National Library of Energy BETA

Sample records for noncrystalline internal atomic

  1. International Atomic Energy Agency | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration International Atomic Energy Agency Secretary Moniz awards Hutcheon memorial nonproliferation fellowship to Thomas Gray Energy Secretary Ernest Moniz (second from bottom left, clockwise) and Anne Harrington, NNSA deputy administrator for Defense Nuclear Nonproliferation (sitting next to Moniz), discuss Ian Hutcheon's legacy with his wife Nancy (across from Harrington) and daughter Dana Hutcheon Gordon. Energy... DOE/NNSA's Nonproliferation Experts Lead First Workshop on the

  2. Secretary Chu Addresses the International Atomic Energy Agency General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conference | Department of Energy Addresses the International Atomic Energy Agency General Conference Secretary Chu Addresses the International Atomic Energy Agency General Conference September 20, 2010 - 12:00am Addthis Washington, DC - U.S. Energy Secretary Steven Chu addressed the International Atomic Energy Agency's 54th General Conference today in Vienna. His prepared remarks are below: Thank you, Ambassador Enkhsaikhan. Congratulations on your election as President of this Conference.

  3. International Atomic Energy Agency Feed | Open Energy Information

    Open Energy Info (EERE)

    Institute (WRI) World Watch Institute International Atomic Energy Agency Feed Nuclear Safety is a Continuum, not a Final Destination

    "There's this continuum with regard...

  4. International Atomic Energy Agency holds conference on fusion roadmap |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Princeton Plasma Physics Lab International Atomic Energy Agency holds conference on fusion roadmap By John Greenwald November 8, 2012 Tweet Widget Google Plus One Share on Facebook Hutch Neilson, third from left, chaired the four-day International Atomic Energy Agency Conference at the University of California at Los Angeles in mid-October, which drew 70 participants from 16 countries and international groups. Pictured here from left to right are Keeman Kim, National Fusion Research

  5. Safeguards Agreement and Protocol with the International Atomic Energy Agency

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-01-07

    To ensure that DOE complies with the Agreement Between the United States of America and the International Atomic Energy Agency for the Application of Safeguards in the United States, the Protocol to the Agreement, and the subsidiary arrangements to the Agreement. Canceled by DOE O 142.2A. Cancels DOE 1270.2B.

  6. International Atomic Energy Agency - General Session | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - General Session International Atomic Energy Agency - General Session September 18, 2006 - 8:53am Addthis Prepared Remarks for Energy Secretary Samuel Bodman Thank you Director General ElBaradei. Congratulations to Mr. Abdul Samad Minty on your election as President of this, the 50th IAEA General Conference. President George W. Bush sends a letter wishing us a productive conference. Let me draw from his message: "My Administration has announced a bold new proposal called the Global Nuclear

  7. Secretary Moniz's Remarks at the 2015 International Atomic Energy Agency (IAEA) General Conference-- As Prepared

    Broader source: Energy.gov [DOE]

    Secretary Moniz delivered these remarks to the Plenary Session of the 2015 International Atomic Energy Agency (IAEA) General Conference.

  8. Validation of International Atomic Energy Agency Equipment Performance Requirements

    SciTech Connect (OSTI)

    Chiaro, PJ

    2004-02-17

    Performance requirements and testing protocols are needed to ensure that equipment used by the International Atomic Energy Agency (IAEA) is reliable. Oak Ridge National Laboratory (ORNL), through the US Support Program, tested equipment to validate performance requirements protocols used by the IAEA for the subject equipment categories. Performance protocol validation tests were performed in the Environmental Effects Laboratory in the categories for battery, DC power supply, and uninterruptible power supply (UPS). Specific test results for each piece of equipment used in the validation process are included in this report.

  9. Proposal for the International Atomic Energy Agency Training Course

    SciTech Connect (OSTI)

    McCarthy, T.L.

    1994-06-01

    The Hanford Site has hosted similar activities, including both Hanford Summits I and II. The Hanford Summits were two-day televised events to discuss the commitment of the current Presidential administration to the environmental restoration of the Hanford Site. Public involvement and strategic issues established from Hanford Summit I include: Regulatory issues, training and education, economic development and partnership, and technology transfer. Hanford Summit II provided a summary of how Secretary of Energy O`Leary is proceeding on the above strategic issues. The DOE and Westinghouse School for Environmental Excellence frequently offers a six-week course for environmental professionals and workers. Approximately thirty to forty individuals attend the training course, which provides training in environmental regulation compliance. The Hanford Site has hosted two previous International Atomic Energy Agency training courses. The courses lasted two weeks and had approximately eight to ten participants. Nuclear Material Management and Neutron Monitoring were the courses hosted by the Hanford Site.

  10. U.S. Energy Secretary Addresses International Atomic Energy Agency General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conference | Department of Energy Addresses International Atomic Energy Agency General Conference U.S. Energy Secretary Addresses International Atomic Energy Agency General Conference September 19, 2011 - 4:48pm Addthis VIENNA, AUSTRIA - U.S. Energy Secretary Steven Chu addressed the International Atomic Energy Agency's General Conference today in Vienna. Opening with a message from President Barack Obama, Secretary Chu highlighted the importance of safety and security in the nuclear

  11. U.S. Energy Secretary Addresses International Atomic Energy Agency General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conference | Department of Energy Energy Secretary Addresses International Atomic Energy Agency General Conference U.S. Energy Secretary Addresses International Atomic Energy Agency General Conference September 19, 2011 - 2:24pm Addthis VIENNA, AUSTRIA - U.S. Energy Secretary Steven Chu addressed the International Atomic Energy Agency's General Conference today in Vienna. Opening with a message from President Barack Obama, Secretary Chu highlighted the importance of safety and security in

  12. Thirteenth International Conference on Atomic Physics(IGAP-13)

    SciTech Connect (OSTI)

    Walther, H.; Haensch, T.W.; Neizert, B. (eds.) (Max PlanckInstitute for Quantum Optics, Garching (Germany) Ludwig MaximilianUniversity, Munich (Germany))

    1993-01-01

    This conference proceeding contains invited papers on recentprogress in many subfields of atomic physics. Major advances inspectroscopy, laser cooling and trapping, atom interferometry,cavity quantum electrodynamics are discussed in many of thepresented papers. Quantum chaos is explored as well as novelexperiments with atoms in intense laser fields are discussed. Atotal of forty two papers are given in this proceedings, out ofthese, eleven have been abstracted for database. (AIP)

  13. Safety Series No. 75-INSAG-4, Safety Culture: A report by the International Nuclear Safety Advisory Group, International Atomic Energy Agency

    Broader source: Energy.gov [DOE]

    Safety Series No. 75-INSAG-4, Safety Culture: A report by the International Nuclear Safety Advisory Group, International Atomic Energy Agency, IAEA, 1991

  14. Alternate Funding Sources for the International Atomic Energy Agency

    SciTech Connect (OSTI)

    Toomey, Christopher; Wyse, Evan T.; Kurzrok, Andrew J.; Swarthout, Jordan M.

    2012-09-04

    Since 1957, the International Atomic Energy Agency (IAEA) has worked to ensure the safe and responsible promotion of nuclear technology throughout the world. The IAEA operates at the intersection of the Nuclear Nonproliferation Treaty’s (NPT) fourth and third articles, which guarantee Parties to the Treaty the right to peaceful uses of nuclear technology, provided those activities are placed under safeguards verified by the IAEA. However, while the IAEA has enjoyed substantial success and prestige in the international community, there is a concern that its resources are being stretched to a point where it may no longer be possible to execute its multifaceted mission in its entirety. As noted by the Director General (DG) in 2008, demographics suggest that every aspect of the IAEA’s operations will be in higher demand due to increasing reliance on non-carbon-based energy and the concomitant nonproliferation, safety, and security risks that growth entails. In addition to these nuclear energy concerns, the demand for technical developmental assistance in the fields of food security, resource conservation, and human health is also predicted to increase as the rest of the world develops. Even with a 100% value-for-money rating by the U.S. Office of Management and Budget (OMB) and being described as an “extraordinary bargain” by the United Nations Secretary-General’s High-level Panel on Threats, Challenges and Change, real budget growth at the Agency has been limited to zero-real growth for a better part of the last two decades. Although the 2012 regular budget (RB) received a small increase for most programs, the 2013 RB has been set at zero-real growth. As a result, the IAEA has had to defer infrastructure investments, which has hindered its ability to provide the public goods its Members seek, decreased global security and development opportunities, and functionally transformed the IAEA into a charity, dependent on extrabudgetary (EB) contributions to sustain

  15. International Atomic Energy Agency (IAEA) | Open Energy Information

    Open Energy Info (EERE)

    Programs 4 References About "The IAEA is the worlds center of cooperation in the nuclear field. It was set up as the worlds "Atoms for Peace" organization in 1957 within...

  16. International Atomic Energy Agency (IAEA) | Open Energy Information

    Open Energy Info (EERE)

    Sustainable Development (WPISD). Partners include the OECD International Energy Agency (IEA), UN Department of Economic and Social Affairs (DESA), Eurostat, and the European...

  17. Safety Reports Series No. 11, Developing Safety Culture in Nuclear Activities: Practical Suggestions to Assist Progress, International Atomic Energy Agency

    Broader source: Energy.gov [DOE]

    Safety Reports Series No. 11, Developing Safety Culture in Nuclear Activities: Practical Suggestions to Assist Progress, International Atomic Energy Agency

  18. News Release: Energy Department and International Atomic Energy...

    Office of Environmental Management (EM)

    Contractor, Judy Miller, S.M. Stoller Corporation Public Affairs (970) 248-6363 judy.miller@lm.doe.gov GRAND JUNCTION, Colo. - The U.S. Department of Energy and the International ...

  19. Materials Properties at Internal Interfaces: Fundamental Atomic Issues

    SciTech Connect (OSTI)

    Browning, Nigel

    2014-09-12

    During the course of this research, the microscopy methods were applied to many different systems (see publication list). However, the work can be broadly classified into three main areas: the statistical distribution of grain boundary structures under different doping conditions, the identification of individual dopant atoms in oxide materials, and the evaluation of nucleation and growth processes in liquid and more recently. The main results from each of these efforts will be discussed in the final report.

  20. International Atomic Energy Agency General Conference | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy 29, 2008 - 3:43pm Addthis Remarks as Prepared for Secretary Bodman Thank you, Mr. President. Congratulations on your selection as President of this, the 52nd General Conference. And I again extend my thanks and appreciation to Dr. El Baradei for his leadership as the IAEA's Director General. Mr. President, for a half century the IAEA has led the international effort to make nuclear power safe for the world. Though we have made significant progress in that regard, a great deal of work

  1. Voluntary Offer Safeguards Agreement and Additional Protocol with the International Atomic Energy Agency

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-12-15

    The Order defines requirements for Department of Energy (DOE) compliance with the Agreement between the United States of America and the International Atomic Energy Agency for the Application of Safeguards in the United States, the Protocol to the Agreement, the Additional Protocol to the Agreement, and the Subsidiary Arrangements to the Agreement and Additional Protocol. Cancels DOE O 142.2. Admin Chg 1, 6-27-13.

  2. Voluntary Offer Safeguards Agreement and Additional Protocol with the International Atomic Energy Agency

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-12-15

    The Order defines requirements for Department of Energy (DOE) compliance with the Agreement between the United States of America and the International Atomic Energy Agency for the Application of Safeguards in the United States, the Protocol to the Agreement, the Additional Protocol to the Agreement, and the Subsidiary Arrangements to the Agreement and Additional Protocol. Supersedes DOE O 142.2. Admin Chg 1, dated 6-27-13, Supersedes DOE O 142.1A. Certified 12-3-14.

  3. Topography and Mechanical Property Mapping of International Simple Glass Surfaces with Atomic Force Microscopy

    SciTech Connect (OSTI)

    Pierce, Eric M

    2014-01-01

    Quantitative Nanomechanical Peak Force (PF-QNM) TappingModeTM atomic force microscopy measurements are presented for the first time on polished glass surfaces. The PF-QNM technique allows for topography and mechanical property information to be measured simultaneously at each pixel. Results for the international simple glass which represents a simplified version of SON68 glass suggests an average Young s modulus of 78.8 15.1 GPa is within the experimental error of the modulus measured for SON68 glass (83.6 2 GPa) with conventional approaches. Application of the PF-QNM technique will be extended to in situ glass corrosion experiments with the goal of gaining atomic-scale insights into altered layer development by exploiting the mechanical property differences that exist between silica gel (e.g., altered layer) and pristine glass surface.

  4. Sixteenth International Conference on the physics of electronic and atomic collisions

    SciTech Connect (OSTI)

    Dalgarno, A.; Freund, R.S.; Lubell, M.S.; Lucatorto, T.B.

    1989-01-01

    This report contains abstracts of papers on the following topics: photons, electron-atom collisions; electron-molecule collisions; electron-ion collisions; collisions involving exotic species; ion- atom collisions, ion-molecule or atom-molecule collisions; atom-atom collisions; ion-ion collisions; collisions involving rydberg atoms; field assisted collisions; collisions involving clusters and collisions involving condensed matter.

  5. Evaluation of the International Atomic Energy Agency (IAEA) Safeguards Analytical Laboratory quality assurance program

    SciTech Connect (OSTI)

    Pietri, C.E.; Bracey, J.T.

    1985-02-01

    Destructive analysis is used by the International Atomic Energy Agency (IAEA) through its Safeguards Analytical Laboratory (SAL) to verify, in part, the inventory of nuclear materials at nuclear facilities. The reliability and quality of these meassurements must be assured in a systematic manner. The Division of Safeguards Evaluation, IAEA, required assistance in developing and implementing the quality assurance measures for the analytical procedures used in the destructive analysis of these safeguards samples. To meet these needs an ISPO POTAS Task D.53 was instituted in which consultants would review with IAEA staff the procedures used (or proposed) at SAL for the destructive analysis of safeguards samples and the statistical evaluation of the resulting measurement data at Headquarters. The procedures included analytical methods, qualtiy control measures, and the treatment of data from these activities. Based on this review, modifications to the system, if required, would be recommended which would provide routine assurance to management that these procedures are functioning properly to achieve safeguards objectives. In the course of this review, the sample handling procedures, measurement control activities, analytical methods, reference materials, calibration procedures, statistical analysis of data, and data management system were studied and evaluated. The degree to which SAL (as a total system) achieved laboratory quality assurance was assessed by comparison to accepted standards of quality assurance. 22 refs., 1 fig.

  6. INTERNATIONAL ATOMIC ENERGY AGENCY (IAEA) SAFEGUARDS DURING STABILIZATION AT HANFORD PLUTONIUM FINISHING PLANT (PFP)

    SciTech Connect (OSTI)

    MCRAE, L.P.

    2004-06-30

    The Vault at the Plutonium Finishing Plan (PFP) became subject to the International Atomic Energy Agency (IAEA) safeguards beginning in 1994 as part of the US excess fissile material program. The inventory needed to be stabilized and repackaged for long-term storage to comply with Defense Nuclear Facility Safety Board Recommendation 94-1. In 1998, the United States began negotiations with IAEA to develop methods to maintain safeguards during stabilization and repackaging of this material. The Design Information Questionnaire was revised and submitted to the IAEA in 2002 describing modification to the facility to accommodate the stabilization process line. The operation plan for 2003 was submitted describing the proposed schedules for removing materials for stabilization. Stabilization and repackaging activities for the safeguarded plutonium began in January 2003 and were completed in December 2003. The stabilization was completed in five phases. IAEA containment and surveillance measures were maintained until the material was removed by phase for stabilization and repackaging. Following placement of the repackaged material into the storage vault, the IAEA conducted inventory change verification measurements, and re-established containment and surveillance. Plant activities and the impacts on operations are described.

  7. Updated Mortality Analysis of Radiation Workers at Rocketdyne (Atomics International), 1948-2008

    SciTech Connect (OSTI)

    Boice Jr JD, Colen SS, Mumma MT, Ellis ED, Eckerman DF, Leggett RW, Boecker BB, Brill B, Henderson BE

    2011-08-01

    Updated analyses of mortality data are presented on 46,970 workers employed 1948-1999 at Rocketdyne (Atomics International). Overall, 5,801 workers were involved in radiation activities, including 2,232 who were monitored for intakes of radionuclides, and 41,169 workers were engaged in rocket testing or other non-radiation activities. The worker population is unique in that lifetime occupational doses from all places of employment were sought, updated and incorporated into the analyses. Further, radiation doses from intakes of 14 different radionuclides were calculated for 16 organs or tissues using biokinetic models of the International Commission on Radiation Protection (ICRP). Because only negligible exposures were received by the 247 workers monitored for radiation activities after 1999, the mean dose from external radiation remained essentially the same at 13.5 mSv (maximum 1 Sv) as reported previously, as did the mean lung dose from external and internal radiation combined at 19.0 mSv (maximum 3.6 Sv). An additional 9 years of follow-up, from December 31,1999 through 2008, increased the person-years of observation for the radiation workers by 21.7% to 196,674 (mean 33.9 years) and the number of cancer deaths by 50% to 684. Analyses included external comparisons with the general population and the computation of standardized mortality ratios (SMRs) and internal comparisons using proportional hazards models and the computation of relative risks (RRs). A low SMR for all causes of death (SMR 0.82; 95% CI 0.78-0.85) continued to indicate that the Rocketdyne radiation workers were healthier than the general population and were less likely to die. The SMRs for all cancers taken together (SMR 0.88; 95% CI 0.81-0.95), lung cancer (SMR 0.87; 95% CI 0.76-1.00) and leukemia other than chronic lymphocytic leukemia (CLL) (SMR 1.04; 95% 0.67-1.53) were not significantly elevated. Cox regression analyses revealed no significant dose-response trends for any cancer. For all

  8. Nuclear nonproliferation and safety: Challenges facing the International Atomic Energy Agency

    SciTech Connect (OSTI)

    Not Available

    1993-09-01

    The Chairman of the Senate Committee on Govermental Affairs asked the United States General Accounting Office (GAO) to review the safeguards and nuclear power plant safety programs of the International Atomic Energy Agency (IAEA). This report examines (1) the effectiveness of IAEA`s safeguards program and the adequacy of program funding, (2) the management of U.S. technical assistance to the IAEA`s safeguards program, and (3) the effectiveness of IAEA`s program for advising United Nations (UN) member states about nuclear power plant safety and the adequacy of program funding. Under its statute and the Treaty on the Non-Proliferation of Nuclear Weapons, IAEA is mandated to administer safeguards to detect diversions of significant quantities of nuclear material from peaceful uses. Because of limits on budget growth and unpaid contributions, IAEA has had difficulty funding the safeguards program. IAEA also conducts inspections of facilities or locations containing declared nuclear material, and manages a program for reviewing the operational safety of designated nuclear power plants. The U.S. technical assistance program for IAEA safeguards, overseen by an interagency coordinating committee, has enhanced the agency`s inspection capabilities, however, some weaknesses still exist. Despite financial limitations, IAEA is meeting its basic safety advisory responsibilities for advising UN member states on nuclear safety and providing requested safety services. However, IAEA`s program for reviewing the operational safety of nuclear power plants has not been fully effective because the program is voluntary and UN member states have not requested IAEA`s review of all nuclear reactors with serious problems. GAO believes that IAEA should have more discretion in selecting reactors for review.

  9. The Role of Atomic Energy in the Promotion of International Collaboration

    DOE R&D Accomplishments [OSTI]

    Rabi, I. I.

    1959-10-31

    A brief survey is presented of the international cooperation which made a success of the First Geneva Conference and which has initiated many international scientific meetings since that time. The policy of the United States in this respect is discussed. (J.S.R.)

  10. Manual for Implementation of the Voluntary Offer Safeguards Agreement and Additional Protocol with the International Atomic Energy Agency

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1998-06-12

    This Manual provides detailed information for implementing the requirements of DOE O 142.2A, dated 12-15-06; the Agreement Between the United States of America and the International Atomic Energy Agency (IAEA) for the Application of Safeguards in the United States; the Original Protocol to the Agreement; the Additional Protocol to the Agreement signed by the United States and the IAEA on June 12, 1998; and the Interagency Procedures for the Implementation of the U.S.-IAEA Safeguards Agreement. No cancellation. Admin Chg 1, 6-27-13

  11. Manual for Implementation of the Voluntary Offer Safeguards Agreement and Additional Protocol with the International Atomic Energy Agency

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1998-06-12

    This Manual provides detailed information for implementing the requirements of DOE O 142.2A, dated 12-15-06; the Agreement Between the United States of America and the International Atomic Energy Agency (IAEA) for the Application of Safeguards in the United States; the Original Protocol to the Agreement; the Additional Protocol to the Agreement signed by the United States and the IAEA on June 12, 1998; and the Interagency Procedures for the Implementation of the U.S.-IAEA Safeguards Agreement. No cancellation. Admin Chg 1, dated 6-27-13, supersedes DOE M 142.2-1. Certified 12-3-14.

  12. Using research metrics to evaluate the International Atomic Energy Agency guidelines on quality assurance for R&D

    SciTech Connect (OSTI)

    Bodnarczuk, M.

    1994-06-01

    The objective of the International Atomic Energy Agency (IAEA) Guidelines on Quality Assurance for R&D is to provide guidance for developing quality assurance (QA) programs for R&D work on items, services, and processes important to safety, and to support the siting, design, construction, commissioning, operation, and decommissioning of nuclear facilities. The standard approach to writing papers describing new quality guidelines documents is to present a descriptive overview of the contents of the document. I will depart from this approach. Instead, I will first discuss a conceptual framework of metrics for evaluating and improving basic and applied experimental science as well as the associated role that quality management should play in understanding and implementing these metrics. I will conclude by evaluating how well the IAEA document addresses the metrics from this conceptual framework and the broader principles of quality management.

  13. Project planning at the Hanford Site for International Atomic Energy Agency (IAEA) safeguards of excess fissile material

    SciTech Connect (OSTI)

    Smith, B.W.; McRae, L.P.; Walker, A.C.

    1995-06-01

    In his September 1993 address to the United Nations General Assembly, President Clinton proposed several initiatives to promote nuclear nonproliferation. One element is of these initiatives was that the United States offered to place excess fissile material under International Atomic Energy Agency @A) safeguards. Three Department of Energy (DOE) facilities were identified as part of a phased approach for initial implementation. This paper describes the planning process used to provide information to assist the DOE in making decisions for the initial offer, outlines tasks to be performed, and develops a budget request. The process consisted of: (1) Characterizing the Hanford Site from the perspective of IAEA safeguards; (2) identify key issues to be resolved; (3) developing budget estimates and schedules; (4) interfacing with other DOE components and the IAEA to clarify expected activities; and (5) initiating additional data collection and preparatory activities to reduce planning uncertainties.

  14. August 18, 2015 Webinar- Probabilistic Analysis of Inadvertent Intrusion and the International Atomic Energy Agency Human Intrusion in the Context of Disposal of Radioactive Waste (HIDRA) Project

    Broader source: Energy.gov [DOE]

    P&RA CoP Webinar - August 18, 2015 - Probabilistic Analysis of Inadvertent Intrusion and the International Atomic Energy Agency Human Intrusion in the Context of Disposal of Radioactive Waste (HIDRA) Project, by Dr. Paul Black (Neptune) and Mr. Roger Seitz (Savannah River National Laboratory), August 18, 2015, 1:30 – 3:00 pm Eastern Daylight Time.

  15. International Atomic Energy Agency

    National Nuclear Security Administration (NNSA)

    1%2A en US, Kazakhstan Cooperate to Eliminate Highly Enriched Uranium http:nnsa.energy.govmediaroompressreleaseskazakhstan

  16. Microsoft PowerPoint - NMMSS Role in Preparing a New Facility for Reporting to the International Atomic Energy Agency_Gary Hirs

    National Nuclear Security Administration (NNSA)

    Role in Preparing a New Facility for Reporting to the International Atomic Energy Agency Gary Hirsch - NMMSS Purpose  This presentation covers the steps that NMMSS took to support the successful reporting to the IAEA by the U.S. Government for a new IAEA SELECT facility - LES owned and operated by URENCO USA  NMMSS reports import/export activity for ALL civilian nuclear materials to the IAEA  IAEA selected facilities have unique composition/facility code reporting requirements. 2

  17. Agreement Between The United States of America and The International Atomic Energy Agency for the Application of Safeguards in the United States

    National Nuclear Security Administration (NNSA)

    Agreement Between The United States of America and The International Atomic Energy Agency for the Application of Safeguards in the United States Signed at Vienna November 18, 1977 Ratification advised by U.S. Senate July 2, 1980 Ratified by U.S. President July 31, 1980 Entered into force December 9, 1980 Proclaimed by U.S. President December 31, 1980 Whereas the United States of America (hereinafter referred to as the "United States") is a Party to the Treaty on the Non-Proliferation

  18. International Atomic Energy Agency specialists meeting on experience in ageing, maintenance, and modernization of instrumentation and control systems for improving nuclear power plant availability

    SciTech Connect (OSTI)

    Not Available

    1993-10-01

    This report presents the proceedings of the Specialist`s Meeting on Experience in Aging, Maintenance and Modernization of Instrumentation and Control Systems for Improving Nuclear Power Plant Availability that was held at the Ramada Inn in Rockville, Maryland on May 5--7, 1993. The Meeting was presented in cooperation with the Electric Power Research Institute, Oak Ridge National Laboratory and the International Atomic Energy Agency. There were approximately 65 participants from 13 countries at the Meeting. Individual reports have been cataloged separately.

  19. A feasibility study for the application of radiation monitoring for international safeguards at an Atomic Vapor Laser Isotope Separation (AVLIS) facility

    SciTech Connect (OSTI)

    Miller, M.C.; Adams, E.L.; Li, T.K.; Strittmatter, R.B.

    1994-09-01

    The authors evaluated the feasibility of using radiation monitoring for international safeguards at an Atomic Vapor Laser Isotope Separation (AVLIS) uranium enrichment facility. Techniques employing neutron and gamma-ray detection were investigated and evaluated to determine their applicability for detecting highly enriched uranium. This task is complicated because classified information must not be revealed in the inspection activity. Within this constraint, the authors concluded that (1) neutron methods will not be a viable option for measurements at the separator module, (2) gamma-ray measurements at the separator module are possible but cannot be adequately verified, and (3) neutron and gamma-ray approaches are suitable for measurements of feed, product, and tails. If international safeguards are applied at an AVLIS facility, neutron and gamma-ray instruments will need to be designed and optimized.

  20. Environmental consequences of postulate plutonium releases from Atomics International's Nuclear Materials Development Facility (NMDF), Santa Susana, California, as a result of severe natural phenomena

    SciTech Connect (OSTI)

    Jamison, J.D.; Watson, E.C.

    1982-02-01

    Potential environmental consequences in terms of radiation dose to people are presented for postulated plutonium releases caused by severe natural phenomena at the Atomics International's Nuclear Materials Development Facility (NMDF), in the Santa Susana site, California. The severe natural phenomena considered are earthquakes, tornadoes, and high straight-line winds. Plutonium deposition values are given for significant locations around the site. All important potential exposure pathways are examined. The most likely 50-year committed dose equivalents are given for the maximum-exposed individual and the population within a 50-mile radius of the plant. The maximum plutonium deposition values likely to occur offsite are also given. The most likely calculated 50-year collective committed dose equivalents are all much lower than the collective dose equivalent expected from 50 years of exposure to natural background radiation and medical x-rays. The most likely maximum residual plutonium contamination estimated to be deposited offsite following the earthquake, and the 150-mph and 170-mph tornadoes are above the Environmental Protection Agency's (EPA) proposed guideline for plutonium in the general environment of 0.2 ..mu..Ci/m/sup 2/. The deposition values following the 110-mph and the 130-mph tornadoes are below the EPA proposed guideline.

  1. International Perspective on Fukushima Accident

    Broader source: Energy.gov [DOE]

    Presenter: Miroslav Lipár, Head, Operational Safety Section, Department of Nuclear Safety and Security, International Atomic Energy Agency

  2. Polarized internal target apparatus

    DOE Patents [OSTI]

    Holt, Roy J.

    1986-01-01

    A polarized internal target apparatus with a polarized gas target of improved polarization and density achieved by mixing target gas atoms with a small amount of alkali metal gas atoms, and passing a high intensity polarized light source into the mixture to cause the alkali metal gas atoms to become polarized which interact in spin exchange collisions with target gas atoms yielding polarized target gas atoms.

  3. Polarized internal target apparatus

    DOE Patents [OSTI]

    Holt, R.J.

    1984-10-10

    A polarized internal target apparatus with a polarized gas target of improved polarization and density (achieved by mixing target gas atoms with a small amount of alkali metal gas atoms, and passing a high intensity polarized light source into the mixture to cause the alkali metal gas atoms to become polarized which interact in spin exchange collisions with target gas atoms yielding polarized target gas atoms) is described.

  4. International Standards & Policy Development | National Nuclear...

    National Nuclear Security Administration (NNSA)

    and Nuclear Facilities off site link to better reflect the threat environment. NNSA also led the international effort to revise the International Atomic Energy Agency's off site...

  5. ATOM | NISAC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NISACATOM content top Network Optimization Models (RNAS and ATOM) Posted by Admin on Mar 1, 2012 in | Comments 0 comments Many critical infrastructures can be represented by a...

  6. NEAC International Subcommittee Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... for Peace Conference Room, 5A-118 1000 Independence Ave, SW Washington, DC 20585 11 DOE NEAC International Subcommittee Meeting October 29-30, 2015 Room 5A-118, Atoms for Peace ...

  7. Gauss Sum Factorization with Cold Atoms

    SciTech Connect (OSTI)

    Gilowski, M.; Wendrich, T.; Mueller, T.; Ertmer, W.; Rasel, E. M. [Institut fuer Quantenoptik, Leibniz Universitaet Hannover, Welfengarten 1, D-30167 Hannover (Germany); Jentsch, Ch. [Astrium GmbH-Satellites, 88039 Friedrichshafen (Germany); Schleich, W. P. [Institut fuer Quantenphysik, Universitaet Ulm, Albert-Einstein-Allee 11, D-89081 Ulm (Germany)

    2008-01-25

    We report the first implementation of a Gauss sum factorization algorithm by an internal state Ramsey interferometer using cold atoms. A sequence of appropriately designed light pulses interacts with an ensemble of cold rubidium atoms. The final population in the involved atomic levels determines a Gauss sum. With this technique we factor the number N=263193.

  8. Atom Interferometry

    ScienceCinema (OSTI)

    Mark Kasevich

    2010-01-08

    Atom de Broglie wave interferometry has emerged as a tool capable of addressing a diverse set of questions in gravitational and condensed matter physics, and as an enabling technology for advanced sensors in geodesy and navigation. This talk will review basic principles, then discuss recent applications and future directions. Scientific applications to be discussed include measurement of G (Newton?s constant), tests of the Equivalence Principle and post-Newtonian gravity, and study of the Kosterlitz-Thouless phase transition in layered superfluids. Technology applications include development of precision gryoscopes and gravity gradiometers. The talk will conclude with speculative remarks looking to the future: Can atom interference methods be sued to detect gravity waves? Can non-classical (entangled/squeezed state) atom sources lead to meaningful sensor performance improvements?

  9. Atom Interferometry

    SciTech Connect (OSTI)

    Mark Kasevich

    2008-05-07

    Atom de Broglie wave interferometry has emerged as a tool capable of addressing a diverse set of questions in gravitational and condensed matter physics, and as an enabling technology for advanced sensors in geodesy and navigation. This talk will review basic principles, then discuss recent applications and future directions. Scientific applications to be discussed include measurement of G (Newton’s constant), tests of the Equivalence Principle and post-Newtonian gravity, and study of the Kosterlitz-Thouless phase transition in layered superfluids. Technology applications include development of precision gryoscopes and gravity gradiometers. The talk will conclude with speculative remarks looking to the future: Can atom interference methods be sued to detect gravity waves? Can non-classical (entangled/squeezed state) atom sources lead to meaningful sensor performance improvements?

  10. Atomic Scale Characterization of Compound Semiconductors Using Atom Probe Tomography

    SciTech Connect (OSTI)

    Gorman, B. P.; Norman, A. G.; Lawrence, D.; Prosa, T.; Guthrey, H.; Al-Jassim, M.

    2011-01-01

    Internal interfaces are critical in determining the performance of III-V multijunction solar cells. Studying these interfaces with atomic resolution using a combination of transmission electron microscopy (TEM), atom probe tomography (APT), and density functional calculations enables a more fundamental understanding of carrier dynamics in photovoltaic (PV) device structures. To achieve full atomic scale spatial and chemical resolution, data acquisition parameters in laser pulsed APT must be carefully studied to eliminate surface diffusion. Atom probe data with minimized group V ion clustering and expected stoichiometry can be achieved by adjusting laser pulse power, pulse repetition rate, and specimen preparation parameters such that heat flow away from the evaporating surface is maximized. Applying these improved analysis conditions to III-V based PV gives an atomic scale understanding of compositional and dopant profiles across interfaces and tunnel junctions and the initial stages of alloy clustering and dopant accumulation. Details on APT experimental methods and future in-situ instrumentation developments are illustrated.

  11. International Atomic Energy Agency General Conference | Department...

    Broader source: Energy.gov (indexed) [DOE]

    ... efficiency, conservation, innovation and greater use of renewable and alternative clean sources of energy. ... Location: Vienna, Austria Media contact(s): Megan Barnett, (202) ...

  12. International Group Gathers in Knoxville to Discuss Sharing Science...

    Office of Scientific and Technical Information (OSTI)

    Denmark, Finland, Germany, the Netherlands, Norway, Portugal, Sweden, Switzerland, the U.K. and the International Atomic Energy Agency's International Nuclear Information System. ...

  13. International Nuclear Safeguards | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    | (NNSA) International Nuclear Safeguards Challenge: Detect/deter undeclared nuclear materials and activities. Solution: Build capacity of the International Atomic Energy Agency and Member States to implement and meet safeguards obligations. The Office of International Nuclear Safeguards develops and supports the policies, concepts, technologies, expertise, and international safeguards infrastructure necessary to strengthen and sustain the international safeguards system as it evolves to

  14. International Society for Optical Engineering (SPIE) Fellows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | (NNSA) International Nuclear Safeguards Challenge: Detect/deter undeclared nuclear materials and activities. Solution: Build capacity of the International Atomic Energy Agency and Member States to implement and meet safeguards obligations. The Office of International Nuclear Safeguards develops and supports the policies, concepts, technologies, expertise, and international safeguards infrastructure necessary to strengthen and sustain the international safeguards system as it evolves to

  15. Atomic magnetometer

    DOE Patents [OSTI]

    Schwindt, Peter; Johnson, Cort N.

    2012-07-03

    An atomic magnetometer is disclosed which uses a pump light beam at a D1 or D2 transition of an alkali metal vapor to magnetically polarize the vapor in a heated cell, and a probe light beam at a different D2 or D1 transition to sense the magnetic field via a polarization rotation of the probe light beam. The pump and probe light beams are both directed along substantially the same optical path through an optical waveplate and through the heated cell to an optical filter which blocks the pump light beam while transmitting the probe light beam to one or more photodetectors which generate electrical signals to sense the magnetic field. The optical waveplate functions as a quarter waveplate to circularly polarize the pump light beam, and as a half waveplate to maintain the probe light beam linearly polarized.

  16. International Programs | National Nuclear Security Administration...

    National Nuclear Security Administration (NNSA)

    It is providing direct emergency management assistance to the International Atomic Energy Agency (IAEA), Nuclear Energy Agency (NEA), Argentina, Armenia, Brazil, China, Georgia, ...

  17. International Engagement | National Nuclear Security Administration...

    National Nuclear Security Administration (NNSA)

    It is providing direct emergency management assistance to the International Atomic Energy Agency (IAEA), Nuclear Energy Agency (NEA), Argentina, Armenia, Brazil, China, Georgia, ...

  18. Atomic Chemistry in Turbulent Media I: Effect of Atomic Cooling...

    Office of Scientific and Technical Information (OSTI)

    Atomic Chemistry in Turbulent Media I: Effect of Atomic Cooling Citation Details In-Document Search Title: Atomic Chemistry in Turbulent Media I: Effect of Atomic Cooling Authors: ...

  19. Atom Trajectory Viewer

    Energy Science and Technology Software Center (OSTI)

    2015-12-28

    Atom Trajectory Viewer is a visualization tool developed to enable interactive exploration of atomic trajectories and corresponding statistics in molecular dynamics.

  20. International Cooperation Holiday Cheer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Administration International Atomic Energy Agency Secretary Moniz awards Hutcheon memorial nonproliferation fellowship to Thomas Gray Energy Secretary Ernest Moniz (second from bottom left, clockwise) and Anne Harrington, NNSA deputy administrator for Defense Nuclear Nonproliferation (sitting next to Moniz), discuss Ian Hutcheon's legacy with his wife Nancy (across from Harrington) and daughter Dana Hutcheon Gordon. Energy... DOE/NNSA's Nonproliferation Experts Lead First Workshop on the

  1. international security policy | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    security policy Nuclear Verification Challenge: Maintain the U.S. ability to monitor and verify nuclear reduction agreements and detect violations of treaties and other nuclear nonproliferation commitments. Solution: Develop and deploy measures to ensure verifiable compliance with treaties and other international agreements,... International Nuclear Safeguards Challenge: Detect/deter undeclared nuclear materials and activities. Solution: Build capacity of the International Atomic Energy Agency

  2. international security | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    security Nuclear Verification Challenge: Maintain the U.S. ability to monitor and verify nuclear reduction agreements and detect violations of treaties and other nuclear nonproliferation commitments. Solution: Develop and deploy measures to ensure verifiable compliance with treaties and other international agreements,... International Nuclear Safeguards Challenge: Detect/deter undeclared nuclear materials and activities. Solution: Build capacity of the International Atomic Energy Agency and

  3. Atomic vapor laser isotope separation

    SciTech Connect (OSTI)

    Stern, R.C.; Paisner, J.A.

    1985-11-08

    Atomic vapor laser isotope separation (AVLIS) is a general and powerful technique. A major present application to the enrichment of uranium for light-water power reactor fuel has been under development for over 10 years. In June 1985 the Department of Energy announced the selection of AVLIS as the technology to meet the nation's future need for the internationally competitive production of uranium separative work. The economic basis for this decision is considered, with an indicated of the constraints placed on the process figures of merit and the process laser system. We then trace an atom through a generic AVLIS separator and give examples of the physical steps encountered, the models used to describe the process physics, the fundamental parameters involved, and the role of diagnostic laser measurements.

  4. Atomizing nozzle and process

    DOE Patents [OSTI]

    Anderson, Iver E.; Figliola, Richard S.; Molnar, Holly M.

    1993-07-20

    High pressure atomizing nozzle includes a high pressure gas manifold having a divergent expansion chamber between a gas inlet and arcuate manifold segment to minimize standing shock wave patterns in the manifold and thereby improve filling of the manifold with high pressure gas for improved melt atomization. The atomizing nozzle is especially useful in atomizing rare earth-transition metal alloys to form fine powder particles wherein a majority of the powder particles exhibit particle sizes having near-optimum magnetic properties.

  5. Atomizing nozzle and process

    DOE Patents [OSTI]

    Anderson, Iver E.; Figliola, Richard S.; Molnar, Holly M.

    1992-06-30

    High pressure atomizing nozzle includes a high pressure gas manifold having a divergent expansion chamber between a gas inlet and arcuate manifold segment to minimize standing shock wave patterns in the manifold and thereby improve filling of the manifold with high pressure gas for improved melt atomization. The atomizing nozzle is especially useful in atomizing rare earth-transition metal alloys to form fine powder particles wherein a majority of the powder particles exhibit particle sizes having near-optimum magnetic properties.

  6. The Future of Atomic Energy

    DOE R&D Accomplishments [OSTI]

    Fermi, E.

    1946-05-27

    There is definitely a technical possibility that atomic power may gradually develop into one of the principal sources of useful power. If this expectation will prove correct, great advantages can be expected to come from the fact that the weight of the fuel is almost negligible. This feature may be particularly valuable for making power available to regions of difficult access and far from deposits of coal. It also may prove a great asset in mobile power units for example in a power plant for ship propulsion. On the negative side there are some technical limitations to be applicability of atomic power of which perhaps the most serious is the impossibility of constructing light power units; also there will be some peculiar difficulties in operating atomic plants, as for example the necessity of handling highly radioactive substances which will necessitate, at least for some considerable period, the use of specially skilled personnel for the operation. But the chief obstacle in the way of developing atomic power will be the difficulty of organizing a large scale industrial development in an internationally safe way. This presents actually problems much more difficult to solve than any of the technical developments that are necessary, It will require an unusual amount of statesmanship to balance properly the necessity of allaying the international suspicion that arises from withholding technical secrets against the obvious danger of dumping the details of the procedures for an extremely dangerous new method of warfare on a world that may not yet be prepared to renounce war. Furthermore, the proper balance should be found in the relatively short time that will elapse before the 'secrets' will naturally become open knowledge by rediscovery on part of the scientists and engineers of other countries.

  7. Atomic Energy Commission Takes Over Responsibility for all Atomic...

    National Nuclear Security Administration (NNSA)

    Takes Over Responsibility for all Atomic Energy Programs Atomic Energy Commission Takes Over Responsibility for all Atomic Energy Program Washington, DC In accordance with the ...

  8. Atomic Energy Commission : Atomic Power at Shippingport - 1958 Educational Film

    SciTech Connect (OSTI)

    2013-02-02

    The United States Atomic Energy Commission & Westinghouse Electric Company take us on a tour of an atomic power station.

  9. PARTICLE ACCELERATORS; 74 ATOMIC AND MOLECULAR PHYSICS; ATOMS...

    Office of Scientific and Technical Information (OSTI)

    74 ATOMIC AND MOLECULAR PHYSICS; ATOMS; ELECTRONS; HELIUM; LIGHT SOURCES; RADIATIONS; STORAGE RINGS; SYNCHROTRONS SYNCHROTRON RADIATION SYNCHROTRONLIGHT SOURCES QUANTUM CHAOS...

  10. Atomic Energy Commission : Atomic Power at Shippingport - 1958 Educational Film

    ScienceCinema (OSTI)

    None

    2014-07-31

    The United States Atomic Energy Commission & Westinghouse Electric Company take us on a tour of an atomic power station.

  11. Nonlinear spectroscopic effects in quantum gases induced by atom-atom interactions

    SciTech Connect (OSTI)

    Safonov, A. I. Safonova, I. I.; Yasnikov, I. S.

    2013-05-15

    We consider nonlinear spectroscopic effects-interaction-enhanced double resonance and spectrum instability-that appear in ultracold quantum gases owing to collisional frequency shift of atomic transitions and, consequently, due to the dependence of the frequencies on the population of various internal states of the particles. Special emphasis is put to two simplest cases, (a) the gas of two-level atoms and (b) double resonance in a gas of three-level bosons, in which the probe transition frequency remains constant.

  12. Atomic Energy Commission Takes Over Responsibility for all Atomic Energy

    National Nuclear Security Administration (NNSA)

    Programs | National Nuclear Security Administration | (NNSA) Takes Over Responsibility for all Atomic Energy Programs Atomic Energy Commission Takes Over Responsibility for all Atomic Energy Program Washington, DC In accordance with the Atomic Energy Act of 1946, all atomic energy activities are transferred to the newly created Atomic Energy Commission

  13. International Training Course | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Training Course NNSA and IAEA Hold the 20th International Training Course on Nuclear Material Accounting and Control Washington, D.C. - The National Nuclear Security Administration (NNSA) and the International Atomic Energy Agency (IAEA) are hosting 35 representatives from 30 countries at Oak Ridge National Laboratory in Oak Ridge, Tennessee, from April 26 to May 8, 2015 for the 20th International Training Course... NNSA and IAEA Celebrate the 25th International Training Course Washington, D.C.

  14. International Engagement | National Nuclear Security Administration |

    National Nuclear Security Administration (NNSA)

    (NNSA) International Engagement NNSA engages the international community by working with more than 60 foreign governments and 10 international organizations, plus several regional organizations, to improve nuclear emergency management systems worldwide. It is providing direct emergency management assistance to the International Atomic Energy Agency (IAEA), Nuclear Energy Agency (NEA), Argentina, Armenia, Brazil, China, Georgia, Iraq, Japan, Mexico, Russia, South Korea, and Taiwan. New

  15. Highly tunable magnetism in silicene doped with Cr and Fe atoms...

    Office of Scientific and Technical Information (OSTI)

    of Nanomechanics, School of Engineering, Tohoku ... LLC; Country of input: International Atomic Energy Agency ... Email address: Content: Close Send Cite: MLA Format Close ...

  16. Metal atom oxidation laser

    DOE Patents [OSTI]

    Jensen, R.J.; Rice, W.W.; Beattie, W.H.

    1975-10-28

    A chemical laser which operates by formation of metal or carbon atoms and reaction of such atoms with a gaseous oxidizer in an optical resonant cavity is described. The lasing species are diatomic or polyatomic in nature and are readily produced by exchange or other abstraction reactions between the metal or carbon atoms and the oxidizer. The lasing molecules may be metal or carbon monohalides or monoxides. (auth)

  17. Metal atom oxidation laser

    DOE Patents [OSTI]

    Jensen, R.J.; Rice, W.W.; Beattie, W.H.

    1975-10-28

    A chemical laser which operates by formation of metal or carbon atoms and reaction of such atoms with a gaseous oxidizer in an optical resonant cavity is described. The lasing species are diatomic or polyatomic in nature and are readily produced by exchange or other abstraction reactions between the metal or carbon atoms and the oxidizer. The lasing molecules may be metal or carbon monohalides or monoxides.

  18. Improved graphite furnace atomizer

    DOE Patents [OSTI]

    Siemer, D.D.

    1983-05-18

    A graphite furnace atomizer for use in graphite furnace atomic absorption spectroscopy is described wherein the heating elements are affixed near the optical path and away from the point of sample deposition, so that when the sample is volatilized the spectroscopic temperature at the optical path is at least that of the volatilization temperature, whereby analyteconcomitant complex formation is advantageously reduced. The atomizer may be elongated along its axis to increase the distance between the optical path and the sample deposition point. Also, the atomizer may be elongated along the axis of the optical path, whereby its analytical sensitivity is greatly increased.

  19. The Harnessed Atom

    Broader source: Energy.gov [DOE]

    The Harnessed Atom is a new middle school science, technology, engineering, and math (STEM) curriculum extension that focuses on nuclear science and energy. It offers teachers accurate, unbiased,...

  20. International Conference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Internal Combustion Engine Basics Internal Combustion Engine Basics November 22, 2013 - 2:02pm Addthis Pictured here is an animation showing the basic mechanics of how an internal combustion engine works. With support from the Energy Department, General Motors researchers developed a new technology -- the Intake Valve Lift Control -- that is helping save fuel and lower emissions in the 2014 Chevy Impala. As visualized in the closeup of the graphic, the Intake Valve Lift Control can operate at

  1. Amnesty International

    ScienceCinema (OSTI)

    None

    2011-04-25

    Martin Ennals est secrétaire général d'Amnesty International et fait un discours sur les droits de l'homme

  2. Modified Embedded Atom Method

    Energy Science and Technology Software Center (OSTI)

    2012-08-01

    Interatomic force and energy calculation subroutine to be used with the molecular dynamics simulation code LAMMPS (Ref a.). The code evaluated the total energy and atomic forces (energy gradient) according to a cubic spline-based variant (Ref b.) of the Modified Embedded Atom Method (MEAM) with a additional Stillinger-Weber (SW) contribution.

  3. Light-pulse atom interferometric device

    DOE Patents [OSTI]

    Biedermann, Grant; McGuinness, Hayden James Evans; Rakholia, Akash; Jau, Yuan-Yu; Schwindt, Peter; Wheeler, David R.

    2016-03-22

    An atomic interferometric device useful, e.g., for measuring acceleration or rotation is provided. The device comprises at least one vapor cell containing a Raman-active chemical species, an optical system, and at least one detector. The optical system is conformed to implement a Raman pulse interferometer in which Raman transitions are stimulated in a warm vapor of the Raman-active chemical species. The detector is conformed to detect changes in the populations of different internal states of atoms that have been irradiated by the optical system.

  4. International | National Nuclear Security Administration | (NNSA)

    National Nuclear Security Administration (NNSA)

    International U.S. Department of Energy / U.S. Nuclear Regulatory Commission Nuclear Materials Management & Safeguards System Foreign Obligations Foreign Obligations Implementation Status Obligations Notification Cycle and New Obligations Implementation of Equipment-Based Obligations Beginning Foreign Obligation Balances for the Power Reactors Beyond Beginning Balances International Atomic Energy Agency IAEA Homepage Safeguards Agreement between the United States and the IAEA with

  5. CNEEC - Atomic Layer Deposition Tutorial by Stacey Bent

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Atomic Layer Deposition

  6. Atomizing nozzle and method

    DOE Patents [OSTI]

    Ting, Jason (Ames, IA); Anderson, Iver E. (Ames, IA); Terpstra, Robert L. (Ames, IA)

    2000-03-16

    A high pressure close-coupled gas atomizing nozzle includes multiple discrete gas jet discharge orifices having aerodynamically designed convergent-divergent geometry with an first converging section communicated to a gas supply manifold and to a diverging section by a constricted throat section to increase atomizing gas velocity. The gas jet orifices are oriented at gas jet apex angle selected relative to the melt supply tip apex angle to establish a melt aspiration condition at the melt supply tip.

  7. Optical atomic magnetometer

    DOE Patents [OSTI]

    Budker, Dmitry; Higbie, James; Corsini, Eric P

    2013-11-19

    An optical atomic magnetometers is provided operating on the principles of nonlinear magneto-optical rotation. An atomic vapor is optically pumped using linearly polarized modulated light. The vapor is then probed using a non-modulated linearly polarized light beam. The resulting modulation in polarization angle of the probe light is detected and used in a feedback loop to induce self-oscillation at the resonant frequency.

  8. Metal atomization spray nozzle

    DOE Patents [OSTI]

    Huxford, T.J.

    1993-11-16

    A spray nozzle for a magnetohydrodynamic atomization apparatus has a feed passage for molten metal and a pair of spray electrodes mounted in the feed passage. The electrodes, diverging surfaces which define a nozzle throat and diverge at an acute angle from the throat. Current passes through molten metal when fed through the throat which creates the Lorentz force necessary to provide atomization of the molten metal. 6 figures.

  9. Metal atomization spray nozzle

    DOE Patents [OSTI]

    Huxford, Theodore J.

    1993-01-01

    A spray nozzle for a magnetohydrodynamic atomization apparatus has a feed passage for molten metal and a pair of spray electrodes mounted in the feed passage. The electrodes, diverging surfaces which define a nozzle throat and diverge at an acute angle from the throat. Current passes through molten metal when fed through the throat which creates the Lorentz force necessary to provide atomization of the molten metal.

  10. Mexico: swapping crude for atoms

    SciTech Connect (OSTI)

    Navarro, B.

    1982-06-24

    Mexico, considered the Saudi Arabia of the Western Hemisphere because of its proven and potential petroleum reserves, has surprised the world: it has embarked on the biggest nuclear-electric program in the Third World, only to postpone it days before scheduled approval of an international bidding (on which the atomic energy industry had pinned its hopes). A graph shows Mexican supplies of electricity by source with official projections to 1990. The point of entrance of the first nuclear reactor, originally scheduled for 1982, won't come onstream until 1983; and how nuclear-generated electricity grows close to 5% of the total in 1990. The big question is, will the future President of Mexico give the green light to the atomic megaproject. And if he does, how will Mexico deal with the serious logistics problems and grave ecological implications confronting the industry worldwide. In this issue, the author and Energy Detente touch on these questions and review the nuclear power status of Mexico, as well as addressing some of its global problems. Also presented in this issue is an update of the fuel price/tax series for the Western Hemisphere countries.

  11. International Fellows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Alexander and Lienert selected as ASM International Fellows November 6, 2013 David Alexander and Thomas Lienert of Metallurgy (MST-6) are among ASM International's 2013 Class of Fellows, who are honored for their distinguished contributions to materials science and engineering. A total of nine ASM fellows have come from Los Alamos over the years, according to the society, which is commemorating its 100th anniversary. Alexander achievements The citation for Alexander reads: "For excellence

  12. International Sunport

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    International Programs International Programs The U.S. Department of Energy (DOE) Office of Environmental Management (EM) has a mission to complete the safe clean-up of the environmental legacy resulting from six decades of weapons production and energy research. This effort is recognized as one of the largest and most diverse and technically complex environmental clean-up operations in the world. As described in the DOE Strategic Plan, to accomplish this mission, the Department will leverage

  13. International Feedstock

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1.2.1.5 International Feedstock March 24, 2015 Feedstocks Patrick Lamers, PhD Idaho National Laboratory This presentation does not contain any proprietary, confidential, or otherwise restricted information 2 | Bioenergy Technologies Office Goal Statement Put the U.S. bioeconomy strategy in the context of global, competitive feedstock markets. * Evaluate international impacts on U.S. feedstock supply costs * Improve U.S. feedstock cost and volume projections * Leverage existing expertise and

  14. General Atomics (GA) | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    General Atomics (GA) Subscribe to RSS - General Atomics (GA) General Atomics Image: General Atomics (GA) The Scorpion's Strategy: "Catch and Subdue" Read more about The Scorpion's...

  15. The Harnessed Atom | Department of Energy

    Office of Environmental Management (EM)

    The Harnessed Atom The Harnessed Atom The Harnessed Atom The Harnessed Atom is a new middle school science, technology, engineering, and math (STEM) curriculum extension...

  16. Internal shim

    DOE Patents [OSTI]

    Barth, Clyde H.; Blizinski, Theodore W.

    2003-05-13

    An internal shim used to accurately measure spaces in conjunction with a standard small probe has a shim top and a chassis. The internal shim is adjustably fixed within the space to be measured using grippers that emerge from the chassis and which are controlled by an arm pivotably attached to the shim top. A standard small probe passes through the shim along guides on the chassis and measures the distance between the exterior of the chassis and the boundary. By summing the measurements on each side of the chassis and the width of the chassis, the dimension of the space can be determined to within 0.001 inches.

  17. Internal Dosimetry

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    MEASUREMENT SENSITIVE DOE-STD-1121-2008 Change Notice No.1 October 2013 DOE STANDARD INTERNAL DOSIMETRY U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document is available on the Department of Energy Technical Standards Program Web Site at http://energy.gov/hss/information-center/department-energy- technical-standards-program ii Change Notice 1. Internal Dosimetry DOE-STD-1121-2008 Page/Section

  18. Atomic vapor laser isotope separation

    SciTech Connect (OSTI)

    Stern, R.C.; Paisner, J.A.

    1986-08-15

    The atomic vapor laser isotope separation (AVLIS) process for the enrichment of uranium is evaluated. (AIP)

  19. International Atomic Energy Agency 49th Session of the General...

    Office of Environmental Management (EM)

    Energy is a necessary engine of economic growth, a key to raising living standards . indeed, a key to raising nations and regions out of poverty. Our Administration firmly believes ...

  20. U.S. Energy Secretary Addresses International Atomic Energy Agency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Agency's General Conference today in Vienna. Opening with a message from President Barack Obama, Secretary Chu highlighted the importance of safety and security in the nuclear ...

  1. International Atomic Energy Agency safeguards after Iraq - some Austrailian perceptions

    SciTech Connect (OSTI)

    Bardsley, J.; Carlson, J.; Hill, J.

    1994-12-31

    Iraq`s nuclear weapons development program used facilities and nuclear material separate from its safeguarded activities. To detect such a strategy the IAEA`s safeguards inspectors need access to locations and information beyond that foreseen in NPT safeguards agreements. But the IAEA is short of money. And detecting undeclared activities could be expensive. If the IAEA can establish a capability to detect undeclared activities, then it might be able to save on regular safeguards. But it`s important not to put the cart before the horse - effective safeguards must come first, savings second.

  2. Secretary Moniz's Remarks at the 2015 International Atomic Energy...

    Broader source: Energy.gov (indexed) [DOE]

    ... We urge all Member States to contribute toward that end. Thank you. Addthis Related Articles Statement from Secretary Moniz on Implementation Day for the Joint Comprehensive Plan ...

  3. Secretary Chu Addresses the International Atomic Energy Agency...

    Broader source: Energy.gov (indexed) [DOE]

    ... Mo-99 production be undertaken without HEU. The United States is developing medical isotope production processes that do not require the use of HEU. In April, 47 world ...

  4. International Atomic Energy Agency 49th Session of the General...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    proliferation while expanding the use of nuclear power around the globe. The wide expansion of nuclear energy can only come if the world fully embraces this vision. This is...

  5. Iowa Powder Atomization Technologies

    SciTech Connect (OSTI)

    2012-01-01

    The same atomization effect seen in a fuel injector is being applied to titanium metal resulting in fine titanium powders that are less than half the width of a human hair. Titanium melts above 3,000°F and is highly corrosive therefore requiring specialized containers. The liquid titanium is poured through an Ames Laboratory - USDOE patented tube which is intended to increase the energy efficiency of the atomization process, which has the ability to dramatically decrease the cost of fine titanium powders. This novel process could open markets for green manufacturing of titanium components from jet engines to biomedical implants.

  6. Atomic Force Microscope

    SciTech Connect (OSTI)

    Day, R.D.; Russell, P.E.

    1988-12-01

    The Atomic Force Microscope (AFM) is a recently developed instrument that has achieved atomic resolution imaging of both conducting and non- conducting surfaces. Because the AFM is in the early stages of development, and because of the difficulty of building the instrument, it is currently in use in fewer than ten laboratories worldwide. It promises to be a valuable tool for obtaining information about engineering surfaces and aiding the .study of precision fabrication processes. This paper gives an overview of AFM technology and presents plans to build an instrument designed to look at engineering surfaces.

  7. Iowa Powder Atomization Technologies

    ScienceCinema (OSTI)

    None

    2013-03-01

    The same atomization effect seen in a fuel injector is being applied to titanium metal resulting in fine titanium powders that are less than half the width of a human hair. Titanium melts above 3,000°F and is highly corrosive therefore requiring specialized containers. The liquid titanium is poured through an Ames Laboratory - USDOE patented tube which is intended to increase the energy efficiency of the atomization process, which has the ability to dramatically decrease the cost of fine titanium powders. This novel process could open markets for green manufacturing of titanium components from jet engines to biomedical implants.

  8. Second United Nations International Conference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    United Nations International Conference on the Peaceful Uses of Atomic Energy Confidential until official release during Conference A/CONF 15/P/729 Abstract (USA) 7 March 1958 ORIGINAL: ENGLISH HIGH-ENERGY PHYSICS WITH HYDROGEN BUBBLE CHAMBERS~ Prepared by Abstract , _ - - ' ~ u i s W. Akvarez . I e - 4 - - a c bubble chambers in high-energy physics experiments. This paper @.scusses recent experience with liquid hydrogen # - . . . 1 sify of California, Berkeley, California / This document is

  9. INL Laboratory Scale Atomizer

    SciTech Connect (OSTI)

    C.R. Clark; G.C. Knighton; R.S. Fielding; N.P. Hallinan

    2010-01-01

    A laboratory scale atomizer has been built at the Idaho National Laboratory. This has proven useful for laboratory scale tests and has been used to fabricate fuel used in the RERTR miniplate experiments. This instrument evolved over time with various improvements being made ‘on the fly’ in a trial and error process.

  10. Ultracold Atoms: How Quantum Field Theory Invaded Atomic Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ultracold Atoms: How Quantum Field Theory Invaded Atomic Physics Eric Braaten Ohio State University May 6, 2015 4:00 p.m. (coffee @ 3:30) The development of the technology for trapping atoms and cooling them to ultralow temperatures gave birth to a new subfield of atomic physics. It also led to the introduction of new theoretical methods into atomic physics, I n particular quantum field theory (QFT). Methods of QFT developed in high energy physics have proved to be very useful in ultracold atom

  11. Internationally monitored retrievable storage system

    SciTech Connect (OSTI)

    Hafele, W.

    1996-12-31

    The proposed internationally monitored retrievable storage system (IMRSS) is intended to provide an orderly and secure alternative to continuation of the current individualistic spent-fuel management trends in nuclear-power countries. The IMRSS concept, in its broadest terms, proposes that an international entity undertake the management responsibility for spent fuel after its discharge from power plant cooling ponds. The IMRSS envisages international management of a small number of surface (or near-surface) storage facilities distributed globally (in major nuclear countries and elsewhere) and a transportation system between nuclear plants and the storage facilities. The International Atomic Energy Agency (IAEA) would maintain responsibility for adherence to safeguards criteria. The IMRSS operation would be similar to that of an international bank, with each nation maintaining title to its spent fuel and able to withdraw it for peaceful purposes. The system would provide transparency, accountability, and security. The IMRSS would be a step to establishing an inter- national regime for the prudent management of spent fuel and excess civilian plutonium. The IMRSS concept has been studied in three international workshops. Among the major issues that have been addressed are the global distribution of spent fuel if current trends continue, the need for international criteria and management to ensure public health and nonproliferation, the value of spent-fuel retrievability, the future role of a plutonium resource in the fuel cycle, the operating format of a practical IMRSS, and the integration of an IMRSS with existing geopolitical agreements and arrangements.

  12. INTERNATIONAL AGREEMENTS

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    INTERNATIONAL AGREEMENTS Signed by Secretary Spencer Abraham January 2001-December 2004 TABLE OF CONTENTS Joint Statement of ntent between the Department of Energy of the United States ofAmerica and The Ministry of Energy and Mines of the Republic ofPeru on Cooperation in the Field of Energy -Tab 1 Fifth Hemispheric Energy Ministers Meeting Mexico City, Mexico - March 9, 2001. Mexico Declaration - Energy: A Crucial Factor for Integration and Sustainable Development in the Hemisphere - Tab 2

  13. International Collaboration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chapter 6 Buildings sector energy consumption Overview Energy consumed in the buildings sector consists of residential and commercial end users and accounts for 20.1% of the total delivered energy consumed worldwide. Consumption of delivered, or site, energy contrasts with the use of the primary energy that also includes the energy used to generate and deliver electricity to individual sites such as homes, offices, or industrial plants. In the International Energy Outlook 2016 (IEO2016)

  14. International Affairs - DOE Directives, Delegations, and Requirements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    International Affairs

  15. REVIEW OF THE NEGOTIATION OF THE MODEL PROTOCOL ADDITIONAL TO THE AGREEMENT(S) BETWEEN STATE(S) AND THE INTERNATIONAL ATOMIC ENERGY AGENCY FOR THE APPLICATION OF SAFEGUARDS,INFCIRC/540 (Corrected) VOLUME I/III SETTING THE STAGE: 1991-1996.

    SciTech Connect (OSTI)

    Rosenthal, M.D.; Saum-Manning, L.; Houck, F.; Anzelon, G.

    2010-01-01

    Events in Iraq at the beginning of the 1990s demonstrated that the safeguards system of the International Atomic Energy Agency (IAEA) needed to be improved. It had failed, after all, to detect Iraq's clandestine nuclear weapon program even though some of Iraq's's activities had been pursued at inspected facilities in buildings adjacent to ones being inspected by the IAEA. Although there were aspects of the implementation of safeguards where the IAEA needed to improve, the primary limitations were considered to be part of the safeguards system itself. That system was based on the Nuclear Nonproliferation Treaty of 1970, to which Iraq was a party, and implemented on the basis of a model NPT safeguards agreement, published by the IAEA 1972 as INFCIRC/153 (corrected). The agreement calls for states to accept and for the IAEA to apply safeguards to all nuclear material in the state. Iraq was a party to such an agreement, but it violated the agreement by concealing nuclear material and other nuclear activities from the IAEA. Although the IAEA was inspecting in Iraq, it was hindered by aspects of the agreement that essentially limited its access to points in declared facilities and provided the IAEA with little information about nuclear activities anywhere else in Iraq. As a result, a major review of the NPT safeguards system was initiated by its Director General and Member States with the objective of finding the best means to enable the IAEA to detect both diversions from declared stocks and any undeclared nuclear material or activities in the state. Significant improvements that could be made within existing legal authority were taken quickly, most importantly a change in 1992 in how and when and what design information would be reported to the IAEA. During 1991-1996, the IAEA pursued intensive study, legal and technical analysis, and field trials and held numerous consultations with Member States. The Board of Governors discussed the issue of strengthening safeguards

  16. Lawrenciums ionization potential, atom by atom

    SciTech Connect (OSTI)

    Miller, Johanna L.

    2015-06-15

    Researchers in Japan have begun probing the atomic physics of elements that can be produced only in minute quantities.

  17. A microfabricated atomic clock

    SciTech Connect (OSTI)

    Knappe, Svenja; Shah, Vishal; Schwindt, Peter D.D.; Hollberg, Leo; Kitching, John; Liew, Li-Anne; Moreland, John

    2004-08-30

    Fabrication techniques usually applied to microelectromechanical systems (MEMS) are used to reduce the size and operating power of the core physics assembly of an atomic clock. With a volume of 9.5 mm{sup 3}, a fractional frequency instability of 2.5x10{sup -10} at 1 s of integration, and dissipating less than 75 mW of power, the device has the potential to bring atomically precise timing to hand-held, battery-operated devices. In addition, the design and fabrication process allows for wafer-level assembly of the structures, enabling low-cost mass-production of thousands of identical units with the same process sequence, and easy integration with other electronics.

  18. ATOMIC ENERGY COMMISSION

    Office of Legacy Management (LM)

    ' ATOMIC ENERGY COMMISSION Frank K. Pittman, Director, bivisioa of Waste &&gement and s- portation, Headquarters j CONTAMItUTED RX-AEC-OWNED OR LEASED FACILITIES' This memorandum responds to your TWX certain information on the above subject. the documentation necessary to answer your available due to the records disposal vailing at the time of release or From records that are available and from disc&ions with most familiar with the transfer operations, &have the current

  19. Internal Dosimetry

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    21-2008 October 2008 DOE STANDARD INTERNAL DOSIMETRY U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE ii This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ DOE-STD-1121-2008 iii FOREWORD 1. This Department of Energy (DOE) standard is approved for use by all DOE Components and their

  20. Budget Atomization | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Budget Atomization Budget Atomization Howard Dickenson, Deputy Associate Administrator for Acquisition and Project Management presented on Budget Atomization from the NNSA perspective. Howard presented an overview of the NNSA budget structure and an example of LANL controls. Chris Johns, Director of the Budget Office, DOE Office of the CFO presented on Budget Atomization from the DOE perspective. Chris provided an overview of funding, provided examples, and demonstrated the effect on labs/sites.

  1. Atomization methods for forming magnet powders

    DOE Patents [OSTI]

    Sellers, Charles H.; Branagan, Daniel J.; Hyde, Timothy A.

    2000-01-01

    The invention encompasses methods of utilizing atomization, methods for forming magnet powders, methods for forming magnets, and methods for forming bonded magnets. The invention further encompasses methods for simulating atomization conditions. In one aspect, the invention includes an atomization method for forming a magnet powder comprising: a) forming a melt comprising R.sub.2.1 Q.sub.13.9 B.sub.1, Z and X, wherein R is a rare earth element; X is an element selected from the group consisting of carbon, nitrogen, oxygen and mixtures thereof; Q is an element selected from the group consisting of Fe, Co and mixtures thereof; and Z is an element selected from the group consisting of Ti, Zr, Hf and mixtures thereof; b) atomizing the melt to form generally spherical alloy powder granules having an internal structure comprising at least one of a substantially amorphous phase or a substantially nanocrystalline phase; and c) heat treating the alloy powder to increase an energy product of the alloy powder; after the heat treatment, the alloy powder comprising an energy product of at least 10 MGOe. In another aspect, the invention includes a magnet comprising R, Q, B, Z and X, wherein R is a rare earth element; X is an element selected from the group consisting of carbon, nitrogen, oxygen and mixtures thereof; Q is an element selected from the group consisting of Fe, Co and mixtures thereof; and Z is an element selected from the group consisting of Ti, Zr, Hf and mixtures thereof; the magnet comprising an internal structure comprising R.sub.2.1 Q.sub.13.9 B.sub.1.

  2. Atomizer with liquid spray quenching

    DOE Patents [OSTI]

    Anderson, I.E.; Osborne, M.G.; Terpstra, R.L.

    1998-04-14

    Method and apparatus are disclosed for making metallic powder particles wherein a metallic melt is atomized by a rotating disk or other atomizer at an atomizing location in a manner to form molten droplets moving in a direction away from said atomizing location. The atomized droplets pass through a series of thin liquid quenching sheets disposed in succession about the atomizing location with each successive quenching sheet being at an increasing distance from the atomizing location. The atomized droplets are incrementally cooled and optionally passivated as they pass through the series of liquid quenching sheets without distorting the atomized droplets from their generally spherical shape. The atomized, cooled droplets can be received in a chamber having a collection wall disposed outwardly of the series of liquid quenching sheets. A liquid quenchant can be flowed proximate the chamber wall to carry the cooled atomized droplets to a collection chamber where atomized powder particles and the liquid quenchant are separated such that the liquid quenchant can be recycled. 6 figs.

  3. Atomizer with liquid spray quenching

    DOE Patents [OSTI]

    Anderson, Iver E.; Osborne, Matthew G.; Terpstra, Robert L.

    1998-04-14

    Method and apparatus for making metallic powder particles wherein a metallic melt is atomized by a rotating disk or other atomizer at an atomizing location in a manner to form molten droplets moving in a direction away from said atomizing location. The atomized droplets pass through a series of thin liquid quenching sheets disposed in succession about the atomizing location with each successive quenching sheet being at an increasing distance from the atomizing location. The atomized droplets are incrementally cooled and optionally passivated as they pass through the series of liquid quenching sheets without distorting the atomized droplets from their generally spherical shape. The atomized, cooled droplets can be received in a chamber having a collection wall disposed outwardly of the series of liquid quenching sheets. A liquid quenchant can be flowed proximate the chamber wall to carry the cooled atomized droplets to a collection chamber where atomized powder particles and the liquid quenchant are separated such that the liquid quenchant can be recycled.

  4. Ruthenium / aerogel nanocomposits via Atomic Layer Deposition

    SciTech Connect (OSTI)

    Biener, J; Baumann, T F; Wang, Y; Nelson, E J; Kucheyev, S O; Hamza, A V; Kemell, M; Ritala, M; Leskela, M

    2006-08-28

    We present a general approach to prepare metal/aerogel nanocomposites via template directed atomic layer deposition (ALD). In particular, we used a Ru ALD process consisting of alternating exposures to bis(cyclopentadienyl)ruthenium (RuCp{sub 2}) and air at 350 C to deposit metallic Ru nanoparticles on the internal surfaces of carbon and silica aerogels. The process does not affect the morphology of the aerogel template and offers excellent control over metal loading by simply adjusting the number of ALD cycles. We also discuss the limitations of our ALD approach, and suggest ways to overcome these.

  5. DOE - NNSA/NFO -- Atomic Testing Museum

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Atomic Testing Museum NNSANFO Language Options U.S. DOENNSA - Nevada Field Office NATIONAL ATOMIC TESTING MUSEUM Photograph of Atomic Testing Museum The Nevada Test Site ...

  6. Atomic data for fusion

    SciTech Connect (OSTI)

    Hunter, H.T.; Kirkpatrick, M.I.; Alvarez, I.; Cisneros, C.; Phaneuf, R.A.; Barnett, C.F.

    1990-07-01

    This report provides a handbook of recommended cross-section and rate-coefficient data for inelastic collisions between hydrogen, helium and lithium atoms, molecules and ions, and encompasses more than 400 different reactions of primary interest in fusion research. Published experimental and theoretical data have been collected and evaluated, and the recommended data are presented in tabular, graphical and parametrized form. Processes include excitation and spectral line emission, charge exchange, ionization, stripping, dissociation and particle interchange reactions. The range of collision energies is appropriate to applications in fusion-energy research.

  7. Atomically resolved force microscopy at room temperature

    SciTech Connect (OSTI)

    Morita, Seizo

    2014-04-24

    Atomic force microscopy (AFM) can now not only image individual atoms but also construct atom letters using atom manipulation method even at room temperature (RT). Therefore, the AFM is the second generation atomic tool following the scanning tunneling microscopy (STM). However the AFM can image even insulating atoms, and also directly measure/map the atomic force and potential at the atomic scale. Noting these advantages, we have been developing a bottom-up nanostructuring system at RT based on the AFM. It can identify chemical species of individual atoms and then manipulate selected atom species to the predesigned site one-by-one to assemble complex nanostructures consisted of multi atom species at RT. Here we introduce our results toward atom-by-atom assembly of composite nanostructures based on the AFM at RT including the latest result on atom gating of nano-space for atom-by-atom creation of atom clusters at RT for semiconductor surfaces.

  8. Argonne Outloud promo: From Atoms to Advanced Energy Technologies | Argonne

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Laboratory promo: From Atoms to Advanced Energy Technologies Share Browse By - Any - General Argonne Information Energy -Energy efficiency --Vehicles ---Alternative fuels ---Automotive engineering ---Diesel ---Electric drive technology ---Hybrid & electric vehicles ---Hydrogen & fuel cells ---Internal combustion ---Powertrain research --Building design ---Construction --Manufacturing -Energy sources --Renewable energy ---Bioenergy ---Solar energy --Fossil fuels ---Natural

  9. Can binuclear atoms solve the cold fusion puzzle

    SciTech Connect (OSTI)

    Cerofolini, G.F. ); Para, A.F. )

    1993-01-01

    The internal and external inconsistencies of cold fusion phenomena are discussed. It is shown that most of these inconsistencies can be removed by assuming the formation of binuclear atoms that have the ability to trap thermal neutrons from the natural background in a localized state. 29 refs., 3 figs.

  10. U.S. Energy Secretary Moniz and Chinese Atomic Energy Authority...

    Office of Environmental Management (EM)

    News Media Contact 202-586-4940 DOENews@hq.doe.gov BEIJING, CHINA - Today, U.S. Secretary ... international VIPs, participated with the China Atomic Energy Authority (CAEA) to ...

  11. Atoms For Peace Video, Office of Scientific and Technical Information, U.S.

    Office of Scientific and Technical Information (OSTI)

    Department of Energy, www.osti.gov Atoms for Peace The Department of Energy (DOE) Office of Scientific and Technical Information (OSTI) has a proud legacy of supporting the nation's Atoms for Peace initiative. This video highlights historical information emanating from the Atoms for Peace initiative and showcases materials and papers authored by major pioneering figures of nuclear energy. The Department's scientific research from the 1940s to the present, and its national and international

  12. The Collective Atomic Recoil Laser

    SciTech Connect (OSTI)

    Courteille, Ph.W.; Cube, C. avon; Deh, B.; Kruse, D.; Ludewig, A.; Slama, S.; Zimmermann, C.

    2005-05-05

    An ensemble of periodically ordered atoms coherently scatters the light of an incident laser beam. The scattered and the incident light may interfere and give rise to a light intensity modulation and thus to optical dipole forces which, in turn, emphasize the atomic ordering. This positive feedback is at the origin of the collective atomic recoil laser (CARL). We demonstrate this dynamics using ultracold atoms confined by dipole forces in a unidirectionally pumped far red-detuned high-finesse optical ring cavity. Under the influence of an additional dissipative force exerted by an optical molasses the atoms, starting from an unordered distribution, spontaneously form a density grating moving at constant velocity. Additionally, steady state lasing is observed in the reverse direction if the pump laser power exceeds a certain threshold. We compare the dynamics of the atomic trajectories to the behavior of globally coupled oscillators, which exhibit phase transitions from incoherent to coherent states if the coupling strength exceeds a critical value.

  13. General Atomics | Open Energy Information

    Open Energy Info (EERE)

    Product: General Atomics offers research, development and consulting services to the nuclear industry, including nuclear energy production, manufacturing, defense and related...

  14. The Atomic City / The Magic of the Atom - 1950's Atomic Energy Commission Documentary

    ScienceCinema (OSTI)

    None

    2014-07-31

    The story of American cities located near atomic power plants, and steps taken monitoring radiation to ensure the safety of the public who live nearby. .

  15. The Atomic City / The Magic of the Atom - 1950's Atomic Energy Commission Documentary

    SciTech Connect (OSTI)

    2012-06-04

    The story of American cities located near atomic power plants, and steps taken monitoring radiation to ensure the safety of the public who live nearby. .

  16. Proton's party pals may alter its internal structure | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proton's party pals may alter its internal structure Proton's party pals may alter its internal structure NEWPORT NEWS, VA, November 18, 2009 - A recent experiment at the Department of Energy's Thomas Jefferson National Accelerator Facility has found that a proton's nearest neighbors in the nucleus of the atom may modify the proton's internal structure. The result was published in the November 13 issue of the journal Physical Review Letters. When comparing large nuclei to small nuclei, past

  17. In-situ control system for atomization

    DOE Patents [OSTI]

    Anderson, I.E.; Figliola, R.S.; Terpstra, R.L.

    1995-06-13

    Melt atomizing apparatus comprising a melt supply orifice for supplying the melt for atomization and gas supply orifices proximate the melt supply orifice for supplying atomizing gas to atomize the melt as an atomization spray is disclosed. The apparatus includes a sensor, such as an optical and/or audio sensor, for providing atomization spray data, and a control unit responsive to the sensed atomization spray data for controlling at least one of the atomizing gas pressure and an actuator to adjust the relative position of the gas supply orifice and melt supply in a manner to achieve a desired atomization spray. 3 figs.

  18. In-situ control system for atomization

    DOE Patents [OSTI]

    Anderson, Iver E.; Figliola, Richard S.; Terpstra, Robert L.

    1995-06-13

    Melt atomizing apparatus comprising a melt supply orifice for supplying the melt for atomization and gas supply orifices proximate the melt supply orifice for supplying atomizing gas to atomize the melt as an atomization spray. The apparatus includes a sensor, such as an optical and/or audio sensor, for providing atomization spray data, and a control unit responsive to the sensed atomization spray data for controlling at least one of the atomizing gas pressure and an actuator to adjust the relative position of the gas supply orifice and melt supply in a manner to achieve a desired atomization spray.

  19. Supersonic coal water slurry fuel atomizer

    DOE Patents [OSTI]

    Becker, Frederick E.; Smolensky, Leo A.; Balsavich, John

    1991-01-01

    A supersonic coal water slurry atomizer utilizing supersonic gas velocities to atomize coal water slurry is provided wherein atomization occurs externally of the atomizer. The atomizer has a central tube defining a coal water slurry passageway surrounded by an annular sleeve defining an annular passageway for gas. A converging/diverging section is provided for accelerating gas in the annular passageway to supersonic velocities.

  20. Los Alamos National Laboratory ATOMIC PHOTOGRAPHY ATOMIC PHOTOGRAPHY

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ATOMIC PHOTOGRAPHY ATOMIC PHOTOGRAPHY BLASTS FROM THE PAST BLASTS FROM THE PAST Twenty-five U.S. atmospheric nuclear weapons operations (each a series of tests) were conducted from 1945 to 1963, primarily at the Pacific Proving Grounds and at the Nevada Test Site, southeastern Nevada. Below, observers witness Operation Greenhouse, Eniwetok Atoll, spring 1951. Greenhouse was a series of four tests. 17 Proof of principle for thermonuclear weapons, the 225-kiloton George test, May 8, 1951, of

  1. International Commitments Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-11-18

    This Order establishes a process to manage the Department's International Commitments under the administrative direction of the Office of Policy and International Affairs. No cancellation.

  2. Student Trainee (Engineering)- Intern

    Broader source: Energy.gov [DOE]

    The purpose of the Pathways Intern Employment Program is to provide the intern with exposure to public service, enhance educational experience, and support educational goals. The program is...

  3. Fuel injector nozzle for internal combustion engine

    SciTech Connect (OSTI)

    Klomp, E.D.; Peters, B.D.

    1990-06-12

    This patent describes a fuel injection nozzle for a combustion chamber of an internal combustion engine. It comprises: a nozzle body with at least one fuel flow opening therethrough for feed fuel to the chamber, a resilient diaphragm normally sealing the opening and having orifice means therein for further atomizing and directing the pulses into the chamber, fastening means for fixing the diaphragm to the body so that diaphragm can deflect by a predetermined amount under low engine load operating conditions so that a wide angle cone of atomized fuel is injected into and generally at one end of the combustion chamber for the stratified charge thereof and deflect by an amount greater than the first amount of deflection under high engine load operating conditions. A narrow spray cone of atomized fuel is injected in a deeper pattern into and throughout the combustion chamber for optimizing the charge thereof and fuel burns under the low and high load engine operating conditions.

  4. ATOMIC ENERGY ACT OF 1946

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    D. Niisc AEC Hcadqoartcrs Library Voliiinc I Principal Docriiiiciits U.S. ATOMIC ENERGY COMMISSION WASHINGTON, 1965 PUBLIC LAW 5 8 5 - 7 9 CONQRESS CHAPTER 724-2 ...

  5. Imaging atoms in 3-D

    ScienceCinema (OSTI)

    Ercius, Peter

    2014-06-27

    Berkeley Lab's Peter Ercius discusses "Imaging atoms in 3-D" in this Oct. 28, 2013 talk, which is part of a Science at the Theater event entitled Eight Big Ideas

  6. Efimov physics in cold atoms

    SciTech Connect (OSTI)

    Braaten, Eric . E-mail: braaten@mps.ohio-state.edu; Hammer, H.-W. . E-mail: hammer@itkp.uni-bonn.de

    2007-01-15

    Atoms with a large scattering length have universal low-energy properties that do not depend on the details of their structure or their interactions at short distances. In the 2-atom sector, the universal properties are familiar and depend only on the scattering length. In the 3-atom sector for identical bosons, the universal properties include the existence of a sequence of shallow triatomic molecules called Efimov trimers and log-periodic dependence of scattering observables on the energy and the scattering length. In this review, we summarize the universal results that are currently known. We also summarize the experimental information that is currently available with an emphasis on 3-atom loss processes.

  7. Theoretical studies of atomic transitions

    SciTech Connect (OSTI)

    Fischer, C.F.

    1990-10-01

    This paper discusses: lifetime of excited states; core-polarization studies; large relativistic calculations; Monte Carlo Hartree-Fock (MCHF) atomic structure package; and MCHF codes for the hypercube. (LSP)

  8. UNITED STATES ATOMIC ENERGY COMMISSION

    Office of Legacy Management (LM)

    I(S.0 -01: SPECIAL NUCLEAR MATERIAL LlCEWSE Pursuant to the Atomic Energy Act of 1954 and Title 10, Code of Federal Regulations, Chapter 1, Part 70, "Special Nuclear Material ...

  9. u. S. Atomic Energy Commission

    Office of Legacy Management (LM)

    S. Atomic Energy Commission R. 0. Box 30, Ansonia Station New York ES, N. Y. MATERIALS 5+k& hJf Reference: SK:BL Attention: Mr. R. J. Smith Jr. Director Special Materials Division ...

  10. Laser-cooled atomic ions as probes of molecular ions

    SciTech Connect (OSTI)

    Brown, Kenneth R.; Viteri, C. Ricardo; Clark, Craig R.; Goeders, James E.; Khanyile, Ncamiso B.; Vittorini, Grahame D.

    2015-01-22

    Trapped laser-cooled atomic ions are a new tool for understanding cold molecular ions. The atomic ions not only sympathetically cool the molecular ions to millikelvin temperatures, but the bright atomic ion fluorescence can also serve as a detector of both molecular reactions and molecular spectra. We are working towards the detection of single molecular ion spectra by sympathetic heating spectroscopy. Sympathetic heating spectroscopy uses the coupled motion of two trapped ions to measure the spectra of one ion by observing changes in the fluorescence of the other ion. Sympathetic heating spectroscopy is a generalization of quantum logic spectroscopy, but does not require ions in the motional ground state or coherent control of the ion internal states. We have recently demonstrated this technique using two isotopes of Ca{sup +} [Phys. Rev. A, 81, 043428 (2010)]. Limits of the method and potential applications for molecular spectroscopy are discussed.

  11. Fixation of Radiological Contamination; International Collaborative Development

    SciTech Connect (OSTI)

    Rick Demmer

    2013-03-01

    A cooperative international project was conducted by the Idaho National Laboratory (INL) and the United Kingdoms National Nuclear Laboratory (NNL) to integrate a capture coating with a high performance atomizing process. The initial results were promising, and lead to further trials. The somewhat longer testing and optimization process has resulted in a product that could be demonstrated in the field to reduce airborne radiological dust and contamination.

  12. Atomic vapor laser isotope separation process

    DOE Patents [OSTI]

    Wyeth, Richard W.; Paisner, Jeffrey A.; Story, Thomas

    1990-01-01

    A laser spectroscopy system is utilized in an atomic vapor laser isotope separation process. The system determines spectral components of an atomic vapor utilizing a laser heterodyne technique.

  13. Fundamental Electroweak Studies using Trapped Ions & Atoms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    collaboration performs fundamental electroweak studies on trapped ions & atoms. We use neutral atom and ion trapping techniques at radioactive ion beam facilities here and...

  14. Manhattan Project: Atomic Discoveries, 1890s-1939

    Office of Scientific and Technical Information (OSTI)

    The exact nature of these atoms remained elusive, however, despite centuries of attempts ... Explorations into the nature of the atom from 1919 to 1932 confirmed this new model, ...

  15. Atomic Photography: Blasts from the Past

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Atomic Photography National Security Science Latest Issue:July 2015 past issues All Issues submit Atomic Photography: Blasts from the Past A gallery of images reveals the weird...

  16. Renewable Energy Resources Inc formerly Internal Hydro International...

    Open Energy Info (EERE)

    Inc formerly Internal Hydro International Inc Jump to: navigation, search Name: Renewable Energy Resources Inc (formerly Internal Hydro International Inc) Place: Tampa, Florida...

  17. STEP Intern Job Description

    Broader source: Energy.gov [DOE]

    STEP Intern Job Description, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  18. Atoms for Peace after Fifty Years

    SciTech Connect (OSTI)

    Joeck, N; Lehman, R; Vergino, E; Schock, R

    2004-03-15

    President Eisenhower's hopes for nuclear technology still resonate, but the challenges to fulfilling them are much different today. On December 8, 1953, President Eisenhower, returning from his meeting with the leaders of Britain and France at the Bermuda Summit, flew directly to New York to address the United Nations General Assembly. His presentation, known afterwards as the ''Atoms for Peace'' speech, was bold, broad, and visionary. Eisenhower highlighted dangers associated with the further spread of nuclear weapons and the end of the thermonuclear monopoly, but the president also pointed to opportunities. Earlier that year, Stalin had died and the Korean War armistice was signed. Talks on reunification of Austria were about to begin. The speech sought East-West engagement and outlined a framework for reducing nuclear threats to security while enhancing the civilian benefits of nuclear technology. One specific proposal offered to place surplus military fissile material under the control of an ''international atomic energy agency'' to be used for peaceful purposes, especially economic development. Eisenhower clearly recognized the complex interrelationships between different nuclear technologies and the risks and the benefits that accrue from each. The widespread use of civilian nuclear technology and absence of any use of a nuclear weapon during the next half-century reflects success in his approach. Today, the world faces choices about nuclear technology that have their parallels in the Eisenhower calculus and its legacy. Although his specific fissile material proposal was never implemented, his broader themes gave impetus to agreements such as the nuclear Non-Proliferation Treaty (NPT) and institutions such as the International Atomic Energy Agency (IAEA). The resulting governance process has promoted some and restricted other nuclear technology. Perhaps even more influential was Eisenhower's overarching recommendation that we try to reduce the risks and seek

  19. Atomic memory access hardware implementations

    SciTech Connect (OSTI)

    Ahn, Jung Ho; Erez, Mattan; Dally, William J

    2015-02-17

    Atomic memory access requests are handled using a variety of systems and methods. According to one example method, a data-processing circuit having an address-request generator that issues requests to a common memory implements a method of processing the requests using a memory-access intervention circuit coupled between the generator and the common memory. The method identifies a current atomic-memory access request from a plurality of memory access requests. A data set is stored that corresponds to the current atomic-memory access request in a data storage circuit within the intervention circuit. It is determined whether the current atomic-memory access request corresponds to at least one previously-stored atomic-memory access request. In response to determining correspondence, the current request is implemented by retrieving data from the common memory. The data is modified in response to the current request and at least one other access request in the memory-access intervention circuit.

  20. International Energy: Subject Thesaurus. Revision 1

    SciTech Connect (OSTI)

    Not Available

    1993-11-01

    The International Energy Agency: Subject Thesaurus contains the standard vocabulary of indexing terms (descriptors) developed and structured to build and maintain energy information databases. Involved in this cooperative task are (1) the technical staff of the USDOE Office of Scientific and Technical Information (OSTI) in cooperation with the member countries of the International Energy Agency`s Energy Technology Data Exchange (ETDE) and (2) the International Atomic Energy Agency`s International Nuclear Information System (INIS) staff representing the more than 100 countries and organizations that record and index information for the international nuclear information community. ETDE member countries are also members of INIS. Nuclear information prepared for INIS by ETDE member countries is included in the ETDE Energy Database, which contains the online equivalent of the printed INIS Atomindex. Indexing terminology is therefore cooperatively standardized for use in both information systems. This structured vocabulary reflects thscope of international energy research, development, and technological programs. The terminology of this thesaurus aids in subject searching on commercial systems, such as ``Energy Science & Technology`` by DIALOG Information Services, ``Energy`` by STN International and the ``ETDE Energy Database`` by SilverPlatter. It is also the thesaurus for the Integrated Technical Information System (ITIS) online databases of the US Department of Energy.

  1. Atomizing, continuous, water monitoring module

    DOE Patents [OSTI]

    Thompson, C.V.; Wise, M.B.

    1997-07-08

    A system for continuously analyzing volatile constituents of a liquid is described. The system contains a pump for continuously pumping the liquid to be tested at a predetermined flow rate into an extracting container through a liquid directing tube having an orifice at one end and positioned to direct the liquid into the extracting container at a flow rate sufficient to atomize the liquid within the extracting container. A continuous supply of helium carrier gas at a predetermined flow rate is directed through a tube into the extracting container and co-mingled with the atomized liquid to extract the volatile constituents contained within the atomized liquid. The helium containing the extracted volatile constituents flows out of the extracting container into a mass spectrometer for an analysis of the volatile constituents of the liquid. 3 figs.

  2. Atomizing, continuous, water monitoring module

    DOE Patents [OSTI]

    Thompson, Cyril V.; Wise, Marcus B.

    1997-01-01

    A system for continuously analyzing volatile constituents of a liquid is described. The system contains a pump for continuously pumping the liquid to be tested at a predetermined flow rate into an extracting container through a liquid directing tube having an orifice at one end and positioned to direct the liquid into the extracting container at a flow rate sufficient to atomize the liquid within the extracting container. A continuous supply of helium carrier gas at a predetermined flow rate is directed through a tube into the extracting container and co-mingled with the atomized liquid to extract the volatile constituents contained within the atomized liquid. The helium containing the extracted volatile constituents flows out of the extracting container into a mass spectrometer for an analysis of the volatile constituents of the liquid.

  3. Hot atom chemistry and radiopharmaceuticals

    SciTech Connect (OSTI)

    Krohn, Kenneth A.; Moerlein, Stephen M.; Link, Jeanne M.; Welch, Michael J.

    2012-12-19

    The chemical products made in a cyclotron target are a combined result of the chemical effects of the nuclear transformation that made the radioactive atom and the bulk radiolysis in the target. This review uses some well-known examples to understand how hot atom chemistry explains the primary products from a nuclear reaction and then how radiation chemistry is exploited to set up the optimal product for radiosynthesis. It also addresses the chemical effects of nuclear decay. There are important principles that are common to hot atom chemistry and radiopharmaceutical chemistry. Both emphasize short-lived radionuclides and manipulation of high specific activity nuclides. Furthermore, they both rely on radiochromatographic separation for identification of no-carrieradded products.

  4. Atomic hydrogen in planetary nebulae

    SciTech Connect (OSTI)

    Schneider, S.E.; Silverglate, P.R.; Altschuler, D.R.; Giovanardi, C.

    1987-03-01

    The authors searched for neutral atomic hydrogen associated with 22 planetary nebulae and three evolved stars in the 21 cm line at the Arecibo Observatory. Objects whose radial velocities permitted discrimination from Galactic H I were chosen for observation. Hydrogen was detected in absorption from IC 4997. From the measurements new low limits are derived to the mass of atomic hydrogen associated with the undetected nebulae. Radio continuum observations were also made of several of the nebulae at 12.6 cm. The authors reexamine previous measurements of H I in planetary nebulae, and present the data on a consistent footing. The question of planetary nebula distances is considered at length. Finally, implications of the H I measurements for nebular evolution are discussed and it is suggested that atomic hydrogen seen in absorption was expelled from the progenitor star during the final 1000 yr prior to the onset of ionization. 68 references.

  5. Relativistic atomic beam spectroscopy II

    SciTech Connect (OSTI)

    1989-12-31

    The negative ion of H is one of the simplest 3-body atomic systems. The techniques we have developed for experimental study of atoms moving near speed of light have been productive. This proposal request continuing support for experimental studies of the H{sup -} system, principally at the 800 MeV linear accelerator (LAMPF) at Los Alamos. Four experiments are currently planned: photodetachment of H{sup -} near threshold in electric field, interaction of relativistic H{sup -} ions with matter, high excitations and double charge escape in H{sup -}, and multiphoton detachment of electrons from H{sup -}.

  6. International Energy Statistics - EIA

    Gasoline and Diesel Fuel Update (EIA)

    International > International Energy Statistics International Energy Statistics Petroleum Production | Annual Monthly/Quarterly Consumption | Annual Monthly/Quarterly Capacity | Bunker Fuels | Stocks | Annual Monthly/Quarterly Reserves | Imports | Annual Monthly/Quarterly Exports | CO2 Emissions | Heat Content Natural Gas All Flows | Production | Consumption | Reserves | Imports | Exports | Carbon Dioxide Emissions | Heat Content Coal All Flows | Production | Consumption | Reserves | Imports

  7. Displacement per Atom, Primary Knocked-on Atoms Produced in an Atomic Solid Target

    Energy Science and Technology Software Center (OSTI)

    2015-07-01

    Version 00 DART calculates the total number of displacements, primary knocked-on atoms, recoil spectra, displacement cross sections and displacement per atoms rates in a poly atomic solid target, composed of many different isotopes, using ENDF/B-VI derived cross sections. To calculate these values, different incident particles were considered: neutrons, ions and electrons. The user needs only to specify an incident particle energy spectrum and the composition of the target. The number of displaced atoms is calculatedmore » within the Binary Collision Approximation framework. To calculate the number of displacements the DART code does not use the classical NRT dpa analytical formula, which is only appropriate for projectile and target of the same mass. It numerically solves the linearized Boltzmann equation for a polyatomic target. It can be a useful tool to select the nature and energy of ions or electrons in particle accelerators or electron microscopes to mimic the primary damage induced by neutron irradiation in nuclear plants or fission facilities. Nuclear data: • Typically any ENDFB format evaluation may be used. This package includes the ENDFB-VI nuclear data library. Energy ranges: • Neutron or ion : 10E-11 to 20 MeV Data library distributed with DART v1.0: • ENDFB-VI nuclear data library« less

  8. The Modified Embedded Atom Method

    SciTech Connect (OSTI)

    Baskes, M.I.

    1994-08-01

    Recent modifications have been made to generalize the Embedded Atom Method (EAM) to describe bonding in diverse materials. By including angular dependence of the electron density in an empirical way, the Modified Embedded Atom Method (MEAM) has been able to reproduce the basic energetic and structural properties of 45 elements. This method is ideally suited for examining the interfacial behavior of dissimilar materials. This paper explains in detail the derivation of the method, shows how the parameters of the MEAM are determined directly from experiment or first principles calculations, and examines the quality of the reproduction of the database. Materials with fcc, bcc, hcp, and diamond cubic crystal structure are discussed. A few simple examples of the application of the MEAM to surfaces and interfaces are presented. Calculations of pullout of a SiC fiber in a diamond matrix as a function of applied stress show non-uniform deformation of the fiber.

  9. Atomic vapor laser isotope separation process

    DOE Patents [OSTI]

    Wyeth, R.W.; Paisner, J.A.; Story, T.

    1990-08-21

    A laser spectroscopy system is utilized in an atomic vapor laser isotope separation process. The system determines spectral components of an atomic vapor utilizing a laser heterodyne technique. 23 figs.

  10. Princeton Plasma Physics Lab - General Atomics (GA)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    general-atomics-ga General Atomics en The Scorpion's Strategy: "Catch and Subdue" http:www.pppl.govnode1132

  11. The Atomic Energy Commission By Alice Buck

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Atomic Energy Commission By Alice Buck July 1983 U.S. Department of Energy Office of Management Office of the Executive Secretariat Office of History and Heritage Resources 1 Introduction Almost a year after World War II ended, Congress established the United States Atomic Energy Commission to foster and control the peacetime development of atomic science and technology. Reflecting America's postwar optimism, Congress declared that atomic energy should be employed not only in the Nation's

  12. How Atomic Vibrations Transform Vanadium Dioxide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    How Atomic Vibrations Transform Vanadium Dioxide How Atomic Vibrations Transform Vanadium Dioxide Calculations Confirm Material's Potential for Next-Generation Electronics, Energy November 10, 2014 Contact: Dawn Levy, levyd@ornl.gov, 865.576.6448 Budaivibe Vanadium atoms (blue) have unusually large thermal vibrations that stabilize the metallic state of a vanadium dioxide crystal. Red depicts oxygen atoms. Image credit: Oak Ridge National Laboratory For more than 50 years, scientists have

  13. Internal Josephson oscillations for distinct momenta Bose-Einstein condensates

    SciTech Connect (OSTI)

    Lim, Lih-King [Institute for Theoretical Physics, Utrecht University, Leuvenlaan 4, 3584 CE Utrecht (Netherlands); Laboratoire de Physique des Solides, CNRS UMR 8502, Universite Paris-Sud, F-91405 Orsay Cedex (France); Troppenz, T.; Morais Smith, C. [Institute for Theoretical Physics, Utrecht University, Leuvenlaan 4, 3584 CE Utrecht (Netherlands)

    2011-11-15

    The internal Josephson oscillations between an atomic Bose-Einstein condensate (BEC) and a molecular one are studied for atoms in a square optical lattice subjected to a staggered gauge field. The system is described by a Bose-Hubbard model with complex and anisotropic hopping parameters that are different for each species, i.e., atoms and molecules. When the flux per plaquette for each species is small, the system oscillates between two conventional zero-momentum condensates. However, there is a regime of parameters in which Josephson oscillations between a vortex-carrying atomic condensate (finite momentum BEC) and a conventional zero-momentum molecular condensate may be realized. The experimental observation of the oscillations between these qualitatively distinct BEC's is possible with state-of-the-art Ramsey interference techniques.

  14. International safeguards data authentication

    SciTech Connect (OSTI)

    Melton, R.B.; Smith, C.E.; DeLand, S.M.; Manatt, D.R.

    1996-07-01

    The International Safeguards community is becoming increasingly reliant on information stored in electronic form. In international monitoring and related activities it must be possible to verify and maintain the integrity of this electronic information. This paper discusses the use of data authentication technology to assist in accomplishing this task. The paper provides background information, identifies the relevance to international safeguards, discusses issues related to export controls, algorithm patents, key management and the use of commercial vs. custom software.

  15. Internal Revenue Service

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ode X SCHEDULE A (Form 5500) Department of the Treasury Internal Revenue Service Department of Labor Employee Benefits Security Administration Pension Benefit...

  16. International Subcommittee Report

    Broader source: Energy.gov (indexed) [DOE]

    Report Dr. Regis A. Matzie, Chair NEAC Meeting December 10, 2014 1 Externalities of Nuclear Power Important International Considerations Safety - because of the potential...

  17. International petroleum statistics report

    SciTech Connect (OSTI)

    1996-08-01

    This report provides information on current international petroleum production, demand, imports, and stocks. World oil demand and OECD demand data are presented for the years 1970 thru 1995.

  18. Native Intern Profile Page

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The intern will work with the executive management teams to solve other problems as they arise. Morgan Gray Tribal A liation: Chickasaw Nation University: Oklahoma State University ...

  19. EM International. Volume 1

    SciTech Connect (OSTI)

    Not Available

    1993-07-01

    It is the intent of EM International to describe the Office of Environmental Restoration and Waste Management`s (EM`s) various roles and responsibilities within the international community. Cooperative agreements and programs, descriptions of projects and technologies, and synopses of visits to international sites are all highlighted in this semiannual journal. Focus on EM programs in this issue is on international collaboration in vitrification projects. Technology highlights covers: in situ sealing for contaminated sites; and remote sensors for toxic pollutants. Section on profiles of countries includes: Arctic contamination by the former Soviet Union, and EM activities with Germany--cooperative arrangements.

  20. Atomic Structure Calculations from the Los Alamos Atomic Physics Codes

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Cowan, R. D.

    The well known Hartree-Fock method of R.D. Cowan, developed at Los Alamos National Laboratory, is used for the atomic structure calculations. Electron impact excitation cross sections are calculated using either the distorted wave approximation (DWA) or the first order many body theory (FOMBT). Electron impact ionization cross sections can be calculated using the scaled hydrogenic method developed by Sampson and co-workers, the binary encounter method or the distorted wave method. Photoionization cross sections and, where appropriate, autoionizations are also calculated. Original manuals for the atomic structure code, the collisional excitation code, and the ionization code, are available from this website. Using the specialized interface, you will be able to define the ionization stage of an element and pick the initial and final configurations. You will be led through a series of web pages ending with a display of results in the form of cross sections, collision strengths or rates coefficients. Results are available in tabular and graphic form.

  1. QUANTUM MECHANICS, GENERAL PHYSICS; 74 ATOMIC AND MOLECULAR PHYSICS...

    Office of Scientific and Technical Information (OSTI)

    of model atoms in fields Milonni, P.W. 71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS; 74 ATOMIC AND MOLECULAR PHYSICS; ATOMS; OPTICAL MODELS; QUANTUM MECHANICS;...

  2. International Program Action Table - October 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Communication & Engagement International Programs International Program Action Table - October 2012 International Program Action Table - October 2012 International Program ...

  3. NEAC International Subcommittee Recommendations

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Subcommittee Recommendations December 2014 Background Externalities of nuclear power are major considerations in the international arena. These externalities are primarily geopolitical considerations and considerations related to: * Safety of nuclear power plants - because of the potential impact that severe accidents can have on the nuclear industry globally; * Energy security - particularly in countries with little domestic energy resources because of the stable and reliable

  4. Sensing mode atomic force microscope

    DOE Patents [OSTI]

    Hough, Paul V. C.; Wang, Chengpu

    2006-08-22

    An atomic force microscope is described having a cantilever comprising a base and a probe tip on an end opposite the base; a cantilever drive device connected to the base; a magnetic material coupled to the probe tip, such that when an incrementally increasing magnetic field is applied to the magnetic material an incrementally increasing force will be applied to the probe tip; a moveable specimen base; and a controller constructed to obtain a profile height of a specimen at a point based upon a contact between the probe tip and a specimen, and measure an adhesion force between the probe tip and the specimen by, under control of a program, incrementally increasing an amount of a magnetic field until a release force, sufficient to break the contact, is applied. An imaging method for atomic force microscopy involving measuring a specimen profile height and adhesion force at multiple points within an area and concurrently displaying the profile and adhesion force for each of the points is also described. A microscope controller is also described and is constructed to, for a group of points, calculate a specimen height at a point based upon a cantilever deflection, a cantilever base position and a specimen piezo position; calculate an adhesion force between a probe tip and a specimen at the point by causing an incrementally increasing force to be applied to the probe tip until the probe tip separates from a specimen; and move the probe tip to a new point in the group.

  5. Sensing mode atomic force microscope

    DOE Patents [OSTI]

    Hough, Paul V. C.; Wang, Chengpu

    2003-01-01

    An atomic force microscope utilizes a pulse release system and improved method of operation to minimize contact forces between a probe tip affixed to a flexible cantilever and a specimen being measured. The pulse release system includes a magnetic particle affixed proximate the probe tip and an electromagnetic coil. When energized, the electromagnetic coil generates a magnetic field which applies a driving force on the magnetic particle sufficient to overcome adhesive forces exhibited between the probe tip and specimen. The atomic force microscope includes two independently displaceable piezo elements operable along a Z-axis. A controller drives the first Z-axis piezo element to provide a controlled approach between the probe tip and specimen up to a point of contact between the probe tip and specimen. The controller then drives the first Z-axis piezo element to withdraw the cantilever from the specimen. The controller also activates the pulse release system which drives the probe tip away from the specimen during withdrawal. Following withdrawal, the controller adjusts the height of the second Z-axis piezo element to maintain a substantially constant approach distance between successive samples.

  6. Sensing mode atomic force microscope

    DOE Patents [OSTI]

    Hough, Paul V.; Wang, Chengpu

    2004-11-16

    An atomic force microscope is described having a cantilever comprising a base and a probe tip on an end opposite the base; a cantilever drive device connected to the base; a magnetic material coupled to the probe tip, such that when an incrementally increasing magnetic field is applied to the magnetic material an incrementally increasing force will be applied to the probe tip; a moveable specimen base; and a controller constructed to obtain a profile height of a specimen at a point based upon a contact between the probe tip and a specimen, and measure an adhesion force between the probe tip and the specimen by, under control of a program, incrementally increasing an amount of a magnetic field until a release force, sufficient to break the contact, is applied. An imaging method for atomic force microscopy involving measuring a specimen profile height and adhesion force at multiple points within an area and concurrently displaying the profile and adhesion force for each of the points is also described. A microscope controller is also described and is constructed to, for a group of points, calculate a specimen height at a point based upon a cantilever deflection, a cantilever base position and a specimen piezo position; calculate an adhesion force between a probe tip and a specimen at the point by causing an incrementally increasing force to be applied to the probe tip until the probe tip separates from a specimen; and move the probe tip to a new point in the group.

  7. REVIEW OF THE NEGOTIATION OF THE MODEL PROTOCOL ADDITIONAL TO THE AGREEMENT(S) BETWEEN STATE(S) AND THE INTERNATIONAL ATOMIC ENERGY AGENCY FOR THE APPLICATION OF SAFEGUARDS, INFCIRC/540 (Corrected) VOLUME II/III IAEA COMMITTEE 24, Major Issues Underlying the Model Additional Protocol (1996-1997).

    SciTech Connect (OSTI)

    Rosenthal, M.D.; Saum-Manning, L.; Houck, F.

    2010-01-01

    Volume I of this Review traces the origins of the Model Additional Protocol. It covers the period from 1991, when events in Iraq triggered an intensive review of the safeguards system, until 1996, when the IAEA Board of Governors established Committee 24 to negotiate a new protocol to safeguards agreement. The period from 1991-1996 set the stage for this negotiation and shaped its outcome in important ways. During this 5-year period, many proposals for strengthening safeguards were suggested and reviewed. Some proposals were dropped, for example, the suggestion by the IAEA Secretariat to verify certain imports, and others were refined. A rough consensus was established about the directions in which the international community wanted to go, and this was reflected in the draft of an additional protocol that was submitted to the IAEA Board of Governors on May 6, 1996 in document GOV/2863, Strengthening the Effectiveness and Improving the Efficiency of the Safeguards System - Proposals For Implementation Under Complementary Legal Authority, A Report by the Director General. This document ended with a recommendation that, 'the Board, through an appropriate mechanism, finalize the required legal instrument taking as a basis the draft protocol proposed by the Secretariat and the explanation of the measures contained in this document.'

  8. Truman Signs Atomic Energy Act | National Nuclear Security Administration |

    National Nuclear Security Administration (NNSA)

    (NNSA) Truman Signs Atomic Energy Act Truman Signs Atomic Energy Act Washington, DC President Truman signs the Atomic Energy Act of 1946, leading to the creation of the Atomic Energy Commission

  9. International energy annual 1996

    SciTech Connect (OSTI)

    1998-02-01

    The International Energy Annual presents an overview of key international energy trends for production, consumption, imports, and exports of primary energy commodities in over 220 countries, dependencies, and areas of special sovereignty. Also included are population and gross domestic product data, as well as prices for crude oil and petroleum products in selected countries. Renewable energy reported in the International Energy Annual includes hydroelectric power, geothermal, solar, and wind electric power, biofuels energy for the US, and biofuels electric power for Brazil. New in the 1996 edition are estimates of carbon dioxide emissions from the consumption of petroleum and coal, and the consumption and flaring of natural gas. 72 tabs.

  10. International petroleum statistics report

    SciTech Connect (OSTI)

    1995-10-01

    The International Petroleum Statistics Report is a monthly publication that provides current international oil data. This report presents data on international oil production, demand, imports, exports and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). Section 2 presents an oil supply/demand balance for the world, in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

  11. Dynamics and quantum entanglement of two-level atoms in de Sitter spacetime

    SciTech Connect (OSTI)

    Tian, Zehua; Jing, Jiliang

    2014-11-15

    In the framework of open quantum systems, we study the internal dynamics of both freely falling and static two-level atoms interacting with quantized conformally coupled massless scalar field in de Sitter spacetime. We find that the atomic transition rates depend on both the nature of de Sitter spacetime and the motion of atoms, interestingly the steady states for both cases are always driven to being purely thermal, regardless of the atomic initial states. This thermalization phenomenon is structurally similar to what happens to an elementary quantum system immersed in a thermal field, and thus reveals the thermal nature of de Sitter spacetime. Besides, we find that the thermal baths will drive the entanglement shared by the freely falling atom (the static atom) and its auxiliary partner, a same two-level atom which is isolated from external fields, to being sudden death, and the proper time for the entanglement to be extinguished is computed. We also analyze that such thermalization and disentanglement phenomena, in principle, could be understood from the perspective of table-top simulation experiment.

  12. Hyperbaric Hydrothermal Atomic Force Microscope

    DOE Patents [OSTI]

    Knauss, Kevin G.; Boro, Carl O.; Higgins, Steven R.; Eggleston, Carrick M.

    2003-07-01

    A hyperbaric hydrothermal atomic force microscope (AFM) is provided to image solid surfaces in fluids, either liquid or gas, at pressures greater than normal atmospheric pressure. The sample can be heated and its surface imaged in aqueous solution at temperatures greater than 100.degree. C. with less than 1 nm vertical resolution. A gas pressurized microscope base chamber houses the stepper motor and piezoelectric scanner. A chemically inert, flexible membrane separates this base chamber from the sample cell environment and constrains a high temperature, pressurized liquid or gas in the sample cell while allowing movement of the scanner. The sample cell is designed for continuous flow of liquid or gas through the sample environment.

  13. Hyperbaric hydrothermal atomic force microscope

    DOE Patents [OSTI]

    Knauss, Kevin G.; Boro, Carl O.; Higgins, Steven R.; Eggleston, Carrick M.

    2002-01-01

    A hyperbaric hydrothermal atomic force microscope (AFM) is provided to image solid surfaces in fluids, either liquid or gas, at pressures greater than normal atmospheric pressure. The sample can be heated and its surface imaged in aqueous solution at temperatures greater than 100.degree. C. with less than 1 nm vertical resolution. A gas pressurized microscope base chamber houses the stepper motor and piezoelectric scanner. A chemically inert, flexible membrane separates this base chamber from the sample cell environment and constrains a high temperature, pressurized liquid or gas in the sample cell while allowing movement of the scanner. The sample cell is designed for continuous flow of liquid or gas through the sample environment.

  14. Internal Controls Evaluations

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4, 2016 U.S. DEPARTMENT OF ENERGY Internal Control Evaluations Fiscal Year 2016 Guidance Page | 2 Table of Contents I. Introduction .............................................................................................................................................. 4 A. Background ......................................................................................................................................... 4 B. New for FY

  15. International resources law

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    This book covers: Historical origins of civil code legal systems; Modern civil law practice for mineral lawyers; Treaties and agreements for protection of international investments; Europe 1992-toward a single energy market; Dispute resolution in international agreements; Assessment of political risk; Reducing political risk; Protecting mineral investments from upheaval in developing countries; Typical world petroleum arrangements; government take in the Pacific Rim - Papua New Guinea; Mineral base of the USSR and prospects of investment; International taxation for the mining practitioner; Tax considerations - branch versus subsidiary; Doing business in the host country - nontax considerations; Impact of host-country laws on operations and profits; Mineral development and native rights - New Zealand; Designing the investment vehicle: mining; International oil and gas joint ventures; Selected U.S. laws with extraterritorial effect; U.S. tax and securities laws applied to foreign joint venturers; and Extraterritorial effect of U.S. laws.

  16. Internal Patent Instructions

    Broader source: Energy.gov [DOE]

    The internal patent instructions (IPIs) were originally established as a means for providing a common reference source to all patent counsel offices on centralized instructions, as stated in the...

  17. NEMS International Energy Module

    Gasoline and Diesel Fuel Update (EIA)

    EIA NEMS International Energy Module Model Documentation Report vii Mr. G. Daniel Butler U.S. Department of Energy EI-812 1000 Independence Ave., SW Washington, DC 20585 Tel:...

  18. International Energy Module

    Gasoline and Diesel Fuel Update (EIA)

    EIA NEMS International Energy Module Model Documentation Report vii Mr. G. Daniel Butler U.S. Department of Energy EI-812 1000 Independence Ave., SW Washington, DC 20585 Tel:...

  19. International petroleum statistics report

    SciTech Connect (OSTI)

    1996-03-01

    This report presents data on international oil production, demand, imports, exports, and stocks. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

  20. International petroleum statistics report

    SciTech Connect (OSTI)

    1996-12-01

    This report presents data on international oil production, demand, imports, and stocks. World oil production and OECD demand data are for the years 1970 through 1995; stocks from 1973 through 1995, and trade from 1985 through 1995.

  1. International Energy Module

    Gasoline and Diesel Fuel Update (EIA)

    self-contained units which are linked by an integrating mechanism. The NEMS International Energy Module (IEM) computes world oil prices, provides a set of crude oil and refined...

  2. HydroVision International

    Broader source: Energy.gov [DOE]

    The HydroVision International Conference and Exhibition offers attendees countless opportunities to network, share best practices, meet with product and service providers, and more.  Held over five...

  3. NNSA and IAEA Hold the 20th International Training Course on Nuclear

    National Nuclear Security Administration (NNSA)

    Material Accounting and Control | National Nuclear Security Administration | (NNSA) and IAEA Hold the 20th International Training Course on Nuclear Material Accounting and Control May 05, 2015 Washington, D.C. - The National Nuclear Security Administration (NNSA) and the International Atomic Energy Agency (IAEA) are hosting 35 representatives from 30 countries at Oak Ridge National Laboratory in Oak Ridge, Tennessee, from April 26 to May 8, 2015 for the 20th International Training Course

  4. NNSA and IAEA Celebrate the 25th International Training Course | National

    National Nuclear Security Administration (NNSA)

    Nuclear Security Administration | (NNSA) and IAEA Celebrate the 25th International Training Course April 17, 2015 Washington, D.C. -The National Nuclear Security Administration (NNSA) and the International Atomic Energy Agency (IAEA) will host 44 people from 33 countries at the Sandia National Laboratories in Albuquerque, New Mexico, from April 20 to May 8, 2015 for the 25th International Training Course (ITC) on the Physical Protection of Nuclear Material and Nuclear Facilities. The ITC is

  5. Internal combustion engine

    SciTech Connect (OSTI)

    Bernauer, O.

    1980-10-07

    An internal combustion engine is described that has walls delimiting the working space or spaces of the internal combustion engine, in which a hydrogen-impervious, encapsulated metal hydride storage device is provided which is in heat-conducting contact with these walls; the interior of the encapsulation is adapted to be selectively connected to a source of hydrogen and/or to a separate further hydrogen storage device.

  6. International petroleum statistics report

    SciTech Connect (OSTI)

    Not Available

    1994-05-01

    This monthly publication provides current international oil data. The Report presents data on international oil production, demand, imports, exports, and stocks. Section 1 contains time series data on world oil production, and on oil demand and stocks in the OECD. Section 2 presents an oil supply/demand balance for the world. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

  7. International petroleum development agreements

    SciTech Connect (OSTI)

    Smith, E.E.

    1993-12-31

    There are recognizable legal elements in all of the international arrangements for petroleum development currently in use but no arrangements are exactly like the typical American oil and gas lease. This article discusses differences and approaches to the differences in legal aspects of international petroleum development agreements. Topics covered include the following: oil and national sovereignty; obtaining a development agreement; concession and production sharing agreements; participation; differences among agreements.

  8. International Energy Outlook 2016

    U.S. Energy Information Administration (EIA) Indexed Site

    484(2016) I May 2016 International Energy Outlook 2016 ~ Independent Statistics & Ana[ysis e~ ~* a~ 1 U.S. ~~ergy. Information Administration Contacts The International Energy Outlook 2016 was prepared by the U.S. Energy Information Administration (EIA) under the direction of John Conti, Assistant Administrator for Energy Analysis (john.conti@eia.gov, 202-586-2222); Paul Holtberg, Team Leader, Analysis Integration Team (paul.holtberg@eia.gov, 202-586-1284); Jim Diefenderfer, Director, Office

  9. (International meetings on ecology)

    SciTech Connect (OSTI)

    DeAngelis, D.L.; Garten, C.T. Jr.; Turner, M.G.

    1990-09-25

    the travelers attended the Fifth International Congress of Ecology (INTECOL) in Yokohama, Japan, and two presented invited papers and chaired symposia. One traveler also attended the OJI International Seminar in Gifu, Japan and the Fukuoka Symposium on Theoretical Ecology in Fukuoka, Japan and presented invited papers. At these scientific gatherings, a large number of symposia and specific presentations were relevant to current research at Oak Ridge National Laboratory (ORNL), especially in the areas of landscape dynamics, plant physiology, and aquatic ecosystems.

  10. International Energy Agency

    Broader source: Energy.gov [DOE]

    DOE's market transformation efforts have reached to European and other countries who are part of the international distributed and decentralized energy community. Through its partnership with DOE, the combined heat and power (CHP) program of the International Energy Agency (IEA) conducts research and analysis of CHP markets and deployment efforts around the world and has used lessons learned from U.S. research, development, and deployment efforts to recommend market transformation activities and policies that will lead to new CHP installations worldwide.

  11. The Manhattan Project: Making the Atomic Bomb | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Manhattan Project: Making the Atomic Bomb The Manhattan Project: Making the Atomic Bomb This report is an account of work on the atomic bomb. The Manhattan Project: Making the Atomic Bomb (6.17 MB) More Documents & Publications Gosling, The Manhattan Project: Making the Atomic Bomb The_Manhattan_Project_2010.pdf The Manhattan Project: Making of the Atomic Bomb

  12. Method for enhanced atomization of liquids

    DOE Patents [OSTI]

    Thompson, Richard E.; White, Jerome R.

    1993-01-01

    In a process for atomizing a slurry or liquid process stream in which a slurry or liquid is passed through a nozzle to provide a primary atomized process stream, an improvement which comprises subjecting the liquid or slurry process stream to microwave energy as the liquid or slurry process stream exits the nozzle, wherein sufficient microwave heating is provided to flash vaporize the primary atomized process stream.

  13. Atomicity violation detection using access interleaving invariants

    DOE Patents [OSTI]

    Zhou, Yuanyuan; Lu, Shan; Tucek, Joseph Andrew

    2013-09-10

    During execution of a program, the situation where the atomicity of a pair of instructions that are to be executed atomically is violated is identified, and a bug is detected as occurring in the program at the pair of instructions. The pairs of instructions that are to be executed atomically can be identified in different manners, such as by executing a program multiple times and using the results of those executions to automatically identify the pairs of instructions.

  14. Integrated Nanosystems for Atomically Precise Manufacturing Workshop -

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    August 5-6, 2015 | Department of Energy Nanosystems for Atomically Precise Manufacturing Workshop - August 5-6, 2015 Integrated Nanosystems for Atomically Precise Manufacturing Workshop - August 5-6, 2015 The US Department of Energy (DOE) Advanced Manufacturing Office (AMO) hosted a Workshop on Integrated Nanosystems for Atomically Precise Manufacturing (INFAPM) in Berkeley, California, August 5-6, 2015. DOE invited representatives from academia, national labs, the Executive Office of the

  15. Collisionally induced atomic clock shifts and correlations

    SciTech Connect (OSTI)

    Band, Y. B.; Osherov, I.

    2011-07-15

    We develop a formalism to incorporate exchange symmetry considerations into the calculation of collisional frequency shifts for atomic clocks using a density-matrix formalism. The formalism is developed for both fermionic and bosonic atomic clocks. Numerical results for a finite-temperature {sup 87}Sr {sup 1}S{sub 0} (F=9/2) atomic clock in a magic wavelength optical lattice are presented.

  16. International Activities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Activities International Activities International Activities The International Program assists the DOE Office of Environmental Management (EM) in identifying technologies and strategies for waste processing, groundwater and soil remediation, spent nuclear fuel and surplus nuclear material disposition, and facility deactivation and decommissioning. The International Program seeks to transform advances in science and engineering into practical solutions for environmental remediation.

  17. Calculating Atomic Number Densities for Uranium

    Energy Science and Technology Software Center (OSTI)

    1993-01-01

    Provides method to calculate atomic number densities of selected uranium compounds and hydrogenous moderators for use in nuclear criticality safety analyses at gaseous diffusion uranium enrichment facilities.

  18. Atomic Scale Characterization of Compound Semiconductors using...

    Office of Scientific and Technical Information (OSTI)

    more fundamental understanding of carrier dynamics in photovoltaic (PV) device structures. ... Applying these improved analysis conditions to III-V based PV gives an atomic scale ...

  19. Manhattan Project: Adventures Inside the Atom

    Office of Scientific and Technical Information (OSTI)

    This publication was produced at the request of the the Assistant Manager for Public Education, Oak Ridge Operations Office, Atomic Energy Commission. It is reproduced here via the ...

  20. Circuits of Atoms on Wires of Light

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Circuits of Atoms on Wires of Light 1663 Los Alamos science and technology magazine Latest Issue:July 2016 past issues All Issues » submit Circuits of Atoms on Wires of Light A new kind of circuitry-with electrons on conducting wires replaced by atoms on paths of laser light-is ushering in an era of "atomtronic" technology. March 8, 2016 Artist visualization of atomic circuits Los Alamos scientists have developed a reliable new way to create atomtronic circuits with waves of

  1. Atomic Scale Characterization of Compound Semiconductors using...

    Office of Scientific and Technical Information (OSTI)

    Country of Publication: United States Language: English Subject: 14 SOLAR ENERGY; 36 MATERIALS SCIENCE; ALLOYS; ATOMS; DATA ACQUISITION; DIFFUSION; FUNCTIONALS; HEAT FLUX; ...

  2. Optimizing Atomic Neighborhoods for Speedier Chemical Reactions...

    Office of Science (SC) Website

    processes involved in energy production and pollution control. Employing in-operation tools to atomic-level interactions in palladium-based catalysts enhances the discovery and...

  3. Atom-split it for nuclear energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    adjustments were provided by the 'Calutron Girls' Seaborg-Chairman of the Atomic Energy Commission 1961-1971; discovered many elements Buckyball-Buckminsterfullerene; 60...

  4. CERTIFICATION DOCKET WESTINGHOUSE ATOMIC POWER DEVELOPMENT PLANT

    Office of Legacy Management (LM)

    ... A survey cf the area of the "L' Building was performed and consisted of gamma-ray ... - Statement of Certification Westinghouse Atomic Power Development Plant East Pittsburgh ...

  5. Conduction of molecular electronic devices: Qualitative insights through atom-atom polarizabilities

    SciTech Connect (OSTI)

    Stuyver, T.; Fias, S. De Proft, F.; Geerlings, P.; Fowler, P. W.

    2015-03-07

    The atom-atom polarizability and the transmission probability at the Fermi level, as obtained through the source-and-sink-potential method for every possible configuration of contacts simultaneously, are compared for polycyclic aromatic compounds. This comparison leads to the conjecture that a positive atom-atom polarizability is a necessary condition for transmission to take place in alternant hydrocarbons without non-bonding orbitals and that the relative transmission probability for different configurations of the contacts can be predicted by analyzing the corresponding atom-atom polarizability. A theoretical link between the two considered properties is derived, leading to a mathematical explanation for the observed trends for transmission based on the atom-atom polarizability.

  6. Sub-Angstrom Atomic-Resolution Imaging of Heavy Atoms to Light...

    Office of Scientific and Technical Information (OSTI)

    of Heavy Atoms to Light Atoms Citation Details In-Document Search ... Publication Date: 2003-05-23 OSTI Identifier: 822959 Report Number(s): LBNL--52090 Journal ID: ISSN ...

  7. Atomic magnetometer for human magnetoencephalograpy.

    SciTech Connect (OSTI)

    Schwindt, Peter; Johnson, Cort N.

    2010-12-01

    We have developed a high sensitivity (<5 fTesla/{radical}Hz), fiber-optically coupled magnetometer to detect magnetic fields produced by the human brain. This is the first demonstration of a noncryogenic sensor that could replace cryogenic superconducting quantum interference device (SQUID) magnetometers in magnetoencephalography (MEG) and is an important advance in realizing cost-effective MEG. Within the sensor, a rubidium vapor is optically pumped with 795 laser light while field-induced optical rotations are measured with 780 nm laser light. Both beams share a single optical axis to maximize simplicity and compactness. In collaboration with neuroscientists at The Mind Research Network in Albuquerque, NM, the evoked responses resulting from median nerve and auditory stimulation were recorded with the atomic magnetometer and a commercial SQUID-based MEG system with signals comparing favorably. Multi-sensor operation has been demonstrated with two AMs placed on opposite sides of the head. Straightforward miniaturization would enable high-density sensor arrays for whole-head magnetoencephalography.

  8. Carbon International | Open Energy Information

    Open Energy Info (EERE)

    International Jump to: navigation, search Name: Carbon International Place: London, United Kingdom Zip: NW1 8LH Sector: Carbon Product: London-based energy and communications...

  9. Student Trainee (Engineering)- Intern NTE

    Broader source: Energy.gov [DOE]

    The purpose of the Pathways Intern Employment Program is to provide the intern with exposure to public service, enhance educational experience, and support educational goals. The program is...

  10. BBI International | Open Energy Information

    Open Energy Info (EERE)

    BBI International Jump to: navigation, search Name: BBI International Place: Salida, Colorado Zip: 81201 Sector: Biofuels Product: Information service provider for the Biofuels...

  11. OK International | Open Energy Information

    Open Energy Info (EERE)

    OK International Jump to: navigation, search Name: OK International Address: san francisco Place: San Francisco, California Website: www.okinternational.org Coordinates:...

  12. Biofuels International | Open Energy Information

    Open Energy Info (EERE)

    International Jump to: navigation, search Name: Biofuels International Place: Indiana Sector: Biofuels Product: Pittsburgh based biofuels project developer presently developing a...

  13. Edison International | Open Energy Information

    Open Energy Info (EERE)

    International Jump to: navigation, search Name: Edison International Place: Rosemead, California Zip: 91770 Product: Utility company and parent of SCE and Edison Mission Energy....

  14. Basic research in crystalline and noncrystalline ceramic systems. Annual report, November 1, 1981-November 30, 1982

    SciTech Connect (OSTI)

    Not Available

    1982-01-01

    Research activities are described concerning the electrical and optical properties of ceramics; kinetic studies; defect structures; defect interactions, grain boundaries and surfaces; sintering studies; and technological research needs in ceramic science.

  15. Basic research in crystalline and noncrystalline ceramic systems. Annual report, August 1, 1979-October 31, 1980

    SciTech Connect (OSTI)

    Sempolinski, D. R.; Kingery, W. D.; Tuller, H. L.; Diear, J. M.; Dudney, N. J.; Coble, R. L.; French, R.; Cheng, K. W.; Giraldez, E.; Henriksen, A. F.; Kijima, K.; Gattuso, T. R.; Dolhert, L.; Gambino, J.; Yager, T. A.; Chiang, Y. M.; Tajima, Y.; Dynys, J. M.; Cannon, Jr., R. M.; Kuo-Wen, Tsui; Hong, W.; Handwerker, C. A.; Schneibel, J. H.; Zelinski, B.

    1980-01-01

    The Basic Research Programs in Ceramics supports a significant fraction of the research effort and graduate student training in ceramics at M.I.T. The importance of basic research programs in ceramics processing and properties is becoming widely recognized as the critical role of improved ceramic materials for energy systems is acknowledged. The needs identified in the 1977 series of workshops on DOE programs in energy-related materials research and by the ongoing efforts of the DOE Council on Materials Science are being translated into the basic and applied research necessary to fulfill the established objectives in the effort to solve the nation's energy problems. Present indications are that ceramics in numerous applications will be critical in meeting national energy requirements.

  16. International energy annual 1997

    SciTech Connect (OSTI)

    1999-04-01

    The International Energy Annual presents an overview of key international energy trends for production, consumption, imports, and exports of primary energy commodities in over 220 countries, dependencies, and areas of special sovereignty. Also included are population and gross domestic product data, as well as prices for crude oil and petroleum products in selected countries. Renewable energy reported in the International Energy Annual includes hydroelectric power and geothermal, solar, and wind electric power. Also included are biomass electric power for Brazil and the US, and biomass, geothermal, and solar energy produced in the US and not used for electricity generation. This report is published to keep the public and other interested parties fully informed of primary energy supplies on a global basis. The data presented have been largely derived from published sources. The data have been converted to units of measurement and thermal values (Appendices E and F) familiar to the American public. 93 tabs.

  17. International energy outlook 1994

    SciTech Connect (OSTI)

    Not Available

    1994-07-01

    The International Energy Outlook 1994 (IEO94) presents an assessment by the Energy Information Administration (EIA) of the outlook for international energy markets between 1990 and 2010. The report is provided as a statistical service to assist energy managers and analysts, both in government and in the private sector. These forecasts are used by international agencies, Federal and State governments, trade associations, and other planners and decisionmakers. They are published pursuant to the Depart. of Energy Organization Act of 1977 (Public Law 95-91), Section 205(c). The IEO94 projections are based on US and foreign government policies in effect on October 1, 1993-which means that provisions of the Climate Change Action Plan unveiled by the Administration in mid-October are not reflected by the US projections.

  18. Atomic Layer Deposition | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Atomic Layer Deposition New nanophase thin film materials with properties tailored to specifically meet the needs of industry New software simulates ALD over multiple length scale, saving industry time and money on developing specialized tools PDF icon Atomic_Layer_Deposition

  19. Earth shelter goes international

    SciTech Connect (OSTI)

    Boyer, L.L.

    1983-06-01

    Since the mid-1970's earth sheltered buildings in the US have become more numerous and important as a contemporary passive building concept. Further, an intense international interest has now developed, as evidenced by a number of important activities. One of these events is the 1983 International Conference on Energy Efficient Buildings with Earth Shelter Protection to be conducted during 1-6 August in Sydney, Australia. A review of past activities leading up to this event, as well as a brief review of the conference program, is the subject of this discussion.

  20. INTERNAL CUTTING DEVICE

    DOE Patents [OSTI]

    Russell, W.H. Jr.

    1959-06-30

    A device is described for removing material from the interior of a hollow workpiece so as to form a true spherical internal surface in a workpiece, or to cut radial slots of an adjustable constant depth in an already established spherical internal surface. This is accomplished by a spring loaded cutting tool adapted to move axially wherein the entire force urging the tool against the workpiece is derived from the spring. Further features of importance involve the provision of a seal between the workpiece and the cutting device and a suction device for carrying away particles of removed material.

  1. International petroleum statistics report

    SciTech Connect (OSTI)

    Not Available

    1994-12-01

    This document is a monthly publication that provides current international oil data. The Report presents data on international oil production, demand, imports, exports, and stocks. Section 1 contains time series data on world oil production, and on oil demand and stocks in the OECD. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand and trade in OECD countries.

  2. INTERNAL REPAIR OF PIPELINES

    SciTech Connect (OSTI)

    Robin Gordon; Bill Bruce; Nancy Porter; Mike Sullivan; Chris Neary

    2003-05-01

    The two broad categories of deposited weld metal repair and fiber-reinforced composite repair technologies were reviewed for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Preliminary test programs were developed for both deposited weld metal repairs and for fiber-reinforced composite repair. To date, all of the experimental work pertaining to the evaluation of potential repair methods has focused on fiber-reinforced composite repairs. Hydrostatic testing was also conducted on four pipeline sections with simulated corrosion damage: two with composite liners and two without.

  3. A continuous cold atomic beam interferometer

    SciTech Connect (OSTI)

    Xue, Hongbo; Feng, Yanying Yan, Xueshu; Jiang, Zhikun; Chen, Shu; Wang, Xiaojia; Zhou, Zhaoying

    2015-03-07

    We demonstrate an atom interferometer that uses a laser-cooled continuous beam of {sup 87}Rb atoms having velocities of 10–20 m/s. With spatially separated Raman beams to coherently manipulate the atomic wave packets, Mach–Zehnder interference fringes are observed at an interference distance of 2L = 19 mm. The apparatus operates within a small enclosed area of 0.07 mm{sup 2} at a bandwidth of 190 Hz with a deduced sensitivity of 7.8×10{sup −5} rad/s/√(Hz) for rotations. Using a low-velocity continuous atomic source in an atom interferometer enables high sampling rates and bandwidths without sacrificing sensitivity and compactness, which are important for applications in real dynamic environments.

  4. High data rate atom interferometric device

    SciTech Connect (OSTI)

    Biedermann, Grant; McGuinness, Hayden James Evans; Rakholia, Akash

    2015-07-21

    A light-pulse atomic interferometry (LPAI) apparatus is provided. The LPAI apparatus comprises a vessel, two sets of magnetic coils configured to magnetically confine an atomic vapor in two respective magneto-optical traps (MOTs) within the vessel when activated, and an optical system configured to irradiate the atomic vapor within the vessel with laser radiation that, when suitably tuned, can launch atoms previously confined in each of the MOTs toward the other MOT. In embodiments, the magnetic coils are configured to produce a magnetic field that is non-zero at the midpoint between the traps. In embodiments, the time-of-flight of the launched atoms from one MOT to the other is 12 ms or less. In embodiments, the MOTs are situated approximately 36 mm apart. In embodiments, the apparatus is configured to activate the magnetic coils according to a particular temporal magnetic field gradient profile.

  5. Microsoft Word - DOE-ID-13-001 General Atomics EC B3-6.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 SECTION A. Project Title: Development of ASTM Standard for SiC-SiC Joint Testing - General Atomics SECTION B. Project Description General Atomics (GA) proposes to develop an instrumented test rig and standard test method to measure the strength of joints between cylindrical SiC-SiC tubing and endplugs at elevated, reactor-relevant temperatures. The test will be an endplug pushout method in which an axial load is applied to the internal surface of the endplug while the outer tubular ceramic

  6. International energy indicators. [International and US statistics

    SciTech Connect (OSTI)

    Bauer, E.K.

    1980-03-01

    For the international sector, a table of data is first presented followed by corresponding graph of the data for the following: (1) Iran: crude oil capacity, production, and shut-in, 1974 to February 1980; (2) Saudi Arabia (same as Iran); (3) OPEC (ex-Iran and Saudi Arabia); capacity, production, and shut-in, 1974 to January 1980; (4) non-OPEC Free World and US production of crude oil, 1973 to January 1980; (5) oil stocks: Free World, US, Japan, and Europe (landed), 1973 to 1979; (6) petroleum consumption by industrial countries, 1973 to October 1979; (7) USSR crude oil production, 1974 to February 1980; (8) Free World and US nuclear generation capacity, 1973 to January 1980. For the United States, the same data format is used for the following: (a) US imports of crude oil and products 1973 to January 1980; (b) landed cost of Saudi Arabia crude oil in current and 1974 dollars, 1974 to October 1979; (c) US trade in coal, 1973 to 1979; (d) summary of US merchandise trade, 1976 to January 1980; and (e) US energy/GNP ratio (in 1972 dollars), 1947 to 1979.

  7. Requirements for Xenon International

    SciTech Connect (OSTI)

    Hayes, James C.; Ely, James H.; Haas, Derek A.; Harper, Warren W.; Heimbigner, Tom R.; Hubbard, Charles W.; Humble, Paul H.; Madison, Jill C.; Morris, Scott J.; Panisko, Mark E.; Ripplinger, Mike D.; Stewart, Timothy L.

    2015-12-30

    This document defines the requirements for the new Xenon International radioxenon system. The output of this project will be a Pacific Northwest National Laboratory (PNNL) developed prototype and a manufacturer-developed production prototype. The two prototypes are intended to be as close to matching as possible; this will be facilitated by overlapping development cycles and open communication between PNNL and the manufacturer.

  8. Internal Control Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-10-28

    To ensure sound internal controls and overall consistency in exercising the statutory authorities that vest in the Secretary, the Administrator, National Nuclear Security Administration (NNSA), and Department's Chief Financial Officer (CFO), and to implement the Federal Managers' Financial Integrity Act of 1982 and related central agency guidance. Supersedes DOE O 413.1A.

  9. International petroleum statistics report

    SciTech Connect (OSTI)

    1997-05-01

    The International Petroleum Statistics Report is a monthly publication that provides current international oil data. This report is published for the use of Members of Congress, Federal agencies, State agencies, industry, and the general public. Publication of this report is in keeping with responsibilities given the Energy Information Administration in Public Law 95-91. The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995.

  10. Rotary internal combustion engine

    SciTech Connect (OSTI)

    Le, L.K.

    1990-11-20

    This patent describes an internal combustion engine comprising; a rotary compressor mechanism; a rotary expander mechanism; and combustion chamber means disposed between the compressor mechanism and the expander mechanism, whereby compressed air is delivered to the combustion chamber through the compressor discharge port, and pressurized gas is delivered from the combustion chamber into the expander mechanism through the pressurized gas intake port.

  11. Requirements for Xenon International

    SciTech Connect (OSTI)

    Hayes, James C.; Ely, James H.

    2013-09-26

    This document defines the requirements for the new Xenon International radioxenon system. The output of this project will be a Pacific Northwest National Laboratory (PNNL) developed prototype and a manufacturer-developed production prototype. The two prototypes are intended to be as close to matching as possible; this will be facilitated by overlapping development cycles and open communication between PNNL and the manufacturer.

  12. Internal split field generator

    DOE Patents [OSTI]

    Thundat; Thomas George; Van Neste, Charles W.; Vass, Arpad Alexander

    2012-01-03

    A generator includes a coil of conductive material. A stationary magnetic field source applies a stationary magnetic field to the coil. An internal magnetic field source is disposed within a cavity of the coil to apply a moving magnetic field to the coil. The stationary magnetic field interacts with the moving magnetic field to generate an electrical energy in the coil.

  13. International energy outlook 1996

    SciTech Connect (OSTI)

    1996-05-01

    This International Energy Outlook presents historical data from 1970 to 1993 and EIA`s projections of energy consumption and carbon emissions through 2015 for 6 country groups. Prospects for individual fuels are discussed. Summary tables of the IEO96 world energy consumption, oil production, and carbon emissions projections are provided in Appendix A. The reference case projections of total foreign energy consumption and of natural gas, coal, and renewable energy were prepared using EIA`s World Energy Projection System (WEPS) model. Reference case projections of foreign oil production and consumption were prepared using the International Energy Module of the National Energy Modeling System (NEMS). Nuclear consumption projections were derived from the International Nuclear Model, PC Version (PC-INM). Alternatively, nuclear capacity projections were developed using two methods: the lower reference case projections were based on analysts` knowledge of the nuclear programs in different countries; the upper reference case was generated by the World Integrated Nuclear Evaluation System (WINES)--a demand-driven model. In addition, the NEMS Coal Export Submodule (CES) was used to derive flows in international coal trade. As noted above, foreign projections of electricity demand are now projected as part of the WEPS. 64 figs., 62 tabs.

  14. NREL: International Activities Home Page

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sponsors and Partners NREL conducts its international programs in support of many U.S. agencies-including the Department of Energy, Agency for International Development, Department of State, Environmental Protection Agency, Millennium Challenge Corporation, Overseas Private Development Investment Corporation, as well as numerous international sponsors and partners, including the United Nations (UN) agencies, the Australian government, Global Green Growth Institute, International Renewable

  15. STEP Intern Reference Check Sheet

    Broader source: Energy.gov [DOE]

    STEP Intern Reference Check Sheet, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  16. The Manhattan Project: Making the atomic bomb

    SciTech Connect (OSTI)

    Gosling, F.G.

    1994-09-01

    This article is a short history of the origins and development of the American atomic bomb program during World War II. Beginning with the scientific developments of the pre-war years, the monograph details the role of US government in conducting a secret, nationwide enterprise that took science from the laboratory and into combat with an entirely new type of weapon. The monograph concludes with a discussion of the immediate postwar period, the debate over the Atomic Energy Act of 1946, and the founding of the Atomic Energy Commission.

  17. 1982 bibliography of atomic and molecular processes

    SciTech Connect (OSTI)

    Barnett, C.F.; Crandall, D.H.; Gilbody, H.B.; Gregory, D.C.; Kirkpatrick, M.I.; McDaniel, E.W.; McKnight, R.H.; Meyer, F.W.; Morgan, T.J.; Phaneuf, R.A.

    1984-05-01

    This annotated bibliography includes papers on atomic and molecular processes published during 1982. Sources include scientific journals, conference proceedings, and books. Each entry is designated by one or more of the 114 categories of atomic and molecular processes used by the Controlled Fusion Atomic Data Center, Oak Ridge National Laboratory to classify data. Also indicated is whether the work was experimental or theoretical, what energy range was covered, what reactants were investigated, and the country of origin of the first author. Following the bibliographical listing, the entries are indexed according to the categories and according to reactants within each subcategory.

  18. Internal core tightener

    DOE Patents [OSTI]

    Brynsvold, Glen V.; Snyder, Jr., Harold J.

    1976-06-22

    An internal core tightener which is a linear actuated (vertical actuation motion) expanding device utilizing a minimum of moving parts to perform the lateral tightening function. The key features are: (1) large contact areas to transmit loads during reactor operation; (2) actuation cam surfaces loaded only during clamping and unclamping operation; (3) separation of the parts and internal operation involved in the holding function from those involved in the actuation function; and (4) preloaded pads with compliant travel at each face of the hexagonal assembly at the two clamping planes to accommodate thermal expansion and irradiation induced swelling. The latter feature enables use of a "fixed" outer core boundary, and thus eliminates the uncertainty in gross core dimensions, and potential for rapid core reactivity changes as a result of core dimensional change.

  19. Rotary internal combustion engine

    SciTech Connect (OSTI)

    Murray, J.L.; Mosca, J.O.

    1992-02-25

    This patent describes a rotary internal combustion engine. It includes a housing; a cam track internally disposed within the housing and adapted to receive a cam follower; an engine block disposed within the housing, the engine block being relatively rotatable within the housing about a central axis; means connectable to an external drive member for translating the relative rotation of the engine block with respect to the housing into useful work; at least one radially arranged cylinder assembly on the block, each cylinder assembly including a cylinder having a longitudinal axis extending generally radially outwardly from the rotational axis of the block, the cylinder including means defining an end wall, a piston member disposed within the cylinder and adapted to reciprocate within the cylinder; the piston, cylinder and cylinder end wall together.

  20. Internal combustion rotary engine

    SciTech Connect (OSTI)

    Chen, S.P.

    1993-08-24

    An internal combustion rotary engine is described comprising: an internal combustion chamber wherein a combustible fuel-air mixture is ignited for producing a driving gas flow; a central rotor having an outer surface in which at least one group of curved channels circumferentially-and-axially extending without radially extending through the central rotor; and at least one annular rotor each enclosing the central rotor having an inner surface in which a corresponding number of curved channels circumferentially-and-axially extending without radially extending through the annular rotor; when the curved channels in the central rotor communicate with the curved channels in the annular rotor, the driving gas flow circumferentially-and-axially passing between the outer surface of the central rotor and the inner surface of the annular rotor for rotating the central rotor and the annular rotor in opposite directions.

  1. International Energy Agency

    SciTech Connect (OSTI)

    Claudy, D.E.

    1982-01-01

    The International Energy Agency (IEA) responded to the 1973-1974 oil embargo with an emergency allocation program outlined in the Agreement on an International Energy Program (IEP), viewed by the US as an executive agreement and by most participants as a treaty. The IEA's four standing groups on Relations with Producer and other Consumer Countries, on Long-Term Cooperation, on the Oil Market, and on Emergency Questions are organized to accommodate co041869flicting interests through voting rights and to allow constructive interaction among intergovernmental bodies. A description of the allocation system and industry's role in emergencies is followed by a summary of US legal requirements relating to these activities. Four appendices reproduce the IEP Agreement and diagram the IEA organizational structure, the IEA emergency allocation system, and the Emergency Management Organization. (DCK)

  2. International Nuclear Security

    SciTech Connect (OSTI)

    Doyle, James E.

    2012-08-14

    This presentation discusses: (1) Definitions of international nuclear security; (2) What degree of security do we have now; (3) Limitations of a nuclear security strategy focused on national lock-downs of fissile materials and weapons; (4) What do current trends say about the future; and (5) How can nuclear security be strengthened? Nuclear security can be strengthened by: (1) More accurate baseline inventories; (2) Better physical protection, control and accounting; (3) Effective personnel reliability programs; (4) Minimize weapons-usable materials and consolidate to fewer locations; (5) Consider local threat environment when siting facilities; (6) Implement pledges made in the NSS process; and (7) More robust interdiction, emergency response and special operations capabilities. International cooperation is desirable, but not always possible.

  3. International petroleum statistics report

    SciTech Connect (OSTI)

    Not Available

    1994-06-01

    This report presents data on international oil production, demand, imports, exports, and stocks. Section 1 contains time series data on world oil production, and on oil demand and stocks in the OECD. Section 2 presents an oil supply/demand balance for the world, presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production, oil stocks, demand, and trade in OECD countries.

  4. International petroleum statistics report

    SciTech Connect (OSTI)

    1997-11-01

    This document is a monthly publication which provides current data on international oil production,demand,imports and stocks. This report has four sections which contain time series data on world oil production and oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). Also included is oil supply/demand balance information for the world, and data on oil imports and trade by OECD countries.

  5. International petroleum statistics report

    SciTech Connect (OSTI)

    Not Available

    1995-01-01

    This monthly publication provides current data on international oil production, demand, imports, exports, and stocks. Section 1 contains time series data on world oil production, and on oil demand and stocks in the OECD. Section 2 presents an oil supply/demand balance for the world. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

  6. NREL: International Activities - Webmaster

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Webmaster Please enter your name and email address in the boxes provided, then type your message below. When you are finished, click "Send Message." NOTE: If you enter your e-mail address incorrectly, we will be unable to reply. Your name: Your email address: Your message: Send Message Printable Version International Activities Home Bilateral Partnerships Multilateral Partnerships Assessments & Tools Working with Us Did you find what you needed? Yes 1 No 0 Thank you for your

  7. International energy outlook 2006

    SciTech Connect (OSTI)

    2006-06-15

    This report presents international energy projections through 2030, prepared by the Energy Information Administration. After a chapter entitled 'Highlights', the report begins with a review of world energy and economic outlook, followed by energy consumption by end-use sector. The next chapter is on world oil markets. Natural gas, world coal market and electricity consumption and supply are then discussed. The final chapter covers energy-related carbon dioxide emissions.

  8. International Algae Symposium

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy’s Bioenergy Technologies Office Advanced Algal Systems Technology Manager Daniel Fishman represented the Office at the International Algae Symposium in Tokyo, Japan. Hosted at the University of Tsukuba’s newly established Algae Biomass Bioenergy Development Research Center, the symposium was an opportunity for algae researchers, policy makers, and industry leaders across the globe to learn about each other’s work.

  9. International markets for CCTs

    SciTech Connect (OSTI)

    Ferriter, J.P.

    1997-12-31

    The paper begins by describing the role of the International Energy Agency, the importance of coal, what the IEA is doing in the area of clean coal technology, and the role of the IEA Coal Industry Advisory Board. The paper then discusses which coal technologies will be chosen, what the problem areas are, and what can be done to accelerate the take-up of clean coal technologies.

  10. Internal Program Review

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    American Synchrophasor Initiative (NASPI) and Advanced Applications Research & Development (AARD) Internal Program Review 27-28 June 2013 Washington, DC Joe Eto Lawrence Berkeley National Lab DOE/OE Transmission Reliability Program 2 Management Review Topics  Project objective  Major technical accomplishments that will be completed this year  Deliverables and schedule for activities to be completed under FY13 funding  Risk factors affecting timely completion of planned activities

  11. International Subcommittee Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dr. Regis A. Matzie, Chair NEAC Meeting December 10, 2014 1 Externalities of Nuclear Power Important International Considerations  Safety - because of the potential impact that severe accidents can have globally  Energy security - particularly in countries with little domestic energy resources  Reduction of green house gases - impact on global warming, severe weather, and flooding of coastal areas  Proliferation - particularly as it relates to the construction of sensitive nuclear

  12. International petroleum statistics report

    SciTech Connect (OSTI)

    1997-07-01

    The International Petroleum Statistics Report is a monthly publication that provides current international data. The report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent 12 months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1996; OECD stocks from 1973 through 1996; and OECD trade from 1986 through 1996.

  13. The Russian Federation's Ministry of Atomic Energy: Programs and Developments

    SciTech Connect (OSTI)

    Johnson, Craig M.

    2000-07-24

    The Ministry of Atomic Energy of the Russian Federation (Minatom) is one of Russia's largest and most influential federal bodies. Throughout 1999 its head, Yevgeny Adamov, has worked to increase the Ministry's commercial competitiveness by consolidating redundant facilities and tightening control over subsidiary organizations. Economic difficulties and budget constraints, however, have hindered Minatom's ability to achieve many of its programs and goals. As a result, the Ministry has continued, renewed or initiated contracts with several countries possessing questionable commitments to nonproliferation and has sought to expand its role in international nuclear waste management and spent fuel reprocessing in order to raise new sources of revenue. While many of these programs are not likely to come to fruition, others raise significant nonproliferation and environmental concerns. This paper reviews select programs driving Minatom's efforts to raise funds, comments on their potential viability, and highlights areas likely to be of particular concern for the United States over the next three to five years.

  14. SECTION IV: ATOMIC AND MOLECULAR SCIENCE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IV: ATOMIC AND MOLECULAR SCIENCE A Pyroelectric Crystal Particle Accelerator ....................................................................................................................................................IV-1 J. Kalodimos and R.L. Watson Polarization of Ka Satellite Transitions in Potassium .....................................................................................................................................IV-4 K. S. Fruchey, R.L. Watson, V. Horvat, and Yong

  15. Network Optimization Models (RNAS and ATOM) | NISAC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    been used to study policy options concerning the movement of toxic chemicals by rail. Air Transport Optimization Model (ATOM) The TOM is a network-optimization model designed to...

  16. SECTION IV: ATOMIC, MOLECULAR AND MATERIALS SCIENCE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ATOMIC, MOLECULAR AND MATERIALS SCIENCE A semiempirical scaling law for target K x-ray production in heavy ion collisions...... IV-1 R. L. Watson, Y. Peng, V. Horvat, and A. ...

  17. Atomic-Layer-Deposited Transparent Electrodes for Silicon Heterojunction Solar Cells

    SciTech Connect (OSTI)

    Demaurex, Benedicte; Seif, Johannes P.; Smit, Sjoerd; Macco, Bart; Kessels, W. M.; Geissbuhler, Jonas; De Wolf, Stefaan; Ballif, Christophe

    2014-11-01

    We examine damage-free transparent-electrode deposition to fabricate high-efficiency amorphous silicon/crystalline silicon heterojunction solar cells. Such solar cells usually feature sputtered transparent electrodes, the deposition of which may damage the layers underneath. Using atomic layer deposition, we insert thin protective films between the amorphous silicon layers and sputtered contacts and investigate their effect on device operation. We find that a 20-nm-thick protective layer suffices to preserve, unchanged, the amorphous silicon layers beneath. Insertion of such protective atomic-layer-deposited layers yields slightly higher internal voltages at low carrier injection levels. However, we identify the presence of a silicon oxide layer, formed during processing, between the amorphous silicon and the atomic-layer-deposited transparent electrode that acts as a barrier, impeding hole and electron collection.

  18. Atomic-Layer-Deposited Transparent Electrodes for Silicon Heterojunction Solar Cells

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Demaurex, Benedicte; Seif, Johannes P.; Smit, Sjoerd; Macco, Bart; Kessels, W. M.; Geissbuhler, Jonas; De Wolf, Stefaan; Ballif, Christophe

    2014-11-01

    We examine damage-free transparent-electrode deposition to fabricate high-efficiency amorphous silicon/crystalline silicon heterojunction solar cells. Such solar cells usually feature sputtered transparent electrodes, the deposition of which may damage the layers underneath. Using atomic layer deposition, we insert thin protective films between the amorphous silicon layers and sputtered contacts and investigate their effect on device operation. We find that a 20-nm-thick protective layer suffices to preserve, unchanged, the amorphous silicon layers beneath. Insertion of such protective atomic-layer-deposited layers yields slightly higher internal voltages at low carrier injection levels. However, we identify the presence of a silicon oxide layer, formed during processing,more » between the amorphous silicon and the atomic-layer-deposited transparent electrode that acts as a barrier, impeding hole and electron collection.« less

  19. New analogies between extreme QCD and cold atoms

    SciTech Connect (OSTI)

    Nishida, Yusuke

    2012-08-15

    We discuss two new analogies between extreme QCD and cold atoms. One is the analogue of 'hard probes' in cold atoms. The other is the analogue of 'quark-hadron continuity' in cold atoms.

  20. August 1, 1946: Atomic Energy Act | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    August 1, 1946: Atomic Energy Act August 1, 1946 President Truman signs the Atomic Energy Act of 1946. On January 1, 1947, all atomic energy activities are transferred to the newly ...

  1. Atomic resolution images of graphite in air

    SciTech Connect (OSTI)

    Grigg, D.A.; Shedd, G.M.; Griffis, D.; Russell, P.E.

    1988-12-01

    One sample used for proof of operation for atomic resolution in STM is highly oriented pyrolytic graphite (HOPG). This sample has been imaged with many different STM`s obtaining similar results. Atomic resolution images of HOPG have now been obtained using an STM designed and built at the Precision Engineering Center. This paper discusses the theoretical predictions and experimental results obtained in imaging of HOPG.

  2. CERTIFICATION DOCKET WESTINGHOUSE ATOMIC POWER DEVELOPMENT PLANT

    Office of Legacy Management (LM)

    WESTINGHOUSE ATOMIC POWER DEVELOPMENT PLANT EAST PITTSBURGH PLANT FOREST HILLS PITTSBURGH, PENNSYLVANIA Department of Energy Office of Nuclear Energy Office of Terminal Waste Disposal and Remedial Action Division of Remedial Action Projects ..-.. --__- _".-.-l--_--l -_._ _- --- ~~~. . ..~ CONTENTS Page - - I NTRODUCTI ON 1 Purpose 1 Docket Contents 1 Exhibit I: Summary of Activities at Westinghouse Atomic Power Development Plant, East Pittsburgh Plant, Forest Hills, Pittsburgh, Pennsylvania

  3. Physics of Electronic and Atomic Collisions: XXI International Conference, AIP Conference Proceedings, No. 500 [APCPCS

    SciTech Connect (OSTI)

    Itikawa, Y.; Okuno, K.; Tanaka, H.; Yagishita, A.; Matsuzawa, M.

    2000-12-31

    Topics covered in this conference included collisions involving photons, collisions involving electrons and positrons, and collisions involving heavy projectiles.

  4. Scanning magnetoresistance microscopy of atom chips

    SciTech Connect (OSTI)

    Volk, M.; Whitlock, S.; Wolff, C. H.; Hall, B. V.; Sidorov, A. I.

    2008-02-15

    Surface based geometries of microfabricated wires or patterned magnetic films can be used to magnetically trap and manipulate ultracold neutral atoms or Bose-Einstein condensates. We investigate the magnetic properties of such atom chips using a scanning magnetoresistive (MR) microscope with high spatial resolution and high field sensitivity. By comparing MR scans of a permanent magnetic atom chip to field profiles obtained using ultracold atoms, we show that MR sensors are ideally suited to observe small variations of the magnetic field caused by imperfections in the wires or magnetic materials which ultimately lead to fragmentation of ultracold atom clouds. Measurements are also provided for the magnetic field produced by a thin current-carrying wire with small geometric modulations along the edge. Comparisons of our measurements with a full numeric calculation of the current flow in the wire and the subsequent magnetic field show excellent agreement. Our results highlight the use of scanning MR microscopy as a convenient and powerful technique for precisely characterizing the magnetic fields produced near the surface of atom chips.

  5. Plasma Sprayed Pour Tubes and Other Melt Handling Components for Use in Gas Atomization

    SciTech Connect (OSTI)

    Byrd, David; Rieken, Joel; Heidloff, Andy; Besser, Matthew; Anderson, Iver

    2011-04-01

    Ames Laboratory has successfully used plasma sprayed ceramic components made from yttria stabilized zirconia as melt pouring tubes for gas atomization for many years. These tubes have proven to be strong, thermal shock resistant and versatile. Various configurations are possible both internally and externally. Accurate dimensions are achieved internally with a machined fugitive graphite mandrel and externally by diamond grinding. The previous study of the effect of spray parameters on density was extended to determine the effect of the resulting density on the thermal shock characteristics on down-quenching and up-quenching. Encouraging results also prompted investigation of the use of plasma spraying as a method to construct a melt pour exit stopper that is mechanically robust, thermal shock resistant, and not susceptible to attack by reactive melt additions. The Ames Laboratory operates two close-coupled high pressure gas atomizers. These two atomizers are designed to produce fine and coarse spherical metal powders (5{mu} to 500{mu} diameter) of many different metals and alloys. The systems vary in size, but generally the smaller atomizer can produce up to 5 kg of powder whereas the larger can produce up to 25 kg depending on the charge form and density. In order to make powders of such varying compositions, it is necessary to have melt systems capable of heating and containing the liquid charge to the desired superheat temperature prior to pouring through the atomization nozzle. For some metals and alloys this is not a problem; however for some more reactive and/or high melting materials this can pose unique challenges. Figure 1 is a schematic that illustrates the atomization system and its components.

  6. The Common Elements of Atomic and Hadronic Physics (Conference...

    Office of Scientific and Technical Information (OSTI)

    The Common Elements of Atomic and Hadronic Physics Citation Details In-Document Search Title: The Common Elements of Atomic and Hadronic Physics Authors: Brodsky, Stanley J. ;...

  7. Order, disorder and mixing: The atomic structure of amorphous...

    Office of Scientific and Technical Information (OSTI)

    Order, disorder and mixing: The atomic structure of amorphous mixtures of titania and tantala Citation Details In-Document Search Title: Order, disorder and mixing: The atomic ...

  8. The perfect atom sandwich requires an extra layer > Archived...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Titanium atoms (yellow) preferentially bond with oxygen atoms (gray) and sit at the center of a complete octahedron, making it energetically more favorable for titanium to switch ...

  9. Institute for Atom-Efficient Chemical Transformations Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Institute for Atom-Efficient Chemical Transformations - an Energy Frontier Research Center The Institute for Atom-Efficient Chemical Transformations (IACT) employs a...

  10. Institute for Atom-Efficient Chemical Transformations Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    scientific roadblocks to U.S. energy security. Institute for Atom-Efficient Chemical Transformations The Institute for Atom-Efficient Chemical Transformations (IACT)...

  11. Atomic line emission analyzer for hydrogen isotopes (Patent)...

    Office of Scientific and Technical Information (OSTI)

    Atomic line emission analyzer for hydrogen isotopes Title: Atomic line emission analyzer for hydrogen isotopes Apparatus for isotopic analysis of hydrogen comprises a low pressure ...

  12. Spatial atomic layer deposition on flexible substrates using...

    Office of Scientific and Technical Information (OSTI)

    Spatial atomic layer deposition on flexible substrates using a modular rotating cylinder reactor Citation Details In-Document Search Title: Spatial atomic layer deposition on...

  13. Charge flow model for atomic ordering in nonisovalent alloys...

    Office of Scientific and Technical Information (OSTI)

    Charge flow model for atomic ordering in nonisovalent alloys Title: Charge flow model for atomic ordering in nonisovalent alloys Authors: Wang, Shuzhi ; Wang, Lin-Wang Publication ...

  14. Hewlett and Duncan - Atomic Shield | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Duncan - Atomic Shield Hewlett and Duncan - Atomic Shield Hewlett, Richard G. and Francis Duncan. Atomic Shield, 1947-1952. U.S. Atomic Energy Comission, 1972. The second volume of the three volume A History of the United States Atomic Energy Commission. Text in each PDF is fully searchable. "Hewlett and Duncan - Atomic Shield (complete).pdf" contains the complete text and images from Atomic Shield. 12mb "Hewlett and Duncan - Atomic Shield (figures only).pdf" contains hi-res

  15. Los Alamos Selected as Atomic Weapons Laboratory | National Nuclear...

    National Nuclear Security Administration (NNSA)

    Los Alamos Selected as Atomic Weapons Laboratory Los Alamos, NM Groves selects Los Alamos, New Mexico, as site for separate scientific laboratory to design an atomic bomb

  16. Signals from dark atom formation in halos (Journal Article) ...

    Office of Scientific and Technical Information (OSTI)

    Signals from dark atom formation in halos Prev Next Title: Signals from dark atom formation in halos Authors: Pearce, Lauren ; Petraki, Kalliopi ; Kusenko, Alexander ...

  17. The Simplicity of Perfect Atoms: Degeneracies in Supersymmetric...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: The Simplicity of Perfect Atoms: Degeneracies in Supersymmetric Hydrogen Citation Details In-Document Search Title: The Simplicity of Perfect Atoms: Degeneracies...

  18. The Simplicity of Perfect Atoms: Degeneracies in Supersymmetric...

    Office of Scientific and Technical Information (OSTI)

    The Simplicity of Perfect Atoms: Degeneracies in Supersymmetric Hydrogen Citation Details In-Document Search Title: The Simplicity of Perfect Atoms: Degeneracies in Supersymmetric...

  19. Ultra-sensitive Magnetic Microscopy with an Atomic Magnetometer...

    Office of Scientific and Technical Information (OSTI)

    Country of Publication: United States Language: English Subject: 74 ATOMIC AND ... PERFORMANCE TESTING; SENSITIVITY; DATA ACQUISITION SYSTEMS; ALKALI METALS; ATOMS Word ...

  20. Clifford G. Shull, Neutron Diffraction, Hydrogen Atoms, and Neutron...

    Office of Scientific and Technical Information (OSTI)

    In Professor Shull's opinion the most important problem he worked on at the time dealt with determining the positions of hydrogen atoms in materials. "Hydrogen atoms are ubiquitous ...

  1. Atomic Layer Deposition of Metal Sulfide Materials | Argonne...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Atomic Layer Deposition of Metal Sulfide Materials Title Atomic Layer Deposition of Metal Sulfide Materials Publication Type Journal Article Year of Publication 2015 Authors...

  2. Atom probe tomographic mapping directly reveals the atomic distribution of phosphorus in resin embedded ferritin

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Perea, Daniel E.; Liu, Jia; Bartrand, Jonah A. G.; Dicken, Quinten G.; Thevuthasan, Suntharampillai Theva; Browning, Nigel D.; Evans, James E.

    2016-02-29

    In this study, we report the atomic-scale analysis of biological interfaces using atom probe tomography. Embedding the protein ferritin in an organic polymer resin lacking nitrogen provided chemical contrast to visualize atomic distributions and distinguish organic-organic and organic-inorganic interfaces. The sample preparation method can be directly extended to further enhance the study of biological, organic and inorganic nanomaterials relevant to health, energy or the environment.

  3. Atoms for peace and war, 1953-1961: Eisenhower and the Atomic Energy Commission

    SciTech Connect (OSTI)

    Hewlett, Richard G.; Holl, Jack M.

    1989-12-01

    This third volume in the official history of the U.S. Atomic Energy Commission covers the years of the Eisenhower Administration.

  4. INTERNAL REPAIR OF PIPELINES

    SciTech Connect (OSTI)

    Robin Gordon; Bill Bruce; Ian Harris; Dennis Harwig; Nancy Porter; Mike Sullivan; Chris Neary

    2004-04-12

    The two broad categories of deposited weld metal repair and fiber-reinforced composite liner repair technologies were reviewed for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Preliminary test programs were developed for both deposited weld metal repair and for fiber-reinforced composite liner repair. Evaluation trials have been conducted using a modified fiber-reinforced composite liner provided by RolaTube and pipe sections without liners. All pipe section specimens failed in areas of simulated damage. Pipe sections containing fiber-reinforced composite liners failed at pressures marginally greater than the pipe sections without liners. The next step is to evaluate a liner material with a modulus of elasticity approximately 95% of the modulus of elasticity for steel. Preliminary welding parameters were developed for deposited weld metal repair in preparation of the receipt of Pacific Gas & Electric's internal pipeline welding repair system (that was designed specifically for 559 mm (22 in.) diameter pipe) and the receipt of 559 mm (22 in.) pipe sections from Panhandle Eastern. The next steps are to transfer welding parameters to the PG&E system and to pressure test repaired pipe sections to failure. A survey of pipeline operators was conducted to better understand the needs and performance requirements of the natural gas transmission industry regarding internal repair. Completed surveys contained the following principal conclusions: (1) Use of internal weld repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway crossings. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling (HDD) when a new bore must be created to

  5. U.S. Energy Secretary Moniz and Chinese Atomic Energy Authority Open New Nuclear Security Training Facility

    Broader source: Energy.gov [DOE]

    U.S. Secretary of Energy Ernest Moniz, accompanied by senior officials from the Department of Energy’s National Nuclear Security Administration (DOE/NNSA), the Department of Defense, and a host of international VIPs, participated with the China Atomic Energy Authority (CAEA) to commission China’s new nuclear security Center of Excellence (COE).

  6. Internal absorber solar collector

    DOE Patents [OSTI]

    Sletten, Carlyle J.; Herskovitz, Sheldon B.; Holt, F. S.; Sletten, E. J.

    1981-01-01

    Thin solar collecting panels are described made from arrays of small rod collectors consisting of a refracting dielectric rod lens with an absorber imbedded within it and a reflecting mirror coated on the back side of the dielectric rod. Non-tracking collector panels on vertical walls or roof tops receive approximately 90% of solar radiation within an acceptance zone 60.degree. in elevation angle by 120.degree. or more in the azimuth sectors with a collector concentration ratio of approximately 3.0. Miniaturized construction of the circular dielectric rods with internal absorbers reduces the weight per area of glass, plastic and metal used in the collector panels. No external parts or insulation are needed as heat losses are low due to partial vacuum or low conductivity gas surrounding heated portions of the collector. The miniature internal absorbers are generally made of solid copper with black selective surface and the collected solar heat is extracted at the collector ends by thermal conductivity along the absorber rods. Heat is removed from end fittings by use of liquid circulants. Several alternate constructions are provided for simplifying collector panel fabrication and for preventing the thermal expansion and contraction of the heated absorber or circulant tubes from damaging vacuum seals. In a modified version of the internal absorber collector, oil with temperature dependent viscosity is pumped through a segmented absorber which is now composed of closely spaced insulated metal tubes. In this way the circulant is automatically diverted through heated portions of the absorber giving higher collector concentration ratios than theoretically possible for an unsegmented absorber.

  7. International energy annual 1995

    SciTech Connect (OSTI)

    1996-12-01

    The International Energy Annual presents information and trends on world energy production and consumption for petroleum, natural gas, coal, and electricity. Production and consumption data are reported in standard units as well as British thermal units (Btu). Trade and reserves are shown for petroleum, natural gas, and coal. Data are provided on crude oil refining capacity and electricity installed capacity by type. Prices are included for selected crude oils and for refined petroleum products in selected countries. Population and Gross Domestic Product data are also provided.

  8. International energy annual, 1993

    SciTech Connect (OSTI)

    1995-05-08

    This document presents an overview of key international energy trends for production, consumption, imports, and exports of primary energy commodities in over 200 countries, dependencies, and areas of special sovereignty. Also included are population and gross domestic product data, as well as prices for crude oil and petroleum products in selected countries. Renewable energy includes hydroelectric, geothermal, solar and wind electric power and alcohol for fuel. The data were largely derived from published sources and reports from US Embassy personnel in foreign posts. EIA also used data from reputable secondary sources, industry reports, etc.

  9. International petroleum statistics report

    SciTech Connect (OSTI)

    1998-01-01

    This monthly publication provides international oil data for January 1998. The report presents data on oil production, demand, imports, and stocks in four sections. Section 1 containes time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. section 3 presents data on oil imports by OECD countries. Section 4 containes annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

  10. International energy outlook 2005

    SciTech Connect (OSTI)

    2005-07-01

    This report presents international energy projections through 2025, prepared by the Energy Information Administration. The outlooks for major energy fuels are discussed, along with electricity, transportation, and environmental issues. After a chapter entitled 'Highlights', the report begins with a review of world energy and an economic outlook. The IEO2005 projections cover a 24 year period. The next chapter is on world oil markets. Natural gas and coal reserves and resources, consumption and trade discussed. The chapter on electricity deals with primary fuel use for electricity generation, and regional developments. The final section is entitled 'Energy-related greenhouse gas emissions'.

  11. International training course on nuclear materials accountability for safeguards purposes

    SciTech Connect (OSTI)

    Not Available

    1980-12-01

    The two volumes of this report incorporate all lectures and presentations at the International Training Course on Nuclear Materials Accountability and Control for Safeguards Purposes, held May 27-June 6, 1980, at the Bishop's Lodge near Santa Fe, New Mexico. The course, authorized by the US Nuclear Non-Proliferation Act and sponsored by the US Department of Energy in cooperation with the International Atomic Energy Agency, was developed to provide practical training in the design, implementation, and operation of a National system of nuclear materials accountability and control that satisfies both National and IAEA International safeguards objectives. Volume I, covering the first week of the course, presents the background, requirements, and general features of material accounting and control in modern safeguard systems. Volume II, covering the second week of the course, provides more detailed information on measurement methods and instruments, practical experience at power reactor and research reactor facilities, and examples of operating state systems of accountability and control.

  12. Foley elected ASM International Fellow

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Foley elected ASM International Fellow Foley elected ASM International Fellow James Foley is the 10th ASM Fellow from LANL. July 8, 2014 James Foley James Foley The Society...

  13. Scheuco International | Open Energy Information

    Open Energy Info (EERE)

    Name: Scheuco International Place: Bielefeld, Germany Zip: 33609 Sector: Solar Product: Building envelope specialist (facade construction), including solar products. References:...

  14. International Cooperation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Cooperation International Cooperation Members at a meeting of the international Carbon Sequestration Leadership Forum (CSLF). The Office of Fossil Energy is the Secretariat for the CSLF. Members at a meeting of the international Carbon Sequestration Leadership Forum (CSLF). The Office of Fossil Energy is the Secretariat for the CSLF. Key Bilateral Activities US-India Energy Dialogue: Coal Working Group The Office of Fossil Energy and India's Ministry of Coal jointly chair the Coal

  15. International Energy Program Evaluation Conference

    Broader source: Energy.gov [DOE]

    The International Energy Program Evaluation Conference (IEPEC) will be held in Long Beach, California, on Aug. 11-13, 2015.

  16. International Hydrogen Infrastructure Update Webinar

    Office of Energy Efficiency and Renewable Energy (EERE)

    Download the presentation slides from the Fuel Cell Technologies Office webinar "International Hydrogen Infrastructure Update" held on August 30, 2016.

  17. International energy outlook 1998

    SciTech Connect (OSTI)

    1998-04-01

    The International Energy Outlook 1998 (IEO98) presents an assessment by the Energy Information Administration (EIA) of the outlook for international energy markets through 2020. Projections in IEO98 are displaced according to six basic country groupings. The industrialized region includes projections for four individual countries -- the United States, Canada, Mexico, and Japan -- along with the subgroups Western Europe and Australasia (defined as Australia, New Zealand, and the US Territories). The developing countries are represented by four separate regional subgroups: developing Asia, Africa, Middle East, and Central and South America. China and India are represented in developing Asia. New to this year`s report, country-level projections are provided for Brazil -- which is represented in Central and South America. Eastern Europe and the former Soviet Union (EE/FSU) are considered as a separate country grouping. The report begins with a review of world trends in energy demand. Regional consumption projections for oil, natural gas, coal, nuclear power, and renewable energy (hydroelectricity, geothermal, wind, solar, and other renewables) are presented in five fuel chapters, with a review of the current status of each fuel on a worldwide basis. Summary tables of the IEO98 projections for world energy consumption, carbon emissions, oil production, and nuclear power generating capacity are provided in Appendix A. 88 figs., 77 tabs.

  18. Internal combustion engine

    SciTech Connect (OSTI)

    Perrin, G.; Bergmann, H.

    1984-06-12

    An externally auto-ignited four-stroke internal combustion engine which includes a combustion chamber disposed in an upper surface of a piston such that, in an upper dead-center position of the piston, the combustion chamber receives almost all of the fuel-air mixture. The combustion chamber includes a planar bottom portion and has a cross-sectional shape of a truncated cone expanding in a direction of the cylinder head. The internal combustion engine also includes a recess or depression provided in the cylinder head and disposed eccentrically with respect to a longitudinal center axis of the cylinder. The depression or recess in the cylinder head has the shape of a truncated cone expanding in a direction of the piston, with a spark plug projecting or penetrating into the recess or depression in the cylinder head. In order to enable the achievement of good combustion, increased overall engine performance, and the minimum amount of harmful components in the exhaust gases from the engine when different types of fuel are used, predetermined constructional parameters are selected with respect to the combustion chamber and recess or depression disposed above the combustion chamber as well as the disposition of the combustion chamber with respect to a longitudinal center axis of the cylinder.

  19. International petroleum statistics report

    SciTech Connect (OSTI)

    1996-10-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. Word oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995.

  20. International petroleum statistics report

    SciTech Connect (OSTI)

    1995-11-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

  1. 1991 international petroleum encyclopedia

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    There is no other petroleum industry publication quite like the International Petroleum Encyclopedia. With a timely, accurate combination of global industry coverage and analysis, detailed statistical surveys, cutting-edge reports on technological advancements and the ever-popular atlas maps, the 1991 International Petroleum Encyclopedia is a smart buy for professionals whose business is oil and gas, as well as for those whose business is affected by the industry's trends and developments. Written by a professional staff of Oil and Gas Journal petroleum experts, the 1991 IPE gives you the all important global perspective for constructing sound business strategies for the 90's. The petroleum industry is scrambling for information that will help it survive this volitile period. This book reports on the topics in the petroleum industry the latest developments in horizontal drilling, world refining (the latest information on reformulated fuels), and predictions about the post-war Persian Gulf industry. PULS, discussions on changes in the Gulf of Mexico, developments in the LNG trade, and crude oil tanker supply/.demand curves.

  2. International petroleum transactions

    SciTech Connect (OSTI)

    Smith, E.E.; Dzienkowski, J.S.; Anderson, O.L.; Conine, G.B.; Lowe, J.S.

    1993-12-31

    This book is intended primarily as a casebook for students. However, it should not be discarded on these grounds because if compiles important materials that are useful to practitioners as their energy practices become global. The opening chapter is broad in scope and discusses NAFTA, GATT, the EC, and provides comprehensive and current statistical information on world energy resources and the pivotal role of host countries. Legal issues are analyzed in Chapter 2 which provides an excellent discussion of sovereign immunity and the act of state doctrine. Also, this chapter includes model clauses which are helpful even to a seasoned practitioner. Given that security of investment is critical to an international transaction, the book concludes its opening section with a discussion of expropriation issues. Part II is entitled Exploration, development and Production and is divided into four chapters. Using both cases and source materials, a comprehensive survey of ownership of mineral rights and concessions is presented. From a practitioner`s standpoint, Chapters 5 and 6 are important because of the inclusion of model clauses and contracts for production sharing arrangements, licenses, participation agreements, service contracts, and technology transfers. Chapter 8 deals with joint development and operations. The book concludes with three chapters on the history of the markets and international transactions involving oil and natural gas.

  3. International petroleum statistics report

    SciTech Connect (OSTI)

    1995-07-27

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

  4. International petroleum statistics report

    SciTech Connect (OSTI)

    1996-05-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1084 through 1994.

  5. International energy indicators

    SciTech Connect (OSTI)

    Bauer, E.K.

    1981-02-01

    Extensive data are compiled for energy on the international scene and for the US. Data are indicated from the date given and into 1980 as far as available. Data are given for the international scene on: world crude oil production, 1975-to date; Iran: crude oil capacity, production, and shut-in, 1974-to date; Saudi Arabia: crude oil capacity, production, and shut-in, 1974-to date; OPEC (Ex-Iran and Saudi Arabia): capacity, production, and shut-in, 1974-to date; oil stocks: Free World, US, Japan, and Europe (landed), 1973-to date; petroleum consumption by industrial countries, 1973-to date; USSR crude oil production, 1974-to date; Free World and US nuclear generation capacity, 1973-to date. Data are supplied specifically for the US on US gross imports of crude oil and products, 1973-to date; landed cost of Saudi crude in current and 1974 dollars; US trade in bituminous coal, 1973-to date; summary of US merchandise trade, 1976-to date; and energy/GNP ratio.

  6. International Clean Energy Coalition

    SciTech Connect (OSTI)

    Erin Skootsky; Matt Gardner; Bevan Flansburgh

    2010-09-28

    In 2003, the National Association of Regulatory Utility Commissioners (NARUC) and National Energy Technology Laboratories (NETL) collaboratively established the International Clean Energy Coalition (ICEC). The coalition consisting of energy policy-makers, technologists, and financial institutions was designed to assist developing countries in forming and supporting local approaches to greenhouse gas mitigation within the energy sector. ICEC's work focused on capacity building and clean energy deployment in countries that rely heavily on fossil-based electric generation. Under ICEC, the coalition formed a steering committee consisting of NARUC members and held a series of meetings to develop and manage the workplan and define successful outcomes for the projects. ICEC identified India as a target country for their work and completed a country assessment that helped ICEC build a framework for discussion with Indian energy decisionmakers including two follow-on in-country workshops. As of the conclusion of the project in 2010, ICEC had also conducted outreach activities conducted during United Nations Framework Convention on Climate Change (UNFCCC) Ninth Conference of Parties (COP 9) and COP 10. The broad goal of this project was to develop a coalition of decision-makers, technologists, and financial institutions to assist developing countries in implementing affordable, effective and resource appropriate technology and policy strategies to mitigate greenhouse gas emissions. Project goals were met through international forums, a country assessment, and in-country workshops. This project focused on countries that rely heavily on fossil-based electric generation.

  7. Temperature measurement of cold atoms using single-atom transits and Monte Carlo simulation in a strongly coupled atom-cavity system

    SciTech Connect (OSTI)

    Li, Wenfang; Du, Jinjin; Wen, Ruijuan; Yang, Pengfei; Li, Gang; Zhang, Tiancai; Liang, Junjun

    2014-03-17

    We investigate the transmission of single-atom transits based on a strongly coupled cavity quantum electrodynamics system. By superposing the transit transmissions of a considerable number of atoms, we obtain the absorption spectra of the cavity induced by single atoms and obtain the temperature of the cold atom. The number of atoms passing through the microcavity for each release is also counted, and this number changes exponentially along with the atom temperature. Monte Carlo simulations agree closely with the experimental results, and the initial temperature of the cold atom is determined. Compared with the conventional time-of-flight (TOF) method, this approach avoids some uncertainties in the standard TOF and sheds new light on determining temperature of cold atoms by counting atoms individually in a confined space.

  8. INTERNAL REPAIR OF PIPELINES

    SciTech Connect (OSTI)

    Robin Gordon; Bill Bruce; Ian Harris; Dennis Harwig; George Ritter; Bill Mohr; Matt Boring; Nancy Porter; Mike Sullivan; Chris Neary

    2004-12-31

    The two broad categories of fiber-reinforced composite liner repair and deposited weld metal repair technologies were reviewed and evaluated for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Principal conclusions from a survey of natural gas transmission industry pipeline operators can be summarized in terms of the following performance requirements for internal repair: (1) Use of internal repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway crossings. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling when a new bore must be created to solve a leak or other problem. (3) Typical travel distances can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). All three groups require pig-based systems. A despooled umbilical system would suffice for the first two groups which represents 81% of survey respondents. The third group would require an onboard self-contained power unit for propulsion and welding/liner repair energy needs. (4) The most common size range for 80% to 90% of operators surveyed is 508 mm (20 in.) to 762 mm (30 in.), with 95% using 558.8 mm (22 in.) pipe. Evaluation trials were conducted on pipe sections with simulated corrosion damage repaired with glass fiber-reinforced composite liners, carbon fiber-reinforced composite liners, and weld deposition. Additional un-repaired pipe sections were evaluated in the virgin condition and with simulated damage. Hydrostatic failure pressures for pipe sections repaired with glass fiber-reinforced composite liner were only marginally greater than that of pipe sections without

  9. INTERNAL REPAIR OF PIPELINES

    SciTech Connect (OSTI)

    Robin Gordon; Bill Bruce; Ian Harris; Dennis Harwig; George Ritter; Bill Mohr; Matt Boring; Nancy Porter; Mike Sullivan; Chris Neary

    2004-08-17

    The two broad categories of fiber-reinforced composite liner repair and deposited weld metal repair technologies were reviewed and evaluated for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Principal conclusions from a survey of natural gas transmission industry pipeline operators can be summarized in terms of the following performance requirements for internal repair: (1) Use of internal repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling when a new bore must be created to solve a leak or other problem. (3) Typical travel distances can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). All three groups require pig-based systems. A despooled umbilical system would suffice for the first two groups which represents 81% of survey respondents. The third group would require an onboard self-contained power unit for propulsion and welding/liner repair energy needs. (4) The most common size range for 80% to 90% of operators surveyed is 508 mm (20 in.) to 762 mm (30 in.), with 95% using 558.8 mm (22 in.) pipe. Evaluation trials were conducted on pipe sections with simulated corrosion damage repaired with glass fiber-reinforced composite liners, carbon fiber-reinforced composite liners, and weld deposition. Additional un-repaired pipe sections were evaluated in the virgin condition and with simulated damage. Hydrostatic failure pressures for pipe sections repaired with glass fiber-reinforced composite liner were only marginally greater than that of pipe sections without liners

  10. INTERNAL REPAIR OF PIPELINES

    SciTech Connect (OSTI)

    Bill Bruce; Nancy Porter; George Ritter; Matt Boring; Mark Lozev; Ian Harris; Bill Mohr; Dennis Harwig; Robin Gordon; Chris Neary; Mike Sullivan

    2005-07-20

    The two broad categories of fiber-reinforced composite liner repair and deposited weld metal repair technologies were reviewed and evaluated for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Principal conclusions from a survey of natural gas transmission industry pipeline operators can be summarized in terms of the following performance requirements for internal repair: (1) Use of internal repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway crossings. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling when a new bore must be created to solve a leak or other problem. (3) Typical travel distances can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). All three groups require pig-based systems. A despooled umbilical system would suffice for the first two groups which represents 81% of survey respondents. The third group would require an onboard self-contained power unit for propulsion and welding/liner repair energy needs. (4) The most common size range for 80% to 90% of operators surveyed is 508 mm (20 in.) to 762 mm (30 in.), with 95% using 558.8 mm (22 in.) pipe. Evaluation trials were conducted on pipe sections with simulated corrosion damage repaired with glass fiber-reinforced composite liners, carbon fiber-reinforced composite liners, and weld deposition. Additional un-repaired pipe sections were evaluated in the virgin condition and with simulated damage. Hydrostatic failure pressures for pipe sections repaired with glass fiber-reinforced composite liner were only marginally greater than that of pipe sections without

  11. Apex Gold discussion fosters international cooperation in run-up to 2016

    National Nuclear Security Administration (NNSA)

    Nuclear Security Summit | National Nuclear Security Administration | (NNSA) Apex Gold discussion fosters international cooperation in run-up to 2016 Nuclear Security Summit Monday, February 1, 2016 - 1:16pm NNSA Blog Participants in Apex Gold at Lawrence Livermore National Laboratory. What would national leaders do in the face of a transnational nuclear terrorism threat? Last week, ministers and other senior delegates from 37 nations, along with representatives from the International Atomic

  12. International inspection activity impacts upon DOE safeguards requirements

    SciTech Connect (OSTI)

    Zack, N.R.; Crawford, D.W.

    1995-09-01

    The US has placed certain special nuclear materials declared excess to their strategic needs under international safeguards through the International Atomic Energy Agency (IAEA). This Presidential initiative has obligated materials at several Department of Energy (DOE) facilities for these safeguards activities to demonstrate the willingness of the US to ban production or use of nuclear materials outside of international safeguards. However, IAEA inspection activities generally tend to be intrusive in nature and are not consistent with several domestic safeguards procedures implemented to reduce worker radiation exposures and increase the cost-effectiveness and efficiency of accounting for and storing of special nuclear materials. To help identify and provide workable solutions to these concerns, the Office of Safeguards and Security has conducted a program to determine possible changes to the DOE safeguards and security requirements designed to help facilities under international safeguards inspections more easily comply with domestic safeguards goals during international inspection activities. This paper will discuss the impact of international inspection activities on facility safeguards operations and departmental safeguards procedures and policies.

  13. Development of Low Cost Gas Atomization of Precursor Powders for Simplified ODS Alloy Production

    SciTech Connect (OSTI)

    Anderson, Iver

    2014-08-05

    A novel gas atomization reaction synthesis (GARS) method was developed in this project to enable production (at our partner’s facility) a precursor Ni-Cr-Y-Ti powder with a surface oxide and an internal rare earth (RE) containing intermetallic compound (IMC) phase. Consolidation and heat-treatment experiments were performed at Ames Lab to promote the exchange of oxygen from the surface oxide to the RE intermetallic to form nano-metric oxide dispersoids. Alloy selection was aided by an internal oxidation and serial grinding experiments at Ames Lab and found that Hf-containing alloys may form more stable dispersoids than Ti-containing alloy, i.e., the Hf-containing system exhibited five different oxide phases and two different intermetallics compared to the two oxide phases and one intermetallic in the Ti-containing alloys. Since the simpler Ti-containing system was less complex to characterize, and make observations on the effects of processing parameters, the Ti-containing system was selected by Ames Lab for experimental atomization trials at our partner. An internal oxidation model was developed at Ames Lab and used to predict the heat treatment times necessary for dispersoid formation as a function of powder size and temperature. A new high-pressure gas atomization (HPGA) nozzle was developed at Ames Lab with the aim of promoting fine powder production at scales similar to that of the high gas-flow and melt-flow of industrial atomizers. The atomization nozzle was characterized using schlieren imaging and aspiration pressure testing at Ames Lab to determine the optimum melt delivery tip geometry and atomization pressure to promote enhanced secondary atomization mechanisms. Six atomization trials were performed at our partner to investigate the effects of: gas atomization pressure and reactive gas concentration on the particle size distribution (PSD) and the oxygen content of the resulting powder. Also, the effect on the rapidly solidified microstructure (as a

  14. Method and apparatus for atomic imaging

    DOE Patents [OSTI]

    Saldin, Dilano K.; de Andres Rodriquez, Pedro L.

    1993-01-01

    A method and apparatus for three dimensional imaging of the atomic environment of disordered adsorbate atoms are disclosed. The method includes detecting and measuring the intensity of a diffuse low energy electron diffraction pattern formed by directing a beam of low energy electrons against the surface of a crystal. Data corresponding to reconstructed amplitudes of a wave form is generated by operating on the intensity data. The data corresponding to the reconstructed amplitudes is capable of being displayed as a three dimensional image of an adsorbate atom. The apparatus includes a source of a beam of low energy electrons and a detector for detecting the intensity distribution of a DLEED pattern formed at the detector when the beam of low energy electrons is directed onto the surface of a crystal. A device responsive to the intensity distribution generates a signal corresponding to the distribution which represents a reconstructed amplitude of a wave form and is capable of being converted into a three dimensional image of the atomic environment of an adsorbate atom on the crystal surface.

  15. Layered Atom Arrangements in Complex Materials

    SciTech Connect (OSTI)

    K.E. Sikafus; R.W.Grimes; S.M.Corish; A.R. Cleave; M.Tang; C.R.Stanek; B.P. Uberuaga; J.A.Valdez

    2005-04-15

    In this report, we develop an atom layer stacking model to describe systematically the crystal structures of complex materials. To illustrate the concepts, we consider a sequence of oxide compounds in which the metal cations progress in oxidation state from monovalent (M{sup 1+}) to tetravalent (M{sup 4+}). We use concepts relating to geometric subdivisions of a triangular atom net to describe the layered atom patterns in these compounds (concepts originally proposed by Shuichi Iida). We demonstrate that as a function of increasing oxidation state (from M{sup 1+} to M{sup 4+}), the layer stacking motifs used to generate each successive structure (specifically, motifs along a 3 symmetry axis), progress through the following sequence: MMO, MO, M{sub r}O, MO{sub r/s}O{sub u/v}, MOO (where M and O represent fully dense triangular atom nets and r/s and u/v are fractions used to describe partially filled triangular atom nets). We also develop complete crystallographic descriptions for the compounds in our oxidation sequence using trigonal space group R{bar 3}.

  16. Permutation-invariant distance between atomic configurations

    SciTech Connect (OSTI)

    Ferré, Grégoire; Maillet, Jean-Bernard; Stoltz, Gabriel

    2015-09-14

    We present a permutation-invariant distance between atomic configurations, defined through a functional representation of atomic positions. This distance enables us to directly compare different atomic environments with an arbitrary number of particles, without going through a space of reduced dimensionality (i.e., fingerprints) as an intermediate step. Moreover, this distance is naturally invariant through permutations of atoms, avoiding the time consuming associated minimization required by other common criteria (like the root mean square distance). Finally, the invariance through global rotations is accounted for by a minimization procedure in the space of rotations solved by Monte Carlo simulated annealing. A formal framework is also introduced, showing that the distance we propose verifies the property of a metric on the space of atomic configurations. Two examples of applications are proposed. The first one consists in evaluating faithfulness of some fingerprints (or descriptors), i.e., their capacity to represent the structural information of a configuration. The second application concerns structural analysis, where our distance proves to be efficient in discriminating different local structures and even classifying their degree of similarity.

  17. Efimov physics in {sup 6}Li atoms

    SciTech Connect (OSTI)

    Braaten, Eric; Hammer, H.-W.; Kang, Daekyoung; Platter, Lucas

    2010-01-15

    A new narrow three-atom loss resonance associated with an Efimov trimer crossing the three-atom threshold has recently been discovered in a many-body system of ultracold {sup 6}Li atoms in the three lowest hyperfine spin states at a magnetic field near 895 G. O'Hara and coworkers have used measurements of the three-body recombination rate in this region to determine the complex three-body parameter associated with Efimov physics. Using this parameter as the input, we calculate the universal predictions for the spectrum of Efimov states and for the three-body recombination rate in the universal region above 600 G where all three scattering lengths are large. We predict an atom-dimer loss resonance at 672+-2 G associated with an Efimov trimer disappearing through an atom-dimer threshold. We also predict an interference minimum in the three-body recombination rate at 759+-1 G where the three-spin mixture may be sufficiently stable to allow experimental study of the many-body system.

  18. Atomic-Level Sculpting of Crystalline Oxides: Toward Bulk Nanofabrication with Single Atomic Plane Precision

    SciTech Connect (OSTI)

    Jesse, Stephen; He, Qian; Lupini, Andrew R.; Leonard, Donovan N.; Oxley, Mark P.; Ovchinnikov, Oleg; Unocic, Raymond R.; Tselev, Alexander; Fuentes-Cabrera, Miguel; Sumpter, Bobby G.; Pennycook, Stephen J.; Kalinin, Sergei V.; Borisevich, Albina Y.

    2015-10-19

    We demonstrate atomic-level sculpting of 3D crystalline oxide nanostructures from metastable amorphous layer in a scanning transmission electron microscope (STEM). Strontium titanate nanostructures grow epitaxially from the crystalline substrate following the beam path. This method can be used for fabricating crystalline structures as small as 1-2 nm and the process can be observed in situ with atomic resolution. We further demonstrate fabrication of arbitrary shape structures via control of the position and scan speed of the electron beam. Combined with broad availability of the atomic resolved electron microscopy platforms, these observations suggest the feasibility of large scale implementation of bulk atomic-level fabrication as a new enabling tool of nanoscience and technology, providing a bottom-up, atomic-level complement to 3D printing.

  19. Atomic-Level Sculpting of Crystalline Oxides: Toward Bulk Nanofabrication with Single Atomic Plane Precision

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Jesse, Stephen; He, Qian; Lupini, Andrew R.; Leonard, Donovan N.; Oxley, Mark P.; Ovchinnikov, Oleg; Unocic, Raymond R.; Tselev, Alexander; Fuentes-Cabrera, Miguel; Sumpter, Bobby G.; et al

    2015-10-19

    We demonstrate atomic-level sculpting of 3D crystalline oxide nanostructures from metastable amorphous layer in a scanning transmission electron microscope (STEM). Strontium titanate nanostructures grow epitaxially from the crystalline substrate following the beam path. This method can be used for fabricating crystalline structures as small as 1-2 nm and the process can be observed in situ with atomic resolution. We further demonstrate fabrication of arbitrary shape structures via control of the position and scan speed of the electron beam. Combined with broad availability of the atomic resolved electron microscopy platforms, these observations suggest the feasibility of large scale implementation of bulkmore » atomic-level fabrication as a new enabling tool of nanoscience and technology, providing a bottom-up, atomic-level complement to 3D printing.« less

  20. A History of the Atomic Energy Commission | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Atomic Energy Commission A History of the Atomic Energy Commission A History of the Atomic Energy Commission - written by Alice L. Buck Washington, D.C.: U.S. Department of Energy, July 1983. 41 pp. AEC History.pdf (1.01 MB) More Documents & Publications The History of Nuclear Energy The Manhattan Project Hewlett and Holl - Atoms for Peace and War

  1. International energy agency

    SciTech Connect (OSTI)

    Not Available

    1988-01-01

    The International Energy Agency's emergency oil sharing system is designed to enable member nations to share oil supplied during an oil supply disruption equal to or exceeding 7 percent or more of members' oil supplies. However, participation could have anticompetitive consequences and under U.S. antitrust laws could result in suits against U.S. companies. To ensure participation of major U.S. oil companies, legislation provides a statutory defense against any civil or criminal suit brought under federal or state antitrust laws for some actions. This report describes efforts to expand the antitrust and breach of contract defenses for oil company supply transactions during an oil emergency and to resolve the problem of foreign blockage of information critical to U.S. antitrust review of oil transactions involving foreign affiliates of U.S. companies.

  2. International Energy Agency

    SciTech Connect (OSTI)

    Not Available

    1988-03-01

    The International Energy Agency's emergency oil sharing system is designed to enable member nations to share oil supplies during an oil supply disruption equal to or exceeding 7 percent or more of members' oil supplies. However, participation could have anticompetitive consequences and under U.S. antitrust laws could result in suits against U.S. companies. To ensure participation of major U.S. oil companies, legislation provides a statutory defense against any civil or criminal suit brought under federal or state antitrust laws for some actions. This report describes efforts to expand the antitrust and breach of contract defenses for oil company supply transactions during an oil emergency and to resolve the problem of foreign blockage of information critical to U.S. antitrust review of oil transactions involving foreign affilitates of U.S. companies.

  3. International Energy Outlook 2013

    Gasoline and Diesel Fuel Update (EIA)

    5 U.S. Energy Information Administration | International Energy Outlook 2013 Reference case projections by end-use sector and country grouping Table F1. Total world delivered energy consumption by end-use sector and fuel, 2010-2040 (quadrillion Btu) Sector/fuel Projections Average annual percent change, 2010-2040 2010 2015 2020 2025 2030 2035 2040 Residential Liquids 9.5 9.5 9.1 8.9 8.7 8.5 8.3 -0.4 Natural gas 19.9 20.8 22.6 24.8 27.1 29.0 30.8 1.5 Coal 4.6 4.4 4.5 4.5 4.4 4.4 4.3 -0.3

  4. International Energy Outlook 2013

    Gasoline and Diesel Fuel Update (EIA)

    5 U.S. Energy Information Administration | International Energy Outlook 2013 Reference case projections by end-use sector and country grouping Table F11. Delivered energy consumption in Russia by end-use sector and fuel, 2010-2040 (quadrillion Btu) Sector/fuel Projections Average annual percent change, 2010-2040 2010 2015 2020 2025 2030 2035 2040 Residential Liquids 0.3 0.3 0.3 0.3 0.3 0.3 0.3 -0.7 Natural gas 2.8 2.7 2.8 2.9 3.1 3.3 3.5 0.8 Coal 0.3 0.3 0.3 0.3 0.2 0.2 0.2 -1.5 Electricity 0.4

  5. International Energy Outlook 2013

    Gasoline and Diesel Fuel Update (EIA)

    7 U.S. Energy Information Administration | International Energy Outlook 2013 Reference case projections by end-use sector and country grouping Table F13. Delivered energy consumption in China by end-use sector and fuel, 2010-2040 (quadrillion Btu) Sector/fuel Projections Average annual percent change, 2010-2040 2010 2015 2020 2025 2030 2035 2040 Residential Liquids 1.2 1.1 1.1 1.1 1.0 1.0 0.9 -1.0 Natural gas 0.9 1.6 2.5 3.5 4.7 5.9 7.1 7.2 Coal 3.0 2.9 3.0 3.0 3.0 3.0 2.9 -0.2 Electricity 1.8

  6. International Energy Outlook 2013

    Gasoline and Diesel Fuel Update (EIA)

    9 U.S. Energy Information Administration | International Energy Outlook 2013 Reference case projections by end-use sector and country grouping Table F15. Delivered energy consumption in Other Non-OECD Asia by end-use sector and fuel, 2010-2040 (quadrillion Btu) Sector/fuel Projections Average annual percent change, 2010-2040 2010 2015 2020 2025 2030 2035 2040 Residential Liquids 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.3 Natural gas 0.4 0.4 0.6 0.7 0.8 0.9 1.1 3.7 Coal 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.4

  7. International Energy Outlook 2013

    Gasoline and Diesel Fuel Update (EIA)

    1 U.S. Energy Information Administration | International Energy Outlook 2013 Reference case projections by end-use sector and country grouping Table F17. Delivered energy consumption in Africa by end-use sector and fuel, 2010-2040 (quadrillion Btu) Sector/fuel Projections Average annual percent change, 2010-2040 2010 2015 2020 2025 2030 2035 2040 Residential Liquids 0.7 0.7 0.7 0.7 0.7 0.8 0.8 0.5 Natural gas 0.2 0.2 0.3 0.3 0.4 0.5 0.6 3.4 Coal 0.1 0.1 0.1 0.1 0.1 0.2 0.2 2.5 Electricity 0.6

  8. International Energy Outlook 2013

    Gasoline and Diesel Fuel Update (EIA)

    3 U.S. Energy Information Administration | International Energy Outlook 2013 Reference case projections by end-use sector and country grouping Table F19. Delivered energy consumption in Other Central and South America by end-use sector and fuel, 2010-2040 (quadrillion Btu) Sector/fuel Projections Average annual percent change, 2010-2040 2010 2015 2020 2025 2030 2035 2040 Residential Liquids 0.3 0.4 0.3 0.3 0.3 0.3 0.3 -0.1 Natural gas 0.4 0.5 0.6 0.7 0.8 1.0 1.1 3.2 Coal 0.0 0.0 0.0 0.0 0.0 0.0

  9. International Energy Outlook 2013

    Gasoline and Diesel Fuel Update (EIA)

    7 U.S. Energy Information Administration | International Energy Outlook 2013 Reference case projections by end-use sector and country grouping Table F3. Delivered energy consumption in the United States by end-use sector and fuel, 2010-2040 (quadrillion Btu) Sector/fuel Projections Average annual percent change, 2010-2040 2010 2015 2020 2025 2030 2035 2040 Residential Liquids 1.1 1.1 1.0 1.0 0.9 0.9 0.9 -1.0 Natural gas 4.9 4.8 4.6 4.5 4.5 4.3 4.2 -0.5 Coal 0.0 0.0 0.0 0.0 0.0 0.0 0.0 -1.6

  10. International Energy Outlook 2013

    Gasoline and Diesel Fuel Update (EIA)

    9 U.S. Energy Information Administration | International Energy Outlook 2013 Reference case projections by end-use sector and country grouping Table F5. Delivered energy consumption in Mexico and Chile by end-use sector and fuel, 2010-2040 (quadrillion Btu) Sector/fuel Projections Average annual percent change, 2010-2040 2010 2015 2020 2025 2030 2035 2040 Residential Liquids 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.1 Natural gas 0.1 0.1 0.1 0.1 0.1 0.1 0.1 3.4 Coal 0.0 0.0 0.0 0.0 0.0 0.0 0.0 -0.2

  11. International Energy Outlook 2013

    Gasoline and Diesel Fuel Update (EIA)

    1 U.S. Energy Information Administration | International Energy Outlook 2013 Reference case projections by end-use sector and country grouping Table F7. Delivered energy consumption in Japan by end-use sector and fuel, 2010-2040 (quadrillion Btu) Sector/fuel Projections Average annual percent change, 2010-2040 2010 2015 2020 2025 2030 2035 2040 Residential Liquids 0.6 0.5 0.5 0.5 0.5 0.4 0.4 -1.2 Natural gas 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.3 Coal 0.0 0.0 0.0 0.0 0.0 0.0 0.0 -- Electricity 1.1 1.2

  12. International Energy Outlook 2013

    Gasoline and Diesel Fuel Update (EIA)

    3 U.S. Energy Information Administration | International Energy Outlook 2013 Reference case projections by end-use sector and country grouping Table F9. Delivered energy consumption in Australia/New Zealand by end-use sector and fuel, 2008-2035 (quadrillion Btu) Sector/fuel Projections Average annual percent change, 2010-2040 2010 2015 2020 2025 2030 2035 2040 Residential Liquids 0.0 0.0 0.0 0.0 0.0 0.0 0.0 -- Natural gas 0.1 0.1 0.2 0.2 0.2 0.2 0.2 1.5 Coal 0.0 0.0 0.0 0.0 0.0 0.0 0.0 --

  13. International Energy Outlook 2013

    Gasoline and Diesel Fuel Update (EIA)

    9 U.S. Energy Information Administration | International Energy Outlook 2013 High Oil Price case projections Table D1. World total primary energy consumption by region, High Oil Price case, 2009-2040 (quadrillion Btu) Region History Projections Average annual percent change, 2010-2040 2009 2010 2015 2020 2025 2030 2035 2040 OECD OECD Americas 117.0 120.2 119.5 124.2 128.2 131.8 136.7 144.7 0.6 United States a 94.9 97.9 96.0 99.4 100.9 101.4 103.0 107.3 0.3 Canada 13.7 13.5 13.9 14.3 15.3 16.4

  14. International District Energy Association

    Broader source: Energy.gov [DOE]

    Since its formation in 1909, the International District Energy Association (IDEA) has served as a principal industry advocate and management resource for owners, operators, developers, and suppliers of district heating and cooling systems in cities, campuses, bases, and healthcare facilities. Today, with over 1,400 members in 26 countries, IDEA continues to organize high-quality technical conferences that inform, connect, and advance the industry toward higher energy efficiency and lower carbon emissions through innovation and investment in scalable sustainable solutions. With the support of DOE, IDEA performs industry research and market analysis to foster high impact projects and help transform the U.S. energy industry. IDEA was an active participant in the original Vision and Roadmap process and has continued to partner with DOE on combined heat and power (CHP) efforts across the country.

  15. Control Techtronics International

    SciTech Connect (OSTI)

    West, J.

    1995-12-31

    Polish graded coal can be burned in existing stoker boilers and meet the 1998 Air Quality standard. This is accomplished with the Control Techtronics microprocessor-based combustion controller accurately and repeatedly: (a) matching the combustion air to the coal firing rate, with continuous stack sensor feedback; (b) continuously varying the boiler`s firing rate based on output water temperature or steam pressure; (c) continuously varying the exhaust fan`s speed to maintain minimum negative pressure in the boiler`s combustion chamber; and recirculating a portion of the flue gas, at varying amounts throughout the boiler`s firing rate. Systems for five boilers have been installed and are operating on MPEC`s Balicka plant in Krakow. Control Techtronics International has $10 million of U.S. Export-Import Bank funds available for similar projects throughout Poland.

  16. International Nuclear Safeguards Inspection Support Tool (INSIST)

    SciTech Connect (OSTI)

    St. Pierre, D.E.; Steinmaus, K.L.; Moon, B.D.

    1994-07-01

    DOE is committed to providing technologies to the International Atomic Energy Agency (IAEA) to meet escalating monitoring and inspection requirements associated with the Non-Proliferation Treaty (NPT). One example of technology provided to the IAEA is the information management and remote monitoring capabilities being customized for the IAEA by the International Safeguards Division of the Office of Non-Proliferation and National Security. The ongoing Safeguards Information Management Systems (SIMS) program is an interlaboratory effort providing the IAEA with a range of information management capabilities designed to enhance the effectiveness of their nuclear inspection activities. The initial commitment involved the customization of computer capabilities to provide IAEA with the basic capability to geographically organize, store, and retrieve the large quantity of information involved in their nuclear on site inspection activities in Iraq. This initial system, the International Nuclear Safeguards Inspection Support Tool (INSIST), was developed by DOE`s Pacific Northwest Laboratory (PNL). To date, two INSIST workstations have been deployed at the IAEA. The first has been used to support the IAEA Action Team in the inspection of Iraqi nuclear facilities since August 1993. A second, and similar, workstation has been deployed to support environmental monitoring under the IAEA 93+2 Programme. Both INSIST workstations geographically integrate analog (video) and digital data to provide an easy to use and effective tool for storing retrieving and displaying multimedia site and facility information including world-wide maps, satellite and aerial imagery, on site photography, live inspection videos, and treaty and inspection textual information. The interactive, UNIX-based workstations have a variety of peripheral devices for information input and output. INSIST software includes commercial-off-the-shelf (COTS) modules and application-specific code developed at PNL.

  17. Rotary internal combustion engine

    SciTech Connect (OSTI)

    Murray, J.L.

    1993-07-20

    A multi bank power plant is described comprising at least a first and a second rotary internal combustion engine connectable together in series, each of the engines comprising: a housing; a cam track internally disposed within the housing and adapted to receive a cam follower; an engine block disposed within the housing and rotatable about a central axis; an output shaft extending axially from each the engine block, each output shaft being coaxial with the other; means for coupling the output shafts together so that the output shafts rotate together in the same direction at the same speed; at least one radially arranged cylinder assembly on each block, each cylinder assembly including a cylinder having a longitudinal axis extending generally radially outwardly from the rotational axis of the block, the cylinder including means defining an end wall, a piston member disposed within the cylinder and adapted to reciprocate within the cylinder; a combustion chamber, means permitting periodic introduction of air and fuel into the combustion chamber, means for causing combustion of a compressed mixture of air and fuel within the combustion chamber, means permitting periodic exhaust of products of combustion of air and fuel from the combustion chamber, and means for imparting forces and motions of the piston within the cylinder to and from the cam track, the means comprising a cam follower operatively connected to the piston; wherein the cam track includes at least a first segment and at least a second segment thereof, the first segment having a generally positive slope wherein the segment has a generally increasing radial distance from the rotational axis of the engine block whereby as a piston moves outwardly in a cylinder on a power stroke while the cam follower is in radial register with the cam track segment, the reactive force of the respective cam follower against the cam track segment acts in a direction tending to impart rotation to the engine block.

  18. SECTION IV. ATOMIC AND MOLECULAR SCIENCE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IV. ATOMIC AND MOLECULAR SCIENCE Cross Sections for Cu K-Vacancy Production in Fast Heavy Ion Collisions R.L. Watson, J.M. Blackadar and V. Horvat Enhancement of the Cu Kα x-ray Diagram Lines in Fast Heavy Ion Collisions R.L. Watson, V. Horvat and J.M. Blackadar K-shell Ionization by Secondary Electrons V. Horvat, R.L. Watson and J.M. Blackadar Target-atom Inner-shell Vacancy Distributions Created in Collisions with Heavy Ion Projectiles V. Horvat, R.L. Watson and J.M. Blackadar Systematics of

  19. Atom Probe Tomography of Nanoscale Electronic Materials

    SciTech Connect (OSTI)

    Larson, David J.; Prosa, Ty J.; Perea, Daniel E.; Inoue, Hidekazu; Mangelinck, D.

    2016-01-01

    Atom probe tomography (APT) is a mass spectrometry based on time-of-flight measurements which also concurrently produces 3D spatial information. The reader is referred to any of the other papers in this volume or to the following references for further information 4–8. The current capabilities of APT, such as detecting a low number of dopant atoms in nanoscale devices or segregation at a nanoparticle interface, make this technique an important component in the nanoscale metrology toolbox. In this manuscript, we review some of the applications of APT to nanoscale electronic materials, including transistors and finFETs, silicide contact microstructures, nanowires, and nanoparticles.

  20. Committee on Atomic, Molecular and Optical Sciences

    SciTech Connect (OSTI)

    Lancaster, James

    2015-06-30

    The Committee on Atomic, Molecular, and Optical Sciences (CAMOS) is a standing activity of the National Research Council (NRC) that operates under the auspices of the Board on Physics and Astronomy. CAMOS is one of five standing committees of the BPA that are charged with assisting it in achieving its goals—monitoring the health of physics and astronomy, identifying important new developments at the scientific forefronts, fostering interactions with other fields, strengthening connections to technology, facilitating effective service to the nation, and enhancing education in physics. CAMOS provides these capabilities for the atomic, molecular and optical (AMO) sciences.

  1. NREL: Measurements and Characterization - Atomic Force Microscopy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Atomic Force Microscopy Atomic Force Microscopy (AFM) operates in several modes. In contact mode, a tip that is attached to a cantilever is scanned over the sample surface, while the force between tip and sample is measured. While the tip is scanned laterally, the force is kept constant by moving the cantilever/tip assembly up and down, so that the deflection of the cantilever is kept constant. The vertical movement of the cantilever/tip assembly is recorded and used to generate an image of the

  2. Fidelity imaging for atomic force microscopy

    SciTech Connect (OSTI)

    Ghosal, Sayan Salapaka, Murti

    2015-01-05

    Atomic force microscopy is widely employed for imaging material at the nanoscale. However, real-time measures on image reliability are lacking in contemporary atomic force microscopy literature. In this article, we present a real-time technique that provides an image of fidelity for a high bandwidth dynamic mode imaging scheme. The fidelity images define channels that allow the user to have additional authority over the choice of decision threshold that facilitates where the emphasis is desired, on discovering most true features on the sample with the possible detection of high number of false features, or emphasizing minimizing instances of false detections. Simulation and experimental results demonstrate the effectiveness of fidelity imaging.

  3. Analysis of a magnetically trapped atom clock

    SciTech Connect (OSTI)

    Kadio, D.; Band, Y. B.

    2006-11-15

    We consider optimization of a rubidium atom clock that uses magnetically trapped Bose condensed atoms in a highly elongated trap, and determine the optimal conditions for minimum Allan variance of the clock using microwave Ramsey fringe spectroscopy. Elimination of magnetic field shifts and collisional shifts are considered. The effects of spin-dipolar relaxation are addressed in the optimization of the clock. We find that for the interstate interaction strength equal to or larger than the intrastate interaction strengths, a modulational instability results in phase separation and symmetry breaking of the two-component condensate composed of the ground and excited hyperfine clock levels, and this mechanism limits the clock accuracy.

  4. Isolating and moving single atoms using silicon nanocrystals

    DOE Patents [OSTI]

    Carroll, Malcolm S.

    2010-09-07

    A method is disclosed for isolating single atoms of an atomic species of interest by locating the atoms within silicon nanocrystals. This can be done by implanting, on the average, a single atom of the atomic species of interest into each nanocrystal, and then measuring an electrical charge distribution on the nanocrystals with scanning capacitance microscopy (SCM) or electrostatic force microscopy (EFM) to identify and select those nanocrystals having exactly one atom of the atomic species of interest therein. The nanocrystals with the single atom of the atomic species of interest therein can be sorted and moved using an atomic force microscope (AFM) tip. The method is useful for forming nanoscale electronic and optical devices including quantum computers and single-photon light sources.

  5. Atomic-level imaging, processing and characterization of semiconductor surfaces

    DOE Patents [OSTI]

    Kazmerski, Lawrence L.

    1995-01-01

    A method for selecting and removing single specific atoms from a solid material surface uses photon biasing to break down bonds that hold the selected atom in the lattice and to reduce barrier effects that hold the atom from transferring to a probe. The photon bias is preferably light or other electromagnetic radiation with a wavelength and frequency that approximately matches the wave function of the target atom species to be removed to induce high energy, selective thermionic-like vibration. An electric field potential is then applied between the probe and the surface of the solid material to pull the atom out of the lattice and to transfer the atom to the probe. Different extrinsic atoms can be installed in the lattice sites that are vacated by the removed atoms by using a photon bias that resonates the extrinsic atom species, reversing polarity of the electric field, and blowing gas comprising the extrinsic atoms through a hollow catheter probe.

  6. Atomic-level imaging, processing and characterization of semiconductor surfaces

    DOE Patents [OSTI]

    Kazmerski, L.L.

    1995-08-22

    A method for selecting and removing single specific atoms from a solid material surface uses photon biasing to break down bonds that hold the selected atom in the lattice and to reduce barrier effects that hold the atom from transferring to a probe. The photon bias is preferably light or other electromagnetic radiation with a wavelength and frequency that approximately matches the wave function of the target atom species to be removed to induce high energy, selective thermionic-like vibration. An electric field potential is then applied between the probe and the surface of the solid material to pull the atom out of the lattice and to transfer the atom to the probe. Different extrinsic atoms can be installed in the lattice sites that are vacated by the removed atoms by using a photon bias that resonates the extrinsic atom species, reversing polarity of the electric field, and blowing gas comprising the extrinsic atoms through a hollow catheter probe. 8 figs.

  7. Solaire France International | Open Energy Information

    Open Energy Info (EERE)

    France International Jump to: navigation, search Name: Solaire France International Place: France Sector: Solar Product: International subsidiary of Solaire France, a developer and...

  8. Renewable Energy Institute International | Open Energy Information

    Open Energy Info (EERE)

    International Jump to: navigation, search Logo: Renewable Energy Institute International Name: Renewable Energy Institute International Address: 5022 Bailey Loop Place: McClellan,...

  9. International Refrigeration: Order (2012-CE-1510) | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Refrigeration: Order (2012-CE-1510) International Refrigeration: Order (2012-CE-1510) July 20, 2012 DOE ordered International Refrigeration Products to pay an 8,000 ...

  10. International science conferences in Santa Fe

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    International science conferences International science conferences in Santa Fe The conference are 2012 International Conference on Defects in Insulating Materials and Computer ...

  11. Mobility of atoms under ion bombardment

    SciTech Connect (OSTI)

    Alekseevskii, V.; Gertsriken, D.; Kovtun, V.; Tyshkevich, V.; Fal'chenko, V.

    1981-10-01

    Argon ions bombardment (Eapprox.1KeV) of Armco iron in a cold glow discharge plasma (T< or approx. =150/sup 0/C) has been performed to investigate the mobility and behavior of the atoms in the crystal lattice and the formation of a solid solution of Argon in iron.(AIP)

  12. Quantum measurements of atoms using cavity QED

    SciTech Connect (OSTI)

    Dada, Adetunmise C.; Andersson, Erika [SUPA, School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh EH14 4AS (United Kingdom); Jones, Martin L.; Kendon, Vivien M. [School of Physics and Astronomy, University of Leeds, Woodhouse Lane, Leeds LS2 9JT (United Kingdom); Everitt, Mark S. [School of Physics and Astronomy, University of Leeds, Woodhouse Lane, Leeds LS2 9JT (United Kingdom); National Institute of Informatics, 2-1-2 Hitotsubashi, Chiyoda ku, Tokyo 101-8430 (Japan)

    2011-04-15

    Generalized quantum measurements are an important extension of projective or von Neumann measurements in that they can be used to describe any measurement that can be implemented on a quantum system. We describe how to realize two nonstandard quantum measurements using cavity QED. The first measurement optimally and unambiguously distinguishes between two nonorthogonal quantum states. The second example is a measurement that demonstrates superadditive quantum coding gain. The experimental tools used are single-atom unitary operations effected by Ramsey pulses and two-atom Tavis-Cummings interactions. We show how the superadditive quantum coding gain is affected by errors in the field-ionization detection of atoms and that even with rather high levels of experimental imperfections, a reasonable amount of superadditivity can still be seen. To date, these types of measurements have been realized only on photons. It would be of great interest to have realizations using other physical systems. This is for fundamental reasons but also since quantum coding gain in general increases with code word length, and a realization using atoms could be more easily scaled than existing realizations using photons.

  13. Nano-soldering to single atomic layer

    DOE Patents [OSTI]

    Girit, Caglar O.; Zettl, Alexander K.

    2011-10-11

    A simple technique to solder submicron sized, ohmic contacts to nanostructures has been disclosed. The technique has several advantages over standard electron beam lithography methods, which are complex, costly, and can contaminate samples. To demonstrate the soldering technique graphene, a single atomic layer of carbon, has been contacted, and low- and high-field electronic transport properties have been measured.

  14. Atomic power in space: A history

    SciTech Connect (OSTI)

    Not Available

    1987-03-01

    ''Atomic Power in Space,'' a history of the Space Isotope Power Program of the United States, covers the period from the program's inception in the mid-1950s through 1982. Written in non-technical language, the history is addressed to both the general public and those more specialized in nuclear and space technologies. 19 figs., 3 tabs.

  15. Atomic physics with highly charged ions

    SciTech Connect (OSTI)

    Richard, P.

    1991-08-01

    This report discusses: One electron outer shell processes in fast ion-atom collisions; role of electron-electron interaction in two-electron processes; multi-electron processes at low energy; multi-electron processes at high energy; inner shell processes; molecular fragmentation studies; theory; and, JRM laboratory operations.

  16. Theory of multiphoton ionization of atoms

    SciTech Connect (OSTI)

    Szoeke, A.

    1986-03-01

    A non-perturbative approach to the theory of multiphoton ionization is reviewed. Adiabatic Floquet theory is its first approximation. It explains qualitatively the energy and angular distribution of photoelectrons. In many-electron atoms it predicts collective and inner shell excitation. 14 refs.

  17. International energy outlook 1999

    SciTech Connect (OSTI)

    1999-03-01

    This report presents international energy projections through 2020, prepared by the Energy Information Administration. The outlooks for major energy fuels are discussed, along with electricity, transportation, and environmental issues. The report begins with a review of world trends in energy demand. The historical time frame begins with data from 1970 and extends to 1996, providing readers with a 26-year historical view of energy demand. The IEO99 projections covers a 24-year period. The next part of the report is organized by energy source. Regional consumption projections for oil, natural gas, coal, nuclear power, and renewable energy (hydroelectricity, geothermal, wind, solar, and other renewables) are presented in the five fuel chapters, along with a review of the current status of each fuel on a worldwide basis. The third part of the report looks at energy consumption in the end-use sectors, beginning with a chapter on energy use for electricity generation. New to this year`s outlook are chapters on energy use in the transportation sector and on environmental issues related to energy consumption. 104 figs., 87 tabs.

  18. Molecular Beam Studies of Hot Atom Chemical Reactions: Reactive Scattering of Energetic Deuterium Atoms

    DOE R&D Accomplishments [OSTI]

    Continetti, R. E.; Balko, B. A.; Lee, Y. T.

    1989-02-01

    A brief review of the application of the crossed molecular beams technique to the study of hot atom chemical reactions in the last twenty years is given. Specific emphasis is placed on recent advances in the use of photolytically produced energetic deuterium atoms in the study of the fundamental elementary reactions D + H{sub 2} -> DH + H and the substitution reaction D + C{sub 2}H{sub 2} -> C{sub 2}HD + H. Recent advances in uv laser and pulsed molecular beam techniques have made the detailed study of hydrogen atom reactions under single collision conditions possible.

  19. The atomization of water-oil emulsions

    SciTech Connect (OSTI)

    Broniarz-Press, L.; Ochowiak, M.; Rozanski, J.; Woziwodzki, S.

    2009-09-15

    The paper presents the results of experimental studies on atomization of the emulsions flowing through twin-fluid atomizers obtained by the use of the digital microphotography method. The main elements of the test installation were: nozzle, reservoir, pump and measurement units of liquid flow. The photographs were taken by a digital camera with automatic flash at exposure time of 1/8000 s and subsequently analyzed using Image Pro-Plus. The oils used were mineral oils 20-90, 20-70, 20-50 and 20-30. The studies were performed at flow rates of liquid phase changed from 0.0014 to 0.011 (dm{sup 3}/s) and gas phase changed from 0.28 to 1.4 (dm{sup 3}/s), respectively. The analysis of photos shows that the droplets being formed during the liquid atomization have very different sizes. The smallest droplets have diameters of the order of 10 {mu}m. The experimental results showed that the changes in physical properties of a liquid phase lead to the significant changes in the spray characteristics. The analysis of the photos of water and emulsions atomization process showed that the droplet sizes are dependent on gas and liquid flow rates, construction of nozzle and properties of liquid. The differences between characteristics of atomization for water and emulsions have been observed. Analysis of photos on forming the droplets in air-water and air-emulsions systems showed that droplets are bigger in air-emulsion system (at the same value of gas to liquid mass ratio). The values of Sauter mean diameter (SMD) increased with increase of volume fraction of oil in emulsion. The droplet size increased with emulsion viscosity. (author)

  20. International News | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International News International News April 14, 2016 International News EM Shares Waste Isolation Pilot Plant Lessons Learned with Nuclear Energy Agency PARIS - EM officials shared lessons learned from the 2014 Waste Isolation Pilot Plant underground fire and radiological release with the Nuclear Energy Agency (NEA) Division of Radiological Protection and Radioactive Waste Management in a seminar in Paris recently. December 29, 2015 The UK delegation gathers at the front of the H Reactor core.

  1. MEISPP Interns Begin Summer Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    Today the Minority Educational Institution Student Partnership Program (MEISPP) intern orientation was held at Department of Energy Headquarters in Washington, DC. Students came from Historically...

  2. ICF International | Open Energy Information

    Open Energy Info (EERE)

    search Name: ICF International Address: 9300 Lee Highway, Fairfax, VA 22031-1207 USA Place: Washington, District of Columbia Year Founded: 1969 References: http:...

  3. International Conference on Ocean Energy

    Broader source: Energy.gov [DOE]

    Join the Energy Department in Edinburgh, Scotland from February 23–25th for the International Conference on Ocean Energy (ICOE) conference.

  4. International Quality Assurance Standards (Presentation)

    SciTech Connect (OSTI)

    Kurtz, S.; Hacke, P.; Wohlgemuth, J.; Kempe, M.; Yamamichi, M.

    2011-02-01

    Tests to make quantitative predictions about photovoltaic (PV) modules are needed. This presentation proposes the creation of international quality assurance standards for PV modules.

  5. DEK International | Open Energy Information

    Open Energy Info (EERE)

    search Name: DEK International Place: Flemington, New Jersey Zip: 8822 Product: Electronics deposition company, whose technology has applications for PV. Coordinates:...

  6. International Marine Renewable Energy Conference

    Broader source: Energy.gov [DOE]

    The International Marine Renewable Energy Conference (IMREC) offers researchers, technology developers, policy makers, NGOs, and industry representatives the opportunity to discuss financing...

  7. International Energy Program Evaluation Conference

    Broader source: Energy.gov [DOE]

    The International Energy Program Evaluation Conference (IEPEC) is a three-day conference for energy program implementers, academic researchers, and state, local, and national energy representatives.

  8. Enerco International | Open Energy Information

    Open Energy Info (EERE)

    search Name: Enerco International Place: Bratislava, Slovakia Zip: 81101 Product: An Italian-British company involved in planning and realisation of PV power plants and utility...

  9. International Energy Module - NEMS Documentation

    Reports and Publications (EIA)

    2014-01-01

    Summarizes the overall structure of the International Energy Model and its interface with other NEMS modules, mathematical specifications of behavioral relationships, and data sources and estimation methods.

  10. High data-rate atom interferometers through high recapture efficiency

    SciTech Connect (OSTI)

    Biedermann, Grant; Rakholia, Akash Vrijal; McGuinness, Hayden

    2015-01-27

    An inertial sensing system includes a magneto-optical trap (MOT) that traps atoms within a specified trapping region. The system also includes a cooling laser that cools the trapped atoms so that the atoms remain within the specified region for a specified amount of time. The system further includes a light-pulse atom interferometer (LPAI) that performs an interferometric interrogation of the atoms to determine phase changes in the atoms. The system includes a controller that controls the timing of MOT and cooling laser operations, and controls the timing of interferometric operations to substantially recapture the atoms in the specified trapping region. The system includes a processor that determines the amount inertial movement of the inertial sensing system based on the determined phase changes in the atoms. Also, a method of inertial sensing using this inertial sensing system includes recapture of atoms within the MOT following interferometric interrogation by the LPAI.

  11. A self-injected, diode-pumped, solid-state ring laser for laser cooling of Li atoms

    SciTech Connect (OSTI)

    Miake, Yudai; Mukaiyama, Takashi; O’Hara, Kenneth M.; Gensemer, Stephen

    2015-04-15

    We have constructed a solid-state light source for experiments with laser cooled lithium atoms based on a Nd:Y V O{sub 4} ring laser with second-harmonic generation. Unidirectional lasing, an improved mode selection, and a high output power of the ring laser were achieved by weak coupling to an external cavity which contained the lossy elements required for single frequency operation. Continuous frequency tuning is accomplished by controlling two piezoelectric transducers (PZTs) in the internal and the external cavities simultaneously. The light source has been utilized to trap and cool fermionic lithium atoms into the quantum degenerate regime.

  12. Fourth International Conference on High Energy Density Physics

    SciTech Connect (OSTI)

    Beg, Farhat

    2015-01-06

    The Fourth International Conference on High Energy Density Physics (ICHED 2013) was held in Saint Malo, France, at the Palais du Grand Large on 25-28 June 2013 (http://web.luli.polytechnique.fr/ICHED2013/). This meeting was the fourth in a series which was first held in 2008. This conference covered all the important aspects of High Energy Density Physics including fundamental topics from strong-field physics to creating new states of matter (including radiation-dominated, high-pressure quantum and relativistic plasmas) and ultra-fast lattice dynamics on the timescale of atomic transitions.

  13. Lesson 3 - Atoms and Isotopes | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 - Atoms and Isotopes Lesson 3 - Atoms and Isotopes You've probably heard people refer to nuclear energy as "atomic energy." Why? Nuclear energy is the energy that is stored in the bonds of atoms, inside the nucleus. Nuclear power plants are designed to capture this energy as heat and convert it to electricity. This lesson looks closely at what atoms are and how atoms store energy. This lesson covers the following topics: Matter Molecules Elements Chemical reaction Periodic table The

  14. Elementary! A Nuclear Forensics Workshop Teaches Vital Skills to International Practitioners

    SciTech Connect (OSTI)

    Brim, Cornelia P.; Minnema, Lindsay T.

    2014-04-01

    The article describes the Nuclear Forensics Workshop sponsored by the International Atomic Energy Agency (IAEA), the Office of Nonproliferation and International Security (NIS) and hosted by Pacific Northwest National Laboratory October 28-November 8, 2013 in Richland,Washington. Twenty-six participants from 10 countries attended the workshop. Experts from from Los Alamos, Lawrence Livermore, and Pacific Northwest national laboratories collaborated with an internationally recognized cadre of experts from the U.S. Department of Homeland Security and other U.S. agencies, IAEA, the Australian Nuclear Science and Technology Organisation, the United Kingdom Atomic Weapons Establishment (AWE), and the European Union Joint Research Center Institute for Transuranium Elements, to train practitioners in basic methodologies of nuclear forensic examinations.

  15. General Atomics Compliance Order, October 6, 1995

    Office of Environmental Management (EM)

    Gary Samore About Us Gary Samore - Executive Director for Research, Belfer Center for Science and International Affairs at the Kennedy School of Government, Harvard University Gary Samore As of February 2013, Dr. Gary Samore is the Executive Director for Research at the Belfer Center for Science and International Affairs at the Kennedy School of Government at Harvard University. He is also a non-resident Senior Fellow at the Brookings Institution and member of the advisory board for United

  16. Denver University - International Institute for Environment and...

    Open Energy Info (EERE)

    - International Institute for Environment and Enterprise Name: Denver University - International Institute for Environment and Enterprise Address: 2199 S. University Blvd....

  17. International Energy Agency Feed | Open Energy Information

    Open Energy Info (EERE)

    International Institute for Sustainable Development (IISD) International Renewable Energy Agency (IRENA) Joint Implementation Network (JIN) Kumasi Institute of Technology and...

  18. Plasmatron Fuel Reformer Development and Internal Combustion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Plasmatron Fuel Reformer Development and Internal Combustion Engine Vehicle Applications Plasmatron Fuel Reformer Development and Internal Combustion Engine Vehicle Applications ...

  19. Semiconductor Manufacturing International Corp SMIC | Open Energy...

    Open Energy Info (EERE)

    Manufacturing International Corp SMIC Jump to: navigation, search Name: Semiconductor Manufacturing International Corp (SMIC) Place: Shanghai, Shanghai Municipality, China Zip:...

  20. Biodesel International Corporation | Open Energy Information

    Open Energy Info (EERE)

    navigation, search Name: Biodesel International Corporation Place: Texas Product: A biodiesel producer and seller of biodiesel equipment. References: Biodesel International...

  1. Exorka International Limited | Open Energy Information

    Open Energy Info (EERE)

    Exorka International Limited is a specialist developer of low-temperature geothermal electricity generation, incorporated in England. References: Exorka International...

  2. Upcoming Webinar December 16: International Hydrogen Infrastructure...

    Office of Environmental Management (EM)

    Upcoming Webinar December 16: International Hydrogen Infrastructure Challenges NOW, DOE, and NEDO Upcoming Webinar December 16: International Hydrogen Infrastructure Challenges ...

  3. International Hydrogen Infrastructure Challenges Workshop Summary...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Hydrogen Infrastructure Challenges Workshop Summary - NOW, NEDO, and DOE International Hydrogen Infrastructure Challenges Workshop Summary - NOW, NEDO, and DOE ...

  4. Aqua Farms International Aquaculture Low Temperature Geothermal...

    Open Energy Info (EERE)

    Farms International Aquaculture Low Temperature Geothermal Facility Jump to: navigation, search Name Aqua Farms International Aquaculture Low Temperature Geothermal Facility...

  5. Webinar: International Hydrogen Infrastructure Challenges Workshop...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Hydrogen Infrastructure Challenges Workshop Summary - NOW, NEDO, and DOE Webinar: International Hydrogen Infrastructure Challenges Workshop Summary - NOW, NEDO, and ...

  6. International Partnerships for the Hydrogen Economy Fact Sheet | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy International

  7. Internal Audit | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Internal Audit Internal auditing is an independent, objective assurance and consulting activity designed to add value and improve an organization's operations. It helps an organization accomplish its objectives by bringing a systematic, disciplined approach to evaluate and improve the effectiveness of risk management, control, and governance processes. For information, contact: Fran Dunshee, 515-294-8098 dunshee@ameslab.gov

  8. Chiral meta-atoms rotated by light

    SciTech Connect (OSTI)

    Liu Mingkai; Powell, David A.; Shadrivov, Ilya V.

    2012-07-16

    We study the opto-mechanical properties of coupled chiral meta-atoms based on a pair of twisted split-ring resonators. By using a simple analytical model in conjunction with the Maxwell stress tensor, we capture insight into the mechanism and find that this structure can be used as a general prototype of subwavelength light-driven actuators over a wide range of frequencies. This coupled structure can provide a strong and tunable torque, and can support different opto-mechanical modes, including uniform rotation, periodically variable rotation and damped oscillations. Our results suggest that chiral meta-atoms are good candidates for creating sub-wavelength motors or wrenches controlled by light.

  9. First principle thousand atom quantum dot calculations

    SciTech Connect (OSTI)

    Wang, Lin-Wang; Li, Jingbo

    2004-03-30

    A charge patching method and an idealized surface passivation are used to calculate the single electronic states of IV-IV, III-V, II-VI semiconductor quantum dots up to a thousand atoms. This approach scales linearly and has a 1000 fold speed-up compared to direct first principle methods with a cost of eigen energy error of about 20 meV. The calculated quantum dot band gaps are parametrized for future references.

  10. L. James Rainwater and the Atomic Nuclei

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    L. James Rainwater and the Atomic Nucleus Resources with Additional Information James Rainwater Courtesy AIP Emilio Segre Visual Archives, W. F. Meggers Gallery of Nobel Laureates "During W.W. II, I [James Rainwater] worked ... [on the] Manhattan Project, mainly doing pulsed neutron spectroscopy using the small Columbia cyclotron. ... [Maria Geoppert-Mayer] shell model suggestion in 1949 was a great triumph and fitted my belief that a nuclear shell model should represent a proper approach

  11. AtomsPeace_Dec2003.qxd

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Atoms for Peace after 50 Years: The New Challenges and Opportunities December 2003 UCRL-TR-200927 This document was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor the University of California nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or

  12. Do triatomic molecules echo atomic periodicity?

    SciTech Connect (OSTI)

    Hefferlin, R. Barrow, J.

    2015-03-30

    Demonstrations of periodicity among triatomic-molecular spectroscopic constants underscore the role of the periodic law as a foundation of chemistry. The objective of this work is to prepare for another test using vibration frequencies ?{sub 1} of free, ground-state, main-group triatomic molecules. Using data from four data bases and from computation, we have collected ?{sub 1} data for molecules formed from second period atoms.

  13. Classical and quantum chaos in atomic systems

    SciTech Connect (OSTI)

    Delande, D.; Buchleitner, A. [Universite Pierre et Marie Curie, Paris (France)

    1994-12-31

    Atomic systems played a major role in the birth and growth of quantum mechanics. One central idea was to relate the well-known classical motion of the electron of a hydrogen atom--an ellipsis around the nucleus--to the experimentally observed quantization of the energy levels. This is the aim of the Bohr and Bohr-Sommerfeld models. These simple semiclassical models were unable to make any reliable prediction on the energy spectrum of the next simplest atom, helium. Because of the great success of quantum mechanics, the problem of correspondence between the classical and the quantal dynamics has not received much attention in the last 60 years. The fundamental question is (Gutzwiller, 1990). How can classical mechanics be understood as a limiting case within quantum mechanics? For systems with time-independent one-dimensional dynamics like the harmonic oscillator and the hydrogen atom, the correspondence is well understood. The restriction to such simple cases creates the erroneous impression that the classical behavior of simple systems is entirely comprehensible and easily described. During the last 20 years it has been recognized that this in not true and that a complex behavior can be obtained from simple equations of motion. This usually happens when the motion is chaotic, that is, unpredictable on a long time scale although perfectly deterministic (Henon, 1983). A major problem is that of understanding how the regular or chaotic behavior of the classical system is manifest in its quantum properties, especially in the semiclassical limit. 53 refs., 15 figs., 1 tab.

  14. First AID (Atom counting for Isotopic Determination).

    SciTech Connect (OSTI)

    Roach, J. L.; Israel, K. M.; Steiner, R. E.; Duffy, C. J.; Roench, F. R.

    2002-01-01

    Los Alamos National Laboratory (LANL) has established an in vitro bioassay monitoring program in compliance with the requirements in the Code of Federal Regulations, 10 CFR 835, Occupational Radiation Protection. One aspect of this program involves monitoring plutonium levels in at-risk workers. High-risk workers are monitored using the ultra-sensitive Therrnal Ionization Mass Spectrometry (TIMS) technique to ensure compliance with DOE standards. TIMS is used to measure atom ratios of 239Pua nd 240Puw ith respect to a tracer isotope ('Pu). These ratios are then used to calculate the amount of 239Pu and 240Pup resent. This low-level atom counting technique allows the calculation of the concentration levels of 239Pu and 240Pu in urine for at risk workers. From these concentration levels, dose assessments can be made and worker exposure levels can be monitored. Detection limits for TIMS analysis are on the order of millions of atoms, which translates to activity levels of 150 aCi 239Pua nd 500 aCi for 240Pu. pCi for Our poster presentation will discuss the ultra-sensitive, low-level analytical technique used to measure plutonium isotopes and the data verification methods used for validating isotopic measurements.

  15. The national ignition facility and atomic data

    SciTech Connect (OSTI)

    Crandall, David H.

    1998-07-08

    The National Ignition Facility (NIF) is under construction, capping over 25 years of development of the inertial confinement fusion concept by providing the facility to obtain fusion ignition in the laboratory for the first time. The NIF is a 192 beam glass laser to provide energy controlled in space and time so that a millimeter-scale capsule containing deuterium and tritium can be compressed to fusion conditions. Light transport, conversion of light in frequency, interaction of light with matter in solid and plasma forms, and diagnostics of extreme material conditions on small scale all use atomic data in preparing for use of the NIF. The NIF will provide opportunity to make measurements of atomic data in extreme physical environments related to fusion energy, nuclear weapon detonation, and astrophysics. The first laser beams of NIF should be operational in 2001 and the full facility completed at the end of 2003. NIF is to provide 1.8 megajoule of blue light on fusion targets and is intended to achieve fusion ignition by about the end of 2007. Today's inertial fusion development activities use atomic data to design and predict fusion capsule performance and in non-fusion applications to analyze radiation transport and radiation effects on matter. Conditions investigated involve radiation temperature of hundreds of eV, pressures up to gigabars and time scales of femptoseconds.

  16. The national ignition facility and atomic data

    SciTech Connect (OSTI)

    Crandall, D.H.

    1998-07-01

    The National Ignition Facility (NIF) is under construction, capping over 25 years of development of the inertial confinement fusion concept by providing the facility to obtain fusion ignition in the laboratory for the first time. The NIF is a 192 beam glass laser to provide energy controlled in space and time so that a millimeter-scale capsule containing deuterium and tritium can be compressed to fusion conditions. Light transport, conversion of light in frequency, interaction of light with matter in solid and plasma forms, and diagnostics of extreme material conditions on small scale all use atomic data in preparing for use of the NIF. The NIF will provide opportunity to make measurements of atomic data in extreme physical environments related to fusion energy, nuclear weapon detonation, and astrophysics. The first laser beams of NIF should be operational in 2001 and the full facility completed at the end of 2003. NIF is to provide 1.8 megajoule of blue light on fusion targets and is intended to achieve fusion ignition by about the end of 2007. Today{close_quote}s inertial fusion development activities use atomic data to design and predict fusion capsule performance and in non-fusion applications to analyze radiation transport and radiation effects on matter. Conditions investigated involve radiation temperature of hundreds of eV, pressures up to gigabars and time scales of femptoseconds. {copyright} {ital 1998 American Institute of Physics.}

  17. Atomic layer deposition of nanoporous biomaterials.

    SciTech Connect (OSTI)

    Narayan, R. J.; Adiga, S. P.; Pellin, M. J.; Curtiss, L. A.; Stafslien, S.; Chisholm, B.; Monteiro-Riviere, N. A.; Brigmon, R. L.; Elam, J. W.; Univ. of North Carolina; North Carolina State Univ.; Eastman Kodak Co.; North Dakota State Univ.; SRL

    2010-03-01

    Due to its chemical stability, uniform pore size, and high pore density, nanoporous alumina is being investigated for use in biosensing, drug delivery, hemodialysis, and other medical applications. In recent work, we have examined the use of atomic layer deposition for coating the surfaces of nanoporous alumina membranes. Zinc oxide coatings were deposited on nanoporous alumina membranes using atomic layer deposition. The zinc oxide-coated nanoporous alumina membranes demonstrated antimicrobial activity against Escherichia coli and Staphylococcus aureus bacteria. These results suggest that atomic layer deposition is an attractive technique for modifying the surfaces of nanoporous alumina membranes and other nanostructured biomaterials. Nanoporous alumina, also known as anodic aluminum oxide (AAO), is a nanomaterial that exhibits several unusual properties, including high pore densities, straight pores, small pore sizes, and uniform pore sizes. In 1953, Keller et al. showed that anodizing aluminum in acid electrolytes results in a thick layer of nearly cylindrical pores, which are arranged in a close-packed hexagonal cell structure. More recently, Matsuda & Fukuda demonstrated preparation of highly ordered platinum and gold nanohole arrays using a replication process. In this study, a negative structure of nanoporous alumina was initially fabricated and a positive structure of a nanoporous metal was subsequently fabricated. Over the past fifteen years, nanoporous alumina membranes have been used as templates for growth of a variety of nanostructured materials, including nanotubes, nanowires, nanorods, and nanoporous membranes.

  18. NIC atomic operation unit with caching and bandwidth mitigation

    DOE Patents [OSTI]

    Hemmert, Karl Scott; Underwood, Keith D.; Levenhagen, Michael J.

    2016-03-01

    A network interface controller atomic operation unit and a network interface control method comprising, in an atomic operation unit of a network interface controller, using a write-through cache and employing a rate-limiting functional unit.

  19. One Nanocrystal, Many Faces: Connecting the Atomic Surface Structures...

    Office of Science (SC) Website

    The atomic models are overlaid on the simulated images to illustrate atom positions. The Science When it comes to reducing the toxins released by burning gasoline, coal, or other ...

  20. General Atomics Hot Cell Facility, California, Site Fact Sheet

    Office of Legacy Management (LM)

    General Atomics Hot Cell Facility, California, Site. The U.S. Department of Energy Office ... After an Location of the General Atomics Hot Cell Facility, California, Site A hot cell is ...

  1. An Atomic-Level Understanding of Copper-Based Catalysts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    An Atomic-Level Understanding of Copper-Based Catalysts An Atomic-Level Understanding of Copper-Based Catalysts Print Thursday, 05 May 2016 12:20 Copper-based catalysts are widely ...

  2. Signals from dark atom formation in halos (Journal Article) ...

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Search Results Journal Article: Signals from dark atom formation in halos Citation Details In-Document Search Title: Signals from dark atom formation in halos ...

  3. The LANL atomic kinetics modeling effort and its application...

    Office of Scientific and Technical Information (OSTI)

    An on-line version of the codes is available at http:aphysics2.lanl.govtempweb. ATOMIC kinetics modelling code uses the atomic data for LTE or NLTE population kinetics models ...

  4. Dynamical Crystallization in the Dipole Blockade of Ultracold Atoms

    SciTech Connect (OSTI)

    Pohl, T.; Demler, E.; Lukin, M. D.

    2010-01-29

    We describe a method for controlling many-body states in extended ensembles of Rydberg atoms, forming crystalline structures during laser excitation of a frozen atomic gas. Specifically, we predict the existence of an excitation-number staircase in laser excitation of atomic ensembles into Rydberg states. It is shown that such ordered states can be selectively excited by chirped laser pulses, and, via quantum state transfer from atoms to light, be used to create crystalline photonic states.

  5. Lesson 6 - Atoms to Electricity | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 - Atoms to Electricity Lesson 6 - Atoms to Electricity Most power plants make electricity by boiling water to make steam that turns a turbine. A nuclear power plant works this way, too. At a nuclear power plant, splitting atoms produce the heat to boil the water. This lesson covers Inside the Reactor Heat Pressure Water Fission Control Fuel assemblies Control rods Coolant Pressure vessel Electricity Generation Generator Condenser Cooling tower Lesson 6 - Atoms to Electricity.pptx (9.7 MB) More

  6. SYMMETRY OF THE IBEX RIBBON OF ENHANCED ENERGETIC NEUTRAL ATOM...

    Office of Scientific and Technical Information (OSTI)

    English Subject: 79 ASTROPHYSICS, COSMOLOGY AND ASTRONOMY; ASYMMETRY; ATOMS; DETECTION; ENERGY DEPENDENCE; HELIOSPHERE; INTERSTELLAR SPACE; KEV RANGE; MAGNETIC FIELDS; PLASMA;...

  7. Atomic Layer Deposition (ALD) Preparation of Noble Metal Catalysts - Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Nuclear Security Administration | (NNSA) Explores Peaceful Uses of Nuclear Explosions Atomic Energy Commission Explores Peaceful Uses of Nuclear Explosions Nevada Test Site, NV As part of the Plowshare program seeking to develop peaceful uses for nuclear explosives, the Atomic Energy Commission conducts the Sedan test at the Nevada Test Site Programs | National Nuclear Security Administration | (NNSA)

    Takes Over Responsibility for all Atomic Energy Programs Atomic Energy

  8. DOE - Office of Legacy Management -- Gen_Atomics

    Office of Legacy Management (LM)

    General Atomics Hot Cell Facility, California, Site A Oakland Operations Office site gen_atomics_map The General Atomics Hot Cell Facility site was a research laboratory formerly operated under the DOE Oakland Operations Office, California. After remediation, the site transferred to the Office of Legacy Management in 2005. The site requires records management and stakeholder support. For more information about the General Atomics Hot Cell

  9. Gosling, The Manhattan Project: Making the Atomic Bomb | Department...

    Energy Savers [EERE]

    Operational Management History Historical Resources History Publications Gosling, The Manhattan Project: Making the Atomic Bomb Gosling, The Manhattan Project: Making...

  10. International safeguards: Accounting for nuclear materials

    SciTech Connect (OSTI)

    Fishbone, L.G.

    1988-09-28

    Nuclear safeguards applied by the International Atomic Energy Agency (IAEA) are one element of the non-proliferation regime'', the collection of measures whose aim is to forestall the spread of nuclear weapons to countries that do not already possess them. Safeguards verifications provide evidence that nuclear materials in peaceful use for nuclear-power production are properly accounted for. Though carried out in cooperation with nuclear facility operators, the verifications can provide assurance because they are designed with the capability to detect diversion, should it occur. Traditional safeguards verification measures conducted by inspectors of the IAEA include book auditing; counting and identifying containers of nuclear material; measuring nuclear material; photographic and video surveillance; and sealing. Novel approaches to achieve greater efficiency and effectiveness in safeguards verifications are under investigation as the number and complexity of nuclear facilities grow. These include the zone approach, which entails carrying out verifications for groups of facilities collectively, and randomization approach, which entails carrying out entire inspection visits some fraction of the time on a random basis. Both approaches show promise in particular situations, but, like traditional measures, must be tested to ensure their practical utility. These approaches are covered on this report. 15 refs., 16 figs., 3 tabs.

  11. Tritium handling experience at Atomic Energy of Canada Limited

    SciTech Connect (OSTI)

    Suppiah, S.; McCrimmon, K.; Lalonde, S.; Ryland, D.; Boniface, H.; Muirhead, C.; Castillo, I.

    2015-03-15

    Canada has been a leader in tritium handling technologies as a result of the successful CANDU reactor technology used for power production. Over the last 50 to 60 years, capabilities have been established in tritium handling and tritium management in CANDU stations, tritium removal processes for heavy and light water, tritium measurement and monitoring, and understanding the effects of tritium on the environment. This paper outlines details of tritium-related work currently being carried out at Atomic Energy of Canada Limited (AECL). It concerns the CECE (Combined Electrolysis and Catalytic Exchange) process for detritiation, tritium-compatible electrolysers, tritium permeation studies, and tritium powered batteries. It is worth noting that AECL offers a Tritium Safe-Handling Course to national and international participants, the course is a mixture of classroom sessions and hands-on practical exercises. The expertise and facilities available at AECL is ready to address technological needs of nuclear fusion and next-generation nuclear fission reactors related to tritium handling and related issues.

  12. President Roosevelt Approves Production of Atomic Bomb | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) Approves Production of Atomic Bomb President Roosevelt Approves Production of Atomic Bomb Washington, DC President Roosevelt approves production of the atomic bomb following receipt of a National Academy of Sciences report determining that a bomb is feasible

  13. Light pulse analysis with a multi-state atom interferometer

    SciTech Connect (OSTI)

    Herrera, I.; Lombardi, P.; Schfer, F.; Petrovic, J.; Cataliotti, F. S.

    2014-12-04

    We present a controllable multi-state cold-atom interferometer that is easy-to-use and fully merged on an atom chip. We demonstrate its applications as a sensor of the fields whose interactions with atoms are state-dependent.

  14. Method of performing MRI with an atomic magnetometer

    DOE Patents [OSTI]

    Savukov, Igor Mykhaylovich; Matlashov, Andrei Nikolaevich; Espy, Michelle A.; Volegov, Petr Lvovich; Kraus, Jr., Robert Henry; Zotev, Vadim Sergeyevich

    2012-11-06

    A method and apparatus are provided for performing an in-situ magnetic resonance imaging of an object. The method includes the steps of providing an atomic magnetometer, coupling a magnetic field generated by magnetically resonating samples of the object through a flux transformer to the atomic magnetometer and measuring a magnetic resonance of the atomic magnetometer.

  15. Method of performing MRI with an atomic magnetometer

    DOE Patents [OSTI]

    Savukov, Igor Mykhaylovich; Matlashov, Andrei Nikolaevich; Espy, Michelle A; Volegov, Petr Lvovich; Kraus, Jr., Robert Henry; Zotev, Vadim Sergeyevich

    2013-08-27

    A method and apparatus are provided for performing an in-situ magnetic resonance imaging of an object. The method includes the steps of providing an atomic magnetometer, coupling a magnetic field generated by magnetically resonating samples of the object through a flux transformer to the atomic magnetometer and measuring a magnetic resonance of the atomic magnetometer.

  16. Determination of Atomic Data Pertinent to the Fusion Energy Program

    SciTech Connect (OSTI)

    Reader, J.

    2013-06-11

    We summarize progress that has been made on the determination of atomic data pertinent to the fusion energy program. Work is reported on the identification of spectral lines of impurity ions, spectroscopic data assessment and compilations, expansion and upgrade of the NIST atomic databases, collision and spectroscopy experiments with highly charged ions on EBIT, and atomic structure calculations and modeling of plasma spectra.

  17. GEA International Geothermal Energy Showcase

    Broader source: Energy.gov [DOE]

    What are the building blocks for successful geothermal projects? Find out March 17, 2016 at the Geothermal Energy Association's 2016 U.S. and International Geothermal Energy Showcase at the Ronald...

  18. Denver International Airport Photovoltaic System

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Denver International Airport (DIA) features a 2-megawatt (MW) photovoltaic (PV) system. DIA also hosts to a second 1.6-MW system. Denver is a Solar America City.

  19. International Natural Gas Workshop Presnetations

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Session 3: Asian Natural Gas Outlook Asian Natural Gas: A Softer Market is coming Robert Smith, FGE Dubai PDF Session 4: LNG Exports and the Future International Natural Gas Market ...

  20. international | OpenEI Community

    Open Energy Info (EERE)

    by Graham7781(2017) Super contributor 14 April, 2014 - 09:48 National Day of Civic Hacking code community data Event hacking international national OpenEI The National Day of...

  1. Internal dosimetry technical basis manual

    SciTech Connect (OSTI)

    Not Available

    1990-12-20

    The internal dosimetry program at the Savannah River Site (SRS) consists of radiation protection programs and activities used to detect and evaluate intakes of radioactive material by radiation workers. Examples of such programs are: air monitoring; surface contamination monitoring; personal contamination surveys; radiobioassay; and dose assessment. The objectives of the internal dosimetry program are to demonstrate that the workplace is under control and that workers are not being exposed to radioactive material, and to detect and assess inadvertent intakes in the workplace. The Savannah River Site Internal Dosimetry Technical Basis Manual (TBM) is intended to provide a technical and philosophical discussion of the radiobioassay and dose assessment aspects of the internal dosimetry program. Detailed information on air, surface, and personal contamination surveillance programs is not given in this manual except for how these programs interface with routine and special bioassay programs.

  2. SBD International | Open Energy Information

    Open Energy Info (EERE)

    International Place: Ft. Lauderdale, Florida Zip: 33309 Product: SBD has proposed an 18MW thin film PV fab for Florida and plans to develop small-scale projects in the Caribbean...

  3. Large-angle illumination STEM: Toward three-dimensional atom-by-atom imaging

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ishikawa, Ryo; Lupini, Andrew R.; Hinuma, Yoyo; Pennycook, Stephen

    2014-11-26

    To completely understand and control materials and their properties, it is of critical importance to determine their atomic structures in all three dimensions. Recent revolutionary advances in electron optics – the inventions of geometric and chromatic aberration correctors as well as electron source monochromators – have provided fertile ground for performing optical depth sectioning at atomic-scale dimensions. In this study we theoretically demonstrate the imaging of top/sub-surface atomic structures and identify the depth of single dopants, single vacancies and the other point defects within materials by large-angle illumination scanning transmission electron microscopy (LAI-STEM). The proposed method also allows us tomore » measure specimen properties such as thickness or three-dimensional surface morphology using observations from a single crystallographic orientation.« less

  4. International Portfolio | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Emerging Technologies » International Portfolio International Portfolio U.S.-China Partnership U.S.-China Partnership Through the CERC-Building Energy Efficiency consortium, the U.S. and China are researching building energy efficiency technologies and practices that will signficantly reduce building energy consumption in both countries. U.S.-India Partnership U.S.-India Partnership Together, the U.S. and India are conducting collaborative research and development that results in measurable and

  5. Computerized international geothermal information systems

    SciTech Connect (OSTI)

    Phillips, S.L.; Lawrence, J.D.; Lepman, S.R.

    1980-03-01

    The computerized international geothermal energy information system is reviewed. The review covers establishment of the Italy - United States linked data centers by the NATO Committee on Challenges of Modern Society, through a bilateral agreement, and up to the present time. The result of the information exchange project is given as the bibliographic and numerical data available from the data centers. Recommendations for the exchange of computerized geothermal information at the international level are discussed.

  6. Atomizing apparatus for making polymer and metal powders and whiskers

    DOE Patents [OSTI]

    Otaigbe, Joshua U.; McAvoy, Jon M.; Anderson, Iver E.; Ting, Jason; Mi, Jia; Terpstra, Robert

    2003-03-18

    Method for making polymer particulates, such as spherical powder and whiskers, by melting a polymer material under conditions to avoid thermal degradation of the polymer material, atomizing the melt using gas jet means in a manner to form atomized droplets, and cooling the droplets to form polymer particulates, which are collected for further processing. Atomization parameters can be controlled to produce polymer particulates with controlled particle shape, particle size, and particle size distribution. For example, atomization parameters can be controlled to produce spherical polymer powders, polymer whiskers, and combinations of spherical powders and whiskers. Atomizing apparatus also is provided for atoomizing polymer and metallic materials.

  7. Polarization-dependent atomic dipole traps behind a circular aperture for neutral-atom quantum computing

    SciTech Connect (OSTI)

    Gillen-Christandl, Katharina; Copsey, Bert D.

    2011-02-15

    The neutral-atom quantum computing community has successfully implemented almost all necessary steps for constructing a neutral-atom quantum computer. We present computational results of a study aimed at solving the remaining problem of creating a quantum memory with individually addressable sites for quantum computing. The basis of this quantum memory is the diffraction pattern formed by laser light incident on a circular aperture. Very close to the aperture, the diffraction pattern has localized bright and dark spots that can serve as red-detuned or blue-detuned atomic dipole traps. These traps are suitable for quantum computing even for moderate laser powers. In particular, for moderate laser intensities ({approx}100 W/cm{sup 2}) and comparatively small detunings ({approx}1000-10 000 linewidths), trap depths of {approx}1 mK and trap frequencies of several to tens of kilohertz are achieved. Our results indicate that these dipole traps can be moved by tilting the incident laser beams without significantly changing the trap properties. We also explored the polarization dependence of these dipole traps. We developed a code that calculates the trapping potential energy for any magnetic substate of any hyperfine ground state of any alkali-metal atom for any laser detuning much smaller than the fine-structure splitting for any given electric field distribution. We describe details of our calculations and include a summary of different notations and conventions for the reduced matrix element and how to convert it to SI units. We applied this code to these traps and found a method for bringing two traps together and apart controllably without expelling the atoms from the trap and without significant tunneling probability between the traps. This approach can be scaled up to a two-dimensional array of many pinholes, forming a quantum memory with single-site addressability, in which pairs of atoms can be brought together and apart for two-qubit gates for quantum computing.

  8. A Green's function quantum average atom model

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Starrett, Charles Edward

    2015-05-21

    A quantum average atom model is reformulated using Green's functions. This allows integrals along the real energy axis to be deformed into the complex plane. The advantage being that sharp features such as resonances and bound states are broadened by a Lorentzian with a half-width chosen for numerical convenience. An implementation of this method therefore avoids numerically challenging resonance tracking and the search for weakly bound states, without changing the physical content or results of the model. A straightforward implementation results in up to a factor of 5 speed-up relative to an optimized orbital based code.

  9. Microwave meta-atom enhanced spintronic rectification

    SciTech Connect (OSTI)

    Gou, Peng; Xi, Fuchun; Qian, Qinbai; Xu, Jie; Gui, Y. S.; Hu, C.-M.; An, Zhenghua

    2015-04-06

    An artificial meta-atom (MA), or alternatively, a plasmonic antenna, has been demonstrated to significantly enhance the microwave spin rectifying photovoltage by more than two orders in magnitude (∼280) in the ferromagnetic resonance regime. The large enhancement is attributed to the unique structure of the MA which magnifies both microwave electric (∼5) and magnetic (∼56) fields in the same near-field spatial region. Our work develops the interdisciplinary direction with artificial and natural magnetism and may find promising applications in high-frequency or opto-spintronic devices and wireless microwave energy harvesting.

  10. Method for producing uranium atomic beam source

    DOE Patents [OSTI]

    Krikorian, Oscar H.

    1976-06-15

    A method for producing a beam of neutral uranium atoms is obtained by vaporizing uranium from a compound UM.sub.x heated to produce U vapor from an M boat or from some other suitable refractory container such as a tungsten boat, where M is a metal whose vapor pressure is negligible compared to that of uranium at the vaporization temperature. The compound, for example, may be the uranium-rhenium compound, URe.sub.2. An evaporation rate in excess of about 10 times that of conventional uranium beam sources is produced.

  11. Electric quadrupole transition probabilities for atomic lithium

    SciTech Connect (OSTI)

    elik, Gltekin; Gke, Yasin; Y?ld?z, Murat

    2014-05-15

    Electric quadrupole transition probabilities for atomic lithium have been calculated using the weakest bound electron potential model theory (WBEPMT). We have employed numerical non-relativistic HartreeFock wavefunctions for expectation values of radii and the necessary energy values have been taken from the compilation at NIST. The results obtained with the present method agree very well with the Coulomb approximation results given by Caves (1975). Moreover, electric quadrupole transition probability values not existing in the literature for some highly excited levels have been obtained using the WBEPMT.

  12. International Commitments Primer | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Commitments » International Commitments Primer International Commitments Primer Overview of International Commitment Process DOE pursues a variety of science and technology goals with other governments and international organizations, like sharing scientific data, cooperating research and development of common interest, and sharing scientific expertise, methodologies, and facilities, all of which motivate establishing relationships through agreements with foreign counterparts.

  13. The Atomic Safety and Licensing Board Panel

    SciTech Connect (OSTI)

    1998-03-01

    Through the Atomic Energy Act, Congress made is possible for the public to get a full and fair hearing on civilian nuclear matters. Individuals who are directly affected by any licensing action involving a facility producing or utilizing nuclear materials may participate in a formal hearing, on the record, before independent judges on the Atomic Safety and Licensing Board Panel (ASLBP or Panel). Frequently, in deciding whether a license, permit, amendment, or extension should be granted to a particular applicant, the Panel members must be more than mere umpires. If appropriate, they are authorized to go beyond the issues the parties place before them in order to identify, explore, and resolve significant questions involving threats to the public health and safety that come to a board`s attention during the proceedings. This brochure explains the purpose of the panel. Also addressed are: type of hearing handled; method of public participation; formality of hearings; high-level waste; other panel responsibilities and litigation technology.

  14. New directions in optical atomic spectrometry

    SciTech Connect (OSTI)

    de Galan, L.

    1986-05-01

    Soon after its invention a successful method of analysis goes through a phase of rapid growth and exaggerated expectations before it recedes to a more balanced position in the analytical domain. Flame and furnace atomic absorption spectrometry (AAS) and inductively coupled plasma-atomic emission spectrometry (ICP-AES), as we know them now, were introduced 20 to 30 years ago, developed into commercial instruments within a decade after their first description in the scientific literature, and have now reached a state of developmental equilibrium. It is undeniable that these techniques have continued to develop, but recent advances have been largely technical and cosmetic. The emphasis on automation and software has made life much easier and has significantly reduced the demand for manpower, but it has not enlarged the analytical scope of the techniques. Many initial promises have been fulfilled, but some shortcomings persist even today. At this point it would be easy to formulate the ideal method that determines all elements from the sub-parts-per-billion level to the 100% level, simultaneously, with high precision and accuracy, and at minimal cost. Clearly, no single method can possibly match such unrealistic expectations. In this article the author has, therefore, chosen the more modest approach of identifying some weak points in available technology and analyzing possible remedies. In several cases current developments are reviewed, and novel instruments proposed in the literature are evaluated. In other cases, the problems have hardly been addressed and thus may pose a challenge for future research. 10 references, 6 tables.

  15. Low energy neutral atoms from the heliosheath

    SciTech Connect (OSTI)

    Fuselier, S. A.; Allegrini, F.; Dayeh, M. A.; Desai, M.; Lewis, W.; Livadiotis, G.; McComas, D. J. E-mail: fallegrini@swri.edu E-mail: mdesai@swri.edu E-mail: george.livadiotis@swri.org; and others

    2014-04-01

    In the heliosheath beyond the termination shock, low energy (<0.5 keV) neutral atoms are created by charge exchange with interstellar neutrals. Detecting these neutrals from Earth's orbit is difficult because their flux is reduced substantially by ionization losses as they propagate from about 100 to 1 AU and because there are a variety of other signals and backgrounds that compete with this weak signal. Observations from IBEX-Lo and -Hi from two opposing vantage points in Earth's orbit established a lower energy limit of about 0.1 keV on measurements of energetic neutral atoms (ENAs) from the heliosphere and the form of the energy spectrum from about 0.1 to 6 keV in two directions in the sky. Below 0.1 keV, the detailed ENA spectrum is not known, and IBEX provides only upper limits on the fluxes. However, using some assumptions and taking constraints on the spectrum into account, we find indications that the spectrum turns over at an energy between 0.1 and 0.2 keV.

  16. international engagement | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    engagement International Engagement NNSA engages the international community by working with more than 60 foreign governments and 10 international organizations, plus several regional organizations, to improve nuclear emergency management systems worldwide. It is providing direct emergency management assistance to the

  17. Solar Power International | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar Power International Solar Power International Addthis 1 of 5 More than 15,000 solar energy professionals from 75 countries were on hand at Solar Power International (SPI) in ...

  18. Office of International Affairs | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages

    International Affairs Search Search form Search Office of International Affairs Office of International Affairs Services Initiatives Initiatives Home Climate Action Plan Clean Energy Ministerial DOC-DOE Joint Trade Mission to China Energy and Climate Partnership of the Americas International Commitments International Commitments Home Primer Glossary & Acronyms International Energy Agency Turkey Near-Zero Zone U.S.-Africa Energy Ministerial U.S.-Canada Clean Energy Dialogue (CED) U.S.-China

  19. Solatube International Inc | Open Energy Information

    Open Energy Info (EERE)

    International Inc Jump to: navigation, search Name: Solatube International Inc Place: Vista, California Zip: 92081-7652 Sector: Buildings Product: California based maker of...

  20. Foundation for International Environmental Law and Development...

    Open Energy Info (EERE)

    long term. We help community groups, advise NGOs, and train government officials in international negotiations. Research on international law, policy and national practice...

  1. GP Batteries International Limited | Open Energy Information

    Open Energy Info (EERE)

    International Limited is principally engaged in the development, manufacture and marketing of batteries and battery-related products. References: GP Batteries International...

  2. The ITER Project: International Collaboration to Demonstrate...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The ITER Project: International Collaboration to Demonstrate Nuclear Fusion American Fusion News Category: U.S. ITER Link: The ITER Project: International Collaboration to ...

  3. International Linear Collider Technical Design Report - Volume...

    Office of Scientific and Technical Information (OSTI)

    International Linear Collider Technical Design Report - Volume 2: Physics Citation Details In-Document Search Title: International Linear Collider Technical Design Report - Volume ...

  4. 2nd International Hydrogen Infrastructure Challenges Webinar...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Presentation slides from the Fuel Cell Technologies Office webinar "2nd International Hydrogen Infrastructure Challenges Webinar" held on March 10, 2015. 2nd International Hydrogen ...

  5. Solar Energy International | Open Energy Information

    Open Energy Info (EERE)

    International Jump to: navigation, search Name: Solar Energy International Address: 76 S. 2nd St. Carbondale, CO 81623 Place: Carbondale, Colorado Zip: 81623 Website:...

  6. Solar International Management Inc | Open Energy Information

    Open Energy Info (EERE)

    International Management Inc Jump to: navigation, search Name: Solar International Management Inc Place: Washington,DC, Washington, DC Zip: 20006 Sector: Solar Product: Manager of...

  7. Affiliated International Management (AIM) | Open Energy Information

    Open Energy Info (EERE)

    Affiliated International Management (AIM) Jump to: navigation, search Name: Affiliated International Management (AIM) Place: Newport Beach, CA Zip: 92658 Coordinates: 33.6392245,...

  8. International Symposium For Next Generation Infrastructure

    Broader source: Energy.gov [DOE]

    The International Symposium for Next Generation Infrastructure is designed to support the rapidly expanding international research community seeking to understand the interactions between...

  9. Weather Services International Corporation WSI | Open Energy...

    Open Energy Info (EERE)

    Weather Services International Corporation WSI Jump to: navigation, search Name: Weather Services International Corporation (WSI) Place: Andover, Massachusetts Zip: 1810 Product:...

  10. AVTA: Hydrogen Internal Combustion Engine Vehicle Specifications...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydrogen Internal Combustion Engine Vehicle Specifications and Test Procedures AVTA: Hydrogen Internal Combustion Engine Vehicle Specifications and Test Procedures HICEV Technical ...

  11. Partech International (France) | Open Energy Information

    Open Energy Info (EERE)

    France) Jump to: navigation, search Logo: Partech International (France) Name: Partech International (France) Address: 12 rue de Penthivre Place: Paris, France Zip: 75008...

  12. Intern NTE 1 Year- Student Trainee (Laborer)

    Broader source: Energy.gov [DOE]

    The purpose of the Pathways Intern Employment Program is to provide the intern with exposure to public service, enhance educational experience, and support educational goals. The program is...

  13. Beijing Haohua Rivers International Water Engineering Consulting...

    Open Energy Info (EERE)

    Haohua Rivers International Water Engineering Consulting Co Ltd Jump to: navigation, search Name: Beijing Haohua Rivers International Water Engineering Consulting Co.Ltd. Place:...

  14. Targray Technology International Inc | Open Energy Information

    Open Energy Info (EERE)

    Targray Technology International Inc Jump to: navigation, search Name: Targray Technology International Inc. Place: Kirkland QC, Quebec, Canada Zip: H9J 3Z4 Sector: Solar Product:...

  15. Webinar August 30: International Hydrogen Infrastructure Update...

    Energy Savers [EERE]

    Webinar August 30: International Hydrogen Infrastructure Update Webinar August 30: International Hydrogen Infrastructure Update August 23, 2016 - 2:07pm Addthis The Energy ...

  16. Viresco International Capital Management | Open Energy Information

    Open Energy Info (EERE)

    International Capital Management Jump to: navigation, search Name: Viresco International Capital Management Place: San Diego, California Zip: 92130 Product: San Diego-based hedge...

  17. Beijing Capital International Airport | Open Energy Information

    Open Energy Info (EERE)

    International Airport Jump to: navigation, search Name: Beijing Capital International Airport Place: Beijing, Beijing Municipality, China Zip: 100621 Product: Beijing Capital...

  18. International Hydropower Association | Open Energy Information

    Open Energy Info (EERE)

    International Hydropower Association Place: United Kingdom Zip: SM1 4JH Sector: Hydro Product: The International Hydropower Association is a non-governmental mutual association of...

  19. Green Gas International | Open Energy Information

    Open Energy Info (EERE)

    International Jump to: navigation, search Name: Green Gas International Place: Richmond upon Thames, United Kingdom Zip: TW10 6UW Product: The company establishes coal mine,...

  20. Free Energy International Canada | Open Energy Information

    Open Energy Info (EERE)

    International Canada Jump to: navigation, search Name: Free Energy International (Canada) Place: Richmond, British Columbia, Canada Sector: Geothermal energy, Solar Product:...

  1. EVI Electric Vehicles International | Open Energy Information

    Open Energy Info (EERE)

    EVI Electric Vehicles International Jump to: navigation, search Name: EVI (Electric Vehicles International) Place: Stockton, California Product: California-based Electric Vehicle...

  2. Nuclear Nonproliferation, International Safeguards and Nuclear...

    Office of Scientific and Technical Information (OSTI)

    Nuclear Nonproliferation, International Safeguards and Nuclear Security in the Middle East Citation Details In-Document Search Title: Nuclear Nonproliferation, International ...

  3. XOROX Energy International Group | Open Energy Information

    Open Energy Info (EERE)

    XOROX Energy International Group Jump to: navigation, search Name: XOROX Energy International Group Place: Heidelberg, Baden-Wrttemberg, Germany Zip: 69126 Sector: Renewable...

  4. International Nuclear Energy Policy and Cooperation

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Office of International Nuclear Energy Policy and Cooperation (INEPC) collaborates with international partners to support the safe, secure, and peaceful use of nuclear energy. It works both...

  5. Improving Data Mobility & Management for International Cosmology...

    Office of Scientific and Technical Information (OSTI)

    Improving Data Mobility & Management for International Cosmology Citation Details In-Document Search Title: Improving Data Mobility & Management for International Cosmology In February ...

  6. Office of International Affairs Organization Chart | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of International Affairs Organization Chart Office of International Affairs Organization Chart PDF icon IA Org Chart Updated June 2014 More Documents & Publications PI ...

  7. Renewable Resources International RRI | Open Energy Information

    Open Energy Info (EERE)

    International RRI Jump to: navigation, search Name: Renewable Resources International (RRI) Place: North Carolina Product: A group of investors which owns the North Carolina...

  8. International Centre for Trade and Sustainable Development |...

    Open Energy Info (EERE)

    Development Jump to: navigation, search Name: International Centre for Trade and Sustainable Development Address: International Environment House 2 Chemin de Balexert 7-9...

  9. Carbon Storage Atlas, Employee Newsletter Earn International...

    Broader source: Energy.gov (indexed) [DOE]

    internal employee newsletter, inTouch, earned 2013 National Association of Government Communicators awards. NETL's Carbon Storage Atlas IV and FE's internal employee newsletter, ...

  10. International Framework for Nuclear Energy Cooperation (IFNEC...

    Office of Environmental Management (EM)

    International Framework for Nuclear Energy Cooperation (IFNEC) Expert meetings in Romania May 28, 2014 - 12:37pm Addthis International Framework for Nuclear Energy Cooperation ...

  11. SF 6432-IN International Commercial Transactions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IN (042015) SECTION II STANDARD TERMS AND CONDITIONS FOR INTERNATIONAL COMMERCIAL ... CONDITIONS Control : SF 6432-IN Title: Standard Terms & Conditions for International ...

  12. CSC/NREL Interns | Open Energy Information

    Open Energy Info (EERE)

    CSCNREL Interns < CSC Jump to: navigation, search Geothermal Case Study Challenge Geothermal CSC About Judging Schedule Areas How To Sign Up Connect NREL Interns Team Info School:...

  13. International Market Opportunities in Bioenergy: Leveraging U...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Market Opportunities in Bioenergy: Leveraging U.S. Government Resources Breakout Session 3C-Fostering Technology Adoption III: International Market Opportunities in ...

  14. Energy Vision International Florida | Open Energy Information

    Open Energy Info (EERE)

    Vision International Florida Jump to: navigation, search Name: Energy Vision International Florida Place: Florida, California Sector: Geothermal energy, Services Product: Provides...

  15. International Coastal Biofuels | Open Energy Information

    Open Energy Info (EERE)

    Coastal Biofuels Jump to: navigation, search Name: International Coastal Biofuels Place: Tazewell, Virginia Zip: 24651 Sector: Biofuels Product: International Coastal Biofuels is a...

  16. Raven Biofuels International Corporation | Open Energy Information

    Open Energy Info (EERE)

    Biofuels International Corporation Jump to: navigation, search Name: Raven Biofuels International Corporation Place: Paramus, New Jersey Zip: 07652-1236 Sector: Biofuels Product:...

  17. Standardization of Transport Properties Measurements: Internal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standardization of Transport Properties Measurements: Internal Energy Agency (IEA-AMT) Annex on Thermoelectric International Round-Robin on Transport Properties of Bismuth ...

  18. International safeguards recommendations for the Indian advanced...

    Office of Scientific and Technical Information (OSTI)

    International safeguards recommendations for the Indian advanced heavy water reactor (AHWR) Citation Details In-Document Search Title: International safeguards recommendations for ...

  19. Philadelphia International Airport Apron Lighting: LED System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Philadelphia International Airport Apron Lighting: LED System Performance in a Trial Installation Philadelphia International Airport Apron Lighting: LED System Performance in a ...

  20. Luz International Ltd | Open Energy Information

    Open Energy Info (EERE)

    International Ltd Jump to: navigation, search Name: Luz International Ltd Place: Israel Sector: Solar Product: Developer of the Mojave Desert SEGS solar thermal plants, which went...