at both facilities. The aqueous off-gas condensate solution containing the volatilized Tc is recycled and is added to the LAW glass melter feed. This recycle process is effective in increasing the loading of Tc in the LAW glass but it also disproportionally increases the sulfur and halides in the LAW melter feed which increases both the amount of LAW glass and either the duration of the LAW vitrification mission or the required supplemental LAW treatment capacity.

  2. Spin-forming Project Report

    SciTech Connect (OSTI)

    Switzner, Nathan; Henry, Dick

    2009-03-20

    In a second development order, spin-forming equipment was again evaluated using the test shape, a hemispherical shell. In this second development order, pure vanadium and alloy titanium (Ti-6Al-4V) were spin-formed, as well as additional copper and 21-6-9 stainless. In the first development order the following materials had been spin-formed: copper (alloy C11000 ETP), 6061 aluminum, 304L stainless steel, 21-6-9 stainless steel, and tantalum-2.5% tungsten. Significant challenges included properly adjusting the rotations-per-minute (RPM), cracking at un-beveled edges and laser marks, redressing of notches, surface cracking, non-uniform temperature evolution in the titanium, and cracking of the tailstock. Lessons learned were that 300 RPM worked better than 600 RPM for most materials (at the feed rate of 800 mm/min); beveling the edges to lower the stress reduces edge cracking; notches, laser marks, or edge defects in the preform doom the process to cracking and failure; coolant is required for vanadium spin-forming; increasing the number of passes to nine or more eliminates surface cracking for vanadium; titanium develops a hot zone in front of the rollers; and the tailstock should be redesigned to eliminate the cylindrical stress concentrator in the center.

  3. Process for forming sulfuric acid

    DOE Patents [OSTI]

    Lu, Wen-Tong P.

    1981-01-01

    An improved electrode is disclosed for the anode in a sulfur cycle hydrogen generation process where sulfur dioxie is oxidized to form sulfuric acid at the anode. The active compound in the electrode is palladium, palladium oxide, an alloy of palladium, or a mixture thereof. The active compound may be deposited on a porous, stable, conductive substrate.

  4. Spray forming polymer membranes, coatings and films

    DOE Patents [OSTI]

    McHugh, Kevin M.; Watson, Lloyd D.; McAtee, Richard E.; Ploger, Scott A.

    1993-01-01

    A method of forming a polymer film having controlled physical and chemical characteristics, wherein a plume of nebulized droplets of a polymer or polymer precursor is directed toward a substrate from a converging/diverging nozzle having a throat at which the polymer or a precursor thereof is introduced and an exit from which the nebulized droplets of the polymer or precursor thereof leave entrained in a carrier gas. Relative movement between the nozzle and the substrate is provided to form a polymer film. Physical and chemical characteristics can be controlled by varying the deposition parameters and the gas and liquid chemistries. Semipermeable membranes of polyphosphazene films are disclosed, as are a variety of other polymer systems, both porous and non-porous.

  5. An improved integrally formed radio frequency quadrupole

    DOE Patents [OSTI]

    Abbott, S.R.

    1987-10-05

    An improved radio frequency quadrupole is provided having an elongate housing with an elongate central axis and top, bottom and two side walls symmetrically disposed about the axis, and vanes formed integrally with the walls, the vanes each having a cross-section at right angles to the central axis which tapers inwardly toward the axis to form electrode tips spaced from each other by predetermined distances. Each of the four walls, and the vanes integral therewith, is a separate structural element having a central lengthwise plane passing through the tip of the vane, the walls having flat mounting surfaces at right angles to and parallel to the control plane, respectively, which are butted together to position the walls and vane tips relative to each other. 4 figs.

  6. Spray forming polymer membranes, coatings and films

    DOE Patents [OSTI]

    McHugh, K.M.; Watson, L.D.; McAtee, R.E.; Ploger, S.A.

    1993-10-12

    A method is described for forming a polymer film having controlled physical and chemical characteristics, wherein a plume of nebulized droplets of a polymer or polymer precursor is directed toward a substrate from a converging/diverging nozzle having a throat at which the polymer or a precursor thereof is introduced and an exit from which the nebulized droplets of the polymer or precursor thereof leave entrained in a carrier gas. Relative movement between the nozzle and the substrate is provided to form a polymer film. Physical and chemical characteristics can be controlled by varying the deposition parameters and the gas and liquid chemistries. Semipermeable membranes of polyphosphazene films are disclosed, as are a variety of other polymer systems, both porous and non-porous. 4 figures.

  7. Security Review Processing Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Security Review Processing Form Security Review Processing Form Security Review Process - Please review carefully. Security Acknowledge Form - Complete and return immediately. ...

  8. Course Form | Photosynthetic Antenna Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Course Form Course Form Students may take courses selected by PARCI-CARES, and receive points toward the certificate. By signing this form, the student acknowledges that heshe...

  9. Opinion of Counsel Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Opinion of Counsel Form Opinion of Counsel Form For use with natural gas authorization filings PDF icon Opinion of Counsel Form - Natural Gas Regulation More Documents & ...

  10. Labor Relations

    Broader source: Energy.gov [DOE]

    The National Labor Relations Act prohibits unfair labor practices, including discrimination in employment to discourage (or encourage) membership in a union, and engaging in bad faith collective bargaining.

  11. Related Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Skip navigation links Financial Information Financial Public Processes Asset Management Cost Verification Process Rate Cases BP-18 Rate Case Related Publications Meetings...

  12. Investor Relations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and related services at cost. BPA Overview for Investors - as of September 24, 2015 Credit Ratings Latest Rating Agency Reports Full Reports: Fitch Full Report, March 2014...

  13. Labor Relations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Relations also provides technical assistance to, and coordination of, the Partnership Council and other labor-management forums. Collective Bargaining Agreements BPA AFGE...

  14. Forms | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forms Forms The following are the official Y-12 forms needed by the public. Forms are provided in one or more of three formats: PDF fillable, Word, and HTML. Select a category to...

  15. Method of forming a joint

    DOE Patents [OSTI]

    Butt, Darryl Paul; Cutler, Raymond Ashton; Rynders, Steven Walton; Carolan, Michael Francis

    2006-08-22

    A method of joining at least two sintered bodies to form a composite structure, including providing a first multicomponent metallic oxide having a perovskitic or fluorite crystal structure; providing a second sintered body including a second multicomponent metallic oxide having a crystal structure of the same type as the first; and providing at an interface a joint material containing at least one metal oxide containing at least one metal identically contained in at least one of the first and second multicomponent metallic oxides. The joint material is free of cations of Si, Ge, Sn, Pb, P and Te and has a melting point below the sintering temperatures of both sintered bodies. The joint material is heated to a temperature above the melting point of the metal oxide(s) and below the sintering temperatures of the sintered bodies to form the joint. Structures containing such joints are also disclosed.

  16. Unsplit bipolar pulse forming line

    DOE Patents [OSTI]

    Rhodes, Mark A.

    2011-05-24

    A bipolar pulse forming transmission line module and system for linear induction accelerators having first, second, third, and fourth planar conductors which form a sequentially arranged interleaved stack having opposing first and second ends, with dielectric layers between the conductors. The first and second planar conductors are connected to each other at the first end, and the first and fourth planar conductors are connected to each other at the second end via a shorting plate. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short at the first end a high voltage from the third planar conductor to the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  17. Method of forming calthrate ice

    DOE Patents [OSTI]

    Hino, T.; Gorski, A.J.

    1985-09-30

    A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultransonically so that small crystals are formed in the liquid. Thes small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

  18. Method of forming clathrate ice

    DOE Patents [OSTI]

    Hino, Toshiyuki (Tokyo, JP); Gorski, Anthony J. (Lemont, IL)

    1987-01-01

    A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultrasonically so that small crystals are formed in the liquid. These small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

  19. PURPOSE FORM INSTRUCTIONS Item Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PURPOSE FORM INSTRUCTIONS Item Description 1 Enter inclusive dates of current reporting period. 2 Enter the official contract title. 3 Enter the official contract number. 4 Enter the name and address of each subcontractor. Subcontractors are to be grouped by state. 5 Enter ZIP code plus the 4-digit ZIP code extension. 6 Enter the subcontractor's business type (i.e. Academia, Industry, National Lab, Non-Profit Organization, State, or Other). 7 Enter the subcontractor's business classification

  20. DOE Form 1332.4

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 DOE F 243.2 Records Scheduling Request PDF icon DOE F 243 2 Records Scheduling Request Form (1).pdf More Documents & Publications DOE F 243.5 Electronic Recordkeeping System Questionnaire DOE F 243.5 Electronic Recordkeeping System Questionnaire Records Management Handbook Energy

    5 Electronic Recordkeeping System Questionnaire DOE F 243.5 Electronic Recordkeeping System Questionnaire PDF icon DOE F 243.5 Electronic Recordkeeping System Questionnaire.pdf More Documents &

  1. Chevron, GE form Technology Alliance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chevron, GE form Technology Alliance February 3, 2014 HOUSTON, TX, Feb. 3, 2014-Chevron Energy Technology Company and GE Oil & Gas announced today the creation of the Chevron GE Technology Alliance, which will develop and commercialize valuable technologies to solve critical needs for the oil and gas industry. The Alliance builds upon a current collaboration on flow analysis technology for oil and gas wells. It will leverage research and development from GE's newest Global Research Center,

  2. Rib forming tool for tubing

    DOE Patents [OSTI]

    Rowley, James P.; Lewandowski, Edward F.; Groh, Edward F.

    1976-01-01

    Three cylindrical rollers are rotatably mounted equidistant from the center of a hollow tool head on radii spaced 120.degree. apart. Each roller has a thin flange; the three flanges lie in a single plane to form an internal circumferential rib in a rotating tubular workpiece. The tool head has two complementary parts with two rollers in one part of the head and one roller in the other part; the two parts are joined by a hinge. A second hinge, located so the rollers are between the two hinges, connects one of the parts to a tool bar mounted in a lathe tool holder. The axes of rotation of both hinges and all three rollers are parallel. A hole exposing equal portions of the three roller flanges is located in the center of the tool head. The two hinges permit the tool head to be opened and rotated slightly downward, taking the roller flanges out of the path of the workpiece which is supported on both ends and rotated by the lathe. The parts of the tool head are then closed on the workpiece so that the flanges are applied to the workpiece and form the rib. The tool is then relocated for forming of the next rib.

  3. Relational Blackboard

    Energy Science and Technology Software Center (OSTI)

    2012-09-11

    The Relational Blackboard (RBB) is an extension of the H2 Relational Database to support discrete events and timeseries data. The original motivation for RBB is as a knowledge base for cognitive systems and simulations. It is useful wherever there is a need for persistent storage of timeseries (i.e. samples of a continuous process generating numerical data) and semantic labels for the data. The RBB is an extension to the H2 Relational Database, which is open-source.more » RBB is a set of stored procedures for H2 allowing data to be labeled, queried, and resampled.« less

  4. DOCUMENT RELEASE FORM G5

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOCUMENT RELEASE FORM G5 (1) Document Number: RPP-RPT-431 69 (2) Revision Number: 0 (3) Effective Date: 9/30/2009 (4) Document Type: E] Digital Image l Hard copy (a) Number of pages (including the IDRF) or 125 E PDF ElVideo number of digital images (5) Release Type Z New 0 Cancel El Page Change l complete Revision (6) Document Title: 2009 Auto-TCR for Tank 241 -T-1 11 (7) Change/Release Initial Issuance Description: (8) Change Initial Issuance Justification: (9) Associated (a) Structure

  5. FORMING PROTECTIVE FILMS ON METAL

    DOE Patents [OSTI]

    Gurinsky, D.H.; Kammerer, O.F.; Sadofsky, J.; Weeks, J.R.

    1958-12-16

    Methods are described of inhibiting the corrosion of ferrous metal by contact with heavy liquid metals such as bismuth and gallium at temperatures above 500 icient laborato C generally by bringing nltrogen and either the metal zirconium, hafnium, or titanium into reactlve contact with the ferrous metal to form a thin adherent layer of the nitride of the metal and thereafter maintaining a fractional percentage of the metal absorbed in the heavy liquid metal in contact with the ferrous metal container. The general purpose for uslng such high boiling liquid metals in ferrous contalners would be as heat transfer agents in liquid-metal-fueled nuclear reactors.

  6. FermiCulture Subscription Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The FermiCulture email list is used to send email announcements and reminders about upcoming cultural events at Fermilab (e.g., the Fermilab Arts, Film, and Lecture series). This is a private, announcement-only mail list and will never be used for spamming or discussions. Subscribers receive approximately five emails per month. Use the form below to subscribe to (or unsubscribe from) the FermiCulture list. Email address: Name (First Last): Subscribe to email list Unsubscribe from email list Send

  7. EA-1143: Finding of No Significant Impact

    Broader source: Energy.gov [DOE]

    Environmental Evaluation Notification Form for University of Nebraska Medical Center: Lied Transplant Center

  8. EA-1143: Final Environmental Assessment

    Broader source: Energy.gov [DOE]

    Environmental Evaluation Notification Form for University of Nebraska Medical Center: Lied Transplant Center

  9. Miscellaneous Waste-Form FEPs

    SciTech Connect (OSTI)

    A. Schenker

    2000-12-08

    The US DOE must provide a reasonable assurance that the performance objectives for the Yucca Mountain Project (YMP) potential radioactive-waste repository can be achieved for a 10,000-year post-closure period. The guidance that mandates this direction is under the provisions of 10 CFR Part 63 and the US Department of Energy's ''Revised Interim Guidance Pending Issuance of New US Nuclear Regulatory Commission (NRC) Regulations (Revision 01, July 22, 1999), for Yucca Mountain, Nevada'' (Dyer 1999 and herein referred to as DOE's Interim Guidance). This assurance must be demonstrated in the form of a performance assessment that: (1) identifies the features, events, and processes (FEPs) that might affect the performance of the potential geologic repository; (2) examines the effects of such FEPs on the performance of the potential geologic repository; (3) estimates the expected annual dose to a specified receptor group; and (4) provides the technical basis for inclusion or exclusion of specific FEPs.

  10. Alumina forming iron base superalloy

    DOE Patents [OSTI]

    Yamamoto, Yukinori; Muralidharan, Govindarajan; Brady, Michael P.

    2014-08-26

    An austenitic stainless steel alloy, consists essentially of, in weight percent 2.5 to 4 Al; 25 to 35 Ni; 12 to 19 Cr; at least 1, up to 4 total of at least one element selected from the group consisting of Nb and Ta; 0.5 to 3 Ti; less than 0.5 V; 0.1 to 1 of at least on element selected from the group consisting of Zr and Hf; 0.03 to 0.2 C; 0.005 to 0.1 B; and base Fe. The weight percent Fe is greater than the weight percent Ni. The alloy forms an external continuous scale including alumina, and contains coherent precipitates of .gamma.'-Ni.sub.3Al, and a stable essentially single phase FCC austenitic matrix microstructure. The austenitic matrix is essentially delta-ferrite-free and essentially BCC-phase-free.

  11. CFCNCA Sample Pledge Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CFCNCA Sample Pledge Form CFCNCA Sample Pledge Form This file contains a sample pledge form and instructions for completing a paper donation through the CFC. PDF icon CFCNCA Fall 2012 Sample Pledge Form.pdf More Documents & Publications CFCNCA Sample Pledge Form 2012 CFCNCA Catalog of Caring DOE F 3630.1 Rights and Benefits of Reservists Called to Active Duty

  12. LANS Notification of Investigation

    Energy Savers [EERE]

    LANL Sustainable Design Guide - Appendices LANL Sustainable Design Guide - Appendices Appendices A through H for the LANL Sustainable Design Guide containing best practices, orders, regulations, laws, climate charts and other important information for sustainable design buildings. PDF icon sustainable_guide_appendices.pdf More Documents & Publications Chapter 4: The Building Architectural Design Chapter 2: Whole-Buildling Design Chapter 5: Lighting, HVAC, and Plumbing

  13. Congressional Notifications Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Financial Assistance --- Chapter 2, Section 2.6.1 (May 2015) 4 - Manual Reporting Manual reporting is required for termination actions, regardless of type,...

  14. NSTec Notification of Investigation

    Energy Savers [EERE]

  15. CRYSTALLINE CERAMIC WASTE FORMS: REFERENCE FORMULATION REPORT

    SciTech Connect (OSTI)

    Brinkman, K.; Fox, K.; Marra, J.

    2012-05-15

    The research conducted in this work package is aimed at taking advantage of the long term thermodynamic stability of crystalline ceramics to create more durable waste forms (as compared to high level waste glass) in order to reduce the reliance on engineered and natural barrier systems. Durable ceramic waste forms that incorporate a wide range of radionuclides have the potential to broaden the available disposal options and to lower the storage and disposal costs associated with advanced fuel cycles. Assemblages of several titanate phases have been successfully demonstrated to incorporate radioactive waste elements, and the multiphase nature of these materials allows them to accommodate variation in the waste composition. Recent work has shown that they can be successfully produced from a melting and crystallization process. The objective of this report is to explain the design of ceramic host systems culminating in a reference ceramic formulation for use in subsequent studies on process optimization and melt property data assessment in support of FY13 melter demonstration testing. The waste stream used as the basis for the development and testing is a combination of the projected Cs/Sr separated stream, the Trivalent Actinide - Lanthanide Separation by Phosphorous reagent Extraction from Aqueous Komplexes (TALSPEAK) waste stream consisting of lanthanide fission products, the transition metal fission product waste stream resulting from the transuranic extraction (TRUEX) process, and a high molybdenum concentration with relatively low noble metal concentrations. In addition to the combined CS/LN/TM High Mo waste stream, variants without Mo and without Mo and Zr were also evaluated. Based on the results of fabricating and characterizing several simulated ceramic waste forms, two reference ceramic waste form compositions are recommended in this report. The first composition targets the CS/LN/TM combined waste stream with and without Mo. The second composition targets with CS/LN/TM combined waste stream with Mo and Zr removed. Waste streams that contain Mo must be produced in reducing environments to avoid Cs-Mo oxide phase formation. Waste streams without Mo have the ability to be melt processed in air. A path forward for further optimizing the processing steps needed to form the targeted phase assemblages is outlined in this report. Processing modifications including melting in a reducing atmosphere, and controlled heat treatment schedules are anticipated to improve the targeted elemental partitioning.

  16. Employee Information Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Form Employee Information Form PDF icon New Employee Information Form More Documents & Publications CX-007131: Categorical Exclusion Determination CX-007139: Categorical Exclusion Determination CX-007172: Categorical Exclusion Determination

  17. Capital Equipment Validation Form | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capital Equipment Validation Form Version Number: 2.0 Document Number: Form 48100.001 Effective Date: 02/2015 File (public): Office spreadsheet icon form_48100.001_rev2.xls

  18. DEQ UPDES Forms Website | Open Energy Information

    Open Energy Info (EERE)

    UPDES Forms Website Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: DEQ UPDES Forms Website Abstract A website containing forms and guidance for...

  19. Postdoctoral Initial Discussion Form | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Initial Discussion Form This form outlines initial goals and clarifies expectations between a postdoc and his/her supervisor for a successful and productive relationship. Microsoft Office document icon Postdoctoral Initial Discussion Form.doc

  20. Form:EZFeed Policy | Open Energy Information

    Open Energy Info (EERE)

    Help Apps Datasets Community Login | Sign Up Search Form Edit History Form:EZFeed Policy Jump to: navigation, search This is the 'EZFeed Policy' form. To add a page with this...

  1. CAIRS Registration Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Registration Form CAIRS Registration Form June 12, 2002 Computerized Accident/Incident Reporting System (CAIRS) User Registration Form Completed registration request should be sent by facsimile to EHSS InfoCenter at (301) 903-9823 PDF icon CAIRS Registration Form More Documents & Publications ORPS User Registration Form Headquarters Facilities Master Security Plan - Chapter 13, Controlled Unclassified Information Fire Protection System Account Request Form

  2. EIA - 2008 New Electric Power Forms

    U.S. Energy Information Administration (EIA) Indexed Site

    Forms What's happening with electric power forms? In 2008 EIA is consolidating 6 data collection forms into 2 forms. Fill out forms electronically (Available soon!) Not registered? Why is that a good thing? * For Electricity Generators: This reduces the number of forms to submit. (Re-registering is not required!) * For EIA and Taxpayers: This streamlines the collection process for better efficiency. * For Everyone: This enables us to provide additional information about the electric power

  3. Review of high-level waste form properties. [146 bibliographies

    SciTech Connect (OSTI)

    Rusin, J.M.

    1980-12-01

    This report is a review of waste form options for the immobilization of high-level-liquid wastes from the nuclear fuel cycle. This review covers the status of international research and development on waste forms as of May 1979. Although the emphasis in this report is on waste form properties, process parameters are discussed where they may affect final waste form properties. A summary table is provided listing properties of various nuclear waste form options. It is concluded that proposed waste forms have properties falling within a relatively narrow range. In regard to crystalline versus glass waste forms, the conclusion is that either glass of crystalline materials can be shown to have some advantage when a single property is considered; however, at this date no single waste form offers optimum properties over the entire range of characteristics investigated. A long-term effort has been applied to the development of glass and calcine waste forms. Several additional waste forms have enough promise to warrant continued research and development to bring their state of development up to that of glass and calcine. Synthetic minerals, the multibarrier approach with coated particles in a metal matrix, and high pressure-high temperature ceramics offer potential advantages and need further study. Although this report discusses waste form properties, the total waste management system should be considered in the final selection of a waste form option. Canister design, canister materials, overpacks, engineered barriers, and repository characteristics, as well as the waste form, affect the overall performance of a waste management system. These parameters were not considered in this comparison.

  4. Arizona Department of Environmental Quality's Application Forms...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Web Site: Arizona Department of Environmental Quality's Application Forms and Guidance Website Abstract This site contains forms...

  5. Pulse Pressure Forming of Lightweight Materials, Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Forming of Lightweight Materials, Development of High Strength Superplastic Al Sheet, Friction Stir Spot Welding of Advanced High Strength Steels Pulse Pressure Forming of...

  6. 2015 Housing Innovation Awards Application Form | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Housing Innovation Awards Application Form 2015 Housing Innovation Awards Application Form ... The 2015 ceremony will take place at the EEBA Excellence in Building Conference & Expo ...

  7. Research Form | Photosynthetic Antenna Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Form Research Form Students may arrange to receive credit andor choose to receive points toward the PARCI-CARES certificate through research in a faculty-supervised...

  8. DOE Forms National Center for Photovoltaics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Services » Forms » DOE Forms Management FAQ's DOE Forms Management FAQ's Facts.jpg What types of forms are there? Departmental Form: for use department-wide by DOE personnel only Headquarters (HQ) Form: developed or managed by a DOE Headquarters organization and generally for use by HQ or within an HQ element Local Form: for use within a specific DOE Field Office Optional Form: developed by a Federal agency for use by two or more agencies, or non-mandatory Government-wide use and approved by

  9. DOE Forms Management FAQ's | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services » Forms » DOE Forms Management FAQ's DOE Forms Management FAQ's Facts.jpg What types of forms are there? Departmental Form: for use department-wide by DOE personnel only Headquarters (HQ) Form: developed or managed by a DOE Headquarters organization and generally for use by HQ or within an HQ element Local Form: for use within a specific DOE Field Office Optional Form: developed by a Federal agency for use by two or more agencies, or non-mandatory Government-wide use and approved by

  10. Forms & Applications | Stanford Synchrotron Radiation Lightsource

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forms & Applications Forms: Before You Arrive User Information Log in to the User Portal to Register or Update Contact Informatioin Proposals Submit Proposals via User Portal...

  11. CONTACTS FOR INFORMATION MANAGEMENT: Forms & Records | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CONTACTS FOR INFORMATION MANAGEMENT: Forms & Records CONTACTS FOR INFORMATION MANAGEMENT: Forms & Records Maria Levesque, Director Enterprise Records Management Division (IM-23) ...

  12. Alten Energias Renovables Sociedad Limitada formly Solpark |...

    Open Energy Info (EERE)

    Alten Energias Renovables Sociedad Limitada formly Solpark Jump to: navigation, search Name: Alten Energias Renovables Sociedad Limitada (formly Solpark) Place: Bilbao, Spain...

  13. Design Code Survey Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Design Code Survey Form Design Code Survey Form Survey of Safety Software Used in Design of Structures, Systems, and Components 1. Introduction The Department's Implementation Plan ...

  14. FAQs for Survey Forms 804 and 814

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    intended for cracking into olefins. EIA-804 Survey form & instructions Contact: Robert Merriam, (202) 586-4615 EIA-814 Survey form & instructions Contact: Chris Buckner, (202)...

  15. NMMSS Information, Reports & Forms | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    Us Our Programs Defense Nuclear Security Nuclear Materials Management & Safeguards System NMMSS Information, Reports & Forms NMMSS Information, Reports & Forms D-23 DOE...

  16. Two Forms of Identification | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon Two Forms of Identification More Documents & Publications Self-Identification of Disability New Employee Orientation - Forms Checklist DOE Emergency Special Needs ...

  17. Form EIA-860 | Open Energy Information

    Open Energy Info (EERE)

    LibraryAdd to library Form: Form EIA-860 Abstract The U.S. Energy Information Administration (EIA) requires certain developers of electric generating plants (meeting certain...

  18. CDOT Applications and Forms | Open Energy Information

    Open Energy Info (EERE)

    to library Legal Document- OtherOther: CDOT Applications and FormsLegal Abstract The California Department of Transportation (CDOT) provides various applications and forms,...

  19. Cationic Phospholipids Forming Cubic Phases: Lipoplex Structure...

    Office of Scientific and Technical Information (OSTI)

    Cationic Phospholipids Forming Cubic Phases: Lipoplex Structure and Transfection Efficiency Citation Details In-Document Search Title: Cationic Phospholipids Forming Cubic Phases: ...

  20. California Water Forms | Open Energy Information

    Open Energy Info (EERE)

    Not provided DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for California Water Forms Citation California Water Forms(2009). Retrieved from...

  1. Form 2C | Open Energy Information

    Open Energy Info (EERE)

    Application: Form 2CLegal Abstract Form 2C: Application for Permit to Discharge Wastewater - Existing Industrial Facilities, current through August 14, 2014. Published NA...

  2. Form 2B | Open Energy Information

    Open Energy Info (EERE)

    Application: Form 2BLegal Abstract Form 2B: Application for Permit to Discharge Wastewater from Concentrated Animal Feeding Operations and Aquatic Animal Production...

  3. Thermal decomposition of silane to form hydrogenated amorphous Si film

    DOE Patents [OSTI]

    Strongin, Myron; Ghosh, Arup K.; Wiesmann, Harold J.; Rock, Edward B.; Lutz, III, Harry A.

    1980-01-01

    This invention relates to hydrogenated amorphous silicon produced by thermally decomposing silano (SiH.sub.4) or other gases comprising H and Si, at elevated temperatures of about 1700.degree.-2300.degree. C., and preferably in a vacuum of about 10.sup.-8 to 10.sup.-4 torr, to form a gaseous mixture of atomic hydrogen and atomic silicon, and depositing said gaseous mixture onto a substrate outside said source of thermal decomposition to form hydrogenated amorphous silicon.

  4. Purification of soluble form of adenylyl cyclase from testes (Journal

    Office of Scientific and Technical Information (OSTI)

    Article) | SciTech Connect Journal Article: Purification of soluble form of adenylyl cyclase from testes Citation Details In-Document Search Title: Purification of soluble form of adenylyl cyclase from testes No abstract available. Authors: Braun, T. Publication Date: 1991-01-01 OSTI Identifier: 5638947 Resource Type: Journal Article Resource Relation: Journal Name: Methods in Enzymology; (USA); Journal Volume: 195 Country of Publication: United States Language: English Subject: 59 BASIC

  5. Performance aspects of de Laval spray-forming nozzles

    SciTech Connect (OSTI)

    McHugh, K.M.; Key, J.F.

    1993-05-01

    Spray forming is a multiphase fabrication technology in which a spray of finely atomized liquid droplets is directed onto a suitably shaped substrate or pattern to produce a coherent, near-net-shape deposit The technology can simplify materials processing where simultaneously improving product quality. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials using de Laval nozzles. Here we briefly describe the flow field characterization and atomization behavior of liquid metals in linear de Laval nozzles, and illustrate their versatility by summarizing results from three spray-forming programs. In one program, low-carbon steel strip >0.75 mm was produced. In another program, polymer membranes {approximately} 5 {mu}m thick were spray formed. Finally, recent results in spray forming molds, dies, and related tooling for rapid prototyping are described.

  6. Performance aspects of de Laval spray-forming nozzles

    SciTech Connect (OSTI)

    McHugh, K.M.; Key, J.F.

    1993-01-01

    Spray forming is a multiphase fabrication technology in which a spray of finely atomized liquid droplets is directed onto a suitably shaped substrate or pattern to produce a coherent, near-net-shape deposit The technology can simplify materials processing where simultaneously improving product quality. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials using de Laval nozzles. Here we briefly describe the flow field characterization and atomization behavior of liquid metals in linear de Laval nozzles, and illustrate their versatility by summarizing results from three spray-forming programs. In one program, low-carbon steel strip >0.75 mm was produced. In another program, polymer membranes [approximately] 5 [mu]m thick were spray formed. Finally, recent results in spray forming molds, dies, and related tooling for rapid prototyping are described.

  7. Direct Deposit Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Direct Deposit Form Direct Deposit Form PDF icon Direct Deposit Form More Documents & Publications Employee In-Processing Forms Agreement for Minority Financial Institutions Participation in the Bank Deposit Financial Assistance Program Agreement for Minority Financial Institutions Participation in the Bank Deposit Financial Assistance Program

  8. Microsoft Word - Metrology Req form411.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Metrology Request Form ( Scanning Electron Microscopy, Optical Profilometry,) Personal Contact Information : Date: Name: Phone :...

  9. Delta Dental Claim Form | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Delta Dental Claim Form PDF icon 2010_DeltaDental_claimform

  10. Extension of Chern-Simons forms

    SciTech Connect (OSTI)

    Konitopoulos, Spyros; Savvidy, George

    2014-06-15

    We investigate metric independent, gauge invariant, and closed forms in the generalized Yang-Mills (YM) theory. These forms are polynomial on the corresponding fields strength tensors curvature forms and are analogous to the Pontryagin-Chern densities in the YM gauge theory. The corresponding secondary characteristic classes have been expressed in integral form in analogy with the Chern-Simons form. Because they are not unique, the secondary forms can be dramatically simplified by the addition of properly chosen differentials of one-step-lower-order forms. Their gauge variation can also be found yielding the potential anomalies in the gauge field theory.

  11. DOE - NNSA/NFO -- Request Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forms NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Forms Click the links below to view the form. Complete the form by filling-out the form fields online and clicking the submit button. Click the document title to view or download the Adobe PDF file marked with this icon ( PDF icon ) [ PDF Help ]. Print the file, fill-it out, and submit it to the address listed on the form. Comments/Feedback Ask a Question / Feedback Rate our website Webmaster Feedback Form Request Exhibits and

  12. Sample Forms | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Sample Forms U.S. Department of Energy / U.S. Nuclear Regulatory Commission Nuclear Materials Management & Safeguards System Sample Forms The below completed example forms contain "dummy" data for information purposes. For current up to date blank forms please go to the DOE/NRC forms link located on the NMMSS information page. Sample 740s DOE/NRC Form 740M Sample 742s and 742Cs 742 Example 1 Example 1A Example 2 Example 3 Example 3A Example 4 DOE/NRC Form 742 742C Example 1 Example

  13. Mentee Profile Form | Department of Energy

    Energy Savers [EERE]

    Services » Learning and Workforce Development » Workforce Development » Leadership Development » DOE Mentoring Program » Mentee Profile Form Mentee Profile Form The information you provide on this form will assist us in providing you with a list of prospective mentors from which to choose the most appropriate match. PDF icon Mentee Profile Form More Documents & Publications Mentor Profile Form Tools for the Mentor Tools for the Mentee Benefits Executive Resources Learning and Workforce

  14. ORPS User Registration Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    User Registration Form ORPS User Registration Form September 1, 2015 Operational Event Information Systems Registration Form For Occurrence Reporting and Processing System PDF icon ORPS User Registration Form More Documents & Publications ORPS Facility Registration Form Microsoft Word - CHAP02ESH _REVISED1_3.doc Occurrence Reporting and Processing System (ORPS) - PISA: TRU Waste Drums Containing Treated Nitrate Salts May Challenge the Safety Analysis

  15. Forming the Future | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Forming the Future Forming the Future This feature article from the April 2014 edition of the Fabricating and Forming Journal (FFJournal) describes how Ford Motor Co.'s sheet metal freeforming technology accelerates prototyping, taking stamping tool costs and lead time out of the equation. Reprinted with permission of FFJournal PDF icon Forming the Future, FFJournal (April 2014) More Documents & Publications RAPID FREEFORM SHEET METAL FORMING: TECHNOLOGY DEVELOPMENT AND SYSTEM VERIFICATION

  16. Pre-form ceramic matrix composite cavity and method of forming and method of forming a ceramic matrix composite component

    DOE Patents [OSTI]

    Monaghan, Philip Harold; Delvaux, John McConnell; Taxacher, Glenn Curtis

    2015-06-09

    A pre-form CMC cavity and method of forming pre-form CMC cavity for a ceramic matrix component includes providing a mandrel, applying a base ply to the mandrel, laying-up at least one CMC ply on the base ply, removing the mandrel, and densifying the base ply and the at least one CMC ply. The remaining densified base ply and at least one CMC ply form a ceramic matrix component having a desired geometry and a cavity formed therein. Also provided is a method of forming a CMC component.

  17. Labor Relations

    Broader source: Energy.gov [DOE]

    Addressing Poor Performance What Happens if an Employee’s Performance is Below the Meets Expectations (ME) level? Any time during the appraisal period an employee demonstrates that he/she is performing below the ME level in at least one critical element, the Rating Official should contact his/her Human Resources Office for guidance and: •If performance is at the Needs Improvement (NI) level; issue the employee a Performance Assistance Plan (PAP); or •If performance is at the Fails to Meet Expectations (FME) level; issue the employee a Performance Improvement Plan (PIP). Department of Energy Headquarters and The National Treasury Employees Union (NTEU) Collective Bargaining Agreement The National Treasury Employees Union (NTEU) is the exclusive representative of bargaining unit employees at the Department of Energy Headquarters offices in the Washington DC metropolitan area. The terms and conditions of this agreement have been negotiated by DOE and NTEU, and prescribe their respective rights and obligations in matters related to conditions of employment. Headquarters 1187 Request For Payroll Deductions For Labor Organization Dues The Request for Payroll Deduction for Labor Organization Dues (SF-1187) permits eligible employees, who are members of the National Treasury Employees Union (NTEU), to authorize voluntary allotments from their compensation. Headquarters 1188 Cancellation Of Payroll Deductions For Labor Organization Dues The Cancellation of Payroll Deductions for Labor Organizations Dues (SF-1188) permits eligible employees, who are members of the National Treasury Employees Union (NTEU), to cancel dues allotments. The National Treasury Employees Union, Collective Bargaining Agreement, Article 9 – Dues Withholding This article is for the purpose of permitting eligible employees, who are members of the National Treasury Employees Union (NTEU), to authorize voluntary allotments from their compensation.

  18. Sources: Energy Information Administration, Form EIA-182,

    U.S. Energy Information Administration (EIA) Indexed Site

    "Domestic Crude Oil First Purchase Report"; Form EIA-856, "Monthly Foreign Crude Oil Acquisition Report"; and Form EIA-14, "Refiners' Monthly Cost Report." 0 6 12 18 24 30 J F M A...

  19. Paperclips Supply Store Forms | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Catalog Order Form for Non-Stocked or Specialty Items For any non-stocked or special item that needs to be ordered, the Catalog Order Form (pdf) needs to be filled in. All supplies...

  20. Form 2D | Open Energy Information

    Open Energy Info (EERE)

    D Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Permit ApplicationPermit Application: Form 2DLegal Abstract Form 2D: Application for Permit to...

  1. 2011 Form EIA-63A Instructions

    Gasoline and Diesel Fuel Update (EIA)

    U. S. DEPARTMENT OF ENERGY Form Approved U.S. ENERGY INFORMATION ADMINISTRATION OMB No. 1905-0196 Washington, DC 20585 Expires: 12312013 FORM EIA-63A ANNUAL SOLAR THERMAL ...

  2. Better Buildings Residential Network Membership Form | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Residential Network Recommended Instructions for Downloading and Saving Membership Form Adobe Reader 6.0 or higher is required to view and print PDF forms. To obtain the latest...

  3. New Employee Forms | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    check in process, you may print off the forms below and bring the completed forms to the Human Resources Office on your first day of work. New employees or returning employees...

  4. Form:Buildings Publication | Open Energy Information

    Open Energy Info (EERE)

    name already exists, you will be sent to a form to edit that page. Create or edit Retrieved from "http:en.openei.orgwindex.php?titleForm:BuildingsPublication&oldid270103...

  5. Form:Buildings Model | Open Energy Information

    Open Energy Info (EERE)

    with that name already exists, you will be sent to a form to edit that page. Create or edit Retrieved from "http:en.openei.orgwindex.php?titleForm:BuildingsModel&oldid270041...

  6. Texas GLO Coastal Forms | Open Energy Information

    Open Energy Info (EERE)

    Coastal Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Texas GLO Coastal FormsLegal Abstract The Texas General Land Office...

  7. TCEQ Water Forms | Open Energy Information

    Open Energy Info (EERE)

    Water Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: TCEQ Water FormsLegal Abstract The Texas Commission on Environmental...

  8. ADEQ Water Quality Forms | Open Energy Information

    Open Energy Info (EERE)

    ADEQ Water Quality Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: ADEQ Water Quality FormsLegal Abstract The Arizona...

  9. ADNR Water Forms | Open Energy Information

    Open Energy Info (EERE)

    ADNR Water Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: ADNR Water FormsLegal Abstract The Alaska Department of Natural...

  10. The NERSC Allocation Request Form (ERCAP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    How to Submit a 2014 ERCAP Request Home » For Users » Accounts & Allocations » Allocations » Allocation Request Form (ERCAP) The NERSC Allocation Request Form (ERCAP) Requests to use NERSC resources are submitted annually via a web form known as the ERCAP (Energy Research Computing Allocations Process) Request Form. ERCAP is accessed through the NERSC Information Management (NIM) web interface and is available year-round. If you are new to NERSC and want to apply for an allocation as a

  11. CONFIGURATION CHANGE PROPOSAL FORM | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CONFIGURATION CHANGE PROPOSAL FORM CONFIGURATION CHANGE PROPOSAL FORM This form is used for sharing information on Domain Name Server (DNS) changes, new requirements, modifications or enhancements within the DOE Headquarters Programmatic and Office Management Areas. Microsoft Office document icon This form is used for sharing information on Domain Name Server (DNS) changes, new requirements, modifications or enhancements within the DOE Headquarters Programmatic and Office Management Areas. More

  12. EEO Intake Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EEO Intake Form EEO Intake Form Download and fill out this form to start the process for Equal Employment Opportunity complaints at the Department of Energy. For more information about the EEO process, visit this site. To get in touch with our Office of Civil Rights, call (202) 586-2218. PDF icon DOE EEO Intake Form 2016 More Documents & Publications Equal Employment Opportunity Intake Process DOE F 1600.2 DOE F 1600.1

  13. Paperwork Reduction Act Forms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Paperwork Reduction Act Forms Paperwork Reduction Act Forms You may need to fill out one or several of these forms depending on the nature of your survey or usability project. See the Paperwork Reduction Act Web page for more information about the process. Contact the Web Usability Coordinator if you have questions about which forms to complete. File Paperwork Reduction Act Submission: OMB 83-I File Paperwork Reduction Act Supporting Statement Microsoft Office document icon 30-Day Federal

  14. Fermilab at Work | Manuals and Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Policy Guide Engineering Manual Engineering Manual Engineering Manual Appendices Risk Assessment Spreadsheet Engineering Manual Rollout Teamcenter Rollout Facilities Request Form...

  15. Lobbyist Disclosure Form - First Solar | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    First Solar Lobbyist Disclosure Form - First Solar Susan Richardson, Energy Department loan programs chief counsel; Douglas Schultz, Energy Department senior investment officer; Andrzej Potasinski, Energy Department senior investment officer; Nancy Donovan, Energy Department general counsel; and Jonathan Silver, Energy Department loans program executive director, discussed the status of the First Solar Topaz Project with Kathleen Weiss, First Solar government relations vice president. PDF icon

  16. Prescriptive Path compliance form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Prescriptive Path compliance form Prescriptive Path compliance form This Prescriptive Path compliance form shall be submitted to: doechallengehome@newportpartnersllc.com File challenge_home_prescriptive_compliance_5-12.docx More Documents & Publications Version Tracking Document for DOE Challenge Homes, National Program Requirements (Rev. 03) DOE Zero Energy Ready Home National Program Requirements (Rev. 04) Washington DOE ZERH Program Requirements

  17. Form W-8 BEN (Rev. February 2014)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    W-8BEN (Rev. February 2014) Department of the Treasury Internal Revenue Service Certificate of Foreign Status of Beneficial Owner for United States Tax Withholding and Reporting (Individuals) ▶ For use by individuals. Entities must use Form W-8BEN-E. ▶ Information about Form W-8BEN and its separate instructions is at www.irs.gov/formw8ben. ▶ Give this form to the withholding agent or payer. Do not send to the IRS. OMB No. 1545-1621 Do NOT use this form if: Instead, use Form: * You are NOT

  18. Enforcement Letter, Westinghouse Savannah River Company- July 21, 1998

    Broader source: Energy.gov [DOE]

    Issued to Westinghouse Savannah River Company related to Notification of Incomplete Corrective Action

  19. STAR-FORMING GALAXY EVOLUTION IN NEARBY RICH CLUSTERS

    SciTech Connect (OSTI)

    Tyler, K. D.; Rieke, G. H.; Bai, L.

    2013-08-20

    Dense environments are known to quench star formation in galaxies, but it is still unknown what mechanism(s) are directly responsible. In this paper, we study the star formation of galaxies in A2029 and compare it to that of Coma, combining indicators at 24 {mu}m, H{alpha}, and UV down to rates of 0.03 M{sub Sun} yr{sup -1}. We show that A2029's star-forming galaxies follow the same mass-SFR relation as the field. The Coma cluster, on the other hand, has a population of galaxies with star formation rates (SFRs) significantly lower than the field mass-SFR relation, indicative of galaxies in the process of being quenched. Over half of these galaxies also host active galactic nuclei. Ram-pressure stripping and starvation/strangulation are the most likely mechanisms for suppressing the star formation in these galaxies, but we are unable to disentangle which is dominating. The differences we see between the two clusters' populations of star-forming galaxies may be related to their accretion histories, with A2029 having accreted its star-forming galaxies more recently than Coma. Additionally, many early-type galaxies in A2029 are detected at 24 {mu}m and/or in the far-UV, but this emission is not directly related to star formation. Similar galaxies have probably been classified as star forming in previous studies of dense clusters, possibly obscuring some of the effects of the cluster environment on true star-forming galaxies.

  20. Metal Compression Forming of aluminum alloys and metal matrix composites

    SciTech Connect (OSTI)

    Viswanathan, S.; Ren, W.; Porter, W.D.; Brinkman, C.R.; Sabau, A.S.; Purgert, R.M.

    2000-02-01

    Metal Compression Forming (MCF) is a variant of the squeeze casting process, in which molten metal is allowed to solidify under pressure in order to close porosity and form a sound part. However, the MCF process applies pressure on the entire mold face, thereby directing pressure on all regions of the casting and producing a uniformly sound part. The process is capable of producing parts with properties close to those of forgings, while retaining the near net shape, complexity in geometry, and relatively low cost of the casting process.

  1. New Species of Cyanobacteria Forms Intracellular Carbonates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Species of Cyanobacteria Forms Intracellular Carbonates New Species of Cyanobacteria Forms Intracellular Carbonates Print Wednesday, 30 January 2013 00:00 A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the Mexican Lake of Alchichica where massive carbonate rocks form. Cyanobacteria have been impacting the global carbon cycle of the Earth for more than 2.3 billion years by assimilating CO2 into organic compounds and triggering

  2. Supplier Information Form Date: New Revision

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Supplier Information Form Date: New Revision Interested suppliers may complete and submit a Supplier Information Form to be included into LANS' vendor database. Suppliers are advised that there is no guarantee any solicitations or awards will be sent to Supplier by submitting a Supplier Information Form; however, in the event a solicitation is sent to the Supplier from an LANS Procurement Official, then a more formal quotation/offer may be required. Legal Business Name: D/B/A: (if applicable)

  3. Hanford Speakers Bureau Request Form - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hanford Speakers Bureau Hanford Speakers Bureau Request Form Hanford Speakers Bureau Hanford Speakers Bureau Request Form Hanford Speakers Bureau Frequently Asked Questions Why Hanford? Video Hanford Speakers Bureau Presentations FY2015 Hanford Speakers Bureau Presentations FY2014 Hanford Speakers Bureau Presentations FY2013 Hanford Site Tours Hanford Speakers Bureau Request Form Email Email Page | Print Print Page |Text Increase Font Size Decrease Font Size To request a Hanford Speakers Bureau

  4. Microsoft Word - JLFTourForm.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jupiter Laser Facility Tour Request Form Host Name/Organization Extension Pager Administrative Support Email Extension Name of Group or Affiliation Tour Date Tour Time Number of Guests Tour Guide Special Needs Purpose of JLF Tour Name (one name per box) Company/Affiliation Country of Citizenship Signature Email completed form to JLF Administrator, Beth Mariotti at mariotti2@llnl.gov or fax to 925-422-6907. Approved by: Approved Date Approval Signature Submit Form to JLF Administrator

  5. Form 2E | Open Energy Information

    Open Energy Info (EERE)

    Application for Facilities that do not Discharge Process Wastewaters, current through August 14, 2014. Published NA Year Signed or Took Effect 2014 Legal Citation Form 2E:...

  6. Form EIA-923 Mock-Ups

    Gasoline and Diesel Fuel Update (EIA)

    Hours: 2.3 FORM EIA-923 POWER PLANT OPERATIONS REPORT ... purchase received for the use of electricity generation. ... COMPANY SADIE SAFETY CLEAN SALT RIVER PROJECT SAMPSON COAL ...

  7. Microsoft Word - ProjectProposalForm.dotx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    If yes, who? Please attach a list of collaborators and students, if any, from whom we can expect exposure request forms for this...

  8. Change Request Forms | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Blog Home About Us Our Programs Defense Nuclear Security Nuclear Materials Management & Safeguards System NMMSS ... Change Request Forms U.S. Department of Energy ...

  9. FAQs for Survey Form EIA-7A

    Gasoline and Diesel Fuel Update (EIA)

    ... See the EIA Glossary for other coal definitions. How does EIA classify coal rank? Rank ... Form(Includes Instructions). Calculator Conversion calculator Who can I contact? Survey ...

  10. FAQs for Survey Form EIA-8A

    Gasoline and Diesel Fuel Update (EIA)

    ... See the EIA Glossary for other coal definitions. How does EIA classify coal rank? Rank ... Form (Includes Instructions) Calculator Conversion calculator Who can I contact? Survey ...

  11. FAQs for Survey Form EIA-3

    Gasoline and Diesel Fuel Update (EIA)

    ... See the EIA Glossary for coal definitions. How does EIA classify coal rank? Rank types ... Forms (Includes Instructions) Calculator Conversion calculator Who can I contact? Survey ...

  12. Electronic Comment Form | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Office of General Counsel National Environmental Policy Act (NEPA) NEPA Reading Room Draft Site-Wide Environmental Impact Statement Nevada Electronic Comment Form...

  13. ORPS Facility Registration Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Facility Registration Form ORPS Facility Registration Form June 9, 2014 Add, Change or Delete a Facility for Occurrence Reporting and Processing System Submit completed form to: U.S. Department of Energy AU User Support EMAIL: ORPSsupport@hq.doe.gov PHONE: 800-473-4375 FAX: 301-903-9823 Note: Only one facility per form Type or print all entries TYPE OF CHANGE: Add a Facility (Complete Section 1.A, then go to Section 2) Change a Facility (Complete Section 1.B, then go to Section) Delete a

  14. FormCampusMachineShopsLabs.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Highway Baton Rouge, Louisiana 70806 225-578-8887 225-578-6954 (Fax) Form for Campus Machine Shops and Labs Purchaser's Name Phone ...

  15. FAQs for Survey Form EIA-782A

    Gasoline and Diesel Fuel Update (EIA)

    ... Information from this form is provided to the Defense Energy Support Center for market value analysis. For more information on data confidentiality, please see Section 8, ...

  16. Process for forming transparent aerogel insulating arrays

    SciTech Connect (OSTI)

    Tewari, P.H.; Hunt, A.J.

    1986-09-09

    This patent describes a drying process for forming transparent aerogel insulating arrays of the type utilizing the steps of hydrolyzing and condensing alkoxides to form alcogels, and subsequently removing the alcohol therefrom to form aerogels, the improvement comprising the additional step, after alcogels are formed, of substituting a solvent having a critical temperature less than the critical temperature of the alcohol for the alcohol in the alcogels, and drying the resulting gels at a supercritical temperature for the solvent, to thereby provide a transparent aerogel array within a substantially reduced drying time period.

  17. Miscellaneous Forms | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Miscellaneous Forms Miscellaneous Forms The following miscellaneous forms are provided in PDF fillable and/or Word format. Click the link in the "Format" column to open a copy of the form or right-click to download. Number* Title/Description Format** SF-85 Questionnaire for Non-Sensitive Positions PDF-fil UCN-13A Relocation Expense Report PDF-fil, PDF print UCN-15436 Gifts and Grants Request PDF-fil, Word UCN-16708 Request for Authorization to Ship SNM or Non-SNM Material (U) Word

  18. New Species of Cyanobacteria Forms Intracellular Carbonates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Species of Cyanobacteria Forms Intracellular Carbonates Print A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the...

  19. NDEP 401 WQ Forms | Open Energy Information

    Open Energy Info (EERE)

    Legal Document- OtherOther: NDEP 401 WQ FormsLegal Abstract The Nevada Division of Environmental Protection (NDEP) Bureau of Water Quality Planning (BWQP) provides links to...

  20. New Species of Cyanobacteria Forms Intracellular Carbonates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    rather than external precipitates, cells may not have been entombed within mineral shells, and so calcified cyanobacteria microfossils may not have formed, explaining the...

  1. Form EIA-860 Instructions | Open Energy Information

    Open Energy Info (EERE)

    plants with instructions on completing Form EIA-860. The U.S. Energy Information Administration (EIA) requires certain developers of electric generating plants (meeting defined...

  2. ODEQ - Construction Stormwater Application and Forms Manual ...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: ODEQ - Construction Stormwater Application and Forms ManualPermitting...

  3. Form:RRSection | Open Energy Information

    Open Energy Info (EERE)

    source History View New Pages Recent Changes All Special Pages Semantic SearchQuerying Get Involved Help Apps Datasets Community Login | Sign Up Search Form Edit History...

  4. Form W-8BEN (Rev. February 2006)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Form W-8BEN (Rev. February 2006) Department of the Treasury Internal Revenue Service Certificate of Foreign Status of Beneficial Owner for United States Tax Withholding See...

  5. Form W-8BEN (Rev. February 2006)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Form W-8BEN (Rev. February 2006) Department of the Treasury Internal Revenue Service Certificate of Foreign Status of Beneficial Owner for United States Tax Withholding ᮣ See separate instructions. ᮣ Give this form to the withholding agent or payer. Do not send to the IRS. OMB No. 1545-1621 Do not use this form for: Instead, use Form: ● A foreign partnership, a foreign simple trust, or a foreign grantor trust (see instructions for exceptions) W-8ECI or W-8IMY ● A foreign government,

  6. Secondary Waste Forms and Technetium Management

    Office of Environmental Management (EM)

    Secondary Waste Forms and Technetium Management Joseph H. Westsik, Jr. Pacific Northwest ... liquid effluents under the Dangerous Waste Permit for disposal at the Integrated ...

  7. Deformation and Forming of Joined Materials

    SciTech Connect (OSTI)

    Carsley, John; Hovanski, Yuri; Clarke, Kester D.; Krajewski, Paul E.

    2014-09-23

    Introductory article to a set of invited papers from the TMS committee on shaping and forming. This paper introduces a set of papers that were prepared to discussing the deformation and forming of joined materials, and to announce an upcoming symposium at the 2015 MS&T meeting in Columbus Ohio.

  8. ACOUSTIC FORMING FOR ENHANCED DEWATERING AND FORMATION

    SciTech Connect (OSTI)

    Cyrus K Aidun

    2007-11-30

    The next generation of forming elements based on acoustic excitation to increase drainage and enhances formation both with on-line control and profiling capabilities has been investigated in this project. The system can be designed and optimized based on the fundamental experimental and computational analysis and investigation of acoustic waves in a fiber suspension flow and interaction with the forming wire.

  9. Forensic Drug Testing Custody and Control Form

    Broader source: Energy.gov [DOE]

    Forensic Drug Testing Custody and Control Form. A copy of the drug testing custody and control form for DOE contractors to use to comply with the drug testing requirements in 10 CFR part 707, Workplace Substance Abuse Programs at DOE Sites.

  10. Methods for forming long subsurface heaters

    DOE Patents [OSTI]

    Kim, Dong Sub

    2013-09-17

    A method for forming a longitudinal subsurface heater includes longitudinally welding an electrically conductive sheath of an insulated conductor heater along at least one longitudinal strip of metal. The longitudinal strip is formed into a tubular around the insulated conductor heater with the insulated conductor heater welded along the inside surface of the tubular.

  11. Composite materials formed with anchored nanostructures

    DOE Patents [OSTI]

    Seals, Roland D; Menchhofer, Paul A; Howe, Jane Y; Wang, Wei

    2015-03-10

    A method of forming nano-structure composite materials that have a binder material and a nanostructure fiber material is described. A precursor material may be formed using a mixture of at least one metal powder and anchored nanostructure materials. The metal powder mixture may be (a) Ni powder and (b) NiAl powder. The anchored nanostructure materials may comprise (i) NiAl powder as a support material and (ii) carbon nanotubes attached to nanoparticles adjacent to a surface of the support material. The process of forming nano-structure composite materials typically involves sintering the mixture under vacuum in a die. When Ni and NiAl are used in the metal powder mixture Ni.sub.3Al may form as the binder material after sintering. The mixture is sintered until it consolidates to form the nano-structure composite material.

  12. Method for forming porous platinum films

    DOE Patents [OSTI]

    Maya, Leon

    2000-01-01

    A method for forming a platinum film includes providing a substrate, sputtering a crystalline platinum oxide layer over at least a portion of the substrate, and reducing the crystalline platinum oxide layer to form the platinum film. A device includes a non-conductive substrate and a platinum layer having a density of between about 2 and 5 g/cm.sup.3 formed over at least a portion of the non-conductive substrate. The platinum films produced in accordance with the present invention provide porous films suitable for use as electrodes, yet require few processing steps. Thus, such films are less costly. Such films may be formed on both conductive and non-conductive substrates. While the invention has been illustrated with platinum, other metals, such as noble metals, that form a low density oxide when reactively sputtered may also be used.

  13. Low-level radioactive waste form qualification testing

    SciTech Connect (OSTI)

    Sohal, M.S.; Akers, D.W.

    1998-06-01

    This report summarizes activities that have already been completed as well as yet to be performed by the Idaho National Engineering and Environmental Laboratory (INEEL) to develop a plan to quantify the behavior of radioactive low-level waste forms. It briefly describes the status of various tasks, including DOE approval of the proposed work, several regulatory and environmental related documents, tests to qualify the waste form, preliminary schedule, and approximate cost. It is anticipated that INEEL and Brookhaven National Laboratory will perform the majority of the tests. For some tests, services of other testing organizations may be used. It should take approximately nine months to provide the final report on the results of tests on a waste form prepared for qualification. It is anticipated that the overall cost of the waste quantifying service is approximately $150,000. The following tests are planned: compression, thermal cycling, irradiation, biodegradation, leaching, immersion, free-standing liquid tests, and full-scale testing.

  14. NEUP Student Travel Request Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Student Travel Request Form NEUP Student Travel Request Form NEUP Fellowship Travel Request Form PDF icon Student Travel Request Form.pdf More Documents & Publications Investing in ...

  15. Slab edge insulating form system and methods

    DOE Patents [OSTI]

    Lee, Brain E.; Barsun, Stephan K.; Bourne, Richard C.; Hoeschele, Marc A.; Springer, David A.

    2009-10-06

    A method of forming an insulated concrete foundation is provided comprising constructing a foundation frame, the frame comprising an insulating form having an opening, inserting a pocket former into the opening; placing concrete inside the foundation frame; and removing the pocket former after the placed concrete has set, wherein the concrete forms a pocket in the placed concrete that is accessible through the opening. The method may further comprise sealing the opening by placing a sealing plug or sealing material in the opening. A system for forming an insulated concrete foundation is provided comprising a plurality of interconnected insulating forms, the insulating forms having a rigid outer member protecting and encasing an insulating material, and at least one gripping lip extending outwardly from the outer member to provide a pest barrier. At least one insulating form has an opening into which a removable pocket former is inserted. The system may also provide a tension anchor positioned in the pocket former and a tendon connected to the tension anchor.

  16. Employee Concerns Reporting Form | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Program / How Do You Report A Concern? Employee Concerns Reporting Form Employee Concerns Program Policy Statement DOE/NNSA recognizes that free and open expression of employee concerns is fundamental and essential to the safe and efficient operations of the Department's mission. Employees of the DOE/NNSA and any contractor or subcontractor fulfilling the DOE/NNSA's mission have the right and responsibility to report concerns relating to the environment, safety, health, security, fraud, waste,

  17. Low temperature waste form process intensification

    SciTech Connect (OSTI)

    Fox, K. M.; Cozzi, A. D.; Hansen, E. K.; Hill, K. A.

    2015-09-30

    This study successfully demonstrated process intensification of low temperature waste form production. Modifications were made to the dry blend composition to enable a 50% increase in waste concentration, thus allowing for a significant reduction in disposal volume and associated costs. Properties measurements showed that the advanced waste form can be produced using existing equipment and processes. Performance of the waste form was equivalent or better than the current baseline, with approximately double the amount of waste incorporation. The results demonstrate the feasibility of significantly accelerating low level waste immobilization missions across the DOE complex and at environmental remediation sites worldwide.

  18. SSRL/LCLS User Account Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    REVISED 08/13/12 CJK SSRL/LCLS User Account Form To open or renew an account, complete and submit this form along with an original Purchase Order (PO) from your institution. The PO should be made to SLAC National Accelerator Laboratory for the amount of estimated expenditures (the suggested minimum is $1,000). Send this form with the Purchase Order to: Jackie Kerlegan SLAC National Accelerator Laboratory User Research Administration, MS 99 2575 Sand Hill Rd. Menlo Park, CA 94025 FAX:

  19. Plasma formed ion beam projection lithography system

    DOE Patents [OSTI]

    Leung, Ka-Ngo; Lee, Yung-Hee Yvette; Ngo, Vinh; Zahir, Nastaran

    2002-01-01

    A plasma-formed ion-beam projection lithography (IPL) system eliminates the acceleration stage between the ion source and stencil mask of a conventional IPL system. Instead a much thicker mask is used as a beam forming or extraction electrode, positioned next to the plasma in the ion source. Thus the entire beam forming electrode or mask is illuminated uniformly with the source plasma. The extracted beam passes through an acceleration and reduction stage onto the resist coated wafer. Low energy ions, about 30 eV, pass through the mask, minimizing heating, scattering, and sputtering.

  20. Reductive Capacity Measurement of Waste Forms for Secondary Radioactive Wastes

    SciTech Connect (OSTI)

    Um, Wooyong; Yang, Jungseok; Serne, R. Jeffrey; Westsik, Joseph H.

    2015-09-28

    The reductive capacities of dry ingredients and final solid waste forms were measured using both the Cr(VI) and Ce(IV) methods and the results were compared. Blast furnace slag (BFS), sodium sulfide, SnF2, and SnCl2 used as dry ingredients to make various waste forms showed significantly higher reductive capacities compared to other ingredients regardless of which method was used. Although the BFS exhibits appreciable reductive capacity, it requires greater amounts of time to fully react. In almost all cases, the Ce(IV) method yielded larger reductive capacity values than those from the Cr(VI) method and can be used as an upper bound for the reductive capacity of the dry ingredients and waste forms, because the Ce(IV) method subjects the solids to a strong acid (low pH) condition that dissolves much more of the solids. Because the Cr(VI) method relies on a neutral pH condition, the Cr(VI) method can be used to estimate primarily the waste form surface-related and readily dissolvable reductive capacity. However, the Cr(VI) method does not measure the total reductive capacity of the waste form, the long-term reductive capacity afforded by very slowly dissolving solids, or the reductive capacity present in the interior pores and internal locations of the solids.

  1. Methods of forming semiconductor devices and devices formed using such methods

    DOE Patents [OSTI]

    Fox, Robert V; Rodriguez, Rene G; Pak, Joshua

    2013-05-21

    Single source precursors are subjected to carbon dioxide to form particles of material. The carbon dioxide may be in a supercritical state. Single source precursors also may be subjected to supercritical fluids other than supercritical carbon dioxide to form particles of material. The methods may be used to form nanoparticles. In some embodiments, the methods are used to form chalcopyrite materials. Devices such as, for example, semiconductor devices may be fabricated that include such particles. Methods of forming semiconductor devices include subjecting single source precursors to carbon dioxide to form particles of semiconductor material, and establishing electrical contact between the particles and an electrode.

  2. Aluminum forms in stream sediment: Relation to bedrock geology and water chemistry

    SciTech Connect (OSTI)

    Turner, R.R.; Bogle, M.A.; Zeiler, M.A.; Mulholland, P.J.; Elwood, J.W.; Cook, R.B.

    1987-01-01

    Longitudinal gradients in sediment and water chemistry were characterized in a high elevation stream in the southern Appalachian Mountains, USA, to elucidate the geochemical behavior of aluminum across gradients in pH (4.5 to 6.5) and elevation (1120 to 1895 m). Observed gradients are driven in part by the presence of pyritic bedrock, which occurs at higher elevations and yields acidity when exposed to oxidation by landslide activity. Exchangeable Al in sediment (estimated using potassium chloride) varied in response to monomeric Al in streamwater and thus decreased downstream. Organic Al in sediment (estimated using sodium pyrophosphate) did not vary in proportion to the organic carbon content of sediment. Amorphous Al in sediment (estimated as the difference between oxalate- and pyrophosphate-extractable Al) and Al extractable with acidified streamwater (pH 4.5) was lowest at the more acidic sites. These results suggest that increases in soluble Al in downstream reaches during episodic pH depressions could be due in part to the release of adsorbed and/or precipitated Al in sediment.

  3. MDF Form and Function (Text Version)

    Broader source: Energy.gov [DOE]

    This is a text version of the Manufacturing Demonstration Facilities (MDF) Form and Function video, originally presented on March 12, 2012 at the MDF Workshop held in Chicago, Illinois.

  4. Elevated temperature forming method and preheater apparatus

    DOE Patents [OSTI]

    Krajewski, Paul E; Hammar, Richard Harry; Singh, Jugraj; Cedar, Dennis; Friedman, Peter A; Luo, Yingbing

    2013-06-11

    An elevated temperature forming system in which a sheet metal workpiece is provided in a first stage position of a multi-stage pre-heater, is heated to a first stage temperature lower than a desired pre-heat temperature, is moved to a final stage position where it is heated to a desired final stage temperature, is transferred to a forming press, and is formed by the forming press. The preheater includes upper and lower platens that transfer heat into workpieces disposed between the platens. A shim spaces the upper platen from the lower platen by a distance greater than a thickness of the workpieces to be heated by the platens and less than a distance at which the upper platen would require an undesirably high input of energy to effectively heat the workpiece without being pressed into contact with the workpiece.

  5. Department of Energy Record of Invention Form

    Broader source: Energy.gov [DOE]

    DOE Form GC-213 (2-78) DOE PR-9-9 U.S. Department of Energy Office of Assistant General Counsel for Patents Record of Invention 

  6. Mediation Survey Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon Mediation Survey Form More Documents & Publications Microsoft Word - GC Mediation Evaluation 2-06-09.doc Mediation Brochure FIA-12-0044 - In the Matter of Cynthia Brown...

  7. RRC Form W-14 | Open Energy Information

    Open Energy Info (EERE)

    W-14 Jump to: navigation, search OpenEI Reference LibraryAdd to library Reference: RRC Form W-14 Published RRC, Date Not Provided DOI Not Provided Check for DOI availability:...

  8. RRC Form H-11 | Open Energy Information

    Open Energy Info (EERE)

    1 Jump to: navigation, search OpenEI Reference LibraryAdd to library Reference: RRC Form H-11 Published RRC, 1984 DOI Not Provided Check for DOI availability: http:crossref.org...

  9. ENG Form 4345 Application | Open Energy Information

    Open Energy Info (EERE)

    ENG Form 4345 ApplicationLegal Published NA Year Signed or Took Effect 2013 Legal Citation Not provided DOI Not Provided Check for DOI availability: http:crossref.org Online...

  10. Die singulation method and package formed thereby

    DOE Patents [OSTI]

    Anderson, Robert C. (Tucson, AZ); Shul, Randy J. (Albuquerque, NM); Clews, Peggy J. (Tijeras, NM); Baker, Michael S. (Albuquerque, NM); De Boer, Maarten P. (Albuquerque, NM)

    2012-08-07

    A method is disclosed for singulating die from a substrate having a sacrificial layer and one or more device layers, with a retainer being formed in the device layer(s) and anchored to the substrate. Deep Reactive Ion Etching (DRIE) etching of a trench through the substrate from the bottom side defines a shape for each die. A handle wafer is then attached to the bottom side of the substrate, and the sacrificial layer is etched to singulate the die and to form a frame from the retainer and the substrate. The frame and handle wafer, which retain the singulated die in place, can be attached together with a clamp or a clip and to form a package for the singulated die. One or more stops can be formed from the device layer(s) to limit a sliding motion of the singulated die.

  11. First Name Last Name EMPLOYEE INFORMATION FORM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    can withhold the correct federal income tax from your pay. Consider completing a new Form W-4 each year and when your personal or financial situation changes. Head of...

  12. Form:Tool | Open Energy Information

    Open Energy Info (EERE)

    Tool (Redirected from Form:Software Tool) Jump to: navigation, search Input your tool name below to add to the registry. If the tool is already in the registry, you will be able to...

  13. Front contact solar cell with formed emitter

    DOE Patents [OSTI]

    Cousins, Peter John

    2014-11-04

    A bipolar solar cell includes a backside junction formed by an N-type silicon substrate and a P-type polysilicon emitter formed on the backside of the solar cell. An antireflection layer may be formed on a textured front surface of the silicon substrate. A negative polarity metal contact on the front side of the solar cell makes an electrical connection to the substrate, while a positive polarity metal contact on the backside of the solar cell makes an electrical connection to the polysilicon emitter. An external electrical circuit may be connected to the negative and positive metal contacts to be powered by the solar cell. The positive polarity metal contact may form an infrared reflecting layer with an underlying dielectric layer for increased solar radiation collection.

  14. Front contact solar cell with formed emitter

    DOE Patents [OSTI]

    Cousins, Peter John

    2012-07-17

    A bipolar solar cell includes a backside junction formed by an N-type silicon substrate and a P-type polysilicon emitter formed on the backside of the solar cell. An antireflection layer may be formed on a textured front surface of the silicon substrate. A negative polarity metal contact on the front side of the solar cell makes an electrical connection to the substrate, while a positive polarity metal contact on the backside of the solar cell makes an electrical connection to the polysilicon emitter. An external electrical circuit may be connected to the negative and positive metal contacts to be powered by the solar cell. The positive polarity metal contact may form an infrared reflecting layer with an underlying dielectric layer for increased solar radiation collection.

  15. Microsoft Word - beamtime_request_form.dot

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BEAMTIME REQUEST FORM Please forward to Craig Stevens by Fax: 578-6954, or mail to CAMDLSU, 6980 Jefferson Highway, Baton Rouge, LA 70806, Room 107. Project Reference Number...

  16. Assessment of Preferred Depleted Uranium Disposal Forms

    SciTech Connect (OSTI)

    Croff, A.G.; Hightower, J.R.; Lee, D.W.; Michaels, G.E.; Ranek, N.L.; Trabalka, J.R.

    2000-06-01

    The Department of Energy (DOE) is in the process of converting about 700,000 metric tons (MT) of depleted uranium hexafluoride (DUF6) containing 475,000 MT of depleted uranium (DU) to a stable form more suitable for long-term storage or disposal. Potential conversion forms include the tetrafluoride (DUF4), oxide (DUO2 or DU3O8), or metal. If worthwhile beneficial uses cannot be found for the DU product form, it will be sent to an appropriate site for disposal. The DU products are considered to be low-level waste (LLW) under both DOE orders and Nuclear Regulatory Commission (NRC) regulations. The objective of this study was to assess the acceptability of the potential DU conversion products at potential LLW disposal sites to provide a basis for DOE decisions on the preferred DU product form and a path forward that will ensure reliable and efficient disposal.

  17. Nanoeletromechanical switch and logic circuits formed therefrom

    DOE Patents [OSTI]

    Nordquist, Christopher D.; Czaplewski, David A.

    2010-05-18

    A nanoelectromechanical (NEM) switch is formed on a substrate with a source electrode containing a suspended electrically-conductive beam which is anchored to the substrate at each end. This beam, which can be formed of ruthenium, bows laterally in response to a voltage applied between a pair of gate electrodes and the source electrode to form an electrical connection between the source electrode and a drain electrode located near a midpoint of the beam. Another pair of gate electrodes and another drain electrode can be located on an opposite side of the beam to allow for switching in an opposite direction. The NEM switch can be used to form digital logic circuits including NAND gates, NOR gates, programmable logic gates, and SRAM and DRAM memory cells which can be used in place of conventional CMOS circuits, or in combination therewith.

  18. Method for forming or bonding a liner

    DOE Patents [OSTI]

    Prevender, Thomas S.

    1980-01-01

    A process and means for forming or bonding a liner to a shell or element wherein the liner is filled with or immersed in water and a portion of the water is frozen.

  19. Proton form factor effects in hydrogenic atoms

    SciTech Connect (OSTI)

    Daza, F. Garcia; Kelkar, N. G.; Nowakowski, M.

    2011-10-21

    The proton structure corrections to the hyperfine splittings in electronic and muonic hydrogen are evaluated using the Breit potential with electromagnetic form factors. In contrast to other methods, the Breit equation with q{sup 2} dependent form factors is just an extension of the standard Breit equation which gives the hyperfine splitting Hamiltonian. Precise QED corrections are comparable to the structure corrections which therefore need to be evaluated ab initio.

  20. Benefits Forms and Information | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New Employee Orientation » Benefits Forms and Information Benefits Forms and Information As a Federal employee, you may have the opportunity to participate in a number of employee benefit and family-friendly programs. If your appointment to Federal employment confers eligibility, you may elect to participate in health, dental, and life insurance programs; retirement savings plans; flexible spending accounts; long-term care insurance; and vacation and sick leave. In addition, there are a number

  1. New Species of Cyanobacteria Forms Intracellular Carbonates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Species of Cyanobacteria Forms Intracellular Carbonates Print A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the Mexican Lake of Alchichica where massive carbonate rocks form. Cyanobacteria have been impacting the global carbon cycle of the Earth for more than 2.3 billion years by assimilating CO2 into organic compounds and triggering calcium carbonate (CaCO3) precipitation. Despite the importance of this cyanobacteria-mediated

  2. New Species of Cyanobacteria Forms Intracellular Carbonates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Species of Cyanobacteria Forms Intracellular Carbonates Print A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the Mexican Lake of Alchichica where massive carbonate rocks form. Cyanobacteria have been impacting the global carbon cycle of the Earth for more than 2.3 billion years by assimilating CO2 into organic compounds and triggering calcium carbonate (CaCO3) precipitation. Despite the importance of this cyanobacteria-mediated

  3. New Species of Cyanobacteria Forms Intracellular Carbonates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Species of Cyanobacteria Forms Intracellular Carbonates Print A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the Mexican Lake of Alchichica where massive carbonate rocks form. Cyanobacteria have been impacting the global carbon cycle of the Earth for more than 2.3 billion years by assimilating CO2 into organic compounds and triggering calcium carbonate (CaCO3) precipitation. Despite the importance of this cyanobacteria-mediated

  4. Method of forming a chemical composition

    DOE Patents [OSTI]

    Bingham, Dennis N.; Wilding, Bruce M.; Klingler, Kerry M.; Zollinger, William T.; Wendt, Kraig M.

    2007-10-09

    A method of forming a chemical composition such as a chemical hydride is described and which includes the steps of selecting a composition having chemical bonds and which is capable of forming a chemical hydride; providing a source of hydrogen; and exposing the selected composition to an amount of ionizing radiation to encourage the changing of the chemical bonds of the selected composition, and chemically reacting the selected composition with the source of hydrogen to facilitate the formation of a chemical hydride.

  5. New Species of Cyanobacteria Forms Intracellular Carbonates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Species of Cyanobacteria Forms Intracellular Carbonates Print A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the Mexican Lake of Alchichica where massive carbonate rocks form. Cyanobacteria have been impacting the global carbon cycle of the Earth for more than 2.3 billion years by assimilating CO2 into organic compounds and triggering calcium carbonate (CaCO3) precipitation. Despite the importance of this cyanobacteria-mediated

  6. Method for forming cooperative binary ionic solids

    DOE Patents [OSTI]

    Shelnutt, John A.; Martin, Kathleen E.; Wang, Zhongchun; Medforth, Craig J.

    2013-03-05

    A nanostructured molecular unit and method for forming is described where a cationic porphyrin having an ethanolic substituent species and a metal in the porphyrin cavity is combined with an anionic porphyrin having a sulfonate substituent species and a metal in the porphyrin cavity to form by self-assembly a nanostructured molecular unit with a morphology comprising four dendritic elements connected at a central node.

  7. What Makes Clouds Form, Grow and Die?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Makes Clouds Form, Grow and Die? What Makes Clouds Form, Grow and Die? Simulations Show Raindrops Physics May Affect Climate Model Accuracy February 19, 2015 thunderstorm Brazil shuttle NASA 1984 540 PNNL scientists used real-world observations to simulate how small clouds are likely to stay shallow, while larger clouds grow deeper because they mix with less dry air. Pictured are small and large thunderstorms growing over southern Brazil, taken from the space shuttle. Image: NASA Johnson Space

  8. Method for forming cooperative binary ionic solids

    DOE Patents [OSTI]

    Shelnutt, John A.; Martin, Kathleen E.; Wang, Zhongchun; Medforth, Craig J.

    2014-09-09

    A nanostructured molecular unit and method for forming is described where a cationic porphyrin having an ethanolic substituent species and a metal in the porphyrin cavity is combined with an anionic porphyrin having a sulfonate substituent species and a metal in the porphyrin cavity to form by self-assembly a nanostructured molecular unit with a morphology comprising four dendritic elements connected at a central node.

  9. Employee Assistance Self-ID Form

    Energy Savers [EERE]

    Request for Assistance During an Emergency Employee Self Identification This form is to be used by persons who expect that they will need assistance during an emergency. The purpose of this form is to help Program Office supervisors and the Incident Management Team ensure that plans are in place to assist persons with temporary or permanent disabilities during an emergency. The Incident Management Team would rather work with someone on a specific plan of action before an emergency than have an

  10. SEPARATIONS AND WASTE FORMS CAMPAIGN IMPLEMENTATION PLAN

    SciTech Connect (OSTI)

    Vienna, John D.; Todd, Terry A.; Peterson, Mary E.

    2012-11-26

    This Separations and Waste Forms Campaign Implementation Plan provides summary level detail describing how the Campaign will achieve the objectives set-forth by the Fuel Cycle Reasearch and Development (FCRD) Program. This implementation plan will be maintained as a living document and will be updated as needed in response to changes or progress in separations and waste forms research and the FCRD Program priorities.

  11. Form W-9 (Rev. October 2007)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Give form to the requester. Do not send to the IRS. Form W-9 Request for Taxpayer Identification Number and Certification (Rev. October 2007) Department of the Treasury Internal Revenue Service Name (as shown on your income tax return) List account number(s) here (optional) Address (number, street, and apt. or suite no.) City, state, and ZIP code Print or type See Specific Instructions on page 2. Taxpayer Identification Number (TIN) Enter your TIN in the appropriate box. The TIN provided must

  12. Security Forms | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Security Forms U.S. Department of Energy / U.S. Nuclear Regulatory Commission Nuclear Materials Management & Safeguards System Security Forms Federal Information Processing Standards Publications (FIPS PUBS) FIPS-Associated Documents FIPS 140-2 Security Requirements for Cryptograhic Modules FIPS 185 Escrowed Encryption Standard (EES) FIPS 186-2 Digital Signature Standard (DSS) From Microsoft From VeriSign Managing Contacts' Digital Certificates with Netscape Communicator Managing Contacts'

  13. Community Relations Plan

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environmental Stewardship Environmental Protection Community Relations Plan Community Relations Plan Consultations, communications, agreements, and disagreements...

  14. Secondary Waste Form Down Selection Data Package – Ceramicrete

    SciTech Connect (OSTI)

    Cantrell, Kirk J.; Westsik, Joseph H.

    2011-08-31

    As part of high-level waste pretreatment and immobilized low activity waste processing, liquid secondary wastes will be generated that will be transferred to the Effluent Treatment Facility on the Hanford Site for further treatment. These liquid secondary wastes will be converted to stable solid waste forms that will be disposed in the Integrated Disposal Facility. Currently, four waste forms are being considered for stabilization and solidification of the liquid secondary wastes. These waste forms are Cast Stone, Ceramicrete, DuraLith, and Fluidized Bed Steam Reformer. The preferred alternative will be down selected from these four waste forms. Pacific Northwest National Laboratory is developing data packages to support the down selection process. The objective of the data packages is to identify, evaluate, and summarize the existing information on the four waste forms being considered for stabilization and solidification of the liquid secondary wastes. The information included will be based on information available in the open literature and from data obtained from testing currently underway. This data package is for the Ceramicrete waste form. Ceramicrete is a relatively new engineering material developed at Argonne National Laboratory to treat radioactive and hazardous waste streams (e.g., Wagh 2004; Wagh et al. 1999a, 2003; Singh et al. 2000). This cement-like waste form can be used to treat solids, liquids, and sludges by chemical immobilization, microencapsulation, and/or macroencapsulation. The Ceramicrete technology is based on chemical reaction between phosphate anions and metal cations to form a strong, dense, durable, low porosity matrix that immobilizes hazardous and radioactive contaminants as insoluble phosphates and microencapsulates insoluble radioactive components and other constituents that do not form phosphates. Ceramicrete is a type of phosphate-bonded ceramic, which are also known as chemically bonded phosphate ceramics. The Ceramicrete binder is formed through an acid-base reaction between calcined magnesium oxide (MgO; a base) and potassium hydrogen phosphate (KH{sub 2}PO{sub 4}; an acid) in aqueous solution. The reaction product sets at room temperature to form a highly crystalline material. During the reaction, the hazardous and radioactive contaminants also react with KH{sub 2}PO{sub 4} to form highly insoluble phosphates. In this data package, physical property and waste acceptance data for Ceramicrete waste forms fabricated with wastes having compositions that were similar to those expected for secondary waste effluents, as well as secondary waste effluent simulants from the Hanford Tank Waste Treatment and Immobilization Plant were reviewed. With the exception of one secondary waste form formulation (25FA+25 W+1B.A. fabricated with the mixed simulant did not meet the compressive strength requirement), all the Ceramicrete waste forms that were reviewed met or exceeded Integrated Disposal Facility waste acceptance criteria.

  15. Process for forming transparent aerogel insulating arrays

    DOE Patents [OSTI]

    Tewari, P.H.; Hunt, A.J.

    1985-09-04

    An improved supercritical drying process for forming transparent silica aerogel arrays is described. The process is of the type utilizing the steps of hydrolyzing and condensing aloxides to form alcogels. A subsequent step removes the alcohol to form aerogels. The improvement includes the additional step, after alcogels are formed, of substituting a solvent, such as CO/sub 2/, for the alcohol in the alcogels, the solvent having a critical temperature less than the critical temperature of the alcohol. The resulting gels are dried at a supercritical temperature for the selected solvent, such as CO/sub 2/, to thereby provide a transparent aerogel array within a substantially reduced (days-to-hours) time period. The supercritical drying occurs at about 40/sup 0/C instead of at about 270/sup 0/C. The improved process provides increased yields of large scale, structurally sound arrays. The transparent aerogel array, formed in sheets or slabs, as made in accordance with the improved process, can replace the air gap within a double glazed window, for example, to provide a substantial reduction in heat transfer. The thus formed transparent aerogel arrays may also be utilized, for example, in windows of refrigerators and ovens, or in the walls and doors thereof or as the active material in detectors for analyzing high energy elementary particles or cosmic rays.

  16. Process for forming transparent aerogel insulating arrays

    DOE Patents [OSTI]

    Tewari, Param H.; Hunt, Arlon J.

    1986-01-01

    An improved supercritical drying process for forming transparent silica aerogel arrays is described. The process is of the type utilizing the steps of hydrolyzing and condensing aloxides to form alcogels. A subsequent step removes the alcohol to form aerogels. The improvement includes the additional step, after alcogels are formed, of substituting a solvent, such as CO.sub.2, for the alcohol in the alcogels, the solvent having a critical temperature less than the critical temperature of the alcohol. The resulting gels are dried at a supercritical temperature for the selected solvent, such as CO.sub.2, to thereby provide a transparent aerogel array within a substantially reduced (days-to-hours) time period. The supercritical drying occurs at about 40.degree. C. instead of at about 270.degree. C. The improved process provides increased yields of large scale, structurally sound arrays. The transparent aerogel array, formed in sheets or slabs, as made in accordance with the improved process, can replace the air gap within a double glazed window, for example, to provide a substantial reduction in heat transfer. The thus formed transparent aerogel arrays may also be utilized, for example, in windows of refrigerators and ovens, or in the walls and doors thereof or as the active material in detectors for analyzing high energy elementry particles or cosmic rays.

  17. Directory of Energy Data Collection Forms: Forms in use as of October 1996

    SciTech Connect (OSTI)

    1996-12-01

    This is the twentieth edition of the Directory of Energy Collection Data Forms, an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy.

  18. Hawaii Water Quality Certification Form | Open Energy Information

    Open Energy Info (EERE)

    Water Quality Certification Form Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Hawaii Water Quality Certification Form Form Type ApplicationNotice Form...

  19. Directory of Energy Data Collection Forms: Forms in use as of October 1993

    SciTech Connect (OSTI)

    Not Available

    1993-12-28

    This is the seventeenth edition of the Directory of Energy Data Collection forms, an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy (DOE). Originally entitled EIA Data Collection forms, this directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry.

  20. Method of forming aluminum oxynitride material and bodies formed by such methods

    DOE Patents [OSTI]

    Bakas, Michael P. (Ammon, ID) [Ammon, ID; Lillo, Thomas M. (Idaho Falls, ID) [Idaho Falls, ID; Chu, Henry S. (Idaho Falls, ID) [Idaho Falls, ID

    2010-11-16

    Methods of forming aluminum oxynitride (AlON) materials include sintering green bodies comprising aluminum orthophosphate or another sacrificial material therein. Such green bodies may comprise aluminum, oxygen, and nitrogen in addition to the aluminum orthophosphate. For example, the green bodies may include a mixture of aluminum oxide, aluminum nitride, and aluminum orthophosphate or another sacrificial material. Additional methods of forming aluminum oxynitride (AlON) materials include sintering a green body including a sacrificial material therein, using the sacrificial material to form pores in the green body during sintering, and infiltrating the pores formed in the green body with a liquid infiltrant during sintering. Bodies are formed using such methods.

  1. Formed Core Sampler Hydraulic Conductivity Testing

    SciTech Connect (OSTI)

    Miller, D. H.; Reigel, M. M.

    2012-09-25

    A full-scale formed core sampler was designed and functionally tested for use in the Saltstone Disposal Facility (SDF). Savannah River National Laboratory (SRNL) was requested to compare properties of the formed core samples and core drilled samples taken from adjacent areas in the full-scale sampler. While several physical properties were evaluated, the primary property of interest was hydraulic conductivity. Differences in hydraulic conductivity between the samples from the formed core sampler and those representing the bulk material were noted with respect to the initial handling and storage of the samples. Due to testing conditions, the site port samples were exposed to uncontrolled temperature and humidity conditions prior to testing whereas the formed core samples were kept in sealed containers with minimal exposure to an uncontrolled environment prior to testing. Based on the results of the testing, no significant differences in porosity or density were found between the formed core samples and those representing the bulk material in the test stand.

  2. Waste Form Evaluation Program. Final report

    SciTech Connect (OSTI)

    Franz, E.M.; Colombo, P.

    1985-09-01

    This report presents data that can be used to assess the acceptability of polyethylene and modified sulfur cement waste forms to meet the requirements of 10 CFR 61. The waste streams selected for this study include dry evaporator concentrate salts and incinerator ash as representative wastes which result from advanced volume reduction technologies and ion exchange resins which remain problematic for solidification using commercially available matrix materials. Property evaluation tests such as compressive strength, water immersion, thermal cycling, irradiation, biodegradation and leachability were conducted for polyethylene and sulfur cement waste forms over a range of waste-to-binder ratios. Based on the results of the tests, optimal waste loadings of 70 wt % sodium sulfate, 50 wt % boric acid, 40 wt % incinerator ash and 30 wt % ion exchange resins were established for polyethylene, although maximum loadings were considerably higher. For modified sulfur cement, optimal loadings of 40 wt % sodium sulfate, 40 wt % boric acid and 40 wt % incinerator ash are reported. Ion exchange resins are not recommended for incorporation into modified sulfur cement because of poor waste form performance even at very low waste concentrations. The results indicate that all waste forms tested within the range of optimal waste concentrations satisifed the requirements of the NRC Technical Position Paper on Waste Form.

  3. DWPF waste form compliance plan (Draft Revision)

    SciTech Connect (OSTI)

    Plodinec, M.J.; Marra, S.L.

    1991-01-01

    The Department of Energy currently has over 100 million liters of high-level radioactive waste in storage at the Savannah River Site (SRS). In the late 1970's, the Department of Energy recognized that there were significant safety and cost advantages associated with immobilizing the high-level waste in a stable solid form. Several alternative waste forms were evaluated in terms of product quality and reliability of fabrication. This evaluation led to a decision to build the Defense Waste Processing Facility (DWPF) at SRS to convert the easily dispersed liquid waste to borosilicate glass. In accordance with the NEPA (National Environmental Policy Act) process, an Environmental Impact Statement was prepared for the facility, as well as an Environmental Assessment of the alternative waste forms, and issuance of a Record of Decision (in December, 1982) on the waste form. The Department of Energy, recognizing that start-up of the DWPF would considerably precede licensing of a repository, instituted a Waste Acceptance Process to ensure that these canistered waste forms would be acceptable for eventual disposal at a federal repository. This report is a revision of the DWPF compliance plan.

  4. DWPF waste form compliance plan (Draft Revision)

    SciTech Connect (OSTI)

    Plodinec, M.J.; Marra, S.L.

    1991-12-31

    The Department of Energy currently has over 100 million liters of high-level radioactive waste in storage at the Savannah River Site (SRS). In the late 1970`s, the Department of Energy recognized that there were significant safety and cost advantages associated with immobilizing the high-level waste in a stable solid form. Several alternative waste forms were evaluated in terms of product quality and reliability of fabrication. This evaluation led to a decision to build the Defense Waste Processing Facility (DWPF) at SRS to convert the easily dispersed liquid waste to borosilicate glass. In accordance with the NEPA (National Environmental Policy Act) process, an Environmental Impact Statement was prepared for the facility, as well as an Environmental Assessment of the alternative waste forms, and issuance of a Record of Decision (in December, 1982) on the waste form. The Department of Energy, recognizing that start-up of the DWPF would considerably precede licensing of a repository, instituted a Waste Acceptance Process to ensure that these canistered waste forms would be acceptable for eventual disposal at a federal repository. This report is a revision of the DWPF compliance plan.

  5. Directory of energy data collection forms. Forms in use as of October 1995

    SciTech Connect (OSTI)

    1996-01-01

    This is an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy (DOE). This directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry. Forms designed to collect energy information and used by the Energy Information Administration (EIA) as of October 1995 are included in this directory. For each form listed in this directory, an abstract is included that describes the form`s uses, its respondents, and the data collected. For the reader`s convenience in finding specific types of collections, several indices have been provided in this directory. A listing of the forms grouped by energy source and function begins on page 26. Beginning on page 38 are the publications derived from the collections, and on page 50, are the forms linked to general respondent categories.

  6. Forming aspheric optics by controlled deposition

    DOE Patents [OSTI]

    Hawryluk, Andrew M.

    1998-01-01

    An aspheric optical element formed by depositing material onto a spherical surface of an optical element by controlled deposition to form an aspheric surface of desired shape. A reflecting surface, single or multi-layer, can then be formed on the aspheric surface by evaporative or sputtering techniques. Aspheric optical elements are suitable for deep ultra-violet (UV) and x-ray wavelengths. The reflecting surface may, for example, be a thin (.about.100 nm) layer of aluminum, or in some cases the deposited modifying layer may function as the reflecting surface. For certain applications, multi-layer reflective surfaces may be utilized, such as chromium-carbon or tungsten-carbon multi-layer, with the number of layers and thickness being determined by the intended application.

  7. Forming aspheric optics by controlled deposition

    DOE Patents [OSTI]

    Hawryluk, A.M.

    1998-04-28

    An aspheric optical element is disclosed formed by depositing material onto a spherical surface of an optical element by controlled deposition to form an aspheric surface of desired shape. A reflecting surface, single or multi-layer, can then be formed on the aspheric surface by evaporative or sputtering techniques. Aspheric optical elements are suitable for deep ultra-violet (UV) and x-ray wavelengths. The reflecting surface may, for example, be a thin ({approx}100 nm) layer of aluminum, or in some cases the deposited modifying layer may function as the reflecting surface. For certain applications, multi-layer reflective surfaces may be utilized, such as chromium-carbon or tungsten-carbon multi-layer, with the number of layers and thickness being determined by the intended application. 4 figs.

  8. Oligomer functionalized nanotubes and composites formed therewith

    DOE Patents [OSTI]

    Zettl, Alexander K; Sainsbury, Toby; Frechet, Jean M.J.

    2014-03-18

    Disclosed herein is a sequential functionalization methodology for the covalent modification of nanotubes with between one and four repeat units of a polymer. Covalent attachment of oligomer units to the surface of nanotubes results in oligomer units forming an organic sheath around the nanotubes, polymer-functionalized-nanotubes (P-NTs). P-NTs possess chemical functionality identical to that of the functionalizing polymer, and thus provide nanoscale scaffolds which may be readily dispersed within a monomer solution and participate in the polymerization reaction to form a polymer-nanotube/polymer composite. Formation of polymer in the presence of P-NTs leads to a uniform dispersion of nanotubes within the polymer matrix, in contrast to aggregated masses of nanotubes in the case of pristine-NTs. The covalent attachment of oligomeric units to the surface of nanotubes represents the formation of a functional nanoscale building block which can be readily dispersed and integrated within the polymer to form a novel composite material.

  9. Method of forming an HTS article

    DOE Patents [OSTI]

    Bhattacharya, Raghu N.; Zhang, Xun; Selvamanickam, Venkat

    2014-08-19

    A method of forming a superconducting article includes providing a substrate tape, forming a superconducting layer overlying the substrate tape, and depositing a capping layer overlying the superconducting layer. The capping layer includes a noble metal and has a thickness not greater than about 1.0 micron. The method further includes electrodepositing a stabilizer layer overlying the capping layer using a solution that is non-reactive to the superconducting layer. The superconducting layer has an as-formed critical current I.sub.C(AF) and a post-stabilized critical current I.sub.C(PS). The I.sub.C(PS) is at least about 95% of the I.sub.C(AF).

  10. Hadronic form factors in kaon photoproduction

    SciTech Connect (OSTI)

    Syukurilla, L. Mart, T.

    2014-09-25

    We have revisited the effect of hadronic form factors in kaon photoproduction process by utilizing an isobaric model developed for kaon photoproduction off the proton. The model is able to reproduce the available experimental data nicely as well as to reveal the origin of the second peak in the total cross section, which was the main source of confusion for decades. Different from our previous study, in the present work we explore the possibility of using different hadronic form factors in each of the K?N vertices. The use of different hadronic form factors, e.g. dipole, Gaussian, and generalized dipole, has been found to produce a more flexible isobar model, which can provide a significant improvement in the model.

  11. Chiral extrapolation of nucleon magnetic form factors

    SciTech Connect (OSTI)

    P. Wang; D. Leinweber; A. W. Thomas; R.Young

    2007-04-01

    The extrapolation of nucleon magnetic form factors calculated within lattice QCD is investigated within a framework based upon heavy baryon chiral effective-field theory. All one-loop graphs are considered at arbitrary momentum transfer and all octet and decuplet baryons are included in the intermediate states. Finite range regularization is applied to improve the convergence in the quark-mass expansion. At each value of the momentum transfer (Q{sup 2}), a separate extrapolation to the physical pion mass is carried out as a function of m{sub {pi}} alone. Because of the large values of Q{sup 2} involved, the role of the pion form factor in the standard pion-loop integrals is also investigated. The resulting values of the form factors at the physical pion mass are compared with experimental data as a function of Q{sup 2} and demonstrate the utility and accuracy of the chiral extrapolation methods presented herein.

  12. Atomization methods for forming magnet powders

    DOE Patents [OSTI]

    Sellers, Charles H.; Branagan, Daniel J.; Hyde, Timothy A.

    2000-01-01

    The invention encompasses methods of utilizing atomization, methods for forming magnet powders, methods for forming magnets, and methods for forming bonded magnets. The invention further encompasses methods for simulating atomization conditions. In one aspect, the invention includes an atomization method for forming a magnet powder comprising: a) forming a melt comprising R.sub.2.1 Q.sub.13.9 B.sub.1, Z and X, wherein R is a rare earth element; X is an element selected from the group consisting of carbon, nitrogen, oxygen and mixtures thereof; Q is an element selected from the group consisting of Fe, Co and mixtures thereof; and Z is an element selected from the group consisting of Ti, Zr, Hf and mixtures thereof; b) atomizing the melt to form generally spherical alloy powder granules having an internal structure comprising at least one of a substantially amorphous phase or a substantially nanocrystalline phase; and c) heat treating the alloy powder to increase an energy product of the alloy powder; after the heat treatment, the alloy powder comprising an energy product of at least 10 MGOe. In another aspect, the invention includes a magnet comprising R, Q, B, Z and X, wherein R is a rare earth element; X is an element selected from the group consisting of carbon, nitrogen, oxygen and mixtures thereof; Q is an element selected from the group consisting of Fe, Co and mixtures thereof; and Z is an element selected from the group consisting of Ti, Zr, Hf and mixtures thereof; the magnet comprising an internal structure comprising R.sub.2.1 Q.sub.13.9 B.sub.1.

  13. Spray-formed tooling and aluminum strip

    SciTech Connect (OSTI)

    McHugh, K.M.

    1995-11-01

    Spray forming is an advanced materials processing technology that converts a bulk liquid metal to a near-net-shape solid by depositing atomized droplets onto a suitably shaped substrate. By combining rapid solidification processing with product shape control, spray forming can reduce manufacturing costs while improving product quality. De Laval nozzles offer an alternative method to the more conventional spray nozzle designs. Two applications are described: high-volume production of aluminum alloy strip, and the production of specialized tooling, such as injection molds and dies, for rapid prototyping.

  14. High temperature methods for forming oxidizer fuel

    DOE Patents [OSTI]

    Bravo, Jose Luis (Houston, TX)

    2011-01-11

    A method of treating a formation fluid includes providing formation fluid from a subsurface in situ heat treatment process. The formation fluid is separated to produce a liquid stream and a first gas stream. The first gas stream includes carbon dioxide, hydrogen sulfide, hydrocarbons, hydrogen or mixtures thereof. Molecular oxygen is separated from air to form a molecular oxygen stream comprising molecular oxygen. The first gas stream is combined with the molecular oxygen stream to form a combined stream comprising molecular oxygen and the first gas stream. The combined stream is provided to one or more downhole burners.

  15. DVU Featured Training & Events Form

    Energy Savers [EERE]

    Featured Training & Events Form Please complete this form in its entirety and email to AskTheDvu@hq.doe.gov 1. Course Title: 2. Course Start/End Date: 3. Start/End Time (Time zone required): 4. Registration Link: Website Name and URL Link: 5. CHRIS Course Code & Session Number: If Applicable, Enter 6-Digit CHRIS Course Number 4-Digit CHRIS Session Number 6. Cost: 7. Course Type: (Ex: Live Webinar, Classroom, Online) 8. Course Location: Training Facility Address, Room # City & State

  16. Low sintering temperature glass waste forms for sequestering radioactive iodine

    DOE Patents [OSTI]

    Nenoff, Tina M.; Krumhansl, James L.; Garino, Terry J.; Ockwig, Nathan W.

    2012-09-11

    Materials and methods of making low-sintering-temperature glass waste forms that sequester radioactive iodine in a strong and durable structure. First, the iodine is captured by an adsorbant, which forms an iodine-loaded material, e.g., AgI, AgI-zeolite, AgI-mordenite, Ag-silica aerogel, ZnI.sub.2, CuI, or Bi.sub.5O.sub.7I. Next, particles of the iodine-loaded material are mixed with powdered frits of low-sintering-temperature glasses (comprising various oxides of Si, B, Bi, Pb, and Zn), and then sintered at a relatively low temperature, ranging from 425.degree. C. to 550.degree. C. The sintering converts the mixed powders into a solid block of a glassy waste form, having low iodine leaching rates. The vitrified glassy waste form can contain as much as 60 wt % AgI. A preferred glass, having a sintering temperature of 500.degree. C. (below the silver iodide sublimation temperature of 500.degree. C.) was identified that contains oxides of boron, bismuth, and zinc, while containing essentially no lead or silicon.

  17. Superior Energy Performance Enrollment and Application Forms

    Broader source: Energy.gov [DOE]

    Enrollment and Application Forms for SEP Industrial Participants. The Superior Energy Performance® (SEP™) program, built on ISO 50001 framework, provides a globally recognized system that U.S. industrial facilities can use to improve their energy management and performance.

  18. Forming foam structures with carbon foam substrates

    DOE Patents [OSTI]

    Landingham, Richard L.; Satcher, Jr., Joe H.; Coronado, Paul R.; Baumann, Theodore F.

    2012-11-06

    The invention provides foams of desired cell sizes formed from metal or ceramic materials that coat the surfaces of carbon foams which are subsequently removed. For example, metal is located over a sol-gel foam monolith. The metal is melted to produce a metal/sol-gel composition. The sol-gel foam monolith is removed, leaving a metal foam.

  19. Active superconducting devices formed of thin films

    DOE Patents [OSTI]

    Martens, Jon S.; Beyer, James B.; Nordman, James E.; Hohenwarter, Gert K. G.

    1991-05-28

    Active superconducting devices are formed of thin films of superconductor which include a main conduction channel which has an active weak link region. The weak link region is composed of an array of links of thin film superconductor spaced from one another by voids and selected in size and thickness such that magnetic flux can propagate across the weak link region when it is superconducting. Magnetic flux applied to the weak link region will propagate across the array of links causing localized loss of superconductivity in the links and changing the effective resistance across the links. The magnetic flux can be applied from a control line formed of a superconducting film deposited coplanar with the main conduction channel and weak link region on a substrate. The devices can be formed of any type to superconductor but are particularly well suited to the high temperature superconductors since the devices can be entirely formed from coplanar films with no overlying regions. The devices can be utilized for a variety of electrical components, including switching circuits, amplifiers, oscillators and modulators, and are well suited to microwave frequency applications.

  20. Methods for forming wellbores in heated formations

    DOE Patents [OSTI]

    Guimerans, Rosalvina Ramona; Mansure, Arthur James

    2012-09-25

    A method for forming a wellbore in a heated formation includes flowing liquid cooling fluid to a bottom hole assembly in a wellbore in a heated formation. At least a portion of the liquid cooling fluid is vaporized at or near a region to be cooled. Vaporizing the liquid cooling fluid absorbs heat from the region to be cooled.

  1. Plate forming and break down pizza box

    DOE Patents [OSTI]

    Pantisano, Frank; Devine, Scott M.

    1992-01-01

    A standard corrugated paper pizza box is provided with slit cuts cut through the top panel of the pizza box in a shape to form four circular serving plates with a beveled raised edge and cross slit cuts through the bottom panel of the pizza box separating the box into four essentially equal portions for easy disposal.

  2. Electronic Comment Form | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Electronic Comment Form Draft site-wide environmental impact statement for the continued operation of the DOE/NNSA Nevada National Security Site and off-site locations in the State of Nevada. DOE/NNSA will accept comments until December 2, 2011 Name * E-mail (optional) Organization Comment * Leave this field blank Submit

  3. Montana Surface Water Application for Beneficial Use (DNRC Form...

    Open Energy Info (EERE)

    for Beneficial Use (DNRC Form 600 GW) Citation Montana Department of Natural Resources & Conservation. Form: Montana Surface Water Application for Beneficial Use (DNRC Form 600...

  4. Montana Surface Water Application for Beneficial Use (DNRC Form...

    Open Energy Info (EERE)

    Beneficial Use (DNRC Form 600 SW) Citation Montana Department of Natural Resources and Conservation. Form: Montana Surface Water Application for Beneficial Use (DNRC Form 600...

  5. Microsoft Word - FORM46001.doc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FORM46001.doc Microsoft Word - FORM46001.doc PDF icon Microsoft Word - FORM46001.doc More Documents & Publications DOE F 4600.1 Archived Financial Assistance Letters American ...

  6. Report of International Electric Import/Export Data: Form OE...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Electric ImportExport Data: Form OE-781R Instructions Report of International Electric ImportExport Data: Form OE-781R Instructions Instructions for completing Form ...

  7. DOE Energy Taxation Forum - Registration Form | Department of Energy

    Energy Savers [EERE]

    Registration Form DOE Energy Taxation Forum - Registration Form PDF icon Registration Form Taxation Forum_0.pdf More Documents & Publications DOE Energy Taxation Forum - Travel Fact Sheet

  8. Report of Waste Discharge application (Form 200) | Open Energy...

    Open Energy Info (EERE)

    Waste Discharge application (Form 200) Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Report of Waste Discharge application (Form 200) Abstract Persons...

  9. Annual Electric Utility Data - Form EIA-906 Database

    U.S. Energy Information Administration (EIA) Indexed Site

    Detailed data files > Historic Form EIA-906 Historic Form EIA-906 Detailed Data with previous form data (EIA-759) Historic electric utility data files include information on net ...

  10. Directory of energy data collection forms: Forms in use as of October 1994

    SciTech Connect (OSTI)

    Not Available

    1994-12-15

    This 18th edition directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry; selected public use forms currently used as basic energy information gathering tools by DOE are covered. For each form, an abstract is included that describes the form`s uses, its respondents, and the data collected. Also shown are frequently requested items: energy sources and functions covered by the form, general categories of respondents, collection frequency, public laws and regulations, reporting requirement, name and phone number of the data collection manager, and the publications resulting from the data collection. Indexes, arranged according to energy source/function, publications, respondent categories, former EIA form number designations, and collection authorities, are provided.

  11. Crystalline Ceramic Waste Forms: Comparison Of Reference Process For Ceramic Waste Form Fabrication

    SciTech Connect (OSTI)

    Brinkman, K. S.; Marra, J. C.; Amoroso, J.; Tang, M.

    2013-08-22

    The research conducted in this work package is aimed at taking advantage of the long term thermodynamic stability of crystalline ceramics to create more durable waste forms (as compared to high level waste glass) in order to reduce the reliance on engineered and natural barrier systems. Durable ceramic waste forms that incorporate a wide range of radionuclides have the potential to broaden the available disposal options and to lower the storage and disposal costs associated with advanced fuel cycles. Assemblages of several titanate phases have been successfully demonstrated to incorporate radioactive waste elements, and the multiphase nature of these materials allows them to accommodate variation in the waste composition. Recent work has shown that they can be produced from a melting and crystallization process. The objective of this report is to explore the phase formation and microstructural differences between lab scale melt processing in varying gas environments with alternative densification processes such as Hot Pressing (HP) and Spark Plasma Sintering (SPS). The waste stream used as the basis for the development and testing is a simulant derived from a combination of the projected Cs/Sr separated stream, the Trivalent Actinide - Lanthanide Separation by Phosphorous reagent Extraction from Aqueous Komplexes (TALSPEAK) waste stream consisting of lanthanide fission products, the transition metal fission product waste stream resulting from the transuranic extraction (TRUEX) process, and a high molybdenum concentration with relatively low noble metal concentrations. Melt processing as well as solid state sintering routes SPS and HP demonstrated the formation of the targeted phases; however differences in microstructure and elemental partitioning were observed. In SPS and HP samples, hollandite, pervoskite/pyrochlore, zirconolite, metallic alloy and TiO{sub 2} and Al{sub 2}O{sub 3} were observed distributed in a network of fine grains with small residual pores. The titanate phases that incorporate M{sup +3} rare earth elements were observed to be distinct phases (ex. Nd{sub 2}Ti{sub 2}O{sub 7}) with less degree of substitution as compared to the more homogeneous melt processed samples where a high degree of substitution and variation of composition within grains was observed. Liquid phase sintering was enhanced in reducing gas environments and resulted in large (10-200 microns) irregular shaped grains along with large voids associated with the melt process; SPS and HP samples exhibited finer grain size with smaller voids. Metallic alloys were observed in the bulk of the sample for SPS and HP samples, but were found at the bottom of the crucible in melt processed trials. These results indicate that for a first melter trial, the targeted phases can be formed in air by utilizing Ti/TiO{sub 2} additives which aid phase formation and improve the electrical conductivity. Ultimately, a melter run in reducing gas environments would be beneficial to study differences in phase formation and elemental partitioning.

  12. Tensile-stressed microelectromechanical apparatus and tiltable micromirrors formed therefrom

    DOE Patents [OSTI]

    Fleming, James G.

    2007-01-09

    A microelectromechanical (MEM) apparatus is disclosed which includes a pair of tensile-stressed actuators suspending a platform above a substrate to tilt the platform relative to the substrate. A tensile stress built into the actuators initially tilts the platform when a sacrificial material used in fabrication of the MEM apparatus is removed. Further tilting of the platform can occur with a change in the ambient temperature about the MEM apparatus, or by applying a voltage to one or both of the tensile-stressed actuators. The MEM apparatus can be used to form a tiltable micromirror or an array of such devices, and also has applications for thermal management within satellites.

  13. Form RW-U: Utilities | Open Energy Information

    Open Energy Info (EERE)

    Form RW-U: Utilities Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Form RW-U: Utilities Abstract This document is a required supplemental form for...

  14. Form:Community Energy Tools | Open Energy Information

    Open Energy Info (EERE)

    Form Edit History Form:Community Energy Tools Jump to: navigation, search This is the 'Community Energy Tools' form. To add a page with this form, enter the page name below; if a...

  15. OMB83 D Discontinuance Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OMB83 D Discontinuance Form OMB83 D Discontinuance Form PDF icon omb83-d discontinuace form.pdf More Documents & Publications OMB 83 C Paperwork Reduction Act Form Guidance for ...

  16. NEUP Foreign Travel Request Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Form NEUP Foreign Travel Request Form File NEUP Foreign Travel Form 073112.docx More Documents & Publications DOE F 551.1 NEUP Student Travel Request Form HQ FNVA Questionnaire

  17. US-India FOA submission form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    US-India FOA submission form US-India FOA submission form US-India FOA PDF icon US-India FOA submission form More Documents & Publications Request for Mediation Intake Form ...

  18. TCEQ-CoreDataForm | Open Energy Information

    Open Energy Info (EERE)

    TCEQ-CoreDataForm Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: TCEQ-CoreDataForm Abstract This is the core data form from the Texas Commission on...

  19. W4, Federal Withholding Tax Form | Department of Energy

    Energy Savers [EERE]

    W4, Federal Withholding Tax Form W4, Federal Withholding Tax Form PDF icon W4, Federal Withholding Tax Form More Documents & Publications Employee In-Processing Forms DOE F 1500.7...

  20. Contour forming of metals by laser peening

    DOE Patents [OSTI]

    Hackel, Lloyd; Harris, Fritz

    2002-01-01

    A method and apparatus are provided for forming shapes and contours in metal sections by generating laser induced compressive stress on the surface of the metal workpiece. The laser process can generate deep compressive stresses to shape even thick components without inducing unwanted tensile stress at the metal surface. The precision of the laser-induced stress enables exact prediction and subsequent contouring of parts. A light beam of 10 to 100 J/pulse is imaged to create an energy fluence of 60 to 200 J/cm.sup.2 on an absorptive layer applied over a metal surface. A tamping layer of water is flowed over the absorptive layer. The absorption of laser light causes a plasma to form and consequently creates a shock wave that induces a deep residual compressive stress into the metal. The metal responds to this residual stress by bending.

  1. Titanium sealing glasses and seals formed therefrom

    DOE Patents [OSTI]

    Brow, Richard K.; McCollister, Howard L.; Phifer, Carol C.; Day, Delbert E.

    1997-01-01

    Alkaline-earth lanthanoborate sealing-glass compositions containing CaO, La.sub.2 O.sub.3, B.sub.2 O.sub.3, TiO.sub.2 and Al.sub.2 O.sub.3 in various combinations of mole-% are provided. These sealing-glass compositions are useful for forming hermetic glass-to-metal seals with titanium and titanium alloys that have a high aqueous durability for component or device applications requiring exposure to moisture, water or body fluids. Particular applications of the titanium sealing-glass compositions include forming glass-to-metal seals for lithium batteries and implanted biomedical devices (e.g. batteries, pacemakers, defibrillators, pumps).

  2. Titanium sealing glasses and seals formed therefrom

    DOE Patents [OSTI]

    Brow, R.K.; McCollister, H.L.; Phifer, C.C.; Day, D.E.

    1997-12-02

    Alkaline-earth lanthanoborate sealing-glass compositions containing CaO, La{sub 2}O{sub 3}, B{sub 2}O{sub 3}, TiO{sub 2} and Al{sub 2}O{sub 3} in various combinations of mole-% are provided. These sealing-glass compositions are useful for forming hermetic glass-to-metal seals with titanium and titanium alloys that have a high aqueous durability for component or device applications requiring exposure to moisture, water or body fluids. Particular applications of the titanium sealing-glass compositions include forming glass-to-metal seals for lithium batteries and implanted biomedical devices (e.g. batteries, pacemakers, defibrillators, pumps). 2 figs.

  3. Page 10, Security Forms and Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    10 of 11 Previous Page Security Forms and Information Building Access and DOE Badges Employees entering DOE facilities must have either a DOE photo identification Security Badge or a DOE Temporary Badge. Either badge must be displayed above the waist in plain view at all times while in DOE facilities. Employees must present said badges to Protective Force personnel for inspection prior to entry into the facilities. You should have been provided instruction by email regarding training that must

  4. New Species of Cyanobacteria Forms Intracellular Carbonates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Solicitations There is no open solicitation at this time. You can look for other federal assistance grants by visiting www.grants.gov off site link

    New Solicitations National Laser Users' Facility Grant Program New Solicitations There is no open solicitation at this time. You can look for other federal assistance grants by visiting www.grants.gov

    New Species of Cyanobacteria Forms Intracellular Carbonates Print A new species of cyanobacteria-photosynthetic bacteria that occupy a

  5. Low-level-waste-form criteria

    SciTech Connect (OSTI)

    Barletta, R.E.; Davis, R.E.

    1982-01-01

    Efforts in five areas are reported: technical considerations for a high-integrity container for resin wastes; permissible radionuclide loadings for organic ion exchange resin wastes; technical factors affecting low-level waste form acceptance requirements of the proposed 10 CFR 61 and draft BTP; modeling of groundwater transport; and analysis of soils from low-level waste disposal sites (Barnwell, Hanford, and Sheffield). (DLC)

  6. Microsoft Word - 2016 Sponsorship Form.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Security LLC for DOE/NNSA Los Alamos National Laboratory Postdoc Career Fair 2016 Sponsorship Form Company information Name of Company: ___________________________________________________ Address: Company contact information regarding sponsorship Name: Email: Phone: Amount of sponsorship: __________ Method of payment Method 1: Your organization may send us a check accompanied by a letter specifically stating the check number, what the funds will be used for, and that the excess will be returned.

  7. Measurement of the ??*?? and ??*??' transition form factors

    SciTech Connect (OSTI)

    del Amo Sanchez, P.; Lees, J. P.; Poireau, V.; Prencipe, E.; Tisserand, V.; GarraTico, J.; Grauges, E.; Martinelli, M.; Milanes, D. A.; Palano, A.; Pappagallo, M.; Eigen, G.; Stugu, B.; Sun, L.; Brown, D. N.; Kerth, L. T.; Kolomensky, Yu.?G.; Lynch, G.; Osipenkov, I. L.; Koch, H.; Schroeder, T.; Asgeirsson, D. J.; Hearty, C.; Mattison, T. S.; McKenna, J. A.; Khan, A.; Blinov, V. E.; Botov, A. A.; Buzykaev, A. R.; Druzhinin, V. P.; Golubev, V. B.; Kravchenko, E. A.; Onuchin, A. P.; Serednyakov, S. I.; Skovpen, Yu.?I.; Solodov, E. P.; Todyshev, K.?Yu.; Yushkov, A. N.; Bondioli, M.; Curry, S.; Kirkby, D.; Lankford, A. J.; Mandelkern, M.; Martin, E. C.; Stoker, D. P.; Atmacan, H.; Gary, J. W.; Liu, F.; Long, O.; Vitug, G. M.; Campagnari, C.; Hong, T. M.; Kovalskyi, D.; Richman, J. D.; West, C. A.; Eisner, A. M.; Heusch, C. A.; Kroseberg, J.; Lockman, W. S.; Martinez, A. J.; Schalk, T.; Schumm, B. A.; Seiden, A.; Winstrom, L. O.; Cheng, C. H.; Doll, D. A.; Echenard, B.; Hitlin, D. G.; Ongmongkolkul, P.; Porter, F. C.; Rakitin, A. Y.; Andreassen, R.; Dubrovin, M. S.; Meadows, B. T.; Sokoloff, M. D.; Bloom, P. C.; Ford, W. T.; Gaz, A.; Nagel, M.; Nauenberg, U.; Smith, J. G.; Wagner, S. R.; Ayad, R.; Toki, W. H.; Jasper, H.; Petzold, A.; Spaan, B.; Kobel, M. J.; Schubert, K. R.; Schwierz, R.; Bernard, D.; Verderi, M.; Clark, P. J.; Playfer, S.; Watson, J. E.; Andreotti, M.; Bettoni, D.; Bozzi, C.; Calabrese, R.; Cecchi, A.; Cibinetto, G.; Fioravanti, E.; Franchini, P.; Garzia, I.; Luppi, E.; Munerato, M.; Negrini, M.; Petrella, A.; Piemontese, L.; Baldini-Ferroli, R.; Calcaterra, A.; de Sangro, R.; Finocchiaro, G.; Nicolaci, M.; Pacetti, S.; Patteri, P.; Peruzzi, I. M.; Piccolo, M.; Rama, M.; Zallo, A.; Contri, R.; Guido, E.; Lo Vetere, M.; Monge, M. R.; Passaggio, S.; Patrignani, C.; Robutti, E.; Bhuyan, B.; Prasad, V.; Lee, C. L.; Morii, M.; Edwards, A. J.; Adametz, A.; Marks, J.; Uwer, U.; Bernlochner, F. U.; Ebert, M.; Lacker, H. M.; Lueck, T.; Volk, A.; Dauncey, P. D.; Tibbetts, M.; Behera, P. K.; Mallik, U.; Chen, C.; Cochran, J.; Crawley, H. B.; Meyer, W. T.; Prell, S.; Rosenberg, E. I.; Rubin, A. E.; Gritsan, A. V.; Guo, Z. J.; Arnaud, N.; Davier, M.; Derkach, D.; Firmino da Costa, J.; Grosdidier, G.; Le Diberder, F.; Lutz, A. M.; Malaescu, B.; Perez, A.; Roudeau, P.; Schune, M. H.; Serrano, J.; Sordini, V.; Stocchi, A.; Wang, L.; Wormser, G.; Lange, D. J.; Wright, D. M.; Bingham, I.; Chavez, C. A.; Coleman, J. P.; Fry, J. R.; Gabathuler, E.; Hutchcroft, D. E.; Payne, D. J.; Touramanis, C.; Bevan, A. J.; Di Lodovico, F.; Sacco, R.; Sigamani, M.; Cowan, G.; Paramesvaran, S.; Wren, A. C.; Brown, D. N.; Davis, C. L.; Denig, A. G.; Fritsch, M.; Gradl, W.; Hafner, A.; Alwyn, K. E.; Bailey, D.; Barlow, R. J.; Jackson, G.; Lafferty, G. D.; Anderson, J.; Cenci, R.; Jawahery, A.; Roberts, D. A.; Simi, G.; Tuggle, J. M.; Dallapiccola, C.; Salvati, E.; Cowan, R.; Dujmic, D.; Sciolla, G.; Zhao, M.; Lindemann, D.; Patel, P. M.; Robertson, S. H.; Schram, M.; Biassoni, P.; Lazzaro, A.; Lombardo, V.; Palombo, F.; Stracka, S.; Cremaldi, L.; Godang, R.; Kroeger, R.; Sonnek, P.; Summers, D. J.; Nguyen, X.; Simard, M.; Taras, P.; De Nardo, G.; Monorchio, D.; Onorato, G.; Sciacca, C.; Raven, G.; Snoek, H. L.; Jessop, C. P.; Knoepfel, K. J.; LoSecco, J. M.; Wang, W. F.; Corwin, L. A.; Honscheid, K.; Kass, R.; Blount, N. L.; Brau, J.; Frey, R.; Igonkina, O.; Kolb, J. A.; Rahmat, R.; Sinev, N. B.; Strom, D.; Strube, J.; Torrence, E.; Castelli, G.; Feltresi, E.; Gagliardi, N.; Margoni, M.; Morandin, M.; Posocco, M.; Rotondo, M.; Simonetto, F.; Stroili, R.; Ben-Haim, E.; Bomben, M.; Bonneaud, G. R.; Briand, H.; Calderini, G.; Chauveau, J.; Hamon, O.; Leruste, Ph.; Marchiori, G.; Ocariz, J.; Prendki, J.; Sitt, S.; Biasini, M.; Manoni, E.; Rossi, A.; Angelini, C.; Batignani, G.; Bettarini, S.; Carpinelli, M.; Casarosa, G.; Cervelli, A.; Forti, F.; Giorgi, M. A.; Lusiani, A.; Neri, N.; Paoloni, E.; Rizzo, G.; Walsh, J. J.; LopesPegna, D.; Lu, C.; Olsen, J.; Smith, A. J. S.; Telnov, A. V.; Anulli, F.; Baracchini, E.; Cavoto, G.; Faccini, R.; Ferrarotto, F.; Ferroni, F.; Gaspero, M.; LiGioi, L.; Mazzoni, M. A.; Piredda, G.; Renga, F.; Buenger, C.; Hartmann, T.; Leddig, T.; Schrder, H.; Waldi, R.; Adye, T.; Olaiya, E. O.; Wilson, F. F.; Emery, S.; Hamel de Monchenault, G.; Vasseur, G.; Yche, Ch.; Allen, M. T.; Aston, D.; Bard, D. J.; Bartoldus, R.; Benitez, J. F.; Cartaro, C.; Convery, M. R.; Dorfan, J.; Dubois-Felsmann, G. P.; Dunwoodie, W.; Field, R. C.; FrancoSevilla, M.; Fulsom, B. G.; Gabareen, A. M.; Graham, M. T.; Grenier, P.; Hast, C.; Innes, W. R.; Kelsey, M. H.; Kim, H.; Kim, P.; Kocian, M. L.; Leith, D. W. G. S.; Lewis, P.; Li, S.; Lindquist, B.; Luitz, S.; Luth, V.; Lynch, H. L.

    2011-09-06

    We study the reactions e?e??e?e??(') in the single-tag mode and measure the ??*??(') transition form factors in the momentum-transfer range from 4 to 40 GeV. The analysis is based on 469 fb? of integrated luminosity collected at PEP-II with the BABAR detector at e?e? center-of-mass energies near 10.6 GeV.

  8. LANSCE Training Office Process Improvement Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Training Office Process Improvement Form You recently contacted our training service department. We want to assure that you're satisfied with our service. Please complete this short survey. Your feedback will be used to improve our service. How did you contact the TA-53 Training office for training? In Person Telephone E-Mail Response Time What was the reason for your request? Badge reader access Proctoring Training Report/Status Other______________ The Training Office handled my request

  9. Method for forming electrically charged laser targets

    DOE Patents [OSTI]

    Goodman, Ronald K.; Hunt, Angus L.

    1979-01-01

    Electrically chargeable laser targets and method for forming such charged targets in order to improve their guidance along a predetermined desired trajectory. This is accomplished by the incorporation of a small amount of an additive to the target material which will increase the electrical conductivity thereof, and thereby enhance the charge placed upon the target material for guidance thereof by electrostatic or magnetic steering mechanisms, without adversely affecting the target when illuminated by laser energy.

  10. Form W-9 (Rev. December 2011)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1) Department of the Treasury Internal Revenue Service Request for Taxpayer Identification Number and Certification Give Form to the requester. Do not send to the IRS. Print or type See Specific Instructions on page 2. Name (as shown on your income tax return) Business name/disregarded entity name, if different from above Check appropriate box for federal tax classification: Individual/sole proprietor C Corporation S Corporation Partnership Trust/estate Limited liability company. Enter the tax

  11. Form W-9 (Rev. December 2014)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4) Department of the Treasury Internal Revenue Service Request for Taxpayer Identification Number and Certification Give Form to the requester. Do not send to the IRS. Print or type See Specific Instructions on page 2. 1 Name (as shown on your income tax return). Name is required on this line; do not leave this line blank. 2 Business name/disregarded entity name, if different from above 3 Check appropriate box for federal tax classification; check only one of the following seven boxes:

  12. DOE - NNSA/NFO -- Feedback Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ask a Question / Feedback U.S. DOE/NNSA - Nevada Field Office Ask a Question / Feedback Your suggestions and comments pertaining to this website are greatly appreciated. Please use the form provided below to submit a question, comment, or problem about this website. You may also directly email the Webmaster for technical problems. Our policy is to reply to inquiries within 48 hours during normal business days. In accordance with the Privacy Statement, No personal information is collected about

  13. DOE - NNSA/NFO -- Feedback Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ask a Question / Feedback U.S. DOE/NNSA - Nevada Field Office Ask a Question / Feedback Your suggestions and comments pertaining to this website are greatly appreciated. Please use the form provided below to submit a question, comment, or problem about this website. You may also directly email the Webmaster for technical problems. Our policy is to reply to inquiries within 48 hours during normal business days. In accordance with the Privacy Statement, No personal information is collected about

  14. Ribosome engineering to promote new crystal forms

    SciTech Connect (OSTI)

    Selmer, Maria; Gao, Yong-Gui; Weixlbaumer, Albert; Ramakrishnan, V.

    2012-05-01

    Truncation of ribosomal protein L9 in T. thermophilus allows the generation of new crystal forms and the crystallization of ribosomeGTPase complexes. Crystallographic studies of the ribosome have provided molecular details of protein synthesis. However, the crystallization of functional complexes of ribosomes with GTPase translation factors proved to be elusive for a decade after the first ribosome structures were determined. Analysis of the packing in different 70S ribosome crystal forms revealed that regardless of the species or space group, a contact between ribosomal protein L9 from the large subunit and 16S rRNA in the shoulder of a neighbouring small subunit in the crystal lattice competes with the binding of GTPase elongation factors to this region of 16S rRNA. To prevent the formation of this preferred crystal contact, a mutant strain of Thermus thermophilus, HB8-MRCMSAW1, in which the ribosomal protein L9 gene has been truncated was constructed by homologous recombination. Mutant 70S ribosomes were used to crystallize and solve the structure of the ribosome with EF-G, GDP and fusidic acid in a previously unobserved crystal form. Subsequent work has shown the usefulness of this strain for crystallization of the ribosome with other GTPase factors.

  15. Method for forming suspended micromechanical structures

    DOE Patents [OSTI]

    Fleming, James G. (Albuquerque, NM)

    2000-01-01

    A micromachining method is disclosed for forming a suspended micromechanical structure from {111} crystalline silicon. The micromachining method is based on the use of anisotropic dry etching to define lateral features of the structure which are etched down into a {111}-silicon substrate to a first etch depth, thereby forming sidewalls of the structure. The sidewalls are then coated with a protection layer, and the substrate is dry etched to a second etch depth to define a spacing of the structure from the substrate. A selective anisotropic wet etchant (e.g. KOH, EDP, TMAH, NaOH or CsOH) is used to laterally undercut the structure between the first and second etch depths, thereby forming a substantially planar lower surface of the structure along a {111} crystal plane that is parallel to an upper surface of the structure. The lateral extent of undercutting by the wet etchant is controlled and effectively terminated by either timing the etching, by the location of angled {111}-silicon planes or by the locations of preformed etch-stops. This present method allows the formation of suspended micromechanical structures having large vertical dimensions and large masses while allowing for detailed lateral features which can be provided by dry etch definition. Additionally, the method of the present invention is compatible with the formation of electronic circuitry on the substrate.

  16. Waste Form Degradation Model Integration for Engineered Materials...

    Office of Environmental Management (EM)

    Waste Form Degradation Model Integration for Engineered Materials Performance Waste Form Degradation Model Integration for Engineered Materials Performance The collaborative ...

  17. When Function Follows Form: Plastic Solar Cells | ANSER Center...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    When Function Follows Form: Plastic Solar Cells Home > Research > ANSER Research Highlights > When Function Follows Form: Plastic Solar Cells...

  18. Technical Qualification Program Administrative Forms | Department of Energy

    Energy Savers [EERE]

    Administrative Forms Technical Qualification Program Administrative Forms TQP Position Evaluation Questionnaire Form and TQP Resource Management Questionnaire Form PDF icon TQP Position Evaluation Questionnaire Form PDF icon TQP Resource Management Questionnaire Form More Documents & Publications Technical Qualification Program Reaccreditation Report - Sandia Site Office Technical Qualification Program Self-Assessment Report - Oak Ridge Office - 2014 Technical Qualification Program

  19. Employee Assistance Self-ID Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Employee Assistance Self-ID Form Employee Assistance Self-ID Form Request Emergency Assistance Self-ID Form-HQ PDF icon Employee Assistance Self-ID Form More Documents & Publications DOE HQ Special Needs Assistance in an Emergency DOE Emergency Special Needs Self-Identification Form DOE Emergency Exercise Feedback Form

  20. System and method for accumulative double sided incremental forming

    DOE Patents [OSTI]

    Cao, Jian; Malhotra, Rajiv

    2015-10-27

    A forming system includes first and second tools, moving assemblies, and a control unit. The moving assemblies move the first tool and the second tool relative to the sheet. The control unit is configured to control movement of the first tool and the second tool by the one or more moving assemblies by moving at least one of the first tool or the second tool in a first deformation direction to deform the sheet, then moving the first and second tools laterally relative to the sheet to a subsequent location while engaging the sheet, then moving at least one of the first tool or the second tool in the first deformation direction or an opposite second deformation direction to deform the sheet, and then continue moving the first and second tools to deform the sheet in order to create a three-dimensional component from the sheet.