Powered by Deep Web Technologies
Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Manufactured Home Energy Audit user`s manual  

SciTech Connect (OSTI)

The Manufactured Home Energy Audit (MHEA) is a software tool that predicts manufactured home energy consumption and recommends weatherization retrofit measures. It was developed to assist local weatherization agencies working with the US Department of Energy (DOE) Weatherization Assistance Program. Whether new or experienced, employed within or outside the Weatherization Assistance Program, all users can benefit from incorporating MHEA into their manufactured home weatherization programs. DOE anticipates that the state weatherization assistance programs that incorporate MHEA into their programs will find significant growth in the energy and cost savings achieved from manufactured home weatherization. The easy-to-use MHEA displays a colorful, graphical interface for entering simple inputs and provides understandable, usable results. The user enters information about the manufactured home construction, heating equipment, cooling equipment, and weather site. MHEA then calculates annual energy consumption using a simplified building energy analysis technique. MHEA stands apart from other building energy analysis tools in many ways. Calculations incorporated into the computer code specifically address manufactured home heating and cooling load trends. The retrofit measures evaluated by MHEA are all applicable to manufactured homes. Help messages describe common manufactured home weatherization practices as well as provide hints on how to install retrofit measures. These and other features help make MHEA easy to use when evaluating energy consumption and the effects of weatherization retrofit measures for manufactured homes.

NONE

1997-09-01T23:59:59.000Z

2

2002 Manufacturing Energy Consumption Survey - User Needs Survey  

U.S. Energy Information Administration (EIA) Indexed Site

2002 Manufacturing Energy Consumption Survey: User-Needs Survey 2002 Manufacturing Energy Consumption Survey: User-Needs Survey View current results. We need your help in designing the next “ Energy Consumption Survey” (MECS)! As our valued customer, you are in an important position to tell us what kinds of data are most useful in helping you understand energy consumption in the U.S. manufacturing sector. Below is a short electronic survey with just a few questions. We will stop collecting responses for user feedback on May 17, 2002. This deadline serves to meet our intended release date of April/May 2003 for fielding MECS2002. The MECS is designed to produce estimates of energy consumption and other energy-related activities in manufacturing. The survey also collects information on energy expenditures, average prices, onsite generation of

3

Manufactured Home Energy Audit (MHEA)Users Manual (Version 7)  

SciTech Connect (OSTI)

The Manufactured Home Energy Audit (MHEA) is a software tool that predicts manufactured home energy consumption and recommends weatherization retrofit measures. It was developed to assist local weatherization agencies working with the U.S. Department of Energy (DOE) Weatherization Assistance Program. Whether new or experienced, employed within or outside the Weatherization Assistance Program, all users can benefit from incorporating MHEA into their manufactured home weatherization programs. DOE anticipates that the state weatherization assistance programs that incorporate MHEA into their programs will find significant growth in the energy and cost savings achieved from manufactured home weatherization. The easy-to-use MHEA uses a relatively standard Windows graphical interface for entering simple inputs and provides understandable, usable results. The user enters information about the manufactured home construction, heating equipment, cooling equipment appliances, and weather site. MHEA then calculates annual energy consumption using a simplified building energy analysis technique. Weatherization retrofit measures are evaluated based on the predicted energy savings after installation of the measure, the measure cost, and the measure life. Finally, MHEA recommends retrofit measures that are energy and cost effective for the particular home being evaluated. MHEA evaluates each manufactured home individually and takes into account local weather conditions, retrofit measure costs, and fuel costs. The recommended package of weatherization retrofit measures is tailored to the home being evaluated. More traditional techniques apply the same package of retrofit measures to all manufactured homes, often the same set of measures that are installed into site-built homes. Effective manufactured home weatherization can be achieved only by installing measures developed specifically for manufactured homes. The unique manufactured home construction characteristics require that each of these measures is evaluated separately in order to devise a package of measures that will result in high energy and dollar savings. MHEA stands apart from other building energy analysis tools in many ways. Calculations incorporated into the computer code specifically address manufactured home heating and cooling load trends. The retrofit measures evaluated by MHEA are all applicable to manufactured homes. Help messages describe common manufactured home weatherization practices as well as provide hints on how to install retrofit measures. These and other features help make MHEA easy to use when evaluating energy consumption and the effects of weatherization retrofit measures for manufactured homes. The National Renewable Energy Laboratory originally developed MHEA for the U.S. Department of Energy Weatherization Assistance Program. Conversion to a Windows-based program with additional modifications has been performed by the Oak Ridge National Laboratory. Many energy consumption and economic calculations resemble those found in the Computerized Instrumented Residential Audit written by Lawrence Berkeley National Laboratory and the National Energy Audit written by Oak Ridge National Laboratory. The calculations are similar in structure but have been altered to more accurately represent a manufactured home's unique energy use characteristics. Most importantly, MHEA helps meet the DOE Weatherization Assistance Program goals to increase client comfort and use federal dollars wisely.

Gettings, M.B.

2003-01-27T23:59:59.000Z

4

Understanding Manufacturing Systems with a Learning Historian for User-Directed Experimentation  

E-Print Network [OSTI]

a wide variety of important problems in manufacturing and other complex systems. In addition, simulation1 Understanding Manufacturing Systems with a Learning Historian for User-Directed Experimentation to improve user-directed experimentation with discrete event simulation models of manufacturing systems

Golbeck, Jennifer

5

Understanding Manufacturing Systems with a Learning Historian for UserDirected Experimentation  

E-Print Network [OSTI]

a wide variety of important problems in manufacturing and other complex systems. In addition, simulation1 Understanding Manufacturing Systems with a Learning Historian for User­Directed Experimentation to improve user­directed experimentation with discrete event simulation models of manufacturing systems

Golbeck, Jennifer

6

ALLAN, VERBEEK: RANKING USER-ANNOTATED IMAGES 1 Ranking user-annotated images for multiple  

E-Print Network [OSTI]

, for example, the user enters the search terms `cat' and `dog', we can quickly find potentially-relevant images, and that performance when searching for multiple terms can be increased by learning a new combined model and taking be increased by rejecting images from `untrustwor- thy' users. We focus on search queries for multiple terms

Paris-Sud XI, Université de

7

Grouping Parts for Multiple Parts Production in Additive Manufacturing  

Science Journals Connector (OSTI)

Abstract Rapid prototyping (RP) has evolved to Additive Manufacturing (AM) in recent years. It can produce functional or end-use parts with small or even medium quantities. And further, due to its unique layer-by-layer construction principle, it can produce different parts at the same time in a same AM machine. To improve the productivity and machine utilization of AM processes under multiple parts production context, this paper propose the conception of Grouping parts. Based on the Group Technology (GT) used in traditional processing technologies, a modified Group Technology for AM under multiple parts manufacturing context is presented. To group parts, a set of key attributes affecting the AM production time, cost, quality and work preparation are identified to represent the parts, and then a Grey Clustering method is adopted to conduct the similarity analysis. A simple case study is presented in the end to illustrate the proposed conception and its methodology.

Yicha Zhang; Alain Bernard

2014-01-01T23:59:59.000Z

8

Form EIA-3 Users Manual Quarterly Coal Consumption and Quality Report, Manufacturing and  

U.S. Energy Information Administration (EIA) Indexed Site

3 3 Users Manual Quarterly Coal Consumption and Quality Report, Manufacturing and Transformation/Processing Coal Plants and Commercial and Institutional Coal Users Document Number: 001 Version: 2.0 June 2011 1 June 2011 Document History Number Date Section Description 1 2 May 2011 June 2011 Document initiation. Revised screen shots and remove external user references. Primary POC: Tejasvi Raghuveer Phone: (202) 586-8926 Email: Tejasvi.Raghuveer@eia.gov Document Changes/Maintenance POC: Primary POC: Tejasvi Raghuveer Phone: (202) 586-8926 Email: Tejasvi.Raghuveer@eia.gov Project References: Coal Internet Data Collection (CIDC) User's Manual, September 2007

9

DOE Designated User Facilities Multiple Laboratories * ARM Climate Research Facility  

Broader source: Energy.gov (indexed) [DOE]

Designated User Facilities Designated User Facilities Multiple Laboratories * ARM Climate Research Facility Argonne National Laboratory * Advanced Photon Source (APS) * Electron Microscopy Center for Materials Research * Argonne Tandem Linac Accelerator System (ATLAS) * Center for Nanoscale Materials (CNM) * Argonne Leadership Computing Facility (ALCF) * Brookhaven National Laboratory * National Synchrotron Light Source (NSLS) * Accelerator Test Facility (ATF) * Relativistic Heavy Ion Collider (RHIC) * Center for Functional Nanomaterials (CFN) * National Synchrotron Light Source II (NSLS-II ) (under construction) Fermi National Accelerator Laboratory * Fermilab Accelerator Complex Idaho National Laboratory * Advanced Test Reactor ** * Wireless National User Facility (WNUF)

10

T-673: Apple Safari Multiple Flaws Let Remote Users Execute Arbitrary...  

Broader source: Energy.gov (indexed) [DOE]

Flaws Let Remote Users Execute Arbitrary Code, Conduct Cross-Site Scripting Attacks T-673: Apple Safari Multiple Flaws Let Remote Users Execute Arbitrary Code, Conduct...

11

T-536: Cisco ASA Multiple Flaws Let Remote Users Deny Service...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

36: Cisco ASA Multiple Flaws Let Remote Users Deny Service and Bypass Security Controls T-536: Cisco ASA Multiple Flaws Let Remote Users Deny Service and Bypass Security Controls...

12

U-133: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code  

Broader source: Energy.gov (indexed) [DOE]

33: Google Chrome Multiple Flaws Let Remote Users Execute 33: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code U-133: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code March 26, 2012 - 3:35am Addthis PROBLEM: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code PLATFORM: Google Chrome prior to 17.0.963.83 ABSTRACT: Multiple vulnerabilities were reported in Google Chrome. A remote user can cause arbitrary code to be executed on the target user's system. reference LINKS: SecurityTracker Alert ID: 1026841 CVE-2011-3049 Secunia Advisory SA48512 IMPACT ASSESSMENT: High Discussion: A remote user can create specially crafted content that, when loaded by the target user, will execute arbitrary code on the target system. The code will run with the privileges of the target user. A use-after-free may occur

13

U-143: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code  

Broader source: Energy.gov (indexed) [DOE]

3: Google Chrome Multiple Flaws Let Remote Users Execute 3: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code U-143: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code April 9, 2012 - 7:00am Addthis PROBLEM: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code PLATFORM: Version(s): prior to 18.0.1025.151 ABSTRACT: Multiple vulnerabilities were reported in Google Chrome. A remote user can cause arbitrary code to be executed on the target user's system. reference LINKS: SecurityTracker Alert ID: 1026892 CVE-2011-3066 Secunia Advisory SA48732 IMPACT ASSESSMENT: High Discussion: A remote user can create specially crafted content that, when loaded by the target user, will execute arbitrary code on the target system. The code will run with the privileges of the target user. An out-of-bounds memory

14

T-683:Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code  

Broader source: Energy.gov (indexed) [DOE]

83:Google Chrome Multiple Flaws Let Remote Users Execute 83:Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code T-683:Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code August 3, 2011 - 3:45pm Addthis PROBLEM: Multiple vulnerabilities were reported in Google Chrome. A remote user can cause arbitrary code to be executed on the target user's system. PLATFORM: Google Chrome prior to 13.0.782.107 ABSTRACT: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code. reference LINKS: Google Chrome advisory Update Chromium Security SecurityTracker Alert ID: 1025882 CVE-2011-2819 IMPACT ASSESSMENT: Medium Discussion: A remote user can create a specially crafted HTML that, when loaded by the target user, will execute arbitrary code on the target system. The code will run with the privileges of the target user.

15

T-673: Apple Safari Multiple Flaws Let Remote Users Execute Arbitrary Code,  

Broader source: Energy.gov (indexed) [DOE]

3: Apple Safari Multiple Flaws Let Remote Users Execute 3: Apple Safari Multiple Flaws Let Remote Users Execute Arbitrary Code, Conduct Cross-Site Scripting Attacks T-673: Apple Safari Multiple Flaws Let Remote Users Execute Arbitrary Code, Conduct Cross-Site Scripting Attacks July 21, 2011 - 1:27am Addthis PROBLEM: Multiple vulnerabilities were reported in Apple Safari. A remote user can cause arbitrary code to be executed on the target user's system. A remote user can conduct cross-site scripting attacks. A remote user can obtain potentially sensitive information. A remote user can bypass a certificate validation control. PLATFORM: Safari 5.1 and Safari 5.0.6 Products Affected: Safari 5 (Mac OS X 10.6), Safari 5 (Mac OS X 10.5), Product Security, Safari 5.1 (OS X Lion) ABSTRACT: Apple Safari Multiple Flaws Let Remote Users Execute Arbitrary Code,

16

U-170: Apple QuickTime Multiple Flaws Let Remote Users Execute Arbitrary  

Broader source: Energy.gov (indexed) [DOE]

70: Apple QuickTime Multiple Flaws Let Remote Users Execute 70: Apple QuickTime Multiple Flaws Let Remote Users Execute Arbitrary Code U-170: Apple QuickTime Multiple Flaws Let Remote Users Execute Arbitrary Code May 16, 2012 - 7:00am Addthis PROBLEM: Apple QuickTime Multiple Flaws Let Remote Users Execute Arbitrary Code PLATFORM: prior to 7.7.2 ABSTRACT: Multiple vulnerabilities were reported in Apple QuickTime. A remote user can cause arbitrary code to be executed on the target user's system. Reference LINKS: SecurityTracker Alert ID: 1027065 CVE-2012-0265 CVE-2012-0663 CVE-2012-0664 CVE-2012-0665 CVE-2012-0666 IMPACT ASSESSMENT: High Discussion: A remote user can create a specially crafted file that, when loaded by the target user, will execute arbitrary code on the target system. The code will run with the privileges of the target user. Only Windows-based systems

17

Learning at the boundary of the firm : learning-by-interaction between a manufacturer and its users  

E-Print Network [OSTI]

My dissertation centers on the very nature of the interaction and the learning that happens between users and manufacturers, and explores various micro-level mechanisms, which I call, "learning-by-interaction." The core ...

Bae, Sung Joo

2009-01-01T23:59:59.000Z

18

T-691: Adobe Flash Player Multiple Flaws Let Remote Users Execute Arbitrary  

Broader source: Energy.gov (indexed) [DOE]

1: Adobe Flash Player Multiple Flaws Let Remote Users Execute 1: Adobe Flash Player Multiple Flaws Let Remote Users Execute Arbitrary Code T-691: Adobe Flash Player Multiple Flaws Let Remote Users Execute Arbitrary Code August 11, 2011 - 3:00pm Addthis PROBLEM: Multiple vulnerabilities were reported in Adobe Flash Player. A remote user can cause arbitrary code to be executed on the target user's system. PLATFORM: Version(s): 10.3.181.36 and prior; 10.3.185.25 and prior for Android. ABSTRACT: Adobe Flash Player Multiple Flaws Let Remote Users Execute Arbitrary Code. reference LINKS: Security Bulletin: APSB11-21 SecurityTracker Alert ID: 1025907 CVE-2011-2425 IMPACT ASSESSMENT: High Discussion: A remote user can create specially crafted Flash content that, when loaded by the target user, will execute arbitrary code on the target system. The

19

U-213: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code  

Broader source: Energy.gov (indexed) [DOE]

U-213: Google Chrome Multiple Flaws Let Remote Users Execute U-213: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code U-213: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code July 16, 2012 - 7:00am Addthis PROBLEM: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code PLATFORM: Version(s): prior to 20.0.1132.57 ABSTRACT: Several vulnerabilities were reported in Google Chrome. reference LINKS: Stable Channel Update SecurityTracker Alert ID: 1027249 IMPACT ASSESSMENT: High Discussion: Several vulnerabilities were reported in Google Chrome. A remote user can cause arbitrary code to be executed on the target user's system. A remote user can create a specially crafted content that, when loaded by the target user, will execute arbitrary code on the target system. The code will run with the privileges of the target user.

20

U-184: Mozilla Firefox Multiple Bugs Let Remote Users Execute Arbitrary  

Broader source: Energy.gov (indexed) [DOE]

U-184: Mozilla Firefox Multiple Bugs Let Remote Users Execute U-184: Mozilla Firefox Multiple Bugs Let Remote Users Execute Arbitrary Code U-184: Mozilla Firefox Multiple Bugs Let Remote Users Execute Arbitrary Code June 6, 2012 - 7:00am Addthis PROBLEM: Multiple vulnerabilities were reported in Mozilla Firefox. PLATFORM: Version(s): prior to 13.0 ABSTRACT: A remote user can cause arbitrary code to be executed on the target user's system. A remote user can conduct cross-site scripting attacks. A remote user can obtain potentially sensitive information. Reference Links: Security Tracker ID 1027120 CVE-2012-0441,CVE-2012-1937 Vendor URL IMPACT ASSESSMENT: High Discussion: A remote user can create specially crafted content that, when loaded by the target user, will trigger a memory corruption error and execute arbitrary code on the target system [CVE-2012-1937 , CVE-2012-1938, CVE-2012-1939 ].

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

U-213: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code  

Broader source: Energy.gov (indexed) [DOE]

3: Google Chrome Multiple Flaws Let Remote Users Execute 3: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code U-213: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code July 16, 2012 - 7:00am Addthis PROBLEM: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code PLATFORM: Version(s): prior to 20.0.1132.57 ABSTRACT: Several vulnerabilities were reported in Google Chrome. reference LINKS: Stable Channel Update SecurityTracker Alert ID: 1027249 IMPACT ASSESSMENT: High Discussion: Several vulnerabilities were reported in Google Chrome. A remote user can cause arbitrary code to be executed on the target user's system. A remote user can create a specially crafted content that, when loaded by the target user, will execute arbitrary code on the target system. The code will run with the privileges of the target user.

22

U-160: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code  

Broader source: Energy.gov (indexed) [DOE]

60: Google Chrome Multiple Flaws Let Remote Users Execute 60: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code U-160: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code May 2, 2012 - 7:00am Addthis PROBLEM: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code PLATFORM: Prior to 18.0.1025.168 ABSTRACT: Several vulnerabilities were reported in Google Chrome. A remote user can cause arbitrary code to be executed on the target user's system reference LINKS: SecurityTracker Alert ID: 1027001 CVE-2011-3078 CVE-2011-3079 CVE-2011-3080 IMPACT ASSESSMENT: High Discussion: A remote user can create specially crafted content that, when loaded by the target user, will trigger a use-after-free, validation error, or race condition and execute arbitrary code on the target system. The code will

23

U-160: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code  

Broader source: Energy.gov (indexed) [DOE]

0: Google Chrome Multiple Flaws Let Remote Users Execute 0: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code U-160: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code May 2, 2012 - 7:00am Addthis PROBLEM: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code PLATFORM: Prior to 18.0.1025.168 ABSTRACT: Several vulnerabilities were reported in Google Chrome. A remote user can cause arbitrary code to be executed on the target user's system reference LINKS: SecurityTracker Alert ID: 1027001 CVE-2011-3078 CVE-2011-3079 CVE-2011-3080 IMPACT ASSESSMENT: High Discussion: A remote user can create specially crafted content that, when loaded by the target user, will trigger a use-after-free, validation error, or race condition and execute arbitrary code on the target system. The code will

24

U-077: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code  

Broader source: Energy.gov (indexed) [DOE]

7: Google Chrome Multiple Flaws Let Remote Users Execute 7: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code U-077: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code January 9, 2012 - 9:15am Addthis PROBLEM: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code PLATFORM: Version(s): prior to 16.0.912.75 ABSTRACT: A remote user may be able to execute arbitrary code on the target system. reference LINKS: Google Chrome Releases Chromium Security SecurityTracker Alert ID:1026487 IMPACT ASSESSMENT: High Discussion: A remote user can create specially crafted content that, when loaded by the target user, will execute arbitrary code on the target system. The code will run with the privileges of the target user. Specially crafted animation frames can trigger a use-after-free memory

25

T-574: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code  

Broader source: Energy.gov (indexed) [DOE]

74: Google Chrome Multiple Flaws Let Remote Users Execute 74: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code T-574: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code March 10, 2011 - 3:05pm Addthis PROBLEM: Multiple vulnerabilities were reported in Google Chrome. A remote user can cause arbitrary code to be executed on the target user's system. A remote user can bypass the pop-up blocker. PLATFORM: Google Chrome prior to 10.0.648.127 ABSTRACT: Multiple vulnerabilities have been reported in Google Chrome, where some have an unknown impact while others can be exploited by malicious people bypass certain security restrictions, disclose system information, and compromise a user's system. reference LINKS: Secunia Advisory: SA43683 Google Chrome Support Chrome Stable Release SecurityTracker Alert ID:1025181

26

Modeling user multiple interests by an improved GCS approach  

Science Journals Connector (OSTI)

User interest profile is the crucial component of most personalized recommender systems. The diversity and time-dependent evolving nature of user interests are creating difficulties in constructing and maintaining a sound user profile. This paper presents ... Keywords: Growing cell structures, Recommender systems, Self-organizing map, User interest profile

Wu Lihua; Liu Lu; Li Jing; Li Zongyong

2005-11-01T23:59:59.000Z

27

T-723:Adobe Flash Player Multiple Bugs Let Remote Users Obtain...  

Broader source: Energy.gov (indexed) [DOE]

Obtain Information, Conduct Cross-Site Scripting Attacks, and Execute Arbitrary Code T-723:Adobe Flash Player Multiple Bugs Let Remote Users Obtain Information, Conduct...

28

Multiple-objective Scheduling for the Hierarchical Control of Flexible Manufacturing Cells  

E-Print Network [OSTI]

Multiple-objective Scheduling for the Hierarchical Control of Flexible Manufacturing Cells (Revised level controller employs a combined priority rule to rank shop orders considering multiple scheduling the detailed schedule with projected order completion times back to the shop controller. Upon receiving

Nagi, Rakesh

29

V-035: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code  

Broader source: Energy.gov (indexed) [DOE]

5: Google Chrome Multiple Flaws Let Remote Users Execute 5: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code V-035: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code November 28, 2012 - 1:00am Addthis PROBLEM: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code PLATFORM: Version(s): prior to 23.0.1271.91 ABSTRACT: Several vulnerabilities were reported in Google Chrome. REFERENCE LINKS: Release updates from the Chrome team SecurityTracker Alert ID: 1027815 Secunia Advisory SA51437 CVE-2012-5130 CVE-2012-5131 CVE-2012-5132 CVE-2012-5133 CVE-2012-5134 CVE-2012-5135 CVE-2012-5136 IMPACT ASSESSMENT: High DISCUSSION: Several vulnerabilities were reported in Google Chrome. A remote user can cause arbitrary code to be executed on the target user's system. A remote user can create specially crafted content that, when loaded by the

30

V-066: Adobe Acrobat/Reader Multiple Flaws Lets Remote Users Execute  

Broader source: Energy.gov (indexed) [DOE]

6: Adobe Acrobat/Reader Multiple Flaws Lets Remote Users 6: Adobe Acrobat/Reader Multiple Flaws Lets Remote Users Execute Arbitrary Code and Local Users Gain Elevated Privileges V-066: Adobe Acrobat/Reader Multiple Flaws Lets Remote Users Execute Arbitrary Code and Local Users Gain Elevated Privileges January 10, 2013 - 2:00am Addthis PROBLEM: Adobe Acrobat/Reader Multiple Flaws Lets Remote Users Execute Arbitrary Code and Local Users Gain Elevated Privileges PLATFORM: *Adobe Reader XI (11.0.0) for Windows and Macintosh *Adobe Reader X (10.1.4) and earlier 10.x versions for Windows and Macintosh *Adobe Reader 9.5.2 and earlier 9.x versions for Windows and Macintosh *Adobe Reader 9.5.1 and earlier 9.x versions for Linux *Adobe Acrobat XI (11.0.0) for Windows and Macintosh *Adobe Acrobat X (10.1.4) and earlier 10.x versions for Windows and

31

U-079: Adobe Acrobat/Reader Multiple Bugs Let Remote Users Execute  

Broader source: Energy.gov (indexed) [DOE]

79: Adobe Acrobat/Reader Multiple Bugs Let Remote Users Execute 79: Adobe Acrobat/Reader Multiple Bugs Let Remote Users Execute Arbitrary Code U-079: Adobe Acrobat/Reader Multiple Bugs Let Remote Users Execute Arbitrary Code January 11, 2012 - 8:00am Addthis PROBLEM: Adobe Acrobat/Reader Multiple Bugs Let Remote Users Execute Arbitrary Code. PLATFORM: Adobe Acrobat/Reader Version(s): 9.x prior to 9.5, 10.x prior to 10.1.2 ABSTRACT: A remote user can create a file that, when loaded by the target user, will execute arbitrary code on the target user's system. reference LINKS: SecurityTracker Alert ID: 1026496 Adobe Security Bulletin APSB12-01 CVE-2011-2462, CVE-2011-4369, CVE-2011-4370, CVE-2011-4371, CVE-2011-4372, CVE-2011-4373. IMPACT ASSESSMENT: High Discussion: Several vulnerabilities were reported in Adobe Acrobat/Reader. A remote

32

V-035: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code  

Broader source: Energy.gov (indexed) [DOE]

5: Google Chrome Multiple Flaws Let Remote Users Execute 5: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code V-035: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code November 28, 2012 - 1:00am Addthis PROBLEM: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code PLATFORM: Version(s): prior to 23.0.1271.91 ABSTRACT: Several vulnerabilities were reported in Google Chrome. REFERENCE LINKS: Release updates from the Chrome team SecurityTracker Alert ID: 1027815 Secunia Advisory SA51437 CVE-2012-5130 CVE-2012-5131 CVE-2012-5132 CVE-2012-5133 CVE-2012-5134 CVE-2012-5135 CVE-2012-5136 IMPACT ASSESSMENT: High DISCUSSION: Several vulnerabilities were reported in Google Chrome. A remote user can cause arbitrary code to be executed on the target user's system. A remote user can create specially crafted content that, when loaded by the

33

U-277: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code  

Broader source: Energy.gov (indexed) [DOE]

7: Google Chrome Multiple Flaws Let Remote Users Execute 7: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code U-277: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code October 9, 2012 - 6:00am Addthis PROBLEM: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code PLATFORM: Version(s): prior to 22.0.1229.92 ABSTRACT: Several vulnerabilities were reported in Google Chrome. reference LINKS: SecurityTracker Alert ID: 1027617 Stable Channel Update CVE-2012-2900 CVE-2012-5108 CVE-2012-5109 CVE-2012-5110 CVE-2012-5111 IMPACT ASSESSMENT: High Discussion: A remote user can create specially crafted content that, when loaded by the target user, will execute arbitrary code on the target system. The code will run with the privileges of the target user. A crash may occur in Skia text rendering [CVE-2012-2900].

34

V-066: Adobe Acrobat/Reader Multiple Flaws Lets Remote Users Execute  

Broader source: Energy.gov (indexed) [DOE]

66: Adobe Acrobat/Reader Multiple Flaws Lets Remote Users 66: Adobe Acrobat/Reader Multiple Flaws Lets Remote Users Execute Arbitrary Code and Local Users Gain Elevated Privileges V-066: Adobe Acrobat/Reader Multiple Flaws Lets Remote Users Execute Arbitrary Code and Local Users Gain Elevated Privileges January 10, 2013 - 2:00am Addthis PROBLEM: Adobe Acrobat/Reader Multiple Flaws Lets Remote Users Execute Arbitrary Code and Local Users Gain Elevated Privileges PLATFORM: *Adobe Reader XI (11.0.0) for Windows and Macintosh *Adobe Reader X (10.1.4) and earlier 10.x versions for Windows and Macintosh *Adobe Reader 9.5.2 and earlier 9.x versions for Windows and Macintosh *Adobe Reader 9.5.1 and earlier 9.x versions for Linux *Adobe Acrobat XI (11.0.0) for Windows and Macintosh *Adobe Acrobat X (10.1.4) and earlier 10.x versions for Windows and

35

T-654: Apple QuickTime Multiple Bugs Let Remote Users Execute Arbitrary |  

Broader source: Energy.gov (indexed) [DOE]

4: Apple QuickTime Multiple Bugs Let Remote Users Execute 4: Apple QuickTime Multiple Bugs Let Remote Users Execute Arbitrary T-654: Apple QuickTime Multiple Bugs Let Remote Users Execute Arbitrary June 24, 2011 - 4:39am Addthis PROBLEM: A vulnerability was reported in QuickTime. A remote user can cause arbitrary code to be executed on the target user's system. PLATFORM: Version(s): prior to QuickTime 7.6.8 ABSTRACT: A remote user can create a specially crafted file that, when loaded by the target user, will execute arbitrary code on the target system. The code will run with the privileges of the target user. reference LINKS: SecurityTracker Alert ID: 1025705 Apple Security Article: HT4339 Apple Security Article: HT4723 Apple Security Article: HT1222 CVE-2011-0213 Secunia Advisory: SA45054 IMPACT ASSESSMENT High Discussion:

36

V-037: Wireshark Multiple Bugs Let Remote Users Deny Service | Department  

Broader source: Energy.gov (indexed) [DOE]

7: Wireshark Multiple Bugs Let Remote Users Deny Service 7: Wireshark Multiple Bugs Let Remote Users Deny Service V-037: Wireshark Multiple Bugs Let Remote Users Deny Service November 30, 2012 - 3:30am Addthis PROBLEM: Wireshark Multiple Bugs Let Remote Users Deny Service PLATFORM: Version(s): prior to 1.6.12, 1.8.4 ABSTRACT: Several vulnerabilities were reported in Wireshark. REFERENCE LINKS: Wireshark Security Advisories Secunia Advisory SA51422 Seclists SecurityTracker Alert ID: 1027822 CVE-2012-5592 CVE-2012-5593 CVE-2012-5594 CVE-2012-5595 CVE-2012-5596 CVE-2012-5597 CVE-2012-5598 CVE-2012-5599 CVE-2012-5600 CVE-2012-5601 CVE-2012-5602 IMPACT ASSESSMENT: Medium DISCUSSION: Several vulnerabilities were reported in Wireshark. A remote user can cause denial of service conditions. A user can obtain potentially sensitive information.

37

Manufacturing  

Office of Environmental Management (EM)

Flow of Materials through Industry Sustainable 1 Manufacturing 2 Technology Assessment 3 Contents 4 1. Introduction to the TechnologySystem ......

38

V-020: Apple QuickTime Multiple Flaws Let Remote Users Execute Arbitrary  

Broader source: Energy.gov (indexed) [DOE]

20: Apple QuickTime Multiple Flaws Let Remote Users Execute 20: Apple QuickTime Multiple Flaws Let Remote Users Execute Arbitrary Code V-020: Apple QuickTime Multiple Flaws Let Remote Users Execute Arbitrary Code November 9, 2012 - 6:00am Addthis PROBLEM: Apple QuickTime Multiple Flaws Let Remote Users Execute Arbitrary Code PLATFORM: Versions prior to QuickTime 7.7.3 are vulnerable on Windows 7, Vista and XP. ABSTRACT: Multiple vulnerabilities were reported in Apple QuickTime. REFERENCE LINKS: Apple Security Article: HT5581 SecurityTracker Alert ID: 1027737 Bugtraq ID: 56438 Secunia Advisory SA51226 CVE-2011-1374 CVE-2012-3751 CVE-2012-3752 CVE-2012-3753 CVE-2012-3754 CVE-2012-3755 CVE-2012-3756 CVE-2012-3757 CVE-2012-3758 IMPACT ASSESSMENT: High DISCUSSION: Multiple vulnerabilities have been reported in Apple QuickTime, which can

39

V-160: Wireshark Multiple Bugs Let Remote Users Deny Service | Department  

Broader source: Energy.gov (indexed) [DOE]

60: Wireshark Multiple Bugs Let Remote Users Deny Service 60: Wireshark Multiple Bugs Let Remote Users Deny Service V-160: Wireshark Multiple Bugs Let Remote Users Deny Service May 21, 2013 - 12:09am Addthis PROBLEM: Wireshark Multiple Bugs Let Remote Users Deny Service PLATFORM: Versions 1.8.0 to 1.8.6 ABSTRACT: Multiple vulnerabilities have been reported in Wireshark REFERENCE LINKS: Wireshark Docid: wnpa-sec-2013-23 Secunia Advisory SA53425 SecurityTracker Alert ID: 1028582 CVE-2013-2486 CVE-2013-2487 IMPACT ASSESSMENT: Medium DISCUSSION: Multiple vulnerabilities have been reported in Wireshark, which can be exploited by malicious people to cause a DoS (Denial of Service). 1) An error in the RELOAD dissector (dissectors/packet-reload.c) can be exploited to trigger infinite loops and consume CPU resources via specially

40

V-203: HP LoadRunner Multiple Bugs Let Remote Users Deny Service and  

Broader source: Energy.gov (indexed) [DOE]

3: HP LoadRunner Multiple Bugs Let Remote Users Deny Service 3: HP LoadRunner Multiple Bugs Let Remote Users Deny Service and Execute Arbitrary Code V-203: HP LoadRunner Multiple Bugs Let Remote Users Deny Service and Execute Arbitrary Code July 26, 2013 - 3:31am Addthis PROBLEM: A remote user can execute arbitrary code on the target system. A remote user can cause denial of service conditions. PLATFORM: HP LoadRunner prior to 11.52 ABSTRACT: Multiple vulnerabilities were reported in HP LoadRunner. REFERENCE LINKS: Security Tracker Alert ID: 1028833 CVE-2013-2368 CVE-2013-2369 CVE-2013-2370 CVE-2013-4797 CVE-2013-4798 CVE-2013-4799 CVE-2013-4800 CVE-2013-4801 IMPACT ASSESSMENT: Medium DISCUSSION: Potential security vulnerabilities have been identified with HP LoadRunner. The vulnerabilities could be remotely exploited to allow execution of code

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Cycle-to-cycle control of multiple input-multiple output manufacturing processes  

E-Print Network [OSTI]

In-process closed-loop control of many manufacturing processes is impractical owing to the impossibility or the prohibitively high cost of placing sensors and actuators necessary for in-process control. Such processes are ...

Rzepniewski, Adam K. (Adam Kamil), 1976-

2005-01-01T23:59:59.000Z

42

V-135: Cisco ASA Multiple Bugs Let Remote Users Deny Service | Department  

Broader source: Energy.gov (indexed) [DOE]

5: Cisco ASA Multiple Bugs Let Remote Users Deny Service 5: Cisco ASA Multiple Bugs Let Remote Users Deny Service V-135: Cisco ASA Multiple Bugs Let Remote Users Deny Service April 16, 2013 - 12:21am Addthis PROBLEM: Cisco ASA Multiple Bugs Let Remote Users Deny Service PLATFORM: Cisco ASA Software for Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, and Cisco ASA 1000V Cloud Firewall are affected by multiple vulnerabilities. Affected versions of Cisco ASA Software will vary depending on the specific vulnerability. ABSTRACT: Several vulnerabilities were reported in Cisco ASA. REFERENCE LINKS: Cisco Security Advisory Secunia Advisory SA52989 SecurityTracker Alert ID: 1028415 CVE-2013-1149 CVE-2013-1150 CVE-2013-1151 CVE-2013-1152

43

T-536: Cisco ASA Multiple Flaws Let Remote Users Deny Service and Bypass  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

36: Cisco ASA Multiple Flaws Let Remote Users Deny Service and 36: Cisco ASA Multiple Flaws Let Remote Users Deny Service and Bypass Security Controls T-536: Cisco ASA Multiple Flaws Let Remote Users Deny Service and Bypass Security Controls January 18, 2011 - 2:30pm Addthis PROBLEM: Cisco ASA Multiple Flaws Let Remote Users Deny Service and Bypass Security Controls. PLATFORM: Cisco 5500 Series Adaptive Security Appliances (ASA) ABSTRACT: Cisco ASA 5500 Series Adaptive Security Appliances are affected by multiple vulnerabilities. Affected versions of Cisco ASA Software vary depending on the specific vulnerability. Cisco ASA 5500 Series Adaptive Security Appliances may experience a TCP connection exhaustion condition (no new TCP connections are accepted) that can be triggered through the receipt of specific TCP segments during the

44

V-035: Google Chrome Multiple Flaws Let Remote Users Execute...  

Broader source: Energy.gov (indexed) [DOE]

of the target user. An out-of-bounds read may occur in Skia CVE-2012-5130. A memory corruption error may occur in the Apple OSX driver for Intel GPUs CVE-2012-5131. A...

45

V-029: Mozilla Firefox Multiple Bugs Let Remote Users Execute...  

Broader source: Energy.gov (indexed) [DOE]

that, when loaded by the target user, will trigger a buffer overflow, use-after-free memory error, or memory corruption error and execute arbitrary code on the target system. The...

46

Manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Manufacturing Manufacturing DUF6 Health Risks line line Accidents Storage Conversion Manufacturing Disposal Transportation Manufacturing of Products Containing Depleted Uranium Discussion of risks and possible impacts associated with fabrication of representative products containing depleted uranium. Beneficial Uses Risk Evaluation The Department has initiated the Depleted Uranium Uses Research and Development Program to explore the potential beneficial uses of the depleted uranium (DU), fluorine, and empty carbon steel DUF6 storage cylinders for effective use of resources and to achieve cost savings to the government. A number of tasks have been initiated related to uses of DU as a shielding material, catalyst, and as a semi-conductor material in electronic devices. An evaluation of the risks associated with the release

47

T-723:Adobe Flash Player Multiple Bugs Let Remote Users Obtain Information,  

Broader source: Energy.gov (indexed) [DOE]

3:Adobe Flash Player Multiple Bugs Let Remote Users Obtain 3:Adobe Flash Player Multiple Bugs Let Remote Users Obtain Information, Conduct Cross-Site Scripting Attacks, and Execute Arbitrary Code T-723:Adobe Flash Player Multiple Bugs Let Remote Users Obtain Information, Conduct Cross-Site Scripting Attacks, and Execute Arbitrary Code September 22, 2011 - 8:00am Addthis PROBLEM: Adobe Flash Player Multiple Bugs Let Remote Users Obtain Information, Conduct Cross-Site Scripting Attacks, and Execute Arbitrary Code. PLATFORM: Adobe Flash Player 10.3.183.7 and earlier versions for Windows, Macintosh, Linux and Solaris. Adobe Flash Player 10.3.186.6 and earlier versions for Android. ABSTRACT: An attacker can exploit this issue by enticing an unsuspecting victim into visiting a malicious website. reference LINKS: Adobe Security Bulletin

48

U-176: Wireshark Multiple Bugs Let Remote Users Deny Service | Department  

Broader source: Energy.gov (indexed) [DOE]

U-176: Wireshark Multiple Bugs Let Remote Users Deny Service U-176: Wireshark Multiple Bugs Let Remote Users Deny Service U-176: Wireshark Multiple Bugs Let Remote Users Deny Service May 24, 2012 - 7:00am Addthis PROBLEM: Wireshark Multiple Bugs Let Remote Users Deny Service PLATFORM: 1.4.0 to 1.4.12, 1.6.0 to 1.6.7 ABSTRACT: Several vulnerabilities were reported in Wireshark. A remote user can cause denial of service conditions. Reference Links: SecurityTracker Alert ID: 1027094 CVE-2012-2392 CVE-2012-2393 CVE-2012-2394 IMPACT ASSESSMENT: Medium Discussion: A remote user can send specially crafted ANSI MAP, ASF, BACapp, Bluetooth HCI, IEEE 802.11, IEEE 802.3, LTP, and R3 data to cause Wireshark to hang or enter an infinite loop. A remote user can cause the DIAMETER dissector to crash. A remote user can trigger a memory error on SPARC or Itanium processors and

49

T-636: Wireshark Multiple Flaws Let Remote Users Deny Service | Department  

Broader source: Energy.gov (indexed) [DOE]

T-636: Wireshark Multiple Flaws Let Remote Users Deny Service T-636: Wireshark Multiple Flaws Let Remote Users Deny Service T-636: Wireshark Multiple Flaws Let Remote Users Deny Service June 3, 2011 - 3:35pm Addthis PROBLEM: Wireshark Multiple Flaws Let Remote Users Deny Service PLATFORM: Wireshark Version(s): 1.2.0 to 1.2.16, 1.4.0 to 1.4.6 ABSTRACT: Multiple vulnerabilities were reported in Wireshark. A remote user can cause denial of service conditions. reference LINKS: wnpa-sec-2011-07 SecurityTracker Alert ID: 1025597 wnpa-sec-2011-08 IMPACT ASSESSMENT: High Discussion: A remote user can send specially crafted DICOM data, Visual Networks file, compressed capture data, snoop file, or Diameter dictionary file to cause the target service to crash or enter an infinite loop. Versions affected: 1.2.0 to 1.2.16 and 1.4.0 to 1.4.6.

50

V-164: Apple QuickTime Multiple Flaws Let Remote Users Execute Arbitrary  

Broader source: Energy.gov (indexed) [DOE]

4: Apple QuickTime Multiple Flaws Let Remote Users Execute 4: Apple QuickTime Multiple Flaws Let Remote Users Execute Arbitrary Code V-164: Apple QuickTime Multiple Flaws Let Remote Users Execute Arbitrary Code May 27, 2013 - 12:23am Addthis PROBLEM: Apple QuickTime Multiple Flaws Let Remote Users Execute Arbitrary Code PLATFORM: Apple QuickTime prior to 7.7.4. ABSTRACT: Apple QuickTime Multiple Vulnerabilities REFERENCE LINKS: Apple Article: HT5770 SecurityTracker Alert ID: 1028589 Secunia Advisory SA53520 CVE-2013-0986, CVE-2013-0987, CVE-2013-0988 CVE-2013-0989, CVE-2013-1015, CVE-2013-1016 CVE-2013-1017, CVE-2013-1018, CVE-2013-1019 CVE-2013-1020, CVE-2013-1021, CVE-2013-1022 IMPACT ASSESSMENT: High DISCUSSION: Multiple vulnerabilities have been reported in Apple QuickTime, which can be exploited by malicious people to compromise a user's system.

51

T-718:Adobe Acrobat/Reader Multiple Bugs Let Remote Users Execute Arbitrary  

Broader source: Energy.gov (indexed) [DOE]

8:Adobe Acrobat/Reader Multiple Bugs Let Remote Users Execute 8:Adobe Acrobat/Reader Multiple Bugs Let Remote Users Execute Arbitrary Code T-718:Adobe Acrobat/Reader Multiple Bugs Let Remote Users Execute Arbitrary Code September 15, 2011 - 8:45am Addthis PROBLEM: Adobe Acrobat/Reader Multiple Bugs Let Remote Users Execute Arbitrary Code. PLATFORM: Adobe Reader X (10.1) and earlier 10.x versions for Windows and Macintosh Adobe Reader 9.4.5 and earlier 9.x versions for Windows, Macintosh and UNIX Adobe Reader 8.3 and earlier 8.x versions for Windows and Macintosh Adobe Acrobat X (10.1) and earlier 10.x versions for Windows and Macintosh Adobe Acrobat 9.4.5 and earlier 9.x versions for Windows and Macintosh Adobe Acrobat 8.3 and earlier 8.x versions for Windows and Macintosh ABSTRACT: A remote user can create a file that, when loaded by the target user, will

52

V-029: Mozilla Firefox Multiple Bugs Let Remote Users Execute Arbitrary  

Broader source: Energy.gov (indexed) [DOE]

29: Mozilla Firefox Multiple Bugs Let Remote Users Execute 29: Mozilla Firefox Multiple Bugs Let Remote Users Execute Arbitrary Code and Conduct Cross-Site Scripting Attacks V-029: Mozilla Firefox Multiple Bugs Let Remote Users Execute Arbitrary Code and Conduct Cross-Site Scripting Attacks November 21, 2012 - 2:00am Addthis PROBLEM: Mozilla Firefox Multiple Bugs Let Remote Users Execute Arbitrary Code and Conduct Cross-Site Scripting Attacks PLATFORM: Version(s): prior to 17.0 ABSTRACT: Multiple vulnerabilities were reported in Mozilla Firefox REFERENCE LINKS: Mozilla Foundation Security Advisories Bugtraq ID: 55260 SecurityTracker Alert ID: 1027791 CVE-2012-4201, CVE-2012-4202, CVE-2012-4203, CVE-2012-4204, CVE-2012-4205, CVE-2012-4206, CVE-2012-4207,CVE-2012-4208, CVE-2012-4209, CVE-2012-4210, CVE-2012-4212, CVE-2012-4213, CVE-2012-4214, CVE-2012-4215, CVE-2012-4216,

53

STOMP Subsurface Transport Over Multiple Phases, Version 4.0, Users Guide  

SciTech Connect (OSTI)

This guide describes the general use, input file formatting, compilation and execution of the STOMP (Subsurface Transport Over Multiple Phases) simulator, a scientific tool for analyzing single and multiple phase subsurface flow and transport. A description of the simulators governing equations, constitutive functions and numerical solution algorithms are provided in a companion theory guide. In writing these guides for the STOMP simulator, the authors have assumed that the reader comprehends concepts and theories associated with multiple-phase hydrology, heat transfer, thermodynamics, radioactive chain decay, and relative permeability-saturation-capillary pressure constitutive relations. The authors further assume that the reader is familiar with the computing environment on which they plan to compile and execute the STOMP simulator. Source codes for the sequential versions of the simulator are available in pure FORTRAN 77 or mixed FORTRAN 77/90 forms. The pure FORTRAN 77 source code form requires a parameters file to define the memory requirements for the array elements. The mixed FORTRAN 77/90 form of the source code uses dynamic memory allocation to define memory requirements, based on a FORTRAN 90 preprocessor STEP, that reads the input files. The simulator utilizes a variable source code configuration, which allows the execution memory and speed to be tailored to the problem specifics, and essentially requires that the source code be assembled and compiled through a software maintenance utility. The memory requirements for executing the simulator are dependent on the complexity of physical system to be modeled and the size and dimensionality of the computational domain. Likewise execution speed depends on the problem complexity, size and dimensionality of the computational domain, and computer performance. Selected operational modes of the STOMP simulator are available for scalable execution on multiple processor (i.e., parallel) computers. These versions of the simulator are written in pure FORTRAN 90 with imbedded directives that are interpreted by a FORTRAN preprocessor. Without the preprocessor, the scalable version of the simulator can be executed sequentially on a single processor computer. The scalable versions of the STOMP modes carry the -Sc designator on the operational mode name. For example, STOMP-WCS-Sc is the scalable version of the STOMP-WCS (Water-CO2-Salt) mode. A separate mode containing an evaporation model as a boundary condition on the upper surface of the computation domain has also been included. This mode, STOMP-WAE-B (Water-Air-Energy-Barriers) can be viewed as an extension of the STOMP-WAE (Water-Air-Energy) mode. Details of this particular mode are outlined by Ward et al. (2005)(a). STOMP V4.0 includes the reactive transport module ECKEChem (Equilibrium-Conservation-Kinetic Equation Chemistry) for the STOMP-W (Water) and STOMP-WCS (Water-CO2-Salt) modes. For this particular module, the -R designator is included in the operational mode name (e.g., STOMP-W-R, STOMP-WCS-R-Sc). This mode is described in detail by White and McGrail (2005)(b). For all operational modes and processor implementations, the memory requirements for executing the simulator are dependent on the complexity of physical system to be modeled and the size and dimensionality of the computational domain. Likewise execution speed depends on the problem complexity, size and dimensionality of the computational domain, and computer performance. Additional information about the simulator can be found on the STOMP webpage: http://stomp.pnl.gov. The website includes an introductory short course with problems ranging from simple one-dimensional saturated flow to complex multiphase system computations.

White, Mark D.; Oostrom, Martinus

2006-06-09T23:59:59.000Z

54

Spectrum auction with interference constraint for cognitive radio networks with multiple primary and secondary users  

E-Print Network [OSTI]

Spectrum auction with interference constraint for cognitive radio networks with multiple primary shown the benefits of cognitive radio technologies to improve the flexibility and efficiency of spectrum (SUs) to share the available spectrum of licensed primary users (PUs) fairly and efficiently, subject

Coupechoux, Marceau

55

HTTP TRAFFIC SIMULATION AND EVALUATION FOR MULTIPLE USERS IN AN INTRANET NETWORK  

E-Print Network [OSTI]

"friendly" environment. In our application we use a mechanism exploiting Intranet technology to stressHTTP TRAFFIC SIMULATION AND EVALUATION FOR MULTIPLE USERS IN AN INTRANET NETWORK Elias Aravantinos Christos Bouras Petros Ganos Panagiotis Kokkinos Research Academic Computer Technology Institute Computer

Bouras, Christos

56

U-004:Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code  

Broader source: Energy.gov [DOE]

A remote user can create HTML that, when loaded by the target user, will execute arbitrary code on the target user's system.

57

Fuzzy multiple goal programming applied to TFT-LCD supplier selection by downstream manufacturers  

Science Journals Connector (OSTI)

In today's highly competitive environment, a good supply chain relationship is essential for a company to survive and to acquire reasonable profit. While a few large companies may be able to vertically integrate from the design stage to the final distribution ... Keywords: Fuzzy analytic hierarchy process, Fuzzy multiple goal programming, Performance, Supplier selection, TFT-LCD

Amy H. I. Lee; He-Yau Kang; Ching-Ter Chang

2009-04-01T23:59:59.000Z

58

V-066: Adobe Acrobat/Reader Multiple Flaws Lets Remote Users...  

Broader source: Energy.gov (indexed) [DOE]

and compromise a user's system. 1) An unspecified error can be exploited to corrupt memory. 2) Some unspecified errors can be exploited to corrupt memory. 3) Another unspecified...

59

Laser Technology: Additive Manufacturing  

Science Journals Connector (OSTI)

Selective Laser Sintering, and in general Additive Manufacturing Processes are becoming mature technologies; in the ... systems that are even utilized for direct parts manufacturing. However, the parts final user...

Srichand Hinduja; Lin Li

2013-01-01T23:59:59.000Z

60

V-203: HP LoadRunner Multiple Bugs Let Remote Users Deny Service...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

system. SOLUTION: The vendor has issued a fix(11.52) Addthis Related Articles V-113: Apple Safari Bugs Let Remote Users Execute Arbitrary Code V-171: Apple Safari Bugs Let...

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Manufacturing Consumption of Energy 1994  

Gasoline and Diesel Fuel Update (EIA)

Energy Information Administration/Manufacturing Consumption of Energy 1994 Energy Information Administration/Manufacturing Consumption of Energy 1994 Introduction The market for natural gas has been changing for quite some time. As part of natural gas restructuring, gas pipelines were opened to multiple users. Manufacturers or their representatives could go directly to the wellhead to purchase their natural gas, arrange the transportation, and have the natural gas delivered either by the local distribution company or directly through a connecting pipeline. More recently, the electricity markets have been undergoing change. When Congress passed the Energy Policy Act of 1992, requirements were included not only to open access to the ownership of electricity generation, but also to open access to the transmission lines so that wholesale trade in electricity would be possible. Now several States, including California and

62

Centroidbased summarization of multiple documents: sentence extraction, utilitybased evaluation, and user studies  

E-Print Network [OSTI]

Centroid­based summarization of multiple documents: sentence extraction, utility­based evaluation.ibm.com Abstract We present a multi­document summarizer, called MEAD, which generates summaries using cluster centroids produced by a topic detection and tracking system. We also describe two new techniques, based

Radev, Dragomir R.

63

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Manufacturing Information Integration & Infrastructure Manufacturing Information Integration & Infrastructure PDF format (47 kb) The Information Infrastructure Team in the Computer Applications for Manufacturing organization can provide programming and analysis support for information applications for manufacturing. The Team works closely with customers to help them define their requirements. The Team's experience and expertise can help your manufacturing information needs. Capabilities Provide computer hardware and software standards that directly support the seamless manufacturing initiative. Develop graphical user interfaces (GUI) for applications using the proprietary Windows environment or an open system design using Web servers and client browsers. Provide computer hardware support, including all personal computer

64

MDF | Manufacturing Demonstration Facility | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

BTRIC CNMS CSMB CFTF HFIR MDF Working with MDF NTRC OLCF SNS Titanium robotic hand holding sphere fabricated using additive manufacturing Home | User Facilities | MDF MDF | Manufacturing Demonstration Facility SHARE As the nation's premier research laboratory, ORNL is one of the world's most capable resources for transforming the next generation of scientific discovery into solutions for rebuilding and revitalizing America's manufacturing industries. Manufacturing industries engage ORNL's expertise in materials synthesis, characterization, and process technology to reduce technical risk and validate investment for innovations targeting products of the future. DOE's Manufacturing Demonstration Facility, established at ORNL, helps industry adopt new manufacturing technologies to reduce life-cycle energy

65

MDF | Manufacturing Demonstration Facility | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Working with MDF Working with MDF Titanium robotic hand holding sphere fabricated using additive manufacturing Home | User Facilities | MDF MDF | Manufacturing Demonstration Facility SHARE As the nation's premier research laboratory, ORNL is one of the world's most capable resources for transforming the next generation of scientific discovery into solutions for rebuilding and revitalizing America's manufacturing industries. Manufacturing industries engage ORNL's expertise in materials synthesis, characterization, and process technology to reduce technical risk and validate investment for innovations targeting products of the future. DOE's Manufacturing Demonstration Facility, established at ORNL, helps industry adopt new manufacturing technologies to reduce life-cycle energy

66

Manufacturing Glossary  

Gasoline and Diesel Fuel Update (EIA)

Energy Efficiency Web Site. If you need assistance in viewing this page, please call (202) 586-8800 Energy Efficiency Web Site. If you need assistance in viewing this page, please call (202) 586-8800 Home > Energy Users > Energy Efficiency Page > Glossary for the Manufacturing Sector Glossary For the Manufacturing Sector Barrel: A volumetric unit of measure equivalent to 42 U.S. gallons. Biomass: Organic nonfossil material of biological origin constituting a renewable energy source. Blast Furnace: A shaft furnace in which solid fuel (coke) is burned with an air blast to smelt ore in a continuous operation. Blast Furnace Gas: The waste combustible gas generated in a blast furnace when iron ore is being reduced with coke to metallic iron. It is commonly used as a fuel within the steel works. Boiler Fuel: An energy source to produce heat that is transferred to the boiler vessel in order to generate steam or hot water. Fossil fuels are the primary energy sources used to produce heat for boilers.

67

User Facilities | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

USER PORTAL USER PORTAL BTRICBuilding Technologies Research Integration Center CNMSCenter for Nanophase Materials Sciences CSMBCenter for Structural Molecular Biology CFTFCarbon Fiber Technology Facility HFIRHigh Flux Isotope Reactor MDF Manufacturing Demonstration Facility NTRCNational Transportation Research Center OLCFOak Ridge Leadership Computing Facility SNSSpallation Neutron Source Keeping it fresh at the Spallation Neutron Source Nanophase material sciences' nanotech toolbox Home | User Facilities SHARE ORNL User Facilities ORNL is home to a number of highly sophisticated experimental user facilities that provide unmatched capabilities to the broader scientific community, including a growing user community from universities, industry, and other laboratories research institutions, as well as to ORNL

68

Users from Industry  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Users from Industry Users from Industry Users from Industry Print The Advanced Light Source (ALS) welcomes industrial users from large and small companies whose projects advance scientific knowledge, investigate the development of new products and manufacturing methods, or provide economic benefits and jobs to the economy. The nature of industrial research can be different from traditional university and government sponsored projects, so the ALS has created unique opportunities for new and existing industrial users to access our user facilities and engage in productive relationships with our scientific and engineering staff. Examples of past and current research conducted at the ALS can be viewed on the Industry @ ALS Web page. There are several modes of access; the ALS User and Scientific Support Groups are especially committed to helping new industrial users gain a foothold in our user community and welcome inquiries about how to make that happen.

69

A National Strategic Plan For Advanced Manufacturing  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

across hundreds of sites and thousands of users through conventional social network media and (2) deploy digitally programmable manufacturing equipment to 1,000 high schools....

70

Users from Industry  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Users from Industry Print Users from Industry Print The Advanced Light Source (ALS) welcomes industrial users from large and small companies whose projects advance scientific knowledge, investigate the development of new products and manufacturing methods, or provide economic benefits and jobs to the economy. The nature of industrial research can be different from traditional university and government sponsored projects, so the ALS has created unique opportunities for new and existing industrial users to access our user facilities and engage in productive relationships with our scientific and engineering staff. Examples of past and current research conducted at the ALS can be viewed on the Industry @ ALS Web page. There are several modes of access; the ALS User and Scientific Support Groups are especially committed to helping new industrial users gain a foothold in our user community and welcome inquiries about how to make that happen.

71

Shifting Innovation to Users Via Toolkits  

E-Print Network [OSTI]

In the traditional new product development process, manufacturers first explore user needs and then develop responsive products. Developing an accurate understanding of ...

Katz, Ralph

2002-06-07T23:59:59.000Z

72

Manufacturing News  

Broader source: Energy.gov (indexed) [DOE]

news Office of Energy Efficiency & news Office of Energy Efficiency & Renewable Energy Forrestal Building 1000 Independence Avenue, SW Washington, DC 20585 en FACTSHEET: Next Generation Power Electronics Manufacturing Innovation Institute http://energy.gov/articles/factsheet-next-generation-power-electronics-manufacturing-innovation-institute manufacturing-innovation-institute" class="title-link">FACTSHEET: Next Generation Power Electronics Manufacturing Innovation Institute

73

Design for manufacturability Design verification  

E-Print Network [OSTI]

ITRS Design #12;Design · Design for manufacturability · Design verification #12;Design for Manufacturability · Architecture challenges · Logic and circuit challenges · Layout and physical design challenges · Expected to be the source of multiple DFM challenges · Invest in variability reduction or design

Patel, Chintan

74

Laser and Intelligent Energy Field Manufacturing  

Science Journals Connector (OSTI)

Laser has demonstrated many important applications, including machining, welding, surface treating, additive manufacturing etc. Multiple hybrid processes had been developed, including...

Zhang, Wenwu

75

Manufacturing technology  

SciTech Connect (OSTI)

The specific goals of the Manufacturing Technology thrust area are to develop an understanding of fundamental fabrication processes, to construct general purpose process models that will have wide applicability, to document our findings and models in journals, to transfer technology to LLNL programs, industry, and colleagues, and to develop continuing relationships with industrial and academic communities to advance our collective understanding of fabrication processes. Advances in four projects are described here, namely Design of a Precision Saw for Manufacturing, Deposition of Boron Nitride Films via PVD, Manufacturing and Coating by Kinetic Energy Metallization, and Magnet Design and Application.

Blaedel, K.L.

1997-02-01T23:59:59.000Z

76

Prospective Users  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Prospective Users Prospective Users Prospective Users Print The Advanced Light Source (ALS) welcomes researchers from universities, government labs, and industry who are interested in performing experiments at the general sciences and structural biology beamlines open to users. An overview of user opportunities, and the procedures to become a user, are outlined below: What is an ALS User? Research Facilities Available to Users Costs to Users Users from Industry User Policy How to Become an ALS User What is an ALS User? The ALS is a third generation synchrotron light source, providing over 35 beamlines, where samples may be illuminated with x-ray, ultraviolet or infrared light to explore the structure and electronic properties of materials. The ALS operates as a national user facility, and is open to researchers worldwide to submit proposals for research.

77

Additive Manufacturing: Implications on Research and Manufacturing  

E-Print Network [OSTI]

Additive Manufacturing: Implications on Research and Manufacturing With recent developments, etc.), additive manufacturing (AM) has the potential to become a transformative technology in innovation-based manufacturing. Agencies such as the Department of Defense, the National Science Foundation

Crawford, T. Daniel

78

Additive Manufacturing : Changing the Rules of Manufacturing  

Science Journals Connector (OSTI)

Aspects of 3D printing and additive or layer manufacturing can be treated as modular manufacturing or modular components of manufacturing in the contemporary sense. Such modular manufacturing involves specialized...

2014-06-01T23:59:59.000Z

79

Prospective Users  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Prospective Users Print Prospective Users Print The Advanced Light Source (ALS) welcomes researchers from universities, government labs, and industry who are interested in performing experiments at the general sciences and structural biology beamlines open to users. An overview of user opportunities, and the procedures to become a user, are outlined below: What is an ALS User? Research Facilities Available to Users Costs to Users Users from Industry User Policy How to Become an ALS User What is an ALS User? The ALS is a third generation synchrotron light source, providing over 35 beamlines, where samples may be illuminated with x-ray, ultraviolet or infrared light to explore the structure and electronic properties of materials. The ALS operates as a national user facility, and is open to researchers worldwide to submit proposals for research.

80

Manufacturing Demonstration Facility (MDF) | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing Demonstration Facility (MDF) Manufacturing Demonstration Facility (MDF) Manufacturing Demonstration Facility (MDF) October 11, 2013 - 9:44am Addthis The Manufacturing Demonstration Facility (MDF) is a collabora-tive manufacturing community that shares a common RD&D infrastructure. This shared infrastructure provides affordable access to advanced physical and virtual tools for rapidly demonstrating new manufacturing technologies and optimizing critical processes. Oak Ridge National Laboratory is home to AMO's MDF focused on Additive Manufacturing and Low-cost Carbon Fiber. Fostering Collaboration to Accelerate Progress Work conducted by MDF partners and users provides real data that is used to reduce the technical risk associated with full commercialization of promising foundational manufacturing process and materials innovations. The

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

User Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Contacts for Users Contacts for Users User Services Print The User Services Group is available to aid ALS users before they arrive, while they are here, and after they leave. User Office Experiment Coordination Section Sue Bailey This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Services Group Leader Prospective users Proprietary users Tel: 510-486-7727 ALS User Office The User Office is located on the mezzanine of Building 6 (the ALS), Room 2212. Contact Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 Fax: 510-486-4773 Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Hours User Office: Monday-Friday 8.00 a.m. - 12.00 p.m. and 1.00 p.m. - 5.00 p.m.

82

Zimbra for APS Users  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Calendar Calendar Zimbra Calendar  ZWC Benefits: - Usable lab-wide, can schedule meetings with users and rooms outside APS - User friendly  Each Zimbra user has a personal calendar - Users migrated from Sun Calendar System optionally elected to migrate data from their personal calendar  With Zimbra, calendar terminology: - Appointments - Events - Meetings  Users can: - Create appointments - Create recurring events - Schedule all day events - Accept/Tentative/Reject an invitation with one click - Create additional calendars - Share their calendars with other users on and off-site - Delegate calendar management - Accept calendar shares - View calendar in various ways and print - Use color for quick calendar recognition - Schedule meetings * View multiple calendars to see potential scheduling

83

Manufacturer-to-Retailer versus Manufacturer-to-Consumer Rebates in a Supply Chain  

E-Print Network [OSTI]

Manufacturer-to-Retailer versus Manufacturer-to-Consumer Rebates in a Supply Chain Goker Aydin rebates and retail pricing. The demand uncertainty is multiplicative, and the expected demand depends on the effective (retail) price of the product. A retailer rebate goes from the manufacturer to the retailer

Aydin, Goker

84

Fuel Cell Manufacturing: American Energy and Manufacturing Competitive...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit Presentation on...

85

User Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Home Contact Home Contact User Services Print The User Services Group is available to aid ALS users before they arrive, while they are here, and after they leave. User Office Experiment Coordination Section Sue Bailey This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Services Group Leader Prospective users Proprietary users Tel: 510-486-7727 ALS User Office The User Office is located on the mezzanine of Building 6 (the ALS), Room 2212. Contact Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 Fax: 510-486-4773 Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Hours User Office: Monday-Friday 8.00 a.m. - 12.00 p.m. and 1.00 p.m. - 5.00 p.m.

86

Manufacturing Perspective  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

EOT_RT_Sub_Template.ppt | 1/6/2009 | 1 EOT_RT_Sub_Template.ppt | 1/6/2009 | 1 BOEING is a trademark of Boeing Management Company. Copyright © 2009 Boeing. All rights reserved. Compressed Hydrogen Storage Workshop Manufacturing Perspective Karl M. Nelson (karl.m.nelson@boeing.com) Boeing Research & Technology Engineering, Operations & Technology | Boeing Research & Technology Materials & Fabrication Technology EOT_RT_Sub_Template.ppt | 1/12/2009 | Structural Tech 2 Copyright © 2009 Boeing. All rights reserved. DOE Hydrogen Program Development of Advanced Manufacturing Technologies for Low Cost Hydrogen Storage Vessels Mark Leavitt, Alex Ly Quantum Fuel Systems Technologies Worldwide Inc. Karl Nelson, Brice Johnson The Boeing Company Ken Johnson, Kyle Alvine, Stan Pitman, Michael Dahl, Daryl Brown

87

Green Manufacturing  

SciTech Connect (OSTI)

Green Manufacturing Initiative (GMI): The initiative provides a conduit between the university and industry to facilitate cooperative research programs of mutual interest to support green (sustainable) goals and efforts. In addition to the operational savings that greener practices can bring, emerging market demands and governmental regulations are making the move to sustainable manufacturing a necessity for success. The funding supports collaborative activities among universities such as the University of Michigan, Michigan State University and Purdue University and among 40 companies to enhance economic and workforce development and provide the potential of technology transfer. WMU participants in the GMI activities included 20 faculty, over 25 students and many staff from across the College of Engineering and Applied Sciences; the College of Arts and Sciences' departments of Chemistry, Physics, Biology and Geology; the College of Business; the Environmental Research Institute; and the Environmental Studies Program. Many outside organizations also contribute to the GMI's success, including Southwest Michigan First; The Right Place of Grand Rapids, MI; Michigan Department of Environmental Quality; the Michigan Department of Energy, Labor and Economic Growth; and the Michigan Manufacturers Technical Center.

Patten, John

2013-12-31T23:59:59.000Z

88

Journal of Mathematical Imaging and Vision 19: 3348, 2003 c 2003 Kluwer Academic Publishers. Manufactured in The Netherlands.  

E-Print Network [OSTI]

. Manufactured in The Netherlands. Multiplicative Operator Splittings in Nonlinear Diffusion: From Spatial

Barash, Danny

89

From: Machine Learning Journal, 21, 51--83 (1995) fl 1995 Kluwer Academic Publishers, Boston. Manufactured in The Netherlands.  

E-Print Network [OSTI]

. Manufactured in The Netherlands. Unsupervised Learning of Multiple Motifs in Biopolymers Using Expectation

Bailey, Timothy L.

90

User Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

User Services Print User Services Print The User Services Group is available to aid ALS users before they arrive, while they are here, and after they leave. User Office Experiment Coordination Section Sue Bailey This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Services Group Leader Prospective users Proprietary users Tel: 510-486-7727 ALS User Office The User Office is located on the mezzanine of Building 6 (the ALS), Room 2212. Contact Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 Fax: 510-486-4773 Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Hours User Office: Monday-Friday 8.00 a.m. - 12.00 p.m. and 1.00 p.m. - 5.00 p.m. New user registration: Monday-Friday 8.00 a.m. - 12.00 p.m. and

91

User Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

User Services Print User Services Print The User Services Group is available to aid ALS users before they arrive, while they are here, and after they leave. User Office Experiment Coordination Section Sue Bailey This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Services Group Leader Prospective users Proprietary users Tel: 510-486-7727 ALS User Office The User Office is located on the mezzanine of Building 6 (the ALS), Room 2212. Contact Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 Fax: 510-486-4773 Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Hours User Office: Monday-Friday 8.00 a.m. - 12.00 p.m. and 1.00 p.m. - 5.00 p.m. New user registration: Monday-Friday 8.00 a.m. - 12.00 p.m. and

92

User Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

User Services Print User Services Print The User Services Group is available to aid ALS users before they arrive, while they are here, and after they leave. User Office Experiment Coordination Section Sue Bailey This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Services Group Leader Prospective users Proprietary users Tel: 510-486-7727 ALS User Office The User Office is located on the mezzanine of Building 6 (the ALS), Room 2212. Contact Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 Fax: 510-486-4773 Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Hours User Office: Monday-Friday 8.00 a.m. - 12.00 p.m. and 1.00 p.m. - 5.00 p.m. New user registration: Monday-Friday 8.00 a.m. - 12.00 p.m. and

93

User Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

User Services Print User Services Print The User Services Group is available to aid ALS users before they arrive, while they are here, and after they leave. User Office Experiment Coordination Section Sue Bailey This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Services Group Leader Prospective users Proprietary users Tel: 510-486-7727 ALS User Office The User Office is located on the mezzanine of Building 6 (the ALS), Room 2212. Contact Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 Fax: 510-486-4773 Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Hours User Office: Monday-Friday 8.00 a.m. - 12.00 p.m. and 1.00 p.m. - 5.00 p.m. New user registration: Monday-Friday 8.00 a.m. - 12.00 p.m. and

94

User Guide  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Guide Guide User Guide Print 1. Apply for Beam Time Submit a new proposal or a Beam Time Request (BTR) using an existing active proposal. 2. Establish a User Agreement Your institute must have a signed agreement with Berkeley Lab before you may do work at the ALS. 3. Complete Experiment Safety Documentation and Review Safety for Users Safety documentation must be completed and reviewed before your beam time. Experiments involving any biological material or radioactive material require more review steps so please allow several weeks for these. 4. Register with the User Office New and returning users need to register with the User Office TWO weeks before arriving at the ALS. Users arriving out of regular office hours must either have a valid Berkeley Lab ID badge, or have completed registration to be granted access to the ALS.

95

User Obligations  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

User Obligations User Obligations Summary of what APS expects of users in return for access to the facility. Registration Register with the APS as far in advance of your initial visit as possible (even when you are simply planning an experiment). User Agreement Ensure that a User Agreement is in place between the APS and your home institution. Training Ensure that you complete all required training before conducting hands-on work at the APS. Safety Assessement Complete Experiment Safety Assessment Forms. End of Experiment Form Complete End of Experiment form to provide feedback (required for General Users, optional for others). Published Reports of Work Carried Out at the APS As an APS user, you are required to notify both the APS and your host beamline staff of all work published in the open literature (including

96

4D printing : towards biomimetic additive manufacturing  

E-Print Network [OSTI]

Inherent across all scales in Nature's material systems are multiple design dimensions, the existences of which are products of both evolution and environment. In human manufacturing where design must be preconceived and ...

Tsai, Elizabeth Yinling

2013-01-01T23:59:59.000Z

97

User Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Services Print Services Print The User Services Group is available to aid ALS users before they arrive, while they are here, and after they leave. User Office Experiment Coordination Section Sue Bailey This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Services Group Leader Prospective users Proprietary users Tel: 510-486-7727 ALS User Office The User Office is located on the mezzanine of Building 6 (the ALS), Room 2212. Contact Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 Fax: 510-486-4773 Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Hours User Office: Monday-Friday 8.00 a.m. - 12.00 p.m. and 1.00 p.m. - 5.00 p.m. New user registration: Monday-Friday 8.00 a.m. - 12.00 p.m. and

98

User Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Services Print Services Print The User Services Group is available to aid ALS users before they arrive, while they are here, and after they leave. User Office Experiment Coordination Section Sue Bailey This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Services Group Leader Prospective users Proprietary users Tel: 510-486-7727 ALS User Office The User Office is located on the mezzanine of Building 6 (the ALS), Room 2212. Contact Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 Fax: 510-486-4773 Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Hours User Office: Monday-Friday 8.00 a.m. - 12.00 p.m. and 1.00 p.m. - 5.00 p.m. New user registration: Monday-Friday 8.00 a.m. - 12.00 p.m. and

99

Office 2007 User Workshop  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Office 2007 User Workshop Office 2007 User Workshop M. Westbrook, APS-IT June 30, 2010 Goal: Quick Start for New Office 2007 Users Introduce and highlight new Office 2007 program feature (Word, Excel and PowerPoint) Identify sources of help with Office 2007 Provide opportunity for users to share experiences Office 2007: Introduction  Format for today's presentation is that of a workshop rather than training course  Many of the new features presented here apply to multiple Office applications  Sources for more information are identified throughout the presentation  Presenter is no expert, but plans to share what has been learned thus far  Attendees are encouraged to share what you have learned for the benefit of all

100

Industrial Users  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industrial Users - Media Publications and Information The Invisible Neutron Threat Neutron-Induced Failures in Semiconductor Devices Nuclear Science Research at the LANSCE-WNR...

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Industrial Users  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

on altitude. This large flux allows testing of semiconductor devices at greatly accelerated rates. Industry users are invited to contact Steve Wender, phone:505-667-1344 or...

102

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Thin Films Thin Films PDF format (189 kb) Multi Layer Thin Films Multi Layer Thin Films Planetary Sputtering SystemsPlanetary Sputtering Systems Planetary Sputtering Systems The Thin Film laboratory within Manufacturing Science & Technology provides a variety of vapor deposition processes and facilities for cooperative research and development. Available capabilities include electron beam evaporation, sputter deposition, reactive deposition processes, atomic layer deposition (ALD) and specialized techniques such as focused ion beam induced chemical vapor deposition. Equipment can be reconfigured for prototyping or it can be dedicated to long-term research, development and manufacturing. Most sputter and evaporative deposition systems are capable of depositing multiple materials.

103

American Manufacturing Gets a Boost | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

American Manufacturing Gets a Boost American Manufacturing Gets a Boost American Manufacturing Gets a Boost June 12, 2012 - 7:52pm Addthis DOE is investing in projects that will increase energy efficiency in the manufacturing industry. One project will develop a new process for producing titanium components that could reduce the materials needed by ten-fold in aircraft and vehicle manufacturing. | Courtesy of Flickr user markjhandel, Creative Commons license. DOE is investing in projects that will increase energy efficiency in the manufacturing industry. One project will develop a new process for producing titanium components that could reduce the materials needed by ten-fold in aircraft and vehicle manufacturing. | Courtesy of Flickr user

104

The President's Manufacturing Initiative  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

The President's The President's Manufacturing Initiative Manufacturing Initiative Roadmap Workshop on Roadmap Workshop on Manufacturing R&D for Manufacturing R&D for the Hydrogen Economy the Hydrogen Economy Washington, D.C. Washington, D.C. July 13, 2005 July 13, 2005 Dale Hall Dale Hall Acting Chair, Interagency Working Group on Acting Chair, Interagency Working Group on Manufacturing Research and Development Manufacturing Research and Development National Science and Technology Council National Science and Technology Council and and Director, Manufacturing Engineering Laboratory Director, Manufacturing Engineering Laboratory National Institute of Standards and Technology National Institute of Standards and Technology U.S. Department of Commerce U.S. Department of Commerce

105

Metrics for Sustainable Manufacturing  

E-Print Network [OSTI]

a system or process in maintaining a sustainable level of afor manufacturing processes to achieve truly sustainablesustainable phase of the automobile manufacturing process

Reich-Weiser, Corinne; Vijayaraghavan, Athulan; Dornfeld, David

2008-01-01T23:59:59.000Z

106

Advanced Manufacturing Office Overview  

Broader source: Energy.gov [DOE]

Overview presentation by the Advanced Manufacturing Office for the Microwave (MW) and Radio Frequency (RF) as Enabling Technologies for Advanced Manufacturing

107

Additive Manufacturing Technology Assessment  

Office of Environmental Management (EM)

subtractive manufacturing 41 methods 1. Additive manufacturing is also called as 3D printing, 42 additive fabrication, or freeform fabrication. These new 43 techniques, while...

108

User Policy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

User Policy Print User Policy Print 1. Guiding Principles The aim of User Policy at the Advanced Light Source (ALS) is to provide a framework for establishing a challenging yet congenial environment where talented scientists from different backgrounds can work together in pursuit of the new scientific opportunities presented by the availability of this innovative facility. User policy must address a variety of user needs and sensitivities. On one hand, the qualified researcher with little financial backing needs assurance of adequate access to the facility. On the other hand, qualified groups that make a large commitment of time and resources need some assurance of an equitable return on their investment. A national facility should be accessible to all qualified researchers and at the ALS there are three modes of access: as a General User, a member of an Approved Program (AP), or as a member of a Participating Research Team (PRT). All proposals for research to be conducted at the ALS are evaluated based on the criteria endorsed by the International Union of Pure and Applied Physics (IUPAP). These criteria are detailed on the IUPAP Web site at IUPAP Recommendations for the Use of Major Physics Users Facilities (pdf version).

109

Clean Energy Manufacturing Resources - Technology Prototyping | Department  

Broader source: Energy.gov (indexed) [DOE]

Guide Home » Clean Energy Manufacturing Resources - Technology Guide Home » Clean Energy Manufacturing Resources - Technology Prototyping Clean Energy Manufacturing Resources - Technology Prototyping Clean Energy Manufacturing Resources - Technology Prototyping Find resources to help you design and refine a prototype of a new clean energy technology or product. For prototyping, areas to consider include materials characterization; models and tools; intellectual property protection; small-scale production; R&D funding; and regional, state, and local resources. For more resources, see the Clean Energy Manufacturing Federal Resource Guide. Characterize Materials Shared Research Equipment User Facility - a facility at Oak Ridge National Laboratory that provides access to advanced instruments and scientists for the scale characterization of materials.

110

A measurement infrastructure for sustainable manufacturing  

Science Journals Connector (OSTI)

Global resource degradation, climate change, and environmental pollution are worsening due to increasing globalised industrialisation. Manufacturing industries have thus been put under pressure to cope with these problems while maintaining competitiveness. Sustainable manufacturing has been proposed to meet these challenges. The measurement of sustainability in manufacturing enables the quantitative measure of sustainability performance in specific manufacturing processes that will support decision-making for more sustainable processes and products. This paper describes a proposed sustainable manufacturing measurement infrastructure. The centre piece of this infrastructure is a sustainability performance management component that will effectively manage a sustainable indicator repository, measurement process guidelines, and sustainability performance analysis, evaluation, and reporting. The sustainability measurement infrastructure provides a foundation for decision-making tools development and enables users to create a tight integration into business strategy development processes. Examples in this paper are on carbon emissions and energy consumption.

Shaw C. Feng; Che B. Joung

2011-01-01T23:59:59.000Z

111

NIF Users  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

have never been created in a laboratory environment and exist naturally only during thermonuclear burn, in supernovae and in the fusion reactions that power our stars. The NIF User...

112

User Community  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Community Community Given the pressures of conducting experiments, it's sometimes hard to find time to connect with new potential colleagues, even though they may be working at the next beamline. There are many opportunities for making informal connections with other users and with APS staff; this page lists only a few of the many communication channels at the APS. Reaching Other Users Coffee Cart A source of morning sustenance and a chance to see who's been working in the hutch next to yours all night. An APS manager makes the rounds with the Coffee Cart each morning. Scientific Interest Groups Self-organizing groups of users and beamline staff interested in advancing synchrotron research in a particular area. User Science Seminars, General Seminars and Conferences

113

User Policy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Policy Policy User Policy Print 1. Guiding Principles The aim of User Policy at the Advanced Light Source (ALS) is to provide a framework for establishing a challenging yet congenial environment where talented scientists from different backgrounds can work together in pursuit of the new scientific opportunities presented by the availability of this innovative facility. User policy must address a variety of user needs and sensitivities. On one hand, the qualified researcher with little financial backing needs assurance of adequate access to the facility. On the other hand, qualified groups that make a large commitment of time and resources need some assurance of an equitable return on their investment. A national facility should be accessible to all qualified researchers and at the ALS there are three modes of access: as a General User, a member of an Approved Program (AP), or as a member of a Participating Research Team (PRT). All proposals for research to be conducted at the ALS are evaluated based on the criteria endorsed by the International Union of Pure and Applied Physics (IUPAP). These criteria are detailed on the IUPAP Web site at IUPAP Recommendations for the Use of Major Physics Users Facilities (pdf version).

114

Additive Manufacturing Technologies  

Science Journals Connector (OSTI)

Rapid Prototyping is the construction of complex three-dimensional parts using additive manufacturing technology.

Jrgen Stampfl; Markus Hatzenbichler

2014-01-01T23:59:59.000Z

115

Manufacturing | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Science & Innovation » Energy Efficiency » Manufacturing Science & Innovation » Energy Efficiency » Manufacturing Manufacturing Learn how combined heat and power could strengthen U.S. manufacturing competitiveness, lower energy consumption and reduce harmful emissions. Learn how combined heat and power could strengthen U.S. manufacturing competitiveness, lower energy consumption and reduce harmful emissions. Manufacturing is the lifeblood of the American economy -- providing jobs for hard working American families and helping increase U.S. competitiveness in the global marketplace. The Energy Department is committed to growing America's manufacturing industry by helping companies become leaders in the production of clean energy technologies like electric vehicles, LED bulbs and solar panels. The

116

Photovoltaics information user study  

SciTech Connect (OSTI)

The results of a series of telephone interviews with groups of users of information on photovoltaics (PV) are described. These results, part of a larger study on many different solar technologies, identify types of information each group needed and the best ways to get information to each group. The report is 1 of 10 discussing study results. The overall study provides baseline data about information needs in the solar community. It covers these technological areas: photovoltaics, passive solar heating and cooling, active solar heating and cooling, biomass energy, solar thermal electric power, solar industrial and agricultural process heat, wind energy, ocean energy, and advanced energy storage. An earlier study identified the information user groups in the solar community and the priority (to accelerate solar energy commercialization) of getting information to each group. In the current study only high-priority groups were examined. Results from seven PV groups respondents are analyzed in this report: DOE-Funded Researchers, Non-DOE-Funded Researchers, Researchers Working for Manufacturers, Representatives of Other Manufacturers, Representatives of Utilities, Electric Power Engineers, and Educators.

Belew, W.W.; Wood, B.L.; Marie, T.L.; Reinhardt, C.L.

1980-10-01T23:59:59.000Z

117

User Policy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Policy Print Policy Print 1. Guiding Principles The aim of User Policy at the Advanced Light Source (ALS) is to provide a framework for establishing a challenging yet congenial environment where talented scientists from different backgrounds can work together in pursuit of the new scientific opportunities presented by the availability of this innovative facility. User policy must address a variety of user needs and sensitivities. On one hand, the qualified researcher with little financial backing needs assurance of adequate access to the facility. On the other hand, qualified groups that make a large commitment of time and resources need some assurance of an equitable return on their investment. A national facility should be accessible to all qualified researchers and at the ALS there are three modes of access: as a General User, a member of an Approved Program (AP), or as a member of a Participating Research Team (PRT). All proposals for research to be conducted at the ALS are evaluated based on the criteria endorsed by the International Union of Pure and Applied Physics (IUPAP). These criteria are detailed on the IUPAP Web site at IUPAP Recommendations for the Use of Major Physics Users Facilities (pdf version).

118

User Policy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Policy Print Policy Print 1. Guiding Principles The aim of User Policy at the Advanced Light Source (ALS) is to provide a framework for establishing a challenging yet congenial environment where talented scientists from different backgrounds can work together in pursuit of the new scientific opportunities presented by the availability of this innovative facility. User policy must address a variety of user needs and sensitivities. On one hand, the qualified researcher with little financial backing needs assurance of adequate access to the facility. On the other hand, qualified groups that make a large commitment of time and resources need some assurance of an equitable return on their investment. A national facility should be accessible to all qualified researchers and at the ALS there are three modes of access: as a General User, a member of an Approved Program (AP), or as a member of a Participating Research Team (PRT). All proposals for research to be conducted at the ALS are evaluated based on the criteria endorsed by the International Union of Pure and Applied Physics (IUPAP). These criteria are detailed on the IUPAP Web site at IUPAP Recommendations for the Use of Major Physics Users Facilities (pdf version).

119

User Manual  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Manual Manual Services Overview ECS Audio/Video Conferencing Fasterdata IPv6 Network Network Performance Tools (perfSONAR) ESnet OID Registry PGP Key Service Virtual Circuits (OSCARS) OSCARS Case Study Documentation User Manual Web Browser Interface (WBUI) Web Service Interface (API) FAQ Design Specifications Functional Specifications Notifications Publications Authorization Policy Default Attributes Message Security Clients For Developers Interfaces Links Hardware Requirements DOE Grids Service Transition Contact Us Technical Assistance: 1 800-33-ESnet (Inside the US) 1 800-333-7638 (Inside the US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site Feedback: info@es.net User Manual Introduction The OSCARS Interdomain Controller (IDC) allows end users to reserve high

120

The Advanced Manufacturing Partnership  

E-Print Network [OSTI]

;ve Manufacturing Technologies (led by Dow, Honeywell and MIT) Manufacturing Ins;tutes (led, Honeywell and MIT GOALS § To launch public-private ini:a:ves to advance transforma

Das, Suman

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Manufacturing Innovation Topics Workshop  

Broader source: Energy.gov [DOE]

The Advanced Manufacturing Office (AMO) and the Office of the Secretary of Defense Manufacturing Technology Program (OSD ManTech) will host a workshop to discuss AMO's recent Request for Information (RFI) on Clean Energy Manufacturing Topic Areas as well as the recent areas of interest announced by OSD ManTech for a new Manufacturing Innovation Institute on October 8-9, 2014 in Fort Worth, TX.

122

User Environment  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

User Environment Environment on Genepool When you log into the Genepool system you will land in your $HOME directory on NERSC's "global homes" file system. The global homes file system is mounted across all NERSC computation systems with the exception of PDSF. The $HOME directory has quota of 40GB and 1,000,000 inodes. To customize your environment, by setting environment variables or aliases, you will need to modify one of the "dot" files that NERSC has created for you. You may NOT modify the .bashrc or .cshrc files. These are set to read-only on NERSC systems and specify system specific customizations. Instead you should modify a file called .bashrc.ext or .cshrc.ext. Learn more about the global homes user environment. Important Environment Variables

123

User's Manual  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

User's User's Manual for Pelegant - Yusong Wang, Michael Borland, Robert Soliday - APS Accelerator Systems Division, Advanced Photon Source 1 Introduction Pelegant stands for "parallel elegant," which is a parallelized version of elegant [1]. Written in the C programming language with MPICH, the Pelegant has been successfully ported to several clusters and supercomputers, such as the "weed" cluster (a heterogeneous system of 100 CPUs) at Advanced Photon Source (APS), and the Jazz cluster (350 Intel Xeon CPUs) at Argonne National Lab (ANL) and the BlueGene/L supercomputer (1024 dual PowerPC 440 nodes) at Argonne National Lab. Thanks to careful design in parallelization and good architecture of the serial elegant, the Pelegant achieves very good performance. For example, for a simulation of 10 5 particles in APS including symplectic element-by-element tracking,

124

NERSC User Group Meeting  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

NERSC User Group Meeting NERSC User Group Meeting Oct 18, 2010 Outline * About OpenMP * Parallel Regions * Worksharing Constructs * Synchronization * Data Scope * Tasks * Using OpenMP at NERSC 2 3 Common Architectures * Shared Memory Architecture - Multiple CPUs share global memory, could have local cache - Uniform Memory Access (UMA) - Typical Shared Memory Programming Model: OpenMP, Pthreads, ... * Distributed Memory Architecture - Each CPU has own memory - Non-Uniform Memory Access (NUMA) - Typical Message Passing Programming Model: MPI, ... * Hybrid Architecture - UMA within one SMP node - NUMA across nodes - Typical Hybrid Programming Model: mixed MPI/OpenMP, ... What is OpenMP * OpenMP is an industry standard API of C/C++ and Fortran for shared memory parallel programming.

125

Lujan Center User Guide  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

3 3 High-Pressure Preferred Orientation Neutron Diffractometer (HIPPO) HIPPO is the first third-generation neutron time- of-flight powder diffractometer constructed in the United States. It achieves very high neutron count rates by virtue of a short (9 m) initial flight path on a high-intensity water moderator and 1360 3 He detector tubes covering 4.8 m 2 of detector area from 10° - 150° in scattering angles. HIPPO was designed and manufactured as a joint effort between LANSCE and the University of California with the goal of doing world-class science by making neutron powder diffractometry an accessible tool to the national user community. D-spacing ranges from 0.12 - 4.80 Å (1.31 - 52.4 Å -1 ) to 1.2 - 47.5 Å (0.13 - 5.3 Å -1 ) are available to support studies of crystal orientation

126

Extreme Users WHY engage with extreme users  

E-Print Network [OSTI]

Extreme Users METHOD WHY engage with extreme users HOW to engage extreme users Designers engage inspiration from their work-arounds and frameworks. When you speak with and observe extreme users, their needs extreme users are often also needs of a wider population. Determine who's extreme Determining who

Prinz, Friedrich B.

127

Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit  

Broader source: Energy.gov [DOE]

Presentation on fuel cell manufacturing by Sunita Satyapal at the American Energy and Manufacturing Competitiveness Summit on December 12, 2013.

128

Design for Additive ManufacturingElement transitions and aggregated structures  

Science Journals Connector (OSTI)

Abstract Additive Manufacturing technologies create parts layer by layer. Thereby, lots of benefits are offered. Especially extended design freedoms provide new potentials for the design of technical parts. To make these benefits accessible to different user groups, design rules for Additive Manufacturing were developed within the project Direct Manufacturing Design Rules. Therefore a process independent method was defined first. Next, design rules were developed for Laser Sintering, Laser Melting and Fused Deposition Modeling. The results were summarized in a design rule catalog and support a suitable design for Additive Manufacturing.

Guido A.O. Adam; Detmar Zimmer

2014-01-01T23:59:59.000Z

129

User level routing for mobile ad hoc networks  

E-Print Network [OSTI]

an alternative architecture where routing is implemented in the user level. User level implementation has many benefits, such as ease of implementation, co-existence of multiple protocols, application specific customizations, and ease of deployment. This thesis...

Virk, Navjot

2001-01-01T23:59:59.000Z

130

Enabling Manufacturing Research through Interoperability  

E-Print Network [OSTI]

sustainable or environmentally benign manufacturing processes andAND SUSTAINABLE FIGURE 8: LIFE-CYCLE OF MANUFACTURING PROCESSES (

Dornfeld, David; Wright, Paul; Helu, Moneer; Vijayaraghavan, Athulan

2009-01-01T23:59:59.000Z

131

NIF User Group  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

users NIF User Group The National Ignition Facility User Group provides an organized framework and independent vehicle for interaction between the scientists who use NIF for...

132

Summary of the MECS 2002 User Needs Questionnaire  

U.S. Energy Information Administration (EIA) Indexed Site

View 2002 User Needs Survey !! View 2002 User Needs Survey !! Summary of the MECS 2002 User Needs Questionnaire CLASSIFICATION Question 1: "The MECS is now required to classify manufacturing establishments according to the North American Industry Classification System (NAICS). This listing shows the 1998 MECS classifications, which does not include every manufacturing classification. Are there any other manufacturing types that would be of interest to you regarding MECS data. The corresponding NAICS code is not necessary, but please provide it, if known. For a full list of all manufacturing classifications, see www.census.gov/epcd/naics02/naicod02.htm#N31 (opens a new window)." Of the 37 user responses, 17 did not answer this question, 3 answered the question "sufficient," and 2 answered "no." .

133

Multiple-user quantum optical communication  

E-Print Network [OSTI]

A fundamental understanding of the information carrying capacity of optical channels requires the signal and physical channel to be modeled quantum mechanically. This thesis considers the problems of distributing multi-party ...

Yen, Brent J., 1977-

2005-01-01T23:59:59.000Z

134

CIMplementation: Evaluating Manufacturing Automation  

E-Print Network [OSTI]

in the manufacturing organization if CIMplementation~* is to succeed. 1.0 INTRODUCTION There is much discussion today about Com puter Integrated Manufacturing (CIM). Automation tools like Computer Aided Design (CAD) systems, robots, automated material handling...~ Pressing the frontier of technology in one's own manufactur ing facility will not be without its pitfalls. Second, while automation engineers may be able to piece together the technological pieces of a CIM system, they cannot and do not evaluate...

Krakauer, J.

135

Manufacturing Success Stories  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Colorado State University Industrial Assessment Center Saves Manufacturers Money and Trains the Next Generation of Engineers http:energy.goveeresuccess-storiesarticles...

136

Acoustics by additive manufacturing:.  

E-Print Network [OSTI]

??This study focuses on exploring the merging field of additive manufacturing and acoustics and introduces a new type of sound absorber which is regulating performance (more)

Setaki, F.

2012-01-01T23:59:59.000Z

137

Contribution to Nanotechnology Manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

shares Nano 50 award for directed assembly September 3, 2008 Contribution to Nanotechnology Manufacturing LOS ALAMOS, New Mexico, September 3, 2008-A team of scientists spanning...

138

Manufacturing Demonstration Facility  

Broader source: Energy.gov (indexed) [DOE]

is key to stroke recovery * Additive manufacturing allows custom fit glove device using brain machine interface to retrain movement * Gloves are light-weight, low cost and...

139

SSL Manufacturing Roadmap  

Broader source: Energy.gov [DOE]

Report detailing DOE Solid-State Lighting Program activities to accelerate manufacturing improvements that reduce costs and enhance the quality of SSL products.

140

Clean Energy Manufacturing Initiative  

Broader source: Energy.gov [DOE]

Manufacturing technologies for cleaner energy generation, distribution, and use represents an important opportunity for U.S. economic growth, energy security, and accelerated innovation. Likewise,...

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Large Energy Users Program | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Large Energy Users Program Large Energy Users Program Large Energy Users Program < Back Eligibility Commercial Fed. Government Industrial Institutional Local Government Nonprofit Schools State Government Savings Category Heating & Cooling Commercial Heating & Cooling Heating Cooling Home Weatherization Construction Commercial Weatherization Design & Remodeling Manufacturing Other Appliances & Electronics Heat Pumps Commercial Lighting Lighting Water Heating Maximum Rebate Prescriptive: Varies by equipment type Custom: $200,000 or 30% per project Total Prescriptive and Custom combined: $400,000 per calendar year Program Info Funding Source Focus On Energy Start Date 04/01/2012 Expiration Date 12/31/2013 State Wisconsin Program Type State Rebate Program Rebate Amount Prescriptive: Varies by equipment type

142

Worldwide Energy and Manufacturing USA Inc formerly Worldwide Manufacturing  

Open Energy Info (EERE)

Manufacturing USA Inc formerly Worldwide Manufacturing Manufacturing USA Inc formerly Worldwide Manufacturing USA Jump to: navigation, search Name Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA) Place San Bruno, California Zip 94066 Product Worldwide Manufacturing USA is an engineering company based in San Bruno, California. References Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA) is a company located in San Bruno, California . References ↑ "Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA)"

143

Catalyst Manufacturing Science and  

E-Print Network [OSTI]

Catalyst Manufacturing Science and Engineering Consortium (CMSEC) Rutgers University New Jersey, U, automotive, and energy industries makes and/or uses catalysts, there has been no academic program focusing on the operations required to make catalytic materials. Thus, catalyst manufacturing processes are often designed

144

Digital Additive Manufacturing: From Rapid Prototyping to Rapid Manufacturing  

Science Journals Connector (OSTI)

The emergence of stereolithography in 1998 is a milestone for an entirely new class of layer-based manufacturing processes. This new manufacturing approach which allows direct digital manufacturing from CAD to a ...

K. K. B. Hon

2007-01-01T23:59:59.000Z

145

Solar Manufacturing Technology 2  

Broader source: Energy.gov [DOE]

The PV awards span the supply chain from novel methods to make silicon wafers, to advanced cell and metallization processes, to innovative module packaging and processing. The CSP award demonstrates manufacturability of an innovative CSP reflective-trough receiver. The first round of the SolarMat program was launched in September 2013 supporting five projects. The second round, announced on October 22, 2014, funds ten photovoltaics (PV) and concentrating solar power (CSP) projects that focus on driving down the cost of manufacturing and implementing efficiency-increasing technology in manufacturing processes.

146

Innovative Manufacturing Initiative Project Selections  

Office of Energy Efficiency and Renewable Energy (EERE)

The Department announced nearly $23 million for 12 projects across the country to advance technologies aimed at helping American manufacturers dramatically increase the energy efficiency of their manufacturing facilities, lower costs, and develop new manufacturing technologies.

147

Laser Additive Manufacturing of Metals  

Science Journals Connector (OSTI)

Laser Additive Manufacturing (LAM) is based on a repeating layer wise manufacturing process which uses a laser beam to ... ) geometries into simpler two-dimensional (2D) manufacturing steps [1, 2...]. Thus LAM of...

Claus Emmelmann; Jannis Kranz; Dirk Herzog; Eric Wycisk

2013-01-01T23:59:59.000Z

148

Metal Additive Manufacturing: A Review  

Science Journals Connector (OSTI)

This paper reviews the state-of-the-art of an important, rapidly emerging, manufacturing technology that is alternatively called additive manufacturing (AM), direct digital manufacturing, free form fabrication, o...

William E. Frazier

2014-06-01T23:59:59.000Z

149

Innovations in Manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Gov. Haslam Cuts Ribbon at Carbon Fiber Facility Gov. Haslam Cuts Ribbon at Carbon Fiber Facility Governor Bill Haslam along with David Danielson, EERE's Assistant Secretary, celebrate the opening of the Carbon Fiber Technology Facility. The 390-ft. long processing line is capable of custom unit operation configuration and has a capacity of up to 25 tons per year, allowing industry to validate conversion of their carbon fiber precursors at semi-production scale. Manufacturing Demonstration Facility Manufacturing Demonstration Facility Processing Technologies Advanced Materials Automation and Controls Brochure News Manufacturing Engineering Advanced Materials & Processes Materials for Aerospace On the cover, plus, read ORNL's feature articles on additive manufacturing and its momentum for aerospace applications.

150

Development of Additive Manufacturing Technology  

Science Journals Connector (OSTI)

Additive Manufacturing (AM) technology came about as a ... of different technology sectors. Like with many manufacturing technologies, improvements in computing power and reduction...

Dr. Ian Gibson; Dr. David W. Rosen

2010-01-01T23:59:59.000Z

151

Additive Manufacturing for Mass Customization  

Science Journals Connector (OSTI)

Additive manufacturing (AM) is a disruptive manufacturing technology that requires no tooling for production....additively build parts from numerous materials, including polymers, metals and ceramics. Within this...

Phil Reeves; Chris Tuck; Richard Hague

2011-01-01T23:59:59.000Z

152

Additive Manufacturing for Large Products.  

E-Print Network [OSTI]

?? This thesis researches the possibility and feasibility of applying additive manufacturing technology in the manufacturing of propellers. The thesis concerns the production at the (more)

Leirvg, Roar Nelissen

2013-01-01T23:59:59.000Z

153

Sandia National Laboratories: wind manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

manufacturing Wind Energy Manufacturing Lab Helps Engineers Improve Wind Power On November 15, 2011, in Energy, News, Partnership, Renewable Energy, Wind Energy Researchers at the...

154

Dynamic modeling and learning user profile in personalized news agent  

E-Print Network [OSTI]

to changing user interests. In this thesis, a novel scheme is proposed to learn user profile. The proposed scheme is designed to handle multiple domains of long-term and short-term users' interests simultaneously, which are learned through positive...

Widyantoro, Dwi Hendratmo

1999-01-01T23:59:59.000Z

155

2014 NERSC User Survey  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2014 NERSC User Survey 2014 NERSC User Survey December 17, 2014 by Francesca Verdier (0 Comments) Please take a few minutes to fill out NERSC's annual user survey. Your feedback is...

156

Safety for Users  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Safety for Users Print Safety at the ALS The mission of the ALS is "Support users in doing outstanding science in a safe environment." All users and staff participate in creating a...

157

Safety for Users  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Safety for Users Print Safety at the ALS The mission of the ALS is "Support users in doing outstanding science in a safe environment." All users and staff participate in creating...

158

Numerical control user experience  

SciTech Connect (OSTI)

AUTOCON is an acronym for Automatic Contouring, a program which generates a contour toolpath for the external profile of printed writing boards (PWB) using ICEM DDN. AUTOCON originates from the Computer Aided Process Planning (CAPP) Procedure developed by Electrical Manufacturing at Allied Bendix. The CAPP program uses electronically transmitted graphics files received from a design agency to generate automatic panel layouts and travellers for Process Engineers. The objective of AUTOCON is to utilize the information from the CAPP program to generate Numerical Control tapes. If the CAPP program can be utilized to its full potential, it is estimated that a good portion of the 60 to 90 PWB tapes shipped each month from our Numerical Control Department could be eliminated from conventional N/C Programming. The purpose of AUTOCON is to automatically generate a toolpath around the external profile of a PWB with no user intervention. The Process Engineer can generate a profile contour N/C tape after he has completed the panel layout and traveller through CAPPS for a part. After the layout and traveller illustrations have been completed, the same geometry can then be utilized again for the N/C tape. An N/C Analysist then reviews the listing for a final checkout of the job. 13 figs.

Butler, J.

1985-10-01T23:59:59.000Z

159

Manufacturing Consumption of Energy 1991--Combined Consumption and Fuel  

U.S. Energy Information Administration (EIA) Indexed Site

< < Welcome to the U.S. Energy Information Administration's Manufacturing Web Site. If you are having trouble, call 202-586-8800 for help. Return to Energy Information Administration Home Page. Home > Energy Users > Manufacturing > Consumption and Fuel Switching Manufacturing Consumption of Energy 1991 (Combined Consumption and Fuel Switching) Overview Full Report Tables & Spreadsheets This report presents national-level estimates about energy use and consumption in the manufacturing sector as well as manufacturers' fuel-switching capability. Contact: Stephanie.battle@eia.doe.gov Stephanie Battle Director, Energy Consumption Division Phone: (202) 586-7237 Fax: (202) 586-0018 URL: http://www.eia.gov/emeu/mecs/mecs91/consumption/mecs1a.html File Last Modified: May 25, 1996

160

Manufacturers Saving with Lost Foam Metal Casting | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Manufacturers Saving with Lost Foam Metal Casting Manufacturers Saving with Lost Foam Metal Casting Manufacturers Saving with Lost Foam Metal Casting December 18, 2009 - 2:43pm Addthis Eric Barendsen Energy Technology Program Specialist, Office of Energy Efficiency and Renewable Energy What are the key facts? Metal casting was identified as one of the top 10 energy users in manufacturing. The technology represents a 20- to 25-percent reduction in production costs and uses 7 percent fewer materials than traditional processes. One example of this technology is being used by General Motors to make lightweight engine blocks for the fuel-efficient vehicles they manufacture. A government-funded effort to support development of foam metal casting helped reduce an estimated 9.4 million tons of solid waste between 1994 and 2005, which saved industry an estimated 3 trillion Btu.

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

General User Proposals  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

General User Proposals Print General Users are granted beam time through a peer review proposal process. They may use beamlines and endstations provided by the ALS or the...

162

General User Proposals  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Office General User Proposals Print General Users are granted beam time through a peer review proposal process. They may use beamlines and endstations provided by the ALS...

163

Multiple Sclerosis Society (Grant Tracker) Multiple Sclerosis Society (Grant Tracker) applicant guide June 2012 Page 1  

E-Print Network [OSTI]

Multiple Sclerosis Society (Grant Tracker) Multiple Sclerosis Society (Grant Tracker) applicant guide June 2012 Page 1 2012 INTERNAL USER GUIDE A Guide to the Multiple Sclerosis Society Grant Tracker Society web page: http://www.mssociety.org.uk/ #12;Multiple Sclerosis Society (Grant Tracker) Multiple

164

Electrolyzer Manufacturing Progress and Challenges  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Electrolyzer Manufacturing Electrolyzer Manufacturing Progress and Challenges John Torrance, Director of Manufacturing DOE Manufacturing Workshop 8/12/11 Outline * Proton Commercialization Status: PEM Electrolysis * Current Manufacturing Limitations: Stack - Cost Breakdown - Approaches * Current Manufacturing Limitations: System - Cost Breakdown - Approaches * Potential Impact * Summary and Conclusions 2 3 * World leader in Proton Exchange Membrane (PEM) electrolyzer technology * Founded in 1996 - changed name from Proton Onsite in April 2011 to reflect product expansion. * ISO 9001:2008 registered * Over 1,500 systems operating in 62 different countries. Cell Stacks Complete Systems Turnkey Solutions Military Applications Proton Energy Proton Onsite Headquarters in Wallingford, CT Capabilities * Complete product development, manufacturing & testing

165

Wind energy systems information user study  

SciTech Connect (OSTI)

This report describes the results of a series of telephone interviews with potential users of information on wind energy conversion. These interviews, part of a larger study covering nine different solar technologies, attempted to identify: the type of information each distinctive group of information users needed, and the best way of getting information to that group. Groups studied include: wind energy conversion system researchers; wind energy conversion system manufacturer representatives; wind energy conversion system distributors; wind turbine engineers; utility representatives; educators; county agents and extension service agents; and wind turbine owners.

Belew, W.W.; Wood, B.L.; Marle, T.L.; Reinhardt, C.L.

1981-01-01T23:59:59.000Z

166

Advanced Manufacture of Reflectors  

Broader source: Energy.gov [DOE]

The Advance Manufacture of Reflectors fact sheet describes a SunShot Initiative project being conducted research team led by the University of Arizona, which is working to develop a novel method for shaping float glass. The technique developed by this research team can drastically reduce the time required for the shaping step. By enabling mass production of solar concentrating mirrors at high speed, this project should lead to improved performance and as much as a 40% reduction in manufacturing costs for reflectors made in very high volume.

167

VISION 2008 User's Guide  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

VISION 2008 User's Guide VISION 2008 User's Guide ANL-08/34 Energy Systems Division VISION 2008 User's Guide ANL-08/34 User's Guide by J. Ward Vehicle Technologies Program, U.S. Department of Energy, Energy Efficiency and Renewable Energy VISION model by A. Vyas and M. Singh Transportation Technology R&D Center, Argonne National Laboratory October 2008 VISION 2008 User's Guide October 2008 i Table of Contents Copyright Notification .............................................................................................................................. ii List of Abbreviations ................................................................................................................................ iii

168

Advanced Drivetrain Manufacturing  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy (DOE) supports advanced manufacturing techniques that are leading to the "next-generation" of more reliable, affordable, and efficient wind turbine drivetrains. As turbines continue to increase in size, each and every component must also be scaled to meet the demands for renewable energy.

169

Innovations in Manufacturing  

Science Journals Connector (OSTI)

...competition from steam engines and water...Century ofthe Steam Engine is a classic...of the American System of Manufactures...general-purpose machine tools, interchangeable...spe-cialized machine tools, and were con-fined...note that if the system was con-fined...Nel-son provides an assessment of working conditions...

THOMAS WEISS

1983-05-20T23:59:59.000Z

170

FACET User Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages

AD SLACPortal > Accelerator Research Division > FACET User Facility AD SLACPortal > Accelerator Research Division > FACET User Facility Sign In Launch the Developer Dashboard SLAC National Accelerator Laboratory DOE | Stanford | SLAC | SSRL | LCLS | AD | PPA | Photon Science | PULSE | SIMES FACET User Facility : FACET An Office of Science User Facility Search this site... Search Help (new window) Top Link Bar FACET User Facility FACET Home About FACET FACET Experimental Facilities FACET Users Research at FACET SAREC Expand SAREC FACET FAQs FACET User Facility Quick Launch FACET Users Home FACET Division ARD Home About FACET FACET News FACET Users FACET Experimental Facilities FACET Research Expand FACET Research FACET Images Expand FACET Images SAREC Expand SAREC FACET Project Site (restricted) FACET FAQs FACET Site TOC All Site Content

171

User_ViewRecords  

Broader source: Energy.gov (indexed) [DOE]

User Records User Records © 2011 SuccessFactors, Inc. - 1 - SuccessFactors Learning Confidential. All rights reserved. Job Aid: Viewing User Records Purpose The purpose of this job aid is to guide users through the step-by-step process of viewing their records. Each task demonstrates viewing of different records. Task A. View To-Do List Enter the web address (URL) of the user application into your browser Address field and press the Enter key. Enter your user ID in the User ID textbox. Enter your password in the Password textbox. Click Sign In. View To-Do List (filter, view) 7 Steps Task A View Completed Work 8 Steps Task B View Curriculum Status and Details 11 Steps Task C 3 3 1 2 2 1 SuccessFactors Learning v 6.4 User Job Aid Viewing User Records

172

Designing the user in user interfaces  

Science Journals Connector (OSTI)

In the good old days, the human was here, the computer there, and a good living was to be made by designing ways to interface between the two. Now we find ourselves unthinkingly pinching to zoom in on a picture in a paper magazine. User interfaces are ... Keywords: mixed reality, posthuman factors, transhumanism, user interace, virtual reality

Mark Bolas

2014-10-01T23:59:59.000Z

173

Transformational Manufacturing | Argonne National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Transformational Manufacturing Transformational Manufacturing Argonne's new Advanced Battery Materials Synthesis and Manufacturing R&D Program focuses on scalable process R&D to produce advanced battery materials in sufficient quantity for industrial testing. The U.S. manufacturing industry consumes more than 30 quadrillion Btu of energy per year, directly employs about 12 million people and generates another 7 million jobs in related businesses. Argonne is working with industry to develop innovative and transformational technology to improve the efficiency and competitiveness of domestic manufacturing while reducing its carbon footprint. The lab's efforts concentrate on sustainable manufacturing, applied nanotechnology and distributed energy, with an emphasis on transitioning science discoveries to the market.

174

Manufacturing News | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing Manufacturing News Manufacturing News RSS January 15, 2014 FACTSHEET: Next Generation Power Electronics Manufacturing Innovation Institute The Obama Administration announces the selection of North Carolina State University to lead a public-private manufacturing innovation institute for next generation power electronics. November 22, 2013 In Cleveland, Alcoa and ArcelorMittal Recognized for Leadership in Energy Efficiency As Part of Obama Administration's Better Plants Program, U.S. Manufacturers Cut Energy Waste and Save Money October 21, 2013 FACT SHEET: Energy Department Actions to Deploy Combined Heat and Power, Boost Industrial Efficiency Underscoring President Obama's Climate Action Plan to cut harmful emissions and double energy efficiency, the Energy Department is taking

175

Manufacturing Initiative | Clean Energy | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Research Areas Research Areas Buildings Climate & Environment Manufacturing Fossil Energy Sensors & Measurement Sustainable Electricity Systems Biology Transportation Clean Energy Home | Science & Discovery | Clean Energy | Research Areas | Manufacturing SHARE Manufacturing Initiative Titanium robotic hand holding sphere fabricated using additive manufacturing Oak Ridge National Laboratory is supporting the DOE's Office of Energy Efficiency and Renewable Energy (EERE) Clean Energy Manufacturing Initiative focusing on American competitiveness in clean energy manufacturing. The DOE Initiative has two primary objectives-increase US competitiveness in the production of clean energy products (e.g., wind turbines, solar panels, energy efficient appliances, light bulbs, vehicles and automotive

176

Manufacturing News | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing Manufacturing News Manufacturing News RSS August 3, 2011 Department of Energy Announces Philips Lighting North America as Winner of L Prize Competition Philips Product Delivers on Department's Challenge to Replace Common Light Bulb with Energy-Saving Lighting Alternative August 2, 2011 Department of Energy to Invest $50 Million to Advance Domestic Solar Manufacturing Market, Achieve SunShot Goal SUNPATH Program Will Boost American Competitiveness, Lower Cost of Solar Energy June 29, 2011 Department of Energy Announces New Partnerships to Support Manufacturing Job Training National Training and Education Resource (NTER) Offers Tools to Train Workers June 24, 2011 Department of Energy Announces $120 Million to Support Development of Innovative Manufacturing Processes

177

The User Agreement  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

User Agreement User Agreement Oak Ridge National Laboratory is home to a number of highly sophisticated experimental user facilities. These research facilities, instruments, and laboratories are designed to serve Laboratory researchers, engineers, and technical staff, as well as external researchers from universities, industries, foreign institutions and other government laboratories. Sharing these state-of-the-art facilities with the scientific, industrial, and technical communities provides access to unique and specialized technology, equipment and instrumentation without burdening the user with the astronomical capital costs of building such facilities. Characteristics of User Agreements * User Agreements come in two types; proprietary and non-proprietary. The characteristics of

178

Manufacturing for the Hydrogen Economy Manufacturing Research & Development  

E-Print Network [OSTI]

that convert hydrogen into electric energy, (2) hydrogen storage systems, and (3) large-scale hydrogen and prioritize topics for public-private R&D on manufacturing hydrogen storage system components. ScopeManufacturing for the Hydrogen Economy Manufacturing Research & Development of Onboard Hydrogen

179

Gas Turbine Manufacturers Perspective  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Viability and Experience of IGCC From a Viability and Experience of IGCC From a Gas Turbine Manufacturers Perspective ASME - IGCC ASME - IGCC Turbo Turbo Expo Expo June 2001 June 2001 GE Power Systems g Klaus Brun, Ph.D. - Manager Process Power Plant Product & Market Development Robert M. Jones - Project Development Manager Process Power Plants Power Systems Power Systems General Electric Company General Electric Company ABSTRACT GE Power Systems g Economic Viability and Experience of IGCC From a Gas Turbine Manufacturers Perspective High natural gas fuel gas prices combined with new technology developments have made IGCC a competitive option when compared to conventional combined cycle or coal steam turbine cycles. Although the initial investment costs for an IGCC plant are still comparatively high, the low

180

Fuel Oil Use in Manufacturing  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

of fuel oil relative to other fuels is that manufacturers must maintain large storage tanks. This can prove to be an added expense beyond the price of the fuel. Manufacturers...

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Method and apparatus for manufacturing gas tags  

DOE Patents [OSTI]

For use in the manufacture of gas tags employed in a gas tagging failure detection system for a nuclear reactor, a plurality of commercial feed gases each having a respective noble gas isotopic composition are blended under computer control to provide various tag gas mixtures having selected isotopic ratios which are optimized for specified defined conditions such as cost. Using a new approach employing a discrete variable structure rather than the known continuous-variable optimization problem, the computer controlled gas tag manufacturing process employs an analytical formalism from condensed matter physics known as stochastic relaxation, which is a special case of simulated annealing, for input feed gas selection. For a tag blending process involving M tag isotopes with N distinct feed gas mixtures commercially available from an enriched gas supplier, the manufacturing process calculates the cost difference between multiple combinations and specifies gas mixtures which approach the optimum defined conditions. The manufacturing process is then used to control tag blending apparatus incorporating tag gas canisters connected by stainless-steel tubing with computer controlled valves, with the canisters automatically filled with metered quantities of the required feed gases.

Gross, Kenny C. (Bolingbrook, IL); Laug, Matthew T. (Idaho Falls, ID)

1996-01-01T23:59:59.000Z

182

Method and apparatus for manufacturing gas tags  

DOE Patents [OSTI]

For use in the manufacture of gas tags employed in a gas tagging failure detection system for a nuclear reactor, a plurality of commercial feed gases each having a respective noble gas isotopic composition are blended under computer control to provide various tag gas mixtures having selected isotopic ratios which are optimized for specified defined conditions such as cost. Using a new approach employing a discrete variable structure rather than the known continuous-variable optimization problem, the computer controlled gas tag manufacturing process employs an analytical formalism from condensed matter physics known as stochastic relaxation, which is a special case of simulated annealing, for input feed gas selection. For a tag blending process involving M tag isotopes with N distinct feed gas mixtures commercially available from an enriched gas supplier, the manufacturing process calculates the cost difference between multiple combinations and specifies gas mixtures which approach the optimum defined conditions. The manufacturing process is then used to control tag blending apparatus incorporating tag gas canisters connected by stainless-steel tubing with computer controlled valves, with the canisters automatically filled with metered quantities of the required feed gases. 4 figs.

Gross, K.C.; Laug, M.T.

1996-12-17T23:59:59.000Z

183

Argonne CNM: Industrial Users  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

For Industrial Users For Industrial Users The Center for Nanoscale Materials (CNM) has specific interest in growing the industrial user program and encourages researchers in industry to consider the capabilities and expertise we have to offer. As a CNM user, you have easy access to sophisticated scientific instrumentation geared toward nanoscience and nanotechnology. Moreover, our widely recognized staff researchers offer support in designing your experiments, using the equipment, and analyzing your data. Access to the CNM is through peer review of user proposals. Before you submit your first user proposal, we encourage you to contact any of our staff researchers, group leaders, the User Office, or division management to discuss the feasibility of your intended research using the expertise and facilities at the CNM. We are here to serve you as part of our user community and will be happy to address any questions you might have.

184

Fermilab Users' Meeting, 2009  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Users Meeting Poster Fermilab Users' Meeting Users Meeting Poster Fermilab Users' Meeting June 3-4, 2009 The annual gathering of the Fermilab Users Organization will be held on June 3-4, 2009. This meeting is an opportunity for discussion of new physics results from the laboratory's experimental program, future initiatives at the lab, and thoughtful presentations from leaders of the scientific policy community. The meeting will also feature selected talks from outstanding young physicists. Topics to be covered at the Users Meeting include: Collider Physics Astro-particle Physics Neutrino Physics Future Plans Full Agenda Registration is now closed. NEW!: Pictures from the 2009 Users' Meeting can be found here. A poster session organized by the GSA will be held on June 3rd in the Atrium. The public lecture at this year's Users' Meeting will be given by Prof. Tom Katsouleas

185

NSLS Services | User Accounts  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

User Accounts User Accounts Operating Accounts (81000 accounts) General Users who are allocated beam time and Participating Research Teams (PRTs) or Contributing Users (CUs) who operate beamlines should establish a BNL operating account to cover the costs of materials while running an experiment, shipping, and/or miscellaneous BNL services (telephone & fax codes), if these needs are anticipated. The term of the purchase order must be specified and names of persons having signature authorization for charges against this account must be listed. Brookhaven's Fiscal Division will bill the user for any charges the user makes to the account. Users are obligated to pay outstanding debts promptly. All users should set up a $1,000 operating account to cover operating expenses while at the NSLS, such as charges for use of trades, shops, and

186

Leveraging Manufacturing for a Sustainable Future  

E-Print Network [OSTI]

2010): Sustainable Manufacturing Greening Processes,processes and systems) can play in creating a sustainablesustainable manufacturing as the creation of manufacturing products that use materials and processes

Dornfeld, David

2011-01-01T23:59:59.000Z

187

Establishing Greener Products and Manufacturing Processes  

E-Print Network [OSTI]

D. , Sustainable Manufacturing - Greening Processes,Avoid) Increase process efficiency Most sustainable (Improvesustainable manufacturing. 2 They highlighted research needs in four categories: i) manufacturing processes and

Linke, Barbara; Huang, Yu-Chu; Dornfeld, David

2012-01-01T23:59:59.000Z

188

Sustainable Manufacturing Greening Processes, Systems and Products  

E-Print Network [OSTI]

mittels Sustainable Manufacturing - Greening Processes,Sustainable for manufacturing Manufacturing Cambridge, accessed processes,processes due to energy awareness and environmental consciousness create many opportunities for sustainable

Dornfeld, David

2010-01-01T23:59:59.000Z

189

Establishing Greener Products and Manufacturing Processes  

E-Print Network [OSTI]

D. , Sustainable Manufacturing Greening Processes, Systemsorimpact low Most sustainable Increaseprocess efficiencysustainable manufacturing [1]. They highlighted research needs in four categories: i) manufacturing processes and

Linke, Barbara; Dornfeld, David; Huang, Yu-Chu

2011-01-01T23:59:59.000Z

190

Climate VISION: Private Sector Initiatives: Automobile Manufacturers...  

Office of Scientific and Technical Information (OSTI)

Industry Associations Alliance of Automobile Manufacturers The Alliance of Automobile Manufacturers, Inc. is a trade association composed of 10 car and light truck manufacturers...

191

Precision and Energy Usage for Additive Manufacturing  

E-Print Network [OSTI]

Sustainability of additive manufacturing: measuring theCommittee F42 on Additive Manufacturing Technologies," TheASTM Committee F42 on Additive Manufacturing Technologies. -

Clemon, Lee; Sudradjat, Anton; Jaquez, Maribel; Krishna, Aditya; Rammah, Marwan; Dornfeld, David

2013-01-01T23:59:59.000Z

192

Energy Use in Manufacturing ? 1998 to 2002  

U.S. Energy Information Administration (EIA) Indexed Site

Use in Manufacturing - 1998 to 2002 Energy Use in Manufacturing provides information related to energy consumption changes within the U.S. manufacturing sector between 1998 and...

193

TRL Computer System Users Guide  

SciTech Connect (OSTI)

We have developed a wiki-based graphical user-interface system that implements our technology readiness level (TRL) uncertainty models. This document contains the instructions for using this wiki-based system.

Engel, David W.; Dalton, Angela C.

2014-01-31T23:59:59.000Z

194

LANSCE | Users | LUG | Topical User Workshop  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to NNSA's call for major NNSA facility upgrades, as well as new end stations at the Lujan Neutron Scattering Center. All current and potential LANSCE users are encouraged to...

195

STANDARD USER AGREEMENT  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

REV 6/3/2010 REV 6/3/2010 Proprietary User Agreement No. PR-14- BETWEEN UT-BATTELLE, LLC. ("CONTRACTOR") Operator of Oak Ridge National Laboratory (hereinafter "Laboratory") under U.S. Department of Energy (DOE) Contract No. DE-AC05-00OR22725 and NAME OF USER INSTITUTION ("USER") (Collectively, "the Parties") The obligations of the Contractor may be transferred and shall apply to any successor in interest to said Contractor continuing the operation of the DOE facilities involved in this Proprietary User Agreement. ARTICLE I. FACILITIES AND SCOPE OF WORK CONTRACTOR will make available to employees, consultants and representatives of USER

196

Manufacturing Science and Technology: Organizations  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Machining Operations Machining Operations Machining Services Electronic Fabrication Manufacturing Process Science & Technology Thin Film, Vacuum, & Packaging Organic Materials Ceramic & Glass Meso Manufacturing & Systems Development Visiting Us AMTTP Center Organizational chart Organizations Our Business areas Manufacturing Science and Technology David Plummer, Director Manufacturing Enterprise Joe M. Harris, Senior Manager Machining Operations Mathew Donnelly, Manager Machining Services Daryl Reckaway, Acting Manager Electronic Fabrication Phillip L. Gallegos, Manager Manufacturing Process Science and Technology Mark F. Smith, Senior Manager Thin Film, Vacuum, and Packaging Mark F. Smith, Acting Manager Organic Materials Mike Kelly, Manager Ceramic and Glass Alex Roesler, Manager

197

Safety for Users  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Safety for Users Safety for Users Safety for Users Print Safety at the ALS The mission of the ALS is "Support users in doing outstanding science in a safe environment." All users and staff participate in creating a culture and environment where performing research using the proper safeguards and fulfilling all safety requirements result in the success of the facility and its scientific program. The documents and guidance below will assist users and staff to achieve these goals. How Do I...? A series of fact sheets that explain what users need to know and do when preparing to conduct experiments at the ALS. Complete Experiment Safety Documentation? Work with Biological Materials? Work with Chemicals? Work with Regulated Soil? Bring and Use Electrical Equipment at the ALS?

198

ALS User Meeting Archives  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

User Meeting Archives Print User Meeting Archives Print Past User Meeting Agendas, Workshops, and Awards Year Agenda Workshops David A. Shirley (Science) Klaus Halbach (Instrumentation) Tim Renner (Service) 2012 2012 User Meeting Agenda 2012 User Meeting Workshops 2012 ALS User Meeting Awards Carl Percival, Dudley Shallcross, Craig Taatjes and David Osborn (Sandia), for making the first direct measurements of the reactions of Criegee intermediates, and showing that their impact on tropospheric chemistry and climate may be substantially greater than previously assumed. 2012 ALS User Meeting Awards Jeff Dickert and Simon Morton of Berkeley Lab's Physical Biosciences Division for the invention and implementation of the Compact Variable Collimator (CVC), which has led to a dramatic increase in productivity of protein crystallography.

199

ALS User Meeting Archives  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ALS User Meeting Archives ALS User Meeting Archives Past User Meeting Agendas, Workshops, and Awards Year Agenda Workshops David A. Shirley (Science) Klaus Halbach (Instrumentation) Tim Renner (Service) 2012 2012 User Meeting Agenda 2012 User Meeting Workshops 2012 ALS User Meeting Awards Carl Percival, Dudley Shallcross, Craig Taatjes and David Osborn (Sandia), for making the first direct measurements of the reactions of Criegee intermediates, and showing that their impact on tropospheric chemistry and climate may be substantially greater than previously assumed. 2012 ALS User Meeting Awards Jeff Dickert and Simon Morton of Berkeley Lab's Physical Biosciences Division for the invention and implementation of the Compact Variable Collimator (CVC), which has led to a dramatic increase in productivity of protein crystallography.

200

NSLS User Access | Training  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Training Training Training for New Users and Users with Expired Training and/or Badges: All new users and users with expired badges must complete or update the training modules shown below prior to access to the experimental floor. The training can be completed online prior to arrival at the NSLS and is strongly recommended to save considerable time during check-in at the Guest, User, Visitor (GUV) Center in Building 400. Please note each training module is followed by an exam which asks for your name and guest number. If you do not already have a guest number, leave this entry blank. All new users and users with expired badges MUST arrive on a weekday (no weekends or holidays) and check in at the GUV Center so that your training can be verified and to receive a photo ID badge (new or updated). The GUV

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Advanced Manufacturing Office: Motor Systems  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Motor Systems to Motor Systems to someone by E-mail Share Advanced Manufacturing Office: Motor Systems on Facebook Tweet about Advanced Manufacturing Office: Motor Systems on Twitter Bookmark Advanced Manufacturing Office: Motor Systems on Google Bookmark Advanced Manufacturing Office: Motor Systems on Delicious Rank Advanced Manufacturing Office: Motor Systems on Digg Find More places to share Advanced Manufacturing Office: Motor Systems on AddThis.com... Quick Links Energy Resource Center Technical Publications by Energy System Energy-Efficient Technologies Incentives & Resources by Zip Code Better Plants Superior Energy Performance Contacts Motor Systems Photo of Man Checking Motor Performance Motor-driven equipment accounts for 54% of manufacturing electricity use. Dramatic energy and cost savings can be achieved in motor systems by

202

Revolutionizing Manufacturing | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Revolutionizing Manufacturing Revolutionizing Manufacturing Revolutionizing Manufacturing Addthis Saving Energy and Resources 1 of 4 Saving Energy and Resources Thanks to additive manufacturing technology, Oak Ridge National Laboratory was able to fabricate a robotic hand with less energy use and material waste. The novel, lightweight, low-cost fluid powered hand was selected for a 2012 R&D 100 award. | Photo courtesy of Oak Ridge National Laboratory. Partnering with Industry 2 of 4 Partnering with Industry The Energy Department's Manufacturing Demonstration Facility at Oak Ridge National Laboratory includes an array of state-of-the-art additive manufacturing capabilities, allowing researchers and industry to develop innovative manufacturing solutions. | Photo courtesy of Oak Ridge National

203

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

Manufacturing Manufacturing Sector Overview 1991-1994 Energy Information Administration/Manufacturing Consumption of Energy 1994 xiii Why Do We Investigate Energy Use in the Manufacturing Sector? What Data Do EIA Use To Investigate Energy Use in the Manufacturing Sector? In 1991, output in the manufactur- ing sector fell as the country went into a recession. After 1991, however, output increased as the country slowly came out of the recession. Between 1991 and 1994, manufacturers, especially manu- facturers of durable goods such as steel and glass, experienced strong growth. The industrial production index for durable goods during the period increased by 21 percent. Real gross domestic product for durable goods increased a corre- sponding 16 percent. The growth of nondurables was not as strong-- the production index increased by only 9 percent during this time period.

204

Faculty Position in Mechanical Engineering Additive Manufacturing  

E-Print Network [OSTI]

Faculty Position in Mechanical Engineering Additive Manufacturing University of Kansas of additive manufacturing. Exceptional candidates with outstanding qualifications could be considered using additive manufacturing in applications such as, but not limited to the net shape manufacture of

205

Multi-user CDMA detectors for its applications  

E-Print Network [OSTI]

In this thesis, we consider different detectors and compare their performance and complexity when several users are sharing the same frequencies in a synchronous coherent code-division multiple-access (CDMA) system. Practical issues for a possible...

Louichon, Franck

2012-06-07T23:59:59.000Z

206

Seminar Title: Additive Manufacturing Advanced Manufacturing of Polymer and Composite Components  

E-Print Network [OSTI]

Seminar Title: Additive Manufacturing ­ Advanced Manufacturing of Polymer and Composite Components Functionally Integrated Composite Structures, Augsburg, Germany ME Faculty Candidate Abstract: Additive Manufacturing ­ Advanced Manufacturing of Polymer and Composite Components Additive manufacturing technologies

Wisconsin at Madison, University of

207

Plumbing Manufacturer's Institute Ex Parte Communication Regarding...  

Broader source: Energy.gov (indexed) [DOE]

Plumbing Manufacturer's Institute Ex Parte Communication Regarding Showerheads Plumbing Manufacturer's Institute Ex Parte Communication Regarding Showerheads Letter to Department...

208

Advanced Technology Vehicles Manufacturing Incentive Program...  

Broader source: Energy.gov (indexed) [DOE]

Advanced Technology Vehicles Manufacturing Incentive Program Advanced Technology Vehicles Manufacturing Incentive Program A fact sheet detailling the advanced technology vehicles...

209

STATEMENT OF CONSIDERATIONS CLASS WAIVER OF GOVERNMENT PATENT RIGHTS FOR PROPRIETARY USERS OF FACILITIES ESTABLISHED  

Broader source: Energy.gov (indexed) [DOE]

GOVERNMENT PATENT RIGHTS FOR PROPRIETARY USERS OF FACILITIES ESTABLISHED GOVERNMENT PATENT RIGHTS FOR PROPRIETARY USERS OF FACILITIES ESTABLISHED UNDER THE PHOTOVOLTAIC MANUFACTURING INITIATIVE (DE-FOA-0000259) DOE WAIVER NO. W(C) 2011-004 The following is a class patent waiver of the rights of the United States to inventions made or conceived of during the use of facilities that were funded, in at least part, through the Photovoltaic Manufacturing Initiative ("PVMI") by proprietary users. The waiver applies only to the inventions of proprietary users as defined below. In order to avail itself of this class patent waiver, a proprietary user must report the inventions to DOE. DOE' s Solar Energy Technologies Program launched PVMI to support the creation of a robust photovoltaic (PV) manufacturing base in the U.S. The U.S. is a leader in the research and development

210

APS Users Organization  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

APSUO APSUO By-Laws Steering Commitee Employment Meetings Compton Award Franklin Award APS Users Organization The APSUO is responsible for advising the APS Associate Laboratory Director in the following areas: The Organization will serve as an advocacy group for the Facility and its user community. The Organization will provide advice to the ALD on matters affecting the user community. The Organization will assure good communication between the APS user community and the APS management. APSUO By-Laws The by-laws upon which the APS User Organization is based. List of Steering Committee Members Steering committee for the APS Users Organization. Employment Bulletin Board APS-related employment opportunities. APSUO Steering Committee Meetings Minutes and presentations from the APSUO meetings.

211

User Financial Account Form  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

URA REVISED 2/20/13 URA REVISED 2/20/13 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user facilities and to send samples, dewars, or other equipment between SLAC and your institution. To open or renew your SLAC user financial account, complete and submit this form along with a Purchase Order (PO) from your institution. The PO should be made to SLAC National Accelerator Laboratory for the amount of estimated expenditures (the suggested minimum is $1,000). Send this form with the PO (or a letter from the financial officer of your institution) to: Jackie Kerlegan (SSRL) or Theresa Wong (LCLS) User Research Administration, MS 99 User Research Administration, MS 99 SLAC National Accelerator Laboratory

212

JGI User Meeting 2007  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Second Annual Second Annual DOE Joint Genome Institute User Meeting Marriott Hotel Walnut Creek, California March 28-30, 2007 The U.S. Department of Energy Joint Genome Institute (JGI) welcomed its users and collaborators, as well as prospective new users, to the second annual JGI User Meeting. This international gathering of researchers with an interest in sequence-based science offered three days of user presentations, tours, workshops, and poster sessions. This was a unique opportunity to meet fellow users and JGI staff. Sessions and posters in the fields of microbial genomics, microbial communities, eukaryotic genomics, and genome technologies were presented. ©2006-2007, The Regents of the University of California. Last updated May 9, 2007. Disclaimer | Webmaster Agenda

213

User_Login  

Broader source: Energy.gov (indexed) [DOE]

Logging In to SuccessFactors Learning Logging In to SuccessFactors Learning © 2011 SuccessFactors, Inc. - 1 - SuccessFactors Learning Confidential. All rights reserved. Job Aid: Logging In to SuccessFactors Learning Purpose The purpose of this job aid is to guide users through the step-by-step process of logging in to the SuccessFactors Learning Management System (LMS), retrieving your forgotten password and/or user ID, and using the LMS Help system. Task A. Log In to SuccessFactors Learning Enter the web address (URL) of the user application into your browser Address field and press the Enter key. Enter your user ID in the User ID textbox. Enter your password in the Password textbox. Click Sign In. 3 3 Log In to SuccessFactors Learning 5 Steps Task A Retrieve Forgotten Password and/or User

214

User_Navigation  

Broader source: Energy.gov (indexed) [DOE]

Online Learning Center v 6.4 Online Learning Center v 6.4 User Job Aid Navigation © 2012 Department of Energy - 1 - Online Learning Center (OLC) Job Aid: Navigation Purpose The purpose of this job aid is to guide users through the step-by-step process of navigating and identifying areas of the OLC, The Department of Energy's Learning Management System (LMS) user interface, and identifying some commonly used navigation icons. Identify Areas of the User Interface Task A Navigation Tips Task B How to Access in Online Learning Center Task C Online Learning Center v 6.4 User Job Aid Navigation © 2012 Department of Energy - 2 - Online Learning Center (OLC) Task A. Identify Areas of the OLC User Interface (OLC) Top Menu: Use the Home menu options in the top menu to navigate within the Online

215

U-131: Adobe Photoshop TIFF Image Heap Overflow Lets Remote Users...  

Broader source: Energy.gov (indexed) [DOE]

time of this entry. Addthis Related Articles U-002:Adobe Photoshop Elements Multiple Memory Corruption Vulnerabilities U-080: Linux Kernel XFS Heap Overflow May Let Remote Users...

216

Manufacturing consumption of energy 1994  

SciTech Connect (OSTI)

This report provides estimates on energy consumption in the manufacturing sector of the U.S. economy based on data from the Manufacturing Energy Consumption Survey. The sample used in this report represented about 250,000 of the largest manufacturing establishments which account for approximately 98 percent of U.S. economic output from manufacturing, and an expected similar proportion of manufacturing energy use. The amount of energy use was collected for all operations of each establishment surveyed. Highlights of the report include profiles for the four major energy-consuming industries (petroleum refining, chemical, paper, and primary metal industries), and an analysis of the effects of changes in the natural gas and electricity markets on the manufacturing sector. Seven appendices are included to provide detailed background information. 10 figs., 51 tabs.

NONE

1997-12-01T23:59:59.000Z

217

ATF Program Advisory & Users  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

paths for flexibility & efficiency Old documentation not adequate Old hardware (PLC) no longer programmable ATF Program Advisory & Users Meeting, April 2-3,2009 M.Babzien...

218

Programs & User Facilities  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Facilities Programs & User Facilities Enabling remarkable discoveries and tools that transform our understanding of energy and matter and advance national, economic, and energy...

219

User Electrical Equipment Inspections  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

User Electronic and Electrical Equipment Inspection Criteria In order to be in compliance with NEC, OSHA, and DOE regulations all electronic and electrical equipment at the APS...

220

General User Proposals  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Proposals Print General Users are granted beam time through a peer review proposal process. They may use beamlines and endstations provided by the ALS or the Participating Research...

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Manufacturing consumption of energy 1991  

SciTech Connect (OSTI)

This report provides estimates on energy consumption in the manufacturing sector of the US economy. These estimates are based on data from the 1991 Manufacturing Energy Consumption Survey (MECS). This survey--administered by the Energy End Use and Integrated Statistics Division, Office of Energy Markets and End Use, Energy Information Administration (EIA)--is the most comprehensive source of national-level data on energy-related information for the manufacturing industries.

Not Available

1994-12-01T23:59:59.000Z

222

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Machining Machining PDF format (236 kb) MS&T's machining group consists of two departments: Manufacturing Processing, and Manufacturing Processes and Services. The two departments team to build, procure, and assemble unique prototype and production hardware with diverse quality requirements. The in-house capability can manufacture hardware ranging from microscopic to proportions measured in feet and tons. The group's outside contacts and resources are almost boundless. This team's expertise includes: precision machining, welding, fabrication and assembly, aircraft quality sheet metal construction, and explosives machining and assembly. The department can manage a variety of activities: design modifications, in-house fabrication, outside shop selection and surveillance and manufacturing records management.

223

High Pressure Hydrogen Tank Manufacturing  

Broader source: Energy.gov [DOE]

Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011.

224

ITP Nanomanufacturing: Nanomanufacturing Portfolio: Manufacturing...  

Broader source: Energy.gov (indexed) [DOE]

More Documents & Publications Sustainable Nanomaterials Workshop Advanced Manufacturing Office, U.S. Department of Energy Nanocomposite Materials for Lithium-Ion Batteries...

225

Electrolyzer Manufacturing Progress and Challenges  

Broader source: Energy.gov [DOE]

Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011.

226

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

Detailed Tables 28 Energy Information AdministrationManufacturing Consumption of Energy 1994 1. In previous MECS, the term "primary energy" was used to denote the "first use" of...

227

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

1 Energy Information AdministrationManufacturing Consumption of Energy 1994 Introduction The market for natural gas has been changing for quite some time. As part of natural gas...

228

Manufacturing for the Hydrogen Economy Manufacturing Research & Development  

E-Print Network [OSTI]

Manufacturing for the Hydrogen Economy Manufacturing Research & Development of PEM Fuel Cell of the hydrogen and fuel cell technologies needed to move the United States toward a future hydrogen economy of a hydrogen energy economy, moving from today's laboratory-scale fabrication technologies to high

229

The pivotal role of rapid manufacturing in the production of cost-effective customised products  

Science Journals Connector (OSTI)

The concept of rapid manufacturing is emerging from the so-called rapid prototyping technologies where additive rather than subtractive techniques will be used to make parts or even completed assemblies. As no tooling is required, one of the main benefits of rapid manufacturing will be the ability to make cost-effective custom products that could all be entirely individualised to a particular consumer or user. Thus, rapid manufacturing is the enabling technology for true cost-effective custom manufacturing and has the potential to revolutionise the design and manufacturing worlds. This paper will introduce results from a current research project that is being undertaken at Loughborough University looking into the effects that will occur to the logistics and supply chain infrastructure with the advent of rapid manufacturing.

Christopher Tuck; Richard Hague

2006-01-01T23:59:59.000Z

230

Nanotechnology User Facility for  

E-Print Network [OSTI]

A National Nanotechnology User Facility for Industry Academia Government #12;The National Institute of Commerce's nanotechnology user facility. The CNST enables innovation by providing rapid access to the tools new measurement and fabrication methods in response to national nanotechnology needs. www

231

ARM User Survey Report  

SciTech Connect (OSTI)

The objective of this survey was to obtain user feedback to, among other things, determine how to organize the exponentially growing data within the Atmospheric Radiation Measurement (ARM) Climate Research Facility, and identify users preferred data analysis system. The survey findings appear to have met this objective, having received approximately 300 responses that give insight into the type of work users perform, usage of the data, percentage of data analysis users might perform on an ARM-hosted computing resource, downloading volume level where users begin having reservations, opinion about usage if given more powerful computing resources (including ability to manipulate data), types of tools that would be most beneficial to them, preferred programming language and data analysis system, level of importance for certain types of capabilities, and finally, level of interest in participating in a code-sharing community.

Roeder, LR

2010-06-22T23:59:59.000Z

232

Rapid response manufacturing (RRM). Final CRADA report  

SciTech Connect (OSTI)

US industry is fighting to maintain its competitive edge in the global market place. Markets fluctuate rapidly. Companies have to be able to respond quickly with improved, high quality, cost efficient products. Because companies and their suppliers are geographically distributed, rapid product realization is dependent on the development of a secure integrated concurrent engineering environment operating across multiple business entities. The way products are developed and brought to market can be improved and made more efficient through the proper incorporation of emerging technologies implemented in a secure environment. This documents the work done under this CRADA to develop capabilities, which permit the effective application, incorporation, and use of advanced technologies in a secure environment to facilitate the product realization process. Lockheed Martin Energy Systems (LMES), through a CRADA with the National Center for Manufacturing Sciences (NCMS), worked within a consortium of major industrial firms--Ford, General Motors, Texas Instruments, United Technologies, and Eastman Kodak--and several small suppliers of advanced manufacturing technology--MacNeal-Schwendler Corp., Teknowledge Corp., Cimplex Corp., Concentra, Spatial Technology, and Structural Dynamics Research Corp. (SDRC)--to create infrastructure to support the development and implementation of secure engineering environments for Rapid Response Manufacturing. The major accomplishment achieved under this CRADA was the demonstration of a prototypical implementation of a broad-based generic framework for automating and integrating the design-to-manufacturing activities associated with machined parts in a secure NWC compliant environment. Specifically, methods needed to permit the effective application, incorporation, and use of advanced technologies in a secure environment to facilitate the product realization process were developed and demonstrated. An important aspect of this demonstration was the implementation of a Product Information Management System that supports secure concurrent engineering in an open environment.

Cain, W.D. [Lockheed Martin Energy Systems, Inc., Oak Ridge, TN (United States); Waddell, W.L. [National Centers for Manufacturing Sciences, Ann Arbor, MI (United States)

1998-02-10T23:59:59.000Z

233

Demand Activated Manufacturing Architecture  

SciTech Connect (OSTI)

Honeywell Federal Manufacturing & Technologies (FM&T) engineers John Zimmerman and Tom Bender directed separate projects within this CRADA. This Project Accomplishments Summary contains their reports independently. Zimmerman: In 1998 Honeywell FM&T partnered with the Demand Activated Manufacturing Architecture (DAMA) Cooperative Business Management Program to pilot the Supply Chain Integration Planning Prototype (SCIP). At the time, FM&T was developing an enterprise-wide supply chain management prototype called the Integrated Programmatic Scheduling System (IPSS) to improve the DOE's Nuclear Weapons Complex (NWC) supply chain. In the CRADA partnership, FM&T provided the IPSS technical and business infrastructure as a test bed for SCIP technology, and this would provide FM&T the opportunity to evaluate SCIP as the central schedule engine and decision support tool for IPSS. FM&T agreed to do the bulk of the work for piloting SCIP. In support of that aim, DAMA needed specific DOE Defense Programs opportunities to prove the value of its supply chain architecture and tools. In this partnership, FM&T teamed with Sandia National Labs (SNL), Division 6534, the other DAMA partner and developer of SCIP. FM&T tested SCIP in 1998 and 1999. Testing ended in 1999 when DAMA CRADA funding for FM&T ceased. Before entering the partnership, FM&T discovered that the DAMA SCIP technology had an array of applications in strategic, tactical, and operational planning and scheduling. At the time, FM&T planned to improve its supply chain performance by modernizing the NWC-wide planning and scheduling business processes and tools. The modernization took the form of a distributed client-server planning and scheduling system (IPSS) for planners and schedulers to use throughout the NWC on desktops through an off-the-shelf WEB browser. The planning and scheduling process within the NWC then, and today, is a labor-intensive paper-based method that plans and schedules more than 8,000 shipped parts per month based on more than 50 manually-created document types. The fact that DAMA and FM&T desired to move from paper-based manual architectures to digitally based computer architectures gave further incentive for the partnership to grow. FM&T's greatest strength was its knowledge of NWC-wide scheduling and planning with its role as the NWC leader in manufacturing logistics. DAMA's asset was its new knowledge gained in the research and development of advanced architectures and tools for supply chain management in the textiles industry. These complimentary strengths allowed the two parties to provide both the context and the tools for the pilot. Bender: Honeywell FM&T participated in a four-site supply chain project, also referred to as an Inter-Enterprise Pipeline Evaluation. The MSAD project was selected because it involves four NWC sites: FM&T, Pantex, Los Alamos National Laboratory (LANL), and Lawrence Livermore National Laboratory (LLNL). FM&T had previously participated with Los Alamos National Laboratory in FY98 to model a two-site supply chain project, between FM&T and LANL. Evaluation of a Supply Chain Methodology is a subset of the DAMA project for the AMTEX consortium. LANL organization TSA-7, Enterprise Modeling and Simulation, has been involved in AMTEX and DAMA through development of process models and simulations for LANL, the NWC, and others. The FY 1998 and this FY 1999 projects directly involved collaboration between Honeywell and the Enterprise Modeling and Simulation (TSA-7) and Detonation Science and Technology (DX1) organizations at LANL.

Bender, T.R.; Zimmerman, J.J.

2001-02-07T23:59:59.000Z

234

Petrick Technology Trends Of Manufacturing  

E-Print Network [OSTI]

#12;323 Petrick Technology Trends chapter 9 The Future Of Manufacturing Irene Petrick Technology Trends This chapter is a story about the future of manufacturing based on three predictions: � that firms sophisticated modeling and simulation of both new products and production processes; � that additive

235

Manufacturing Blog | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing Manufacturing Blog Manufacturing Blog RSS January 15, 2014 Next-Generation Power Electronics: Reducing Energy Waste and Powering the Future From unleashing more powerful and energy-efficient laptops, cell phones and motors, to shrinking utility-scale inverters from 8,000 pound substations to the size of a suitcase, wide bandgap semiconductors could be one of the keys to our clean energy future. January 6, 2014 Manufacturing Spotlight: Boosting American Competitiveness Find out how the Energy Department is helping bring new clean energy technologies to the marketplace and make manufacturing processes more energy efficient. November 15, 2013 Secretary Moniz Joins President Obama in Visit to Cleveland High-Strength Steel Factory Secretary Moniz and President Obama toured a high-strength steel plant in

236

Advanced Manufacturing | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Advanced Manufacturing Advanced Manufacturing Advanced Manufacturing EERE leads a robust network of researchers and other partners to continually develop cost-effective energy-saving solutions that help make our country run better through increased efficiency — promoting better plants, manufacturing processes, and products; more efficient new homes and improved older homes; and other solutions to enhance the buildings in which we work, shop, and lead our everyday lives. EERE leads a robust network of researchers and other partners to continually develop cost-effective energy-saving solutions that help make our country run better through increased efficiency - promoting better plants, manufacturing processes, and products; more efficient new homes and improved older homes; and other solutions to enhance the buildings in which

237

Manufacturing Fuel Cell Manhattan Project  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to to DOE Fuel Cell Manufacturing Workshop 2011 John Christensen, PE NREL Consultant DOE Fuel Cell Market Transformation Support August 11, 2011 Manufacturing Fuel Cell Manhattan Project √ Identify manufacturing cost drivers to achieve affordability √ Identify best practices in fuel cell manufacturing technology √ Identify manufacturing technology gaps √ Identify FC projects to address these gaps MFCMP Objectives Completed Final Report due out Nov 2010 B2PCOE Montana Tech SME's Industry Academia Government FC Consortiums Power ranges * <0.5 kW (man portable / man wearable) * 0.5 kW< Power range < 10 kW (mobile power) Fuels: Hydrogen and reformed hydrocarbons *Packaged Fuels < 0.5 kW * Near term solution * Move through the supply chain like batteries

238

Manufacturing Data | Data.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Data Data Manufacturing Data/Tools Research/Tech Services Apps Challenges Blogs Let's Talk Manufacturing You are here Data.gov » Communities » Manufacturing Manufacturing Data These Federal datasets contain a wealth of information for manufacturing - either from information in a single dataset or by combining data from more than one place. This site will be enhanced with the addition of new datasets, and new apps using these datasets, as they are developed. Search Terms Category -Any- Geospatial Items per page 25 50 100 Apply Name Downloads Rating TradeStats Express TradeStats Express provides statistics on U.S. merchandise trade at the national and state levels. Data can also be displayed in maps, graphs, tables, or as exports, imports, and trade balances.... Data Extraction

239

T-563: Red Hat Directory Server Bugs Let Local Users Gain Elevated  

Broader source: Energy.gov (indexed) [DOE]

3: Red Hat Directory Server Bugs Let Local Users Gain Elevated 3: Red Hat Directory Server Bugs Let Local Users Gain Elevated Privileges and Remote and Local Users Deny Service T-563: Red Hat Directory Server Bugs Let Local Users Gain Elevated Privileges and Remote and Local Users Deny Service February 23, 2011 - 7:00am Addthis PROBLEM: Red Hat Directory Server Bugs Let Local Users Gain Elevated Privileges and Remote and Local Users Deny Service. PLATFORM: Red Hat Directory Server v8 EL4, Red Hat Directory Server v8 EL5 ABSTRACT: Several vulnerabilities were reported in Red Hat Directory Server. A local user can obtain elevated privileges on the target system. A remote user can cause denial of service conditions. A local user can cause denial of service conditions. A remote user can send multiple simple paged search requests to cause the

240

Trajectory analysis and optimization system (TAOS) user`s manual  

SciTech Connect (OSTI)

The Trajectory Analysis and Optimization System (TAOS) is software that simulates point--mass trajectories for multiple vehicles. It expands upon the capabilities of the Trajectory Simulation and Analysis program (TAP) developed previously at Sandia National Laboratories. TAOS is designed to be a comprehensive analysis tool capable of analyzing nearly any type of three degree-of-freedom, point-mass trajectory. Trajectories are broken into segments, and within each segment, guidance rules provided by the user control how the trajectory is computed. Parametric optimization provides a powerful method for satisfying mission-planning constraints. Althrough TAOS is not interactive, its input and output files have been designed for ease of use. When compared to TAP, the capability to analyze trajectories for more than one vehicle is the primary enhancement, although numerous other small improvements have been made. This report documents the methods used in TAOS as well as the input and output file formats.

Salguero, D.E.

1995-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Out of Bounds Additive Manufacturing Christopher  

E-Print Network [OSTI]

#12;Out of Bounds Additive Manufacturing Christopher Holshouser, Clint Newell, and Sid Palas, Tenn. The Big Area Additive Manufacturing system has the potential to manufacture parts completely) are working on an additive manufacturing (AM) system (Big Area Additive Manufacturing, or BAAM) capable

Pennycook, Steve

242

Beryllium Manufacturing Processes  

SciTech Connect (OSTI)

This report is one of a number of reports that will be combined into a handbook on beryllium. Each report covers a specific topic. To-date, the following reports have been published: (1) Consolidation and Grades of Beryllium; (2) Mechanical Properties of Beryllium and the Factors Affecting these Properties; (3) Corrosion and Corrosion Protection of Beryllium; (4) Joining of Beryllium; (5) Atomic, Crystal, Elastic, Thermal, Nuclear, and other Properties of Beryllium; and (6) Beryllium Coating (Deposition) Processes and the Influence of Processing Parameters on Properties and Microstructure. The conventional method of using ingot-cast material is unsuitable for manufacturing a beryllium product. Beryllium is a highly reactive metal with a high melting point, making it susceptible to react with mold-wall materials forming beryllium compounds (BeO, etc.) that become entrapped in the solidified metal. In addition, the grain size is excessively large, being 50 to 100 {micro}m in diameter, while grain sizes of 15 {micro}m or less are required to meet acceptable strength and ductility requirements. Attempts at refining the as-cast-grain size have been unsuccessful. Because of the large grain size and limited slip systems, the casting will invariably crack during a hot-working step, which is an important step in the microstructural-refining process. The high reactivity of beryllium together with its high viscosity (even with substantial superheat) also makes it an unsuitable candidate for precision casting. In order to overcome these problems, alternative methods have been developed for the manufacturing of beryllium. The vast majority of these methods involve the use of beryllium powders. The powders are consolidated under pressure in vacuum at an elevated temperature to produce vacuum hot-pressed (VHP) blocks and vacuum hot-isostatic-pressed (HIP) forms and billets. The blocks (typically cylindrical), which are produced over a wide range of sizes (up to 183 cm dia. by 61 cm high), may be cut or machined into parts or be thermomechanically processed to develop the desired microstructure, properties, and shapes. Vacuum hot-isostatic pressing and cold-isostatic pressing (CIP) followed by sintering and possibly by a final HIP'ing (CIP/Sinter/HIP) are important in their use for the production of near net-shaped parts. For the same starting powder, a HIP'ed product will have less anisotropy than that obtained for a VHP'ed product. A schematic presentation illustrating the difference between VHP'ing and HIP'ing is shown in Figure I-1. The types of powders and the various beryllium grades produced from the consolidated powders and their ambient-temperature mechanical properties were presented in the consolidation report referred to above. Elevated-temperature properties and the effect of processing variables on mechanical properties are described in the mechanical properties report. Beryllium can also be deposited as coatings as well as freestanding forms. The microstructure, properties, and various methods used that are related to the deposition of beryllium are discussed in the report on beryllium coatings.

Goldberg, A

2006-06-30T23:59:59.000Z

243

Reducing paint waste in a colour sample manufacturing industry  

Science Journals Connector (OSTI)

Colour sample manufacturing industry provides an important support for the paint manufacturers. It manufactures colour samples that help original paint manufacturers to sell paint by allowing potential customers to accurately visualise a specific colour. One of the burning issues in colour sampling manufacturing is accurately predicting the tally gallons. It involves an estimation of paint volume to cover a given surface area of paper. The as-is tally gallons estimation process is rudimentary and largely depends upon the human experience. Ideally, this quantity should be enough to cover the target surface area regardless of colour appearance. However, this is not the case with existing process. Currently, lighter colours run out in the middle of the production run while darker colour appearances have significant amount of left over paint. The amount of painting waste is as high as 15% (by volume) in some cases. The objective of this paper is to present a predictive model to better estimate the tally gallons by minimising painting waste. It presents a case study of a US colour sample manufacturing company. The results show that the proposed multiple linear regression approach reduces the leftover paint significantly.

Bimal Nepal; Bharatendra K. Rai

2010-01-01T23:59:59.000Z

244

Advanced Manufacture of Reflectors  

SciTech Connect (OSTI)

The main project objective has been to develop an advanced gravity sag method for molding large glass solar reflectors with either line or point focus, and with long or short focal length. The method involves taking standard sized squares of glass, 1.65 m x 1.65 m, and shaping them by gravity sag into precision steel molds. The method is designed for high volume manufacture when incorporated into a production line with separate pre-heating and cooling. The performance objectives for the self-supporting glass mirrors made by this project include mirror optical accuracy of 2 mrad root mean square (RMS), requiring surface slope errors <1 mrad rms, a target not met by current production of solar reflectors. Our objective also included development of new methods for rapidly shaping glass mirrors and coating them for higher reflectivity and soil resistance. Reflectivity of 95% for a glass mirror with anti-soil coating was targeted, compared to the present ~94% with no anti-soil coating. Our mirror cost objective is ~$20/m2 in 2020, a significant reduction compared to the present ~$35/m2 for solar trough mirrors produced for trough solar plants. During the first year a custom batch furnace was built to develop the method with high power radiative heating to simulate transfer of glass into a hot slumping zone in a production line. To preserve the original high polish of the float glass on both front and back surfaces, as required for a second surface mirror, the mold surface is machined to the required shape as grooves which intersect the glass at cusps, reducing the mold contact area to significantly less than 1%. The mold surface is gold-plated to reflect thermal radiation. Optical metrology of glass replicas made with the system has been carried out with a novel, custom-built test system. This test provides collimated, vertically-oriented parallel beams from a linear array of co-aligned lasers translated in a perpendicular direction across the reflector. Deviations of each reflected beam from the paraboloid focus give a direct measure of surface slope error. Key findings A gravity sag method for large (2.5 m2) second surface glass solar reflectors has been developed and demonstrated to a uniquely high level of accuracy. Mirror surface slope accuracy of 0.65 mrad in one dimension, 0.85 mrad in 2 dimensions (point focus) has been demonstrated by commercial partner REhnu using this process. This accuracy exceeds by a factor of two current solar reflector accuracy. Our replicas meet the Sunshot accuracy objective of 2 mrad optical, which requires better than 1 mrad rms slope error. Point-focus as well as line-focus mirrors have been demonstrated at 1.65 m x 1.65 m square a unique capability. The new process using simple molds is economical. The molds for the 1.65 m square reflectors are bent and machined steel plates on a counter-weighted flotation support. To minimize thermal coupling by radiative heat transfer, the mold surface is grooved and gilded. The molds are simple to manufacture, and have minimal thermal stresses and distortion in use. Lapping and bending techniques have been developed to obtain better than 1 mrad rms surface mold accuracy. Float glass is sagged into the molds by rapid radiative heating, using a custom high power (350 kW) furnace. The method of manufacture is well suited for small as well as large volume production, and as it requires little capital investment and no high technology, it could be used anywhere in the world to make solar concentrating reflectors. A novel slope metrology method for full 1.65 aperture has been demonstrated, with 25 mm resolution across the face of the replicas. The method is null and therefore inherently accurate: it can easily be reproduced without high-tech equipment and does not need sophisticated calibration. We find by cross calibration with reference trough reflectors from RioGlass that our null-test laser system yields a measurement accuracy better than 0.4 mrad rms slope error. Our system is inexpensive and could have broad application for test

Angel, Roger [University of Arizona

2014-12-17T23:59:59.000Z

245

User_TalentProfile  

Broader source: Energy.gov (indexed) [DOE]

Accessing and Modifying Talent Profile Accessing and Modifying Talent Profile © 2011 SuccessFactors, Inc. - 1 - SuccessFactors Learning Confidential. All rights reserved. Job Aid: Accessing and Modifying Talent Profile Purpose The purpose of this job aid is to guide users through the step-by-step process of accessing their talent profiles, adding information to their profiles, and editing existing talent profile information. Task A. Access Talent Profile Enter the web address (URL) of the user application into your browser Address field and press the Enter key. Enter your user ID in the User ID textbox. Enter your password in the Password textbox. Click Sign In. Access Talent Profile 4 Steps Task A Add Information to Talent Profile Sections 5 Steps Task B Edit Talent Profile Sections

246

REScheck Software User's Guide  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

REScheck Software REScheck Software User's Guide Building Energy Codes Program Table Of Contents Overview ................................................................................... 1 Tutorials ................................................................................. 2 Table Columns and Rows ............................................................. 3 Rows ...................................................................................... 3 Columns ................................................................................. 5 Project Information ..................................................................... 7 Location.................................................................................. 7 Project Type (2006 IECC) ..........................................................

247

JGI Compute User Training  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

JGI Compute JGI Compute User Training Series JGI Compute User Training Series homeh1 Overview NERSC and IT staff will host a series training sessions and open office hours to introduce new services and review best practices for using the Crius cluster. All sessions are hands on, so please bring your laptop. If you are or were a user of any of the following systems, Crius, Rhea, Kronos, Theia, Oceanus or Phoebe, it will be beneficial for you to attend these training sessions. And if you plan to use JGI compute resources in the future, we also encourage you to attend. It will also be an opportunity for JGI compute users to ask questions and give NERSC and IT staff feedback on your requirements. Session 3: February 24th, 2012 1:30-5pm rm 100-101 Agenda 1:30-1:45 - Intro and presentation of the transition schedule we talked

248

Bevalac user's handbook  

SciTech Connect (OSTI)

This report is a users manual on the Bevalac accelerator facility. This paper discuses: general information; the Bevalac and its operation; major facilities and experimental areas; and experimental equipment.

Not Available

1990-04-01T23:59:59.000Z

249

User Manual Extended Video  

E-Print Network [OSTI]

User Manual TDS3VID Extended Video Application Module 071-0328-02 *P071032802* 071032802 #12. . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Extended Video Functions 7. . . . . . . . . . . . Extended Video Conventions 10. . . . . . . . . . . . . . . . . . . Changes to the Video Trigger Menu 11. . . . . . . . . . . . . . Changes to the Display Menu 15

Kleinfeld, David

250

International aeronautical user charges  

E-Print Network [OSTI]

Introduction: 1.1 BACKGROUND AND MOTIVATION Very few issues relating to the international air transportation industry are today as divisive as those pertaining to user charges imposed at international airports and enroute ...

Odoni, Amedeo R.

1985-01-01T23:59:59.000Z

251

User Data Forum Presentations  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

-pcds-user-forum-data-intensive-jun14-1.pdf | pdf | 459 KB T08: ACME - Accelerated Climate Modeling For Energy June 17, 2014 | Author(s): Marcia Branstetter, Katherine Evans, John...

252

User Data Forum Presentations  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

File: T10-Joint-Facilities-User-Forum.pdf | pdf | 7 MB T08: ACME - Accelerated Climate Modeling For Energy June 17, 2014 | Author(s): Marcia Branstetter, Katherine Evans, John...

253

General User Proposals  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Proposals Print Tuesday, 01 June 2010 09:36 General Users are granted beam time through a peer review proposal process. They may use beamlines and endstations provided by the ALS...

254

User Operation Manual  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

SNS-NSSD-TOF-TD-0002 - R00 SNS-NSSD-TOF-TD-0002 - R00 1 SEQUOIA Operations Manual for Users G.E. Granroth SEQUOIA Lead Instrument Scientist A.I. Kolesnikov SEQUOIA Instrument Scientist L.M. DeBeer-Schmitt SEQUOIA Scientific Associate T.E. Sherline Sample Environment Scientist Revised - May 13, 2013 SNS-NSSD-TOF-TD-0002 - R00 2 Abstract The SEQUOIA Operations Manual for Users presents a description of the SEQUOIA spectrometer located at beamline 17 (BL17) of the Spallation Neutron Source (SNS). It is the intent of this manual to inform the user regarding the SEQUOIA spectrometer and available sample environment, to run experiments, to access and analyze the collected data, and to provide the user with other potentially useful information. The first section serves to describe the components of which the instrument is comprised.

255

VOLTTRON: User Guide  

SciTech Connect (OSTI)

This document is a user guide for the deployment of the Transactional Network platform and agent/application development within the VOLTTRON. The intent of this user guide is to provide a description of the functionality of the Transactional Network Platform. This document describes how to deploy the platform, including installation, use, guidance, and limitations. It also describes how additional features can be added to enhance its current functionality.

Lutes, Robert G.; Katipamula, Srinivas; Akyol, Bora A.; Tenney, Nathan D.; Haack, Jereme N.; Monson, Kyle E.; Carpenter, Brandon J.

2014-04-24T23:59:59.000Z

256

Interactive Multiple Scale Small Multiples Andrew S. Forsberg  

E-Print Network [OSTI]

-dependent, include thousands of time steps, and have multiple fields. While mathematical modeling helps users? Motivated by the complex data generated from bat flight simulations in a wind tunnel [8], we designed datasets (e.g., kinematics, anatomical structures, and the wake structure behind bat wings). The views

Laidlaw, David

257

Advanced Manufacturing Policies and Paradigms for Innovation  

Science Journals Connector (OSTI)

...2013 ). 4 About the Advanced Manufacturing Partnership 2.0; www.manufacturing.gov/amp.html. 5 For example , www1.eere.energy.gov/manufacturing/; www.darpa.mil/Our_Work/TTO/Programs/Adaptive_Vehicle_Make__%28AVM...

William B. Bonvillian

2013-12-06T23:59:59.000Z

258

LANSCE | Lujan Center | Industrial Users  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industrial Users The Lujan Neutron Scattering Center offers a diverse set of capabilities and instruments for industrial projects. Industrial users are invited to contact the Lujan...

259

Fermilab | Users' Executive Committee | Home  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Users' Office Fermilab Student and Post Doc Association (FSPA) Fermi Research Alliance LLC (FRA) P5 Report HEPAP APS National User Facility Organization (NUFO) Library of...

260

MST: Organizations: Precision Meso Manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Precision Meso Manufacturing Precision Meso Manufacturing Many engineers and product realization teams at Sandia National Laboratories are currently engaged in efforts to create revolutionary national security products that feature unprecedented functionality in ever-smaller, more portable configurations. In the course of development, the Sandia technology community has realized the need for manufacturing capabilities that expand upon what traditional microfabrication provides. The term “meso,” derived from the Greek mesos, meaning “intermediate” or “in the middle,” describes operations on a length scale that typically ranges from hundreds of micrometers to one centimeter. Meso Manufacturing involves a suite of innovative fabrication and metrology tools that compliment each other to make these products a reality. The Meso

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Prototype Design, Manufacturing, and Testing  

Science Journals Connector (OSTI)

Prototyping describes the practical realization of the theoretical concept of the nonimaging Fresnel lens. The steps that are to be taken in order to get a working prototype of the lens manufactured are as fol...

Dr. Ralf Leutz; Dr. Akio Suzuki

2001-01-01T23:59:59.000Z

262

Laser Additive Manufacturing in GE  

Science Journals Connector (OSTI)

There has been an increasing interest given to laser additive manufacturing (LAM) in recent years from across the global. GE has been one of the leading industries engaging in this...

Peng, Henry; Li, Yanmin; Guo, Rui; Wu, Zhiwei

263

Photovoltaics Manufacturing in Developing Countries  

Science Journals Connector (OSTI)

The need for energy sources in the developing countries might be partially satisfied by using photovoltaic power systems in addition to conventional means. A review of photovoltaic manufacturing in developing ...

G. Darkazalli; S. Hogan

1991-01-01T23:59:59.000Z

264

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

S Y M n i 1 y 2 i (W i ) (W i 1) , Energy Information Administration, Manufacturing Energy Consumption Survey: Methodological Report 1985. Although this report describes 44...

265

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

Survey Design, Survey Design, Implementation, and Estimates 411 Energy Information Administration/Manufacturing Consumption of Energy 1994 Overview of Changes from Previous Surveys Sample Design. The MECS has increased its sample size by roughly 40 percent since the 1991 survey, increasing the designed sample size from 16,054 establishments to 22,922. This increase in size and change in sampling criteria required a departure from using the Annual Survey of Manufactures (ASM) as the MECS sampling frame. For 1994, establishments were selected directly from the 1992 Census of Manufactures (CM) mail file, updated by 1993 ASM. Sample Frame Coverage. The coverage in the 1994 MECS is 98 percent of the manufacturing population as measured in total payroll. The sampling process itself provided that level of coverage, and no special adjustments were

266

Fenner acquires PTFE seal manufacturer  

Science Journals Connector (OSTI)

Fenner Plc has announced the acquisition of substantially all of the operating assets and liabilities of EGC, a Houston-based manufacturer of fluoroplastic seals and other related fluoroplastic precision components.

2006-01-01T23:59:59.000Z

267

Funding Opportunity Announcement for Water Power Manufacturing...  

Energy Savers [EERE]

Funding Opportunity Announcement for Water Power Manufacturing Funding Opportunity Announcement for Water Power Manufacturing April 11, 2014 - 11:23am Addthis On April 11, 2014,...

268

Additive manufacturing: technology, applications and research needs  

Science Journals Connector (OSTI)

Additive manufacturing (AM) technology has been researched and ... complexities that could not be produced by subtractive manufacturing processes. Through intensive research over the past...

Nannan Guo; Ming C. Leu

2013-09-01T23:59:59.000Z

269

A Management Strategy for Additive Manufacturing:.  

E-Print Network [OSTI]

??The thesis is about a Management Strategy for Additive Manufacturing - how engineering change influences the NPD process through the adoption of new manufacturing technology. (more)

Zahn, N.Z.

2014-01-01T23:59:59.000Z

270

Advanced Manufacturing Initiative Improves Turbine Blade Productivity...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Advanced Manufacturing Initiative Improves Turbine Blade Productivity Advanced Manufacturing Initiative Improves Turbine Blade Productivity May 20, 2011 - 2:56pm Addthis This is an...

271

Request for Information (RFI): Advanced Manufacturing Office...  

Broader source: Energy.gov (indexed) [DOE]

Advanced Manufacturing Office (AMO) Software Tools Request for Information (RFI): Advanced Manufacturing Office (AMO) Software Tools July 25, 2014 - 1:00pm Addthis Funding: This...

272

Solar Manufacturing Technology 2 | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Solar Manufacturing Technology 2 Solar Manufacturing Technology 2 The PV awards span the supply chain from novel methods to make silicon wafers, to advanced cell and metallization...

273

Autogenic Pressure Reactions for Battery Materials Manufacture...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Battery Materials Manufacture Technology available for licensing: A unique method for anode and cathode manufacture A one-step, solvent-free reaction for producing unique...

274

2014 American Energy & Manufacturing Competitiveness Summit in...  

Office of Environmental Management (EM)

Council on Competitiveness 9 of 10 Advanced Manufacturing Office Director Mark Johnson delivers the lunch keynote during the American Energy & Manufacturing Competitiveness...

275

National Electrical Manufacturers Association (NEMA) Response...  

Broader source: Energy.gov (indexed) [DOE]

Electrical Manufacturers Association (NEMA) Response to Smart Grid RFI National Electrical Manufacturers Association (NEMA) Response to Smart Grid RFI The National Electrical...

276

Explore Careers in Manufacturing | Department of Energy  

Office of Environmental Management (EM)

in U.S. manufacturing. The Advanced Manufacturing Office (AMO) invests in public-private research and development partnerships and encourages a culture of continuous...

277

Advanced Technology Vehicles Manufacturing Loan Program | Department...  

Broader source: Energy.gov (indexed) [DOE]

Technology Vehicles Manufacturing Loan Program Advanced Technology Vehicles Manufacturing Loan Program ATVM-Program-Application-Overview.pdf More Documents & Publications ATVM...

278

Advanced Technology Vehicles Manufacturing Incentive Program...  

Broader source: Energy.gov (indexed) [DOE]

Advanced Technology Vehicles Manufacturing Incentive Program Advanced Technology Vehicles Manufacturing Incentive Program This is an interim final rule that establishes the...

279

Mother nature as a wire manufacturer | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mother nature as a wire manufacturer Mother nature as a wire manufacturer With computational models, scientists see how microbe directs electrons New research shows how electrons...

280

Process systems engineering of continuous pharmaceutical manufacturing  

E-Print Network [OSTI]

Continuous manufacturing offers a number of operational and financial benefits to pharmaceutical companies. This research examines the critical blending step for continuous pharmaceutical manufacturing and the characteristics ...

Abel, Matthew J

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Mechanical and Manufacturing Engineering Mechatronics Engineering Minor  

E-Print Network [OSTI]

Mechanical and Manufacturing Engineering Mechatronics Engineering Minor Students pursuing a BSc in mechanical or manufacturing engineering have experience and entrepreneurship. Mechatronics is the synergistic combination of mechanical

Calgary, University of

282

Understanding Manufacturing Energy and Carbon Footprints, October...  

Broader source: Energy.gov (indexed) [DOE]

More Documents & Publications Understanding the 2010 Manufacturing Energy and Carbon Footprints U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis U.S....

283

U-173: Symantec Web Gateway Multiple Vulnerabilities | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

3: Symantec Web Gateway Multiple Vulnerabilities 3: Symantec Web Gateway Multiple Vulnerabilities U-173: Symantec Web Gateway Multiple Vulnerabilities May 21, 2012 - 7:00am Addthis PROBLEM: Symantec Web Gateway Multiple Vulnerabilities PLATFORM: 5.0.x prior to 5.0.3 ABSTRACT: Several vulnerabilities were reported in Symantec Web Gateway. A remote user can include and execute arbitrary code on the target system. A remote user can conduct cross-site scripting attacks. A remote user can view/delete/upload files on the target system. Reference Links: SecurityTracker Alert ID: 1027078 CVE-2012-0296 CVE-2012-0297 CVE-2012-0298 CVE-2012-0299 IMPACT ASSESSMENT: Medium Discussion: The management interface does not properly authenticate remote users and does not properly validate user-supplied input. A remote user can cause arbitrary scripting code to be executed by the

284

U-002:Adobe Photoshop Elements Multiple Memory Corruption Vulnerabilities |  

Broader source: Energy.gov (indexed) [DOE]

02:Adobe Photoshop Elements Multiple Memory Corruption 02:Adobe Photoshop Elements Multiple Memory Corruption Vulnerabilities U-002:Adobe Photoshop Elements Multiple Memory Corruption Vulnerabilities October 4, 2011 - 11:00am Addthis PROBLEM: Adobe Photoshop Elements Multiple Memory Corruption Vulnerabilities. PLATFORM: Adobe Photoshop Elements 8.0 and earlier versions for Windows. ABSTRACT: A remote user can create a file that, when loaded by the target user, will execute arbitrary code on the target user's system. reference LINKS: Adobe Advisory: APSA11-03 SecurityTracker Alert ID: 1026132 SecurityFocus: CVE-2011-2443 IMPACT ASSESSMENT: High Discussion: A vulnerability was reported in Adobe Photoshop Elements. A remote user can cause arbitrary code to be executed on the target user's system. A remote user can create a specially crafted '.grd' or '.abr' file that,

285

User Charter Rights and Responsibilities of Neutron Sciences Users  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

-G01182/gim -G01182/gim User Charter Rights and Responsibilities of Neutron Sciences Users Rights of Users: * Be treated with respect and courtesy. * Have details of experiment proposals kept confidential. * Have consultations with instrument staff before proposal submission, during experiment planning, and while evaluating results and analyzing data. * Receive beam time on the basis of external peer evaluation of submitted proposals. Users can

286

Clean Energy Manufacturing Initiative | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Clean Energy Manufacturing Initiative Clean Energy Manufacturing Initiative Clean Energy Manufacturing Initiative July 10, 2013 - 1:52pm Addthis Boosting U.S. competitiveness in clean energy manufacturing Boosting U.S. competitiveness in clean energy manufacturing The Clean Energy Manufacturing Initiative is a strategic integration and commitment of manufacturing efforts across the Office of Energy Efficiency & Renewable Energy's (EERE) clean energy technology offices and Advanced Manufacturing Office, focusing on American competitiveness in clean energy manufacturing. alex was here Addthis Related Articles Manufacturing is the bedrock of the American economy, representing nearly 12 percent of our gross domestic product and providing good, high-paying jobs for middle class families. That's why the Energy Department is working to boost U.S. manufacturing competitiveness. | Photo courtesy of Alcoa.

287

User_RunReports  

Broader source: Energy.gov (indexed) [DOE]

Running Standard Reports Running Standard Reports © 2011 SuccessFactors, Inc. - 1 - SuccessFactors Learning Confidential. All rights reserved. Job Aid: Running Standard Reports Purpose The purpose of this job aid is to guide users through the step-by-step process of running standard reports in SuccessFactors Learning. Task A. Run Standard Report From the Home page, click the Reports easy link. In the Report Name table, locate the report you want to generate. Click the expand icon ( ) to expand the report group. Click the title link. For this example, select the User Curriculum Status Group by Item Details report. Note: Click Help ( ) for additional information on reports. 1 1 2 2 3 3 Run Standard Report 13 Steps Task A SuccessFactors Learning v 6.4 User Job Aid

288

General User Proposal Scores  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

General User Proposal Scores General User Proposal Scores General User Proposal Scores Print Tuesday, 01 June 2010 10:34 Scoring Proposals are scored on a scale of 1 to 5, with 1 being the best score and 5 the worst. Reviewers are requested to use the following ranking schema: Must do High Priority Medium Priority Low priority Don't do Beam time is assigned based on each proposal's score in relation to all other proposals for a given beamline. For beamlines where beamtime requests exceed available beamtime, a cutoff score is assigned after which no beam time is allocated. proposal scores Beam Time Cutoff Scores for the Current Cycle The table below lists the percent of beam time shifts allocated/requested for each beamline, and the cutoff scores, below which no beam time was assigned.

289

User Electrical Inspection Criteria  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

User Electronic and Electrical Equipment Inspection Criteria User Electronic and Electrical Equipment Inspection Criteria Any electrical or electronic equipment users bring to the APS will have to be inspected. In some cases, this inspection will be quite simple, e.g., if the equipment has already been inspected by a Nationally Recognized Testing Laboratory (NRTL) and is used for its designed purpose. Other equipment will require a more thorough inspection (this may include NRTL inspected equipment if it is assembled into an apparatus with other components). The inspection is based on an eight-part list of criteria. Paraphrased, those criteria are: The equipment must be suitable for its intended use (and if appropriate, installation). For example, a heater controller intended to control a 1000W heater cannot be used to control a 2000W heater. The

290

Science Accelerator : User Login  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Login Login The Science Accelerator ALERTS feature will automatically update you regarding newly available information in your specific area(s) of interest. Simply register for the service, then create a search strategy which will be run against information added to . Select a schedule (weekly, monthly, etc.) for receiving the email Alerts. If you are a new patron, Register to learn how to set up Alerts to meet your needs. If you are an existing patron, enter your user name and password in the boxes to login. Once logged in, you may review or modify your search, add a new search and see recent Alerts results. User Name: Password: Remember Me Remember me on this computer. Login Don't have a user name? Register! Forgot your password? Reset your password Alerts The Alerts function allows you to monitor a topic and receive timely

291

Fermilab Users' Meeting, 2007  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

6-7, 2007 6-7, 2007 The annual gathering of the Fermilab Users Organization will be held on June 6-7, 2007. This meeting is an opportunity for discussion of new physics results from the laboratory's experimental program, future initiatives at the lab, and thoughtful presentations from leaders of the scientific policy community. Topics to be covered at the Users Meeting include: Collider Physics Astro-particle Physics Neutrino Physics Future Plans This year, both an Outreach Workshop and a Grad Students' Meeting / Career Night (sponsored by the GSA) will be held in association with the Users Meeting on June 5. Watch this page for links to more information on those associated meetings as they become available. Registration Reserve Tickets (for the public lecture by Dr. George Smoot)

292

User Science Images  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

User Science Images User Science Images User Science Images Sort by: Default | Name | Date (low-high) | Date (high-low) | Category NIMROD-1.png FES: NIMROD Simulation February 18, 2010 | Author(s): Dr. Charlson C. Kim (University of Washington) | Category: Fusion Energy | URL: https://nimrodteam.org/ Download Image: NIMROD-1.png | png | 1.5 MB Trajectory of an energetic ion in a Field Reverse Configuration (FRC) magnetic field. Magnetic separatrix denoted by green surface. Spheres are colored by azimuthal velocity. Image courtesy of Charlson Kim, University of Washington; NERSC repos m487, mp21, m1552 Scheibe.png BER: Pore-Scale Fluid Flow for Subsurface Reactive Transport January 1, 2008 | Author(s): Timothy D. Scheibe, PNNL | Category: Environmental Science | URL: http://http://subsurface.pnl.gov/

293

SOAJ Search : User Login  

Office of Scientific and Technical Information (OSTI)

Login Login The SOAJ Search ALERTS feature will automatically update you regarding newly available information in your specific area(s) of interest. Simply register for the service, then create a search strategy which will be run against information added to . Select a schedule (weekly, monthly, etc.) for receiving the email Alerts. If you are a new patron, Register to learn how to set up Alerts to meet your needs. If you are an existing patron, enter your user name and password in the boxes to login. Once logged in, you may review or modify your search, add a new search and see recent Alerts results. User Name: Password: Remember Me Remember me on this computer. Login Don't have a user name? Register! Forgot your password? Reset your password Alerts The Alerts function allows you to monitor a topic and receive timely

294

APS User News, Issue 73  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

3, September 15, 2011 3, September 15, 2011 CONTENTS DIRECTOR'S CORNER USER MATTERS -- Tweet Time! APS Beamlines Now Tweet Operational Status Info -- Changes to User Electrical Safety Training Requirements -- Groundbreaking for the New Advanced Protein Crystallization Facility -- Meg Vigliocco-Hagen, APS General User Program Administrator, Retires! -- Meet Beverly Knott, New APS Beam Time Access Administrator -- Safety Snippets: Practice Good Housekeeping BRIEFLY NOTED -- 4th Annual Postdoctoral Research Symposium: Registration Deadline September 21 -- 2011 Advanced Light Source Users' Meeting, October 3-5, 2011 -- 2011 SSRL/LCLS Annual Users' Meeting & Workshops, October 22-26, 2011 -- General Users Proposals Now Being Accepted -- Changes to User Training Course Requirements

295

2002 NERSC User Survey Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 User Survey Results 2 User Survey Results Show All | 1 2 3 4 5 ... 11 | Next » 2002 User Survey Results Table of Contents Response Summary User Information Overall Satisfaction and Importance All Satisfaction Questions and Changes from Previous Years Visualization and Grid Computing Web, NIM, and Communications Hardware Resources Software Training User Services Comments about NERSC Response Summary Many thanks to the 300 users who responded to this year's User Survey -- this represents the highest response level in the five years we have conducted the survey. The respondents represent all five DOE Science Offices and a variety of home institutions: see User Information. You can see the FY 2002 User Survey text, in which users rated us on a 7-point satisfaction scale. Some areas were also rated on a 3-point

296

PEM Stack Manufacturing: Industry Status  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

© 2009 BALLARD POWER SYSTEMS INC. ALL RIGHTS RESERVED © 2009 BALLARD POWER SYSTEMS INC. ALL RIGHTS RESERVED JULY 2009 B U I L D I N G A C L E A N E N E R G Y G R O W T H C O M P A N Y B A L L A R D P O W E R S Y S T E M S PEM Stack Manufacturing: Industry Status Duarte R. Sousa, PE August 11, 2011 AUGUST 2009 P A G E 2 Overview of PEM Stack Manufacturing MEA Manufacturing Plate Manufacturing Stack Assembly Stack Conditioning and Testing Package and Ship For each of the four main processes, the following will be provided: 1. A brief history of where we have been; 2. Where we are today; 3. Where we would like to transition to; 4. Gaps and proposals. AUGUST 2009 P A G E 3 PEM Stack Manufacturing: Cost Overview * The MEA was readily identified as the major cost driver in a 10 kW stationary stack. * The precious metal catalyst electrode is the major cost driver for the MEA.

297

Oak Ridge Manufacturing Demonstration Facility (MDF)  

Office of Energy Efficiency and Renewable Energy (EERE)

The Manufacturing Demonstration Facility (MDF) is a collaborative manufacturing community that shares a common RD&D infrastructure. This shared infrastructure provides affordable access to advanced physical and virtual tools for rapidly demonstrating new manufacturing technologies and optimizing critical processes. Oak Ridge National Laboratory is home to AMO's MDF focused on Additive Manufacturing and Low-cost Carbon Fiber.

298

Designing a National Network for Manufacturing Innovation  

E-Print Network [OSTI]

Designing a National Network for Manufacturing Innovation NNMI and The Additive Manufacturing Pilot Introduction · NNMI principles · Public NMMI Design · Pilot Institute on Additive Manufacturing #12;IMI Mission Process, such as Additive Manufacturing An Advanced Material ­ e.g. lightweight, low cost carbon fiber

299

1 - Honeywell Bull in manufacturing automation  

Science Journals Connector (OSTI)

economy, the manufacturing industry has undergone great changes over the past 25 years. Now, with the expansion of computerised manufacturing control applications, computer manufacturers can meet the specialised needs of the manufacturing community. This paper also examines the CIM architecture at all levels, looks at current standards and at Honeywell Bull as a supplier.

R. Anderson

1988-01-01T23:59:59.000Z

300

U-048: HP LaserJet Printers Unspecified Flaw Lets Remote Users Update  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

8: HP LaserJet Printers Unspecified Flaw Lets Remote Users 8: HP LaserJet Printers Unspecified Flaw Lets Remote Users Update Firmware with Arbitrary Code U-048: HP LaserJet Printers Unspecified Flaw Lets Remote Users Update Firmware with Arbitrary Code November 30, 2011 - 8:15am Addthis PROBLEM: HP LaserJet Printers Unspecified Flaw Lets Remote Users Update Firmware with Arbitrary Code . PLATFORM: HP LaserJet Printers manufactured prior to 2009 ABSTRACT A remote user can upgrade the printer's firmware with arbitrary code. reference LINKS: SecurityTracker Alert ID:1026357 HP Security for Imaging and Printing HP Clarifies on Printer Security IMPACT ASSESSMENT: Low Discussion: A vulnerability was reported in some HP LaserJet Printers. A remote user can update the firmware with arbitrary code. A remote user can send a specially crafted print job or specially crafted data to the

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Manufacturing Spotlight: Boosting American Competitiveness | Department of  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing Spotlight: Boosting American Competitiveness Manufacturing Spotlight: Boosting American Competitiveness Manufacturing Spotlight: Boosting American Competitiveness January 6, 2014 - 1:06pm Addthis Libby Wayman Clean Energy Manufacturing Initiative Director Advancing the nation's clean energy manufacturing industry helps to capture the value of U.S. innovation in clean energy technologies, fosters further innovation right here in America, and makes U.S. manufacturers more competitive by reducing their energy costs - all while creating jobs and building a more sustainable planet for future generations. Industry and government are working together to expand American leadership in this sector by bringing new clean energy technologies to the marketplace and making manufacturing processes more energy efficient.

302

Streamlining the additive manufacturing digital spectrum: A systems approach  

Science Journals Connector (OSTI)

Abstract Additive manufacturing (AM) promises great potential benefits for industrial manufacturers who require low volume and functional, highly complex, end-use products. Commercial adoption of AM has been slow due to factors such as quality control, production rates, and repeatability. However, given AM's potential, numerous research efforts are underway to improve the quality of the product realization process. A major area of opportunity is to complement existing efforts with advancements in end-to-end digital implementations of AM processes. New paradigms are needed to support more efficient and consistent design-to-product transformations. Systematically configured digital implementations would facilitate informational transformations through standard interfaces, streamlining the AM digital spectrum. Here, we propose the development of a federated, information systems architecture for additive manufacturing. We establish an information requirements workflow for streamlining information throughput during product realization. The architecture is delivered through the development of a solution stack, including the identification of areas where advancements in information representations will have the highest impact. The architecture will specify the stages of the product realization process, and the interfaces needed to link those stages together. Common data structures and interfaces will allow developers and end users of additive manufacturing technologies to simplify, coordinate, validate, and verify end-to-end digital implementations.

Duck Bong Kim; Paul Witherell; Robert Lipman; Shaw C. Feng

2014-01-01T23:59:59.000Z

303

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ion Beam Manufacture Ion Beam Manufacture PDF format (113 kb) Example sine wave FIB sputtered into initially planar Si substrate Example sine wave FIB sputtered into initially planar Si substrate Sandia Manufacturing Science & Technology's Focused Ion Beam (FIB) laboratory provides an opportunity for research, development and prototyping. Currently, our scientists are developing methods for ion beam sculpting microscale tools, components and devices. This includes shaping of specialty tools such as end-mills, turning tools and indenters. Many of these have been used in ultra-precision machining DOE applications. Additionally, staff are developing the capability to ion mill geometrically-complex features and substrates. This includes the ability to sputter predetermined curved shapes of various symmetries and

304

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

Manufacturing Manufacturing Energy Consumption Survey Forms Form EIA-846A (4-6-95) U.S. Department of Commerce Bureau of the Census Acting as Collecting and Compiling Agent For 1994 MANUFACTURING ENERGY CONSUMPTION SURVEY Public reporting burden for this collection of information is estimated to average 9 hours per response, including the time of reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Energy Information Administration, Office of Statistical Standards, EI-73, 1707 H-Street, NW, Washington, DC 20585; and to the Office of Information and Regulatory Affairs, Office of

305

Manufacturing Services | Data.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Services Services Manufacturing Data/Tools Research/Tech Services Apps Challenges Blogs Let's Talk Manufacturing You are here Data.gov » Communities » Manufacturing Services Do you have a new idea? You may need to file a patent to both develop it and protect it. Find out more below. Search for existing patents Apply for a patent Business Owners Getting a business started, established, and growing is difficult. We want to make that easier. Check out the government services below that are available to businesses, and find out more about what's coming with StartUp America. Start a business Access financing Find opportunities to sell products and services to the government Grow your business Help with exporting for beginners and for experts. Shared Facilities Facilities can be a huge factor in whether you create a new product or

306

Guidelines for Manufacturers and Distributors  

Broader source: Energy.gov [DOE]

The Municipal Solid-State Street Lighting Consortium is intended to be a user's group focused on the needs of participants making investments in street and area lighting which provides a...

307

Manufacturing Energy and Carbon Footprints (2006 MECS)  

Broader source: Energy.gov [DOE]

Energy and Carbon Footprints provide a mapping of energy from supply to end use in manufacturing. They show us where energy is used and lostand where greenhouse gases (GHGs) are emitted. Footprints are available below for 15 manufacturing sectors (representing 94% of all manufacturing energy use) and for U.S. manufacturing as a whole. Analysis of these footprints is also available in the U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis report.

308

The Ceramic Manufacturability Center: A new partnership with US industry  

SciTech Connect (OSTI)

The Ceramic Manufacturability Center (CMC) is a new facility at the Oak Ridge National Laboratory (ORNL) established as a direct response to current US industry needs. It was created as part of a highly integrated program jointly funded by the US Department of Energy Defense Programs, Energy Efficiency and Renewable Energy, and Energy Research divisions. The CMC is staffed by personnel from ORNL and the Y-12 Plant, both managed by Martin Marietta Energy Systems, Inc. (Energy Systems). Its mission is to improve the technology needed to manufacture high-precision ceramic components inexpensively and reliably. This mission can be accomplished by strengthening the US machine tool industry and by joining with ceramic material suppliers and end users to provide a path to commercialization of these ceramic components.

Tennery, V.J. [Oak Ridge National Lab., TN (United States); Morris, T.O. [Oak Ridge Y-12 Plant, TN (United States)

1993-12-01T23:59:59.000Z

309

Power Quality from the Manufacturers Standpoint  

E-Print Network [OSTI]

Power quality is an unstable field (if you'll pardon the double meaning). It's in its infancy; there isn't general agreement on much, not even terminology. As an instrument manufacturer in the field, I'm particularly concerned with two philosophical...

McEachern, A.

310

Big Efficieny for Small Manufacturing  

E-Print Network [OSTI]

Big Efficiency for Small Manufacturing Daniel Trombley American Council for an Energy-Efficient Economy Presented to: Industrial Energy Technology Conference New Orleans, LA May 21, 2014 ESL-IE-14-05-10 Proceedings of the Thrity-Sixth Industrial...-Sized Manufacturers http://www.aceee.org/research-report/ie1401 Daniel Trombley dtrombley@aceee.org www.aceee.org ESL-IE-14-05-10 Proceedings of the Thrity-Sixth Industrial Energy Technology Conference New Orleans, LA. May 20-23, 2014 ...

Trombley, D.

2014-01-01T23:59:59.000Z

311

T-652: Mozilla Thunderbird Bugs Let Remote Users Obtain Cookies and Execute  

Broader source: Energy.gov (indexed) [DOE]

2: Mozilla Thunderbird Bugs Let Remote Users Obtain Cookies and 2: Mozilla Thunderbird Bugs Let Remote Users Obtain Cookies and Execute Arbitrary Code T-652: Mozilla Thunderbird Bugs Let Remote Users Obtain Cookies and Execute Arbitrary Code June 22, 2011 - 2:55pm Addthis PROBLEM: Multiple vulnerabilities were reported in Mozilla Thunderbird. A remote user can cause arbitrary code to be executed on the target user's system. A remote user can obtain cookies from another domain in certain cases. A remote user can create specially crafted HTML that, when loaded by the target user, will trigger a memory corruption error and execute arbitrary code on the target system [CVE-2011-2364, CVE-2011-2374, CVE-2011-2375, CVE-2011-2376]. The code will run with the privileges of the target user. PLATFORM: Mozilla Thunderbird prior to 3.1.11

312

Small Business Customized Excerpts from the Users Guide  

Office of Energy Efficiency and Renewable Energy (EERE)

Small Business Customized Excerpts from the Users Guide, to assist in the process for applying to the Small Business Innovation Research (SBIR) program of the U.S. Department of Energy.

313

Sustainable Manufacturing via Multi-Scale, Physics-Based Process Modeling and Manufacturing-Informed Design, April 2013  

Broader source: Energy.gov [DOE]

Sustainable Manufacturing via Multi-Scale, Physics-Based Process Modeling and Manufacturing-Informed Design

314

Manufacturing Energy and Carbon Footprints  

E-Print Network [OSTI]

Significant opportunities exist for improving energy efficiency in U.S. manufacturing. A first step in realizing these opportunities is to identify how industry is using energy. Where does it come from? What form is it in? Where is it used? How much...

Brueske, S.; Lorenz, T.

2012-01-01T23:59:59.000Z

315

Additive manufacturing method of producing  

E-Print Network [OSTI]

Additive manufacturing method of producing silver or copper tracks on polyimide film Problem/stripping) using an additive process support by a novel bio- degradable photo-initiator package. technology. Building on previous work by Hoyd- Gigg Ng et al. [1,2], Heriot-Watt has developed an additive film

Painter, Kevin

316

User_Sup_Registration  

Broader source: Energy.gov (indexed) [DOE]

Registration (Supervisor) Registration (Supervisor) © 2011 SuccessFactors, Inc. - 1 - SuccessFactors Learning Confidential. All rights reserved. Job Aid: Registration (Supervisor) Purpose The purpose of this job aid is to guide supervisor users through the step-by-step process of managing the registration of employees into scheduled offerings within SuccessFactors Learning. Task A. Register Employees in a Scheduled Offering From the Home page, click the My Employees tab. Click the Register/Withdraw Employees Supervisor Link. View Employee's Registrations 3 Steps Task C Withdraw Employees from a Scheduled Offering - 14 Steps Task B Register Employees in a Scheduled Offering - 17 Steps Task A 1 1 2 2 SuccessFactors Learning v 6.4 User Job Aid Registration (Supervisor)

317

NERSC Users Group  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

NUGEX NUGEX NUG Executive Committee (NUGEX) NUGEX is the voice of the user community to NERSC and DOE. While all NUG events are open to all NERSC users, NUGEX members regularly participate in the monthly teleconfernces and the annual face-to-face meeting. NUGEX is consulted on many NERSC policy issues, e.g., batch configurations, disk quotas, services and training offerings. Members of NUGEX also participate in their office's NERSC Requirements Reviews of High Performance Computing and Storage. There are three representatives from each office and three members-at-large. Name Institution Email Address DOE Office Term Expires PI's Project Title Mark Adams Columbia University mark.adams@columbia.edu ASCR Dec 2015 Composable Hierarchically Nested Solvers Anubhav Jain Berkeley Lab

318

NERSC User Environment  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Environment Environment NERSC User Environment Home Directories, Shells and Startup Files All NERSC systems (except PDSF) use global home directories, which are are pre-populated with startup files (also known as dot files) for all available shells. NERSC fully supports bash, csh, and tcsh as login shells. Other shells (ksh, sh, and zsh) are also available. The default shell at NERSC is csh. Changing Your Default Login Shell Use the NERSC Information management (NIM) portal if you want to to change your default login shell. To do this, select Change Shell from the NIM Actions pull-down menu. Managing Your Startup Files The "standard" dot-files are symbolic links to read-only files that NERSC controls. For each standard dot-file, there is a user-writable ".ext" file.

319

User Facility Science Highlights  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

user-facilities/highlights/ The Office of Science user-facilities/highlights/ The Office of Science is the single largest supporter of basic research in the physical sciences in the United States, providing more than 40 percent of total funding for this vital area of national importance. It oversees - and is the principal federal funding agency of - the Nation's research programs in high-energy physics, nuclear physics, and fusion energy sciences. en {611EDD39-818D-4CBA-BFD7-9568495C1566}http://science.energy.gov/bes/highlights/2013/bes-2013-09-a/ The Role of Stripes in Superconducting Behavior Using neutron diffraction, movement of charged atoms arranged as "stripes"

320

User_Sup_Overview  

Broader source: Energy.gov (indexed) [DOE]

Employees (Supervisors) Employees (Supervisors) © 2011 SuccessFactors, Inc. - 1 - SuccessFactors Learning Confidential. All rights reserved. Job Aid: Managing Employees (Supervisors) Purpose The purpose of this job aid is to guide supervisor users through the step-by-step process of managing employees within SuccessFactors Learning. Task A. Open and View a Employee's Record From the Home page, select the My Employees tab. 1 1 Run Reports 5 Steps Task C Approve or Deny Training Requests 9 Steps Task B Open and View an Employee's Record 5 Steps Task A SuccessFactors Learning v 6.4 User Job Aid Managing Employees (Supervisors) © 2011 SuccessFactors, Inc. - 2 - SuccessFactors Learning Confidential. All rights reserved. The My Employees section is designed to

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

User_LaunchSurvey  

Broader source: Energy.gov (indexed) [DOE]

and Completing Assigned Survey and Completing Assigned Survey © 2011 SuccessFactors, Inc. - 1 - SuccessFactors Learning Confidential. All rights reserved. Job Aid: Launching and Completing Assigned Survey Purpose The purpose of this job aid is to guide users through the step-by-step process of launching and completing assigned surveys. Task A. Launch and Complete Assigned Survey From the Home page, filter the To-Do List to show only Surveys. Hover over the course evaluation title. Click Open. 1 2 3 3 2 1 Launch and Complete Assigned Survey 6 Steps Task A SuccessFactors Learning v 6.4 User Job Aid Launching and Completing Assigned Survey © 2011 SuccessFactors, Inc. - 2 - SuccessFactors Learning Complete the survey by selecting the radio button for the appropriate rating

322

User_LaunchOnline  

Broader source: Energy.gov (indexed) [DOE]

Online Content Online Content © 2011 SuccessFactors, Inc. - 1 - SuccessFactors Learning Confidential. All rights reserved. Job Aid: Launching Online Content Purpose The purpose of this job aid is to guide users through the step-by-step process of identifying and launching online content. Task A. Identify Online Content From the Home page, filter the To-Do List to show Online Courses only. The online icon ( ) in the Type column indicates the content type. 2 1 Launch Online Content 5 Steps Task B Identify Online Content 2 Steps Task A 1 2 SuccessFactors Learning v 6.4 User Job Aid Launching Online Content Task B. Launch Online Content From the To-Do List, hover over the title of the item you wish to launch and then click Go to Content.

323

ORPS User Registration Form  

Broader source: Energy.gov (indexed) [DOE]

DEPARTMENT OF ENERGY DEPARTMENT OF ENERGY OPERATIONAL EVENT INFORMATION SYSTEMS REGISTRATION FORM User Registration For: ORPS SUBMIT TO: U.S. DOE: PHONE: 800-473-4375 HSS InfoCenter, HS-1.22, 270CC FAX: 301-903-9823 1000 Independence Ave., SW Washington, DC 20585-0270 (Type or Print) 1. Name__________________________________________________________________________Birth date_______/_______ (Last) (First) (Middle Initial) (Month) (Day) 2.JobTitle_______________________________________________________________________________________________ 3. Company Name________________________________________________________________________________________ 4. Address________________________________________________ Mail Stop______________________________________

324

On the Performance of Energy-Division Multiple Access with Regular Constellations  

Science Journals Connector (OSTI)

In this paper we describe a multiple-access protocol in which different users are assumed to share the same bandwidth and the same pulse. Users employ the same modulation (binary-phase shift keying, quadrature...

Pierluigi Salvo Rossi; Gianmarco Romano

2012-05-01T23:59:59.000Z

325

Tracking Multiple Topics for Finding Interesting Articles  

SciTech Connect (OSTI)

We introduce multiple topic tracking (MTT) for iScore to better recommend news articles for users with multiple interests and to address changes in user interests over time. As an extension of the basic Rocchio algorithm, traditional topic detection and tracking, and single-pass clustering, MTT maintains multiple interest profiles to identify interesting articles for a specific user given user-feedback. Focusing on only interesting topics enables iScore to discard useless profiles to address changes in user interests and to achieve a balance between resource consumption and classification accuracy. iScore is able to achieve higher quality results than traditional methods such as the Rocchio algorithm. We identify several operating parameters that work well for MTT. Using the same parameters, we show that MTT alone yields high quality results for recommending interesting articles from several corpora. The inclusion of MTT improves iScore's performance by 25% in recommending news articles from the Yahoo! News RSS feeds and the TREC11 adaptive filter article collection. And through a small user study, we show that iScore can still perform well when only provided with little user feedback.

Pon, R K; Cardenas, A F; Buttler, D J; Critchlow, T J

2008-01-03T23:59:59.000Z

326

Tracking Multiple Topics for Finding Interesting Articles  

SciTech Connect (OSTI)

We introduce multiple topic tracking (MTT) for iScore to better recommend news articles for users with multiple interests and to address changes in user interests over time. As an extension of the basic Rocchio algorithm, traditional topic detection and tracking, and single-pass clustering, MTT maintains multiple interest profiles to identify interesting articles for a specific user given user-feedback. Focusing on only interesting topics enables iScore to discard useless profiles to address changes in user interests and to achieve a balance between resource consumption and classification accuracy. Also by relating a topic's interestingness to an article's interestingness, iScore is able to achieve higher quality results than traditional methods such as the Rocchio algorithm. We identify several operating parameters that work well for MTT. Using the same parameters, we show that MTT alone yields high quality results for recommending interesting articles from several corpora. The inclusion of MTT improves iScore's performance by 9% to 14% in recommending news articles from the Yahoo! News RSS feeds and the TREC11 adaptive filter article collection. And through a small user study, we show that iScore can still perform well when only provided with little user feedback.

Pon, R K; Cardenas, A F; Buttler, D J; Critchlow, T J

2007-02-15T23:59:59.000Z

327

Multiple-user quantum information theory for optical communication channels  

E-Print Network [OSTI]

Research in the past decade has established capacity theorems for point-to-point bosonic channels with additive thermal noise, under the presumption of a conjecture on the minimum output von Neumann entropy. In the first ...

Guha, Saikat, 1980-

2008-01-01T23:59:59.000Z

328

U-277: Google Chrome Multiple Flaws Let Remote Users Execute...  

Broader source: Energy.gov (indexed) [DOE]

A crash may occur in Skia text rendering CVE-2012-2900. A race condition may occur in audio device handling CVE-2012-5108. An out-of-bounds read may occur in ICU regex...

329

Biomass Feedstock National User Facility  

Broader source: Energy.gov [DOE]

Breakout Session 1BIntegration of Supply Chains I: Breaking Down Barriers Biomass Feedstock National User Facility Kevin L. Kenney, Director, Biomass Feedstock National User Facility, Idaho National Laboratory

330

MagLab - User Awards  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Users Hub Arrow User Awards Scientists who do research at the MagLab are often honored for their excellent work. Christopher Reddy 2014 C.C. Patterson Award (December 2013) Chris...

331

Explore Careers in Manufacturing | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Careers in Manufacturing Careers in Manufacturing Explore Careers in Manufacturing About the Advanced Manufacturing Office The Advanced Manufacturing Office (AMO) invests in public-private research and development partnerships and encourages a culture of continuous improvement in corporate energy management to bring about a transformation in U.S. manufacturing. Image of scientists examining an experiment. back to top What types of jobs are available? Innovation Process Design & Development Engineers Mechanical Electrical Chemical Biochemical Health Safety Environmental Scientists Materials Computer Automation Software Energy Storage Production Engineers Industrial systems Process Materials Equipment Controls Supply Chain Logistics Quality Control Maintenance, Installation & Repair Machinists Efficient Use

332

Manufacturers' View on Benchmarking and Disclosure  

U.S. Energy Information Administration (EIA) Indexed Site

Association of Electrical and Association of Electrical and Medical Imaging Equipment Manufacturers Manufacturing Solutions for Energy Efficiency in Buildings Patrick Hughes Policy Director, High Performance Buildings National Electrical Manufacturers Association The Association of Electrical and Medical Imaging Equipment Manufacturers What is NEMA? The Association of Electrical Equipment and Medical Imaging Manufacturers Which policies encourage energy efficiency in buildings? Energy Savings Performance Contracts Tax Incentives Shaheen- Portman Benchmarking and Disclosure Bullitt Center Seattle, Washington The Association of Electrical Equipment and Medical Imaging Manufacturers Energy Savings Performance Contracts ESPCs pay for efficiency upgrades with

333

Secure Manufacturing | Y-12 National Security Complex  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Secure Secure Manufacturing Secure Manufacturing The depth and breadth of Y-12's manufacturing capabilities and expertise enable Y-12 to address current and emerging national security challenges by providing leadership and direction to perform the following activities: solving unique, high-risk manufacturing problems; eliminating the most difficult manufacturability and development obstacles; protecting classified and proprietary materials, components, and information; developing unique technologies to optimize manufacturing and systems performance; and executing projects cost effectively and with timeliness. Y-12 accomplishes this mission to meet the national security challenges of today and those of the future, with capability and expertise in the following areas:

334

Batteries - Materials Processing and Manufacturing Breakout session  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Materials Processing and Manufacturing Materials Processing and Manufacturing Breakout Session #1 - Discussion of Performance Targets and Barriers Comments on the Achievability of the Targets * PHEV40 and AEV 100 possible with success in current R&D * Achievable with Li-ion manufacturing improvements and advanced chemistries in current Li-ion R&D * AEV300 more challenging * Requires manufacturing improvements and materials and chemistry improvements * Quantify benefits/ drawbacks of fast charging vs. increased electrode cost Barriers Interfering with Reaching the Targets * Materials cost * Need: Material synthesis in large quantities/ with increased impurities and broader size distributions or advanced manufacturing * Electrode thickness - manufacturing and performance * Separator cost/ performance/ safety

335

MST: Organizations: Manufacturing Processes & Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Manufacturing Processing Manufacturing Processing Manufacturing Process, Science, and Technology Mark Smith Mark Smith, Senior Manager Manufacturing Process Science and Technology conducts research and development on advanced manufacturing process and materials technologies. It provides manufacturing process development, technical consulting, and technology transfer to support Sandia product realization needs. This organization also provides prototype fabrication and specialized production services, as required, to support Sandia missions. Departments Dianna Blair Mike Kelly Alex Roesler Paul C. McKey Thin Film, Vacuum, and Packaging Organic Materials Ceramics and Glass Meso Mfg. and System Development Dianna Blair, Manager Mike Kelly, Manager Alex Roesler, Manager Paul C. McKey,

336

Advanced Manufacturing Office: Industrial Assessment Centers (IACs)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industrial Assessment Industrial Assessment Centers (IACs) to someone by E-mail Share Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Facebook Tweet about Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Twitter Bookmark Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Google Bookmark Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Delicious Rank Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Digg Find More places to share Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on AddThis.com... Industrial Assessment Centers (IACs) Learn More Learn how companies have benefited from IAC assessments. Search the IAC Database for recommendations and savings achieved.

337

List of Manufacturing Groups Displayed in the 1998 Manufacturing Energy  

U.S. Energy Information Administration (EIA) Indexed Site

21 manufacturing subsectors (3-digit NAICS codes); 21 manufacturing subsectors (3-digit NAICS codes); 311 Food 312 Beverage and Tobacco Products 313 Textile Mills 314 Textile Product Mills 315 Apparel 316 Leather and Allied Products 321 Wood Products 322 Paper 323 Printing and Related Support 324 Petroleum and Coal Products 325 Chemicals 326 Plastics and Rubber Products 327 Nonmetallic Mineral Products 331 Primary Metals 332 Fabricated Metal Products 333 Machinery 334 Computer and Electronic Products 335 Electrical Equip., Appliances, and Components 336 Transportation Equipment 337 Furniture and Related Products 339 Miscellaneous 6 industry groups (4-digit NAICS codes); 3212 Veneer, Plywood, and Engineered Woods 3219 Other Wood Products 3272 Glass and Glass Products 3312 Steel Products from Purchased Steel 3313 Alumina and Aluminum

338

Top ten list of user-hostile interface design  

SciTech Connect (OSTI)

This report describes ten of the most frequent ergonomic problems found in human-computer interfaces (HCIs) associated with complex industrial machines. In contrast with being thought of as ``user friendly,`` many of these machines are seen as exhibiting ``user-hostile`` attributes by the author. The historical lack of consistent application of ergonomic principles in the HCIs has led to a breed of very sophisticated, complex manufacturing equipment that few people can operate without extensive orientation, training, or experience. This design oversight has produced the need for extensive training programs and help documentation, unnecessary machine downtime, and reduced productivity resulting from operator stress and confusion. Ergonomic considerations affect industrial machines in at least three important areas: (1) the physical package including CRT and keyboard, maintenance access areas, and dedicated hardware selection, layout, and labeling; (2) the software by which the user interacts with the computer that controls the equipment; and (3) the supporting documentation.

Miller, D.P.

1994-10-01T23:59:59.000Z

339

Sustainable manufacturing: evaluation and modeling of environmental impacts in additive manufacturing  

Science Journals Connector (OSTI)

Cleaner production and sustainability are of crucial importance in the field of manufacturing processes where great amounts of energy and materials are being consumed. Nowadays, additive manufacturing technologie...

Florent Le Bourhis; Olivier Kerbrat

2013-12-01T23:59:59.000Z

340

MANUFACTURING CALIFORNIA LAWRENCE BERKELEY LAB POC David Chen  

Broader source: Energy.gov (indexed) [DOE]

MANUFACTURING MANUFACTURING CALIFORNIA LAWRENCE BERKELEY LAB POC David Chen Telephone (510) 486-4506 Email dtchen@lbl.gov Industrial Gas Manufacturing 325120 All Other Basic Inorganic Chemical Manufacturing 325188 Plastics Material and Resin Manufacturing 325211 Explosives Manufacturing 325920 All Other Plastics Product Manufacturing 326199 Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding 331491 Fabricated Structural Metal Manufacturing 332312 Metal Tank (Heavy Gauge) Manufacturing 332420 Other Metal Container Manufacturing 332439 Machine Shops 332710 Electroplating, Plating, Polishing, Anodizing, and Coloring 332813 Industrial valve Manufacturing 332911 Other Ordnance and Accessories Manufacturing 332995 All Other Miscellaneous Fabricated Metal Product Manufacturing

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

A user interface management system  

Science Journals Connector (OSTI)

The design and construction of the user interface to interactive systems is receiving increased attention. This paper describes a user interface management system that allows a designer/developer to focus on the logical functionality of an application ... Keywords: User interface management

David J. Kasik

1982-07-01T23:59:59.000Z

342

U-100: Google Chrome Multiple Vulnerabilities | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

0: Google Chrome Multiple Vulnerabilities 0: Google Chrome Multiple Vulnerabilities U-100: Google Chrome Multiple Vulnerabilities February 10, 2012 - 7:00am Addthis PROBLEM: Multiple vulnerabilities have been reported in Google Chrome, where some have an unknown impact and others can be exploited by malicious people to bypass certain security restrictions, manipulate certain data, and compromise a user's system. PLATFORM: Google Chrome 16.x ABSTRACT: A remote user can create a specially crafted content that, when loaded by the target user, will execute arbitrary code on the target system. The code will run with the privileges of the target user. Reference LINKS: Google Announcements and Release Channel Secunia Advisory SA47938 Security Tracker ID 1026654 IMPACT ASSESSMENT: High Discussion: Multiple vulnerabilities have been reported in Google Chrome, where some

343

Prism users guide.  

SciTech Connect (OSTI)

Prism is a ParaView plugin that simultaneously displays simulation data and material model data. This document describes its capabilities and how to use them. A demonstration of Prism is given in the first section. The second section contains more detailed notes on less obvious behavior. The third and fourth sections are specifically for Alegra and CTH users. They tell how to generate the simulation data and SESAME files and how to handle aspects of Prism use particular to each of these codes.

Weirs, V. Gregory

2012-03-01T23:59:59.000Z

344

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Meso-Machining Meso-Machining PDF format (182 kb) Sandia's Micro-Electro Discharge Machine (Micro-EDM) (above). On the upper right inset is the Micro-EDM electode in copper that was made with the LIGA (electroforming) process. On the lower right inset is a screen fabricated into .006 inch kovar sheet using the Micro-EDM electrode. The walls of the screen are .002 inch wide by .006 inch deep. Meso-machining technologies being developed at Sandia National Laboratories will help manufacturers improve a variety of production processes, tools, and components. Meso-machining will benefit the aerospace, automotive, biomedical, and defense industries by creating feature sizes from the 1 to 50 micron range. Sandia's Manufacturing Science and Technology Center is developing the

345

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

2(94) 2(94) Distribution Category UC-950 Manufacturing Consumption of Energy 1994 December 1997 Energy Information Administration Office of Energy Markets and End Use U.S. Department of Energy Washington, DC 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the U.S. Department of Energy. The information contained herein should be attributed to the Energy Information Administration and should not be construed as advocating or reflecting any policy position of the Department of Energy or any other organization. ii Energy Information Administration/Manufacturing Consumption of Energy 1994 Contacts This publication was prepared by the Energy Information Administration (EIA) under the general direction of W. Calvin

346

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

energy data used in this report do not reflect adjustments for losses in electricity generation or transmission. energy data used in this report do not reflect adjustments for losses in electricity generation or transmission. 1 The manufacturing sector is composed of establishments classified in Standard Industrial Classification 20 through 39 of the U.S. economy as defined 2 by the Office of Management and Budget. The manufacturing sector is a part of the industrial sector, which also includes mining; construction; and agriculture, forestry, and fishing. The EIA also conducts energy consumption surveys in the residential, commercial buildings, and residential transportation sectors: the Residential Energy 3 Consumption Survey (RECS); the Commercial Buildings Energy Consumption Survey (CBECS); and, until recently, the Residential Transportation Energy Consumption Survey (RTECS).

347

Electromagnetic compatibility in semiconductor manufacturing  

SciTech Connect (OSTI)

Electromagnetic Interference (EMI) causes problems in semiconductor manufacturing facilities that range from nuisances to major disruptions of production. In many instances, these issues are addressed in a reactionary rather than proactive manner by individuals who do not have the experience or the equipment necessary to combat EMI problems in a timely, cost effective manner. This approach leads to expensive retrofits, reduced equipment availability, long recovery times, and in some cases, line yield impacts. The goal of electromagnetic compatibility (EMC) in semiconductor manufacturing is to ensure that semiconductor process, metrology, and support equipment operate as intended without being affected by electromagnetic disturbances either transmitted through air (radiated interference), or transferred into the equipment via a conductive media (conducted interference). Rather than being neglected until serious issues arise, EMC should be considered in the early stages of facility design, in order to gain the most benefit at the lowest cost.

Montoya, J.A. [Intel Corp., Hillsboro, OR (United States)

1995-12-31T23:59:59.000Z

348

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

E E U.S. Census Regions and Divisions 489 Energy Information Administration/Manufacturing Consumption of Energy 1994 Source: U.S. Department of Commerce, Bureau of the Census, Statistical Abstract of the United States,1996 (Washington, DC, October 1996), Figure 1. Appendix E U.S. Census Regions and Divisions Appendix F Descriptions of Major Industrial Groups and Selected Industries Executive Office of the President, Office of Management and Budget, Standard Industrial Classification Manual, 1987, pp. 67-263. 54 493 Energy Information Administration/Manufacturing Consumption of Energy 1994 Appendix F Descriptions of Major Industrial Groups and Selected Industries This appendix contains descriptions of industrial groups and selected industries taken from the Standard Industrial

349

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

(MECS) > MECS 1994 Combined Consumption and Fuel Switching (MECS) > MECS 1994 Combined Consumption and Fuel Switching Manufacturing Energy Consumption Survey 1994 (Combined Consumption and Fuel Switching) Manufacturing Energy Consumption Logo Full Report - (file size 5.4 MB) pages:531 Selected Sections (PDF format) Contents (file size 56 kilobytes, 10 pages). Overview (file size 597 kilobytes, 11 pages). Chapters 1-3 (file size 265 kilobytes, 9 pages). Chapter 4 (file size 1,070 kilobytes, 15 pages). Appendix A - Detailed Tables Tables A1 - A8 (file size 1,031 kilobytes, 139 pages). Tables A9 - A23 (file size 746 kilobytes, 119 pages). Tables A24 - A29 (file size 485 kilobytes, 84 pages). Tables A30 - A44 (file size 338 kilobytes, 39 pages). Appendix B (file size 194 kilobytes, 24 pages). Appendix C (file size 116 kilobytes, 16 pages).

350

Fact Sheet: 48C Manufacturing Tax Credits  

Broader source: Energy.gov (indexed) [DOE]

48C Manufacturing Tax Credits 48C Manufacturing Tax Credits In order to foster investment and job creation in clean energy manufacturing, the American Recovery and Reinvestment Act of 2009 included a tax credit for investments in manufacturing facilities for clean energy technologies. The Section 48C Advanced Manufacturing Tax Credit originally provided a 30% investment tax credit to 183 domestic clean energy manufacturing facilities valued at $2.3 billion. Today the IRS has announced the availability of additional 48C allocations, utilizing $150 million remaining tax credits that were never fully monetized by previous awardees. This tax credit program will help build a robust U.S. manufacturing capacity to supply clean energy projects with American-made parts and equipment. These manufacturing facilities will also

351

Objective assessment of manufacturing technology investments  

E-Print Network [OSTI]

Amgen is a biotechnology company with manufacturing plants throughout the world. New manufacturing technologies are constantly being developed and implemented in order to address cost, quality, regulation, and competitive ...

Rothman, Craig Jeremy

2012-01-01T23:59:59.000Z

352

FACT SHEET: 48C MANUFACTURING TAX CREDITS  

Office of Energy Efficiency and Renewable Energy (EERE)

The Advanced Energy Manufacturing Tax Credit Program is helping build a robust U.S. manufacturing capacity to supply clean energy projects with American-made parts and equipment.On February 7,...

353

Upcoming Funding Opportunity for Water Power Manufacturing |...  

Energy Savers [EERE]

Water Power Manufacturing Upcoming Funding Opportunity for Water Power Manufacturing March 24, 2014 - 12:00pm Addthis On March 24, 2014, the U.S. Department of Energy (DOE)...

354

Creation and sustainment of manufacturing technology roadmaps  

E-Print Network [OSTI]

Manufacturing technology roadmaps align manufacturing capability development to product development and the driving business need. Roadmaps allow an executable business strategy to be communicated to all levels of an ...

Grillon, Louis S

2012-01-01T23:59:59.000Z

355

Benefits and Barriers of Smart Manufacturing  

E-Print Network [OSTI]

Decision makers in the industrial sector have only recently started to realize the potential of smart manufacturing to transform manufacturing. The potential gains in efficiency at the process and supply-chain level are still largely unknown...

Trombley, D.; Rogers, E.

2014-01-01T23:59:59.000Z

356

Refrigerator Manufacturers: Order (2013-CE-5341)  

Broader source: Energy.gov [DOE]

DOE ordered Refrigerator Manufacturers, LLC to pay a $8,000 civil penalty after finding Refrigerator Manufacturers had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

357

Building Blocks for the Future of Manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for the Future of Manufacturing Building Blocks for the Future of Manufacturing Scott Smith 2011.05.04 Even though we grew up on opposite sides of the world, my colleague...

358

SunShot Initiative: Solar Manufacturing Technology  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Solar Manufacturing Technology to Solar Manufacturing Technology to someone by E-mail Share SunShot Initiative: Solar Manufacturing Technology on Facebook Tweet about SunShot Initiative: Solar Manufacturing Technology on Twitter Bookmark SunShot Initiative: Solar Manufacturing Technology on Google Bookmark SunShot Initiative: Solar Manufacturing Technology on Delicious Rank SunShot Initiative: Solar Manufacturing Technology on Digg Find More places to share SunShot Initiative: Solar Manufacturing Technology on AddThis.com... Concentrating Solar Power Photovoltaics Research & Development Competitive Awards Diversity in Science and Technology Advances National Clean Energy in Solar Grid Engineering for Accelerated Renewable Energy Deployment Physics of Reliability: Evaluating Design Insights for Component

359

QTR Webinar: Chapter 8- Industry and Manufacturing  

Broader source: Energy.gov [DOE]

The DOE EERE Advanced Manufacturing Office hosted a QTR webinar to obtain input from Leaders in Academia, Industry, and Government on Chapter 8, Industry and Manufacturing, and the associated Technology Assessments.

360

Manufacturing of Plutonium Tensile Specimens  

SciTech Connect (OSTI)

Details workflow conducted to manufacture high density alpha Plutonium tensile specimens to support Los Alamos National Laboratory's science campaigns. Introduces topics including the metallurgical challenge of Plutonium and the use of high performance super-computing to drive design. Addresses the utilization of Abaqus finite element analysis, programmable computer numerical controlled (CNC) machining, as well as glove box ergonomics and safety in order to design a process that will yield high quality Plutonium tensile specimens.

Knapp, Cameron M [Los Alamos National Laboratory

2012-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Clean Energy Manufacturing Initiative Industrial Efficiency and...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industrial Efficiency and Energy Productivity Video Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video Addthis Description Industrial...

362

Manufacturing Energy and Carbon Footprints Scope  

Broader source: Energy.gov [DOE]

List of manufacturing sectors selected for analysis along with North American Industry Classification System (NAICS) code descriptions

363

Webinar: Additive Manufacturing for Fuel Cells  

Broader source: Energy.gov [DOE]

Video recording and text version of the webinar titled "Additive Manufacturing for Fuel Cells," originally presented on February 11, 2014.

364

Honda: North American Manufacturing Facilities | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Facilities From October, 2008 Honda: North American Manufacturing Facilities More Documents & Publications Johnson Controls: EISA Presentation MEMA: Comments AZ Automotive...

365

Industrial Scale Demonstration of Smart Manufacturing Achieving...  

Broader source: Energy.gov (indexed) [DOE]

application of customized sensor driven modeling, measurement simulation technologies, energy management dashboards and a variety of manufacturing metrics for individual...

366

SSRL Users' Organization | Stanford Synchrotron Radiation Lightsource  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

concerned with representing the interests of the SSRL users (see Charter). Users elect members to serve on the Users' Executive Committee (UEC) to carry out the business of...

367

User_ApproveTrainingRequest  

Broader source: Energy.gov (indexed) [DOE]

Approving User Training Requests Approving User Training Requests © 2011 SuccessFactors, Inc. - 1 - SuccessFactors Learning Confidential. All rights reserved. Job Aid: Approving User Training Requests Purpose The purpose of this job aid is to guide users through the step-by-step process of approving a user training request. Task A. Approve a User Training Request From the Home Page, click the You have pending approval requests link in the Alerts box. The Pending Reviews and Approvals page displays and defaults open to the pending approval. Click the expand icon ( ) next to the user's name and/or click the Title link for additional information on the request. Select the Enter Reasons for Approvals or Denials checkbox to allow for comments. Select the Approve radio

368

EMSL User Executive Committe Meeting  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

User Executive User Executive Committee Meeting July 13, 2011 Recommendations Valerie Copie, UEC Chair User Meetings/Workshops EUC Comments & Recommendations: The UEC supports EMSL's focus on specific areas for User meetings and workshops rather than organizing a generalized User Meeting Focused meetings may provide opportunities for users to visit EMSL more often and to participate in team building as envisaged by the new vision of EMSL2.0 The UEC would like EMSL to have broad representations at these workshops to avoid having too many internal participants. The Pore-scale workshop may be a good model to follow for focused workshops While the UEC supports focused workshops, the entire user community should be welcome to attend them and informed about these activities

369

2001 NERSC User Survey Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

1 User Survey Results 1 User Survey Results Show All | 1 2 3 4 5 ... 11 | Next » 2001 User Survey Results Table of Contents Response Summary User Information Overall Satisfaction and Importance All Satisfaction Questions and Changes from Previous Years NERSC Information Management (NIM) System Web and Communications Hardware Resources Software Training User Services Comments about NERSC Response Summary NERSC extends its thanks to the 237 users who participated in this year's survey; this compares with 134 respondents last year. The respondents represent all five DOE Science Offices and a variety of home institutions: see User Information. Your responses provide feedback about every aspect of NERSC's operation, help us judge the quality of our services, give DOE information on how well

370

2006 NERSC User Survey Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

6 User Survey Results 6 User Survey Results Show All | 1 2 3 4 5 ... 15 | Next » 2006 User Survey Results Table of Contents Survey Results Users are invited to provide overall comments about NERSC: Here are the survey results: Respondent Demographics Overall Satisfaction and Importance All Satisfaction, Importance and Usefulness Ratings All Usefulness Topics Hardware Resources Software Visualization and Data Analysis HPC Consulting Services and Communications Web Interfaces Training Comments about NERSC Survey Results Many thanks to the 256 users who responded to this year's User Survey. This represents a response rate of about 13 percent of the active NERSC users. The respondents represent all six DOE Science Offices and a variety of home institutions: see Respondent Demographics. The survey responses provide feedback about every aspect of NERSC's

371

Low Temperature PEM Fuel Cell Manufacturing Needs  

E-Print Network [OSTI]

Low Temperature PEM Fuel Cell Manufacturing Needs Presented by Duarte Sousa, PE Manufacturing Fuel Cell Manhattan Project #12; Cost drivers were identified for the following: · MEA · Plates · Balance of Plant (BOP) · Fuel Processing Manufacturing Fuel Cell Project ­ Phase 1 Note that this presentation

372

Additive manufacturing of metallic tracks on  

E-Print Network [OSTI]

Additive manufacturing of metallic tracks on green ceramic/dielectrics Problem this technology (note: may require additional tooling/ set up time) · Rapid Prototyping & small scale manufacture microelectronics such as manufacture of LTCC ceramic/ Dielectric antenna and rapid PCB prototyping or repair

Painter, Kevin

373

Pseudomonas fluorescens -A robust manufacturing platform  

E-Print Network [OSTI]

Pseudomonas fluorescens -A robust manufacturing platform Reprinted from July/August 2004 Speciality at efficient- ly transporting single chain antibodies and other mammalian-derived proteins. In addition production. Dowpharma, a contract manufacturing services unit of Dow Chemical, has developed a manufacturing

Lebendiker, Mario

374

e! Science News Semiconductor manufacturing technique holds  

E-Print Network [OSTI]

arsenide chips manufactured in multilayer stacks: light sensors, high-speed transistors and solar cellse! Science News Semiconductor manufacturing technique holds promise for solar energy Published semiconductor manufacturing method pioneered at the University of Illinois, the future of solar energy just got

Rogers, John A.

375

EFFECTIVE STRUCTURAL HEALTH MONITORING WITH ADDITIVE MANUFACTURING  

E-Print Network [OSTI]

will be presented for components that can be processed by additive manufacturing (AM) or 3D printing. The origin structures. KEYWORDS : structural health monitoring methodology, 3D printing, additive manufacturing, fatigue, intelligent structure INTRODUCTION Additive manufacturing (AM), also known as 3D Printing or Rapid

Boyer, Edmond

376

Sustainable Manufacturing via Multi-Scale, Physics-Based Process...  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing via Multi-Scale, Physics-Based Process Modeling and Manufacturing-Informed Design, April 2013 Sustainable Manufacturing via Multi-Scale, Physics-Based Process...

377

Request for Information (RFI): Specific Clean Energy Manufacturing...  

Broader source: Energy.gov (indexed) [DOE]

Focus Areas Suitable for a Manufacturing Innovation Institute Request for Information (RFI): Specific Clean Energy Manufacturing Focus Areas Suitable for a Manufacturing...

378

Request for Information (RFI): Clean Energy Manufacturing Topics...  

Broader source: Energy.gov (indexed) [DOE]

Request for Information (RFI): Clean Energy Manufacturing Topics Suitable for a Manufacturing Innovation Institute Request for Information (RFI): Clean Energy Manufacturing Topics...

379

U.S. Advanced Manufacturing and Clean Energy Technology Challenges  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing and Clean Energy Technology Challenges May 6, 2014 AMO Peer Review Mark Johnson Director Advanced Manufacturing Office www.manufacturing.energy.gov This presentation...

380

Private-Public Partnerships for U.S. Advanced Manufacturing  

Broader source: Energy.gov (indexed) [DOE]

Polymer Composite Manufacturing Workshop Crystal City January 13, 2014 Private-Public Partnerships for U.S. Advanced Manufacturing Dr. Frank W. Gayle Advanced Manufacturing...

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

NREL Manufacturing R&D Workshop NREL H2/FC Manufacturing R&D Workshop  

E-Print Network [OSTI]

&D Workshop Fuel Cell Proton Exchange Membrane (PEM) and Solid Oxide Fuel Cell (SOFC) Manufacturing Lines and driving down the cost of fuel cell manufacturing through automation. What are the key technical Membrane Electrode Assembly Manufacturing Hypothetical Fuel Cell Manufacturing Platforms August 11, 2011

382

Network bandwidth requirements for optimized streaming media transmission to interactive users  

Science Journals Connector (OSTI)

In order to minimize bandwidth requirements and improve on demand streaming media distribution scalability, several distribution protocols based on stream sharing by multiple users have been proposed. Despite the great scalability of these protocols ...

Marcelo Maia; Marcus Rocha; talo Cunha; Jussara Almeida; Srgio Campos

2006-11-01T23:59:59.000Z

383

Automatic detection of users' skill levels using high-frequency user interface events  

Science Journals Connector (OSTI)

Computer users have different levels of system skills. Moreover, each user has different levels of skill across different applications and even in different portions of the same application. Additionally, users' skill levels change dynamically as users ... Keywords: Adaptive user interfaces, Expertise, GOMS, Graphical user interfaces, Intelligent user interfaces, Machine learning, Skill, User modeling

Arin Ghazarian; S. Majid Noorhosseini

2010-06-01T23:59:59.000Z

384

User' Software Manual  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

MM-Group Home MM-Group Home MMG Advisory Committees 4-ID-D Home Recent Publications Beamline Info Optics Instrumentation Software User Info FAQs 4-ID-D Beamline Software Manual Introduction Beamline 4-ID-D uses the EPICS platform for beamline control. This is a distributed client-server software where seperate server computers (IOCs) are used to control and monitor different portions of the beamline, and a separate client computer is used for data aquisition and display information. The client computer controls the other IOCs via the local ethernet network. The EPICS client "MEDM" is used for graphically displaying information about the beamline. The command line driven program SPEC is used for scanning adn other data acquisition fruncitons. More information on each of these is found below.

385

Fermilab Users' Executive Committee  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Outreach Subcommittee Outreach Subcommittee Purpose: Work with Fermilab and with external institutions to increase public awareness of the physics being done at Fermilab. Subcommittee Members 2012-2013 Name Organization Email Mandy Rominsky, Chair Fermilab rominsky AT fnal.gov Mary Anne Cummings Muons, Inc macc AT fnal.gov Daniel Kaplan Illinois Institute of Technology kaplan AT iit.edu Ryan Patterson California Institute of Technology rbpatter AT caltech.edu Breese Quinn University of Mississippi quinn AT phy.olemiss.edu Lee Roberts Boston University roberts AT bu.edu Nikos Varelas (ex-officio) University of Illinois at Chicago varelas AT uic.edu Fermilab User University Profiles Fermilab Outreach Fermilab Office of Communication Fermilab Guided Tours Ask a Scientist Program Physics for Everyone Lecture Series

386

users-guide  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Contents Contents Contents Contents ARGONNE NATIONAL LABORATORY 9700 South Cass Avenue Argonne, IL 60439 in ANL/MCS-TM-234 Users Guide for ROMIO: A High-Performance, Portable MPI-IO Implementation by Rajeev Thakur, Robert Ross, Ewing Lusk, William Gropp, Robert Latham Mathematics and Computer Science Division Technical Memorandum No. 234 Revised May 2004, November 2007, April 2010 This work was supported by the Mathematical, Information, and Computational Sciences Division subprogram of the Office of Advanced Scientific Computing Research, U.S. Department of Energy, under Contract W-31-109-Eng-38; and by the Scalable I/O Initiative, a multiagency project funded by the Defense Advanced Research Projects Agency (Contract DABT63-94-C-0049), the Department of Energy, the National Aeronautics and Space Administration,

387

End User Perspective - Industrial  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Solid State Research Center Solid State Research Center DOE Fuel Cell Portable Power Workshop End User Perspective - Industrial Consumer Electronics Power (< 20-50W) Department of Energy Fuel Cell Portable Power Workshop Jerry Hallmark Manager Energy Technologies Lab Motorola Labs Solid State Research Center DOE Fuel Cell Portable Power Workshop Outline * Energy & Power of Portable Devices * Fuel Cell Applications & Cost * Key Requirements & Challenges * Fuels for Portable Fuel Cells * Fuel Transportation Regulations and Standards * Methanol Fuel Cells - Direct Methanol Fuel Cells - Reformed Methanol Fuel Cells * Technical Challenges 2 Solid State Research Center DOE Fuel Cell Portable Power Workshop Portable Electronics Yearly Energy Usage  :KU 1990 1980  :KU

388

User_Self_Register  

Broader source: Energy.gov (indexed) [DOE]

Registering in a Scheduled Offering Registering in a Scheduled Offering © 2011 SuccessFactors, Inc. - 1 - SuccessFactors Learning Confidential. All rights reserved. Job Aid: Self-Registering in a Scheduled Offering Purpose The purpose of this job aid is to guide users through the step-by-step process of locating scheduled offerings and self-registering from the To-Do List, Calendar of Offerings, and the catalog. Each task below demonstrates a different method of registration. Task A. Register from the To-Do List From the Home page, filter the To-Do List to show All Learning. 1 1 Register from the Advanced Catalog Search - 10 Steps Task C Register from To-Do List 6 Steps Task A Register from the Calendar of Offerings 8 Steps Confirm Registration 3 Steps

389

American Wind Manufacturing | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

American Wind Manufacturing American Wind Manufacturing American Wind Manufacturing Addthis 1 of 9 Nordex USA -- a global manufacturer of wind turbines -- delivered and installed turbine components for the Power County Wind Farm, shown here, in Idaho. Image: Nordex USA, Inc. Date taken: 2012-03-05 14:38 2 of 9 Power County Wind Farm - Power County, Idaho. Image: Nordex USA, Inc. Date taken: 2012-03-07 16:16 3 of 9 Power County Wind Farm - Power County, Idaho. Image: Nordex USA, Inc. Date taken: 2012-03-05 17:14 4 of 9 Nordex USA manufacturing facility - Jonesboro, Arkansas. Image: Nordex USA, Inc. Date taken: 2011-05-02 13:55 5 of 9 Nordex USA flagship manufacturing facility in Jonesboro, Arkansas. Image: Nordex USA, Inc. Date taken: 2011-05-02 14:11 6 of 9 Nordex USA flagship manufacturing facility in Jonesboro, Arkansas.

390

HEATING 7. 1 user's manual  

SciTech Connect (OSTI)

HEATING is a FORTRAN program designed to solve steady-state and/or transient heat conduction problems in one-, two-, or three- dimensional Cartesian, cylindrical, or spherical coordinates. A model may include multiple materials, and the thermal conductivity, density, and specific heat of each material may be both time- and temperature-dependent. The thermal conductivity may be anisotropic. Materials may undergo change of phase. Thermal properties of materials may be input or may be extracted from a material properties library. Heating generation rates may be dependent on time, temperature, and position, and boundary temperatures may be time- and position-dependent. The boundary conditions, which may be surface-to-boundary or surface-to-surface, may be specified temperatures or any combination of prescribed heat flux, forced convection, natural convection, and radiation. The boundary condition parameters may be time- and/or temperature-dependent. General graybody radiation problems may be modeled with user-defined factors for radiant exchange. The mesh spacing may be variable along each axis. HEATING is variably dimensioned and utilizes free-form input. Three steady-state solution techniques are available: point-successive-overrelaxation iterative method with extrapolation, direct-solution (for one-dimensional or two-dimensional problems), and conjugate gradient. Transient problems may be solved using one of several finite-difference schemes: Crank-Nicolson implicit, Classical Implicit Procedure (CIP), Classical Explicit Procedure (CEP), or Levy explicit method (which for some circumstances allows a time step greater than the CEP stability criterion). The solution of the system of equations arising from the implicit techniques is accomplished by point-successive-overrelaxation iteration and includes procedures to estimate the optimum acceleration parameter.

Childs, K.W.

1991-07-01T23:59:59.000Z

391

National Library of Energy : User Account  

Office of Scientific and Technical Information (OSTI)

Reset your password Enter either your User Name or Email Address to reset your password. User Name: Email Address: Go...

392

User behavior pattern analysis and prediction based on mobile phone sensors  

Science Journals Connector (OSTI)

More and more mobile phones are equipped with multiple sensors today. This creates a new opportunity to analyze users' daily behaviors and evolve mobile phones into truly intelligent personal devices, which provide accurate context-adaptive and individualized ... Keywords: MAST, context-adaptive, individualized, mobile computing, pattern prediction, sensor, user behavior analysis

Jiqiang Song; Eugene Y. Tang; Leibo Liu

2010-09-01T23:59:59.000Z

393

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Molding, Thermoforming & Compounding Molding, Thermoforming & Compounding PDF format (89 kb) The Manufacturing Science & Technology Center helps customers choose the best materials and techniques for their product by providing a variety of conformal coatings, thermoforming, and compounding materials using established or custom designed processes. The department provides consulting services for injection molding and rubber compounding projects. Capabilities: Thermoforming: Processing thermoplastics such as polycarbonate, polymethyl methacrylate, polypropylene polystyrene, and ABS; producing holding trays, protective caps, and custom covers Injection Molding Consultation: Designing your part to be injection molded, helping you choose the best material for your application, and supporting your interface with injection molding companies

394

POWGEN Users | ORNL Neutron Sciences  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

User Information User Information Announcement: POWGEN has started a new partnership with beam line 11A at the Advanced Photon Source where users can get x-ray data if they have an approved POWGEN proposal. Become a POWGEN User POWGEN Experiment Guide: A - Z POWGEN Mail In Program Guide Shipping Addresses for Samples For more detailed information, please visit the ORNL User Facilities Sample Handling and Shipping page. Non-activated samples coming to SNS: Attention: Special requirements (like refrigeration) To: Neutron Sciences User Sample IPTS # XXXX Oak Ridge National Laboratory / SNS Site Chestnut Ridge, Bldg 8920 Oak Ridge, TN 37830 Activated samples (these will also be brought to SNS but must go through check-in procedures at another on-site location): Attention: Special requirements (like refrigeration)

395

APS User News, Issue 76  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

6, February 21, 2012 6, February 21, 2012 CONTENTS DIRECTOR'S CORNER Special Announcement: George Srajer Appointed Project Director for the APS Upgrade and Deputy ALD USER MATTERS -- Registration Open for 2012 APS/CNM/EMC Users Meeting: Our User Science Shapes the Future! -- CALLING ALL VIDEO MAKERS! Submit Your Films for the "Usies Awards"! -- LCLS-II New Instruments Workshops March 19-22, 2012 -- NUFO Goes To Washington! -- Tax Presentation Available BRIEFLY NOTED -- Recognitions and Honors -- Users Meeting Satellite Workshop: "SAXS Software Packages Irena and Nika" -- New Web Page Offers Quick Help Links for Users -- New Mural Graces the Wall near Viewing Area -- General User Proposal Deadline for 2012-2 Run: March 9, 2012 =====================================================

396

1999 NERSC User Survey Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

9 User Survey Results 9 User Survey Results Show All | 1 2 3 4 5 ... 11 | Next » 1999 User Survey Results Table of Contents Respondent Summary Overall Satisfaction User Information Visualization Consulting and Account Support Information Technology and Communication Hardware Resources Software Training Comments about NERSC All Satisfaction Questions and FY 1998 to FY 1999 Changes Respondent Summary NERSC would like to thank all the users who participated in this year's survey. Your responses provide feedback about every aspect of NERSC's operation, help us judge the quality of our services, give DOE information on how well NERSC is doing, point us to areas we can improve, and show how we compare to similar facilities. This year 177 users responded to our survey, compared with 138 last year.

397

User Calendar | Advanced Photon Source  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

APS User Calendar Date Event November 19, 2013 Proposal Review Panel Meetings December 10, 2013 Beamtime Allocation Committee Meeting January 22, 2014 Joint APSUO Steering Committee and Partner User Council Meeting March 7, 2014 Proposal Deadline Run Cycle 2014-2 March 11-13, 2014 Scientific Advisory Committee Meeting May 12-15, 2014 APS/CNM/EMC Users Meeting May 13, 2014 Partner User Council Meeting May 14, 2014 APSUO Steering Committee Meeting July 9, 2014 Joint APSUO Steering Committee and Partner User Council Meeting July 11, 2014 Proposal Deadline Run Cycle 2014-3 September 17, 2014 Joint APSUO Steering Committee and Partner User Council Meeting November 4-6, 2014 Scientific Advisory Committee Meeting March 16-18, 2015 Scientific Advisory Committee Meeting

398

2000 NERSC User Survey Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

0 User Survey Results 0 User Survey Results Show All | 1 2 3 4 5 ... 10 | Next » 2000 User Survey Results Table of Contents Response Summary User Information Overall Satisfaction and Importance All Satisfaction Questions and FY 1999 to FY 2000 Changes Consulting and Account Support Web and Communications Hardware Resources Software Resources Training User Comments Response Summary NERSC extends its thanks to all the users who participated in this year's survey. Your responses provide feedback about every aspect of NERSC's operation, help us judge the quality of our services, give DOE information on how well NERSC is doing, and point us to areas we can improve. Every year we institute changes based on the survey; the FY 1999 survey resulted in the following changes: We created a long-running queue (12 hours maximum) for jobs using up

399

User_Sup_AssignDelegate  

Broader source: Energy.gov (indexed) [DOE]

Delegates (Supervisor) Delegates (Supervisor) © 2011 SuccessFactors, Inc. - 1 - SuccessFactors Learning Confidential. All rights reserved. Job Aid: Assigning Delegates (Supervisor) Purpose The purpose of this job aid is to guide you through the step-by-step process of using the delegate feature within SuccessFactors Learning. A delegate is another user who you identify to act on the work that you need to complete in the user interface. When you identify a user as a delegate through the Delegates area in your Options and Settings screen, the system adds that user's name to the Delegators list. Typically, you identify a user as a delegate when you want the user to perform some of your tasks. You can use the Delegates area to add or edit the permissions for a delegate, which you might want to do, for example, if you plan to take an

400

User's Guide Agilent Technologies 8560 E-Series and EC-Series  

E-Print Network [OSTI]

User's Guide Agilent Technologies 8560 E-Series and EC-Series Spectrum Analyzers Manufacturing Part. Refer servicing to qualified personnel. To prevent electrical shock do not remove covers. WARNING Before power cable to a socket outlet provided with protective earth contact. WARNING There are many points

Ravikumar, B.

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

V-025: Bugzilla Multiple Cross Site Scripting and Information...  

Broader source: Energy.gov (indexed) [DOE]

to version 3.6.12, 4.0.9, or 4.2.4 or apply patches. Addthis Related Articles V-080: Apple iOS Multiple Vulnerabilities T-568: Mozilla Firefox Bugs Let Remote Users Conduct...

402

2013 ALS User Meeting Highlights  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2013 ALS User Meeting Highlights 2013 ALS User Meeting Highlights 2013 ALS User Meeting Highlights Print This year's ALS User Meeting launched with a welcome from Users' Executive Committee Chair Corie Ralston and LBNL Director Paul Alivisatos. ALS Director Roger Falcone followed with a "state of the ALS" presentation that began with a reminder of the ALS mission, which he noted remains true even in the midst of a government shutdown: "Supporting users in doing outstanding science in a safe environment." Falcone gave the 414 meeting attendees an update on the ALS beamlines, which included good news about increased user numbers thanks to the new RAPIDD access system, enhanced robotics, and remote capabilities. Falcone reflected that ALS metrics continue to represent our highly productive users-the number of journal articles and papers per user that come from ALS research have continued to grow in the past year. Looking forward, Falcone touched on how a proposed ALS upgrade to a diffraction-limited light source would increase scientific capabilities.

403

2013 ALS User Meeting Highlights  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2013 ALS User Meeting Highlights 2013 ALS User Meeting Highlights 2013 ALS User Meeting Highlights Print Thursday, 24 October 2013 09:06 This year's ALS User Meeting launched with a welcome from Users' Executive Committee Chair Corie Ralston and LBNL Director Paul Alivisatos. ALS Director Roger Falcone followed with a "state of the ALS" presentation that began with a reminder of the ALS mission, which he noted remains true even in the midst of a government shutdown: "Supporting users in doing outstanding science in a safe environment." Falcone gave the 414 meeting attendees an update on the ALS beamlines, which included good news about increased user numbers thanks to the new RAPIDD access system, enhanced robotics, and remote capabilities. Falcone reflected that ALS metrics continue to represent our highly productive users-the number of journal articles and papers per user that come from ALS research have continued to grow in the past year. Looking forward, Falcone touched on how a proposed ALS upgrade to a diffraction-limited light source would increase scientific capabilities.

404

User Facility | Argonne National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Materials Center for Nanoscale Materials More Electron Microscopy Center More The Nanoscience and Technology Division hosts the following user facility: The Center for Nanoscale...

405

Library Terms That Users Understand  

E-Print Network [OSTI]

University of Newfoundland Libraries Test methods: user taskUsability of the Academic Library Web Site: ImplicationsDesign," College & Research Libraries (July Library Website

Kupersmith, John

2012-01-01T23:59:59.000Z

406

Fermilab | Users' Executive Committee | History  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Date Established: December 1967 Purpose: To conduct the business affairs of the Fermilab Users Organization between meetings of the general membership. Meeting Pattern: As...

407

Running Jobs Scott French" NERSC User Services Group" New User...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Scott French" NERSC User Services Group" " New User Training" October 30, 2014 Jobs at NERSC * Most j obs a re p arallel, u sing 1 0s t o 1 00,000+ c ores * Produc8on r uns e...

408

EV Everywhere Batteries Workshop - Materials Processing and Manufactur...  

Broader source: Energy.gov (indexed) [DOE]

Materials Processing and Manufacturing Breakout Session Report EV Everywhere Batteries Workshop - Materials Processing and Manufacturing Breakout Session Report Breakout session...

409

U-166: Adobe Shockwave Player Memory Corruption Flaws Let Remote Users  

Broader source: Energy.gov (indexed) [DOE]

6: Adobe Shockwave Player Memory Corruption Flaws Let Remote 6: Adobe Shockwave Player Memory Corruption Flaws Let Remote Users Execute Arbitrary Code U-166: Adobe Shockwave Player Memory Corruption Flaws Let Remote Users Execute Arbitrary Code May 10, 2012 - 7:00am Addthis PROBLEM: Adobe Shockwave Player Memory Corruption Flaws Let Remote Users Execute Arbitrary Code PLATFORM: 11.6.4.634 and prior ABSTRACT: Multiple vulnerabilities were reported in Adobe Shockwave Player. A remote user can cause arbitrary code to be executed on the target user's system. reference LINKS: SecurityTracker Alert ID: 1027037 CVE-2012-2029 CVE-2012-2030 CVE-2012-2031 CVE-2012-2032 CVE-2012-2033 IMPACT ASSESSMENT: High Discussion: A remote user can create specially crafted Shockwave content that, when loaded by the target user, will trigger a memory corruption error and

410

Fermilab Users' Executive Committee  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2012-2013 UEC and GSA Members at October meeting 2012-2013 UEC and GSA Members at October meeting Current Members of the Fermilab Users Executive Committee 2012-2013 Name and Organization Term Email Nikos Varelas, Chair University of Illinois at Chicago 9/11 - 8/13 varelas AT uic.edu Mary Anne Cummings Muons, Inc. 9/12 - 8/14 macc AT fnal.gov Craig Group University of Virginia 9/12 - 8/14 group AT fnal.gov Sergo Jindariani Fermilab 9/11 - 8/13 sergo AT fnal.gov Daniel Kaplan Illinois Institute of Technology 9/11 - 8/13 kaplan AT iit.edu Ryan Patterson California Institute of Technology 9/11 - 8/13 rbpatter AT caltech.edu Greg Pawloski University of Minnesota 9/11 - 8/13 pawloski AT umn.edu Breese Quinn University of Mississippi 9/12 - 8/14 quinn AT phy.olemiss.edu Lee Roberts Boston University 9/12 - 8/14 roberts AT bu.edu Mandy Rominsky

411

NSLS Industrial User Program  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Jun Wang Physicist, Industrial Program Coordinator Phone: 344-2661 Email: junwang@bnl.gov Jun Wang is an Industrial Program Coordinator in the Photon Science Directorate at Brookhaven National Laboratory. She is working closely with industrial researchers as well as beamline staff to identify and explore new opportunities in industrial applications using synchrotron radiation. She has been leading the industrial research program including consultation, collaboration and outreach to the industrial user groups. Before joining BNL in 2008, Jun Wang was a Lead Scientist for a high-resolution high throughput powder diffraction program at the Advanced Photon Source (APS). As a Physicist at BNL, her research focuses on materials structure determination and evolution. Her expertise covers wide range x-ray techniques such as thin film x-ray diffraction and reflectivity, powder diffraction, small angle x-ray scattering, protein solution scattering and protein crystallography, as well as x-ray imaging. Currently she is the project leader of a multi-million dollar project on transmission x-ray microscopy recently funded by the U.S. DOE and the spokesperson for this new imaging beamline at the NSLS. She has also been collaborating with universities and industries for several projects on energy research at the NSLS.

412

Study on Web Analytics Utilizing Segmentation Knowledge in Business to Business Manufacturer Site  

Science Journals Connector (OSTI)

Abstract Web analytics of B to B sites is mandatory for improving usability and leveraging data for marketing. In this study we tried web analytics by some segmentation and confirmed it is effective. We defined some of the segment models (7 segmentation type) and examined web access using some segments. One of the most important segmentations is registered versus unregistered users and we confirmed user behavior is different with each segment. We confirmed key metrics like bounce rate, referrer, and exit page analysis are especially beneficial for B to B manufacturer site enhancement.

Akiyuki Sekiguchi; Kazuhiko Tsuda

2014-01-01T23:59:59.000Z

413

Register with the User Office  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Register with the User Office Print Register with the User Office Print The following registration process MUST be completed online by new and returning users at least TWO WEEKS prior to arrival at the ALS. Not a U.S. citizen? Please look at Documents for Foreign Nationals well ahead of your visit. Bring all relevant documents to the ALS in order to complete your registration. Step 1: Two Weeks Prior to Coming to the ALS New Users: complete and submit an ALS Participating Guest Registration Form - you will automatically receive a registration submission number when the form is submitted. Returning Users: complete and submit a returning user form - you will need your guest (badge) number, which can be found in the Lab Directory, under your name. Notify the ALS User Office of your arrival: This e-mail address is being protected from spambots. You need JavaScript enabled to view it the day and approximate time of your arrival and whether you will travel by car or shuttle bus to the ALS. Please include your registration submission number. The User Office will inform the main gate of your arrival and will prepare your paperwork so there will be no delay on arrival.

414

Register with the User Office  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Register with the User Office Print Register with the User Office Print The following registration process MUST be completed online by new and returning users at least TWO WEEKS prior to arrival at the ALS. Not a U.S. citizen? Please look at Documents for Foreign Nationals well ahead of your visit. Bring all relevant documents to the ALS in order to complete your registration. Step 1: Two Weeks Prior to Coming to the ALS New Users: complete and submit an ALS Participating Guest Registration Form - you will automatically receive a registration submission number when the form is submitted. Returning Users: complete and submit a returning user form - you will need your guest (badge) number, which can be found in the Lab Directory, under your name. Notify the ALS User Office of your arrival: This e-mail address is being protected from spambots. You need JavaScript enabled to view it the day and approximate time of your arrival and whether you will travel by car or shuttle bus to the ALS. Please include your registration submission number. The User Office will inform the main gate of your arrival and will prepare your paperwork so there will be no delay on arrival.

415

Register with the User Office  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Register with the User Office Print Register with the User Office Print The following registration process MUST be completed online by new and returning users at least TWO WEEKS prior to arrival at the ALS. Not a U.S. citizen? Please look at Documents for Foreign Nationals well ahead of your visit. Bring all relevant documents to the ALS in order to complete your registration. Step 1: Two Weeks Prior to Coming to the ALS New Users: complete and submit an ALS Participating Guest Registration Form - you will automatically receive a registration submission number when the form is submitted. Returning Users: complete and submit a returning user form - you will need your guest (badge) number, which can be found in the Lab Directory, under your name. Notify the ALS User Office of your arrival: This e-mail address is being protected from spambots. You need JavaScript enabled to view it the day and approximate time of your arrival and whether you will travel by car or shuttle bus to the ALS. Please include your registration submission number. The User Office will inform the main gate of your arrival and will prepare your paperwork so there will be no delay on arrival.

416

User experience with memory management  

SciTech Connect (OSTI)

Effects on computer users of the introduction of CMM at NOS1.3(485) at Sandia National Laboratories, Albuquerque are reported. Background information on the configuration, operating environment, users, and kinds of applications run on the different machines is given. Then some of the problems associated with CMM are described. Although they were overcome, they were more numerous than anticipated. (RWR)

Lane, G.L.

1980-01-01T23:59:59.000Z

417

Advanced Manufacturing Office: MotorMaster+  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

MotorMaster+ to MotorMaster+ to someone by E-mail Share Advanced Manufacturing Office: MotorMaster+ on Facebook Tweet about Advanced Manufacturing Office: MotorMaster+ on Twitter Bookmark Advanced Manufacturing Office: MotorMaster+ on Google Bookmark Advanced Manufacturing Office: MotorMaster+ on Delicious Rank Advanced Manufacturing Office: MotorMaster+ on Digg Find More places to share Advanced Manufacturing Office: MotorMaster+ on AddThis.com... MotorMaster+ This photo shows the inner workings of an industrial electric motor with gears. In the lower left hand corner are the words "MotorMaster+" and underneath are the words "Motor-Driven Systems." Download MotorMaster+ now! Version: 4.01.01 Release Date: September 21, 2010 Release Notes Metric Unit Measurements: No

418

Help:User page | Open Energy Information  

Open Energy Info (EERE)

A user page is a page about a wiki user; someone who registered on the A user page is a page about a wiki user; someone who registered on the wiki, and is (most probably) a contributor. If you have registered, you can create your own user page. Your user page is linked in the top right. More importantly, others will see links to your user page from various places which assist wiki collaboration. This includes the "Recent changes" and "page history" displays (See Help:Tracking changes). You can also link to your user page within text of a wiki page, which is mainly useful on talk pages when you sign your name. Contents 1 What to put on your user page 1.1 User scratchpad / development area 2 Other people's user pages 2.1 User Contributions 2.2 Editing someone else's page 2.3 User talk pages What to put on your user page

419

APS User News, Issue 70  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

70, July 7, 2011 70, July 7, 2011 CONTENTS 1. DIRECTOR'S CORNER USER MATTERS 2. More User Mysteries Solved! 3. Several APS Users Recognized in Inaugural Class of New American Crystallographic Association Fellows Program 4. Congratulations to Keith Moffat, Winner of the ACA 2011 Patterson Award 5. Paul Fenter Wins Warren Award for X-ray Diffraction Studies 6. Energy, Enthusiasm, Cooperation, and Commitment Characterize NUFO Annual Meeting BRIEFLY NOTED -- Heads Up: User Participation in Upcoming Reviews -- Upcoming General User Proposal Deadlines -- Reminder: Registration for 2011 X-ray Science Gordon Research Conference & Seminar Closes July 9, 2011 -- Shanghai Institute of Applied Physics Workshop on Science with Free-Electron Lasers on August 20-21, 2011 =====================================================

420

APS User News, Issue 82  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2, November 6, 2012 2, November 6, 2012 CONTENTS DIRECTOR'S CORNER USER MATTERS -- APS User Wins Nobel Prize in Chemistry -- Physics, Picasso, and House Paint: X-rays Solve a Mystery -- CALL FOR: APS Workshop Proposals and Invited Speaker Suggestions--Due January 11, 2013! --"There's an app for APS!" BRIEFLY NOTED -- Welcome Susan White-DePace, Associate Manager for User Programs -- Nature.com Launches Scientific Reports -- Sidewalk Construction Begins from APS to Building 314 -- Newly Reduced Speed Limit in 201 Area -- Upcoming Meetings of Interest -- General User Proposal Deadline for Run 2013-2: March 8, 2013 -- Current APS Job Openings -- Save the Date: 2013 APS/CNM/EMC Users Meeting Set for May 6-9, 2013 ==================================================== Instructions for subscribing, unsubscribing, and submitting info

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

2004 NERSC User Survey Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

4 User Survey Results 4 User Survey Results Show All | 1 2 3 4 5 ... 13 | Next » 2004 User Survey Results Table of Contents Response Summary Respondent Demographics Overall Satisfaction and Importance All Satisfaction, Importance and Usefulness Ratings Hardware Resources Software Security and One Time Passwords Visualization and Data Analysis HPC Consulting Services and Communications Web Interfaces Training Comments about NERSC Response Summary Many thanks to the 209 users who responded to this year's User Survey. The respondents represent all six DOE Science Offices and a variety of home institutions: see Respondent Demographics. The survey responses provide feedback about every aspect of NERSC's operation, help us judge the quality of our services, give DOE information on how well NERSC is doing, and point us to areas we can improve. The

422

2005 NERSC User Survey Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

5 User Survey Results 5 User Survey Results Show All | 1 2 3 4 5 ... 10 | Next » 2005 User Survey Results Table of Contents Response Summary Respondent Demographics All Satisfaction, Importance and Usefulness Ratings Hardware Resources Software Visualization and Data Analysis Services and Communications Web Interfaces Training Comments about NERSC Response Summary Many thanks to the 201 users who responded to this year's User Survey. The respondents represent all six DOE Science Offices and a variety of home institutions: see Respondent Demographics. The survey responses provide feedback about every aspect of NERSC's operation, help us judge the quality of our services, give DOE information on how well NERSC is doing, and point us to areas we can improve. The survey results are listed below.

423

V-224: Google Chrome Multiple Vulnerabilities | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

4: Google Chrome Multiple Vulnerabilities 4: Google Chrome Multiple Vulnerabilities V-224: Google Chrome Multiple Vulnerabilities August 22, 2013 - 1:05am Addthis PROBLEM: Multiple vulnerabilities have been reported in Google Chrome, where some have an unknown impact and others can be exploited by malicious, local users to disclose potentially sensitive information and by malicious people to compromise a user's system. PLATFORM: Google Chrome 28.x ABSTRACT: The vulnerabilities are reported in versions prior to 29.0.1547.57 REFERENCE LINKS: Secunia Advisory ID: 1028921 CVE-2013-2887 CVE-2013-2900 CVE-2013-2901 CVE-2013-2902 CVE-2013-2903 CVE-2013-2904 CVE-2013-2905 IMPACT ASSESSMENT: High DISCUSSION: Multiple vulnerabilities have been reported in Google Chrome, where some have an unknown impact and others can be exploited by malicious, local users to disclose

424

U.S. Wind Energy Manufacturing and Supply Chain: A Competitiveness Analysis  

SciTech Connect (OSTI)

The goal of the project was to develop a greater understanding of the key factors determining wind energy component manufacturing costs and pricing on a global basis in order to enhance the competitiveness of U.S. manufacturers, and to reduce installed systems cost. Multiple stakeholders including DOE, turbine OEMs, and large component manufactures will all benefit by better understanding the factors determining domestic competitiveness in the emerging offshore and next generation land-based wind industries. Major objectives of this project were to: 1. Carry out global cost and process comparisons for 5MW jacket foundations, blades, towers, and permanent magnet generators; 2. Assess U.S. manufacturers competitiveness and potential for cost reduction; 3. Facilitate informed decision-making on investments in U.S. manufacturing; 4. Develop an industry scorecard representing the readiness of the U.S. manufacturers to produce components for the next generations of wind turbines, nominally 3MW land-based and 5MW offshore; 5. Disseminate results through the GLWN Wind Supply Chain GIS Map, a free website that is the most comprehensive public database of U.S. wind energy suppliers; 6. Identify areas and develop recommendations to DOE on potential R&D areas to target for increasing domestic manufacturing competitiveness, per DOEs Clean Energy Manufacturing Initiative (CEMI). Lists of Deliverables 1. Cost Breakdown Competitive Analyses of four product categories: tower, jacket foundation, blade, and permanent magnet (PM) generator. The cost breakdown for each component includes a complete Bill of Materials with net weights; general process steps for labor; and burden adjusted by each manufacturer for their process categories of SGA (sales general and administrative), engineering, logistics cost to a common U.S. port, and profit. 2. Value Stream Map Competitiveness Analysis: A tool that illustrates both information and material flow from the point of getting a customer order at the manufacturing plant; to the orders being forwarded by the manufacturing plant to the material suppliers; to the material being received at the manufacturing plant and processed through the system; to the final product being shipped to the Customer. 3. Competitiveness Scorecard: GLWN developed a Wind Industry Supply Chain Scorecard that reflects U.S. component manufacturers readiness to supply the next generation wind turbines, 3MW and 5MW, for land-based and offshore applications. 4. Wind Supply Chain Database & Map: Expand the current GLWN GIS Wind Supply Chain Map to include offshore elements. This is an on-line, free access, wind supply chain map that provides a platform for identifying active and emerging suppliers for the land-based and offshore wind industry, including turbine component manufacturers and wind farm construction service suppliers.

Fullenkamp, Patrick H; Holody, Diane S

2014-06-15T23:59:59.000Z

425

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sol-Gel Glasses Sol-Gel Glasses PDF format (74 kb) Sol Gel Sol Gel Coating with Sol-Gel Glasses Coating with Sol-Gel Glasses The Manufacturing Science & Technology Center conducts process development and scale-up of ceramic and glass materials prepared by the sol-gel process. Sol-gel processing uses solutions prepared at low temperature rather than high temperature powder processing to make materials with controlled properties. A precursor sol-gel solution (sol) is either poured into a mold and allowed to gel or is diluted and applied to a substrate by spinning, dipping, spraying, electrophoresis, inkjet printing or roll coating. Controlled drying of the wet gel results in either a ceramic or glass bulk part or a thin film on a glass, plastic, ceramic or metal substrate.

426

High Pressure Hydrogen Tank Manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Workshop Workshop High Pressure Hydrogen Tank Manufacturing Mark Leavitt Quantum Fuel Systems Technologies Worldwide, Inc. August 11, 2011 This presentation does not contain any proprietary, confidential, or otherwise restricted information History of Innovations... Announced breakthrough in all-composite lightweight, high capacity, low-cost fuel storage technologies. * Developed a series of robust, OEM compatible electronic control products. Developed H 2 storage system for SunLine Tran-sit Hythane® bus. Awarded patent for integrated module including in-tank regulator * Developed high efficiency H 2 fuel storage systems for DOE Future Truck programs Developed H 2 storage and metering system for Toyota's FCEV platform. First to certify 10,000 psi systems in Japan

427

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Electro Microfluidic Dual In-line Package (EMDIP) Electro Microfluidic Dual In-line Package (EMDIP) PDF format (115 kb) EMDIP diagram EMDIP Diagram Microfluidics is experiencing explosive growth in new product developments. Already there are many commercial applications for electro microfluidic devices such as chemical sensors, biological sensors, and drop ejectors for both printing and chemical analysis. The number of surface micromachined microfluidic devices is likely to increase. Manufacturing efficiency and integration of microfluidics with electronics will become important. In order to realize applications for these devices, an efficient method for packaging microfluidic devices is needed. Responding to this need, researchers at Sandia developed the Electro Microfluidic Dual In-Line Package (EMDIP) and the Fluidic Printed Wiring Board (FPWB).

428

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

A24. A24. Total Inputs of Energy for Heat, Power, and Electricity Generation by Program Sponsorship, Industry Group, Selected Industries, and Type of Energy- Management Program, 1994: Part 1 (Estimates in Trillion Btu) See footnotes at end of table. Energy Information Administration/Manufacturing Consumption of Energy 1994 285 SIC Management Any Type of Sponsored Self-Sponsored Sponsored Sponsored Code Industry Group and Industry Program Sponsorship Involvement Involvement Involvement Involvement a No Energy Electric Utility Government Third Party Type of Sponsorship of Management Programs (1992 through 1994) RSE Row Factors Federal, State, or Local RSE Column Factors: 0.7 1.1 1.0 0.7 1.9 0.9 20-39 ALL INDUSTRY GROUPS Participation in One or More of the Following Types of Programs . .

429

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

A9. A9. Total Inputs of Energy for Heat, Power, and Electricity Generation by Fuel Type, Census Region, and End Use, 1994: Part 1 (Estimates in Btu or Physical Units) See footnotes at end of table. Energy Information Administration/Manufacturing Consumption of Energy 1994 166 End-Use Categories (trillion Btu) kWh) (1000 bbl) (1000 bbl) cu ft) (1000 bbl) tons) (trillion Btu) Total (million Fuel Oil Diesel Fuel (billion LPG (1000 short Other Net Distillate Natural and Electricity Residual Fuel Oil and Gas Breeze) a b c Coal (excluding Coal Coke d RSE Row Factors Total United States RSE Column Factors: NF 0.5 1.3 1.4 0.8 1.2 1.2 NF TOTAL INPUTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16,515 778,335 70,111 26,107 5,962 25,949 54,143 5,828 2.7 Indirect Uses-Boiler Fuel . . . . . . . . . . . . . . . . . . . . . . . --

430

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Welding, Fabrication, & Metal Forming Welding, Fabrication, & Metal Forming PDF format (159 kb) The department consists of three trades: welding; fabrication and assembly; and precision metal forming. These interrelated groups use similar equipment and rely on each other's skills. One stop will get you the service of three reliable trades. The team manufactures and assembles prototype hardware and has the in-house capability of producing hardware with sizes ranging from thumbnail to rail-car. Expertise includes aircraft quality sheet metal construction, certified welding, and assembly. The staff has experience managing a variety of activities: design modification assistance; in-house fabrication; and project management and can work with your engineers to transform sketches and ideas into working prototypes.

431

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

3 3 Energy Information Administration/Manufacturing Consumption of Energy 1994 Glossary Anthracite: A hard, black, lustrous coal containing a high percentage of fixed carbon and a low percentage of volatile matter. Often referred to as hard coal. Barrel: A volumetric unit of measure equivalent to 42 U.S. gallons. Biomass: Organic nonfossil material of biological origin constituting a renewable energy source. Bituminous Coal: A dense, black coal, often with well-defined bands of bright and dull material, with a moisture content usually less than 20 percent. Often referred to as soft coal. It is the most common coal. Blast Furnace: A shaft furnace in which solid fuel (coke) is burned with an air blast to smelt ore in a continuous operation. Blast Furnace Gas: The waste combustible gas generated in a blast furnace when iron ore is being reduced with coke to

432

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

LTCC multi-chip module LTCC multi-chip module A high density LTCC multi-chip module Electronic Packaging PDF format (150 kb) The Electronic Packaging technologies in the Thin Film, Vacuum, & Packaging Department are a resource for all aspects of microelectronic packaging. From design and layout to fabrication of prototype samples, the staff offers partners the opportunity for concurrent engineering and development of a variety of electronic packaging concepts. This includes assistance in selecting the most appropriate technology for manufacturing, analysis of performance characteristics and development of new and unique processes. Capabilities: Network Fabrication Low Temperature Co-Fired Ceramic (LTCC) Thick Film Thin Film Packaging and Assembly Chip Level Packaging MEMs Packaging

433

Wind Turbine Manufacturing Process Monitoring  

SciTech Connect (OSTI)

To develop a practical inline inspection that could be used in combination with automated composite material placement equipment to economically manufacture high performance and reliable carbon composite wind turbine blade spar caps. The approach technical feasibility and cost benefit will be assessed to provide a solid basis for further development and implementation in the wind turbine industry. The program is focused on the following technology development: (1) Develop in-line monitoring methods, using optical metrology and ultrasound inspection, and perform a demonstration in the lab. This includes development of the approach and performing appropriate demonstration in the lab; (2) Develop methods to predict composite strength reduction due to defects; and (3) Develop process models to predict defects from leading indicators found in the uncured composites.

Waseem Faidi; Chris Nafis; Shatil Sinha; Chandra Yerramalli; Anthony Waas; Suresh Advani; John Gangloff; Pavel Simacek

2012-04-26T23:59:59.000Z

434

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

0. 0. Number of Establishments that Actually Switched Fuels from Natural Gas to Residual Fuel Oil, by Industry Group and Selected Industries, 1994 369 Energy Information Administration/Manufacturing Consumption of Energy 1994 SIC Residual Fuel Oil Total Code Industry Group and Industry (billion cu ft) Factors (counts) (counts) (percents) (counts) (percents) a Natural Gas Switchable to Establishments RSE Row Able to Switch Actually Switched RSE Column Factors: 1.3 0.1 1.4 1.7 1.6 1.8 20 Food and Kindred Products . . . . . . . . . . . . . . . . . . . . . . . . . 81 14,698 702 4.8 262 1.8 5.6 2011 Meat Packing Plants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 759 23 3.0 10 1.3 9.0 2033 Canned Fruits and Vegetables . . . . . . . . . . . . . . . . . . . . . 9 531 112 21.2 33 6.2 11.6 2037 Frozen Fruits and Vegetables . . . . . . . . . . . . . . . . . . . . . . 5 232 Q 5.3

435

Clean Energy Manufacturing Resources - Technology Feasibility | Department  

Broader source: Energy.gov (indexed) [DOE]

Feasibility Feasibility Clean Energy Manufacturing Resources - Technology Feasibility Clean Energy Manufacturing Resources - Technology Feasibility Find resources to help you evaluate the feasibility of your idea for a new clean energy technology or product. For determining feasibility, areas to consider include U.S. Department of Energy (DOE) priorities, licensing, R&D funding, and strategic project partnerships. For more resources, see the Clean Energy Manufacturing Federal Resource Guide. Learn About U.S. Department of Energy Priorities Advanced Manufacturing Office Plans - features information on analysis, plan implementations, and commercial outcomes. Bioenergy Technologies Office Plans - includes technology roadmaps, multiyear program plans, analysis, and more.

436

Advanced Manufacturing Jobs and Innovation Accelerator Challenge |  

Broader source: Energy.gov (indexed) [DOE]

Technical Assistance » Advanced Manufacturing Jobs and Innovation Technical Assistance » Advanced Manufacturing Jobs and Innovation Accelerator Challenge Advanced Manufacturing Jobs and Innovation Accelerator Challenge October 10, 2013 - 12:01pm Addthis The Advanced Manufacturing Jobs and Innovation Accelerator Challenge (Accelerator) is a multi-agency sponsored competition established to enhance existing regional networks of firms and institutions that accelerate technology-related innovation, business formation, and job creation. Funding provided to these regional networks (also called clusters) help academia, utilities, local governments, and private industry and investors expand partnerships, share strategic information more efficiently, and reduce costs by leveraging existing assets and resources (like physical facilities and equipment).

437

Solutia: Massachusetts Chemical Manufacturer Uses SECURE Methodology...  

Broader source: Energy.gov (indexed) [DOE]

SECURE Methodology to Identify Potential Reductions in Utility and Process Energy Consumption Solutia: Massachusetts Chemical Manufacturer Uses SECURE Methodology to Identify...

438

Moving towards green and sustainable manufacturing  

Science Journals Connector (OSTI)

The pressing needs of energy, water and other resource conservation worldwide is ... a major engineering challenge. In manufacturing, developing green technologies (from process and tooling to the ... manufacturi...

David Alan Dornfeld

2014-01-01T23:59:59.000Z

439

Oak Ridge Centers for Manufacturing Technology - Partnership...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in result from Jack Cook making contacts with some of the people who experienced the Oak Ridge Centers for Manufacturing Technology firsthand. Here is his introduction...

440

Oak Ridge National Laboratory Manufacturing Demonstration Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Oak Ridge National Laboratory Manufacturing Demonstration Facility Technology Collaborations | Proposal Guidelines Proposal Guidelines Proposals should be no more than 5 single...

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Oak Ridge Centers for Manufacturing Technology ? testimonials  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

testimonials The first testimonial for the successful Oak Ridge Centers for Manufacturing Technology came from Mitchell Burnett. Mitch was among the first hourly paid employees, an...

442

Fiber Reinforced Polymer Composite Manufacturing Workshop  

Office of Energy Efficiency and Renewable Energy (EERE)

A workshop on Fiber Reinforced Polymer (FRP) Composite Manufacturing (held January 13, 2014, in Arlington, VA) brought together stakeholders from industry and academia to discuss manufacturing of composites. The workshop explored emerging FRP composite market applications in clean energy and barriers to the development and widespread commercial use of these lightweight, high-strength and high-stiffness materials. Improving the manufacturing speed and quality-and reducing their manufacturing costs-could accelerate their use in automotive, wind, compressed gas storage and other clean energy and industrial applications.

443

Manufacturing Success Stories | Department of Energy  

Office of Environmental Management (EM)

Colorado State University Industrial Assessment Center Saves Manufacturers Money and Trains the Next Generation of Engineers Assessment center has helped Colorado companies save...

444

Federal Energy and Manufacturing Workforce Training Programs...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

manufacturing related workforce training programs. Funded by the National Science Foundation, the Department of Labor and the Department of Energy these programs provide...

445

Establishing Greener Products and Manufacturing Processes  

E-Print Network [OSTI]

Precision Manufacturing, LCA, Machining, SustainabilityNOMENCLATURE API = CMOS = GWP = LCA = LCI = Mfg = MRR = RoHSLife Cycle Assessment (LCA). The following sections will

Linke, Barbara; Dornfeld, David; Huang, Yu-Chu

2011-01-01T23:59:59.000Z

446

Industrial Scale Demonstration of Smart Manufacturing Achieving...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

TX National Center for Manufacturing Sciences Ann Arbor, MI Nimbis Services McLean, VA Praxair Tonawanda, NY Rockwell Automation Milwaukee, WI For additional information, please...

447

Agenda: Fiber Reinforced Polymer Composite Manufacturing Workshop  

Broader source: Energy.gov (indexed) [DOE]

Blue Team B (Washington II & III) - Manufacturing Process Technology Facilitators - Kelly Visconti and Steve Sikirica; Note taker - Theresa Miller Red Team (Madison Room) -...

448

Advanced Manufacturing Office (Formerly Industrial Technologies Program)  

Broader source: Energy.gov [DOE]

Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011.

449

PRESENTATION: BRIEFING ON CLEAN ENERGY MANUFACTURING  

Broader source: Energy.gov [DOE]

A briefing to the Secretary's Energy Advisory Board on the clean energy manufacturing delivered by David Danielson, Assistant Secretary for Energy Efficiency and Renewable Energy.

450

National Network for Manufacturing Innovation: A Preliminary...  

Energy Savers [EERE]

capabilities from all the partners to build the proving grounds where innovations flourish and to help advance American domestic manufacturing. nstcnnmiprelimdesignfinal.pdf...

451

Composite Tube Trailer Design/Manufacturing Needs  

Broader source: Energy.gov [DOE]

Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011.

452

Manufacturing Barriers to High Temperature PEM Commercialization  

Broader source: Energy.gov [DOE]

Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011.

453

Supplemental Comments of the Plumbing Manufacturers Instititute...  

Broader source: Energy.gov (indexed) [DOE]

Supplemental Comments of the Plumbing Manufacturers Instititute Regarding the Economic Impacts of the Proposed Definition of "Showerhead," Docket No. EERE-2010-BT-NOA-0016...

454

American Energy and Manufacturing Competitiveness Summit  

Broader source: Energy.gov [DOE]

The American Energy and Manufacturing Competitiveness Summit will bring together leaders and perspectives from industry, government, academia, national laboratories, labor, and policy organizations...

455

Fiber Reinforced Polymer Composite Manufacturing Workshop: Summary...  

Energy Savers [EERE]

for carbon fiber, including bio-based materials or natural gas; lower energy conversion of white fiber to carbon fiber; and composite manufacturing. Dr. Johnson then...

456

Manufacturing Ecosystems and Keystone Technologies (Text Version)  

Broader source: Energy.gov [DOE]

This is a text version of the Manufacturing Ecosystems and Keystone Technologies video, originally presented on March 12, 2012 at the MDF Workshop held in Chicago, Illinois.

457

Additive Manufacturing: Current Status and Future Prospects  

Science Journals Connector (OSTI)

The potential implications of additive manufacturing or 3D printing technology are being recognized across a number ... wider adoption of and greater business value from 3D printing.

Jyotirmoyee Bhattacharjya; Sonali Tripathi

2014-01-01T23:59:59.000Z

458

Solar Manufacturing Incentive Grant (SMIG) Program  

Broader source: Energy.gov [DOE]

Created in 1995 and administered jointly by the Virginia Department of Mines, Minerals and Energy, and the Virginia Economic Development Partnership, the Solar Manufacturing Incentive Grant (SMIG)...

459

Green Manufacturing Initiative Annual Report 2010  

E-Print Network [OSTI]

Green Manufacturing Initiative Annual Report 2010 Dr. John Patten Dr. David Meade May 3, 2011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Herman Miller Energy Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

de Doncker, Elise

460

Low Energy Ion Implantationin Semiconductor Manufacturing | U...  

Office of Science (SC) Website

Low Energy Ion Implantation in Semiconductor Manufacturing Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Applications of Nuclear Science...

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

2014 Manufacturing Energy and Carbon Footprints: Definitions...  

Broader source: Energy.gov (indexed) [DOE]

and Assumptions A number of key terms are used to interpret the manufacturing energy and carbon footprints. The terms associated with the energy footprint analysis are...

462

Advanced Materials and Manufacturing | Argonne National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and characterization of ceramic materials for energy-related applications Process Development and Scale-up Program Argonne's Materials Synthesis and Manufacturing Research and...

463

Manufacturing Licenses Available | Tech Transfer | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Manufacturing Manufacturing SHARE Manufacturing 200401490 Production of Materials with Superior Properties Utilizing High Magnetic Field (Related ID # 200501531, 200701867, 200802085, 200902312, 201002455, 201102675) 200701900 Robust Digital Valve for Prosthetic Finger, Microsurgery, Robotics (Related ID # 200701983, 200802088) 200701972 Manufacturing Biodiesel from Triglycerides (Related ID # 200702012, 200802186) 200701983 Meso-scale Fluidic Digital Valve 200802083 A Hydraulic Flow Control Device by Means of a Digital Poppet Valve 200802088 Miniature shape memory alloy fluid control valve 200902224 Glass Drawing for Wire Arrays 200902231 Nano/Micro Vacuum Triodes Using Glass Fiber Drawing Methods 200902291 Method of Machining Carbon and Graphite foams 200902309 Multi-Winding Homopolar Electric Machine Offers

464

NMG documentation, part 1: user`s guide  

SciTech Connect (OSTI)

This is the first of a three-part report documenting NMG, the Numerical Mathematics Guide. Part I is aimed at the user of the system. It contains an introduction, with an outline of the complete report, and Chapter 1, User`s Point of View. Part II is aimed at the programmer and contains Chapter 2, How It Works. Part III is aimed at the maintainer of NMG and contains Chapter 3, Maintenance, and Chapter 4, Validation. Each chapter has its own page numbering and table of contents.

Fritsch, F.N.; Dickinson, R.P. Jr.

1996-07-01T23:59:59.000Z

465

On the Performance of Energy-Division Multiple Access with Regular Constellations  

Science Journals Connector (OSTI)

In this paper we describe a multiple-access protocol in which different users are assumed to share the same bandwidth and the same pulse. Users employ the same modulation (binary-phase shift keying, quadrature-phase shift keying, and rectangular-phase ... Keywords: Amplitude modulation, Bit error rate, Multiple access, Normalized throughput, Successive decoding

Pierluigi Salvo Rossi; Gianmarco Romano; Francesco Palmieri

2012-05-01T23:59:59.000Z

466

Active solar heating and cooling information user study  

SciTech Connect (OSTI)

The results of a series of telephone interviews with groups of users of information on active solar heating and cooling (SHAC). An earlier study identified the information user groups in the solar community and the priority (to accelerate solar energy commercialization) of getting information to each group. In the current study only high-priority groups were examined. Results from 19 SHAC groups respondents are analyzed in this report: DOE-Funded Researchers, Non-DOE-Funded Researchers, Representatives of Manufacturers (4 groups), Distributors, Installers, Architects, Builders, Planners, Engineers (2 groups), Representatives of Utilities, Educators, Cooperative Extension Service County Agents, Building Owners/Managers, and Homeowners (2 groups). The data will be used as input to the determination of information products and services the Solar Energy Research Institute, the Solar Energy Information Data Bank Network, and the entire information outreach community should be preparing and disseminating.

Belew, W.W.; Wood, B.L.; Marle, T.L.; Reinhardt, C.L.

1981-01-01T23:59:59.000Z

467

U-014: Oracle Java Runtime Environment (JRE) Multiple Flaws Let Remote  

Broader source: Energy.gov (indexed) [DOE]

14: Oracle Java Runtime Environment (JRE) Multiple Flaws Let 14: Oracle Java Runtime Environment (JRE) Multiple Flaws Let Remote Users Execute Arbitrary Code and Deny Service U-014: Oracle Java Runtime Environment (JRE) Multiple Flaws Let Remote Users Execute Arbitrary Code and Deny Service October 19, 2011 - 6:00pm Addthis PROBLEM: Oracle Java Runtime Environment (JRE) Multiple Flaws Let Remote Users Execute Arbitrary Code and Deny Service. PLATFORM: Oracle JDK and JRE 7; JDK and JRE 6 Update 27 and prior; JDK and JRE 5.0 Update 31 and prior; SDK and JRE 1.4.2_33 and prior ABSTRACT: A remote user can create a Java applet or Java Web Start application that, when loaded by the target user, will access or modify data or execute arbitrary code on the target user's system. reference LINKS: Oracle Critical Patch Updates and Security Alerts

468

U-014: Oracle Java Runtime Environment (JRE) Multiple Flaws Let Remote  

Broader source: Energy.gov (indexed) [DOE]

4: Oracle Java Runtime Environment (JRE) Multiple Flaws Let 4: Oracle Java Runtime Environment (JRE) Multiple Flaws Let Remote Users Execute Arbitrary Code and Deny Service U-014: Oracle Java Runtime Environment (JRE) Multiple Flaws Let Remote Users Execute Arbitrary Code and Deny Service October 19, 2011 - 6:00pm Addthis PROBLEM: Oracle Java Runtime Environment (JRE) Multiple Flaws Let Remote Users Execute Arbitrary Code and Deny Service. PLATFORM: Oracle JDK and JRE 7; JDK and JRE 6 Update 27 and prior; JDK and JRE 5.0 Update 31 and prior; SDK and JRE 1.4.2_33 and prior ABSTRACT: A remote user can create a Java applet or Java Web Start application that, when loaded by the target user, will access or modify data or execute arbitrary code on the target user's system. reference LINKS: Oracle Critical Patch Updates and Security Alerts

469

Manufacturer-To-Retailer versus Manufacturer-To-Consumer Rebates in a Supply Chain  

Science Journals Connector (OSTI)

Starting with a newsvendor model (single-product, single-period, stochastic demand), we build a single-retailer, single-manufacturer supply chain with endogenous manufacturer rebates and retail pricing. The deman...

Goker Aydin; Evan L. Porteus

2009-01-01T23:59:59.000Z

470

Simultaneous Tolerance Synthesis for Manufacturing and Quality B. Ye, Department of Industrial and Manufacturing Systems Engineering  

E-Print Network [OSTI]

Simultaneous Tolerance Synthesis for Manufacturing and Quality B. Ye, Department of Industrial and Manufacturing Systems Engineering University of Windsor F.A. Salustri, Department of Mechanical, Aerospace, and Industrial Engineering, Ryerson University To appear, Research in Engineering Design, Springer

Salustri, Filippo A.

471

Modeling of additive manufacturing process relevant feature in layer based manufacturing process planning  

Science Journals Connector (OSTI)

Compared with general machining processes, additive manufacturing (AM) process has stabler planning route ... approach is applied to the process planning of additive manufacturing in this paper. The concept of ....

Xi-juan Liu ???

2012-04-01T23:59:59.000Z

472

A Vehicle Manufacturers Perspective on Higher-Octane Fuels  

Broader source: Energy.gov [DOE]

Breakout Session 1CFostering Technology Adoption I: Building the Market for Renewables with High Octane Fuels A Vehicle Manufacturers Perspective on Higher-Octane Fuels Tom Leone, Technical Expert, Powertrain Evaluation and Analysis, Ford Motor Company

473

Fermilab Users' Outreach Workshop, 2009  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Fermilab Users' Outreach Workshop Fermilab Users' Outreach Workshop June 4 & 5, 2009 The Fermilab Users’ Organization will host an Outreach Workshop on June 4th and 5th, 2009, in association with the annual Users Meeting. The workshop will be an opportunity to exchange ideas on effective and practical ways to communicate the excitement of physics and what we do as scientists to students, the general public and government officials. We hope the sessions will encourage members of the Users' community to become engaged in outreach activities. Activities Tesla Coils June 3rd 9:30PM, Parking Lot Lab 3: While enjoying the traditional Users Meeting Festa, see the Tesla Coil show. Directions June 4th During coffee breaks and lunch on the second day of the Users Meeting proper, browse posters and demonstrations showcasing sucessful educational outreach programs. Also featured, posters from students enrolled in the Saturday Morning Physics program detailing what the outreach program meant to them. Instructions for Poster Presenters, follow this link.

474

T-721:Mac OS X Directory Services Lets Local Users View User Password  

Broader source: Energy.gov (indexed) [DOE]

21:Mac OS X Directory Services Lets Local Users View User 21:Mac OS X Directory Services Lets Local Users View User Password Hashes T-721:Mac OS X Directory Services Lets Local Users View User Password Hashes September 20, 2011 - 8:45am Addthis PROBLEM: Mac OS X Directory Services Lets Local Users View User Password Hashes. PLATFORM: Mac OS X Lion (10.7) ABSTRACT: A local user can view user password hashes. reference LINKS: SecurityTracker Alert ID: 1026067 Apple Support Downloads Apple Security Updates Apple OS X Lion v10.7.1 Update IMPACT ASSESSMENT: Medium Discussion: A vulnerability was reported in Mac OS X. A local user can view user password hashes. A local user can invoke the following Directory Services command line command to view the password hash for the target user: dscl localhost -read /Search/Users/[target user] A local user can change their

475

Text analysis devices, articles of manufacture, and text analysis methods  

DOE Patents [OSTI]

Text analysis devices, articles of manufacture, and text analysis methods are described according to some aspects. In one aspect, a text analysis device includes processing circuitry configured to analyze initial text to generate a measurement basis usable in analysis of subsequent text, wherein the measurement basis comprises a plurality of measurement features from the initial text, a plurality of dimension anchors from the initial text and a plurality of associations of the measurement features with the dimension anchors, and wherein the processing circuitry is configured to access a viewpoint indicative of a perspective of interest of a user with respect to the analysis of the subsequent text, and wherein the processing circuitry is configured to use the viewpoint to generate the measurement basis.

Turner, Alan E; Hetzler, Elizabeth G; Nakamura, Grant C

2013-05-28T23:59:59.000Z

476

Project-Role Pair user_tokens  

E-Print Network [OSTI]

OSAC Users (U) Domains (D) Roles (R) User Assignment (UA) Permission Assignment (PA) Project Ownership (PO) Project-Role Pair (PRP) Projects (P) Tokens (T) User Ownership (UO) Services (S) user_tokens token_project Groups (G) Group Ownership (GO) User Group (UG) Group Assignment (GA) token_roles PERMS

Sandhu, Ravi

477

Watfactory Virtual Manufacturing Process Varying Inputs  

E-Print Network [OSTI]

with the virtual process: · Allows quick exploration (i.e. during a short course) of process improvement ideasWatfactory Virtual Manufacturing Process Machine 1 Machine 2 Machine 3 Stream 1 Machine B Stream 2 Inputs Can be Set by Stream z19, ..., z24 The Watfactory virtual process simulates a manufacturing

Zhu, Mu

478

Biologically inspired mutual synchronization of manufacturing machines  

E-Print Network [OSTI]

Biologically inspired mutual synchronization of manufacturing machines Erjen Lefeber,a,1 , Herman machine is developed. This control system is based on a synchronization mechanism of enzymes replacing of a single turnover cycle. In manufacturing, batch machines serve several jobs simultaneously, e.g., heat

Armbruster, Dieter

479

A Global Assessment of Manufacturing: Economic  

E-Print Network [OSTI]

A Global Assessment of Manufacturing: Economic Development, Energy Use, Carbon Emissions Keywords production, materials, closed loop, China, emerging economies Abstract We present in two parts an assessment of global manufacturing. In the first part, we review economic development, pollution, and carbon

Gutowski, Timothy

480

Mechanical and Manufacturing Engineering Petroleum Engineering Minor  

E-Print Network [OSTI]

Mechanical and Manufacturing Engineering Petroleum Engineering Minor The Department of Mechanical and Manufacturing Engineering offers a minor in petroleum engineering within the mechanical engineering major program. This minor builds on the fundamentals provided by a basis in mechanical engineering and adds

Calgary, University of

Note: This page contains sample records for the topic "multiple users manufacturers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Evaluating Energy Efficiency Improvements in Manufacturing Processes  

E-Print Network [OSTI]

and increasing awareness of "green" customers have brought energy efficient manufacturing on top of the agendaEvaluating Energy Efficiency Improvements in Manufacturing Processes Katharina Bunse1 , Julia Sachs kbunse@ethz.ch, sachsj@student.ethz.ch, mvodicka@ethz.ch Abstract. Global warming, rising energy prices

Boyer, Edmond

482

Simulation Model Driven Engineering for Manufacturing Cell  

E-Print Network [OSTI]

Simulation Model Driven Engineering for Manufacturing Cell Hironori Hibino1 , Toshihiro Inukai2 Abstract. In our research, the simulation model driven engineering for manufacturing cell (SMDE on the simulation model and to extend the range of control applications and simulation applications using the PC

Paris-Sud XI, Université de

483

Low Temperature PEM Fuel Cell Manufacturing Needs  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

PEM Fuel Cell PEM Fuel Cell Manufacturing Needs Presented by Duarte Sousa, PE Manufacturing Fuel Cell Manhattan Project  Cost drivers were identified for the following: * MEA * Plates * Balance of Plant (BOP) * Fuel Processing Manufacturing Fuel Cell Project - Phase 1 Note that this presentation will be MEA centric as this is the working group I represent...  MEA Cost Drivers Identified: Identifying MEA Cost Drivers * The MEA was readily identified as the major cost driver in a 10 kW stationary stack. * The precious metal catalyst electrode is the major cost driver for the MEA. Thus, focus cost reduction efforts on MEA manufacturing methods. Identify gaps in MEA manufacturing technology: How much better can we do? Note: Cost reductions realized from both material price reduction

484

Manufacturing News and Blog | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing News and Blog Manufacturing News and Blog Manufacturing News and Blog Blog Next-Generation Power Electronics: Reducing Energy Waste and Powering the Future January 15, 2014 3:53 PM From unleashing more powerful and energy-efficient laptops, cell phones and motors, to shrinking utility-scale inverters from 8,000 pound substations to the size of a suitcase, wide bandgap semiconductors could be one of the keys to our clean energy future. Read The Full Story Manufacturing Spotlight: Boosting American Competitiveness January 6, 2014 1:06 PM Find out how the Energy Department is helping bring new clean energy technologies to the marketplace and make manufacturing processes more energy efficient. Read The Full Story Secretary Moniz Joins President Obama in Visit to Cleveland High-Strength Steel Factory

485

Summit Manufacturing: Noncompliance Determination (2010-SE-0303) |  

Broader source: Energy.gov (indexed) [DOE]

Summit Manufacturing: Noncompliance Determination (2010-SE-0303) Summit Manufacturing: Noncompliance Determination (2010-SE-0303) Summit Manufacturing: Noncompliance Determination (2010-SE-0303) May 28, 2010 DOE issued a Notice of Noncompliance Determination to Summit Manufacturing, Inc. finding that 4SHP13LE136P + 15001+CA042A964+TDR basic model, a split-system air conditioning heat pump with a heat pump coil, does not comport with the energy conservation standards. DOE determined the product was noncompliant based on the company's own testing. Summit must immediately notify each person (or company) to whom Summit distributed the noncompliant products that the product does not meet Federal standards. In addition, Summit must provide to DOE documents and records showing the number of units Summit distributed and to whom. The manufacturer and/or

486

Revitalizing American Manufacturing | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Revitalizing American Manufacturing Revitalizing American Manufacturing Revitalizing American Manufacturing September 13, 2010 - 5:30pm Addthis A123 Systems' President David Vieau speaks with Energy Secretary Steven Chu and Michigan Governor Jennifer Granholm at the opening of their Livonia, MI plant. The plant will develop and manufacture advanced batteries systems for electric vehicles. | Department of Energy Photo | A123 Systems' President David Vieau speaks with Energy Secretary Steven Chu and Michigan Governor Jennifer Granholm at the opening of their Livonia, MI plant. The plant will develop and manufacture advanced batteries systems for electric vehicles. | Department of Energy Photo | Secretary Chu Secretary Chu Former Secretary of Energy "The Department of Energy has long been charged with accelerating energy

487

FACTSHEET: Next Generation Power Electronics Manufacturing Innovation  

Broader source: Energy.gov (indexed) [DOE]

FACTSHEET: Next Generation Power Electronics Manufacturing FACTSHEET: Next Generation Power Electronics Manufacturing Innovation Institute FACTSHEET: Next Generation Power Electronics Manufacturing Innovation Institute January 15, 2014 - 9:20am Addthis The Obama Administration today announces the selection of North Carolina State University to lead a public-private manufacturing innovation institute for next generation power electronics. Supported by a $70 million Energy Department investment over five years as well as a matching $70 million in non-federal cost-share, the institute will bring together over 25 companies, universities and state and federal organizations to invent and manufacture wide bandgap (WBG) semiconductor-based power electronics that are cost-competitive and 10 times more powerful than current

488

Logistics implications of electric car manufacturing  

Science Journals Connector (OSTI)

The increasingly important role of electric cars manufacturing needs to develop new logistics concepts in automotive industry. This article analyses critical issues in logistics operations of electric cars based on the in-house perspective of the car manufacturer. The purpose of this paper is two-fold. Firstly, to verify existing research about the impact of electric car manufacturing on logistics operations. Secondly, to investigate concrete logistics implications based on different electric car operations models. Therefore, we use manufacturing phenotypes, which can be applied to separate and classify configuration and coordination principles and helps to reach a better understanding of relationships with their logistics implications. The presented model is based on real case study data of global auto industry and supports the academic study of cross-site comparisons. A holistic and consistent understanding of different operations types in electric car manufacturing will be necessary, which will help in evaluating the actual and future supply chain forms in the car industry.

Florian Klug

2014-01-01T23:59:59.000Z

489

Manufacturing Innovation Multi-Topic Workshop  

Broader source: Energy.gov [DOE]

DOEs Advanced Manufacturing Office (AMO) and the Office of Secretary of Defense Manufacturing Technology Program (OSD ManTech) held a joint workshop October 8 and 9, 2014 in Fort Worth, TX. This workshop identified mid-Technology Readiness Level (TRL) research and development (R&D) needs, market and supply chain challenges, and shared facility needs for advanced manufacturing. The workshop complemented a recently released AMO Request for Information (RFI) and a recently amended OSD ManTech RFI. AMO and OSD ManTech sought to know more about the challenges associated with advanced manufacturing technology that potentially could be overcome by pre-competitive collaboration as part of a Manufacturing Innovation Institute.

490

EI Summary of All Manufacturing SIC  

U.S. Energy Information Administration (EIA) Indexed Site

All (20-39) Food (20) Textiles (22) Apparel (23) Lumber (24) Furniture (25) Paper (26) Printing (27) Chemicals (28) Refineries (29) Rubber (30) Stone, Clay & Glass(32) Primary Metals (33) Fabricated Metals (34) Machinery (35) Electronic Equipment (36) Instruments (38) Miscellaneous Manufacturing (39) All (20-39) Food (20) Textiles (22) Apparel (23) Lumber (24) Furniture (25) Paper (26) Printing (27) Chemicals (28) Refineries (29) Rubber (30) Stone, Clay & Glass(32) Primary Metals (33) Fabricated Metals (34) Machinery (35) Electronic Equipment (36) Instruments (38) Miscellaneous Manufacturing (39) The manufacturing sector includes establishments engaged in the mechanical or chemical transformation of materials or substances into new products. These operations are generally conducted in facilities described as plants, factories, or mills, while characteristically using power-driven machines and material-handling equipment. Manufacturing also includes such activities as the assembly of components of manufactured products and the blending of materials, such as lubricating oil, plastics, resins, or liquors.

491

Energy-Related Carbon Emissions in Manufacturing  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Energy-Related Carbon Emissions Energy Energy-Related Carbon Emissions Detailed Energy-Related Carbon Emissions All Industry Groups 1994 emissions Selected Industries Petroleum refining Chemicals Iron & Steel Paper Food Stone, clay and glass Methodological Details Estimation methods Glossary Return to: Energy and GHG Analysis Efficiency Page Energy Use in Manufacturing Energy-Related Carbon Emissions in Manufacturing Manufacturing, which accounts for about 80 percent of industrial energy consumption, also accounts for about 80 percent of industrial energy-related carbon emissions. (Agriculture, mining, forestry, and fisheries account for the remaining 20 percent.) In 1994, three industries, petroleum, chemicals, and primary metals, emitted almost 60 percent of the energy-related carbon in manufacturing. The next three largest emitters (paper, food, and the stone, glass, and clay products industry) produced an additional 22 percent of the energy-related manufacturing emissions (Figure 1).

492

User Facilities for Industry 101  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Satellite!Workshop!10!-!User!Facilities!for!Industry!101! Satellite!Workshop!10!-!User!Facilities!for!Industry!101! Organizers:+Andreas+Roelofs+(CNM),+Jyotsana+Lal+(APS),+Katie+Carrado+Gregar+(CNM),+and+Susan+Strasser+ (APS)! ! In! order! to! increase! awareness! of! the! industrial! community! to! Argonne! National! Laboratory! user! facilities,!the!Advanced!Photon!Source!(APS),!the!Center!for!Nanoscale!Materials!(CNM)!and!the!Electron! Microscopy!Center!(EMC)!welcomed!industrial!scientists,!engineers!and!related!professionals!to!a!oneC day! workshop! to! learn! more! about! Argonne's! National! Laboratory! and! the! capabilities/techniques! available! for! their! use.! The! workshop! showcased! several! successful! industrial! user! experiments,! and! explained! the! different! ways! in! which! industrial! scientists! can! work! at! Argonne! or! with! Argonne!

493

APS USER TRAINING HISTORY Background  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

USER TRAINING HISTORY USER TRAINING HISTORY Background The User Program Division Director has delegated to the CATs the authority to authorize the conduct of experiments because the CATs have accepted responsibility for: * identifying and evaluating the hazards posed by the experiment, * specifying controls appropriate to the hazards, and * verifying that controls are in place. One form of hazard control frequently made mandatory by law and laboratory policy is worker knowledge. The accepted means of verifying that a worker has the required knowledge is ensuring that the worker has completed appropriate training. With CAT input, the APS has developed the APS User Training History. This web-based tool enables designated CAT personnel to examine data characterizing ES&H training courses

494

CCD Astronomy Software User's Guide  

E-Print Network [OSTI]

CCDSoft CCD Astronomy Software User's Guide Version 5 Revision 1.11 Copyright © 1992­2006 SantaSky Astronomy Software, and AutomaDome are trademarks of Software Bisque. WindowsTM is a trademark of Microsoft

495

Lisa Gerhardt NERSC User Services"  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Gerhardt " NERSC User Services" September 10, 2013" Getting Started at NERSC: Running Jobs Jobs at NERSC * Most j obs a re p arallel, u sing 1 0s t o 1 00,000+ c ores * Produc8on r...

496

Kirsten Fagnan NERSC User Services"  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Kirsten Fagnan " NERSC User Services" February 15, 2013" Running Parallel Jobs Outline * Parallel P rogramming M odels * NERSC S ystems a nd S ample S cripts * Queues a nd P...

497

Midwest Hydro Users Group Meeting  

Broader source: Energy.gov [DOE]

The Midwest Hydro Users Group will be holding their annual Fall meeting on November 12th and 13th in Wausau, Wisconsin. An Owners-only meeting on the afternoon of the 12th followed by a full...

498

Manufacturing and testing VLPC hybrids  

SciTech Connect (OSTI)

To insure that the manufacture of VLPC devices is a reliable, cost-effective technology, hybrid assembly procedures and testing methods suitable for large scale production have been developed. This technology has been developed under a contract from Fermilab as part of the D-Zero upgrade program. Each assembled hybrid consists of a VLPC chip mounted on an AlN substrate. The VLPC chip is provided with bonding pads (one connected to each pixel) which are wire bonded to gold traces on the substrate. The VLPC/AlN hybrids are mated in a vacuum sealer using solder preforms and a specially designed carbon boat. After mating, the VLPC pads are bonded to the substrate with an automatic wire bonder. Using this equipment we have achieved a thickness tolerance of {+-}0.0007 inches and a production rate of 100 parts per hour. After assembly the VLPCs are tested for optical response at an operating temperature of 7K. The parts are tested in a custom designed continuous-flow dewar with a capacity 15 hybrids, and one Lake Shore DT470-SD-11 calibrated temperature sensor mounted to an AlN substrate. Our facility includes five of these dewars with an ultimate test capacity of 75 parts per day. During the course of the Dzero program we have assembled more than 4,000 VLPC hybrids and have tested more than 2,500 with a high yield.

Adkins, L. R.; Ingram, C. M.; Anderson, E. J. [Guidance, Navigation and Sensors, Boeing (United States)

1998-11-09T23:59:59.000Z

499

User Experience | Security | Advertising Picture CAPTCHA  

E-Print Network [OSTI]

User Experience | Security | Advertising Picture CAPTCHA #12;Context: CAPTCHAs · A test are solved/day · User Attention · Complete user attention while solving the CAPTCHA · Advertisers love

Militzer, Burkhard

500

User:Woodjr/Sandbox | Open Energy Information  

Open Energy Info (EERE)

icon Twitter icon User:WoodjrSandbox < User:Woodjr Jump to: navigation, search Test link: Dataset 40 Retrieved from "http:en.openei.orgwindex.php?titleUser:Woodjr...