Powered by Deep Web Technologies
Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Hydroconversion of heavy oils. [Residue of tar sand bitumen distillation  

SciTech Connect (OSTI)

A method is described for hydroconversion of feedstocks consisting essentially of at least one heavy hydrocarbon oil selected from the group consisting of residue of petroleum oil distillation and the residue of tar sand bitumen distillation to enhance the recovery of 350/sup 0/-650/sup 0/F boiling product fraction. The method comprises treating such feed stock with hydrogen at superatmospheric pressure and in the presence of finely divided active hydrogenation catalyst in consecutive reaction stages. An initial reaction stage is carried out at a temperature in the range of 780/sup 0/-825/sup 0/F, and a subsequent reaction stage is directly carried out after the initial reaction stage at a higher temperature in the range of 800/sup 0/F-860/sup 0/F, the temperature of the subsequent reaction stage being at least 20/sup 0/F higher than that of the initial reaction stage.

Garg, D.

1986-08-19T23:59:59.000Z

2

Table A3. Refiner/Reseller Prices of Distillate and Residual...  

Gasoline and Diesel Fuel Update (EIA)

A3. RefinerReseller Prices of Distillate and Residual Fuel Oils, by PAD District, 1983-Present (Cents per Gallon Excluding Taxes) Geographic Area Year No. 1 Distillate No. 2...

3

Table A3. Refiner/Reseller Prices of Distillate and Residual...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Marketing Annual 1999 441 Table A3. RefinerReseller Prices of Distillate and Residual Fuel Oils, by PAD District, 1983-Present (Cents per Gallon Excluding Taxes) - Continued...

4

Advancing Biorefining of Distillers Grain and Corn Stover Blends  

Broader source: Energy.gov (indexed) [DOE]

pretreatment process for distiller's grains and corn stover to convert residual starch, cellulose, and hemicellulose to ethanol and high- converting residual starch in order to...

5

Fractional distillation of natural gasoline by means of a modified Podbielniak apparatus  

E-Print Network [OSTI]

UTION Natural gasoline has long fulfilled a great need as a blending agent with heavier aotor fuels? However its use hae been linite4 to inoreasing the volatility of the heavier fuel. If a arne eaapleto knowledge of tho oheaieal constitution of natuxal 6...)aster is seoond to its anti knock inportenoo It is doubtful that is~a, whish has a C. F. R. xating of 100~ and whish is uee4 as a referenoe fuel 1 for neasurenont of anti-hnocdc values of other fuels, ie present in laxge Ruantities in natuxal gnsoiines...

Toombs, Alfred John Lawrence

1939-01-01T23:59:59.000Z

6

Catalytic Distillation  

E-Print Network [OSTI]

removing both will occur in the temperature range ne~ded high and low boilers to maintain the tower for reaction. One limitation may be .I the composition profile, exothermic reactions critical point of the system, above w~ich can be easily temperature... with significantly less energy. There are two primary reasons for energy reduction: 1. The heat of reaction for exothermic reactions is fully re covered as useful boilup for fractionation. 2. Fewer attendant distillations are normally required than for a...

Smith, L. A., Jr.; Hearn, D.; Wynegar, D. P.

1984-01-01T23:59:59.000Z

7

Natural Gamma Emitters after a Selective Chemical Separation of a TENORM residue: Preliminary Results  

SciTech Connect (OSTI)

An analytical procedure was established in order to obtain selective fractions containing radium isotopes ({sup 228}Ra), thorium ({sup 232}Th), and rare earths from RETOTER (REsiduo de TOrio e TErras Raras), a solid residue rich in rare earth elements, thorium isotopes and small amount of natural uranium generated from the operation of a thorium pilot plant for purification and production of pure thorium nitrate at IPEN -CNEN/SP. The paper presents preliminary results of {sup 228}Ra, {sup 226}Ra, {sup 238}U, {sup 210}Pb, and {sup 40}K concentrations in the selective fractions and total residue determined by high-resolution gamma spectroscopy, considering radioactive equilibrium of the samples.

Alves de Freitas, Antonio; Abrao, Alcidio [Centro de Quimica e do Meio Ambiente (Brazil); Godoy dos Santos, Adir Janete; Pecequilo, Brigitte Roxana Soreanu [Centro de Metrologia das Radiacoes Instituto de Pesquisas Energeticas e Nucleares Av. Prof. Lineu Prestes, 2242-Cidade Universitaria-Zip Code 05508-000 Sao Paulo-SP (Brazil)

2008-08-07T23:59:59.000Z

8

Vacuum Distillation  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S. NaturalA. Michael SchaalNovember1. Foreign sales of uraniumE. GreatVENTURADay)

9

INNOVATION EDUCATION EXCELLENCE DISTILLATIONS  

E-Print Network [OSTI]

INNOVATION · EDUCATION · EXCELLENCE DISTILLATIONS University of Toronto CHEMISTRY ALUMNI MAGAZINE.utoronto.ca / distillations 2012 MessagefromtheChair Our Department of Chemistry has one of the finest collection of peo- ple to a better, more sustain- able future. This issue of Distillations highlights the accomplishments last year

Chan, Hue Sun

10

Advanced Distillation Final Report  

SciTech Connect (OSTI)

The Advanced Distillation project was concluded on December 31, 2009. This U.S. Department of Energy (DOE) funded project was completed successfully and within budget during a timeline approved by DOE project managers, which included a one year extension to the initial ending date. The subject technology, Microchannel Process Technology (MPT) distillation, was expected to provide both capital and operating cost savings compared to conventional distillation technology. With efforts from Velocys and its project partners, MPT distillation was successfully demonstrated at a laboratory scale and its energy savings potential was calculated. While many objectives established at the beginning of the project were met, the project was only partially successful. At the conclusion, it appears that MPT distillation is not a good fit for the targeted separation of ethane and ethylene in large-scale ethylene production facilities, as greater advantages were seen for smaller scale distillations. Early in the project, work involved flowsheet analyses to discern the economic viability of ethane-ethylene MPT distillation and develop strategies for maximizing its impact on the economics of the process. This study confirmed that through modification to standard operating processes, MPT can enable net energy savings in excess of 20%. This advantage was used by ABB Lumus to determine the potential impact of MPT distillation on the ethane-ethylene market. The study indicated that a substantial market exists if the energy saving could be realized and if installed capital cost of MPT distillation was on par or less than conventional technology. Unfortunately, it was determined that the large number of MPT distillation units needed to perform ethane-ethylene separation for world-scale ethylene facilities, makes the targeted separation a poor fit for the technology in this application at the current state of manufacturing costs. Over the course of the project, distillation experiments were performed with the targeted mixture, ethane-ethylene, as well as with analogous low relative volatility systems: cyclohexane-hexane and cyclopentane-pentane. Devices and test stands were specifically designed for these efforts. Development progressed from experiments and models considering sections of a full scale device to the design, fabrication, and operation of a single-channel distillation unit with integrated heat transfer. Throughout the project, analytical and numerical models and Computational Fluid Dynamics (CFD) simulations were validated with experiments in the process of developing this platform technology. Experimental trials demonstrated steady and controllable distillation for a variety of process conditions. Values of Height-to-an-Equivalent Theoretical Plate (HETP) ranging from less than 0.5 inch to a few inches were experimentally proven, demonstrating a ten-fold performance enhancement relative to conventional distillation. This improvement, while substantial, is not sufficient for MPT distillation to displace very large scale distillation trains. Fortunately, parallel efforts in the area of business development have yielded other applications for MPT distillation, including smaller scale separations that benefit from the flowsheet flexibility offered by the technology. Talks with multiple potential partners are underway. Their outcome will also help determine the path ahead for MPT distillation.

Maddalena Fanelli; Ravi Arora; Annalee Tonkovich; Jennifer Marco; Ed Rode

2010-03-24T23:59:59.000Z

11

Distillation: The Efficient Workhorse  

E-Print Network [OSTI]

DISTILLATION: THE EFFICIENT WORKHORSE Dan Steinmeyer Monsanto Company St. Louis, Missouri Distillation is inherently highly efficient: phase separation is clean it is relatively easy to build a mUltistage countercurrent device equilibrium... of separation to the work pmbedded in the reboiler and condenser thermal flows. The right application is one where the streams ? separated both exceed la' of the feed, relative volatility exceeds 1.2, and separation is complete - i.e. pure products...

Steinmeyer, D.

12

Energy efficient distillation apparatus  

SciTech Connect (OSTI)

An energy efficient distillation method is provided which is particularly adapted for use on a dairy farm, and which comprises a distilland evaporating receptacle, a distillate condensing receptacle, and a conduit interconnecting the evaporating receptacle and the condensing receptacle. A vacuum pump is provided for drawing a partial vacuum within the evaporating receptacle, and a vapor compression refrigeration system is provided which includes condenser coils disposed to heat and vaporize the distilland while it is within the evaporating receptacle, and evaporator coils for cooling and condensing the vaporized distilland in the condensing receptacle. A cooling distribution system is also provided whereby a variable portion of the cooling potential of the refrigeration system may be selectively directed to each of the condensing receptacle, a distillate receiver tank, or to a bulk milk container as utilized on a dairy farm or the like.

Melton, J.D.

1982-08-17T23:59:59.000Z

13

Reflux for multifeed distillation  

SciTech Connect (OSTI)

Prior investigations have shown ways to determine minimum reflux for multicomponent distillation. This work extends earlier concepts in order to handle multifeeds. Reflux calculations for each feed, as though it were the only feed, are factored with the reflux effects of the other feeds to give an overall minimum reflux. Each factor has a finite value depending on the composition and thermal quality of the feed it represents.

Chou, S.M.; Yaws, C.L.

1986-12-01T23:59:59.000Z

14

Low Energy Distillation Schemes  

E-Print Network [OSTI]

an important means of reducing energy consumption in distillation processes. However, its conventional use requires the installation of piping (and pipes carrying vapour streams tend to be of large diameter and are consequently expensive). So, finally we.... However, its conventional use requires the installation of piping (and pipes carrying vapour streams tend to be of large diameter and are consequently expensive). In the late eighties engineers in Germany [e.g. Kaibel, 1987] looked at one way in which...

Polley, G. T.

15

Oil recovery from condensed corn distillers solubles.  

E-Print Network [OSTI]

??Condensed corn distillers solubles (CCDS) contains more oil than dried distillers grains with solubles (DDGS), 20 vs. 12% (dry weight basis). Therefore, significant amount of… (more)

Majoni, Sandra

2009-01-01T23:59:59.000Z

16

Optimal Control of Distillation Systems  

E-Print Network [OSTI]

The optimum performance of a distillation system can be evaluated by examining the product purities, the product recoveries, and the system's capability to respond to small or large, expected or unexpected, plant disturbances. An optimal control...

Chatterjee, N.; Suchdeo, S. R.

1984-01-01T23:59:59.000Z

17

SRC Residual fuel oils  

DOE Patents [OSTI]

Coal solids (SRC) and distillate oils are combined to afford single-phase blends of residual oils which have utility as fuel oils substitutes. The components are combined on the basis of their respective polarities, that is, on the basis of their heteroatom content, to assure complete solubilization of SRC. The resulting composition is a fuel oil blend which retains its stability and homogeneity over the long term.

Tewari, Krishna C. (Whitehall, PA); Foster, Edward P. (Macungie, PA)

1985-01-01T23:59:59.000Z

18

Computation Of The Residual Radionuclide Activity Within Three Natural Waterways At The Savannah River Site  

SciTech Connect (OSTI)

In 2010 a Composite Analysis (CA) of the U.S. Department of Energy’s (DOE’s) Savannah River Site (SRS) was completed. This investigation evaluated the dose impact of the anticipated SRS End State residual sources of radionuclides to offsite members of the public. Doses were assessed at the locations where SRS site streams discharge into the Savannah River at the perimeter of the SRS. Although the model developed to perform this computation indicated that the dose constraint of 0.3 mSv/yr (30 mrem/yr), associated with CA, was not approached at the Points of Assessment (POAs), a significant contribution to the total computed dose was derived from the radionuclides (primarily Cs-137) bound-up in the soil and sediment of the drainage corridors of several SRS streams. DOE’s Low Level Waste Federal Review Group (LFRG) reviewed the 2010 CA and identified several items to be addressed in the SRS Maintenance Program. One of the items recognized Cs-137 in the Lower Three Runs (LTR) Integrator Operable Unit (IOU), as a significant CA dose driver. The item made the recommendation that SRS update the estimated radionuclide inventory, including Cs-137, in the LTR IOU. That initial work has been completed and its radionuclide inventory refined. There are five additional streams at SRS and the next phase of the response to the LFRG concern was to obtain a more accurate inventory and distribution of radionuclides in three of those streams, Fourmile Branch (FMB), Pen Branch (PB) and Steel Creek (SC). Each of these streams is designated as an IOU, which are defined for the purpose of this investigation as the surface water bodies and associated wetlands, including the channel sediment, floodplain sed/soil, and related biota. If present, radionuclides associated with IOUs are adsorbed to the streambed sediment and soils of the shallow floodplains that lie immediately adjacent to stream channels. The scope of this effort included the evaluation of any previous sampling and analysis data that had been collected for various SRS investigations, as well as the additional streambed and floodplain sampling and analysis data acquired more recently as part of the ongoing SRS IOU program, and associated specifically with the FMB, PB, and SC IOUs. Samples have been acquired along the waterways, within the stream channels themselves and in the adjacent floodplain zones. While Cs-137 is the most significant and abundant radionuclide associated with the SRS waterways, it is not the only radionuclide, hence work was conducted to evaluate all radionuclides present.

Hiergesell, R. A.; Phifer, M. A.

2014-01-07T23:59:59.000Z

19

Fractionation studies on the unidentified growth factor(s) in distillers dried solubles  

E-Print Network [OSTI]

. This was called "methyl aloohol soluble fraction of distillers dried solublesi The residue wss air drie4 and labeled "aetna 1 alcohol insoluble fraotion of distillers drie4 solubles". $. r fo m at nt ist e i o ubl s Five hundred gm of distillexs dried... fraction ox Ms- tillers Cried solubles (pH 1)"L "water soluole fr~ction of distillers dried solubles (PH '/)"L ~ "water soluble fxaction of dis~illers dried solubles (pH 11)". ur h r Pra tionatio f th Sate 8 lub e }raut of 9 still rs ed Soluo es a...

Dannenburg, Warren Nathaniel

1955-01-01T23:59:59.000Z

20

Distilling entanglement from arbitrary resources  

E-Print Network [OSTI]

We obtain the general formula for the optimal rate at which singlets can be distilled from any given noisy and arbitrarily correlated entanglement resource, by means of local operations and classical communication (LOCC). Our formula, obtained by employing the quantum information spectrum method, reduces to that derived by Devetak and Winter, in the special case of an i.i.d. resource. The proofs rely on a one-shot version of the so-called "hashing bound," which in turn provides bounds on the one-shot distillable entanglement under general LOCC.

Francesco Buscemi; Nilanjana Datta

2010-10-15T23:59:59.000Z

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Corrosion inhibition for distillation apparatus  

DOE Patents [OSTI]

Tower material corrosion in an atmospheric or sub-atmospheric distillation tower in a coal liquefaction process is reduced or eliminated by subjecting chloride-containing tray contents to an appropriate ion-exchange resin to remove chloride from such tray contents materials.

Baumert, Kenneth L. (Emmaus, PA); Sagues, Alberto A. (Lexington, KY); Davis, Burtron H. (Georgetown, KY); Schweighardt, Frank K. (Upper Macungie, PA)

1985-01-01T23:59:59.000Z

22

Optimal distillation using thermodynamic geometry Bjarne Andresen  

E-Print Network [OSTI]

(temperature, pressure, etc.) define successive states in a sequence of equilibria. Fractional distillation [2Optimal distillation using thermodynamic geometry Bjarne Andresen Ørsted Laboratory, University of a distillation column may be improved by permitting heat exchange on every tray rather than only in the reboiler

Salamon, Peter

23

Momentive Performance Materials Distillation Intercharger  

E-Print Network [OSTI]

Presenter: Nicki (Collins) Boucher Project Team: T. Baisley, C. Beers, R. Cameron, K. Holman, T. Kotkoskie, K. Norris Momentive Performance Materials Inc. Waterford, NY May 23, 2013 Industrial Energy Technology Conference ACC Responsible... Care? Energy Efficiency Program Momentive Performance Materials Distillation Interchanger ESL-IE-13-05-20 Proceedings of the Thrity-Fifth Industrial Energy Technology Conference New Orleans, LA. May 21-24, 2013 Copyright 2013 Momentive Performance...

Boucher, N.; Baisley, T.; Beers, C.; Cameron, R.; Holman, K.; Kotkoskie, T.; Norris, K.

2013-01-01T23:59:59.000Z

24

Rank three bipartite entangled states are distillable  

E-Print Network [OSTI]

We prove that the bipartite entangled state of rank three is distillable. So there is no rank three bipartite bound entangled state. By using this fact, We present some families of rank four states that are distillable. We also analyze the relation between the low rank state and the Werner state.

Lin Chen; Yi-Xin Chen

2008-03-07T23:59:59.000Z

25

Locally Accessible Information and Distillation of Entanglement  

E-Print Network [OSTI]

A new type of complementary relation is found between locally accessible information and final average entanglement for given ensemble. It is also shown that in some well known distillation protocol, this complementary relation is optimally satisfied. We discuss the interesting trade-off between locally accessible information and distillable entanglement for some states.

Sibasish Ghosh; Pramod Joag; Guruprasad Kar; Samir Kunkri; Anirban Roy

2004-03-18T23:59:59.000Z

26

Forpeerreview Synthesis of Complex Thermally Coupled Distillation  

E-Print Network [OSTI]

US energy consumption, which is equivalent to 2.87x10 18 J (2.87 million TJ) per year, or to a power; Divided Wall Column; Superstructure optimization; GDP. Introduction Distillation is one of the most limitations. Distillation columns use very large amounts of energy because the evaporation steps involved

Grossmann, Ignacio E.

27

Distillability of entanglement in accelerated frames  

E-Print Network [OSTI]

We study the entanglement distillability of bipartite mixed states of two modes of a free Dirac field as seen by two relatively accelerated parties. It is shown that there are states that will change from distillable into separable for a certain value of acceleration. We exemplify these criteria in the context of Werner states.

Shahpoor Moradi

2012-01-02T23:59:59.000Z

28

New Design Methods and Algorithms for Multi-component Distillation...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

New Design Methods and Algorithms for Multi-component Distillation Processes New Design Methods and Algorithms for Multi-component Distillation Processes multicomponent.pdf More...

29

acrobat distiller job: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 September 1999 Distillation Theory. by Ivar J. Halvorsen and Sigurd, Norway 12;2 DistillationTheory.fm 2 September 1999 Table of Contents Introduction . . . . ....

30

Distillation: Still towering over other options  

SciTech Connect (OSTI)

Distillation dominates separations in the chemical process industries (CPI), at least for mixtures that normally are processed as liquids. The authors fully expect that distillation will continue to be the method of choice for many separations, and the method against which other options must be compared. So, in this article, they will put into some perspective just why distillation continues to reign as the king of separations, and what steps are being taken to improve its applicability and performance, as well as basic understanding of the technique.

Kunesh, J.G. [Fractionation Research, Inc., Stillwater, OK (United States); Kister, H.Z. [Brown and Root, Inc., Alhambra (Canada); Lockett, M.J. [Praxair, Inc., Tonawanda, NY (United States); Fair, J.R. [Univ. of Texas, Austin, TX (United States)

1995-10-01T23:59:59.000Z

31

Development of energy efficient membrane distillation systems  

E-Print Network [OSTI]

Membrane distillation (MD) has shown potential as a means of desalination and water purification. As a thermally driven membrane technology which runs at relatively low pressure, which can withstand high salinity feed ...

Summers, Edward K

2013-01-01T23:59:59.000Z

32

Minimizing corrosion in coal liquid distillation  

DOE Patents [OSTI]

In an atmospheric distillation tower of a coal liquefaction process, tower materials corrosion is reduced or eliminated by introduction of boiling point differentiated streams to boiling point differentiated tower regions.

Baumert, Kenneth L. (Emmaus, PA); Sagues, Alberto A. (Lexington, KY); Davis, Burtron H. (Georgetown, KY)

1985-01-01T23:59:59.000Z

33

Absorptive Recycle of Distillation Waste Heat  

E-Print Network [OSTI]

condenser operates above ambient temperature, the rejected heat also contains unused availability. By incorporating an absorption heat pump (AHP) into the distillation process, these sources of unused availability can be tapped so as to recycle (and hence...

Erickson, D. C.; Lutz, E. J., Jr.

1982-01-01T23:59:59.000Z

34

An improved model for multiple effect distillation  

E-Print Network [OSTI]

Increasing global demand for fresh water is driving research and development of advanced desalination technologies. As a result, a detailed model of multiple effect distillation (MED) is developed that is flexible, simple ...

Mistry, Karan H.

35

Complex Fluid Analysis with the Advanced Distillation Curve Approach  

E-Print Network [OSTI]

of a complex fluid is a graph of boiling temperature versus volume fraction distilled, a procedure embodied for each distillate fraction (for both qualitative and quantitative analysis); (2) temperature measurements) an assessment of the energy content of each distillate fraction; (6) trace chemical analysis of each distillate

36

TREATMENT OF HYDROCARBON, ORGANIC RESIDUE AND PRODUCTION CHEMICAL DAMAGE MECHANISMS THROUGH THE APPLICATION OF CARBON DIOXIDE IN NATURAL GAS STORAGE WELLS  

SciTech Connect (OSTI)

Core specimens and several material samples were collected from two natural gas storage reservoirs. Laboratory studies were performed to characterize the samples that were believed to be representative of a reservoir damage mechanism previously identified as arising from the presence of hydrocarbons, organic residues or production chemicals. A series of laboratory experiments were performed to identify the sample materials, use these materials to damage the flow capacity of the core specimens and then attempt to remove or reduce the induced damage using either carbon dioxide or a mixture of carbon dioxide and other chemicals. Results of the experiments showed that pure carbon dioxide was effective in restoring flow capacity to the core specimens in several different settings. However, in settings involving asphaltines as the damage mechanism, both pure carbon dioxide and mixtures of carbon dioxide and other chemicals provided little effectiveness in damage removal.

Lawrence J. Pekot; Ron Himes

2004-05-31T23:59:59.000Z

37

An evaluation of the potential end uses of a Utah tar sand bitumen. [Tar sand distillate  

SciTech Connect (OSTI)

To date the commercial application of tar sand deposits in the United States has been limited to their use as paving materials for county roads, parking lots, and driveways because the material, as obtained from the quarries, does not meet federal highway specifications. The bitumen in these deposits has also been the subject of upgrading and refining studies to produce transportation fuels, but the results have not been encouraging from an economic standpoint. The conversion of tar sand bitumen to transportation fuels cannot compete with crude oil refining. The purposes of this study were two-fold. The first was to produce vacuum distillation residues and determine if their properties met ASTM asphalt specifications. The second was to determine if the distillates could serve as potential feedstocks for the production of aviation turbine fuels. The bitumen used for this study was the oil produced during an in situ steamflood project at the Northwest Asphalt Ridge (Utah) tar sand deposit. Two distillation residues were produced, one at +316/sup 0/C and one at +399/sup 0/C. However, only the lower boiling residue met ASTM specifications, in this case as an AC-30 asphalt. The original oil sample met specifications as an AC-5 asphalt. These residue samples showed some unique properties in the area of aging; however, these properties need to be investigated further to determine the implications. It was also suggested that the low aging indexes and high flow properties of the asphalts may be beneficial for pavements that require good low-temperature performance. Two distillate samples were produced, one at IBP-316/sup 0/C and one at IBP-399/sup 0/C. The chemical and physical properties of these samples were determined, and it was concluded that both samples appear to be potential feedstocks for the production of aviation turbine fuels. However, hydrogenation studies need to be conducted and the properties of the finished fuels determined to verify the prediction. 14 refs., 12 tabs.

Thomas, K.P.; Harnsberger, P.M.; Guffey, F.D.

1986-09-01T23:59:59.000Z

38

Table 50. Prime Supplier Sales Volumes of Distillate Fuel Oils...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

50. Prime Supplier Sales Volumes of Distillate Fuel Oils and Kerosene by PAD District and State (Thousand Gallons per Day) Geographic Area Month Kerosene No. 1 Distillate No. 2...

39

Desalination Using Vapor-Compression Distillation  

E-Print Network [OSTI]

and MSF, this research investigates a high-efficiency mechanical vapor-compression distillation system that employs an improved water flow arrangement. The incoming salt concentration was 0.15% salt for brackish water and 3.5% salt for seawater, whereas...

Lubis, Mirna R.

2010-07-14T23:59:59.000Z

40

Complex Distillation Arrangements : Extending the Petlyuk Ideas  

E-Print Network [OSTI]

to distillation columns ac- count for roughly 3 of the total energy consumption in the U.S. (Ognisty 1995 to reduce energy consumption at least two alternative approaches have been proposed both in the literature is also known as the Petlyuk column, due to a theoretical study of Pet- lyuk et al. (1965), or as a fully

Skogestad, Sigurd

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Minimum Energy Diagrams for Multieffect Distillation Arrangements  

E-Print Network [OSTI]

and the energy use from this process accounts for an estimated 3% of the world energy consumption.1 With rising on the overall plant energy consumption. The use of heat integration combined with complex config- urations distillation ar- rangements. An easy form of comparison for energy consumption is the minimum vapor flow rate

Skogestad, Sigurd

42

Naphthenic acid corrosion in crude distillation units  

SciTech Connect (OSTI)

This paper summarizes corrosion experience in crude distillation units processing highly naphthenic California crude oils. Correlations have been developed relating corrosion rates to temperature and total acid number. There is a threshold acid number in the range of 1.5 to 2 mg KOH/g below which corrosion is minimal. High concentrations of hydrogen sulfide may raise this threshold value.

Piehl, R.L.

1988-01-01T23:59:59.000Z

43

Distillation: Present Status and Future Directions  

E-Print Network [OSTI]

-pressure steam as a heat source. The steam has, very likely, been sent through one or more users (turbi ne dri ves) before reaching the distillation reboiler. It seems almost characteristic of large chemical and refining complexes that there is a chronic...

Fair, J. R.; Humphrey, J. L.

1984-01-01T23:59:59.000Z

44

Construction and operation of a flash distillation apparatus  

E-Print Network [OSTI]

, Calibration Data of Orifioe ~, i, . ~ ~ ~ . ~ ~ . ~ 13 III. Equilibrium Data of Ethanol-Eater Mixtures . ~ * ~ ~ , 17 IV, . Flash Vaporieation Data of Ethanol Hater hIlxtures& + , 18 VI ~ Hempel Distillation of Oklahoma City Crude ~ . . . Flash... Vaporiration of Oklahoma City Crude ~ . ~ 21 22 VII' Hempel Distillations of Flash Distillates of Oklahoma City Crude . ~ ~ ~ ~ ~ ~ ~ i ~ ~ ~ ~ ~ ~ ~ ~ 24 VIII+ Hompel Distillations of Flash Residuums of Oklahoma City Crude ~ ~ ~ ~ ~ i ~ ~ o...

Knezevich, Milan

2012-06-07T23:59:59.000Z

45

Integrated C3 Feedstock and Aggregated Distillation Model for  

E-Print Network [OSTI]

Polypropylene Propane return Reactor effluent Distillation Polymerization FeedTank Propylene (91%) Goal: Select rates Constraints on composition of Propane Return, Distillation Overhead & Reactor Feed Limits Distillation Model Relates overhead composition of propane with flowrate of propane feed to the splitter

Grossmann, Ignacio E.

46

Asymptotic adaptive bipartite entanglement distillation protocol Erik Hostens,  

E-Print Network [OSTI]

to infinity. We call such protocols asymp- totic and the fraction of distilled Bell states per initial copy#12;#12;Asymptotic adaptive bipartite entanglement distillation protocol Erik Hostens, Jeroen: July 13, 2006) We present a new asymptotic bipartite entanglement distillation protocol

47

DYNAMICS AND CONTROL OF DISTILLATION COLUMNS -A CRITICAL SURVEY  

E-Print Network [OSTI]

: 47-7-594080 Figure 1: Typical simple distillation column. zF, yD and xB are mole fractions. tureDYNAMICS AND CONTROL OF DISTILLATION COLUMNS - A CRITICAL SURVEY Sigurd Skogestad Chemical cation and Control, 18, 177-217, 1997. Abstract Distillation column dynamics and control has been viewed

Skogestad, Sigurd

48

Effect of Number of Fractionating Trays on Reactive Distillation Performance  

E-Print Network [OSTI]

Effect of Number of Fractionating Trays on Reactive Distillation Performance Muhammad A. Al and rectifying sec- tions of a reacti®e distillation column can degrade performance. This effect, if true®e distillation columns cannot use conser®ati®e estimates of tray numbers, that is, we cannot simply add excess

Al-Arfaj, Muhammad A.

49

DYNAMICS AND CONTROL OF DISTILLATION COLUMNS A CRITICAL SURVEY  

E-Print Network [OSTI]

distillation column. z F , yD and xB are mole fractions. ture review, but a few new ideas are also presentedDYNAMICS AND CONTROL OF DISTILLATION COLUMNS ­ A CRITICAL SURVEY Sigurd Skogestad \\Lambda Chemical, Identification and Control, 18, 177­217, 1997. Abstract Distillation column dynamics and control has been viewed

Skogestad, Sigurd

50

Model Predictive Control of a Kaibel Distillation Column  

E-Print Network [OSTI]

column with model predictive control (MPC). A Kaibel distillation column has several advantages comparedModel Predictive Control of a Kaibel Distillation Column Martin Kvernland Ivar Halvorsen Sigurd only a single column shell. The distillation process is a multivariable process which leads

Skogestad, Sigurd

51

RIS0-M-2319 RISK ANALYSIS OF A DISTILLATION UNIT  

E-Print Network [OSTI]

RIS0-M-2319 RISK ANALYSIS OF A DISTILLATION UNIT J. R. Taylor**, 0. Hansen*, C. Jensen*, 0. F. A risk analysis of a batch distillation unit is de- scribed. The analysis has been carried out at several.2. Objectives and organisation 5 1.2.2. Philosophy and approach 6 1.3.1. The distillation unit 8 1

52

CHEM333: Experiment 4: Steam Distillation of Essential Oils;  

E-Print Network [OSTI]

CHEM­333: Experiment 4: Steam Distillation of Essential Oils; Experiments A, C, D and below. Reading: For this experiment read Chapter 10. This week you will get to use steam distillation to isolate may wait until you come to lab to find out which spice you get. Steam distillation is not a common

Taber, Douglass

53

Contact structure for use in catalytic distillation  

DOE Patents [OSTI]

A method is described for conducting catalytic chemical reactions and fractionation of the reaction mixture comprising feeding reactants into a distillation column reactor, contracting said reactant in liquid phase with a fixed bed catalyst in the form of a contact catalyst structure consisting of closed porous containers containing the catalyst for the reaction and a clip means to hold and support said containers, which are disposed above, i.e., on the distillation trays in the tower. The trays have weir means to provide a liquid level on the trays to substantially cover the containers. In other words, the trays function in their ordinary manner with the addition thereto of the catalyst. The reaction mixture is concurrently fractionated in the column. 7 figs.

Jones, E.M. Jr.

1984-03-27T23:59:59.000Z

54

Contact structure for use in catalytic distillation  

DOE Patents [OSTI]

A method and apparatus are disclosed for conducting catalytic chemical reactions and fractionation of the reaction mixture, comprising and feeding reactants into a distillation column reactor contracting said reactant in a liquid phase with a fixed bed catalyst in the form of a contact catalyst structure, consisting of closed porous containers containing the catalyst for the reaction and a clip means to hold and support said containers, which are disposed above, i.e., on the distillation trays in the tower. The trays have weir means to provide a liquid level on the trays to substantially cover the containers. In other words, the trays function in their ordinary manner with the addition thereto of the catalyst. The reaction mixture is concurrently fractionated in the column. 7 figs.

Jones, E.M. Jr.

1985-08-20T23:59:59.000Z

55

Contact structure for use in catalytic distillation  

DOE Patents [OSTI]

A method for conducting catalytic chemical reactions and fractionation of the reaction mixture comprising feeding reactants into a distillation column reactor contracting said reactant in liquid phase with a fixed bed catalyst in the form of a contact catalyst structure consisting of closed porous containers containing the catatlyst for the reaction and a clip means to hold and support said containers, which are disposed above, i.e., on the distillation trays in the tower. The trays have weir means to provide a liquid level on the trays to substantially cover the containers. In other words, the trays function in their ordinary manner with the addition thereto of the catalyst. The reaction mixture is concurrently fractionated in the column.

Jones, Jr., Edward M. (Friendswood, TX)

1984-01-01T23:59:59.000Z

56

Contact structure for use in catalytic distillation  

DOE Patents [OSTI]

A method and apparatus for conducting catalytic chemical reactions and fractionation of the reaction mixture, comprising and feeding reactants into a distillation column reactor contracting said reactant in a liquid phase with a fixed bed catalyst in the form of a contact catalyst structure, consisting of closed porous containers containing the catalyst for the reaction and a clip means to hold and support said containers, which are disposed above, i.e., on the distillation trays in the tower. The trays have weir means to provide a liquid level on the trays to substantially cover the containers. In other words, the trays function in their ordinary manner with the addition thereto of the catalyst. The reaction mixture is concurrently fractionated in the column.

Jones, Jr., Edward M. (Friendswood, TX)

1985-01-01T23:59:59.000Z

57

Fuel-blending stocks from the hydrotreatment of a distillate formed by direct coal liquefaction  

SciTech Connect (OSTI)

The direct liquefaction of coal in the iron-catalyzed Suplex process was evaluated as a technology complementary to Fischer-Tropsch synthesis. A distinguishing feature of the Suplex process, from other direct liquefaction processes, is the use of a combination of light- and heavy-oil fractions as the slurrying solvent. This results in a product slate with a small residue fraction, a distillate/naphtha mass ratio of 6, and a 65.8 mass % yield of liquid fuel product on a dry, ash-free coal basis. The densities of the resulting naphtha (C{sub 5}-200{sup o}C) and distillate (200-400{sup o}C) fractions from the hydroprocessing of the straight-run Suplex distillate fraction were high (0.86 and 1.04 kg/L, respectively). The aromaticity of the distillate fraction was found to be typical of coal liquefaction liquids, at 60-65%, with a Ramsbottom carbon residue content of 0.38 mass %. Hydrotreatment of the distillate fraction under severe conditions (200{sup o}C, 20.3 MPa, and 0.41 g{sub feed} h{sup -1} g{sub catalyst}{sup -1}) with a NiMo/Al{sub 2}O{sub 3} catalyst gave a product with a phenol content of {lt}1 ppm, a nitrogen content {lt}200 ppm, and a sulfur content {lt}25 ppm. The temperature was found to be the main factor affecting diesel fraction selectivity when operating at conditions of WHSV = 0.41 g{sub feed} h{sup -1} g{sub catalyst}{sup -1} and PH{sub 2} = 20.3 MPa, with excessively high temperatures (T {gt} 420{sup o}C) leading to a decrease in diesel selectivity. The fuels produced by the hydroprocessing of the straight-run Suplex distillate fraction have properties that make them desirable as blending components, with the diesel fraction having a cetane number of 48 and a density of 0.90 kg/L. The gasoline fraction was found to have a research octane number (RON) of 66 and (N + 2A) value of 100, making it ideal as a feedstock for catalytic reforming and further blending with Fischer-Tropsch liquids. 44 refs., 9 figs., 12 tabs.

Andile B. Mzinyati [Sasol Technology Research and Development, Sasolburg (South Africa). Fischer-Tropsch Refinery Catalysis

2007-09-15T23:59:59.000Z

58

New Design Methods And Algorithms For High Energy-Efficient And Low-cost Distillation Processes  

SciTech Connect (OSTI)

This project sought and successfully answered two big challenges facing the creation of low-energy, cost-effective, zeotropic multi-component distillation processes: first, identification of an efficient search space that includes all the useful distillation configurations and no undesired configurations; second, development of an algorithm to search the space efficiently and generate an array of low-energy options for industrial multi-component mixtures. Such mixtures are found in large-scale chemical and petroleum plants. Commercialization of our results was addressed by building a user interface allowing practical application of our methods for industrial problems by anyone with basic knowledge of distillation for a given problem. We also provided our algorithm to a major U.S. Chemical Company for use by the practitioners. The successful execution of this program has provided methods and algorithms at the disposal of process engineers to readily generate low-energy solutions for a large class of multicomponent distillation problems in a typical chemical and petrochemical plant. In a petrochemical complex, the distillation trains within crude oil processing, hydrotreating units containing alkylation, isomerization, reformer, LPG (liquefied petroleum gas) and NGL (natural gas liquids) processing units can benefit from our results. Effluents from naphtha crackers and ethane-propane crackers typically contain mixtures of methane, ethylene, ethane, propylene, propane, butane and heavier hydrocarbons. We have shown that our systematic search method with a more complete search space, along with the optimization algorithm, has a potential to yield low-energy distillation configurations for all such applications with energy savings up to 50%.

Agrawal, Rakesh

2013-11-21T23:59:59.000Z

59

Apparatus for distilling shale oil from oil shale  

SciTech Connect (OSTI)

An apparatus for distilling shale oil from oil shale comprises: a vertical type distilling furnace which is divided by two vertical partitions each provided with a plurality of vent apertures into an oil shale treating chamber and two gas chambers, said oil shale treating chamber being located between said two gas chambers in said vertical type distilling furnace, said vertical type distilling furnace being further divided by at least one horizontal partition into an oil shale distilling chamber in the lower part thereof and at least one oil shale preheating chamber in the upper part thereof, said oil shale distilling chamber and said oil shale preheating chamber communication with each other through a gap provided at an end of said horizontal partition, an oil shale supplied continuously from an oil shale supply port provided in said oil shale treating chamber at the top thereof into said oil shale treating chamber continuously moving from the oil shale preheating chamber to the oil shale distilling chamber, a high-temperature gas blown into an oil shale distilling chamber passing horizontally through said oil shale in said oil shale treating chamber, thereby said oil shale is preheated in said oil shale preheating chamber, and a gaseous shale oil is distilled from said preheated oil shale in said oil shale distilling chamber; and a separator for separating by liquefaction a gaseous shale oil from a gas containing the gaseous shale oil discharged from the oil shale preheating chamber.

Shishido, T.; Sato, Y.

1984-02-14T23:59:59.000Z

60

Energy conservation in distillation: a technology applications manual  

SciTech Connect (OSTI)

Distillation is the most widely practiced technique for separating mixtures of chemical species, but it is an energy intensive process. A 10% reduction in distillation energy consumption would effect a significant savings. On a national basis this would be an annual savings of 200 trillion Btu, or the equivalent of 36.5 million barrels of oil per year. Technology to achieve these savings in distillation energy is available and measures are presented to assist process engineers in technical and economic analysis of the energy conservation measures most suitable for particular distillation applications. The manual catalogs all of the energy conservation options applicable to distillation and the options by the investment required; describes in detail the options having a significant potential to reduce distillation energy requirements economically; provides guidelines that will allow the plant engineer to quickly screen each option for his application; and provides short-cut calculation procedures for use in a preliminary economic analysis of promising options.

Not Available

1980-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Energy Conservation Options in Distillation Processes  

E-Print Network [OSTI]

~itroo.? ':!OD.e~tell.,..ot!.k1 .'k..,.-.ottNltlu'..,. II ""'I'JI ..... ~I_ """-.4008l1"OO I ~.z.,. 1 ,1'1 (-frl-.'....u_~ R.da at AC~Ofllftl\\,J'ftlit...." ? I 5 "'-tlnc&! Tt.,.. ? 21.' \\lip Gilil.In31 j TnyE.'tIc>Mcy .11.1'llo I ~~TI""'.'2.at... I There are many options available to the engi*eer seeking to reduce the energy requirements of a distil lation process. The technology for most of these I, options has been available for many years, but it has only recently become economically...

Harris, G. E.; Hearn, W. R.; Blythe, G. M.; Stuart, J. M.

1980-01-01T23:59:59.000Z

62

Use of computers for multicomponent distillation calculations  

E-Print Network [OSTI]

The corrected values for the b 's are best cal- i culated by multiplying (b. /d ) by (d. ) The compositions for each component in the vapor and liquid streams leaving plate j are calculated by use of the following equations. ('i/ i)ca ( i)co y. ji c Z (v... . . /b. ) (b. ) ji i ca i co i=1 , f a j x N+1 C (47-b) A temperature profile may be calculated by making either bubble or dew point calculations based on the compositions obtained by use of Equations (46) and (47). The specified distillate rate must...

Sullivan, Samuel Lane

1959-01-01T23:59:59.000Z

63

Advanced Distillation: Programs Proposed to DOE  

E-Print Network [OSTI]

to the foremost practitioner of the Advanced Distillation art, due to a 30 year continuity in Ule area as both a consultant and a university professor. His consulting assignments lu1ve been long-ternl

Woinsky, S. G.

64

Fusion Residues  

E-Print Network [OSTI]

We discuss when and how the Verlinde dimensions of a rational conformal field theory can be expressed as correlation functions in a topological LG theory. It is seen that a necessary condition is that the RCFT fusion rules must exhibit an extra symmetry. We consider two particular perturbations of the Grassmannian superpotentials. The topological LG residues in one perturbation, introduced by Gepner, are shown to be a twisted version of the $SU(N)_k$ Verlinde dimensions. The residues in the other perturbation are the twisted Verlinde dimensions of another RCFT; these topological LG correlation functions are conjectured to be the correlation functions of the corresponding Grassmannian topological sigma model with a coupling in the action to instanton number.

Kenneth Intriligator

1991-08-19T23:59:59.000Z

65

advanced distillation control: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Morari California.Eng., Norwegian Institute of Technology (NTH), N-7034 Trondheim, Norway Paper presented at Symposium Distillation Skogestad, Sigurd 14 CONTROL AND ENERGY...

66

azeotropic distillation columns: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of Azeotropic Mixtures in Closed Batch Distillation Arrangements S. Skouras and S, Norway SCOPE OF THE PROJECT How can we separate ternary mixtures in closed batch...

67

Table 50. Prime Supplier Sales Volumes of Distillate Fuel Oils...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Marketing Annual 1998 359 Table 50. Prime Supplier Sales Volumes of Distillate Fuel Oils and Kerosene by PAD District and State (Thousand Gallons per Day) - Continued...

68

Table 50. Prime Supplier Sales Volumes of Distillate Fuel Oils...  

Gasoline and Diesel Fuel Update (EIA)

Marketing Annual 1999 359 Table 50. Prime Supplier Sales Volumes of Distillate Fuel Oils and Kerosene by PAD District and State (Thousand Gallons per Day) - Continued...

69

Prime Supplier Sales Volumes of Distillate Fuel Oils and Kerosene...  

Gasoline and Diesel Fuel Update (EIA)

Marketing Annual 1996 401 Table 50. Prime Supplier Sales Volumes of Distillate Fuel Oils and Kerosene by PAD District and State (Thousand Gallons per Day) - Continued...

70

Prime Supplier Sales Volumes of Distillate Fuel Oils and Kerosene...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Marketing Annual 1997 401 Table 50. Prime Supplier Sales Volumes of Distillate Fuel Oils and Kerosene by PAD District and State (Thousand Gallons per Day) - Continued...

71

Energy Use in Distillation Operation: Nonlinear Economic Effects  

E-Print Network [OSTI]

important. For many distillation columns there is a tradeoff in operation between energy usage and product recovery and setting the proper usage target involves a calculation of the economic tradeoff between these two factors. However, distillation is a non-linear...

White, D. C.

2010-01-01T23:59:59.000Z

72

Pyrolysis of shale oil vacuum distillate fractions  

SciTech Connect (OSTI)

The freezing point of US Navy jet fuel (JP-5) has been related to the amounts of large n-alkanes present in the fuel. This behavior applies to jet fuels derived from alternate fossil fuel resources, such as shale oil, coal, and tar sands, as well as those derived from petroleum. In general, jet fuels from shale oil have the highest and those from coal the lowest n-alkane content. The origin of these n-alkanes in the amounts observed, especially in shale-derived fuels, is not readily explained on the basis of literature information. Studies of the processes, particularly the ones involving thermal stress, used to produce these fuels are needed to define how the n-alkanes form from larger molecules. The information developed will significantly contribute to the selection of processes and refining techniques for future fuel production from shale oil. Carbon-13 nmr studies indicate that oil shale rock contains many long unbranched straight chain hydrocarbon groups. The shale oil derived from the rock also gives indication of considerable straight chain material with large peaks at 14, 23, 30, and 32 ppM in the C-13 nmr spectrum. Previous pyrolysis studies stressed fractions of shale crude oil residua, measured the yields of JP-5, and determined the content of potential n-alkanes in the JP-5 distillation range (4). In this work, a shale crude oil vacuum distillate (Paraho) was separated into three chemical fractions. The fractions were then subjected to nmr analysis to estimate the potential for n-alkane production and to pyrolysis studies to determine an experimental n-alkane yield.

Hazlett, R.N.; Beal, E.

1983-01-01T23:59:59.000Z

73

Pyrolysis of shale oil vacuum distillate fractions  

SciTech Connect (OSTI)

The freezing point of U.S. Navy jet fuel (JP-5) has been related to the amounts of large nalkanes present in the fuel. This behavior applies to jet fuels derived from alternate fossil fuel resources, such as shale oil, coal, and tar sands, as well as those derived from petroleum. In general, jet fuels from shale oil have the highest and those from coal the lowest n-alkane content. The origin of these n-alkanes in the amounts observed, especially in shale-derived fuels, is not readily explained on the basis of literature information. Studies of the processes, particularly the ones involving thermal stress, used to produce these fuels are needed to define how th n-alkanes form from larger molecules. The information developed will significantly contribute to the selection of processes and refining techniques for future fuel production from shale oil. Carbon-13 nmr studies indicate that oil shale rock contains many long unbranched straight chain hydrocarbon groups. The shale oil derived from the rock also gives indication of considerable straight chain material with large peaks at 14, 23, 30 and 32 ppm in the C-13 nmr spectrum. Previous pyrolysis studies stressed fractions of shale crude oil residua, measured the yields of JP-5, and determined the content of potential n-alkanes in the JP-5 distillation range (4). In this work, a shale crude oil vacuum distillate (Paraho) was separated into three chemical fractions. The fractions were then subjected to nmr analysis to estimate the potential for n-alkane production and to pyrolysis studies to determine an experimental n-alkane yield.

Hazlett, R.N.; Beal, E.

1983-02-01T23:59:59.000Z

74

Structural group analysis of residues from Athabasca bitumen  

SciTech Connect (OSTI)

Although the processability of bitumen from tar sand is dependent on its chemical composition, the details of this relationship are poorly understood. In this study, residue fractions from Athabasca bitumen (topped at different temperatures) and hydrocracker and coker residues were analyzed in detail. Separated class fractions were subjected to elemental analysis, NMR and IR spectroscopy, and potentiometric titration. These data were combined mathematically to obtain a structural profile of each oil. This analysis defines the structural changes in asphaltene precipitates due to distillation and processing, as well as the quantitative changes in the overall structural composition of the oil. Hydrocarbon structures such as paraffinic chains and naphthenes show definite trends with distillation and processing.

Gray, M.R.; Choi, J.H.K.; Egiebor, N.O. (Alberta Univ., Edmonton, AB (Canada). Dept. of Chemical Engineering); Kirchen, R.P.; Sanford, E.C. (Syncrude Canada Ltd., Edmonton, AB (Canada))

1989-01-01T23:59:59.000Z

75

Simple rules help select best hydrocarbon distillation scheme  

SciTech Connect (OSTI)

Separation economics depend mainly on investment for major equipment and energy consumption. This relationship, together with the fact that, in most cases, many alternative schemes will be proposed, make it essential to find an optimum scheme that minimizes overall costs. Practical solutions are found by applying heuristics -- exploratory problem-solving techniques that eliminate alternatives without applying rigorous mathematical procedures. These techniques have been applied to a case study. In the case study, a hydrocarbon mixture will be transported through a pipeline to a fractionation plant, where it will be separated into commercial products for distribution. The fractionation will consist of a simple train of distillation columns, the sequence of which will be defined by applying heuristic rules and determining the required thermal duties for each column. The facility must separate ethane, propane and mixed butanes, natural gasoline (light straight-run, or LSR, gasoline), and condensate (heavy naphtha). The ethane will be delivered to an ethylene plant as a gaseous stream, the propane and butanes will be stored in cryogenic tanks, and the gasoline and heavy naphtha also will be stored.

Sanchezllanes, M.T.; Perez, A.L.; Martinez, M.P.; Aguilar-Rodriguez, E.; Rosal, R. del (Inst. Mexicano del Petroleo, Mexico City (Mexico))

1993-12-06T23:59:59.000Z

76

Heat Integrated Distillation through Use of Microchannel Technology  

Broader source: Energy.gov [DOE]

This factsheet describes a research project whose goal is to develop a breakthrough distillation process using Microchannel Process Technology to integrate heat transfer and separation into a single unit operation.

77

CHEM333: Lab Experiment 3: Distillation and Gas Chromatography  

E-Print Network [OSTI]

. Distillation is used to isolate many of life's essentials such as gasoline from oil or brandy from wine much about the mathematics of Raoult's Law; you will see it again in physical chemistry. Pay particular

Taber, Douglass

78

Absorption Cycle Fundamentals and Applications Guidelines for Distillation Energy Savings  

E-Print Network [OSTI]

The absorption cycle offers one of the most economic and widely applicable technologies for waste heat upgrading. It can use off-the-shelf hardware that is available now, at any required capacity rating. Fractional distillations, as a class...

Erickson, D. C.; Davidson, W. F.

1984-01-01T23:59:59.000Z

79

Membrane augmented distillation to separate solvents from water  

DOE Patents [OSTI]

Processes for removing water from organic solvents, such as ethanol. The processes include distillation to form a rectified overhead vapor, compression of the rectified vapor, and treatment of the compressed vapor by two sequential membrane separation steps.

Huang, Yu; Baker, Richard W.; Daniels, Rami; Aldajani, Tiem; Ly, Jennifer H.; Alvarez, Franklin R.; Vane, Leland M.

2012-09-11T23:59:59.000Z

80

An experimental and mathematical investigation of hydrocarbon steam distillation  

E-Print Network [OSTI]

of Committee) Dr. Pau B. Crawford (Member) r. William D. McCain Jr. r. A ber t T. Watson (Member) Dr. i l. iam D. on Gonten ead of Department) December 1984 ABSTRACT An Experimental and Mathematical Investigation of Hydrocarbon Steam Distillation... mechanism associated with steam flooding and in-situ combustion enhanced oil recovery projects. It also takes place in hydrocarbon recovery from deep volatile oil reservoirs. Nethods for predicting the recovery of hydrocarbons by steam distillation have...

Langhoff, John Allan

1984-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Determination of plate efficiencies for conventional distillation columns  

E-Print Network [OSTI]

DETERMINATION OF PLATE EFFICIENCIES FOR CONVENTIONAL DISTILLATION COIUMNS A Thesis By Thomas Raymond Harris Submitted to the Graduate School of the Agricultural and Mechanical College of Texas in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE May 1962 Ma)or Sub)ect t Chemical Engineering DETERMINATION OF PLATE EFFICIENCIES FOR CONVENTIONAL DISTILLATION COLUMNS A Thesis Thomas Raymond Harris Approred as to style and content bye Chairman of ommittee Head...

Harris, Thomas Raymond

2012-06-07T23:59:59.000Z

82

Single-step distillation protocol with generalized beam splitters  

SciTech Connect (OSTI)

We develop a distillation protocol for multilevel qubits (qudits) using generalized beam splitters like in the proposal of Pan et al. for ordinary qubits. We find an acceleration with respect to the scheme of Bennet et al. when extended to qudits. It is also possible to distill entangled pairs of photons carrying orbital angular momenta states that conserve the total angular momenta as those produced in recent experiments.

Martin-Delgado, M. A.; Navascues, M. [Departamento de Fisica Teorica I, Universidad Complutense, 28040 Madrid, (Spain)

2003-07-01T23:59:59.000Z

83

Integrated Thermal and Hydraulic Analysis of Distillation Columns  

E-Print Network [OSTI]

significant additional insights to help screen the options for distillation column revamps. Column Targeting Aspen Plus Column Targeting tool offers capabilities for thermal and hydraulic analysis of distillation columns. During design or retrofit analysis...). Aspen Plus Column Targeting Tool generates the CGCCs based on the Practical Near-Minimum Thermodynamic Condition (PNMTC) approximation (Dhole and Linnhoff). The enthalpies used in plotting the CGCCs are calculated at a given stage of the column...

Samant, K.; Sinclair, I.; Keady, G.

84

Synthesis and design of optimal thermal membrane distillation networks  

E-Print Network [OSTI]

distillation as a technology that can be driven by thermal energy at low enthalpy, such as geothermal energy, by using a hybrid air gap membrane distillation- fluidized bed crystallization assembly for desalination. Tomaszewska (2000) has studied... of pre-pressurizing of the membrane pores and control of dissolved gas concentrations in the feed and recycled permeate in order to prevent pore penetration and wetting (Agashichev and Sivakov, 1993). Temperature polarization effects have been...

Nyapathi Seshu, Madhav

2006-10-30T23:59:59.000Z

85

Key Distillation and the Secret-Bit Fraction  

E-Print Network [OSTI]

We consider distillation of secret bits from partially secret noisy correlations P_ABE, shared between two honest parties and an eavesdropper. The most studied distillation scenario consists of joint operations on a large number of copies of the distribution (P_ABE)^N, assisted with public communication. Here we consider distillation with only one copy of the distribution, and instead of rates, the 'quality' of the distilled secret bits is optimized, where the 'quality' is quantified by the secret-bit fraction of the result. The secret-bit fraction of a binary distribution is the proportion which constitutes a secret bit between Alice and Bob. With local operations and public communication the maximal extractable secret-bit fraction from a distribution P_ABE is found, and is denoted by Lambda[P_ABE]. This quantity is shown to be nonincreasing under local operations and public communication, and nondecreasing under eavesdropper's local operations: it is a secrecy monotone. It is shown that if Lambda[P_ABE]>1/2 then P_ABE is distillable, thus providing a sufficient condition for distillability. A simple expression for Lambda[P_ABE] is found when the eavesdropper is decoupled, and when the honest parties' information is binary and the local operations are reversible. Intriguingly, for general distributions the (optimal) operation requires local degradation of the data.

Nick S. Jones; Lluis Masanes

2008-05-12T23:59:59.000Z

86

Process for removing naphthenic acids from petroleum distillates  

SciTech Connect (OSTI)

A liquid extraction process is described for removing naphthenic acids from naphthenic acid containing petroleum distillates boiling within the range of about 180/sup 0/-600/sup 0/C. and having an acid number of at least about 0.2 which process comprises the steps of: (a) intimately contacting the petroleum distillates with a solvent consisting essentially of methanol, water, and about from 2-20 wt. % ammonia and having a methanol: water ratio in the range of about from 0.2 to 3 parts by weight of methanol per part by weight of water and using an ammonia to petroleum distillate ratio of about 0.1-1 part by weight of ammonia per 100 parts by weight of the petroleum distillate. This selectively extracts the naphthenic acids into the solvent and yielding an immiscible two-phase liquid mixture, one of which is naphthenic acid-rich solvent phase and the other of which is a substantially napthenic acid-free petroleum distillate phase; and (b) separating and respectively recovering the naphtenic acid-rich solvent phase and petroleum distillate phase.

Danzik, M.

1987-01-06T23:59:59.000Z

87

Table A3. Refiner/Reseller Prices of Distillate and Residual Fuel Oils,  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProved ReservesFeet)per Thousand Cubic4,630.2 10,037.24. U.S. VehicleFoot,EffectiveA3.

88

Table A3. Refiner/Reseller Prices of Distillate and Residual Fuel Oils,  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProved ReservesFeet)per Thousand Cubic4,630.2 10,037.24. U.S. VehicleFoot,EffectiveA3.

89

Kinetics and thermodynamics of hydrotreating synthetic middle distillates  

SciTech Connect (OSTI)

Middle distillates from the Tar Sands deposits in Alberta are an important component of diesel and jet fuels in the Canadian market. Commercial catalysts based on sulfided Ni-Mo and Ni-W are currently used to hydrogenate synthetic distillates to improve the cetane number and smoke point. In previous work {sup 13}C NMR was used to study the kinetics of overall hydrogenation of aromatics over sulfided Co-Mo, Ni-Mo and Ni-W catalysts. Arrhenius parameters were obtained for hydrogenation over sulfided Ni-W catalyst for a similar distillate feedstock. In the latter study, mass spectrometry was used to quantitate the three major aromatic hydrocarbon group types in the feed and products. In this study, liquid products from hydrotreating experiments with a hydrotreated distillate from delayed coking of Athabasca bitumen and sulfided Co-Mo and Ni-Mo catalysts have been analyzed by mass spectrometry. This completes a preliminary comparison of the kinetics of hydrogenation of alkylbenzenes, benzocycloparaffins and benzodicycloparaffins, the three major aromatic hydrocarbon types in these distillates.

Fisher, I.P. (Petro-Canada R and D Dept., Sheridan Park, Ontario (Canada)); Wilson, M.F. (CANMET, Ottawa, Ontario (Canada))

1987-04-01T23:59:59.000Z

90

Application of a Plantwide Control Design Procedure to a Distillation Column with Heat Pump  

E-Print Network [OSTI]

(Larsson & Skogestad 2001) to a distillation column heat-integrated by using a heatpump. Top-down analysis) and apply it to a distillation column with heatpump. Plantwide control design should start by formulating

Skogestad, Sigurd

91

ORIGINAL PAPER Twin-Screw Extrusion Processing of Distillers Dried  

E-Print Network [OSTI]

. Physical properties . Protein . Twin-screw extruder Introduction As a consequence of changes in energyORIGINAL PAPER Twin-Screw Extrusion Processing of Distillers Dried Grains with Solubles (DDGS. Twin- screw extrusion studies were performed to investigate the production of nutritionally balanced

92

Rigorous Synthesis and Simulation of Complex Distillation Networks  

E-Print Network [OSTI]

energy-efficient distillation net- works. Complex column networks have substantial potential for energy- thesizing such complex energy-efficient networks. A robust feasibility criterion drives the selection foundations of se st in exploring energy-efficient distillatin exploring energy-efficient distillat ave

Linninger, Andreas A.

93

Separation of Azeotropic Mixtures in Closed Batch Distillation Arrangements  

E-Print Network [OSTI]

Separation of Azeotropic Mixtures in Closed Batch Distillation Arrangements S. Skouras and S to obtain a light and a heavy fraction simultaneously from the top and the bottom of the column, while an intermediate fraction may also be recovered in the middle vessel. Two modifications of the multivessel

Skogestad, Sigurd

94

Solar Ethanol Distillation Oara Neumann,1,3  

E-Print Network [OSTI]

requiring no energy input by conventional sources, with the potential to replace, or significantly reduce-harvesting nanoparticles that capture solar energy for direct liquid-vapor conversion, eliminating the energy O-9 Solar Ethanol Distillation Oara Neumann,1,3 Albert D. Neumann,2 Julius Müller,1

95

Investigation of the Potential for Biofuel Blends in Residual Oil-Fired Power Generation Units as an Emissions Reduction Strategy for New York State  

SciTech Connect (OSTI)

There is a significant amount of oil, about 12.6 million barrels per year, used for power generation in New York State. The majority of it is residual oil. The primary reason for using residual oil probably is economic, as these fuels are cheaper than distillates. However, the stack emissions from the use of such fuels, especially in densely populated urban areas, can be a cause for concern. The emissions of concern include sulfur and nitrogen oxides and particulates, particularly PM 2.5. Blending with distillate (ASTM No.2) fuels may not reduce some or all of these emissions. Hence, a case can be made for blending with biofuels, such as biodiesel, as they tend to have very little fuel bound sulfur and nitrogen and have been shown in prior work at Brookhaven National Laboratory (BNL) to reduce NOx emissions as well in small boilers. Some of the research carried out at CANMET in Canada has shown potential reductions in PM with blending of biodiesel in distillate oil. There is also the benefit obtaining from the renewable nature of biofuels in reducing the net carbon dioxide emitted thus contributing to the reduction of green house gases that would otherwise be emitted to the atmosphere. The present project was conceived to examine the potential for such benefits of blending biofuels with residual oil. A collaboration was developed with personnel at the New York City Poletti Power Plant of the New York Power Authority. Their interest arose from an 800 MW power plant that was using residual oil and which was mandated to be shut down in 2010 because of environmental concerns. A blend of 20% biodiesel in residual oil had also been tested for a short period of about two days in that boiler a couple of years back. In this project, emission measurements including particulate measurements of PM2.5 were made in the commercial boiler test facility at BNL described below. Baseline tests were done using biodiesel as the blending biofuel. Biodiesel is currently and probably in the foreseeable future more expensive than residual fuel. So, another task was to explore potential alternative biofuels that might confer emission benefits similar to those of biodiesel, while being potentially significantly cheaper. Of course, for power plant use, availability in the required quantities is also a significant criterion. A subsidiary study to determine the effect of the temperature of the filter used to collect and measure the PM 2.5 emissions was conducted. This was done for reasons of accuracy in a residential boiler using distillate fuel blends. The present report details the results obtained in these tests with the baseline ASTM No. 6 fuel and blends of biodiesel with it as well as the results of the filter temperature study. The search for the alternative 'cheaper' biofuel identified a potential candidate, but difficulties encountered with the equipment during the testing prevented testing of the alternative biofuel.

Krishna, C.R.; McDonald, R.

2009-05-01T23:59:59.000Z

96

Atmospheric Crude Oil Distillation Operable Capacity  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781Title: Telephone:shortOil and Natural8U.S.NA (Barrels per Calendar

97

Total Adjusted Sales of Distillate Fuel Oil  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S. NaturalA. Michael SchaalNovember 26, 2008 (Next1, 20126,6,4,7,Top 100End Use:

98

Total Sales of Distillate Fuel Oil  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S. NaturalA. Michael SchaalNovember 26, 2008 (Next1,Product:Country:

99

Product Supplied for Distillate Fuel Oil  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30NaturalThousand Cubic Feet) OmanThousand36,610.05 Kerosene refiners .

100

Design of Extraction Column Methanol Recovery System for the TAME Reactive Distillation Process  

E-Print Network [OSTI]

, methanol recovery 1. Introduction A process of producing TAME via reactive distillation has been presented the bulk of the reaction between C5 and methanol to produce TAME and a reactive distillation. MethanolDesign of Extraction Column Methanol Recovery System for the TAME Reactive Distillation Process

Al-Arfaj, Muhammad A.

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Improved Swing-Cut Modeling for Planning and Scheduling of Oil-Refinery Distillation Units  

E-Print Network [OSTI]

, Pennsylvania 15213, United States. Crude-oil assays, Distillation, Fractionation, Swing-cuts, Temperature cut with in the nonlinear optimization. 1. INTRODUCTION Distillation or fractionation models for planning and scheduling1 Improved Swing-Cut Modeling for Planning and Scheduling of Oil-Refinery Distillation Units Brenno

Grossmann, Ignacio E.

102

Optimal Operation of a Petlyuk Distillation Column: Energy Savings by Over-fractionating  

E-Print Network [OSTI]

Optimal Operation of a Petlyuk Distillation Column: Energy Savings by Over-fractionating Vidar the unexpected result that over-fractionating one of the product streams in a Petlyuk distillation column may is optimal in some cases. 1. Introduction The Petlyuk distillation column, see Figure 1(a), with a pre-fractionator

Skogestad, Sigurd

103

Integrated Design, Operation and Control of Batch Extractive Distillation with a Middle Vessel  

E-Print Network [OSTI]

into a number of product fractions in a single batch column whereas, in continuous distillation several columnsIntegrated Design, Operation and Control of Batch Extractive Distillation with a Middle Vessel E. K distillation for separating homogeneous minimum-boiling azeotropic mixtures, where the extractive agent

Skogestad, Sigurd

104

Model predictive control of a pilot-scale distillation column using a programmable automation controller  

E-Print Network [OSTI]

Model predictive control of a pilot-scale distillation column using a programmable automation). The controller is tested on a pilot-scale binary distillation column to track reference temperatures. A majorRIO) to control a pilot-scale binary distillation col- umn. Both the PI-controllers and the supervising online MPC

105

Reactive Distillation for Esterification of Bio-based Organic Acids  

SciTech Connect (OSTI)

The following is the final report of the three year research program to convert organic acids to their ethyl esters using reactive distillation. This report details the complete technical activities of research completed at Michigan State University for the period of October 1, 2003 to September 30, 2006, covering both reactive distillation research and development and the underlying thermodynamic and kinetic data required for successful and rigorous design of reactive distillation esterification processes. Specifically, this project has led to the development of economical, technically viable processes for ethyl lactate, triethyl citrate and diethyl succinate production, and on a larger scale has added to the overall body of knowledge on applying fermentation based organic acids as platform chemicals in the emerging biorefinery. Organic acid esters constitute an attractive class of biorenewable chemicals that are made from corn or other renewable biomass carbohydrate feedstocks and replace analogous petroleum-based compounds, thus lessening U.S. dependence on foreign petroleum and enhancing overall biorefinery viability through production of value-added chemicals in parallel with biofuels production. Further, many of these ester products are candidates for fuel (particularly biodiesel) components, and thus will serve dual roles as both industrial chemicals and fuel enhancers in the emerging bioeconomy. The technical report from MSU is organized around the ethyl esters of four important biorenewables-based acids: lactic acid, citric acid, succinic acid, and propionic acid. Literature background on esterification and reactive distillation has been provided in Section One. Work on lactic acid is covered in Sections Two through Five, citric acid esterification in Sections Six and Seven, succinic acid in Section Eight, and propionic acid in Section Nine. Section Ten covers modeling of ester and organic acid vapor pressure properties using the SPEAD (Step Potential Equilibrium and Dynamics) method.

Fields, Nathan; Miller, Dennis J.; Asthana, Navinchandra S.; Kolah, Aspi K.; Vu, Dung; Lira, Carl T.

2008-09-23T23:59:59.000Z

106

Enhanced Separation Efficiency in Olefin/Paraffin Distillation  

Broader source: Energy.gov [DOE]

This factsheet describes a research project whose main objective is to develop technologies to enhance separation efficiencies by replacing the conventional packing materials with hollow fiber membranes, which have a high specific area and separated channels for both liquid and vapor phases. The use of hollow fibers in distillation columns can help refineries decrease operating costs, reduce greenhouse gas emissions through reduced heating costs, and help expand U.S. refining capacity through improvements to existing sites, without large scale capital investment.

107

"Distillation, Absorption and Extraction" April 5-6, 2001 in Bamberg,, Halvorsen NTNU Department of Chemical Engineering  

E-Print Network [OSTI]

distillation · Underwood (1946, 1948a,b), Fractional distillation of multicomponent mixtures · Shiras (1950"Distillation, Absorption and Extraction" April 5-6, 2001 in Bamberg,, Halvorsen NTNU Department Distillation Arrangements by Ivar J. Halvorsen and Sigurd Skogestad Norwegian University of Science

Skogestad, Sigurd

108

Alcohol production from agricultural and forestry residues  

SciTech Connect (OSTI)

Technologies available for the production of ethanol from whole corn are reviewed. Particular emphasis is placed on the environmental aspects of the process, including land utilization and possible air and water pollutants. Suggestions are made for technological changes intended to improve the economics of the process as well as to reduce some of the pollution from by-product disposal. Ethanol may be derived from renewable cellulosic substances by either enzymatic or acid hydrolysis of cellulose to sugar, followed by conventional fermentation and distillation. The use of two agricultural residues - corn stover (field stalks remaining after harvest) and straw from wheat crops - is reviewed as a cellulosic feedstock. Two processes have been evaluated with regard to environmental impact - a two-stage acid process developed by G.T. Tsao of Purdue University and an enzymatic process based on the laboratory findings of C.R. Wilke of the University of California, Berkeley. The environmental residuals expected from the manufacture of methyl and ethyl alcohols from woody biomass are covered. The methanol is produced in a gasification process, whereas ethanol is produced by hydrolysis and fermentation processes similar to those used to derive ethanol from cellulosic materials.

Dale, L; Opilla, R; Surles, T

1980-09-01T23:59:59.000Z

109

Alcohol production from agricultural and forestry residues  

SciTech Connect (OSTI)

A variety of carbohydrate sources can be used as raw material for the production of ethanol. Section 1 is a review of technologies available for the production of ethanol from whole corn. Particular emphasis is placed on the environmental aspects of the process, including land utilization and possible air and water pollutants. Suggestions are made for technological changes intended to improve the economics of the process as well as to reduce some of the pollution from by-product disposal. Ethanol may be derived from renewable cellulosic substances by either enzymatic or acid hydrolysis of cellulose to sugar, followed by conventional fermentation and distillation. Section 2 is a review of the use of two agricultural residues - corn stover (field stalks remaining after harvest) and straw from wheat crops - as a cellulosic feedstock. Two processes have been evaluated with regard to environmental impact - a two-stage acid process developed by G.T. Tsao of Purdue University and an enzymatic process based on the laboratory findings of C.R. Wilke of the University of California, Berkeley. Section 3 deals with the environmental residuals expected from the manufacture of methyl and ethyl alcohols from woody biomass. The methanol is produced in a gasification process, whereas ethanol is produced by hydrolysis and fermentation processes similar to those used to derive ethanol from cellulosic materials.

Opilla, R.; Dale, L.; Surles, T.

1980-05-01T23:59:59.000Z

110

Heat Recovery in Distillation by Mechanical Vapor Recompression  

E-Print Network [OSTI]

matc~ can be made between low-grade waste energy sourc~s and process uses, thereby improving plant energ~ efficiency. I A relatively high rate of return on invest-JI ment is expected in most cases. The optimum op, erating conditions are dictated...," Chem. Eng. Prog., Vol. 76:7, pp. 44-49, July 1980. I 2. Anon, "Di,stillation Prime Target for Energ~ Conservation," Oil & Gas Journal, Vol. 76:~6, pp. 92-94, April 17, 1978. I 3. W. F. Kenne'y, "Reducing the Energy Demand o~ Separation Processes...

Becker, F. E.; Zakak, A. I.

111

Multiple steady states during reactive distillation of methyl tert-butyl ether  

SciTech Connect (OSTI)

This paper presents results of computer simulations of the synthesis of methyl tert-butyl ether (MTBE) in a fixed-bed reactor and in a reactive distillation column. These calculations clearly showed the advantages of MTBE synthesis in a catalytic distillation tower. Furthermore, the computer simulations showed that multiple steady states may occur in the reactive distillation column during MTBE synthesis in a broad range of operating conditions. An analysis of some sensitivity studies is presented.

Nijhuis, S.A. (Univ. of Amsterdam (Netherlands). Chemical Engineering Dept.); Kerkhof, F.P.J.M.; Mak, A.N.S. (Comprimo Engineers and Contractors, Amsterdam (Netherlands))

1993-11-01T23:59:59.000Z

112

E-Print Network 3.0 - advanced distillation curve Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

58 (2003) 26712680 www.elsevier.comlocateces Summary: distillation: Advanced simulation and experimental validation. Computers and Chemical Engineering, 22, S371-S......

113

Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil...  

Gasoline and Diesel Fuel Update (EIA)

Petroleum Marketing Annual 1998 295 Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil Volumes by PAD District and State (Thousand Gallons per Day) - Continued...

114

Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil...  

Gasoline and Diesel Fuel Update (EIA)

Petroleum Marketing Annual 1995 337 Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil Volumes by PAD District and State (Thousand Gallons per Day) - Continued...

115

Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil...  

U.S. Energy Information Administration (EIA) Indexed Site

Petroleum Marketing Annual 1999 295 Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil Volumes by PAD District and State (Thousand Gallons per Day) - Continued...

116

E-Print Network 3.0 - atmospheric crude distillation Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Problems Summary: and atmospheric distillations of crude-oil mixtures from charging tanks. The crude is then processed in order... of resources: crude marine vessels, storage...

117

Development of a Fuzzy Logic Controller for a Distillation Column using Rockwell Software .  

E-Print Network [OSTI]

??In this thesis, an alternative control method based on Fuzzy Inference System (FIS) is proposed to keep the product composition of a distillation column constant.… (more)

Nizami, Muhammad

2011-01-01T23:59:59.000Z

118

Sustainable System for Residual Hazards Management  

SciTech Connect (OSTI)

Hazardous, radioactive and other toxic substances have routinely been generated and subsequently disposed of in the shallow subsurface throughout the world. Many of today’s waste management techniques do not eliminate the problem, but rather only concentrate or contain the hazardous contaminants. Residual hazards result from the presence of hazardous and/or contaminated material that remains on-site following active operations or the completion of remedial actions. Residual hazards pose continued risk to humans and the environment and represent a significant and chronic problem that require continuous longterm management (i.e. >1000 years). To protect human health and safeguard the natural environment, a sustainable system is required for the proper management of residual hazards. A sustainable system for the management of residual hazards will require the integration of engineered, institutional and land-use controls to isolate residual contaminants and thus minimize the associated hazards. Engineered controls are physical modifications to the natural setting and ecosystem, including the site, facility, and/or the residual materials themselves, in order to reduce or eliminate the potential for exposure to contaminants of concern (COCs). Institutional controls are processes, instruments, and mechanisms designed to influence human behavior and activity. System failure can involve hazardous material escaping from the confinement because of system degradation (i.e., chronic or acute degradation) or by externalintrusion of the biosphere into the contaminated material because of the loss of institutional control. An ongoing analysis of contemporary and historic sites suggests that the significance of the loss of institutional controls is a critical pathway because decisions made during the operations/remedial action phase, as well as decisions made throughout the residual hazards management period, are key to the longterm success of the prescribed system. In fact, given that society has become more reliant on and confident of engineered controls, there may be a growing tendency to be even less concerned with institutional controls.

Kevin M. Kostelnik; James H. Clarke; Jerry L. Harbour

2004-06-01T23:59:59.000Z

119

Minimum Energy Consumption in Multicomponent Distillation. 1. Vmin Diagram for a Two-Product Column  

E-Print Network [OSTI]

Minimum Energy Consumption in Multicomponent Distillation. 1. Vmin Diagram for a Two-Product Column how the minimum energy consumption is related to the feed-component distribution for all possible operating points in a two-product distillation column with a multicomponent feed. The classical Underwood

Skogestad, Sigurd

120

Minimum Energy Consumption in Multicomponent Distillation. 3. More Than Three Products and Generalized Petlyuk Arrangements  

E-Print Network [OSTI]

Minimum Energy Consumption in Multicomponent Distillation. 3. More Than Three Products-component feed into M products has been derived. Interestingly, the minimum-energy solution in a complex solution of minimum energy for distillation of a multicomponent feed into multiple products has not been

Skogestad, Sigurd

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Study of the Distillability of Werner States Using Entanglement Witnesses and Robust Semidefinite Programs  

E-Print Network [OSTI]

We use Robust Semidefinite Programs and Entanglement Witnesses to study the distillability of Werner states. We perform exact numerical calculations which show 2-undistillability in a region of the state space which was previously conjectured to be undistillable. We also introduce bases which yield interesting expressions for the {\\em distillability witnesses} and for a tensor product of Werner states with arbitrary number of copies.

Reinaldo O. Vianna; Andrew C. Doherty

2006-08-11T23:59:59.000Z

122

Optimal operation of a Petlyuk Distillation Column: Energy Savings by Over-fractionation  

E-Print Network [OSTI]

Optimal operation of a Petlyuk Distillation Column: Energy Savings by Over-fractionation · The Petlyuk distillation column, see Figure 1(a), with a pre-fractionator (C1) and a main column (C21 and C22) N-7465 Trondheim, Norway Abstract This work shows the unexpected result that over-fractionating one

Skogestad, Sigurd

123

Distillation Absorption 2010 A.B. de Haan, H. Kooijman and A. Grak (Editors)  

E-Print Network [OSTI]

coupling 1. Introduction Separation by distillation is responsible for a large fraction of immense amountDistillation Absorption 2010 A.B. de Haan, H. Kooijman and A. Górak (Editors) All rights reserved indicated that a 15 component aromatic's mixture can be separated very efficiently into four fractions

Skogestad, Sigurd

124

Optimization of Distillation Processes. Jos A. Caballero* and Ignacio E. Grossmann**  

E-Print Network [OSTI]

that handle more than 90% of separations and purifications. The capital investment for these distillation.87 million TJ) per year, or to a power consumption of 91 GW, or 54 million tons of crude oil. Distillation conditions to minimize the total investment and operating cost. Continuous decisions are related

Grossmann, Ignacio E.

125

Hanford tank residual waste – contaminant source terms and release models  

SciTech Connect (OSTI)

Residual waste is expected to be left in 177 underground storage tanks after closure at the U.S. Department of Energy’s Hanford Site in Washington State (USA). In the long term, the residual wastes represent a potential source of contamination to the subsurface environment. Residual materials that cannot be completely removed during the tank closure process are being studied to identify and characterize the solid phases and estimate the release of contaminants from these solids to water that might enter the closed tanks in the future. As of the end of 2009, residual waste from five tanks has been evaluated. Residual wastes from adjacent tanks C-202 and C-203 have high U concentrations of 24 and 59 wt%, respectively, while residual wastes from nearby tanks C-103 and C-106 have low U concentrations of 0.4 and 0.03 wt%, respectively. Aluminum concentrations are high (8.2 to 29.1 wt%) in some tanks (C-103, C-106, and S-112) and relatively low (<1.5 wt%) in other tanks (C-202 and C-203). Gibbsite is a common mineral in tanks with high Al concentrations, while non-crystalline U-Na-C-O-P±H phases are common in the U-rich residual wastes from tanks C-202 and C-203. Iron oxides/hydroxides have been identified in all residual waste samples studied to date. Contaminant release from the residual wastes was studied by conducting batch leach tests using distilled deionized water, a Ca(OH)2-saturated solution, or a CaCO3-saturated water. Uranium release concentrations are highly dependent on waste and leachant compositions with dissolved U concentrations one or two orders of magnitude higher in the tests with high U residual wastes, and also higher when leached with the CaCO3-saturated solution than with the Ca(OH)2-saturated solution. Technetium leachability is not as strongly dependent on the concentration of Tc in the waste, and it appears to be slightly more leachable by the Ca(OH)2-saturated solution than by the CaCO3-saturated solution. In general, Tc is much less leachable (<10 wt% of the available mass in the waste) than previously predicted. This may be due to the coprecipitation of trace concentrations of Tc in relatively insoluble phases such as Fe oxide/hydroxide solids.

Deutsch, William J.; Cantrell, Kirk J.; Krupka, Kenneth M.; Lindberg, Michael J.; Serne, R. Jeffrey

2011-08-23T23:59:59.000Z

126

"Table A10. Total Consumption of LPG, Distillate Fuel Oil, and Residual Fuel"  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ <Information Administration (EIA) 103. Relative Standard Errors for Table N8.3;"0. Total

127

"Table A2. Total Consumption of LPG, Distillate Fuel Oil, and Residual Fuel"  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ <Information Administration (EIA) 103. Relative Standard Errors for Table N8.3;"0. Total1.6.7..

128

Distillation sequence for the purification and recovery of hydrocarbons  

DOE Patents [OSTI]

This invention is an improved distillation sequence for the separation and purification of ethylene from a cracked gas. A hydrocarbon feed enters a C2 distributor column. The top of the C2 distributor column is thermally coupled to an ethylene distributor column, and the bottoms liquid of a C2 distributor column feeds a deethanizer column. The C2 distributor column utilizes a conventional reboiler. The top of the ethylene distributor is thermally coupled with a demethanizer column, and the bottoms liquid of the ethylene distributor feeds a C2 splitter column. The ethylene distributor column utilizes a conventional reboiler. The deethanizer and C2 splitter columns are also thermally coupled and operated at a substantially lower pressure than the C2 distributor column, the ethylene distributor column, and the demethanizer column. Alternatively, a hydrocarbon feed enters a deethanizer column. The top of the deethanizer is thermally coupled to an ethylene distributor column, and the ethylene distributor column utilizes a conventional reboiler. The top of the ethylene distributor column is thermally coupled with a demethanizer column, and the bottoms liquid of the ethylene distributor column feeds a C2 splitter column. The C2 splitter column operates at a pressure substantially lower than the ethylene distributor column, the demethanizer column, and the deethanizer column.

Reyneke, Rian (Katy, TX); Foral, Michael (Aurora, IL); Papadopoulos, Christos G. (Naperville, IL); Logsdon, Jeffrey S. (Naperville, IL); Eng, Wayne W. Y. (League City, TX); Lee, Guang-Chung (Houston, TX); Sinclair, Ian (Warrington, GB)

2007-12-25T23:59:59.000Z

129

Water distillation using waste engine heat from an internal combustion engine  

E-Print Network [OSTI]

To meet the needs of forward deployed soldiers and disaster relief personnel, a mobile water distillation system was designed and tested. This system uses waste engine heat from the exhaust flow of an internal combustion ...

Mears, Kevin S

2006-01-01T23:59:59.000Z

130

Feeding Value of Wet Sorghum Distillers Grains for Growing and Finishing Beef Cattle  

E-Print Network [OSTI]

Feeding Value of Wet Sorghum Distillers Grains for Growing and Finishing Beef Cattle Ethanol, but sorghum grain is commonly either blended with corn before use or used as the sole grain for ethanol

131

Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

132.9 1,418.3 See footnotes at end of table. 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil Volumes by PAD District and State Energy Information Administration ...

132

Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil...  

Gasoline and Diesel Fuel Update (EIA)

839.2 135.0 1,251.9 See footnotes at end of table. 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil Volumes by PAD District and State Energy Information Administration ...

133

Overview of used antifreeze and industrial glycol recycling by vacuum distillation  

SciTech Connect (OSTI)

A leading method of reclaiming ethylene glycol from both used automotive coolants and waste industrial glycol streams is vacuum distillation. Over 15 million gallons per year of total glycols are recovered by this technology, which are marketed for use in antifreeze and industrial chemicals. It is a robust technology, tolerant of many common feed contaminants, and producing minimum waste. This paper presents an overview of vacuum distillation as one part of a multistep process for recovering glycols from a wide variety of feedstreams. Described are industry practices for laboratory prescreening of feedstreams, process adjustments and pretreatments, distillation technologies and post-distillation polishing methods. In each section, information and data are presented from two independent facilities and for several streams processed at each facility. It is concluded that the facilities participating in this study can reliably produce ethylene glycol suitable for the production of ASTM specification engine coolants.

Frye, D.K. [Filter Recovery Services, Alexandria, VA (United States); Chan, K.; Pourhassanian, C. [DeMenno/Kerdoon, Inc., Compton, CA (United States)

1999-08-01T23:59:59.000Z

134

The Scaleup of Structured Packing from Distillation Pilot Plant Testing to Commercial Application  

E-Print Network [OSTI]

fractionator was performed, it was necessary to inventory the column with feed and, under total reflux conditions, draw off distillate or bottoms product until the proper composition profile was achieved. To investigate various design options, both... stream by a factor of five. In summary, from the customer's point of view, the application of structured packing to the main fractionator in the SFP fractionation train is a cOOluercial success. NEW DISTILLATION DEVELOPMENT PILOT PLANT Since...

Berven, O. J.; Ulowetz, M. A.

135

Experimental and analytical studies of hydrocarbon yields under dry-, steam-, and steam-with-propane distillation  

E-Print Network [OSTI]

EXPERIMENTAL AND ANALYTICAL STUDIES OF HYDROCARBON YIELDS UNDER DRY-, STEAM-, AND STEAM-WITH- PROPANE DISTILLATION A Dissertation by NAMIT JAISWAL Submitted to the Office of Graduate Studies of Texas A&M University...-WITH- PROPANE-DISTILLATION A Dissertation by NAMIT JAISWAL Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY Approved...

Jaiswal, Namit

2007-09-17T23:59:59.000Z

136

PILOT-SCALE REMOVAL OF FLUORIDE FROM LEGACY PLUTONIUM MATERIALS USING VACUUM SALT DISTILLATION  

SciTech Connect (OSTI)

Between September 2009 and January 2011, the Savannah River National Laboratory (SRNL) and HB-Line designed, developed, tested, and successfully deployed a system for the distillation of chloride salts. In 2011, SRNL adapted the technology for the removal of fluoride from fluoride-bearing salts. The method involved an in situ reaction between potassium hydroxide (KOH) and the fluoride salt to yield potassium fluoride (KF) and the corresponding oxide. The KF and excess KOH can be distilled below 1000{deg}C using vacuum salt distillation (VSD). The apparatus for vacuum distillation contains a zone heated by a furnace and a zone actively cooled using either recirculated water or compressed air. During a vacuum distillation operation, a sample boat containing the feed material is placed into the apparatus while it is cool, and the system is sealed. The system is evacuated using a vacuum pump. Once a sufficient vacuum is attaned, heating begins. Volatile salts distill from the heated zone to the cooled zone where they condense, leaving behind the non-volatile material in the feed boat. Studies discussed in this report were performed involving the use of non-radioactive simulants in small-scale and pilot-scale systems as well as radioactive testing of a small-scale system with plutonium-bearing materials. Aspects of interest include removable liner design considerations, boat materials, in-line moisture absorption, and salt deposition.

Pierce, R. A.; Pak, D. J.

2012-09-11T23:59:59.000Z

137

Distillate Fuel Oil Refinery, Bulk Terminal, and Natural Gas Plant Stocks  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phasesDataTranslocation oftheAmperometric Detectioneffect of pH andCO

138

Distribution of higher n-alkanes in partially frozen middle-distillate fuels. Final report, October 1982-September 1984  

SciTech Connect (OSTI)

In conjunction with continuing studies on the effect of composition on the freezing points of middle distillate fuels, attention was directed to partially frozen fuels. The crystals and residual liquid from partially frozen JP-5 and DFM fuel samples derived from both petroleum and shale were separated from each other and collected by means of the NRL liquid-solid separator apparatus (LSS) at several temperatures below the freezing points of the original samples. The original fuel samples, the solid material (precipitate), and liquid (filtrate) were characterized by gas chromatography (GC). The filtrate data were straightforward. As expected, Van't Hoff plot of the n-alkanes concentrations (log concentrations vs reciprocal absolute temperature) formed straight lines, and their slopes demonstrated the importance of the higher n-alkanes in fuel crystallization at cold temperatures. The precipitate data presented some problems of interpretation since it was observed that the waxy crystal precipitate matrix entrapped significant amounts of liquid (filtrate). The data on solid which were obtained by these methods demonstrated that the higher n-alkanes play the key role in fuel crystallization at low temperatures, concentrating as much as tenfold in the crystallized solids compared to the liquid. Also, it was clearly shown that the n-alkanes form the major part, up to least 95% by weight in some fuels, of the solid crystals formed.

Van Winkle, T.L.; Affens, W.A.; Beal, E.J.; Hazlett, R.N.; DeGuzman, J.

1985-04-10T23:59:59.000Z

139

Waste Heat Recovery and Recycling in Thermal Separation Processes: Distillation, Multi-Effect Evaporation (MEE) and Crystallization Processes  

SciTech Connect (OSTI)

Evaporation and crystallization are key thermal separation processes for concentrating and purifying inorganic and organic products with energy consumption over 1,000 trillion Btu/yr. This project focused on a challenging task of recovering low-temperature latent heat that can have a paradigm shift in the way thermal process units will be designed and operated to achieve high-energy efficiency and significantly reduce the carbon footprint as well as water footprint. Moreover, this project has evaluated the technical merits of waste-heat powered thermal heat pumps for recovery of latent heat from distillation, multi-effect evaporation (MEE), and crystallization processes and recycling into the process. The Project Team has estimated the potential energy, economics and environmental benefits with the focus on reduction in CO2 emissions that can be realized by 2020, assuming successful development and commercialization of the technology being developed. Specifically, with aggressive industry-wide applications of heat recovery and recycling with absorption heat pumps, energy savings of about 26.7 trillion Btu/yr have been estimated for distillation process. The direct environmental benefits of this project are the reduced emissions of combustible products. The estimated major reduction in environmental pollutants in the distillation processes is in CO2 emission equivalent to 3.5 billion lbs/year. Energy consumption associated with water supply and treatments can vary between 1,900 kWh and 23,700 kWh per million-gallon water depending on sources of natural waters [US DOE, 2006]. Successful implementation of this technology would significantly reduce the demand for cooling-tower waters, and thereby the use and discharge of water treatment chemicals. The Project Team has also identified and characterized working fluid pairs for the moderate-temperature heat pump. For an MEE process, the two promising fluids are LiNO3+KNO3+NANO3 (53:28:19 ) and LiNO3+KNO3+NANO2(53:35:12). And for an H2O2 distillation process, the two promising fluids are Trifluoroethanol (TFE) + Triethylene Glycol Dimethyl ether (DMETEG) and Ammonia+ Water. Thermo-physical properties calculated by Aspen+ are reasonably accurate. Documentation of the installation of pilot-plants or full commercial units were not found in the literature for validating thermo-physical properties in an operating unit. Therefore, it is essential to install a pilot-scale unit to verify thermo-physical properties of working fluid pairs and validate the overall efficiency of the thermal heat pump at temperatures typical of distillation processes. For an HO2 process, the ammonia-water heat pump system is more compact and preferable than the TFE-DMETEG heat pump. The ammonia-water heat pump is therefore recommended for the H2O2 process. Based on the complex nature of the heat recovery system, we anticipated that capital costs could make investments financially unattractive where steam costs are low, especially where co-generation is involved. We believe that the enhanced heat transfer equipment has the potential to significantly improve the performance of TEE crystallizers, independent of the absorption heat-pump recovery system. Where steam costs are high, more detailed design/cost engineering will be required to verify the economic viability of the technology. Due to the long payback period estimated for the TEE open system, further studies on the TEE system are not warranted unless there are significant future improvements to heat pump technology. For the H2O2 distillation cycle heat pump waste heat recovery system, there were no significant process constraints and the estimated 5 years payback period is encouraging. We therefore recommend further developments of application of the thermal heat pump in the H2O2 distillation process with the focus on the technical and economic viability of heat exchangers equipped with the state-of-the-art enhancements. This will require additional funding for a prototype unit to validate enhanced thermal performances of heat transfer equipment, evaluat

Emmanuel A. Dada; Chandrakant B. Panchal; Luke K. Achenie; Aaron Reichl; Chris C. Thomas

2012-12-03T23:59:59.000Z

140

Residuals, Sludge, and Composting (Maine)  

Broader source: Energy.gov [DOE]

The Maine Department of Environmental Protection's Residuals, Sludge, and Composting program regulates the land application and post-processing of organic wastes, including sewage sludge, septage,...

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

The cough response to ultrasonically nebulized distilled water in heart-lung transplantation patients  

SciTech Connect (OSTI)

As a result of clinical heart-lung transplantation, the lungs are denervated below the level of the tracheal anastomosis. It has been questioned whether afferent vagal reinnervation occurs after surgery. Here we report the cough frequency, during inhalation of ultrasonically nebulized distilled water, of 15 heart-lung transplant patients studied 6 wk to 36 months after surgery. They were compared with 15 normal subjects of a similar age and sex. The distribution of the aerosol was studied in five normal subjects using /sup 99m/technetium diethylene triamine pentaacetate (/sup 99m/Tc-DTPA) in saline. In seven patients, the sensitivity of the laryngeal mucosa to instilled distilled water (0.2 ml) was tested at the time of fiberoptic bronchoscopy by recording the cough response. Ten percent of the aerosol was deposited onto the larynx and trachea, 56% on the central airways, and 34% in the periphery of the lung. The cough response to the aerosol was strikingly diminished in the patients compared with normal subjects (p less than 0.001), but all seven patients coughed when distilled water was instilled onto the larynx. As expected, the laryngeal mucosa of heart-lung transplant patients remains sensitive to distilled water. However, the diminished coughing when the distilled water is distributed by aerosol to the central airways supports the view that vagal afferent nerves do not reinnervate the lungs after heart-lung transplantation, up to 36 months after surgery.

Higenbottam, T.; Jackson, M.; Woolman, P.; Lowry, R.; Wallwork, J.

1989-07-01T23:59:59.000Z

142

Source book for planning nuclear dual-purpose electric/distillation desalination plants  

SciTech Connect (OSTI)

A source book on nuclear dual-purpose electric/distillation desalination plants was prepared to assist government and other planners in preparing broad evaluations of proposed applications of dual-purpose plants. The document is divided into five major sections. Section 1 presents general discussions relating to the benefits of dual-purpose plants, and spectrum for water-to-power ratios. Section 2 presents information on commercial nuclear plants manufactured by US manufacturers. Section 3 gives information on distillation desalting processes and equipment. Section 4 presents a discussion on feedwater pretreatment and scale control. Section 5 deals with methods for coupling the distillation and electrical generating plants to operate in the dual mode.

Reed, S.A.

1981-02-01T23:59:59.000Z

143

Characteristics of naphthenic and paraffinic hydrocarbons of residual oil from West Siberian crudes  

SciTech Connect (OSTI)

This article examines the naphthenic/paraffinic hydrocarbons segregated by liquid chromatography from a residual oil after removal of the resins and solid hydrocarbons. The studied hydrocarbons were fractionated on the basis of molecular weight (by molecular distillation) and on the basis of the content of rings (by thermal diffusion separation in a laboratory column). The results of mass-spectrometric analysis indicate that the first fraction consists mainly of isoparaffins and naphthenes with few rings. The polycyclic condensed naphthenes are concentrated in the last fraction. The content of isoparaffins drops off and the content of condensed polycyclic naphthenic structures increases from the second fraction to the next to the last. It is concluded that the naphthenic/paraffinic hydrocarbons of the residual oil from mixed West Siberian crudes have a relatively narrow composition and therefore have similar physicochemical properties.

Detusheva, E.P.; Khramtsova, L.P.; Muchinskii, T.D.; Shkol'nikov, V.M.

1984-05-01T23:59:59.000Z

144

The Products of the Destructive Distillation of Keratin in the Form of Leather  

E-Print Network [OSTI]

ure to the air. After this came a white crystal­ line solid, fourth a reddish fciquid, fifth a red­ dish crystalline compound and sixth the black oil spoken of abovd. A volume of the distillate, equaling about a liter was collected and the two... the material the temperature rose to 200° C. and then reduction started and the temperature fell rapidly. The tar or oil constitutes from 3 to 4 per cent of the weight of the leather used. The aqueous portion of the distillate was subjected to a fractional...

Rose, Reed Phillips

1913-01-01T23:59:59.000Z

145

Process for converting heavy oil deposited on coal to distillable oil in a low severity process  

DOE Patents [OSTI]

A process for removing oil from coal fines that have been agglomerated or blended with heavy oil comprises the steps of heating the coal fines to temperatures over 350.degree. C. up to 450.degree. C. in an inert atmosphere, such as steam or nitrogen, to convert some of the heavy oil to lighter, and distilling and collecting the lighter oils. The pressure at which the process is carried out can be from atmospheric to 100 atmospheres. A hydrogen donor can be added to the oil prior to deposition on the coal surface to increase the yield of distillable oil.

Ignasiak, Teresa (417 Heffernan Drive, Edmonton, Alberta, CA); Strausz, Otto (13119 Grand View Drive, Edmonton, Alberta, CA); Ignasiak, Boleslaw (417 heffernan Drive, Edmonton, Alberta, CA); Janiak, Jerzy (17820 - 76 Ave., Edmonton, Alberta, CA); Pawlak, Wanda (3046 - 11465 - 41 Avenue, Edmonton, Alberta, CA); Szymocha, Kazimierz (3125 - 109 Street, Edmonton, Alberta, CA); Turak, Ali A. (Edmonton, CA)

1994-01-01T23:59:59.000Z

146

Efficient use of an intermediate reboiler or condenser in a binary distillation  

SciTech Connect (OSTI)

The impact of an intermediate reboiler or condenser on the distillation of ideal binary mixtures into pure product streams is studied using a simplified model. The advantage of heuristics derived from this study is that they can quickly tell a process engineer if an intermediate reboiler or condenser is going to be effective in improving the efficiency and, of the two options, which one would be more effective. The heuristics simply states that if the actual fraction of liquid in a given feed is less than that with the maximum thermodynamic efficiency for distillation with no intermediate reboiler or condenser, then an intermediate condenser not only substantially improves the thermodynamic efficiency but is also more effective than an intermediate reboiler. An analogous heuristics exists for the intermediate reboiler when the fraction of liquid in the feed is greater than the optimum. Quick identification of cases that can achieve a substantial improvement in efficiency provides an incentive to search for the proper utilities needed for the intermediate reboiler or condenser. When relatively pure feed streams (concentration of either component greater than 90%) are distilled, the extremely low efficiencies of distillation can be remarkably improved by using an intermediate reboiler or condenser.

Agrawal, R.; Herron, D.M. [Air Products and Chemicals, Inc., Allentown, PA (United States)] [Air Products and Chemicals, Inc., Allentown, PA (United States)

1998-06-01T23:59:59.000Z

147

Integrated Column Designs for Minimum Energy and Entropy Requirements in Multicomponent Distillation  

E-Print Network [OSTI]

prefer a process where the energy may be supplied at a low temperature and cooling may be supplied law). This leads us to the reversible Petlyuk arrangement. However the total required heat supply). A characteristic of the reversible distillation column is that some of the heat is supplied continuously along

Skogestad, Sigurd

148

Middle distillate hydrotreatment zeolite catalysts containing Pt/Pd or Ni  

E-Print Network [OSTI]

A study on middle distillate hydrotreatment zeolite catalysts containing Pt/Pd and/or Ni was performed. The effect of the addition of the corresponding CoMo, CoMoPd, CoMoPtPd and CoMoNi in PdNiPt-zeolite, Pt-zeolite, Ni-zeolite, and Pd...

Marin-Rosas, Celia

2009-05-15T23:59:59.000Z

149

UV Resonance Raman Characterization of Polycyclic Aromatic Hydrocarbons in Coal Liquid Distillates*  

E-Print Network [OSTI]

UV Resonance Raman Characterization of Polycyclic Aromatic Hydrocarbons in Coal Liquid Distillates samples, such as petroleum and coal, or for man-made samples, such as coal liquids, a major desire- nique for studying coal-liquid samples. 1-4 We demon- strated that the Raman spectra of polycyclic

Asher, Sanford A.

150

Distillate fuel-oil processing for phosphoric acid fuel-cell power plants  

SciTech Connect (OSTI)

The current efforts to develop distillate oil-steam reforming processes are reviewed, and the applicability of these processes for integration with the fuel cell are discussed. The development efforts can be grouped into the following processing approaches: high-temperature steam reforming (HTSR); autothermal reforming (ATR); autothermal gasification (AG); and ultra desulfurization followed by steam reforming. Sulfur in the feed is a key problem in the process development. A majority of the developers consider sulfur as an unavoidable contaminant of distillate fuel and are aiming to cope with it by making the process sulfur-tolerant. In the HTSR development, the calcium aluminate catalyst developed by Toyo Engineering represents the state of the art. United Technology (UTC), Engelhard, and Jet Propulsion Laboratory (JPL) are also involved in the HTSR research. The ATR of distillate fuel is investigated by UTC and JPL. The autothermal gasification (AG) of distillate fuel is being investigated by Engelhard and Siemens AG. As in the ATR, the fuel is catalytically gasified utilizing the heat generated by in situ partial combustion of feed, however, the goal of the AG is to accomplish the initial breakdown of the feed into light gases and not to achieve complete conversion to CO and H/sub 2/. For the fuel-cell integration, a secondary reforming of the light gases from the AG step is required. Engelhard is currently testing a system in which the effluent from the AG section enters the steam-reforming section, all housed in a single vessel. (WHK)

Ushiba, K. K.

1980-02-01T23:59:59.000Z

151

Graphical Visualisation of Minimum Energy Requirements for Multi-Effect Distillation Arrangements  

E-Print Network [OSTI]

1 Graphical Visualisation of Minimum Energy Requirements for Multi-Effect Distillation Arrangements of this paper is to present a simple graphical method for obtaining the energy usage and to compare the energy of Chemical Engineering, 7491 Trondheim, Norway Abstract The minimum energy requirements of six different heat

Skogestad, Sigurd

152

Hybrid magic state distillation for universal fault-tolerant quantum computation  

E-Print Network [OSTI]

A set of stabilizer operations augmented by some special initial states known as 'magic states', gives the possibility of universal fault-tolerant quantum computation. However, magic state preparation inevitably involves nonideal operations that introduce noise. The most common method to eliminate the noise is magic state distillation (MSD) by stabilizer operations. Here we propose a hybrid MSD protocol by connecting a four-qubit H-type MSD with a five-qubit T-type MSD, in order to overcome some disadvantages of the previous MSD protocols. The hybrid MSD protocol further integrates distillable ranges of different existing MSD protocols and extends the T-type distillable range to the stabilizer octahedron edges. And it provides considerable improvement in qubit cost for almost all of the distillable range. Moreover, we experimentally demonstrate the four-qubit H-type MSD protocol using nuclear magnetic resonance technology, together with the previous five-qubit MSD experiment, to show the feasibility of the hybrid MSD protocol.

Wenqiang Zheng; Yafei Yu; Jian Pan; Jingfu Zhang; Jun Li; Zhaokai Li; Dieter Suter; Xianyi Zhou; Xinhua Peng; Jiangfeng Du

2014-12-11T23:59:59.000Z

153

Effect of Narrow Cut Oil Shale Distillates on HCCI Engine Performance  

SciTech Connect (OSTI)

In this investigation, oil shale crude obtained from the Green River Formation in Colorado using Paraho Direct retorting was mildly hydrotreated and distilled to produce 7 narrow boiling point fuels of equal volumes. The resulting derived cetane numbers ranged between 38.3 and 43.9. Fuel chemistry and bulk properties strongly correlated with boiling point.

Eaton, Scott J [ORNL; Bunting, Bruce G [ORNL; Lewis Sr, Samuel Arthur [ORNL; Fairbridge, Craig [National Centre for Upgrading Technology, Canada

2009-01-01T23:59:59.000Z

154

Black-Box Identification for PLC based MPC of a Binary Distillation Column  

E-Print Network [OSTI]

Black-Box Identification for PLC based MPC of a Binary Distillation Column B. Huyck ,, F. Logist J is to upgrade the control system with a linear MPC running on a PLC. However, before a model based controller can be used on a PLC, an accurate (but simple) process model has to be constructed. Hence, the aim

155

HYDROGEN DISTILLATION AT THE DEUTERIUM REMOVAL UNIT OF MuCap EXPERIMENT  

E-Print Network [OSTI]

321 HYDROGEN DISTILLATION AT THE DEUTERIUM REMOVAL UNIT OF MuCap EXPERIMENT I.A. Alekseev, E hydrogen gas (so- called protium) must be used. It is necessary to avoid transfers of - to impurities imposes strict and critical requirements on the hydrogen gas system supporting the detector. Desirable

Titov, Anatoly

156

Prices of Refiner No. 2 Distillate Sales to End Users  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2007 10,998 9,933 10,998 10,643 10,998throughThousand CubicWashington Natural Gas Exports (Dollars per1.840

157

Prime Supplier Sales Volumes of No. 2 Distillate  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2007 10,998 9,933 10,998 10,643 10,998throughThousand CubicWashington Natural Gas Exports (Dollars145,896.4

158

Stocks of Distillate Fuel Oil 15 ppm Sulfur and Under  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S. NaturalA. Michael Schaal Director, Oil and10:InformationSteam Coal109,433

159

Stocks of Distillate Fuel Oil Greater Than 500 ppm Sulfur  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S. NaturalA. Michael Schaal Director, Oil and10:InformationSteam

160

Chemical Characterization of Individual Particles and Residuals...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Individual Particles and Residuals of Cloud Droplets and Ice Crystals Collected On Board Research Chemical Characterization of Individual Particles and Residuals of Cloud Droplets...

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

DISSOLUTION OF NEPTUNIUM OXIDE RESIDUES  

SciTech Connect (OSTI)

This report describes the development of a dissolution flowsheet for neptunium (Np) oxide (NpO{sub 2}) residues (i.e., various NpO{sub 2} sources, HB-Line glovebox sweepings, and Savannah River National Laboratory (SRNL) thermogravimetric analysis samples). Samples of each type of materials proposed for processing were dissolved in a closed laboratory apparatus and the rate and total quantity of off-gas were measured. Samples of the off-gas were also analyzed. The quantity and type of solids remaining (when visible) were determined after post-dissolution filtration of the solution. Recommended conditions for dissolution of the NpO{sub 2} residues are: Solution Matrix and Loading: {approx}50 g Np/L (750 g Np in 15 L of dissolver solution), using 8 M nitric acid (HNO{sub 3}), 0.025 M potassium fluoride (KF) at greater than 100 C for at least 3 hours. Off-gas: Analysis of the off-gas indicated nitric oxide (NO), nitrogen dioxide (NO{sub 2}) and nitrous oxide (N{sub 2}O) as the only identified components. No hydrogen (H{sub 2}) was detected. The molar ratio of off-gas produced per mole of Np dissolved ranged from 0.25 to 0.4 moles of gas per mole of Np dissolved. A peak off-gas rate of {approx}0.1 scfm/kg bulk oxide was observed. Residual Solids: Pure NpO{sub 2} dissolved with little or no residue with the proposed flowsheet but the NpCo and both sweepings samples left visible solid residue after dissolution. For the NpCo and Part II Sweepings samples the residue amounted to {approx}1% of the initial material, but for the Part I Sweepings sample, the residue amounted to {approx}8 % of the initial material. These residues contained primarily aluminum (Al) and silicon (Si) compounds that did not completely dissolve under the flowsheet conditions. The residues from both sweepings samples contained minor amounts of plutonium (Pu) particles. Overall, the undissolved Np and Pu particles in the residues were a very small fraction of the total solids.

Kyser, E

2009-01-12T23:59:59.000Z

162

Single-Step Syngas-to-Distillates (S2D) Process Based on Biomass-Derived Syngas – A Techno-Economic Analysis  

SciTech Connect (OSTI)

This study reports the comparison of biomass gasification based syngas-to-distillate (S2D) systems using techno-economic analysis (TEA). Three cases, state of technology (SOT) case, goal case, and conventional case, were compared in terms of performance and cost. The SOT case and goal case represent technology being developed at Pacific Northwest National Laboratory for a process starting with syngas using a single-step dual-catalyst reactor for distillate generation (S2D process). The conventional case mirrors the two-step S2D process previously utilized and reported by Mobil using natural gas feedstock and consisting of separate syngas-to-methanol and methanol-to-gasoline (MTG) processes. Analysis of the three cases revealed that the goal case could indeed reduce fuel production cost over the conventional case, but that the SOT was still more expensive than the conventional. The SOT case suffers from low one-pass yield and high selectivity to light hydrocarbons, both of which drive up production cost. Sensitivity analysis indicated that light hydrocarbon yield, single pass conversion efficiency, and reactor space velocity are the key factors driving the high cost for the SOT case.

Zhu, Yunhua; Jones, Susanne B.; Biddy, Mary J.; Dagle, Robert A.; Palo, Daniel R.

2012-08-01T23:59:59.000Z

163

APPLICATION OF VACUUM SALT DISTILLATION TECHNOLOGY FOR THE REMOVAL OF FLUORIDE  

SciTech Connect (OSTI)

Vacuum distillation of chloride salts from plutonium oxide (PuO{sub 2}) and simulant PuO{sub 2} has been previously demonstrated at Department of Energy (DOE) sites using kilogram quantities of chloride salt. The apparatus for vacuum distillation contains a zone heated using a furnace and a zone actively cooled using either recirculated water or compressed air. During a vacuum distillation operation, a sample boat containing the feed material is placed into the apparatus while it is cool, and the system is sealed. The system is evacuated using a vacuum pump. Once a sufficient vacuum is attained, heating begins. Volatile salts distill from the heated zone to the cooled zone where they condense, leaving behind the non-volatile materials in the feed boat. The application of vacuum salt distillation (VSD) is of interest to the HB-Line Facility and the MOX Fuel Fabrication Facility (MFFF) at the Savannah River Site (SRS). Both facilities are involved in efforts to disposition excess fissile materials. Many of these materials contain chloride and fluoride salt concentrations which make them unsuitable for dissolution without prior removal of the chloride and fluoride salts. Between September 2009 and January 2011, the Savannah River National Laboratory (SRNL) and HB-Line designed, developed, tested, and successfully deployed a system for the distillation of chloride salts. Subsequent efforts are attempting to adapt the technology for the removal of fluoride. Fluoride salts of interest are less-volatile than the corresponding chloride salts. Consequently, an alternate approach is required for the removal of fluoride without significantly increasing the operating temperature. HB-Line Engineering requested SRNL to evaluate and demonstrate the feasibility of an alternate approach using both non-radioactive simulants and plutonium-bearing materials. Whereas the earlier developments targeted the removal of sodium chloride (NaCl) and potassium chloride (KCl), the current activities are concerned with the removal of the halide ions associated with plutonium trifluoride (PuF{sub 3}), plutonium tetrafluoride (PuF{sub 4}), calcium fluoride (CaF{sub 2}), and calcium chloride (CaCl{sub 2}). This report discusses non-radioactive testing of small-scale and pilot-scale systems and radioactive testing of a small-scale system. Experiments focused on demonstrating the chemistry for halide removal and addressing the primary engineering questions associated with a change in the process chemistry.

Pierce, R.; Pak, D.

2011-08-10T23:59:59.000Z

164

Future perspectives of using hollow fibers as structured packings in light hydrocarbon distillation  

SciTech Connect (OSTI)

Olefin and paraffin are the largest chemical commodities. Furthermore, they are major building blocks for the petrochemical industry. Each year, petroleum refining, consumes 4,500 TBtu/yr in separation energy, making it one of the most energy-intensive industries in the United States). Just considering liquefied petroleum gas (ethane/propane/butane) and olefins (ethylene and propylene) alone, the distillation energy consumption is about 400 TBtu/yr in the US. Since petroleum distillation is a mature technology, incremental improvements in column/tray design will only provide a few percent improvements in the performance. However, each percent saving in net energy use amounts to savings of 10 TBtu/yr and reduces CO{sub 2} emissions by 0.2 MTon/yr. In practice, distillation columns require 100 to 200 trays to achieve the desired separation. The height of a transfer unit (HTU) of conventional packings is typical in the range of 36-60 inch. Since 2006, we had explored using several non-selective membranes as the structured packings to replace the conventional packing materials used in propane and propylene distillation. We obtained the lowest HTU of < 8 inch for the hollow fiber column, which was >5 times shorter than that of the conventional packing materials. In 2008, we also investigated this type of packing materials in iso-/n-butane distillation. Because of a slightly larger relative volatility of iso-/n-butane than that of propane/propylene, a wider and a more stable operational range was obtained for the iso-/n-butane pair. However, all of the experiments were conducted on a small scale with flowrate of < 25 gram/min. Recently, we demonstrated this technology on a larger scale (<250 gram/min). Within the loading range of F-factor < 2.2 Pa{sup 0.5}, a pressure drop on the vapor side is below 50 mbar/m, which suggests that the pressure drop of hollow fibers packings is not an engineering barrier for the applications in distillations. The thermal stability study suggests that polypropylene hollow fibers are stable after a long time exposure to C{sub 2} - C{sub 4} mixtures. The effects of packing density on the separation efficiency will be discussed.

Yang, Dali [Los Alamos National Laboratory; Orler, Bruce [Los Alamos National Laboratory; Tornga, Stephanie [Los Alamos National Laboratory; Welch, Cindy [Los Alamos National Laboratory

2011-01-26T23:59:59.000Z

165

Structural group analysis of residues from Athabasca bitumen  

SciTech Connect (OSTI)

Non-distillable fractions of hydrocarbons such as bitumen are a challenge for analysis because of their molecular complexity and high heteroatom content. One method for characterizing their composition is by analysis for a relatively small number of structures expected to predominate in the mixture, i.e. for the significant structural groups. Because NMR spectroscopy can give quantitative data on the distribution of hydrogen and carbon types, it is an ideal method for group-based analysis. This study uses a structural group formalism which combines data from several analytical methods into a single profile. Residue fractions derived from Athabasca bitumen were investigated to determine the different chemical structures which could have an impact on subsequent processing. Structural analysis is the identification of key structures from analytical data that characterize a complex mixture. Higher accuracy data, from elemental, /sup 1/H-NMR, IR and titration analyses, are used to construct balance equations which must be satisfied. The spectral envelope of /sup 13/C-NMR is more difficult to resolve quantatitively, and hence /sup 13/C-NMR data are used as constraints to compute the concentrations of structural groups. The mathematical notation and methods have been presented previously. The structural analysis transforms the spectrometric data into a more useable form; the maximum number of groups that can be calculated is limited to the number of useful analytical measurements.

Gray, M.R.; Choi, J.H.K.; Egiebor, N.O.; Kirchen, R.P.; Sanford, E.C.

1988-06-01T23:59:59.000Z

166

Interactive chemical effects and instability of shale derived middle distillate fuels  

SciTech Connect (OSTI)

This paper presents a study of instability of shale-derived fuels. Changes in fuel properties with time have been a continuing problem in the use of middle distillate fuels. The authors define instability as the formation of insoluble sediments and gums as well as the production of peroxides and color bodies. Nitrogen and sulfur heterocycles have long been implicated in fuel degradation, but present knowledge is limited regarding the chemistry of their autoxidation reactions in the complex fuel media. Based on the GC/MS identification of nitrogen heterocyclic constituents in several shale-derived middle distillate fuels, the authors have conducted gravimetric instability tests employing three model nitrogen heterocycles in shale-derived diesel fuels. Model sulfur compound dopant studies on shale-derived jet fuels were conducted by monitoring hydroperoxide formation/decomposition and the decreased quantity of sulfur compound. Potential interactive effects have been defined for these model dopants.

Mushrush, G.W.; Beal, E.J.; Watkins, J.M.; Morris, R.E.; Hardy, D.R. (Fuels Section, Naval Research Lab., Washington, DC (US))

1989-01-01T23:59:59.000Z

167

The distribution of n-alkanes in partially frozen middle distillate fuels  

SciTech Connect (OSTI)

This work on partially frozen fuels is one of a continuing series of studies on the effect of composition on the freezing properties of hydrocarbon fuels. The method used for this purpose was reported previously. By means of this method the authors were able to determine the composition of the liquid and solid phases in partially frozen mixtures consisting of liquid and of solid crystals plus entrapped liquid. This paper presents the results of this study on five different middle distillate fuels.

Van Winkle, T.L.; Affens, W.A.; Beal, E.J.; Hazlett, R.N.; Guzman, J.

1986-04-01T23:59:59.000Z

168

Energy Savings Accomplished by Replacing Steam Ejectors with Electric Driven Vacuum Pumps in Crude Distillation Vacuum Towers  

E-Print Network [OSTI]

The low cost of steam combined with the maintenance free operation of steam ejectors has assured their unquestioned use in providing the necessary vacuum for crude distillation vacuum towers. However, the cost of steam production has risen...

Nelson, R. E.

1982-01-01T23:59:59.000Z

169

Hydrogenation of aromatics in synthetic crude distillates catalyzed by platinum supported in molecular sieves  

SciTech Connect (OSTI)

Catalytic hydrogenation of synthetic crude distillates from Canadian oil sands was carried out over platinum metal supported in pillared interlayered clay (PILC) and Y-zeolite. The molecular sieve supports were employed to modify the properties of dispersed platinum particles and improve their resistance to poisoning by sulfur. The objective was to reduce the distillate aromatic content to meet diesel emission control standards and cetane number requirements. Catalysts were prepared in a series of steps, and metal precursor was loaded using ion-exchange procedures. Characterization was done using X-ray diffraction, hydrogen chemisorption, and proton-induced X-ray emission elemental analysis. Catalytic hydrogenation reactions were carried out by processing distillate feedstocks both high (>100 ppm) and low (<10 ppm) in sulfur using a continuous-flow automated microreactor system. Experimental runs were performed to determine the reaction kinetics and Arrhenius parameters as a means of evaluating and comparing catalyst performance. Significant differences in catalyst activity were found. The Pt/Y-zeolite-alumina catalyst showed a much superior hydrogenation performance under conditions of high sulfur content. The extent of cracking and ring opening was also evaluated and was shown to be minimal under the operating conditions employed.

Kimbara, N.; Charland, J.P. [CANMET, Ottawa, Ontario (Canada)] [CANMET, Ottawa, Ontario (Canada); Wilson, M.F. [CANMET, Devon, Alberta (Canada)] [CANMET, Devon, Alberta (Canada)

1996-11-01T23:59:59.000Z

170

Magnetocaloric properties of distilled gadolinium: Effects of structural inhomogeneity and hydrogen impurity  

SciTech Connect (OSTI)

High-purity Gd prepared by distillation is a structurally inhomogeneous system consisting of needle-shaped crystals of cross section 0.5–2.5??m with near-c-axis orientation embedded in a matrix of nanosized (30–100?nm) grains. By measuring the magnetocaloric effect (MCE) directly, we find that the MCE values differ markedly for the plate-shaped samples cut out of a distillate along and perpendicular to the crystals. The effect of small controlled amounts of impurity (hydrogen) on the properties of distilled Gd is further studied. We observe opposite trends in the MCE response to hydrogen charging with respect to the crystal's orientation within the samples and discuss mechanisms interrelating the unique structural morphology with the impurity behavior. As an overall assessment, the Curie temperatures of ?-GdH{sub x} solid solutions increase from 291?K up to 294?K when increasing hydrogen concentration x from 0 to 0.15. Hydrogenation is found to broaden the ferromagnetic-to-paramagnetic phase transition. Hydrogen-containing specimens demonstrate reversibility of MCE at these temperatures.

Burkhanov, G. S.; Kolchugina, N. B.; Chzhan, V. B.; Chistyakov, O. D. [Baikov Institute of Metallurgy and Materials Science RAS, 119991 Moscow (Russian Federation); Tereshina, E. A. [Institute of Physics ASCR, 18221 Prague (Czech Republic); Tereshina, I. S. [Baikov Institute of Metallurgy and Materials Science RAS, 119991 Moscow (Russian Federation); International Laboratory of High Magnetic Fields and Low Temperatures PAS, 53-421 Wroclaw (Poland); Faculty of Physics, Lomonosov Moscow State University, 119991 Moscow (Russian Federation); Politova, G. A. [Baikov Institute of Metallurgy and Materials Science RAS, 119991 Moscow (Russian Federation); International Laboratory of High Magnetic Fields and Low Temperatures PAS, 53-421 Wroclaw (Poland); Badurski, D.; Drulis, H. [Institute of Low Temperature and Structure Research PAS, 50-950 Wroclaw (Poland); Paukov, M.; Havela, L. [Department of Condensed Matter Physics, Faculty of Mathematics and Physics, Charles University, 12116 Prague (Czech Republic)

2014-06-16T23:59:59.000Z

171

A novel proportional--integral-derivative control configuration with application to the control of batch distillation  

SciTech Connect (OSTI)

The aim of this paper is to propose a novel proportional-integral-derivative (PID) control configuration based on an observer structure. Batch distillation is used as the base case study where the regulated output is the distillate composition. The proposed PID control law is derived in the framework of robust nonlinear control with modeling error compensation techniques. A reduced-order observer is proposed to estimate both the derivative of the regulated output and the underlying modeling error. These observations are subsequently used in a control loop to feedback variations of distillate composition (derivative feedback) and to counteract the effects of modeling errors. It is shown that, under certain conditions, the resulting control law is equivalent to a classical PID controller with an antireset windup scheme. Moreover, the tuning of the controller is performed very easily in terms of a prescribed closed-loop time constant and an estimation time constant. Numerical results are provided for binary and multicomponent separations. Sampled/delayed measurements and several sources of uncertainties are considered in order to provide a realistic test scenario for the proposed control design procedure.

Alvarez-Ramirez, J.; Monroy-Loperena, R.; Cervantes, I.; Morales, A.

2000-02-01T23:59:59.000Z

172

Measuring depth profiles of residual stress with Raman spectroscopy  

SciTech Connect (OSTI)

Knowledge of the variation of residual stress is a very important factor in understanding the properties of machined surfaces. The nature of the residual stress can determine a part`s susceptibility to wear deformation, and cracking. Raman spectroscopy is known to be a very useful technique for measuring residual stress in many materials. These measurements are routinely made with a lateral resolution of 1{mu}m and an accuracy of 0.1 kbar. The variation of stress with depth; however, has not received much attention in the past. A novel technique has been developed that allows quantitative measurement of the variation of the residual stress with depth with an accuracy of 10nm in the z direction. Qualitative techniques for determining whether the stress is varying with depth are presented. It is also demonstrated that when the stress is changing over the volume sampled, errors can be introduced if the variation of the stress with depth is ignored. Computer aided data analysis is used to determine the depth dependence of the residual stress.

Enloe, W.S.; Sparks, R.G.; Paesler, M.A.

1988-12-01T23:59:59.000Z

173

Copolymers useful as additives for lowering the cloud point of middle hydrocarbon distillates, and compositions of middle hydrocarbon distillates comprising them  

SciTech Connect (OSTI)

Products useful as additives for lowering the cloud point of middle distillates have a molecular weight from 1,000 to 50,000, and are obtained by reacting a compound of the formula R-Z((CH/sub 2/) /SUB n/ NH) /SUB m/ H or HO-CH/sub 2/-R'-NH/sub 2/ where R is a monovalent saturated aliphatic radical of 1-30 carbon atoms, Z is -NH- or oxygen, n is 2 to 4, m is zero or 1 to 4 and R' is a saturated divalent aliphatic radical of 1-18 carbon atoms, with a copolymer comprising recurrent units (A) from an alkyl ester of an unsaturated monocarboxylic acid and/or a vinyl ester of a saturated monocarboxylic acid, recurrent units (B) from diisobutylene and recurrent units (C) from an unsaturated a,b-dicarboxylic compound.

Durand, J. P.; Damin, B.; Dawans, F.; Leger, R.

1985-03-05T23:59:59.000Z

174

Transforms for prediction residuals in video coding  

E-Print Network [OSTI]

Typically the same transform, the 2-D Discrete Cosine Transform (DCT), is used to compress both image intensities in image coding and prediction residuals in video coding. Major prediction residuals include the motion ...

Kam??l?, Fatih

2010-01-01T23:59:59.000Z

175

Rapid prediction of various physical properties for middle distillate fuel utilizing directly coupled liquid chromatography//sup 1/H nuclear magnetic resonance  

SciTech Connect (OSTI)

A group property approach has been developed to predict 17 physical properties of middle distillate (e.g., jet and diesel) fuels from experimentally derived liquid chromatography//sup 1/H nuclear magnetic resonance (LC//sup 1/H NMR) data. In the LC//sup 1/H NMR technique, the fuel is separated according to chemical class and the average molecular structure for each chemical class is then calculated. These average molecular structures form a basis set to predict the physical properties of the fuel. The physical properties that can be obtained in this manner are cetane number, cetane index, density, specific gravity, pour point, flash point, viscosity, filterability, heat of combustion, cloud point, volume percent aromatics, residual carbon content, and the initial, 10%, 50%, 90%, and end boiling points. Fourteen of the correlation coefficients for the predictions are better than 0.90 with 11 of the predictions falling either within or approximately equal to the ASTM method reproducibility for the measurement of the fuel property. The present method also provides chemical insight concerning the influence of chemical structural changes on the physical properties of the fuel as well as requiring much less analysis time and sample volume than corresponding ASTM methods.

Caswell, K.A.; Glass, T.E.; Swann, M.; Dorn, H.C.

1989-02-01T23:59:59.000Z

176

A method for the rapid, accurate prediction of the physical properties of middle distillate fuels from LC- sup 1 H NMR derived data  

SciTech Connect (OSTI)

A method has been developed whereby various physical properties of middle distillate fuels may be rapidly and accurately calculated by a group property approach from data obtained from a directly coupled Liquid Chromatograph - {sup 1}H Nuclear Magnetic Resonance Spectrometer (LC-{sup 1}H NMR). The physical properties include cetane number, cetane index, density, specific gravity, pour point, flash point, viscosity, filterability, heat of combustion, cloud point, volume percent aromatics, residual carbon content, and initial, 10%, 50%, 90%, and end boiling points. These property predictions have accuracies approaching the error for measurement of the experimental physical property and require less than two hours analysis time per fuel. An interface was developed between the NMR spectrometer and a personal computer to aid in automation of the LC-{sup 1}H NMR data collection and to perform off-line analysis of the LC-{sup 1}H NMR data. This interface and all associated software is described. Also presented is a series of model compounds studies in which the physical properties of pure hydrocarbons (i.e., alkanes, monocyclic and dicyclic aromatics) were predicted by a similar group property approach.

Caswell, K.A.

1988-01-01T23:59:59.000Z

177

Design, start up, and three years operating experience of an ammonia scrubbing, distillation, and destruction plant  

SciTech Connect (OSTI)

When the rebuilt Coke Plant started operations in November of 1992, it featured a completely new closed circuit secondary cooler, ammonia scrubbing, ammonia distillation, and ammonia destruction plants. This is the second plant of this type to be built in North America. To remove the ammonia from the gas, it is scrubbed with three liquids: Approximately 185 gallons/minute of cooled stripped liquor from the ammonia stills; Light oil plant condensate; and Optionally, excess flushing liquor. These scrubbers typically reduce ammonia content in the gas from 270 Grains/100 standard cubic feet to 0.2 Grains/100 standard cubic feet.

Gambert, G.

1996-12-31T23:59:59.000Z

178

,"U.S. Distillate Fuel Oil and Kerosene Sales by End Use"  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National and Regional Data; Row: NAICS Codes; Column: EnergyShale ProvedTexas"Brunei (Dollars perReserves (Billion Cubic Feet)"+ LeaseDistillate

179

Method and apparatus for assessing distillate-fuel stability by oxygen overpressure  

SciTech Connect (OSTI)

Reactions leading to insoluble sediments formation in distillate fuel are accelerated by forcing oxygen into solution in the fuel at pressures of between about 90 and 110 psig and then stressing the fuel under conditions of accelerated storage at temperatures of between about 40 C to 100 C. The method then makes use of gravimetric determination of the total insoubles formed. The stability of the fuel over a period of time as well as its comparitive stability to other fuels can then be predicted from the amount of insolubles formed. The method can be carried out by using a specialized pressure vessel.

Hardy, D.R.; Beal, E.J.; Burnett, J.C.

1989-06-27T23:59:59.000Z

180

Process to recycle shredder residue  

DOE Patents [OSTI]

A system and process for recycling shredder residue, in which separating any polyurethane foam materials are first separated. Then separate a fines fraction of less than about 1/4 inch leaving a plastics-rich fraction. Thereafter, the plastics rich fraction is sequentially contacted with a series of solvents beginning with one or more of hexane or an alcohol to remove automotive fluids; acetone to remove ABS; one or more of EDC, THF or a ketone having a boiling point of not greater than about 125.degree. C. to remove PVC; and one or more of xylene or toluene to remove polypropylene and polyethylene. The solvents are recovered and recycled.

Jody, Bassam J. (Chicago, IL); Daniels, Edward J. (Oak Lawn, IL); Bonsignore, Patrick V. (Channahon, IL)

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Magic State Distillation and Gate Compilation in Quantum Algorithms for Quantum Chemistry  

E-Print Network [OSTI]

Quantum algorithms for quantum chemistry map the dynamics of electrons in a molecule to the dynamics of a coupled spin system. To reach chemical accuracy for interesting molecules, a large number of quantum gates must be applied which implies the need for quantum error correction and fault-tolerant quantum computation. Arbitrary fault-tolerant operations can be constructed from a small, universal set of fault-tolerant operations by gate compilation. Quantum chemistry algorithms are compiled by decomposing the dynamics of the coupled spin-system using a Trotter formula, synthesizing the decomposed dynamics using Clifford operations and single-qubit rotations, and finally approximating the single-qubit rotations by a sequence of fault-tolerant single-qubit gates. Certain fault-tolerant gates rely on the preparation of specific single-qubit states referred to as magic states. As a result, gate compilation and magic state distillation are critical for solving quantum chemistry problems on a quantum computer. We review recent progress that has improved the efficiency of gate compilation and magic state distillation by orders of magnitude.

Colin J. Trout; Kenneth R. Brown

2015-01-29T23:59:59.000Z

182

Magic State Distillation and Gate Compilation in Quantum Algorithms for Quantum Chemistry  

E-Print Network [OSTI]

Quantum algorithms for quantum chemistry map the dynamics of electrons in a molecule to the dynamics of a coupled spin system. To reach chemical accuracy for interesting molecules, a large number of quantum gates must be applied which implies the need for quantum error correction and fault-tolerant quantum computation. Arbitrary fault-tolerant operations can be constructed from a small, universal set of fault-tolerant operations by gate compilation. Quantum chemistry algorithms are compiled by decomposing the dynamics of the coupled spin-system using a Trotter formula, synthesizing the decomposed dynamics using Clifford operations and single-qubit rotations, and finally approximating the single-qubit rotations by a sequence of fault-tolerant single-qubit gates. Certain fault-tolerant gates rely on the preparation of specific single-qubit states referred to as magic states. As a result, gate compilation and magic state distillation are critical for solving quantum chemistry problems on a quantum computer. We review recent progress that has improved the efficiency of gate compilation and magic state distillation by orders of magnitude.

Colin J. Trout; Kenneth R. Brown

2015-01-07T23:59:59.000Z

183

Optimum Requirements for the Synthesis of Biodiesel Using Fatty Acid Distillates  

E-Print Network [OSTI]

The optimum requirements of temperature, retention time, mole ratio of reactants and catalyst for the direct synthesis of biodiesel from fatty acid distillates of palm kernel oil using tetraoxosulphate (VI) acid as catalyst was studied. The following parameters were used for the efficient and economic production of biodiesel: eight (8) moles of methanol per mole of fatty acid, 0.06 mole of tetraoxosulphate (VI) acid per mole of fatty acid, a retention time of sixty (60) minutes and reaction temperature of 65 OC. And this gave a maximum percentage yield of 98.4. Other parameters obtained include: an acid value of 0.1683 mg KOH/g, iodine value of 15.3549, flash point of 209 OC, viscosity of 3.7957 mm2s-1, density of 0.8776 g cm-3, water content of 400.05 mg kg-1, soap content of 2.30 mg/kg, and ester content of 98.804 %. From the obtained parameters, the biodiesel produced from fatty acid distillates of palm kernel oil reaches prescribed international standards for biodiesel production.

Akunna E. Ejele

184

Phase Chemistry of Tank Sludge Residual Components  

SciTech Connect (OSTI)

The US Department of Energy (DOE) has millions of gallons of high level nuclear waste stored in underground tanks at Hanford, Washington and Savannah River, South Carolina. These tanks will eventually be emptied and decommissioned. This will leave a residue of sludge adhering to the interior tank surfaces that may contaminate nearby groundwaters with radionuclides and RCRA metals. Performance assessment (PA) calculations must be carried out prior to closing the tanks. This requires developing radionuclide release models from the sludges so that the PA calculations can be based on credible source terms. These efforts continued to be hindered by uncertainties regarding the actual nature of the tank contents and the distribution of radionuclides among the various phases. In particular, it is of vital importance to know what radionuclides are associated with solid sludge components. Experimentation on actual tank sludges can be difficult, dangerous and prohibitively expensive. The research funded under this grant for the past three years was intended to provide a cost-effective method for developing the needed radionuclide release models using non-radioactive artificial sludges. Insights gained from this work will also have more immediate applications in understanding the processes responsible for heel development in the tanks and in developing effective technologies for removing wastes from the tanks.

J.L. Krumhansl

2002-04-02T23:59:59.000Z

185

Residual stress patterns in steel welds  

SciTech Connect (OSTI)

Neutron strain scanning of residual stress is a valuable nondestructive tool for evaluation of residual stress in welds. The penetrating characteristic of neutrons permits mapping of strain patterns with a spatial resolution approaching 1mm at depths of 20mm in steels. While the overall patterns of the residual stress tensor in a weld are understood, the detailed patterns depend on welding process parameters and the effects of solid state transformation. The residual strain profiles in two multi-pass austenitic welds and a ferritic steel weld are presented. The stress-free lattice parameters within the fusion zone and the adjacent heat affected zone in the two austenitic welds show that the interpretation of residual stress from strains are affected by welding parameters. An interpretation of the residual strain pattern in the ferritic steel plate can be made using the strain measurements of a Gleeble test bar which has undergone the solid state austenite decomposition.

Spooner, S.; Hubbard, C.R.; Wang, X.L.; David, S.A.; Holden, T.M. [Oak Ridge National Lab., TN (United States); Root, J.H.; Swainson, I. [Atomic Energy of Canada Ltd., Chalk River, ON (Canada)

1994-12-31T23:59:59.000Z

186

Residual Toxicities of Insecticides to Cotton Insects.  

E-Print Network [OSTI]

the effects of simulated wind and rain on the residues. Tempera- ture and humidity conditions incident to the holding period were sufficient to destroy most of the residual toxicity of this material. Effect of Simulated Wind Among the chlorinated... hydrocarbon insecticides, there was little difference between the effects of simu- lated wind and rain on residual toxicities. However, it is likely that under field conditions the effects of rain would be more noticeable. Simulated wind was less damaging...

Hightower, B. G.; Gaines, J. C.

1960-01-01T23:59:59.000Z

187

Methods of separating particulate residue streams  

DOE Patents [OSTI]

A particulate residue separator and a method for separating a particulate residue stream may include an air plenum borne by a harvesting device, and have a first, intake end and a second, exhaust end; first and second particulate residue air streams that are formed by the harvesting device and that travel, at least in part, along the air plenum and in a direction of the second, exhaust end; and a baffle assembly that is located in partially occluding relation relative to the air plenum and that substantially separates the first and second particulate residue air streams.

Hoskinson, Reed L. (Rigby, ID); Kenney, Kevin L. (Idaho Falls, ID); Wright, Christopher T. (Idaho Falls, ID); Hess, J. Richard (Idaho Falls, ID)

2011-04-05T23:59:59.000Z

188

Particulate residue separators for harvesting devices  

SciTech Connect (OSTI)

A particulate residue separator and a method for separating a particulate residue stream may include a plenum borne by a harvesting device, and have a first, intake end and a second, exhaust end; first and second particulate residue air streams which are formed by the harvesting device and which travel, at least in part, along the plenum and in a direction of the second, exhaust end; and a baffle assembly which is located in partially occluding relation relative to the plenum, and which substantially separates the first and second particulate residue air streams.

Hoskinson, Reed L.; Kenney, Kevin L.; Wright, Christopher T.; Hess, John R.

2010-06-29T23:59:59.000Z

189

Experimental study of oil yields and properties of light and medium Venezuelan crude oils under steam and steam-propane distillation  

E-Print Network [OSTI]

Six experimental runs were carried out to study the yields for a light crude oil (34.2°API) and an intermediate crude oil (25.1°API) under steam distillation and steam-propane distillation. Yields, were measured at five temperatures, 110, 150, 200...

Plazas Garcia, Joyce Vivia

2002-01-01T23:59:59.000Z

190

Theoretical Analysis of an Ideal Noiseless Linear Amplifier for Einstein-Podolsky-Rosen Entanglement Distillation  

E-Print Network [OSTI]

We study the operational regime of a noiseless linear amplifier based on quantum scissors that can nondeterministically amplify the one photon component of a quantum state with weak excitation. It has been shown that an arbitrarily large quantum state can be amplified by first splitting it into weak excitation states using a network of beamsplitters. The output states of the network can then be coherently recombined. In this paper, we analyse the performance of such a device for distilling entanglement after transmission through a lossy quantum channel, and look at two measures to determine the efficacy of the noiseless linear amplifier. The measures used are the amount of entanglement achievable and the final purity of the output amplified entangled state. We study the performances of both a single and a two-element noiseless linear amplifier for amplifying weakly excited states. Practically, we show that it may be advantageous to work with a limited number of stages.

J. Bernu; S. Armstrong; T. Symul; T. C. Ralph; P. K. Lam

2014-11-03T23:59:59.000Z

191

Upgrading of middle distillate fractions of syncrudes from athabasca oil sands  

SciTech Connect (OSTI)

Middle distillate fractions of syncrudes from Athabasca Oil Sands were evaluated for suitability as feedstocks in the catalytic conversion to diesel fuel meeting cetane number specifications. Hydrogenation of aromatic components to napthenes under severe conditions (380 to 400/sup 0/C, 2500 psig) using sulfided CoO/MoO/sub 3/ and NiO/WO/sub 3/ over ..cap alpha.. . Al/sub 2/O/sub 3/ in a previously described catalyst testing system. Reaction products were analyzed for aromatic carbon content using C/sup 13/ NMR spectroscopy and pseudo first order rate constants and activation energies (15.0 and 14.2 kcal 1 g-mole, respectively) were determined by regression analysis. At optimum conditions 97% aromatic conversion was obtained with the Ni-W catalyst. Product diesel fuel cetane number (42) was within specifications. Co-Mo catalyst was significantly less active.

Wilson, M.F.; Kriz, J.F.

1983-03-01T23:59:59.000Z

192

Dynamics and control of a heterogeneous azeotropic distillation column: Conventional control approach  

SciTech Connect (OSTI)

In this work, bifurcation analysis and dynamic simulation were used to investigate the optimum conventional control strategy of an isopropyl alcohol (IPA), cyclohexane (CyH), and water (H{sub 2}O) heterogeneous azeotropic column. Steady-state process analysis shows that the optimal operation point should be located at a critical reflux, a transition point at which the distillation path switches from a route that passes through the IPA + H{sub 2}O azeotrope to one that passes through the IPA + CyH azeotrope. A good control strategy must be able to maintain a steady column temperature profile that shows a plateau near 70 C to ensure passage around the IPA + CyH azeotrope. An inverse double-loop control strategy is proposed based on principal component analysis. This scheme is capable of maintaining the desired column temperature profile given all kinds of feed disturbances, thus keeping the product IPA purity at the desired level.

Chien, I.L. [National Taiwan Univ. of Science and Technology, Taipei (Taiwan, Province of China). Dept. of Chemical Engineering; Wang, C.J.; Wong, D.S.H. [National Tsing Hua Univ., Hsinchu (Taiwan, Province of China). Dept. of Chemical Engineering

1999-02-01T23:59:59.000Z

193

Re-refining of Waste Oil Solvent Is Used in Treatment/Distillation Process  

E-Print Network [OSTI]

INDUSTRIAL APPLICATION. A combination solvent treatment/distillation process has been designed for re-refining industrial waste oil (such as equipment lubricants, metal-working oil, and process oil) and used automotive lubricants (engine oil, hydraulic oil, and gear oil) for reuse. WASTE ENERGY RECOVERY. Recycling of waste oil in the United States has the potential to save the energy equivalent of 7-12 million bbl of crude oil annually.1 WASTE OIL RECOVERY. Prior to 1960, a significant portion of the demand for automotive lubricating oil was met by re-relined used oil. At the time, 150 re-refineries produced 300 million gal of motor oil annually. Since 1960, however, the production of re-refined oil has steadily declined. In 1981, for example, out of about 1.2 billion gal of automobile lubricating oil and 1.6 billion gal of industrial lubricating oils purchased, 25 U.S. rerefineries

unknown authors

194

On local indistinguishability of orthogonal pure states by using a bound on distillable entanglement  

E-Print Network [OSTI]

We show that the four states a|00>+b|11>, b^*|00>-a^*|11>, c|01>+d|10> and d^*|01>-c^*|10> cannot be discriminated with certainty if only local operations and classical communication (LOCC) are allowed and if only a single copy is provided, except in the case when they are simply |00>, |11>, |01> and |10> (in which case they are trivially distinguishable with LOCC). We go on to show that there exists a continuous range of values of a, b, c and d such that even three states among the above four are not locally distinguishable, if only a single copy is provided. The proof follows from the fact that logarithmic negativity is an upper bound of distillable entanglement.

Sibasish Ghosh; Guruprasad Kar; Anirban Roy; Debasis Sarkar; Aditi Sen De; Ujjwal Sen

2001-11-25T23:59:59.000Z

195

Why methyl tert-butyl ether production by reactive distillation may yield multiple solutions  

SciTech Connect (OSTI)

This paper presents an explanation of why methyl tert-butyl ether (MTBE) production by reactive distillation may yield multiple solutions. Widely different composition profiles and conversions may, as already reported by Krishna and others, results with identical column specifications, depending on the initial estimates provided. A hypothesis yielding a qualitative understanding of this phenomenon has been developed. The inert n-butene plays a key role in the proposed explanation: As the reaction mixture is diluted with n-butene, the activity coefficient of methanol increases substantially and the temperature decreases. This dilution has a profound effect on the equilibrium conversion, enabling MTBE to escape from the reactive zone without decomposition. When methanol is fed below or in the lower part of the reactive zone of the column, the ``lifting capacity`` of the minimum boiling point MTBE-methanol azeotrope will also be important.

Hauan, S.; Hertzberg, T.; Lien, K.M. [Univ. of Trondheim (Norway)

1995-03-01T23:59:59.000Z

196

Characterization Report on Sand, Slag, and Crucible Residues and on Fluoride Residues  

SciTech Connect (OSTI)

This paper reports on the chemical characterization of the sand, slag, and crucible (SS and C) residues and the fluoride residues that may be shipped from the Rocky Flats Environmental Technology Site (RFETS) to Savannah River Site (SRS).

Murray, A.M.

1999-02-10T23:59:59.000Z

197

Supporting Information for Historical gaseous and primary aerosol emissions in  

E-Print Network [OSTI]

2104002XXX Bituminous/ Subbituminous Coal Distillate oil 2104004XXX Distillate Oil SO2, PM Natural gas Bituminous/ Subbituminous Coal 101003XX Lignite 2101002XXX Electric Utility Bituminous/ Subbituminous Coal Residual oil 101004XX External Combustion Boilers Residual Oil NOx, SO2, PM 2101005XXX Electric Utility

Meskhidze, Nicholas

198

Assigning a Value to Dried Distillers' Grains as a Protein Supplement in Cattle Consuming Low-Quality Forage  

E-Print Network [OSTI]

Cattle consuming low-quality forage may have decreased forage organic matter intake as a result of decreased nitrogen (N) intake. To date, a value has not been assigned to dried distillers' grains as a protein supplement to cattle consuming low...

Rambo, Zachary Joseph

2011-08-08T23:59:59.000Z

199

Kinetics of hydrogenation of aromatics determined by carbon-13 NMR for Athabasca bitumen-derived middle distillates  

SciTech Connect (OSTI)

High aromatics content in middle distillates is detrimental to fuel quality, as shown in such properties as smoke point of jet fuel and cetane number of diesel fuel. In the petroleum and petrochemical industries the yields from fluid catalytic cracking or steam cracking units are adversely affected by high aromatics content in the feedstock. Distillates obtained from oil sand bitumen, heavy oils, or coal liquefaction products are particularly high in aromatics. Reducing the concentration of this class of compounds is important. Aromatics hydrogenation (AHYD) is one option to achieve this result. In the current Syncrude operation a primary objective of hydrotreating is to reduce product sulfur and nitrogen contents; reducing aromatics content is an incidental result. However, the expansion plan currently under study by Syncrude includes further AHYD to improve cetane number. Predicting the product aromatics content is an important issue for this study. In the present study, hydrotreating of five Athabasca-bitumen-derived gas oils was conducted in pilot scale trickle-bed reactors using alumina-based commercial NiMo catalysts. Feedstocks originated from the distillation of virgin bitumen, and from distillates derived from treating bitumen in a fluid coker and hydrocracking pilot plant. Aromatics content was determined by the {sup 13}C NMR method. The previously developed rate equation for AHYD was modified by including power terms for space velocity and hydrogen partial pressure. The data were analyzed using the modified equation.

Yui, S.M.; Sanford, E.C. (Syncrude Canada Ltd., Edmonton, Alberta (Canada))

1987-04-01T23:59:59.000Z

200

Asymptotics for GARCH Squared Residual Correlations  

E-Print Network [OSTI]

Asymptotics for GARCH Squared Residual Correlations Istv'an Berkes \\Lambda A. R'enyi Institute a GARCH(p; q) model. Denoting by â?? r n (k); k â?? 1; these autocorrelations computed from a realization words and phrases: GARCH(p; q) sequence, quasi--maximum likelihood esti­ mator, squared residuals

Kokoszka, Piotr

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

University of Pittsburgh Residual Funds on  

E-Print Network [OSTI]

University of Pittsburgh Residual Funds on FINANCIAL GUIDELINE Subject: Sponsored Projects I by the sponsor. Funds cannot be unilaterally retained by the University. Failure to return residual funds related funds on sponsored grants and contracts on the financial accounting records of the University

Sibille, Etienne

202

Data Conversion in Residue Number System  

E-Print Network [OSTI]

for direct conversion when interaction with the real analog world is required. We first develop two efficient schemes for direct analog-to-residue conversion. Another efficient scheme for direct residue analogique réel est nécessaire. Nous dévelopons deux systèmes efficaces pour la conversion directe du domaine

Zilic, Zeljko

203

Total Imports of Residual Fuel  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S. NaturalA. Michael SchaalNovember 26, 2008 (Next1,Product: Total9,216

204

Injection, flow, and mixing of CO2 in porous media with residual gas.  

SciTech Connect (OSTI)

Geologic structures associated with depleted natural gas reservoirs are desirable targets for geologic carbon sequestration (GCS) as evidenced by numerous pilot and industrial-scale GCS projects in these environments world-wide. One feature of these GCS targets that may affect injection is the presence of residual CH{sub 4}. It is well known that CH{sub 4} drastically alters supercritical CO{sub 2} density and viscosity. Furthermore, residual gas of any kind affects the relative permeability of the liquid and gas phases, with relative permeability of the gas phase strongly dependent on the time-history of imbibition or drainage, i.e., dependent on hysteretic relative permeability. In this study, the effects of residual CH{sub 4} on supercritical CO{sub 2} injection were investigated by numerical simulation in an idealized one-dimensional system under three scenarios: (1) with no residual gas; (2) with residual supercritical CO{sub 2}; and (3) with residual CH{sub 4}. We further compare results of simulations that use non-hysteretic and hysteretic relative permeability functions. The primary effect of residual gas is to decrease injectivity by decreasing liquid-phase relative permeability. Secondary effects arise from injected gas effectively incorporating residual gas and thereby extending the mobile gas plume relative to cases with no residual gas. Third-order effects arise from gas mixing and associated compositional effects on density that effectively create a larger plume per unit mass. Non-hysteretic models of relative permeability can be used to approximate some parts of the behavior of the system, but fully hysteretic formulations are needed to accurately model the entire system.

Oldenburg, C.M.; Doughty, C.A.

2010-09-01T23:59:59.000Z

205

Residual stress in nanocrystalline nickel tungsten electrodeposits  

E-Print Network [OSTI]

Characterizing the residual stress of thick nanocrystalline electrodeposits poses several unique challenges due to their fine grain structure, thickness distribution, and matte surface. We employ a three-dimensional ...

Ziebell, Tiffany D. (Tiffany Dawn)

2011-01-01T23:59:59.000Z

206

SAR impulse response with residual chirps.  

SciTech Connect (OSTI)

A Linear Frequency-Modulated (LFM) chirp is a function with unit amplitude and quadratic phase characteristic. In a focused Synthetic Aperture Radar (SAR) image, a residual chirp is undesired for targets of interest, as it coarsens the manifested resolution. However, for undesired spurious signals, a residual chirp is often advantageous because it spreads the energy and thereby diminishes its peak value. In either case, a good understanding of the effects of a residual LFM chirp on a SAR Impulse Response (IPR) is required to facilitate system analysis and design. This report presents an analysis of the effects of a residual chirp on the IPR. As reference, there is a rich body of publications on various aspects of LFM chirps. A quick search reveals a plethora of articles, going back to the early 1950s. We mention here purely as trivia one of the earlier analysis papers on this waveform by Klauder, et al.

Doerry, Armin Walter

2009-06-01T23:59:59.000Z

207

Microwave pyrolysis of distillers dried grain with solubles (DDGS) for biofuel production  

SciTech Connect (OSTI)

Microwave pyrolysis of distillers dried grain with solubles (DDGS) was investigated to determine the effects of pyrolytic conditions on the yields of bio-oil, syngas, and biochar. Pyrolysis process variables included reaction temperature, time, and power input. Microwave pyrolysis of DDGS was analyzed using response surface methodology to ?nd out the effect of process variables on the biofuel (bio-oil and syn- gas) conversion yield and establish prediction models. Bio-oil recovery was in the range of 26.5–50.3 wt.% of the biomass. Biochar yields were 23.5–62.2% depending on the pyrolysis conditions. The energy con- tent of DDGS bio-oils was 28 MJ/kg obtained at the 650 oC and 8 min, which was about 66.7% of the heat- ing value of gasoline. GC/MS analysis indicated that the biooil contained a series of important and useful chemical compounds: aliphatic and aromatic hydrocarbons. At least 13% of DDGS bio-oil was the same hydrocarbon compounds found in regular unleaded gasoline.

Lei, Hanwu; Ren, Shoujie; Wang, Lu; Bu, Quan; Julson, James; Holladay, Johnathan E.; Ruan, Roger

2011-05-01T23:59:59.000Z

208

Recovery of Navy distillate fuel from reclaimed product. Volume II. Literature review  

SciTech Connect (OSTI)

In an effort to assist the Navy to better utilize its waste hydrocarbons, NIPER, with support from the US Department of Energy, is conducting research designed to ultimately develop a practical technique for converting Reclaimed Product (RP) into specification Naval Distillate Fuel (F-76). This first phase of the project was focused on reviewing the literature and available information from equipment manufacturers. The literature survey has been carefully culled for methodology applicable to the conversion of RP into diesel fuel suitable for Navy use. Based upon the results of this study, a second phase has been developed and outlined in which experiments will be performed to determine the most practical recycling technologies. It is realized that the final selection of one particular technology may be site-specific due to vast differences in RP volume and available facilities. A final phase, if funded, would involve full-scale testing of one of the recommended techniques at a refueling depot. The Phase I investigations are published in two volumes. Volume 1, Technical Discussion, includes the narrative and Appendices I and II. Appendix III, a detailed Literature Review, includes both a narrative portion and an annotated bibliography containing about 800 references and abstracts. This appendix, because of its volume, has been published separately as Volume 2.

Brinkman, D.W.; Whisman, M.L.

1984-11-01T23:59:59.000Z

209

Recovery of Navy distillate fuel from reclaimed product. Volume I. Technical discussion  

SciTech Connect (OSTI)

In an effort to assist the Navy to better utilize its waste hydrocarbons, NIPER, with support from the US Department of Energy, is conducting research designed to ultimately develop a practical technique for converting Reclaimed Product (RP) into specification Naval Distillate Fuel (F-76). The first phase of the project was focused on reviewing the literature and available information from equipment manufacturers. The literature survey has been carefully culled for methodology applicable to the conversion of RP into diesel fuel suitable for Navy use. Based upon the results of this study, a second phase has been developed and outlined in which experiments will be performed to determine the most practical recycling technologies. It is realized that the final selection of one particular technology may be site-specific due to vast differences in RP volume and available facilities. A final phase, if funded, would involve full-scale testing of one of the recommended techniques at a refueling depot. The Phase I investigations are published in two volumes. Volume 1, Technical Discussion, includes the narrative and Appendices I and II. Appendix III, a detailed Literature Review, includes both a narrative portion and an annotated bibliography containing about 800 referenvces and abstracts. This appendix, because of its volume, has been published separately as Volume 2. 18 figures, 4 tables.

Brinkman, D.W.; Whisman, M.L.

1984-11-01T23:59:59.000Z

210

ABSTRACT: Bioenergy Harvesting Technologies to Supply Crop Residues...  

Energy Savers [EERE]

ABSTRACT: Bioenergy Harvesting Technologies to Supply Crop Residues In a Densified Large Square Bale Format ABSTRACT: Bioenergy Harvesting Technologies to Supply Crop Residues In a...

211

Quageo-D-06-00012 (Revised sept.2006) Residual thermoluminescence for sun-bleached quartz: dependence on pre-exposure radiation  

E-Print Network [OSTI]

1 Quageo-D-06-00012 (Revised sept.2006) Title Residual thermoluminescence for sun-bleached quartz irradiated - either in the laboratory, or naturally in volcanic deposits - were exposed to sunlight for several months prior to TL measurements. As a result, the residual TL, either Blue or Red, appeared

Paris-Sud XI, Université de

212

FEDERAL RESERVE BANK OF DALLASWhat Drives Natural Gas Prices?  

E-Print Network [OSTI]

Abstract: For many years, fuel switching between natural gas and residual fuel oil kept natural gas prices closely aligned with those for crude oil. More recently, however, the number of U.S. facilities able to switch between natural gas and residual fuel oil has declined, and over the past five years, U.S. natural gas prices have been on an upward trend with crude oil prices but with considerable independent movement. Natural gas market analysts generally emphasize weather and inventories as drivers of natural gas prices. Using an error-correction model, we show that when these and other additional factors are taken into account, movements in crude oil prices have a prominent role in shaping natural gas prices. Our findings imply a continuum of prices at which natural gas and petroleum products are substitutes.

Stephen P. A. Brown; Mine K. Yücel; Stephen P. A. Brown; Mine K. Yücel

2007-01-01T23:59:59.000Z

213

Update of distillers grains displacement ratios for corn ethanol life-cycle analysis.  

SciTech Connect (OSTI)

Production of corn-based ethanol (either by wet milling or by dry milling) yields the following coproducts: distillers grains with solubles (DGS), corn gluten meal (CGM), corn gluten feed (CGF), and corn oil. Of these coproducts, all except corn oil can replace conventional animal feeds, such as corn, soybean meal, and urea. Displacement ratios of corn-ethanol coproducts including DGS, CGM, and CGF were last updated in 1998 at a workshop at Argonne National Laboratory on the basis of input from a group of experts on animal feeds, including Prof. Klopfenstein (University of Nebraska, Lincoln), Prof. Berger (University of Illinois, Urbana-Champaign), Mr. Madson (Rapheal Katzen International Associates, Inc.), and Prof. Trenkle (Iowa State University) (Wang 1999). Table 1 presents current dry milling coproduct displacement ratios being used in the GREET model. The current effort focuses on updating displacement ratios of dry milling corn-ethanol coproducts used in the animal feed industry. Because of the increased availability and use of these coproducts as animal feeds, more information is available on how these coproducts replace conventional animal feeds. To glean this information, it is also important to understand how industry selects feed. Because of the wide variety of available feeds, animal nutritionists use commercial software (such as Brill Formulation{trademark}) for feed formulation. The software recommends feed for the animal on the basis of the nutritional characteristics, availability, and price of various animal feeds, as well as on the nutritional requirements of the animal (Corn Refiners Association 2006). Therefore, feed formulation considers both the economic and the nutritional characteristics of feed products.

Arora, S.; Wu, M.; Wang, M.; Energy Systems

2011-02-01T23:59:59.000Z

214

BY HOW MUCH CAN RESIDUAL MINIMIZATION ACCELERATE THE CONVERGENCE OF ORTHOGONAL RESIDUAL METHODS?  

E-Print Network [OSTI]

. Examples of such pairs are the conjugate gradient (CG) and the conjugate residual (CR) methods, the full-minimal residual (QMR) methods. Also the pairs consisting of the (bi)conjugate gradient squared (CGS, iterative method, Krylov space method, conjugate gradient method, biconjugate gradient method, CG, CGNE

Gutknecht, Martin H.

215

Definition of heavy oil and natural bitumen  

SciTech Connect (OSTI)

Definition and categorization of heavy oils and natural bitumens are generally based on physical or chemical attributes or on methods of extraction. Ultimately, the hydrocarbon's chemical composition will govern both its physical state and the extraction technique applicable. These oils and bitumens closely resemble the residuum from wholecrude distillation to about 1,000/degree/F; if the residuum constitutes at least 15% of the crude, it is considered to be heavy. In this material is concentrated most of the trace elements, such as sulfur, oxygen, and nitrogen, and metals, such as nickel and vanadium. A widely used definition separates heavy oil from natural bitumen by viscosity, crude oil being less, and bitumen more viscous than 10,000 cp. Heavy crude then falls in the range 10/degree/-20/degree/ API inclusive and extra-heavy oil less than 10/degree/ API. Most natural bitumen is natural asphalt (tar sands, oil sands) and has been defined as rock containing hydrocarbons more viscous than 10,000 cp or else hydrocarbons that may be extracted from mined or quarried rock. Other natural bitumens are solids, such as gilsonite, grahamite, and ozokerite, which are distinguished by streak, fusibility, and solubility. The upper limit for heavy oil may also be set at 18/degree/ API, the approximate limit for recovery by waterflood.

Meyer, R.F.

1988-08-01T23:59:59.000Z

216

Residual oil conversion in Ashland FCC Units  

SciTech Connect (OSTI)

Ashland Petroleum Company is a production-poor refining and marketing company. A company must have refining flexibility to compete in today's crude and marketing situation. Ashland has adopted a dual approach to achieving the required refining flexibility: development and construction of the RCC process, and development of techniques to practice residual oil conversion in Ashland FCC units. This paper discusses the operating techniques Ashland has used to allow residual oil conversion to be practiced in their present day FCC's and shows some of the yields which have been achieved.

Barger, D.F.; Miller, C.B.

1983-03-01T23:59:59.000Z

217

Residual dust charges in discharge afterglow  

SciTech Connect (OSTI)

An on-ground measurement of dust-particle residual charges in the afterglow of a dusty plasma was performed in a rf discharge. An upward thermophoretic force was used to balance the gravitational force. It was found that positively charged, negatively charged, and neutral dust particles coexisted for more than 1 min after the discharge was switched off. The mean residual charge for 200-nm-radius particles was measured. The dust particle mean charge is about -5e at a pressure of 1.2 mbar and about -3e at a pressure of 0.4 mbar.

Coueedel, L.; Mikikian, M.; Boufendi, L.; Samarian, A. A. [GREMI - Groupe de Recherches sur l'Energetique des Milieux Ionises, CNRS/Universite d'Orleans, 14 rue d'Issoudun, 45067 Orleans Cedex 2 (France); School of Physics A28, University of Sydney, NSW 2006 (Australia)

2006-08-15T23:59:59.000Z

218

Evaluation of the residue from microset on various metal surfaces.  

SciTech Connect (OSTI)

Fast-curing impression materials are sometimes used to cast negative-mold replications of physical defects on material surfaces. The negative-mold impressions can then be used for further measurements to record the nature of the defect. These impression materials have been designed to cure quickly, and with very low adhesion, so that they can be easily removed from the surface leaving little residual contamination. Unfortunately, some contaminant is retained by the substrate material. This investigation seeks to identify the composition and quantity of the remaining material upon removal of Microset Synthetic Rubber Replicating Compound from several material surfaces. Coe-Flex was used as a relative comparison to Microset. On fifteen different substrate materials the Microset leaves no visible trace of contaminant, however, X-ray photoelectron spectroscopy shows evidence of a thin silicone-based contaminant film of approximately 2 nm thickness.

Brumbach, Michael Todd

2011-04-01T23:59:59.000Z

219

Automatic Methods for Predicting Functionally Important Residues  

E-Print Network [OSTI]

Pazos and Alfonso Valencia* Protein Design Group National Center for Biotechnology, Cantoblanco Madrid of protein families into subfamilies in the search for those positions that could have some functional families, testing the statistical meaning of the Tree-determinant residues predicted by three different

Pazos, Florencio

220

Residual Energy Spectrum of Solar Wind Turbulence  

E-Print Network [OSTI]

It has long been known that the energy in velocity and magnetic field fluctuations in the solar wind is not in equipartition. In this paper, we present an analysis of 5 years of Wind data at 1 AU to investigate the reason for this. The residual energy (difference between energy in velocity and magnetic field fluctuations) was calculated using both the standard magnetohydrodynamic (MHD) normalization for the magnetic field and a kinetic version, which includes temperature anisotropies and drifts between particle species. It was found that with the kinetic normalization, the fluctuations are closer to equipartition, with a mean normalized residual energy of sigma_r = -0.19 and mean Alfven ratio of r_A = 0.71. The spectrum of residual energy, in the kinetic normalization, was found to be steeper than both the velocity and magnetic field spectra, consistent with some recent MHD turbulence predictions and numerical simulations, having a spectral index close to -1.9. The local properties of residual energy and cros...

Chen, C H K; Salem, C S; Maruca, B A

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Chemical Stabilization of Hanford Tank Residual Waste  

SciTech Connect (OSTI)

Three different chemical treatment methods were tested for their ability to stabilize residual waste from Hanford tank C-202 for reducing contaminant release (Tc, Cr, and U in particular). The three treatment methods tested were lime addition [Ca(OH)2], an in-situ Ceramicrete waste form based on chemically bonded phosphate ceramics, and a ferrous iron/goethite treatment. These approaches rely on formation of insoluble forms of the contaminants of concern (lime addition and ceramicrete) and chemical reduction followed by co-precipitation (ferrous iron/goethite incorporation treatment). The results have demonstrated that release of the three most significant mobile contaminants of concern from tank residual wastes can be dramatically reduced after treatment compared to contact with simulated grout porewater without treatment. For uranium, all three treatments methods reduced the leachable uranium concentrations by well over three orders of magnitude. In the case of uranium and technetium, released concentrations were well below their respective MCLs for the wastes tested. For tank C-202 residual waste, chromium release concentrations were above the MCL but were considerably reduced relative to untreated tank waste. This innovative approach has the potential to revolutionize Hanford’s tank retrieval process, by allowing larger volumes of residual waste to be left in tanks while providing an acceptably low level of risk with respect to contaminant release that is protective of the environment and human health. Such an approach could enable DOE to realize significant cost savings through streamlined retrieval and closure operations.

Cantrell, Kirk J.; Um, Wooyong; Williams, Benjamin D.; Bowden, Mark E.; Gartman, Brandy N.; Lukens, Wayne W.; Buck, Edgar C.; Mausolf, Edward J.

2014-03-01T23:59:59.000Z

222

Analysis of Oxygenated Compounds in Hydrotreated Biomass Fast Pyrolysis Oil Distillate Fractions  

SciTech Connect (OSTI)

Three hydrotreated bio-oils with different oxygen contents (8.2, 4.9, and 0.4 w/w) were distilled to produce Light, Naphtha, Jet, Diesel, and Gasoil boiling range fractions that were characterized for oxygen containing species by a variety of analytical methods. The bio-oils were originally generated from lignocellulosic biomass in an entrained-flow fast pyrolysis reactor. Analyses included elemental composition, carbon type distribution by {sup 13}C NMR, acid number, GC-MS, volatile organic acids by LC, and carbonyl compounds by DNPH derivatization and LC. Acid number titrations employed an improved titrant-electrode combination with faster response that allowed detection of multiple endpoints in many samples and for acid values attributable to carboxylic acids and to phenols to be distinguished. Results of these analyses showed that the highest oxygen content bio-oil fractions contained oxygen as carboxylic acids, carbonyls, aryl ethers, phenols, and alcohols. Carboxylic acids and carbonyl compounds detected in this sample were concentrated in the Light, Naphtha, and Jet fractions (<260 C boiling point). Carboxylic acid content of all of the high oxygen content fractions was likely too high for these materials to be considered as fuel blendstocks although potential for blending with crude oil or refinery intermediate streams may exist for the Diesel and Gasoil fractions. The 4.9 % oxygen sample contained almost exclusively phenolic compounds found to be present throughout the boiling range of this sample, but imparting measurable acidity primarily in the Light, Naphtha and Jet fractions. Additional study is required to understand what levels of the weakly acidic phenols could be tolerated in a refinery feedstock. The Diesel and Gasoil fractions from this upgraded oil had low acidity but still contained 3 to 4 wt% oxygen present as phenols that could not be specifically identified. These materials appear to have excellent potential as refinery feedstocks and some potential for blending into finished fuels. Fractions from the lowest oxygen content oil exhibited some phenolic acidity, but generally contained very low levels of oxygen functional groups. These materials would likely be suitable as refinery feedstocks and potentially as fuel blend components. PIONA analysis of the Light and Naphtha fractions shows benzene content of 0.5 and 0.4 vol%, and predicted (RON + MON)/2 of 63 and 70, respectively.

Christensen, Earl D.; Chupka, Gina; Luecke, Jon; Smurthwaite, Tricia D.; Alleman, Teresa L.; Iisa, Kristiina; Franz, James A.; Elliott, Douglas C.; McCormick, Robert L.

2011-10-06T23:59:59.000Z

223

All auto shredding: evaluation of automotive shredder residue generated by shredding only vehicles.  

SciTech Connect (OSTI)

A well developed infrastructure exists for the reuse and recycling of automotive parts and materials. At the end of a vehicle's useful life many parts are removed and sold for reuse and fluids are recovered for recycling or proper disposal. What remains is shredded, along with other metal bearing scrap such as home appliances, demolition debris and process equipment, and the metals are separated out and recycled. The remainder of the vehicle materials is call shredder residue which ends up in the landfill. As energy and natural resources becomes more treasured, increased effort has been afforded to find ways to reduce energy consumption and minimize the use of our limited resources. Many of the materials found in shredder residue could be recovered and help offset the use of energy and material consumption. For example, the energy content of the plastics and rubbers currently landfilled with the shredder residue is equivalent to 16 million barrels of oil per year. However, in the United States, the recovered materials, primarily polymers, cannot be recycled due to current regulatory barriers which preclude the re-introduction into commerce of certain materials because of residual contamination with substances of concern (SOCs) such as polychlorinated biphenyls (PCBs). The source of the PCBs is not well understood. Old transformers, capacitors, white goods and ballasts from lighting fixtures are likely contributing factors. The project was designed to evaluate whether vehicles of varying age and manufacturing origin contribute to the PCB content in shredder residue. Additionally, the project was designed to determine if there are any trends in material composition of the shredder residue from varied age and manufacturing groups. This information would aid in future material recovery facility strategy and design. The test utilized a newly installed shredder plant to shred four categories of automobiles. The categories were defined by vehicle age and the manufacturing company and location. Each category of vehicles was processed individually through the shredder plant and the resulting shredder residue was analyzed for its materials composition and presence of PCBs and leachable metals. The results show that shredder residue from all vehicle categories tested are not significant contributors of PCBs and leachable metals. It was evident that leachable cadmium levels have decreased in newer vehicles. The composition of the shredder residue from each of the four categories is similar to the others. In addition, these compositions are approximately equal to the composition of typical shredder residues, not limited to automotive materials.

Duranceau, C. M.; Spangenberger, J. S. (Energy Systems); (Vehicle Recycling Partnership, LLC); (American Chemistry Counsel, Plastics Division)

2011-09-26T23:59:59.000Z

224

Two-stage hydrotreating of a bitumen-derived middle distillate to produce diesel and jet fuels, and kinetics of aromatics hydrogenation  

SciTech Connect (OSTI)

The middle distillate from a synthetic crude oil derived from Athabasca bitumen was further hydrotreated in a downflow pilot unit over a typical NiMo catalyst at 330 to 400 C, 7 to 11 MPa and 0.63 to 1.39 h{sup {minus}1} LHSV. Feed and liquid products were characterized for aromatics, cetane index (CI) and other diesel specification items. Aromatics were determined by a supercritical fluid chromatography method, while CI was determined using the correlation developed at Syncrude Canada Ltd. Also feed and selected products were distilled into a jet fuel cut (150/260 C) by spinning band distillation for the determination of smoke point and other jet fuel specification items. A good relationship between aromatics content and CI was obtained. Kinetics of aromatics hydrogenation were investigated, employing a simple-first order reversible reaction model.

Yui, S.M. [Syncrude Canada Ltd., Edmonton, Alberta (Canada)

1994-12-31T23:59:59.000Z

225

Thin layer chromatography residue applicator sampler  

DOE Patents [OSTI]

A thin layer chromatograph residue applicator sampler. The residue applicator sampler provides for rapid analysis of samples containing high explosives, chemical warfare, and other analyses of interest under field conditions. This satisfied the need for a field-deployable, small, hand-held, all-in-one device for efficient sampling, sample dissolution, and sample application to an analytical technique. The residue applicator sampler includes a sampling sponge that is resistant to most chemicals and is fastened via a plastic handle in a hermetically sealed tube containing a known amount of solvent. Upon use, the wetted sponge is removed from the sealed tube and used as a swiping device across an environmental sample. The sponge is then replaced in the hermetically sealed tube where the sample remains contained and dissolved in the solvent. A small pipette tip is removably contained in the hermetically sealed tube. The sponge is removed and placed into the pipette tip where a squeezing-out of the dissolved sample from the sponge into the pipette tip results in a droplet captured in a vial for later instrumental analysis, or applied directly to a thin layer chromatography plate for immediate analysis.

Nunes, Peter J. (Danville, CA); Kelly, Fredrick R. (Modesto, CA); Haas, Jeffrey S. (San Ramon, CA); Andresen, Brian D. (Livermore, CA)

2007-07-24T23:59:59.000Z

226

A Practical Model for Mobile, Residual, and Entrapped NAPL in...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

A Practical Model for Mobile, Residual, and Entrapped NAPL in Water-Wet Porous Media. A Practical Model for Mobile, Residual, and Entrapped NAPL in Water-Wet Porous Media....

227

In-situ method for treating residual sodium  

SciTech Connect (OSTI)

A unique process for deactivating residual sodium in Liquid Metal Fast Breeder Reactor (LMFBR) systems which uses humidified (but not saturated) carbon dioxide at ambient temperature and pressure to convert residual sodium into solid sodium bicarbonate.

Sherman, Steven R. (Idaho Falls, ID); Henslee, S. Paul (Idaho Falls, ID)

2005-07-19T23:59:59.000Z

228

Testing regression models with residuals as data by Xia Hua.  

E-Print Network [OSTI]

Abstract In polynomial regression ... . In this thesis, I developed a residual based test, the turning point test for residuals, which tests the hypothesis that the kth order polynomial regression holds with ... while the ...

Hua, Xia, Ph. D. Massachusetts Institute of Technology

2010-01-01T23:59:59.000Z

229

NEURAL NETWORK RESIDUAL STOCHASTIC COSIMULATION FOR ENVIRONMENTAL DATA ANALYSIS  

E-Print Network [OSTI]

on radioactive soil contamination from the Chernobyl fallout. Introduction The problem of analysing environmentalNEURAL NETWORK RESIDUAL STOCHASTIC COSIMULATION FOR ENVIRONMENTAL DATA ANALYSIS V. Demyanov, M original method of stochastic simulation of environmental data -- Neural Network Residual Sequential

230

In-Situ Method for Treating Residual Sodium  

DOE Patents [OSTI]

A unique process for deactivating residual sodium in Liquid Metal Fast Breeder Reactor (LMFBR) systems which uses humidified (but not saturated) carbon dioxide at ambient temperature and pressure to convert residual sodium into solid sodium bicarbonate.

Sherman, Steven R.; Henslee, S. Paul

2005-07-19T23:59:59.000Z

231

1-D Transforms for the Motion Compensation Residual  

E-Print Network [OSTI]

Transforms used in image coding are also commonly used to compress prediction residuals in video coding. Prediction residuals have different spatial characteristics from images, and it is useful to develop transforms that ...

Kamisli, Fatih

232

Bioassays of weathered residues of several organic phosphorus insecticides  

E-Print Network [OSTI]

residues on fruit, forage crops, and animals. The effects of temperature, relative humid? ity, light, wind, and simulated rain on the residual toxicities of many of the chlorinated hydrocarbon insecticides used for the control of cotton insects were... humidity. Sunlight was found to be an important factor in reducing the residual effectiveness of dieldrin. Wind and simulated rain reduced the period of residual effectiveness of many of the compounds tested. These investigators have shown...

Hightower, Billie Gene

2013-10-04T23:59:59.000Z

233

Pyrolysis of shale oil residual fractions  

SciTech Connect (OSTI)

The freezing point of JP-5, the Navy jet fuel, has been related to the n-alkane content, specifically n-hexadecane. In general, jet fuels from shale oil have the highest n-alkanes. The formation of n-alkanes in the jet fuel distillation range can be explained if large n-alkanes are present in the crude oil source. Quantities of large n-alkanes are insufficient, however, to explain the amounts found - up to 37% n-alkanes in the jet fuel range. Other possible precursors to small straight chain molecules are substituted cyclic compounds. Attack in the side chain obviously afford a path to an n-alkane. Aromatic hydrocarbons, esters, acids, amines, and ethers also have the potential to form n-alkanes if an unbranched alkyl chain is present in the molecule. Investigations showed that the best yield of the JP-5 cut comes at different times for the various fractions, but a time in the 60 to 120 min range would appear to be the optimum time for good yield at 450/sup 0/C. The longer time would be preferred with respect to lower potential n-alkane yield. None of the fractions gave n-alkane yields approaching the 37% amount found in the Shale-I JP-5. A temperature different than the 450/sup 0/C used here might affect the conversion percentage. Further the combined saturate, aromatic, and polar fractions may interact under pyrolysis conditions to give higher potential n-alkane yields than the fractions stressed independently.

Hazlett, R.N.; Beal, E.; Vetter, T.; Sonntag, R.; Moniz, W.

1980-01-01T23:59:59.000Z

234

RESIDUAL STRESS AND YOUNG'S MODULUS MEASUREMENT OF CAPACITIVE MICROMACHINED ULTRASONIC  

E-Print Network [OSTI]

deposition technique yields residual stress of around 100 MPa and Young's modulus of around 300 GPa. Keywords's modulus, Poisson's ratio, and residual stress of the deposited thin films. In this paper, we propose a newRESIDUAL STRESS AND YOUNG'S MODULUS MEASUREMENT OF CAPACITIVE MICROMACHINED ULTRASONIC TRANSDUCER

Khuri-Yakub, Butrus T. "Pierre"

235

SUPERLAYER RESIDUAL STRESS EFFECT ON THE INDENTATION ADHESION MEASUREMENTS  

E-Print Network [OSTI]

as a function of film thickness and residual stress. These films were sputter deposited onto thermally oxidized deposition parameters were controlled to produce either a compressive residual stress of 1 GPa or a tensile in a study of compressive and tensile residual stresses created during sputter deposition of tungsten

Volinsky, Alex A.

236

Welding residual stresses in ferritic power plant steels  

E-Print Network [OSTI]

REVIEW Welding residual stresses in ferritic power plant steels J. A. Francis*1 , H. K. D. H require therefore, an accounting of residual stresses, which often are introduced during welding. To do in the estimation of welding residual stresses in austenitic stainless steels. The progress has been less convincing

Cambridge, University of

237

UNLOCKING ANCIENT DIET: USING STARCH GRANULES IN FOOD RESIDUE FROM COOKING CERAMICS TO ANALYZE PRE-COLUMBIAN ERA CADDO DIET  

E-Print Network [OSTI]

This thesis examines the nature of food residues on sherds of ancient Caddoan ceramic cooking vessels from East Texas, which was the homeland of Caddoan peoples for more than 2,000 years. Interior surfaces of some ceramic cooking vessels retain...

Skrla, Amy

2011-04-28T23:59:59.000Z

238

Distillation of Bose-Einstein Condensates in a Double-Well Potential Y. Shin, M. Saba, A. Schirotzek, T. A. Pasquini, A. E. Leanhardt, D. E. Pritchard, and W. Ketterle*  

E-Print Network [OSTI]

Distillation of Bose-Einstein Condensates in a Double-Well Potential Y. Shin, M. Saba, A-Einstein condensates of sodium atoms, prepared in an optical dipole trap, were distilled into a second empty dipole the potential barrier separating the two wells and then forming a new condensate. This process serves as a model

239

Ashot Minasyan SQ-universality and residual properties. . . -slide #1 The SQ-universality and residual properties of  

E-Print Network [OSTI]

Ashot Minasyan SQ-universality and residual properties. . . - slide #1 The SQ-universality Main Results Ashot Minasyan SQ-universality and residual properties. . . - slide #2 SQ-universality and residual properties. . . - slide #2 SQ-universality A group G is called SQ-universal if any countable group

Minasyan, Ashot

240

A characterization and evaluation of coal liquefaction process streams. The kinetics of coal liquefaction distillation resid conversion  

SciTech Connect (OSTI)

Under subcontract from CONSOL Inc., the University of Delaware studied the mechanism and kinetics of coal liquefaction resid conversion. The program at Delaware was conducted between August 15, 1994, and April 30, 1997. It consisted of two primary tasks. The first task was to develop an empirical test to measure the reactivity toward hydrocracking of coal-derived distillation resids. The second task was to formulate a computer model to represent the structure of the resids and a kinetic and mechanistic model of resid reactivity based on the structural representations. An introduction and Summary of the project authored by CONSOL and a report of the program findings authored by the University of Delaware researchers are presented here.

Klein, M.T.; Calkins, W.H.; Huang, H.; Wang, S.; Campbell, D.

1998-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

T-534: Vulnerability in the PDF distiller of the BlackBerry Attachment Service for the BlackBerry Enterprise Server  

Broader source: Energy.gov [DOE]

BlackBerry advisory describes a security issue that the BlackBerry Attachment Service component of the BlackBerry Enterprise Server is susceptible to. The issue relates to a known vulnerability in the PDF distiller component of the BlackBerry Attachment Service that affects how the BlackBerry Attachment Service processes PDF files.

242

Distillation of Bose-Einstein condensates in a double-well potential The characteristic feature of Bose-Einstein condensation is the accumulation of a  

E-Print Network [OSTI]

Distillation of Bose-Einstein condensates in a double-well potential The characteristic feature of Bose-Einstein condensation is the accumulation of a macroscopic number of particles in the lowest quantum state. Condensate fragmentation, the macroscopic occupation of two or more quantum states

243

Combination process for upgrading residual oils  

SciTech Connect (OSTI)

This patent describes a method for upgrading high boiling residual portions of crude oils comprising metal contaminants, porphyrins, asphaltenes and high molecular weight multi-ring hydrocarbon material. It comprises: charging a high boiling residual portion of crude oil admixed with diluent in contact with suspended upflowing substantially inert fluidizable solids particulate material at an elevated thermal visbreaking temperature in a riser contact zone for a time sufficient to recover therefrom a vaporous hydrocarbon product higher boiling than gasoline partially decarbonized and demetallized to a lower contaminating metals level, quenching the vaporous product of thermal visbreaking below its dew point after separation from solids, charging quenched thermally modified high boiling hydrocarbon product with a crystalline zeolite cracking catalyst under cracking conditions for a hydrocarbon residence time in a riser cracking zone; recovering a hydrocarbon conversion product; separating a combined C{sub 4} minus wet gas product stream of the visbreaking and zeolite catalyst cracking operating to recover a C{sub 3}-C{sub 4} rich fraction separately from a C{sub 2} minus dry gas product fraction, and regenerating the crystalline zeolite contcontaining catalyst.

Busch, L.E.; Walters, P.W.; Zandona, O.

1990-01-16T23:59:59.000Z

244

Stocks of Distillate Fuel Oil Greater Than 15 ppm to 500 ppm Sulfur  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S. NaturalA. Michael Schaal Director, Oil and10:InformationSteam Coal109,4334,538

245

Combustion turbine deposition observations from residual and simulated residual oil studies  

SciTech Connect (OSTI)

Burning residual oil in utility combustion turbines and the consequent deposition on blades and vanes may adversely affect reliability and operation. Corrosion and deposition data for combustion turbine materials have been obtained through dynamic testing in pressurized passages. The deposition produced by the 1900/sup 0/F (1038/sup 0/C) combustion gases from a simulated and a real residual oil on cooled Udimet 500 surfaces is described. Higher deposition rates for the doped fuel than for the real residual oil raised questions of whether true simulation with this approach can be achieved. Particles 4-8..mu.. m in diameter predominated in the gas stream, with some fraction in the 0.1-12 ..mu.. m range. Deposition rates seemed to be influenced by thermophoretic delivery of small molten particles, tentatively identified as magnesium pyro and metavanadates and free vanadium pentoxide, which may act to bond the larger solid particles arriving by inertial impaction to turbine surfaces. Estimated maintenance intervals for current utility turbines operating with washed and treated residual oil agreed well with field experience.

Whitlow, G.A.; Cohn, A.; Lee, S.Y.; Mulik, P.R.; Sherlock, T.P.; Wenglarz, R.A.

1983-01-01T23:59:59.000Z

246

Isomer residual ratio of odd-odd isotope {sup 180}Ta in supernova nucleosynthsis  

SciTech Connect (OSTI)

The nucleosynthesis of {sup 180}Ta has remained an unsolved problem and as its origin many nucleosynthesis mechanisms have been proposed. This isotope has the unique feature that the naturally occurring abundance of {sup 180}Ta is actually a meta-stable isomer (half-life of >=10{sup 15} yr), while the ground state is a 1{sup +} unstable state which beta-decays with a half-life of only 8.15 hr. We have made a new time-dependent calculation of {sup 180}Ta meta-stable isomer residual ratio after supernova neutrino-induced reactions. This residual isomer ratio is crucial for understanding the production and survival of this naturally occurring rare isotope. We have constructed a new model under temperature evolution after type II supernova explosion. We include the explicit linking between the isomer and all known excited states and found that the residual ratio is insensitive to astrophysical parameters such as neutrino energy spectrum, explosion energy, decay time constant. We find that the explicit time evolution of the synthesis of {sup 180}Ta avoids the overproduction relative to {sup 138}La for a neutrino process neutrino temperature of 4 MeV.

Hayakawa, Takehito [Japan Atomic Energy Agency, Kizugawa, Kyoto 619-0215 (Japan); Kajino, Toshitaka [National Astronomical Observatory, Osawa, Mitaka, Tokyo 181-8588 (Japan); Chiba, Satoshi [Japan Atomic Energy Agency, Tokai, Naka, Ibaraki 319-11 (Japan); Mathews, Grant [Enter for Astrophysics, Department of Physics, University of Notre Dame, Notre Dame, IN 46556 (United States)

2010-06-01T23:59:59.000Z

247

Distillation 29 Chem 355 Jasperse DISTILLATION  

E-Print Network [OSTI]

vaporize. The vapors produced are subsequently passed through a water-cooled condenser. Upon cooling liquid doesn't change, only the rate of vaporization. The energy supplied by heating is used

Jasperse, Craig P.

248

Recovery of gallium from aluminum industry residues  

SciTech Connect (OSTI)

A procedure is proposed to recover gallium from flue dust aluminum residues produced in plants by using solid-phase extraction with a commercial polyether-type polyurethane foam (PUF). Gallium can be separated from high concentrations of aluminum, iron, nickel, titanium, vanadium, copper, zinc, sulfate, fluoride, and chloride by extraction with PUF from 3 M sulfuric acid and 3 M sodium chloride concentration medium with at least a 92% efficiency. Gallium backextraction was fast and quantitative with ethanol solution. In all recovery steps commercial-grade reagents could be used, including tap water. The recovered gallium was precipitated with sodium hydroxide solution, purified by dissolution and precipitation, calcinated, and the final oxide was 98.6% pure.

Carvalho, M.S.; Neto, K.C.M.; Nobrega, A.W.; Medeiros, J.A.

2000-01-01T23:59:59.000Z

249

Method For Characterizing Residual Stress In Metals  

DOE Patents [OSTI]

A method is provided for measuring the residual stress in metals. The method includes the steps of drilling one or more holes in a metal workpiece to a preselected depth and mounting one or more acoustic sensors on the metal workpiece and connecting the sensors to an electronic detecting and recording device. A liquid metal capable of penetrating into the metal workpiece placed at the bottom of the hole or holes. A recording is made over a period of time (typically within about two hours) of the magnitude and number of noise events which occur as the liquid metal penetrates into the metal workpiece. The magnitude and number of noise events are then correlated to the internal stress in the region of the workpiece at the bottom of the hole.

Jacobson, Loren A. (Santa Fe, NM); Michel, David J. (Alexandria, VA); Wyatt, Jeffrey R. (Burke, VA)

2002-12-03T23:59:59.000Z

250

Process converts incineration slag into stabilized residue  

SciTech Connect (OSTI)

During 1973 and 1974, EMC-Services designed and built a physico-chemical treatment plant in Hombourg, in France's Alsatian region. The plant is still in operation. Since then, EMC-Services has developed substantial experience in environmental projects, becoming one of the top companies internationally with experience and practice in designing, building and operating hazardous waste treatment plants. EMC-Services operates in France in Salaise, Strasbourg, Mitry-Mory, and Saint-Vulbas, where eight incinerators treat solid, liquid, highly halogenated and nonhazardous industrial waste. The incinerators, built or updated by EMC-Services, have a total capacity of about 200,000 tons per year. In the new process, incineration of special industrial wastes produces non-volatilized solid residue or slag, which is sent for disposal, in compliance with regulations, to special disposal plants. Future European regulations will incorporate landfilling criteria requiring such slag to be stabilized.

Thauront, J.; Deneux-Mustin, S. (EMC-Services, Paris (France)); Durecu, S. (EMC-Services, Vandoeuvre-Les Nancy (France)); Fraysse, G. (EMC-Services, Saint-Vulbas (France)); Berthelin, J. (Centre de Pedologie Biologique, Vandoeuvre-Les Nancy (France))

1994-12-01T23:59:59.000Z

251

active site residue: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in human transferrin and Tyr Oksana Lockridge 2008-01-01 140 RESEARCH ARTICLE Benefits of organic residues and chemical fertilizer Biology and Medicine Websites Summary: RESEARCH...

252

active site residues: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in human transferrin and Tyr Oksana Lockridge 2008-01-01 140 RESEARCH ARTICLE Benefits of organic residues and chemical fertilizer Biology and Medicine Websites Summary: RESEARCH...

253

Table 19. U.S. Refiner Residual Fuel Oil Prices  

U.S. Energy Information Administration (EIA) Indexed Site

Prices," source for backcast estimates prior to January 1983. 19. U.S. Refiner Residual Fuel Oil Prices 36 Energy Information Administration Petroleum Marketing Annual 1996...

254

Table 19. U.S. Refiner Residual Fuel Oil Prices  

U.S. Energy Information Administration (EIA) Indexed Site

Prices," source for backcast estimates prior to January 1983. 19. U.S. Refiner Residual Fuel Oil Prices 36 Energy Information Administration Petroleum Marketing Annual 1997...

255

Residual Stresses for Structural Analysis and Fatigue Life Prediction...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Stresses for Structural Analysis and Fatigue Life Prediction in Vehicle Components: Success stories from the High Temperature Materials Laboratory (HTML) User Program Residual...

256

Wet Gasification of Ethanol Residue: A Preliminary Assessment  

SciTech Connect (OSTI)

A preliminary technoeconomic assessment has been made of several options for the application of catalytic hydrothermal gasification (wet gasification) to ethanol processing residues.

Brown, Michael D.; Elliott, Douglas C.

2008-09-22T23:59:59.000Z

257

Disappearance of fusionlike residues and the nuclear equation of state  

SciTech Connect (OSTI)

The cross sections for massive residues from {sup 40}Ca+{sup 40}Ca and {sup 40}Ar+{sup 27}Al collisions were calculated with an improved Boltzmann-Uehling-Uhlenbeck equation. The calculated residue cross sections decrease with incident energy, an effect which does not appear related to the residue excitation energy. Larger residue cross sections result from calculations with larger in-medium nucleon-nucleon cross sections or with equations of state which are less attractive at subnuclear density. This dual sensitivity may be eliminated by measurements of observables associated with the coincident light particles.

Xu, H.M.; Lynch, W.G.; Danielewicz, P.; Bertsch, G.F. (National Superconducting Cyclotron Laboratory, Michigan State University, East Lansing, MI (USA) Department of Physics, Michigan State University, East Lansing, MI (USA))

1990-08-13T23:59:59.000Z

258

acetamido trideoxyhexose residue: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

The macroscopic stress evolution is connected to a length scale of residual liquefaction displayed by microscopic mean-squared displacements. The theory describes this...

259

autophosphorylated residues required: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

though no flow is present. The macroscopic stress evolution is connected to a length scale of residual liquefaction displayed by microscopic mean-squared displacements. The...

260

abradable coating residual: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

The macroscopic stress evolution is connected to a length scale of residual liquefaction displayed by microscopic mean-squared displacements. The theory describes this...

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Water dynamics clue to key residues in protein folding  

SciTech Connect (OSTI)

A computational method independent of experimental protein structure information is proposed to recognize key residues in protein folding, from the study of hydration water dynamics. Based on all-atom molecular dynamics simulation, two key residues are recognized with distinct water dynamical behavior in a folding process of the Trp-cage protein. The identified key residues are shown to play an essential role in both 3D structure and hydrophobic-induced collapse. With observations on hydration water dynamics around key residues, a dynamical pathway of folding can be interpreted.

Gao, Meng [State Key Laboratory for Turbulence and Complex Systems, and Department of Biomedical Engineering, and Center for Theoretical Biology, and Center for Protein Science, Peking University, Beijing 100871 (China)] [State Key Laboratory for Turbulence and Complex Systems, and Department of Biomedical Engineering, and Center for Theoretical Biology, and Center for Protein Science, Peking University, Beijing 100871 (China); Zhu, Huaiqiu, E-mail: hqzhu@pku.edu.cn [State Key Laboratory for Turbulence and Complex Systems, and Department of Biomedical Engineering, and Center for Theoretical Biology, and Center for Protein Science, Peking University, Beijing 100871 (China)] [State Key Laboratory for Turbulence and Complex Systems, and Department of Biomedical Engineering, and Center for Theoretical Biology, and Center for Protein Science, Peking University, Beijing 100871 (China); Yao, Xin-Qiu [State Key Laboratory for Turbulence and Complex Systems, and Department of Biomedical Engineering, and Center for Theoretical Biology, and Center for Protein Science, Peking University, Beijing 100871 (China) [State Key Laboratory for Turbulence and Complex Systems, and Department of Biomedical Engineering, and Center for Theoretical Biology, and Center for Protein Science, Peking University, Beijing 100871 (China); Department of Biophysics, Kyoto University, Sakyo Kyoto 606-8502 (Japan); She, Zhen-Su, E-mail: she@pku.edu.cn [State Key Laboratory for Turbulence and Complex Systems, and Department of Biomedical Engineering, and Center for Theoretical Biology, and Center for Protein Science, Peking University, Beijing 100871 (China)] [State Key Laboratory for Turbulence and Complex Systems, and Department of Biomedical Engineering, and Center for Theoretical Biology, and Center for Protein Science, Peking University, Beijing 100871 (China)

2010-01-29T23:59:59.000Z

262

Single-Step Syngas-to-Distillates (S2D) Synthesis via Methanol and Dimethyl Ether Intermediates: Final Report  

SciTech Connect (OSTI)

The objective of the work was to enhance price-competitive, synthesis gas (syngas)-based production of transportation fuels that are directly compatible with the existing vehicle fleet (i.e., vehicles fueled by gasoline, diesel, jet fuel, etc.). To accomplish this, modifications to the traditional methanol-to-gasoline (MTG) process were investigated. In this study, we investigated direct conversion of syngas to distillates using methanol and dimethyl ether intermediates. For this application, a Pd/ZnO/Al2O3 (PdZnAl) catalyst previously developed for methanol steam reforming was evaluated. The PdZnAl catalyst was shown to be far superior to a conventional copper-based methanol catalyst when operated at relatively high temperatures (i.e., >300°C), which is necessary for MTG-type applications. Catalytic performance was evaluated through parametric studies. Process conditions such as temperature, pressure, gas-hour-space velocity, and syngas feed ratio (i.e., hydrogen:carbon monoxide) were investigated. PdZnAl catalyst formulation also was optimized to maximize conversion and selectivity to methanol and dimethyl ether while suppressing methane formation. Thus, a PdZn/Al2O3 catalyst optimized for methanol and dimethyl ether formation was developed through combined catalytic material and process parameter exploration. However, even after compositional optimization, a significant amount of undesirable carbon dioxide was produced (formed via the water-gas-shift reaction), and some degree of methane formation could not be completely avoided. Pd/ZnO/Al2O3 used in combination with ZSM-5 was investigated for direct syngas-to-distillates conversion. High conversion was achieved as thermodynamic constraints are alleviated when methanol and dimethyl are intermediates for hydrocarbon formation. When methanol and/or dimethyl ether are products formed separately, equilibrium restrictions occur. Thermodynamic relaxation also enables the use of lower operating pressures than what would be allowed for methanol synthesis alone. Aromatic-rich hydrocarbon liquid (C5+), containing a significant amount of methylated benzenes, was produced under these conditions. However, selectivity control to liquid hydrocarbons was difficult to achieve. Carbon dioxide and methane formation was problematic. Furthermore, saturation of the olefinic intermediates formed in the zeolite, and necessary for gasoline production, occurred over PdZnAl. Thus, yield to desirable hydrocarbon liquid product was limited. Evaluation of other oxygenate-producing catalysts could possibly lead to future advances. Potential exists with discovery of other types of catalysts that suppress carbon dioxide and light hydrocarbon formation. Comparative techno-economics for a single-step syngas-to-distillates process and a more conventional MTG-type process were investigated. Results suggest operating and capital cost savings could only modestly be achieved, given future improvements to catalyst performance. Sensitivity analysis indicated that increased single-pass yield to hydrocarbon liquid is a primary need for this process to achieve cost competiveness.

Dagle, Robert A.; Lebarbier, Vanessa MC; Lizarazo Adarme, Jair A.; King, David L.; Zhu, Yunhua; Gray, Michel J.; Jones, Susanne B.; Biddy, Mary J.; Hallen, Richard T.; Wang, Yong; White, James F.; Holladay, Johnathan E.; Palo, Daniel R.

2013-11-26T23:59:59.000Z

263

Composition and structure of resins in lube distillates from West Siberian crudes  

SciTech Connect (OSTI)

As a result of the lower contents of lube components in the crudes being processed today, along with a steady increase of demand for high-quality oils and solid hydrocarbons, as well as the trend toward processing crudes with unregulated composition, it has become necessary to develop new technology for the manufacture of lube stocks, along with the use of additives for various purposes. The effectiveness of additives is determined by their properties and also by the chemical composition of the raw material in each stage of oil production. Resins are important components of raw lube stocks. These resins are complex in composition, and vary in the nature and number of heteroatoms in the molecule and in the structure of the hydrocarbon part of the molecule. The hydrocarbon radicals may include aromatic and naphthenic rings, as well as chains with various configurations. Depending on the structural features of the resin molecules, they may vary in their effects on processes of selective solvent treating, dewaxing, and deoiling with the use of additives. The authors have investigated the resins present in the intermediate and final products of lube oil production.

Kazakova, L.P.; Gundyrev, A.A.; Litvin, N.I.; Shubina, E.S.; Mukhin, M.L.

1994-09-01T23:59:59.000Z

264

NATURAL GAS MARKET ASSESSMENT  

E-Print Network [OSTI]

CALIFORNIA ENERGY COMMISSION NATURAL GAS MARKET ASSESSMENT PRELIMINARY RESULTS In Support.................................................................................... 6 Chapter 2: Natural Gas Demand.................................................................................................. 10 Chapter 3: Natural Gas Supply

265

Rapid Protein Structure Detection and Assignment using Residual Dipolar Couplings  

E-Print Network [OSTI]

Rapid Protein Structure Detection and Assignment using Residual Dipolar Couplings Michael A substructures by exploiting the orientational constraint of residual dipolar coupling (RDC). PEPMORPH reverses: We have tested PEPMORPH on a variety of real proteins deposited in the Protein Data Base (PDB), using

266

Computing Symmetrized Weight Enumerators for Lifted Quadratic Residue Codes  

E-Print Network [OSTI]

Computing Symmetrized Weight Enumerators for Lifted Quadratic Residue Codes I. M. Duursma Dept for the computation of structural parameters for ring-linear codes. This article therefore presents a method to eÃ?ciently compute weight enumerators of linear codes over primary integer residue rings. For the lifted QR-codes

Duursma, Iwan M.

267

Minimization of welding residual stress and distortion in large structures  

E-Print Network [OSTI]

1 Minimization of welding residual stress and distortion in large structures P. Michaleris at Champaign Urbana, Urbana, IL Abstract Welding distortion in large structures is usually caused by buckling due to the residual stress. In cases where the design is fixed and minimum weld size requirements

Michaleris, Panagiotis

268

Modeling Sustainable Agricultural Residue Removal at the Subfield Scale  

SciTech Connect (OSTI)

This study developed a computational strategy that utilizes data inputs from multiple spatial scales to investigate how variability within individual fields can impact sustainable residue removal for bioenergy production. Sustainable use of agricultural residues for bioenergy production requires consideration of the important role that residues play in limiting soil erosion and maintaining soil C, health, and productivity. Increased availability of subfield-scale data sets such as grain yield data, high-fidelity digital elevation models, and soil characteristic data provides an opportunity to investigate the impacts of subfield-scale variability on sustainable agricultural residue removal. Using three representative fields in Iowa, this study contrasted the results of current NRCS conservation management planning analysis with subfield-scale analysis for rake-and-bale removal of agricultural residue. The results of the comparison show that the field-average assumptions used in NRCS conservation management planning may lead to unsustainable residue removal decisions for significant portions of some fields. This highlights the need for additional research on subfield-scale sustainable agricultural residue removal including the development of real-time variable removal technologies for agricultural residue.

Muth, D.J.; McCorkle, D.S.; Koch, J.B.; Bryden, K.M.

2012-05-02T23:59:59.000Z

269

Residual Energy-Aware Cooperative Transmission (REACT) in Wireless Networks  

E-Print Network [OSTI]

Residual Energy-Aware Cooperative Transmission (REACT) in Wireless Networks Erwu Liu, Qinqing Zhang the lifetime of the network and we call the selection method a residual energy-aware cooperative transmission- works, where energy efficiency is a critical design consideration. We assume that multiple relay nodes

Leung, Kin K.

270

RESIDUAL STRESS EFFECTS IN FRACTURE OF COMPOSITES AND ADHESIVES  

E-Print Network [OSTI]

RESIDUAL STRESS EFFECTS IN FRACTURE OF COMPOSITES AND ADHESIVES JOHN A. NAIRN ABSTRACT Because composites and adhesive joints are made from different phases with different thermal expansion coefficients, they inevitably develop residual thermal stresses. When designing composites or adhesive joints, it is important

Nairn, John A.

271

Conversion of direct process high-boiling residue to monosilanes  

DOE Patents [OSTI]

A process for the production of monosilanes from the high-boiling residue resulting from the reaction of hydrogen chloride with silicon metalloid in a process typically referred to as the "direct process." The process comprises contacting a high-boiling residue resulting from the reaction of hydrogen chloride and silicon metalloid, with hydrogen gas in the presence of a catalytic amount of aluminum trichloride effective in promoting conversion of the high-boiling residue to monosilanes. The present process results in conversion of the high-boiling residue to monosilanes. At least a portion of the aluminum trichloride catalyst required for conduct of the process may be formed in situ during conduct of the direct process and isolation of the high-boiling residue.

Brinson, Jonathan Ashley (Vale of Glamorgan, GB); Crum, Bruce Robert (Madison, IN); Jarvis, Jr., Robert Frank (Midland, MI)

2000-01-01T23:59:59.000Z

272

Understanding the Nature and Reactivity of Residual Lignin for Improved Pulping and Bleaching Efficiency  

SciTech Connect (OSTI)

One of the most formidable challenges in kraft pulping to produce bleached chemical pulps is how to effectively remove the last 5-10% of lignin while maintaining the fiber quality. To avoid a severe fiber degradation, kraft pulping is usually terminated in the 25-30 kappa number range and then followed by an elementally chlorine free (ECF) or a totally chlorine free (TCF) bleaching sequence to reduce the environmental impacts.

Yuan-Zong Lai

2001-11-30T23:59:59.000Z

273

Nature Macmillan Publishers Ltd 1997 letters to nature  

E-Print Network [OSTI]

To test these predictions we used drops of distilled water which contained charge-stabilized surfactant-free polystyrene micro- spheres (Interfacial Dynamics, Portland, OR) at a starting volume fraction of 10 values10 for the water diffusivity in air and for the saturated vapour concentration. In a separate

Asher, Sanford A.

274

Separation of thorium (IV) from lanthanide concentrate (LC) and water leach purification (WLP) residue  

SciTech Connect (OSTI)

Thorium (IV) content in industrial residue produced from rare earth elements production industry is one of the challenges to Malaysian environment. Separation of thorium from the lanthanide concentrate (LC) and Water Leach Purification (WLP) residue from rare earth elements production plant is described. Both materials have been tested by sulphuric acid and alkaline digestions. Th concentrations in LC and WLP were determined to be 1289.7 ± 129 and 1952.9±17.6 ppm respectively. The results of separation show that the recovery of Th separation from rare earth in LC after concentrated sulphuric acid dissolution and reduction of acidity to precipitate Th was found 1.76-1.20% whereas Th recovery from WLP was less than 4% after concentrated acids and alkali digestion processes. Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) was used to determine Th concentrations in aqueous phase during separation stages. This study indicated that thorium maybe exists in refractory and insoluble form which is difficult to separate by these processes and stays in WLP residue as naturally occurring radioactive material (NORM)

AL-Areqi, Wadeeah M.; Majid, Amran Ab.; Sarmani, Sukiman [Nuclear Science Programme, School of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor (Malaysia)

2014-09-03T23:59:59.000Z

275

Total Adjusted Sales of Residual Fuel Oil  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S. NaturalA. Michael SchaalNovember 26, 2008 (Next1, 20126,6,4,7,Top 100EndEnd

276

Total Sales of Residual Fuel Oil  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S. NaturalA. Michael SchaalNovember 26, 2008

277

DDT RESIDUES IN SEAWATER AND PARTICULATE MATTER IN THE CALIFORNIA CURRENT SYSTEM  

E-Print Network [OSTI]

DDT RESIDUES IN SEAWATER AND PARTICULATE MATTER IN THE CALIFORNIA CURRENT SYSTEM JAMES L. COX in the California current system were analyzed for DDT residues. DDT residue concentrations in whole seawater are discussed in relation to mechanisms of land-sea DDT residue transfer. DDT residue concentrations

278

A manual for implementing residual radioactive material guidelines  

SciTech Connect (OSTI)

This manual presents information for implementing US Department of Energy (DOE) guidelines for residual radioactive material at sites identified by the Formerly Utilized Sites Remedial Action Program (FUSRAP) and the Surplus Facilities Management Program (SFMP). It describes the analysis and models used to derive site-specific guidelines for allowable residual concentrations of radionuclides in soil and the design and use of the RESRAD computer code for calculating guideline values. It also describes procedures for implementing DOE policy for reducing residual radioactivity to levels that are as low as reasonably achievable. 36 refs., 16 figs, 22 tabs.

Gilbert, T.L.; Yu, C.; Yuan, Y.C.; Zielen, A.J.; Jusko, M.J.; Wallo, A. III

1989-06-01T23:59:59.000Z

279

Asphalt landscape after all : residual suburban surface as public infrastructure  

E-Print Network [OSTI]

The thesis proposes a hybridized commercial retail strip inserted into a residual suburban condition as a manner of investigating the latent potential of suburban logic, both its constituent elements and its formal rules ...

O'Connor, Joseph Michael, M. Arch. Massachusetts Institute of Technology

2011-01-01T23:59:59.000Z

280

Residual stress in electrodeposited nanocrystalline nickel-tungsten coatings  

E-Print Network [OSTI]

Characterizing the residual stress of thick nanocrystalline electrodeposits poses several unique challenges due to their fine grain structure, thickness distribution, and matte surface. We use a three-dimensional ...

Ziebell, Tiffany D.

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

FIXED PRICE RESIDUAL FUNDS POLICY Policy dated March 29, 1999  

E-Print Network [OSTI]

FIXED PRICE RESIDUAL FUNDS POLICY Policy dated March 29, 1999 After completion of all deliverables required under a fixed-price award, after costs in fulfilling the requirements of the award have been

Weston, Ken

282

Minimizing High Spatial Frequency Residual in Active Space Telescope Mirrors  

E-Print Network [OSTI]

. Miller June 2008 SSL # 4-08 #12;#12;Minimizing High Spatial Frequency Residual in Active Space Telescope Mirrors Thomas Gray, David W. Miller June 2008 SSL # 4-08 This work is based on the unaltered text

283

An urban infill : a residual site in Boston  

E-Print Network [OSTI]

This thesis is concerned with the treatment of residual sites in the context of the urban environment and in particular with the wounds inflicted by the passage of the Massachusetts Turnpike through the city of Boston. The ...

Savvides, Andreas L. (Andreas Loucas)

1996-01-01T23:59:59.000Z

284

RetroFILL : residual spaces as urban infill  

E-Print Network [OSTI]

In any city there are small slivers and chunks of awkward spaces - in between buildings, occupying edge conditions, not large enough to warrant many forms of traditional use - which can be termed residual. These areas of ...

Kobel, Marika

2010-01-01T23:59:59.000Z

285

Residual dust charges in an afterglow plasma , M. Mikikian  

E-Print Network [OSTI]

plasma was performed in a rf discharge. An upward thermophoretic force was used to balance]. For the study concerning residual charges, the top electrode was cooled. An upward thermophoretic force

Paris-Sud XI, Université de

286

RELATIVE RESIDUAL BOUNDS FOR INDEFINITE SINGULAR HERMITIAN MATRICES  

E-Print Network [OSTI]

residual bounds, indefinite Hermitian matrix, eigen- values, perturbation theory, relative perturbations. These theorems are proper generalization of results on a semi-definite Hermitian matrix SIAM Journal on Matrix

Truhar, Ninoslav

287

Palatability of post-extraction algal residue as a protein supplement for cattle.  

SciTech Connect (OSTI)

Market value of post-extraction algal residue (PEAR) is driven by its ability to compete with commonly fed protein sources; for example cottonseed meal (CSM) and dried distillers’ grains (DDG). An initial step in evaluating PEAR (20% CP, 59% OM) is to determine palatability when fed as a protein supplement. Accordingly, we evaluated the palatability of PEAR-containing supplements in cattle consuming a basal diet of Bermudagrass (13% CP, 76% NDF). Twelve steers were used in a 12 × 12 Latin square experiment consisting of 12 4-d periods. Each period included 3-d where steers were fed a test supplement and a 1-d washout where steers were fed DDG. Supplements were formulated with different carrier ingredients (DDG, CSM, or liquid supplement, LS) and different levels of PEAR inclusion (0, 20, 40, and 60% for DDG and CSM and 0, 33, 66, and 100% for LS). Intake and time required for consumption were recorded daily. A significant (P < 0.05) treatment × day interaction for g consumed per min (GPM) was observed. This interaction resulted from changing rates of consumption as cattle adapted to supplements. Supplements containing DDG had the greatest rates of consumption (177 – 187 GPM), followed by CSM supplements (148 – 166 GPM). Blends including PEAR and LS had slower rates of consumption (58 – 93 GPM). Supplement formulation significantly (P < 0.05) affected the amount of supplement consumed and time required for complete consumption. Supplements which contained DDG or CSM were consumed in less than 11 min; complete consumption was observed 92 – 100% of the time. Treatments containing LS required more time for complete consumption (21 – 33 min) and were finished 77 – 96% of the time. Our results suggest PEAR can be blended (up to 60%) with existing ingredients utilized in beef rations to create suitable protein supplements. However, PEAR is not palatable when offered alone (complete consumption of 100% PEAR occurred 77.5% of the time and required 31.5 min) or incorporated into LS. Additional research is necessary to determine the impact of PEAR on nutrient utilization in cattle.

Drewery, M. L. [Texas A& M University; Sawyer, J. E. [Texas A& M University; Wickersham, T. A. [Texas A& M University

2012-12-01T23:59:59.000Z

288

GEOCHEMICAL TESTING AND MODEL DEVELOPMENT - RESIDUAL TANK WASTE TEST PLAN  

SciTech Connect (OSTI)

This Test Plan describes the testing and chemical analyses release rate studies on tank residual samples collected following the retrieval of waste from the tank. This work will provide the data required to develop a contaminant release model for the tank residuals from both sludge and salt cake single-shell tanks. The data are intended for use in the long-term performance assessment and conceptual model development.

CANTRELL KJ; CONNELLY MP

2010-03-09T23:59:59.000Z

289

Characterization of flue gas residues from municipal solid waste combustors  

SciTech Connect (OSTI)

Solid residues recovered from treatment of flue gas resulting from the combustion of municipal solid waste (MSW) are of particular concern because of ever-increasing worldwide production rates and their concentrations of potentially hazardous transition elements and heavy metals. Three main residue types have been studied in this study: electrostatic precipitator ashes, wet filter cakes, and semidry scrubber residues. Using a large number of residues from two French MSW combustion (MSWC) facilities, the aim of this work is to determine their chemistry and mineralogy in order to shed light on their potential toxicity. The authors find that pollutant concentrations are dependent not only on the composition of MSW but also on the size of particles and flue gas treatment process. Using a procedure based on leaching, grain-size, density, and magnetic separations, the authors present a detailed description of the mineralogy of MSWC solid residues. These residues consist of a very heterogeneous assemblage of glasses, metals, and other crystals in which polluting elements are distributed. The results of this characterization will therefore help to contribute to the development of adequate waste management strategies.

Forestier, L.L. [CRPG-CNRS, Vandoeuvre-les-Nancy (France)] [CRPG-CNRS, Vandoeuvre-les-Nancy (France); [ENSG, Vandoeuvre-les-Nancy (France); Libourel, G. [CRPG-CNRS, Vandoeuvre-les-Nancy (France)] [CRPG-CNRS, Vandoeuvre-les-Nancy (France); [Univ. H. Poincare, Vandoeuvre-les-Nancy (France)

1998-08-01T23:59:59.000Z

290

Residual stresses and stress corrosion cracking in pipe fittings  

SciTech Connect (OSTI)

Residual stresses can play a key role in the SCC performance of susceptible materials in PWR primary water applications. Residual stresses are stresses stored within the metal that develop during deformation and persist in the absence of external forces or temperature gradients. Sources of residual stresses in pipe fittings include fabrication processes, installation and welding. There are a number of methods to characterize the magnitude and orientation of residual stresses. These include numerical analysis, chemical cracking tests, and measurement (e.g., X-ray diffraction, neutron diffraction, strain gage/hole drilling, strain gage/trepanning, strain gage/section and layer removal, and acoustics). This paper presents 400 C steam SCC test results demonstrating that residual stresses in as-fabricated Alloy 600 pipe fittings are sufficient to induce SCC. Residual stresses present in as-fabricated pipe fittings are characterized by chemical cracking tests (stainless steel fittings tested in boiling magnesium chloride solution) and by the sectioning and layer removal (SLR) technique.

Parrington, R.J.; Scott, J.J.; Torres, F.

1994-06-01T23:59:59.000Z

291

Opportunities and Challenges for Nondestructive Residual Stress Assessment  

SciTech Connect (OSTI)

For a long time, nondestructive residual stress assessment has been one of the greatest opportunities as well as one of the greatest challenges for the NDE community, and probably it will remain so in the foreseeable future. The most critical issue associated with nondestructive residual stress assessment seems to be that of selectivity. Numerous NDE methods have been found to be sufficiently sensitive to the presence of residual stress, but unfortunately also rather sensitive to other spurious variations that usually accompany residual stresses, such as anisotropic texture, microstructural inhomogeneity, plastic deformation, etc., which could interfere with, or even overshadow, the elastic strain caused by the sought residual stress. The only sufficiently selective NDE method that is more or less immune from these spurious effects is X-ray diffraction measurement, which however does not have the required penetration depth in most applications unless high-energy neutron radiation is used. It is timely for the community to sit back and ask where we are in this important area. This paper presents an overview of the various indirect techniques that have been used to measure residual stress in the past. It is shown that traditional techniques have a number of limitations, which have spurred several recent research programs. Some of the new techniques that are presently being examined in the NDE community are reviewed and the current status of these research efforts is assessed.

Nagy, P. B. [Department of Aerospace Engineering and Engineering Mechanics, University of Cincinnati, Cincinnati, Ohio 45221-0070 (United States)

2006-03-06T23:59:59.000Z

292

E-Print Network 3.0 - assess residue contributions Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Waste Incinerators in England and Summary: . To assess the risks to health from ash and air pollution control residues, the Agency assessed the risks... Solid Residues from...

293

E-Print Network 3.0 - acceptable residual magnetic Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

residual limb. A small Neodymium-Iron-Boron magnet... of a small permanent magnet into the distal residual ... Source: Peshkin, Michael A.- Department of Mechanical...

294

INNOVATION EDUCATION EXCELLENCE DISTILLATIONS  

E-Print Network [OSTI]

. Our Department is a powerhouse in the area of chem- istry applied to medicine. Andrei Yudin and his

Chan, Hue Sun

295

(distillation) (Le Chatelier  

E-Print Network [OSTI]

acetate(methyl-, ethyl-, butyl-) , methanol isobutene MTBE , ethanol isobutene ETBE , methanol 2-methyl-1% MTBE 3 DMC . 2% 1990 MTBE 1999 3 2002 MTBE . [ 1-1 ] Phosgene process polycarbonate(PC) 50/ . DMC DMC MTBE / . ( : Amoco, "Review of DMC Manufacture and its

Hong, Deog Ki

296

Regulation of natural monopolies  

E-Print Network [OSTI]

This chapter provides a comprehensive overview of the theoretical and empirical literature on the regulation of natural monopolies. It covers alternative definitions of natural monopoly, regulatory goals, alternative ...

Joskow, Paul L.

2005-01-01T23:59:59.000Z

297

Historical Natural Gas Annual  

U.S. Energy Information Administration (EIA) Indexed Site

8 The Historical Natural Gas Annual contains historical information on supply and disposition of natural gas at the national, regional, and State level as well as prices at...

298

Historical Natural Gas Annual  

U.S. Energy Information Administration (EIA) Indexed Site

6 The Historical Natural Gas Annual contains historical information on supply and disposition of natural gas at the national, regional, and State level as well as prices at...

299

Historical Natural Gas Annual  

U.S. Energy Information Administration (EIA) Indexed Site

7 The Historical Natural Gas Annual contains historical information on supply and disposition of natural gas at the national, regional, and State level as well as prices at...

300

Natural Gas Rules (Louisiana)  

Broader source: Energy.gov [DOE]

The Louisiana Department of Natural Resources administers the rules that govern natural gas exploration and extraction in the state. DNR works with the Louisiana Department of Environmental...

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Natural Resources Districts (Nebraska)  

Broader source: Energy.gov [DOE]

This statute establishes Natural Resources District, encompassing all of the area of the state, to conserve, protect, develop, and manage Nebraska's natural resources. These districts replace and...

302

A Characterization and Evaluation of Coal Liquefaction Process Streams. Results of Inspection Tests on Nine Coal-Derived Distillation Cuts in the Jet Fuel Boiling Range  

SciTech Connect (OSTI)

This report describes the assessment of the physical and chemical properties of the jet fuel (180-300 C) distillation fraction of nine direct coal liquefaction products and compares those properties to the corresponding specifications for aviation turbine fuels. These crude coal liquids were compared with finished fuel specifications specifically to learn what the refining requirements for these crudes will be to make them into finished fuels. The properties of the jet fuel fractions were shown in this work to require extensive hydrotreating to meet Jet A-1 specifications. However, these materials have a number of desirable qualities as feedstocks for the production of high energy-density jet fuels.

S. D. Brandes; R. A. Winschel

1999-12-30T23:59:59.000Z

303

Dissolution and compaction of albite sand in distilled water and pH-buffered carboxylic acid solutions: experiments at 100 degrees and 160 degrees C  

E-Print Network [OSTI]

. The confining fluid was either distilled water or a mixture of 3 parts Kerosene and 1 part SAE-30 non-detergent motor oil; confining pressure was controlled by an air- operated Sprague? pump. Inside the pressure vessel, the reaction cell (10 cm x 4. 4 cm O. D... sand. Fluid flows in and out of the reaction cell through Hastelloy C-276? lines. Slow flow rates (0. 08 ml/hr) and pore fluid pressures were controlled by an Isco? micro-processor syringe pump and a manually operated HiP? synnge pump. Rapid flow...

Carpenter, Thomas Doyle

1995-01-01T23:59:59.000Z

304

Start up results from a specialized flue gas cleaning facility in a power station using refinery residues  

SciTech Connect (OSTI)

In eastern Germany STEAG--the biggest German IPP--has erected a power plant consisting of three combustion lines burning oil distillation residues from the new Mider refinery to provide the refinery with power, steam, water and compressed air. Each of the three flue gas cleaning lines consists of a high dust SCR-system, quench, wet electrostatic precipitator, scrubber, steam reheater and ID-fan. Common systems are the storage and handling of the absorbent, the gypsum dewatering and the waste water treatment. The installed high dust SCR system attains the expected NO{sub x}-reduction efficiency and an excellent NO{sub x} outlet distribution and low ammonia slip. After commissioning problems occurred with the wet ESP in all three lines due to improper function of the upstream quenches. Modifications of the quench system have been made which assure a temperature of the flue gas after quench near saturation temperature and correct functioning of the quench and wet ESP. To reduce pressure loss of the absorber concurrent spray nozzles were installed. Strong vibrations of the absorber tower, the connected pipes and the steel structure along with an insufficient SO{sub x} removal efficiency at high inlet concentration were observed. After changing the concurrent operation of the spray nozzles to counter current operation the vibrations of the absorber tower became smaller and the removal efficiency achieved the guaranteed value. Problems arose in the waste water treatment plant caused by the high solid concentration of up to 1,000 g/l in the thickener. By diluting the settled sludge with overflow water from the thickener the problems in the waste water treatment plant could be minimized to an acceptable degree. Despite these problems the flue gas cleaning system is in continuous operation and the emission values of flue gas and waste water meet the required standards.

Beiers, H.G.; Gilgen, R.; Weiler, H.

1998-07-01T23:59:59.000Z

305

letters to nature 164 NATURE |VOL 404 |9 MARCH 2000 |www.nature.com  

E-Print Network [OSTI]

of the residual cap area. The moats (Fig. 2c and d) also require some sequence of renewed deposition of residual summer CO2 frost; it is a geological feature indicative of depositional and ablational events, elucidation of the time scale represented by the residual deposits rests on detection of the net atmospheric

Braunstein, Samuel L.

306

Pennsylvania's Natural Gas Future  

E-Print Network [OSTI]

1 Pennsylvania's Natural Gas Future Penn State Natural Gas Utilization Workshop Bradley Hall sales to commercial and industrial customers ­ Natural gas, power, oil · Power generation ­ FossilMMBtuEquivalent Wellhead Gas Price, $/MMBtu Monthly US Spot Oil Price, $/MMBtu* U.S. Crude Oil vs. Natural Gas Prices, 2005

Lee, Dongwon

307

Research Highlights Nature Nanotechnology  

E-Print Network [OSTI]

© 2009 APS Research Highlights Nature Nanotechnology Published online: 17 July 2009 | doi:10 perfect fluid. Phys. Rev. Lett. 103, 025301 (2009). | Article |1. Nature Nanotechnology ISSN 1748 : Nature Nanotechnology http://www.nature.com/nnano/reshigh/2009/0709/full/nnano.2009.222.html 1 of 1 18

Müller, Markus

308

Natural gas monthly  

SciTech Connect (OSTI)

The Natural Gas Monthly highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the Natural Gas Monthly features articles designed to assist readers in using and interpreting natural gas information.

NONE

1998-01-01T23:59:59.000Z

309

DDT residues in human milk samples from Delhi, India  

SciTech Connect (OSTI)

The widespread use of DDT in India has resulted in increased levels of the insecticide in the ecosystem and, therefore, the potential possible health hazards has been voiced. DDT-residues excreted in milk have been reported from different parts of the world; however, very few reports did appear from India. In fact, there is no report on DDT-content in human milk from Delhi area where higher levels of DDT and BHC in human adipose tissues and blood have already been reported. Higher bioaccumulation of DDT might reflect the higher excretion of residues in milk. The authors have, therefore, attempted a systematic study to monitor DDT-residues in human milk samples collected from various hospitals of Delhi (India).

Zaidi, S.S.A.; Bhatnagar, V.K.; Banerjee, B.D.; Balakrishnan, G.; Shah, M.P.

1989-03-01T23:59:59.000Z

310

Prediction of middle-distillate fuel properties using liquid chromatography-proton nuclear magnetic resonance spectroscopy data. Final report, 1987-1988  

SciTech Connect (OSTI)

This research was initiated to support the Army's capability to identify the components of fuels that contribute to low-temperature performance of fuels. It was discovered that various physical properties of middle-distillate fuels can be predicted. The LC-{sup 1}HNMR technique was developed to predict physical properties based on chemical structures present in the fuels. The prediction of properties is approached from a 'group property' point of view. In the group property approach, the structure of the molecule is examined for structural features that dictate the physical properties of the compounds. In other words, the physical properties of a molecule or compound are determined by the number of types of chemical groups, i.e., methyl, methylene, methine, etc., present. These LC-{sup 1}H NMR predicted property measurements were compared to measurements obtained by the ASTM fuel tests. Most measurements were found to be within experimental error. The research has demonstrated that the LC-{sup 1}H NMR approach for measuring various middle-distillate fuel properties can be used as an alternative to the ASTM methods of fuel property measurement.

Swann, M.

1989-06-01T23:59:59.000Z

311

Single-Step Syngas-to-Distillates (S2D) Process Based on Biomass-Derived Syngas - A Techno-Economic Analysis  

SciTech Connect (OSTI)

This study compared biomass gasification based syngas-to-distillate (S2D) systems using techno-economic analysis (TEA). Three cases, state of technology (SOT), goal, and conventional, were compared in terms of performance and cost. The SOT case represented the best available experimental results for a process starting with syngas using a single-step dual-catalyst reactor for distillate generation. The conventional case mirrored a conventional two-step S2D process consisting of separate syngas-to-methanol and methanol-to-gasoline (MTG) processes. The goal case assumed the same performance as the conventional, but with a single-step S2D technology. TEA results revealed that the SOT was more expensive than the conventional and goal cases. The SOT case suffers from low one-pass yield and high selectivity to light hydrocarbons, both of which drive up production cost. Sensitivity analysis indicated that light hydrocarbon yield and single pass conversion efficiency were the key factors driving the high cost for the SOT case.

Zhu, Y.; Jones, S. B.; Biddy, M. J.; Dagle, R. A.; Palo, D. R.

2012-08-01T23:59:59.000Z

312

Wave induced residual pore-water pressures in sandbeds  

E-Print Network [OSTI]

Subject: Ocean Engineering WAVE INDUCED RESIDUAL PORE-WATER PRESSURES IN SANDBEDS A Thesis by Jack W. Deyries Approved as to style and content by: J. B. Her bich (Chairman of Committee) Y. K. Lou (Member) W. A. Dunlap (Member) R. O. Reid (Member...-Water Pressure . . . . . 43 Development of Residual Pore-Mater Pressure 46 14 15 16 17 18 19 20 Wave Height Recording Pore-Water Pressure Recording Permeability of Sand Permeability of Glass Beads Wave Form (least steep) Wave Form (middle steepness...

DeVries, Jack Walter

1986-01-01T23:59:59.000Z

313

A Residual Mass Ballistic Testing Method to Compare Armor Materials or Components (Residual Mass Ballistic Testing Method)  

SciTech Connect (OSTI)

A statistics based ballistic test method is presented for use when comparing multiple groups of test articles of unknown relative ballistic perforation resistance. The method is intended to be more efficient than many traditional methods for research and development testing. To establish the validity of the method, it is employed in this study to compare test groups of known relative ballistic performance. Multiple groups of test articles were perforated using consistent projectiles and impact conditions. Test groups were made of rolled homogeneous armor (RHA) plates and differed in thickness. After perforation, each residual projectile was captured behind the target and its mass was measured. The residual masses measured for each test group were analyzed to provide ballistic performance rankings with associated confidence levels. When compared to traditional V50 methods, the residual mass (RM) method was found to require fewer test events and be more tolerant of variations in impact conditions.

Benjamin Langhorst; Thomas M Lillo; Henry S Chu

2014-05-01T23:59:59.000Z

314

Computer aided analysis for residual stress measurement using ultrasonic techniques  

E-Print Network [OSTI]

to detect travel-times with a precision of 0. l nanoseconds and an accuracy of less than 2.5 nanoseconds. A residual stress reference standard developed for previous research was used as the sample to measure travel-times. The sample was designed...

Kypa, Jagan Mohan

1999-01-01T23:59:59.000Z

315

Removal of residual particulate matter from filter media  

DOE Patents [OSTI]

A method for removing residual filter cakes that remain adhered to a filter after typical particulate removal methodologies have been employed, such as pulse-jet filter element cleaning, for all cleanable filters used for air pollution control, dust control, or powder control.

Almlie, Jay C; Miller, Stanley J

2014-11-11T23:59:59.000Z

316

Modeling, Optimization and Economic Evaluation of Residual Biomass Gasification  

E-Print Network [OSTI]

. .............................................................................. 7 Table 2. Components Used in Simulation. ...................................................................... 20 Table 3. Composition of Biomass Feedstock to Biorefinery. ......................................... 43 Table 4. Operating... for optimizing gasification plant design from an economic perspective. Specifically, the problem addressed in this work is stated as follows: Given are: ? A set of biomass feedstocks {i|i = 1,2,?,I } which includes fresh as well as residue biomass ? A set...

Georgeson, Adam

2012-02-14T23:59:59.000Z

317

PROPERTIES OF RESIDUALS FOR SPATIAL POINT PROCESSES A. BADDELEY,  

E-Print Network [OSTI]

PROPERTIES OF RESIDUALS FOR SPATIAL POINT PROCESSES A. BADDELEY, University of Western Australia J. MØLLER, University of Aalborg A.G. PAKES, University of Western Australia Abstract For any point process & Statistics M019, University of Western Australia, 35 Stirling Highway, Nedlands WA 6009, Australia Postal

Baddeley, Adrian

318

COMMUNICATION Are Residues in a Protein Folding Nucleus  

E-Print Network [OSTI]

COMMUNICATION Are Residues in a Protein Folding Nucleus Evolutionarily Conserved? Yan Yuan Tseng is the hallmark of life. It is important to understand how protein folding and evolution influence each other in protein folding nucleus as measured by experi- mental f-value and selection pressure as measured by v

Dai, Yang

319

Trigeneration in a northern Chinese village using crop residues  

E-Print Network [OSTI]

Gasification of crop residues can provide modern energy carriers to rural areas at potentially at- tractive in rural areas of developing countries by the introduction of mod- ern, clean energy carriers (e.g., fluid the prospects for providing such energy carriers to a rural village in Jilin province, China: clean gas

320

AIAA-2001-0025 SPECTRUM FATIGUE LIFETIME AND RESIDUAL STRENGTH  

E-Print Network [OSTI]

on a typical fiberglass laminate configuration turbine blade fiberglass material has been undertaken under at various fractions of the lifetime turbine blade materials.. are consistent with the residual strength of fiberglass spectrum have been studied. Data have been obtained for materials produce results that may

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Ammonia volatilization from soils with surface rice straw residue  

E-Print Network [OSTI]

rice residue and related factors on NH3 volatilization from an acid Beaumont clay (pH 5.4) and an alkaline Lake Charles clay (pH 7.4). The treatments in the greenhouse and lab consisted of all possible combinations of the following variables: surface...

Barghassa, Peyam

1995-01-01T23:59:59.000Z

322

Nature/Culture/Seawater  

E-Print Network [OSTI]

This essay considers seawater as a substance and symbol in anthropological and social theory. Seawater has occupied an ambiguous place with respect to anthropological categories of nature and culture. Seawater as nature ...

Helmreich, Stefan

323

Natural gas annual 1996  

SciTech Connect (OSTI)

This document provides information on the supply and disposition of natural gas to a wide audience. The 1996 data are presented in a sequence that follows natural gas from it`s production to it`s end use.

NONE

1997-09-01T23:59:59.000Z

324

Natural Resources Research Institute  

E-Print Network [OSTI]

/Loll ThermoWood Hybrid Poplars Peat A boost for the peat industry Value in Minnesota peat deposits Natural che

Netoff, Theoden

325

Natural gas annual 1994  

SciTech Connect (OSTI)

The Natural Gas Annual provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. The 1994 data are presented in a sequence that follows natural gas (including supplemental supplies) from its production to its end use. This is followed by tables summarizing natural gas supply and disposition from 1990 to 1994 for each Census Division and each State. Annual historical data are shown at the national level.

NONE

1995-11-17T23:59:59.000Z

326

Natural gas annual 1995  

SciTech Connect (OSTI)

The Natural Gas Annual provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. The 1995 data are presented in a sequence that follows natural gas (including supplemental supplies) from its production to its end use. This is followed by tables summarizing natural gas supply and disposition from 1991 to 1995 for each Census Division and each State. Annual historical data are shown at the national level.

NONE

1996-11-01T23:59:59.000Z

327

Sorption characteristics of polycyclic aromatic hydrocarbons in aluminum smelter residues  

SciTech Connect (OSTI)

High temperature carbon oxidation in primary aluminum smelters results in the release of polycyclic aromatic hydrocarbons (PAH) into the environment. The main source of PAH are the anodes, which are composed of petroleum coke (black carbon, BC) and coal tar pitch. To elucidate the dominant carbonaceous phase controlling the environmental fate of PAH in aluminum smelter residues (coke BC and/or coal tar), the sorptive behavior of PAHs has been determined, using passive samplers and infinite-sink desorption methods. Samples directly from the wet scrubber were studied as well as ones from an adjacent 20-year old storage lagoon and roof dust from the smelter. Carbon-normalized distribution coefficients of native PAHs were 2 orders of magnitude higher than expected based on amorphous organic carbon (AOC)/water partitioning, which is in the same order of magnitude as reported literature values for soots and charcoals. Sorption isotherms of laboratory-spiked deuterated phenanthrene showed strong (about 100 times stronger than AOC) but nonetheless linear sorption in both fresh and aged aluminum smelter residues. The absence of nonlinear behavior typical for adsorption to BC indicates that PAH sorption in aluminum smelter residues is dominated by absorption into the semi-solid coal tar pitch matrix. Desorption experiments using Tenax showed that fresh smelter residues had a relatively large rapidly desorbing fraction of PAH (35-50%), whereas this fraction was strongly reduced (11-16%) in the lagoon and roof dust material. Weathering of the coal tar residue and/or redistribution of PAH between coal tar and BC phases could explain the reduced availability in aged samples. 38 refs., 5 figs., 1 tab.

Gijs D. Breedveld; Emilien Pelletier; Richard St. Louis; Gerard Cornelissen [Norwegian Geotechnical Institute, Oslo (Norway)

2007-04-01T23:59:59.000Z

328

EIA - Natural Gas Pipeline Network - Largest Natural Gas Pipeline...  

U.S. Energy Information Administration (EIA) Indexed Site

Interstate Pipelines Table About U.S. Natural Gas Pipelines - Transporting Natural Gas based on data through 20072008 with selected updates Thirty Largest U.S. Interstate Natural...

329

Residual stresses in dielectrics caused by metallization lines and pads  

SciTech Connect (OSTI)

Residual stresses in dielectrics and semiconductors induced by metal lines, pads and vias can have detrimental effects on the performance of devices and electronic packages. Analytical and numerical calculations of these stresses have been performed for two purposes. (1) To illustrate how these stresses relate to the residual stress in the metallization and its geometry; (2) to calibrate a piezo-spectroscopic method for measuring these stresses with high spatial resolution. The results of the calculations have been presented using non-dimensional parameters that both facilitate scaling and provide connections to the stresses in the metal, with or without yielding. Preliminary experimental results obtained for Au/Ge eutectic pads illustrate the potential of the method and the role of the stress analysis.

He, M.Y.; Lipkin, J.; Clarke, D.R. [Univ. of California, Santa Barbara, CA (United States). Materials Dept.] [Univ. of California, Santa Barbara, CA (United States). Materials Dept.; Evans, A.G. [Harvard Univ., Cambridge, MA (United States). Div. of Applied Sciences] [Harvard Univ., Cambridge, MA (United States). Div. of Applied Sciences; Tenhover, M. [Carborundum Co., Niagara Falls, NY (United States)] [Carborundum Co., Niagara Falls, NY (United States)

1996-06-01T23:59:59.000Z

330

The Dissolution of Desicooler Residues in H-Canyon Dissolvers  

SciTech Connect (OSTI)

A series of dissolution and characterization studies has been performed to determine if FB-Line residues stored in desicooler containers will dissolve using a modified H-Canyon processing flowsheet. Samples of desicooler materials were used to evaluate dissolving characteristics in the low-molar nitric acid solutions used in H-Canyon dissolvers. The selection for the H-Canyon dissolution of desicooler residues was based on their high-enriched uranium content and trace levels of plutonium. Test results showed that almost all of the enriched uranium will dissolve from the desicooler materials after extended boiling in one molar nitric acid solutions. The residue that contained uranium after completion of the extended boiling cycle consisted of brown solids that had agglomerated into large pieces and were floating on top of the dissolver solution. Addition of tenth molar fluoride to a three molar nitric acid solution containing boron did not dissolve remaining uranium from the brown solids. Only after boiling in an eight molar nitric acid-tenth molar fluoride solution without boron did remaining uranium and aluminum dissolve from the brown solids. The amount of uranium associated with brown solids would be approximately 1.4 percent of the total uranium content of the desicooler materials. The brown solids that remain in the First Uranium Cycle feed will accumulate at the organic/aqueous interface during solvent extraction operations. Most of the undissolved white residue that remained after extended boiling was aluminum oxide containing additional trace quantities of impurities. However, the presence of mercury used in H-Canyon dissolvers should complete the dissolution of these aluminum compounds.

Gray, J.H.

2003-06-23T23:59:59.000Z

331

Combustion of textile residues in a packed bed  

SciTech Connect (OSTI)

Textile is one of the main components in the municipal waste which is to be diverted from landfill for material and energy recovery. As an initial investigation for energy recovery from textile residues, the combustion of cotton fabrics with a minor fraction of polyester was investigated in a packed bed combustor for air flow rates ranging from 117 to 1638 kg/m{sup 2} h (0.027-0.371 m/s). Tests were also carried out in order to evaluate the co-combustion of textile residues with two segregated waste materials: waste wood and cardboard. Textile residues showed different combustion characteristics when compared to typical waste materials at low air flow rates below 819 kg/m{sup 2} h (0.186 m/s). The ignition front propagated fast along the air channels randomly formed between packed textile particles while leaving a large amount of unignited material above. This resulted in irregular behaviour of the temperature profile, ignition rate and the percentage of weight loss in the ignition propagation stage. A slow smouldering burn-out stage followed the ignition propagation stage. At air flow rates of 1200-1600 kg/m{sup 2} h (0.272-0.363 m/s), the bed had a maximum burning rate of about 240 kg/m{sup 2} h consuming most of the combustibles in the ignition propagation stage. More uniform combustion with an increased burning rate was achieved when textile residues were co-burned with cardboard that had a similar bulk density. (author)

Ryu, Changkook; Phan, Anh N.; Sharifi, Vida N.; Swithenbank, Jim [Sheffield University Waste Incineration Centre (SUWIC), Department of Chemical and Process Engineering, The University of Sheffield, Mappin Street, Sheffield S1 3JD (United Kingdom)

2007-08-15T23:59:59.000Z

332

The effect of magnetic flutter on residual flow  

SciTech Connect (OSTI)

The hypothesis that stochastic magnetic fields disrupt zonal flows associated with ion temperature gradient turbulence saturation is investigated analytically with a residual flow calculation in the presence of magnetic flutter. The calculation starts from the time-asymptotic zero-beta residual flow of Rosenbluth and Hinton [Phys. Rev. Lett. 80, 724 (1998)] with the sudden application of an externally imposed, fixed magnetic field perturbation. The short-time electron response from radial charge loss due to magnetic flutter is calculated from the appropriate gyrokinetic equation. The potential evolution has quadratic behavior, with a zero crossing at finite time. The crossing time and its parametric dependencies are compared with numerical results from a gyrokinetic simulation of residual flow in the presence of magnetic flutter. The numerical and analytical results are in good agreement and support the hypothesis that the high-beta runaway of numerical simulations is a result of the disabling of zonal flows by finite-beta charge losses associated with magnetic flutter.

Terry, P. W.; Pueschel, M. J.; Carmody, D. [Department of Physics, University of Wisconsin-Madison, Madison, Wisconsin 53706 (United States)] [Department of Physics, University of Wisconsin-Madison, Madison, Wisconsin 53706 (United States); Nevins, W. M. [Lawrence Livermore National Laboratory, Livermore, California 94551 (United States)] [Lawrence Livermore National Laboratory, Livermore, California 94551 (United States)

2013-11-15T23:59:59.000Z

333

Residual Stress Evaluation within a Crimped Splice Connector Assembly  

SciTech Connect (OSTI)

In power transmission, connectors play an important role in the efficiency and reliability of the system. Due to the increase of power demand and lack of new infrastructure, existing overhead power transmission lines often need to operate at temperatures higher than the original design criteria. However, this had led to the accelerated aging and degradation of splice connectors, which has been manifested by the formation of hot-spots that have been revealed by infrared imaging during inspection of transmission lines operating at elevated temperatures. The implications of connector aging is two-fold: (1) significant increase in resistivity of the splice connector (i.e., less efficient transmission of electricity) and (2) significant reduction in the connector clamping strength, which ultimately results in separation of the power transmission line at the joint. Therefore, the splice connector has become the weakest link in the electric power transmission infrastructure. The compressive residual stresses induced by the crimping process within the splice provide the clamping forces to secure the conductor and therefore, the determination of the state of residual stresses in splice connectors is a necessary requirement to provide an accurate estimate of their service lifetime. This paper presents a protocol of utilizing finite-element analysis and neutron scattering experiments for evaluating the residual stress fields within a crimped single-stage splice connector assembly.

Wang, Jy-An John [ORNL; An, Ke [ORNL; Lara-Curzio, Edgar [ORNL; Hubbard, Camden R [ORNL; King Jr, Thomas J [ORNL; Graziano, Joe [Tennessee Valley Authority (TVA); Chan, John [Electric Power Research Institute (EPRI)

2006-01-01T23:59:59.000Z

334

THE METHOD OF CONJUGATE RESIDUALS FOR SOLVING THE GALERKIN EQUATIONS ASSOCIATED WITH SYMMETRIC  

E-Print Network [OSTI]

kind integral equations, conjugate gradient type methods, Galerkin method, regularization schemesTHE METHOD OF CONJUGATE RESIDUALS FOR SOLVING THE GALERKIN EQUATIONS ASSOCIATED WITH SYMMETRIC, the method of conjugate residuals is consid- ered. An a posteriori stopping rule is introduced

Plato, Robert

335

Making Photosynthetic Biofuel Renewable: Recovering Phosphorus from Residual Biomass J. M. Gifford and P. Westerhoff  

E-Print Network [OSTI]

Making Photosynthetic Biofuel Renewable: Recovering Phosphorus from Residual Biomass J. M. Gifford to global warming. Biofuel from phototrophic microbes like algae and bacteria provides a viable substitute improves biofuel sustainability by refining phosphorus recycling. Biomass Production Residual Biomass

Hall, Sharon J.

336

E-Print Network 3.0 - aspartic acid residues Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Scott1 and Barry LStoddard 2* Summary: -links are each consistent with a parallel coiled coil structure, residues 1-36 of the aspartate receptor were... residues 23-180 of the...

337

E-Print Network 3.0 - acid residues involved Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

contacts, however... acid residues with small side-chains (Gly, Ala, Ser, Cys) allow tight helix packing by mediating strong... ) amino acid residues. We propose the use of the...

338

E-Print Network 3.0 - air-pollution-control residues leaching...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

leaching Search Powered by Explorit Topic List Advanced Search Sample search results for: air-pollution-control residues leaching Page: << < 1 2 3 4 5 > >> 1 Solid Residues from...

339

Liquefied Natural Gas (Iowa)  

Broader source: Energy.gov [DOE]

This document adopts the standards promulgated by the National Fire Protection Association as rules for the transportation, storage, handling, and use of liquefied natural gas. The NFPA standards...

340

Natural gas dehydration apparatus  

DOE Patents [OSTI]

A process and corresponding apparatus for dehydrating gas, especially natural gas. The process includes an absorption step and a membrane pervaporation step to regenerate the liquid sorbent.

Wijmans, Johannes G; Ng, Alvin; Mairal, Anurag P

2006-11-07T23:59:59.000Z

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Natural Resources Specialist  

Broader source: Energy.gov [DOE]

(See Frequently Asked Questions for more information). Where would I be working ? Western Area Power Administration, Corporate Services Office, Office of the Chief Operating Officer, Natural...

342

Natural Heritage Program (Missouri)  

Broader source: Energy.gov [DOE]

Natural Heritage Reviews are conducted by the Missouri Department of Conservation on request in order to assess proposed project sites and adjacent lands. Reviews determine whether potential...

343

Natural Cooling Retrofit  

E-Print Network [OSTI]

of the most important design considerations for any method of Natural Cool ing is the chil led water temperature range selected for use during Natural Cool ing. Figure VI shows that for a hypo thetical Chicago plant, the hours of operation for a Natural..." system on the Natural Cool ing cycle. As the pressures and flow rates of the condenser and chil led water systems are seldom the same, the designer must pay careful attention to the cross over system design to ensure harmonious operations on both...

Fenster, L. C.; Grantier, A. J.

1981-01-01T23:59:59.000Z

344

,"Colorado Natural Gas Prices"  

U.S. Energy Information Administration (EIA) Indexed Site

Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Colorado Natural Gas Prices",8,"Monthly","112014","1151989" ,"Release Date:","1302015"...

345

Natural gas annual 1997  

SciTech Connect (OSTI)

The Natural Gas Annual provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. The 1997 data are presented in a sequence that follows natural gas (including supplemental supplies) from its production to its end use. This is followed by tables summarizing natural gas supply and disposition from 1993 to 1997 for each Census Division and each State. Annual historical data are shown at the national level. 27 figs., 109 tabs.

NONE

1998-10-01T23:59:59.000Z

346

Warner College of Natural Resources Warner College of Natural  

E-Print Network [OSTI]

, and scientific investigation of renewable and nonrenewable natural resources. Programs include the study of everyWarner College of Natural Resources Warner College of Natural Resources Office in Natural Resources, and Conservation Biology Forestry Geology Natural Resource Recreation and Tourism Natural Resources Management

Collett Jr., Jeffrey L.

347

Residuals in steel products -- Impacts on properties and measures to minimize them  

SciTech Connect (OSTI)

The effect of major residual elements on the properties of steel products is summarized. Measures to minimize these elements are discussed including the pretreatment of raw materials, innovative refining processes and environmental issues. This paper addresses (1) scrap situation, (2) upper limit of residual concentrations acceptable for processing and product quality, (3) possible means to reduce the residuals, and (4) consideration on the practicable measures to solve the residuals problem in a systematic way. 52 refs.

Emi, Toshihiko [Tohoku Univ., Sendai (Japan). Inst. for Advanced Materials Processing; Wijk, O. [Royal Inst. of Tech., Stockholm (Sweden). Dept. of Process Metallurgy

1996-12-31T23:59:59.000Z

348

Burning Forest Residues231 Corstorphine Road www.forestry.gov.uk  

E-Print Network [OSTI]

, for disposal of coppice, to reduce specific weeds and to aid land use conversion. BURNING RESIDUES: TYPES

349

Residual Stress Relaxation and Microstructure in ZnO Thin Films Istem Ozena  

E-Print Network [OSTI]

to be eliminated during deposition. Introduction In this study, the decay of the residual stressesResidual Stress Relaxation and Microstructure in ZnO Thin Films Istem Ozena and Mehmet Ali Gulgunb. a istem@sabanciuniv.edu b m-gulgun@sabanciuniv.edu Keywords: ZnO, thin films, residual stress

Yanikoglu, Berrin

350

NONLINEAR SAW PROPAGATION IN THIN-FILM SYSTEMS WITH RESIDUAL STRESS* R. E. Kumon  

E-Print Network [OSTI]

harmonics. I. INTRODUCTION AND MOTIVATION The thin-film deposition process can create large residualNONLINEAR SAW PROPAGATION IN THIN-FILM SYSTEMS WITH RESIDUAL STRESS* R. E. Kumon National Institute is the residual stress. The effective elas- tic constants and density are given by Ceff ijkl = Cijkl(1 - eres

351

Microstructure, residual stress, and fracture of sputtered TiN films Liqiang Zhang a  

E-Print Network [OSTI]

Microstructure, residual stress, and fracture of sputtered TiN films Liqiang Zhang a , Huisheng Keywords: TiN films Residual stress Hardness Fracture toughness Morphology, structure, residual stress, hardness, and fracture toughness of magnetron sputtered titanium nitride (TiN) thin films, deposited at 300

Volinsky, Alex A.

352

Using mobile distributed pyrolysis facilities to deliver a forest residue resource for bio-fuel production  

E-Print Network [OSTI]

reduces the energy content of forest residues delivered to a bio-fuel facility as mobile facilities use by bio-oil, bio-slurry and torrefied wood is 45%, 65% and 87% of the initial forest residue energyUsing mobile distributed pyrolysis facilities to deliver a forest residue resource for bio

Victoria, University of

353

Prediction of Protein Interaction Sites From Sequence Profile and Residue Neighbor List  

E-Print Network [OSTI]

Prediction of Protein Interaction Sites From Sequence Profile and Residue Neighbor List Huan Protein­protein interaction sites are predicted from a neural network with sequence profiles correctly predicted residues account for 65% of the 11,805 residues making up the 129 interfaces. The main

Weston, Ken

354

Environmental and economic evaluation of energy recovery from agricultural and forestry residues  

SciTech Connect (OSTI)

Four conversion methods and five residues are examined in this report, which describes six model systems: hydrolysis of corn residues, pyrolysis of corn residues, combustion of cotton-ginning residues, pyrolysis of wheat residues, fermentation of molasses, and combustion of pulp and papermill wastes. Estimates of material and energy flows for those systems are given per 10/sup 12/ Btu of recovered energy. Regional effects are incorporated by addressing the regionalized production of the residues. A national scope cannot be provided for every residue considered because of the biological and physical constraints of crop production. Thus, regionalization of the model systems to the primary production region for the crop from which the residue is obtained has been undertaken. The associated environmental consequences of residue utilization are then assessed for the production region. In addition, the environmental impacts of operating the model systems are examined by quantifying the residuals generated and the land, water, and material requirements per 10/sup 12/ Btu of energy generated. On the basis of estimates found in the literature, capital, operating, and maintenance cost estimates are given for the model systems. These data are also computed on the basis of 10/sup 12/ Btu of energy recovered. The cost, residual, material, land, and water data were then organized into a format acceptable for input into the SEAS data management program. The study indicates that the most serious environmental impacts arise from residue removal rather than from conversion.

None

1980-09-01T23:59:59.000Z

355

Submillimeter residual losses in high-{Tc} superconductors  

SciTech Connect (OSTI)

Bolometry was used obtain accurate submillimeter residual loss data for epitaxial films of YBa{sub 2}Cu{sub 3}O{sub 7} (YBCO), Tl{sub 2}Ca{sub 2}Ba{sub 2}Cu{sub 3}O{sub 10}, Tl{sub 2}CaBa{sub 2}Cu{sub 2}O{sub 8} (TCBCO), and Ba{sub 0.6}K{sub 0.4}BiO{sub 3} (BKBO). We were able to fit the absorptivity measured for Nb films to an Eliashberg strong coupling calculation; excellent agreement resulted between parameters from best fits and measured Residual Resistivity Ratio. Microwave surface resistance measurements made on the same YBCO and TCBCO films are in excellent agreement with submillimeter measurements. Absorptivities for all YBCO films studied are qualitatively similar, increasing smoothly with frequency, with no gap-like features below the well known absorption edge at 450 cm{sup {minus}1}. Losses in YBCO films were fit to a weakly coupled grain model for the a-b plane conductivity. Strong phonon structure was observed in TCBCO films between 60 and 700 cm{sup {minus}1} (2 THz and 23 THz); these losses could not be fitted to the simple weakly coupled grain model, in contrast to the case for other high-{Tc} superconductors where phonon structure observed in ceramics are is absent in epitaxial oriented films and crystals because of electronic screening due to high conductivity of a-b planes. Absorptivity data for the BKBO films all show a strong absorption onset near the BCS tunneling gap of 3.5 k{sub B}{Tc}. Comparison with strong coupling Eliashberg predictions and of a Kramers-Kronig analysis indicate that the absorption onset is consistent with a superconducting energy gap. Effects of magnetic field on residual losses in YBCO films show a resonant absorption feature in vicinity of predicted

Miller, D.

1993-09-01T23:59:59.000Z

356

Residual stresses in bakelite models induced by quenching  

E-Print Network [OSTI]

and the bellows was extended to six inobes. Lifter proper focusing and using a Kodachrome type 4 film, separate piotures were made at openings f8, fll, f16, and f22 in order to provide for a suitable spread of exposure. Sodium vapor was used as the source... for determining the residual stresses or the elastic redistribution of stresses that occurs after the prototype has undergone some plastio deformation or heat treatment. The creep characteristics of bakelite, BT-61-893, become appreciable with temperatures...

Jarvi, Ray Victor

1952-01-01T23:59:59.000Z

357

Radon transform on a space over a residue class ring  

SciTech Connect (OSTI)

The functions on a space of dimension N over the residue class ring Z{sub n} modulo n that are invariant with respect to the group GL(N,Z{sub n}) form a commutative convolution algebra. We describe the structure of this algebra and find the eigenvectors and eigenvalues of the operators of multiplication by elements of this algebra. The results thus obtained are applied to solve the inverse problem for the hyperplane Radon transform on Z{sup N}{sub n}. Bibliography: 2 titles.

Molchanov, Vladimir F [Tambov State University, Tambov (Russian Federation)

2012-05-31T23:59:59.000Z

358

Innovative Treatment Technologies for Natural Waters and Wastewaters  

SciTech Connect (OSTI)

The research described in this report focused on the development of novel membrane contactor processes (in particular, forward osmosis (FO), pressure retarded osmosis (PRO), and membrane distillation (MD)) in low energy desalination and wastewater treatment applications and in renewable energy generation. FO and MD are recently gaining national and international attention as viable, economic alternatives for removal of both established and emerging contaminants from natural and process waters; PRO is gaining worldwide attention as a viable source of renewable energy. The interrelationship of energy and water are at the core of this study. Energy and water are inextricably bound; energy usage and production must be considered when evaluating any water treatment process for practical application. Both FO and MD offer the potential for substantial energy and resource savings over conventional treatment processes and PRO offers the potential for renewable energy or energy offsets in desalination. Combination of these novel technologies with each other, with existing technologies (e.g., reverse osmosis (RO)), and with existing renewable energy sources (e.g., salinity gradient solar ponds) may enable much less expensive water production and also potable water production in remote or distributed locations. Two inter-related projects were carried out in this investigation. One focused on membrane bioreactors for wastewater treatment and PRO for renewable energy generation; the other focused on MD driven by a salinity gradient solar pond.

Childress, Amy E.

2011-07-01T23:59:59.000Z

359

47 Natural Gas Market Trends NATURAL GAS MARKET TRENDS  

E-Print Network [OSTI]

47 Natural Gas Market Trends Chapter 5 NATURAL GAS MARKET TRENDS INTRODUCTION Natural gas discusses current natural gas market conditions in California and the rest of North America, followed on the outlook for demand, supply, and price of natural gas for the forecasted 20-year horizon. It also addresses

360

Nature Preserves (North Dakota)  

Broader source: Energy.gov [DOE]

The Parks and Recreation Department is responsible for managing and acquiring designated nature areas in the state of North Dakota. New construction and development is severely restricted on these...

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

NATURAL MARINE HYDROCARBON SEEPAGE  

E-Print Network [OSTI]

affects ocean chemistry (Dando and Hovland, 1992) and provides a natural source of petroleum pollution the water column above submarine vents, plumes of hydrocarbon gas bubbles act as acoustic scattering targets

Luyendyk, Bruce

362

Natural Resource Specialist  

Broader source: Energy.gov [DOE]

A successful candidate in this position will serve as a Natural Resource Specialist responsible for participating in the development and implementation of short-term and long-term regional (multi...

363

Natural Gas Regulations (Kentucky)  

Broader source: Energy.gov [DOE]

Kentucky Administrative Regulation title 805 promulgates the rules and regulations pertaining to natural gas production in Kentucky. In addition to KAR title 405, chapter 30, which pertains to any...

364

Natural gas monthly  

SciTech Connect (OSTI)

This document highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Data presented include volume and price, production, consumption, underground storage, and interstate pipeline activities.

NONE

1996-05-01T23:59:59.000Z

365

Quarry residuals RI/FS scoping document. [Weldon Spring quarry  

SciTech Connect (OSTI)

The purpose of this document is to serve as a planning tool for the implementation of the Quarry Residual Remedial Investigation/Feasibility Study (RI/FS) process and to provide direct input to revising and updating the 1988 Work Plan for the Weldon Spring Site Remedial Action Project (WSSRAP) Remedial Investigation/Feasibility Study-Environmental Impact Statement for the Weldon Spring Site (RI/FS-EIS) (Peterson et al. 1988) for this effort. The scoping process is intended to outline the tasks necessary to develop and implement activities in compliance with the Comprehensive Environmental Response, Compensation and Liability Act-National Environmental Policy Act (CERCLA-NEPA) process from detailed planning through the appropriate decision document. In addition to scoping the entire process, this document will serve as the primary tool for planning and accomplishing all activities to be developed in the Quarry Residual RI/FS Work Plan. Subsequent tasks are difficult to plan at this time. 10 refs., 5 figs., 5 tabs.

Not Available

1991-10-01T23:59:59.000Z

366

Estimating Residual Solids Volume In Underground Storage Tanks  

SciTech Connect (OSTI)

The Savannah River Site liquid waste system consists of multiple facilities to safely receive and store legacy radioactive waste, treat, and permanently dispose waste. The large underground storage tanks and associated equipment, known as the 'tank farms', include a complex interconnected transfer system which includes underground transfer pipelines and ancillary equipment to direct the flow of waste. The waste in the tanks is present in three forms: supernatant, sludge, and salt. The supernatant is a multi-component aqueous mixture, while sludge is a gel-like substance which consists of insoluble solids and entrapped supernatant. The waste from these tanks is retrieved and treated as sludge or salt. The high level (radioactive) fraction of the waste is vitrified into a glass waste form, while the low-level waste is immobilized in a cementitious grout waste form called saltstone. Once the waste is retrieved and processed, the tanks are closed via removing the bulk of the waste, chemical cleaning, heel removal, stabilizing remaining residuals with tailored grout formulations and severing/sealing external penetrations. The comprehensive liquid waste disposition system, currently managed by Savannah River Remediation, consists of 1) safe storage and retrieval of the waste as it is prepared for permanent disposition; (2) definition of the waste processing techniques utilized to separate the high-level waste fraction/low-level waste fraction; (3) disposition of LLW in saltstone; (4) disposition of the HLW in glass; and (5) closure state of the facilities, including tanks. This paper focuses on determining the effectiveness of waste removal campaigns through monitoring the volume of residual solids in the waste tanks. Volume estimates of the residual solids are performed by creating a map of the residual solids on the waste tank bottom using video and still digital images. The map is then used to calculate the volume of solids remaining in the waste tank. The ability to accurately determine a volume is a function of the quantity and quality of the waste tank images. Currently, mapping is performed remotely with closed circuit video cameras and still photograph cameras due to the hazardous environment. There are two methods that can be used to create a solids volume map. These methods are: liquid transfer mapping / post transfer mapping and final residual solids mapping. The task is performed during a transfer because the liquid level (which is a known value determined by a level measurement device) is used as a landmark to indicate solids accumulation heights. The post transfer method is primarily utilized after the majority of waste has been removed. This method relies on video and still digital images of the waste tank after the liquid transfer is complete to obtain the relative height of solids across a waste tank in relation to known and usable landmarks within the waste tank (cooling coils, column base plates, etc.). In order to accurately monitor solids over time across various cleaning campaigns, and provide a technical basis to support final waste tank closure, a consistent methodology for volume determination has been developed and implemented at SRS.

Clark, Jason L.; Worthy, S. Jason; Martin, Bruce A.; Tihey, John R.

2014-01-08T23:59:59.000Z

367

EIA - Natural Gas Pipeline Network - Natural Gas Supply Basins...  

Gasoline and Diesel Fuel Update (EIA)

with selected updates U.S. Natural Gas Supply Basins Relative to Major Natural Gas Pipeline Transportation Corridors, 2008 U.S. Natural Gas Transporation Corridors out of Major...

368

A Multi-Factor Analysis of Sustainable Agricultural Residue Removal Potential  

SciTech Connect (OSTI)

Agricultural residues have significant potential as a near term source of cellulosic biomass for bioenergy production, but sustainable removal of agricultural residues requires consideration of the critical roles that residues play in the agronomic system. Previous work has developed an integrated model to evaluate sustainable agricultural residue removal potential considering soil erosion, soil organic carbon, greenhouse gas emission, and long-term yield impacts of residue removal practices. The integrated model couples the environmental process models WEPS, RUSLE2, SCI, and DAYCENT. This study uses the integrated model to investigate the impact of interval removal practices in Boone County, Iowa, US. Residue removal of 4.5 Mg/ha was performed annually, bi-annually, and tri-annually and were compared to no residue removal. The study is performed at the soil type scale using a national soil survey database assuming a continuous corn rotation with reduced tillage. Results are aggregated across soil types to provide county level estimates of soil organic carbon changes and individual soil type soil organic matter content if interval residue removal were implemented. Results show interval residue removal is possible while improving soil organic matter. Implementation of interval removal practices provide greater increases in soil organic matter while still providing substantial residue for bioenergy production.

Jared Abodeely; David Muth; Paul Adler; Eleanor Campbell; Kenneth Mark Bryden

2012-10-01T23:59:59.000Z

369

Welcome FUPWG- Natural Gas Overview  

Broader source: Energy.gov [DOE]

Presentation—given at the Federal Utility Partnership Working Group (FUPWG) Fall 2008 meeting—provides an overview of natural gas, including emissions, compressed natural gas (CNG) vehicles, and landfill gas supplement for natural gas system.

370

Regulatory Closure Options for the Residue in the Hanford Site Single-Shell Tanks  

SciTech Connect (OSTI)

Liquid, mixed, high-level radioactive waste (HLW) has been stored in 149 single-shell tanks (SSTS) located in tank farms on the U.S. Department of Energy's (DOE's) Hanford Site. The DOE is developing technologies to retrieve as much remaining HLW as technically possible prior to physically closing the tank farms. In support of the Hanford Tanks Initiative, Sandia National Laboratories has addressed the requirements for the regulatory closure of the radioactive component of any SST residue that may remain after physical closure. There is significant uncertainty about the end state of each of the 149 SSTS; that is, the nature and amount of wastes remaining in the SSTS after retrieval is uncertain. As a means of proceeding in the face of these uncertainties, this report links possible end-states with associated closure options. Requirements for disposal of HLW and low-level radioactive waste (LLW) are reviewed in detail. Incidental waste, which is radioactive waste produced incidental to the further processing of HLW, is then discussed. If the low activity waste (LAW) fraction from the further processing of HLW is determined to be incidental waste, then DOE can dispose of that incidental waste onsite without a license from the U.S. Nuclear Regulatory Commissions (NRC). The NRC has proposed three Incidental Waste Criteria for determining if a LAW fraction is incidental waste. One of the three Criteria is that the LAW fraction should not exceed the NRC's Class C limits.

Cochran, J.R. Shyr, L.J.

1998-10-05T23:59:59.000Z

371

Risk management considerations for seismic upgrading of an older facility for short-term residue stabilization  

SciTech Connect (OSTI)

Building 707 and its addition, Building 707A, were selected, after the production mission of Rocky Flats was terminated a few years ago, to stabilize many of the plutonium residues remaining at the site by 2002. The facility had undergone substantial safety improvements to its safety systems and conduct of operations for resumption of plutonium operations in the early 1990s and appeared ideally suited for this new mission to support accelerated Site closure. During development of a new authorization basis, a seismic evaluation was performed. This evaluation addressed an unanalyzed expansion joint and suspect connection details for the precast concrete tilt-up construction and concluded that the seismic capacity of the facility is less than half of that determined by previous analysis. Further, potential seismic interaction was identified between a collapsing Building 707 and the seismically upgraded Building 707A, possibly causing the partial collapse of the latter. Both the operating contractor and the Department of Energy sought a sound technical basis for deciding how to proceed. This paper addresses the risks of the as-is facility and possible benefits of upgrades to support a decision on whether to upgrade the seismic capacity of Building 707, accept the risk of the as-is facility for its short remaining mission, or relocate critical stabilization missions. The paper also addresses the Department of Energy`s policy on natural phenomena.

Additon, S.L.; Peregoy, W.L. [TENERA Rocky Flats, LLC, Golden, CO (United States); Foppe, T.L. [Foppe and Associates, Inc., Golden, CO (United States)

1999-06-01T23:59:59.000Z

372

Allowable Residual Contamination Levels in soil for decommissioning the Shippingport Atomic Power Station site  

SciTech Connect (OSTI)

As part of decommissioning the Shippingport Atomic Power Station, a fundamental concern is the determination of Allowable Residual Contamination Levels (ARCL) for radionuclides in the soil at the site. The ARCL method described in this report is based on a scenario/exposure-pathway analysis and compliance with an annual dose limit for unrestricted use of the land after decommissioning. In addition to naturally occurring radionuclides and fallout from weapons testing, soil contamination could potentially come from five other sources. These include operation of the Shippingport Station as a pressurized water reactor, operations of the Shippingport Station as a light-water breeder, operation of the nearby Beaver Valley reactors, releases during decommissioning, and operation of other nearby industries, including the Bruce-Mansfield coal-fired power plants. ARCL values are presented for 29 individual radionculides and a worksheet is provided so that ARCL values can be determined for any mixture of the individual radionuclides for any annual dose limit selected. In addition, a worksheet is provided for calculating present time soil concentration value that will decay to the ARCL values after any selected period of time, such as would occur during a period of restricted access. The ARCL results are presented for both unconfined (surface) and confined (subsurface) soil contamination. The ARCL method and results described in this report provide a flexible means of determining unrestricted-use site release conditions after decommissioning the Shippingport Atomic Power Station.

Kennedy, W.E. Jr.; Napier, B.A.; Soldat, J.K.

1983-09-01T23:59:59.000Z

373

Quantification of residual stress from photonic signatures of fused silica  

SciTech Connect (OSTI)

A commercially available grey-field polariscope (GFP) instrument for photoelastic examination is used to assess impact damage inflicted upon the outer-most pane of Space Shuttle windows made from fused silica. A method and apparatus for calibration of the stress-optic coefficient using four-point bending is discussed. The results are validated on known material (acrylic) and are found to agree with literature values to within 6%. The calibration procedure is then applied to fused-silica specimens and the stress-optic coefficient is determined to be 2.43 ± 0.54 × 10{sup ?12} Pa{sup ?1}. Fused silica specimens containing impacts artificially made at NASA’s Hypervelocity Impact Technology Facility (HIT-F), to simulate damage typical during space flight, are examined. The damage sites are cored from fused silica window carcasses and examined with the GFP. The calibrated GFP measurements of residual stress patterns surrounding the damage sites are presented.

Cramer, K. Elliott; Yost, William T. [NASA Langley Research Center, Hampton, VA 23681 (United States); Hayward, Maurice [College of William and Mary, Williamsburg, VA 23185 (United States)

2014-02-18T23:59:59.000Z

374

Description of the prototype diagnostic residual gas analyzer for ITER  

SciTech Connect (OSTI)

The diagnostic residual gas analyzer (DRGA) system to be used during ITER tokamak operation is being designed at Oak Ridge National Laboratory to measure fuel ratios (deuterium and tritium), fusion ash (helium), and impurities in the plasma. The eventual purpose of this instrument is for machine protection, basic control, and physics on ITER. Prototyping is ongoing to optimize the hardware setup and measurement capabilities. The DRGA prototype is comprised of a vacuum system and measurement technologies that will overlap to meet ITER measurement requirements. Three technologies included in this diagnostic are a quadrupole mass spectrometer, an ion trap mass spectrometer, and an optical penning gauge that are designed to document relative and absolute gas concentrations.

Younkin, T. R., E-mail: tyounkin@gatech.edu [Fusion and Materials for Nuclear Systems Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831-6169 (United States); Georgia Institute of Technology, Woodruff School of Mechanical Engineering – Nuclear and Radiological Engineering Program, Atlanta, Georgia 30332 (United States); Biewer, T. M.; Klepper, C. C.; Marcus, C. [Fusion and Materials for Nuclear Systems Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831-6169 (United States)

2014-11-15T23:59:59.000Z

375

Cost Methodology for Biomass Feedstocks: Herbaceous Crops and Agricultural Residues  

SciTech Connect (OSTI)

This report describes a set of procedures and assumptions used to estimate production and logistics costs of bioenergy feedstocks from herbaceous crops and agricultural residues. The engineering-economic analysis discussed here is based on methodologies developed by the American Society of Agricultural and Biological Engineers (ASABE) and the American Agricultural Economics Association (AAEA). An engineering-economic analysis approach was chosen due to lack of historical cost data for bioenergy feedstocks. Instead, costs are calculated using assumptions for equipment performance, input prices, and yield data derived from equipment manufacturers, research literature, and/or standards. Cost estimates account for fixed and variable costs. Several examples of this costing methodology used to estimate feedstock logistics costs are included at the end of this report.

Turhollow Jr, Anthony F [ORNL; Webb, Erin [ORNL; Sokhansanj, Shahabaddine [ORNL

2009-12-01T23:59:59.000Z

376

Residual Stress Determination for A Ferritic Steel Weld Plate  

SciTech Connect (OSTI)

The primary objective of this experiment is to demonstrate the capability of neutron diffraction technique to reproducibly map residual strains in a ferritic steel weld. The objective includes the identification of corrections for variations in metal composition due to the welding process which produces changes in lattice parameter that are not due to mechanical effects. The second objective is to develop and demonstrate a best practice for neutron diffraction strain mapping of steel welds. The appropriate coordinate system for the measurement of a weld, which is strongly distorted from planar geometry, has to be defined. The coordinate system is important in determining the procedures for mounting and positioning of the weld so that mapping details, especially in regions of high gradients, can be conveniently inter-compared between laboratories.

Wang, D.-Q.; Hubbard, C.R.; Spooner, S.

1999-10-01T23:59:59.000Z

377

Residue temperatures in intermediate energy nucleus-nucleus collisions  

SciTech Connect (OSTI)

With an improved Boltzmann-Uehling-Uhlenbeck (BUU) model, we have investigated the reaction dynamics leading to the thermal freeezout for [sup 40]Ar+[sup 124]Sn collisions. Several criteria are assessed for defining the proper thermal freezout time which separates preequilibrium processes from equilbrium processes. One of these criteria, the time dependence of the thermal excitation energy, provides consistent results for defining the thermal freezeout. The other two criteria, the emission rate of nucleons and the quadrupole moment of the momentum distributions, do not consistently provide accurate freezeout times due to the existence of long time scale collective vibrations. The predicted values for the excitation energies and temperatures, obtained assuming Fermi gas level densities, are quite sensitive to the equation of state and the impact parameter. Surprisingly, both the thermal excitation energies and the residue temperatures, in the limit of a large ensemble of parallel collisions, show little sensitivity to the in-medium nucleon-nucleon cross section.

Xu, H.M.; Lynch, W.G.; Danielewicz, P. (National Superconducting Cyclotron Laboratory and Department of Physics, Michigan State University, East Lansing, Michigan 48824 (United States) Cyclotron Institute, Texas A M University, College Station, Texas 77843 (United States))

1994-09-01T23:59:59.000Z

378

Residual energy in magnetohydrodynamic turbulence and in the solar wind  

E-Print Network [OSTI]

Recent observations indicate that kinetic and magnetic energies are not in equipartition in the solar wind turbulence. Rather, magnetic fluctuations are more energetic and have somewhat steeper energy spectrum compared to the velocity fluctuations. This leads to the presence of the so-called residual energy E_r=E_v-E_b in the inertial interval of turbulence. This puzzling effect is addressed in the present paper in the framework of weak turbulence theory. Using a simple model of weakly colliding Alfv\\'en waves, we demonstrate that the kinetic-magnetic equipartition indeed gets broken as a result of nonlinear interaction of Alfv\\'en waves. We establish that magnetic energy is indeed generated more efficiently as a result of these interactions, which proposes an explanation for the solar wind observations.

Stanislav Boldyrev; Jean Carlos Perez; Vladimir Zhdankin

2011-08-30T23:59:59.000Z

379

Historical Natural Gas Annual 1999  

U.S. Energy Information Administration (EIA) Indexed Site

1999 The Historical Natural Gas Annual contains historical information on supply and disposition of natural gas at the national, regional, and State level as well as prices at...

380

Natural Gas | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Fossil Natural Gas Natural Gas September 15, 2014 NETL Releases Hydraulic Fracturing Study The National Energy Technology Laboratory has released a technical report on the...

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

EIA - Natural Gas Publications  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 633 622 56623Primary MetalsOriginCapacityNatural Gas

382

The fate and behaviour of enhanced natural radioactivity with respect to environmental protection  

SciTech Connect (OSTI)

In contrast to the monitoring and prevention of occupational radiation risk caused by enhanced natural radioactivity, relatively little attention has been paid to the environmental impact associated with residues containing enhanced activity concentration of naturally occurring radionuclides. Such materials are often deposited directly into the environment, a practice which is strictly forbidden in the management of other types of radioactive waste. In view of the new trends in radiation protection, the need to consider the occurrence of anthropogenically enhanced natural radioactivity as a particular unique case of environmental hazard is quite apparent. Residues containing high activity concentrations of some natural radionuclides differ from radioactive materials arising from the nuclear industry. In addition, the radiation risk is usually combined with the risk caused by other pollutants. As such and to date, there are no precise regulations regarding this matter and moreover, the non-nuclear industry is often not aware of potential environmental problems caused by natural radioactivity. This article discusses aspects of environmental radiation risks caused by anthropogenically enhanced natural radioactivity stored at unauthorised sites. Difficulties and inconclusiveness in the application of recommendations and models for radiation risk assessment are explored. General terms such as 'environmental effects' and the basic parameters necessary to carry out consistent and comparable Environmental Risk Assessment (ERA) have been developed and defined. - Highlights: Black-Right-Pointing-Pointer Features of environmental impact caused by residues containing high activity concentration of natural radionuclides Black-Right-Pointing-Pointer Definition of an effect of radiation on an ecosystem and novel method for its assessment Black-Right-Pointing-Pointer Radiation protection regulation inconclusiveness in the aspects of enhanced natural radioactivity.

Michalik, B., E-mail: b.michalik@gig.eu [Laboratory of Radiometry, Central Mining Institute (GIG), Plac Gwarkow 1, 40-166 Katowice (Poland); Brown, J., E-mail: Justin.Brown@nrpa.no [Norwegian Radiation Protection Authority (NRPA), Grini naeringspark 13, 1361 Osteras Norway (Norway); Krajewski, P., E-mail: krajewski@clor.waw.pl [Central Laboratory for Radiological Protection (CLOR), ul. Konwaliowa 7, 03-194 Warszawa Poland (Poland)

2013-01-15T23:59:59.000Z

383

Thorium, uranium and rare earth elements content in lanthanide concentrate (LC) and water leach purification (WLP) residue of Lynas advanced materials plant (LAMP)  

SciTech Connect (OSTI)

Lynas Advanced Materials Plant (LAMP) has been licensed to produce the rare earths elements since early 2013 in Malaysia. LAMP processes lanthanide concentrate (LC) to extract rare earth elements and subsequently produce large volumes of water leach purification (WLP) residue containing naturally occurring radioactive material (NORM). This residue has been rising up the environmental issue because it was suspected to accumulate thorium with significant activity concentration and has been classified as radioactive residue. The aim of this study is to determine Th-232, U-238 and rare earth elements in lanthanide concentrate (LC) and water leach purification (WLP) residue collected from LAMP and to evaluate the potential radiological impacts of the WLP residue on the environment. Instrumental Neutron Activation Analysis and ?-spectrometry were used for determination of Th, U and rare earth elements concentrations. The results of this study found that the concentration of Th in LC was 1289.7 ± 129 ppm (5274.9 ± 527.6Bq/kg) whereas the Th and U concentrations in WLP were determined to be 1952.9±17.6 ppm (7987.4 ± 71.9 Bq/kg) and 17.2 ± 2.4 ppm respectively. The concentrations of Th and U in LC and WLP samples determined by ?- spectrometry were 1156 ppm (4728 ± 22 Bq/kg) and 18.8 ppm and 1763.2 ppm (7211.4 Bq/kg) and 29.97 ppm respectively. This study showed that thorium concentrations were higher in WLP compare to LC. This study also indicate that WLP residue has high radioactivity of {sup 232}Th compared to Malaysian soil natural background (63 - 110 Bq/kg) and come under preview of Act 304 and regulations. In LC, the Ce and Nd concentrations determined by INAA were 13.2 ± 0.6% and 4.7 ± 0.1% respectively whereas the concentrations of La, Ce, Nd and Sm in WLP were 0.36 ± 0.04%, 1.6%, 0.22% and 0.06% respectively. This result showed that some amount of rare earth had not been extracted and remained in the WLP and may be considered to be reextracted.

AL-Areqi, Wadeeah M., E-mail: walareqi@yahoo.com; Majid, Amran Ab., E-mail: walareqi@yahoo.com; Sarmani, Sukiman, E-mail: walareqi@yahoo.com [Nuclear Science Programme, School of Chemical Sciences and Food Technology, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi (Malaysia)

2014-02-12T23:59:59.000Z

384

Go Abroad in Natural ResourcesNatural Resources  

E-Print Network [OSTI]

Go Abroad in Natural ResourcesNatural Resources Program Contact: Connie Patterson Program.edu/ international The Natural Resources degree is ideally suited for students who wish to study abroad! The sustainable management of natural resources is a fundamental issue, both locally and globally. Scientists

Escher, Christine

385

E-Print Network 3.0 - agricultural residues Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Use in the United States Summary: , livestock commodities, agricultural residues, and bioenergy crops. Drawing on ORNL and APAC county... , developed and maintained at the...

386

E-Print Network 3.0 - automobile shredder residue Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Search Powered by Explorit Topic List Advanced Search Sample search results for: automobile shredder residue Page: << < 1 2 3 4 5 > >> 1 NASHVILLE INCINERATOR PERFORMANCE TESTS...

387

Neutron scattering residual stress measurements on gray cast iron brake discs  

SciTech Connect (OSTI)

Neutron diffraction was used to investigate the effects of a heat treatment designed to remove internal residual stresses in brake discs. It is believed that residual stresses may change the rate of deformation of the discs during severe braking conditions when the disc temperature is increased significantly. Neutron diffraction was used to map out residual strain distributions in a production disc before and after a stress-relieving heat treatment. Results from these neutron diffraction experiments show that some residual strains were reduced by as much as 400 microstrain by stress relieving. 5 refs., 5 figs., 1 tab.

Spooner, S.; Payzant, E.A.; Hubbard, C.R. [and others

1996-11-01T23:59:59.000Z

388

Table 42. Residual Fuel Oil Prices by PAD District and State  

U.S. Energy Information Administration (EIA) Indexed Site

Information AdministrationPetroleum Marketing Annual 1999 203 Table 42. Residual Fuel Oil Prices by PAD District and State (Cents per Gallon Excluding Taxes) - Continued...

389

Table 42. Residual Fuel Oil Prices by PAD District and State  

Gasoline and Diesel Fuel Update (EIA)

Information AdministrationPetroleum Marketing Annual 1998 203 Table 42. Residual Fuel Oil Prices by PAD District and State (Cents per Gallon Excluding Taxes) - Continued...

390

Table 42. Residual Fuel Oil Prices by PAD District and State  

Gasoline and Diesel Fuel Update (EIA)

Information Administration Petroleum Marketing Annual 1995 245 Table 42. Residual Fuel Oil Prices by PAD District and State (Cents per Gallon Excluding Taxes) - Continued...

391

E-Print Network 3.0 - acs residual ischemic Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Search Sample search results for: acs residual ischemic Page: << < 1 2 3 4 5 > >> 1 Brain Research 961 (2003) 2231 www.elsevier.comlocatebrainres Summary: further...

392

E-Print Network 3.0 - acid residues required Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Engineering, Columbia University Collection: Engineering ; Biology and Medicine 13 Protein folding with stochastic L-systems Gemma Danks1 Summary: 70 amino acid residues to 1000s...

393

E-Print Network 3.0 - acid residues determine Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Engineering, Columbia University Collection: Engineering ; Biology and Medicine 14 Protein folding with stochastic L-systems Gemma Danks1 Summary: 70 amino acid residues to 1000s...

394

alters less-conserved residues: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

The macroscopic stress evolution is connected to a length scale of residual liquefaction displayed by microscopic mean-squared displacements. The theory describes this...

395

STEWARDSHIP MAINTAINING NATURAL RICHES  

E-Print Network [OSTI]

;Outstanding Results 5 Energy Conservation: Saved 240 Million KWH over last fifteen years. Green BuildingLAND STEWARDSHIP MAINTAINING NATURAL RICHES TRANSPORTATION GOING THE EXTRA MILE GREEN BUILDING SHOWCASING INNOVATION WATER CONSERVING PRESCIOUS RESOURCES ENERGY MOVING TO A BRIGHTER FUTURE WASTE REDUCING

Ford, James

396

Natural Gas Purchasing Options  

E-Print Network [OSTI]

As a result of economic and regulatory changes, the natural gas marketplace now offers multiple options for purchasers. The purpose of this panel is to discuss short-term purchasing options and how to take advantage of these options both to lower...

Watkins, G.

397

REVISED NATURAL GAS MARKET ASSESSMENT  

E-Print Network [OSTI]

CALIFORNIA ENERGY COMMISSION REVISED NATURAL GAS MARKET ASSESSMENT In Support of the 2007's natural gas market. It covers natural gas demand, supply, infrastructure, price, and possible alternative and the related Scenarios Project, and additional updated information. California natural gas demand growth

398

Nature Conservancy University of Ottawa  

E-Print Network [OSTI]

. Natural Area Conservation Planning. 5. Natural Area Plan for the Frontenac Arch. 6. Management Planning is enough? Less than 10% of Canada's natural lands are in protected status. #12; Conservation of Private. The Conservancy is a non- advocacy, non- confrontational, private lands organization. Natural Area Property

Blouin-Demers, Gabriel

399

warnell school Forestry & Natural Resources  

E-Print Network [OSTI]

#12;#12;warnell school Forestry & Natural Resources 2009 Annual Report o #12;VisionTo be recognized as one of the top five forestry and natural resource programs in the United States. Mission's renewable natural resources; and to place latest ideas and technology in forestry and natural resource

Hall, Daniel

400

POST-OPERATIONAL TREATMENT OF RESIDUAL NA COOLLANT IN EBR-2 USING CARBONATION  

SciTech Connect (OSTI)

At the end of 2002, the Experimental Breeder Reactor Two (EBR-II) facility became a U.S. Resource Conservation and Recovery Act (RCRA) permitted site, and the RCRA permit1 compelled further treatment of the residual sodium in order to convert it into a less reactive chemical form and remove the by-products from the facility, so that a state of RCRA 'closure' for the facility may be achieved (42 U.S.C. 6901-6992k, 2002). In response to this regulatory driver, and in recognition of project budgetary and safety constraints, it was decided to treat the residual sodium in the EBR-II primary and secondary sodium systems using a process known as 'carbonation.' In early EBR-II post-operation documentation, this process is also called 'passivation.' In the carbonation process (Sherman and Henslee, 2005), the system containing residual sodium is flushed with humidified carbon dioxide (CO{sub 2}). The water vapor in the flush gas reacts with residual sodium to form sodium hydroxide (NaOH), and the CO{sub 2} in the flush gas reacts with the newly formed NaOH to make sodium bicarbonate (NaHCO{sub 3}). Hydrogen gas (H{sub 2}) is produced as a by-product. The chemical reactions occur at the exposed surface of the residual sodium. The NaHCO{sub 3} layer that forms is porous, and humidified carbon dioxide can penetrate the NaHCO{sub 3} layer to continue reacting residual sodium underneath. The rate of reaction is controlled by the thickness of the NaHCO{sub 3} surface layer, the moisture input rate, and the residual sodium exposed surface area. At the end of carbonation, approximately 780 liters of residual sodium in the EBR-II primary tank ({approx}70% of original inventory), and just under 190 liters of residual sodium in the EBR-II secondary sodium system ({approx}50% of original inventory), were converted into NaHCO{sub 3}. No bare surfaces of residual sodium remained after treatment, and all remaining residual sodium deposits are covered by a layer of NaHCO{sub 3}. From a safety standpoint, the inventory of residual sodium in these systems was greatly reduced by using the carbonation process. From a regulatory standpoint, the process was not able to achieve deactivation of all residual sodium, and other more aggressive measures will be needed if the remaining residual sodium must also be deactivated to meet the requirements of the existing environmental permit. This chapter provides a project history and technical summary of the carbonation of EBR-II residual sodium. Options for future treatment are also discussed.

Sherman, S.; Knight, C.

2011-03-08T23:59:59.000Z

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

An Integrated Model for Assessment of Sustainable Agricultural Residue Removal Limits for Bioenergy Systems  

SciTech Connect (OSTI)

Agricultural residues have been identified as a significant potential resource for bioenergy production, but serious questions remain about the sustainability of harvesting residues. Agricultural residues play an important role in limiting soil erosion from wind and water and in maintaining soil organic carbon. Because of this, multiple factors must be considered when assessing sustainable residue harvest limits. Validated and accepted modeling tools for assessing these impacts include the Revised Universal Soil Loss Equation Version 2 (RUSLE2), the Wind Erosion Prediction System (WEPS), and the Soil Conditioning Index. Currently, these models do not work together as a single integrated model. Rather, use of these models requires manual interaction and data transfer. As a result, it is currently not feasible to use these computational tools to perform detailed sustainable agricultural residue availability assessments across large spatial domains or to consider a broad range of land management practices. This paper presents an integrated modeling strategy that couples existing datasets with the RUSLE2 water erosion, WEPS wind erosion, and Soil Conditioning Index soil carbon modeling tools to create a single integrated residue removal modeling system. This enables the exploration of the detailed sustainable residue harvest scenarios needed to establish sustainable residue availability. Using this computational tool, an assessment study of residue availability for the state of Iowa was performed. This study included all soil types in the state of Iowa, four representative crop rotation schemes, variable crop yields, three tillage management methods, and five residue removal methods. The key conclusions of this study are that under current management practices and crop yields nearly 26.5 million Mg of agricultural residue are sustainably accessible in the state of Iowa, and that through the adoption of no till practices residue removal could sustainably approach 40 million Mg. However, when considering the economics and logistics of residue harvest, yields below 2.25 Mg ha-1 are generally considered to not be viable for a commercial bioenergy system. Applying this constraint, the total agricultural residue resource available in Iowa under current management practices is 19 million Mg. Previously published results have shown residue availability from 22 million Mg to over 50 million Mg in Iowa.

D. Muth; K. M. Bryden

2003-12-01T23:59:59.000Z

402

The influence of quench sensitivity on residual stresses in the aluminium alloys 7010 and 7075  

SciTech Connect (OSTI)

The most critical stage in the heat treatment of high strength aluminium alloys is the rapid cooling necessary to form a supersaturated solid solution. A disadvantage of quenching is that the thermal gradients can be sufficient to cause inhomogeneous plastic deformation which in turn leads to the development of large residual stresses. Two 215 mm thick rectilinear forgings have been made from 7000 series alloys with widely different quench sensitivity to determine if solute loss in the form of precipitation during quenching can significantly affect residual stress magnitudes. The forgings were heat treated and immersion quenched using cold water to produce large magnitude residual stresses. The through thickness residual stresses were measured by neutron diffraction and incremental deep hole drilling. The distribution of residual stresses was found to be similar for both alloys varying from highly triaxial and tensile in the interior, to a state of biaxial compression in the surface. The 7010 forging exhibited larger tensile stresses in the interior. The microstructural variation from surface to centre for both forgings was determined using optical and transmission electron microscopy. These observations were used to confirm the origin of the hardness variation measured through the forging thickness. When the microstructural changes were accounted for in the through thickness lattice parameter, the residual stresses in the two forgings were found to be very similar. Solute loss in the 7075 forging appeared to have no significant effect on the residual stress magnitudes when compared to 7010. - Highlights: Black-Right-Pointing-Pointer Through thickness residual stress measurements made on large Al alloy forgings. Black-Right-Pointing-Pointer Residual stress characterised using neutron diffraction and deep hole drilling. Black-Right-Pointing-Pointer Biaxial compressive surface and triaxial subsurface residual stresses. Black-Right-Pointing-Pointer Quench sensitivity of 7075 promotes significant microstructural differences to 7010. Black-Right-Pointing-Pointer When precipitation is accounted for, residual stress in both forgings are similar.

Robinson, J.S., E-mail: jeremy.robinson@ul.ie [Materials and Surface Science Institute, University of Limerick (Ireland); Tanner, D.A. [Materials and Surface Science Institute, University of Limerick (Ireland); Truman, C.E. [Department of Mechanical Engineering, University of Bristol (United Kingdom); Paradowska, A.M. [ISIS Facility, Rutherford Appleton Laboratory, Didcot (United Kingdom); Wimpory, R.C. [Helmholtz Centre Berlin for Materials and Energy, Hahn Meitner Platz 1, Berlin (Germany)

2012-03-15T23:59:59.000Z

403

Intermediate Vapor Expansion Distillation and Nested Enrichment Cascade Distillation  

E-Print Network [OSTI]

requiring either compressors or expanders. function of feed composition. The simple column has a single reboiler, single condenser, and is idealized to the extent that column pressure differential and heat exchanger temperature differential are set... Separation Z. Nested Enrichment Cascade For separating liquid mixtures above ambient temperature, both full 'cascade~ and also enrichment cascades have been used. They reduce the heat throughput by about 40% but do not decrease the energy consumption...

Erickson, D. C.

404

DistillationTheory.fm 2 September 1999 Distillation Theory.  

E-Print Network [OSTI]

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 The Energy Balance and the Assumption of Constant Molar flows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Assumption about Constant Molar Flows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Minimum Number of Stages -- Infinite Energy

Skogestad, Sigurd

405

A3.  

U.S. Energy Information Administration (EIA) Indexed Site

A3. RefinerReseller Prices of Distillate and Residual Fuel Oils, by PAD District, 1983-Present Table A3. RefinerReseller Prices of Distillate and Residual Fuel Oils, by PAD...

406

Natural Dark Energy  

E-Print Network [OSTI]

It is now well accepted that both Dark Matter and Dark Energy are required in any successful cosmological model. Although there is ample evidence that both Dark components are necessary, the conventional theories make no prediction for the contributions from each of them. Moreover, there is usually no intrinsic relationship between the two components, and no understanding of the nature of the mysteries of the Dark Sector. Here we suggest that if the Dark Side is so seductive then we should not be restricted to just 2 components. We further suggest that the most natural model has 5 distinct forms of Dark Energy in addition to the usual Dark Matter, each contributing precisely equally to the cosmic energy density budget.

Douglas Scott; Ali Frolop

2007-03-30T23:59:59.000Z

407

Natural gas repowering experience  

SciTech Connect (OSTI)

Gas Research Institute has led a variety of projects in the past two years with respect to repowering with natural gas. These activities, including workshops, technology evaluations, and market assessments, have indicated that a significant opportunity for repowering exists. It is obvious that the electric power industry`s restructuring and the actual implementation of environmental regulations from the Clean Air Act Amendments will have significant impact on repowering with respect to timing and ultimate size of the market. This paper summarizes the results and implications of these activities in repowering with natural gas. It first addresses the size of the potential market and discusses some of the significant issues with respect to this market potential. It then provides a perspective on technical options for repowering which are likely to be competitive in the current environment. Finally, it addresses possible actions by the gas industry and GRI to facilitate development of the repowering market.

Bautista, P.J.; Fay, J.M. [Gas Research Institute, Chicago, IL (United States); Gerber, F.B. [BENTEK Energy Research, DeSoto, TX (United States)

1995-12-31T23:59:59.000Z

408

Nature's Greatest Puzzles  

SciTech Connect (OSTI)

It is a pleasure to be part of the SLAC Summer Institute again, not simply because it is one of the great traditions in our field, but because this is a moment of great promise for particle physics. I look forward to exploring many opportunities with you over the course of our two weeks together. My first task in talking about Nature's Greatest Puzzles, the title of this year's Summer Institute, is to deconstruct the premise a little bit.

Quigg, Chris; /Fermilab

2005-02-01T23:59:59.000Z

409

Chlorophylls - natural solar cells  

E-Print Network [OSTI]

A molecular modeling study was conducted on a series of six natural occurring chlorophylls. Quantum chemistry calculated orbital energies were used to estimate frequency of transitions between occupied molecular orbital and unoccupied molecular orbital energy levels of chlorophyll molecules in vivo conditions in standard (ASTMG173) environmental conditions. Obtained results are in good agreement with energies necessary to fix the Magnesium atom by chlorophyll molecules and with occurrence of chlorophylls in living vegetal organisms.

Jantschi, Lorentz; Balan, Mugur C; Sestras, Radu E

2011-01-01T23:59:59.000Z

410

Recovery of flexible polyurethane foam from shredder residue.  

SciTech Connect (OSTI)

Argonne National Laboratory has developed a patented, continuous process for the recovery of flexible polyurethane foam (PUF) from auto shredder residue (ASR). To test the process, Argonne researchers conceived of, designed, and built a continuous foam washing and drying system that was pilot-tested at a shredder facility for six months. Economic analysis of the process, using manufacturers' quotes and operating data from Argonne's pilot plant, indicates a payback of less than two years for a plant producing about 1,000 ton/yr of foam. Samples of clean foam were shipped to three major foam reprocessors; all three indicated that the quality of the PUF recovered by the Argonne process met their requirements. Tests of the recovered foam by an independent testing laboratory showed that the recycled foam met the specifications for several automotive applications, including carpet padding, headliner, and sound-suppression support materials. Recovery of foam reduces the mass and the volume of material going to the landfill by about 5% and 30%, respectively. Annually, recovery will save about 1.2 x 10{sup 12} Btu of energy, cut the amount of solid waste being landfilled by about 150,000 tons, and eliminate the emission of about 250 tons of volatile organic compounds (VOCs) into the air.

Daniels, E. J.; Jody, b. J.

1999-06-29T23:59:59.000Z

411

Processing Effects for Integrated PZT: Residual Stress, Thickness, and Dielectric Properties  

E-Print Network [OSTI]

Processing Effects for Integrated PZT: Residual Stress, Thickness, and Dielectric Properties Ryan J (PZT) films integrated onto Pt/Ti/SiO2//Si substrates are reported. Sol­gel synthesis and deposition orientation (nominally (111) fiber tex- tured), and measured residual stress. The Stoney method, using laser

Sottos, Nancy R.

412

UPTAKE, ASSIMILATION, AND LOSS OF DDT RESIDUES BY Euphausia pacifica, A EUPHAUSIID SHRIMP  

E-Print Network [OSTI]

UPTAKE, ASSIMILATION, AND LOSS OF DDT RESIDUES BY Euphausia pacifica, A EUPHAUSIID SHRIMP ABSTRACT acquire sufficient DDT residue from its food to account for amounts found in its tissues. Assimilation effii- ciencies for DDT in ingested food are similar to published figures for assimilation of carbon

413

Speciation of Sb in airborne particulate matter, vehicle brake linings, and brake pad wear residues  

E-Print Network [OSTI]

Speciation of Sb in airborne particulate matter, vehicle brake linings, and brake pad wear residues: XAS XANES EXAFS Antimony Particulate matter Brake linings a b s t r a c t Insights into the speciation of Sb in samples of brake linings, brake pad wear residues, road dust, and atmospheric particulate

Short, Daniel

414

Measuring the Residual Ferrite Content of Rapidly Solidified Stainless Steel Alloys-  

E-Print Network [OSTI]

-Gage and ferrite meters have been developed to measure the amount of residual ferrite in duplex stainless steel) ) Measuring the Residual Ferrite Content of Rapidly Solidified Stainless Steel Alloys. Electron beam welds, laser beam welds and rapidly solidified stainless steel alloys have small physical

Eagar, Thomas W.

415

Prediction of catalytic residues in proteins using machine-learning techniques  

E-Print Network [OSTI]

Prediction of catalytic residues in proteins using machine-learning techniques Natalia V. Petrova) and prediction of protein function using various properties of proteins and amino acids (2). Prediction of the functional residues is a challenging and interesting task. The results of such prediction could

416

Prediction of Interface Residues in ProteinProtein Complexes by a Consensus Neural Network Method: Test  

E-Print Network [OSTI]

Prediction of Interface Residues in Protein­Protein Complexes by a Consensus Neural Network Method important information for predicting struc- tures of new protein complexes. This motivated us to develop the PPISP method for predicting inter- face residues in protein­protein complexes. In PPISP, sequence

Weston, Ken

417

Management of high sulfur coal combustion residues, issues and practices: Proceedings  

SciTech Connect (OSTI)

Papers presented at the following sessions are included in this proceedings: (1) overview topic; (2) characterization of coal combustion residues; (3) environmental impacts of residues management; (4) materials handling and utilization, Part I; and (5) materials handling and utilization, Part II. Selected paper have been processed separately for inclusion in the Energy Science and Technology Database.

Chugh, Y.P.; Beasley, G.A. [eds.

1994-10-01T23:59:59.000Z

418

Residual Magnetic Flux Leakage: A Possible Tool for Studying Pipeline Defects  

E-Print Network [OSTI]

Residual Magnetic Flux Leakage: A Possible Tool for Studying Pipeline Defects Vijay Babbar1 weaker flux signals. KEY WORDS: Magnetic flux leakage; residual magnetization; pipeline defects; pipeline pipelines, which may develop defects such as corrosion pits as they age in service.(1) Under the ef- fect

Clapham, Lynann

419

MALATHION RESIDUES IN GREEK HONEY Andreas T. THRASYVOULOU Michael D. IFANTIDIS Nikos L. PAPPAS*  

E-Print Network [OSTI]

-1982 were analyzed for malathion residues. Residues were extracted with acetonitrile/water solution, parti the north, the south, and some Greek islands as well. Reagents Acetonitrile - Nanograde (Mallinckrodt, Inc. Fifty ml of a 10/90 wa- ter/acetonitrile solution was added and the funnel shaken vigorously until

Paris-Sud XI, Université de

420

Pharmacokinetic and residue studies of quinolone compounds and olaquindox in poultry  

E-Print Network [OSTI]

Pharmacokinetic and residue studies of quinolone compounds and olaquindox in poultry A Anadón MR of these quinolones and fluoroquinolones for which clinical experience or experimental informa- tion exists in poultry residues in poultry. This paper presents information about the pharmacokinetic profile of olaquindox

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Justification of RHIC EBIS vacuum system. 1. Requirements to the pressure of residual gas inside the  

E-Print Network [OSTI]

volume, the influx and accumulation of residual gas ions reduces the number of working ions in a trap for internal elements, technology of processing and equipment should be adequate. The components of the gasJustification of RHIC EBIS vacuum system. A. Pikin 1. Requirements to the pressure of residual gas

422

NATURAL RESOURCES ASSESSMENT  

SciTech Connect (OSTI)

The purpose of this report is to summarize the scientific work that was performed to evaluate and assess the occurrence and economic potential of natural resources within the geologic setting of the Yucca Mountain area. The extent of the regional areas of investigation for each commodity differs and those areas are described in more detail in the major subsections of this report. Natural resource assessments have focused on an area defined as the ''conceptual controlled area'' because of the requirements contained in the U.S. Nuclear Regulatory Commission Regulation, 10 CFR Part 60, to define long-term boundaries for potential radionuclide releases. New requirements (proposed 10 CFR Part 63 [Dyer 1999]) have obviated the need for defining such an area. However, for the purposes of this report, the area being discussed, in most cases, is the previously defined ''conceptual controlled area'', now renamed the ''natural resources site study area'' for this report (shown on Figure 1). Resource potential can be difficult to assess because it is dependent upon many factors, including economics (demand, supply, cost), the potential discovery of new uses for resources, or the potential discovery of synthetics to replace natural resource use. The evaluations summarized are based on present-day use and economic potential of the resources. The objective of this report is to summarize the existing reports and information for the Yucca Mountain area on: (1) Metallic mineral and mined energy resources (such as gold, silver, etc., including uranium); (2) Industrial rocks and minerals (such as sand, gravel, building stone, etc.); (3) Hydrocarbons (including oil, natural gas, tar sands, oil shales, and coal); and (4) Geothermal resources. Groundwater is present at the Yucca Mountain site at depths ranging from 500 to 750 m (about 1,600 to 2,500 ft) below the ground surface. Groundwater resources are not discussed in this report, but are planned to be included in the hydrology section of future revisions of the ''Yucca Mountain Site Description'' (CRWMS M&O 2000c).

D.F. Fenster

2000-12-11T23:59:59.000Z

423

Experimental determination of residual stress by neutron diffraction in a boiling water reactor core shroud  

SciTech Connect (OSTI)

Residual strains in a 51 mm (2-inch) thick 304L stainless steel plate have been measured by neutron diffraction and interpreted in terms of residual stress. The plate, measuring (300 mm) in area, was removed from a 6m (20-ft.) diameter unirradiated boiling water reactor core shroud, and included a multiple-pass horizontal weld which joined two of the cylindrical shells which comprise the core shroud. Residual stress mapping was undertaken in the heat affected zone, concentrating on the outside half of the plate thickness. Variations in residual stresses with location appeared consistent with trends expected from finite element calculations, considering that a large fraction of the residual hoop stress was released upon removal of the plate from the core shroud cylinder.

Payzant, A.; Spooner, S.; Zhu, Xiaojing; Hubbard, C.R. [and others

1996-06-01T23:59:59.000Z

424

Neutron diffraction measurements of residual stresses in friction stir welding: a review  

SciTech Connect (OSTI)

Significant amounts of residual stresses are often generated during welding and result in critical degradation of the structural integrity and performance of components. Neutron diffraction has become a well established technique for the determination of residual stresses in welds because of the unique deep penetration, three-dimensional mapping capability, and volume averaged bulk measurements characteristic of the scattering neutron beam. Friction stir welding has gained prominence in recent years. The authors reviewed a number of neutron diffraction measurements of residual stresses in friction stir welds and highlighted examples addressing how the microstructures and residual stresses are correlated with each other. An example of in situ neutron diffraction measurement result shows the evolution of the residual stresses during welding.

Woo, Wan Chuck [ORNL; Feng, Zhili [ORNL; Wang, Xun-Li [ORNL; David, Stan A [ORNL

2011-01-01T23:59:59.000Z

425

Application of neutron diffraction to measure residual strains in high temperature composites  

SciTech Connect (OSTI)

An experimental neutron diffraction technique was used to measure residual thermal strains developed in high temperature composites during postfabrication cooling. Silicon carbide fiber-reinforced titanium aluminide (over the temperature range 20--950{degree}C) and tungsten and saphikon fiber-reinforced nickel aluminide composites (at room temperature) were investigated. As a result of thermal expansion mismatch, compressive residual strains and stresses were generated in the silicon carbide fibers during cooldown. The axial residual strains were tensile in the matrix and were lower in nickel aluminide matrix as compared to those in titanium aluminide matrix. The average transverse residual strains in the matrix were compressive. Liquid-nitrogen dipping and thermal-cycling tend to reduce the fabrication-induced residual strains in silicon carbide fiber-reinforced titanium aluminide matrix composite. However, matrix cracking can occur as a result of these processes. 10 refs., 5 figs., 2 tabs.

Saigal, A. (Tufts Univ., Medford, MA (USA). Dept. of Mechanical Engineering); Kupperman, D.S. (Argonne National Lab., IL (USA))

1991-01-01T23:59:59.000Z

426

Spring Chinook Salmon Interactions Indices and Residual/Precocial Monitoring in the Upper Yakima Basin, 1998 Annual Report.  

SciTech Connect (OSTI)

Select ecological interactions and spring chinook salmon residual/precocial abundance were monitored in 1998 as part of the Yakima/Klickitat Fisheries Project's supplementation monitoring program. Monitoring these variables is part of an effort to help evaluate the factors that contribute to, or limit supplementation success. The ecological interactions that were monitored were prey consumption, competition for food, and competition for space. The abundance of spring chinook salmon life-history forms that have the potential to be influenced by supplementation and that have important ecological and genetic roles were monitored (residuals and precocials). Residual spring chinook salmon do not migrate to the ocean during the normal emigration period and continue to rear in freshwater. Precocials are those salmon that precocially mature in freshwater. The purpose of sampling during 1998 was to collect baseline data one year prior to the release of hatchery spring chinook salmon which occurred during the spring of 1999. All sampling that the authors report on here was conducted in upper Yakima River during summer and fall 1998. The stomach fullness of juvenile spring chinook salmon during the summer and fall averaged 12%. The food competition index suggested that mountain whitefish (0.59), rainbow trout (0.55), and redside shiner (0.55) were competing for food with spring chinook salmon. The space competition index suggested that rainbow trout (0.31) and redside shiner (0.39) were competing for space with spring chinook salmon but mountain whitefish (0.05) were not. Age-0 spring chinook salmon selected a fairly narrow range of microhabitat parameters in the summer and fall relative to what was available. Mean focal depths and velocities for age 0 spring chinook salmon during the summer were 0.5 m {+-} 0.2 m and 0.26 m/s {+-} 0.19 m/s, and during the fall 0.5 m {+-} 0.2 m and 0.24 m/s {+-} 0.18 m/s. Among potential competitors, age 1+ rainbow trout exhibited the greatest degree of microhabitat overlap with spring chinook salmon. Abundance of naturally occurring spring chinook salmon residuals (age 1+ during the summer) was low (< 0.007/m), representing less than 2% of the naturally produced spring chinook salmon (age 0+ and age 1+ during the summer). Abundance of naturally occurring spring chinook salmon that complete their life cycle in freshwater was high relative to anadromous adults. The authors observed an average of 9.5 precocially mature spring chinook salmon on redds with anadromous adults. In addition, 87% of the redds with anadromous adults present also had precocial males attending. All findings in this report should be considered preliminary and subject to further revision as more data and analytical results become available.

James, Brenda B.; Pearsons, Todd N.; McMichael, Geoffrey A. (Washington Department of Fish and Wildlife, Olympia, WA)

1999-12-01T23:59:59.000Z

427

No. 2 Distillate Prices - Residential  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory | NationalJohn CyberNeutronsNewNewsNickNiriConnecticut - - - -

428

Imports of Distillate Fuel Oil  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecember 2005 (Thousand9,0, 1997Environment >7,992000Implications ofU.S.270 300

429

No. 2 Distillate Prices - Industrial  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing ReservoirsYear-Month WeekReserves (Billion Cubic1.878 2.358 - -

430

No. 2 Distillate Prices - Residential  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing ReservoirsYear-Month WeekReserves (Billion Cubic1.878 2.358 -

431

Stocks of Distillate Fuel Oil  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328AdministrationRelease ScheduleU.S. Energy(EIA)

432

Tidal Residual Eddies and their Effect on Water Exchange in Puget Sound  

SciTech Connect (OSTI)

Tidal residual eddies are one of the important hydrodynamic features in tidally dominant estuaries and coastal bays, and they could have significant effects on water exchange in a tidal system. This paper presents a modeling study of tides and tidal residual eddies in Puget Sound, a tidally dominant fjord-like estuary in the Pacific Northwest coast, using a three-dimensional finite-volume coastal ocean model. Mechanisms of vorticity generation and asymmetric distribution patterns around an island/headland were analyzed using the dynamic vorticity transfer approach and numerical experiments. Model results of Puget Sound show that a number of large twin tidal residual eddies exist in the Admiralty Inlet because of the presence of major headlands in the inlet. Simulated residual vorticities near the major headlands indicate that the clockwise tidal residual eddy (negative vorticity) is generally stronger than the anticlockwise eddy (positive vorticity) because of the effect of Coriolis force. The effect of tidal residual eddies on water exchange in Puget Sound and its sub-basins were evaluated by simulations of dye transport. It was found that the strong transverse variability of residual currents in the Admiralty Inlet results in a dominant seaward transport along the eastern shore and a dominant landward transport along the western shore of the Inlet. A similar transport pattern in Hood Canal is caused by the presence of tidal residual eddies near the entrance of the canal. Model results show that tidal residual currents in Whidbey Basin are small in comparison to other sub-basins. A large clockwise residual circulation is formed around Vashon Island near entrance of South Sound, which can potentially constrain the water exchange between the Central Basin and South Sound.

Yang, Zhaoqing; Wang, Taiping

2013-08-30T23:59:59.000Z

433

Artificial nature : water infrastructure and its experience as natural space  

E-Print Network [OSTI]

This work is about water infrastructure and its experience as urban and natural space. It deals with the concepts of nature/geography, technology, and the integral experiential space by analyzing water dams and reservoirs ...

Demirta?, Fatma Asl?han, 1970-

2000-01-01T23:59:59.000Z

434

Natural gas monthly, April 1999  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information. There are two feature articles in this issue: Natural gas 1998: Issues and trends, Executive summary; and Special report: Natural gas 1998: A preliminary summary. 6 figs., 28 tabs.

NONE

1999-05-06T23:59:59.000Z

435

Effects of alternate fuels report No. 8: analysis of degradiation of magnesia-based refractory bricks from a residual oil-fired rotary cement kiln  

SciTech Connect (OSTI)

Residual oil was used as an alternate fuel to natural gas to supply heat in a rotary cement kiln. Principal impurities in the residual oil were Ca, Fe, Mg, Na, Ni, P.S. and V. the kiln operators were concerned about the effects of these oil impurities on observed degradation of the magnesia-based bricks used as a liner in the burning zone of the kiln. Two degraded bricks, which had been in service for six to nine months, were analyzed to determine the role of fuel impurities on the observed degradation. The maximum hot-face temperature of the refractory during service was about 1500/sup 0/C. One brick had decreased in thickness about 45%, the about 15%. Various analytical measurements on these samples failed to reveal the presence of fuel impurities at or near the hot face of the bricks, and therefore it is concluded that the relatively short service life of these refractories was not due to use of residual oil as the fuel in the kiln. The observed degradation, therefore, was attributed to other reactions and to thermal mechanical conditions in the kiln, which inevitably resulted in extensive erosion of the bricks.

Federer, J.I.; Tennery, V.J.

1980-05-01T23:59:59.000Z

436

PCB (polychlorinated biphenyl) residues in transformer carcasses: Final report  

SciTech Connect (OSTI)

This project had three objectives. The first was to assess the population of PCB-containing transformers remaining in service in the US in 1988. While this could not be done with great precision, it appears that the population of oil-filled transformers containing > 50 /mu/g PCB/g oil has decreased by some 15% since 1982 and that the population of askarel-filled transformers has decreased by some 40% in the same time period. This progress could be continued and accelerated if additional reliable and accepted routes for disposal of PCBs contained in transformers would be developed. The second and third objectives of this project have been to examine two simplified approaches to this end. The second objective was to determine if, by draining PCB-containing oil from transformers and refilling with PCB-free oil, a level of PCBs below 50 ppM (/mu/g/g oil) could be reached with assurance. It appears that reclassification of ''PCB-contaminated'' oil-filled transformers (50--500 /mu/g PCB/g oil) of all ratings by draining and refilling could be done routinely. The third objective was to determine the level of residual PCBs left on the metallic surfaces of askarel-filled transformers which, if these units were refilled with PCB-free mineral transformer oil, would have resulted in concentrations of <50 /mu/g PCB/g oil. It appears that cleaning the surfaces of the metallic components, after careful separation and disposal of the liquid and impregnated solid insulations, to a level of 400 /mu/gPCB/100 cm/sup 2/ would result in transformer carcasses of all sizes which would contain less PCBs than would be found were these transformers to have contained oil at the level of 50 /mu/gPCB/g oil. 7 refs., 6 figs., 9 tabs.

Rouse, T.O.; Raymond, C.T.; Fessler, W.A.

1989-08-01T23:59:59.000Z

437

Auto shredder residue recycling: Mechanical separation and pyrolysis  

SciTech Connect (OSTI)

Highlights: Black-Right-Pointing-Pointer In this work, we exploited mechanical separation and pyrolysis to recycle ASR. Black-Right-Pointing-Pointer Pyrolysis of the floating organic fraction is promising in reaching ELV Directive targets. Black-Right-Pointing-Pointer Zeolite catalyst improve pyrolysis oil and gas yield. - Abstract: sets a goal of 85% material recycling from end-of-life vehicles (ELVs) by the end of 2015. The current ELV recycling rate is around 80%, while the remaining waste is called automotive shredder residue (ASR), or car fluff. In Europe, this is mainly landfilled because it is extremely heterogeneous and often polluted with car fluids. Despite technical difficulties, in the coming years it will be necessary to recover materials from car fluff in order to meet the ELV Directive requirement. This study deals with ASR pretreatment and pyrolysis, and aims to determine whether the ELV material recycling target may be achieved by car fluff mechanical separation followed by pyrolysis with a bench scale reactor. Results show that flotation followed by pyrolysis of the light, organic fraction may be a suitable ASR recycling technique if the oil can be further refined and used as a chemical. Moreover, metals are liberated during thermal cracking and can be easily separated from the pyrolysis char, amounting to roughly 5% in mass. Lastly, pyrolysis can be a good starting point from a 'waste-to-chemicals' perspective, but further research should be done with a focus on oil and gas refining, in order both to make products suitable for the chemical industry and to render the whole recycling process economically feasible.

Santini, Alessandro [Department of Industrial Chemistry and Materials, University of Bologna, Viale Risorgimento 4, I-40136 Bologna (Italy); Passarini, Fabrizio, E-mail: fabrizio.passarini@unibo.it [Department of Industrial Chemistry and Materials, University of Bologna, Viale Risorgimento 4, I-40136 Bologna (Italy); Vassura, Ivano [Department of Industrial Chemistry and Materials, University of Bologna, Viale Risorgimento 4, I-40136 Bologna (Italy); Serrano, David; Dufour, Javier [Department of Chemical and Energy Technology, ESCET, Universidad Rey Juan Carlos, c/Tulipan s/n, 28933 Mostoles, Madrid (Spain); Instituto IMDEA Energy, c/Tulipan s/n, 28933 Mostoles, Madrid (Spain); Morselli, Luciano [Department of Industrial Chemistry and Materials, University of Bologna, Viale Risorgimento 4, I-40136 Bologna (Italy)

2012-05-15T23:59:59.000Z

438

Wisconsin Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30NaturalThousandExtensions (Billion2008 2009 2010from2009 201060 5.56 5.28

439

Wyoming Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30NaturalThousandExtensions (Billion2008Sep-14 Oct-14Year (Million20082009 2010

440

Wyoming Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30NaturalThousandExtensions (Billion2008Sep-14 Oct-14Year (Million20082009

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Wyoming Natural Gas Summary  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProved Reserves (Billion Cubic Feet)Wyoming (Million Cubic Feet) Wyoming Natural3.40

442

NETL: Natural Gas Resources  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challengeMultiscaleLogos NERSCJeffreyKey Actions forEnergy SystemsNatural

443

Iowa Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 14 15 0 0 0Year

444

Kansas Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 14 15 0 0ExtensionsYear

445

Kansas Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 14 15 0 0ExtensionsYearSep-14 Oct-14 Nov-14

446

Kentucky Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 14 15Industrial Consumers2009 2010 2011 2012

447

Kentucky Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 14 15Industrial Consumers2009 2010 2011

448

Louisiana Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 14343 342 3289 0 0FuelFuel2,208,9202009 2010

449

Louisiana Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 14343 342 3289 0 0FuelFuel2,208,9202009

450

Maine Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 14343 342CubicSep-14 Oct-14

451

Maryland Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 14343Decade Year-0Thousand Cubic Feet)2009

452

Maryland Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 14343Decade Year-0Thousand Cubic

453

Massachusetts Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 14343Decade81 170Feet) (Millionper8.36

454

Michigan Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 04 19 15 15 15 3Year Jan Feb2008 2009 20102009

455

Michigan Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 04 19 15 15 15 3Year Jan Feb2008 2009

456

Minnesota Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 04 19 15 15Thousand Cubic Feet) Decade5.68

457

Mississippi Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 04 19 15Year Jan Feb (Million2008 2009 20102009

458

Mississippi Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 04 19 15Year Jan Feb (Million2008 2009

459

Missouri Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 04 19 15YearThousand Cubic Feet) Decade2009

460

Missouri Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 04 19 15YearThousand Cubic Feet)

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Montana Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 04 19343 369 384Fuel ConsumptionThousand

462

Montana Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 04 19343 369 384Fuel ConsumptionThousand5.02

463

Colorado Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 633 622 56623 46 (Million Cubic2009 2010 2011 2012

464

Colorado Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 633 622 56623 46 (Million Cubic2009 2010 2011

465

Connecticut Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 633 622 56623 4623 42 (Million Cubic5.51 4.62 4.78

466

Delaware Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 633 622 56623 4623 42Year (Million CubicThousand6.92

467

Florida Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 1 0 0 0 1979-2013Fuel2009 2010 2011 2012 2013

468

Florida Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 1 0 0 0 1979-2013Fuel2009 2010 2011 2012

469

Georgia Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 1 0 058.5 57.1 54.8IndustrialThousand

470

Hawaii Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 1 0 058.588,219Thousand Cubic Feet)

471

Historical Natural Gas Annual  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 1 0Decade Year-0 Year-1 Year-2Thousand6 The

472

Historical Natural Gas Annual  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 1 0Decade Year-0 Year-1 Year-2Thousand6 The7

473

Historical Natural Gas Annual  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 1 0Decade Year-0 Year-1 Year-2Thousand6 The78

474

Idaho Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 1 0Decade (Million Cubic Feet)

475

Illinois Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 1 0DecadeWithdrawals (MillionPlant2009 2010

476

Illinois Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 1 0DecadeWithdrawals (MillionPlant2009

477

Illinois Natural Gas Summary  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 1 0DecadeWithdrawalsDecade Year-0 Year-1Prices

478

Indiana Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 14 15 0 0 0 0WithdrawalsPlant

479

Indiana Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 14 15 0 0 0 0WithdrawalsPlantSep-14 Oct-14

480

Production of Substitute Natural Gas from Coal  

SciTech Connect (OSTI)

The goal of this research program was to develop and demonstrate a novel gasification technology to produce substitute natural gas (SNG) from coal. The technology relies on a continuous sequential processing method that differs substantially from the historic methanation or hydro-gasification processing technologies. The thermo-chemistry relies on all the same reactions, but the processing sequences are different. The proposed concept is appropriate for western sub-bituminous coals, which tend to be composed of about half fixed carbon and about half volatile matter (dry ash-free basis). In the most general terms the process requires four steps (1) separating the fixed carbon from the volatile matter (pyrolysis); (2) converting the volatile fraction into syngas (reforming); (3) reacting the syngas with heated carbon to make methane-rich fuel gas (methanation and hydro-gasification); and (4) generating process heat by combusting residual char (combustion). A key feature of this technology is that no oxygen plant is needed for char combustion.

Andrew Lucero

2009-01-31T23:59:59.000Z

Note: This page contains sample records for the topic "natural distillate residual" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Natural ventilation generates building form  

E-Print Network [OSTI]

Natural ventilation is an efficient design strategy for thermal comfort in hot and humid climates. The building forms can generate different pressures and temperatures to induce natural ventilation. This thesis develops a ...

Chen, Shaw-Bing

1996-01-01T23:59:59.000Z

482

Natural Gas Exports from Iran  

Reports and Publications (EIA)

This assessment of the natural gas sector in Iran, with a focus on Iran’s natural gas exports, was prepared pursuant to section 505 (a) of the Iran Threat Reduction and Syria Human Rights Act of 2012 (Public Law No: 112-158). As requested, it includes: (1) an assessment of exports of natural gas from Iran; (2) an identification of the countries that purchase the most natural gas from Iran; (3) an assessment of alternative supplies of natural gas available to those countries; (4) an assessment of the impact a reduction in exports of natural gas from Iran would have on global natural gas supplies and the price of natural gas, especially in countries identified under number (2); and (5) such other information as the Administrator considers appropriate.

2012-01-01T23:59:59.000Z

483

U.S. Residual Fuel Oil Refiner Sales Volumes  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S. NaturalA. Michael SchaalNovember 26,8,CoalThousand Cubic Feet)3.070

484

Residual Fuel Oil Sales to End Users Refiner Sales Volumes  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2007 10,998 9,933 10,998 10,643 10,998throughThousand CubicWashington Natural GasResidential

485

Natural gas monthly, June 1997  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information. 6 figs., 24 tabs.

NONE

1997-06-01T23:59:59.000Z

486

Natural gas monthly, November 1993  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground state data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information.

Not Available

1993-11-29T23:59:59.000Z

487

Natural Resource Management Plan Update  

E-Print Network [OSTI]

wood industry, some farming in area of Solar Farm 3 #12;History of Natural Resource Management Formal

Homes, Christopher C.

488

Natural gas monthly: December 1993  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. Articles are included which are designed to assist readers in using and interpreting natural gas information.

Not Available

1993-12-01T23:59:59.000Z

489

Natural gas monthly, June 1999  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information. 6 figs., 25 tabs.

NONE

1999-06-01T23:59:59.000Z

490

Natural gas monthly, July 1998  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information. 6 figs., 25 tabs.

NONE

1998-07-01T23:59:59.000Z

491

Natural gas monthly, April 1995  

SciTech Connect (OSTI)

The Natural Gas Monthly highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information. 6 figs., 31 tabs.

NONE

1995-04-27T23:59:59.000Z

492

Natural gas monthly, October 1998  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information. 6 figs., 27 tabs.

NONE

1998-10-01T23:59:59.000Z

493

Natural Gas Monthly, March 1996  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information.

NONE

1996-03-25T23:59:59.000Z

494

Natural gas monthly, June 1998  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information. 6 figs., 27 tabs.

NONE

1998-06-01T23:59:59.000Z

495

Natural gas monthly, May 1999  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time the NGM features articles designed to assist readers in using and interpreting natural gas information. 6 figs., 27 tabs.

NONE

1999-05-01T23:59:59.000Z

496

Effects of weld residual stresses on crack-opening area analysis of pipes for LBB applications  

SciTech Connect (OSTI)

This paper summarizes four different studies undertaken to evaluate the effects of weld residual stresses on the crack-opening behavior of a circumferential through-wall crack in the center of a girth weld. The effect of weld residual stress on the crack-opening-area and leak-rate analyses of a pipe is not well understood. There are no simple analyses to account for these effects, and, therefore, they are frequently neglected. The four studies involved the following efforts: (1) Full-field thermoplastic finite element residual stress analyses of a crack in the center of a girth weld, (2) A comparison of the crack-opening displacements from a full-field thermoplastic residual stress analysis with a crack-face pressure elastic stress analysis to determine the residual stress effects on the crack-opening displacement, (3) The effects of hydrostatic testing on the residual stresses and the resulting crack-opening displacement, and (4) The effect of residual stresses on crack-opening displacement with different normal operating stresses.

Dong, P.; Rahman, S.; Wilkowski, G. [and others

1997-04-01T23:59:59.000Z

497

Sustainable Agricultural Residue Removal for Bioenergy: A Spatially Comprehensive National Assessment  

SciTech Connect (OSTI)

This study provides a spatially comprehensive assessment of sustainable agricultural residue removal potential across the United States. Earlier assessments determining the quantity of agricultural residue that could be sustainably removed for bioenergy production at the regional and national scale faced a number of computational limitations. These limitations included the number of environmental factors, the number of land management scenarios, and the spatial fidelity and spatial extent of the assessment. This study utilizes integrated multi-factor environmental process modeling and high fidelity land use datasets to perform a spatially comprehensive assessment of sustainably removable agricultural residues across the conterminous United States. Soil type represents the base spatial unit for this study and is modeled using a national soil survey database at the 10 – 100 m scale. Current crop rotation practices are identified by processing land cover data available from the USDA National Agricultural Statistics Service Cropland Data Layer database. Land management and residue removal scenarios are identified for each unique crop rotation and crop management zone. Estimates of county averages and state totals of sustainably available agricultural residues are provided. The results of the assessment show that in 2011 over 150 million metric tons of agricultural residues could have been sustainably removed across the United States. Projecting crop yields and land management practices to 2030, the assessment determines that over 207 million metric tons of agricultural residues will be able to be sustainably removed for bioenergy production at that time.

D. Muth, Jr.; K. M. Bryden; R. G. Nelson

2013-02-01T23:59:59.000Z

498

wind engineering & natural disaster mitigation  

E-Print Network [OSTI]

wind engineering & natural disaster mitigation #12;wind engineering & natural disaster mitigation Investment WindEEE Dome at Advanced Manufacturing Park $31million Insurance Research Lab for Better Homes $8million Advanced Facility for Avian Research $9million #12;wind engineering & natural disaster mitigation

Denham, Graham

499

LIQUEFIED NATURAL GAS IN CALIFORNIA  

E-Print Network [OSTI]

CALIFORNIA ENERGY COMMISSION LIQUEFIED NATURAL GAS IN CALIFORNIA: HISTORY, RISKS, AND SITING Tyler Contributors Dave Maul Manager NATURAL GAS & SPECIAL PROJECTS OFFICE Terrence O'Brien, Deputy Commissioner and Leader of the Governor's Natural Gas Working Group #12;This paper was prepared as the result

500

warnell school Forestry & Natural Resources  

E-Print Network [OSTI]

warnell school Forestry & Natural Resources 2010 Annual Report o #12;VisionTo be recognized as one of the top five forestry and natural resource programs in the United States. MissionTo prepare resources; and to place latest ideas and technology in forestry and natural resource management into real

Hall, Daniel