National Library of Energy BETA

Sample records for noncore customers refineries

  1. Refinery Integration

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    per 112014 MYPP: "The market potential of bio-oils as a feedstock for petroleum refineries is largely unknown. There is a need to gather information to understand the...

  2. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    refinery as of January 1, 2006 Tables 1 Number and Capacity of Operable Petroleum Refineries by PAD District and State as of January 1, 2006 PDF 2 Production Capacity of...

  3. Refinery, petrochemical plant injuries decline

    SciTech Connect (OSTI)

    Not Available

    1994-07-25

    The National Petroleum Refiners Association (NPRA) reports a 7% reduction in workplace injury and illness incidence rates for refineries in 1993, and a 21% decrease for petrochemical plants. The report summarizes data from 135 of the 162 US member refineries, and 117 of the 172 US member petrochemical plants. This paper summarizes the report findings.

  4. Refinery Energy Profiling Procedure 

    E-Print Network [OSTI]

    Maier, R. W.

    1981-01-01

    PLANT ENERGY US.E) 6 \\ , \\ \\ \\ \\ 5 .... 4 ~ .... en CJ z > c( 3 en > CJ a: w z W 2 r r---o 1 STACK TEMPERATURE FOR ALL HEATERS (OF) fi49 ESL-IE-81-04-110 Proceedings from the Third Industrial Energy Technology Conference... stream_source_info ESL-IE-81-04-110.pdf.txt stream_content_type text/plain stream_size 15712 Content-Encoding ISO-8859-1 stream_name ESL-IE-81-04-110.pdf.txt Content-Type text/plain; charset=ISO-8859-1 REFINERY ENERGY...

  5. Storage tracking refinery trends

    SciTech Connect (OSTI)

    Saunders, J.

    1996-05-01

    Regulatory and marketplace shakeups have made the refining and petrochemical industries highly competitive. The fight to survive has forced refinery consolidations, upgrades and companywide restructurings. Bulk liquid storage terminals are following suit. This should generate a flurry of engineering and construction by the latter part of 1997. A growing petrochemical industry translates into rising storage needs. Industry followers forecasted flat petrochemical growth in 1996 due to excessive expansion in 1994 and 1995. But expansion is expected to continue throughout this year on the strength of several products.

  6. Refinery Fuel Balancing with Cogeneration 

    E-Print Network [OSTI]

    Passman, K. W.; Taylor, R. I.; Williams, D. E.; Emanuel, D.

    1990-01-01

    Placid is starting up a 7.6 MW cogeneration system in their Port Allen, Louisiana Refinery. The project was justified on efficiency improvement, reduced flaring and improved power reliability. The project was implemented on a fast track schedule...

  7. Encon Motivation in European Refineries 

    E-Print Network [OSTI]

    Gambera, S.; Lockett, W., Jr.

    1982-01-01

    for maintaining a continuing program. Energy utilization efficiency in Esso Europe's refineries improved about 16% in the mid 70's, due primarily to Encon motivation. Experience has since demonstrated that additional improvements can be achieved through...

  8. Motiva Enterprises Refinery Expansion Groundbreaking | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Arthur refinery, which opened here in 1903. As America's need for energy expanded as our demand for oil and gas grew in tandem with our economy and our mobility this refinery...

  9. Hydrocracking options for today's refinery

    SciTech Connect (OSTI)

    Reno, M.E.; Pedersen, B.S.; Olson, R.K. (UOP, Des Plaines, IL (US))

    1989-01-01

    Over the 30-year history of hydrocracking, the role of the process has changed to meet shifting product demands. Originally applied as a naphtha producer, hydrocracking is now a chief source of high quality middle distillates and hydrogen-rich VGO. Because of the wide range of possible hydrocracking feedstocks and operating modes, refiners can apply hydrocracking to many different processing schemes to optimize refinery flexibility and profitability. This paper describes the overall refinery product slate for each of four hydrocracking schemes. All four hydrocracking examples are compared to the product slate of an FCC-based refinery processing Light Arabian Crude. As the examples show, hydrocracking technology enhances the ability to make high quality distillate, either as a complement to existing FCC capacity, or as a stand-alone conversion unit.

  10. Biocrude suitability for petroleum refineries

    SciTech Connect (OSTI)

    Schmalzer, D.K.; Gaines, L.L.; Herzenberg, C.L.; Snider, M.A.

    1988-06-01

    Technologies are now being developed that could produce crude oil from biomass, making available an alternative fuel source as petroleum supplies dwindle and prices rise. If the existing infrastructure for transporting and refining petroleum could be used for biocrude, the transition from petroleum would be smoother and less costly. This report examines the suitability of the existing systems for transporting biocrude and processing it into gasoline. Available biomass production areas were identified and potential production was estimated. Production areas with the potential to supply conversion plants were then matched with transportation paths and refinery locations to minimize transportation costs. Technical requirements for treating biocrude were examined, based on its expected chemical composition and physical properties, and compared to existing refinery equipment and capacity. Environmental constraints were taken into account at each step. Although biomass-derived oils could be transported to refineries the existing refinery equipment is not optimal for upgrading these oils to a gasoline-grade product. Furthermore, existing hydrogen production capacity is grossly inadequate for upgrading substantial volumes of biocrude. Partial or total upgrading at conversion facilities or regional upgrading facilities is discussed briefly, but in-depth evaluation of such options is beyond the scope of this study. 82 refs., 26 figs., 35 tabs.

  11. Opportunities for Biorenewables in Petroleum Refineries

    SciTech Connect (OSTI)

    Holmgren, Jennifer; Marinangelli, Richard; Marker, Terry; McCall, Michael; Petri, John; Czernik, Stefan; Elliott, Douglas C.; Shonnard, David

    2007-02-01

    A presentation by UOP based on collaborative work from FY05 using some results from PNNL for upgrading biomass pyrolysis oil to petroleum refinery feedstock

  12. Opportunities for Biorenewables in Petroleum Refineries

    SciTech Connect (OSTI)

    Holmgren, Jennifer; Arena, Blaise; Marinangelli, Richard; McCall, Michael; Marker, Terry; Petri, John; Czernik, Stefan; Elliott, Douglas C.; Shonnard, David

    2006-10-11

    a summary of our collaborative 2005 project “Opportunities for Biorenewables in Petroleum Refineries” at the Rio Oil and Gas Conference this September.

  13. Inorganic Membranes for Refinery Gas Separations

    SciTech Connect (OSTI)

    2009-02-01

    This factsheet describes a research project whose goal is to push the performance limits of inorganic membranes for large-scale gas separations in refinery applications.

  14. Fuel-Flexible Combustion System for Refinery and Chemical Plant...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Flexible Combustion System for Refinery and Chemical Plant Process Heaters - Fact Sheet 2014 Fuel-Flexible Combustion System for Refinery and Chemical Plant Process Heaters - Fact...

  15. Refinery burner simulation design architecture summary.

    SciTech Connect (OSTI)

    Pollock, Guylaine M.; McDonald, Michael James; Halbgewachs, Ronald D.

    2011-10-01

    This report describes the architectural design for a high fidelity simulation of a refinery and refinery burner, including demonstrations of impacts to the refinery if errors occur during the refinery process. The refinery burner model and simulation are a part of the capabilities within the Sandia National Laboratories Virtual Control System Environment (VCSE). Three components comprise the simulation: HMIs developed with commercial SCADA software, a PLC controller, and visualization software. All of these components run on different machines. This design, documented after the simulation development, incorporates aspects not traditionally seen in an architectural design, but that were utilized in this particular demonstration development. Key to the success of this model development and presented in this report are the concepts of the multiple aspects of model design and development that must be considered to capture the necessary model representation fidelity of the physical systems.

  16. Customer Comments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Improvement (CBPI) Customer Forum Energy Imbalance Market Generator Interconnection Reform Implementation Network Integration Transmission Service (NT Service) Network Open...

  17. Customer Comments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forum Energy Imbalance Market Meetings Customer Comments Generator Interconnection Reform Implementation Network Integration Transmission Service (NT Service) Network Open...

  18. Former Soviet refineries face modernization, restructuring

    SciTech Connect (OSTI)

    Not Available

    1993-11-29

    A massive modernization and restructuring program is under way in the refining sector of Russia and other former Soviet republics. Economic reforms and resulting economic dislocation following the collapse of the Soviet Union has left refineries in the region grappling with a steep decline and changes in product demand. At the same time, rising oil prices and an aging, dilapidated infrastructure promise a massive shakeout. Even as many refineries in the former Soviet Union (FSU) face possible closure because they are running at a fraction of capacity, a host of revamps, expansions, and grass roots refineries are planned or under way. The paper discusses plans.

  19. Customer Comments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sales Reports BP-16 Customer Comments The BP-16 Rate Case concluded effective July 23, 2015. Generation Inputs Comment Period for October 31, 2014 Portland General Electric...

  20. From the Woods to the Refinery

    Broader source: Energy.gov [DOE]

    Breakout Session 2D—Building Market Confidence and Understanding II: Carbon Accounting and Woody Biofuels From the Woods to the Refinery Stephen S. Kelley, Principal and Department Head, Department of Forest Biomaterials, North Carolina State University

  1. Dutch refinery nears completion of major renovation

    SciTech Connect (OSTI)

    Rhodes, A.K.

    1997-03-17

    Shell Nederland Raffinaderij B.V. has completed construction of a major upgrade at its refinery in Pernis, The Netherlands. The project, called PER+, centers around the addition of Shell Gasification Hydrogen Process (SGHP) and hydrocracking units. The expansion will increase the complexity of Shell`s Dutch refinery and enable it to convert low-value streams to useful products such as cleaner-burning transportation fuels, hydrogen, and electricity. PER+ is a prime example of the kind of innovative planning necessary for European refineries to stay competitive in a tough market. The project reached mechanical completion early this year, and is scheduled to start up in May. The paper describes the refinery, project objectives, process options, the SGHP process, soot ash removal, syngas treatment, power and hydrogen production, environmental issues, and construction.

  2. ,"U.S. Refinery Net Production"

    U.S. Energy Information Administration (EIA) Indexed Site

    586-8800",,,"10272015 12:31:05 PM" "Back to Contents","Data 1: U.S. Refinery Net Production" "Sourcekey","MTTRXNUS1","MLPRXNUS1","METRXNUS1","MENRXNUS1","MEYRXNUS1","...

  3. Upgrade Your Refinery for Energy Conservation 

    E-Print Network [OSTI]

    Johnnie, D. H., Jr.; Klooster, H. J.

    1983-01-01

    Upgrading existing refineries for efficient energy utilization imposes strict restraints upon design engineers. Present and future production requirements must be defined. Reliable operating data must be obtained from historical records and test...

  4. Refinery siting workbook: appendices A and B

    SciTech Connect (OSTI)

    Not Available

    1980-07-01

    The objective of this effort is to develop and provide basic refinery-related information for use by state and local government officials as a basis for establishing responsible refinery siting requirements and policies consistent with the federal clean air and water standards and socio-economic concerns. The report will be organized into two volumes. The main text comprises the basic topics of physical concerns, regulatory requirements, and permitting activities, while the second volume includes the detailed appendix materials such as the applicable laws, and the necessary permits, as available and a glossary of pertinent terms. As a means to this objective, three refinery sizes, 200,000, 100,000 and 30,000 barrels per day crude charge will be discussed in technical terms. Process unit configuration will be presented which will maximize either gasoline or heating oil production with either sweet or sour crude oil feedstocks. The major issues affecting the socio-economic impact of siting the refinery in a given locale will be presented. These data will review the factors affecting the human environment and the issues that must be addressed to assess the impact that a refinery will have on a community. The key federal registrations which impact upon a refinery siting decision shall be reviewed. Summaries of these regulations and a simplified decision diagram for the air and water acts shall be presented to assist both government and refinery officials in understanding the scope of regulatory impact. All pertinent procedures required for refinery permitting shall be reviewed under the generalized headings of air, water, health and safety, land use, and miscellaneous permits. This categorization at the federal, state and local levels of government shall be used as a basis for establishing degrees of emphasis.

  5. Integration of Nonlinear CDU Models in RefineryCDU Models in Refinery

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    naphtha Swing cut model Refinery Production LPG 18 20 Light Naphtha 6 6 Premium Gasoline 20 20 Offers lower net cost & different feed quantities Reg. Gasoline 80 92 Gas Oil 163 170 Fuel Oil 148 160 Net Cost of the refinery Crude distillation unit (CDU) 5 #12;CDU & C d d C lCDU & Cascaded Columns Cascaded Columns

  6. Steam System Management Program Yields Fuel Savings for Refinery 

    E-Print Network [OSTI]

    Gaines, L. D.; Hagan, K. J.

    1983-01-01

    The Phillips refinery at Borger, Texas, determined the need to develop a utility monitoring system. Shortly after this commitment was made, the refinery was introduced to a flowsheet modeling program that could be used to model and optimize steam...

  7. Refinery Input by PADD - Petroleum Supply Annual (2004)

    SciTech Connect (OSTI)

    2009-01-18

    Table showing refinery input of crude oil and petroleum products by Petroleum Administration for Defense Districts (PADD).

  8. Energy efficiency improvement and cost saving opportunities for petroleum refineries

    E-Print Network [OSTI]

    Worrell, Ernst; Galitsky, Christina

    2005-01-01

    Hydrocracking and hydrogen production are growing energy consumers in the refining industry. An energy balance for refineries

  9. How refinery fuel indexes have varied

    SciTech Connect (OSTI)

    Farrar, G.

    1997-01-06

    Refinery fuels costs have endured a steady incline since 1993, except for a period in 1993. As shown in the accompanying table, these increases in cost have occurred for residual fuel oil costs in three of the five PADD districts. The cost for natural gas for refinery usage also dropped steadily during the 3-year study. These conclusions are based on costs of an average refinery fuel consisting of 1 bbl each of PADD Districts 1--5 and an average US cost of 4.4 MMscf natural gas (a 1 bbl equivalent on a BTU content basis). Raw residual fuel oil and natural gas prices come from publications put out by the US Department of Labor.

  10. Crude oil as refinery feed stock

    SciTech Connect (OSTI)

    Boduszynski, M.M.; Farrell, T.R. [Chevron Research and Technology Co., Richmond, CA (United States)

    1995-12-31

    This paper gives a brief overview of the integrated oil refinery. It illustrates that crude oil refining involves {open_quotes}molecular tailoring,{close_quotes} where feed stock molecules are {open_quotes}tailored{close_quotes} through catalytic processing to make products with the most desirable composition. Chemical composition of crude oil as refinery feed stock is discussed. The emphasis is on the understanding of molecular transformations which occur in refinery processes to manufacture light transportation fuels. Diesel fuel manufacturing is used as an example. Recent environmental legislation in the United States has necessitated a significant upgrade in the quality of diesel fuel used for highway transportation. Examples are given to illustrate the impact that petroleum chemistry may have on the industry`s response to government regulations.

  11. Customer Comments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding in ActinideRailCurrentCustomer-CommentsCustomer-Comments

  12. Customer Forum

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding inCustomer-Comments Sign In About | CareersCustomerForum

  13. Customer Training

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding inCustomer-Comments Sign In About | CUSTOMER

  14. Refinery siting workbook: appendices C to O

    SciTech Connect (OSTI)

    Not Available

    1980-07-01

    Applicable laws and permits available for the selection and building of petroleum refineries are enclosed. A glossary of pertinent terms is also included. References related to the National Environmental Policy Act, the Clean Air Act, the Federal Water Pollution Control Act, Resource Conservation and Recovery Act, Toxic Substance Control Act, and Wetlands and Coastal Zone are included. Permit information is also presented. (DC)

  15. Custom Projects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding in ActinideRailCurrent ResearchInnovationCustom-Projects

  16. Customer Comments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding in ActinideRailCurrentCustomer-Comments Sign In About |

  17. Customer Comments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding in ActinideRailCurrentCustomer-Comments Sign In About

  18. Customer Comments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding in ActinideRailCurrentCustomer-Comments Sign In

  19. Customer Comments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding in ActinideRailCurrentCustomer-Comments Sign

  20. Customer Comments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding in ActinideRailCurrentCustomer-Comments

  1. Customer Comments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding inCustomer-Comments Sign In About | Careers | Contact |

  2. Customer Comments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding inCustomer-Comments Sign In About | Careers | Contact

  3. Customer Comments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding inCustomer-Comments Sign In About | Careers |

  4. Customer Comments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding inCustomer-Comments Sign In About | Careers

  5. Customer Involvement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding inCustomer-Comments Sign In About |

  6. Our Customers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesseworkSURVEYI/O Streams forOrhan Kizilkaya, Ph.D. Title:OtherOur Customers

  7. Opportunities for Biorenewables in Oil Refineries

    SciTech Connect (OSTI)

    Marker, T.L.

    2005-12-19

    Abstract: The purpose of this study was to evaluate the potential for using biorenewable feedstocks in oil refineries. Economic analyses were conducted, with support from process modeling and proof of principle experiments, to assess a variety of potential processes and configurations. The study considered two primary alternatives: the production of biodiesel and green diesel from vegetable oils and greases and opportunities for utilization of pyrolysis oil. The study identified a number of promising opportunities for biorenewables in existing or new refining operations.

  8. Flare Gas Recovery in Shell Canada Refineries 

    E-Print Network [OSTI]

    Allen, G. D.; Wey, R. E.; Chan, H. H.

    1983-01-01

    six years total operating experience with modern flare gas recovery units. The compression facilities in each utilize a two-stage reciprocating machine, one liquid seal drum per flare stack, and an automated load control strategy. The purpose... these issues. SYSTEM CONFIGURATION A schematic of a typical refinery flare gas recovery facility is shown in Figure I. The facilities include the following pieces of equipment: - compressor suction drum - compressor set - inter-stage knock-out drum...

  9. Economic impact analysis for the petroleum refineries NESHAP. Final report

    SciTech Connect (OSTI)

    1995-08-01

    An economic analysis of the industries affected by the Petroleum Refineries National Emmissions Standard for Hazardous Air Pollutants (NESHAP) was completed in support of this standard. The industry for which economic impacts was computed was the petroleum refinery industry. Affected refineries must reduce HAP emissions by the level of control required in the standard. Several types of economic impacts, among them price product changes, output changes, job impacts, and effects on foriegn trade, were computed for the selected regulatory alternative.

  10. Energy efficiency improvement and cost saving opportunities for petroleum refineries

    E-Print Network [OSTI]

    Worrell, Ernst; Galitsky, Christina

    2005-01-01

    refineries with specific energy and cost savings data whenoperations. Typically, energy and cost savings are around 5%the potential energy and cost-savings (Frangopoluos et al. ,

  11. Market Assessment of Refinery Outages Planned for October 2010...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    average values for 2002-2009 excluding months in 2005, 2006, and 2008 affected by hurricanes & refinery closures. Similarly, typical historical values are average planned...

  12. Fuel-Flexible Combustion System for Refinery and Chemical Plant...

    Broader source: Energy.gov (indexed) [DOE]

    safe, reliable, efficient, and low-emission operation across a broad range of fuel compositions, including syngas, biogas, natural gas, and refinery fuel gas. Displacing...

  13. Firing Excess Refinery Butane in Peaking Gas Turbines 

    E-Print Network [OSTI]

    Pavone, A.; Schreiber, H.; Zwillenberg, M.

    1989-01-01

    normal butane production, which will reduce refinery normal butane value and price. Explored is an opportunity for a new use for excess refinery normal butane- as a fuel for utility peaking gas turbines which currently fire kerosene and #2 oil. Our paper...

  14. Virginia Biodiesel Refinery | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop IncIowa (Utility Company)Idaho) JumpWinside, Nebraska (UtilityVipiemmeRefinery

  15. Regulatory impact analysis for the petroleum refineries neshap. Draft report

    SciTech Connect (OSTI)

    Not Available

    1994-07-01

    The report analyzes the regulatory impacts of the Petroleum Refinery National Emission Standard for Hazardous Air Pollutants (NESHAP), which is being promulgated under Section 112 of the Clean Air Act Amendments of 1990 (CCA). This emission standard would regulate the emissions of certain hazardous air pollutants (HAPs) from petroleum refineries. The petroleum refineries industry group includes any facility engaged in the production of motor gasoline, naphthas, kerosene, jet fuels, distillate fuel oils, residual fuel oils, lubricants, or other products made from crude oil or unfinished petroleum derivatives. The report analyzes the impact that regulatory action is likely to have on the petroleum refining industry.

  16. APPA Customer Connections Conference

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Customer Connections Conference is APPA's annual meeting for utility professionals in the areas of:

  17. Nigerian refineries strive for product balance

    SciTech Connect (OSTI)

    Obuasi, P.A.

    1985-06-17

    This article discusses the growth patterns of the Nigerian refining industry. Production and consumption are expected to follow the pattern of consumption of fuel products by the domestic market, Presently, however, production and consumption are not evenly balanced for most fuel products, and non-fuel products are domestically consumed but not produced. Some progress has been made in the effort to match production and consumption of fuel products. But the progress that would have been made to balance non-fuel products has been nullified by 50% of the Daduna refinery being idle. This is due to problems associated with importation of heavy crude oil into Nigeria and also a weak market for asphalt in Nigeria.

  18. Effective Fouling Minimization Increases the Efficiency and Productivity of Refineries

    Broader source: Energy.gov [DOE]

    This factsheet details a project to improve operating procedures, including physical and chemical methods and the use of high-temperature coatings, to allow refineries to operate equipment below threshold fouling conditions and use the most effective minimization techniques.

  19. Integrating NABC bio-oil intermediates into the petroleum refinery

    Broader source: Energy.gov [DOE]

    Breakout Session 2: Frontiers and Horizons Session 2–D: Working Together: Conventional Refineries and Bio-Oil R&D Technologies Thomas Foust, Director, National Bioenergy Center, National Renewable Energy Laboratory

  20. Gas Separation Membrane Use in the Refinery and Petrochemical Industries 

    E-Print Network [OSTI]

    Vari, J.

    1992-01-01

    Membranes have gained commercial acceptance as proven methods to recover valuable gases from waste gas streams. This paper explores ways in which gas separation membranes are used in the refinery and petrochemical industries to recover and purify...

  1. Refinery Energy Conservation Experience with Enhanced Surface Reboilers 

    E-Print Network [OSTI]

    Ragi, E. G.; O'Neill, P. S.

    1981-01-01

    Examples of refinery services where existing reboilers were retubed or replaced with enhanced High Flux tubing to better utilize or conserve energy are reported. (1) Retubing an existing toluene column reboiler permitted the use of low cost 115...

  2. Obstacles and Opportunity: Turbine Motorization in Refineries Today 

    E-Print Network [OSTI]

    Feng, Hua; Liu, Jinghing; Liu, Xiang; Ahmad, Mushtaq; Deng, Alan

    2012-01-01

    Steam turbines have been widely used in oil refineries for driving pumps, compressors and other rotary machines. However, in recent years, the authors of this paper have seen substantial turbine motorization projects completed or being planned...

  3. Energy efficiency improvement and cost saving opportunities for petroleum refineries

    E-Print Network [OSTI]

    Worrell, Ernst; Galitsky, Christina

    2005-01-01

    er iz 4. Energy Consumption The petroleum refining industry2003b. Paramount Petroleum: Plant-Wide Energy-EfficiencyFigure 8. Annual energy costs of petroleum refineries in the

  4. Initial Assessment of U.S. Refineries for Purposes of Potential...

    Office of Scientific and Technical Information (OSTI)

    Initial Assessment of U.S. Refineries for Purposes of Potential Bio-Based Oil Insertions Citation Details In-Document Search Title: Initial Assessment of U.S. Refineries for...

  5. Assessment of coal liquids as refinery feedstocks

    SciTech Connect (OSTI)

    Zhou, P.

    1992-02-01

    The R D of direct coal liquefaction has reached such a stage that current two-stage processes can produce coal liquids with high yields and improved quality at a reasonable cost. To fully realize the potential value, these coal liquids should be refined into high-value liquid transportation fuels. The purpose of this study is to assess coal liquids as feedstocks to be processed by modern petroleum refining technologies. After the introduction, Section 2.0 summarizes ASTM specifications for major transportation fuels: gasoline, jet fuel, and diesel fuel, which serve as a target for coal-liquid refining. A concise description of modern refining processes follows with an emphasis on the requirements for the raw materials. These provide criteria to judge the quality of coal liquids as a refinery feedstock for the production of marketable liquid fuels. Section 3.0 surveys the properties of coal liquids produced by various liquefaction processes. Compared with typical petroleum oils, the current two-stage coal liquids are: Light in boiling range and free of resids and metals; very low in sulfur but relatively high in oxygen; relatively low in hydrogen and high in cyclics content; and essentially toxicologically inactive when end point is lower than 650[degrees]F, particularly after hydroprocessing. Despite these characteristics, the coal liquids are basically similar to petroleum. The modern refining technology is capable of processing coal liquids into transportation fuels meeting all specifications, and hydroprocessinq is obviously the major tool. The important point is the determination of a reasonable product slate and an appropriate refining scheme.

  6. Assessment of coal liquids as refinery feedstocks

    SciTech Connect (OSTI)

    Zhou, P.

    1992-02-01

    The R&D of direct coal liquefaction has reached such a stage that current two-stage processes can produce coal liquids with high yields and improved quality at a reasonable cost. To fully realize the potential value, these coal liquids should be refined into high-value liquid transportation fuels. The purpose of this study is to assess coal liquids as feedstocks to be processed by modern petroleum refining technologies. After the introduction, Section 2.0 summarizes ASTM specifications for major transportation fuels: gasoline, jet fuel, and diesel fuel, which serve as a target for coal-liquid refining. A concise description of modern refining processes follows with an emphasis on the requirements for the raw materials. These provide criteria to judge the quality of coal liquids as a refinery feedstock for the production of marketable liquid fuels. Section 3.0 surveys the properties of coal liquids produced by various liquefaction processes. Compared with typical petroleum oils, the current two-stage coal liquids are: Light in boiling range and free of resids and metals; very low in sulfur but relatively high in oxygen; relatively low in hydrogen and high in cyclics content; and essentially toxicologically inactive when end point is lower than 650{degrees}F, particularly after hydroprocessing. Despite these characteristics, the coal liquids are basically similar to petroleum. The modern refining technology is capable of processing coal liquids into transportation fuels meeting all specifications, and hydroprocessinq is obviously the major tool. The important point is the determination of a reasonable product slate and an appropriate refining scheme.

  7. Monitoring near refineries or airborne chemicals on the SARA Title 3 section 313 list

    SciTech Connect (OSTI)

    Not Available

    1988-01-01

    In this volume, detailed procedures recommended for the measurement of selected petroleum refinery emissions in ambient air are presented.

  8. Monitoring near refineries or airborne chemicals on the SARA Title 3 Section 313 list

    SciTech Connect (OSTI)

    Not Available

    1988-01-01

    This volume identifies publications and databases that address ambient air concentrations measured near petroleum refineries for the selected target chemicals.

  9. Monitoring near refineries for airborne chemicals on the SARA Title 3 Section 313 list

    SciTech Connect (OSTI)

    Not Available

    1989-01-01

    This study provides an ambient air concentration perspective to the engineering estimates of petroleum refinery emissions required under SARA Title III Section 313. It presents and discusses ambient air concentrations of 25 selected target chemicals measured at and near the perimeter (fenceline) of three refineries. Measurements were made over three consecutive 24-hour sampling periods at each refinery. The extent to which the concentrations of the target chemicals were due to fugitive emissions from the refineries is estimated.

  10. Alternative multimedia regulatory programs for next-generation refineries

    SciTech Connect (OSTI)

    Elcock, D.; Gasper, J.; Arguerro, R.; Emerson, D.

    2000-06-22

    The 25-year-old command-and-control environmental regulatory structure in the US has resulted in significant environmental improvements. Recently, however, its limitations (e.g., rigid application regardless of site-specific conditions, disregard of cross-media and multimedia impacts, limited incentives for new technology development and use) have become increasingly apparent. New regulatory approaches that recognize current and anticipated economic constraints, new knowledge of environmental processes and impacts, and the benefits of new technologies are needed. Such approaches could be especially important for the US petroleum refining industry. This industry operates under thin profit margins, releases chemicals that can produce adverse health and environmental impacts, and must meet the technological challenges of producing more highly refined fuels from poorer quality feedstocks. Under a grant from the Environmental Technology Initiative (ETI), Argonne National Laboratory and its subcontractor, Analytical Services, Inc. developed two alternative environmental regulatory programs for next-generation petroleum refineries. (In this report, next-generation refineries refers to the refineries of today as they operate in the next 20 or more years rather than to fully reengineered future refineries.) The objective of the ETI refinery project was to develop future-oriented regulatory programs for next-generation refineries that will expand the use of innovative technologies, encourage pollution prevention, demonstrate environmental responsibility, and maintain refinery economic performance. Rather than suggesting targeted, short-term modifications to existing media-specific command-and-control regulations, the ETI project suggests the use of new approaches that are broader and more flexible. It recognizes that giving refineries flexibility in meeting environmental protection goals can stimulate new technology development and use. Unlike most US Environmental Protection Agency (EPA) reinvention efforts, which seek results in 12 to 18 months, this ETI effort assumes a time frame of 20 years or more. It also assumes that existing laws and regulations can be changed. An iterative and interactive process was used by the project team to develop the alternative approaches. Information and stakeholder input were integrated to provide for constant revision and improvement. First, guidelines and principles were established to bound the study and set parameters for developing the approaches. Next, existing and projected environmental laws and regulations affecting petroleum refineries were examined to identify areas needing change. Then, to understand future challenges and opportunities, the projected refinery operating environment was described in terms of feedstock, product, technology, and economics. Finally several goals and indicators for assessing and comparing the alternatives were identified. On the basis of this background information, more than 60 options that could efficiently and effectively protect human health and the environment were identified. These options ranged from fundamental changes in program philosophy to procedural improvements. After the options were evaluated against the goals and indicators, many of them were integrated into two separate thematic paradigms: a risk-based paradigm and a goal-based paradigm. Elements common to both approaches include the following: (1) Establish the baseline--In establishing the baseline, the refinery and the regulator jointly identify residuals for which release limits must be established; (2) Set residual release limits--The refinery and the regulator jointly specify release limits on a facility-wide rather than a source-specific basis. A facility-wide permit documents the release limits; and (3) Assure compliance--Incentives provide the basis for assuring compliance, and flexibility in the compliance method is encouraged. Penalties apply if releases exceed the limits, and reporting requirements are streamlined relative to current practices.

  11. Mazheikiai refinery modernization study. Executive summary. Export trade information

    SciTech Connect (OSTI)

    Not Available

    1994-01-01

    The study, conducted by Foster Wheeler Corporation, was funded by the U.S. Trade and Development Agency on behalf of Lithuania's Ministry of Energy. The Mazheikiai Oil Refinery is the only one in the Baltic Region and serves the needs of Lithuania, Latvia, Estonia, and Kaliningrad. Before Lithuania's independence in 1990, the refinery was assured of crude supplies from Russia. However, since then the need has arisen to secure alternate sources of crude oil and the ability to process them. The purpose of the report is to provide recommendations to the Ministry of Energy for process improvements, environmental control measures, physical rehabilitation and energy conservation plans for the Mazheikiai Oil Refinery. The volume contains the Executive Summary.

  12. Integration of Refinery Planning and Crude-Oil Scheduling using Lagrangian Decomposition

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    Integration of Refinery Planning and Crude-Oil Scheduling using Lagrangian Decomposition Sylvain: refinery planning and crude-oil operations scheduling. The proposed approach consists of using Lagrangian approaches and produces better solutions in reasonable times. Keywords: refinery planning, crude-oil

  13. Timeline for Customer Choices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Service Forced Outage Reserve Service Secondary Crediting Service (for existing hydro resources only) Resource Remarketing Service Block and SliceBlock customers...

  14. Timeline for Customer Choices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    D) o Load Following customers for FY2012-FY2014 Diurnal Flattening Service Forced Outage Reserve Service Secondary Crediting Service (pre-October 1, 2006 dedicated resources...

  15. Energy Efficiency Roadmap for Petroleum Refineries in California

    SciTech Connect (OSTI)

    none,

    2004-04-01

    Through the California State IOF initiative, the California Energy Commission PIER Program developed a petroleum refining roadmap to identify energy issues and priorities unique to the refining industry in California and create a plan for future R&D that could help California refineries implement energy efficient technologies.

  16. Global Optimization for Scheduling Refinery Crude Oil Operations Ramkumar Karuppiaha

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    Global Optimization for Scheduling Refinery Crude Oil Operations Ramkumar Karuppiaha , Kevin C of a nonconvex Mixed Integer Nonlinear Programming (MINLP) model for the scheduling of crude oil movement of crude oil and products. Furthermore, detailed scheduling models often require a continuous time

  17. Energy efficiency improvement and cost saving opportunities forpetroleum refineries

    SciTech Connect (OSTI)

    Worrell, Ernst; Galitsky, Christina

    2005-02-15

    The petroleum refining industry in the United States is the largest in the world, providing inputs to virtually any economic sector,including the transport sector and the chemical industry. The industry operates 146 refineries (as of January 2004) around the country,employing over 65,000 employees. The refining industry produces a mix of products with a total value exceeding $151 billion. Refineries spend typically 50 percent of cash operating costs (i.e., excluding capital costs and depreciation) on energy, making energy a major cost factor and also an important opportunity for cost reduction. Energy use is also a major source of emissions in the refinery industry making energy efficiency improvement an attractive opportunity to reduce emissions and operating costs. Voluntary government programs aim to assist industry to improve competitiveness through increased energy efficiency and reduced environmental impact. ENERGY STAR (R), a voluntary program managed by the U.S. Environmental Protection Agency, stresses the need for strong and strategic corporate energy management programs. ENERGY STAR provides energy management tools and strategies for successful corporate energy management programs. This Energy Guide describes research conducted to support ENERGY STAR and its work with the petroleum refining industry.This research provides information on potential energy efficiency opportunities for petroleum refineries. This Energy Guide introduces energy efficiency opportunities available for petroleum refineries. It begins with descriptions of the trends, structure, and production of the refining industry and the energy used in the refining and conversion processes. Specific energy savings for each energy efficiency measure based on case studies of plants and references to technical literature are provided. If available, typical payback periods are also listed. The Energy Guide draws upon the experiences with energy efficiency measures of petroleum refineries worldwide. The findings suggest that given available resources and technology, there are opportunities to reduce energy consumption cost-effectively in the petroleum refining industry while maintaining the quality of the products manufactured. Further research on the economics of the measures, as well as the applicability of these to individual refineries, is needed to assess the feasibility of implementation of selected technologies at individual plants.

  18. Large Customers (DR Sellers)

    SciTech Connect (OSTI)

    Kiliccot, Sila

    2011-10-25

    State of the large customers for demand response integration of solar and wind into electric grid; openADR; CAISO; DR as a pseudo generation; commercial and industrial DR strategies; California regulations

  19. Facilities Management Customer Handbook

    E-Print Network [OSTI]

    Howitt, Ivan

    Building Liaison first; however, Zone Supervisors are an alternate contact. What is a Services Shop. Projects often involve more than one trade and sometimes outside contractors or suppliers. Customers

  20. Alternative future environmental regulatory approaches for petroleum refineries.

    SciTech Connect (OSTI)

    Elcock, D.; Gasper, J.; Moses, D. O.; Emerson, D.; Arguerro, R.; Environmental Assessment; DOE; Analytical Services, Inc.

    2000-01-01

    Recently, many industrial, regulatory, and community leaders have expressed concern that the current environmental regulatory structure disregards multimedia environmental impacts, provides few incentives to develop and use new technologies, and fails to consider site-specific conditions. For the US petroleum refining industry, faced with the need to produce higher-quality fuels from poorer-quality feedstocks, such criticisms are expected to increase. This article offers two alternative environmental regulatory approaches for existing petroleum refineries to use in the future. These alternative approaches are multimedia in scope, provide for new technology development and use, and allow flexibility in the means for meeting environmental goals. They have been reviewed and critiqued by various stakeholders, including industry representatives, regulators, and local and national community and environmental organizations. The integration of stakeholder comments and findings of ongoing national and international regulatory reinvention efforts in the development of these approaches positions them for potential use by other industries in addition to petroleum refineries.

  1. Nutrient-stimulated biodegradation of aged refinery hydrocarbons in soil

    SciTech Connect (OSTI)

    Drake, E.N.; Stokley, K.E.; Calcavecchio, P.; Bare, R.E.; Rothenburger, S.J.; Prince, R.C. [Exxon Research and Engineering, Annandale, NJ (United States); Douglas, G.S. [Arthur D. Little, Inc., Cambridge, MA (United States)

    1995-12-31

    Aged hydrocarbon-contaminated refinery soil was amended with water and nutrients and tilled weekly for 1 year to stimulate biodegradation. Gas chromatography/mass spectrometry (GC/MS) analysis of polycyclic aromatic compounds (PAHs) and triterpane biomarkers, and Freon IR analysis of total petroleum hydrocarbons (TPH), were used to determine the extent of biodegradation. There was significant degradation of extractable hydrocarbon (up to 60%), but neither hopane, oleanane, nor the amount of polars decreased during this period of bioremediation, allowing them to be used as conserved internal markers for estimating biodegradation. Significant degradation of the more alkylated two- and three-ring compounds, and of the four-ring species pyrene and chrysene and their alkylated congeners, was seen. Substantial degradation (> 40%) of benzo(b)fluoranthene, benzo(k)fluoranthene, and benzo(a)pyrene also was seen. The results show that bioremediation can be a useful treatment in the cleanup of contaminated refinery sites.

  2. Shell plans $2. 2-billion renovation of Dutch refinery

    SciTech Connect (OSTI)

    Ladeur, P. (Shell Internationale Petroleum Maatschappij B.V., Hague (Netherlands)); Bijwaard, H.

    1993-04-26

    Royal Dutch/Shell Group recently approved a $2.2 billion rejuvenation of its Pernis refinery, near Rotterdam. This upgrade will enable the refinery to meet product volume and quality demands well into the next century, while reducing environmental emissions. Cornerstones of the $1.7-billion main revamp project are a single-train, 8,000 metric tons/sd (mt/sd), or about 56,000 b/sd, hydrocracking unit and a three-train 1,650 mt/sd residue-gasification unit for production of hydrogen and sulfur-free fuel gas. Fuel gas will be used in a new 115-mw electricity cogeneration plant. In addition, new amine treating, sulfur recovery, and tail gas units will be installed. The paper describes the process selection; hydrocracking unit; gasification unit; utilities; construction; and environmental aspects.

  3. Martinez Refinery Completes Plant-Wide Energy Assessment

    SciTech Connect (OSTI)

    2002-11-01

    This OIT BestPractices Case Study describes how the Equilon Enterprises oil refinery in Martinez, California undertook a plant-wide energy assessment that focused on three key areas: waste minimization, process debottlenecking, and operations optimization. The assessment yielded recommendations, which, if implemented, can save more than 6,000,000 MMBtu per year and an estimated $52,000,000 per year, plus improve process control and reduce waste.

  4. University of Maine Integrated Forest Product Refinery (IFPR) Technology Research

    SciTech Connect (OSTI)

    Pendse, Hemant P.

    2010-11-23

    This project supported research on science and technology that forms a basis for integrated forest product refinery for co-production of chemicals, fuels and materials using existing forest products industry infrastructure. Clear systems view of an Integrated Forest Product Refinery (IFPR) allowed development of a compelling business case for a small scale technology demonstration in Old Town ME for co-production of biofuels using cellulosic sugars along with pulp for the new owners of the facility resulting in an active project on Integrated Bio-Refinery (IBR) at the Old Town Fuel & Fiber. Work on production of advanced materials from woody biomass has led to active projects in bioplastics and carbon nanofibers. A lease for 40,000 sq. ft. high-bay space has been obtained to establish a Technology Research Center for IFPR technology validation on industrially relevant scale. UMaine forest bioproducts research initiative that began in April 2006 has led to establishment of a formal research institute beginning in March 2010.

  5. Initial Assessment of U.S. Refineries for Purposes of Potential...

    Office of Scientific and Technical Information (OSTI)

    U.S. Refineries for Purposes of Potential Bio-Based Oil Insertions Freeman, Charles J.; Jones, Susanne B.; Padmaperuma, Asanga B.; Santosa, Daniel M.; Valkenburg, Corinne; Shinn,...

  6. Aspects of Holly Corporation's Acquisition of Sunoco Inc.'s Tulsa, Oklahoma Refinery

    Reports and Publications (EIA)

    2009-01-01

    The Energy Information Administration has produced a review of aspects of the Holly's acquisition of Sunoco's 85,000-barrels-per-day Tulsa refinery.

  7. Updated estimation of energy efficiencies of U.S. petroleum refineries.

    SciTech Connect (OSTI)

    Palou-Rivera, I.; Wang, M. Q.

    2010-12-08

    Evaluation of life-cycle (or well-to-wheels, WTW) energy and emission impacts of vehicle/fuel systems requires energy use (or energy efficiencies) of energy processing or conversion activities. In most such studies, petroleum fuels are included. Thus, determination of energy efficiencies of petroleum refineries becomes a necessary step for life-cycle analyses of vehicle/fuel systems. Petroleum refinery energy efficiencies can then be used to determine the total amount of process energy use for refinery operation. Furthermore, since refineries produce multiple products, allocation of energy use and emissions associated with petroleum refineries to various petroleum products is needed for WTW analysis of individual fuels such as gasoline and diesel. In particular, GREET, the life-cycle model developed at Argonne National Laboratory with DOE sponsorship, compares energy use and emissions of various transportation fuels including gasoline and diesel. Energy use in petroleum refineries is key components of well-to-pump (WTP) energy use and emissions of gasoline and diesel. In GREET, petroleum refinery overall energy efficiencies are used to determine petroleum product specific energy efficiencies. Argonne has developed petroleum refining efficiencies from LP simulations of petroleum refineries and EIA survey data of petroleum refineries up to 2006 (see Wang, 2008). This memo documents Argonne's most recent update of petroleum refining efficiencies.

  8. Customer Prepay Impact Model

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding inCustomer-Comments Sign In About | CUSTOMER LOADCustomer

  9. CUSTOMERS OF EXECUTIVE DIRECTOR

    E-Print Network [OSTI]

    this unique role to better explore some of the tradeoffs between renewable and clean hydro power production, 2004 Via e-mail and U.S. Mail Mark Walker Director of Public Affairs Northwest Power & Conservation of Northwest Utilities on the Council's Draft 5th Power Plan Dear Mark, Industrial Customers of Northwest

  10. Evolving Custom Communication Protocols

    E-Print Network [OSTI]

    Fernandez, Thomas

    Evolving Custom Communication Protocols by Wes Faler of Part-Time Scientists for 28C3, Berlin One-at-time simulation #12;Easy as 1...2...3... Parameter sweep int driver_movesPerTransaction[] = { 1, 20 }; int driver_wheelTicksPerCommand[] = { 512, 4096 }; int driver_commandsPerPacket[] = { 1, 25

  11. Library Services Customer Charter

    E-Print Network [OSTI]

    Applebaum, David

    Library Services Customer Charter Our commitment to you is to: · ensure your needs are the focus you informed of progress. To help us achieve this we ask you to: · treat your fellow users and library staff with respect and courtesy · carry your College ID or Library membership card in order to access

  12. GDP Formulation of a segmented CDU Swing Cut Model for Refinery Planning

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    REFINERY FUEL RG LPG LN HN KN GO1 GO2 VGO VR1 VR2 C1 LPG LIGHT NAPHTHA PMS 98 MOGAS 95 JET FUEL AGO HGO HFO RG LPG R95 R100 RG LPG CN CGO RG Refinery Operation and Management - J.P. Favennec Crude Distillation

  13. GDP Formulation of a segmented CDU Swing Cut Model for Refinery Planning

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    HF REFINERY FUEL RG LPG LN HN KN GO1 GO2 VGO VR1 VR2 C1 LPG LIGHT NAPHTHA PMS 98 MOGAS 95 JET FUEL AGO HGO HFO RG LPG R95 R100 RG LPG CN CGO RG Refinery Operation and Management - J.P. Favennec Crude

  14. Feasibility study report for the Imperial Valley Ethanol Refinery: a 14. 9-million-gallon-per-year ethanol synfuel refinery utilizing geothermal energy

    SciTech Connect (OSTI)

    Not Available

    1981-03-01

    The construction and operation of a 14,980,000 gallon per year fuel ethanol from grain refinery in the Imperial Valley of California is proposed. The Imperial Valley Ethanol Refinery (refinery) will use hot geothermal fluid from geothermal resources at the East Mesa area as the source of process energy. In order to evaluate the economic viability of the proposed Project, exhaustive engineering, cost analysis, and financial studies have been undertaken. This report presents the results of feasibility studies undertaken in geothermal resource, engineering, marketing financing, management, environment, and permits and approvals. The conclusion of these studies is that the Project is economically viable. US Alcohol Fuels is proceeding with its plans to construct and operate the Refinery.

  15. Clean air amendments put big burden on refinery planners

    SciTech Connect (OSTI)

    Scherr, R.C.; Smalley, G.A. Jr.; Norman, M.E. )

    1991-06-10

    The Clean Air Act Amendments of 1990 will not only require the production of reformulated gasoline but also have significant impact on other refinery-related construction. This must be considered when developing sound planning strategy. The three titles of the Clean Air Act Amendments that will have the greatest effect on refining are: Title I: Nonattainment; Title III: Air toxics; Title V: Permitting. To understand the ramifications of these amendments, it is necessary to review the interactions of new requirements with the permitting and construction schedule shown.

  16. Asia/Pacific refineries spark growth in conversion capacity

    SciTech Connect (OSTI)

    Rhodes, A.K.

    1995-12-18

    Led by refiners in the Asia/Pacific region, worldwide capacity for conversion processes, such as fluid catalytic cracking, hydrocracking, and coking, increased at a faster pace this year than did crude oil distillation capacity. Crude capacity showed only a small gain of 0.4% to 74.5 million b/d according to the Journal`s most recent survey of refining capacity. This article summarizes data from the survey on the largest refiners, capacities, conversion processes, fuel processes, processing comparison, and refinery size.

  17. Advanced controls pay out in 6 weeks at Texas refinery

    SciTech Connect (OSTI)

    Bullerdiek, E.A. [Marathon Oil Co., Texas City, TX (United States); Hobbs, J.W. [Inferential Control Co., Broken Arrow, OK (United States)

    1995-06-19

    Marathon Oil Co. installed advanced controls on two crude units and a fluid catalytic cracking unit main fractionator at its 70,000 b/d Texas City, Tex., refinery. The advanced controls were based on inferred properties supplied by an outside vendor, who also provided consulting and assistance during the implementation phases. (Inferred properties are on-line computations for estimating laboratory test properties, such as ASTM boiling point and flash point, that are used for product quality control.) The paper discusses inferred properties, bias updating, control strategies, control implementation, and post-project work, including fuzzy logic, the statistical quality control program, benefits, and availability.

  18. High-Octane Fuel from Refinery Exhaust Gas: Upgrading Refinery Off-Gas to High-Octane Alkylate

    SciTech Connect (OSTI)

    2009-12-01

    Broad Funding Opportunity Announcement Project: Exelus is developing a method to convert olefins from oil refinery exhaust gas into alkylate, a clean-burning, high-octane component of gasoline. Traditionally, olefins must be separated from exhaust before they can be converted into another source of useful fuel. Exelus’ process uses catalysts that convert the olefin to alkylate without first separating it from the exhaust. The ability to turn up to 50% of exhaust directly into gasoline blends could result in an additional 46 million gallons of gasoline in the U.S. each year.

  19. Office of Headquarters Procurement Services - Employee Customer...

    Office of Environmental Management (EM)

    of urgency that clearly conveys to the customer a willingness to engage in immediate problem solving activity, targeted to achieve customer satisfaction. Customer issues...

  20. Hydrotreating Pyrolytic Lignin to Produce a Refinery Feedstock (Poster)

    SciTech Connect (OSTI)

    French, R. J.

    2013-09-01

    Fast pyrolysis of biomass followed by water separation to produce pyrolytic lignin and hydrotreating of the lignin could be used to produce a stable volatile low-oxygen intermediate liquid. Such a liquid could be converted into a finished motor-fuel in a refinery, taking advantage of the existing infrastructure and economies of scale of refineries. Hydrotreating just the lignin would consume less hydrogen while preserving about half of the energy of the original oil. The aqueous by-products could be reformed to produce the needed hydrogen and would contain much of the unwanted acids and unstable oxygenates. To assess such intermediate liquids, several pyrolytic lignins were prepared by mixing pyrolysis oil with water at 1:1 and 3:1 ratios. The carboxylic acidity in the pyrolytic lignin was reduced to 24 and 10 mg-KOH/g-lignin compared to 81 in the whole oil. These lignins were hydrotreated using Ni-Mo(S)/alumina, Pt/char, or Pd/C(activated) in a semi-batch 1 L stirred autoclave. The oil was stabilized under hydrogen at 150-280 degrees C, then water and light organics were removed by partial depressurization. Hydrodeoxygenation was then performed at 340-400 degrees C. Total pressure was controlled at 70 or 170 bar with hydrogen gas. Organic liquid yields of 39-56% were obtained. For many experiments the organic oxygen content was <7%, acidity was < 7 mg-KOH/g-oil, the volatility was greater than or equal to 94% and, on a carbon basis, the total yield of organic products miscible in hydrocarbons at a 1:10 ratio was over 50%. These properties are probably acceptable to a refinery.The residual liquids left in the reactor at the end of the experiment comprised 60-85% of the organic-phase product while the rest was condensate. 13C-NMR of the residual liquids showed that they were 50-80% aliphatic. 13C-NMR coupled with GC-MS identified phenolic compounds as the main oxygenates in most residual liquids.

  1. Customer Service Plan

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirley Ann JacksonDepartment of EnergyResearchersOctoberCharles DOEJungleWinter (PartCustomer Service

  2. Valero: Houston Refinery Uses Plant-Wide Assessment to Develop an Energy Optimization and Management System

    SciTech Connect (OSTI)

    2005-08-01

    This Industrial Technologies Program case study describes an energy assessment team's recommendations for saving $5 million in energy, water, and other costs at an oil refinery in Houston, Texas.

  3. CO2 Reduction through Optimization of Steam Network in Petroleum Refineries: Evaluation of New Scenario 

    E-Print Network [OSTI]

    Manesh, M. H. K; Khodaie, H.; Amidpour, M.

    2008-01-01

    Steam network of petroleum refinery is energy intensive, and consequently contribute significantly to the greenhouse gases emissions. A simple model for the estimation of CO2 emissions associated with operation of steam network as encountered...

  4. Opportunities for Biomass-Based Fuels and Products in a Refinery

    Office of Energy Efficiency and Renewable Energy (EERE)

    Breakout Session 2: Frontiers and Horizons Session 2–D: Working Together: Conventional Refineries and Bio-Oil R&D Technologies Corinne Valkenburg, Staff Engineer, Pacific Northwest National Laboratory

  5. A Case Study of Steam System Evaluation in a Petroleum Refinery 

    E-Print Network [OSTI]

    Venkatesan, V. V.; Iordanova, N.

    2003-01-01

    in the areas of: Steam generation, Steam distribution, Steam Utilization, Condensate recovery, and Combustion optimization in kilns. By implementing all the above 31 ECMs, the refinery is estimated to save $3.5 million annually. Based on our preliminary...

  6. Pricing with uncertain customer valuations

    E-Print Network [OSTI]

    2007-10-16

    gating the impact of uncertainty on the individual customers' valuations. We derive a ... the importance of gas mileage, as opposed to horsepower, for hybrids

  7. Assuring Mechanical Integrity of Refinery Equipment Through Global ON-Stream Inspection

    SciTech Connect (OSTI)

    John W. Berthold

    2006-02-22

    The development of global on-stream inspection technology will have a dramatic effect on how refinery operations are managed in the U.S. in the future. Global on-stream inspection will provide assurance of the mechanical integrity of critical plant equipment and will allow refineries to operate more efficiently with less impact on our environment and with an increased margin of safety.

  8. Restoration of Refinery Heaters Using the Technique of Prefabricated Ceramic Fiber Lined Panels 

    E-Print Network [OSTI]

    Sento, H. D.

    1981-01-01

    OF REFINERY HEATERS USING THE TECHNIQUE OF PREFABRICATED CERAMIC FIBER LINED PANELS Henry D. Sento Exxon Co. U.S.A., Refining Department Baton Rouge, Louisiana ABSTRACT Refinery heater fuel requirements often represent HEATER COMPONENTS 50... in position and seal welded. This completes the job. TYPICAL RESTORATION These are Panels Being Shop Prefabricated Prior to Turnaround 25 ESL-IE-81-04-04 Proceedings from the Third Industrial Energy Technology Conference Houston, TX, April 26-29, 1981...

  9. Hydrocracking in a low-fuel-oil refinery: a case study

    SciTech Connect (OSTI)

    Koch, N.D.; Traylor, R.W.

    1981-01-01

    At the TOSCO Bakersfield refinery in California, hydrocracking is an important process the conversion of heavy oil to gasoline. The process facilitates maximizing the yield of gasoline, the refinery's primary product. Over the last 15 years, increased production goals have been achieved through increases in the capacity of the hydrocracking unit, and improvements in gasoline yield have been obtained by modifying the unit to use new improved catalysts.

  10. Emission factors for leaks in refinery components in heavy liquid service

    SciTech Connect (OSTI)

    Taback, H.; Godec, M.

    1996-12-31

    The objective of this program was to provide sufficient screening data so that EPA can develop an official set of emission factors (expressed in lb/hr/component) for refinery components (valves, flanged connectors, non-flanged connectors, pumps, open-ended lines, and other) in heavy liquid (BL) service. To accomplish this, 211,000 existing HL screening values from Southern California refineries were compiled and compared with 2,500 new HL screening measurements taken at two refineries in the state of Washington. Since Southern California is an area in extreme non-attainment of the National Ambient Air Quality Standards (NAAQS) and therefore has tight emission control regulations, it was felt that its screening data may not be representative of refineries without tight emission controls. Thus, the Southern California screening data were compared to screening measurements at refineries in an area that is in attainment of the NAAQS and without emissions control, which is the case for those refineries in Washington. It was found that statistically there was no significant difference in emission factors between the two areas and, therefore, there appears to be no difference in emissions from heavy liquid components in areas with and without leak detection and repair (LDAR) programs. The new emission factors range from 1/7 to 1/3 times the current EPA emission factors. This program was sponsored by the American Petroleum Institute (API) and an API report will soon be released providing complete details.

  11. Petroleum Refinery Jobs and Economic Development Impact (JEDI) Model User Reference Guide

    SciTech Connect (OSTI)

    Goldberg, M.

    2013-12-31

    The Jobs and Economic Development Impact (JEDI) models, developed through the National Renewable Energy Laboratory (NREL), are user-friendly tools utilized to estimate the economic impacts at the local level of constructing and operating fuel and power generation projects for a range of conventional and renewable energy technologies. The JEDI Petroleum Refinery Model User Reference Guide was developed to assist users in employing and understanding the model. This guide provides information on the model's underlying methodology, as well as the parameters and references used to develop the cost data utilized in the model. This guide also provides basic instruction on model add-in features, operation of the model, and a discussion of how the results should be interpreted. Based on project-specific inputs from the user, the model estimates job creation, earning and output (total economic activity) for a given petroleum refinery. This includes the direct, indirect and induced economic impacts to the local economy associated with the refinery's construction and operation phases. Project cost and job data used in the model are derived from the most current cost estimations available. Local direct and indirect economic impacts are estimated using economic multipliers derived from IMPLAN software. By determining the regional economic impacts and job creation for a proposed refinery, the JEDI Petroleum Refinery model can be used to field questions about the added value refineries may bring to the local community.

  12. Production of coal-based fuels and value-added products: coal to liquids using petroleum refinery streams

    SciTech Connect (OSTI)

    Clifford, C.E.B.; Schobert, H.H.

    2008-07-01

    We are studying several processes that utilize coal, coal-derived materials, or biomass in existing refining facilities. A major emphasis is the production of a coal-based replacement for JP-8 jet fuel. This fuel is very similar to Jet A and jet A-1 in commercial variation, so this work has significant carry-over into the private sector. We have been focusing on three processes that would be retrofitted into a refinery: (1) coal tar/refinery stream blending and hydro-treatment; (2) coal extraction using refinery streams followed by hydro-treatment; and (3) co-coking of coal blended with refinery streams. 4 figs., 5 tabs.

  13. Customer research, customer-driven design, and business strategy in Massively Multiplayer Online Games

    E-Print Network [OSTI]

    Andrivet, Sébastien

    2007-01-01

    This thesis is a part of an exploration of how the relationships between the customers of Massively Multiplayer Online Games (MMOGs) shape customer experience, and can be used to diminish customer churn and improve customer ...

  14. Customer loyalty in the public transportation context

    E-Print Network [OSTI]

    Webb, Valerie (Valerie Nichole)

    2010-01-01

    Public transportation agencies, much like other service industries, have a constant churn of their customer base. New customers are entering and current customers are defecting every day. Traditionally, efforts to increase ...

  15. FEASIBILITY STUDY FOR A PETROLEUM REFINERY FOR THE JICARILLA APACHE TRIBE

    SciTech Connect (OSTI)

    John D. Jones

    2004-10-01

    A feasibility study for a proposed petroleum refinery for the Jicarilla Apache Indian Reservation was performed. The available crude oil production was identified and characterized. There is 6,000 barrels per day of crude oil production available for processing in the proposed refinery. The proposed refinery will utilize a lower temperature, smaller crude fractionation unit. It will have a Naphtha Hydrodesulfurizer and Reformer to produce high octane gasoline. The surplus hydrogen from the reformer will be used in a specialized hydrocracker to convert the heavier crude oil fractions to ultra low sulfur gasoline and diesel fuel products. The proposed refinery will produce gasoline, jet fuel, diesel fuel, and a minimal amount of lube oil. The refinery will require about $86,700,000 to construct. It will have net annual pre-tax profit of about $17,000,000. The estimated return on investment is 20%. The feasibility is positive subject to confirmation of long term crude supply. The study also identified procedures for evaluating processing options as a means for American Indian Tribes and Native American Corporations to maximize the value of their crude oil production.

  16. Santee Cooper- Business Custom Rebates

    Broader source: Energy.gov [DOE]

    Santee Cooper has developed a Business Custom Rebate as part of their Reduce the Use: Business Prescriptive Rebate Program, which was designed to reduce a business's overall electricity use.

  17. Industrial Customer Perspectives on Utility Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Customer Perspectives on Utility Energy Efficiency Programs Industrial Customer Perspectives on Utility Energy Efficiency Programs These presentations from ATK Aerospace Systems,...

  18. Residential Energy Efficiency Customer Service Best Practices...

    Energy Savers [EERE]

    Residential Energy Efficiency Customer Service Best Practices Residential Energy Efficiency Customer Service Best Practices Better Buildings Residential Network Peer Exchange Call...

  19. Mazheikiai refinery modernization study. Final report. Volume 2. Export trade information

    SciTech Connect (OSTI)

    Not Available

    1994-01-01

    The study, conducted by Foster Wheeler Corporation, was funded by the U.S. Trade and Development Agency on behalf of Lithuania's Ministry of Energy. The Mazheikiai Oil Refinery is the only one in the Baltic Region and serves the needs of Lithuania, Latvia, Estonia, and Kaliningrad. Before Lithuania's independence in 1990, the refinery was assured of crude supplies from Russia. However, since then the need has arisen to secure alternate sources of crude oil and the ability to process them. The purpose of the report is to provide recommendations to the Ministry of Energy for process improvements, environmental control measures, physical rehabilitation and energy conservation plans for the Mazheikiai Oil Refinery. This is Volume 2 of the study.

  20. Mazheikiai refinery modernization study. Final report. Volume 3. Export trade information

    SciTech Connect (OSTI)

    Not Available

    1994-01-01

    The study, conducted by Foster Wheeler Corporation, was funded by the U.S. Trade and Development Agency on behalf of Lithuania's Ministry of Energy. The Mazheikiai Oil Refinery is the only one in the Baltic Region and serves the needs of Lithuania, Latvia, Estonia, and Kaliningrad. Before Lithuania's independence in 1990, the refinery was assured of crude supplies from Russia. However, since then the need has arisen to secure alternate sources of crude oil and the ability to process them. The purpose of the report is to provide recommendations to the Ministry of Energy for process improvements, environmental control measures, physical rehabilitation and energy conservation plans for the Mazheikiai Oil Refinery. This is Volume 3 of the study.

  1. Mazheikiai refinery modernization study. Final report. Volume 1. Export trade information

    SciTech Connect (OSTI)

    Not Available

    1994-01-01

    The study, conducted by Foster Wheeler Corporation, was funded by the U.S. Trade and Development Agency on behalf of Lithuania's Ministry of Energy. The Mazheikiai Oil Refinery is the only one in the Baltic Region and serves the needs of Lithuania, Latvia, Estonia, and Kaliningrad. Before Lithuania's independence in 1990, the refinery was assured of crude supplies from Russia. However, since then the need has arisen to secure alternate sources of crude oil and the ability to process them. The purpose of the report is to provide recommendations to the Ministry of Energy for process improvements, environmental control measures, physical rehabilitation and energy conservation plans for the Mazheikiai Oil Refinery. This is Volume 1 of the study.

  2. Fuel-Flexible Combustion System for Refinery and Chemical Plant Process Heaters

    SciTech Connect (OSTI)

    2010-06-01

    Funded by the American Recovery and Reinvestment Act of 2009 ENVIRON International Corporation, in collaboration with Callidus Technologies by Honeywell and Shell Global Solutions, Inc., will develop and demonstrate a full-scale fuel blending and combustion system. This system will allow a broad range of opportunity fuel compositions, including syngas, biogas, natural gas, and refinery fuel gas, to be safely, cost-effectively, and efficiently utilized while generating minimal emissions of criteria pollutants. The project will develop a commercial technology for application in refinery and chemical plant process heaters where opportunity fuels are used.

  3. Allocation of energy use in petroleum refineries to petroleum products : implications for life-cycle energy use and emission inventory of petroleum transportation fuels.

    SciTech Connect (OSTI)

    Wang, M.; Lee, H.; Molburg, J.

    2004-01-01

    Studies to evaluate the energy and emission impacts of vehicle/fuel systems have to address allocation of the energy use and emissions associated with petroleum refineries to various petroleum products because refineries produce multiple products. The allocation is needed in evaluating energy and emission effects of individual transportation fuels. Allocation methods used so far for petroleum-based fuels (e.g., gasoline, diesel, and liquefied petroleum gas [LPG]) are based primarily on mass, energy content, or market value shares of individual fuels from a given refinery. The aggregate approach at the refinery level is unable to account for the energy use and emission differences associated with producing individual fuels at the next sub-level: individual refining processes within a refinery. The approach ignores the fact that different refinery products go through different processes within a refinery. Allocation at the subprocess level (i.e., the refining process level) instead of at the aggregate process level (i.e., the refinery level) is advocated by the International Standard Organization. In this study, we seek a means of allocating total refinery energy use among various refinery products at the level of individual refinery processes. We present a petroleum refinery-process-based approach to allocating energy use in a petroleum refinery to petroleum refinery products according to mass, energy content, and market value share of final and intermediate petroleum products as they flow through refining processes within a refinery. The results from this study reveal that product-specific energy use based on the refinery process-level allocation differs considerably from that based on the refinery-level allocation. We calculated well-to-pump total energy use and greenhouse gas (GHG) emissions for gasoline, diesel, LPG, and naphtha with the refinery process-based allocation approach. For gasoline, the efficiency estimated from the refinery-level allocation underestimates gasoline energy use, relative to the process-level based gasoline efficiency. For diesel fuel, the well-to-pump energy use for the process-level allocations with the mass- and energy-content-based weighting factors is smaller than that predicted with the refinery-level allocations. However, the process-level allocation with the market-value-based weighting factors has results very close to those obtained by using the refinery-level allocations. For LPG, the refinery-level allocation significantly overestimates LPG energy use. For naphtha, the refinery-level allocation overestimates naphtha energy use. The GHG emission patterns for each of the fuels are similar to those of energy use.We presented a refining-process-level-based method that can be used to allocate energy use of individual refining processes to refinery products. The process-level-based method captures process-dependent characteristics of fuel production within a petroleum refinery. The method starts with the mass and energy flow chart of a refinery, tracks energy use by individual refining processes, and distributes energy use of a given refining process to products from the process. In allocating energy use to refinery products, the allocation method could rely on product mass, product energy contents, or product market values as weighting factors. While the mass- and energy-content-based allocation methods provide an engineering perspective of energy allocation within a refinery, the market-value-ased allocation method provides an economic perspective. The results from this study show that energy allocations at the aggregate refinery level and at the refining process level could make a difference in evaluating the energy use and emissions associated with individual petroleum products. Furthermore, for the refining-process-level allocation method, use of mass -- energy content- or market value share-based weighting factors could lead to different results for diesel fuels, LPG, and naphtha. We suggest that, when possible, energy use allocations should be made at the lowest subprocess level

  4. Scheduling of oil-refinery operations Felipe Diaz-Alvarado2, Francisco Trespalacios1,

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    for the products. Product yields are specified for each crude. Minimum product yields for CDU. D-Slot Based Continuous-Time Formulation for Crude-Oil Scheduling Problems. Industrial & Engineering Chemistry Mouret, S. Optimal Scheduling of Refinery Crude-Oil Operations. Ph.D. Thesis. Department of Chemical

  5. 1994 lubricating oil and wax capacities of U. S. and Canadian refineries

    SciTech Connect (OSTI)

    Not Available

    1994-01-01

    The paper consists of several tables which list the names of US and Canadian refineries, their location, and their capacity for production of lubricating oil and waxes categorized by finishing operations and primary processing. A separate table lists US and Canadian re-refiners and their capacity for refining waste lubricating oils.

  6. Optimal Industrial Load Control in Smart Grid: A Case Study for Oil Refineries

    E-Print Network [OSTI]

    Mohsenian-Rad, Hamed

    the industry is a manufacturing unit (e.g., automotive, food, pulp-and-paper, chemicals, refining, and iron. In this paper, we investigate optimal load control for industrial load which involves several new and distinctOptimal Industrial Load Control in Smart Grid: A Case Study for Oil Refineries Armen Gholian, Hamed

  7. The effects of soil type and chemical treatment on nickel speciation in refinery enriched soils

    E-Print Network [OSTI]

    The effects of soil type and chemical treatment on nickel speciation in refinery enriched soils a Rhizosphere Science Research Group, Department of Plant and Soil Sciences, N122S Agricultural Sciences North Manure and Byproducts Laboratory, Beltsville, MD 20705, USA c Environmental Soil Chemistry Research Group

  8. Application and Operation of a 2-MW Organic Rankine Cycle System on a Refinery FCC Unit 

    E-Print Network [OSTI]

    Drake, R. L.

    1985-01-01

    The nation's largest organic Rankine cycle (ORC) waste heat recovery system was started up in July 1984 at a West Coast oil refinery. The system includes two hermetically sealed turbine-generator units, each rated at 1070 kW. Each turbine...

  9. Gross Error Detection in Chemical Plants and Refineries for On-Line Optimization

    E-Print Network [OSTI]

    Pike, Ralph W.

    Automation - FACS DOT Products, Inc. - NOVA #12;Distributed Control System Runs control algorithmthreetimesGross Error Detection in Chemical Plants and Refineries for On-Line Optimization Xueyu Chen, Derya, Baton Rouge, LA (February 28, 2003) #12;INTRODUCTION o Status of on-line optimization o Theoretical

  10. Customizing a VOC control technology

    SciTech Connect (OSTI)

    Enneking, J.C.

    1998-12-31

    An extremely important but very difficult element in applying an emission control device to an exhaust stream is to chose the proper technology. Once it has been determined that recovery, rather than destruction, is appropriate, there are still several process choices available. The type of process is generally dictated by the VOC concentration and total air flow rate. Adsorption is usually chosen for low concentrations and high flow rates while refrigeration is usually best for high concentrations and low flow rates. This paper describes six applications. Adsorption was applied to two of them and condensation to the other four. Solvent vapors from a tape coating operation are recovered in an activated carbon adsorption process and reused. VOC`s from soil vapor extraction operations are captured by activated carbon which is regenerated by a mobile unit. VOC`s displaced from filling tank cars at a refinery are condensed at low temperatures in a high pressure system which uses a pressure swing dryer to remove water. Two different processes were installed to prevent VOC emissions from pharmaceutical processing plants. They both use a thermal swing dryer to remove moisture and low temperature condensation to recover the solvent. With very high concentrations of solvent in an inert gas stream, indirect condensation is used to purify the nitrogen and recover the solvent for reuse. Process flow diagrams and operating results are presented.

  11. Customer segmentation in the medical devices industry

    E-Print Network [OSTI]

    Basu, Probal

    2007-01-01

    This thesis addresses Company X's concerns about its product shipment options. The company ships over 70% of its products to its customers using the primary service provider that ensures that the product is at the customer ...

  12. customs

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal01 Sandia4)9 Federal RegisterStorm1 3446 YEAR 20142/%2A2/%2A

  13. Effectiveness of in site biodegradation for the remediation of polycyclic aromatic hydrocarbons at a contaminated oil refinery, Port Arthur, Texas 

    E-Print Network [OSTI]

    Moffit, Alfred Edward

    2000-01-01

    The effectiveness of bioremediation for the removal of polycyclic aromatic hydrocarbons (PAHs) from sediments contaminated with highly weathered petroleum was evaluated at a contaminated oil refinery. The sediments were chronically contaminated...

  14. UCD IT Services Customer Charter "Our commitment

    E-Print Network [OSTI]

    services. UCD IT Services is committed to supporting the University's core missions of education, researchUCD IT Services Customer Charter "Our commitment to you" UCD IT Services Seirbhísí TF UCD #12 Services The Customer Charter sets out: Our Customer Charter UCD IT Services #12;Who we are & who our

  15. Customer Service Specialist Job Number: 54844874

    E-Print Network [OSTI]

    Heller, Barbara

    Customer Service Specialist Job Number: 54844874 Company Name: Baxter International, Inc Job to the customer and/or the sales team including any corrective actions needed to prevent the failure in the future: Medical Information, Distribution Centers, Planning and Deployment, Credit and Collections, Customer

  16. Future Power Systems 21 - The Smart Customer | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Future Power Systems 21 - The Smart Customer Future Power Systems 21 - The Smart Customer Future Power Systems 21 - The Smart Customer: From Future Power Systems (FPS) articles 18...

  17. Modeling of customer adoption of distributed energy resources

    E-Print Network [OSTI]

    2001-01-01

    Customer Adoption of Distributed Energy Resources Ozbek, A.Customer Adoption of Distributed Energy Resources Figure 39.Customer Adoption of Distributed Energy Resources REFERENCES

  18. How to convert gradually to oil-refinery hydrocracking

    SciTech Connect (OSTI)

    Basta, N.

    1986-01-06

    Over the past ten years, demand for refined petroleum products has been relatively constant, primarily because of worldwide conservation efforts. In fact, the demand for residual fuels has actually declined, while the market for gasoline has risen just slightly. Only middle distillates, which have seen a moderate increase since 1975, will continue to rise slowly over the next several years, says UOP Inc., a Des Plaines, Illinois, division of Allied-Signal Inc. This rise, coupled with the decline in resid demand, dictates the need for conversion capacity that will be capable of selectively producing distillate products. Traditionally, this need has been filled by hydrocracking gas oils to distillates. However, full conversion to hydrocracking requires high capital investment, which may not be possible in today's competitive refining industry. As a solution to this problem, UOP has developed a staged approach to distillate production, which allows the refiner both to phase in capital costs and to increase production over a number of years, says Mark Reno, manager of hydrocracking process development. The staged approach involves (1) constructing a mild-hydrocracking (MHC) unit that would produce less distillate, but at a lower cost; (2) upgrading to full conversion at a later date. The aldready-installed MHC equipment would be used with only minor modifications. UOP offers its own mild/full hydrocracking technology, called unibon; the firm says it can also convert a customer's existing hydrotreating equipment.

  19. Use of Comprehensive Utility Software for Optimal Energy Management and Electric Grid Failure Assessment in an Oil Refinery 

    E-Print Network [OSTI]

    Bedard, S.; Hammache, A.; Poulin, B.; Ayotte-Sauve, A.

    2015-01-01

    software for optimal energy management and electric grid failure assessment in an oil refinery New Orleans – IETC Conference June 3, 2015 Serge Bédard M. Eng. Senior Project Manager CanmetENERGY - Industrial Optimization Systems ESL-IE-15...-06-18 Proceedings of the Thrity-Seventh Industrial Energy Technology Conference New Orleans, LA. June 2-4, 2015 ? Who is CanmetENERGY ? Project objectives ? Description of the refinery ? COGEN software ? Modeling strategy ? Energy saving projects ? Savings...

  20. REFINERY INTEGRATION OF BY-PRODUCTS FROM COAL-DERIVED JET FUELS

    SciTech Connect (OSTI)

    Leslie R. Rudnick; Andre Boehman; Chunshan Song; Bruce Miller; John Andresen

    2004-04-23

    This report summarizes the accomplishments toward project goals during the first six months of the project to assess the properties and performance of coal based products. These products are in the gasoline, diesel and fuel oil range and result from coal based jet fuel production from an Air Force funded program. Specific areas of progress include generation of coal based material that has been fractionated into the desired refinery cuts, acquisition and installation of a research gasoline engine, and modification of diesel engines for use in evaluating diesel produced in the project. The desulfurization of sulfur containing components of coal and petroleum is being studied so that effective conversion of blended coal and petroleum streams can be efficiently converted to useful refinery products. Equipment is now in place to begin fuel oil evaluations to assess the quality of coal based fuel oil. Coal samples have procured and are being assessed for cleaning prior to use in coking studies.

  1. Refinery Integration of By-Products from Coal-Derived Jet Fuels

    SciTech Connect (OSTI)

    Leslie R. Rudnick; Andre Boehman; Chunshan Song; Bruce Miller; Gareth Mitchell

    2005-11-17

    This report summarizes the accomplishments toward project goals during the first six months of the second year of the project to assess the properties and performance of coal based products. These products are in the gasoline, diesel and fuel oil range and result from coal based jet fuel production from an Air Force funded program. Specific areas of progress include generation of coal based material that has been fractionated into the desired refinery cuts, acquisition and installation of a research gasoline engine, and modification of diesel engines for use in evaluating diesel produced in the project. The desulfurization of sulfur containing components of coal and petroleum is being studied so that effective conversion of blended coal and petroleum streams can be efficiently converted to useful refinery products. Evaluations to assess the quality of coal based fuel oil are reported. Coal samples have procured and are being assessed for cleaning prior to use in coking studies.

  2. REFINERY INTEGRATION OF BY-PRODUCTS FROM COAL-DERIVED JET FUELS

    SciTech Connect (OSTI)

    Leslie R. Rudnick; Andre Boehman; Chunshan Song; Bruce Miller; Gareth Mitchell

    2005-05-18

    This report summarizes the accomplishments toward project goals during the first six months of the second year of the project to assess the properties and performance of coal based products. These products are in the gasoline, diesel and fuel oil range and result from coal based jet fuel production from an Air Force funded program. Specific areas of progress include generation of coal based material that has been fractionated into the desired refinery cuts, acquisition and installation of a research gasoline engine, and modification of diesel engines for use in evaluating diesel produced in the project. The desulfurization of sulfur containing components of coal and petroleum is being studied so that effective conversion of blended coal and petroleum streams can be efficiently converted to useful refinery products. Equipment is now in place to begin fuel oil evaluations to assess the quality of coal based fuel oil. Coal samples have procured and are being assessed for cleaning prior to use in coking studies.

  3. Refinery Integration of By-Products from Coal-Derived Jet Fuels

    SciTech Connect (OSTI)

    Leslie R. Rudnick; Andre Boehman; Chunshan Song; Bruce Miller; John Andresen

    2004-09-17

    This report summarizes the accomplishments toward project goals during the first twelve months of the project to assess the properties and performance of coal based products. These products are in the gasoline, diesel and fuel oil range and result from coal based jet fuel production from an Air Force funded program. Specific areas of progress include generation of coal based material that has been fractionated into the desired refinery cuts, acquisition and installation of a research gasoline engine, and modification of diesel engines for use in evaluating diesel produced in the project. The desulfurization of sulfur containing components of coal and petroleum is being studied so that effective conversion of blended coal and petroleum streams can be efficiently converted to useful refinery products. Equipment is now in place to begin fuel oil evaluations to assess the quality of coal based fuel oil. Coal samples have procured and are being assessed for cleaning prior to use in coking studies.

  4. Refinery Furnaces Retrofit with Gas Turbines Achieve Both Energy Savings and Emission Reductions 

    E-Print Network [OSTI]

    Giacobbe, F.; Iaquaniello, G.; Minet, R. G.; Pietrogrande, P.

    1985-01-01

    RETROFIT WITH GAS TURBINES ACHIEVE BOTH ENERGY SAVINGS AND EMISSION REDUCTIONS F. Giacobbe*, G. Iaquaniello**, R. G. Minet*, P. Pietrogrande* *KTI Corp., Research and Development Division, Monrovia, California **KTI SpA., Rome, Italy ABSTRACT... Integrating gas turbines with refinery furnaces can be a cost effective means of reducing NO emissions while also generating electricity ~t an attractive heat rate. Design considerations and system costs are presented. INTRODUCTION Petroleum refining...

  5. Evaluating electric-resistance-welded tubing for refinery and chemical plant applications

    SciTech Connect (OSTI)

    Polk, C.J.; Hotaling, A.C. )

    1993-02-01

    A laboratory technique was developed to assess the potential for preferential attack along the longitudinal seam of electric-resistance-welded (ERW) carbon steel tubing exposed to refinery and chemical plant process streams. Used in conjunction with an evaluation of mill fabrication practices, the test procedure can identify high-quality ERW products that can be used in many applications in place of seamless components at significant cost savings.

  6. Refinery Integration of By-Products from Coal-Derived Jet Fuels

    SciTech Connect (OSTI)

    Caroline E. Burgess Clifford; Andre Boehman; Chunshan Song; Bruce Miller; Gareth Mitchell

    2006-05-17

    This report summarizes the accomplishments toward project goals during the first six months of the third year of the project to assess the properties and performance of coal based products. These products are in the gasoline, diesel and fuel oil range and result from coal based jet fuel production from an Air Force funded program. Specific areas of progress include generation of coal based material that has been fractionated into the desired refinery cuts, acquisition and installation of a research gasoline engine, and modification of diesel engines for use in evaluating diesel produced in the project. Characterization of the gasoline fuel indicates a dominance of single ring alkylcycloalkanes that have a low octane rating; however, blends containing these compounds do not have a negative effect upon gasoline when blended in refinery gasoline streams. Characterization of the diesel fuel indicates a dominance of 3-ring aromatics that have a low cetane value; however, these compounds do not have a negative effect upon diesel when blended in refinery diesel streams. The desulfurization of sulfur containing components of coal and petroleum is being studied so that effective conversion of blended coal and petroleum streams can be efficiently converted to useful refinery products. Equipment is now in place to begin fuel oil evaluations to assess the quality of coal based fuel oil. Combustion and characterization of fuel oil indicates that the fuel is somewhere in between a No. 4 and a No. 6 fuel oil. Emission testing indicates the fuel burns similarly to these two fuels, but trace metals for the coal-based material are different than petroleum-based fuel oils. Co-coking studies using cleaned coal are highly reproducible in the pilot-scale delayed coker. Evaluation of the coke by Alcoa, Inc. indicated that while the coke produced is of very good quality, the metals content of the carbon is still high in iron and silica. Coke is being evaluated for other possible uses. Methods to reduce metal content are being evaluated.

  7. Refinery Upgrading of Hydropyrolysis Oil from Biomass Presentation for BETO 2015 Project Peer Review

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy BillsNo. 195 - Oct. 7,DOERTI |Service ofConditioning FilterReferenceRefinery

  8. The Use of Oil Refinery Wastes as a Dust Suppression Surfactant for Use in Mining

    SciTech Connect (OSTI)

    Dixon-Hardy, D.W.; Beyhan, S.; Ediz, I.G.; Erarslan, K.

    2008-10-15

    In this research, the suitability of a selection of petroleum refinery wastes as a dust suppressant were examined. Dust is a significant problem in surface and underground mining mainly because of its adverse effects on human health and machinery. Hence, dust control and suppression is a vital part of mine planning for mining engineers. Water is the oldest and the cheapest suppressant in dealing with the mine dusts. However, surfactant use has recently been used for a wider range of applications in the mining industry. In order to carry out laboratory experiments, a dust chamber was designed and manufactured. The chamber has an inlet for coal dust entrance and a nozzle for spraying water and the oil refinery wastes. Water and the surfactants were mixed at various ratios and then sprayed onto the coal dusts within the cell. Dust concentration was measured systematically to determine the effects of surfactant containing solution on the coal dust and the data obtained by the measurements were analyzed. The results showed that the oil refinery wastes could be used as a dust suppressant, which may create an economical utilization for the wastes concerned.

  9. Who lives near coke plants and oil refineries An exploration of the environmental inequity hypothesis

    SciTech Connect (OSTI)

    Graham, J.D.; Beaulieu, N.D.; Sussman, D.; Sadowitz, M.; Li, Y.C. )

    1999-04-01

    Facility-specific information on pollution was obtained for 36 coke plants and 46 oil refineries in the US and matched with information on populations surrounding these 82 facilities. These data were analyzed to determine whether environmental inequities were present, whether they were more economic or racial in nature, and whether the racial composition of nearby communities has changed significantly since plants began operations. The Census tracts near coke plants have a disproportionate share of poor and nonwhite residents. Multivariate analyses suggest that existing inequities are primarily economic in nature. The findings for oil refineries are not strongly supportive of the environmental inequity hypothesis. Rank ordering of facilities by race, poverty, and pollution produces limited (although not consistent) evidence that the more risky facilities tend to be operating in communities with above-median proportions of nonwhite residents (near coke plants) and Hispanic residents (near oil refineries). Over time, the radical makeup of many communities near facilities has changed significantly, particularly in the case of coke plants sited in the early 1900s. Further risk-oriented studies of multiple manufacturing facilities in various industrial sectors of the economy are recommended.

  10. Sandia Energy - Customers & Partners

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation of Fe(II) byMultidayAlumniProjects Caterpillar,ConcentratingctascaCustomers

  11. Enhanced Customer/Utility Relations Through an EPRI Assisted Project 

    E-Print Network [OSTI]

    Bailey, H.

    1995-01-01

    for gasoline. These capabilities will enhance the competitiveness of Atlas and position the refinery for future production of reformulated gasoline. For the electric utility, SWEPCO, the changes to the plant will yield approximately 10MW of additional...

  12. Does Customer Auditing Help Chinese Workers?

    E-Print Network [OSTI]

    He, Goujun; Perloff, Jeffrey M.

    2012-01-01

    and Alberto Brause. 2007. Does monitoring improve labourDoes Customer Auditing Help Chinese Workers? Guojun He* andworkers well-being. Auditing does not affect the suppliers’

  13. Customer Information and Behavior Fact Sheet

    SciTech Connect (OSTI)

    Customer Information and Behavior Working Group

    2012-11-15

    Provides an overview of how state policymakers, utilities, and regulators can overcome barriers to deploying customer energy information and feedback strategies.

  14. BPA Response to Customer Comments-EBBA

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Integration Team Responses to Customer Comments Received on BPA's Proposed Enhanced BPA Balancing Authority (EBBA) - 61212 Table of Contents 1. Market-based Mechanisms...

  15. Customer Aggregation: An Opportunity for Green Power?

    E-Print Network [OSTI]

    Customer Aggregation: An Opportunity for Green Power? February 2001 · NREL/TP-620-29408 Edward Holt. DE-AC36-99-GO10337 February 2001 · NREL/TP-620-29408 Customer Aggregation: An Opportunity for Green or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process

  16. Does Customer Auditing Help Chinese Workers?

    E-Print Network [OSTI]

    Perloff, Jeffrey M.

    Does Customer Auditing Help Chinese Workers? Guojun He* and Jeffrey M. Perloff** June 2012 of the Giannini Foundation #12;Abstract Auditing by downstream firms has limited effects on Chinese firms medical insurance, and unemployment insurance. #12;Does Customer Auditing Help Chinese Workers

  17. A blending problem (Taha, Example 2.3-7, almost) An oil refinery has three stages of production: a distillation tower, which

    E-Print Network [OSTI]

    Galvin, David

    A blending problem (Taha, Example 2.3-7, almost) An oil refinery has three stages of production: a distillation tower, which takes in crude oil, up to a maximum of 650,000 barrels per day (bbl/day) and produces **" means "**% octane".) Once crude oil enters the system, it goes fully through the process. The refinery

  18. BLENDING PROBLEM A refinery blends four petroleum components into three grades of

    E-Print Network [OSTI]

    Shier, Douglas R.

    BLENDING PROBLEM A refinery blends four petroleum components into three grades of gasoline/day $/barrel #1 5,000 $9.00 #2 2,400 7.00 #3 4,000 12.00 #4 1,500 6.00 Blending formulas and selling price 4,000 x4R + x4P + x4L 1,500 #12;blending: (1) x1R / (x1R + x2R + x3R + x4R) .40 or x1R .40(x1R

  19. Modeling of Customer Adoption of Distributed Energy Resources

    E-Print Network [OSTI]

    Modeling of Customer Adoption of Distributed Energy Resources CALIFORNIA ENERGY COMMISSION Reliability Technology Solutions Modeling of Customer Adoption of Distributed Energy Resources Prepared the consequences. #12;#12;Modeling of Customer Adoption of Distributed Energy Resources iii Table of Contents

  20. Modeling Customer Lifetimes with Multiple Causes of Churn

    E-Print Network [OSTI]

    Braun, Michael

    Customer retention and customer churn are key metrics of interest to marketers, but little attention has been placed on linking the different reasons for which customers churn to their value to a contractual service provider. ...

  1. Nebraska Customized Job Training Advantage (Nebraska)

    Broader source: Energy.gov [DOE]

    The Nebraska Customized Job Training Advantage is a flexible job training program with grants from $800-$4000 per qualified new job. Additional grant funding may be available for jobs created in...

  2. Does Customer Auditing Help Chinese Workers?

    E-Print Network [OSTI]

    He, Guojun; Perloff, Jeffrey M.

    2009-01-01

    F. Qin, and A. Brause, 2007, Does monitoring improve labourDoes Customer Auditing Help Chinese Workers? Guojun He* andof a Chinese supplier does not affect that the supplier’s

  3. Using Mobile Applications to Generate Customer Demand | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Using Mobile Applications to Generate Customer Demand Using Mobile Applications to Generate Customer Demand Better Buildings Residential Network Peer Exchange Call Series: Using...

  4. Impacts of Energy Efficiency Programs on Customer Satisfaction

    SciTech Connect (OSTI)

    none,

    2011-11-01

    Provides data from nationwide utility customer satisfaction surveys and two case studies to encourage utilities to offer high-quality energy efficiency programs and services for their customers.

  5. Solving Customer-Driven Microgrid Optimization Problems as DCOPs

    E-Print Network [OSTI]

    Yeoh, William

    Solving Customer-Driven Microgrid Optimization Problems as DCOPs Saurabh Gupta , Palak Jain common customer-driven microgrid (CDMG) optimization problems ­ a comprehensive CDMG optimization problem

  6. Keeping It Simple from the Customer's Perspective - Residential...

    Energy Savers [EERE]

    Keeping It Simple from the Customer's Perspective - Residential Program Design Keeping It Simple from the Customer's Perspective - Residential Program Design Provides information...

  7. Bioremediation of a Process Waste Lagoon at a Southern Polish Oil Refinery -DoE's First Demonstration Project in Poland

    E-Print Network [OSTI]

    Hazen, Terry

    a technology known as biopiling. The original lagoon sludge was amended and sold as a fuel to a local cement,000 ppm was targeted for treatment. The biopile was divided into two sections; an area of approximately at the refinery. Since the fall of 1997, approximately 80 tons of TPH have been removed from the biopile

  8. Extend{trademark} customization -- Experiences and issues

    SciTech Connect (OSTI)

    Parker, R.Y.

    1997-12-09

    Extend{trademark} simulation software is a dynamic modeling package developed by Imagine That Incorporated. The Technology Modeling and Analysis group (TSA-7) at Los Alamos National Laboratory has used Extend extensively over the past few years as one of various tools employed to perform simulation modeling and analysis. Development efforts over much of this period have made Extend a more effective and efficient tool through block customization. TSA-7 has taken advantage of the built-in capability in Extend to allow users to create new or modify existing functional blocks from which simulation models are constructed. As a result, Extend is much more effective and efficient for the group`s applications. This paper summarizes block customization and simulation model development that markedly improved the utilization of the Extend software package. The material covered herein includes some background information on Extend, which is necessary for understanding the balance of the paper. Following the background, the paper addresses Extend block customization efforts, including advantages and disadvantages to customizing, and the impact customization has had on Extend modeling efforts in TSA-7. Brief descriptions of many customized blocks developed by the author are presented in the appendix.

  9. UK, Europe, & ROW (excl. Australia & Canada): USA: Australia: Direct Customer Services, Palgrave Macmillan, VHPS, Customer Services,

    E-Print Network [OSTI]

    Kallenrode, May-Britt

    UK, Europe, & ROW (excl. Australia & Canada): USA: Australia: Direct Customer Services, Palgrave migration in Europe, this book is a welcome contribution to the literature on migration." - Rhacel Parreñas

  10. Reformulated Gasoline Foreign Refinery Rules (Released in the STEO January 1998)

    Reports and Publications (EIA)

    1998-01-01

    On August 27, 1997, the Environmental Protection Agency (EPA) promulgated revised the rules that allow foreign refiners to establish and use individual baselines, but it would not be mandatory (the optional use of an individual refinery baseline is not available to domestic refiners.) If a foreign refiner did not establish and use an individual baseline, the gasoline they export to the United States would be regulated through the importer, and subject to the importer's baseline (most likely the statutory baseline). Specific regulatory provisions are implemented to ensure that the option to use an individual baseline would not lead to adverse environmental impacts. This involves monitoring the average quality of imported gasoline, and if a specified benchmark is exceeded, remedial action would be taken by adjusting the requirements applicable to imported gasoline.

  11. Refinery Integration of By-Products from Coal-Derived Jet Fuels

    SciTech Connect (OSTI)

    Caroline E. Burgess Clifford; Andre' Boehman; Chunshan Song; Bruce Miller; Gareth Mitchell

    2006-09-17

    This report summarizes the accomplishments toward project goals during the second six months of the third year of the project to assess the properties and performance of coal based products. These products are in the gasoline, diesel and fuel oil range and result from coal based jet fuel production from an Air Force funded program. Specific areas of progress include generation of coal based material that has been fractionated into the desired refinery cuts and examination of carbon material, the use of a research gasoline engine to test coal-based gasoline, and modification of diesel engines for use in evaluating diesel produced in the project. At the pilot scale, the hydrotreating process was modified to separate the heavy components from the LCO and RCO fractions before hydrotreating in order to improve the performance of the catalysts in further processing. Characterization of the gasoline fuel indicates a dominance of single ring alkylcycloalkanes that have a low octane rating; however, blends containing these compounds do not have a negative effect upon gasoline when blended in refinery gasoline streams. Characterization of the diesel fuel indicates a dominance of 3-ring aromatics that have a low cetane value; however, these compounds do not have a negative effect upon diesel when blended in refinery diesel streams. Both gasoline and diesel continue to be tested for combustion performance. The desulfurization of sulfur containing components of coal and petroleum is being studied so that effective conversion of blended coal and petroleum streams can be efficiently converted to useful refinery products. Activated carbons have proven useful to remove the heavy sulfur components, and unsupported Ni/Mo and Ni/Co catalysts have been very effective for hydrodesulfurization. Equipment is now in place to begin fuel oil evaluations to assess the quality of coal based fuel oil. Combustion and characterization of the latest fuel oil (the high temperature fraction of RCO from the latest modification) indicates that the fraction is heavier than a No. 6 fuel oil. Combustion efficiency on our research boiler is {approx}63% for the heavy RCO fraction, lower than the combustion performance for previous co-coking fuel oils and No. 6 fuel oil. An additional coal has been procured and is being processed for the next series of delayed co-coking runs. Work continues on characterization of liquids and solids from co-coking of hydrotreated decant oils; liquid yields include more saturated and hydro- aromatics, while the coke quality varies depending on the conditions used. Pitch material is being generated from the heavy fraction of co-coking. Investigation of coal extraction as a method to produce RCO continues; the reactor modifications to filter the products hot and to do multi-stage extraction improve extraction yields from {approx}50 % to {approx}70%. Carbon characterization of co-cokes for use as various carbon artifacts continues.

  12. Refinery Integration of By-Products from Coal-Derived Jet Fuels

    SciTech Connect (OSTI)

    Caroline E. Burgess Clifford; Andre Boehman; Chunshan Song; Bruce Miller; Gareth Mitchell

    2007-03-17

    This report summarizes the accomplishments toward project goals during the no cost extension period of the third year of the project to assess the properties and performance of coal based products. These products are in the gasoline, diesel and fuel oil range and result from coal based jet fuel production from an Air Force funded program. Specific areas of progress include generation of coal based material that has been fractionated into the desired refinery cuts for a third round of testing, the use of a research gasoline engine to test coal-based gasoline, and modification of diesel engines for use in evaluating diesel produced in the project. At the pilot scale, the hydrotreating process was modified to separate the heavy components from the LCO and RCO fractions before hydrotreating in order to improve the performance of the catalysts in further processing. Hydrotreating and hydrogenation of the product has been completed, and due to removal of material before processing, yield of the jet fuel fraction has decreased relative to an increase in the gasoline fraction. Characterization of the gasoline fuel indicates a dominance of single ring alkylcycloalkanes that have a low octane rating; however, blends containing these compounds do not have a negative effect upon gasoline when blended in refinery gasoline streams. Characterization of the diesel fuel indicates a dominance of 3-ring aromatics that have a low cetane value; however, these compounds do not have a negative effect upon diesel when blended in refinery diesel streams. Both gasoline and diesel continue to be tested for combustion performance. The desulfurization of sulfur containing components of coal and petroleum is being studied so that effective conversion of blended coal and petroleum streams can be efficiently converted to useful refinery products. Activated carbons have proven useful to remove the heavy sulfur components, and unsupported Ni/Mo and Ni/Co catalysts have been very effective for hydrodesulfurization. Equipment is now in place to begin fuel oil evaluations to assess the quality of coal based fuel oil. Combustion and characterization of the latest fuel oil (the high temperature fraction of RCO from the latest modification) indicates that the fraction is heavier than a No. 6 fuel oil. Combustion efficiency on our research boiler is {approx}63% for the heavy RCO fraction, lower than the combustion performance for previous co-coking fuel oils and No. 6 fuel oil. Emission testing indicates that the coal derived material has more trace metals related to coal than petroleum, as seen in previous runs. An additional coal has been procured and is being processed for the next series of delayed co-coking runs. The co-coking of the runs with the new coal have begun, with the coke yield similar to previous runs, but the gas yield is lower and the liquid yield is higher. Characterization of the products continues. Work continues on characterization of liquids and solids from co-coking of hydrotreated decant oils; liquid yields include more saturated and hydro- aromatics, while the coke quality varies depending on the conditions used. Pitch material is being generated from the heavy fraction of co-coking.

  13. Refinery Integration of By-Products from Coal-Derived Jet Fuels

    SciTech Connect (OSTI)

    Caroline Clifford; Andre Boehman; Chunshan Song; Bruce Miller; Gareth Mitchell

    2008-03-31

    The final report summarizes the accomplishments toward project goals during length of the project. The goal of this project was to integrate coal into a refinery in order to produce coal-based jet fuel, with the major goal to examine the products other than jet fuel. These products are in the gasoline, diesel and fuel oil range and result from coal-based jet fuel production from an Air Force funded program. The main goal of Task 1 was the production of coal-based jet fuel and other products that would need to be utilized in other fuels or for non-fuel sources, using known refining technology. The gasoline, diesel fuel, and fuel oil were tested in other aspects of the project. Light cycle oil (LCO) and refined chemical oil (RCO) were blended, hydrotreated to removed sulfur, and hydrogenated, then fractionated in the original production of jet fuel. Two main approaches, taken during the project period, varied where the fractionation took place, in order to preserve the life of catalysts used, which includes (1) fractionation of the hydrotreated blend to remove sulfur and nitrogen, followed by a hydrogenation step of the lighter fraction, and (2) fractionation of the LCO and RCO before any hydrotreatment. Task 2 involved assessment of the impact of refinery integration of JP-900 production on gasoline and diesel fuel. Fuel properties, ignition characteristics and engine combustion of model fuels and fuel samples from pilot-scale production runs were characterized. The model fuels used to represent the coal-based fuel streams were blended into full-boiling range fuels to simulate the mixing of fuel streams within the refinery to create potential 'finished' fuels. The representative compounds of the coal-based gasoline were cyclohexane and methyl cyclohexane, and for the coal-base diesel fuel they were fluorine and phenanthrene. Both the octane number (ON) of the coal-based gasoline and the cetane number (CN) of the coal-based diesel were low, relative to commercial fuels ({approx}60 ON for coal-based gasoline and {approx}20 CN for coal-based diesel fuel). Therefore, the allowable range of blending levels was studied where the blend would achieve acceptable performance. However, in both cases of the coal-based fuels, their ignition characteristics may make them ideal fuels for advanced combustion strategies where lower ON and CN are desirable. Task 3 was designed to develop new approaches for producing ultra clean fuels and value-added chemicals from refinery streams involving coal as a part of the feedstock. It consisted of the following three parts: (1) desulfurization and denitrogenation which involves both new adsorption approach for selective removal of nitrogen and sulfur and new catalysts for more effective hydrotreating and the combination of adsorption denitrogenation with hydrodesulfurization; (2) saturation of two-ring aromatics that included new design of sulfur resistant noble-metal catalysts for hydrogenation of naphthalene and tetralin in middle distillate fuels, and (3) value-added chemicals from naphthalene and biphenyl, which aimed at developing value-added organic chemicals from refinery streams such as 2,6-dimethylnaphthalene and 4,4{prime}-dimethylbiphenyl as precursors to advanced polymer materials. Major advances were achieved in this project in designing the catalysts and sorbent materials, and in developing fundamental understanding. The objective of Task 4 was to evaluate the effect of introducing coal into an existing petroleum refinery on the fuel oil product, specifically trace element emissions. Activities performed to accomplish this objective included analyzing two petroleum-based commercial heavy fuel oils (i.e., No. 6 fuel oils) as baseline fuels and three co-processed fuel oils, characterizing the atomization performance of a No. 6 fuel oil, measuring the combustion performance and emissions of the five fuels, specifically major, minor, and trace elements when fired in a watertube boiler designed for natural gas/fuel oil, and determining the boiler performance when firing the five fuels. Two

  14. Future Competitive Positioning of Electric Utilities and their Customers 

    E-Print Network [OSTI]

    Schrock, D.; Parker, G.; Baechler, M.

    1995-01-01

    partnerships with their industrial customers to monitor and manage energy consumption, material flows, and environmental performance....

  15. Soot and SO[subscript 2] contribution to the supersites in the MILAGRO campaign from elevated flares in the Tula Refinery

    E-Print Network [OSTI]

    Molina, Luisa Tan

    This work presents a simulation of the plume trajectory emitted by flaring activities of the Miguel Hidalgo Refinery in Mexico. The flame of a representative sour gas flare is modeled with a CFD combustion code in order ...

  16. Customer Load Eligibility Guidelines (CLEG), April 2015

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding inCustomer-Comments Sign In About | CUSTOMER LOAD

  17. PEMEX selects the H-Oil{reg_sign} process for their hydrodesulfurization residue complex at the Miguel Hidalgo Refinery

    SciTech Connect (OSTI)

    Wisdom, L.I.; Colyar, J.J. [Hydrocarbon Research, Inc., Princeton, NJ (United States)

    1995-12-31

    Petroleos Mexicanos (PEMEX) has selected the H-Oil Process for the conversion and upgrading of a blend of Maya and Isthmus vacuum residua at the Miguel Hidalgo Refinery. The 8,450 metric ton/day (50,000 bpsd) H-Oil Plant will produce a low sulfur (0.8 wt%) fuel oil, diesel, naphtha, and LPG. The H-Oil Plant will be a key component of the Hydrodesulfurization Residue (HDR) Complex which will be located at the Miguel Hidalgo Refinery in Tula, State of Hidalgo, Mexico. The project is part of PEMEX`s Ecology Projects currently underway in Mexico. This paper describes the HDR Complex and the design basis of the H-Oil Plant and provides the current status of this project.

  18. Production of ethanol from refinery waste gases. Phase 3. Engineering development. Annual report, April 1, 1995--May 15, 1996

    SciTech Connect (OSTI)

    Arora, D.; Basu, R.; Phillips, J.R.; Wikstrom, C.V.; Clausen, E.C; Gaddy, J.L.

    1996-11-01

    Refineries discharge large volumes of H2, CO, and CO 2 from cracking, coking, and hydrotreating operations. This R&D program seeks to develop, demonstrate, and commercialize a biological process for converting these waste gases into ethanol for blending with gasoline. A 200,000 BPD refinery could produce up to 38 million gallons ethanol per year. The program is being conducted in 3 phases: II, technology development; III, engineering development; and IV, demonstration. Phase I, exploratory development, has been completed. The research effort has yielded two strains (Isolates O-52 and C-01) which are to be used in the pilot studies to produce ethanol from CO, CO2, and H2 in petroleum waste gas. Results from single continuous stirred tank reactor (CSTR) laboratory tests have shown that 20-25 g/L ethanol can be produced with < 5 g/L acetic acid byproduct. Laboratory studies with two CSTRs in series have yielded ethanol concentrations of 30-35 g/L with 2-4 g/L acetic acid byproduct. Water recycle from distillation back to the fermenter shows that filtration of the water before distillation eliminates the recycle of toxic materials back to the fermenter. Product recovery in the process will use direct distillation to the azeotrope, followed by adsorption to produce neat ethanol. This is less energy intensive than e.g. solvent extraction, azeotropic distillation, or pervaporation. Economic projections are quite attractive; the economics are refinery stream dependent and thus vary depending on refinery location and operation.

  19. Templates and Examples — Customer Profiles and Personas

    Broader source: Energy.gov [DOE]

    Here you will find custom templates and EERE-specific examples you can use to plan, conduct, and report on your usability and analysis activities. These templates are examples of forms you might use, but you are not required to use them for EERE products.

  20. Applying vitrification to meet customers` values

    SciTech Connect (OSTI)

    Roy, B. [Scientific Ecology Group, Inc., Oak Ridge, TN (United States)

    1996-03-01

    Cost-effective waste management solutions that maximize customer value require a thorough and flexible evaluation and integration of approaches, technology applications, and disposal options. This is particulary true in the application of vitrification to low-level radioactive and mixed waste stabilization. Case-specific evaluations are the required to determine the highest value, most cost-effective approaches.

  1. Industry Analysis and Customer Segmentation Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    : A leading health care company, serving more than 75 million people worldwide. Our family of companiesIndustry Analysis and Customer Segmentation Company Description: Our company specializes will research geographic market share by brand/company. The final deliverable will be a prioritized list

  2. Carbon Capture and Sequestration from a Hydrogen Production Facility in an Oil Refinery

    SciTech Connect (OSTI)

    Engels, Cheryl; Williams, Bryan, Valluri, Kiranmal; Watwe, Ramchandra; Kumar, Ravi; Mehlman, Stewart

    2010-06-21

    The project proposed a commercial demonstration of advanced technologies that would capture and sequester CO2 emissions from an existing hydrogen production facility in an oil refinery into underground formations in combination with Enhanced Oil Recovery (EOR). The project is led by Praxair, Inc., with other project participants: BP Products North America Inc., Denbury Onshore, LLC (Denbury), and Gulf Coast Carbon Center (GCCC) at the Bureau of Economic Geology of The University of Texas at Austin. The project is located at the BP Refinery at Texas City, Texas. Praxair owns and operates a large hydrogen production facility within the refinery. As part of the project, Praxair would construct a CO2 capture and compression facility. The project aimed at demonstrating a novel vacuum pressure swing adsorption (VPSA) based technology to remove CO2 from the Steam Methane Reformers (SMR) process gas. The captured CO2 would be purified using refrigerated partial condensation separation (i.e., cold box). Denbury would purchase the CO2 from the project and inject the CO2 as part of its independent commercial EOR projects. The Gulf Coast Carbon Center at the Bureau of Economic Geology, a unit of University of Texas at Austin, would manage the research monitoring, verification and accounting (MVA) project for the sequestered CO2, in conjunction with Denbury. The sequestration and associated MVA activities would be carried out in the Hastings field at Brazoria County, TX. The project would exceed DOE?s target of capturing one million tons of CO2 per year (MTPY) by 2015. Phase 1 of the project (Project Definition) is being completed. The key objective of Phase 1 is to define the project in sufficient detail to enable an economic decision with regard to proceeding with Phase 2. This topical report summarizes the administrative, programmatic and technical accomplishments completed in Phase 1 of the project. It describes the work relative to project technical and design activities (associated with CO2 capture technologies and geologic sequestration MVA), and Environmental Information Volume. Specific accomplishments of this Phase include: 1. Finalization of the Project Management Plan 2. Development of engineering designs in sufficient detail for defining project performance and costs 3. Preparation of Environmental Information Volume 4. Completion of Hazard Identification Studies 5. Completion of control cost estimates and preparation of business plan During the Phase 1 detailed cost estimate, project costs increased substantially from the previous estimate. Furthermore, the detailed risk assessment identified integration risks associated with potentially impacting the steam methane reformer operation. While the Phase 1 work identified ways to mitigate these integration risks satisfactorily from an operational perspective, the associated costs and potential schedule impacts contributed to the decision not to proceed to Phase 2. We have concluded that the project costs and integration risks at Texas City are not commensurate with the potential benefits of the project at this time.

  3. Fuel-Flexible Combustion System for Refinery and Chemical Plant Process Heaters

    SciTech Connect (OSTI)

    Benson, Charles; Wilson, Robert

    2014-04-30

    This project culminated in the demonstration of a full-scale industrial burner which allows a broad range of “opportunity” gaseous fuels to be cost-effectively and efficiently utilized while generating minimal emissions of criteria air pollutants. The burner is capable of maintaining a stable flame when the fuel composition changes rapidly. This enhanced stability will contribute significantly to improving the safety and reliability of burner operation in manufacturing sites. Process heating in the refining and chemicals sectors is the primary application for this burner. The refining and chemical sectors account for more than 40% of total industrial natural gas use. Prior to the completion of this project, an enabling technology did not exist that would allow these energy-intensive industries to take full advantage of opportunity fuels and thereby reduce their natural gas consumption. Opportunity gaseous fuels include biogas (from animal and agricultural wastes, wastewater plants, and landfills) as well as syngas (from the gasification of biomass, municipal solid wastes, construction wastes, and refinery residuals). The primary challenge to using gaseous opportunity fuels is that their composition and combustion performance differ significantly from those of conventional fuels such as natural gas and refinery fuel gas. An effective fuel-flexible burner must accept fuels that range widely in quality and change in composition over time, often rapidly. In Phase 1 of this project, the team applied computational fluid dynamics analysis to optimize the prototype burner’s aerodynamic, combustion, heat transfer, and emissions performance. In Phase 2, full-scale testing and refinement of two prototype burners were conducted in test furnaces at Zeeco’s offices in Broken Arrow, OK. These tests demonstrated that the full range of conventional and opportunity fuels could be utilized by the project’s burner while achieving robust flame stability and very low levels of air pollutant emissions. In Phase 3, the team retrofitted three fuel-flexible burners into a fired heater at a Shell plant and demonstrated the project’s technology over a 6-month period. The project burners performed well during this period. They remain in commercial service at the Shell plant. Through this work, an improved understanding of flame stabilization mechanisms was gained. Also, methods for accommodating a wide range of fuel compositions were developed. This knowledge facilitated the commercialization of a new generation of burners that are suitable for the fuels of the future.

  4. Cracking of simulated oil refinery off-gas over a coal char, petroleum coke, and quartz

    SciTech Connect (OSTI)

    Yuan Zhang; Jin-hu Wu; Dong-ke Zhang

    2008-03-15

    The cracking of oil refinery off-gas, simulated with a gas mixture containing methane (51%), ethylene (21.4%), ethane (21.1%), and propane (6.5%), over a coal char, petroleum coke, and quartz, respectively, has been studied in a fixed bed reactor. The experiments were performed at temperatures between 850 and 1000{sup o}C and at atmospheric pressure. The results show that the conversions of all species considered increased with increasing temperature. Ethane and propane completely decomposed over all three bed materials in the temperature range investigated. However, the higher initial conversion rates of methane and ethylene cracking at all temperatures were observed only over the coal char and not on the petroleum coke and quartz, indicating a significant catalytic effect of the coal char on methane and ethylene cracking. Methane and ethylene conversions decreased with reaction time due to deactivation of the coal char by carbon deposition on the char surface and, in the later stage of a cracking experiment, became negative, suggesting that methane and ethylene had been formed during the cracking of ethane and propane. 16 refs., 13 figs., 2 tabs.

  5. Summary of the proceedings of the workshop on the refinery of the future

    SciTech Connect (OSTI)

    Not Available

    1994-06-01

    This report on the Workshop on the Refinery of the Future has been prepared for participants to provide them with a succinct summary of the presentations, deliberations, and discussions. In preparing the summary, we have striven to capture the key findings (conclusions) and highlight the issues and concerns raised during the plenary and breakout sessions. The presentation of the summary of the proceedings follows the final workshop agenda, which is given in Section I; each section is tabbed to facilitate access to specific workshop topics. The material presented relies heavily on the outline summaries prepared and presented by the Plenary Session Chairman and the Facilitators for each breakout group. These summaries are included essentially as presented. In addition, individuals were assigned to take notes during each session; these notes were used to reconstruct critical issues that were discussed in more detail. The key comments made by the participants, which tended to represent the range of views expressed relative to the issues, are presented immediately following the facilitator`s summary outline in order to convey the flavor of the discussions. The comments are not attributed to individuals, since in many instances they represent a composite of several similar views expressed during the discussion. The facilitators were asked to review the writeups describing the outcomes of their sessions for accuracy and content; their suggested changes were incorporated. Every effort has thus been made to reconstruct the views expressed as accurately as possible; however, errors and/or misinterpretations undoubtedly have occurred.

  6. New process technology already existing in your refinery: Hydroprocessing-FCC Synergy

    SciTech Connect (OSTI)

    Stanger, C.W. Jr.; Fletcher, R.; Johnson, C.; Reid, T. [Akzo Nobel Chemicals Inc., Houston, TX (United States)

    1996-12-01

    New processing technology is now available to improve refinery operating margins. The cost of this technology is minor if a refiner has a VGO or Resid hydrotreater and an FCCU. The primary requirement is changing the way work is done. Addition of new capital can be an optional step. The New technology is Hydroprocessing-FCC Synergy. Redirecting the work effort to operate, optimize, and budget the FCC pretreater, the FCC and any FCC post-treaters as one unit can optimize margins. Calculating the unit operating margins on the difference of FCC final product value minus the pretreater and FCC operating costs highlights the new technology`s enhanced profitability. The synergy connectiveness is made through the hydrocarbon flow and properties. Selecting the proper conditions and catalyst to complement each other`s performance is the technical key. This paper discusses the techniques for catalyst and operating condition selection. The concept of changing formulations with processing age is discussed. Finally a case study comparing Hydroprocessing-FCC Synergy versus classical non-synergistic approaches is presented, including the effect of new Hydroprocessing and FCC catalysts on the profitability increase.

  7. NEBRASKA PUBLIC POWER DISTRICT CUSTOMER MEETING ON ENERGY ALTERNATIVES

    E-Print Network [OSTI]

    customers value solar power? ..................................................................20 CumulativeNEBRASKA PUBLIC POWER DISTRICT CUSTOMER MEETING ON ENERGY ALTERNATIVES SUMMARY OF RESULTS August 19 megawatts of wind power would you like to see NPPD build by the year 2010

  8. Paying with money or effort: Pricing when customers anticipate hassle

    E-Print Network [OSTI]

    Lambrecht, Anja

    For many services, customers subscribe to long-term contracts. Standard economic theory suggests that customers evaluate a contract on the basis of its overall net benefits. the authors suggest that rather than evaluating ...

  9. U.S. Customs and Border Protection (CBP) Announces Automation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Customs and Border Protection (CBP) Announces Automation of Form I-94 ArrivalDeparture Record U.S. Customs and Border Protection (CBP) will begin automation of the I-94 records on...

  10. Inter-organizational information sharing of customer data in retail

    E-Print Network [OSTI]

    Tengberg, John C.F. (John Claes Fredrik)

    2013-01-01

    As massive online retailers are putting increasing pressure on the traditional brick-and-mortar retailers, new ways to compete for customers is needed. Identifying customers' behavior and understanding their needs could ...

  11. Using Mobile Applications to Generate Customer Demand Peer Exchange...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Using Mobile Applications to Generate Customer Demand Peer Exchange Call Using Mobile Applications to Generate Customer Demand Peer Exchange Call March 12, 2015 3:00PM to 4:3...

  12. Guideline For Retrieving Customer Usage Data From Utilities

    Broader source: Energy.gov [DOE]

    This webinar, held on Dec. 16, 2010, provides information for utilities interested in retrieving data on customer usage.

  13. Using Utility Information to Calibrate Customer Demand Management Behavior Models

    E-Print Network [OSTI]

    Using Utility Information to Calibrate Customer Demand Management Behavior Models Murat Fahrio ­ Madison Report PSerc 99­06 June 10, 1999 Abstract In times of stress customers can help a utility by means be optimized if the utility can estimate the outage or substitution costs of its customers. This report

  14. A Study of Customer Service, Customer Satisfaction and Service Quality in the Logistics Function of the UK Food Processing Industry 

    E-Print Network [OSTI]

    Grant, David Bruce

    The aim of this thesis is to test the importance and sufficiency of existing constructs of customer service, customer satisfaction and service quality in the logistics function of the UK food processing industry. These ...

  15. Economic impacts of oil spills: Spill unit costs for tankers, pipelines, refineries, and offshore facilities. [Task 1, Final report

    SciTech Connect (OSTI)

    Not Available

    1993-10-15

    The impacts of oil spills -- ranging from the large, widely publicized Exxon Valdez tanker incident to smaller pipeline and refinery spills -- have been costly to both the oil industry and the public. For example, the estimated costs to Exxon of the Valdez tanker spill are on the order of $4 billion, including $2.8 billion (in 1993 dollars) for direct cleanup costs and $1.125 billion (in 1992 dollars) for settlement of damages claims caused by the spill. Application of contingent valuation costs and civil lawsuits pending in the State of Alaska could raise these costs appreciably. Even the costs of the much smaller 1991 oil spill at Texaco`s refinery near Anacortes, Washington led to costs of $8 to 9 million. As a result, inexpensive waming, response and remediation technologies could lower oil spin costs, helping both the oil industry, the associated marine industries, and the environment. One means for reducing the impact and costs of oil spills is to undertake research and development on key aspects of the oil spill prevention, warming, and response and remediation systems. To target these funds to their best use, it is important to have sound data on the nature and size of spills, their likely occurrence and their unit costs. This information could then allow scarce R&D dollars to be spent on areas and activities having the largest impact. This report is intended to provide the ``unit cost`` portion of this crucial information. The report examines the three key components of the US oil supply system, namely, tankers and barges; pipelines and refineries; and offshore production facilities. The specific purpose of the study was to establish the unit costs of oil spills. By manipulating this key information into a larger matrix that includes the size and frequency of occurrence of oil spills, it will be possible` to estimate the likely future impacts, costs, and sources of oil spills.

  16. Custom Organic Electronics Out of the Printer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory of raregovAboutRecoveryplanningCoalSocialFrameworks AppliedCurrentInCustom

  17. Customer Services Handbook, 2010, Office of Administration

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p aDepartmentEnergyEveryCustomer Service Handbook March 2010 Message

  18. Contract Provisions and Ratchets: Utility Security or Customer Equity? 

    E-Print Network [OSTI]

    Penkala, B. A.

    1987-01-01

    basis, the use of ratchet provisions within a rate struc ture attempt to equitably recover these fixed costs on a monthly basis. By billing the customer for at least a certain percentage of their maximum demand in succeeding months, the customer... equitable to the consumer, but are necessary to avoid discrim ination within a customer class. It is possible for the utility to secure the same demand revenue in a yearly period without using a ratchet, but this pricing method would provide...

  19. Automated Process for the Fabrication of Highly Customized Thermally...

    Energy Savers [EERE]

    of Highly Customized Thermally Insulated Cladding Systems Addthis 1 of 2 Resin casting prototype Image: Worcester Polytechnic Institute 2 of 2 A project member completes...

  20. Using Mobile Applications to Generate Customer Demand | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Peer Exchange Call Series: Using Mobile Applications to Generate Customer Demand, Call Slides and Discussion Summary, March 12, 2015. Call Slides and Discussion Summary More...

  1. Programs Streamline Process, Add Customers More Quickly After...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Quickly After Implementing Evaluation Recommendations This document, from Hydro-Quebec Empower Programs, outlines how "Programs Streamline Process, Add Customers...

  2. V-152: Cisco Unified Customer Voice Portal (CVP) Multiple Vulnerabilit...

    Broader source: Energy.gov (indexed) [DOE]

    Multiple vulnerabilities have been reported in Cisco Unified Customer Voice Portal (CVP) PLATFORM: The vulnerabilities are reported in versions prior to 9.0.1 ES 11 ABSTRACT:...

  3. Ameren Illinois (Electric) - Custom, HVAC and Motor Business...

    Broader source: Energy.gov (indexed) [DOE]

    Water Heaters Chillers Heat Pumps Air conditioners Heat recovery Compressed air Motor VFDs Agricultural Equipment CustomOthers pending approval Other EE Tankless Water...

  4. Interim Report on Customer Acceptance, Retention, and Response...

    Office of Environmental Management (EM)

    were almost twice (21%) what they were for customers participating in Critical Peak Rebate (CPR) programs (11%). However, when automated controls were provided, peak demand...

  5. BPA, in partnership with its customer utilities, conducted an...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    an impact evaluation to assess savings and cost-effectiveness for custom projects and lighting calculators from 2012 and 2013. The evaluation was broken into nine major categories...

  6. Evaluating Electric Vehicle Charging Impacts and Customer Charging...

    Office of Environmental Management (EM)

    in annual sales of plug-in electric vehicles by 2023, which may substantially increase electricity usage and peak demand in high adoption areas. Understanding customer charging...

  7. Making the most of Responsive Electricity Customer. Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Making the most of Responsive Electricity Customer. Energy Efficiency and Demand Response: How do we make the most out of using less energy? Making the most of Responsive...

  8. Streamline Service Delivery via Customer Communication and Contractor...

    Broader source: Energy.gov (indexed) [DOE]

    It Simple from the Customer's Perspective - Residential Program Design Working Capital for Contractors How to Design and Market Energy Efficiency Programs to Specific Neighborhoods...

  9. New pilot saves customers money and reduces BPA reserve requirements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    increasing the electric grid's flexibility to absorb changes in wind energy generation and reducing costs for both the customers and BPA. Portland General Electric and...

  10. California Customer Load Reductions during the Electricity Crisis...

    Open Energy Info (EERE)

    California Customer Load Reductions during the Electricity Crisis: Did They Help to Keep the Lights On? Jump to: navigation, search Tool Summary LAUNCH TOOL Name: California...

  11. Customized hydroprocessing with SynSat

    SciTech Connect (OSTI)

    Suchanek, A.J. [Criterion Catalyst Co., L.P., Houston, TX (United States); Granniss, E.L. [ABB Lummus Crest Inc., Houston, TX (United States)

    1995-09-01

    Environmental pollution caused by diesel engines has long been a major irritant to the general population, if only by seeing that billowing black exhaust that has so typified diesel engine performance. The SynSat process was first conceptualized as a low cost approach to achieving aromatics reduction and deep desulfurization of diesel boiling range feeds. It has grown to 13 licenses so far and can produce a clean burning diesel fuel. The paper highlights a ``customized`` approach used to determine and solve the refiners` hydroprocessing problems with SynSat technology. A modification of the technology, SynShift, a selective ring opening process for production of lighter, higher quality diesel fuels, is also described.

  12. Final Report - Development of New Pressure Swing Adsorption (PSA) Technology to Recover High Valued Products from Chemical Plant and Refinery Waste Systems

    SciTech Connect (OSTI)

    Keith Ludwig

    2004-06-14

    Project Objective was to extend pressure swing adsorption (PSA) technology into previously under-exploited applications such as polyolefin production vent gas recovery and H2 recovery from refinery waste gases containing significant amounts of heavy hydrocarbons, aromatics, or H2S.

  13. Retail risk management pricing electricity to manage customer risk

    SciTech Connect (OSTI)

    Mauldin, M.G.

    1997-06-01

    In the environment of direct customer access and supplier choice that is coming, experience teaches that customers will value the opportunity to control their price risk in a variety of ways. Suppliers that are sensitive to this desire and the varied ways of meeting it will have a distinct advantage. Large electricity customers are clearly awaiting the day the monopoly floodgates open because they believe cheap electricity from alternate suppliers will become available to them. But access and choice will mean more to utility retail customers than just the potential availability of low cost power. It will mean that customers will have the purchasing power to demand exactly what they want from their electricity provider. Some customers will want the lowest cost power available, which may mean that they purchase directly from the spot market. Others will want to use their new-found clout to purchase power of a certain guaranteed quality or reliability level, or to purchase on a pricing plan that fits their needs. For instance, business customers that sell goods under fixed price contracts may want to purchase electricity at a price that is fixed for a certain period - perhaps a quarter of a year. This article focuses on products that protect customers from the price risk they would face if they purchased directly from the spot market. First, it will address examples of products that are used to protect against price risk in the gas market, because these products indicate the type of offerings that may help electric customers manage price risks. Next, the article will highlight findings on desires of customers in the electricity market, and provide an overview of utility tariffs that can help customers control their price risk. Finally, it will discuss approaches that can be used to price these retail risk management products.

  14. Customer Management and Control of Broadband VPN Services

    E-Print Network [OSTI]

    Columbia University

    . The architecture is aimed at giving the VPN customer a high level of control over the traffic on the VPN, following a customer's specific requirements. We have implemented a prototype of this architecture on a high- ment Architectures, Prototyping 1. INTRODUCTION Broadband technology has the potential to change

  15. GIS Programming and Customization GIS 6103 -Fall 2014

    E-Print Network [OSTI]

    Hill, Jeffrey E.

    GIS Programming and Customization GIS 6103 - Fall 2014 School of Forest Resources & Conservation _________________________________________________________________________________________ 1 GIS 6103 - GIS Programming and Customization INSTRUCTOR: Dr. Hartwig Henry HOCHMAIR Assistant conference meeting. REQUIRED READINGS: - Amirian, P. (2013). Beginning ArcGIS for Desktop Development using

  16. KNOWLEDGE DISCOVERY IN DATABASES FOR CUSTOMER RELATIONSHIP MANAGEMENT

    E-Print Network [OSTI]

    Spronck, Pieter

    sector in Egypt. This area of research is closely related to the research areas of Data Mining (DM of intelligent knowledge engineering in the banking sector in Egypt. KEYWORDS: Knowledge discovery in databases of new technologies, have contributed to the growth of customer's power. Customers may switch banks

  17. The New Era of Customer Service Edmund W. Schuster

    E-Print Network [OSTI]

    Brock, David

    The New Era of Customer Service Management Edmund W. Schuster Massachusetts Institute of Technology · Warehousing cost · Total Logistics Cost · Distribution cost as a percentage of sales · Sales accounting ?? #12 = 3 ­ 5 days Logistics cost as a percentage of Sales = 4 ­ 7% #12;New Methods of Customer Service

  18. Customer misuse of social media and consequences on firm strategies

    E-Print Network [OSTI]

    Al Hanbali, Ahmad

    consumers unprecedented control, information and power over the market process, posing retailers is a unique form of customer empowerment allowing customers to affect as never before the market power the end- consumers towards their own benefits and on the impact of such practices on the marketing

  19. Structured Custom Design of MEMS Devices Dr. Debjyoti Banerjee

    E-Print Network [OSTI]

    Banerjee, Debjyoti

    Structured Custom Design of MEMS Devices Dr. Debjyoti Banerjee Senior Consulting Engineer COVENTOR, Macro-model, Netlist, MEMS, CAD. ABSTRACT A top down design is essential to minimize time-to-market of MEMS devices. A structured custom design approach for MEMS design based on the concept of using

  20. Microsoft SQL Server TCO Study for SAP ERP Customers

    E-Print Network [OSTI]

    Chaudhuri, Surajit

    Microsoft SQL Server TCO Study for SAP ERP Customers White Paper Published: February 2009 Summary: By migrating an SAP ERP environment to Microsoft ® SQL Server ® , unplanned downtime could be reduced by over ERP Customers 1 Copyright The information contained in this document represents the current view

  1. Effective monitoring of non-chromate chemical treatment programs for refinery cooling systems using sewage water as make-up

    SciTech Connect (OSTI)

    AlMajnouni, A.D.; Jaffer, A.E. [Saudi Aramco, Dhahran (Saudi Arabia)

    1996-08-01

    Treated sewage water as make-up to the cooling tower requires novel approaches to control potential cooling water problems common to refineries besides meeting environmental regulations. An intensive field study was conducted to evaluate the effectiveness of non-chromate treatment programs. On-line cleaning of the exchangers occurred prior to instituting the new chemical treatment program. Low carbon steel corrosion rates with minimal deposition was achieved. Microbiological fouling was controlled with chlorination and non-oxidizing biocide program. Field results are presented which compare the efficacy of these proprietary treatments to control corrosion and inhibit scale and fouling. Analytical results which provide a comprehensive performance evaluation of a new non-chromate chemical treatment program are presented.

  2. Customizing pays off in steam generators

    SciTech Connect (OSTI)

    Ganapathy, V. (ABCO Industries, Inc., Abilene, TX (United States))

    1995-01-01

    Packaged steam generators are the workhorses of chemical process plants, power plants and cogeneration systems. They are available as oil- or gas-fired models, and are used to generate either high-pressure superheated steam (400 to 1,200 psig, at 500 to 900 F) or saturated steam at low pressures (100 to 300 psig). In today's emission- and efficiency- conscious environment, steam generators have to be custom designed. Gone are the days when a boiler supplier--or for that matter an end user--could look up a model number from a list of standard sizes and select one for a particular need. Thus, before selecting a system, it is desirable to know the features of oil- and gas-fired steam generators, and the important variables that influence their selection, design and performance. It is imperative that all of these data are supplied to the boiler supplier so that the engineers may come up with the right design. Some of the parameters which are discussed in this paper are: duty, steam temperature, steam purity, emissions, and furnace design. Superheaters, economizers, and overall performance are also discussed.

  3. Utilities Sell Lighting, Cooling and Heating to Large Customers 

    E-Print Network [OSTI]

    Horne, M. L.; Zien, H. B.

    1996-01-01

    The electric utility industry is entering an era of unprecedented competition. Competition from traditional sources such as natural gas companies, customer cogeneration, and independent power producers are being joined by new sources of competition...

  4. USAA: Organizing for Innovation and Superior Customer Service

    E-Print Network [OSTI]

    Ross, Jeanne W.

    2010-12-01

    USAA, a diversified financial services firm serving the U.S. military, had long been recognized for outstanding customer service. The company had never operated branches, instead providing services through remote channels, ...

  5. Small Business Customized Excerpts from the User’s Guide

    Office of Energy Efficiency and Renewable Energy (EERE)

    Small Business Customized Excerpts from the User’s Guide, to assist in the process for applying to the Small Business Innovation Research (SBIR) program of the U.S. Department of Energy.

  6. Revamping luxury : mass customization applied to the luxury goods market

    E-Print Network [OSTI]

    Edouard, Mélissa Susan Caroline Coleman

    2009-01-01

    This thesis seeks to understand how the crisis has impacted the definition of luxury goods in the mind of consumers and the implications this has for luxury goods companies. It also aims to present Mass Customization as ...

  7. Device-oriented telecommunications customer call center demand forecasting

    E-Print Network [OSTI]

    Koul, Ashish, 1979-

    2014-01-01

    Verizon Wireless maintains a call center infrastructure employing more than 15,000 customer care representatives across the United States. The current resource management process requires a lead time of several months to ...

  8. Midas: Fabricating Custom Capacitive Touch Sensors to Prototype Interactive Objects

    E-Print Network [OSTI]

    O'Brien, James F.

    . While digital fabrication techniques such as 3D printing make it easier to prototype the shape of custom processes like 3D printing and CNC ma- chining make it easier to prototype the form of such products

  9. June 15, 2015 Dear NIST Measurement Services Customer,

    E-Print Network [OSTI]

    June 15, 2015 Dear NIST Measurement Services Customer, The National Institute of Standards and disseminating national metrology standards ­ realizations of the International System of Units (SI) - for the basic measurement quantities, and for many derived measurement quantities. Measurement results

  10. Pluggable type-checking for custom type qualifiers in Java

    E-Print Network [OSTI]

    Papi, Matthew M.

    2007-09-17

    We have created a framework for adding custom type qualifiers to the Javalanguage in a backward-compatible way. The type system designer definesthe qualifiers and creates a compiler plug-in that enforces theirsemantics. ...

  11. BPA customers get insider view of FCRPS dam operations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    wonder and respect. That energy was abundant among a group of about 50 Northwest public power customers who spent a day exploring McNary Dam, a U.S. Army Corps of Engineers'...

  12. A methodology to assess cost implications of automotive customization

    E-Print Network [OSTI]

    Fournier, Laëtitia

    2005-01-01

    This thesis focuses on determining the cost of customization for different components or groups of components of a car. It offers a methodology to estimate the manufacturing cost of a complex system such as a car. This ...

  13. Owner/Operator Perspective on Reliability Customer Needs and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SERVICES AS RELIABLE AS THE SUN OwnerOperator Perspective on Reliability Customer Needs and Field Data Sandia National Laboratories Utility-Scale Grid-Tied PV Inverter Reliability...

  14. Custom Reduction of Arithmetic in Linear DSP Transforms

    E-Print Network [OSTI]

    Kepner, Jeremy

    . Püschel Dept. of Electrical and Computer Engineering Carnegie Mellon University #12;HPEC 2003, Slide 2 custom low-cost algorithm search for cheapest const. reduction satisfying Q algorithm manipulation

  15. Custom power supply interface for teaching circuit design

    E-Print Network [OSTI]

    Madrigal, Ruben E. (Ruben Esteban)

    2014-01-01

    This thesis discusses the design and implementation of a custom power supply interface for the Pioneer mobile robot used in MIT's 6.01 course, "Introduction to Electrical Engineering and Computer Science." The interface ...

  16. High temperature solid oxide fuel cell: Customer test units

    SciTech Connect (OSTI)

    Ray, E.R.; Veyo, S.E.

    1993-11-01

    There are three 25-kW class SOFC customer test unit programs; two are in Japan (utility joint ventures), one for Southern California Edison Co. The two in Japan are described: Startup, testing, modifications, and operational performance are discussed.

  17. Smart customization : making evidence-based environmental decisions

    E-Print Network [OSTI]

    Chin, Ryan C. C., 1974-

    2012-01-01

    This thesis examines the environmental benefits created by the manufacture, distribution, and consumer use of products that are mass customized (MC) or produced "on-demand" and tailored to individual end-user preferences. ...

  18. 2001 FEMP Customer Survey Study Report: April 2002

    SciTech Connect (OSTI)

    None

    2009-01-18

    This summary presents the key findings and recommendations from the 2001 FEMP customer survey. The key findings presented in this summary are a condensed presentation of the more detailed findings presented in each of the chapters.

  19. DOE Zero Energy Ready Home Case Study: Sterling Brook Custom...

    Energy Savers [EERE]

    Zero Energy Ready home in Double Oak, TX, north of Dallas, that scored a HERS 44 without PV. The 3,752-ft2 two-story home served as an energy-efficient model home for the custom...

  20. Eastport Customs Brokers Win Small Business Award | Jefferson...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to starting their business in 1985, Jennings worked as a customs broker for 17 years at a company owned by her family. Adams worked in importing for a Norfolk shipping agent for 25...

  1. Quantifying the impact of customer allocations on supply chain performance

    E-Print Network [OSTI]

    Sheth, Neel

    2012-01-01

    This project investigates the impact that customer allocations have on key cost and service indicators at Intel Corporation. Allocations provide a method to fill orders during constrained supply, when total demand for a ...

  2. Improving customer service level through centralized supply flexibility

    E-Print Network [OSTI]

    Hsu, Mindy H. (Mindy Hsin-Min)

    2006-01-01

    This thesis explores a combined application of Supply Chain Management theory for centralized and decentralized distribution systems and Customer Relationship Management techniques in data mining to solve the challenges ...

  3. Cost-Effective, Customer-Focused, and Contractor-Focused Data...

    Energy Savers [EERE]

    Cost-Effective, Customer-Focused, and Contractor-Focused Data Tracking Systems Cost-Effective, Customer-Focused, and Contractor-Focused Data Tracking Systems Better Buildings...

  4. Microgrid modeling using the stochastic Distributed Energy Resources Customer Adoption Model DER-CAM

    E-Print Network [OSTI]

    Stadler, Michael

    2014-01-01

    using the stochastic Distributed Energy Resources CustomerEnergy Reliability, Distributed Energy Program of the U.S.Lab • Motivation • The Distributed Energy Resources Customer

  5. Implementing an Energy Management System at TOTAL Prot Arthur Refinery: The process to improving and sustaining energy efficiency performance at a facility. 

    E-Print Network [OSTI]

    Hoyle, A.

    2013-01-01

    INFORMATION? 2011 KBC Advanced Technologies plc. All Rights Reserved. Implementing an Energy Management System at TOTAL Port Arthur Refinery: The process to improving and sustaining energy efficiency performance at a facility May 2013 Andy Hoyle, Senior... ? Best Practices and Procedures ? Execute Opportunities ? Track Financial and Economic Benefits 6 weeks 12 weeks >12 weeks Implement Quick Wins OBJECTIVE: SUSTAINED IMPROVEMENT IN ENERGY EFFICIENCY May 2013 ESL-IE-13-05-14 Proceedings...

  6. Carbon Capture and Sequestration (via Enhanced Oil Recovery) from a Hydrogen Production Facility in an Oil Refinery

    SciTech Connect (OSTI)

    Stewart Mehlman

    2010-06-16

    The project proposed a commercial demonstration of advanced technologies that would capture and sequester CO2 emissions from an existing hydrogen production facility in an oil refinery into underground formations in combination with Enhanced Oil Recovery (EOR). The project is led by Praxair, Inc., with other project participants: BP Products North America Inc., Denbury Onshore, LLC (Denbury), and Gulf Coast Carbon Center (GCCC) at the Bureau of Economic Geology of The University of Texas at Austin. The project is located at the BP Refinery at Texas City, Texas. Praxair owns and operates a large hydrogen production facility within the refinery. As part of the project, Praxair would construct a CO2 capture and compression facility. The project aimed at demonstrating a novel vacuum pressure swing adsorption (VPSA) based technology to remove CO2 from the Steam Methane Reformers (SMR) process gas. The captured CO2 would be purified using refrigerated partial condensation separation (i.e., cold box). Denbury would purchase the CO2 from the project and inject the CO2 as part of its independent commercial EOR projects. The Gulf Coast Carbon Center at the Bureau of Economic Geology, a unit of University of Texas at Austin, would manage the research monitoring, verification and accounting (MVA) project for the sequestered CO2, in conjunction with Denbury. The sequestration and associated MVA activities would be carried out in the Hastings field at Brazoria County, TX. The project would exceed DOE’s target of capturing one million tons of CO2 per year (MTPY) by 2015. Phase 1 of the project (Project Definition) is being completed. The key objective of Phase 1 is to define the project in sufficient detail to enable an economic decision with regard to proceeding with Phase 2. This topical report summarizes the administrative, programmatic and technical accomplishments completed in Phase 1 of the project. It describes the work relative to project technical and design activities (associated with CO2 capture technologies and geologic sequestration MVA), and Environmental Information Volume. Specific accomplishments of this Phase include: 1. Finalization of the Project Management Plan 2. Development of engineering designs in sufficient detail for defining project performance and costs 3. Preparation of Environmental Information Volume 4. Completion of Hazard Identification Studies 5. Completion of control cost estimates and preparation of business plan During the Phase 1 detailed cost estimate, project costs increased substantially from the previous estimate. Furthermore, the detailed risk assessment identified integration risks associated with potentially impacting the steam methane reformer operation. While the Phase 1 work identified ways to mitigate these integration risks satisfactorily from an operational perspective, the associated costs and potential schedule impacts contributed to the decision not to proceed to Phase 2. We have concluded that the project costs and integration risks at Texas City are not commensurate with the potential benefits of the project at this time.

  7. Influence of a combustion-driven oscillation on global mixing in the flame from a refinery flare

    SciTech Connect (OSTI)

    Langman, A.S.; Nathan, G.J.

    2011-01-15

    An assessment of the influence of strong combustion-driven oscillations on mixing rates and visible radiation in the flame from a full-scale refinery flare is reported. Importantly, the oscillations were generated naturally, with no external forcing, and at a high Reynolds number of 4 x 10{sup 6}. These conditions differentiate this study from those of previous investigations, which all involved some external forcing and were at a Re too low to ensure fully turbulent flow within the flame. A frame-by-frame analysis of video footage, providing good resolution of the instantaneous edge of each flame, was used to assess flame dimensions, and so to determine a global residence time. Since the flames are in the fast-chemistry regime, the visual imagers can be used to determine a global mixing rate. The analysis reveals a consistent picture that the combustion-driven oscillations do not result in a significant change to the global mixing rate, but do increase the visible radiation. This is in contrast to previous investigations, using externally forced jets, where forcing at the preferred mode has been found to increase mixing rates and reduce radiation. (author)

  8. Strategic planning for and implementation of reclaimed municipal waste water as make-up to a refinery cooling system

    SciTech Connect (OSTI)

    Francis, W.R.; Mazur, J.J.; Rao, N.M.

    1996-08-01

    This paper discusses the successful use of treated municipal plant waste water effluent (Title 22) in a refinery cooling water system. Conversion from well water to this make-up water source was preceded by developing a carefully crafted transition plan. Steps were taken to identify key system performance indicators, establish desired performance goals, and implement stringent monitoring and control protocols. In addition, all possible contingencies were considered and solutions developed. Treating Title 22 waters is very challenging and entails risks not associated with normal makeup waters. Several novel on-line monitoring and control tools are available which help minimize these risks while enhancing tower operation. Performance monitoring of critical system parameters is essential in order to provide early warning of problems so that corrective measures can be implemented. In addition, a high level of system automation enhances reliable operation. Corrosion, scaling and microbiological performance of the system with Title 22 water is discussed in comparison to previous well water make-up.

  9. Methanol production from eucalyptus wood chips. Attachment III. Florida's eucalyptus energy farm and methanol refinery: the background environment

    SciTech Connect (OSTI)

    Fishkind, H.H.

    1982-04-01

    A wide array of general background information is presented on the Central Florida area in which the eucalyptus energy plantation and methanol refinery will be located. Five counties in Central Florida may be affected by the project, DeSoto, Hardee, Hillsborough, Manatee, and Polk. The human resources of the area are reviewed. Included are overviews of population demographic and economic trends. Land use patterns and the transportation are system described, and the region's archeological and recreational resources are evaluated. The region's air quality is emphasized. The overall climate is described along with noise and air shed properties. An analysis of the region's water resources is included. Ground water is discussed first followed by an analysis of surface water. Then the overall quality and water supply/demand balance for the area is evaluated. An overview of the region's biota is presented. Included here are discussions of the general ecosystems in Central Florida, and an analysis of areas with important biological significance. Finally, land resources are examined.

  10. Refinery Yield of Liquefied Refinery Gases

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a.CORPORATION /AnalysisProduct:

  11. Study of behavior and determination of customer lifetime value(CLV) using Markov chain model

    SciTech Connect (OSTI)

    Permana, Dony, E-mail: donypermana@students.itb.ac.id [Statistics Research Division, Faculty of Mathematics and Natural Science, Bandung Institute of Technology, Indonesia and Statistics Study Program, Faculty of Mathematics and Natural Sciences, Padang State University (Indonesia); Indratno, Sapto Wahyu; Pasaribu, Udjianna S. [Statistics Research Division, Faculty of Mathematics and Natural Science, Bandung Institute of Technology (Indonesia)

    2014-03-24

    Customer Lifetime Value or CLV is a restriction on interactive marketing to help a company in arranging financial for the marketing of new customer acquisition and customer retention. Additionally CLV can be able to segment customers for financial arrangements. Stochastic models for the fairly new CLV used a Markov chain. In this model customer retention probability and new customer acquisition probability play an important role. This model is originally introduced by Pfeifer and Carraway in 2000 [1]. They introduced several CLV models, one of them only involves customer and former customer. In this paper we expand the model by adding the assumption of the transition from former customer to customer. In the proposed model, the CLV value is higher than the CLV value obtained by Pfeifer and Caraway model. But our model still requires a longer convergence time.

  12. Homomorphicity and non-coreness of labeled posets are NP-complete

    E-Print Network [OSTI]

    Földes, Stephan

    -posets is a universal distributive lattice [14]. Institute of Mathematics, Tampere University of Technology, P.O. Box 553, FI-33101 Tampere, Finland. Email: erkko.lehtonen@tut.fi. 1 #12;In the current paper, we represent

  13. Volume 2, Number 1 41 World Customs Journal

    E-Print Network [OSTI]

    Proverb Abstract Africa's economic development partly depends on reduction of trade transaction costs SOLUTIONS Creck Buyonge and Irina Kireeva1 There is always something new out of Africa. Pliny the Elder implemented initiatives that have led to improvement of trade facilitation. In this regard, customs reform

  14. Customized optimization of metabolic pathways by combinatorial transcriptional engineering

    E-Print Network [OSTI]

    Zhao, Huimin

    Engineering, Institute for Genomic Biology and 2 Departments of Chemistry, Biochemistry and BioengineeringCustomized optimization of metabolic pathways by combinatorial transcriptional engineering Jing Du1, 2012; Accepted May 15, 2012 ABSTRACT A major challenge in metabolic engineering and syn- thetic biology

  15. Pin: Building Customized Program Analysis Tools with Dynamic Instrumentation

    E-Print Network [OSTI]

    Hazelwood, Kim

    Pin: Building Customized Program Analysis Tools with Dynamic Instrumentation Chi-Keung Luk Robert.project@intel.com Abstract Robust and powerful software instrumentation tools are essential for program analysis tasks instrumentation system called Pin. Our goals are to pro- vide easy-to-use, portable, transparent, and efficient

  16. Control on Demand Customizing Control for Each Application

    E-Print Network [OSTI]

    Bhattacharjee, Samrat "Bobby"

    1 Control on Demand Customizing Control for Each Application Abstract Control on demand significant progress has been made in integrated network transport now offering ``bandwidth on demand control needs. In this paradigm paper we propose an architecture for control on demand. We de­ fine

  17. Product-Line-Based Requirements Customization for Web Service Compositions

    E-Print Network [OSTI]

    Lutz, Robyn R.

    Product-Line-Based Requirements Customization for Web Service Compositions Hongyu Sun1 , Robyn Lutz composite web services by incorporating a software product-line engineering approach into web-service the resulting web- service compositions. By first creating a web-service composition search space that satisfies

  18. Customizing AOSE Methodologies by Reusing AOSE Thomas Juan Leon Sterling

    E-Print Network [OSTI]

    Mascardi, Viviana

    Customizing AOSE Methodologies by Reusing AOSE Features Thomas Juan Leon Sterling Department of Computer Science and Software Engineering, The University of Melbourne 221 Bouverie Street Carlton engineering support for a diverse range of software quality attributes, such as privacy and openness

  19. Process for Managing and Customizing HPC Operating Systems

    SciTech Connect (OSTI)

    Brown, David ML

    2014-04-02

    A process for maintaining a custom HPC operating system was developed at the Environmental Molecular Sciences Laboratory (EMSL) over the past ten years. This process is generic and flexible to manage continuous change as well as keep systems updated while managing communication through well defined pieces of software.

  20. Exploring big data opportunities for Online Customer Segmentation

    E-Print Network [OSTI]

    Utrecht, Universiteit

    Exploring big data opportunities for Online Customer Segmentation Georgia Fotaki Marco Spruit Sjaak University P.O. Box 80.089 3508 TB Utrecht The Netherlands #12;iii Exploring big data opportunities and analyzing the huge amount of data; and this is where the concept of "Big Data" can play an essential role

  1. November 22, 2013 Dear NIST Measurement Services Customer,

    E-Print Network [OSTI]

    standards ­ realizations of the International System of Units (SI) - for the basic measurement quantitiesNovember 22, 2013 Dear NIST Measurement Services Customer, The National Institute of Standards and Technology (NIST), U.S. Department of Commerce, is the agency of the United States Federal Government

  2. Classifying Web Search Queries to Identify High Revenue Generating Customers

    E-Print Network [OSTI]

    Jansen, James

    searching, the set of terms for which a user searches is called the query. If a user enters a query and then clicks on a result, these query terms are embedded within the URL that is passed from the search engineClassifying Web Search Queries to Identify High Revenue Generating Customers Adan Ortiz-Cordova 329

  3. Research Article A Customization of the Arc Marine Data

    E-Print Network [OSTI]

    Wright, Dawn Jeannine

    Research Article A Customization of the Arc Marine Data Model to Support Whale Tracking via Mate Marine Mammal Institute, Oregon State University Dawn J Wright Department of Geosciences Oregon State University Tomas Follett Marine Mammal Institute, Oregon State University Abstract The Arc Marine

  4. Chevron: Refinery Identifies $4.4 Million in Annual Savings by Using Process Simulation Models to Perform Energy-Efficiency Assessment

    SciTech Connect (OSTI)

    2004-05-01

    In an energy-efficiency study at its refinery near Salt Lake City, Utah, Chevron focused on light hydrocarbons processing. The company found it could recover hydrocarbons from its fuel gas system and sell them. By using process simulation models of special distillation columns and associated reboilers and condensers, Chevron could predict the performance of potential equipment configuration changes and process modifications. More than 25,000 MMBtu in natural gas could be saved annually if a debutanizer upgrade project and a new saturated gas plant project were completed. Together, these projects would save $4.4 million annually.

  5. Conceptual design assessment for the co-firing of bio-refinery supplied lignin project. Quarterly report, June 23--July 1, 2000

    SciTech Connect (OSTI)

    Berglund, T.; Ranney, J.T.; Babb, C.L.

    2000-07-27

    The Conceptual Design Assessment for the Co-Firing of Bio-Refinery Supplied Lignin Project was successfully kicked off on July 23, 2000 during a meeting at the TVA-PPI facility in Muscle Shoals, AL. An initial timeline for the study was distributed, issues of concern were identified and a priority actions list was developed. Next steps include meeting with NETL to discuss de-watering and lignin fuel testing, the development of the mass balance model and ethanol facility design criteria, providing TVA-Colbert with preliminary lignin fuel analysis and the procurement of representative feed materials for the pilot and bench scale testing of the hydrolysis process.

  6. Southern California Edison`s approach to improving office energy use among its customers

    SciTech Connect (OSTI)

    Duvall-Ward, J.

    1995-12-01

    Southern California Edison (SCE) has 500,000 commercial/industrial/agriculturaI customers and 3.6 million residential customers. As part of a continuing effort to develop programs which encourage customers to use energy-efficient technology, SCE began exploring ways to improve office energy use by its customers. The utility examined the type of equipment it should pursue with the customers, the potential energy savings, and the percent of influence SCE thought it could have on the customer. The program was implemented on August 2, 1994.

  7. Data breaches of personal customer information have caused legislation to be enacted to better protect customer personal

    E-Print Network [OSTI]

    Fisher, Kathleen

    Organization for Standardization 27001 (ISO27001) and 16 Code of Federal Regulations (CFR) 314 (Standards certifications, which enables us to certify our assessment results. This confirms that the customer's security of the certification includes a confirmation that the data was correctly protected during the assessment, as normally

  8. Design and fabrication of retrofit e-bike powertrain and custom lithium-ion battery pack

    E-Print Network [OSTI]

    Wang, Helena

    2015-01-01

    A chopper-style bicycle was converted to a functional e-bike with electric powertrain, involving a hub motor, a custom power source, and throttle speed control. A custom battery pack was designed to meet system performance ...

  9. Helping C&I Customers to Get C.L.E.A.N 

    E-Print Network [OSTI]

    Williams, J.; Beames, B.

    1995-01-01

    Power Research Institute's (EPRI) tailored collaborative, TVA has customized CLEAN -Comprehensive Least Emissions ANalysis --to assist its C&I customers. CLEAN is a database and software tool for calculating the comprehensive emissions from end...

  10. Customer Behavior Modeling in Revenue Management and Auctions: A Review and New Research

    E-Print Network [OSTI]

    Shen, Zuo-Jun "Max"

    practical problems, neglecting these decision processes on the demand side may have significantCustomer Behavior Modeling in Revenue Management and Auctions: A Review and New Research Invited Paper for Production and Operations Management Abstract Customer behavior modeling has been

  11. Impact of Information and Communications Technologies on Residential Customer Energy Services

    E-Print Network [OSTI]

    Goldman, C.; Kempton, W.; Eide, A.; Iyer, M.; Farber, M.; Scheer, R.

    1996-01-01

    more unique services is the Energy Saver Module offered bythis option); ! An energy saver module, which customers canCustomers can add on the energy saver module, which permits

  12. Considering the customer : determinants and impact of using technology on industry evolution

    E-Print Network [OSTI]

    Kahl, Steven J. (Steven John)

    2007-01-01

    This dissertation raises two questions: How do customers come to understand and use a technology? What is the influence of customers using a technology on industry evolution and competition? I use two historical cases to ...

  13. DOE Zero Energy Ready Home Case Study: BPC Green Builders, Custom...

    Energy Savers [EERE]

    Study: BPC Green Builders, Custom Home, New Fairfield, CT DOE Zero Energy Ready Home Case Study: BPC Green Builders, Custom Home, New Fairfield, CT Case study of a DOE Zero Energy...

  14. Identifying system-wide contact center cost reduction opportunities through lean, customer-focused IT metrics

    E-Print Network [OSTI]

    Sen, Avijit

    2009-01-01

    Dell's long-term success depends on its customers' future buying patterns. These patterns are largely determined by customers' satisfaction with the after-sales service they receive. Previously, Dell has been able to deliver ...

  15. Instill Customer Confidence Control Costs Manage Business Growth Manage Operational and Business Risk

    E-Print Network [OSTI]

    Doty, Sharon Lafferty

    ! " # $# ! % " & ' " ( ) ( * + ( Instill Customer Confidence Control Costs Manage Business Growth Portfolios Monitor Customer Satisfaction Manage Cost of Capital , * + * - . Advise and Consult Develop Staff to deliver outstanding service anywhere, anytime Values: Collaboration · Diversity · Excellence · Innovation

  16. Creating supply chain visibility : a case study on extending Intel's Unit Level Traceability to customers

    E-Print Network [OSTI]

    Kang, Annie

    2012-01-01

    In an effort to enable supply chain visibility for Intel products, the Customer Unit Level Traceability (ULT) Program was formed to help extend Intel's ULT capability to the customer level. Increased traceability of Intel ...

  17. Analysis of new approaches to improve the customer responsiveness of Intel's microprocessor supply chain

    E-Print Network [OSTI]

    Chow, Jim, 1972-

    2004-01-01

    Intel Corporation is looking to strengthen its long-term competitive armor by engaging in new initiatives to develop world-class customer service and build strong customer loyalty. A company's supply chain design and ...

  18. Distributed energy resources customer adoption modeling with combined heat and power applications

    E-Print Network [OSTI]

    Siddiqui, Afzal S.; Firestone, Ryan M.; Ghosh, Srijay; Stadler, Michael; Edwards, Jennifer L.; Marnay, Chris

    2003-01-01

    of Microgrid Distributed Energy Resource Potential Usingon Integration of Distributed Energy Resources: The CERTSof Customer Adoption of Distributed Energy Resources. ”

  19. Synthesis Techniques for Semi-Custom Dynamically Reconfigurable Superscalar Processors

    E-Print Network [OSTI]

    Ortiz, Jorge

    2009-12-22

    a startling impact on perfor- mance, however, so can the nature of the program running on the provided processor con guration. Performance maximization in a recon gurable system is analogous to customization. Thus, depending on the program?s... of this paradigm included the CDC 6600 computer [25], which was the predecessor of pipelined Reduced Instruction Set Computers (RISC), and IBM?s System 360/91 [26], which provided out-of-order in- struction execution through oating point units executing...

  20. Managing Business-to-Business Customer Relationships Following Key Contact Employee Turnover in a Vendor Firm

    E-Print Network [OSTI]

    Bendapudi, Neeli; Leone, Robert P.

    2002-04-01

    Customers form relationships with the employees who serve them as well as with the vendor firms these employees represent. In many cases, a customer’s relationship with an employee who is closest to them, a key contact employee, may be stronger than...

  1. The ultimate biomass refinery

    SciTech Connect (OSTI)

    Bungay, H.R. )

    1988-01-01

    Bits and pieces of refining schemes and both old and new technology have been integrated into a complete biomass harvesting, processing, waste recycle, and marketing complex. These choices are justified with economic estimates and technology assessments.

  2. Hydrogen Generation for Refineries

    Broader source: Energy.gov (indexed) [DOE]

    vacuum resid) * Dilbit (tar sand bitumen diluted with 30% condensate) * Biomass fast pyrolysis oil (whole raw oil) * Norpar 12 (C 11 C 12 paraffinic solvent - used as naphtha...

  3. Multiperiod Refinery Planning Optimization

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    ;7 Example 1: 5 crudes, 4 weeks Produce fuel gas, regular gasoline, premium gasoline, distillate, fuel oil gasoline, distillate, fuel oil and treated residu Optimal solution ($1000's) Profit 3641.3 Sales 33790 seconds (94% NLP, 6% MIP) #12;8 Example 2: 8 crudes, 6 weeks Produce fuel gas, regular gasoline, premium

  4. Refinery Outages: Fall 2014

    Gasoline and Diesel Fuel Update (EIA)

    gasoline supply in a particular region because pipeline infrastructure, geography and marine shipping regulations constrain the amount of product that can flow among the different...

  5. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)DecadeYear Jan FebCubicFracking,MichiganThousand47,959.15References and2009

  6. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)Decade Year-0 Year-1 Year-2Feet)Thousand Cubic Feet)698 1.8732009

  7. Refinery Capacity Report Historical

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)Decade Year-0 Year-1 Year-2Feet)Thousand Cubic Feet)698 1.8732009

  8. Refinery Outages: Fall 2014

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)Decade Year-0 Year-1 Year-2Feet)Thousand Cubic Feet)698 1.8732009Fall

  9. Hydrogen Generation for Refineries

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nA Guide to TappingWORKof EnergyResearch TriangleThroughclean fuelofPEER

  10. U.S. Refinery

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With WIPP UPDATE: AprilCubicProduction Capacity ofCrude Oil and

  11. U.S. Refinery

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming963 1.969 1.979Coal Consumers inYear Jan FebFeet)YearCrude Oil and

  12. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNaturalOctober 2015 Alcohol. TheData -

  13. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNaturalOctober 2015 Alcohol. TheData -1 Idle Operating

  14. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a. Space5,168

  15. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a. Space5,168Capacity Report

  16. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a. Space5,168Capacity Report5

  17. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a. Space5,168Capacity

  18. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a. Space5,168Capacity Operable

  19. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a. Space5,168Capacity

  20. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a. Space5,168Capacityof Last

  1. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a. Space5,168Capacityof

  2. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a. Space5,168CapacityofVacuum

  3. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a.

  4. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a.CORPORATION / Refiner /

  5. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a.CORPORATION / Refiner

  6. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a.CORPORATION /

  7. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a.CORPORATION / Cokers

  8. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a.CORPORATION / CokersMethod

  9. Molten Salt Test Loop (MSTL) system customer interface document.

    SciTech Connect (OSTI)

    Gill, David Dennis; Kolb, William J.; Briggs, Ronald D.

    2013-09-01

    The National Solar Thermal Test Facility at Sandia National Laboratories has a unique test capability called the Molten Salt Test Loop (MSTL) system. MSTL is a test capability that allows customers and researchers to test components in flowing, molten nitrate salt. The components tested can range from materials samples, to individual components such as flex hoses, ball joints, and valves, up to full solar collecting systems such as central receiver panels, parabolic troughs, or linear Fresnel systems. MSTL provides realistic conditions similar to a portion of a concentrating solar power facility. The facility currently uses 60/40 nitrate %E2%80%9Csolar salt%E2%80%9D and can circulate the salt at pressure up to 40 bar (600psi), temperature to 585%C2%B0C, and flow rate of 44-50kg/s(400-600GPM) depending on temperature. The purpose of this document is to provide a basis for customers to evaluate the applicability to their testing needs, and to provide an outline of expectations for conducting testing on MSTL. The document can serve as the basis for testing agreements including Work for Others (WFO) and Cooperative Research and Development Agreements (CRADA). While this document provides the basis for these agreements and describes some of the requirements for testing using MSTL and on the site at Sandia, the document is not sufficient by itself as a test agreement. The document, however, does provide customers with a uniform set of information to begin the test planning process.

  10. Utility-Customer Rate Negotiations Blackmail or Compromise? 

    E-Print Network [OSTI]

    Gilbert, J. S.

    1988-01-01

    to negotiate the price and service level of your energy sources. Utilities are busy designing creative methods to retain, shape and expand their 6usiness. Their customers are looking for the most economic, reliable and trustworthy supplier. This freedom... for negotiation. It is probably obvious that you can use coseneration as a technology to play fuel suppliers against each other, then to turn that around to negotiate a reduced price for your electrical service (if you really do not want to he in the power...

  11. Customized Nanoengineered Coatings for Science and Industry | Argonne

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding inCustomer-Comments Sign In About |National Laboratory

  12. "2014 Non-Utility Power Producers- Customers"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page|Monthly","10/2015","1/15/1981" ,"DataWorking17.2 116.9 107.6 104.9612.94.Customers"

  13. PowerChoice Residential Customer Response to TOU Rates

    SciTech Connect (OSTI)

    Peters, Jane S.; Moezzi, Mithra; Lutzenhiser, Susan; Woods, James; Dethman, Linda; Kunkle, Rick

    2009-10-01

    Research Into Action, Inc. and the Sacramento Municipal Utility District (SMUD) worked together to conduct research on the behaviors and energy use patterns of SMUD residential customers who voluntarily signed on to a Time-of-Use rate pilot launched under the PowerChoice label. The project was designed to consider the how and why of residential customers ability and willingness to engage in demand reduction behaviors, and to link social and behavioral factors to observed changes in demand. The research drew on a combination of load interval data and three successive surveys of participating households. Two experimental treatments were applied to test the effects of increased information on households ability to respond to the Time-of-Use rates. Survey results indicated that participants understood the purpose of the Time-of-Use rate and undertook substantial appropriate actions to shift load and conserve. Statistical tests revealed minor initial price effects and more marked, but still modest, adjustments to seasonal rate changes. Tests of the two information interventions indicated that neither made much difference to consumption patterns. Despite the lackluster statistical evidence for load shifting, the analysis points to key issues for critical analysis and development of residential Time-of-Use rates, especially pertinent as California sets the stage for demand response in more California residences.

  14. VISMASHUP: streamlining the creation of custom visualization applications

    SciTech Connect (OSTI)

    Ahrens, James P; Santos, Emanuele; Lins, Lauro; Freire, Juliana; Silva, Cl'audio T

    2010-01-01

    Visualization is essential for understanding the increasing volumes of digital data. However, the process required to create insightful visualizations is involved and time consuming. Although several visualization tools are available, including tools with sophisticated visual interfaces, they are out of reach for users who have little or no knowledge of visualization techniques and/or who do not have programming expertise. In this paper, we propose VISMASHUP, a new framework for streamlining the creation of customized visualization applications. Because these applications can be customized for very specific tasks, they can hide much of the complexity in a visualization specification and make it easier for users to explore visualizations by manipulating a small set of parameters. We describe the framework and how it supports the various tasks a designer needs to carry out to develop an application, from mining and exploring a set of visualization specifications (pipelines), to the creation of simplified views of the pipelines, and the automatic generation of the application and its interface. We also describe the implementation of the system and demonstrate its use in two real application scenarios.

  15. Customer Incentives for Energy Efficiency Through Electric and Natural Gas Rate Design

    SciTech Connect (OSTI)

    none,

    2009-09-01

    Summarizes the issues and approaches involved in motivating customers to reduce the total energy they consume through energy prices and rate design.

  16. SDG&E Customers Can Connect Home Area Network Devices With Smart...

    Open Energy Info (EERE)

    among customers who report they are turning off more lights, increasing air conditioning temperature, watching less TV and unplugging devices. Additional home area...

  17. The Program Administrator Cost of Saved Energy for Utility Customer-Funded Energy Efficiency Programs

    E-Print Network [OSTI]

    Billingsley, Megan A.

    2014-01-01

    of Electricity Energy Efficiency Programs. ” The Energyof Utility Customer-Funded Energy Efficiency Programs in the5803E. Consortium for Energy Efficiency (CEE). 2013. 2012

  18. Residential Customer Response to Real-time Pricing: The Anaheim Critical Peak Pricing Experiment

    E-Print Network [OSTI]

    Wolak, Frank A.

    2007-01-01

    load in California. Residential demand is approximately 30%12% reduction in statewide residential demand on a statewidefor residential customers with an aggregate peak demand that

  19. Customer Response to RTP in Competitive Markets: A Study of Niagara Mohawk's Standard Offer Tariff

    E-Print Network [OSTI]

    Boisvert, Richard N.; Cappers, Peter; Goldman, Charles; Neenan, Bernie; Hopper, Nicole

    2006-01-01

    for large end users in retail markets with customer choicecompetitive and regulated retail markets. To address thesenewly established retail market. Option Two was comprised of

  20. Characterizing Customer Preferences:  How the Doritos® Nachos Method Works for Electricity Service Plans

    E-Print Network [OSTI]

    Petrill, Ellen M; Neenan, Bernard; Robinson, Jennifer; Donnelly, Ellen

    2015-01-01

    Water Division. Nashville Electricity Service. Salt River® Nachos Method Works for Electricity Service Plans EllenABSTRACT Residential electricity customers typically pay the

  1. Customer Engagement in AEP gridSMART Residential Transactive System

    SciTech Connect (OSTI)

    Widergren, Steven E.; Marinovici, Maria C.; Fuller, Jason C.; Subbarao, Krishnappa; Chassin, David P.; Somani, Abhishek

    2014-12-31

    — In 2013, AEP Ohio (AEP) operated a 5-minute real-time price (RTP) electricity market system on 4 distribution feeders as part of their gridSMART® demonstration project. The RTP households were billed for their electricity usage according to an RTP tariff approved by the Public Utility Commission of Ohio. They were given the incentive that their annual bill would be no greater than if they were on the flat-rate tariff, but they had financial incentives to shift consumption from high price periods to low price periods. Incentives were also available for response under high prices from local events, such as reaching the distribution feeder capacity or a critical peak pricing event. An analysis of this transactive system experiment was completed in early 2014. This paper describes the incentive provided to the customer, the nature of their interaction with the smart thermostat that provided automated response to the transactive signal, and their level of satisfaction with the program.

  2. Energy Efficiency and Renewable Energy Network (EREN): Customer satisfaction survey

    SciTech Connect (OSTI)

    Anderson, A.V. [Information International Associates, Inc., Oak Ridge, TN (United States); Henderson, D.P. [Dept. of Energy, Oak Ridge, TN (United States). Office of Scientific and Technical Information

    1996-04-22

    The Energy Efficiency and Renewable Energy Network (EREN) Customer Satisfaction Survey was developed and executed in support of EREN`s continuous quality improvement (CQI) plan. The study was designed to provide information about the demographic make up of EREN users, the value or benefits they derive from EREN, the kinds and quality of services they want, their levels of satisfaction with existing services, their preferences in both the sources of service and the means of delivery, and to provide benchmark data for the establishment of continuous quality improvement measures. The survey was performed by soliciting voluntary participation from members of the EREN Users Group. It was executed in two phases; the first being conducted by phone using a randomly selected group; and the second being conducted electronically and which was open to all of the remaining members of the Users Group. The survey results are described.

  3. Rate Structures for Customers With Onsite Generation: Practice and Innovation

    SciTech Connect (OSTI)

    Johnston, L.; Takahashi, K.; Weston, F.; Murray, C.

    2005-12-01

    Recognizing that innovation and good public policy do not always proclaim themselves, Synapse Energy Economics and the Regulatory Assistance Project, under a contract with the California Energy Commission (CEC) and the National Renewable Energy Laboratory (NREL), undertook a survey of state policies on rates for partial-requirements customers with onsite distributed generation. The survey investigated a dozen or so states. These varied in geography and the structures of their electric industries. By reviewing regulatory proceedings, tariffs, publications, and interviews, the researchers identified a number of approaches to standby and associated rates--many promising but some that are perhaps not--that deserve policymakers' attention if they are to promote the deployment of cost-effective DG in their states.

  4. AN -NASH EQUILIBRIUM WITH HIGH PROBABILITY FOR STRATEGIC CUSTOMERS IN HEAVY TRAFFIC

    E-Print Network [OSTI]

    Atar, Rami

    AN -NASH EQUILIBRIUM WITH HIGH PROBABILITY FOR STRATEGIC CUSTOMERS IN HEAVY TRAFFIC RAMI ATAR of an -Nash equilibrium with probability approaching 1. On way to proving this result, new diffusion limit customers; -Nash equilibrium with high probability 1. INTRODUCTION Equilibrium behavior of strategic

  5. A Vision System for Automated Customer Tracking for Marketing Analysis: Low Level Feature Extraction

    E-Print Network [OSTI]

    Tuceryan, Mihran

    Extraction Alex Leykin and Mihran Tuceryan Computer Science Department Indiana University Bloomington, USA the position of the customers in the store. We present a method to extract the low-level head coordinates on automated analyses of their customers' behaviors for making optimal marketing decisions. One recent trend

  6. Automated Customer-Centric Performance Analysis of Generalised Stochastic Petri Nets

    E-Print Network [OSTI]

    Imperial College, London

    Automated Customer-Centric Performance Analysis of Generalised Stochastic Petri Nets Using Tagged in Generalised Stochastic Petri Net (GSPN) models are indistinguishable, it is not always possible to reason of the "tagged customer" technique used in the analysis of queueing networks. Under this scheme, one token

  7. Linear Friction Welding Process Model for Carpenter Custom 465 Precipitation-Hardened Martensitic

    E-Print Network [OSTI]

    Grujicic, Mica

    for Carpenter Custom 465 precipitation-hardened martensitic stainless steel to develop a linear friction weldingLinear Friction Welding Process Model for Carpenter Custom 465 Precipitation-Hardened Martensitic Stainless Steel M. Grujicic, R. Yavari, J.S. Snipes, S. Ramaswami, C.-F. Yen, and B.A. Cheeseman (Submitted

  8. "VEPP Part XIV: Custom Drills" ILLUSTRATED PRINCIPLES David Alciatore, PhD ("Dr. Dave")

    E-Print Network [OSTI]

    Alciatore, David G.

    "VEPP ­ Part XIV: Custom Drills" ILLUSTRATED PRINCIPLES David Alciatore, PhD ("Dr. Dave DVD, where you create and work on customized drills based on you specific areas of weakness is with a "progressive practice" drill, where the difficulty level starts out easy and gradually increases. For example

  9. Solar PV Deployment through Renewable Energy Tariff: An Option for Key Account Customers

    Office of Energy Efficiency and Renewable Energy (EERE)

    Renewable energy tariffs, a new program and rate option being offered by some utilities to large customers, are quickly attracting attention in the renewable energy world as a way to do this. These tariffs allow a high energy usage customer to pay a slight premium in order to obtain all or a portion of their electricity from renewable sources.

  10. Group Name: University of California, Davis Medical Center Benefit Plan Name: Custom Plus Plan #10

    E-Print Network [OSTI]

    Leistikow, Bruce N.

    Group Name: University of California, Davis Medical Center Benefit Plan Name: Custom Plus Plan #10. Page 1 of 2 #12;Group Name: University of California, Davis Medical Center Benefit Plan Name: Custom/PPO dentist cannot "balance bill" you for amounts greater than the contracted rate. How It Works Out

  11. Pricing Electricity for Default Customers: Pass Through or Performance-Based Rates?

    E-Print Network [OSTI]

    California at Berkeley. University of

    becomes profitable, UDCs might use their distribution assets to stifle competition in the retail marketPWP-066 Pricing Electricity for Default Customers: Pass Through or Performance-Based Rates? Carl;1 Pricing Electricity for Default Customers: Pass Through or Performance-Based Rates? Carl Blumstein1 August

  12. The Peril of Fragmentation: Security Hazards in Android Device Driver Customizations

    E-Print Network [OSTI]

    The Peril of Fragmentation: Security Hazards in Android Device Driver Customizations Xiaoyong Zhou of Illinois at Urbana-Champaign Email: naveed2@illinois.edu Abstract--Android phone manufacturers are under the per- petual pressure to move quickly on their new models, continu- ously customizing Android to fit

  13. June 2003 NREL/TP-620-33177 Listening to Customers

    E-Print Network [OSTI]

    June 2003 · NREL/TP-620-33177 Listening to Customers: How Deliberative Polling Helped Build 1 National Renewable Energy Laboratory 1617 Cole Boulevard Golden, Colorado 80401-3393 NREL is a U-AC36-99-GO10337 #12;June 2003 · NREL/TP-620-33177 Listening to Customers: How Deliberative Polling

  14. Value-based Customer Grouping from Large Retail Data-sets Alexander Strehl and Joydeep Ghosh

    E-Print Network [OSTI]

    Strehl, Alexander

    on a real retail industry data-set of several thousand customers and products, to demonstrate the power of the proposed technique. Keywords: Data mining, clustering, graph partitioning, retail marketing 1. INTRODUCTIONValue-based Customer Grouping from Large Retail Data-sets Alexander Strehl and Joydeep Ghosh

  15. Customization and 3D Printing: A Challenging Playground for Software Product Lines

    E-Print Network [OSTI]

    Boyer, Edmond

    Customization and 3D Printing: A Challenging Playground for Software Product Lines Mathieu Acher firstname.lastname@irisa.fr ABSTRACT 3D printing is gaining more and more momentum to build customized. We provide hints that SPL-alike techniques are practically used in 3D printing and thus relevant

  16. Abstract --Most logistics network design models assume exogenous customer demand that is independent of the service

    E-Print Network [OSTI]

    Graves, Stephen C.

    Abstract -- Most logistics network design models assume exogenous customer demand for the network design decision making process. Index Terms -- Logistics Network Design, Demand Classes, Benefits. In most logistics network design models, the customer demand is exogenous and defined as a uniform

  17. The Impact of Rate Design and Net Metering on the Bill Savings from Distributed PV for Residential Customers in California

    E-Print Network [OSTI]

    Darghouth, Naim R.

    2012-01-01

    greater support for PV adoption among high usage customers.customer adoption of distributed photovoltaics (PV), but hasadoption. In the long-run, however, large differences in the compensation provided for distributed PV

  18. Interactions between Energy Efficiency Programs funded under the Recovery Act and Utility Customer-Funded Energy Efficiency Programs

    E-Print Network [OSTI]

    Goldman, Charles A.

    2011-01-01

    integration, transmission planning, utility rate design, andconsidered in utility customer planning so that new programsand utility customer-funded energy efficiency program administrators in regard to program planning and

  19. Estimated Value of Service Reliability for Electric Utility Customers in the United States

    SciTech Connect (OSTI)

    Sullivan, M.J.; Mercurio, Matthew; Schellenberg, Josh

    2009-06-01

    Information on the value of reliable electricity service can be used to assess the economic efficiency of investments in generation, transmission and distribution systems, to strategically target investments to customer segments that receive the most benefit from system improvements, and to numerically quantify the risk associated with different operating, planning and investment strategies. This paper summarizes research designed to provide estimates of the value of service reliability for electricity customers in the US. These estimates were obtained by analyzing the results from 28 customer value of service reliability studies conducted by 10 major US electric utilities over the 16 year period from 1989 to 2005. Because these studies used nearly identical interruption cost estimation or willingness-to-pay/accept methods it was possible to integrate their results into a single meta-database describing the value of electric service reliability observed in all of them. Once the datasets from the various studies were combined, a two-part regression model was used to estimate customer damage functions that can be generally applied to calculate customer interruption costs per event by season, time of day, day of week, and geographical regions within the US for industrial, commercial, and residential customers. Estimated interruption costs for different types of customers and of different duration are provided. Finally, additional research and development designed to expand the usefulness of this powerful database and analysis are suggested.

  20. Interactions Between Energy Efficiecy Programs Funded Under Recover Act and Utility Customer-funded Energy Efficiency Programs

    Broader source: Energy.gov [DOE]

    Interactions Between Energy Efficiecy Programs Funded Under Recover Act and Utility Customer-funded Energy Efficiency Programs Webinar.

  1. The Program Administrator Cost of Saved Energy for Utility Customer-Funded Energy Efficiency Programs

    E-Print Network [OSTI]

    Billingsley, Megan A.

    2014-01-01

    Effectiveness of Electricity Energy Efficiency Programs. ”The Energy Journal 33 (2). Barbose, G. L. , C.A. Goldman, I.of Utility Customer-Funded Energy Efficiency Programs in the

  2. Researchers find 3-D printed parts to provide low-cost, custom...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Researchers find 3-D printed parts to provide low-cost, custom alternatives for laboratory equipment By Raphael Rosen February 26, 2015 Tweet Widget Google Plus One Share on...

  3. Order promising/fulfillment and customer/channel collaboration in supply chain management

    E-Print Network [OSTI]

    An, Yimin, M. Eng. Massachusetts Institute of Technology

    2006-01-01

    This research investigates the order promising and fulfillment and customer and channel collaboration functions of a company. In addition to presenting more precise definitions, we identify and analyze current and emerging ...

  4. DOE Tour of Zero: The Illinois First Zero Energy Custom by Evolutionar...

    Broader source: Energy.gov (indexed) [DOE]

    This 3,600-square-foot custom home built by Evolutionary Home Builders LLC (formerly Weiss Building and Development) is the first certified U.S. DOE Zero Energy Ready Home in...

  5. Mining customer credit by using neural network model with logistic regression approach 

    E-Print Network [OSTI]

    Kao, Ling-Jing

    2001-01-01

    . The objective of this research was to investigate the methodologies to mine customer credit history for the bank industry. Particularly, combination of logistic regression model and neural network technique are proposed to determine if the predictive capability...

  6. Keep Customers-and Energy-From Slipping Through the Cracks |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Keep Customers-and Energy-From Slipping Through the Cracks A photo of three people standing and talking to each other, two men and a woman, inside a home. The most successful...

  7. Lean manufacturing in a mass customization plant : improved efficiencies in raw material presentation

    E-Print Network [OSTI]

    Daneshmand, Moojan

    2011-01-01

    This thesis focuses on the application of the principles of lean manufacturing at Varian Semiconductor Equipment Associates (VSEA). The company faces the challenges of highly customized assembly as well as fluctuating ...

  8. Residential Customer Response to Real-time Pricing: The Anaheim Critical Peak Pricing Experiment

    E-Print Network [OSTI]

    Wolak, Frank A.

    2007-01-01

    The consumption reductions paid rebates during CPP days area CPP rate with a rebate mechanism as the default rate forthese customers received a rebate of 35 cents/KWh for the

  9. Efficient design-space exploration of custom instruction-set extensions 

    E-Print Network [OSTI]

    Zuluaga, Marcela

    2010-01-01

    Customization of processors with instruction set extensions (ISEs) is a technique that improves performance through parallelization with a reasonable area overhead, in exchange for additional design effort. This thesis ...

  10. Impact of information and communications technologies on residental customer energy services

    SciTech Connect (OSTI)

    Goldman, C.; Kempton, W.; Eide, A.; Iyer, M. [and others

    1996-10-01

    This study analyzes the potential impact of information and communications technologies on utility delivery of residential customer energy services. Many utilities are conducting trials which test energy-related and non-energy services using advanced communications systems.

  11. Advertising in a Competitive Market: The Role of Product Standards, Customer Learning, and Switching Costs

    E-Print Network [OSTI]

    Anderson, Eric T.

    Standard models of competition predict that firms will sell less when competitors target their customers with advertising. This is particularly true in mature markets with many competitors that sell relatively undifferentiated ...

  12. List of DOE radioisotope customers with summary of radioisotope shipments, FY 1980

    SciTech Connect (OSTI)

    Burlison, J.S. (comp.)

    1981-08-01

    The sixteenth edition of the radioisotope customer list was prepared at the request of the Office of Health and Environmental Research, Office of energy Research, Department of Energy (DOE). This document lists DOE's radioisotope production and distribution activities by its facilities at Argonne National Laboratory; Pacific Northwest Laboratory; Brookhaven National Laboraory; Hanford Engineering Development Laboratory; Idaho Operations Office; Los Alamos Scientific Laboratory; Mound Facility; Oak Ridge National Laboratory; Savannah River Laboratory; and UNC Nuclear Industries, Inc. The information is divided into five sections: (1) isotope suppliers, facility, contracts and isotopes or services supplied; (2) alphabetical list of customers, and isotopes purchased; (3) alphabetical list of isotopes cross-referenced to customer numbers; (4) geographical location of radioisotope customers; and (5) radioisotope sales and transfers-FY 1980.

  13. Estimating Demand Response Market Potential Among Large Commercial and Industrial Customers: A Scoping Study

    E-Print Network [OSTI]

    Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan, Bernie; Cappers, Peter

    2007-01-01

    3–6 percent of non-residential peak demand, can be viewed as3–6 percent of non-residential peak demand, can be viewed asto large, non-residential customers with peak demand greater

  14. Establishing an inventory management process to meet high customer service levels in a vaccines organization

    E-Print Network [OSTI]

    Wonsowicz, Johanna Christine

    2010-01-01

    Inventory management is a complex aspect of Supply Chain Management that is frequently discussed and debated due to the fact that it has a high impact on customer satisfaction as well as financial performance. This thesis ...

  15. CHP Modeling as a Tool for Electric Power Utilities to Understand Major Industrial Customers 

    E-Print Network [OSTI]

    Kumana, J. D.; Alanis, F. J.; Swad, T.; Shah, J. V.

    1997-01-01

    in understanding the available options and appropriate strategy is to properly understand the customers’ thermal and electric energy needs, and the existing Combined Heat and Power (CHP) system. This paper outlines an approach for developing such models at low cost...

  16. Customized digital manufacturing : concept to construction methods across varying product scales

    E-Print Network [OSTI]

    Botha, Marcel

    2006-01-01

    Architectural design and construction is rapidly changing through the extensive adoption of digital design, manufacture and assembly tools. Customized assemblies are paired and recombined to create unique spatial enclosures. ...

  17. Service bulletin inventory management and modeling for aerospace parts in customer service organization

    E-Print Network [OSTI]

    Pardede, Erna K. (Erna Kertasasmita)

    2013-01-01

    The Customer Service department of United Technology Corporation (UTC) Aerospace System is primarily responsible for providing spare parts, repair services, training, and technical support for products that UTC Aerospace ...

  18. Lean Aircraft Initiative Implementation Workshop #3: Customer and Supplier Integration Across the Supply Chain

    E-Print Network [OSTI]

    Cutcher-Gershenfeld, Joel

    The integration of customers and suppliers along the supply chain involves a fundamental transformation of the way business is conducted in the Aerospace industry. Lean Aerospace Initiative (LAI) members, as well as ...

  19. Methods for polynuclear aromatic hydrocarbon determination in air samples using polar-bonded phase HPLC and GC-MS with application to oil refinery samples

    SciTech Connect (OSTI)

    Karlesky, K.L.

    1985-01-01

    Particle samples were collected using high volume air samplers fitted with glass fiber filters or with a cascade impactor containing paper filters. They were then cleaned using either extraction with dimethylsulfoxide and pentane or utilizing a small cartridge containing a diamine polar-bonded phase material, the second method being more effective. Vapor phase PAH were sampled using an apparatus designed in the laboratory. After collection, the resins were desorbed with solvent and the PAH content was determined. The suitability of the resins decrease in the following order: Amberlite XAD-2, Chromosorb 105, Tenax GC, coconut charcoal, and Ambesorb XE-348. High performance liquid chromatography (HPLC) was used to determine the behavior of PAH in the normal and reversed phase on polar-bonded phases containing amine, diamine, and pyrrolidone substrates. Results support the proposed mechanism in the normal phase and indicate that both a partitioning and liquid-solid adsorption mechanism takes place in the reversed phase depending upon the mobile phase. Occasionally, these polar-bonded phases can be deactivated by the formation of amine-carbonyl complexes from polar aldehydes or ketones in the solvent or sample. Deactivation can be reversed by flushing with water to hydrolyze the Schiff's base imine back to the amine. Gas chromatography-mass spectroscopy (GC-MS) was used to analyze air samples from oil refineries in Port Arthur, collected over a period of three years. The analytical procedures are applied to the collected samples to determine if they contain detectable amounts of PAH. The GC-MS analysis was adequate for this study but the use of SIM detection is preferred because of the greater sensitivity for PAH.

  20. The Public Utility and Industry: A Customer- Supplier Relationship for Long-Term Survival 

    E-Print Network [OSTI]

    Janson, J. R.

    1990-01-01

    AND INDUSTRY: A CUSTOMER-SUPPLIER RELATIONSHIP FOR LONG-TERM SURVIVAL JAMES R. JANSON Superintendent of Utilities Vulcan Chemicals Geismar, Louisiana ABSTRACT other was due to better quality products than we as a nation could produce. The entire... people feel they are involved in the total process. How does all of this relate to the utility and industrial sector of the business community? As mentioned previously, the five points to improve an organization can bring about a customer-supplier...

  1. Electric & Gas Conservation Programs Connecticut Energy Efficiency Fund Programs for Commercial & Industrial Customers 

    E-Print Network [OSTI]

    Sermakekian, E.

    2011-01-01

    Conservation Programs Connecticut Energy Efficiency Fund Programs for Commercial & Industrial Customers Presented by: CL&P?s Conservation and Load Management Department 2 ? Connecticut Energy Efficiency Fund (CEEF) was created... in 1998 by CT State Legislature ? Energy efficiency is a valuable resource for Connecticut, it: ? Reduces air pollutants and greenhouse gases ? Creates monetary savings for customers ? Reduces need for more energy generation ? Creates jobs ? Money...

  2. The Economic Value of PV and Net Metering to Residential Customers in California

    SciTech Connect (OSTI)

    Darghouth, Naim; Barbose, Galen; Wiser, Ryan

    2010-05-17

    In this paper, we analyze the bill savings from PV for residential customers of the California's two largest electric utilities, under existing net metering tariffs as well as under several alternative compensation mechanisms. We find that economic value of PV to the customer is dependent on the structure of the underlying retail electricity rate and can vary quite significantly from one customer to another. In addition, we find that the value of the bill savings from PV generally declines with PV penetration level, as increased PV generation tends to offset lower-priced usage. Customers in our sample from both utilities are significantly better off with net metering than with a feed-in tariff where all PV generation is compensated at long-run avoided generation supply costs. Other compensation schemeswhich allow customers to displace their consumption with PV generation within each hour or each month, and are also based on the avoided costs, yield similar value to the customer as net metering.

  3. Impact of Rate Design Alternatives on Residential Solar Customer Bills. Increased Fixed Charges, Minimum Bills and Demand-based Rates

    SciTech Connect (OSTI)

    Bird, Lori; Davidson, Carolyn; McLaren, Joyce; Miller, John

    2015-09-01

    With rapid growth in energy efficiency and distributed generation, electric utilities are anticipating stagnant or decreasing electricity sales, particularly in the residential sector. Utilities are increasingly considering alternative rates structures that are designed to recover fixed costs from residential solar photovoltaic (PV) customers with low net electricity consumption. Proposed structures have included fixed charge increases, minimum bills, and increasingly, demand rates - for net metered customers and all customers. This study examines the electricity bill implications of various residential rate alternatives for multiple locations within the United States. For the locations analyzed, the results suggest that residential PV customers offset, on average, between 60% and 99% of their annual load. However, roughly 65% of a typical customer's electricity demand is non-coincidental with PV generation, so the typical PV customer is generally highly reliant on the grid for pooling services.

  4. The Privacy Coach: Supporting customer privacy in the Internet of Things

    E-Print Network [OSTI]

    Broenink, Gerben; Hof, Christian van 't; van Kranenburg, Rob; Smits, David; Wisman, Tijmen

    2010-01-01

    The Privacy Coach is an application running on a mobile phone that supports customers in making privacy decisions when confronted with RFID tags. The approach we take to increase customer privacy is a radical departure from the mainstream research efforts that focus on implementing privacy enhancing technologies on the RFID tags themselves. Instead the Privacy Coach functions as a mediator between customer privacy preferences and corporate privacy policies, trying to find a match between the two, and informing the user of the outcome. In this paper we report on the architecture of the Privacy Coach, and show how it enables users to make informed privacy decisions in a user-friendly manner. We also spend considerable time to discuss lessons learnt and to describe future plans to further improve on the Privacy Coach concept.

  5. Customer service model for waste tracking at Los Alamos National Laboratory

    SciTech Connect (OSTI)

    Dorries, Alison M [Los Alamos National Laboratory; Montoya, Andrew J [Los Alamos National Laboratory; Ashbaugh, Andrew E [Los Alamos National Laboratory

    2010-11-10

    The deployment of any new software system in a production facility will always face multiple hurtles in reaching a successful acceptance. However, a new waste tracking system was required at the plutonium processing facility at Los Alamos National Laboratory (LANL) where waste processing must be integrated to handle Special Nuclear Materials tracking requirements. Waste tracking systems can enhance the processing of waste in production facilities when the system is developed with a focus on customer service throughout the project life cycle. In March 2010 Los Alamos National Laboratory Waste Technical Services (WTS) replaced the aging systems and infrastructure that were being used to support the plutonium processing facility. The Waste Technical Services (WTS) Waste Compliance and Tracking System (WCATS) Project Team, using the following customer service model, succeeded in its goal to meet all operational and regulatory requirements, making waste processing in the facility more efficient while partnering with the customer.

  6. Enhancing User Customization through Novel Software Architecture for Utility Scale Solar Siting Software

    SciTech Connect (OSTI)

    Brant Peery; Sam Alessi; Randy Lee; Leng Vang; Scott Brown; David Solan; Dan Ames

    2014-06-01

    There is a need for a spatial decision support application that allows users to create customized metrics for comparing proposed locations of a new solar installation. This document discusses how PVMapper was designed to overcome the customization problem through the development of loosely coupled spatial and decision components in a JavaScript plugin architecture. This allows the user to easily add functionality and data to the system. The paper also explains how PVMapper provides the user with a dynamic and customizable decision tool that enables them to visually modify the formulas that are used in the decision algorithms that convert data to comparable metrics. The technologies that make up the presentation and calculation software stack are outlined. This document also explains the architecture that allows the tool to grow through custom plugins created by the software users. Some discussion is given on the difficulties encountered while designing the system.

  7. Customer System Efficiency Improvement Assessment: Description and examination of system characterization data

    SciTech Connect (OSTI)

    Callaway, J.W.; DeSteese, J.G.

    1986-12-01

    This report describes three data bases that were developed in the Customer System Efficiency Improvement (CSEI) Assessment project to help characterize transmission and distribution (T and D) system losses experienced by utility customers in the Pacific Northwest. A principal objective of this project is to assess the potential for electric energy conservation in the T and D systems of BPA's utility customers. The three data bases provide essential input on the number and operating characteristics of T and D component stocks that was used in another task of the CSEI Project to estimate the conservation supply functions that result from replacing existing stocks with more efficient components (Tepel et al. 1986). This document describes the three data bases, provides a guide to their use, and presents a summary characterization of the principal loss-generating components (lines and transformers) of the region's T and D systems.

  8. Outlook for Refinery Outages and Available Refinery Capacity...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of gasoline and distillate, and to include a more detailed consideration of the impact of unexpected outages on product supplies. This report reviews the potential...

  9. Interactions between Energy Efficiency Programs funded under the Recovery Act and Utility Customer-Funded Energy Efficiency Programs

    E-Print Network [OSTI]

    Goldman, Charles A.

    2011-01-01

    electric and gas utility customers in the 12 case study states and estimates energy efficiency program budgets as a percent of retail sales

  10. Interactions Between Energy Efficiecy Programs Funded Under Recover Act and Utility Customer-funded Energy Efficiency Programs

    Office of Energy Efficiency and Renewable Energy (EERE)

    This webinar covered utility customer-funded and Recovery Act-funded energy efficiency programs, results of analysis in 12 case study states, and case study examples.

  11. Interactions between Energy Efficiency Programs Funded Under the Recovery Act and Utility Customer-Funded Energy Efficiency Programs

    E-Print Network [OSTI]

    Goldman, Charles A.

    2014-01-01

    of Energy Office of Energy Efficiency and Renewable Energy,Interactions between Energy Efficiency Programs Funded UnderUtility Customer-Funded Energy Efficiency Programs Charles

  12. The Impact of Rate Design and Net Metering on the Bill Savings from Distributed PV for Residential Customers in California

    E-Print Network [OSTI]

    Darghouth, Naim

    2010-01-01

    Inc. 2009. Distributed Renewable Energy Operating ImpactsDistributed PV for Residential Customers in California Prepared for the Office of Energy Efficiency and Renewable Energy

  13. Residential Customer Enrollment in Time-based Rate and Enabling Technology Programs: Smart Grid Investment Grant Consumer Behavior Study Analysis

    E-Print Network [OSTI]

    Todd, Annika

    2014-01-01

    2011 Assessment of Demand Response & Advanced Metering:Critical Peak Rebate – A demand response program that paysthe benefits from customer demand response enabled by these

  14. | | |SUBSCRIBE Renew Customer Service Premium Content HOME MAGAZINE ARCHIVE COLUMNS JOBS & CAREERS REPORTS MIT INSIDER FREE NEWSLETTER

    E-Print Network [OSTI]

    Reif, John H.

    | | |SUBSCRIBE Renew Customer Service Premium Content HOME MAGAZINE ARCHIVE COLUMNS JOBS & CAREERS REPORTS MIT INSIDER FREE NEWSLETTER TOPICS Biotech Business Computing Energy Nanotech Security Software

  15. Cost of Service and Rate Design Issues Affecting Industrial Customers in Retail Rate Proceedings 

    E-Print Network [OSTI]

    Stover, C. N. Jr.

    1986-01-01

    stream_source_info ESL-IE-86-06-21.pdf.txt stream_content_type text/plain stream_size 27248 Content-Encoding ISO-8859-1 stream_name ESL-IE-86-06-21.pdf.txt Content-Type text/plain; charset=ISO-8859-1 COST OF SERVICE.... They include: (1) the determination of revenue requirements for the utility, (2) the allocation of revenue requirements to individual customer classes, and (3) the allocation of revenue requirements to individual customers within a class. If energy costs...

  16. Integrated Forest Products Refinery (IFPR)

    SciTech Connect (OSTI)

    van Heiningen, Adriaan R. P.

    2010-05-29

    Pre-extraction–kraft studies of hardwoods showed that when extracting about 10% of the wood, the final kraft pulp yield and physical properties could only be maintained at a level similar to that of regular kraft pulp when the final extract pH was close to neutral. This so-called “near neutral” pre-extraction condition at a level of 10% wood dissolution was achieved by contacting the wood chips with green liquor (GL) at a charge of about 3% (as Na2O on wood) at 160 °C for almost 2 hours (or an H-factor of about 800 hrs.). During subsequent kraft cooking of the pre-extracted hardwood chips the effective alkali charge could be reduced by about 3% (as Na2O on wood) and the cooking time shortened relative to that during regular kraft cooking, while still producing the same bleachable grade kappa number as the kraft control pulp. For softwood, no extraction conditions were discovered in the present investigation whereby both the final kraft pulp yield and physical properties could be maintained at a level similar to that of regular softwood kraft pulp. Therefore for hardwoods the “near- neutral green liquor pre-extraction conditions do meet the requirements of the IFPR concept, while for softwood, no extraction conditions were discovered which do meet these requirements. Application of simulated industrial GL at an extraction H-factor of about 800 hrs and 3% GL charge in a recirculating digester produced an hardwood extract containing about 4% (on wood) of total anhydro-sugars, 2% of acetic acid, and 1.3% of lignin. Xylan comprised of 80% of the sugars of which about 85% is oligomeric. Since only polymeric hemicelluloses and lignin may be adsorbed on pulp (produced at a yield of about 50% from the original wood), the maximum theoretical yield increase due to adsorption may be estimated as 10% on pulp (or 5% on wood). However, direct application of raw GL hardwood extract for hemicelluloses adsorption onto hardwood kraft pulp led to a yield increase of only about 1% (on pulp). By using the wet-end retention aid guar gum during the adsorption process at a charge of 0.5% on pulp the yield gain may be increased to about 5%. Unfortunately, most of this yield increase is lost during subsequent alkaline treatments in the pulp bleach plant. It was found that by performing the adsorption at alkaline conditions the adsorption loss during alkaline treatment in the bleach plant is mostly avoided. Thus a permanent adsorption yield of about 3 and 1.5% (on pulp) was obtained with addition of guar gum at a charge of 0.5 and 0.1% respectively during adsorption of GL hardwood extract on pre-extracted kraft pulp at optimal conditions of pH 11.5, 90 C for 60 minutes at 5% consistency. The beatability of the adsorbed kraft pulps was improved. Also, significant physical strength improvements were achieved. Further study is needed to determine whether the improvements in pulp yield and paper properties make this an economic IFPR concept. Application of the wood solids of a hot water extract of Acer rubrum wood strands as a substitute for polystyrene used for production of SMC maintained the water adsorption properties of the final product. Further work on the physical properties of the hemicellulose containing SMCs need to be completed to determine the potential of wood extracts for the production of partially renewable SMCs. The discovery of the “near-neutral” green liquor extraction process for hardwood was formed the basis for a commercial Integrated Biorefinery that will extract hemicelluloses from wood chips to make biofuels and other specialty chemicals. The pulp production process will be maintained as is proposed in the present researched IFBR concept. This Integrated Biorefinery will be constructed by Red Shield Acquisition LLC (RSA) at the Old Town kraft pulp mill in Maine. RSA in collaboration with the University of Maine will develop and commercialize the hemicellulose extraction process, the conversion of the hemicellulose sugars into butanol by fermentation, and the separation of specialty chemicals such as acetic acid fr

  17. A Louisiana Refinery Success Story 

    E-Print Network [OSTI]

    Kacsur, D.

    2009-01-01

    "Refining 155,000 barrels of crude oil daily, a Louisiana plant markets oil products to gas stations in at least 26 states, including Washington, D.C. The plant uses 8,538 steam traps with 1,200-, 600-, 250-, 75-, 40- and 15-psi nominal pressures...

  18. PSM implementation at a refinery

    SciTech Connect (OSTI)

    Nahale, T.

    1995-12-31

    Prior to the promulgation of the OSHA Standard on Process Safety Management (PSM), the petroleum industry had a precursor developed by the American Petroleum Institute titled Recommended Practice 750, Management of Process Hazards. This Recommended Practice, though not identical with the OSHA regulation, provided the industry with a voluntary standard prior to May, 1992, when PSM went into effect. In formulating a PSM implementation strategy, one of the first decisions encountered at a facility is whether to utilize a separate group dedicated full-time to PSM issues, or to develop the program using key individuals who continue to perform their regulator job duties. Although a PSM manager may prefer one strategy over the other, this staffing decisions is normally made by senior management at the facility.

  19. A Texas Refinery Success Story 

    E-Print Network [OSTI]

    Kacsur, D.

    2009-01-01

    "Common knowledge rules that maintenance is the key to long-lasting machinery performance. Yet steam traps are often left to their own devices, to fail or succeed alone. And without steam trap programs, plants are certain to experience a high...

  20. Refinery Outages: First Half 2015

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)Decade Year-0 Year-1 Year-2Feet)Thousand Cubic Feet)698

  1. U.S. Refinery Yield

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With WIPP UPDATE: AprilCubicProduction Capacity ofCrudeStocks2009 2010

  2. Motiva Refinery | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergyInterested Parties -Department of Energy Moratorium andDepartment ofDepartment

  3. U.S. Refinery Stocks

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices Global CrudeWhat'sMay-15 Jun-15 Jul-15Area: U.S.

  4. U.S. Refinery Yield

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices Global CrudeWhat'sMay-15 Jun-15 Jul-15Area:

  5. Refinery Outages: First Half 2015

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a.CORPORATION /Analysis &

  6. Reformulated Gasoline Foreign Refinery Rules

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a.CORPORATIONReformulated

  7. Total Number of Operable Refineries

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home PageMonthly","10/2015"4,"Ames5 Tables July 1996 Energy Information Administration Office of Coal, Nuclear,DecadeYearbyWithdrawalsHome6,672(MillionFeet)Product:

  8. Combining Customer Attribute and Social Network Mining for Prepaid Mobile Churn Prediction

    E-Print Network [OSTI]

    Putten, Peter van der

    Combining Customer Attribute and Social Network Mining for Prepaid Mobile Churn Prediction Palupi D in the prepaid segment of the telecommunication industry. This paper investigates the extent to which social net to improve churn prediction accuracy in the prepaid seg- ment. Examples of such features include the number

  9. Gluten-Free Guidelines A BASIC GUIDE TO SERVING GLUTEN-FREE CUSTOMERS

    E-Print Network [OSTI]

    Hill, Wendell T.

    Gluten-Free Guidelines A BASIC GUIDE TO SERVING GLUTEN-FREE CUSTOMERS Celiac disease and gluten intolerance are SERIOUS medical conditions. A strict gluten-free diet is REQUIRED to maintain health. Gluten not constitute endorsement. The materials in the Gluten-Free Restaurant Awareness and Gluten-Free Food Service

  10. Modeling Customer Reactions to Sales Attempts: If Cross-Selling Backfires

    E-Print Network [OSTI]

    Örmeci, E. Lerzan

    Research Council of Turkey and thank the MEDS Department at the Kellogg School of Management, Northwestern state. The results highlight the role the cost of excessive cross-selling (direct as well as in the form and Zimmerman 1999) and reduce customer

  11. Beef customer satisfaction: factors affecting consumer evaluations of clod, top round, and top sirloin steaks 

    E-Print Network [OSTI]

    Goodson, Kyla Judene

    2000-01-01

    by either USDA grade or marinade. Flavor Like was the sensory trait most closely related to customer satisfaction of clod and top round steaks. Top sirloin steaks were evaluated by a different population of consumers in Chicago. One half of the consumers...

  12. Molecular self-assembly with scaffolded DNA origami enables building custom-shaped

    E-Print Network [OSTI]

    Cai, Long

    Molecular self-assembly with scaffolded DNA origami enables building custom-shaped nanometer-scale objects with molecular weights in the megadalton regime. Here we provide a practical guide for design and assembly of scaffolded DNA origami objects. We also introduce a computational tool for predicting

  13. Hybrid and Custom Data Structures: Evolution of the Data Structures Course

    E-Print Network [OSTI]

    Wagner, Paul J.

    Hybrid and Custom Data Structures: Evolution of the Data Structures Course Daniel J. Ernst, Daniel of data structures has historically been taught with two major focuses: first, the basic definition and implementation of a small set of basic data structures (e.g. list, stack, queue, tree, graph), and second

  14. Engineering Service Products: The Case of Mass-Customizing Service Agreements for Heavy Equipment

    E-Print Network [OSTI]

    Hsu, Cheng

    Technology and Management, 2005. 1 #12;ABSTRACT Service agreements are one-of-a-kind, and commit the service pronounced in the Information Technology (IT) industry and the IT-based non-manufacturing service sector they need. We submit that the mass customization model of manufacturing can help solve the problem; however

  15. Custom Search New Tool for Next-Generation Cancer Treatments using Nanodiamonds

    E-Print Network [OSTI]

    Espinosa, Horacio D.

    Custom Search New Tool for Next-Generation Cancer Treatments using Nanodiamonds A research team: in one mode, the probe acts like a fountain pen, wherein drug-coated nanodiamonds serve as the ink and nanoparticles," says Espinosa. Using the Nanofountain Probe, the group injected tiny doses of nanodiamonds

  16. LASP Micro Bus--an integral aspect of mission customization Payload Accommodation

    E-Print Network [OSTI]

    Mojzsis, Stephen J.

    for the TSIS-2 acquisition of the Total and Spectral Solar Irradiance (TSSI) Climate Data Record (CDR), LEO exploration, cost-effective mission and spacecraft customization is achieved through whole-system synthesis organization creates the critical ethos necessary to produce a mission solution optimized for the data product

  17. US Department of Energy radioisotope customers with summary of radioisotope shipments, FY 1988

    SciTech Connect (OSTI)

    Van Houten, N.C.

    1989-06-01

    Pacific Northwest Laboratory (PNL) prepared this edition of the radioisotope customer list at the request of the Office of Health and Environmental Research (ER-73), Office of Energy Research, US Department of Energy (DOE). This is the 25th report in a series dating from 1964. This report covers DOE radioisotope sales and distribution activities by its facilities to domestic, foreign and other DOE facilities for FY 1988. The report is divided into five sections: radioisotope suppliers, facility contacts, and radioisotopes or services supplied; a list of customers, suppliers, and radioisotopes purchased; a list of radioisotopes purchased cross-referenced to customer numbers; geographic locations of radioisotope customers; and radioisotope sales and transfers -- FY 1988. Radioisotopes not previously reported in this series of reports were argon-37, arsenic-72, arsenic-73, bismuth-207, gadolinium-151, rhenium-188, rhodium-101, selenium-72, xenon-123 and zirconium-88. The total value of DOE radioisotope sales for FY 1988 was $11.1 million, an increase of 3% from FY 1987.

  18. UBC Social Ecological Economic Development Studies (SEEDS) Student Report Customer Awareness off and Participation in Sustainability

    E-Print Network [OSTI]

    sustainability initiatives, working with UBC Food Services and AMS Food Services to develop and conduct marketUBC Social Ecological Economic Development Studies (SEEDS) Student Report Customer Awareness off and Participation in Sustainability Mandy Cheng, Sara Harrison, Andria Lam, Cristina Machial, Lena Syrovy, Diana

  19. Saturday, 15 November 2008Science Centric | RSS feeds Google Custom Search

    E-Print Network [OSTI]

    Espinosa, Horacio D.

    current through... Solar power game-changer: 'Near perfect' absorption of sunlight, from all angles -- [4Saturday, 15 November 2008Science Centric | RSS feeds Google Custom Search HOME NEWS TRAVEL ART patients Dye-coated glass to channel energy into solar cells Intestinal bacteria promote - and prevent

  20. Start > Control Panel > Power Options Customize settings in the Power Schemes tab

    E-Print Network [OSTI]

    Hammack, Richard

    .com/vcugoesgreen @vcugoesgreen Dock > System Preferences Customize settings in Energy Saver Suggested Guidlines: Turn off Monitor computer instead of a desktop and monitor Screen"savers"actually use energy: turn yours off by going to: 5 min System Standby: 20 min 1. 2. 1. 2. ADDITIONALTIPS You can also save energy by using a laptop

  1. CsI Time Resolution Study with Custom Built Digitizer for the KOTO Emily Casey

    E-Print Network [OSTI]

    CsI Time Resolution Study with Custom Built Digitizer for the KOTO Experiment Emily Casey Advisor, the system behavior should not change. When this principal is broken, we say that CP symmetry has been violated. The Standard Model predicts that the branching ratio of the golden decay should be 2.8 ± 0.4 × 10

  2. Factored Models for Multiscale Decision-Making in Smart Grid Customers Prashant P. Reddy

    E-Print Network [OSTI]

    Veloso, Manuela M.

    of customers in the management of demand, and renewable energy supply, is a critical goal of the Smart Grid as consumers, producers and storage facilities or more explicitly as suburban homes, office complexes, solar at the granularity of a single household with each appliance modeled separately, at the aggregate behavior

  3. Spatial Data Mining, Michael May, Fraunhofer AIS 1 Spatial Data Mining for Customer

    E-Print Network [OSTI]

    Morik, Katharina

    Spatial Data Mining, Michael May, Fraunhofer AIS 1 Spatial Data Mining for Customer Segmentation Data Mining in Practice Seminar, Dortmund, 2003 Dr. Michael May Fraunhofer Institut Autonome Intelligente Systeme #12;Spatial Data Mining, Michael May, Fraunhofer AIS 2 Introduction: a classic example

  4. Custom 3D-Printed Rollers for Frieze Pattern Cookies Robert Hanson

    E-Print Network [OSTI]

    Custom 3D-Printed Rollers for Frieze Pattern Cookies Robert Hanson Towson University, Emeritus a method for converting images of repeating patterns, e.g., Roman friezes or Escher tessellations, into 3D-printed the world of mathematics and the art of cooking. Fractal cookies based on stretching and folding [1] and 3D-printed

  5. Demand Response from Day-Ahead Hourly Pricing for Large Customers

    SciTech Connect (OSTI)

    Hopper, Nicole; Goldman, Charles; Neenan, Bernie

    2006-04-15

    Day-ahead default-service RTP for large customers not only improves the linkage between wholesale and retail markets, but also promotes the development of retail competition. The default service sets a standard for competitive alternatives and its structure shapes the types of retail market products that develop. (author)

  6. United States Home Information Center | Customer Support | Site Map Track Shipments

    E-Print Network [OSTI]

    Bartholdi III, John J.

    United States Home Information Center | Customer Support | Site Map Search Track Shipments Detailed your detailed tracking results (optional) Enter your email, submit up to three email addresses | Service Info | About FedEx | Investor Relations | Careers | fedex.com Terms of Use | Privacy Policy

  7. United States Home Information Center | Customer Support | Site Map Track Shipments

    E-Print Network [OSTI]

    Bartholdi III, John J.

    United States Home Information Center | Customer Support | Site Map Search Track Shipments Detailed results (optional) Enter your email, submit up to three email addresses (separated by commas), add yourEx | Investor Relations | Careers | fedex.com Terms of Use | Privacy Policy This site is protected by copyright

  8. CONNECTINGWITH OUR CUSTOMERS Texas A&M Information Technology 2011 ANNUAL REPORT

    E-Print Network [OSTI]

    CONNECTINGWITH OUR CUSTOMERS Texas A&M Information Technology 2011 ANNUAL REPORT #12;Today's information technology is such a routine and reliable part of university life that IT is often seen as a basic Provost for Information Technology and Chief Information Officer Texas A&M University Letter from the CIO

  9. Under Review -(c) IEEE 2012 Inexpensive and Easily Customized Tactile Array

    E-Print Network [OSTI]

    1 Under Review - (c) IEEE 2012 Inexpensive and Easily Customized Tactile Array Sensors using MEMS include a MEMS pressure sensor, temperature sensor, instru- mentation amplifier, analog Sciences Abstract--This paper presents a new approach to the con- struction of tactile array sensors based

  10. TopSURV 8: Creating a Custom Code Library Oscar R. Cantu'

    E-Print Network [OSTI]

    Ghilani, Charles

    ). They control the field observation's Point Symbol, Color, Layer, etc. · Using the Data Entry method of Codes with sorting Point Symbols, Layers, Colors, etc. · Using the Data Entry method of Notes, users are not ableTopSURV 8: Creating a Custom Code Library Oscar R. Cantu' June 2011 #12;June 2011 · Data Entry

  11. JMU SURPLUS BICYCLE PROGRAM WEB SITE JMU offers University departments and individual employees ("Customer") the

    E-Print Network [OSTI]

    Arnold, Elizabeth A.

    JMU SURPLUS BICYCLE PROGRAM WEB SITE JMU offers University departments and individual employees ("Customer") the opportunity to select and borrow a Surplus Property bicycle for up to one year the bicycle to others. The following procedures must be followed to qualify for this program. Since the costs

  12. Compiler-directed Customization of ASIP Cores T Vinod Kumar Gupta

    E-Print Network [OSTI]

    Barua, Rajeev

    components yield lower cost than custom chips. The trend towards implementing embedded systems as a system will yield lower run- time and/or lower cost and power consumption. Although ASIPs yield many advantages over for a specific application domain. They offer low design cost as they use pre-designed and verified components

  13. Antecedents and Benefits of the Preferred Customer Status in a Buyer-supplier

    E-Print Network [OSTI]

    Al Hanbali, Ahmad

    Antecedents and Benefits of the Preferred Customer Status in a Buyer-supplier Relationship GmbH and three of its key suppliers outline the antecedents, benefits and the history of the status Becker has with its key supplier develop both evolutionary and by episodes. Supervisor: Prof. Dr. habil

  14. DRIVE Analysis Tool Generates Custom Vehicle Drive Cycles Based on Real-World Data (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-04-01

    This fact sheet from the National Renewable Energy Laboratory describes the Drive-Cycle Rapid Investigation, Visualization, and Evaluation (DRIVE) analysis tool, which uses GPS and controller area network data to characterize vehicle operation and produce custom vehicle drive cycles, analyzing thousands of hours of data in a matter of minutes.

  15. ---Search Finance Home Yahoo! Help Welcome, dalemeade08540 [ ]Sign Out -My Yahoo! View Customize

    E-Print Network [OSTI]

    - - -Search Finance Home Yahoo! Help Welcome, dalemeade08540 [ ]Sign Out -My Yahoo! View Customize Financial News Enter symbol(s) Basic Get Symbol Lookup Associated Press EU Expected to Offer Japan Bigger, Russia, South Korea and China plan to join forces to research uses of fusion energy to create clean, long-term

  16. Control and Protection of Power Electronics Interfaced Distri-buted Generation Systems in a Customer-Driven Microgrid

    E-Print Network [OSTI]

    Tolbert, Leon M.

    in a Customer-Driven Microgrid Fang Z. Peng, Yun Wei Li and Leon M. Tolbert Abstract ­ This paper discusses-driven microgrid (CDM). Particularly, the following topics will be addressed: microgrid system configurations); renewable energy source (RES); micro-source; microgrid; customer-driven micro- grid (CDM), power electronics

  17. DOE Zero Energy Ready Home Case Study: Sterling Brook Custom Homes — Village Park Eco Home, Double Park, TX

    SciTech Connect (OSTI)

    none,

    2014-09-01

    This builder won a Custom Builder honor in the 2014 Housing Innovation Awards for this showcase home that serves as an energy-efficient model home for the custom home builder: 1,300 visitors toured the home, thousands more learned about the home’s advanced construction via the webpage, YouTube, Twitter, Facebook, Instagram, and Pinterest.

  18. Customer Impact Evaluation for the 2009 Southern California Edison Participating Load Pilot

    SciTech Connect (OSTI)

    Gifford, William; Bodmann, Shawn; Young, Paul; Eto, Joseph H.; Laundergan, Jeremy

    2010-05-28

    The 2009 Participating Load Pilot Customer Impact Evaluation provides evidence that short duration demand response events which cycle off air conditioners for less than thirty minutes in a hot, dry environment do not lead to a significant degradation in the comfort level of residents participating in the program. This was investigated using: (1) Analysis of interval temperature data collected from inside residences of select program participants; and (2) Direct and indirect customer feedback from surveys designed and implemented by Southern California Edison at the conclusion of the program season. There were 100 indoor temperature monitors that were acquired by LBNL for this study that transmitted temperature readings at least once per hour with corresponding timestamps during the program season, June-October, 2009. Recorded temperatures were transferred from the onsite telemetry devices to a mesh network, stored, and then delivered to KEMA for analysis. Following an extensive data quality review, temperature increases during each of the thirty demand response test events were calculated for each device. The results are as follows: (1) Even for tests taking place during outside temperatures in excess of 100 degrees Fahrenheit, over 85 percent of the devices measured less than a 0.5 degree Fahrenheit temperature increase indoors during the duration of the event. (2) For the increases that were observed, none was more than 5 degrees and it was extremely rare for increases to be more than 2 degrees. At the end of the testing season SCE and KEMA designed and conducted a survey of the a facilities and public works managers and approximately 100 customers feedback survey to assess the extent the PLP events were noticed or disrupted the comfort level of participants. While only a small sampling of 3 managers and 16 customer surveys were completed, their responses indicate: (1) No customer reported even a moderate level of discomfort from the cycling-off of their air conditioners during test events; and (2) Very few customers noticed any of the thirty events at all. The results of this study suggest that the impacts on comfort from short-duration interruptions of air-conditioners, even in very hot climates, are for the most part very modest, if they are even noticed at all. Still, we should expect that these impacts will increase with longer interruptions of air-conditioning. By the same token, we should also expect that they will be less significant in cooler climates.

  19. A framework and review of customer outage costs: Integration and analysis of electric utility outage cost surveys

    SciTech Connect (OSTI)

    Lawton, Leora; Sullivan, Michael; Van Liere, Kent; Katz, Aaron; Eto, Joseph

    2003-11-01

    A clear understanding of the monetary value that customers place on reliability and the factors that give rise to higher and lower values is an essential tool in determining investment in the grid. The recent National Transmission Grid Study recognizes the need for this information as one of growing importance for both public and private decision makers. In response, the U.S. Department of Energy has undertaken this study, as a first step toward addressing the current absence of consistent data needed to support better estimates of the economic value of electricity reliability. Twenty-four studies, conducted by eight electric utilities between 1989 and 2002 representing residential and commercial/industrial (small, medium and large) customer groups, were chosen for analysis. The studies cover virtually all of the Southeast, most of the western United States, including California, rural Washington and Oregon, and the Midwest south and east of Chicago. All variables were standardized to a consistent metric and dollar amounts were adjusted to the 2002 CPI. The data were then incorporated into a meta-database in which each outage scenario (e.g., the lost of electric service for one hour on a weekday summer afternoon) is treated as an independent case or record both to permit comparisons between outage characteristics and to increase the statistical power of analysis results. Unadjusted average outage costs and Tobit models that estimate customer damage functions are presented. The customer damage functions express customer outage costs for a given outage scenario and customer class as a function of location, time of day, consumption, and business type. One can use the damage functions to calculate outage costs for specific customer types. For example, using the customer damage functions, the cost experienced by an ''average'' customer resulting from a 1 hour summer afternoon outage is estimated to be approximately $3 for a residential customer, $1,200 for small-medium commercial and industrial customer, and $82,000 for large commercial and industrial customer. Future work to improve the quality and coverage of information on the value of electricity reliability to customers is described.

  20. Velocity of sound measurements in gaseous per-fluorocarbons and their custom mixtures

    E-Print Network [OSTI]

    Vacek, V; Lindsay, S

    2000-01-01

    An inexpensive sonar instrument was prepared for measurements of sound velocity in two fluorocarbon vapors; per-fluoro-n-propane (C3F8), per-fluoro-n-butane (C4F10), and their custom mixtures. The apparatus, measurement principle and instrument software are described. All sound velocity measurements in per-fluorocarbons were made in the low pressure range between 0.01 and 0.4 MPa, and at temperatures between 253 and 303 K. The purity of the C3F8 and C4F10 samples was checked using gas chromatography. Uncertainties in the speed of sound measurements were better than ± 0.1 %. Comparisons were made with theoretical predictions of sound velocity for the two individual components. The instrument was then used for concentration monitoring of custom C3F8/C4F10 mixtures.

  1. Estimating Demand Response Market Potential Among Large Commercialand Industrial Customers:A Scoping Study

    SciTech Connect (OSTI)

    Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan,Bernie; Cappers, Peter

    2007-01-01

    Demand response is increasingly recognized as an essentialingredient to well functioning electricity markets. This growingconsensus was formalized in the Energy Policy Act of 2005 (EPACT), whichestablished demand response as an official policy of the U.S. government,and directed states (and their electric utilities) to considerimplementing demand response, with a particular focus on "price-based"mechanisms. The resulting deliberations, along with a variety of stateand regional demand response initiatives, are raising important policyquestions: for example, How much demand response is enough? How much isavailable? From what sources? At what cost? The purpose of this scopingstudy is to examine analytical techniques and data sources to supportdemand response market assessments that can, in turn, answer the secondand third of these questions. We focus on demand response for large(>350 kW), commercial and industrial (C&I) customers, althoughmany of the concepts could equally be applied to similar programs andtariffs for small commercial and residential customers.

  2. A test of a multilevel model of personnel selection in a customer service organization 

    E-Print Network [OSTI]

    Sheehan, Mary Kathleen

    2005-02-17

    . The Schneider et al. (2000) model expanded the traditional approach to validating selection systems to include the impact that selection systems have on the broader organizational system. The current project provided an empirical test of this model... by extending the traditional individual-differences approach to validation research and including group- and organization-criteria (e.g., unit-level performance and customer satisfaction). Using a quasi-experimental design, archival data from a managerial...

  3. DOE Zero Energy Ready Home Case Study: Transformations, Inc., Custom House, Devens, Massachusetts

    SciTech Connect (OSTI)

    none,

    2013-09-01

    This single-family home features a superinsulated shell with 12-inch double walls filled with open cell spray foam, as well as R-5 triple-pane windows. The 18.33 kW photovoltaic system can produce all the electricity the home can use in a year with enough left over to power an electric car for 30,000 miles.These features helped the builder to win a 2013 Housing Innovation Award in the custom home category.

  4. Knowledge is power: How information alone can cause commercial customers to install energy-efficient measures

    SciTech Connect (OSTI)

    Garafalo, A.; Mulholland, C.

    1994-12-31

    As part of their overall efforts to encourage Commercial and Industrial customers to become more energy efficient, many utilities offer Energy Audit Programs. This type of program has two main purposes. First, it offers the utility`s commercial and industrial (C/I) customers the opportunity to identify ways in which they can increase the overall energy efficiency of their facilities through the installation of more energy-efficient lighting, space conditioning, thermal efficiency, and other measures. Secondly, audit programs offer a utility public relations value because such programs usually have a positive reception among customers. The first purpose, however, that of educating customers about the energy efficiency of their facilities, is the key to potential energy savings. Many audit programs are designed to feed directly into a utility`s rebate program, and thus offer good marketing opportunities for demand side management. Many utilities and regulatory bodies consider C/I audit programs to be non-resource or information-only programs. There are quantifiable benefits to these programs beyond the marketing leads they provide for the rebate programs. Since 1987, Applied Energy Group, Inc. (AEG) has been involved in the measurement of savings attributable to energy audit programs. Through years of development and refinement, AEG has developed a process which is able to identify savings attributable solely to a utility`s energy audit program, effectively netting out the results achieved through the efforts of a rebate program. This process also factors out free ridership and ensures that there is no double counting of savings between audit and rebate programs. The findings presented here focus on the work that AEG has done for two of its utility clients: Rochester Gas & Electric (RG&E) and Long Island Lighting Company (LILCO) during the course of evaluating their 1990 and 1991 C/I programs.

  5. Sit Down with Sabin: Henrik Scheller: Customizing plants for biofuels. (LBNL Summer Lecture Series)

    ScienceCinema (OSTI)

    Sabin, Russell; Scheller, Henrik

    2014-05-06

    Henrik Scheller from the JBEI appeared on August 3rd, 2011 for this installment of "Sit Down with Sabin," a conversation in which former reporter Sabin Russell chats with Lab staff about innovative science. They will discuss "Customizing plants for biofuels." During this series of conversations, Russell and Lab staff will explore the ups and downs of pioneering science, all without the aid of PowerPoints.

  6. Customer Comments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Doing Business Skip navigation links Financial Information Financial Public Processes Asset Management Cost Verification Process Rate Cases BP-16 Rate Case OS-14 Rate Case FRN...

  7. Custom Projects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding in ActinideRailCurrent ResearchInnovation

  8. Customer Comments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding in

  9. Customer interface document for the Molten Salt Test Loop (MSTL) system.

    SciTech Connect (OSTI)

    Pettit, Kathleen; Kolb, William J.; Gill, David Dennis; Briggs, Ronald D.

    2012-03-01

    The National Solar Thermal Test Facility at Sandia National Laboratories has a unique test capability called the Molten Salt Test Loop (MSTL) system. MSTL is a test capability that allows customers and researchers to test components in flowing, molten nitrate salt. The components tested can range from materials samples, to individual components such as flex hoses, ball joints, and valves, up to full solar collecting systems such as central receiver panels, parabolic troughs, or linear Fresnel systems. MSTL provides realistic conditions similar to a portion of a concentrating solar power facility. The facility currently uses 60/40 nitrate 'solar salt' and can circulate the salt at pressure up to 600psi, temperature to 585 C, and flow rate of 400-600GPM depending on temperature. The purpose of this document is to provide a basis for customers to evaluate the applicability to their testing needs, and to provide an outline of expectations for conducting testing on MSTL. The document can serve as the basis for testing agreements including Work for Others (WFO) and Cooperative Research and Development Agreements (CRADA). While this document provides the basis for these agreements and describes some of the requirements for testing using MSTL and on the site at Sandia, the document is not sufficient by itself as a test agreement. The document, however, does provide customers with a uniform set of information to begin the test planning process.

  10. Customer adoption of small-scale on-site power generation

    SciTech Connect (OSTI)

    Siddiqui, Afzal S.; Marnay, Chris; Hamachi, Kristina S.; Rubio, F. Javier

    2001-04-01

    The electricity supply system is undergoing major regulatory and technological change with significant implications for the way in which the sector will operate (including its patterns of carbon emissions) and for the policies required to ensure socially and environmentally desirable outcomes. One such change stems from the rapid emergence of viable small-scale (i.e., smaller than 500 kW) generators that are potentially competitive with grid delivered electricity, especially in combined heat and power configurations. Such distributed energy resources (DER) may be grouped together with loads in microgrids. These clusters could operate semi-autonomously from the established power system, or macrogrid, matching power quality and reliability more closely to local end-use requirements. In order to establish a capability for analyzing the effect that microgrids may have on typical commercial customers, such as office buildings, restaurants, shopping malls, and grocery stores, an economic mod el of DER adoption is being developed at Berkeley Lab. This model endeavors to indicate the optimal quantity and type of small on-site generation technologies that customers could employ given their electricity requirements. For various regulatory schemes and general economic conditions, this analysis produces a simple operating schedule for any installed generators. Early results suggest that many commercial customers can benefit economically from on-site generation, even without considering potential combined heat and power and reliability benefits, even though they are unlikely to disconnect from the established power system.

  11. A study of the demographic and program variables influencing customer satisfaction in the Texas Agricultural Extension Service 

    E-Print Network [OSTI]

    Bondurant, Susan Elizabeth

    1999-01-01

    The purpose of this study was to determine the levels of satisfaction for customers of the Texas Agricultural Extension Service (TAEX) according to gender, age, place of residence, education levels, and racial/ethnic backgrounds and to determine...

  12. Design and performance evaluation of an electric go-kart and custom permanent magnet brushless DC motor

    E-Print Network [OSTI]

    Davis, Eli Marc

    2012-01-01

    This undergraduate thesis documents the design considerations and specifications of building a personal battery-powered go-kart. This includes designing and building a custom brushless DC motor for use in the drivetrain. ...

  13. Mass-customization in commercial real estate : how the aviation industry can help us create beautiful buildings that add value

    E-Print Network [OSTI]

    Goldklang, Shaul

    2013-01-01

    The term "mass-customization" in the Architecture, Engineering and Construction (AEC) industry refers to architectural elements that have similar purpose but are completely different from each other. Architects use ...

  14. Customer response to day-ahead wholesale market electricity prices: Case study of RTP program experience in New York

    SciTech Connect (OSTI)

    Goldman, C.; Hopper, N.; Sezgen, O.; Moezzi, M.; Bharvirkar, R.; Neenan, B.; Boisvert, R.; Cappers, P.; Pratt, D.

    2004-07-01

    There is growing interest in policies, programs and tariffs that encourage customer loads to provide demand response (DR) to help discipline wholesale electricity markets. Proposals at the retail level range from eliminating fixed rate tariffs as the default service for some or all customer groups to reinstituting utility-sponsored load management programs with market-based inducements to curtail. Alternative rate designs include time-of-use (TOU), day-ahead real-time pricing (RTP), critical peak pricing, and even pricing usage at real-time market balancing prices. Some Independent System Operators (ISOs) have implemented their own DR programs whereby load curtailment capabilities are treated as a system resource and are paid an equivalent value. The resulting load reductions from these tariffs and programs provide a variety of benefits, including limiting the ability of suppliers to increase spot and long-term market-clearing prices above competitive levels (Neenan et al., 2002; Boren stein, 2002; Ruff, 2002). Unfortunately, there is little information in the public domain to characterize and quantify how customers actually respond to these alternative dynamic pricing schemes. A few empirical studies of large customer RTP response have shown modest results for most customers, with a few very price-responsive customers providing most of the aggregate response (Herriges et al., 1993; Schwarz et al., 2002). However, these studies examined response to voluntary, two-part RTP programs implemented by utilities in states without retail competition.1 Furthermore, the researchers had limited information on customer characteristics so they were unable to identify the drivers to price response. In the absence of a compelling characterization of why customers join RTP programs and how they respond to prices, many initiatives to modernize retail electricity rates seem to be stymied.

  15. Suggestions for dealership development to suit needs of a new kind of John Deere customer: a study of 

    E-Print Network [OSTI]

    Pospeshnova, Maria Alexandrovna

    2006-08-16

    SUGGESTIONS FOR DEALERSHIP DEVELOPMENT TO SUIT NEEDS OF A NEW KIND OF JOHN DEERE CUSTOMER: A STUDY OF ?LARGE PROPERTY OWNERS? AND THEIR PREFERENCES A Thesis by MARIA ALEXANDROVNA POSPESHNOVA Submitted to the Office of Graduate... DEERE CUSTOMER: A STUDY OF ?LARGE PROPERTY OWNERS? AND THEIR PREFERENCES A Thesis by MARIA ALEXANDROVNA POSPESHNOVA Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements...

  16. Distributed energy resources in practice: A case study analysis and validation of LBNL's customer adoption model

    SciTech Connect (OSTI)

    Bailey, Owen; Creighton, Charles; Firestone, Ryan; Marnay, Chris; Stadler, Michael

    2003-02-01

    This report describes a Berkeley Lab effort to model the economics and operation of small-scale (<500 kW) on-site electricity generators based on real-world installations at several example customer sites. This work builds upon the previous development of the Distributed Energy Resource Customer Adoption Model (DER-CAM), a tool designed to find the optimal combination of installed equipment, and idealized operating schedule, that would minimize the site's energy bills, given performance and cost data on available DER technologies, utility tariffs, and site electrical and thermal loads over a historic test period, usually a recent year. This study offered the first opportunity to apply DER-CAM in a real-world setting and evaluate its modeling results. DER-CAM has three possible applications: first, it can be used to guide choices of equipment at specific sites, or provide general solutions for example sites and propose good choices for sites with similar circumstances; second, it can additionally provide the basis for the operations of installed on-site generation; and third, it can be used to assess the market potential of technologies by anticipating which kinds of customers might find various technologies attractive. A list of approximately 90 DER candidate sites was compiled and each site's DER characteristics and their willingness to volunteer information was assessed, producing detailed information on about 15 sites of which five sites were analyzed in depth. The five sites were not intended to provide a random sample, rather they were chosen to provide some diversity of business activity, geography, and technology. More importantly, they were chosen in the hope of finding examples of true business decisions made based on somewhat sophisticated analyses, and pilot or demonstration projects were avoided. Information on the benefits and pitfalls of implementing a DER system was also presented from an additional ten sites including agriculture, education, health care, airport, and manufacturing facilities.

  17. Instrument Qualification of Custom Fabricated Water Activity Meter for Hot Cell Use

    SciTech Connect (OSTI)

    McCoskey, Jacob K.

    2014-01-22

    This report describes a custom fabricated water activity meter and the results of the qualification of this meter as described in the laboratory test plan LAB-PLN-11-00012, Testing and Validation of an Enhanced Acquisition and Control System. It was calibrated against several NaOH solutions of varying concentrations to quantify the accuracy and precision of the instrument at 20 °C and 60 °C. Also, a schematic and parts list of the equipment used to make the water activity meter will be presented in this report.

  18. Customized oligonucleotide microchips that convert multiple genetic information to simple patterns, are portable and reusable

    DOE Patents [OSTI]

    Mirzabekov, Andrei (Darien, IL); Guschin, Dmitry Y. (Rockville, MD); Chik, Valentine (Woodridge, IL); Drobyshev, Aleksei (Elektrosol, RU); Fotin, Alexander (Cambridge, MA); Yershov, Gennadiy (Hinsdale, IL); Lysov, Yuri (Hinsdale, IL)

    2002-01-01

    This invention relates to using customized oligonucleotide microchips as biosensors for the detection and identification of nucleic acids specific for different genes, organisms and/or individuals in the environment, in food and in biological samples. The microchips are designed to convert multiple bits of genetic information into simpler patterns of signals that are interpreted as a unit. Because of an improved method of hybridizing oligonucleotides from samples to microchips, microchips are reusable and transportable. For field study, portable laser or bar code scanners are suitable.

  19. Dimensions of service quality of the University of Arizona Sponsored Projects Services Office internal customers 

    E-Print Network [OSTI]

    Baca, David Ray

    2007-04-25

    of Arizona Sponsored Projects Services Office Internal Customers. (December 2006) David Ray Baca, B.S., Texas A&M University; M.L.I.S. The University of Texas at Austin Chair of Advisory Committee: Dr. Bryan Cole When a service transaction occurs..., confidant and dear friend. When I walked into your office and you announced that you had registered me in the MLIS program at the University of Texas I was dumbstruck by your nerve and foresight. I still am. You will live in my thoughts and heart forever...

  20. Sales to Ultimate Customers (Megawatthours) by State by Sector by Provider, 1990

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Informationmonthly gasoline price toStocks 2009CubicAnalysis &V 1997Sales to Ultimate Customers

  1. Customized atomic force microscopy probe by focused-ion-beam-assisted tip

    Office of Scientific and Technical Information (OSTI)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfate Reducing BacteriaConnect Collidertransfer (Journal Article) | SciTech Connect Customized

  2. Custom data support for the FAst -physics System Testbed and Research (FASTER) Project

    SciTech Connect (OSTI)

    Toto, T.; Jensen, M.; Vogelmann, A.; Wagener, R.; Liu, Y.; Lin, W.

    2010-03-15

    The multi-institution FAst -physics System Testbed and Research (FASTER) project, funded by the DOE Earth System Modeling program, aims to evaluate and improve the parameterizations of fast processes (those involving clouds, precipitation and aerosols) in global climate models, using a combination of numerical prediction models, single column models, cloud resolving models, large-eddy simulations, full global climate model output and ARM active and passive remote sensing and in-situ data. This poster presents the Custom Data Support effort for the FASTER project. The effort will provide tailored datasets, statistics, best estimates and quality control data, as needed and defined by FASTER participants, for use in evaluating and improving parameterizations of fast processes in GCMs. The data support will include custom gridding and averaging, for the model of interest, using high time resolution and pixel level data from continuous ARM observations and complementary datasets. In addition to the FASTER team, these datasets will be made available to the ARM Science Team. Initial efforts with respect to data product development, priorities, availability and distribution are summarized here with an emphasis on cloud, atmospheric state and aerosol properties as observed during the Spring 2000 Cloud IOP and the Spring 2003 Aerosol IOP at the ARM Southern Great Plains site.

  3. Astroparticle physics with a customized low-background broad energy Germanium detector

    SciTech Connect (OSTI)

    Aalseth, Craig E.; Amman, M.; Avignone, Frank T.; Back, Henning O.; Barabash, Alexander S.; Barbeau, P. S.; Bergevin, M.; Bertrand, F.; Boswell, M.; Brudanin, V.; Bugg, William; Burritt, Tom H.; Busch, Matthew; Capps, Greg L.; Chan, Yuen-Dat; Collar, J. I.; Cooper, R. J.; Creswick, R.; Detwiler, Jason A.; Diaz, J.; Doe, Peter J.; Efremenko, Yuri; Egorov, Viatcheslav; Ejiri, H.; Elliott, Steven R.; Ely, James H.; Esterline, James H.; Farach, H. A.; Fast, James E.; Fields, N.; Finnerty, P.; Fujikawa, Brian; Fuller, Erin S.; Gehman, Victor M.; Giovanetti, G. K.; Guiseppe, Vincente; Gusey, K.; Hallin, A. L.; Harper, Gregory; Hazama, R.; Henning, Reyco; Hime, Andrew; Hoppe, Eric W.; Hossbach, Todd W.; Howe, M. A.; Johnson, R. A.; Keeter, K.; Keillor, Martin E.; Keller, C.; Kephart, Jeremy D.; Kidd, Mary; Knecht, A.; Kochetov, Oleg; Konovalov, S.; Kouzes, Richard T.; Leviner, L.; Loach, J. C.; Luke, P.; MacMullin, S.; Marino, Michael G.; Martin, R. D.; Mei, Dong-Ming; Miley, Harry S.; Miller, M. L.; Mizouni, Leila; Myers, Allan W.; Nomachi, Masaharu; Orrell, John L.; Peterson, David; Phillips, D.; Poon, Alan; Prior, Gersende; Qian, J.; Radford, D. C.; Rielage, Keith; Robertson, R. G. H.; Rodriguez, Larry; Rykaczewski, Krzysztof P.; Salazar, Harold; Schubert, Alexis G.; Shima, T.; Shirchenko, M.; Steele, David; Strain, J.; Swift, Gary; Thomas, K.; Timkin, V.; Tornow, W.; Van Wechel, T. D.; Vanyushin, I.; Varner, R. L.; Vetter, Kai; Wilkerson, J. F.; Wolfe, B. A.; Xiang, W.; Yakushev, E.; Yaver, Harold; Young, A.; Yu, Chang-Hong; Yumatov, Vladimir; Zhang, C.; Zimmerman, S.

    2011-10-01

    The Majorana Collaboration is building the Majorana Demonstrator, a 60 kg array of high purity germanium detectors housed in an ultra-low background shield at the Sanford Underground Laboratory in Lead, SD. The Majorana Demonstrator will search for neutrinoless double-beta decay of 76Ge while demonstrating the feasibility of a tonne-scale experiment. It may also carry out a dark matter search in the 1-10 GeV/c² mass range. We have found that customized Broad Energy Germanium (BEGe) detectors produced by Canberra have several desirable features for a neutrinoless double-beta decay experiment, including low electronic noise, excellent pulse shape analysis capabilities, and simple fabrication. We have deployed a customized BEGe, the Majorana Low-Background BEGe at Kimballton (MALBEK), in a low-background cryostat and shield at the Kimballton Underground Research Facility in Virginia. This paper will focus on the detector characteristics and measurements that can be performed with such a radiation detector in a low-background environment.

  4. RASTtk: A modular and extensible implementation of the RAST algorithm for building custom annotation pipelines and annotating batches of genomes

    SciTech Connect (OSTI)

    Brettin, Thomas; Davis, James J.; Disz, Terry; Edwards, Robert A.; Gerdes, Svetlana; Olsen, Gary J.; Olson, Robert; Overbeek, Ross; Parrello, Bruce; Pusch, Gordon D.; Shukla, Maulik; Thomason, III, James A.; Stevens, Rick; Vonstein, Veronika; Wattam, Alice R.; Xia, Fangfang

    2015-02-10

    The RAST (Rapid Annotation using Subsystem Technology) annotation engine was built in 2008 to annotate bacterial and archaeal genomes. It works by offering a standard software pipeline for identifying genomic features (i.e., protein-encoding genes and RNA) and annotating their functions. Recently, in order to make RAST a more useful research tool and to keep pace with advancements in bioinformatics, it has become desirable to build a version of RAST that is both customizable and extensible. In this paper, we describe the RAST tool kit (RASTtk), a modular version of RAST that enables researchers to build custom annotation pipelines. RASTtk offers a choice of software for identifying and annotating genomic features as well as the ability to add custom features to an annotation job. RASTtk also accommodates the batch submission of genomes and the ability to customize annotation protocols for batch submissions. This is the first major software restructuring of RAST since its inception.

  5. RASTtk: A modular and extensible implementation of the RAST algorithm for building custom annotation pipelines and annotating batches of genomes

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Brettin, Thomas; Davis, James J.; Disz, Terry; Edwards, Robert A.; Gerdes, Svetlana; Olsen, Gary J.; Olson, Robert; Overbeek, Ross; Parrello, Bruce; Pusch, Gordon D.; et al

    2015-02-10

    The RAST (Rapid Annotation using Subsystem Technology) annotation engine was built in 2008 to annotate bacterial and archaeal genomes. It works by offering a standard software pipeline for identifying genomic features (i.e., protein-encoding genes and RNA) and annotating their functions. Recently, in order to make RAST a more useful research tool and to keep pace with advancements in bioinformatics, it has become desirable to build a version of RAST that is both customizable and extensible. In this paper, we describe the RAST tool kit (RASTtk), a modular version of RAST that enables researchers to build custom annotation pipelines. RASTtk offersmore »a choice of software for identifying and annotating genomic features as well as the ability to add custom features to an annotation job. RASTtk also accommodates the batch submission of genomes and the ability to customize annotation protocols for batch submissions. This is the first major software restructuring of RAST since its inception.« less

  6. The Impact of Rate Design and Net Metering on the Bill Savings from Distributed PV for Residential Customers in California

    SciTech Connect (OSTI)

    Darghouth, Naim; Barbose, Galen; Wiser, Ryan

    2010-03-30

    Net metering has become a widespread policy in the U.S. for supporting distributed photovoltaics (PV) adoption. Though specific design details vary, net metering allows customers with PV to reduce their electric bills by offsetting their consumption with PV generation, independent of the timing of the generation relative to consumption - in effect, compensating the PV generation at retail electricity rates (Rose et al. 2009). While net metering has played an important role in jump-starting the residential PV market in the U.S., challenges to net metering policies have emerged in a number of states and contexts, and alternative compensation methods are under consideration. Moreover, one inherent feature of net metering is that the value of the utility bill savings it provides to customers with PV depends heavily on the structure of the underlying retail electricity rate, as well as on the characteristics of the customer and PV system. Consequently, the value of net metering - and the impact of moving to alternative compensation mechanisms - can vary substantially from one customer to the next. For these reasons, it is important for policymakers and others that seek to support the development of distributed PV to understand both how the bill savings varies under net metering, and how the bill savings under net metering compares to other possible compensation mechanisms. To advance this understanding, we analyze the bill savings from PV for residential customers of California's two largest electric utilities, Pacific Gas and Electric (PG&E) and Southern California Edison (SCE). The analysis is based on hourly load data from a sample of 215 residential customers located in the service territories of the two utilities, matched with simulated hourly PV production for the same time period based on data from the nearest of 73 weather stations in the state.

  7. American Recovery and Reinvestment Act Federal Energy Management Program Technical Assistance Project 184 U.S. Customs and Border Protection Data Center, Springfield, Virginia

    SciTech Connect (OSTI)

    Arends, J.; Sandusky, William F.

    2010-09-30

    This report documents the findings of an on-site energy audit of the U.S. Customs and Border Protection (CBP) Data Center in Springfield, Virginia.

  8. American Recovery and Reinvestment Act Federal Energy Management Program Technical Assistance Project 184 U.S. Customs and Border Protection Administrative and Laboratory Building, Springfield, Virginia

    SciTech Connect (OSTI)

    Arends, J.; Sandusky, William F.

    2010-09-30

    This report documents the findings of an on-site energy audit of the U.S. Customs and Border Protection Laboratory in Springfield, Virginia.

  9. Energy Efficiency and Renewable Energy Network (EREN) customer satisfaction survey, 1997. Final report

    SciTech Connect (OSTI)

    Anderson, A.V. [Information International Associates, Inc., Oak Ridge, TN (United States); Henderson, D.P. [USDOE Office of Scientific and Technical Information (OSTI), Oak Ridge, TN (United States)

    1997-07-01

    the EREN Customer Satisfaction Survey 1997 was designed to follow up the results of the 1995-96 Surveys, enabling comparison to the 1995- 96 baseline, and to provide additional qualitative feedback about EREN. Both the 1995-96 and 1997 Surveys had these objectives: Identify and define actual EREN users; Determine the value or benefits derived from the use of EREN; Determine the kind and quality of services that users want; Determine the users` levels of satisfaction with existing services; Determine users` preferences in both the sources of service and means of delivery; and Establish continuous quality improvement measures. This report presents the methodology used, scope and limitations of the study, description of the survey instrument, and findings regarding demographics, technical capabilities, usage patterns, general use, importance of and satisfaction with resources, and additional information and comments.

  10. Distributed energy resources customer adoption modeling with combined heat and power applications

    SciTech Connect (OSTI)

    Siddiqui, Afzal S.; Firestone, Ryan M.; Ghosh, Srijay; Stadler, Michael; Edwards, Jennifer L.; Marnay, Chris

    2003-07-01

    In this report, an economic model of customer adoption of distributed energy resources (DER) is developed. It covers progress on the DER project for the California Energy Commission (CEC) at Berkeley Lab during the period July 2001 through Dec 2002 in the Consortium for Electric Reliability Technology Solutions (CERTS) Distributed Energy Resources Integration (DERI) project. CERTS has developed a specific paradigm of distributed energy deployment, the CERTS Microgrid (as described in Lasseter et al. 2002). The primary goal of CERTS distributed generation research is to solve the technical problems required to make the CERTS Microgrid a viable technology, and Berkeley Lab's contribution is to direct the technical research proceeding at CERTS partner sites towards the most productive engineering problems. The work reported herein is somewhat more widely applicable, so it will be described within the context of a generic microgrid (mGrid). Current work focuses on the implementation of combined heat and power (CHP) capability. A mGrid as generically defined for this work is a semiautonomous grouping of generating sources and end-use electrical loads and heat sinks that share heat and power. Equipment is clustered and operated for the benefit of its owners. Although it can function independently of the traditional power system, or macrogrid, the mGrid is usually interconnected and exchanges energy and possibly ancillary services with the macrogrid. In contrast to the traditional centralized paradigm, the design, implementation, operation, and expansion of the mGrid is meant to optimize the overall energy system requirements of participating customers rather than the objectives and requirements of the macrogrid.

  11. Web Application Testing with Customized Test Requirements--An Experimental Comparison Study Technical Report No. 2006-330

    E-Print Network [OSTI]

    Sampath, Sreedevi

    - quirements. 1.. Introduction Test requirement coverage is an important and well accepted measure for deciding when to stop testing, selecting test cases, and reducing test suites. Test coverage criteria defineWeb Application Testing with Customized Test Requirements--An Experimental Comparison Study

  12. The Impact of Rate Design and Net Metering on the Bill Savings from Distributed PV for Residential Customers in California

    SciTech Connect (OSTI)

    Energy and Resources Group, University of California, Berkeley; Darghouth, Naim R.; Barbose, Galen; Wiser, Ryan

    2011-06-01

    Net metering has become a widespread mechanism in the U.S. for supporting customer adoption of distributed photovoltaics (PV), but has faced challenges as PV installations grow to a larger share of generation in a number of states. This paper examines the value of the bill savings that customers receive under net metering, and the associated role of retail rate design, based on a sample of approximately two hundred residential customers of California's two largest electric utilities. We find that the bill savings per kWh of PV electricity generated varies by more than a factor of four across the customers in the sample, which is largely attributable to the inclining block structure of the utilities' residential retail rates. We also compare the bill savings under net metering to that received under three potential alternative compensation mechanisms, based on California's Market Price Referent (MPR). We find that net metering provides significantly greater bill savings than a full MPR-based feed-in tariff, but only modestly greater savings than alternative mechanisms under which hourly or monthly net excess generation is compensated at the MPR rate.

  13. A CUSTOM-DESIG ED LIMITED-A GLE ACTUATOR FOR A ELECTROMECHA ICAL E GI E VALVE DRIVE

    E-Print Network [OSTI]

    Perreault, Dave

    A CUSTOM-DESIG ED LIMITED-A GLE ACTUATOR FOR A ELECTROMECHA ICAL E GI E VALVE DRIVE PART II@alum.mit.edu Keywords: Variable valve timing, electromechanical valve drive, limited-angle actuator, low inertia armature, aluminium conductor. Abstract Research has shown that variable valve timing (VVT) can improve

  14. A CUSTOM-DESIG ED LIMITED-A GLE ACTUATOR FOR A ELECTROMECHA ICAL E GI E VALVE DRIVE

    E-Print Network [OSTI]

    Perreault, Dave

    A CUSTOM-DESIG ED LIMITED-A GLE ACTUATOR FOR A ELECTROMECHA ICAL E GI E VALVE DRIVE PART I: CO@alum.mit.edu Keywords: Variable valve timing, electromechanical valve drive, limited-angle actuator, low inertia armature, aluminium conductor. Abstract Research has shown that variable valve timing (VVT) can improve

  15. A reconfigurable data-driven datapath architecture for ALUs is presented which may be used for custom comput-

    E-Print Network [OSTI]

    Hartenstein, Reiner

    Abstract A reconfigurable data-driven datapath architecture for ALUs is presented which may be used for custom comput- ing machines (CCMs), Xputers (a class of CCMs) and other adaptable computer systems of an accelerator board and a host, support function calls from high level languages to be exe- cuted

  16. IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 20, NO. 6, NOVEMBER 2005 1499 Custom Spectral Shaping for EMI Reduction in

    E-Print Network [OSTI]

    IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 20, NO. 6, NOVEMBER 2005 1499 Custom Spectral Shaping), electronic ballast, frequency modulation (FM), resonant inverter, spread spectrum. I. INTRODUCTION HIGH-FREQUENCY (HF) ac sources are used in a va- riety of applications, including electronic ballasts where HF

  17. Queen's Printer for Ontario 2008 Resources Section of the e-course: Serve-Ability: Transforming Ontario's Customer Service,

    E-Print Network [OSTI]

    © Queen's Printer for Ontario 2008 Resources Section of the e-course: Serve-Ability: Transforming Ontario's Customer Service, Accessibility Directorate of Ontario, Ministry of Community and Social;© Queen's Printer for Ontario 2008 Resources Section of the e-course: Serve-Ability: Transforming Ontario

  18. Tuesday, July 14th, 2009 Advances in GIScience: Research Session 2 A Customization of the Arc Marine

    E-Print Network [OSTI]

    Wright, Dawn Jeannine

    Advances in GIScience: Research Session 2 Foundation data types: 0:20/0:50 #12;Tuesday, July 14th, 2009Tuesday, July 14th, 2009 Advances in GIScience: Research Session 2 A Customization of the Arc State University Title Slide: 0:00/0:00 #12;2 Tuesday, July 14th, 2009 Advances in GIScience: Research

  19. SPACE WEATHER, VOL. 11, 529541, doi:10.1002/swe.20092, 2013 A survey of customers of space

    E-Print Network [OSTI]

    Schrijver, Karel

    SPACE WEATHER, VOL. 11, 529­541, doi:10.1002/swe.20092, 2013 A survey of customers of space weather August 2013; published 24 September 2013. [1] We present an analysis of the users of space weather information based on 2783 responses to an online survey among subscribers of NOAA's Space Weather Prediction

  20. `I'll just pass you to Customer Service...' Communication Breakdown Between the Users and Suppliers of Clinical Technology

    E-Print Network [OSTI]

    Johnson, Chris

    `I'll just pass you to Customer Service...' Communication Breakdown Between the Users and Suppliers and suppliers. Recent mishaps have shown that clinicians may not know whether a device has actually from suppliers who may not have been directly responsible for the development of the device

  1. Paper presented at Bulk Power Systems Dynamics and Control IV -Restructuring, August 24-28, Santorini, Greece "The Dynamics of Customers Switching

    E-Print Network [OSTI]

    will seek to compete technologically and to profit from cost cutting innovations that ultimately may be translated through market pressures into lower prices for customers. The initial wave of deregulation losses, costs and capacity constraints may isolate customers from the effective reach of many generators

  2. The Program Administrator Cost of Saved Energy for Utility Customer-Funded Energy Efficiency Programs

    SciTech Connect (OSTI)

    Billingsley, Megan A.; Hoffman, Ian M.; Stuart, Elizabeth; Schiller, Steven R.; Goldman, Charles A.; LaCommare, Kristina

    2014-03-19

    End-use energy efficiency is increasingly being relied upon as a resource for meeting electricity and natural gas utility system needs within the United States. There is a direct connection between the maturation of energy efficiency as a resource and the need for consistent, high-quality data and reporting of efficiency program costs and impacts. To support this effort, LBNL initiated the Cost of Saved Energy Project (CSE Project) and created a Demand-Side Management (DSM) Program Impacts Database to provide a resource for policy makers, regulators, and the efficiency industry as a whole. This study is the first technical report of the LBNL CSE Project and provides an overview of the project scope, approach, and initial findings, including: • Providing a proof of concept that the program-level cost and savings data can be collected, organized, and analyzed in a systematic fashion; • Presenting initial program, sector, and portfolio level results for the program administrator CSE for a recent time period (2009-2011); and • Encouraging state and regional entities to establish common reporting definitions and formats that would make the collection and comparison of CSE data more reliable. The LBNL DSM Program Impacts Database includes the program results reported to state regulators by more than 100 program administrators in 31 states, primarily for the years 2009–2011. In total, we have compiled cost and energy savings data on more than 1,700 programs over one or more program-years for a total of more than 4,000 program-years’ worth of data, providing a rich dataset for analyses. We use the information to report costs-per-unit of electricity and natural gas savings for utility customer-funded, end-use energy efficiency programs. The program administrator CSE values are presented at national, state, and regional levels by market sector (e.g., commercial, industrial, residential) and by program type (e.g., residential whole home programs, commercial new construction, commercial/industrial custom rebate programs). In this report, the focus is on gross energy savings and the costs borne by the program administrator—including administration, payments to implementation contractors, marketing, incentives to program participants (end users) and both midstream and upstream trade allies, and evaluation costs. We collected data on net savings and costs incurred by program participants. However, there were insufficient data on participant cost contributions, and uncertainty and variability in the ways in which net savings were reported and defined across states (and program administrators).

  3. No damage to bulk storage but entire customer bases wiped out in storm

    SciTech Connect (OSTI)

    Not Available

    1992-10-01

    This paper reports that interviews with key LP-gas industry spokesmen in hurricane-ravaged South Florida following Andrew's terrifying visit presented a picture of unimaginable destruction and nearly immeasurable losses of property but miraculously, not a single significant incident involving leaks or the loss of bulk storage. In the worst reports of damage to propane company facilities, Homestead Gas loss at least one building and the Suburban/Petrolane office building in Homestead no longer exists. (Temporary office arrangements were established by Suburban/Petrolane.) The customer base of these companies has been hit very had. For a while, it appeared that one Suburban/Petrolane employee was unaccounted for but that report turned out to be false. Shortly after the storm, crews were out securing gas systems in whatever locations they could reach. In one instance in which regular travel proved impossible, the gas company was forced to travel the long way around-pulling resources out of its Key West district and going north to Homestead. It became necessary in many cases for personnel to purchase cellular phones in order to maintain contact between the office and field crew.

  4. Design and development of the Waukesha Custom Engine Control Air/Fuel Module

    SciTech Connect (OSTI)

    Moss, D.W.

    1996-12-31

    The Waukesha Custom Engine Control Air/Fuel Module (AFM) is designed to control the air-fuel ratio for all Waukesha carbureted, gaseous fueled, industrial engine. The AFM is programmed with a personal computer to run in one of four control modes: catalyst, best power, best economy, or lean-burn. One system can control naturally aspirated, turbocharged, in-line or vee engines. The basic system consists of an oxygen sensing system, intake manifold pressure transducer, electronic control module, actuator and exhaust thermocouple. The system permits correct operation of Waukesha engines in spite of changes in fuel pressure or temperature, engine load or speed, and fuel composition. The system utilizes closed loop control and is centered about oxygen sensing technology. An innovative approach to applying oxygen sensors to industrial engines provides very good performance, greatly prolongs sensor life, and maintains sensor accuracy. Design considerations and operating results are given for application of the system to stationary, industrial engines operating on fuel gases of greatly varying composition.

  5. Interactions between Energy Efficiency Programs funded under the Recovery Act and Utility Customer-Funded Energy Efficiency Programs

    SciTech Connect (OSTI)

    Goldman, Charles A.; Stuart, Elizabeth; Hoffman, Ian; Fuller, Merrian C.; Billingsley, Megan A.

    2011-02-25

    Since the spring of 2009, billions of federal dollars have been allocated to state and local governments as grants for energy efficiency and renewable energy projects and programs. The scale of this American Reinvestment and Recovery Act (ARRA) funding, focused on 'shovel-ready' projects to create and retain jobs, is unprecedented. Thousands of newly funded players - cities, counties, states, and tribes - and thousands of programs and projects are entering the existing landscape of energy efficiency programs for the first time or expanding their reach. The nation's experience base with energy efficiency is growing enormously, fed by federal dollars and driven by broader objectives than saving energy alone. State and local officials made countless choices in developing portfolios of ARRA-funded energy efficiency programs and deciding how their programs would relate to existing efficiency programs funded by utility customers. Those choices are worth examining as bellwethers of a future world where there may be multiple program administrators and funding sources in many states. What are the opportunities and challenges of this new environment? What short- and long-term impacts will this large, infusion of funds have on utility customer-funded programs; for example, on infrastructure for delivering energy efficiency services or on customer willingness to invest in energy efficiency? To what extent has the attribution of energy savings been a critical issue, especially where administrators of utility customer-funded energy efficiency programs have performance or shareholder incentives? Do the new ARRA-funded energy efficiency programs provide insights on roles or activities that are particularly well-suited to state and local program administrators vs. administrators or implementers of utility customer-funded programs? The answers could have important implications for the future of U.S. energy efficiency. This report focuses on a selected set of ARRA-funded energy efficiency programs administered by state energy offices: the State Energy Program (SEP) formula grants, the portion of Energy Efficiency and Conservation Block Grant (EECBG) formula funds administered directly by states, and the State Energy Efficient Appliance Rebate Program (SEEARP). Since these ARRA programs devote significant monies to energy efficiency and serve similar markets as utility customer-funded programs, there are frequent interactions between programs. We exclude the DOE low-income weatherization program and EECBG funding awarded directly to the over 2,200 cities, counties and tribes from our study to keep its scope manageable. We summarize the energy efficiency program design and funding choices made by the 50 state energy offices, 5 territories and the District of Columbia. We then focus on the specific choices made in 12 case study states. These states were selected based on the level of utility customer program funding, diversity of program administrator models, and geographic diversity. Based on interviews with more than 80 energy efficiency actors in those 12 states, we draw observations about states strategies for use of Recovery Act funds. We examine interactions between ARRA programs and utility customer-funded energy efficiency programs in terms of program planning, program design and implementation, policy issues, and potential long-term impacts. We consider how the existing regulatory policy framework and energy efficiency programs in these 12 states may have impacted development of these selected ARRA programs. Finally, we summarize key trends and highlight issues that evaluators of these ARRA programs may want to examine in more depth in their process and impact evaluations.

  6. Economic Potential of CHP in Detroit Edison Service Area: the Customer Perspective

    SciTech Connect (OSTI)

    Kelly, J.

    2003-10-10

    DOE's mission under the Distributed Energy and Electricity Reliability (DEER) Program is to strengthen America's electric energy infrastructure and provide utilities and consumers with a greater array of energy-efficient technology choices for generating, transmitting, distributing, storing, and managing demand for electric power and thermal energy. DOE recognizes that distributed energy technologies can help accomplish this mission. Distributed energy (DE) technologies have received much attention for the potential energy savings and electric power reliability assurances that may be achieved by their widespread adoption. Fueling the attention has been the desire to reduce greenhouse gas emissions and concern about easing power transmission and distribution system capacity limitations and congestion. However, these benefits may come at a cost to the electric utility companies in terms of lost revenue and other potential impacts on the distribution system. It is important to assess the costs and benefits of DE to consumers and distribution system companies. DOE commissioned this study to assess the costs and benefits of DE technologies to consumers and to better understand the effect of DE on the grid. Current central power generation units vent more waste heat (energy) than the entire transportation sector consumes and this wasted thermal energy is projected to grow by 45% within the next 20 years. Consumer investment in technologies that increase power generation efficiency is a key element of the DOE Energy Efficiency program. The program aims to increase overall cycle efficiency from 30% to 70% within 20 years as well. DOE wants to determine the impact of DE in several small areas within cities across the U.S. Ann Arbor, Michigan, was chosen as the city for this case study. Ann Arbor has electric and gas rates that can substantially affect the market penetration of DE. This case study analysis was intended to: (1) Determine what DE market penetration can realistically be expected, based on consumer investment in combined heat and power systems (CHP) and the effect of utility applied demand response (DR). (2) Evaluate and quantify the impact on the distribution utility feeder from the perspective of customer ownership of the DE equipment. (3) Determine the distribution feeder limits and the impact DE may have on future growth. For the case study, the Gas Technology Institute analyzed a single 16-megawatt grid feeder circuit in Ann Arbor, Michigan to determine whether there are economic incentives to use small distributed power generation systems that would offset the need to increase grid circuit capacity. Increasing circuit capacity would enable the circuit to meet consumer's energy demands at all times, but it would not improve the circuit's utilization factor. The analysis spans 12 years, to a planning horizon of 2015. By 2015, the demand for power is expected to exceed the grid circuit capacity for a significant portion of the year. The analysis was to determine whether economically acceptable implementation of customer-owned DE systems would reduce the peak power demands enough to forestall the need to upgrade the capacity of the grid circuit. The analysis was based on economics and gave no financial credit for improved power reliability or mitigation of environmental impacts. Before this study was completed, the utility expanded the capacity of the circuit to 22 MW. Although this expansion will enable the circuit to meet foreseeable increases in peak demand, it also will significantly decrease the circuit's overall utilization factor. The study revealed that DE penetration on the selected feeder is not expected to forestall the need to upgrade the grid circuit capacity unless interconnection barriers are removed. Currently, a variety of technical, business practice, and regulatory barriers discourage DE interconnection in the US market.

  7. SRS 2010 Vegetation Inventory GeoStatistical Mapping Results for Custom Reaction Intensity and Total Dead Fuels.

    SciTech Connect (OSTI)

    Edwards, Lloyd A. [Leading Solutions, LLC.; Paresol, Bernard [U.S. Department of Agriculture, Forest Service, Pacific Northwest Research Station, Portland, OR.

    2014-09-01

    This report of the geostatistical analysis results of the fire fuels response variables, custom reaction intensity and total dead fuels is but a part of an SRS 2010 vegetation inventory project. For detailed description of project, theory and background including sample design, methods, and results please refer to USDA Forest Service Savannah River Site internal report “SRS 2010 Vegetation Inventory GeoStatistical Mapping Report”, (Edwards & Parresol 2013).

  8. DOE Zero Energy Ready Home Case Study 2013: Weiss Building & Development, LLC., Custom Home, Downer Grove, IL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based| Department8, 2015 GATEWAY Takes 9.New Town Builders Denver,TCLLC Custom

  9. Integration of Nonlinear CDU Models in Refinery

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    Hydrotreatment Distillate blending Gas oil blending Cat Crack CDU Crude1, ... Crude2, .... butane Fuel gas Prem configuration: Process units Cases: Processing 2,3 & 4 crude oils Objective Select crude oils and quantities Model 2 Crude Oils Case 3 Crude Oils Case 4 Crude Oils Case FI 245 249 247 LP-SC 195 195 191 LP-FY 51 62

  10. Understanding Naphthenic Acid Corrosion in Refinery Settings

    E-Print Network [OSTI]

    Patrick, Brian Neil

    2015-01-01

    R. & Tordo, S. , 2005. Crude oil price differentials andfiles/08105.Technical Paper_Crude Oil Price DifferentialsAcids Present in Crude Oils Using Nanospray Fourier

  11. Retrofitting analysis of integrated bio-refineries 

    E-Print Network [OSTI]

    Cormier, Benjamin R.

    2007-04-25

    Industrial processes are currently facing many challenges. Market conditions are forcing changes in quantities and qualities of various products. With the qualitative and quantitative changes, production technologies and feedstocks must be re.... The different types of feedstock are shown in Table 2.1. Herbaceous and woody biomass are composed of carbohydrate polymers such as cellulose and hemicellulose, lignin and small parts of acids, salts and minerals. The cellulose and hemicellulose compose about...

  12. Monitoring and Management of Refinery Energy Consumption 

    E-Print Network [OSTI]

    Pelham, R. O.; Moriarty, R. D.; Hudgens, P. D.

    1986-01-01

    GASOLINE REFORMER FIGURE 4 14 ESL-IE-86-06-03 Proceedings from the Eighth Annual Industrial Energy Technology Conference, Houston, TX, June 17-19, 1986 REFORMER FEED QUALITY VS ENERGY FIG?URE 5 BASIS: CONSTANT SEVERITY AROMATICS CONSTANT NAP HTHF... is canbined with hydrogen, heated and passed over successive beds of catalyst. The complex reac tions are endothermic, requirirq heatirq prior to each reactor stage. Reactor inlet temperatures are 900 to 950?F and pressures rarqe from 150 to 400 psig...

  13. Application of Pinch Technology in Refinery Retrofits 

    E-Print Network [OSTI]

    Thomas, W. R.; Siegell, J. H.; Sideropoulos, T.; Robertson, J. L.; Papoulias, S. A.

    1987-01-01

    , the composite T-Q curves can be moved horizo tally unt i 1 the mi nimum temperature differen e is reached. Then the cold composite stream is is placed vertically up by half the miminum tem era ture difference, and the hot composite / str~a is displaced... Systems Synthesis", D.E.P. (July 1978), 70. 6. R.W.H. Sargent and I.E. Grossmann, Opti mum Design of Heat Exchanger Networks", Compo Chem. Eng. 1 (1978), 1. 7. B. Linnhoff and J.A. Turner, "Heat Re covery Networks: New Insights Yield Big Savings...

  14. Understanding Naphthenic Acid Corrosion in Refinery Settings

    E-Print Network [OSTI]

    Patrick, Brian Neil

    2015-01-01

    W.A. , 1991a. THE PALLADIUM-HYDROGEN. Annu. Rev. Mater.W.A. , 1991b. The Palladium-Hydrogen System. Annu. Rev.B.F.A. , 1982. The Palladium-Hydrogen System A SURVEY OF

  15. U.S. Refinery Net Production

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (BillionProved ReservesCubicper ThousandFeet)Decade Year-0 Year-1 Year-2Elements)12,813

  16. Indiana, Illinois and Kentucky Refinery Yield

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming963 1.969CentralWellsMillion CubicOctoberper Thousand CubicMay-15 Jun-15

  17. Myriant Succinic Acid BioRefinery

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURING OFFICESpecialAPPENDIX FOrigin of Contamination in Many

  18. U.S. Refinery Net Input

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With WIPP UPDATE: AprilCubicProduction Capacity ofCrude Oil2009 2010

  19. U.S. Refinery Net Production

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With WIPP UPDATE: AprilCubicProduction Capacity ofCrude Oil2009

  20. U.S. Refinery Utilization and Capacity

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With WIPP UPDATE: AprilCubicProduction Capacity ofCrudeStocks

  1. U.S. Refineries Competitive Positions

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming963 1.969 1.979Coal Consumers inYear Jan FebFeet)Year

  2. Refinery Outages: Fourth-Quarter 2015

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNaturalOctober 2015 Alcohol. TheData -1 Idle

  3. U.S. Fuel Consumed at Refineries

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices Global CrudeWhat's NewBarrels, Except Where Noted)

  4. U.S. Refinery Net Input

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices Global CrudeWhat'sMay-15 Jun-15 Jul-15 Aug-15May-15

  5. U.S. Refinery Net Production

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices Global CrudeWhat'sMay-15 Jun-15 Jul-15

  6. U.S. Refinery Utilization and Capacity

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices Global CrudeWhat'sMay-15 Jun-15 Jul-15Area: U.S.May-15

  7. See footnotes on back. NMSU PPO_500_01/01/14 NMSU DSU Customer Service: 1-866-369-NMSU (6678)

    E-Print Network [OSTI]

    Nishiguchi, Michele

    See footnotes on back. NMSU PPO_500_01/01/14 NMSU DSU Customer Service: 1-866-369-NMSU (6678) New and Basic Diagnostic Tests 25% 4 40% 4 * A Primary Preferred Provider is a physician or other professional

  8. EXAMINING THE EFFECTS OF A HEALTHY RESTAURANT INTERVENTION ON CUSTOMERS' PURCHASES OF HEALTHIER FOOD OPTIONS IN LATINO FAMILY-OWNED RESTAURANTS

    E-Print Network [OSTI]

    Pandya, Shital Pratik

    2013-08-31

    This study examined the effects of a Healthy Restaurant Intervention on customers' purchases of healthier food options in Latino family-owned restaurants. As part of the context for this study, the Nutrition Committee of the Latino Health for All...

  9. Using Custom CarryMap Apps with Android Mobile Devices Part of the Small Entity Compliance Guide for Fishery Restriction Areas

    E-Print Network [OSTI]

    Using Custom CarryMap Apps with Android Mobile Devices Part of the Small Entity Compliance Guide adapted from http://www.dataeast.com/en/pdf/CarryMap%20Observer%20functionality_Android_en.pdf The fishery

  10. Development of custom fire behavior fuel models from FCCS fuelbeds for the Savannah River fuel assessment project.

    SciTech Connect (OSTI)

    Scott, Joe, H.

    2009-07-23

    The purpose of this project is to create fire behavior fuel models that replicate the fire behavior characteristics (spread rate and fireline intensity) produced by 23 candidate FCCS fuelbeds developed for the Savannah River National Wildlife Refuge. These 23 fuelbeds were created by FERA staff in consultation with local fuel managers. The FCCS produces simulations of surface fire spread rate and flame length (and therefore fireline intensity) for each of these fuelbeds, but it does not produce maps of those fire behavior characteristics or simulate fire growth—those tasks currently require the use of the FARSITE and/or FlamMap software systems. FARSITE and FlamMap do not directly use FCCS fuelbeds, but instead use standard or custom fire behavior fuel models to describe surface fuel characteristics for fire modeling. Therefore, replicating fire growth and fire behavior potential calculations using FCCS?simulated fire characteristics requires the development of custom fuel models that mimic, as closely as possible, the fire behavior characteristics produced by the FCCS for each fuelbed, over a range of fuel moisture and wind speeds.

  11. Regulation, customer protection and customer engagement

    E-Print Network [OSTI]

    Littlechild, Stephen

    It was particularly concerned about significant increases in BAA’s capex programme during its inquiry, about information and resource asymmetries, and the absence of a dispute resolution or arbitration procedure at each stage. Nevertheless, the Commission saw...

  12. FCC Pilot Plant Results with Vegetable Oil and Pyrolysis Oil Feeds

    Office of Energy Efficiency and Renewable Energy (EERE)

    Breakout Session 2: Frontiers and Horizons Session 2–D: Working Together: Conventional Refineries and Bio-Oil R&D Technologies E. Thomas (Tom) Habib, Jr., Director, Customer Research Partnerships, W.R. Grace & Co.

  13. Developing custom fire behavior fuel models from ecologically complex fuel structures for upper Atlantic Coastal Plain forests.

    SciTech Connect (OSTI)

    Parresol, Bernard, R.; Scott, Joe, H.; Andreu, Anne; Prichard, Susan; Kurth, Laurie

    2012-01-01

    Currently geospatial fire behavior analyses are performed with an array of fire behavior modeling systems such as FARSITE, FlamMap, and the Large Fire Simulation System. These systems currently require standard or customized surface fire behavior fuel models as inputs that are often assigned through remote sensing information. The ability to handle hundreds or thousands of measured surface fuelbeds representing the fine scale variation in fire behavior on the landscape is constrained in terms of creating compatible custom fire behavior fuel models. In this study, we demonstrate an objective method for taking ecologically complex fuelbeds from inventory observations and converting those into a set of custom fuel models that can be mapped to the original landscape. We use an original set of 629 fuel inventory plots measured on an 80,000 ha contiguous landscape in the upper Atlantic Coastal Plain of the southeastern United States. From models linking stand conditions to component fuel loads, we impute fuelbeds for over 6000 stands. These imputed fuelbeds were then converted to fire behavior parameters under extreme fuel moisture and wind conditions (97th percentile) using the fuel characteristic classification system (FCCS) to estimate surface fire rate of spread, surface fire flame length, shrub layer reaction intensity (heat load), non-woody layer reaction intensity, woody layer reaction intensity, and litter-lichen-moss layer reaction intensity. We performed hierarchical cluster analysis of the stands based on the values of the fire behavior parameters. The resulting 7 clusters were the basis for the development of 7 custom fire behavior fuel models from the cluster centroids that were calibrated against the FCCS point data for wind and fuel moisture. The latter process resulted in calibration against flame length as it was difficult to obtain a simultaneous calibration against both rate of spread and flame length. The clusters based on FCCS fire behavior parameters represent reasonably identifiable stand conditions, being: (1) pine dominated stands with more litter and down woody debriscomponents than other stands, (2) hardwood and pine stands with no shrubs, (3) hardwood dominated stands with low shrub and high non-woody biomass and high down woody debris, (4) stands with high grass and forb (i.e., non-woody) biomass as well as substantial shrub biomass, (5) stands with both high shrub and litter biomass, (6) pine-mixed hardwood stands with moderate litter biomass and low shrub biomass, and (7) baldcypress-tupelo stands. Models representing these stand clusters generated flame lengths from 0.6 to 2.3 musing a 30 km h{sub 1} wind speed and fireline intensities of 100-1500 kW m{sub 1} that are typical within the range of experience on this landscape. The fuel models ranked 1 < 2 < 7 < 5 < 4 < 3 < 6 in terms of both flame length and fireline intensity. The method allows for ecologically complex data to be utilized in order to create a landscape representative of measured fuel conditions and to create models that interface with geospatial fire models.

  14. Automated Price and Demand Response Demonstration for Large Customers in New York City using OpenADR

    SciTech Connect (OSTI)

    Kim, Joyce Jihyun; Yin, Rongxin; Kiliccote, Sila

    2013-10-01

    Open Automated Demand Response (OpenADR), an XML-based information exchange model, is used to facilitate continuous price-responsive operation and demand response participation for large commercial buildings in New York who are subject to the default day-ahead hourly pricing. We summarize the existing demand response programs in New York and discuss OpenADR communication, prioritization of demand response signals, and control methods. Building energy simulation models are developed and field tests are conducted to evaluate continuous energy management and demand response capabilities of two commercial buildings in New York City. Preliminary results reveal that providing machine-readable prices to commercial buildings can facilitate both demand response participation and continuous energy cost savings. Hence, efforts should be made to develop more sophisticated algorithms for building control systems to minimize customer's utility bill based on price and reliability information from the electricity grid.

  15. Outlook for Refinery Outages and Available Refinery Capacity in the First Half of 2014

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)Decade Year-0 Year-1 Year-2 Year-3+Elements) Gas and(Billion

  16. USING COMPUTER VISION TO GENERATE CUSTOMIZED SPATIAL AUDIO Ankur Mohan, Ramani Duraiswami, Dmitry N. Zotkin, Daniel DeMenthon, Larry S. Davis

    E-Print Network [OSTI]

    DeMenthon, Daniel

    are used for HRTF customiza- tion. For low-frequency HRTF customization we employ a simple head virtual spatial audio over headphones re- quires real-time head tracking, personalized head to address these issues based on costly head trackers, measured personalized HRTFs and room responses

  17. See footnotes on back. NMSU PPO_500_01/01/13 NMSU DSU Customer Service: 1-866-369-NMSU (6678)

    E-Print Network [OSTI]

    Nishiguchi, Michele

    See footnotes on back. NMSU PPO_500_01/01/13 NMSU DSU Customer Service: 1-866-369-NMSU (6678) New 40% 4 Lab, X-Ray, MRI, CT Scan, PET Scan and Basic Diagnostic Tests 25% 4 40% 4 * A Primary Preferred

  18. Following up on a work order The main screen of the customer portal lists all work orders you've submitted, with most recent

    E-Print Network [OSTI]

    California at San Diego, University of

    1 Following up on a work order The main screen of the customer portal lists all work orders you: On the main screen, find your work order and look under the "Status" column. 2. Send a message about a work order: On the main page, right-click the appropriate work order, and select "New Communication" from

  19. Preprint of: H. Berghel, D. Berleant, T. Foy*, and M. McGuire*, "Cyberbrowsing: information customization on the Web," Journal of the American Society for Information Science (JASIS) 50

    E-Print Network [OSTI]

    Berleant, Daniel

    customization on the Web," Journal of the American Society for Information Science (JASIS) 50 (10) (May, 1999Preprint of: H. Berghel, D. Berleant, T. Foy*, and M. McGuire*, "Cyberbrowsing: information), pp. 505-511. Cyberbrowsing: Information Customization on the Web Hal Berghel*, Daniel Berleant

  20. An SoC (system on a chip) integrates a processor, memory modules, I/O periph-erals, and custom hardware accelerators into a single integrated circuit. As the

    E-Print Network [OSTI]

    Chu, Pong P.

    , and custom hardware accelerators into a single integrated circuit. As the capacity of FPGA (field and is sometimes known as SoPC (system on a programmable chip). In a traditional embedded system, the hardware of the programmability of FPGA devices, customized hardware can be incorporated into the embedded sys- tem as well. We