National Library of Energy BETA

Sample records for non-federal sponsors process

  1. Reimbursable Work For Non-Federal Sponsors Process Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-01-03

    This Manual provides detailed requirements to supplement DOE O 481.1A, Work for Others (Non-DOE Funded Work), dated 01-03-01, which establishes requirements for the performance of work for non-Department of Energy (DOE) National Nuclear Security Administration (NNSA) entities by DOE/NNSA/contractor personnel and/or the use of DOE facilities that is not directly funded by DOE/NNSA appropriations. (Cancels DOE M 481.1-1).

  2. Reimbursable Work for Non-Federal Sponsors Process Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-01-03

    This Manual provides detailed requirements to supplement DOE O 481.1B, Work For Others (Non-Department of Energy Funded Work), dated 9-28-01, which establishes requirements for the performance of work for non-Department of Energy (DOE)/non-National Nuclear Security Administration (NNSA) entities by DOE/NNSA/contractor personnel and/or the use of DOE/NNSA facilities that is not directly funded by DOE/NNSA appropriations. Chg 1, dated 9-28-01, supersedes DOE M 481.1-1. Certified 12-28-06.

  3. Reimbursable Work for Non-Federal Sponsors Process Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-09-30

    This Manual provides detailed requirements to supplement DOE O 481.1. Does not cancel other directives.

  4. PROJECT NAME: SAN DIEGO DAM (TX.07314) 1. Provide the name of all non-Federal interests planning to act as the sponsor, including

    E-Print Network [OSTI]

    US Army Corps of Engineers

    PROJECT NAME: SAN DIEGO DAM (TX.07314) 1. Provide the name of all non-Federal interests planning for the feasibility study is to detennine the need to update/upgrade the dam in order to assist in our effmis), which allows for flood insurance discounts to local residents. #12;Image 1: Dam location and affected

  5. PROJECT NAME: OHIO ST. RESERVOIR DAM (TX.09511) 1. Provide the name of all non-Federal interests planning to act as the sponsor, including

    E-Print Network [OSTI]

    US Army Corps of Engineers

    PROJECT NAME: OHIO ST. RESERVOIR DAM (TX.09511) 1. Provide the name of all non-Federal interests for the feasibility study is to determine the need to update/upgrade the dam in order to assist in our efforts), which allows for flood insurance discounts to local residents. #12;Image 1: Dam location and affected

  6. PROJECT NAME: NEB Range Dam System 1. Provide the name of all non-Federal interests planning to act as the sponsor, including

    E-Print Network [OSTI]

    US Army Corps of Engineers

    PROJECT NAME: NEB Range Dam System 1. Provide the name of all non-Federal interests planning to act for the feasibility study is to determine the need to update/upgrade the dam in order to assist in our efforts), which allows for flood insurance discounts to local residents. #12;Image 1: Dam location and affected

  7. Sponsors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SciClips Video Contest Sponsors Volunteers - Resources About Science Bowl Curriculum and Activities How to Build a Motor The Great Marble Drop How to Build a Turbine How...

  8. Oil shale, tar sand, coal research advanced exploratory process technology, jointly sponsored research

    SciTech Connect (OSTI)

    Speight, J.G.

    1992-01-01

    Accomplishments for the past quarter are presented for the following five tasks: oil shale; tar sand; coal; advanced exploratory process technology; and jointly sponsored research. Oil shale research covers oil shale process studies. Tar sand research is on process development of Recycle Oil Pyrolysis and Extraction (ROPE) Process. Coal research covers: coal combustion; integrated coal processing concepts; and solid waste management. Advanced exploratory process technology includes: advanced process concepts;advanced mitigation concepts; and oil and gas technology. Jointly sponsored research includes: organic and inorganic hazardous waste stabilization; CROW field demonstration with Bell Lumber and Pole; development and validation of a standard test method for sequential batch extraction fluid; PGI demonstration project; operation and evaluation of the CO[sub 2] HUFF-N-PUFF Process; fly ash binder for unsurfaced road aggregates; solid state NMR analysis of Mesaverde Group, Greater Green River Basin, tight gas sands; flow-loop testing of double-wall pipe for thermal applications; characterization of petroleum residue; shallow oil production using horizontal wells with enhanced oil recovery techniques; surface process study for oil recovery using a thermal extraction process; NMR analysis of samples from the ocean drilling program; in situ treatment of manufactured gas plant contaminated soils demonstration program; and solid state NMR analysis of naturally and artificially matured kerogens.

  9. Oil shale, tar sand, coal research, advanced exploratory process technology, jointly sponsored research

    SciTech Connect (OSTI)

    Not Available

    1992-01-01

    Progress made in five research programs is described. The subtasks in oil shale study include oil shale process studies and unconventional applications and markets for western oil shale.The tar sand study is on recycle oil pyrolysis and extraction (ROPE) process. Four tasks are described in coal research: underground coal gasification; coal combustion; integrated coal processing concepts; and sold waste management. Advanced exploratory process technology includes: advanced process concepts; advanced mitigation concepts; and oil and gas technology. Jointly sponsored research covers: organic and inorganic hazardous waste stabilization; CROW field demonstration with Bell Lumber and Pole; development and validation of a standard test method for sequential batch extraction fluid; PGI demonstration project; operation and evaluation of the CO[sub 2] HUFF-N-PUFF process; fly ash binder for unsurfaced road aggregates; solid state NMR analysis of Mesaverde group, Greater Green River Basin, tight gas sands; flow-loop testing of double-wall pipe for thermal applications; shallow oil production using horizontal wells with enhanced oil recovery techniques; NMR analysis of sample from the ocean drilling program; and menu driven access to the WDEQ hydrologic data management system.

  10. Fellowship Office Processing Requirements Copy of the Program Announcement or sponsor instructions

    E-Print Network [OSTI]

    Kay, Mark A.

    FL Conflict of Interest Supplemental Form New Award Activation Verification of Appointment & PeopleSoft entry Verification of Visa Status Sponsor Award Notice (including terms and conditions) Approval Cost Extension Written request made directly to sponsor by Faculty Mentor and Postdoctoral Scholar

  11. Non-Federal Participation in AC Intertie : Final Environmental Impact Statement. Volume 1: Environmental Analysis.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    1994-01-01

    Bonneville Power Administration (BPA) is considering action in two areas: (1) non-Federal access to the AC Intertie, and, (2) BPA Intertie marketing. BPA`s preferred alternative for non-Federal access is the Capacity Ownership alternative combined with the Increased Assured Delivery -- Access for Non-Scheduling Utilities alternative; the preferred alternative for BPA Intertie marketing is the Federal Marketing and Joint Ventures alternative. BPA considered these two areas previously in its Intertie Development and Use EIS of April 1988. The EIS resulted in BPA decisions to participate in the construction of the Third AC Intertie, to allow non-Federal access to BPA`s share of the Pacific Northwest-Pacific Southwest (PNW-PSW) Intertie (AC and DC lines) pursuant to a Long-Term Intertie Access Policy (LTIAP), and to pursue BPA`s export marketing alternative. The decision on allowing direct financial non-Federal participation in the Third AC line was deferred to a later, separate process, examined here. Also, BPA`s export marketing objectives must now be examined in view of changed operations of Columbia River hydro facilities for improved fish survival.

  12. Sponsored Programs SPONSORED PROGRAMS MANUAL

    E-Print Network [OSTI]

    Fernandez, Eduardo

    the faculty member's base salary rate. Salary above and beyond the faculty member's base salary rate agency. Summer salary paid to faculty on academic year, or nine-month contracts is not considered extra: Sponsored Programs requires that all proposals whose budgets include funds to pay for salary in excess of 1

  13. Oil shale, tar sand, coal research advanced exploratory process technology, jointly sponsored research. Quarterly technical progress report, October--December 1992

    SciTech Connect (OSTI)

    Speight, J.G.

    1992-12-31

    Accomplishments for the past quarter are presented for the following five tasks: oil shale; tar sand; coal; advanced exploratory process technology; and jointly sponsored research. Oil shale research covers oil shale process studies. Tar sand research is on process development of Recycle Oil Pyrolysis and Extraction (ROPE) Process. Coal research covers: coal combustion; integrated coal processing concepts; and solid waste management. Advanced exploratory process technology includes: advanced process concepts;advanced mitigation concepts; and oil and gas technology. Jointly sponsored research includes: organic and inorganic hazardous waste stabilization; CROW field demonstration with Bell Lumber and Pole; development and validation of a standard test method for sequential batch extraction fluid; PGI demonstration project; operation and evaluation of the CO{sub 2} HUFF-N-PUFF Process; fly ash binder for unsurfaced road aggregates; solid state NMR analysis of Mesaverde Group, Greater Green River Basin, tight gas sands; flow-loop testing of double-wall pipe for thermal applications; characterization of petroleum residue; shallow oil production using horizontal wells with enhanced oil recovery techniques; surface process study for oil recovery using a thermal extraction process; NMR analysis of samples from the ocean drilling program; in situ treatment of manufactured gas plant contaminated soils demonstration program; and solid state NMR analysis of naturally and artificially matured kerogens.

  14. Oil shale, tar sand, coal research, advanced exploratory process technology, jointly sponsored research. Quarterly technical progress report, July--September 1992

    SciTech Connect (OSTI)

    Not Available

    1992-12-31

    Progress made in five research programs is described. The subtasks in oil shale study include oil shale process studies and unconventional applications and markets for western oil shale.The tar sand study is on recycle oil pyrolysis and extraction (ROPE) process. Four tasks are described in coal research: underground coal gasification; coal combustion; integrated coal processing concepts; and sold waste management. Advanced exploratory process technology includes: advanced process concepts; advanced mitigation concepts; and oil and gas technology. Jointly sponsored research covers: organic and inorganic hazardous waste stabilization; CROW field demonstration with Bell Lumber and Pole; development and validation of a standard test method for sequential batch extraction fluid; PGI demonstration project; operation and evaluation of the CO{sub 2} HUFF-N-PUFF process; fly ash binder for unsurfaced road aggregates; solid state NMR analysis of Mesaverde group, Greater Green River Basin, tight gas sands; flow-loop testing of double-wall pipe for thermal applications; shallow oil production using horizontal wells with enhanced oil recovery techniques; NMR analysis of sample from the ocean drilling program; and menu driven access to the WDEQ hydrologic data management system.

  15. Sponsors | Robotics Internship Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effect Photovoltaics -7541C.3 SpecialSponsor Guidelines Candidates f or t heSponsors

  16. Non-Federal Interest: The sponsor for regional coordination is the Upper Mississippi, Illinois & Missouri Rivers Association (UMIMRA). Federal implementation planning for responsible Federal and non-Federal entities will be by the

    E-Print Network [OSTI]

    US Army Corps of Engineers

    submit to the Committee on Transportation and Infrastructure of the House of Representatives, implementing an elevated pump station authority under PL 84-99, and enacting an upland passive storage funding

  17. Virginia Commonwealth University Office of Sponsored Programs

    E-Print Network [OSTI]

    Hammack, Richard

    -Share Authorization, line item budget as well all sponsor-required documentation Master Agreement ­ Include completed Agreement (CDA), Non-Disclosure Agreement Request for Supplemental Funds ­ Include completed and signed IAF and justification Agreement for Negotiation/Processing ­ Include agreement documents to be reviewed POST

  18. Point No Point Marsh Restoration and Flood Risk Mitigation Feasibility Project 1. Provide the name of all non-Federal interests planning to act as the sponsor,

    E-Print Network [OSTI]

    US Army Corps of Engineers

    Point No Point Marsh Restoration and Flood Risk Mitigation Feasibility Project 1. Provide the name. This proposal is for a feasibility study for environmental restoration and flood risk mitigation. 3. State Restoration and Flood Risk Mitigation Feasibility Project are: Determine alternative approaches

  19. PROJECT NAME: MEMPHIS AVE. DAM (EPWU Dam #4-TX07017) 1. Provide the name of all non-Federal interests planning to act as the sponsor, including

    E-Print Network [OSTI]

    US Army Corps of Engineers

    PROJECT NAME: MEMPHIS AVE. DAM (EPWU Dam #4-TX07017) 1. Provide the name of all non. The purpose for the feasibility study is to determine the need to update/upgrade the dam in order to assist (NFIP), which allows for flood insurance discounts to local residents. #12;Image 1: Dam location

  20. PROJECT NAME: SCENIC DRIVE DAM (EPWUDam #6-TX07019) 1. Provide the name of all non-Federal interests planning to act as the sponsor, including

    E-Print Network [OSTI]

    US Army Corps of Engineers

    PROJECT NAME: SCENIC DRIVE DAM (EPWUDam #6-TX07019) 1. Provide the name of all non. The purpose for the feasibility study is to determine the need to update/upgrade the dam in order to assist (NFIP), which allows for flood insurance discounts to local residents. #12;Image 1: Dam location

  1. PROJECT NAME: NASHVILLE AVE. DAM (EPWU Dam #3-1. Provide the name of all non-Federal interests planning to act as the sponsor, including

    E-Print Network [OSTI]

    US Army Corps of Engineers

    PROJECT NAME: NASHVILLE AVE. DAM (EPWU Dam #3- TX07016) 1. Provide the name of all non. The purpose for the feasibility study is to determine the need to update/upgrade the dam in order to assist;Image 1: Dam location and affected community areas l.egend lmoiReiJii

  2. PROJECT NAME: MOREHEAD AVE. DAM (EPWU Dam #2-TX07015) 1. Provide the name of all non-Federal interests planning to act as the sponsor, including

    E-Print Network [OSTI]

    US Army Corps of Engineers

    PROJECT NAME: MOREHEAD AVE. DAM (EPWU Dam #2- TX07015) 1. Provide the name of all non. The purpose for the feasibility study is to determine the need to update/upgrade the dam in order to assist (NFIP), which allows for flood insurance discounts to local residents. #12;Image 1: Dam location

  3. PROJECT NAME: CLIFF ST. DAM (EPWU Dam #10-TX07023) 1. Provide the name of all non-Federal interests planning to act as the sponsor, including

    E-Print Network [OSTI]

    US Army Corps of Engineers

    PROJECT NAME: CLIFF ST. DAM (EPWU Dam #10- TX07023) 1. Provide the name of all non. The purpose for the feasibility study is to determine the need to update/upgrade the dam in order to assist (NFIP), which allows for flood insurance discounts to local residents. #12;Image 1: Dam location

  4. PROJECT NAME: TREMONT AVE. DAM (EPWUDam #7-TX07020) 1. Provide the name of all non-Federal interests planning to act as the sponsor, including

    E-Print Network [OSTI]

    US Army Corps of Engineers

    PROJECT NAME: TREMONT AVE. DAM (EPWUDam #7- TX07020) 1. Provide the name of all non. The purpose for the feasibility study is to determine the need to update/upgrade the dam in order to assist (NFIP), which allows for flood insurance discounts to local residents. #12;Image 1: Dam location

  5. PROJECT NAME: MURCHISON AVE. DAM (EPWUDam #8--TX07021) 1. Provide the name of all non-Federal interests planning to act as the sponsor, including

    E-Print Network [OSTI]

    US Army Corps of Engineers

    PROJECT NAME: MURCHISON AVE. DAM (EPWUDam #8--TX07021) 1. Provide the name of all non. The purpose for the feasibility study is to determine the need to update/upgrade the dam in order to assist (NFIP), which allows for flood insurance discounts to local residents. #12;Image 1: Dam location

  6. Jointly Sponsored Research Program

    SciTech Connect (OSTI)

    Everett A. Sondreal; John G. Hendrikson; Thomas A. Erickson

    2009-03-31

    U.S. Department of Energy (DOE) Cooperative Agreement DE-FC26-98FT40321 funded through the Office of Fossil Energy and administered at the National Energy Technology Laboratory (NETL) supported the performance of a Jointly Sponsored Research Program (JSRP) at the Energy & Environmental Research Center (EERC) with a minimum 50% nonfederal cost share to assist industry in commercializing and effectively applying highly efficient, nonpolluting energy systems that meet the nation's requirements for clean fuels, chemicals, and electricity in the 21st century. The EERC in partnership with its nonfederal partners jointly performed 131 JSRP projects for which the total DOE cost share was $22,716,634 (38%) and the nonfederal share was $36,776,573 (62%). Summaries of these projects are presented in this report for six program areas: (1) resource characterization and waste management, (2) air quality assessment and control, (3) advanced power systems, (4) advanced fuel forms, (5) value-added coproducts, and (6) advanced materials. The work performed under this agreement addressed DOE goals for reductions in CO{sub 2} emissions through efficiency, capture, and sequestration; near-zero emissions from highly efficient coal-fired power plants; environmental control capabilities for SO{sub 2}, NO{sub x}, fine respirable particulate (PM{sub 2.5}), and mercury; alternative transportation fuels including liquid synfuels and hydrogen; and synergistic integration of fossil and renewable resources.

  7. Lower Colorado River Authority RE: Response to Proposal From Non-Federal Interests for Proposed Feasibility Studies and

    E-Print Network [OSTI]

    US Army Corps of Engineers

    run-off. However the Eastern Arm is freshened almost exclusively by the Colorado River. Texas ParksLower Colorado River Authority Page | 1 RE: Response to Proposal From Non-Federal Interests-Federal Interest: Lower Colorado River Authority, P.O. Box 220, Austin, TX, 78767- 0220. Attention John Hofmann

  8. This work was sponsored by Intel Corporation through the Colorado Power Electronics Center.

    E-Print Network [OSTI]

    This work was sponsored by Intel Corporation through the Colorado Power Electronics Center Process Tony Carosa, Regan Zane and Dragan Maksimovic Colorado Power Electronics Center Department

  9. Research investigations in oil shale, tar sand, coal research, advanced exploratory process technology, and advanced fuels research: Volume 2 -- Jointly sponsored research program. Final report, October 1986--September 1993

    SciTech Connect (OSTI)

    Smith, V.E.

    1994-09-01

    Numerous studies have been conducted in five principal areas: oil shale, tar sand, underground coal gasification, advanced process technology, and advanced fuels research. In subsequent years, underground coal gasification was broadened to be coal research, under which several research activities were conducted that related to coal processing. The most significant change occurred in 1989 when the agreement was redefined as a Base Program and a Jointly Sponsored Research Program (JSRP). Investigations were conducted under the Base Program to determine the physical and chemical properties of materials suitable for conversion to liquid and gaseous fuels, to test and evaluate processes and innovative concepts for such conversions, to monitor and determine environmental impacts related to development of commercial-sized operations, and to evaluate methods for mitigation of potential environmental impacts. This report is divided into two volumes: Volume 1 consists of 28 summaries that describe the principal research efforts conducted under the Base Program in five topic areas. Volume 2 describes tasks performed within the JSRP. Research conducted under this agreement has resulted in technology transfer of a variety of energy-related research information. A listing of related publications and presentations is given at the end of each research topic summary. More specific and detailed information is provided in the topical reports referenced in the related publications listings.

  10. Application for a Sponsored Account

    E-Print Network [OSTI]

    of the networked information resources have educational institution license restrictions imposed on them which's license, or other government provided identification card. In addition, they need to verify the volunteer is for sponsored research, the account may be set up for the length of the award. It is the responsibility

  11. Sponsored Research Executive Summary 1 Funding History by Sponsor Type FY95 -FY04

    E-Print Network [OSTI]

    Kroll, Kristen L.

    #12;Sponsored Research Executive Summary 1 Funding History by Sponsor Type ­ FY95 - FY04 Figure 1 ­ Funding History by Sponsor Type 2 Table 1 ­ Funding History by Sponsor Type 2 Figure 2 ­ Federal Funding 3 vs. F & A Costs ­ FY04 & FY03 Award Dollars by Project Type ­ FY04 & FY03 Table 4 ­ Award Dollars

  12. Sponsored Research | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation ofAlbuquerque|SensitiveApril 2, 2014Application Instructions Sponsor

  13. ORISE: Research Participation Programs by Sponsor

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ORISE Science Education Programs by Sponsor ORISE research participation programs provide students and faculty with experience at top government laboratories Through its contract...

  14. Visa Applicant Deemed Export Questionnaire for Sponsored & Non-Sponsored Activities

    E-Print Network [OSTI]

    Fernandez, Eduardo

    Visa Applicant Deemed Export Questionnaire for Sponsored & Non-Sponsored Activities Instructions. Are these sponsored research projects export controlled or subject to access, publication, participation the FAU visa signatory for foreign nationals to perform a "deemed export attestation" and under certain

  15. Jointly Sponsored Research Program Energy Related Research

    SciTech Connect (OSTI)

    Western Research Institute

    2009-03-31

    Cooperative Agreement, DE-FC26-98FT40323, Jointly Sponsored Research (JSR) Program at Western Research Institute (WRI) began in 1998. Over the course of the Program, a total of seventy-seven tasks were proposed utilizing a total of $23,202,579 in USDOE funds. Against this funding, cosponsors committed $26,557,649 in private funds to produce a program valued at $49,760,228. The goal of the Jointly Sponsored Research Program was to develop or assist in the development of innovative technology solutions that will: (1) Increase the production of United States energy resources - coal, natural gas, oil, and renewable energy resources; (2) Enhance the competitiveness of United States energy technologies in international markets and assist in technology transfer; (3) Reduce the nation's dependence on foreign energy supplies and strengthen both the United States and regional economies; and (4) Minimize environmental impacts of energy production and utilization. Under the JSR Program, energy-related tasks emphasized enhanced oil recovery, heavy oil upgrading and characterization, coal beneficiation and upgrading, coal combustion systems development including oxy-combustion, emissions monitoring and abatement, coal gasification technologies including gas clean-up and conditioning, hydrogen and liquid fuels production, coal-bed methane recovery, and the development of technologies for the utilization of renewable energy resources. Environmental-related activities emphasized cleaning contaminated soils and waters, processing of oily wastes, mitigating acid mine drainage, and demonstrating uses for solid waste from clean coal technologies, and other advanced coal-based systems. Technology enhancement activities included resource characterization studies, development of improved methods, monitors and sensors. In general the goals of the tasks proposed were to enhance competitiveness of U.S. technology, increase production of domestic resources, and reduce environmental impacts associated with energy production and utilization. This report summarizes the accomplishments of the JSR Program.

  16. A Sponsored Supplement to Science The Chinese

    E-Print Network [OSTI]

    Napp, Nils

    A Sponsored Supplement to Science The Chinese Research Paradigm: Addressing Global Science Issues Sponsored by Produced by the Science/AAAS Custom Publishing Office #12;The Chinese Research Paradigm] in The Chinese Research Paradigm: Addressing Global Science Issues (Science/AAAS, Washington, DC, 2014), p. [xx

  17. Sponsored by Nanotechnology Seminar Program Electronics on Anything: How Thin Film

    E-Print Network [OSTI]

    Fisher, Frank

    including electronically active and flexible materials. Our group has been working on the hybrid integrationSponsored by Nanotechnology Seminar Program Electronics on Anything: How Thin Film Electronics University ABSTRACT: Silicon electronics have revolutionized the processing and handling of information

  18. 6C72.027 Sponsored Research. (1) Definition of Sponsored Research Sponsored Research is research, as defined in paragraph (2)(a)

    E-Print Network [OSTI]

    Wu, Shin-Tson

    6C72.027 Sponsored Research. (1) Definition of Sponsored Research ­ Sponsored Research is research, as defined in paragraph (2)(a) below, executed by university employees using any university and encourage sponsored research activity by its faculty members. Such activity is desirable for the following

  19. Training is sponsoring Excel Intermediate & Advanced Courses...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Due to a tremendous response, Training is sponsoring additional Excel Intermediate & Advanced Courses. The classes will be held on Wednesday and Thursday, May 20-21, 8 a.m.-5 p.m....

  20. Office of Sponsored Research Services Office of Sponsored

    E-Print Network [OSTI]

    Kroll, Kristen L.

    Anatomy Radiology Radiation Oncology Physical Therapy Ophthalmology Cell Biology Pathology & Immunology process for recipients of federal funds. DUNS number acquisition takes about 15 minutes on the phone

  1. UCF-2.027 Sponsored Research. (1) Definition of Sponsored Research Sponsored Research is research, as defined in paragraph (2)(a)

    E-Print Network [OSTI]

    Wu, Shin-Tson

    UCF-2.027 Sponsored Research. (1) Definition of Sponsored Research ­ Sponsored Research is research research activity by its faculty members. Such activity is desirable for the following reasons: (a) One of the principal objectives of the University is to encourage and support research (broadly interpreted as all

  2. Sponsored by Air Force Research Laboratory

    E-Print Network [OSTI]

    Salvaggio, Carl

    Sponsored by Air Force Research Laboratory Space Vehicles Directorate Directed Energy Directorate to partner with AFRL scientists and engineers on current research projects that are often the basis Phillips Scholars Phillips Scholars directed Energy Scholars directed Energy Scholars Air Force Research

  3. CUNY EXPORT CONTROL PROCEDURES 13. Sponsored Research

    E-Print Network [OSTI]

    Rosen, Jay

    CUNY EXPORT CONTROL PROCEDURES 13. Sponsored Research This Section addresses the export control or contract contains or triggers export control restrictions. In general, CUNY does not accept restrictions with regard to export controls or the control implication of a particular clause or set of clauses may

  4. Version April 2011 SPONSORED RESEARCH AGREEMENT

    E-Print Network [OSTI]

    He, Chuan

    payable to The University of Chicago and directed to: Sponsored Award Accounting Financial Services, worldwide, royalty-bearing license (including the right to sublicense) to make, have made, use and sell in good faith for a period of no more than ninety (90) days to enter a mutually satisfactory license

  5. 2009 Spring Tuesday Seminar Series Sponsored by UPGG and IGSP

    E-Print Network [OSTI]

    Richardson, David

    2009 Spring Tuesday Seminar Series Sponsored by UPGG and IGSP 12:30pm ­ Room 147 Nanaline Duke 01: Ashley Chi) #12;2009 Spring Tuesday Seminar Series (cont.) Sponsored by UPGG and IGSP 12:30pm ­ Room 147

  6. Collegiate Wind Competition Sponsors | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center HomeVehicle ReplacementStatesAInitiativeSponsors Collegiate Wind

  7. DOE-EERC jointly sponsored research program

    SciTech Connect (OSTI)

    Hendrikson, J.G.; Sondreal, E.A.

    1999-09-01

    U.S. Department of Energy (DOE) Cooperative Agreement DE-FC21-93MC30098 funded through the Office of Fossil Energy and administered at the Federal Energy Technology Center (FETC) supported the performance of a Jointly Sponsored Research Program (JSRP) at the Energy and Environmental Research Center (EERC) with a minimum 50% nonfederal cost share to assist industry in commercializing and effectively applying efficient, nonpolluting energy technologies that can compete effectively in meeting market demands for clean fuels, chemical feedstocks, and electricity in the 21st century. The objective of the JSRP was to advance the deployment of advanced technologies for improving energy efficiency and environmental performance through jointly sponsored research on topics that would not be adequately addressed by the private sector alone. Examples of such topics include the barriers to hot-gas cleaning impeding the deployment of high-efficiency power systems and the search for practical means for sequestering CO{sub 2} generated by fossil fuel combustion. The selection of particular research projects was guided by a combination of DOE priorities and market needs, as provided by the requirement for joint venture funding approved both by DOE and the private sector sponsor. The research addressed many different energy resource and related environmental problems, with emphasis directed toward the EERC's historic lead mission in low-rank coals (LRCs), which represent approximately half of the U.S. coal resources in the conterminous states, much larger potential resources in Alaska, and a major part of the energy base in the former U.S.S.R., East Central Europe, and the Pacific Rim. The Base and JSRP agreements were tailored to the growing awareness of critical environmental issues, including water supply and quality, air toxics (e.g., mercury), fine respirable particulate matter (PM{sub 2.5}), and the goal of zero net CO{sub 2} emissions.

  8. Sponsored by Department of Mechanical Engineering The Role of Noise and Vibration

    E-Print Network [OSTI]

    Fisher, Frank

    Sponsored by Department of Mechanical Engineering The Role of Noise and Vibration Control in the design process by: Patrick Marks, PE Johnson Control, York, PA ABSTRACT: Noise and vibration control problems and customer dissatisfaction. This presentation will show the role of noise and vibration control

  9. DOE, Westinghouse sponsor medical technician course

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding Low-Cost2 DOE HQSite toDOE, State of Idaho SignSponsor

  10. Named Fellowship Sponsor Guidelines | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines lightGeospatialDevelopment of09Sponsor Guidelines Guidelines for Argonne

  11. Sponsor Guidelines_12-17-15

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effect Photovoltaics -7541C.3 SpecialSponsor Guidelines Candidates f or t he M

  12. Los Alamos National Laboratory sponsors Hazmat Challenge

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesse BergkampCentermillion to local United WaySixLANLLANL sponsorsLANLHazmat

  13. Sponsor Guidelines | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation ofAlbuquerque|SensitiveApril 2, 2014Application Instructions Sponsor Guidelines

  14. Sponsored by Nanotechnology Seminar Program Surface Chemistry of Gold

    E-Print Network [OSTI]

    Fisher, Frank

    Sponsored by Nanotechnology Seminar Program Surface Chemistry of Gold Nanorods: Wrapping chemistry, biophysical chemistry and nanotechnology, with a primary goal to develop inorganic nanomaterials

  15. Los Alamos National Laboratory sponsors 17th annual Hazmat Challenge

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Laboratory sponsors 17th annual Hazmat Challenge Competition tests skills of hazardous materials response teams from three states. July 23, 2013 The Edmond, Okla....

  16. The University Maryland Baltimore County Office of Sponsored Programs

    E-Print Network [OSTI]

    Maryland, Baltimore County, University of

    The University Maryland Baltimore County Office of Sponsored Programs Subaward Policies and Procedures Purpose The purpose of the University Maryland Baltimore County Subaward Policies and Procedures

  17. Los Alamos National Laboratory sponsors 14th Hazmat Challenge

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Laboratory sponsors 14th Hazmat Challenge The challenge provides hazardous materials responders the opportunity to network and learn new techniques under realistic...

  18. Training is sponsoring a 12 week Dale Carnegie Course | Jefferson...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Training is sponsoring a 12 week Dale Carnegie Course: Effective Communications and Human Relations. This course will help you master the capabilities demanded in today's tough...

  19. Ownership transfer for non-federate object and time management in developing an hla compliant logistics model.

    SciTech Connect (OSTI)

    Li, Z.

    1998-01-12

    A seaport simulation model, PORTSIM, has been developed for the Department of Defense (DOD) at Argonne National Laboratory. PORTSIM simulates the detailed processes of cargo loading and unloading in a seaport and provides throughput capability, resource utilization, and other important information on the bottlenecks in a seaport operation, which are crucial data in determining troop and equipment deployment capability. There are two key problems to solve in developing the HLA-compliant PORTSIM model. The first is the cargo object ownership transfer problem. In PORTSIM, cargo items, e.g. vehicles, containers, and pallets, are objects having asset attributes. Cargo comes to a seaport for loading or unloading. The ownership of a cargo object transfers from its carrier to the port and then from the port to a new carrier. Each owner of the cargo object is responsible for publishing and updating the attributes of the cargo object when it has the ownership. This creates a unique situation in developing the PORTSIM federate object model, that is, the ownership of the object instead of the attributes needs to be changed in handling the cargo object in the PORTSIM federate. The ownership management service provided by the current RTI does not directly address this issue. The second is the time management issue. PORTSIM is an event-driven simulation that models seaport operations over time. To make PORTSIM HLA compliant, time management must be addressed to allow for synchronization with other simulation models. This paper attempts to address these two issues and methodologies developed for solving these two problems.

  20. RESPONSE ROBOTS DHS/NIST Sponsored Evaluation Exercises

    E-Print Network [OSTI]

    RESPONSE ROBOTS DHS/NIST Sponsored Evaluation Exercises RESPONSE ROBOTS DHS/NIST Sponsored Evaluation Exercises 11 Pocket Guide Version 2010.2 Pocket Guide Version 2010.2 #12;22 Certain commercial address responder-defined requirements for robot mobility, manipulation, sensors, energy, communications

  1. Location-based Sponsored Search Advertising George Trimponias1

    E-Print Network [OSTI]

    Papadias, Dimitris

    Location-based Sponsored Search Advertising George Trimponias1 , Ilaria Bartolini2 , Dimitris unprecedented opportunities for location-based advertising. In this work, we provide models and investigate the market for location-based sponsored search, where advertisers pay the search engine to be displayed

  2. New Stochastic Algorithms for Placing Ads in Sponsored Search

    E-Print Network [OSTI]

    Feuerstein, Esteban

    New Stochastic Algorithms for Placing Ads in Sponsored Search Esteban Feuerstein Depto. de@baeza.cl ABSTRACT We introduce a family of algorithms for the selection of ads in sponsored search that intends to increase ad diversity while not significantly reducing revenue and maintaining an incentive for advertisers

  3. Retailer-Wholesaler Response to State-Sponsored Marketing

    E-Print Network [OSTI]

    Neimark, Alexander V.

    Retailer-Wholesaler Response to State-Sponsored Marketing Programs: The Case of Jersey Fresh Ramu #12;Retailer-Wholesaler Response to State-Sponsored Marketing Programs: The Case of Jersey Fresh Ramu Govindasamy Aruna Pingali John Italia Daymon Thatch RUTGERS In cooperation with: Agricultural Marketing

  4. Equilibrium Bids in Sponsored Search Auctions: Theory and Evidence

    E-Print Network [OSTI]

    Cox, Ingemar J.

    where users enter search terms and receive in response lists of links to pages on the World Wide Web to all users who entered specific terms. These advertisements are called "sponsored links." Sponsored in a search term that is related to the product that the advertiser seeks to sell. For companies that run

  5. COST SHARING ON SPONSORED PROJECTS California Institute of Technology

    E-Print Network [OSTI]

    Goddard III, William A.

    COST SHARING ON SPONSORED PROJECTS California Institute of Technology Pasadena, California 1 of 4 7 Institute of Technology (Caltech) that committed cost sharing is proposed, approved, administered;COST SHARING ON SPONSORED PROJECTS California Institute of Technology Pasadena, California 2 of 4 7

  6. OFFICE OF SPONSORED RESEARCH SERVICES (OSRS) SUBAWARD PROCESS SUMMARY

    E-Print Network [OSTI]

    Kroll, Kristen L.

    Summary entry in Subsystem including copy of Notice of Award (NOA). 3. Department completes and submits to the current Purchase Order or a new Purchase Order. (NOTE: Most fixed fee subawards and subawards reimbursed. (NOTE: If it is a cost reimbursable agreement, no PAYMENT SCHEDULE is needed and the amount

  7. This Year's Sponsors The Charleston Chapter of Sigma Xi

    E-Print Network [OSTI]

    Dillon, Robert T.

    This Year's Sponsors The Charleston Chapter of Sigma Xi South Carolinians for Science Education Cof, the first sermon ever preached in the CofC Science Center, Rev. Knight suggests six guides to understanding

  8. Sponsored by Nanotechnology Seminar Program Engineering material properties using

    E-Print Network [OSTI]

    Fisher, Frank

    Sponsored by Nanotechnology Seminar Program Engineering material properties using block of other application opportunities in designing material properties through control of their nanostructure copolymers are under intense scrutiny by the semiconductor electronics industry for lithography enhancement

  9. A Study to Determine the Incentives of Companies In Their Decisions to Either Sponsor or Not to Sponsor Professional Sports Teams

    E-Print Network [OSTI]

    Rolling, David Mark

    2010-05-04

    or local franchises. Small and large companies also displayed no apparent differences in their decisions to sponsor. The implications for professional sports teams and for both current and potential sponsors are considerable if administrators and decision...

  10. Los Alamos National Laboratory sponsors 18th annual Hazmat Challenge

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesse BergkampCentermillion to local United WaySixLANLLANL sponsorsLANL sponsors

  11. Project Sponsors: California Energy Commission Department of Energy

    E-Print Network [OSTI]

    Mease, Kenneth D.

    Project Sponsors: California Energy Commission Department of Energy Shell Oil Company ADVANCED of biological waste products to produce renewable hydrogen. The region under consideration is the Southern in this study are sewage waste, municipal waste, agricultural waste, and forestry waste. The primary hydrogen

  12. POLYMER PROGRAM SEMINAR (Co-sponsored with the MSE Dept.)

    E-Print Network [OSTI]

    Alpay, S. Pamir

    POLYMER PROGRAM SEMINAR (Co-sponsored with the MSE Dept.) "Graphene-Enabled Bio-Nano Hybrids the biomolecule (DNA or protein) provides chemical recognition and a carbon nanotube (NT) or graphene transistor information, please contact YH Chudy at ychudy@ims.uconn.edu Polymer Program, Institute of Materials Science

  13. Survey of Source Modeling Techniques for ATM Networks Sponsor: Sprint

    E-Print Network [OSTI]

    Kansas, University of

    . In section 2, we introduce the earliest renewal models that do not account for the correlation of the traffic-- -- Survey of Source Modeling Techniques for ATM Networks Sponsor: Sprint Yong-Qing Lu David W, Petr, Frost Page 1 #12;-- -- Survey of Source Modeling for ATM Networks September 1993 Abstract

  14. Sponsored Programs Report The following proposals and contracts

    E-Print Network [OSTI]

    Hong, Don

    5 Sponsored Programs Report The following proposals and contracts by ETSU personnel have been the National Security Agency. "ETSU Arboretum Institutional Assess- ment" by Dr. Tim McDowell, Biological appeared in the May 20 issue of ETSU Accent). "Contract Between ETSU Research Foun- dation and ETSU

  15. University of Maryland Baltimore County Office of Sponsored Programs

    E-Print Network [OSTI]

    Maryland, Baltimore County, University of

    University of Maryland Baltimore County Office of Sponsored Programs SUBRECPIENT AND VENDOR. Will the University of Maryland Baltimore County be able to complete reports about the project without that is unique to the project and minimal supervision from the PI at the University of Maryland Baltimore County

  16. University Seminar Series Sponsored by Department of Mechanical Engineering

    E-Print Network [OSTI]

    Fisher, Frank

    University Seminar Series Sponsored by Department of Mechanical Engineering From Conventional Engineering Korea University, Seoul, Korea ABSTRACT: In this talk, I will present how conventional mechanics-material screening tool. BIOGRAPHY: Dr. Na is a Professor in the Department of Mechanical Engineering at Korea

  17. Sponsored by Nanotechnology Seminar Program Flexible and Transparent Optoelectronics

    E-Print Network [OSTI]

    Fisher, Frank

    to fabricate high-performance and flexible electronics. The physics of Quantum-dots Light Emitting Diodes as a Postdoctoral Research Associate, where he was involved in research of flexible and stretchable electronicSponsored by Nanotechnology Seminar Program Flexible and Transparent Optoelectronics based

  18. Cost Policy on Sponsored Agreements Page 12 of 12

    E-Print Network [OSTI]

    Hayden, Nancy J.

    Cost Policy on Sponsored Agreements Page 12 of 12 Appendix A - Typical Direct and F&A (Indirect Costs) Direct Costs F&A Costs Compensation & Employee Benefits: Faculty, technicians, research, local postage costs (depending upon award), bulk mail services (depending upon award) and University

  19. ENGINEERING CAREER FAIR SPONSORED BY the College of Engineering

    E-Print Network [OSTI]

    Velev, Orlin D.

    economy. Your support for our programs was reflected in 2010 when the College of Engineering was ranked 15ENGINEERING CAREER FAIR SPONSORED BY the College of Engineering McKIMMON CENTER WEDNESDAY, FEBRUARYBoothsEmployerBooths EmployerBoothsEmployerBooths Interviews #12;From the Dean of Engineering WELCOME TO THE SPRING 2014

  20. Sponsored by Mechanical Engineering Department Spine Biomechanics and

    E-Print Network [OSTI]

    Fisher, Frank

    Sponsored by Mechanical Engineering Department Spine Biomechanics and Perspectives on Surgeon of these key differences, as well as touch on some basic concepts within spine biomechanics. The goal will be introduced and discussed with relevance toward biomechanical issues. Additional discussion will involve

  1. Solar Workshop: Terawatt Challenge!!? Sponsored by UD Energy Institute

    E-Print Network [OSTI]

    Firestone, Jeremy

    Solar Workshop: Terawatt Challenge!!? Sponsored by UD Energy Institute February 28, 2014 Clayton for a High Efficiency Silicon Based Solar Cells Henri Chevrel Air Liquide 3:30 ­ 4:00 pm Recent Advances-Efficiency Silicon Solar Cells Zak Holman Arizona State University 4:30 ­ 5:00 pm Upconversion and Related Approaches

  2. RCP Spring 2011 SPONSORS MEETING PETROLEUM HALL, GREEN CENTER

    E-Print Network [OSTI]

    RCP Spring 2011 SPONSORS MEETING PETROLEUM HALL, GREEN CENTER Colorado School of Mines ­ Friedhoff Hall (Lower Level of Green Center) 1:00 - 2:30 PM Postle Field Reservoir Characterization and Pouce Coupe Fields: Matt Billingsley, CSM and Jared Atkinson, Talisman Energy 3:45 - 5:00 PM

  3. University Seminar Series Sponsored by Department of Mechanical Engineering

    E-Print Network [OSTI]

    Fisher, Frank

    harvesting from railway tack, energy harvesting and vibration control of tall buildings, and ocean wave Technology Development of Energy Harvesting in 2010 and winner of Best Application of Energy HarvestingUniversity Seminar Series Sponsored by Department of Mechanical Engineering Energy Harvesting

  4. On Aggregation Bias in Sponsored Search Data: Existence and Implications

    E-Print Network [OSTI]

    Fiat, Amos

    used daily data from search engines containing measures such as average bid, average ad position, totalOn Aggregation Bias in Sponsored Search Data: Existence and Implications VIBHANSHU ABHISHEK have been estimated using such data and the results have helped re- searchers explore the factors

  5. DESCRIPTION OF SPONSORING INSTITUTION The University of Connecticut School of Medicine (UConn SOM) is the sponsoring institution for

    E-Print Network [OSTI]

    Page 26 DESCRIPTION OF SPONSORING INSTITUTION The University of Connecticut School of Medicine/fellows. These hospitals include Connecticut Children's Medical Center, Hartford Hospital/Institute of Living, Hospital Connecticut, and the Veteran's Hospital-Newington campus. These seven hospitals make up the Capital Area

  6. Page 1 of 2 Industry Sponsored Projects at University of Washington

    E-Print Network [OSTI]

    Kaminsky, Werner

    Page 1 of 2 Industry Sponsored Projects at University of Washington The University of Washington (UW) frequently conducts research projects sponsored. 1 For more information see http://www.washington

  7. Personality fit in nascar: does driver-sponsor congruence influence sponsorship effectiveness outcomes? 

    E-Print Network [OSTI]

    Dees, Windy Lynn

    2009-05-15

    The purpose of this study was to determine if personality fit between NASCAR drivers and their major sponsors affects the sponsorship outcomes of consumer attitudes toward the sponsor, attitudes toward the brand, and ...

  8. Process Industries Division CALL FOR PAPERS

    E-Print Network [OSTI]

    Müller, Norbert

    Process Industries Division CALL FOR PAPERS The Process Industries Division of ASME is sponsoring a series of sessions on issues facing Process industries, such as Heat Exchangers Performance, Compression Technology, Water Purification / Treatment Technologies, Low Temperature Industrial Applications, etc

  9. OFFICE OF THE VICE PRESIDENT FOR RESEARCH Charging Salaries to Sponsored

    E-Print Network [OSTI]

    Alpay, S. Pamir

    OFFICE OF THE VICE PRESIDENT FOR RESEARCH Charging Salaries to Sponsored Program Accounts Jennifer OF THE VICE PRESIDENT FOR RESEARCH Academic Year Salary on Grants · Of the 9/10 month employees, in FY14, we charge salary to the sponsor · Periodically, sponsors want to know: ­ Have we devoted enough

  10. Cornell University, Office of Sponsored Programs Awards Received in May 2012

    E-Print Network [OSTI]

    Department Sponsor Project Title Amount GCO OSP Number ADAMS, VALERIE N Outreach & Extension USDA (USDA-NIFA) CORNELL UNIVERSITY SUSTAINABLE COMMUNITY PROJECT: CITIZEN U $128,000 CMA 63600 ADAMS, VALERIE N Family of Sponsored Programs Awards Received in May 2012 Principal Investigator Department Sponsor Project Title

  11. Fiscal 2016 Approved Sponsored Fringe Rates: The FY16 fringe benefit rates for sponsored program personnel (see below table) have been

    E-Print Network [OSTI]

    Alpay, S. Pamir

    Fiscal 2016 Approved Sponsored Fringe Rates: The FY16 fringe benefit rates for sponsored program). The rates are calculated by the Office of Cost Analysis using retirement and other benefit information is performed at the end of each fiscal year, and these over and under recoveries are factored into the next

  12. Sponsoring, Mentoring and Guiding Cultural Diverse Young Scientists and

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effect Photovoltaics -7541C.3 SpecialSponsor Guidelines Candidates f or t he

  13. Los Alamos National Laboratory sponsors 14th Hazmat Challenge

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesse BergkampCentermillion to local United WaySixLANLLANL sponsors 14th Hazmat

  14. Los Alamos National Laboratory sponsors 15th Hazmat Challenge

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesse BergkampCentermillion to local United WaySixLANLLANL sponsors 14th

  15. Los Alamos National Laboratory sponsors 16th Hazmat Challenge

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesse BergkampCentermillion to local United WaySixLANLLANL sponsors 14thHazmat

  16. Los Alamos National Laboratory sponsors 17th annual Hazmat Challenge

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesse BergkampCentermillion to local United WaySixLANLLANL sponsors

  17. Los Alamos National Laboratory sponsors 19th annual Hazmat Challenge

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesse BergkampCentermillion to local United WaySixLANLLANL sponsorsLANL

  18. Sponsored by Nanotechnology Seminar Program An Electroplating-Based Approach to

    E-Print Network [OSTI]

    Fisher, Frank

    Sponsored by Nanotechnology Seminar Program An Electroplating-Based Approach to Volumetric of the Singh Nanotechnology Center at the University of Pennsylvania. His research interests

  19. US DOE Sponsored Graduate Automotive Technology Education (GATE) Program at Penn State Emphasizing

    E-Print Network [OSTI]

    Lee, Dongwon

    US DOE Sponsored Graduate Automotive Technology Education (GATE) Program at Penn State Emphasizing in the automotive industry and academia. Develop relationships between GATE students, faculty, employers

  20. UNIVERSITY OF CALIFORNIA SAN DIEGO AUTHORIZATION TO APPROVE UNIVERSITY SPONSORED SPECIAL ENTERTAINMENT

    E-Print Network [OSTI]

    California at San Diego, University of

    UNIVERSITY OF CALIFORNIA SAN DIEGO AUTHORIZATION TO APPROVE UNIVERSITY SPONSORED SPECIAL, original will be forwarded to UC San Diego Travel and a copy provided to the department and Policy to UC San Diego Travel. Responsibility: Approval for all special university-sponsored entertainment

  1. HEALTH SCIENCE CENTER HANDBOOK OF OPERATING PROCEDURES Chapter 7 Research and Sponsored Programs Effective: April 2003

    E-Print Network [OSTI]

    Nicholson, Bruce J.

    HEALTH SCIENCE CENTER HANDBOOK OF OPERATING PROCEDURES Chapter 7 Research and Sponsored Programs HANDBOOK OF OPERATING PROCEDURES Chapter 7 Research and Sponsored Programs Effective: April 2003 Section 7 Effective: April 2003 Section 7.7 Clinical Research Revised: May 2015 Policy 7.7.1 Budgeting and Billing

  2. Project Sponsors: California Energy CommissionADVANCED POWER & ENERGY www.apep.uci.edu

    E-Print Network [OSTI]

    Mease, Kenneth D.

    The Renewable Energy Secure Community (RESCO) project is a program sponsored by the California Energy Commission to Renewable Energy Security RESULTS (continued) Further, an energy resource allocation and dispatch model hasProject Sponsors: California Energy CommissionADVANCED POWER & ENERGY PROGRAM www

  3. UNLV DIVISION OF RESEARCH AND GRADUATE STUDIES SPONSORED PROGRAM PROPOSAL SUBMISSION AND AWARD

    E-Print Network [OSTI]

    Walker, Lawrence R.

    university unit allowed to accept sponsored program awards. Prior review and approval from the Chair and for OSP review. Faculty and staff are not authorized to commit the institution through proposal submission and all UNL V employees who review sponsored program proposals and awards. POLICY In accordance

  4. University of California, Merced Disclosure of Financial Interests Related to Projects Sponsored by

    E-Print Network [OSTI]

    Oviedo, Néstor J.

    Interests and Management of Conflicts of Interest Related to Sponsored Projects" and federal regulationsUniversity of California, Merced Disclosure of Financial Interests Related to Projects Sponsored regarding disclosure of any financial interests that would reasonably appear to be affected by the conduct

  5. Journal of Electronic Commerce Research, VOL 12, NO 1, 2011 BIDDING ON THE BUYING FUNNEL FOR SPONSORED SEARCH AND KEYWORD

    E-Print Network [OSTI]

    Jansen, James

    engine marketing 1. Introduction Search engine marketing (a.k.a., keyword advertising, pay use of search engine advertisements (a.k.a., sponsored results, sponsored links) that appear

  6. Fighting for control : state-sponsored terrorism as foreign policy in Cuba and Libya, 1959-2010

    E-Print Network [OSTI]

    Payne, John David, Ph. D. Massachusetts Institute of Technology

    2011-01-01

    In this dissertation, I ask four inter-related questions about state-sponsored terrorism. First, under what conditions do states choose to support foreign terrorist groups? Second, when do sponsor states stop supporting ...

  7. DOE-Sponsored Field Test Finds Potential for Permanent Storage of CO2 in Lignite Seams

    Broader source: Energy.gov [DOE]

    A field test sponsored by the U.S. Department of Energy has demonstrated that opportunities to permanently store carbon in unmineable seams of lignite may be more widespread than previously documented.

  8. Invitation to Present, Sponsor, and Attend Geologic Carbon Sequestration Site Integrity: Characterization and

    E-Print Network [OSTI]

    Daniels, Jeffrey J.

    Invitation to Present, Sponsor, and Attend Geologic Carbon Sequestration Site Integrity and long-term sustainability of geologic carbon sequestration sites depends upon the ability on geologic carbon sequestration site monitoring. The management framework and costs will be similar

  9. Training is sponsoring two MS PowerPoint Courses. The course...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Training is sponsoring two MS PowerPoint Courses. The course options feature level 1 and level 2. This email is to gauge interest. The associated cost per class is 200.00. If...

  10. Rseaux & Internet -9 Octobre 2015 -Laurent Lefevre -1 Merci nos sponsors

    E-Print Network [OSTI]

    van Tiggelen, Bart

    Réseaux & Internet - 9 Octobre 2015 - Laurent Lefevre - 1 #12;Merci à nos sponsors Réseaux & Internet - 9 Octobre 2015 - Laurent Lefevre - 2 Et aux organisateurs.... #12;Réseaux & Internet - 9 Octobre 2015 - Laurent Lefevre - 3 #12;Réseaux & Internet - 9 Octobre 2015

  11. DISCLAIMER This report was prepared as an account of work sponsored by an agency of the

    E-Print Network [OSTI]

    Pennycook, Steve

    States GoUnited States Government. Neither the United States nor anernment. Neither the United States nor. This report was prepared as an account of work sponsored by an agency of the United States Government. Neither

  12. PROFESSIONAL LIABILITY LETTER All physicians in residency/fellowship programs sponsored by the University of Connecticut

    E-Print Network [OSTI]

    /fellowship programs sponsored by the University of Connecticut School of Medicine are fully protected by state statute. Rotations at approved sites outside of Connecticut are contained within this category. Notwithstanding

  13. DOE-Sponsored Software Application Assists Exploration of Gas-Rich Fayetteville Shale

    Broader source: Energy.gov [DOE]

    A project sponsored by the U.S. Department of Energy has resulted in the development of the Fayetteville Shale Infrastructure Placement Analysis System, or IPAS, which is now available online.

  14. Report on Hydrogen Storage Panel Findings in DOE-BES Sponsored...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydrogen Storage Panel Findings in DOE-BES Sponsored Workshop on Basic Research for Hydrogen Production, Storage and Use Report on Hydrogen Storage Panel Findings in DOE-BES...

  15. TO: Business Managers and Research Administrators FROM: Joseph M. Gindhart, Director -Sponsored Projects Accounting

    E-Print Network [OSTI]

    Subramanian, Venkat

    on Sponsored Projects. The information noted below was developed from the following sources; Federal Circulars specifically justified and approved as part of the project activity. o Food provided to participants in formal

  16. Brazil Week 2014Brazil Week 2014MONDAYMONDAY SEPT. 29SEPT. 29 Brazil Week is sponsored by: And co-sponsored by

    E-Print Network [OSTI]

    Bordenstein, Seth

    Brazil Week 2014Brazil Week 2014MONDAYMONDAY SEPT. 29SEPT. 29 Brazil Week is sponsored by: And co and the Brazil Week 2014 Student Committee. WEDNESDAYWEDNESDAY Oct. 1Oct. 1 THURSDAYTHURSDAY Oct. 2Oct. 2 by Professor Jay Coakley "Winners & LosersJay Coakley "Winners & Losers in Brazil: World Cupin Brazil: World

  17. Final Report for the California Energy Commission and the California Institute for Energy Efficiency. This report was prepared as a result of work sponsored by the California Energy Commission (Commission). It does not

    E-Print Network [OSTI]

    Processes of an Information Monitoring and Diagnostic System Prototype CEC Project Manager: Joseph Wang CIEELBNL-44453 CD-429 Final Report for the California Energy Commission and the California Institute for Energy Efficiency. This report was prepared as a result of work sponsored by the California Energy

  18. Women in Science and Engineering: What the Research Really Says A panel discussion co-sponsored by WISELI and the Science Alliance.

    E-Print Network [OSTI]

    Sheridan, Jennifer

    -sponsored by WISELI and the Science Alliance. Thursday April 14, 2005 Biotechnology Center Auditorium, University

  19. Award Number: Federal Non-Federal Federal Non-Federal Total

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming963 1.969 1.979Coal4 Arizona - NaturalYear JanProfile of0.06Pipeline

  20. Award Number: Federal Non-Federal Federal Non-Federal Total

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p a l De p uBUS SERVICE SUBSIDIES AT

  1. Award Number: Federal Non-Federal Federal Non-Federal Total

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p a l De p uBUS SERVICE SUBSIDIES ATj. Indirect Charges k. Totals (sum

  2. University Seminar Series Sponsored by the Nanotechnology Graduate Program

    E-Print Network [OSTI]

    Fisher, Frank

    and the development of efficient thermal management, water desalination, and solar thermal energy systems. Her work transport processes for a variety of applications including lab-on- a-chip, thermal management, and energy next generation thermal and energy systems. BIOGRAPHY Evelyn N. Wang is an Associate Professor

  3. FAQS Sponsors and Recognized Experts | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy A plug-inPPLfor InnovativeProcessing22,673,list includes the five disciplines that

  4. University of New Orleans Office of Research and Sponsored Programs Weekly Funding Opportunities March 23, 2015

    E-Print Network [OSTI]

    Li, X. Rong

    rounds for concept paper submissions to be announced. LINKS: Grants.gov TITLE: Liberia Media Development AGENCY: U.S. Agency for International Development (USAID); Liberia USAID-Monrovia ITEM: Notice seeking presence in Liberia. LINKS: Grants.gov #12;University of New Orleans Office of Research and Sponsored

  5. University of New Orleans Office of Research and Sponsored Programs Weekly Funding Opportunities December 9, 2013

    E-Print Network [OSTI]

    Kulp, Mark

    University of New Orleans Office of Research and Sponsored Programs Weekly Funding Opportunities December 9, 2013 1 SPOTLIGHTED OPPORTUNITIES FOR UNO · Department of Energy (DOE) Solar Energy Technologies January 10, 2014. Approximately $28 million is available in funding over five years. 25 percent cost share

  6. Occupancy-Based Energy Management in Buildings: Final Report to Sponsors

    E-Print Network [OSTI]

    Cerpa, Alberto E.

    ....................................................................................................................................................................5 Task 1: Describe Energy Usage in the COB (LBNL Lead Author1 Occupancy-Based Energy Management in Buildings: Final Report to Sponsors Michael D. Sohn1 Alberto Cerpa3 , Varick Ericson3 , Ankur Kamthe3 1 Environmental Energy Technologies Division Lawrence

  7. DOE-Sponsored Technology Enhances Recovery of Natural Gas in Wyoming

    Broader source: Energy.gov [DOE]

    Research sponsored by the U.S. Department of Energy Oil and Natural Gas Program has found a way to distinguish between groundwater and the water co-produced with coalbed natural gas, thereby boosting opportunities to tap into the vast supply of natural gas in Wyoming as well as Montana.

  8. Project Sponsors:UCI Combustion Laboratory www.ucicl.uci.edu

    E-Print Network [OSTI]

    Mease, Kenneth D.

    Project Sponsors:UCI Combustion Laboratory www.ucicl.uci.edu ALTERNATIVE FUELS GAS FUEL INTERCHANGE OVERVIEW Rising utilization and tight supplies of natural gas are leading to higher fuel prices or "opportunity" fuels in an effort to rein in fuel costs. Use of unprocessed natural gas, coal bed methane

  9. HEALTH SCIENCE CENTER HANDBOOK OF OPERATING PROCEDURES Chapter 7 Research and Sponsored Programs Effective: June 2000

    E-Print Network [OSTI]

    Nicholson, Bruce J.

    HEALTH SCIENCE CENTER HANDBOOK OF OPERATING PROCEDURES Chapter 7 Research and Sponsored Programs Responsibility: Vice President for Research SHARED FACILITIES Overview The mission of shared facilities at the Health Science Center is to support the research activities of investigators and their research partners

  10. HEALTH SCIENCE CENTER HANDBOOK OF OPERATING PROCEDURES Chapter 7 Research and Sponsored Programs Effective: May 2008

    E-Print Network [OSTI]

    Nicholson, Bruce J.

    HEALTH SCIENCE CENTER HANDBOOK OF OPERATING PROCEDURES Chapter 7 Research and Sponsored Programs in a standard patient care setting (non-research). #12;HEALTH SCIENCE CENTER HANDBOOK OF OPERATING PROCEDURES Effective: May 2008 Section 7.2 Human Research Protection Program Revised: June 2013 Policy 7.2.3 Research

  11. HEALTH SCIENCE CENTER HANDBOOK OF OPERATING PROCEDURES Chapter 7 Research and Sponsored Programs Effective: April 2008

    E-Print Network [OSTI]

    Nicholson, Bruce J.

    HEALTH SCIENCE CENTER HANDBOOK OF OPERATING PROCEDURES Chapter 7 Research and Sponsored Programs components of the HRPP: #12;HEALTH SCIENCE CENTER HANDBOOK OF OPERATING PROCEDURES Chapter 7 Research for Research Operations · VPR Offices o Office of the Institutional Review Board (OIRB) o Office of Clinical

  12. Funding Opportunity: Superfund Hazardous Substance Research and Training Program Sponsor: National Institute of Health

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    Funding Opportunity: Superfund Hazardous Substance Research and Training Program (P42) Sponsor Sciences (NIEHS) is announcing the continuation of the Superfund Hazardous Substance Research and Training techniques for the detection, assessment, and evaluation of the effect on human health of hazardous

  13. New DOE-Sponsored Study Helps Advance Scientific Understanding of Potential CO2 Storage Impacts

    Broader source: Energy.gov [DOE]

    In another step forward toward improved scientific understanding of potential geologic carbon dioxide storage impacts, a new U.S. Department of Energy sponsored study has confirmed earlier research showing that proper site selection and monitoring is essential for helping anticipate and mitigate possible risks.

  14. Sponsored by: National Association of Energy Service Companies Financing An Energy Upgrade

    E-Print Network [OSTI]

    Sponsored by: National Association of Energy Service Companies Financing An Energy Upgrade. Fortunately, the ability to finance energy projects using outside funding has increased over the past decade. Louis. A decade ago, not many traditional financial institutions really wanted to finance energy upgrade

  15. Project Sponsors:UCI Combustion Laboratory www.ucicl.uci.edu

    E-Print Network [OSTI]

    Mease, Kenneth D.

    Project Sponsors:UCI Combustion Laboratory www.ucicl.uci.edu GOALS ·Establish the general capabilities of time-efficient CFD models to provide reliable predictions of mixing of natural gas in model of premixers in lean combustion applications RESULTS ·Numerical cases have been generated through several steps

  16. Atmospheric and Environmental Sciences Sponsor: U.S. Department of Energy

    E-Print Network [OSTI]

    Alexandrova, Ivana

    in a piecemeal fashion. However, a combined water and energy balance approach is now viable in analyzing, including the Global Energy and Water Exchanges (GEWEX) project of the World Climate Research ProgrammeAiguo Dai Atmospheric and Environmental Sciences Sponsor: U.S. Department of Energy Dates: August

  17. Program Sponsor Abstract Deadline Amount Allowable Costs Eligibility URL Notes MARC Undergraduate

    E-Print Network [OSTI]

    Hammack, Richard

    Program Sponsor Abstract Deadline Amount Allowable Costs Eligibility URL Notes NIH MARC Expenses; F&A; Supplements An eligible institution may apply for and hold only one MARC U- STAR academic for another MARC under this FOA. John Ryan was awarded a MARC in FY11 that will not be completed until 2015

  18. Statistics GIDP Colloquia Colloquia sponsored by or of interest to faculty in the Graduate Interdisciplinary Program

    E-Print Network [OSTI]

    Watkins, Joseph C.

    Statistics GIDP Colloquia Colloquia sponsored by or of interest to faculty in the Graduate Interdisciplinary Program (GIDP) in Statistics at the University of Arizona. Fall 2013 The GIDP in Statistics research in statistics and quantitative thinking. Primary Statistics Colloquia are held the first Wednesday

  19. Project Sponsors:UCI Combustion Laboratory www.ucicl.uci.edu

    E-Print Network [OSTI]

    Mease, Kenneth D.

    Project Sponsors:UCI Combustion Laboratory www.ucicl.uci.edu MOTIVATION As Americans realize. For the most part, natural gas is composed of 90- 98% methane, CH4, with ethane and propane as the next main of the burner to optimize performance. Fuel Composition Sensors For Smart Combustion Date: 2/22/2012 GOAL

  20. Forum for Science, Industry and Business Sponsored by: Search our Site: Topic (optional)

    E-Print Network [OSTI]

    Braun, Paul

    About us Deutsch SCIENCE REPORTS B2B AREA JOBS & OPPORTUNITIES DFG RESEARCH St. Jude Children's Research, a postdoctoral fellow REPORTS & NEWS Agriculture Forestry Automotive Bioscience Chemistry Communication Media Sponsors Latest News Gene dose affects tumor growth 07.01.2008 | Bioscience Chemistry Earthquake 'memory

  1. NIH ASSIST Informa.on Session Sponsored Programs Administra.on

    E-Print Network [OSTI]

    Weber, David J.

    NIH ASSIST Informa.on Session Sponsored Programs Administra.on September 5 was developed by the NIH (in partnership with Grants.gov) to facilitate the prepara exis.ng NIH Commons profiles into the applica.ons · Capability to check

  2. "AUTHOR SPONSORED JOURNALS", A PRACTICAL VARIATION OF THE "OPEN ACCESS" BUSINESS MODEL

    E-Print Network [OSTI]

    Kaiser, Klaus

    "AUTHOR SPONSORED JOURNALS", A PRACTICAL VARIATION OF THE "OPEN ACCESS" BUSINESS MODEL KLAUS KAISER 1. Conventional business models for journal publishers All publishers, whether they are "mega their optional business model in order to stay competitive and financially sound. In the following article, I

  3. DIVERSITY PROJECTS DEVELOPMENT FUND Sponsored by the Office of the Vice Chancellor for Human Resources Management

    E-Print Network [OSTI]

    Johnson Jr.,, Ray

    DIVERSITY PROJECTS DEVELOPMENT FUND Sponsored by the Office of the Vice Chancellor for Human The Diversity Projects Development Fund (DPDF) was established by the Office of the Vice Chancellor for Human provides administrative oversight to the Diversity Projects Development Fund. Vice Chancellor Gloriana

  4. Seminars in Neuroscience Series Sponsored by the Dept. of Neurobiology and Anatomy

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    Seminars in Neuroscience Series Fall 2012 Sponsored by the Dept. of Neurobiology and Anatomy and the WVU Center for Neuroscience 8/29/2012 Randy Bruno Columbia University The many input layers, Southwestern Validation of Novel Calcium and cAMP Signaling as Therapeutic Targets for Neurological

  5. Application to Add New Computer Account or System Sponsoring/Supervising PI: ,

    E-Print Network [OSTI]

    Kurapov, Alexander

    _____________________________ Application to Add New Computer Account or System: No personally owned computer nor machines that use non-English operating systems may be connected to the CEOAS Sponsoring/Supervising PI: , Last First Complete this section if you are adding a new CEOAS computer

  6. Page 1 of 1 This policy defines participant support costs and provides guidance for their use in sponsored programs.

    E-Print Network [OSTI]

    Hutcheon, James M.

    /19/2012 Applies to: University Revised: n/a Sources: Vice-President for Research & Economic Development, Office for their use in sponsored programs. II. Policy Statement Some extramural sponsors of research projects include receiving service or training at a workshop, conference, seminar, symposium, or other short

  7. 15.01.01.M1 Treatment of Costs for Sponsored Agreements Page 1 of 2 UNIVERSITY RULE

    E-Print Network [OSTI]

    15.01.01.M1 Treatment of Costs for Sponsored Agreements Page 1 of 2 UNIVERSITY RULE 15.01.01.M1 Treatment of Costs for Sponsored Agreements Approved October 13, 1997 Revised June 6, 2001 Revised January by Texas A&M UniversityResearch Services (TAMU-RS). In compliance with Title 2 CFR Part 220, Cost

  8. Jointly Sponsored Research Program on Energy Related Research

    SciTech Connect (OSTI)

    No, author

    2013-12-31

    Cooperative Agreements, DE-FC26-08NT43293, DOE-WRI Cooperative Research and Development Program for Fossil Energy-Related Resources began in June 2009. The goal of the Program was to develop, commercialize, and deploy technologies of value to the nation’s fossil and renewable energy industries. To ensure relevancy and early commercialization, the involvement of an industrial partner was encouraged. In that regard, the Program stipulated that a minimum of 20% cost share be achieved in a fiscal year. This allowed WRI to carry a diverse portfolio of technologies and projects at various development technology readiness levels. Depending upon the maturity of the research concept and technology, cost share for a given task ranged from none to as high as 67% (two-thirds). Over the course of the Program, a total of twenty six tasks were proposed for DOE approval. Over the period of performance of the Cooperative agreement, WRI has put in place projects utilizing a total of $7,089,581 in USDOE funds. Against this funding, cosponsors have committed $7,398,476 in private funds to produce a program valued at $14,488,057. Tables 1 and 2 presented at the end of this section is a compilation of the funding for all the tasks conducted under the program. The goal of the Cooperative Research and Development Program for Fossil Energy-Related Resources was to through collaborative research with the industry, develop or assist in the development of innovative technology solutions that will: • Increase the production of United States energy resources – coal, natural gas, oil, and renewable energy resources; • Enhance the competitiveness of United States energy technologies in international markets and assist in technology transfer; • Reduce the nation's dependence on foreign energy supplies and strengthen both the United States and regional economies; and • Minimize environmental impacts of energy production and utilization. Success of the Program can be measured by several criteria. Using the deployment of the federal funding with industrial participation as a performance criterion, over the course of the program, the copsonsors contributed more dollars than the federal funds. As stated earlier, a little more than half of the funding for the Program was derived from industrial partners. The industrial partners also enthusiastically supported the research and development activities with cash contribution of $4,710,372.67, nearly 65% of the required cost share. Work on all of the tasks proposed under the Cooperative Agreement has been completed. This report summarizes and highlights the results from the Program. Under the Cooperative Agreement Program, energy-related tasks emphasized petroleum processing, upgrading and characterization, coal and biomass beneficiation and upgrading, coal combustion systems development including oxy-combustion, emissions monitoring and abatement, coal gasification technologies including gas clean-up and conditioning, hydrogen and liquid fuels production, and the development of technologies for the utilization of renewable energy resources. Environmental-related activities emphasized cleaning contaminated soils using microbial fuel cells, development of processes and sorbents for emissions reduction and recovery of water from power plant flue gas, and biological carbon capture and reuse. Technology enhancement activities included resource characterization studies, development of improved methods, monitors and sensors. In general the goals of the tasks proposed were to enhance competitiveness of U.S. technology, increase production of domestic resources, and reduce environmental impacts associated with energy production and utilization. Technologies being brought to commercialization as a result of the funds provided by the Cooperative Agreement contribute to the overall goals of the USDOE and the nation. Each has broad applicability both within the United States and abroad, thereby helping to enhance the competitiveness of U.S. energy technologies in international markets and assisting in technology t

  9. Polymer matrix composites research: A survey of federally sponsored programs

    SciTech Connect (OSTI)

    Not Available

    1990-06-01

    This report identifies research conducted by agencies of the federal government other than the Department of Energy (DOE) in the area of advanced polymer matrix composites (PMCs). DOE commissioned the report to avoid duplicating other agencies' efforts in planning its own research program for PMCs. PMC materials consist of high-strength, short or continuous fibers fused together by an organic matrix. Compared to traditional structural metals, PMCs provide greater strength and stiffness, reduced weight and increased heat resistance. The key contributors to PMC research identified by the survey are the Department of Defense (DOD), the National Aeronautics and Space Administration (NASA), the National Science Foundation (NSF), and the Department of Transportation (DOT). The survey identified a total of 778 projects. More than half of the total projects identified emphasize materials research with a goal toward developing materials with improved performance. Although an almost equal number of identified materials projects focus on thermosets and thermoplastics receive more attention because of their increased impact resistance and their easy formability and re-formability. Slightly more than one third of projects identified target structures research. Only 15 percent of the projects identified focus on manufacturing techniques, despite the need for efficient, economical methods manufacturing products constructed of PMCs--techniques required for PMCs to gain widespread acceptance. Three issues to be addressed concerning PMCs research are economy of use, improvements in processing, and education and training. Five target technologies have been identified that could benefit greatly from increased use of PMCs: aircraft fuselages, automobile frames, high-speed machinery, electronic packaging, and construction.

  10. ARM - Sponsors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Comments?govInstrumentsnoaacrnBarrow, Alaska OutreachCalendarPressExtended Facility8PlainsInstrumentsSources

  11. Deepwater Horizon Oil Spill Principal Investigator (PI) Conference Sponsored by the NSTC SOST, hosted by the University of South Florida

    E-Print Network [OSTI]

    Meyers, Steven D.

    Deepwater Horizon Oil Spill Principal Investigator (PI) Conference Sponsored Ballroom · Oil/dispersant - extent and fate Tom Ryerson, National Oceanic and Atmospheric Administration · Oil/dispersant - impacts and mitigation in coastal

  12. Joint risk of DB pension underfunding and sponsor termination: incorporating option-based projections and valuations into PIMS

    E-Print Network [OSTI]

    Lucas, Deborah J.

    When a private pension plan sponsor with an underfunded plan becomes insolvent, the difference between the value of the plan's assets and its termination liabilities represents a liability for the Pension Benefit Guaranty ...

  13. CLINICAL CHEMISTRY, Vol. 41, No. 12, 1995 1915 study is part of a multicenter study sponsored by the Ger-

    E-Print Network [OSTI]

    California at Berkeley, University of

    CLINICAL CHEMISTRY, Vol. 41, No. 12, 1995 1915 study is part of a multicenter study sponsored cancer from uranium miners. Lancet 1992;339: 576-80. 4. Bodner SM, Minna JD, Jensen SM, D'Amico D, Carbon

  14. Technical Assessment of DOE Savannah River Site-Sponsored Radionuclide Monitoring Efforts in the Central Savannah River Area

    E-Print Network [OSTI]

    Georgia, University of

    Technical Assessment of DOE Savannah River Site-Sponsored Radionuclide Monitoring Efforts............................................................................................................ 8 Standards........................................................................................................... 45 SREL CAB REC_317 Technical Review - 2 #12;Charge to SREL This document was prepared in response

  15. 2015 403(b) Plan Universal Availability Notice Florida Atlantic University ("FAU") sponsors Florida Atlantic University 403(b) Plan (the "Plan").

    E-Print Network [OSTI]

    Fernandez, Eduardo

    2015 403(b) Plan Universal Availability Notice Florida Atlantic University ("FAU") sponsors Florida Atlantic University 403(b) Plan (the "Plan"). Eligible employees of the University can voluntarily elect enroll in the FAU 403(b) Plan. Please see: http

  16. Spent graphite fuel element processing

    SciTech Connect (OSTI)

    Holder, N.D.; Olsen, C.W.

    1981-07-01

    The Department of Energy currently sponsors two programs to demonstrate the processing of spent graphite fuel elements. General Atomic in San Diego operates a cold pilot plant to demonstrate the processing of both US and German high-temperature reactor fuel. Exxon Nuclear Idaho Company is demonstrating the processing of spent graphite fuel elements from Rover reactors operated for the Nuclear Rocket Propulsion Program. This work is done at Idaho National Engineering Laboratory, where a hot facility is being constructed to complete processing of the Rover fuel. This paper focuses on the graphite combustion process common to both programs.

  17. Dimensions of service quality of the University of Arizona Sponsored Projects Services Office internal customers 

    E-Print Network [OSTI]

    Baca, David Ray

    2007-04-25

    of Arizona Sponsored Projects Services Office Internal Customers. (December 2006) David Ray Baca, B.S., Texas A&M University; M.L.I.S. The University of Texas at Austin Chair of Advisory Committee: Dr. Bryan Cole When a service transaction occurs..., confidant and dear friend. When I walked into your office and you announced that you had registered me in the MLIS program at the University of Texas I was dumbstruck by your nerve and foresight. I still am. You will live in my thoughts and heart forever...

  18. New Concepts in Hardware and Processes to Conserve Oil and Gas in Industrial Processes 

    E-Print Network [OSTI]

    Humphrey, J. L.

    1982-01-01

    A broad program to identify and evaluate new types of hardware and processes to conserve oil and gas in chemical plants and petroleum refineries has been completed. During the course of this program, which was sponsored by the Office of Industrial...

  19. A compendium of utility-sponsored energy efficiency rebate programs: Final report

    SciTech Connect (OSTI)

    Berman, E.; Cooper, M.; Geller, H.

    1987-12-01

    Rebate programs are becoming increasingly popular among utilities across the country as a method to persuade customers to purchase more energy efficient appliances, space conditioning systems, lighting products and motors. While there is substantial experience with and interest in utility rebate programs, utilities and other organizations lack comprehensive information on other utility-sponsored energy efficient rebate programs. The authors developed this Compendium to fill that gap. This Compendium contains information on 59 energy efficiency rebate programs, based upon a survey of 157 utilities. The information on each rebate program has been cross-tabulated and analyzed to identify such variables as program characteristics, products included, efficiency levels, rebate amounts, funding levels, energy and peak power savings, and the cost of peak demand reduction. Summary conclusions about these variables are also presented. 16 refs., 25 tabs.

  20. SANDIA NATIONAL LABORATORIES NFE AGREEMENTS NON-FEDERAL ENTITY...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    * DOE approval is required. * Government retains non-exclusive, paid-up, royalty-free license to all FIA-generated intellectual property for government use. DESIGNATED...

  1. Sandia National Laboratories: Strategic Partnership Projects, Non-Federal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDidDevelopment Top LDRD PublicationsDefense Systems

  2. Identifying Non-Federal Cooperating Agencies in Implementing the Procedural

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergy HeadquartersFuelBConservation Standards and TestEquipment:IanExchangeRequirements of

  3. SANDIA NATIONAL LABORATORIES NFE AGREEMENTS NON-FEDERAL ENTITY AGREEMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation of Fe(II) byMultidayAlumni > The EnergyRyan Milneret7/31/13 Page0-09) Title:

  4. Write History! Strategies for Success A writing workshop for SFU History students, co-sponsored by the SFU History

    E-Print Network [OSTI]

    -sponsored by the SFU History Student Association and the Student Learning Commons. Critical Analysis "InterpretationWrite History! Strategies for Success A writing workshop for SFU History students, co a focused, limited topic. Don't try to do too much! Techniques for focusing include talking about the topic

  5. AdAlyze Redux: Post-Click and Post-Conversion Text Feature Attribution for Sponsored Search Ads

    E-Print Network [OSTI]

    Cortes, Corinna

    AdAlyze Redux: Post-Click and Post-Conversion Text Feature Attribution for Sponsored Search Ads In this paper, we present our ongoing research on an ads quality testing tool that we call AdAlyze Redux of textual ads features, tailored to exactly the ads in an advertiser's set of accounts. This lets them

  6. An extraordinary film sponsored by the Earth Engineering Center (EEC) www.eecny.org, www.wtert.org

    E-Print Network [OSTI]

    Columbia University

    An extraordinary film sponsored by the Earth Engineering Center (EEC) www.eecny.org, www nations, like China, who have more limited resources than the U.S. A Chinese film maker, Wang Jiuliang, spent two years of his life filming the adverse impacts, on people and the Earth, of nearly six hundred

  7. Overview of DOE-Sponsored Heat Pump Research DOE research activities related to residential and commercial heat pump

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    #12;Overview of DOE-Sponsored Heat Pump Research DOE research activities related to residential and commercial heat pump technology are supported by the Office of Building Energy Research and Development%) allocated to elec- tric and heat-actuated heat pump research. The remaining 15% is allocated to appliance

  8. Integrated training in Lung Biology and Diseases Sponsored by the Division of Pulmonary and Critical Care Medicine

    E-Print Network [OSTI]

    Gleeson, Joseph G.

    Integrated training in Lung Biology and Diseases Sponsored by the Division of Pulmonary Obstructive Pulmonary Disease (COPD, Emphysema) 3 Pulmonary Infections 4 Lung Cancer 5 Cystic Fibrosis 6 Lung Transplantation 7 Pulmonary Hypertension 8 Pulmonary Embolism 9 Occupational Lung Diseases 10 Airway Allergic

  9. Export Control Red Flags If the terms and conditions of a RFP, solicitation or award from a sponsor contain any of the following

    E-Print Network [OSTI]

    Hammack, Richard

    Export Control Red Flags If the terms and conditions of a RFP, solicitation or award from a sponsor contain any of the following restrictions or limitations, there is a strong likelihood that the US Export? · Does the award specifically state that the technology involved is export controller? · Has the sponsor

  10. US NRC-Sponsored Research on Stress Corrosion Cracking Susceptibility of Dry Storage Canister Materials in Marine Environments - 13344

    SciTech Connect (OSTI)

    Oberson, Greg; Dunn, Darrell; Mintz, Todd; He, Xihua; Pabalan, Roberto; Miller, Larry

    2013-07-01

    At a number of locations in the U.S., spent nuclear fuel (SNF) is maintained at independent spent fuel storage installations (ISFSIs). These ISFSIs, which include operating and decommissioned reactor sites, Department of Energy facilities in Idaho, and others, are licensed by the U.S. Nuclear Regulatory Commission (NRC) under Title 10 of the Code of Federal Regulations, Part 72. The SNF is stored in dry cask storage systems, which most commonly consist of a welded austenitic stainless steel canister within a larger concrete vault or overpack vented to the external atmosphere to allow airflow for cooling. Some ISFSIs are located in marine environments where there may be high concentrations of airborne chloride salts. If salts were to deposit on the canisters via the external vents, a chloride-rich brine could form by deliquescence. Austenitic stainless steels are susceptible to chloride-induced stress corrosion cracking (SCC), particularly in the presence of residual tensile stresses from welding or other fabrication processes. SCC could allow helium to leak out of a canister if the wall is breached or otherwise compromise its structural integrity. There is currently limited understanding of the conditions that will affect the SCC susceptibility of austenitic stainless steel exposed to marine salts. NRC previously conducted a scoping study of this phenomenon, reported in NUREG/CR-7030 in 2010. Given apparent conservatisms and limitations in this study, NRC has sponsored a follow-on research program to more systematically investigate various factors that may affect SCC including temperature, humidity, salt concentration, and stress level. The activities within this research program include: (1) measurement of relative humidity (RH) for deliquescence of sea salt, (2) SCC testing within the range of natural absolute humidity, (3) SCC testing at elevated temperatures, (4) SCC testing at high humidity conditions, and (5) SCC testing with various applied stresses. Results to date indicate that the deliquescence RH for sea salt is close to that of MgCl{sub 2} pure salt. SCC is observed between 35 and 80 deg. C when the ambient (RH) is close to or higher than this level, even for a low surface salt concentration. (authors)

  11. The 2014 Conference on Empirical Methods In Natural Language Processing

    E-Print Network [OSTI]

    EMNLP 2014 The 2014 Conference on Empirical Methods In Natural Language Processing Proceedings of the Conference October 25-29, 2014 Doha, Qatar #12;Sponsors Diamond Platinum Gold Silver Bronze Supporter IBM #12;Preface by the General Chair Welcome to the 2014 Conference on Empirical Methods in Natural

  12. Sponsors of CIEEDAC: Environment Canada, Natural Resources Canada, Aluminium Association of Canada, Automobile Parts Manufacturing Association, Brewers Association of Canada, Canadian Energy Pipeline Association, Canadian Fertilizer Institute,

    E-Print Network [OSTI]

    Sponsors of CIEEDAC: Environment Canada, Natural Resources Canada, Aluminium Association of Canada of Canada, Chemistry Industry Association of Canada, Construction Association of Canada, Forest Products)........................................................................................ 3 1.3.2 Medium Term (2-5 years

  13. Sponsors of CIEEDAC: Natural Resources Canada, Canadian Industry Program for Energy Conservation, Aluminium Industry Association, Canadian Petroleum Products Institute, Canadian Portland Cement Association, Canadian Pulp

    E-Print Network [OSTI]

    , Canadian Pulp and Paper Association, Canadian Steel Producers Association, Canadian Textiles InstituteSponsors of CIEEDAC: Natural Resources Canada, Canadian Industry Program for Energy Conservation, Aluminium Industry Association, Canadian Petroleum Products Institute, Canadian Portland Cement Association

  14. Export Control Red Flags If the terms and conditions of an RFP, solicitation, or an award from a sponsor contain any of the

    E-Print Network [OSTI]

    Salama, Khaled

    Export Control Red Flags If the terms and conditions of an RFP or limitations, there is a strong likelihood that the US Export Control Laws involved is export controlled? 3. Has the sponsor specifically stated

  15. PPPL Reports Disclaimer This report was prepared as an account of work sponsored by an

    E-Print Network [OSTI]

    for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does loads, and seismic loading conditions. II. FEA Model Description: The vacuum vessel, modular coils (that

  16. Instrumentation and control for fossil-energy processes

    SciTech Connect (OSTI)

    Not Available

    1982-09-01

    The 1982 symposium on instrumentation and control for fossil energy processes was held June 7 through 9, 1982, at Adam's Mark Hotel, Houston, Texas. It was sponsored by the US Department of Energy, Office of Fossil Energy; Argonne National Laboratory; and the Society for Control and Instrumentation of Energy Processes. Fifty-two papers have been entered individually into EDB and ERA; eleven papers had been entered previously from other sources. (LTN)

  17. Construction Begins on DOE-Sponsored Carbon-Capture Project at...

    Energy Savers [EERE]

    modules to process more flue gas, while so-called "waste heat" from the carbon-capture system will be recovered in the cooling tower. This robust system integration will improve...

  18. Temperature and TimeResolved XRay Powder Diffraction X14A EERE sponsored PRT beamline

    E-Print Network [OSTI]

    Ohta, Shigemi

    Quadruple lamp furnace ·Insitu XRD studies on the evolution of stresses and oxide layer growth in metallic interconnects for solid oxide fuel cell (SOFC) at high temperature (ORNL) · High temperature structural diffraction studies of the chargedischarge process of lithium Plate sample heater transition metal phosphates

  19. 1. Project Details Sponsor Ref. No. (if known): InfoEd Reference (if known): RG

    E-Print Network [OSTI]

    New South Wales, University of

    the completed form to the Grants Management Office (GMO) with a copy of your proposal and a copy of the UNSW the 'Send form to GMO' button. This will load the completed form into a new email message. Ensure your email. Send the email to GMO Operations (operations.gmo@unsw.edu.au) for processing. Name Date Once all

  20. Impact and Process Evaluation of the U.S. Department of Energy's Wind Powering America Initiative

    SciTech Connect (OSTI)

    2013-05-01

    This report presents an evaluation of the impacts and processes of the former Wind Powering America(WPA) initiative sponsored by the U.S. Department of Energy (DOE). WPA has an underlying goal of dramatically increasing the use of wind energy in the U.S.

  1. Proceedings of the 1980 symposium on instrumentation and control for fossil energy processes

    SciTech Connect (OSTI)

    Doering, R.W. (comp.)

    1980-01-01

    The 1980 symposium on Instrumentation and Control for Fossil Energy Processes was held June 9-11, 1980, New Cavalier, Virginia Beach, Virginia. It was sponsored by the Argonne National Laboratory and the US Department of Energy, Office of Fossil Energy. Forty-five papers have been entered individually into EDB and ERA; nine papers had been entered previously from other sources. (LTN)

  2. Procedures for Correcting Cost Overruns on OSP Funds It is the responsibility of the PI to ensure that their sponsored program fund/index is not

    E-Print Network [OSTI]

    Lawrence, Rick L.

    Procedures for Correcting Cost Overruns on OSP Funds It is the responsibility of the PI to ensure that their sponsored program fund/index is not overspent. On occasion expenditures for a particular project may exceed the overdraft condition immediately. The procedure to be followed once a cost overrun or deficit is identified

  3. Resolution 7.35: Recommended Housing Policy Changes Concerning Greek Organizations Sponsors: Nicole Updegrove '14 (Principal), Nicole Softness '14, Andrew Trexler '14, Bruno

    E-Print Network [OSTI]

    Royer, Dana

    Resolution 7.35: Recommended Housing Policy Changes Concerning Greek Organizations Sponsors fraternity houses as student spaces on campus, Asserting furthermore that these efforts do not and cannot combat the existence of fraternity houses as centers of sexual violence and rape culture

  4. Development of Continuous Solvent Extraction Processes for Coal Derived Carbon Products

    SciTech Connect (OSTI)

    Elliot B. Kennel

    2006-12-31

    This DOE NETL-sponsored effort seeks to develop continuous processes for producing carbon products from solvent-extracted coal. A key process step is removal of solids from liquefied coal. Three different processes were compared: gravity separation, centrifugation using a decanter-type Sharples Pennwalt centrifuge, and a Spinner-II centrifuge. The data suggest that extracts can be cleaned to as low as 0.5% ash level and probably lower using a combination of these techniques.

  5. Proceedings of the 1981 symposium on instrumentation and control for fossil-energy processes

    SciTech Connect (OSTI)

    Not Available

    1982-01-01

    The 1981 symposium on instrumentation and control for fossil-energy processes was held June 8-10, 1981, at the Sheraton-Palace Hotel, San Francisco, California. It was sponsored by the US Department of Energy; Office of Fossil Energy; Argonne National Laboratory; and the Society for Control and Instrumentation of Energy Processes. Sixty-seven articles from the proceedings have been entered individually into EDB and ERA; thirteen articles had been entered previously from other sources. (LTN)

  6. An overview of RDF processing systems: Current status, design features, and future trends

    SciTech Connect (OSTI)

    Ohlsson, O.O. ); Walter, D.K. . Waste Material Management Div.); Goodman, B.J. )

    1991-01-01

    This paper discusses the recent history of refuse-derived fuel (RDF) processing facilities in the United States. The current status of these facilities, including environmental, institutional, and economic considerations is discussed. The unit operations used to produce a desired RDF product are described, and the future potential of RDF processing systems is evaluated. Current research sponsored by the US Department of Energy is also presented. 6 refs., 3 figs., 8 tabs.

  7. Malamalama 1 Platinum Sponsors

    E-Print Network [OSTI]

    Candies Central Pacific Bank Hawaiian Electric Company Hawaiian Telcom Ruth and Alfred Ono and Satoru College of Education UHM College of Education/Department of Education Field Services UHM College of Education Teacher Corps UHM College of Education Retired Faculty/Staff UHM College of Education Retirees UHM

  8. Nancy Lewis Sponsored Projects

    E-Print Network [OSTI]

    Wood, Marcelo A.

    Subcontract Officer (.75 FTE) Heather Pittman Senior Contract & Grant Officer Grace Park Principal Subcontract Industry Clinical Trials TBN Principal Contract Officer Industry Clinical Trials #12;

  9. Commercial sponsor team meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit the following comments response NAESBCommercial-Marketing-Toolkit Sign

  10. Laboratory, Valles Caldera sponsor

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousand CubicResourcelogo and masthead BerkeleySiteSeason of Giving

  11. Proceedings of the Fifth International Brain-Computer Interface Meeting 2013 DOI:10.3217/978-3-85125-260-6-127 Published by Graz University of Technology Publishing House, sponsored by medical engineering GmbH Article ID: 127

    E-Print Network [OSTI]

    Nenadic, Zoran

    .3217/978-3-85125-260-6-127 Published by Graz University of Technology Publishing House, sponsored by medical engineering GmbH Article turned off); cooperative walking (subject walked synergistically with the RoGO); and passive walking (the

  12. High-flux solar photon processes: Opportunities for applications

    SciTech Connect (OSTI)

    Steinfeld, J.I.; Coy, S.L.; Herzog, H.; Shorter, J.A.; Schlamp, M.; Tester, J.W.; Peters, W.A. (Massachusetts Inst. of Tech., Cambridge, MA (United States))

    1992-06-01

    The overall goal of this study was to identify new high-flux solar photon (HFSP) processes that show promise of being feasible and in the national interest. Electric power generation and hazardous waste destruction were excluded from this study at sponsor request. Our overall conclusion is that there is promise for new applications of concentrated solar photons, especially in certain aspects of materials processing and premium materials synthesis. Evaluation of the full potential of these and other possible applications, including opportunities for commercialization, requires further research and testing. 100 refs.

  13. A review of OSHA PSM citations relating to mechanical integrity of process piping

    SciTech Connect (OSTI)

    Casada, M.L.; Remson, A.C.; Yerger, C.M. [JBF Associates, Inc., Knoxville, TN (United States)

    1996-07-01

    OSHA`s process safety management (PSM) regulation has been in effect for more than three years. The regulation poses challenges for facilities in documenting the integrity of process piping systems. This paper summarizes the results of a project sponsored by the Materials Technology Institute (MTI) to compile PSM enforcement information relating to mechanical integrity W and process safety information (PSI) relating to equipment. This paper provides an analysis of how OSHA is citing violations of the PSM regulation as it relates to process piping. This information should be helpful to engineers and maintenance personnel who need guidance on how to ``OSHA-proof`` their mechanical integrity compliance for process piping systems.

  14. NAME: Habitat Restoration in Kaneohe Bay, Hawaii LOCATION: Kaneohe Bay, County of Honolulu, Hawaii

    E-Print Network [OSTI]

    US Army Corps of Engineers

    NAME: Habitat Restoration in Kaneohe Bay, Hawaii LOCATION: Kaneohe Bay, County of Honolulu, Hawaii ACRES: 13 acres coral reef NON-FEDERAL SPONSOR: State of Hawaii: Department of Land and Natural

  15. 17th Workshop on Crystalline Silicon Solar Cells and Modules: Materials and Processes; Workshop Proceedings

    SciTech Connect (OSTI)

    Sopori, B. L.

    2007-08-01

    The National Center for Photovoltaics sponsored the 17th Workshop on Crystalline Silicon Solar Cells & Modules: Materials and Processes, held in Vail, CO, August 5-8, 2007. This meeting provided a forum for an informal exchange of technical and scientific information between international researchers in the photovoltaic and relevant non-photovoltaic fields. The theme of this year's meeting was 'Expanding Technology for a Future Powered by Si Photovoltaics.'

  16. Commissioning Process

    Broader source: Energy.gov [DOE]

    The commissioning process for Federal facilities generally follows a four-step process. This process holds true across all forms of commissioning and for both new and existing buildings.

  17. Point processes

    E-Print Network [OSTI]

    Frederic Schoenberg

    2011-01-01

    f(t) = 0 for t Renewal models embody the notion thatmodels are surveyed including Poisson processes, renewalrenewal process originating at the corresponding parent. Self-correcting models

  18. Hydrocarbon Processing`s refining processes `96

    SciTech Connect (OSTI)

    NONE

    1996-11-01

    The paper compiles information on the following refining processes: alkylation, benzene reduction, benzene saturation, catalytic cracking, catalytic reforming, coking, crude distillation, deasphalting, deep catalytic cracking, electrical desalting, ethers, fluid catalytic cracking, hydrocracking, hydrogenation, hydrotreating, isomerization, resid catalytic cracking, treating, and visbreaking. The application, products, a description of the process, yield, economics, installation, and licensor are given for each entry.

  19. Adaptive Process Controls and Ultrasonics for High Temperature PEM MEA Manufacture

    SciTech Connect (OSTI)

    Walczyk, Daniel F.

    2015-08-26

    The purpose of this 5-year DOE-sponsored project was to address major process bottlenecks associated with fuel cell manufacturing. New technologies were developed to significantly reduce pressing cycle time for high temperature PEM membrane electrode assembly (MEA) through the use of novel, robust ultrasonic (U/S) bonding processes along with low temperature (<100°C) PEM MEAs. In addition, greater manufacturing uniformity and performance was achieved through (a) an investigation into the causes of excessive variation in ultrasonically and thermally bonded MEAs using more diagnostics applied during the entire fabrication and cell build process, and (b) development of rapid, yet simple quality control measurement techniques for use by industry.

  20. Using the DOE Logo, Seal, or Identifier on Non-Federal Products |

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE-Sessions | Department ofVP ofof EnergyFactConditionsUnder theDepartment of

  1. Designation of Non-Federal Agencies as Cooperating Agencies | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based| Department8, 20153Danielthrough theKDesert

  2. Center for Lightweighting Automotive Materials and Processing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2007 Project Title Sponsor Development of Thermoplastic Matrix Composites using Resin Infusion CLAMP Fatigue of Automotive Thermoplastics CLAMP Development of Crush-Resistant...

  3. Collection of Digital Imagery in Support of Aquatic Invasive Species Program and CERP Sponsor: U.S. Army Corps of Engineers, $100,000, 2011-2012. CESU Agreement

    E-Print Network [OSTI]

    Hill, Jeffrey E.

    : The US Army Corps of Engineers. $330,000. 2006-Present. · Development of the IFAS Vegetation Mobile. $130,000. 2001-2002. Mapping and Monitoring of Sedimentation and Sand Dune Encroachment in Lake Nasser in the Southeastern Lower Coastal Plain Region of the U.S. Sponsor: NASA. $370,000. 1999-2002. Biological Diversity

  4. HYDROLOGICAL PROCESSES Hydrol. Process. (2011)

    E-Print Network [OSTI]

    2011-01-01

    HYDROLOGICAL PROCESSES Hydrol. Process. (2011) Published online in Wiley Online Library. Many recent studies quantify historical trends in streamflow and usually attribute these trends to structure studies of streamflow responses to climate change. A wide variety of trends in streamflow have

  5. Testing of FMI's Coal Upgrading Process

    SciTech Connect (OSTI)

    Vijay Sethi

    2009-03-21

    WRI and FMI have collaborated to develop and test a novel coal upgrading technology. Proprietary coal upgrading technology is a fluidized bed-based continuous process which allows high through-puts, reducing the coal processing costs. Processing is carried out under controlled oxidizing conditions at mild enough conditions that compared to other coal upgrading technologies; the produced water is not as difficult to treat. All the energy required for coal drying and upgrading is derived from the coal itself. Under the auspices of the Jointly Sponsored Research Program, Cooperative Agreement DE-FC26-98FT40323, a nominal 400 lbs/hour PDU was constructed and operated. Over the course of this project, several low-rank coals were successfully tested in the PDU. In all cases, a higher Btu, low moisture content, stable product was produced and subsequently analyzed. Stack emissions were monitored and produced water samples were analyzed. Product stability was established by performing moisture readsorption testing. Product pyrophobicity was demonstrated by instrumenting a coal pile.

  6. Award Name Org(s) Sponsor(s)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O DBiomass andAtomsVehicles and Fuels Site MapW W W WAward

  7. Intra-Arterial Rhenium-188 Lipiodol in the Treatment of Inoperable Hepatocellular Carcinoma: Results of an IAEA-Sponsored Multination Study

    SciTech Connect (OSTI)

    Bernal, Patricia; Raoul, Jean-Luc Vidmar, Gaj; Sereegotov, Erdenechimeg; Sundram, Felix X.; Kumar, Ajay; Jeong, Jae Min; Pusuwan, Pawana; Divgi, Chaitanya; Zanzonico, Pat; Stare, Janez; Buscombe, John; Chau Trinh Thi Minh; Saw, Maung Maung; Chen Shaoliang; Ogbac, Ruben; Padhy, Ajit K.

    2007-12-01

    Purpose: Intra-arterial injections (IAI) of 131I-lipiodol is effective in treating hepatocellular carcinoma patients, but is expensive and requires a 7-day hospitalization in a radioprotection room. 188Re is inexpensive, requires no patient isolation, and can be used with lipiodol. Methods and Materials: This International Atomic Energy Agency-sponsored phase II trial aimed to assess the safety and the efficacy of a radioconjugate 188Re + lipiodol (188Re-Lip) in a large cohort of hepatocellular carcinoma patients from developing countries. A scout dose is used to determine the maximal tolerated dose (lungs <12 Gy, normal liver <30 Gy, bone marrow <1.5 Gy) and then the delivery of the calculated activity. Efficacy was assessed using response evaluation criteria in solid tumor (RECIST) and alpha-feto-protein ({alpha}FP) levels and severe adverse events were graded using the Common Toxicity Criteria of the National Cancer Institute scale v2.0. Results: The trial included 185 patients from eight countries. The procedure was feasible in all participating centers. One treatment was given to 134 patients; 42, 8, and 1 received two, three, and four injections, respectively. The injected activity during the first treatment was 100 mCi. Tolerance was excellent. We observed three complete responses and 19 partial responses (22% of evaluable patients, 95% confidence interval 16-35%); 1- and 2-year survivals were 46% and 23%. Some factors affected survival: country of origin, existence of a cirrhosis, Cancer of the Liver Italian Program score, tumor dose, absence of progression, and posttreatment decrease in {alpha}FP level. Conclusions: IAI of 188Re-Lip in developing countries is feasible, safe, cost-effective, and deserves a phase III trial.

  8. Trial Application of the Facility Safeguardability Assessment Process to the NuScale SMR Design

    SciTech Connect (OSTI)

    Coles, Garill A.; Gitau, Ernest TN; Hockert, John; Zentner, Michael D.

    2012-11-09

    FSA is a screening process intended to focus a facility designer’s attention on the aspects of their facility or process design that would most benefit from application of SBD principles and practices. The process is meant to identify the most relevant guidance within the SBD tools for enhancing the safeguardability of the design. In fiscal year (FY) 2012, NNSA sponsored PNNL to evaluate the practical application of FSA by applying it to the NuScale small modular nuclear power plant. This report documents the application of the FSA process, presenting conclusions regarding its efficiency and robustness. It describes the NuScale safeguards design concept and presents functional "infrastructure" guidelines that were developed using the FSA process.

  9. Trial Application of the Facility Safeguardability Assessment Process to the NuScale SMR Design

    SciTech Connect (OSTI)

    Coles, Garill A.; Hockert, John; Gitau, Ernest TN; Zentner, Michael D.

    2013-01-26

    FSA is a screening process intended to focus a facility designer’s attention on the aspects of their facility or process design that would most benefit from application of SBD principles and practices. The process is meant to identify the most relevant guidance within the SBD tools for enhancing the safeguardability of the design. In fiscal year (FY) 2012, NNSA sponsored PNNL to evaluate the practical application of FSA by applying it to the NuScale small modular nuclear power plant. This report documents the application of the FSA process, presenting conclusions regarding its efficiency and robustness. It describes the NuScale safeguards design concept and presents functional "infrastructure" guidelines that were developed using the FSA process.

  10. 18th Workshop on Crystalline Silicon Solar Cells and Modules: Materials and Processes; Workshop Proceedings, 3-6 August 2008, Vail, Colorado

    SciTech Connect (OSTI)

    Sopori, B. L.

    2008-09-01

    The National Center for Photovoltaics sponsored the 18th Workshop on Crystalline Silicon Solar Cells & Modules: Materials and Processes, held in Vail, CO, August 3-6, 2008. This meeting provided a forum for an informal exchange of technical and scientific information between international researchers in the photovoltaic and relevant non-photovoltaic fields. The theme of this year's meeting was 'New Directions for Rapidly Growing Silicon Technologies.'

  11. MANAGEMENT AND COMPLIANCE SPONSORED PROGRAMS

    E-Print Network [OSTI]

    Yu, Gexin

    , Jefferson Lab · Katherine Davis Small ­ WMCAR, Physics, Anthropology, OIEAHC, History · Erica Lawler Procurement Travel Contracts/Consulting Agreements Property Management Time & Effort Reporting Ethics ­ 9% Federal government ­ 82% #12; Grants Contracts Cooperative Agreements Memoranda

  12. Date OCE Title Presenter / Sponsoring

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    6:30PM7:30PM ESB G102 6 1/27/12 Saudi Aramco's Upstream Professional Development Program Development

  13. Sponsors and Advertising September 2015

    E-Print Network [OSTI]

    Lam, Vincent

    2015-01-01

    limited. See you there! OhiO ACEP is ExCiTEd TO AnnOunCE AdATE & lOCATiOn in PArTnErshiP wiTh CAlifOrniA ACEP !O hiO ACEP E mErgEnCy m EdiCinE B OArd r EviEw C OursE

  14. Sponsors and Advertising July 2015

    E-Print Network [OSTI]

    Lam, Vincent

    2015-01-01

    A nEw dATE & lOCATiOn in PArTnErshiP wiTh CAliFOrniA ACEP !O hiO ACEP E mErgEnCy m EdiCinE B OArd r EviEw C OursEsdATE OPTiOns! T hE O hiO ACEP E mErgEnCy m EdiCinE B OArd r

  15. Sponsors and Advertisements December 2015

    E-Print Network [OSTI]

    Lam, Vincent

    2015-01-01

    OhiO ACEP is ExCiTEd TO AnnOunCE AdATE & lOCATiOn in PArTnErshiP wiTh CAlifOrniA ACEP !O hiO ACEP E mErgEnCy m EdiCinE B OArd r EviEw C OursE

  16. MANAGEMENT AND COMPLIANCE SPONSORED PROGRAMS

    E-Print Network [OSTI]

    Swaddle, John

    of Visitors (even those sometimes referred to a "private BOV funds) Local Funds including funds beginning

  17. Sponsored E-Source Membership

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Programs Service (EDRP) With EDRP, you'll discover ways to make your EE and demand-response programs more effective. With E Source EDRP you can: Identify attributes...

  18. Cindy Kendrick Manager, Sponsored Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    million science and technology portfolio, spanning work ranging from cutting-edge robotics for removal of high-level radioactive waste from deteriorating underground tanks to...

  19. Sponsored Programs Enhancement Finding funding

    E-Print Network [OSTI]

    associations, other groups Apply for various types of funding Research Education (fellowships, undergrad Century, other partnerships 14 #12;JRVP Resources Specialized Library Research Liaisons Internal Reference Library, mobile, MeL & other catalogs 200 indexing, abstracting & fulltext databases Access 50

  20. Project Sponsors: California Energy Commission

    E-Print Network [OSTI]

    Mease, Kenneth D.

    Generation: H2 from Natural Gas (SMR) H2 from Petroleum Coke H2 from Coal with Carbon Capture H2 from from Natural Gas (SMR) H2 from Petroleum Coke H2 from Coal with Carbon Capture H2 from Renewable

  1. Workshop Technical Digest Sponsored by

    E-Print Network [OSTI]

    Hwang, Sung Woo

    .2 [Invited] Advanced magnetic tunnel junctions for hybrid spintronics/CMOS circuits S. Ikeda (Tohoku

  2. Sponsored By Big and Bendable

    E-Print Network [OSTI]

    Rogers, John A.

    of high-quality, even custom, plastic-based ICs with equipment not much bigger than a microwave oven, are developing flexible-circuit technologies for structural monitoring, solar energy conversion, and X

  3. LANL sponsors Quality New Mexico

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousand CubicResource and Job Event InLANL

  4. Sandia National Laboratories: Potential Sponsors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation ofAlbuquerque Albuquerque Housing EducationImageExpertise:Pollution Economic

  5. Hydrocracking process

    SciTech Connect (OSTI)

    Baird, M.J.; Gutberlet, L.C.; Miller, J.T.

    1984-02-14

    A process for hydrocracking gas oil boiling range hydrocarbon feeds comprising contacting the feed with hydrogen under hydrocracking conditions in the presence of a catalyst comprising an active metallic component comprising at least one metal having hydrogenation activity and at least one oxygenated phosphorus component, and a support component comprising at least one non-zeolitic, porous refractory inorganic oxide matrix component and at least one crystalline molecular sieve zeolite component.

  6. Hydrocracking process

    SciTech Connect (OSTI)

    Lamb, P.R.; Bakas, S.T.; Wood, B.M.

    1984-05-08

    A method is disclosed for hydrocracking a hydrocarbon feedstock having a propensity to form polynuclear aromatic compounds without excessively fouling the processing unit. The hydrocracking method includes contacting the hydrocarbon feedstock with a crystalline zeolite hydrocracking catalyst, contacting at least a portion of the resulting unconverted hydrocarbon oil containing polynuclear aromatic compounds with an adsorbent which selectively retains polynuclear aromatic compounds and recycling unconverted hydrocarbon oil having a reduced concentration of polynuclear aromatic compounds to the hydrocracking zone.

  7. HYDROLOGICAL PROCESSES Hydrol. Process. (2011)

    E-Print Network [OSTI]

    Fountain, Andrew G.

    2011-01-01

    . Simultaneous time series for electrical conductivity, water temperature, and DO over the four-week study period. The main driver of the observed variations in DO is likely to be periodic melt-freeze cycles. We conclude perturbations have large impacts on hydrological and biological processes, via changes in rates of ice and snow

  8. Hydropyrolysis process

    DOE Patents [OSTI]

    Ullman, Alan Z. (Northridge, CA); Silverman, Jacob (Woodland Hills, CA); Friedman, Joseph (Huntington Beach, CA)

    1986-01-01

    An improved process for producing a methane-enriched gas wherein a hydrogen-deficient carbonaceous material is treated with a hydrogen-containing pyrolysis gas at an elevated temperature and pressure to produce a product gas mixture including methane, carbon monoxide and hydrogen. The improvement comprises passing the product gas mixture sequentially through a water-gas shift reaction zone and a gas separation zone to provide separate gas streams of methane and of a recycle gas comprising hydrogen, carbon monoxide and methane for recycle to the process. A controlled amount of steam also is provided which when combined with the recycle gas provides a pyrolysis gas for treatment of additional hydrogen-deficient carbonaceous material. The amount of steam used and the conditions within the water-gas shift reaction zone and gas separation zone are controlled to obtain a steady-state composition of pyrolysis gas which will comprise hydrogen as the principal constituent and a minor amount of carbon monoxide, steam and methane so that no external source of hydrogen is needed to supply the hydrogen requirements of the process. In accordance with a particularly preferred embodiment, conditions are controlled such that there also is produced a significant quantity of benzene as a valuable coproduct.

  9. Ceramic Processing

    SciTech Connect (OSTI)

    EWSUK,KEVIN G.

    1999-11-24

    Ceramics represent a unique class of materials that are distinguished from common metals and plastics by their: (1) high hardness, stiffness, and good wear properties (i.e., abrasion resistance); (2) ability to withstand high temperatures (i.e., refractoriness); (3) chemical durability; and (4) electrical properties that allow them to be electrical insulators, semiconductors, or ionic conductors. Ceramics can be broken down into two general categories, traditional and advanced ceramics. Traditional ceramics include common household products such as clay pots, tiles, pipe, and bricks, porcelain china, sinks, and electrical insulators, and thermally insulating refractory bricks for ovens and fireplaces. Advanced ceramics, also referred to as ''high-tech'' ceramics, include products such as spark plug bodies, piston rings, catalyst supports, and water pump seals for automobiles, thermally insulating tiles for the space shuttle, sodium vapor lamp tubes in streetlights, and the capacitors, resistors, transducers, and varistors in the solid-state electronics we use daily. The major differences between traditional and advanced ceramics are in the processing tolerances and cost. Traditional ceramics are manufactured with inexpensive raw materials, are relatively tolerant of minor process deviations, and are relatively inexpensive. Advanced ceramics are typically made with more refined raw materials and processing to optimize a given property or combination of properties (e.g., mechanical, electrical, dielectric, optical, thermal, physical, and/or magnetic) for a given application. Advanced ceramics generally have improved performance and reliability over traditional ceramics, but are typically more expensive. Additionally, advanced ceramics are typically more sensitive to the chemical and physical defects present in the starting raw materials, or those that are introduced during manufacturing.

  10. Proposal Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass mapSpeedingProgramExemptions |(Conference)Project TourVehicles &Proposal Process

  11. Crystallization process

    DOE Patents [OSTI]

    Adler, Robert J. (Shaker Heights, OH); Brown, William R. (Brecksville, OH); Auyang, Lun (Highland Heights, OH); Liu, Yin-Chang (Richmond Heights, OH); Cook, W. Jeffrey (Cleveland Heights, OH)

    1986-01-01

    An improved crystallization process is disclosed for separating a crystallizable material and an excluded material which is at least partially excluded from the solid phase of the crystallizable material obtained upon freezing a liquid phase of the materials. The solid phase is more dense than the liquid phase, and it is separated therefrom by relative movement with the formation of a packed bed of solid phase. The packed bed is continuously formed adjacent its lower end and passed from the liquid phase into a countercurrent flow of backwash liquid. The packed bed extends through the level of the backwash liquid to provide a drained bed of solid phase adjacent its upper end which is melted by a condensing vapor.

  12. Hydrocracking process

    SciTech Connect (OSTI)

    Hudson, C.W.; Hamner, G.P.

    1986-10-21

    This patent describes a catalytic hydrocracking process which comprises: (a) contacting a hydrocarbon feed having a propensity to form polynuclear aromatic hydrocarbon compounds in a hydrocracking zone with added hydrogen and a metal promoted crystalline zeolite hydrocracking catalyst; (b) condensing the hydrocarbon effluent from the hydrocracking zone. Then, separating the same into a low boiling hydrocarbon product and unconverted hydrocarbon oil containing small quantities of polynuclear aromatic hydrocarbon compounds; (c) contacting at least a portion of the unconverted hydrocarbon oil containing polynuclear aromatic compounds with a catalyst which contains elemental iron and one or more of an alkali or alkaline-earth metal, or compound thereof. The contacting taking place in the presence of hydrogen, at conditions inclusive of temperatures sufficient to hydrogenate and hydrocrack the polynuclear aromatic hydrocarbon compounds; and (d) recycling unconverted hydrocarbon oil having a reduced concentration of polynuclear aromatic compounds resulting from step (c) to the hydrocracking zone.

  13. Hydrocracking process

    SciTech Connect (OSTI)

    Ward, J.W.; Carlson, T.L.; Millman, W.S.

    1989-05-02

    A hydrocracking process is described which comprises contacting a hydrocarbon feedstock under hydrocracking conditions with hydrogen in the presence of a hydrocracking catalyst comprising a Group VIB metal component or a non-noble Group VIII metal component on a support comprising a zeolite aluminosilicate having a mode ratio of oxides in the anhydrous state of (0.85 -1.1)M/sub 2/n/O:Al/sub 2/O/sub 3/:xSiO/sub 2/. M is a cation having a valence of ''n'' and ''x'' has a value above 9.0, the aluminosilicate having been hydrothermally treated with resultant shrinkage in the unit cell size followed by an ammonium cation exchange.

  14. Etherification process

    DOE Patents [OSTI]

    Smith, L.A. Jr.; Hearn, D.; Jones, E.M. Jr.

    1990-08-21

    A liquid phase process is described for oligomerization of C[sub 4] and C[sub 5] isoolefins or the etherification thereof with C[sub 1] to C[sub 6] alcohols wherein the reactants are contacted in a reactor with a fixed bed acid cation exchange resin catalyst at an LHSV of 5 to 20, pressure of 0 to 400 psig and temperature of 120 to 300 F wherein the improvement is the operation of the reactor at a pressure to maintain the reaction mixture at its boiling point whereby at least a portion but less than all of the reaction mixture is vaporized. By operating at the boiling point and allowing a portion of the reaction mixture to vaporize, the exothermic heat of reaction is dissipated by the formation of more boil up and the temperature in the reactor is controlled. 2 figs.

  15. Oligomerization process

    DOE Patents [OSTI]

    Smith, L.A. Jr.; Hearn, D.; Jones, E.M. Jr.

    1991-03-26

    A liquid phase process is described for oligomerization of C[sub 4] and C[sub 5] isoolefins or the etherification thereof with C[sub 1] to C[sub 6] alcohols wherein the reactants are contacted in a reactor with a fixed bed acid cation exchange resin catalyst at an LHSV of 5 to 20, pressure of 0 to 400 psig and temperature of 120 to 300 F wherein the improvement is the operation of the reactor at a pressure to maintain the reaction mixture at its boiling point whereby at least a portion but less than all of the reaction mixture is vaporized. By operating at the boiling point and allowing a portion of the reaction mixture to vaporize, the exothermic heat of reaction is dissipated by the formation of more boil up and the temperature in the reactor is controlled. 2 figures.

  16. Oligomerization process

    DOE Patents [OSTI]

    Smith, Jr., Lawrence A. (Bellaire, TX); hearn, Dennis (Houston, TX); Jones, Jr., Edward M. (Friendswood, TX)

    1991-01-01

    A liquid phase process for oligomerization of C.sub.4 and C.sub.5 isoolefins or the etherification thereof with C.sub.1 to C.sub.6 alcohols wherein the reactants are contacted in a reactor with a fixed bed acid cation exchange resin catalyst at an LHSV of 5 to 20, pressure of 0 to 400 psig and temperature of 120 to 300.degree. F. wherein the improvement is the operation of the reactor at a pressure to maintain the reaction mixture at its boiling point whereby at least a portion but less than all of the reaction mixture is vaporized. By operating at the boiling point and allowing a portion of the reaction mixture to vaporize, the exothermic heat of reaction is dissipated by the formation of more boil up and the temperature in the reactor is controlled.

  17. Etherification process

    DOE Patents [OSTI]

    Smith, Jr., Lawrence A. (Houston, TX); Hearn, Dennis (Houston, TX); Jones, Jr., Edward M. (Friendswood, TX)

    1990-01-01

    A liquid phase process for oligomerization of C.sub.4 and C.sub.5 isoolefins or the etherification thereof with C.sub.1 to C.sub.6 alcohols wherein the reactants are contacted in a reactor with a fixed bed acid cation exchange resin catalyst at an LHSV of 5 to 20, pressure of 0 to 400 psig and temperature of 120.degree. to 300.degree. F. wherein the improvement is the operation of the reactor at a pressure to maintain the reaction mixture at its boiling point whereby at least a portion but less than all of the reaction mixture is vaporized. By operating at the boiling point and allowing a portion of the reaction mixture to vaporize, the exothermic heat of reaction is dissipated by the formation of more boil up and the temperature in the reactor is controlled.

  18. Development of an Integrated Memristor/CMOS Process for Neuromorphic...

    Office of Scientific and Technical Information (OSTI)

    (SNL-NM), Albuquerque, NM (United States) Sponsoring Org: USDOE National Nuclear Security Administration (NNSA) Country of Publication: United States Language: English...

  19. Hot Injection Processes in Optically Excited States: Molecular...

    Office of Scientific and Technical Information (OSTI)

    University Research Org: Energy Frontier Research Centers (EFRC); Argonne-Northwestern Solar Energy Research Center (ANSER) Sponsoring Org: USDOE SC Office of Basic Energy...

  20. Process Design and Economics for the Conversion of Lignocellulosic...

    Office of Scientific and Technical Information (OSTI)

    Renewable Energy Laboratory (NREL), Golden, CO. Sponsoring Org: USDOE Office of Energy Efficiency and Renewable Energy Bioenergy Technologies Office Country of Publication:...

  1. Improved Processing of High Alloy Steels for Wear Components...

    Office of Scientific and Technical Information (OSTI)

    Research Equipment Collaborative Research Center Sponsoring Org: EE USDOE - Office of Energy Efficiency and Renewable Energy (EE) Country of Publication: United States Language:...

  2. Process Integration and Carbon Efficiency Workshop Summary Report

    SciTech Connect (OSTI)

    none,

    2014-12-01

    This report summarizes the results of a public workshop sponsored by DOE/EERE in Lakewood, Colorado, on June 11–12, 2014.

  3. Communications, and Signal Processing

    E-Print Network [OSTI]

    Prodiæ, Aleksandar

    : Digital signal processing ECE 462: Multimedia systems ECE 516 Intelligent image processing Biomedical: Digital signal processing ECE 462: Multimedia systems ECE 516 Intelligent image processing Biomedical: Digital signal processing ECE 462: Multimedia systems ECE 516 Intelligent image processing Biomedical

  4. Hydrocracking process

    SciTech Connect (OSTI)

    Kukes, S.G; Marshall, C.L.; Hopkins, P.D.; Hensley, A.L. Jr.

    1990-05-15

    This patent describes a process for the hydrocracking of a hydrocarbon feedstock. It comprises: reacting the feedstock with hydrogen at hydrocracking conversion conditions in the presence of a catalyst comprising a hydrogenation component comprising a Group VIB metal component and a Group VIII metal component and a support component comprising a refractory inorganic oxide component and a crystalline molecular sieve component wherein the crystalline molecular sieve component consists essentially of a first ultrastable zeolite Y wherein the framework silica to alumina molar ratio varies from about 5 to about 8 and the unit cell size varies from about 24.667 to about 24.524 Angstroms and a second more dealuminated ultrastable zeolite Y wherein the framework silica to alumina molar ratio varies from about 8 to about 200 and the unit cell size varies from a but 24.524 to about 24.343 Angstroms, wherein the amount of the first zeolite Y varies from about 40 to about 80 wt. % based on the total amount of the crystalline molecular sieve component.

  5. Differential Wiener process

    E-Print Network [OSTI]

    Penny, Will

    Stochastic Processes Will Penny Stochastic Differential Equations Wiener process Sample Paths OU rates References Stochastic Processes Will Penny 19th May 2011 #12;Stochastic Processes Will Penny on Hierarchical Dynamic Models #12;Stochastic Processes Will Penny Stochastic Differential Equations Wiener

  6. Economic assessment of advanced flue gas desulfurization processes. Final report

    SciTech Connect (OSTI)

    Bierman, G. R.; May, E. H.; Mirabelli, R. E.; Pow, C. N.; Scardino, C.; Wan, E. I.

    1981-09-01

    This report presents the results of a project sponsored by the Morgantown Energy Technology Center (METC). The purpose of the study was to perform an economic and market assessment of advanced flue gas desulfurization (FGD) processes for application to coal-fired electric utility plants. The time period considered in the study is 1981 through 1990, and costs are reported in 1980 dollars. The task was divided into the following four subtasks: (1) determine the factors affecting FGD cost evaluations; (2) select FGD processes to be cost-analyzed; (3) define the future electric utility FGD system market; and (4) perform cost analyses for the selected FGD processes. The study was initiated in September 1979, and separate reports were prepared for the first two subtasks. The results of the latter two subtasks appear only in this final reprot, since the end-date of those subtasks coincided with the end-date of the overall task. The Subtask 1 report, Criteria and Methods for Performing FGD Cost Evaluations, was completed in October 1980. A slightly modified and condensed version of that report appears as appendix B to this report. The Subtask 2 report, FGD Candidate Process Selection, was completed in January 1981, and the principal outputs of that subtask appear in Appendices C and D to this report.

  7. 1981 Memorandum of Understanding between the Federal Energy Regulatory...

    Open Energy Info (EERE)

    Service Abstract Establishes a process to promote the non-Federal development of hydroelectric energy at existing Water and Power (Reclamation) facilities. Author FERC...

  8. Extensible packet processing architecture

    DOE Patents [OSTI]

    Robertson, Perry J.; Hamlet, Jason R.; Pierson, Lyndon G.; Olsberg, Ronald R.; Chun, Guy D.

    2013-08-20

    A technique for distributed packet processing includes sequentially passing packets associated with packet flows between a plurality of processing engines along a flow through data bus linking the plurality of processing engines in series. At least one packet within a given packet flow is marked by a given processing engine to signify by the given processing engine to the other processing engines that the given processing engine has claimed the given packet flow for processing. A processing function is applied to each of the packet flows within the processing engines and the processed packets are output on a time-shared, arbitered data bus coupled to the plurality of processing engines.

  9. Hydrocarbon Processing`s process design and optimization `96

    SciTech Connect (OSTI)

    NONE

    1996-06-01

    This paper compiles information on hydrocarbon processes, describing the application, objective, economics, commercial installations, and licensor. Processes include: alkylation, ammonia, catalytic reformer, crude fractionator, crude unit, vacuum unit, dehydration, delayed coker, distillation, ethylene furnace, FCCU, polymerization, gas sweetening, hydrocracking, hydrogen, hydrotreating (naphtha, distillate, and resid desulfurization), natural gas processing, olefins, polyethylene terephthalate, refinery, styrene, sulfur recovery, and VCM furnace.

  10. 16th Workshop on Crystalline Silicon Solar Cells and Modules: Materials and Processes; Program, Extended Abstracts, and Papers

    SciTech Connect (OSTI)

    Sopori, B. L.

    2006-08-01

    The National Center for Photovoltaics sponsored the 16th Workshop on Crystalline Silicon Solar Cells and Modules: Materials and Processes held August 6-9, 2006 in Denver, Colorado. The workshop addressed the fundamental properties of PV-Si, new solar cell designs, and advanced solar cell processing techniques. It provided a forum for an informal exchange of technical and scientific information between international researchers in the photovoltaic and relevant non-photovoltaic fields. The Workshop Theme was: "Getting more (Watts) for Less ($i)". A combination of oral presentations by invited speakers, poster sessions, and discussion sessions reviewed recent advances in crystal growth, new cell structures, new processes and process characterization techniques, and cell fabrication approaches suitable for future manufacturing demands. The special sessions included: Feedstock Issues: Si Refining and Purification; Metal-impurity Engineering; Thin Film Si; and Diagnostic Techniques.

  11. These long-standing issues have been debated in various processes. The

    E-Print Network [OSTI]

    tributaries and one non-federal nuclear power plant. Bonneville provides about half the elec- tricity used in its power rates. "In essence, Bonneville was forced to bear the risks that should be the respon draft policy, ince its creation in 1937 to market the power from the Bonneville and Grand Coulee dams

  12. *This research is sponsored in part by a grant from the Division of Computing and Communication Foundations of the National Science Foundation.

    E-Print Network [OSTI]

    Pedram, Massoud

    Department of Electrical Engineering - Systems {hgoudarz, pedram}@usc.edu Abstract -- This work focuses cost reduction in the cloud system due to availability of renewable energy sources in datacenters' site sources such as wind and solar at the datacenters' site [11, 12]. Processing jobs in datacenter can

  13. (c)2001 American Institute of Aeronautics & Astronautics or Published with Permission of Author(s) and/or Author(s)' Sponsoring Organization. AIAA 2001-2842

    E-Print Network [OSTI]

    Mohseni, Kamran

    Streets Kamran Mohseni Division of Engineering and Applied Science California Institute of Technology-81, California Institute of Technology. mohseniOcds.caltech.edu ABSTRACT Periodic vortex streets, often-dimensional Euler equations. Similar to the vortex ring pinch-off process it is spec- ulated

  14. Coal liquefaction process with enhanced process solvent

    DOE Patents [OSTI]

    Givens, Edwin N. (Bethlehem, PA); Kang, Dohee (Macungie, PA)

    1984-01-01

    In an improved coal liquefaction process, including a critical solvent deashing stage, high value product recovery is improved and enhanced process-derived solvent is provided by recycling second separator underflow in the critical solvent deashing stage to the coal slurry mix, for inclusion in the process solvent pool.

  15. The Multi-Isotope Process Monitor Project: FY11 Progress and Accomplishments

    SciTech Connect (OSTI)

    Orton, Christopher R.; Fraga, Carlos G.; Hayes, John W.; Schwantes, Jon M.; Bender, Sarah E.; Unlu, Kenan; Dayman, Kenneth J.; Schreiber, S. S.; Landsberger, Sheldon

    2012-08-01

    Summary The Multi-Isotope Process (MIP) Monitor represents a potentially new and efficient approach to monitoring process conditions in reprocessing facilities with the high-level goal of aiding in the “...(minimization of) the risks of nuclear proliferation and terrorism” (Office of Technology Assessment 1995). This approach relies on multivariate analysis and gamma spectroscopy of spent fuel product and waste streams to automatically and simultaneously monitor a variety of process conditions (e.g., acid concentrations, burnup, cooling time, etc.) in near real-time (NRT). While the conceptual basis for the MIP Monitor has been shown to be effective in an aqueous reprocessing system, the fundamental approach should also be viable in a pyro-processing recycle system. The MIP Monitor may be calibrated to provide online quantitative information about process variables for process control or domestic safeguards applications; or it can simply monitor, with a built-in information barrier, for off-normal conditions in process streams, making the approach well-suited for applications were it is necessary to respect proprietary information or for international safeguards applications. Proof-of-concept simulations and experiments were performed in previous years demonstrating the validity of this tool in a laboratory setting. This report details follow-on research and development efforts sponsored by the U.S. Department of Energy Fuel Cycle Research and Development (FCR&D) related to the MIP Monitor for fiscal year 2011 (FY11).

  16. Separation Processes, Second Edition

    E-Print Network [OSTI]

    King, C. Judson

    1980-01-01

    difference. 7-G2 The Solvay process, developed to economicused by permission. ) The Solvay process uses as feeds (1) arecovery tower in the Solvay process. Ou c c IT SL Feed 2 |

  17. Salt Waste Processing Initiatives

    Office of Environmental Management (EM)

    Patricia Suggs Salt Processing Team Lead Assistant Manager for Waste Disposition Project Office of Environmental Management Savannah River Site Salt Waste Processing Initiatives 2...

  18. NAME: Restoring Coastal Estuarine Habitat in Three North Carolina Estuaries LOCATION: Brunswick, Carteret, Onslow and New Hanover Counties, North Carolina

    E-Print Network [OSTI]

    US Army Corps of Engineers

    NAME: Restoring Coastal Estuarine Habitat in Three North Carolina Estuaries LOCATION: Brunswick, Carteret, Onslow and New Hanover Counties, North Carolina ACRES: 9.3 acres of oyster habitat and 1.24 acres of saltmarsh habitat NON-FEDERAL SPONSOR: North Carolina Coastal Federation PROJECT DESCRIPTION: The proposed

  19. Cost Sharing Basics Definitions

    E-Print Network [OSTI]

    Finley Jr., Russell L.

    Cost Sharing Basics Definitions Some funding agencies require the grantee institution the project costs. Cost sharing is defined as project costs not borne by the sponsor. Cost sharing funds may resources or facilities. If the award is federal, only acceptable non-federal costs qualify as cost sharing

  20. Process Mining Framework for Software Processes

    E-Print Network [OSTI]

    van der Aalst, Wil

    Process Mining Framework for Software Processes Vladimir Rubin1,2 , Christian W. G¨unther1 , Wil M.P. van der Aalst1 , Ekkart Kindler2 , Boudewijn F. van Dongen1 , and Wilhelm Sch¨afer2 1 Eindhoven University of Paderborn, Paderborn, Germany {vroubine,kindler,wilhelm}@uni-paderborn.de Abstract. Software

  1. HYDROLOGICAL PROCESSES Hydrol. Process. 22, 980986 (2008)

    E-Print Network [OSTI]

    2008-01-01

    in their temperature. The results have consequences for thermally sensitive hydroecological processes and implications, especially when several sources of thermal energy are present, such as groundwater flow (Webb and Zhang, 1999 complexity in thermal regimes of surface water and their implications for ecological processes. A useful

  2. Bolt Manufacture: Process Selection

    E-Print Network [OSTI]

    Colton, Jonathan S.

    Bolt Manufacture: Process Selection ver. 1 ME 6222: Manufacturing Processes and Systems Prof. J.S. Colton © GIT 2009 1 #12;How would you make a bolt? ME 6222: Manufacturing Processes and Systems Prof. J: Manufacturing Processes and Systems Prof. J.S. Colton © GIT 2009 3 #12;Possible Manufacturing Methodsg for Metal

  3. Process Algebra Rance Cleaveland

    E-Print Network [OSTI]

    Process Algebra Rance Cleaveland Department of Computer Science P.O. Box 7534 North Carolina State York at Stony Brook Stony Brook, NY 11794-4400 USA April 7, 1999 Abstract Process algebra represents a mathematically rigorous framework for modeling con- current systems of interacting processes. The process-algebraic

  4. Electrotechnologies in Process Industries 

    E-Print Network [OSTI]

    Amarnath, K. R.

    1989-01-01

    applications of innovative electrotechnologies in these sectors. APPLICATIONS Electricity is predominantly used in three ways in process industries: 1. Motor Drives 2. Process Heating 3. Electrochemical Processes Motor drives are mainly used in prime..., infrared, and ultraviolet heating have found a variety of applications, and more are under development. ElectrOChemical processes for separation and synthesis (such as Chlor-Alkali production) are significant users of electricity. New processes...

  5. Experimental Quantum Process Discrimination

    E-Print Network [OSTI]

    Anthony Laing; Terry Rudolph; Jeremy L. O'Brien

    2008-07-01

    Discrimination between unknown processes chosen from a finite set is experimentally shown to be possible even in the case of non-orthogonal processes. We demonstrate unambiguous deterministic quantum process discrimination (QPD) of non-orthogonal processes using properties of entanglement, additional known unitaries, or higher dimensional systems. Single qubit measurement and unitary processes and multipartite unitaries (where the unitary acts non-separably across two distant locations) acting on photons are discriminated with a confidence of $\\geq97%$ in all cases.

  6. Catalysts for the hydrodenitrogenation of organic materials and process for the preparation of the catalysts

    DOE Patents [OSTI]

    Laine, Richard M. (Palo Alto, CA); Hirschon, Albert S. (Menlo Park, CA); Wilson, Jr., Robert B. (Mountain View, CA)

    1987-01-01

    The present invention discloses a process for forming a catalyst for the hydrodenitrogenation of an organic feedstock, which includes (a) obtaining a precatalyst comprising cobalt and molybdenum or nickel and molybdenum; (b) adding in a non-oxidizing an atmosphere selected from hydrogen, helium, nitrogen, neon, argon, carbon monoxide or mixtures thereof to the precatalyst of step (a), a transition met ORIGIN OF THE INVENTION This invention was made in the course of research partially sponsored by the Department of Energy through grants DE-FG22-83P C60781 and DE-FG-85-PC80906, and partially supported by grant CHE82-19541 of the National Science Foundation. The invention is subject to Public Law 96-517 (and amendments), and the United States Government has rights in the present invention.

  7. Report on Department of Homeland Security Sponsored Research Project at Lawrence Livermore National Laboratory on Preparation for an Improvised Nuclear Device Event

    SciTech Connect (OSTI)

    A., B

    2008-07-31

    Following the events of September 11th, a litany of imaginable horribles was trotted out before an anxious and concerned public. To date, government agencies and academics are still grappling with how to best respond to such catastrophes, and as Senator Lieberman's quote says above, now is the time to plan and prepare for such events. One of the nation's worst fears is that terrorists might detonate an improvised nuclear device (IND) in an American city. With 9/11 serving as the catalyst, the government and many NGOs have invested money into research and development of response capabilities throughout the country. Yet, there is still much to learn about how to best respond to an IND event. My summer 2008 internship at Lawrence Livermore National Laboratory afforded me the opportunity to look in depth at the preparedness process and the research that has been conducted on this issue. While at the laboratory I was tasked to collect, combine, and process research on how cities and the federal government can best prepare for the horrific prospect of an IND event. Specific projects that I was involved with were meeting reports, research reviews, and a full project report. Working directly with Brooke Buddemeier and his support team at the National Atmospheric Release Advisory Center, I was able to witness first hand, preparation for meetings with response planners to inform them of the challenges that an IND event would pose to the affected communities. In addition, I supported the Homeland Security Institute team (HSI), which was looking at IND preparation and preparing a Congressional report. I participated in meetings at which local responders expressed their concerns and contributed valuable information to the response plan. I specialized in the psycho-social aspects of an IND event and served as a technical advisor to some of the research groups. Alongside attending and supporting these meetings, I worked on an independent research project which collected information from across disciplines to outline where the state of knowledge on IND response is. In addition, the report looked at meetings that were held over the summer in various cities. The meetings were attended by both federal responders and local responders. The meetings explored issues regarding IND preparation and how to mitigate the effects of an IND detonation. Looking at the research and current preparation activity the report found that the state of knowledge in responding and communicating is a mixed bag. Some aspects of an IND attack are well understood, some are not, but much is left to synthesize. The effects of an IND would be devastating, yet much can be done to mitigate those effects through education, preparation, and research. A major gap in current knowledge is how to effectively communicate with the public before an attack. Little research on the effectiveness of public education has been done, but it is likely that educating the public about the effects of an IND and how to best protect oneself could save many lives.

  8. A Business Process Explorer: Recovering Business Processes from Business Applications

    E-Print Network [OSTI]

    Zou, Ying

    processes, and visualizing business processes using commercial business process modeling tools, such as IBM WebSphere Business Modeler (WBM) [4]. Traceability between business processes and business1 A Business Process Explorer: Recovering Business Processes from Business Applications Jin Guo

  9. High-Temperature Performance of UNS N07718 Processed by Additive...

    Office of Scientific and Technical Information (OSTI)

    (CNMS) Sponsoring Org: FE USDOE - Office of Fossil Energy (FE); EE USDOE - Office of Energy Efficiency and Renewable Energy (EE) Country of Publication: United States Language:...

  10. DEVELOPMENT OF CONTINUOUS SOLVENT EXTRACTION PROCESSES FOR COAL DERIVED CARBON PRODUCTS

    SciTech Connect (OSTI)

    Elliot Kennel; Chong Chen; Dady Dadyburjor; Mark Heavner; Manoj Katakdaunde; Liviu Magean; James Mayberry; Alfred Stiller; Joseph Stoffa; Christopher Yurchick; John Zondlo

    2009-12-31

    This NETL sponsored effort seeks to develop continuous technologies for the production of carbon products, which may be thought of as the heavier products currently produced from refining of crude petroleum and coal tars obtained from metallurgical grade coke ovens. This effort took binder grade pitch, produced from liquefaction of West Virginia bituminous grade coal, all the way to commercial demonstration in a state of the art arc furnace. Other products, such as crude oil, anode grade coke and metallurgical grade coke were demonstrated successfully at the bench scale. The technology developed herein diverged from the previous state of the art in direct liquefaction (also referred to as the Bergius process), in two major respects. First, direct liquefaction was accomplished with less than a percent of hydrogen per unit mass of product, or about 3 pound per barrel or less. By contrast, other variants of the Bergius process require the use of 15 pounds or more of hydrogen per barrel, resulting in an inherent materials cost. Second, the conventional Bergius process requires high pressure, in the range of 1500 psig to 3000 psig. The WVU process variant has been carried out at pressures below 400 psig, a significant difference. Thanks mainly to DOE sponsorship, the WVU process has been licensed to a Canadian Company, Quantex Energy Inc, with a commercial demonstration unit plant scheduled to be erected in 2011.

  11. Mechanical Systems Signal Processing

    E-Print Network [OSTI]

    Verleysen, Michel

    Mechanical Systems and Signal Processing Mechanical Systems and Signal Processing 22 (2008) 155 Department of Mechanical Engineering, University of Sheffield, Mappin Street S1 3JD Sheffield, UK Received 27

  12. Construction work process management 

    E-Print Network [OSTI]

    Soares, Jorge Barbosa

    1994-01-01

    for organizationand project-level work processes. Data to support the analysis were collected through a mailed questionnaire sent to construction executives and managers who were asked to provide information on organizational and project work processes, respectively....

  13. Digital pulse processing

    E-Print Network [OSTI]

    McCormick, Martin (Martin Steven)

    2012-01-01

    This thesis develops an exact approach for processing pulse signals from an integrate-and-fire system directly in the time-domain. Processing is deterministic and built from simple asynchronous finite-state machines that ...

  14. Gas-separation process

    DOE Patents [OSTI]

    Toy, Lora G. (San Francisco, CA); Pinnau, Ingo (Palo Alto, CA); Baker, Richard W. (Palo Alto, CA)

    1994-01-01

    A process for separating condensable organic components from gas streams. The process makes use of a membrane made from a polymer material that is glassy and that has an unusually high free volume within the polymer material.

  15. Instrumentation for Process Industries 

    E-Print Network [OSTI]

    Unknown

    2011-08-17

    The development of biofuels as an alternative fuel source highlights the MixAlco process as one method to convert organic waste into alcohol fuels. The pretreatment and fermentation of waste is integral to the process ...

  16. Fuel gas conditioning process

    DOE Patents [OSTI]

    Lokhandwala, Kaaeid A. (Union City, CA)

    2000-01-01

    A process for conditioning natural gas containing C.sub.3+ hydrocarbons and/or acid gas, so that it can be used as combustion fuel to run gas-powered equipment, including compressors, in the gas field or the gas processing plant. Compared with prior art processes, the invention creates lesser quantities of low-pressure gas per unit volume of fuel gas produced. Optionally, the process can also produce an NGL product.

  17. COURSE OUTLINE Stochastic Processes

    E-Print Network [OSTI]

    Smith, Robert L.

    ; the Poisson process; renewal theory; Markov chains; and some continuous state models including Brownian motion.umich.edu COURSE DESCRIPTION: This is a basic course in stochastic processes with emphasis on model building to Probability Models, Academic Press, latest. REFERENCES: Cinlar, E., Introduction to Stochastic Processes

  18. Mechanical Systems Signal Processing

    E-Print Network [OSTI]

    Ray, Asok

    Mechanical Systems and Signal Processing Mechanical Systems and Signal Processing 21 (2007) 866 and analytical models. This paper attempts to address this inadequacy by taking advantage of advanced signal processing and pattern recognition tools. Since a vast majority of structural components that are prone

  19. Semisolid Metal Processing Consortium

    SciTech Connect (OSTI)

    Apelian,Diran

    2002-01-10

    Mathematical modeling and simulations of semisolid filling processes remains a critical issue in understanding and optimizing the process. Semisolid slurries are non-Newtonian materials that exhibit complex rheological behavior. There the way these slurries flow in cavities is very different from the way liquid in classical casting fills cavities. Actually filling in semisolid processing is often counter intuitive

  20. Dynamical laser spike processing

    E-Print Network [OSTI]

    Shastri, Bhavin J; Tait, Alexander N; Rodriguez, Alejandro W; Wu, Ben; Prucnal, Paul R

    2015-01-01

    Novel materials and devices in photonics have the potential to revolutionize optical information processing, beyond conventional binary-logic approaches. Laser systems offer a rich repertoire of useful dynamical behaviors, including the excitable dynamics also found in the time-resolved "spiking" of neurons. Spiking reconciles the expressiveness and efficiency of analog processing with the robustness and scalability of digital processing. We demonstrate that graphene-coupled laser systems offer a unified low-level spike optical processing paradigm that goes well beyond previously studied laser dynamics. We show that this platform can simultaneously exhibit logic-level restoration, cascadability and input-output isolation---fundamental challenges in optical information processing. We also implement low-level spike-processing tasks that are critical for higher level processing: temporal pattern detection and stable recurrent memory. We study these properties in the context of a fiber laser system, but the addit...

  1. PRODUCTION OF CARBON PRODUCTS USING A COAL EXTRACTION PROCESS

    SciTech Connect (OSTI)

    Dady Dadyburjor; Philip R. Biedler; Chong Chen; L. Mitchell Clendenin; Manoj Katakdaunde; Elliot B. Kennel; Nathan D. King; Liviu Magean; Peter G. Stansberry; Alfred H. Stiller; John W. Zondlo

    2004-08-31

    This Department of Energy National Energy Technology Laboratory sponsored project developed carbon products, using mildly hydrogenated solvents to extract the organic portion of coal to create synthetic pitches, cokes, carbon foam and carbon fibers. The focus of this effort was on development of lower cost solvents, milder hydrogenation conditions and improved yield in order to enable practical production of these products. This technology is needed because of the long-term decline in production of domestic feedstocks such as petroleum pitch and coal tar pitch. Currently, carbon products represents a market of roughly 5 million tons domestically, and 19 million tons worldwide. Carbon products are mainly derived from feedstocks such as petroleum pitch and coal tar pitch. The domestic supply of petroleum pitch is declining because of the rising price of liquid fuels, which has caused US refineries to maximize liquid fuel production. As a consequence, the long term trend has a decline in production of petroleum pitch over the past 20 years. The production of coal tar pitch, as in the case of petroleum pitch, has likewise declined significantly over the past two decades. Coal tar pitch is a byproduct of metallurgical grade coke (metcoke) production. In this industry, modern metcoke facilities are recycling coal tar as fuel in order to enhance energy efficiency and minimize environmental emissions. Metcoke production itself is dependent upon the production requirements for domestic steel. Hence, several metcoke ovens have been decommissioned over the past two decades and have not been replaced. As a consequence sources of coal tar are being taken off line and are not being replaced. The long-term trend is a reduction in coal tar pitch production. Thus import of feedstocks, mainly from Eastern Europe and China, is on the rise despite the relatively large transportation cost. To reverse this trend, a new process for producing carbon products is needed. The process must be economically competitive with current processes, and yet be environmentally friendly as well. The solvent extraction process developed uses mild hydrogenation of low cost oils to create powerful solvents that can dissolve the organic portion of coal. The insoluble portion, consisting mainly of mineral matter and fixed carbon, is removed via centrifugation or filtration, leaving a liquid solution of coal chemicals and solvent. This solution can be further refined via distillation to meet specifications for products such as synthetic pitches, cokes, carbon foam and fibers. The most economical process recycles 85% of the solvent, which itself is obtained as a low-cost byproduct from industrial processes such as coal tar or petroleum refining. Alternatively, processes have been developed that can recycle 100% of the solvent, avoiding any need for products derived from petroleum or coal tar.

  2. Future Steelmaking Processes

    SciTech Connect (OSTI)

    Prof. R. J. Fruehan

    2004-09-20

    There is an increasing demand for an ironmaking process with lower capital cost, energy consumption and emissions than a blast furnace. It is the hypothesis of the present work that an optimized combination of two reasonable proven technologies will greatly enhance the overall process. An example is a rotary hearth furnace (RHF) linked to a smelter (e.g., AISI, HIsmelt). The objective of this research is to select promising process combinations, develop energy, materials balance and productivity models for the individual processes, conduct a limited amount of basic research on the processes and evaluate the process combinations. Three process combinations were selected with input from the industrial partners. The energy-materials and productivity models for the RHF, smelter, submerged arc furnace and CIRCOFER were developed. Since utilization of volatiles in coal is critical for energy and CO{sub 2} emission reduction, basic research on this topic was also conducted. The process models developed are a major product developed in this research. These models can be used for process evaluation by the industry. The process combinations of an RHF-Smelter and a simplified CIRCOFER-Smelter appear to be promising. Energy consumption is reduced and productivity increased. Work on this project is continuing using funds from other sources.

  3. Agreement Execution Process Study: CRADAs and NF-WFO Agreements and the Speed of Business

    SciTech Connect (OSTI)

    Harrer, Bruce J.; Cejka, Cheryl L.; Macklin, Richard; Miksovic, Ann

    2011-02-01

    This report summarizes the findings of a study on the execution of Cooperative Research and Development Agreements (CRADAs) and Non-Federal Work for Others (NF-WFO) agreements across the U.S. Department of Energy (DOE) laboratory complex. The study provides quantitiative estimates of times required to negotiate and execute these agreements across the DOE complex. It identifies factors impacting on cycle times and describes best practicies used at various laboratories and site offices that reduce cycle times.

  4. Multiphoton processes: conference proceedings

    SciTech Connect (OSTI)

    Lambropoulos, P.; Smith, S.J. (eds.)

    1984-01-01

    The chapters of this volume represent the invited papers delivered at the conference. They are arranged according to thermatic proximity beginning with atoms and continuing with molecules and surfaces. Section headings include multiphoton processes in atoms, field fluctuations and collisions in multiphoton process, and multiphoton processes in molecules and surfaces. Abstracts of individual items from the conference were prepared separately for the data base. (GHT)

  5. TEP process flow diagram

    SciTech Connect (OSTI)

    Wilms, R Scott; Carlson, Bryan; Coons, James; Kubic, William

    2008-01-01

    This presentation describes the development of the proposed Process Flow Diagram (PFD) for the Tokamak Exhaust Processing System (TEP) of ITER. A brief review of design efforts leading up to the PFD is followed by a description of the hydrogen-like, air-like, and waterlike processes. Two new design values are described; the mostcommon and most-demanding design values. The proposed PFD is shown to meet specifications under the most-common and mostdemanding design values.

  6. Industrial process surveillance system

    DOE Patents [OSTI]

    Gross, K.C.; Wegerich, S.W.; Singer, R.M.; Mott, J.E.

    1998-06-09

    A system and method are disclosed for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy. 96 figs.

  7. Industrial Process Surveillance System

    DOE Patents [OSTI]

    Gross, Kenneth C. (Bolingbrook, IL); Wegerich, Stephan W (Glendale Heights, IL); Singer, Ralph M. (Naperville, IL); Mott, Jack E. (Idaho Falls, ID)

    2001-01-30

    A system and method for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy.

  8. Industrial process surveillance system

    DOE Patents [OSTI]

    Gross, Kenneth C. (Bolingbrook, IL); Wegerich, Stephan W. (Glendale Heights, IL); Singer, Ralph M. (Naperville, IL); Mott, Jack E. (Idaho Falls, ID)

    1998-01-01

    A system and method for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy.

  9. Continuous sulfur removal process

    DOE Patents [OSTI]

    Jalan, deceased, Vinod (late of Concord, MA); Ryu, Jae (Cambridge, MA)

    1994-01-01

    A continuous process for the removal of hydrogen sulfide from a gas stream using a membrane comprising a metal oxide deposited on a porous support is disclosed.

  10. Milestone Plan Process Improvement

    Office of Environmental Management (EM)

    community's concern over the milestone plan (MP) process within the system, the STRIPES Project Office initiated an in-depth evaluation of the required steps and issues...

  11. Living olefin polymerization processes

    DOE Patents [OSTI]

    Schrock, R.R.; Baumann, R.

    1999-03-30

    Processes for the living polymerization of olefin monomers with terminal carbon-carbon double bonds are disclosed. The processes employ initiators that include a metal atom and a ligand having two group 15 atoms and a group 16 atom or three group 15 atoms. The ligand is bonded to the metal atom through two anionic or covalent bonds and a dative bond. The initiators are particularly stable under reaction conditions in the absence of olefin monomer. The processes provide polymers having low polydispersities, especially block copolymers having low polydispersities. It is an additional advantage of these processes that, during block copolymer synthesis, a relatively small amount of homopolymer is formed.

  12. Cooking with Processed Cheese 

    E-Print Network [OSTI]

    Anding, Jenna

    2008-12-09

    This fact sheet describes the nutritional value and safe storage of processed cheese, a commodity food. It also offers food preparation ideas.

  13. WAKE FOREST UNIVERSITY OFFICE of RESEARCH & SPONSORED

    E-Print Network [OSTI]

    Anderson, Paul R.

    , Wildacres Retreat Robert Hellyer, History, Green Tea and the Path to an Industrial, International Japan

  14. Deb Covey, Associate Director for Sponsored Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding Low-Cost2 DOENERSC Overview * Mr. Mark Whitney Dr.What

  15. Confidential Sponsored by the IEEE Magnetic Society

    E-Print Network [OSTI]

    Sobelman, Gerald E.

    ) Shingled and Two-Dimensional Magnetic Recording Heat Assisted Magnetic Recording Bit Patterned Magnetic in Minneapolis. The magnetic recording technology and industry continues to progress at an astonishing rate, assisted-write technologies such as Heat Assisted Magnetic Recording (HAMR), perhaps Microwave Assisted

  16. 27th Annual SPonsor/Exhibitor prospectus

    E-Print Network [OSTI]

    Martinez, Tony R.

    from your com- pany to staff the booth. Listing of your company's name, address, product description, Provo, Utah #12;Exhibitor Information Website: www.granttaggart.com Supply and Demand . . . You, and booth number in program materials. To ensure your inclusion in this listing, the contractual agreement

  17. 25th Annual SPonsor/Exhibitor prospectus

    E-Print Network [OSTI]

    Martinez, Tony R.

    persons from your com- pany to staff the booth. Listing of your company's name, address, product, Provo, Utah #12;Exhibitor Information Website: www.granttaggart.com Supply and Demand . . . You description, and booth number in program materials. To ensure your inclusion in this listing, the contractual

  18. Project Sponsor: An Original Equipment Manufacturer (confidential)

    E-Print Network [OSTI]

    Mease, Kenneth D.

    transfer within the boiler while staying within the O2 concentration limits set by existing equipment high concentration of CO2 in the gas flowing through the boiler, the difference in physical properties air into the boiler, a downstream CO2purification step (cryogenic) is required to meet

  19. NERSC Sponsors Lunchtime Nobel Keynote Lecture Series

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Panel on Climate Change "The Brief History and Future Development of Earth System Models: Resolution and Complexity" Berkeley Lab, Bldg. 66 auditorium, 12 noon to 1:30...

  20. Tech Micro Services NIST Sponsored Workshop

    E-Print Network [OSTI]

    for a variety of diagnostic radiological , therapeutic , and experimental purposes. OSL nanoDots can be used, providing accurate, sensitive, and reliable dose estimates. (Landauer Inc is AALA accredited facility) #12

  1. This series is sponsored "Entrepreneurship and

    E-Print Network [OSTI]

    Mofrad, Mohammad R. K.

    . She has provided testimony on fuels and transportation to the California State Senate, supported an international congressional delegation of the Senate Energy and Natural Resources Committee on clean energy

  2. DOE-EPSCOR SPONSORED PROJECT FINAL REPORT

    SciTech Connect (OSTI)

    Zhu, Jianting

    2010-03-11

    Concern over the quality of environmental management and restoration has motivated the model development for predicting water and solute transport in the vadose zone. Soil hydraulic properties are required inputs to subsurface models of water flow and contaminant transport in the vadose zone. Computer models are now routinely used in research and management to predict the movement of water and solutes into and through the vadose zone of soils. Such models can be used successfully only if reliable estimates of the soil hydraulic parameters are available. The hydraulic parameters considered in this project consist of the saturated hydraulic conductivity and four parameters of the water retention curves. To quantify hydraulic parameters for heterogeneous soils is both difficult and time consuming. The overall objective of this project was to better quantify soil hydraulic parameters which are critical in predicting water flows and contaminant transport in the vadose zone through a comprehensive and quantitative study to predict heterogeneous soil hydraulic properties and the associated uncertainties. Systematic and quantitative consideration of the parametric heterogeneity and uncertainty can properly address and further reduce predictive uncertainty for contamination characterization and environmental restoration at DOE-managed sites. We conducted a comprehensive study to assess soil hydraulic parameter heterogeneity and uncertainty. We have addressed a number of important issues related to the soil hydraulic property characterizations. The main focus centered on new methods to characterize anisotropy of unsaturated hydraulic property typical of layered soil formations, uncertainty updating method, and artificial neural network base pedo-transfer functions to predict hydraulic parameters from easily available data. The work also involved upscaling of hydraulic properties applicable to large scale flow and contaminant transport modeling in the vadose zone and geostatistical characterization of hydraulic parameter heterogeneity. The project also examined the validity of the some simple average schemes for unsaturated hydraulic properties widely used in previous studies. A new suite of pedo-transfer functions were developed to improve the predictability of hydraulic parameters. We also explored the concept of tension-dependent hydraulic conductivity anisotropy of unsaturated layered soils. This project strengthens collaboration between researchers at the Desert Research Institute in the EPSCoR State of Nevada and their colleagues at the Pacific Northwest National Laboratory. The results of numerical simulations of a field injection experiment at Hanford site in this project could be used to provide insights to the DOE mission of appropriate contamination characterization and environmental remediation.

  3. Other Sponsors of the Forum Materials Science

    E-Print Network [OSTI]

    Suslick, Kenneth S.

    humidity, reduce static electricity and ease discomfort from the common cold or cough. In the lab, chemists

  4. Co-Sponsored by: Environmental Research Group

    E-Print Network [OSTI]

    2015 Spring Seminar Series April 21, 2015 Gregg 320, 12:30 ­ 2:00 Sustainability in Beauty binders and aggregates is essential to the performance of asphalt mixtures. We used the modified Atomic-modified AFM probes differentiated the performance of different asphalt binders. Results also suggested

  5. Boston University Office of Sponsored Programs

    E-Print Network [OSTI]

    Guenther, Frank

    will not be established in the SAP financial system until this review and approval has occurred. There is a high volume that the responsible Department has the resources and facilities to carry out the project; and to assess the potential

  6. DIMENSIONS of DISCOVERY Sponsored Program Awards

    E-Print Network [OSTI]

    Ginzel, Matthew

    , from Ecotope Inc, $102,000, "Amendment No 1 - Performance Testing of Ductless Heat Pumps." Cai, Liping & astronautical engineering, industrial & physical pharmacy, from Abbott Laboratories, $80,000, "Purdue." Caldwell, Barrett S; industrial engineering,

  7. DIMENSIONS of DISCOVERY Sponsored Program Awards

    E-Print Network [OSTI]

    Ginzel, Matthew

    Low-CostTechnologyfortheNextGeneration of High Efficiency Solar Cells; Modification 3 for Grant 105663." (a Discovery Park award -- Energy Center engineering, electrical & computer engineering, from U.S. Department of Energy, $25,999, "Development of-Throughput Pathogen RNA Detection System for Dairy Products." Bhunia,ArunK;foodscience,fromEmbassy oftheArabRepublicofEgypt

  8. Multi-Keyword Sponsored Search Peerapong Dhangwatnotai

    E-Print Network [OSTI]

    Sandholm, Tuomas W.

    keywords when we discuss search advertising with multiple search terms. When a user enters a search term search engines' mechanism for allocating im- pressions generated from different search terms. This mech- anism is equivalent to running an independent GSP auc- tion for each search term only when the number

  9. UNCLASSIFIED Institute for Materials Science Sponsored Lecture

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With WIPP UPDATE:Administration BratislavatUNCLASSIFIED 2Antonia

  10. UNCLASSIFIED Institute for Materials Science Sponsored Lecture

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With WIPP UPDATE:Administration BratislavatUNCLASSIFIED

  11. UNCLASSIFIED Institute for Materials Science Sponsored Seminar

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With WIPP UPDATE:Administration BratislavatUNCLASSIFIEDDr. Sergii

  12. UNCLASSIFIED Institute for Materials Science Sponsored Seminar

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With WIPP UPDATE:Administration BratislavatUNCLASSIFIEDDr.

  13. LANL sponsors Recovery Act Job Fair

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousand CubicResource and Job Event InLANLRecovery Act Job Fair October

  14. LANL sponsors Recovery Act Job Fair

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesse Bergkamp Graduate student Subtask2 J.N.open to badgeLANL

  15. Laboratory, Valles Caldera sponsor environmental science event

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesse Bergkamp Graduate studentScienceLaboratory program

  16. ORISE: Research Participation Programs by Sponsor

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesseworkSURVEY UNIVERSEHow ORISE is Making aDoseRadiologicalORISE Science

  17. Science Bowl Sponsors | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation ofAlbuquerque| Stanford SynchrotronVideo-Contest Sign InMarchDepartment Science

  18. Chemical process hazards analysis

    SciTech Connect (OSTI)

    1996-02-01

    The Office of Worker Health and Safety (EH-5) under the Assistant Secretary for the Environment, Safety and Health of the US Department (DOE) has published two handbooks for use by DOE contractors managing facilities and processes covered by the Occupational Safety and Health Administration (OSHA) Rule for Process Safety Management of Highly Hazardous Chemicals (29 CFR 1910.119), herein referred to as the PSM Rule. The PSM Rule contains an integrated set of chemical process safety management elements designed to prevent chemical releases that can lead to catastrophic fires, explosions, or toxic exposures. The purpose of the two handbooks, ``Process Safety Management for Highly Hazardous Chemicals`` and ``Chemical Process Hazards Analysis,`` is to facilitate implementation of the provisions of the PSM Rule within the DOE. The purpose of this handbook ``Chemical Process Hazards Analysis,`` is to facilitate, within the DOE, the performance of chemical process hazards analyses (PrHAs) as required under the PSM Rule. It provides basic information for the performance of PrHAs, and should not be considered a complete resource on PrHA methods. Likewise, to determine if a facility is covered by the PSM rule, the reader should refer to the handbook, ``Process Safety Management for Highly Hazardous Chemicals`` (DOE- HDBK-1101-96). Promulgation of the PSM Rule has heightened the awareness of chemical safety management issues within the DOE. This handbook is intended for use by DOE facilities and processes covered by the PSM rule to facilitate contractor implementation of the PrHA element of the PSM Rule. However, contractors whose facilities and processes not covered by the PSM Rule may also use this handbook as a basis for conducting process hazards analyses as part of their good management practices. This handbook explains the minimum requirements for PrHAs outlined in the PSM Rule. Nowhere have requirements been added beyond what is specifically required by the rule.

  19. Process Metallurgy Course Outline

    E-Print Network [OSTI]

    New South Wales, University of

    -6 8 Reactor design 6 Midsession exam Week 6-7 8 Blast furnace ironmaking 7-8 Assignment 9 Reactions in the blast furnace 9 10 Development of the blast furnace ironmaking to decrease carbon footprint 9 11 Alternative ironmaking processes 10 12 Steelmaking: Bessemer and BOS processes, Electric arc furnace 10-11 13

  20. Associative list processing unit

    DOE Patents [OSTI]

    Hemmert, Karl Scott; Underwood, Keith D.

    2013-01-29

    An associative list processing unit and method comprising employing a plurality of prioritized cell blocks and permitting inserts to occur in a single clock cycle if all of the cell blocks are not full. Also, an associative list processing unit and method comprising employing a plurality of prioritized cell blocks and using a tree of prioritized multiplexers descending from the plurality of cell blocks.

  1. Gas-separation process

    DOE Patents [OSTI]

    Toy, L.G.; Pinnau, I.; Baker, R.W.

    1994-01-25

    A process is described for separating condensable organic components from gas streams. The process makes use of a membrane made from a polymer material that is glassy and that has an unusually high free volume within the polymer material. 6 figures.

  2. Foam Processing of Textiles 

    E-Print Network [OSTI]

    Bafford, R. A.; Namboodri, C. G.

    1984-01-01

    Foam processing is an energy-conserving alternative to the conventional wet processing, i.e., dyeing, printing and finishing, of textiles. Where water is ordinarily used as a medium to apply dyes or chemicals to a fabric, up to 75% of the water can...

  3. HEPA filter dissolution process

    DOE Patents [OSTI]

    Brewer, K.N.; Murphy, J.A.

    1994-02-22

    A process is described for dissolution of spent high efficiency particulate air (HEPA) filters and then combining the complexed filter solution with other radioactive wastes prior to calcining the mixed and blended waste feed. The process is an alternate to a prior method of acid leaching the spent filters which is an inefficient method of treating spent HEPA filters for disposal. 4 figures.

  4. Hepa filter dissolution process

    DOE Patents [OSTI]

    Brewer, Ken N. (Arco, ID); Murphy, James A. (Idaho Falls, ID)

    1994-01-01

    A process for dissolution of spent high efficiency particulate air (HEPA) filters and then combining the complexed filter solution with other radioactive wastes prior to calcining the mixed and blended waste feed. The process is an alternate to a prior method of acid leaching the spent filters which is an inefficient method of treating spent HEPA filters for disposal.

  5. Microsystem process networks

    DOE Patents [OSTI]

    Wegeng, Robert S [Richland, WA; TeGrotenhuis, Ward E [Kennewick, WA; Whyatt, Greg A [West Richland, WA

    2010-01-26

    Various aspects and applications or microsystem process networks are described. The design of many types of microsystems can be improved by ortho-cascading mass, heat, or other unit process operations. Microsystems having energetically efficient microchannel heat exchangers are also described. Detailed descriptions of numerous design features in microcomponent systems are also provided.

  6. Microsystem process networks

    DOE Patents [OSTI]

    Wegeng, Robert S. (Richland, WA); TeGrotenhuis, Ward E. (Kennewick, WA); Whyatt, Greg A. (West Richland, WA)

    2007-09-18

    Various aspects and applications of microsystem process networks are described. The design of many types of Microsystems can be improved by ortho-cascading mass, heat, or other unit process operations. Microsystems having energetically efficient microchannel heat exchangers are also described. Detailed descriptions of numerous design features in microcomponent systems are also provided.

  7. Microsystem process networks

    DOE Patents [OSTI]

    Wegeng, Robert S. (Richland, WA); TeGrotenhuis, Ward E. (Kennewick, WA); Whyatt, Greg A. (West Richland, WA)

    2006-10-24

    Various aspects and applications of microsystem process networks are described. The design of many types of microsystems can be improved by ortho-cascading mass, heat, or other unit process operations. Microsystems having exergetically efficient microchannel heat exchangers are also described. Detailed descriptions of numerous design features in microcomponent systems are also provided.

  8. Mechanical Systems Signal Processing

    E-Print Network [OSTI]

    Carvalho, João B.

    , Northern Illinois University, DeKalb, IL 60115, USA c Department of Mechanical Engineering & VibrationMechanical Systems and Signal Processing Mechanical Systems and Signal Processing 21 (2007) 2715 Federal de Rio Grande do Sul, Brazil b Department of Mathematical Sciences & Vibration and Acoustic Center

  9. Elemental sulfur recovery process

    DOE Patents [OSTI]

    Flytzani-Stephanopoulos, M.; Zhicheng Hu.

    1993-09-07

    An improved catalytic reduction process for the direct recovery of elemental sulfur from various SO[sub 2]-containing industrial gas streams. The catalytic process provides combined high activity and selectivity for the reduction of SO[sub 2] to elemental sulfur product with carbon monoxide or other reducing gases. The reaction of sulfur dioxide and reducing gas takes place over certain catalyst formulations based on cerium oxide. The process is a single-stage, catalytic sulfur recovery process in conjunction with regenerators, such as those used in dry, regenerative flue gas desulfurization or other processes, involving direct reduction of the SO[sub 2] in the regenerator off gas stream to elemental sulfur in the presence of a catalyst. 4 figures.

  10. Elemental sulfur recovery process

    DOE Patents [OSTI]

    Flytzani-Stephanopoulos, Maria (Winchester, MA); Hu, Zhicheng (Somerville, MA)

    1993-01-01

    An improved catalytic reduction process for the direct recovery of elemental sulfur from various SO.sub.2 -containing industrial gas streams. The catalytic process provides combined high activity and selectivity for the reduction of SO.sub.2 to elemental sulfur product with carbon monoxide or other reducing gases. The reaction of sulfur dioxide and reducing gas takes place over certain catalyst formulations based on cerium oxide. The process is a single-stage, catalytic sulfur recovery process in conjunction with regenerators, such as those used in dry, regenerative flue gas desulfurization or other processes, involving direct reduction of the SO.sub.2 in the regenerator off gas stream to elemental sulfur in the presence of a catalyst.

  11. Formed HIP Can Processing

    SciTech Connect (OSTI)

    Clarke, Kester Diederik

    2015-07-27

    The intent of this report is to document a procedure used at LANL for HIP bonding aluminum cladding to U-10Mo fuel foils using a formed HIP can for the Domestic Reactor Conversion program in the NNSA Office of Material, Management and Minimization, and provide some details that may not have been published elsewhere. The HIP process is based on the procedures that have been used to develop the formed HIP can process, including the baseline process developed at Idaho National Laboratory (INL). The HIP bonding cladding process development is summarized in the listed references. Further iterations with Babcock & Wilcox (B&W) to refine the process to meet production and facility requirements is expected.

  12. Low-severity catalytic two-stage liquefaction process: Illinois coal conceptual commercial plant design and economics

    SciTech Connect (OSTI)

    Abrams, L.M.; Comolli, A.G.; Popper, G.A.; Wang, C.; Wilson, G.

    1988-09-01

    Hydrocarbon Research, Inc. (HRI) is conducting a program for the United States Department of Energy (DOE) to evaluate a Catalytic Two-Stage Liquefaction (CTSL) Process. This program which runs through 1987, is a continuation of an earlier DOE sponsored program (1983--1985) at HRI to develop a new technology concept for CTSL. The earlier program included bench-scale testing of improved operating conditions for the CTSL Process on Illinois No. 6 bituminous coal and Wyoming sub-bituminous coal, and engineering screening studies to identify the economic incentive for CTSL over the single-stage H-Coal/reg sign/ Process for Illinois No. 6 coal. In the current program these engineering screening studies are extended to deep-cleaned Illinois coal and use of heavy recycle. The results from this comparison will be used as a guide for future experiments with respect to selection of coal feedstocks and areas for further process optimization. A preliminary design for CTSL of Illinois deep-cleaned coal was developed based on demonstrated bench-scale performance in Run No. 227-47(I-27), and from HRI's design experience on the Breckinridge Project and H-Coal/reg sign/ Process pilot plant operations at Catlettsburg. Complete conceptual commercial plant designs were developed for a grassroots facility using HRI's Process Planning Model. Product costs were calculated and economic sensitivities analyzed. 14 refs., 11 figs., 49 tabs.

  13. Gaia Data Processing Architecture

    E-Print Network [OSTI]

    W. O'Mullane; U. Lammers; C. Bailer-Jones; U. Bastian; A. Brown; R. Drimmel; L. Eyer; C. Huc; F. Jansen; D. Katz; L. Lindegren; D. Pourbaix; X. Luri; F. Mignard; J. Torra; F. van Leeuwen

    2006-11-29

    Gaia is ESA's ambitious space astrometry mission the main objective of which is to astrometrically and spectro-photometrically map 1000 Million celestial objects (mostly in our galaxy) with unprecedented accuracy. The announcement of opportunity for the data processing will be issued by ESA late in 2006. The Gaia Data Processing and Analysis Consortium (DPAC) has been formed recently and is preparing an answer. The satellite will downlink close to 100 TB of raw telemetry data over 5 years. To achieve its required accuracy of a few 10s of Microarcsecond astrometry, a highly involved processing of this data is required. In addition to the main astrometric instrument Gaia will host a Radial Velocity instrument, two low-resolution dispersers for multi-color photometry and two Star Mappers. Gaia is a flying Giga Pixel camera. The various instruments each require relatively complex processing while at the same time being interdependent. We describe the overall composition of the DPAC and the envisaged overall architecture of the Gaia data processing system. We shall delve further into the core processing - one of the nine, so-called, coordination units comprising the Gaia processing system.

  14. Measuring Process Safety Management

    SciTech Connect (OSTI)

    Sweeney, J.C. (ARCO Chemical Co., Newtown Square, PA (United States))

    1992-04-01

    Many companies are developing and implementing Process Safety Management (PSM) systems. Various PSM models, including those by the Center for Chemical Process Safety (CCPS), the American Petroleum Institute (API), the Chemical Manufacturers Association (CMA) and OSHA have emerged to guide the design, development and installation of these systems. These models represent distillations of the practices, methods and procedures successfully used by those who believed that a strong correlation exists between sound PSM practices and achieving reductions in the frequency and severity of process incidents. This paper describes the progress of CCPS research toward developing a PSM performance measurement model. It also provides a vision for future CCPS research to define effectiveness indices.

  15. Municipal waste processing apparatus

    DOE Patents [OSTI]

    Mayberry, J.L.

    1988-04-13

    This invention relates to apparatus for processing municipal waste, and more particularly to vibrating mesh screen conveyor systems for removing grit, glass, and other noncombustible materials from dry municipal waste. Municipal waste must be properly processed and disposed of so that it does not create health risks to the community. Generally, municipal waste, which may be collected in garbage trucks, dumpsters, or the like, is deposited in processing areas such as landfills. Land and environmental controls imposed on landfill operators by governmental bodies have increased in recent years, however, making landfill disposal of solid waste materials more expensive. 6 figs.

  16. Ultrasonic Processing of Materials

    SciTech Connect (OSTI)

    Meek, Thomas T.; Han, Qingyou; Jian, Xiaogang; Xu, Hanbing

    2005-06-30

    The purpose of this project was to determine the impact of a new breakthrough technology, ultrasonic processing, on various industries, including steel, aluminum, metal casting, and forging. The specific goals of the project were to evaluate core principles and establish quantitative bases for the ultrasonc processing of materials, and to demonstrate key applications in the areas of grain refinement of alloys during solidification and degassing of alloy melts. This study focussed on two classes of materials - aluminum alloys and steels - and demonstrated the application of ultrasonic processing during ingot casting.

  17. Coal liquefaction quenching process

    DOE Patents [OSTI]

    Thorogood, Robert M. (Macungie, PA); Yeh, Chung-Liang (Bethlehem, PA); Donath, Ernest E. (St. Croix, VI)

    1983-01-01

    There is described an improved coal liquefaction quenching process which prevents the formation of coke with a minimum reduction of thermal efficiency of the coal liquefaction process. In the process, the rapid cooling of the liquid/solid products of the coal liquefaction reaction is performed without the cooling of the associated vapor stream to thereby prevent formation of coke and the occurrence of retrograde reactions. The rapid cooling is achieved by recycling a subcooled portion of the liquid/solid mixture to the lower section of a phase separator that separates the vapor from the liquid/solid products leaving the coal reactor.

  18. The Process Specification

    E-Print Network [OSTI]

    Menzel, Christopher

    on the ontology. Asthe use of information technology in manufacturing operations has matured, A Xthe need- ing, process planning, production planning, simulation, project management, work flow, and business planning, production planning, simu- lation, project management, work flow, and business

  19. Associative list processing unit

    DOE Patents [OSTI]

    Hemmert, Karl Scott; Underwood, Keith D

    2014-04-01

    An associative list processing unit and method comprising employing a plurality of prioritized cell blocks and permitting inserts to occur in a single clock cycle if all of the cell blocks are not full.

  20. Hydrocracking catalysts and processes

    SciTech Connect (OSTI)

    Dolbear, G.E. [G.E. Dolbear and Associates, Diamond Bar, CA (United States)

    1995-12-31

    Hydrocracking processes convert aromatic gas oils into high quality gasoline, diesel, and turbine stocks. They operate at high hydrogen pressures, typically greater than 1500 psig. Operating temperatures range from 600-700{degrees}F (315-382{degrees}C). Commercial catalysts vary in activity and selectivity, allowing process designers to emphasize middle distillates, naphtha, or both. Catalysts are quite stable in use, with two year unit run lengths typical. A pretreatment step to remove nitrogen compounds is usually part of the same process unit. These HDN units operate integrally with the hydrocracking. The hydrogenation reactions are strongly exothermic, while the cracking is roughly thermal neutral. This combination can lead to temperature runaways. To avoid this, cold hydrogen is injected at several points in hydrocracking reactors. The mechanics of mixing this hydrogen with the oil and redistributing the mixture over the catalyst bed are very important in controlling process operation and ensuring long catalyst life.

  1. Sculpture as process

    E-Print Network [OSTI]

    Kracke, Bernd

    1981-01-01

    Sculpture as process is rooted in the historical development of movement as a theme of art in general and of sculpture in particular since 1900. The impact of the industrial revolution and the subsequent scientific/technological ...

  2. Continuous sulfur removal process

    DOE Patents [OSTI]

    Jalan, V.; Ryu, J.

    1994-04-26

    A continuous process for the removal of hydrogen sulfide from a gas stream using a membrane comprising a metal oxide deposited on a porous support is disclosed. 4 figures.

  3. Direct coal liquefaction process

    DOE Patents [OSTI]

    Rindt, J.R.; Hetland, M.D.

    1993-10-26

    An improved multistep liquefaction process for organic carbonaceous mater which produces a virtually completely solvent-soluble carbonaceous liquid product. The solubilized product may be more amenable to further processing than liquid products produced by current methods. In the initial processing step, the finely divided organic carbonaceous material is treated with a hydrocarbonaceous pasting solvent containing from 10% and 100% by weight process-derived phenolic species at a temperature within the range of 300 C to 400 C for typically from 2 minutes to 120 minutes in the presence of a carbon monoxide reductant and an optional hydrogen sulfide reaction promoter in an amount ranging from 0 to 10% by weight of the moisture- and ash-free organic carbonaceous material fed to the system. As a result, hydrogen is generated via the water/gas shift reaction at a rate necessary to prevent condensation reactions. In a second step, the reaction product of the first step is hydrogenated.

  4. Direct coal liquefaction process

    DOE Patents [OSTI]

    Rindt, John R. (Grand Forks, ND); Hetland, Melanie D. (Grand Forks, ND)

    1993-01-01

    An improved multistep liquefaction process for organic carbonaceous mater which produces a virtually completely solvent-soluble carbonaceous liquid product. The solubilized product may be more amenable to further processing than liquid products produced by current methods. In the initial processing step, the finely divided organic carbonaceous material is treated with a hydrocarbonaceous pasting solvent containing from 10% and 100% by weight process-derived phenolic species at a temperature within the range of 300.degree. C. to 400.degree. C. for typically from 2 minutes to 120 minutes in the presence of a carbon monoxide reductant and an optional hydrogen sulfide reaction promoter in an amount ranging from 0 to 10% by weight of the moisture- and ash-free organic carbonaceous material fed to the system. As a result, hydrogen is generated via the water/gas shift reaction at a rate necessary to prevent condensation reactions. In a second step, the reaction product of the first step is hydrogenated.

  5. Commissioning : The Total Process 

    E-Print Network [OSTI]

    Kettler, G. J.

    1998-01-01

    of the building design, ensure that the building is constructed in accordance with the contract documents, and verify that the building and its systems function according to the design intent documents. The process helps to integrate and organize the design...

  6. Advanced Polymer Processing Facility

    SciTech Connect (OSTI)

    Muenchausen, Ross E.

    2012-07-25

    Some conclusions of this presentation are: (1) Radiation-assisted nanotechnology applications will continue to grow; (2) The APPF will provide a unique focus for radiolytic processing of nanomaterials in support of DOE-DP, other DOE and advanced manufacturing initiatives; (3) {gamma}, X-ray, e-beam and ion beam processing will increasingly be applied for 'green' manufacturing of nanomaterials and nanocomposites; and (4) Biomedical science and engineering may ultimately be the biggest application area for radiation-assisted nanotechnology development.

  7. Hydrogen recovery process

    DOE Patents [OSTI]

    Baker, Richard W. (Palo Alto, CA); Lokhandwala, Kaaeid A. (Union City, CA); He, Zhenjie (Fremont, CA); Pinnau, Ingo (Palo Alto, CA)

    2000-01-01

    A treatment process for a hydrogen-containing off-gas stream from a refinery, petrochemical plant or the like. The process includes three separation steps: condensation, membrane separation and hydrocarbon fraction separation. The membrane separation step is characterized in that it is carried out under conditions at which the membrane exhibits a selectivity in favor of methane over hydrogen of at least about 2.5.

  8. Coal liquefaction process

    DOE Patents [OSTI]

    Skinner, Ronald W. (Allentown, PA); Tao, John C. (Perkiomenville, PA); Znaimer, Samuel (Vancouver, CA)

    1985-01-01

    This invention relates to an improved process for the production of liquid carbonaceous fuels and solvents from carbonaceous solid fuels, especially coal. The claimed improved process includes the hydrocracking of the light SRC mixed with a suitable hydrocracker solvent. The recycle of the resulting hydrocracked product, after separation and distillation, is used to produce a solvent for the hydrocracking of the light solvent refined coal.

  9. Spherical nitroguanidine process

    DOE Patents [OSTI]

    Sanchez, John A. (Los Alamos, NM); Roemer, Edward L. (Los Alamos, NM); Stretz, Lawrence A. (Los Alamos, NM)

    1990-01-01

    A process of preparing spherical high bulk density nitroguanidine by dissing low bulk density nitroguanidine in N-methyl pyrrolidone at elevated temperatures and then cooling the solution to lower temperatures as a liquid characterized as a nonsolvent for the nitroguanidine is provided. The process is enhanced by inclusion in the solution of from about 1 ppm up to about 250 ppm of a metal salt such as nickel nitrate, zinc nitrate or chromium nitrate, preferably from about 20 to about 50 ppm.

  10. Polycrystalline semiconductor processing

    DOE Patents [OSTI]

    Glaeser, Andreas M. (Scituate, MA); Haggerty, John S. (Lincoln, MA); Danforth, Stephen C. (Winchester, MA)

    1983-01-01

    A process for forming large-grain polycrystalline films from amorphous films for use as photovoltaic devices. The process operates on the amorphous film and uses the driving force inherent to the transition from the amorphous state to the crystalline state as the force which drives the grain growth process. The resultant polycrystalline film is characterized by a grain size that is greater than the thickness of the film. A thin amorphous film is deposited on a substrate. The formation of a plurality of crystalline embryos is induced in the amorphous film at predetermined spaced apart locations and nucleation is inhibited elsewhere in the film. The crystalline embryos are caused to grow in the amorphous film, without further nucleation occurring in the film, until the growth of the embryos is halted by imgingement on adjacently growing embryos. The process is applicable to both batch and continuous processing techniques. In either type of process, the thin amorphous film is sequentially doped with p and n type dopants. Doping is effected either before or after the formation and growth of the crystalline embryos in the amorphous film, or during a continuously proceeding crystallization step.

  11. Polycrystalline semiconductor processing

    DOE Patents [OSTI]

    Glaeser, A.M.; Haggerty, J.S.; Danforth, S.C.

    1983-04-05

    A process is described for forming large-grain polycrystalline films from amorphous films for use as photovoltaic devices. The process operates on the amorphous film and uses the driving force inherent to the transition from the amorphous state to the crystalline state as the force which drives the grain growth process. The resultant polycrystalline film is characterized by a grain size that is greater than the thickness of the film. A thin amorphous film is deposited on a substrate. The formation of a plurality of crystalline embryos is induced in the amorphous film at predetermined spaced apart locations and nucleation is inhibited elsewhere in the film. The crystalline embryos are caused to grow in the amorphous film, without further nucleation occurring in the film, until the growth of the embryos is halted by impingement on adjacently growing embryos. The process is applicable to both batch and continuous processing techniques. In either type of process, the thin amorphous film is sequentially doped with p and n type dopants. Doping is effected either before or after the formation and growth of the crystalline embryos in the amorphous film, or during a continuously proceeding crystallization step. 10 figs.

  12. Helium process cycle

    DOE Patents [OSTI]

    Ganni, Venkatarao (Yorktown, VA)

    2008-08-12

    A unique process cycle and apparatus design separates the consumer (cryogenic) load return flow from most of the recycle return flow of a refrigerator and/or liquefier process cycle. The refrigerator and/or liquefier process recycle return flow is recompressed by a multi-stage compressor set and the consumer load return flow is recompressed by an independent consumer load compressor set that maintains a desirable constant suction pressure using a consumer load bypass control valve and the consumer load return pressure control valve that controls the consumer load compressor's suction pressure. The discharge pressure of this consumer load compressor is thereby allowed to float at the intermediate pressure in between the first and second stage recycle compressor sets. Utilizing the unique gas management valve regulation, the unique process cycle and apparatus design in which the consumer load return flow is separate from the recycle return flow, the pressure ratios of each recycle compressor stage and all main pressures associated with the recycle return flow are allowed to vary naturally, thus providing a naturally regulated and balanced floating pressure process cycle that maintains optimal efficiency at design and off-design process cycle capacity and conditions automatically.

  13. Helium process cycle

    DOE Patents [OSTI]

    Ganni, Venkatarao (Yorktown, VA)

    2007-10-09

    A unique process cycle and apparatus design separates the consumer (cryogenic) load return flow from most of the recycle return flow of a refrigerator and/or liquefier process cycle. The refrigerator and/or liquefier process recycle return flow is recompressed by a multi-stage compressor set and the consumer load return flow is recompressed by an independent consumer load compressor set that maintains a desirable constant suction pressure using a consumer load bypass control valve and the consumer load return pressure control valve that controls the consumer load compressor's suction pressure. The discharge pressure of this consumer load compressor is thereby allowed to float at the intermediate pressure in between the first and second stage recycle compressor sets. Utilizing the unique gas management valve regulation, the unique process cycle and apparatus design in which the consumer load return flow is separate from the recycle return flow, the pressure ratios of each recycle compressor stage and all main pressures associated with the recycle return flow are allowed to vary naturally, thus providing a naturally regulated and balanced floating pressure process cycle that maintains optimal efficiency at design and off-design process cycle capacity and conditions automatically.

  14. 15th Workshop on Crystalline Silicon Solar Cells and Modules: Materials and Processes; Extended Abstracts and Papers

    SciTech Connect (OSTI)

    Sopori, B. L.

    2005-11-01

    The National Center for Photovoltaics sponsored the 15th Workshop on Crystalline Silicon Solar Cells & Modules: Materials and Processes, held in Vail, CO, August 7-10, 2005. This meeting provided a forum for an informal exchange of technical and scientific information between international researchers in the photovoltaic and relevant non-photovoltaic fields. The workshop addressed the fundamental properties of PV silicon, new solar cell designs, and advanced solar cell processing techniques. A combination of oral presentations by invited speakers, poster sessions, and discussion sessions reviewed recent advances in crystal growth, new cell designs, new processes and process characterization techniques, and cell fabrication approaches suitable for future manufacturing demands. The theme of this year's meeting was 'Providing the Scientific Basis for Industrial Success.' Specific sessions during the workshop included: Advances in crystal growth and material issues; Impurities and defects in Si; Advanced processing; High-efficiency Si solar cells; Thin Si solar cells; and Cell design for efficiency and reliability module operation. The topic for the Rump Session was ''Si Feedstock: The Show Stopper'' and featured a panel discussion by representatives from various PV companies.

  15. NEPTUNIUM OXIDE PROCESSING

    SciTech Connect (OSTI)

    Jordan, J; Watkins, R; Hensel, S

    2009-05-27

    The Savannah River Site's HB-Line Facility completed a campaign in which fifty nine cans of neptunium oxide were produced and shipped to the Idaho National Laboratory in the 9975 shipping container. The neptunium campaign was divided into two parts: Part 1 which consisted of oxide made from H-Canyon neptunium solution which did not require any processing prior to conversion into an oxide, and Part 2 which consisted of oxide made from additional H-Canyon neptunium solutions which required processing to purify the solution prior to conversion into an oxide. The neptunium was received as a nitrate solution and converted to oxide through ion-exchange column extraction, precipitation, and calcination. Numerous processing challenges were encountered in order make a final neptunium oxide product that could be shipped in a 9975 shipping container. Among the challenges overcome was the issue of scale: translating lab scale production into full facility production. The balance between processing efficiency and product quality assurance was addressed during this campaign. Lessons learned from these challenges are applicable to other processing projects.

  16. Monitoring of thermal enhanced oil recovery processes with electromagnetic methods

    SciTech Connect (OSTI)

    Wilt, M.

    1992-09-01

    Research in applying electromagnetic methods for imaging thermal enhanced oil recovery has progressed significantly during the past eighteen months. Working together with researchers at Lawrence Berkeley Laboratory (LBL) and supported by a group of industrial sponsors we have focused our effort on field system development and doing field surveys connected with EOR operations. Field surveys were recently completed at the Lost Hills No.3 oil field and at UC Richmond Field station. At Lost Hills, crosshole EM data sets were collected before a new phase of steam injection for EOR and again four months after the onset of steaming. The two data sets were nearly identical suggesting that very little steam had been injected into this borehole. This is in accord with the operators records which indicate injectivity problems with this particular well. At Richmond we conducted a salt water injection monitoring experiment where 50,000 gallons of salt water were injected in a shallow aquifer and crosshole EM data were collected using the injection well and several observation wells. We applied the imaging code to some of the collected data and produced an image showing that the salt water slug has propagated 8--10 m from the injector into the aquifer. This result is partially confirmed by prior calculations and well logging data. Applying the EM methods to the problem of oil field characterization essentially means extending the borehole resistivity log into the region between wells. Since the resistivity of a sedimentary environment is often directly dependent on the fluids in the rock the knowledge of the resistivity distribution within an oil field can be invaluable for finding missed or bypassed oil or for mapping the overall structure. With small modification the same methods used for mapping EOR process can be readily applied to determining the insitu resistivity structure.

  17. Quartz resonator processing system

    DOE Patents [OSTI]

    Peters, Roswell D. M. (Rustburg, VA)

    1983-01-01

    Disclosed is a single chamber ultra-high vacuum processing system for the oduction of hermetically sealed quartz resonators wherein electrode metallization and sealing are carried out along with cleaning and bake-out without any air exposure between the processing steps. The system includes a common vacuum chamber in which is located a rotatable wheel-like member which is adapted to move a plurality of individual component sets of a flat pack resonator unit past discretely located processing stations in said chamber whereupon electrode deposition takes place followed by the placement of ceramic covers over a frame containing a resonator element and then to a sealing stage where a pair of hydraulic rams including heating elements effect a metallized bonding of the covers to the frame.

  18. Cantilever epitaxial process

    DOE Patents [OSTI]

    Ashby, Carol I.; Follstaedt, David M.; Mitchell, Christine C.; Han, Jung

    2003-07-29

    A process of growing a material on a substrate, particularly growing a Group II-VI or Group III-V material, by a vapor-phase growth technique where the growth process eliminates the need for utilization of a mask or removal of the substrate from the reactor at any time during the processing. A nucleation layer is first grown upon which a middle layer is grown to provide surfaces for subsequent lateral cantilever growth. The lateral growth rate is controlled by altering the reactor temperature, pressure, reactant concentrations or reactant flow rates. Semiconductor materials, such as GaN, can be produced with dislocation densities less than 10.sup.7 /cm.sup.2.

  19. Powder treatment process

    DOE Patents [OSTI]

    Weyand, J.D.

    1988-02-09

    Disclosed are: (1) a process comprising spray drying a powder-containing slurry, the slurry containing a powder constituent susceptible of oxidizing under the temperature conditions of the spray drying, while reducing the tendency for oxidation of the constituent by including as a liquid constituent of the slurry an organic liquid; (2) a process comprising spray drying a powder-containing slurry, the powder having been pretreated to reduce content of a powder constituent susceptible of oxidizing under the temperature conditions of the spray drying, the pretreating comprising heating the powder to react the constituent; and (3) a process comprising reacting ceramic powder, grinding the reacted powder, slurrying the ground powder, spray drying the slurried powder, and blending the dried powder with metal powder. 2 figs.

  20. Levy processes and continuous-state branching processes: part I

    E-Print Network [OSTI]

    L´evy processes and continuous-state branching processes: part I Andreas E. Kyprianou, Department motion has continuous paths whereas a Poisson process does not. Secondly, a Poisson process is a non another, we see that they also have a lot in common. Both processes have right continuous paths with left

  1. Actinide metal processing

    DOE Patents [OSTI]

    Sauer, N.N.; Watkin, J.G.

    1992-03-24

    A process for converting an actinide metal such as thorium, uranium, or plutonium to an actinide oxide material by admixing the actinide metal in an aqueous medium with a hypochlorite as an oxidizing agent for sufficient time to form the actinide oxide material and recovering the actinide oxide material is described together with a low temperature process for preparing an actinide oxide nitrate such as uranyl nitrate. Additionally, a composition of matter comprising the reaction product of uranium metal and sodium hypochlorite is provided, the reaction product being an essentially insoluble uranium oxide material suitable for disposal or long term storage.

  2. Actinide metal processing

    DOE Patents [OSTI]

    Sauer, Nancy N. (Los Alamos, NM); Watkin, John G. (Los Alamos, NM)

    1992-01-01

    A process of converting an actinide metal such as thorium, uranium, or plnium to an actinide oxide material by admixing the actinide metal in an aqueous medium with a hypochlorite as an oxidizing agent for sufficient time to form the actinide oxide material and recovering the actinide oxide material is provided together with a low temperature process of preparing an actinide oxide nitrate such as uranyl nitrte. Additionally, a composition of matter comprising the reaction product of uranium metal and sodium hypochlorite is provided, the reaction product being an essentially insoluble uranium oxide material suitable for disposal or long term storage.

  3. Coking and gasification process

    DOE Patents [OSTI]

    Billimoria, Rustom M. (Houston, TX); Tao, Frank F. (Baytown, TX)

    1986-01-01

    An improved coking process for normally solid carbonaceous materials wherein the yield of liquid product from the coker is increased by adding ammonia or an ammonia precursor to the coker. The invention is particularly useful in a process wherein coal liquefaction bottoms are coked to produce both a liquid and a gaseous product. Broadly, ammonia or an ammonia precursor is added to the coker ranging from about 1 to about 60 weight percent based on normally solid carbonaceous material and is preferably added in an amount from about 2 to about 15 weight percent.

  4. Reversible brazing process

    DOE Patents [OSTI]

    Pierce, Jim D. (Albuquerque, NM); Stephens, John J. (Albuquerque, NM); Walker, Charles A. (Albuquerque, NM)

    1999-01-01

    A method of reversibly brazing surfaces together. An interface is affixed to each surface. The interfaces can be affixed by processes such as mechanical joining, welding, or brazing. The two interfaces are then brazed together using a brazing process that does not defeat the surface to interface joint. Interfaces of materials such as Ni-200 can be affixed to metallic surfaces by welding or by brazing with a first braze alloy. The Ni-200 interfaces can then be brazed together using a second braze alloy. The second braze alloy can be chosen so that it minimally alters the properties of the interfaces to allow multiple braze, heat and disassemble, rebraze cycles.

  5. Solar industrial process heat

    SciTech Connect (OSTI)

    Lumsdaine, E.

    1981-04-01

    The aim of the assessment reported is to candidly examine the contribution that solar industrial process heat (SIPH) is realistically able to make in the near and long-term energy futures of the United States. The performance history of government and privately funded SIPH demonstration programs, 15 of which are briefly summarized, and the present status of SIPH technology are discussed. The technical and performance characteristics of solar industrial process heat plants and equipment are reviewed, as well as evaluating how the operating experience of over a dozen SIPH demonstration projects is influencing institutional acceptance and economoc projections. Implications for domestic energy policy and international implications are briefly discussed. (LEW)

  6. Plasma Processing Of Hydrocarbon

    SciTech Connect (OSTI)

    Grandy, Jon D; Peter C. Kong; Brent A. Detering; Larry D. Zuck

    2007-05-01

    The Idaho National Laboratory (INL) developed several patented plasma technologies for hydrocarbon processing. The INL patents include nonthermal and thermal plasma technologies for direct natural gas to liquid conversion, upgrading low value heavy oil to synthetic light crude, and to convert refinery bottom heavy streams directly to transportation fuel products. Proof of concepts has been demonstrated with bench scale plasma processes and systems to convert heavy and light hydrocarbons to higher market value products. This paper provides an overview of three selected INL patented plasma technologies for hydrocarbon conversion or upgrade.

  7. Biomass Processing Photolibrary

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Research related to bioenergy is a major focus in the U.S. as science agencies, universities, and commercial labs seek to create new energy-efficient fuels. The Biomass Processing Project is one of the funded projects of the joint USDA-DOE Biomass Research and Development Initiative. The Biomass Processing Photolibrary has numerous images, but there are no accompanying abstracts to explain what you are seeing. The project website, however, makes available the full text of presentations and publications and also includes an exhaustive biomass glossary that is being developed into an ASAE Standard.

  8. Cyclic membrane separation process

    DOE Patents [OSTI]

    Nemser, Stuart M.

    2005-05-03

    A cyclic process for controlling environmental emissions of volatile organic compounds (VOC) from vapor recovery in storage and dispensing operations of liquids maintains a vacuum in the storage tank ullage. In the first part of a two-part cyclic process ullage vapor is discharged through a vapor recovery system in which VOC are stripped from vented gas with a selectively gas permeable membrane. In the second part, the membrane is inoperative while gas pressure rises in the ullage. In one aspect of this invention, a vacuum is drawn in the membrane separation unit thus reducing overall VOC emissions.

  9. Cyclic membrane separation process

    DOE Patents [OSTI]

    Bowser, John

    2004-04-13

    A cyclic process for controlling environmental emissions of volatile organic compounds (VOC) from vapor recovery in storage and dispensing operations of liquids maintains a vacuum in the storage tank ullage. In one of a two-part cyclic process ullage vapor is discharged through a vapor recovery system in which VOC are stripped from vented gas with a selectively gas permeable membrane. In the other part, the membrane is inoperative while gas pressure rises in the ullage. Ambient air is charged to the membrane separation unit during the latter part of the cycle.

  10. 4/18/11 10:39 AMB.C. aspires to lead the country in research and development Page 1 of 6http://www.canada.com/story_print.html?id=713de69a-38b7-48a8-9d50-d96d0aa1142b&sponsor=

    E-Print Network [OSTI]

    4/18/11 10:39 AMB.C. aspires to lead the country in research and development Page 1 of 6http://www.canada.com/story_print.html?id=713de69a-38b7-48a8-9d50-d96d0aa1142b&sponsor= B.C. aspires to lead the country in research for economy, innovation and education" by 2010. #12;4/18/11 10:39 AMB.C. aspires to lead the country

  11. Sulfur recovery process

    SciTech Connect (OSTI)

    Hise, R.E.; Cook, W.J.

    1991-06-04

    This paper describes a method for recovering sulfur from a process feed stream mixture of gases comprising sulfur-containing compounds including hydrogen sulfide using the Claus reaction to convert sulfur-containing compounds to elemental sulfur and crystallization to separate sulfur-containing compounds from a tail gas of the Claus reaction for further processing as a recycle stream. It comprises: providing a Claus feed stream containing a stoichiometric excess of hydrogen sulfide, the Claus feed stream including the process feed stream and the recycles stream; introducing the Claus feed stream and an oxidizing agent into a sulfur recovery unit for converting sulfur-containing compounds in the Claus feed stream to elemental sulfur; withdrawing the tail gas from the sulfur recovery unit; separating water from the tail gas to producing a dehydrated tail gas; separating sulfur-containing compounds including carbonyl sulfide from the dehydrated tail gas as an excluded material by crystallization and withdrawing an excluded material-enriched output from the crystallization to produce the recycle stream; and combining the recycle stream with the process feed stream to produce the Claus feed stream.

  12. DELIBERATIVE AND INCLUSIONARY PROCESSES

    E-Print Network [OSTI]

    Bateman, Ian J.

    and Social Research Council (ESRC). The editors warmly acknowledge the financial support of the ESRC in the second seminar, held in Norwich in July 1999. Deliberative and inclusionary processes (DIPs) cover a wide range of procedures and practices. These are all designed to widen the basis of direct participation

  13. Catalytic cracking process

    SciTech Connect (OSTI)

    Lokhandwala, Kaaeid A.; Baker, Richard W.

    2001-01-01

    Processes and apparatus for providing improved catalytic cracking, specifically improved recovery of olefins, LPG or hydrogen from catalytic crackers. The improvement is achieved by passing part of the wet gas stream across membranes selective in favor of light hydrocarbons over hydrogen.

  14. Hydrocarbon hydrocracking process

    SciTech Connect (OSTI)

    Staubs, D.W.; Tunison, M.E.; Winter, W.E.

    1983-01-11

    A hydrocracking process is provided in which the heavy bottoms fraction recovered from the hydrocracked product is heat treated prior to being recycled to the hydrocracking zone. The resulting hydrocracked product has an increased amount of constituents boiling in the middle distillate range.

  15. Process Metallurgy Course Outline

    E-Print Network [OSTI]

    New South Wales, University of

    ................................................................................................... 7 Course Objective To develop an understanding of principles of metallurgical processes, reactor-mixed reactors. Tracer additions. Chemical performance of a metallurgical reactor. Principles of metallurgical of metallurgical reactors, batch and continuous, plug flow and well-mixed ideal reactors. Tracer additions. 4 6

  16. Pervaporation process and assembly

    DOE Patents [OSTI]

    Wynn, Nicholas P. (Redwood City, CA); Huang, Yu (Palo Alto, CA); Aldajani, Tiem (San Jose, CA); Fulton, Donald A. (Fairfield, CA)

    2010-07-20

    The invention is a pervaporation process and pervaporation equipment, using a series of membrane modules, and including inter-module reheating of the feed solution under treatment. The inter-module heating is achieved within the tube or vessel in which the modules are housed, thereby avoiding the need to repeatedly extract the feed solution from the membrane module train.

  17. Coal liquefaction process

    DOE Patents [OSTI]

    Carr, Norman L. (Allison Park, PA); Moon, William G. (Cheswick, PA); Prudich, Michael E. (Pittsburgh, PA)

    1983-01-01

    A C.sub.5 -900.degree. F. (C.sub.5 -482.degree. C.) liquid yield greater than 50 weight percent MAF feed coal is obtained in a coal liquefaction process wherein a selected combination of higher hydrogen partial pressure, longer slurry residence time and increased recycle ash content of the feed slurry are controlled within defined ranges.

  18. Software Quality, Software Process,

    E-Print Network [OSTI]

    Hamlet, Richard

    Software Quality, Software Process, and Software Testing Dick Hamlet Portland State University Department of Computer Science Center for Software Quality Research PO Box 751 Portland, OR 97207 Internet. However, unless testing goals are clearly related to true measurements of software quality, the testing

  19. From Signal Information Processing

    E-Print Network [OSTI]

    From Signal to Information Processing Don H. Johnson Computer and Information Technology Institute of signals o Here, all signals are assumed to be stochastic information source information encoder Information extraction systems--determining a from X(a)--fall into two categories h Classification: Which

  20. Actinide recovery process

    DOE Patents [OSTI]

    Muscatello, Anthony C. (Arvada, CO); Navratil, James D. (Arvada, CO); Saba, Mark T. (Arvada, CO)

    1987-07-28

    Process for the removal of plutonium polymer and ionic actinides from aqueous solutions by absorption onto a solid extractant loaded on a solid inert support such as polystyrenedivinylbenzene. The absorbed actinides can then be recovered by incineration, by stripping with organic solvents, or by acid digestion. Preferred solid extractants are trioctylphosphine oxide and octylphenyl-N,N-diisobutylcarbamoylmethylphosphine oxide and the like.

  1. HYDROLOGICAL PROCESSES INVITED COMMENTARY

    E-Print Network [OSTI]

    McDonnell, Jeffrey J.

    in the past 30 years, the basic concepts have changed only slightly. More detailed process representations after the last such USA-Japan hydrology seminar (see details in McDonnell et al., this issue is grounded in engineering and now motivated by explaining Copyright 2001 John Wiley & Sons, Ltd. 2053 #12;J

  2. Catalytic oxidative dehydrogenation process

    DOE Patents [OSTI]

    Schmidt, Lanny D. (Minneapolis, MN); Huff, Marylin (St. Paul, MN)

    2002-01-01

    A process for the production of a mono-olefin from a gaseous paraffinic hydrocarbon having at least two carbon atoms or mixtures thereof comprising reacting said hydrocarbons and molecular oxygen in the presence of a platinum catalyst. The catalyst consist essentially of platinum supported on alumina or zirconia monolith, preferably zirconia and more preferably in the absence of palladium, rhodium and gold.

  3. Process for functionalizing alkanes

    DOE Patents [OSTI]

    Bergman, R.G.; Janowicz, A.H.; Periana, R.A.

    1988-05-24

    Process for functionalizing saturated hydrocarbons comprises: (a) reacting said saturated hydrocarbons of the formula: R[sub 1]H wherein H represents a hydrogen atom; and R[sub 1] represents a saturated hydrocarbon radical, with a metal complex of the formula: CpRh[P(R[sub 2])[sub 3

  4. Parastillation Process in Operations 

    E-Print Network [OSTI]

    Canfield, F.; Jenkins, O.

    1986-01-01

    The Parastillation process is a new method for multi-stage, counter-current contact between vapor and liquid that results in 33% more ideal stages than distillation for a given tray spacing. Patents have been granted in the U.S.A., U.K., Europe...

  5. Gaia Data Processing Architecture

    E-Print Network [OSTI]

    O'Mullane, W; Bailer-Jones, C; Bastian, U; Brown, A; Drimmel, R; Eyer, L; Huc, C; Jansen, F; Katz, D; Lindegren, L; Pourbaix, D; Luri, X; Mignard, F; Torra, J; van Leeuwen, F

    2006-01-01

    Gaia is ESA's ambitious space astrometry mission the main objective of which is to astrometrically and spectro-photometrically map 1000 Million celestial objects (mostly in our galaxy) with unprecedented accuracy. The announcement of opportunity for the data processing will be issued by ESA late in 2006. The Gaia Data Processing and Analysis Consortium (DPAC) has been formed recently and is preparing an answer. The satellite will downlink close to 100 TB of raw telemetry data over 5 years. To achieve its required accuracy of a few 10s of Microarcsecond astrometry, a highly involved processing of this data is required. In addition to the main astrometric instrument Gaia will host a Radial Velocity instrument, two low-resolution dispersers for multi-color photometry and two Star Mappers. Gaia is a flying Giga Pixel camera. The various instruments each require relatively complex processing while at the same time being interdependent. We describe the overall composition of the DPAC and the envisaged overall archi...

  6. Process window and variation characterization of the micro embossing process

    E-Print Network [OSTI]

    Wang, Qi, S.M. Massachusetts Institute of Technology

    2006-01-01

    The micro embossing process on polymethylmethacrylate (PMMA) is demonstrated experimentally to be a useful process to produce micro fluidic and optical devices. Because this process is a one step thermoplastic deformation ...

  7. Biosphere Process Model Report

    SciTech Connect (OSTI)

    J. Schmitt

    2000-05-25

    To evaluate the postclosure performance of a potential monitored geologic repository at Yucca Mountain, a Total System Performance Assessment (TSPA) will be conducted. Nine Process Model Reports (PMRs), including this document, are being developed to summarize the technical basis for each of the process models supporting the TSPA model. These reports cover the following areas: (1) Integrated Site Model; (2) Unsaturated Zone Flow and Transport; (3) Near Field Environment; (4) Engineered Barrier System Degradation, Flow, and Transport; (5) Waste Package Degradation; (6) Waste Form Degradation; (7) Saturated Zone Flow and Transport; (8) Biosphere; and (9) Disruptive Events. Analysis/Model Reports (AMRs) contain the more detailed technical information used to support TSPA and the PMRs. The AMRs consists of data, analyses, models, software, and supporting documentation that will be used to defend the applicability of each process model for evaluating the postclosure performance of the potential Yucca Mountain repository system. This documentation will ensure the traceability of information from its source through its ultimate use in the TSPA-Site Recommendation (SR) and in the National Environmental Policy Act (NEPA) analysis processes. The objective of the Biosphere PMR is to summarize (1) the development of the biosphere model, and (2) the Biosphere Dose Conversion Factors (BDCFs) developed for use in TSPA. The Biosphere PMR does not present or summarize estimates of potential radiation doses to human receptors. Dose calculations are performed as part of TSPA and will be presented in the TSPA documentation. The biosphere model is a component of the process to evaluate postclosure repository performance and regulatory compliance for a potential monitored geologic repository at Yucca Mountain, Nevada. The biosphere model describes those exposure pathways in the biosphere by which radionuclides released from a potential repository could reach a human receptor. Collectively, the potential human receptor and exposure pathways form the biosphere model. More detailed technical information and data about potential human receptor groups and the characteristics of exposure pathways have been developed in a series of AMRs and Calculation Reports.

  8. PRODUCTION OF FOAMS, FIBERS AND PITCHES USING A COAL EXTRACTION PROCESS

    SciTech Connect (OSTI)

    Chong Chen; Elliot B. Kennel; Liviu Magean; Pete G. Stansberry; Alfred H. Stiller; John W. Zondlo

    2004-06-20

    This Department of Energy National Energy Technology Laboratory sponsored project developed processes for converting coal feedstocks to carbon products, including coal-derived pitch, coke foams and fibers based on solvent extraction processes. A key technology is the use of hydrogenation accomplished at elevated temperatures and pressures to obtain a synthetic coal pitch. Hydrogenation, or partial direct liquefaction of coal, is used to modify the properties of raw coal such that a molten synthetic pitch can be obtained. The amount of hydrogen required to produce a synthetic pitch is about an order of magnitude less than the amount required to produce synthetic crude oil. Hence the conditions for synthetic pitch production consume very little hydrogen and can be accomplished at substantially lower pressure. In the molten state, hot filtration or centrifugation can be used to separate dissolved coal chemicals from mineral matter and insolubles (inertinite), resulting in the production of a purified hydrocarbon pitch. Alternatively, if hydrogenation is not used, aromatic hydrocarbon liquids appropriate for use as precursors to carbon products can obtained by dissolving coal in a solvent. As in the case for partial direct liquefaction pitches, undissolved coal is removed via hot filtration or centrifugation. Excess solvent is boiled off and recovered. The resultant solid material, referred to as Solvent Extracted Carbon Ore or SECO, has been used successfully to produce artificial graphite and carbon foam.

  9. Advanced Process Management and Implementation 

    E-Print Network [OSTI]

    Robinson, J.

    1999-01-01

    Advanced Process Management is a method to achieve optimum process performance during the life cycle of a plant through proper design, effective automation, and adequate operator decision support. Developing a quality process model is an effective...

  10. Dynamic control of remelting processes

    DOE Patents [OSTI]

    Bertram, Lee A. (Dublin, CA); Williamson, Rodney L. (Albuquerque, NM); Melgaard, David K. (Albuquerque, NM); Beaman, Joseph J. (Austin, TX); Evans, David G. (Clinton, NY)

    2000-01-01

    An apparatus and method of controlling a remelting process by providing measured process variable values to a process controller; estimating process variable values using a process model of a remelting process; and outputting estimated process variable values from the process controller. Feedback and feedforward control devices receive the estimated process variable values and adjust inputs to the remelting process. Electrode weight, electrode mass, electrode gap, process current, process voltage, electrode position, electrode temperature, electrode thermal boundary layer thickness, electrode velocity, electrode acceleration, slag temperature, melting efficiency, cooling water temperature, cooling water flow rate, crucible temperature profile, slag skin temperature, and/or drip short events are employed, as are parameters representing physical constraints of electroslag remelting or vacuum arc remelting, as applicable.

  11. On-line testing of calibration of process instrumentation channels in nuclear power plants. Phase 2, Final report

    SciTech Connect (OSTI)

    Hashemian, H.M. [Analysis and Measurement Services Corp., Knoxville, TN (United States)

    1995-11-01

    The nuclear industry is interested in automating the calibration of process instrumentation channels; this report provides key results of one of the sponsored projects to determine the validity of automated calibrations. Conclusion is that the normal outputs of instrument channels in nuclear plants can be monitored over a fuel cycle while the plant is operating to determine calibration drift in the field sensors and associated signal conversion and signal conditioning equipment. The procedure for on-line calibration tests involving calculating the deviation of each instrument channel from the best estimate of the process parameter that the instrument is measuring. Methods were evaluated for determining the best estimate. Deviation of each signal from the best estimate is updated frequently while the plant is operating and plotted vs time for entire fuel cycle, thereby providing time history plots that can reveal channel drift and other anomalies. Any instrument channel that exceeds allowable drift or channel accuracy band is then scheduled for calibration during a refueling outage or sooner. This provides calibration test results at the process operating point, one of the most critical points of the channel operation. This should suffice for most narrow-range instruments, although the calibration of some instruments can be verified at other points throughout their range. It should be pointed out that the calibration of some process signals such as the high pressure coolant injection flow in BWRs, which are normally off- scale during plant operation, can not be tested on-line.

  12. Economic assessment of advanced flue gas desulfurization processes. Final report. Volume 2. Appendices G, H, and I

    SciTech Connect (OSTI)

    Bierman, G. R.; May, E. H.; Mirabelli, R. E.; Pow, C. N.; Scardino, C.; Wan, E. I.

    1981-09-01

    This report presents the results of a project sponsored by the Morgantown Energy Technology Center (METC). The purpose of the study was to perform an economic and market assessment of advanced flue gas desulfurization (FGD) processes for application to coal-fired electric utility plants. The time period considered in the study is 1981 through 1990, and costs are reported in 1980 dollars. The task was divided into the following four subtasks: (1) determine the factors affecting FGD cost evaluations; (2) select FGD processes to be cost-analyzed; (3) define the future electric utility FGD system market; and (4) perform cost analyses for the selected FGD processes. The study was initiated in September 1979, and separate reports were prepared for the first two subtasks. The results of the latter two subtasks appear only in this final report, since the end-date of those subtasks coincided with the end-date of the overall task. The Subtask 1 report, Criteria and Methods for Performing FGD Cost Evaluation, was completed in October 1980. A slightly modified and condensed version of that report appears as Appendix B to this report. The Subtask 2 report, FGD Candidate Process Selection, was completed in January 1981, and the principal outputs of that subtask appear in Appendices C and D to this report.

  13. High temperature lubricating process

    DOE Patents [OSTI]

    Taylor, Robert W. (Livermore, CA); Shell, Thomas E. (Livermore, CA)

    1982-01-01

    It has been difficult to provide adaquate lubrication for load bearing, engine components when such engines are operating in excess of about 475.degree. C. The present invention is a process for providing a solid lubricant on a load bearing, solid surface (14), such as in an engine (10) being operated at temperatures in excess of about 475.degree. C. The process comprises contacting and maintaining steps. A gas phase (42) is provided which includes at least one component reactable in a temperature dependent reaction to form a solid lubricant. The gas phase is contacted with the load bearing surface. The load bearing surface is maintained at a temperature which causes reaction of the gas phase component and the formation of the solid lubricant. The solid lubricant is formed directly on the load bearing surface. The method is particularly suitable for use with ceramic engines.

  14. Coated substrates and process

    DOE Patents [OSTI]

    Chu, Wei-kan (Chapel Hill, NC); Childs, Charles B. (Chapel Hill, NC)

    1991-01-01

    Disclosed herein is a coated substrate and a process for forming films on substrates and for providing a particularly smooth film on a substrate. The method of this invention involves subjecting a surface of a substrate to contact with a stream of ions of an inert gas having sufficient force and energy to substantially change the surface characteristics of said substrate, and then exposing a film-forming material to a stream of ions of an inert gas having sufficient energy to vaporize the atoms of said film-forming material and to transmit the vaporized atoms to the substrate surface with sufficient force to form a film bonded to the substrate. This process is particularly useful commercially because it forms strong bonds at room temperature. This invention is particularly useful for adhering a gold film to diamond and forming ohmic electrodes on diamond, but also can be used to bond other films to substrates.

  15. Nucleic acid isolation process

    DOE Patents [OSTI]

    Longmire, Jonathan L. (Los Alamos, NM); Lewis, Annette K. (La Jolla, CA); Hildebrand, Carl E. (Los Alamos, NM)

    1990-01-01

    A method is provided for isolating DNA from eukaryotic cell and flow sorted chromosomes. When DNA is removed from chromosome and cell structure, detergent and proteolytic digestion products remain with the DNA. These products can be removed with organic extraction, but the process steps associated with organic extraction reduce the size of DNA fragments available for experimental use. The present process removes the waste products by dialyzing a solution containing the DNA against a solution containing polyethylene glycol (PEG). The waste products dialyze into the PEG leaving isolated DNA. The remaining DNA has been prepared with fragments containing more than 160 kb. The isolated DNA has been used in conventional protocols without affect on the protocol.

  16. Hydroprocessing catalyst and process

    SciTech Connect (OSTI)

    Chen, N.Y.; Huang, T.J.

    1988-07-12

    In a hydrocracking process for converting a hydrocarbon feed, at least 70% of which boils within the range of 650/sup 0/ to about 1050/sup 0/F, to liquid products boiling in the rane of C/sub 5/+ to 700/sup 0/F. This patent describes a process which comprises contacting the feed and gaseous hydrogen at elevated pressure with a hydrocracking catalyst under hydrocracking conditions. The improvement comprises: contacting the feed with a hydrocracking catalyst composition comprising a hydrogenation component, a crystalline aluminosilicate cracking component having the essential X-ray diffraction pattern of Zeolite Beta, the crystalline aluminosilicate being further characterized by the presence of 0.5 wt % to about 4.0 wt % of framework boron and a silica to alumina ratio of at least about 35, and a solid source of alumina, whereby the catalyst life is extended.

  17. Plutonium dissolution process

    DOE Patents [OSTI]

    Vest, Michael A. (Oak Park, IL); Fink, Samuel D. (Aiken, SC); Karraker, David G. (Aiken, SC); Moore, Edwin N. (Aiken, SC); Holcomb, H. Perry (North Augusta, SC)

    1996-01-01

    A two-step process for dissolving plutonium metal, which two steps can be carried out sequentially or simultaneously. Plutonium metal is exposed to a first mixture containing approximately 1.0M-1.67M sulfamic acid and 0.0025M-0.1M fluoride, the mixture having been heated to a temperature between 45.degree. C. and 70.degree. C. The mixture will dissolve a first portion of the plutonium metal but leave a portion of the plutonium in an oxide residue. Then, a mineral acid and additional fluoride are added to dissolve the residue. Alteratively, nitric acid in a concentration between approximately 0.05M and 0.067M is added to the first mixture to dissolve the residue as it is produced. Hydrogen released during the dissolution process is diluted with nitrogen.

  18. Status Organizing Processes 

    E-Print Network [OSTI]

    Berger, Joseph; Rosenholtz, Susan J; Zelditch, Morris Jr

    2015-08-15

    STATUS ORGANIZING PROCESSES Joseph Berger Susan J. Rosenholtz Morris Zelditch, Jr. Technical Report #77 Stanford University January 1980 To appear in the Annual Review of Sociology, Vol. 6, 1980. This paper was prepared while Or. Rosenholtz was a... to take place--in such a way that the expectation-states are confirmed, hence maintained, by the very interaction that depends on them (Berger, 1958; Berger & Snell, 1961; Berger, Conner & McKeown, 1969; Berger & Conner, 1969, 1974; Fisek, 1968, 1974...

  19. Actinide recovery process

    DOE Patents [OSTI]

    Muscatello, A.C.; Navratil, J.D.; Saba, M.T.

    1985-06-13

    Process for the removal of plutonium polymer and ionic actinides from aqueous solutions by absorption onto a solid extractant loaded on a solid inert support such as polystyrene-divinylbenzene. The absorbed actinides can then be recovered by incineration, by stripping with organic solvents, or by acid digestion. Preferred solid extractants are trioctylphosphine oxide and octylphenyl-N,N-diisobutylcarbamoylmethylphosphine oxide and the like. 2 tabs.

  20. Process for producing silicon

    DOE Patents [OSTI]

    Olson, Jerry M. (Lakewood, CO); Carleton, Karen L. (Boulder, CO)

    1984-01-01

    A process for producing silicon includes forming an alloy of copper and silicon and positioning the alloy in a dried, molten salt electrolyte to form a solid anode structure therein. An electrically conductive cathode is placed in the electrolyte for plating silicon thereon. The electrolyte is then purified to remove dissolved oxides. Finally, an electrical potential is applied between the anode and cathode in an amount sufficient to form substantially pure silicon on the cathode in the form of substantially dense, coherent deposits.

  1. ESPC ENABLE Procurement Process

    Broader source: Energy.gov [DOE]

    Energy Savings Performance Contract (ESPC) ENABLE's streamlined five-phase procurement process uses General Services Administration (GSA) Award Schedule 84, SIN 246-53 as the procurement vehicle to award projects. The Schedule allows Federal customers to quickly and easily select a qualified contractor to perform an investment grade audit and ultimately develop and install the project. The Schedule also distinguishes vendors that hold small business designations, allowing customers to execute small business set asides if included in their acquisition planning strategy.

  2. Pyrolysis process and apparatus

    DOE Patents [OSTI]

    Lee, Chang-Kuei (Sewell, NJ)

    1983-01-01

    This invention discloses a process and apparatus for pyrolyzing particulate coal by heating with a particulate solid heating media in a transport reactor. The invention tends to dampen fluctuations in the flow of heating media upstream of the pyrolysis zone, and by so doing forms a substantially continuous and substantially uniform annular column of heating media flowing downwardly along the inside diameter of the reactor. The invention is particularly useful for bituminous or agglomerative type coals.

  3. Anaerobic digestion process

    SciTech Connect (OSTI)

    Ishida, M.; Haga, R.; Odawara, Y.

    1982-10-19

    An algae culture grown on the water from the digested slurry of a biogasification plant serves as a means of removing CO/sub 2/ from the methane stream while purifying the wastewater and providing more biomass for the anaerobic digestion plant. Tested on a sewage-sludge digestion system, the proposed process improved the methane yield by 32% and methane concentration by 53-98 vol % while lowering the concentration of nitrogen and phosphorus in the final water.

  4. Carbon dioxide removal process

    DOE Patents [OSTI]

    Baker, Richard W.; Da Costa, Andre R.; Lokhandwala, Kaaeid A.

    2003-11-18

    A process and apparatus for separating carbon dioxide from gas, especially natural gas, that also contains C.sub.3+ hydrocarbons. The invention uses two or three membrane separation steps, optionally in conjunction with cooling/condensation under pressure, to yield a lighter, sweeter product natural gas stream, and/or a carbon dioxide stream of reinjection quality and/or a natural gas liquids (NGL) stream.

  5. Process for producing silicon

    DOE Patents [OSTI]

    Olson, J.M.; Carleton, K.L.

    1982-06-10

    A process of producing silicon includes forming an alloy of copper and silicon and positioning the alloy in a dried, molten salt electrolyte to form a solid anode structure therein. An electrically conductive cathode is placed in the electrolyte for plating silicon thereon. The electrolyte is then purified to remove dissolved oxides. Finally, an electrical potential is applied between the anode and cathode in an amount sufficient to form substantially pure silicon on the cathode in the form of substantially dense, coherent deposits.

  6. Hydropower Process Improvements

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergy HeadquartersFuelB IMSofNewsletterGuidingUpdate WebinarProductionStorageHydrogenProcess

  7. Monolith electroplating process

    DOE Patents [OSTI]

    Agarrwal, Rajev R. (1410 S. Busse Rd., 2K, Mt. Prospect, IL 60056)

    2001-01-01

    An electroplating process for preparing a monolith metal layer over a polycrystalline base metal and the plated monolith product. A monolith layer has a variable thickness of one crystal. The process is typically carried in molten salts electrolytes, such as the halide salts under an inert atmosphere at an elevated temperature, and over deposition time periods and film thickness sufficient to sinter and recrystallize completely the nucleating metal particles into one single crystal or crystals having very large grains. In the process, a close-packed film of submicron particle (20) is formed on a suitable substrate at an elevated temperature. The temperature has the significance of annealing particles as they are formed, and substrates on which the particles can populate are desirable. As the packed bed thickens, the submicron particles develop necks (21) and as they merge into each other shrinkage (22) occurs. Then as micropores also close (23) by surface tension, metal density is reached and the film consists of unstable metal grain (24) that at high enough temperature recrystallize (25) and recrystallized grains grow into an annealed single crystal over the electroplating time span. While cadmium was used in the experimental work, other soft metals may be used.

  8. RACORO aerosol data processing

    SciTech Connect (OSTI)

    Elisabeth Andrews

    2011-10-31

    The RACORO aerosol data (cloud condensation nuclei (CCN), condensation nuclei (CN) and aerosol size distributions) need further processing to be useful for model evaluation (e.g., GCM droplet nucleation parameterizations) and other investigations. These tasks include: (1) Identification and flagging of 'splash' contaminated Twin Otter aerosol data. (2) Calculation of actual supersaturation (SS) values in the two CCN columns flown on the Twin Otter. (3) Interpolation of CCN spectra from SGP and Twin Otter to 0.2% SS. (4) Process data for spatial variability studies. (5) Provide calculated light scattering from measured aerosol size distributions. Below we first briefly describe the measurements and then describe the results of several data processing tasks that which have been completed, paving the way for the scientific analyses for which the campaign was designed. The end result of this research will be several aerosol data sets which can be used to achieve some of the goals of the RACORO mission including the enhanced understanding of cloud-aerosol interactions and improved cloud simulations in climate models.

  9. OPTIMAL OPERATION OF INTEGRATED PROCESSES

    E-Print Network [OSTI]

    Skogestad, Sigurd

    OPTIMAL OPERATION OF INTEGRATED PROCESSES Studies on Heat Recovery Systems by Bjørn Glemmestad exchanger network (HEN) for heat recovery. Within the process engineering community, much attention has been

  10. Problem Tools The censored process Results Censored stable processes

    E-Print Network [OSTI]

    Problem Tools The censored process Results Censored stable processes Andreas E. Kyprianou1 Juan-Carlos Pardo2 Alex Watson1 1 Unversity of Bath, UK. 2 CIMAT, Mexico. #12;Problem Tools The censored process(Xt 0) will frequently appear as will ^ = 1 - . #12;Problem Tools The censored process Results Stable

  11. Invoice Approval Process Roadmap (Processing Receipts) May 27, 2010

    E-Print Network [OSTI]

    Li, X. Rong

    Invoice Approval Process Roadmap (Processing Receipts) May 27, 2010 1 Scenario: The Match Exception on the instruction page. #9 #5 #11 #9 #7 Receipt #1 Receipt #2 #12;Invoice Approval Process Roadmap (Processing the PO ID from the Match Exception Report in the ID field. (Use Roadmap) 6. Select, Search 7. Check

  12. Principal Investigator Sponsor Project Title Cornell University, Office of Sponsored Programs

    E-Print Network [OSTI]

    Danforth, Bryan Nicholas

    , SEISMICITY AND TECTONICS OF THE JAPANESE ISLAND ARC FROM NEW DEEP SEISMIC EXPLORATION. INSTOC $5,000 KLH MARKETS TXA $183,724 GEA 40179 BAKER, DALE SUNY, STONY BROOK SEA GRANT MASTER COOPERATIVE AGREEMENTADMIN PRODUCTPLTPATH $75,000 JTD 28574 BELL, JAMES F NASA, JOHNSON SC COORDINATED ANALYSIS AND CALIBRATION STUDIES

  13. List of Sponsors The Research Laboratory of Electronics thanks the following sponsors for making the research

    E-Print Network [OSTI]

    Foundation Hewlett-Packard Ford-MIT Alliance HST IARPA IBM Industry Institute for Soldier Nanotechnologies - Department of Electrical Engineering and Computer Science (EECS) MIT Deshpande Center MIT - Energy Initiative Foundation Government of India GRFP Harvard Materials Research Science and Engineering Center Hertz

  14. Unit PI Dept PI Name All Investigators Sponsor Project Title Sponsor Costs Institution

    E-Print Network [OSTI]

    Capogna, Luca

    , Food, & Life Sciences BAEG Jin, Sha Jin, Sha~ Arkansas Biosciences Institute (ABI) Functional Role. Agriculture, Food, & Life Sciences BAEG Haggard, Brian Matlock, Marty~Haggard, Brian~ Arkansas Natural Basin $649,097 T11.0710 Agriculture, Food, & Life Sciences BAEG Haggard, Brian Sharpley, Andrew

  15. Geospatial Open Source & Remote SensingGeospatial Open Source & Remote Sensing Sponsored by:Sponsored by

    E-Print Network [OSTI]

    Brown, Sally

    207207 College of Forest Resources, University of Washington, SeattleCollege of Forest Resources Archive for Humanitarian Demining" - Matthew Dunbar, PhD Candidate in Geography, University of Kansas

  16. Environmental assessment in support of proposed interim energy conservation voluntary performance standards for new non-federal residential buildings: Volume 7

    SciTech Connect (OSTI)

    NONE

    1989-09-01

    The objective of this environmental assessment (EA) is to identify the potential environmental impacts that could result from the proposed voluntary residential standard (VOLRES) on private sector construction of new residential buildings. In this report, the scope, objectives, and approach of this EA are presented.

  17. Incremental Process Support for Code Reengineering: An Update

    E-Print Network [OSTI]

    , System Build, Tool Enveloping. c fl1996 Gail E. Kaiser, George T. Heineman, Peter D. Skopp and Jack J. Yang This paper is based on work sponsored in part by Advanced Research Project Agency under ARPA Order­9301092, and in part by New York State Science and Technology Foundation Center for Advanced Technology

  18. Team 1: Additive Metal Processing for the Production

    E-Print Network [OSTI]

    Alpay, S. Pamir

    that were manufactured by DMLS at Linear Mold & Engineering. These samples were produced by an EOS M280 using DMLS by Linear Mold & Engineering. The samples were produced to a final precipitation hardened MATERIALSSCIENCE&ENGINEERING #12;109 Team 2: Salt Penetrometry for Design of Reduced Defect Filters Sponsored by

  19. Coal liquefaction process

    DOE Patents [OSTI]

    Wright, Charles H. (Overland Park, KS)

    1986-01-01

    A process for the liquefaction of coal wherein raw feed coal is dissolved in recycle solvent with a slurry containing recycle coal minerals in the presence of added hydrogen at elevated temperature and pressure. The highest boiling distillable dissolved liquid fraction is obtained from a vacuum distillation zone and is entirely recycled to extinction. Lower boiling distillable dissolved liquid is removed in vapor phase from the dissolver zone and passed without purification and essentially without reduction in pressure to a catalytic hydrogenation zone where it is converted to an essentially colorless liquid product boiling in the transportation fuel range.

  20. Fusion welding process

    DOE Patents [OSTI]

    Thomas, Kenneth C. (Export, PA); Jones, Eric D. (Salem, PA); McBride, Marvin A. (Hempfield Township, Westmoreland County, PA)

    1983-01-01

    A process for the fusion welding of nickel alloy steel members wherein a ferrite containing pellet is inserted into a cavity in one member and melted by a welding torch. The resulting weld nugget, a fusion of the nickel containing alloy from the members to be welded and the pellet, has a composition which is sufficiently low in nickel content such that ferrite phases occur within the weld nugget, resulting in improved weld properties. The steel alloys encompassed also include alloys containing carbon and manganese, considered nickel equivalents.

  1. FHR Process Instruments

    SciTech Connect (OSTI)

    Holcomb, David Eugene

    2015-01-01

    Fluoride salt-cooled High temperature Reactors (FHRs) are entering into early phase engineering development. Initial candidate technologies have been identified to measure all of the required process variables. The purpose of this paper is to describe the proposed measurement techniques in sufficient detail to enable assessment of the proposed instrumentation suite and to support development of the component technologies. This paper builds upon the instrumentation chapter of the recently published FHR technology development roadmap. Locating instruments outside of the intense core radiation and high-temperature fluoride salt environment significantly decreases their environmental tolerance requirements. Under operating conditions, FHR primary coolant salt is a transparent, low-vapor-pressure liquid. Consequently, FHRs can employ standoff optical measurements from above the salt pool to assess in-vessel conditions. For example, the core outlet temperature can be measured by observing the fuel s blackbody emission. Similarly, the intensity of the core s Cerenkov glow indicates the fission power level. Short-lived activation of the primary coolant provides another means for standoff measurements of process variables. The primary coolant flow and neutron flux can be measured using gamma spectroscopy along the primary coolant piping. FHR operation entails a number of process measurements. Reactor thermal power and core reactivity are the most significant variables for process control. Thermal power can be determined by measuring the primary coolant mass flow rate and temperature rise across the core. The leading candidate technologies for primary coolant temperature measurement are Au-Pt thermocouples and Johnson noise thermometry. Clamp-on ultrasonic flow measurement, that includes high-temperature tolerant standoffs, is a potential coolant flow measurement technique. Also, the salt redox condition will be monitored as an indicator of its corrosiveness. Both electrochemical techniques and optical spectroscopy are candidate fluoride salt redox measurement methods. Coolant level measurement can be performed using radar-level gauges located in standpipes above the reactor vessel. While substantial technical development remains for most of the instruments, industrially compatible instruments based upon proven technology can be reasonably extrapolated from the current state of the art.

  2. Farm Feed Processing

    E-Print Network [OSTI]

    Allen, W. S.; Sorenson, J. W.; McCune, W. E.

    1961-01-01

    PLANNING- A DESI-N , s ~IiABY mUMENTS DNISfOH A & M COUEGE Of TOW CWfGE STATN)N, ; l- \\.~i - MECHANIZATION OF FEED processing and handling oper- ations should be approached with caution. Mechanization is justified for one or more of the following..../hr. 'peed from HP per 10 Trn horizontal, o ft. length Wheat Oats Cornlneal Angle Approximate Maximum capacit!., Speed from HPper10 bu. / hr. 1 rpm horizontal, O ft. length Wheat Oats Cornmeal I Capacities are interpolated from several sources...

  3. Processing Poultry at Home 

    E-Print Network [OSTI]

    Davis, Michael

    2006-01-04

    an ear lobe. Cut the neck close to the ear lobe on one side only. Avoid cutting the windpipe and esophagus. Cut only the neck vein. This reduces the possibility of car- cass contamination by blood being drawn into the air sacs. After cutting the neck..., picking, eviscerating and chilling. It is important to prevent con- tamination of the meat, either from the surroundings where the process- ing is done or from the bird?s intesti- nal or crop contents. Contamination lowers quality and shortens the time...

  4. Process for fullerene functionalization

    DOE Patents [OSTI]

    Cahill, P.A.; Henderson, C.C.

    1995-12-12

    Di-addended and tetra-addended Buckminster fullerenes are synthesized through the use of novel organoborane intermediates. The C{sub 60}, C{sub 70}, or higher fullerene is reacted with a borane such as BH{sub 3} in a solvent such as toluene to form an organoborane intermediate. Reaction of the organoborane such as hydrolysis with water or alcohol results in the product di-addended and tetra-addended fullerene in up to 30% yields. Dihydrofullerenes and tetrahydrofullerenes are produced by the process of the invention. 7 figs.

  5. Coal liquefaction process

    DOE Patents [OSTI]

    Wright, C.H.

    1986-02-11

    A process is described for the liquefaction of coal wherein raw feed coal is dissolved in recycle solvent with a slurry containing recycle coal minerals in the presence of added hydrogen at elevated temperature and pressure. The highest boiling distillable dissolved liquid fraction is obtained from a vacuum distillation zone and is entirely recycled to extinction. Lower boiling distillable dissolved liquid is removed in vapor phase from the dissolver zone and passed without purification and essentially without reduction in pressure to a catalytic hydrogenation zone where it is converted to an essentially colorless liquid product boiling in the transportation fuel range. 1 fig.

  6. Municipal waste processing apparatus

    DOE Patents [OSTI]

    Mayberry, John L. (Idaho Falls, ID)

    1988-01-01

    Municipal waste materials are processed by crushing the materials so that pieces of noncombustible material are smaller than a selected size and pieces of combustible material are larger than the selected size. The crushed materials are placed on a vibrating mesh screen conveyor belt having openings which pass the smaller, noncombustible pieces of material, but do not pass the larger, combustible pieces of material. Pieces of material which become lodged in the openings of the conveyor belt may be removed by cylindrical deraggers or pressurized air. The crushed materials may be fed onto the conveyor belt by a vibrating feed plate which shakes the materials so that they tend to lie flat.

  7. Municipal waste processing apparatus

    DOE Patents [OSTI]

    Mayberry, John L. (Idaho Falls, ID)

    1989-01-01

    Municipal waste materials are processed by crushing the materials so that pieces of noncombustible material are smaller than a selected size and pieces of combustible material are larger than the selected size. The crushed materials are placed on a vibrating mesh screen conveyor belt having openings which pass the smaller, noncombustible pieces of material, but do not pass the larger, combustible pieces of material. Consecutive conveyors may be connected by an intermediate vibratory plate. An air knife can be used to further separate materials based on weight.

  8. New-Hire Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDid you notHeatMaRIEdioxide captureTransportation We'reseparation |Process

  9. ARM - Process Configuration Manager

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Comments?govInstrumentsnoaacrnBarrow, Alaska OutreachCalendarPress Releases Related Links TWP-ICE HomeFormsProcess

  10. Hiring Process | Careers | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy, Ph.D. Title:Highlights LANS investsHiring Process We're

  11. In-Process Characterization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy,ImpactScientific and Technical 1 In-Process

  12. Exposure Evaluation Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submitKansasCommunitiesof Energy8)highlightsNew PhaseExposure Evaluation Process

  13. The Multi-Isotope Process (MIP) Monitor Project: FY12 Progress and Accomplishments

    SciTech Connect (OSTI)

    Coble, Jamie B.; Orton, Christopher R.; Jordan, David V.; Schwantes, Jon M.; Bender, Sarah; Dayman, Kenneth J.; Unlu, Kenan; Landsberger, Sheldon

    2012-09-27

    The Multi-Isotope Process (MIP) Monitor, being developed at Pacific Northwest National Laboratory (PNNL), provides an efficient approach to monitoring the process conditions in reprocessing facilities in support of the goal of "...(minimization of) the risks of nuclear proliferation and terrorism." The MIP Monitor measures distributions of a suite of indicator (radioactive) isotopes present within product and waste streams of a nuclear reprocessing facility. These indicator isotopes are monitored on-line by gamma spectrometry and compared, in near-real-time, to spectral patterns representing "normal" process conditions using multivariate pattern recognition software. The monitor utilizes this multivariate analysis and gamma spectroscopy of reprocessing streams to detect small changes in the gamma spectrum, which may indicate changes in process conditions. Multivariate analysis methods common in chemometrics, such as principal component analysis (PCA) and partial least squares regression (PLS), act as pattern recognition techniques, which can detect small deviations from the expected, nominal condition. By targeting multiple gamma-emitting indicator isotopes, the MIP Monitor approach is compatible with the use of small, portable, relatively high-resolution gamma detectors that may be easily deployed throughout an existing facility. The automated multivariate analysis can provide a level of data obscurity, giving a built-in information barrier to protect sensitive or proprietary operational data. Proof-of-concept simulations and experiments have been performed in previous years to demonstrate the validity of this tool in a laboratory setting. Development of the MIP Monitor approach continues to evaluate the efficacy of the monitor for automated, real-time or near-real-time application. This report details follow-on research and development efforts sponsored by the U.S. Department of Energy Fuel Cycle Research and Development related to the MIP Monitor for fiscal year 2012 (FY12).

  14. High conversion hydrocracking process

    SciTech Connect (OSTI)

    Stine, L.O.; Reno, M.E.; Munro, W.H.; Hamper, S.J.

    1990-10-09

    This patent describes a process for hydrocracking a heavy hydrocarbon feed stream having a 10 percent boiling point above about 316{degrees} C. It comprises: passing the feedstream into a catalytic hydrocracking reaction zone in contact with hydrocracking catalyst comprising at least one metal selected from the group consisting of chromium, nickel, cobalt, platinum, palladium, tungsten and molybdenum, at a temperature above about 316{degrees} C. and a total pressure above 1480 kPa, the catalytic hydrocracking reaction zone operating at a feed stream conversion rate above 70 wt. percent with a hydrogen circulation rate in excess at 1777 m{sup 3}/m{sup 3}, to produce a reaction zone effluent stream, subjecting the reaction zone effluent stream to cooling and a vapor-liquid separation to yield a recycle hydrogen stream and a liquid phase stream, heating the liquid phase stream recovered from the vapor-liquid separation to vaporize at least 90 volume percent of the liquid phase stream, passing the heated and at least partially vaporized liquid phase stream to a fractionation zone wherein the stream is separated into at least a net bottoms stream, a heavy distillate stream, and at least one light distillate stream which is removed as the distillate product stream, removing all of the net bottoms stream from the process, and recycling substantially all of the heavy distillate stream to the catalytic hydrocracking zone.

  15. Large forging manufacturing process

    DOE Patents [OSTI]

    Thamboo, Samuel V. (Latham, NY); Yang, Ling (Niskayuna, NY)

    2002-01-01

    A process for forging large components of Alloy 718 material so that the components do not exhibit abnormal grain growth includes the steps of: a) providing a billet with an average grain size between ASTM 0 and ASTM 3; b) heating the billet to a temperature of between 1750.degree. F. and 1800.degree. F.; c) upsetting the billet to obtain a component part with a minimum strain of 0.125 in at least selected areas of the part; d) reheating the component part to a temperature between 1750.degree. F. and 1800.degree. F.; e) upsetting the component part to a final configuration such that said selected areas receive no strains between 0.01 and 0.125; f) solution treating the component part at a temperature of between 1725.degree. F. and 1750.degree. F.; and g) aging the component part over predetermined times at different temperatures. A modified process achieves abnormal grain growth in selected areas of a component where desirable.

  16. Improving the FPGA Design Process Through Determining and Applying Logical-to-Physical Design Mappings

    E-Print Network [OSTI]

    Nelson, Brent E.

    this knowledge can be used, we de- scribe, in detail, how to determine the logical-to-physical mapping of Xilinx. Effort sponsored by the Defense Advanced Research Projects Agency (DARPA) and Rome Laboratory, Air Force

  17. Improving the FPGA Design Process Through Determining and Applying LogicaltoPhysical Design Mappings #

    E-Print Network [OSTI]

    Nelson, Brent E.

    this knowledge can be used, we de­ scribe, in detail, how to determine the logical­to­physical mapping of Xilinx. # Effort sponsored by the Defense Advanced Research Projects Agency (DARPA) and Rome Laboratory, Air Force

  18. Solid State Processing of New Low Cost Titanium Powders Enabling Affordable Automotive Components

    Broader source: Energy.gov [DOE]

    Presentation given at the 2007 Diesel Engine-Efficiency & Emissions Research Conference (DEER 2007). 13-16 August, 2007, Detroit, Michigan. Sponsored by the U.S. Department of Energy's (DOE) Office of FreedomCAR and Vehicle Technologies (OFCVT).

  19. A Solution Route to Thermoelectric Oxide Nanoparticles- A Sol-Gel Process Employing Heterometallic Alkoxides

    Broader source: Energy.gov [DOE]

    Poster presentation at the 2007 Diesel Engine-Efficiency & Emissions Research Conference (DEER 2007). 13-16 August, 2007, Detroit, Michigan. Sponsored by the U.S. Department of Energy's (DOE) Office of FreedomCAR and Vehicle Technologies (OFCVT).

  20. Shale oil recovery process

    DOE Patents [OSTI]

    Zerga, Daniel P. (Concord, CA)

    1980-01-01

    A process of producing within a subterranean oil shale deposit a retort chamber containing permeable fragmented material wherein a series of explosive charges are emplaced in the deposit in a particular configuration comprising an initiating round which functions to produce an upward flexure of the overburden and to initiate fragmentation of the oil shale within the area of the retort chamber to be formed, the initiating round being followed in a predetermined time sequence by retreating lines of emplaced charges developing further fragmentation within the retort zone and continued lateral upward flexure of the overburden. The initiating round is characterized by a plurality of 5-spot patterns and the retreating lines of charges are positioned and fired along zigzag lines generally forming retreating rows of W's. Particular time delays in the firing of successive charges are disclosed.

  1. Electrowinning apparatus and process

    DOE Patents [OSTI]

    Buschmann, Wayne E. (Boulder, CO)

    2012-06-19

    Apparatus and processes are disclosed for electrowinning metal from a fluid stream. A representative apparatus comprises at least one spouted bed reactor wherein each said reactor includes an anolyte chamber comprising an anode and configured for containing an anolyte, a catholyte chamber comprising a current collector and configured for containing a particulate cathode bed and a flowing stream of an electrically conductive metal-containing fluid, and a membrane separating said anolyte chamber and said catholyte chamber, an inlet for an electrically conductive metal-containing fluid stream; and a particle bed churning device configured for spouting particle bed particles in the catholyte chamber independently of the flow of said metal-containing fluid stream. In operation, reduced heavy metals or their oxides are recovered from the cathode particles.

  2. Epoxidation catalyst and process

    DOE Patents [OSTI]

    Linic, Suljo (Ann Arbor, MI); Christopher, Phillip (Ann Arbor, MI)

    2010-10-26

    Disclosed herein is a catalytic method of converting alkenes to epoxides. This method generally includes reacting alkenes with oxygen in the presence of a specific silver catalyst under conditions suitable to produce a yield of the epoxides. The specific silver catalyst is a silver nanocrystal having a plurality of surface planes, a substantial portion of which is defined by Miller indices of (100). The reaction is performed by charging a suitable reactor with this silver catalyst and then feeding the reactants to the reactor under conditions to carry out the reaction. The reaction may be performed in batch, or as a continuous process that employs a recycle of any unreacted alkenes. The specific silver catalyst has unexpectedly high selectivity for epoxide products. Consequently, this general method (and its various embodiments) will result in extraordinarily high epoxide yields heretofore unattainable.

  3. Catalytic hydrocracking process

    SciTech Connect (OSTI)

    Absil, R.P.L.; Degnan, T.F.; Han, S.; Marler, D.O.; Socha, R.F.; Stapleton, M.R.

    1991-05-07

    This patent describes a dual stage hydrocracking conversion process. It comprises: contacting a hydrocarbon stream boiling above a temperature of about 300{degrees} F. in a first stage under hydrocracking conditions and in the presence of hydrogen with a first hydrocracking catalyst composition comprising a synthetic porous crystalline material characterized by an x-ray diffraction pattern including values substantially as set forth in Table I of the specification and at least one hydrogenation component to provide a first hydrocracked effluent; and contacting the first hydrocracked effluent in a second stage under hydrocracking conditions and in the presence of hydrogen with a second hydrocracking catalyst composition comprising zeolite Beta and at least one hydrogenation component to provide a second hydrocracked effluent.

  4. Continuous process electrorefiner

    DOE Patents [OSTI]

    Herceg, Joseph E. (Naperville, IL); Saiveau, James G. (Hickory Hills, IL); Krajtl, Lubomir (Woodridge, IL)

    2006-08-29

    A new device is provided for the electrorefining of uranium in spent metallic nuclear fuels by the separation of unreacted zirconium, noble metal fission products, transuranic elements, and uranium from spent fuel rods. The process comprises an electrorefiner cell. The cell includes a drum-shaped cathode horizontally immersed about half-way into an electrolyte salt bath. A conveyor belt comprising segmented perforated metal plates transports spent fuel into the salt bath. The anode comprises the conveyor belt, the containment vessel, and the spent fuel. Uranium and transuranic elements such as plutonium (Pu) are oxidized at the anode, and, subsequently, the uranium is reduced to uranium metal at the cathode. A mechanical cutter above the surface of the salt bath removes the deposited uranium metal from the cathode.

  5. Processing Visual Images

    SciTech Connect (OSTI)

    Litke, Alan (UC Santa Cruz) [UC Santa Cruz

    2006-03-27

    The back of the eye is lined by an extraordinary biological pixel detector, the retina. This neural network is able to extract vital information about the external visual world, and transmit this information in a timely manner to the brain. In this talk, Professor Litke will describe a system that has been implemented to study how the retina processes and encodes dynamic visual images. Based on techniques and expertise acquired in the development of silicon microstrip detectors for high energy physics experiments, this system can simultaneously record the extracellular electrical activity of hundreds of retinal output neurons. After presenting first results obtained with this system, Professor Litke will describe additional applications of this incredible technology.

  6. Fluorination process using catalyst

    DOE Patents [OSTI]

    Hochel, Robert C. (Aiken, SC); Saturday, Kathy A. (Aiken, SC)

    1985-01-01

    A process for converting an actinide compound selected from the group consisting of uranium oxides, plutonium oxides, uranium tetrafluorides, plutonium tetrafluorides and mixtures of said oxides and tetrafluorides, to the corresponding volatile actinide hexafluoride by fluorination with a stoichiometric excess of fluorine gas. The improvement involves conducting the fluorination of the plutonium compounds in the presence of a fluoride catalyst selected from the group consisting of CoF.sub.3, AgF.sub.2 and NiF.sub.2, whereby the fluorination is significantly enhanced. The improvement also involves conducting the fluorination of one of the uranium compounds in the presence of a fluoride catalyst selected from the group consisting of CoF.sub.3 and AgF.sub.2, whereby the fluorination is significantly enhanced.

  7. Fluorination process using catalysts

    DOE Patents [OSTI]

    Hochel, R.C.; Saturday, K.A.

    1983-08-25

    A process is given for converting an actinide compound selected from the group consisting of uranium oxides, plutonium oxides, uranium tetrafluorides, plutonium tetrafluorides and mixtures of said oxides and tetrafluorides, to the corresponding volatile actinide hexafluoride by fluorination with a stoichiometric excess of fluorine gas. The improvement involves conducting the fluorination of the plutonium compounds in the presence of a fluoride catalyst selected from the group consisting of CoF/sub 3/, AgF/sub 2/ and NiF/sub 2/, whereby the fluorination is significantly enhanced. The improvement also involves conducting the fluorination of one of the uranium compounds in the presence of a fluoride catalyst selected from the group consisting of CoF/sub 3/ and AgF/sub 2/, whereby the fluorination is significantly enhanced.

  8. Progressing batch hydrolysis process

    DOE Patents [OSTI]

    Wright, J.D.

    1985-01-10

    A progressive batch hydrolysis process is disclosed for producing sugar from a lignocellulosic feedstock. It comprises passing a stream of dilute acid serially through a plurality of percolation hydrolysis reactors charged with feed stock, at a flow rate, temperature and pressure sufficient to substantially convert all the cellulose component of the feed stock to glucose. The cooled dilute acid stream containing glucose, after exiting the last percolation hydrolysis reactor, serially fed through a plurality of pre-hydrolysis percolation reactors, charged with said feedstock, at a flow rate, temperature and pressure sufficient to substantially convert all the hemicellulose component of said feedstock to glucose. The dilute acid stream containing glucose is cooled after it exits the last prehydrolysis reactor.

  9. Plutonium dissolution process

    DOE Patents [OSTI]

    Vest, M.A.; Fink, S.D.; Karraker, D.G.; Moore, E.N.; Holcomb, H.P.

    1994-01-01

    A two-step process for dissolving Pu metal is disclosed in which two steps can be carried out sequentially or simultaneously. Pu metal is exposed to a first mixture of 1.0-1.67 M sulfamic acid and 0.0025-0.1 M fluoride, the mixture having been heated to 45-70 C. The mixture will dissolve a first portion of the Pu metal but leave a portion of the Pu in an oxide residue. Then, a mineral acid and additional fluoride are added to dissolve the residue. Alternatively, nitric acid between 0.05 and 0.067 M is added to the first mixture to dissolve the residue as it is produced. Hydrogen released during the dissolution is diluted with nitrogen.

  10. Process for improving metal production in steelmaking processes

    SciTech Connect (OSTI)

    Pal, Uday B. (Malden, MA); Gazula, Gopala K. M. (Somerville, MA); Hasham, Ali (Karachi, PK)

    1996-01-01

    A process and apparatus for improving metal production in ironmaking and steelmaking processes is disclosed. The use of an inert metallic conductor in the slag containing crucible and the addition of a transition metal oxide to the slag are the disclosed process improvements.

  11. Process for improving metal production in steelmaking processes

    DOE Patents [OSTI]

    Pal, U.B.; Gazula, G.K.M.; Hasham, A.

    1996-06-18

    A process and apparatus for improving metal production in ironmaking and steelmaking processes is disclosed. The use of an inert metallic conductor in the slag containing crucible and the addition of a transition metal oxide to the slag are the disclosed process improvements. 6 figs.

  12. Kinetic processes of mantle minerals

    E-Print Network [OSTI]

    Koga, Kenneth Tadao, 1969-

    2000-01-01

    This dissertation discusses the experimental results designed to constrain the processes of MORB generation. The main focus of this study is to investigate the location and the related processes of the transformation ...

  13. Normalization of Process Safety Metrics 

    E-Print Network [OSTI]

    Wang, Mengtian

    2012-10-19

    and organizational risks, there is an emerging need to evaluate the process safety implementation across an organization through measurements. Thus, the process safety metric is applied as a powerful tool that measures safety activities, status, and performance...

  14. Topics in genomic image processing 

    E-Print Network [OSTI]

    Hua, Jianping

    2006-04-12

    The image processing methodologies that have been actively studied and developed now play a very significant role in the flourishing biotechnology research. This work studies, develops and implements several image processing techniques for M...

  15. Marine Ecological Processes Online section

    E-Print Network [OSTI]

    Hill, Jeffrey E.

    Marine Ecological Processes Online section FAS 6272 (3 credits) Fall 2014 Course Description, behavior, population dynamics, and community structure in marine and estuarine ecosystems. Prerequisite will have: · Examined how ecological processes operate in the marine environment · Compared how ecological

  16. Towards a Security Engineering Process Model for Electronic Business Processes

    E-Print Network [OSTI]

    Eichler, Jörn

    2012-01-01

    Business process management (BPM) and accompanying systems aim at enabling enterprises to become adaptive. In spite of the dependency of enterprises on secure business processes, BPM languages and techniques provide only little support for security. Several complementary approaches have been proposed for security in the domain of BPM. Nevertheless, support for a systematic procedure for the development of secure electronic business processes is still missing. In this paper, we pinpoint the need for a security engineering process model in the domain of BPM and identify key requirements for such process model.

  17. Radioactive waste processing apparatus

    DOE Patents [OSTI]

    Nelson, Robert E. (Lombard, IL); Ziegler, Anton A. (Darien, IL); Serino, David F. (Maplewood, MN); Basnar, Paul J. (Western Springs, IL)

    1987-01-01

    Apparatus for use in processing radioactive waste materials for shipment and storage in solid form in a container is disclosed. The container includes a top, and an opening in the top which is smaller than the outer circumference of the container. The apparatus includes an enclosure into which the container is placed, solution feed apparatus for adding a solution containing radioactive waste materials into the container through the container opening, and at least one rotatable blade for blending the solution with a fixing agent such as cement or the like as the solution is added into the container. The blade is constructed so that it can pass through the opening in the top of the container. The rotational axis of the blade is displaced from the center of the blade so that after the blade passes through the opening, the blade and container can be adjusted so that one edge of the blade is adjacent the cylindrical wall of the container, to insure thorough mixing. When the blade is inside the container, a substantially sealed chamber is formed to contain vapors created by the chemical action of the waste solution and fixant, and vapors emanating through the opening in the container.

  18. Fixed bed hydrocracking process

    SciTech Connect (OSTI)

    MacLean, A.J.; Holloway, R.L.; Lawson, V.A.; Cronen, J.W.

    1990-02-20

    This patent describes a process for converting a gas oil range petroleum feedstock into lighter petroleum products. It comprises: charging the gas oil range petroleum feedstock and hydrogen to a first fixed bed hydrocracking zone containing a hydrocracking catalyst at hydrocracking conditions to produce a first hydrocracking zone product stream; separating the first fixed bed hydrocracking zone product stream in a fractionation zone into a petroleum products stream and a bottoms stream; charging the bottoms stream and hydrogen to a second fixed bed hydrocracking zone containing a hydrocracking catalyst at hydrocracking conditions to produce a second fixed bed hydrocracking zone product stream; cooling the second fixed bed hydrocracking zone product stream to a temperature below about 250{degrees}F; recycling a first portion of the cooled second fixed bed hydrocracking zone product stream to the fractionation zone; removing materials having a boiling range from about 500{degrees} to about 650{degrees}F and a heavy bottoms stream having a boiling point above about 1050{degrees}F from a second portion of the cooled second fixed bed hydrocracking zone product stream to product a treated second portion; and recycling the treated second portion to the first fixed bed hydrocracking zone.

  19. Process for functionalizing alkanes

    DOE Patents [OSTI]

    Bergman, Robert G. (Kensington, CA); Janowicz, Andrew H. (Wilmington, DE); Periana, Roy A. (Berkeley, CA)

    1988-01-01

    Process for functionalizing saturated hydrocarbons comprising: (a) reacting said saturated hydrocarbons of the formula: R.sub.1 H wherein H represents a hydrogen atom; and R.sub.1 represents a saturated hydrocarbon radical, with a metal complex of the formula: CpRh[P(R.sub.2).sub.3 ]H.sub.2 wherein Cp represents a cyclopentadienyl or alkylcyclopentadienyl radical; Rh represents a rhodium atom; P represents a phosphorus atom; R.sub.2 represents a hydrocarbon radical; H represents a hydrogen atom, in the presence of ultraviolet radiation to form a hydridoalkyl complex of the formula: CpRh[P(R.sub.2).sub.3 ](R.sub.1)H (b) reacting said hydridoalkyl complex with an organic halogenating agent such as a tetrahalomethane or a haloform of the formulas: CX'X''X'''X'''' or CHX'X''X''' wherein X', X'', X'", X"" represent halogens selected from bromine, iodine or chlorine atom, at a temperature in the range of about -60.degree. to -17.degree. C. to form the corresponding haloalkyl complex of step (a) having the formula: CpRhPMe.sub.3 RX; and, (c) reacting said haloalkyl complex formed in (b) with halogen (X.sub.2) at a temperature in the range of about -60.degree. to 25.degree. C. (i.e., ambient) to form a functional haloalkyl compound.

  20. Process for functionalizing alkanes

    DOE Patents [OSTI]

    Bergman, Robert G. (Kensington, CA); Janowicz, Andrew H. (Wilmington, DE); Periana-Pillai, Roy A. (Berkeley, CA)

    1985-01-01

    Process for functionalizing saturated hydrocarbons selectively in the terminal position comprising: (a) reacting said saturated hydrocarbons of the formula: RH where: H represents a hydrogen atom, and R represents a saturated hydrocarbon radical, with a metal complex of the formula: CpRhPMe.sub.3 H.sub.2 where: Cp represents a pentamethylated cyclopentadienyl radical, Rh represents a rhodium atom, P represents a phosphorous atom, Me represents a methyl group, H represents a hydrogen atom, in the presence of ultraviolet radiation at a temperature maintained at about -60.degree. to -17.degree. C. to form a hydridoalkyl complex of the formula: CpRhPMe.sub.3 RH (b) reacting said hydridoalkyl complex with a haloform of the formula: CHX.sub.3 where: X represents a bromine, iodine or chlorine atom, at a temperature in the range of about -60.degree. to -17.degree. C. to form the corresponding haloalkyl complex of step (a) having the formula: CpRhPMe.sub.3 RX; and, (c) reacting said haloalkyl complex formed in (b) with halogen (X.sub.2) at a temperature in the range of about -60.degree. to 25.degree. C. (i.e. ambient) to form a functional haloalkyl compound.

  1. Reforming The Government Hiring Process

    Broader source: Energy.gov [DOE]

    The Department of Energy explains efforts made to simplify the federal hiring process within the Department, complete with video.

  2. Cyber Security Process Requirements Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-08-12

    The Manual establishes the minimum implementation standards for cyber security management processes throughout the Department. No cancellation.

  3. Risk Management Process Overview | Department of Energy

    Energy Savers [EERE]

    Risk Management Process Overview Risk Management Process Overview figure depicting three tier risk management process The cybersecurity risk management process explained in the...

  4. Hylke van Dijk Democratic processing

    E-Print Network [OSTI]

    Hylke van Dijk Democratic processing #12;Democratic processing Mastering the complexity, in het openbaar te verdedigen op maandag 22 november 2004 om 13:00 uur door Hijlke Watze VAN DIJK Dijk, H.W. van Democratic processing: Mastering the complexity of communicating systems H.W. van Dijk

  5. Radioactive waste processing apparatus

    DOE Patents [OSTI]

    Nelson, R.E.; Ziegler, A.A.; Serino, D.F.; Basnar, P.J.

    1985-08-30

    Apparatus for use in processing radioactive waste materials for shipment and storage in solid form in a container is disclosed. The container includes a top, and an opening in the top which is smaller than the outer circumference of the container. The apparatus includes an enclosure into which the container is placed, solution feed apparatus for adding a solution containing radioactive waste materials into the container through the container opening, and at least one rotatable blade for blending the solution with a fixing agent such as cement or the like as the solution is added into the container. The blade is constructed so that it can pass through the opening in the top of the container. The rotational axis of the blade is displaced from the center of the blade so that after the blade passes through the opening, the blade and container can be adjusted so that one edge of the blade is adjacent the cylindrical wall of the container, to insure thorough mixing. When the blade is inside the container, a substantially sealed chamber is formed to contain vapors created by the chemical action of the waste solution and fixant, and vapors emanating through the opening in the container. The chamber may be formed by placing a removable extension over the top of the container. The extension communicates with the apparatus so that such vapors are contained within the container, extension and solution feed apparatus. A portion of the chamber includes coolant which condenses the vapors. The resulting condensate is returned to the container by the force of gravity.

  6. Non-traditional ProcessingNon traditional Processing ME 4210: Manufacturing Processes and Engineering

    E-Print Network [OSTI]

    Colton, Jonathan S.

    : Manufacturing Processes and Engineering Prof. J.S. Colton © GIT 2009 14 #12;Water Jet CuttingWater Jet Cutting://www.flowcorp.com/waterjet-resources.cfm?id=390 #12;Water Jet CuttingWater Jet Cutting ME 4210: Manufacturing Processes and Engineering Prof. J Jet CuttingWater Jet Cutting cake pwb fish ME 4210: Manufacturing Processes and Engineering Prof. J

  7. Processing module operating methods, processing modules, and communications systems

    DOE Patents [OSTI]

    McCown, Steven Harvey; Derr, Kurt W.; Moore, Troy

    2014-09-09

    A processing module operating method includes using a processing module physically connected to a wireless communications device, requesting that the wireless communications device retrieve encrypted code from a web site and receiving the encrypted code from the wireless communications device. The wireless communications device is unable to decrypt the encrypted code. The method further includes using the processing module, decrypting the encrypted code, executing the decrypted code, and preventing the wireless communications device from accessing the decrypted code. Another processing module operating method includes using a processing module physically connected to a host device, executing an application within the processing module, allowing the application to exchange user interaction data communicated using a user interface of the host device with the host device, and allowing the application to use the host device as a communications device for exchanging information with a remote device distinct from the host device.

  8. Process Integration Study of a Poultry Processing Plant 

    E-Print Network [OSTI]

    Meffert, W. A.

    1992-01-01

    stream_source_info ESL-IE-92-04-40.pdf.txt stream_content_type text/plain stream_size 18571 Content-Encoding ISO-8859-1 stream_name ESL-IE-92-04-40.pdf.txt Content-Type text/plain; charset=ISO-8859-1 PROCESS INTEGRATION... STUDY OF A POULTRY PROCESSING PLANT William A. Meffen, P.E. Research Engineer Georgia Tech Research Institute Atlanta, Georgia ABSTRACT This paper presents the results of a process integration study of a poultry processing plant. The Pinch...

  9. Process Improvement in Biotech : Dealing with High Complexity Processes

    E-Print Network [OSTI]

    Artzi, Hadas

    2009-01-01

    Across numerous conventional manufacturing sites, process improvement initiatives have been shown to increase production capabilities while decreasing costs - all without a required system- wide overhaul of the manufacturing ...

  10. Information Processing in Brain Microtubules

    E-Print Network [OSTI]

    Jean Faber; Renato Portugal; Luiz Pinguelli Rosa

    2005-01-18

    Models of the mind are based on the possibility of computing in brain microtubules. From this point of view, information processing is the fundamental issue for understanding the brain mechanisms that produce consciousness. The cytoskeleton polymers could store and process information through their dynamic coupling mediated by mechanical energy. We analyze the problem of information transfer and storage in brain microtubules, considering them as a communication channel. We discuss the implications of assuming that consciousness is generated by the subneuronal process.

  11. Process for making carbon foam

    DOE Patents [OSTI]

    Klett, James W. (Knoxville, TN)

    2000-01-01

    The process obviates the need for conventional oxidative stabilization. The process employs mesophase or isotropic pitch and a simplified process using a single mold. The foam has a relatively uniform distribution of pore sizes and a highly aligned graphic structure in the struts. The foam material can be made into a composite which is useful in high temperature sandwich panels for both thermal and structural applications.

  12. MGSC 485 Business Process Management Fall 2007 BUSINESS PROCESS MANAGEMENT

    E-Print Network [OSTI]

    Almor, Amit

    organizational change initiatives such as TQM, Business Process Reengineering, and Six-Sigma campaigns discussions. Students will learn and practice principles and techniques/tools of Lean and Six-Sigma Approach to business process improvements. This is in light of the pervasive implementations of six-sigma campaigns

  13. Process Efficiency Measurements in the Laser Engineered Net Shaping Process

    E-Print Network [OSTI]

    DuPont, John N.

    Process Efficiency Measurements in the Laser Engineered Net Shaping Process R.R. UNOCIC and J.N. DuPONT A study of laser energy transfer efficiency, melting efficiency, and deposition efficiency has been material. Measurements revealed that laser energy transfer efficiency ranged from 30 to 50 pct. Laser beam

  14. ORISE: Process and Program Evaluation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Process and Program Evaluation As an integral part of producing effective health and safety programs, the Oak Ridge Institute for Science and Education (ORISE) conducts...

  15. Process for preparing liquid wastes

    DOE Patents [OSTI]

    Oden, Laurance L. (Albany, OR); Turner, Paul C. (Albany, OR); O'Connor, William K. (Lebanon, OR); Hansen, Jeffrey S. (Corvallis, OR)

    1997-01-01

    A process for preparing radioactive and other hazardous liquid wastes for treatment by the method of vitrification or melting is provided for.

  16. SOLUTION-PROCESSED INORGANIC ELECTRONICS

    E-Print Network [OSTI]

    Bakhishev, Teymur

    2011-01-01

    Solution-Processed Graphene Electronics,” Nano Letters, vol.applications,” Organic Electronics, vol. 12, no. 2, pp. 249-design in organic electronics by dual-gate technology,” in

  17. Methane/nitrogen separation process

    DOE Patents [OSTI]

    Baker, R.W.; Lokhandwala, K.A.; Pinnau, I.; Segelke, S.

    1997-09-23

    A membrane separation process is described for treating a gas stream containing methane and nitrogen, for example, natural gas. The separation process works by preferentially permeating methane and rejecting nitrogen. The authors have found that the process is able to meet natural gas pipeline specifications for nitrogen, with acceptably small methane loss, so long as the membrane can exhibit a methane/nitrogen selectivity of about 4, 5 or more. This selectivity can be achieved with some rubbery and super-glassy membranes at low temperatures. The process can also be used for separating ethylene from nitrogen. 11 figs.

  18. Methane/nitrogen separation process

    DOE Patents [OSTI]

    Baker, Richard W. (Palo Alto, CA); Lokhandwala, Kaaeid A. (Menlo Park, CA); Pinnau, Ingo (Palo Alto, CA); Segelke, Scott (Mountain View, CA)

    1997-01-01

    A membrane separation process for treating a gas stream containing methane and nitrogen, for example, natural gas. The separation process works by preferentially permeating methane and rejecting nitrogen. We have found that the process is able to meet natural gas pipeline specifications for nitrogen, with acceptably small methane loss, so long as the membrane can exhibit a methane/nitrogen selectivity of about 4, 5 or more. This selectivity can be achieved with some rubbery and super-glassy membranes at low temperatures. The process can also be used for separating ethylene from nitrogen.

  19. FAQS Reference Guide- Chemical Processing

    Office of Energy Efficiency and Renewable Energy (EERE)

    This reference guide addresses the competency statements in the February 2010 edition of DOE-STD-1176-2010, Chemical Processing Functional Area Qualification Standard.

  20. Rapid thermal processing by stamping

    DOE Patents [OSTI]

    Stradins, Pauls; Wang, Qi

    2013-03-05

    A rapid thermal processing device and methods are provided for thermal processing of samples such as semiconductor wafers. The device has components including a stamp (35) having a stamping surface and a heater or cooler (40) to bring it to a selected processing temperature, a sample holder (20) for holding a sample (10) in position for intimate contact with the stamping surface; and positioning components (25) for moving the stamping surface and the stamp (35) in and away from intimate, substantially non-pressured contact. Methods for using and making such devices are also provided. These devices and methods allow inexpensive, efficient, easily controllable thermal processing.

  1. Cyber Security Process Requirements Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-08-12

    The Manual establishes the minimum implementation standards for cyber security management processes throughout the Department. No cancellation. Admin Chg 1 dated 9-1-09.

  2. Integrating Empirical-Modeling Approaches to Improve Understanding of Terrestrial Ecology Processes

    SciTech Connect (OSTI)

    McCarthy, Heather [University of Oklahoma; Luo, Yiqi [University of Oklahoma; Wullschleger, Stan D [ORNL

    2012-01-01

    Recent decades have seen tremendous increases in the quantity of empirical ecological data collected by individual investigators, as well as through research networks such as FLUXNET (Baldocchi et al., 2001). At the same time, advances in computer technology have facilitated the development and implementation of large and complex land surface and ecological process models. Separately, each of these information streams provides useful, but imperfect information about ecosystems. To develop the best scientific understanding of ecological processes, and most accurately predict how ecosystems may cope with global change, integration of empirical and modeling approaches is necessary. However, true integration - in which models inform empirical research, which in turn informs models (Fig. 1) - is not yet common in ecological research (Luo et al., 2011). The goal of this workshop, sponsored by the Department of Energy, Office of Science, Biological and Environmental Research (BER) program, was to bring together members of the empirical and modeling communities to exchange ideas and discuss scientific practices for increasing empirical - model integration, and to explore infrastructure and/or virtual network needs for institutionalizing empirical - model integration (Yiqi Luo, University of Oklahoma, Norman, OK, USA). The workshop included presentations and small group discussions that covered topics ranging from model-assisted experimental design to data driven modeling (e.g. benchmarking and data assimilation) to infrastructure needs for empirical - model integration. Ultimately, three central questions emerged. How can models be used to inform experiments and observations? How can experimental and observational results be used to inform models? What are effective strategies to promote empirical - model integration?

  3. Commercial-Scale Demonstration of the Liquid Phase Methanol (LPMEOH(TM)) Process

    SciTech Connect (OSTI)

    1997-09-30

    The Liquid Phase Methanol (LPMEOHT") demonstration project at Kingsport, Tennessee, is a $213.7 million cooperative agreement between the U.S. Department of Energy (DOE) and Air Products Liquid Phase Conversion Company, L. P. (the Partnership). Air Products and Chemicals, Inc. (Air Products) and Eastman Chemical Company (Eastman) formed the Partnership to execute the Demonstration Project. A demonstration unit producing 80,000 gallons per day (260 tons-per-day) of methanol from coal-derived synthesis gas (syngas) was designed, constructed, and is operating at a site located at the Eastman complex in Kingsport. The Partnership will own and operate the facility for the four-year demonstration period. This project is sponsored under the DOE's Clean Coal Technology Program, and its primary objective is to "demonstrate the production of methanol using the LPMEOWM Process in conjunction with an integrated coal gasification facility." The project will also demonstrate the suitability of the methanol produced for use as a chemical feedstock or as a low-sulfur dioxide, low-nitrogen oxides alternative fiel in stationary and transportation applications. The project may also demonstrate the production of dimethyl ether (DME) as a mixed coproduct with methanol, if laboratory- and pilot-scale research and market verification studies show promising results. If implemented, the DME would be produced during the last six months of the four-year demonstration period. The LPMEOITM process is the product of a cooperative development effort by Air Products and the DOE in a program that started in 1981. It was successfdly piloted at a 10 tons-per- day (TPD) rate in the DOE-owned experimental unit at Air Products' LaPorte, Texas, site. This demonstration project is the culmination of that extensive cooperative development effort.

  4. Commercial-Scale Demonstration of the Liquid Phase Methanol (LOMEOH(TM)) Process

    SciTech Connect (OSTI)

    1997-12-31

    The Liquid Phase Methanol (LPMEOH) Demonstration Project at Kingsport, Tennessee, is a $213.7 million effort being conducted under a cooperative agreement between the U.S. Department of Energy (DOE) and Air Products Liquid Phase Conversion Company, L.P. (the Partnership). Air Products and Chemicals, Inc. (Air Products) and Eastman Chemical Company (Eastman) formed the Partnership to execute the Demonstration Project. A demonstration unit producing 80,000 gallons per day (260 tons-per-day (TPD)) of methanol from coal-derived synthesis gas (syngas) was designed, constructed, and began a four-year operational period in April of 1997 at a site located at the Eastman complex in Kingsport. The Partnership will own and operate the facility for the four-year demonstration period. This project is sponsored under the DOE's Clean Coal Technology Program, and its primary objective is to "demonstrate the production of methanol using the LPMEOH?M Process in conjunction with an integrated coal gasification facility." The project will also demonstrate the suitability of the methanol produced for use as a chemical feedstock or as a low-sulfur dioxide, low-nitrogen oxides alternative fiel in stationary and transportation applications. The project may also demonstrate the production of dimethyl ether (DME) as a mixed coproduct with methanol, if laboratory- and pilot-scale research and market verification studies show promising results. If implemented, the DME would be produced during the last six months of the four-year demonstration period. The LPMEOJYM process is the product of a cooperative development effort by Air Products and the DOE in a program that started in 1981. It was successfidly piloted at a 10-TPD rate in the DOE-owned experimental unit at Air Products' LaPorte, Texas, site. This Demonstration Project is the culmination of that extensive cooperative development effort.

  5. The Edgewater Coolside process demonstration

    SciTech Connect (OSTI)

    McCoy, D.C.; Scandrol, R.O.; Statnick, R.M.; Stouffer, M.R.; Winschel, R.A.; Withum, J.A.; Wu, M.M.; Yoon, H. (CONSOL, Inc., Pittsburgh, PA (United States))

    1992-02-01

    The Edgewater Coolside process demonstration met the program objectives which were to determine Coolside SO[sub 2] removal performance, establish short-term process operability, and evaluate the economics of the process versus a limestone wet scrubber. On a flue gas produced from the combustion of 3% sulfur coal, the Coolside process achieved 70% SO[sub 2] removal using commercially-available hydrated lime as the sorbent. The operating conditions were Ca/S mol ratio 2.0, Na/Ca mol ratio 0.2, and 20[degree]F approach to adiabatic saturation temperature ([del]T). During tests using fresh plus recycle sorbent, the recycle sorbent exhibited significant capacity for additional SO[sub 2] removal. The longest steady state operation was eleven days at nominally Ca/S = 2, Na/Ca = 0.22, [del]T = 20--22[degree]F, and 70% SO[sub 2] removal. The operability results achieved during the demonstration indicate that with the recommended process modifications, which are discussed in the Coolside process economic analysis, the process could be designed as a reliable system for utility application. Based on the demonstration program, the Coolside process capital cost for a hypothetical commercial installation was minimized. The optimization consisted of a single, large humidifier, no spare air compressor, no isolation dampers, and a 15 day on-site hydrated lime storage. The levelized costs of the Coolside and the wet limestone scrubbing processes were compared. The Coolside process is generally economically competitive with wet scrubbing for coals containing up to 2.5% sulfur and plants under 350 MWe. Site-specific factors such as plant capacity factor, SO[sub 2] emission limit, remaining plant life, retrofit difficulty, and delivered sorbent cost affect the scrubber-Coolside process economic comparison.

  6. The Edgewater Coolside process demonstration

    SciTech Connect (OSTI)

    McCoy, D.C.; Scandrol, R.O.; Statnick, R.M.; Stouffer, M.R.; Winschel, R.A.; Withum, J.A.; Wu, M.M.; Yoon, H. [CONSOL, Inc., Pittsburgh, PA (United States)

    1992-02-01

    The Edgewater Coolside process demonstration met the program objectives which were to determine Coolside SO{sub 2} removal performance, establish short-term process operability, and evaluate the economics of the process versus a limestone wet scrubber. On a flue gas produced from the combustion of 3% sulfur coal, the Coolside process achieved 70% SO{sub 2} removal using commercially-available hydrated lime as the sorbent. The operating conditions were Ca/S mol ratio 2.0, Na/Ca mol ratio 0.2, and 20{degree}F approach to adiabatic saturation temperature ({del}T). During tests using fresh plus recycle sorbent, the recycle sorbent exhibited significant capacity for additional SO{sub 2} removal. The longest steady state operation was eleven days at nominally Ca/S = 2, Na/Ca = 0.22, {del}T = 20--22{degree}F, and 70% SO{sub 2} removal. The operability results achieved during the demonstration indicate that with the recommended process modifications, which are discussed in the Coolside process economic analysis, the process could be designed as a reliable system for utility application. Based on the demonstration program, the Coolside process capital cost for a hypothetical commercial installation was minimized. The optimization consisted of a single, large humidifier, no spare air compressor, no isolation dampers, and a 15 day on-site hydrated lime storage. The levelized costs of the Coolside and the wet limestone scrubbing processes were compared. The Coolside process is generally economically competitive with wet scrubbing for coals containing up to 2.5% sulfur and plants under 350 MWe. Site-specific factors such as plant capacity factor, SO{sub 2} emission limit, remaining plant life, retrofit difficulty, and delivered sorbent cost affect the scrubber-Coolside process economic comparison.

  7. Homologation process making higher alcohols

    DOE Patents [OSTI]

    Leung, Tak W. (Charleston, WV); Dombek, Bernard D. (Charleston, WV)

    1990-01-01

    A liquid phase process for the manufacture of C.sub.2+ alkanols by the reaction of hydrogen with carbon monoxide in the presence of a catalyst containing ruthenium, cobalt, a halide-containing compound, and an aromatic compound substituted in adjacent ring positions by nitrogen atoms. The process embraces the use of rhodium as an additive to the catalyst system.

  8. Three phase downhole separator process

    DOE Patents [OSTI]

    Cognata, Louis John (Baytown, TX)

    2008-06-24

    Three Phase Downhole Separator Process (TPDSP) is a process which results in the separation of all three phases, (1) oil, (2) gas, and (3) water, at the downhole location in the well bore, water disposal injection downhole, and oil and gas production uphole.

  9. Finance Support Unit Process: Receipts

    E-Print Network [OSTI]

    Su, Xiao

    Finance Support Unit Process: Receipts Module: CFS Receipts Overview This business process guide are required to be performed in CFS for purchase orders of itemized goods, printing orders, and Public Works. Commodity and service blanket purchase orders do not require a receipt to be entered in CFS; instead

  10. March 15, 1996 DECISION PROCESSES

    E-Print Network [OSTI]

    Group Inc. #12;A Process for Improving Energy Data Collection ARA and Dovetail Table of Contents Table Collection System #12;A Process for Improving Energy Data Collection 2 ARA and Dovetail INTRODUCTION produced a report entitled Industrial Energy Data Collection in Canada: Existing System and Proposed Future

  11. ARM PROCESSES AND MODELING METHODOLOGY

    E-Print Network [OSTI]

    ARM PROCESSES AND MODELING METHODOLOGY Benjamin Melamed Rutgers University Faculty of Management Department of MSIS 94 Rockafeller Rd. Piscataway, NJ 08854 melamed@rbs.rutgers.edu ABSTRACT ARM (Auto innovation sequences, ARM processes admit dependent innovation sequences as well, so long

  12. Process for producing chalcogenide semiconductors

    DOE Patents [OSTI]

    Noufi, R.; Chen, Y.W.

    1985-04-30

    A process for producing chalcogenide semiconductor material is disclosed. The process includes forming a base metal layer and then contacting this layer with a solution having a low pH and containing ions from at least one chalcogen to chalcogenize the layer and form the chalcogenide semiconductor material.

  13. Process for concentrated biomass saccharification

    DOE Patents [OSTI]

    Hennessey, Susan M. (Avondale, PA); Seapan, Mayis (Landenberg, PA); Elander, Richard T. (Evergreen, CO); Tucker, Melvin P. (Lakewood, CO)

    2010-10-05

    Processes for saccharification of pretreated biomass to obtain high concentrations of fermentable sugars are provided. Specifically, a process was developed that uses a fed batch approach with particle size reduction to provide a high dry weight of biomass content enzymatic saccharification reaction, which produces a high sugars concentration hydrolysate, using a low cost reactor system.

  14. Marine Ecological Processes Online section

    E-Print Network [OSTI]

    Hill, Jeffrey E.

    Marine Ecological Processes Online section FAS 4270 (3 credits) Fall 2012 Course Description The course covers the ecology of marine organisms and habitats with focus on how general ecological principles and those unique to the marine environment drive patterns and processes. Prerequisite: Two

  15. Assessment of advanced coal-gasification processes. [AVCO high throughput gasification in process; Bell High Mass Flux process; CS-R process; and Exxon Gasification process

    SciTech Connect (OSTI)

    McCarthy, J.; Ferrall, J.; Charng, T.; Houseman, J.

    1981-06-01

    This report represents a technical assessment of the following advanced coal gasification processes: AVCO High Throughput Gasification (HTG) Process, Bell Single - Stage High Mass Flux (HMF) Process, Cities Service/Rockwell (CS/R) Hydrogasification Process, and the Exxon Catalytic Coal Gasification (CCG) Process. Each process is evaluated for its potential to produce SNG from a bituminous coal. In addition to identifying the new technology these processes represent, key similarities/differences, strengths/weaknesses, and potential improvements to each process are identified. The AVCO HTG and the Bell HMF gasifiers share similarities with respect to: short residence time (SRT), high throughput rate, slagging and syngas as the initial raw product gas. The CS/R Hydrogasifier is also SRT but is non-slagging and produces a raw gas high in methane content. The Exxon CCG gasifier is a long residence time, catalytic fluidbed reactor producing all of the raw product methane in the gasifier.

  16. Process for making unsaturated hydrocarbons using microchannel process technology

    DOE Patents [OSTI]

    Tonkovich, Anna Lee (Dublin, OH); Yuschak, Thomas (Lewis Center, OH); LaPlante, Timothy J. (Columbus, OH); Rankin, Scott (Columbus, OH); Perry, Steven T. (Galloway, OH); Fitzgerald, Sean Patrick (Columbus, OH); Simmons, Wayne W. (Dublin, OH); Mazanec, Terry (Solon, OH) Daymo, Eric (Dublin, OH)

    2011-04-12

    The disclosed invention relates to a process for converting a feed composition comprising one or more hydrocarbons to a product comprising one or more unsaturated hydrocarbons, the process comprising: flowing the feed composition and steam in contact with each other in a microchannel reactor at a temperature in the range from about 200.degree. C. to about 1200.degree. C. to convert the feed composition to the product, the process being characterized by the absence of catalyst for converting the one or more hydrocarbons to one or more unsaturated hydrocarbons. Hydrogen and/or oxygen may be combined with the feed composition and steam.

  17. Academic Fiscal Administration Budget process-related

    E-Print Network [OSTI]

    Schaefer, Marcus

    to Inform TPC & Salary Planning Process (Sept/Oct ) Related Process Legend Fiscal Year Begins 7/1/XX FiscalAcademic Fiscal Administration Budget process-related Appraisal/Salary/Wage process-related New fiscal year process-related Tuition pricing process-related Tuition pricing/Salary/Wage process

  18. Process Monitoring for Nuclear Safeguards

    SciTech Connect (OSTI)

    Ehinger, Michael H [ORNL] [ORNL; Pomeroy, George D [ORNL] [ORNL; Budlong-Sylvester, Kory W [ORNL] [ORNL

    2009-01-01

    Process Monitoring has long been used to evaluate industrial processes and operating conditions in nuclear and non-nuclear facilities. In nuclear applications there is a recognized need to demonstrate the safeguards benefits from using advanced process monitoring on spent fuel reprocessing technologies and associated facilities, as a complement to nuclear materials accounting. This can be accomplished by: defining credible diversion pathway scenarios as a sample problem; using advanced sensor and data analysis techniques to illustrate detection capabilities; and formulating 'event detection' methodologies as a means to quantify performance of the safeguards system. Over the past 30 years there have been rapid advances and improvement in the technology associated with monitoring and control of industrial processes. In the context of bulk handling facilities that process nuclear materials, modern technology can provide more timely information on the location and movement of nuclear material to help develop more effective safeguards. For international safeguards, inspection means verification of material balance data as reported by the operator through the State to the international inspectorate agency. This verification recognizes that the State may be in collusion with the operator to hide clandestine activities, potentially during abnormal process conditions with falsification of data to mask the removal. Records provided may show material is accounted for even though a removal occurred. Process monitoring can offer additional fidelity during a wide variety of operating conditions to help verify the declaration or identify possible diversions. The challenge is how to use modern technology for process monitoring and control in a proprietary operating environment subject to safeguards inspectorate or other regulatory oversight. Under the U.S. National Nuclear Security Administration's Next Generation Safeguards Initiative, a range of potential safeguards applications for process monitoring are under conceptual development and evaluation. This paper reports on a study of process monitoring for a sample problem involving spent fuel reprocessing with aqueous reprocessing technologies. This includes modeling the processes in the context of a nuclear material diversion scenario and measuring the associated process chemistry. A systems-centric model is applied using actual and simulated plant data, advanced sensors, anomaly detection methods, statistical analysis and data authentication methods, to help illustrate the benefits of process monitoring applications.

  19. The Role of the Flexicoking Process in Heavy Oil Processing 

    E-Print Network [OSTI]

    Taylor, R. I.

    1980-01-01

    conversion, the FLEXICOKING process can also be used as the primary technology for Stand Alone Energy Centers upgrading low quality, high metals, heavy crudes. These efficient energy centers can be located either at a heavy oil production field or integrated...

  20. Process for separating nitrogen from methane using microchannel process technology

    DOE Patents [OSTI]

    Tonkovich, Anna Lee (Marysville, OH); Qiu, Dongming (Dublin, OH); Dritz, Terence Andrew (Worthington, OH); Neagle, Paul (Westerville, OH); Litt, Robert Dwayne (Westerville, OH); Arora, Ravi (Dublin, OH); Lamont, Michael Jay (Hilliard, OH); Pagnotto, Kristina M. (Cincinnati, OH)

    2007-07-31

    The disclosed invention relates to a process for separating methane or nitrogen from a fluid mixture comprising methane and nitrogen, the process comprising: (A) flowing the fluid mixture into a microchannel separator, the microchannel separator comprising a plurality of process microchannels containing a sorption medium, the fluid mixture being maintained in the microchannel separator until at least part of the methane or nitrogen is sorbed by the sorption medium, and removing non-sorbed parts of the fluid mixture from the microchannel separator; and (B) desorbing the methane or nitrogen from the sorption medium and removing the desorbed methane or nitrogen from the microchannel separator. The process is suitable for upgrading methane from coal mines, landfills, and other sub-quality sources.