Sample records for not-for-profit organization formed

  1. MuseuM AssociAtes, inc. A 501(c)(3) not-For-Profit organization

    E-Print Network [OSTI]

    Missouri-Columbia, University of

    MuseuM AssociAtes, inc. A 501(c)(3) not-For-Profit organization in support of the Museum of Art on canvas (61.78) samuel H. Kress study collection (K1112) Printing provided by corporate sponsor ® MuseuM, May 3, 2014 For the benefit of the university of Missouri Museum of Art and Archaeology columbia

  2. ECO Canada (formerly known as CCHREI) is a not-for-profit organization that provides information and services in support of

    E-Print Network [OSTI]

    Fox, Michael

    1 · ECO Canada (formerly known as CCHREI) is a not-for-profit organization that provides information and services in support of the rapidly growing environmental profession. · ECO Canada acts up with certifications #12;2 #12;3 #12;4 · Canada produces over $18.5 billion in environmental goods

  3. The Center for Water-Energy Efficiency is a not-for-profit research and development unit at the University of California, Davis, leading innovations in

    E-Print Network [OSTI]

    California at Davis, University of

    The Center for Water-Energy Efficiency is a not-for-profit research and development unit at the University of California, Davis, leading innovations in water and energy efficient technologies and policies between water and energy and to use and allocate both more efficiently. Collaborating with partners

  4. MIENS Minimum Information about an ENvironmental Sequence and The GSC's Not-for-Profit (GSC8 Meeting)

    ScienceCinema (OSTI)

    Yilmaz, Pelin [Max Planck Institute - Bremen]; Kolker, Eugene [Seattle Childrens Hospital

    2011-04-29T23:59:59.000Z

    The Genomic Standards Consortium was formed in September 2005. It is an international, open-membership working body which promotes standardization in the description of genomes and the exchange and integration of genomic data. The 2009 meeting was an activity of a five-year funding Research Coordination Network from the National Science Foundation and was held at the DOE Joint Genome Institute with organizational support provided by the JGI and by the University of California - San Diego. Pelin Yilmaz of the Max Planck Institute-Bremen talks about the MIENS specification and Eugene Kolker of Seattle Children's Hospital discusses the GSC's non-for-profit at the Genomic Standards Consortium's 8th meeting at the DOE JGI in Walnut Creek, Calif. on Sept. 9, 2009

  5. The Meatless Monday Campaign is a not-for-profit organization in association with Johns Hopkins Bloomberg School of Public Health

    E-Print Network [OSTI]

    Boyce, Richard L.

    Strawberry Freeze 30 Oatmeal-Raisin Cookies 31 Light and Easy Mocha Cake 32 Tofu Cheesefake 32 Strawberry of red meat and high-fat dairy you eat, you're not just reducing the main source of unhealthy saturated. Stay away from meat and high-fat dairy, both of which are major sources of saturated fat. To help you

  6. Audit of Economic Development Grants and a Cooperative Agreement with East Tennessee Not-For-Profit Organizations, ER-B-97-01

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The FutureComments from TarasaName4Services Requirements Discussed In AUDIT OF

  7. Audit of Economic Development Grants and a Cooperative Agreement with East Tennessee Not-For-Profit Organizations, ER-B-97-01

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO OverviewAttachments Energy Ratings Council22-04 AuditEvaluation Report TheSpecialU.S. AUDIT

  8. Opportunities in the Public & Not for Profit

    E-Print Network [OSTI]

    could feasibly come under this umbrella term. If this is an issue which is particularly important to you://uk.oneworld.net/section/uk/jobs - search their ethical jobs and volunteer database www.business-humanrights.org independent organisation). Alternatively, enter the local authority name e.g. www.stockport.gov.uk To get an overview of potential

  9. Form:Organization | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualPropertyd8c-a9ae-f8521cbb8489Information HydroFontana,dataset name below to addOil form.

  10. STUDENT ORGANIZATION VEHICLE RENTAL FORM Use this form in conjunction with a vehicle reservation form to request a rental vehicle from University of Michigan

    E-Print Network [OSTI]

    Kirschner, Denise

    STUDENT ORGANIZATION VEHICLE RENTAL FORM Use this form in conjunction with a vehicle reservation form to request a rental vehicle from University of Michigan (U-M) Parking and Transportation Services Services to confirm vehicle availability before submitting a request. Form Instructions: Complete each

  11. Grid Cell Hexagonal Patterns Formed by Fast Self-Organized Learning Within Entorhinal Cortex

    E-Print Network [OSTI]

    Spence, Harlan Ernest

    integration; spatial navigation INTRODUCTION A Hierarchy of Self-Organizing Maps The discovery of grid cells how an entorhinal-hip- pocampal self-organizing map can learn the relationships between grid cellGrid Cell Hexagonal Patterns Formed by Fast Self-Organized Learning Within Entorhinal Cortex

  12. INTRODUCTION The heart, which is the first organ to form in the embryo,

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    INTRODUCTION The heart, which is the first organ to form in the embryo, provides a striking example, which already contains differentiated cardiomyocytes, forms an epithelial heart tube that undergoes of cardiac precursors, located in the anterior or secondary heart field, which contributes to the arterial

  13. Adhesive flexible barrier film, method of forming same, and organic electronic device including same

    SciTech Connect (OSTI)

    Blizzard, John Donald; Weidner, William Kenneth

    2013-02-05T23:59:59.000Z

    An adhesive flexible barrier film comprises a substrate and a barrier layer disposed on the substrate. The barrier layer is formed from a barrier composition comprising an organosilicon compound. The adhesive flexible barrier film also comprises an adhesive layer disposed on the barrier layer and formed from an adhesive composition. A method of forming the adhesive flexible barrier film comprises the steps of disposing the barrier composition on the substrate to form the barrier layer, disposing the adhesive composition on the barrier layer to form the adhesive layer, and curing the barrier layer and the adhesive layer. The adhesive flexible barrier film may be utilized in organic electronic devices.

  14. Flexible barrier film, method of forming same, and organic electronic device including same

    DOE Patents [OSTI]

    Blizzard, John; Tonge, James Steven; Weidner, William Kenneth

    2013-03-26T23:59:59.000Z

    A flexible barrier film has a thickness of from greater than zero to less than 5,000 nanometers and a water vapor transmission rate of no more than 1.times.10.sup.-2 g/m.sup.2/day at 22.degree. C. and 47% relative humidity. The flexible barrier film is formed from a composition, which comprises a multi-functional acrylate. The composition further comprises the reaction product of an alkoxy-functional organometallic compound and an alkoxy-functional organosilicon compound. A method of forming the flexible barrier film includes the steps of disposing the composition on a substrate and curing the composition to form the flexible barrier film. The flexible barrier film may be utilized in organic electronic devices.

  15. New Mexico 4-H Dog Agility Release Form I/we agree to hold the organizing committee, the organization (New Mexico 4-H, the New

    E-Print Network [OSTI]

    New Mexico 4-H Dog Agility Release Form I/we agree to hold the organizing committee, the organization (New Mexico 4-H, the New Mexico State University Cooperative Extension Services to abide by the rules as stated in the New Mexico State 4-H Dog Show rules. 4-H Member's Signature

  16. Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHall ATours, ProgramsFIRSTClean EnergyForms and

  17. Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.New MexicoFinancingProofWorkingEnergyGoForestFormationFormer Forms

  18. Isoreticular metal-organic frameworks, process for forming the same, and systematic design of pore size and functionality therein, with application for gas storage

    DOE Patents [OSTI]

    Yaghi, Omar M.; Eddaoudi, Mohamed; Li, Hailian; Kim, Jaheon; Rosi, Nathaniel

    2005-08-16T23:59:59.000Z

    An isoreticular metal-organic framework (IRMOF) and method for systematically forming the same. The method comprises the steps of dissolving at least one source of metal cations and at least one organic linking compound in a solvent to form a solution; and crystallizing the solution under predetermined conditions to form a predetermined IRMOF. At least one of functionality, dimension, pore size and free volume of the IRMOF is substantially determined by the organic linking compound.

  19. Process for producing organic products containing silicon, hydrogen, nitrogen, and carbon by the direct reaction between elemental silicon and organic amines and products formed thereby

    DOE Patents [OSTI]

    Pugar, E.A.; Morgan, P.E.D.

    1988-04-04T23:59:59.000Z

    A process is disclosed for producing, at a low temperature, a high purity organic reaction product consisting essentially of silicon, hydrogen, nitrogen, and carbon. The process comprises reacting together a particulate elemental high purity silicon with a high purity reactive amine reactant in a liquid state at a temperature of from about O/degree/C up to about 300/degree/C. A high purity silicon carbide/silicon nitride ceramic product can be formed from this intermediate product, if desired, by heating the intermediate product at a temperature of from about 1200-1700/degree/C for a period from about 15 minutes up to about 2 hours or the organic reaction product may be employed in other chemical uses.

  20. Laser induced damage of fused silica polished optics due to a droplet forming organic contaminant

    SciTech Connect (OSTI)

    Bien-Aime, Karell; Neauport, Jerome; Tovena-Pecault, Isabelle; Fargin, Evelyne; Labrugere, Christine; Belin, Colette; Couzi, Michel

    2009-04-20T23:59:59.000Z

    We report on the effect of organic molecular contamination on single shot laser induced damage density at the wavelength of 351 nm, with a 3 ns pulse length. Specific contamination experiments were made with dioctylphthalate (DOP) in liquid or gaseous phase, on the surface of fused silica polished samples, bare or solgel coated. Systematic laser induced damage was observed only in the case of liquid phase contamination. Different chemical and morphological characterization methods were used to identify and understand the damage process. We demonstrate that the contaminant morphology, rather than its physicochemical nature, can be responsible for the decrease of laser induced damage threshold of optics.

  1. Photodissociation of organic molecules in star-forming regions, III. Methanol

    E-Print Network [OSTI]

    S. Pilling; R. Neves; A. C. F. Santos; H. M. Boechat-Roberty

    2006-12-15T23:59:59.000Z

    The presence of methyl alcohol or methanol (CH$_3$OH) in several astrophysical environments has been characterized by its high abundance that depends on both the production rate and the destruction rate. In the present work, the photoionization and photodissociation processes of methanol have been experimentally studied, employing soft X-ray photons (100-310 eV) from a toroidal grating monochromator (TGM) beamline of the Brazilian Synchrotron Light Laboratory (LNLS). Mass spectra were obtained using the photoelectron photoion coincidence (PEPICO) method. Kinetic energy distribution and abundances for each ionic fragment have been obtained from the analysis of the corresponding peak shapes in the mass spectra. Absolute photoionization and photodissociation cross sections were also determined. We have found, among the channels leading to ionization, about 11-16% of CH$_3$OH survive the soft X-rays photons. This behavior, together with an efficient formation pathways, may be associated with the high column density observed in star-forming regions. The three main photodissociation pathways are represented by COH$^+$ (or HCO$^+$) ion release (with ejection of H$_2$ + H), the dissociation via C-O bond rupture (with strong charge retention preferentially on the methyl fragment) and the ejection of a single energetic (2-4 eV) proton. Since methanol is very abundant in star forming regions, the produced protons could be an alternative route to molecular hydrogenation or a trigger for secondary dissociation processes or even to promote extra heating of the environment.

  2. DIRECT DISPOSAL OF A RADIOACTIVE ORGANIC WASTE IN A CEMENTITIOUS WASTE FORM

    SciTech Connect (OSTI)

    Zamecnik, J; Alex Cozzi, A; Russell Eibling, R; Jonathan Duffey, J; Kim Crapse, K

    2007-02-22T23:59:59.000Z

    The disposition of {sup 137}Cs-containing tetraphenylborate (TPB) waste at the Savannah River Site (SRS) by immobilization in the cementitious waste form, or grout called ''saltstone'' was proposed as a straightforward, cost-effective method for disposal. Tests were performed to determine benzene release due to TPB decomposition in saltstone at several initial TPB concentrations and temperatures. The benzene release rates for simulants and radioactive samples were generally comparable at the same conditions. Saltstone monoliths with only the top surface exposed to air at 25 and 55 C at any tetraphenylborate concentration or at any temperature with 30 mg/L TPB gave insignificant releases of benzene. At higher TPB concentrations and 75 and 95 C, the benzene release could result in exceeding the Lower Flammable Limit in the saltstone vaults.

  3. Ordered quantum dot molecules and single quantum dots formed by self-organized anisotropic strain engineering

    SciTech Connect (OSTI)

    Lippen, T. van; Noetzel, R.; Hamhuis, G.J.; Wolter, J.H. [European Institute of Telecommunication Technologies/Communication Technology, Basic Research and Applications (eiTT/COBRA) Inter-University Research Institute, Eindhoven University of Technology, 5600 MB Eindhoven (Netherlands)

    2005-02-15T23:59:59.000Z

    An ordered lattice of lateral InAs quantum dot (QD) molecules is created by self-organized anisotropic strain engineering of an (In,Ga)As/GaAs superlattice (SL) template on GaAs(311)B by molecular-beam epitaxy, constituting a Turing pattern in solid state. The SL template and InAs QD growth conditions, such as the number of SL periods, growth temperatures, amount and composition of deposited (In,Ga)As, and insertion of Al-containing layers, are studied in detail for an optimized QD ordering within and among the InAs QD molecules on the SL template nodes, which is evaluated by atomic force microscopy. The average number of InAs QDs within the molecules is controlled by the thickness of the upper GaAs separation layer on the SL template and the (In,Ga)As growth temperature in the SL. The strain-correlated growth in SL template formation and QD ordering is directly confirmed by high-resolution x-ray diffraction. Ordered arrays of single InAs QDs on the SL template nodes are realized for elevated SL template and InAs QD growth temperatures together with the insertion of a second InAs QD layer. The InAs QD molecules exhibit strong photoluminescence (PL) emission up to room temperature. Temperature-dependent PL measurements exhibit an unusual behavior of the full width at half maximum, indicating carrier redistribution solely within the QD molecules.

  4. Please send this form with a job description questionnaire (JDQ) and organization chart of your area to lorid@brandeis.edu. If you have any questions, call Lori Dougherty at 781-736-3653. Thank you.

    E-Print Network [OSTI]

    Snider, Barry B.

    Please send this form with a job description questionnaire (JDQ) and organization chart of your. Please send this form with a job description questionnaire (JDQ) and organization chart of your area

  5. Advanced characterization of forms of chlorine, organic sulfur, and trace elements in available coals from operating Illinois mines. [Quarterly] technical report, September 1--November 30, 1994

    SciTech Connect (OSTI)

    Chou, M.I.M.; Demir, I.; Ruch, J.M. [Illinois State Geological Survey (United States)] [and others

    1994-12-31T23:59:59.000Z

    A set of 34 as-shipped coal samples from operating Illinois mines is available for this study to determine the forms of chlorine and sulfur and leachability of chlorine during wet grinding and froth flotation. The forms of chlorine may be inorganic, ionic, and organic. The forms of organic sulfur will include organic sulfide and thiophenic sulfur. Chlorine can be leached from coal during wet grinding. The potential for removal of chlorine from the samples during fine ({minus}200 mesh) and ultrafine ({minus}400 mesh) wet-grinding and during froth flotation designed primarily for removal of pyrite and ash will be determined. In addition, the organic/inorganic affinities of trace elements in as-shipped Illinois coals will be assessed so that the current physical coal cleaning results may be better interpreted.

  6. Early-stage star forming cloud cores in GLIMPSE Extended Green Objects (EGOs) as traced by organics pecies

    E-Print Network [OSTI]

    Ge, Jixing; Chen, Xi; Takahashi, S

    2014-01-01T23:59:59.000Z

    In order to investigate the physical and chemical properties of massive star forming cores in early stages, we analyse the excitation and abundance of four organic species, CH3OH, CH3OCH3, HCOOCH3 and CH3CH2CN, toward 29 Extended Green Object (EGO) cloud cores that were observed by our previous single dish spectral line survey. The EGO cloud cores are found to have similar methanol J_3-J_2 rotation temperatures of ~44 K, a typical linear size of ~0.036 pc, and a typical beam averaged methanol abundance of several 10^(-9) (the beam corrected value could reach several 10^(-7)). The abundances of the latter three species, normalized by that of methanol, are found to be correlated also across a large variety of clouds such as EGO cloud cores, hot corinos, massive hot cores and Galactic Center clouds. The chemical properties of the EGO cloud cores lie between that of hot cores and hot corinos. However, the abundances and abundance ratios of the four species can not be satisfactorily explained by recent chemical mo...

  7. Using finished compost is a way of returning organic matter to the soil in a usable form. Soil organic matter benefits plant growth by improving the moisture and nutrient-holding capacity of sandy soils, by

    E-Print Network [OSTI]

    New Hampshire, University of

    Using finished compost is a way of returning organic matter to the soil in a usable form. Soil and by helping prevent soil erosion. Think of compost primarily as a soil conditioner rather than a fertilizer will be necessary for adequate plant growth. A soil test will determine if compost-amended garden soil requires

  8. Energy level alignment in polymer organic solar cells at donor-acceptor planar junction formed by electrospray vacuum deposition

    SciTech Connect (OSTI)

    Kim, Ji-Hoon; Hong, Jong-Am; Kwon, Dae-Gyeon; Seo, Jaewon; Park, Yongsup, E-mail: parky@khu.ac.kr [Department of Physics and Research Institute for Basic Sciences, Kyung Hee University, Seoul 130-701 (Korea, Republic of)

    2014-04-21T23:59:59.000Z

    Using ultraviolet photoelectron spectroscopy (UPS), we have measured the energy level offset at the planar interface between poly(3-hexylthiophene) (P3HT) and C{sub 61}-butyric acid methylester (PCBM). Gradual deposition of PCBM onto spin-coated P3HT in high vacuum was made possible by using electrospray vacuum deposition (EVD). The UPS measurement of EVD-prepared planar interface resulted in the energy level offset of 0.91?eV between P3HT HOMO and PCBM LUMO, which is considered as the upper limit of V{sub oc} of the organic photovoltaic cells.

  9. CLTC is a not-for-profit research, development and demonstration facility leading innovations in energy-efficient lighting and daylighting technologies.

    E-Print Network [OSTI]

    California at Davis, University of

    in energy-efficient lighting and daylighting technologies. Collaborating with partners in government common ways CLTC utilizes funding to advance the science of energy-efficient lighting and daylighting and field test emerging lighting and daylighting technologies. Demonstrations help vet the performance

  10. A New Look at Natural Humics on Uranium Stability and Mobility Humic substances naturally forming organic materials in soil and groundwater, have

    E-Print Network [OSTI]

    A New Look at Natural Humics on Uranium Stability and Mobility Humic substances ­ naturally forming are significant because humics could present a potential challenge to immobilizing and stabilizing reduced uranium uranium bioreduction and oxidation. Environ. Sci. Technol. (in press). #12;

  11. Better Buildings Residential Network Membership Form

    Energy Savers [EERE]

    Membership Form BETTER BUILDINGS RESIDENTIAL NETWORK Type of Organization (Check all that apply) ConsultantAdvisor Manufacturer ContractorTrade ally Nonprofit organization...

  12. Isoreticular metal-organic frameworks, process for forming the same, and systematic design of pore size and functionality therein, with application for gas storage

    DOE Patents [OSTI]

    Yaghi, Omar M.; Eddaoudi, Mohamed; Li, Hailian; Kim, Jaheon; Rosi, Nathaniel

    2007-03-27T23:59:59.000Z

    The ability to design and construct solid-state materials with pre-determined structures is a grand challenge in chemistry. An inventive strategy based on reticulating metal ions and organic carboxylate links into extended networks has been advanced to a point that has allowed the design of porous structures in which pore size and functionality can be varied systematically. MOF-5, a prototype of a new class of porous materials and one that is constructed from octahedral Zn--O--C clusters and benzene links, was used to demonstrate that its 3-D porous system can be functionalized with the organic groups, --Br, --NH2, --OC3H7, --OC5H11, --H4C2, and --H4C4, and its pore size expanded with the long molecular struts biphenyl, tetrahydropyrene, pyrene, and terphenyl. The ability to direct the formation of the octahedral clusters in the presence of a desired carboxylate link is an essential feature of this strategy, which resulted in the design of an isoreticular (having the same framework topology) series of sixteen well-defined materials whose crystals have open space representing up to 91.1% of the crystal volume, and homogeneous periodic pores that can be incrementally varied from 3.8 to 28.8 angstroms. Unlike the unpredictable nature of zeolite and other molecular sieve syntheses, the deliberate control exercised at the molecular level in the design of these crystals is expected to have tremendous implications on materials properties and future technologies. Indeed, data indicate that members of this series represent the first monocrystalline mesoporous organic/inorganic frameworks, and exhibit the highest capacity for methane storage (155 cm3/cm3 at 36 atm) and the lowest densities (0.41 to 0.21 g/cm3) attained to date for any crystalline material at room temperature.

  13. Water purification using organic salts

    DOE Patents [OSTI]

    Currier, Robert P.

    2004-11-23T23:59:59.000Z

    Water purification using organic salts. Feed water is mixed with at least one organic salt at a temperature sufficiently low to form organic salt hydrate crystals and brine. The crystals are separated from the brine, rinsed, and melted to form an aqueous solution of organic salt. Some of the water is removed from the aqueous organic salt solution. The purified water is collected, and the remaining more concentrated aqueous organic salt solution is reused.

  14. Sample Event Response Form STUDENT ORGANIZATION NAME

    E-Print Network [OSTI]

    Ben-Yakar, Adela

    15 - 16, 2011, Saturday and Sunday, Johnson and Herst Ranch, Marble Falls, Texas The Student Retreat

  15. Form:Financial Organization | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualPropertyd8c-a9ae-f8521cbb8489Information HydroFontana,dataset name below to addOil and

  16. Form:Networking Organization | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2,AUDIT REPORTEnergyFarms A S JumpWindfarm Holdings Ltd JumpForas

  17. Form:Policy Organization | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump to:ar-80m.pdfFillmoreGabbs ValleyCity,ForkedAdd a Marine andThis is the

  18. C . D A N I E L S T U B B S , J R . , C P A CPA with experience as chief fiscal officer in not-for-profit, private industry, public accounting and government/regulatory

    E-Print Network [OSTI]

    Lin, Xiaodong

    costing which helped the firm to manage significant new business initiatives thereby tripling the size function in Phoeniz, AZ. 1994­1997 New York State Board for Public Accountancy Albany, NY Executive conducted throughout New York State: licensing of individual CPAs; registration of public accounting firms

  19. Method of forming ceramic bricks

    DOE Patents [OSTI]

    Poeppel, R.B.; Claar, T.D.; Silkowski, P.

    1987-04-22T23:59:59.000Z

    A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

  20. Method of forming ceramic bricks

    DOE Patents [OSTI]

    Poeppel, Roger B. (Glen Ellyn, IL); Claar, Terry D. (Newark, DE); Silkowski, Peter (Urbana, IL)

    1988-01-01T23:59:59.000Z

    A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

  1. INTERNSHIP COMMITMENT FORM Master of Professional Science (MPS)

    E-Print Network [OSTI]

    Miami, University of

    1 INTERNSHIP COMMITMENT FORM Master of Professional Science (MPS) Student Name: _______________________________________________________ Internship Organization: __________________________________ Address: ________________________________________ Internship Supervisor: ______________________________________________ E-Mail: ______________________ Phone

  2. INTERNSHIP COMMITMENT FORM Master of Professional Science (MPS)

    E-Print Network [OSTI]

    Miami, University of

    1 INTERNSHIP COMMITMENT FORM Master of Professional Science (MPS) STUDENT:______________________________________________________ _____________________________________________________________ Organization Website: ___________________________________________ INTERNSHIP SUPERVISOR: __________________________________________ E-Mail: ______________________________________ Phone: __________________________ INTERNSHIP DETAILS

  3. Bioenergy Business Partner Information Gathering Form

    E-Print Network [OSTI]

    Bioenergy Business Partner Information Gathering Form Fax completed form to the Agribusiness.hnei.hawaii.edu/bmpp/stakeholders.asp Partners are organizations that perform, intend to perform, or should perform bioenergy processes and/or requirements. Please tell us about your organization and the role it plays in bioenergy production in Hawaii

  4. Differential forms

    E-Print Network [OSTI]

    Poniz, Philip

    1976-01-01T23:59:59.000Z

    ~ . . . , e )u A . . . A u REMARK 4. 16. Since there are pk) possibilities to chose among n ele- ments the set of k distinct elements the dimension of the space Ak(R ;R) equals (&) for nk k 26 CHAPTER V DIFFERENTIAL FORMS ? INTRODUCTION AND DEFINITION... v(x) (41, . . . , 4k 1) (m (x) (g )) (62, . . . , 4k I) (7. 1) Since (m (x))(4 ) c A (E;F) Theorem 4. 1. ). it follows that v(x) t Al k(Ei ) ~ ( We now introduce the mapping dm:U ~ A + (E;F) defined as follows: dw(x) = v(x) = Esgn(p)pv(x). Pt...

  5. JLF Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > The Energy Materials Center atdiffusivities inJLF Forms JLF Target Fab

  6. Request Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Scienceand Requirements Recently ApprovedReliability TechnologyRenewalReportReports andRequestForm

  7. Organic aerogel microspheres

    DOE Patents [OSTI]

    Mayer, Steven T. (San Leandro, CA); Kong, Fung-Ming (Pleasanton, CA); Pekala, Richard W. (Pleasant Hill, CA); Kaschmitter, James L. (Pleasanton, CA)

    1999-01-01T23:59:59.000Z

    Organic aerogel microspheres which can be used in capacitors, batteries, thermal insulation, adsorption/filtration media, and chromatographic packings, having diameters ranging from about 1 micron to about 3 mm. The microspheres can be pyrolyzed to form carbon aerogel microspheres. This method involves stirring the aqueous organic phase in mineral oil at elevated temperature until the dispersed organic phase polymerizes and forms nonsticky gel spheres. The size of the microspheres depends on the collision rate of the liquid droplets and the reaction rate of the monomers from which the aqueous solution is formed. The collision rate is governed by the volume ratio of the aqueous solution to the mineral oil and the shear rate, while the reaction rate is governed by the chemical formulation and the curing temperature.

  8. Organic aerogel microspheres

    DOE Patents [OSTI]

    Mayer, S.T.; Kong, F.M.; Pekala, R.W.; Kaschmitter, J.L.

    1999-06-01T23:59:59.000Z

    Organic aerogel microspheres are disclosed which can be used in capacitors, batteries, thermal insulation, adsorption/filtration media, and chromatographic packings, having diameters ranging from about 1 micron to about 3 mm. The microspheres can be pyrolyzed to form carbon aerogel microspheres. This method involves stirring the aqueous organic phase in mineral oil at elevated temperature until the dispersed organic phase polymerizes and forms nonstick gel spheres. The size of the microspheres depends on the collision rate of the liquid droplets and the reaction rate of the monomers from which the aqueous solution is formed. The collision rate is governed by the volume ratio of the aqueous solution to the mineral oil and the shear rate, while the reaction rate is governed by the chemical formulation and the curing temperature.

  9. FormLink/FeynCalcFormLink : Embedding FORM in Mathematica and FeynCalc

    E-Print Network [OSTI]

    Feng Feng; Rolf Mertig

    2012-12-17T23:59:59.000Z

    FORM, a symbolic manipulation system, has been widely used in a lot of calculations for High Energy Physics due to its high performance and fficient design. Mathematica, another computational software program, has also widely been used, but more for reasons of generality and user-friendliness than for speed. Especially calculations involving tensors and noncommutative operations like calculating Dirac traces can be rather slow in Mathematica, compared to FORM. In this article we describe FormLink and FeynCalcFormLink, two Mathematica packages to link Mathematica and FeynCalc with FORM. FormLink can be used without FeynCalc and FeynCalcFormLink, which is an extension loading FormLink and FeynCalc automatically. With these two packages the impressive speed and other special features of FORM get embedded into the generality of Mathematica and FeynCalc in a simple manner. FeynCalcFormLink provides a FORM-based turbo for FeynCalc, making it much more efficient. FormLink turns Mathematica into an editor and code organizer for FORM.

  10. Organic Separation Test Results

    SciTech Connect (OSTI)

    Russell, Renee L.; Rinehart, Donald E.; Peterson, Reid A.

    2014-09-22T23:59:59.000Z

    Separable organics have been defined as those organic compounds of very limited solubility in the bulk waste and that can form a separate liquid phase or layer (Smalley and Nguyen 2013), and result from three main solvent extraction processes: U Plant Uranium Recovery Process, B Plant Waste Fractionation Process, and Plutonium Uranium Extraction (PUREX) Process. The primary organic solvents associated with tank solids are TBP, D2EHPA, and NPH. There is concern that, while this organic material is bound to the sludge particles as it is stored in the tanks, waste feed delivery activities, specifically transfer pump and mixer pump operations, could cause the organics to form a separated layer in the tank farms feed tank. Therefore, Washington River Protection Solutions (WRPS) is experimentally evaluating the potential of organic solvents separating from the tank solids (sludge) during waste feed delivery activities, specifically the waste mixing and transfer processes. Given the Hanford Tank Waste Treatment and Immobilization Plant (WTP) waste acceptance criteria per the Waste Feed Acceptance Criteria document (24590-WTP-RPT-MGT-11-014) that there is to be no visible layer of separable organics in the waste feed, this would result in the batch being unacceptable to transfer to WTP. This study is of particular importance to WRPS because of these WTP requirements.

  11. Recovery of organic acids

    DOE Patents [OSTI]

    Verser, Dan W. (Menlo Park, CA); Eggeman, Timothy J. (Lakewood, CO)

    2011-11-01T23:59:59.000Z

    A method is disclosed for the recovery of an organic acid from a dilute salt solution in which the cation of the salt forms an insoluble carbonate salt. A tertiary amine and CO.sub.2 are introduced to the solution to form the insoluble carbonate salt and a complex between the acid and an amine. A water immiscible solvent, such as an alcohol, is added to extract the acid/amine complex from the dilute salt solution to a reaction phase. The reaction phase is continuously dried and a product between the acid and the solvent, such as an ester, is formed.

  12. Recovery of organic acids

    DOE Patents [OSTI]

    Verser, Dan W. (Golden, CO); Eggeman, Timothy J. (Lakewood, CO)

    2009-10-13T23:59:59.000Z

    A method is disclosed for the recovery of an organic acid from a dilute salt solution in which the cation of the salt forms an insoluble carbonate salt. A tertiary amine and CO.sub.2 are introduced to the solution to form the insoluble carbonate salt and a complex between the acid and an amine. A water immiscible solvent, such as an alcohol, is added to extract the acid/amine complex from the dilute salt solution to a reaction phase. The reaction phase is continuously dried and a product between the acid and the solvent, such as an ester, is formed.

  13. Process to form mesostructured films

    DOE Patents [OSTI]

    Brinker, C. Jeffrey (Albuquerque, NM); Anderson, Mark T. (Woodbury, MN); Ganguli, Rahul (Camarillo, CA); Lu, Yunfeng (Albuquerque, NM)

    1999-01-01T23:59:59.000Z

    This invention comprises a method to form a family of supported films film with pore size in the approximate range 0.8-20 nm exhibiting highly ordered microstructures and porosity derived from an ordered micellar or liquid-crystalline organic-inorganic precursor structure that forms during film deposition. Optically transparent, 100-500-nm thick films exhibiting a unique range of microstructures and uni-modal pore sizes are formed in seconds in a continuous coating operation. Applications of these films include sensors, membranes, low dielectric constant interlayers, anti-reflective coatings, and optical hosts.

  14. Dombroski, M.J. and K.M. Carley, October, 2002, "NETEST: Estimating a Terrorist Network's Structure," Computational & Mathematical Organization Theory, 8, pp. 235-241.

    E-Print Network [OSTI]

    Sadeh, Norman M.

    ," Computational & Mathematical Organization Theory, 8, pp. 235 & Mathematical Organization Theory, 8, pp. 235 and asymmetric form of warfare against elusive terrorist organizations. Defense and investigative organizations

  15. AMS INTERNSHIP PROGRAM Employer Posting Form

    E-Print Network [OSTI]

    Pulfrey, David L.

    AMS INTERNSHIP PROGRAM Employer Posting Form Organization Name WorksafeBC Location 6951 Westminster 604-279-8136 Fax Skills acquired during this internship include Microsoft Excel and/or Microsoft

  16. Improving data quality with dynamic forms

    E-Print Network [OSTI]

    Chen, Kuang

    Organizations in developing regions want to efficiently collect digital data, but standard data gathering practices from the developed world are often inappropriate. Traditional techniques for form design and data quality ...

  17. Leadership, Organizations

    E-Print Network [OSTI]

    Palmeri, Thomas

    Leadership, Policy & Organizations #12;2 At Peabody students have the opportunity to develop new College, in the Department of Leadership, Policy and Organizations (LPO). The faculty believes Patricia and Rodes Hart Chair, and Professor of Education Policy and Leadership, Ellen Goldring also serves

  18. Method of doping organic semiconductors

    DOE Patents [OSTI]

    Kloc, Christian Leo (Constance, DE); Ramirez, Arthur Penn (Summit, NJ); So, Woo-Young (New Providence, NJ)

    2012-02-28T23:59:59.000Z

    A method includes the steps of forming a contiguous semiconducting region and heating the region. The semiconducting region includes polyaromatic molecules. The heating raises the semiconducting region to a temperature above room temperature. The heating is performed in the presence of a dopant gas and the absence of light to form a doped organic semiconducting region.

  19. Organic Superconductors

    SciTech Connect (OSTI)

    Charles Mielke

    2009-02-27T23:59:59.000Z

    Intense magnetic fields are an essential tool for understanding layered superconductors. Fundamental electronic properties of organic superconductors are revealed in intense (60 tesla) magnetic fields. Properties such as the topology of the Fermi surface and the nature of the superconducting order parameter are revealed. With modest maximum critical temperatures~13K the charge transfer salt organic superconductors prove to be incredibly valuable materials as their electronically clean nature and layered (highly anisotropic) structures yield insights to the high temperature superconductors. Observation of de Haas-van Alphen and Shubnikov-de Haas quantum oscillatory phenomena, magnetic field induced superconductivity and re-entrant superconductivity are some of the physical phenomena observed in the charge transfer organic superconductors. In this talk, I will discuss the nature of organic superconductors and give an overview of the generation of intense magnetic fields; from the 60 tesla millisecond duration to the extreme 1000 tesla microsecond pulsed magnetic fields.

  20. INTERNSHIP COMMITMENT FORM Master of Professional Science (MPS)

    E-Print Network [OSTI]

    Miami, University of

    INTERNSHIP COMMITMENT FORM Master of Professional Science (MPS) Student Name: _______________________________________________________ E-Mail: ________________________________ Phone: _______________________ Internship Organization: ________________________________________ Internship Supervisor: ______________________________________________ E-Mail: ______________________ Phone

  1. INTERNSHIP AGREEMENT FORM Master's of Professional Science (MPS)

    E-Print Network [OSTI]

    Miami, University of

    INTERNSHIP AGREEMENT FORM Master's of Professional Science (MPS) Student Name-Mail: ________________________________ Phone: _______________________ Internship Organization: __________________________________ Address: ________________________________________ Internship Supervisor: ______________________________________________ E-Mail: ______________________ Phone

  2. Austin E. Quigley Black Box Theater Proposal Form

    E-Print Network [OSTI]

    Hone, James

    -1- Austin E. Quigley Black Box Theater Proposal Form Sponsoring Organization indicate that you have read the Austin E. Quigley Black Box Theatre Policy and Procedure Guidelines

  3. ID BUC$ EQUIPMENT REQUEST FORM CAMPUS EVENT PAYMENT OPTION

    E-Print Network [OSTI]

    Karsai, Istvan

    ID BUC$ EQUIPMENT REQUEST FORM CAMPUS EVENT PAYMENT OPTION FOR ETSU ORGANIZATIONS Name ID BUC$. ETSU account transfer or a check requested? o ETSU Account

  4. Market Organization and Efficiency in Electricity Markets

    E-Print Network [OSTI]

    Sadoulet, Elisabeth

    Market Organization and Efficiency in Electricity Markets Erin T. Mansur and Matthew W. White October 2007 Draft Abstract Electricity markets exhibit two different forms of organization costs. Our analysis points to the merits of organized market institutions for electricity, a central

  5. Plutonium immobilization form evaluation

    SciTech Connect (OSTI)

    Gray, L. W., LLNL

    1998-02-13T23:59:59.000Z

    The 1994 National Academy of Sciences study and the 1997 assessment by DOE`s Office of Nonproliferation and National Security have emphasized the importance of the overall objectives of the Plutonium Disposition Program of beginning disposition rapidly. President Clinton and other leaders of the G-7 plus one (`Political Eight`) group of states, at the Moscow Nuclear Safety And Security Summit in April 1996, agreed on the objectives of accomplishing disposition of excess fissile material as soon as practicable. To meet these objectives, DOE has laid out an aggressive schedule in which large-scale immobilization operations would begin in 2005. Lawrence Livermore National Laboratory (LLNL), the lead laboratory for the development of Pu immobilization technologies for the Department of Energy`s Office of Fissile Materials Disposition (MD), was requested by MD to recommend the preferred immobilization form and technology for the disposition of excess weapons-usable Pu. In a series of three separate evaluations, the technologies for the candidate glass and ceramic forms were compared against criteria and metrics that reflect programmatic and technical objectives: (1) Evaluation of the R&D and engineering data for the two forms against the decision criteria/metrics by a technical evaluation panel comprising experts from within the immobilization program. (2) Integrated assessment by LLNL immobilization management of the candidate technologies with respect to the weighted criteria and other programmatic objectives, leading to a recommendation to DOE/MD on the preferred technology based on technical factors. (3) Assessment of the decision process, evaluation, and recommendation by a peer review panel of independent experts. Criteria used to assess the relative merits of the immobilization technologies were a subset of the criteria previously used by MD to choose among disposition options leading to the Programmatic Environmental Impact Statement and Record of Decision for the Storage and Disposition of Weapons-Usable Fissile Materials, January 1997. Criteria were: (1) resistance to Pu theft, diversion, and recovery by a terrorist organization or rogue nation; (2) resistance to recovery and reuse by host nation; (3) technical viability, including technical maturity, development risk, and acceptability for repository disposal; (4) environmental, safety, and health factors; (5) cost effectiveness; and (6) timeliness. On the basis of the technical evaluation and assessments, in September, 1997, LLNL recommended to DOE/MD that ceramic technologies be developed for deployment in the planned Pu immobilization plant.

  6. An Approach For Evolving Novel Organizational Forms Kevin Crowston

    E-Print Network [OSTI]

    Crowston, Kevin

    of Information Studies Syracuse University Appeared in Journal of Computational Organization Theory This paper Organization Theory. Hillsdale, NJ: Lawrence Erlbaum, 1994, pp. 1938. The author gratefully acknowledges;An approach for evolving novel organizational forms Abstract A key problem in organization theory

  7. Energy densification of biomass-derived organic acids

    DOE Patents [OSTI]

    Wheeler, M. Clayton; van Walsum, G. Peter; Schwartz, Thomas J.; van Heiningen, Adriaan

    2013-01-29T23:59:59.000Z

    A process for upgrading an organic acid includes neutralizing the organic acid to form a salt and thermally decomposing the resulting salt to form an energy densified product. In certain embodiments, the organic acid is levulinic acid. The process may further include upgrading the energy densified product by conversion to alcohol and subsequent dehydration.

  8. APPENDIX A: Forms and Instructions Form Form R93D-44 Form R93D...

    U.S. Energy Information Administration (EIA) Indexed Site

    .... Mid-Year Coding Form ... Coding and Data Entry Control Card ... Mid-Year Keying Instructions ......

  9. Organizing Committee

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeeding access toTest andOptimize carbon AboutOrganizing Committee

  10. Annual Review Form (ARF) for Recognized Student Organizations (RSO's)

    E-Print Network [OSTI]

    Logan, David

    Education q Programming Advice/Assistance q Software Training q Design Work q Free Pepsi Product q Policy

  11. RRC - Organization Report Form P-5 | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I GeothermalPotentialBiopowerSolidGenerationMethodInformationeNevada <REC SolarRFMDSystem Login

  12. From association to organization

    E-Print Network [OSTI]

    Mandler, George

    2011-01-01T23:59:59.000Z

    S.M. (1978). Organization theory and memory for prose: Aand summarize organization theory and relevant empiricalexplained in terms of organization theory. The hierarchical

  13. Organization Chart - Home

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LSD Logo About Us People & Organization Research News & Events Safety Internal Resources Organization Chart Departments Scientific Staff Directory Committees Organization Chart...

  14. Time, energy & form

    E-Print Network [OSTI]

    McInnis, Martha Jane

    1982-01-01T23:59:59.000Z

    Physical manifestations of time occur in natural forms of all sizes. Architectural form serves as shelter while providing a built envelope of human life, simultaneously influencing and influenced by energetic activities ...

  15. applying organic chemicals: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Summary: .edu; cheriek@us.ibm.com Shrinking the device dimensions of polycrystalline thin film organic transistors films were formed by first spin-coating and then thermally...

  16. Constitution Organization: ASME Date: 5 September, 2014

    E-Print Network [OSTI]

    Firestone, Jeremy

    Constitution Organization: ASME Date: 5 September, 2014 Preamble We, the students at the University of Delaware, do hereby form the organization known as the American Society of Mechanical Engineers for the purpose of the advancement and dissemination of knowledge of the theory and practice of mechanical

  17. AMS INTERNSHIP PROGRAM Employer Posting Form

    E-Print Network [OSTI]

    Pulfrey, David L.

    AMS INTERNSHIP PROGRAM Employer Posting Form Organization Name Reframe Marketing Inc. Location on an Internship basis. Because we are a smaller company, you will get to learn lots since you are expected to fill · not guaranteed a job at the end of the internship · flexibility of working from home If you are interested

  18. AMS INTERNSHIP PROGRAM Employer Posting Form

    E-Print Network [OSTI]

    Pulfrey, David L.

    AMS INTERNSHIP PROGRAM Employer Posting Form Organization Name Star Solutions International internship. The Visual Communication/ Marketing Intern will use their skills and knowledge to create, produce. Completion of this project will be the main focus of the internship. SKILLS REQUIRED AND/OR RECOMMENDED Must

  19. AMS INTERNSHIP PROGRAM Employer Posting Form

    E-Print Network [OSTI]

    Pulfrey, David L.

    AMS INTERNSHIP PROGRAM Employer Posting Form Organization Name Star Solutions International for 2 - 3 high-energy, resourceful individuals for a 10-12 week internship. This is an entry-level internship in marketing and sales. This position will be working with senior marketing and sales executives

  20. Methods of forming steel

    DOE Patents [OSTI]

    Branagan, Daniel J. (Iona, ID); Burch, Joseph V. (Shelley, ID)

    2001-01-01T23:59:59.000Z

    In one aspect, the invention encompasses a method of forming a steel. A metallic glass is formed and at least a portion of the glass is converted to a crystalline steel material having a nanocrystalline scale grain size. In another aspect, the invention encompasses another method of forming a steel. A molten alloy is formed and cooled the alloy at a rate which forms a metallic glass. The metallic glass is devitrified to convert the glass to a crystalline steel material having a nanocrystalline scale grain size. In yet another aspect, the invention encompasses another method of forming a steel. A first metallic glass steel substrate is provided, and a molten alloy is formed over the first metallic glass steel substrate to heat and devitrify at least some of the underlying metallic glass of the substrate.

  1. Categorical Exclusion Determination Form

    Broader source: Energy.gov (indexed) [DOE]

    Form Proposed Action Title: (0471-1595) Regents of the University of Minnesota - Thermal Fuel: Solar Fuels via Partial Redox Cycles with Heat Recovery Program or Field...

  2. Partnership Agreement Form

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Partnership Agreement Form Learn more at energy.goveereamobetter-plants The Better Buildings, Better Plants Program is a national initiative to significantly improve energy...

  3. Shaping urban form without zoning: a case study of houston

    E-Print Network [OSTI]

    Qian, Zhu

    2009-05-15T23:59:59.000Z

    , civic and private organizations such as super neighborhoods and homeowner associations fill the gaps left by the lack of land use zoning. These two aspects contribute to land use planning and urban form of the city. Houston presents a contradiction...

  4. Method of forming nanodielectrics

    DOE Patents [OSTI]

    Tuncer, Enis [Knoxville, TN; Polyzos, Georgios [Oak Ridge, TN

    2014-01-07T23:59:59.000Z

    A method of making a nanoparticle filled dielectric material. The method includes mixing nanoparticle precursors with a polymer material and reacting the nanoparticle mixed with the polymer material to form nanoparticles dispersed within the polymer material to form a dielectric composite.

  5. Method for forming materials

    DOE Patents [OSTI]

    Tolle, Charles R. (Idaho Falls, ID); Clark, Denis E. (Idaho Falls, ID); Smartt, Herschel B. (Idaho Falls, ID); Miller, Karen S. (Idaho Falls, ID)

    2009-10-06T23:59:59.000Z

    A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

  6. Megahertz organic/polymer diodes

    DOE Patents [OSTI]

    Katz, Howard Edan; Sun, Jia; Pal, Nath Bhola

    2012-12-11T23:59:59.000Z

    Featured is an organic/polymer diode having a first layer composed essentially of one of an organic semiconductor material or a polymeric semiconductor material and a second layer formed on the first layer and being electrically coupled to the first layer such that current flows through the layers in one direction when a voltage is applied in one direction. The second layer is essentially composed of a material whose characteristics and properties are such that when formed on the first layer, the diode is capable of high frequency rectifications on the order of megahertz rectifications such as for example rectifications at one of above 100KHz, 500KhZ, IMHz, or 10 MHz. In further embodiments, the layers are arranged so as to be exposed to atmosphere.

  7. Functionalized sorbent for chemical separations and sequential forming process

    DOE Patents [OSTI]

    Fryxell, Glen E. (Kennewick, WA); Zemanian, Thomas S. (Richland, WA)

    2012-03-20T23:59:59.000Z

    A highly functionalized sorbent and sequential process for making are disclosed. The sorbent includes organic short-length amino silanes and organic oligomeric polyfunctional amino silanes that are dispersed within pores of a porous support that form a 3-dimensional structure containing highly functionalized active binding sites for sorption of analytes.

  8. Introduction to differential forms

    E-Print Network [OSTI]

    2015-03-08T23:59:59.000Z

    section 8) if it has a potential energy function. In terms of differential forms, F is conservative precisely when F1dx + F2dy is exact. 3 Parametric curves.

  9. Electromagetic proton form factors

    E-Print Network [OSTI]

    M Y Hussein

    2006-10-31T23:59:59.000Z

    The electromagnetic form factors are crucial to our understanding of the proton internal structure, and thus provide a strong constraint of the distributions of the charge and magnetization current within the proton. We adopted the quark-parton model for calculating and understanding the charge structure of the proton interms of the electromagnetic form factors. A remarkable agreement with the available experimental evidence is found.

  10. Effect of Hydrophobic Primary Organic Aerosols on Secondary Organic...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hydrophobic Primary Organic Aerosols on Secondary Organic Aerosol Formation from Ozonolysis of ?-Pinene. Effect of Hydrophobic Primary Organic Aerosols on Secondary Organic...

  11. Organic Photovoltaics Philip Schulz

    E-Print Network [OSTI]

    Firestone, Jeremy

    Field Effect Transistors Organic Light Emitting Diodes Organic Solar Cells .OFET, OTFT .RF-ID tag 1977 Conductivity in polymers 1986 First heterojunction OPV 1987 First organic light emitting diode (OLED) 1993 First OPV from solution processing 2001 First certified organic solar cell with 2

  12. Departmental Organization and Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1993-06-10T23:59:59.000Z

    Effective immediately, the Departmental organization structure reflected in the chart at Attachment 1 has been approved.

  13. Metal-doped organic gels and method thereof

    DOE Patents [OSTI]

    Satcher, Jr., Joe H. (Patterson, CA); Baumann, Theodore F. (Tracy, CA)

    2007-10-23T23:59:59.000Z

    Disclosed herein is a sol-gel polymerization process for synthesizing metal-doped organic gels. The process polymerizes metal salts of hydroxylated benzenes or hydroxylated benzene derivatives with alkyl or aryl aldehydes to form metal-doped, wet, organic gels. The gels can then be dried by supercritical solvent extraction to form metal-doped aerogels or by evaporation to form metal-doped xerogels. The aerogels and xerogels can then be pyrolyzed.

  14. Metal-doped organic gels and method thereof

    SciTech Connect (OSTI)

    Satcher Jr., Joe H.; Baumann, Theodore F.

    2003-09-02T23:59:59.000Z

    Disclosed herein is a sol-gel polymerization process for synthesizing metal-doped organic gels. The process polymerizes metal salts of hydroxylated benzenes or hydroxylated benzene derivatives with alkyl or aryl aldehydes to form metal-doped, wet, organic gels. The gels can then be dried by supercritical solvent extraction to form metal-doped aerogels or by evaporation to form metal-doped xerogels. The aerogels and xerogels can then be pyrolyzed.

  15. Forms | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you sure you want toworldPowerHome| Department ofForms Forms Engraving To

  16. Organe und Gremien Organe der Stiftung

    E-Print Network [OSTI]

    , Batavia IL (USA) Prof. Dr. F. Krausz BESSY GmbH, Berlin Prof. Dr. B. Naroska Universitt Hamburg Prof. Dr. F. Pauss European Organization for Particle Physics CERN, Geneva (CH) Dr. N. Roe Lawrence Berkeley Organization for Particle Physics CERN, Geneva (CH) Dr. A. Wrulich Paul Scherrer Institut, Villigen (CH) 14 #12

  17. Organe und Gremien Organe der Stiftung

    E-Print Network [OSTI]

    Medizinische Forschung, Heidelberg Prof. Dr. E. Jaeschke BESSY GmbH, Berlin Prof. Dr. W. Jentschke Institut fr Experimentalphysik, Universitt Hamburg (Ehrenmitglied) Dr. K.-H. Kissler European Organization for Particle Physics Organization for Particle Physics CERN, Geneva (CH) Prof. Dr. W. Sandner Max-Born-Institut, Berlin Dr. M

  18. Organe und Gremien Organe der Stiftung

    E-Print Network [OSTI]

    Kassel Prof. Dr. S. Gromann Fachbereich Physik, Universitt Marburg Prof. Dr. E. Jaeschke BESSY Gmb Organization for Particle Physics CERN, Genf (CH) Prof. Dr. V. Metag Gesellschaft fr Schwerionenforschung GSI, Darmstadt Dr. D. Mhl European Organization for Particle Physics CERN, Genf (CH) Prof. Dr. J. Stachel

  19. Organe und Gremien Organe der Stiftung

    E-Print Network [OSTI]

    BESSY GmbH, Berlin Prof. Dr. W. Jentschke II. Institut fr Experimentalphysik, Universitt Hamburg (Ehrenmitglied) Dr. K.-H. Kissler European Organization for Particle Physics CERN, Geneva (CH) Prof. Dr. K. Knigsmann Albert-Ludwigs-Universitt Freiburg Dr. J. May European Organization for Particle Physics CERN

  20. Oligomer functionalized nanotubes and composites formed therewith

    DOE Patents [OSTI]

    Zettl, Alexander K; Sainsbury, Toby; Frechet, Jean M.J.

    2014-03-18T23:59:59.000Z

    Disclosed herein is a sequential functionalization methodology for the covalent modification of nanotubes with between one and four repeat units of a polymer. Covalent attachment of oligomer units to the surface of nanotubes results in oligomer units forming an organic sheath around the nanotubes, polymer-functionalized-nanotubes (P-NTs). P-NTs possess chemical functionality identical to that of the functionalizing polymer, and thus provide nanoscale scaffolds which may be readily dispersed within a monomer solution and participate in the polymerization reaction to form a polymer-nanotube/polymer composite. Formation of polymer in the presence of P-NTs leads to a uniform dispersion of nanotubes within the polymer matrix, in contrast to aggregated masses of nanotubes in the case of pristine-NTs. The covalent attachment of oligomeric units to the surface of nanotubes represents the formation of a functional nanoscale building block which can be readily dispersed and integrated within the polymer to form a novel composite material.

  1. Development of Alternative Technetium Waste Forms

    SciTech Connect (OSTI)

    Czerwinski, Kenneth

    2013-09-13T23:59:59.000Z

    The UREX+1 process is under consideration for the separation of transuranic elements from spent nuclear fuel. The first steps of this process extract the fission product technicium-99 ({sup 99}Tc) into an organic phase containing tributylphosphate together with uranium. Treatment of this stream requires the separation of Tc from U and placement into a suitable waste storage form. A potential candidate waste form involves immobilizing the Tc as an alloy with either excess metallic zirconium or stainless steel. Although Tc-Zr alloys seem to be promising waste forms, alternative materials must be investigated. Innovative studies related to the synthesis and behavior of a different class of Tc materials will increase the scientific knowledge related to development of Tc waste forms. These studies will also provide a better understanding of the behavior of {sup 99}Tc in repository conditions. A literature survey has selected promising alternative waste forms for further study: technetium metallic alloys, nitrides, oxides, sulfides, and pertechnetate salts. The goals of this project are to 1) synthesize and structurally characterize relevant technetium materials that may be considered as waste forms, 2) investigate material behavior in solution under different conditions of temperature, electrochemical potential, and radiation, and 3) predict the long-term behavior of these materials.

  2. Procurement Forms | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeedingTechnical News, informationPriority FirmTechxx Organization

  3. International energy: Research organizations, 1986--1990

    SciTech Connect (OSTI)

    Hendricks, P.; Jordan, S. (eds.) (USDOE Office of Scientific and Technical Information, Oak Ridge, TN (USA))

    1991-03-01T23:59:59.000Z

    The International Energy: Research Organizations publication contains the standardized names of energy research organizations used in energy information databases. Involved in this cooperative task are (1) the technical staff of the USDOE Office of Scientific and Technical Information (OSTI) in cooperation with the member countries of the Energy Technology Data Exchange (ETDE) and (2) the International Nuclear Information System (INIS). This publication identifies current organizations doing research in all energy fields, standardizes the format for recording these organization names in bibliographic citations, assigns a numeric code to facilitate data entry, and identifies report number prefixes assigned by these organizations. These research organization names may be used in searching the databases Energy Science Technology'' on DIALOG and Energy'' on STN International. These organization names are also used in USDOE databases on the Integrated Technical Information System. Research organizations active in the past five years, as indicated by database records, were identified to form this publication. This directory includes approximately 34,000 organizations that reported energy-related literature from 1986 to 1990 and updates the DOE Energy Data Base: Corporate Author Entries.

  4. Thermal treatment of organic radioactive waste

    SciTech Connect (OSTI)

    Chrubasik, A.; Stich, W. [NUKEM GmbH, Alzenau (Germany)

    1993-12-31T23:59:59.000Z

    The organic radioactive waste which is generated in nuclear and isotope facilities (power plants, research centers and other) must be treated in order to achieve a waste form suitable for long term storage and disposal. Therefore the resulting waste treatment products should be stable under influence of temperature, time, radioactivity, chemical and biological activity. Another reason for the treatment of organic waste is the volume reduction with respect to the storage costs. For different kinds of waste, different treatment technologies have been developed and some are now used in industrial scale. The paper gives process descriptions for the treatment of solid organic radioactive waste of low beta/gamma activity and alpha-contaminated solid organic radioactive waste, and the pyrolysis of organic radioactive waste.

  5. Mixed crystal organic scintillators

    DOE Patents [OSTI]

    Zaitseva, Natalia P; Carman, M Leslie; Glenn, Andrew M; Hamel, Sebastien; Hatarik, Robert; Payne, Stephen A; Stoeffl, Wolfgang

    2014-09-16T23:59:59.000Z

    A mixed organic crystal according to one embodiment includes a single mixed crystal having two compounds with different bandgap energies, the organic crystal having a physical property of exhibiting a signal response signature for neutrons from a radioactive source, wherein the signal response signature does not include a significantly-delayed luminescence characteristic of neutrons interacting with the organic crystal relative to a luminescence characteristic of gamma rays interacting with the organic crystal. According to one embodiment, an organic crystal includes bibenzyl and stilbene or a stilbene derivative, the organic crystal having a physical property of exhibiting a signal response signature for neutrons from a radioactive source.

  6. FSC has 'failed the world's forests' say critics FSC has 'failed the world's forests' say critics

    E-Print Network [OSTI]

    a variety of environmental organizations. The FSC is an international not-for-profit organization for slipping standards The Forest Stewardship Council (FSC) has come under increasingly harsh criticisms from environmental organizations like World Rainforest Movement and Ecological Internet are putting the organization

  7. LED Price Tracking Form

    Broader source: Energy.gov [DOE]

    DOE intends to update the SSL Pricing and Efficacy Trend Analysis for Utility Program Planning report on an annual basis, but doing so requires that we have sufficient product and purchase data including acquisition date, purchase price, product category, and rated initial lumens. Those interested in helping collect this data are asked to use the LED Price Tracking FormMicrosoft Excel and follow the instructions for submitting data.

  8. ARM - VAP Suggestion Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadap DocumentationProductsmwravgProductsaodmfrsraod1michProductsaodsasheniraodSuggestion Form

  9. Organic photovoltaics and concentrators

    E-Print Network [OSTI]

    Mapel, Jonathan King

    2008-01-01T23:59:59.000Z

    The separation of light harvesting and charge generation offers several advantages in the design of organic photovoltaics and organic solar concentrators for the ultimate end goal of achieving a lower cost solar electric ...

  10. Organizing and Personalizing Intelligence

    E-Print Network [OSTI]

    Tan, Ah-Hwee

    Vista). More sophis- ticated ones, such as Northern Light, BullsEye and Copernic go a step further organize

  11. Organic photosensitive devices

    DOE Patents [OSTI]

    Rand, Barry P; Forrest, Stephen R

    2013-11-26T23:59:59.000Z

    The present invention generally relates to organic photosensitive optoelectronic devices. More specifically, it is directed to organic photosensitive optoelectronic devices having a photoactive organic region containing encapsulated nanoparticles that exhibit plasmon resonances. An enhancement of the incident optical field is achieved via surface plasmon polariton resonances. This enhancement increases the absorption of incident light, leading to a more efficient device.

  12. CCPPolicyBriefing Organization

    E-Print Network [OSTI]

    Feigon, Brooke

    . METHODOLOGY · The author incorporates the economic theory of organizations into the framework of public law to establish the theory of cartel organization, and calls for further studies to disclose the sophisticatedCCPPolicyBriefing September 2008 Cartel Organization and Antitrust Enforcement W: www

  13. Forms | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2: FinalOffers3.pdf0-45.pdf Flash2010-45.pdfFlash2011-43andPropertyForPlans Fact SheetForms

  14. Coach Compliance Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced. C o w l i t zManufacturing:DOECoach Compliance Form My team is

  15. FORM EIA-28

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells, Wisconsin:DeploymentSite Name: Email: Terminal2,7,7,of2014FORM EIA-28 -

  16. Form EIA-920 - 2005

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells, Wisconsin:DeploymentSite Name: Email:Uranium MarketingAdministration Form

  17. Research Input Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Scienceand Requirements Recently ApprovedReliabilityPrincipalResearchMakingHighlightsSubmit Form

  18. Forms | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental Assessments (EA)Budget(DANCE) TargetForms & Documents

  19. Radiation Safety Work Control Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Radiation Safety Work Control Form (see instructions on pg-3) Rev. May 2014 Area: Form : Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers...

  20. How atmospheric ice forms | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    atmospheric ice forms How atmospheric ice forms Released: September 08, 2014 New insights into atmospheric ice formation could improve climate models This study advances our...

  1. Bipolar pulse forming line

    DOE Patents [OSTI]

    Rhodes, Mark A. (Pleasanton, CA)

    2008-10-21T23:59:59.000Z

    A bipolar pulse forming transmission line module for linear induction accelerators having first, second, third, fourth, and fifth planar conductors which form an interleaved stack with dielectric layers between the conductors. Each conductor has a first end, and a second end adjacent an acceleration axis. The first and second planar conductors are connected to each other at the second ends, the fourth and fifth planar conductors are connected to each other at the second ends, and the first and fifth planar conductors are connected to each other at the first ends via a shorting plate adjacent the first ends. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short a high voltage from the first end of the third planar conductor to the first end of the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  2. Organic electrophosphorescence device having interfacial layers

    SciTech Connect (OSTI)

    Choulis, Stelios A. (San Jose, CA); Mathai, Mathew (Santa Clara, CA); Choong, Vi-En (San Jose, CA); So, Franky (Gainesville, FL)

    2010-08-10T23:59:59.000Z

    Techniques are described for forming an organic light emitting diode device with improved device efficiency. Materials having at least one energy level that is similar to those of a phosphorescent light emitting material in the diode are incorporated into the device to directly inject holes or electrons to the light emitting material.

  3. Evaluation of Radiation Resistance for Organic Materials

    E-Print Network [OSTI]

    McDonald, Kirk

    for organic materials used in atomic energy- related facilities J-PARC ITER Si-polymer Forming : fiber : "Radiation Resistivity of Polymeric Materials with Data Tables" (in Japanese) JAERI-Data/Code 2003 of Polymeric Materials with Data Tables" (in Japanese) JAERI-Data/Code 2003-015 C C H H H H n Polyethylene (PE

  4. Process for forming shaped group III-V semiconductor nanocrystals, and product formed using process

    DOE Patents [OSTI]

    Alivisatos, A. Paul (Oakland, CA); Peng, Xiaogang (Fayetteville, AR); Manna, Liberato (Palo del Colle, IT)

    2001-01-01T23:59:59.000Z

    A process for the formation of shaped Group III-V semiconductor nanocrystals comprises contacting the semiconductor nanocrystal precursors with a liquid media comprising a binary mixture of phosphorus-containing organic surfactants capable of promoting the growth of either spherical semiconductor nanocrystals or rod-like semiconductor nanocrystals, whereby the shape of the semiconductor nanocrystals formed in said binary mixture of surfactants is controlled by adjusting the ratio of the surfactants in the binary mixture.

  5. Process for forming shaped group II-VI semiconductor nanocrystals, and product formed using process

    DOE Patents [OSTI]

    Alivisatos, A. Paul (Oakland, CA); Peng, Xiaogang (Fayetteville, AR); Manna, Liberato (Palo del Colle, IT)

    2001-01-01T23:59:59.000Z

    A process for the formation of shaped Group II-VI semiconductor nanocrystals comprises contacting the semiconductor nanocrystal precursors with a liquid media comprising a binary mixture of phosphorus-containing organic surfactants capable of promoting the growth of either spherical semiconductor nanocrystals or rod-like semiconductor nanocrystals, whereby the shape of the semiconductor nanocrystals formed in said binary mixture of surfactants is controlled by adjusting the ratio of the surfactants in the binary mixture.

  6. Vitrification of organics-containing wastes

    DOE Patents [OSTI]

    Bickford, D.F.

    1995-01-01T23:59:59.000Z

    A process for stabilizing organics-containing waste materials and recovery metals therefrom, and a waste glass product made according to the process are described. Vitrification of wastes such as organic ion exchange resins, electronic components and the like can be accomplished by mixing at least one transition metal oxide with the wastes, and, if needed, glass formers to compensate for a shortage of silicates or other glass formers in the wastes. The transition metal oxide increases the rate of oxidation of organic materials in the wastes to improve the composition of the glass-forming mixture: at low temperatures, the oxide catalyzes oxidation of a portion of the organics in the waste; at higher temperatures, the oxide dissolves and the resulting oxygen ions oxidize more of the organics; and at vitrification temperatures, the metal ions conduct oxygen into the melt to oxidize the remaining organics. In addition, the transition metal oxide buffers the redox potential of the glass melt so that metals such as Au, Pt, Ag, and Cu separate form the melt in the metallic state and can be recovered. After the metals are recovered, the remainder of the melt is allowed to cool and may subsequently be disposed of. The product has good leaching resistance and can be disposed of in an ordinary landfill, or, alternatively, used as a filler in materials such as concrete, asphalt, brick and tile.

  7. STEP Utility Data Release Form

    Broader source: Energy.gov [DOE]

    STEP Utility Data Release Form, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  8. Nucleon Electromagnetic Form Factors

    SciTech Connect (OSTI)

    Marc Vanderhaeghen; Charles Perdrisat; Vina Punjabi

    2007-10-01T23:59:59.000Z

    There has been much activity in the measurement of the elastic electromagnetic proton and neutron form factors in the last decade, and the quality of the data has greatly improved by performing double polarization experiments, in comparison with previous unpolarized data. Here we review the experimental data base in view of the new results for the proton, and neutron, obtained at JLab, MAMI, and MIT-Bates. The rapid evolution of phenomenological models triggered by these high-precision experiments will be discussed, including the recent progress in the determination of the valence quark generalized parton distributions of the nucleon, as well as the steady rate of improvements made in the lattice QCD calculations.

  9. From Population to Organization Thinking

    E-Print Network [OSTI]

    Lane, David; Maxfield, Robert; Read, Dwight W; van der Leeuw, Sander E

    2009-01-01T23:59:59.000Z

    Herbert Simon developed a theory of organization for complexin need of a theory of organization. As we have alreadya deeper theory of organization: complex networks,

  10. Glassy dynamics distinguishes chromosome organization across organisms

    E-Print Network [OSTI]

    Hongsuk Kang; Young-Gui Yoon; D. Thirumalai; Changbong Hyeon

    2015-06-03T23:59:59.000Z

    Recent experiments showing scaling of the intrachromosomal contact probability, $P(s)\\sim s^{-1}$ with the genomic distance $s$, are interpreted to mean a self-similar fractal-like chromosome organization. However, scaling of $P(s)$ varies across organisms, requiring an explanation. We illustrate that dynamical arrest in a highly confined space as a discriminating marker for genome organization, by modeling chromosome inside a nucleus as a self-avoiding homopolymer confined to a sphere of varying sizes. Brownian dynamics simulations show that the chain dynamics slows down as the polymer volume fraction ($\\phi$) inside the confinement approaches a critical value $\\phi_c$. Using finite size scaling analysis, we determine $\\phi_c^{\\infty}\\approx 0.44$ for a sufficiently long polymer ($N\\gg 1$). Our study shows that the onset of glassy dynamics is the reason for the formation of segregated organization in human chromosomes ($N\\approx 3\\times 10^9$, $\\phi\\gtrsim\\phi_c^{\\infty}$), whereas chromosomes of budding yeast ($N\\approx 1.2\\times 10^7$, $\\phi<\\phi_c^{\\infty}$) are equilibrated with no clear signature of such organization.

  11. A review of Secondary Organic Aerosol (SOA) formation from isoprene

    E-Print Network [OSTI]

    Kroll, Jesse

    Recent field and laboratory evidence indicates that the oxidation of isoprene, (2-methyl-1,3-butadiene, C[subscript 5]H[subscript 8]) forms secondary organic aerosol (SOA). Global biogenic emissions of isoprene (600 Tg ...

  12. Lithium-based inorganic-organic framework materials

    E-Print Network [OSTI]

    Yeung, Hamish Hei-Man

    2013-01-01T23:59:59.000Z

    This dissertation describes research into lithium-based inorganic-organic frameworks, which has led to an increased understanding of the structural diversity and properties of these materials. The crystal structures of 11 new forms of lithium...

  13. Concave-hemisphere-patterned organic top-light emitting device

    DOE Patents [OSTI]

    Forrest, Stephen R; Slootsky, Michael; Lunt, Richard

    2014-01-21T23:59:59.000Z

    A first device is provided. The first device includes an organic light emitting device, which further comprises a first electrode, a second electrode, and an organic emissive layer disposed between the first and second electrode. Preferably, the second electrode is more transparent than the first electrode. The organic emissive layer has a first portion shaped to form an indentation in the direction of the first electrode, and a second portion shaped to form a protrusion in the direction of the second electrode. The first device may include a plurality of organic light emitting devices. The indentation may have a shape that is formed from a partial sphere, a partial cylinder, a pyramid, or a pyramid with a mesa, among others. The protrusions may be formed between adjoining indentations or between an indentation and a surface parallel to the substrate.

  14. Sociology: Computational Organization Theory Sociology: Computational Organization Theory

    E-Print Network [OSTI]

    Sadeh, Norman M.

    Sociology: Computational Organization Theory Sociology: Computational Organization Theory Kathleen; organization theory; organizational learning; social networks; expert systems Citation: Kathleen Carley, 1994, "Sociology: Computational Organization Theory." Social Science Computer Review, 12(4): 611-624. #12;Sociology

  15. Theory of Organic Magnetoresistance in Disordered Organic Semiconductors

    E-Print Network [OSTI]

    Flatte, Michael E.

    Theory of Organic Magnetoresistance in Disordered Organic Semiconductors Nicholas J. Harmon semiconductors, disordered semiconductors, organic magnetoresistance, percolation theory, spin transport organic semiconductors. The theory proposed here maps the complex phenomena of spin-dependent hopping onto

  16. Feasibility of Organizations -A Refinement of Chemical Organization Theory

    E-Print Network [OSTI]

    Hinze, Thomas

    Feasibility of Organizations - A Refinement of Chemical Organization Theory with Application to P a theorem providing a criteria for an unfeasible organization. This is a refinement of organization theory organization. Key words: reaction networks, constructive dynamical systems, chem- ical organization theory

  17. Food Exemption Request Organization Information

    E-Print Network [OSTI]

    Food Exemption Request Organization Information Organization Received ______ Organizations are permitted one food exemption per semester. Requests must be submitted): ___________________________________________________________________________________________________________________________________________ ___________________________________________________________________________________________________________________________________________ Only homemade food may be provided by your organization. Initial ______ No prepared food may

  18. Metal oxide/organic interface investigations for photovoltaic devices

    E-Print Network [OSTI]

    Pachoumi, Olympia

    2014-10-07T23:59:59.000Z

    organic photovoltaics is investigated. We show that using these ternary oxides can lead to superior devices by: prevent- ing a dipole forming between the oxide and the active organic layer in a model ZnMO / P3HT:PCBM OPV as well as lead to improved surface...

  19. Form Date 4/4/01 Refrigerant Service Order Form

    E-Print Network [OSTI]

    Russell, Lynn

    Form Date 4/4/01 Refrigerant Service Order Form Service ID: Owner: Work Order #: Building: Date: Issued: Completed: Equipment ID: Technicians: Location: Model: Manufact: Serial #: Refrigerant Type Minor Maintenance Recovery Vacuum: __________Inches Dispose of Unit Refrigerant Conversion Major

  20. Astatinated organic compounds

    DOE Patents [OSTI]

    Milius, R.A.; Lambrecht, R.M.; Bloomer, W.D.

    1989-05-02T23:59:59.000Z

    Methods and kits for incorporating a radioactive astatine isotope (particularly [sup 211]At) into an organic compound by electrophilic astatodestannylation of organostannanes. 3 figs.

  1. Organic vapor jet printing system

    DOE Patents [OSTI]

    Forrest, Stephen R

    2012-10-23T23:59:59.000Z

    An organic vapor jet printing system includes a pump for increasing the pressure of an organic flux.

  2. Glassy dynamics distinguishes chromosome organization across organisms

    E-Print Network [OSTI]

    Kang, Hongsuk; Thirumalai, D; Hyeon, Changbong

    2015-01-01T23:59:59.000Z

    Recent experiments showing scaling of the intrachromosomal contact probability, $P(s)\\sim s^{-1}$ with the genomic distance $s$, are interpreted to mean a self-similar fractal-like chromosome organization. However, scaling of $P(s)$ varies across organisms, requiring an explanation. We illustrate that dynamical arrest in a highly confined space as a discriminating marker for genome organization, by modeling chromosome inside a nucleus as a self-avoiding homopolymer confined to a sphere of varying sizes. Brownian dynamics simulations show that the chain dynamics slows down as the polymer volume fraction ($\\phi$) inside the confinement approaches a critical value $\\phi_c$. Using finite size scaling analysis, we determine $\\phi_c^{\\infty}\\approx 0.44$ for a sufficiently long polymer ($N\\gg 1$). Our study shows that the onset of glassy dynamics is the reason for the formation of segregated organization in human chromosomes ($N\\approx 3\\times 10^9$, $\\phi\\gtrsim\\phi_c^{\\infty}$), whereas chromosomes of budding yea...

  3. SSRL Computer Account Request Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SSRLLCLS Computer Account Request Form August 2009 Fill in this form and sign the security statement mentioned at the bottom of this page to obtain an account. Your Name:...

  4. 2011 Regional Competitions Student Forms

    E-Print Network [OSTI]

    Miami, University of

    records. If your team advances to the NOSB Finals, these forms will be required and you may resend.nosb.org Student Medical Information and Emergency Notification Form Name:_________________________________________ Phone Number:______________________ Medical Conditions or Previous Surgery

  5. Project Approval Form Concentration in

    E-Print Network [OSTI]

    Goldberg, Bennett

    Project Approval Form Concentration in Nanotechnology Return completed form to ENG Undergraduate of Graduation:____________________________ Instructions: Please check one of the following ways in which you Plan to complete the project as a requirement for the concentration in Nanotechnology. Depending upon

  6. Effective Presentations Organization

    E-Print Network [OSTI]

    Shull, David H.

    1 Pericles Effective Presentations · Content · Organization · Delivery · Visual aids and graphics Be brave Graphics · KISS · Powerpoint: ­ Font · Bigger than you'd expect · San serif ­ Lines · Thicker than · Organization · Energy · Clarity · Poise Key: Practice Web Resources · http

  7. Assessor Training NVLAP Assessment Forms

    E-Print Network [OSTI]

    NVLAP Assessor Training NVLAP Assessment Forms #12;Assessor Training 2009: NVLAP Assessment Forms 2 Summary Test Method Review Summary ProgramSpecific Checklists Examples #12;Assessor Training 2009: NVLAP are completed Assessor Names, Dates, Lab Code #12;Assessor Training 2009: NVLAP Assessment Forms 4 NIST

  8. NORTHWESTERN UNIVERSITY ACCIDENT REPORT FORM

    E-Print Network [OSTI]

    Shahriar, Selim

    NORTHWESTERN UNIVERSITY ACCIDENT REPORT FORM Whenever a University vehicle sustains damage of any kind, or is involved in an accident which results in personal injury or property damage, this accident that this form is for University Use Only and is not meant to supersede the official state accident report form

  9. INTERNATIONAL STUDENT FINANCIAL DOCUMENTATION FORM

    E-Print Network [OSTI]

    Barrash, Warren

    INTERNATIONAL STUDENT FINANCIAL DOCUMENTATION FORM This form is not an application for financial assistance. This form is REQUIRED before we can provide immigration documents, even if your government, photocopied or faxed supporting financial documents. **List your name as it appears on your passport** Family

  10. INTERNATIONAL STUDENT FINANCIAL DOCUMENTATION FORM

    E-Print Network [OSTI]

    Barrash, Warren

    INTERNATIONAL STUDENT FINANCIAL DOCUMENTATION FORM Please complete this form if you this form and supporting financial documents after you have received your admissions decision. To receive will come from that source. Please attach supporting financial support documents that are less than six

  11. INTERNATIONAL STUDENT FINANCIAL DOCUMENTATION FORM

    E-Print Network [OSTI]

    Barrash, Warren

    INTERNATIONAL STUDENT FINANCIAL DOCUMENTATION FORM Please complete this form if you this form and supporting financial documents after you have received your admissions decision. To receive will come from that source. Please attach original supporting financial support documents, issued in English

  12. Cloud Condensation Nuclei (CCN) Analysis of Biogenic Secondary Organic Aerosol

    E-Print Network [OSTI]

    Collins, Gary S.

    Cloud Condensation Nuclei (CCN) Analysis of Biogenic Secondary Organic Aerosol Rachel L. Atlas1' gas-phase emissions and the aerosols they form (figure 6), including a cloud condensation nuclei Cloud condensation nuclei (CCN) are particles which water vapor condenses onto to form cloud droplets

  13. Smith River Rancheria's Development of an Energy Organization Investigation

    SciTech Connect (OSTI)

    W.G Buehler & Associates

    2007-08-27T23:59:59.000Z

    Smith River Rancheria (SRR), for some time, has had a strong commitment to attaining energy selfsufficiency, to reduce overall energy costs and concurrently initiate economic development within the community. Early on it was recognized that the development of an energy organization was important and for this reason was made part of the SRR's strategic review not only for economic development but also the reduction of energy costs. Towards this end, SRR retained Werner G. Buehler of W.G. Buehler & Associates to investigate the many phases or steps required to establish such an energy organization and determine, if in fact, it could benefit the Tribe. The basic phases are delineated as: (1) Identify potential sources of wholesale power and transmission paths; (2) Evaluating the various forms of energy organizations; (3) Determining the benefits (and disadvantages) of each form of organization; (4) Gathering costs to organize and operate the selected form or energy organization; (5) Performing an economic analysis of forming and operating an energy organization; and (6) Develop an implementation plan.

  14. Departmental Organization Management System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-08-27T23:59:59.000Z

    Public Law 95-91, 42 United States Code 7101, Department of Energy Organization Act, Section 642 gives to the Secretary of the Department of Energy the responsibility to approve organization changes affecting the number, designation, or mission of Departmental Elements and to approve the addition, deletion, or transfer of missions and/or functions of or between Departmental Elements. In order to streamline the organizational change process, the Secretary has delegate to the Heads of Departmental Headquarters and Field Elements the authority to approve organization changes. No cancellations.

  15. Vitrification of organics-containing wastes

    DOE Patents [OSTI]

    Bickford, D.F.

    1997-09-02T23:59:59.000Z

    A process is described for stabilizing organics-containing waste materials and recovering metals therefrom, and a waste glass product made according to the process is also disclosed. Vitrification of wastes such as organic ion exchange resins, electronic components and the like can be accomplished by mixing at least one transition metal oxide with the wastes, and, if needed, glass formers to compensate for a shortage of silicates or other glass formers in the wastes. The transition metal oxide increases the rate of oxidation of organic materials in the wastes to improve the composition of the glass-forming mixture: at low temperatures, the oxide catalyzes oxidation of a portion of the organics in the waste; at higher temperatures, the oxide dissolves and the resulting oxygen ions oxidize more of the organics; and at vitrification temperatures, the metal ions conduct oxygen into the melt to oxidize the remaining organics. In addition, the transition metal oxide buffers the redox potential of the glass melt so that metals such as Au, Pt, Ag, and Cu separate from the melt in the metallic state and can be recovered. After the metals are recovered, the remainder of the melt is allowed to cool and may subsequently be disposed of. The product has good leaching resistance and can be disposed of in an ordinary landfill, or, alternatively, used as a filler in materials such as concrete, asphalt, brick and tile. 1 fig.

  16. Vitrification of organics-containing wastes

    DOE Patents [OSTI]

    Bickford, Dennis F. (Aiken, SC)

    1997-01-01T23:59:59.000Z

    A process for stabilizing organics-containing waste materials and recovering metals therefrom, and a waste glass product made according to the process. Vitrification of wastes such as organic ion exchange resins, electronic components and the like can be accomplished by mixing at least one transition metal oxide with the wastes, and, if needed, glass formers to compensate for a shortage of silicates or other glass formers in the wastes. The transition metal oxide increases the rate of oxidation of organic materials in the wastes to improve the composition of the glass-forming mixture: at low temperatures, the oxide catalyzes oxidation of a portion of the organics in the waste; at higher temperatures, the oxide dissolves and the resulting oxygen ions oxidize more of the organics; and at vitrification temperatures, the metal ions conduct oxygen into the melt to oxidize the remaining organics. In addition, the transition metal oxide buffers the redox potential of the glass melt so that metals such as Au, Pt, Ag, and Cu separate from the melt in the metallic state and can be recovered. After the metals are recovered, the remainder of the melt is allowed to cool and may subsequently be disposed of. The product has good leaching resistance and can be disposed of in an ordinary landfill, or, alternatively, used as a filler in materials such as concrete, asphalt, brick and tile.

  17. Thio-,amine-,nitro-,and macrocyclic containing organic aerogels & xerogels

    SciTech Connect (OSTI)

    Fox, Glenn A.; Tillotson, Thomas M.

    2005-08-02T23:59:59.000Z

    An organic aerogel or xerogel formed by a sol-gel reaction using starting materials that exhibit similar reactivity to the most commonly used resorcinol starting material. The new starting materials, including thio-, amine- and nitro-containing molecules and functionalized macrocyclic molecules will produce organic xerogels and aerogels that have improved performance in the areas of detection and sensor technology, as well as water stream remediation. Also, further functionalization of these new organic aerogels or xerogels will yield material that can be extracted with greater facility than current organic aerogels.

  18. Worldwide organic soil carbon and nitrogen data

    SciTech Connect (OSTI)

    Zinke, P.J.; Stangenberger, A.G. [Univ. of California, Berkeley, CA (United States). Dept. of Forestry and Resource Management; Post, W.M.; Emanual, W.R.; Olson, J.S. [Oak Ridge National Lab., TN (United States)

    1986-09-01T23:59:59.000Z

    The objective of the research presented in this package was to identify data that could be used to estimate the size of the soil organic carbon pool under relatively undisturbed soil conditions. A subset of the data can be used to estimate amounts of soil carbon storage at equilibrium with natural soil-forming factors. The magnitude of soil properties so defined is a resulting nonequilibrium values for carbon storage. Variation in these values is due to differences in local and geographic soil-forming factors. Therefore, information is included on location, soil nitrogen content, climate, and vegetation along with carbon density and variation.

  19. Organic materials with nonlinear optical properties

    DOE Patents [OSTI]

    Stupp, S.I.; Son, S.; Lin, H.C.

    1995-05-02T23:59:59.000Z

    The present invention is directed to organic materials that have the ability to double or triple the frequency of light that is directed through the materials. Particularly, the present invention is directed to the compound 4-[4-(2R)-2-cyano-7-(4{prime}-pentyloxy-4-biphenylcarbonyloxy)phenylheptylidenephenylcarbonyloxy]benzaldehyde, which can double the frequency of light that is directed through the compound. The invention is also directed to the compound (12-hydroxy-5,7-dodecadiynyl)-4{prime}-[(4{prime}-pentyloxy-4-biphenyl)carbonyloxy]-4-biphenylcarboxylate, and its polymeric form. The polymeric form can triple the frequency of light directed through it. 4 figs.

  20. Organic contaminant separator

    DOE Patents [OSTI]

    Del Mar, P.

    1993-12-28T23:59:59.000Z

    A process is presented of sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium by (a) passing an initial aqueous medium including a minor amount of the organic contaminant through a composite tube comprised of a blend of a polyolefin and a polyester, the composite tube having an internal diameter of from about 0.1 to about 2.0 millimeters and being of sufficient length to permit the organic contaminant to adhere to the composite tube, (b) passing a solvent through the composite tube. The solvent is capable of separating the adhered organic contaminant from the composite tube. Further, an extraction apparatus is presented for sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium. The apparatus includes a composite tube comprised of a blend of a polyolefin and a polyester. The composite tube has an internal diameter of from about 0.1 to about 2.0 millimeters and has sufficient length to permit an organic contaminant contained within an aqueous medium passed therethrough to adhere to the composite tube. 2 figures.

  1. Seal for fluid forming tools

    DOE Patents [OSTI]

    Golovashchenko, Sergey Fedorovich (Beverly Hills, MI); Bonnen, John Joseph Francis (Milford, MI)

    2012-03-20T23:59:59.000Z

    An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

  2. Aerogels derived from multifunctional organic monomers

    SciTech Connect (OSTI)

    Pekala, R.W.; Alviso, C.T.; Kong, F.M.; Hulsey, S.S.

    1991-09-01T23:59:59.000Z

    Traditional inorganic aerogels are mad via the hydrolysis and condensation of metal alkoxides. Recently, we reported the synthesis of organic aerogels based upon the aqueous polycondensation of (1) resorcinol with formaldehyde and (2) melamine with formaldehyde. The former materials can also be pyrolyzed in an inert atmosphere to form vitreous carbon aerogels. In both the inorganic and organic systems, the structure and properties of the dried aerogel are dictated by polymerization conditions. Factors such as pH, reactant ratio, and temperature influence the crosslinking chemistry and growth processes taking place prior to gelation. The ability to tailor the structure and properties of aerogels at the nanometer scale opens up exciting possibilities for these novel materials. This paper addresses the chemistry-structure-property relationships of organic aerogels. 22 refs., 7 figs.

  3. Chevron, GE form Technology Alliance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    form Technology Alliance February 3, 2014 HOUSTON, TX, Feb. 3, 2014-Chevron Energy Technology Company and GE Oil & Gas announced today the creation of the Chevron GE Technology...

  4. Identification of Location and Nature of Organic Matter and Contaminants on Sediments

    E-Print Network [OSTI]

    importance of these different forms of organic carbon in the sequestration of PAHs in sediments. Our to identify organic carbon location in sediment particles. Scanning electron microscopy with wavelength silica particles. It has been suggested previously that PAHs partition into organic carbon on soils

  5. Out of bounds? : rhetoric of urban form and its influence on state legislation in Massachusetts

    E-Print Network [OSTI]

    Solomon-Schwartz, Benjamin Peretz

    2008-01-01T23:59:59.000Z

    Urban form is the product of the actions of a multitude of actors, from governments to individuals, from corporations to activist organizations. It is the result of rules, ideas, assumptions,and arguments, all of which ...

  6. Mechanistic studies on metal-catalyzed carbon-nitrogen bond forming reactions

    E-Print Network [OSTI]

    Strieter, Eric R

    2005-01-01T23:59:59.000Z

    Mechanistic studies on copper and palladium-catalyzed C-N bond forming reactions are described. To understand the mechanistic details of these processes, several principles of physical organic chemistry have been employed. ...

  7. Mass yields of secondary organic aerosols from the oxidation of alpha-pinene and real plant emissions

    E-Print Network [OSTI]

    Kroll, Jesse

    Biogenic volatile organic compounds (VOCs) are a significant source of global secondary organic aerosol (SOA); however, quantifying their aerosol forming potential remains a challenge. This study presents smog chamber ...

  8. REFERRAL FORM PHONOLOGICAL AWARENESS CLINIC

    E-Print Network [OSTI]

    Hickman, Mark

    REFERRAL FORM PHONOLOGICAL AWARENESS CLINIC Concerns regarding communication Please return this form to: Clinical Administrator Email: clinic@cmds.canterbury.ac.nz Department of Communication Disorders Phone: 03-364-2408 Speech and Hearing Clinic Fax: 03-364-2760 University of Canterbury Private Bag

  9. STUDENT DISCIPLINARY ACTION FORM INSTRUCTIONS

    E-Print Network [OSTI]

    Baltisberger, Jay H.

    STUDENT DISCIPLINARY ACTION FORM INSTRUCTIONS Labor Program Office Berea College While one across campus. The "Student Disciplinary Action Form" was designed to provide labor supervisors directly with the student and discuss the matter in private. Calmly discuss the offense and the corrective

  10. forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengtheningWildfires mayYuan T. Lee'sdefault Sign Inemc2Bubbles

  11. TIP Proposal Preparation Kit Exhibit 4. The NIST-1022A Form, "Other Joint Venture Members".

    E-Print Network [OSTI]

    Magee, Joseph W.

    TIP Proposal Preparation Kit 2010 61 Exhibit 4. The NIST-1022A Form, "Other Joint Venture Members to identify specific information on each joint venture member (exclud- ing the organization submitting in the organization to be contacted regarding technical portion of the proposal), and Congressional District (home

  12. Rho-form for fibrations

    E-Print Network [OSTI]

    Azzali, Sara

    2007-01-01T23:59:59.000Z

    In this paper we construct the generalization of the Cheeger-Gromov L^2-rho-invariant in the case of families. It is in fact a differential form: given a family of Dirac-type operators along the fibres of a fibration M--> B and a second fibration of normal G-coverings of the fibres, the rho-form is defined as the difference between the eta-form of Bismut and Cheeger and an L^2-eta-form, whose meaning is here given. Some hypothesis on the spectrum of the family of operators on the covering fibres must be made, to construct the L^2-eta-form. The delicate point is in fact in the t--> \\infty-asymptotic of the heat operator for the Bismut superconnection on the covering. First we consider a strong hypothesis (unifom invertibility for the two families of operators): in this case the L^2-eta-form is well defined. This situation occurs for example in the case of a fibration of spin manifolds with vertical metric of positive scalar curvature. Here we also prove that rho-form is constant on the connected components of ...

  13. International energy: Research organizations, 1988--1992. Revision 1

    SciTech Connect (OSTI)

    Hendricks, P.; Jordan, S. [eds.] [USDOE Office of Scientific and Technical Information, Oak Ridge, TN (United States)

    1993-06-01T23:59:59.000Z

    This publication contains the standardized names of energy research organizations used in energy information databases. Involved in this cooperative task are (1) the technical staff of the US DOE Office of Scientific and Technical Information (OSTI) in cooperation with the member countries of the Energy Technology Data Exchange (ETDE) and (2) the International Nuclear Information System (INIS). ETDE member countries are also members of the International Nuclear Information System (INIS). Nuclear organization names recorded for INIS by these ETDE member countries are also included in the ETDE Energy Database. Therefore, these organization names are cooperatively standardized for use in both information systems. This publication identifies current organizations doing research in all energy fields, standardizes the format for recording these organization names in bibliographic citations, assigns a numeric code to facilitate data entry, and identifies report number prefixes assigned by these organizations. These research organization names may be used in searching the databases ``Energy Science & Technology`` on DIALOG and ``Energy`` on STN International. These organization names are also used in USDOE databases on the Integrated Technical Information System. Research organizations active in the past five years, as indicated by database records, were identified to form this publication. This directory includes approximately 31,000 organizations that reported energy-related literature from 1988 to 1992 and updates the DOE Energy Data Base: Corporate Author Entries.

  14. Organizing a Marketing Club

    E-Print Network [OSTI]

    Smith, Jackie; Waller, Mark L.; Anderson, Carl; Welch, Mark

    2008-10-21T23:59:59.000Z

    media. It is best to already have the next meeting (organizational meeting) scheduled so that the marketing workshop participants can be in- formed during the workshop. Organizational Meeting The organizational meeting is likely the most important...

  15. Residential California adobe : mud form

    E-Print Network [OSTI]

    Daymond, Diana Leigh

    1985-01-01T23:59:59.000Z

    Northern California has a rich tradition of adobe architecture . Formed with earth, defined by site, climate and use, the adobe structures exemplify a building methodology in harmony with nature and the lifestyle of it's ...

  16. Introduction to differential forms II

    E-Print Network [OSTI]

    1998-04-13T23:59:59.000Z

    left hand integral is precisely the induced voltage and the right side is related to the strength of the ... The electromagnetic field can be represented by a 2-form.

  17. FORMS AND INSTRUCTIONS FOR SUBMITTING

    E-Print Network [OSTI]

    CALIFORNIA ENERGY COMMISSION FORMS AND INSTRUCTIONS FOR SUBMITTING RETAIL ELECTRICITY PRICE DATA Schwarzenegger, Governor #12;2 CALIFORNIA ENERGY COMMISSION Mignon Marks Principal Author Ruben Tavares Project Manager David Ashuckian Manager ELECTRICITY ANALYSIS OFFICE Scott W. Matthews Deputy Director ELECTRICITY

  18. APPLICATION FORM For participating in

    E-Print Network [OSTI]

    Subramanian, Venkat

    APPLICATION FORM For participating in International Experience in Energy, Environmental EECE 401, 3 credits The Department of Energy, Environmental and Chemical Engineering is pleased lectures, technical projects and other visits. In 2012, the class will be visiting UNICAMP, Brazil

  19. Organic solvent topical report

    SciTech Connect (OSTI)

    Cowley, W.L.

    1998-04-30T23:59:59.000Z

    This report is the technical basis for the accident and consequence analyses used in the Hanford Tank Farms Basis for Interim Operation. The report also contains the scientific and engineering information and reference material needed to understand the organic solvent safety issue. This report includes comments received from the Chemical Reactions Subcommittee of the Tank Advisory Panel.

  20. LETTRES A LA RDACTION LE MODLE STATISTIQUE

    E-Print Network [OSTI]

    Boyer, Edmond

    cultivation of new forms of thinking and social practice, the occupations illustrate new critical://www.jstor.org/page/info/about/policies/terms.jsp . JSTOR is a not-for-profit service that helps scholars, researchers, and students discover, use to increase productivity and facilitate new forms of scholarship. For more information about JSTOR, please

  1. Method for forming metal contacts

    DOE Patents [OSTI]

    Reddington, Erik; Sutter, Thomas C; Bu, Lujia; Cannon, Alexandra; Habas, Susan E; Curtis, Calvin J; Miedaner, Alexander; Ginley, David S; Van Hest, Marinus Franciscus Antonius Maria

    2013-09-17T23:59:59.000Z

    Methods of forming metal contacts with metal inks in the manufacture of photovoltaic devices are disclosed. The metal inks are selectively deposited on semiconductor coatings by inkjet and aerosol apparatus. The composite is heated to selective temperatures where the metal inks burn through the coating to form an electrical contact with the semiconductor. Metal layers are then deposited on the electrical contacts by light induced or light assisted plating.

  2. Sources: Energy Information Administration, Form EIA-182,

    U.S. Energy Information Administration (EIA) Indexed Site

    Sources: Energy Information Administration, Form EIA-182, "Domestic Crude Oil First Purchase Report"; Form EIA-856, "Monthly Foreign Crude Oil Acquisition Report"; and Form EIA-14,...

  3. Better Buildings Residential Network Membership Form | Department...

    Energy Savers [EERE]

    Membership Form Better Buildings Residential Network Membership Form Membership form from the U.S. Department of Energy's Better Buildings Residential Network Recommended...

  4. TFB:TPDSi2 interfacial layer usable in organic photovoltaic cells

    DOE Patents [OSTI]

    Marks, Iobin J. (Evanston, IL); Hains, Alexander W. (Evanston, IL)

    2011-02-15T23:59:59.000Z

    The present invention, in one aspect, relates to a solar cell. In one embodiment, the solar cell includes an anode; an active organic layer comprising an electron-donating organic material and an electron-accepting organic material; and an interfacial layer formed between the anode and active organic layer, where the interfacial layer comprises a hole-transporting polymer characterized with a hole-mobility higher than that of the electron-donating organic material in the active organic layer, and a small molecule that has a high hole-mobility and is capable of crosslinking on contact with air.

  5. Biogeochemical processes governing exposure and uptake of organic pollutant compounds in aquatic organisms. Environmental Health Perspectives

    E-Print Network [OSTI]

    John W. Farrington

    1991-01-01T23:59:59.000Z

    This paper reviews current knowledge of biogeochemical cycles of pollutant organic chemicals in aquatic ecosystems with a focus on coastal ecosystems. There is a bias toward discussng chemkal and geochemical aspects ofbiogeochemical cycles and an emphasis on hydrophobic organic compounds such as polynuckar aromatic hydrocarbons, polychlorinated biphenyls, and chlorinated organic compounds used as pesticides. The complexity of mixtures of pollutant organic compounds, their various modes of entering ecosystems, and their physical chemical forms are discussed. Important factors that influence bioavailability and disposition (e.g., organism-water partitioning, uptake via food, food meb transfer) are reviewed. These factors include solubilities of chemicals; partitioning of chemicals between solid surfaces, colloids, and soluble phases; variables rates of sorption, desorption; and physiological status of organism. It appears that more emphasis on considering food as a source of uptake and bioaccumulation is important in benthic and epibenthic ecosystems when sediment-associated pollutants are a nt source of input to an aquatic ecosystem. Progress with mathematical models for exposure and uptake of contaminant chemicals is discussed briefly.

  6. Perturbation Theory From Automorphic Forms

    E-Print Network [OSTI]

    Neil Lambert; Peter West

    2010-05-12T23:59:59.000Z

    Using our previous construction of Eisenstein-like automorphic forms we derive formulae for the perturbative and non-perturbative parts for any group and representation. The result is written in terms of the weights of the representation and the derivation is largely group theoretical. Specialising to the E_{n+1} groups relevant to type II string theory and the representation associated with node n+1 of the E_{n+1} Dynkin diagram we explicitly find the perturbative part in terms of String Theory variables, such as the string coupling g_d and volume V_n. For dimensions seven and higher we find that the perturbation theory involves only two terms. In six dimensions we construct the SO(5,5) automorphic form using the vector representation. Although these automorphic forms are generally compatible with String Theory, the one relevant to R^4 involves terms with g_d^{-6} and so is problematic. We then study a constrained SO(5,5) automorphic form, obtained by summing over null vectors, and compute its perturbative part. We find that it is consistent with String Theory and makes precise predictions for the perturbative results. We also study the unconstrained automorphic forms for E_6 in the 27 representation and E_7 in the 133 representation, giving their perturbative part and commenting on their role in String Theory.

  7. Group Study Room Policy and Reservation Form

    E-Print Network [OSTI]

    Reynolds, Albert C.

    to the Group Study Reservation Form. Fill out the web form and click "Send" to submit the request. A confirming

  8. FORMS AND INSTRUCTIONS FOR SUBMITTING ELECTRIC

    E-Print Network [OSTI]

    CALIFORNIA ENERGY COMMISSION FORMS AND INSTRUCTIONS FOR SUBMITTING ELECTRIC TRANSMISSION Instructions for Electric Transmission Forms ............................................................. 6 General Instructions

  9. CONTACTS FOR INFORMATION MANAGEMENT: Forms, Information Collection...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CONTACTS FOR INFORMATION MANAGEMENT: Forms, Information Collection, Privacy & Records CONTACTS FOR INFORMATION MANAGEMENT: Forms, Information Collection, Privacy & Records Troy...

  10. Student Refund Appeal Form Use this form if

    E-Print Network [OSTI]

    Karsai, Istvan

    documentation. Retain a copy for yourself and return completed form to: ETSU Office of the Registrar Box 70561 101 Burgin Dossett Hall Johnson City, Tennessee 37614 To review ETSU policies for refunds please go to: http://www.etsu.edu/fa/fs/bursar/tuitioninfo/Fee_Adj_Refund_Policy.aspx Date: Name: Please choose one

  11. Allies in Sport Organizations

    E-Print Network [OSTI]

    Melton, Elizabeth

    2012-10-19T23:59:59.000Z

    Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOSPHY Approved by: Chair of Committee, George B. Cunningham Committee Members, Kathi Miner Gregg... Chair of Advisory Committee: Dr. George B. Cunningham Employee support is a key factor in creating more welcoming and accepting work environments for lesbian, gay, bisexual, and transgender (LGBT) individuals in sport. As such, organizations need...

  12. Metal-Organic Frameworks for Highly Selective Separations

    SciTech Connect (OSTI)

    Omar M. Yaghi

    2009-09-28T23:59:59.000Z

    This grant was focused on the study of metal-organic frameworks with these specific objectives. (1) To examine the use of MOFs with well-defined open metal sites for binding of gases and small organics. (2) To develop a strategy for producing MOFs that combine large pore size with high surface area for their use in gas adsorption and separation of polycyclic organic compounds. (3) To functionalize MOFs for the storage of inert gases such as methane. A brief outline of our progress towards these objectives is presented here as it forms part of the basis for the ideas to be developed under the present proposal.

  13. Second-harmonic generation in transition-metal-organic compounds

    SciTech Connect (OSTI)

    Frazier, C.C.; Harvey, M.A.; Cockerham, M.P.; Hand, H.M.; Chauchard, E.A.; Lee, C.H.

    1986-10-23T23:59:59.000Z

    The second-harmonic generation efficiencies of over 60 transition-metal-organic compounds in powder form were measured, using 1.06 ..mu..m light from a Nd:YAG laser. Most of the studied compounds were either group VI metal carbonyl arene, pyridyl, or chiral phosphine complexes. Four the complexes doubled the laser fundamental as well as or better than ammonium dihydrogen phosphate (ADP). The study shows that the same molecular features (e.g., conjugation and low-lying spectroscopic charge transfer) that contribute to second-order optical nonlinearity in organic compounds also enhance second-order effects in transition-metal-organic compounds.

  14. Substrate system for spray forming

    DOE Patents [OSTI]

    Chu, Men G. (Export, PA); Chernicoff, William P. (Harrisburg, PA)

    2002-01-01T23:59:59.000Z

    A substrate system for receiving a deposit of sprayed metal droplets including a movable outer substrate on which the sprayed metal droplets are deposited. The substrate system also includes an inner substrate disposed adjacent the outer substrate where the sprayed metal droplets are deposited on the outer substrate. The inner substrate includes zones of differing thermal conductivity to resist substrate layer porosity and to resist formation of large grains and coarse constituent particles in a bulk layer of the metal droplets which have accumulated on the outer substrate. A spray forming apparatus and associated method of spray forming a molten metal to form a metal product using the substrate system of the invention is also provided.

  15. Substrate system for spray forming

    DOE Patents [OSTI]

    Chu, Men G. (Export, PA); Chernicoff, William P. (Harrisburg, PA)

    2000-01-01T23:59:59.000Z

    A substrate system for receiving a deposit of sprayed metal droplets including a movable outer substrate on which the sprayed metal droplets are deposited. The substrate system also includes an inner substrate disposed adjacent the outer substrate where the sprayed metal droplets are deposited on the outer substrate. The inner substrate includes zones of differing thermal conductivity to resist substrate layer porosity and to resist formation of large grains and coarse constituent particles in a bulk layer of the metal droplets which have accumulated on the outer substrate. A spray forming apparatus and associated method of spray forming a molten metal to form a metal product using the substrate system of the invention is also provided.

  16. Method of forming structural heliostat

    DOE Patents [OSTI]

    Anderson, Alfred J. (Littleton, CO)

    1984-06-26T23:59:59.000Z

    In forming a heliostat having a main support structure and pivoting and tilting motors and gears and a mirror module for reflecting solar energy onto a collector, the improvement characterized by a method of forming the mirror module in which the mirror is laid upon a solid rigid supporting bed in one or more sections, with or without focusing; a mirror backing sheet is applied by first applying respective thin layers of silicone grease and, thereafter, progressively rolling application to eliminate air bubbles; followed by affixing of a substrate assembly to the mirror backing sheet to form a mirror module that does not curve because of thermally induced stresses and differential thermal expansion or contraction effects. The silicone grease also serves to dampen fluttering of the mirror and protect the mirror backside against adverse effects of the weather. Also disclosed are specific details of preferred embodiments.

  17. Mechanically flexible organic electroluminescent device with directional light emission

    DOE Patents [OSTI]

    Duggal, Anil Raj; Shiang, Joseph John; Schaepkens, Marc

    2005-05-10T23:59:59.000Z

    A mechanically flexible and environmentally stable organic electroluminescent ("EL") device with directional light emission comprises an organic EL member disposed on a flexible substrate, a surface of which is coated with a multilayer barrier coating which includes at least one sublayer of a substantially transparent organic polymer and at least one sublayer of a substantially transparent inorganic material. The device includes a reflective metal layer disposed on the organic EL member opposite to the substrate. The reflective metal layer provides an increased external quantum efficiency of the device. The reflective metal layer and the multilayer barrier coating form a seal around the organic EL member to reduce the degradation of the device due to environmental elements.

  18. Forms | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental Assessments (EA)Budget(DANCE) TargetForms & DocumentsForms

  19. Award Recipient Poudre Valley Health System

    E-Print Network [OSTI]

    Magee, Joseph W.

    spectrum of health care services, including emergency/urgent, intensive, medical/surgical, maternal/ child owned and private, not-for-profit health care organization serving residents of northern Colorado, Nebraska, and Wyoming. In two acute care hospitals and a network of other facilities, PVHS offers a full

  20. West Michigan Strategic Alliance Greg Northrup, President

    E-Print Network [OSTI]

    West Michigan Strategic Alliance Greg Northrup, President 951 Wealthy Street SE P.O. Box 68046://www.wm-alliance.org/ The West Michigan Strategic Alliance (WMSA) is a 501 (C)3 not-for-profit organization comprised in creating regional partnerships and collaborations. The vision of WMSA is to make West Michigan a best place

  1. Premier Inc. Serving 1,700 hospitals and more than 43,000 other health

    E-Print Network [OSTI]

    reducing the cost of care. Owned by 200 not-for- profit health care providers and health system organizations, the alliance enables the owners to share services and programs aimed at improving the quality services: group purchasing and supply chain management, insurance and risk management, and informatics

  2. Method of making organic light emitting devices

    DOE Patents [OSTI]

    Shiang, Joseph John (Niskayuna, NY); Janora, Kevin Henry (Schenectady, NY); Parthasarathy, Gautam (Saratoga Springs, NY); Cella, James Anthony (Clifton Park, NY); Chichak, Kelly Scott (Clifton Park, NY)

    2011-03-22T23:59:59.000Z

    The present invention provides a method for the preparation of organic light-emitting devices comprising a bilayer structure made by forming a first film layer comprising an electroactive material and an INP precursor material, and exposing the first film layer to a radiation source under an inert atmosphere to generate an interpenetrating network polymer composition comprising the electroactive material. At least one additional layer is disposed on the reacted first film layer to complete the bilayer structure. The bilayer structure is comprised within an organic light-emitting device comprising standard features such as electrodes and optionally one or more additional layers serving as a bipolar emission layer, a hole injection layer, an electron injection layer, an electron transport layer, a hole transport layer, exciton-hole transporting layer, exciton-electron transporting layer, a hole transporting emission layer, or an electron transporting emission layer.

  3. Organic complexant topical report. Revision 1

    SciTech Connect (OSTI)

    Meacham, J.E.; and others

    1997-06-26T23:59:59.000Z

    This document reviews the current understanding of hazards associated with the storage of organic complexant salts in Hanford Site high-level waste tanks. Two distinct hazards were evaluated: spontaneous self- accelerating decomposition reactions in the bulk material (bulk runaway) and ignition followed by condensed phase propagation (point source ignition). Results from the bulk runaway assessment showed that bulk runaway is not credible for all tanks except C-106. However, speciation of the organic in C-106 shows that it is almost all in the form of low energy oxalate, and there is little potential for a bulk runaway. Additional testing and evaluation would be necessary to definitely conclude that there is no potential for bulk runaway; therefore, controls are currently required for his tank. Temperature monitoring and controls (water addition and active ventilation) are adequate to prevent bulk runaway in C-106.

  4. Technetium Immobilization Forms Literature Survey

    SciTech Connect (OSTI)

    Westsik, Joseph H.; Cantrell, Kirk J.; Serne, R. Jeffrey; Qafoku, Nikolla

    2014-05-01T23:59:59.000Z

    Of the many radionuclides and contaminants in the tank wastes stored at the Hanford site, technetium-99 (99Tc) is one of the most challenging to effectively immobilize in a waste form for ultimate disposal. Within the Hanford Tank Waste Treatment and Immobilization Plant (WTP), the Tc will partition between both the high-level waste (HLW) and low-activity waste (LAW) fractions of the tank waste. The HLW fraction will be converted to a glass waste form in the HLW vitrification facility and the LAW fraction will be converted to another glass waste form in the LAW vitrification facility. In both vitrification facilities, the Tc is incorporated into the glass waste form but a significant fraction of the Tc volatilizes at the high glass-melting temperatures and is captured in the off-gas treatment systems at both facilities. The aqueous off-gas condensate solution containing the volatilized Tc is recycled and is added to the LAW glass melter feed. This recycle process is effective in increasing the loading of Tc in the LAW glass but it also disproportionally increases the sulfur and halides in the LAW melter feed which increases both the amount of LAW glass and either the duration of the LAW vitrification mission or the required supplemental LAW treatment capacity.

  5. Spin-forming Project Report

    SciTech Connect (OSTI)

    Switzner, Nathan; Henry, Dick

    2009-03-20T23:59:59.000Z

    In a second development order, spin-forming equipment was again evaluated using the test shape, a hemispherical shell. In this second development order, pure vanadium and alloy titanium (Ti-6Al-4V) were spin-formed, as well as additional copper and 21-6-9 stainless. In the first development order the following materials had been spin-formed: copper (alloy C11000 ETP), 6061 aluminum, 304L stainless steel, 21-6-9 stainless steel, and tantalum-2.5% tungsten. Significant challenges included properly adjusting the rotations-per-minute (RPM), cracking at un-beveled edges and laser marks, redressing of notches, surface cracking, non-uniform temperature evolution in the titanium, and cracking of the tailstock. Lessons learned were that 300 RPM worked better than 600 RPM for most materials (at the feed rate of 800 mm/min); beveling the edges to lower the stress reduces edge cracking; notches, laser marks, or edge defects in the preform doom the process to cracking and failure; coolant is required for vanadium spin-forming; increasing the number of passes to nine or more eliminates surface cracking for vanadium; titanium develops a hot zone in front of the rollers; and the tailstock should be redesigned to eliminate the cylindrical stress concentrator in the center.

  6. Team Excellence Award Nomination Form

    E-Print Network [OSTI]

    Dennett, Daniel

    Team Excellence Award Nomination Form Printed: Tuesday, July 30, 2013 1. Team name: 2. Enter the full names and titles of all team members: 3. Who does this team serve and how did they go above sentences. 4. How did this team develop effective relationships and use resources creatively? Please limit

  7. Banner Advancement Account Request Form

    E-Print Network [OSTI]

    Karsai, Istvan

    Banner Advancement Account Request Form ETSU Office of Information Technology 424 Roy Nicks Hall, Box 70728 Johnson City, Tennessee 37614 (423) 439-4648 oithelp@etsu.edu This section for use ______________________________________________________________________________________ [last] [first] [middle] ETSU Domain Name _____________________@etsu.edu School / College

  8. Document: Outside Employment/ Consulting Form

    E-Print Network [OSTI]

    Quigg, Chris

    Document: Outside Employment/ Consulting Form Document #: SO-2 Issue date: 8/21/09 Revision #: 3 on the WDRS website. OUTSIDE EMPLOYMENT/CONSULTING Fermilab employees are entitled to the same rights and privileges with respect to outside employment as other citizens. Therefore, there is no general prohibition

  9. COMPLIANCE FORMS SUMMARY APPENDIX A

    E-Print Network [OSTI]

    approach is utilized for compliance, the CF-1R forms are produced by the compliance software. Thermal Mass. Thermal Mass Worksheet (WS-1R) This worksheet is completed by the documentation author when complying is used to calculate weight-averaged U-factors for prescriptive envelope compliance. #12;Appendix

  10. Report Form for Program Termination

    E-Print Network [OSTI]

    Saskatchewan, University of

    Report Form for Program Termination Program(s) to be deleted: Effective date of termination: 1. List reasons for termination and describe the background leading to this decision. 2. Technical the last five years. #12;3. Impact of the termination. Internal 3.1 What if any impact

  11. UWO Vehicle ACCIDENT REPORTING FORM

    E-Print Network [OSTI]

    Sinnamon, Gordon J.

    UWO Vehicle ­ ACCIDENT REPORTING FORM To be completed at the scene. (Important: Do not admit liability or discuss any settlement.) If there are personal injuries or severe damage to the vehicle, call 911. If vehicle is drivable and if it's safe to do so, pull to the side of road away from traffic. Put

  12. Accident Report Form Victim's Name

    E-Print Network [OSTI]

    Amin, S. Massoud

    Accident Report Form Date: Victim's Name: Address: Classification: Program Area: Activity: Brief Description of Accident: Body Fluid Spill: Action Taken by DRS Employee: Witness Name: Witness Address:____________________________________ DOB: Intramurals Front Back Revision - 2011 **Location of Accident** URC North Gymnasium URC South

  13. Neighborhood Progress Through Organized Action.

    E-Print Network [OSTI]

    Newman, Eula; Cox, Bonnie; Martin, E. C.

    1955-01-01T23:59:59.000Z

    [Blank Page in Original Bulletin] ~ei~ h borhood Progress Through Organized Action E. C. MARTIN, Administrative Assistant BONNIE COX, Organization Specialist MRS. EULA NEWMAN, Specialist in Home Management TEXAS A. & M. COLLEGE SYSTEM "The... coord: lent r peo plt 1. mmunity organization is successful when all families erested groups participate. Such an organization may inate interest in the community and provide an excel- neans for channeling most programs. The interest...

  14. Organic light emitting diodes with structured electrodes

    DOE Patents [OSTI]

    Mao, Samuel S.; Liu, Gao; Johnson, Stephen G.

    2012-12-04T23:59:59.000Z

    A cathode that contain nanostructures that extend into the organic layer of an OLED has been described. The cathode can have an array of nanotubes or a layer of nanoclusters extending out from its surface. In another arrangement, the cathode is patterned and etched to form protruding nanostructures using a standard lithographic process. Various methods for fabricating these structures are provided, all of which are compatible with large-scale manufacturing. OLEDs made with these novel electrodes have greatly enhanced electron injection, have good environmental stability.

  15. Organization | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you sure you wantJoin us for #SpaceWeekOMB Policies2.0 OpenOrganization

  16. All Lab Organizations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMForms About BecomeTechnologies | Blandine JeromeOrganizations All

  17. Nuclear Organization and Genome Function

    E-Print Network [OSTI]

    Corces, Victor G.

    Nuclear Organization and Genome Function Kevin Van Bortle and Victor G. Corces Department-range interactions and have proposed roles in nuclear organization. In this review, we explore recent findings for the roles of insulators in nuclear organization. 163 Annu.Rev.CellDev.Biol.2012.28:163-187.Downloadedfromwww

  18. Persistent Organic By Steven Jackson

    E-Print Network [OSTI]

    Toohey, Darin W.

    Persistent Organic Pollutants By Steven Jackson #12;What are POP's? POP's are organic compounds, rivers and surface ocean water. Bio accumulation- POPs work their way through the food chain by accumulating in the body fat of living organisms and becoming more concentrated as they move from one creature

  19. Mesoscale Quantization and Self-Organized Stability

    E-Print Network [OSTI]

    Randall D. Peters

    2005-06-16T23:59:59.000Z

    In the world of technology, one of the most important forms of friction is that of rolling friction. Yet it is one of the least studied of all the known forms of energy dissipation. In the present experiments we investigate the oscillatory free-decay of a rigid cube, whose side-length is less than the diameter of the rigid cylinder on which it rests. The resulting free-decay is one of harmonic motion with damping. The non-dissipative character of the oscillation yields to a linear differential equation; however, the damping is found to involve more than a deterministic nonlinearity. Dominated by rolling friction, the damping is sensitive to the material properties of the contact surfaces. For `clean' surfaces of glass on glass, the decay shows features of mesoscale quantization and self-organized stability.

  20. Unsplit bipolar pulse forming line

    DOE Patents [OSTI]

    Rhodes, Mark A. (Pleasanton, CA)

    2011-05-24T23:59:59.000Z

    A bipolar pulse forming transmission line module and system for linear induction accelerators having first, second, third, and fourth planar conductors which form a sequentially arranged interleaved stack having opposing first and second ends, with dielectric layers between the conductors. The first and second planar conductors are connected to each other at the first end, and the first and fourth planar conductors are connected to each other at the second end via a shorting plate. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short at the first end a high voltage from the third planar conductor to the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  1. Method of forming a joint

    DOE Patents [OSTI]

    Butt, Darryl Paul; Cutler, Raymond Ashton; Rynders, Steven Walton; Carolan, Michael Francis

    2006-08-22T23:59:59.000Z

    A method of joining at least two sintered bodies to form a composite structure, including providing a first multicomponent metallic oxide having a perovskitic or fluorite crystal structure; providing a second sintered body including a second multicomponent metallic oxide having a crystal structure of the same type as the first; and providing at an interface a joint material containing at least one metal oxide containing at least one metal identically contained in at least one of the first and second multicomponent metallic oxides. The joint material is free of cations of Si, Ge, Sn, Pb, P and Te and has a melting point below the sintering temperatures of both sintered bodies. The joint material is heated to a temperature above the melting point of the metal oxide(s) and below the sintering temperatures of the sintered bodies to form the joint. Structures containing such joints are also disclosed.

  2. Method of forming clathrate ice

    DOE Patents [OSTI]

    Hino, Toshiyuki (Tokyo, JP); Gorski, Anthony J. (Lemont, IL)

    1987-01-01T23:59:59.000Z

    A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultrasonically so that small crystals are formed in the liquid. These small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

  3. Method of forming calthrate ice

    DOE Patents [OSTI]

    Hino, T.; Gorski, A.J.

    1985-09-30T23:59:59.000Z

    A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultransonically so that small crystals are formed in the liquid. Thes small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

  4. Microorganisms for producing organic acids

    DOE Patents [OSTI]

    Pfleger, Brian Frederick; Begemann, Matthew Brett

    2014-09-30T23:59:59.000Z

    Organic acid-producing microorganisms and methods of using same. The organic acid-producing microorganisms comprise modifications that reduce or ablate AcsA activity or AcsA homolog activity. The modifications increase tolerance of the microorganisms to such organic acids as 3-hydroxypropionic acid, acrylic acid, propionic acid, lactic acid, and others. Further modifications to the microorganisms increase production of such organic acids as 3-hydroxypropionic acid, lactate, and others. Methods of producing such organic acids as 3-hydroxypropionic acid, lactate, and others with the modified microorganisms are provided. Methods of using acsA or homologs thereof as counter-selectable markers are also provided.

  5. Fuzzy logic of Aristotelian forms

    SciTech Connect (OSTI)

    Perlovsky, L.I. [Nichols Research Corp., Lexington, MA (United States)

    1996-12-31T23:59:59.000Z

    Model-based approaches to pattern recognition and machine vision have been proposed to overcome the exorbitant training requirements of earlier computational paradigms. However, uncertainties in data were found to lead to a combinatorial explosion of the computational complexity. This issue is related here to the roles of a priori knowledge vs. adaptive learning. What is the a-priori knowledge representation that supports learning? I introduce Modeling Field Theory (MFT), a model-based neural network whose adaptive learning is based on a priori models. These models combine deterministic, fuzzy, and statistical aspects to account for a priori knowledge, its fuzzy nature, and data uncertainties. In the process of learning, a priori fuzzy concepts converge to crisp or probabilistic concepts. The MFT is a convergent dynamical system of only linear computational complexity. Fuzzy logic turns out to be essential for reducing the combinatorial complexity to linear one. I will discuss the relationship of the new computational paradigm to two theories due to Aristotle: theory of Forms and logic. While theory of Forms argued that the mind cannot be based on ready-made a priori concepts, Aristotelian logic operated with just such concepts. I discuss an interpretation of MFT suggesting that its fuzzy logic, combining a-priority and adaptivity, implements Aristotelian theory of Forms (theory of mind). Thus, 2300 years after Aristotle, a logic is developed suitable for his theory of mind.

  6. A Catenated Strut in a Catenated MetalOrganic Framework

    SciTech Connect (OSTI)

    Li, Qiaowei [Fudan Univ., Shanghai (China); Sue, Chi-Hau [Univ. of California, Los Angeles, CA (United States); Basu, Subhadeep [Northwestern Univ., Evanston, IL (United States); Shveyd, Alexander K. [Northwestern Univ., Evanston, IL (United States); Zhang, Wenyu [Univ. of California, Los Angeles, CA (United States); Barin, Gokhan [Northwestern Univ., Evanston, IL (United States); Fang, Lei [Northwestern Univ., Evanston, IL (United States); Sarjeant, Amy A. [Northwestern Univ., Evanston, IL (United States); Stoddart, J. Fraser [Northwestern Univ., Evanston, IL (United States); Yaghi, Omar M [Univ. of California, Los Angeles, CA (United States)

    2010-01-01T23:59:59.000Z

    Mechanically interlocked molecules (MIMs), in the form of donoracceptor [2]catenane-containing struts of exceptional length, have been incorporated into a three-dimensional catenated metalorganic framework (MOF) at precise locations and with uniform relative orientations. Catenation is expressed simultaneously within the struts and the framework.

  7. Nonequilibrium atmospheric secondary organic aerosol formation and growth

    E-Print Network [OSTI]

    Dabdub, Donald

    to a reduction in visibility (2). On a global scale, airborne particles scatter solar radiation and can act as cloud condensation (CCN) and ice nuclei (IN), influencing the radiative balance of the atmosphere (3, 4 roles in air quality, health effects, vis- ibility, and climate. Secondary organic aerosols (SOA) formed

  8. Composites for removing metals and volatile organic compounds and method thereof

    DOE Patents [OSTI]

    Coronado, Paul R. (Livermore, CA); Coleman, Sabre J. (Oakland, CA); Reynolds, John G. (San Ramon, CA)

    2006-12-12T23:59:59.000Z

    Functionalized hydrophobic aerogel/solid support structure composites have been developed to remove metals and organic compounds from aqueous and vapor media. The targeted metals and organics are removed by passing the aqueous or vapor phase through the composite which can be in molded, granular, or powder form. The composites adsorb the metals and the organics leaving a purified aqueous or vapor stream. The species-specific adsorption occurs through specific functionalization of the aerogels tailored towards specific metals and/or organics. After adsorption, the composites can be disposed of or the targeted metals and/or organics can be reclaimed or removed and the composites recycled.

  9. Reactions Between Water Soluble Organic Acids and Nitrates in Atmospheric Aerosols: Recycling of Nitric Acid and Formation of Organic Salts

    SciTech Connect (OSTI)

    Wang, Bingbing; Laskin, Alexander

    2014-03-25T23:59:59.000Z

    Atmospheric particles often include a complex mixture of nitrate and secondary organic materials accumulated within the same individual particles. Nitrate as an important inorganic component can be chemically formed in the atmosphere. For instance, formation of sodium nitrate (NaNO3) and calcium nitrate Ca(NO3)2 when nitrogen oxide and nitric acid (HNO3) species react with sea salt and calcite, respectively. Organic acids contribute a significant fraction of photochemically formed secondary organics that can condense on the preexisting nitrate-containing particles. Here, we present a systematic microanalysis study on chemical composition of laboratory generated particles composed of water soluble organic acids and nitrates (i.e. NaNO3 and Ca(NO3)2) investigated using computer controlled scanning electron microscopy with energy dispersive analysis of X-rays (CCSEM/EDX) and Fourier transform infrared micro-spectroscopy (micro-FTIR). The results show that water-soluble organic acids can react with nitrates releasing gaseous HNO3 during dehydration process. These reactions are attributed to acid displacement of nitrate with weak organic acids driven by the evaporation of HNO3 into gas phase due to its relatively high volatility. The reactions result in significant nitrate depletion and formation of organic salts in mixed organic acids/nitrate particles that in turn may affect their physical and chemical properties relevant to atmospheric environment and climate. Airborne nitrate concentrations are estimated by thermodynamic calculations corresponding to various nitrate depletions in selected organic acids of atmospheric relevance. The results indicate a potential mechanism of HNO3 recycling, which may further affect concentrations of gas- and aerosol-phase species in the atmosphere and the heterogeneous reaction chemistry between them.

  10. Organization Chart and Contacts | Department of Energy

    Office of Environmental Management (EM)

    About the Fuel Cell Technologies Office Organization Chart and Contacts Organization Chart and Contacts Organization Chart and Contacts Contact Information U.S. Department of...

  11. Chemistry of Organic Electronic Materials 6483-Fall

    E-Print Network [OSTI]

    Sherrill, David

    Chemistry of Organic Electronic Materials 6483- Fall Tuesdays organic materials. The discussion will include aspects of synthesis General introduction to the electronic structure of organic materials with connection

  12. The Agenda Setting Powers of Party Organizations /

    E-Print Network [OSTI]

    Waugh, Andrew Scott

    2013-01-01T23:59:59.000Z

    Theory of Parties and Party Organizations . . . . . . . . . .1984. On the Theory of Party Organization. The Journal ofand I offer a new theory of party organizations that more

  13. Above Ground Storage Tank (AST) Inspection Form

    E-Print Network [OSTI]

    Pawlowski, Wojtek

    Above Ground Storage Tank (AST) Inspection Form Petroleum Bulk Storage Form Facility Name.ehs.cornell.edu/env/bulk-material-storage/petroleum-bulk-storage/Documents/AST_Inspection_Form.pdf #12;

  14. Agile and Pro-Active Public Administration as a Collaborative Networked Organization

    E-Print Network [OSTI]

    Cellary, Wojciech

    2011-01-01T23:59:59.000Z

    In highly competitive, globalized economies and societies of always-on-line people intensively using the Internet and mobile phones, public administrations have to adapt to new challenges. Enterprises and citizens expect public administrations to be agile and pro-active to foster development. A way to achieve agility and pro-activity is application of a model of Collaborative Network Organizations in its two forms: Virtual Organizations (VO) and Virtual Organization Breeding Environments (VOBE). In the paper, advantages are shown of public administration playing a role of a Virtual Organization customer on the one hand, and a Virtual Organization member on the other hand. It is also shown how public administration playing a role of a Virtual Organization Breeding Environment may improve its agility and promote advanced technologies and management methods among local organizations. It is argued in the paper that public administration should provide a Virtual Organization Breeding Environment as a part of publi...

  15. Bankruptcy, guns or campaigns : explaining armed organizations' post-war trajectories

    E-Print Network [OSTI]

    Daly, Sarah Zukerman

    2011-01-01T23:59:59.000Z

    This project seeks to explain what happens to armed organizations after they sign peace accords. Why do they dissolve, return to war, or form non-violent socio-political entities (political parties or civic associations)? ...

  16. Polymers via chemical vapor deposition and their application to organic photovoltaics

    E-Print Network [OSTI]

    Barr, Miles Clark

    2012-01-01T23:59:59.000Z

    There is emerging interest in the ability to fabricate organic photovoltaics (OPVs) on flexible, lightweight substrates, which could lower the cost of installation and enable new form factors for deployment. However, ...

  17. HBDR: a case-based tool for organizing architectural information on historic building designs

    E-Print Network [OSTI]

    Mulye, Leena

    2002-01-01T23:59:59.000Z

    , information regarding previous design projects is available in the form of historic photographs, measured drawings, details, descriptive text and notes. This information is currently available from different sources. It must be organized to enable effective...

  18. Oxidative and initiated chemical vapor deposition for application to organic electronics

    E-Print Network [OSTI]

    Im, Sung Gap

    2009-01-01T23:59:59.000Z

    Since the first discovery of polymeric conductors in 1977, the research area of "organic electronics" has grown dramatically. However, methods for forming thin films comprised solely of conductive polymers are limited by ...

  19. Assembly of a Bacteriophage-Based Template for the Organization of Materials into Nanoporous Networks

    E-Print Network [OSTI]

    Hammond, Paula T.

    M13 bacteriophages are assembled via a covalent layer-by-layer process to form a highly nanoporous network capable of organizing nanoparticles and acting as a scaffold for templating metal-oxides. The morphological and ...

  20. CERAMIC WASTE FORM DATA PACKAGE

    SciTech Connect (OSTI)

    Amoroso, J.; Marra, J.

    2014-06-13T23:59:59.000Z

    The purpose of this data package is to provide information about simulated crystalline waste forms that can be used to select an appropriate composition for a Cold Crucible Induction Melter (CCIM) proof of principle demonstration. Melt processing, viscosity, electrical conductivity, and thermal analysis information was collected to assess the ability of two potential candidate ceramic compositions to be processed in the Idaho National Laboratory (INL) CCIM and to guide processing parameters for the CCIM operation. Given uncertainties in the CCIM capabilities to reach certain temperatures throughout the system, one waste form designated 'Fe-MP' was designed towards enabling processing and another, designated 'CAF-5%TM-MP' was designed towards optimized microstructure. Melt processing studies confirmed both compositions could be poured from a crucible at 1600{degrees}C although the CAF-5%TM-MP composition froze before pouring was complete due to rapid crystallization (upon cooling). X-ray diffraction measurements confirmed the crystalline nature and phase assemblages of the compositions. The kinetics of melting and crystallization appeared to vary significantly between the compositions. Impedance spectroscopy results indicated the electrical conductivity is acceptable with respect to processing in the CCIM. The success of processing either ceramic composition will depend on the thermal profiles throughout the CCIM. In particular, the working temperature of the pour spout relative to the bulk melter which can approach 1700{degrees}C. The Fe-MP composition is recommended to demonstrate proof of principle for crystalline simulated waste forms considering the current configuration of INL's CCIM. If proposed modifications to the CCIM can maintain a nominal temperature of 1600{degrees}C throughout the melter, drain, and pour spout, then the CAF-5%TM-MP composition should be considered for a proof of principle demonstration.

  1. Why Do Disks Form Jets?

    E-Print Network [OSTI]

    D Lynden-Bell

    2002-03-27T23:59:59.000Z

    It is argued that jet modelers have given insufficient study to the natural magneto-static configurations of field wound up in the presence of a confining general pressure. Such fields form towers whose height grows with each twist at a velocity comparable to the circular velocity of the accretion disk that turns them. A discussion of the generation of such towers is preceded by a brief history of the idea that quasars, active galaxies, and galactic nuclei contain giant black holes with accretion disks.

  2. WSDNR Forms | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown ofNationwide Permit webpage Jump to: navigation,WSDNR Forms Jump to:

  3. HDOT Forms | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdfGetec AG| Open EnergyGuntersville ElectricControlon State -HDOT Forms Jump to:

  4. FAQs for Survey Forms 914

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade Year-0 Year-1InformationDieselAnnualFORMPageValues shown3 WhatA49Form

  5. ESA Forms | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOE FacilityDimondale,South, NewDyerTier2 Submit SoftwareEPB JumpEQUUSESESA Forms

  6. Arizona Department of Environmental Quality's Application Forms...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Web Site: Arizona Department of Environmental Quality's Application Forms and Guidance Website Abstract This site contains forms...

  7. On Line Beamline Commissioning Activity Approval Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Commissioning Activity Approval Form This form is to be filled by the Commissioning Activity Team Leader. No beamline commissioning activities will be allowed to run without a...

  8. Unexpected, Stable Form of Uranium Detected | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Unexpected, Stable Form of Uranium Detected Unexpected, Stable Form of Uranium Detected Insights on underappreciated reaction could shed light on environmental cleanup options...

  9. INSTRUCTIONS for COMPLETING SCHEDULE CARD WEB FORMS

    E-Print Network [OSTI]

    Kelly Beranger

    2012-03-22T23:59:59.000Z

    Mar 22, 2012 ... Instructions for completing schedule card web forms. The following students are required to complete schedule card web forms. all returning...

  10. Complexant stability investigation. Task 2. Organic complexants

    SciTech Connect (OSTI)

    Martin, E.C.

    1985-06-01T23:59:59.000Z

    The safety of high-level defense waste operations has always been given highest priority at the Hanford site. This document is part of the continued effort to appraise and reevaluate the safety of the waste stored in underground tanks on the Hanford Reservation. Hanford high-level defense waste consists mainly of moist, inorganic salts, NaNO/sub 3/, NaAl(OH)/sub 4/, Na/sub 2/CO/sub 3/, and other sodium salts. However, in addition to these salts, quantities of organic compounds constitute a significant portion of the waste. The potential reaction of the organic compounds with inorganic salts to form explosive substances is examined and found to be nonexistent or negligible. The concept that the waste mixture might react exothermically is found to be untenable under the present storage conditions. The phenomenon of slurry growth in double-shell waste storage tanks is expected to cause no increase in exothermic reaction potential within the waste. The results of this study indicate that the presence of organic material in the high-level defense waste does not constitute undue hazard under the present storage conditions.

  11. Characterisation of lightly oxidised organic aerosol formed from the photochemical aging of diesel exhaust particles

    E-Print Network [OSTI]

    Kroll, Jesse

    The oxidative aging of the semivolatile fraction of diesel exhaust aerosol is studied in order to better understand the influence of oxidation reactions on particle chemical composition. Exhaust is sampled from an idling ...

  12. Organic Photovoltaic Cells with an Electric Field Integrally-Formed at the

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeedingBiomass and Biofuels Biomass and Biofuels FindReclamation -

  13. Method of doping organic semiconductors

    DOE Patents [OSTI]

    Kloc,; Christian Leo (Constance, DE); Ramirez; Arthur Penn (Summit, NJ); So, Woo-Young (New Providence, NJ)

    2010-10-26T23:59:59.000Z

    An apparatus has a crystalline organic semiconducting region that includes polyaromatic molecules. A source electrode and a drain electrode of a field-effect transistor are both in contact with the crystalline organic semiconducting region. A gate electrode of the field-effect transistor is located to affect the conductivity of the crystalline organic semiconducting region between the source and drain electrodes. A dielectric layer of a first dielectric that is substantially impermeable to oxygen is in contact with the crystalline organic semiconducting region. The crystalline organic semiconducting region is located between the dielectric layer and a substrate. The gate electrode is located on the dielectric layer. A portion of the crystalline organic semiconducting region is in contact with a second dielectric via an opening in the dielectric layer. A physical interface is located between the second dielectric and the first dielectric.

  14. Embedding Sustainability into Manufacturing Organizations

    E-Print Network [OSTI]

    Tutterow, V.

    2014-01-01T23:59:59.000Z

    for Sustainability Ratings GISR standard (13) (under development) Accrediting other sustainability ratings, rankings, and indices International Organization for Standardization ISO 14001:2004 Environmental Management Systems Requirements with Guidance for Use (22...) Environmental management system criteria International Organization for Standardization ISO 14064:2006 (parts 1,2,3) (23) Principles and requirements on GHG quantification, reporting, and verification International Organization for Standardization ISO 50001...

  15. Organic photovoltaic device with interfacial layer and method of fabricating same

    DOE Patents [OSTI]

    Marks, Tobin J.; Hains, Alexander W.

    2013-03-19T23:59:59.000Z

    An organic photovoltaic device and method of forming same. In one embodiment, the organic photovoltaic device has an anode, a cathode, an active layer disposed between the anode and the cathode; and an interfacial layer disposed between the anode and the active layer, the interfacial layer comprising 5,5'-bis[(p-trichlorosilylpropylphenyl)phenylamino]-2,2'-bithiophene (PABTSi.sub.2).

  16. Digestive System general organization throughout

    E-Print Network [OSTI]

    Houde, Peter

    Digestive System general organization throughout: mucosa, submucosa, muscularis externa, serosa digestive glands salivary pancreas liver (lobes: right, left, caudate, quadrate, diaphragmatic surface, bare

  17. Appendix b: Forms and Information Appendix b: Forms and Information Updated September 2013

    E-Print Network [OSTI]

    Hart, Gus

    Pages Template - Thesis ADV Form 11d Preliminary Pages Template - Dissertation ADV Form 12 Student Dissertation Publishing ADV Form 14 Survey of Earned Doctorate Link to current GS forms: http

  18. Miscellaneous Waste-Form FEPs

    SciTech Connect (OSTI)

    A. Schenker

    2000-12-08T23:59:59.000Z

    The US DOE must provide a reasonable assurance that the performance objectives for the Yucca Mountain Project (YMP) potential radioactive-waste repository can be achieved for a 10,000-year post-closure period. The guidance that mandates this direction is under the provisions of 10 CFR Part 63 and the US Department of Energy's ''Revised Interim Guidance Pending Issuance of New US Nuclear Regulatory Commission (NRC) Regulations (Revision 01, July 22, 1999), for Yucca Mountain, Nevada'' (Dyer 1999 and herein referred to as DOE's Interim Guidance). This assurance must be demonstrated in the form of a performance assessment that: (1) identifies the features, events, and processes (FEPs) that might affect the performance of the potential geologic repository; (2) examines the effects of such FEPs on the performance of the potential geologic repository; (3) estimates the expected annual dose to a specified receptor group; and (4) provides the technical basis for inclusion or exclusion of specific FEPs.

  19. Alumina forming iron base superalloy

    DOE Patents [OSTI]

    Yamamoto, Yukinori; Muralidharan, Govindarajan; Brady, Michael P.

    2014-08-26T23:59:59.000Z

    An austenitic stainless steel alloy, consists essentially of, in weight percent 2.5 to 4 Al; 25 to 35 Ni; 12 to 19 Cr; at least 1, up to 4 total of at least one element selected from the group consisting of Nb and Ta; 0.5 to 3 Ti; less than 0.5 V; 0.1 to 1 of at least on element selected from the group consisting of Zr and Hf; 0.03 to 0.2 C; 0.005 to 0.1 B; and base Fe. The weight percent Fe is greater than the weight percent Ni. The alloy forms an external continuous scale including alumina, and contains coherent precipitates of .gamma.'-Ni.sub.3Al, and a stable essentially single phase FCC austenitic matrix microstructure. The austenitic matrix is essentially delta-ferrite-free and essentially BCC-phase-free.

  20. Extension of Chern-Simons forms

    SciTech Connect (OSTI)

    Konitopoulos, Spyros; Savvidy, George [Demokritos National Research Center, Ag. Paraskevi, Athens (Greece)

    2014-06-15T23:59:59.000Z

    We investigate metric independent, gauge invariant, and closed forms in the generalized Yang-Mills (YM) theory. These forms are polynomial on the corresponding fields strength tensors curvature forms and are analogous to the Pontryagin-Chern densities in the YM gauge theory. The corresponding secondary characteristic classes have been expressed in integral form in analogy with the Chern-Simons form. Because they are not unique, the secondary forms can be dramatically simplified by the addition of properly chosen differentials of one-step-lower-order forms. Their gauge variation can also be found yielding the potential anomalies in the gauge field theory.

  1. Method of forming an electrically conductive cellulose composite

    DOE Patents [OSTI]

    Evans, Barbara R. (Oak Ridge, TN); O'Neill, Hugh M. (Knoxville, TN); Woodward, Jonathan (Ashtead, GB)

    2011-11-22T23:59:59.000Z

    An electrically conductive cellulose composite includes a cellulose matrix and an electrically conductive carbonaceous material incorporated into the cellulose matrix. The electrical conductivity of the cellulose composite is at least 10 .mu.S/cm at 25.degree. C. The composite can be made by incorporating the electrically conductive carbonaceous material into a culture medium with a cellulose-producing organism, such as Gluconoacetobacter hansenii. The composites can be used to form electrodes, such as for use in membrane electrode assemblies for fuel cells.

  2. The Cosmic Organism Theory

    E-Print Network [OSTI]

    Ding-Yu Chung; Volodymyr Krasnoholovets

    2005-12-05T23:59:59.000Z

    We present the cosmic organism theory in which all visible and invisible matter has different cosmic genetic expressions. The cosmic gene includes codes for the object structure and the space structure. The cosmic digital code for the object structure consists of full object (1, 2, and 3 for particle, string, and membrane, respectively) and empty object (0) as anti de Sitter space (AdS). The tessellation lattice of empty objects is tessellattice. The decomposition of a full object in tessellattice results in the AdS/CFT (conformal field theory) duality. The digital code for the object structure accounts for the AdS/CFT duality, the dS/bulk duality, and gravity. The digital code for the space structure consists of 1 and 0 for attachment space and detachment space, respectively. Attachment space attaches to object permanently at zero speed or reversibly at the speed of light. Detachment space detaches from the object irreversibly at the speed of light. The combination of attachment space and detachment space results in miscible space, binary lattice space or binary partition space. Miscible space represents special relativity. Binary lattice space consists of multiple quantized units of attachment space separated from one another by detachment space. Binary lattice space corresponds to the nilpotent universal computational rewrite system (NUCRS) by Diaz and Rowlands. The gauge force fields and wavefunction are in binary lattice space. With tessellattice and binary lattice space, 11D brane is reducing to 4D particle surrounded by gravity and the gauge force fields. The cosmic dimension varies due to different speeds of light in different dimensional space-times and the increase of mass.

  3. Spring 2014 Organization Development & Training

    E-Print Network [OSTI]

    Wu, Shin-Tson

    Spring 2014 Organization Development & Training Catalog University of Central Florida Office of Organization Development & Training 3280 Progress Drive Orlando, FL 32826-2912 (407) 823-0440 February 7, 2014 Volume 2, Number 3 The current Catalog is published at http://www.hr.ucf.edu/web/training

  4. 4, 719745, 2007 Fluvial organic

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    changes and targets for carbon sequestration set by the Kyoto Protocol. In the UK the largest componentHESSD 4, 719745, 2007 Fluvial organic carbon flux from an eroding peatland R. R. Pawson et al System Sciences Fluvial organic carbon flux from an eroding peatland catchment, southern Pennines, UK R

  5. Seebeck coefficient in organic semiconductors

    E-Print Network [OSTI]

    Venkateshvaran, Deepak

    2014-07-01T23:59:59.000Z

    of this PhD thesis lie in building cost-effective and environmentally friendly waste-heat to useful energy converters based on organic polymers. The efficiency of heat to energy conversion by organic polymers tends to be higher than that for conventional...

  6. Characterizing the formation of secondary organic aerosols

    SciTech Connect (OSTI)

    Lunden, Melissa; Black, Douglas; Brown, Nancy

    2004-02-01T23:59:59.000Z

    Organic aerosol is an important fraction of the fine particulate matter present in the atmosphere. This organic aerosol comes from a variety of sources; primary organic aerosol emitted directly from combustion process, and secondary aerosol formed in the atmosphere from condensable vapors. This secondary organic aerosol (SOA) can result from both anthropogenic and biogenic sources. In rural areas of the United States, organic aerosols can be a significant part of the aerosol load in the atmosphere. However, the extent to which gas-phase biogenic emissions contribute to this organic load is poorly understood. Such an understanding is crucial to properly apportion the effect of anthropogenic emissions in these rural areas that are sometimes dominated by biogenic sources. To help gain insight on the effect of biogenic emissions on particle concentrations in rural areas, we have been conducting a field measurement program at the University of California Blodgett Forest Research Facility. The field location includes has been used to acquire an extensive suite of measurements resulting in a rich data set, containing a combination of aerosol, organic, and nitrogenous species concentration and meteorological data with a long time record. The field location was established in 1997 by Allen Goldstein, a professor in the Department of Environmental Science, Policy and Management at the University of California at Berkeley to study interactions between the biosphere and the atmosphere. The Goldstein group focuses on measurements of concentrations and whole ecosystem biosphere-atmosphere fluxes for volatile organic compounds (VOC's), oxygenated volatile organic compounds (OVOC's), ozone, carbon dioxide, water vapor, and energy. Another important collaborator at the Blodgett field location is Ronald Cohen, a professor in the Chemistry Department at the University of California at Berkeley. At the Blodgett field location, his group his group performs measurements of the concentrations of important gas phase nitrogen compounds. Experiments have been ongoing at the Blodgett field site since the fall of 2000, and have included portions of the summer and fall of 2001, 2002, and 2003. Analysis of both the gas and particle phase data from the year 2000 show that the particle loading at the site correlates with both biogenic precursors emitted in the forest and anthropogenic precursors advected to the site from Sacramento and the Central Valley of California. Thus the particles at the site are affected by biogenic processing of anthropogenic emissions. Size distribution measurements show that the aerosol at the site has a geometric median diameter of approximately 100 nm. On many days, in the early afternoon, growth of nuclei mode particles (<20 nm) is also observed. These growth events tend to occur on days with lower average temperatures, but are observed throughout the summer. Analysis of the size resolved data for these growth events, combined with typical measured terpene emissions, show that the particle mass measured in these nuclei mode particles could come from oxidation products of biogenic emissions, and can serve as a significant route for SOA partitioning into the particle phase. During periods of each year, the effect of emissions for forest fires can be detected at the Blodgett field location. During the summer of 2002 emissions from the Biscuit fire, a large fire located in Southwest Oregon, was detected in the aerosol data. The results show that increases in particle scattering can be directly related to increased black carbon concentration and an appearance of a larger mode in the aerosol size distribution. These results show that emissions from fires can have significant impact on visibility over large distances. The results also reinforce the view that forest fires can be a significant source of black carbon in the atmosphere, which has important climate and visibility. Continuing work with the 2002 data set, particularly the combination of the aerosol and gas phase data, will continue to provide important information o

  7. Purification Or Organic Acids Using Anion Exchange Chromatography.

    DOE Patents [OSTI]

    Ponnampalam; Elankovan (Okemos, MI)

    2001-09-04T23:59:59.000Z

    Disclosed is a cost-effective method for purifying and acidifying carboxylic acids, including organic acids and amino acids. The method involves removing impurities by allowing the anionic form of the carboxylic acid to bind to an anion exchange column and washing the column. The carboxylic anion is displaced as carboxylic acid by washing the resin with a strong inorganic anion. This method is effective in removing organic carboxylic acids and amino acids from a variety of industrial sources, including fermentation broths, hydrolysates, and waste streams.

  8. United States Atomic Energy Commission formed

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    weapons problem, the United States worked to establish its own formal organization. The transition from military civilian control of nuclear energy was defined in the Atomic...

  9. APPLICATION FORM Short term course on

    E-Print Network [OSTI]

    Srivastava, Kumar Vaibhav

    Address: Prof. Tapan K. Sengupta High Performance Computing Lab Department of Aerospace Venue : IIT Kanpur, Kanpur Organized by: High Performance Computing Lab, Dept. of Aerospace Engineering

  10. Charge Transport through Organized Organic Assemblies in Confined Geometries

    E-Print Network [OSTI]

    Schuckman, Amanda Eileen

    2012-07-16T23:59:59.000Z

    of Advisory Committee: Dr. James D. Batteas Organic molecules such as porphyrins and alkanethiols are currently being investigated for applications such as sensors, light-emitting diodes and single electron transistors. Porphyrins are stable, highly..., molecules have shown their potential for applications such as information storage, charge separation, single electron transistors, current routers and gates and continue to be designed for use in solar cells, organic light-emitting diodes, sensors...

  11. Clean process to destroy arsenic-containing organic compounds with recovery of arsenic

    DOE Patents [OSTI]

    Upadhye, R.S.; Wang, F.T.

    1996-08-13T23:59:59.000Z

    A reduction method is provided for the treatment of arsenic-containing organic compounds with simultaneous recovery of pure arsenic. Arsenic-containing organic compounds include pesticides, herbicides, and chemical warfare agents such as Lewisite. The arsenic-containing compound is decomposed using a reducing agent. Arsine gas may be formed directly by using a hydrogen-rich reducing agent, or a metal arsenide may be formed using a pure metal reducing agent. In the latter case, the arsenide is reacted with an acid to form arsine gas. In either case, the arsine gas is then reduced to elemental arsenic. 1 fig.

  12. Stability Index of Interaction forms Joseph Abdou

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Stability Index of Interaction forms Joseph Abdou December 15, 2008 Abstract An interaction form, 106-112 boulevard de l'H^opital 75647 Paris Cedex 13 - France; email: abdou@univ-paris1.fr 1 halshs

  13. Thesis / Dissertation Defense Announcement and Scheduling Form

    E-Print Network [OSTI]

    Hutcheon, James M.

    Thesis / Dissertation Defense Announcement and Scheduling Form Completed form must be received of the following: Thesis Defense Dissertation Defense Public Seminar Only Thesis/Dissertation Associate Dean Only Thesis/Dissertation/Seminar location and time listed above is: Confirmed

  14. Radiological Research Accelerator Facility Service Request Form

    E-Print Network [OSTI]

    Radiological Research Accelerator Facility Service Request Form National Institute of Biomedical Imaging and Bioengineering Radiological Research Accelerator Facility Service request form Estimate when(s) to control for this experiment (if more than one, please prioritize): Radiological Research Accelerator

  15. FACULTY EARLY RETIREMENT PROGRAM Request Form

    E-Print Network [OSTI]

    de Lijser, Peter

    FACULTY EARLY RETIREMENT PROGRAM Request Form INSTRUCTIONS: This form is to be used by faculty to request participation in the Faculty Early Retirement Program (FERP) or to request a change in FERP status

  16. FORMS AND INSTRUCTIONS FOR SUBMITTING ELECTRIC

    E-Print Network [OSTI]

    for Electric Transmission Forms....................................................... 5 General InstructionsCALIFORNIA ENERGY COMMISSION FORMS AND INSTRUCTIONS FOR SUBMITTING ELECTRIC TRANSMISSION Integrated Energy Policy Report and the 2007 Strategic Transmission Investment Plan. Keywords Electric

  17. Musical form in non-narrative video

    E-Print Network [OSTI]

    Sebring, Ellen Irene

    1986-01-01T23:59:59.000Z

    "Musical Form in Non- Narrative Video" explores musical structure as a model for visual form over time, specifically in the creation of artistic video. Video is a medium in which sound and image coexist at the source as ...

  18. Performance of Polymer Coatings Under Forming Conditions

    E-Print Network [OSTI]

    Purohit, Zalak

    2012-02-14T23:59:59.000Z

    during forming and detail study of the surface conditions is required. In the present study, influence of forming parameters such as die radius, lubrication and specimen material are investigated. The influence of these parameters on friction, surface...

  19. Experiential Component Approval Form Concentration in Nanotechnology

    E-Print Network [OSTI]

    Goldberg, Bennett

    Experiential Component Approval Form Concentration in Nanotechnology Return completed form to ENG Plan to complete the experiential component as a requirement for the concentration in Nanotechnology to complete the experiential component for the Nanotechnology Concentration by: Research Experience in Lab

  20. MoIAC Pre-Audit Form Ways to submit this form

    E-Print Network [OSTI]

    Noble, James S.

    information: #12;MoIAC Pre-Audit Form Major Energy Consuming Equipment: Please provide informationMoIAC Pre-Audit Form Ways to submit this form: 1. Fill up the form and fax it to 573-882-2693 Attn: Dr. Bin Wu 2. Print and return this form by mail to: Dr. Bin Wu University of Missouri

  1. Data Form Number and Name Responsible Office(s) CIHE Data Form Gen

    E-Print Network [OSTI]

    Snider, Barry B.

    N E A S C D A T A F O R M S #12;Data Form Number and Name Responsible Office(s) CIHE Data Form Gen: General Information Form President's Office CIHE Data Form 1: Statement of Financial Position Executive Vice President CIHE Data Form 2-1: Statement of Unrestricted Revenues and Expenses Executive Vice

  2. Organic Molecule Functionalized Zn3P2 Nanowire Inorganic-Organic...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Molecule Functionalized Zn3P2 Nanowire Inorganic-Organic Hybrid Thermoelectrics Organic Molecule Functionalized Zn3P2 Nanowire Inorganic-Organic Hybrid Thermoelectrics Demonstrates...

  3. Precipitate hydrolysis process for the removal of organic compounds from nuclear waste slurries

    DOE Patents [OSTI]

    Doherty, J.P.; Marek, J.C.

    1987-02-25T23:59:59.000Z

    A process for removing organic compounds from a nuclear waste slurry comprising reacting a mixture of radioactive waste precipitate slurry and an acid in the presence of a catalytically effective amount of a copper(II) catalyst whereby the organic compounds in the precipitate slurry are hydrolyzed to form volatile organic compounds which are separated from the reacting mixture. The resulting waste slurry, containing less than 10 percent of the original organic compounds, is subsequently blended with high level radioactive sludge land transferred to a vitrification facility for processing into borosilicate glass for long-term storage. 2 figs., 3 tabs.

  4. Ocular Dominance and Activation Dynamics in a Unified Self-Organizing Model . . .

    E-Print Network [OSTI]

    1994-01-01T23:59:59.000Z

    A neural network model for the self-organization of lateral connections and ocular dominance columns from uncorrelated binocular input is pre- sented. The self-organizing process results in a network where (1) afferent weights of each neuron organize into smooth hill-shaped receptive fields primarily on one of the retinas, (2) neurons with common eye preference form connected, intertwined patches, and (3) lateral connections primarily link regions of the same eye preference. Similar self-organization of cortical structures has been observed experimentally in strabismic kittens. The lateral

  5. Precipitate hydrolysis process for the removal of organic compounds from nuclear waste slurries

    DOE Patents [OSTI]

    Doherty, Joseph P. (Elkton, MD); Marek, James C. (Augusta, GA)

    1989-01-01T23:59:59.000Z

    A process for removing organic compounds from a nuclear waste slurry comprising reacting a mixture of radioactive waste precipitate slurry and an acid in the presence of a catalytically effective amount of a copper (II) catalyst whereby the organic compounds in the precipitate slurry are hydrolyzed to form volatile organic compounds which are separated from the reacting mixture. The resulting waste slurry, containing less than 10 percent of the orginal organic compounds, is subsequently blended with high level radioactive sludge and transferred to a virtrification facility for processing into borosilicate glass for long-term storage.

  6. CPR/AED Training Payment Form

    E-Print Network [OSTI]

    Yang, Zong-Liang

    CPR/AED Training Payment Form This form must be completed and submitted along with payment in order to participate in TxClass PN 900 CPR/AED Training. Cost to participate is $30. Payment may be in the form of IDT account or check payable to UT Austin. Upon receipt of payment and completion of training class

  7. CLINICAL SITE INFORMATION FORM (CSIF) developed by

    E-Print Network [OSTI]

    Sheridan, Jennifer

    CLINICAL SITE INFORMATION FORM (CSIF) developed by APTA Department of Physical Therapy Education Why have a consistent Clinical Site Information Form? The primary purpose of this form is for Physical Therapist (PT) and Physical Therapist Assistant (PTA) academic programs to collect information from clinical

  8. Computing Valuation Popov Forms Mark Giesbrecht1

    E-Print Network [OSTI]

    Labahn, George

    Computing Valuation Popov Forms Mark Giesbrecht1 , George Labahn1 , and Yang Zhang2 1 School. Popov forms and weak Popov forms of matrices over non- commutative valuation domains are defined rings. In the computer alge- bra area, Abramov and Bronstein [1] gave a method to calculate the ranks

  9. Automated Fuel Dispensing System Form Instructions

    E-Print Network [OSTI]

    Fernandez, Eduardo

    Automated Fuel Dispensing System Form Instructions If additional forms are necessary to provide(s) are hired and will be obtaining fuel, an Add Driver Form MUST be submitted for entry into the web database and/or diesel fuel to operate. Note: When a new vehicle, golf cart (gasoline), etc., is placed

  10. THESIS-DISSERTATION Approval Form Instructions

    E-Print Network [OSTI]

    Gelfond, Michael

    THESIS-DISSERTATION Approval Form Instructions: This form is to be signed by all members of the student's dissertation or thesis committee. The student must make arrangements to obtain the signatures that the committee member has read the dissertation or thesis and agrees that the content and form of the document

  11. EPOK Centre for Organic Food and Farming

    E-Print Network [OSTI]

    EPOK Centre for Organic Food and Farming Research on Organic Animal Husbandry in Sweden on organic production is coordinated by EPOK (Centre for Organic Food and Farming) at the Swedish University that have the potential to mitigate environmental effects. Publisher: EPOK Centre for organic food

  12. Reducing recombination in organic photovoltaics

    E-Print Network [OSTI]

    Sussman, Jason M. (Jason Michael)

    2011-01-01T23:59:59.000Z

    In this thesis, I consider two methods to improve organic photovoltaic efficiency: energy level cascades and promotion of triplet state excitons. The former relies on a thin layer of material placed between the active ...

  13. DOE Organization Chart- February 2015

    Broader source: Energy.gov [DOE]

    The DOE Organization Chart is a diagram of the U.S. Department of Energys structure along with the relationships and relative ranks of its parts and positions/jobs.

  14. Engineering Organization Chart Assistant Dean

    E-Print Network [OSTI]

    Delene, David J.

    Engineering Organization Chart Fall `12 Assistant Dean Outreach & Recruiting Matthew Cavalli and Geological Engineering Joseph Hartman Chair, Petroleum Engineering Steve Benson Chair, Electrical Engineering Forrest Ames (interim) Chair, Mechanical Engineering Matthew Cavalli Chair, Chemical Engineering Mike Mann

  15. Emergent Leadership Structures in Organizations

    E-Print Network [OSTI]

    Slaughter, Andrew

    2010-01-14T23:59:59.000Z

    A social network approach was used to investigate the structural features of various emergent leadership systems in a large financial organization (n = 137), including transactional and transformational-style leadership relations. Results indicate...

  16. Three Essays on Industrial Organization

    E-Print Network [OSTI]

    Lee, Yang Seung

    2008-12-18T23:59:59.000Z

    The dissertation discusses issues in the field of industrial organization. When the government provides better infrastructure to competing firms for innovation, private firms' R&D expenditures are affected. When the ...

  17. Management Principles for Nonproliferation Organizations

    SciTech Connect (OSTI)

    Frazar, Sarah L.; Hund, Gretchen

    2012-03-06T23:59:59.000Z

    This paper identifies business models and six management principles that can be applied by a nonproliferation organization to maximize the value and effectiveness of its products. The organizations responsible for reducing the nuclear proliferation threat have experienced a substantial growth in responsibility and visibility since the September 11 attacks. Since then, the international community has witnessed revelations of clandestine nuclear facilities, nuclear black markets, periodic nuclear tests, and a resurgence of interest by countries worldwide in developing nuclear capabilities. The security environment will likely continue to evolve in unexpected ways since most of the proliferation threats with which the world will be forced to contend remain unforeseen. To better prepare for and respond to this evolving security environment, many nonproliferation organizations are interested in finding new or better ways to increase the effectiveness and efficiency of their operations. Of course, all organizations, whether they are market driven or non-profit, must operate effectively and efficiently if they are to succeed. Indeed, as this study demonstrates, many of the management principles that this study recommends can help all organizations succeed. However, this study pays particular attention to nonproliferation organizations because of the mission they are responsible for fulfilling. Nonproliferation organizations, including nonproliferation programs that operate within a larger national security organization, are responsible for reducing the threat of nuclear, chemical and biological weapons. These organizations have an enduring mandate from the public and the international community not to fail in the completion of their mission for failure could have detrimental impacts on international security, public health and the environment. Moreover, the public expects nonproliferation organizations and programs to fulfill their mission, even when resources are limited. They are expected to anticipate and react quickly to prevent a potential threat while staying accountable to their public stakeholders, many of whom remain unaware of the very threats the organization is trying to address. When budgets are flush, it is easy to believe that money will solve all problems; but during times of economic hardship, managers must rely on creative and cost-effective management approaches to implement their missions. Fortunately, managers of nonproliferation organizations can draw on a wealth of research on organizational design and culture to help them identify the management strategies most appropriate for them. Such research can help nonproliferation managers think about their own organizational structures and cultures and adapt accepted management principles to their unique organizational mission. This analytical process is not straight forward, as some managers may find themselves taking risks that others might not take, such as making ostensibly risky investments for the common good, or supporting creative thinking to help mission accomplishment. Some management principles that are relatively straightforward for other organizations may be difficult to envision and implement in a nonproliferation organization. Therefore, the goal of this study is to help nonproliferation managers identify management principles that can be implemented in a nonproliferation organization and, in the process, help maximize the value of the organization's products and effectiveness of its mission.

  18. DOE Organization Chart- May 2015

    Broader source: Energy.gov [DOE]

    The DOE Organization Chart is a diagram of the U.S. Department of Energys structure along with the relationships and relative ranks of its parts and positions/jobs.

  19. Inorganic-Organic Hybrid Thermoelectrics

    Broader source: Energy.gov [DOE]

    Large-scale synthesis of inorganic and organic nanomaterials (single-crystalline nanowires and functionalized conducting polymer thin films) together with strategies for large-scale assembly are discussed

  20. Electrodes mitigating effects of defects in organic electronic devices

    DOE Patents [OSTI]

    Heller, Christian Maria Anton (Albany, NY)

    2008-05-06T23:59:59.000Z

    A compound electrode for organic electronic devices comprises a thin first layer of a first electrically conducting material and a second electrically conducting material disposed on the first layer. In one embodiment, the second electrically conducting material is formed into a plurality of elongated members. In another embodiment, the second material is formed into a second layer. The elongated members or the second layer has a thickness greater than that of the first layer. The second layer is separated from the first layer by a conducting material having conductivity less than at least the material of the first layer. The compound electrode is capable of mitigating adverse effects of defects, such as short circuits, in the construction of the organic electronic devices, and can be included in light-emitting or photovoltaic devices.

  1. Ambient-pressure organic superconductor

    DOE Patents [OSTI]

    Williams, Jack M. (Downers Grove, IL); Wang, Hsien-Hau (Willowbrook, IL); Beno, Mark A. (Woodridge, IL)

    1986-01-01T23:59:59.000Z

    A new class of organic superconductors having the formula (ET).sub.2 MX.sub.2 wherein ET represents bis(ethylenedithio)-tetrathiafulvalene, M is a metal such as Au, Ag, In, Tl, Rb, Pd and the like and X is a halide. The superconductor (ET).sub.2 AuI.sub.2 exhibits a transition temperature of 5 K which is high for organic superconductors.

  2. Construction Sets and Unmarked Forms: A Case Study for Hungarian Verbal Agreement

    E-Print Network [OSTI]

    Steels, Luc

    Construction Sets and Unmarked Forms: A Case Study for Hungarian Verbal Agreement Katrien Beuls Abstract Construction application can be made more efficient by organizing con- structions into sets and by imposing an ordering on when a construction set should be considered. This technique gives us moreover

  3. Power, Media & Montesquieu. New forms of public power and the balance of power

    E-Print Network [OSTI]

    van den Brink, Jeroen

    SUMMARY Power, Media & Montesquieu. New forms of public power and the balance of power are organized it is crucial to restrain the power that the state exerts on its citizens. The state has three functions, commonly known as powers: the legislative, executive and judicial powers. This three

  4. Copper and zinc balance in exercising horses fed two forms of mineral supplements

    E-Print Network [OSTI]

    Wagner, Elizabeth Lynn

    2009-05-15T23:59:59.000Z

    . In periods 4 and 7, horses were fed diets designed to provide 90% of NRC (1989) values for Cu and Zn supplied in the sulfate or organic-chelate forms. Horses were subjected to a standard exercise test on d 23 of periods 4 and 7 followed by a 4-d total fecal...

  5. Project Information Form Project Title Impact of Legislative Mandates on Transportation Workforce Capacity

    E-Print Network [OSTI]

    California at Davis, University of

    agencies are heavily involved in not only planning and forecasting, and budgeting and financing, but alsoProject Information Form Project Title Impact of Legislative Mandates on Transportation Workforce or organization) DOT $95,000 Total Project Cost $95,000 Agency ID or Contract Number DTRT13-G-UTC29 Start and End

  6. Sulfurization of a carbon surface for vapor phase mercury removal II: Sulfur forms and mercury uptake

    E-Print Network [OSTI]

    Borguet, Eric

    promote the formation of organic sulfur and the presence of H2S during the cooling process increased in the presence of H2S was very effective towards Hg uptake in nitrogen. Corre- lation of mercury uptake capacitySulfurization of a carbon surface for vapor phase mercury removal II: Sulfur forms and mercury

  7. Free Energy Analysis of the Conformational Preferences of A and B Forms of DNA in Solution

    E-Print Network [OSTI]

    Jayaram, Bhyravabotla

    Free Energy Analysis of the Conformational Preferences of A and B Forms of DNA in Solution B in conformational preferences experimentally are accounted for by the calculations. Analysis of the results indicates the free energy associated with the explicit organization of the mobile counterions around

  8. PeopleSoft Projectp j Postdoc Web FormsPostdoc Web Forms

    E-Print Network [OSTI]

    Kay, Mark A.

    PeopleSoft Projectp j Postdoc Web FormsPostdoc Web Forms What to Expect and How to Prepare. Web Forms and interfaces to support all Postdoc administrative processes and system

  9. Application Form for Replacement Diploma/Program Certificate (Form must be notarized)

    E-Print Network [OSTI]

    Application Form for Replacement Diploma/Program Certificate (Form must be notarized) Complete to Princeton University as follows: Replacement Diploma - $75 Replacement Program Certificate - $30 Please

  10. Generation of Organic Radicals During Photocatalytic Reactions...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Generation of Organic Radicals During Photocatalytic Reactions on TiO2. Generation of Organic Radicals During Photocatalytic Reactions on TiO2. Abstract: Using a variety of organic...

  11. Patterning Organic Electronics Based on Nanoimprint Lithography

    E-Print Network [OSTI]

    Lo, Yi-Chen

    2014-04-25T23:59:59.000Z

    with organic semiconductors. This technique was then used to fabricate passive-matrix organic light-emitting diode (PMOLED) arrays for flat-panel display applications. Fabrication of a self-aligned bottom gate electrode for organic metal semiconductor field...

  12. Organic Photovoltaics Experiments Showcase 'Superfacility' Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Organic Photovoltaics Experiments Showcase 'Superfacility' Concept Organic Photovoltaics Experiments Showcase 'Superfacility' Concept Collaboration Key to Enabling On-The-Fly HPC...

  13. Molecular Characterization of Nitrogen Containing Organic Compounds...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nitrogen Containing Organic Compounds in Biomass Burning Aerosols Using High Resolution Mass Molecular Characterization of Nitrogen Containing Organic Compounds in Biomass Burning...

  14. LANL named 2010 top corporate volunteer organization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2010 top corporate volunteer organization LANL named 2010 top corporate volunteer organization The Laboratory ranked ahead of dozens of other qualifying companies with 10,000 or...

  15. Tanzania Traditional Energy Development and Environment Organization...

    Open Energy Info (EERE)

    Traditional Energy Development and Environment Organization (TaTEDO) Jump to: navigation, search Name: Tanzania Traditional Energy Development and Environment Organization (TaTEDO)...

  16. Synthetic Control of Organic Semiconductor Excited States

    E-Print Network [OSTI]

    Clem, Tabitha Ann

    2010-01-01T23:59:59.000Z

    Molecules for Organic Photovoltaics Abstract The synthesis,with a particular focus on photovoltaics. The first chapterfor Organic Photovoltaics Chapter 3: Cyclometalated Platinum

  17. Controlled growth of larger heterojunction interface area for organic photosensitive devices

    DOE Patents [OSTI]

    Yang, Fan (Somerset, NJ); Forrest, Stephen R. (Ann Arbor, MI)

    2009-12-29T23:59:59.000Z

    An optoelectronic device and a method of fabricating a photosensitive optoelectronic device includes depositing a first organic semiconductor material on a first electrode to form a continuous first layer having protrusions, a side of the first layer opposite the first electrode having a surface area at least three times greater than an underlying lateral cross-sectional area; depositing a second organic semiconductor material directly on the first layer to form a discontinuous second layer, portions of the first layer remaining exposed; depositing a third organic semiconductor material directly on the second layer to form a discontinuous third layer, portions of at least the second layer remaining exposed; depositing a fourth organic semiconductor material on the third layer to form a continuous fourth layer, filling any exposed gaps and recesses in the first, second, and third layers; and depositing a second electrode on the fourth layer, wherein at least one of the first electrode and the second electrode is transparent, and the first and third organic semiconductor materials are both of a donor-type or an acceptor-type relative to second and fourth organic semiconductor materials, which are of the other material type.

  18. Dry Lithography of Large-Area, Thin-Film Organic Semiconductors Using Frozen CO[subscript 2] Resists

    E-Print Network [OSTI]

    Mendoza, Hiroshi A.

    To address the incompatibility of organic semiconductors with traditional photolithography, an inert, frozen CO[subscript 2] resist is demonstrated that forms an in situ shadow mask. Contact with a room-temperature ...

  19. Patterns in Teleost Photoreceptor Organization: A Characterization of Basal Body Positioning in Zebrafish Photoreceptors and Variations in Swordtail Photoreceptor Mosaics

    E-Print Network [OSTI]

    Ramsey, Michelle

    2014-04-17T23:59:59.000Z

    not been characterized. Because zebrafish photoreceptors form an organized, well-characterized mosaic, they are an ideal system to address photoreceptor basal body positioning. Second, swordtail fish are frequently studied to investigate visually...

  20. Assessing the Influence of Secondary Organic versus Primary Carbonaceous Aerosols on Long-Range Atmospheric Polycyclic Aromatic Hydrocarbon Transport

    E-Print Network [OSTI]

    Pierce, J. R.

    We use the chemical transport model GEOS-Chem to evaluate the hypothesis that atmospheric polycyclic aromatic hydrocarbons (PAHs) are trapped in secondary organic aerosol (SOA) as it forms. We test the ability of three ...

  1. New Species of Cyanobacteria Forms Intracellular Carbonates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    years by assimilating CO2 into organic compounds and triggering calcium carbonate (CaCO3) precipitation. Despite the importance of this cyanobacteria-mediated CaCO3...

  2. Simplex Method in Matrix Form Sensitivity Analysis in Matrix Form Math 364: Principles of Optimization, Lectures

    E-Print Network [OSTI]

    Li, Haijun

    Simplex Method in Matrix Form Sensitivity Analysis in Matrix Form Math 364: Principles Spring 2012 Haijun Li Math 364: Principles of Optimization, Lectures 14-15 Spring 2012 1 / 24 #12;Simplex, Lectures 14-15 Spring 2012 2 / 24 #12;Simplex Method in Matrix Form Sensitivity Analysis in Matrix Form

  3. REMOTE HIRE NOTARY NOTICE FORM INSTRUCTION SHEET Instructions for the I-9 form

    E-Print Network [OSTI]

    Yamamoto, Keith

    REMOTE HIRE NOTARY NOTICE FORM INSTRUCTION SHEET Instructions for the I-9 form We are asking you sheet, and the Remote Hire Notary Notice Form. Verify that the employee has completed section 1 of the I has been provided to you on the Remote Hire Notary Notice Form. Please complete the certification

  4. INCOMING DOCUMENT CONTROL FORM DOCUMENT DESCRIPTION ORGANIZATIO

    Office of Legacy Management (LM)

    INCOMING DOCUMENT CONTROL FORM DOCUMENT DESCRIPTION ORGANIZATIO )ATE COMPLETED: ACTION NUMBER: I I I DOCUMENT CONTROL DATE INITIALS DATA BASE: ACTION LOG: FILED: To : Doug...

  5. WYSS TECHNOLOGY DEVELOPMENT FELLOWSHIP NOMINATION FORM

    E-Print Network [OSTI]

    WYSS TECHNOLOGY DEVELOPMENT FELLOWSHIP NOMINATION FORM 1. Biographical Sketch _____________________________________________ ________________________________________ Wyss Enabling Technology Platform Focus research plans relative to Wyss Enabling Technology Platform. 3. Enclose supporting letter from nominator

  6. International Development Studies Additional Requirement Form

    E-Print Network [OSTI]

    International Development Studies Additional Requirement Form The IDS additional program email. You may find additional scheduled possibilities by looking at the International Programs

  7. Secondary Waste Forms and Technetium Management

    Office of Environmental Management (EM)

    Secondary Waste Forms and Technetium Management Joseph H. Westsik, Jr. Pacific Northwest National Laboratory EM HLW Corporate Board Meeting November 18, 2010 What are Secondary...

  8. Superior Energy Performance Enrollment and Application Forms...

    Office of Environmental Management (EM)

    Forms for Superior Energy Performance (SEP(tm)) Industrial Participants. SEP, built on ISO 50001 framework, provides a globally recognized system that U.S. industrial facilities...

  9. The Development of Semiconducting Materials for Organic Photovoltaics

    E-Print Network [OSTI]

    Douglas, Jessica D.

    2013-01-01T23:59:59.000Z

    of Organic Photovoltaic Device Efficiency..4of Organic Photovoltaic Device Efficiency The efficiency atpower conversion efficiency of organic photovoltaic devices.

  10. EPOK Centre for Organic Food and Farming

    E-Print Network [OSTI]

    EPOK Centre for Organic Food and Farming EPOK Centre for Organic Food and Farming Compiling Sciences works to disseminate knowledge and coordinate research and education in the areas of organic food in the organic food chain. Range of activities Living website: www.slu.se/epok Expert responses on the internet

  11. --Discussion Paper--ORGANIC AND CONVENTIONAL POTATOES

    E-Print Network [OSTI]

    Radeloff, Volker C.

    1 --Discussion Paper-- ORGANIC AND CONVENTIONAL POTATOES: PRICING AND DEMAND, 2000-2005 I. ORGANICS). Among fresh vegetables, the top organic purchases are lettuce, tomatoes, broccoli, onions, and potatoes. Among selected vegetables, a recent US study found the largest organic premium was for potatoes (Zhang

  12. 1, 122, 2001 Organic TDMA

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    ACPD 1, 1­22, 2001 Organic TDMA Joutsensaari et al. Title Page Abstract Introduction Conclusions References Tables Figures Back Close Print Version Interactive Discussion c EGS 2001 Atmos. Chem. Phys. Discuss., 1, 1­22, 2001 www.atmos-chem-phys.org/acpd/1/1/ c European Geophysical Society 2001 Atmospheric

  13. ORGANIZING INFORMATION FOR ECOLOGICAL SITES

    E-Print Network [OSTI]

    in a way that preserves the greatest possible knowledge base, while making the most efficient and effectiveORGANIZING INFORMATION FOR ECOLOGICAL SITES Society for Range Management Annual Meeting Ecological effectively for planning, restoration, and management. Arranging the various elements within the ecosystem

  14. Insect Controls for Organic Gardeners.

    E-Print Network [OSTI]

    Lewis, Kenneth R.; Turney, H.A.

    1979-01-01T23:59:59.000Z

    ) ............................................ 7 Praying Mantid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 7 Lady Beetles ........................................................... 7 CHEMICAL CONTROL METHODS... plant varieties which exhibit less insect damage when compared to other varieties under similar grow ing conditions. Some varieties may be less tasty to Figure 1. Managing and protecting the organic garden can be an enjoyable family project. 3...

  15. The Anaerobic Digestion of Organic

    E-Print Network [OSTI]

    Iglesia, Enrique

    Separation in California 2.3. Biochemical Process 2.4. End-use 2.4.1. Biogas 2.4.1. Biomethane 2.5. Current and commercialization. Anaerobic digestion (AD) of organic municipal solid waste and subsequent biogas and methane as biomethane production; by emphasizing these benefits and implementing certain policies, expanding

  16. NSTX Organization 2009 Heating Systems

    E-Print Network [OSTI]

    Princeton Plasma Physics Laboratory

    Erik Perry Central I&C Paul Sichta Power Systems John Lacenere Auxiliary Systems Bill Blanchard Physics Analysis and Simulation Stan Kaye Advanced Scenarios and Control David Gates, Jon Menard Modeling1 NSTX Organization 2009 Heating Systems Tim Stevenson Device Operation Al von Halle Construction

  17. Deformation and Forming of Joined Materials

    SciTech Connect (OSTI)

    Carsley, John; Hovanski, Yuri; Clarke, Kester D.; Krajewski, Paul E.

    2014-09-23T23:59:59.000Z

    Introductory article to a set of invited papers from the TMS committee on shaping and forming. This paper introduces a set of papers that were prepared to discussing the deformation and forming of joined materials, and to announce an upcoming symposium at the 2015 MS&T meeting in Columbus Ohio.

  18. Registration Form April 25-29, 2001

    E-Print Network [OSTI]

    Wu, Jianguo "Jingle"

    IALE 2001 Symposium Registration Form April 25-29, 2001 Dr. Laura Musacchio School of Planning://www.west.asu.edu/LEML/iale2001/ Phone: 480.727.7336 Print this form, fill it out, and mail to above address or fax it to 480 Description Price Each Registration Member Pre-Registration (before March 5, 2001) $200.00 Non-Member Pre

  19. Page 1 of 2 Dissertation Milestone Form

    E-Print Network [OSTI]

    Gilchrist, James F.

    Page 1 of 2 Dissertation Milestone Form (effective Fall 2008) Name: Date (when form filled into one chapter Will have an accepted dissertation proposal (chapters 1 and 2 plus Methods chapter) Will complete data collection Will have an accepted final copy of the dissertation #12;

  20. LIS S602 PROPOSAL FORM: Directed Research

    E-Print Network [OSTI]

    Zhou, Yaoqi

    Department of Library and Information Science Return to: LIS Administrative Office, 755 West Michigan Street directing the project and a copy of that detailed proposal attached to this form. The approved form _________________________________ Brief description of project: Circumstances which make this project appropriate: Semester to be enrolled

  1. School of Music Faculty Absence Information Form

    E-Print Network [OSTI]

    School of Music Faculty Absence Information Form Please submit completed form to the Director of the School of Music in compliance with School & University policy on time and attendance tracking. Name these in your place? How does this absence relate to your responsibilities as a faculty member in the School

  2. Master Project Assessment Form Student: ID number

    E-Print Network [OSTI]

    Franssen, Michael

    Master Project Assessment Form Student: ID number: Master Program: Graduation supervisor Graduation presentation Defense Execution of the project Grade Signature of supervisor Date * Hand in at the student administration (MF 3.068) together with an official result form (uitslagbon) #12;"Master Project

  3. Emergency Shower/Eyewash Commissioning Request Form

    E-Print Network [OSTI]

    Pawlowski, Wojtek

    Emergency Shower/Eyewash Commissioning Request Form Emergency Shower/Eyewash Program Form To schedule the commissioning process for any new emergency shower/ eyewashes please complete and submit ************************************************************************************************************* List rooms and unit type. Units that meet commissioning requirements will be labeled with a unique ID

  4. IMPORTED SOIL OR SOIL-FORMING MATERIALS

    E-Print Network [OSTI]

    IMPORTED SOIL OR SOIL-FORMING MATERIALS PLACEMENT BPG NOTE 5 Best Practice Guidance for Land of heavy industry. Soil material initially present on a site may have been removed or stored in bunds the original soil that has been stored or importing a soil from elsewhere or using a soil-forming material

  5. BRYANT UNIVERSITY INTERNATIONAL STUDENT TRANSFER FORM

    E-Print Network [OSTI]

    Blais, Brian

    BRYANT UNIVERSITY INTERNATIONAL STUDENT TRANSFER FORM Bryant University requires this form at __________________________________to provide the information requested below in order to complete my transfer to Bryant University for International Admission Bryant University Office of Admission 1150 Douglas Pike Smithfield, RI 02917 (401) 232

  6. INSTRUCTIONS FOR COMPLETING THE BONUS PAY FORM

    E-Print Network [OSTI]

    Provancher, William

    INSTRUCTIONS FOR COMPLETING THE BONUS PAY FORM Prepared By: Payment: A. Department Name: Enter the employee's Pay Group. E. F. Amount : Enter the gross amount of the Bonus to be paid. G. H. Chartfield on the Bonus Pay form, this is who will be contacted. Omitting this information will cause delays in processing

  7. Methods for forming long subsurface heaters

    DOE Patents [OSTI]

    Kim, Dong Sub

    2013-09-17T23:59:59.000Z

    A method for forming a longitudinal subsurface heater includes longitudinally welding an electrically conductive sheath of an insulated conductor heater along at least one longitudinal strip of metal. The longitudinal strip is formed into a tubular around the insulated conductor heater with the insulated conductor heater welded along the inside surface of the tubular.

  8. TENDER AND ACCEPTANCE FORM STIPULATED PRICE CONTRACT

    E-Print Network [OSTI]

    deYoung, Brad

    TENDER AND ACCEPTANCE FORM FOR STIPULATED PRICE CONTRACT June 2013 #12;Stipulated Price Contract with that of all Subcontractors working on the Project. (See Appendix "D" for sample schedule that must be submitted within 10 days #12;Stipulated Price Contract Tender and Acceptance Form Page 2 of contract award

  9. University of Pittsburgh Vehicle Accident Report Form

    E-Print Network [OSTI]

    Sibille, Etienne

    University of Pittsburgh Vehicle Accident Report Form To be completed by the driver immediately following the accident (if medically able) and return this completed form to Fleet Services, Dept of Parking-624-1817 A. Report Date: ______/______/_______ B: Accident Data Date of accident

  10. Method for destroying hazardous organics and other combustible materials in a subcritical/supercritical reactor

    DOE Patents [OSTI]

    Janikowski, Stuart K. (Idaho Falls, ID)

    2000-01-01T23:59:59.000Z

    A waste destruction method using a reactor vessel to combust and destroy organic and combustible waste, including the steps of introducing a supply of waste into the reactor vessel, introducing a supply of an oxidant into the reactor vessel to mix with the waste forming a waste and oxidant mixture, introducing a supply of water into the reactor vessel to mix with the waste and oxidant mixture forming a waste, water and oxidant mixture, reciprocatingly compressing the waste, water and oxidant mixture forming a compressed mixture, igniting the compressed mixture forming a exhaust gas, and venting the exhaust gas into the surrounding atmosphere.

  11. Organization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > TheNuclear Astrophysics One ofSpeedingthis siteOrg

  12. Organization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeeding access toTest andOptimize carbon

  13. Membrane-Organized Chemical Photoredox Systems

    SciTech Connect (OSTI)

    Hurst, James K.

    2014-09-18T23:59:59.000Z

    This project has three interrelated goals relevant to solar water photolysis, which are to develop: (1) vesicle-organized assemblies for H2 photoproduction that utilize pyrylium and structurally related compounds as combined photosensitizers and cyclic electroneutral transmembrane electron carriers; (2) transmembrane redox systems whose reaction rates can be modulated by light; and (3) homogeneous catalysts for water oxidation. . In area (1), initial efforts to photogenerate H2 from vectorially-organized vesicles containing occluded colloidal Pt and commonly available pyrylium ions as transmembrane redox mediators were unsuccessful. New pyrylium compounds with significantly lower reduction potentials have been synthesized to address this problem, their apparent redox potentials in functioning systems have been now evaluated by using a series of occluded viologens, and H2 photoproduction has been demonstrated in continuous illumination experiments. In area (2), spirooxazine-quinone dyads have been synthesized and their capacity to function as redox mediators across bilayer membranes has been evaluated through continuous photolysis and transient spectrophotometric measurements. Photoisomerization of the spiro moiety to the ring-open mero form caused net quantum yields to decrease significantly, providing a basis for photoregulation of transmembrane redox. Research on water oxidation (area 3) has been directed at understanding mechanisms of catalysis by cis,cis-[(bpy)2Ru(OH2)]2O4+ and related polyimine complexes. Using a variety of physical techniques, we have: (i) identified the redox state of the complex ion that is catalytically active; (ii) shown using 18O isotopic labeling that there are two reaction pathways, both of which involve participation of solvent H2O; and (iii) detected and characterized by EPR and resonance Raman spectroscopies new species which may be key intermediates in the catalytic cycle.

  14. Methods of forming semiconductor devices and devices formed using such methods

    DOE Patents [OSTI]

    Fox, Robert V; Rodriguez, Rene G; Pak, Joshua

    2013-05-21T23:59:59.000Z

    Single source precursors are subjected to carbon dioxide to form particles of material. The carbon dioxide may be in a supercritical state. Single source precursors also may be subjected to supercritical fluids other than supercritical carbon dioxide to form particles of material. The methods may be used to form nanoparticles. In some embodiments, the methods are used to form chalcopyrite materials. Devices such as, for example, semiconductor devices may be fabricated that include such particles. Methods of forming semiconductor devices include subjecting single source precursors to carbon dioxide to form particles of semiconductor material, and establishing electrical contact between the particles and an electrode.

  15. Charge Transport through Organized Organic Assemblies in Confined Geometries

    E-Print Network [OSTI]

    Schuckman, Amanda Eileen

    2012-07-16T23:59:59.000Z

    is the calculated non-space charge limited conductance. This photogated device is an early example of an all- organic molecular electronic. Reproduced from ref. [45] with permission of the copyright holders... for the progression of smaller and faster devices being able to replicate the invaluable techniques to scale down the feature size with little or no modification to their methods. ____________ This dissertation follows the style of the Journal...

  16. Slab edge insulating form system and methods

    DOE Patents [OSTI]

    Lee, Brain E. (Corral de Tierra, CA); Barsun, Stephan K. (Davis, CA); Bourne, Richard C. (Davis, CA); Hoeschele, Marc A. (Davis, CA); Springer, David A. (Winters, CA)

    2009-10-06T23:59:59.000Z

    A method of forming an insulated concrete foundation is provided comprising constructing a foundation frame, the frame comprising an insulating form having an opening, inserting a pocket former into the opening; placing concrete inside the foundation frame; and removing the pocket former after the placed concrete has set, wherein the concrete forms a pocket in the placed concrete that is accessible through the opening. The method may further comprise sealing the opening by placing a sealing plug or sealing material in the opening. A system for forming an insulated concrete foundation is provided comprising a plurality of interconnected insulating forms, the insulating forms having a rigid outer member protecting and encasing an insulating material, and at least one gripping lip extending outwardly from the outer member to provide a pest barrier. At least one insulating form has an opening into which a removable pocket former is inserted. The system may also provide a tension anchor positioned in the pocket former and a tendon connected to the tension anchor.

  17. Organic materials and devices for detecting ionizing radiation

    DOE Patents [OSTI]

    Doty, F. Patrick (Livermore, CA); Chinn, Douglas A. (Livermore, CA)

    2007-03-06T23:59:59.000Z

    A .pi.-conjugated organic material for detecting ionizing radiation, and particularly for detecting low energy fission neutrons. The .pi.-conjugated materials comprise a class of organic materials whose members are intrinsic semiconducting materials. Included in this class are .pi.-conjugated polymers, polyaromatic hydrocarbon molecules, and quinolates. Because of their high resistivities (.gtoreq.10.sup.9 ohmcm), these .pi.-conjugated organic materials exhibit very low leakage currents. A device for detecting and measuring ionizing radiation can be made by applying an electric field to a layer of the .pi.-conjugated polymer material to measure electron/hole pair formation. A layer of the .pi.-conjugated polymer material can be made by conventional polymer fabrication methods and can be cast into sheets capable of covering large areas. These sheets of polymer radiation detector material can be deposited between flexible electrodes and rolled up to form a radiation detector occupying a small volume but having a large surface area. The semiconducting polymer material can be easily fabricated in layers about 10 .mu.m to 100 .mu.m thick. These thin polymer layers and their associated electrodes can be stacked to form unique multi-layer detector arrangements that occupy small volume.

  18. Organic Chemistry 51B -Winter 2013 Organic Chemistry Peer Tutoring Program Chemistry 51B Reactions List

    E-Print Network [OSTI]

    Rose, Michael R.

    Organic Chemistry 51B - Winter 2013 Organic Chemistry Peer Tutoring Program Chemistry 51B Reactions(s). Chapter 7: Nucleophilic Substitution + + NaOH CH3O- #12;Organic Chemistry 51B - Winter 2013 Organic Chemistry Peer Tutoring Program Chapter 8: Elimination Reactions #12;Organic Chemistry 51B - Winter 2013

  19. Forms | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental Assessments (EA)Budget(DANCE) TargetForms & DocumentsFormsForms

  20. SENIOR PROJECT PROPOSAL FORM Attach this completed form to your Honors Senior Proposal

    E-Print Network [OSTI]

    Huang, Haiying

    SENIOR PROJECT PROPOSAL FORM Attach this completed form to your Honors Senior Proposal I. PERSONAL#:________________________________ Anticipated Graduation Date: _____________________________ Date Submitted: ___________________________ Major: __________________________________ II. PROJECT INFORMATION Type of Project: Consult the departmental options informational sheet

  1. SENIOR PROJECT APPROVAL FORM Submit this completed form with your Honors Senior Project

    E-Print Network [OSTI]

    Huang, Haiying

    SENIOR PROJECT APPROVAL FORM Submit this completed form with your Honors Senior Project I. PERSONAL#: ______________________________________ Anticipated Graduation Date: ______________________ Date Submitted: _________________________________ Mav: _______________________________________ Classification: Junior Senior II. PROJECT INFORMATION Type of Project: Thesis Group Project Internship Creative

  2. ETSU Appworx Job Request Form 1.2 May 14, 2008 Appworx Job Request Form

    E-Print Network [OSTI]

    Karsai, Istvan

    ETSU Appworx Job Request Form 1.2 May 14, 2008 Appworx Job Request Form Office of Information Technology 424 Roy S. Nicks Hall, Box 70728 Johnson City, Tennessee 37614 (423) 439-4648 oithelp@etsu

  3. Test Scanning Request Form Please complete one form for each test and key.

    E-Print Network [OSTI]

    Pantaleone, Jim

    Test Scanning Request Form Please complete one form for each test and key. This Section to be completed by the Scanning Requestor Date Regarding This Scan Date Received Time Initials Number of Tests Scored: / / : A.M. P

  4. Employment Verification and Compensation Release Authorization Form Forward the completed form

    E-Print Network [OSTI]

    Employment Verification and Compensation Release Authorization Form Forward the completed form: Via Research Triangle Park, NC 27709 Attn: Employment Verification Name information relative to my employment with the IBM Corporation

  5. Directory of Energy Data Collection Forms: Forms in use as of October 1996

    SciTech Connect (OSTI)

    NONE

    1996-12-01T23:59:59.000Z

    This is the twentieth edition of the Directory of Energy Collection Data Forms, an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy.

  6. Self-organized topology of recurrence-based complex networks

    SciTech Connect (OSTI)

    Yang, Hui, E-mail: huiyang@usf.edu; Liu, Gang [Complex Systems Monitoring, Modeling and Analysis Laboratory, University of South Florida, Tampa, Florida 33620 (United States)] [Complex Systems Monitoring, Modeling and Analysis Laboratory, University of South Florida, Tampa, Florida 33620 (United States)

    2013-12-15T23:59:59.000Z

    With the rapid technological advancement, network is almost everywhere in our daily life. Network theory leads to a new way to investigate the dynamics of complex systems. As a result, many methods are proposed to construct a network from nonlinear time series, including the partition of state space, visibility graph, nearest neighbors, and recurrence approaches. However, most previous works focus on deriving the adjacency matrix to represent the complex network and extract new network-theoretic measures. Although the adjacency matrix provides connectivity information of nodes and edges, the network geometry can take variable forms. The research objective of this article is to develop a self-organizing approach to derive the steady geometric structure of a network from the adjacency matrix. We simulate the recurrence network as a physical system by treating the edges as springs and the nodes as electrically charged particles. Then, force-directed algorithms are developed to automatically organize the network geometry by minimizing the system energy. Further, a set of experiments were designed to investigate important factors (i.e., dynamical systems, network construction methods, force-model parameter, nonhomogeneous distribution) affecting this self-organizing process. Interestingly, experimental results show that the self-organized geometry recovers the attractor of a dynamical system that produced the adjacency matrix. This research addresses a question, i.e., what is the self-organizing geometry of a recurrence network? and provides a new way to reproduce the attractor or time series from the recurrence plot. As a result, novel network-theoretic measures (e.g., average path length and proximity ratio) can be achieved based on actual node-to-node distances in the self-organized network topology. The paper brings the physical models into the recurrence analysis and discloses the spatial geometry of recurrence networks.

  7. Economics of Organic Rankine Cycle

    E-Print Network [OSTI]

    O'Brien, W. J.

    Flow Diagram of Rankine Cycle the power recovery. Thus, mechanical simplicity, good efficiency, small size and an inherent reliability make the Organic Rankine Cycle particularly suitable for extraction of power from low temperature waste heat... for recovering waste heat. Based on the waste heat temperature, electricity cost and quantity of heat available, Figure 3 can be used to determine whether a potential project has greater than 20% DCF (discounted cash flow) return (above the line) or less...

  8. ARM - Measurement - Organic Carbon Concentration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadap Documentation TDMADAP : XDCnarrowband upwelling irradiance ARMgovMeasurementsOrganic Carbon

  9. Directory of Energy Data Collection Forms: Forms in use as of October 1993

    SciTech Connect (OSTI)

    Not Available

    1993-12-28T23:59:59.000Z

    This is the seventeenth edition of the Directory of Energy Data Collection forms, an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy (DOE). Originally entitled EIA Data Collection forms, this directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry.

  10. Increasing subterranean mobilization of organic contaminants and petroleum by aqueous thermal oxidation

    DOE Patents [OSTI]

    Leif, Roald N. (San Francisco, CA); Knauss, Kevin G. (Livermore, CA); Newmark, Robin L. (Livermore, CA); Aines, Roger D. (Livermore, CA); Eaker, Craig (Alta Loma, CA)

    2002-01-01T23:59:59.000Z

    In situ hydrous pyrolysis/partial oxidation of organics at the site of the organics constrained in an subsurface reservoir produces surfactants that can form an oil/water emulsion that is effectively removed from an underground formation. The removal of the oil/water emulsions is particularly useful in several applications, e.g., soil contaminant remediation and enhanced oil recovery operations. A portion of the constrained organics react in heated reservoir water with injected steam containing dissolved oxygen gas at ambient reservoir conditions to produce such surfactants.

  11. Inorganic, Radioisotopic, and Organic Analysis of 241-AP-101 Tank Waste

    SciTech Connect (OSTI)

    Fiskum, S.K.; Bredt, P.R.; Campbell, J.A.; Farmer, O.T.; Greenwood, L.R.; Hoppe, E.W.; Hoopes, F.V.; Lumetta, G.J.; Mong, G.M.; Ratner, R.T.; Soderquist, C.Z.; Steele, M.J.; Swoboda, R.G.; Urie, M.W.; Wagner, J.J.

    2000-10-17T23:59:59.000Z

    Battelle received five samples from Hanford waste tank 241-AP-101, taken at five different depths within the tank. No visible solids or organic layer were observed in the individual samples. Individual sample densities were measured, then the five samples were mixed together to provide a single composite. The composite was homogenized and representative sub-samples taken for inorganic, radioisotopic, and organic analysis. All analyses were performed on triplicate sub-samples of the composite material. The sample composite did not contain visible solids or an organic layer. A subsample held at 10 C for seven days formed no visible solids.

  12. Organic photosensitive cells having a reciprocal-carrier exciton blocking layer

    DOE Patents [OSTI]

    Rand, Barry P. (Princeton, NJ); Forrest, Stephen R. (Princeton, NJ); Thompson, Mark E. (Anaheim Hills, CA)

    2007-06-12T23:59:59.000Z

    A photosensitive cell includes an anode and a cathode; a donor-type organic material and an acceptor-type organic material forming a donor-acceptor junction connected between the anode and the cathode; and an exciton blocking layer connected between the acceptor-type organic material of the donor-acceptor junction and the cathode, the blocking layer consisting essentially of a material that has a hole mobility of at least 10.sup.-7 cm.sup.2/V-sec or higher, where a HOMO of the blocking layer is higher than or equal to a HOMO of the acceptor-type material.

  13. Novel polymer nanocomposite composed of organic nanoparticles via self-assembly

    E-Print Network [OSTI]

    Dequan Xiao; Kunhua Lin; Qiang Fu; Qinjian Yin

    2009-03-20T23:59:59.000Z

    We report a novel class of polymer nanocomposite composed of organic nanoparticles dispersed in polymer matrix, with the particle sizes of 30-120 nm in radius. The organic nanoparticles were formed by the self-assembly of protonated poly(4-vinyl-pyridine)-r-poly(acrylonitrile) and amphiphilic metanil yellow dye molecules through electrostatic interactions in aqueous solution. A strongly broadened Raman shift band was probed, suggesting the presence of enhanced optoelectronic property from the polymer nanocomposite. Here, using random-copolymer polyelectrolytes and mesogenic amphiphiles as the designed building blocks for self-assembly, a new approach is acutally provided to fabricate organic nanoparticles.

  14. Preparation of hydrophobic organic aeorgels

    DOE Patents [OSTI]

    Baumann, Theodore F.; Satcher Jr., Joe H.; Gash, Alexander E.

    2004-10-19T23:59:59.000Z

    Synthetic methods for the preparation of hydrophobic organics aerogels. One method involves the sol-gel polymerization of 1,3-dimethoxybenzene or 1,3,5-trimethoxybenzene with formaldehyde in non-aqueous solvents. Using a procedure analogous to the preparation of resorcinol-formaldehyde (RF) aerogels, this approach generates wet gels that can be dried using either supercritical solvent extraction to generate the new organic aerogels or air dried to produce an xerogel. Other methods involve the sol-gel polymerization of 1,3,5 trihydroxy benzene (phloroglucinol) or 1,3 dihydroxy benzene (resorcinol) and various aldehydes in non-aqueous solvents. These methods use a procedure analogous to the one-step base and two-step base/acid catalyzed polycondensation of phloroglucinol and formaldehyde, but the base catalyst used is triethylamine. These methods can be applied to a variety of other sol-gel precursors and solvent systems. These hydrophobic organics aerogels have numerous application potentials in the field of material absorbers and water-proof insulation.

  15. Preparation of hydrophobic organic aeorgels

    SciTech Connect (OSTI)

    Baumann, Theodore F. (Tracy, CA); Satcher, Jr., Joe H. (Patterson, CA); Gash, Alexander E. (Livermore, CA)

    2007-11-06T23:59:59.000Z

    Synthetic methods for the preparation of hydrophobic organics aerogels. One method involves the sol-gel polymerization of 1,3-dimethoxybenzene or 1,3,5-trimethoxybenzene with formaldehyde in non-aqueous solvents. Using a procedure analogous to the preparation of resorcinol-formaldehyde (RF) aerogels, this approach generates wet gels that can be dried using either supercritical solvent extraction to generate the new organic aerogels or air dried to produce an xerogel. Other methods involve the sol-gel polymerization of 1,3,5 trihydroxy benzene (phloroglucinol) or 1,3 dihydroxy benzene (resorcinol) and various aldehydes in non-aqueous solvents. These methods use a procedure analogous to the one-step base and two-step base/acid catalyzed polycondensation of phloroglucinol and formaldehyde, but the base catalyst used is triethylamine. These methods can be applied to a variety of other sol-gel precursors and solvent systems. These hydrophobic organics aerogels have numerous application potentials in the field of material absorbers and water-proof insulation.

  16. Dry lubricant films for aluminum forming.

    SciTech Connect (OSTI)

    Wei, J.; Erdemir, A.; Fenske, G. R.

    1999-03-30T23:59:59.000Z

    During metal forming process, lubricants are crucial to prevent direct contact, adhesion, transfer and scuffing of workpiece materials and tools. Boric acid films can be firmly adhered to the clean aluminum surfaces by spraying their methanol solutions and provide extremely low friction coefficient (about 0.04). The cohesion strengths of the bonded films vary with the types of aluminum alloys (6061, 6111 and 5754). The sheet metal forming tests indicate that boric acid films and the combined films of boric acid and mineral oil can create larger strains than the commercial liquid and solid lubricants, showing that they possess excellent lubricities for aluminum forming. SEM analyses indicate that boric acid dry films separate the workpiece and die materials, and prevent their direct contact and preserve their surface qualities. Since boric acid is non-toxic and easily removed by water, it can be expected that boric acid films are environmentally friendly, cost effective and very efficient lubricants for sheet aluminum cold forming.

  17. Employee Concerns Reporting Form | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    25 26 27 28 29 30 31 Year 2014 2015 2016 *Name or Code Word**: Phone number: Use format xxx-xxx-xxxx *Correspondence Address: Submit Form Your concerns will be sent to the DOE...

  18. Pulse Pressure Forming of Lightweight Materials, Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C. lm015smith2010o.pdf More Documents & Publications Pulse-Pressure Forming of Lightweight Metals...

  19. MDF Form and Function (Text Version)

    Broader source: Energy.gov [DOE]

    This is a text version of the Manufacturing Demonstration Facilities (MDF) Form and Function video, originally presented on March 12, 2012 at the MDF Workshop held in Chicago, Illinois.

  20. Contractual form, retail price and asset characteristics

    E-Print Network [OSTI]

    Shepard, Andrea

    1991-01-01T23:59:59.000Z

    Predictions derived from a principal-agent analysis of the manufacturer-retailer relationship are derived and tested using microdata on contractual form, outlet characteristics and retail prices for gasoline stations in ...

  1. Oklahoma 4-H Enrollment Form Today's Date: ___________________

    E-Print Network [OSTI]

    Ghajar, Afshin J.

    - wind, electric, hydro, solar, gas, oil, coal, etc. EOklahoma 4-H Enrollment Form Today's Date: ___________________ Personal Information First Name student/child to receive direct electric/USP communications from 4-H / OCES staff for educational

  2. Assessment of Preferred Depleted Uranium Disposal Forms

    SciTech Connect (OSTI)

    Croff, A.G.; Hightower, J.R.; Lee, D.W.; Michaels, G.E.; Ranek, N.L.; Trabalka, J.R.

    2000-06-01T23:59:59.000Z

    The Department of Energy (DOE) is in the process of converting about 700,000 metric tons (MT) of depleted uranium hexafluoride (DUF6) containing 475,000 MT of depleted uranium (DU) to a stable form more suitable for long-term storage or disposal. Potential conversion forms include the tetrafluoride (DUF4), oxide (DUO2 or DU3O8), or metal. If worthwhile beneficial uses cannot be found for the DU product form, it will be sent to an appropriate site for disposal. The DU products are considered to be low-level waste (LLW) under both DOE orders and Nuclear Regulatory Commission (NRC) regulations. The objective of this study was to assess the acceptability of the potential DU conversion products at potential LLW disposal sites to provide a basis for DOE decisions on the preferred DU product form and a path forward that will ensure reliable and efficient disposal.

  3. Asset Management Equipment Disposal Form -Refrigerant Recovery

    E-Print Network [OSTI]

    Sin, Peter

    Asset Management Equipment Disposal Form - Refrigerant Recovery Safe Disposal Requirements Under refrigeration, cold storage warehouse refrigeration, chillers, and industrial process refrigeration) has to have the refrigerant recovered in accordance with EPA's requirements for servicing. However, equipment that typically

  4. DeLib Materials Donation Form Address

    E-Print Network [OSTI]

    Chen, Tsuhan

    DeLib Materials Donation Form Name: Address: Phone Materials:____________ I, ______________________________ (signature), hereby deed this gift of library materials to the Distributed eLibrary of Weill Cornell Medical

  5. Front contact solar cell with formed emitter

    DOE Patents [OSTI]

    Cousins, Peter John

    2014-11-04T23:59:59.000Z

    A bipolar solar cell includes a backside junction formed by an N-type silicon substrate and a P-type polysilicon emitter formed on the backside of the solar cell. An antireflection layer may be formed on a textured front surface of the silicon substrate. A negative polarity metal contact on the front side of the solar cell makes an electrical connection to the substrate, while a positive polarity metal contact on the backside of the solar cell makes an electrical connection to the polysilicon emitter. An external electrical circuit may be connected to the negative and positive metal contacts to be powered by the solar cell. The positive polarity metal contact may form an infrared reflecting layer with an underlying dielectric layer for increased solar radiation collection.

  6. Front contact solar cell with formed emitter

    DOE Patents [OSTI]

    Cousins, Peter John (Menlo Park, CA)

    2012-07-17T23:59:59.000Z

    A bipolar solar cell includes a backside junction formed by an N-type silicon substrate and a P-type polysilicon emitter formed on the backside of the solar cell. An antireflection layer may be formed on a textured front surface of the silicon substrate. A negative polarity metal contact on the front side of the solar cell makes an electrical connection to the substrate, while a positive polarity metal contact on the backside of the solar cell makes an electrical connection to the polysilicon emitter. An external electrical circuit may be connected to the negative and positive metal contacts to be powered by the solar cell. The positive polarity metal contact may form an infrared reflecting layer with an underlying dielectric layer for increased solar radiation collection.

  7. DISCIPLINARY ACTION FORM OFFICE OF STUDENT EMPLOYMENT

    E-Print Network [OSTI]

    Yang, Eui-Hyeok

    DISCIPLINARY ACTION FORM OFFICE OF STUDENT EMPLOYMENT Student Name Date Supervisor Department Supervisor, Student Employment Coordinator and Financial Aid. Please include your ext or best way to reach you. Regular Student Employee needs mediation meeting between Supervisor, Student Employment

  8. University of Alberta Library Release Form

    E-Print Network [OSTI]

    Alberta, University of

    University of Alberta Library Release Form Name of Author: Luca Pireddu Title of Thesis: Pathway: 2005 Permission is hereby granted to the University of Alberta Library to reproduce single copies . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Enzyme classification . . . . . . . . .

  9. Browse : re-forming the urban library

    E-Print Network [OSTI]

    Baron, Sandra Ann

    2007-01-01T23:59:59.000Z

    The urban library has persisted as a cultural entity, largely because its interiorized form functions as a vault, creating a clear, although often intimidating, boundary between library program and the public realm. While ...

  10. CC: Security, Residential Life Evacuation Assistance Form

    E-Print Network [OSTI]

    Mahon, Bradford Z.

    CC: Security, Residential Life Evacuation Assistance Form Voluntary Self-Identification If you have will be kept confidential and used only by Environmental Health and Safety, Residential Life (if applicable

  11. The Post-Dictatorial Thriller Form

    E-Print Network [OSTI]

    Powell, Audrey Bryant

    2012-07-16T23:59:59.000Z

    Agamben, Carl Schmitt and Carlo Galli, this project makes an original inquiry into why the thriller emerges as the most apt narrative framework for exploring the forms of violence in present-day Latin America....

  12. Form W-8BEN (Rev. February 2006)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    statement as required. A U.S. citizen or other U.S. person, including a resident alien individual W-9 Private foundation Note: These entities should use Form W-8BEN if they...

  13. Elevated temperature forming method and preheater apparatus

    DOE Patents [OSTI]

    Krajewski, Paul E; Hammar, Richard Harry; Singh, Jugraj; Cedar, Dennis; Friedman, Peter A; Luo, Yingbing

    2013-06-11T23:59:59.000Z

    An elevated temperature forming system in which a sheet metal workpiece is provided in a first stage position of a multi-stage pre-heater, is heated to a first stage temperature lower than a desired pre-heat temperature, is moved to a final stage position where it is heated to a desired final stage temperature, is transferred to a forming press, and is formed by the forming press. The preheater includes upper and lower platens that transfer heat into workpieces disposed between the platens. A shim spaces the upper platen from the lower platen by a distance greater than a thickness of the workpieces to be heated by the platens and less than a distance at which the upper platen would require an undesirably high input of energy to effectively heat the workpiece without being pressed into contact with the workpiece.

  14. Conjugated Polymer Design and Engineering for Organic Electronics

    E-Print Network [OSTI]

    Woo, Claire Hoi Kar

    2011-01-01T23:59:59.000Z

    organic photovoltaics (OPVs), with reported efficiencies asseparation efficiency in organic photovoltaics. 15CI, a

  15. Innovative forming and fabrication technologies : new opportunities.

    SciTech Connect (OSTI)

    Davis, B.; Hryn, J.; Energy Systems; Kingston Process Metallurgy, Inc.

    2008-01-31T23:59:59.000Z

    The advent of light metal alloys and advanced materials (polymer, composites, etc.) have brought the possibility of achieving important energy reductions into the full life cycle of these materials, especially in transportation applications. 1 These materials have gained acceptance in the aerospace industry but use of light metal alloys needs to gain wider acceptance in other commercial transportation areas. Among the main reasons for the relatively low use of these materials are the lack of manufacturability, insufficient mechanical properties, and increased material costs due to processing inefficiencies. Considering the enormous potential energy savings associated with the use of light metal alloys and advanced materials in transportation, there is a need to identify R&D opportunities in the fields of materials fabrication and forming aimed at developing materials with high specific mechanical properties combined with energy efficient processes and good manufacturability. This report presents a literature review of the most recent developments in the areas of fabrication and metal forming focusing principally on aluminum alloys. In the first section of the document, the different sheet manufacturing technologies including direct chill (DC) casting and rolling, spray forming, spray rolling, thin slab, and strip casting are reviewed. The second section of the document presents recent research on advanced forming processes. The various forming processes reviewed are: superplastic forming, electromagnetic forming, age forming, warm forming, hydroforming, and incremental forming. Optimization of conventional forming processes is also discussed. Potentially interesting light metal alloys for high structural efficiency including aluminum-scandium, aluminum-lithium, magnesium, titanium, and amorphous metal alloys are also reviewed. This section concludes with a discussion on alloy development for manufacturability. The third section of the document reviews the latest developments in fiber-reinforced composite materials. Emerging curing processes are presented along with a discussion on the possible developments in biocomposite materials. The fourth section presents recent developments in the fabrication of bulk nanomaterials and nanoparticles reinforced materials. Advanced joining technologies are presented in the fifth section. Future research is proposed in the last section.

  16. Method of forming a chemical composition

    DOE Patents [OSTI]

    Bingham, Dennis N. (Idaho Falls, ID); Wilding, Bruce M. (Idaho Falls, ID); Klingler, Kerry M. (Idaho Falls, ID); Zollinger, William T. (Idaho Falls, ID); Wendt, Kraig M. (Idaho Falls, ID)

    2007-10-09T23:59:59.000Z

    A method of forming a chemical composition such as a chemical hydride is described and which includes the steps of selecting a composition having chemical bonds and which is capable of forming a chemical hydride; providing a source of hydrogen; and exposing the selected composition to an amount of ionizing radiation to encourage the changing of the chemical bonds of the selected composition, and chemically reacting the selected composition with the source of hydrogen to facilitate the formation of a chemical hydride.

  17. Pion form factor with chirally improved fermions

    E-Print Network [OSTI]

    Stefano Capitani; Christof Gattringer; C. B. Lang

    2005-09-12T23:59:59.000Z

    We present results for Monte Carlo calculations of the electromagnetic vector and scalar form factors of the pion in a quenched simulation. We work at a lattice spacing of 0.15 fm and use two lattice volumes up to a spatial size of 2.4 fm. The pion form factors in the space-like region are determined for pion masses down to 340 MeV.

  18. SEPARATIONS AND WASTE FORMS CAMPAIGN IMPLEMENTATION PLAN

    SciTech Connect (OSTI)

    Vienna, John D.; Todd, Terry A.; Peterson, Mary E.

    2012-11-26T23:59:59.000Z

    This Separations and Waste Forms Campaign Implementation Plan provides summary level detail describing how the Campaign will achieve the objectives set-forth by the Fuel Cycle Reasearch and Development (FCRD) Program. This implementation plan will be maintained as a living document and will be updated as needed in response to changes or progress in separations and waste forms research and the FCRD Program priorities.

  19. Method for forming cooperative binary ionic solids

    DOE Patents [OSTI]

    Shelnutt, John A.; Martin, Kathleen E.; Wang, Zhongchun; Medforth, Craig J.

    2014-09-09T23:59:59.000Z

    A nanostructured molecular unit and method for forming is described where a cationic porphyrin having an ethanolic substituent species and a metal in the porphyrin cavity is combined with an anionic porphyrin having a sulfonate substituent species and a metal in the porphyrin cavity to form by self-assembly a nanostructured molecular unit with a morphology comprising four dendritic elements connected at a central node.

  20. Radionuclide Retention in Concrete Waste Forms

    SciTech Connect (OSTI)

    Mattigod, Shas V.; Bovaird, Chase C.; Wellman, Dawn M.; Wood, Marcus I.

    2010-09-30T23:59:59.000Z

    Assessing long-term performance of Category 3 waste cement grouts for radionuclide encasement requires knowledge of the radionuclide-cement interactions and mechanisms of retention (i.e., sorption or precipitation); the mechanism of contaminant release; the significance of contaminant release pathways; how waste form performance is affected by the full range of environmental conditions within the disposal facility; the process of waste form aging under conditions that are representative of processes occurring in response to changing environmental conditions within the disposal facility; the effect of waste form aging on chemical, physical, and radiological properties; and the associated impact on contaminant release. This knowledge will enable accurate prediction of radionuclide fate when the waste forms come in contact with groundwater. The information presented in the report provides data that 1) quantify radionuclide retention within concrete waste form materials similar to those used to encapsulate waste in the Low-Level Waste Burial Grounds (LLBG); 2) measure the effect of concrete waste form properties likely to influence radionuclide migration; and 3) quantify the stability of uranium-bearing solid phases of limited solubility in concrete.

  1. Process for forming transparent aerogel insulating arrays

    DOE Patents [OSTI]

    Tewari, P.H.; Hunt, A.J.

    1985-09-04T23:59:59.000Z

    An improved supercritical drying process for forming transparent silica aerogel arrays is described. The process is of the type utilizing the steps of hydrolyzing and condensing aloxides to form alcogels. A subsequent step removes the alcohol to form aerogels. The improvement includes the additional step, after alcogels are formed, of substituting a solvent, such as CO/sub 2/, for the alcohol in the alcogels, the solvent having a critical temperature less than the critical temperature of the alcohol. The resulting gels are dried at a supercritical temperature for the selected solvent, such as CO/sub 2/, to thereby provide a transparent aerogel array within a substantially reduced (days-to-hours) time period. The supercritical drying occurs at about 40/sup 0/C instead of at about 270/sup 0/C. The improved process provides increased yields of large scale, structurally sound arrays. The transparent aerogel array, formed in sheets or slabs, as made in accordance with the improved process, can replace the air gap within a double glazed window, for example, to provide a substantial reduction in heat transfer. The thus formed transparent aerogel arrays may also be utilized, for example, in windows of refrigerators and ovens, or in the walls and doors thereof or as the active material in detectors for analyzing high energy elementary particles or cosmic rays.

  2. Process for forming transparent aerogel insulating arrays

    DOE Patents [OSTI]

    Tewari, Param H. (Milpitas, CA); Hunt, Arlon J. (Oakland, CA)

    1986-01-01T23:59:59.000Z

    An improved supercritical drying process for forming transparent silica aerogel arrays is described. The process is of the type utilizing the steps of hydrolyzing and condensing aloxides to form alcogels. A subsequent step removes the alcohol to form aerogels. The improvement includes the additional step, after alcogels are formed, of substituting a solvent, such as CO.sub.2, for the alcohol in the alcogels, the solvent having a critical temperature less than the critical temperature of the alcohol. The resulting gels are dried at a supercritical temperature for the selected solvent, such as CO.sub.2, to thereby provide a transparent aerogel array within a substantially reduced (days-to-hours) time period. The supercritical drying occurs at about 40.degree. C. instead of at about 270.degree. C. The improved process provides increased yields of large scale, structurally sound arrays. The transparent aerogel array, formed in sheets or slabs, as made in accordance with the improved process, can replace the air gap within a double glazed window, for example, to provide a substantial reduction in heat transfer. The thus formed transparent aerogel arrays may also be utilized, for example, in windows of refrigerators and ovens, or in the walls and doors thereof or as the active material in detectors for analyzing high energy elementry particles or cosmic rays.

  3. Adapting to contradiction : competing models of organization in the United States organic foods industry

    E-Print Network [OSTI]

    Haedicke, Michael Anthony

    2008-01-01T23:59:59.000Z

    Social movements and organization theory (pp. 4-40). NewSocial movements and organization theory (pp. 41-68).Social movements and organization theory (pp. 351-365). New

  4. U.S. BURNING PLASMA ORGANIZATION ACTIVITIES

    SciTech Connect (OSTI)

    Raymond J. Fonck

    2009-08-11T23:59:59.000Z

    The national U.S. Burning Plasma Organization (USBPO) was formed to provide an umbrella structure in the U.S. fusion science research community. Its main purpose is the coordination of research activities in the U.S. program relevant to burning plasma science and preparations for participation in the international ITER experiment. This grant provided support for the continuing development and operations of the USBPO in its first years of existence. A central feature of the USBPO is the requirement for broad community participation in and governance of this effort. We concentrated on five central areas of activity of the USBPO during this grant period. These included: 1) activities of the Director and support staff in continuing management and development of the USBPO activity; 2) activation of the advisory Council; 3) formation and initial research activities of the research community Topical Groups; 4) formation of Task Groups to perform specific burning plasma related research and development activities; 5) integration of the USBPO community with the ITER Project Office as needed to support ITER development in the U.S.

  5. CARES Helps Explain Secondary Organic Aerosols

    SciTech Connect (OSTI)

    Zaveri, Rahul

    2014-03-28T23:59:59.000Z

    What happens when urban man-made pollution mixes with what we think of as pristine forest air? To know more about what this interaction means for the climate, the Carbonaceous Aerosol and Radiative Effects Study, or CARES, field campaign was designed in 2010. The sampling strategy during CARES was coordinated with CalNex 2010, another major field campaign that was planned in California in 2010 by the California Air Resources Board (CARB), the National Oceanic and Atmospheric Administration (NOAA), and the California Energy Commission (CEC). "We found two things. When urban pollution mixes with forest pollutions we get more secondary organic aerosols," said Rahul Zaveri, FCSD scientist and project lead on CARES. "SOAs are thought to be formed primarily from forest emissions but only when they interact with urban emissions. The data is saying that there will be climate cooling over the central California valley because of these interactions." Knowledge gained from detailed analyses of data gathered during the CARES campaign, together with laboratory experiments, is being used to improve existing climate models.

  6. CARES Helps Explain Secondary Organic Aerosols

    ScienceCinema (OSTI)

    Zaveri, Rahul

    2014-06-02T23:59:59.000Z

    What happens when urban man-made pollution mixes with what we think of as pristine forest air? To know more about what this interaction means for the climate, the Carbonaceous Aerosol and Radiative Effects Study, or CARES, field campaign was designed in 2010. The sampling strategy during CARES was coordinated with CalNex 2010, another major field campaign that was planned in California in 2010 by the California Air Resources Board (CARB), the National Oceanic and Atmospheric Administration (NOAA), and the California Energy Commission (CEC). "We found two things. When urban pollution mixes with forest pollutions we get more secondary organic aerosols," said Rahul Zaveri, FCSD scientist and project lead on CARES. "SOAs are thought to be formed primarily from forest emissions but only when they interact with urban emissions. The data is saying that there will be climate cooling over the central California valley because of these interactions." Knowledge gained from detailed analyses of data gathered during the CARES campaign, together with laboratory experiments, is being used to improve existing climate models.

  7. Method for forming a cell separator for use in bipolar-stack energy storage devices

    DOE Patents [OSTI]

    Mayer, Steven T. (San Leandro, CA); Feikert, John H. (Livermore, CA); Kaschmitter, James L. (Pleasanton, CA); Pekala, Richard W. (Pleasant Hill, CA)

    1994-01-01T23:59:59.000Z

    An improved multi-cell electrochemical energy storage device, such as a battery, fuel cell, or double layer capacitor using a cell separator which allows cells to be stacked and interconnected with low electrical resistance and high reliability while maximizing packaging efficiency. By adding repeating cells, higher voltages can be obtained. The cell separator is formed by applying an organic adhesive on opposing surfaces of adjacent carbon electrodes or surfaces of aerogel electrodes of a pair of adjacent cells prior to or after pyrolysis thereof to form carbon aerogel electrodes. The cell separator is electronically conductive, but ionically isolating, preventing an electrolytic conduction path between adjacent cells in the stack.

  8. Method for forming a cell separator for use in bipolar-stack energy storage devices

    DOE Patents [OSTI]

    Mayer, S.T.; Feikert, J.H.; Kaschmitter, J.L.; Pekala, R.W.

    1994-08-09T23:59:59.000Z

    An improved multi-cell electrochemical energy storage device, such as a battery, fuel cell, or double layer capacitor using a cell separator which allows cells to be stacked and interconnected with low electrical resistance and high reliability while maximizing packaging efficiency. By adding repeating cells, higher voltages can be obtained. The cell separator is formed by applying an organic adhesive on opposing surfaces of adjacent carbon electrodes or surfaces of aerogel electrodes of a pair of adjacent cells prior to or after pyrolysis thereof to form carbon aerogel electrodes. The cell separator is electronically conductive, but ionically isolating, preventing an electrolytic conduction path between adjacent cells in the stack. 2 figs.

  9. Method of forming aluminum oxynitride material and bodies formed by such methods

    DOE Patents [OSTI]

    Bakas, Michael P. (Ammon, ID) [Ammon, ID; Lillo, Thomas M. (Idaho Falls, ID) [Idaho Falls, ID; Chu, Henry S. (Idaho Falls, ID) [Idaho Falls, ID

    2010-11-16T23:59:59.000Z

    Methods of forming aluminum oxynitride (AlON) materials include sintering green bodies comprising aluminum orthophosphate or another sacrificial material therein. Such green bodies may comprise aluminum, oxygen, and nitrogen in addition to the aluminum orthophosphate. For example, the green bodies may include a mixture of aluminum oxide, aluminum nitride, and aluminum orthophosphate or another sacrificial material. Additional methods of forming aluminum oxynitride (AlON) materials include sintering a green body including a sacrificial material therein, using the sacrificial material to form pores in the green body during sintering, and infiltrating the pores formed in the green body with a liquid infiltrant during sintering. Bodies are formed using such methods.

  10. Hybrid inorganic-organic, organic charge transfer, and radical based compounds with chalcofulvalene donors and organic acceptors

    E-Print Network [OSTI]

    Reinheimer, Eric Wade

    2009-05-15T23:59:59.000Z

    HYBRID INORGANIC-ORGANIC, ORGANIC CHARGE TRANSFER, AND RADICAL BASED COMPOUNDS WITH CHALCOFULVALENE DONORS AND ORGANIC ACCEPTORS A Dissertation by ERIC WADE REINHEIMER Submitted to the Office of Graduate Studies... COMPOUNDS WITH CHALCOFULVALENE DONORS AND ORGANIC ACCEPTORS A Dissertation by ERIC WADE REINHEIMER Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree...

  11. Organic tanks safety program FY96 waste aging studies

    SciTech Connect (OSTI)

    Camaioni, D.M.; Samuels, W.D.; Linehan, J.C.; Clauss, S.A.; Sharma, A.K.; Wahl, K.L.; Campbell, J.A.

    1996-10-01T23:59:59.000Z

    Uranium and plutonium production at the Hanford Site produced large quantities of radioactive by-products and contaminated process chemicals, which are stored in underground tanks awaiting treatment and disposal. Having been made strongly alkaline and then subjected to successive water evaporation campaigns to increase storage capacity, the wastes now exist in the physical forms of salt cakes, metal oxide sludges, and partially saturated aqueous brine solutions. The tanks that contain organic process chemicals mixed with nitrate/nitrite salt wastes may be at risk for fuel- nitrate combustion accidents. The purpose of the Waste Aging Task is to elucidate how chemical and radiological processes will have aged or degraded the organic compounds stored in the tanks. Ultimately, the task seeks to develop quantitative measures of how aging changes the energetic properties of the wastes. This information will directly support efforts to evaluate the hazard as well as to develop potential control and mitigation strategies.

  12. Solution processed nickel oxide anodes for organic photovoltaic devices

    SciTech Connect (OSTI)

    Mustafa, Bestoon; Griffin, Jonathan; Alsulami, Abdullah S.; Lidzey, David G.; Buckley, Alastair R., E-mail: alastair.buckley@sheffield.ac.uk [Department of Physics and Astronomy, Hicks Building, Hounsfield Road, University of Sheffield, Sheffield S3 7RH (United Kingdom)

    2014-02-10T23:59:59.000Z

    Nickel oxide thin films have been prepared from a nickel acetylacetonate (Ni(acac)) precursor for use in bulk heterojunction organic photovoltaic devices. The conversion of Ni(acac) to NiO{sub x} has been investigated. Oxygen plasma treatment of the NiO layer after annealing at 400?C affords solar cell efficiencies of 5.2%. Photoelectron spectroscopy shows that high temperature annealing converts the Ni(acac) to a reduced form of nickel oxide. Additional oxygen plasma treatment further oxidizes the surface layers and deepens the NiO work function from 4.7?eV for the annealed film, to 5.0?eV allowing for efficient hole extraction at the organic interface.

  13. Reaction-Forming Method for Producing Near Net-Shape Refractory Metal Carbides

    DOE Patents [OSTI]

    Palmisiano, Marc N.; Jakubenas, Kevin J.; Baranwal, Rita

    2004-07-20T23:59:59.000Z

    A method for reaction forming refractory metal carbides. The method involves the fabrication of a glassy carbon preform by casting an organic, resin-based liquid mixture into a mold and subsequently heat treating it in two steps, which cures and pyrolizes the resin resulting in a porous carbon preform. By varying the amounts of the constituents in the organic, resin-based liquid mixture, control over the density of the carbon preform is obtained. Control of the density and microstructure of the carbon preform allows for determination of the microstructure and properties of the refractory metal carbide material produced. The glassy carbon preform is placed on a bed of refractory metal or refractory metal--silicon alloy. The pieces are heated above the melting point of the metal or alloy. The molten metal wicks inside the porous carbon preform and reacts, forming the refractory metal carbide or refractory metal carbide plus a minor secondary phase.

  14. Directory of energy data collection forms. Forms in use as of October 1995

    SciTech Connect (OSTI)

    NONE

    1996-01-01T23:59:59.000Z

    This is an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy (DOE). This directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry. Forms designed to collect energy information and used by the Energy Information Administration (EIA) as of October 1995 are included in this directory. For each form listed in this directory, an abstract is included that describes the form`s uses, its respondents, and the data collected. For the reader`s convenience in finding specific types of collections, several indices have been provided in this directory. A listing of the forms grouped by energy source and function begins on page 26. Beginning on page 38 are the publications derived from the collections, and on page 50, are the forms linked to general respondent categories.

  15. A water-processable organic electron-selective layer for solution-processed inverted organic solar cells

    SciTech Connect (OSTI)

    Chen, Dongcheng; Zhou, Hu; Cai, Ping; Sun, Shi; Ye, Hua; Su, Shi-Jian, E-mail: mssjsu@scut.edu.cn; Cao, Yong [State Key Laboratory of Luminescent Materials and Devices (South China University of Technology) and Institute of Polymer Optoelectronic Materials and Devices, South China University of Technology, Guangzhou 510640 (China)

    2014-02-03T23:59:59.000Z

    A triazine- and pyridinium-containing water-soluble material of 1,1?,1?-(4,4?,4?-(1,3,5-triazine-2,4,6-triyl)tris(benzene-4,1-diyl)) tris(methylene)tripyridinium bromide (TzPyBr) was developed as an organic electron-selective layer in solution-processed inverted organic solar cells due to its strong anti-erosion capacity against non-polar organic solvents commonly used for the active layer. Ohmic-like contact with the adjacent active materials like fullerene derivatives is speculated to be formed, as confirmed by the work-function measurements with scanning Kelvin probe and ultraviolet photoelectron spectroscopy techniques. Besides, considering the deep highest occupied molecular orbital energy level of TzPyBr, excellent hole-blocking property of the electron-selective layer is also anticipated. The inverted organic photovoltaic devices based on the TzPyBr/ITO (indium tin oxide) bilayer cathode exhibit dramatically enhanced performance compared to the control devices with bare ITO as the cathode and even higher efficiency than the conventional type devices with ITO and Al as the electrodes.

  16. FY 2015 Summary Control Table by Organization

    Energy Savers [EERE]

    5 Summary Control Table by Organization (dollars in thousands - OMB Scoring) Summary Control by Organization Page 1 FY 2015 Congressional Request FY 2013 FY 2014 FY 2014 FY 2014 FY...

  17. Postsynthetic modification of metal-organic frameworks

    E-Print Network [OSTI]

    Tanabe, Kristine Kimie

    2011-01-01T23:59:59.000Z

    S. M. "Tuning Hydrogen Sorption Properties of Metal-OrganicS. M. "Tuning Hydrogen Sorption Properties of Metal-OrganicA summary of hydrogen sorption properties of three distinct

  18. Statistical Review of California's Organic Agriculture

    E-Print Network [OSTI]

    Ferrara, Katherine W.

    Statistical Review of California's Organic Agriculture 2005 2009 Karen Klonsky Kurt Richter Agricultural Issues Center University of California March 2011 #12;Statistical Review of California's Organic Agriculture 2005 2009 Karen Klonsky Extension Specialist Department of Agricultural and Resource Economics

  19. Organic agriculture cannot replace conventional agriculture

    E-Print Network [OSTI]

    Kolokolnikov, Theodore

    Organic agriculture cannot replace conventional agriculture Sina Adl , David Iron and Theodore Agriculture | Pathogen Dispersal Introduction Organic farming [1, 2] is gaining in popularity in Eu- rope, because or- ganic agriculture avoids using environmentally harmful chem- icals that pollute soil

  20. Spin injection and manipulation in organic semiconductors

    E-Print Network [OSTI]

    Venkataraman, Karthik (Karthik Raman)

    2011-01-01T23:59:59.000Z

    The use of organic semiconductors to enable organic spintronic devices requires the understanding of transport and control of the spin state of the carriers. This thesis deals with the above issue, focusing on the interface ...

  1. Rational design of hybrid organic solar cells

    E-Print Network [OSTI]

    Lentz, Levi (Levi Carl)

    2014-01-01T23:59:59.000Z

    In this thesis, we will present a novel design for a nano-structured organic-inorganic hybrid photovoltaic material that will address current challenges in bulk heterojunction (BHJ) organic-based solar cell materials. ...

  2. Nonaqueous composition for slip casting or cold forming refractory material into solid shapes

    SciTech Connect (OSTI)

    Montgomery, L.C.

    1993-08-24T23:59:59.000Z

    A composition is described for slip casting or cold forming non-oxide refractory material(s) into solid shape comprising finely divided solid refractory materials selected from the group consisting of metal boride, refractory carbide, nitride, silicide and a refractory metal of tungsten, molybdenum, tantalum and chromium suspended in a nonaqueous liquid slip composition consisting essentially of a deflocculent composed of a vinyl chloride-vinyl acetate resin dissolved in an organic solvent.

  3. Method of stripping metals from organic solvents

    DOE Patents [OSTI]

    Todd, Terry A. (Aberdeen, ID); Law, Jack D. (Pocatello, ID); Herbst, R. Scott (Idaho Falls, ID); Romanovskiy, Valeriy N. (St. Petersburg, RU); Smirnov, Igor V. (St.-Petersburg, RU); Babain, Vasily A. (St-Petersburg, RU); Esimantovski, Vyatcheslav M. (St-Petersburg, RU)

    2009-02-24T23:59:59.000Z

    A new method to strip metals from organic solvents in a manner that allows for the recycle of the stripping agent. The method utilizes carbonate solutions of organic amines with complexants, in low concentrations, to strip metals from organic solvents. The method allows for the distillation and reuse of organic amines. The concentrated metal/complexant fraction from distillation is more amenable to immobilization than solutions resulting from current practice.

  4. FAA Air Traffic Organization Safety Management

    Broader source: Energy.gov [DOE]

    Presenter: Mark DeNicuolo, Manager Performance and Analyses Air Traffic Organization Safety and Technical Training Federal Aviation Administration

  5. Forms Supplement page -1 Export Administration Regulations January 2001

    E-Print Network [OSTI]

    Bernstein, Daniel

    Forms Supplement page - 1 Export Administration Regulations January 2001 #12;Forms Supplement page - 2 Export Administration Regulations January 2001 #12;Forms Supplement page - 3 Export Administration Regulations January 2001 #12;Forms Supplement page - 4 Export Administration Regulations January 2001 #12

  6. Formed Core Sampler Hydraulic Conductivity Testing

    SciTech Connect (OSTI)

    Miller, D. H.; Reigel, M. M.

    2012-09-25T23:59:59.000Z

    A full-scale formed core sampler was designed and functionally tested for use in the Saltstone Disposal Facility (SDF). Savannah River National Laboratory (SRNL) was requested to compare properties of the formed core samples and core drilled samples taken from adjacent areas in the full-scale sampler. While several physical properties were evaluated, the primary property of interest was hydraulic conductivity. Differences in hydraulic conductivity between the samples from the formed core sampler and those representing the bulk material were noted with respect to the initial handling and storage of the samples. Due to testing conditions, the site port samples were exposed to uncontrolled temperature and humidity conditions prior to testing whereas the formed core samples were kept in sealed containers with minimal exposure to an uncontrolled environment prior to testing. Based on the results of the testing, no significant differences in porosity or density were found between the formed core samples and those representing the bulk material in the test stand.

  7. Organic materials for second harmonic generation. Final report

    SciTech Connect (OSTI)

    Twieg, R.J. (comp.)

    1985-03-31T23:59:59.000Z

    Materials were chosen by screening the Cambridge Crystallographic Index for new noncentrosymmetric crystalline compounds, by screening commercially available materials or by synthesis of unique new substances. Measurements were then made on the powder form of these materials. Langmuir-Blodgett films were deposited and studied. In addition to the above studies, a computer program was developed to calculate (hyper) polarizabilities of organic molecules and thus aid in the selection of materials for testing. The nonlinear molecules have been divided into three classes according to absorption cutoff: 400 to 500 nm, 300 to 400 nm, and 200 to 300 nm. 108 refs., 7 tabs. (WRF)

  8. Volatile organic compound sensor system

    DOE Patents [OSTI]

    Schabron, John F. (Laramie, WY); Rovani, Jr., Joseph F. (Laramie, WY); Bomstad, Theresa M. (Laramie, WY); Sorini-Wong, Susan S. (Laramie, WY)

    2009-02-10T23:59:59.000Z

    Generally, this invention relates to the development of field monitoring methodology for new substances and sensing chemical warfare agents (CWAs) and terrorist substances. It also relates to a portable test kit which may be utilized to measure concentrations of halogenated volatile organic compounds (VOCs) in the field. Specifically it relates to systems for reliably field sensing the potential presence of such items while also distinguishing them from other elements potentially present. It also relates to overall systems and processes for sensing, reacting, and responding to an indicated presence of such substance, including modifications of existing halogenated sensors and arrayed sensing systems and methods.

  9. Volatile organic compound sensor system

    DOE Patents [OSTI]

    Schabron, John F. (Laramie, WY); Rovani, Jr., Joseph F. (Laramie, WY); Bomstad, Theresa M. (Waxahachie, TX); Sorini-Wong, Susan S. (Laramie, WY); Wong, Gregory K. (Laramie, WY)

    2011-03-01T23:59:59.000Z

    Generally, this invention relates to the development of field monitoring methodology for new substances and sensing chemical warfare agents (CWAs) and terrorist substances. It also relates to a portable test kit which may be utilized to measure concentrations of halogenated volatile organic compounds (VOCs) in the field. Specifically it relates to systems for reliably field sensing the potential presence of such items while also distinguishing them from other elements potentially present. It also relates to overall systems and processes for sensing, reacting, and responding to an indicated presence of such substance, including modifications of existing halogenated sensors and arrayed sensing systems and methods.

  10. String-Organized Field Theory

    E-Print Network [OSTI]

    C. S. Lam

    1994-06-24T23:59:59.000Z

    A low energy string theory should reduce to an ordinary quantum field theory, but in reality the structures of the two are so different as to make the equivalence obscure. The string formalism is more symmetrical between the spacetime and the internal degrees of freedom, thus resulting in considerable simplification in practical calculations and novel insights in theoretical understandings. We review here how tree or multiloop field-theoretical diagrams can be organized in a string-like manner to take advantage of this computational and conceptual simplicity.

  11. Department of Energy Idaho - Organization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisitingContract Management FermiDavid Turner David3 |AProgramLinks >Organization

  12. Organization | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeeding access toTest andOptimize carbon About »Organization NETL:

  13. Low band gap polymers Organic Photovoltaics

    E-Print Network [OSTI]

    Low band gap polymers for Organic Photovoltaics Eva Bundgaard Ph.D. Dissertation Ris National Bundgaard Title: Low band gap polymers for Organic photovoltaics Department: The polymer department Report the area of organic photovoltaics are focusing on low band gap polymers, a type of polymer which absorbs

  14. 5, 11391174, 2008 Organic carbon and

    E-Print Network [OSTI]

    Boyer, Edmond

    BGD 5, 11391174, 2008 Organic carbon and nutrient export from disturbed peatlands S. Waldron et al of Biogeosciences The significance of organic carbon and nutrient export from peatland-dominated landscapes subject Union. 1139 #12;BGD 5, 11391174, 2008 Organic carbon and nutrient export from disturbed peatlands S

  15. 6, 42134249, 2006 Organic aerosols in

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    ACPD 6, 42134249, 2006 Organic aerosols in the Northeastern Pacific K. K. Crahan et al. Title Page Chemistry and Physics Discussions Organics in the Northeastern Pacific and their impacts on aerosol Organic aerosols in the Northeastern Pacific K. K. Crahan et al. Title Page Abstract Introduction

  16. Quantitative organic vapor-particle sampler

    DOE Patents [OSTI]

    Gundel, Lara (Berkeley, CA); Daisey, Joan M. (Walnut Creek, CA); Stevens, Robert K. (Cary, NC)

    1998-01-01T23:59:59.000Z

    A quantitative organic vapor-particle sampler for sampling semi-volatile organic gases and particulate components. A semi-volatile organic reversible gas sorbent macroreticular resin agglomerates of randomly packed microspheres with the continuous porous structure of particles ranging in size between 0.05-10 .mu.m for use in an integrated diffusion vapor-particle sampler.

  17. When Function Follows Form: Plastic Solar Cells | ANSER Center...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    When Function Follows Form: Plastic Solar Cells Home > Research > ANSER Research Highlights > When Function Follows Form: Plastic Solar Cells...

  18. Waste Form Degradation Model Integration for Engineered Materials...

    Office of Environmental Management (EM)

    Waste Form Degradation Model Integration for Engineered Materials Performance Waste Form Degradation Model Integration for Engineered Materials Performance The collaborative...

  19. Build, Own, Operate and Maintain (BOOM) Boiler Systems

    E-Print Network [OSTI]

    Henry, T.

    that does not require capital investment. Option: Develop a partnership with an Energy Service Company (ESCO) and lending institution designed to "off-load" all utility system generation, delivery, operation and maintenance. In many cases extend... corporations, colleges and universities. Issues: To remain competitive and provide for growth, corporations and not-for-profit (NFP) organizations have changed the way they look at their energy systems: ? They are only allocating capital to "core" assets...

  20. Forming aspheric optics by controlled deposition

    DOE Patents [OSTI]

    Hawryluk, Andrew M. (Modesto, CA)

    1998-01-01T23:59:59.000Z

    An aspheric optical element formed by depositing material onto a spherical surface of an optical element by controlled deposition to form an aspheric surface of desired shape. A reflecting surface, single or multi-layer, can then be formed on the aspheric surface by evaporative or sputtering techniques. Aspheric optical elements are suitable for deep ultra-violet (UV) and x-ray wavelengths. The reflecting surface may, for example, be a thin (.about.100 nm) layer of aluminum, or in some cases the deposited modifying layer may function as the reflecting surface. For certain applications, multi-layer reflective surfaces may be utilized, such as chromium-carbon or tungsten-carbon multi-layer, with the number of layers and thickness being determined by the intended application.

  1. The Alternative Form of Fermat's Equation

    E-Print Network [OSTI]

    Anatoly A. Grinberg

    2014-09-25T23:59:59.000Z

    An alternative form of Fermats equation[1] is proposed. It represents a portion of the identity that includes three terms of Fermats original equation. This alternative form permits an elementary and compact proof of the first case of Fermats Theorem (FT) for a number of specific exponents. Proofs are given for exponents n equal to 3, 5, 7,11 and 13. All these cases have already been proven using the original Fermats equation, not to mention the fact that a complete proof of FT was given by A. Wiles [2]. In view of this, the results presented here carry a purely methodological interest. They illustrate the effectiveness and simplicity of the method,compared with the well-known classical approach. An alternative form of the equation permits use of the criterion of the incompatibility of its terms, avoiding the labor-intensive and sophisticated calculations associated with traditional approach.

  2. Method of forming an HTS article

    DOE Patents [OSTI]

    Bhattacharya, Raghu N.; Zhang, Xun; Selvamanickam, Venkat

    2014-08-19T23:59:59.000Z

    A method of forming a superconducting article includes providing a substrate tape, forming a superconducting layer overlying the substrate tape, and depositing a capping layer overlying the superconducting layer. The capping layer includes a noble metal and has a thickness not greater than about 1.0 micron. The method further includes electrodepositing a stabilizer layer overlying the capping layer using a solution that is non-reactive to the superconducting layer. The superconducting layer has an as-formed critical current I.sub.C(AF) and a post-stabilized critical current I.sub.C(PS). The I.sub.C(PS) is at least about 95% of the I.sub.C(AF).

  3. Hadronic form factors in kaon photoproduction

    SciTech Connect (OSTI)

    Syukurilla, L., E-mail: tmart@fisika.ui.ac.id; Mart, T., E-mail: tmart@fisika.ui.ac.id [Department Fisika, FMIPA, Universitas Indonesia, Depok, 164242 (Indonesia)

    2014-09-25T23:59:59.000Z

    We have revisited the effect of hadronic form factors in kaon photoproduction process by utilizing an isobaric model developed for kaon photoproduction off the proton. The model is able to reproduce the available experimental data nicely as well as to reveal the origin of the second peak in the total cross section, which was the main source of confusion for decades. Different from our previous study, in the present work we explore the possibility of using different hadronic form factors in each of the K?N vertices. The use of different hadronic form factors, e.g. dipole, Gaussian, and generalized dipole, has been found to produce a more flexible isobar model, which can provide a significant improvement in the model.

  4. Apparatus for sensing volatile organic chemicals in fluids

    DOE Patents [OSTI]

    Hughes, Robert C.; Manginell, Ronald P.; Jenkins, Mark W.; Kottenstette, Richard; Patel, Sanjay V.

    2005-06-07T23:59:59.000Z

    A chemical-sensing apparatus is formed from the combination of a chemical preconcentrator which sorbs and concentrates particular volatile organic chemicals (VOCs) and one or more chemiresistors that sense the VOCs after the preconcentrator has been triggered to release them in concentrated form. Use of the preconcentrator and chemiresistor(s) in combination allows the VOCs to be detected at lower concentration than would be possible using the chemiresistor(s) alone and further allows measurements to be made in a variety of fluids, including liquids (e.g. groundwater). Additionally, the apparatus provides a new mode of operation for sensing VOCs based on the measurement of decay time constants, and a method for background correction to improve measurement precision.

  5. High temperature methods for forming oxidizer fuel

    DOE Patents [OSTI]

    Bravo, Jose Luis (Houston, TX)

    2011-01-11T23:59:59.000Z

    A method of treating a formation fluid includes providing formation fluid from a subsurface in situ heat treatment process. The formation fluid is separated to produce a liquid stream and a first gas stream. The first gas stream includes carbon dioxide, hydrogen sulfide, hydrocarbons, hydrogen or mixtures thereof. Molecular oxygen is separated from air to form a molecular oxygen stream comprising molecular oxygen. The first gas stream is combined with the molecular oxygen stream to form a combined stream comprising molecular oxygen and the first gas stream. The combined stream is provided to one or more downhole burners.

  6. Lorentz Coherence and the Proton Form Factor

    E-Print Network [OSTI]

    Kim, Young S

    2015-01-01T23:59:59.000Z

    The dipole cutoff behavior for the proton form factor has been and still is one of the major issues in high-energy physics. It is shown that this dipole behavior comes from the coherence between the Lorentz contraction of the proton size and the decreasing wavelength of the incoming photon signal. The contraction rates are the same for both cases. This form of coherence is studied also in the momentum-energy space. The coherence effect in this space can be explained in terms of two overlapping wave functions.

  7. Lorentz Coherence and the Proton Form Factor

    E-Print Network [OSTI]

    Young S. Kim

    2015-02-28T23:59:59.000Z

    The dipole cutoff behavior for the proton form factor has been and still is one of the major issues in high-energy physics. It is shown that this dipole behavior comes from the coherence between the Lorentz contraction of the proton size and the decreasing wavelength of the incoming photon signal. The contraction rates are the same for both cases. This form of coherence is studied also in the momentum-energy space. The coherence effect in this space can be explained in terms of two overlapping wave functions.

  8. Research Form | Photosynthetic Antenna Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Technical s o Freiberge s 3 % A PB 2 7 7Research Form Research Form

  9. Directory of energy data collection forms: Forms in use as of October 1994

    SciTech Connect (OSTI)

    Not Available

    1994-12-15T23:59:59.000Z

    This 18th edition directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry; selected public use forms currently used as basic energy information gathering tools by DOE are covered. For each form, an abstract is included that describes the form`s uses, its respondents, and the data collected. Also shown are frequently requested items: energy sources and functions covered by the form, general categories of respondents, collection frequency, public laws and regulations, reporting requirement, name and phone number of the data collection manager, and the publications resulting from the data collection. Indexes, arranged according to energy source/function, publications, respondent categories, former EIA form number designations, and collection authorities, are provided.

  10. Hydrogen Storage in Metal-Organic Frameworks

    SciTech Connect (OSTI)

    Omar M. Yaghi

    2012-04-26T23:59:59.000Z

    Conventional storage of large amounts of hydrogen in its molecular form is difficult and expensive because it requires employing either extremely high pressure gas or very low temperature liquid. Because of the importance of hydrogen as a fuel, the DOE has set system targets for hydrogen storage of gravimetric (5.5 wt%) and volumetric (40 g L-1) densities to be achieved by 2015. Given that these are system goals, a practical material will need to have higher capacity when the weight of the tank and associated cooling or regeneration system is considered. The size and weight of these components will vary substantially depending on whether the material operates by a chemisorption or physisorption mechanism. In the latter case, metal-organic frameworks (MOFs) have recently been identified as promising adsorbents for hydrogen storage, although little data is available for their sorption behavior. This grant was focused on the study of MOFs with these specific objectives. (1) To examine the effects of functionalization, catenation, and variation of the metal oxide and organic linkers on the low-pressure hydrogen adsorption properties of MOFs. (2) To develop a strategy for producing MOFs with high surface area and porosity to reduce the dead space and increase the hydrogen storage capacity per unit volume. (3) To functionalize MOFs by post synthetic functionalization with metals to improve the adsorption enthalpy of hydrogen for the room temperature hydrogen storage. This effort demonstrated the importance of open metal sites to improve the adsorption enthalpy by the systematic study, and this is also the origin of the new strategy, which termed isoreticular functionalization and metalation. However, a large pore volume is still a prerequisite feature. Based on our principle to design highly porous MOFs, guest-free MOFs with ultrahigh porosity have been experimentally synthesized. MOF-210, whose BET surface area is 6240 m2 g-1 (the highest among porous solids), takes up 15 wt% of total H2 uptake at 80 bar and 77 K. More importantly, the total H2 uptake by MOF-210 was 2.7 wt% at 80 bar and 298 K, which is the highest number reported for physisorptive materials.

  11. An Assessment of Lattice Energy Minimization for the Prediction of Molecular Organic Crystal Structures

    E-Print Network [OSTI]

    de Gispert, Adri

    An Assessment of Lattice Energy Minimization for the Prediction of Molecular Organic Crystal Received August 18, 2004 ABSTRACT: Lattice energy searches for theoretical low-energy crystal forms with respect to the global minimum energy structure, and we determine the number of unobserved structures lower

  12. Entropically Driven Partitioning of Ethylene Oxide Oligomers and Polymers in Aqueous/ Organic Biphasic Systems

    E-Print Network [OSTI]

    Loh, Watson

    Entropically Driven Partitioning of Ethylene Oxide Oligomers and Polymers in Aqueous/ Organic; In Final Form: June 19, 2002 Partitioning of ethylene oxide oligomers and polymers (PEO) in biphasic unit, smaller than hydration numbers reported in aqueous solutions. All of these findings lead

  13. Storage of Hydrogen, Methane, and Carbon Dioxide in Highly Porous Covalent Organic Frameworks for Clean Energy

    E-Print Network [OSTI]

    Yaghi, Omar M.

    Storage of Hydrogen, Methane, and Carbon Dioxide in Highly Porous Covalent Organic Frameworks, and carbon dioxide isotherm measurements were performed at 1-85 bar and 77-298 K on the evacuated forms for COF-5, 65 mg g-1 for COF-6, 87 mg g-1 for COF-8, and 80 mg g-1 for COF-10; carbon dioxide at 298 K

  14. Elucidating secondary organic aerosol from diesel and gasoline vehicles through detailed characterization of

    E-Print Network [OSTI]

    Silver, Whendee

    Elucidating secondary organic aerosol from diesel and gasoline vehicles through detailed 19, 2012 (received for review July 22, 2012) Emissions from gasoline and diesel vehicles and diesel vehicles, and find diesel exhaust is seven times more efficient at forming aerosol than gasoline

  15. Fracturing controlled primary migration of hydrocarbon fluids during1 heating of organic-rich shales2

    E-Print Network [OSTI]

    understand primary migration of16 hydrocarbon fluids in very low permeability source rock. Cracks nucleate.e. the transport of hydrocarbon fluids from extremely low39 permeability source rocks in which they are generated the source rock is42 formed is buried, the organic material is transformed into complex high molecular weight

  16. Ubiquity and dominance of oxygenated species in organic aerosols in anthropogenically-influenced Northern Hemisphere midlatitudes

    E-Print Network [OSTI]

    Jimenez, Jose-Luis

    ) components. HOA has been linked to primary combustion emissions (mainly from fossil fuel) and other primary techniques, and the minor fraction ($10%) of the OA mass that can typically be speciated by conventional]. Also primary organic aerosol (POA) formed by fossil fuel combustion can be overestimated

  17. Interactions between diatom aggregates, minerals, particulate organic carbon, and dissolved organic matter: Further

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Interactions between diatom aggregates, minerals, particulate organic carbon, and dissolved organic October 2008. [1] Correlations of particulate organic carbon (POC) and mineral fluxes into sediment traps in the deep sea have previously suggested that interactions between organic matter and minerals play a key

  18. Figure 2a. Common forms of plants. Division of Agricultural Sciences and Natural Resources Oklahoma State University

    E-Print Network [OSTI]

    Balasundaram, Balabhaskar "Baski"

    Figure 2a. Common forms of plants. Division of Agricultural Sciences and Natural Resources and organizing plants and hardscape elements in the landscape. Mass Mass describes the space or area occupied by an object. Your house as well as the structures and plantings in a land- scape all have mass, as do

  19. Water in a Crowd In many situations, form biology to geology, water occurs not as the pure bulk

    E-Print Network [OSTI]

    Fayer, Michael D.

    Water in a Crowd In many situations, form biology to geology, water occurs not as the pure bulk species, and interacting with large organic molecules. In such situations, water does not behave in the same manner as it does in the pure bulk liquid. Water dynamics are fundamental to many processes

  20. Finance Division Employee Status Form Finance Division

    E-Print Network [OSTI]

    Crews, Stephen

    Finance Division Employee Status Form Finance Division CB 1225, 104 Airport Drive Chapel Hill, NC Phone: 919-962-7242 finance.unc.edu Failure to Follow Instructions Below Will Delay Processing Today information in five areas: 1. Division-wide emergency call tree 2. Finance Web site contacts 3. Departmental

  1. Technetium Waste Form Development Progress Report

    SciTech Connect (OSTI)

    Buck, Edgar C.

    2010-02-26T23:59:59.000Z

    The approach being followed to evaluate the use of an iron-based alloy waste form to immobilize the Tc-bearing waste streams generated during the aqueous and electrochemical processing of used fuel that is being studied in the DOE Advanced Fuel Cycle Initiative (AFCI) is presented in this report. The objective is to develop an alloy waste form that provides high waste loading within waste form processing limitations, meets waste form performance requirements for durability and the long-term retention of radionuclides, and can be produced with consistent physical, chemical, and radiological properties that meet regulatory acceptance requirements for disposal. Microanalysis using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) was used to analyze non-radioactive Fe-Mo-Re samples. A sample was prepared for SEM; however, significant unforeseen instrument problems led to delays in conducting the detailed work. The TEM was not available for this particular sample and therefore only preliminary SEM work can be reported. The results are in agreement with previous studies [Ebert 2009]; however, a rhenium-rich region within the Re-Mo phase is clearly visible.

  2. Honors Physics 161L Enrollment Approval Form

    E-Print Network [OSTI]

    Wang, Hai

    Honors Physics 161L Enrollment Approval Form Last Name First Name USC ID Number Major Class (FR, SO Math: Score: ______ SAT Math Score: __________ AP Physics C: Score: ______ ACT Composite: __________ IB Physics: Score: Any other AP or IB, or college level, science or math courses and scores (if applicable

  3. Forming foam structures with carbon foam substrates

    DOE Patents [OSTI]

    Landingham, Richard L.; Satcher, Jr., Joe H.; Coronado, Paul R.; Baumann, Theodore F.

    2012-11-06T23:59:59.000Z

    The invention provides foams of desired cell sizes formed from metal or ceramic materials that coat the surfaces of carbon foams which are subsequently removed. For example, metal is located over a sol-gel foam monolith. The metal is melted to produce a metal/sol-gel composition. The sol-gel foam monolith is removed, leaving a metal foam.

  4. Manifold free multiple sheet superplastic forming

    DOE Patents [OSTI]

    Elmer, John W.; Bridges, Robert L.

    2004-01-13T23:59:59.000Z

    Fluid-forming compositions in a container attached to enclosed adjacent sheets are heated to relatively high temperatures to generate fluids (gases) that effect inflation of the sheets. Fluid rates to the enclosed space between the sheets can be regulated by the canal from the container. Inflated articles can be produced by a continuous, rather than batch-type, process.

  5. Manifold free multiple sheet superplastic forming

    DOE Patents [OSTI]

    Elmer, John W. (Danville, CA); Bridges, Robert L. (Knoxville, TN)

    2001-01-01T23:59:59.000Z

    Fluid-forming compositions in a container attached to enclosed adjacent sheets are heated to relatively high temperatures to generate fluids (gases) that effect inflation of the sheets. Fluid rates to the enclosed space between the sheets can be regulated by the canal from the container. Inflated articles can be produced by a continuous, rather than batch-type, process.

  6. FIRE WATCH FORM University Fire Marshal

    E-Print Network [OSTI]

    Pawlowski, Wojtek

    FIRE WATCH FORM University Fire Marshal Guidance Document Approved by: R. Flynn Last revised by: R. These are regulations used by the University Fire Marshal and EH&S as guidance to meet compliance pertaining the impairment coordinator (The University Fire Marshal has been identified as the Impairment Coordinator for all

  7. The first stars: Where did they form?

    E-Print Network [OSTI]

    Jordi Miralda-Escude

    1999-12-15T23:59:59.000Z

    Several emerging links between high-redshift observational cosmology and the Galactic fossil evidence found in the kinematics, metallicities and ages of Milky Way stars are discussed. In a flat Cold Dark Matter model with $\\Omega\\simeq 0.3$ that agrees with present large-scale structure observations, the oldest stars in the Milky Way should have formed in the first halos where gas was able to cool, at $z\\simeq 20$. These earliest, weakly bound dwarf galaxies probably turned only a small fraction of their gas to stars, which should be metal-poor. However, the merging rate in the early universe was much faster than the present one, so massive halos with more efficient star formation and metallicities up to the highest values present today in the bulge could have formed less than $10^9$ years after the oldest stars. The mean metallicity produced in the universe by a given redshift is related to the mean surface brightness of star-forming galaxies above this redshift, and also to the reionization epoch if galaxies were the dominant sources of ionizing radiation. The biased distribution of the early dwarf galaxies where the first stars formed should result in an age gradient with radius of the low-metallicity stars in the Milky Way, with the oldest ones concentrated in the bulge and the youngest in the outer halo.

  8. REPLACEMENT DIPLOMA REQUEST FORM Dear Alumni

    E-Print Network [OSTI]

    Dennett, Daniel

    REPLACEMENT DIPLOMA REQUEST FORM Dear Alumni: It is our understanding that you need to replace your original diploma. We are glad to help you attain a replacement diploma. The items listed below are required replacement diploma. Please feel free to contact the LGBT Center at 617-627-3770 if you have questions

  9. Laser Worker Registration Form (LWRF) Surname: Forenames

    E-Print Network [OSTI]

    Martin, Ralph R.

    ABCDEFGHI Laser Worker Registration Form (LWRF) Surname: Forenames: School of: Ext No.: Email YY Class of Laser to be Used 1 1M 1E 2 2M 3R 3B 4 Work Location(s) Lab No. Laser Work Currently Undertaken Elsewhere Are you currently engaged in work elsewhere involving laser radiation? YES

  10. FACULTY OF ENGINEERING MODULE DESCRIPTION FORM

    E-Print Network [OSTI]

    Mottram, Nigel

    Office Jan 2003) #12;Level of Achievement Statement for a JBM Accredited Engineering Module Module CodeFACULTY OF ENGINEERING MODULE DESCRIPTION FORM CODE CL508/906 Site Investigation & Risk Assessment Module Registrar: Dr P Sentenac Taught To (Course): Civil Engineering Other Lecturers Involved: Credit

  11. FACULTY OF ENGINEERING MODULE DESCRIPTION FORM

    E-Print Network [OSTI]

    Mottram, Nigel

    Level: NQF 3 Prerequisites: none Module Format and Delivery (hours): Lecture Tutorial Assignments Visits visualisation). Uncovering the role of science and mathematics in the design of structures using case studyFACULTY OF ENGINEERING MODULE DESCRIPTION FORM CL 112 Introduction to Civil Engineering Module Code

  12. Environmental Studies Program Field Trip Approval Form

    E-Print Network [OSTI]

    . Transportation University Motor Pool Enterprise Rent-A-Car Charter Bus Private vehicle (Request to use Personal Vehicle and /or Transport Passengers form required) Are all drivers certified and insured? YES NO If no coordinator: Number of passengers (include drivers in number): Motor Pool desired vehicle(s): 12 passenger van

  13. Sustainable Energy Revolving Loan Fund CLOSEOUT FORM

    E-Print Network [OSTI]

    Escher, Christine

    Sustainable Energy Revolving Loan Fund CLOSEOUT FORM I. Project Information 1. Project Title 2. By signing Section V below, the OSU Student Sustainability Initiative accepts the Applicant's assertion No Other funding sources. Provide source name, fund, or index number. Exclude possible Energy Trust

  14. BRC FORM 203-1 (February 2002)

    E-Print Network [OSTI]

    Meagher, Mary

    BRC FORM 203-1 (February 2002) Texas Department of Health 1100 West 49th Street Austin, Texas 78756-3189 NOTICE TO EMPLOYEES TEXAS REGULATIONS FOR CONTROL OF RADIATION The Texas Department of Health has established standards for your protection against radiation hazards, in accordance with the Texas Radiation

  15. Texas Union Pizza Order Form ROOM RESERVED ______________________________________________________

    E-Print Network [OSTI]

    Jefferys, William

    : ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ Pick-up All orders are to be picked up at the Texas Union Hospitality Center desk in the south end West#12;#12;Texas Union Pizza Order Form ROOM RESERVED with the Texas Union Policies and Procedures. I understand that I will be held responsible for any debts incurred

  16. Checkout Form Verson 08-11

    E-Print Network [OSTI]

    Karsai, Istvan

    Early Transferring within ETSU from to Transferring within TBR from ETSU to ***Department head form may be completed. Financial Manager (94316) (http://www.etsu Access (idbucs@etsu.edu) CBORD Access (idbucs@etsu.edu) Date: PROCUREMENT Procard (94741) Travel Advances

  17. Banner Financial Aid Account Request Form

    E-Print Network [OSTI]

    Karsai, Istvan

    Banner Financial Aid Account Request Form ETSU Office of Information Technology 424 Roy Nicks Hall, Box 70728 Johnson City, Tennessee 37614 (423) 439-4648 oithelp@etsu.edu This section for use ______________________________________________________________________________________ [last] [first] [middle] ETSU Domain Name ____________________@etsu.edu School / College

  18. ID SYSTEM DEBIT ACCOUNT Payroll Deduction Form

    E-Print Network [OSTI]

    Karsai, Istvan

    ID SYSTEM DEBIT ACCOUNT Payroll Deduction Form This is my authorization for the ETSU Payroll Department to make a monthly deduction from my paycheck to be deposited to my ETSU ID System Debit Card 37614-0611 PHONE: 423/439-8316 http://www.etsu.edu/students/univcent/id.htm e-mail IDBUCS@etsu.edu #12;

  19. BRAZIL VISITING FELLOWSHIP SCHEME Application Form

    E-Print Network [OSTI]

    Birmingham, University of

    BRAZIL VISITING FELLOWSHIP SCHEME Application Form APPLICATIONS SHOULD BE TYPEWRITTEN AND BOXES of attendance Qualifications awarded and class of Honours, etc. Principal Subject(s) taken #12;BRAZIL VISITING): Date(s) From To To Nature of work and Position held Name and address of employer #12;BRAZIL VISITING

  20. School of Computer Science Information Disclosure Form

    E-Print Network [OSTI]

    Kourtzi, Zoe

    School of Computer Science Information Disclosure Form In order to comply with data protection laws, we must have your permission to display information about you on our web site. Please tick the boxes below to indicate which information you wish to be shown on the web site. Job title (senior lecturer etc

  1. Mentoring Agreement Form Printed Name of

    E-Print Network [OSTI]

    Edwards, Paul N.

    Mentoring Agreement Form Printed Name of Student Mentee Term of Graduation Student ID Date Student email address Signature of Mentee Printed Name of Faculty Mentor Signature of Faculty Mentor Students are responsible for requesting appointments with mentors at least once each semester

  2. 1 Revised November 2013 Mentor Request Form

    E-Print Network [OSTI]

    Martin, Jeff

    1 Revised November 2013 Mentor Request Form What is it? The University of Winnipeg Student Mentor of Winnipeg student or recent graduate (mentors). Mentees ask their mentor all sorts of questions about. Mentors do their best to answer questions and provide support to their mentee. Mentors help mentees

  3. Structure Functions, Form Factors, and Lattice QCD

    E-Print Network [OSTI]

    Walter Wilcox; B. Andersen-Pugh

    1993-12-07T23:59:59.000Z

    We present results towards the calculation of the pion electric form factor and structure function on a $16^3\\times 24$ lattice using charge overlap. By sacrificing Fourier transform information in two directions, it is seen that the longitudinal four point function can be extracted with reasonable error bars at low momentum.

  4. OUTSIDE EMPLOYMENT DISCLOSURE AND ACKNOWLEDGEMENT FORM

    E-Print Network [OSTI]

    Su, Xiao

    OUTSIDE EMPLOYMENT DISCLOSURE AND ACKNOWLEDGEMENT FORM Management Personal Plan (MPP) and Executive and executive employees with employment outside of the California State University are required to provide a written statement of all such employment to the appropriate administrator. Disclosure: Full Name: SJSU ID

  5. University of Alberta Library Release Form

    E-Print Network [OSTI]

    Alberta, University of

    University of Alberta Library Release Form Name of Author: Brett Poulin Title of Thesis: Sequence granted to the University of Alberta Library to reproduce sin- gle copies of this thesis and to lend techniques in the con- text of the high-throughput and automated classification task. A recently developed

  6. College of Charleston Employee Bonus Request Form

    E-Print Network [OSTI]

    Kasman, Alex

    College of Charleston Employee Bonus Request Form Choose the type of Bonus that applies: Standard employee bonus in accordance with State Bonus Proviso and Guidelines. Note: Employees may not receive more: State (cannot be used for bonuses issued under Faculty/Staff Award Plan) Federal Check to indicate

  7. The Library UBC LIBRARY CARD APPLICATION FORM

    E-Print Network [OSTI]

    Michelson, David G.

    The Library UBC LIBRARY CARD APPLICATION FORM For Faculty Authorized Users UBC FACULTY MEMBER to the following person so that s/he may borrow Library materials and access services in my name for my UBC September 15th , 2014 Faculty member's statement: I understand that this is a separate library card from my

  8. STUDENTS CROSSING BORDERS (SCB) COMMUNITY APPLICATION FORM

    E-Print Network [OSTI]

    Blanchette, Robert A.

    STUDENTS CROSSING BORDERS (SCB) COMMUNITY APPLICATION FORM The Students Crossing Borders community of Minnesota. This document is a supplemental application for the SCB community only. Current U of M Housing this application to: scb@umn.edu or Students Crossing Borders c/o Kevin Dostal Dauer Comstock Hall East 210

  9. Iodine chemical forms in LWR severe accidents

    SciTech Connect (OSTI)

    Beahm, E.C.; Weber, C.F.; Kress, T.S.; Parker, G.W.

    1991-01-01T23:59:59.000Z

    Calculated data from seven severe accident sequences in light-water reactor plants were used to assess the chemical forms of iodine in containment. In most of the calculations for the seven sequences, iodine entering containment from the reactor coolant system was almost entirely in the form of CsI with very small contributions of I or HI. The largest fraction of iodine in forms other than CsI was a total of 3.2% as I plus HI. Within the containment, the CsI will deposit onto walls and other surfaces, as well as in water pools, largely in the form of iodide (I{sup {minus}}). The radiation induced conversion of I{sup {minus}} in water pools into I{sub 2} is strongly dependent on pH. In systems where the pH was controlled above 7, little additional elemental iodine would be produced in the containment atmosphere. When the pH falls below 7, it may be assumed that it is not being controlled, and large fractions of iodine as I{sub 2} within the containment atmosphere may be produced. 16 refs.

  10. Methods for forming wellbores in heated formations

    DOE Patents [OSTI]

    Guimerans, Rosalvina Ramona; Mansure, Arthur James

    2012-09-25T23:59:59.000Z

    A method for forming a wellbore in a heated formation includes flowing liquid cooling fluid to a bottom hole assembly in a wellbore in a heated formation. At least a portion of the liquid cooling fluid is vaporized at or near a region to be cooled. Vaporizing the liquid cooling fluid absorbs heat from the region to be cooled.

  11. CC: Security, Residential Life Evacuation Assistance Form

    E-Print Network [OSTI]

    Cantlon, Jessica F.

    CC: Security, Residential Life Evacuation Assistance Form Voluntary Self-Identification If you have will be kept confidential and used only by Environmental Health and Safety, Residential Life (if applicable:_______________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ #12;CC: Security, Residential Life If this is a temporary request, please provide a date when

  12. THESIS/DISSERTATION ACCEPTANCE AND DEPOSIT FORM

    E-Print Network [OSTI]

    Mills, Allen P.

    THESIS/DISSERTATION ACCEPTANCE AND DEPOSIT FORM Name: Student ID: Future Employment: (ex.: Asst Spring Summer Year: Title of Thesis/Dissertation: I authorize the library of the University of California, Riverside to use or duplicate my thesis/dissertation whenever the University Library is approached

  13. Calcium Carbonate Storage in Amorphous Form and Its Template-Induced Crystallization

    SciTech Connect (OSTI)

    Han, T Y; Aizenberg, J

    2007-08-31T23:59:59.000Z

    Calcium carbonate crystallization in organisms often occurs through the transformation from the amorphous precursor. It is believed that the amorphous phase could be temporarily stabilized and stored, until its templated transition to the crystalline form is induced. Here we develop a bio-inspired crystallization strategy that is based on the above mechanism. Amorphous calcium carbonate (ACC) spherulitic particles are formed and stabilized on a self-assembled monolayer (SAM) of hydroxy-terminated alkanethiols on Au surface. The ACC is stored as a reservoir for ions and is induced to crystallize on command by introducing a secondary surface that is functionalized with carboxylic acid-terminated SAM. This secondary surface acts as a template for oriented and patterned nucleation. Various oriented crystalline arrays and micropatterned films are formed. We also show that the ACC phase can be doped with foreign ions (e.g. Mg) and organic molecules (e.g. dyes) and that these dopants later function as growth modifiers of calcite crystals and become incorporated into the crystals during the transformation process of ACC to calcite. We believe that our strategy opens the way of using a stabilized amorphous phase as a versatile reservoir system that can be converted in a highly controlled fashion to a crystalline form upon contacting the nucleating template.

  14. Nucleon and $?$ elastic and transition form factors

    E-Print Network [OSTI]

    Jorge Segovia; Ian C. Cloet; Craig D. Roberts; Sebastian M. Schmidt

    2014-09-03T23:59:59.000Z

    We compute nucleon and Delta elastic and transition form factors, and compare predictions made using a framework built upon a Faddeev equation kernel and interaction vertices that possess QCD-like momentum dependence with results obtained using a vector-vector contact-interaction. The comparison emphasises that experiment is sensitive to the momentum dependence of the running couplings and masses in the strong interaction sector of the Standard Model and highlights that the key to describing hadron properties is a veracious expression of dynamical chiral symmetry breaking in the bound-state problem. Amongst the results we describe, the following are of particular interest: $G_E^p(Q^2)/G_M^p(Q^2)$ possesses a zero at $Q^2=9.5GeV^2$; any change in the interaction which shifts a zero in the proton ratio to larger $Q^2$ relocates a zero in $G_E^n(Q^2)/G_M^n(Q^2)$ to smaller $Q^2$; and there is likely a value of momentum transfer above which $G_E^n>G_E^p$. Regarding the $\\Delta(1232)$-baryon, we find that, inter alia: the electric monopole form factor exhibits a zero; the electric quadrupole form factor is negative, large in magnitude, and sensitive to the nature and strength of correlations in the $\\Delta(1232)$ Faddeev amplitude; and the magnetic octupole form factor is negative so long as rest-frame P- and D-wave correlations are included. In connection with the N-to-Delta transition, the momentum-dependence of the magnetic transition form factor, $G_M^\\ast$, matches that of $G_M^n$ once the momentum transfer is high enough to pierce the meson-cloud; and the electric quadrupole ratio is a keen measure of diquark and orbital angular momentum correlations.

  15. Combined Waste Form Cost Trade Study

    SciTech Connect (OSTI)

    Dirk Gombert; Steve Piet; Timothy Trickel; Joe Carter; John Vienna; Bill Ebert; Gretchen Matthern

    2008-11-01T23:59:59.000Z

    A new generation of aqueous nuclear fuel reprocessing, now in development under the auspices of the DOE Office of Nuclear Energy (NE), separates fuel into several fractions, thereby partitioning the wastes into groups of common chemistry. This technology advance enables development of waste management strategies that were not conceivable with simple PUREX reprocessing. Conventional wisdom suggests minimizing high level waste (HLW) volume is desirable, but logical extrapolation of this concept suggests that at some point the cost of reducing volume further will reach a point of diminishing return and may cease to be cost-effective. This report summarizes an evaluation considering three groupings of wastes in terms of cost-benefit for the reprocessing system. Internationally, the typical waste form for HLW from the PUREX process is borosilicate glass containing waste elements as oxides. Unfortunately several fission products (primarily Mo and the noble metals Ru, Rh, Pd) have limited solubility in glass, yielding relatively low waste loading, producing more glass, and greater disposal costs. Advanced separations allow matching the waste form to waste stream chemistry, allowing the disposal system to achieve more optimum waste loading with improved performance. Metals can be segregated from oxides and each can be stabilized in forms to minimize the HLW volume for repository disposal. Thus, a more efficient waste management system making the most effective use of advanced waste forms and disposal design for each waste is enabled by advanced separations and how the waste streams are combined. This trade-study was designed to juxtapose a combined waste form baseline waste treatment scheme with two options and to evaluate the cost-benefit using available data from the conceptual design studies supported by DOE-NE.

  16. Structure-Function Relationships in Semiconducting Polymers for Organic Photovoltaics

    E-Print Network [OSTI]

    Kavulak, David Fredric Joel

    2010-01-01T23:59:59.000Z

    properties for organic photovoltaics (OPVs). Space-chargePolymers for Organic Photovoltaics By David Fredric JoelPolymers for Organic Photovoltaics by David Fredric Joel

  17. Morphology of Mixed Primary and Secondary Organic Particles and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Mixed Primary and Secondary Organic Particles and the Adsorption of Spectator Organic Gases during Aerosol Morphology of Mixed Primary and Secondary Organic Particles and the...

  18. Amorphous Molecular Organic Solids for Gas Adsorption. | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Molecular Organic Solids for Gas Adsorption. Amorphous Molecular Organic Solids for Gas Adsorption. Abstract: We show that molecular organic compounds with large accessible...

  19. Conjugated Polymer Design and Engineering for Organic Electronics

    E-Print Network [OSTI]

    Woo, Claire Hoi Kar

    2011-01-01T23:59:59.000Z

    W. ; Forrest, S. R. Organic Electronics 2003, 4, 77-87. (24)Aspects of Organic Electronics: From Fundamentals toof solution-processed organic electronics rapidly advancing,

  20. Charge-carrier transport in amorphous organic semiconductors

    E-Print Network [OSTI]

    Limketkai, Benjie, 1982-

    2008-01-01T23:59:59.000Z

    Since the first reports of efficient luminescence and absorption in organic semiconductors, organic light-emitting devices (OLEDs) and photovoltaics (OPVs) have attracted increasing interest. Organic semiconductors have ...