Sample records for northeast reliability interconnect

  1. Reliability of Electrical Interconnects (Presentation)

    SciTech Connect (OSTI)

    Devoto, D.

    2014-06-01T23:59:59.000Z

    This presentation discusses the status of NREL's research on the reliability of electrical interconnects.

  2. Reliability assessment of autonomous power systems incorporating HVDC interconnection links

    SciTech Connect (OSTI)

    Dialynas, E.N.; Koskolos, N.C. [National Technical Univ., Athens (Greece). Dept. of Electrical and Computer Engineering] [National Technical Univ., Athens (Greece). Dept. of Electrical and Computer Engineering; Agoris, D. [Public Power Corp., Athens (Greece)] [Public Power Corp., Athens (Greece)

    1996-01-01T23:59:59.000Z

    The objective of this paper is to present an improved computational method for the overall reliability assessment of autonomous power systems that may or may not contain HVdc interconnection links. This is a hybrid method based on a Monte-Carlo simulation sequential approach which incorporates an analytical approach for the reliability modeling of the HVdc transmission links. The developed models and techniques have been implemented into a computer program that can be used to simulate the operational practices and characteristics of the overall system under study efficiently and realistically. A set of reliability indices are calculated for each load-point of interest and the entire system while a set of additional indices is calculated for quantifying the reliability performance of the interconnection links under the specified operating requirements. The analysis of a practical system is also included for a number of studies representing its various operating and design characteristics.

  3. Chip-Level Electromigration Reliability for Cu Interconnects

    SciTech Connect (OSTI)

    Gall, M.; Oh, C.; Grinshpon, A.; Zolotov, V.; Panda, R.; Demircan, E.; Mueller, J.; Justison, P.; Ramakrishna, K.; Thrasher, S.; Hernandez, R.; Herrick, M.; Fox, R.; Boeck, B.; Kawasaki, H. [Technology Solutions Organization, Freescale Semiconductor (United States); Haznedar, H.; Ku, P. [Sector Quality, Freescale Semiconductor (United States)

    2004-12-08T23:59:59.000Z

    Even after the successful introduction of Cu-based metallization, the electromigration (EM) failure risk has remained one of the most important reliability concerns for most advanced process technologies. Ever increasing operating current densities and the introduction of low-k materials in the backend process scheme are some of the issues that threaten reliable, long-term operation at elevated temperatures. The traditional method of verifying EM reliability only through current density limit checks is proving to be inadequate in general, or quite expensive at the best. A Statistical EM Budgeting (SEB) methodology has been proposed to assess more realistic chip-level EM reliability from the complex statistical distribution of currents in a chip. To be valuable, this approach requires accurate estimation of currents for all interconnect segments in a chip. However, no efficient technique to manage the complexity of such a task for very large chip designs is known. We present an efficient method to estimate currents exhaustively for all interconnects in a chip. The proposed method uses pre-characterization of cells and macros, and steps to identify and filter out symmetrically bi-directional interconnects. We illustrate the strength of the proposed approach using a high-performance microprocessor design for embedded applications as a case study.

  4. Reliability of Nano-Structured Nickel Interconnections Replacing FlipChip Solder Assembly without Underfill

    E-Print Network [OSTI]

    Swaminathan, Madhavan

    Reliability of Nano-Structured Nickel Interconnections Replacing FlipChip Solder Assembly without nano-structured nickel as the primary interconnection material. Assembly was accomplished materials such as nanostructured copper and nickel, novel bonding and barrier layers to provide both

  5. Reliability of the generation supply in an interconnected power system

    E-Print Network [OSTI]

    Holditch, Damon Will

    1967-01-01T23:59:59.000Z

    method of calculating generation supply reliability was first described by Calabrese. This method has been expanded and refined by numerous other authors. The reliability figure of meri. t usually calculated using Calabrese's method is called loss...

  6. Reliability of Wireless On-Chip Interconnects Based on Carbon Nanotube Antennas

    E-Print Network [OSTI]

    Pande, Partha Pratim

    Reliability of Wireless On-Chip Interconnects Based on Carbon Nanotube Antennas A. Nojeh1 , P Engineering University of British Columbia 2332 Main Mall Vancouver, BC, Canada 2 School of Electrical of the research effort in the emerging area of nanoelectronics has revolved around creating novel devices

  7. Cut set-based risk and reliability analysis for arbitrarily interconnected networks

    DOE Patents [OSTI]

    Wyss, Gregory D. (Albuquerque, NM)

    2000-01-01T23:59:59.000Z

    Method for computing all-terminal reliability for arbitrarily interconnected networks such as the United States public switched telephone network. The method includes an efficient search algorithm to generate minimal cut sets for nonhierarchical networks directly from the network connectivity diagram. Efficiency of the search algorithm stems in part from its basis on only link failures. The method also includes a novel quantification scheme that likewise reduces computational effort associated with assessing network reliability based on traditional risk importance measures. Vast reductions in computational effort are realized since combinatorial expansion and subsequent Boolean reduction steps are eliminated through analysis of network segmentations using a technique of assuming node failures to occur on only one side of a break in the network, and repeating the technique for all minimal cut sets generated with the search algorithm. The method functions equally well for planar and non-planar networks.

  8. Interconnect Issues in NE

    Broader source: Energy.gov [DOE]

    Presentation covers interconnect issues in the Northeast and is given at the Spring 2010 Federal Utility Partnership Working Group (FUPWG) meeting in Providence, Rhode Island.

  9. A continuous distribution method for reliability evaluation of interconnected power systems 

    E-Print Network [OSTI]

    Chintaluri, Gouri Mohana

    1993-01-01T23:59:59.000Z

    the interconnection effects. Several studies are reported using IEEE-RTS and EPRI System E. The indices of LOLE, EUE and LOLF are obtained and are compared with those of the recursive method for accuracy and efficiency....

  10. Reliable low latency I/O in torus-based interconnection networks

    E-Print Network [OSTI]

    Azeez, Babatunde

    2007-04-25T23:59:59.000Z

    In today's high performance computing environment I/O remains the main bottleneck in achieving the optimal performance expected of the ever improving processor and memory technologies. Interconnection networks therefore combines processing units...

  11. A continuous distribution method for reliability evaluation of interconnected power systems

    E-Print Network [OSTI]

    Chintaluri, Gouri Mohana

    1993-01-01T23:59:59.000Z

    the interconnection effects. Several studies are reported using IEEE-RTS and EPRI System E. The indices of LOLE, EUE and LOLF are obtained and are compared with those of the recursive method for accuracy and efficiency....

  12. Reliable low latency I/O in torus-based interconnection networks 

    E-Print Network [OSTI]

    Azeez, Babatunde

    2007-04-25T23:59:59.000Z

    In today's high performance computing environment I/O remains the main bottleneck in achieving the optimal performance expected of the ever improving processor and memory technologies. Interconnection networks therefore combines processing units...

  13. Reliability of Electrical Interconnects

    Broader source: Energy.gov [DOE]

    2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  14. Interconnection Panel

    Broader source: Energy.gov [DOE]

    Presentation—given at at the Fall 2012 Federal Utility Partnership Working Group (FUPWG) meeting—discusses the interconnection panel, including an overview of the generation interconnection process (GIP), and interconnection agreements and their terms.

  15. Interconnection Standards

    Broader source: Energy.gov [DOE]

    The interconnection standards approved by the PUC also updated Nevada's net-metering policy, originally enacted in 1997. Previously, Nevada Revised Statute 704.774 addressed basic interconnection...

  16. Interconnection Standards

    Broader source: Energy.gov [DOE]

    In November 2005, the Indiana Utility Regulatory Commission (IURC) approved rules governing the interconnection of distributed generation (DG). Indiana's interconnection rules require the state's...

  17. Interconnection Standards

    Broader source: Energy.gov [DOE]

    New York first adopted uniform interconnection standards in 1999 (see history below). The Standard Interconnection Requirements (SIR) have subsequently been amended several times since, most...

  18. Interconnection Standards

    Broader source: Energy.gov [DOE]

    Utah’s interconnection rules are based on the Federal Energy Regulatory Commission’s (FERC) interconnection standards for small generators, adopted in May 2005 by FERC Order 2006. Utah's rules for...

  19. Interconnection Standards

    Broader source: Energy.gov [DOE]

    Different rules govern the interconnection of distributed generation facilities in Iowa, depending on whether or not the interconnection is with a utility whose rates are regulated by the Iowa...

  20. Interconnection Standards

    Broader source: Energy.gov [DOE]

    West Virginia's interconnection standards include two levels of review. The qualifications and application fees for each level are as follows:...

  1. Frequency Instability Problems in North American Interconnections

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    cycle CFC Constant frequency control CPS Control Performance Standards DC Direct Current EI Eastern Interconnection EIA Energy Information Agency ERCOT Electric Reliability...

  2. Interconnection Standards

    Broader source: Energy.gov [DOE]

    The Iowa Utilities Board (IUB) adopted rules for utilities in May 2010 for the interconnection of distributed generation facilities in Iowa.

  3. Interconnection Guidelines

    Broader source: Energy.gov [DOE]

    The Missouri Public Service Commission (PSC) adopted administrative rules for investor-owned utilities that included simplified interconnection standards, and electric cooperatives and municipal ...

  4. Interconnection Guidelines

    Broader source: Energy.gov [DOE]

    Interconnected customers must comply with all relevant national standards, including those established by the Institute of Electrical and Electronic Engineers (IEEE), Underwriters Laboratories (U...

  5. Interconnection Standards

    Broader source: Energy.gov [DOE]

    New Jersey's interconnection standards apply statewide to all electric distribution utilities, but not to the small number of municipal utilities and electric cooperatives in the state. The rules,...

  6. Interconnection Standards

    Broader source: Energy.gov [DOE]

    Virginia has two interconnection standards: one for net-metered systems and one for systems that are not net-metered.

  7. Interconnection Standards

    Broader source: Energy.gov [DOE]

    In December 2005, the Colorado Public Utilities Commission (PUC) adopted standards for net metering and interconnection, as required by Amendment 37, a renewable-energy ballot initiative approved...

  8. Interconnection Guidelines

    Broader source: Energy.gov [DOE]

    The South Carolina Public Service Commission (PSC) adopted simplified interconnection guidelines for small distributed generation (DG) in December 2006. These guidelines address renewable-energy...

  9. Interconnection Standards

    Broader source: Energy.gov [DOE]

    In April 2008, Kentucky enacted legislation which required the Kentucky Public Service Commission (PSC) to develop interconnection and net metering guidelines for all retail electric suppliers...

  10. Interconnection Standards

    Broader source: Energy.gov [DOE]

    In September 2007, the Washington Utilities and Transportation Commission (UTC) adopted interconnection standards for distributed generation (DG) systems up to 20 megawatts (MW) in capacity. The...

  11. Interconnection Standards

    Broader source: Energy.gov [DOE]

    The North Carolina Utilities Commission (NCUC) adopted comprehensive interconnection standards for distributed generation in June 2008. The NCUC standards, which are similar to the Federal Energy...

  12. Interconnection Standards

    Broader source: Energy.gov [DOE]

    The Maine Public Utility Commission (PUC) adopted interconnection procedures in January 2010. These rules apply to all transmission and distribution utilities operating in the state and apply to...

  13. Interconnection Standards

    Broader source: Energy.gov [DOE]

    In July 2006 the District of Columbia Public Service Commission (PSC) initiated a formal inquiry into the development of uniform interconnection procedures for on-site distributed generation...

  14. Interconnection Standards

    Broader source: Energy.gov [DOE]

    The Michigan Public Service Commission (PSC) first adopted interconnection standards for distributed generation (DG) in September 2003. The original standards provided for 5 levels of...

  15. Interconnection Standards

    Broader source: Energy.gov [DOE]

    The Pennsylvania Public Utilities Commission was required to adopt interconnection standards and net-metering rules by the Alternative Energy Portfolio Standards Act of 2004.The PUC subsequently...

  16. Interconnection Standards

    Broader source: Energy.gov [DOE]

    In December 2007, the Connecticut Department of Public Utility Control (DPUC) now called the Public Utilities Regulatory Authority (PURA) approved new interconnection guidelines for distributed...

  17. Interconnection Guidelines

    Broader source: Energy.gov [DOE]

    Wyoming's net-metering law includes basic interconnection requirements for systems up to 25 kilowatts (kW) in capacity that generate electricity using solar, wind, hydropower or biomass resources....

  18. Interconnection Guidelines

    Broader source: Energy.gov [DOE]

    The interconnection guidelines state that the utility can require a customer to have liability insurance, if the insurance is easily available at a reasonable cost to the customer.  No external...

  19. Interconnection Standards

    Broader source: Energy.gov [DOE]

    Fees for interconnection requests increase with each Level. A Level 1 request must submit $50 fee; a Level 2 request must submit a fee of $50 plus $1/kW of generator capacity; a Level 3 request m...

  20. Interconnection Standards

    Broader source: Energy.gov [DOE]

    In February 2011, the DPU opened up a docket to examine net metering and interconnection of distributed generation. While the intent is to make changes to net metering, issues relating to interco...

  1. Interconnection Standards

    Broader source: Energy.gov [DOE]

    Oregon has three separate interconnection standards: one for net-metered systems, one for small generator facilities (non-net metered systems) and one for large generator facilities (non-net...

  2. Interconnection Guidelines

    Broader source: Energy.gov [DOE]

    Kansas adopted the Net Metering and Easy Connection Act in May 2009 (see K.S.A. 66-1263 through 66-1271), establishing interconnection guidelines and net metering for customer-owned generators. Net...

  3. Interconnection Guidelines

    Broader source: Energy.gov [DOE]

    Nebraska enacted legislation in May 2009 [http://nebraskalegislature.gov/FloorDocs/101/PDF/Final/LB436.pdf (LB 436)], establishing general rules for interconnecting and net metering systems that...

  4. Interconnection Standards

    Broader source: Energy.gov [DOE]

    NOTE: In Feb 2014, the PUC proposed changes to the State’s Alternative Energy Portfolio Standard, Interconnection, and Net-metering rules. The documents associated with the case can be accessed at...

  5. Interconnection Standards

    Broader source: Energy.gov [DOE]

    In March 2008, the Florida Public Service Commission (PSC) adopted interconnection rules for renewable-energy systems up to two megawatts (MW) in capacity. The PSC rules apply only to the state's...

  6. Interconnection Standards

    Broader source: Energy.gov [DOE]

    Vermont has adopted separate interconnection standards for net-metered energy systems that are 150 kW or less, and for all other distributed-generation (DG) systems.

  7. Interconnected semiconductor devices

    DOE Patents [OSTI]

    Grimmer, Derrick P. (White Bear Lake, MN); Paulson, Kenneth R. (North St. Paul, MN); Gilbert, James R. (St. Paul, MN)

    1990-10-23T23:59:59.000Z

    Semiconductor layer and conductive layer formed on a flexible substrate, divided into individual devices and interconnected with one another in series by interconnection layers and penetrating terminals.

  8. Updating Technical Screens for PV Interconnection: Preprint

    SciTech Connect (OSTI)

    Coddington, M.; Ellis, A.; Lynn, K.; Razon, A.; Key, T.; Kroposki, B.; Mather, B.; Hill, R.; Nicole, K.; Smith, J.

    2012-08-01T23:59:59.000Z

    Solar photovoltaics (PV) is the dominant type of distributed generation (DG) technology interconnected to electric distribution systems in the United States, and deployment of PV systems continues to increase rapidly. Considering the rapid growth and widespread deployment of PV systems in United States electric distribution grids, it is important that interconnection procedures be as streamlined as possible to avoid unnecessary interconnection studies, costs, and delays. Because many PV interconnection applications involve high penetration scenarios, the process needs to allow for a sufficiently rigorous technical evaluation to identify and address possible system impacts. Existing interconnection procedures are designed to balance the need for efficiency and technical rigor for all DG. However, there is an implicit expectation that those procedures will be updated over time in order to remain relevant with respect to evolving standards, technology, and practical experience. Modifications to interconnection screens and procedures must focus on maintaining or improving safety and reliability, as well as accurately allocating costs and improving expediency of the interconnection process. This paper evaluates the origins and usefulness of the capacity penetration screen, offers potential short-term solutions which could effectively allow fast-track interconnection to many PV system applications, and considers longer-term solutions for increasing PV deployment levels in a safe and reliable manner while reducing or eliminating the emphasis on the penetration screen.

  9. Interconnection networks

    DOE Patents [OSTI]

    Faber, V.; Moore, J.W.

    1988-06-20T23:59:59.000Z

    A network of interconnected processors is formed from a vertex symmetric graph selected from graphs GAMMA/sub d/(k) with degree d, diameter k, and (d + 1)exclamation/ (d /minus/ k + 1)exclamation processors for each d greater than or equal to k and GAMMA/sub d/(k, /minus/1) with degree d /minus/ 1, diameter k + 1, and (d + 1)exclamation/(d /minus/ k + 1)exclamation processors for each d greater than or equal to k greater than or equal to 4. Each processor has an address formed by one of the permutations from a predetermined sequence of letters chosen a selected number of letters at a time, and an extended address formed by appending to the address the remaining ones of the predetermined sequence of letters. A plurality of transmission channels is provided from each of the processors, where each processor has one less channel than the selected number of letters forming the sequence. Where a network GAMMA/sub d/(k, /minus/1) is provided, no processor has a channel connected to form an edge in a direction delta/sub 1/. Each of the channels has an identification number selected from the sequence of letters and connected from a first processor having a first extended address to a second processor having a second address formed from a second extended address defined by moving to the front of the first extended address the letter found in the position within the first extended address defined by the channel identification number. The second address is then formed by selecting the first elements of the second extended address corresponding to the selected number used to form the address permutations. 9 figs.

  10. Thermal Stress and Reliability for Advanced Power Electronics...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Performance and Reliability of Bonded Interfaces Physics of Failure of Electrical Interconnects Thermal Stress and Reliability for Advanced Power Electronics and Electric Machines...

  11. Joint first-passage probability, and reliability of systems under Stochastic excitation

    E-Print Network [OSTI]

    Song, J; Kiureghian, A D

    2006-01-01T23:59:59.000Z

    and reliability of electrical substation equipment andthe reliability of a system of interconnected equipmentthe reliability of a system of inter- connected equipment

  12. Northeast United States U.S. Department of Energy Office of Electricit...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Assessment of the Adequacy of Natural Gas Pipeline Capacity in the Northeast United States U.S. Department of Energy Office of Electricity Delivery and Energy Reliability Energy...

  13. February 2003 INTERCONNECTIONS

    E-Print Network [OSTI]

    an Interconnection Security Agreement (ISA), which specifies the technical and security requirements of the interconFebruary 2003 SECURE INTERCONNECTIONS FOR INFORMATION TECHNOLOGY SYSTEMS Shirley Radack, Editor choose to interconnect their IT systems for a variety of reasons, depending on their organizational needs

  14. North American Electric Reliability Corporation Interconnections |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of Contamination in Many DevilsForumEnginesVacantmagneticDepartment ofDepartment of

  15. North American Electric Reliability Corporation Interconnections |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking ofOilNEW HAMPSHIREofNewsletter NewsletterGeneralof EnergyDepartment of

  16. North American Electric Reliability Corporation Interconnections |

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy ChinaofSchaeferAprilOverview | DepartmentofEmerging TechnologiesSchoolsDepartment of

  17. Updating Small Generator Interconnection Procedures for New Market Conditions

    SciTech Connect (OSTI)

    Coddington, M.; Fox, K.; Stanfield, S.; Varnado, L.; Culley, T.; Sheehan, M.

    2012-12-01T23:59:59.000Z

    Federal and state regulators are faced with the challenge of keeping interconnection procedures updated against a backdrop of evolving technology, new codes and standards, and considerably transformed market conditions. This report is intended to educate policymakers and stakeholders on beneficial reforms that will keep interconnection processes efficient and cost-effective while maintaining a safe and reliable power system.

  18. Reliability Assessment Incorporating Operational Considerations and Economic

    E-Print Network [OSTI]

    PSERC Reliability Assessment Incorporating Operational Considerations and Economic Aspects Engineering Research Center Reliability Assessment Incorporating Operational Considerations and Economic and Economic Aspects for Large Interconnected Grids." We express our appreciation for the support provided

  19. PJM Interconnection (Multiple States)

    Broader source: Energy.gov [DOE]

    PJM (originally Pennsylvania, Jersey, Maryland) Interconnection is a Regional Transmission Organization (RTO) that coordinates the movement of wholesale electricity in all or parts of Delaware,...

  20. Perforation patterned electrical interconnects

    DOE Patents [OSTI]

    Frey, Jonathan

    2014-01-28T23:59:59.000Z

    This disclosure describes systems and methods for increasing the usable surface area of electrical contacts within a device, such as a thin film solid state device, through the implementation of electrically conductive interconnects. Embodiments described herein include the use of a plurality of electrically conductive interconnects that penetrate through a top contact layer, through one or more multiple layers, and into a bottom contact layer. The plurality of conductive interconnects may form horizontal and vertical cross-sectional patterns. The use of lasers to form the plurality of electrically conductive interconnects from reflowed layer material further aids in the manufacturing process of a device.

  1. Solar cell array interconnects

    DOE Patents [OSTI]

    Carey, P.G.; Thompson, J.B.; Colella, N.J.; Williams, K.A.

    1995-11-14T23:59:59.000Z

    Electrical interconnects are disclosed for solar cells or other electronic components using a silver-silicone paste or a lead-tin (Pb-Sn) no-clean fluxless solder cream, whereby the high breakage of thin (<6 mil thick) solar cells using conventional solder interconnect is eliminated. The interconnects of this invention employs copper strips which are secured to the solar cells by a silver-silicone conductive paste which can be used at room temperature, or by a Pb-Sn solder cream which eliminates undesired residue on the active surfaces of the solar cells. Electrical testing using the interconnects of this invention has shown that no degradation of the interconnects developed under high current testing, while providing a very low contact resistance value. 4 figs.

  2. Solar cell array interconnects

    DOE Patents [OSTI]

    Carey, Paul G. (Mountain View, CA); Thompson, Jesse B. (Brentwood, CA); Colella, Nicolas J. (Livermore, CA); Williams, Kenneth A. (Livermore, CA)

    1995-01-01T23:59:59.000Z

    Electrical interconnects for solar cells or other electronic components using a silver-silicone paste or a lead-tin (Pb-Sn) no-clean fluxless solder cream, whereby the high breakage of thin (<6 mil thick) solar cells using conventional solder interconnect is eliminated. The interconnects of this invention employs copper strips which are secured to the solar cells by a silver-silicone conductive paste which can be used at room temperature, or by a Pb-Sn solder cream which eliminates undesired residue on the active surfaces of the solar cells. Electrical testing using the interconnects of this invention has shown that no degradation of the interconnects developed under high current testing, while providing a very low contact resistance value.

  3. Micro-fluidic interconnect

    DOE Patents [OSTI]

    Okandan, Murat (Albuquerque, NM); Galambos, Paul C. (Albuquerque, NM); Benavides, Gilbert L. (Los Ranchos, NM); Hetherington, Dale L. (Albuquerque, NM)

    2006-02-28T23:59:59.000Z

    An apparatus for simultaneously aligning and interconnecting microfluidic ports is presented. Such interconnections are required to utilize microfluidic devices fabricated in Micro-Electromechanical-Systems (MEMS) technologies, that have multiple fluidic access ports (e.g. 100 micron diameter) within a small footprint, (e.g. 3 mm.times.6 mm). Fanout of the small ports of a microfluidic device to a larger diameter (e.g. 500 microns) facilitates packaging and interconnection of the microfluidic device to printed wiring boards, electronics packages, fluidic manifolds etc.

  4. Interconnection Guidelines (Rhode Island)

    Broader source: Energy.gov [DOE]

    Rhode Island enacted legislation (HB 6222) in June 2011 to standardize the application process for the interconnection of customer-sited renewable-energy systems to the state’s distribution grid....

  5. Puerto Rico- Interconnection Standards

    Broader source: Energy.gov [DOE]

    In 2007, the Autoridad de Energía Electrica de Puerto Rico (PREPA*) adopted interconnection standards based on the standard contained in the federal Energy Policy Act of 2005. PREPA promulgated...

  6. Northeast Energy Efficiency Partnerships: Advanced Lighting Controls...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Northeast Energy Efficiency Partnerships: Advanced Lighting Controls - 2015 Peer Review Northeast Energy Efficiency Partnerships: Advanced Lighting Controls - 2015 Peer Review...

  7. Energy and water in the Western and Texas interconnects.

    SciTech Connect (OSTI)

    Tidwell, Vincent Carroll

    2010-08-01T23:59:59.000Z

    The Department of Energy's Office of Electricity has initiated a $60M program to assist the electric industry in interconnection-level analysis and planning. The objective of this effort is to facilitate the development or strengthening of capabilities in each of the three interconnections serving the lower 48 states of the United States, to prepare analyses of transmission requirements under a broad range of alternative futures and develop long-term interconnection-wide transmission expansion plans. The interconnections are the Western Interconnection, the Eastern Interconnection, and the Texas Interconnection. One element of this program address the support and development of an integrated energy-water Decision Support System (DSS) that will enable planners in the Western and Texas Interconnections to analyze the potential implications of water stress for transmission and resource planning (the Eastern Interconnection is not participating in this element). Specific objectives include: (1) Develop an integrated Energy-Water Decision Support System (DSS) that will enable planners in the Western and Texas Interconnections to analyze the potential implications of water stress for transmission and resource planning. (2) Pursue the formulation and development of the Energy-Water DSS through a strongly collaborative process between members of this proposal team and the Western Electricity Coordinating Council (WECC), Western Governors Association (WGA), the Electric Reliability Council of Texas (ERCOT) and their associated stakeholder teams. (3) Exercise the Energy-Water DSS to investigate water stress implications of the transmission planning scenarios put forward by WECC, WGA, and ERCOT. The goals of this project are: (1) Develop an integrated Energy-Water Decision Support System (DSS) that will enable planners to analyze the potential implications of water stress for transmission and resource planning. (2) Pursue the formulation and development of the Energy-Water DSS through a strongly collaborative process between Western Electricity Coordinating Council, Electric Reliability Council of Texas, Western Governors Association, and Western States Water Council. (3) Exercise the Energy-Water DSS to investigate water transmission planning scenarios.

  8. Reversible concentric ring microfluidic interconnects

    E-Print Network [OSTI]

    Thompson, Mary Kathryn, 1980-

    2004-01-01T23:59:59.000Z

    A reversible, Chip-to-Chip microfluidic interconnect was designed for use in high temperature, high pressure applications such as chemical microreactor systems. The interconnect uses two sets of concentric, interlocking ...

  9. Capillary interconnect device

    DOE Patents [OSTI]

    Renzi, Ronald F

    2013-11-19T23:59:59.000Z

    An interconnecting device for connecting a plurality of first fluid-bearing conduits to a corresponding plurality of second fluid-bearing conduits thereby providing fluid communication between the first fluid-bearing conduits and the second fluid-bearing conduits. The device includes a manifold and one or two ferrule plates that are held by compressive axial forces.

  10. Northeast Regional Biomass Program

    SciTech Connect (OSTI)

    Lusk, P.D.

    1992-12-01T23:59:59.000Z

    The Northeast Regional Biomass Program has been in operation for a period of nine years. During this time, state managed programs and technical programs have been conducted covering a wide range of activities primarily aim at the use and applications of wood as a fuel. These activities include: assessments of available biomass resources; surveys to determine what industries, businesses, institutions, and utility companies use wood and wood waste for fuel; and workshops, seminars, and demonstrations to provide technical assistance. In the Northeast, an estimated 6.2 million tons of wood are used in the commercial and industrial sector, where 12.5 million cords are used for residential heating annually. Of this useage, 1504.7 mw of power has been generated from biomass. The use of wood energy products has had substantial employment and income benefits in the region. Although wood and woodwaste have received primary emphasis in the regional program, the use of municipal solid waste has received increased emphasis as an energy source. The energy contribution of biomass will increase as potentia users become more familiar with existing feedstocks, technologies, and applications. The Northeast Regional Biomass Program is designed to support region-specific to overcome near-term barriers to biomass energy use.

  11. Effect of Via Separationand Low-k Dielectric Materials on the Thermal Characteristics of Cu Interconnects

    E-Print Network [OSTI]

    and their impact on interconnect reliability and performance [7, 81. Furthermore, self-heating in via structures in the metal wires and evaluate the impact of via separation. Based on the thermal-electrical analogy (Fig. I

  12. Northeast Clean Energy Application Center

    SciTech Connect (OSTI)

    Bourgeois, Tom

    2013-09-30T23:59:59.000Z

    From October 1, 2009 through September 30, 2013 (“contract period”), the Northeast Clean Energy Application Center (“NE-CEAC”) worked in New York and New England (Connecticut, Rhode Island, Vermont, Massachusetts, New Hampshire, and Maine) to create a more robust market for the deployment of clean energy technologies (CETs) including combined heat and power (CHP), district energy systems (DES), and waste heat recovery (WHR) systems through the provision of technical assistance, education and outreach, and strategic market analysis and support for decision-makers. CHP, DES, and WHR can help reduce greenhouse gas emissions, reduce electrical and thermal energy costs, and provide more reliable energy for users throughout the United States. The NE-CEAC’s efforts in the provision of technical assistance, education and outreach, and strategic market analysis and support for decision-makers helped advance the market for CETs in the Northeast thereby helping the region move towards the following outcomes: • Reduction of greenhouse gas emissions and criteria pollutants • Improvements in energy efficiency resulting in lower costs of doing business • Productivity gains in industry and efficiency gains in buildings • Lower regional energy costs • Strengthened energy security • Enhanced consumer choice • Reduced price risks for end-users • Economic development effects keeping more jobs and more income in our regional economy Over the contract period, NE-CEAC provided technical assistance to approximately 56 different potential end-users that were interested in CHP and other CETs for their facility or facilities. Of these 56 potential end-users, five new CHP projects totaling over 60 MW of install capacity became operational during the contract period. The NE-CEAC helped host numerous target market workshops, trainings, and webinars; and NE-CEAC staff delivered presentations at many other workshops and conferences. In total, over 60 different workshops, conferences, webinars, and presentation were hosted or delivered during the contract period. The NE-CEAC also produced publically available educational materials such as CHP project profiles. Finally, the NE-CEAC worked closely with the relevant state agencies involved with CHP development. In New York, the NE-CEAC played an important role in securing and maintaining funding for CHP incentive programs administered by the New York State Energy Research Development Authority. NE-CEAC was also involved in the NYC Mayor's Office DG Collaborative. The NECEAC was also named a strategic resource for the Connecticut Department of Energy and Environmental Protection’s innovative Microgrid Pilot Program.

  13. 10 Year Transmission Plan for the Western Electricity Interconnection Released

    Broader source: Energy.gov [DOE]

    The Western Electricity Coordinating Council (WECC) announced the release of its first 10-Year Regional Transmission Plan (Plan) for the Western Interconnection. The Office of Electricity Delivery and Energy Reliability awarded WECC a $14.5 million grant under the American Recovery and Reinvestment Act to expand on its transmission planning activities.

  14. Updating Interconnection Screens for PV System Integration

    SciTech Connect (OSTI)

    Coddington, M.; Mather, B.; Kroposki, B.; Lynn, K.; Razon, A.; Ellis, A.; Hill, R.; Key, T.; Nicole, K.; Smith, J.

    2012-02-01T23:59:59.000Z

    This white paper evaluates the origins and usefulness of the capacity penetration screen, offer short-term solutions which could effectively allow fast-track interconnection to many PV system applications, and considers longer-term solutions for increasing PV deployment levels in a safe and reliable manner while reducing or eliminating the emphasis on the penetration screen. Short-term and longer-term alternatives approaches are offered as examples; however, specific modifications to screening procedures should be discussed with stakeholders and must ultimately be adopted by state and federal regulatory bodies.

  15. RidgenoseSolarInterconnectionProject

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ridgenose Solar Interconnection Project The Western Area Power Administration (Western), an agency of the Department of Energy (DOE), is preparing an environmental assessment (EA)...

  16. RidgenoseSolarInterconnectionProject

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to a request from Longview Solar, LLC, to interconnect their proposed Cliffrose Solar Energy Plant, located south of Kingman, Mohave County, Arizona to Westerns...

  17. Interconnection Agreements for Onsite Generation

    Broader source: Energy.gov [DOE]

    Presentation covers Interconnection Agreements for Onsite Generation and is given at the Spring 2011 Federal Utility Partnership Working Group (FUPWG) meeting.

  18. GSA-Utility Interconnection Agreements

    Broader source: Energy.gov [DOE]

    Presentation—given at at the Fall 2012 Federal Utility Partnership Working Group (FUPWG) meeting—covers the General Service Administration's (GSA's) utility interconnection agreements.

  19. Interconnection Standards for Small Generators

    Broader source: Energy.gov [DOE]

    The Federal Energy Regulatory Commission (FERC) adopted "small generator" interconnection standards for distributed energy resources up to 20 megawatts (MW) in capacity in May 2005.* The FERC's...

  20. QER- Comment of Northeast Gas Association

    Broader source: Energy.gov [DOE]

    Please find enclosed comments of the Northeast Gas Association regarding the Quadrennial Energy Review. Thank you.

  1. Process for electrically interconnecting electrodes

    DOE Patents [OSTI]

    Carey, Paul G. (Mountain View, CA); Thompson, Jesse B. (Brentwood, CA); Colella, Nicolas J. (Livermore, CA); Williams, Kenneth A. (Livermore, CA)

    2002-01-01T23:59:59.000Z

    Electrical interconnects for solar cells or other electronic components using a silver-silicone paste or a lead-tin (Pb--Sn) no-clean fluxless solder cream, whereby the high breakage of thin (<6 mil thick) solar cells using conventional solder interconnect is eliminated. The interconnects of this invention employs copper strips which are secured to the solar cells by a silver-silicone conductive paste which can be used at room temperature, or by a Pb--Sn solder cream which eliminates undesired residue on the active surfaces of the solar cells. Electrical testing using the interconnects of this invention has shown that no degradation of the interconnects developed under high current testing, while providing a very low contact resistance value.

  2. Sandia National Laboratories: Small Generator Interconnection...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Commission Revised Its Small Generator Interconnection Procedure and Small Generator Interconnection Agreement On March 4, 2014, in Distribution Grid Integration, Energy, Grid...

  3. Sandia National Laboratories: Updating Interconnection Screens...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Commission Revised Its Small Generator Interconnection Procedure and Small Generator Interconnection Agreement On March 4, 2014, in Distribution Grid Integration, Energy, Grid...

  4. Renewable Systems Interconnection: Executive Summary

    SciTech Connect (OSTI)

    Kroposki, B.; Margolis, R.; Kuswa, G.; Torres, J.; Bower, W.; Key, T.; Ton, D.

    2008-02-01T23:59:59.000Z

    The U.S. Department of Energy launched the Renewable Systems Interconnection (RSI) study in 2007 to address the challenges to high penetrations of distributed renewable energy technologies. The RSI study consists of 14 additional reports.

  5. Analysis of interconnect microstrip lines

    E-Print Network [OSTI]

    Luong, Giam-Minh

    1992-01-01T23:59:59.000Z

    of the return loss of the slot-coupled microstrip dipole. Section C presents two simulations of the return loss on the slot- coupled rectangular patch antenna. A. Interconnect of Microstrip Lines Several circuits with the geometry of Figure 1 were fabricated.... Experimental and Theoretical Results of the Interconnect Two circuits were designed and fabricated. Each circuit consists of two substrates as shown in Figure 9. One substrate has an open microstrip line etched in one side and an aperture etched...

  6. National Offshore Wind Energy Grid Interconnection Study

    SciTech Connect (OSTI)

    Daniel, John P. [ABB Inc; Liu, Shu [ABB Inc; Ibanez, Eduardo [National Renewable Energy Laboratory; Pennock, Ken [AWS Truepower; Reed, Greg [University of Pittsburgh; Hanes, Spencer [Duke Energy

    2014-07-30T23:59:59.000Z

    The National Offshore Wind Energy Grid Interconnection Study (NOWEGIS) considers the availability and potential impacts of interconnecting large amounts of offshore wind energy into the transmission system of the lower 48 contiguous United States. A total of 54GW of offshore wind was assumed to be the target for the analyses conducted. A variety of issues are considered including: the anticipated staging of offshore wind; the offshore wind resource availability; offshore wind energy power production profiles; offshore wind variability; present and potential technologies for collection and delivery of offshore wind energy to the onshore grid; potential impacts to existing utility systems most likely to receive large amounts of offshore wind; and regulatory influences on offshore wind development. The technologies considered the reliability of various high-voltage ac (HVAC) and high-voltage dc (HVDC) technology options and configurations. The utility system impacts of GW-scale integration of offshore wind are considered from an operational steady-state perspective and from a regional and national production cost perspective.

  7. Reliability of Interconnection Networks Modeled by Cartesian Product Digraphs

    E-Print Network [OSTI]

    Xu, Jun-Ming

    or superconnected. Motivated by the technique in [1], in this note, we com- pletely determine the connectivity

  8. Vehicle Technologies Office Merit Review 2014: Reliability of Electrical Interconnects

    Broader source: Energy.gov [DOE]

    Presentation given by National Renewable Energy Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about...

  9. Energy and Reliability in Future NOC Interconnected CMPS

    E-Print Network [OSTI]

    Kim, Hyungjun

    2013-08-01T23:59:59.000Z

    of network energy consumption through techniques that reduce link and router-level switching activity. We specifically focus on memory subsystem traffic, as it comprises the bulk of NoC load in a CMP. By transmitting only the flits that contain words that we...

  10. New Report Characterizes Existing Offshore Wind Grid Interconnection...

    Office of Environmental Management (EM)

    New Report Characterizes Existing Offshore Wind Grid Interconnection Capabilities New Report Characterizes Existing Offshore Wind Grid Interconnection Capabilities September 3,...

  11. Flexible interconnects for fuel cell stacks

    DOE Patents [OSTI]

    Lenz, David J.; Chung, Brandon W.; Pham, Ai Quoc

    2004-11-09T23:59:59.000Z

    An interconnect that facilitates electrical connection and mechanical support with minimal mechanical stress for fuel cell stacks. The interconnects are flexible and provide mechanically robust fuel cell stacks with higher stack performance at lower cost. The flexible interconnects replace the prior rigid rib interconnects with flexible "fingers" or contact pads which will accommodate the imperfect flatness of the ceramic fuel cells. Also, the mechanical stress of stacked fuel cells will be smaller due to the flexibility of the fingers. The interconnects can be one-sided or double-sided.

  12. Magnetic anomalies northeast of Shatsky Plateau

    E-Print Network [OSTI]

    Risch, David Lawrence

    1982-01-01T23:59:59.000Z

    MAGNETIC ANOMALIES NORTHEAST OF SHATSKY PLATEAU A Thesis by DAVID LAWRENCE RISCH Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE May 1982 Major Subject...: Oceanography MAGNETIC ANOMALIES NORTHEAST OF SHATSKY PLATEAU A Thesis by DAVID LAWRENCE RISCH Approved as to style and content by: C rman Committee Member Member Head of Department May 198Z ABSTRACT Magnetic Anomalies Northeast of Shatsky Plateau...

  13. Determination of Interfacial Adhesion Strength between Oxide Scale and Substrate for Metallic SOFC Interconnects

    SciTech Connect (OSTI)

    Sun, Xin; Liu, Wenning N.; Stephens, Elizabeth V.; Khaleel, Mohammad A.

    2008-01-21T23:59:59.000Z

    The interfacial adhesion strength between the oxide scale and the substrate is crucial to the reliability and durability of metallic interconnects in SOFC operating environments. It is necessary, therefore, to establish a methodology to quantify the interfacial adhesion strength between the oxide scale and the metallic interconnect substrate, and furthermore to design and optimize the interconnect material as well as the coating materials to meet the design life of an SOFC system. In this paper, we present an integrated experimental/analytical methodology for quantifying the interfacial adhesion strength between oxide scale and a ferritic stainless steel interconnect. Stair-stepping indentation tests are used in conjunction with subsequent finite element analyses to predict the interfacial strength between the oxide scale and Crofer 22 APU substrate.

  14. Energy and Security in Northeast Asia

    E-Print Network [OSTI]

    May, Michael; Johnson, Celeste; Fei, Edward; Suzuki, Tatsujiro

    1996-01-01T23:59:59.000Z

    regional cooperation on energy and security issues in Asia.Energy and Security in Northeast Asia An IGCC studycan be drawn. The energy security situation and outlook are

  15. Natural Gas Demand Markets in the Northeast

    Broader source: Energy.gov (indexed) [DOE]

    Providing a Significant Opportunity for New and Expanding Natural Gas Demand Markets in the Northeast Prepared for: America's Natural Gas Alliance (ANGA) Prepared by: Bentek...

  16. Northeast Home Heating Oil Reserve - Guidelines for Release ...

    Office of Environmental Management (EM)

    Heating Oil Reserve Northeast Home Heating Oil Reserve - Guidelines for Release Northeast Home Heating Oil Reserve - Guidelines for Release The Energy Policy and Conservation...

  17. area northeast china: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    potassic basalts are characterized by significant 230 Th Zou, Haibo 3 Market power and electricity market reform in Northeast China MIT - DSpace Summary: The Northeast region of...

  18. Northeast Home Heating Oil Reserve System Heating Oil, PIA Office...

    Energy Savers [EERE]

    Northeast Home Heating Oil Reserve System Heating Oil, PIA Office of Fossil Energy Headquaters Northeast Home Heating Oil Reserve System Heating Oil, PIA Office of Fossil Energy...

  19. HVDC Control Strategies to Improve Transient Stability in Interconnected Power Systems

    E-Print Network [OSTI]

    Boyer, Edmond

    HVDC Control Strategies to Improve Transient Stability in Interconnected Power Systems J. Hazra Dpt of Li`ege, Belgium, dernst@ulg.ac.be Abstract--This paper presents three HVDC modulation strate- gies flow settings through the HVDC-links. The proposed techniques are tested on the IEEE 24-Bus reliability

  20. Northeast Solar Energy Research Center (NSERC)

    E-Print Network [OSTI]

    Ohta, Shigemi

    Northeast Solar Energy Research Center (NSERC) A multi-purpose research facility on the BNL campus-level current and voltage · High Sample Rates ­1 sec data (512 samples per cycle for PQ data) Solar Energy Testing #12;BNL is developing a new Northeast Solar Energy Research Center (NSERC) on its campus

  1. Interconnect

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes | National Nuclear SecurityIntellectual

  2. Double interconnection fuel cell array

    DOE Patents [OSTI]

    Draper, R.; Zymboly, G.E.

    1993-12-28T23:59:59.000Z

    A fuel cell array is made, containing number of tubular, elongated fuel cells which are placed next to each other in rows (A, B, C, D), where each cell contains inner electrodes and outer electrodes, with solid electrolyte between the electrodes, where the electrolyte and outer electrode are discontinuous, having two portions, and providing at least two opposed discontinuities which contain at least two oppositely opposed interconnections contacting the inner electrode, each cell having only three metallic felt electrical connectors which contact surrounding cells, where each row is electrically connected to the other. 5 figures.

  3. Minimum Buffered Routing with Bounded Capacitive Load for Slew Rate and Reliability Control

    E-Print Network [OSTI]

    Zelikovsky, Alexander

    reliability with respect to hot­carrier oxide breakdown and AC self­heating in interconnects, and guarantees electrons) [10], [12] and AC self­heating in interconnects [20], and facilitate technology migration since capacitance at gate outputs is a well­known part of today's electrical correctness methodologies. Bounds

  4. Recent Development of SOFC Metallic Interconnect

    SciTech Connect (OSTI)

    Wu JW, Liu XB

    2010-04-01T23:59:59.000Z

    Interest in solid oxide fuel cells (SOFC) stems from their higher e±ciencies and lower levels of emitted pollu- tants, compared to traditional power production methods. Interconnects are a critical part in SOFC stacks, which connect cells in series electrically, and also separate air or oxygen at the cathode side from fuel at the anode side. Therefore, the requirements of interconnects are the most demanding, i:e:, to maintain high elec- trical conductivity, good stability in both reducing and oxidizing atmospheres, and close coe±cient of thermal expansion (CTE) match and good compatibility with other SOFC ceramic components. The paper reviewed the interconnect materials, and coatings for metallic interconnect materials.

  5. NREL: Technology Deployment - Distributed Generation Interconnection...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Distributed Generation Interconnection Collaborative Become a Member DGIC members are included in quarterly informational meetings and discussions related to distributed PV...

  6. Updating Interconnection Screens for PV System Integration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Abraham Ellis, Roger Hill Sandia National Laboratories Tom Key, Kristen Nicole, Jeff Smith Electric Power Research Institute Updating Interconnection Screens for PV System...

  7. Interconnecting PV on New York City's Secondary Network Distribution System

    SciTech Connect (OSTI)

    K. Anderson; M. Coddington; K. Burman; S. Hayter; B. Kroposki; and A. Watson

    2009-11-30T23:59:59.000Z

    The U.S. Department of Energy (DOE) has teamed with cities across the country through the Solar America Cities (SAC) partnership program to help reduce barriers and accelerate implementation of solar energy. The New York City SAC team is a partnership between the City University of New York (CUNY), the New York City Mayor s Office of Long-term Planning and Sustainability, and the New York City Economic Development Corporation (NYCEDC).The New York City SAC team is working with DOE s National Renewable Energy Laboratory (NREL) and Con Edison, the local utility, to develop a roadmap for photovoltaic (PV) installations in the five boroughs. The city set a goal to increase its installed PV capacity from1.1 MW in 2005 to 8.1 MW by 2015 (the maximum allowed in 2005). A key barrier to reaching this goal, however, is the complexity of the interconnection process with the local utility. Unique challenges are associated with connecting distributed PV systems to secondary network distribution systems (simplified to ���¢��������networks���¢������� in this report). Although most areas of the country use simpler radial distribution systems to distribute electricity, larger metropolitan areas like New York City typically use networks to increase reliability in large load centers. Unlike the radial distribution system, where each customer receives power through a single line, a network uses a grid of interconnected lines to deliver power to each customer through several parallel circuits and sources. This redundancy improves reliability, but it also requires more complicated coordination and protection schemes that can be disrupted by energy exported from distributed PV systems. Currently, Con Edison studies each potential PV system in New York City to evaluate the system s impact on the network, but this is time consuming for utility engineers and may delay the customer s project or add cost for larger installations. City leaders would like to streamline this process to facilitate faster, simpler, and less expensive distributed PV system interconnections. To assess ways to improve the interconnection process, NREL conducted a four-part study with support from DOE. The NREL team then compiled the final reports from each study into this report. In Section 1���¢��������PV Deployment Analysis for New York City���¢��������we analyze the technical potential for rooftop PV systems in the city. This analysis evaluates potential PV power production in ten Con Edison networks of various locations and building densities (ranging from high density apartments to lower density single family homes). Next, we compare the potential power production to network loads to determine where and when PV generation is most likely to exceed network load and disrupt network protection schemes. The results of this analysis may assist Con Edison in evaluating future PV interconnection applications and in planning future network protection system upgrades. This analysis may also assist other utilities interconnecting PV systems to networks by defining a method for assessing the technical potential of PV in the network and its impact on network loads. Section 2���¢��������A Briefing for Policy Makers on Connecting PV to a Network Grid���¢��������presents an overview intended for nontechnical stakeholders. This section describes the issues associated with interconnecting PV systems to networks, along with possible solutions. Section 3���¢��������Technical Review of Concerns and Solutions to PV Interconnection in New Y

  8. Minimum Buffered Routing with Bounded Capacitive Load for Slew Rate and Reliability Control

    E-Print Network [OSTI]

    Zelikovsky, Alexander

    with respect to hot-carrier oxide breakdown and AC self-heating in interconnects, and guarantees bounded input reliability with respect to hot-carrier oxide breakdown (hot electrons) [10], [12] and AC self-heating

  9. Investigation of the Fundamental Reliability Unit for Cu Dual-Damascene Metallization

    E-Print Network [OSTI]

    Gan, C.L.

    An investigation has been carried out to determine the fundamental reliability unit of copper dual-damascene metallization. Electromigration experiments have been carried out on straight via-to-via interconnects in the ...

  10. Report Comparing the Impacts of Northeast Hurricanes Now Available

    Broader source: Energy.gov [DOE]

    The report "Comparing the Impacts of Northeast Hurricanes on Energy Infrastructure" is now available for download.

  11. Durability of Metallic Interconnects and Protective Coatings

    SciTech Connect (OSTI)

    Yang, Zhenguo; Stevenson, Jeffry W.

    2009-12-15T23:59:59.000Z

    To build up a useful voltage, a number of solid oxide fuel cells (SOFCs) are electrically connected into series in a stack via interconnects, which are placed between adjacent cells. In addition to functioning as a bi-polar electrical connector, the interconnect also acts as a separator plate that separates the fuel at the anode side of one cell from the air at the cathode side on an adjacent cell. During SOFC operation at the high temperatures, the interconnects are thus simultaneously exposed to the oxidizing air at one side and a reducing fuel that can be either hydrogen or hydrocarbon at the other. Besides, they are in contact with adjacent components, such as electrodes or electrical contacts, seals, etc. With steady reduction in SOFC operating temperatures into the low or intermediate range 600-850oC, oxidation resistant alloys are often used to construct interconnects. However, the metallic interconnects may degrade via interactions at their interfaces with surrounding environments or adjacent components, potentially affecting the stability and performance of interconnects and the SOFC stacks. Thus protection layers are applied to metallic interconnects that also intend to mitigate or prevent chromium migration into cells and the cell poisoning. This chapter provides a comprehensive review of materials for metallic interconnects, their degradation and coating protection.

  12. Pricing in Information-Centric Network Interconnection

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    --ICN interconnection, economic incentives, col- laborative caching, non-cooperative games, network pricing. I economic incentives for caching and sharing content in ICN interconnection. For example, an ISP provider Engineering Department, ETH Zurich, Switzerland Abstract--We propose a pricing model to study the economic

  13. SIMULTANEOUS INTERCONNECTION AND DAMPING ASSIGNMENT PASSIVITYBASED

    E-Print Network [OSTI]

    Batlle, Carles

    SIMULTANEOUS INTERCONNECTION AND DAMPING ASSIGNMENT PASSIVITY­BASED CONTROL: TWO PRACTICAL EXAMPLES­UNAM, Apartado Postal 70-256, 04510 M´exico D.F., MEXICO, gerardoe@servidor.unam.mx Laboratoire des Signaux et.Ortega@lss.supelec.fr Abstract: We argue in this paper that the standard two­stage procedure used in Interconnection and Damping

  14. EPRI PEAC Corp.: Certification Model Program and Interconnection Agreement Tools

    SciTech Connect (OSTI)

    Not Available

    2003-10-01T23:59:59.000Z

    Summarizes the work of EPRI PEAC Corp., under contract to DOE's Distribution and Interconnection R&D, to develop a certification model program and interconnection agreement tools to support the interconnection of distributed energy resources.

  15. North American Electric Reliability Corporation (NERC): Reliability...

    Office of Environmental Management (EM)

    (NERC): Reliability Considerations from the Integration of Smart Grid North American Electric Reliability Corporation (NERC): Reliability Considerations from the Integration of...

  16. EIS-0372: EPA Notice of Availability of the Environmental Impact...

    Broader source: Energy.gov (indexed) [DOE]

    EIS-0372: EPA Notice of Availability of the Environmental Impact Statement Bangor Hydro-Electric Company Northeast Reliability Interconnect Environmental Protection Agency...

  17. Northeast Gasoline Supply Reserve | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    supplements the Northeast Home Heating Oil Reserve, a one million barrel supply of ultra-low sulfur diesel, which was used for the first time by first-responders and to fill...

  18. 2011 Municipal Consortium Northeast Region Workshop Materials

    Broader source: Energy.gov [DOE]

    This page provides links to the presentations given at the DOE Municipal Solid-State Street Lighting Consortium Northeast Region Workshop, held in Philadelphia, May 19–20, 2011.

  19. AWEA Wind Energy Regional Summit: Northeast

    Office of Energy Efficiency and Renewable Energy (EERE)

    The AWEA Wind Energy Northeast Regional Summit will connect you with New England-area wind energy professionals and offers the opportunity to discuss significant issues related to land-based and...

  20. PIRATA Northeast Extension 2009 / AEROSE Cruise Report

    E-Print Network [OSTI]

    PIRATA Northeast Extension 2009 / AEROSE Cruise Report NOAA Ship Ronald H. Brown RB-09-04 11 July and Korey Martin (NOAA/PMEL) M-AERI: Malgorzata Szczodrak (Univ. Miami) AEROSE: Nick Nalli (NESDIS

  1. Method for fabricating an interconnected array of semiconductor devices

    DOE Patents [OSTI]

    Grimmer, Derrick P. (White Bear Lake, MN); Paulson, Kenneth R. (North St. Paul, MN); Gilbert, James R. (St. Paul, MN)

    1989-10-10T23:59:59.000Z

    Semiconductor layer and conductive layer formed on a flexible substrate, divided into individual devices and interconnected with one another in series by interconnection layers and penetrating terminals.

  2. The regulation of internet interconnection : assessing network market power

    E-Print Network [OSTI]

    Maida, Elisabeth M. (Elisabeth Marigo)

    2013-01-01T23:59:59.000Z

    Interconnection agreements in the telecommunications industry have always been constrained by regulation. Internet interconnection has not received the same level of scrutiny. Recent debates regarding proposed mergers, ...

  3. Renewable Generation and Interconnection to the Electrical Grid...

    Broader source: Energy.gov (indexed) [DOE]

    Generation and Interconnection to the Electrical Grid in Southern California Renewable Generation and Interconnection to the Electrical Grid in Southern California Presentation...

  4. CHP: Connecting the Gap between Markets and Utility Interconnection...

    Office of Environmental Management (EM)

    CHP: Connecting the Gap between Markets and Utility Interconnection and Tariff Practices, 2006 CHP: Connecting the Gap between Markets and Utility Interconnection and Tariff...

  5. Electricity Reliability

    E-Print Network [OSTI]

    electric power equipment with more energy efficiency and higher capacity than today's systems of modernizing the electric grid to meet the nations's need for reliable, electric power, enhancing security continues to increase within the electricity infrastructure. DOE is conducting research, development

  6. Thin-film chip-to-substrate interconnect and methods for making same

    DOE Patents [OSTI]

    Tuckerman, D.B.

    1988-06-06T23:59:59.000Z

    Integrated circuit chips are electrically connected to a silicon wafer interconnection substrate. Thin film wiring is fabricated down bevelled edges of the chips. A subtractive wire fabrication method uses a series of masks and etching steps to form wires in a metal layer. An additive method direct laser writes or deposits very thin lines which can then be plated up to form wires. A quasi-additive or subtractive/additive method forms a pattern of trenches to expose a metal surface which can nucleate subsequent electrolytic deposition of wires. Low inductance interconnections on a 25 micron pitch (1600 wires on a 1 cm square chip) can be produced. The thin film hybrid interconnect eliminates solder joints or welds, and minimizes the levels of metallization. Advantages include good electrical properties, very high wiring density, excellent backside contact, compactness, and high thermal and mechanical reliability. 6 figs.

  7. Photovoltaic performance and reliability workshop

    SciTech Connect (OSTI)

    Kroposki, B.

    1996-10-01T23:59:59.000Z

    This proceedings is the compilation of papers presented at the ninth PV Performance and Reliability Workshop held at the Sheraton Denver West Hotel on September 4--6, 1996. This years workshop included presentations from 25 speakers and had over 100 attendees. All of the presentations that were given are included in this proceedings. Topics of the papers included: defining service lifetime and developing models for PV module lifetime; examining and determining failure and degradation mechanisms in PV modules; combining IEEE/IEC/UL testing procedures; AC module performance and reliability testing; inverter reliability/qualification testing; standardization of utility interconnect requirements for PV systems; need activities to separate variables by testing individual components of PV systems (e.g. cells, modules, batteries, inverters,charge controllers) for individual reliability and then test them in actual system configurations; more results reported from field experience on modules, inverters, batteries, and charge controllers from field deployed PV systems; and system certification and standardized testing for stand-alone and grid-tied systems.

  8. Application Of Ti-Based Self-Formation Barrier Layers To Cu Dual-Damascene Interconnects

    SciTech Connect (OSTI)

    Ito, Kazuhiro; Kohama, Kazuyuki [Department of Materials Science and Engineering, Kyoto University, Kyoto 606-8501 (Japan); Ohmori, Kazuyuki; Mori, Kenichi; Maekawa, Kazuyoshi; Asai, Koyu [Process Technology Div., Renesas Electronics Corporation, Hitachinaka, Ibaraki 312-8504 (Japan); Murakami, Masanori [The Ritsumeikan Trust, Nakagyo-ku, Kyoto 604-8520 (Japan)

    2010-11-24T23:59:59.000Z

    Cu interconnects have been used extensively in ULSI devices. However, large resistance-capacitance delay and poor device reliability have been critical issues as the device feature size has reduced to nanometer scale. In order to achieve low resistance and high reliability of Cu interconnects, we have applied a thin Ti-based self-formed barrier (SFB) using Cu(Ti) alloy seed to 45nm-node dual damascene interconnects and evaluated its performance. The line resistance and via resistance decreased significantly, compared with those of conventional Ta/TaN barriers. The stress migration performance was also drastically improved using the SFB process. A performance of time dependent dielectric breakdown revealed superior endurance. These results suggest that the Ti-based SFB process is one of the most promising candidates for advanced Cu interconnects. TEM and X-ray photoelectron spectroscopy observations for characterization of the Ti-based SFB structure were also performed. The Ti-based SFB consisted of mainly amorphous Ti oxides. Amorphous or crystalline Ti compounds such as TiC, TiN, and TiSi formed beneath Cu alloy films, and the formation varied with dielectric.

  9. Selection and Evaluation of Heat-Resistant Alloys for Planar SOFC Interconnect Applications

    SciTech Connect (OSTI)

    Yang, Z Gary; Weil, K. Scott; Paxton, Dean M.; Stevenson, Jeffry W.

    2002-11-21T23:59:59.000Z

    Over the past several years, the steady reduction in SOFC operating temperatures to the intermediate range of 700~850oC [1] has made it feasible for lanthanum chromite to be supplanted by metals or alloys as the interconnect materials. Compared to doped lanthanum chromite, metals or alloys offer significantly lower raw material and fabrication costs. However, to be a durable and reliable, a metal or alloy has to satisfy several functional requirements specific to the interconnect under SOFC operating conditions. Specifically, the interconnect metal or alloy should possess the following properties: (i) Good surface stability (resistance to oxidation, hot corrosion, and carburization) in both cathodic (air) and anodic (fuel) atmospheres; (ii) Thermal expansion matching to the ceramic PEN (positive cathode-electrolyte-negative anode) and seal materials (as least for a rigid seal design); (iii) High electrical conductivity through both the bulk material and in-situ formed oxide scales; (iv) Bulk and interfacial thermal mechanical reliability and durability at the operating temperature; (v) Compatibility with other materials in contact with interconnects such as seals and electrical contact materials.

  10. Design space exploration of photonic interconnects

    E-Print Network [OSTI]

    Sun, Chen, S.M. Massachusetts Institute of Technology

    2011-01-01T23:59:59.000Z

    As processors scale deep into the multi-core and many-core regimes, bandwidth and energy-efficiency of the on-die interconnect network have become paramount design issues. Recognizing potential limits of electrical ...

  11. Distributed Solar Interconnection Challenges and Best Practices

    Broader source: Energy.gov [DOE]

    The continued growth of the distributed solar market in the United States has spurred electric utilities, regulators, and stakeholders to consider improvements to distributed generation (DG) interconnection processes. More than 475,000 solar energy systems were interconnected in the U.S. by the end of 2013, but 1 million are expected by the end of 2017. Based on the SunShot Initiative's current trajectory, permitting, inspection, and interconnection (PII) soft costs are expected to drop from a current cost of $0.17/watt to $0.14/watt by 2020. While the actual cost metrics for utility PII are undetermined, they are real. A survey and interviews conducted by Solar Electric Power Association (SEPA) in 2014 have uncovered utility initiatives to lower the administrative costs of DG interconnection, making the process of connecting to the grid simpler and more transparent for customers.

  12. Carbon nanotube interconnects for IC chips

    E-Print Network [OSTI]

    Anwar Ali, Hashina Parveen

    2006-01-01T23:59:59.000Z

    Carbon nanotubes (CNTs) have been investigated as candidate materials to replace or augment the existing copper-based technologies as interconnects for Integrated Circuit (IC) chips. Being ballistic conductors, CNTs are ...

  13. Carbon nanotube synthesis for integrated circuit interconnects

    E-Print Network [OSTI]

    Nessim, Gilbert Daniel

    2009-01-01T23:59:59.000Z

    Based on their properties, carbon nanotubes (CNTs) have been identified as ideal replacements for copper interconnects in integrated circuits given their higher current density, inertness, and higher resistance to ...

  14. NREL Variability Analysis for the Western Interconnect (Presentation)

    SciTech Connect (OSTI)

    Milligan, M.; Kirby, B.; King, J.

    2011-07-01T23:59:59.000Z

    This presentation investigates the effects of several Energy Imbalance Markets implementations in the Western Interconnect.

  15. Accelerating Fatigue Testing for Cu Ribbon Interconnects (Presentation)

    SciTech Connect (OSTI)

    Bosco, N.; Silverman, T.; Wohlgemuth , J.; Kurtz, S.; Inoue, M.; Sakurai, K.; Shioda, T.; Zenkoh, H.; Miyashita, M.; Tadanori, T.; Suzuki, S.

    2013-05-01T23:59:59.000Z

    This presentation describes fatigue experiments and discusses dynamic mechanical loading for Cu ribbon interconnects.

  16. Initial Performance Evaluation of the Cray SeaStar Interconnect Ron Brightwell Kevin Pedretti Keith D. Underwood

    E-Print Network [OSTI]

    Brightwell, Ron

    Initial Performance Evaluation of the Cray SeaStar Interconnect Ron Brightwell Kevin Pedretti Keith supercomputer. The SeaStar was designed specifically to meet the performance and reliability needs of a large-scale, distributed-memory scientific computing platform. In this paper, we present an initial performance evaluation

  17. Energy and Security in Northeast Asia: Proposals for Nuclear Cooperation

    E-Print Network [OSTI]

    Kaneko, Kumao; Suzuki, Atsuyuki; Choi, Jor-Shan; Fei, Edward

    1998-01-01T23:59:59.000Z

    Policy Papers 35-37, Energy and Security in Northeast Asia,regional and global energy and security politics. In PolicyPolicy Paper 24, Energy and Security in Northeast Asia). 2

  18. Balancing cost and reliability in the design of IP backbone using agile optical networking

    E-Print Network [OSTI]

    Fisher, Kathleen

    1 Balancing cost and reliability in the design of IP backbone using agile optical networking Byrav AT&T Labs - Research, Florham Park, NJ 07932, USA Abstract To address the reliability challenges due, providers deploy redundant backbone routers and redundant transport equipment interconnecting these routers

  19. QER- Comment of American Hydrogen Northeast, Inc.

    Broader source: Energy.gov [DOE]

    Dear Sir or Madam, Attached please find the Hydrogen Association and the American Hydrogen Northeast,inc's Comments on the first round of QER review. I wish to thank Secretary Moniz and Senator Reed for attending the Providence hearing and providing this opportunity to submit these comments.

  20. Cruise Report PIRATA Northeast Extension 2013 &

    E-Print Network [OSTI]

    Cruise Report PIRATA Northeast Extension 2013 & AEROSE VIII NOAA Ship Ronald H. Brown RB1301 Higley (NOAA/JISAO) AEROSE: Vernon Morris and Everette Joseph (Howard Univ.), Nick Nalli (NESDIS collaboration between AOML and PMEL in detail. Work performed by the AEROSE team is in a separate document. All

  1. Cruise Report PIRATA Northeast Extension 2013b &

    E-Print Network [OSTI]

    Cruise Report PIRATA Northeast Extension 2013b & AEROSE IX NOAA Ship Ronald H. Brown RB-13 (NOAA/PMEL). AEROSE: Vernon Morris (Howard Univ.), Everette Joseph (Howard Univ.), Nicholas Nalli (NOAA agreement between AOML and PMEL and is funded by NOAA's Climate Program Office. Work performed by the AEROSE

  2. Accelerating Fatigue Testing for Cu Ribbon Interconnects

    Broader source: Energy.gov [DOE]

    Presented at the 2013 Photovoltaic Module Reliability Workshop; 26-27 February 2013; Denver, Colorado

  3. Planarization of metal films for multilevel interconnects

    DOE Patents [OSTI]

    Tuckerman, David B. (Livermore, CA)

    1987-01-01T23:59:59.000Z

    In the fabrication of multilevel integrated circuits, each metal layer is anarized by heating to momentarily melt the layer. The layer is melted by sweeping laser pulses of suitable width, typically about 1 microsecond duration, over the layer in small increments. The planarization of each metal layer eliminates irregular and discontinuous conditions between successive layers. The planarization method is particularly applicable to circuits having ground or power planes and allows for multilevel interconnects. Dielectric layers can also be planarized to produce a fully planar multilevel interconnect structure. The method is useful for the fabrication of VLSI circuits, particularly for wafer-scale integration.

  4. Planarization of metal films for multilevel interconnects

    DOE Patents [OSTI]

    Tuckerman, D.B.

    1985-06-24T23:59:59.000Z

    In the fabrication of multilevel integrated circuits, each metal layer is planarized by heating to momentarily melt the layer. The layer is melted by sweeping lase pulses of suitable width, typically about 1 microsecond duration, over the layer in small increments. The planarization of each metal layer eliminates irregular and discontinuous conditions between successive layers. The planarization method is particularly applicable to circuits having ground or power planes and allows for multilevel interconnects. Dielectric layers can also be planarized to produce a fully planar multilevel interconnect structure. The method is useful for the fabrication of VLSI circuits, particularly for wafer-scale integration.

  5. Planarization of metal films for multilevel interconnects

    DOE Patents [OSTI]

    Tuckerman, D.B.

    1985-08-23T23:59:59.000Z

    In the fabrication of multilevel integrated circuits, each metal layer is planarized by heating to momentarily melt the layer. The layer is melted by sweeping laser pulses of suitable width, typically about 1 microsecond duration, over the layer in small increments. The planarization of each metal layer eliminates irregular and discontinuous conditions between successive layers. The planarization method is particularly applicable to circuits having ground or power planes and allows for multilevel interconnects. Dielectric layers can also be planarized to produce a fully planar multilevel interconnect structure. The method is useful for the fabrication of VLSI circuits, particularly for wafer-scale integration.

  6. Planarization of metal films for multilevel interconnects

    DOE Patents [OSTI]

    Tuckerman, D.B.

    1989-03-21T23:59:59.000Z

    In the fabrication of multilevel integrated circuits, each metal layer is planarized by heating to momentarily melt the layer. The layer is melted by sweeping laser pulses of suitable width, typically about 1 microsecond duration, over the layer in small increments. The planarization of each metal layer eliminates irregular and discontinuous conditions between successive layers. The planarization method is particularly applicable to circuits having ground or power planes and allows for multilevel interconnects. Dielectric layers can also be planarized to produce a fully planar multilevel interconnect structure. The method is useful for the fabrication of VLSI circuits, particularly for wafer-scale integration. 6 figs.

  7. Planarization of metal films for multilevel interconnects

    DOE Patents [OSTI]

    Tuckerman, David B. (Livermore, CA)

    1989-01-01T23:59:59.000Z

    In the fabrication of multilevel integrated circuits, each metal layer is anarized by heating to momentarily melt the layer. The layer is melted by sweeping laser pulses of suitable width, typically about 1 microsecond duration, over the layer in small increments. The planarization of each metal layer eliminates irregular and discontinuous conditions between successive layers. The planarization method is particularly applicable to circuits having ground or power planes and allows for multilevel interconnects. Dielectric layers can also be planarized to produce a fully planar multilevel interconnect structure. The method is useful for the fabrication of VLSI circuits, particularly for wafer-scale integration.

  8. Interconnect assembly for an electronic assembly and assembly method therefor

    DOE Patents [OSTI]

    Gerbsch, Erich William

    2003-06-10T23:59:59.000Z

    An interconnect assembly and method for a semiconductor device, in which the interconnect assembly can be used in lieu of wirebond connections to form an electronic assembly. The interconnect assembly includes first and second interconnect members. The first interconnect member has a first surface with a first contact and a second surface with a second contact electrically connected to the first contact, while the second interconnect member has a flexible finger contacting the second contact of the first interconnect member. The first interconnect member is adapted to be aligned and registered with a semiconductor device having a contact on a first surface thereof, so that the first contact of the first interconnect member electrically contacts the contact of the semiconductor device. Consequently, the assembly method does not require any wirebonds, but instead merely entails aligning and registering the first interconnect member with the semiconductor device so that the contacts of the first interconnect member and the semiconductor device make electrically contact, and then contacting the second contact of the first interconnect member with the flexible finger of the second interconnect member.

  9. Load Response Fundamentally Matches Power System Reliability Requirements

    SciTech Connect (OSTI)

    Kirby, Brendan J [ORNL] [ORNL

    2007-01-01T23:59:59.000Z

    Responsive load is the most underutilized reliability resource available to the power system. Loads are frequently barred from providing the highest value and most critical reliability services; regulation and spinning reserve. Advances in communications and control technology now make it possible for some loads to provide both of these services. The limited storage incorporated in some loads better matches their response capabilities to the fast reliability-service markets than to the hourly energy markets. Responsive loads are frequently significantly faster and more accurate than generators, increasing power system reliability. Incorporating fast load response into microgrids further extends the reliability response capabilities that can be offered to the interconnected power system. The paper discusses the desired reliability responses, why this matches some loads' capabilities, what the advantages are for the power system, implications for communications and monitoring requirements, and how this resource can be exploited.

  10. U.S. Geothermal Signs Interconnection Agreement for Neal Hot...

    Open Energy Info (EERE)

    Signs Interconnection Agreement for Neal Hot Springs Power Project Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: U.S. Geothermal Signs Interconnection...

  11. subcollector Schottky collector contact & interconnect metals

    E-Print Network [OSTI]

    Rodwell, Mark J. W.

    base collector depletion layer subcollector ohmic metal (a) base collector depletion layer Schottky metal base emitter collector collector We emitter base emitter emitter We Wc Wc (b) Schottky collector contact & interconnect metals Emitter & collector Ohmics undoped collector depletion layer base N

  12. Asynchronous intrusion recovery for interconnected web services

    E-Print Network [OSTI]

    Sabatini, David M.

    Asynchronous intrusion recovery for interconnected web services Ramesh Chandra, Taesoo Kim, and tracking down and recovering from such an attack re- quires significant manual effort. Web services for such web services. Aire addresses several challenges, such as propagating repair across services when some

  13. Interconnected hydro-thermal systems Models, methods, and applications

    E-Print Network [OSTI]

    Interconnected hydro-thermal systems Models, methods, and applications Magnus Hindsberger Kgs. Lyngby 2003 IMM-PHD-2003-112 Interconnected hydro-thermalsystems #12;Technical University of Denmark 45882673 reception@imm.dtu.dk www.imm.dtu.dk IMM-PHD-2003-112 ISSN 0909-3192 #12;Interconnected hydro

  14. Flip chip electrical interconnection by selective electroplating and bonding

    E-Print Network [OSTI]

    Lin, Liwei

    the interconnection and device substrates to en- hance the ion diffusion during the final electroplating and bondingFlip chip electrical interconnection by selective electroplating and bonding L.-W. Pan, P. Yuen, L of flip-chip, selective elec- troplating and bonding. The electrical interconnection lines are built

  15. CREATING THE NORTHEAST GASOLINE SUPPLY RESERVE

    Broader source: Energy.gov [DOE]

    In 2012, Superstorm Sandy made landfall in the northeastern United States and caused heavy damage to two refineries and left more than 40 terminals in New York Harbor closed due to water damage and loss of power. This left some New York gas stations without fuel for as long as 30 days. As part of the Obama Administration’s ongoing response to the storm, the Department of Energy created the first federal regional refined product reserve, the Northeast Gasoline Supply Reserve.

  16. Part-Time Farming in Northeast Texas.

    E-Print Network [OSTI]

    Martin, James R.; Southern, John H.

    1961-01-01T23:59:59.000Z

    JANUARY THE AGRICULTURAL AND MECHANICAL COLLEGE OF TEXAS TEXAS AGRICULTURAL EXPERIMENT STATION R. D. LEWIS, DIRECTOR, COLLEGE STATION. TEXAS IN COOPERATION WITH THE U. S. DEPARTMENT OF AGRICULTURE 632320 - This analysis of part-the farming... is part of a broad the income levels, income sources and farm and human patterns of the.88,W rural o area of Northeast Texas (Tearas Agricultural Bulletin 940, Incomes of Rural Families in No A major farm adjustmen part-time farming, or a greater...

  17. February 12, 2013 Northeast Blizzard Situation Report

    Broader source: Energy.gov [DOE]

    The Office of Electricity Delivery and Energy Reliability issues public Situation Reports during large scale energy emergencies.

  18. alagoas northeast brazil: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    drought in Cear, Northeast Brazil. Here, forecasts have been directed towards small scale, rainfed agriculturalists as well as state and local level policymakers in the areas...

  19. Data report for the Northeast Residential Experiment Station, November 1981

    SciTech Connect (OSTI)

    Russell, M.C.; Raghuraman, P.; Mahoney, P.C.

    1981-12-01T23:59:59.000Z

    Physical performance data for the month of November 1981 obtained from photovoltaic energy systems under test at the Northeast Residential Experiment Station in Concord, Massachusetts are tabulated.

  20. area northeast japan: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    short-period stations in Japan allows a detailed Sambridge, Malcolm 13 A Probabilistic Seismic Hazard Analysis of Northeast India Engineering Websites Summary: A Probabilistic...

  1. Energy and Security in Northeast Asia: Proposals for Nuclear Cooperation

    E-Print Network [OSTI]

    Kaneko, Kumao; Suzuki, Atsuyuki; Choi, Jor-Shan; Fei, Edward

    1998-01-01T23:59:59.000Z

    Henry S. Rowen, "Nuclear Energy and Nuclear Proliferation -present East Asian national nuclear energy programs. WithoutNortheast Asian nuclear energy cooperation advanced by

  2. agostinho pernambuco northeast: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Data from several trenches at the Sigman site, northeast Arkansas, suggest that the liquefaction at this site likely... Noonan, Brian James 2012-06-07 106 Intercity passenger...

  3. Direct-Current Resistivity Survey At Mauna Loa Northeast Rift...

    Open Energy Info (EERE)

    Mauna Loa Northeast Rift Area (Thomas, 1986) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Direct-Current Resistivity Survey At Mauna Loa...

  4. Interconnection of bundled solid oxide fuel cells

    DOE Patents [OSTI]

    Brown, Michael; Bessette, II, Norman F; Litka, Anthony F; Schmidt, Douglas S

    2014-01-14T23:59:59.000Z

    A system and method for electrically interconnecting a plurality of fuel cells to provide dense packing of the fuel cells. Each one of the plurality of fuel cells has a plurality of discrete electrical connection points along an outer surface. Electrical connections are made directly between the discrete electrical connection points of adjacent fuel cells so that the fuel cells can be packed more densely. Fuel cells have at least one outer electrode and at least one discrete interconnection to an inner electrode, wherein the outer electrode is one of a cathode and and anode and wherein the inner electrode is the other of the cathode and the anode. In tubular solid oxide fuel cells the discrete electrical connection points are spaced along the length of the fuel cell.

  5. Release Resistant Electrical Interconnections For Mems Devices

    DOE Patents [OSTI]

    Peterson, Kenneth A. (Albuquerque, NM); Garrett, Stephen E. (Albuquerque, NM); Reber, Cathleen A. (Corrales, NM)

    2005-02-22T23:59:59.000Z

    A release resistant electrical interconnection comprising a gold-based electrical conductor compression bonded directly to a highly-doped polysilicon bonding pad in a MEMS, IMEMS, or MOEMS device, without using any intermediate layers of aluminum, titanium, solder, or conductive adhesive disposed in-between the conductor and polysilicon pad. After the initial compression bond has been formed, subsequent heat treatment of the joint above 363 C creates a liquid eutectic phase at the bondline comprising gold plus approximately 3 wt % silicon, which, upon re-solidification, significantly improves the bond strength by reforming and enhancing the initial bond. This type of electrical interconnection is resistant to chemical attack from acids used for releasing MEMS elements (HF, HCL), thereby enabling the use of a "package-first, release-second" sequence for fabricating MEMS devices. Likewise, the bond strength of an Au--Ge compression bond may be increased by forming a transient liquid eutectic phase comprising Au-12 wt % Ge.

  6. Dynamic Simulation Studies of the Frequency Response of the Three U.S. Interconnections with Increased Wind Generation

    SciTech Connect (OSTI)

    Mackin, Peter; Daschmans, R.; Williams, B.; Haney, B.; Hung, R.; Ellis, J.

    2010-12-20T23:59:59.000Z

    Utility Systems Efficiencies, Inc. was tasked by Lawrence Berkeley National Laboratory (LBNL) to conduct dynamic simulation studies of the three U.S. interconnections (Eastern, Western, and Texas). The simulations were prepared in support of LBNL's project for the Federal Energy Regulatory Commission to study frequency-response-related issues that must be addressed to operate the power system reliably with large amounts of variable renewable generation. The objective of the simulation studies of each interconnection was to assess the effects of different amounts of wind generation on frequency behavior of each interconnection following a sudden loss of generation. The scenarios created to study these effects considered an operating circumstance in which system load is at or close to its minimum. The event studied was the sudden loss of the largest amount of generation recorded within each interconnection. The simulations calculated the impact of this event on interconnection frequency for three levels of wind generation. In addition to varying the amount of wind generation, the simulations varied the amount of operating reserves between a high level representative of current operating practices and a low level representative of the minimum required by present operating rules.

  7. Energy and Security in Northeast Asia: Supply and Demand, Conflict and

    E-Print Network [OSTI]

    Fesharaki, Fereidun; Banaszak, Sarah; WU, Kang; Valencia, Mark J.; Dorian, James P.

    1998-01-01T23:59:59.000Z

    Energy and Security in Northeast Asia: Supply and Demand,Policy Papers 35- 37, Energy and Security in Northeast Asia,on Northeast Asian energy and security held in Seoul, Korea.

  8. Incomes of Rural Families in Northeast Texas.

    E-Print Network [OSTI]

    Southern, John H.; Hendrix, W. E.

    1959-01-01T23:59:59.000Z

    Summary i This study deals on a sample basis with the income levels, income sources and farm and human re- source characteristics of the 88,000 rural open-country families in a 24-county area of Northeast Texas. ) Low levels of living... mainly from small-scale crop to s~all- scale livestock farming. In 1955, 49,000 of the area's rural families were farm families and 39,000 were nonfarm families, or 55 percent and 45 percent, respectively. However, 21 percent of all farmers were full...

  9. Looking northeast over the ITER construction site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |Is Your HomeLatestCenterLogging inLooking northeast over the ITER

  10. Northeast Biodiesel Company LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |JilinLuOpenNorth America Drilling FluidsNorth Western ElecNortheast

  11. Northeast Missouri Grain LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |JilinLuOpenNorth America Drilling FluidsNorth WesternNortheast

  12. Reliability-Centered Maintenance

    Broader source: Energy.gov [DOE]

    Reliability-centered maintenance leverages the same practices and technologies of predictive maintenance.

  13. Assessment of Industrial Load for Demand Response across Western Interconnect

    SciTech Connect (OSTI)

    Alkadi, Nasr E [ORNL; Starke, Michael R [ORNL; Ma, Ookie [United States Department of Energy (DOE), Office of Efficiency and Renewable Energy (EERE)

    2013-11-01T23:59:59.000Z

    Demand response (DR) has the ability to both increase power grid reliability and potentially reduce operating system costs. Understanding the role of demand response in grid modeling has been difficult due to complex nature of the load characteristics compared to the modeled generation and the variation in load types. This is particularly true of industrial loads, where hundreds of different industries exist with varying availability for demand response. We present a framework considering industrial loads for the development of availability profiles that can provide more regional understanding and can be inserted into analysis software for further study. The developed framework utilizes a number of different informational resources, algorithms, and real-world measurements to perform a bottom-up approach in the development of a new database with representation of the potential demand response resource in the industrial sector across the U.S. This tool houses statistical values of energy and demand response (DR) potential by industrial plant and geospatially locates the information for aggregation for different territories without proprietary information. This report will discuss this framework and the analyzed quantities of demand response for Western Interconnect (WI) in support of evaluation of the cost production modeling with power grid modeling efforts of demand response.

  14. Real Time Grid Reliability Management 2005

    E-Print Network [OSTI]

    Eto, Joe

    2008-01-01T23:59:59.000Z

    California, Mexico. 15. US Western Interconnection BlackoutMexico Border, and via the SONGS 230kV switchyard – SDG&E’s only direct interconnection

  15. Northeast Oregon Hatchery Project, Final Siting Report.

    SciTech Connect (OSTI)

    Watson, Montgomery

    1995-03-01T23:59:59.000Z

    This report presents the results of site analysis for the Bonneville Power Administration Northeast Oregon Hatchery Project. The purpose of this project is to provide engineering services for the siting and conceptual design of hatchery facilities for the Bonneville Power Administration. The hatchery project consists of artificial production facilities for salmon and steelhead to enhance production in three adjacent tributaries to the Columbia River in northeast Oregon: the Grande Ronde, Walla Walla, and Imnaha River drainage basins. Facilities identified in the master plan include adult capture and holding facilities; spawning incubation, and early rearing facilities; full-term rearing facilities; and direct release or acclimation facilities. The evaluation includes consideration of a main production facility for one or more of the basins or several smaller satellite production facilities to be located within major subbasins. The historic and current distribution of spring and fall chinook salmon and steelhead was summarized for the Columbia River tributaries. Current and future production and release objectives were reviewed. Among the three tributaries, forty seven sites were evaluated and compared to facility requirements for water and space. Site screening was conducted to identify the sites with the most potential for facility development. Alternative sites were selected for conceptual design of each facility type. A proposed program for adult holding facilities, final rearing/acclimation, and direct release facilities was developed.

  16. Reactive power interconnection requirements for PV and wind plants : recommendations to NERC.

    SciTech Connect (OSTI)

    McDowell, Jason (General Electric, Schenectady, NY); Walling, Reigh (General Electric, Schenectady, NY); Peter, William (SunPower, Richmond, CA); Von Engeln, Edi (NV Energy, Reno, NV); Seymour, Eric (AEI, Fort Collins, CO); Nelson, Robert (Siemens Wind Turbines, Orlando, FL); Casey, Leo (Satcon, Boston, MA); Ellis, Abraham; Barker, Chris. (SunPower, Richmond, CA)

    2012-02-01T23:59:59.000Z

    Voltage on the North American bulk system is normally regulated by synchronous generators, which typically are provided with voltage schedules by transmission system operators. In the past, variable generation plants were considered very small relative to conventional generating units, and were characteristically either induction generator (wind) or line-commutated inverters (photovoltaic) that have no inherent voltage regulation capability. However, the growing level of penetration of non-traditional renewable generation - especially wind and solar - has led to the need for renewable generation to contribute more significantly to power system voltage control and reactive power capacity. Modern wind-turbine generators, and increasingly PV inverters as well, have considerable dynamic reactive power capability, which can be further enhanced with other reactive support equipment at the plant level to meet interconnection requirements. This report contains a set of recommendations to the North-America Electricity Reliability Corporation (NERC) as part of Task 1-3 (interconnection requirements) of the Integration of Variable Generation Task Force (IVGTF) work plan. The report discusses reactive capability of different generator technologies, reviews existing reactive power standards, and provides specific recommendations to improve existing interconnection standards.

  17. Development of Ceramic Interconnect Materials for SOFC

    SciTech Connect (OSTI)

    Yoon, Kyung J.; Stevenson, Jeffry W.; Marina, Olga A.

    2010-08-05T23:59:59.000Z

    Currently, acceptor-doped lanthanum chromite is the state-of-the-art ceramic interconnect material for high temperature solid oxide fuel cells (SOFCs) due to its fairly good electronic conductivity and chemical stability in both oxidizing and reducing atmospheres, and thermal compatibility with other cell components. The major challenge for acceptor-doped lanthanum chromite for SOFC interconnect applications is its inferior sintering behavior in air, which has been attributed to the development of a thin layer of Cr2O3 at the interparticle necks during the initial stages of sintering. In addition, lanthanum chromite is reactive with YSZ electrolyte at high temperatures, forming a highly resistive lanthanum zirconate phase (La2Zr2O7), which further complicates co-firing processes. Acceptor-doped yttrium chromite is considered to be one of the promising alternatives to acceptor-doped lanthanum chromite because it is more stable with respect to the formation of hydroxides in SOFC operating conditions, and the formation of impurity phases can be effectively avoided at co-firing temperatures. In addition, calcium-doped yttrium chromite exhibits higher mechanical strength than lanthanum chromite-based materials. The major drawback of yttrium chromite is considered to be its lower electrical conductivity than lanthanum chromite. The properties of yttrium chromites could possibly be improved and optimized by partial substitution of chromium with various transition metals. During FY10, PNNL investigated the effect of various transition metal doping on chemical stability, sintering and thermal expansion behavior, microstructure, electronic and ionic conductivity, and chemical compatibility with other cell components to develop the optimized ceramic interconnect material.

  18. Data integrity for on-chip interconnects

    E-Print Network [OSTI]

    Singhal, Rohit

    2007-09-17T23:59:59.000Z

    -Chairs of Committee, Rabi Mahapatra Gwan Choi Committee Members, Duncan M. Walker Eun Jung Kim Jiang Hu Madhav Pappu Head of Department, Valerie Taylor May 2007 Major Subject: Computer Science iii ABSTRACT Data Integrity for On-Chip Interconnects. (May 2007) Rohit... Singhal, B. Tech., Indian Institute of Technology; M.S., Texas A&M University Co{Chairs of Advisory Committee: Dr. Rabi Mahapatra Dr. Gwan Choi With shrinking feature size and growing integration density in the Deep Sub- Micron (DSM) technologies...

  19. Repairable chip bonding/interconnect process

    DOE Patents [OSTI]

    Bernhardt, Anthony F. (Berkeley, CA); Contolini, Robert J. (Livermore, CA); Malba, Vincent (Livermore, CA); Riddle, Robert A. (Tracy, CA)

    1997-01-01T23:59:59.000Z

    A repairable, chip-to-board interconnect process which addresses cost and testability issues in the multi-chip modules. This process can be carried out using a chip-on-sacrificial-substrate technique, involving laser processing. This process avoids the curing/solvent evolution problems encountered in prior approaches, as well is resolving prior plating problems and the requirements for fillets. For repairable high speed chip-to-board connection, transmission lines can be formed on the sides of the chip from chip bond pads, ending in a gull wing at the bottom of the chip for subsequent solder.

  20. Repairable chip bonding/interconnect process

    DOE Patents [OSTI]

    Bernhardt, A.F.; Contolini, R.J.; Malba, V.; Riddle, R.A.

    1997-08-05T23:59:59.000Z

    A repairable, chip-to-board interconnect process which addresses cost and testability issues in the multi-chip modules is disclosed. This process can be carried out using a chip-on-sacrificial-substrate technique, involving laser processing. This process avoids the curing/solvent evolution problems encountered in prior approaches, as well is resolving prior plating problems and the requirements for fillets. For repairable high speed chip-to-board connection, transmission lines can be formed on the sides of the chip from chip bond pads, ending in a gull wing at the bottom of the chip for subsequent solder. 10 figs.

  1. Environmental Regulation Impacts on Eastern Interconnection Performance

    SciTech Connect (OSTI)

    Markham, Penn N [ORNL; Liu, Yilu [ORNL; Young II, Marcus Aaron [ORNL

    2013-07-01T23:59:59.000Z

    In the United States, recent environmental regulations will likely result in the removal of nearly 30 GW of oil and coal-fired generation from the power grid, mostly in the Eastern Interconnection (EI). The effects of this transition on voltage stability and transmission line flows have previously not been studied from a system-wide perspective. This report discusses the results of power flow studies designed to simulate the evolution of the EI over the next few years as traditional generation sources are replaced with environmentally friendlier ones such as natural gas and wind.

  2. Interconnecting gold islands with DNA origami

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes | National Nuclear SecurityIntellectualInterconnecting gold islands

  3. Impact of High Solar Penetration in the Western Interconnection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Impact of High Solar Penetration in the Western Interconnection Debra Lew National Renewable Energy Laboratory Nicholas Miller, Kara Clark, Gary Jordan, and Zhi Gao GE Energy...

  4. EA-1989: Cliffrose Solar Energy Interconnection Project, Mohave...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Area Power Administration (Western) is preparing an EA that will assess the potential environmental impacts of interconnecting the proposed Cliffrose Solar Energy Project in...

  5. Utility Wind Integration Group Distributed Wind/Solar Interconnection Workshop

    Broader source: Energy.gov [DOE]

    This two-day workshop will answer your questions about interconnecting wind and solar plants and other distributed generation applications to electric distribution systems while providing insight...

  6. Proposed rule for Interconnection for Wind Energy and Other Alternativ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ENERGY REGULATORY COMMISSION 18 CFR Part 35 (Docket No. RM05-4-000) Interconnection for Wind Energy and Other Alternative Technologies (January 24, 2005) AGENCY: Federal Energy...

  7. Microgrid V2G Charging Station Interconnection Testing (Presentation)

    SciTech Connect (OSTI)

    Simpson, M.

    2013-07-01T23:59:59.000Z

    This presentation by Mike Simpson of the National Renewable Energy Laboratory (NREL) describes NREL's microgrid vehicle-to-grid charging station interconnection testing.

  8. Pepco and PJM Interconnection Comments on District of Columbia...

    Energy Savers [EERE]

    Pepco and PJM Interconnection Comments on District of Columbia Public Service Commission, Docket No. EO-05-01 Comments and Answer to Requests for Rehearing Pepco and PJM...

  9. Response from PJM Interconnection LLC and Pepco to Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PJM Interconnection LLC and Pepco to Department of Energy Request for Information Concerning the Potential Need for Potomac River Station Generation Response from PJM...

  10. Integrated Energy-Water Planning in the Western and Texas Interconnections

    SciTech Connect (OSTI)

    Vincent Tidwell; John Gasper; Robert Goldstein; Jordan Macknick; Gerald Sehlke; Michael Webber; Mark Wigmosta

    2013-07-01T23:59:59.000Z

    While long-term regional electricity transmission planning has traditionally focused on cost, infrastructure utilization, and reliability, issues concerning the availability of water represent an emerging issue. Thermoelectric expansion must be considered in the context of competing demands from other water use sectors balanced with fresh and non-fresh water supplies subject to climate variability. An integrated Energy-Water Decision Support System (DSS) is being developed that will enable planners in the Western and Texas Interconnections to analyze the potential implications of water availability and cost for long-range transmission planning. The project brings together electric transmission planners (Western Electricity Coordinating Council and Electric Reliability Council of Texas) with western water planners (Western Governors’ Association and the Western States Water Council). This paper lays out the basic framework for this integrated Energy-Water DSS.

  11. Power electronics reliability analysis.

    SciTech Connect (OSTI)

    Smith, Mark A.; Atcitty, Stanley

    2009-12-01T23:59:59.000Z

    This report provides the DOE and industry with a general process for analyzing power electronics reliability. The analysis can help with understanding the main causes of failures, downtime, and cost and how to reduce them. One approach is to collect field maintenance data and use it directly to calculate reliability metrics related to each cause. Another approach is to model the functional structure of the equipment using a fault tree to derive system reliability from component reliability. Analysis of a fictitious device demonstrates the latter process. Optimization can use the resulting baseline model to decide how to improve reliability and/or lower costs. It is recommended that both electric utilities and equipment manufacturers make provisions to collect and share data in order to lay the groundwork for improving reliability into the future. Reliability analysis helps guide reliability improvements in hardware and software technology including condition monitoring and prognostics and health management.

  12. Human Reliability Program Overview

    SciTech Connect (OSTI)

    Bodin, Michael

    2012-09-25T23:59:59.000Z

    This presentation covers the high points of the Human Reliability Program, including certification/decertification, critical positions, due process, organizational structure, program components, personnel security, an overview of the US DOE reliability program, retirees and academia, and security program integration.

  13. INTEGRATING THE DESIGN AND RELIABILITY ASSESSMENT OF A HYBRID PV-THERMAL MICROCONCENTRATOR SYSTEM

    E-Print Network [OSTI]

    , concentrator receivers and modules are composed of many different materials that encapsulate, electrically interconnect, and heat-sink the solar cells. Many of these materials come from the power electronics industry. Although they are reliable in their original field of application, they might fail when included in a solar

  14. Study of Internet autonomous system interconnectivity from BGP routing tables

    E-Print Network [OSTI]

    Catalunya, Universitat Politčcnica de

    Study of Internet autonomous system interconnectivity from BGP routing tables Jose M. Barcelo ISPs (Internet Service Providers) and to interconnect enterprises to ISPs. ISPs usually are providers University of Baja California (UABC), Mexico. He is a PhD student at UPC, Spain, with a grant of the Mexican

  15. Virtual TCP Offload: Optimizing Ethernet Overlay Performance on Advanced Interconnects

    E-Print Network [OSTI]

    Dinda, Peter A.

    Virtual TCP Offload: Optimizing Ethernet Overlay Performance on Advanced Interconnects Zheng Cui Patrick G. Bridges John R. Lange Peter A. Dinda Department of CS University of New Mexico Albuquerque, NM. Their performance suffers on advanced interconnects such as Infiniband, however, be- cause of differences between

  16. Flocking with Obstacle Avoidance in Switching Networks of Interconnected Vehicles

    E-Print Network [OSTI]

    Tanner, Herbert G.

    Flocking with Obstacle Avoidance in Switching Networks of Interconnected Vehicles Herbert G. Tanner Mechanical Engineering Department University of New Mexico Abstract--The paper introduces a set of nonsmooth- tivity requirements on the interconnection network can be relaxed due to the common objective. I

  17. Simultaneous Interconnection and Damping Assignment PassivityBased Control: Two

    E-Print Network [OSTI]

    Batlle, Carles

    Simultaneous Interconnection and Damping Assignment Passivity­Based Control: Two Practical Examples.doria@upc.edu 2 DEPFI­UNAM, Apartado Postal 70-256, 04510 M´exico D.F., MEXICO, gerardoe@servidor.unam.mx 3 Jd : Rn × R Rn×n , Hd : Rn R, satisfying the skew­symmetry condition for the interconnection matrix

  18. Decentralized symbolic control of interconnected systems with application to

    E-Print Network [OSTI]

    Johansson, Karl Henrik

    Decentralized symbolic control of interconnected systems with application to vehicle platooning A interconnection of continuous nonlinear systems and we address the decentralized design of local controllers funding from the European Union Seventh Framework Programme [FP7/2007-2013] under grant agreement n

  19. Generalized Lyapunov Function for Stability Analysis of Interconnected Power Systems

    E-Print Network [OSTI]

    Pota, Himanshu Roy

    Generalized Lyapunov Function for Stability Analysis of Interconnected Power Systems M. A. Mahmud for formulating generalized Lyapunov function for the stability analysis of interconnected power systems. Lyapunov function is formulated based on the total energy of power system where the system is considered as a single

  20. Solid-state energy storage module employing integrated interconnect board

    DOE Patents [OSTI]

    Rouillard, Jean; Comte, Christophe; Daigle, Dominik; Hagen, Ronald A.; Knudson, Orlin B.; Morin, Andre; Ranger, Michel; Ross, Guy; Rouillard, Roger; St-Germain, Philippe; Sudano, Anthony; Turgeon, Thomas A.

    2004-09-28T23:59:59.000Z

    An electrochemical energy storage device includes a number of solid-state thin-film electrochemical cells which are selectively interconnected in series or parallel through use of an integrated interconnect board. The interconnect board is typically disposed within a sealed housing which also houses the electrochemical cells, and includes a first contact and a second contact respectively coupled to first and second power terminals of the energy storage device. The interconnect board advantageously provides for selective series or parallel connectivity with the electrochemical cells, irrespective of electrochemical cell position within the housing. Fuses and various electrical and electro-mechanical devices, such as bypass, equalization, and communication devices for example, may also be mounted to the interconnect board and selectively connected to the electrochemical cells.

  1. Solid-state energy storage module employing integrated interconnect board

    DOE Patents [OSTI]

    Rouillard, Jean; Comte, Christophe; Daigle, Dominik; Hagen, Ronald A.; Knudson, Orlin B.; Morin, Andre; Ranger, Michel; Ross, Guy; Rouillard, Roger; St-Germain, Philippe; Sudano, Anthony; Turgeon, Thomas A.

    2003-11-04T23:59:59.000Z

    The present invention is directed to an improved electrochemical energy storage device. The electrochemical energy storage device includes a number of solid-state, thin-film electrochemical cells which are selectively interconnected in series or parallel through use of an integrated interconnect board. The interconnect board is typically disposed within a sealed housing which also houses the electrochemical cells, and includes a first contact and a second contact respectively coupled to first and second power terminals of the energy storage device. The interconnect board advantageously provides for selective series or parallel connectivity with the electrochemical cells, irrespective of electrochemical cell position within the housing. Fuses and various electrical and electromechanical devices, such as bypass, equalization, and communication devices for example, may also be mounted to the interconnect board and selectively connected to the electrochemical cells.

  2. , Analysis of U.S. Net Metering and Interconnection Policy

    SciTech Connect (OSTI)

    Haynes, Rusty; Cook, Chris

    2006-07-01T23:59:59.000Z

    Historically, the absence of interconnection standards has been one of the primary barriers to the deployment of distributed generation (DG) in the United States. Although significant progress in the development of interconnection standards was achieved at both the federal and state levels in 2005, interconnection policy and net-metering policy continue to confound regulators, lawmakers, DG businesses, clean-energy advocates and consumers. For this reason it is critical to keep track of developments related to these issues. The North Carolina Solar Center (NCSC) is home to two Interstate Renewable Energy Council (IREC) projects -- the National Interconnection Project and the Database of State Incentives for Renewable Energy (DSIRE). This paper will present the major federal and state level policy developments in interconnection and net metering in 2005 and early 2006. It will also present conclusions based an analysis of data collected by these two projects.

  3. QuantitativeProjections of Reliability and Performance for Low-k/Cu InterconnectSystems

    E-Print Network [OSTI]

    Joule heating (or self-heating) and EM simultaneously. Once a self-consistent temperature (T section, effect of self-heating on EM is briefly discussed followed by an analysis of the self RELIASILITY Influence of Self-Heating on Electromigration well known Black's equation [9] given by, EM

  4. Estimating Reliability and Throughput of Source-synchronous Wave-pipelined Interconnect

    E-Print Network [OSTI]

    Lemieux, Guy

    , we develop a statistical model of dynamic timing uncertainty. We show that it is important to distinguish between static and dynamic sources of tim- ing uncertainty, because source-synchronous wave pipelin- ing is much more sensitive to the latter. We use HSPICE simulations to develop a model for a wave

  5. Northeast United States U.S. Department of Energy Office of Electricity Delivery and Energy Reliability

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of Contamination in ManyDepartment of Energy North

  6. Weather conditions affecting VTOL airbus operations in the Northeast Corridor

    E-Print Network [OSTI]

    Simpson, R. W.

    1966-01-01T23:59:59.000Z

    A detailed study of hourly weather observations in the Northeast Corridor during the periods 0600-2400 for a ten year period 1944-1958 was made to study the implications of weather affecting the operations of a VSTOL Airbus ...

  7. aracaju northeast brazil: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    samples per cycle for PQ data) Solar Energy Testing 12;BNL is developing a new Northeast Solar Energy Research Center (NSERC) on its campus Ohta, Shigemi First Page Previous Page...

  8. Northeast Home Heating Oil Reserve- Online Bidding System

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy has developed an on-line bidding system - an anonymous auction program - for the sale of product from the one million barrel Northeast Home Heating Oil Reserve.

  9. Market power and electricity market reform in Northeast China

    E-Print Network [OSTI]

    Zhang, Xiaochun

    2008-01-01T23:59:59.000Z

    The Northeast region of China has been used as a testing ground for creation of a functioning wholesale electric power market. We describe the ownership structure of the generation assets for those plants participating in ...

  10. area northeast ethiopia: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    located in the western Wabigoon Subprovince of the Archaean Superior Province. It is part 190 Century summertime climate of the Northeast U.S. Anthropogenic-induced changes in...

  11. Wind Power Reliability: Breaking Down a Barrier

    Broader source: Energy.gov [DOE]

    The steady increase of wind power on the grid presents new challenges for power system operators charged with making sure the grid stays up and running. "We need to ensure that we are going down a path that will lead to better reliability [with wind power]," said Bob Zavadil, an executive vice president at EnerNex Corporation in Knoxville, Tenn., a firm specializing in renewable energy grid interconnection and integration. "If this piece isn't done, there will be problems." EnerNex has spent the last decade perfecting wind turbine and plant models that test a wind plant's influence on the grid and its ability to provide grid support. In its latest effort, the company is using American Recovery and Reinvestment Act funds worth $750,000 to develop documentation and validations of computer wind turbine models.

  12. Medical Aspects of Reliability

    SciTech Connect (OSTI)

    Atencio, Julian J.

    2014-05-05T23:59:59.000Z

    This presentation covers the medical evaluation as part of a human reliability program, particularly the various medical qualifications and potential disqualifiers.

  13. Lifetime and Reliability

    Broader source: Energy.gov [DOE]

    A DOE Solid-State Lighting Program technology fact sheet on lifetime, reliability, and failure as related to LED-based products.

  14. Hawaii electric system reliability.

    SciTech Connect (OSTI)

    Silva Monroy, Cesar Augusto; Loose, Verne William

    2012-09-01T23:59:59.000Z

    This report addresses Hawaii electric system reliability issues; greater emphasis is placed on short-term reliability but resource adequacy is reviewed in reference to electric consumers' views of reliability %E2%80%9Cworth%E2%80%9D and the reserve capacity required to deliver that value. The report begins with a description of the Hawaii electric system to the extent permitted by publicly available data. Electrical engineering literature in the area of electric reliability is researched and briefly reviewed. North American Electric Reliability Corporation standards and measures for generation and transmission are reviewed and identified as to their appropriateness for various portions of the electric grid and for application in Hawaii. Analysis of frequency data supplied by the State of Hawaii Public Utilities Commission is presented together with comparison and contrast of performance of each of the systems for two years, 2010 and 2011. Literature tracing the development of reliability economics is reviewed and referenced. A method is explained for integrating system cost with outage cost to determine the optimal resource adequacy given customers' views of the value contributed by reliable electric supply. The report concludes with findings and recommendations for reliability in the State of Hawaii.

  15. Medical Device Reliability BIOMATERIALS

    E-Print Network [OSTI]

    NEMI Medical Electronics team to address short- and long-term reliability issues with medical devices. OurMedical Device Reliability BIOMATERIALS Our goal is to provide medical device manufacturers, and consistency of active implantable medical devices. These devices, including pacemakers, cardiac defibrillators

  16. Fabrication and Characterization of Through-Substrate Interconnects

    E-Print Network [OSTI]

    del Alamo, Jesus A.

    We developed a through-substrate copper-damascene interconnect technology in silicon with minimal impedance. Via impedance was extracted using parameter measurements at 50 GHz that were matched to simple circuit models. ...

  17. Modeling Message Blocking and Deadlock in Interconnection Networks

    E-Print Network [OSTI]

    Pinkston, Timothy M.

    Modeling Message Blocking and Deadlock in Interconnection Networks Sugath Warnakulasuriya. This model allows various types of message blocking to be represented precisely, including deadlock. Our model of deadlock distinguishes between messages involved in deadlock and those simply dependent

  18. Energy scalability of on-chip interconnection networks

    E-Print Network [OSTI]

    Konstantakopoulos, Theodoros K., 1977-

    2007-01-01T23:59:59.000Z

    On-chip interconnection networks (OCN) such as point-to-point networks and buses form the communication backbone in multiprocessor systems-on-a-chip, multicore processors, and tiled processors. OCNs consume significant ...

  19. Advanced Unit Commitment Strategies in the United States Eastern Interconnection

    SciTech Connect (OSTI)

    Meibom, P.; Larsen, H. V.; Barth, R.; Brand, H.; Tuohy, A.; Ela, E.

    2011-08-01T23:59:59.000Z

    This project sought to evaluate the impacts of high wind penetrations on the U.S. Eastern Interconnection and analyze how different unit commitment strategies may affect these impacts.

  20. Interconnecting PV on New York City's Secondary Network Distribution System

    SciTech Connect (OSTI)

    Anderson, K.; Coddington, M.; Burman, K.; Hayter, S.; Kroposki, B.; Watson, A.

    2009-12-01T23:59:59.000Z

    This study describes technical assistance provided by NREL to help New York City and Con Edison improve the interconnection of distributed PV systems on a secondary network distribution system.

  1. Low-Swing Signaling on Monolithically Integrated Global Graphene Interconnects

    E-Print Network [OSTI]

    Lee, Kyeong-Jae

    In this paper, we characterize the performance of monolithically integrated graphene interconnects on a prototype 0.35-?m CMOS chip. The test chip implements an array of transmitter/receivers to analyze the end-to-end data ...

  2. InterConnections A Report on Interdisciplinary Computing at the

    E-Print Network [OSTI]

    Gruner, Daniel S.

    InterConnections A Report on Interdisciplinary Computing at the University of Maryland Institute- gual corpora of parallel texts. In addition to UMIACS, the team includes researchers from New Mexico

  3. Design and analysis of high performance multistage interconnection networks

    E-Print Network [OSTI]

    Bhogavilli, Suresh K

    1993-01-01T23:59:59.000Z

    Small switching elements are the key components of multistage interconnection networks (MINS) used in multiprocessors and in high speed switching fabrics for broad-band communication systems. The structure of their internal buffers, efficient...

  4. Evaluation of phase change materials for reconfigurable interconnects

    E-Print Network [OSTI]

    Khoo, Chee Ying

    2010-01-01T23:59:59.000Z

    The possible use of programmable integrated circuit interconnect vias using an indirectly heated phase change material is evaluated. Process development and materials investigations are examined. Devices capable of multiple ...

  5. Interconnecting PV on NYC's Secondary Network Distribution System

    Broader source: Energy.gov [DOE]

    To assess ways to improve the interconnection process, NREL conducted a four-part study with support from DOE. The NREL team then compiled the final reports from each study into this report.

  6. Photovoltaic Systems Interconnected onto Secondary Network Distribution Systems – Success Stories

    Broader source: Energy.gov [DOE]

    This report examines six case studies of photovoltaic (PV) systems integrated into secondary network systems. The six PV systems were chosen for evaluation because they are interconnected to secondary network systems located in four major Solar America Cities.

  7. An optical data receiver for integrated photonic interconnects

    E-Print Network [OSTI]

    Georgas, Michael S. (Michael Stephen)

    2009-01-01T23:59:59.000Z

    The throughput bounds of traditional interconnect networks in microprocessors are being pushed to their limits. In past single-core processors, the number of long global wires constituted only a small fraction of the total. ...

  8. The hybrid ensemble smoother (HEnS) & noncartesian computational interconnects

    E-Print Network [OSTI]

    Cessna, Joseph B.

    2010-01-01T23:59:59.000Z

    Figure 3.5: A four-node tile can be extracted from thefolded 1D interconnect, a tile may be designed that contains3.10: The three fundamental tiles, denoted E, F , and G,

  9. Solar Energy to Benefit from New FERC Interconnection Procedures...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    from New FERC Interconnection Procedures October 30, 2014 - 5:15pm Addthis As a major win for solar and testament to the impact of DOE SunShot funded research at the national...

  10. On the Optimality and Interconnection of Valiant Load-Balancing Networks

    E-Print Network [OSTI]

    Chuang, John C.-I.

    - terconnection regime evolves over time, as networks negotiate interconnection agreements with one anotherOn the Optimality and Interconnection of Valiant Load-Balancing Networks Moshe Babaioff and John to enable interconnection of multiple VLB networks, and study interconnection via bilateral peering

  11. EA-1990: Ridgenose Solar Energy Interconnection Facility, Mohave County, Arizona

    Broader source: Energy.gov [DOE]

    The EA was cancelled by the applicant.DOE’s Western Area Power Administration (Desert Southwest Region) is preparing an EA that will assess the potential environmental impacts of a proposal to interconnect the planned Ridgenose Solar Energy Project to Western’s transmission system. Western’s actions could include constructing less than a mile of new transmission line from the solar facility to an existing substation, constructing an interconnection substation, and adding, moving, or modifying structures.

  12. Developing Generic Dynamic Models for the 2030 Eastern Interconnection Grid

    SciTech Connect (OSTI)

    Kou, Gefei [ORNL; Hadley, Stanton W [ORNL; Markham, Penn N [ORNL; Liu, Yilu [ORNL

    2013-12-01T23:59:59.000Z

    The Eastern Interconnection Planning Collaborative (EIPC) has built three major power flow cases for the 2030 Eastern Interconnection (EI) based on various levels of energy/environmental policy conditions, technology advances, and load growth. Using the power flow cases, this report documents the process of developing the generic 2030 dynamic models using typical dynamic parameters. The constructed model was validated indirectly using the synchronized phasor measurements by removing the wind generation temporarily.

  13. Solid-state energy storage module employing integrated interconnect board

    DOE Patents [OSTI]

    Rouillard, Jean (Saint-Luc, CA); Comte, Christophe (Montreal, CA); Daigle, Dominik (St-Hyacinthe, CA); Hagen, Ronald A. (Stillwater, MN); Knudson, Orlin B. (Vadnais Heights, MN); Morin, Andre (Longueuil, CA); Ranger, Michel (Lachine, CA); Ross, Guy (Beloeil, CA); Rouillard, Roger (Beloeil, CA); St-Germain, Philippe (Outremont, CA); Sudano, Anthony (Laval, CA); Turgeon, Thomas A. (Fridley, MN)

    2000-01-01T23:59:59.000Z

    The present invention is directed to an improved electrochemical energy storage device. The electrochemical energy storage device includes a number of solid-state, thin-film electrochemical cells which are selectively interconnected in series or parallel through use of an integrated interconnect board. The interconnect board is typically disposed within a sealed housing which also houses the electrochemical cells, and includes a first contact and a second contact respectively coupled to first and second power terminals of the energy storage device. The interconnect board advantageously provides for selective series or parallel connectivity with the electrochemical cells, irrespective of electrochemical cell position within the housing. In one embodiment, a sheet of conductive material is processed by employing a known milling, stamping, or chemical etching technique to include a connection pattern which provides for flexible and selective interconnecting of individual electrochemical cells within the housing, which may be a hermetically sealed housing. Fuses and various electrical and electro-mechanical devices, such as bypass, equalization, and communication devices for example, may also be mounted to the interconnect board and selectively connected to the electrochemical cells.

  14. Photovoltaic system reliability

    SciTech Connect (OSTI)

    Maish, A.B.; Atcitty, C. [Sandia National Labs., NM (United States); Greenberg, D. [Ascension Technology, Inc., Lincoln Center, MA (United States)] [and others

    1997-10-01T23:59:59.000Z

    This paper discusses the reliability of several photovoltaic projects including SMUD`s PV Pioneer project, various projects monitored by Ascension Technology, and the Colorado Parks project. System times-to-failure range from 1 to 16 years, and maintenance costs range from 1 to 16 cents per kilowatt-hour. Factors contributing to the reliability of these systems are discussed, and practices are recommended that can be applied to future projects. This paper also discusses the methodology used to collect and analyze PV system reliability data.

  15. Reliable solar: powering communities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Scienceand Requirements Recently ApprovedReliability Technology earns award ReliabilityReliable

  16. Reliability and Safety

    Broader source: Energy.gov [DOE]

    DOE solar reliability and safety research and development (R&D) focuses on testing photovoltaic (PV) modules, inverters, and systems for long-term performance, and helping investors, consumers,...

  17. Reliability Standards Owner

    Broader source: Energy.gov [DOE]

    This position is located in the Internal Operations and Asset Management group of Planning and Asset Management (TP). A successful candidate in this position will serve as the Reliability Standards...

  18. Interconnection Networks for Scalable Quantum Computers

    E-Print Network [OSTI]

    Nemanja Isailovic; Yatish Patel; Mark Whitney; John Kubiatowicz

    2006-04-07T23:59:59.000Z

    We show that the problem of communication in a quantum computer reduces to constructing reliable quantum channels by distributing high-fidelity EPR pairs. We develop analytical models of the latency, bandwidth, error rate and resource utilization of such channels, and show that 100s of qubits must be distributed to accommodate a single data communication. Next, we show that a grid of teleportation nodes forms a good substrate on which to distribute EPR pairs. We also explore the control requirements for such a network. Finally, we propose a specific routing architecture and simulate the communication patterns of the Quantum Fourier Transform to demonstrate the impact of resource contention.

  19. North and northeast Greenland ice discharge from satellite radar interferometry

    SciTech Connect (OSTI)

    Rignot, E.J. [California Institute of Technology, Pasadena, CA (United States)] [California Institute of Technology, Pasadena, CA (United States); Gogineni, S.P. [Univ. of Kansas, Lawrence, KS (United States)] [Univ. of Kansas, Lawrence, KS (United States); Krabill, W.B. [NASA Goddard Space Flight Center, Wallops Island, VA (United States)] [and others] [NASA Goddard Space Flight Center, Wallops Island, VA (United States); and others

    1997-05-09T23:59:59.000Z

    Ice discharge from north and northeast Greenland calculated from satellite radar interferometry data of 14 outlet glaciers is 3.5 times that estimated from iceberg production. The satellite estimates, obtained at the grounding line of the outlet glaciers, differ from those obtained at the glacier front, because basal melting is extensive at the underside of the floating glacier sections. The results suggest that the north and northeast parts of the Greenland ice sheet may be thinning and contributing positively to sea-level rise. 24 refs., 3 figs., 1 tab.

  20. Northeast Nebraska P P D | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |JilinLuOpenNorth America Drilling FluidsNorth WesternNortheastNortheast

  1. Integrated modelling of water availability and water use in the semi-arid Northeast of Brazil

    E-Print Network [OSTI]

    Bronstert, Axel

    Integrated modelling of water availability and water use in the semi-arid Northeast of Brazil A: Bronstert 1 Integrated modelling of water availability and water use in the semi-arid Northeast of Brazil A con- straint for development in the semi-arid Northeast of Brazil. Quanti cation of natural water

  2. Chironomids as indicators of the Holocene climatic and environmental history of two lakes in Northeast Greenland

    E-Print Network [OSTI]

    Bern, Universität

    in Northeast Greenland STEFFI SCHMIDT, BERND WAGNER, OLIVER HEIRI, MARTIN KLUG, OLE BENNIKE AND MARTIN MELLES as indicators of the Holocene climatic and environmental history of two lakes in Northeast Greenland. Boreas sequences from arctic lakes on Store Koldewey, an island in Northeast Greenland, were investigated

  3. Gearbox Reliability Collaborative Update (Presentation)

    SciTech Connect (OSTI)

    Sheng, S.

    2013-10-01T23:59:59.000Z

    This presentation was given at the Sandia Reliability Workshop in August 2013 and provides information on current statistics, a status update, next steps, and other reliability research and development activities related to the Gearbox Reliability Collaborative.

  4. Sandia Energy - PV Systems Reliability

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Systems Reliability Home Stationary Power Energy Conversion Efficiency Solar Energy Photovoltaics PV Systems Reliability PV Systems ReliabilityCoryne Tasca2015-05-08T03:40:54+00:00...

  5. Understanding the Total Costs of Commercial Fishing in the Northeast

    E-Print Network [OSTI]

    to be done? · 2014-2015: Analyze data collected over the past two years. -cost survey (2 years) -socio Payment/Lay Systems #12;What does the annual cost data get us? · The ability to communicate to decision1 Understanding the Total Costs of Commercial Fishing in the Northeast NEFSC Social Sciences Branch

  6. ACCEPTED MANUSCRIPT Late Holocene paleoenvironmental changes in Northeast Brazil

    E-Print Network [OSTI]

    Brazil recorded by organic matter in lacustrine sediments of Lake Boqueirão. Zocatelli, R, Niterói, Rio de Janeiro, Brazil. f LMI "PALEOTRACES" (Paléoclimatologie tropicale: TRACEurs et Variabilité Northeast Brazil represents a key area in terms of Holocene environmental changes in South America due

  7. Author's personal copy Extension in Mona Passage, Northeast Caribbean

    E-Print Network [OSTI]

    ten Brink, Uri S.

    the volcanically-inactive Greater Antilles arc between Puerto Rico and Hispaniola (Fig. 1), is an area of geodetic data from Hispaniola to the Virgin Islands show that extension in this region continues today, with Puerto Rico moving northeasterly away from Hispaniola at a rate of approximately 5± 3 mm/yr (Jansma

  8. CETACEAN HIGHUSE HABITATS OF THE NORTHEAST UNITED STATES CONTINENTAL SHELF

    E-Print Network [OSTI]

    to offshore oil and gas resource development. Twenty-six species of ceta- ceans were observed during the study of whales, dolphins, and sea turtles inhabiting the northeast shelf for input to decision-making relative species approach to the analysis of such multispecies phenomena has certain limitations. One cannot simply

  9. PIRATA Northeast Extension 2011 / AEROSE-VII Cruise Report

    E-Print Network [OSTI]

    PIRATA Northeast Extension 2011 / AEROSE-VII Cruise Report NOAA Ship Ronald H. Brown RB-11-01 21-AERI: Malgorzata Szczodrak (Univ. Miami) AEROSE: Nick Nalli (NESDIS/STAR); Ebony Roper (Lincoln Univ.); Chris deserve commendation. This work included repairing and rewiring the AEROSE van prior to departure

  10. Photovoltaic module reliability workshop

    SciTech Connect (OSTI)

    Mrig, L. (ed.)

    1990-01-01T23:59:59.000Z

    The paper and presentations compiled in this volume form the Proceedings of the fourth in a series of Workshops sponsored by Solar Energy Research Institute (SERI/DOE) under the general theme of photovoltaic module reliability during the period 1986--1990. The reliability Photo Voltaic (PV) modules/systems is exceedingly important along with the initial cost and efficiency of modules if the PV technology has to make a major impact in the power generation market, and for it to compete with the conventional electricity producing technologies. The reliability of photovoltaic modules has progressed significantly in the last few years as evidenced by warranties available on commercial modules of as long as 12 years. However, there is still need for substantial research and testing required to improve module field reliability to levels of 30 years or more. Several small groups of researchers are involved in this research, development, and monitoring activity around the world. In the US, PV manufacturers, DOE laboratories, electric utilities and others are engaged in the photovoltaic reliability research and testing. This group of researchers and others interested in this field were brought together under SERI/DOE sponsorship to exchange the technical knowledge and field experience as related to current information in this important field. The papers presented here reflect this effort.

  11. Net Metering and Interconnection Procedures-- Incorporating Best Practices

    SciTech Connect (OSTI)

    Jason Keyes, Kevin Fox, Joseph Wiedman, Staff at North Carolina Solar Center

    2009-04-01T23:59:59.000Z

    State utility commissions and utilities themselves are actively developing and revising their procedures for the interconnection and net metering of distributed generation. However, the procedures most often used by regulators and utilities as models have not been updated in the past three years, in which time most of the distributed solar facilities in the United States have been installed. In that period, the Interstate Renewable Energy Council (IREC) has been a participant in more than thirty state utility commission rulemakings regarding interconnection and net metering of distributed generation. With the knowledge gained from this experience, IREC has updated its model procedures to incorporate current best practices. This paper presents the most significant changes made to IREC���¢��������s model interconnection and net metering procedures.

  12. Fan-In Communications On A Cray Gemini Interconnect

    SciTech Connect (OSTI)

    Jones, Terry R [ORNL] [ORNL; Settlemyer, Bradley W [ORNL] [ORNL

    2014-01-01T23:59:59.000Z

    Using the Cray Gemini interconnect as our platform, we present a study of an important class of communication operations the fan-in communication pattern. By its nature, fan-in communications form hot spots that present significant challenges for any interconnect fabric and communication software stack. Yet despite the inherent challenges, these communication patterns are common in both applications (which often perform reductions and other collective operations that include fan-in communication such as barriers) and system software (where they assume an important role within parallel file systems and other components requiring high-bandwidth or low-latency I/O). Our study determines the effectiveness of differing clientserver fan-in strategies. We describe fan-in performance in terms of aggregate bandwidth in the presence of varying degrees of congestion, as well as several other key attributes. Comparison numbers are presented for the Cray Aries interconnect. Finally, we provide recommended communication strategies based on our findings.

  13. ISSAT 2012 KCoverage Reliability Evaluation K-COVERAGE RELIABILITY EVALUATION

    E-Print Network [OSTI]

    Xing, Liudong

    #12;7/20/2012 ISSAT 2012 KCoverage Reliability Evaluation forWSNs 2 Introduction Wireless sensor;7/20/2012 ISSAT 2012 KCoverage Reliability Evaluation forWSNs 7 Model 13 Consider a set of sensor nodes (SN7/20/2012 ISSAT 2012 KCoverage Reliability Evaluation forWSNs 1 K-COVERAGE RELIABILITY EVALUATION

  14. Spintronic switches for ultra low energy global interconnects

    SciTech Connect (OSTI)

    Sharad, Mrigank, E-mail: msharad@purdue.edu; Roy, Kaushik [School of Electrical and Computer Engineering, Purdue University, West Lafayette, Indiana 47907 (United States)

    2014-05-07T23:59:59.000Z

    We present ultra-low energy interconnect design using nano-scale spin-torque (ST) switches for global data-links. Emerging spin-torque phenomena can lead to ultra-low-voltage, high-speed current-mode magnetic-switches. ST-switches can simultaneously provide large trans-impedance gain by employing magnetic tunnel junctions, to convert current-mode signals into large-swing voltage levels. Such device-characteristics can be used in the design of energy-efficient current-mode global interconnects.

  15. Empirical Bayes Estimation of Reliability

    E-Print Network [OSTI]

    Pensky, Marianna

    types of equipment relies on statistical inference about char- acteristics of reliabilityEmpirical Bayes Estimation of Reliability Introduction Assessment of the reliability of various such as reliability function, mean lifetime of the devices, or failure rate. Gen- eral techniques of statistical

  16. Gas Technology Institute and Encorp Inc.: Innovative Interconnection and Control Systems

    SciTech Connect (OSTI)

    Not Available

    2003-01-01T23:59:59.000Z

    Summarizes the work of the Gas Technology Institute and Encorp Inc., under contract to DOEs Distribution and Interconnection R&D, to develop interconnection and control systems for distributed power.

  17. Gas Technology Institute and Encorp Inc.: Innovative Interconnection and Control Systems

    SciTech Connect (OSTI)

    Not Available

    2003-10-01T23:59:59.000Z

    Summarizes the work of the Gas Technology Institute and Encorp Inc., under contract to DOE's Distribution and Interconnection R&D, to develop interconnection and control systems for distributed power.

  18. Vibration control in plates by uniformly distributed PZT actuators interconnected via electric networks

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    improve the performances of piezoelectric actuation. internal resonance / equivalent circuits 1Vibration control in plates by uniformly distributed PZT actuators interconnected via electric vibrations of plates by means of a set of electrically-interconnected piezoelectric actuators is described

  19. Effects of aquifer interconnection resulting from underground coal gasification

    SciTech Connect (OSTI)

    Stone, R.

    1983-09-01T23:59:59.000Z

    Lawrence Livermore National Laboratory evaluated the effects of aquifer interconnection caused by the collapse of cavities formed in coal seams by two small underground coal gasification experiments in the Powder River Basin, Wyoming. Flow models and field measurements were used to show that the water from one or both of the upper aquifers enters the collapse, rubble and flows down to the lowest aquifer (the gasified coal seam) where it flows away from the collapse zones. The investigations showed that the hydraulic conductivity of the collapse rubble is less than that of the aquifers and provides only a moderately permeable interconnection between them, a marked reduction in hydraulic conductivity of the gasified coal seam near the collapse zones restricts the flow in the seam, away from them; changes in the hydraulic head and flow patterns caused by aquifer interconnection extend generally only 60-90 m away from the experiment sites, whereas flow in the uppermost aquifer at one of the sites may be influenced as far away as 122 m. At both sites, the aquifer interconnection allows water from the uppermost (sand) aquifer, which contains the poorest quality water of the 3 aquifers, to enter one or both of the underlying aquifers.

  20. attach interconnection technology: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    attach interconnection technology First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Processing and...

  1. A Holistic Approach to Designing Energy-Efficient Cluster Interconnects

    E-Print Network [OSTI]

    Kim, Eun Jung "EJ"

    , new data centers in the Seattle area are forecast to increase the city's power demands by 25 percentA Holistic Approach to Designing Energy-Efficient Cluster Interconnects Eun Jung Kim, Member, IEEE--Designing energy-efficient clusters has recently become an important concern to make these systems economically

  2. Techniques in the Control of Interconnected Plants Morten Hovd

    E-Print Network [OSTI]

    Skogestad, Sigurd

    Techniques in the Control of Interconnected Plants Morten Hovd Fantoft Prosess Teknostallen N-7030 in modern chemical plants, and the decreased volumes or removal of bu er tanks between processing steps. Thus, disturbances will spread more rapidly and widely throughout a modern chemical plant than in older

  3. Techniques in the Control of Interconnected Plants Morten Hovd \\Lambda

    E-Print Network [OSTI]

    Skogestad, Sigurd

    Techniques in the Control of Interconnected Plants Morten Hovd \\Lambda Fantoft Prosess Teknostallen. This is caused by tighter integration of heat and mass in modern chemical plants, and the decreased volumes (or throughout a modern chemical plant than in older plants. This puts greater demands on the control system

  4. Hermetic aluminum radio frequency interconnection and method for making

    DOE Patents [OSTI]

    Kilgo, Riley D. (Albuquerque, NM); Kovacic, Larry (Albuquerque, NM); Brow, Richard K. (Rolla, MO)

    2000-01-01T23:59:59.000Z

    The present invention provides a light-weight, hermetic coaxial radio-frequency (RF) interconnection having an electrically conductive outer housing made of aluminum or an aluminum alloy, a central electrical conductor made of ferrous or non-ferrous material, and a cylinder of dielectric material comprising a low-melting-temperature, high-thermal-expansion aluminophosphate glass composition for hermetically sealing between the aluminum-alloy outer housing and the ferrous or non-ferrous center conductor. The entire RF interconnection assembly is made permanently hermetic by thermally fusing the center conductor, glass, and housing concurrently by bringing the glass to the melt point by way of exposure to an atmospheric temperature sufficient to melt the glass, less than 540.degree. C., but that does not melt the center conductor or the outer aluminum or aluminum alloy housing. The composition of the glass used is controlled to provide a suitable low dielectric constant so that an appropriate electrical characteristic impedance, for example 50 ohms, can be achieved for an electrical interconnection that performs well at high radio frequencies and also provides an interconnection maintaining a relatively small physical size.

  5. Silicon Micro-Needles with Flexible Interconnections , Y. Hanein1

    E-Print Network [OSTI]

    Department of Zoology, University of Washington, Seattle WA 98195 Abstract - A flexible polyimide to carry elements such as amplifiers, battery or memory. The interconnecting scheme uses two polyimide base and the micro-electrodes, while the polyimide layers provide flexible insulation. The current

  6. High-temperature quenching of electrical resistance in graphene interconnects

    E-Print Network [OSTI]

    assuming a current density j=3.9 MA/cm2 and a resistivity =2.2 cm. The self- heating problem is aggravated scale structures.3,4 One of the approaches to mitigate the self-heating prob- lem is to incorporateHigh-temperature quenching of electrical resistance in graphene interconnects Q. Shao, G. Liu, D

  7. Electric power from offshore wind via synoptic-scale interconnection

    E-Print Network [OSTI]

    Firestone, Jeremy

    Electric power from offshore wind via synoptic-scale interconnection Willett Kemptona,1 , Felipe M regional estimate, Kempton et al. (2) calculated that two-thirds of the offshore wind power off the U in the U.S. Atlantic region is already underway. Fig. 1 shows as black squares offshore wind developments

  8. Dynamic management of water transfer between two interconnected river basins

    E-Print Network [OSTI]

    Boyer, Edmond

    Dynamic management of water transfer between two interconnected river basins Francisco Cabo Katrin cause environmental damage in the donor basin. The recipient faces a trade-off between paying the price of the irrigated soil, or demand for water for highly productive activities like tourism), then the existence

  9. Use of Frequency Response Metrics to Assess the Planning and Operating Requirements for Reliable Integration of Variable Renewable Generation

    SciTech Connect (OSTI)

    Eto, Joseph H.; Undrill, John; Mackin, Peter; Daschmans, Ron; Williams, Ben; Haney, Brian; Hunt, Randall; Ellis, Jeff; Illian, Howard; Martinez, Carlos; O'Malley, Mark; Coughlin, Katie; LaCommare, Kristina Hamachi

    2010-12-20T23:59:59.000Z

    An interconnected electric power system is a complex system that must be operated within a safe frequency range in order to reliably maintain the instantaneous balance between generation and load. This is accomplished by ensuring that adequate resources are available to respond to expected and unexpected imbalances and restoring frequency to its scheduled value in order to ensure uninterrupted electric service to customers. Electrical systems must be flexible enough to reliably operate under a variety of"change" scenarios. System planners and operators must understand how other parts of the system change in response to the initial change, and need tools to manage such changes to ensure reliable operation within the scheduled frequency range. This report presents a systematic approach to identifying metrics that are useful for operating and planning a reliable system with increased amounts of variable renewable generation which builds on existing industry practices for frequency control after unexpected loss of a large amount of generation. The report introduces a set of metrics or tools for measuring the adequacy of frequency response within an interconnection. Based on the concept of the frequency nadir, these metrics take advantage of new information gathering and processing capabilities that system operators are developing for wide-area situational awareness. Primary frequency response is the leading metric that will be used by this report to assess the adequacy of primary frequency control reserves necessary to ensure reliable operation. It measures what is needed to arrest frequency decline (i.e., to establish frequency nadir) at a frequency higher than the highest set point for under-frequency load shedding within an interconnection. These metrics can be used to guide the reliable operation of an interconnection under changing circumstances.

  10. Supplying Baseload Power and Reducing Transmission Requirements by Interconnecting Wind Farms

    E-Print Network [OSTI]

    Supplying Baseload Power and Reducing Transmission Requirements by Interconnecting Wind Farms is not used to supply baseload electric power today. Interconnecting wind farms through the transmission grid farms are interconnected in an array, wind speed correlation among sites decreases and so does

  11. Integration of a waveguide self-electrooptic effect device and a vertically coupled interconnect waveguide

    DOE Patents [OSTI]

    Vawter, G. Allen (Corrales, NM)

    2008-02-26T23:59:59.000Z

    A self-electrooptic effect device ("SEED") is integrated with waveguide interconnects through the use of vertical directional couplers. Light initially propagating in the interconnect waveguide is vertically coupled to the active waveguide layer of the SEED and, if the SEED is in the transparent state, the light is coupled back to the interconnect waveguide.

  12. Wavelength-space permutation switch with coherent PDM QPSK transmission for supercomputer optical interconnects

    E-Print Network [OSTI]

    Vlachos, Kyriakos G.

    Several low-cost, low-latency, high throughput optical interconnect architectures have been proposed interconnects F. Karinou (1), I. Roudas (1), K. Vlachos (1), C. S. Petrou (1), . Vgenis (1), and B. R. Hemenway optical interconnect employing wavelength-space optical packet switching, polarization division

  13. A Design Space Exploration of Transmission-Line Links for On-Chip Interconnect

    E-Print Network [OSTI]

    Huang, Michael C.

    A Design Space Exploration of Transmission-Line Links for On-Chip Interconnect Aaron Carpenter-performance interconnect fabric that is energy-efficient. Well-engineered transmission line-based commu- nication systems and a much better energy profile than a conventional mesh interconnect. Keywords: Transmission Line, On

  14. LFTI: A New Performance Metric for Assessing Interconnect Designs for Extreme-Scale HPC Systems

    E-Print Network [OSTI]

    Pakin, Scott

    , New Mexico Email: {mlang,pakin}@lanl.gov Abstract--Traditionally, interconnect performance is eitherLFTI: A New Performance Metric for Assessing Interconnect Designs for Extreme-Scale HPC Systems Xin a good performance overview for extreme-scale interconnects. The topological pa- rameters

  15. Interconnecting Eyeballs to Content: A Shapley Value Perspective on ISP Peering and Settlement

    E-Print Network [OSTI]

    of these interconnections are often negotiated and maintained via bilateral agreements. Current differences of opinion-peering, bilateral agreements. I. INTRODUCTION The Internet consists of thousands of interconnected ISPs, with each Tier 1 ISPs would willingly all peer with one another, and other interconnection agreements could

  16. Interconnecting Eyeballs to Content: A Shapley Value Perspective on ISP Peering and Settlement

    E-Print Network [OSTI]

    , with each ISP interested in maximizing its own profits. Interconnection agreements, often negotiated Tier 1 ISPs would willingly all peer with one another, and other interconnection agreements couldInterconnecting Eyeballs to Content: A Shapley Value Perspective on ISP Peering and Settlement

  17. 650 IEEE ELECTRON DEVICE LETTERS, VOL. 27, NO. 8, AUGUST 2006 Fully Elastic Interconnects on Nanopatterned

    E-Print Network [OSTI]

    650 IEEE ELECTRON DEVICE LETTERS, VOL. 27, NO. 8, AUGUST 2006 Fully Elastic Interconnects interconnects are re- quired for electronic skin. To date, the resistance of such thin-film interconnects has by only 60%, which is in close agreement with purely geometric deformation. Index Terms

  18. The Northeast heating fuel market: Assessment and options

    SciTech Connect (OSTI)

    None

    2000-07-01T23:59:59.000Z

    In response to a Presidential request, this study examines how the distillate fuel oil market (and related energy markets) in the Northeast behaved in the winter of 1999-2000, explains the role played by residential, commercial, industrial, and electricity generation sector consumers in distillate fuel oil markets and describes how that role is influenced by the structure of tie energy markets in the Northeast. In addition, this report explores the potential for nonresidential users to move away from distillate fuel oil and how this might impact future prices, and discusses conversion of distillate fuel oil users to other fuels over the next 5 years. Because the President's and Secretary's request focused on converting factories and other large-volume users of mostly high-sulfur distillate fuel oil to other fuels, transportation sector use of low-sulfur distillate fuel oil is not examined here.

  19. Power electronics reliability.

    SciTech Connect (OSTI)

    Kaplar, Robert James; Brock, Reinhard C.; Marinella, Matthew; King, Michael Patrick; Stanley, James K.; Smith, Mark A.; Atcitty, Stanley

    2010-10-01T23:59:59.000Z

    The project's goals are: (1) use experiments and modeling to investigate and characterize stress-related failure modes of post-silicon power electronic (PE) devices such as silicon carbide (SiC) and gallium nitride (GaN) switches; and (2) seek opportunities for condition monitoring (CM) and prognostics and health management (PHM) to further enhance the reliability of power electronics devices and equipment. CM - detect anomalies and diagnose problems that require maintenance. PHM - track damage growth, predict time to failure, and manage subsequent maintenance and operations in such a way to optimize overall system utility against cost. The benefits of CM/PHM are: (1) operate power conversion systems in ways that will preclude predicted failures; (2) reduce unscheduled downtime and thereby reduce costs; and (3) pioneering reliability in SiC and GaN.

  20. Human Reliability Program Workshop

    SciTech Connect (OSTI)

    Landers, John; Rogers, Erin; Gerke, Gretchen

    2014-05-18T23:59:59.000Z

    A Human Reliability Program (HRP) is designed to protect national security as well as worker and public safety by continuously evaluating the reliability of those who have access to sensitive materials, facilities, and programs. Some elements of a site HRP include systematic (1) supervisory reviews, (2) medical and psychological assessments, (3) management evaluations, (4) personnel security reviews, and (4) training of HRP staff and critical positions. Over the years of implementing an HRP, the Department of Energy (DOE) has faced various challenges and overcome obstacles. During this 4-day activity, participants will examine programs that mitigate threats to nuclear security and the insider threat to include HRP, Nuclear Security Culture (NSC) Enhancement, and Employee Assistance Programs. The focus will be to develop an understanding of the need for a systematic HRP and to discuss challenges and best practices associated with mitigating the insider threat.

  1. Reliable computation Peter Gacs

    E-Print Network [OSTI]

    Gacs, Peter

    of compressors 28 4.6. Exercises 30 5. The reliable storage problem 32 5.1. Clocked circuits 32 5.2. Storage 34 5.1. Cables 21 4.2. Compressors 23 4.3. Propagating safety 25 4.4. Endgame 26 4.5. The construction.3. Error-correcting codes 35 5.4. Refreshers 39 5.5. Exercises 48 6. Problems 49 7. Historical remarks 51

  2. Interindustry analysis of the economy of Northeast Texas emphasizing agriculture

    E-Print Network [OSTI]

    Lippke, Lawrence Arnold

    1971-01-01T23:59:59.000Z

    of the regional economy of a 23-county area of Northeast Texas in 1967, and to estimate the direct and indirect effects on regional output, income, and employment resulting from changes in final demand in each sector. The input-output technique developed... by Wassily W. Leontier provided the basis for accomplishing the purpose and objectives of this study. Three models were developed and compared Model I was used to describe both the interdependence between sectors and the regional economy as it actually...

  3. Northeast Waste Management Enterprise (NEWME) 1996 annual/final report

    SciTech Connect (OSTI)

    Goland, A.; Kaplan, E. [Brookhaven National Lab., Upton, NY (United States); Palmedo, P. Wortman, J. [Long Island Research Institute, Nesconset, NY (United States)

    1997-10-01T23:59:59.000Z

    The Northeast Waste Management Enterprise was created in response to Dr. Clyde Frank`s vision of a new partnership between research, industrial, and financial sectors, with the goal of speeding development and use (particularly at U.S. Department of Energy [DOE] facilities) of environmental remediation technologies. It was anticipated that this partnership would also strengthen the international competitiveness of the U.S. environmental industry. Brookhaven National Laboratory`s (BNL) response to Dr. Frank was a proposal to create the Northeast Waste Management Alliance, later renamed the Northeast Waste Management Enterprise (NEWME). Recognizing the need to supplement its own technical expertise with acumen in business, financial management, and venture capital development, BNL joined forces with the Long Island Research Institute (LIRI). Since its inception at the end of FY 1993, NEWME has achieved several significant accomplishments in pursuing its original business and strategic plans. However, its successes have been constrained by a fundamental mismatch between the time scales required for technology commercialization, and the immediate need for available environmental technologies of those involved with ongoing environmental remediations at DOE facilities.

  4. Incorporating Demand Response into Western Interconnection Transmission Planning

    E-Print Network [OSTI]

    Satchwell, Andrew

    2014-01-01T23:59:59.000Z

    CISO) in its non-firm load forecasts. We assumed that these programs are dispatched for both reliability

  5. Testing for PV Reliability (Presentation)

    SciTech Connect (OSTI)

    Kurtz, S.; Bansal, S.

    2014-09-01T23:59:59.000Z

    The DOE SUNSHOT workshop is seeking input from the community about PV reliability and how the DOE might address gaps in understanding. This presentation describes the types of testing that are needed for PV reliability and introduces a discussion to identify gaps in our understanding of PV reliability testing.

  6. A Fossilized Opal A To Opal C-T Transformation On The Northeast...

    Open Energy Info (EERE)

    Fossilized Opal A To Opal C-T Transformation On The Northeast Atlantic Margin- Support For A Significantly Elevated Palaeogeothermal Gradient During The Neogene? Jump to:...

  7. Spontaneous synchronization driven by energy transport in interconnected networks

    E-Print Network [OSTI]

    Vincenzo Nicosia; Per Sebastian Skardal; Vito Latora; Alex Arenas

    2015-02-26T23:59:59.000Z

    Understanding dynamical processes on networks is an important area of research in complex systems, with far reaching implications and applications in many real-world cases. Here we introduce and study a model of intertwined dynamics on interconnected networks, inspired by the human brain, which consists of bidirectionally coupled synchronization and energy transport processes. Remarkably, the proposed model allows the emergence of spontaneous switch-like synchronization transitions driven by the energy transport dynamics, which qualitatively mirror the transitions observed in human brain dynamics between resting-state and cognitive activity. We provide a steady-state analytical explanation for the observed behavior and show that the switch-like transition is robust over a wide range of model parameters and network topologies. Finally, we suggest that the complexity inherent in other interconnected dynamical processes might be responsible for various other emergent behaviors observed in natural systems.

  8. Design and analysis of high performance multistage interconnection networks 

    E-Print Network [OSTI]

    Bhogavilli, Suresh K

    1993-01-01T23:59:59.000Z

    Major Subject: Electrical Engineering ABSTRACT Design and Analysis of High Performance Multistage Interconnection Networks. (December 1993) Suresh K. Bhogavilli, B. Tech. , J. N. T. University Chair of Advisory Committee: Dr. Hosame Abu-Amara Small... the next stage buffers are not full. Thus r, = A and this value doesn't change with network size. But this model results in cycle loss, When a packet from the full buffer moves forward, a cycle is lost since it will not allow the packets...

  9. SOFC Interconnect and Compressive Seal Development at PNNL

    SciTech Connect (OSTI)

    Chou, Y S.; Yang, Z Gary; Singh, Prabhakar; Stevenson, Jeffry W.; Xia, Gordon

    2005-11-01T23:59:59.000Z

    The development of solid oxide fuel cell (SOFC) technology represents an opportunity to achieve significant improvements in energy conversion efficiency and reduction of undesirable emissions. However, many technical challenges still need to be overcome before the utilization of the advantages of SOFC can take place. These challenges include the need for improved interconnects and seals for planar SOFC stacks. In this paper, we briefly summarize recent progress at PNNL in these two research areas.

  10. Series interconnected photovoltaic cells and method for making same

    DOE Patents [OSTI]

    Albright, S.P.; Chamberlin, R.R.; Thompson, R.A.

    1995-01-31T23:59:59.000Z

    A novel photovoltaic module and method for constructing the same are disclosed. The module includes a plurality of photovoltaic cells formed on a substrate and laterally separated by interconnection regions. Each cell includes a bottom electrode, a photoactive layer and a top electrode layer. Adjacent cells are connected in electrical series by way of a conductive-buffer line. The buffer line is also useful in protecting the bottom electrode against severing during downstream layer cutting processes. 11 figs.

  11. Assessment of Solder Interconnect Integrity in Dismantled Electronic Components from N57 and B61 Tube-Type Radars

    SciTech Connect (OSTI)

    Rejent, J.A.; Vianco, P.T.; Woodrum, R.A.

    1999-07-01T23:59:59.000Z

    Aging analyses were performed on solder joints from two radar units: (1) a laboratory, N57 tube-type radar unit and (2) a field-returned, B61-0, tube-type radar unit. The cumulative temperature environments experienced by the units during aging were calculated from the intermetallic compound layer thickness and the mean Pb-rich phase particle size metrics for solder joints in the units, assuming an aging time of 35 years for both radars. Baseline aging metrics were obtained from a laboratory test vehicle assembled at AS/FM and T; the aging kinetics of both metrics were calculated from isothermal aging experiments. The N57 radar unit interconnect board solder joints exhibited very little aging. The eyelet solder joints did show cracking that most likely occurred at the time of assembly. The eyelet, SA1126 connector solder joints, showed some delamination between the Cu pad and underlying laminate. The B61 field-returned radar solder joints showed a nominal degree of aging. Cracking of the eyelet solder joints was observed. The Pb-rich phase particle measurements indicated additional aging of the interconnects as a result of residual stresses. Cracking of the terminal pole connector, pin-to-pin solder joint was observed; but it was not believed to jeopardize the electrical functionality of the interconnect. Extending the stockpile lifetime of the B61 tube-type radar by an additional 20 years would not be impacted by the reliability of the solder joints with respect to further growth of the intermetallic compound layer. Additional coarsening of the Pb-rich phase will increase the joints' sensitivity to thermomechanical fatigue.

  12. Contents ISS and Lyapunov functions Input-to-state stability and interconnections Lyapunov functions Simplicial fixed point algor Lyapunov Functions for Interconnected Systems

    E-Print Network [OSTI]

    Hafstein, Sigurđur Freyr

    Contents ISS and Lyapunov functions Input-to-state stability and interconnections Lyapunov functions Simplicial fixed point algor Lyapunov Functions for Interconnected Systems Fabian Wirth Institute of Mathematics, University of W¨urzburg Workshop on Algorithms for Dynamical Systems and Lyapunov Functions

  13. Northeast - NY NJ CT PA Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRoseConcerns Jumpsource History View New PagesRiverNorthborough,Northeast

  14. Mauna Loa Northeast Rift Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRose Bend <Stevens JumpMassachusetts/WindMauna Loa Northeast Rift

  15. Northeast Missouri El Pwr Coop | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |JilinLuOpenNorth America Drilling FluidsNorth WesternNortheast Missouri

  16. Paducah Gaseous Diffusion Plant - GW OU Northeast Plume | Department of

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently Asked QuestionsDepartmentGas and OilGeothermal andofEnergyEnergy Northeast

  17. Northeast - NY NJ CT PA Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer PlantMunhall,Missouri: Energy ResourcesGranby,Plains,Northampton, New York:Ohio:Northeast -

  18. Northeast Aitkin, Minnesota: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer PlantMunhall,Missouri: Energy ResourcesGranby,Plains,Northampton, New York:Ohio:Northeast

  19. Northeast Oklahoma Electric Coop, Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer PlantMunhall,Missouri: Energy ResourcesGranby,Plains,Northampton, NewEnergyNortheast

  20. U.S. Virgin Islands Establishes Interconnection Standards to...

    Office of Environmental Management (EM)

    ensure that the procedure it ultimately adopted would encourage and promote renewable energy development without compromising the safety and reliability of the electricity...

  1. The Younger Dryas cooling in northeast Germany: summer temperature and environmental changes in

    E-Print Network [OSTI]

    Bern, Universität

    The Younger Dryas cooling in northeast Germany: summer temperature and environmental changes, Germany Received 9 December 2011; Revised 7 March 2012; Accepted 9 March 2012 ABSTRACT: A lake sediment record from the Friedla¨nder Grobe Wiese in northeast Germany was studied to reconstruct summer

  2. Hurricane forcing on chlorophyll-a concentration off the northeast coast of the U.S.

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    Hurricane forcing on chlorophyll-a concentration off the northeast coast of the U.S. Ame´lie Davis1] The effect of known physical disturbances caused by hurricanes on chlorophyll-a concentration ([Chl]) is ascertained using remote sensing. This study focuses on all seven hurricanes which affected the northeast (NE

  3. Quaternary Science Reviews 20 (2001) 15611576 Millennial scale climate variability of the northeast Pacific Ocean and

    E-Print Network [OSTI]

    Kurapov, Alexander

    2001-01-01T23:59:59.000Z

    of the northeast Pacific Ocean and northwest North America based on radiolaria and pollen N.G. Pisiasa, *, A in the Northeast Pacific and the northwestern United States. 2. Study region 2.1. Ocean climate and biota.C. Mixa , L. Heusserb a College of Oceanic and Atmospheric Sciences, Oregon State University, 104 Ocean

  4. Distinct compositional thin layers at mid-mantle depths beneath northeast China revealed by the USArray

    E-Print Network [OSTI]

    Niu, Fenglin

    Natural Gas Institute, China University of Petroleum, Beijing, China b Department of Earth Science, RiceDistinct compositional thin layers at mid-mantle depths beneath northeast China revealed crust northeast China USArray a b s t r a c t We observe a clear seismic arrival at $35­45 s after

  5. Distinct compositional thin layers at mid-mantle depths beneath northeast China revealed by the USArray

    E-Print Network [OSTI]

    Niu, Fenglin

    Natural Gas Institute, China University of Petroleum, Beijing, China b Department of Earth Science, RiceDistinct compositional thin layers at mid-mantle depths beneath northeast China revealed February 2013 Keywords: S to P converted wave mid-mantle reflectors subducted oceanic crust northeast China

  6. Mesoscale eddies northeast of the Hawaiian archipelago from satellite altimeter observations

    E-Print Network [OSTI]

    Qiu, Bo

    Mesoscale eddies northeast of the Hawaiian archipelago from satellite altimeter observations; published 16 March 2010. [1] Enhanced mesoscale eddy activity northeast of the Hawaiian archipelago by 5° longitude subregions revealed the dominant mesoscale periods ranging from 90 days near 18°N

  7. Mesoscale distribution of zooplankton biomass in the northeast Atlantic Ocean determined with an Optical Plankton Counter

    E-Print Network [OSTI]

    Mesoscale distribution of zooplankton biomass in the northeast Atlantic Ocean determined Available online 2 June 2009 Keywords: Zooplankton Biomass Size distribution Mesoscale eddies Optical plankton counter Pelagic environment Northeast Atlantic Ocean a b s t r a c t We examined the mesoscale

  8. | | | | |Monday, July 16, 2012 Three Northeast Ohio offshore wind power projects

    E-Print Network [OSTI]

    Rollins, Andrew M.

    | | | | |Monday, July 16, 2012 Home Three Northeast Ohio offshore wind power projects secure federal money By SCOTT SUTTELL 1:52 pm, September 9, 2011 Three Northeast Ohio offshore wind power to "speed technical innovations, lower costs, and shorten the timeline for deploying offshore wind energy

  9. Human Impacts on Seals, Sea Lions, and Sea Otters: Integrating Archaeology and Ecology of the Northeast Pacific

    E-Print Network [OSTI]

    Pierotti, Raymond

    2013-03-07T23:59:59.000Z

    Review of Human Impacts on Seals, Sea Lions, and Sea Otters: Integrating Archaeology and Ecology of the Northeast Pacific.

  10. Systematic study of LPCVD refractory metal/silicide interconnect materials for very large scale integrated circuits

    SciTech Connect (OSTI)

    Nowrozi, M.F.

    1988-01-01T23:59:59.000Z

    Recently, refractory materials have been proposed as a strong alternative to poly-silicon and aluminum alloys as metallization systems for Very Large Scale Integrated (VLSI) circuits because of their improved performance at smaller Integrated Circuit (IC) feature size and higher interconnect current densities. However, processing and reliability problems associated with the use of refractory materials have limited their widespread acceptance. The hot-wall low-pressure chemical vapor deposition (LPCVD) of Mo and W from their respective hexacarbonyl sources has been studied as a potential remedy to such problems, in addition to providing the potential for higher throughput and better step coverage. Using deposition chemistries based on carbonyl sources, Mo and W deposits were characterized with respect to their electrical, mechanical, structural, and chemical properties as well as their compatibility with conventional IC processing. Excellent film step coverage and uniformity were obtained by low-temperature (300-350 C) deposition at pressures of 400-600 mTorr. As-deposited films were observed to be amorphous, with a resistivity of 250 and 350 microohm-cm for Mo and W, respectively.

  11. Northeast Waste Management Alliance (NEWMA). Annual report FY 1993

    SciTech Connect (OSTI)

    Goland, A.N.; Kaplan, E.

    1993-11-01T23:59:59.000Z

    Funding was provided to Brookhaven National Laboratory in the fourth quarter of FY93 to establish a regional alliance as defined by Dr. Clyde Frank during his visit to BNL on March 7, 1993. In collaboration with the Long Island Research Institute (LIRI), BNL developed a business plan for the Northeast Waste Management Alliance (NEWMA). Concurrently, informal discussions were initiated with representatives of the waste management industry, and meetings were held with local and state regulatory and governmental personnel to obtain their enthusiasm and involvement. A subcontract to LIRI was written to enable it to formalize interactions with companies offering new waste management technologies selected for their dual value to the DOE and local governments in the Northeast. LIRI was founded to develop and coordinate economic growth via introduction of new technologies. As a not-for-profit institution it is in an ideal position to manage the development of NEWMA through ready access to venture capital and strong interactions with the business community, universities, and BNL. Another subcontract was written with a professor at SUNY/Stony Brook to perform an evaluation of new pyrolitic processes, some of which may be appropriate for development by NEWMA. Independent endorsement of the business plan recently by another organization, GETF, with broad knowledge of DOE/EM-50 objectives, provides a further incentive for moving rapidly to implement the NEWMA strategy. This report describes progress made during the last quarter of FY93.

  12. Potential market penetration of IGCC in the northeast United States

    SciTech Connect (OSTI)

    Gray, D.; Tomlinson, G.; Hawk, E.; Maskew, J.

    2000-07-01T23:59:59.000Z

    This study examines IGCC market penetration potential for baseload power generation in the Northeast US, an important market area for IGCC because of the existing coal generation infrastructure and its proximity to coal producing regions. Three utility power pools supply most of the power for this region. They are the Pennsylvania, New Jersey, Maryland Power Pool (PJM), the New York Power Pool (NYPP), and the New England Power Exchange (NEPEX). The CONSOL Regional Compliance Model (RCM) was configured to evaluate the power market in the northeast region of the US IGCC was evaluated both as a replacement option for existing power plants and as a new capacity option to satisfy load growth requirements. Using the bus bar cost of electricity as the deciding factor, the RCM considers generation technologies and fuel options to supply power taking into account load projections, emission costs, fuel price projections, plant performance, and capital and operating cost estimates. The emission costs, in the form of a tax or allowance price (or another equivalent mechanism), consider CO{sub 2}, SO{sub 2}, and NO{sub x} emissions.

  13. Mesozoic evolution of northeast African shelf margin, Libya and Egypt

    SciTech Connect (OSTI)

    Aadland, R.K.; Schamel, S.

    1989-03-01T23:59:59.000Z

    The present tectonic features of the northeast African shelf margin between the Nile delta and the Gulf of Sirte are products of (1) precursory late Paleozoic basement arches, (2) early Mesozoic rifting and plate separation, and (3) Late Cretaceous structural inversion. The 250 km-wide and highly differentiated Mesozoic passive margin in the Western Desert region of Egypt is developed above a broad northwest-trending Late Carboniferous basement arch. In northeastern Libya, in contrast, the passive margin is restricted to just the northernmost Cyrenaica platform, where subsidence was extremely rapid in the Jurassic and Early Cretaceous. The boundary between the Western Desert basin and the Cyrenaica platform is controlled by the western flank of the basement arch. In the middle Cretaceous (100-90 Ma), subsidence accelerated over large areas of the Western desert, further enhancing a pattern of east-west-trending subbasins. This phase of rapid subsidence was abruptly ended about 80 Ma by the onset of structural inversion that uplifted the northern Cyrenaica shelf margin and further differentiated the Western Desert subbasin along a northeasterly trend.

  14. Sandia National Laboratories: Inverter Reliability

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in Hosted by Sandia National Laboratories and the Electric Power Research Institute (EPRI) Inverter reliability drives project life cycle costs and plant performance. This...

  15. Sandia National Laboratories: Component Reliability

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in Hosted by Sandia National Laboratories and the Electric Power Research Institute (EPRI) Inverter reliability drives project life cycle costs and plant performance. This...

  16. 2014 Human Reliability Program Workshop

    Broader source: Energy.gov [DOE]

    Announcing The Human Reliability Program Workshop Sponsored by Office of Security (AU-50), U.S Department of Energy In collaboration with NA, NE, EM and SC

  17. Sandia National Laboratories: PV Reliability

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reliability Sandia Research on PV Arc-Fault Detection Submitted for US Patent On March 4, 2015, in Computational Modeling & Simulation, Energy, Facilities, News, News & Events,...

  18. Climate scenarios of sea level rise for the northeast Atlantic Ocean: a study including the effects of ocean

    E-Print Network [OSTI]

    Drijfhout, Sybren

    Climate scenarios of sea level rise for the northeast Atlantic Ocean: a study including the effects. Here we present a set of regional climate scenarios of sea level rise for the northeast Atlantic Ocean best estimate of twenty-first century sea level rise in the northeast Atlantic Ocean, given the current

  19. Western Interconnection Energy Imbalance Market Status and Prospects (Presentation)

    SciTech Connect (OSTI)

    Milligan, M.; Kirby, B.; King, J.; Beuning, S.

    2011-10-01T23:59:59.000Z

    This presentation describes how a new wholesale electricity market for energy imbalance ancillary services could be implemented and operated. Some conclusions of this presentation are: (1) Method for calculating additional reserve requirements due to wind and solar production; (2) EIM results in substantial reduction in reserves requirements and ramping demand; (3) Reduced participation reduces benefits for all but reduces the benefits to non-participants the most; (4) Full participation leads to maximum benefit across the Western Interconnection, up to 42% of total reserve requirement; and (5) Regional EIM implementations have smaller but substantial benefits.

  20. Novel Composite Materials for SOFC Cathode-Interconnect Contact

    SciTech Connect (OSTI)

    J. H. Zhu

    2009-07-31T23:59:59.000Z

    This report summarized the research efforts and major conclusions of our University Coal Research Project, which focused on developing a new class of electrically-conductive, Cr-blocking, damage-tolerant Ag-perovksite composite materials for the cathode-interconnect contact of intermediate-temperature solid oxide fuel cell (SOFC) stacks. The Ag evaporation rate increased linearly with air flow rate initially and became constant for the air flow rate {ge} {approx} 1.0 cm {center_dot} s{sup -1}. An activation energy of 280 KJ.mol{sup -1} was obtained for Ag evaporation in both air and Ar+5%H{sub 2}+3%H{sub 2}O. The exposure environment had no measurable influence on the Ag evaporation rate as well as its dependence on the gas flow rate, while different surface morphological features were developed after thermal exposure in the oxidizing and reducing environments. Pure Ag is too volatile at the SOFC operating temperature and its evaporation rate needs to be reduced to facilitate its application as the cathode-interconnect contact. Based on extensive evaporation testing, it was found that none of the alloying additions reduced the evaporation rate of Ag over the long-term exposure, except the noble metals Au, Pt, and Pd; however, these noble elements are too expensive to justify their practical use in contact materials. Furthermore, the addition of La{sub 0.8}Sr{sub 0.2}MnO{sub 3} (LSM) into Ag to form a composite material also did not significantly modify the Ag evaporation rate. The Ag-perovskite composites with the perovskite being either (La{sub 0.6}Sr{sub 0.4})(Co{sub 0.8}Fe{sub 0.2})O{sub 3} (LSCF) or LSM were systematically evaluated as the contact material between the ferritic interconnect alloy Crofer 22 APU and the LSM cathode. The area specific resistances (ASRs) of the test specimens were shown to be highly dependent on the volume percentage and the type of the perovskite present in the composite contact material as well as the amount of thermal cycling that the specimens were subjected to during testing. The Ag-LSCF composite contact materials proved more effective in trapping Cr within the contact material and preventing Cr migration into the cathode than the Ag-LSM composites. Ag-perovskite composite contact materials are promising candidates for use in intermediate-temperature SOFC stacks with ferritic stainless steel interconnects due to their ability to maintain acceptably low ASRs while reducing Cr migration into the cathode material.

  1. Production process for advanced space satellite system cables/interconnects.

    SciTech Connect (OSTI)

    Mendoza, Luis A.

    2007-12-01T23:59:59.000Z

    This production process was generated for the satellite system program cables/interconnects group, which in essences had no well defined production process. The driver for the development of a formalized process was based on the set backs, problem areas, challenges, and need improvements faced from within the program at Sandia National Laboratories. In addition, the formal production process was developed from the Master's program of Engineering Management for New Mexico Institute of Mining and Technology in Socorro New Mexico and submitted as a thesis to meet the institute's graduating requirements.

  2. Final Report on Transmission Pricing in the Western Interconnection

    SciTech Connect (OSTI)

    Douglas C. Larson; Lawrence Nordell

    2003-06-25T23:59:59.000Z

    Under this project, the Committee on Regional Electric Power Cooperation (CREPC) of the Western Interstate Energy Board developed a ''western pricing and congestion management proposal'' in order to foster efficient wholesale power markets and efficient use and expansion of the transmission grid. Drafts of this paper provided useful information to states/provinces in the Western Interconnection as Western Regional Transmission Organization (RTO) transmission pricing proposals have continued to evolve. Throughout the project there has been a gradual, but incomplete agreement on pricing systems to be used by RTOs in the West.

  3. Series interconnected photovoltaic cells and method for making same

    DOE Patents [OSTI]

    Albright, Scot P. (El Paso, TX); Chamberlin, Rhodes R. (El Paso, TX); Thompson, Roger A. (Littleton, CO)

    1995-01-01T23:59:59.000Z

    A novel photovoltaic module (10) and method for constructing the same are disclosed. The module (10) includes a plurality of photovoltaic cells (12) formed on a substrate (14) and laterally separated by interconnection regions (15). Each cell (12) includes a bottom electrode (16), a photoactive layer (18) and a top electrode layer (20). Adjacent cells (12) are connected in electrical series by way of a conductive-buffer line (22). The buffer line (22) is also useful in protecting the bottom electrode (16) against severing during downstream layer cutting processes.

  4. DER Certification Laboratory Pilot, Accreditation Plan, and Interconnection Agreement Handbook

    SciTech Connect (OSTI)

    Key, T.; Sitzlar, H. E.; Ferraro, R.

    2003-11-01T23:59:59.000Z

    This report describes the first steps toward creating the organization, procedures, plans and tools for distributed energy resources (DER) equipment certification, test laboratory accreditation, and interconnection agreements. It covers the activities and accomplishments during the first period of a multiyear effort. It summarizes steps taken to outline a certification plan to assist in the future development of an interim plan for certification and accreditation activities. It also summarizes work toward a draft plan for certification, a beta Web site to support communications and materials, and preliminary draft certification criteria.

  5. Evaluation of a Functional Interconnect System for SOFC's

    SciTech Connect (OSTI)

    Matthew Bender; James Rakowski

    2010-12-31T23:59:59.000Z

    The overall objective of this project was to validate the concept and application of a functional interconnect, based on a ferritic stainless steel, for a solid oxide fuel cell through manufacturing trials, laboratory testing, and field experience. The materials of construction and their surfaces were to be optimized for the particular service conditions and include low-cost ferritic stainless steels, novel postprocess treatments, and third-party coatings. This work aimed to optimize specific aspects of substrate alloy chemistry and to study the effects of long-term exposures on resistive oxide film structure and chemistry, interaction with applied surface coatings, and effectiveness of novel surface treatments.

  6. Electromigration kinetics and critical current of Pb-free interconnects

    SciTech Connect (OSTI)

    Lu, Minhua; Rosenberg, Robert [IBM T. J. Watson Research Center, Yorktown Heights, New York 10598 (United States)

    2014-04-07T23:59:59.000Z

    Electromigration kinetics of Pb-free solder bump interconnects have been studied using a single bump parameter sweep technique. By removing bump to bump variations in structure, texture, and composition, the single bump sweep technique has provided both activation energy and power exponents that reflect atomic migration and interface reactions with fewer samples, shorter stress time, and better statistics than standard failure testing procedures. Contact metallurgies based on Cu and Ni have been studied. Critical current, which corresponds to the Blech limit, was found to exist in the Ni metallurgy, but not in the Cu metallurgy. A temperature dependence of critical current was also observed.

  7. Interconnection-Wide Transmission Planning Initiative - Meeting Calendars |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment of EnergyIndustry15 IntellectualInterconnection

  8. Interconnection-Wide Transmission Planning Initiative: Topic B, Cooperation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment of EnergyIndustry15Among States in the Eastern Interconnection

  9. Low Carbon Jobs in an Interconnected World | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |Jilin ZhongdiantouLichuanInformationLoremoJobs in an Interconnected

  10. Circuits & Systems Test Circuits for Characterization of Process, Device, and Interconnect Variation ................................................................................. CS.1

    E-Print Network [OSTI]

    Reif, Rafael

    Circuits & Systems Test Circuits for Characterization of Process, Device, and Interconnect................................................................................................. CS.2 45nm Direct-battery DC-DC Converter for Mobile Applications

  11. Generation Interconnection Policies and Wind Power: A Discussion of Issues, Problems, and Potential Solutions

    SciTech Connect (OSTI)

    Porter, K.; Fink, S.; Mudd, C.; DeCesaro, J.

    2009-01-01T23:59:59.000Z

    This report describes the adoption and implementation of FERC Order 2003 and the reasons for the sharp rise in generation interconnection filings in recent years.

  12. WECC releases its first-ever transmission plan for the Western Interconnection

    Broader source: Energy.gov [DOE]

    The Western Electricity Coordinating Council (WECC) announced the release of its first 10-Year Regional Transmission Plan (Plan) for the Western Interconnection.

  13. NMAC 17.9.569 Interconnection of Generating Facilities with a...

    Open Energy Info (EERE)

    Reference LibraryAdd to library Legal Document- RegulationRegulation: NMAC 17.9.569 Interconnection of Generating Facilities with a Rated Capacity Greater than 10 MWLegal...

  14. Comparing Germany's and California's Interconnection Processes for PV Systems (White Paper)

    SciTech Connect (OSTI)

    Tweedie, A.; Doris, E.

    2011-07-01T23:59:59.000Z

    Establishing interconnection to the grid is a recognized barrier to the deployment of distributed energy generation. This report compares interconnection processes for photovoltaic projects in California and Germany. This report summarizes the steps of the interconnection process for developers and utilities, the average length of time utilities take to process applications, and paperwork required of project developers. Based on a review of the available literature, this report finds that while the interconnection procedures and timelines are similar in California and Germany, differences in the legal and regulatory frameworks are substantial.

  15. Vdd Programmability to Reduce FPGA Interconnect Power Fei Li, Yan Lin and Lei He

    E-Print Network [OSTI]

    He, Lei

    interconnect power by 56.51% and total FPGA power by 50.55%. Due to the highly low utilization rate of routing

  16. TDDB Chip Reliability in Copper Interconnects Muhammad Bashir, Dae Hyun Kim, Sung Kyu Lim and Linda Milor

    E-Print Network [OSTI]

    Lim, Sung Kyu

    the link between data collected from test structures and chip lifetime due to backend dielectric breakdown-k dielectric breakdown and an overview of our approach in Section 2. In Section 3, we give an overview of our field (E) and TF have been the focus of most of the work done in backend TDDB. The E model [2], [3

  17. Reliable, Low-Cost Distributed Generator/Utility System Interconnect: Final Subcontract Report, November 2001-March 2004

    SciTech Connect (OSTI)

    Ye, Z.; Walling, R.; Miller, N.; Du, P.; Nelson, K.; Li, L.; Zhou, R.; Garces, L.; Dame, M.

    2006-03-01T23:59:59.000Z

    This report summarizes the detailed study and development of new GE anti-islanding controls for two classes of distributed generation. One is inverter-interfaced, while the other is synchronous machine interfaced.

  18. RELIABILITY OF CAPACITOR CHARGING UNITS

    E-Print Network [OSTI]

    Sprott, Julien Clinton

    experience little change while those using the electronic cutoff would drift due to ageing components and changing parameters. The first few shots using the electronic cutoff were less reliable than subsequentRELIABILITY OF CAPACITOR CHARGING UNITS Clint Sprott July 30, 1965 University of Wisconsin

  19. Photovoltaic performance and reliability workshop

    SciTech Connect (OSTI)

    Mrig, L. [ed.

    1993-12-01T23:59:59.000Z

    This workshop was the sixth in a series of workshops sponsored by NREL/DOE under the general subject of photovoltaic testing and reliability during the period 1986--1993. PV performance and PV reliability are at least as important as PV cost, if not more. In the US, PV manufacturers, DOE laboratories, electric utilities, and others are engaged in the photovoltaic reliability research and testing. This group of researchers and others interested in the field were brought together to exchange the technical knowledge and field experience as related to current information in this evolving field of PV reliability. The papers presented here reflect this effort since the last workshop held in September, 1992. The topics covered include: cell and module characterization, module and system testing, durability and reliability, system field experience, and standards and codes.

  20. Electrical isolation of component cells in monolithically interconnected modules

    SciTech Connect (OSTI)

    Wanlass, Mark W. (Golden, CO)

    2001-01-01T23:59:59.000Z

    A monolithically interconnected photovoltaic module having cells which are electrically connected which comprises a substrate, a plurality of cells formed over the substrate, each cell including a primary absorber layer having a light receiving surface and a p-region, formed with a p-type dopant, and an n-region formed with an n-type dopant adjacent the p-region to form a single pn-junction, and a cell isolation diode layer having a p-region, formed with a p-type dopant, and an n-region formed with an n-type dopant adjacent the p-region to form a single pn-junction, the diode layer intervening the substrate and the absorber layer wherein the absorber and diode interfacial regions of a same conductivity type orientation, the diode layer having a reverse-breakdown voltage sufficient to prevent inter-cell shunting, and each cell electrically isolated from adjacent cells with a vertical trench trough the pn-junction of the diode layer, interconnects disposed in the trenches contacting the absorber regions of adjacent cells which are doped an opposite conductivity type, and electrical contacts.

  1. Lindane pollution near an industrial source in Northeast Spain

    SciTech Connect (OSTI)

    Hernandez, L.M.; Fernandez, M.A.; Gonzalez, M.J. (Inst. of Organic Chemistry, Madrid (Spain))

    1991-01-01T23:59:59.000Z

    Since DDT has been legally restricted for use in many countries, lindane, the gamma isomer of hexachlorocyclohexane, ({delta}-HCH), has become important as a substitute for DDT. Lindane is degraded poorly in the environment: it is hydrolyzed poorly and biodegrades slowly. Lindane is relatively immobile in soil. The town of Sabinanigo, located in northeast of the Iberian Peninsula, is host to one of only two factories in western Europe that manufacture lindane. HCH waste is being dumped near Sabinanigo by the chemical company Inquinosa. The purpose of this investigation are: (1) to determine the levels of HCH isomers in water, soil, vegetation, and invertebrates samples in five places of the Gallego river; (2) to evaluate biological accumulation of pollutant studied within the food webs; (3) to find out if the residue levels exceeded the limits recommended of HCH in water.

  2. Information Concerning Reliability Impacts under Various System...

    Energy Savers [EERE]

    of the Mirant Potomac River Plant Docket No. EO-05-01: PJM Interconnection, L.L.C. and PEPCO Holdings, Inc. is hereby providing you with additional information concerning...

  3. Frequency Control Performance Measurement and Requirements

    E-Print Network [OSTI]

    Illian, Howard F.

    2011-01-01T23:59:59.000Z

    and Electronics Engineers Interconnected Operations Services Interconnected Operations Services Implementation Task Force Interconnected Operations Services Working Group Interconnection reliability

  4. Interconnect-Power Dissipation in a Microprocessor Intel Israel (74) Ltd.

    E-Print Network [OSTI]

    Kolodny, Avinoam

    Interconnect-Power Dissipation in a Microprocessor Nir Magen Intel Israel (74) Ltd. Mobile Platform-performance microprocessor designed for power efficiency. The analysis showed that interconnect power is over 50 ­ Microprocessors; B.7.2 [Integrated Circuits]: Design Aids ­ Placement and Routing. General Terms Performance

  5. Impact of Interconnect Length on BTI and HCI Induced Frequency Degradation

    E-Print Network [OSTI]

    Kim, Chris H.

    Impact of Interconnect Length on BTI and HCI Induced Frequency Degradation Xiaofei Wang Pulkit Jain Instability (BTI) and Hot Carrier Injection (HCI) induced frequency degradation on interconnect length has degradation due to BTI decreases monotonically with longer wires because of the shorter effective stress time

  6. Control Design for Interconnected Power Systems with OLTCs via Robust Decentralized Control

    E-Print Network [OSTI]

    Pota, Himanshu Roy

    Control Design for Interconnected Power Systems with OLTCs via Robust Decentralized Control the problem of designing a decentralized control of interconnected power systems, with OLTC and SVCs, under are adjusted for variations in power system model due to large changes in loads. The only feedback needed

  7. Effect of Large Dynamic Loads on Interconnected Power Systems with Power Oscillation Damping

    E-Print Network [OSTI]

    Pota, Himanshu Roy

    Effect of Large Dynamic Loads on Interconnected Power Systems with Power Oscillation Damping.hossain and H.Pota)@adfa.edu.au Abstract--Power systems are composed of dynamic loads. In this paper presents an analysis to investigate the effects of large dynamic loads on interconnected power systems

  8. A SPECULATIVE FRAMEWORK FOR THE APPLICATION OF ARTIFICIAL INTELLIGENCE TO LARGE SCALE INTERCONNECTED POWER SYSTEMS

    E-Print Network [OSTI]

    Hartley, Roger

    INTERCONNECTED POWER SYSTEMS By Nadipuram R. Prasad Satish J. Ranade Electrical Engineering Department New Mexico) technologies to the operation and control of large scale interconnected electric power systems. A fundamental issue discussed in this paper is the control structure of power systems. An evaluation of the control

  9. Plasticity contributions to interface adhesion in thin-film interconnect structures

    E-Print Network [OSTI]

    Vainchtein, Anna

    Plasticity contributions to interface adhesion in thin-film interconnect structures Michael Lanea of plasticity in thin copper layers on the interface fracture resistance in thin-film interconnect structures yield properties together with a plastic flow model for the metal layers were used to predict

  10. Long-Distance Interconnection as Solar Resource Intermittency Solution: Optimizing the Use of Energy Storage and the Geographic

    E-Print Network [OSTI]

    of Energy Storage and the Geographic Dispersion + Interconnection of Solar Generating Facilities. Marc J. R energy storage and Long-distance interconnection coupled with geographic dispersion of solar generating and serve predetermined load requirements. Index Terms -- Energy Storage, variability, intermittency

  11. Geothermal Power and Interconnection: The Economics of Getting to Market

    SciTech Connect (OSTI)

    Hurlbut, D.

    2012-04-01T23:59:59.000Z

    This report provides a baseline description of the transmission issues affecting geothermal technologies. The report begins with a comprehensive overview of the grid, how it is planned, how it is used, and how it is paid for. The report then overlays onto this 'big picture' three types of geothermal technologies: conventional hydrothermal systems; emerging technologies such as enhanced engineered geothermal systems (EGS) and geopressured geothermal; and geothermal co-production with existing oil and gas wells. Each category of geothermal technology has its own set of interconnection issues, and these are examined separately for each. The report draws conclusions about each technology's market affinities as defined by factors related to transmission and distribution infrastructure. It finishes with an assessment of selected markets with known geothermal potential, identifying those that offer the best prospects for near-term commercial development and for demonstration projects.

  12. Gold-based electrical interconnections for microelectronic devices

    DOE Patents [OSTI]

    Peterson, Kenneth A. (Albuquerque, NM); Garrett, Stephen E. (Albuquerque, NM); Reber, Cathleen A. (Corrales, NM); Watson, Robert D. (Tijeras, NM)

    2002-01-01T23:59:59.000Z

    A method of making an electrical interconnection from a microelectronic device to a package, comprising ball or wedge compression bonding a gold-based conductor directly to a silicon surface, such as a polysilicon bonding pad in a MEMS or IMEMS device, without using layers of aluminum or titanium disposed in-between the conductor and the silicon surface. After compression bonding, optional heating of the bond above 363 C. allows formation of a liquid gold-silicon eutectic phase containing approximately 3% (by weight) silicon, which significantly improves the bond strength by reforming and enhancing the initial compression bond. The same process can be used for improving the bond strength of Au--Ge bonds by forming a liquid Au-12Ge eutectic phase.

  13. Catalytic bipolar interconnection plate for use in a fuel cell

    DOE Patents [OSTI]

    Lessing, P.A.

    1996-03-05T23:59:59.000Z

    A bipolar interconnection plate is described for use between adjacent fuel cell units in a stacked fuel cell assembly. Each plate is manufactured from an intermetallic composition, examples of which include NiAl or Ni{sub 3}Al which can catalyze steam reforming of hydrocarbons. Distributed within the intermetallic structure of the plate is a ceramic filler composition. The plate includes a first side with gas flow channels therein and a second side with fuel flow channels therein. A protective coating is applied to the first side, with exemplary coatings including strontium-doped or calcium-doped lanthanum chromite. To produce the plate, Ni and Al powders are combined with the filler composition, compressed at a pressure of about 10,000--30,000 psi, and heated to about 600--1000 C. The coating is then applied to the first side of the completed plate using liquid injection plasma deposition or other deposition techniques. 6 figs.

  14. Photovoltaics performance and reliability workshop

    SciTech Connect (OSTI)

    Mrig, L. (ed.) [ed.

    1992-01-01T23:59:59.000Z

    This document consists of papers and viewgraphs compiled from the proceedings of a workshop held in September 1992. This workshop was the fifth in a series sponsored by NREL/DOE under the general subject areas of photovoltaic module testing and reliability. PV manufacturers, DOE laboratories, electric utilities and others exchanged technical knowledge and field experience. The topics of cell and module characterization, module and system performance, materials and module durability/reliability research, solar radiation, and applications are discussed.

  15. Photovoltaics performance and reliability workshop

    SciTech Connect (OSTI)

    Mrig, L. [ed.] [ed.

    1992-11-01T23:59:59.000Z

    This document consists of papers and viewgraphs compiled from the proceedings of a workshop held in September 1992. This workshop was the fifth in a series sponsored by NREL/DOE under the general subject areas of photovoltaic module testing and reliability. PV manufacturers, DOE laboratories, electric utilities and others exchanged technical knowledge and field experience. The topics of cell and module characterization, module and system performance, materials and module durability/reliability research, solar radiation, and applications are discussed.

  16. The distribution and ecology of benthic Foraminifera and associated meiofauna in the Northeast Water Polynya, Greenland

    E-Print Network [OSTI]

    Newton, Adrian Charles

    1994-01-01T23:59:59.000Z

    Abundance of living calcareous Foraminifera and associated meiofauna have been estimated from the Northeast Water Polynya. Calcareous forams (] 150 gm) represented on average 28 and 47 % of the abundance and biomass respectively of the meiofaunal...

  17. Profit potential and risk associated with the adoption of alternative feeding practices on Northeast Texas dairies

    E-Print Network [OSTI]

    Reyes Gomez Llata, Alberto Alan

    1980-01-01T23:59:59.000Z

    PROFIT POTENTIAL AND RISK ASSOCIATED WITH THE ADOPTION OF ALTERNATIVE FEEDING PRACTICES ON NORTHEAST TEXAS DAIRIES A Thesis by ALBERTO ALAN REYES GOMEZ LLATA Submitted to the Graduate College of Texas ARM University in partial fulfillment... of the requirement for the degree of MASTER OF SCIENCE December 1980 Major Subject: Agricultural Economics PROFIT POTENTIAL AND RISK ASSOCIATED WITH THE ADOPTION OF ALTERNATIVE FEEDING PRACTICES ON NORTHEAST TEXAS DAIRIES A Thesis by ALBERTO ALAN REYES GOMEZ...

  18. Depositional environment of upper Wilcox sandstones, Northeast Thompsonville field, Jim Hogg and Webb Counties, Texas 

    E-Print Network [OSTI]

    Tedford, Fredrick John

    1977-01-01T23:59:59.000Z

    DEPOSITIONAL ENVIRONMENT OF UPPER WILCOX SANDSTONES, NORTHEAST THOMPSONVILLE FIELD, JIM HOGG AND WEBB COUNTIES, TEXAS A Thesis by FREDERICK JOHN TEDFORD Submitted to the Graduate College of Texas A&M University in partial fulfillment... of the requirement for the degree of MASTER OF SCIENCE August 1977 Major Subject: Geology DEPOSITIONAL ENVIRONMENT OF UPPER WILCOX SANDSTONES, NORTHEAST THOMPSONVILLE FIELD, JIM HOGG AND WEBB COUNTIES, TEXAS A Thesis by FREDERICK JOHN TEDFORD Approved...

  19. Mesozoic evolution of the northeast African shelf margin, Libya and Egypt

    SciTech Connect (OSTI)

    Aadland, R.K.; Schamel, S.

    1988-08-01T23:59:59.000Z

    The present tectonic features of the northeast African shelf margin between the Nile delta and the Gulf of Sirte are products of (1) precursory late Paleozoic basement arches, (2) early Mesozoic rifting and plate separation, and (3) Late Cretaceous structural inversion. Isopach and structural maps, cross sections, and sediment accumulation (geohistory) curves constructed from 89 wells in the Western Desert and 27 wells in northeastern Libya depict the structural and stratigraphic development of the northeast African shelf margin.

  20. Constructing Reliable Distributed Communication Systems with CORBA

    E-Print Network [OSTI]

    Schmidt, Douglas C.

    Constructing Reliable Distributed Communication Systems with CORBA Silvano Maffeis Douglas C model to support reliable data- and process- oriented distributed systems that communicate through syn distributed object computing systems with CORBA. First, we examine the question of whether reliable applica

  1. Assessment of microelectronics packaging for high temperature, high reliability applications

    SciTech Connect (OSTI)

    Uribe, F.

    1997-04-01T23:59:59.000Z

    This report details characterization and development activities in electronic packaging for high temperature applications. This project was conducted through a Department of Energy sponsored Cooperative Research and Development Agreement between Sandia National Laboratories and General Motors. Even though the target application of this collaborative effort is an automotive electronic throttle control system which would be located in the engine compartment, results of this work are directly applicable to Sandia`s national security mission. The component count associated with the throttle control dictates the use of high density packaging not offered by conventional surface mount. An enabling packaging technology was selected and thermal models defined which characterized the thermal and mechanical response of the throttle control module. These models were used to optimize thick film multichip module design, characterize the thermal signatures of the electronic components inside the module, and to determine the temperature field and resulting thermal stresses under conditions that may be encountered during the operational life of the throttle control module. Because the need to use unpackaged devices limits the level of testing that can be performed either at the wafer level or as individual dice, an approach to assure a high level of reliability of the unpackaged components was formulated. Component assembly and interconnect technologies were also evaluated and characterized for high temperature applications. Electrical, mechanical and chemical characterizations of enabling die and component attach technologies were performed. Additionally, studies were conducted to assess the performance and reliability of gold and aluminum wire bonding to thick film conductor inks. Kinetic models were developed and validated to estimate wire bond reliability.

  2. Distributed Reliable Object-Oriented Programming (DROOP)

    E-Print Network [OSTI]

    Guerraoui, Rachid

    Distributed Reliable Object-Oriented Programming (DROOP) P. Eugster November 3, 2003 Abstract with such failures, coining the term Distributed Reliable Object-Oriented Programming (DROOP). 1 SCOOP

  3. Thermoelectric Materials By Design: Mechanical Reliability (Agreement...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    By Design: Mechanical Reliability (Agreement 14957) Thermoelectric Materials By Design: Mechanical Reliability (Agreement 14957) Presentation from the U.S. DOE Office of Vehicle...

  4. PEEM Thermal Stress and Reliability (Presentation)

    SciTech Connect (OSTI)

    O'Keefe, M. P.

    2007-11-08T23:59:59.000Z

    Advancing power electronics thermal stress and reliability is a critical factor in power electronics equipment. NREL aims to improve thermal stress and reliability of power electronics technologies.

  5. Distributed Generation Operational Reliability and Availability...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reliability and Availability Database, Final Report, January 2004 Distributed Generation Operational Reliability and Availability Database, Final Report, January 2004 This final...

  6. Recommendations to Address Power Reliability Concerns Raised...

    Energy Savers [EERE]

    Reliability Concerns Raised as a Result of Pending Environmental Regulations for Electric Generation Stations Recommendations to Address Power Reliability Concerns Raised as a...

  7. Sandia National Laboratories: photovoltaic plant reliability

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    photovoltaic plant reliability Sandia-Electric Power Research Institute Partnership Publishes Photovoltaic Reliability Report On January 21, 2014, in Energy, Facilities, Grid...

  8. Sandia National Laboratories: national reliability database

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    national reliability database Third Annual Continuous Reliability Enhancement for Wind (CREW) Database Report Now Available On October 17, 2013, in Energy, News, News & Events,...

  9. Smart Grid Investments Improve Grid Reliability, Resilience,...

    Office of Environmental Management (EM)

    Investments Improve Grid Reliability, Resilience, and Storm Responses (November 2014) Smart Grid Investments Improve Grid Reliability, Resilience, and Storm Responses (November...

  10. Playas Grid Reliability and Distributed Energy Research

    SciTech Connect (OSTI)

    Romero, Van; Weinkauf, Don; Khan, Mushtaq; Helgeson, Wes; Weedeward, Kevin; LeClerc, Corey; Fuierer, Paul

    2012-06-30T23:59:59.000Z

    The future looks bright for solar and renewable energies in the United States. Recent studies claim that by 2050, solar power could supply a third of all electricity demand in the country’s western states. Technology advances, soft policy changes, and increased energy consciousness will all have to happen to achieve this goal. But the larger question is, what would it take to do more throughout the United States? The studies tie future solar and renewable growth in the United States to programs that aim to lower the soft costs of solar adoption, streamline utility interconnections, and increase technology advances through research and development. At the state and local levels, the most important steps are: • Net metering: Net metering policies lets customers offset their electric bills with onsite solar and receive reliable and fair compensation for the excess electricity they provide to the grid. Not surprisingly, what utilities consider fair is not necessarily a rate that’s favorable to solar customers. • Renewable portfolio standards (RPS): RPS policies require utilities to provide a certain amount of their power from renewable sources; some set specific targets for solar and other renewables. California’s aggressive RPS1 of 33% renewable energy by 2020 is not bankrupting the state, or its residents. • Strong statewide interconnection policies: Solar projects can experience significant delays and hassles just to get connected to the grid. Streamlined feasibility and impact analysis are needed. Good interconnection policies are crucial to the success of solar or renewable energy development. • Financing options: Financing is often the biggest obstacle to solar adoption. Those obstacles can be surmounted with policies that support creative financing options like third-party ownership (TPO) and property assessed clean energy (PACE). Attesting to the significance of TPO is the fact that in Arizona, it accounted for 86% of all residential photovoltaic (PV) installations in Q1 20132. Policies beyond those at the state level are also important for solar. The federal government must play a role including continuation of the federal Investment tax credit,3 responsible development of solar resources on public lands, and support for research and development (R&D) to reduce the cost of solar and help incorporate large amounts of solar into the grid. The local level can’t be ignored. Local governments should support: solar rights laws, feed-in tariffs (FITs), and solar-friendly zoning rules. A great example of how effective local policies can be is a city like Gainesville, Florida4, whose FIT policy has put it on the map as a solar leader. This is particularly noteworthy because the Sunshine State does not appear anywhere on the list of top solar states, despite its abundant solar resource. Lancaster, California5, began by streamlining the solar permitting process and now requires solar on every new home. Cities like these point to the power of local policies, and the ability of local governments to get things done. A conspicuously absent policy is Community Choice energy6, also called community choice aggregation (CCA). This model allows local governments to pool residential, business, and municipal electricity loads and to purchase or generate on their behalf. It provides rate stability and savings and allows more consumer choice and local control. The model need not be focused on clean energy, but it has been in California, where Marin Clean Energy7, the first CCA in California, was enabled by a state law -- highlighting the interplay of state and local action. Basic net metering8 has been getting a lot of attention. Utilities are attacking it9 in a number of states, claiming it’s unfair to ratepayers who don’t go solar. On the other hand, proponents of net metering say utilities’ fighting stance is driven by worries about their bottom line, not concern for their customers. Studies in California10, Vermont11, New York12, and Texas13 have found that the benefits of net metering (like savings on investments

  11. Robust Decentralized Switching Power System Stabilisers for Interconnected

    E-Print Network [OSTI]

    Pota, Himanshu Roy

    ]. In these works, controllers are designed for multi-machine power systems using modern control techniques like system control design; Decentralized control; Switching control; Dwell time; Power system stabilizers. 1. INTRODUCTION The primary task of the power system control is to provide reliable and secure electric power

  12. An Optical Interconnection Architecture for Large Packet Switches

    E-Print Network [OSTI]

    reliability concerns due to the large number of active components in the switch fabric. Routers with optical to consider the limits imposed by electronic technology; in particular, it must take into account power not only solutions that make use of optics inside electronic switches but that also switching architectures

  13. Solid oxide fuel cell with internal reforming, catalyzed interconnect for use therewith, and methods

    DOE Patents [OSTI]

    Liu, Di-Jia; Guan, Jie; Minh, Nguyen

    2010-06-08T23:59:59.000Z

    A catalyzed interconnect for an SOFC electrically connects an anode and an anodic current collector and comprises a metallic substrate, which provides space between the anode and anodic current collector for fuel gas flow over at least a portion of the anode, and a catalytic coating on the metallic substrate comprising a catalyst for catalyzing hydrocarbon fuel in the fuel gas to hydrogen rich reformate. An SOFC including the catalyzed anodic inter-connect, a method for operating an SOFC, and a method for making a catalyzed anodic interconnect are also disclosed.

  14. Fast Algorithms for High Frequency Interconnect Modeling in VLSI Circuits and Packages

    E-Print Network [OSTI]

    Yi, Yang

    2011-02-22T23:59:59.000Z

    Conductor array with magnetic blocks ................. 61 31 CPU time ratio of Maxwell 3D over our algorithm ........... 62 32 Cross sectional view of |B|. ....................... 63 33 E?ect of M 0 (M 0 = M S cos(theta)) on the inductance ......... 64 34 E...?ect of conductor current on the inductance ............. 65 35 Magnitude of S-parameters for interconnect with non-magnetic blocks 66 36 Magnitude of S-parameters for interconnect with magnetic blocks .. 67 37 Phase of S-parameters for interconnect with non...

  15. Ris-R-1235(EN) Reliability Databases

    E-Print Network [OSTI]

    .1 ISO standard: Gas and Oil - Collection of Reliability and Maintenance Data for Equipment 17 5.2 EDF standard for collection of reliability and maintenance data for equipment (also called MCD ­ Mode et Cause judgements on new equipment reliability parameters or using standard values or standard reliability models (e

  16. Assessing Reliability in Energy Supply Systems

    E-Print Network [OSTI]

    McCarthy, Ryan; Ogden, Joan M.; Sperling, Dan

    2008-01-01T23:59:59.000Z

    total of 15 metrics. Pathway reliability General objectives Adequacy Security Functional zones Primary energy supply

  17. Assessing reliability in energy supply systems

    E-Print Network [OSTI]

    McCarthy, Ryan W.; Ogden, Joan M.; Sperling, Daniel

    2007-01-01T23:59:59.000Z

    total of 15 metrics. Pathway reliability General objectives Adequacy Security Functional zones Primary energy supply

  18. The design of a reliable reputation system

    E-Print Network [OSTI]

    Swamynathan, Gayatri; Almeroth, Kevin C.; Zhao, Ben Y.

    2010-01-01T23:59:59.000Z

    reliability by spreading its transactions evenly across all 20 peers in the system (shown by Distribution

  19. Nuclear-renewable hybrid energy systems: Opportunities, interconnections, and needs

    SciTech Connect (OSTI)

    Mark F. Ruth; Owen R. Zinaman; Mark Antkowiak; Richard D. Boardman; Robert S. Cherry; Morgan D. Bazilian

    2014-02-01T23:59:59.000Z

    As the U.S. energy system evolves, the amount of electricity from variable-generation sources is likely to increase, which could result in additional times when electricity demand is lower than available production. Thus, purveyors of technologies that traditionally have provided base-load electricity—such as nuclear power plants—can explore new operating procedures to deal with the associated market signals. Concurrently, innovations in nuclear reactor design coupled with sophisticated control systems now allow for more complex apportionment of heat within an integrated system such as one linked to energy-intensive chemical processes. This paper explores one opportunity – nuclear-renewable hybrid energy systems. These are defined as integrated facilities comprised of nuclear reactors, renewable energy generation, and industrial processes that can simultaneously address the need for grid flexibility, greenhouse gas emission reductions, and optimal use of investment capital. Six aspects of interaction (interconnections) between elements of nuclear-renewable hybrid energy systems are identified: Thermal, electrical, chemical, hydrogen, mechanical, and information. Additionally, system-level aspects affect selection, design, and operation of this hybrid system type. Throughout the paper, gaps and research needs are identified to promote further exploration of the topic.

  20. Wind turbine reliability database update.

    SciTech Connect (OSTI)

    Peters, Valerie A.; Hill, Roger Ray; Stinebaugh, Jennifer A.; Veers, Paul S.

    2009-03-01T23:59:59.000Z

    This report documents the status of the Sandia National Laboratories' Wind Plant Reliability Database. Included in this report are updates on the form and contents of the Database, which stems from a fivestep process of data partnerships, data definition and transfer, data formatting and normalization, analysis, and reporting. Selected observations are also reported.

  1. FIELD RELIABILITY OF ELECTRONIC SYSTEMS

    E-Print Network [OSTI]

    study of in-the-field experience of electronics reliability. Tage Elm. Abstract. This report and internally) induced failures. The report is not meant to be merely an indication of the state of the art for the re- liability prediction methods we know, but also as a contribution to the investigation of man-machine

  2. Oahu Wind Integration and Transmission Study (OWITS): Hawaiian Islands Transmission Interconnection Project

    SciTech Connect (OSTI)

    Woodford, D.

    2011-02-01T23:59:59.000Z

    This report provides an independent review included an initial evaluation of the technical configuration and capital costs of establishing an undersea cable system and examining impacts to the existing electric transmission systems as a result of interconnecting the islands.

  3. Relevance of Generation Interconnection Procedures to Feed-in Tariffs in the United States

    SciTech Connect (OSTI)

    Fink, S.; Porter, K.; Rogers, J.

    2010-10-01T23:59:59.000Z

    Feed-in tariffs (FITs) have been used to promote renewable electricity development in over 40 countries throughout the past two decades. These policies generally provide guaranteed prices for the full system output from eligible generators for a fixed time period (typically 15-20 years). Due in part to the success of FIT policies in Europe, some jurisdictions in the United States are considering implementing similar policies, and a few have already put such policies in place. This report is intended to offer some guidance to policymakers and regulators on how generator interconnection procedures may affect the implementation of FITs and how state generator interconnection procedures can be formulated to support state renewable energy objectives. This report is based on a literature review of model interconnection procedures formulated by several organizations, as well as other documents that have reviewed, commented on, and in some cases, ranked state interconnection procedures.

  4. Renewable Generation and Interconnection to the Electrical Grid in Southern California

    Broader source: Energy.gov [DOE]

    Presentation covers the topic of "Renewable Generation and Interconnection to the Electrical Grid in Southern California," given at the Spring 2010 Federal Utility Partnership Working Group (FUPWG) meeting in Providence, Rhode Island.

  5. On the State of the Art of Metal Interconnects for SOFC Application

    SciTech Connect (OSTI)

    Jablonski@netl.doe.gov

    2011-02-27T23:59:59.000Z

    One of the recent developments for Solid Oxide Fuel Cells (SOFC) is oxide component materials capable of operating at lower temperatures such as 700-800C. This lower temperature range has provided for the consideration of metallic interconnects which have several advantages over ceramic interconnects: low cost, ease in manufacturing, and high conductivity. Most metals and alloys will oxidize under both the anode and cathode conditions within an SOFC, thus a chief requirement is that the base metal oxide scale must be electrically conductive since this constitutes the majority of the electrical resistance in a metallic interconnect. Common high temperature alloys form scales that contain chrome, silicon and aluminum oxides among others. Under SOFC operating conditions chrome oxide is a semi-conductor while silicon and aluminum oxides are insulators. In this talk we will review the evolution in candidate alloys and surface modifications which constitute an engineered solution for SOFC interconnect applications.

  6. High-performance parallel processors based on star-coupled wavelength division multiplexing optical interconnects

    DOE Patents [OSTI]

    Deri, Robert J. (Pleasanton, CA); DeGroot, Anthony J. (Castro Valley, CA); Haigh, Ronald E. (Arvada, CO)

    2002-01-01T23:59:59.000Z

    As the performance of individual elements within parallel processing systems increases, increased communication capability between distributed processor and memory elements is required. There is great interest in using fiber optics to improve interconnect communication beyond that attainable using electronic technology. Several groups have considered WDM, star-coupled optical interconnects. The invention uses a fiber optic transceiver to provide low latency, high bandwidth channels for such interconnects using a robust multimode fiber technology. Instruction-level simulation is used to quantify the bandwidth, latency, and concurrency required for such interconnects to scale to 256 nodes, each operating at 1 GFLOPS performance. Performance scales have been shown to .apprxeq.100 GFLOPS for scientific application kernels using a small number of wavelengths (8 to 32), only one wavelength received per node, and achievable optoelectronic bandwidth and latency.

  7. EIS-0438: Interconnection of the Proposed Hermosa West Wind Farm Project, Albany County, Wyoming

    Broader source: Energy.gov [DOE]

    After the applicant withdrew its request to interconnect the proposed Hermosa West Wind Farm Project with Western Area Power Administration’s transmission system, Western cancelled preparation of an EIS to evaluate the potential environmental impacts of the proposal.

  8. Solid oxide fuel cell with single material for electrodes and interconnect

    DOE Patents [OSTI]

    McPheeters, Charles C. (Naperville, IL); Nelson, Paul A. (Wheaton, IL); Dees, Dennis W. (Downers Grove, IL)

    1994-01-01T23:59:59.000Z

    A solid oxide fuel cell having a plurality of individual cells. A solid oxide fuel cell has an anode and a cathode with electrolyte disposed therebetween, and the anode, cathode and interconnect elements are comprised of substantially one material.

  9. Record of Decision for the Electrical Interconnection of the Windy Point Wind Energy Project.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    2006-11-01T23:59:59.000Z

    The Bonneville Power Administration (BPA) has decided to offer contract terms for interconnection of 250 megawatts (MW) of power to be generated by the proposed Windy Point Wind Energy Project (Wind Project) into the Federal Columbia River Transmission System (FCRTS). Windy Point Partners, LLC (WPP) propose to construct and operate the proposed Wind Project and has requested interconnection to the FCRTS. The Wind Project will be interconnected at BPA's Rock Creek Substation, which is under construction in Klickitat County, Washington. The Rock Creek Substation will provide transmission access for the Wind Project to BPA's Wautoma-John Day No.1 500-kilovolt (kV) transmission line. BPA's decision to offer terms to interconnect the Wind Project is consistent with BPA's Business Plan Final Environmental Impact Statement (BP EIS) (DOE/EIS-0183, June 1995), and the Business Plan Record of Decision (BP ROD, August 15, 1995). This decision thus is tiered to the BP ROD.

  10. Fully Integrated Graphene and Carbon Nanotube Interconnects for Gigahertz High-Speed Cmos Electronics

    E-Print Network [OSTI]

    Chen, Xiangyu

    Carbon-based nanomaterials such as metallic single-walled carbon nanotubes, multiwalled carbon nanotubes (MWCNTs), and graphene have been considered as some of the most promising candidates for future interconnect technology ...

  11. Demonstration of monolithically integrated graphene interconnects for low-power CMOS applications

    E-Print Network [OSTI]

    Lee, Kyeong-Jae

    2011-01-01T23:59:59.000Z

    In recent years, interconnects have become an increasingly difficult design challenge as their relative performance has not improved at the same pace with transistor scaling. The specifications for complex features, clock ...

  12. Optically Interconnected Data Center Architecture for Bandwidth Intensive Energy Efficient Networking

    E-Print Network [OSTI]

    Bergman, Keren

    sophisticated cooling systems, further reducing overall data center energy efficiencies. Moreover, measurements feasibility of the system. Keywords: optical network architecture, data center networks, reconfigurableOptically Interconnected Data Center Architecture for Bandwidth Intensive Energy Efficient

  13. Process based cost modeling of emerging optoelectronic interconnects : implications for material platform choice

    E-Print Network [OSTI]

    Liu, Shan, S.M. Massachusetts Institute of Technology

    2008-01-01T23:59:59.000Z

    Continuously increasing demand for processing power, storage capacity, and I/O capacity in personal computing, data network, and display interface suggests that optical interconnects may soon supplant copper not only for ...

  14. Sandia Energy - Energy and Water in the Western and Texas Interconnect...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy and Water in the Western and Texas Interconnects Home Climate & Earth Systems WaterEnergy Nexus Decision Models for Integrating EnergyWater Energy and Water in the Western...

  15. Innovative Distributed Power Grid Interconnection and Control Systems: Final Report, December 11, 2000 - August 30, 2005

    SciTech Connect (OSTI)

    DePodesta, K.; Birlingmair, D.; West, R.

    2006-03-01T23:59:59.000Z

    The contract goal was to further advance distributed generation in the marketplace by making installations more cost-effective and compatible with existing systems. This was achieved by developing innovative grid interconnection and control systems.

  16. Phase 2 Report: Oahu Wind Integration and Transmission Study (OWITS); Hawaiian Islands Transmission Interconnection Project

    SciTech Connect (OSTI)

    Woodford, D.

    2011-02-01T23:59:59.000Z

    This report provides an independent review including an initial evaluation of the technical configuration and capital costs of establishing an undersea cable system and examining impacts to the existing electric transmission systems as a result of interconnecting the islands

  17. Pricing Games among Interconnected Microgrids Gaurav S. Kasbekar and Saswati Sarkar

    E-Print Network [OSTI]

    Sarkar, Saswati

    1 Pricing Games among Interconnected Microgrids Gaurav S. Kasbekar and Saswati Sarkar Abstract than, less than or as much aggregate power as it requires. G. Kasbekar and S. Sarkar

  18. Reuse Distance Based Circuit Replacement in Silicon Photonic Interconnection Networks for HPC

    E-Print Network [OSTI]

    Bergman, Keren

    -scale distance, can help to further scale data-movement capabilities in high performance computing (HPC demands within high performance computing (HPC) systems. Silicon photonic (SiP) interconnects [1-3], which

  19. THOR Concept Complex simulation Autonomous control Conclusion Interconnection of the behavior-based control

    E-Print Network [OSTI]

    Berns, Karsten

    Schmidt Interconnection of iB2C and a detailed machine model rrlab.cs.uni-kl.de 2 #12;THOR Concept Complex of iB2C and a detailed machine model rrlab.cs.uni-kl.de 3 #12;THOR Concept Complex simulation Schmidt Interconnection of iB2C and a detailed machine model rrlab.cs.uni-kl.de 5 #12;THOR Concept Complex

  20. Upgrade of the LHC magnet interconnections thermal shielding

    SciTech Connect (OSTI)

    Musso, Andrea; Barlow, Graeme; Bastard, Alain; Charrondiere, Maryline; Deferne, Guy; Dib, Gaëlle; Duret, Max; Guinchard, Michael; Prin, Hervé; Craen, Arnaud Vande; Villiger, Gilles [CERN European Organization for Nuclear Research, Meyrin 1211, Geneva 23, CH (Switzerland); Chrul, Anna [The Henryk Niewodniczanski Institute of Nuclear Physics, Polish Academy of Sciences, ul.Radzikowskiego 152, 31-324 Krakow (Poland); Damianoglou, Dimitrios [NTUA National Technical University of Athens, Heeron Polytechniou 9, 15780 Zografou (Greece); Strychalski, Micha? [Wroclaw University of Technology, Faculty of Mechanical and Power Engineering, Wyb. Wyspianskiego 27, Wroclaw, 50-370 (Poland); Wright, Loren [Lancaster University, Bailrigg, Lancaster, LA1 4YW (United Kingdom)

    2014-01-29T23:59:59.000Z

    The about 1700 interconnections (ICs) between the Large Hadron Collider (LHC) superconducting magnets include thermal shielding at 50-75 K, providing continuity to the thermal shielding of the magnet cryostats to reduce the overall radiation heat loads to the 1.9 K helium bath of the magnets. The IC shield, made of aluminum, is conduction-cooled via a welded bridge to the thermal shield of the adjacent magnets which is actively cooled. TIG welding of these bridges made in the LHC tunnel at installation of the magnets induced a considerable risk of fire hazard due to the proximity of the multi-layer insulation of the magnet shields. A fire incident occurred in one of the machine sectors during machine installation, but fortunately with limited consequences thanks to prompt intervention of the operators. LHC is now undergoing a 2 years technical stop during which all magnet's ICs will have to be opened to consolidate the magnet electrical connections. The IC thermal shields will therefore have to be removed and re-installed after the work is completed. In order to eliminate the risk of fire hazard when re-welding, it has been decided to review the design of the IC shields, by replacing the welded bridges with a mechanical clamping which also preserves its thermal function. An additional advantage of this new solution is the ease in dismantling for maintenance, and eliminating weld-grinding operations at removal needing radioprotection measures because of material activation after long-term operation of the LHC. This paper describes the new design of the IC shields and in particular the theoretical and experimental validation of its thermal performance. Furthermore a status report of the on-going upgrade work in the LHC is given.

  1. Gearbox Reliability Collaborative Bearing Calibration

    SciTech Connect (OSTI)

    van Dam, J.

    2011-10-01T23:59:59.000Z

    NREL has initiated the Gearbox Reliability Collaborative (GRC) to investigate the root cause of the low wind turbine gearbox reliability. The GRC follows a multi-pronged approach based on a collaborative of manufacturers, owners, researchers and consultants. The project combines analysis, field testing, dynamometer testing, condition monitoring, and the development and population of a gearbox failure database. At the core of the project are two 750kW gearboxes that have been redesigned and rebuilt so that they are representative of the multi-megawatt gearbox topology currently used in the industry. These gearboxes are heavily instrumented and are tested in the field and on the dynamometer. This report discusses the bearing calibrations of the gearboxes.

  2. Power Reliability at BASF Corporation

    E-Print Network [OSTI]

    Theising, T. R.

    2011-01-01T23:59:59.000Z

    Power Reliability at BASF Corporation Thomas R. Theising Energy Systems Manager BASF Corporation ABSTRACT: Quality is defined not as what the supplier puts into the product but what the customer gets out and is willing to pay for. Power.... INTRODUCTION: BASF often identifies its? power quality by the effects it has on its ability to manufacture products. Improvements are made to remedy the power quality problems either through the elimination of the problems or through some means...

  3. Power Reliability at BASF Corporation

    E-Print Network [OSTI]

    Theising, T. R.

    2012-01-01T23:59:59.000Z

    Power Reliability at BASF Corporation Thomas R. Theising Energy Systems Manager BASF Corporation ABSTRACT: Quality is defined not as what the supplier puts into the product but what the customer gets out and is willing to pay for. Power.... INTRODUCTION: BASF often identifies its? power quality by the effects it has on its ability to manufacture products. Improvements are made to remedy the power quality problems either through the elimination of the problems or through some means...

  4. Arnold Schwarzenegger REAL-TIME GRID RELIABILITY

    E-Print Network [OSTI]

    monitoring and tracking of phase angles between sources and sink buses within the Western Interconnection System Prototype Source: CERTS License Agreements and Copyrights / Non-Disclosure Agreements The Real subject to non-disclosure agreement between data providers and California ISO. #12;iii Table of Contents

  5. Microgrids and Heterogeneous Security, Quality, Reliability, and Availability

    E-Print Network [OSTI]

    Marnay, Chris

    2007-01-01T23:59:59.000Z

    and Energy Reliability, Distribution System Integrationand Energy Reliability, Distribution System Integration

  6. FIVE-YEAR STRATEGIC PLAN 2003-2007 USDA FOREST SERVICE NORTHEAST CENTER FOR URBAN & COMMUNITY FORESTRY

    E-Print Network [OSTI]

    Schweik, Charles M.

    FORESTRY United States Department of Agriculture Forest Service Northeastern Area #12;Page 2 D R AFT BACKGROUND AND MISSION The Northeast Center for Urban and Community Forestry was estab- lished in October. The Northeast Center for Urban and Community Forestry responds to urban and community forestry information needs

  7. Consortium for Electric Reliability Technology Solutions Grid of the Future White Paper on Review of Recent Reliability Issues and Systems Events

    SciTech Connect (OSTI)

    Hauer, John F.; Dagle, Jeffery E.

    1999-12-01T23:59:59.000Z

    This report is one of six reports developed under the U.S. Department of Energy (DOE) program in Power System Integration and Reliability (PSIR). The objective of this report is to review, analyze, and evaluate critical reliability issues demonstrated by recent disturbance events in the North America power system. Eleven major disturbances are examined, most occurring in this decade. The strategic challenge is that the pattern of technical need has persisted for a long period of time. For more than a decade, anticipation of market deregulation has been a major disincentive to new investments in system capacity. It has also inspired reduced maintenance of existing assets. A massive infusion of better technology is emerging as the final option to continue reliable electrical services. If an investment in better technology will not be made in a timely manner, then North America should plan its adjustments to a very different level of electrical service. It is apparent that technical operations staff among the utilities can be very effective at marshaling their forces in the immediate aftermath of a system emergency, and that serious disturbances often lead to improved mechanisms for coordinated operation. It is not at all apparent that such efforts can be sustained through voluntary reliability organizations in which utility personnel external to those organizations do most of the technical work. The eastern interconnection shows several situations in which much of the technical support has migrated from the utilities to the Independent System Operator (ISO), and the ISO staffs or shares staff with the regional reliability council. This process may be a natural and very positive consequence of utility restructuring. If so, the process should be expedited in regions where it is less advanced.

  8. SPIDERS Bi-Directional Charging Station Interconnection Testing

    SciTech Connect (OSTI)

    Simpson, M.

    2013-09-01T23:59:59.000Z

    The Smart Power Infrastructure Demonstration for Energy Reliability and Security (SPIDERS) program is a multi-year Department of Defense-Department of Energy (DOE) collaborative effort that will demonstrate integration of renewables into island-able microgrids using on-site generation control, demand response, and energy storage with robust security features at multiple installations. Fort Carson, Colorado, will be the initial development and demonstration site for use of plug-in electric vehicles as energy storage (also known as vehicle-to-grid or V2G).

  9. Revised Record of Decision for the Electrical Interconnection of the Summit/Westward Project

    SciTech Connect (OSTI)

    N /A

    2004-10-21T23:59:59.000Z

    The Bonneville Power Administration (BPA) has decided to amend its July 25, 2003, Record of Decision (ROD) regarding the proposed Summit/Westward Project (Project) to offer contract terms for an optional interconnection of this Project into the Federal Columbia River Transmission System (FCRTS). Under this optional interconnection plan, BPA would integrate electric power from the Project into the FCRTS at a point adjacent to Clatskanie People's Utility District (CPUD) existing Wauna Substation. In order to deliver power to this location, CPUD would develop a new substation (Bradbury Substation) at a site near the Project and a new 230-kV transmission line from there to CPUD's Wauna Substation, which is already connected to the FCRTS. As part of this revised decision, BPA will facilitate CPUD development of the Bradbury-Wauna transmission line by allowing joint use of BPA right-of-way. This will involve reconstructing a section of BPA's 115-kV Allston-Astoria No. 1 transmission line from single-circuit H-frame wood-pole design to double-circuit single metal pole design. Terms of BPA participation in CPUD's development of the Bradbury-Wauna transmission line will be documented in a Construction Agreement. This optional interconnection plan is in addition to BPA's previous offer for interconnection of the Project at BPA's Allston Substation, as documented in the July 25, 2003, ROD. As with the initial interconnection plan, the decision to offer terms to interconnect the Project through the optional interconnection plan is consistent with BPA's Business Plan Final Environmental Impact Statement (BP EIS) (DOE/EIS-0183, June 1995), and the Business Plan Record of Decision (BP ROD, August 1995). This decision thus is similarly tiered to the Business Plan ROD.

  10. BPA Fact Sheet - Preparing for reliability entity registration...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Western Electric Coordinating Council (WECC) fulfi lls this role in the Western interconnection and has asked entities within this area to register according to the NERC...

  11. Electric Power Reliability in Chemical Plants

    E-Print Network [OSTI]

    Cross, M. B.

    The quality and reliability of utility-generated electric power is presently receiving a great deal of attention from the chemical and refining industry. What changes have taken place to make electric power reliability a major topic of discussion...

  12. Arnold Schwarzenegger REAL-TIME GRID RELIABILITY

    E-Print Network [OSTI]

    Energy Research (PIER) California Energy Commission Beth Chambers Contract Manager Jamie Patterson (VSA) prototype to monitor system voltage conditions and provide real time dispatchers with reliabilityArnold Schwarzenegger Governor REAL-TIME GRID RELIABILITY MANAGEMENT California ISO Real

  13. Data Communication Principles Reliable Data Transfer

    E-Print Network [OSTI]

    Ramkumar, Mahalingam

    Data Communication Principles Switching Reliable Data Transfer Data Communication Basics Mahalingam Ramkumar Mississippi State University, MS September 8, 2014 Ramkumar CSE 4153 / 6153 #12;Data Communication Principles Switching Reliable Data Transfer 1 Data Communication Principles Data Rate of a Communication

  14. Reliability Analysis of Microelectronic Components and Materials

    E-Print Network [OSTI]

    Berlin,Technische Universität

    1 Reliability Analysis of Microelectronic Components and Materials Increasing numbers on the structural integrity of embedded micro- electronic components and assemblies. Improved knowledge and modeling methods are critical for the reliable use of electronic packages. In particular, since the advent

  15. Electric Power Reliability in Chemical Plants 

    E-Print Network [OSTI]

    Cross, M. B.

    1989-01-01T23:59:59.000Z

    at plants across the country? Has the quality and reliability of utility-generated power deteriorated over the past five or ten years? Or, has the perception of what constitutes reliable power changed with the advent, installation, and increasing usage...

  16. Distributed Generation Operational Reliability, Executive Summary...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2004 This report summarizes the results of the project, "Distributed Generation Market Transformation Tools: Distributed Generation Reliability and Availability Database,"...

  17. Reliability Challenges for Solar Energy (Presentation)

    SciTech Connect (OSTI)

    Kurtz, S.

    2009-12-08T23:59:59.000Z

    Presentation that reviews reliability issues related to various types of photovoltaic tecnnologies, including crystalline silicon, thin films, and concentrating PV.

  18. LUNAR MASS SPECTROMETER RELIABILITY LOGIC DIAGRAM

    E-Print Network [OSTI]

    Rathbun, Julie A.

    point (A) to (F). The block diagram also defines the reliability functions for the purpose of FMEA 1

  19. Plastic deformation in Al (Cu) interconnects stressed by electromigration and studied by synchrotron polychromatic X-ray microdiffraction

    E-Print Network [OSTI]

    Chen, Kai; Advanced Light Source; UCLA

    2008-01-01T23:59:59.000Z

    Plastic deformation in Al (Cu) interconnects stressed bygrain orientation [7], study plastic deformation [12-15] andThis aspect of EM-induced plastic deformation in grains

  20. Reliability-based casing design

    SciTech Connect (OSTI)

    Maes, M.A. [Univ. of Calgary, Alberta (Canada). Civil Engineering Dept.; Gulati, K.C.; Johnson, R.C. [Mobil Research and Development Corp., Dallas, TX (United States); McKenna, D.L. [Mobil Producing Nigeria, Lagos (Nigeria); Brand, P.R.; Lewis, D.B. [Mobil E and P Technical Center, Dallas, TX (United States)

    1995-06-01T23:59:59.000Z

    The present paper describes the development of reliability-based design criteria for oil and/or gas well casing/tubing. The approach is based on the fundamental principles of limit state design. Limit states for tubulars are discussed and specific techniques for the stochastic modeling of loading and resistance variables are described. Zonation methods and calibration techniques are developed which are geared specifically to the characteristic tubular design for both hydrocarbon drilling and production applications. The application of quantitative risk analysis to the development of risk-consistent design criteria is shown to be a major and necessary step forward in achieving more economic tubular design.

  1. Dispatcher Reliability Analysis : SPICA-RAIL Experiments

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    consider that humans are fully reliable. But experience shows that many accidents involve human failuresDispatcher Reliability Analysis : SPICA-RAIL Experiments Fabien Belmonte, Jean-Louis Boulanger of scenarios and evaluate the behaviour of human operators. A state of the art in human reliability is pre

  2. RELIABILITY-BASED CASTING PROCESS DESIGN OPTIMIZATION

    E-Print Network [OSTI]

    Beckermann, Christoph

    RELIABILITY-BASED CASTING PROCESS DESIGN OPTIMIZATION Richard Hardin1 , K.K. Choi1 , and Christoph 52242-1527 Keywords: Casting Process Design, Optimization, Reliability-Based Design Optimization purpose reliability-based design optimization (RBDO) software tool previously developed at the University

  3. Nematode faunal analysis in an aquic brown soil fertilised with slow-release urea, Northeast China

    E-Print Network [OSTI]

    Neher, Deborah A.

    Nematode faunal analysis in an aquic brown soil fertilised with slow-release urea, Northeast China, Institute of Applied Ecology, Chinese Academy of Sciences, Shenyang 110016, PR China b Department of Earth of the Chinese Academy of Sciences, Beijing 100039, PR China Received 14 May 2004; received in revised form 15

  4. Developing a Sustainable Forest Biomass Industry: Case of the US Northeast

    E-Print Network [OSTI]

    Schweik, Charles M.

    . Keywords: forest biomass, sustainable, renewable energy, supply, harvest, forest landowners, socialDeveloping a Sustainable Forest Biomass Industry: Case of the US Northeast D. Damery1 , J. Benjamin in renewable energy has produced a spate of new research into the feasibility of forest biomass as a feedstock

  5. with Tufts Center for Animals and Public Policy present 2014 NORTHEAST WILD HORSE ADOPTION

    E-Print Network [OSTI]

    Dennett, Daniel

    with Tufts Center for Animals and Public Policy present 2014 NORTHEAST WILD HORSE ADOPTION Management Wild Horses Friday, March 28 7:00PM­ 9:00PM Viewing of "Wild Horse, Wild Ride" and Discussion of Extreme Mustang Makeover (free and open to the public in Varis Lecture Hall) -Kris and Nik Kokal, Horse

  6. Palaeoproterozoic arc magmatism and collision in Liaodong Peninsula (north-east China)

    E-Print Network [OSTI]

    Demouchy, Sylvie

    Palaeoproterozoic arc magmatism and collision in Liaodong Peninsula (north-east China) Michel Faure, LTE, Chinese Academy of Sciences PO Box 9525 Beijing, 100029, China; 3 Department of Earth-eastern China and discusses its possible geo- dynamic setting in terms of subduc- tion and collision. Geological

  7. PIRATA Northeast Extension 2008 Cruise Report Dakar, Senegal to Dakar, Senegal

    E-Print Network [OSTI]

    PIRATA Northeast Extension 2008 Cruise Report R/V Antea Dakar, Senegal to Dakar, Senegal Chief. NOAA arranged a smaller-scale cruise by chartering the French R/V Antea in October 2008 through GENAVIR, the French organization that operates the Antea. This cruise focused upon servicing the PNE moorings

  8. The variability of methane, nitrous oxide and sulfur hexafluoride in Northeast India*

    E-Print Network [OSTI]

    The variability of methane, nitrous oxide and sulfur hexafluoride in Northeast India* A.L. Ganesan Program on the Science and Policy of Global Change combines cutting-edge scientific research with independent policy analysis to provide a solid foundation for the public and private decisions needed

  9. Numerical simulation and sensitivity study of a severe hailstorm in northeast Spain

    E-Print Network [OSTI]

    Romero, Romu

    Numerical simulation and sensitivity study of a severe hailstorm in northeast Spain E. GarcĂ­a AtmĂłsfera, Instituto de Medio Ambiente, Universidad de LeĂłn, 24071 LeĂłn, Spain b Grup de Meteorologia, Departament de FĂ­sica, Universitat de les Illes Balears, Palma de Mallorca, Spain Accepted 8 August 2005

  10. Historical perspective on seismic hazard to Hispaniola and the northeast Caribbean region

    E-Print Network [OSTI]

    ten Brink, Uri S.

    Historical perspective on seismic hazard to Hispaniola and the northeast Caribbean region Uri S earthquake intensity, magnitude, and distance from the reported damage to the epicenter, for Hispaniola and for Puerto Rico and the Virgin Islands. The attenuation relationship for Hispaniola earthquakes and northern

  11. New interpretation of the so-called Nubian strata in northeast Africa

    SciTech Connect (OSTI)

    Klitzsch, E.H.; Squyres, C.H.

    1988-08-01T23:59:59.000Z

    Stratigraphical interpretation of the so-called Nubian Sandstone of Egypt and northern Sudan have led to new ideas on the structural and paleogeographical development of northeast Africa. The strata formerly comprised under the term Nubian Sandstone include sediments from Cambrian to Paleocene age. Based on field work and paleontological investigations during the last 10 years, these strata can be subdivided into three major cycles, each characterizing a certain structural situation of northeast Africa. The first or Paleozoic cycle comprises strata of Cambrian to Early Carboniferous age. These strata were deposited during a period of generally northern dip of northeast Africa; continental sediments transported northward interfinger with marine strata resulting from southward transgressions. Sediments of the second cycle were deposited during and after Gondwana and northern continents collided, which caused updoming of large areas of Egypt and bordering areas to the west and east. As a result, most of Egypt became subject to erosion; transgressions remained near the present northern edge of the continent, and purely continental deposition took place in northern Sudan and bordering areas in Chad and Libya. The resulting strata are similar to the Karroo of East Africa. Strata of the third cycle were deposited after Pangea began to disintegrate. Northeast Africa now had a generally northern dip again, and consequently deposition was controlled - as during the first cycle - by northward drainage and southward transgressions. This last cycle began during Late Jurassic time.

  12. RURAL POVERTY AND DIVERSIFICATION OF FARMING SYSTEMS IN UPPER NORTHEAST THAILAND.

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    RURAL POVERTY AND DIVERSIFICATION OF FARMING SYSTEMS IN UPPER NORTHEAST THAILAND. C. BARNAUD 1 , G and government support to help them catch-up is still needed. INTRODUCTION Unacceptable levels of poverty the seriousness of the situation. But a fundamental question remains: How can we reduce poverty, particularly

  13. Northeast regional biomass program. Second & third quarterly reports, October 1, 1995--March 31, 1996

    SciTech Connect (OSTI)

    NONE

    1996-07-01T23:59:59.000Z

    The Northeast Regional Biomass Program (NRBP) is comprised of the following states: Connecticut. Delaware, Maine, Maryland, Massachusetts, New Hampshire, New Jersey, New York, Pennsylvania, Rhode Island and Vermont. It is managed for the Department of Energy (DOE) by the CONEG Policy Research Center, Inc. The Northeast states face several near-term barriers to the expanded use of biomass energy. Informational and technical barriers have impeded industrial conversions, delaying the development of a wood energy supply infrastructure. Concern over the environmental impacts on resources are not well understood. Public awareness and concern about safety issues surrounding wood energy use has also grown to the point of applying a brake to the trend of increases in residential applications of biomass energy. In addition, many residential, industrial, and commercial energy users are discouraged from using biomass energy because of the convenience factor. Regardless of the potential for cost savings, biomass energy sources, aside from being perceived as more esoteric, are also viewed as more work for the user. The Northeast Regional Biomass Program (NRBP) is designed to help the eleven Northeastern states overcome these obstacles and achieve their biomass energy potentials. The objective of this program in the current and future years is to increase the role of biomass fuels in the region`s energy mix by providing the impetus for states and the private sector to develop a viable Northeast biomass fuels market.

  14. Interconnecting network for switching data packets and method for switching data packets

    DOE Patents [OSTI]

    Benner, Alan Frederic; Minkenberg, Cyriel Johan Agnes; Stunkel, Craig Brian

    2010-05-25T23:59:59.000Z

    The interconnecting network for switching data packets, having data and flow control information, comprises a local packet switch element (S1) with local input buffers (I(1,1) . . . I(1,y)) for buffering the incoming data packets, a remote packet switch element (S2) with remote input buffers (I(2,1) . . . I(2,y)) for buffering the incoming data packets, and data lines (L) for interconnecting the local and the remote packet switch elements (S1, S2). The interconnecting network further comprises a local and a remote arbiter (A1, A2) which are connected via control lines (CL) to the input buffers (I(1,1) . . . I(1,y), I(2,1) . . . I(2,y)), and which are formed such that they can provide that the flow control information is transmitted via the data lines (L) and the control lines (CL).

  15. OPTIMAL RELIABILITY ALLOCATION IN SERIES-PARALLEL SYSTEMS FROM COMPONENTS' DISCRETE COST -RELIABILITY DATA SETS

    E-Print Network [OSTI]

    Smith, Alice E.

    is not known. Instead, we consider the more realistic assumption of discrete cost-reliability data sets expressions for cost-reliability curves, we consider discrete cost-reliability data sets for each componentOPTIMAL RELIABILITY ALLOCATION IN SERIES-PARALLEL SYSTEMS FROM COMPONENTS' DISCRETE COST

  16. Software reliability models for critical applications

    SciTech Connect (OSTI)

    Pham, H.; Pham, M.

    1991-12-01T23:59:59.000Z

    This report presents the results of the first phase of the ongoing EG G Idaho, Inc. Software Reliability Research Program. The program is studying the existing software reliability models and proposes a state-of-the-art software reliability model that is relevant to the nuclear reactor control environment. This report consists of three parts: (1) summaries of the literature review of existing software reliability and fault tolerant software reliability models and their related issues, (2) proposed technique for software reliability enhancement, and (3) general discussion and future research. The development of this proposed state-of-the-art software reliability model will be performed in the second place. 407 refs., 4 figs., 2 tabs.

  17. Software reliability models for critical applications

    SciTech Connect (OSTI)

    Pham, H.; Pham, M.

    1991-12-01T23:59:59.000Z

    This report presents the results of the first phase of the ongoing EG&G Idaho, Inc. Software Reliability Research Program. The program is studying the existing software reliability models and proposes a state-of-the-art software reliability model that is relevant to the nuclear reactor control environment. This report consists of three parts: (1) summaries of the literature review of existing software reliability and fault tolerant software reliability models and their related issues, (2) proposed technique for software reliability enhancement, and (3) general discussion and future research. The development of this proposed state-of-the-art software reliability model will be performed in the second place. 407 refs., 4 figs., 2 tabs.

  18. Planarization of metal films for multilevel interconnects by pulsed laser heating

    DOE Patents [OSTI]

    Tuckerman, David B. (Livermore, CA)

    1987-01-01T23:59:59.000Z

    In the fabrication of multilevel integrated circuits, each metal layer is planarized by heating to momentarily melt the layer. The layer is melted by sweeping laser pulses of suitable width, typically about 1 microsecond duration, over the layer in small increments. The planarization of each metal layer eliminates irregular and discontinuous conditions between successive layers. The planarization method is particularly applicable to circuits having ground or power planes and allows for multilevel interconnects. Dielectric layers can also be planarized to produce a fully planar multilevel interconnect structure. The method is useful for the fabrication of VLSI circuits, particularly for wafer-scale integration.

  19. Proposal to negotiate amendments to an existing contract for the assembly of interconnections for the LHC

    E-Print Network [OSTI]

    2006-01-01T23:59:59.000Z

    This document concerns the proposal to negotiate amendments to the existing contract for the assembly of interconnections for the LHC. For the reasons explained in this document, the Finance Committee is invited to approve amendments to the existing contract with the consortium INEO (FR), ENDEL (FR) and GTI (NL) for the assembly of interconnections for the LHC for a total amount of 5 181 403 euros (8 095 424 Swiss francs), subject to revision, bringing the total amount of the contract to a maximum of 14 974 239 euros (23 395 751 Swiss francs), subject to revision. The amounts in Swiss francs have been calculated using the present rate of exchange.

  20. Wind/PV Generation for Frequency Regulation and Oscillation Damping in the Eastern Interconnection

    SciTech Connect (OSTI)

    Liu, Yong [The University of Tennessee, Knoxville; Gracia, Jose R [ORNL; Hadley, Stanton W [ORNL; Liu, Yilu [ORNL

    2013-12-01T23:59:59.000Z

    This report presents the control of renewable energy sources, including the variable-speed wind generators and solar photovoltaic (PV) generators, for frequency regulation and inter-area oscillation damping in the U.S. Eastern Interconnection (EI). In this report, based on the user-defined wind/PV generator electrical control model and the 16,000-bus Eastern Interconnection dynamic model, the additional controllers for frequency regulation and inter-area oscillation damping are developed and incorporated and the potential contributions of renewable energy sources to the EI system frequency regulation and inter-area oscillation damping are evaluated.

  1. Method of bonding an interconnection layer on an electrode of an electrochemical cell

    DOE Patents [OSTI]

    Pal, U.B.; Isenberg, A.O.; Folser, G.R.

    1992-01-14T23:59:59.000Z

    An electrochemical cell containing an air electrode, contacting electrolyte and electronically conductive interconnection layer, and a fuel electrode, has the interconnection layer attached by: (A) applying a thin, closely packed, discrete layer of LaCrO[sub 3] particles, doped with an element selected from the group consisting of Ca, Sr, Co, Ba, Mg and their mixtures on a portion of the air electrode, and then (B) electrochemical vapor depositing a dense skeletal structure between and around the doped LaCrO[sub 3] particles. 2 figs.

  2. Development of Readout Interconnections for the Si-W Calorimeter of SiD

    SciTech Connect (OSTI)

    Woods, M.; Fields, R.G.; Holbrook, B.; Lander, R.L.; Moskaleva, A.; Neher, C.; Pasner, J.; Tripathi, M.; /UC, Davis; Brau, J.E.; Frey, R.E.; Strom, D.; /Oregon U.; Breidenbach, M.; Freytag, D.; Haller, G.; Herbst, R.; Nelson, T.; /SLAC; Schier, S.; Schumm, B.; /UC, Santa Cruz

    2012-09-14T23:59:59.000Z

    The SiD collaboration is developing a Si-W sampling electromagnetic calorimeter, with anticipated application for the International Linear Collider. Assembling the modules for such a detector will involve special bonding technologies for the interconnections, especially for attaching a silicon detector wafer to a flex cable readout bus. We review the interconnect technologies involved, including oxidation removal processes, pad surface preparation, solder ball selection and placement, and bond quality assurance. Our results show that solder ball bonding is a promising technique for the Si-W ECAL, and unresolved issues are being addressed.

  3. Electricity Delivery and Energy Reliability | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electricity Delivery and Energy Reliability Electricity Delivery and Energy Reliability information about the delivery of electricity and energy reliability Electricity Delivery...

  4. Microgrids and Heterogeneous Security, Quality, Reliability, and Availability

    E-Print Network [OSTI]

    Marnay, Chris

    2007-01-01T23:59:59.000Z

    quality, reliability, and availability,” IEEE Power & EnergyReliability, and Availability Chris Marnay EnvironmentalQuality, Reliability, and Availability C. Marnay Ernest

  5. Reliable computation of homogeneous azeotropes

    SciTech Connect (OSTI)

    Maier, R.W.; Brennecke, J.F.; Stadtherr, M.A. [Univ. of Notre Dame, IN (United States). Dept. of Chemical Engineering] [Univ. of Notre Dame, IN (United States). Dept. of Chemical Engineering

    1998-08-01T23:59:59.000Z

    It is important to determine the existence and composition of homogeneous azeotropes in the analysis of phase behavior and in the synthesis and design of separation systems, from both theoretical and practical standpoints. A new method for reliably locating any and all homogeneous azeotropes for multicomponent mixtures is presented. The method also verifies the nonexistence of homogeneous azeotropes if none are present. The method is based on interval analysis, in particular an interval-Newton/generalized-bisection-algorithm providing a mathematical and computational guarantee that all azeotropes are located. This general-purpose technique can be applied in connection with any thermodynamic models. The technique is illustrated in several example problems using the Wilson, NRTL, and UNIQUAC activity-coefficient models.

  6. Analysis of drought impacts on electricity production in the Western and Texas interconnections of the United States.

    SciTech Connect (OSTI)

    Harto, C. B.; Yan, Y. E.; Demissie, Y. K.; Elcock, D.; Tidwell, V. C.; Hallett, K.; Macknick, J.; Wigmosta, M. S.; Tesfa, T. K. (Environmental Science Division); (Sandia National Laboratory); (National Renewable Energy Laboratory); (Pacific Northwest National Laboratory)

    2012-02-09T23:59:59.000Z

    Electricity generation relies heavily on water resources and their availability. To examine the interdependence of energy and water in the electricity context, the impacts of a severe drought to assess the risk posed by drought to electricity generation within the western and Texas interconnections has been examined. The historical drought patterns in the western United States were analyzed, and the risk posed by drought to electricity generation within the region was evaluated. The results of this effort will be used to develop scenarios for medium- and long-term transmission modeling and planning efforts by the Western Electricity Coordination Council (WECC) and the Electric Reliability Council of Texas (ERCOT). The study was performed in response to a request developed by the Western Governors Association in conjunction with the transmission modeling teams at the participating interconnections. It is part of a U.S. Department of Energy-sponsored, national laboratory-led research effort to develop tools related to the interdependency of energy and water as part of a larger interconnection-wide transmission planning project funded under the American Recovery and Reinvestment Act. This study accomplished three main objectives. It provided a thorough literature review of recent studies of drought and the potential implications for electricity generation. It analyzed historical drought patterns in the western United States and used the results to develop three design drought scenarios. Finally, it quantified the risk to electricity generation for each of eight basins for each of the three drought scenarios and considered the implications for transmission planning. Literature on drought impacts on electricity generation describes a number of examples where hydroelectric generation capacity has been limited because of drought but only a few examples of impact on thermoelectric generation. In all documented cases, shortfalls of generation were met by purchasing power from the market, albeit at higher prices. However, sufficient excess generation and transmission must be available for this strategy to work. Although power purchase was the most commonly discussed drought mitigation strategy, a total of 12 response strategies were identified in the literature, falling into four main categories: electricity supply, electricity demand response, alternative water supplies, and water demand response. Three hydrological drought scenarios were developed based on a literature review and historical data analysis. The literature review helped to identify key drought parameters and data on drought frequency and severity. Historical hydrological drought data were analyzed for the western United States to identify potential drought correlations and estimate drought parameters. The first scenario was a West-wide drought occurring in 1977; it represented a severe drought in five of the eight basins in the study area. A second drought scenario was artificially defined by selecting the conditions from the 10th-percentile drought year for each individual basin; this drought was defined in this way to allow more consistent analysis of risk to electricity generation in each basin. The final scenario was based upon the current low-flow hydro modeling scenario defined by WECC, which uses conditions from the year 2001. These scenarios were then used to quantify the risk to electricity generation in each basin. The risk calculations represent a first-order estimate of the maximum amount of electricity generation that might be lost from both hydroelectric and thermoelectric sources under a worst-case scenario. Even with the conservative methodology used, the majority of basins showed a limited amount of risk under most scenarios. The level of risk in these basins is likely to be amenable to mitigation by known strategies, combined with existing reserve generation and transmission capacity. However, the risks to the Pacific Northwest and Texas Basins require further study. The Pacific Northwest is vulnerable because of its heavy reliance on hydroelectri

  7. Three-Dimensional Analysis of Solid Oxide Fuel Cell Ni-YSZ Anode Interconnectivity James R. Wilson,a

    E-Print Network [OSTI]

    Kalies, William D.

    of interconnectivity of solid-oxide fuel cell (SOFC) electrode phases. The method was applied to the three1 Three-Dimensional Analysis of Solid Oxide Fuel Cell Ni-YSZ Anode Interconnectivity James R, and hence was not electrochemically active. #12;2 1. Introduction Attempts to understand solid oxide fuel

  8. Abstract--The security of modern large interconnected power systems suffers from the absence of a unique security coordinator

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 Abstract-- The security of modern large interconnected power systems suffers from the absence interconnected power systems. In the absence of a full information exchange, the operators' alternative solution contingencies screening , control areas data exchange, multi-area electric power system security assessment. I

  9. Seventh International Dielectrics and Conductors for ULSI Multilevel Interconnection Conference (DCMIC), Santa Clara, CA, March 5-9, 2001, pp. 38-50.

    E-Print Network [OSTI]

    and signal transmission through the interconnects in VLSI circuits due to self-heating (or Joule heating interconnects due to self-heating phenomenon can also limit the maximum allowed average current density, javg

  10. Distributed state estimation and model predictive control of linear interconnected system

    E-Print Network [OSTI]

    Boyer, Edmond

    requirements, modern control systems are becoming more and more complex. For these processes, different controlDistributed state estimation and model predictive control of linear interconnected system: In this paper, a distributed and networked control system architecture based on independent Model Predictive

  11. Electrically interconnected assemblies of microscale device components by printing and molding

    E-Print Network [OSTI]

    Rogers, John A.

    of the underlying aspects and application to representative systems in photovoltaics and solid state lighting approaches for assembly and electrical interconnection of micro/nanoscale devices into functional systems, and photovoltaics can be formed with assemblies of micro/nanoscale components or material ele- ments to achieve

  12. EIS-0485: Interconnection of the Grande Prairie Wind Farm, Holt County, Nebraska

    Broader source: Energy.gov [DOE]

    DOE’s Western Area Power Administration is preparing an EIS to evaluate the environmental impacts of interconnecting the proposed Grande Prairie Wind Farm, in Holt County, near O’Neill, Nebraska, to Western’s power transmission system. The project website is http://www.wapa.gov/ugp/Environment/GrandePrairie.htm.

  13. WHAT IS A NETWORK? (Gas and Electricity) A complex, interconnected group or

    E-Print Network [OSTI]

    Wright, Francis

    WHAT IS A NETWORK? (Gas and Electricity) A complex, interconnected group or system Electricity and Gas: A system used to distribute electricity and gas around the world/certain area, by compromising to minimise costs and generate the most electricity and gas as possible, which maximises profits

  14. A Self-Reconfigurable Lightweight Interconnect for Scalable Processor Fabrics Heiner Giefers and Marco Platzner

    E-Print Network [OSTI]

    Hellebrand, Sybille

    , on the processor array. We prototype the processor fabric on FPGA technology and analyze the efficiency of our many, energy, and execution time. Therefore it is of high interest to also study alternative interconnects, the communication infrastructure incurs low over- heads in terms of energy and area, particularly compared to packet

  15. Advanced Unit Commitment Strategies for the U.S. Eastern Interconnection: Preprint

    SciTech Connect (OSTI)

    Ela, E.; Milligan, M.; Meibom, P.; Barth, R.; Tuohy, A.

    2010-10-01T23:59:59.000Z

    This paper outlines a study undertaken for the U.S. Eastern Interconnection in which different advanced unit commitment strategies were simulated for three different years to evaluate the benefits that may occur from using these strategies as an operational tool.

  16. An energy vision: the transformation towards sustainability --interconnected challenges and solutions

    E-Print Network [OSTI]

    Silver, Whendee

    (RCPs) [2 ], the International Energy Agency's World Energy Outlook [3,4 ], and several modeAn energy vision: the transformation towards sustainability -- interconnected challenges Nilsson8 and KR Smith9 The energy system is currently facing a number of challenges, most notably high

  17. Solid oxide fuel cell with single material for electrodes and interconnect

    DOE Patents [OSTI]

    McPheeters, C.C.; Nelson, P.A.; Dees, D.W.

    1994-07-19T23:59:59.000Z

    A solid oxide fuel cell is described having a plurality of individual cells. A solid oxide fuel cell has an anode and a cathode with electrolyte disposed there between, and the anode, cathode and interconnect elements are comprised of substantially one material. 9 figs.

  18. EA-1884: Invenergy Interconnection for the Wray Wind Energy Project, Town of Wray, Yuma County, CO

    Broader source: Energy.gov [DOE]

    DOE’s Western Area Power Administration is preparing this EA to evaluate the environmental impacts of interconnecting the proposed Wray Wind Energy Project, for approximately 90 megawatts of wind generation, to Western’s existing Wray Substation in Yuma County, Colorado.

  19. 3-Dimensional, Solder-Free Interconnect Technology for High-Performance Power Modules

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    , published in "Conference on Integrated Power Systems (CIPS), Nuremberg : Germany (2012)" #12;dimensional (3D) packaging of power modules in a compact stacked layer structure [3], [4], [5]. The proposed technologies can3-Dimensional, Solder-Free Interconnect Technology for High- Performance Power Modules Bassem

  20. ELECTRIFICATION OF ISOLATED AREAS BY INTERCONNECTING DIFFERENT RENEWABLE SOURCES OF ENERGY: A SUSTANAIBLE APPROACH

    E-Print Network [OSTI]

    of a methodology for rural electrification by micro-grids based upon different renewable resources. > Application to absorb innovations such as rural electrification by isolated micro grid Sustainable approach The successELECTRIFICATION OF ISOLATED AREAS BY INTERCONNECTING DIFFERENT RENEWABLE SOURCES OF ENERGY

  1. Analyzing Ultra-Scale Application Communication Requirements for a Reconfigurable Hybrid Interconnect

    E-Print Network [OSTI]

    dependent on scaling up to unprecedented numbers of processors. To prevent the interconnect architecture be and/or a fee. . peta-scale computing is increasingly dependent on scaling up the number of processors, there is a critical need to ef- fectively build and utilize network topology solutions with costs that scale linearly

  2. Analog/RF Design Techniques for High Performance Nanoelectronic On-Chip Interconnects

    E-Print Network [OSTI]

    Liu, Bao

    explores this possibility, espe- cially, application of two analog/RF design techniques as fol- low. 1- mance nanoelectronic on-chip interconnects: (1) application of distributed amplifiers for signal. Application of distributed amplifiers for signal attenua- tion reduction in high performance nanoelectronic on

  3. On-line Fault Detection and Location for NoC Interconnects Cristian Grecu1

    E-Print Network [OSTI]

    Pande, Partha Pratim

    On-line Fault Detection and Location for NoC Interconnects Cristian Grecu1 , André Ivanov1 , Res-line fault detection and location in Network-on-chip (NoC) communication fabrics is introduced. This approachC-based chips. These factors motivated us to develop a method for concurrent error detection and location for No

  4. Transparent, Low Power Optical WDM Interface for Off-Chip Interconnects

    E-Print Network [OSTI]

    Bergman, Keren

    , and other related circuitry (e.g. for thermal stability). In CMOS technology [6], the total power dissipated static power dissipation of the interface. The dynamic power is proportional to the gate capacitance (CTransparent, Low Power Optical WDM Interface for Off-Chip Interconnects Odile Liboiron

  5. Modeling and Simulation Environment for Photonic Interconnection Networks in High Performance Computing

    E-Print Network [OSTI]

    Bergman, Keren

    at the scale of high performance computer clusters and warehouse scale data centers, system level simulations and results for rack scale photonic interconnection networks for high performance computing. Keywords: optical to the newsworthy power consumption [3], latency [4] and bandwidth challenges [5] of high performance computing (HPC

  6. Changing photovoltaic array interconnections to reduce mismatch losses: a case study

    E-Print Network [OSTI]

    Boyer, Edmond

    ) ­ Grenoble, France **Grupo de Investigacion y Desarollo en Energia Solar y Automatica (IDEA) ­ Jaén, Spain a wide variety of plants ranging from utility-sized solar trackers to residential building-integrated PV, resulting in lower energy production yields. The traditional series-parallel interconnection scheme of solar

  7. High-Level Power Estimation with Interconnect Effects Kavel M. Buyuksahin

    E-Print Network [OSTI]

    Najm, Farid N.

    the predicted (at RTL) power against that measured using SPICE. An average er- ror of 14.4% is obtainedHigh-Level Power Estimation with Interconnect Effects Kavel M. B¨uy¨uks¸ahin ECE Dept.najm@toronto.edu ABSTRACT We extend earlier work on high-level average power esti- mation to include the power due

  8. Impact of Wind Turbine Penetration on the Dynamic Performance of Interconnected Power Systems

    E-Print Network [OSTI]

    Pota, Himanshu Roy

    Impact of Wind Turbine Penetration on the Dynamic Performance of Interconnected Power Systems M. J School of S ~ao Carlos, Brazil. Email: ramos@sel.eese.usp.br Abstract--The complexity of power systems, such as wind generators. This changing nature of power systems has considerable effect on its dynamic behaviour

  9. Power Reduction of CMP Communication Networks via RF-Interconnects M-C. Frank Chang

    E-Print Network [OSTI]

    Cong, Jason "Jingsheng"

    latency and low energy consumption [5][7]. RF-I transmission lines provide single-cycle crossPower Reduction of CMP Communication Networks via RF-Interconnects M-C. Frank Chang , Jason Cong}@cs.ucla.edu Electrical Engineering Department, UCLA. {mfchang, socher, roccotam}@ee.ucla.edu Abstract As chip

  10. A THz transverse electromagnetic mode two-dimensional interconnect layer incorporating quasi-optics

    E-Print Network [OSTI]

    of transmitting subpicosecond pulses in the transverse electromagnetic TEM mode over arbitrarily long paths near the cutoff fre- quency. Such pulse broadening does not occur for the trans- verse electromagneticA THz transverse electromagnetic mode two-dimensional interconnect layer incorporating quasi

  11. Interconnected Slums: Water, Sanitation and Health in Abidjan, Co^te d'Ivoire

    E-Print Network [OSTI]

    Richner, Heinz

    Interconnected Slums: Water, Sanitation and Health in Abidjan, Co^te d'Ivoire BRIGIT OBRIST, GUE contributed to this paper are: Gue´ladio Cisse´ (Centre Suisse de Recherches Scientifiques, Abidjan, Co^te d'Ivoire´tude de cas comparative, il examine les re´ponses aux proble`mes environnementaux dans un contexte aussi

  12. Data-Dependent Jitter and Crosstalk-Induced Bounded Uncorrelated Jitter in Copper Interconnects

    E-Print Network [OSTI]

    Hajimiri, Ali

    Data-Dependent Jitter and Crosstalk-Induced Bounded Uncorrelated Jitter in Copper Interconnects Abstract -- This paper resolves the jitter impairment of non-return-to-zero data in transmission lines. The limited bandwidth of the transmission line introduces data- dependent jitter. Crosstalk between

  13. CarPal: interconnecting overlay networks for a community-driven shared mobility

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    CarPal: interconnecting overlay networks for a community-driven shared mobility VincenzoName.lastName@sophia.inria.fr Abstract. Car sharing and car pooling have proven to be an effective solution to reduce the amount of such effectiveness. Keywords. Peer to peer, overlay networks, case study, information retrieval, car sharing 1

  14. Optimum Repeater InsertionBased on a CMOSDelay Model for On-ChipRLC Interconnect

    E-Print Network [OSTI]

    Ismail, Yehea

    Abstract-A closed form expressionfor the propagationdelay of a CMOS gate driving a distributed RLC line is to provide an accurate estimation of the propagationdelay of nonlinearCMOS gates driving distributedRLC lines if inductance is neglectedand the interconnect is treated as a distributed RC line can be over 30%for present on

  15. Optimum Repeater Insertion Based on a CMOS Delay Model for OnChip RLC Interconnect

    E-Print Network [OSTI]

    Ismail, Yehea

    Abstract ­ A closed form expression for the propagation delay of a CMOS gate driving a distributed RLC line of the propagation delay of nonlinear CMOS gates driving distributed RLC lines as well as to develop design if inductance is neglected and the interconnect is treated as a distributed RC line can be over 30% for present

  16. ACTIVE SUBSTRATES FOR OPTOELECTRONIC INTERCONNECT Donald Chiarulli, Steven Levitan, Jason Bakos

    E-Print Network [OSTI]

    Bakos, Jason D.

    silicon on sapphire technology and the adaptation of laser drilling techniques to create vias through goal is a new solution to one of the most difficult problems associated with the packaging of chip and electrically compatible with current ball grid array (BGA) technology for electronic interconnect, and provides

  17. Optimization and Visualization of the North American Eastern Interconnect Power Market

    E-Print Network [OSTI]

    Optimization and Visualization of the North American Eastern Interconnect Power Market Douglas R. Hale DHALE@eia.doe.gov U.S. Energy Information Agency Washington, DC 20585 USA Thomas J. Overbye. Introduction The road to competitive electricity markets in the United States is becoming littered

  18. Discrete-time Lyapunov based small-gain theorem for parameterized interconnected ISS systems

    E-Print Network [OSTI]

    Nesic, Dragan

    Discrete-time Lyapunov based small-gain theorem for parameterized interconnected ISS systems Dina via the Lyapunov method. In particular, an ISS Lyapunov function for the overall system is constructed from the ISS Lyapunov functions of the two subsystems. We consider parameterized families of discrete

  19. Assessment of the potential diversion of air passengers to high-speed rail in the northeast corridor

    E-Print Network [OSTI]

    Clarke, Michael D. D.

    1994-01-01T23:59:59.000Z

    The high level of intercity passenger travel in the Northeast Corridor is supported by densely populated metropolitan city-centers, the suitable distance between the urban areas, and the extent to which economic and social ...

  20. Intercity passenger rail productivity in the Northeast Corridor : implications for the future of high-speed Rail

    E-Print Network [OSTI]

    Archila Téllez, Andrés Felipe

    2013-01-01T23:59:59.000Z

    The ongoing discussion about the future implementation of high-speed rail (HSR) in the Northeast Corridor (NEC) is full of questions on the feasibility of HSR and the ability of Amtrak to implement it. Indeed, the introduction ...

  1. Aquatic Studies at the Proposed George Parkhouse I Reservoir Site on the South Sulphur River in Northeast Texas 

    E-Print Network [OSTI]

    Gelwick, Frances P.; Burgess, Christine C.

    2002-12-31T23:59:59.000Z

    Aquatic Studies at the Proposed George Parkhouse I Reservoir Site on the South Sulphur River in Northeast Texas December 31, 2002 Submitted to Texas Water Development Board P.O. Box 13231, Capitol Station 1700 N Congress...

  2. Phase 1 - Evaluation of a Functional Interconnect System for Solid Oxide Fuel Cells

    SciTech Connect (OSTI)

    James M. Rakowski

    2006-09-30T23:59:59.000Z

    This project is focused on evaluating the suitability of materials and complex multi-materials systems for use as solid oxide fuel cell interconnects. ATI Allegheny Ludlum has generated promising results for interconnect materials which incorporate modified surfaces. Methods for producing these surfaces include cladding, which permits the use of novel materials, and modifications via unique thermomechanical processing, which allows for the modification of materials chemistry. The University of Pittsburgh is assisting in this effort by providing use of their in-place facilities for dual atmosphere testing and ASR measurements, along with substantial work to characterize post-exposure specimens. Carnegie Mellon is testing interconnects for chromia scale spallation resistance using macro-scale and nano-scale indentation tests. Chromia spallation can increase electrical resistance to unacceptable levels and interconnect systems must be developed that will not experience spallation within 40,000 hours at operating temperatures. Spallation is one of three interconnect failure mechanisms, the others being excessive growth of the chromia scale (increasing electrical resistance) and scale evaporation (which can poison the cathode). The goal of indentation fracture testing at Carnegie Mellon is to accelerate the evaluation of new interconnect systems (by inducing spalls at after short exposure times) and to use fracture mechanics to understand mechanisms leading to premature interconnect failure by spallation. Tests include bare alloys from ATI and coated systems from DOE Laboratories and industrial partners, using ATI alloy substrates. West Virginia University is working towards developing a cost-effective material for use as a contact material in the cathode chamber of the SOFC. Currently materials such as platinum are well suited for this purpose, but are cost-prohibitive. For the solid-oxide fuel cell to become a commercial reality it is imperative that lower cost components be developed. Based on the results obtained to date, it appears that sterling silver could be an inexpensive, dependable candidate for use as a contacting material in the cathode chamber of the solid-oxide fuel cell. Although data regarding pure silver samples show a lower rate of thickness reduction, the much lower cost of sterling silver makes it an attractive alternative for use in SOFC operation.

  3. F. Karinou et al., "Influence of transmission impairments on the OSMOSIS HPC optical interconnect architecture" 1 Abstract--We examine the impact of transmission

    E-Print Network [OSTI]

    Vlachos, Kyriakos G.

    ) supercomputers (BlueWaters [4] and POWER7-IH [5]) use optical interconnects for inter-rack communication

  4. Power as a function of reliability

    SciTech Connect (OSTI)

    Abate, M.L. [Sandia National Labs., Albuquerque, NM (United States); McCabe, G.P.; Lynch, M.P. [Purdue Univ., Lafayette, IN (United States)

    1995-10-01T23:59:59.000Z

    Many studies employ multiple measurement instruments such as human raters, observers, judges, or mechanical gauges to record subject data. It is well known that the consistency of these instruments, commonly called rater reliability, limits the extent to which conclusions should be drawn from the observed data. However, the degree to which rater reliability limits conclusions has traditionally been assessed in only subjective manners. In this paper, a method is developed for objectively quantifying the impact of rate reliability on the statistical analysis of data from a commonly used collection scheme. This method allows the inclusion of a reliability index in statistical power calculations and is an invaluable tool in the planning of experiments.

  5. General Order Ensuring Reliable Electric Service (Louisiana)

    Broader source: Energy.gov [DOE]

    The standards set forth herein have been developed to provide consumers, the Louisiana Public Service Commission, and jurisdictional electric utilities with a uniform method of ensuring reliable...

  6. Thermoelectric Materials By Design: Mechanical Reliability (Agreement...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    enable improvements in TE device design, optimization, and maximum reliability. * Next year will involve: - Continued TE material database generation. - TE modeling and...

  7. Improving Wind Turbine Gearbox Reliability: Preprint

    SciTech Connect (OSTI)

    Musial, W.; Butterfield, S.; McNiff, B.

    2007-06-01T23:59:59.000Z

    This paper describes a new research and development initiative to improve gearbox reliability in wind turbines begun at the National Renewable Energy Laboratory (NREL) in Golden, Colorado, USA.

  8. RTI International Develops SSL Luminaire Reliability Model |...

    Broader source: Energy.gov (indexed) [DOE]

    is developing and validating accelerated life testing (ALT) methodologies and a reliability model for predicting the lifetime of integrated solid-state lighting...

  9. Electricity Delivery and Energy Reliability PROGRAM DESCRIPTION

    Broader source: Energy.gov (indexed) [DOE]

    (PSA) program provides expert technical assistance to states, tribes and regions on electricity policies, programs and market mechanisms that increase access to reliable,...

  10. Sandia National Laboratories: Inverter Reliablity Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    simulations to look for corresponding changes in behavioral parameters of ... Inverter Reliability Program On December 18, 2012, in As scientists and engineers improve the...

  11. Sandia National Laboratories: PV Reliability Operations Maintenance...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Maintenance database Sandia-Electric Power Research Institute Partnership Publishes Photovoltaic Reliability Report On January 21, 2014, in Energy, Facilities, Grid...

  12. Sandia National Laboratories: PV Systems Reliability

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    fluid phenomena of internal inverter components, and their impact on ... Inverter Reliability Program On December 18, 2012, in As scientists and engineers improve the...

  13. NORTH AMERICAN ELECTRIC RELIABILITY COUNCIL: Preliminary Disturbance...

    Office of Environmental Management (EM)

    Preliminary Disturbance Report The following information represents a partial sequence of events based upon Reliability Coordinator information available to NERC. It is not...

  14. Sandia Energy - Continuous Reliability Enhancement for Wind ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Enhancement for Wind (CREW): Project Update Home Renewable Energy Energy News Wind Energy News & Events Systems Analysis Continuous Reliability Enhancement for Wind (CREW):...

  15. Comments of North American Electric Reliability Corporation ...

    Broader source: Energy.gov (indexed) [DOE]

    currently developing a report, entitled "Reliability Consideration from Integration of Smart Grid" that will address many of the issues raised in the DOE RFI. North American...

  16. Sandia National Laboratories: Materials & Manufacturing Reliability...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Materials & Manufacturing Reliability Program Biofouling Studies on Sandia's Marine Hydrokinetic Coatings Initiated at PNNL's Sequim Bay On June 26, 2014, in Energy, Materials...

  17. Competition and Reliability in North American Electricity Markets...

    Energy Savers [EERE]

    Electricity Markets Technical Workshop Competition and Reliability in North American Electricity Markets Technical Workshop Competition and Reliability in North American...

  18. PV Performance and Reliability Validation Capabilities at Sandia...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Performance and Reliability Validation Capabilities at Sandia National Laboratories PV Performance and Reliability Validation Capabilities at Sandia National Laboratories This...

  19. Evaluation of MHTGR fuel reliability

    SciTech Connect (OSTI)

    Wichner, R.P. [Oak Ridge National Lab., TN (United States); Barthold, W.P. [Barthold Associates, Inc., Knoxville, TN (United States)

    1992-07-01T23:59:59.000Z

    Modular High-Temperature Gas-Cooled Reactor (MHTGR) concepts that house the reactor vessel in a tight but unsealed reactor building place heightened importance on the reliability of the fuel particle coatings as fission product barriers. Though accident consequence analyses continue to show favorable results, the increased dependence on one type of barrier, in addition to a number of other factors, has caused the Nuclear Regulatory Commission (NRC) to consider conservative assumptions regarding fuel behavior. For this purpose, the concept termed ``weak fuel`` has been proposed on an interim basis. ``Weak fuel`` is a penalty imposed on consequence analyses whereby the fuel is assumed to respond less favorably to environmental conditions than predicted by behavioral models. The rationale for adopting this penalty, as well as conditions that would permit its reduction or elimination, are examined in this report. The evaluation includes an examination of possible fuel-manufacturing defects, quality-control procedures for defect detection, and the mechanisms by which fuel defects may lead to failure.

  20. Business and educational partnerships: a study of the International School of the Americas, Northeast Independent School District, San Antonio, Texas

    E-Print Network [OSTI]

    Isbell, Kelly Jeanne

    1995-01-01T23:59:59.000Z

    BUSINESS AND EDUCATIONAL PARTNERSHIPS A STUDY OF THE INTERNATIONAL SCHOOL OF THE AMERICAS, NORTHEAST INDEPENDENT SCHOOL DISTRICT, SAN ANTONIO, TEXAS A Thesis by KELLY JEANNE ISBELL Submitted to the Ofilce of Graduate Studies of Texas A..., NORTHEAST INDEPENDENT SCHOOL DISTRICT, SAN ANTONIO, TEXAS. A Thesis by KELLY JEANNE ISBELL Submitted to Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Approved as to style and content by L iui M...