Powered by Deep Web Technologies
Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Expansion of the residential conservation service program to multi-family and small commercial buildings  

SciTech Connect (OSTI)

Alternative regulatory provisions are considered which might permit achievement of the building energy conservation regulatory goals at a lower cost. Major issues, regulatory and legislative options, and cost-benefit analyses are discussed for multi-family and commercial buildings. The following are presented: related government programs, urban and community impact analysis, institutional impacts, energy cost, Residential Conservation Service coverage, methods of analysis, and regional studies. (MHR)

None

1980-11-01T23:59:59.000Z

2

Development of a housing performance evaluation model for multi-family residential buildings in Korea  

Science Journals Connector (OSTI)

This paper presents the development and application of a housing performance evaluation model for multi-family residential buildings in Korea. This model is intended to encourage initiatives toward achieving better housing performance and to support a homebuyer's decision-making on housing comparison and selection. Forty-one objective and feasible housing performance indicators, which were selected from the review of existing evaluation models and interviews with experts, are classified into a series of categories. The weights of each category and indicator are calculated by using the analytic hierarchy process (AHP) analysis, and a weight is converted into credit. Next, the performance grades are divided into four levels, and evaluation criteria are suggested based on statutory performance value or the one frequently met in practice. Finally, the evaluation program and the application procedure are established through the field case study. This model can be used for objective and practical evaluation and comparison of residential housing alternatives.

Sun-Sook Kim; In-Ho Yang; Myoung-Souk Yeo; Kwang-Woo Kim

2005-01-01T23:59:59.000Z

3

EA-2001: Energy Efficiency Design Standards: New Federal Commercial and Multi-Family High-Rise Residential Buildings and New Federal Low-Rise Residential Buildings  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy (DOE) is publishing this final rule to implement provisions in the Energy Conservation and Production Act (ECPA) that require DOE to update the baseline Federal energy efficiency performance standards for the construction of new Federal commercial and multi-family high-rise residential buildings. This rule updates the baseline Federal commercial standard to the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) Standard 90.1-2013.

4

Energy Performance Comparison of Heating and Air Conditioning Systems for Multi-Family Residential Buildings  

SciTech Connect (OSTI)

The type of heating, ventilation and air conditioning (HVAC) system has a large impact on the heating and cooling energy consumption in multifamily residential buildings. This paper compares the energy performance of three HVAC systems: a direct expansion (DX) split system, a split air source heat pump (ASHP) system, and a closed-loop water source heat pump (WSHP) system with a boiler and an evaporative fluid cooler as the central heating and cooling source. All three systems use gas furnace for heating or heating backup. The comparison is made in a number of scenarios including different climate conditions, system operation schemes and applicable building codes. It is found that with the minimum code-compliant equipment efficiency, ASHP performs the best among all scenarios except in extremely code climates. WSHP tends to perform better than the split DX system in cold climates but worse in hot climates.

Wang, Weimin; Zhang, Jian; Jiang, Wei; Liu, Bing

2011-07-31T23:59:59.000Z

5

Construction cost impact analysis of the U.S. Department of Energy mandatory performance standards for new federal commercial and multi-family, high-rise residential buildings  

SciTech Connect (OSTI)

In accordance with federal legislation, the U.S. Department of Energy (DOE) has conducted a project to demonstrate use of its Energy Conservation Voluntary Performance Standards for Commercial and Multi-Family High-Rise Residential Buildings; Mandatory for New Federal Buildings; Interim Rule (referred to in this report as DOE-1993). A key requisite of the legislation requires DOE to develop commercial building energy standards that are cost effective. During the demonstration project, DOE specifically addressed this issue by assessing the impacts of the standards on (1) construction costs, (2) builders (and especially small builders) of multi-family, high-rise buildings, and (3) the ability of low-to moderate-income persons to purchase or rent units in such buildings. This document reports on this project.

Di Massa, F.V.; Hadley, D.L.; Halverson, M.A.

1993-12-01T23:59:59.000Z

6

Forecasting energy consumption of multi-family residential buildings using support vector regression: Investigating the impact of temporal and spatial monitoring granularity on performance accuracy  

Science Journals Connector (OSTI)

Abstract Buildings are the dominant source of energy consumption and environmental emissions in urban areas. Therefore, the ability to forecast and characterize building energy consumption is vital to implementing urban energy management and efficiency initiatives required to curb emissions. Advances in smart metering technology have enabled researchers to develop “sensor based” approaches to forecast building energy consumption that necessitate less input data than traditional methods. Sensor-based forecasting utilizes machine learning techniques to infer the complex relationships between consumption and influencing variables (e.g., weather, time of day, previous consumption). While sensor-based forecasting has been studied extensively for commercial buildings, there is a paucity of research applying this data-driven approach to the multi-family residential sector. In this paper, we build a sensor-based forecasting model using Support Vector Regression (SVR), a commonly used machine learning technique, and apply it to an empirical data-set from a multi-family residential building in New York City. We expand our study to examine the impact of temporal (i.e., daily, hourly, 10 min intervals) and spatial (i.e., whole building, by floor, by unit) granularity have on the predictive power of our single-step model. Results indicate that sensor based forecasting models can be extended to multi-family residential buildings and that the optimal monitoring granularity occurs at the by floor level in hourly intervals. In addition to implications for the development of residential energy forecasting models, our results have practical significance for the deployment and installation of advanced smart metering devices. Ultimately, accurate and cost effective wide-scale energy prediction is a vital step towards next-generation energy efficiency initiatives, which will require not only consideration of the methods, but the scales for which data can be distilled into meaningful information.

Rishee K. Jain; Kevin M. Smith; Patricia J. Culligan; John E. Taylor

2014-01-01T23:59:59.000Z

7

EA-1871: Environmental Assessment for Final Rule, 10 CFR 433, “EE Standards for New Federal Commercial and High-Rise Multi-Family Residential Buildings” and 10 CFR 435, “EE Standards for New Federal Residential Low-Rise Residential Buildings"  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy (DOE) has prepared this Environmental Assessment (EA) for DOE‘s Final Rule, 10 CFR 433, ?Energy Efficiency Standards for New Federal Commercial and High-Rise Multi-Family Residential Buildings? and 10 CFR 435, ?Energy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings? Baseline Standards Update. The final rule updates the baseline standards in 10 CFR 433 and 10 CFR 435 to the latest private sector standards based on the cost-effectiveness of the latest private sector standards and DOE‘s determination that energy efficiency has been improved in these codes as required by 42 U.S.C 6831 et seq. DOE is issuing its final determinations on American National Standards Institute (ANSI)/American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE)/Illuminating Engineering Society of North America (IESNA) Standard 90.1-2007 (ASHRAE 2007) and the International Code Council‘s 2009 International Energy Conservation Code (IECC) in the same edition of the Federal Register as this final rule.

8

Environmental Assessment for Direct Final Rule, 10 CFR 434, Energy Standards for New Federal Commercial and High-Rise Multi-FamilyResidential BuildingsŽ and 10 CFR 435, Energy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings"  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Proposed Rule, 10 CFR 433, Proposed Rule, 10 CFR 433, "Sustainable Design and Energy Efficiency Standards for New Federal Commercial and High-Rise Multi-Family Residential Buildings" and 10 CFR 435, "Sustainable Design and Energy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings" (DOE/EA-1463) 2 SUMMARY The U.S. Department of Energy (DOE) has prepared this Environmental Assessment (EA) for DOE's Proposed Rule, 10 CFR 433, "Sustainable Design and Energy Efficiency Standards for the Design and Construction of New Federal Commercial and High-Rise Multi-Family Residential Buildings" and 10 CFR 435, "Sustainable Design and Energy Efficiency Standards for New Federal Residential Low- Rise Residential Buildings". Section 305(a) of the Energy Conservation and Production

9

Environmental Assessment for Direct Final Rule, 10 CFR 434, Energy Standards for New Federal Commercial and High-Rise Multi-FamilyResidential BuildingsŽ and 10 CFR 435, Energy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings"  

Broader source: Energy.gov (indexed) [DOE]

Proposed Rule, 10 CFR 433, Proposed Rule, 10 CFR 433, "Sustainable Design and Energy Efficiency Standards for New Federal Commercial and High-Rise Multi-Family Residential Buildings" and 10 CFR 435, "Sustainable Design and Energy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings" (DOE/EA-1463) 2 SUMMARY The U.S. Department of Energy (DOE) has prepared this Environmental Assessment (EA) for DOE's Proposed Rule, 10 CFR 433, "Sustainable Design and Energy Efficiency Standards for the Design and Construction of New Federal Commercial and High-Rise Multi-Family Residential Buildings" and 10 CFR 435, "Sustainable Design and Energy Efficiency Standards for New Federal Residential Low- Rise Residential Buildings". Section 305(a) of the Energy Conservation and Production

10

Draft Environmental Assessment for Direct Final Rule, 10 CFR 434, "Energy Standards for New Federal Commercial and High-Rise High-Rise Multi-FamilyResidential Buildings" and 10 CFR 435, "Energy Efficiency Standards for New Federal Residential Low-Rise Re  

Broader source: Energy.gov (indexed) [DOE]

"Energy "Energy Efficiency Standards for New Federal Commercial and High-Rise Multi-Family Residential Buildings" and 10 CFR 435, "Energy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings" Baseline Standards Update (DOE/EA-1871) March 16, 2011 2 Environmental Assessment for Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and High-Rise Multi-Family Residential Buildings" and 10 CFR 435, "Energy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings" Baseline Standards Update

11

SoCalGas - Multi-Family Residential Rebate Program | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Multi-Family Residential Rebate Program Multi-Family Residential Rebate Program SoCalGas - Multi-Family Residential Rebate Program < Back Eligibility Multi-Family Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Appliances & Electronics Construction Water Heating Program Info State California Program Type Utility Rebate Program Rebate Amount Dishwashers: $30 Insulation: 25% Natural Gas Storage Water Heaters: $30 Tankless Water Heaters: $300 Central Furnaces: $200 Central System Water Heaters: $500 Central System Boilers: $1,500 Central Demand Hot Water Controllers: $700 or $1400 Provider Southern California Gas Company Southern California Gas Company provides incentives to encourage the owners and managers of multi-family residential buildings to increase their energy

12

Environmental Assessment for Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings" (DOE/EA-1918)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Environmental Assessment for Final Rule, 10 CFR 433, "Energy Environmental Assessment for Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings" (DOE/EA-1918) June 28, 2013 1 Environmental Assessment for Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings" (DOE/EA-1918) SUMMARY The U.S. Department of Energy (DOE) has prepared this environmental assessment (EA) for DOE's Final Rule, 10 CFR Part 433, "Energy Efficiency Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings". The Final Rule updates the baseline standard in 10 CFR 433 to the latest private sector standard based on cost-effectiveness and DOE's determination that energy efficiency has

13

Environmental Assessment for Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings" (DOE/EA-1918)  

Broader source: Energy.gov (indexed) [DOE]

Environmental Assessment for Final Rule, 10 CFR 433, "Energy Environmental Assessment for Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings" (DOE/EA-1918) June 28, 2013 1 Environmental Assessment for Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings" (DOE/EA-1918) SUMMARY The U.S. Department of Energy (DOE) has prepared this environmental assessment (EA) for DOE's Final Rule, 10 CFR Part 433, "Energy Efficiency Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings". The Final Rule updates the baseline standard in 10 CFR 433 to the latest private sector standard based on cost-effectiveness and DOE's determination that energy efficiency has

14

Seattle City Light - Multi-Family Residential Energy Efficiency Rebate  

Broader source: Energy.gov (indexed) [DOE]

Seattle City Light - Multi-Family Residential Energy Efficiency Seattle City Light - Multi-Family Residential Energy Efficiency Rebate Program Seattle City Light - Multi-Family Residential Energy Efficiency Rebate Program < Back Eligibility Multi-Family Residential Savings Category Home Weatherization Commercial Weatherization Appliances & Electronics Commercial Lighting Lighting Windows, Doors, & Skylights Program Info State District of Columbia Program Type Utility Rebate Program Rebate Amount Lighting: 85% discount on installation costs Insulation: 50% discount on installation costs Window Replacement: $3 - $5/sq. ft. Provider Seattle City Light Seattle City Light provides incentives for its multi-family housing customers to increase their energy efficiency. Rebates are offered for common area lighting and weatherization measures including the installation

15

SCE - Multi-Family Residential Energy Efficiency Programs | Department of  

Broader source: Energy.gov (indexed) [DOE]

Multi-Family Residential Energy Efficiency Programs Multi-Family Residential Energy Efficiency Programs SCE - Multi-Family Residential Energy Efficiency Programs < Back Eligibility Multi-Family Residential Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Appliances & Electronics Heat Pumps Commercial Lighting Lighting Manufacturing Water Heating Home Weatherization Windows, Doors, & Skylights Other Program Info Funding Source System Benefits Charge Start Date 1/1/2012 Expiration Date 12/31/2012 State California Program Type Utility Rebate Program Rebate Amount LED Pool/Spa Lighting: $75 - $100/unit Pool Pumps: $100 Energy Star Ceiling Fan (with Energy Star CFLs): $20/unit High Efficiency Clothes Washers: $50 - $100/unit Energy Star Refrigerators: $50/unit Dual Pane Windows: $0.75/sq. ft.

16

Draft Environmental Assessment for Direct Final Rule, 10 CFR 434, Energy Standards for New Federal Commercial and High-Rise High-Rise Multi-FamilyResidential BuildingsŽ and 10 CFR 435, Energy Efficiency Standards for New Federal Residential Low-Rise Re  

Broader source: Energy.gov (indexed) [DOE]

7 7 Environmental Assessment for Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and High-Rise Multi-Family Residential Buildings" and 10 CFR 435, "Energy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings" (DOE/EA-1463) Environmental Assessment for Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and High-Rise Multi-Family Residential Buildings" and 10 CFR 435, "Energy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings" (DOE/EA-1463) SUMMARY The U.S. Department of Energy (DOE) has prepared this Environmental Assessment (EA) for DOE's Final Rule, 10 CFR 433, "Energy Efficiency Standards for

17

Supporting Photovoltaics in Market-Rate Residential New Construction: A Summary of Programmatic Experience to Date and Lessons Learned  

E-Print Network [OSTI]

of, new, multi- family residential buildings with PV (seemarket-rate, multi-family residential building. One of thecapacity) on multi- family residential buildings. Installed

Barbose, Galen; Wiser, Ryan; Bolinger, Mark

2006-01-01T23:59:59.000Z

18

EA-1463: 10 CFR 433: Energy Efficiency Standards for New Federal Commercial and High-Rise Multi-Family Residential Buildings and 10 CFR 435: Energy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings  

Broader source: Energy.gov [DOE]

The EA examines the potential environmental impacts of the Final Rule on building habitability and the outdoor environment. To identify the potential environmental impacts that may result from implementing the Final Rule for new Federal commercial and residential buildings, DOE compared the Final Rule with the “no-action alternative” of using the current Federal standards – 10 CFR Part 434 and 10 CFR Part 435 Subpart C (referred to as the “no-action alternative”).

19

Residential Buildings  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Apartment building exterior and interior Apartment building exterior and interior Residential Buildings EETD's research in residential buildings addresses problems associated with whole-building integration involving modeling, measurement, design, and operation. Areas of research include the movement of air and associated penalties involving distribution of pollutants, energy and fresh air. Contacts Max Sherman MHSherman@lbl.gov (510) 486-4022 Iain Walker ISWalker@lbl.gov (510) 486-4692 Links Residential Building Systems Group Batteries and Fuel Cells Buildings Energy Efficiency Applications Commercial Buildings Cool Roofs and Heat Islands Demand Response Energy Efficiency Program and Market Trends High Technology and Industrial Systems Lighting Systems Residential Buildings Simulation Tools Sustainable Federal Operations

20

PG&E (Gas) - Multi-Family Residential Energy Efficiency Rebates |  

Broader source: Energy.gov (indexed) [DOE]

PG&E (Gas) - Multi-Family Residential Energy Efficiency Rebates PG&E (Gas) - Multi-Family Residential Energy Efficiency Rebates PG&E (Gas) - Multi-Family Residential Energy Efficiency Rebates < Back Eligibility Multi-Family Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Appliances & Electronics Water Heating Program Info Funding Source System Benefits Charge Expiration Date 12/31/2013 State California Program Type Utility Rebate Program Rebate Amount Clothes Washers (In-Unit): $50 Clothes Washers (Common Area): $150 Central System Water/Space Heating: $1,500/Unit Storage Water Heater: $200/Unit Boilers: $500/Unit Furnace: $150 - $300/Unit Provider Residential Programs Through the Rebates for Multi-Family Properties Program, PG&E offers prescriptive rebates for owners and managers of multi-family properties of

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Residential Buildings  

U.S. Energy Information Administration (EIA) Indexed Site

Residential Residential Residential Buildings Residential buildings-such as single family homes, townhomes, condominiums, and apartment buildings-are all covered by the Residential Energy Consumption Survey (RECS). See the RECS home page for further information. However, buildings that offer multiple accomodations such as hotels, motels, inns, dormitories, fraternities, sororities, convents, monasteries, and nursing homes, residential care facilities are considered commercial buildings and are categorized in the CBECS as lodging. Specific questions may be directed to: Joelle Michaels joelle.michaels@eia.doe.gov CBECS Manager Release date: January 21, 2003 Page last modified: May 5, 2009 10:18 AM http://www.eia.gov/consumption/commercial/data/archive/cbecs/pba99/residential.html

22

Draft Environmental Assessment for Proposed Rule, 10 CFR Part 433, Energy Conservation and Fossil Fuel-Generated Energy Consumption Reduction Standards for the Design and Construction of New Federal Commercial and Multi-Family High-Rise Residential BuildingsŽ  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Draft Environmental Assessment for Proposed Rule, 10 CFR Part 433, Draft Environmental Assessment for Proposed Rule, 10 CFR Part 433, "Energy Conservation and Fossil Fuel-Generated Energy Consumption Reduction Standards for the Design and Construction of New Federal Commercial and Multi-Family High-Rise Residential Buildings" and 10 CFR Part 435 "Energy Conservation and Fossil Fuel-Generated Energy Consumption Reduction Standards for the Design and Construction of New Federal Low-Rise Residential Buildings" (DOE/EA-1778) 2 SUMMARY The U.S. Department of Energy (DOE) has prepared this Environmental Assessment (EA) for DOE's Proposed Rule, 10 CFR Part 433, "Energy Conservation and Fossil Fuel-Generated Energy Consumption Reduction Standards for the Design and Construction of New Federal Commercial and Multi-Family High-Rise Residential

23

Draft Environmental Assessment for Proposed Rule, 10 CFR Part 433, Energy Conservation and Fossil Fuel-Generated Energy Consumption Reduction Standards for the Design and Construction of New Federal Commercial and Multi-Family High-Rise Residential BuildingsŽ  

Broader source: Energy.gov (indexed) [DOE]

Draft Environmental Assessment for Proposed Rule, 10 CFR Part 433, Draft Environmental Assessment for Proposed Rule, 10 CFR Part 433, "Energy Conservation and Fossil Fuel-Generated Energy Consumption Reduction Standards for the Design and Construction of New Federal Commercial and Multi-Family High-Rise Residential Buildings" and 10 CFR Part 435 "Energy Conservation and Fossil Fuel-Generated Energy Consumption Reduction Standards for the Design and Construction of New Federal Low-Rise Residential Buildings" (DOE/EA-1778) 2 SUMMARY The U.S. Department of Energy (DOE) has prepared this Environmental Assessment (EA) for DOE's Proposed Rule, 10 CFR Part 433, "Energy Conservation and Fossil Fuel-Generated Energy Consumption Reduction Standards for the Design and Construction of New Federal Commercial and Multi-Family High-Rise Residential

24

Residential Buildings  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Exterior and interior of apartment building Exterior and interior of apartment building Residential Buildings The study of ventilation in residential buildings is aimed at understanding the role that air leakage, infiltration, mechanical ventilation, natural ventilation and building use have on providing acceptable indoor air quality so that energy and related costs can be minimized without negatively impacting indoor air quality. Risks to human health and safety caused by inappropriate changes to ventilation and air tightness can be a major barrier to achieving high performance buildings and must be considered.This research area focuses primarily on residential and other small buildings where the interaction of the envelope is important and energy costs are dominated by space conditioning energy rather than air

25

PG&E - Multi-Family Residential Energy Efficiency Rebates | Department of  

Broader source: Energy.gov (indexed) [DOE]

PG&E - Multi-Family Residential Energy Efficiency Rebates PG&E - Multi-Family Residential Energy Efficiency Rebates PG&E - Multi-Family Residential Energy Efficiency Rebates < Back Eligibility Multi-Family Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Cooling Appliances & Electronics Other Manufacturing Heat Pumps Commercial Lighting Lighting Insulation Design & Remodeling Water Heating Windows, Doors, & Skylights Program Info Expiration Date 03/01/2013 State California Program Type Utility Rebate Program Rebate Amount Attic Insulation: $0.15/sq. ft. Wall Insulation: $0.50/sq. ft. Clothes Washers: $50 - $150/Unit Refrigerator: $75/unit High Performance Dual Pane Windows: $0.75/sq. ft. Refrigerator, Freezer and Room AC Recycling: $25 - $35

26

SDG&E (Electric) - Multi-Family Residential Efficiency Program | Department  

Broader source: Energy.gov (indexed) [DOE]

Multi-Family Residential Efficiency Program Multi-Family Residential Efficiency Program SDG&E (Electric) - Multi-Family Residential Efficiency Program < Back Eligibility Multi-Family Residential Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Cooling Commercial Heating & Cooling Appliances & Electronics Heat Pumps Commercial Lighting Lighting Water Heating Program Info State California Program Type Utility Rebate Program Rebate Amount Clothes Washers: $75-$150 Room Air Conditioner: $50 Central Heat Pumps: $100 Insulation: $0.15/sq. ft. CFLs: $4-$10 Ceiling Fans with CFLs: $20 Interior Hardwired Fluorescent Fixtures: $32-$45 Exterior Hardwired Fluorescent Fixtures: $30 T12 De-lamping: $6/lamp Water Heaters: $30 Occupancy Sensors: $10 LED Exit Signs: $35 Photocells: $10/unit

27

Building Technologies Office: Residential Buildings  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Residential Buildings Residential Buildings to someone by E-mail Share Building Technologies Office: Residential Buildings on Facebook Tweet about Building Technologies Office: Residential Buildings on Twitter Bookmark Building Technologies Office: Residential Buildings on Google Bookmark Building Technologies Office: Residential Buildings on Delicious Rank Building Technologies Office: Residential Buildings on Digg Find More places to share Building Technologies Office: Residential Buildings on AddThis.com... About Take Action to Save Energy Partner With DOE Activities Technology Research, Standards, & Codes Popular Residential Links Success Stories Previous Next Warming Up to Pump Heat. Lighten Energy Loads with System Design. Cut Refrigerator Energy Use to Save Money. Tools EnergyPlus Whole Building Simulation Program

28

EA-2001: Final Rule, 10 CFR Part 433, ‘Energy Efficiency Standards for New Federal Commercial and Multi-Family High- Rise Residential Buildings’ Baseline Standards Update  

Broader source: Energy.gov [DOE]

The EA examines the potential incremental environmental impacts of the PreliminaryFinal Rule on building habitability and the outdoor environment. To identify the potential environmental impacts that may result from implementing the PreliminaryFinal Rule, DOE compared the PreliminaryFinal Rule with the “no-action alternative” of using the minimum requirements of the previous version of the Federal standard – 10 CFR Part 433 (referred to as the “no-action alternative”).

29

Residential Building Renovations | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Residential Building Renovations Residential Building Renovations Residential Building Renovations October 16, 2013 - 4:57pm Addthis Renewable Energy Options Residential Building Renovations Photovoltaics Daylighting Solar Water Heating Geothermal Heat Pumps (GHP) Biomass Heating In some circumstances, Federal agencies may face construction or renovation of residential units, whether single-family, multi-family, barracks, or prisons. Based on typical domestic energy needs, solar water heating and photovoltaic systems are both options, depending on the cost of offset utilities. These systems can be centralized for multi-family housing to improve system economics. Daylighting can reduce energy costs and increase livability of units. Geothermal heat pumps (GHP) are a particularly cost-effective option in

30

Residential Buildings Integration Program  

Broader source: Energy.gov [DOE]

Residential Buildings Integration Program Presentation for the 2013 Building Technologies Office's Program Peer Review

31

Passive solar design for multi-family buildings. Case studies and conclusions from Massachusetts' Multi-Family Passive Solar Program  

SciTech Connect (OSTI)

This book is the culmination of a four-year effort. It summarizes experiences and conclusions from Massachusetts' Multi-Family Passive Solar Program (MFPS) - a pioneering project conceived at the Executive Office of Energy Resources in February 1979 and still underway. The program educates architects, engineers, and housing officials about passive solar design by addressing problems and opportunities in their own buildings. It is the first major investigation of multi-family passive solar design in this country and has served as a national model. Section I provides an overview of the Multi-Family Passsive Solar Program and its projects, together with a summary of program conclusions and design recommendations. The section should be particularly useful to developers and housing officials interested in passive solar options. Section II presents detailed case studies on seven housing projects containing Energy Office-funded conservation and passive solar features. It gives the reader a thorough analysis of actual multi-family buildings, now occupied or under construction, and lists the unique problems and opportunities each presents. The case studies are candid about design errors, as well as successes, and should help architects and developers avoid similar mistakes. Section III focuses on the key energy design issues for multi-family passive solar buildings and is intended for architects and designers. The section begins with an overview of climate, micro-climate, and thermal comfort, followed by a chapter on what makes multi-family buildings different from homes or offices. Energy-conserving components and installation practices, window selection, and passive solar system design are then discussed in depth. The final chapter points out pitfalls to be avoided when analyzing conservation and solar costs, performance, and cost-effectiveness. The section is followed by appendices.

Rouse, R.E.

1983-01-01T23:59:59.000Z

32

A U.S. and China Regional Analysis of Distributed Energy Resources in Buildings  

E-Print Network [OSTI]

in residential multi-family buildings, from the perspectivea 10-story, high-rise, multi-family building [10,13]. Theand a multi-family residential building in different U.S.

Feng, Wei

2014-01-01T23:59:59.000Z

33

Mikroproduktion av solel i flerfamiljshus; Micro production of solar electricity in multi-family buildings.  

E-Print Network [OSTI]

?? This thesis is commissioned by the Swedish electricity trading company GodEl with the purpose of evaluate solar electricity in multi-family buildings in the Stockholm… (more)

Werner, Linus

2014-01-01T23:59:59.000Z

34

Building Technologies Office: Residential Building Activities  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Residential Building Residential Building Activities to someone by E-mail Share Building Technologies Office: Residential Building Activities on Facebook Tweet about Building Technologies Office: Residential Building Activities on Twitter Bookmark Building Technologies Office: Residential Building Activities on Google Bookmark Building Technologies Office: Residential Building Activities on Delicious Rank Building Technologies Office: Residential Building Activities on Digg Find More places to share Building Technologies Office: Residential Building Activities on AddThis.com... About Take Action to Save Energy Partner With DOE Activities Solar Decathlon Building America Home Energy Score Home Performance with ENERGY STAR Better Buildings Neighborhood Program Challenge Home Guidelines for Home Energy Professionals

35

Building Technologies Office: About Residential Building Programs  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

About Residential About Residential Building Programs to someone by E-mail Share Building Technologies Office: About Residential Building Programs on Facebook Tweet about Building Technologies Office: About Residential Building Programs on Twitter Bookmark Building Technologies Office: About Residential Building Programs on Google Bookmark Building Technologies Office: About Residential Building Programs on Delicious Rank Building Technologies Office: About Residential Building Programs on Digg Find More places to share Building Technologies Office: About Residential Building Programs on AddThis.com... About Take Action to Save Energy Partner With DOE Activities Technology Research, Standards, & Codes Popular Residential Links Success Stories Previous Next Warming Up to Pump Heat.

36

Better Buildings Residential  

Office of Energy Efficiency and Renewable Energy (EERE)

The U.S. Department of Energy's (DOE's) Better Buildings Residential programs  work with residential energy efficiency programs and their partners to improve homeowners' lives, the economy, and the...

37

Fact Sheet- Better Buildings Residential  

Office of Energy Efficiency and Renewable Energy (EERE)

Fact Sheet - Better Buildings Residential, from U.S. Department of Energy, Better Buildings Neighborhood Program.

38

Building America Residential Buildings Energy Efficiency Meeting...  

Broader source: Energy.gov (indexed) [DOE]

Residential Buildings Energy Efficiency Meeting: July 2010 Building America Residential Buildings Energy Efficiency Meeting: July 2010 On this page, you may link to the summary...

39

Designing density : building form and site design for contextually appropriate multi-family housing in Boston's inner-ring suburbs ; Building form and site design for contextually appropriate multi-family housing in Boston's inner-ring suburbs .  

E-Print Network [OSTI]

??This research focuses on multi-family residential development in the inner-ring suburbs around Boston in order to understand how dense housing can be designed in ways… (more)

Kanson-Benanav, Jesse

2009-01-01T23:59:59.000Z

40

Better Buildings Neighborhood Program: Better Buildings Residential  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Better Better Buildings Residential Network-Current Members to someone by E-mail Share Better Buildings Neighborhood Program: Better Buildings Residential Network-Current Members on Facebook Tweet about Better Buildings Neighborhood Program: Better Buildings Residential Network-Current Members on Twitter Bookmark Better Buildings Neighborhood Program: Better Buildings Residential Network-Current Members on Google Bookmark Better Buildings Neighborhood Program: Better Buildings Residential Network-Current Members on Delicious Rank Better Buildings Neighborhood Program: Better Buildings Residential Network-Current Members on Digg Find More places to share Better Buildings Neighborhood Program: Better Buildings Residential Network-Current Members on AddThis.com...

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

City of Austin - Commercial and Residential Green Building Requirements |  

Broader source: Energy.gov (indexed) [DOE]

You are here You are here Home » City of Austin - Commercial and Residential Green Building Requirements City of Austin - Commercial and Residential Green Building Requirements < Back Eligibility Commercial Multi-Family Residential Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Bioenergy Solar Lighting Windows, Doors, & Skylights Buying & Making Electricity Water Heating Water Heating Wind Program Info State Texas Program Type Building Energy Code Provider Austin Energy '''''Note: The requirements listed below are current only up to the date of last review (see the top of this page). The City of Austin may also make additional requirements depending on the circumstances of a given project.

42

Residential Buildings Integration Program  

Broader source: Energy.gov (indexed) [DOE]

David Lee David Lee Program Manager David.Lee@ee.doe.gov 202-287-1785 April 2, 2013 Residential Buildings Integration Program Building Technologies Office Program Peer Review 2 | Building Technologies Office eere.energy.gov Sub-Programs for Review Better Buildings Neighborhood Program Building America Challenge Home Home Energy Score Home Performance with ENERGY STAR Solar Decathlon 3 | Building Technologies Office eere.energy.gov How Residential Buildings Fits into BTO Research & Development * Develop technology roadmaps * Prioritize opportunities * Solicit and select innovative technology solutions * Collaborate with researchers

43

Residential Buildings Integration Program  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

David Lee David Lee Program Manager David.Lee@ee.doe.gov 202-287-1785 April 2, 2013 Residential Buildings Integration Program Building Technologies Office Program Peer Review 2 | Building Technologies Office eere.energy.gov Sub-Programs for Review Better Buildings Neighborhood Program Building America Challenge Home Home Energy Score Home Performance with ENERGY STAR Solar Decathlon 3 | Building Technologies Office eere.energy.gov How Residential Buildings Fits into BTO Research & Development * Develop technology roadmaps * Prioritize opportunities * Solicit and select innovative technology solutions * Collaborate with researchers

44

Encouraging PV Adoption in New Market-Rate Residential Construction: A Critical Review of Program Experiences to Date  

E-Print Network [OSTI]

on new multi-family buildings State Organization Standard PVmulti- family residential construction projects with PV and other green building

Barbose, Galen; Wiser, Ryan; Bolinger, Mark

2006-01-01T23:59:59.000Z

45

City of Frisco - Residential and Commercial Green Building Codes |  

Broader source: Energy.gov (indexed) [DOE]

City of Frisco - Residential and Commercial Green Building Codes City of Frisco - Residential and Commercial Green Building Codes City of Frisco - Residential and Commercial Green Building Codes < Back Eligibility Commercial Multi-Family Residential Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Sealing Your Home Ventilation Insulation Program Info State Texas Program Type Building Energy Code Provider Frisco Department of Planning and Development '''''Note: In the spring on 2012, the city of Frisco was working to update the residential requirements. No official city council action had been taken at the time this summary was updated. Check program web site for current status of updates.''''' The city of Frisco administers a green building program with separate rules

46

Residential Building Code Compliance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

6 6 Residential Building Code Compliance: Recent Findings and Implications Energy use in residential buildings in the U.S. is significant-about 20% of primary energy use. While several approaches reduce energy use such as appliance standards and utility programs, enforcing state building energy codes is one of the most promising. However, one of the challenges is to understand the rate of compliance within the building community. Utility companies typically use these codes as the baseline for providing incentives to builders participating in utility-sponsored residential new construction (RNC) programs. However, because builders may construct homes that fail to meet energy codes, energy use in the actual baseline is higher than would be expected if all buildings complied with the code. Also,

47

Regional Analysis of Building Distributed Energy Costs and CO2 Abatement: A U.S. - China Comparison  

E-Print Network [OSTI]

and a 10-floor high-rise multi-family building [10,13]. Theand a multi-family residential building in different climateU.S. DOE multi-family apartment prototype building, as well

Mendes, Goncalo

2014-01-01T23:59:59.000Z

48

Design, development and testing of a solar-powered multi-family residential size prototype turbocompressor heat pump  

SciTech Connect (OSTI)

A program described to design, fabricate, and conduct preliminary testing of a prototype solar-powered Rankine cycle turbocompressor heat pump module for a multi-family residential building is presented. A solar system designed to use the turbocompressor heat pump module including all of the subsystems required and the various system operating modes is described in Section I. Section II includes the preliminary design analyses conducted to select the heat pump module components and operating features, working fluid, configuration, size and performance goals, and estimated performance levels in the cooling and heating modes. Section III provides a detailed description of the other subsystems and components required for a complete solar installation. Using realistic performance and cost characteristics for all subsystems, the seasonal performance of the UTC heat pump is described in various US locations. In addition, the estimated energy savings and an assessment of the economic viability of the solar system is presented in Section III. The detailed design of the heat pump module and the arrangement of components and controls selected to conduct the laboratory performance tests are described in Section IV. Section V provides a description of the special laboratory test facility, including the subsystems to simulate the collectors and storage tanks for building load and ambient conditions and the instrumentation, monitoring, and data acquisition equipment. The test results and sample computer analyses and comparisons with predicted performance levels are presented in Section VI. Various appendices provide supplementary and background information concerning working fluid selection (A), configuration selection (B), capacity control concepts (C), building models (D), computer programs used to determine component and system performance and total system economics (E), and weather data (F).

None

1981-03-01T23:59:59.000Z

49

NREL: Buildings Research - Residential Capabilities  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Residential Capabilities Photo showing a row of homes in the distance. The NREL Residential Buildings group is an innovative, multidisciplinary team focused on accelerating the...

50

City of Cleveland - Residential Property Tax Abatement for Green Buildings  

Broader source: Energy.gov (indexed) [DOE]

City of Cleveland - Residential Property Tax Abatement for Green City of Cleveland - Residential Property Tax Abatement for Green Buildings City of Cleveland - Residential Property Tax Abatement for Green Buildings < Back Eligibility Construction Low-Income Residential Multi-Family Residential Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Solar Lighting Windows, Doors, & Skylights Heating Buying & Making Electricity Water Heating Wind Program Info Start Date 01/01/2010 State Ohio Program Type Property Tax Incentive Rebate Amount 100% for 10-15 years Provider City of Cleveland Department of Community Development The City of Cleveland, in cooperation with the Cuyahoga County Auditor's Office, provides a 100% tax abatement for residential properties built to

51

Fact Sheet: Better Buildings Residential Network | Department...  

Broader source: Energy.gov (indexed) [DOE]

Fact Sheet: Better Buildings Residential Network Fact Sheet: Better Buildings Residential Network Fact Sheet: Better Buildings Residential Network, increasing the number of...

52

Residential and commercial buildings data book: Third edition  

SciTech Connect (OSTI)

This Data Book updates and expands the previous Data Book originally published by the Department of Energy in September, 1986 (DOE/RL/01830/16). Energy-related information is provided under the following headings: Characteristics of Residential Buildings in the US; Characteristics of New Single Family Construction in the US; Characteristics of New Multi-Family Construction in the US; Household Appliances; Residential Sector Energy Consumption, Prices, and Expenditures; Characteristics of US Commercial Buildings; Commercial Buildings Energy Consumption, Prices, and Expenditures; and Additional Buildings and Community Systems Information. 12 refs., 59 figs., 118 tabs.

Amols, G.R.; Howard, K.B.; Nicholls, A.K.; Guerra, T.D.

1988-02-01T23:59:59.000Z

53

Building Technologies Residential Survey  

SciTech Connect (OSTI)

Introduction A telephone survey of 1,025 residential occupants was administered in late October for the Building Technologies Program (BT) to gather information on residential occupant attitudes, behaviors, knowledge, and perceptions. The next section, Survey Results, provides an overview of the responses, with major implications and caveats. Additional information is provided in three appendices as follows: - Appendix A -- Summary Response: Provides summary tabular data for the 13 questions that, with subparts, comprise a total of 25 questions. - Appendix B -- Benchmark Data: Provides a benchmark by six categories to the 2001 Residential Energy Consumption Survey administered by EIA. These were ownership, heating fuel, geographic location, race, household size and income. - Appendix C -- Background on Survey Method: Provides the reader with an understanding of the survey process and interpretation of the results.

Secrest, Thomas J.

2005-11-07T23:59:59.000Z

54

Building Technologies Office: Partner With DOE and Residential Buildings  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Partner With DOE and Partner With DOE and Residential Buildings to someone by E-mail Share Building Technologies Office: Partner With DOE and Residential Buildings on Facebook Tweet about Building Technologies Office: Partner With DOE and Residential Buildings on Twitter Bookmark Building Technologies Office: Partner With DOE and Residential Buildings on Google Bookmark Building Technologies Office: Partner With DOE and Residential Buildings on Delicious Rank Building Technologies Office: Partner With DOE and Residential Buildings on Digg Find More places to share Building Technologies Office: Partner With DOE and Residential Buildings on AddThis.com... About Take Action to Save Energy Partner With DOE Activities Technology Research, Standards, & Codes Popular Residential Links

55

Sustainability assessment of renovation packages for increased energy efficiency for multi-family buildings in Sweden  

Science Journals Connector (OSTI)

In this paper, we propose a method for assessing renovation packages drawn up with the goal of increasing energy efficiency. The method includes calculation of bought energy demand, life-cycle cost (LCC) analysis and assessment of the building according to the Swedish environmental rating tool Miljöbyggnad (MB). In this way the methodology assesses economic, indoor environmental quality (IEQ) and specifically environmental aspects associated with energy demand of such packages from a sustainability point-of-view. Through MB, energy efficiency packages are placed in context with other necessary measures required to improve environmental performance in buildings, providing a consistent and systematic basis other than simply financial performance by which to compare capital improvements. The method is further explained and analyzed by applying it in three case studies. In each case study a multi-family building representing a typologically significant class in the Swedish building stock is considered, and for each building a base case and two renovation packages with higher initial investment requirement and higher energy efficiency are defined. It is shown that higher efficiency packages can impact IEQ indicators both positively and negatively and that packages reducing energy demand by approx. 50% have somewhat higher LCC. Identified positive IEQ impacts point to added value for packages that may not otherwise be communicated, while negative impacts identify areas where packages need to be improved, or where MB indicators may be referred to as specifications in procurement procedures.

Nils W.O. Brown; Tove Malmqvist; Wei Bai; Marco Molinari

2013-01-01T23:59:59.000Z

56

Better Buildings Residential Network Orientation Peer Exchange...  

Broader source: Energy.gov (indexed) [DOE]

Better Buildings Residential Network Orientation Peer Exchange Webinar Better Buildings Residential Network Orientation Peer Exchange Webinar September 11, 2014 7:00PM to 8:3...

57

Better Buildings Residential Network Membership Form | Department...  

Broader source: Energy.gov (indexed) [DOE]

Network Membership Form Better Buildings Residential Network Membership Form Membership form from the U.S. Department of Energy's Better Buildings Residential Network Recommended...

58

Residential and commercial buildings data book. Second edition  

SciTech Connect (OSTI)

This Data Book updates and expands the previous Data Book originally published by the Department of Energy in October, 1984 (DOE/RL/01830/16). Energy-related information is provided under the following headings: Characteristics of Residential Buildings in the US; Characteristics of New Single Family Construction in the US; Characteristics of New Multi-Family Construction in the US; Household Appliances; Residential Sector Energy Consumption, Prices, and Expenditures; Characteristics of US Commercial Buildings; Commercial Buildings Energy Consumption, Prices, and Expenditures; Additional Buildings and Community Systems Information. This Data Book complements another Department of Energy document entitled ''Overview of Building Energy Use and Report of Analysis-1985'' October, 1985 (DOE/CE-0140). The Data Book provides supporting data and documentation to the report.

Crumb, L.W.; Bohn, A.A.

1986-09-01T23:59:59.000Z

59

NREL: Buildings Research - Residential Buildings Research Staff  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Residential Buildings Research Staff Residential Buildings Research Staff Members of the Residential Buildings research staff have backgrounds in architectural, civil, electrical, environmental, and mechanical engineering, as well as environmental design and physics. Ren Anderson Dennis Barley Chuck Booten Jay Burch Sean Casey Craig Christensen Dane Christensen Lieko Earle Cheryn Engebrecht Mike Gestwick Mike Heaney Scott Horowitz Kate Hudon Xin Jin Noel Merket Tim Merrigan David Roberts Joseph Robertson Stacey Rothgeb Bethany Sparn Paulo Cesar Tabares-Velasco Jeff Tomerlin Jon Winkler Jason Woods Support Staff Marcia Fratello Kristy Usnick Photo of Ren Anderson Ren Anderson, Ph.D., Manager, Residential Research Group ren.anderson@nrel.gov Research Focus: Evaluating the whole building benefits of emerging building energy

60

Presentation: Better Buildings Residential Program Solution Center  

Broader source: Energy.gov [DOE]

Presentation: Better Buildings Residential Program Solution Center, from the U.S. Department of Energy, Better Buildings Neighborhood Program.

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Catalog of thermal bridges in commercial and multi-family residential construction  

SciTech Connect (OSTI)

The catalog comprises a collection of 21 thermal bridges commonly encountered in commercial buildings, as well as alternative construction techniques which reduce the deleterious effects of these bridges. The thermal bridges presented here are conduction-dominated. Construction details which transfer heat mostly through convection or radiation are not addressed. The benefits of the alternate designs are expressed for each thermal bridge as (1) reductions in U-values and (2) reductions in moisture condensation. These reductions, in turn, are extrapolated at the whole building level in order to predict changes in the energy used for space heating and cooling and to estimate changes in the magnitude of the surface areas affected by moisture condensation. Finally, technical notes address the probable effects (thermal and moisture) of minor variations in the construction details presented in this catalog. The technical notes also give a more detailed prediction of the potential for moisture condensation due to thermal bridging.

Tuluca, A.N.; Evans, D.M.; Kumar, D.; Krarti, M. (Winter (Steven) Associates, Inc., New York, NY (USA)); Childs, K.; Courville, G. (Oak Ridge National Lab., TN (USA)); Vonier, T. (Vonier (Thomas) Associates, Inc., Washington, DC (USA)); Tye, R. (Holometrix, Inc., Cambridge, MA (USA))

1989-12-01T23:59:59.000Z

62

Fact Sheet: Better Buildings Residential Network  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

bbrn What Is the Residential Network? The Better Buildings Residential Network connects energy efficiency programs and partners to share best practices and learn from one another...

63

Building America Residential Energy Efficiency Technical Update...  

Energy Savers [EERE]

Residential Energy Efficiency Technical Update Meeting: August 2011 Building America Residential Energy Efficiency Technical Update Meeting: August 2011 On this page, you may link...

64

Better Buildings Residential Network | Department of Energy  

Energy Savers [EERE]

more. Residential Network Members Welcome Our Newest Members Cascadia Consulting Group Johnson Environmental The Building Performance Center, Inc. *Residential Network members that...

65

Differential rates for district heating and the influence on the optimal retrofit strategy for multi-family buildings  

Science Journals Connector (OSTI)

When renovating existing multi-family buildings it is very important to implement the best retrofit strategy possible in order to minimize the remaining life-cycle cost for the building. If the building is heated with district heating this strategy of course changes due to the energy rate used by the utility. It is also very important for the utility that the consumer is encouraged to save energy when there is a need for it, i.e. during peak load conditions. Our paper shows that an accurate cost differential rate provides all these facilities.

Stig-Inge Gustafsson; Björn G. Karlsson; Bertil H. Sjöholm

1987-01-01T23:59:59.000Z

66

Building Technologies Office: Residential Building Activities  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Building Activities Building Activities The Department of Energy (DOE) is leading several different activities to develop, demonstrate, and deploy cost-effective solutions to reduce energy consumption across the residential building sector by at least 50%. The U.S. DOE Solar Decathlon is a biennial contest which challenges college teams to design and build energy efficient houses powered by the sun. Each team competes in 10 contests designed to gauge the performance, livability and affordability of their house. The Building America program develops market-ready energy solutions that improve the efficiency of new and existing homes while increasing comfort, safety, and durability. Guidelines for Home Energy Professionals foster the growth of a high quality residential energy upgrade industry and a skilled and credentialed workforce.

67

Burlington Electric Department - Multi-Family Rental Energy Efficiency  

Broader source: Energy.gov (indexed) [DOE]

Multi-Family Rental Energy Multi-Family Rental Energy Efficiency Rebate Program Burlington Electric Department - Multi-Family Rental Energy Efficiency Rebate Program < Back Eligibility Multi-Family Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Appliances & Electronics Commercial Lighting Lighting Maximum Rebate Rebates totaling over 2,500 must be pre-approved by BED More than 15 free CFL's per apartment or 100 free CFL's per building requires pre-approval Program Info State Vermont Program Type Utility Rebate Program Rebate Amount CFLs: Free Ventilation Systems: $110/unit Boilers: $2/MBh Furnaces: $2/MBh Electronically Commutated Motor: $100 Refrigerators: $150/unit Lighting: In-store discounts Provider Burlington Electric Department Burlington Electric Department offers an innovative rebate program geared

68

Building Technologies Office: Residential Dishwashers, Dehumidifiers, and  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Residential Residential Dishwashers, Dehumidifiers, and Cooking Products, and Commercial Clothes Washers ANOPR Public Meeting to someone by E-mail Share Building Technologies Office: Residential Dishwashers, Dehumidifiers, and Cooking Products, and Commercial Clothes Washers ANOPR Public Meeting on Facebook Tweet about Building Technologies Office: Residential Dishwashers, Dehumidifiers, and Cooking Products, and Commercial Clothes Washers ANOPR Public Meeting on Twitter Bookmark Building Technologies Office: Residential Dishwashers, Dehumidifiers, and Cooking Products, and Commercial Clothes Washers ANOPR Public Meeting on Google Bookmark Building Technologies Office: Residential Dishwashers, Dehumidifiers, and Cooking Products, and Commercial Clothes Washers ANOPR

69

Better Buildings Neighborhood Program: Residential Energy Efficiency  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Residential Residential Energy Efficiency Solutions: From Innovation to Market Transformation Conference, July 2012 to someone by E-mail Share Better Buildings Neighborhood Program: Residential Energy Efficiency Solutions: From Innovation to Market Transformation Conference, July 2012 on Facebook Tweet about Better Buildings Neighborhood Program: Residential Energy Efficiency Solutions: From Innovation to Market Transformation Conference, July 2012 on Twitter Bookmark Better Buildings Neighborhood Program: Residential Energy Efficiency Solutions: From Innovation to Market Transformation Conference, July 2012 on Google Bookmark Better Buildings Neighborhood Program: Residential Energy Efficiency Solutions: From Innovation to Market Transformation Conference, July 2012 on Delicious

70

Residential Buildings Historical Publications reports, data and...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

1 Average Fuel OilKerosene Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per...

71

Residential Buildings Historical Publications reports, data and...  

Gasoline and Diesel Fuel Update (EIA)

4 Average Electricity Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household...

72

Residential Buildings Historical Publications reports, data and...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

0 Average LPG Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households...

73

Residential Buildings Historical Publications reports, data and...  

Gasoline and Diesel Fuel Update (EIA)

0 Average Electricity Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household...

74

Residential Buildings Historical Publications reports, data and...  

Gasoline and Diesel Fuel Update (EIA)

7 Average Electricity Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household...

75

Residential Buildings Historical Publications reports, data and...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

1 Average Natural Gas Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household...

76

Residential Buildings Historical Publications reports, data and...  

Gasoline and Diesel Fuel Update (EIA)

90 Average Fuel OilKerosene Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per...

77

Residential Buildings Historical Publications reports, data and...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

2 Average Electricity Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household...

78

Residential Buildings Historical Publications reports, data and...  

Gasoline and Diesel Fuel Update (EIA)

1 Average Electricity Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household...

79

Residential Buildings Historical Publications reports, data and...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

7 Average Fuel OilKerosene Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per...

80

Residential Buildings Historical Publications reports, data and...  

Gasoline and Diesel Fuel Update (EIA)

2 Average Fuel OilKerosene Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per...

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Residential Buildings Historical Publications reports, data and...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

7 Average LPG Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households...

82

Residential Buildings Historical Publications reports, data and...  

Gasoline and Diesel Fuel Update (EIA)

0 Average Fuel OilKerosene Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per...

83

Residential Buildings Historical Publications reports, data and...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

2 Average LPG Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households...

84

Residential Buildings Historical Publications reports, data and...  

Gasoline and Diesel Fuel Update (EIA)

4 Average Fuel OilKerosene Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per...

85

Presentation: Better Buildings Residential Program Solution Center  

Broader source: Energy.gov [DOE]

Presentation: Better Buildings Residential Program Solution Center, from the U.S. Department of Energy's Better Buildings Neighborhood Program, April 2014.

86

Residential Building Integration Program Overview - 2014 BTO...  

Broader source: Energy.gov (indexed) [DOE]

Building Integration Program Overview - 2014 BTO Peer Review Residential Building Integration Program Overview - 2014 BTO Peer Review Presenter: David Lee, U.S. Department of...

87

NREL Residential Buildings Group Partners - Datasets - OpenEI...  

Open Energy Info (EERE)

Residential Buildings ... Dataset Activity Stream NREL Residential Buildings Group Partners This spreadsheet contains a list of all the companies with which NREL's Residential...

88

THE PENNSYLVANIA STATE UNIVERSITY HANKIN CHAIR IN RESIDENTIAL BUILDING CONSTRUCTION  

E-Print Network [OSTI]

research in the areas of residential building design and construction, sustainable buildings, energy issues in residential buildings, lifecycle analysis of buildings and related infrastructure, and sustainable landTHE PENNSYLVANIA STATE UNIVERSITY HANKIN CHAIR IN RESIDENTIAL BUILDING CONSTRUCTION The College

Guiltinan, Mark

89

Energy Efficiency Trends in Residential and Commercial Buildings...  

Energy Savers [EERE]

Energy Efficiency Trends in Residential and Commercial Buildings - August 2010 Energy Efficiency Trends in Residential and Commercial Buildings - August 2010 Overview of building...

90

Better Buildings Residential Network Case Study: Partnerships  

Broader source: Energy.gov [DOE]

Better Buildings Residential Network Case Study: Partnerships, from the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy.

91

Residential Buildings Integration | Department of Energy  

Office of Environmental Management (EM)

demonstrating, and deploying cost-effective solutions, BTO strives to reduce energy consumption across the residential building sector by at least 50%. Research and Development...

92

Air Barriers for Residential and Commercial Buildings  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Air Barriers for Residential and Air Barriers for Residential and Commercial Buildings Diana Hun, PhD Oak Ridge National Laboratory dehun@ornl.gov 865-574-5139 April 4, 2013 BTO Program Peer Review 2 | Building Technologies Office eere.energy.gov Problem Statement & Project Focus - Air leakage is a significant contributor to HVAC loads - ~50% in residential buildings (Sherman and Matson 1997) - ~33% of heating loads in office buildings (Emmerich et al. 2005) - Airtightness of buildings listed in BTO prioritization tool

93

Air Barriers for Residential and Commercial Buildings  

Broader source: Energy.gov (indexed) [DOE]

Air Barriers for Residential and Air Barriers for Residential and Commercial Buildings Diana Hun, PhD Oak Ridge National Laboratory dehun@ornl.gov 865-574-5139 April 4, 2013 BTO Program Peer Review 2 | Building Technologies Office eere.energy.gov Problem Statement & Project Focus - Air leakage is a significant contributor to HVAC loads - ~50% in residential buildings (Sherman and Matson 1997) - ~33% of heating loads in office buildings (Emmerich et al. 2005) - Airtightness of buildings listed in BTO prioritization tool

94

Energy Department Announces $5 Million for Residential Building...  

Office of Environmental Management (EM)

Announces 5 Million for Residential Building Energy Efficiency Research and University-Industry Partnerships Energy Department Announces 5 Million for Residential Building Energy...

95

Better Buildings Residential Program - 2014 BTO Peer Review ...  

Broader source: Energy.gov (indexed) [DOE]

Residential Program - 2014 BTO Peer Review Better Buildings Residential Program - 2014 BTO Peer Review Presenter: Danielle Byrnett, U.S. Department of Energy The Better Buildings...

96

Better Buildings Residential Network: Lessons Learned: Peer Exchange...  

Broader source: Energy.gov (indexed) [DOE]

Network: Lessons Learned: Peer Exchange Calls Better Buildings Residential Network: Lessons Learned: Peer Exchange Calls Better Buildings Residential Network: Lessons Learned: Peer...

97

A comparative appraisal of the use of rainwater harvesting in single and multi-family buildings of the Metropolitan Area of Barcelona (Spain): social experience, drinking water savings and economic costs  

Science Journals Connector (OSTI)

Many urban areas suffer water scarcity but paradoxically, a local source of water such as rainwater is mostly treated as a risk rather than as a valuable resource. Scepticism regarding the use of rainwater harvesting technologies still prevails today, particularly in low precipitation areas. However, some regions such as the Metropolitan Area of Barcelona (MAB) have started to promote the use of rainwater through specific regulations and incentives. This paper aims to examine the use of rainwater harvesting in the two main types of buildings prevalent in the MAB by analysing users’ practices and perceptions, drinking water savings and economic costs. Despite low precipitation inputs and a high variability of precipitation, daily balances show that toilet flushing demand of a single family house can be practically met with a relatively small tank. Rooftop rainwater can also meet more than 60% of the landscape irrigation demand in both single and multi-family buildings. The main drawback is the long pay-back period that rainwater harvesting systems present today. Nevertheless, it is remarkable that in multi-family buildings residents usually take no notice of the costs associated with the system. In contrast, benefits for the whole society are usually much more appreciated. Users’ reactions and their level of satisfaction towards rainwater harvesting systems suggest that both regulations and subsidies are good strategies to advocate and expand rainwater harvesting technologies in residential areas. However, a multidirectional learning environment needs to be promoted to ensure a proper use of rainwater harvesting systems and risk minimisation.

Laia Domènech; David Saurí

2011-01-01T23:59:59.000Z

98

The impact of building-integrated photovoltaics on the energy demand of multi-family dwellings in Brazil  

Science Journals Connector (OSTI)

Brazil faces a continuous increase of energy demand and a decrease of available resources to expand the generation system. Residential buildings are responsible for 23% of the national electricity demand. Thus, it is necessary to search for new energy sources to both diversify and complement the energy mix. Building-integrated photovoltaic (BIPV) is building momentum worldwide and can be an interesting alternative for Brazil due its solar radiation characteristics. This work analyses the potential of seven BIPV technologies implemented in a residential prototype simulated in three different cities in Brazil (Natal, Brasília and Florianópolis). Simulations were performed using the software tool EnergyPlus to integrate PV power supply with building energy demand (domestic equipment and HVAC systems). The building model is a typical low-cost residential building for middle-class families, as massively constructed all over the country. Architectural input and heat gain schedules are defined from statistical data (Instituto Brasileiro de Geografia e Estatística—Brazilian Institute for Geography and Statistics (IBGE) and Sistema de Informações de Posses de Eletrodomésticos e Hábitos de Consumo—Consumer Habits and Appliance Ownership Information System (SIMPHA)). BIPV is considered in all opaque surfaces of the envelope. Results present an interesting potential for decentralized PV power supply even for vertical surfaces at low-latitude sites. In each façade, BIPV power supply can be directly linked to local climatic conditions. In general, for 30% of the year photovoltaic systems generate more energy than building demand, i.e., during this period it could be supplying the energy excess to the public electricity grid. Contrary to the common belief that vertical integration of PV is only suitable for high latitude countries, we show that there is a considerable amount of energy to be harvested from vertical façades at the sites investigated.

Martin Ordenes; Deivis Luis Marinoski; Priscila Braun; Ricardo Rüther

2007-01-01T23:59:59.000Z

99

Building Technologies Office: Residential Furnaces and Boilers Framework  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Residential Furnaces Residential Furnaces and Boilers Framework Meeting to someone by E-mail Share Building Technologies Office: Residential Furnaces and Boilers Framework Meeting on Facebook Tweet about Building Technologies Office: Residential Furnaces and Boilers Framework Meeting on Twitter Bookmark Building Technologies Office: Residential Furnaces and Boilers Framework Meeting on Google Bookmark Building Technologies Office: Residential Furnaces and Boilers Framework Meeting on Delicious Rank Building Technologies Office: Residential Furnaces and Boilers Framework Meeting on Digg Find More places to share Building Technologies Office: Residential Furnaces and Boilers Framework Meeting on AddThis.com... About Standards & Test Procedures Implementation, Certification & Enforcement

100

Fact Sheet: Better Buildings Residential Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sheet Sheet BETTER BUILDINGS RESIDENTIAL NETWORK Learn more at betterbuildings.energy.gov/bbrn What Is the Residential Network? The Better Buildings Residential Network connects energy efficiency programs and partners to share best practices and learn from one another to dramatically increase the number of American homes that are energy efficient. Since 2010, the U.S. Department of Energy (DOE), local Better Buildings Neighborhood Program partners, and Home Performance with ENERGY STAR ® Sponsors have leveraged over $1 billion in federal funding and local resources to build more energy-efficient communities. DOE is now expanding this network of residential energy efficiency programs and partners to new members. Who Should Join? Network membership is open to all organizations that are committed to accelerating the pace of energy

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Better Buildings Residential Program Solution Center Demonstration Webinar  

Broader source: Energy.gov [DOE]

Demonstration webinar slides for Better Buildings Residential Program Solution Center, November 19, 2014.

102

Discover the New Better Buildings Residential Program Solution Center  

Broader source: Energy.gov [DOE]

A transcript of "Discover the New Better Buildings Residential Program Solution Center," Better Buildings Neighborhood Program Webcast, June 19, 2014.

103

Membership Criteria: Better Buildings Residential network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Criteria Criteria BETTER BUILDINGS RESIDENTIAL NETWORK Learn more at betterbuildings.energy.gov/bbrn Better Buildings Residential Network (BBRN) members must be supportive of residential energy efficiency and the mission of the BBRN. Members are expected to be legally incorporated organizations or institutions, rather than individuals, actively engaged in the field of existing residential building energy efficiency with an ability to impact the market. Members should have the ability and capacity to carry out the requirements for membership (i.e., reporting the annual number of upgrades in their sphere of influence, and associated benefits), and actively engage as a member. Members must actively engage in significant work supporting, studying, researching, reporting, and/or

104

Building Technologies Office: Residential Energy Efficiency Stakeholder  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Energy Efficiency Stakeholder Meeting - Spring 2012 Energy Efficiency Stakeholder Meeting - Spring 2012 The U.S. Department of Energy (DOE) Building America program held the second annual Residential Energy Efficiency Stakeholder Meeting on February 29-March 2, 2012, in Austin, Texas. At this meeting, hundreds of building industry professionals came together to share their perspective on the most current innovation projects in the residential buildings sector. This meeting provided an opportunity for researchers and industry stakeholders to showcase and discuss the latest in cutting-edge, energy-efficient residential building technologies and practices. The meeting also included working sessions from each Standing Technical Committee (STC), which outlined work that will best assist in overcoming technical challenges and delivering Building America research results to the market. Learn more about the STCs and the research planning process.

105

U.S. Residential Miscellaneous Refrigeration Products: Results from Amazon Mechanical Turk Surveys  

E-Print Network [OSTI]

dormitory multi-family apartment building mobile orfamily house multi-family apartment building mobile or

Greenblatt, Jeffery B.

2014-01-01T23:59:59.000Z

106

Energy retrofitting of a typical old Danish multi-family building to a “nearly-zero” energy building based on experiences from a test apartment  

Science Journals Connector (OSTI)

The purpose of the research described in this paper was to demonstrate that an old Danish multi-family building built in 1896 could be retrofitted to a “nearly-zero” energy building. Three types of retrofit measures were implemented in a “test” apartment to obtain practical experiences. The first measure was the installation of two different types of interior insulation, specifically, an insulation component consisting of an aerogel–stone wool mixture or vacuum insulation panels. The second measure related to the retrofit of windows in which five measures were completed that consisted of applying a secondary frame, a sash mounted on the frame or to coupled frames. The third measure consisted of installing a decentralised mechanical ventilation system with heat recovery. The results showed that following the retrofit the building's theoretical energy use diminished from 162.5 kWh/(m2 year) to 51.5 kWh/(m2 year), corresponding to a reduction in energy use of 68%. The theoretical energy use after retrofitting fulfilled the requirements for new buildings in Denmark. The practical experiences that were retained following the retrofit were that the ventilation system ought to be installed with low noise components, insulation materials must be sized and cut to fit on site, and that new windows were selected.

Martin Morelli; Leif Rønby; Svend Erik Mikkelsen; Maja G. Minzari; Troels Kildemoes; Henrik M. Tommerup

2012-01-01T23:59:59.000Z

107

Improving the Energy Efficiency of Residential Buildings | Department of  

Broader source: Energy.gov (indexed) [DOE]

Residential Buildings Residential Buildings Improving the Energy Efficiency of Residential Buildings Visitors Tour Solar Decathlon Homes Featuring the Latest in Energy Efficient Building Technology. Learn More Visitors Tour Solar Decathlon Homes Featuring the Latest in Energy Efficient Building Technology. Learn More The Building Technologies Office (BTO) collaborates with the residential building industry to improve the energy efficiency of both new and existing homes. By developing, demonstrating, and deploying cost-effective solutions, BTO strives to reduce energy consumption across the residential building sector by at least 50%. Research and Development Conduct research that focuses on engineering solutions to design, test, and

108

Better Buildings Residential Program Solution Center Demonstration  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Danielle Sass Byrnett Better Buildings Residential Building Technologies Office Program Solution Center Demonstration Outline * Goals, History, Content Sources * Tour: Organization - Program Components - Handbooks * Tour: Navigation Options * Tour: Examples * Next Steps * Questions & Feedback 2 eere.energy.gov Overview 3 eere.energy.gov Purpose: Support Residential Energy Efficiency Upgrade Programs & Partners * Provide an easily accessed repository for key lessons, resources, and knowledge collected from the experience of past programs. * Help programs and their partners plan, implement, manage, and evaluate better * Help stakeholders leapfrog past missteps en route to a larger and more successful industry. 4 eere.energy.gov Intended Audiences

109

Evaluating Residential Buildings for Statewide Compliance | Building Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Residential Buildings for Statewide Compliance Residential Buildings for Statewide Compliance The materials for this course may be used for in-person training courses, and are intended to provide the tools and specific training necessary to evaluate residential compliance with the 2009 International Energy Conservation Code (IECC). The course also provides useful training in general residential field inspection for energy code compliance. The recommended background for taking this course is significant experience and/or certification on the IECC in a plan review or inspection capacity. Presenters: Course materials originally published by the DOE Building Energy Codes Program, July 16, 2010. Course Type: Training Materials Video In-person Downloads: Presentation Slides Presentation Slides Presentation Slides and Windows Media Videos

110

Building America Research Teams: Spotlight on Alliance for Residential Building Innovation (ARBI) and Building America Research Alliance (BARA)  

Broader source: Energy.gov [DOE]

This article profiles the Building America teams, Alliance for Residential Building Innovation (ARBI) and Building America Research Alliance (BARA).

111

Energy Data Sourcebook for the U.S. Residential Sector  

E-Print Network [OSTI]

single-family and multi-family buildings (representingsingle-family and multi-family buildings. The prototypes aresingle-family and multi- family buildings. The survey also

Wenzel, T.P.

2010-01-01T23:59:59.000Z

112

Better Buildings Neighborhood Program: What's Working in Residential Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

What's Working What's Working in Residential Energy Efficiency Upgrade Programs Workshop, May 2011 to someone by E-mail Share Better Buildings Neighborhood Program: What's Working in Residential Energy Efficiency Upgrade Programs Workshop, May 2011 on Facebook Tweet about Better Buildings Neighborhood Program: What's Working in Residential Energy Efficiency Upgrade Programs Workshop, May 2011 on Twitter Bookmark Better Buildings Neighborhood Program: What's Working in Residential Energy Efficiency Upgrade Programs Workshop, May 2011 on Google Bookmark Better Buildings Neighborhood Program: What's Working in Residential Energy Efficiency Upgrade Programs Workshop, May 2011 on Delicious Rank Better Buildings Neighborhood Program: What's Working in Residential Energy Efficiency Upgrade Programs Workshop, May 2011 on Digg

113

Better Buildings Residential Network: Lessons Learned: Peer Exchange Calls  

Broader source: Energy.gov [DOE]

Better Buildings Residential Network: Lessons Learned: Peer Exchange Calls, from the U.S. Department of Energy.

114

Steven Winter Associates (Consortium for Advanced Residential Buildings) |  

Open Energy Info (EERE)

Winter Associates (Consortium for Advanced Residential Buildings) Winter Associates (Consortium for Advanced Residential Buildings) Jump to: navigation, search Name Steven Winter Associates (Consortium for Advanced Residential Buildings) Place Norwalk, CT Information About Partnership with NREL Partnership with NREL Yes Partnership Type Incubator Partnering Center within NREL Electricity Resources & Building Systems Integration LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! Steven Winter Associates (Consortium for Advanced Residential Buildings) is a company located in Norwalk, CT. References Retrieved from "http://en.openei.org/w/index.php?title=Steven_Winter_Associates_(Consortium_for_Advanced_Residential_Buildings)&oldid=379243" Categories: Clean Energy Organizations

115

Residential Building Industry Consulting Services | Open Energy Information  

Open Energy Info (EERE)

Residential Building Industry Consulting Services Residential Building Industry Consulting Services Jump to: navigation, search Name Residential Building Industry Consulting Services Place New York, NY Information About Partnership with NREL Partnership with NREL Yes Partnership Type Test & Evaluation Partner Partnering Center within NREL Electricity Resources & Building Systems Integration LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! Residential Building Industry Consulting Services is a company located in New York, NY. References Retrieved from "http://en.openei.org/w/index.php?title=Residential_Building_Industry_Consulting_Services&oldid=381757" Categories: Clean Energy Organizations Companies Organizations What links here Related changes Special pages

116

Current Status and Future Scenarios of Residential Building Energy Consumption in China  

E-Print Network [OSTI]

The China Residential Energy Consumption Survey, Human andof Residential Building Energy Consumption in China Nan ZhouResidential Building Energy Consumption in China Nan Zhou*,

Zhou, Nan

2010-01-01T23:59:59.000Z

117

Measuring Airflows at Registers in Residential Buildings  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Measuring Airflows at Registers in Residential Buildings Measuring Airflows at Registers in Residential Buildings Speaker(s): Cyril Guillot Date: August 29, 2002 - 12:00pm Location: Bldg. 90 Measuring airflows at registers is a central issue in all HVAC (Heating Ventilation and Air Conditioning) studies. It is a basic measurement that is required in many Cooling/Heating systems tests and in air conditioner performance diagnostics. These measurements can, for instance, be used to determine if individual rooms receive adequate airflow in terms of comfort, to estimate total air handler flow and supply/return imbalances, and to assess duct air leakage. First, I calibrated the Minneapolis Duct Blasters, useful in the most accurate flow hood we have, then I worked on an existing project: measuring airflows with laundry baskets. Finally, I

118

Improving Building Envelope and Duct Airtightness of US Dwellings The  

E-Print Network [OSTI]

the building envelope and duct system airtightness of US single-family detached homes, manufactured homes, and multi-family homes, before and after energy retrofits. These data are part of the Residential Improving Building Envelope

119

Partner With DOE and Residential Buildings | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Residential Buildings » Partner With DOE and Residential Buildings Residential Buildings » Partner With DOE and Residential Buildings Partner With DOE and Residential Buildings The U.S. Department of Energy (DOE) partners with a variety of organizations to improve the energy efficiency of residential buildings. Home builders, governments, researchers, and universities have several opportunities to work with the Building Technologies Office and other DOE projects. Home Builders Home builders who want to be recognized for building high performance homes can find out what it takes to participate in DOE's Challenge Home and sign up today. DOE Challenge Homes are verified by a qualified third-party and are at least 40%-50% more energy efficient than a typical new home. State or Local Governments, Utilities, and Other Organizations

120

About the Better Buildings Residential Network | Department of...  

Office of Environmental Management (EM)

partners to share best practices and learn from one another to increase the number of homes that are energy efficient. Better Buildings Residential programs and partners have...

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book [EERE]

1 1 2005 Energy Expenditures per Household, by Housing Type and Square Footage ($2010) Per Household Single-Family 1.16 Detached 1.16 Attached 1.20 Multi-Family 1.66 2 to 4 units 1.90 5 or more units 1.53 Mobile Home 1.76 All Homes 1.12 Note(s): Source(s): 1) Energy expenditures per square foot were calculated using estimates of average heated floor space per household. According to the 2005 Residential Energy Consumption Survey (RECS), the average heated floor space per household in the U.S. was 1,618 square feet. Average total floor space, which includes garages, attics and unfinished basements, equaled 2,309 square feet. EIA, 2005 Residential Energy Consumption Survey, Oct. 2008, Table US-1 part1; and EIA, Annual Energy Review 2010, Oct. 2011, Appendix D, p. 353 for

122

Ozone Reductions Using Residential Building Envelopes  

SciTech Connect (OSTI)

Ozone is an air pollutant with that can have significant health effects and a significant source of ozone in some regions of California is outdoor air. Because people spend the vast majority of their time indoors, reduction in indoor levels of ozone could lead to improved health for many California residents. Ozone is removed from indoor air by surface reactions and can also be filtered by building envelopes. The magnitude of the envelope impact depends on the specific building materials that the air flows over and the geometry of the air flow paths through the envelope that can be changes by mechanical ventilation operation. The 2008 Residential Building Standards in California include minimum requirements for mechanical ventilation by referencing ASHRAE Standard 62.2. This study examines the changes in indoor ozone depending on the mechanical ventilation system selected to meet these requirements. This study used detailed simulations of ventilation in a house to examine the impacts of different ventilation systems on indoor ozone concentrations. The simulation results showed that staying indoors reduces exposure to ozone by 80percent to 90percent, that exhaust ventilation systems lead to lower indoor ozone concentrations, that opening of windows should be avoided at times of high outdoor ozone, and that changing the time at which mechanical ventilation occurs has the ability to halve exposure to ozone. Future work should focus on the products of ozone reactions in the building envelope and the fate of these products with respect to indoor exposures.

Walker, Iain S.; Sherman, Max; Nazaroff, William W.

2009-02-01T23:59:59.000Z

123

Sustainability Assessment of Residential Building Energy System in Belgrade  

E-Print Network [OSTI]

of harmful substances. Multi-criteria method is a basic tool for the sustainability assessment in metropolitan cities. The design of potential options is the first step in the evaluation of buildings. The selection of a number of residential buildings...

Vucicevic, B.; Bakic, V.; Jovanovic, M.; Turanjanin, V.

2010-01-01T23:59:59.000Z

124

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book [EERE]

3 3 Building Type Pre-1995 1995-2005 Pre-1995 1995-2005 Pre-1995 1995-2005 Single-Family 38.4 44.9 102.7 106.2 38.5 35.5 Detached 37.9 44.7 104.5 107.8 38.8 35.4 Attached 43.8 55.5 86.9 85.1 34.2 37.6 Multi-Family 63.8 58.7 58.3 49.2 27.2 24.3 2 to 4 units 69.0 55.1 70.7 59.4 29.5 25.0 5 or more units 61.5 59.6 53.6 47.2 26.3 24.2 Mobile Homes 82.4 57.1 69.6 74.5 29.7 25.2 Note(s): Source(s): 2005 Residential Delivered Energy Consumption Intensities, by Principal Building Type and Vintage Per Square Foot (thousand Btu) (1) Per Household (million Btu) Per Household Member (million Btu) 1) Energy consumption per square foot was calculated using estimates of average heated floor space per household. According to the 2005 Residential Energy Consumption Survey (RECS), the average heated floor space per household in the U.S. was 1,618 square feet. Average

125

California Solar Initiative - Multi-Family Affordable Solar Housing (MASH)  

Broader source: Energy.gov (indexed) [DOE]

California Solar Initiative - Multi-Family Affordable Solar Housing California Solar Initiative - Multi-Family Affordable Solar Housing (MASH) Program California Solar Initiative - Multi-Family Affordable Solar Housing (MASH) Program < Back Eligibility Low-Income Residential Multi-Family Residential Savings Category Solar Buying & Making Electricity Program Info State California Program Type State Rebate Program Rebate Amount Track 1: Fully Subscribed Track 2: Closed '''''Track 2 was closed in 2011. Track 1 incentives have been fully subscribed for all three program administrators and waitlists have been established. Contact the appropriate program administrator for up to date information on the status of Track 1. ''''' The California Solar Initiative (CSI) provides financial incentives to customers in investor-owned utility (IOU) territories of Pacific Gas and

126

Connecticut State Certification of Commercial and Residential Building  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Connecticut State Certification of Commercial and Residential Building Connecticut State Certification of Commercial and Residential Building Energy Codes The purpose of this letter is to document that the State of Connecticut has met its stautory requirement with regard to adoption of energy codes that meet or exceed the 2009 International Energy Conservation Code for residential buildings and ASHRAE Standard 90.1-2007 for commercial buildings. Publication Date: Tuesday, July 16, 2013 CT Certification of Building Energy Codes.pdf Document Details Last Name: Cassidy Initials: JV Affiliation: Connecticut Department of Administrative Services, Division of Construction Services Prepared by: prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program Focus: Adoption Building Type:

127

Audit Procedures for Improving Residential Building Energy Efficiency  

E-Print Network [OSTI]

Audit Procedures for Improving Residential Building Energy Efficiency This report analyses Sustainability Program Subtask 3.5.1: Residential Energy Efficiency Deliverable 1 Prepared by The University Delivery and Energy Reliability As part of Cooperative Agreement No. DE-EE0003507 Under Task 3.5: Energy

128

Energy Audit Results for Residential Building Energy Efficiency  

E-Print Network [OSTI]

Energy Audit Results for Residential Building Energy Efficiency Forrest City Phases I and II This report analyses complete energy audit results from 28 homes within the Forest City residential complex. Relationships between temperature, humidity, comfort, and energy consumption are detailed. Recommendations

129

Building Technologies Program: Tax Incentives for Residential Buildings  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Program Program Tax Incentives for Residential Buildings On this page you'll find information about the tax deductions available for purchasing and installing energy-efficient products and constructing new energy-efficient homes. The American Recovery and Reinvestment Act of 2009 offers tax credits for residential energy efficiency measures and renewable energy systems. Many of these credits were originally introduced in the Energy Policy Act of 2005 (EPACT) and amended in the Emergency Economic Stabilization Act of 2008 (P.L. 110-343). Energy Efficiency Tax Credits for Existing Homes Homeowners are eligible for a tax credit of 30% of the cost for improvements to windows, roofing, insulation, and heating and cooling equipment. These improvements must be placed in service from January 1, 2009 through December 31, 2010 and there is a limit of $1,500 for all products. Improvements made in 2008 are not eligible for a tax credit. See the ENERGY STAR® Web site for a detailed listing of eligible improvements.

130

Winter energy behaviour in multi-family block buildings in a temperate-cold climate in Argentina  

Science Journals Connector (OSTI)

This paper analyzes the thermal and energy behaviour of apartments in three-story block buildings located along a NE-SW axis (azimuth = 120°) in a temperate-cold climate (latitude: 36°57?; longitude: 64°27?) in the city of Santa Rosa, La Pampa, central Argentina. Four apartments had been monitored during May and June 2009. Three of them are located in Block 126. Two of these apartments face South: 15 and 23 on the SE end, ground and first floor, respectively; 18 faces N on the second floor. Finally apartment, 12 is located in Block 374, on the first floor, faces N and shows a carpentry-closed balcony. The purpose of this work is – to study the evolution of the indoor temperature in each apartment; to analyze energy consumption and comfort conditions; to study energy potential and energy intervention in order to reduce energy consumption; to analyze bioclimatic alternatives feasibility and the possibility to extrapolate results to all blocks. On the basis of the analysis of natural gas historical consumption records, results showed that regarding heating energy consumption during the period May–June, Apartment 12, facing N, with its only bedroom facing NW and its carpentry-closed, transparent glass balcony, presented a mean temperature of 21.2 °C, using a halogen heater for 6 h/day between 9 pm and 2 am (0.16 kWh/day/m2). Apartment 15, on the SE end, first floor of the block consumed 22.5 kWh/day (0.43 kWh/day/m2) (mean temperature = 22.2 °C). Apartment 23, located on the second and top floor (on top of Apartment 15) with higher energy loss, consumed 28 kWh/day (0.54 kWh/day/m2) (mean temperature = 23.7 °C). Apartment 18, also on the second floor and facing N, located in the centre and with its only bedroom facing SE, consumed 18.8 kWh/day (0.48 kWh/day/m2) (mean temperature = 22.3 °C). Apartment 23, with higher thermal loss through its envelope, but with heat transfer from the apartment located below, is the one that showed the highest level of consumption/m2. Closing the balcony with carpentry produced an important reduction of energy consumption while reaching comfort conditions. The analysis of the experimental results allowed: (a) to determine through analysis of historical consumption of natural gas prior to the year 2009 that the owner lived under conditions of comfort, (b) to evaluate possible interventions in the building that would lead to saving heating energy. Thermal insulation of roof and envelope appears as the most feasible alternative whereas closing balconies constitute a very good design option in winter.

C. Filippín; S. Flores Larsen; V. Mercado

2011-01-01T23:59:59.000Z

131

Better Buildings Residential Network Membership Form  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Are You Already a DOE Partner or Sponsor? (Check if applicable) Better Buildings Alliance Member Building America Team Member Better Buildings Challenge Partner or Ally Home...

132

Tax Incentives for Residential Buildings | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Residential Buildings Residential Buildings Tax Incentives for Residential Buildings On this page you'll find information about the tax deductions available for purchasing and installing energy-efficient products and constructing new energy-efficient homes. The American Recovery and Reinvestment Act of 2009 offers tax credits for residential energy efficiency measures and renewable energy systems. Many of these credits were originally introduced in the Energy Policy Act of 2005 (EPACT) and amended in the Emergency Economic Stabilization Act of 2008 (P.L. 110-343). Energy Efficiency Tax Credits for Existing Homes Homeowners are eligible for a tax credit of 30% of the cost for improvements to windows, roofing, insulation, and heating and cooling equipment. These improvements must be placed in service from January 1,

133

DOE Buildings Performance Database, sample Residential data | OpenEI  

Open Energy Info (EERE)

Buildings Performance Database, sample Residential data Buildings Performance Database, sample Residential data Dataset Summary Description This is a non-proprietary subset of DOE's Buildings Performance Database. Buildings from the cities of Dayton, OH and Gainesville, FL areas are provided as an example of the data in full database. Sample data here is formatted as CSV The Buildings Performance Database will have an API that allows access to the statistics about the data without exposing private information about individual buildings. The data available in this sample is limited due to the nature of the original datasets; the Buildings Performance database combines data from multiple sources to improve overall robustness. Data fields stored in the database can be seen in the BPD taxonomy: http://www1.eere.energy.gov/buildings/buildingsperformance/taxonomy.html

134

Residential  

Science Journals Connector (OSTI)

The residential sector can be divided into apartment blocks and low-rise housing. Apartment blocks have many similarities to the non-domestic sector, such as office buildings, which are covered by the range of...

2009-01-01T23:59:59.000Z

135

Building energy calculator : a design tool for energy analysis of residential buildings in Developing countries  

E-Print Network [OSTI]

Buildings are one of the world's largest consumers of energy, yet measures to reduce energy consumption are often ignored during the building design process. In developing countries, enormous numbers of new residential ...

Smith, Jonathan Y. (Jonathan York), 1979-

2004-01-01T23:59:59.000Z

136

Indoor-Outdoor Air Leakage of Apartments and Commercial Buildings  

E-Print Network [OSTI]

the existing multi-family building stock in California, inand (2) multi-family residences. Commercial buildings (as we

Price, P.N.

2011-01-01T23:59:59.000Z

137

Residential Building Integration Program Overview- 2014 BTO Peer Review  

Broader source: Energy.gov [DOE]

Presenter: David Lee, U.S. Department of Energy This presentation at the 2014 Peer Review provided an overview of the Building Technologies Office's Residential Building Integration Program. Through robust feedback, the BTO Program Peer Review enhances existing efforts and improves future designs.

138

Better Buildings Residential Program Solution Center Demonstration Webinar Transcript  

Broader source: Energy.gov [DOE]

The Better Buildings Residential Program Solution Center is a robust online collection of nearly 1,000 examples, strategies, and resources from Better Buildings Neighborhood Program partners, Home Performance with ENERGY STAR® Sponsors, and others. This webinar presented on November 19, 2014 gives more information on the Solution Center.

139

BetterBuildings for Michigan: Residential Program  

Broader source: Energy.gov [DOE]

This is a document from BetterBuildings for Michigan posted on the website of the U.S. Department of Energy's Better Buildings Neighborhood Program

140

City of Portland - Streamlined Building Permits for Residential Solar  

Broader source: Energy.gov (indexed) [DOE]

Residential Residential Savings Category Solar Buying & Making Electricity Heating & Cooling Water Heating Program Info State Oregon Program Type Green Building Incentive Provider City of Portland The City of Portland's Bureau of Development Services (BDS) developed an electronic permitting process for residential solar energy system installations. With this streamlined, expedited process, solar contractors can submit the project plans and permit application online for residential installations. In order to file the online application, the contractor must first be trained. The City of Portland has staff at the permitting desk trained as solar experts to assist solar contractors who need help filing their permits in person. This process has a turnaround time of approximately 2-3 business days for building permits.

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Austin Energy - Multi-Family Energy Efficiency Rebate Program | Department  

Broader source: Energy.gov (indexed) [DOE]

Austin Energy - Multi-Family Energy Efficiency Rebate Program Austin Energy - Multi-Family Energy Efficiency Rebate Program Austin Energy - Multi-Family Energy Efficiency Rebate Program < Back Eligibility Multi-Family Residential Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Commercial Heating & Cooling Cooling Sealing Your Home Ventilation Heat Pumps Appliances & Electronics Commercial Lighting Lighting Insulation Design & Remodeling Windows, Doors, & Skylights Maximum Rebate $200,000 Program Info State Texas Program Type Utility Rebate Program Rebate Amount Split System Air Conditioning: $200 - $550 Packaged Unit Air Conditioning: $300 - $500 Split System Heat Pumps: $250 - $600 Packaged Unit Heat Pumps: $350 - $550 Solar Screens/Solar Film: $1.00 - $1.25/sq. ft. Low E Window Replacement: $2.00/sq. ft.

142

Puget Sound Energy - Multi-Family Efficiency Programs | Department of  

Broader source: Energy.gov (indexed) [DOE]

You are here You are here Home » Puget Sound Energy - Multi-Family Efficiency Programs Puget Sound Energy - Multi-Family Efficiency Programs < Back Eligibility Construction Multi-Family Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Appliances & Electronics Manufacturing Heat Pumps Commercial Lighting Lighting Water Heating Windows, Doors, & Skylights Solar Swimming Pool Heaters Program Info State District of Columbia Program Type Utility Rebate Program Rebate Amount Multi-Family Retrofit CFLs: $20/fixture or FREE LEDs: $20- $30 Windows/Sliding Glass Doors: $6 - $8/sq. ft. Insulation: $0.75/sq. ft. In-Unit Water Heater: $50/unit Clothes Washer: $50 - $100 In-Unit Refrigerator: $20 Solar Pool Heater: Not Specified

143

Ameren Illinois (Electric) - Multi-Family Properties Energy Efficiency  

Broader source: Energy.gov (indexed) [DOE]

Ameren Illinois (Electric) - Multi-Family Properties Energy Ameren Illinois (Electric) - Multi-Family Properties Energy Efficiency Rebate Program Ameren Illinois (Electric) - Multi-Family Properties Energy Efficiency Rebate Program < Back Eligibility Multi-Family Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Cooling Home Weatherization Commercial Weatherization Sealing Your Home Ventilation Manufacturing Heat Pumps Appliances & Electronics Commercial Lighting Lighting Maximum Rebate See rebate amounts listed above Program Info State Illinois Program Type Utility Rebate Program Rebate Amount '''Common Area Efficiency''' CFL's: $1.50 Modular CFL's: $23-$26 T8 Lamps: $7-$12, depending on ballast and wattage Occupancy Sensors: $25 LED Exit Sign: $22 In-Unit Efficiency Installations: CFLs, pipe insulation and water savings

144

NREL Partnerships with External Organizations (Residential Buildings Group)  

Open Energy Info (EERE)

Partnerships with External Organizations (Residential Buildings Group) Partnerships with External Organizations (Residential Buildings Group) Dataset Summary Description This spreadsheet contains a list of all the companies with which NREL's Residential Buildings Group has formed a partnership. The two types of partnership included in this spreadsheet are: Incubator and Test & Evaluation. This list was generated in April 2011. Source NREL Date Released April 07th, 2011 (3 years ago) Date Updated Unknown Keywords incubator NREL partnerships Test & Evaluation Data application/vnd.openxmlformats-officedocument.spreadsheetml.sheet icon members_and_partners_-_nrel_resbldgs_04072011.xlsx (xlsx, 29.8 KiB) Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage Frequency Time Period License License Other or unspecified, see optional comment below

145

Noise?insulation requirements for multi?family dwellings  

Science Journals Connector (OSTI)

Noise insulation standards are part of the California Administrative Code (Title 25 Section 1092). These standards apply to all new multi?family dwelling units such as hotels apartments duplexes townhouses and condominium units. Detached single?family dwellings are specifically excluded. The standards establish minimum requirements for the isolation of interior spaces from exterior noise and set minimum ratings for noise insulation of partitions between dwelling units. A community noise equivalent level (CNEL) of 45 dB is set as the maximum for intrusive noise from exterior sources such as rail or road traffic or aircraft operations. American Society for Testing and Materials (ASTM) testing procedures for party wall and floor/ceiling system sound transmission provide the basis for setting minimum acceptable performance for separations between units. As a consultant to builders planners and architects the site planning and design of residential projects have been examined and field evaluations have been performed on completed projects. Building designs and the selection of suitable building elements (wall construction composites window assemblies vent configurations etc.) which assure compliance with the standards have been identified. The paper provides a brief description of the standards their enforcement pitfalls and an assessment of their impact on residential construction in California.

John J. Van Houten

1981-01-01T23:59:59.000Z

146

Modeling of Residential Buildings and Heating Systems  

E-Print Network [OSTI]

-zone building model is used in each case. A model of the heating system is also used for the multi-storey building. Both co-heating and tracer gas measurements are used in order to adjust the parameters of each building model. A complete monitoring...

Masy, G.; Lebrun, J.

2004-01-01T23:59:59.000Z

147

Residential Buildings Integration | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Use a whole building approach for home upgrades through ENERGY STAR. Support energy efficiency upgrade markets by providing grants to states, local governments, and...

148

Lighting in Residential and Commercial Buildings (1993 and 1995 Data) --  

U.S. Energy Information Administration (EIA) Indexed Site

Commercial Buildings Home > Special Topics and Data Reports > Types of Lights Commercial Buildings Home > Special Topics and Data Reports > Types of Lights Picture of a light bulb At Home and At Work: What Types of Lights Are We Using? Two national EIA surveys report that . . . Of residential households, 98 percent use incandescent, 42 percent use fluorescent. Of commercial buildings, 59 percent use incandescent, 92 percent use fluorescent. At a glance, we might conclude that substantial energy savings could occur in both the residential and commercial sectors if they replaced their incandescent lights with fluorescent lights, given that fluorescent lights consume approximately 75-85 percent less electricity than incandescent lights. In the residential sector, this is true. However, in the commercial sector, where approximately 92 percent of the buildings already use fluorescent lights, increasing energy savings will require upgrading existing lights and lighting systems. To maximize energy savings, analysis must also consider the hours the lights are used and the amount of floorspace lit by that lighting type. Figures 1 and 2 show the types of lights used by the percent of households and by the percent of floorspace lit for the residential and the commercial sectors, respectively.

149

National Residential Efficiency Measures Database- Building America Top Innovation  

Broader source: Energy.gov [DOE]

This Building America Innovations profile describes the DOE-sponsored National Residential Efficiency Measures Database, which contains performance characteristics and cost estimates for nearly 3,000 energy retrofit measures. To date, it is used in four prominent DOE software packages to help optimize energy-efficiency recommendations.

150

Massachusetts multi-family passive solar program  

SciTech Connect (OSTI)

The Massachusetts Executive Office of Energy Resources (EOER), in cooperation with the US Department of Energy, the State Executive Office of Communities and Development, and Local Housing Authorities is putting passive solar and special energy conservation features into new multi-family housing for the elderly throughout the Commonwealth. The Multi-Family Passive Solar Program provides design and technical assistance to the housing agencies, project architects, and engineers, and uses funds from EOER's $25 million Energy Bond Program to pay for incremental conservation and solar costs. In October 1980, 17 projects including over 400 passive solar heated units received awards for design and construction totalling $1.5 million. Many of them are already under construction. The projects represent a wide range of building types (from suburban cottages to mid-rise elevator buildings) and structural systems (from light wood to steel to concrete frames), and respond to a variety of real world constraints which make them non-optimal. Solar systems include direct gain, Trombe walls, passive domestic water heating, and a variety of sunspace configurations, some using remote storage. Additional projects are now in design development, plans for monitoring are underway, and a case study book outlining our experience and recommendations for multi-family passive solar design is being drafted.

Rouse, R.E.

1981-01-01T23:59:59.000Z

151

Energy Data Sourcebook for the U.S. Residential Sector  

E-Print Network [OSTI]

multi-family buildings in the north (and electric furnace and heatMulti-Family Building Prototypes Cond. Regional Floor Heat

Wenzel, T.P.

2010-01-01T23:59:59.000Z

152

Be SMART Multi-Family Efficiency Loan Program (Maryland) | Department of  

Broader source: Energy.gov (indexed) [DOE]

Multi-Family Efficiency Loan Program (Maryland) Multi-Family Efficiency Loan Program (Maryland) Be SMART Multi-Family Efficiency Loan Program (Maryland) < Back Eligibility Multi-Family Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Sealing Your Home Cooling Construction Design & Remodeling Other Ventilation Manufacturing Heat Pumps Appliances & Electronics Commercial Lighting Lighting Water Heating Windows, Doors, & Skylights Maximum Rebate Not specified Program Info Funding Source American Recovery and Reinvestment Act (ARRA); State Energy Program State Maryland Program Type State Loan Program Rebate Amount Varies Provider Maryland Department of Housing and Community Development Note: The eligible technologies listed above are only examples of some

153

Assessing and Improving the Accuracy of Energy Analysis for Residential Buildings  

SciTech Connect (OSTI)

This report describes the National Renewable Energy Laboratory's (NREL) methodology to assess and improve the accuracy of whole-building energy analysis for residential buildings.

Polly, B.; Kruis, N.; Roberts, D.

2011-07-01T23:59:59.000Z

154

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book [EERE]

Residential Building Component Loads as of 1998 (1) 1) "Load" represents the thermal energy lossesgains that when combined will be offset by a building's heatingcooling system...

155

Impacts of the 2009 IECC for Residential Buildings at State Level - Minnesota  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Minnesota Minnesota September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN MINNESOTA BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN MINNESOTA Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Minnesota Summary The energy efficiency requirements in the Minnesota building code are based on the 2006 International Residential Code (IRC) with relatively extensive modifications. The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the 2006 IRC. The most notable

156

National Residential Efficiency Measures Database Aimed at Reducing Risk for Residential Retrofit Industry (Fact Sheet), Building America: Technical Highlight, Building Technologies Program (BTP)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Residential Residential Efficiency Measures Database Aimed at Reducing Risk for Residential Retrofit Industry Researchers at the U.S. Department of Energy (DOE) National Renewable Energy Laboratory (NREL) have developed the National Residential Efficiency Measures Database, a public database that characterizes the performance and costs of common residential energy efficiency measures. The data are available for use in software programs that evaluate cost- effective retrofit measures to improve the energy efficiency of residential buildings. This database: * Provides information in a standardized format. * Improves the technical consistency and accuracy of the results of software programs. * Enables experts and stakeholders to view the retrofit information and provide comments to improve data

157

Anaheim Public Utilities - Green Building and New Construction Rebate  

Broader source: Energy.gov (indexed) [DOE]

Anaheim Public Utilities - Green Building and New Construction Anaheim Public Utilities - Green Building and New Construction Rebate Program Anaheim Public Utilities - Green Building and New Construction Rebate Program < Back Eligibility Commercial Construction Industrial Low-Income Residential Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Sealing Your Home Heating & Cooling Commercial Heating & Cooling Cooling Construction Design & Remodeling Windows, Doors, & Skylights Ventilation Heat Pumps Appliances & Electronics Commercial Lighting Lighting Insulation Maximum Rebate Commercial Green Building: $75,000 Residential Green Building: $100,000 LEED Certification: $30,000 Green Building Rater Incentive: $6,000 Program Info State California Program Type Utility Rebate Program

158

Building America Residential Buildings Energy Efficiency Meeting: July 2010  

Broader source: Energy.gov [DOE]

On this page, you may link to the summary report and presentations for the Building America Energy Efficiency meeting in July 2011, held in Denver, Colorado.

159

Impacts of the 2009 IECC for Residential Buildings at State Level - Delaware  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Delaware Delaware September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN DELAWARE BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN DELAWARE Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Delaware Summary Delaware recently adopted the 2009 International Energy Conservation Code (IECC). The code becomes effective July 1, 2010. Overview of the 2009 IECC The IECC scope includes residential single-family housing and multifamily housing three stories or less above-

160

Impacts of the 2009 IECC for Residential Buildings at State Level - New Hampshire  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Hampshire Hampshire September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEW HAMPSHIRE BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEW HAMPSHIRE Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in New Hampshire Summary New Hampshire has adopted the 2009 International Energy Conservation Code (IECC). The code becomes effective October 1, 2009. Overview of the 2009 IECC The IECC scope includes residential single-family housing and multifamily housing three stories or less above-

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

LEED for Homes Rating System affordablemarket rate multi-family  

E-Print Network [OSTI]

LEED for Homes Rating System affordablemarket rate multi-family #12;The top 25% of new homes based% REGULATIONS lawbreakers DEGREE OF GREEN MARKET SHIFT typical building practices market leaders innovators the negative impact of buildings on their occupants and on the environment. LEED for Homes categories

Zaferatos, Nicholas C.

162

Buildings Energy Data Book: 2.6 Residential Home Improvement  

Buildings Energy Data Book [EERE]

1 1 Value of Residential Building Improvements and Repairs, by Sector ($2010 Billion) (1) Total 1980 72.2 35.2 107.4 1985 82.3 65.3 147.6 1990 91.4 85.5 176.9 1995 105.8 63.8 169.6 2000 138.2 52.7 191.0 2003 156.2 51.9 208.0 2004 169.2 57.9 227.1 2005 179.0 59.7 238.6 2006 187.4 57.2 244.6 2007 (2) 178.7 57.0 235.7 Note(s): Source(s): Improvements Maintenance and Repairs 1) Improvements includes additions, alterations, reconstruction, and major replacements. Repairs include maintenance. 2) The US Census Bureau discontinued the Survey of Residential Alterations and Repairs (SORAR) after 2007. DOC, Historic Expenditures for Residential Properties by Property Type: Quarterly 1962-2003 (Old structural purposes) for 1980-2000; DOC, Historic Expenditures for Residential Proerties by Property Type: Quarterly 2003-2007 (New structural purposes) for 1995-2007; and EIA, Annual Energy Review

163

City of Boulder - Green Points Building Program | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

City of Boulder - Green Points Building Program City of Boulder - Green Points Building Program City of Boulder - Green Points Building Program < Back Eligibility Commercial Construction Multi-Family Residential Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Other Solar Heating Buying & Making Electricity Water Heating Program Info State Colorado Program Type Building Energy Code Provider City of Boulder The Boulder Green Points Building Program is a mandatory residential green building program that requires a builder or homeowner to include a variety of sustainable building components based on the size of the proposed structure. Similar to the US Green Building Council's LEED program, the

164

Impacts of the 2009 IECC for Residential Buildings at State Level - Wisconsin  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Wisconsin Wisconsin September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN WISCONSIN BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN WISCONSIN Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Wisconsin Summary The energy efficiency requirements in the Wisconsin building code are the 2006 International Energy Conservation Code (IECC) with amendments that increase stringency. The 2009 IECC contains several major improvements in energy efficiency over the 2006 IECC and the Wisconsin code for the total building energy

165

WaterSense Program: Methodology for National Water Savings Analysis Model Indoor Residential Water Use  

E-Print Network [OSTI]

home, a unit in a multi-family building, or a mobile home.and housing units in multi-family buildings. We assumed thatHHDs) HHDs in Multi-Family Buildings HHD HHD Income Toilet

McNeil, Michael

2008-01-01T23:59:59.000Z

166

Energy Efficiency Standards for New Federal Low-Rise Residential Buildings  

Broader source: Energy.gov (indexed) [DOE]

Standards for New Federal Low-Rise Residential Standards for New Federal Low-Rise Residential Buildings Energy Efficiency Standards for New Federal Low-Rise Residential Buildings October 8, 2013 - 1:57pm Addthis DOE recently updated the requirements for energy efficiency in newly constructed federal buildings. The new rule, 10 CFR 435, Subpart A: Energy Efficiency Standards for New Federal Low-Rise Residential Buildings, applies to residential buildings (one- and two-family dwellings as well as multifamily buildings three stories or less in height) for which design for construction began on or after August 10, 2012. The rule updates the baseline standard in 10 CFR 435, Subpart A to the 2009 IECC. New federal residential buildings are required (effective August 10, 2012) to achieve the 2009 IECC level of energy efficiency or 30% greater

167

Residential Requirements of the 2009 IECC | Building Energy Codes Program  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

09 IECC 09 IECC This training includes an overview of the residential requirements of the 2009 International Energy Conservation Code. Estimated Length: 1 hour, 9 minutes Presenters: Todd Taylor, Pacific Northwest National Laboratory Original Webcast Date: Tuesday, June 16, 2009 - 13:00 CEUs Offered: 1.0 AIA/CES LU (HSW); .10 CEUs towards ICC renewal certification. Course Type: Video Downloads: Video Transcript Presentation Slides Video Watch on YouTube Visit the BECP Online Training Center for instructions on how to obtain a certificate of completion. Building Type: Residential Focus: Compliance Code Version: 2009 IECC Target Audience: Architect/Designer Builder Code Official Contractor Engineer Federal Official State Official Contacts Web Site Policies U.S. Department of Energy

168

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

7 7 Average Natural Gas Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 57.3 42.5 99.4 114 49 84.3 33 615 0.26 456 176 Census Region and Division Northeast 11.7 7.4 21.2 139 49 88.5 34 898 0.31 571 221 New England 1.7 1.0 3.0 155 49 86.8 33 1,044 0.33 586 223 Middle Atlantic 10.0 6.5 18.2 137 49 88.8 35 877 0.31 568 221

169

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

3 3 Average Natural Gas Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 58.7 46.0 111.9 115 47 89.9 34 696 0.29 546 206 Census Region and Division Northeast 12.2 7.7 23.3 145 48 90.9 35 1,122 0.37 703 272 New England 2.2 1.2 4.2 154 45 85.7 34 1,298 0.38 722 290 Middle Atlantic 10.0 6.4 19.1 143 48 92.0 35 1,089 0.37 699 269

170

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

4 4 Average Electricity Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total 86.3 67.4 144.3 37 17 28.8 11 808 0.38 632 234 Census Region and Division Northeast 18.3 13.0 35.0 31 12 22.3 8 938 0.35 665 245 New England 4.3 3.1 9.0 31 11 22.6 8 869 0.30 635 227 Middle Atlantic 14.0 9.9 26.0 32 12 22.2 8 959 0.36 674 251

171

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

Fuel Oil/Kerosene, 2001 Fuel Oil/Kerosene, 2001 Average Fuel Oil/Kerosene Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 11.2 9.4 26.0 80 29 67.1 26 723 0.26 607 236 Census Region and Division Northeast 7.1 5.4 16.8 111 36 84.7 33 992 0.32 757 297 New England 2.9 2.5 8.0 110 35 96.3 39 1,001 0.32 875 350 Middle Atlantic 4.2 2.8 8.8 112 36 76.6 30 984 0.32 675 260

172

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

0 0 Average Natural Gas Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 57.7 44.8 106.3 109 46 84.2 32 609 0.26 472 181 Census Region and Division Northeast 11.9 7.7 23.6 134 44 86.8 33 952 0.31 615 232 New England 2.0 1.1 3.5 146 45 76.0 29 1,135 0.35 592 227 Middle Atlantic 9.9 6.6 20.1 133 44 89.1 34 923 0.30 620 234

173

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

4 4 Average Natural Gas Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 55.4 41.3 93.2 121 53 89.9 33 722 0.32 537 198 Census Region and Division Northeast 11.7 7.5 21.1 125 44 79.2 30 925 0.33 588 221 New England 2.0 1.3 4.2 122 39 80.3 29 955 0.30 626 224 Middle Atlantic 9.7 6.1 16.9 125 45 78.9 30 919 0.33 580 220

174

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

1 1 Average LPG Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 7.3 7.2 12.2 44 26 42.8 15 389 0.23 382 133 Census Region and Division Northeast 1.2 1.1 2.7 29 11 26.2 9 318 0.13 288 94 New England 0.5 0.4 1.0 25 11 22.5 8 282 0.12 250 91 Middle Atlantic 0.7 0.7 1.7 31 12 28.6 9 341 0.13 312 96

175

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

7 7 Average Fuel Oil/Kerosene Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 17.4 14.0 33.3 87 37 70.3 27 513 0.22 414 156 Census Region and Division Northeast 9.1 6.3 17.8 140 49 96.0 37 808 0.28 556 212 New England 2.6 2.0 5.8 130 46 102.1 39 770 0.27 604 233 Middle Atlantic 6.5 4.2 12.1 144 51 93.6 36 826 0.29 537 204

176

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

7 7 Average Electricity Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total 90.5 70.4 156.8 39 18 30.5 12 875 0.39 680 262 Census Region and Division Northeast 19.0 13.2 36.8 34 12 23.3 9 934 0.34 648 251 New England 4.3 3.0 8.4 33 12 22.9 9 864 0.30 600 234 Middle Atlantic 14.8 10.2 28.4 34 12 23.4 9 954 0.34 661 256

177

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

2001 2001 Average Electricity Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total 107.0 85.2 211.2 46 18 36.0 14 1,178 0.48 938 366 Census Region and Division Northeast 20.3 14.1 43.7 37 12 26.0 11 1,268 0.41 883 362 New England 5.4 4.1 13.2 32 10 24.0 10 1,121 0.35 852 358 Middle Atlantic 14.8 10.0 30.5 40 13 27.0 11 1,328 0.44 894 364

178

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

4 4 Average LPG Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 7.8 7.7 12.0 41 26 40.1 15 406 0.26 398 146 Census Region and Division Northeast 1.4 1.2 2.7 23 10 20.1 7 295 0.13 264 91 New England 0.5 0.4 1.0 31 14 27.6 9 370 0.17 330 114 Middle Atlantic 0.9 0.8 1.8 18 8 15.9 6 253 0.11 226 79

179

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

90 90 Average Fuel Oil/Kerosene Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 16.3 13.5 33.2 77 31 63.9 23 609 0.25 506 181 Census Region and Division Northeast 8.9 6.4 19.3 121 40 87.7 32 950 0.32 690 253 New England 2.5 2.1 5.9 121 43 99.0 39 956 0.34 784 307 Middle Atlantic 6.3 4.4 13.4 121 39 83.2 30 947 0.31 652 234

180

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

97 97 Average Electricity Residential Buildings Consumption Expenditures Total per Floor- per Square per per per Total Total space (1) Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total 101.4 83.2 168.8 42 21 35.0 13 1,061 0.52 871 337 Census Region and Division Northeast 19.7 15.1 34.6 32 14 25.0 10 1,130 0.49 863 345 New England 5.3 4.2 9.3 31 14 24.0 9 1,081 0.49 854 336 Middle Atlantic 14.4 10.9 25.3 33 14 25.0 10 1,149 0.49 867 349

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

1 1 Average Fuel Oil/Kerosene Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 14.6 11.0 28.9 116 44 87.9 32 1,032 0.39 781 283 Census Region and Division Northeast 8.9 5.9 18.0 158 51 103.5 36 1,405 0.46 923 323 New England 2.4 1.7 5.1 148 50 105.3 36 1,332 0.45 946 327 Middle Atlantic 6.5 4.1 12.8 161 52 102.9 36 1,435 0.46 915 322

182

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

0 0 Average Fuel Oil/Kerosene Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 15.4 11.6 29.7 131 51 99.0 36 1,053 0.41 795 287 Census Region and Division Northeast 9.2 6.0 18.2 176 59 116.2 42 1,419 0.47 934 335 New England 2.7 2.0 6.0 161 53 118.3 42 1,297 0.43 954 336 Middle Atlantic 6.5 4.1 12.2 184 61 115.3 42 1,478 0.49 926 335

183

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

1 1 Average Electricity Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total 83.1 66.1 144.2 37 17 29.1 10 678 0.31 539 192 Census Region and Division Northeast 17.9 12.1 35.1 33 11 22.1 8 830 0.29 561 195 New England 4.3 2.9 8.3 31 11 21.3 8 776 0.27 531 189 Middle Atlantic 13.7 9.2 26.7 33 11 22.4 8 847 0.29 571 197

184

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

Natural Gas, 1997 Natural Gas, 1997 Average Natural Gas Residential Buildings Consumption Expenditures Total per Floor- per Square per per per Total Total space (1) Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 61.9 51.3 106.1 103 50 85.3 32 698 0.34 579 218 Census Region and Division Northeast 11.8 8.3 19.9 123 52 86.9 35 1,097 0.46 772 310 New England 1.9 1.4 3.3 123 50 87.0 32 1,158 0.48 819 301 Middle Atlantic 9.9 6.9 16.6 124 52 86.9 36 1,085 0.45 763 312

185

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

3 3 Average Electricity Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 96.6 76.4 181.2 43 18 34.0 13 1,061 0.45 840 321 Census Region and Division Northeast 19.5 13.8 40.1 34 12 24.1 9 1,144 0.39 809 309 New England 5.1 3.7 10.6 33 11 24.1 9 1,089 0.38 797 311 Middle Atlantic 14.4 10.1 29.4 35 12 24.2 9 1,165 0.40 814 309

186

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

7 7 Average Fuel Oil/Kerosene Residential Buildings Consumption Expenditures Total per Floor- per Square per per per Total Total space (1) Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 13.2 11.0 23.2 97 46 81.1 31 694 0.33 578 224 Census Region and Division Northeast 8.2 6.2 14.5 136 57 101.3 40 950 0.40 710 282 New England 3.1 2.7 5.8 126 60 111.5 45 902 0.43 797 321 Middle Atlantic 5.2 3.4 8.8 143 56 95.1 38 988 0.39 657 260

187

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

3 3 Average Fuel Oil/Kerosene Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 13.8 11.6 29.8 92 36 77.5 28 604 0.23 506 186 Census Region and Division Northeast 7.9 5.9 17.2 133 45 98.7 36 854 0.29 636 234 New England 2.8 2.4 6.6 125 45 105.6 40 819 0.30 691 262 Middle Atlantic 5.0 3.5 10.6 138 45 94.8 34 878 0.29 605 219

188

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

0 0 Average Electricity Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total 81.6 65.3 142.5 38 17 30.3 11 625 0.29 500 178 Census Region and Division Northeast 17.7 12.2 34.8 33 12 23.0 8 742 0.26 514 181 New England 4.3 2.9 8.9 34 11 23.1 8 747 0.25 508 177 Middle Atlantic 13.4 9.3 26.0 33 12 22.9 8 740 0.27 516 183

189

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

2001 2001 Average Natural Gas Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 66.9 53.8 137.2 90 35 72.4 27 873 0.34 702 265 Census Region and Division Northeast 12.5 7.8 25.4 126 39 78.3 33 1,434 0.44 889 372 New England 2.3 1.5 5.5 128 34 82.5 35 1,567 0.42 1,014 428 Middle Atlantic 10.3 6.3 19.9 126 40 77.4 32 1,403 0.45 861 360

190

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

4 4 Average Fuel Oil/Kerosene Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 17.5 13.8 32.0 91 39 71.9 27 697 0.30 550 203 Census Region and Division Northeast 9.5 6.6 18.2 141 51 97.3 35 1,066 0.38 734 266 New England 2.5 1.9 5.6 140 49 108.8 39 1,105 0.38 856 306 Middle Atlantic 7.0 4.6 12.6 142 52 93.2 34 1,050 0.38 690 252

191

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

Natural Gas, 1980 Natural Gas, 1980 Average Natural Gas Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 51.6 39.7 88.5 125 56 96.2 34 497 0.22 383 137 Census Region and Division Northeast 10.9 6.5 18.8 144 50 86.6 31 771 0.27 463 168 New England 1.9 0.9 3.1 162 47 78.9 28 971 0.28 472 169 Middle Atlantic 9.0 5.6 15.7 141 51 88.1 32 739 0.27 461 168

192

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

2001 2001 Average LPG Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 9.4 9.2 19.6 41 19 40.2 16 607 0.29 598 231 Census Region and Division Northeast 1.7 1.7 4.5 31 11 29.8 11 538 0.20 519 186 New England 0.7 0.7 2.2 34 11 33.1 12 580 0.19 569 209 Middle Atlantic 1.0 0.9 2.4 29 11 27.4 10 506 0.20 482 169

193

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

2 2 Average Natural Gas Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 54.2 41.0 91.8 116 52 87.6 32 658 0.29 498 183 Census Region and Division Northeast 11.6 7.3 21.1 132 46 82.6 31 951 0.33 598 221 New England 2.0 1.3 4.5 126 35 77.9 28 1,062 0.30 658 235 Middle Atlantic 9.6 6.0 16.5 133 49 83.6 31 928 0.34 585 217

194

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

2 2 Average Fuel Oil/Kerosene Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 15.5 12.2 30.0 98 40 77.1 27 829 0.34 650 231 Census Region and Division Northeast 8.8 6.0 17.4 138 48 94.5 34 1,163 0.40 796 283 New England 2.5 1.9 5.9 131 43 101.9 36 1,106 0.36 863 309 Middle Atlantic 6.3 4.1 11.5 142 50 91.5 32 1,191 0.42 769 272

195

Multi-Family Housing Loans and Grants  

Broader source: Energy.gov [DOE]

Multi-family housing programs offer rural rental housing loans to provide affordable multi-family rental housing for very low-, low-, and moderate-income families, the elderly, and persons with...

196

Residential  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Water Heaters Showerheads Residential Weatherization Performance Tested Comfort Systems Ductless Heat Pumps New Construction Residential Marketing Toolkit Retail Sales...

197

Window-Related Energy Consumption in the US Residential and Commercial Building Stock  

E-Print Network [OSTI]

2001). "Residential Energy Consumption Survey." 2006, fromCommercial Building Energy Consumption Survey." from http://Scale window-related energy consumption to account for new

Apte, Joshua; Arasteh, Dariush

2008-01-01T23:59:59.000Z

198

Building Energy Code | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Building Energy Code Building Energy Code Building Energy Code < Back Eligibility Commercial Multi-Family Residential Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Program Info State Ohio Program Type Building Energy Code Provider Ohio Department of Commerce ''Much of the information presented in this summary is drawn from the U.S. Department of Energy's (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more detailed information about building energy codes, visit the [http://www.energycodes.gov/states/ DOE] and [http://bcap-ocean.org/ BCAP] websites.'' The Board of Building Standards is the primary state agency that protects

199

Building Energy-Efficiency Best Practice Policies and Policy Packages  

E-Print Network [OSTI]

family buildings and multi-family buildings three stories orhotels, and multi-family buildings of four or more stories.for single- and multi-family buildings to accelerate the

Levine, Mark

2014-01-01T23:59:59.000Z

200

Impacts of the 2009 IECC for Residential Buildings at State Level - Rhode Island  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Rhode Island Rhode Island September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN RHODE ISLAND BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN RHODE ISLAND Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Rhode Island Summary Rhode Island has adopted the 2009 International Energy Conservation Code (IECC). Overview of the 2009 IECC The IECC scope includes residential single-family housing and multifamily housing three stories or less above- grade intended for permanent living (hotel/motel is not "residential"). The code applies to new buildings and

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Impacts of the 2009 IECC for Residential Buildings at State Level - Illinois  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Illinois Illinois September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN ILLINOIS BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN ILLINOIS Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Illinois Summary Illinois recently adopted the 2009 International Energy Conservation Code (IECC). Overview of the 2009 IECC The IECC scope includes residential single-family housing and multifamily housing three stories or less above- grade intended for permanent living (hotel/motel is not "residential"). The code applies to new buildings and

202

Impacts of the 2009 IECC for Residential Buildings at State Level - Michigan  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Michigan Michigan September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN MICHIGAN BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN MICHIGAN Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Michigan Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2003 IRC with considerable amendments. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in

203

Impacts of the 2009 IECC for Residential Buildings at State Level - Missouri  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Missouri Missouri September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN MISSOURI BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN MISSOURI Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Missouri Summary Missouri currently does not have a mandatory energy efficiency code. The 2009 International Energy Conservation Code (IECC) would substantially improve energy efficiency in Missouri homes. A limited analysis of the impact of the 2009 IECC resulted in estimated savings of $353 to $565 a year for an average

204

Impacts of the 2009 IECC for Residential Buildings at State Level - Texas  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Texas Texas September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN TEXAS BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN TEXAS Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Texas Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2001 IECC Supplement. The most notable changes are improved duct sealing and efficient lighting requirements. An energy analysis comparing the 2009 IECC to the state code

205

Impacts of the 2009 IECC for Residential Buildings at State Level - Nebraska  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Nebraska Nebraska September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEBRASKA BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEBRASKA Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Nebraska Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2003 IECC. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in estimated savings of $236 a year

206

Impacts of the 2009 IECC for Residential Buildings at State Level - Utah  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Utah Utah September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN UTAH BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN UTAH Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Utah Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2006 IECC. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in estimated savings of $219 to

207

Impacts of the 2009 IECC for Residential Buildings at State Level - Oklahoma  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Oklahoma Oklahoma September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN OKLAHOMA BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN OKLAHOMA Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Oklahoma Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2003 IECC. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in estimated savings of $266 to

208

Impacts of the 2009 IECC for Residential Buildings at State Level - Tennessee  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Tennessee Tennessee September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN TENNESSEE BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN TENNESSEE Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Tennessee Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2003 IECC. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in estimated savings of $231 to

209

Impacts of the 2009 IECC for Residential Buildings at State Level - Mississippi  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mississippi Mississippi September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN MISSISSIPPI BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN MISSISSIPPI Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Mississippi Summary Mississippi currently does not have a mandatory energy efficiency code. The 2009 International Energy Conservation Code (IECC) would substantially improve energy efficiency in Mississippi homes. A limited analysis of the impact of the 2009 IECC resulted in estimated savings of $173 to $250 a year for an average

210

Impacts of the 2009 IECC for Residential Buildings at State Level - Nevada  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Nevada Nevada September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEVADA BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEVADA Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Nevada Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2006 IECC. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in estimated savings of $205 to

211

Impacts of the 2009 IECC for Residential Buildings at State Level - Virginia  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Virginia Virginia September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN VIRGINIA BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN VIRGINIA Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Virginia Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2006 IRC and IECC. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in estimated savings of

212

Impacts of the 2009 IECC for Residential Buildings at State Level - New York  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

York York September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEW YORK BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEW YORK Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in New York Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2004 IECC Supplement with amendments. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in

213

Impacts of the 2009 IECC for Residential Buildings at State Level - New Jersey  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Jersey Jersey September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEW JERSEY BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEW JERSEY Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in New Jersey Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2006 IECC with extensive amendments. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in

214

Impacts of the 2009 IECC for Residential Buildings at State Level - Alaska  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Alaska Alaska September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN ALASKA BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN ALASKA Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Alaska Summary The 2009 International Energy Conservation Code (IECC) contains several improvements in energy efficiency over the current state code, the 2006 IECC with amendments. The most notable changes are improved duct sealing and efficient lighting requirements. A comparison of the overall impacts on energy use for these two

215

Impacts of the 2009 IECC for Residential Buildings at State Level - Iowa  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Iowa Iowa September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN IOWA BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN IOWA Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Iowa Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2006 IECC. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in estimated savings of $245 to

216

Energy Provisions of the California Green Building Standards Code Page 2 CHAPTER 4, RESIDENTIAL MANDATORY MEASURES  

E-Print Network [OSTI]

MANDATORY MEASURES CHAPTER 4 RESIDENTIAL MANDATORY MEASURES DIVISION 4.2 ­ ENERGY EFFFICIENCY SECTION 4 RESIDENTIAL VOLUNTARY MEASURES DIVISION A4.2 ­ ENERGY EFFFICIENCY SECTION A4.201 GENERAL A4.201.1 ScopeEnergy Provisions of the California Green Building Standards Code Page 2 CHAPTER 4, RESIDENTIAL

217

Building Energy Software Tools Directory: Building Performance Compass  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Building Performance Compass Building Performance Compass Building Performance Compass logo Building Performance Compass analyzes commercial and multi-family building energy use patterns in a simple, easy-to-use Web-based interface. Using building details and energy data from the building’s utility bills, it is unique in its ability to benchmark and compare all buildings, whether residential or commercial. Recent enhancements to Building Performance Compass include new multi-family support, the ability to track non-energy quantities such as water and waste, and features such as its fast-feedback report, which enables reporting energy savings as early as one month after work is completed. Building Performance Compass also provides extensive tracking of building data and usage, as well as the ability to upload and track

218

Energy Use and Indoor Thermal Environment of Residential Buildings in China  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Energy Use and Indoor Thermal Environment of Residential Buildings in China Energy Use and Indoor Thermal Environment of Residential Buildings in China Speaker(s): Hiroshi Yoshino Date: December 16, 2003 - 12:00pm Location: 90-3122 The first part of this talk will deal with the project on Energy Consumption and Indoor Environment Problems of Residential Buildings in China, organized by the Architectural Institute of Japan. Prof. Yoshino will discuss the results of project elements, including: 1) Literature survey and field investigation on energy consumption and indoor environment of residential buildings, 2) Compilation of weather data for building design based on observed data in China, 3) Literature survey and field investigation on energy consumption and indoor environment of residential buildings, 4) Estimation and verification of the effects of various

219

City of Cincinnati - Property Tax Abatement for Green Buildings |  

Broader source: Energy.gov (indexed) [DOE]

City of Cincinnati - Property Tax Abatement for Green Buildings City of Cincinnati - Property Tax Abatement for Green Buildings City of Cincinnati - Property Tax Abatement for Green Buildings < Back Eligibility Commercial Industrial Multi-Family Residential Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Solar Lighting Windows, Doors, & Skylights Heating Buying & Making Electricity Water Heating Wind Maximum Rebate For buildings with permits received on or before January 31, 2013: $562,792 maximum improved market value for residential buildings except no limitation with LEED Platinum certification (the maximum incentive increases by 3% every year) For buildings with permits received after January 31, 2013:

220

Al Azhar International Conference, Cairo 2008 Environmental healthy requirements in residential buildings: Amman as a case study  

E-Print Network [OSTI]

in residential buildings: Amman as a case study Environmental healthy requirements in residential buildings in the Jordanian residential buildings, in general, and in Amman particularly, considering the healthy problems requested for a healthy environment in the modern buildings, especially regarding the natural aeration

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

AB 758 COMPREHENSIVE ENERGY EFFICIENCY PROGRAM FOR EXISTING RESIDENTIAL AND NONRESIDENTIAL BUILDINGS  

E-Print Network [OSTI]

1 AB 758 COMPREHENSIVE ENERGY EFFICIENCY PROGRAM FOR EXISTING RESIDENTIAL AND NONRESIDENTIAL homes energy efficient through Title 24 Part 6 Building Energy Efficiency Standards (Standards for Energy Efficiency in Existing Buildings (AB 549 Report), the Energy Commission made a series

222

Use-phase memory: a tool for the sustainable construction and renovation of residential buildings  

E-Print Network [OSTI]

). The statistics show that this sector consumes and pollutes more than industry (22% energy) or transport sectors1 Use-phase memory: a tool for the sustainable construction and renovation of residential buildings in the variability of the energy consumption and environmental impact of residential buildings during their use

Paris-Sud XI, Université de

223

Buildings Energy Data Book: 2.4 Residential Environmental Data  

Buildings Energy Data Book [EERE]

1 1 Carbon Dioxide Emissions for U.S. Residential Buildings, by Year (Million Metric Tons) (1) Residential U.S. Site Res.% Res.% Fossil Electricity Total Total of Total U.S. of Total Global 1980 385 525 909 4723 19% 4.9% 1981 361 518 878 4601 19% 4.8% 1982 359 511 870 4357 20% 4.8% 1983 340 525 865 4332 20% 4.7% 1984 349 535 883 4561 19% 4.6% 1985 351 549 901 4559 20% 4.6% 1986 343 551 894 4564 20% 4.5% 1987 346 574 920 4714 20% 4.5% 1988 367 603 970 4939 20% 4.6% 1989 374 606 980 4983 20% 4.6% 1990 340 624 963 5039 19% 4.5% 1991 347 633 980 4996 20% 4.6% 1992 357 624 981 5093 19% 4.6% 1993 372 667 1040 5185 20% 4.8% 1994 364 668 1032 5258 20% 4.7% 1995 361 678 1039 5314 20% 4.7% 1996 389 710 1099 5501 20% 4.9% 1997 371 719 1090 5575 20% 4.7% 1998 339 759 1097 5622 20% 4.8% 1999 360 762 1122 5682 20% 4.8% 2000 380 805 1185 5867 20% 5.0% 2001 367 805 1172 5759 20% 4.9% 2002 368 835 1204 5809 21% 4.9% 2003 383 847 1230

224

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

2001 2001 Average of Major Energy Sources Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 107.0 85.2 211.3 116 47 92.2 36 1,875 0.76 1,493 583 Census Region and Division Northeast 20.3 14.1 43.7 153 49 106.6 44 2,501 0.81 1,741 715 New England 5.4 4.1 13.2 152 47 115.3 48 2,403 0.75 1,825 768 Middle Atlantic 14.8 10.0 30.5 154 50 103.4 42 2,541 0.83 1,710 696

225

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

3 3 Average of Major Energy Sources Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 96.6 76.5 181.2 131 55 103.6 40 1,620 0.68 1,282 491 Census Region and Division Northeast 19.5 13.8 40.1 173 60 122.4 47 2,157 0.74 1,526 583 New England 5.1 3.7 10.6 168 59 123.1 48 2,094 0.73 1,532 598 Middle Atlantic 14.4 10.1 29.4 175 60 122.1 46 2,180 0.75 1,523 578

226

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

4 4 Average of Major Energy Sources Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 86.3 67.5 144.4 134 63 104.7 39 1,437 0.67 1,123 417 Census Region and Division Northeast 18.3 13.0 35.0 176 65 125.2 46 2,033 0.75 1,443 533 New England 4.3 3.1 9.0 174 61 127.6 46 2,010 0.70 1,471 527 Middle Atlantic 14.0 9.9 26.0 177 67 124.5 46 2,040 0.77 1,435 535

227

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

7 7 Average of Major Energy Sources Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 90.5 70.4 156.8 130 58 100.8 39 1,388 0.62 1,080 416 Census Region and Division Northeast 19.0 13.2 36.8 179 64 124.4 48 1,836 0.66 1,276 494 New England 4.3 3.0 8.4 174 61 121.0 47 1,753 0.62 1,222 475 Middle Atlantic 14.8 10.3 28.4 181 65 125.4 48 1,860 0.67 1,292 499

228

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

1 1 Average of Major Energy Sources Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (millionBtu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 83.1 66.1 144.2 141 64 111.7 40 1,256 0.58 998 356 Census Region and Division Northeast 17.9 12.1 35.1 194 67 131.6 46 2,016 0.70 1,365 475 New England 4.3 2.9 8.3 181 63 123.9 44 2,018 0.71 1,384 492 Middle Atlantic 13.7 9.2 26.7 199 68 134.0 46 2,016 0.69 1,359 470

229

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

0 0 Average of Major Energy Sources Residential Buildings Consumption Expenditures Total per per per per Total Total Floorspace per Square per Household per Square per Household Households Number (billion Building Foot Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) (million Btu) (thousand Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 81.6 65.4 142.5 143 65 114.1 41 1,156 0.53 926 330 Census Region and Division Northeast 17.7 12.3 34.8 199 70 138.3 49 1,874 0.66 1,301 459 New England 4.3 2.9 8.9 197 65 134.4 47 1,964 0.65 1,341 466 Middle Atlantic 13.4 9.3 26.0 200 72 139.5 49 1,846 0.66 1,288 456

230

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

0 0 Average Electricity Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 94.0 74.2 169.2 124 54 98.1 38 1,485 0.65 1,172 450 Census Region and Division Northeast 19.2 13.9 40.3 165 57 119.6 45 2,034 0.70 1,471 556 New England 4.5 3.2 9.3 164 56 113.9 45 2,023 0.69 1,408 562 Middle Atlantic 14.7 10.7 31.1 166 57 121.3 45 2,037 0.70 1,491 555

231

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

2 2 Average of Major Energy Sources Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 83.8 66.1 142.2 130 60 102.3 37 1,309 0.61 1,033 377 Census Region and Division Northeast 18.0 12.5 34.4 175 64 121.7 44 1,942 0.71 1,353 490 New England 4.2 3.0 9.1 173 56 121.9 43 1,991 0.65 1,402 498 Middle Atlantic 13.7 9.5 25.2 175 66 121.7 44 1,926 0.73 1,338 487

232

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

0 0 Average of Major Energy Sources Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 94.0 74.2 169.2 124 54 98.1 38 1,485 0.65 1,172 450 Census Region and Division Northeast 19.2 13.9 40.3 165 57 119.6 45 2,038 0.70 1,471 556 New England 4.5 3.2 9.3 164 56 113.9 45 2,028 0.69 1,408 562 Middle Atlantic 14.7 10.7 31.1 166 57 121.3 45 2,041 0.70 1,491 555

233

Residential Buildings Historical Publications reports, data and housing  

Gasoline and Diesel Fuel Update (EIA)

7 7 Average of Major Energy Sources Residential Buildings Consumption Expenditures Total per Floor- per Square per per per Total Total space(2) Building Foot per Household per Square per Household Households Number (billion (million (thousand Household Member Building Foot Household Member Characteristics (million) (million) sq. ft.) Btu) Btu) (million Btu) (million Btu) (dollars) (dollars) (dollars) (dollars) Total U.S. Households 101.5 83.2 168.8 123 61 101.0 39 1,633 0.80 1,338 517 Census Region and Division Northeast 19.7 15.1 34.6 158 69 121.0 48 2,153 0.94 1,644 658 New England 5.3 4.2 9.3 156 70 123.0 48 2,085 0.94 1,647 648 Middle Atlantic 14.4 10.9 25.3 159 68 120.0 48 2,179 0.94 1,643 662

234

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book [EERE]

4 4 Cost of a Generic Quad Used in the Residential Sector ($2010 Billion) (1) Residential 1980 10.45 1981 11.20 1982 11.58 1983 11.85 1984 11.65 1985 11.43 1986 10.90 1987 10.55 1988 10.18 1989 9.98 1990 10.12 1991 9.94 1992 9.78 1993 9.77 1994 9.78 1995 9.44 1996 9.44 1997 9.59 1998 9.23 1999 8.97 2000 9.57 2001 10.24 2002 9.33 2003 10.00 2004 10.32 2005 11.10 2006 11.60 2007 11.61 2008 12.29 2009 11.65 2010 9.98 2011 9.99 2012 9.87 2013 9.77 2014 9.76 2015 9.88 2016 9.85 2017 9.83 2018 9.86 2019 9.88 2020 9.91 2021 10.00 2022 10.09 2023 10.11 2024 10.12 2025 10.09 2026 10.10 2027 10.13 2028 10.11 2029 10.06 2030 10.06 2031 10.13 2032 10.23 2033 10.34 2034 10.45 2035 10.57 Note(s): 1) See Table 1.5.1 for generic quad definition. This table provides the consumer cost of a generic quad in the buildings sector. Use this table to estimate the average consumer cost savings resulting from the savings of a generic (primary) quad in the buildings sector. 2) Price of

235

EA-1872: Energy Efficiency and Sustainable Design Standards for New Federal Buildings  

Broader source: Energy.gov [DOE]

This EA evaluated the environmental impacts of a proposal to amend the current rule for commercial and high-rise multi-family residential buildings, 10 CFR 433 “Energy Efficiency Standards for New Federal Commercial and High-Rise Multi-Family Residential Buildings,” to replace ASHRAE Standard 90.1-2004 with the more stringent ASHRAE Standard 90.1-2007, incorporated by reference. This EA also evaluated the environmental impacts with regard to low-rise residential buildings; this rulemaking updated 10 CFR 435 Subpart A, “Energy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings,” to replace the International Energy Conservation Code (IECC) 2004 with the more stringent IECC 2009, incorporated by reference. This EA was completed as DOE/EA-1871.

236

City of Scottsdale - Green Building Incentives | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Scottsdale - Green Building Incentives Scottsdale - Green Building Incentives City of Scottsdale - Green Building Incentives < Back Eligibility Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Construction Design & Remodeling Other Sealing Your Home Ventilation Manufacturing Heat Pumps Appliances & Electronics Commercial Lighting Lighting Insulation Water Heating Solar Windows, Doors, & Skylights Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Program Info State Arizona Program Type Green Building Incentive Provider City of Scottsdale Scottsdale's Green Building Program, established in 1998, was the first such program in Arizona with an emphasis on residential home construction.

237

Use-phase memory: A tool for the sustainable construction and renovation of residential buildings  

Science Journals Connector (OSTI)

Abstract Residents' usages and behavior play a determining role in the variability of the energy consumption and environmental impact of residential buildings during their use-phase. At present, however, they are inadequately documented and understood, as well as being highly variable. In this paper, we propose a use-phase memory model for residential buildings, whose aim is to store energy consumption and usage patterns. This storage can be done automatically or voluntarily. We give examples of useful information extracted from the data captured. The objective of this data analysis and synthesis is to provide building experts two specific use-cases: designing a new sustainable building, and renovating an existing one. Our model is deployed on a residential building, integrating the beneficial services for all stakeholders to demonstrate a sustainable relationship between designers, the residential building and the users.

Lucile Picon; Bernard Yannou; Toufic Zaraket; Stéphanie Minel; Gwenola Bertoluci; François Cluzel; Romain Farel

2013-01-01T23:59:59.000Z

238

Buildings Energy Data Book: 2.4 Residential Environmental Data  

Buildings Energy Data Book [EERE]

7 7 2009 Methane Emissions for U.S. Residential Buildings Energy Production, by Fuel Type Fuel Type Petroleum 1.0 Natural Gas 38.8 Coal 0.0 Wood 2.6 Electricity (2) 51.6 Total 94.0 Note(s): Source(s): MMT CO2 Equivalent (1) 1) Sources of emissions include oil and gas production, processing, and distribution; coal mining; and utility and site combustion. Carbon Dioxide equivalent units are calculated by converting methane emissions to carbon dioxide emissions (methane's global warming potential is 23 times that of carbon dioxide). 2) Emissions of electricity generators attributable to the buildings sector. EIA, Emissions of Greenhouse Gases in the U.S. 2009, Mar. 2011, Table 18, p. 37 for energy production emissions; EPA, Inventory of U.S. Greenhouse Gas Emissions and Sinks: 1990-2009, April 2011, Table 3-10, p. 3-9 for stationary combustion emissions; and EIA, Annual Energy Outlook 2012 Early Release,

239

ConEd (Gas) - Multi-family Energy Efficiency Incentives Program |  

Broader source: Energy.gov (indexed) [DOE]

ConEd (Gas) - Multi-family Energy Efficiency Incentives Program ConEd (Gas) - Multi-family Energy Efficiency Incentives Program ConEd (Gas) - Multi-family Energy Efficiency Incentives Program < Back Eligibility Multi-Family Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Sealing Your Home Ventilation Construction Manufacturing Appliances & Electronics Water Heating Maximum Rebate Steam Boiler: $2500 Energy Management System: 70% of total cost Program Info Expiration Date 12/31/2015 State New York Program Type Utility Rebate Program Rebate Amount Hot Water Gas Boilers (85%-89% TE): $1000-$3500/boiler Hot Water Gas Condensing Boilers (90%+ TE): $2000-$15,000/boiler Gas Steam Boilers: $700/boiler (300 MBH) Heating System Clean and Tune: $225/boiler

240

Summary of Gaps and Barriers for Implementing Residential Building Energy Efficiency Strategies  

Broader source: Energy.gov [DOE]

This report presents the key gaps and barriers to implementing residential energy efficiency strategies in the U.S. market, as identified in sessions at the U.S. Department of Energy's Building America 2010 Residential Energy Efficiency Meeting held in Denver, Colorado, on July 20-22, 2010.

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

City of Indianapolis - Green Building Incentive Program | Department of  

Broader source: Energy.gov (indexed) [DOE]

Indianapolis - Green Building Incentive Program Indianapolis - Green Building Incentive Program City of Indianapolis - Green Building Incentive Program < Back Eligibility Agricultural Commercial Construction Fed. Government Industrial Institutional Local Government Low-Income Residential Multi-Family Residential Nonprofit Residential Schools State Government Savings Category Heating & Cooling Commercial Heating & Cooling Heating Cooling Appliances & Electronics Home Weatherization Construction Commercial Weatherization Design & Remodeling Heat Pumps Commercial Lighting Lighting Water Heating Solar Buying & Making Electricity Wind Program Info Start Date 08/01/2010 State Indiana Program Type Green Building Incentive Provider City of Indianapolis The Indianapolis Office of Sustainability and the Department of Code

242

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book [EERE]

1 1 Type (1) Single-Family: 55.4 106.6 39.4 80.5% Detached 55.0 108.4 39.8 73.9% Attached 60.5 89.3 36.1 6.6% Multi-Family: 78.3 64.1 29.7 14.9% 2 to 4 units 94.3 85.0 35.2 6.3% 5 or more units 69.8 54.4 26.7 8.6% Mobile Homes 74.6 70.4 28.5 4.6% All Housing Types 58.7 95.0 37.0 100% Note(s): Source(s): 1) Energy consumption per square foot was calculated using estimates of average heated floor space per household. According to the 2005 Residential Energy Consumption Survey (RECS), the average heated floor space per household in the U.S. was 1,618 square feet. Average total floor space, which includes garages, attics and unfinished basements, equaled 2,309 square feet. EIA, 2005 Residential Energy Consumption Survey, Oct. 2008. 2005 Residential Delivered Energy Consumption Intensities, by Housing Type

243

Building America Expert Meeting: Summary for Diagnostic and Performance Feedback for Residential Space Conditioning System Equipment  

Broader source: Energy.gov [DOE]

The Building Science Consortium held an Expert Meeting on Diagnostic and Performance Feedback for Residential Space Conditioning System Equipment on April 26,l 2010 on the NIST campus in Gaithersburg, Maryland.

244

Energy Department Announces $5 Million for Residential Building Energy Efficiency Research and University-Industry Partnerships  

Office of Energy Efficiency and Renewable Energy (EERE)

The Energy Department today announced a $5 million investment to develop and demonstrate new residential energy efficiency solutions, and that will support building energy efficiency research at universities and colleges.

245

Energy Savings Potential and RD&D Opportunities for Residential Building HVAC Systems  

Broader source: Energy.gov [DOE]

This report assesses 135 different heating, ventilation, and air-conditioning (HVAC) technologies for U.S. residential buildings to identify and provide analysis on 19 priority technology options in various stages of development.

246

Calculation program for design of windows in residential buildings Ins Palma Santos and Svend Svendsen*  

E-Print Network [OSTI]

sustainable buildings at the Department of Civil Engineering at the Technical University of Denmark1 Calculation program for design of windows in residential buildings Inês Palma Santos and Svend Svendsen* Department of Civil Engineering, Brovej, Building 118, Technical University of Denmark, DK-2800

247

Impacts of the 2009 IECC for Residential Buildings at State Level - West Virginia  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

West Virginia West Virginia September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN WEST VIRGINIA BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN WEST VIRGINIA Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in West Virginia Summary West Virginia is proceeding with adoption of the 2009 International Energy Conservation Code (IECC) through the State Fire Commission. No energy analysis was conducted here comparing the current West Virginia code to the 2009 IECC for this reason. However, the West Virginia energy code has been one of the weaker codes in

248

Impacts of the 2009 IECC for Residential Buildings at State Level - Kansas  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Kansas Kansas September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN KANSAS BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN KANSAS Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Kansas Summary Kansas currently does not have a mandatory energy efficiency code. The 2009 International Energy Conservation Code (IECC) would substantially improve energy efficiency in Kansas homes. A limited analysis of the impact of the 2009 IECC resulted in estimated savings of $355 to $582 a year for an average new house

249

Impacts of the 2009 IECC for Residential Buildings at State Level - New Mexico  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mexico Mexico September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEW MEXICO BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEW MEXICO Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in New Mexico Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2006 IECC. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in estimated savings of $216 to

250

Impacts of the 2009 IECC for Residential Buildings at State Level - South Dakota  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

South Dakota South Dakota September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN SOUTH DAKOTA BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN SOUTH DAKOTA Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in South Dakota Summary South Dakota currently does not have a mandatory energy efficiency code. The 2009 International Energy Conservation Code (IECC) would substantially improve energy efficiency in South Dakota homes. A limited analysis of the impact of the 2009 IECC resulted in estimated savings of $383 to $427 a year for an average

251

Impacts of the 2009 IECC for Residential Buildings at State Level - Arizona  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Arizona Arizona September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN ARIZONA BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN ARIZONA Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Arizona Summary Arizona is a "home rule" state with no mandatory state-wide energy efficiency code. However, many counties and cities have adopted an energy efficiency code, most often the 2006 International Energy Conservation Code (IECC). The 2009 IECC contains several major improvements in energy efficiency over the 2006 IECC. The

252

Building Energy Software Tools Directory: Right-Suite Residential for  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Right-Suite Residential for Windows Right-Suite Residential for Windows Right-Suite Residential for Windows logo. All-in-one HVAC software performs residential loads calculations, duct sizing, energy analysis, equipment selection, cost comparison calculations, and geothermal loop design. Also allows you to design your own custom proposals. Used for system design, for sales representation, and for quotation preparations. Buy only what you need. Unused functions are shipped as demos, so the program can grow with your needs. Keywords residential loads calculations, duct sizing, energy analysis, HVAC equipment selection, system design Validation/Testing N/A Expertise Required Knowledge of general HVAC concepts. High level of computer literacy not required. Users Over 10,000 users of Right-J loads.

253

Arlington County - Green Building Incentive Program | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Arlington County - Green Building Incentive Program Arlington County - Green Building Incentive Program Arlington County - Green Building Incentive Program < Back Eligibility Commercial Construction Installer/Contractor Multi-Family Residential Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Bioenergy Solar Lighting Windows, Doors, & Skylights Heating Buying & Making Electricity Water Water Heating Wind Program Info State Virginia Program Type Green Building Incentive Provider Arlington County In October 1999, the County Board of Arlington adopted a Pilot Green Building Incentive Program using the standards established by the U. S. Green Building Council's Leadership in Energy and Environmental Design

254

Buildings Energy Data Book: 2.4 Residential Environmental Data  

Buildings Energy Data Book [EERE]

4 4 2015 Residential Buildings Energy End-Use Carbon Dioxide Emissions Splits, by Fuel Type (Million Metric Tons) (1) Natural Petroleum Gas Distil. Resid. LPG Oth(2) Total Coal Electricity (3) Total Percent Space Heating (4) 180.5 34.9 16.6 1.8 53.3 0.6 66.6 301.0 27.4% Space Cooling 0.0 161.1 161.1 14.7% Water Heating 69.6 5.1 3.1 8.2 75.3 153.1 13.9% Lighting 83.7 83.7 7.6% Refrigeration (5) 71.7 71.7 6.5% Electronics (6) 52.0 52.0 4.7% Wet Cleaning (7) 3.2 51.6 54.7 5.0% Cooking 11.5 1.8 1.8 17.9 31.1 2.8% Computers 30.0 30.0 2.7% Other (8) 10.6 10.6 149.3 160.0 14.6% Total 264.7 40.1 32.2 1.8 74.0 0.6 100% Note(s): Source(s): 759.1 1,098.4 1) Emissions assume complete combustion from energy consumption, excluding gas flaring, coal mining, and cement production. Emissions exclude wood since it is assumed that the carbon released from combustion is reabsorbed in a future carbon cycle. 2) Includes kerosene

255

Buildings Energy Data Book: 2.4 Residential Environmental Data  

Buildings Energy Data Book [EERE]

3 3 2010 Residential Buildings Energy End-Use Carbon Dioxide Emissions Splits, by Fuel Type (Million Metric Tons) (1) Natural Petroleum Gas Distil. Resid. LPG Oth(2) Total Coal Electricity (3) Total Percent Space Heating (4) 185.5 38.8 18.7 2.2 59.7 0.7 77.6 323.5 26.3% Space Cooling 0.0 210.2 210.2 17.1% Water Heating 68.7 7.1 4.6 11.7 90.4 170.8 13.9% Lighting 126.0 126.0 10.2% Electronics (5) 96.5 96.5 7.8% Refrigeration (6) 80.7 80.7 6.6% Wet Cleaning (7) 2.9 57.8 60.8 4.9% Cooking 11.4 1.9 1.9 42.6 55.9 4.5% Computers 30.5 30.5 2.5% Other (8) 10.2 10.2 36.3 46.5 3.8% Adjust to SEDS (9) 30.1 30.1 2.4% Total 268.5 45.9 35.3 2.2 83.5 0.7 100% Note(s): Source(s): 878.7 1,231.4 1) Emissions assume complete combustion from energy consumption, excluding gas flaring, coal mining, and cement production. Emissions exclude wood since it is assumed that the carbon released from combustion is reabsorbed in a future carbon cycle. Carbon emissions

256

Buildings Energy Data Book: 2.4 Residential Environmental Data  

Buildings Energy Data Book [EERE]

6 6 2035 Residential Buildings Energy End-Use Carbon Dioxide Emissions Splits, by Fuel Type (Million Metric Tons) (1) Natural Petroleum Gas Distil. Resid. LPG Oth(2) Total Coal Total Percent Space Heating (4) 169.7 22.8 14.1 1.5 38.3 0.5 76.7 285.3 23.1% Water Heating 67.2 2.6 2.1 4.7 84.8 156.7 12.7% Space Cooling 0.0 194.5 194.5 15.7% Electronics (5) 68.1 68.1 5.5% Refrigeration (6) 81.5 81.5 6.6% Lighting 74.3 74.3 6.0% Wet Cleaning (7) 3.5 50.0 53.4 4.3% Cooking 12.2 1.5 1.5 23.2 37.0 3.0% Computers 41.9 41.9 3.4% Other (8) 14.1 14.1 229.6 243.7 19.7% Total 252.7 25.4 31.9 1.5 58.7 0.5 100% Note(s): Source(s): Electricity (3) 924.5 1,236.4 1) Emissions assume complete combustion from energy consumption, excluding gas flaring, coal mining, and cement production. Emissions exclude wood since it is assumed that the carbon released from combustion is reabsorbed in a future carbon cycle. 2) Includes kerosene

257

Buildings Energy Data Book: 2.4 Residential Environmental Data  

Buildings Energy Data Book [EERE]

5 5 2025 Residential Buildings Energy End-Use Carbon Dioxide Emissions Splits, by Fuel Type (Million Metric Tons) (1) Natural Petroleum Gas Distil. Resid. LPG Oth(2) Total Coal Electricity (3) Total Percent Space Heating (4) 173.9 27.9 15.2 1.6 44.7 0.6 73.2 292.3 25.1% Space Cooling 0.0 177.2 177.2 15.2% Water Heating 70.2 3.5 2.5 6.0 83.7 159.9 13.8% Lighting 74.1 74.1 6.4% Refrigeration (5) 75.8 75.8 6.5% Electronics (6) 58.7 58.7 5.1% Wet Cleaning (7) 3.3 47.9 51.2 4.4% Cooking 11.7 1.6 1.6 20.8 34.2 2.9% Computers 37.6 37.6 3.2% Other (8) 12.4 12.4 189.1 201.5 17.3% Total 259.1 31.3 31.8 1.6 64.7 0.6 100% Note(s): Source(s): 838.1 1,162.5 1) Emissions assume complete combustion from energy consumption, excluding gas flaring, coal mining, and cement production. Emissions exclude wood since it is assumed that the carbon released from combustion is reabsorbed in a future carbon cycle. 2) Includes kerosene

258

City of Portland - Streamlined Building Permits for Residential Solar  

Broader source: Energy.gov (indexed) [DOE]

Commercial Commercial Residential Savings Category Solar Buying & Making Electricity Heating & Cooling Water Heating Program Info State Oregon Program Type Solar/Wind Permitting Standards Provider City of Portland The City of Portland's Bureau of Development Services (BDS) developed an electronic permitting process for residential solar energy system installations. With this streamlined, expedited process, solar contractors can submit the project plans and permit application online for residential installations. In order to file the online application, the contractor must first be trained. The City of Portland has staff at the permitting desk trained as solar experts to assist solar contractors who need help filing their permits in person. This process has a turnaround time of

259

Investigation of "Sick" Residential and Workplace Buildings using a  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Investigation of "Sick" Residential and Workplace Buildings using a Investigation of "Sick" Residential and Workplace Buildings using a Computerized/Web-Based Occupant Health Survey Instrument Speaker(s): James Craner Date: September 15, 2005 - 12:00pm Location: Bldg. 90 Epidemiological investigation of occupants of a residential or non-industrial workplace building (or building complex) is a well-established, public health method used to identify and measure the nature, distribution, and cause of occupational or environmental illness related to indoor air quality (IAQ) problems or concerns. Such an investigation is particularly useful where disease-exposure associations have not been clearly established and multiple environmental and human factors may be implicated or considered. --The "sick building syndrome"

260

Steam System Balancing and Tuning for Multifamily Residential Buildings, Chicago, Illinois (Fact Sheet), Building America Case Study: Technology Solutions for New and Existing Homes, Building Technologies Office (BTO)  

Broader source: Energy.gov (indexed) [DOE]

Steam System Balancing Steam System Balancing and Tuning for Multifamily Residential Buildings Chicago, Illinois PROJECT INFORMATION Project Name: Steam System Balancing and Tuning for Multifamily Residential Buildings Location: Chicago, IL Partners: Partnership for Advanced Residential Retrofit www.gastechnology.org Building Component: Steam heating distribution system and controls Application: Retrofit; Multifamily Year Tested: 2011-2012 Applicable Climate Zone(s): Cold humid continental PERFORMANCE DATA Cost of Energy Efficiency Measure (including labor): $9,000 on average Projected Energy Savings: 10.2% heating savings Chicago's older multifamily housing stock is primarily heated by centrally metered steam or hydronic systems. Often, significant temperature differentials

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Ranking cost effective energy conservation measures for heating in Hellenic residential buildings  

Science Journals Connector (OSTI)

Abstract Residential buildings comprise the biggest segment of the European building stock and they are responsible for the majority of the building's sector energy consumption and CO2 emissions. This paper documents the potential benefits and sets the priorities of individual energy conservation measures (ECMs) to reduce heating energy consumption in Hellenic residential buildings, including space heating and domestic hot water production. The analysis is facilitated by using the available Hellenic typology for residential buildings that consists of 24 typical buildings, derived after a classification in three construction periods, two building sizes and four climate zones. The focus is mainly on the implementation of \\{ECMs\\} that have low first-cost investment and short payback period. In order to prioritize \\{ECMs\\} that would be most attractive to building owners, two ranking criteria are used, namely primary heating energy savings and payback period. Finally, the preliminary results are used to provide an insight on the potential abatement of CO2 emissions for the national residential building stock.

K.G. Droutsa; S. Kontoyiannidis; E.G. Dascalaki; C.A. Balaras

2014-01-01T23:59:59.000Z

262

Local Option - Building Permit Fee Waivers for Renewable Energy Projects  

Broader source: Energy.gov (indexed) [DOE]

Local Option - Building Permit Fee Waivers for Renewable Energy Local Option - Building Permit Fee Waivers for Renewable Energy Projects (Connecticut) Local Option - Building Permit Fee Waivers for Renewable Energy Projects (Connecticut) < Back Eligibility Agricultural Commercial Construction Fed. Government General Public/Consumer Industrial Installer/Contractor Institutional Local Government Low-Income Residential Multi-Family Residential Nonprofit Residential Schools State Government Tribal Government Savings Category Bioenergy Alternative Fuel Vehicles Hydrogen & Fuel Cells Water Buying & Making Electricity Solar Home Weatherization Wind Program Info State Connecticut Program Type Solar/Wind Permitting Standards Provider Department of Energy and Environmental Protection As of July 2011, Connecticut authorizes municipalities to pass a local

263

SPP sales flyer for residential home builders | ENERGY STAR Buildings &  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

residential home builders residential home builders Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources Success stories Target Finder

264

Summary of Components of the "Best of the Region" Standard for New Non-Residential Buildings  

E-Print Network [OSTI]

Summary of Components of the "Best of the Region" Standard for New Non-Residential Buildings Specifications for Implementation of Fifth Power Plan Model Conservation Standards for New Commercial Buildings Adapted from: Northwest Energy NWBest Project Summary of Components of the "Best of the Region" Standard

265

Lighting in Residential and Commercial Buildings (1993 and 1995 Data) --  

U.S. Energy Information Administration (EIA) Indexed Site

Types of Lights > Lit Floorspace In Lit Buildings Types of Lights > Lit Floorspace In Lit Buildings Lit Floorspace in Lit Buildings To analyze the use of different kinds of lighting equipment with data from the 1995 Commercial Buildings Energy Consumption Survey (CBECS), building floorspace can be described in three different ways: total floorspace in all buildings; total floorspace in lit buildings; and total lit floorspace in buildings. The latter two measures of floorspace with lighting differ because not all of the floorspace in lit buildings is illuminated (see Table 1): Table 1: Floorspace Denominators Used To Analyze Lighting Equipment Usage (Million Square Feet) 1995 CBECS Total Floorspace in All Buildings: 58, 772 1995 CBECS Total Floorspace in Lit Buildings: 56, 261 1995 CBECS Total Lit Floorspace in Buildings: 50, 303

266

BetterBuildings for Michigan Residential Case Study  

Broader source: Energy.gov [DOE]

This is a document from BetterBuilding for Michigan posted on the website of the U.S. Department of Energy's BetterBuildings Neighborhood Program.

267

Building America Expert Meeting: Achieving the Best Installed Performance from High-Efficiency Residential Gas Furnaces  

Broader source: Energy.gov [DOE]

This report describes a Building America expert meeting hosted on July 28, 2011, by the Partnership for Advanced Residential Retrofit team. The purpose of this meeting was to identify installation practices that provide the best installed efficiency for residential gas furnaces, explain how AFUE and field efficiency can differ, and investigate the impact of installation practices on the efficiency and long-term durability of the furnace.

268

Commonwealth Solar Hot Water Residential Program | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Commonwealth Solar Hot Water Residential Program Commonwealth Solar Hot Water Residential Program Commonwealth Solar Hot Water Residential Program < Back Eligibility Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Solar Heating Water Heating Maximum Rebate $3,500 per building or 25% of total installed costs Program Info Funding Source Massachusetts Renewable Energy Trust Fund Start Date 02/07/2011 Expiration Date 12/31/2016 State Massachusetts Program Type State Rebate Program Rebate Amount Base rate: $45 X SRCC rating in thousands btu/panel/day (Category D, Mildly Cloudy Day) Additional $200/system for systems with parts manufactured in Massachusetts Additional $1,500/system for metering installation Adder for natural disaster relief of twice the base rebate.

269

The Temperature Sensitivity of the Residential Load and Commercial Building Load  

SciTech Connect (OSTI)

This paper presents a building modeling approach to quickly quantify climate change impacts on energy consumption, peak load, and load composition of residential and commercial buildings. This research focuses on addressing the impact of temperature changes on the building heating and cooling load in 10 major cities across the Western United States and Canada. A building simulation software are first used to quantify the hourly energy consumption of different building types by end-use and by vintage. Then, the temperature sensitivities are derived based on the climate data inputs.

Lu, Ning; Taylor, Zachary T.; Jiang, Wei; Correia, James; Leung, Lai R.; Wong, Pak C.

2009-07-26T23:59:59.000Z

270

Potential Job Creation as a Result of Adopting New Residential Building  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Potential Job Creation as a Result of Adopting New Residential Building Potential Job Creation as a Result of Adopting New Residential Building Energy Codes The U.S. Department of Energy (DOE) Building Energy Codes Program (BECP) asked Pacific Northwest National Laboratory (PNNL) to research and ascertain whether jobs would be created in individual states based on their adoption of model building energy codes. The overall analysis found that transforming the U.S. housing stock through the adoption of more energy-efficient building energy codes could create hundreds of jobs in each of several states. The following reports discuss the analysis and results for four representative states. Minnesota Nevada Rhode Island Tennessee *Please note, these reports have been formatted to facilitate double-sided printing. Contacts Web Site Policies

271

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book [EERE]

2 2 2005 Household Energy Expenditures, by Vintage ($2010) | Year | Prior to 1950 887 | 22% 1950 to 1969 771 | 22% 1970 to 1979 736 | 16% 1980 to 1989 741 | 16% 1990 to 1999 752 | 16% 2000 to 2005 777 | 9% | Average 780 | Total 100% Note(s): Source(s): 1.24 2,003 1) Energy expenditures per square foot were calculated using estimates of average heated floor space per household. According to the 2005 Residential Energy Consumption Survey (RECS), the average heated floor space per household in the U.S. was 1,618 square feet. Average total floor space, which includes garages, attics and unfinished basements, equaled 2,309 square feet. EIA, 2005 Residential Energy Consumption Survey, Oct. 2008 for 2005 expenditures; and EIA, Annual Energy Review 2010, Oct. 2011, Appendix D, p. 353 for price inflators.

272

Flood Zone Building Permits (District of Columbia) | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

You are here You are here Home » Flood Zone Building Permits (District of Columbia) Flood Zone Building Permits (District of Columbia) < Back Eligibility Utility Fed. Government Commercial Agricultural Investor-Owned Utility State/Provincial Govt Industrial Construction Municipal/Public Utility Local Government Residential Installer/Contractor Rural Electric Cooperative Tribal Government Low-Income Residential Schools Retail Supplier Institutional Multi-Family Residential Systems Integrator Fuel Distributor Nonprofit General Public/Consumer Transportation Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State District of Columbia Program Type Environmental Regulations Provider District Department of the Environment

273

Evaluation on Cooling Energy Load with Varied Envelope Design for High-Rise Residential Buildings in Malaysia  

E-Print Network [OSTI]

With the development of the economy in the recent years, Malaysia is maintaining a high economic growth and therefore, its energy consumption increases dramatically. Residential buildings are characterized by being envelope-load dominated buildings...

Al-Tamimi, N.; Fadzil, S.

2010-01-01T23:59:59.000Z

274

Los Angeles County - Green Building Program | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Los Angeles County - Green Building Program Los Angeles County - Green Building Program Los Angeles County - Green Building Program < Back Eligibility Commercial Construction Industrial Local Government Multi-Family Residential Nonprofit Residential Schools Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Bioenergy Solar Lighting Windows, Doors, & Skylights Alternative Fuel Vehicles Hydrogen & Fuel Cells Heating Buying & Making Electricity Water Water Heating Program Info State California Program Type Building Energy Code Provider Los Angeles County Department of Regional Planning '''''Note: The Regional Planning Commission is considering amendments to the requirements outlined here. See the website above for the most recent

275

Building America Residential Energy Efficiency Technical Update Meeting: August 2011  

Broader source: Energy.gov [DOE]

On this page, you may link to the summary report and presentations for the Building America Technical Update meeting in August 2011, held in Denver, Colorado.

276

Building America Residential Energy Efficiency Stakeholders Meeting: March 2011  

Broader source: Energy.gov [DOE]

On this page, you may link to the summary report and presentations for the Building America Stakeholders meeting in March 2011, held in Atlanta, Georgia.

277

Building America Residential Energy Efficiency Research Planning Meeting: October 2011  

Broader source: Energy.gov [DOE]

On this page, you may link to the summary report and presentations for the Building America Research Planning meeting in October 2011, held in Washington, D.C.

278

Building America Research Teams: Spotlight on Alliance for Residential...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

explore specific technology areas that can radically improve home performance. BARA communication projects include Building America outreach products and activities (see...

279

The Technical and Economical Analysis of a Centralized Air-Conditioning System with Cold Storage Refrigeration in High-Rise Residential Buildings  

E-Print Network [OSTI]

In recent years, the application of a centralized air-conditioning system (CACS) with cold storage refrigeration in high-rise residential buildings has gradually increased. Due to the large difference between civil residential buildings...

Xiang, C.; Xie, G.

2006-01-01T23:59:59.000Z

280

Better Buildings Residential Network: Using Loan Performance Data to Inform Program Implementation  

Broader source: Energy.gov [DOE]

Please join the Better Buildings Residential Network for the Financing & Revenue/Data & Evaluation co-series peer exchange call: “Using Loan Performance Data to Inform Program Implementation.” What is the relationship, if any, between loan performance and completed energy efficiency measures? How are home affordability, loan default rates, and decreasing energy costs related?

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

2008 Residential Building Efficiency Standards 1 Efficiency Ratings and Performance Modeling Inputs  

E-Print Network [OSTI]

Residential Building Efficiency Standards 2 a. Refrigerant charge and metering (Reference Appendices, RA3 Cooling · SplitHeatPump: SEER 13 · Refrigerant charge (or charge indicator light), watts/cfm and air flow.2), or presence of charge indicator display (Reference Appendices, RA3.4) b. Air system fan flow and air handler

282

Revised: March 6, 2013 2013 Residential Building Energy Efficiency Standards Measures Summary  

E-Print Network [OSTI]

for all residential buildings including kitchens, bathrooms, dining rooms, utility rooms, garages, hall.0(j)2Aii and Section 150.0(j)4) 5. Solar Ready Measure ­ 250 square feet of solar ready zone on single family roofs. (Section150.0(r)) Compliance Options 1. Solar Photovoltaic can be used

283

A Temporal Motif Mining Approach to Unsupervised Energy Disaggregation: Applications to Residential and Commercial Buildings  

E-Print Network [OSTI]

every device in a building. The ensu- ing computational problem is to disaggregate total energy us- age disaggregation. This is the task of, non-intrusively, monitoring aggregate energy usage (electricity, waterA Temporal Motif Mining Approach to Unsupervised Energy Disaggregation: Applications to Residential

Ramakrishnan, Naren

284

Impacts of the 2009 IECC for Residential Buildings at State Level  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

1 DISCLAIMER: The results contained in this report are complete and accurate to the best of BECP's knowledge, based on information available at the time it was written. BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS AT STATE LEVEL V Table of Contents 1.0 Chapter 1 Overview of the 2009 IECC ........................................................................................................ 1 1.1 Introduction .............................................................................................................................................. 1 1.2 Overview of the 2009 IECC ..................................................................................................................... 1

285

Energy Efficient Residential Building Code for Arab Countries  

E-Print Network [OSTI]

of building envelope and weather data in reducing electrical energy consumption. The impacts of the following parameters were studied namely; walls and roof constructions, window size and glazing type for different geographical locations in the Arab Countries...

Hanna, G. B.

2010-01-01T23:59:59.000Z

286

Energy savings from direct-DC in U.S. residential buildings  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

savings from direct-DC in U.S. residential buildings savings from direct-DC in U.S. residential buildings Title Energy savings from direct-DC in U.S. residential buildings Publication Type Journal Article Year of Publication 2013 Authors Vossos, Vagelis, Karina Garbesi, and Hongxia Shen Journal Energy and Buildings Volume Volume 68, Part A Pagination 223-231 Date Published 09/2013 Keywords Direct current (DC), energy conservation, Photovoltaics (PV), residential buildings Abstract An increasing number of energy-efficient appliances operate on direct current (DC) internally, offering the potential to use DC directly from renewable energy systems, thereby avoiding the energy losses inherent in converting power to alternating current (AC) and back. This paper investigates that potential for net-metered residences with on-site photovoltaics (PV) by modeling the net power draw of a 'direct-DC house' compared to that of a typical net-metered house with AC distribution, assuming identical DC-internal loads. The model comparisons were run for 14 cities in the United States, using hourly, simulated PV-system output and residential loads. The model tested the effects of climate and battery storage. A sensitivity analysis was conducted to determine how future changes in the efficiencies of power system components might affect potential energy savings. Based on this work, we estimate that net-metered PV residences could save 5% of their total electricity load for houses without storage and 14% for houses with storage. Direct-DC energy savings are sensitive to power system and appliance conversion efficiencies but are not significantly influenced by climate.

287

Energy Efficiency Trends in Residential and Commercial Buildings … August 2010  

Broader source: Energy.gov (indexed) [DOE]

Efficiency Efficiency Trends in Residential and Commercial Buildings August 2010 Prepared by McGraw-Hill Construction for the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy OF ENERGY Table of Contents INTRODUCTION 3 EXECUTIVE SUMMARY 4 Chapter One DRIVERS OF ENERGY USE IN BUILDINGS 5 Chapter Two PROFILES OF BUILDING-SECTOR ENERGY USE 13 Chapter Three PATTERNS OF ENERGY-EFFICIENT BUILDING PRODUCT ADOPTION IN COMMERCIAL BUILDING DESIGN 17 Chapter Four INDUSTRY RESEARCH FINDINGS DRIVING ENERGY-EFFICIENT BUILDINGS 25 Chapter Five ENERGY EFFICIENCY STANDARDS, CODES AND INCENTIVES 31 Chapter Six VOLUNTARY PROGRAMS AND LOCAL AND STATE POLICIES FOR GREEN AND ENERGY-EFFICIENT BUILDINGS 38 Chapter Seven RESOURCES FOR MORE INFORMATION 50 Notes and definitions:

288

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book [EERE]

4 4 2005 Average Household Expenditures as Percent of Annual Income, by Census Region ($2010) Item Energy (1) Shelter (2) Food Telephone, water and other public services Household supplies, furnishings and equipment (3) Transportation (4) Healthcare Education Personal taxes (5) Average Annual Expenditures Average Annual Income Note(s): Source(s): 1) Average household energy expenditures are calculated from the Residential Energy Consumption Survey (RECS), while average expenditures for other categories are calculated from the Consumer Expenditure Survey (CE). RECS assumed total US households to be 111,090,617 in 2005, while the CE data is based on 117,356,000 "consumer units," which the Bureau of Labor Statistics defines to be financially independent persons or groups of people that use their incomes to make joint expenditure decisions, including all members of a

289

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book [EERE]

3 3 2005 Average Household Expenditures, by Census Region ($2010) Item Energy (1) Shelter (2) Food Telephone, water and other public services Household supplies, furnishings and equipment (3) Transportation (4) Healthcare Education Personal taxes (5) Other expenditures Average Annual Income Note(s): Source(s): 1) Average household energy expenditures are calculated from the Residential Energy Consumption Survey (RECS), while average expenditures for other categories are calculated from the Consumer Expenditure Survey (CE). RECS assumed total US households to be 111,090,617 in 2005, while the CE data is based on 117,356,000 "consumer units," which the Bureau of Labor Statistics defines to be financially independent persons or groups of people that use their incomes to make joint expenditure decisions, including all members of a

290

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book [EERE]

5 5 2010 Residential Energy End-Use Expenditure Splits, by Fuel Type ($2010 Billion) (1) Natural Petroleum Gas Distil. LPG Kerosene Total Coal Electricity Total Percent Space Heating (2) 38.7 11.2 8.0 19.8 0.0 14.3 72.9 28.9% Space Cooling (3) 0.0 35.4 35.4 14.0% Water Heating (4) 14.3 2.1 2.0 4.0 14.2 32.6 12.9% Lighting 22.6 22.6 9.0% Refrigeration (5) 14.9 14.9 5.9% Electronics (6) 17.8 17.8 7.1% Cooking 2.4 0.8 0.8 6.0 9.2 3.7% Wet Cleaning (7) 0.6 10.7 11.3 4.5% Computers 5.6 5.6 2.2% Other (8) 0.0 4.4 4.4 6.7 11.1 4.4% Adjust to SEDS (9) 13.6 13.6 5.4% Total 56.1 13.3 15.2 29.0 0.0 166.8 251.8 100% Note(s): Source(s): 0.5 0.5 1) Expenditures include coal and exclude wood. 2) Includes furnace fans ($4.5 billion). 3) Fan energy use included. 4) Includes residential recreational water heating ($1.4 billion). 5) Includes refrigerators ($15.3 billion) and freezers ($4.4 billion). 6) Includes color televisions ($11.0

291

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book [EERE]

3 3 Residential Aggregate Energy Expenditures, by Year and Major Fuel Type ($2010 Billion) (1) Electricity Total 1980 158.5 1981 164.0 1982 172.3 1983 176.1 1984 178.5 1985 176.8 1986 169.2 1987 167.1 1988 170.1 1989 172.8 1990 168.2 1991 169.9 1992 166.7 1993 175.6 1994 174.9 1995 172.7 1996 181.8 1997 180.0 1998 173.5 1999 174.0 2000 192.8 2001 203.3 2002 192.1 2003 208.8 2004 215.1 2005 236.7 2006 240.0 2007 246.1 2008 259.6 2009 241.6 2010 251.8 2011 251.3 2012 247.1 2013 240.3 2014 239.4 2015 241.7 2016 241.8 2017 243.0 2018 244.7 2019 246.4 2020 247.9 2021 250.4 2022 253.3 2023 255.6 2024 257.8 2025 260.3 2026 263.2 2027 266.0 2028 267.6 2029 268.1 2030 269.7 2031 272.9 2032 276.6 2033 280.4 2034 284.6 2035 288.6 Note(s): Source(s): 1) Residential petroleum products include distillate fuel oil, LPG, and kerosene. EIA, State Energy Data 2009: Prices and Expenditures, Jun. 2011, Table 2 for 1980-2009; EIA, Annual Energy Outlook 2012 Early Release, Jan. 2012, Table

292

ASHRAE Standard 90.1 1999 Energy Conservation in Non-Residential Buildings  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ASHRAE Standard 90.1 1999 Energy Conservation in Non-Residential Buildings ASHRAE Standard 90.1 1999 Energy Conservation in Non-Residential Buildings Speaker(s): Steve Taylor Date: April 20, 2000 - 12:00pm Location: Bldg. 90 Seminar Host/Point of Contact: Julie Osborn Steve Taylor, the principal of Taylor Engineering, will be providing an overview of the envelope, lighting, and HVAC requirements of Standard 90.1. Mr. Taylor is a registered mechanical engineer specializing in HVAC system design, control system design, indoor air quality engineering, computerized building energy analysis, and HVAC system commissioning. He graduated from Stanford University with a BS in Physics and a MS in Mechanical Engineering and has over 20 years of commercial HVAC system design and construction experience. He was the primary author of the HVAC

293

Summary of Gaps and Barriers for Implementing Residential Building Energy Efficiency Strategies  

Broader source: Energy.gov (indexed) [DOE]

Gaps and Gaps and Barriers for Implementing Residential Building Energy Efficiency Strategies 2010 Residential Buildings Energy Efficiency Meeting Denver, Colorado - July 20 - 22, 2010 August 2010 Prepared by the National Renewable Energy Laboratory For the U.S. Department of Energy Building Technologies Program NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned

294

Using Direct-DC Power Distribution in U.S. Residential Buildings Can Save  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Using Direct-DC Power Distribution in U.S. Residential Buildings Can Save Using Direct-DC Power Distribution in U.S. Residential Buildings Can Save Energy October 2013 October-November Special Focus: Energy Efficiency, Buildings and the Electric Grid An increasing fraction of the most efficient appliances on the market operate on direct current (DC) internally, making it possible to use DC from renewable energy systems directly and avoid the losses inherent in converting power to alternating current (AC) and back, as is current practice. Products are also emerging on the commercial market that take advantage of that possibility. Lawrence Berkeley National Laboratory researchers Vagelis Vossos, Karina Garbesi, and Hongxia Shen investigated the potential savings of direct-DC power distribution in net-metered residences with on-site photovoltaics

295

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book [EERE]

5 5 2005 Households and Energy Expenditures, by Income Level ($2010) Energy Expenditures by Household Income Households (millions) Household Less than $10,000 9.9 9% $10,000 to $14,999 8.5 8% $15,000 to $19,999 8.4 8% $20,000 to $29,999 15.1 14% $30,000 to $39,999 13.6 12% $40,000 to $49,999 11.0 10% $50,000 to $74,999 19.8 18% $75,000 to $99,999 10.6 10% $100,000 or more 14.2 13% Total 111.1 100% Note(s): Source(s): 7% 1) See Table 2.3.15 for more on energy burdens. 2) A household is defined as a family, an individual, or a group of up to nine unrelated individuals occupying the same housing unit. EIA, 2005 Residential Energy Consumption Survey, Oct. 2008, Table US-1 part 2; and EIA, Annual Energy Review 2010, Oct. 2011, Appendix D, p. 353 for price inflators. 2,431 847 3% 2,774 909 3% 1,995

296

Sustainable Building Tax Credit (Personal) | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Personal) Personal) Sustainable Building Tax Credit (Personal) < Back Eligibility Commercial Multi-Family Residential Nonprofit Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Solar Lighting Windows, Doors, & Skylights Heating Buying & Making Electricity Water Heating Wind Program Info Start Date 1/1/2007 Expiration Date 12/31/2016 State New Mexico Program Type Personal Tax Credit Rebate Amount Varies based on the square footage of the building and the certification level Provider New Mexico Taxation and Revenue Department SB 463, enacted in April 2007, established a personal tax credit and a corporate tax credit for sustainable buildings in New Mexico. The tax

297

Sustainable Building Tax Credit (Corporate) | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Corporate) Corporate) Sustainable Building Tax Credit (Corporate) < Back Eligibility Commercial Multi-Family Residential Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Solar Lighting Windows, Doors, & Skylights Heating Buying & Making Electricity Water Heating Wind Program Info Start Date 1/1/2007 Expiration Date 12/31/2016 State New Mexico Program Type Corporate Tax Credit Rebate Amount Varies based on the square footage of the building and the certification level Provider New Mexico Taxation and Revenue Department SB 463, enacted in April 2007, established a personal tax credit and a corporate tax credit for sustainable buildings in New Mexico. The tax

298

TOPIC Brief BUILDING TECHNOLOGIES PROGRAM Residential Duct Insulation and Sealing Requirements TOPIC BRIEF 1  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Duct Insulation and Sealing Requirements TOPIC BRIEF 1 Duct Insulation and Sealing Requirements TOPIC BRIEF 1 Residential Duct Insulation and Sealing Requirements Studies show that duct air leakage results in major energy losses. A ll versions of the International Energy Conservation Code (IECC) require ducts, air handlers, filter boxes, and air cavities used as ducts to be sealed, and reference Chapter 16 of the International Residential Code for details on air sealing. This sealing is required on all ducts and other air distribution components regardless of whether they are located inside or outside the conditioned living space. For single-family homes and other low-rise residential buildings, the 2009 and 2012 IECC have duct insulation and sealing requirements in Section 403.2. Both codes require insulation

299

Building America Top Innovations Hall of Fame Profile … National Residential Efficiency Measures Database  

Broader source: Energy.gov (indexed) [DOE]

Robust cost data for energy-efficiency Robust cost data for energy-efficiency measures provide an essential framework for transforming the housing industry to high-performance homes. These data allow for effective optimization capabilities to guide builders, researchers, HERS raters, contractors, and designers. Researchers at the U.S. Department of Energy (DOE)'s National Renewable Energy Laboratory (NREL) have developed a public database that characterizes the performance and costs of common residential energy-efficiency measures. The database, called the National Residential Efficiency Measures Database, can be found at www.buildingamerica.gov. The data are available for use in software programs that evaluate cost-effective measures to improve the energy efficiency of new and existing residential buildings.

300

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book [EERE]

7 7 Range 10 4 48 Clothes Dryer 359 (2) 4 49 Water Heating Water Heater-Family of 4 40 64 (3) 26 294 Water Heater-Family of 2 40 32 (3) 12 140 Note(s): Source(s): 1) $1.139/therm. 2) Cycles/year. 3) Gallons/day. A.D. Little, EIA-Technology Forecast Updates - Residential and Commercial Building Technologies - Reference Case, Sept. 2, 1998, p. 30 for range and clothes dryer; LBNL, Energy Data Sourcebook for the U.S. Residential Sector, LBNL-40297, Sept. 1997, p. 62-67 for water heating; GAMA, Consumers' Directory of Certified Efficiency Ratings for Heating and Water Heating Equipment, Apr. 2002, for water heater capacity; and American Gas Association, Gas Facts 1998, December 1999, www.aga.org for range and clothes dryer consumption. Operating Characteristics of Natural Gas Appliances in the Residential Sector

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book [EERE]

8 8 2035 Residential Energy End-Use Expenditure Splits, by Fuel Type ($2010 Billion) (1) Natural Petroleum Gas Distil. LPG Kerosene Total Coal Electricity Total Percent Space Heating (2) 44.3 10.3 7.7 18.6 0.0 16.0 79.0 27.4% Space Cooling (3) 0.0 40.6 40.6 14.1% Water Heating 17.6 1.2 1.2 2.3 17.7 37.6 13.0% Lighting 15.5 15.5 5.4% Refrigeration (4) 17.0 17.0 5.9% Electronics (5) 14.2 14.2 4.9% Wet Cleaning (6) 0.9 10.4 11.3 3.9% Cooking 3.2 0.8 0.8 4.8 8.9 3.1% Computers 8.7 8.7 3.0% Other (7) 0.0 7.7 7.7 47.9 55.7 19.3% Total 66.0 11.5 17.5 29.6 0.0 193.0 288.6 100% Note(s): Source(s): 0.6 0.6 1) Expenditures include coal and exclude wood. 2) Includes furnace fans ($4.8 billion). 3) Fan energy use included. 4) Includes refrigerators ($14.1 billion) and freezers ($2.9 billion). 5) Includes color televisions ($14.2 billion). 6) Includes clothes washers ($0.8 billion), natural gas

302

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book [EERE]

2 2 Residential Energy Prices, by Year and Fuel Type ($2010) LPG ($/gal) 1980 2.24 1981 2.51 1982 2.30 1983 2.14 1984 2.10 1985 1.96 1986 1.54 1987 1.42 1988 1.39 1989 1.48 1990 1.69 1991 1.56 1992 1.40 1993 1.33 1994 1.27 1995 1.22 1996 1.37 1997 1.34 1998 1.15 1999 1.16 2000 1.70 2001 1.59 2002 1.42 2003 1.67 2004 1.84 2005 2.36 2006 2.64 2007 2.81 2008 3.41 2009 2.52 2010 2.92 2011 3.62 2012 3.65 2013 3.43 2014 3.60 2015 3.74 2016 3.79 2017 3.86 2018 3.89 2019 3.92 2020 3.96 2021 3.99 2022 4.02 2023 4.07 2024 4.10 2025 4.15 2026 4.19 2027 4.23 2028 4.26 2029 4.30 2030 4.34 2031 4.35 2032 4.38 2033 4.43 2034 4.50 2035 4.55 Source(s): EIA, State Energy Data 2009: Prices and Expenditures, Jun. 2011, Table 2, p. 24-25 for 1980-2009; EIA, Annual Energy Outlook 2012 Early Release, Jan. 2012, Table A3, p. 6-8 for 2010-2035 and Table G1, p. 215 for fuels' heat content; and EIA, Annual Energy Review 2010, Oct. 2011, Appendix D, p. 353 for

303

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book [EERE]

7 7 2025 Residential Energy End-Use Expenditure Splits, by Fuel Type ($2010 Billion) (1) Natural Petroleum Gas Distil. LPG Kerosene Total Coal Electricity Total Percent Space Heating (2) 39.7 11.5 7.8 19.9 0.0 15.0 74.5 28.6% Space Cooling (3) 0.0 36.2 36.2 13.9% Water Heating 16.0 1.4 1.3 2.7 17.1 35.9 13.8% Lighting 15.2 15.2 5.8% Refrigeration (4) 15.5 15.5 6.0% Electronics (5) 12.0 12.0 4.6% Wet Cleaning (6) 0.8 9.8 10.5 4.1% Cooking 2.7 0.8 0.8 4.3 7.8 3.0% Computers 7.7 7.7 2.9% Other (7) 0.0 6.4 6.4 38.7 45.0 17.3% Total 59.1 12.9 16.3 29.8 0.0 171.3 260.3 100% Note(s): Source(s): 0.6 0.6 1) Expenditures include coal and exclude wood. 2) Includes furnace fans ($4.7 billion). 3) Fan energy use included. 4) Includes refrigerators ($12.7 billion) and freezers ($2.8 billion). 5) Includes color televisions ($12 billion). 6) Includes clothes washers ($0.8 billion), natural gas

304

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book [EERE]

6 6 2015 Residential Energy End-Use Expenditure Splits, by Fuel Type ($2010 Billion) (1) Natural Petroleum Gas Distil. LPG Kerosene Total Coal Electricity Total Percent Space Heating (2) 35.0 13.0 8.1 21.6 0.0 14.0 70.6 29.2% Space Cooling (3) 0.0 33.8 33.8 14.0% Water Heating 13.5 1.9 1.5 3.4 15.8 32.7 13.5% Lighting 17.6 17.6 7.3% Refrigeration (4) 15.0 15.0 6.2% Electronics (5) 10.9 10.9 4.5% Wet Cleaning (6) 0.6 10.8 11.4 4.7% Cooking 2.2 0.9 0.9 3.8 6.8 2.8% Computers 6.3 6.3 2.6% Other (7) 0.0 5.2 5.2 31.3 36.5 15.1% Total 51.3 14.9 15.7 31.1 0.0 159.3 241.7 100% Note(s): Source(s): 0.6 0.6 1) Expenditures include coal and exclude wood. 2) Includes furnace fans ($4.6 billion). 3) Fan energy use included. 4) Includes refrigerators ($12.3 billion) and freezers ($2.8 billion). 5) Includes color televisions ($10.9 billion). 6) Includes clothes washers ($1.1 billion), natural gas

305

Eagle County - Eagle County Efficient Building Code (ECO-Green Build) |  

Broader source: Energy.gov (indexed) [DOE]

Eagle County - Eagle County Efficient Building Code (ECO-Green Eagle County - Eagle County Efficient Building Code (ECO-Green Build) Eagle County - Eagle County Efficient Building Code (ECO-Green Build) < Back Eligibility Commercial Multi-Family Residential Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Program Info State Colorado Program Type Building Energy Code Provider Eagle County In an effort to reduce county-wide energy consumption and improve the environment, Eagle County established their own efficient building code (ECO-Green Build) which applies to all new construction and renovations/additions over 50% of the existing floor area of single-family and multifamily residences, and commercial buildings.

306

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book [EERE]

Residential Energy Prices, by Year and Major Fuel Type ($2010 per Million Btu) Electricity Natural Gas Petroleum (1) Avg. 1980 36.40 8.35 16.77 17.64 1981 38.50 8.88 18.35 19.09 1982 40.15 10.08 17.28 19.98 1983 40.43 11.30 16.08 21.00 1984 38.80 11.02 15.61 20.20 1985 38.92 10.68 14.61 20.10 1986 38.24 9.98 11.88 19.38 1987 37.29 9.22 11.23 18.73 1988 36.22 8.80 10.83 18.02 1989 35.67 8.71 11.96 17.93 1990 35.19 8.63 13.27 18.64 1991 34.88 8.38 12.49 18.31 1992 34.79 8.28 11.23 17.76 1993 34.52 8.47 10.75 17.76 1994 34.04 8.63 10.63 17.87 1995 33.43 8.00 10.33 17.50 1996 32.63 8.21 11.70 17.28 1997 32.34 8.83 11.47 17.69 1998 31.33 8.55 9.96 17.73 1999 30.52 8.29 10.13 17.09 2000 30.13 9.54 14.18 18.06 2001 30.71 11.50 13.98 19.38 2002 29.73 9.24 12.26 17.89 2003 30.05 10.87 14.21 18.88 2004 29.98 11.97 15.54 19.76 2005 30.64 13.66 18.93 21.50 2006 32.67 14.30 21.06 23.34 2007 32.50

307

Buildings Energy Data Book: 2.2 Residential Sector Characteristics  

Buildings Energy Data Book [EERE]

3 3 Share of Total U.S. Households, by Census Region, Division, and Vintage, as of 2005 Prior to 1950 to 1970 to 1980 to 1990 to 2000 to Region 1950 1969 1979 1989 1999 2005 Northeast 6.7% 5.2% 2.4% 2.1% 1.3% 0.8% 18.5% New England 2.1% 1.2% 0.5% 0.5% 0.3% 0.3% 4.9% Middle Atlantic 4.6% 4.0% 1.9% 1.6% 1.0% 0.5% 13.6% Midwest 5.7% 5.8% 3.6% 2.5% 3.7% 1.7% 23.0% East North Central 4.3% 3.9% 2.7% 1.8% 2.1% 1.1% 16.0% West North Central 1.4% 1.9% 0.9% 0.7% 1.6% 0.6% 7.1% South 4.0% 6.9% 6.4% 7.5% 7.5% 4.3% 36.6% South Atlantic 2.0% 3.4% 3.5% 4.2% 4.3% 2.2% 17.4% East South Central 0.9% 1.3% 0.9% 1.0% 1.3% 0.7% 6.2% West South Central 1.2% 2.3% 4.7% 2.2% 1.8% 1.4% 13.6% West 3.4% 4.6% 4.5% 4.6% 3.1% 1.5% 21.8% Mountain 0.7% 1.2% 1.3% 1.5% 1.3% 0.9% 6.8% Pacific 2.8% 3.4% 3.3% 3.1% 1.8% 0.6% 15.0% United States 19.9% 22.5% 17.0% 16.7% 15.6% 8.3% 100% Source(s): All Vintages EIA, 2005 Residential Energy Consumption Survey, Oct. 2008, Table HC10

308

Lighting in Residential and Commercial Buildings (1993 and 1995 data) --  

U.S. Energy Information Administration (EIA) Indexed Site

Light Type Used > Related Goverment Sites Light Type Used > Related Goverment Sites Links to Related Government Sites Publications list from U.S. Department of Energy's Office of Federal Energy Management Programs (FEMP) U.S. Environmental Protection Agency Green Lights Program Updated FLEX 3.0 Lighting software solution available from U.S. Department of Energy's Office of Federal Energy Management Programs Section 3.4 on Lighting and Section 7.2 on Lighting Control can be obtained at this site U.S. Department of Energy's Office of Federal Energy Management Programs lights basic training will be completed in FY '98 Lighting mailing list for exchange of information on lighting issues Lights in commercial buildings in the 21st Century List of major areas of expertise at Lawrence Berkeley National Laboratory, illustrated with specific projects

309

Buildings Energy Data Book: 2.2 Residential Sector Characteristics  

Buildings Energy Data Book [EERE]

7 7 Characteristics of a Typical Single-Family Home (1) Year Built | Building Equipment Fuel Age (5) Occupants 3 | Space Heating Natural Gas 12 Floorspace | Water Heating Natural Gas 8 Heated Floorspace (SF) 1,934 | Space Cooling 8 Cooled Floorspace (SF) 1,495 | Garage 2-Car | Stories 1 | Appliances Size Age (5) Foundation Concrete Slab | Refrigerator 19 Cubic Feet 8 Total Rooms (2) 6 | Clothes Dryer Bedrooms 3 | Clothes Washer Other Rooms 3 | Range/Oven Full Bathroom 2 | Microwave Oven Half Bathroom 0 | Dishwasher Windows | Color Televisions 3 Area (3) 222 | Ceiling Fans 3 Number (4) 15 | Computer 2 Type Double-Pane | Printer Insulation: Well or Adequate | Note(s): Source(s): 2-Door Top and Bottom Electric Top-Loading Electric 1) This is a weighted-average house that has combined characteristics of the Nation's stock homes. Although the population of homes with

310

EWEB - Residential Energy Efficiency Loan Programs | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

EWEB - Residential Energy Efficiency Loan Programs EWEB - Residential Energy Efficiency Loan Programs EWEB - Residential Energy Efficiency Loan Programs < Back Eligibility Multi-Family Residential Residential Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Sealing Your Home Ventilation Heating & Cooling Commercial Heating & Cooling Heat Pumps Windows, Doors, & Skylights Maximum Rebate Ductwork: not specified Thermostats: not specified Ductless Heat Pump: $4,000 Air Source Heat Pump: $7,000 Geothermal Heat Pump: $8,000 Air Sealing: up to $800 Program Info State Oregon Program Type Utility Loan Program Utility Loan Program Rebate Amount Windows and Insulation: not specified Ductwork: not specified

311

Public Meeting: Physical Characterization of Smart and Grid-Connected Commercial and Residential Building End-Use Equipment and Appliances  

Broader source: Energy.gov [DOE]

These documents contain slide decks presented at the Physical Characterization of Smart and Grid-Connected Commercial and Residential Buildings End-Use Equipment and Appliances public meeting held on April 30, 2014.

312

Building America Technology Solutions for New and Existing Homes: Optimizing Hydronic System Performance in Residential Applications (Fact Sheet)  

Broader source: Energy.gov [DOE]

In this project, researchers from the Consortium for Advanced Residential Buildings team worked with industry partners to develop hydronic system designs that would address performance issues and result in higher overall system efficiencies and improved response times.

313

Impact of Different Glazing Systems on Cooling Load of a Detached Residential Building at Bhubaneswar, India  

E-Print Network [OSTI]

assuming north?south and east?west facings of the building. For each orientation, different types of glazing (Table 4) and different glazing areas are considered. The first case(the base case) assumes a single clear glazing with a window-to-wall ratio.... Floor plan of the east-west oriented residential building taken for study (not to scale) Table 1. The zones basic characteristics Zone Area (m2) Volume (m3) Occupancy (people/m2) Venti- lation (l/s) HVAC system Bed room1 15.12 52...

Sahoo, P. K.; Sahoo, R.

2010-01-01T23:59:59.000Z

314

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings  

E-Print Network [OSTI]

U.S. Residential Electricity Consumption by End Use. 2011a [average residential electricity consumption by end-use inaverage residential electricity consumption by end-use in

Garbesi, Karina

2012-01-01T23:59:59.000Z

315

Buildings Energy Data Book: 2.2 Residential Sector Characteristics  

Buildings Energy Data Book [EERE]

1 1 Total Number of Households and Buildings, Floorspace, and Household Size, by Year 1980 80 N.A. 227 2.9 1981 83 N.A. 229 2.8 1982 84 N.A. 232 2.8 1983 85 N.A. 234 2.8 1984 86 N.A. 236 2.7 1985 88 N.A. 238 2.7 1986 89 N.A. 240 2.7 1987 91 N.A. 242 2.7 1988 92 N.A. 244 2.7 1989 93 N.A. 247 2.6 1990 94 N.A. 250 2.6 1991 95 N.A. 253 2.7 1992 96 N.A. 257 2.7 1993 98 N.A. 260 2.7 1994 99 N.A. 263 2.7 1995 100 N.A. 266 2.7 1996 101 N.A. 269 2.7 1997 102 N.A. 273 2.7 1998 104 N.A. 276 2.7 1999 105 N.A. 279 2.7 2000 106 N.A. 282 2.7 2001 107 2% 285 2.7 2002 105 3% 288 2.7 2003 106 5% 290 2.8 2004 107 7% 293 2.7 2005 109 9% 296 2.7 2006 110 11% 299 2.7 2007 110 12% 302 2.7 2008 111 13% 304 2.8 2009 111 13% 307 2.8 2010 114 14% 310 2.7 2011 115 14% 313 2.7 2012 116 15% 316 2.7 2013 117 16% 319 2.7 2014 118 17% 322 2.7 2015 119 18% 326 2.7 2016 120 19% 329 2.7 2017 122 21% 332 2.7 2018 123 22% 335 2.7 2019 125 23% 338 2.7 2020 126 25% 341 2.7 2021 127 26% 345

316

Modelling the impacts of building regulations and a property bubble on residential space and water heating  

Science Journals Connector (OSTI)

This paper develops a bottom-up model of space and water heating energy demand for new build dwellings in the Irish residential sector. This is used to assess the impacts of measures proposed in Ireland's National Energy Efficiency Action Plan (NEEAP). The impact of the housing construction boom, which resulted in 23% of occupied dwellings in 2008 having been built since 2002, and the subsequent bust, are also assessed. The model structure treats separately new dwellings added to the stock after 2007 and pre-existing occupied dwellings. The former is modelled as a set of archetype dwellings with energy end use affected by the relevant set of building regulations that apply during construction. Energy demand of existing dwellings is predicted by a simpler top down method based on historical energy use trends. The baseline scenario suggests residential energy demand will grow by 19% from 3206 ktoe in 2007 to 3810 ktoe in 2020. The results indicate that 2008 and 2010 building regulations will lead to energy savings of 305 ktoe (8.0%) in 2020. Had the 2008 building regulations been introduced in 2002, at the start of the boom, there would be additional savings of 238 ktoe (6.7%) in 2020.

D. Dineen; B.P. Ó Gallachóir

2011-01-01T23:59:59.000Z

317

Residential | OpenEI  

Open Energy Info (EERE)

Residential Residential Dataset Summary Description This dataset contains hourly load profile data for 16 commercial building types (based off the DOE commercial reference building models) and residential buildings (based off the Building America House Simulation Protocols). This dataset also includes the Residential Energy Consumption Survey (RECS) for statistical references of building types by location. Source Commercial and Residential Reference Building Models Date Released April 18th, 2013 (7 months ago) Date Updated July 02nd, 2013 (5 months ago) Keywords building building demand building load Commercial data demand Energy Consumption energy data hourly kWh load profiles Residential Data Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage

318

Assessment of Cost-optimal Energy Performance Requirements for the Italian Residential Building Stock  

Science Journals Connector (OSTI)

Abstract Directive 2010/31/EU establishes that Member States must ensure that minimum energy performance requirements for buildings are set with a view to achieve cost-optimal levels. The paper presents a methodology for identifying the cost-optimal levels for the Italian residential building stock, following the Guidelines accompanying the Commission Delegated Regulation No. 244/2012. The methodology is applied to a reference building of the IEE-TABULA project and considering different energy efficiency measures. The energy performance and the global cost calculations are performed according to UNI/TS 11300 and UNI EN 15459, respectively. A new cost optimisation procedure based on a sequential search-optimisation technique considering discrete options is applied.

Vincenzo Corrado; Ilaria Ballarini; Simona Paduos

2014-01-01T23:59:59.000Z

319

Berkshire Gas - Residential Energy Efficiency Rebate Program | Department  

Broader source: Energy.gov (indexed) [DOE]

Berkshire Gas - Residential Energy Efficiency Rebate Program Berkshire Gas - Residential Energy Efficiency Rebate Program Berkshire Gas - Residential Energy Efficiency Rebate Program < Back Eligibility Low-Income Residential Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Other Sealing Your Home Ventilation Construction Manufacturing Appliances & Electronics Water Heating Windows, Doors, & Skylights Maximum Rebate Weatherization: $2,000 Program Info State Massachusetts Program Type Utility Rebate Program Rebate Amount Weatherization - Single Family: 75% of cost Weatherization - Multi-Family: 50% of cost Weatherization - Low-Income: 100% of cost Furnaces: $500 - $800 Boilers: $1,000 - $1,500 Combined Boiler/Water Heater: $1,200

320

International Energy Agency Implementing Agreements and Annexes: A Guide for Building Technologies Program Managers  

E-Print Network [OSTI]

particularly for multi- family buildings. The United Statesprimarily on multi-story buildings, not single-family homes.

Evans, Meredydd

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings Title Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings Publication Type Report LBNL Report Number LBNL-5193E Year of Publication 2011 Authors Garbesi, Karina, Vagelis Vossos, Alan H. Sanstad, and Gabriel Burch Document Number LBNL-5193E Pagination 59 Date Published October Publisher Lawrence Berkeley National Laboratory City Berkeley Abstract An increasing number of energy efficient appliances operate on direct current (DC) internally, offering the potential to use DC from renewable energy systems directly and avoiding the losses inherent in converting power to alternating current (AC) and back. This paper investigates that potential for net-metered residences with on-site photovoltaics (PV) by modeling the net power draw of the 'direct-DC house' with respect to today's typical configuration, assuming identical DC-internal loads. Power draws were modeled for houses in 14 U.S. cities, using hourly, simulated PV-system output and residential loads. The latter were adjusted to reflect a 33% load reduction, representative of the most efficient DC-internal technology, based on an analysis of 32 electricity end-uses. The model tested the effect of climate, electric vehicle (EV) loads, electricity storage, and load shifting on electricity savings; a sensitivity analysis was conducted to determine how future changes in the efficiencies of power system components might affect savings potential. Based on this work, we estimate that net-metered PV residences could save 5% of their total electricity load for houses without storage and 14% for houses with storage. Based on residential PV penetration projections for year 2035 obtained from the National Energy Modeling System (2.7% for the reference case and 11.2% for the extended policy case), direct-DC could save the nation 10 trillion Btu (without storage) or 40 trillion Btu (with storage). Shifting the cooling load by two hours earlier in the day (pre-cooling) has negligible benefits for energy savings. Direct-DC provides no energy savings benefits for EV charging, to the extent that charging occurs at night. However, if charging occurred during the day, for example with employees charging while at work, the benefits would be large. Direct-DC energy savings are sensitive to power system and appliance conversion efficiencies but are not significantly influenced by climate. While direct-DC for residential applications will most likely arise as a spin-off of developments in the commercial sector-because of lower barriers to market entry and larger energy benefits resulting from the higher coincidence between load and insolation-this paper demonstrates that there are substantial benefits in the residential sector as well. Among residential applications, space cooling derives the largest energy savings from being delivered by a direct-DC system. It is the largest load for the average residence on a national basis and is particularly so in high-load regions. It is also the load with highest solar coincidence.

322

EA-1926: Energy Efficiency Design Standards for New Federal Low-Rise Residential Buildings (RIN# 1904-AC61)  

Broader source: Energy.gov [DOE]

This EA will evaluate the potential environmental impacts of implementing the provisions in the Energy Conservation and Production Act (ECPA) that require DOE to update the baseline Federal energy efficiency performance standards for the construction of new Federal buildings, including low-rise residential buildings.

323

N. Mariana Islands - Building Energy Code | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

N. Mariana Islands - Building Energy Code N. Mariana Islands - Building Energy Code N. Mariana Islands - Building Energy Code < Back Eligibility Commercial Multi-Family Residential Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Program Info Program Type Building Energy Code Provider Department of Public Works ''Much of the information presented in this summary is drawn from the U.S. Department of Energy's (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more detailed information about building energy codes, visit the [http://www.energycodes.gov/states/ DOE] and [http://bcap-ocean.org/ BCAP] web sites.'' Building codes for the Commonwealth of the Northern Mariana Islands (CNMI)

324

Agenda for Public Meeting on the Physical Characterization of Grid-Connected Commercial and Residential Buildings End-Use Equipment and Appliances  

Broader source: Energy.gov [DOE]

Download the agenda below for the July 11 Public Meeting on the Physical Characterization of Grid-Connected Commercial and  Residential Buildings End-Use Equipment and Appliances.

325

13 - Micro combined heat and power (CHP) systems for residential and small commercial buildings  

Science Journals Connector (OSTI)

Abstract: The principal market for micro-CHP is as a replacement for gas boilers in the 18 million or so existing homes in the UK currently provided with gas-fired central heating systems. In addition there are a significant number of potential applications of micro-CHP in small commercial and residential buildings. In order to gain the optimum benefit from micro-CHP, it is essential to ensure that an appropriate technology is selected to integrate with the energy systems of the building. This chapter describes the key characteristics of the leading micro-CHP technologies, external and internal combustion engines and fuel cells, and how these align with the relevant applications.

J. Harrison

2011-01-01T23:59:59.000Z

326

Monitoring energy reduction through applying green roofs to residential buildings in Dubai  

Science Journals Connector (OSTI)

Green roofing in a building has many advantages including absorbing rainwater, providing thermal insulation, enhancing the ecology, creating a peaceful retreat for people and animals, improving air quality and helping to offset the air temperature and heat island effect. The aim of this paper is to monitor energy saving in the residential buildings of Dubai after applying green roofing techniques. The paper also attempts to provide a thermal analysis after the application of green roofs. A villa in Dubai was chosen as a case study. With the aid of energy simulation software, namely DesignBuilder, as well as manual recording and calculations, the energy savings after applying the green roofing were detected. To that extent, the paper draws some recommendations with regard to the types of green roofing that should be used in these particular climatic conditions based on this real experiment that took place over a one year period.

Hanan Taleb

2014-01-01T23:59:59.000Z

327

Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Cold Climates  

SciTech Connect (OSTI)

The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in Cold Climates on a cost-neutral basis.

Building Industry Research Alliance (BIRA); Building Science Consortium (BSC); Consortium for Advanced Residential Buildings (CARB); Florida Solar Energy Center (FSEC); IBACOS; National Renewable Energy Laboratory (NREL)

2006-08-01T23:59:59.000Z

328

Stochastic model for electrical loads in Mediterranean residential buildings: Validation and applications  

Science Journals Connector (OSTI)

Abstract A major issue in modelling the electrical load of residential building is reproducing the variability between dwellings due to the stochastic use of different electrical equipment. In that sense and with the objective to reproduce this variability, a stochastic model to obtain load profiles of household electricity is developed. The model is based on a probabilistic approach and is developed using data from the Mediterranean region of Spain. A detailed validation of the model has been done, analysing and comparing the results with Spanish and European data. The results of the validation show that the model is able to reproduce the most important features of the residential electrical consumption, especially the particularities of the Mediterranean countries. The final part of the paper is focused on the potential applications of the models, and some examples are proposed. The model is useful to simulate a cluster of buildings or individual households. The model allows obtaining synthetic profiles representing the most important characteristics of the mean dwelling, by means of a stochastic approach. The inputs of the proposed model are adapted to energy labelling information of the electric devices. An example case is presented considering a dwelling with high performance equipment.

Joana Ortiz; Francesco Guarino; Jaume Salom; Cristina Corchero; Maurizio Cellura

2014-01-01T23:59:59.000Z

329

The effect of an enclosure retrofit on air leakage rates for a multi-unit residential case-study building  

Science Journals Connector (OSTI)

Abstract This paper presents a relatively new, simple and robust, method for air leakage testing. A thirteen-story multi-unit residential building was tested for air leakage before and after an enclosure retrofit. The building suites had a pre-retrofit NLA50 average of 6.77 cm2/m2 and an average post-retrofit NLA50 of 2.82 cm2/m2—a 58% betterment. The effect of the retrofit on air leakage rates was assessed and compared to other multi-unit residential buildings across Canada and USA. The case study building was significantly tighter than other multi-unit residential buildings included in published studies. Recommendations were made for field-testing procedures in order to maximize the potential for accurate measured flow characteristics. Field-testing for air-tightness needs to be standardized in order for useful comparative results to be generated in order to inform future research and operational considerations for the multi-unit residential building stock across North America.

Robin Urquhart; Russell Richman; Graham Finch

2015-01-01T23:59:59.000Z

330

Howard County - High Performance and Green Building Property Tax Credits |  

Broader source: Energy.gov (indexed) [DOE]

Howard County - High Performance and Green Building Property Tax Howard County - High Performance and Green Building Property Tax Credits Howard County - High Performance and Green Building Property Tax Credits < Back Eligibility Commercial Multi-Family Residential Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Bioenergy Solar Lighting Windows, Doors, & Skylights Heating Buying & Making Electricity Water Water Heating Wind Maximum Rebate High Performance Buildings: none specified High Performance R-2, R-3 Buildings: $5,000 per building or owner-occupied unit Green Buildings (w/energy conservation devices): limited to assessed property taxes on the structure Program Info Start Date 07/01/2008 State Maryland

331

Local Option - Property Tax Assessment for Energy Efficient Buildings |  

Broader source: Energy.gov (indexed) [DOE]

Local Option - Property Tax Assessment for Energy Efficient Local Option - Property Tax Assessment for Energy Efficient Buildings Local Option - Property Tax Assessment for Energy Efficient Buildings < Back Eligibility Agricultural Commercial Industrial Institutional Low-Income Residential Multi-Family Residential Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Program Info State Virginia Program Type Property Tax Incentive Provider Virginia Department of Taxation In March 2008, Virginia enacted legislation that would allow local jurisdictions to assess the property tax of energy efficient buildings at a reduced rate. Under this law, eligible energy-efficient buildings, not including the real property on which they are located, may be considered a

332

Hydronic Controls Retrofits for Low-Rise Multi-Famiy Buildings  

Broader source: Energy.gov (indexed) [DOE]

Residential Integrated Energy Solutions Residential Integrated Energy Solutions Building America Stakeholder Meeting Austin, Texas February 29 to March 2, 2012 Hugh Henderson, CDH Energy Corp. Jordan Dentz, The Levy Partnership, Inc. Hydronic Controls Retrofits for Low-Rise Multi-Family Buildings Research Objective * Determine the impact of control strategies that use apartment temperatures for central boiler control on energy consumption, comfort and cost. * Compare energy performance, comfort and cost to individual radiator valve controls in each apartment. Background * Most multi-family boiler systems have: - No zone/apartment level control, or - Non-electric thermostats on radiator valves * Central boiler system resets hot water based on outdoor temperature * Problem: - apartments are often too hot or too cold.

333

Building America Technology Solutions for New and Existing Homes: Optimizing Hydronic System Performance in Residential Applications, Ithaca, New York (Fact Sheet)  

Broader source: Energy.gov [DOE]

In this project, researchers from Building America team Consortium for Advanced Residential Buildings worked with industry partners to develop hydronic system designs that would address barriers and result in higher overall system efficiencies and improved response times.

334

Alameda Municipal Power - Residential Energy Efficiency Program |  

Broader source: Energy.gov (indexed) [DOE]

Residential Energy Efficiency Program Residential Energy Efficiency Program Alameda Municipal Power - Residential Energy Efficiency Program < Back Eligibility Low-Income Residential Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Sealing Your Home Heating & Cooling Construction Commercial Heating & Cooling Design & Remodeling Maximum Rebate Single family, duplex, or triplex: $960 per unit Multi-family dwelling (four or more units): $480 per unit. Program Info State California Program Type Utility Grant Program Rebate Amount Weatherization: 80% of the cost Do-It-Yourself Weatherization: 70% of the cost Provider Alameda Municipal Power Alameda Municipal Power (AMP) offers a grant to help its residential customers who have electric heat weatherize homes to increase efficiency.

335

Buildings Energy Data Book  

Buildings Energy Data Book [EERE]

2.1 Residential Sector Energy Consumption 2.1 Residential Sector Energy Consumption 2.2 Residential Sector Characteristics 2.3 Residential Sector Expenditures 2.4 Residential Environmental Data 2.5 Residential Construction and Housing Market 2.6 Residential Home Improvements 2.7 Multi-Family Housing 2.8 Industrialized Housing 2.9 Low-Income Housing 3Commercial Sector 4Federal Sector 5Envelope and Equipment 6Energy Supply 7Laws, Energy Codes, and Standards 8Water 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy Transportation Energy Power Technologies Hydrogen Download the Entire Book Skip down to the tables Chapter 2 focuses on energy use in the U.S. residential buildings sector. Section 2.1 provides data on energy consumption by fuel type and end use, as well as energy consumption intensities for different housing categories. Section 2.2 presents characteristics of average households and changes in the U.S. housing stock over time. Sections 2.3 and 2.4 address energy-related expenditures and residential sector emissions, respectively. Section 2.5 contains statistics on housing construction, existing home sales, and mortgages. Section 2.6 presents data on home improvement spending and trends. Section 2.7 describes the industrialized housing industry, including the top manufacturers of various manufactured home products. Section 2.8 presents information on low-income housing and Federal weatherization programs. The main points from this chapter are summarized below:

336

Assessing and Improving the Accuracy of Energy Analysis for Residential Buildings  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Assessing and Improving the Assessing and Improving the Accuracy of Energy Analysis for Residential Buildings B. Polly, N. Kruis, and D. Roberts July 2011 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation,

337

Window-Related Energy Consumption in the US Residential and Commercial Building Stock  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Window-Related Energy Consumption in the US Window-Related Energy Consumption in the US Residential and Commercial Building Stock Joshua Apte and Dariush Arasteh, Lawrence Berkeley National Laboratory LBNL-60146 Abstract We present a simple spreadsheet-based tool for estimating window-related energy consumption in the United States. Using available data on the properties of the installed US window stock, we estimate that windows are responsible for 2.15 quadrillion Btu (Quads) of heating energy consumption and 1.48 Quads of cooling energy consumption annually. We develop estimates of average U-factor and SHGC for current window sales. We estimate that a complete replacement of the installed window stock with these products would result in energy savings of approximately 1.2 quads. We demonstrate

338

Discussion on Energy-Efficient Technology for the Reconstruction of Residential Buildings in Cold Areas  

E-Print Network [OSTI]

to wall is 0.33 in south, 0.30 in north, 0.05 in east and 0.03 in west. The heat transfer coefficient of roof is 1.26 W/m2?K and the area is 1028.5m2. The ICEBO2006, Shenzhen, China Building Commissioning for Energy Efficiency and Comfort, Vol. VI-5...-1 ) heat transfer coefficient of external wall is 1.57 W/m2?K and the area is 3002.67 m2. The heat transfer coefficient of external window is 6.4 W/m2?K and the area is 908.64 m2. 2.2 Design Heating Load The design heating load of residential...

Zhao, J.; Wang, S.; Chen, H.; Shi, Y.; Li, D.

2006-01-01T23:59:59.000Z

339

Development and validation of regression models to predict monthly heating demand for residential buildings  

Science Journals Connector (OSTI)

The present research work concerns development of regression models to predict the monthly heating demand for single-family residential sector in temperate climates, with the aim to be used by architects or design engineers as support tools in the very first stage of their projects in finding efficiently energetic solutions. Another interest to use such simplified models is to make it possible a very quick parametric study in order to optimize the building structure versus environmental or economic criteria. All the energy prediction models were based on an extended database obtained by dynamic simulations for 16 major cities of France. The inputs for the regression models are the building shape factor, the building envelope U-value, the window to floor area ratio, the building time constant and the climate which is defined as function of the sol-air temperature and heating set-point. If the neural network (NN) methods could give precise representations in predicting energy use, with the advantage that they are capable of adjusting themselves to unexpected pattern changes in the incoming data, the multiple regression analysis was also found to be an efficient method, nevertheless with the requirement that an extended database should be used for the regression. The validation is probably the most important level when trying to find prediction models, so 270 different scenarios are analysed in this research work for different inputs of the models. It has been established that the energy equations obtained can do predictions quite well, a maximum deviation between the predicted and the simulated is noticed to be 5.1% for Nice climate, with an average error of 2%. In this paper, we also show that is possible to predict the building heating demand even for more complex scenarios, when the construction is adjacent to non-heated spaces, basements or roof attics.

Tiberiu Catalina; Joseph Virgone; Eric Blanco

2008-01-01T23:59:59.000Z

340

Rural Development Multi-Family Housing Energy Efficiency Initiative  

Broader source: Energy.gov [DOE]

In order to help create a more energy independent rural America for the next century, the USDA Rural Development Multi-Family Housing Energy Efficiency Initiative enables applicants to several USDA...

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Assessing the sustainability of the energy use of residential buildings in Belgrade through multi-criteria analysis  

Science Journals Connector (OSTI)

Abstract The paper presents a method for selecting and calculation indicators of sustainable development, needed for determining the level of sustainable development, expressed through sustainability index of residential buildings. It is important to verify procedure for determining economic, social and environmental sub-indicators based on consumption of final energy (used to meet space heating, hot water generation and household cooking needs, as well as for operation of various household electrical appliances, indoor temperature and humidity). It was done for representative sample of Belgrade buildings stock. Different dwelling types constructed in two different periods and heated by electricity, district heating and fossil fuels were analysed. Multi-criteria analysis was used to evaluate residential buildings sustainability. The results showed that the best building options, constructed in the period 1981–2006, are: the apartment buildings and single family houses (electricity for space heating) when economy indicator has priority; the apartments connected to the district heating system when environmental indicator has priority; and single family houses connected to the district heating system when social indicator has priority. Implementation of proposed methodology is beneficial when evaluating and comparing sustainability of different residential buildings, enabling decision makers to more easily reach decisions on the issues related to energy policy and environmental protection.

Biljana Vu?i?evi?; Marina Jovanovi?; Naim Afgan; Valentina Turanjanin

2014-01-01T23:59:59.000Z

342

Building America Technology Solutions for New and Existing Homes: Steam System Balancing and Tuning for Multifamily Residential Buildings, Chicago, Illinois (Fact Sheet)  

Broader source: Energy.gov [DOE]

The Partnership for Advanced Residential Retrofit (PARR), a U.S. Department of Energy Building America team, conducted a study to identify best practices, costs, and savings associated with balancing steam distribution systems through increased main line air venting, radiator vent replacement, and boiler control system upgrades.

343

Consumers Energy (Electric) - Residential Energy Efficiency Program |  

Broader source: Energy.gov (indexed) [DOE]

Electric) - Residential Energy Efficiency Program Electric) - Residential Energy Efficiency Program Consumers Energy (Electric) - Residential Energy Efficiency Program < Back Eligibility Low-Income Residential Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Sealing Your Home Heating & Cooling Commercial Heating & Cooling Cooling Ventilation Manufacturing Heat Pumps Appliances & Electronics Commercial Lighting Lighting Maximum Rebate Home Performance Comprehensive Assessment and Installations: $3500 Insulation: $1,025 Windows: $250 Program Info State Michigan Program Type Utility Rebate Program Rebate Amount CFL Lighting: Retailer Instant Discount Programmable Thermostat: $10 Central A/C and Heat Pumps: $150 - $250 Central A/C Tune up: $50 Ground Source Heat Pump: $200-$300

344

A methodology to assess energy-demand savings and cost effectiveness of retrofitting in existing Swedish residential buildings  

Science Journals Connector (OSTI)

Abstract Swedish residential buildings are typically retrofitted on a case-by-case basis. Large numbers of building consultants are involved in the decision-making, and stakeholders find it difficult to quantify the sustainable profits from retrofits and to make an efficient selection of the optimal alternative. The present paper presents an approach to design and assess energy-demand retrofitting scenarios. This aims to contribute to retrofitting decision-making regarding the main archetypes of existing Swedish residential buildings and to the evaluation of their long-term cost effectiveness. The approach combines energy-demand modeling and retrofit option rankings with life-cycle cost analysis (LCCA). Four types of typical Swedish residential buildings are used to demonstrate the model. Retrofits in the archetypes are defined, analyzed and ranked to indicate the long-term energy savings and economic profits. The model indicates that the energy saving potential of retrofitting is 36–54% in the archetypes. However, retrofits with the largest energy-saving potential are not always the most cost effective. The long-term profits of retrofitting are largely dominated by the building types. The finding can contribute to the standardization of future retrofitting designs on municipality scale in Sweden.

Qian Wang; Sture Holmberg

2015-01-01T23:59:59.000Z

345

Philadelphia Gas Works - Residential and Commercial Construction Incentives  

Broader source: Energy.gov (indexed) [DOE]

Philadelphia Gas Works - Residential and Commercial Construction Philadelphia Gas Works - Residential and Commercial Construction Incentives Program (Pennsylvania) Philadelphia Gas Works - Residential and Commercial Construction Incentives Program (Pennsylvania) < Back Eligibility Commercial Industrial Multi-Family Residential Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Maximum Rebate Residential: $750 Commercial: $60,000 Program Info Start Date 9/1/2012 Expiration Date 8/31/2015 State Pennsylvania Program Type Utility Rebate Program Rebate Amount '''Residential''' Residential Construction: $750 '''Commercial/Industrial''' 10% to 20% to 30% above code, $40/MMBtu first-year savings Philadelphia Gas Works (PGW) provides incentives to developers, home

346

Evaluation of Automated Model Calibration Techniques for Residential Building Energy Simulation  

SciTech Connect (OSTI)

This simulation study adapts and applies the general framework described in BESTEST-EX (Judkoff et al 2010) for self-testing residential building energy model calibration methods. BEopt/DOE-2.2 is used to evaluate four mathematical calibration methods in the context of monthly, daily, and hourly synthetic utility data for a 1960's-era existing home in a cooling-dominated climate. The home's model inputs are assigned probability distributions representing uncertainty ranges, random selections are made from the uncertainty ranges to define 'explicit' input values, and synthetic utility billing data are generated using the explicit input values. The four calibration methods evaluated in this study are: an ASHRAE 1051-RP-based approach (Reddy and Maor 2006), a simplified simulated annealing optimization approach, a regression metamodeling optimization approach, and a simple output ratio calibration approach. The calibration methods are evaluated for monthly, daily, and hourly cases; various retrofit measures are applied to the calibrated models and the methods are evaluated based on the accuracy of predicted savings, computational cost, repeatability, automation, and ease of implementation.

Robertson, J.; Polly, B.; Collis, J.

2013-09-01T23:59:59.000Z

347

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings  

E-Print Network [OSTI]

plausible future penetration rates for residential PVefficiencies and penetration rates. A subset of outputs areof localized high penetration rates, but the lack of a sound

Garbesi, Karina

2012-01-01T23:59:59.000Z

348

Demand response-enabled autonomous control for interior space conditioning in residential buildings.  

E-Print Network [OSTI]

Demand Response Autonomous Controlssystem under the context of demand response for residential10] E. Arens et al. , Demand response enabling technology

Chen, Xue

2008-01-01T23:59:59.000Z

349

Residential building solar thermal analysis| A case study on Sophia Gordon Hall.  

E-Print Network [OSTI]

?? Solar thermal technologies, such as residential hot water heating and space conditioning, have potential for reducing green house gas emissions and fossil fuel consumption.… (more)

Trethewey, Ross M.

2010-01-01T23:59:59.000Z

350

Smart Operation of Centralized Temperature Control System in Multi-Unit Residential Buildings.  

E-Print Network [OSTI]

??Smart Grid has emerged a very important concept in modern power systems. The integration of different loads such as residential, commercial and industrial into the… (more)

Kundu, Rajib

2013-01-01T23:59:59.000Z

351

Optimizing Hydronic System Performance in Residential Applications, Ithaca, New York (Fact Sheet), Building America Case Study: Technology Solutions for New and Existing Homes, Building Technologies Office (BTO)  

Broader source: Energy.gov (indexed) [DOE]

Optimizing Hydronic Optimizing Hydronic System Performance in Residential Applications Ithaca, New York PROJECT INFORMATION Project Name: Condensing Boiler Optimization Location: Ithaca, NY Partners: Ithaca Neighborhood Housing Services, www.ithacanhs.org; Appropriate Designs, www.hydronicpros.com; HTP, www.htproducts.com; Peerless, www.peerlessboilers.com; Grundfos, us.grundfos.com; Bell & Gossett, www.bell-gossett.com; Emerson Swan, www.emersonswan.com. Consortium for Advanced Residential Buildings, www.carb-swa.com Building Component: Space heating, water heating Application: New; single and multifamily Year Tested: 2012-2013 Applicable Climate Zone(s): 4,5,6,7 PERFORMANCE DATA Cost of Energy Efficiency Measure (including labor): $6,100-$8,200 Projected Energy Savings:

352

Residential Retrofit Program Design Guide  

Broader source: Energy.gov [DOE]

This Residential Retrofit Program Design Guide focuses on the key elements and design characteristics of building and maintaining a successful residential retrofit program.

353

2014-04-30 Public Meeting Agenda: Physical Characterization of Smart and Grid-Connected Commercial and Residential Buildings End-Use Equipment and Appliances  

Broader source: Energy.gov [DOE]

This document is the agenda for the Physical Characterization of Smart and Grid-Connected Commercial and Residential Buildings End-Use Equipment and Appliances public meeting being held on April 30, 2014.

354

RESOURCES FOR OUTDOOR WATER USE DETERMINATION  

E-Print Network [OSTI]

residential units in multi-family buildings three stories oror residential units in multi-family buildings, includingbuildings and agricultural sites as well as single- and multi-family

Melody, Moya

2014-01-01T23:59:59.000Z

355

OpenEI - Residential  

Open Energy Info (EERE)

Commercial and Commercial and Residential Hourly Load Profiles for all TMY3 Locations in the United States http://en.openei.org/datasets/node/961 This dataset contains hourly load profile data for 16 commercial building types (based off the buildings/commercial/ref_buildings.html">DOE commercial reference building models) and residential buildings (based off the Building America House Simulation Protocols).  This dataset also includes the residential/">Residential Energy Consumption Survey (RECS) for statistical references of building types

356

City of Detroit - SmartBuildings Detroit Grant Program | Department of  

Broader source: Energy.gov (indexed) [DOE]

City of Detroit - SmartBuildings Detroit Grant Program City of Detroit - SmartBuildings Detroit Grant Program City of Detroit - SmartBuildings Detroit Grant Program < Back Eligibility Commercial Institutional Local Government Multi-Family Residential State Government Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Sealing Your Home Cooling Other Design & Remodeling Windows, Doors, & Skylights Heat Pumps Appliances & Electronics Commercial Lighting Lighting Insulation Water Buying & Making Electricity Solar Water Heating Wind Maximum Rebate 25% of eligible costs Program Info Expiration Date 06/02/2013 State Michigan Program Type Local Grant Program Provider City of Detroit '''''Note: This program is no longer accepting applications. Check the

357

Energy Optimization (Electric) - Residential Efficiency Program |  

Broader source: Energy.gov (indexed) [DOE]

Energy Optimization (Electric) - Residential Efficiency Program Energy Optimization (Electric) - Residential Efficiency Program Energy Optimization (Electric) - Residential Efficiency Program < Back Eligibility Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Cooling Commercial Heating & Cooling Appliances & Electronics Heat Pumps Commercial Lighting Lighting Water Heating Windows, Doors, & Skylights Maximum Rebate Ceiling Fans: 4 Smart Power Strip: 2 Pipe Wrap: 10 ln. ft. CFL Bulbs: 12 Refrigerator Recycling: 2 Program Info State Michigan Program Type Utility Rebate Program Rebate Amount CFL Bulbs: Varies by retailer Ceiling Fan: $15 CFL Fixture: $15 LED Fixture/Downlight Kit: $20 LED Light Bulbs: $10 Smart Power Strip: $20 Room Air Conditioners: $20

358

Empire District Electric - Residential Energy Efficiency Rebate |  

Broader source: Energy.gov (indexed) [DOE]

Empire District Electric - Residential Energy Efficiency Rebate Empire District Electric - Residential Energy Efficiency Rebate Empire District Electric - Residential Energy Efficiency Rebate < Back Eligibility Construction Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Sealing Your Home Heating & Cooling Commercial Heating & Cooling Cooling Appliances & Electronics Construction Design & Remodeling Other Ventilation Water Heating Windows, Doors, & Skylights Program Info State Missouri Program Type Utility Rebate Program Rebate Amount ENERGY STAR Home Performance Retrofit: 400 ENERGY STAR Qualified Home Designation: 800 Air Conditioner: 400 - 500; varies depending on SEER rating Provider Empire District Electric Company The Empire District Electric Company offers rebates for customers who

359

Global warming implications of facade parameters: A life cycle assessment of residential buildings in Bahrain  

SciTech Connect (OSTI)

On a global scale, the Gulf Corporation Council Countries (GCCC), including Bahrain, are amongst the top countries in terms of carbon dioxide emissions per capita. Building authority in Bahrain has set a target of 40% reduction of electricity consumption and associated CO{sub 2} emissions to be achieved by using facade parameters. This work evaluates how the life cycle CO{sub 2} emissions of buildings are affected by facade parameters. The main focus is placed on direct and indirect CO{sub 2} emissions from three contributors, namely, chemical reactions during production processes (Pco{sub 2}), embodied energy (Eco{sub 2}) and operational energy (OPco{sub 2}). By means of the life cycle assessment (LCA) methodology, it has been possible to show that the greatest environmental impact occurs during the operational phase (80-90%). However, embodied CO{sub 2} emissions are an important factor that needs to be brought into the systems used for appraisal of projects, and hence into the design decisions made in developing projects. The assessment shows that masonry blocks are responsible for 70-90% of the total CO{sub 2} emissions of facade construction, mainly due to their physical characteristics. The highest Pco{sub 2} emissions factors are those of window elements, particularly aluminium frames. However, their contribution of CO{sub 2} emissions depends largely on the number and size of windows. Each square metre of glazing is able to increase the total CO{sub 2} emissions by almost 30% when compared with the same areas of opaque walls. The use of autoclaved aerated concrete (AAC) walls reduces the total life cycle CO{sub 2} emissions by almost 5.2% when compared with ordinary walls, while the use of thermal insulation with concrete wall reduces CO{sub 2} emissions by 1.2%. The outcome of this work offers to the building industry a reliable indicator of the environmental impact of residential facade parameters. - Highlights: Black-Right-Pointing-Pointer Life cycle carbon assessment of facade parameters. Black-Right-Pointing-Pointer Greatest environmental impact occurs during the operational phase. Black-Right-Pointing-Pointer Masonry blocks are responsible for 70-90% of the total CO2 emissions of facade construction. Black-Right-Pointing-Pointer Window contribution of CO2 emissions depends on the number and size of windows. Black-Right-Pointing-Pointer Without insulation, AAC walls offer more savings in CO2 emissions.

Radhi, Hassan, E-mail: h_alradhi@yahoo.com [Global Engineering Bureau, P.O Box 33130, Manama, Kingdom of Bahrain (Bahrain); Sharples, Stephen, E-mail: steve.sharples@liverpool.ac.uk [School of Architecture, University of Liverpool (United Kingdom)

2013-01-15T23:59:59.000Z

360

National Grid (Electric) - Residential Energy Efficiency Rebate Programs  

Broader source: Energy.gov (indexed) [DOE]

National Grid (Electric) - Residential Energy Efficiency Rebate National Grid (Electric) - Residential Energy Efficiency Rebate Programs (Upstate New York) National Grid (Electric) - Residential Energy Efficiency Rebate Programs (Upstate New York) < Back Eligibility Installer/Contractor Multi-Family Residential Residential Savings Category Other Commercial Weatherization Manufacturing Appliances & Electronics Program Info State New York Program Type Utility Rebate Program Rebate Amount Refrigerator Recycling: $30 Multifamily Energy Evaluation: Free assessment, installation of up to ten CFLs/unit, water efficiency measures, hot water pipe and tank wrap, and a $300 rebate for refrigerator replacement costs. Provider National Grid Residential Upstate Efficiency Programs National Grid residential electric customers in Upstate New York are

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

New Mexico Gas Company - Residential Efficiency Programs | Department of  

Broader source: Energy.gov (indexed) [DOE]

Residential Efficiency Programs Residential Efficiency Programs New Mexico Gas Company - Residential Efficiency Programs < Back Eligibility Construction Low-Income Residential Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Sealing Your Home Heating & Cooling Construction Commercial Heating & Cooling Design & Remodeling Appliances & Electronics Water Heating Maximum Rebate Insulation: $500 Program Info State New Mexico Program Type Utility Rebate Program Rebate Amount ENERGY STAR Qualifying Home: $750 New Mexico Energy$mart Income Qualifying Weatherization: Free Tankless Water Heater: $300 Insulation: 25% of cost up to $500 The New Mexico Gas Company provides incentives for energy saving measures and improvements to residential homes. Rebates are available for adding

362

Dynamic Simulation and Analysis of Factors Impacting the Energy Consumption of Residential Buildings  

E-Print Network [OSTI]

Buildings have a close relationship with climate. There are a lot of important factors that influence building energy consumption such as building shape coefficient, insulation work of building envelope, covered area, and the area ratio of window...

Lian, Y.; Hao, Y.

2006-01-01T23:59:59.000Z

363

Burbank Water and Power - Green Building Incentive Program | Department of  

Broader source: Energy.gov (indexed) [DOE]

Burbank Water and Power - Green Building Incentive Program Burbank Water and Power - Green Building Incentive Program Burbank Water and Power - Green Building Incentive Program < Back Eligibility Commercial Multi-Family Residential Nonprofit Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Bioenergy Solar Lighting Windows, Doors, & Skylights Heating Buying & Making Electricity Water Water Heating Wind Program Info State California Program Type Green Building Incentive Provider Rebates The U.S. Green Building Council is a non-profit organization that promotes the design and construction of buildings that are environmentally responsible, profitable, and healthy places to live and work. The Green Building Council developed the Leadership in Energy and Environmental

364

Envelope-related energy demand: A design indicator of energy performance for residential buildings in early design stages  

Science Journals Connector (OSTI)

The architectural design variables which most influence the energy performance of a building are the envelope materials, shape and window areas. As these start to be defined in the early design stages, designers require simple tools to obtain information about the energy performance of the building for the design variations being considered at this phase. The shape factor is one of those tools, but it fails to correlate with energy demand in the presence of important solar gains. This paper presents a new design indicator of energy performance for residential buildings, the Envelope-Related Energy Demand (ERED), which aims to overcome the shortcomings of the shape factor while maintaining a reasonable simplicity of use. The inputs to ERED are areas of envelope elements (floor, walls, roofs and windows), U-values of envelope materials, solar heat gain coefficients (SHGC) of windows and site related parameters, concerning temperature and solar irradiation. ERED was validated against detailed simulation results of 8000 hypothetical residential buildings, varying in envelope shape, window areas and materials. Results show that there is a strong correlation between ERED and simulated energy demand. These results confirm the adequacy of ERED to assist design decisions in early stages of the design process.

Vasco Granadeiro; João R. Correia; Vítor M.S. Leal; José P. Duarte

2013-01-01T23:59:59.000Z

365

About Residential | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Residential Buildings » About Residential Residential Buildings » About Residential About Residential The Building Technologies Office (BTO) collaborates with home builders, energy professionals, state and local governments, utilities, product manufacturers, educators, and researchers to improve the energy efficiency of both new and existing homes. Residential Sector Activities Include: Demonstrating to builders and remodelers how to build and renovate for high performance through best practice guides and case studies and continuing to developing innovative whole-house energy efficiency solutions through Building America research projects. We also provide guidelines and tools for researchers conducting building related research projects. Promoting a trusted, whole-house process for upgrading existing homes with

366

Where and how much : density scenarios for the residential build-out of Gaoming, China  

E-Print Network [OSTI]

The author will use Gaoming District in the western part of China's Pearl River Delta (PRD) as an opportunity to examine the impact a range of residential densities along planned public transportation corridors can have ...

Hu, Karen Jia Ying

2005-01-01T23:59:59.000Z

367

Laclede Gas Company - Residential High Efficiency Heating Rebate Program |  

Broader source: Energy.gov (indexed) [DOE]

Residential High Efficiency Heating Rebate Residential High Efficiency Heating Rebate Program Laclede Gas Company - Residential High Efficiency Heating Rebate Program < Back Eligibility Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Appliances & Electronics Water Heating Maximum Rebate Heating System: 2 maximum Programmable Thermostats: 2 maximum Multi-Family Property Owners: 50 thermostat rebates, 50 furnace rebates over the life of the program Program Info State Missouri Program Type Utility Rebate Program Rebate Amount Gas Furnace: $150 - $200 Gas Boiler: $150 Programmable Setback Thermostat: $25 Gas Water Heater: $50 - $200 Provider Laclede Gas Company Laclede Gas Company offers various rebates to residential customers for investing in energy efficient equipment and appliances. Residential

368

U.S. Aims for Zero-Energy: Support for PV on New Homes  

E-Print Network [OSTI]

installations on new multi-family buildings Standard PV Buy-multi-family residential construction projects with PV and other green building

Barbose, Galen; Wiser, Ryan; Bolinger, Mark

2006-01-01T23:59:59.000Z

369

Window-Related Energy Consumption in the US Residential and Commercial Building Stock  

E-Print Network [OSTI]

Efficiency and Renewable Energy, Building Technologies, U.S.and Renewable Energy (2005). 2005 Buildings Energy Databook,Buildings Energy Databook Table 1.2.3 (US DOE Office of Energy Efficiency and Renewable

Apte, Joshua; Arasteh, Dariush

2008-01-01T23:59:59.000Z

370

Residential building energy analysis : development and uncertainty assessment of a simplified model  

E-Print Network [OSTI]

Effective design of energy-efficient buildings requires attention to energy issues during the preliminary stages of design. To aid in the early consideration of a building's future energy usage, a simplified building energy ...

Spindler, Henry C. (Henry Carlton), 1970-

1998-01-01T23:59:59.000Z

371

Corrosiveness of wet residential building thermal insulation---Mechanisms and evaluation of electrochemical methods for assessing corrosion behavior  

SciTech Connect (OSTI)

An evaluation has been made of the corrosiveness of selected wet residential building thermal insulation materials in contact with low carbon steel. Investigations were conducted both in wet insulations and in filtered leachates from insulations derived from thirteen cellulosic, three mineral fiber and four foam products. Potentiodynamic polarization measurements are reported from which the overall corrosion response was assessed and then the techniques of Tafel and polarization resistance analysis applied to estimate corrosion rates. Corrosion rates were also estimated electrochemically using a direct reading instrument which performs the rate calculation based on the polarization resistance principle. Direct determinations of corrosion rate were based on weight loss measurements.

Stansbury, E.E. [Stansbury (E.E.), Knoxville, TN (United States)

1991-10-01T23:59:59.000Z

372

Daily life support : building a collective neighborhood  

E-Print Network [OSTI]

Do the house forms and residential neighborhoods commonly found in the U.S. accommodate the present needs and lifestyles of the people who live in them? The single-family detached house and multi-family units like the ...

Hamanaka, Leslie K. (Leslie Kinu)

1990-01-01T23:59:59.000Z

373

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book [EERE]

4 4 Ownership (1) Owned 54.9 104.5 40.3 78% Rented 77.4 71.7 28.4 22% Public Housing 75.7 62.7 28.7 2% Not Public Housing 77.7 73.0 28.4 19% 100% Note(s): Source(s): 1) Energy consumption per square foot was calculated using estimates of average heated floor space per household. According to the 2005 Residential Energy Consumption Survey (RECS), the average heated floor space per household in the U.S. was 1,618 square feet. Average total floor space, which includes garages, attics and unfinished basements, equaled 2,309 square feet. EIA, 2005 Residential Energy Consumption Survey, Oct. 2008 2005 Residential Delivered Energy Consumption Intensities, by Ownership of Unit Per Square Per Household Per Household Percent of Foot (thousand Btu) (million Btu) Members (million Btu) Total Consumption

374

ASHRAE Standard 62.2. Ventilation and Acceptable Indoor Air Quality in Low- Rise Residential Buildings- Building America Top Innovation  

Broader source: Energy.gov [DOE]

This 2014 Top Innovation describes Building America research and support in developing and gaining adoption of ASHRAE 62.2.

375

Unitil - Residential Energy Efficiency Programs | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Unitil - Residential Energy Efficiency Programs Unitil - Residential Energy Efficiency Programs Unitil - Residential Energy Efficiency Programs < Back Eligibility Construction Installer/Contractor Low-Income Residential Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Appliances & Electronics Heating & Cooling Construction Commercial Heating & Cooling Design & Remodeling Other Sealing Your Home Ventilation Commercial Lighting Lighting Cooling Maximum Rebate Home Performance with Energy Star: $4,000 Program Info State New Hampshire Program Type Utility Rebate Program Rebate Amount Home Performance with Energy Star: 50% Clothes Washer: $30 Refrigerator: $30 Room Air Conditioner: $20 Room Purifier: $15 CFLs: In-store discounts Provider Unitil Energy Systems

376

Efficiency United (Gas) - Residential Efficiency Program | Department of  

Broader source: Energy.gov (indexed) [DOE]

Efficiency United (Gas) - Residential Efficiency Program Efficiency United (Gas) - Residential Efficiency Program Efficiency United (Gas) - Residential Efficiency Program < Back Eligibility Low-Income Residential Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Sealing Your Home Appliances & Electronics Construction Design & Remodeling Other Ventilation Manufacturing Water Heating Windows, Doors, & Skylights Maximum Rebate Weatherization Measures: 50% of the cost Windows: $150 Water Heaters/Clothes Washers: 1 Pipe Wrap: Limit of 10 linear ft. Faucet Aerators: 2 High Efficiency Shower Head: 2 Program Info State Michigan Program Type Utility Rebate Program Rebate Amount Boiler: $200 Furnace: $100 - $200

377

Energy Efficiency Fund (Electric and Gas) - Residential New Construction  

Broader source: Energy.gov (indexed) [DOE]

Energy Efficiency Fund (Electric and Gas) - Residential New Energy Efficiency Fund (Electric and Gas) - Residential New Construction Program Energy Efficiency Fund (Electric and Gas) - Residential New Construction Program < Back Eligibility Construction Installer/Contractor Low-Income Residential Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Commercial Heating & Cooling Cooling Construction Design & Remodeling Sealing Your Home Ventilation Heating Heat Pumps Appliances & Electronics Water Heating Maximum Rebate Varies Program Info Funding Source Energy Efficiency Fund State Connecticut Program Type Utility Rebate Program Rebate Amount Varies by technology for prescriptive measures and whether the applicant is seeking ENERGY STAR Certification or Home Energy Rating System (HERS)

378

NYSEG (Electric) - Residential Efficiency Program | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

NYSEG (Electric) - Residential Efficiency Program NYSEG (Electric) - Residential Efficiency Program NYSEG (Electric) - Residential Efficiency Program < Back Eligibility Multi-Family Residential Residential Savings Category Appliances & Electronics Commercial Lighting Lighting Program Info Funding Source System Benefits Charge Start Date 5/1/2011 State New York Program Type Utility Rebate Program Rebate Amount Refrigerator Recycling: $50 rebate and free removal Multifamily Dwelling Units: 6 free CFLS and smart power strips Multifamily Common Area Ligting: 50% off custom lighting upgrades Provider NYSEG/RG&E NYSEG is offering residential electric customers rebates for recycling refrigerators, and its multifamily customers free CFLs, smart power strips and 50% off common area lighting equipment. All equipment requirements must

379

Springfield Utility Board - Residential Energy Efficiency Rebate Program |  

Broader source: Energy.gov (indexed) [DOE]

Springfield Utility Board - Residential Energy Efficiency Rebate Springfield Utility Board - Residential Energy Efficiency Rebate Program Springfield Utility Board - Residential Energy Efficiency Rebate Program < Back Eligibility Low-Income Residential Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Appliances & Electronics Sealing Your Home Ventilation Heating & Cooling Commercial Heating & Cooling Heat Pumps Water Heating Program Info State Oregon Program Type Utility Rebate Program Rebate Amount Refrigerators/Freezers: $25 Electric Water Heaters: $25 Clothes Washers: $30 - $80 Recycle Refrigerator/Freezer: $25 Duct Sealing/Testing: $150 - $400 Heat Pump: $500 Ductless Heat Pump: $1,000 Insulation: 50% (100% for qualified low income customers) Provider Springfield Utility Board

380

Anaheim Public Utilities - Residential Home Efficiency Rebate Program |  

Broader source: Energy.gov (indexed) [DOE]

Residential Home Efficiency Rebate Residential Home Efficiency Rebate Program Anaheim Public Utilities - Residential Home Efficiency Rebate Program < Back Eligibility Low-Income Residential Multi-Family Residential Residential Savings Category Heating & Cooling Cooling Commercial Heating & Cooling Appliances & Electronics Home Weatherization Commercial Weatherization Sealing Your Home Ventilation Manufacturing Commercial Lighting Lighting Windows, Doors, & Skylights Maximum Rebate Air Duct Repair: $300 Ceiling Fan: 3 fans Program Info State California Program Type Utility Rebate Program Rebate Amount Refrigerator: $50 Refrigerator Recycling: $50 Dishwasher: $50 Room A/C: $50 Central A/C: $100/ton High Performance windows: $1/sq ft Air Duct Repair: 50% of repair cost Ceiling Fan: $20 Whole House Fan: $100

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Burbank Water and Power - Residential Energy Efficiency Rebate Program |  

Broader source: Energy.gov (indexed) [DOE]

Residential Energy Efficiency Rebate Residential Energy Efficiency Rebate Program Burbank Water and Power - Residential Energy Efficiency Rebate Program < Back Eligibility Low-Income Residential Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Cooling Commercial Heating & Cooling Appliances & Electronics Sealing Your Home Design & Remodeling Windows, Doors, & Skylights Program Info State California Program Type Utility Rebate Program Rebate Amount Products purchased from a Burbank retailer are typically awarded higher rebates than those purchased outside Burbank. Inside Burbank: Ceiling Fans: $25 (maximum three) Clothes Washer: $50 Dishwasher: $35 Refrigerator/Freezer: $75 Room A/C: $35 Low E Windows/Doors: $2.00/sq ft

382

Bottom line: comments on incremental costs in the Massachusetts multi-family passive solar housing program  

SciTech Connect (OSTI)

As part of its ongoing Passive Solar Multifamily Housing Program, the Office of Energy Resources performs detailed in-house estimates of incremental passive solar and conservation costs. These estimates are part of an iterative design reviewing process and are used to minimize costs while assuring good system performance. The Office of Energy Resources will finance approved energy conservation and passive solar features in over 20 elderly housing projects presently in various stages of design and construction. Experience gained refining cost-effective designs of these projects is discussed. The discussion includes: isolating and analyzing incremental costs, accruing credits for downsized heating systems, and accounting for soft variables such as additional space and architectural amenity. Cost implications of system type, building scale and geometry, and construction details are outlined, and incremental costs for several specific designs are presented in detail. Much of this information should be applicable to design for single-family and commercial buildings, as well as multi-family housing.

Shannon, R.F.

1980-01-01T23:59:59.000Z

383

Price Responsiveness in the AEO2003 NEMS Residential and Commercial Buildings Sector Models  

Reports and Publications (EIA)

This paper describes the demand responses to changes in energy prices in the Annual Energy Outlook 2003 versions of the Residential and Commercial Demand Modules of the National Energy Modeling System (NEMS). It updates a similar paper completed for the Annual Energy Outlook 1999 version of the NEMS.

2003-01-01T23:59:59.000Z

384

Buildings Energy Data Book: 1.2 Residential Sector Energy Consumption  

Buildings Energy Data Book [EERE]

Residential Sector Energy Consumption March 2012 1.2.9 Implicit Price Deflators (2005 1.00) Year Year Year 1980 0.48 1990 0.72 2000 0.89 1981 0.52 1991 0.75 2001 0.91 1982 0.55...

385

Florida Power and Light - Residential Energy Efficiency Program |  

Broader source: Energy.gov (indexed) [DOE]

Florida Power and Light - Residential Energy Efficiency Program Florida Power and Light - Residential Energy Efficiency Program Florida Power and Light - Residential Energy Efficiency Program < Back Eligibility Installer/Contractor Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Commercial Heating & Cooling Cooling Sealing Your Home Ventilation Heat Pumps Insulation Design & Remodeling Program Info State Florida Program Type Utility Rebate Program Rebate Amount Residential Home Energy Survey: Free A/C and Heat Pump: $140 - $1930, depending on system size and efficiency rating Reflective Roof (Metal or Tile): $325 Duct Test: Discounted Single Family Duct System Repair: up to $154 Multi-family and Manufactured Home Duct System Repair: $60/account Ceiling and Roof Insulation: varies based upon existing insulation levels

386

City of Madison - Green Madison Residential Revolving Loan Program |  

Broader source: Energy.gov (indexed) [DOE]

City of Madison - Green Madison Residential Revolving Loan Program City of Madison - Green Madison Residential Revolving Loan Program City of Madison - Green Madison Residential Revolving Loan Program < Back Eligibility Multi-Family Residential Residential Savings Category Other Solar Buying & Making Electricity Maximum Rebate $15,000 Program Info Start Date 2011 State Wisconsin Program Type Local Loan Program Rebate Amount $1,000-$15,000 Provider City of Madison Green Madison is a revolving loan program for residential energy efficiency improvements. Loans are available for owner-occupied single family residences or owner-occupied multi-family residences of up to three units. Property must be located within the City of Madison. To sign up for the program, interested residents should use the sign up form on the program

387

Passive solar multi-family housing: design, development, finance and market strategies  

SciTech Connect (OSTI)

A basis is provided for problem definition of energy and multi-family housing. A comprehensive look at the costs of energy is taken, not just in the cost per Btu, but also in terms of the marginal or replacement cost of energy, the social and environmental costs of consuming imported energy, and at the projected future costs and availability of non-renewable energy supplies. Some reasons are identified why a developer should consider an energy efficient passive solar project, and the roles that each project team should play to achieve the successful project are described. The concepts necessary to understand the physics and design of passive solar systems are introduced. The unique characteristics of multiple housing are covered and basic ideas for the application of solar concepts are provided. Site selection and planning, design considerations for planning the building, design considerations for individual unit designs, and ways to integrate energy efficient and passive solar components in townhouses and apartments are covered. Techniques are covered for energy conscious and solar design and construction, with emphasis on supplying the tools for making decisions at the appropriate times in the design process. Also covered are: the profit motive to develop housing; state and federal programs, present or planned, the encourage passive solar and energy efficient construction; Solar and Conservation Banks; state and federal tax credits; and financial analysis and marketing strategies. The Massachusetts Passive Multi-Family Program is described. Twelve examples of passive solar multifamily projects from around the country are also described. (LEW)

Not Available

1981-01-01T23:59:59.000Z

388

Battery Power for Your Residential Solar Electric System: Better Buildings Series Solar Electric Fact Sheet  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ELECTRIC ELECTRIC Battery Power for Your Residential Solar Electric System A Winning Combination-Design, Efficiency, and Solar Technology A battery bank stores electricity produced by a solar electric system. If your house is not connected to the utility grid, or if you antici- pate long power outages from the grid, you will need a battery bank. This fact sheet pro- vides an overview of battery basics, including information to help you select and maintain your battery bank. Types of Batteries There are many types of batteries avail- able, and each type is designed for specific applications. Lead-acid batteries have been used for residential solar electric systems for many years and are still the best choice for this application because of their low mainte- nance requirements and cost. You may

389

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book [EERE]

2 2 Year Built (1) Prior to 1950 74.5 114.9 46.8 24% 1950 to 1969 66.0 96.6 38.1 23% 1970 to 1979 59.4 83.4 33.5 15% 1980 to 1989 51.9 81.4 32.3 14% 1990 to 1999 48.2 94.4 33.7 16% 2000 to 2005 44.7 94.7 34.3 8% Average 58.7 95.0 40.0 Note(s): Source(s): 1) Energy consumption per square foot was calculated using estimates of average heated floor space per household. According to the 2005 Residential Energy Consumption Survey (RECS), the average heated floor space per household in the U.S. was 1,618 square feet. Average total floor space, which includes garages, attics and unfinished basements, equaled 2,309 square feet. EIA, 2005 Residential Energy Consumption Survey, Oct. 2008. 2005 Residential Delivered Energy Consumption Intensities, by Vintage Per Square Per Household Per Household

390

Buildings Energy Data Book: 8.2 Residential Sector Water Consumption  

Buildings Energy Data Book [EERE]

1 1 Residential Water Use by Source (Million Gallons per Day) Year 1980 3,400 1985 3,320 1990 3,390 1995 3,390 2000 (3) (3) 3,590 2005 3,830 Note(s): Source(s): 29,430 25,600 1) Public supply water use: water withdrawn by public and private water suppliers that furnish water to at least 25 people or have a minimum of 15 connections. 2) Self-supply water use: Water withdrawn from a groundwater or surface-water source by a user rather than being obtained from a public supply. 3) USGS did not provide estimates of residential use from public supplies in 2000. This value was estimated based on the residential portion of public supply in 1995 and applied to the total public supply water use in 2000. U.S. Geological Survey, Estimated Use of Water in the U.S. in 1985, U.S. Geological Survey Circular 1004, 1988; U.S. Geological Survey, Estimated Use of

391

Buildings Energy Data Book  

Buildings Energy Data Book [EERE]

1.1 Buildings Sector Energy Consumption 1.1 Buildings Sector Energy Consumption 1.2 Building Sector Expenditures 1.3 Value of Construction and Research 1.4 Environmental Data 1.5 Generic Fuel Quad and Comparison 1.6 Embodied Energy of Building Assemblies 2The Residential Sector 3Commercial Sector 4Federal Sector 5Envelope and Equipment 6Energy Supply 7Laws, Energy Codes, and Standards 8Water 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy Transportation Energy Power Technologies Hydrogen Download the Entire Book Skip down to the tables Chapter 1 provides an overview of energy use in the U.S. buildings sector, which includes single- and multi-family residences and commercial buildings. Commercial buildings include offices, stores, restaurants, warehouses, other buildings used for commercial purposes, and government buildings. Section 1.1 presents data on primary energy consumption, as well as energy consumption by end use. Section 1.2 focuses on energy and fuel expenditures in U.S. buildings. Section 1.3 provides estimates of construction spending, R&D, and construction industry employment. Section 1.4 covers emissions from energy use in buildings, construction waste, and other environmental impacts. Section 1.5 discusses key measures used throughout the Data Book, such as a quad, primary versus delivered energy, and carbon emissions. Section 1.6 provides estimates of embodied energy for various commercial building assemblies. The main points from this chapter are summarized below:

392

IMPACT OF REDUCED INFILTRATION AND VENTILATION ON INDOOR AIR QUALITY IN RESIDENTIAL BUILDINGS  

E-Print Network [OSTI]

Critical Analysis of Nitrogen Dioxide Air Quality Standards.contaminants-. ;--- ---- nitrogen dioxide from gas stoves,buildings: nitrogen dioxide (N02), formaldehyde (HCHO), and

Hollowell, Craig D.

2011-01-01T23:59:59.000Z

393

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings  

E-Print Network [OSTI]

wind turbines, and micro- hydro, PV dominates building-sitedgrid-integrated), 3% micro-hydro, and 2% micro-wind. Grid-

Garbesi, Karina

2012-01-01T23:59:59.000Z

394

Vermont Gas- Residential Energy Efficiency Loan and Rebate Program  

Broader source: Energy.gov [DOE]

Vermont Gas customers whose homes have used at least 0.5 Ccf per square foot of natural gas over the past year are eligible for this program, as are multi-family buildings. Typical measures include...

395

Ames Electric Department - Residential Energy Efficiency Rebate Programs |  

Broader source: Energy.gov (indexed) [DOE]

Ames Electric Department - Residential Energy Efficiency Rebate Ames Electric Department - Residential Energy Efficiency Rebate Programs Ames Electric Department - Residential Energy Efficiency Rebate Programs < Back Eligibility Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Appliances & Electronics Home Weatherization Construction Commercial Weatherization Design & Remodeling Heat Pumps Commercial Lighting Lighting Maximum Rebate Appliances: 50% of the equipment cost Programmable Thermostats: 3 per household Room AC: 2 per household Program Info State Iowa Program Type Utility Rebate Program Rebate Amount Energy Star New Home: $500 Energy Audit: FREE Lighting: $2 - $16 per fixture Lighting Sensors: $10 per unit Refrigerators: $25 - $100 Freezers: $50 Dishwashers: $50

396

Salem Electric - Residential, Commercial, and Industrial Efficiency Rebate  

Broader source: Energy.gov (indexed) [DOE]

Salem Electric - Residential, Commercial, and Industrial Efficiency Salem Electric - Residential, Commercial, and Industrial Efficiency Rebate Program Salem Electric - Residential, Commercial, and Industrial Efficiency Rebate Program < Back Eligibility Commercial Fed. Government Industrial Local Government Multi-Family Residential Nonprofit Residential State Government Savings Category Home Weatherization Commercial Weatherization Appliances & Electronics Sealing Your Home Ventilation Manufacturing Heating & Cooling Commercial Heating & Cooling Heat Pumps Commercial Lighting Lighting Water Heating Windows, Doors, & Skylights Maximum Rebate ENERGY Star Light Fixtures: Not to exceed 50% of the fixture cost Program Info State Oregon Program Type Utility Rebate Program Rebate Amount Refrigerators: $60 Freezers: $60 Clothes Washers: $60

397

Alliant Energy Interstate Power and Light (Electric) - Residential Energy  

Broader source: Energy.gov (indexed) [DOE]

Alliant Energy Interstate Power and Light (Electric) - Residential Alliant Energy Interstate Power and Light (Electric) - Residential Energy Efficiency Rebate Program (Iowa) Alliant Energy Interstate Power and Light (Electric) - Residential Energy Efficiency Rebate Program (Iowa) < Back Eligibility Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Cooling Commercial Heating & Cooling Appliances & Electronics Other Heat Pumps Commercial Lighting Lighting Water Heating Windows, Doors, & Skylights Program Info State Iowa Program Type Utility Rebate Program Rebate Amount Central Air Conditioners: $100 - $200 Air Source Heat Pumps: $100 - $400 Geothermal Heat Pumps: $300/ton + $50/EER/ton Fan Motors: $50/unit Programmable Thermostats: $25 Tank Water Heater: $50

398

Alliant Energy Interstate Power and Light (Gas) - Residential Energy  

Broader source: Energy.gov (indexed) [DOE]

Alliant Energy Interstate Power and Light (Gas) - Residential Alliant Energy Interstate Power and Light (Gas) - Residential Energy Efficiency Program Alliant Energy Interstate Power and Light (Gas) - Residential Energy Efficiency Program < Back Eligibility Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Sealing Your Home Cooling Design & Remodeling Windows, Doors, & Skylights Heat Pumps Appliances & Electronics Water Heating Maximum Rebate Caulking/Weather Stripping: $200 Ceiling/Foundation/Wall Insulation: $750 Program Info State Iowa Program Type Utility Rebate Program Rebate Amount Boilers: $150 - $400 Furnaces: $250 - $400 Efficient Fan Motor: $50 Programmable Thermostats: $25 Furnace or Boiler Clean and Tune: $30

399

City Utilities of Springfield - Residential Energy Efficiency Rebate  

Broader source: Energy.gov (indexed) [DOE]

City Utilities of Springfield - Residential Energy Efficiency City Utilities of Springfield - Residential Energy Efficiency Rebate Program City Utilities of Springfield - Residential Energy Efficiency Rebate Program < Back Eligibility Construction Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Commercial Heating & Cooling Cooling Construction Design & Remodeling Heating Heat Pumps Appliances & Electronics Maximum Rebate Varies by equipment and type of residence Program Info State Missouri Program Type Utility Rebate Program Rebate Amount Home Performance with Energy Star: $250 - $800 Energy Star Home Rating: 50% of certification cost, up to $400 Programmable Thermostat: $15 Insulation Upgrade: 20% of cost up $300 Natural Gas Furnace: $400 Natural Gas Furnace Tune-Up: $30

400

Ameren Missouri (Gas) - Residential Energy Efficiency Rebate Programs |  

Broader source: Energy.gov (indexed) [DOE]

Ameren Missouri (Gas) - Residential Energy Efficiency Rebate Ameren Missouri (Gas) - Residential Energy Efficiency Rebate Programs Ameren Missouri (Gas) - Residential Energy Efficiency Rebate Programs < Back Eligibility Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Construction Design & Remodeling Appliances & Electronics Maximum Rebate Ceiling Insulation: $200 Program Info Start Date 1/1/2013 Expiration Date 12/31/2013 State Missouri Program Type Utility Rebate Program Rebate Amount Furnace: $200 (Owner Occupied); $300 (Landlord) Boiler: $100 - $150 (Owner Occupied); $150 - $300 (Landlord) Programmable Thermostat: $25 or 50% of cost Ceiling Insulation: $0.008 x sq ft Comprehensive Audit Measures: Varies widely

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Peoples Gas - Residential Rebate Program (Illinois) | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Peoples Gas - Residential Rebate Program (Illinois) Peoples Gas - Residential Rebate Program (Illinois) Peoples Gas - Residential Rebate Program (Illinois) < Back Eligibility Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Cooling Appliances & Electronics Water Heating Maximum Rebate 100% of project cost Program Info Expiration Date 05/31/2013 State Illinois Program Type Utility Rebate Program Rebate Amount Furnace: $300 -$500 Boiler: varies, depending on size and efficiency Boiler Controls: $100/unit Complete HVAC System Replacement: $650 - $1,000 Water Heater (Tankless): $450 Water Heater (Indirect): $275 Water Heater (Storage Tank): $100 Attic Insulation: $0.10/sq ft Programmable Thermostat: $50

402

Gulf Power - Residential Energy Efficiency EarthCents Program | Department  

Broader source: Energy.gov (indexed) [DOE]

Gulf Power - Residential Energy Efficiency EarthCents Program Gulf Power - Residential Energy Efficiency EarthCents Program Gulf Power - Residential Energy Efficiency EarthCents Program < Back Eligibility Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Commercial Heating & Cooling Cooling Appliances & Electronics Construction Design & Remodeling Sealing Your Home Ventilation Heat Pumps Manufacturing Insulation Water Heating Windows, Doors, & Skylights Program Info State Florida Program Type Utility Rebate Program Rebate Amount Energy Audit: Free Energy Select Programmable Thermostat and Time of Use Control: Free HVAC Maintenance: $215 Duct Repair and Air Sealing: $150 - $300 Fan Motor Retrofit: $150 Heat Pump: $100 - $1000; varies by size and efficiency

403

Eau Claire Energy Cooperative - Residential Energy Efficiency Rebate  

Broader source: Energy.gov (indexed) [DOE]

Eau Claire Energy Cooperative - Residential Energy Efficiency Eau Claire Energy Cooperative - Residential Energy Efficiency Rebate Program Eau Claire Energy Cooperative - Residential Energy Efficiency Rebate Program < Back Eligibility Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Appliances & Electronics Manufacturing Heat Pumps Commercial Lighting Lighting Water Heating Program Info State Wisconsin Program Type Utility Rebate Program Rebate Amount Clothes washer: $25 Dishwashers: $25 Refrigerators: $25 Room Air Conditioner: $25 Dehumidifier: $25 Refrigerator/Freezer/Room AC Recycling: $25 Central Air Conditioner/Mini Split: $40 - $80/Ton Air Source Heat Pump/Mini-Split Heat Pumps: $150/Ton Package Terminal Heat Pump: $150/Ton Geothermal Heat Pump: $300/Ton

404

Property Tax Abatement for Green Buildings | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Property Tax Abatement for Green Buildings Property Tax Abatement for Green Buildings Property Tax Abatement for Green Buildings < Back Eligibility Commercial Industrial Multi-Family Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Bioenergy Solar Lighting Windows, Doors, & Skylights Buying & Making Electricity Heating Water Water Heating Wind Program Info Start Date 12/4/2007 State Nevada Program Type Property Tax Incentive Rebate Amount New Buildings LEED Silver: 25% reduction of the property tax payable each year for 5 - 10 years LEED Gold: 25% - 30% reduction of the property tax payable each year for 5 - 10 years LEED Platinum: 25% - 35% reduction of the property tax payable each year

405

Analysis of improved fenestration for code-compliant residential buildings in hot and humid climates  

E-Print Network [OSTI]

glazing technologies were developed, tested and subsequently adopted by the building industry. The underlying goal that has been carried through to present day research has been to develop the potential of windows as net energy suppliers (Arasteh 1994...

Mukhopadhyay, Jaya

2006-10-30T23:59:59.000Z

406

Window-Related Energy Consumption in the US Residential and Commercial Building Stock  

E-Print Network [OSTI]

window related primary energy consumption of the US building= 1.056 EJ. “Primary” energy consumption includes a site-to-the amount of primary energy consumption required by space

Apte, Joshua; Arasteh, Dariush

2008-01-01T23:59:59.000Z

407

Window-Related Energy Consumption in the US Residential and Commercial Building Stock  

E-Print Network [OSTI]

roughly 2.7% of total US energy consumption. The final tworoughly 1.5% of total US energy consumption. The final twoSpace Conditioning Energy Consumption in US Buildings Annual

Apte, Joshua; Arasteh, Dariush

2008-01-01T23:59:59.000Z

408

EnergyGauge USA: A Residential Building Energy Simulation Design Tool  

E-Print Network [OSTI]

simulation in less than 20 seconds. A simplified user interface allows buildings to be quickly defined while bringing the computing power and accuracy of an hourly computer simulation to builders, designers and raters....

Fairey, P.; Vieira, R. K.; Parker, D. S.; Hanson, B.; Broman, P. A.; Grant, J. B.; Fuehrlein, B.; Gu, L.

2002-01-01T23:59:59.000Z

409

Cost-effective retrofitting of Swedish residential buildings: effects of energy price developments and discount rates  

Science Journals Connector (OSTI)

This paper investigates how the cost-effectiveness of different energy-saving measures (ESMs) in buildings is dependent upon energy prices and discount rates. A bottom-up ... different ESMs for Swedish residentia...

Érika Mata; Angela Sasic Kalagasidis; Filip Johnsson

2014-08-01T23:59:59.000Z

410

Residential Enhanced Rewards Program | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Residential Enhanced Rewards Program Residential Enhanced Rewards Program Residential Enhanced Rewards Program < Back Eligibility Low-Income Residential Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Cooling Program Info Funding Source Focus on Energy Expiration Date 05/31/2013 State Wisconsin Program Type State Rebate Program Rebate Amount Natural Gas Furnace: $475 Furnace with ECM (natural gas, propane, or oil-fired): $850 Hot-Water Boiler ( Natural Gas Furnace with AC: $1,500 Provider Focus on Energy Focus on Energy offers incentives for income-qualifying customers for the purchase of high efficiency heating equipment. Owner-occupied single-family and multifamily residences of 3 units or less are eligible for the incentives. Applicants must be able to document a gross household income of

411

Alameda Municipal Power - Residential Energy Efficiency Program |  

Broader source: Energy.gov (indexed) [DOE]

Alameda Municipal Power - Residential Energy Efficiency Program Alameda Municipal Power - Residential Energy Efficiency Program Alameda Municipal Power - Residential Energy Efficiency Program < Back Eligibility Low-Income Residential Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Sealing Your Home Heating & Cooling Construction Commercial Heating & Cooling Design & Remodeling Program Info State California Program Type Utility Grant Program Rebate Amount Refrigerator Replacement: Up to $100 Second Refrigerator Pickup: $35 CFLs: 3 free replacement bulbs Motors: $0.18/per kWh saved Lighting: $0.20/per kWh saved HVAC: $0.22/per kWh saved Refrigeration: $0.22/per kWh saved Provider Alameda Municipal Power Alameda Municipal Power (AMP) has multiple program in place to help

412

Buildings Energy Data Book: 8.2 Residential Sector Water Consumption  

Buildings Energy Data Book [EERE]

6 6 Residential Water Billing Rate Structures for Community Water Systems Rate Structure Uniform Rates Declining Block Rate Increasing Block Rate Peak Period or Seasonal Rate Separate Flat Fee Annual Connection Fee Combined Flat Fee Other Rate Structures Note(s): Source(s): 3.0% 9.0% 1) Systems serving more than 10,000 users provide service to 82% of the population served by community water systems. Columns do not sum to 100% because some systems use more than one rate structure. 2) Uniform rates charge a set price for each unit of water. Block rates charge a different price for each additional increment of usage. The prices for each increment is higher for increasing block rates and lower for decreasing block rates. Peak rates and seasonal rates charge higher prices when demand is highest. Flat fees charge a set price for

413

Buildings Energy Data Book: 7.3 Efficiency Standards for Residential HVAC  

Buildings Energy Data Book [EERE]

3 3 Efficiency Standards for Residential Boilers Effective for products manufactured before September 1, 2012 AFUE(%) (1) Boilers (excluding gas steam) Gas Steam Boilers Effective for products manufactured on or after September 1, 2012 (2) AFUE (%) (1) No Constant Burning Pilot Automatic Means for Adjusting Water Temperature Gas Steam No Constant Burning Pilot Oil Hot Water Automatic Means for Adjusting Water Temperature Oil Steam None Electric Hot water Automatic Means for Adjusting Water Temperature Electric Steam None Note(s): Source(s): 84 82 None None 1) Annual Fuel Utilization Efficiency. 2) Boilers manufactured to operate without any need for electricity, an electric connection, electric gauges, electric pumps, electric wires, or electric devices are not required to comply with the revised standards that take effect September 1,

414

Buildings Energy Data Book: 7.5 Efficiency Standards for Residential Appliances  

Buildings Energy Data Book [EERE]

2 2 Efficiency Standards for Residential Refrigerators and Freezers (1) 1) 2) 3) 4) 5) 6) Note(s): Source(s): Refrigerator-freezers, automatic defrost with side-mounted freezer with through-the-door ice service 10.10AV + 406.0 1) Effective for products manufactured on or after July 1, 2001. Standards do not apply to refrigerators and refrigerator-freezers with total refrigerated volume exceeding 39 cubic feet or freezers with total refrigerated volume exceeding 30 cubic feet. AV = total adjusted volume (ft^3). Title 10, Code of Federal Regulations, Part 430 - Energy Conservation Program for Consumer Products, Subpart C - Energy and Water Conservation Standards and Their Effective Dates. January 1, 2010. Refrigerator-freezers, automatic defrost with side-mounted freezer without through-the-

415

Buildings Energy Data Book: 7.5 Efficiency Standards for Residential Appliances  

Buildings Energy Data Book [EERE]

3 3 Efficiency Standards for Residential Water Heaters (1) Effective for products manufactured from January 20, 2004 through April 15, 2015 Gas-Fired Storage Water Heaters Oil-Fired Water Heaters EF = 0.67 - (0.0019 x Rated Storage Volume in gallons) EF = 0.59 - (0.0019 x Rated Storage Volume in gallons) Instantaneous Gas-Fired Water Heaters Instantaneous Electric and Table Top Water Heaters EF = 0.62 - (0.0019 x Rated Storage Volume in gallons) EF = 0.93 - (0.00132 x Rated Storage Volume in gallons) Electric Storage Water Heaters EF = 0.97 - (0.00132 x Rated Storage Volume in gallons) Effective for products manufactured on or after April 16, 2015 Gas-Fired Storage Water Heaters Rated Storage Volume ≤ 55 gallons EF = 0.675 - (0.0015 x Rated Storage Volume in gallons)

416

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book [EERE]

20 20 Site Consumption Primary Consumption Total Residential Industry Electric Gen. Transportation Residential Industry Transportation (quads) 1980 5% 28% 8% 56% | 8% 31% 56% 34.2 1981 5% 26% 7% 59% | 7% 29% 59% 31.9 1982 5% 26% 5% 61% | 6% 28% 61% 30.2 1983 4% 25% 5% 62% | 6% 27% 62% 30.1 1984 5% 26% 4% 61% | 6% 27% 61% 31.1 1985 5% 25% 4% 63% | 6% 26% 63% 30.9 1986 5% 24% 5% 63% | 6% 26% 63% 32.2 1987 5% 25% 4% 63% | 6% 26% 63% 32.9 1988 5% 24% 5% 63% | 6% 26% 63% 34.2 1989 5% 24% 5% 63% | 7% 25% 63% 34.2 1990 4% 25% 4% 64% | 5% 26% 64% 33.6 1991 4% 24% 4% 65% | 5% 26% 65% 32.8 1992 4% 26% 3% 65% | 5% 27% 65% 33.5 1993 4% 25% 3% 65% | 5% 26% 65% 33.8 1994 4% 25% 3% 65% | 5% 26% 65% 34.7 1995 4% 25% 2% 67% | 5% 26% 67% 34.6 1996 4% 25% 2% 66% | 5% 26% 66% 35.8 1997 4% 26% 3% 66% | 5% 26% 66% 36.3 1998 3% 25% 4% 66% | 5% 26% 66% 36.9 1999 4% 25% 3% 66% | 5% 26% 66% 38.0 2000 4% 24% 3% 67% | 5% 25% 67% 38.4 2001 4% 24% 3% 67% | 5% 25% 67% 38.3 2002 4% 24% 3% 68% | 5% 25% 68% 38.4 2003

417

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book [EERE]

9 9 Total Residential Industry Electric Gen. Transportation Residential Industry Transportation (quads) 1980 24% 41% 19% 3% | 30% 49% 3% 20.22 1981 23% 42% 19% 3% | 30% 49% 3% 19.74 1982 26% 39% 18% 3% | 32% 45% 3% 18.36 1983 26% 39% 17% 3% | 32% 46% 3% 17.20 1984 25% 40% 17% 3% | 31% 47% 3% 18.38 1985 25% 40% 18% 3% | 32% 46% 3% 17.70 1986 26% 40% 16% 3% | 32% 46% 3% 16.59 1987 25% 41% 17% 3% | 31% 47% 3% 17.63 1988 26% 42% 15% 3% | 31% 47% 3% 18.44 1989 25% 41% 16% 3% | 30% 47% 3% 19.56 1990 23% 43% 17% 3% | 29% 49% 4% 19.57 1991 23% 43% 17% 3% | 29% 49% 3% 20.03 1992 23% 43% 17% 3% | 29% 49% 3% 20.71 1993 24% 43% 17% 3% | 30% 48% 3% 21.24 1994 23% 42% 18% 3% | 29% 48% 3% 21.75 1995 22% 42% 19% 3% | 28% 49% 3% 22.71 1996 23% 43% 17% 3% | 29% 49% 3% 23.14 1997 22% 43% 18% 3% | 28% 49% 3% 23.34 1998 20% 43% 20% 3% | 27% 50% 3% 22.86 1999 21% 41% 21% 3% | 28% 48% 3% 22.88 2000 21% 40% 22% 3% | 29% 47% 3% 23.66 2001 21% 38% 24% 3% | 30% 45% 3% 22.69 2002 21% 38% 24% 3% | 30% 45%

418

Steam System Balancing and Tuning for Multifamily Residential Buildings in Chicagoland - Second Year of Data Collection  

SciTech Connect (OSTI)

Steam heated buildings often suffer from uneven heating as a result of poor control of the amount of steam entering each radiator. In order to satisfy the heating load to the coldest units, other units are overheated. As a result, some tenants complain of being too hot and open their windows in the middle of winter, while others complain of being too cold and are compelled to use supplemental heat sources. Building on previous research, CNT Energy identified 10 test buildings in Chicago and conducted a study to identify best practices for the methodology, typical costs, and energy savings associated with steam system balancing. A package of common steam balancing measures was assembled and data were collected on the buildings before and after these retrofits were installed to investigate the process, challenges, and the cost effectiveness of improving steam systems through improved venting and control systems. The test buildings that received venting upgrades and new control systems showed 10.2% savings on their natural gas heating load, with a simple payback of 5.1 years. The methodologies for and findings from this study are presented in detail in this report. This report has been updated from a version published in August 2012 to include natural gas usage information from the 2012 heating season and updated natural gas savings calculations.

Choi, J.; Ludwig, P.; Brand, L.

2013-08-01T23:59:59.000Z

419

Michigan State, Summary of Reported Data From July 1, 2010 -...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Savings Residential Single---Family Residential Multi---Family Units Commercial Buildings Industrial Buildings Agricultural Buildings Assessments 0 0 12 0 0 Upgrades 0 0 47 0 0...

420

An Analysis of Building Envelope Upgrades for Residential Energy Efficiency in Hot and Humid Climates  

E-Print Network [OSTI]

and exterior walls, and windows. A DOE-2 simulation model of a 2000/2001 IECC code-compliant house in Houston, Texas, was used for the analysis. The results demonstrated the effect of incremental changes in these properties on the building's energy use...

Malhotra, M.; Haberl, J.

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Experimental Investigation of Direct Expansion Dynamic Ice-on-coil Storage System Used in Residential Buildings  

E-Print Network [OSTI]

The reduction in electricity consumption of an ice-storage system in the daytime leads to financial savings for building owners and extension savings for a power plant and national economy. Great advancements have been made in domestic ice-storage...

Zheng, M.; Kong, F.; Han, Z.; Liu, W.

2006-01-01T23:59:59.000Z

422

Energy retrofit of residential building envelopes in Israel: A cost-benefit analysis  

Science Journals Connector (OSTI)

Abstract It is often taken for granted that thermal renovation of building envelopes not only conserves operational energy and reduces the environmental impact of generating electricity, but is also economically beneficial to the individual homeowner. While this may be true in cold climates, it may not necessarily be true in the case of Israel, most of which has a relatively mild Mediterranean climate but parts of which are hot and arid. This study, which sought to address this question, comprised two stages: a) Analysis of the direct economic benefits to the individual homeowner of different strategies for refurbishing the envelope of an existing building; and b) Examination of other (external) benefits to society arising from electricity conservation resulting from such retrofit. The analysis demonstrates that in Israel, given current electricity prices and building construction costs, insulating the roof is a cost-effective strategy – but the payback period is 15–30 years, making it unattractive to most homeowners. Insulating the external walls of a typical apartment results in electricity savings comparable to only one third of the retrofit cost, and is thus not economically viable. Accounting for the external benefits to society does make some marginal retrofits more attractive, but not sufficiently to justify most envelope retrofit options. This highlights the importance of adopting stringent standards for new construction, since the marginal cost of additional thermal insulation in new buildings is far lower than the cost of renovating them.

Chanoch Friedman; Nir Becker; Evyatar Erell

2014-01-01T23:59:59.000Z

423

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book [EERE]

Buildings, by Fuel and Region (Thousand BtuSF) Region Electricity Natural Gas Fuel Oil Total Northeast 27.7 45.9 39.9 71.5 Midwest 22.5 49.9 N.A. 70.3 South 53.5 27.9 N.A....

424

Buildings Energy Data Book: 2.5 Residential Construction and Housing Market  

Buildings Energy Data Book [EERE]

2 2 2010 Five Largest Residential Homebuilders Homebuilder PulteGroup 5.3% D.R. Horton 5.9% NVR 3.1% Lennar Corporation 3.4% KB Home 2.3% Top Five Total 19.9% Habitat for Humanity (3) 0.1% Note(s): Source(s): 6,032 402 1) 2010 total U.S. new home closings were 323,000 (only single-family). 2) Total share of closings of top 20 builders was 35%. Total share of the top 100 builders was 54%. 3) Habitat for Humanity built more than 400 homes during the week of May 31, 2007; Habitat for Humanity has built over 1,000 homes in the New Orleans area since Hurricane Katrina. Habitat for Humanity's 2,100 worldwide affiliates have completed more than 200,000 homes since 1976, providing more than 1,000,000 with housing. Housing Giants Magazine, May 2011, Professional Builder's 2011 Housing Giants Rankings.

425

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book [EERE]

0 0 Region (1) Northeast 73.5 122.2 47.7 24% New England 77.0 129.4 55.3 7% Middle Atlantic 72.2 119.7 45.3 17% Midwest 58.9 113.5 46.0 28% East North Central 61.1 117.7 47.3 20% West North Central 54.0 104.1 42.9 8% South 51.5 79.8 31.6 31% South Atlantic 47.4 76.1 30.4 16% East South Central 56.6 87.3 36.1 6% West South Central 56.6 82.4 31.4 9% West 56.6 77.4 28.1 18% Mountain 54.4 89.8 33.7 6% Pacific 58.0 71.8 25.7 11% U.S. Average 58.7 94.9 37.0 100% Note(s): Source(s): 1) Energy consumption per square foot was calculated using estimates of average heated floor space per household. According to the 2005 Residential Energy Consumption Survey (RECS), the average heated floor space per household in the U.S. was 1,618 square feet. Average total floor space, which includes garages, attics and unfinished basements, equaled 2,309 square feet.

426

Buildings Energy Data Book: 8.2 Residential Sector Water Consumption  

Buildings Energy Data Book [EERE]

2 2 1999 Single-Family Home Daily Water Consumption by End Use (Gallons per Capita) (1) Fixture/End Use Toilet 18.5 18.3% Clothes Washer 15 14.9% Shower 11.6 11.5% Faucet 10.9 10.8% Other Domestic 1.6 1.6% Bath 1.2 1.2% Dishwasher 1 1.0% Leaks 9.5 9.4% Outdoor Use (2) 31.7 31.4% Total (2) 101 100% Note(s): Source(s): Average gallons Total Use per capita per day Percent 1) Based analysis of 1,188 single-family homes at 12 study locations. 2) Total Water use derived from USGS. Outdoor use is the difference between total and indoor uses. American Water Works Association Research Foundation, Residential End Uses of Water, 1999; U.S. Geological Survey, Estimated Use of Water in the U.S. in 2000, U.S. Geological Survey Circular 1268, 2004, Table 6, p. 17; and Vickers, Amy, Handbook of Water Use and Conservation, June 2002, p. 15.

427

Buildings Energy Data Book: 2.5 Residential Construction and Housing Market  

Buildings Energy Data Book [EERE]

Construction Statistics of New Homes Completed/Placed Year Thousand Units Average SF Thousand Units Average SF 1980 234 1981 229 1982 234 1983 278 1984 288 1985 283 1986 256 1987 239 1988 224 1989 203 1990 195 1991 174 1992 212 1993 243 1994 291 1995 319 1996 338 1997 336 1998 374 1999 338 2000 281 2001 196 2002 174 2003 140 2004 124 2005 123 2006 112 2007 95 2008 81 2009 55 2010 50 Source(s): 496 2,392 155 1,172 701 DOC, 2010 Characteristics of New Housing, 2010, "Median and Average Square Feet of Floor Area in New Single-Family Houses Completed by Location", "Presence of Air-Conditioning in New Single Family Houses", "Number of Multifamily Units Completed by Number of Units Per Building", "Median and Average Square Feet of Floor Area in Units in New Multifamily Buildings Completed", "Placements of New Manufactured Homes by Region and Size of Home, 1980-

428

Building Code Compliance and Enforcement: The Experience of SanFrancisco's Residential Energy Conservation Ordinanace and California'sBuildign Standards for New Construction  

SciTech Connect (OSTI)

As part of Lawrence Berkeley Laboratory's (LBL) technical assistance to the Sustainable City Project, compliance and enforcement activities related to local and state building codes for existing and new construction were evaluated in two case studies. The analysis of the City of San Francisco's Residential Energy Conservation Ordinance (RECO) showed that a limited, prescriptive energy conservation ordinance for existing residential construction can be enforced relatively easily with little administrative costs, and that compliance with such ordinances can be quite high. Compliance with the code was facilitated by extensive publicity, an informed public concerned with the cost of energy and knowledgeable about energy efficiency, the threat of punishment (Order of Abatement), the use of private inspectors, and training workshops for City and private inspectors. The analysis of California's Title 24 Standards for new residential and commercial construction showed that enforcement of this type of code for many climate zones is more complex and requires extensive administrative support for education and training of inspectors, architects, engineers, and builders. Under this code, prescriptive and performance approaches for compliance are permitted, resulting in the demand for alternative methods of enforcement: technical assistance, plan review, field inspection, and computer analysis. In contrast to existing construction, building design and new materials and construction practices are of critical importance in new construction, creating a need for extensive technical assistance and extensive interaction between enforcement personnel and the building community. Compliance problems associated with building design and installation did occur in both residential and nonresidential buildings. Because statewide codes are enforced by local officials, these problems may increase over time as energy standards change and become more complex and as other standards (eg, health and safety codes) remain a higher priority. The California Energy Commission realizes that code enforcement by itself is insufficient and expects that additional educational and technical assistance efforts (eg, manuals, training programs, and toll-free telephone lines) will ameliorate these problems.

Vine, E.

1990-11-01T23:59:59.000Z

429

Multifamily Energy Savings Program (Existing Buildings and New  

Broader source: Energy.gov (indexed) [DOE]

Multifamily Energy Savings Program (Existing Buildings and New Multifamily Energy Savings Program (Existing Buildings and New Construction) Multifamily Energy Savings Program (Existing Buildings and New Construction) < Back Eligibility Multi-Family Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Cooling Appliances & Electronics Sealing Your Home Ventilation Construction Manufacturing Heat Pumps Commercial Lighting Lighting Water Heating Maximum Rebate Prescriptive: Varies by equipment type, $200,000 per project Custom: Lesser of 50% of cost or $200,000 per project Total: $200,000 per project and $400,000 per customer tax ID per year for all Focus incentives. Program Info Funding Source Focus on Energy Expiration Date 12/31/2013 State Wisconsin

430

Business Energy Efficiency Rebate for Existing Buildings | Department of  

Broader source: Energy.gov (indexed) [DOE]

Business Energy Efficiency Rebate for Existing Buildings Business Energy Efficiency Rebate for Existing Buildings Business Energy Efficiency Rebate for Existing Buildings < Back Eligibility Agricultural Commercial Industrial Institutional Multi-Family Residential State Government Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Cooling Appliances & Electronics Other Manufacturing Heat Pumps Commercial Lighting Lighting Water Heating Maximum Rebate $500,000 per site, per year Program Info Funding Source Public Benefits Fund State Oregon Program Type State Rebate Program Rebate Amount Air Conditioners Units: $180 - $750, varies by size and efficiency Heat Pumps: $100 - $300, varies by type and size HVAC Unit Heater: $1.50/kBtu/hr in Warm-Air Furnace: $3/kBtu/hr in

431

The National Energy Modeling System: An Overview 2000 - Residential Demand  

Gasoline and Diesel Fuel Update (EIA)

residential demand module (RDM) forecasts energy consumption by Census division for seven marketed energy sources plus solar and geothermal energy. RDM is a structural model and its forecasts are built up from projections of the residential housing stock and of the energy-consuming equipment contained therein. The components of RDM and its interactions with the NEMS system are shown in Figure 5. NEMS provides forecasts of residential energy prices, population, and housing starts, which are used by RDM to develop forecasts of energy consumption by fuel and Census division. residential demand module (RDM) forecasts energy consumption by Census division for seven marketed energy sources plus solar and geothermal energy. RDM is a structural model and its forecasts are built up from projections of the residential housing stock and of the energy-consuming equipment contained therein. The components of RDM and its interactions with the NEMS system are shown in Figure 5. NEMS provides forecasts of residential energy prices, population, and housing starts, which are used by RDM to develop forecasts of energy consumption by fuel and Census division. Figure 5. Residential Demand Module Structure RDM incorporates the effects of four broadly-defined determinants of energy consumption: economic and demographic effects, structural effects, technology turnover and advancement effects, and energy market effects. Economic and demographic effects include the number, dwelling type (single-family, multi-family or mobile homes), occupants per household, and location of housing units. Structural effects include increasing average dwelling size and changes in the mix of desired end-use services provided by energy (new end uses and/or increasing penetration of current end uses, such as the increasing popularity of electronic equipment and computers). Technology effects include changes in the stock of installed equipment caused by normal turnover of old, worn out equipment with newer versions which tend to be more energy efficient, the integrated effects of equipment and building shell (insulation level) in new construction, and in the projected availability of even more energy-efficient equipment in the future. Energy market effects include the short-run effects of energy prices on energy demands, the longer-run effects of energy prices on the efficiency of purchased equipment and the efficiency of building shells, and limitations on minimum levels of efficiency imposed by legislated efficiency standards.

432

NIPSCO (Gas and Electric) - Residential Natural Gas Efficiency Rebates |  

Broader source: Energy.gov (indexed) [DOE]

NIPSCO (Gas and Electric) - Residential Natural Gas Efficiency NIPSCO (Gas and Electric) - Residential Natural Gas Efficiency Rebates NIPSCO (Gas and Electric) - Residential Natural Gas Efficiency Rebates < Back Eligibility Construction Low-Income Residential Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Cooling Program Info State Indiana Program Type Utility Rebate Program Rebate Amount Varies Provider Energy Efficiency Programs Group Northern Indiana Public Service Corporation (NIPSCO) offers rebates to residential customers that install energy efficient gas and electric measures in homes through the NIPSCO Energy Efficiency Rebate Program. The program is available to all residential NIPSCO natural gas and electric customers. Flat rebates are offered for natural gas boilers, natural gas

433

Detroit Public Lighting Department - Residential Energy Wise Program |  

Broader source: Energy.gov (indexed) [DOE]

Detroit Public Lighting Department - Residential Energy Wise Detroit Public Lighting Department - Residential Energy Wise Program Detroit Public Lighting Department - Residential Energy Wise Program < Back Eligibility Low-Income Residential Multi-Family Residential Residential Savings Category Heating & Cooling Cooling Appliances & Electronics Commercial Lighting Lighting Program Info State Michigan Program Type Utility Rebate Program Rebate Amount CFLs: $2-$10 LED Task Light: $10.00 LED Night light: $1.25 Energy Star Ceiling Fan: $10 Provider Detroit Public Lighting Department The Detroit Public Lighting Department (PLD) offers residential customers rebates for energy efficient lights. In addition, low-income residential customers may qualify for free compact fluorescent lights (CFLs). Specific rebate amounts, equipment requirements, and applications are available on

434

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book [EERE]

5 5 Natural Fuel Other Renw. Site Site Primary Gas Oil LPG Fuel(1) En.(2) Electric Total Percent Electric (3) Total Percent Space Heating (4) 3.50 0.53 0.30 0.04 0.43 0.44 5.23 44.7% | 1.35 6.15 27.8% Water Heating 1.29 0.10 0.07 0.01 0.45 1.92 16.4% | 1.38 2.86 12.9% Space Cooling 0.00 1.08 1.08 9.2% | 3.34 3.34 15.1% Lighting 0.69 0.69 5.9% | 2.13 2.13 9.7% Refrigeration (6) 0.45 0.45 3.9% | 1.41 1.41 6.4% Electronics (5) 0.54 0.54 4.7% | 1.68 1.68 7.6% Wet Cleaning (7) 0.06 0.33 0.38 3.3% | 1.01 1.06 4.8% Cooking 0.22 0.03 0.18 0.43 3.7% | 0.57 0.81 3.7% Computers 0.17 0.17 1.5% | 0.53 0.53 2.4% Other (8) 0.00 0.16 0.01 0.20 0.37 3.2% | 0.63 0.80 3.6% Adjust to SEDS (9) 0.42 0.42 3.6% | 1.29 1.29 5.8% Total 5.06 0.63 0.56 0.04 0.45 4.95 11.69 100% | 15.34 22.07 100% Note(s): Source(s): 2010 Residential Energy End-Use Splits, by Fuel Type (Quadrillion Btu) Primary 1) Kerosene and coal are assumed attributable to space heating. 2) Comprised of wood space heating (0.42 quad), solar water heating (0.01

435

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book [EERE]

8 8 Natural Fuel Other Renw. Site Site Primary Gas Oil LPG Fuel(1) En.(2) Electric Total Percent Electric (3) Total Percent Space Heating (4) 3.20 0.31 0.22 0.03 0.46 0.49 4.72 38.9% | 1.45 5.67 23.9% Water Heating 1.27 0.04 0.03 0.02 0.54 1.90 15.6% | 1.60 2.96 12.5% Space Cooling 0.00 1.25 1.25 10.3% | 3.68 3.68 15.5% Lighting 0.48 0.48 3.9% | 1.41 1.41 5.9% Refrigeration (5) 0.52 0.52 4.3% | 1.54 1.54 6.5% Electronics (6) 0.44 0.44 3.6% | 1.29 1.29 5.4% Wet Cleaning (7) 0.07 0.32 0.39 3.2% | 0.95 1.01 4.3% Cooking 0.23 0.02 0.15 0.40 3.3% | 0.44 0.69 2.9% Computers 0.27 0.27 2.2% | 0.79 0.79 3.3% Other (8) 0.00 0.22 0.07 1.48 1.77 14.6% | 4.35 4.64 19.6% Total 4.76 0.35 0.51 0.03 0.55 5.94 12.14 100% | 17.50 23.69 100% Note(s): Source(s): 2035 Residential Energy End-Use Splits, by Fuel Type (Quadrillion Btu) Primary 1) Kerosene and coal are assumed attributable to space heating. 2) Comprised of wood space heating (0.44 quad), solar water heating (0.02

436

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book [EERE]

7 7 Natural Fuel Other Renw. Site Site Primary Gas Oil LPG Fuel(1) En.(2) Electric Total Percent Electric (3) Total Percent Space Heating (4) 3.28 0.38 0.24 0.03 0.46 0.46 4.85 41.5% | 1.40 5.78 25.8% Water Heating 1.32 0.05 0.04 0.02 0.53 1.96 16.8% | 1.60 3.03 13.5% Space Cooling 0.00 1.12 1.12 9.6% | 3.38 3.38 15.1% Lighting 0.47 0.47 4.0% | 1.42 1.42 6.3% Refrigeration (5) 0.48 0.48 4.1% | 1.45 1.45 6.5% Electronics (6) 0.37 0.37 3.2% | 1.12 1.12 5.0% Wet Cleaning (7) 0.06 0.30 0.37 3.1% | 0.91 0.98 4.4% Cooking 0.22 0.03 0.13 0.38 3.2% | 0.40 0.64 2.9% Computers 0.24 0.24 2.0% | 0.72 0.72 3.2% Other (8) 0.00 0.20 0.07 1.20 1.46 12.5% | 3.61 3.87 17.3% Total 4.88 0.43 0.50 0.03 1.00 5.30 11.69 100% | 16.00 22.39 100% Note(s): Source(s): 2025 Residential Energy End-Use Splits, by Fuel Type (Quadrillion Btu) Primary 1) Kerosene and coal are assumed attributable to space heating. 2) Comprised of wood space heating (0.43 quad), solar water heating (0.02

437

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book [EERE]

6 6 Natural Fuel Other Renw. Site Site Primary Gas Oil LPG Fuel(1) En.(2) Electric Total Percent Electric (3) Total Percent Space Heating (4) 3.40 0.48 0.26 0.03 0.44 0.42 5.03 44.2% | 1.27 5.88 27.9% Water Heating 1.31 0.07 0.05 0.02 0.48 1.92 16.9% | 1.44 2.88 13.7% Space Cooling 0.00 1.02 1.02 8.9% | 3.07 3.07 14.6% Lighting 0.53 0.53 4.6% | 1.60 1.60 7.6% Refrigeration (5) 0.45 0.45 4.0% | 1.37 1.37 6.5% Electronics (6) 0.33 0.33 2.9% | 0.99 0.99 4.7% Wet Cleaning (7) 0.06 0.33 0.39 3.4% | 0.98 1.04 5.0% Cooking 0.22 0.03 0.11 0.36 3.1% | 0.34 0.59 2.8% Computers 0.19 0.19 1.7% | 0.57 0.57 2.7% Other (8) 0.00 0.17 0.05 0.94 1.17 10.2% | 2.85 3.07 14.6% Total 4.99 0.55 0.51 0.03 0.51 4.79 11.38 100% | 14.47 21.06 100% Note(s): Source(s): 2015 Residential Energy End-Use Splits, by Fuel Type (Quadrillion Btu) Primary 1) Kerosene and coal are assumed attributable to space heating. 2) Comprised of wood space heating (0.43 quad), solar water heating (0.02

438

MassSAVE (Electric) - Residential Energy Efficiency Programs | Department  

Broader source: Energy.gov (indexed) [DOE]

Energy Efficiency Programs Energy Efficiency Programs MassSAVE (Electric) - Residential Energy Efficiency Programs < Back Eligibility Low-Income Residential Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Commercial Heating & Cooling Cooling Other Sealing Your Home Ventilation Heat Pumps Appliances & Electronics Commercial Lighting Lighting Water Heating Maximum Rebate Weatherization: $2,000 Program Info Start Date 1/1/2013 Expiration Date 12/31/2013 State Massachusetts Program Type Utility Rebate Program Rebate Amount Weatherization: 75% Heat Pump Water Heater: $750 Income Eligible Customers: free home energy consultation Mulitifamily Incentives: comprehensive energy analysis, lighting upgrades, insulation, air sealing and other energy saving measures.

439

Progress Energy Carolinas - Residential New Construction Rebate Program  

Broader source: Energy.gov (indexed) [DOE]

South Carolina) South Carolina) Progress Energy Carolinas - Residential New Construction Rebate Program (South Carolina) < Back Eligibility Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Home Weatherization Construction Commercial Weatherization Design & Remodeling Heat Pumps Appliances & Electronics Water Heating Program Info State South Carolina Program Type Utility Rebate Program Rebate Amount New homes can qualify for either equipment incentives or whole house incentives, not both Equipment Incentives Heat Pump Water Heaters: $350 High Efficiency HVAC; air-to-air heat pumps: $300 High Efficiency HVAC; central air conditioning: $300 Whole House Incentives $1,000 - $4,000 Provider Progress Energy Progress Energy's residential new construction program provides cash

440

Progress Energy Carolinas - Residential New Construction Rebate Program  

Broader source: Energy.gov (indexed) [DOE]

North Carolina) North Carolina) Progress Energy Carolinas - Residential New Construction Rebate Program (North Carolina) < Back Eligibility Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Home Weatherization Construction Commercial Weatherization Design & Remodeling Heat Pumps Appliances & Electronics Water Heating Program Info State North Carolina Program Type Utility Rebate Program Rebate Amount New homes can qualify for either equipment incentives or whole house incentives, not both Equipment Incentives Heat Pump Water Heaters: $350 High Efficiency HVAC; air-to-air heat pumps: $300 High Efficiency HVAC; central air conditioning: $300 Whole House Incentives $1,000 - $4,000 Provider Progress Energy Progress Energy's residential new construction program provides cash

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

MassSAVE (Electric) - Residential Retrofit Programs | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Retrofit Programs Retrofit Programs MassSAVE (Electric) - Residential Retrofit Programs < Back Eligibility Low-Income Residential Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Commercial Heating & Cooling Cooling Construction Design & Remodeling Other Sealing Your Home Ventilation Heat Pumps Appliances & Electronics Commercial Lighting Lighting Water Heating Maximum Rebate Weatherization: $2000 Program Info Expiration Date 12/31/2012 State Massachusetts Program Type Utility Rebate Program Rebate Amount Weatherization: 75% Heat Pump Water Heater: $1,000 Income Eligible Customers: free home energy consultation Mulitifamily Incentives: comprehensive energy analysis, lighting upgrades, insulation, air sealing and other energy saving measures.

442

Statistical Analysis of Baseline Load Models for Non-Residential Buildings  

SciTech Connect (OSTI)

Policymakers are encouraging the development of standardized and consistent methods to quantify the electric load impacts of demand response programs. For load impacts, an essential part of the analysis is the estimation of the baseline load profile. In this paper, we present a statistical evaluation of the performance of several different models used to calculate baselines for commercial buildings participating in a demand response program in California. In our approach, we use the model to estimate baseline loads for a large set of proxy event days for which the actual load data are also available. Measures of the accuracy and bias of different models, the importance of weather effects, and the effect of applying morning adjustment factors (which use data from the day of the event to adjust the estimated baseline) are presented. Our results suggest that (1) the accuracy of baseline load models can be improved substantially by applying a morning adjustment, (2) the characterization of building loads by variability and weather sensitivity is a useful indicator of which types of baseline models will perform well, and (3) models that incorporate temperature either improve the accuracy of the model fit or do not change it.

Coughlin, Katie; Piette, Mary Ann; Goldman, Charles; Kiliccote, Sila

2008-11-10T23:59:59.000Z

443

Entergy Arkansas - Residential Energy Efficiency Program (Arkansas) |  

Broader source: Energy.gov (indexed) [DOE]

Entergy Arkansas - Residential Energy Efficiency Program (Arkansas) Entergy Arkansas - Residential Energy Efficiency Program (Arkansas) Entergy Arkansas - Residential Energy Efficiency Program (Arkansas) < Back Eligibility Installer/Contractor Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Commercial Heating & Cooling Cooling Construction Design & Remodeling Other Sealing Your Home Ventilation Heat Pumps Appliances & Electronics Commercial Lighting Lighting Program Info State Arkansas Program Type Utility Rebate Program Rebate Amount $175 incentive toward the cost of a high-performance AC tune-up of a system size 5 tons or less $200 incentive toward the cost of a high-performance AC tune-up of a system size over 5 tons Tier 1 Home Energy Survey --- Survey $75 discount

444

Energy Saving Alignment Strategy: Achieving energy efficiency in urban buildings by matching occupant temperature preferences with a building’s indoor thermal environment  

Science Journals Connector (OSTI)

Abstract Existing strategies for residential energy savings through physical renovation or motivating occupant energy conservation behavior can be costly and/or have transitory effects. Focusing on multi-family dwellings, an important subset of the urban residential sector, we propose an Energy Saving Alignment Strategy (ESAS) that has advantageous cost-effectiveness and a long-lasting influence. By aligning the distribution of residents’ thermostat preferences with the indoor temperature, ESAS aims to maximize thermal comfort and, accordingly, energy savings in multi-family buildings where indoor temperatures vary between apartments as a function of apartment orientation and floor level. Using a case study of a 1084-apartment public housing complex in New York, we classify both occupants’ thermostat preferences and apartments’ operative temperatures into five groups, and optimize energy efficiency by assigning each group of occupants to the group of apartments that best aligns with their thermostat preference. We test ESAS in eight cities representing all four U.S. census regions and six climate zones. Simulation results reveal 2.1–42.0% in energy savings compared to random apartment assignments depending on geographic location, with the highest energy reductions occurring in cities with mild climates, where the range of occupant thermostat preferences coincides with the natural indoor temperature range. We conclude by providing suggested guidelines on how ESAS might work in practice, and recommendations for extending ESAS research.

Xiaoqi Xu; Patricia J. Culligan; John E. Taylor

2014-01-01T23:59:59.000Z

445

April 30 Public Meeting: Physical Characterization of Smart and Grid-Connected Commercial and Residential Building End-Use Equipment and Appliances  

Broader source: Energy.gov [DOE]

These documents contain slide decks presented at the Physical Characterization of Smart and Grid-Connected Commercial and Residential Buildings End-Use Equipment and Appliances public meeting held on April 30, 2014. The first document includes the first presentation from the meeting: DOE Vision and Objectives. The second document includes all other presentations from the meeting: Terminology and Definitions; End-User and Grid Services; Physical Characterization Framework; Value, Benefits & Metrics.

446

Comparison of DOE-2.1E with Energyplus and TRNSYS for Ground Coupled Residential Buildings in Hot anf Humid Climates Stage 1  

E-Print Network [OSTI]

ESL-TR-11-12-08 COMPARISON OF DOE-2.1E WITH ENERGYPLUS AND TRNSYS FOR GROUND COUPLED RESIDENTIAL BUILDINGS IN HOT AND HUMID CLIMATES STAGE 1 “Literature Survey on Slab-on-grade Heat Transfer Models of DOE-2, EnergyPlus and TRNSYS... .................................................................................................................... 4 2. Introduction ........................................................................................................................................... 4 3. Literature Survey on Slab-on-grade Models of DOE-2, EnergyPlus and TRNSYS...

Andolsun, S.; Culp, C.

2011-01-01T23:59:59.000Z

447

Guide for Benchmarking Residential Energy Efficiency Program Progress  

Broader source: Energy.gov [DOE]

Guide for Benchmarking Residential Energy Efficiency Program Progress as part of the DOE Better Buildings Program.

448

Buildings Energy Data Book: 2.5 Residential Construction and Housing Market  

Buildings Energy Data Book [EERE]

8 8 2009 Sales Price and Construction Cost Breakdown of an Average New Single-Family Home ($2010) (1) Function Finished Lot 20% Construction Cost 59% Financing 2% Overhead & General Expenses 5% Marketing 1% Sales Commission 3% Profit 9% Total 100% Function Building Permit Fees 2% Impact Fees 1% Water and Sewer Inspection 2% Excavation, Foundation, & Backfill 7% Steel 1% Framing and Trusses 16% Sheathing 2% Windows 3% Exterior Doors 1% Interior Doors & Hardware 2% Stairs 1% Roof Shingles 4% Siding 6% Gutters & Downspouts 0% Plumbing 5% Electrical Wiring 4% Lighting Fixtures 1% HVAC 4% Insulation 2% Drywall 5% Painting 3% Cabinets, Countertops 6% Appliances 2% Tiles & Carpet 5% Trim Material 3% Landscaping & Sodding 3% Wood Deck/Patio 1% Asphalt Driveway 1% Other 9% Total 100% Note(s): Source(s): NAHB, Breaking Down House Price and Construction Costs, 2010, Table 1; and EIA, Annual Energy Review 2010, Oct. 2011, Appendix D, p. 353 for price

449

Simplified Prescriptive Options in the Texas Residential Building Energy Code Make Compliance Easy  

E-Print Network [OSTI]

.65; SHGCs less than 0.40; R-30 or greater insulation in the ceilings; and R-13 or greater insulation in the walls. B. Building Energy Efficiency Requirements for Additions to Existing Homes and Replacement Windows. Even easier than the IRC...,000 ? 2,499 0.65 0.40 R-30 R-13 R-11 R-5 R-0 R-6 2,500 ? 2,999 0.60 0.40 R-30 R-13 R-19 R-6 R-4, 2 ft. R-7 3,000 ? 3,499 0.55 0.40 R-30 R-13 R-19 R-7 R-4, 2 ft. R-8 3,500 ? 3,999 0.50 Any R-30 R-13 R-19 R-8 R-5, 2 ft. R-10 4...

Stone, G. A.; DeVito, E. M.; Nease, N. H.

2002-01-01T23:59:59.000Z

450

Residential Lighting  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Showerheads Residential Weatherization Performance Tested Comfort Systems Ductless Heat Pumps New Construction Residential Marketing Toolkit Retail Sales Allocation Tool...

451

Residential Weatherization  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Showerheads Residential Weatherization Performance Tested Comfort Systems Ductless Heat Pumps New Construction Residential Marketing Toolkit Retail Sales Allocation Tool...

452

Viability of exterior shading devices for high-rise residential buildings: Case study for cooling energy saving and economic feasibility analysis  

Science Journals Connector (OSTI)

Abstract Proper use of building shading devices can only improve the thermal comfort in indoor environment, but also reduce cooling energy consumption effectively. Researches on this topic have been mostly conducted for office buildings, but were limited for exterior shading devices of high-rise buildings, where cooling is a major energy consumer. This paper presents an integrated approach for exterior shading design analysis about energy performance and economic feasibility in a high-rise residential building (Seoul, Korea) by both numerical simulations and field mock-up test for possibility of installing. The sun-shading/daylighting performance analysis of the 48 exterior shading devices was measured with 4.0 m × 3.2 m window module size during the period of May–September. Furthermore, quantitative analysis of the cooling energy saving potential of solar radiation controls was conducted with DOE-2.1E simulation program. The cooling energy saving potential was about 20%, while the reducing of solar heat gain by the two exterior shading devices (the horizontal overhang and the vertical panel) would lead to a decrease of the cooling energy demand 19.7% and 17.3%, respectively. Cost benefit and economic feasibility was also analyzed, in consideration of the OPEX and CAPEX, depending on the shading type. The significance of this study lies in providing basic information for rational exterior shading planning, when designing high-rise residential buildings.

Jinkyun Cho; Changwoo Yoo; Yundeok Kim

2014-01-01T23:59:59.000Z

453

Emergy-based life cycle assessment (Em-LCA) of multi-unit and single-family residential buildings in Canada  

Science Journals Connector (OSTI)

Abstract The construction and building process depends on substantial consumption of natural resources with far-reaching impacts beyond their development area. In general, a significant portion of annual resource consumption by the building and construction industry is a result of applying traditional building strategies and practices such as designing and selecting types of development (e.g. multi-unit condo and single-family house, etc.), building materials and structure, heating/cooling systems, and planning renovation and maintenance practices. On the other hand, apart from structural suitability, building developers mostly consider the basic requirements of public owners or private occupants of the buildings, where the main criteria for selecting building strategies are costs, and long-term environmental and socio-economic impacts are generally ignored. The main purpose of this paper is to develop an improved building sustainability assessment framework to measure and integrate different sustainability factors, i.e. long-term environmental upstream and downstream impacts and associated socio-economic costs, in a unified and quantitative basis. The application of the proposed framework has been explained through a case study of single-family houses and multi-unit residential buildings in Canada. A comprehensive framework based on the integration of emergy synthesis and life cycle assessment (LCA) has been developed and applied. The results of this research prove that the proposed emergy-based life cycle assessment (Em-LCA) framework offers a practical sustainability assessment tool by providing quantitative and transparent results for informed decision-making.

Bahareh Reza; Rehan Sadiq; Kasun Hewage

2014-01-01T23:59:59.000Z

454

Regional variations in US residential sector fuel prices: implications for development of building energy performance standards  

SciTech Connect (OSTI)

The Notice of Proposed Rulemaking for Energy Performance Standards for New Buildings presented life-cycle-cost based energy budgets for single-family detached residences. These energy budgets varied with regional climatic conditions but were all based on projections of national average prices for gas, oil and electricity. The Notice of Proposed Rulemaking indicated that further analysis of the appropriateness of various price measures for use in setting the Standards was under way. This part of that ongoing analysis addresses the availability of fuel price projections, the variation in fuel prices and escalation rates across the US and the effects of aggregating city price data to the state, Region, or national level. The study only provides a portion of the information required to identify the best price aggregation level for developing of the standards. The research addresses some of the economic efficiency considerations necessary for design of a standard that affects heterogeneous regions. The first section discusses the effects of price variation among and within regions on the efficiency of resource allocation when a standard is imposed. Some evidence of the extreme variability in fuel prices across the US is presented. In the second section, time series, cross-sectional fuel price data are statistically analyzed to determine the similarity in mean fuel prices and price escalation rates when the data are treated at increasing levels of aggregation. The findings of this analysis are reported in the third section, while the appendices contain price distributions details. The last section reports the availability of price projections and discusses some EIA projections compared with actual prices.

Nieves, L.A.; Tawil, J.J.; Secrest, T.J.

1981-03-01T23:59:59.000Z

455

EA-2001: Energy Efficiency Design Standards: New Federal Commercial...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

2001: Energy Efficiency Design Standards: New Federal Commercial and Multi-Family High-Rise Residential Buildings and New Federal Low-Rise Residential Buildings EA-2001: Energy...

456

EA-1871: Final Environmental Assessment  

Broader source: Energy.gov [DOE]

Energy Efficiency Design Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings and New Federal Low-Rise Residential Buildings

457

ConEd (Electric) - Residential Energy Efficiency Incentives Program |  

Broader source: Energy.gov (indexed) [DOE]

ConEd (Electric) - Residential Energy Efficiency Incentives Program ConEd (Electric) - Residential Energy Efficiency Incentives Program ConEd (Electric) - Residential Energy Efficiency Incentives Program < Back Eligibility Installer/Contractor Low-Income Residential Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Home Weatherization Commercial Weatherization Sealing Your Home Ventilation Heating Heat Pumps Appliances & Electronics Water Heating Program Info State New York Program Type Utility Rebate Program Rebate Amount Central A/C: $400 or $600 Central Air Source Heat Pump: $400 or $600 Electric Heat Pump Water Heater: $400 Energy Star Thermostats: up to $25 Duct Sealing: $100/hr Air Sealing: $75/hr Refrigerator/Freezer Recycling: $50 Con Edison is offering the Residential HVAC Electric Rebate Program.

458

Residential Solar Sales Tax Exemption | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Residential Solar Sales Tax Exemption Residential Solar Sales Tax Exemption Residential Solar Sales Tax Exemption < Back Eligibility Commercial General Public/Consumer Industrial Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Solar Heating Buying & Making Electricity Swimming Pool Heaters Water Heating Program Info Start Date 09/01/2005 State New York Program Type Sales Tax Incentive Rebate Amount 100% exemption from state sales tax Provider New York State Department of Taxation and Finance New York enacted legislation in July 2005 exempting the sale and installation of residential solar-energy systems from the state's sales and compensating use taxes. The exemption was extended to non-residential solar systems in August 2012 (S.B. 3203), effective beginning January 1, 2013.

459

Southwest Gas Corporation - Residential and Builder Efficiency Rebate  

Broader source: Energy.gov (indexed) [DOE]

Southwest Gas Corporation - Residential and Builder Efficiency Southwest Gas Corporation - Residential and Builder Efficiency Rebate Program (Arizona) Southwest Gas Corporation - Residential and Builder Efficiency Rebate Program (Arizona) < Back Eligibility Construction Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Appliances & Electronics Water Heating Windows, Doors, & Skylights Maximum Rebate Residential: 2 per household Program Info State Arizona Program Type Utility Rebate Program Rebate Amount Residential Natural Gas Tankless Water Heater: $450 Natural Gas Clothes Dryer: $30 Windows: $0.95/sq ft Attic Insulation: $0.15/sq ft Floor Insulation: $0.30/sq ft Builders Energy Star Certified Home: $450 Natural Gas Tankless Water Heater: $450 Attic Insulation: $0.15/sq ft

460

Comparison of measurement indices of noise intrusions in multi?family housing  

Science Journals Connector (OSTI)

Methods for measuring sound levels associated with transportation impact and airborne sound intrusions in multi?family housing are well established in the field. This paper compares field testing of assemblies where complaints and retrofits have been involved where traditional assessments of intruding noises showed compliance with design criteria but where residents and/or building owners perceived problems. Case study 1 involves noise from airplanes approaching a runway at a large international airport as heard in an all?glass high?rise condominium evaluated by LDNs and SELs of actual flyovers in computer models and in a full size mock?up of a typical unit built on site. Case study 2 involves noise from outdoor amplified entertainment propagating into neighborhoods as evaluated by various noise ordinance criteria. Case study 3 involves footstep noise through flooring systems comparing IIC ratings with actual sound pressure levels of people walking on floors above. Case study 4 compares noise and vibration levels for various pieces of mechanical equipment before and after retrofit with NC RC and other room criteria. Auralizations of the case studies will be shown along with measurement data to illustrate the diagnostics made in each case.

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

SMUD - Residential Energy Efficiency Rebate Program | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Rebate Program Rebate Program SMUD - Residential Energy Efficiency Rebate Program < Back Eligibility Installer/Contractor Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Commercial Heating & Cooling Cooling Appliances & Electronics Heat Pumps Commercial Lighting Lighting Insulation Design & Remodeling Windows, Doors, & Skylights Sealing Your Home Ventilation Water Heating Maximum Rebate Contact SMUD for individual program or equipment maximum amounts Program Info Expiration Date 12/31/2013 State California Program Type Utility Rebate Program Rebate Amount Home Performance Program: up to $5,000 Multi-Family Housing Program: $500 for 10% energy savings plus $40 for each additional percentage Central A/C and/or Heat Pump: $400 - $1,100

462

Model building codes and acoustical performance: Where are we in 2003?  

Science Journals Connector (OSTI)

The proper acoustical design for multi?family dwellings is an important factor in occupant comfort. Key acoustical design practices are often not mandated by the builder or architect but by the applicable building codes. In early 2003 the three regional/national building codes agreed to join into a single unified national building code for residential and commercial construction. The scope and governance of these three codes: the Uniform Building Code (ICBO) the National Building Code (BOCA) the Southern Building Code (SBCCI) are reflected in the International Residential Code (IRC) and the International Building Code (IBC) which was developed by the International Code Council (ICC). With the move to a single code body those concerned with building acoustical performance welcome the benefit of a single minimum standard. Unfortunately this new minimum performance requirement does not reflect the state of the science for occupant satisfaction. The acoustical requirements of each of these building codes the timeline of their development and an overview of the state of the science will be presented. Suggestions for revised performance minimums will also be offered for discussion.

2003-01-01T23:59:59.000Z

463

Residential Solar Tax Credit | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Solar Tax Credit Solar Tax Credit Residential Solar Tax Credit < Back Eligibility Multi-Family Residential Residential Savings Category Solar Buying & Making Electricity Heating & Cooling Commercial Heating & Cooling Heating Water Heating Maximum Rebate 5,000 for solar-energy systems Program Info Start Date 01/01/1998 (solar electric); 01/01/2006 (solar thermal) State New York Program Type Personal Tax Credit Rebate Amount 25% for solar-electric (PV) and solar-thermal systems; for third-party owned systems this is in reference to the aggregate amount owed under the contract rather than the amount owed in any single year Provider New York State Department of Taxation and Finance Enacted in August 1997, this personal income tax credit originally applied to expenditures on solar-electric (PV) equipment used on residential

464

Predicting Envelope Leakage in Attached Dwellings (Fact Sheet), Building America Case Study: Technology Solutions for New and Existing Homes, Building Technologies Office (BTO)  

Broader source: Energy.gov (indexed) [DOE]

Predicting Envelope Leakage Predicting Envelope Leakage in Attached Dwellings PROJECT INFORMATION Project Name: Predicting Envelope Leakage in Attached Dwellings Consortium for Advanced Residential Buildings www.carb-swa.com Building Component: Building Envelope Application: New and retrofit; Multi-family Year Tested: 2013 Applicable Climate Zone(s): All POTENTIAl BENEFITs Requires substantially fewer resources in the field-equipment, personnel, and time Does not require simultaneous access to multiple housing units-extremely difficult in occupied housing Provides a more appropriate assessment of envelope leakage and the potential energy benefits of air sealing than the commonly used total leakage test The most common method of measuring air leakage is to perform single (or solo) blower door pressurization and/or depressurization test. In detached hous-

465

Focus Series: Maine—Residential Direct Install Program  

Broader source: Energy.gov [DOE]

Better Buildings Neighborhood Program Focus Series: Maine—Residential Direct Install Program: Residential Air Sealing Program Drives Maine Home Energy Savings Through the Roof.

466

Questar Gas - Residential Energy Efficiency Rebate Programs (Idaho) |  

Broader source: Energy.gov (indexed) [DOE]

Programs (Idaho) Programs (Idaho) Questar Gas - Residential Energy Efficiency Rebate Programs (Idaho) < Back Eligibility Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Sealing Your Home Ventilation Appliances & Electronics Water Heating Windows, Doors, & Skylights Maximum Rebate Limit of one rebate per appliance type Duct Sealing/Insulation: $450 (Single Family); $250 (Multifamily) Program Info State Idaho Program Type Utility Rebate Program Rebate Amount Furnace: $200-$400 Solar Assisted Water Heater: $750 Storage Water Heater: $50-$100 Gas Condensing/Hybrid Water Heater: $350 Tankless Water Heater: $300-$350 Boiler: $400 - $600 Solar Hot Water Heater: $750 Gas Clothes Washer: $50

467

The Best Way to Meet ASHRAE 62.2 in Multifamily Buildings  

Broader source: Energy.gov (indexed) [DOE]

BEST WAY TO MEET BEST WAY TO MEET ASHRAE 62.2 IN MULTIFAMILY BUILDINGS Iain Walker (LBNL) Building America Meeting 2013 ASHRAE 62.2 - 2013  Replaced previous 62-89 to be specifically for low-rise (under four story) residential  Under continuous revision  Current version is 2013  Has new section 8 for multi- family  A building = a unit  Applies to all units Local Exhaust  Local exhaust fans must be installed in bathrooms and kitchens  Must exhaust to outside  Bathrooms  50 CFM on-demand, or  20 CFM continuous.  Kitchen  100 CFM on-demand, or  5 ACH continuous, based on kitchen volume. Exception for existing units  Increase whole unit ventilation if lacking kitchen and bathroom exhausts  Missing exhausts are a "deficit"

468

New Jersey SmartStart Buildings - Pay for Performance Program | Department  

Broader source: Energy.gov (indexed) [DOE]

New Jersey SmartStart Buildings - Pay for Performance Program New Jersey SmartStart Buildings - Pay for Performance Program New Jersey SmartStart Buildings - Pay for Performance Program < Back Eligibility Commercial Fed. Government Industrial Institutional Local Government Multi-Family Residential Nonprofit Schools State Government Savings Category Heating & Cooling Commercial Heating & Cooling Heating Cooling Home Weatherization Construction Commercial Weatherization Design & Remodeling Other Appliances & Electronics Commercial Lighting Lighting Manufacturing Maximum Rebate Varies for each program milestone $1 M per utility account (gas and electric) per year $2 M per project $4 M per entity per year Program Info State New Jersey Program Type State Rebate Program Rebate Amount $/kWh, $/therm, and $/sq. ft. incentives, vary based on expected energy

469

City of Detroit - SmartBuildings Detroit Green Fund Loan | Department of  

Broader source: Energy.gov (indexed) [DOE]

City of Detroit - SmartBuildings Detroit Green Fund Loan City of Detroit - SmartBuildings Detroit Green Fund Loan City of Detroit - SmartBuildings Detroit Green Fund Loan < Back Eligibility Commercial Institutional Local Government Multi-Family Residential State Government Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Sealing Your Home Cooling Other Heat Pumps Appliances & Electronics Commercial Lighting Lighting Insulation Design & Remodeling Windows, Doors, & Skylights Water Buying & Making Electricity Energy Sources Solar Water Heating Wind Maximum Rebate 40% of eligible costs, up to $100,000 Program Info Funding Source The American Reinvestment and Recovery Act (ARRA) of 2009; State Energy Program State Michigan Program Type Local Loan Program

470

Comparison of DOE-2.1E with Energyplus and TRNSYS for Ground Coupled Residential Buildings in Hot anf Humid Climates Stage 4  

E-Print Network [OSTI]

ESL-TR-12-02-02 COMPARISON OF DOE-2.1E WITH ENERGYPLUS AND TRNSYS FOR GROUND COUPLED RESIDENTIAL BUILDINGS IN HOT AND HUMID CLIMATES STAGE 4 “Fully Loaded IECC Compliant Slab-on-grade Houses in the Four U.S. Climates” A Report...F/Btu) Rfic resistance of the fictitious insulation layer (hr-ft2-oF/Btu) GI ground isolated EP modeled with EnergyPlus D2 modeled with DOE-2 TR modeled with TRNSYS GCW ground coupled with Winkelmann’s slab-on-grade model GCS ground coupled with Slab...

Andolsun, S.; Culp, C.

2012-01-01T23:59:59.000Z

471

Improvement in impact insulation ratings of common floor/ceiling assemblies in multi?family dwellings with standard floor coverings  

Science Journals Connector (OSTI)

Improvement in the field?rated impact insulation class [FIIC] was measured for several common floor/ceiling assemblies in existing multi?family buildings utilizing several standard grades of carpet pad and various vinyl products. Testing included determination of FIIC ratings with existing floor coverings and with other more effective floor coverings including ordinary cushioned vinyl thickly cushion?backed vinyl and vinyl products with fiber board and particle board underlayment. Test results indicate that a significant improvement in the FIIC ratings of existing vinyl covered floor/ceiling assemblies can be achieved by the superposition of an appropriate cushioned vinyl on top of the existing standard vinyl. The test results also indicate that a significant increase in FIIC ratings of existing carpeted floor/ceiling assemblies can be achieved by appropriate selection of new pad and carpet. Test data from measurements performed in accordance with ISO recommendation R140 are presented in the paper for several representative configurations.

Stanley M. Rosen

1981-01-01T23:59:59.000Z

472

Independence Power and Light - Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov (indexed) [DOE]

Independence Power and Light - Residential Energy Efficiency Rebate Independence Power and Light - Residential Energy Efficiency Rebate Program Independence Power and Light - Residential Energy Efficiency Rebate Program < Back Eligibility Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Heat Pumps Appliances & Electronics Water Heating Program Info State Missouri Program Type Utility Rebate Program Rebate Amount Central A/C: $109 - $384 Heat Pumps: $259 - $701 Heat Pumps Water Heaters: $300 Provider Independence Power and Light Independence Power and Light (IPL) offers rebates to residential customers for purchasing new, energy efficient appliances. Rebates are available on central air conditioning systems, heat pumps, and water heaters. Rebates on equipment vary based upon size, capacity, and efficiency of the unit. See

473

Kansas City Power and Light - Cool Homes Residential Rebate Program |  

Broader source: Energy.gov (indexed) [DOE]

Kansas City Power and Light - Cool Homes Residential Rebate Program Kansas City Power and Light - Cool Homes Residential Rebate Program Kansas City Power and Light - Cool Homes Residential Rebate Program < Back Eligibility Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Heat Pumps Program Info State Missouri Program Type Utility Rebate Program Rebate Amount SEER 14/15: $650 SEER 16/Greater: $850 Provider Kansas City Power and Light Kansas City Power and Light (KCP&L) offers rebates to residential customers to help offset the cost of replacing inefficient central AC and heat pump systems with newer, more efficient models. In order to qualify for a rebate, the system being replaced must have an EER of 8.0 or less, as tested by a CheckMe!-trained HVAC contractor. The replacement of "dead"

474

CPS Energy - New Residential Construction Incentives | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

CPS Energy - New Residential Construction Incentives CPS Energy - New Residential Construction Incentives CPS Energy - New Residential Construction Incentives < Back Eligibility Construction Multi-Family Residential Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Program Info Start Date 01/01/2010 State Texas Program Type Utility Rebate Program Rebate Amount Energy Star Compliant (HERS Rating 75-58): $800/structure Energy Star Compliant (HERS rating 57 or less): $1,500/structure Other Rating Methods(15% to 30% above code): $800/structure Other Rating Methods(31% or greater above code): $1,500/structure Provider CPS Energy CPS Energy offers incentives for new residential construction that is at least 15% more efficient than required by the

475

Colorado Springs Utilities - Residential Energy Efficiency Rebate Program |  

Broader source: Energy.gov (indexed) [DOE]

Residential Energy Efficiency Rebate Residential Energy Efficiency Rebate Program Colorado Springs Utilities - Residential Energy Efficiency Rebate Program < Back Eligibility Multi-Family Residential Residential Savings Category Home Weatherization Windows, Doors, & Skylights Commercial Weatherization Appliances & Electronics Sealing Your Home Ventilation Maximum Rebate Visit website for details Program Info State Colorado Program Type Utility Rebate Program Rebate Amount Duct Sealing: 40% of job up to $100 Dishwasher: $50 Gas Boiler: $250 Gas Furnace: $250 Gas Water Heater: $50 Insulation and Air Sealing: 40% of job up to $200 Irrigation: varies Refrigerator: $50 + $50 recycle bonus Toilets: up to $75 (max 2) Windows: $4.67/sq ft, up to $200 Provider Residential Efficiency Incentives Colorado Springs Utilities offers a variety of energy and water efficiency

476

National Fuel (Gas) - Residential Energy Efficiency Rebates | Department of  

Broader source: Energy.gov (indexed) [DOE]

National Fuel (Gas) - Residential Energy Efficiency Rebates National Fuel (Gas) - Residential Energy Efficiency Rebates National Fuel (Gas) - Residential Energy Efficiency Rebates < Back Eligibility Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Appliances & Electronics Water Heating Maximum Rebate Rebate amount cannot exceed the purchase price Program Info Start Date 1/1/2013 Expiration Date 3/31/2014 State New York Program Type Utility Rebate Program Rebate Amount Furnace: $250 Forced Air Furnace with ECM: $350 Hot Water Boiler: $350 Steam Boiler: $200 Programmable Thermostat: $25 Indirect Water Heater: $250 Provider Energy Federation Incorporated (EFI) National Fuel offers pre-qualified equipment rebates for the installation of certain energy efficiency measures to residential customers in Western

477

Duquesne Light Company - Residential Solar Water Heating Program |  

Broader source: Energy.gov (indexed) [DOE]

Duquesne Light Company - Residential Solar Water Heating Program Duquesne Light Company - Residential Solar Water Heating Program Duquesne Light Company - Residential Solar Water Heating Program < Back Eligibility Multi-Family Residential Residential Savings Category Heating & Cooling Solar Water Heating Program Info Start Date 11/30/2009 Expiration Date 03/31/2013 State Pennsylvania Program Type Utility Rebate Program Rebate Amount $286/system Provider Duquesne Light Company Duquesne Light provides rebates to its residential customers for purchasing and installing qualifying solar water heating systems. Eligible systems may receive a flat rebate of $286 per qualifying system. Various equipment, installation, contractor, and warranty requirements apply, as summarized above and described in more detail in program documents. Customers must

478

Xcel Energy - Residential and Low Income Home Energy Service | Department  

Broader source: Energy.gov (indexed) [DOE]

Xcel Energy - Residential and Low Income Home Energy Service Xcel Energy - Residential and Low Income Home Energy Service Xcel Energy - Residential and Low Income Home Energy Service < Back Eligibility Installer/Contractor Low-Income Residential Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Commercial Heating & Cooling Cooling Other Sealing Your Home Ventilation Heat Pumps Appliances & Electronics Commercial Lighting Lighting Water Heating Windows, Doors, & Skylights Program Info Start Date 1/1/2011 Expiration Date 12/31/2012 State New Mexico Program Type Utility Rebate Program Rebate Amount Evaporative Cooling: $200-$1000/unit Saver's Switch A/C Cycling: $20/ton of enrolled air conditioning Refrigerator Recycling: $75 CFLs: $1/bulb LED's: $10/bulb

479

Penelec - Residential Energy Efficiency Programs | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Penelec - Residential Energy Efficiency Programs Penelec - Residential Energy Efficiency Programs Penelec - Residential Energy Efficiency Programs < Back Eligibility Construction Low-Income Residential Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Sealing Your Home Heating & Cooling Commercial Heating & Cooling Cooling Appliances & Electronics Other Ventilation Heat Pumps Commercial Lighting Lighting Water Heating Windows, Doors, & Skylights Maximum Rebate Whole House Program: $900 Program Info Funding Source Pennsylvania Electric Company (Penelec), Metropolitan Edison Company (Met-Ed), and Pennsylvania Power Company (PennPower) Start Date 10/29/2009 Expiration Date 5/31/2013 State Pennsylvania Program Type Utility Rebate Program Rebate Amount PA Energy Efficient New Homes Program: $1000 - $10,000 based on % savings

480

Cowlitz County PUD - Residential Weatherization Plus Program | Department  

Broader source: Energy.gov (indexed) [DOE]

Cowlitz County PUD - Residential Weatherization Plus Program Cowlitz County PUD - Residential Weatherization Plus Program Cowlitz County PUD - Residential Weatherization Plus Program < Back Eligibility Low-Income Residential Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Construction Commercial Heating & Cooling Design & Remodeling Sealing Your Home Ventilation Windows, Doors, & Skylights Program Info State District of Columbia Program Type Utility Rebate Program Rebate Amount Site-Built Home Attic Insulation, existing below R-19: $0.70/sq. ft. Attic Insulation, existing R-19 or above: $0.40/sq. ft. Floor Insulation: $0.40/sq. ft. Wall Insulation (blown in): $0.70/sq. ft. Knee Wall Insulation (batts): $0.25/sq. ft. Replacement Windows: $6.00/sq. ft.

Note: This page contains sample records for the topic "multi-family residential building" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.