National Library of Energy BETA

Sample records for national fenestration rating

  1. Rating fenestration for energy efficiency

    SciTech Connect (OSTI)

    Markway, R.

    1993-09-01

    The grading of windows and doors by the National Fenestration Rating Council (NFRC) opens a new era regarding the energy efficiency of fenestration products. For the first time, architects, designers, and other specifiers will find themselves on a level playing field when it comes to comparing the thermal performance of fenestration products. Although only one state, California, now requires the use of fenestration products that have gone through the NFRC's simulation and testing procedures, five other states will soon be doing so, including Washington, Alaska, Oregon, Idaho, and Wisconsin. Others will follow suit; Florida, Arizona, Texas, Louisiana, New York, Massachusetts, and Colorado have shown interest. Exactly what does this mean to architects The NFRC, which was established last year, has developed a procedure to determine accurately the U-value of fenestration products. Under the NFRC program a number of independent simulation and testing laboratories have been approved. These laboratories are charged with the responsibility of determining whether products conform to the U-values represented by the manufacturers. The rating procedure and benefits from it are described.

  2. Fenestration Attachments

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    new windows for residential and commercial buildings. Attachments Energy Rating Council (AERC), National Fenestration Rating Council (NFRC), window coverings manufacturers, ...

  3. Certification and Rating of Attachments for Fenestration Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (DE-FOA-0001000) | Department of Energy Certification and Rating of Attachments for Fenestration Technologies (DE-FOA-0001000) Certification and Rating of Attachments for Fenestration Technologies (DE-FOA-0001000) November 5, 2013 - 4:43pm Addthis This funding opportunity is closed Through this Funding Opportunity Announcement (FOA) the Building Technologies Office (BTO) seeks to establish a performance rating mechanism for assessing the energy performance of fenestration attachments. DOE

  4. Rating the performance of fenestration systems

    SciTech Connect (OSTI)

    Arasteh, D.K.; Beck, F.A. . Windows and Daylighting Group); duPont, W.C.; Mathis, R.C. )

    1994-08-01

    During the 1980s, a wide variety of new, energy efficient fenestration systems (windows, skylights, doors, etc.) emerged on the market. However, while the products' energy efficiency had increased significantly, little effort was made to standardize the procedures used to determine and report the products' thermal performance properties. Specifiers relied heavily on manufacturers' data. These data were often determined using different procedures, often specified different properties, and some times sounded to good to be true. In addition, code officials could not accurately or efficiently implement state energy codes, so they began mandating rating procedures that often differed from state to state and sometimes within a state. NFRC's mission is to create rating procedures for thermal properties, not to set maximum or minimum property values for specific applications. Other groups -- such as ASHRAE, other code agencies or state governments -- set standards that specify minimum property requirements. Many such standards already require that fenestration thermal properties be determined using NFRC procedures. This article briefly explains NFRC's procedures for determining window heat transfer indices, discusses NFRC's efforts to validate its technical procedures, and explains how specifiers can use the NFRC rating system.

  5. Whole house fenestration energy consumption as a function of variable window air leakage rates

    SciTech Connect (OSTI)

    Kehrli, D.

    1995-09-01

    Residential building energy consumption is dependent on many variables. The heat loss or gain attributable to fenestration products can be a significant portion of the whole building load. The fenestration industry is current developing and implementing new test methods and rating procedures to more accurately account for fenestration energy transfer. One of the tools being developed by the National Fenestration Rating Council (NFRC) is a PC-based program called Residential Fenestration (RESFEN) heating and cooling load use and costs. This paper will provide a review of the energy and cost impacts that variable air leakage rates of several types of window products can have on overall window energy usage as modeled in four typical building designs located in the US. The analysis was performed with the RESFEN software as part of an NFRC sensitivity study on this issue.

  6. NFRC efforts to develop a residential fenestration annual energy rating methodology

    SciTech Connect (OSTI)

    Crooks, B.; Larsen, J.; Sullivan, R.; Arasteh, D.; Selkowitz, S.

    1995-01-01

    This paper documents efforts currently being undertaken by the National Fenestration Rating Council`s Annual Energy Rating Subcommittee to develop procedures to quantify the energy impacts of fenestration products in typical residential buildings throughout the US. Parallel paths focus on (1) the development of simplified heating and cooling indices and (2) the development of a more detailed methodology to calculate the cost and energy impacts of specific products in a variety of housing types. These procedures are currently under discussion by NFRC`s Technical Committee; future efforts will also address commercial buildings.

  7. An assessment of interlaboratory reproducibility in fenestration energy ratings

    SciTech Connect (OSTI)

    Wise, D.J.; Shah, B.V.

    2000-07-01

    This paper presents the results from the 1998 Interlaboratory Comparison Round Robin Testing. The fenestration thermal performance ratings (U-factors) were determined in accordance with NFRC 100 (1997), Procedures for Determining Fenestration Product U-factors and NFRC Test Procedure for Measuring the Steady-State Thermal Transmittance of Fenestration Systems (April 1997). A total of nine NFRC-accredited testing laboratories participated in the 1998 test round, and this paper presents the results. The round robin involved thermal performance tests on an aluminum-clad wood fixed window with high-performance glazing. Each participating laboratory received the same window product, which was shipped via common freight carrier. Each laboratory was directed to keep all test results confidential. The testing began in May and was completed in December of 1998. The results of each thermal test were reviewed and placed in a spreadsheet for analysis and data comparison. The expected results, or the relative position of data of any participating laboratory, as not divulged until all testing and data analysis was complete. Specific data regarding various measured and calculated performance values as required by the NFRC procedures and program documents are presented in this paper.

  8. Fenestration Software Tools

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    integrated shading systems and window attachments and coverings NFRC - National Fenestration ... is 2 quads (commercial and residential) and an additional 0.17 quad for ...

  9. Fenestration System Performance Research, Testing, and Evaluation

    SciTech Connect (OSTI)

    Jim Benney

    2009-11-30

    The US DOE was and is instrumental to NFRC's beginning and its continued success. The 2005 to 2009 funding enables NFRC to continue expanding and create new, improved ratings procedures. Research funded by the US DOE enables increased fenestration energy rating accuracy. International harmonization efforts supported by the US DOE allow the US to be the global leader in fenestration energy ratings. Many other governments are working with the NFRC to share its experience and knowledge toward development of their own national fenestration rating process similar to the NFRC's. The broad and diverse membership composition of NFRC allows anyone with a fenestration interest to come forward with an idea or improvement to the entire fenestration community for consideration. The NFRC looks forward to the next several years of growth while remaining the nation's resource for fair, accurate, and credible fenestration product energy ratings. NFRC continues to improve its rating system by considering new research, methodologies, and expanding to include new fenestration products. Currently, NFRC is working towards attachment energy ratings. Attachments are blinds, shades, awnings, and overhangs. Attachments may enable a building to achieve significant energy savings. An NFRC rating will enable fair competition, a basis for code references, and a new ENERGY STAR product category. NFRC also is developing rating methods to consider non specular glazing such as fritted glass. Commercial applications frequently use fritted glazing, but no rating method exists. NFRC is testing new software that may enable this new rating and contribute further to energy conservation. Around the world, many nations are seeking new energy conservation methods and NFRC is poised to harmonize its rating system assisting these nations to better manage and conserve energy in buildings by using NFRC rated and labeled fenestration products. As this report has shown, much more work needs to be done to

  10. Advanced Facades, Daylighting, and Complex Fenestration Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Facades, Daylighting, and Complex Fenestration Systems Advanced Facades, Daylighting, and Complex Fenestration Systems Emerging Technologies Project for the 2013 Building ...

  11. Fenestration research grant

    SciTech Connect (OSTI)

    McCluney, R.

    1990-07-20

    Fenestration systems have numerous impacts upon the performances of buildings, including view, illumination, thermal gains and losses, and energy performance. These impacts can be positive or negative. Excellent energy savings and occupant satisfaction and productivity, and poor energy performance can result from bad design. The definition of proper fenestration design is not an easy one, since there are so many variables involved and because of the growing variability of fenestration products available. The vendors of these products make performance claims aimed at a variety of performance goals, but the list of issues addressed is seldom complete and comprehensive. Better characterization of the instantaneous energy and other performances of fenestration products is an important first step in increasing the designer's ability to create viable, cost-effective, and energy efficient designs. Next would be improved methods for calculating long-term performances. Finally we need better design tools that will incorporate new knowledge about fenestration performances in ways that enable designers rather than disable them. This report covers work done from the beginning of work on this grant late in 1984 to its end on 30 March 1990. 22 refs., 5 figs.

  12. Advanced Facades, Daylighting, and Complex Fenestration Systems |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Facades, Daylighting, and Complex Fenestration Systems Advanced Facades, Daylighting, and Complex Fenestration Systems Emerging Technologies Project for the 2013 Building Technologies Office's Program Peer Review emrgtech21_lee_040413.pdf (1.5 MB) More Documents & Publications Window Daylighting Demo High Performance Window Attachments Fenestration Software Tools

  13. Energy reduction implications with fenestration

    SciTech Connect (OSTI)

    Johnson, R.; Arasteh, D.; Selkowitz, S.

    1985-03-01

    In this paper the authors discuss results from a number of parametric analyses of the energy and cost influences of fenestration in a prototypical office building. The energy important parameters of fenestration, daylighting, and electric lighting were systematically varied in several climates using the DOE-2.1 energy simulation program to determine net annual results. Results are presented for two climate extremes; one heating-load dominated and the other cooling-load dominated. The increase or decrease of net annual energy consumption and peak electrical demand due to fenestration is demonstrated. Daylighting is shown to be the single most important strategy to reduce energy use, but can be an energy and cost liability. Conditions under which these liabilities occur are discussed, and optimal design solutions for minimizing energy costs are suggested. 3 refs., 4 figs.

  14. Residential fenestration performance analysis using RESFEN3.1

    SciTech Connect (OSTI)

    Huang, Y.J.; Mitchell, R.; Arasteh, D.; Selkowitz, S.

    1999-02-01

    This paper describes the development efforts of RESFEN3.1, a PC-based computer program for calculating the heating and cooling energy performance and cost of residential fenestration systems. The development of RESFEN has been coordinated with ongoing efforts by the National Fenestration Rating Council (NFRC) to develop an energy rating system for windows and slqdights to maintain maximum consistency between RESFEN and NFRC's planned energy rating system. Unlike previous versions of RESFEN, that used regression equations to replicate a large database of computer simulations, Version 3.1 produces results based on actual hour-by-hour simulations. This approach has been facilitated by the exponential increase in the speed of personal computers in recent years. RESFEN3.1 has the capability of analyzing the energy performance of windows in new residential buildings in 52 North American locations. The user describes the physical, thermal and optical properties of the windows in each orientation, solar heat gain reductions due to obstructions, overhangs, or shades; and the location of the house. The RESFEN program then models a prototypical house for that location and calculates the energy use of the house using the DOE-2 program. The user can vary the HVAC system, foundation type, and utility costs. Results are presented for the annual heating and cooling energy use, energy cost, and peak energy demand of the house, and the incremental energy use or peak demand attributable to the windows in each orientation. This paper describes the capabilities of RESFEN3.1, its usefulness in analyzing the energy performance of residential windows and its development effort and gives insight into the structure of the computer program. It also discusses the rationale and benefits of the approach taken in RESFEN in combining a simple-to-use graphical front-end with a detailed hour-by-hour ''simulation engine'' to produce an energy analysis tool for the general public that is user

  15. Improving information technology to maximize fenestration energyefficiency

    SciTech Connect (OSTI)

    Arasteh, Dariush; Mitchell, Robin; Kohler, Christian; Huizenga,Charlie; Curcija, Dragan

    2001-06-06

    Improving software for the analysis of fenestration product energy efficiency and developing related information technology products that aid in optimizing the use of fenestration products for energy efficiency are essential steps toward ensuring that more efficient products are developed and that existing and emerging products are utilized in the applications where they will produce the greatest energy savings. Given the diversity of building types and designs and the climates in the U.S., no one fenestration product or set of properties is optimal for all applications. Future tools and procedures to analyze fenestration product energy efficiency will need to both accurately analyze fenestration product performance under a specific set of conditions and to look at whole fenestration product energy performance over the course of a yearly cycle and in the context of whole buildings. Several steps have already been taken toward creating fenestration product software that will provide the information necessary to determine which details of a fenestration product's design can be improved to have the greatest impact on energy efficiency, what effects changes in fenestration product design will have on the comfort parameters that are important to consumers, and how specific fenestration product designs will perform in specific applications. Much work remains to be done, but the energy savings potential justifies the effort. Information is relatively cheap compared to manufacturing. Information technology has already been responsible for many improvements in the global economy--it can similarly facilitate many improvements in fenestration product energy efficiency.

  16. Final Report - National Database of Utility Rates and Rate Structure...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    National Database of Utility Rates and Rate Structure Final Report - National Database of Utility Rates and Rate Structure Awardee: Illinois State University Location: Normal, IL ...

  17. National Utility Rate Database: Preprint

    SciTech Connect (OSTI)

    Ong, S.; McKeel, R.

    2012-08-01

    When modeling solar energy technologies and other distributed energy systems, using high-quality expansive electricity rates is essential. The National Renewable Energy Laboratory (NREL) developed a utility rate platform for entering, storing, updating, and accessing a large collection of utility rates from around the United States. This utility rate platform lives on the Open Energy Information (OpenEI) website, OpenEI.org, allowing the data to be programmatically accessed from a web browser, using an application programming interface (API). The semantic-based utility rate platform currently has record of 1,885 utility rates and covers over 85% of the electricity consumption in the United States.

  18. Advanced fenestration systems for improved daylight performance

    SciTech Connect (OSTI)

    Lee, E S; Selkowitz, S

    1998-03-01

    The use of daylight to replace or supplement electric lighting in commercial buildings can result in significant energy and demand savings. High performance fenestration systems area necessary, but not sufficient, element of any successful daylighting design that reduces lighting energy use. However, these savings may be reduced if the fenestration systems impose adverse thermal loads. In this paper, we review the state of the art of several advanced fenestration systems which are designed to maximize the energy-saving potential of daylighting, while improving comfort and visual performance at an "affordable" cost. We first review the key performance issues that successful fenestration systems must address, and then review several classes of fenestration systems intended to meet those performance needs. The systems are reviewed in two categories: static and dynamic. Static systems include not only glazings, such as spectrally-selective and holographic glazings, but specialized designs of light-shelves and light-pipes, while dynamic systems cover automatically-operated Venetian blinds and electrochromic glazings. We include a discussion of the research directions in this area, and how these efforts might lead to static and dynamic hardware and system solutions that fulfill the multiple roles that these systems must play in terms of energy efficiency, comfort, visual performance, health, and amenity in future buildings.

  19. Measurement of fenestration performance under realistic conditions

    SciTech Connect (OSTI)

    Klems, J.H.

    1984-02-01

    The need for fenestration performance measurements under realistic conditions is noted, and the Mobile Window Thermal Test facility (MoWiTT), newly constructed at LBL to make these measurements, is described. A key feature of the MoWiTT is the direct measurement of instantaneous net energy flow in the presence of sunlight. Ongoing calibration to establish the accuracy of this facility is described, and calibration data so far obtained are presented. Estimates from these data indicate that the facility will have sufficient accuracy for most fenestration measurements of interest.

  20. A characterization of the nonresidential fenestration market

    SciTech Connect (OSTI)

    Shehabi, Arman; Eley, Charles; Arasteh, Dariush; Degens, Phil

    2002-07-25

    The purpose of this report is to characterize the nonresidential fenestration market in order to better understand market barriers to, and opportunities for, energy-efficient fenestration products. In particular, the goal is to: (1) Better understand how glazing products flow between industry groups. (2) Identify major decision makers directing the product flow. (3) Understand industry trends for certain technologies or products. (4) Characterize the role of energy codes and standards in influencing industry trends. (5) Assess the impact of product testing and certification programs on the industry. The U.S. glass industry is a $27 billion enterprise with both large producers and small firms playing pivotal roles in the industry. While most sectors of the glass industry have restructured and consolidated in the past 20 years, the industry still employs 150,000 workers. Nonresidential glazing accounts for approximately 18% of overall U.S. glass production. In 1999, nonresidential glazing was supplied to approximately 2.2 billion ft{sup 2} of new construction and additions. That same year, nonresidential glazing was also supplied to approximately 1.1 billion ft{sup 2} of remodeling construction. With an industry this large and complex, it is to be expected that many market participants can influence fenestration selection. If market barriers to the selection of high performance fenestration products are better understood, then the U. S. Department of Energy (USDOE), the Northwest Energy Efficiency Alliance (NEEA), and others can develop programs and policies that promote greater energy efficiency in commercial glazing products.

  1. Guidelines for modeling projecting fenestration products

    SciTech Connect (OSTI)

    Arasteh, D.K.; Finlayson, E.; Curcija, D.; Baker, J.; Huizenga, C.

    1998-10-01

    Heat transfer patterns in projecting fenestration products (greenhouse windows, skylights, etc.) are different from those in typical planar window products. The projecting surfaces often radiate to each other, thereby invalidating the commonly used assumption that fenestration product interior surfaces radiate to a uniform room air temperature. The convective portion of the surface heat transfer coefficient also is significantly different from the one used with planar geometries and is even more dependent on geometry and location. Projecting fenestration product profiles must, therefore, be modeled in their entirety. This paper presents the results of complete cross-sectional, variable film coefficient, two-dimensional heat transfer modeling of two greenhouse windows using the next generation of window-specific heat transfer modeling tools. The use of variable film coefficient models is shown to increase the accuracy with which simulation tools can compute U-factors. Simulated U-factors also are determined using conventional constant film coefficient algorithms. The results from both sets of simulations are compared with measured values.

  2. Solar-optical properties of multilayer fenestration systems

    SciTech Connect (OSTI)

    Papamichael, K.; Winkelmann, F.

    1986-11-01

    The bidirectional solar-optical properties of a fenestration system are necessary to accurately determine its luminous and thermal performance. Bidirectional transmittance and reflectance can be determined experimentally for fenestration systems of arbitrary complexity using a scanning radiometer, after which the total directional absorptance can be calculated. However, for the case of multilayer fenestration systems, this approach does not provide information about the net absorptance of each layer. Moreover, the same layers can be ordered in more than one way, resulting in fenestration systems with different solar-optical properties, the determination which requires additional experimental procedures. This paper describes a mathematical model for the calculation of the bidirectional solar-optical properties of multi-layer fenestration systems, using the bidirectional solar-optical properties of each layer. The model is based on the representation of the bidirectional solar-optical properties using matrices. Matrix operations are then used to calculate the bidirectional solar-optical properties of any combination of layers, considering the interreflections between them. This approach offers two advantages: (1) the reduction of the experimental procedures to those required for the determination of the bidirectional transmittance and reflectance of fenestration layers, rather than complete fenestration systems, and (2) the determination of the net absorptance of each layer as part of the fenestration system, rather than the total absorptance of the complete fenestration system. 7 refs., 4 figs., 1 tab.

  3. High Performance Commercial Fenestration Framing Systems

    SciTech Connect (OSTI)

    Mike Manteghi; Sneh Kumar; Joshua Early; Bhaskar Adusumalli

    2010-01-31

    A major objective of the U.S. Department of Energy is to have a zero energy commercial building by the year 2025. Windows have a major influence on the energy performance of the building envelope as they control over 55% of building energy load, and represent one important area where technologies can be developed to save energy. Aluminum framing systems are used in over 80% of commercial fenestration products (i.e. windows, curtain walls, store fronts, etc.). Aluminum framing systems are often required in commercial buildings because of their inherent good structural properties and long service life, which is required from commercial and architectural frames. At the same time, they are lightweight and durable, requiring very little maintenance, and offer design flexibility. An additional benefit of aluminum framing systems is their relatively low cost and easy manufacturability. Aluminum, being an easily recyclable material, also offers sustainable features. However, from energy efficiency point of view, aluminum frames have lower thermal performance due to the very high thermal conductivity of aluminum. Fenestration systems constructed of aluminum alloys therefore have lower performance in terms of being effective barrier to energy transfer (heat loss or gain). Despite the lower energy performance, aluminum is the choice material for commercial framing systems and dominates the commercial/architectural fenestration market because of the reasons mentioned above. In addition, there is no other cost effective and energy efficient replacement material available to take place of aluminum in the commercial/architectural market. Hence it is imperative to improve the performance of aluminum framing system to improve the energy performance of commercial fenestration system and in turn reduce the energy consumption of commercial building and achieve zero energy building by 2025. The objective of this project was to develop high performance, energy efficient commercial

  4. WINDOW 4. 0: Program description. A PC program for analyzing the thermal performance of fenestration products

    SciTech Connect (OSTI)

    Not Available

    1992-03-01

    WINDOW 4.0 is a publicly available IBM PC compatible computer program developed by the Windows and Daylighting Group at Lawrence Berkeley Laboratory for calculating total window thermal performance indices (e.g. U-values, solar heat gain coefficients, shading coefficients, and visible transmittances). WINDOW 4.0 provides a versatile heat transfer analysis method consistent with the rating procedure developed by the National Fenestration Rating Council (NFRC). The program can be used to design and develop new products, to rate and compare performance characteristics of all types of window products, to assist educators in teaching heat transfer through windows, and to help public officials in developing building energy codes. WINDOW 4.0 is a major revision to WINDOW 3.1 and we strongly urge all users to read this manual before using the program. Users who need professional assistance with the WINDOW 4.0 program or other window performance simulation issues are encouraged to contact one or more of the NFRC-accredited Simulation Laboratories. A list of these accredited simulation professionals is available from the NFRC.

  5. Final Report- National Database of Utility Rates and Rate Structure

    Broader source: Energy.gov [DOE]

    One of the key informational barriers for consumers, installers, regulators and policymakers, is the proper comparison cost of utility-supplied electricity that will be replaced with a Photovoltaic (PV) system. Oftentimes, these comparisons are made with national or statewide averages which results in inaccurate comparisons and conclusions. Illinois State University seeks to meet the need for accurate information about electricity costs and rate structure by building a national database of utility rates and rate structures. The database will build upon the excellent framework that was developed by the OpenEI.org initiative and extend it in several important ways. First, the data will be populated and monitored by a team of trained regulatory economists. Second, the database will be more comprehensive because it will be populated with data from newer competitive retail suppliers for states that have restructured their electricity markets to allow such suppliers. Third, the University and its Institute for Regulatory Policy Studies will maintain the database and ensure that it contains the most recent rate information.

  6. Thermal performance of complex fenestration systems

    SciTech Connect (OSTI)

    Carpenter, S.C.; Elmahdy, A.H.

    1994-12-31

    The thermal performance (i.e., U-factor) of four complex fenestration systems is examined using computer simulation tools and guarded hot box testing. The systems include a flat glazed skylight, a domed or bubble skylight, a greenhouse window, and a curtain wall. The extra care required in performing simulation and testing of these complex products is described. There was good agreement (within 10%) between test and simulation for two of the four products. The agreement was slightly poorer (maximum difference of 16%) for the two high-heat-transfer products: the domed skylight and the greenhouse window. Possible causes for the larger discrepancy in these projecting window products are uncertainties in the inside and outside film coefficients and lower warm-side air temperatures because of stagnant airflow.

  7. How fenestration can significantly affect energy use in commercial buildings

    SciTech Connect (OSTI)

    Johnson, R.; Selkowitz, S.; Sullivan, R.

    1984-04-01

    This paper reports conclusions of an extensive series of computer analyses of annual energy use and electrical peak demand in two climates as functions of fenestration parameters. Particular attention is paid to daylighting and its associated energy tradeoffs. The study includes the effects of climate, orientation, glazing area, U-value, shading coefficient, visible transmittance, lighting power density, and lighting control strategy. The extensive set of parametric analyses generated in this study suggest that for a simple office module, fenestration can provide annual net energy savings in all climates if daylighting is used. Control of solar gain is critical to realization of energy benefits from daylighting. Fenestration and daylighting design strategies that reduce net annual energy consumption can also reduce peak electrical demand. The optimum combination of fenestration variables is a function of climate, orientation, and electric lighting power density.

  8. Robot-Assisted Antegrade In-Situ Fenestrated Stent Grafting

    SciTech Connect (OSTI)

    Riga, Celia V. Bicknell, Colin D.; Wallace, Daniel; Hamady, Mohamad; Cheshire, Nicholas

    2009-05-15

    To determine the technical feasibility of a novel approach of in-situ fenestration of aortic stent grafts by using a remotely controlled robotic steerable catheter system in the porcine model. A 65-kg pig underwent robot-assisted bilateral antegrade in-situ renal fenestration of an abdominal aortic stent graft with subsequent successful deployment of a bare metal stent into the right renal artery. A 16-mm iliac extension covered stent served as the porcine aortic endograft. Under fluoroscopic guidance, the graft was punctured with a 20-G customized diathermy needle that was introduced and kept in place by the robotic arm. The needle was exchanged for a 4 x 20 mm cutting balloon before successful deployment of the renal stent. Robot-assisted antegrade in-situ fenestration is technically feasible in a large mammalian model. The robotic system enables precise manipulation, stable positioning, and minimum instrumentation of the aorta and its branches while minimizing radiation exposure.

  9. WINDOW 4.0: Program description. A PC program for analyzing the thermal performance of fenestration products

    SciTech Connect (OSTI)

    Not Available

    1992-03-01

    WINDOW 4.0 is a publicly available IBM PC compatible computer program developed by the Windows and Daylighting Group at Lawrence Berkeley Laboratory for calculating total window thermal performance indices (e.g. U-values, solar heat gain coefficients, shading coefficients, and visible transmittances). WINDOW 4.0 provides a versatile heat transfer analysis method consistent with the rating procedure developed by the National Fenestration Rating Council (NFRC). The program can be used to design and develop new products, to rate and compare performance characteristics of all types of window products, to assist educators in teaching heat transfer through windows, and to help public officials in developing building energy codes. WINDOW 4.0 is a major revision to WINDOW 3.1 and we strongly urge all users to read this manual before using the program. Users who need professional assistance with the WINDOW 4.0 program or other window performance simulation issues are encouraged to contact one or more of the NFRC-accredited Simulation Laboratories. A list of these accredited simulation professionals is available from the NFRC.

  10. WINDOW-WALL INTERFACE CORRECTION FACTORS: THERMAL MODELING OF INTEGRATED FENESTRATION AND OPAQUE ENVELOPE SYSTEMS FOR IMPROVED PREDICTION OF ENERGY USE

    SciTech Connect (OSTI)

    Bhandari, Mahabir S; Ravi, Dr. Srinivasan

    2012-01-01

    The boundary conditions for thermal modeling of fenestration systems assume an adiabatic condition between the fenestration system installed and the opaque envelope system. This theoretical adiabatic boundary condition may not be appropriate owing to heat transfer at the interfaces, particularly for aluminum- framed windows affixed to metal- framed walls. In such scenarios, the heat transfer at the interface may increase the discrepancy between real world thermal indices and laboratory measured or calculated indices based on NFRC Rating System.This paper discusses the development of window-wall Interface Correction Factors (ICF) to improve energy impacts of building envelope systems

  11. Evaluating Fenestration Products for Zero-Energy Buildings: Issuesfor Discussion

    SciTech Connect (OSTI)

    Arasteh, Dariush; Curcija, Charlie; Huang, Joe; Huizenga,Charlie; Kohler, Christian

    2006-07-25

    Computer modeling to determine fenestration product energy properties (U-factor, SHGC, VT) has emerged as the most cost-effective and accurate means to quantify them. Fenestration product simulation tools have been effective in increasing the use of low-e coatings and gas fills in insulating glass and in the widespread use of insulating frame designs and materials. However, for more efficient fenestration products (low heat loss products, dynamic products, products with non-specular optical characteristics, light re-directing products) to achieve widespread use, fenestration modeling software needs to be improved. This paper addresses the following questions: (1) Are the current properties (U, SHGC, VT) calculated sufficient to compare and distinguish between windows suitable for Zero Energy Buildings and conventional window products? If not, what data on the thermal and optical performance, on comfort, and on peak demand of windows is needed. (2) Are the algorithms in the tools sufficient to model the thermal and optical processes? Are specific heat transfer and optical effects not accounted for? Is the existing level of accuracy enough to distinguish between products designed for Zero Energy Buildings? Is the current input data adequate?

  12. Reaction Rate Measurements at the National Criticality Experiments...

    Office of Scientific and Technical Information (OSTI)

    Title: Reaction Rate Measurements at the National Criticality Experiments Research Center Authors: Bredeweg, Todd Allen 1 ; Bounds, John Alan 1 ; Brooks, George Henry Jr. 1 ; ...

  13. Realization rates of the National Energy Audit

    SciTech Connect (OSTI)

    Berry, L.G.; Gettings, M.B.

    1998-11-01

    Engineering estimates of savings resulting from installation of energy conservation measures in homes are often greater than the savings actually realized. A brief review of prior studies of realization rates prefaces this study of rates from an engineering audit tool, NEAT, (developed for the Department of Energy`s Low-Income Weatherization Assistance Program) used in a New York state utility`s low-income program. Estimates of metered and predicted savings are compared for 49 homes taken from a data base of homes that participated in the first year of the utility`s program. Average realization rates ranging from 57% to 69% result, depending on the data quality. Detailed examinations of two houses using an alternate engineering method, the DOE-2 computer program (considered an industry standard), seem to indicate that the low realization rates mainly result from factors other than inaccuracies in the audit`s internal algorithms. Causes of the low realization rates are examined, showing that the strongest single factor linked to the low rates in this study is the use of secondary heating fuels that supplement the primary heating fuel. This study, like the other similar studies, concludes that engineering estimates are valuable tools in determining ranked lists of cost-effective weatherization measures, but may not be accurate substitutes for measured results in evaluating program performance.

  14. Certification and Rating of Attachments for Fenestration Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The underlying data will assist architects and engineers in better understanding the energy impact of particular products. The awardee will develop performance verification, and ...

  15. Certification and Rating of Attachments for Fenestration Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... publicly available through an electronic database and website. 8 Approach Key Issues: * ... Distinctive Characteristics: * Public-private collaborative effort. * Bring together ...

  16. Choices in the design of weathering tests for fenestration systems

    SciTech Connect (OSTI)

    Masters, L.W.; Scott, J.L.; Bond, L.F.

    1995-12-31

    Manufactured products, such as fenestration systems and the materials comprising the systems, are often observed to degrade due to exposure to the elements of weather. While standard and nonstandard methods have been developed to provide a means of assessing the effect of weathering, questions often arise concerning the relationship of resultant test data with actual in-service performance. In view of the questions concerning the relevance of test data and the rapidly growing focus on quality assurance, there is strong interest in developing improved test protocols. This paper focuses on the key choices that must be made in the design of weathering tests and includes identification of the currently available methods used for weathering of fenestration systems and the primary shortcomings of those methods.

  17. Fenestration systems as luminaries of varying candlepower distribution

    SciTech Connect (OSTI)

    Papamichael, K.

    1990-10-01

    Simulation of the performance of electric lighting systems has been successfully handled using computers, since electric lighting systems have a constant luminous output with respect to intensity and spatial distribution, usually referred to as candlepower distribution, which can be measured and used conveniently. This paper describes an approach of treating fenestration systems as luminaries of varying candlepower distribution, so that the determination of their luminous performance becomes consistent with that of electric lighting systems. The transmitted distribution through fenestration systems due to radiation from the sun, sky and ground is determined from their bidirectional transmittance and the luminance distribution of the sources of radiation. The approach is demonstrated using the experimentally determined bidirectional transmittance of a diffusive sample under the uniform, overcast and clear sky luminance distributions. 6 refs., 14 figs.

  18. A large scanning radiometer for characterizing fenestration systems

    SciTech Connect (OSTI)

    Papamichael, K.; Klems, J.; Selkowitz, S.

    1987-11-01

    A large scanning radiometer for measuring the bidirectional transmittance and reflectance of fenestration systems and components is described. Examples of measured data obtained for simple non-specular samples using the radiometer are presented. A method of obtaining the overall bidirectional properties of systems by calculation from scanning radiometer measurements of components is suggested. Advantages and limitations of the method are discussed. The method appears promising.

  19. Determines the Thermal and Optical Properties of Fenestration Systems

    Energy Science and Technology Software Center (OSTI)

    1995-01-27

    WINDOW4.1 computes the thermal properties of windows and other fenestration elements used in typical residential and commercial buildings. Manufactures, specifiers, architects, consumers, and the energy code specialists all need to know these properties (U-values, Solar Heat Gain Coefficients, optical properties). The use of this program to calculate these properties is typically much more cost effective than laboratory test procedures. Properties of complete window systems are based on libraries (or user input) component data.

  20. Fenestration Software Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Image: Lawrence Berkeley National Laboratory 6 of 6 Radiance imaging of patterns of transmitted light -- Left: false color left. Right: gray scale. Image: Lawrence Berkeley ...

  1. Improving computer simulations of heat transfer for projecting fenestration products: Using radiation view-factor models

    SciTech Connect (OSTI)

    Griffith, B.; Tuerler, D.; Arasteh, D.K.; Curcija, D.

    1998-10-01

    The window well formed by the concave surface on the warm side of skylights and garden windows can cause surface heat-flow rates to be different for these projecting types of fenestration products than for normal planar windows. Current methods of simulating fenestration thermal conductance (U-factor) use constant boundary condition values for overall surface heat transfer. Simulations that account for local variations in surface heat transfer rates (radiation and convection) may be more accurate for rating and labeling window products whose surfaces project outside a building envelope. This paper, which presents simulation and experimental results for one projecting geometry, is the first step in documenting the importance of these local effects. A generic specimen, called the foam garden window, was used in simulations and experiments to investigate heat transfer of projecting surfaces. Experiments focused on a vertical cross section (measurement plane) located at the middle of the window well on the warm side of the specimen. The specimen was placed between laboratory thermal chambers that were operated at American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) winter heating design conditions. Infrared thermography was used to map surface temperatures. Air temperature and velocity were mapped throughout the measurement plane using a mechanical traversing system. Finite-element computer simulations that directly modeled element-to-element radiation were better able to match experimental data than simulations that used fixed coefficients for total surface heat transfer. Air conditions observed in the window well suggest that localized convective effects were the reason for the difference between actual and modeled surface temperatures. U-value simulation results were 5% to 10% lower when radiation was modeled directly.

  2. Approach for evaluating the thermal comfort effects of nonresidential building fenestration systems

    SciTech Connect (OSTI)

    Sullivan, R.; Arasteh, D.; Papamichael, K.; Selkowitz, S.

    1988-03-01

    This paper documents an approach for evaluating the comfort impacts associated with varying fenestration system parameters primarily under the influence of direct solar radiation. The authors present a method of evaluation in which it was shown that an annual comfort index could be determined by knowing the fenestration system solar heat gain coefficient and aperture size.

  3. Control of solar radiation in buildings: a selected bibliography. [Over 70 references on fenestration design

    SciTech Connect (OSTI)

    Harmon, R.B.

    1982-01-01

    Fenestration design synthesizes many factors, including solar radiation control, daylight illumination, direct and reflected glare, the view out of the building, services, and the structure and fabric of the building in terms of energy conservation and costs. This bibliography includes books and articles related to these aspects of fenestration design in various types of structures.

  4. Determination and application of bidirectional solar-optical properties of fenestration systems

    SciTech Connect (OSTI)

    Papamichael, K.; Klems, J.; Selkowitz, S.

    1988-03-01

    Accurate determination of the luminous and thermal performance of fenestration systems that incorporate optically complex components requires detailed knowledge of their radiant behavior. We describe a large scanning radiometer used to measure the bidirectional transmittance and reflectance of fenestration systems and components. We present examples of measured data obtained for simple non-specular samples. We describe a method of obtaining the overall properties of fenestration systems by calculation from scanning radiometer measurements of fenestration components. Finally, we describe the application of bidirectional solar-optical properties of fenestration systems to determine their luminous and thermal performance with respect to building energy consumption and occupants' comfort. We also discuss the advantages and limitations of the method, which appears to be promising.

  5. Convective heat transfer correlations for fenestration glazing cavities: A review

    SciTech Connect (OSTI)

    Zhao, Y.; Curcija, D.; Goss, W.P.

    1999-07-01

    Convective heat transfer in insulated glazing unit (IGU) cavities is a major component of the overall heat transfer in fenestration systems. Accurately quantifying the heat-transfer coefficient within the cavity is of great significance in calculating the center-of-glass U factor, the edge-of-glass U factor, and therefore the overall U factor. Over the past 40 years, along with the rapid development of experimental techniques and numerical methods as well as the powerful computer systems, the heat-transfer correlations have been updated either from experimental data or from numerical data from time to time. The literature reviewed here covers correlations based on simplified analytical studies, on the experimental data, and on the numerical results. In addition, most of the correlation equations cover the typical design range of fenestration glazing cavities, e.g., Ra < 20,000. Inconsistencies and discrepancies existing between different experimental observations, and between derived numerical/analytical correlations and available experimental data, are discussed.

  6. Two-dimensional forced convection perpendicular to the outdoor fenestration surface--FEM solution

    SciTech Connect (OSTI)

    Curcija, D.; Goss, W.P.

    1995-08-01

    Two-dimensional laminar forced convection on an outdoor fenestration surface, with the wind perpendicular to the glazing surface, was analyzed using the penalty function approach finite-element method (FEM). The air far from the fenestration surface (free-stream conditions) was assumed to be at ASHRAE standard fenestration conditions of {minus}18 C (0 F) and 6.7 m/s (15 mph). A prototype fenestration configuration of a typical wood casement window, consisting of a double-step frame and an insulating glazing unit (IGU), was used in defining the outdoor fenestration profile. A flat-plate geometry was also considered for purposes of comparison with other available numerical and experimental results and for validation of the results for the actual fenestration profile. The results are reported in the form of velocity vector plots and local convective surface heat transfer coefficients. Recommendations on the local outdoor surface convective heat transfer coefficient for use in two- and three-dimensional heat transfer analyses of fenestration systems are presented.

  7. Obstacles to the use of exterior fenestration and daylighting control systems in the US

    SciTech Connect (OSTI)

    Sweitzer, G.; Johnson, R.

    1984-03-01

    Exterior fenestration and daylighting control systems can provide excellent control of solar gain and glare and still be visually satisfying elements in the design of building envelopes. However, US building industry experience with exterior fenestration and daylighting control systems suggests that durability and proper function of these systems is often unsatisfactory. Yet in Western Europe, exterior systems are a proven, cost-effective, and aesthetically accepted fenestration design element. It is suggested that these contrasting operating experiences reflect differences in prevailing US/Western European approaches to building design, construction, and operation. Three representative US building case studies are examined, each describing the application of exterior fenestration/daylighting control components previously untested as a system, and some unsatisfactory consequences. Several changes that may assist in increasing the acceptance and success of these systems in the US building industry are suggested.

  8. A comparison between calculated and measured SHGC for complex fenestration systems

    SciTech Connect (OSTI)

    Klems, J.H.; Warner, J.L.; Kelley, G.O.

    1995-09-01

    Calorimetric measurements of dynamic net heat flow through a complex fenestration system consisting of a buff venetian blind inside clear double glazing are used to derive the direction-dependent beam SHGC (solar heat gain coefficient) of the fenestration. The data are compared with calculations according to a proposed general method for deriving complex fenestration system SHGC`s from bidirectional layer optical properties and generic calorimetric properties. Previously published optical data for the same venetian blind and generic inward-flowing fraction measurements are used in the calculation. Satisfactory agreement is found between SHGC measurements and calculation. Significant dependence on incident angle was found in the measured SHGC`s. Profile angle was not found to be a useful variable in characterizing the system performance. Predicted SHGC was found to be inherently dependent on two angles, although only the incident angle variations were observable under test conditions.

  9. Nuclear Weapons Dismantlement Rate Up 146 Percent | National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nuclear Weapons Dismantlement Rate Up 146 Percent October 01, 2007 WASHINGTON, D.C. -- The United States significantly increased its rate of dismantled nuclear weapons during ...

  10. Modelling Complex Fenestration Systems using physical and virtual models

    SciTech Connect (OSTI)

    Thanachareonkit, Anothai; Scartezzini, Jean-Louis

    2010-04-15

    Physical or virtual models are commonly used to visualize the conceptual ideas of architects, lighting designers and researchers; they are also employed to assess the daylighting performance of buildings, particularly in cases where Complex Fenestration Systems (CFS) are considered. Recent studies have however revealed a general tendency of physical models to over-estimate this performance, compared to those of real buildings; these discrepancies can be attributed to several reasons. In order to identify the main error sources, a series of comparisons in-between a real building (a single office room within a test module) and the corresponding physical and virtual models was undertaken. The physical model was placed in outdoor conditions, which were strictly identical to those of the real building, as well as underneath a scanning sky simulator. The virtual model simulations were carried out by way of the Radiance program using the GenSky function; an alternative evaluation method, named Partial Daylight Factor method (PDF method), was also employed with the physical model together with sky luminance distributions acquired by a digital sky scanner during the monitoring of the real building. The overall daylighting performance of physical and virtual models were assessed and compared. The causes of discrepancies between the daylighting performance of the real building and the models were analysed. The main identified sources of errors are the reproduction of building details, the CFS modelling and the mocking-up of the geometrical and photometrical properties. To study the impact of these errors on daylighting performance assessment, computer simulation models created using the Radiance program were also used to carry out a sensitivity analysis of modelling errors. The study of the models showed that large discrepancies can occur in daylighting performance assessment. In case of improper mocking-up of the glazing for instance, relative divergences of 25-40% can be

  11. COMFEN 3.0 - Evolution of an Early Design Tool for Commercial Facades and Fenestration Systems

    SciTech Connect (OSTI)

    McClintock Facade Consulting LLC, Walnut Creek, CA; McQuillen Interactive LLC, Santa Cruz, CA; Selkowitz, Stephen; Mitchell, Robin; McClintock, Maurya; McQuillen, Daniel; McNeil, Andrew; Yazdanian, Mehry

    2011-03-09

    Achieving a net-zero energy building cannot be done solely by improving the efficiency of the engineering systems. It also requires consideration of the essential nature of the building including factors such as architectural form, massing, orientation and enclosure. Making informed decisions about the fundamental character of a building requires assessment of the effects of the complex interaction of these factors on the resulting performance of the building. The complexity of these interactions necessitates the use of modeling and simulation tools to dynamically analyze the effects of the relationships, yet decisions about the building fundamentals are often made in the earliest stages of design, before a `building? exists to model. To address these issues, Lawrence Berkeley National Laboratory (LBNL) has developed an early-design energy modeling tool (COMFEN) specifically to help make informed decisions about building facade fundamentals by considering the design of the building envelope, orientation and massing on building performance. COMFEN focuses on the concept of a ?space? or ?room? and uses the EnergyPlus, and RadianceTM engines and a simple, graphic user interface to allow the user to explore the effects of changing key early-design input variables on energy consumption, peak energy demand, and thermal and visual comfort. Comparative results are rapidly presented in a variety of graphic and tabular formats to help users move toward optimal facade and fenestration design choices.While COMFEN 1.0 utilized an ExcelTM-based user interface, COMFEN 3.0 has been reworked to include a simple, more intuitive, yet powerful Graphic User Interface (GUI), a broader range of libraries for associated system and component choices and deliver a wider range of graphic outputs and options. This paper (and presentation) outlines the objectives in developing and further refining COMFEN, the mechanics of the program, and plans for future development.

  12. Percutaneous fenestration of aortic dissection: Salvage of an ischemic solitary left kidney

    SciTech Connect (OSTI)

    Park, Jae Hyung; Chung, Jin Wook; Cho, Yoon Koo; Kim, Sun Ho; Ahn, Hyuk; Oh, Byung Hee

    1997-03-15

    The false channel of a type III aortic dissection caused acute renal ischemia by compression of the origin of the left renal artery in a patient with status post-right nephrectomy. To relieve the ischemia and restore renal function, percutaneous balloon fenestration was performed successfully.

  13. An indices approach for evaluating the performance of fenestration systems in nonresidential buildings

    SciTech Connect (OSTI)

    Sullivan, R.; Arasteh, D.; Papamichael, K.; Kim, J.J.; Johnson, R.; Selkowitz, S.; McCluney, R.

    1987-11-01

    We present results from the first phase of a project to develop a fenestration performance design tool to be used by builders, designers, architects, utility auditors, etc. In phase 1 we defined the design tool concept and the experimental and analytical methodologies required to achieve the project goal. We defined five fenestration performance indices, which when combined with user- specified weighting factors yield a single figure of merit. Three of the indices are related to the effects of fenestration on building energy performance: fuel and electric use and peak electric demand. The other two are related to thermal and visual comfort. We derived index values and correlations to window design parameters by creating a data base consisting of a large number of building energy simulations for a prototypical office building module using the DOE-2 computer simulation program. Four glazing types and two shading devices were combined in several ways so that a representative sampling of realistic fenestration systems was analyzed. 9 refs., 10 figs.

  14. Fenestration performance analysis using an interactive graphics-based methodology on a microcomputer

    SciTech Connect (OSTI)

    Sullivan, R.; Selkowitz, S.

    1989-09-01

    We show the development and implementation of a new methodology that can be used to evaluate the energy and comfort performance of fenestration in non-residential buildings. The methodology is based on the definition of a fenestration system figure of merit.'' The figure of merit'' is determined by considering five non-dimensional performance indices representing heating energy, cooling energy, cooling energy peak, thermal comfort, and visual comfort. These indices were derived by performing a regression analysis of several thousand hour-by-hour building heat transfer simulations of a prototypical office building module using the DOE-2 simulation program. The regression analysis resulted in a series of simplified algebraic expressions that related fenestration configuration variables to performance parameters. We implemented these equations in a hypermedia'' environment -- one that integrates graphics, sound, animation, and calculation sequences --and created a prototype fenestration performance design tool. Inputs required by the program consist of geographic location, building type, perimeter space, and envelope definition. Outputs are the calculated performance indices for electricity and fuel use, peak electric load, and thermal and visual comfort. 6 refs., 7 figs.

  15. Access Rate Control System | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Access Rate Control System Access Rate Control System The mp4 video format is not supported by this browser. Download video Captions: On Time: 4:03 min Developed to support safeguards and security, the Access Rate Control System (ARCS) controls the speed of entry through full-height turnstiles

  16. Linking home energy rating systems with energy efficiency financing: Progress on national and state programs

    SciTech Connect (OSTI)

    Farhar, B.C.; Collins, N.E.; Walsh, R.W.

    1996-10-01

    In 1991 and early 1992, the U.S. Department of Energy (DOE), in cooperation with the U.S. Department of Housing and Urban Development (HUD), established a National Collaborative on Home Energy Rating Systems (HERS) and Energy Efficient Mortgages (EEMs). The Collaborative's purpose was to involve stakeholders at a national policy level to develop a plan leading the nation toward a voluntary system linking HERS with EEMs. The National Renewable Energy Laboratory (NREL) coordinated the National Collaborative's meetings for DOE. Composed of representatives from 25 stakeholder organizations, the Collaborative, after some 14 meetings, reached consensus on two documents, both published by NREL in mg 1992: A National Program for Energy-Efficient Mortgages and Home Energy Rating Systems: A Blueprint for Action and Going National with HERS and EEMs: Issues and Impacts, The Collected Papers of the National Collaborative.

  17. A new method for predicting the solar heat gain of complex fenestration systems

    SciTech Connect (OSTI)

    Klems, J.H.; Warner, J.L.; Kelley, G.O.

    1995-03-01

    A new method of predicting the solar heat gain through complex fenestration systems involving nonspecular layers such as shades or blinds has been examined in a project jointly sponsored by ASHRAE and DOE. In this method, a scanning radiometer is used to measure the bidirectional radiative transmittance and reflectance of each layer of a fenestration system. The properties of systems containing these layers are then built up computationally from the measured layer properties using a transmission/multiple-reflection calculation. The calculation produces the total directional-hemispherical transmittance of the fenestration system and the layer-by-layer absorbances. These properties are in turn combined with layer-specific measurements of the inward-flowing fractions of absorbed solar energy to produce the overall solar heat gain coefficient. The method has been applied to one of the most optically complex systems in common use, a venetian blind in combination with multiple glazings. A comparison between the scanner-based calculation method and direct system calorimetric measurements made on the LBL MoWiTT facility showed good agreement, and is a significant validation of the method accuracy and feasibility.

  18. Simulating the daylight performance of fenestration systems and spaces of arbitrary complexity: The IDC method. Revision

    SciTech Connect (OSTI)

    Papamichael, K.; Beltran, L.

    1993-04-01

    A new method to simulate the daylight performance of fenestration systems and spaces is presented. This new method, named IDC (Integration of Directional Coefficients), allows the simulation of the daylight performance of fenestration systems and spaces of arbitrary complexity, under any sun, sky and ground conditions. The IDC method is based on the combination of scale model photometry and computer-based simulation. Physical scale models are used to experimentally determine a comprehensive set of {open_quotes}directional illuminance coefficients{close_quotes} at reference points of interest, which are then used in analytical, computer-based routines, to determine daylight factors or actual daylight illuminance values under any sun, sky and ground conditions. The main advantage of the IDC method is its applicability to any optically complex environment. Moreover, the computer-based analytical routines are fast enough to allow for hourly simulation of the daylight performance over the course of an entire year. However, the method requires appropriate experimental facilities for the determination of the Directional Coefficients. The IDC method has been implemented and used successfully in inter-validation procedures with various daylight simulation computer programs. Currently, it is used to simulate the daylight performance of fenestration systems that incorporate optically complex components, such as Venetian blinds, optically treated light shelves and light pipes.

  19. A new method for predicting the solar heat gain of complex fenestration systems

    SciTech Connect (OSTI)

    Klems, J.H.; Warner, J.L.

    1992-10-01

    A new method of predicting the solar heat gain through complex fenestration systems involving nonspecular layers such as shades or blinds has been examined in a project jointly sponsored by ASHRAE and DOE. In this method, a scanning radiometer is used to measure the bidirectional radiative transmittance and reflectance of each layer of a fenestration system. The properties of systems containing these layers are then built up computationally from the measured layer properties using a transmission/multiple-reflection calculation. The calculation produces the total directional-hemispherical transmittance of the fenestration system and the layer-by-layer absorptances. These properties are in turn combined with layer-specific measurements of the inward-flowing fractions of absorbed solar energy to produce the overall solar heat gain coefficient. This method has been used to determine the solar heat gain coefficient of a double-glazed window with an interior white shade. The resulting solar heat gain coefficient was compared to a direct measurement of the same system using the Mobile Window Thermal Test (MoWiTT) Facility for measuring window energy performance, and the two results agreed. This represents the first in a series of planned validations and applications of the new method.

  20. Simulating the daylight performance of fenestration systems and spaces of arbitrary complexity: The IDC method

    SciTech Connect (OSTI)

    Papamichael, K.; Beltran, L.

    1993-04-01

    A new method to simulate the daylight performance of fenestration systems and spaces is presented. This new method, named IDC (Integration of Directional Coefficients), allows the simulation of the daylight performance of fenestration systems and spaces of arbitrary complexity, under any sun, sky and ground conditions. The IDC method is based on the combination of scale model photometry and computer-based simulation. Physical scale models are used to experimentally determine a comprehensive set of ``directional illuminance coefficients`` at reference points of interest, which are then used in analytical, computer-based routines, to determine daylight factors or actual daylight illuminance values under any sun, sky and ground conditions. The main advantage of the IDC method is its applicability to any optically complex environment. Moreover, the computer-based analytical routines are fast enough to allow for hourly simulation of the daylight performance over the course of an entire year. However, the method requires appropriate experimental facilities for the determination of the Directional Coefficients. The IDC method has been implemented and used successfully in inter-validation procedures with various daylight simulation computer programs. Currently, it is used to simulate the daylight performance of fenestration systems that incorporate optically comp1ex components, such as Venetian blinds, optically treated light shelves and light pipes.

  1. Energy-efficient mortgages and home energy rating systems: A report on the nation`s progress

    SciTech Connect (OSTI)

    Farhar, B.C.; Eckert, J.

    1993-09-01

    This report summarizes progress throughout the nation in establishing voluntary programs linking home energy rating systems (HERS) and energy-efficient mortgages (EEMs). These programs use methods for rating the energy efficiency of new and existing homes and predicting energy cost savings so lenders can factor in energy cost savings when underwriting mortgages. The programs also encourage lenders to finance cost-effective energy-efficiency improvements to existing homes with low-interest mortgages or other instruments. The money saved on utility bills over the long term can more than offset the cost of such energy-efficiency improvements. The National Collaborative on HERS and EEMs recommended that this report be prepared.

  2. A description of the new ASTM test method E 1424, used for measuring fenestration air leakage at differential temperatures and pressures

    SciTech Connect (OSTI)

    Kehrli, D.W.

    1995-09-01

    A new committee has been developed by ASTM Committee E6 for measuring air leakage rates of fenestration products under imposed conditions of differential pressures and temperatures. This new method is different from the long-standing, internationally referenced ASTM Method E 283 in that it is performed under temperature differentials across the test specimen similar to ASTM C 236 and C 1199, and AAMA 1503-88. This new method will show the impacts of expansion and contraction, shrinkage, compression-set, fabrication and design integrity, and material and component interactions in the air leakage rates of window and doors products. This paper compares the two methods and provides some typical test data.

  3. Simulating the Daylight Performance of Complex Fenestration Systems Using Bidirectional Scattering Distribution Functions within Radiance

    SciTech Connect (OSTI)

    Ward, Gregory; Mistrick, Ph.D., Richard; Lee, Eleanor; McNeil, Andrew; Jonsson, Ph.D., Jacob

    2011-01-21

    We describe two methods which rely on bidirectional scattering distribution functions (BSDFs) to model the daylighting performance of complex fenestration systems (CFS), enabling greater flexibility and accuracy in evaluating arbitrary assemblies of glazing, shading, and other optically-complex coplanar window systems. Two tools within Radiance enable a) efficient annual performance evaluations of CFS, and b) accurate renderings of CFS despite the loss of spatial resolution associated with low-resolution BSDF datasets for inhomogeneous systems. Validation, accuracy, and limitations of the methods are discussed.

  4. Attachments Energy Ratings Council | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachments Energy Ratings Council Attachments Energy Ratings Council Attachments Energy Ratings Council Lead Performer: Window Covering Manufacturing Association - New York, NY DOE Funding: $1,600,000 Project Term: October 1, 2014 - September 30, 2018 Funding Opportunity Announcement: Certification and Rating Attachments for Fenestration Technologies DE-FOA-001000-1504 Project Objective This project is to develop an independent rating, certification, labeling, and performance verification

  5. Discomfort glare with complex fenestration systems and the impact on energy use when using daylighting control

    SciTech Connect (OSTI)

    Hoffmann, Sabine; McNeil, Andrew; Lee, Eleanor S.; Kalyanam, Raghuram

    2015-11-03

    Glare is a frequent issue in highly glazed buildings. A modelling approach is presented that uses discomfort glare probability and discomfort glare index as metrics to determine occupants’ behaviour. A glare control algorithm that actuated an interior shade for glare protection based on the predicted perception was implemented in a building simulation program. A reference case with a state-of-the-art base glazing was compared to the same glazing but with five different complex fenestration systems, i.e., exterior shades. The windows with exterior shades showed significant variations in glare frequencies. Energy use intensity in a prototypical office building with daylighting controls was greatly influenced for the systems with frequent glare occurrence. While the base glazing could benefit from glare control, some of the exterior shades showed significantly greater energy use when discomfort glare-based operation of interior shades was considered.

  6. A Novel Fenestration Technique for Abdominal Aortic Dissection Membranes Using a Combination of a Needle Re-entry Catheter and the 'Cheese-wire' Technique

    SciTech Connect (OSTI)

    Kos, Sebastian; Guerke, Lorenz; Jacob, Augustinus L.

    2011-12-15

    Purpose: This study was designed to demonstrate the applicability of a combined needle-based re-entry catheter and 'cheese-wire' technique for fenestration of abdominal aortic dissection membranes. Methods: Four male patients (mean age: 65 years) with acute complicated aortic type B dissections were treated at our institution by fenestrating the abdominal aortic dissection membrane using a hybrid technique. This technique combined an initial membrane puncture with a needle-based re-entry catheter using a transfemoral approach. A guidewire was passed through the re-entry catheter and across the membrane. Using a contralateral transfemoral access, this guidewire was then snared, creating a through-and-through wire access. The membrane was then fenestrated using the cheese-wire maneuver. Results: We successfully performed: (a) membrane puncture; (b) guidewire passage; (c) guidewire snaring; and (d) cheese-wire maneuver in all four cases. After this maneuver, decompression of the false lumen and acceptable arterial inflow into the true lumen was observed in all cases. The dependent visceral arteries were reperfused. In one case, portions of the fenestrated membrane occluded the common iliac artery, which was immediately and successfully stented. In another case, long-standing intestinal hypoperfusion before the fenestration resulted in reperfusion-related shock and intraoperative death of the patient. Conclusions: The described hybrid approach for fenestration of dissection membranes is technically feasible and may be established as a therapeutic method in cases with a complicated type B dissection.

  7. Measurement of fenestration net energy performance: Considerations leading to development of a Mobile Window Thermal Test (MoWitt) facility

    SciTech Connect (OSTI)

    Klems, J.H.

    1988-08-01

    The authors present a detailed consideration of the energy flows entering a building space and the effect of random measurement errors on determining fenestration performance. Estimates of error magnitudes are made for a passive test cell; they show that a more accurate test facility is needed for reliable measurements on fenestration systems with thermal resistance 2-10 times that of single glazing or with shading coefficients less than 0.7. A test facility of this type, built at Lawrence Berkeley Laboratory, is described. The effect of random errors in this facility is discussed and computer calculations of its performance are presented. The discussion shows that, for any measurement facility, random errors are most serious in nighttime measurements, and systematic errors are most important in daytime measurements. It is concluded that, for this facility, errors from both sources should be small.

  8. Sensitivity of fenestration solar gain to source spectrum and angle of incidence

    SciTech Connect (OSTI)

    McCluney, W.R.

    1996-12-31

    The solar heat gain coefficient (SHGC) is the fraction of solar radiant flux incident on a fenestration system entering a building as heat gain. In general it depends on both the angle of incidence and the spectral distribution of the incident solar radiation. In attempts to improve energy performance and user acceptance of high-performance glazing systems, manufacturers are producing glazing systems with increasing spectral selectivity. This poses potential difficulties for calculations of solar heat gain through windows based upon the use of a single solar spectral weighting function. The sensitivity of modern high-performance glazing systems to both the angle of incidence and the shape of the incident solar spectrum is examined using a glazing performance simulation program. It is found that as the spectral selectivity of the glazing system increases, the SHGC can vary as the incident spectral distribution varies. The variations can be as great as 50% when using several different representative direct-beam spectra. These include spectra having low and high air masses and a standard spectrum having an air mass of 1.5. The variations can be even greater if clear blue diffuse skylight is considered. It is recommended that the current broad-band shading coefficient method of calculating solar gain be replaced by one that is spectral based.

  9. Prediction of the multicellular flow regime of natural convection in fenestration glazing cavities

    SciTech Connect (OSTI)

    Zhao, Y.; Goss, W.P.; Curcija, D.

    1997-12-31

    In this work, gas-filled tall rectangular cavities, typically found in insulating glazing units (IGUs) of fenestration systems, with constant temperatures at the side walls and zero heat flux at the top and bottom, were investigated. Critical Rayleigh numbers, Ra{sub c}, at which multicellular flow begins to form were determined for aspect ratios from 10.7 to 80. Using a general-purpose fluid flow and heat transfer finite-element analysis computer program (FDI 1993), numerical calculations were performed over the range of aspect ratios, A, from 10 to 80 with Rayleigh numbers, Ra, varying within the laminar flow regime. The calculations revealed that for aspect ratios between 10.7 and 30, the multicellular flow pattern dies out before the flow enters the turbulent flow regime. In addition, the lowest aspect ratio at which multicellular flow patterns existed was 10.7, which is lower than the lowest limit (A = 12) published by other researchers. The resulting critical Rayleigh numbers are plotted on a graph as a function of the aspect ratio and the Rayleigh numbers. The overall heat transfer results in terms of the average, or integrated, Nusselt numbers, Nu, are compared with available numerical and experimental data on multicellular flow in rectangular cavities, and good agreement was found. Also, streamline contour plots and temperature profiles are plotted for selected cases.

  10. A new method for predicting the solar heat gain of complex fenestration systems: II, Detailed description of the matrix layer calculation

    SciTech Connect (OSTI)

    Klems, J.H.

    1993-10-01

    A new method of predicting the solar heat gain through complex fenestration systems involving nonspecular layers such as shades or blinds has been examined in a project jointly sponsored by ASHRAE and DOE. In this method, a scanning radiometer is used to measure the bidirectional radiative transmittance and reflectance of each layer of a fenestration system. The properties of systems containing these layers are then built up computationally from the measured layer properties using a transmission/multiple-reflection calculation. The calculation produces the total directional-hemispherical transmittance of the fenestration system and the layer-by-layer absorptances. These properties are in turn combined with layer-specific measurements of the inward-flowing fractions of absorbed solar energy to produce the overall solar heat gain coefficient. A preceding paper outlined the method and provided the physical derivation of the calculation. In this second of a series of related papers the detailed development of the matrix layer calculation is presented.

  11. Foreign nationals who receive science or engineering Ph.D.`s from US universities: Stay rates and characteristics of stayers

    SciTech Connect (OSTI)

    Finn, M.G.; Pennington, L.A.; Anderson, K.H.

    1995-04-01

    This report studies the behavior of foreign nationals who received Ph.D. degrees in science or engineering from US universities during the period 1984--1990. It addresses two distinct questions: What proportion of foreign students stay to work in the United States after graduation; and do foreign students who leave the United States differ from those who stay? Descriptive statistics are provided to answer the first question. These estimates of stay rates have small margins of error because they were produced from the tax payment records of the Social Security Administration. The estimates of stay rates in also provide a partial answer to the second question as well as we are able to provide stay rates for different degree fields and different countries of citizenship, thereby identifying country-specific and field-specific differences in stay rates.

  12. A new method for predicting the solar heat gain of complex fenestration systems: 1, Overview and derivation of the matrix Layer calculation

    SciTech Connect (OSTI)

    Klems, J.H.

    1993-10-01

    A new method of predicting the solar heat gain through complex fenestration systems involving nonspecular layers such as shades or blinds has been examined in a project jointly sponsored by ASHRAE and DOE. In this method, a scanning radiometer is used to measure the bidirectional radiative transmittance and reflectance of each layer of a fenestration system. The properties of systems containing these layers are then built up computationally from the measured layer properties using a transmission/multiple-reflection calculation. The calculation produces the total directional-hemispherical transmittance of the fenestration system and the layer-by-layer absorptances. These properties are in turn combined with layer-specific measurements of the inward-flowing fractions of absorbed solar energy to produce the overall solar heat gain coefficient. In this first in a series of related papers describing the project, the assumptions and limitations of the calculation method are described and the derivation of the matrix calculation technique from the initial integral equations is presented.

  13. Qualitative determination of H2S crossover rates in nation membranes using ion-probe techniques

    SciTech Connect (OSTI)

    Brosha, Eric L; Rockward, Tommy; Uribe, Francisco A; Garzon, Fernando H

    2008-01-01

    Polymer electrolyte membrane fuel cells are sensitive to impurities that may be present in either the oxidizer or fuel. H2S, even at the ppb level, will have a dramatic and adverse affect on fuel cell performance. The H2S permeability through dry and humidified Nafion PEMFC membranes was studied using ion probe techniques. A sulfide anti-oxidant buffer solution was used to trap and concentrate trace quantities of H2S that permeated through 50 cm2samples of Nafion 117 and 212 membranes using a partial pressure difference up to I030ppm at room temperature. Experiments were conducted for up to 24 hours in order to achieve sulfide ion concentrations high enough to be precisely determined by subsequent titration with Pb(N03)2. The rate of H2S crossover for dry 117 and 212 were identical at 1.2e-7 g/min. Humidification increased the crossover rate to 5.ge-7 glmin and 1.8e-6 glmin for 117 and 212 respectively. Although the data collected in this work show that the rate of H2S crossover increases with water content and reduced membrane thickness, an accurate determination of permeation constants from this work was not possible because the H2S partial pressure was not constant throughout the experiment.

  14. National and Regional Water and Wastewater Rates For Use inCost-Benefit Models and Evaluations of Water Efficiency Programs

    SciTech Connect (OSTI)

    Fisher, Diane C.; Whitehead, Camilla Dunham; Melody, Moya

    2006-09-01

    Calculating the benefits and costs of water conservation orefficiency programs requires knowing the marginal cost of the water andwastewater saved by those programs. Developing an accurate picture of thepotential cost savings from water conservation requires knowing the costof the last few units of water consumed or wastewater released, becausethose are the units that would be saved by increased water efficiency.This report describes the data we obtained on water and wastewater ratesand costs, data gaps we identified, and other issues related to using thedata to estimate the cost savings that might accrue from waterconservation programs. We identified three water and wastewater ratesources. Of these, we recommend using Raftelis Financial Corporation(RFC) because it: a) has the most comprehensive national coverage; and b)provides greatest detail on rates to calculate marginal rates. The figurebelow shows the regional variation in water rates for a range ofconsumption blocks. Figure 1A Marginal Rates of Water Blocks by Regionfrom RFC 2004Water and wastewater rates are rising faster than the rateof inflation. For example, from 1996 to 2004 the average water rateincreased 39.5 percent, average wastewater rate increased 37.8 percent,the CPI (All Urban) increased 20.1 percent, and the CPI (Water andSewerage Maintenance) increased 31.1 percent. On average, annualincreases were 4.3 percent for water and 4.1 percent for wastewater,compared to 2.3 percent for the All Urban CPI and 3.7 percent for the CPIfor water and sewerage maintenance. If trends in rates for water andwastewater rates continue, water-efficient products will become morevaluable and more cost-effective.

  15. Savings from energy efficient windows: Current and future savings from new fenestration technologies in the residential market

    SciTech Connect (OSTI)

    Frost, K.; Arasteh, D.; Eto, J.

    1993-04-01

    Heating and cooling energy lost through windows in the residential sector (estimated at two-thirds of the energy lost through windows in all sectors) currently accounts for 3 percent (or 2.8 quads) of total US energy use, costing over $26 billion annually in energy bills. Installation of energy-efficient windows is acting to reduce the amount of energy lost per unit window area. Installation of more energy efficient windows since 1970 has resulted in an annual savings of approximately 0.6 quads. If all windows utilized existing cost effective energy conserving technologies, then residential window energy losses would amount to less than 0.8 quads, directly saving $18 billion per year in avoided energy costs. The nationwide installation of windows that are now being developed could actually turn this energy loss into a net energy gain. Considering only natural replacement of windows and new construction, appropriate fenestration policies could help realize this potential by reducing annual residential window energy losses to 2.2 quids by the year 2012, despite a growing housing stock.

  16. Characterization of the neutron irradiation system for use in the Low-Dose-Rate Irradiation Facility at Sandia National Laboratories.

    SciTech Connect (OSTI)

    Franco, Manuel,

    2014-08-01

    The objective of this work was to characterize the neutron irradiation system consisting of americium-241 beryllium (241AmBe) neutron sources placed in a polyethylene shielding for use at Sandia National Laboratories (SNL) Low Dose Rate Irradiation Facility (LDRIF). With a total activity of 0.3 TBq (9 Ci), the source consisted of three recycled 241AmBe sources of different activities that had been combined into a single source. The source in its polyethylene shielding will be used in neutron irradiation testing of components. The characterization of the source-shielding system was necessary to evaluate the radiation environment for future experiments. Characterization of the source was also necessary because the documentation for the three component sources and their relative alignment within the Special Form Capsule (SFC) was inadequate. The system consisting of the source and shielding was modeled using Monte Carlo N-Particle transport code (MCNP). The model was validated by benchmarking it against measurements using multiple techniques. To characterize the radiation fields over the full spatial geometry of the irradiation system, it was necessary to use a number of instruments of varying sensitivities. First, the computed photon radiography assisted in determining orientation of the component sources. With the capsule properly oriented inside the shielding, the neutron spectra were measured using a variety of techniques. A N-probe Microspec and a neutron Bubble Dosimeter Spectrometer (BDS) set were used to characterize the neutron spectra/field in several locations. In the third technique, neutron foil activation was used to ascertain the neutron spectra. A high purity germanium (HPGe) detector was used to characterize the photon spectrum. The experimentally measured spectra and the MCNP results compared well. Once the MCNP model was validated to an adequate level of confidence, parametric analyses was performed on the model to optimize for potential

  17. Using digital imaging to assess spectral solar-optical properties of complex fenestration materials: A new approach in video-goniophotometry

    SciTech Connect (OSTI)

    Andersen, Marilyne; Stokes, Eleanor; Gayeski, Nicholas; Browne, Courtney

    2010-04-15

    A large variety of angularly selective fenestration systems have been developed in the past two decades and show great potential in improving visual comfort while reducing energy consumption, especially when combined with spectrally selective properties. Such systems include light-redirecting glazing, shading, film coatings, reflectors and others. To assess the potential of these systems accurately and reliably, one needs to be able to predict in detail how they modify the energy, direction and spectral make-up of solar radiation. For this assessment, spectral (wavelength-dependent) Bidirectional Transmission or Reflection Distribution Functions are used, usually referred to as BTDFs or BRDFs, or more generally BSDFs for Scattering Functions. To enable a faster, cheaper, and continuous investigation of these properties over most of the solar spectrum (400-1700 nm), an innovative goniospectrometric instrument has been created, relying on digital imaging, on light collection by an ellipsoidal half-transparent mirror, and on a filtering method in the visible range to generate spectral radiometric BSDFs. This so-called Heliodome instrument is described in this paper. It enables the performance of new fenestration technologies to be assessed in terms of lighting and solar gains management potential. The rotating table also serves as a heliodon, an architectural design tool for visualizing sunlight distribution inside a scale model and performing analyses on appropriate sun control strategies. The Heliodome's major innovations compared to other devices are to enable an analysis of both the visible and the near-infrared portions of the solar spectrum, to provide spectral as well as photometric light distribution data, and to ensure a continuous investigation of the transmitted or reflected light in a time-efficient way. (author)

  18. Impact of switching to the ICRP-74 neutron flux-to-dose equivalent rate conversion factors at the Sandia National Laboratory Building 818 Neutron Source Range.

    SciTech Connect (OSTI)

    Ward, Dann C.

    2009-03-01

    Sandia National Laboratories (SNL) maintains a neutron calibration facility which supports the calibration, maintenance, and repair of Radiation Protection Instruments. The SNL neutron reference fields are calibrated using the following methodology: Fluence rate is initially established by calculation using the NIST traceable source emission rate (decay corrected). Correction factors for the effects of room return or scatter, and source anisotropy are then developed by using a suitable radiation transport code to model the geometry of the facility. The conventionally true neutron dose rates are then determined using the appropriate fluence-todose equivalent conversion coefficients at several reference positions. This report describes the impact on calculated neutron dose rates of switching from NCRP-38 to CRP-74 neutron flux-todose equivalent rate conversion factors. This switch is driven by recent changes to dosimetry requirements addressed in 10 CFR 835 (Occupational Radiation Protection).

  19. Sources of Mercury to East Fork Poplar Creek Downstream from the Y-12 National Security Complex: Inventories and Export Rates

    SciTech Connect (OSTI)

    Southworth, George R; Greeley Jr, Mark Stephen; Peterson, Mark J; Lowe, Kenneth Alan; Ketelle, Richard H; Floyd, Stephanie B

    2010-02-01

    East Fork Poplar Creek (EFPC) in Oak Ridge, Tennessee, has been heavily contaminated with mercury (also referred to as Hg) since the 1950s as a result of historical activities at the U.S. Department of Energy (DOE) Y-12 National Security Complex (formerly the Oak Ridge Y-12 Plant and hereinafter referred to as Y-12). During the period from 1950 to 1963, spills and leaks of elemental mercury (Hg{sup 0}) contaminated soil, building foundations, and subsurface drainage pathways at the site, while intentional discharges of mercury-laden wastewater added 100 metric tons of mercury directly to the creek (Turner and Southworth 1999). The inventory of mercury estimated to be lost to soil and rock within the facility was 194 metric tons, with another estimated 70 metric tons deposited in floodplain soils along the 25 km length of EFPC (Turner and Southworth 1999). Remedial actions within the facility reduced mercury concentrations in EFPC water at the Y-12 boundary from > 2500 ng/L to about 600 ng/L by 1999 (Southworth et al. 2000). Further actions have reduced average total mercury concentration at that site to {approx}300 ng/L (2009 RER). Additional source control measures planned for future implementation within the facility include sediment/soil removal, storm drain relining, and restriction of rainfall infiltration within mercury-contaminated areas. Recent plans to demolish contaminated buildings within the former mercury-use areas provide an opportunity to reconstruct the storm drain system to prevent the entry of mercury-contaminated water into the flow of EFPC. Such actions have the potential to reduce mercury inputs from the industrial complex by perhaps as much as another 80%. The transformation and bioaccumulation of mercury in the EFPC ecosystem has been a perplexing subject since intensive investigation of the issue began in the mid 1980s. Although EFPC was highly contaminated with mercury (waterborne mercury exceeded background levels by 1000-fold, mercury in

  20. Geologic ages and accumulation rates of basalt-flow groups and sedimentary interbeds in selected wells at the Idaho National Engineering Laboratory, Idaho

    SciTech Connect (OSTI)

    Anderson, S.R.; Liszewski, M.J.; Cecil, L.D.

    1997-01-01

    Geologic ages and accumulation rates, estimated from regressions, were used to evaluate measured ages and interpreted stratigraphic and structural relations of basalt and sediment in the unsaturated zone and the Snake River Plain aquifer at the Idaho National Engineering Laboratory (INEL) in eastern Idaho. Geologic ages and accumulation rates were estimated from standard linear regressions of 21 mean potassium-argon (K-Ar) ages, selected mean paleomagnetic ages, and cumulative depths of a composite stratigraphic section composed of complete intervals of basalt and sediment that were deposited in areas of past maximum subsidence. Accumulation rates also were estimated from regressions of stratigraphic intervals in three wells in and adjacent to an area of interpreted uplift at and near the Idaho Chemical Processing Plant (ICPP) and the Test Reactor Area (TRA) to allow a comparison of rates in areas of past uplift and subsidence. Estimated geologic ages range from about 200 thousand to 1.8 million years before present and are reasonable approximations for the interval of basalt and sediment above the effective base of the aquifer, based on reported uncertainties of corresponding measured ages. Estimated ages between 200 and 800 thousand years are within the range of reported uncertainties for all 15 K-Ar ages used in regressions and two out of three -argon ({sup 40}Ar/{sup 39}Ar) ages of duplicate argon samples. Two sets of estimated ages between 800 thousand and 1.8 million years are within the range of reported uncertainties for all seven K-Ar ages used in regressions, which include one shared age of about 800 thousand years. Two sets of ages were estimated for this interval because K-Ar ages make up two populations that agree with previous and revised ages of three paleomagnetic subchrons. The youngest set of ages is consistent with a K-Ar age from the effective base of the aquifer that agrees with previous ages of the Olduvai Normal-Polarity Subchron.

  1. Rate Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    links Financial Information Financial Public Processes Asset Management Cost Verification Process Rate Cases Rate Information Current Power Rates Current Transmission Rates...

  2. Florida Solar Energy Center: Final report 1996

    SciTech Connect (OSTI)

    1996-07-18

    A small research group at the Florida Solar Energy Center has been working for several years to perform research and other work in support of U.S. Department of Energy and State of Florida energy efficiency objectives in the area of windows, skylights, clerestories, and other glazed apertures in buildings, generically called fenestrations. This work includes not only thermal energy transfer through fenestration systems but also the controlled introduction of daylight illumination for the displacement of electric lighting energy. Work in the last few years has focused almost entirely on providing technical support to the National Fenestration Rating Council`s program to introduce energy performance rating and labelling of windows into the United States. This work has included a variety of activities. (1) Annual energy performance simulations aimed at determining the relative performances of a variety of residential window and glazing options for different climates. (2) Evaluation of Lawrence Berkeley Laboratory reports and software products in the area of fenestrations. (3) Development of better computational tools for predicting the solar spectral irradiance incident on fenestration systems and contributing to solar radiant heat gain, and the effects of exterior shading. (4) Service on various committees and task groups of the NFRC as well as participation in and technical support for ASHRAE`s technical committee 4.5 on fenestrations. (5) Evaluation of the daylighting potential of commercial buildings in hot humid climates.

  3. Rate Schedules

    Broader source: Energy.gov [DOE]

    One of the major responsibilities of Southeastern is to design, formulate, and justify rate schedules. Repayment studies prepared by the agency determine revenue requirements and appropriate rate...

  4. Finance & Rates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    all of its costs in the rates it charges customers for wholesale electricity and transmission services. The agency is committed to careful cost management consistent with its...

  5. sandia national labs | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    sandia national labs

  6. Brookhaven National Laboratory | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Brookhaven National Laboratory

  7. FY 2012 Lawrence Livermore National Security, LLC, PER Summary | National

    National Nuclear Security Administration (NNSA)

    Nuclear Security Administration | (NNSA) Lawrence Livermore National Security, LLC, PER Summary SUMMARY OF FY 2012 LAWRENCE LIVERMORE NATIONAL SECURITY, LLC, AWARD FEE DETERMINATION Total Available Fee Total Fee Earned % $50,506,024 $44,555,181 88% Lawrence Livermore National Security, LLC, the management and operating contractor for the Lawrence Livermore National Laboratory, earned a Very Good rating in Programs and Operations, a Good rating in Institutional Management and Business, and 88

  8. Advanced Facades, Daylighting, and Complex Fenestration Systems

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    direct solar irradiance while maintaining useful daylight and outdoor view, reducing perimeter zone energy use by ... Daylight-redirecting: Invention disclosure filed, 22813 ...

  9. Fenestration Software Tools | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    save energy in new and existing buildings, both residential and commercial sectors. ... BTO is funding the Window Coverings Manufacturing Association (WCMA) to create a program to ...

  10. Associations of blood lead, cadmium, and mercury with estimated glomerular filtration rate in the Korean general population: Analysis of 2008-2010 Korean National Health and Nutrition Examination Survey data

    SciTech Connect (OSTI)

    Kim, Yangho; Lee, Byung-Kook

    2012-10-15

    Introduction: The objective of this study was to evaluate associations between blood lead, cadmium, and mercury levels with estimated glomerular filtration rate in a general population of South Korean adults. Methods: This was a cross-sectional study based on data obtained in the Korean National Health and Nutrition Examination Survey (KNHANES) (2008-2010). The final analytical sample consisted of 5924 participants. Estimated glomerular filtration rate (eGFR) was calculated using the MDRD Study equation as an indicator of glomerular function. Results: In multiple linear regression analysis of log2-transformed blood lead as a continuous variable on eGFR, after adjusting for covariates including cadmium and mercury, the difference in eGFR levels associated with doubling of blood lead were -2.624 mL/min per 1.73 m Superscript-Two (95% CI: -3.803 to -1.445). In multiple linear regression analysis using quartiles of blood lead as the independent variable, the difference in eGFR levels comparing participants in the highest versus the lowest quartiles of blood lead was -3.835 mL/min per 1.73 m Superscript-Two (95% CI: -5.730 to -1.939). In a multiple linear regression analysis using blood cadmium and mercury, as continuous or categorical variables, as independent variables, neither metal was a significant predictor of eGFR. Odds ratios (ORs) and 95% CI values for reduced eGFR calculated for log2-transformed blood metals and quartiles of the three metals showed similar trends after adjustment for covariates. Discussion: In this large, representative sample of South Korean adults, elevated blood lead level was consistently associated with lower eGFR levels and with the prevalence of reduced eGFR even in blood lead levels below 10 {mu}g/dL. In conclusion, elevated blood lead level was associated with lower eGFR in a Korean general population, supporting the role of lead as a risk factor for chronic kidney disease.

  11. CX-006468: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Testing Subcontractor for Fenestration System Energy Performance Rating Development and ResearchCX(s) Applied: B3.6Date: 08/12/2011Location(s): Everett, WashingtonOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  12. CX-006479: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Fenestration System Energy Performance Rating Development and ResearchCX(s) Applied: A1, A2, A9, A11, B1.2, B5.1Date: 08/12/2011Location(s): Greenbelt, MarylandOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  13. Conducting Quantitative Electrochemistry on a TEM to Study Rate...

    Office of Scientific and Technical Information (OSTI)

    Conducting Quantitative Electrochemistry on a TEM to Study Rate Dependencies in the ... Research Org: Sandia National Laboratories Livermore, CA; Sandia National Laboratories ...

  14. Rates Meetings and Workshops (pbl/rates)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Rate Case Workshops Other Power Rates-Related Workshops July 1, 2004 - Rates and Finances Workshop (updated June 25, 2004) (financial and rate forecasts and scenarios for FY...

  15. Expert Meeting Report: Exploring the Disconnect Between Rated...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exploring the Disconnect Between Rated and Field Performance of Water Heating Systems M. ... Between Rated and Field Performance of Water Heating Systems Prepared for: The National ...

  16. FY 2012 National Security Technologies, LLC, PER Summary | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) National Security Technologies, LLC, PER Summary SUMMARY OF FY 2012 NATIONAL SECURITY TECHNOLOGIES, LLC, AWARD FEE DETERMINATION Total Available Fee Total Fee Earned % $29,855,764 $28,020,923 93.85% National Security Technologies, LLC, the management and operating contractor for the Nevada National Security Site, earned an "Excellent" rating in Program, a "Very Good" in Operations and Institutional and Business Management, and 93.85

  17. National Competitiveness

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Competition National Clean Energy Business Plan Competition The National Clean Energy Business Plan Competition inspired nearly 300 university teams across the country to create new businesses to commercialize promising energy technologies developed at U.S. universities and the National Laboratories. After pitching their business plans to panels of judges at the regional semifinals and finals, six teams advanced to the national competition for a chance to compete in the popular vote and a grand

  18. Status of the Broadband Heating Rate Profile (BBHRP) VAP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Status of the Broadband Heating Rate Profile (BBHRP) VAP Mlawer, Eli Atmospheric & Environmental Research, Inc. Clough, Shepard Atmospheric and Environmental Research Delamere, Jennifer Atmospheric and Environmental Research, Inc. Miller, Mark Brookhaven National Laboratory Johnson, Karen Brookhaven National Laboratory Troyan, David Brookhaven National Laboratory Jensen, Michael Brookhaven National Laboratory Shippert, Timothy Pacific Northwest National Laboratory Long, Chuck Pacific

  19. Power Rates Announcements (pbl/rates)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    WP-10 Rate Case WP-07 Rate Case WP-07 Supplemental Rate Case ASC Methodology Adjustments (2007-2009) Adjustments (2002-2006) Previous Rate Cases Financial Choices (2003-06) Power...

  20. Current BPA Power Rates (pbl/rates)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Workshops WP-10 Rate Case WP-07 Rate Case WP-07 Supplemental Rate Case ASC Methodology Adjustments (2007-2009) Adjustments (2002-2006) Previous Rate Cases Financial...

  1. Consent Order, Lawrence Livermore National National Security...

    Office of Environmental Management (EM)

    Lawrence Livermore National National Security, LLC - WCO-2010-01 Consent Order, Lawrence Livermore National National Security, LLC - WCO-2010-01 October 29, 2010 Issued to Lawrence ...

  2. Current Power Rates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    links Financial Information Financial Public Processes Asset Management Cost Verification Process Rate Cases Rate Information Current Power Rates Current Transmission Rates...

  3. Current Transmission Rates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    links Financial Information Financial Public Processes Asset Management Cost Verification Process Rate Cases Rate Information Current Power Rates Current Transmission Rates...

  4. Previous Power Rates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    links Financial Information Financial Public Processes Asset Management Cost Verification Process Rate Cases Rate Information Current Power Rates Current Transmission Rates...

  5. Previous Transmission Rates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    links Financial Information Financial Public Processes Asset Management Cost Verification Process Rate Cases Rate Information Current Power Rates Current Transmission Rates...

  6. Coal Transportation Rate Sensitivity Analysis

    Reports and Publications (EIA)

    2005-01-01

    On December 21, 2004, the Surface Transportation Board (STB) requested that the Energy Information Administration (EIA) analyze the impact of changes in coal transportation rates on projected levels of electric power sector energy use and emissions. Specifically, the STB requested an analysis of changes in national and regional coal consumption and emissions resulting from adjustments in railroad transportation rates for Wyoming's Powder River Basin (PRB) coal using the National Energy Modeling System (NEMS). However, because NEMS operates at a relatively aggregate regional level and does not represent the costs of transporting coal over specific rail lines, this analysis reports on the impacts of interregional changes in transportation rates from those used in the Annual Energy Outlook 2005 (AEO2005) reference case.

  7. PNCA-02 Rate Case (rates/ratecases)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proposed Adjustment to the Rate for Interchange Energy Imbalances Under the Pacific Northwest Coordination Agreement (PNCA-02 Rate Case) (updated on April 26, 2002) BPA has issued...

  8. Rate Case Elements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proceeding Rate Information Residential Exchange Program Surplus Power Sales Reports Rate Case Elements BPA's rate cases are decided "on the record." That is, in making a decision...

  9. Software Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Windows and Building Envelope » Software Tools Software Tools See past projects. Fenestration Software Tools Lead Performer: Lawrence Berkeley National Laboratory - Berkeley, CA

  10. Sandia National Laboratories:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    26, 2016 Articles Two young veterans become the first women to join Sandia's Wounded Warrior program Warrior Women Former Marine comes home to mentor Española Valley High School students Next-gen cyber defenders Movin' and groovin' Movin' and groovin' Three Livermore teachers win the Sandia National Laboratories Excellence in Teaching Award. Excellence in Teaching awards Sandia rated 'outstanding' 'Outstanding' annual Performance Evaluation Three Sandians selected to receive Albuquerque

  11. National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Supercomputing Challenge draws more than 200 students to Los Alamos National Laboratory April 16, 2015 NOTE TO EDITORS: Media are welcome to attend the awards ceremony from 9 a.m. to noon a.m., April 21 at the Church of Christ, 2323 Diamond Drive, Los Alamos. Student teams from around New Mexico showcase year-long research projects April 20-21 LOS ALAMOS, N.M., April 16, 2015-More than 200 New Mexico students and their teachers are at Los Alamos National Laboratory April 20-21 for the 25th

  12. National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Community invited to learn about emerging technologies July 6, 2016 DisrupTech showcases innovation from Los Alamos National Laboratory LOS ALAMOS, N.M., July 6, 2016-New technologies emerging from Los Alamos National Laboratory that address everything from fusion energy to medical testing will be on display for members of the community, investors and business leaders at the DisrupTech showcase, Thursday, July 14, starting at 1:00 p.m. at the Los Alamos Golf Course Event Center. "We call it

  13. Power Rate Cases (pbl/rates)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Choices (2003-06) Power Function Review (PFR) Firstgov Power Rate Cases BPA's wholesale power rates are set to recover its costs and repay the U.S. Treasury for the Federal...

  14. Chlorite Dissolution Rates

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Carroll, Susan

    Spreadsheets provides measured chlorite rate data from 100 to 300C at elevated CO2. Spreadsheet includes derived rate equation.

  15. Chlorite Dissolution Rates

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Carroll, Susan

    2013-07-01

    Spreadsheets provides measured chlorite rate data from 100 to 300C at elevated CO2. Spreadsheet includes derived rate equation.

  16. Effectiveness of energy rating systems in evaluating Solar Decathlon...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    University, Medford, MA 2 National Renewable Energy Laboratory, Golden, CO Introduction ... Vienna University of Technology Team Austria VUT Design of Energy Rating Systems: * ...

  17. A Realistic Hot Water Draw Specification for Rating Solar Water...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Realistic Hot Water Draw Specification for Rating Solar Water Heaters Preprint J. Burch National Renewable Energy Laboratory J. Thornton Thermal Energy System Specialists, Inc. ...

  18. National Nuclear Security Administration | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing...

  19. Applicable Interest Rates for Slice Product (contracts/slice...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    is the Prime Rate for Large Banks (the base rate on corporate loans posted by at least 75% of the nation's 30 largest Banks) as reported in the Wall Street Journal on the first...

  20. National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ignition Facility Former Army Ranger wins Sandia-sponsored student of the year award Former Army Ranger Damon Alcorn recently received the Sandia National Laboratories-Livermore Chamber of Commerce Student of the Year Award. Presented at the Chamber's State of the City Luncheon last month, the annual award highlights a Las Positas College student with exemplary academic... NNSA makers and hackers engage innovation and partnerships NNSA's labs change the world everyday through cutting-edge

  1. Before a Rate Case

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    links Financial Information Financial Public Processes Asset Management Cost Verification Process Rate Cases BP-18 Rate Case Related Publications Meetings and Workshops Customer...

  2. Rating Agency Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Liabilities Financial Plan Financial Public Processes Asset Management Cost Verification Process Rate Cases Rate Information Residential Exchange Program Surplus Power Sales...

  3. 2012 Transmission Rate Schedules

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2014 Transmission, Ancillary, and Control Area Service Rate Schedules and General Rate Schedule Provisions (FY 2014-2015) October 2013 United States Department of Energy...

  4. BP-18 Rate Proceeding

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Skip navigation links Financial Information Financial Public Processes Asset Management Cost Verification Process Rate Cases BP-18 Rate Case Related Publications Meetings...

  5. BP-12 Rate Case

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Skip navigation links Financial Information Financial Public Processes Asset Management Cost Verification Process Rate Cases BP-18 Rate Case Related Publications Meetings...

  6. BP-16 Rate Case

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Skip navigation links Financial Information Financial Public Processes Asset Management Cost Verification Process Rate Cases BP-18 Rate Case Related Publications Meetings...

  7. NATIONAL LABORATORY

    Office of Environmental Management (EM)

    N E W U T I L I T Y B U S I N E S S M O D E L S : Utility and Regulatory Models for the Modern Era Ronald Lehr former Public Utilities Commissioner A M E R I C A ' S POWER PLAN A m e r i c a ' s P o w e r P l a n Ralph Cavanagh, Natural Resources Defense Council Peter Fox-Penner, Brattle Group Tom King, National Grid Richard Sedano, Regulatory Assistance Project Alison Silverstein, former Federal Energy Regulatory Lisa Wood, Edison Foundation's Institute for Electric Efficiency We would like to

  8. Measurement of Hydrogen Production Rate Based on Dew Point Temperatures: Independent Review

    SciTech Connect (OSTI)

    Duffy, M.; Harrison, K.; Sheahen, T.

    2007-11-01

    This independent review verified Idaho National Labotory's approach of measuring the rate of hydrogen production using dew point temperatures.

  9. Reaction Rate Measurements at the National Criticality Experiments...

    Office of Scientific and Technical Information (OSTI)

    Information Service, Springfield, VA at www.ntis.gov. Authors: Bredeweg, Todd Allen 1 ; Bounds, John Alan 1 ; Brooks, George Henry Jr. 1 ; Favorite, Jeffrey A. 1 ; ...

  10. Argonne APCF achieves LEED Gold rating | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory's Advanced Protein Characterization Facility (APCF) has received the U.S. Green Building Council's Leadership in Energy and Environmental Design (LEED) Gold...

  11. National System Templates: Building Sustainable National Inventory...

    Open Energy Info (EERE)

    System Templates: Building Sustainable National Inventory Management Systems Jump to: navigation, search Tool Summary LAUNCH TOOL Name: National System Templates: Building...

  12. National Security Science | Los National Alamos Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    this Issue (pdf) In 2012 NSS received an NNSA Defense Programs AWARD OF EXCELLENCE National Security Science Mail Stop A142 Los Alamos National Laboratory Los Alamos, NM...

  13. Sandia National Laboratories | National Nuclear Security Administratio...

    National Nuclear Security Administration (NNSA)

    nuclear weapons Bay Area national labs team to tackle long-standing automotive hydrogen storage challenge Sandia National Laboratories chemist Mark Allendorf, shown here at...

  14. Lawrence Livermore National Laboratory Lawrence Livermore National...

    National Nuclear Security Administration (NNSA)

    "Green" supercomputer reduces energy footprint by 75% "Green" supercomputer reduces energy footprint by 75% Lawrence Livermore National Laboratory Lawrence Livermore National ...

  15. National Laboratory Impact Initiative

    Broader source: Energy.gov [DOE]

    The National Laboratory Impact Initiative supports the relationship between the Office of Energy Efficiency & Renewable Energy and the national laboratory enterprise.  The national laboratories...

  16. National Security Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science National Security Science Latest Issue:July 2015 past issues All Issues submit National Security Science Showcasing Los Alamos National Laboratory's work on nuclear...

  17. National Security Science Archive

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science NSS Archive National Security Science Latest Issue:July 2015 past issues All Issues submit National Security Science Archive National Security Science magazine...

  18. Conference Information: 2017 National Environmental Justice Conference and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Training Program | Department of Energy Conference Information: 2017 National Environmental Justice Conference and Training Program Conference Information: 2017 National Environmental Justice Conference and Training Program Conference Information: 2017 National Environmental Justice Conference and Training Program Conference Dates Registration Fees Location Rates Contacts Conference Information: 2017 National Environmental Justice Conference and Training Program (54.43 KB) More Documents

  19. National Security Complex | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Security Complex Y-12 National Security Complex Completes W69 Dismantlement

  20. National Postdoctoral Association | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Postdoctoral Association The National Postdoctoral Association (NPA) is a member-driven organization that provides a unique, national voice for postdoctoral scholars. Since 2003, we have taken on the ambitious agenda to enhance the quality of the postdoctoral experience in the U.S. We have assumed a leadership role in addressing the many issues confronting the postdoctoral community that are national in scope and requiring action beyond the local level. Read more. Argonne National Lab

  1. National Security Facility (NSF) | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Security Facility (NSF) National Security Facility (NSF) Argonne National Laboratory's National Security Facility (NSF) is a flexible, state-of-the-art secure user facility that contains multiple national security networks, video teleconference capability, high-resolution graphics support, a fully powered and cooled data center, multi-level training facilities, and conferencing facilities. The NSF provides tools and resources to enable and strengthen connections between government

  2. Resonant thermonuclear reaction rate

    SciTech Connect (OSTI)

    Haubold, H.J.; Mathai, A.M.

    1986-08-01

    Basic physical principles for the resonant and nonresonant thermonuclear reaction rates are applied to find their standard representations for nuclear astrophysics. Closed-form representations for the resonant reaction rate are derived in terms of Meijer's G-italic-function. Analytic representations of the resonant and nonresonant nuclear reaction rates are compared and the appearance of Meijer's G-italic-function is discussed in physical terms.

  3. Improving Entrainment Rate Parameterization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Entrainment Rate Parameterization For original submission and image(s), see ARM Research Highlights http://www.arm.gov/science/highlights/ Research Highlight Parameterization of entrainment rate is critical for improving representation of cloud- and convection-related processes in climate models; however, much remains unclear. This work seeks to improve understanding and parameterization of entrainment rate by use of aircraft observations and large-eddy simulations of shallow cumulus clouds over

  4. Draft Tiered Rate Methodology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    For Regional Dialogue Discussion Purposes Only Pre-Decisional Draft Tiered Rates Methodology March 7, 2008 Pre-decisional, Deliberative, For Discussion Purposes Only March 7,...

  5. LCC Guidance Rates

    Broader source: Energy.gov [DOE]

    Notepad text file provides the LCC guidance rates in a numbered format for the various regions throughout the U.S.

  6. Los Alamos National Lab: National Security Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    more.. Charlie McMillan, Director of Los Alamos National Laboratory 1:08 Charlie McMillan, Director of Los Alamos National Laboratory, describes how the Lab provides...

  7. National Ignition Facility | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    National Ignition Facility Glass amplifiers in Laser Bay 2 at the National Ignition Facility. The construction of the 192-beam 1.8 MJ UV NIF, the world's most energetic laser, was ...

  8. National Security Photo Gallery | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Competition | National Nuclear Security Administration | (NNSA) Solicitation National Security Campus Management and Operating (M&O) Contract Competition Contract Competition Home Page Welcome to the National Nuclear Security Administration's website for the National Security Campus (NSC) Management and Operating Contract Competition. The NSC in Kansas City, MO, is situated on approximately 177 acres. The facility is leased for the NNSA by the General Services Administration. Satellite

  9. National Laboratory]; Chertkov, Michael [Los Alamos National...

    Office of Scientific and Technical Information (OSTI)

    Chertkov, Michael Los Alamos National Laboratory Construction and Facility Engineering; Energy Conservation, Consumption, & Utilization(32); Energy Planning, Policy, &...

  10. Chemist, Sandia National Laboratories | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) Chemist, Sandia National Laboratories Jerilyn Timlin Jerilyn Timlin October 2009 National Institutes of Health (NIH) New Innovator Award Jerilyn Timlin, a chemist at Sandia National Laboratories, has been presented by the National Institutes of Health (NIH) with a New Innovator Award, one of 55 such awards granted by the NIH this year. The award encourages researchers to explore bold ideas that have the potential to catapult fields forward and speed the translation of

  11. Cognitive Informatics, Pacific Northwest National Laboratory | National

    National Nuclear Security Administration (NNSA)

    Nuclear Security Administration | (NNSA) Cognitive Informatics, Pacific Northwest National Laboratory Frank Greitzer Frank Greitzer Frank Greitzer was invited to be one of six "provocateurs," selected internationally by the National Science Foundation (NSF) and the National Institute of Standards and Technology (NIST), to participate in planning of, and present to a National Academies workshop on Usability, Security, and Privacy of Computer Systems Workshop held July 20-22, 2009 in

  12. Sandia National Laboratories: National Security Programs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nuclear Weapons Defense Systems International, Homeland, & Nuclear Security Energy and Climate Facebook Twitter YouTube Flickr RSS Programs National Security Programs We strive to become the laboratory that the U.S. turns to first for technology solutions to the most challenging problems that threaten peace and freedom for our nation and the globe. At Sandia, national security is our business. We apply advanced science and engineering to help our nation and allies detect, repel, defeat, or

  13. Y-12 National Security Complex recognized for outstanding procurement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    stewardship | Y-12 National Security Complex National Security ... Y-12 National Security Complex recognized for outstanding procurement stewardship Posted: June 19, 2014 - 4:24pm The Y-12 National Security Complex recently was recognized by the National Nuclear Security Administration for achieving the highest savings rate for fiscal year 2013 in the NNSA complex. At the Supply Chain Management Center biannual operational meeting in April, NNSA presented Y-12 Procurement Operations with the

  14. Lawrence Berkeley National Laboratory | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration Berkeley National Laboratory NNSA engineer teaches young people STEM, makes mark on Livermore lab communities. Rick Roses Job: Federal fire protection engineer and explosives safety engineer Educational background: Bachelor's degree in mechanical engineering, University of California, Berkeley (1984) and a master's in national resource strategy, National Defense University (2010). Rick Roses,... Lab employees, officials, business leaders dedicate Livermore Solar Center

  15. Numerical prediction of window condensation potential

    SciTech Connect (OSTI)

    McGowan, A.G.

    1995-08-01

    Although a substantial amount of effort has been expended to develop numerical methods for determining windows U-factors (EE 1983; Goss and Curcija 1994; Standaert 1985; CSA 1993a; NFRC 1991), there has been little work to data on using numerical methods to predict condensation potential. It is perhaps of direct interest to most ASHRAE members to determine heat loss and solar gains through windows as a precursor to sizing heating and cooling equipment, but condensation has long been recognized as an extremely important issue for consumers (and, consequently, for window manufacturers). Moreover, building scientists recognize the link between condensation and increased energy consumption (due to latent loads), reduced occupant comfort and indoor air quality (from the presence of bacteria and mold), and structural damage (where accumulated condensation is absorbed by the building material, thus reducing their structural stability). The National Fenestration Rating Council (NFRC) is developing a rating method for condensation potential in fenestration products as part of its mandate from the US Department of Energy (DOE). A rating method would benefit from the use of simulation as a supplement to physical condensation resistance testing to reduce the cost and time required for implementation and increase the flexibility of the rating method. This paper outlines one of the necessary components in the application of numerical methods for evaluating condensation in fenestration products. The theoretical approach and its practical application are discussed, as well as some comparisons between numerical prediction and physical test results for a sample of products.

  16. Los Alamos National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Administration | (NNSA) Los Alamos National Lab Performance Evaluations FY 2016 FY 2016 Performance Evaluation Plan, Los Alamos National Security, LLC FY 2015 FY 2015 Performance Evaluation Report, Los Alamos National Security, LLC FY 2015 Performance Evaluation Report, Fee Determination Letter, Los Alamos National Security, LLC FY 2015 Performance Evaluation Plan, Los Alamos National Security, LLC FY 2014 FY 2014 Performance Evaluation Report, Los Alamos National Security, LLC FY 2014

  17. National Nuclear Security Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Prepared by U.S. Department of Energy National Nuclear Security Administration Nevada Field Office . Environmental Management Operations February 2015 Nevada National Security ...

  18. National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    U.S. Department of Energy National Nuclear Security Administration Federal Equal ... A. Name and Address of Agency National Nuclear Security Administration Office of ...

  19. National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    U.S. Department of Energy National Nuclear Security Administration Federal Equal ... A. Name and Address of Agency National Nuclear Security Administration 1000 Independence ...

  20. National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    15 National Nuclear Security Administration FY 2013 PER Babcock & Wilcox Technical ... The National Nuclear Security Administration (NNSA) Production Office (NPO) took into ...

  1. First National Technology Center

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    First National Technology First National Technology Center Center Electronic Equipment - manufactured to withstand 8 milliseconds of voltage disruption CBEMA Curve - Chips ...

  2. Level: National Data;

    U.S. Energy Information Administration (EIA) Indexed Site

    (Fuel and Nonfuel), 2006; Level: National Data; Row: Energy Sources and Shipments, ... (Fuel and Nonfuel), 2006; Level: National Data; Row: Energy Sources and Shipments, ...

  3. National Science Bowl Finals

    ScienceCinema (OSTI)

    None

    2010-09-01

    National Science Bowl finals and awards at the National Building Museum in Washington D.C. Monday 5/3/2010

  4. Best Practices: Escalation Rates

    Office of Environmental Management (EM)

    Best Practices Escalation Rates Hosted by: FEDERAL UTILITY PARTNERSHIP WORKING GROUP SEMINAR November 3-4, 2015 Houston, TX Federal Utility Partnership Working Group November 3-4, 2015 Houston, TX Federal Utility Partnership Working Group November 3-4, 2015 Houston, TX Best Practices: Escalation Rate Value of future energy savings * Provides purchasing power for implementing a robust, comprehensive and customized ECM set * Provides an option for paying back financing in the shortest possible

  5. Joshua Bergerson | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Joshua Bergerson Postdoctoral Researcher & President, Postdoctoral Society of Argonne Personal Statement/Research Interests Joshua Bergerson is currently a Postdoctoral Appointee in Energy Systems at Argonne National Laboratory. His research has focused on agent-based modeling, working on the Argonne-developed Commercial Building Agent Model (CoBAM), a program developed to obtain marketplace adoption rates and energy savings potential of various energy efficiency technologies. Dr.

  6. 2007-2009 Power Rate Adjustments (pbl/rates)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Function Review (PFR) Firstgov FY 2007 2009 Power Rate Adjustments BPA's 2007-2009 Wholesale Power Rate Schedules and General Rate Schedule Provisions (GRSPs) took effect on...

  7. WP-07 Power Rate Case (rates/ratecases)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Meetings & Workshops Rate Case Parties Web Site WP-07 Supplemental Rate Case ASC Methodology Adjustments (2007-2009) Adjustments (2002-2006) Previous Rate Cases Financial...

  8. Broadband Longwave Radiative Cooling Rates in Inhomogeneous Stratocumulus Clouds

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Broadband Longwave Radiative Cooling Rates in Inhomogeneous Stratocumulus Clouds M. Ovtchinnikov and T. P. Ackerman Pacific Northwest National Laboratory Richland, Washington D. B. Mechem and Y. L. Kogan Cooperative Institute for Mesoscale Meteorological Studies University of Oklahoma Norman, Oklahoma R. F. Cahalan National Aeronautics and Space Administration Goddard Space Flight Center Greenbelt, Maryland A. B. Davis Los Alamos National Laboratory Los Alamos, New Mexico R. G. Ellingson and E.

  9. Lawrence Livermore National Laboratory | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) Lawrence Livermore National Laboratory Lawrence Livermore National Laboratory (LLNL) is a design laboratory that is responsible for the safety and reliability of the nuclear explosives package in nuclear weapons. It supports surveillance, assessment, and refurbishment of the nuclear weapons stockpile. LLNL also possesses unique high-energy-density physics capabilities and scientific computing assets. The lab is managed by Lawrence Livermore National Security, LLC and

  10. National Nuclear Security Administration Los Alamos National

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration Los Alamos National Security, LLC Fiscal Year 2014 Performance Evaluation Report (PER) NNSA Los Alamos Field Office Performance Period: October 2013 - September 2014 November 14, 2014 NA-LA November 14, 2014 Executive Summary This Performance Evaluation Report (PER) provides the assessment of Los Alamos National Security, LLC performance for the period of October 1, 2013 through September 30, 2014, as evaluated against the objectives defined in the Fiscal

  11. National Science Bowl | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Science Bowl Texas students win regional National Science Bowl competition, secure spot in finals in nation's capital More than 200 students from 37 from High schools across the Texas Panhandle gathered together with a few hundred volunteers for a meeting and competition of the minds: The Pantex Science Bowl 2016. Set up like a game show with buzzers, toss up and bonus questions, these groups of four students... Amarillo Students Win Regional National Science Bowl Competition, Secure Spot in

  12. sandia national laboratory | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    sandia national laboratory Sandia California celebrates 60 years On March 8, Sandia/California celebrates its 60th anniversary. The site, which began with a singular nuclear weapons mission, now supports all Sandia mission areas. Nuclear weapons still accounts for nearly half of the site's work, along with strong programs in homeland security, transportation... Managing the data deluge for national security analysts ALBUQUERQUE, N.M. - After a disaster or national tragedy, bits of information

  13. Engineer, Sandia National Laboratories | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) Engineer, Sandia National Laboratories Clifford Ho Clifford Ho February 2010 Asian American Engineer of the Year Clifford Ho, a Sandia engineer, has been selected by the Chinese Institute of Engineers - USA to receive the Asian American Engineer of the Year Award. The honor is presented each year to the nation's most outstanding Asian American engineers and scientists who make significant, lasting and global contributions to the nation. Ho was recognized for his

  14. Lawrence Livermore National Laboratory | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) Lawrence Livermore National Laboratory Lawrence Livermore National Laboratory DE-AC52-07NA27344 Operated by Lawrence Livermore National Security, LLC BASIC Contract (Official) Modifications (Official) Funding Mods Available Upon Request Conformed Contract (Unofficial) LLNL Sec A (SF33) (pdf, 91KB) See Modifications Section under Conformed Contract Link LLNS Conformed Contract (weblink) LLNL Sec B-H (pdf, 306KB) LLNL Sec I pdf 687KB LLNL Sec J Appx A (pdf, 67KB) LLNL

  15. Pacific Northwest National Laboratory | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration Pacific Northwest National Laboratory NNSA deputy visits PNNL to see radiochemistry and threat detection capabilities NNSA Principal Deputy Administrator Madelyn Creedon visited the Pacific Northwest National Laboratory (PNNL) in Washington this month to see the work it does for the agency, focusing on radiochemistry and threat detection. NNSA hosts international CTBT on-site inspection experts at Nevada National Security Site This month, NNSA hosted a Comprehensive

  16. national security | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    security Klotz visits Y-12 to see progress on new projects and ongoing work on NNSA's national security missions Last week, NNSA Administrator Lt. Gen. Frank Klotz (Ret.) visited the Y-12 National Security Complex to check on the status of ongoing projects like the Uranium Processing Facility as well as the site's continuing uranium operations. He also met with the Region 2 volunteers of the Radiogical... Managing the data deluge for national security analysts ALBUQUERQUE, N.M. - After a

  17. National Lab Impact Initiative

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lab Impact Initiative Energy Efficiency & Renewable Energy EERE National Lab Impact Summit Driving American Energy Innovation and Competitiveness May 4, 2016 | 7:30 am-7:00 pm National Renewable Energy Laboratory Golden, Colorado EERE National Lab Impact Summit // i ` http://www.cyclotronroad.org/home TABLE OF CONTENTS Department of Energy National Lab Abbreviations .........................................................................................................ii Welcome Letter

  18. First National Technology Center

    Office of Energy Efficiency and Renewable Energy (EERE)

    Speaker presentation prepared by Dennis Hughes, a lead property manager with First National Buildings Inc.

  19. national labs | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    and hackers engage innovation and partnerships NNSA's labs change the world everyday through cutting-edge developments in support of NNSA's critical national security missions. ...

  20. National Nuclear Security Administration | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) National Nuclear Security Administration FY15 Year End Report Semi Annual Report FY14 Year End Report Semi Annual

  1. National Security Science | Los National Alamos Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LANSCE: Mission-Critical for National Security Nuclear Energy for Our Challenging Future The Invisible Neutron Threat Blasting Missiles Out of the Sky LANL and the Air Force: ...

  2. National Renewable Energy Laboratory | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    National Renewable Energy Laboratory NNSA lab recognized for innovation to power electric ... Annual Merit Review Awards recognized significant achievements in the Department of Energy

  3. National Ignition Facility Reaches Milestone Early | National...

    National Nuclear Security Administration (NNSA)

    Reaches Milestone Early | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the...

  4. Previous Sandia National Laboratories | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    Apply for Our Jobs Our Jobs Working at NNSA Blog Home About Us Our Operations Acquisition and Project Management M & O Support Department Sandia National Laboratories ...

  5. Sandia National Laboratory Performance Evaluations | National...

    National Nuclear Security Administration (NNSA)

    Sandia National Laboratory Performance Evaluations FY 2016 FY 2016 Performance Evaluation Plan, Sandia Corporation FY 2015 FY 2015 Performance Evaluation Report, Sandia Corporation ...

  6. Lawrence Livermore National Laboratory | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    Life Extension Program Bay Area national labs team to tackle long-standing automotive hydrogen storage challenge SOLAR POWER PURCHASE FOR DOE LABORATORIES More about LLNL...

  7. sandia national lab | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    sandia national lab NNSA Researchers Advance Technology for Remote Reactor Monitoring NNSA's Defense Nuclear Nonproliferation Research and Development Program drives the innovation ...

  8. Manager, Sandia National Laboratories | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    of New Mexico's Anderson School of Management's Hall of Fame Inductee Jim Novak from Sandia National Laboratories will be inducted into the University of New Mexico's ...

  9. Researcher, Sandia National Laboratories | National Nuclear Security...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratories Award: Fellow of the Institute of Electrical & Electronics Engineers (IEEE) Profile: Paul Dodd, a Sandia National Laboratories researcher, has been named a Fellow...

  10. National Security, Weapons Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Security, Weapons Science National Security, Weapons Science National security depends on science and technology. The United States relies on Los Alamos National Laboratory for the best of both. No place on Earth pursues a broader array of world-class scientific endeavors. CoMuEx» Explosives Center» Dual-Axis Radiographic Hydrodynamic Test Facility (DARHT) The Dual-Axis Radiographic Hydrodynamic Test Facility at Los Alamos National Laboratory is part of the DOE's stockpile stewardship

  11. Foreign-national Investigators

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    foreign national investigators Foreign-national Investigators Foreign National Investigators must have access to B174 shown on their badge. Foreign National Investigators must notify Beth Mariotti by e-mail of their first intended presence in B174. By September 2009, it is expected that there will be no restrictions on computer use by Foreign National Investigators at JLF. However, LLNL prohibits the use of personally-owned computers on-site

  12. National Supplemental Screening Program | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Supplemental Screening Program The National Supplemental Screening Program (NSSP) offers medical screenings at no charge for former U.S. Department of Energy (DOE) site workers who may have been exposed to hazardous substances at work. For more information, see the documents below. PDF icon Retiree_Benefits_NSSPbrochure.pdf PDF icon Retiree_Benefits_newtest.pdf PDF icon Retiree_Benefits_NSSPemployees

  13. Argonne National Laboratory | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Argonne National Laboratory First-of-its-Kind NNSA Capability to Support Study of Materials at Extreme Conditions for Stockpile Stewardship WASHINGTON - A new first-of-its-kind-worldwide research capability will help unravel the mysteries of material behavior at extreme conditions and short time scales in support of the Department of Energy's National Nuclear Security Administration's (DOE/NNSA's) vital

  14. Sandia National Laboratories: Sandia National Laboratories: Missions:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Defense Systems & Assessments: Accomplishments Accomplishments About Defense Systems & Assessments Program Areas Accomplishments Archives Cybersecurity Programs Accomplishments Protecting the nation Sandia lasers test and calibrate sensors on U.S. satellites Sandia's scientists and engineers have a significant impact on national security and continually deliver results, including these noteworthy successes from fiscal year 2012: AHW Launch Advanced Hypersonic Weapon test flight

  15. sandia national labotartory | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    sandia national labotartory Sandia National Laboratory Sandia Field Office Contact the Field Office Contract Administration & Business Management Emergency Information Facilities & Projects Nuclear Operations Environment, Safety & Health Public Affairs Safeguards & Security Performance and Quality Assurance Programs NEPA Reading Room

  16. Sequoia Messaging Rate Benchmark

    Energy Science and Technology Software Center (OSTI)

    2008-01-22

    The purpose of this benchmark is to measure the maximal message rate of a single compute node. The first num_cores ranks are expected to reside on the 'core' compute node for which message rate is being tested. After that, the next num_nbors ranks are neighbors for the first core rank, the next set of num_nbors ranks are neighbors for the second core rank, and so on. For example, testing an 8-core node (num_cores = 8)more » with 4 neighbors (num_nbors = 4) requires 8 + 8 * 4 - 40 ranks. The first 8 of those 40 ranks are expected to be on the 'core' node being benchmarked, while the rest of the ranks are on separate nodes.« less

  17. Wildfire Mitigation at Los Alamos National Laboratory | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Wildfire Mitigation at Los Alamos National Laboratory Wildfire Mitigation at Los Alamos National Laboratory The Laboratory's Fire Mitigation program is closely integrated with Los Alamos County, the U.S. Forest Service and the National Park Service to fight any wildfire in the region. The Laboratory's Fire Management posts daily Fire Danger Ratings on their website. Wildfire-Mitigation-at-Los-Alamos-National-Laboratory.pdf (2.69 MB) More Documents & Publications Remediated Nitrate

  18. Residential Solar Valuation Rates

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar Valuation Rates Karl R. Rábago Rábago Energy LLC 1 The Ideal Residential Solar Tariff ‣ Fair to the utility and non-solar customers ‣ Fair compensation to the solar customer ‣ Decouple compensation from incentives ‣ Align public policy goals (decouple compensation from consumption) ‣ Intuitively sound and administratively simple 2 Historical Antecedents ‣ Externalities ‣ Price ≠ Cost ‣ Green Power ‣ Small Is Profitable (http://www.smallisprofitable.org/) ‣ Local

  19. Rotational rate sensor

    DOE Patents [OSTI]

    Hunter, Steven L. (Livermore, CA)

    2002-01-01

    A rate sensor for angular/rotational acceleration includes a housing defining a fluid cavity essentially completely filled with an electrolyte fluid. Within the housing, such as a toroid, ions in the fluid are swept during movement from an excitation electrode toward one of two output electrodes to provide a signal for directional rotation. One or more ground electrodes within the housing serve to neutralize ions, thus preventing any effect at the other output electrode.

  20. honors and awards | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    honors and awards Y-12 recognized for outstanding procurement stewardship The Y-12 National Security Complex recently was recognized by NNSA for achieving the highest savings rate in the NNSA enterprise for fiscal year 2013. At the recent Supply Chain Management Center (SCMC) biannual operational meeting, NNSA presented Y-12 Procurement Operations with the award for... National group honors Sandia radiation effects expert Sandia radiation effects researcher Jim Schwank has won the 2014 IEEE

  1. FY 2012 Los Alamos National Security, LLC, PER Summary | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) Los Alamos National Security, LLC, PER Summary SUMMARY OF FY 2012 LOS ALAMOS NATIONAL SECURITY, LLC, AWARD FEE DETERMINATION Total Available Fee Total Fee Earned % $74,510,494 $59,74x,064 80% Los Alamos National Security, LLC, the management and operating contractor for the Los Alamos National Laboratory, earned a "Very Good" rating in Program, a "Good" in Operations, a "Satisfactory" in Institutional Management and Business, and

  2. Engineer, Sandia National Laboratories | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) Engineer, Sandia National Laboratories Sandra Begay-Campbell Sandra Begay-Campbell Ely S. Parker Award Sandra Begay-Campbell, a Sandia National Laboratories engineer and a member of the Navajo Nation, was selected for the prestigious Ely S. Parker Award by the American Indian Science and Engineering Society at an honors banquet Oct. 31 in Portland, Ore. Begay-Campbell, who has worked at Sandia for 17 years and is a principal member of the technical staff, received the

  3. National Environmental Research Parks

    SciTech Connect (OSTI)

    Not Available

    1994-07-01

    The National Environmental Research Parks are outdoor laboratories that provide opportunities for environmental studies on protected lands that act as buffers around Department of Energy (DOE) facilities. The research parks are used to evaluate the environmental consequences of energy use and development as well as the strategies to mitigate these effects. They are also used to demonstrate possible environmental and land-use options. The seven parks are: Fermilab National Environmental Research Park; Hanford National Environmental Research Park; Idaho National Environmental Research Park; Los Alamos National Environmental Research Park; Nevada National Environmental Research Park; Oak Ridge National Environmental Research Park; and Savannah River National Environmental Research Park. This document gives an overview of the events that led to the creation of the research parks. Its main purpose is to summarize key points about each park, including ecological research, geological characteristics, facilities, and available databases.

  4. Nevada National Security Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    April 24, 2014 Cultural Artifacts Cross Eras at the Nevada National Security Site It is well known that the Nevada National Security Site (NNSS) is home to many artifacts from the ...

  5. National Energy Education Summit

    Broader source: Energy.gov [DOE]

    The National Energy Education Summit is organized by the Council of Energy Research and Education Leaders (CEREL) and will serve as a first-of-its-kind national forum for energy educators, subject...

  6. Sandia National Laboratories

    National Nuclear Security Administration (NNSA)

    feet underground.

    Bay Area national labs team to tackle long-standing automotive hydrogen storage challenge http:www.nnsa.energy.govblogbay-area-national-labs-team-tackle-...

  7. nevada national security site

    National Nuclear Security Administration (NNSA)

    7%2A en Nevada National Security Site operator recognized for green fleet http:www.nnsa.energy.govblognevada-national-security-site-operator-recognized-green-fleet

    The...

  8. 2012 National Electricity Forum

    Broader source: Energy.gov [DOE]

    At the 2012 National Electricity Forum, held February 8-9, 2012 and jointly organized by DOE's Office of Electricity Delivery & Energy Reliability (OE) and the National Association of...

  9. Nevada National Security Site

    Office of Energy Efficiency and Renewable Energy (EERE)

    HISTORYIn 1950, President Truman established what is now known as the Nevada National Security Site (NNSS) to perform nuclear weapons testing activities.  In support of national defense initiatives...

  10. National Geothermal Summit

    Broader source: Energy.gov [DOE]

    The Geothermal Energy Association (GEA) will be holding it’s fifth annual National Geothermal Summit on June 3-4 at the Grand Sierra Resort and Casino in Reno, NV. The National Geothermal Summit is...

  11. Los Alamos National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    participates in National Lab Day to increase awareness of science across the nation April 29, 2010 Events planned May 4-5 at Bradbury Science Museum LOS ALAMOS, New Mexico, April...

  12. Photos | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    -Arms control & nonproliferation --Research reactor conversion -Biometrics -Biotechnology for national security -Cyber security -Facility security -Decision science ...

  13. Videos | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    -Arms control & nonproliferation --Research reactor conversion -Biometrics -Biotechnology for national security -Cyber security -Facility security -Decision science ...

  14. National Hydropower Map

    Broader source: Energy.gov [DOE]

    High-resolution map produced by Oak Ridge National Laboratory showing hydropower resources throughout the United States.

  15. Management | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chemical Sciences & Engineering Focus: Understanding & Control of Interfacial Processes Web Site Michael Thackeray Michael Thackeray (Deputy Director) Argonne National Laboratory...

  16. Facilities | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Facilities Some of the nation's most powerful and sophisticated facilities for energy research Argonne National Laboratory is home to some of the nation's most powerful and sophisticated research facilities. As a U.S. Department of Energy national laboratory, Argonne offers access to the facilities listed below through a variety of arrangements. Advanced Powertrain Research Facility Center for Transportation Research Materials Engineering Research Facility Distributed Energy Research Center

  17. Seneca Nation- 2007 Project

    Broader source: Energy.gov [DOE]

    On the three territories of the Seneca Nation, there exist opportunities for energy development from both renewable and nonrenewable resources.

  18. National User Facilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National User Facilities Our Vision National User Facilities Research Areas In Focus Global Solutions ⇒ Navigate Section Our Vision National User Facilities Research Areas In Focus Global Solutions Berkeley Lab's User Facilities-Engines of Discovery Berkeley Lab's User Facilities provide state-of-the-art resources for scientists across the nation and around the world. About 10,000 researchers a year use these facilities, representing nearly one third of the total for all Department of Energy

  19. National Renewable Energy Laboratory

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tribal Energy Program Review Roger Taylor Manger State, Local & Tribal Integrated Application Group National Renewable Energy Laboratory November 5-8, 2007 Major DOE National Laboratories Brookhaven Brookhaven Pacific Northwest Pacific Northwest Lawrence Berkeley Lawrence Berkeley Lawrence Livermore Lawrence Livermore h h h h h INEL INEL National Renewable National Renewable Energy Laboratory Energy Laboratory Los Alamos Los Alamos Sandia Sandia Argonne Argonne Oak Ridge Oak Ridge Defense

  20. Los Alamos National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    scientists will codirect $14.5 million National Center for Systems Biology July 28, 2009 Lab contributes computer modeling, antibody engineering capabilities Los Alamos, New Mexico, July 28, 2009- Los Alamos National Laboratory scientists will codirect a new National Center for Systems Biology located at the University of New Mexico in Albuquerque. The new Spatiotemporal Modeling Center (STMC) is funded by a $14.5 million, five- year grant from the National Institute for General Medical Sciences

  1. Alamos National Laboratory's 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    .1 million pledged during Los Alamos National Laboratory's 2013 employee giving campaign December 17, 2012 LOS ALAMOS, NEW MEXICO, December 17, 2012-Los Alamos National Laboratory employees have again demonstrated concern for their communities and those in need by pledging a record $2.13 million to United Way and other eligible nonprofit programs. Los Alamos National Security, LLC, which manages and operates the Laboratory for the National Nuclear Security Administration, plans to prorate its $1

  2. Alamos National Security, LLC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Eleven nonprofit organizations receive community giving grants from Los Alamos National Security, LLC December 15, 2009 Los Alamos, New Mexico, December 15, 2009- Eleven local nonprofit organizations with projects supported by Los Alamos National Laboratory employee volunteers received $75,000 in Community Giving grants from Los Alamos National Security, LLC, the company that manages the Lab for the National Nuclear Security Administration. The organizations are located in Los Alamos, Española,

  3. National SCADA Testbed

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab Photovoltaic Systems Evaluation Laboratory PV Regional ... Facility Geomechanics and Drilling Labs National ... Health Monitoring Offshore Wind High-Resolution ...

  4. Downloads | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    --Environmental policy & planning --Geochemistry ... -Decision science --Emergency & disaster management ... the nation to solve society's complex scientific problems. ...

  5. National Geothermal Summit

    Broader source: Energy.gov [DOE]

    The Geothermal Energy Association hosts its annual National Geothermal Summit in Reno, Nevada, June 3-4, 2015.

  6. Writing Effective Initial Summary Ratings Initial Summary Rating...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Initial Summary Ratings Initial Summary Rating (ISR) At the end of the performance cycle, the rating official must prepare an ISR in ePerformance for each SES member who has ...

  7. NATIONAL SECURITY TECHNOLOGIES - NEVADA NATIONAL SECURITY SITE

    National Nuclear Security Administration (NNSA)

    - NEVADA NATIONAL SECURITY SITE FISCAL YEARS 2009 THRU 2015 SMALL BUSINESS PROGRAM RESULTS & FORECAST CATEGORY Total Procurement Total SB Small Disad. Bus Woman-Owned SB Hub-Zone ...

  8. lasers. National Ignition Facility | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    target shot of fiscal year 2015 WASHINGTON - Last week, the National Ignition Facility (NIF) fired its 300th laser target shot in fiscal year (FY) 2015, meeting the year's goal...

  9. National SCADA Test Bed

    Broader source: Energy.gov [DOE]

    The National SCADA Test Bed (NSTB) is a one-of-a-kind national resource that draws on the integrated expertise and capabilities of the Argonne, Idaho, Lawrence Berkeley, Los Alamos, Oak Ridge, Pacific Northwest, and Sandia National Laboratories to address the cybersecurity challenges of energy delivery systems.

  10. Sandia National Laboratory | National Nuclear Security Administration |

    National Nuclear Security Administration (NNSA)

    (NNSA) Sandia National Laboratory NNSA's Sandia National Laboratories are responsible for the development, testing, and production of specialized nonnuclear components and quality assurance and systems engineering for all of the United States' nuclear weapons. Sandia has locations in Albuquerque, New Mexico; Livermore, California; Kauai, Hawaii; and Tonopah, Nevada. Sandia Field Office Contact the Field Office Contract Administration & Business Management Emergency Information Facilities

  11. Sandia National Laboratories | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Sandia National Laboratories Sandia employee dubbed a master at locking down NNSA's enterprise NNSA's primary missions include keeping dangerous materials out of the wrong hands while protecting and maintaining the nation's nuclear deterrent. It's no surprise, then, that NNSA's labs and sites employ the best experts available in security. At NNSA's Sandia... On Womens Equality Day, we celebrate NNSA's talented Women in STEM Sandia California hosts Military Academic Collaboration students Sandia

  12. Sandia National Laboratories | National Nuclear Security Administration |

    National Nuclear Security Administration (NNSA)

    (NNSA) Sandia National Laboratories NNSA's Sandia National Laboratories are responsible for the development, testing, and production of specialized nonnuclear components and quality assurance and systems engineering for all of the United States' nuclear weapons. Sandia has locations in Albuquerque, NM; Livermore, CA; Kauai, HI; and Tonopah, NV. The labs are operated by Sandia Corporation. Visit our website Z-Machine Z-Machine Related News Sandia employee dubbed a master at locking down

  13. Physicist, Lawrence Livermore National Laboratory | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) Physicist, Lawrence Livermore National Laboratory Kennedy Reed Kennedy Reed July 2009 Presidential Award for Excellence in Science and Engineering Mentoring President Obama has named Lawrence Livermore National Laboratory physicist Kennedy Reed as a recipient of the prestigious Presidential Award for Excellence in Science and Engineering Mentoring. Reed is a theoretical physicist at the laboratory, conducting research on atomic collisions in high temperature

  14. Researcher, Lawrence Livermore National Laboratory | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) Researcher, Lawrence Livermore National Laboratory Placeholder for Bruce Macintosh image Bruce Macintosh February 2010 AAAS Newcomb Cleveland Prize A Lawrence Livermore National Laboratory researcher's paper published in November 2008 is co-winner of this year's American Association for the Advancement of Science (AAAS) Newcomb Cleveland Prize. The Paper is one of two outstanding papers published in Science from June 1, 2008 through May 31, 2009. Bruce

  15. Researcher, Lawrence Livermore National Laboratory | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) Researcher, Lawrence Livermore National Laboratory Placeholder for Mike Fitzgerald image Mike Fitzgerald February 2010 AAAS Newcomb Cleveland Prize A Lawrence Livermore National Laboratory researcher's paper published in November 2008 is co-winner of this year's American Association for the Advancement of Science (AAAS) Newcomb Cleveland Prize. The Paper is one of two outstanding papers published in Science from June 1, 2008 through May 31, 2009. Another

  16. Sandia National Laboratories | National Nuclear Security Administration |

    National Nuclear Security Administration (NNSA)

    (NNSA) Sandia National Laboratories Allison Davis Allison Davis October 2009 NNSA Defense Programs Award of Excellence Two individuals and nine teams received the NNSA Defense Programs Awards of Excellence at ceremonies this year at Sandia National Laboratories in New Mexico and California. The NNSA Defense Programs Awards of Excellence were created in the early 1980s to give special recognition to those at the laboratories and plants directly associated with the stockpile modernization

  17. Sandia National Laboratories | National Nuclear Security Administration |

    National Nuclear Security Administration (NNSA)

    (NNSA) Sandia National Laboratories Kevin Eklund Kevin Eklund May 2010 NNSA Defense Programs Awards of Excellence Two individuals and nine teams received the NNSA Defense Programs Awards of Excellence at ceremonies this year at Sandia National Laboratories in New Mexico and California. The NNSA Defense Programs Awards of Excellence were created in the early 1980s to give special recognition to those at the laboratories and plants directly associated with the stockpile modernization program.

  18. Lawrence Livermore National Laboratories | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration Livermore National Laboratories NNSA, Air Force Complete Successful B61-12 Life Extension Program Instrumented Flight Tests WASHINGTON, D.C. - The National Nuclear Security Administration (NNSA) and United States Air Force completed eight successful B61-12 Life Extension Program (LEP) Vibration Fly Around/ Instrumented Measurement Vehicle (VFA/IMV) tests at Eglin Air Force Base and Edwards Air Force Base during July to

  19. Writing Effective Initial Summary Ratings Initial Summary Rating (ISR)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Initial Summary Ratings Initial Summary Rating (ISR) At the end of the performance cycle, the rating official must prepare an ISR in ePerformance for each SES member who has completed at least 90 days on an established performance plan. Rating officials must take into account the SES member's accomplishments achieved during the performance cycle and the impact to the organization's performance. Rating officials must appraise executives realistically and fairly and avoid ratings inflation.

  20. October 1996 - September 2001 Wholesale Power Rates (rates/previous...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    affecting a specific power purchase. For more specific information see: 1996 Final Wholesale Power and Transmission Rate Schedules: Power Rates (PDF, 84 pages, 188 kb) Ancillary...

  1. PULSE RATE DIVIDER

    DOE Patents [OSTI]

    McDonald, H.C. Jr.

    1962-12-18

    A compact pulse-rate divider circuit affording low impedance output and high input pulse repetition rates is described. The circuit features a single secondary emission tube having a capacitor interposed between its dynode and its control grid. An output pulse is produced at the anode of the tube each time an incoming pulse at the control grid drives the tube above cutoff and the duration of each output pulse corresponds to the charging time of the capacitor. Pulses incoming during the time the grid bias established by the discharging capacitor is sufficiently negative that the pulses are unable to drive the tube above cutoff do not produce output pulses at the anode; these pulses are lost and a dividing action is thus produced by the circuit. The time constant of the discharge path may be vanied to vary in turn the division ratio of the circuit; the time constant of the charging circuit may be varied to vary the width of the output pulses. (AEC)

  2. Los Alamos National Security, LLC Los Alamos National Laboratory...

    Office of Environmental Management (EM)

    Security, LLC Los Alamos National Laboratory (LANL) Voluntary Protection Program (VPP) Assessment Los Alamos National Security, LLC Los Alamos National Laboratory (LANL) Voluntary...

  3. Los Alamos National Laboratory participates in National Lab Day...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab Day Los Alamos National Laboratory participates in National Lab Day to increase awareness of science across the nation Connecting teachers and students with scientists,...

  4. cygnus | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    and operated with National Securities Technologies and Los Alamos National Laboratory (LANL) at the Nevada National Security Site (NNSS), has fired its 3,000th shot. Originally...

  5. Schneider National | Open Energy Information

    Open Energy Info (EERE)

    National Jump to: navigation, search Name: Schneider National Place: Denver, CO Website: www.schneidernational.com References: Schneider National1 Information About Partnership...

  6. Property:OpenEI/UtilityRate/EnergyRateStructure/Tier5Rate | Open...

    Open Energy Info (EERE)

    Property Edit with form History Facebook icon Twitter icon Property:OpenEIUtilityRateEnergyRateStructureTier5Rate Jump to: navigation, search This is a property of type...

  7. Property:OpenEI/UtilityRate/DemandRateStructure/Tier1Rate | Open...

    Open Energy Info (EERE)

    Property Edit with form History Facebook icon Twitter icon Property:OpenEIUtilityRateDemandRateStructureTier1Rate Jump to: navigation, search This is a property of type...

  8. Property:OpenEI/UtilityRate/DemandRateStructure/Tier3Rate | Open...

    Open Energy Info (EERE)

    Property Edit with form History Facebook icon Twitter icon Property:OpenEIUtilityRateDemandRateStructureTier3Rate Jump to: navigation, search This is a property of type...

  9. Property:OpenEI/UtilityRate/EnergyRateStructure/Tier3Rate | Open...

    Open Energy Info (EERE)

    Property Edit with form History Facebook icon Twitter icon Property:OpenEIUtilityRateEnergyRateStructureTier3Rate Jump to: navigation, search This is a property of type...

  10. Property:OpenEI/UtilityRate/EnergyRateStructure/Tier4Rate | Open...

    Open Energy Info (EERE)

    Property Edit with form History Facebook icon Twitter icon Property:OpenEIUtilityRateEnergyRateStructureTier4Rate Jump to: navigation, search This is a property of type...