Powered by Deep Web Technologies
Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

North American Electric Reliability Corporation Interconnections...  

Office of Environmental Management (EM)

North American Electric Reliability Corporation Interconnections North American Electric Reliability Corporation Interconnections Map of the North American Electric Reliability...

2

Preservation of contrasting geothermal gradients across the Caribbean-North America plate  

E-Print Network [OSTI]

Preservation of contrasting geothermal gradients across the Caribbean-North America plate boundary the North American and Caribbean plates, document a sharp cooling age discontinuity across the fault the Caribbean-North America plate boundary (Motagua Fault, Guatemala), Tectonics, 32, 993­1010, doi:10.1002/tect

Paris-Sud XI, Université de

3

NORTH AMERICAN ELECTRIC RELIABILITY COUNCIL: Preliminary Disturbance...  

Broader source: Energy.gov (indexed) [DOE]

NORTH AMERICAN ELECTRIC RELIABILITY COUNCIL: Preliminary Disturbance Report NORTH AMERICAN ELECTRIC RELIABILITY COUNCIL: Preliminary Disturbance Report The following information...

4

Comments of North American Electric Reliability Corporation ...  

Broader source: Energy.gov (indexed) [DOE]

North American Electric Reliability Corporation (NERC) to DOE Smart Grid RFI: Addressing Policy and Logistical Challenges Comments of North American Electric Reliability...

5

Outlook for North American Natural Gas  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

North American Natural Gas For LDC Natural Gas Forum November 11, 2014 | Toronto, Ontario, Canada By Adam Sieminski, Administrator U.S. Energy Information Administration The...

6

North American Electric Reliability Corporation (NERC): Reliability...  

Broader source: Energy.gov (indexed) [DOE]

and winter and summer forecasts; monitors the bulk power systems; and educates, trains, and certifies industry personnel. North American Electric Reliability Corporation...

7

North American Natural Gas Markets  

SciTech Connect (OSTI)

This report summarizes die research by an Energy Modeling Forum working group on the evolution of the North American natural gas markets between now and 2010. The group's findings are based partly on the results of a set of economic models of the natural gas industry that were run for four scenarios representing significantly different conditions: two oil price scenarios (upper and lower), a smaller total US resource base (low US resource case), and increased potential gas demand for electric generation (high US demand case). Several issues, such as the direction of regulatory policy and the size of the gas resource base, were analyzed separately without the use of models.

Not Available

1989-02-01T23:59:59.000Z

8

North American Natural Gas Markets  

SciTech Connect (OSTI)

This report sunnnarizes the research by an Energy Modeling Forum working group on the evolution of the North American natural gas markets between now and 2010. The group's findings are based partly on the results of a set of economic models of the natural gas industry that were run for four scenarios representing significantly different conditions: two oil price scenarios (upper and lower), a smaller total US resource base (low US resource case), and increased potential gas demand for electric generation (high US demand case). Several issues, such as the direction of regulatory policy and the size of the gas resource base, were analyzed separately without the use of models.

Not Available

1988-12-01T23:59:59.000Z

9

North American Society for Trenchless Technology  

E-Print Network [OSTI]

North American Society for Trenchless Technology (NASTT) Bowling Green State University (BGSU Technology Seminar North American Society for Trenchless Technology (NASTT) & Bowling Green State University-Thompson Student Union Bowling Green State University (BGSU) Bowling Green, Ohio February 23-24, 2012 #12;Second

Moore, Paul A.

10

Energy Secretary Moniz Will Host North American Energy Ministers...  

Office of Environmental Management (EM)

three key areas, including: 1) North American data collaboration, 2) Mexico's energy reform and its implications for the North American energy sector, and 3) creating a resilient...

11

North American SynchroPhasor Initiative (NASPI) Technical Report...  

Broader source: Energy.gov (indexed) [DOE]

collaboration between the North American electric industry (utilities, grid operators, vendors and consultants), the North American Electric Reliability Corporation, academics, and...

12

Diesel Engine Strategy & North American Market Challenges, Technology...  

Broader source: Energy.gov (indexed) [DOE]

Engine Strategy & North American Market Challenges, Technology and Growth Diesel Engine Strategy & North American Market Challenges, Technology and Growth Presentation given at the...

13

E-Print Network 3.0 - american-caribbean plate boundary Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

American-Caribbean plate boundary, asthenospheric flow... along the margin of northern South America accommodating east-west South American-Caribbean plate motion... - Caribbean...

14

Single nucleotide polymorphism discovery in elite north american potato germplasm  

E-Print Network [OSTI]

Single nucleotide polymorphism discovery in elite north american potato germplasm Hamilton et al;RESEARCH ARTICLE Open Access Single nucleotide polymorphism discovery in elite north american potato breeding approaches in potato rely almost entirely on phenotypic evaluations; molecular markers

Douches, David S.

15

ELECTROPHORETIC CHARACTERIZATION OF NORTH AMERICAN POTATO CULTIVARSl  

E-Print Network [OSTI]

1991) 767 ELECTROPHORETIC CHARACTERIZATION OF NORTH AMERICAN POTATO CULTIVARSl D. S. Douches identify potato cultivars. Both leafand tuber tissue were sampled in thirteen enzyme systems. Two buffer means to discriminate sexually-derived potato cultivars. Compendio Se analizaron un total de 112

Douches, David S.

16

INVESTIGATION Retrospective View of North American Potato  

E-Print Network [OSTI]

INVESTIGATION Retrospective View of North American Potato (Solanum tuberosum L.) Breeding in the 20, Madison, Wisconsin, 53706 ABSTRACT Cultivated potato (Solanum tuberosum L.), a vegetatively propagated explore the effects of potato breeding at the genome level, we used 8303 single-nucleotide polymorphism

Douches, David S.

17

North American Cross-Border  

E-Print Network [OSTI]

Consumption in USA and Canada 21 Figure 8: Electricity Export as a Fraction of Domestic Consumption in USANorth American Cross-Border Electricity Trade Ian M. Loomis Virginia Center for Coal and Energy ii List of Tables ii List of Figures 1 EXECUTIVE SUMMARY 2 INTRODUCTION 5 ELECTRICITY GENERATION

18

North American Industry Classification System (NAICS) Search Tool  

Broader source: Energy.gov [DOE]

The North American Industry Classification System (NAICS) is the standard used by Federal statistical agencies in classifying business establishments for the purpose of collecting, analyzing, and...

19

Competition and Reliability in North American Electricity Markets...  

Broader source: Energy.gov (indexed) [DOE]

Blackout 2003: Electric System Working Group Technical Conference - Comments and Recommendations Competition and Reliability in North American Energy Markets: Issue Paper Synopses...

20

Competition and Reliability in North American Energy Markets...  

Broader source: Energy.gov (indexed) [DOE]

Energy Markets: Issue Paper Synopses Competition and Reliability in North American Energy Markets: Issue Paper Synopses Jack Casazza, Frank Delea, and George Loehr argue that...

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

North American Standard Level VI Inspection Program Update: Ensuring...  

Office of Environmental Management (EM)

Ensuring Safe Transportation of Radioactive Material Presentation made by Carlisle Smith for the NTSF annual meeting held from May 14-16, 2013 in Buffalo, NY North American...

22

North American Natural Gas Markets. Volume 1  

SciTech Connect (OSTI)

This report sunnnarizes the research by an Energy Modeling Forum working group on the evolution of the North American natural gas markets between now and 2010. The group`s findings are based partly on the results of a set of economic models of the natural gas industry that were run for four scenarios representing significantly different conditions: two oil price scenarios (upper and lower), a smaller total US resource base (low US resource case), and increased potential gas demand for electric generation (high US demand case). Several issues, such as the direction of regulatory policy and the size of the gas resource base, were analyzed separately without the use of models.

Not Available

1988-12-01T23:59:59.000Z

23

North American Natural Gas Markets. Volume 2  

SciTech Connect (OSTI)

This report summarizes die research by an Energy Modeling Forum working group on the evolution of the North American natural gas markets between now and 2010. The group`s findings are based partly on the results of a set of economic models of the natural gas industry that were run for four scenarios representing significantly different conditions: two oil price scenarios (upper and lower), a smaller total US resource base (low US resource case), and increased potential gas demand for electric generation (high US demand case). Several issues, such as the direction of regulatory policy and the size of the gas resource base, were analyzed separately without the use of models.

Not Available

1989-02-01T23:59:59.000Z

24

2005 the North American Solar Challenge  

SciTech Connect (OSTI)

In July 2005 the North American Solar Challenge (NASC) featured university built solar powered cars ran across the United States into Canada. The competition began in Austin, Texas with stops in Weatherford, Texas; Broken Arrow, Oklahoma; Topeka, Kansas; Omaha, Nebraska; Sioux Falls, South Dakota, Fargo, North Dakota; Winnipeg, Manitoba; Brandon, Manitoba; Regina, Saskatchewan; Medicine Hat, Alberta; mainly following U.S. Highway 75 and Canadian Highway 1 to the finish line in Calgary, Alberta, Canada, for a total distance of 2,500 miles. NASC major sponsors include the U.S. Department of Energy (DOE), Natural Resources Canada and DOEs National Renewable Energy Laboratory. The event is designed to inspire young people to pursue careers in science and engineering. NASCs predecessors, the American Solar Challenge and Sunrayce, generally have been held every two years since 1990. With each race, the solar cars travel faster and further with greater reliability. The NASC promotes: -Renewable energy technologies (specifically photovoltaic or solar cells) -Educational excellence in science, engineering and mathematics -Creative integration of technical and scientific expertise across a wide-range of disciplines -Hands-on experience for students and engineers to develop and demonstrate their technical and creative abilities. Safety is the first priority for the NASC. Each team put its car through grueling qualifying and technical inspections. Teams that failed to meet the requirements were not allowed participate. During the race, each team was escorted by lead and chase vehicles sporting rooftop hazard flashers. An official observer accompanied each solar car team to keep it alert to any safety issues.

Dan Eberle

2008-12-22T23:59:59.000Z

25

Supply, Demand, and Export Outlook for North American Oil and...  

Gasoline and Diesel Fuel Update (EIA)

Supply, Demand, and Export Outlook for North American Oil and Gas For Energy Infrastructure Summit September 15, 2014 | Houston, TX By Adam Sieminski, EIA Administrator 0 20 40 60...

26

Upper mantle structure beneath the Caribbean-South American plate boundary from surface wave tomography  

E-Print Network [OSTI]

Upper mantle structure beneath the Caribbean-South American plate boundary from surface wave velocity structure of the crust and upper mantle of the Caribbean-South American boundary region American continental lithosphere, the Venezuelan archipelago, and the Caribbean oceanic lithosphere

Niu, Fenglin

27

High-Energy, Low-Frequency Risk to the North American Bulk Power...  

Energy Savers [EERE]

(June 2010) A Jointly-Commissioned Summary Report of the North American Electric Reliability Corporation and the U.S. Department of Energy's November 2009 Workshop. The North...

28

Proceedings of NAWTEC16 16th Annual North American Waste-to-Energy Conference  

E-Print Network [OSTI]

Proceedings of NAWTEC16 16th Annual North American Waste-to-Energy Conference May 19-21, 2008 Proceedings of NAWTEC16 16th Annual North American Waste-to-Energy Conference May 19-21, 2008, Philadelphia

Columbia University

29

Senior Vice President Jack Kime is currently Senior Vice President of Operations for the North American  

E-Print Network [OSTI]

for the North American Road & Rail business unit of the Swiss based Supply Chain Management Company Kuehne

Lin, Xiaodong

30

North American Hydro | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoading map...(Utility Company) Jump to:City)Norristown, Pennsylvania: EnergyCoating Name: North

31

Petrochem industry expands North American MTBE capacity  

SciTech Connect (OSTI)

This paper reports that petrochemical manufacturers continue to increase methyl tertiary butyl ether (MTBE) capacity in North America. The action reflects refiners' reformulation of gasoline to help reduce auto emissions. Demand for gasoline blending oxygenates such as MTBE is expected to increase as U.S. refiners reconfigure processing trains to produce fuels meeting requirements of the Clean Air Act amendments of 1990. Recent progress includes plans to build an MTBE plant in Mexico and start-ups of plants on the U.S. Gulf Coast and in Canada.

Not Available

1992-10-05T23:59:59.000Z

32

North American Free Trade and U.S. Agriculture  

E-Print Network [OSTI]

North American Free Trade and U.S. Agriculture Parr Rosson, Geoffrey A. Benson, Kirby S. Moulton and Larry D. Sanders* The use of trade agreements to achieve both domestic and international trade policy objectives is increasing. As a result, some U....S. agricultural exports setting a new record in 1996. R i s k M a n a g e men t E d u c a t i o n ? L-5282 RM6-8.0 5-99 *Professor and Extension Economist, The Texas A&M University System; Extension Economists, North Carolina State University, University...

Rosson, C. Parr; Benson, Geoffrey A.; Moulton, Kirby S.; Sanders, Larry D.

1999-06-23T23:59:59.000Z

33

The Central American cold surge: an observational analysis of the deep southward penetration of North American cold fronts  

E-Print Network [OSTI]

THE CENTRAL AMERICAN COLD SURGE: AN OBSERVATIONAL ANALYSIS OF THE DEEP SOUTHWARD PENETRATION OF NORTH AMERICAN COLD FRONTS A Thesis by PHILIP JOHN REDING Submitted to the Office of Graduate Studies of Texas A &M University in partial... fulfillment of the requirements for the degree of MASTER OF SCIENCE December 1992 Major Subject: Meteorology THE CENTRAL AMERICAN COLD SURGE: AN OBSERVATIONAL ANALYSIS OF THE DEEP SOUTHWARD PENETRATION OF NORTH AMERICAN COLD FRONTS A Thesis by PHILIP...

Reding, Philip John

1992-01-01T23:59:59.000Z

34

E-Print Network 3.0 - ancient north american Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Kapteyn Astronomical Institute, Rijksuniversiteit Groningen Collection: Physics 2 Curriculum Vitae Brian M. Kemp Summary: ) Ancient DNA and North American Indian Prehistory...

35

Vehicle Technologies Office Merit Review 2014: North American Power Electronics Supply Chain Analysis  

Broader source: Energy.gov [DOE]

Presentation given by Synthesis Partners at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about North American power...

36

Mantle transition zone beneath the Caribbean-South American plate boundary and its tectonic implications  

E-Print Network [OSTI]

Mantle transition zone beneath the Caribbean-South American plate boundary and its tectonic seismic network of Venezuela to study the mantle transition zone structure beneath the Caribbean Caribbean, the 410-km is featured by a narrow (200 km EW) 25-km uplift extending in the NS direction around

Niu, Fenglin

37

Scale dependence of native and alien species richness in North American floras  

E-Print Network [OSTI]

Scale dependence of native and alien species richness in North American floras Vliv mítka studia na of native and alien species richness in North American flo- ras. ­ Preslia 78: 427­436. I analyzed data from and alien diversity vary as a function of spatial grain. Moving window multi- ple regression revealed

Minnesota, University of

38

NORTH-AMERICAN MP TANDEM ACCELERATORS H. E. WEGNER and P. THIEBERGER (*)  

E-Print Network [OSTI]

1291 NORTH-AMERICAN MP TANDEM ACCELERATORS H. E. WEGNER and P. THIEBERGER (*) Brookhaven National elles. Abstract. 2014 The North-American MP Tandem accelerators are six in number. Serial § 1. Yale; § 2 characteristics of these six tandem accelerators will be discussed in the order of their serial numbers. Upgrade

Boyer, Edmond

39

Ann Reg Sci (2002) 36:483495 North American economic integration and industrial  

E-Print Network [OSTI]

and industrial pollution in North America has focused on the US-Mexico border region. Little attention, howeverAnn Reg Sci (2002) 36:483­495 North American economic integration and industrial pollution integration within North America on industrial pollution intensities within the Great Lake states

Kammen, Daniel M.

40

The Geology of North America as Illustrated by Native American Stories by Robert G. McWilliams 1 The Geology of North America as  

E-Print Network [OSTI]

The Geology of North America as Illustrated by Native American Stories by Robert G. McWilliams 1 The Geology of North America as Illustrated by Native American Stories Robert G. McWilliams Professor Emeritus Department of Geology Miami University Oxford, Ohio 45056 mcwillrg@muohio.edu #12;The Geology of North

Lee Jr., Richard E.

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Proceedings of NAWTEC16 16th Annual North American Waste-to-Energy Conference  

E-Print Network [OSTI]

Proceedings of NAWTEC16 16th Annual North American Waste-to-Energy Conference May 19-21, 2008 city population, Mumbai ranks first, while Tokyo comes in eighth at over 8 million. [8] Proceedings

Columbia University

42

Sub-Seafloor Carbon Dioxide Storage Potential on the Juan de Fuca Plate, Western North America  

SciTech Connect (OSTI)

The Juan de Fuca plate, off the western coast of North America, has been suggested as a site for geological sequestration of waste carbon dioxide because of its many attractive characteristics (high permeability, large storage capacity, reactive rock types). Here we model CO2 injection into fractured basalts comprising the upper several hundred meters of the sub-seafloor basalt reservoir, overlain with low-permeability sediments and a large saline water column, to examine the feasibility of this reservoir for CO2 storage. Our simulations indicate that the sub-seafloor basalts of the Juan de Fuca plate may be an excellent CO2 storage candidate, as multiple trapping mechanisms (hydrodynamic, density inversions, and mineralization) act to keep the CO2 isolated from terrestrial environments. Questions remain about the lateral extent and connectivity of the high permeability basalts; however, the lack of wells or boreholes and thick sediment cover maximize storage potential while minimizing potential leakage pathways. Although promising, more study is needed to determine the economic viability of this option.

Jerry Fairley; Robert Podgorney

2012-11-01T23:59:59.000Z

43

Optimal(Estimation(of(North(American(Methane( Emissions(using(GOSAT(data:(  

E-Print Network [OSTI]

Optimal(Estimation(of(North(American(Methane( Emissions(using(GOSAT(data:( A&Sciences&Division,&Lawrence&Berkeley&National&Laboratory,&Berkeley,&CA,&USA.! *aturner@fas.harvard.edu& Harvard(University( #12;Prior Methane Emissions from EDGARv4.2/Kaplan Major/Gas Waste Coal 0 5 10 15 20 Wetlands Livestock Oil/Gas Landfills Coal North America Global #12;Satellites

Jacob, Daniel J.

44

Copyright 2009 by ASME Proceedings of the 17th Annual North American Waste-to-Energy Conference  

E-Print Network [OSTI]

Copyright © 2009 by ASME Proceedings of the 17th Annual North American Waste-to-Energy Conference on the strengths of past research at Columbia and North Carolina State on recycling, composting, waste- to-energy of each technology has the potential 1 Proceedings of the 17th Annual North American Waste-to-Energy

Columbia University

45

North American Reciprocal Museum List Members from the de Saisset Museum, who present a membership card validated with a gold North American Reciprocal  

E-Print Network [OSTI]

North American Reciprocal Museum List Members from the de Saisset Museum, who present a membership at participating museums: Free/member admission during regular museum hours, member discounts at museum shops, and discounts. on concert/lecture tickets. Please note: Some museums restrict benefits. Please see notes

Schwarz, Thomas

46

Comment submitted by the North American Association of Food Equipment Manufacturers (NAFEM) regarding the Energy Star Verification Testing Program  

Broader source: Energy.gov [DOE]

This document is a comment submitted by the North American Association of Food Equipment Manufacturers (NAFEM) regarding the Energy Star Verification Testing Program

47

North American Energy Work Group Releases Updated Trilateral...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

efficiency, regulatory cooperation, and hydrocarbons. The SPP strengthens North America's energy markets by working together, according to our respective legal frameworks, to...

48

Final Report on Kokes Awards for the 20th North American Catalysis Society Meeting  

SciTech Connect (OSTI)

This Final Report describes how the Kokes Awards program was carried out for the 2007 meeting with regard to selection of students and disbursement of funds received from DOE and other sources. The objective of the Richard J. Kokes Travel Award program of the American Catalysis Society is to encourage graduate students to attend and participate meaningfully in the biennial North American Catalysis Society Meeting.

Wong, Michael S.

2008-01-01T23:59:59.000Z

49

Multiscale Variability of the Flow during the North American Monsoon Experiment RICHARD H. JOHNSON, PAUL E. CIESIELSKI, BRIAN D. MCNOLDY, PETER J. ROGERS, AND  

E-Print Network [OSTI]

Multiscale Variability of the Flow during the North American Monsoon Experiment RICHARD H. JOHNSON H. Johnson, Dept

Johnson, Richard H.

50

Beta diversity and latitude in North American mammals: testing the hypothesis of covariation  

E-Print Network [OSTI]

Beta diversity and latitude in North American mammals: testing the hypothesis of covariation Pilar Rodri´guez and He´ctor T. Arita Rodri´guez, P. and Arita, H. T. 2004. Beta diversity and latitude of the pattern remain insufficiently explored, including the effect of scales and the role of beta diversity

Nacional Autónoma de México, Universidad

51

Proceedings of NAWTEC16 16th Annual North American Waste-to-Energy Conference  

E-Print Network [OSTI]

1 Proceedings of NAWTEC16 16th Annual North American Waste-to-Energy Conference May 19-21, 2008 of commercial tubing in Waste-to-Energy (WTE) boilers, a corrosion test was made by altering the HCl composition analysis of corrosion products by scanning electron microscope (SEM) and energy dispersive

Columbia University

52

North American Electricity Infrastructure: System Security, Quality, Reliability, Availability, and Efficiency  

E-Print Network [OSTI]

1 North American Electricity Infrastructure: System Security, Quality, Reliability, Availability for reliable and disturbance-free electricity. The massive power outages in the United States, Canada, UK and Italy in 2003 underscored electricity infrastructure's vulnerabilities [1-11]. This vital yet complex

Amin, S. Massoud

53

Company: American Pool Management Work Location: Edison, NJ Local Pools throughout Central and North Jersey  

E-Print Network [OSTI]

Company: American Pool Management Work Location: Edison, NJ ­ Local Pools throughout Central and North Jersey Pay Rate: $9-$12/hour Type of Business: Swimming Pool Management Job Title: Seasonal Staffing Assistant, Seasonal Area Supervisors, Seasonal Pool Managers, Seasonal Lifeguards Start Date: May

Hanson, Stephen José

54

Optimization and Visualization of the North American Eastern Interconnect Power Market  

E-Print Network [OSTI]

Optimization and Visualization of the North American Eastern Interconnect Power Market Douglas R uses a first generation OPF model of the Eastern Interconnect to gauge the potential benefits deriving, there is sufficient low cost capacity to keep peak demand prices in the Eastern Interconnect below $50 MWH. Under

55

Quaternary Science Reviews 25 (2006) 659688 A calibrated deglacial drainage chronology for the North American  

E-Print Network [OSTI]

for the North American continent: evidence of an Arctic trigger for the Younger Dryas Lev Tarasov, W.R. Peltier@atmosp.physics.utoronto.ca (L. Tarasov), peltier@atmosp.physics.utoronto.ca (W.R. Peltier). #12;(THC) (Keigwin et al., 1991

Peltier, W. Richard

2006-01-01T23:59:59.000Z

56

Continental energy security: Energy security in the North American context1  

E-Print Network [OSTI]

, commissioned reports, and signed legislation in an effort to stem crude oil imports and improve energy securityERG/201101 Continental energy security: Energy security in the North American context1 Larry Hughes, Canada 24 January 2011 1 A textbox for the Global Energy Assessment's Knowledge Module 5: Energy Security

Hughes, Larry

57

A summary of North American HVDC converter station reliability specifications  

SciTech Connect (OSTI)

This paper summarizes Reliability, Availability, and Maintainability (RAM) specifications that were issued for thyristor based HVDC converter stations in service in North America. A total of twenty project specifications are summarized. A detailed summary by project is shown with specific quantitative requirements categorized. Definitions of terms, representative design principles, and formulas used in calculating RAM parameters contained in existing reliability specifications are presented.

Vancers, I. (ABB Power Systems Inc., Los Angeles, CA (United States)); Hormozi, F.J. (Los Angeles Dept. of Water and Power, CA (United States))

1993-07-01T23:59:59.000Z

58

Triazine herbcides: Ecological risk assessment in North American surface waters  

SciTech Connect (OSTI)

The triazine herbicides are some of the most widely used pesticides in North America. Some are found in surface waters in North America and risks to aquatic ecosystems are a possible concern. This paper presents the results of a comprehensive aquatic ecological risk assessment conducted using probabilistic risk assessment techniques. The assessment of exposure data concentrated on Midwestern us watersheds, the area of greatest triazine use in North America and showed that concentrations of some triazines rarely exceeded 20 {mu}g/L in rivers, streams, and reservoirs. The effects assessment showed that phytoplankton were the most sensitive organisms to triazines followed, in decreasing order of sensitivity, by macrophytes, benthic invertebrates, zooplankton and fish. Distribution analysis of sensitivity to atrazine showed 10th percentile of 37 {mu}g/L for LC50s in all organisms and 5.4 {mu}g/L for LC50s in algae and plants. Simazine showed 10th percentiles of 188 {mu}g/L for LC50s in all organisms and 27 {mu}g/L for LC50s in aquatic plants. Comparisons of the exposure and effects distributions showed low probabilities of exceeding the 10th percentiles of the sensitivity distributions. These results will be discussed in relation to the mechanism of action of these substances and other stressors in the environment.

Solomon, K.R. [Univ. of Guelph (Canada)

1996-10-01T23:59:59.000Z

59

Honda: North American Manufacturing Facilities | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG | Department ofHTS Cable ProjectsHistory History On JanuaryNaturalHonda: North

60

North American Energy Work Group Releases Updated Trilateral Energy Report  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartment of Energy Advanced Framing -Nissan: ISOMeeting North|

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

North American Leaders Summit: Energy Deliverables | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartment of Energy Advanced Framing -Nissan: ISOMeeting North|Leaders

62

North American Green Power,LLC | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's HeatMexico:Community Nominations open for6.633492° LoadingNorth

63

Cross-equatorial influences of a South American cold surge on the development of two eastern North Pacific tropical cyclones  

E-Print Network [OSTI]

CROSS-EQUATORIAL INFLUENCES OF A SOUTH AMERICAN COLD SURGE ON THE DEVELOPMENT OF TWO EASTERN NORTH PACIFIC TROPICAL CYCLONES A Thesis by VICKI ANNE MILLIER Submitted to the Oflice of Graduate Studies of' Texas ASM University in partial fu...1611ment of the requirements for the degree of MASTER OF SCIENCE December 1989 Major Subject: Meteorology CROSS-EQUATORIAL INFLUENCES OF A SOUTH AMERICAN COLD SURGE ON THE DEVELOPMENT OF TWO EASTERN NORTH PACIFIC TROPICAL CYCLONES A Thesis...

Millier, Vicki Anne

1989-01-01T23:59:59.000Z

64

Heat flow patterns of the North American continent: A discussion of the DNAG Geothermal Map of North America  

SciTech Connect (OSTI)

The large and small-scale geothermal features of the North American continent and surrounding ocean areas illustrated on the new 1:5,000,000 DNAG Geothermal Map of North America are summarized. Sources for the data included on the map are given. The types of data included are heat flow sites coded by value, contours of heat flow with a color fill, areas of major groundwater effects on regional heat flow, the top-of-geopressure in the Gulf Coast region, temperature on the Dakota aquifer in the midcontinent, location of major hot springs and geothermal systems, and major center of Quaternary and Holocene volcanism. The large scale heat flow pattern that is well known for the conterminous United States and Canada of normal heat flow east of the Cordillera and generally high heat flow west of the front of the Cordillera dominates the continental portion of the map. However, details of the heat flow variations are also seen and are discussed briefly in this and the accompanying papers.

Blackwell, David D.; Steele, John L.; Carter, Larry C.

1990-01-01T23:59:59.000Z

65

Plate interaction in the NE Caribbean subduction zone from continuous GPS observations  

E-Print Network [OSTI]

Plate interaction in the NE Caribbean subduction zone from continuous GPS observations Uri S. ten sites on NE Caribbean islands to evaluate strain accumulation along the North American (NA) ­ Caribbean-Venegas (2012), Plate interaction in the NE Caribbean subduction zone from continuous GPS observations, Geophys

ten Brink, Uri S.

66

Lake and Reservoir Management, 25:364376, 2009 C Copyright by the North American Lake Management Society 2009  

E-Print Network [OSTI]

Lake and Reservoir Management, 25:364­376, 2009 C Copyright by the North American Lake Management Quality (EQ) of the reservoirs was assessed by integrating values of total chlorophyll a, cyanophyta classification of a set of Mediterranean reservoirs applying the EU Water Framework Directive: A reasonable

García-Berthou, Emili

67

High-resolution modeling of the western North American power system demonstrates low-cost and low-carbon futures  

E-Print Network [OSTI]

High-resolution modeling of the western North American power system demonstrates low-cost and low energy Carbon emissions a b s t r a c t Decarbonizing electricity production is central to reducing of resource cost scenarios, most coal power plants would be replaced by solar, wind, gas, and/or nuclear

Kammen, Daniel M.

68

An Avian Influenza Virus from Waterfowl in South America Contains Genes from North American Avian and Equine Lineages  

E-Print Network [OSTI]

An Avian Influenza Virus from Waterfowl in South America Contains Genes from North American Avian in 2002, there have been few reports of avian influenza in South America. However, surveillance in free to an equine influenza virus from South America. RESUMEN. Un virus de influenza aviar aislado de aves acua

McCracken, Kevin G.

69

North American Power Symposium NAPS, San Luis Obispo, California, October 1999. Web-based Computing for Power System Applications  

E-Print Network [OSTI]

North American Power Symposium NAPS, San Luis Obispo, California, October 1999. Web-based Computing|This paper discusses the possible appli- cations of web-based computing, which is based on In- ternet be achieved by using web-based computing, as this technology per- mits sharing of data and computing resources

Cañizares, Claudio A.

70

Respiratory survey of North American Indian children living in proximity to an aluminum smelter  

SciTech Connect (OSTI)

We explored the relationship of respiratory symptoms and lung function to exposure to ambient air pollution consisting of particulate and gaseous fluorides. The subjects were 253 North American Indian children 11 to 17 yr of age living on the Akwasasne reserve, which is adjacent to an aluminum smelter. Among boys, closing volume (CV/VC%) was increased in those raised closest to the smelter as opposed to those having lived most of their lives farthest from this source of air pollution. In both sexes, there was a significant linear relationship between increasing CV/VC% and the amount of fluoride contained in a spot urine sample. We conclude that exposure to fluoride air pollution in the community may be associated with abnormalities in small airways. The implication of these abnormalities for future respiratory health is unknown.

Ernst, P.; Thomas, D.; Becklake, M.R.

1986-02-01T23:59:59.000Z

71

Comments on Rainfall and Climate Variation over a Sloping New Mexico Plateau during the North American Monsoon  

E-Print Network [OSTI]

Nevada, and one near the IdahoWyoming border. These low pressure areas moved outward from these centers during the evening as the daytime circulation transitioned to a nighttime one. Reiter and Tang (1985) noted that the farther areas were from one...292 VOLUME 11J O U R N A L O F C L I M A T E q 1998 American Meteorological Society Comments on Rainfall and Climate Variation over a Sloping New Mexico Plateau during the North American Monsoon DONNA F. TUCKER Department of Physics...

Tucker, Donna F.

1998-02-01T23:59:59.000Z

72

THE NORTH AMERICAN AND PELICAN NEBULAE. II. MIPS OBSERVATIONS AND ANALYSIS  

SciTech Connect (OSTI)

We present observations of {approx}7 deg{sup 2} of the North American and Pelican Nebulae region at 24, 70, and 160 {mu}m with the Spitzer Space Telescope Multiband Imaging Photometer for Spitzer (MIPS). We incorporate the MIPS observations with earlier Spitzer Infrared Array Camera (IRAC) observations, as well as archival near-infrared (IR) and optical data. We use the MIPS data to identify 1286 young stellar object (YSO) candidates. IRAC data alone can identify 806 more YSO candidates, for a total of 2076 YSO candidates. Prior to the Spitzer observations, there were only {approx}200 YSOs known in this region. Three subregions within the complex are highlighted as clusters: the Gulf of Mexico, the Pelican, and the Pelican's Hat. The Gulf of Mexico cluster is subject to the highest extinction (A{sub V} at least {approx}30) and has the widest range of infrared colors of the three clusters, including the largest excesses and by far the most point-source detections at 70 {mu}m. Just 3% of the cluster members were previously identified; we have redefined this cluster as about 10-100 times larger (in projected area) than was previously realized.

Rebull, L. M.; Stauffer, J. R.; Noriega-Crespo, A.; Carey, S. J.; Padgett, D. L. [Spitzer Science Center/Caltech, M/S 220-6, 1200 East California Boulevard, Pasadena, CA 91125 (United States); Guieu, S. [European Southern Observatory, Alonso de Cordova 3107, Vitacura, Santiago (Chile); Hillenbrand, L. A.; Carpenter, J. M. [Department of Astronomy, California Institute of Technology, Pasadena, CA 91125 (United States); Stapelfeldt, K. R. [Jet Propulsion Laboratory, MS 183-900, California Institute of Technology, Pasadena, CA 91109 (United States); Cole, D. M. [Raytheon, Pasadena, CA (United States); Strom, S. E.; Wolff, S. C., E-mail: luisa.rebull@jpl.nasa.gov [NOAO, Tucson, AZ (United States)

2011-04-01T23:59:59.000Z

73

Council on East Asian Libraries Statistics 2006-2007 For North American Institutions  

E-Print Network [OSTI]

://www.arl.org/bm~doc/07ssurvey_final.pdf> Holdings of East Asian Materials of North American Institutions as of June 30, T o t a l Vol u m e s in Lib r a r y I n s t i t u t io n s JP N K OR N- CJ K TOTA LCHN JPN K OR N-CJ K TOTALCHN J PN KOR N-CJK TO TA LCHN JPN K OR N... 12865 210 0 1 7 5 5 0 16 , 720 B ri g h a m Youn g 5 0 042 15088 8 19 9 0 73 , 329 2089 3 33 453 0 2,875 0 0 0 0 0 208 9 3 3 3 453 0 2,875 52131 1 5421 8652 0 76,204 Britis h Columb i a 295242 148352 24913 761 6 3 544,07 0 4811 4797 455 0 1 0 , 0 6 3 0 0...

Doll, Vickie; Hsu, Calvin; Simpson, Fung-yin Kuo

2008-02-01T23:59:59.000Z

74

LIMITS ON THE STOCHASTIC GRAVITATIONAL WAVE BACKGROUND FROM THE NORTH AMERICAN NANOHERTZ OBSERVATORY FOR GRAVITATIONAL WAVES  

SciTech Connect (OSTI)

We present an analysis of high-precision pulsar timing data taken as part of the North American Nanohertz Observatory for Gravitational Waves (NANOGrav) project. We have observed 17 pulsars for a span of roughly five years using the Green Bank and Arecibo radio telescopes. We analyze these data using standard pulsar timing models, with the addition of time-variable dispersion measure and frequency-variable pulse shape terms. Sub-microsecond timing residuals are obtained in nearly all cases, and the best rms timing residuals in this set are {approx}30-50 ns. We present methods for analyzing post-fit timing residuals for the presence of a gravitational wave signal with a specified spectral shape. These optimally take into account the timing fluctuation power removed by the model fit, and can be applied to either data from a single pulsar, or to a set of pulsars to detect a correlated signal. We apply these methods to our data set to set an upper limit on the strength of the nHz-frequency stochastic supermassive black hole gravitational wave background of h{sub c} (1 yr{sup -1}) < 7 Multiplication-Sign 10{sup -15} (95%). This result is dominated by the timing of the two best pulsars in the set, PSRs J1713+0747 and J1909-3744.

Demorest, P. B.; Ransom, S. [National Radio Astronomy Observatory, 520 Edgemont Road, Charlottesville, VA 22903 (United States)] [National Radio Astronomy Observatory, 520 Edgemont Road, Charlottesville, VA 22903 (United States); Ferdman, R. D.; Kaspi, V. M. [Department of Physics, McGill University, 3600 rue Universite, Montreal, QC H3A 2T8 (Canada)] [Department of Physics, McGill University, 3600 rue Universite, Montreal, QC H3A 2T8 (Canada); Gonzalez, M. E.; Stairs, I. H. [Department of Physics and Astronomy, University of British Columbia, 6224 Agricultural Road, Vancouver, BC V6T 1Z1 (Canada)] [Department of Physics and Astronomy, University of British Columbia, 6224 Agricultural Road, Vancouver, BC V6T 1Z1 (Canada); Nice, D. [Department of Physics, Lafayette College, Easton, PA 18042 (United States)] [Department of Physics, Lafayette College, Easton, PA 18042 (United States); Arzoumanian, Z. [Center for Research and Exploration in Space Science and Technology and X-Ray Astrophysics Laboratory, NASA Goddard Space Flight Center, Code 662, Greenbelt, MD 20771 (United States)] [Center for Research and Exploration in Space Science and Technology and X-Ray Astrophysics Laboratory, NASA Goddard Space Flight Center, Code 662, Greenbelt, MD 20771 (United States); Brazier, A.; Cordes, J. M. [Department of Astronomy, Cornell University, Ithaca, NY 14853 (United States)] [Department of Astronomy, Cornell University, Ithaca, NY 14853 (United States); Burke-Spolaor, S.; Lazio, J. [Jet Propulsion Laboratory, California Institute of Technology, 4800 Oak Grove Drive, Pasadena, CA 91106 (United States)] [Jet Propulsion Laboratory, California Institute of Technology, 4800 Oak Grove Drive, Pasadena, CA 91106 (United States); Chamberlin, S. J.; Ellis, J.; Giampanis, S. [Center for Gravitation, Cosmology and Astrophysics, Department of Physics, University of Wisconsin-Milwaukee, P.O. Box 413, Milwaukee, WI 53201 (United States)] [Center for Gravitation, Cosmology and Astrophysics, Department of Physics, University of Wisconsin-Milwaukee, P.O. Box 413, Milwaukee, WI 53201 (United States); Finn, L. S. [Department of Astronomy and Astrophysics, Pennsylvania State University, University Park, PA 16802 (United States)] [Department of Astronomy and Astrophysics, Pennsylvania State University, University Park, PA 16802 (United States); Freire, P. [Max-Planck-Institut fur Radioastronomie, D-53121 Bonn (Germany)] [Max-Planck-Institut fur Radioastronomie, D-53121 Bonn (Germany); Jenet, F. [Center for Gravitational Wave Astronomy, University of Texas at Brownsville, Brownsville, TX 78520 (United States)] [Center for Gravitational Wave Astronomy, University of Texas at Brownsville, Brownsville, TX 78520 (United States); Lommen, A. N. [Department of Physics and Astronomy, Franklin and Marshall College, P.O. Box 3003, Lancaster, PA 17604 (United States)] [Department of Physics and Astronomy, Franklin and Marshall College, P.O. Box 3003, Lancaster, PA 17604 (United States); McLaughlin, M. [Department of Physics, West Virginia University, P.O. Box 6315, Morgantown, WV 26505 (United States)] [Department of Physics, West Virginia University, P.O. Box 6315, Morgantown, WV 26505 (United States); and others

2013-01-10T23:59:59.000Z

75

North American Journal of Fisheries Management 25:251255, 2005 [Article]Copyright by the American Fisheries Society 2005  

E-Print Network [OSTI]

walleye mortality (Hoff- man et al. 1996; Flammang 1998). Other factors (e.g., wind and wave conditions]Copyright by the American Fisheries Society 2005 DOI: 10.1577/M04-106.1 Delayed Mortality of Tournament-Caught Walleyes.--We quantified the delayed mortality of walleyes Sander vitreus during three tourna- ments (April­June 2003

76

E-Print Network 3.0 - annual north american Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- Department of Medicinal Chemistry, University of Kansas Collection: Chemistry 3 CURRICULUM VITAE Christopher K. Beachy Summary: North Dakota INBRE Annual Symposium for...

77

Bootstrapping a Sustainable North American PEM Fuel Cell Industry: Could a Federal Acquisition Program Make a Difference?  

SciTech Connect (OSTI)

The North American Proton Exchange Membrane (PEM) fuel cell industry may be at a critical juncture. A large-scale market for automotive fuel cells appears to be several years away and in any case will require a long-term, coordinated commitment by government and industry to insure the co-evolution of hydrogen infrastructure and fuel cell vehicles (Greene et al., 2008). The market for non-automotive PEM fuel cells, on the other hand, may be much closer to commercial viability (Stone, 2006). Cost targets are less demanding and manufacturers appear to be close, perhaps within a factor of two, of meeting them. Hydrogen supply is a significant obstacle to market acceptance but may not be as great a barrier as it is for hydrogen-powered vehicles due to the smaller quantities of hydrogen required. PEM fuel cells appear to be potentially competitive in two markets: (1) Backup power (BuP) supply, and (2) electrically-powered MHE (Mahadevan et al., 2007a, 2007b). There are several Original Equipment Manufacturers (OEMs) of PEM fuel cell systems for these applications but production levels have been quite low (on the order of 100-200 per year) and cumulative production experience is also limited (on the order of 1,000 units to date). As a consequence, costs remain above target levels and PEM fuel cell OEMs are not yet competitive in these markets. If cost targets can be reached and acceptable solutions to hydrogen supply found, a sustainable North American PEM fuel cell industry could be established. If not, the industry and its North American supply chain could disappear within a year or two. The Hydrogen Fuel Cell and Infrastructure Technologies (HFCIT) program of the U.S. Department of Energy (DOE) requested a rapid assessment of the potential for a government acquisition program to bootstrap the market for non-automotive PEM fuel cells by driving down costs via economies of scale and learning-by-doing. The six week study included in-depth interviews of three manufacturers, visits to two production facilities, review of the literature on potential markets in North America and potential federal government procurements, development of a cost model reflecting economies of scale and learning-by-doing, and estimation of the impact of federal PEM fuel cell procurements on fuel cell system costs and the evolution of private market demand. This report presents the findings of that study. Section 2 outlines the status of the industry and describes potential markets based on interviews of manufacturers and the existing literature. Section 3 describes the modeling methodology including key premises and assumptions, and presents estimates of market evolution under four scenarios: (1) Base Case with no federal government procurement program, (2) Scenario 1, an aggressive program beginning with less than 200 units procured in 2008 ramping up to more than 2,000 units in 2012, (3) Scenario 2 which is identical to Scenario 1 except that the private market is assumed to be twice as sensitive to price, and (4) Scenario 3, a delayed, smaller federal procurement program beginning in 2011 increasing to a maximum of just over 1,000 units per year in 2012. The analysis suggests that the aggressive program of Scenario 1 would likely stimulate a sustainable, competitive North American non-automotive PEM fuel cell industry. Given plausible assumptions about learning rates and scale economies, the procurements assumed in Scenario 1 appear to be sufficient to drive down costs to target levels. These findings are conditional on the evolution of acceptable hydrogen supply strategies, which were not explicitly analyzed in this study. Success is less certain under Scenarios 2 and 3, and there appears to be a strong probability that existing OEMs would not survive until 2011. In the Base Case, no program, a viable North American industry does not emerge before 2020.

Greene, David L [ORNL; Duleep, Dr. K. G. [Energy and Environmental Analysis, Inc., an ICF Company

2008-10-01T23:59:59.000Z

78

North American Central Plains conductivity anomaly within the Trans-Hudson orogen in northern Saskatchewan, Canada  

E-Print Network [OSTI]

Saskatchewan, Canada Alan G. Jones } James A. Craven Geological Survey of Canada, 1 Observatory Crescent Magnetotelluric data acquired across the Paleoproterozoic Trans-Hudson orogen, north- ern Saskatchewan, image one

Jones, Alan G.

79

A model-data intercomparison of CO2 exchange across North America: Results from the North American Carbon Program Site Synthesis  

SciTech Connect (OSTI)

Our current understanding of terrestrial carbon processes is represented in various models used to integrate and scale measurements of CO{sub 2} exchange from remote sensing and other spatiotemporal data. Yet assessments are rarely conducted to determine how well models simulate carbon processes across vegetation types and environmental conditions. Using standardized data from the North American Carbon Program we compare observed and simulated monthly CO{sub 2} exchange from 44 eddy covariance flux towers in North America and 22 terrestrial biosphere models. The analysis period spans {approx}220 site-years, 10 biomes, and includes two large-scale drought events, providing a natural experiment to evaluate model skill as a function of drought and seasonality. We evaluate models' ability to simulate the seasonal cycle of CO{sub 2} exchange using multiple model skill metrics and analyze links between model characteristics, site history, and model skill. Overall model performance was poor; the difference between observations and simulations was {approx}10 times observational uncertainty, with forested ecosystems better predicted than nonforested. Model-data agreement was highest in summer and in temperate evergreen forests. In contrast, model performance declined in spring and fall, especially in ecosystems with large deciduous components, and in dry periods during the growing season. Models used across multiple biomes and sites, the mean model ensemble, and a model using assimilated parameter values showed high consistency with observations. Models with the highest skill across all biomes all used prescribed canopy phenology, calculated NEE as the difference between GPP and ecosystem respiration, and did not use a daily time step.

Schwalm, C.R.; Williams, C.A.; Schaefer, K.; Anderson, R.; Arain, M.A.; Baker, I.; Black, T.A.; Chen, G.; Ciais, P.; Davis, K. J.; Desai, A. R.; Dietze, M.; Dragoni, D.; Fischer, M.L.; Flanagan, L.B.; Grant, R.F.; Gu, L.; Hollinger, D.; Izaurralde, R.C.; Kucharik, C.; Lafleur, P.M.; Law, B.E.; Li, L.; Li, Z.; Liu, S.; Lokupitiya, E.; Luo, Y.; Ma, S.; Margolis, H.; Matamala, R.; McCaughey, H.; Monson, R. K.; Oechel, W. C.; Peng, C.; Poulter, B.; Price, D.T.; Riciutto, D.M.; Riley, W.J.; Sahoo, A.K.; Sprintsin, M.; Sun, J.; Tian, H.; Tonitto, C.; Verbeeck, H.; Verma, S.B.

2011-06-01T23:59:59.000Z

80

Establishing Public Policy as a Primary Cause of Engineering Failure: Did Market Deregulation Lead to the North American `Blackout', August 14th 2003?  

E-Print Network [OSTI]

to their power supplies. Losses have been estimated between $5-10 billion. It is, therefore, one of the most wide governmental and regulatory intervention, which led to problems in the operation of the energy market deregulation; electricity distribution. 1. Introduction The North American electricity network brings together

Williamson, John

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Proceedings of the 17th Annual North American Waste-to-Energy Conference May 18-20, 2009, Chantilly, Virginia, USA  

E-Print Network [OSTI]

WASTE (MSW) GASIFICATION UNDER VARIOUS PRESSURES AND CO2 CONCENTRATION ATMOSPHERES Eilhann Kwon, Kelly J, New York, NY 10027 ABSTRACT The Municipal Solid Waste (MSW) gasification process is a promisingProceedings of the 17th Annual North American Waste-to-Energy Conference NAWTEC17 May 18-20, 2009

Columbia University

82

North American Overview - Heat Pumps Role in Buildings Energy Efficiency Improvement  

SciTech Connect (OSTI)

A brief overview of the situation in North America regarding buildings energy use and the current and projected heat pump market is presented. R&D and deployment strategies for heat pumps, and the impacts of the housing market and efficiency regulations on the heating and cooling equipment market are summarized as well.

Baxter, Van D [ORNL; Bouza, Antonio [U.S. Department of Energy; Gigure, Daniel [Natural Resources Canada; Hosatte, Sophie [Natural Resources Canada

2011-01-01T23:59:59.000Z

83

Cenozoic oblique collision of South American and Caribbean plates: New evidence in the Coastal Cordillera of Venezuela and Trinidad  

SciTech Connect (OSTI)

The hinterland of the Caribbean Mts. orogen in Trinidad and Venezuela contains schist and gneiss whole protoliths are wholly or partly of continental provenance. The hinterland lies between the foreland thrust belt and terranes. The terranes are alien to continental South America (SA) and may have proto-Caribbean or Caribbean plate origins. The hinterland rocks were widely thought to come from sediments and granitoids of Mesozoic protolithic ages and to be of Cretaceous metamorphic age. Such rocks are now know to be of at least two or more types, as follows: (1) low grade, protoliths of pre-Mesozoic basement and shelfal cover of uncertain age range, inboard locus, Oligocene to mid-Miocene metamorphic ages younging eastward (Caracas, Paria, and Northern Range belts), and (2) higher grade including high P/T, varies protoliths of uncertain age range, Cretaceous and ( )early Paleogene metamorphic ages (Tacagua, Araya, Margarita). The geometry, protoliths, structures, and metamorphic ages of type 1 parautochthoneity and an origin as a thickened wedge of crust-cored passive margin cover. The wedge grew by accretion between about 35 and 20 Ma during oblique transport toward the foreland. The diachroneity of metamorphism implies, as does the timing of foreland deformation, that the wedge evolved in a right-oblique collision between northern SA and terranes moving wholly or partly with the Caribbean plate since the Eocene. Type 2 rocks probably came with the terranes and are products of convergent zone tectonics, either in the proto-Caribbean plate. The hinterland boundaries are brittle thrusts that are out of sequence and imply progressive contraction from mid-Cenozoic to the present.

Speed, R.C. (Northwestern Univ., Evanston, IL (United States)); Russo, R.M. (Carnegie Institute of Washington (United States)); Foland, K.A. (Ohio State Univ., Columbus (United States))

1993-02-01T23:59:59.000Z

84

North American Energy Ministers Take Further Action on Energy Security and  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartment of Energy Advanced Framing -Nissan: ISOMeeting North

85

Climate Change Projections of the North American Regional Climate Change Assessment Program (NARCCAP)  

SciTech Connect (OSTI)

We investigate major results of the NARCCAP multiple regional climate model (RCM) experiments driven by multiple global climate models (GCMs) regarding climate change for seasonal temperature and precipitation over North America. We focus on two major questions: How do the RCM simulated climate changes differ from those of the parent GCMs and thus affect our perception of climate change over North America, and how important are the relative contributions of RCMs and GCMs to the uncertainty (variance explained) for different seasons and variables? The RCMs tend to produce stronger climate changes for precipitation: larger increases in the northern part of the domain in winter and greater decreases across a swath of the central part in summer, compared to the four GCMs driving the regional models as well as to the full set of CMIP3 GCM results. We pose some possible process-level mechanisms for the difference in intensity of change, particularly for summer. Detailed process-level studies will be necessary to establish mechanisms and credibility of these results. The GCMs explain more variance for winter temperature and the RCMs for summer temperature. The same is true for precipitation patterns. Thus, we recommend that future RCM-GCM experiments over this region include a balanced number of GCMs and RCMs.

Mearns, L. O.; Sain, Steve; Leung, Lai-Yung R.; Bukovsky, M. S.; McGinnis, Seth; Biner, S.; Caya, Daniel; Arritt, R.; Gutowski, William; Takle, Eugene S.; Snyder, Mark A.; Jones, Richard; Nunes, A M B.; Tucker, S.; Herzmann, D.; McDaniel, Larry; Sloan, Lisa

2013-10-01T23:59:59.000Z

86

Recovery of uranium by using new microorganisms isolated from North American uranium deposits  

SciTech Connect (OSTI)

Some attempts were made to remove uranium that may be present in refining effluents, mine tailings by using new microorganisms isolated from uranium deposits and peculiar natural environments. To screen microorganisms isolated from uranium deposits and peculiar natural environments in North America and Japan for maximal accumulation of uranium, hundreds of microorganisms were examined. Some microorganisms can accumulate about 500 mg (4.2 mEq) of uranium per gram of Microbial cells within 1 h. The uranium accumulation capacity of the cells exceeds that of commercially available chelating agents (2-3 mEq/g adsorbent). We attempted to recover uranium from uranium refining waste water by using new microorganisms. As a result, these microbial cells can recover trace amounts of uranium from uranium waste water with high efficiency. These strains also have a high accumulating ability for thorium. Thus, these new microorganisms can be used as an adsorbing agent for the removal of nuclear elements may be present in metallurgical effluents, mine tailings and other waste sources.

Sakaguchi, T.; Nakajima, A.; Tsuruta, T. [Miyazaki Medical College (Japan)

1995-12-31T23:59:59.000Z

87

Biology and management of insect pests in North American intensively managed hardwood forest systems.  

SciTech Connect (OSTI)

Annu. Rev. Entomol. 50:1-29. Abstract Increasing demand for wood and wood products is putting stress on traditional forest production areas, leading to long-term economic and environmental concerns. Intensively managed hardwood forest systems (IMHFS), grown using conventional agricultural as well as forestry methods, can help alleviate potential problems in natural forest production areas. Although IMHFS can produce more biomass per hectare per year than natural forests, the ecologically simplified, monocultural systems may greatly increase the crops susceptibility to pests. Species in the genera Populus and Salix comprise the greatest acreage in IMHFS in North America, but other species, including Liquidambar styracifua and Platanus occidentalis, are also important. We discuss life histories, realized and potential damage, and management options for the most economically infuential pests that affect these hardwood species. The substantial inherent challenges associated with pest management in the monocultural environments created by IMHFS are reviewed. Finally, we discuss ways to design IMHFS that may reduce their susceptibility to pests, increase their growth and productivity potential, and create a more sustainable environment.

Coyle, David R.; Nebeker, T., E.; Hart, E., R.; Mattson, W., J.

2005-01-01T23:59:59.000Z

88

Air-Quality Data from NARSTO (North American Research Strategy for Tropospheric Ozone)  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

NARSTO is a public/private partnership dedicated to improving management of air quality in North America. It was established on February 13, 1995 when representatives of Canada, the United States, and Mexico signed the NARSTO Charter in a ceremony at the White House. The Department of Energy is one of the charter members providing funding. The central programmatic goal of NARSTO is to provide data and information for use in the determination of workable, efficient, and effective strategies for local and regional ozone and fine particle management. Since its founding, NARSTO has completed three major scientific Assessments of critical air quality management issues. NARSTO maintains the Quality Systems Science Center and the NARSTO Data Archive for storing data from NARSTO Affiliated Research Activities and making these data available to the scientific community. NARSTO also facilitates activities, such as the Reactivity Research Working Group, which provide critical reviews of the state of the science in areas of interest to air quality policy makers. In January 1997, the U.S. Department of Energy's Environmental Sciences Division announced their sponsorship of the NARSTO Quality Systems Science Center (QSSC). The QSSC is located at the Oak Ridge National Laboratory within the Carbon Dioxide Information Analysis Center (CDIAC). Quality Assurance and Data Management assistance and guidelines are provided by the QSCC, along with access to data files. The permanent data archive is maintained by the NASA EOSDIS Distributed Active Archive Center at the Langley Research Center. The archived data can be reached by a link from the QSSC.(Specialized Interface) See also the NARSTO web site at http://www.narsto.org/

89

Validation of Noah-simulated Soil Temperature in the North American Land Data Assimilation System Phase 2  

SciTech Connect (OSTI)

Soil temperature can exhibit considerable memory from weather and climate signals and is among the most important initial conditions in numerical weather and climate models. Consequently, a more accurate long-term land surface soil temperature dataset is needed to improve weather and climate simulation and prediction, and is also important for the simulation of agricultural crop yield and ecological processes. The North-American Land Data Assimilation (NLDAS) Phase 2 (NLDAS-2) has generated 31-years (1979-2009) of simulated hourly soil temperature data with a spatial resolution of 1/8o. This dataset has not been comprehensively evaluated to date. Thus, the ultimate purpose of the present work is to assess Noah-simulated soil temperature for different soil depths and timescales. We used long-term (1979-2001) observed monthly mean soil temperatures from 137 cooperative stations over the United States to evaluate simulated soil temperature for three soil layers (0-10 cm, 10-40 cm, 40-100 cm) for annual and monthly timescales. We used short-term (1997-1999) observed soil temperature from 72 Oklahoma Mesonet stations to validate simulated soil temperatures for three soil layers and for daily and hourly timescales. The results showed that the Noah land surface model (Noah LSM) generally matches observed soil temperature well for different soil layers and timescales. At greater depths, the simulation skill (anomaly correlation) decreased for all time scales. The monthly mean diurnal cycle difference between simulated and observed soil temperature revealed large midnight biases in the cold season due to small downward longwave radiation and issues related to model parameters.

Xia, Youlong; Ek, Michael; Sheffield, Justin; Livneh, Ben; Huang, Maoyi; Wei, Helin; Song, Feng; Luo, Lifeng; Meng, Jesse; Wood, Eric

2013-02-25T23:59:59.000Z

90

The North American Carbon Program Multi-scale synthesis and Terrestrial Model Intercomparison Project Part 1: Overview and experimental design  

SciTech Connect (OSTI)

Terrestrial biosphere models (TBMs) have become an integral tool for extrapolating local observations and understanding of land-atmosphere carbon exchange to larger regions. The North American Carbon Program (NACP) Multi-scale synthesis and Terrestrial Model Intercomparison Project (MsTMIP) is a formal model intercomparison and evaluation effort focused on improving the diagnosis and attribution of carbon exchange at regional and global scales. MsTMIP builds upon current and past synthesis activities, and has a unique framework designed to isolate, interpret, and inform understanding of how model structural differences impact estimates of carbon uptake and release. Here we provide an overview of the MsTMIP effort and describe how the MsTMIP experimental design enables the assessment and quantification of TBM structural uncertainty. Model structure refers to the types of processes considered (e.g. nutrient cycling, disturbance, lateral transport of carbon), and how these processes are represented (e.g. photosynthetic formulation, temperature sensitivity, respiration) in the models. By prescribing a common experimental protocol with standard spin-up procedures and driver data sets, we isolate any biases and variability in TBM estimates of regional and global carbon budgets resulting from differences in the models themselves (i.e. model structure) and model-specific parameter values. An initial intercomparison of model structural differences is represented using hierarchical cluster diagrams (a.k.a. dendrograms), which highlight similarities and differences in how models account for carbon cycle, vegetation, energy, and nitrogen cycle dynamics. We show that, despite the standardized protocol used to derive initial conditions, models show a high degree of variation for GPP, total living biomass, and total soil carbon, underscoring the influence of differences in model structure and parameterization on model estimates.

Huntzinger, D.N. [Northern Arizona University] [Northern Arizona University; Schwalm, C. [Northern Arizona University] [Northern Arizona University; Michalak, A.M [Carnegie Institution for Science, Stanford] [Carnegie Institution for Science, Stanford; Schaefer, K. [National Snow and Ice Data Center] [National Snow and Ice Data Center; King, A.W. [Oak Ridge National Laboratory (ORNL)] [Oak Ridge National Laboratory (ORNL); Wei, Y. [Oak Ridge National Laboratory (ORNL)] [Oak Ridge National Laboratory (ORNL); Jacobson, A. [National Snow and Ice Data Center] [National Snow and Ice Data Center; Liu, S. [Oak Ridge National Laboratory (ORNL)] [Oak Ridge National Laboratory (ORNL); Cook, R. [Oak Ridge National Laboratory (ORNL)] [Oak Ridge National Laboratory (ORNL); Post, W.M. [Oak Ridge National Laboratory (ORNL)] [Oak Ridge National Laboratory (ORNL); Berthier, G. [Laboratoire des Sciences du Climat et de l'Environnement (LSCE)] [Laboratoire des Sciences du Climat et de l'Environnement (LSCE); Hayes, D. [Oak Ridge National Laboratory (ORNL)] [Oak Ridge National Laboratory (ORNL); Huang, M. [Pacific Northwest National Laboratory (PNNL)] [Pacific Northwest National Laboratory (PNNL); Ito, A. [National Institute for Environmental Studies, Tsukuba, Japan] [National Institute for Environmental Studies, Tsukuba, Japan; Lei, H. [Pacific Northwest National Laboratory (PNNL)] [Pacific Northwest National Laboratory (PNNL); Lu, C. [International Center for Climate and Global Change Research and School of Forestry and Wildlife Sci.] [International Center for Climate and Global Change Research and School of Forestry and Wildlife Sci.; Mao, J. [Oak Ridge National Laboratory (ORNL)] [Oak Ridge National Laboratory (ORNL); Peng, C.H. [University of Quebec at Montreal, Institute of Environment Sciences] [University of Quebec at Montreal, Institute of Environment Sciences; Peng, S. [Laboratoire des Sciences du Climat et de l'Environnement (LSCE)] [Laboratoire des Sciences du Climat et de l'Environnement (LSCE); Poulter, B. [Laboratoire des Sciences du Climat et de l'Environnement (LSCE)] [Laboratoire des Sciences du Climat et de l'Environnement (LSCE); Riccuito, D. [Oak Ridge National Laboratory (ORNL)] [Oak Ridge National Laboratory (ORNL); Shi, X. [Oak Ridge National Laboratory (ORNL)] [Oak Ridge National Laboratory (ORNL); Tian, H. [International Center for Climate and Global Change Research and School of Forestry and Wildlife Sci.] [International Center for Climate and Global Change Research and School of Forestry and Wildlife Sci.; Wang, W. [National Aeronautics and Space Administration (NASA), Ames Research Center, Moffett Field] [National Aeronautics and Space Administration (NASA), Ames Research Center, Moffett Field; Zeng, N. [University of Maryland] [University of Maryland; Zhao, F. [University of Maryland] [University of Maryland; Zhu, Q. [Laboratory for Ecological Forecasting and Northwest Agriculture and Forestry University] [Laboratory for Ecological Forecasting and Northwest Agriculture and Forestry University

2013-01-01T23:59:59.000Z

91

North American PHEV Demonstration  

Broader source: Energy.gov (indexed) [DOE]

7 Overall AC electrical energy consumption (AC Whmi) 112 Overall DC electrical energy consumption (DC Whmi) 72 Total number of trips 973 Total distance traveled (mi) 12,099...

92

North American PHEV Demonstration  

Broader source: Energy.gov (indexed) [DOE]

12 Overall DC electrical energy consumption (DC Whmi) 75 Total number of trips 1,394 Total distance traveled (mi) 18,639 Trips in Charge Depleting (CD) mode Gasoline fuel...

93

North American PHEV Demonstration  

Broader source: Energy.gov (indexed) [DOE]

period: September 2010 Number of vehicle days driven: 324 All Trips Combined Overall gasoline fuel economy (mpg) 38 Overall AC electrical energy consumption (AC Whmi) 88...

94

North American PHEV Demonstration  

Broader source: Energy.gov (indexed) [DOE]

period: August 2010 Number of vehicle days driven: 349 All Trips Combined Overall gasoline fuel economy (mpg) 42 Overall AC electrical energy consumption (AC Whmi) 123...

95

North American PHEV Demonstration  

Broader source: Energy.gov (indexed) [DOE]

period: June 2010 Number of vehicle days driven: 361 All Trips Combined Overall gasoline fuel economy (mpg) 37 Overall AC electrical energy consumption (AC Whmi) 90...

96

North American PHEV Demonstration  

Broader source: Energy.gov (indexed) [DOE]

period: May 2010 Number of vehicle days driven: 371 All Trips Combined Overall gasoline fuel economy (mpg) 40 Overall AC electrical energy consumption (AC Whmi) 93...

97

North American PHEV Demonstration  

Broader source: Energy.gov (indexed) [DOE]

period: January 2010 Number of vehicle days driven: 247 All Trips Combined Overall gasoline fuel economy (mpg) 36 Overall AC electrical energy consumption (AC Whmi) 103...

98

North American PHEV Demonstration  

Broader source: Energy.gov (indexed) [DOE]

period: July 2010 Number of vehicle days driven: 294 All Trips Combined Overall gasoline fuel economy (mpg) 36 Overall AC electrical energy consumption (AC Whmi) 98...

99

North American PHEV Demonstration  

Broader source: Energy.gov (indexed) [DOE]

period: March 2010 Number of vehicle days driven: 336 All Trips Combined Overall gasoline fuel economy (mpg) 40 Overall AC electrical energy consumption (AC Whmi) 136...

100

Circulation of North American epicontinental seas during the Carboniferous using stable isotope and trace element analyses of brachiopod shells  

E-Print Network [OSTI]

of North America. These units include the Grove Church and Mattoon Formations (Illinois Basin), Glenshaw Formation (Appalachian Basin), Bird Spring Formation (Bird Spring Basin), and Oread Formation (US midcontinent). In all, 98 brachiopod shells were found...

Flake, Ryan Christopher

2012-07-16T23:59:59.000Z

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

NAPS 2003, 35th North American Power Symposium, University of Missouri-Rolla in Rolla, Missouri, October 20-21, 2003. pp. 559-566. Abstract--Security of supply has been always a key factor  

E-Print Network [OSTI]

as a terrorist attack to some key power plants or transmission lines. Since September 11, 2001 the threat three kinds of threats over society: a) Attacks upon the power system. Here the target is the electricNAPS 2003, 35th North American Power Symposium, University of Missouri-Rolla in Rolla, Missouri

Catholic University of Chile (Universidad Catlica de Chile)

102

Characterization of selected Ohio coals to predict their conversion behavior relative to 104 North American Coals. [Factors correlating with liquefaction behavior  

SciTech Connect (OSTI)

Twenty-six coal samples from Ohio were collected as washed and seam samples, and lithobodies within the seams. Characterization of these samples included determination of % maceral, % anti R/sub max/, LTA, chlorine content and proximate/ultimate and qualitative mineral analyses. These data were compared to data from a similar project by Yarzab, R.F., et al., 1980 completed at Pennsylvania State University using tetralin as the hydrogen donor solvent. The characteristics of these coals were correlated with liquefaction conversion and other data accrued on 104 North American coals by statistical analyses. Utilizing percent carbon, sulfur, volatile matter, reflectance, vitrinite and total reactive macerals, Q-mode cluster analysis demonstrated that Ohio coals are more similar to the coals of the Interior province than to those of the Appalachian province. Linear multiple regression analysis for the 104 North American coals provided a prediction equation for conversion (R = .96). The predicted conversion values for the samples range from 58.8 to 79.6%, with the Lower Kittanning (No. 5) and the Middle Kittanning (No. 6) coal seams showing the highest predicted percent conversion (respectively, 73.4 and 72.2%). The moderately low FSI values for the No. 5 and No. 6 coals (respectively, 2.5 and 3) and their moderately high alkaline earth content (respectively, 0.69 and 0.74%) suggest that these coals possess the best overall properties for conversion. Stepwise regression has indicated that the most important coal characteristics affecting conversion are, in decreasing order of importance: % volatile matter, % vitrinite and % total sulfur. Conversion processes can be expected to produce higher yields with Ohio coals due to the presence of such mineral catalysts as pyrite and kaolinite. It is believed that the presence of these disposable catalysts increases the marketability of Ohio coals.

Whitacre, T. P.; Hunt, T. J.; Kneller, W. A.

1982-02-01T23:59:59.000Z

103

E-Print Network 3.0 - american beaver castor Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 Do introduced North American beavers Castor canadensis engineer differently in southern South America? An overview Summary: Do introduced North American beavers Castor canadensis...

104

Electroless copper plating  

DOE Patents [OSTI]

An optimized electroless copper plating technique suitable for plating electroless copper upon ceramics.

McHenry, Michael R. (Lee's Summit, MO)

1998-12-15T23:59:59.000Z

105

The noble gas and carbon systematics of divergent, convergent and strike-slip plate boundaries : examples from the Reykjanes Ridge, Central American Arc and North Anatolian Fault Zone  

E-Print Network [OSTI]

cold springs, mud-pots, geothermal wells, rocks, scoria, andsprings, mud-pots and geothermal wells in El Salvador andsprings, mud-pots and geothermal wells in El Salvador and

Leeuw, Goverdina Anna Maria de

2007-01-01T23:59:59.000Z

106

E-Print Network 3.0 - adult native americans Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Edward D. Castillo California Indian Culture and History, American Indian Religion & Philosophy, Native... American Education and North American History Gregory ... Source:...

107

FINAL TECHNICAL REPORT AMERICAN RECOVERY AND REINVESTMENT ACT NORTH FORK SKOKOMISH POWERHOUSE AT CUSHMAN NO. 2 DAM  

SciTech Connect (OSTI)

The objective of this project was to add generating capacity on an in-stream flow release at Tacoma Power's Cushman hydroelectric project, Cushman No. 2 Dam, FERC Project P-460. The flow that is being used to generate additional electricity was being discharged from a valve at the base of the dam without recovery of the energy. A second objective to the project was to incorporate upstream fish passage by use of a fish collection structure attached to the draft tubes of the hydroelectric units. This will enable reintroduction of native anadromous fish above the dams which have blocked fish passage since the late 1920's. The project was funded in part by the American Recovery and Reinvestment Act through the Department of Energy, Office of Energy, Efficiency and Renewable Energy, Wind and Water Power Program.

Fischer, Steve; Wilson, Matthew

2013-09-30T23:59:59.000Z

108

HISTORICAL AMERICAN ENGINEERING RECORD - IDAHO NATIONAL ENGINEERING AND ENVIRONMENTAL LABORATORY, TEST AREA NORTH, HAER NO. ID-33-E  

SciTech Connect (OSTI)

Test Area North (TAN) was a site of the Aircraft Nuclear Propulsion (ANP) Project of the U.S. Air Force and the Atomic Energy Commission. Its Cold War mission was to develop a turbojet bomber propelled by nuclear power. The project was part of an arms race. Test activities took place in five areas at TAN. The Assembly & Maintenance area was a shop and hot cell complex. Nuclear tests ran at the Initial Engine Test area. Low-power test reactors operated at a third cluster. The fourth area was for Administration. A Flight Engine Test facility (hangar) was built to house the anticipated nuclear-powered aircraft. Experiments between 1955-1961 proved that a nuclear reactor could power a jet engine, but President John F. Kennedy canceled the project in March 1961. ANP facilities were adapted for new reactor projects, the most important of which were Loss of Fluid Tests (LOFT), part of an international safety program for commercial power reactors. Other projects included NASA's Systems for Nuclear Auxiliary Power and storage of Three Mile Island meltdown debris. National missions for TAN in reactor research and safety research have expired; demolition of historic TAN buildings is underway.

Susan Stacy; Hollie K. Gilbert

2005-02-01T23:59:59.000Z

109

Electroless copper plating  

DOE Patents [OSTI]

An optimized electroless copper plating technique is described suitable for plating electroless copper upon ceramics. 12 figs.

McHenry, M.R.

1998-12-15T23:59:59.000Z

110

New Constraints on Carribean Plate Tectonic Evolution Caribbean Basins included in the series Sedimentary Basins of the World, 4 Elsevier  

E-Print Network [OSTI]

North America-Africa and South America-Africa finite rotations North America-South America finite rotations North America-South America plate motions in the Caribbean are Discussion Lesser Antilles to Mid satellite altimetry to compute North America-South America plate motions and their uncertainties. Our

Müller, Dietmar

111

Sensitivity of North American agriculture to ENSO-based climate scenarios and their socio-economic consequences: Modeling in an integrated assessment framework  

SciTech Connect (OSTI)

A group of Canadian, US and Mexican natural resource specialists, organized by the Pacific Northwest National Laboratory (PNNL) under its North American Energy, Environment and Economy (NA3E) Program, has applied a simulation modeling approach to estimating the impact of ENSO-driven climatic variations on the productivity of major crops grown in the three countries. Methodological development is described and results of the simulations presented in this report. EPIC (the Erosion Productivity Impact Calculator) was the agro-ecosystem model selected-for this study. EPIC uses a daily time step to simulate crop growth and yield, water use, runoff and soil erosion among other variables. The model was applied to a set of so-called representative farms parameterized through a specially-assembled Geographic Information System (GIS) to reflect the soils, topography, crop management and weather typical of the regions represented. Fifty one representative farms were developed for Canada, 66 for the US and 23 for Mexico. El Nino-Southern Oscillation (ENSO) scenarios for the EPIC simulations were created using the historic record of sea-surface temperature (SST) prevailing in the eastern tropical Pacific for the period October 1--September 30. Each year between 1960 and 1989 was thus assigned to an ENSO category or state. The ENSO states were defined as El Nino (EN, SST warmer than the long-term mean), Strong El Nino (SEN, much warmer), El Viejo (EV, cooler) and Neutral (within {+-}0.5 C of the long-term mean). Monthly means of temperature and precipitation were then calculated at each farm for the period 1960--1989 and the differences (or anomalies) between the means in Neutral years and EN, SEN and EV years determined. The average monthly anomalies for each ENSO state were then used to create new monthly statistics for each farm and ENSO-state combination. The adjusted monthly statistics characteristic of each ENSO state were then used to drive a stochastic-weather simulator that provided 30 years of daily-weather data needed to run EPIC. Maps and tables of the climate anomalies by farm show climatic conditions that differ considerably by region, season and ENSO state.

Rosenberg, N.J.; Izaurralde, R.C.; Brown, R.A.; Sands, R.D. [Pacific Northwest National Lab., Richland, WA (United States); Legler, D. [Florida State Univ., Tallahassee, FL (United States). Center for Ocean Atmosphere Prediction Studies; Srinivasan, R. [Texas A and M Univ., College Station, TX (United States). Blacklands Research Center; Tiscareno-Lopez, M.

1997-09-01T23:59:59.000Z

112

North Richmond: An American Story  

E-Print Network [OSTI]

the west, the largest oil refinery on the west coast spewsresidents, but noted that Refineries are heavily regulated,mean that Chevrons refinery emits far lower emissions than

rogers, robert h

2011-01-01T23:59:59.000Z

113

Polish - American Heritage, Italian - American Heritage, German...  

Broader source: Energy.gov (indexed) [DOE]

Polish - American Heritage, Italian - American Heritage, German - American Heritage Months Polish - American Heritage, Italian - American Heritage, German - American Heritage...

114

E-Print Network 3.0 - american sturgeon pioneers Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sample search results for: american sturgeon pioneers Page: << < 1 2 3 4 5 > >> 1 Green Sturgeon General Questions & Answers North American green sturgeon Summary: Green...

115

E-Print Network 3.0 - american biotic interchange Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

North... the Great American Interchange permitted the mixing of species between North and South America that formerly... the processes of biotic homogenization and biotic ......

116

E-Print Network 3.0 - african-american men major Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

African-American families own Source: North Carolina State University, North Carolina Solar Center Collection: Renewable Energy ; Energy Storage, Conversion and Utilization 71 An...

117

The 2004 Geothermal Map Of North America Explanation Of Resources...  

Open Energy Info (EERE)

in 1992 by the Geological Society of America (GSA). The American Association of Petroleum Geologist (AAPG) is publishing the 2004 Geothermal Map of North America (Blackwell...

118

Earth's Decelerating Tectonic Plates  

SciTech Connect (OSTI)

Space geodetic and oceanic magnetic anomaly constraints on tectonic plate motions are employed to determine a new global map of present-day rates of change of plate velocities. This map shows that Earth's largest plate, the Pacific, is presently decelerating along with several other plates in the Pacific and Indo-Atlantic hemispheres. These plate decelerations contribute to an overall, globally averaged slowdown in tectonic plate speeds. The map of plate decelerations provides new and unique constraints on the dynamics of time-dependent convection in Earth's mantle. We employ a recently developed convection model constrained by seismic, geodynamic and mineral physics data to show that time-dependent changes in mantle buoyancy forces can explain the deceleration of the major plates in the Pacific and Indo-Atlantic hemispheres.

Forte, A M; Moucha, R; Rowley, D B; Quere, S; Mitrovica, J X; Simmons, N A; Grand, S P

2008-08-22T23:59:59.000Z

119

Batterbury, S.P.J. 2008. Tenure or permanent contracts in North American higher education? A critical assessment. Policy Futures in Education 6 (3)  

E-Print Network [OSTI]

­ is an increasingly scarce commodity worldwide, it is still absolutely central to the recruitment and retention and firing employees according to changing demand for their services. 2. Tenure in North America Tenure, with sufficient time for research, and adequate pay. Tenure in the USA originated as a legitimate response

Batterbury, Simon

120

Surface preparation and plating  

SciTech Connect (OSTI)

This chapter covers electroplating and electroless nickel plating since coatings of this type play an important role in diamond turning technology. Items to be discussed include preparation of substrates prior to coating, plating defects such as pits and nodules and their influence on optics, the influence of stress in coatings, plating details for copper, gold, silver, and electroless nickel, and the importance of additives and their influence on grain size and structure of deposits. Some comments are made on future challenges that could be presented to the plating community to further improve the quality of coatings applied for diamond turning purposes. 60 references, 8 figures, 9 tables.

Dini, J.W.; Waldrop, F.B.; Reno, R.W.

1982-10-06T23:59:59.000Z

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Nitrided Metallic Bipolar Plates  

Broader source: Energy.gov (indexed) [DOE]

nitrided surface treatment. In this approach, an electrically-conductive and corrosion-resistant chromium-nitride surface layer is formed on the bipolar plate component by...

122

american climate study: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

than they naturally would Maryland at College Park, University of 34 Implications of climate change for North American wood warblers (Parulidae) CiteSeer Summary: Since 1912,...

123

american great lakes: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

polynorphismsobserved among the North American Great Lakes ciscoes suggest that this fish group has Bernatchez, Louis 2 Great Lakes CiteSeer Summary: Grant realized an...

124

Improving Conditions for Green Building Construction in North  

E-Print Network [OSTI]

green building a standard practice throughout North America. · In 2011, the CEC formed the TrilateralImproving Conditions for Green Building Construction in North America QUEST 2012 INTERNATIONAL Green Building Task Force, comprising North American leaders from the green building industry

125

The optimal reverse logistics network for consumer batteries in North America  

E-Print Network [OSTI]

The recycling of household consumer batteries is gaining legislative support throughout North America. The intent of this thesis document is to provide a broad overview of the current North American reverse logistics network ...

Rahman, Asgar

2013-01-01T23:59:59.000Z

126

The genus Solidago L. (Astereae, Asteraceae) in South America and related taxa in North America.  

E-Print Network [OSTI]

??The goldenrod genus Solidago L. is one of the larger genera in the flowering plant family Asteraceae. The genus is primarily North American and was (more)

Lopez Laphitz, Rita Maria

2009-01-01T23:59:59.000Z

127

Just Books Seminar VISIONS OF THE AMERICAN ENVIRONMENT: IMAGES TO ACTION  

E-Print Network [OSTI]

2 Just Books Seminar VISIONS OF THE AMERICAN ENVIRONMENT: IMAGES TO ACTION Spring 2013 posted X63075, goldin@brandeis.edu What role does the natural environment play in the North American of the natural environment in the North American vision, through the lens of books and selected readings, films

Snider, Barry B.

128

Nitrided Metallic Bipolar Plates  

SciTech Connect (OSTI)

The objectives are: (1) Develop and optimize stainless steel alloys amenable to formation of a protective Cr-nitride surface by gas nitridation, at a sufficiently low cost to meet DOE targets and with sufficient ductility to permit manufacture by stamping. (2) Demonstrate capability of nitridation to yield high-quality stainless steel bipolar plates from thin stamped alloy foils (no significant stamped foil warping or embrittlement). (3) Demonstrate single-cell fuel cell performance of stamped and nitrided alloy foils equivalent to that of machined graphite plates of the same flow-field design ({approx}750-1,000 h, cyclic conditions, to include quantification of metal ion contamination of the membrane electrode assembly [MEA] and contact resistance increase attributable to the bipolar plates). (4) Demonstrate potential for adoption in automotive fuel cell stacks. Thin stamped metallic bipolar plates offer the potential for (1) significantly lower cost than currently-used machined graphite bipolar plates, (2) reduced weight/volume, and (3) better performance and amenability to high volume manufacture than developmental polymer/carbon fiber and graphite composite bipolar plates. However, most metals exhibit inadequate corrosion resistance in proton exchange membrane fuel cell (PEMFC) environments. This behavior leads to high electrical resistance due to the formation of surface oxides and/or contamination of the MEA by metallic ions, both of which can significantly degrade fuel cell performance. Metal nitrides offer electrical conductivities up to an order of magnitude greater than that of graphite and are highly corrosion resistant. Unfortunately, most conventional coating methods (for metal nitrides) are too expensive for PEMFC stack commercialization or tend to leave pinhole defects, which result in accelerated local corrosion and unacceptable performance.

Brady, Michael P [ORNL; Tortorelli, Peter F [ORNL; Pihl, Josh A [ORNL; Toops, Todd J [ORNL; More, Karren Leslie [ORNL; Meyer III, Harry M [ORNL; Vitek, John Michael [ORNL; Wang, Heli [National Renewable Energy Laboratory (NREL); Turner, John [National Renewable Energy Laboratory (NREL); Wilson, Mahlon [Los Alamos National Laboratory (LANL); Garzon, Fernando [Los Alamos National Laboratory (LANL); Rockward, Tommy [Los Alamos National Laboratory (LANL); Connors, Dan [GenCell Corp; Rakowski, Jim [Allegheny Ludlum; Gervasio, Don [Arizona State University

2008-01-01T23:59:59.000Z

129

Plating under reduced pressure  

SciTech Connect (OSTI)

Plating under reduced pressure was evaluated for both electroless nickel and electrodeposited copper systems. The objective was to reduce pitting of these coatings thereby further enhancing their usage for diamond turning applications. Cursory experiments with electroless nickel showed reduced porosity when deposition was done at around 500 torr. Detailed experiments with electrodeposited copper at around 100 torr provided similar results. Scanning tunneling microscopy was effectively used to show the improvement in the copper deposits plated under reduced pressure. Benefits included reduced surface roughness and finer and denser grain structure.

Dini, J.W.; Beat, T.G.; Cowden, W.C. (Lawrence Livermore National Lab., CA (United States)); Ryan, L.E.; Hewitt, W.B. (TRW, Inc., Redondo Beach, CA (United States))

1992-06-01T23:59:59.000Z

130

Nuclear reactor alignment plate configuration  

DOE Patents [OSTI]

An alignment plate that is attached to a core barrel of a pressurized water reactor and fits within slots within a top plate of a lower core shroud and upper core plate to maintain lateral alignment of the reactor internals. The alignment plate is connected to the core barrel through two vertically-spaced dowel pins that extend from the outside surface of the core barrel through a reinforcement pad and into corresponding holes in the alignment plate. Additionally, threaded fasteners are inserted around the perimeter of the reinforcement pad and into the alignment plate to further secure the alignment plate to the core barrel. A fillet weld also is deposited around the perimeter of the reinforcement pad. To accomodate thermal growth between the alignment plate and the core barrel, a gap is left above, below and at both sides of one of the dowel pins in the alignment plate holes through with the dowel pins pass.

Altman, David A; Forsyth, David R; Smith, Richard E; Singleton, Norman R

2014-01-28T23:59:59.000Z

131

elementsair ceramic plate  

E-Print Network [OSTI]

many current day applications. Anything that creates waste heat (e.g. engines, computers, electronicsearth elementsair L ceramic plate Thermoelectric Module Construction for Low Temperature Gradient Power Generation Y. Meydbray, R. Singh, Ali Shakouri University of California at Santa Cruz, Electrical

132

Plates with incompatible prestrain  

E-Print Network [OSTI]

We study the effective elastic behavior of incompatibly prestrained plates, where the prestrain is independent of thickness as well as uniform through the thickness. We model such plates as three-dimensional elastic bodies with a prescribed pointwise stress-free state characterized by a Riemannian metric $G$ with the above properties, and seek the limiting behavior as the thickness goes to zero. Our results extand the prior analysis in M. Lewicka, M. R. Pakzad ESAIM Control Optim. Calc. Var. 17 (2011), no. 4. We first establish that the $\\Gamma$-limit is a Kirchhoff type bending. Further, we show that the minimum energy configuration contains non-trivial Kirchhoff type bending -- i.e., the scaling of the three-dimensional energy is of the order of the cube of the plate thickness -- if and only if the Riemann curvatures $R^3_{112}, R^3_{221}$ and $ R_{1212}$ of $G$ do not identically vanish. We demonstrate through examples, the existence of a new regime where the three above curvatures of $G$ vanish (while the mid-plane of the plate may or may not be flat), but the limiting configuration still has energy that is of the order of F\\"oppl - von K\\'arm\\'an plates. Finally, we apply these results to a model of nematic glass, including a characterization of the condition when the metric is immersible, for $G=\\mbox{Id}_3 +\\gamma\\vec n\\otimes \\vec n$ given in terms of the inhomogeneous unit director field distribution $\\vec n\\in\\mathbb{R}^3$.

Kaushik Bhattacharya; Marta Lewicka; Mathias Schffner

2014-01-08T23:59:59.000Z

133

Frequency Instability Problems in North American Interconnections  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

about such events and be motivated to respond in a more holistic manner. Exhibit 2-7 Combined Cycle Response to Frequency Change Source: NERC 2004 32 Nuclear power plants are...

134

The North American Forest Sector Outlook Study  

E-Print Network [OSTI]

to consumption patterns for wood products and bioenergy. Markets for wood products, which mainly are destined for packaging and miscellaneous uses will continue to enjoy strong global demand. Keywords Bioenergy, biomass, forest products, forest resources, future, GDP, globalization, import, increment, IPCC, markets

135

North American Technician Excellence Wayne Reedy  

E-Print Network [OSTI]

's largest non-profit certification organization for heating, ventilation, air conditioning and refrigeration/or Service certification in one or more SPECIALTY areas, including: Air Conditioning Air Distribution Heat and light HVACR commercial technicians in air conditioning, air distribution, heat pump, gas heating and oil

Oak Ridge National Laboratory

136

Chapter VI: Integrating North American Energy Markets  

Office of Environmental Management (EM)

i Considering these impacts over such a period leads to what is called the Global Warming Potential (GWP) of a GHG. The 100-year GWP for methane from the "Intergovernmental...

137

Alternative Regulation for North American Electric Utilities  

SciTech Connect (OSTI)

After a decade of favorable operating conditions, utilities find themselves faced with accelerating prices for key inputs and a growing need for new capacity. These pressures are likely to prompt increasingly frequent, and perhaps more contentious, rate cases. Steady progress in the development of alternative regulation provides hope that the utility industry will respond to these challenges much better than in 1975-85. (author)

Lowry, Mark Newton; Kaufmann, Lawrence

2006-06-15T23:59:59.000Z

138

North American Biofuels | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoading map...(Utility Company) Jump to:City)Norristown, Pennsylvania: Energy

139

North American Coating Laboratories | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoading map...(Utility Company) Jump to:City)Norristown, Pennsylvania: EnergyCoating

140

Chapter VI: Integrating North American Energy Markets  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New Substation SitesStanding FriedelIron-Sulfur3-1 November8-1 November

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

North American Electric Reliability Corporation (NERC): Reliability  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartment of Energy Advanced Framing -Nissan: ISO 50001

142

North American Electric Reliability Corporation Interconnections |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartment of Energy Advanced Framing -Nissan: ISO 50001Department of

143

North American Electric Reliability Council Outage Announcement |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartment of Energy Advanced Framing -Nissan: ISO 50001Department

144

North American Synchrophasor Initiative (NASPI) Program Information |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartment of Energy Advanced Framing -Nissan:Department of Energy

145

Annabella: a North American coasting vessel  

E-Print Network [OSTI]

and analysis of a type of craft that once was common to the eastern seaboard, including discussions about how the craft was designed and built for transporting specific cargoes, and how this ship may be representative of maritime activities and shipbuilding...

Claesson, Stefan Hans

1998-01-01T23:59:59.000Z

146

Number Suppletion in North American Indian Languages  

E-Print Network [OSTI]

. A Grammar of Southeastern Porno. UCPL 72. Newman, Stanley. 1965. Zuni Grammar. University of New Mexico Publi cations in Anthropology 14. Parks, Douglas R. 1976. A Grammar of Pawnee. New York: Garland. Radin, Paul. 1929. A Grammar of the Wappo...

Booker, Karen M.

1982-01-01T23:59:59.000Z

147

Frequency Instability Problems in North American Interconnections  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibilityFieldMinds"Office | Department

148

E-Print Network 3.0 - american moth synempora Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

A National Program to Manage the Gypsy Moth 15 Andrew M. Liebhold1 Summary: established alien populations: comparison of NorthAmerican gypsy moth colonies with invasion theory......

149

E-Print Network 3.0 - american monsoon region Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Variations of the Global Monsoon Precipitation in the Last Millennium: Results from ECHO-G Model Summary: monsoon and the Mexican-North American monsoon regions. However, the...

150

E-Print Network 3.0 - american summer monsoon Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Variations of the Global Monsoon Precipitation in the Last Millennium: Results from ECHO-G Model Summary: monsoon and the Mexican-North American monsoon regions. However, the...

151

E-Print Network 3.0 - american ref-fuel waste-to-energy Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Research and Technology Council (WTERT) Collection: Renewable Energy 50 Leaching of Dioxins from Municipal Waste Combustor Residues Summary: 12, 12th North American...

152

E-Print Network 3.0 - american waste-to-energy conference Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Research and Technology Council (WTERT) Collection: Renewable Energy 20 Leaching of Dioxins from Municipal Waste Combustor Residues Summary: 12, 12th North American...

153

Fuel cell end plate structure  

DOE Patents [OSTI]

The end plates (16) of a fuel cell stack (12) are formed of a thin membrane. Pressure plates (20) exert compressive load through insulation layers (22, 26) to the membrane. Electrical contact between the end plates (16) and electrodes (50, 58) is maintained without deleterious making and breaking of electrical contacts during thermal transients. The thin end plate (16) under compressive load will not distort with a temperature difference across its thickness. Pressure plate (20) experiences a low thermal transient because it is insulated from the cell. The impact on the end plate of any slight deflection created in the pressure plate by temperature difference is minimized by the resilient pressure pad, in the form of insulation, therebetween.

Guthrie, Robin J. (East Hartford, CT); Katz, Murray (Newington, CT); Schroll, Craig R. (Glastonbury, CT)

1991-04-23T23:59:59.000Z

154

Channel plate for DNA sequencing  

DOE Patents [OSTI]

This invention is a channel plate that facilitates data compaction in DNA sequencing. The channel plate has a length, a width and a thickness, and further has a plurality of channels that are parallel. Each channel has a depth partially through the thickness of the channel plate. Additionally an interface edge permits electrical communication across an interface through a buffer to a deposition membrane surface. 15 figs.

Douthart, R.J.; Crowell, S.L.

1998-01-13T23:59:59.000Z

155

Carbon-assisted flyer plates  

DOE Patents [OSTI]

A laser driven flyer plate utilizing an optical fiber connected to a laser. The end of the optical fiber has a layer of carbon and a metal layer deposited onto it. The carbon layer provides the laser induced plasma which is superior to the plasma produced from most metals. The carbon layer plasma is capable of providing a flatter flyer plate, converting more of the laser energy to driving plasma, promoting a higher flyer plate acceleration, and providing a more uniform pulse behind the plate. In another embodiment, the laser is in optical communication with a substrate onto which a layer of carbon and a layer of metal have been deposited.

Stahl, David B. (Los Alamos, NM); Paisley, Dennis L. (Santa Fe, NM)

1994-01-01T23:59:59.000Z

156

american tropical cyclone: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

24 25 Next Page Last Page Topic Index 21 Cross-equatorial influences of a South American cold surge on the development of two eastern North Pacific tropical cyclones Texas A&M...

157

Metal vapor arc ion plating  

DOE Patents [OSTI]

A method and apparatus for ion plating are described. The apparatus uses more negative than a first electrode voltage in a vacuum arc remelt system to attract low energy ions from the anode electrode to the article to be plated. 2 figs.

Bertram, L.A.; Fisher, R.W.; Mattox, D.M.; Zanner, F.J.

1986-09-09T23:59:59.000Z

158

High loading uranium fuel plate  

DOE Patents [OSTI]

Two embodiments of a high uranium fuel plate are disclosed which contain a meat comprising structured uranium compound confined between a pair of diffusion bonded ductile metal cladding plates uniformly covering the meat, the meat having a uniform high fuel loading comprising a content of uranium compound greater than about 45 Vol. % at a porosity not greater than about 10 Vol. %. In a first embodiment, the meat is a plurality of parallel wires of uranium compound. In a second embodiment, the meat is a dispersion compact containing uranium compound. The fuel plates are fabricated by a hot isostatic pressing process.

Wiencek, Thomas C. (Bolingbrook, IL); Domagala, Robert F. (Indian Head Park, IL); Thresh, Henry R. (Palos Heights, IL)

1990-01-01T23:59:59.000Z

159

Carbon-assisted flyer plates  

DOE Patents [OSTI]

A laser driven flyer plate is described utilizing an optical fiber connected to a laser. The end of the optical fiber has a layer of carbon and a metal layer deposited onto it. The carbon layer provides the laser induced plasma which is superior to the plasma produced from most metals. The carbon layer plasma is capable of providing a flatter flyer plate, converting more of the laser energy to driving plasma, promoting a higher flyer plate acceleration, and providing a more uniform pulse behind the plate. In another embodiment, the laser is in optical communication with a substrate onto which a layer of carbon and a layer of metal have been deposited. 2 figures.

Stahl, D.B.; Paisley, D.L.

1994-04-12T23:59:59.000Z

160

North Africa  

SciTech Connect (OSTI)

The total area covered by petroleum rights in the six countries described in this paper increased by more than 17% in 1980 compared to 1979. Joint venture agreements were finalized for 19 blocks over 94,000 km/sup 2/ in the Algerian venture. Although official information is scarce for Algeria and Libya, seismic activity probably increased in 1980 compared to 1979. Exploration drilling activity increased with 121 wildcats drilled compared to 93 during the previous year. This effort led to 40 discoveries, a 34.5% success ratio. Chevron was especially successful in wildcatting, with 6 oil discoveries for 8 wells drilled in the interior basins of Sudan. One Moroccan discovery can be considered as a highlight: the BRPM Meskala 101 well in the Essaouira basin found an apparently large amount of gas in Triassic sandstones. This discovery deserves special attention, since the gas has been found in Triassic pays rather than in the usual Jurassic pays in the Essaouira basin. Oil production in North Africa decreased from about 13.5% in 1980, with about 3,405,000 barrels of oil per day compared to 3,939,500 barrels of oil per day in 1979. When oil output strongly decreased in Algeria (-16.4%) and Libya (-15.6%), Tunisian production peaked at 116,287 barrels of oil per day and Egypt production also peaked at 584,148 barrels of oil per day. Total gas production in 1980 strongly declined from 44%, mostly due to the decline of the Algerian gas production. 8 figures, 40 tables.

Nicod, M.A.

1981-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

A review of "The Arts of 17th-Century Science: Representations of the Natural World in European and North American Culture." by Claire Jowitt and Diane Watt, eds.  

E-Print Network [OSTI]

: Planetary Astronomy in the Development of the Western World, [1957] 260). Claire Jowitt and Diane Watt, eds. The Arts of 17 th -Century Science: Representations of the Natural World in European and North Ameri- can Culture. Aldershot, U.K.: Ashgate... sources of the early modern period overlapped and influenced each other. Editors Claire Jowitt and Diane Watt skillfully separated the volume into four major topics, did a fine job selecting essays that explored these subjects, and placed essays...

Karol K. Weaver

2003-01-01T23:59:59.000Z

162

Armadillos exhibit less genetic polymorphism in North America than in South America: nuclear and mitochondrial data confirm founder effect in  

E-Print Network [OSTI]

1 Armadillos exhibit less genetic polymorphism in North America than in South America: nuclear compared between North and South American nine-banded armadillos (Dasypus novemcinctus: Xenarthra a founder effect during colonization of North America. Occurrence of polymorphism in the D

Paris-Sud XI, Université de

163

Plates for vacuum thermal fusion  

DOE Patents [OSTI]

A process for effectively bonding arbitrary size or shape substrates. The process incorporates vacuum pull down techniques to ensure uniform surface contact during the bonding process. The essence of the process for bonding substrates, such as glass, plastic, or alloys, etc., which have a moderate melting point with a gradual softening point curve, involves the application of an active vacuum source to evacuate interstices between the substrates while at the same time providing a positive force to hold the parts to be bonded in contact. This enables increasing the temperature of the bonding process to ensure that the softening point has been reached and small void areas are filled and come in contact with the opposing substrate. The process is most effective where at least one of the two plates or substrates contain channels or grooves that can be used to apply vacuum between the plates or substrates during the thermal bonding cycle. Also, it is beneficial to provide a vacuum groove or channel near the perimeter of the plates or substrates to ensure bonding of the perimeter of the plates or substrates and reduce the unbonded regions inside the interior region of the plates or substrates.

Davidson, James C. (Livermore, CA); Balch, Joseph W. (Livermore, CA)

2002-01-01T23:59:59.000Z

164

Forestry Policies (North Carolina)  

Broader source: Energy.gov [DOE]

North Carolina features almost 18 million acres of forested land within the state. The North Carolina Forest Service (http://ncforestservice.gov/) manages the State's forest lands, including those...

165

Forestry Policies (North Dakota)  

Broader source: Energy.gov [DOE]

North Dakota forests are managed by the North Dakota State Forest Service. In 2010 the State issued its "Statewide Assessment of Forest Resources and Forest Resource Strategy", which includes...

166

Corrosion resistant metallic bipolar plate  

DOE Patents [OSTI]

A corrosion resistant, electrically conductive component such as a bipolar plate for a PEM fuel cell includes 20 55% Cr, balance base metal such as Ni, Fe, or Co, the component having thereon a substantially external, continuous layer of chromium nitride.

Brady, Michael P. (Oak Ridge, TN); Schneibel, Joachim H. (Knoxville, TN); Pint, Bruce A. (Knoxville, TN); Maziasz, Philip J. (Oak Ridge, TN)

2007-05-01T23:59:59.000Z

167

University of North Carolina at Charlotte Design and Construction Manual Section 2, Division 03 Concrete  

E-Print Network [OSTI]

. American Concrete Institute (ACI) B. American Society for Testing and Materials (ASTM) C. Portland Cement ­ Concrete SECTION 2 DIVISION 03 CONCRETE #12;University of North Carolina at Charlotte Design and Construction Manual Section 2, Division 03 ­ Concrete DIVISION 3 - CONCRETE Note: This is a guide for Designers

Xie,Jiang (Linda)

168

Natural and Anthropogenic Ethanol Sources in North America and Potential Atmospheric Impacts of Ethanol Fuel Use  

E-Print Network [OSTI]

Natural and Anthropogenic Ethanol Sources in North America and Potential Atmospheric Impacts of Ethanol Fuel Use Dylan B. Millet,*, Eric Apel, Daven K. Henze,§ Jason Hill, Julian D. Marshall, Hanwant B-Chem chemical transport model to constrain present-day North American ethanol sources, and gauge potential long

Mlllet, Dylan B.

169

Dynamics of Transboundary Ground Water Management: Lessons from1 North America2  

E-Print Network [OSTI]

-Society-Science in Transition. Water Resources Development and8 Management Series, Berlin: Springer-Verlag, pp. 167-196]9 101 Dynamics of Transboundary Ground Water Management: Lessons from1 North America2 Michael E Abstract11 Transboundary ground water management in the North American countries of Canada, the United

Kurapov, Alexander

170

Landscape Evolution at an Active Plate Margin  

E-Print Network [OSTI]

Landscape Evolution at an Active Plate Margin edited and compiled by David R. Jessey and Robert E;32009 Desert Symposium Table of contents Landscape evolution at an active plate margin: a field trip

de Lijser, Peter

171

CNEA Fresh Fuel Plate Characterization Summary Report  

SciTech Connect (OSTI)

Characterization summary report outlining the findings of the fresh fuel examinations of the plates received from CNEA.

D. Keiser; F. Rice

2012-02-01T23:59:59.000Z

172

North Carolina Capital Access Program (North Carolina)  

Broader source: Energy.gov [DOE]

The North Carolina Capital Access Program provides matching reserve funds for business loans that are beyond the traditional lending means of a lenders usual standards. The average CAP loan is ...

173

One North Carolina Fund (North Carolina)  

Broader source: Energy.gov [DOE]

The One North Carolina Fund, directed by the Commerce Finance Center, helps recruit and expand jobs in high-value industries deemed vital to the state. State appropriations replenish the Fund and...

174

2011 Vibrations -1 VIBRATION OF PLATES & BARS  

E-Print Network [OSTI]

of plates of different shapes using Chladni patterns. APPARATUS: Function generator in FFTSCOPE, long and short flat bars, Chladni plates, salt, salt trays INTRODUCTION he equations of vibrational motion. The solutions become very complicated for the free boundary condition at the perimeter of the plate. The Chladni

Glashausser, Charles

175

Electroless metal plating of plastics  

DOE Patents [OSTI]

Process for plating main group metals on aromatic polymers is carried out by the use of a nonaqueous solution of a salt of an alkali metal in a positive valence state and a main group metal in a negative valence state with contact between the solution and polymer providing a redox reaction causing the deposition of the main group metal and the reduction of the polymer. Products from the process exhibit useful decorative and electrical properties.

Krause, Lawrence J. (Chicago, IL)

1986-01-01T23:59:59.000Z

176

Electroless metal plating of plastics  

DOE Patents [OSTI]

Process for plating main group metals on aromatic polymers is carried out by the use of a nonaqueous solution of a salt of an alkali metal in a positive valence state and a main group metal in a negative valence state with contact between the solution and polymer providing a redox reaction causing the deposition of the main group metal and the reduction of the polymer. Products from the process exhibit useful decorative and electrical properties.

Krause, L.J.

1982-09-20T23:59:59.000Z

177

Electroless metal plating of plastics  

DOE Patents [OSTI]

Process for plating main group metals on aromatic polymers is carried out by the use of a nonaqueous solution of a salt of an alkali metal in a positive valence state and a main group metal in a negative valence state with contact between the solution and polymer providing a redox reaction causing the deposition of the main group metal and the reduction of the polymer. Products from the process exhibit useful decorative and electrical properties.

Krause, Lawrence J. (Chicago, IL)

1984-01-01T23:59:59.000Z

178

Reconciling estimates of the contemporary North American carbon balance among terrestrial biosphere models, atmospheric inversions and a new approach for estimating net ecosystem exchange from inventory-based data  

SciTech Connect (OSTI)

We develop an approach for estimating net ecosystem exchange (NEE) using inventory-based information over North America (NA) for a recent 7-year period (ca. 2000 2006). The approach notably retains information on the spatial distribution of NEE, or the vertical exchange between land and atmosphere of all non-fossil fuel sources and sinks of CO2, while accounting for lateral transfers of forest and crop products as well as their eventual emissions. The total NEE estimate of a 327 252 TgC yr1 sink for NA was driven primarily by CO2 uptake in the Forest Lands sector (248 TgC yr1), largely in the Northwest and Southeast regions of the US, and in the Crop Lands sector (297 TgC yr1), predominantly in the Midwest US states. These sinks are counteracted by the carbon source estimated for the Other Lands sector (+218 TgC yr1), where much of the forest and crop products are assumed to be returned to the atmosphere (through livestock and human consumption). The ecosystems of Mexico are estimated tobe a small net source (+18 TgC yr1) due to land use change between 1993 and 2002. We compare these inventorybased estimates with results from a suite of terrestrial biosphere and atmospheric inversion models, where the mean continental-scale NEE estimate for each ensemble is 511 TgC yr1 and 931 TgC yr1, respectively. In the modeling approaches, all sectors, including Other Lands, were generally estimated to be a carbon sink, driven in part by assumed CO2 fertilization and/or lack of consideration of carbon sources from disturbances and product emissions. Additional fluxes not measured by the inventories, although highly uncertain, could add an additional 239 TgC yr1 to the inventory-based NA sink estimate, thus suggesting some convergence with the modeling approaches.

Hayes, Daniel J [ORNL; Turner, David P [Oregon State University, Corvallis; Stinson, Graham [Pacific Forestry Centre, Canadian Forest Service; Mcguire, David [University of Alaska; Wei, Yaxing [ORNL; West, Tristram O. [Joint Global Change Research Institute, PNNL; Heath, Linda S. [USDA Forest Service; De Jong, Bernardus [ECOSUR; McConkey, Brian G. [Agriculture and Agri-Food Canada; Birdsey, Richard A. [U.S. Department of Agriculture Forest Service; Kurz, Werner [Canadian Forest Service; Jacobson, Andrew [NOAA ESRL and CIRES; Huntzinger, Deborah [University of Michigan; Pan, Yude [U.S. Department of Agriculture Forest Service; Post, Wilfred M [ORNL; Cook, Robert B [ORNL

2012-01-01T23:59:59.000Z

179

Separator plate for a fuel cell  

DOE Patents [OSTI]

A separator plate is described for a fuel cell comprising an anode current collector, a cathode current collector and a main plate, the main plate disposed between the anode current collector and the cathode current collector. The anode current collector forms a flattened peripheral wet seal structure and manifold wet seal structure on the anode side of the separator plate and the cathode current collector forms a flattened peripheral wet seal structure and manifold wet seal structure on the cathode side of the separator plate. In this manner, the number of components required to manufacture and assemble a fuel cell stack is reduced. 9 figs.

Petri, R.J.; Meek, J.; Bachta, R.P.; Marianowski, L.G.

1996-04-02T23:59:59.000Z

180

Separator plate for a fuel cell  

DOE Patents [OSTI]

A separator plate for a fuel cell comprising an anode current collector, a cathode current collector and a main plate, the main plate disposed between the anode current collector and the cathode current collector. The anode current collector forms a flattened peripheral wet seal structure and manifold wet seal structure on the anode side of the separator plate and the cathode current collector forms a flattened peripheral wet seal structure and manifold wet seal structure on the cathode side of the separator plate. In this manner, the number of components required to manufacture and assemble a fuel cell stack is reduced.

Petri, Randy J. (Crete, IL); Meek, John (Downers Grove, IL); Bachta, Robert P. (Chicago, IL); Marianowski, Leonard G. (Mount Prospect, IL)

1996-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

E-Print Network 3.0 - american southwest desert Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

5 > >> 1 Neil E. West Utah State University Summary: ), f4 (Karroo Desert, Beaufort West, South Africa). From J. MacMahon (1985). In "North American... Deserts Neil E. West Utah...

182

Renaissance Zones (North Dakota)  

Broader source: Energy.gov [DOE]

Renaissance Zones allow qualifying businesses and individuals to claim one or more tax incentives for purchasing, leasing, or making improvements to real property located in a North Dakota...

183

North America Energy Efficiency Standards and Labeling  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office0-72.pdfGeorgeDoesn't32DepartmentWells |ofDepartment ofLiven t e g rNorth American

184

Rapidly Moving Divertor Plates In A Tokamak  

SciTech Connect (OSTI)

It may be possible to replace conventional actively cooled tokamak divertor plates with a set of rapidly moving, passively cooled divertor plates on rails. These plates would absorb the plasma heat flux with their thermal inertia for ~10-30 sec, and would then be removed from the vessel for processing. When outside the tokamak, these plates could be cooled, cleaned, recoated, inspected, and then returned to the vessel in an automated loop. This scheme could provide nearoptimal divertor surfaces at all times, and avoid the need to stop machine operation for repair of damaged or eroded plates. We describe various possible divertor plate designs and access geometries, and discuss an initial design for a movable and removable divertor module for NSTX-U.

S. Zweben

2011-05-16T23:59:59.000Z

185

Energy Policy Commission (North Dakota)  

Broader source: Energy.gov [DOE]

Created in 2007 by the North Dakota Legislative Assembly, the EmPower North Dakota Commission designed a comprehensive energy policy for the state of North Dakota. Since 2007 the Commission has...

186

Zirconium Plate Measuring Instrument (ZPMI) Design Report  

SciTech Connect (OSTI)

This report describes the design of a device intended to measure radiation-induced strain in zirconium plate specimens as a function of neutron fluence.

K. Davies; J. H. Jackson

2013-10-01T23:59:59.000Z

187

Fuel cell cooler-humidifier plate  

DOE Patents [OSTI]

A cooler-humidifier plate for use in a proton exchange membrane (PEM) fuel cell stack assembly is provided. The cooler-humidifier plate combines functions of cooling and humidification within the fuel cell stack assembly, thereby providing a more compact structure, simpler manifolding, and reduced reject heat from the fuel cell. Coolant on the cooler side of the plate removes heat generated within the fuel cell assembly. Heat is also removed by the humidifier side of the plate for use in evaporating the humidification water. On the humidifier side of the plate, evaporating water humidifies reactant gas flowing over a moistened wick. After exiting the humidifier side of the plate, humidified reactant gas provides needed moisture to the proton exchange membranes used in the fuel cell stack assembly. The invention also provides a fuel cell plate that maximizes structural support within the fuel cell by ensuring that the ribs that form the boundaries of channels on one side of the plate have ends at locations that substantially correspond to the locations of ribs on the opposite side of the plate.

Vitale, Nicholas G. (Albany, NY); Jones, Daniel O. (Glenville, NY)

2000-01-01T23:59:59.000Z

188

Flat-Plate Photovoltaic Module Basics  

Broader source: Energy.gov [DOE]

Flat-plate photovoltaic (PV) modules are made of several components, including the front surface materials, encapsulant, rear surface, and frame.

189

Coevolution of continental ice cover and permafrost extent over the last glacial-interglacial cycle in North  

E-Print Network [OSTI]

in North America Lev Tarasov1 and W. R. Peltier2 Received 14 August 2006; revised 20 March 2007; accepted both the most intense growth and recession phases. Citation: Tarasov, L., and W. R. Peltier (2007 of ice sheets across the North American continent [e.g., Tarasov and Peltier, 1999; Marshall et al., 2000

Peltier, W. Richard

190

AGU Monograph, Plate Boundary Zones, in press. Page 1 Crustal Block Rotations and Plate Coupling  

E-Print Network [OSTI]

AGU Monograph, Plate Boundary Zones, in press. Page 1 Crustal Block Rotations and Plate Coupling that considering both block rotations and fault locking significantly improves the fit to the data over models by locking on #12;AGU Monograph, Plate Boundary Zones, in press. Page 2 block-bounding faults and apply

McCaffrey, Robert

191

High temperature solar thermal technology: The North Africa Market  

SciTech Connect (OSTI)

High temperature solar thermal (HTST) technology offers an attractive option for both industrialized and non-industrialized countries to generate electricity and industrial process steam. The purpose of this report is to assess the potential market for solar thermal applications in the North African countries of Algeria, Egypt, Morocco and Tunisia. North Africa was selected because of its outstanding solar resource base and the variety of applications to be found there. Diminishing oil and gas resources, coupled with expanding energy needs, opens a large potential market for the US industry. The US high temperature solar trough industry has little competition globally and could build a large market in these areas. The US is already familiar with certain solar markets in North Africa due to the supplying of substantial quantities of US-manufactured flat plate collectors to this region.

Not Available

1990-12-01T23:59:59.000Z

192

Whole Earth Structure and Plate Tectonics  

E-Print Network [OSTI]

Whole Earth Structure and Plate Tectonics Earth Structure (2nd Edition), 2004 W.W. Norton & Co, New York Slide show by Ben van der Pluijm © WW Norton; unless noted otherwise #12;© EarthStructure (2nd ed evolution of Earth: from continental drift (early 1900's) to sea-floor spreading (early 1960's) to plate

193

Vacuum fusion bonding of glass plates  

DOE Patents [OSTI]

An improved apparatus and method for vacuum fusion bonding of large, patterned glass plates. One or both glass plates are patterned with etched features such as microstructure capillaries and a vacuum pumpout moat, with one plate having at least one hole therethrough for communication with a vacuum pumpout fixture. High accuracy alignment of the plates is accomplished by a temporary clamping fixture until the start of the fusion bonding heat cycle. A complete, void-free fusion bond of seamless, full-strength quality is obtained through the plates; because the glass is heated well into its softening point and because of a large, distributed force that is developed that presses the two plates together from the difference in pressure between the furnace ambient (high pressure) and the channeling and microstructures in the plates (low pressure) due to the vacuum drawn. The apparatus and method may be used to fabricate microcapillary arrays for chemical electrophoresis; for example, any apparatus using a network of microfluidic channels embedded between plates of glass or similar moderate melting point substrates with a gradual softening point curve, or for assembly of glass-based substrates onto larger substrates, such as in flat panel display systems.

Swierkowski, Steve P. (Livermore, CA); Davidson, James C. (Livermore, CA); Balch, Joseph W. (Livermore, CA)

2001-01-01T23:59:59.000Z

194

Vacuum fusion bonding of glass plates  

DOE Patents [OSTI]

An improved apparatus and method for vacuum fusion bonding of large, patterned glass plates. One or both glass plates are patterned with etched features such as microstructure capillaries and a vacuum pumpout moat, with one plate having at least one hole therethrough for communication with a vacuum pumpout fixture. High accuracy alignment of the plates is accomplished by a temporary clamping fixture until the start of the fusion bonding heat cycle. A complete, void-free fusion bond of seamless, full-strength quality is obtained through the plates; because the glass is heated well into its softening point and because of a large, distributed force that is developed that presses the two plates together from the difference in pressure between the furnace ambient (high pressure) and the channeling and microstructures in the plates (low pressure) due to the vacuum drawn. The apparatus and method may be used to fabricate microcapillary arrays for chemical electrophoresis; for example, any apparatus using a network of microfluidic channels embedded between plates of glass or similar moderate melting point substrates with a gradual softening point curve, or for assembly of glass-based substrates onto larger substrates, such as in flat panel display systems.

Swierkowski, Steve P. (Livermore, CA); Davidson, James C. (Livermore, CA); Balch, Joseph W. (Livermore, CA)

2000-01-01T23:59:59.000Z

195

Fuel Cell Stack Components BipolarPlate  

E-Print Network [OSTI]

Fuel Cell Stack Components Fuel Processor BipolarPlate Cathode+ Anode- Electrolyte H+ H+ HYDROGEN · Low-Platinum and Platinum-Free Catalysts for Oxygen Reduction at PEM Fuel Cell Cathodes · Low-Platinum-Loading Catalysts for Fuel Cells · Scale-Up of Carbon/Carbon Composite Bipolar Plates #12;Stack Component Projects

196

Nature Preserves (North Dakota)  

Broader source: Energy.gov [DOE]

The Parks and Recreation Department is responsible for managing and acquiring designated nature areas in the state of North Dakota. New construction and development is severely restricted on these...

197

DELIVERABLE Central North Sea  

E-Print Network [OSTI]

, as that has the same learning, but for more cost and more scale-up risk. The Central North Sea can produce into a guaranteed network for transportation and storage of captured CO2. Recent studies examining the levelised

Haszeldine, Stuart

198

Dam Safety (North Carolina)  

Broader source: Energy.gov [DOE]

North Carolina Administrative Code Title 15A, Subchapter 2K lays out further regulations for the design, approval, construction, maintenance, and inspection of dams to ensure public safety and...

199

Shock wave absorber having apertured plate  

DOE Patents [OSTI]

The shock or energy absorber disclosed herein utilizes an apertured plate maintained under the normal level of liquid flowing in a piping system and disposed between the normal liquid flow path and a cavity pressurized with a compressible gas. The degree of openness (or porosity) of the plate is between 0.01 and 0.60. The energy level of a shock wave travelling down the piping system thus is dissipated by some of the liquid being jetted through the apertured plate toward the cavity. The cavity is large compared to the quantity of liquid jetted through the apertured plate, so there is little change in its volume. The porosity of the apertured plate influences the percentage of energy absorbed.

Shin, Yong W. (Western Springs, IL); Wiedermann, Arne H. (Chicago Heights, IL); Ockert, Carl E. (Vienna, VA)

1985-01-01T23:59:59.000Z

200

Shock wave absorber having apertured plate  

DOE Patents [OSTI]

The shock or energy absorber disclosed herein utilizes an apertured plate maintained under the normal level of liquid flowing in a piping system and disposed between the normal liquid flow path and a cavity pressurized with a compressible gas. The degree of openness (or porosity) of the plate is between 0.01 and 0.60. The energy level of a shock wave travelling down the piping system thus is dissipated by some of the liquid being jetted through the apertured plate toward the cavity. The cavity is large compared to the quantity of liquid jetted through the apertured plate, so there is little change in its volume. The porosity of the apertured plate influences the percentage of energy absorbed.

Shin, Y.W.; Wiedermann, A.H.; Ockert, C.E.

1983-08-26T23:59:59.000Z

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Smithsonian American Art Museum 1 Smithsonian American Art Museum  

E-Print Network [OSTI]

Smithsonian American Art Museum 1 Smithsonian American Art Museum INVENTORY OF AMERICAN PAINTINGS): ___________________________________ _____________________________________________________________________________ EXECUTION DATE (if approximate, precede with circa): _____________________________ MEDIA oil pastel for contributing information to the national Inventory of American Paintings. Address completed reports

Mathis, Wayne N.

202

Journal of Nuclear Materials 191-194 (1992) 499-502 North-Holland  

E-Print Network [OSTI]

is done linearly in time and starts from the origin [2). Carbon-fiber-composite (CFC) is still seriouslyJournal of Nuclear Materials 191-194 (1992) 499-502 North-Holland journal of nuclear materials Analysis of sweeping heat loads on divertor plate materials * Ahmed Hassanein Argonne Nation.al Laboratory

Harilal, S. S.

203

Undrained behavior of plate anchors subjected to general loading  

E-Print Network [OSTI]

This study presents a method for predicting the undrained behavior of plate anchors, including out-of-plane loading of simple plates and performance of suction embedded plate anchors (SEPLA). Three dimensional finite element models are used...

Yang, Ming

2010-01-14T23:59:59.000Z

204

American Academy of Sleep Medicine American Academy of Sleep Medicine  

E-Print Network [OSTI]

American Academy of Sleep Medicine American Academy of Sleep Medicine The following product has been developed by the American Academy of Sleep Medicine Copyright 2003 American Academy of Sleep: (708) 492-0943 Visit Us at www.aasmnet.org #12; American Academy of Sleep Medicine American Academy

Goldman, Steven A.

205

Pervasive poleward shifts among North American bird species  

E-Print Network [OSTI]

Climate change is expected to influence species geographic distributions in the form of poleward and upward range expansion combined with extirpations from the equatorial and downslope sides of the distribution, but such shifts observed to date...

Peterson, A. Townsend; Martí nez-Meyer, Enrique

2009-01-01T23:59:59.000Z

206

North American Energy Ministers Take Further Action on Energy...  

Energy Savers [EERE]

their commitment to further aligning energy-efficiency standards on key consumer products, noting that recent collaborative efforts had resulted in the harmonization of...

207

ORIGINAL PAPER Would North American Paleoindians have Noticed  

E-Print Network [OSTI]

on reservoirs of greenhouse gases (including carbon dioxide and methane) and, in turn, on radiocarbon dating patterns (Faught 2008, p. 689); led to regional abandonment, `the demise of th

Holliday, Vance T.

208

North American Mobility Program Exchange Program with Memorial  

E-Print Network [OSTI]

Studies Water and Soil Science Waste Management #12;Horticulture Gardens #12;Rock Garden #12;The Marine ·Advanced Diplomas ·Sustainable Aquaculture ·Food Safety ·Coastal Zone Management ·Water Quality · Diplomas Molecular Biology and Genetics Organic Agriculture Plant and Animal Physiology Resource Management Rural

Buehrer, R. Michael

209

Invasion history of North American Canada thistle, Cirsium arvense  

E-Print Network [OSTI]

Guggisberg1 *, Erik Welk2 , Rene Sforza3 , David P. Horvath4 , James V. Anderson4 , Michael E. Foley4

Rieseberg, Loren

210

The fractionation and characterization of two North American lignites  

E-Print Network [OSTI]

Assignments for the TMSI Reaction Page TI Product of the Gascoyne Bitumen LIST OF FIGURES FIGURE I, Extraction and Fractionation Scheme for the Page Gascoyne Lignite 24 2. X-Ray Diffractogram of the Low-Temperature Ash of the Demineralized Wilcox... the required data by inductively coupled argon plasma-atomic emissions spectrometry, which was essential in the completion of the thesis. Many thanks goes out to Ahmad Moini for performing the X-ray diffraction on the samples submitted. Finally, I wish...

Garcia Juan Manuel

1985-01-01T23:59:59.000Z

211

Diesel Engine Strategy & North American Market Challenges, Technology...  

Broader source: Energy.gov (indexed) [DOE]

engine into every vehicle? GM's Long Term Vision GM's Long Term Vision Remove the automobile from the energy & environmental equation Remove the automobile from the energy &...

212

North American Short Line and Regional Railroads Industry Report  

Broader source: Energy.gov (indexed) [DOE]

45G Short Line Tax Credit 45G Short Line Tax Credit government owned short lines government owned short lines State grants State grants D.O.E. investment D.O.E. investment...

213

Fourth North American Symposium on Assessing the Environmental  

E-Print Network [OSTI]

reflect the views of the CEC or the governments of Canada, Mexico or the United States. This draft paper. How does trucking contribute to the correlation of air pollution at border ports relative to other trucking delays, congestion and air pollution problems at the border ports? This paper provides answers

214

North American Carsharing: A Ten-Year Retrospective  

E-Print Network [OSTI]

136. (10) Katzev, R. Car Sharing: A New Approach to UrbanJ. Burkhardt. TCRP Report 108: Car-Sharing: Where and How ItCustomer Survey Shows Car-Sharing Leads to Car Shedding.

Shaheen, Susan; Cohen, Adam P.; Chung, Melissa

2008-01-01T23:59:59.000Z

215

North American Carsharing: A Ten-Year Retrospective  

E-Print Network [OSTI]

136. (10) Katzev, R. Car Sharing: A New Approach to UrbanJ. Burkhardt. TCRP Report 108: Car-Sharing: Where and How ItCustomer Survey Shows Car-Sharing Leads to Car Shedding.

Shaheen, Susan A; Cohen, Adam; Chung, Melissa

2009-01-01T23:59:59.000Z

216

Stature Estimation Formulae for Indigenous North American Populations  

E-Print Network [OSTI]

2 Center for Archaeological Investigations, Southern Illinois University, Carbondale, IL 62901 3, and a Great Plains group. Sex-specific ordinary least squares regression formulae were developed based

Auerbach, Benjamin M.

217

Single Nucleotide Polymorphism Discovery in Elite North American Potato Germplasm  

E-Print Network [OSTI]

the representation of the potato transcriptome, we alignedPage 3 of 11 Table 2 Potato sequence and assembly statisticscultivars. Thus, we used the potato draft genome sequence

2011-01-01T23:59:59.000Z

218

NEMVP: North American energy measurement and verification protocol  

SciTech Connect (OSTI)

This measurement and verification protocol discusses procedures that,when implemented, allow buyers, sellers, and financiers of energy projects to quantify energy conservation measure performance and savings.

NONE

1996-03-01T23:59:59.000Z

219

AN EXAMINATION OF WOOD RECYCLING PROVISIONS IN NORTH AMERICAN GREEN  

E-Print Network [OSTI]

-use and recycling. About 90 green building standards were examined. Current green building programs were determined (ASHRAE) come closest to universally describing the differences between these terms: Recovered Material Building Standards To understand how wood recycling is addressed in green building standards, about 90

220

Understanding how the North American Monsoon creates an ozone  

E-Print Network [OSTI]

EPA NEI-05 + Mexico NEI · Biogenic emissions: MEGAN ­ online calculation based on T, PAR · Wildfire enhancement over southern US due to convective transport of O3 and its precursors coincident with lightning-produced NOx ­ The location of maximum O3 values is anywhere from northern Mexico to Florida #12;Previous work

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Endemism and functional convergence across the North American soil mycobiome  

E-Print Network [OSTI]

to Earth system models that inform citizens and policy makers of ecosystem dynamics and energy exchange

Silver, Whendee

222

Energy Secretary Moniz Will Host North American Energy Ministers in  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProvedDecember 2005DepartmentDecember 2011District |Department of Energy Visits

223

Opportunity Assessment Clean Diesels in the North American Light Duty  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d F SSales LLCDiesel Enginesthe U.S. -- An Overview |Market |

224

Secretary Chu Visits the 2012 North American International Auto Show |  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administrationcontroller systemsBi (2) Sr (2)ScienceScientistsON THE5, 2010TopNamed CalTours

225

North American Electric Reliability Council Power Outage Update |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartment of Energy Advanced Framing -Nissan: ISO

226

North American SynchroPhasor Initiative (NASPI) Technical Report -  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartment of Energy Advanced Framing -Nissan: ISOMeeting

227

North American SynchroPhasor Initiative (NASPI) Technical Report - Model  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartment of Energy Advanced Framing -Nissan: ISOMeetingValidation Using

228

North American SynchroPhasor Initiative (NASPI) Technical Report - Phasor  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartment of Energy Advanced Framing -Nissan: ISOMeetingValidation

229

North American SynchroPhasor Initiative (NASPI) Technical Reports |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartment of Energy Advanced Framing -Nissan:

230

North American Wind Energy Academy 2015 Symposium | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartment of Energy Advanced Framing -Nissan:Department of

231

North American Energy Ministers Meeting | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomen OwnedofDepartment ofJaredOak Ridge’sCutWorkersNiketa Kumar -News Media

232

Liquid Propane Injection Technology Conductive to Today's North American  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe10IO1OP001 LetterLight-Duty11.2.13 Liquid FuelsLiquid

233

Diesel Engine Strategy & North American Market Challenges, Technology and  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeat Pump Models |Conduct, Parent CompanyaUSAMPRelated PathStrategy |inGrowth |

234

NORTH AMERICAN ELECTRIC RELIABILITY COUNCIL: Preliminary Disturbance Report  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office0-72.pdfGeorgeDoesn't32Department ofMovingJanuary1 | EnergyFactFluor NOPRUSNIC NOPR|

235

Comments of North American Electric Reliability Corporation (NERC) to DOE  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power Systems EngineeringDepartmentSmart Grid RFI: Addressing Policy and Logistical Challenges |

236

Competition and Reliability in North American Electricity Markets Technical  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power Systems EngineeringDepartmentSmart Grid RFI:Fresno U.S. DepartmentWorkshop | Department of

237

Competition and Reliability in North American Energy Markets: Issue Paper  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power Systems EngineeringDepartmentSmart Grid RFI:Fresno U.S. DepartmentWorkshop | Department

238

Secretary Chu Visits the 2012 North American International Auto Show |  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists' Research |Regulation Services2014Need forDepartmentof theofD.C.Secretary Chu

239

North American Standard Level VI Inspection Program Update: Ensuring Safe  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15, 2010 PrintingNeed forNews »Department ofMeeting

240

North American Market Challenges for Diesel Engines | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d F S iPartnership ProgramDepartment ofCatalysts

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Bootstrapping a Sustainable North American PEM Fuel Cell Industry...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and fuel cell vehicles (Greene et al., 2008). The market for non-automotive PEM fuel cells, on the other hand, may be much closer to commercial viability (Stone, 2006)....

242

automatic license plate readers: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to causalism, building on Frankfurts concept of guidance. Ezio Di Nucci 151 Lesson 3. Plate Tectonics Overview Geosciences Websites Summary: Lesson 3. Plate Tectonics...

243

North American wood markets hit by United States housing crash North American wood markets hit by United States housing crash  

E-Print Network [OSTI]

themes were: 1. softwood market developments, and 2. wood energy and wood mobilization. The main use of wood for energy throughout the UNECE region, driven by policy measures and high oil prices development, which will have to try to balance the needs of the established wood products sector and the bio-energy

244

Plate subrotations Marco Cuffaro,1,2  

E-Print Network [OSTI]

to compute relative motion of two plates not sharing a margin. [3] Relative motions are important contemporaneous rotation about its axis, or as a car that starts swinging while traveling. [8] In this paper, we

Doglioni, Carlo

245

Characterization of Tri-lab Tantalum Plate.  

SciTech Connect (OSTI)

This report provides a detailed characterization Tri-lab Tantalum (Ta) plate jointly purchased from HCStark Inc. by Sandia, Los Alamos and Lawrence Livermore National Laboratories. Data in this report was compiled from series of material and properties characterization experiments carried out at Sandia (SNL) and Los Alamos (LANL) Laboratories through a leveraged effort funded by the C2 campaign. Results include microstructure characterization detailing the crystallographic texture of the material and an increase in grain size near the end of the rolled plate. Mechanical properties evaluations include, compression cylinder, sub-scale tension specimen, micohardness and instrumented indentation testing. The plate was found to have vastly superior uniformity when compare with previously characterized wrought Ta material. Small but measurable variations in microstructure and properties were noted at the end, and at the top and bottom edges of the plate.

Buchheit, Thomas E.; Cerreta, Ellen K.; Deibler, Lisa Anne; Chen, Shu-Rong; Michael, Joseph R.

2014-09-01T23:59:59.000Z

246

Necessity and Requirements of a Collaborative Effort to Develop a Large Wind Turbine Blade Test Facility in North America  

SciTech Connect (OSTI)

The wind power industry in North America has an immediate need for larger blade test facilities to ensure the survival of the industry. Blade testing is necessary to meet certification and investor requirements and is critical to achieving the reliability and blade life needed for the wind turbine industry to succeed. The U.S. Department of Energy's (DOE's) Wind Program is exploring options for collaborating with government, private, or academic entities in a partnership to build larger blade test facilities in North America capable of testing blades up to at least 70 m in length. The National Renewable Energy Laboratory (NREL) prepared this report for DOE to describe the immediate need to pursue larger blade test facilities in North America, categorize the numerous prospective partners for a North American collaboration, and document the requirements for a North American test facility.

Cotrell, J.; Musial, W.; Hughes, S.

2006-05-01T23:59:59.000Z

247

Composite bipolar plate for electrochemical cells  

DOE Patents [OSTI]

A bipolar separator plate for fuel cells consists of a molded mixture of a vinyl ester resin and graphite powder. The plate serves as a current collector and may contain fluid flow fields for the distribution of reactant gases. The material is inexpensive, electrically conductive, lightweight, strong, corrosion resistant, easily mass produced, and relatively impermeable to hydrogen gas. The addition of certain fiber reinforcements and other additives can improve the properties of the composite material without significantly increasing its overall cost.

Wilson, Mahlon S. (Los Alamos, NM); Busick, Deanna N. (Los Alamos, NM)

2001-01-01T23:59:59.000Z

248

The analysis of orthogonally stiffened plates  

E-Print Network [OSTI]

THE ANALTSIS OP ORTHOGONALLY STIPPENED PLATES A Thesis By VIRGIL O'HEAL BBNNBTT, JR. Submitted to the Graduate College of the Texas A&M University in partial fulfi. llment of the requirements for the degree of MASTER OP SCIENCB Msy 1966... Major Subject. "Aerospace Engineering THE ANALYSIS OF ORTHOGONALLY BTIFFBNED PLATES A Thesis By VIRGIL O'NBAL BBNNETT, JR. Approved as to style and content by: (Chai. n Committee) (Head of Department) (Ne er) (Member ) Hsy 1966 ACKNOWLEICMENTS...

Bennett, Virgil O'Neal

2012-06-07T23:59:59.000Z

249

Lighting system with heat distribution face plate  

DOE Patents [OSTI]

Lighting systems having a light source and a thermal management system are provided. The thermal management system includes synthetic jet devices, a heat sink and a heat distribution face plate. The synthetic jet devices are arranged in parallel to one and other and are configured to actively cool the lighting system. The heat distribution face plate is configured to radially transfer heat from the light source into the ambient air.

Arik, Mehmet; Weaver, Stanton Earl; Stecher, Thomas Elliot; Kuenzler, Glenn Howard; Wolfe, Jr., Charles Franklin; Li, Ri

2013-09-10T23:59:59.000Z

250

Microsoft Word - CX-NorthBonneville-RossNorthBonneville-Troutdale...  

Broader source: Energy.gov (indexed) [DOE]

4, 2011 REPLY TO ATTN OF: KEP-4 SUBJECT: Environmental Clearance Memorandum Erich Orth Civil Engineer - TEP-TPP-3 Proposed Action: North Bonneville-Ross 1 230-kV, North...

251

Corrosion test cell for bipolar plates  

DOE Patents [OSTI]

A corrosion test cell for evaluating corrosion resistance in fuel cell bipolar plates is described. The cell has a transparent or translucent cell body having a pair of identical cell body members that seal against opposite sides of a bipolar plate. The cell includes an anode chamber and an cathode chamber, each on opposite sides of the plate. Each chamber contains a pair of mesh platinum current collectors and a catalyst layer pressed between current collectors and the plate. Each chamber is filled with an electrolyte solution that is replenished with fluid from a much larger electrolyte reservoir. The cell includes gas inlets to each chamber for hydrogen gas and air. As the gases flow into a chamber, they pass along the platinum mesh, through the catalyst layer, and to the bipolar plate. The gas exits the chamber through passageways that provide fluid communication between the anode and cathode chambers and the reservoir, and exits the test cell through an exit port in the reservoir. The flow of gas into the cell produces a constant flow of fresh electrolyte into each chamber. Openings in each cell body is member allow electrodes to enter the cell body and contact the electrolyte in the reservoir therein. During operation, while hydrogen gas is passed into one chamber and air into the other chamber, the cell resistance is measured, which is used to evaluate the corrosion properties of the bipolar plate.

Weisbrod, Kirk R. (Los Alamos, NM)

2002-01-01T23:59:59.000Z

252

A new refined theory of plates with transverse shear deformation for moderately thick and thick plates  

E-Print Network [OSTI]

In this paper we propose a new refined shear deformation plate theory which possesses a series of desirable features, the most salient of which are as follows: (i) The loads, which are generally considered to be applied on the middle surface of the plate, act on the upper surface of the plate; (ii) The equations are applicable to the calculation of the stresses in isotropic plates and provide the same order of accuracy as several theories with second order shear deformation effects; (iii) It constitutes a theory, in the sense defined by Love, since it gives easy expressions for application to problems in different fields in architecture and civil engineering

Valle, Jose Miguel Martinez

2015-01-01T23:59:59.000Z

253

North America Europe Central &  

E-Print Network [OSTI]

Per capita consumption Population (100 millions) 0 5 10 15 20 25 30 35 North America Western Europe Per capita consumption Population (100 millions) 0 5 10 15 20 25 30 35 #12;2 % of habitat alteration from% of habitat alteration from per capita consumptionper capita consumption #s above bars are m2 per

Johnson, Matthew

254

Denaturing Urea PAGE -Large Gel Preparation of Glass Plates  

E-Print Network [OSTI]

for short glass plate. Wear gloves. 3. Place long glass plate on 2 foam rectangles. Set up spacers and short32 Denaturing Urea PAGE - Large Gel Preparation of Glass Plates 1. Clean glass plates and comb pipette, add 5 drops of dichlorodimethylsilane (Aldrich D6,082-6) to 5 mls of acetone in diposable glass

Aris, John P.

255

Recovery process for electroless plating baths  

DOE Patents [OSTI]

A process for removing, from spent electroless metal plating bath solutions, accumulated byproducts and counter-ions that have deleterious effects on plating. The solution, or a portion thereof, is passed through a selected cation exchange resin bed in hydrogen form, the resin selected from strong acid cation exchangers and combinations of intermediate acid cation exchangers with strong acid cation exchangers. Sodium and nickel ions are sorbed in the selected cation exchanger, with little removal of other constituents. The remaining solution is subjected to sulfate removal through precipitation of calcium sulfate hemihydrate using, sequentially, CaO and then CaCO.sub.3. Phosphite removal from the solution is accomplished by the addition of MgO to form magnesium phosphite trihydrate. The washed precipitates of these steps can be safely discarded in nontoxic land fills, or used in various chemical industries. Finally, any remaining solution can be concentrated, adjusted for pH, and be ready for reuse. The plating metal can be removed from the exchanger with sulfuric acid or with the filtrate from the magnesium phosphite precipitation forming a sulfate of the plating metal for reuse. The process is illustrated as applied to processing electroless nickel plating baths.

Anderson, Roger W. (Farragut, TN); Neff, Wayne A. (Knoxville, TN)

1992-01-01T23:59:59.000Z

256

Recovery process for electroless plating baths  

DOE Patents [OSTI]

A process is described for removing, from spent electroless metal plating bath solutions, accumulated byproducts and counter-ions that have deleterious effects on plating. The solution, or a portion thereof, is passed through a selected cation exchange resin bed in hydrogen form, the resin selected from strong acid cation exchangers and combinations of intermediate acid cation exchangers with strong acid cation exchangers. Sodium and nickel ions are sorbed in the selected cation exchanger, with little removal of other constituents. The remaining solution is subjected to sulfate removal through precipitation of calcium sulfate hemihydrate using, sequentially, CaO and then CaCO[sub 3]. Phosphite removal from the solution is accomplished by the addition of MgO to form magnesium phosphite trihydrate. The washed precipitates of these steps can be safely discarded in nontoxic land fills, or used in various chemical industries. Finally, any remaining solution can be concentrated, adjusted for pH, and be ready for reuse. The plating metal can be removed from the exchanger with sulfuric acid or with the filtrate from the magnesium phosphite precipitation forming a sulfate of the plating metal for reuse. The process is illustrated as applied to processing electroless nickel plating baths. 18 figs.

Anderson, R.W.; Neff, W.A.

1992-05-12T23:59:59.000Z

257

Highly conductive composites for fuel cell flow field plates and bipolar plates  

DOE Patents [OSTI]

This invention provides a fuel cell flow field plate or bipolar plate having flow channels on faces of the plate, comprising an electrically conductive polymer composite. The composite is composed of (A) at least 50% by weight of a conductive filler, comprising at least 5% by weight reinforcement fibers, expanded graphite platelets, graphitic nano-fibers, and/or carbon nano-tubes; (B) polymer matrix material at 1 to 49.9% by weight; and (C) a polymer binder at 0.1 to 10% by weight; wherein the sum of the conductive filler weight %, polymer matrix weight % and polymer binder weight % equals 100% and the bulk electrical conductivity of the flow field or bipolar plate is at least 100 S/cm. The invention also provides a continuous process for cost-effective mass production of the conductive composite-based flow field or bipolar plate.

Jang, Bor Z; Zhamu, Aruna; Song, Lulu

2014-10-21T23:59:59.000Z

258

Market reactions to animal disease: the case of bovine spongiform encephalopathy discoveries in North America  

E-Print Network [OSTI]

disease outbreaks using data from recent U.S. and Canada bovine spongiform encephalopathy (BSE) cases. An empirical study was carried out on the impact of the North American BSE cases. Using a time series approach, this study detected a significant...

Hu, Rong

2009-05-15T23:59:59.000Z

259

A severe centennial-scale drought in mid-continental North America 4200 years ago  

E-Print Network [OSTI]

in timing, duration and magnitude to that recorded in the central North American records. Some regions forcing or amplification of these spatial modes by variations in solar irradiance or volcanism. However are insufficient to estimate magnitude of changes in solar and volcanic forcing at this time. Further research

Booth, Robert K.

260

ORIGINAL PAPER Changes in El Nio and La Nia teleconnections over North  

E-Print Network [OSTI]

­America in the global warming simulations Jong-Seong Kug & Soon-Il An & Yoo-Geun Ham & In-Sik Kang Received: 7 July 2008 warming commonly causes the eastward shift of the atmospheric teleconnection patterns over the Northern and La Niña over the North Pacific and American regions due to a future greenhouse warming has been

Kang, In-Sik

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Quality assurance in small plating shops  

SciTech Connect (OSTI)

The potential for electroless nickel coatings in oilfield and petrochemical applications is quite high. The greatest obstacle to their use has been a reputation for poor quality due to a lack of quality control in many plating shops. To overcome this, electroless nickel shops should not only have a quality control program in their operation, but must also document its use and success. This article describes how a plating shoe can develop the necessary procedures, manuals, and paperwork trail to offer quality assurance and to satisfy customers.

McNabb, W.J. (Electroless Nickel Plating of Louisiana, Hammond, LA (United States))

1993-10-01T23:59:59.000Z

262

Ponderomotive phase plate for transmission electron microscopes  

DOE Patents [OSTI]

A ponderomotive phase plate system and method for controllably producing highly tunable phase contrast transfer functions in a transmission electron microscope (TEM) for high resolution and biological phase contrast imaging. The system and method includes a laser source and a beam transport system to produce a focused laser crossover as a phase plate, so that a ponderomotive potential of the focused laser crossover produces a scattering-angle-dependent phase shift in the electrons of the post-sample electron beam corresponding to a desired phase contrast transfer function.

Reed, Bryan W. (Livermore, CA)

2012-07-10T23:59:59.000Z

263

North American Journal of Aquaculture 64:228231, 2002 Copyright by the American Fisheries Society 2002  

E-Print Network [OSTI]

. E. MAUGHAN AND S. A. BONAR Arizona Cooperative Fish and Wildlife Research Unit, U.S. Geological/s. A DC electric barrier and screened knife gate valves prevented fish from leaving the test section regulated water velocity with a 3.8-cm adjustable gate valve on the pump outlet. A 1.3-cm PVC pipe attached

Bonar, Scott A.

264

Fabrication of nickel microbump on aluminum using electroless nickel plating  

SciTech Connect (OSTI)

Fabrication of nickel microbumps on an aluminum electrode using a nickel displacement and a direct nickel plating process was investigated. Electroless nickel plating reaction with hypophosphite as a reducing agent was not initiated on the aluminum substrate, because aluminum does not have catalytic action on the oxidation of hypophosphite. Accordingly, nickel was initially deposited on the aluminum using nickel displacement plating for the initiation of the electroless plating. Nickel bumps on the aluminum electrode were fabricated by treatment of the nickel displacement plating followed by electroless nickel plating. Nickel microbumps also can be formed on the aluminum electrode without the displacement plating process. Activation of the aluminum surface is an indispensable process to initiate electroless nickel plating. Uniform bumps 20 {micro}m wide and 15 {micro}m high with good configuration were obtained by direct nickel plating after being activated with dimethyl amine borane.

Watanabe, H.; Honma, H. [Kanto Gakuin Univ., Yokohama, Kanagawa (Japan). Faculty of Engineering

1997-02-01T23:59:59.000Z

265

Precedents in African American architecture  

E-Print Network [OSTI]

As a sub-sets of American culture, African Americans have not been able to offer culturally specific architectural elements to the design process because the history of African American form and space has not been recognized ...

Sass, Lawrence

1994-01-01T23:59:59.000Z

266

Metallic Bipolar Plates with Composite Coatings  

E-Print Network [OSTI]

that is available in sheet form For corrosion resistance, apply a coating that is a composite of two materials: ­ Filler to provide electrical conductivity · Candidate Materials: graphite, carbon black, TiB2 and CaB6Metallic Bipolar Plates with Composite Coatings Jennifer Mawdsley Argonne National Laboratory Fuel

267

Brazed bipolar plates for PEM fuel cells  

DOE Patents [OSTI]

A liquid-cooled, bipolar plate separating adjacent cells of a PEM fuel cell comprises corrosion-resistant metal sheets brazed together so as to provide a passage between the sheets through which a dielectric coolant flows. The brazement comprises a metal which is substantially insoluble in the coolant. 6 figs.

Neutzler, J.K.

1998-07-07T23:59:59.000Z

268

Titanium carbide bipolar plate for electrochemical devices  

DOE Patents [OSTI]

A corrosion resistant, electrically conductive, non-porous bipolar plate is made from titanium carbide for use in an eletrochemical device. The process involves blending titanium carbide powder with a suitable binder material, and molding the mixture, at an elevated temperature and pressure.

LaConti, Anthony B. (Lynnfield, MA); Griffith, Arthur E. (Lynn, MA); Cropley, Cecelia C. (Acton, MA); Kosek, John A. (Danvers, MA)

2000-07-04T23:59:59.000Z

269

Fabrication procedures for HFIR control plates  

SciTech Connect (OSTI)

The HFIR control system uses Alclad cylindrically shaped components, which have regions containing 31 vol % Eu/sub 2/O/sub 3/ and 38 vol % Ta, respectively. Exacting control of the water passage between these components and adjacent reactor parts is mandatory, and precise dimensional control of the finished products is required. This report describes the procedures developed for manufacturing outer control plates and inner control cylinders. Results are cited which demonstrate that circular-shaped outer control plates can be produced with less than 0.025-in. variation from the specified 9.300-in. radius in any region of the plate. Other results show that, by the exercise of careful control, inner control, inner control plates can be welded into cylindrical geometry with diametrical variations held to less than +- 0.010 in. of the intended 17.846-in. average diam. The cylinders can then be explosively sized, while under compression, with diametric variations of less than 0.005 in. while controlling roundness variations to less than 0.030 in. from the specified 17.842-in. finished diam.

Bowden, G.A.; Hicks, G.R.; Knight, R.W.

1984-10-01T23:59:59.000Z

270

Metalization of lipid vesicles via electroless plating  

SciTech Connect (OSTI)

The encapsulation of metallic particles and metallic oxides within lipid vesicles has recently been of interest for applications such as catalysis, water splitting, and magnetic control of spin coupling. In this communication the authors introduce the concept and practice of the deposition of metal on vesicles by using electroless plating techniques. Coordination of low valent transition metals to organic functional groups on the surface of the bilayer membrane provides a means of binding metal atoms to vesicles. Chemical reduction produced zero valent atoms which serve as sites for further metal deposition by the chemical reduction techniques of electroless plating. Specifically, this procedure involved the binding of a small amount of tetrachloropalladate to the vesicle bilayer, reduction of the palladium(II) to palladium(0), followed by the deposition of much larger amounts of metal from an electroless plating solution. Electroless plating solutions were used for the deposition of palladium, nickel, cobalt, or copper metal onto the catalytic palladium centers. Since the metallic particles were associated with the vesicles, colloids were formed that were stable in water for much longer periods than the control metal particles formed in water alone. If the vesicles were composed in part of unsaturated lipids, with the olefinic groups on the hydrocarbon chains, the initial evidence suggests the transition metal was directed into the bilayer, rather than staying on the surface.

Ferrar, W.T.; O'Brien, D.F.; Warshawsky, A.; Voycheck, C.L.

1988-01-06T23:59:59.000Z

271

Ground Turkey and Potato Plate Ingredients  

E-Print Network [OSTI]

Ground Turkey and Potato Plate Ingredients: 1 onion 1/2 pound ground turkey 1 cup ketchup, low sodium 4 medium potatoes 4 ounces cheddar cheese, low-fat Directions 1. Cut the ends off of the onion. Meanwhile pierce potatoes in several places with fork. Place on baking dish in microwave oven. Microwave

Liskiewicz, Maciej

272

Titanium Carbide Bipolar Plate for Electrochemical Devices  

SciTech Connect (OSTI)

Titanium carbide comprises a corrosion resistant, electrically conductive, non-porous bipolar plate for use in an electrochemical device. The process involves blending titanium carbide powder with a suitable binder material, and molding the mixture, at an elevated temperature and pressure.

LaConti, Anthony B.; Griffith, Arthur E.; Cropley, Cecelia C.; Kosek, John A.

1998-05-08T23:59:59.000Z

273

Brazed bipolar plates for PEM fuel cells  

DOE Patents [OSTI]

A liquid-cooled, bipolar plate separating adjacent cells of a PEM fuel cell comprising corrosion-resistant metal sheets brazed together so as to provide a passage between the sheets through which a dielectric coolant flows. The brazement comprises a metal which is substantially insoluble in the coolant.

Neutzler, Jay Kevin (Rochester, NY)

1998-01-01T23:59:59.000Z

274

Spectral characterization of storage phosphor imaging plates  

SciTech Connect (OSTI)

This work presents attenuation and sensitivity measurements of radiographic imaging plates (IPs) with quasimonoenergetic X-rays in the 860 kiloelectronvolt range. The measurements are used to validate theoretical predictions. A short overview of the theoretical model is given. The model can be used to describe the sensitivity of different detector types to a wide range of X-ray energies.

Deresch, A.; Jechow, M.; Gollwitzer, C. [Federal Institute for Materials Research and Testing Unter den Eichen 87, 12205 Berlin (Germany)

2014-02-18T23:59:59.000Z

275

Bending Energy of Rods and Plates  

E-Print Network [OSTI]

descriptors DUH HFFHQWULFLW\\ VSKHULFLW\\ 3$ SHULPHWHU VTXDUHG GLYLGHG E\\ WLPHV area) and bending energy185 Chapter 9 Bending Energy of Rods and Plates Integrated curvature and bending energy of a closed curvature/energy values over a chain-code description of the contour (as in binary length estimators). We

van Vliet, Lucas J.

276

Fuel cell plates with improved arrangement of process channels for enhanced pressure drop across the plates  

DOE Patents [OSTI]

A plate for a fuel cell has an arrangement of ribs defining an improved configuration of process gas channels and slots on a surface of the plate which provide a modified serpentine gas flow pattern across the plate surface. The channels are generally linear and arranged parallel to one another while the spaced slots allow cross channel flow of process gas in a staggered fashion which creates a plurality of generally mini-serpentine flow paths extending transverse to the longitudinal gas flow along the channels. Adjacent pairs of the channels are interconnected to one another in flow communication. Also, a bipolar plate has the aforementioned process gas channel configuration on one surface and another configuration on the opposite surface. In the other configuration, there are not slots and the gas flow channels have a generally serpentine configuration.

Spurrier, Francis R. (Whitehall Boro, PA); Pierce, Bill L. (Whitehall Boro, PA); Wright, Maynard K. (Bethel Park, PA)

1986-01-01T23:59:59.000Z

277

Virginia Nuclear Profile - North Anna  

U.S. Energy Information Administration (EIA) Indexed Site

North Anna" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor (percent)","Type","Commercial operation date","License expiration date"...

278

Ground Water Protection (North Dakota)  

Broader source: Energy.gov [DOE]

North Dakota has a degradation prevention program for groundwater protection, with standards established by the Department of Health. This section addresses groundwater standards, quality...

279

A slotted orifice plate used as a flow measurement device  

E-Print Network [OSTI]

The standard orifice plate is used extensively by the natural gas industry for the metering of fuel. Because of the costs associated with errors in flow measurement inherent with the use of a standard orifice plate, any improvements upon...

Macek, Michael Lee

2012-06-07T23:59:59.000Z

280

A fuel cell stack with Heterogeneous composite bipolar plate.  

E-Print Network [OSTI]

??The design of the bipolar plates decides most of the cost of Fuel Cell.Bipolar plate has a great influence in Fuel Cell performance.We choose carbon (more)

Lai, Cheng-chih

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Smithsonian American Art Museum INVENTORIES OF AMERICAN PAINTING AND SCULPTURE  

E-Print Network [OSTI]

Smithsonian American Art Museum INVENTORIES OF AMERICAN PAINTING AND SCULPTURE GUIDELINES FOR REPORTING WORKS The INVENTORIES OF AMERICAN PAINTING AND SCULPTURE were created by the Smithsonian American collections around the country. The database for the Inventories references over 360,000 works from two

Mathis, Wayne N.

282

Selective Electroless Nickel Plating of Particle Arrays on Polyelectrolyte Multilayers  

E-Print Network [OSTI]

Selective Electroless Nickel Plating of Particle Arrays on Polyelectrolyte Multilayers Ilsoon Lee Received June 30, 2003. Revised Manuscript Received September 25, 2003 Selective electroless nickel plating, it was demonstrated that selective electroless nickel plating on complex 3-D microstructures with submicron resolution

Lee, Ilsoon

283

Wave turbulence served up on a plate  

E-Print Network [OSTI]

Wave turbulence in a thin elastic plate is experimentally investigated. By using a Fourier transform profilometry technique, the deformation field of the plate surface is measured simultaneously in time and space. This enables us to compute the wavevector-frequency Fourier ($\\mathbf k, \\omega$) spectrum of the full space-time deformation velocity. In the 3D ($\\mathbf k, \\omega$) space, we show that the energy of the motion is concentrated on a 2D surface that represents a nonlinear dispersion relation. This nonlinear dispersion relation is close to the linear dispersion relation. This validates the usual wavenumber-frequency change of variables used in many experimental studies of wave turbulence. The deviation from the linear dispersion, which increases with the input power of the forcing, is attributed to weak non linear effects. Our technique opens the way for many new extensive quantitative comparisons between theory and experiments of wave turbulence.

Pablo Cobelli; Philippe Petitjeans; Agnes Maurel; Vincent Pagneux; Nicolas Mordant

2009-10-28T23:59:59.000Z

284

Your Mission: To become familiar with the major plate boundaries through exploration of plate tectonic features using Google Earth.  

E-Print Network [OSTI]

boundaries through exploration of plate tectonic features using Google Earth. Your Supplies: (1) A computer with internet access and the Google Earth program of Earth's tectonic plates using Google Earth. To do this, login

Smith-Konter, Bridget

285

Vision North Texas  

E-Print Network [OSTI]

, 2011 ? ? FW D 16 County Region for Vision North Texas 5.3M people in 2000; 6.5M in 2010; 9.5M in 2030; 11.7M in 2050 ESL-KT-11-11-18 CATEE 2011, Dallas, Texas, Nov. 7 ? 9, 2011 ESL-KT-11-11-18 CATEE 2011, Dallas, Texas, Nov. 7 ? 9, 2011 ESL-KT-11..., Dallas, Texas, Nov. 7 ? 9, 2011 ESL-KT-11-11-18 CATEE 2011, Dallas, Texas, Nov. 7 ? 9, 2011 ESL-KT-11-11-18 CATEE 2011, Dallas, Texas, Nov. 7 ? 9, 2011 2030 ?Business as usual? households/acre ESL-KT-11-11-18 CATEE 2011, Dallas, Texas, Nov. 7 ? 9, 2011...

Walz, K.

2011-01-01T23:59:59.000Z

286

Vibrations of circular steel plates with damping  

E-Print Network [OSTI]

distributed. Usually, the prime objection to vibrations produced by machines is their effect on humans. These are high frequency vibrations that produce troublesome noise. Low frequency vibrations are often trans- mitted and these may damage nearby... materials used with fans, motors, engines, presses, turbines and similar machines. Byars (1)* studied vibrations of a circular plate on three supports for node patterns, amplitudes and frequencies. Ballentine (2) investigated the vibrations of circular...

Sheth, Prafulchandra Naginlal

1967-01-01T23:59:59.000Z

287

Syneresis and delayed detachment in agar plates  

E-Print Network [OSTI]

Biogels made of crosslinked polymers such as proteins or polysaccharides behave as porous soft solids and store large amount of solvent. These gels undergo spontaneous aging, called syneresis that consists in the shrinkage of the gel matrix and the progressive expulsion of the solvent, which eventually leads to the gel detachment from its container. Here we report on the syneresis phenomena in agar plates that consist in Petri dishes filled with a gel mainly composed of agar. Direct observations and speckle pattern correlation analyses allow us to rationalize the delayed detachment of the gel from the sidewall of the Petri dish. The detachment time $t^*$ is mainly controlled by the gel minimum thickness $e_{min}$ along the periphery of the plate: $t^*$ increases as a robust function of $e_{min}$ that neither depends on the age of the gel nor on any previous mass loss. Time-resolved correlation spectroscopy reveals that the speckle decorrelation rate increases a few hours before $t^*$ and that the gel detachment can be anticipated. This work provides quantitative observables to predict the shelf life of agar plates and highlights the key role of the competition between the syneresis and the gel adhesion to the wall in the detachment process.

Thibaut Divoux; Bosi Mao; Patrick Snabre

2014-10-30T23:59:59.000Z

288

Particle Transport in Parallel-Plate Reactors  

SciTech Connect (OSTI)

A major cause of semiconductor yield degradation is contaminant particles that deposit on wafers while they reside in processing tools during integrated circuit manufacturing. This report presents numerical models for assessing particle transport and deposition in a parallel-plate geometry characteristic of a wide range of single-wafer processing tools: uniform downward flow exiting a perforated-plate showerhead separated by a gap from a circular wafer resting on a parallel susceptor. Particles are assumed to originate either upstream of the showerhead or from a specified position between the plates. The physical mechanisms controlling particle deposition and transport (inertia, diffusion, fluid drag, and external forces) are reviewed, with an emphasis on conditions encountered in semiconductor process tools (i.e., sub-atmospheric pressures and submicron particles). Isothermal flow is assumed, although small temperature differences are allowed to drive particle thermophoresis. Numerical solutions of the flow field are presented which agree with an analytic, creeping-flow expression for Re < 4. Deposition is quantified by use of a particle collection efficiency, which is defined as the fraction of particles in the reactor that deposit on the wafer. Analytic expressions for collection efficiency are presented for the limiting case where external forces control deposition (i.e., neglecting particle diffusion and inertia). Deposition from simultaneous particle diffusion and external forces is analyzed by an Eulerian formulation; for creeping flow and particles released from a planar trap, the analysis yields an analytic, integral expression for particle deposition based on process and particle properties. Deposition from simultaneous particle inertia and external forces is analyzed by a Lagrangian formulation, which can describe inertia-enhanced deposition resulting from particle acceleration in the showerhead. An approximate analytic expression is derived for particle velocity at the showerhead exit as a function of showerhead geometry, flow rate, and gas and particle properties. The particle showerhead-exit velocity is next used as an initial condition for particle transport between the plates to determine whether the particle deposits on the wafer, as a function of shower-head-exit particle velocity, the plate separation, flow rate, and gas and particle properties. Based on the numerical analysis, recommendations of best practices are presented that should help tool operators and designers reduce particle deposition in real tools. These guidelines are not intended to replace detailed calculations, but to provide the user with a general feel for inherently-clean practices.

Rader, D.J.; Geller, A.S.

1999-08-01T23:59:59.000Z

289

Spatial homogenization for plate-type critical assemblies. [LMFBR  

SciTech Connect (OSTI)

Standard calculational models of plate-type LMFBR critical assemblies do not explicitly represent individual plates. Instead, detailed plate-by-plate calculations are performed only for each representative cell type, and homogenized cross sections are defined by flux-volume weighting of individual plate cross sections. Subsequent reactor calculations are performed by modeling each cell type with homogenized cross sections. The homogenized cross sections are sensitive to the manner in which the cell leakage is modeled. The intent of this paper is to present a method of representing the cell leakage which results in more accurate homogenized cross sections than the methods presently in use.

Rempe, K.R.; Smith, K.S.

1983-01-01T23:59:59.000Z

290

The great American garage  

E-Print Network [OSTI]

How does one explore the suburban home? Go in through the garage, of course. Sales, bands, suicides, and business startups: The suburban garage is the most culturally flexible space in the entire American domestic environment. ...

Miller, B. Alex (Brian Alex), 1977-

2004-01-01T23:59:59.000Z

291

Asian American women entrepreneurs  

E-Print Network [OSTI]

There are an estimated 620,300 firms owned by Asian American women nationwide, and they contribute $105 billion to the U.S. economy. They are also active in Greater Boston's innovation and entrepreneurship communities. ...

Suh, Clara J

2014-01-01T23:59:59.000Z

292

American Samoa- Net Metering  

Broader source: Energy.gov [DOE]

The American Samoa Power Authority (ASPA), a government-owned electric utility, is the only power provider in this U.S. territory of almost 70,000 people. ASPA's "Interconnection and Net Energy...

293

Casimir interaction energies for magneto-electric ?-function plates  

E-Print Network [OSTI]

We present boundary conditions for the electromagnetic fields on a \\delta-function plate, having both electric and magnetic properties, sandwiched between two magneto-electric semi-infinite half spaces. The optical properties for an isolated \\delta-function plate are shown to be independent of the longitudinal material properties of the plate. The Casimir-Polder energy between an isotropically polarizable atom and a magneto-electric \\delta-function plate is attractive for a purely electric \\delta-function plate, repulsive for a purely magnetic \\delta-function plate, and vanishes for the simultaneous perfect conductor limit of both electric and magnetic properties of the \\delta-function plate. The interaction energy between two identical \\delta-function plates is always attractive. It can be attractive or repulsive when the plates have electric and magnetic properties interchanged and reproduces Boyer's result for the interaction energy between perfectly conducting electric and magnetic plates. The change in the Casimir-Polder energy in the presence of a \\delta-function plate on a magneto-electric substrate is substantial when the substrate is a weak dielectric.

Kimball A. Milton; Prachi Parashar; Martin Schaden; K. V. Shajesh

2013-02-01T23:59:59.000Z

294

A novel plating process for microencapsulating metal hydrides  

SciTech Connect (OSTI)

One approach to increasing the lifetime of the metal hydride electrode has been the use of conventional electroless plating to produce a coating of copper or nickel on the surface of the metal hydride powders. In this paper, a novel method for microencapsulating the active electrode powders is presented. This new plating technique takes advantage of the reducing power of hydrogen already stored inside the metal hydride to plate a variety of metals onto metal hydride materials. This method greatly simplifies electroless plating for these powders, eliminating the need for stabilizers and additives typically required for conventional electroless plating solutions. Metals that can be electrolessly plated with stored hydrogen have been identified based on thermodynamic considerations. Experimentally, micrometers thick coatings of copper, silver, and nickel have been plated on several metal hydrides.

Law, H.H.; Vyas, B.; Zahurak, S.M.; Kammlott, G.W. [AT and T Bell Labs., Murray Hill, NJ (United States)

1996-08-01T23:59:59.000Z

295

Materials selection for the US INTOR divertor collector plate  

SciTech Connect (OSTI)

The divertor collector plate in the INTOR reactor will be subjected to high heat, particle, and neutron fluxes, making it the most severely damaged torus component. The collector plate is composed of a protection plate, which is directly exposed to the particle flux, and a heat sink which provides support for the protection plate and carries the water coolant. The high-Z refractory metals have been considered for use as the protection plate material, and austenitic stainless steels and copper alloys have been considered as the heat sink material. Tungsten and Type 316 stainless steels have been selected for the protection plate and heat sink, respectively. The protection plate has a sputtering lifetime of 1.75 y at a 50% duty factor, while the heat sink is expected to last the lifetime of the reactor.

Mattas, R.F.; Misra, B.; Smith, D.L.; Morgan, G.D.; Delaney, M.; Gold, R.

1981-01-01T23:59:59.000Z

296

Nuclear Power Plant Construction Support (North Carolina)  

Broader source: Energy.gov [DOE]

Language in the North Carolina Renewable Energy and Energy Efficiency Portfolio Standard allows a utility to have incurred costs reviewed by the North Carolina Utilities Commission (NCUC)...

297

Economic and Conservation Evaluation of Capital Renovation Projects: Hidalgo County Irrigation District No. 1 (Edinburg) - North Branch / East Main - Final  

E-Print Network [OSTI]

American Development Bank. The proposed project involves installing 4.83 miles of multi-size pipeline to replace a segment of the North Branch / East Main canal. Both nominal and real estimates of water and energy savings and expected economic and financial...

Rister, M. Edward; Lacewell, Ronald D.; Sturdivant, Allen W.; Robinson, John R.C.; Popp, Michael C.

298

Aspects of electroless nickel plating on molybdenum  

SciTech Connect (OSTI)

A process for depositing an adherent coating of an electroless nickel-phosphorus alloy on molybdenum was developed. The required pretreatment processes included an anodic etch in a chromic acid-nitric acid solution, an anodic etch in a phosphonic acid solution, and an oxide stripping step in a chromic acid-nitric acid solution. Initiation of the electroless nickel plating was accomplished through a series of strikes in the nickel bath. Scale up from laboratory parts to large components involved optimization of parameters such as pretreat time, current density, anode to cathode ratio and strike time.

Mikkola, R.D.; Daugherty, C.E.; Harris, G.E.; Neff, W.A.; Owens, W.W.

1984-07-01T23:59:59.000Z

299

Sampling Plan for Assaying Plates Containing Depleted or Normal Uranium  

SciTech Connect (OSTI)

This paper describes the rationale behind the proposed method for selecting a 'representative' sample of uranium metal plates, portions of which will be destructively assayed at the Y-12 Security Complex. The total inventory of plates is segregated into two populations, one for Material Type 10 (depleted uranium (DU)) and one for Material Type 81 (normal [or natural] uranium (NU)). The plates within each population are further stratified by common dimensions. A spreadsheet gives the collective mass of uranium element (and isotope for DU) and the piece count of all plates within each stratum. These data are summarized in Table 1. All plates are 100% uranium metal, and all but approximately 60% of the NU plates have Kel-F{reg_sign} coating. The book inventory gives an overall U-235 isotopic percentage of 0.22% for the DU plates, ranging from 0.19% to 0.22%. The U-235 ratio of the NU plates is assumed to be 0.71%. As shown in Table 1, the vast majority of the plates are comprised of depleted uranium, so most of the plates will be sampled from the DU population.

Ivan R. Thomas

2011-11-01T23:59:59.000Z

300

Common Pipeline Carriers (North Dakota)  

Broader source: Energy.gov [DOE]

Any entity that owns, operates, or manages a pipeline for the purpose of transporting crude petroleum, gas, coal, or carbon dioxide within or through the state of North Dakota, or is engaged in the...

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Waters; General Provisions (North Dakota)  

Broader source: Energy.gov [DOE]

The waters of North Dakota are understood as belonging to the public and may be appropriated for beneficial uses. However, the right to use water in large quantities must be acquired. Entities...

302

Yellowstone River Compact (North Dakota)  

Broader source: Energy.gov [DOE]

The Yellowstone River Compact, agreed to by the States of Montana, North Dakota, and Wyoming, provides for an equitable division and apportionment of the waters of the Yellowstone River, as well as...

303

Water Resource Districts (North Dakota)  

Broader source: Energy.gov [DOE]

Water Resource Districts are created throughout the state of North Dakota to manage, conserve, protect, develop, and control water resources. Each District will be governed by a Water Resource...

304

Elastocapillary coalescence of plates and pillars  

E-Print Network [OSTI]

When a fluid-immersed array of lamellae or filaments that is attached to a substrate is dried, evaporation leads to the formation of menisci on the tips of the plates or pillars that bring them together. Similarly, when hair dries it clumps together due to capillary forces induced by the liquid menisci between the flexible hairs. Building on prior experimental observations, we use a combination of theory and computation to understand the nature of this instability and its evolution in both the two-dimensional and three-dimensional setting of the problem. For the case of lamellae, we explicitly derive the interaction torques based on the relevant physical parameters. A Bloch-wave analysis for our periodic mechanical system captures the critical volume of the liquid and the 2-plate-collapse eigenmode at the onset of instability. We study the evolution of clusters and their arrest using numerical simulations to explain the hierarchical cluster formation and characterize the sensitive dependence of the final structures on the initial perturbations. We then generalize our analysis to treat the problem of pillar collapse in 3D, where the fluid domain is completely connected and the interface is a surface with the uniform mean curvature. Our theory and simulations capture the salient features of both previous experimental observations and our own in terms of the key parameters that can be used to control the kinetics of the process.

Zhiyan Wei; Tobias Schneider; Jungchul Kim; Ho-Young Kim; Joanna Aizenberg; L. Mahadevan

2014-08-04T23:59:59.000Z

305

C6 plate puncture testing report.  

SciTech Connect (OSTI)

There are numerous scenarios where critical systems could be subject to penetration by projectiles or fixed objects (e.g., collision, natural disaster, act of terrorism, etc.). It is desired to use computational models to examine these scenarios and make risk-informed decisions; however, modeling of material failure is an active area of research, and new models must be validated with experimental data. The purpose of this report is to document the experimental work performed from FY07 through FY08 on the Campaign Six Plate Puncture project. The goal of this project was to acquire experimental data on the puncture and penetration of metal plates for use in model validation. Of particular interest is the PLH failure model also known as the multilinear line segment model. A significant amount of data that will be useful for the verification and validation of computational models of ductile failure were collected during this project were collected and documented herein; however, much more work remains to be performed, collecting additional experimental data that will further the task of model verification.

Vangoethem, Douglas J.; Cordova, Theresa Elena; Reu, Phillip L.

2013-04-01T23:59:59.000Z

306

Catalytic bipolar interconnection plate for use in a fuel cell  

DOE Patents [OSTI]

A bipolar interconnection plate for use between adjacent fuel cell units in a stacked fuel cell assembly. Each plate is manufactured from an intermetallic composition, examples of which include NiAl or Ni.sub.3 Al which can catalyze steam reforming of hydrocarbons. Distributed within the intermetallic structure of the plate is a ceramic filler composition. The plate includes a first side with gas flow channels therein and a second side with fuel flow channels therein. A protective coating is applied to the first side, with exemplary coatings including strontium-doped or calcium-doped lanthanum chromite. To produce the plate, Ni and Al powders are combined with the filler composition, compressed at a pressure of about 10,000-30,000 psi, and heated to about 600.degree.-1000.degree. C. The coating is then applied to the first side of the completed plate using liquid injection plasma deposition or other deposition techniques.

Lessing, Paul A. (Idaho Falls, ID)

1996-01-01T23:59:59.000Z

307

Catalytic bipolar interconnection plate for use in a fuel cell  

DOE Patents [OSTI]

A bipolar interconnection plate is described for use between adjacent fuel cell units in a stacked fuel cell assembly. Each plate is manufactured from an intermetallic composition, examples of which include NiAl or Ni{sub 3}Al which can catalyze steam reforming of hydrocarbons. Distributed within the intermetallic structure of the plate is a ceramic filler composition. The plate includes a first side with gas flow channels therein and a second side with fuel flow channels therein. A protective coating is applied to the first side, with exemplary coatings including strontium-doped or calcium-doped lanthanum chromite. To produce the plate, Ni and Al powders are combined with the filler composition, compressed at a pressure of about 10,000--30,000 psi, and heated to about 600--1000 C. The coating is then applied to the first side of the completed plate using liquid injection plasma deposition or other deposition techniques. 6 figs.

Lessing, P.A.

1996-03-05T23:59:59.000Z

308

Behavior of plate trunnions subjected to shear loads  

SciTech Connect (OSTI)

The use of fabricated trunnions in heavy lift installation of offshore and marine structures is becoming widespread. This paper presents the results of a parametric study, with systematic variation of relevant geometric parameters, on the elasto-plastic responses of plate trunnions subjected to shear loads from the sling eyes. Two distinctive failure modes, associated with main plate dominated and shear plate/trunnion pipe dominated responses are identified and the corresponding results summarized. A proportional limit load, P{sub yl}, is defined for each specimen based on its load-displacement response. It is observed that a plate trunnion possesses significant reserve strength beyond its limit load and that current industry practice, which considers the shear plate only to transfer the total sling load into the main plate, is overly conservative.

Choo, Y.S.; Padmanaban, K.; Shanmugam, N.E.; Liew, J.Y.R. [National Univ. of Singapore (Singapore). Faculty of Engineering

1995-12-31T23:59:59.000Z

309

Andrew Case "American Environmental History"  

E-Print Network [OSTI]

Andrew Case History "American Environmental History" Spring 2008 Advisor: William Cronon Classics, Richard. "It's Your Misfortune and None of My Own": A New History of the American West. (Norman

Wisconsin at Madison, University of

310

GEOPHYSICAL RESEARCH LETTERS, VOL. 0, NO. 0, PAGES 0-0, M 0, 2001 A new estimate for present-day Cocos-Caribbean  

E-Print Network [OSTI]

-day Cocos-Caribbean plate motion: Implications for slip along the Central American volcanic arc Charles De continuously-operating GPS sites on the Caribbean, North American, and Pacific plates are combined with 61 a new estimate of present-day Cocos-Caribbean plate motion. A comparison of the predicted Cocos-Caribbean

DeMets, Chuck

311

Tests of a Novel Design of Resistive Plate Chambers  

E-Print Network [OSTI]

A novel design of Resistive Plate Chambers (RPCs), using only a single resistive plate, is being proposed. Based on this design, two large size prototype chambers were constructed and were tested with cosmic rays and in particle beams. The tests confirmed the viability of this new approach. In addition to showing an improved single-particle response compared to the traditional 2-plate design, the novel chambers also prove to be suitable for calorimetric applications.

Bilki, B; Freund, B; Neubser, C; Onel, Y; Repond, J; Schlereth, J; Xia, L

2015-01-01T23:59:59.000Z

312

Investigation of metallic bipolar plates for PEM fuel cells.  

E-Print Network [OSTI]

?? High cost and a short lifetime are the two main reasons why the PEM fuel cell is yet to be commercialized. The bipolar plate (more)

Ldre, Sigrid

2011-01-01T23:59:59.000Z

313

The StarScan plate measuring machine: overview and calibrations  

E-Print Network [OSTI]

The StarScan machine at the U.S. Naval Observatory (USNO) completed measuring photographic astrograph plates to allow determination of proper motions for the USNO CCD Astrograph Catalog (UCAC) program. All applicable 1940 AGK2 plates, about 2200 Hamburg Zone Astrograph plates, 900 Black Birch (USNO Twin Astrograph) plates, and 300 Lick Astrograph plates have been measured. StarScan comprises of a CCD camera, telecentric lens, air-bearing granite table, stepper motor screws, and Heidenhain scales to operate in a step-stare mode. The repeatability of StarScan measures is about 0.2 micrometer. The CCD mapping as well as the global table coordinate system has been calibrated using a special dot calibration plate and the overall accuracy of StarScan x,y data is derived to be 0.5 micrometer. Application to real photographic plate data shows that position information of at least 0.65 micrometer accuracy can be extracted from course grain 103a-type emulsion astrometric plates. Transformations between "direct" and "reverse" measures of fine grain emulsion plate measures are obtained on the 0.3 micrometer level per well exposed stellar image and coordinate, which is at the limit of the StarScan machine.

Norbert Zacharias; Lars Winter; Ellis Holdenried; Jean-Pierre de Cuyper; Ted Rafferty; Gary Wycoff

2008-06-02T23:59:59.000Z

314

Latin American and Caribbean Studies  

E-Print Network [OSTI]

Latin American and Caribbean Studies Certificate About Us UWM graduates in the 21st century American and Caribbean Studies Certificate Program (LACS) will be especially well-prepared for careers academic focus in Latin American and Caribbean languages, histories, and cultures. However, the LACS

Saldin, Dilano

315

Perspective on plating for precision finishing  

SciTech Connect (OSTI)

This paper is intended as an overview on platings for precision finishing operations. After a brief review of the two processes (polishing and precision machining) by which a coating on a part can be converted to a precision surface, the coatings which work successfully in these applications will be discussed. Then adhesion and stress aspects of deposits will be covered. Electroless nickel, which is a particularly attractive coating for precision finishing applications, will be discussed in some detail, from its early years as the Kanigen'' process to the present. Since microstructural changes in deposits are important for precision parts, this aspect will be covered for electroless nickel, copper and silver deposits. Lastly, some words will be directed at potential future electrodeposited coatings including nickel-phosphorus alloys, and various silver alloys. 41 refs., 16 figs., 1 tab.

Dini, J.W.

1991-04-01T23:59:59.000Z

316

American Disabilities Act  

Broader source: Energy.gov [DOE]

The Americans with Disabilities Act prohibits private employers, state and local governments, employment agencies and labor unions from discriminating against qualified individuals with disabilities in job application procedures, hiring, firing, advancement, compensation, job training, and other terms, conditions, and privileges of employment.

317

Geothermal Casimir phenomena for the sphere-plate and cylinder-plate configurations  

E-Print Network [OSTI]

We investigate the nontrivial interplay between geometry and temperature in the Casimir effect for the sphere-plate and cylinder-plate configurations. At low temperature, the thermal contribution to the Casimir force is dominated by this interplay, implying that standard approximation techniques such as the PFA are inapplicable even in the limit of small surface separation. Thermal fluctuations on scales of the thermal wavelength lead to a delocalization of the thermal force density at low temperatures. As a consequence, the temperature dependence strongly differs from naive expectations. Most prominently, thermal forces can develop non-monotonic behavior below a critical temperature. We perform a comprehensive study of such geothermal phenomena in these Casimir geometries, using analytical and numerical worldline techniques for Dirichlet scalar fluctuations.

Alexej Weber; Holger Gies

2010-03-17T23:59:59.000Z

318

Geothermal Casimir phenomena for the sphere-plate and cylinder-plate configurations  

E-Print Network [OSTI]

We investigate the nontrivial interplay between geometry and temperature in the Casimir effect for the sphere-plate and cylinder-plate configurations. At low temperature, the thermal contribution to the Casimir force is dominated by this interplay, implying that standard approximation techniques such as the PFA are inapplicable even in the limit of small surface separation. Thermal fluctuations on scales of the thermal wavelength lead to a delocalization of the thermal force density at low temperatures. As a consequence, the temperature dependence strongly differs from naive expectations. Most prominently, thermal forces can develop non-monotonic behavior below a critical temperature. We perform a comprehensive study of such geothermal phenomena in these Casimir geometries, using analytical and numerical worldline techniques for Dirichlet scalar fluctuations.

Weber, Alexej

2010-01-01T23:59:59.000Z

319

Vacuum fusion bonded glass plates having microstructures thereon  

DOE Patents [OSTI]

An improved apparatus and method for vacuum fusion bonding of large, patterned glass plates. One or both glass plates are patterned with etched features such as microstructure capillaries and a vacuum pumpout moat, with one plate having at least one hole therethrough for communication with a vacuum pumpout fixture. High accuracy alignment of the plates is accomplished by a temporary clamping fixture until the start of the fusion bonding heat cycle. A complete, void-free fusion bond of seamless, full-strength quality is obtained through the plates; because the glass is heated well into its softening point and because of a large, distributed force that is developed that presses the two plates together from the difference in pressure between the furnace ambient (high pressure) and the channeling and microstructures in the plates (low pressure) due to the vacuum drawn. The apparatus and method may be used to fabricate microcapillary arrays for chemical electrophoresis; for example, any apparatus using a network of microfluidic channels embedded between plates of glass or similar moderate melting point substrates with a gradual softening point curve, or for assembly of glass-based substrates onto larger substrates, such as in flat panel display systems.

Swierkowski, Steve P. (Livermore, CA); Davidson, James C. (Livermore, CA); Balch, Joseph W. (Livermore, CA)

2001-01-01T23:59:59.000Z

320

Heterogeneous cavitation in liquid helium 4 near a glass plate  

E-Print Network [OSTI]

Heterogeneous cavitation in liquid helium 4 near a glass plate X. Chavanne, S. Balibar and F wave to study cavitation, i.e. the nucleation of bubbles, in liquid helium 4 near a clean glass plate and threshold pressures in the range 0 to -3 bar, significantly less negative than for homogeneous cavitation

Caupin, Frédéric

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Impact of graphene coating on the atom-plate interaction  

E-Print Network [OSTI]

Using the recently proposed quantum electrodynamical formalism, we calculate the Casimir-Polder free energies and forces between the ground state atoms of Rb, Na, Cs and He${}^{\\ast}$ and the plates made of Au, Si, sapphire and fused silica coated with a graphene sheet. It is shown that the graphene coating has no effect on the Casimir-Polder interaction for metallic plates, but influences significantly for plates made of dielectric materials. The influence of graphene coating increases with decreasing static dielectric permittivity of the plate material and the characteristic frequency of an atomic dynamic polarizability. Simple analytic expressions for the classical limit of the Casimir-Polder free energy and force between an atom and a graphene-coated plate are obtained. From the comparison with the results of numerical computations, the application region of these expressions is determined.

G. L. Klimchitskaya; V. M. Mostepanenko

2014-06-23T23:59:59.000Z

322

North South Forum Boniface Kiteme  

E-Print Network [OSTI]

: Overview and Introduction #12;Graph created from the data in the BP 2006 statistical review 4. Increasing (higher) energy consumption and prices I: Overview and Introduction #12;5. Climate change I: Overview: Basically and largely sectoral Greatly north driven through funding arrangements 4. The Reality Tertiary

Richner, Heinz

323

South Dakota North Platte R.  

E-Print Network [OSTI]

1 KILOMETER 1 MILE Scotts Bluff County Tri-St ate Canal Mitchell Canal North Platte River Enterprise-nest identification WYOMING 6I 2D 7H 8F 7A Wyoming Niobrara R. Sioux County Figure 1. Location of study area. Use

324

North Dakota's Forests Resource Bulletin  

E-Print Network [OSTI]

opportunity provider and employer. #12;David E. Haugen, Robert Harsel, Aaron Bergdahl, Tom Claeys, Christopher, Charles J. Barnett, Grant M. Domke, Dan Kaisershot, W. Keith Moser, Andrew J. Lister, and Dale D and fire management team leader with the North Dakota Forest Service, Bismarck, ND. Christopher W. Woodall

325

Contributions to the knowledge of the ecology of the American woodcock, Philohela minor (Gmelin), on the wintering range in Louisiana  

E-Print Network [OSTI]

ABSTRACT............................................ x INTRODUCTION........................................... 1 SYSTEMATIC CLASSIFICATION AND RANGE OF THE AMERICAN WOODCOCK................................ 5 Range in North America... Precipitation (inches) in Louisiana . . ? . ? .......... . ............13 4 Physiographic Provinces of Louisiana. . . . . . 1$ 5 Soils of Louisiana.............................18 6 Forest Types of Louisiana .................... 21 7 Nocturnal Feeding...

Glasgow, Leslie Lloyd

1958-01-01T23:59:59.000Z

326

Zone Choices NorthFairwayRd.  

E-Print Network [OSTI]

.Valley Rd. Illinois St. To Palouse, Hwy. 27 North Fairway Rd. Valley Rd. Basketball Courts To WSU Visitor

Collins, Gary S.

327

Seismic tomography constraints on reconstructing the Philippine Sea Plate and its margin  

E-Print Network [OSTI]

The Philippine Sea Plate has been surrounded by subduction zones throughout Cenozoic time due to the convergence of the Eurasian, Pacific and Indian-Australian plates. Existing Philippine Sea Plate reconstructions have been made based primarily...

Handayani, Lina

2005-02-17T23:59:59.000Z

328

Effect of polyurea on dynamic response and fracture resistance of steel plates under impulsive loads  

E-Print Network [OSTI]

on the dynamic response of steel plates, 2006 SEM AnnualPenetration protection of steel plates with polyurea layer,the post-failure motion of steel plates subjected to blast

Amini, Mahmoud Reza

2007-01-01T23:59:59.000Z

329

Seafloor geodetic measurements and modeling of Nazca-South America plate convergence  

E-Print Network [OSTI]

3. Nazca-South America plate convergence . II GPS-acousticIII.2: Nazca-South America plate convergenceDecelerat- ing Naza-South America and Nazca-Pac?c plate

Gagnon, Katie L.

2007-01-01T23:59:59.000Z

330

Perforated plates for cryogenic regenerators and method of fabrication  

DOE Patents [OSTI]

Perforated plates (10) having very small holes (14) with a uniform diameter throughout the plate thickness are prepared by a "wire drawing" process in which a billet of sacrificial metal is disposed in an extrusion can of the plate metal, and the can is extruded and restacked repeatedly, converting the billet to a wire of the desired hole diameter. At final size, the rod is then sliced into wafers, and the wires are removed by selective etching. This process is useful for plate metals of interest for high performance regenerator applications, in particular, copper, niobium, molybdenum, erbium, and other rare earth metals. Er.sub.3 Ni, which has uniquely favorable thermophysical properties for such applications, may be incorporated in regions of the plates by providing extrusion cans (20) containing erbium and nickel metals in a stacked array (53) with extrusion cans of the plate metal, which may be copper. The array is heated to convert the erbium and nickel metals to Er.sub.3 Ni. Perforated plates having two sizes of perforations (38, 42), one of which is small enough for storage of helium, are also disclosed.

Hendricks, John B. (Huntsville, AL)

1994-01-01T23:59:59.000Z

331

Regenerate metal-plating baths to cut waste and save  

SciTech Connect (OSTI)

During electrode-based metal plating of equipment components, the formation of an electrical field causes metal deposits to be thicker at edges and seams, and thinner on flat surfaces. And, electrode-based methods consume large amounts of energy. Electroless-nickel (EN) -- or autocatalytic -- plating systems were pioneered in the 1940s to solve these problems. EN plating produces a more uniform coating, irrespective of the complexity of the part, and it consumes less electricity, since to electric current is required during plating. Plating in an EN system results from a chemical reaction between nickel in the bath and the substrate of the equipment component. The downside of electroless plating, however, is the limited life of the nickel bath, and the large volume of metal waste produced by bath disposal. Ionsep Corp. (Wilmington, Del.) has developed an electrodialytic system that continuously reforms the EN plating baths, to give them longer life. Its patented system has been successfully laboratory tested in a 1-ft{sup 2} cell, and the firm recently won a $250,000 grant from the US Dept. of Energy (Washington, D.C.) and Environmental Protection Agency (Washington, D.C.), to design and engineer a commercial-scale version of the system.

NONE

1995-03-01T23:59:59.000Z

332

Large-Area Zone Plate Fabrication with Optical Lithography  

SciTech Connect (OSTI)

Zone plates as condenser optics for x-ray microscopes offer simple optical designs for both illumination and spectral resolution when used as a linear monochromator. However, due to the long write times for electron beam lithography, both the availability and the size of zone plates for condensers have been limited. Since the resolution provided by the linear monochromator scales almost linearly with the diameter of the zone plate, the full potential for zone plate monochromators as illumination systems for x-ray microscopes has not been achieved. For example, the 10-mm-diameter zone plate has demonstrated a spectral resolution of E/{Delta}E = 700[1], but with a 26-mm-diameter zone plate, the calculated spectral resolution is higher than E/{Delta}E = 3000. These large-area zone plates are possible to fabricate with the leading edge semiconductor lithography tools such as those available at the College of Nanoscale Science and Engineering at the University at Albany. One of the lithography tools available is the ASML TWINSCAN XT: 1950i with 37-nm resolution [2]. A single 300-mm wafer can contain more than 60 fields, each with a large area condenser, and the throughput of the tool can be more than one wafer every minute.

Denbeaux, G. [College of Nanoscale Science and Engineering, University at Albany, 255 Fuller Road, Albany, NY 12203 (United States)

2011-09-09T23:59:59.000Z

333

Perforated plates for cryogenic regenerators and method of fabrication  

DOE Patents [OSTI]

Perforated plates having very small holes with a uniform diameter throughout the plate thickness are prepared by a [open quotes]wire drawing[close quotes] process in which a billet of sacrificial metal is disposed in an extrusion can of the plate metal, and the can is extruded and restacked repeatedly, converting the billet to a wire of the desired hole diameter. At final size, the rod is then sliced into wafers, and the wires are removed by selective etching. This process is useful for plate metals of interest for high performance regenerator applications, in particular, copper, niobium, molybdenum, erbium, and other rare earth metals. Er[sub 3]Ni, which has uniquely favorable thermophysical properties for such applications, may be incorporated in regions of the plates by providing extrusion cans containing erbium and nickel metals in a stacked array with extrusion cans of the plate metal, which may be copper. The array is heated to convert the erbium and nickel metals to Er[sub 3]Ni. Perforated plates having two sizes of perforations, one of which is small enough for storage of helium, are also disclosed. 10 figures.

Hendricks, J.B.

1994-03-29T23:59:59.000Z

334

Conductivity fuel cell collector plate and method of fabrication  

DOE Patents [OSTI]

An improved method of manufacturing a PEM fuel cell collector plate is disclosed. During molding a highly conductive polymer composite is formed having a relatively high polymer concentration along its external surfaces. After molding the polymer rich layer is removed from the land areas by machining, grinding or similar process. This layer removal results in increased overall conductivity of the molded collector plate. The polymer rich surface remains in the collector plate channels, providing increased mechanical strength and other benefits to the channels. The improved method also permits greater mold cavity thickness providing a number of advantages during the molding process.

Braun, James C. (Juno Beach, FL)

2002-01-01T23:59:59.000Z

335

New American Home 2009 (Brochure)  

SciTech Connect (OSTI)

This brochure details the New American Home 2009, which demonstrates the use of innovative building materials, cutting-edge design, and the latest construction techniques.

Not Available

2008-12-01T23:59:59.000Z

336

Oxidation studies of CrAlON nanolayered coatings on steel plates...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

coatings on steel plates. Abstract: The requirements of low cost and high-temperature corrosion resistance for bipolar interconnect plates in solid oxide fuel cell stacks have...

337

E-Print Network 3.0 - aluminum plate spent Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Diode Laser 77 Top View Side View Aluminum damping plate Aluminum base plate Thermoelectric cooler... was attached to an ... Source: Steck, Daniel A. - Oregon Center for...

338

JOURNAL OF GEOPHYSICAL RESEARCH, VOL. 102, NO. D24, PAGES 29,737-29,745, DECEMBER 26, 1997 Atmospheric aerosol and water vapor characteristics over north  

E-Print Network [OSTI]

Atmospheric aerosol and water vapor characteristics over north central Canada during BOREAS B. L. Markham, J typically0.09 and 0.34 cm, respectively.Size distributionsderivedfrom solar almucantarmeasurementsshowtheHughesSTXCorporation,Greenbelt,Maryland. 2Formerlyat HSTX/GSFC-NASA,Greenbelt,Maryland. Copyright1997by the American

339

Method for regeneration of electroless nickel plating solution  

SciTech Connect (OSTI)

An electroless nickel(EN)/hypophosphite plating bath is provided employing acetic acid/acetate as a buffer and which is, as a result, capable of perpetual regeneration while avoiding the production of hazardous waste. A regeneration process is provided to process the spent EN plating bath solution. A concentrated starter and replenishment solution is provided for ease of operation of the plating bath. The regeneration process employs a chelating ion exchange system to remove nickel cations from spent EN plating solution. Phosphites are then removed from the solution by precipitation. The nickel cations are removed from the ion exchange system by elution with hypophosphorous acid and the nickel concentration of the eluate adjusted by addition of nickel salt. The treated solution and adjusted eluate are combined, stabilizer added, and the volume of resulting solution reduced by evaporation to form the bath starter and replenishing solution.

Eisenmann, Erhard T. (5423 Vista Sandia, NE., Albuquerque, NM 87111)

1997-01-01T23:59:59.000Z

340

Method for regeneration of electroless nickel plating solution  

SciTech Connect (OSTI)

An electroless nickel(EN)/hypophosphite plating bath is provided employing acetic acid/acetate as a buffer and which is, as a result, capable of perpetual regeneration while avoiding the production of hazardous waste. A regeneration process is provided to process the spent EN plating bath solution. A concentrated starter and replenishment solution is provided for ease of operation of the plating bath. The regeneration process employs a chelating ion exchange system to remove nickel cations from spent EN plating solution. Phosphites are then removed from the solution by precipitation. The nickel cations are removed from the ion exchange system by elution with hypophosphorus acid and the nickel concentration of the eluate adjusted by addition of nickel salt. The treated solution and adjusted eluate are combined, stabilizer added, and the volume of resulting solution reduced by evaporation to form the bath starter and replenishing solution. 1 fig.

Eisenmann, E.T.

1997-03-11T23:59:59.000Z

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Next Generation Bipolar Plates for Automotive PEM Fuel Cells  

Broader source: Energy.gov (indexed) [DOE]

Bipolar Plates for Automotive PEM Fuel Cells (Topic 4) GrafTech International, Ltd. * Funding DOE Cost Share Recipient Cost Share TOTAL 2,325,943 581,486 2,907,429 80% 20% 100%...

342

Melt generation in the Earth's mantle at Convergent Plate Margins  

E-Print Network [OSTI]

The five geologic studies presented in this thesis document how the recycling of tectonic plates at subduction zones has a profound effect on the melting behavior of the Earth's mantle. Two experimental studies (Chapters ...

Till, Christy B

2011-01-01T23:59:59.000Z

343

Using Plate Heat Exchangers to Increase Energy Efficiency  

E-Print Network [OSTI]

"In recent years, there has been an increasing awareness of Plate Heat Exchangers (PHE's) in industrial processes around the world. While PHE's have historically been classified as compact heat exchangers, compactness is often a secondary advantage...

Bailey, K.

344

Determination of plate efficiencies for conventional distillation columns  

E-Print Network [OSTI]

DETERMINATION OF PLATE EFFICIENCIES FOR CONVENTIONAL DISTILLATION COIUMNS A Thesis By Thomas Raymond Harris Submitted to the Graduate School of the Agricultural and Mechanical College of Texas in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE May 1962 Ma)or Sub)ect t Chemical Engineering DETERMINATION OF PLATE EFFICIENCIES FOR CONVENTIONAL DISTILLATION COLUMNS A Thesis Thomas Raymond Harris Approred as to style and content bye Chairman of ommittee Head...

Harris, Thomas Raymond

2012-06-07T23:59:59.000Z

345

Dynamic optimization of a plate reactor start-up  

E-Print Network [OSTI]

Dynamic optimization of a plate reactor start-up Staffan Haugwitz, Per Hagander and John Bagterp Jørgensen Lund-Lyngby-?lborg-dagen 061101 Staffan Haugwitz et al Control of a plate reactor #12;Process configurations : 2 inj. / 1 cool zone T T T T T T T T T T Reactor outletReactant A Reactant B Cooling water uB1 u

346

The American Recovery  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of Energy StrainClientDesignOfficeThe 21st Century TruckAPRILAuditAmerican

347

AMERICAN STATISTICAL ASSOCIATION  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:SeadovCooperativeA2. World9, 2014 International PetroleumFuel Oil UsageAEP AMERICAN

348

AMERICAN STATISTICAL ASSOCIATION  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:SeadovCooperativeA2. World9, 2014 International PetroleumFuel Oil UsageAEP AMERICAN OPEN

349

AMERICAN STATISTICAL ASSOCIATION  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:SeadovCooperativeA2. World9, 2014 International PetroleumFuel Oil UsageAEP AMERICAN OPEN

350

AMERICAN STATISTICAL ASSOCIATION (ASA)  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:SeadovCooperativeA2.Reformulated, Average RefinerEnergy Supply Crude2.3AMERICAN

351

American Physical Society Fellows  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone by E-mail Share AlternativeRightAlvaroX-ray,American Physical

352

Lienert named American Welding Society Fellow  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

American Welding Society Fellow November 29, 2012 Thomas J. Lienert of the Lab's Metallurgy group was inducted into the American Welding Society's 2012 Class of Fellows during...

353

Energy Innovation: Green Button Initiative Empowering Americans...  

Office of Environmental Management (EM)

Innovation: Green Button Initiative Empowering Americans to Save Energy and Money Energy Innovation: Green Button Initiative Empowering Americans to Save Energy and Money February...

354

Aperture-based antihydrogen gravity experiment: Parallel plate geometry  

SciTech Connect (OSTI)

An analytical model and a Monte Carlo simulation are presented of an experiment that could be used to determine the direction of the acceleration of antihydrogen due to gravity. The experiment would rely on methods developed by existing antihydrogen research collaborations. The configuration consists of two circular, parallel plates that have an axis of symmetry directed away from the center of the earth. The plates are separated by a small vertical distance, and include one or more pairs of circular barriers that protrude from the upper and lower plates, thereby forming an aperture between the plates. Antihydrogen annihilations that occur just beyond each barrier, within a shadow region, are asymmetric on the upper plate relative to the lower plate. The probability for such annihilations is determined for a point, line and spheroidal source of antihydrogen. The production of 100,000 antiatoms is predicted to be necessary for the aperture-based experiment to indicate the direction of free fall acceleration of antimatter, provided that antihydrogen is produced within a sufficiently small antiproton plasma at a temperature of 4 K.

Rocha, J. R.; Hedlof, R. M.; Ordonez, C. A. [Department of Physics, University of North Texas, Denton, Texas 76203 (United States)] [Department of Physics, University of North Texas, Denton, Texas 76203 (United States)

2013-10-15T23:59:59.000Z

355

Factors affecting expanded electricity trade in North America  

SciTech Connect (OSTI)

The authors explore factors that affect electricity trade between enterprises in the US and Canada and the US and Mexico. They look to those underlying policy and institutional factors that affect the relative costs of producing electricity in the three countries. In particular, they consider six factors that appear to have a significant impact on electricity trade in North America: differences in the types of economic regulation of power leading to differences in cost recovery for wholesale and retail power and wheeling charges; changing regulatory attitudes, placing more emphasis on demand-side management and environmental concerns; differences in energy and economic policies; differences in national and subnational environmental policies; changing organization of electric power industries which may foster uncertainty, change historical relationships, and provide other potentially important sources of power for distribution utilities; and differences in the ability of enterprises to gain access to electric power markets because of restrictions placed on transmission access. In Section 2, the authors discuss the regulation of electricity trade in North America and provide an overview of the recent trading experience for electricity between Canada and the US and between Mexico and the US, including the volume of that trade over the past decade and existing transmission capacity between regions of the three countries. In Section 3, they look at the benefits that accrue to trading counties and what those benefits are likely to be for the three countries. The discussion in Section 4 centers on the relevant provisions of the Canada Free Trade Agreement and the proposed North American Free Trade Agreement. In Section 5, they set the stage for the discussion of policy and institutional differences presented in Section 6 by outlining differences in the organization of the electric power sectors of Canada, the US, and Mexico. The study is synthesized in Section 7.

Hill, L.J.

1994-01-01T23:59:59.000Z

356

Highly conductive, multi-layer composite precursor composition to fuel cell flow field plate or bipolar plate  

DOE Patents [OSTI]

This invention provides a moldable, multiple-layer composite composition, which is a precursor to an electrically conductive composite flow field plate or bipolar plate. In one preferred embodiment, the composition comprises a plurality of conductive sheets and a plurality of mixture layers of a curable resin and conductive fillers, wherein (A) each conductive sheet is attached to at least one resin-filler mixture layer; (B) at least one of the conductive sheets comprises flexible graphite; and (C) at least one resin-filler mixture layer comprises a thermosetting resin and conductive fillers with the fillers being present in a sufficient quantity to render the resulting flow field plate or bipolar plate electrically conductive with a conductivity no less than 100 S/cm and thickness-direction areal conductivity no less than 200 S/cm.sup.2.

Jang, Bor Z. (Centerville, OH); Zhamu, Aruna (Centerville, OH); Guo, Jiusheng (Centerville, OH)

2011-02-15T23:59:59.000Z

357

North River, North Dakota: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoading map...(Utility Company) JumpNorth Haven, Maine:Ohio:Pole, Alaska:6.9507977°,

358

North Central Elec Coop, Inc (North Dakota) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Powerstories onFocus AreaDataBusPFAN) | OpenIncNobleNorris ElectricNorthP

359

"American manufacturers are a cornerstone of the American economy and embody the best in American values. They enhance U.S. competitiveness  

E-Print Network [OSTI]

"American manufacturers are a cornerstone of the American economy and embody the best in American...................................................................... 27 Phase Four: Testing and Refinement ........................................................ 27

360

An elastic plate model for interseismic deformation in subduction Ravi V. S. Kanda1  

E-Print Network [OSTI]

the subducting and overriding plates, as well as zero net steady state vertical offset between the two plates, 1983]. The BSM accomplishes this zero net strain in the overriding plate by parameterizing interseismic case of zero plate thickness, thereby providing an alternative motivation for the BSM. The ESPM also

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Ultrasonic measurement of the residual stresses in patch welded steel plates  

E-Print Network [OSTI]

, structural steel plates. The two 1.2 in (48 in.) square plates were patch welded in the center to create a residual stress field; and subsequently, one of the plates was stress relieved. The LCR travel-time measurements on the plates not only differentiated...

Junghans, Paul Gerard

1994-01-01T23:59:59.000Z

362

Apparatus for tensile testing plate-type ceramic specimens  

DOE Patents [OSTI]

Apparatus is described for gripping a plate-type tensile specimen having generally T-shaped end regions in a dynamic tension fatigue testing apparatus comprising an annular housing having an open-ended elongated cavity therein, a plurality of hydraulic piston means supported by the housing in a spaced array about the cavity, and a specimen-supporting plate means overlying the piston means at one end of the elongated cavity and displaceable by said piston means in a longitudinal direction with respect to the longitudinal axis of the cavity, said apparatus for gripping a flat plate-type tensile specimen comprising: a pair of elongated pull rods each having oppositely disposed first and second end regions; a pair of mounting means carried by said plate means with each mounting means for pivotally attaching the first end region of each of said pull rods in a central region of said plate means for supporting said pair of elongated pull rods in a side-by-side relationship along a common longitudinal centerline within said cavity; recess means in the second end region of each of said pull rods in adjacently disposed surface regions thereof with said recess means facing one another and each adapted to receive one side of one of the generally T-shaped end regions of the plate-type tensile specimen; and load-bearing means positionable in each of said recess means and adapted to bear against a shoulder on each side of the generally T-shaped end region of the plate-type tensile specimen when a tensile loading is applied thereon.

Liu, K.C.

1993-08-24T23:59:59.000Z

363

Energy Conservation in China North Industries Corporation  

E-Print Network [OSTI]

ENERGY CONSERVATION IN CHINA NORTH INDUSTRIES CORPORATION Wang Tian You, Chen Hua De, Jing Xing Chu, Ling Rui Fu, China North Industries Corporation Beijing, People's Republic of China ABSTRACT This paper describes an overview of the energy... conservation in China North Industries Corporation. It shows how the corporation improves energy effi ciencies and how it changes constitution of fuel-- converting oil consumption to coal. Energy management organization, energy balance in plants...

You, W. T.; De, C. H.; Chu, J. X.; Fu, L. R.

364

North Valley Geothermal Project | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoading map...(Utility Company) JumpNorth Haven, Maine:Ohio:Pole,NorthNorth Valley Geothermal

365

Professor, Communication Studies and African American Studies  

E-Print Network [OSTI]

Professor, Communication Studies and African American Studies Director of African American of Communication and Theatre Arts and Director of the African American Studies Program at the University of Puget Book Chapter Award from the African American Communication and Culture Division and the Black Caucus

Miami, University of

366

First Floor Smithsonian American Art Museum  

E-Print Network [OSTI]

First Floor Smithsonian American Art Museum American Experience Folk Art Special ExhibitionsMillan Education Center Folk Art One Life Archives of American Art Gallery Recent AcquisitionsMuseum Store Museum Museum Graphic Arts American Art through 1940 America's Presidents The Struggle for Justice

Mathis, Wayne N.

367

Surface Water and Wetland Standards (North Carolina)  

Broader source: Energy.gov [DOE]

These rules state the standards for classification of water supply. Each stream in North Carolina has a classification based upon its designated uses. These rules provide the Environmental...

368

Molecular Biology Building North Lobby Entrance  

E-Print Network [OSTI]

Facilities MBB 1.420 and 1.426 Cryostat North Refrigerators/Freezers Sample Drop off Light Scopes(1) Night

Ben-Yakar, Adela

369

North Shore Gas- Residential Rebate Program  

Broader source: Energy.gov [DOE]

'''Contact North Shore Gas for information on limited-time bonus incentive offerings. Bonus incentives of $250 - $450 are available for eligible purchases made before May 31, 2013.'''

370

Choosing suppliers in North-West Russia.  

E-Print Network [OSTI]

??The purpose of the study was to determine how to choose suppliers in North-West Russia. The aim was to find out whether textbook theories of (more)

Malaki, Mirva

2013-01-01T23:59:59.000Z

371

Low Cost PEM Fuel Cell Metal Bipolar Plates  

SciTech Connect (OSTI)

Bipolar plate is an important component in fuel cell stacks and accounts for more than 75% of stack weight and volume. The technology development of metal bipolar plates can effectively reduce the fuel cells stack weight and volume over 50%. The challenge is the metal plate corrosion protection at low cost for the broad commercial applications. This project is aimed to develop innovative technological solutions to overcome the corrosion barrier of low cost metal plates. The feasibility of has been demonstrated and patented (US Patent 7,309,540). The plan is to further reduce the cost, and scale up the technology. The project is built on three pillars: 1) robust experimental evidence demonstrating the feasibility of our technology, 2) a team that consists of industrial leaders in fuel cell stack application, design, and manufactures; 3) a low-risk, significant-milestone driven program that proves the feasibility of meeting program objectives The implementation of this project will reduce the fuel cell stack metal bipolar separator plate cost which accounts 15-21% of the overall stack cost. It will contribute to the market adoption of fuel cell technologies. In addition, this corrosion protection technology can be used similar energy devices, such as batteries and electrolyzers. Therefore, the success of the project will be benefit in broad markets.

Wang, Conghua [TreadStone Technologies, Inc.

2013-05-30T23:59:59.000Z

372

Results of irradiated cladding tests and clad plate experiments  

SciTech Connect (OSTI)

Two aspects critical to the fracture behavior of three-wire stainless steel cladding were investigated by the Heavy-Section Steel Technology (HSST) Program: (1) radiation effects on cladding strength and toughness, and (2) the response of mechanically loaded, flawed structures in the presence of cladding (clad plate experiments). Postirradiation testing results show that, in the test temperature range from /minus/125 to 288/degree/C, the yield strength increased, and ductility insignificantly increased, while there was almost no change in ultimate tensile strength. All cladding exhibited ductile-to-brittle transition behavior during Charpy impact testing. Radiation damage decreased the Charpy upper-shelf energy by 15 to 20% and resulted in up to 28/degree/C shifts of the Charpy impact transition temperature. Results of irradiated 12.5-mm-thick compact specimens (0.5TCS) show consistent decreases in the ductile fracture toughness, J/sub Ic/, and the tearing modulus. Results from clad plate tests have shown that (1) a tough surface layer composed of cladding and/or heat-affected zone has arrested running flaws under conditions where unclad plates have ruptured, and (2) the residual load-bearing capacity of clad plates with large subclad flaws significantly exceeded that of an unclad plate. 13 figs., 1 tab.

Haggag, F.M.; Iskander, S.K.

1988-01-01T23:59:59.000Z

373

American Ornithologists' Union. 1983. Check-list of North American birds. 6th ed. Lawrence, KS: Allen Press; 877 p.  

E-Print Network [OSTI]

in Avian Biology 6: 252-261. Best, Louis B.; Whitmore, Robert C.; Booth, Gary M. 1990. Use of cornfields-99. Blake, John G. 1992. Temporal variation in point counts of birds in a low- land wet forest in Costa Rica

Standiford, Richard B.

374

North American Journal of Fisheries Management 24:287292, 2004 Copyright by the American Fisheries Society 2004  

E-Print Network [OSTI]

- nia biomass due to reduced fish predation in late winter and early spring (Schindler and Comita 1972

375

North American Journal of Fisheries Management 21:135146, 2001 Copyright by the American Fisheries Society 2001  

E-Print Network [OSTI]

on fish passage models that use data collected many years ago with outdated tech- niques and under tshawytscha and steelhead O. mykiss that enter the powerhouse turbine intakes at Snake River dams are guided

376

North American Journal of Fisheries Management 24:253257, 2004 Copyright by the American Fisheries Society 2004  

E-Print Network [OSTI]

$125) that provide flexibility for deploying the equipment in the laboratory or in the field. Specif observations in field environ- ments. Such cameras have been used for environ- mental monitoring (Cooke and Schreer 2002), en- ergetics assessments (Hinch and Collins 1991), habitat studies (Dibble and Harrel 1991

Cooke, Steven J.

377

North American Journal of Fisheries Management 23:905912, 2003 Copyright by the American Fisheries Society 2003  

E-Print Network [OSTI]

. Groups of 18­22 Cape Fear shiners were exposed to DC, 120-Hz pulsed DC (PDC), or 60-Hz PDC at voltage gradients of 1.1, 1.9, or 2.7 V/cm for 3 s. Mortality occurred only among fish exposed to 120-Hz PDC (25%) and DC (38%) applied at 2.7 V/cm. Because no mortality occurred in Cape Fear shiners exposed to 60-Hz PDC

Kwak, Thomas J.

378

North American Journal of Fisheries Management 22:770784, 2002 Copyright by the American Fisheries Society 2002  

E-Print Network [OSTI]

Hydroelectric Generating Station, Nova Scotia A. JAMIE F. GIBSON* Acadia Centre for Estuarine Research, Post structures such as the intake pipes at cooling water plants or the turbine intakes at hydroelectric abundance, behavior, and rates of passage at hydroelectric stations vary considerably in re- sponse

Myers, Ransom A.

379

North American Journal of Aquacultitre 64:278-283, 2002 Copyright by the American Fisheries Society 2002  

E-Print Network [OSTI]

period, the body mass of striped bass fed to satiety increased 22.9%, while that of fasted fish decreased of fasted fish increased sig- nificantly (P bass that were fasted Growth Hormone Levels in Striped Bass BRIAN. C. SMALL,*' JOSEPH H. SCARES, JR.,L. CURRY WOODS III

Hamza, Iqbal

380

North American Journal of Fisheries Management 11:43-49, 1991 @ Copyright by the AmericanFisheries Society 1991  

E-Print Network [OSTI]

-P) largemouth bass (RSD-P = percentage of stock-length fish that are also preferred length). Yellow perch growth size, and big large- mouth bass at the expense of bluegill size. Fish- eries biologists commonlyattemptFisheries Society 1991 Evaluation of Largemouth Bass-Yellow Perch Communitiesin Small South Dakota Impoundments

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

North American Journal of Fisheries Management 21:911917, 2001 Copyright by the American Fisheries Society 2001  

E-Print Network [OSTI]

of injectable fluorescent tags for use in mass marking of centrarchid fishes. Using age-0 largemouth bass appreciably in age-0 largemouth bass (50 mm) after 120 d with only 19% of fish retaining visible marks. For larger age-0 largemouth bass (100 mm), re- tention rates of IPDs after 48 d were greatest for fish marked

382

North RTL grid scan'' studies  

SciTech Connect (OSTI)

This study was made in response to screen measurements which indicated an emittance growth of nearly a factor of two within the North RTL or linac girder-1. Betatron oscillations are induced at the beginning of the North RTL to search for gross geometric aberrations arising within the RTL or sector-2 of the linac. The oscillations are induced horizontally and vertically with two X or two Y dipole correctors stepped in a nested loop fashion. In both cases the full set of RTL and first girder sector-2 linac beam position monitors (BPMs) are sampled in X and Y for each corrector setting. Horizontal (or vertical) data from pairs of BPMs are then transformed to phase space coordinates by the linear transformation constructed assuming the transport optics between the BPMs is known. A second transformation is then made to normalized phase space coordinates by using Twiss parameters consistent with the assumed transport optics. By careful choice of initial Twiss parameters the initial grid can be made square for convenience in graphical interpretation. A linear grid'' is then fitted to the transformed data points for each pair of BPMs. The area of each grid is calculated and linearity qualitatively evaluated. Furthermore, although not the focus of this study, the beta match at each BPM can be quantified. 6 figs.

Emma, P.

1990-10-17T23:59:59.000Z

383

Numerical analysis of laminar fluid flow and heat transfer in a parallel plate channel with normally in-line positioned plates  

E-Print Network [OSTI]

NUMERICAL ANALYSIS OF LAMINAR FLUID FLOW AND HEAT TRANSFER IN A PARALLEL PLATE CHANNEL WITH NORMALLY IN-LINE POSITIONED PLATES A Thesis by JOHN GRADY iVICMATH Submitted to the Office of Graduate Studies of Texas AkM University in partial... fulfillment of the requirements for the degree of MASTER OF SCIENCE December 1991 Major Subject: Mechanical Engineering NUMERICAL ANALYSIS OF LAMINAR FLUID FLOW AND HEAT TRANSFER IN A PARALLEL PLATE CHANNEI WITH NORMALLY IN-LINE POSITIONED PLATES A...

McMath, John Grady

2012-06-07T23:59:59.000Z

384

E-Print Network 3.0 - american ophthlamological society Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: of Graphic Arts American Psychological Association American Research Center in Egypt American Society... of Mammalogists American Society of Media Photographers American...

385

E-Print Network 3.0 - american ophthalmolgical society Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: of Graphic Arts American Psychological Association American Research Center in Egypt American Society... of Mammalogists American Society of Media Photographers American...

386

E-Print Network 3.0 - association american society Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: of Graphic Arts American Psychological Association American Research Center in Egypt American Society... of Mammalogists American Society of Media Photographers American...

387

New insights into North America-Pacific plate boundary deformation from Lake Tahoe, Salton Sea and Southern Baja California  

E-Print Network [OSTI]

attenuated in the shallow, unconsolidated sediments and isabove the MRE horizon. unconsolidated alluvial and glacialinternal bedding in the unconsolidated, medium- to coarse-

Brothers, Daniel Stephen

2009-01-01T23:59:59.000Z

388

Geological development, origin, and energy and mineral resources of Williston Basin, North Dakota  

SciTech Connect (OSTI)

The Williston Basin of North Dakota, Montana, South Dakota, and S.-Central Canada (Manitoba and Saskatchewan) is a major producer of oil and gas, lignite, and potash. Located on the western periphery of the Phanerozoic North American Craton, the Williston Basin has undergone only relatively mild tectonic distortion during Phanerozoic time. This distortion is related largely to movement of Precambrian basement blocks. Oil exploration and development in the US portion of the Williston basin from 1972 to present have given impetus to restudy of basin evolution and geologic controls for energy resource locations. Major structures in the basin, and the basin itself, may result from left-lateral shear along the Colorado-Wyoming and Eromberg zones during pre-Phanerozoic time. Deeper drilling in the basin has established several major new structures with indications of others.

Gerhard, L.C.; Anderson, S.B.; Lefever, J.A.; Carlson, C.G.

1982-05-01T23:59:59.000Z

389

Ecotourism demand in North-East Italy.fig Ecotourism demand in North-East Italy  

E-Print Network [OSTI]

Ecotourism demand in North-East Italy.fig 1 Ecotourism demand in North-East Italy Tempesta T.1 and analyse ecotourism in North-East Italy. The main objectives were to: a) define a methodology that would quantify the recreational flow from the results of phone and in-person interviews, b) analyse ecotourism

Tempesta, Tiziano

390

Laser-based characterization of nuclear fuel plates  

SciTech Connect (OSTI)

Ensuring the integrity of fuel-clad and clad-clad bonding in nuclear fuels is important for safe reactor operation and assessment of fuel performance, yet the measurement of bond strengths in actual fuels has proved challenging. The laser shockwave technique (LST) originally developed to characterize structural adhesion in composites is being employed to characterize interface strength in a new type of plate fuel being developed at Idaho National Laboratory (INL). LST is a non-contact method that uses lasers for the generation and detection of large-amplitude acoustic waves and is well suited for application to both fresh and irradiated nuclear-fuel plates. This paper will report on initial characterization results obtained from fresh fuel plates manufactured by different processes, including hot isostatic pressing, friction stir welding, and hot rolling.

Smith, James A.; Cottle, Dave L.; Rabin, Barry H. [Idaho National Laboratory, Fuel Performance and Design, P.O. Box 1625, Idaho Falls, Idaho, 83415-6188 (United States)

2014-02-18T23:59:59.000Z

391

Fuel cell repeater unit including frame and separator plate  

DOE Patents [OSTI]

An example fuel cell repeater includes a separator plate and a frame establishing at least a portion of a flow path that is operative to communicate fuel to or from at least one fuel cell held by the frame relative to the separator plate. The flow path has a perimeter and any fuel within the perimeter flow across the at least one fuel cell in a first direction. The separator plate, the frame, or both establish at least one conduit positioned outside the flow path perimeter. The conduit is outside of the flow path perimeter and is configured to direct flow in a second, different direction. The conduit is fluidly coupled with the flow path.

Yamanis, Jean; Hawkes, Justin R; Chiapetta, Jr., Louis; Bird, Connie E; Sun, Ellen Y; Croteau, Paul F

2013-11-05T23:59:59.000Z

392

Laser shockwave technique for characterization of nuclear fuel plate interfaces  

SciTech Connect (OSTI)

The US National Nuclear Security Agency is tasked with minimizing the worldwide use of high-enriched uranium. One aspect of that effort is the conversion of research reactors to monolithic fuel plates of low-enriched uranium. The manufacturing process includes hot isostatic press bonding of an aluminum cladding to the fuel foil. The Laser Shockwave Technique (LST) is here evaluated for characterizing the interface strength of fuel plates using depleted Uranium/Mo foils. LST is a non-contact method that uses lasers for the generation and detection of large amplitude acoustic waves and is therefore well adapted to the quality assurance of this process. Preliminary results show a clear signature of well-bonded and debonded interfaces and the method is able to classify/rank the bond strength of fuel plates prepared under different HIP conditions.

Perton, M.; Levesque, D.; Monchalin, J.-P.; Lord, M. [National Research Council Canada, 75 de Mortagne Blvd, Boucherville, Quebec, J4B 6Y4 (Canada); Smith, J. A.; Rabin, B. H. [Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID 83415-6188 (United States)

2013-01-25T23:59:59.000Z

393

Laser Shockwave Technique For Characterization Of Nuclear Fuel Plate Interfaces  

SciTech Connect (OSTI)

The US National Nuclear Security Agency is tasked with minimizing the worldwide use of high-enriched uranium. One aspect of that effort is the conversion of research reactors to monolithic fuel plates of low-enriched uranium. The manufacturing process includes hot isostatic press bonding of an aluminum cladding to the fuel foil. The Laser Shockwave Technique (LST) is here evaluated for characterizing the interface strength of fuel plates using depleted Uranium/Mo foils. LST is a non-contact method that uses lasers for the generation and detection of large amplitude acoustic waves and is therefore well adapted to the quality assurance of this process. Preliminary results show a clear signature of well-bonded and debonded interfaces and the method is able to classify/rank the bond strength of fuel plates prepared under different HIP conditions.

James A. Smith; Barry H. Rabin; Mathieu Perton; Daniel Lvesque; Jean-Pierre Monchalin; Martin Lord

2012-07-01T23:59:59.000Z

394

Laser-Based Characterization of Nuclear Fuel Plates  

SciTech Connect (OSTI)

Ensuring the integrity of fuel-clad and clad-clad bonding in nuclear fuels is important for safe reactor operation and assessment of fuel performance, yet the measurement of bond strengths in actual fuels has proved challenging. The laser shockwave technique (LST) originally developed to characterize structural adhesion in composites is being employed to characterize interface strength in a new type of plate fuel being developed at Idaho National Laboratory (INL). LST is a non-contact method that uses lasers for the generation and detection of large-amplitude acoustic waves and is well suited for application to both fresh and irradiated nuclear-fuel plates. This paper will report on initial characterization results obtained from fresh fuel plates manufactured by different processes, including hot isostatic pressing, friction stir welding, and hot rolling.

James A. Smith; David L. Cottle; Barry H. Rabin

2013-07-01T23:59:59.000Z

395

Scale-up of Carbon/Carbon Bipolar Plates  

SciTech Connect (OSTI)

This project was focused upon developing a unique material technology for use in PEM fuel cell bipolar plates. The carbon/carbon composite material developed in this program is uniquely suited for use in fuel cell systems, as it is lightweight, highly conductive and corrosion resistant. The project further focused upon developing the manufacturing methodology to cost-effectively produce this material for use in commercial fuel cell systems. United Technology Fuel Cells Corp., a leading fuel cell developer was a subcontractor to the project was interested in the performance and low-cost potential of the material. The accomplishments of the program included the development and testing of a low-cost, fully molded, net-shape carbon-carbon bipolar plate. The process to cost-effectively manufacture these carbon-carbon bipolar plates was focused on extensively in this program. Key areas for cost-reduction that received attention in this program was net-shape molding of the detailed flow structures according to end-user design. Correlations between feature detail and process parameters were formed so that mold tooling could be accurately designed to meet a variety of flow field dimensions. A cost model was developed that predicted the cost of manufacture for the product in near-term volumes and long-term volumes (10+ million units per year). Because the roduct uses lowcost raw materials in quantities that are less than competitive tech, it was found that the cost of the product in high volume can be less than with other plate echnologies, and can meet the DOE goal of $4/kW for transportation applications. The excellent performance of the all-carbon plate in net shape was verified in fuel cell testing. Performance equivalent to much higher cost, fully machined graphite plates was found.

David P. Haack

2009-04-08T23:59:59.000Z

396

Geothermal energy for American Samoa  

SciTech Connect (OSTI)

The geothermal commercialization potential in American Samoa was investigated. With geothermal energy harnessed in American Samoa, a myriad of possibilities would arise. Existing residential and business consumers would benefit from reduced electricity costs. The tuna canneries, demanding about 76% of the island's process heat requirements, may be able to use process heat from a geothermal source. Potential new industries include health spas, aquaculture, wood products, large domestic and transhipment refrigerated warehouses, electric cars, ocean nodule processing, and a hydrogen economy. There are no territorial statutory laws of American Samoa claiming or reserving any special rights (including mineral rights) to the territorial government, or other interests adverse to a land owner, for subsurface content of real property. Technically, an investigation has revealed that American Samoa does possess a geological environment conducive to geothermal energy development. Further studies and test holes are warranted.

Not Available

1980-03-01T23:59:59.000Z

397

Vibration of circular plates, of several thicknesses, with three supports  

E-Print Network [OSTI]

~ ~ ~ ~ ~ ~ e ~ o ~ ~ i Prccedure and DeeoriPt'alen Of APPSXat'aua ~ ~ e ~ a ~ 0 ~ ~ i EmPirioal Ccrrelabicn Of Dataa ~ ~ ~ 1 ~ ~ ~ 01 ~ ~ ~ ~ ~ ~ ~ ~ i Kathemat, ical Theory of Thin Plates ~ a ~ ~ ~ ~ ~ 1 ~ a ~ ~ ~ Heeultaa ~ ~ ~ ~ ~ a... (cps) e M = symmetric mode, ie. 1, 2, 3, and 4. h= thickness of circular plate, in, Vhen there are mox'e than-thoro variables involved in the x esult, s of an experimental research, an empirical xelat, ionsh1p concerning the several variables may...

Ballentine, John Richard

2012-06-07T23:59:59.000Z

398

Next Generation Bipolar Plates for Automotive PEM Fuel Cells  

SciTech Connect (OSTI)

The results of a successful U.S. Department of Energy (DoE) funded two-year $2.9 MM program lead by GrafTech International Inc. (GrafTech) are reported and summarized. The program goal was to develop the next generation of high temperature proton exchange membrane (PEM) fuel cell bipolar plates for use in transportation fuel cell applications operating at temperatures up to 120 C. The bipolar plate composite developed during the program is based on GrafTechs GRAFCELL? resin impregnated flexible graphite technology and makes use of a high temperature Huntsman Advanced Materials resin system which extends the upper use temperature of the composite to the DoE target. High temperature performance of the new composite is achieved with the added benefit of improvements in strength, modulus, and dimensional stability over the incumbent resin systems. Other physical properties, including thermal and electrical conductivity of the new composite are identical to or not adversely affected by the new resin system. Using the new bipolar plate composite system, machined plates were fabricated and tested in high temperature single-cell fuel cells operating at 120 C for over 1100 hours by Case Western Reserve University. Final verification of performance was done on embossed full-size plates which were fabricated and glued into bipolar plates by GrafTech. Stack testing was done on a 10-cell full-sized stack under a simulated drive cycle protocol by Ballard Power Systems. Freeze-thaw performance was conducted by Ballard on a separate 5-cell stack and shown to be within specification. A third stack was assembled and shipped to Argonne National Laboratory for independent performance verification. Manufacturing cost estimate for the production of the new bipolar plate composite at current and high volume production scenarios was performed by Directed Technologies Inc. (DTI). The production cost estimates were consistent with previous DoE cost estimates performed by DTI for the DoE on metal plates. The final result of DTIs analysis for the high volume manufacturing scenario ($6.85 /kW) came in slightly above the DoE target of $3 to $5/kW. This estimate was derived using a Best Case Scenario for many of the production process steps and raw material costs with projections to high volumes. Some of the process improvements assumed in this Best Case Scenario including high speed high impact forming and solvent-less resins, have not yet been implemented, but have a high probability of potential success.

Orest Adrianowycz; Julian Norley; David J. Stuart; David Flaherty; Ryan Wayne; Warren Williams; Roger Tietze; Yen-Loan H. Nguyen; Tom Zawodzinski; Patrick Pietrasz

2010-04-15T23:59:59.000Z

399

Optical processing furnace with quartz muffle and diffuser plate  

DOE Patents [OSTI]

An optical furnace for annealing a process wafer comprising a source of optical energy, a quartz muffle having a door to hold the wafer for processing, and a quartz diffuser plate to diffuse the light impinging on the quartz muffle; a feedback system with a light sensor located in the door or wall of the muffle is also provided for controlling the source of optical energy. The quartz for the diffuser plate is surface etched (to give the quartz diffusive qualities) in the furnace during a high intensity burn-in process.

Sopori, Bhushan L. (Denver, CO)

1995-01-01T23:59:59.000Z

400

Multi-well sample plate cover penetration system  

DOE Patents [OSTI]

An apparatus for penetrating a cover over a multi-well sample plate containing at least one individual sample well includes a cutting head, a cutter extending from the cutting head, and a robot. The cutting head is connected to the robot wherein the robot moves the cutting head and cutter so that the cutter penetrates the cover over the multi-well sample plate providing access to the individual sample well. When the cutting head is moved downward the foil is pierced by the cutter that splits, opens, and folds the foil inward toward the well. The well is then open for sample aspiration but has been protected from cross contamination.

Beer, Neil Reginald (Pleasanton, CA)

2011-12-27T23:59:59.000Z

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

american subtropical area: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

English American Studies Sussex, University of 30 Grant Title: AMERICAN ASSOCIATION OF UNIVERSITY WOMEN (AAUW) -AMERICAN FELLOWSHIPS Funding Opportunity Number: NA Engineering...

402

Society of American Indian Government Employees Annual National Training Program  

Broader source: Energy.gov [DOE]

Event includes plenary session, American Indian law classes, Native American youth workshops, cultural presentations, and a veterans program. Sponsored by theSociety of American Indian Government...

403

Passive Cooling for Your North Carolina Home  

E-Print Network [OSTI]

into passive or active solar heating as a way of reducing the amount of energy used in their home. In most designed home in North Carolina, whether it is solar or not, should be designed to require a minimum amountPassive Cooling for Your North Carolina Home As energy costs rise, and the public becomes more

404

West Central North East Area of Tucson  

E-Print Network [OSTI]

0 500 1000 1500 2000 2500 3000 West Central North East Area of Tucson #Individuals Anna Broad-billed Costa Rufous Black-chinned 0 500 1000 1500 2000 2500 3000 West Central North East Area of Tucson not be conflicting, and urban areas may actually provide valuable surrogates for degraded habitats. Our knowledge

Hall, Sharon J.

405

North Star Refrigerator: Order (2013-CE-5355)  

Broader source: Energy.gov [DOE]

DOE ordered North Star Refrigerator Co., Inc. to pay a $8,000 civil penalty after finding North Star Refrigerator had failed to certify that any basic models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

406

North Dakota Refining Capacity Study  

SciTech Connect (OSTI)

According to a 2008 report issued by the United States Geological Survey, North Dakota and Montana have an estimated 3.0 to 4.3 billion barrels of undiscovered, technically recoverable oil in an area known as the Bakken Formation. With the size and remoteness of the discovery, the question became 'can a business case be made for increasing refining capacity in North Dakota?' And, if so what is the impact to existing players in the region. To answer the question, a study committee comprised of leaders in the region's petroleum industry were brought together to define the scope of the study, hire a consulting firm and oversee the study. The study committee met frequently to provide input on the findings and modify the course of the study, as needed. The study concluded that the Petroleum Area Defense District II (PADD II) has an oversupply of gasoline. With that in mind, a niche market, naphtha, was identified. Naphtha is used as a diluent used for pipelining the bitumen (heavy crude) from Canada to crude markets. The study predicted there will continue to be an increase in the demand for naphtha through 2030. The study estimated the optimal configuration for the refinery at 34,000 barrels per day (BPD) producing 15,000 BPD of naphtha and a 52 percent refinery charge for jet and diesel yield. The financial modeling assumed the sponsor of a refinery would invest its own capital to pay for construction costs. With this assumption, the internal rate of return is 9.2 percent which is not sufficient to attract traditional investment given the risk factor of the project. With that in mind, those interested in pursuing this niche market will need to identify incentives to improve the rate of return.

Dennis Hill; Kurt Swenson; Carl Tuura; Jim Simon; Robert Vermette; Gilberto Marcha; Steve Kelly; David Wells; Ed Palmer; Kuo Yu; Tram Nguyen; Juliam Migliavacca

2011-01-05T23:59:59.000Z

407

VOLUME 12 APRIL 1999J O U R N A L O F C L I M A T E 1999 American Meteorological Society 917  

E-Print Network [OSTI]

VOLUME 12 APRIL 1999J O U R N A L O F C L I M A T E 1999 American Meteorological Society 917 Remote the solar radiation absorbed by the ocean, thereby leading to enhanced SSTs. In the tropical North Atlantic. These relationships fit the concept of an ``atmospheric bridge'' that connects SST anomalies in the central equatorial

408

Eos, Transactions, American Geophysical Union, Vol. 91, No.5, 2 February 2010, P-Jges 41-42 Severe Ice Cover on Great Lakes  

E-Print Network [OSTI]

Ice Cover on Great Lakes DuringWinter 2008-2009 The North American Great Lakes contain about 95. Because of this concentration of pop- ulation, the ice cover that forms on the Great Lakes each winter and its year-la-year vari- ability affect the regional economy [Niimi, 1982]. Ice cover also affects

409

Film cooling on a flat plate: investigating density  

E-Print Network [OSTI]

This study is an investigation of two specific effects on turbine blade film cooling. The effect of coolant to mainstream density ratio and upstream steps was studied. The studies were conducted on two flat plates with 4mm cylindrical film cooling...

Grizzle, Joshua Peter Fletcher

2009-05-15T23:59:59.000Z

410

Optical processing furnace with quartz muffle and diffuser plate  

DOE Patents [OSTI]

An optical furnace for annealing a process wafer comprising a source of optical energy, a quartz muffle having a door to hold the wafer for processing, and a quartz diffuser plate to diffuse the light impinging on the quartz muffle; a feedback system with a light sensor located in the wall of the muffle is also provided for controlling the source of optical energy.

Sopori, Bhushan L. (Denver, CO)

1996-01-01T23:59:59.000Z

411

Microwave sintering of single plate-shaped articles  

DOE Patents [OSTI]

Apparatus and method are disclosed for high temperature sintering of plate-shaped articles of alumina, magnesia, silica, yttria, zirconia, and mixtures thereof using microwave radiation. An article is placed within a sintering structure located within a sintering container which is placed in a microwave cavity for heating. The rates at which heating and cooling take place is controlled. 2 figs.

Katz, J.D.; Blake, R.D.

1995-07-11T23:59:59.000Z

412

Low Cost PEM Fuel Cell Metal Bipolar Plates  

Broader source: Energy.gov (indexed) [DOE]

manufacture. - Demonstrate our metal plate application in portable, stationary and automobile fuel cell systems. 0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50...

413

anterior locking plates: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

acq(A)2; rel(A)3; acq(C)10; rel(C)11; Q : acq(B)6; rel(B)7; acq(D)14; rel(D)15 Mller-Olm, Markus 277 MICROPLATES OptiPlates (white and black) Biology and Medicine Websites...

414

Enhanced radiative heat transfer between nanostructured gold plates  

E-Print Network [OSTI]

We compute the radiative heat transfer between nanostructured gold plates in the framework of the scattering theory. We predict an enhancement of the heat transfer as we increase the depth of the corrugations while keeping the distance of closest approach fixed. We interpret this effect in terms of the evolution of plasmonic and guided modes as a function of the grating's geometry.

R. Gurout; J. Lussange; F. S. S. Rosa; J. -P. Hugonin; D. A. R. Dalvit; J. -J. Greffet; A. Lambrecht; S. Reynaud

2012-03-07T23:59:59.000Z

415

STEEL PLATE SHEAR WALL BUILDINGS: DESIGN REQUIREMENTS AND RESEARCH  

E-Print Network [OSTI]

STEEL PLATE SHEAR WALL BUILDINGS: DESIGN REQUIREMENTS AND RESEARCH Michel Bruneau, P.E. 1 Dr. Bruneau is conducting research on the seismic evaluation and retrofit of existing steel bridges, steel of this research, and has co- authored the book "Ductile Design of Steel Structures" published in 1997 by Mc

Bruneau, Michel

416

Cost Effective Surface Modification For Metallic Bipolar Plates  

E-Print Network [OSTI]

.g. stamping or corrugation) ·Gas impermeable ·Higher electrical and thermal conductivities Relates to DOE R&D Plan Component Technical Barriers Task 14 "Alternative bipolar plate materials/coatings that are low an electrical- conductive and corrosion-resistant nitride surface layer during thermal (gas) nitriding ·Existing

417

Plate-Based Fuel Processing System Final Report  

SciTech Connect (OSTI)

On-board reforming of liquid fuels into hydrogen is an enabling technology that could accelerate consumer usage of fuel cell powered vehicles. The technology would leverage the convenience of the existing gasoline fueling infrastructure while taking advantage of the fuel cell efficiency and low emissions. Commercial acceptance of on-board reforming faces several obstacles that include: (1) startup time, (2) transient response, and (3) system complexity (size, weight and cost). These obstacles are being addressed in a variety of projects through development, integration and optimization of existing fuel processing system designs. In this project, CESI investigated steam reforming (SR), water-gas-shift (WGS) and preferential oxidation (PrOx) catalysts while developing plate reactor designs and hardware where the catalytic function is integrated into a primary surface heat exchanger. The plate reactor approach has several advantages. The separation of the reforming and combustion streams permits the reforming reaction to be conducted at a higher pressure than the combustion reaction, thereby avoiding costly gas compression for combustion. The separation of the two streams also prevents the dilution of the reformate stream by the combustion air. The advantages of the plate reactor are not limited to steam reforming applications. In a WGS or PrOx reaction, the non-catalytic side of the plate would act as a heat exchanger to remove the heat generated by the exothermic WGS or PrOx reactions. This would maintain the catalyst under nearly isothermal conditions whereby the catalyst would operate at its optimal temperature. Furthermore, the plate design approach results in a low pressure drop, rapid transient capable and attrition-resistant reactor. These qualities are valued in any application, be it on-board or stationary fuel processing, since they reduce parasitic losses, increase over-all system efficiency and help perpetuate catalyst durability. In this program, CESI took the initial steam reforming plate-reactor concept and advanced it towards an integrated fuel processing system. A substantial amount of modeling was performed to guide the catalyst development and prototype hardware design and fabrication efforts. The plate-reactor mechanical design was studied in detail to establish design guidelines which would help the plate reactor survive the stresses of repeated thermal cycles (from start-ups and shut-downs). Integrated system performance modeling was performed to predict system efficiencies and determine the parameters with the most significant impact on efficiency. In conjunction with the modeling effort, a significant effort was directed towards catalyst development. CESI developed a highly active, sulfur tolerant, coke resistant, precious metal based reforming catalyst. CESI also developed its own non-precious metal based water-gas shift catalyst and demonstrated the catalysts durability over several thousands of hours of testing. CESI also developed a unique preferential oxidation catalyst capable of reducing 1% CO to < 10 ppm CO over a 35 C operating window through a single pass plate-based reactor. Finally, CESI combined the modeling results and steam reforming catalyst development efforts into prototype hardware. The first generation 3kW(e) prototype was fabricated from existing heat-exchanger plates to expedite the fabrication process. This prototype demonstrated steady state operation ranging from 5 to 100% load conditions. The prototype also demonstrated a 20:1 turndown ratio, 10:1 load transient operation and rapid start-up capability.

Carlos Faz; Helen Liu; Jacques Nicole; David Yee

2005-12-22T23:59:59.000Z

418

Normal and lateral Casimir forces between deformed plates  

SciTech Connect (OSTI)

The Casimir force between macroscopic bodies depends strongly on their shape and orientation. To study this geometry dependence in the case of two deformed metal plates, we use a path-integral quantization of the electromagnetic field which properly treats the many-body nature of the interaction, going beyond the commonly used pairwise summation (PWS) of van der Waals forces. For arbitrary deformations we provide an analytical result for the deformation induced change in the Casimir energy, which is exact to second order in the deformation amplitude. For the specific case of sinusoidally corrugated plates, we calculate both the normal and the lateral Casimir forces. The deformation induced change in the Casimir interaction of a flat and a corrugated plate shows an interesting crossover as a function of the ratio of the mean plate distance H to the corrugation length {lambda}: For {lambda}<>H. The amplitude of the lateral force between two corrugated plates which are out of registry is shown to have a maximum at an optimal wavelength of {lambda}{approx_equal}2.5 H. With increasing H/{lambda} > or approx. 0.3 the PWS approach becomes a progressively worse description of the lateral force due to many-body effects. These results may be of relevance for the design and operation of novel microelectromechanical systems (MEMS) and other nanoscale devices.

Emig, Thorsten; Hanke, Andreas; Golestanian, Ramin; Kardar, Mehran [Institut fuer Theoretische Physik, Universitaet zu Koeln, Zuelpicher Strasse 77, D-50937 Cologne (Germany); Institut fuer Theoretische Physik, Universitaet Stuttgart, Pfaffenwaldring 57, D-70550 Stuttgart (Germany); Institute for Advanced Studies in Basic Sciences, Zanjan 45195-159 (Iran, Islamic Republic of); Institute for Studies in Theoretical Physics and Mathematics, P.O. Box 19395-5531, Tehran (Iran, Islamic Republic of); Physics Department, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States)

2003-02-01T23:59:59.000Z

419

West Valley Demonstration Project - North Plateau Strontium-90...  

Office of Environmental Management (EM)

Demonstration Project - North Plateau Strontium-90 West Valley Demonstration Project - North Plateau Strontium-90 January 1, 2014 - 12:00pm Addthis US Department of Energy...

420

North Central Texas Alternative Fuel and Advanced Technology...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

North Central Texas Alternative Fuel and Advanced Technology Investments North Central Texas Alternative Fuel and Advanced Technology Investments 2011 DOE Hydrogen and Fuel Cells...

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

North Dakota: EERE-Funded Project Recycles Energy, Generates...  

Office of Environmental Management (EM)

North Dakota: EERE-Funded Project Recycles Energy, Generates Electricity North Dakota: EERE-Funded Project Recycles Energy, Generates Electricity June 17, 2014 - 2:58pm Addthis...

422

North Central Texas Alternative Fuel and Advanced Technology...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

D.C. tiarravt057reese2010p.pdf More Documents & Publications North Central Texas Alternative Fuel and Advanced Technology Investments North Central Texas Alternative Fuel and...

423

North Central Texas Alternative Fuel and Advanced Technology...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

North Central Texas Alternative Fuel and Advanced Technology Investments North Central Texas Alternative Fuel and Advanced Technology Investments 2012 DOE Hydrogen and Fuel Cells...

424

STEM Career Showcase for Students with Disabilities - North Carolina...  

Broader source: Energy.gov (indexed) [DOE]

STEM Career Showcase for Students with Disabilities - North Carolina Museum of Natural Sciences STEM Career Showcase for Students with Disabilities - North Carolina Museum of...

425

Moving North Texas Forward by Addressing Alternative Fuel Barriers...  

Broader source: Energy.gov (indexed) [DOE]

MOVING NORTH TEXAS FORWARD BY ADDRESSING ALTERANATIVE FUEL BARRIERS Presenter: Pamela Burns North Central Texas Council of Governments June 20, 2014 P.I. Mindy Mize Project ID...

426

Energy Independence for North America - Transition to the Hydrogen...  

Broader source: Energy.gov (indexed) [DOE]

Energy Independence for North America - Transition to the Hydrogen Economy Energy Independence for North America - Transition to the Hydrogen Economy 2003 DEER Conference...

427

Secretary Moniz Announces Travel to Chicago, North Dakota, New...  

Energy Savers [EERE]

Travel to Chicago, North Dakota, New Mexico for Quadrennial Energy Review Secretary Moniz Announces Travel to Chicago, North Dakota, New Mexico for Quadrennial Energy Review August...

428

Laminated exfoliated graphite composite-metal compositions for fuel cell flow field plate or bipolar plate applications  

DOE Patents [OSTI]

An electrically conductive laminate composition for fuel cell flow field plate or bipolar plate applications. The laminate composition comprises at least a thin metal sheet having two opposed exterior surfaces and a first exfoliated graphite composite sheet bonded to the first of the two exterior surfaces of the metal sheet wherein the exfoliated graphite composite sheet comprises: (a) expanded or exfoliated graphite and (b) a binder or matrix material to bond the expanded graphite for forming a cohered sheet, wherein the binder or matrix material is between 3% and 60% by weight based on the total weight of the first exfoliated graphite composite sheet. Preferably, the first exfoliated graphite composite sheet further comprises particles of non-expandable graphite or carbon in the amount of between 3% and 60% by weight based on the total weight of the non-expandable particles and the expanded graphite. Further preferably, the laminate comprises a second exfoliated graphite composite sheet bonded to the second surface of the metal sheet to form a three-layer laminate. Surface flow channels and other desired geometric features can be built onto the exterior surfaces of the laminate to form a flow field plate or bipolar plate. The resulting laminate has an exceptionally high thickness-direction conductivity and excellent resistance to gas permeation.

Zhamu, Aruna; Shi, Jinjun; Guo, Jiusheng; Jang, Bor Z

2014-05-20T23:59:59.000Z

429

Fuel Cell Manufacturing: American Energy and Manufacturing Competitive...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit Presentation on...

430

american students utilizing: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

PARTNERS American Institute of Chemical Engineers Alpha Omega Epsilon International Engineering & Technical Science Sorority American Society of Heating, Refrigerating and...

431

E-Print Network 3.0 - anisotropic plates subjected Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in a Langmuir trough experiment is the Wilhelmy plate.1... The plate measures the net tension on the surface. The reported surface pressure is then the tension ... Source: Lee,...

432

Development of fabrication techniques for europia/iron cermet reactor control-arm plates  

SciTech Connect (OSTI)

Dense europia spheroids were dispersed in iron powder prior to pressing and sintering. The plates had adequate strength and possessed a neutron absorption worth in excess of comparable cadmium plates. 4 refs.

Moore, D.A.; Tarrant, E.A.

1982-06-01T23:59:59.000Z

433

Buckling and vibration of orthotropic plates with an internal line hinge  

E-Print Network [OSTI]

locations, and edge support conditions. In particular, buckling factors are determined for plates with modulus ratios of 1, 3, 10 and 25 using the classical plate theory and first order shear deformation theory. Vibration frequencies are obtained...

Gupta, Praveen R.

2001-01-01T23:59:59.000Z

434

Vibration suppression of laminated composite plates using embedded smart material layers  

E-Print Network [OSTI]

In this study, a complete theoretical formulation of laminated composite plates with integrated smart material layers that serve as sensors and/or actuators is presented for the vibration suppression of laminated composite plates. The third...

Krishnan, Sivasubramaniam

2000-01-01T23:59:59.000Z

435

Vibration control in plates by uniformly distributed PZT actuators interconnected via electric networks  

E-Print Network [OSTI]

improve the performances of piezoelectric actuation. internal resonance / equivalent circuits 1Vibration control in plates by uniformly distributed PZT actuators interconnected via electric vibrations of plates by means of a set of electrically-interconnected piezoelectric actuators is described

Paris-Sud XI, Université de

436

E-Print Network 3.0 - automated microbiology plating Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

need to be performed as part of (automated version of) assay 1.1.2. Identify appropriate micro-plate... plates? Does the automation (material handling robot) have sufficient...

437

New Zone Plate for Soft X-Ray Microscopy at 15-nm Spatial Resolution  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

New Zone Plate for Soft X-Ray Microscopy at 15-nm Spatial Resolution New Zone Plate for Soft X-Ray Microscopy at 15-nm Spatial Resolution Print Wednesday, 31 August 2005 00:00...

438

Invited Paper Shape Control of Composite Material Plates Using Piezoelectric Actuators  

E-Print Network [OSTI]

of smart structures. These material include piezoelectric polymers and ceramics, shape memory alloysInvited Paper Shape Control of Composite Material Plates Using Piezoelectric Actuators Brij N control of composite material plates using piezoelectric actuators. A finite element formulation

439

Information Technology: American National Standard for  

E-Print Network [OSTI]

Information Technology: American National Standard for Information Systems-- Data Format Publication 500-245 Information Technology: American National Standard for Information Systems-- Data Format for the Interchange of Fingerprint, Facial, & Scar Mark & Tattoo (SMT) Information Sponsored by Information Technology

440

Information Technology: American National Standard for Information  

E-Print Network [OSTI]

Information Technology: American National Standard for Information Systems-- Data Format-271 Information Technology: American National Standard for Information Systems-- Data Format for the Interchange Sponsored by Information Access Division Information Technology Laboratory National Institute of Standards

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Information Technology: American National Standard for Information  

E-Print Network [OSTI]

Information Technology: American National Standard for Information Systems-- Data Format 500-275 Information Technology: American National Standard for Information Systems-- Data Format Coleman, and Patrice Yuh, Editors Sponsored by Information Access Division Information Technology

442

Heart Healthy Home Cooking African American Style  

E-Print Network [OSTI]

Heart Healthy Home Cooking African American Style With Every Heartbeat Is Life #12;#12;Heart Recipe Substitutions for Heart Healthy Cooking at the heart of African American family life and special celebrations. This recipe book brings together many

Bandettini, Peter A.

443

American Range: Order (2014-CE-23006)  

Broader source: Energy.gov [DOE]

DOE ordered American Range Corporation to pay a $8,000 civil penalty after finding American Range had failed to certify that certain models of cooking products comply with the applicable energy conservation standards.

444

American Valve: Order (2010-CW-1411)  

Broader source: Energy.gov [DOE]

DOE ordered American Valve, Inc. to pay a $5,000 civil penalty after finding American Valve had failed to certify that certain showerhead models comply with the applicable water conservation standards.

445

The Puzzle of Hypertension in African-Americans56 Scientific American February 1999 The Puzzle of  

E-Print Network [OSTI]

The Puzzle of Hypertension in African-Americans56 Scientific American February 1999 The Puzzle of Hypertension in African-Americans by Richard S. Cooper, Charles N. Rotimi and Ryk Ward N early all Americans undergo a steady rise in blood pressure with age. Almost 25 percent cross the line into hypertension

Fraden, Seth

446

Manufacturing of composite violin top plates and design of composite tailpieces By : Maxime Beaulieu  

E-Print Network [OSTI]

the Chladni pattern method and Tap Tone method. ·A qualitative analysis of the acoustics when the plates

Barthelat, Francois

447

The driving force of plate tectonics evaluated in spherical coordinates  

E-Print Network [OSTI]

the West Coast of North America, 40'N to 52'N latitude, Geol. Soc. Amer. Bull. , 82, 1267-1270, 1961. Rea, D. K. , Changes in the axial configuration of the East Pacific Rise near 6'S during the last 2 m. y. , J. Geophys. Res. , 81, 1495-1504, 1976a... Rise, Ph. D. thesis, Princeton Univ. , Princeton, N. J. , 1974. Hey, R. N. and D. S. Wilson, Propagating rift explanation for the tectonic evolution of the North-East Pacific ? the pseudo movie, Earth Planet. Sci. Lett. , 58, 167-188, 1982. Holmes...

Donahue, John Michael

1985-01-01T23:59:59.000Z

448

North Slope export ban in repealed  

SciTech Connect (OSTI)

The U.S. Senate and House both approve a bill lifting the 20-year-old ban on exports from the North Slope. The importance of this action is described.

NONE

1995-08-01T23:59:59.000Z

449

Record pace aids healthier outlook. [North Dakota  

SciTech Connect (OSTI)

North Dakota oil production may set another record in 1984. This may also be the second best year in history for petroleum industry activity in the Williston Basin. Geophysical exploration activities in the Williston Basin are described.

Rountree, R.

1984-10-01T23:59:59.000Z

450

Groundwater Classification and Standards (North Carolina)  

Broader source: Energy.gov [DOE]

The rules established in this Subchapter 2L of North Carolina Administrative Code Title 15A are intended to maintain and preserve the quality of the groundwaters, prevent and abate pollution and...

451

Environmental Radioactivity in the North Atlantic Region.  

E-Print Network [OSTI]

, polonium« plutonium and americium. Finally technetium-99 data on seaweed samples col- lected in the North Atlantic region since the beginning of the sixties are presented. INIS Descriptors AMERICIUM 241; ANIMALS

452

Wind Energy Permitting Standards (North Carolina)  

Broader source: Energy.gov [DOE]

North Carolina has statewide permitting requirements for wind energy facilities. Any wind turbine or collection of wind turbines located within a half mile of each other with a collective rated...

453

Qualifying RPS State Export Markets (North Carolina)  

Broader source: Energy.gov [DOE]

This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in North Carolina as eligible sources towards their RPS targets or goals. For specific...

454

Qualifying RPS State Export Markets (North Dakota)  

Broader source: Energy.gov [DOE]

This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in North Dakota as eligible sources towards their RPS targets or goals. For specific...

455

North Campus Plan University of Alaska Fairbanks  

E-Print Network [OSTI]

and Wildlife Carol Adamczak, Senior Project Manager, Division of Design and Construction, Facilities Services Pamela Davis, Executive Director, Development Office Terry Dowdy, Director, Environmental Health & Safety, Fairbanks North Star Borough Luke Hopkins, Manager, Facilities Services Katie Murra, Graduate student Ian

Hartman, Chris

456

1999 Macmillan Magazines LtdNATURE |VOL 402 |18 NOVEMBER 1999 |www.nature.com 291 letters to nature  

E-Print Network [OSTI]

Daphnia9 , in North American rivers where muddy turbidity limits vision. Instead, paddlesh use.m.s.) of a randomly varying electrical stimulus passed through the water in the swim mill, between plate electrodes

Bahar, Sonya

457

Economic Impact of the American Clean Energy  

E-Print Network [OSTI]

Economic Impact of the American Clean Energy and Security Act of 2009 on the West Virginia Economy ........................................................................................................................ 1 American Clean Energy and Security Act of 2009 at reducing greenhouse gas emissions. This report examines the impact of the American Clean Energy

Mohaghegh, Shahab

458

American Studies Graduate Program Advisor Form  

E-Print Network [OSTI]

American Studies Graduate Program Advisor Form Thank you for your interest in the American Studies must first secure an advisor in order to be considered for admission. The first-year advisor can, American Studies is not in a position to assign faculty to serve as advisors. It is, therefore

Dyer, Bill

459

AMERICAN UNIVERSITY College of Arts and Science  

E-Print Network [OSTI]

: History of Ideas in America Culture and Thought in 20th Century America U.S. History I & II History of Law with the Bomb: America in the Nuclear Age American Decades: The 1930s (American Studies Course) American Culture in the Nuclear Age Contemporary Culture: Nuclear Culture Emergence of Modern America, 1877-1920 Historical

Lansky, Joshua

460

Effect of Plating Variables on Whisker Formation in Pure Tin Films  

E-Print Network [OSTI]

Effect of Plating Variables on Whisker Formation in Pure Tin Films Stephanie Miller Advisors & Materials Engineering, Washington State University Introduction Tin whiskers are single-crystal filaments the effect of plating variables on whisker growth in tin-plated copper samples, with the goal of finding

Collins, Gary S.

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Electroless iron plating on pure magnesium for biomedical applications Xingkai Zhang a  

E-Print Network [OSTI]

: Biomaterials Deposition Corrosion Thin films a b s t r a c t Electroless nickel plating is usually adopted geometries. Electroless nickel plating [10] is usually used to protect the magnesium alloy from corrosionElectroless iron plating on pure magnesium for biomedical applications Xingkai Zhang a , Wei Han a

Zheng, Yufeng

462

Antiproton, positron, and electron imaging with a microchannel plate/phosphor detector  

E-Print Network [OSTI]

Antiproton, positron, and electron imaging with a microchannel plate/phosphor detector ALPHA; accepted 2 November 2009; published online 1 December 2009 A microchannel plate MCP /phosphor screen Microchannel plate MCP /phosphor screen based diag- nostics have proved invaluable in studying the evolution

Fajans, Joel

463

Author's personal copy Investigation of effect of polyurea on response of steel plates  

E-Print Network [OSTI]

Author's personal copy Investigation of effect of polyurea on response of steel plates to impulsive the results of the response of monolithic steel plates and steel-polyurea bilayer plates to impulsive blast), it will magnify the initial shock effect and promote fail- ure. These experimental results are paralleled

Nemat-Nasser, Sia

464

FRACTURE INVESTIGATION IN FRP PLATE DEBONDING and C.J. Burgoyne1  

E-Print Network [OSTI]

1 FRACTURE INVESTIGATION IN FRP PLATE DEBONDING G.X. Guan1 and C.J. Burgoyne1 1 Department. The plate debonding is clearly a fracture event that is initiated from the inevitable flaws in the concrete fracture observation for the plate debonding failure that occurs in the concrete cover layer. This paper

Burgoyne, Chris

465

Response of a slotted plate flow meter to horizontal two phase flow  

E-Print Network [OSTI]

meter is always better in performance and accuracy than the standard orifice plate flow meter. This study is primarily based on how a slotted plate responds to horizontal two-phase flow with air and water being used as the working fluids. The plates...

Muralidharan, Vasanth

2005-02-17T23:59:59.000Z

466

On the effective plate thickness of monolayer graphene from flexural wave propagation  

E-Print Network [OSTI]

On the effective plate thickness of monolayer graphene from flexural wave propagation Sung Youb Kim utilize classical molecular dynamics to study flexural, or transverse wave propagation in monolayer) mode of wave propagation in a thin plate with plate thickness of h ¼ 0:104 nm. Finally, we find

Lin, Xi

467

Future prospects for radioactive nuclear beams in North America  

SciTech Connect (OSTI)

In 1989 this author proposed the construction of a dedicated, flexible, radioactive nuclear beams facility that would provide intense beams of nearly all elements for a program of scientific studies in nuclear structure, nuclear reaction dynamics, astrophysics, high-spin physics, nuclei far from stability, material- and surface science, and atomic- and hyperfine-interaction physics. The initial name proposed for the new facility was ``IsoSpin Factory`` to underscore the key feature of this new physics tool; it was later changed to ``IsoSpin Laboratory`` (ISL). The ISL is now supported by a broad base of nuclear scientists and has been identified in the US Long Range Plan on Nuclear Science as one of the new potential construction projects for the second part of this decade. Since 1989 a number of conferences and workshops has been held in which the scientific and technical case for RNB facilities has been made. The purpose of this paper is to focus on the North American plan for the ISL, which was initially summarized in a ``White Paper`` but has since evolved in its scientific and technical scop.

Nitschke, J.M.

1993-05-01T23:59:59.000Z

468

1988 Wet deposition temporal and spatial patterns in North America  

SciTech Connect (OSTI)

The focus of this report is on North American wet deposition temporal patterns from 1979 to 1988 and spatial patterns for 1988. It is the third in a series of reports that investigate the patterns of annual precipitation-weighted average concentration and annual deposition for nine ion species: hydrogen, sulfate, nitrate, ammonium, calcium, chloride, sodium, potassium, and magnesium. Mosaic maps, based on surface estimation using kriging, display concentration and deposition spatial patterns of pH, hydrogen, sulfate, nitrate, ammonium, and calcium ion species for 1988 annual, winter, and summer periods. Temporal pattern analyses use a subset of 35 sites over a 10-year (1979--1988) period and an expanded subset of 137 sites, with greater spatial coverage, over a 7-year (1982--1988) period. The 10-year period represents the longest period with wet deposition monitoring data available that has a sufficient number of sites with data of known quality to allow a descriptive summary of annual temporal patterns. Sen's median trend estimate and Kendall's seasonal tau (KST) test are calculated for each ion species concentration and deposition at each site in both subsets.

Simpson, J.C.; Olsen, A.R.; Bittner, E.A.

1992-03-01T23:59:59.000Z

469

1988 Wet deposition temporal and spatial patterns in North America  

SciTech Connect (OSTI)

The focus of this report is on North American wet deposition temporal patterns from 1979 to 1988 and spatial patterns for 1988. It is the third in a series of reports that investigate the patterns of annual precipitation-weighted average concentration and annual deposition for nine ion species: hydrogen, sulfate, nitrate, ammonium, calcium, chloride, sodium, potassium, and magnesium. Mosaic maps, based on surface estimation using kriging, display concentration and deposition spatial patterns of pH, hydrogen, sulfate, nitrate, ammonium, and calcium ion species for 1988 annual, winter, and summer periods. Temporal pattern analyses use a subset of 35 sites over a 10-year (1979--1988) period and an expanded subset of 137 sites, with greater spatial coverage, over a 7-year (1982--1988) period. The 10-year period represents the longest period with wet deposition monitoring data available that has a sufficient number of sites with data of known quality to allow a descriptive summary of annual temporal patterns. Sen`s median trend estimate and Kendall`s seasonal tau (KST) test are calculated for each ion species concentration and deposition at each site in both subsets.

Simpson, J.C.; Olsen, A.R.; Bittner, E.A.

1992-03-01T23:59:59.000Z

470

Optimal piezo-electro-mechanical coupling to control plate vibrations  

E-Print Network [OSTI]

A new way of coupling electrical and mechanical waves, using piezoelectric effect, is presented here. Since the energy exchange between two systems supporting wave propagation is maximum when their evolution is governed by similar equations, hence, an optimal electromechanical coupling is obtained by designing an electric network which is "analog" to the mechanical structure to be controlled. In this paper, we exploit this idea to enhance the coupling, between a Kirchhoff-Love plate and one possible synthesis of its circuital analog, as obtained by means of a set of piezoelectric actuators uniformly distributed upon the plate. It is shown how this approach allows for an optimal energy exchange between the mechanic and the electric forms independent of the modal evolution of the structure. Moreover, we show how an efficient electric dissipation of the mechanical energy can be obtained adding dissipative elements in the electric network.

S. Alessandroni; F. dell'Isola; F. Frezza

2010-08-30T23:59:59.000Z

471

Council on East Asian Libraries Statistics 1998-1999 For North American Institutions [Revised  

E-Print Network [OSTI]

Council on East Asian Libraries (CEAL) 1998-1999 annual statistical data. Revised. Data collected include volumes held, volumes added gross, serials, other materials, expenditures, staffing, and user services.

Doll, Vickie; Simpson, Fung-yin Kuo

2000-10-01T23:59:59.000Z

472

Council on East Asian Libraries Statistics 2011-2012: For North American Institutions  

E-Print Network [OSTI]

Council on East Asian Libraries (CEAL) 2011-2012 annual statistical data. Data collected include volumes held, volumes added gross, serials, e-journals, other materials, electronic resources, ebooks, expenditures, staffing, ...

Doll, Vickie; Hsu, Calvin; Liu, Wen-ling

2013-02-01T23:59:59.000Z

473

Proceedings of NAWTEC16 16th Annual North American Waste-to-Energy Conference  

E-Print Network [OSTI]

) INDIA Perinaz Bhada Nickolas .J. Themelis, Department of Earth and Environmental Engineering, and Earth Engineering Center, Columbia University, New York, NY 10027 ABSTRACT The city of Mumbai (Bombay), India for landfilling. When the present waste dumps were constructed they were at the outskirts of the city, but now

Columbia University

474

Evaluation of Continental and Site Terrestrial Carbon Cycle Simulations with North American Flux Tower Observations  

E-Print Network [OSTI]

extracts of photosynthesis (GPP), total respiration (Re) and NEE (net ecosystem exchange) at annual. The models range from -50% to +50% of the observations, and are centered near a bias of zero. The Can. 1st order, w/N 1st order 1st order, w/N zero order 1st order, w/N 1st order, w/N zero order VEGAS2

475

J. Geomag. Geoelectr., 45, 985999, 1993 Occam's Inversion and the North American  

E-Print Network [OSTI]

Electrical Anomaly Catherine deGroot-Hedlin and Steven Constable Institute of Geophysics and PlanetaryGroot-Hedlin and Steven Constable anomaly may be interpreted as a two-dimensional (2D) feature to a first approximation) using the Occam's inversion algorithm of Constable, Parker and Constable (1987), modified for 2D MT

Constable, Steve

476

A Downburst Study of the 29-30 June 2012 North American Derecho Kenneth L. Pryor  

E-Print Network [OSTI]

in the generation of enhanced severe winds, especially over the Washington, DC metropolitan areas. This comparison. These downburst clusters produced concentrated areas of significant severe winds associated with the DCS. Note produced widespread significant severe winds (> 65 knots) over northern Virginia and the Washington, DC

Kuligowski, Bob

477

The North American SynchroPhasor Initiative (NASPI) is a collaboration  

Energy Savers [EERE]

is contributing to the development of secure, high- speed, time-synchronized data about bulk power system conditions. This requires infrastructure development, including phasor...

478

Council on East Asian Libraries Statistics 1999-2000 For North American Institutions  

E-Print Network [OSTI]

cac6 CTD 4573 h 8 0 8 7437 rCTf C 4296 M 00 o 0863 io 0 fO 1431 CTt 8040 Q 0y 2165 tnD 75 50 8627 tst tsi cst f0o 0105 tf0 0921 Mt 1485 m 09v W n n w 724 i CM r 8504 7164 0551 ulm 0F 8936 0oi OT 9 6CTi iw im 4353 ot 3437716 1 T 2584573 T 6 7407437 1 ii... T oo 161 01 O 1772 t- s h- a M 4323 MtmCT 0 4978 CT 4490 0W 7447 tf r- o r 0616ai 0344 CT tr 4792 1792 21792 ME 3600 td 00 7340 00 t 1445 r 0Q 5919 0oi 1231 M w 0716 I 1 0o 1233 wtm 0892 cm0 0 Q 6249633 3436111 0o 7758285 cp 8983205 rt 6487781 f 2585336...

Doll, Vickie; Simpson, Fung-yin Kuo

2001-02-01T23:59:59.000Z

479

Environmental implications of trade liberalization on North American transport services: the case of the trucking sector  

E-Print Network [OSTI]

drayage ?eet is older. Line-haul trucks in the US and Mexicoacross the border. Line-haul trucks then pick up theand older than line-haul trucks and tend to produce higher

Fernandez, Linda

2010-01-01T23:59:59.000Z

480

New U. S. gas lines will restructure North American grid flows  

SciTech Connect (OSTI)

This paper reports that completion of several major U.S. natural-gas pipeline projects will significantly change relationships among suppliers, buyers, and transporters; alter pipeline flows and tariffs; and affect producer economics. The competitive and regulatory environment of the natural-gas industry continues to change under great uncertainty. Within this rapidly changing environment, many long-discussed but often-delayed pipeline projects are nearing or have entered the construction phase. These projects represent more than 5 bcf/day (bcfd) of capacity targeting three major markets that now consume an average of 23 bcfd.

Spiegel, E.; Johnson, E. Jr. (Booz-Allen and Hamilton Inc., Dallas, TX (US)); Viscio, A.

1990-12-10T23:59:59.000Z

Note: This page contains sample records for the topic "north american plate" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Investigating the Linear and Nonlinear Stationary Wave Response to Anomalous North American Snow Cover  

E-Print Network [OSTI]

on monthly-to-intraseasonal time scales, with the potential to modify local and remote atmospheric diagnose a deep, snow-induced, tropospheric cooling over NA and hypothesize that this may represent that diabatic cooling is the primary driver of the stationary wave response. In particular, the total nonlinear

482

Trends in North American net primary productivity derived from satellite observations, 1982-1998  

E-Print Network [OSTI]

and solar radiation (dotted curve). Bottom panel in eachand solar radiation (dotted curve). Bottom panel in eachpanel of each plot we show mean monthly trends in d, NDVI, and solar

2002-01-01T23:59:59.000Z

483

Populations of North American bean thrips, Caliothrips fasciatus (Pergande) (Thysanoptera : Thripidae : Panchaetothripinae) not detected in Australia  

E-Print Network [OSTI]

host plant table. REFERENCES Australia Phyto Requirements.2005. Country Australia. Commodity Citrus. Available from13 August 2004. Gold Coast, Australia. Morse JG & Hoddle MS.

Hoddle, M S; Stosic, C D; Mound, L A

2006-01-01T23:59:59.000Z

484

Council on East Asian Libraries Statistics 2001-2002 For North American Institutions  

E-Print Network [OSTI]

198627 CT r- t CN r i0 483414n 105794 0 806179 00o id01 10802900 445702 m r r CT 114244 Tt- m 592107 c 05 731096ycoe r t- co543791r 125408 cni- oio M ID t1037411 308186 0OT 2307560rt CM 201460 0tcooCMi- tor 0v 222283 arsirsi ci CM 0 0 0 0 CT 0 r 0 0 0 0 0...cri 116420c 3 64230M 63339cy 10915CTt- m64357vo amzJPNQ 0 0T CNCM T- COT T- COT OO00 IO10CM UM 00 0TTO t 0mCM CMT- CMm 0t CMN C CMt T-CO 0 0 3 0t- toco30 2 0 emte mTT- CTio cdT 01cn cl0 t0 0r 00r rr r v hoyb0r- oi4991T 021r icm CT 0m ircm 0 Nm tt- m...

Doll, Vickie; Simpson, Fung-yin Kuo

2003-02-01T23:59:59.000Z

485

Revision and Phylogenetic Analysis of the North American Antlion Genus Paranthaclisis Banks (Neuroptera: Myrmeleontidae)  

E-Print Network [OSTI]

: Emery, Garfield, Grand, Juab, Kane, Salt Lake, San Juan, Uintah, Washington; Washington: Benton, Chelan, Douglas, Grant, Okanogan; Wyoming [New State Record]: Park or Teton (Yellowstone Park). MEXICO: Baja California [Norte]: Ensenada, Mexicali...

Diehl, Benjamin

2012-10-19T23:59:59.000Z

486

The literary representation of certain Spanish castaways who lived among the North American Indians  

E-Print Network [OSTI]

Aguilar no en un tono demoniaco sino en terminos humanos. Guerrero se dirige a Aguilar corno un espafiol igual a el cuando dice 23 ?Hermano Aguilar? a pesar de sus posiciones sociales desiguales entre los mayas. Guerrero tambien le desea bien cuando... culturales entre Guerrero y Aguilar, pero el conflicto nunca se resuelve. Diaz del Castillo simplemente presenta tres imagenes de Guerrero ? el ser humano, el demonio amenazante y el demonio rechazado ? y nunca valora una representacion sobre las otras...

Protheroe, Mark Douglas

1996-01-01T23:59:59.000Z

487

North American climate of the last millennium: Underground temperatures and model comparison  

E-Print Network [OSTI]

. The gridded output from the three distinct integrations of the GCM ECHO-g were similarly averaged by region, the externally forced runs from ECHO-g are in better agreement with underground temperature anomalies than with the control run, suggesting that boreholes are sensitive to external forcing. Not only do ECHO-g simulations

Beltrami, Hugo

488

Mapping of North American methane emissions with high spatial resolution by inversion  

E-Print Network [OSTI]

, 2 Jet Propulsion Laboratory/California Institute of Technology, Pasadena, California, USA, 3 and biofuel burning. Wetlands are the largest natural source. The magnitude of global methane emissions

Jacob, Daniel J.

489

Environmental implications of trade liberalization on North American transport services: the case of the trucking sector  

E-Print Network [OSTI]

Mexico Border Port of Laredo Concentration year pollution,air pollution. In Table 2, for NO x on the USMexico border,

Fernandez, Linda

2010-01-01T23:59:59.000Z

490

Ecological Aspects of the Diversity Dynamics of North American Fossil Mammals  

E-Print Network [OSTI]

scenario, size-biased species extinction risk since the lateextrapolation of species extinction risk across phylogeneticand threaten species with extinction (McKinney, 1997;

Tomiya, Susumu

2012-01-01T23:59:59.000Z

491

E-Print Network 3.0 - aboriginal north americans Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

are recognized in the Constitution Act. Scholars have argued that ... Source: Saskatchewan, University of - Department of Physics and Engineering Physics, Plasma Physics...

492

Carsharing Parking Policy: A Review of North American Practices and San Francisco Bay Area Case Study  

E-Print Network [OSTI]

Selects Zipcar to Provide Car-Sharing Services. June 11,Can You Give Up Your Car? New Auto-Sharing Services Bet That

Shaheen, Susan; Cohen, Adam P.; Martin, Elliot

2010-01-01T23:59:59.000Z

493

VOL. 6, NO. 1 HVAC&R RESEARCH JANUARY 2000 Qualitative Comparison of North American and  

E-Print Network [OSTI]

Calculation of design cooling and heating loads is an essential task in the design of HVAC systems and has societies publish methods for calculating design cooling and heating load calculations in their handbooks.K. Cooling Load Calculation Methods Simon J. Rees, Ph.D Jeffrey D. Spitler, Ph.D., P.E. Member ASHRAE Member

494

The archive of place : environment and the contested past of a North American plateau  

E-Print Network [OSTI]

This is a study of the role that the interpretation of material evidence plays in historical consciousness and social memory. It consists of three case studies from the Chilcotin Plateau in the west-central part of present-day ...

Turkel, William Joseph, 1967-

2004-01-01T23:59:59.000Z

495

Populations of North American bean thrips, Caliothrips fasciatus (Pergande) (Thysanoptera : Thripidae : Panchaetothripinae) not detected in Australia  

E-Print Network [OSTI]

Vic. , Victoria; WA, Western Australia. Journal compilationSouth Australia and Western Australia to determine whetherGordon) at Perth (Western Australia) Domestic Airport, and

Hoddle, M S; Stosic, C D; Mound, L A

2006-01-01T23:59:59.000Z

496

From Made in America to Hecho en Sinaloa: A Historical Geography of North American Methamphetamine Networks  

E-Print Network [OSTI]

.3: Methamphetamine trafficking routes identified in the National Drug Threat Assessment: 2011 152 Figure 44: Methamphetamine lab seizures in Mexico 153 Figure 4.5: Seizures by... Disorder in children and adults, as well as for narcolepsy (Covey 2007a). On the street, methamphetamine assumes another life. The volume of its sales increases tremendously...

Gilbreath, Aaron Hastings

2012-08-31T23:59:59.000Z

497

The North American Free Trade Agreement: A Legal Analysis of Effects and Opportunities  

E-Print Network [OSTI]

Exploration As a service to PEMEX, the Mexican government'sU.S. $250,000 offered by PEMEX; that figure will rise to 70will be required to use PEMEX union workers. Cross-Border

Steinberg, Richard

1994-01-01T23:59:59.000Z

498

Salmon fishing boats of the North American Pacific Coast in the era of oar and sail  

E-Print Network [OSTI]

capitalization of the fishery, concentration of power and influence into the hands of a few industrialists, and a standardization of the modes of production. Boat-builders responded with a "stock" boat, the Columbia River Sailing Gillnetter. As this type...

Moore, Charles David

1993-01-01T23:59:59.000Z

499

Total observed organic carbon (TOOC) in the atmosphere: a synthesis of North American observations  

E-Print Network [OSTI]

R. J. , Sullivan, A. P. , Peltier, R. E. , Atlas, E. L. , deB. M. , Middlebrook, A. M. , Peltier, R. E. , Sullivan, A. ,R. J. , Sullivan, A. P. , Peltier, R. E. , et al. : A study

2008-01-01T23:59:59.000Z

500

Supporting Online Material Nitrogen dynamics following field application of biochar in a temperate North American  

E-Print Network [OSTI]

Leachate outletAir outlet Lysimeter 0.3 m Bottle Fig. S1 Schematic of lysimeter placement and leachate.76 y = 4.66x - 24.3 r 2 = 0.30 Fig. S2 Adsorption isotherm for DON with and without 12 t ha-1 biochar

Lehmann, Johannes