National Library of Energy BETA

Sample records for mph avg dc

  1. Property:AvgGeoFluidTemp | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceII JumpQuarterly SmartDB-2,Information PromotingPropertyAvgGeoFluidTemp Jump

  2. Property:AvgReservoirDepth | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceII JumpQuarterly SmartDB-2,Information PromotingPropertyAvgGeoFluidTemp

  3. WELCOME DAY MS/PhD and MPH Prospective Students

    E-Print Network [OSTI]

    Sheridan, Jennifer

    for Public Health Javier Nieto, MD, PhD, MPH Chair, Department of Population Health Sciences 9:30 UW Population Health Distinguished Alumni Lecture (1325 HSLC) Christopher T. Sempos, PhD, Director, Population student by sitting in on this required MPH course, taught by Director, Tom Oliver, PhD, MHA. Class runs

  4. Cancer Research in Botswana Surbhi Grover, MD MPH

    E-Print Network [OSTI]

    Bushman, Frederic

    Cancer Research in Botswana Surbhi Grover, MD MPH Assistant Professor, Radiation Oncology, UPENN and are developing cancers and other NCDs #12;3 HIV and Cancer wHIV infection increases the risk of cancer wIn the later stages of HIV infection, chronic immunosuppression (& other co-factors) leads to cancer formation

  5. Poster Presentations Marcella Alsan, MD, MPH, PhD

    E-Print Network [OSTI]

    Kay, Mark A.

    15 Poster Presentations Marcella Alsan, MD, MPH, PhD The direct and indirect effects of mass vaccination: Evidence from the 1985 Turkish campaign Michele Barry, MD; Stephen Luby, MD; Nancy Federspiel, PhD Global Health Fellows and Scholars Consortium Cynthia M. Castro, PhD; Abby C. King, PhD; Marcia Stefanick

  6. The MPH Faculty -Department of Family Medicine & Public Health Sciences Joel Ager, PhD Division of Population Health Sciences

    E-Print Network [OSTI]

    Cinabro, David

    The MPH Faculty - Department of Family Medicine & Public Health Sciences Joel Ager, PhD Division of Population Health Sciences Bengt Arnetz, MD, PhD, MPH Director, Div. of Occupational & Environ. Health Judith Arnetz, PhD Division of Occupational & Environmental Health David Bassett, PhD Graduate Student Officer

  7. Census Snapshot: Washington, DC

    E-Print Network [OSTI]

    Romero, Adam P.; Baumle, Amanda K; Badgett, M.V. Lee; Gates, Gary J

    2007-01-01

    INSTITUTE CENSUS SNAPSHOT | WASHINGTON, DC. | DECEMBER 2007WASHINGTON, D.C. Adam P. Romero, Public Policy Fellow AmandaINSTITUTE CENSUS SNAPSHOT | WASHINGTON, DC. | DECEMBER 2007

  8. Herbert Duber, MD, MPH Assistant Professor, Division of Emergency Medicine, University of Washington

    E-Print Network [OSTI]

    Brent, Roger

    of improved outcomes in low- and middle-income countries. Dr. Duber has worked clinically, served in public. For IHME's Impact Evaluations and Monitoring Costs research teams, he is leading work looking received his medical degree from the NYU School of Medicine and his MPH in International Health from

  9. Radio frequency dc-dc power conversion

    E-Print Network [OSTI]

    Rivas, Juan, 1976-

    2007-01-01

    THIS THESIS addresses the development of system architectures and circuit topologies for dc-dc power conversion at very high frequencies. The systems architectures that are developed are structured to overcome limitations ...

  10. Building Scale DC Microgrids

    E-Print Network [OSTI]

    Marnay, Chris

    2013-01-01

    however, DC was less amenable to transmission over longtransmission 32 km to Buffalo, even though the loads at that time were entirely DC.

  11. Building Scale DC Microgrids

    E-Print Network [OSTI]

    Marnay, Chris

    2014-01-01

    ABORATORY Building Scale DC Microgrids Chris Marnay, Stevenemployer. Building Scale DC Microgrids Chris Marnay, IEEEgenerally known as microgrids (or µgrids). The dominance of

  12. DC source assemblies

    DOE Patents [OSTI]

    Campbell, Jeremy B; Newson, Steve

    2013-02-26

    Embodiments of DC source assemblies of power inverter systems of the type suitable for deployment in a vehicle having an electrically grounded chassis are provided. An embodiment of a DC source assembly comprises a housing, a DC source disposed within the housing, a first terminal, and a second terminal. The DC source also comprises a first capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the first terminal. The DC source assembly further comprises a second capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the second terminal.

  13. Building Scale DC Microgrids

    E-Print Network [OSTI]

    Marnay, Chris

    2014-01-01

    involves DC directly, e.g. fuel cells, fuels, but electricthe likely emergence of fuel cells and required batteriesphotovoltaic cells, fuel cells, power quality, converters,

  14. Building Scale DC Microgrids

    E-Print Network [OSTI]

    Marnay, Chris

    2013-01-01

    the likely emergence of fuel cells and required batteriesphotovoltaic cells, fuel cells, power quality, converters,DC) generation, e.g. fuel cells (FCs), from combustion

  15. Building Scale DC Microgrids

    E-Print Network [OSTI]

    Marnay, Chris

    2013-01-01

    resources, a 10 kW vertical axis wind turbine, and Fig. 4AC-grid Fig. 3. Vertical axis wind turbine in the AIT DC µ

  16. Building Scale DC Microgrids

    E-Print Network [OSTI]

    Marnay, Chris

    2014-01-01

    resources, a 10 kW vertical axis wind turbine, and Fig. 4the µgrid Fig. 3. Vertical axis wind turbine in the AIT DC µ

  17. Multilevel DC link inverter

    DOE Patents [OSTI]

    Su, Gui-Jia

    2003-06-10

    A multilevel DC link inverter and method for improving torque response and current regulation in permanent magnet motors and switched reluctance motors having a low inductance includes a plurality of voltage controlled cells connected in series for applying a resulting dc voltage comprised of one or more incremental dc voltages. The cells are provided with switches for increasing the resulting applied dc voltage as speed and back EMF increase, while limiting the voltage that is applied to the commutation switches to perform PWM or dc voltage stepping functions, so as to limit current ripple in the stator windings below an acceptable level, typically 5%. Several embodiments are disclosed including inverters using IGBT's, inverters using thyristors. All of the inverters are operable in both motoring and regenerating modes.

  18. DC attenuation meter

    DOE Patents [OSTI]

    Hargrove, Douglas L.

    2004-09-14

    A portable, hand-held meter used to measure direct current (DC) attenuation in low impedance electrical signal cables and signal attenuators. A DC voltage is applied to the signal input of the cable and feedback to the control circuit through the signal cable and attenuators. The control circuit adjusts the applied voltage to the cable until the feedback voltage equals the reference voltage. The "units" of applied voltage required at the cable input is the system attenuation value of the cable and attenuators, which makes this meter unique. The meter may be used to calibrate data signal cables, attenuators, and cable-attenuator assemblies.

  19. DC arc weld starter

    DOE Patents [OSTI]

    Campiotti, Richard H. (Tracy, CA); Hopwood, James E. (Oakley, CA)

    1990-01-01

    A system for starting an arc for welding uses three DC power supplies, a high voltage supply for initiating the arc, an intermediate voltage supply for sustaining the arc, and a low voltage welding supply directly connected across the gap after the high voltage supply is disconnected.

  20. Auxiliary resonant DC tank converter

    DOE Patents [OSTI]

    Peng, Fang Z. (Knoxville, TN)

    2000-01-01

    An auxiliary resonant dc tank (ARDCT) converter is provided for achieving soft-switching in a power converter. An ARDCT circuit is coupled directly across a dc bus to the inverter to generate a resonant dc bus voltage, including upper and lower resonant capacitors connected in series as a resonant leg, first and second dc tank capacitors connected in series as a tank leg, and an auxiliary resonant circuit comprising a series combination of a resonant inductor and a pair of auxiliary switching devices. The ARDCT circuit further includes first clamping means for holding the resonant dc bus voltage to the dc tank voltage of the tank leg, and second clamping means for clamping the resonant dc bus voltage to zero during a resonant period. The ARDCT circuit resonantly brings the dc bus voltage to zero in order to provide a zero-voltage switching opportunity for the inverter, then quickly rebounds the dc bus voltage back to the dc tank voltage after the inverter changes state. The auxiliary switching devices are turned on and off under zero-current conditions. The ARDCT circuit only absorbs ripples of the inverter dc bus current, thus having less current stress. In addition, since the ARDCT circuit is coupled in parallel with the dc power supply and the inverter for merely assisting soft-switching of the inverter without participating in real dc power transmission and power conversion, malfunction and failure of the tank circuit will not affect the functional operation of the inverter; thus a highly reliable converter system is expected.

  1. Improved DC Gun Insulator

    SciTech Connect (OSTI)

    M.L. Neubauer, K.B. Beard, R. Sah, C. Hernandez-Garcia, G. Neil

    2009-05-01

    Many user facilities such as synchrotron light sources and free electron lasers require accelerating structures that support electric fields of 10-100 MV/m, especially at the start of the accelerator chain where ceramic insulators are used for very high gradient DC guns. These insulators are difficult to manufacture, require long commissioning times, and have poor reliability, in part because energetic electrons bury themselves in the ceramic, creating a buildup of charge and causing eventual puncture. A novel ceramic manufacturing process is proposed. It will incorporate bulk resistivity in the region where it is needed to bleed off accumulated charge caused by highly energetic electrons. This process will be optimized to provide an appropriate gradient in bulk resistivity from the vacuum side to the air side of the HV standoff ceramic cylinder. A computer model will be used to determine the optimum cylinder dimensions and required resistivity gradient for an example RF gun application. A ceramic material example with resistivity gradient appropriate for use as a DC gun insulator will be fabricated by glazing using doping compounds and tested.

  2. Design Considerations for Very High Frequency dc-dc Converters

    E-Print Network [OSTI]

    Perreault, Dave

    the gating power while ensuring fast on- off transitions of the semiconductor switch. The rectifier of switching power converters operating at greatly increased switching frequencies. Greatly increasedDesign Considerations for Very High Frequency dc-dc Converters Juan M. Rivas, David Jackson, Olivia

  3. Aalborg Universitet Power flow analysis for DC voltage droop controlled DC microgrids

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    Aalborg Universitet Power flow analysis for DC voltage droop controlled DC microgrids Li, Chendan). Power flow analysis for DC voltage droop controlled DC microgrids. In Proceedings of the 11th.aau.dk on: juli 07, 2015 #12;Power flow analysis for DC voltage droop controlled DC microgrids Chendan Li

  4. Triple voltage dc-to-dc converter and method

    DOE Patents [OSTI]

    Su, Gui-Jia (Knoxville, TN)

    2008-08-05

    A circuit and method of providing three dc voltage buses and transforming power between a low voltage dc converter and a high voltage dc converter, by coupling a primary dc power circuit and a secondary dc power circuit through an isolation transformer; providing the gating signals to power semiconductor switches in the primary and secondary circuits to control power flow between the primary and secondary circuits and by controlling a phase shift between the primary voltage and the secondary voltage. The primary dc power circuit and the secondary dc power circuit each further comprising at least two tank capacitances arranged in series as a tank leg, at least two resonant switching devices arranged in series with each other and arranged in parallel with the tank leg, and at least one voltage source arranged in parallel with the tank leg and the resonant switching devices, said resonant switching devices including power semiconductor switches that are operated by gating signals. Additional embodiments having a center-tapped battery on the low voltage side and a plurality of modules on both the low voltage side and the high voltage side are also disclosed for the purpose of reducing ripple current and for reducing the size of the components.

  5. Multi-Level DC/DC Power Conversion System with Multiple DC Sources

    E-Print Network [OSTI]

    Tolbert, Leon M.

    boost converter. Experimental results are provided to confirm the analysis and control concept. I, instead of connecting all batteries in series as one power source and a bi-directional boost converter. INTRODUCTION Traditional dc/dc converters require at least one inductive component, which is bulky, heavy

  6. DC-DC converter current source fed naturally commutated brushless DC motor drive 

    E-Print Network [OSTI]

    Khopkar, Rahul Vijaykumar

    2004-11-15

    the hard switchings by natural turn-off, thereby eliminating the heatsinks as well as the large dc link capacitor. A controlled rectifier together with a large inductor act as the current source. The only disadvantage is the large value of the dc link...

  7. Bi-Directional DC-DC Converter for PHEV Applications

    SciTech Connect (OSTI)

    Abas Goodarzi

    2011-01-31

    Plug-In Hybrid Electric Vehicles (PHEV) require high power density energy storage system (ESS) for hybrid operation and high energy density ESS for Electric Vehicle (EV) mode range. However, ESS technologies to maximize power density and energy density simultaneously are not commercially feasible. The use of bi-directional DC-DC converter allows use of multiple energy storage, and the flexible DC-link voltages can enhance the system efficiency and reduce component sizing. This will improve fuel consumption, increase the EV mode range, reduce the total weight, reduce battery initial and life cycle cost, and provide flexibility in system design.

  8. DC Pro Software Tool Suite

    SciTech Connect (OSTI)

    2009-04-01

    This fact sheet describes how DOE's Data Center Energy Profiler (DC Pro) Software Tool Suite and other resources can help U.S. companies identify ways to improve the efficiency of their data centers.

  9. Catalog of DC Appliances and Power Systems

    SciTech Connect (OSTI)

    Garbesi, Karina; Vossos, Vagelis; Shen, Hongxia

    2010-10-13

    This document catalogs the characteristics of current and potential future DC products and power systems.

  10. Interaction of DC-DC converters and submarine power cables in offshore wind farm DC networks 

    E-Print Network [OSTI]

    Wood, Thomas Benedict

    2014-06-30

    Offshore wind power is attracting increasing levels of research and investment. The use of HVDC transmission and the development of DC grids are topics with similar high levels of interest that go hand in hand with the ...

  11. Generating Isolated Outputs in a Multilevel Modular Capacitor Clamped DC-DC Converter

    E-Print Network [OSTI]

    Tolbert, Leon M.

    -dc converters based on inductive energy transfer method (IETM) such as buck, boost, and buck-boost converter967 Generating Isolated Outputs in a Multilevel Modular Capacitor Clamped DC-DC Converter (MMCCC clamped dc-dc converter. The multilevel modular capacitor clamped converter (MMCCC) has several key

  12. Light-weight DC to very high voltage DC converter

    DOE Patents [OSTI]

    Druce, R.L.; Kirbie, H.C.; Newton, M.A.

    1998-06-30

    A DC-DC converter capable of generating outputs of 100 KV without a transformer comprises a silicon opening switch (SOS) diode connected to allow a charging current from a capacitor to flow into an inductor. When a specified amount of charge has flowed through the SOS diode, it opens up abruptly; and the consequential collapsing field of the inductor causes a voltage and current reversal that is steered into a load capacitor by an output diode. A switch across the series combination of the capacitor, inductor, and SOS diode closes to periodically reset the SOS diode by inducing a forward-biased current. 1 fig.

  13. Switching coordination of distributed dc-dc converters for highly efficient photovoltaic power plants

    DOE Patents [OSTI]

    Agamy, Mohammed; Elasser, Ahmed; Sabate, Juan Antonio; Galbraith, Anthony William; Harfman Todorovic, Maja

    2014-09-09

    A distributed photovoltaic (PV) power plant includes a plurality of distributed dc-dc converters. The dc-dc converters are configured to switch in coordination with one another such that at least one dc-dc converter transfers power to a common dc-bus based upon the total system power available from one or more corresponding strings of PV modules. Due to the coordinated switching of the dc-dc converters, each dc-dc converter transferring power to the common dc-bus continues to operate within its optimal efficiency range as well as to optimize the maximum power point tracking in order to increase the energy yield of the PV power plant.

  14. DC to DC power converters and methods of controlling the same

    SciTech Connect (OSTI)

    Steigerwald, Robert Louis; Elasser, Ahmed; Sabate, Juan Antonio; Todorovic, Maja Harfman; Agamy, Mohammed

    2012-12-11

    A power generation system configured to provide direct current (DC) power to a DC link is described. The system includes a first power generation unit configured to output DC power. The system also includes a first DC to DC converter comprising an input section and an output section. The output section of the first DC to DC converter is coupled in series with the first power generation unit. The first DC to DC converter is configured to process a first portion of the DC power output by the first power generation unit and to provide an unprocessed second portion of the DC power output of the first power generation unit to the output section.

  15. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    5V DC USB power from wall sockets. .. 52 viprovides 5V DC USB power from wall sockets. Reproduced withPower over Ethernet 51 Universal Serial Bus Wall

  16. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    main conclusions about off-grid markets for DC appliances,and power systems. Mature Off-Grid Markets for DC Appliancesapplications include off-grid residential, telecom, remote

  17. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    AEE Solar. 2010 Renewable Energy Design Guide and Catalog.2009, 2010, Interstate Renewable Energy Council. RetrievedDC) generated by on-site renewable energy systems in its DC

  18. Ecological benefits of dc power transmission

    SciTech Connect (OSTI)

    Kutuzova, N. B.

    2011-05-15

    The environmental effects of dc overhead transmission lines are examined. The major effects of ac and dc transmission lines are compared. Dc lines have advantages compared to ac lines in terms of electrical safety for people under the lines, biological effects, corona losses, and clearance width.

  19. Analysis and Optimization of Switched-Capacitor DC-DC Converters

    E-Print Network [OSTI]

    Sanders, Seth

    on conduction loss) of a ladder-type converter is found to be superior to that of a conventional boost converterAnalysis and Optimization of Switched-Capacitor DC-DC Converters Michael D. Seeman, Seth R. Sanders­ Analysis methods are developed that fully determine a switched-capacitor (SC) dc-dc converter's steady

  20. QER Public Meeting in Washington, DC: Enhancing Energy Infrastructure...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Washington, DC: Enhancing Energy Infrastructure Resiliency and Addressing Vulnerabilities QER Public Meeting in Washington, DC: Enhancing Energy Infrastructure Resiliency and...

  1. Disability and Suicidal Ideation in Older Prisoners: A Pilot Study Lisa C. Barry, PhD, MPH1; Robert L. Trestman, PhD, MD2; Yeates Conwell, MD3

    E-Print Network [OSTI]

    Oliver, Douglas L.

    disability in prison-ADLs (PADLs), such as climbing on and off the top bunk and walking to the dining hallDisability and Suicidal Ideation in Older Prisoners: A Pilot Study Lisa C. Barry, PhD, MPH1; Robert for current suicidal ideation (SI), emphasizing deficits in functional abilities specific to the prison

  2. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    mainly fluorescent and LED lighting and DC ceiling fans. TheFluorescent, CFL Lighting systems: LED Fluorescent and CFLlamps CFL lamps LED lamp CFL floodlight Lighting systems:

  3. Simultaneous distribution of AC and DC power

    DOE Patents [OSTI]

    Polese, Luigi Gentile

    2015-09-15

    A system and method for the transport and distribution of both AC (alternating current) power and DC (direct current) power over wiring infrastructure normally used for distributing AC power only, for example, residential and/or commercial buildings' electrical wires is disclosed and taught. The system and method permits the combining of AC and DC power sources and the simultaneous distribution of the resulting power over the same wiring. At the utilization site a complementary device permits the separation of the DC power from the AC power and their reconstruction, for use in conventional AC-only and DC-only devices.

  4. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    sited renewable energy market for the foreseeable future. Inup renewable energy systems increases in the future, chargerenewable energy sources [5]. If direct-DC has a future in

  5. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    similarly to an uninterruptible power supply. Lifetime:utility coupled with uninterruptible power requirements forloads serviced by DC uninterruptible power supplies in data

  6. SSL Demonstration: Parking Garage Lighting, Washington, DC

    SciTech Connect (OSTI)

    2013-06-01

    GATEWAY program report brief summarizing an SSL parking garage demonstration at the Dept. of Labor headquarters parking garage in Washington, DC.

  7. Reliability Assessment of Fault-Tolerant Dc-Dc Converters for Photovoltaic Applications

    E-Print Network [OSTI]

    Liberzon, Daniel

    Reliability Assessment of Fault-Tolerant Dc-Dc Converters for Photovoltaic Applications Sairaj V in photovoltaic energy processing applications is presented. The proposed approach acknowledges the influence through several case studies. Index Terms-- Markov reliability modeling, photovoltaic systems, power

  8. Design of a very high frequency resonant boost DC-DC converter

    E-Print Network [OSTI]

    Burkhart, Justin (Justin Michael)

    2010-01-01

    THIS thesis explores the development of a very high frequency DC-DC resonant boost converter. The topology examined features low parts count and fast transient response but suffers from higher device stresses compared to ...

  9. Design and evaluation of a very high frequency dc/dc converter

    E-Print Network [OSTI]

    Pilawa-Podgurski, Robert C. N

    2007-01-01

    This thesis presents a resonant boost topology suitable for very high frequency (VHF, 30-300 MHz) dc-dc power conversion. The proposed design is a fixed frequency, fixed duty ratio resonant converter featuring low device ...

  10. Design and characterization of a radio-frequency dc/dc power converter

    E-Print Network [OSTI]

    Jackson, David A. (David Alexander)

    2005-01-01

    The use of radio-frequency (RF) amplifier topologies in dc/dc power converters allows the operating frequency to be increased by more than two orders of magnitude over the frequency of conventional converters. This enables ...

  11. Radio frequency dc-dc converters : device characterization, topology evaluation, and design

    E-Print Network [OSTI]

    Leitermann, Olivia

    2008-01-01

    High frequency power conversion is attractive for the opportunities it affords for improved performance. Dc-dc converters operating at high frequencies use smaller-valued energy storage elements, which tend to be physically ...

  12. Design and analysis of multiphase DC-DC converters with coupled inductors 

    E-Print Network [OSTI]

    Shi, Meng

    2007-09-17

    , directly coupled inductors have the benefit of low sensitivity to input variation at high frequencies. In addition, the proposed new structure for multiphase DC-DC converters has excellent current sharing performance and reduced current ripple. Computer...

  13. Computer-aided optimization of DC/DC converters for automotive applications

    E-Print Network [OSTI]

    Neugebauer, Timothy C.

    This paper investigates computer-aided optimization of DC/DC converters, with a focus on converters for dual-voltage automotive electrical systems. A new CAD optimization approach based on Monte Carlo search methods is ...

  14. The capacitively coupled converter (C³) for high power DC-DC conversion 

    E-Print Network [OSTI]

    Khan, Shahriar

    1992-01-01

    THE CAPACITIVELY COUPLED CONVERTER (C3) FOR HIGH POWER DC-DC CONVERSION A Thesis by SHAHRIAR KHAN Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE May 1992 Major Subject: Electrical Engineering THE CAPACITIVELY COUPLED CONVERTER (Cs) FOR HIGH POWER DC-DC CONVERSION A Thesis by SHAHRIAR KHAN Approved as to style and content by: Mehrdad Ehsani (Chair of Committee) Prasad Enjeti...

  15. High Speed CMOS Output Stage for Integrated DC-DC Converters Wai Tung Ng*, Marian Changl

    E-Print Network [OSTI]

    Ng, Wai Tung

    to attain maximum channel width per unit area for low on-resistance. A typical MF layout and its equivalent DC/DC converters is characterized by power conversion efficiency, transient response, size and cost is introduced to enhance the switching speed and power conversion efficiency of low voltage integrated DC

  16. Design and development of a DC-DC converter for a fuel cell inverter system 

    E-Print Network [OSTI]

    Gopinath, Rajesh

    2001-01-01

    (FEC)' organized by the Department of Energy and IEEE in August 2001. An efficient 3-terminal DC-DC push-pull topology was adopted to meet the performance and stringent cost constraints. A broad overview of the DC-AC inverter and its control is also...

  17. High Voltage DC Transmission 2 1.0 Introduction

    E-Print Network [OSTI]

    McCalley, James D.

    1 High Voltage DC Transmission 2 1.0 Introduction Interconnecting HVDC within an AC system requires conversion from AC to DC and inversion from DC to AC. We refer to the circuits which provide conversion from AC to DC as rectifiers and the circuits which provide conversion from DC to AC as inverters. The term

  18. High voltage DC power supply

    DOE Patents [OSTI]

    Droege, Thomas F. (Batavia, IL)

    1989-01-01

    A high voltage DC power supply having a first series resistor at the output for limiting current in the event of a short-circuited output, a second series resistor for sensing the magnitude of output current, and a voltage divider circuit for providing a source of feedback voltage for use in voltage regulation is disclosed. The voltage divider circuit is coupled to the second series resistor so as to compensate the feedback voltage for a voltage drop across the first series resistor. The power supply also includes a pulse-width modulated control circuit, having dual clock signals, which is responsive to both the feedback voltage and a command voltage, and also includes voltage and current measuring circuits responsive to the feedback voltage and the voltage developed across the second series resistor respectively.

  19. High voltage DC power supply

    DOE Patents [OSTI]

    Droege, T.F.

    1989-12-19

    A high voltage DC power supply having a first series resistor at the output for limiting current in the event of a short-circuited output, a second series resistor for sensing the magnitude of output current, and a voltage divider circuit for providing a source of feedback voltage for use in voltage regulation is disclosed. The voltage divider circuit is coupled to the second series resistor so as to compensate the feedback voltage for a voltage drop across the first series resistor. The power supply also includes a pulse-width modulated control circuit, having dual clock signals, which is responsive to both the feedback voltage and a command voltage, and also includes voltage and current measuring circuits responsive to the feedback voltage and the voltage developed across the second series resistor respectively. 7 figs.

  20. DC-based magnetic field controller

    DOE Patents [OSTI]

    Kotter, Dale K. (Shelley, ID); Rankin, Richard A. (Ammon, ID); Morgan, John P,. (Idaho Falls, ID)

    1994-01-01

    A magnetic field controller for laboratory devices and in particular to dc operated magnetic field controllers for mass spectrometers, comprising a dc power supply in combination with improvements to a hall probe subsystem, display subsystem, preamplifier, field control subsystem, and an output stage.

  1. Alcohol Outlets and Violent Crime in Washington D.C.

    E-Print Network [OSTI]

    Franklin, F. Abron; LaVeist, Thomas A.; Webster, Daniel W.; Pan, William K.

    2010-01-01

    of Violence and Disorder. Washington, D.C. : The Urbanand Violent Crime in Washington D.C. F. Abron Franklin II,Involvement in Crime. Washington, D.C. : U.S. Department of

  2. EA-351 DC Energy Dakota, LLC | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dakota, LLC Order authorizing DC Energy Dakota, LLC to export electric energy to Canada EA-351 DC Energy Dakota, LLC More Documents & Publications Application to Export...

  3. INL Efficiency and Security Testing of EVSE, DC Fast Chargers...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Security Testing of EVSE, DC Fast Chargers, and Wireless Charging Systems INL Efficiency and Security Testing of EVSE, DC Fast Chargers, and Wireless Charging Systems...

  4. Report Now Available: DC Microgrids Scoping Study--Estimate of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Report Now Available: DC Microgrids Scoping Study--Estimate of Technical and Economic Benefits (March 2015) Report Now Available: DC Microgrids Scoping Study--Estimate of Technical...

  5. Energy Department Completes Cool Roof Installation on DC Headquarters...

    Energy Savers [EERE]

    Energy Department Completes Cool Roof Installation on DC Headquarters Building to Save Money by Saving Energy Energy Department Completes Cool Roof Installation on DC Headquarters...

  6. AVTA: Battery Testing - DC Fast Charging's Effects on PEV Batteries...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Battery Testing - DC Fast Charging's Effects on PEV Batteries AVTA: Battery Testing - DC Fast Charging's Effects on PEV Batteries The Vehicle Technologies Office's Advanced Vehicle...

  7. AVTA: Hasdec DC Fast Charging Testing Results | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hasdec DC Fast Charging Testing Results AVTA: Hasdec DC Fast Charging Testing Results The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a...

  8. Low Cost, High Temperature, High Ripple Current DC Bus Capacitors...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low Cost, High Temperature, High Ripple Current DC Bus Capacitors Low Cost, High Temperature, High Ripple Current DC Bus Capacitors 2010 DOE Vehicle Technologies and Hydrogen...

  9. NOISE AND OPTIMIZATION OF THE dc SQUID

    E-Print Network [OSTI]

    Tesche, Claudia Denke

    2011-01-01

    unpublished). A. Van der Ziel, Noise (Prentice-Hall, Inc. ,MAY 29 19ft LBL-8510 MASTER NOISE AND OPTIMIZATION OF THE deW-7405-ENG-48 LBL-8510 NOISE AND OPTIMIZATION OF THE dc

  10. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    DC/AC-Hybrid) LED AC LED Power (W) Figure 8. Efficacywith the same power consumption. For LEDs, the improvementLED light-emitting diode viii lumen a measure of the power

  11. DC High School Science Bowl Regionals

    Broader source: Energy.gov [DOE]

    This event is the Washington, D.C. High School Regional competition for the US National Science Bowl. The regional competition is run by the Office of Economic Impact and Diversity, and the...

  12. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    direct-DC. The timing of EV charging relative to PV outputadded a hypothetical EV charging load. The EV load could bewith building loads. EV charging standards [26, 27

  13. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    Ovens Electric Heat Pumps Geothermal Heat Pumps Solar WaterOvens Appliance DC-internal product power (Watts) Personal Computers and Related Equipment Rechargeable Electronics Refrigerators Room Air Conditioners Security Systems Solar

  14. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    produce a DC-compatible dishwasher that uses 51% less energyCooking Equipments Dishwashers Lighting Electric Other Waterby end-Use ( TWh) Dishwashers DVDs/VCRs DVDs/VCRs Freezers

  15. American Institute of Aeronautics and Astronautics Active System Identification of a DC-DC Converter Using

    E-Print Network [OSTI]

    American Institute of Aeronautics and Astronautics 1 Active System Identification of a DC and Computer Engineering, UCB 425. #12;American Institute of Aeronautics and Astronautics 2 analysis10

  16. Improved DC Gun Insulator Assembly

    SciTech Connect (OSTI)

    Sah, R.; Dudas, A.; Neubauer, M. L.; Poelker, M.; Surles-Law, K. E.L.

    2010-05-23

    Many user fa­cil­i­ties such as syn­chrotron ra­di­a­tion light sources and free elec­tron lasers re­quire ac­cel­er­at­ing struc­tures that sup­port elec­tric fields of 10-100 MV/m, es­pe­cial­ly at the start of the ac­cel­er­a­tor chain where ce­ram­ic in­su­la­tors are used for very high gra­di­ent DC guns. These in­su­la­tors are dif­fi­cult to man­u­fac­ture, re­quire long com­mis­sion­ing times, and often ex­hib­it poor re­li­a­bil­i­ty. Two tech­ni­cal ap­proach­es to solv­ing this prob­lem will be in­ves­ti­gat­ed. First­ly, in­vert­ed ce­ram­ics offer so­lu­tions for re­duced gra­di­ents be­tween the elec­trodes and ground. An in­vert­ed de­sign will be pre­sent­ed for 350 kV, with max­i­mum gra­di­ents in the range of 5-10 MV/m. Sec­ond­ly, novel ce­ram­ic man­u­fac­tur­ing pro­cess­es will be stud­ied, in order to pro­tect triple junc­tion lo­ca­tions from emis­sion, by ap­ply­ing a coat­ing with a bulk re­sis­tiv­i­ty. The pro­cess­es for cre­at­ing this coat­ing will be op­ti­mized to pro­vide pro­tec­tion as well as be used to coat a ce­ram­ic with an ap­pro­pri­ate gra­di­ent in bulk re­sis­tiv­i­ty from the vac­u­um side to the air side of an HV stand­off ce­ram­ic cylin­der. Ex­am­ple in­su­la­tor de­signs are being com­put­er mod­elled, and in­su­la­tor sam­ples are being man­u­fac­tured and test­ed

  17. A DC-DC Converter-Based PEM Fuel Cell System Emulator

    E-Print Network [OSTI]

    Boyer, Edmond

    A DC-DC Converter-Based PEM Fuel Cell System Emulator Daoud Rezzak, Farid Khoucha, Mohamed Benbouzid, Abdelaziz Kheloui and Abdeslam Mamoune Abstract--The Proton Exchange Membrane Fuel Cell (PEMFC power supplies. Fuel cell systems are characterized by high costs and complex auxiliary devices

  18. DC's Marble ceiling : urban height and its regulation in Washington, DC

    E-Print Network [OSTI]

    Trueblood, Andrew Tyson

    2009-01-01

    Washington, DC has a unique urban form that is the result of a century-old law. Through the narrow lens of DC's height limit, I survey a range of topics related to urban height, starting with a review of its history of ...

  19. Method to Improve Total Dose Radiation Hardness in a CMOS dc-dc Boost

    E-Print Network [OSTI]

    Wilamowski, Bogdan Maciej

    Method to Improve Total Dose Radiation Hardness in a CMOS dc-dc Boost Converter Huadian Pan in a wide range of radiation environment, with increasing total dose radiation, The efticieney also greatly for low-power applications (1],[2]. It is known that radiation has many effects on MOSFETs

  20. Development of a 55 kW 3X DC-DC Converter for HEV Systems

    E-Print Network [OSTI]

    Tolbert, Leon M.

    efficiency provide the great potential for the very high temperature operation. The circuit parameter design converter and a traction motor to drive the vehicle. In most commercial HEV systems, the power converter, 37996 Abstract--The design of a 55 kW 3X dc-dc converter is presented for hybrid electric vehicle (HEV

  1. Time domain design of digital compensators for PWM DC-DC converters

    E-Print Network [OSTI]

    transformation and discretization. Digital PID controllers for a Buck and Boost type converters were implemented (via the various transformation algorithms), a digital compensator operates, in reality, in the sampledTime domain design of digital compensators for PWM DC-DC converters Mor Mordechai Peretz and Sam

  2. 5 kW Multilevel DC-DC Converter for Hybrid Electric and Fuel Cell Automotive

    E-Print Network [OSTI]

    Tolbert, Leon M.

    5 kW Multilevel DC-DC Converter for Hybrid Electric and Fuel Cell Automotive Applications Faisal H) for future hybrid electric vehicle and fuel cell automotive applications will be presented in this paper will impact if the 42V/14V dual bus system will be a successful and cost effective solution for future

  3. Aalborg Universitet Optimization with System Damping Restoration for Droop Controlled DC-DC

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    --The parallel operation of dc-dc converters is widely used in distribution systems and uninterruptable power supply systems. Droop control along with virtual resistance (VR) is considered a simple and reliable method for achieving wireless power sharing among converters. In order to enhance the efficiency

  4. DC WRRC Report No. 44 THE D.C. WATER RESOURCES RESEARCH CENTER

    E-Print Network [OSTI]

    District of Columbia, University of the

    . The agreements will reduce the possibility of water shortages during low flows or pollution crisis and insure for new expanded treatment facilities. Finally, the recently completed Rock Creek water shed study has#12;DC WRRC Report No. 44 THE D.C. WATER RESOURCES RESEARCH CENTER THE UNIVERSITY OF THE DISTRICT

  5. Homopolar dc motor and trapped flux brushless dc motor using high temperature superconductor materials

    SciTech Connect (OSTI)

    Crapo, A.D.; Lloyd, J.D. (Emerson Electric Co., St. Louis, MO (US))

    1991-03-01

    This paper reports on two motors designed and built for use with high temperature superconductor (HTSC) materials. They are a homopolar DC motor that will use HTSC field windings and a brushless DC motor that will use bulk HTSC material to trap flux in steel rotor poles. The HTSC field windings of the homopolar DC motor are designed to operate at 1000 Amperes/cm{sup 2} in a 0.010 Tesla (100 Gauss) field. In order to maximize torque in the homopolar DC motor, an iron magnetic circuit with small air gaps gives maximum flux for minimum Ampere turns in the field. A copper field winding version of the homopolar DC motor has been tested while the authors wait for 575 Ampere turn HTSC coils.

  6. mph_hpca_revise.dvi

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th AnnualHistoryMIII: TheJointCoupling Multi-Component Models

  7. An Exploration of the Perceptions and Utilizations of Networking Systems in Washington, D.C.

    E-Print Network [OSTI]

    Lindsey, Robynne

    2013-01-01

    Personal Interview. Washington, D.C. , July 25, 2013.Personal Interview. Washington, D.C. , August 12, 2013.Personal Interview. Washington, D.C. , July 17, 2013. 12

  8. FEDERAL COMMUNICATIONS COMMISSION Washington, DC 20554

    E-Print Network [OSTI]

    Bove Jr., V. Michael

    FCC 96­207 Before the FEDERAL COMMUNICATIONS COMMISSION Washington, DC 20554 In the Matter of a mechanism for a bit stream layer transmission standard (into which, e.g., MPEG­2 could fit) 3) The FCC: number of hours per day of digital television transmission, minimal Quality of Service specifications

  9. Halbach array DC motor/generator

    DOE Patents [OSTI]

    Merritt, Bernard T. (Livermore, CA); Dreifuerst, Gary R. (Livermore, CA); Post, Richard F. (Walnut Creek, CA)

    1998-01-01

    A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An "inside-out" design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then "switched" or "commutated" to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives.

  10. Halbach array DC motor/generator

    DOE Patents [OSTI]

    Merritt, B.T.; Dreifuerst, G.R.; Post, R.F.

    1998-01-06

    A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An ``inside-out`` design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then ``switched`` or ``commutated`` to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives. 17 figs.

  11. SUBCONTRACT REPORT: DC-DC Converter for Fuel Cell and Hybrid Vehicles

    SciTech Connect (OSTI)

    Marlino, Laura D; Zhu, Lizhi

    2007-07-01

    The goal of this project is to develop and fabricate a 5kW dc-dc converter with a baseline 14V output capability for fuel cell and hybrid vehicles. The major objectives for this dc-dc converter technology are to meet: Higher efficiency (92%); High coolant temperature,e capability (105 C); High reliability (15 Years/150,000miles); Smaller volume (5L); Lower weight (6kg); and Lower cost ($75/kW). The key technical challenge for these converters is the 105 C coolant temperatures. The power switches and magnetics must be designed to sustain these operating temperatures reliably, without a large cost/mass/volume penalty.

  12. D.C. Water Resources Research Center Annual Technical Report

    E-Print Network [OSTI]

    - DC Water and Sewer Authority (WASA) The Institutes received favorable responses from and met with the following new Advisory Board members: 1- Mr. Richard Gianni, Water Quality Manager, DC Water and Sewer

  13. Decoherence and dephasing errors caused by the dc Stark effect...

    Office of Scientific and Technical Information (OSTI)

    Decoherence and dephasing errors caused by the dc Stark effect in rapid ion transport Citation Details In-Document Search Title: Decoherence and dephasing errors caused by the dc...

  14. DC Microgrids Scoping Study: Estimate of Technical and Economic...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    applications where the end-use loads are natively DC, e.g., computers, solid-state lighting, and building networks. These early DC applications may provide higher efficiency,...

  15. Persons Who Received the DC PSC's Emergency Petition and Complaint...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Persons Who Received the DC PSC's Emergency Petition and Complaint via E-mail on August 24, 2005 Persons Who Received the DC PSC's Emergency Petition and Complaint via E-mail on...

  16. Aalborg Universitet Hierarchical Control for Multiple DC-Microgrids Clusters

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    , and energy storages (e.g., secondary battery and super capacitor) [7]­[15]. Normally, dc MGs are proposed

  17. Energy Training Session for DC Elementary School Teachers

    Broader source: Energy.gov [DOE]

    Are you an elementary school teacher in Washington, DC, looking for creative ideas to introduce energy curriculum to your students?

  18. Exploring the Raft River geothermal area, Idaho, with the dc...

    Open Energy Info (EERE)

    the dc resistivity method (Abstract) Abstract GEOTHERMAL ENERGY; GEOTHERMAL FIELDS; ELECTRICAL SURVEYS; IDAHO; GEOTHERMAL EXPLORATION; RAFT RIVER VALLEY; ELECTRIC CONDUCTIVITY;...

  19. Urbanisation de DC ANF Datacentres 2 Octobre 2014

    E-Print Network [OSTI]

    van Tiggelen, Bart

    Urbanisation de DC ANF Datacentres ­ 2 Octobre 2014 Cargese Urbanisation des Datacentres Romaric David david@unistra.fr Univerité de Strasbourg 2 Octobre 2014 #12;2 Urbanisation de DC ANF Datacentres constructeurs Conclusion #12;3 Urbanisation de DC ANF Datacentres ­ 2 Octobre 2014 Cargese Introduction Centre

  20. D.C. Water Resources Research Center Annual Technical Report

    E-Print Network [OSTI]

    D.C. Water Resources Research Center Annual Technical Report FY 2007 D.C. Water Resources Research of the District of Columbia (DC) Water Resources Research Institute (the Institute) for the period of March 1 relevant water resources research results and transfer information to assist policy makers and residents

  1. Aalborg Universitet Hierarchical Control for Multiple DC Microgrids Clusters

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    Aalborg Universitet Hierarchical Control for Multiple DC Microgrids Clusters Shafiee, Qobad). Hierarchical Control for Multiple DC Microgrids Clusters. I E E E Transactions on Energy Conversion, 29(4), 922. Dragicevic, J. C. Vasquez, and J. M. Guerrero, "Hierarchical Control for Multiple DC-Microgrids Clusters

  2. RF MEMS DC CONTACT SWTCHES FOR RECONFIGURABLE Presented to the

    E-Print Network [OSTI]

    Kassegne, Samuel Kinde

    RF MEMS DC CONTACT SWTCHES FOR RECONFIGURABLE ANTENNAS _______________ A Thesis Presented STATE UNIVERSITY The Undersigned Faculty Committee Approves the Thesis of Lei Zhou: RF DC Contact MEMS rock and water, water, through persistence, eventually wins. #12;vi ABSTRACT OF THE THESIS RF MEMS DC

  3. Q&A: Kristen Psaki of WeatherizeDC

    Broader source: Energy.gov [DOE]

    Roughly 20 percent of carbon emissions come from inefficient homes. The DC Project says it has found a way to mitigate emissions and create jobs, a winning combination. WeatherizeDC is the non-profit’s effort to use a community engagement model to help DC residents find green jobs and live a more energy efficient lifestyle.

  4. Energy Challenge Two: The WeatherizeDC Campaign

    Broader source: Energy.gov [DOE]

    WeatherizeDC is a campaign of The DC Project, a nonprofit based in Washington, D.C., founded by former leaders of the Obama for America campaign around a mission to advance economic and environmental justice by creating clean energy career opportunities for people who need them most.

  5. A single-inductor switching DC-DC converter with five outputs and ordered power-distributive control

    E-Print Network [OSTI]

    Le, Hanh-Phuc; Chae, Chang-Seok; Lee, Kwang-Chan; Wang, Se-Won; Cho, Gyu-Ha; Cho, Gyu-Hyeong

    2007-01-01

    integrated current mode boost converter in standard 3.3=5-Vef?ciency CMOS DC-DC boost converter with current sensingdeveloping reset ICs, boost converters for PM OLED, and SIMO

  6. Low Power DC-DC Converters and a Low Quiescent Power High PSRR Class-D Audio Amplifier 

    E-Print Network [OSTI]

    Torres, Joselyn

    2013-12-03

    High-performance DC-DC voltage converters and high-efficient class-D audio amplifiers are required to extend battery life and reduce cost in portable electronics. This dissertation focuses on new system architectures and design techniques...

  7. Design of a step-down DC-DC controller integrated circuit with adaptive dead-time control

    E-Print Network [OSTI]

    Li, Zhipeng, M. Eng. Massachusetts Institute of Technology

    2010-01-01

    A constant-frequency peak current mode synchronous step-down DC-DC controller integrated circuit has been designed with adaptive dead-time control. The adaptive dead-time control circuitry is implemented as digital ...

  8. Property:AvgAnnlGrossOpCpcty | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland:NPIProtectio1975)Energy Technology JumpWilliamDRAFTArea Jump to:

  9. Property:IndustrialAvgRate | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo,AltFuelVehicle2 Jump to: navigation, searchContDiv JumpTechDsc Jump to:cons Jump

  10. AVG Koeln GmbH | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EAand Dalton JumpProgramInformationEnergyAG Jump to:ATAVG Koeln GmbH

  11. Property:AvgWellDepth | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceII JumpQuarterly SmartDB-2,Information

  12. Property:CommercialAvgRate | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceIIInformationEnergyReportNumber Jump to:

  13. Computer-Aided Optimization of dc/dc Converters for Automotive Applications Timothy C. Neugebauer David J. Perreault

    E-Print Network [OSTI]

    Perreault, Dave

    Computer-Aided Optimization of dc/dc Converters for Automotive Applications Timothy C. Neugebauer/dc converters, with a focus on converters for dual-voltage automotive electrical systems. A new CAD optimization is the next evolutionary step for automotive electrical systems. High-power loads will be moved to a new high

  14. Improved DC Gun and Insulator Assembly

    SciTech Connect (OSTI)

    Neubauer, Michael; Johnson, Rolland P

    2015-01-11

    Many user facilities such as synchrotron radiation light sources and free electron lasers rely on DC high voltage photoguns with internal field gradients as high as 10 to 15 MV/m. These high gradients often lead to field emission which poses serious problems for the photocathode used to generate the electron beam and the ceramic insulators used to bias the photocathode at high voltage. Ceramic insulators are difficult to manufacture, require long commissioning times, and have poor reliability, in part because energetic electrons bury themselves in the ceramic causing a buildup of charge and eventual puncture, and also because large diameter ceramics are difficult to braze reliably. The lifetimes of photo cathodes inside high current DC guns exhibiting field emission are limited to less than a hundred hours. Reducing the surface gradients on the metals reduces the field emission, which serves to maintain the required ultrahigh vacuum condition. A novel gun design with gradients around 5 MV/m and operating at 350 kV, a major improvement over existing designs, was proposed that allows for the in-situ replacement of photo cathodes in axially symmetric designs using inverted ceramics. In this project, the existing JLAB CEBAF asymmetric gun design with an inverted ceramic support was modeled and the beam dynamics characterized. An improved structure was designed that reduces the surface gradients and improves the beam optics. To minimize the surface gradients, a number of electrostatic gun designs were studied to determine the optimum configuration of the critical electrodes within the gun structure. Coating experiments were carried out to create a charge dissipative coating for cylindrical ceramics. The phase II proposal, which was not granted, included the design and fabrication of an axially symmetric DC Gun with an inverted ceramic that would operate with less than 5 MV/m at 350 kV and would be designed with an in-situ replaceable photo-cathode.

  15. Quantitative Outgassing studies in DC Electrical breakdown

    E-Print Network [OSTI]

    Levinsen, Yngve Inntjore; Calatroni, Sergio; Taborelli, Mauro; Wünsch, Walter

    2010-01-01

    Breakdown in the accelerating structures sets an important limit to the performance of the CLIC linear collider. Vacuum degradation and subsequent beam instability are possible outcomes of a breakdown if too much gas is released from the cavity surface. Quantitative data of gas released by breakdowns are provided for copper (milled Cu-OFE, as-received and heat-treated), and molybdenum. These data are produced in a DC spark system based on a capacitance charged at fixed energy, and will serve as a reference for the vacuum design of the CLIC accelerating structures.

  16. Dc's blog | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (UtilityInstruments Inc JumpIowa:Minnesota:Daylighting JumpDc's blog Home >

  17. DC Survey 2013 | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE-SessionsSouthReport for the t-) S/,,5 'a CConversion |National Laser UserDC

  18. Washington DC | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop IncIowa (Utility Company)Idaho)Vossloh Kiepe JumpWarana Group ofDC Home Linked

  19. A Reachability-Based Method for Large-Signal Behavior Verification of DC-DC Converters

    E-Print Network [OSTI]

    Liberzon, Daniel

    -loop, large-signal system behavior verification, and iv) switching detail modeling. In open-loop, large´inguez-Garc´ia, Member, IEEE Abstract--A method for large-signal behavior verification of power electronics DC behavior verification, lengthy time-domain simula- tions are conducted to analyze the system response

  20. Vehicle Technologies Office Merit Review 2014: DC Fast Charging...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technologies Office Merit Review 2014: DC Fast Charging Effects on Battery Life and EVSE Efficiency and Security Testing Presentation given by Idaho National Laboratory at 2014...

  1. INL Efficiency and Security Testing of EVSE, DC Fast Chargers...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    INL Efficiency and Security Testing of EVSE, DC Fast Chargers, and Wireless Charging Systems May 14, 2013 Project ID VSS096 2013 DOE Vehicle Technologies Program Annual Merit...

  2. Washington DC Reliability Requirements and the Need to Operate...

    Energy Savers [EERE]

    DC Reliability Requirements and the Need to Operate Mirant's Potomac River Generation Station to Support Local Area Reliability (Oak Ridge National Laboratory 2005)...

  3. DC Resistivity Survey (Schlumberger Array) At Raft River Geothermal...

    Open Energy Info (EERE)

    Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: DC Resistivity Survey (Schlumberger Array) At Raft River Geothermal Area (1974-1975) Exploration...

  4. INL Efficiency and Security Testing of EVSE, DC Fast Chargers...

    Broader source: Energy.gov (indexed) [DOE]

    Testing to support Code & Standards Vehicle Technologies Office Merit Review 2014: DC Fast Charging Effects on Battery Life and EVSE Efficiency and Security Testing Vehicle...

  5. DC Bus Capacitor Manufacturing Facility for Electric Drive Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C. apearravt028boan2010...

  6. DC Resistivity Survey (Wenner Array) At Mt Princeton Hot Springs...

    Open Energy Info (EERE)

    2008 - 2010 Usefulness useful DOE-funding Unknown Exploration Basis Determination of groundwater flux patterns Notes Researchers measured DC resistivity and produced 12 resistivity...

  7. DESIGN AND PERFORMANCE OF PEP DC POWER SYSTEMS

    E-Print Network [OSTI]

    Jackson, T.

    2010-01-01

    DC supplies, with no switchgear interposed between the DCthe only transformers and switchgear in the system, and theycost of transformers and switchgear is eliminated from the

  8. Design and analysis of a zero-voltage switching scheme for a dc- to-dc converter 

    E-Print Network [OSTI]

    Arun, G.

    1992-01-01

    DESIGN AND ANALYSIS OF A ZERO-VOLTAGE SSVITCHING SCFIE'. tIE FOR A DC-TO-DC CONVERTER A Thesis by G. ARUN Submitted to the Office of Graduate Studies of Texas ARM 1. niversity in partial fulfillment of the requirements for the degree... of MASTER OF SCIENCE December 1992 Major Subject: Electrical Engineering DESIGN AND ANALYSIS OE A ZERO-VOLTAGE SWITCHING SCHEME I'OR A DC-TO-DC CONVERTER A Thesis by G. AR(tN Approved as to style and content by: P. Enjeti (Chair of Cornrnitteel C...

  9. High Voltage DC Transmission 1.0 Introduction

    E-Print Network [OSTI]

    McCalley, James D.

    1 High Voltage DC Transmission 1.0 Introduction HVDC has been applied in electric power systems Supplier: ABB Railroa d DC Tie USA - Mission, TX 26°1001N9 8°1925W USA - Mission, TX 26°1001N9 8°1925W 21

  10. DC Optimal Power Flow: Uniqueness and Chee Wei Tan

    E-Print Network [OSTI]

    Tan, Chee Wei

    the minimization of power transmission loss in DC-OPF and char- acterize the uniqueness of its solutions. This hasDC Optimal Power Flow: Uniqueness and Algorithms Chee Wei TanÝ , Desmond W. H. Cai£ and Xin LouÝ Ý and transmission loss in a power net- work subject to physical constraints governed by Kirchhoff's and Ohm's law [1

  11. A 3D Magnetic Force Manipulator DC Prototype

    E-Print Network [OSTI]

    North Carolina at Chapel Hill, University of

    A 3D Magnetic Force Manipulator DC Prototype Leandra Vicci Microelectronic Systems Laboratory optical field intensities which interact strongly with many materials and may produce undesired side;Leandra Vicci A 3D Magnetic Force Manipulator DC Prototype 17 October 2001 1 Conceptual design

  12. Read-out electronics for DC squid magnetic measurements

    DOE Patents [OSTI]

    Ganther, Jr., Kenneth R. (Olathe, KS); Snapp, Lowell D. (Independence, MO)

    2002-01-01

    Read-out electronics for DC SQUID sensor systems, the read-out electronics incorporating low Johnson noise radio-frequency flux-locked loop circuitry and digital signal processing algorithms in order to improve upon the prior art by a factor of at least ten, thereby alleviating problems caused by magnetic interference when operating DC SQUID sensor systems in magnetically unshielded environments.

  13. Peter M. Vallone AAFS Washington, D.C.

    E-Print Network [OSTI]

    Peter M. Vallone AAFS Washington, D.C. February 23, 2008 http://www.cstl.nist.gov/biotech available for the purpose. Our publications and presentations are made available at: http://www.cstl.nist.gov/biotech/strbase/NISTpub.htm #12;Peter M. Vallone AAFS Washington, D.C. February 23, 2008 http://www.cstl.nist.gov/biotech

  14. Tutorial, GECCO'05, Washington D.C. Fitness Approximation

    E-Print Network [OSTI]

    Yang, Shengxiang

    1 Tutorial, GECCO'05, Washington D.C. Fitness Approximation in Evolutionary Computation Yaochu Jin Honda Research Institute Europe Khaled Rasheed University of Georgia Tutorial, GECCO'05, Washington D expensive fitness evaluations Tutorial, GECCO'05, Washington D.C. Fitness Approximation Methods · Problem

  15. National Small Business Federal Contracting Summit-DC Fall Conference

    Broader source: Energy.gov [DOE]

    The 2014 National Small Business Federal Contracting Summit - DC Fall Conference is presented jointly by the National Association of Small Business Contractors (the Supplier Council of The American Small Business Chamber of Commerce) and the U.S. Women's Chamber of Commerce in Washington DC.

  16. Dynamic microscopic theory of fusion using DC-TDHF

    SciTech Connect (OSTI)

    Umar, A. S.; Oberacker, V. E.; Keser, R.; Maruhn, J. A.; Reinhard, P.-G.

    2012-10-20

    The density-constrained time-dependent Hartree-Fock (DC-TDHF) theory is a fully microscopic approach for calculating heavy-ion interaction potentials and fusion cross sections below and above the fusion barrier. We discuss recent applications of DC-TDHF method to fusion of light and heavy systems.

  17. Historical Material Analysis of DC745U Pressure Pads

    SciTech Connect (OSTI)

    Ortiz-Acosta, Denisse [Los Alamos National Laboratory

    2012-07-30

    As part of the Enhance Surveillance mission, it is the goal to provide suitable lifetime assessment of stockpile materials. This report is an accumulation of historical publication on the DC745U material and their findings. It is the intention that the B61 LEP program uses this collection of data to further develop their understanding and potential areas of study. DC745U is a commercially available silicone elastomer consisting of dimethyl, methyl-phenyl, and methyl-vinyl siloxane repeat units. Originally, this material was manufactured by Dow Corning as Silastic{reg_sign} DC745U at their manufacturing facility in Kendallville, IN. Recently, Dow Corning shifted this material to the Xiameter{reg_sign} brand product line. Currently, DC745U is available through Xiameter{reg_sign} or Dow Corning's distributor R. D. Abbott Company. DC745U is cured using 0.5 wt% vinyl-specific peroxide curing agent known as Luperox 101 or Varox DBPH-50. This silicone elastomer is used in numerous parts, including two major components (outer pressure pads and aft cap support) in the W80 and as pressure pads on the B61. DC745U is a proprietary formulation, thus Dow Corning provides limited information on its composition and properties. Based on past experience with Dow Corning, DC745U is at risk of formulation changes without notification to the costumer. A formulation change for DC745U may have a significant impact because the network structure is a key variable in determining material properties. The purpose of this report is to provide an overview of historical DC745U studies and identify gaps that need to be addressed in future work. Some of the previous studies include the following: 1. Spectroscopic characterization of raw gum stock. 2. Spectroscopic, thermal, and mechanical studies on cured DC745U. 3. Nuclear Magnetic Resonance (NMR) and solvent swelling studies on DC745U with different crosslink densities. 4. NMR, solvent swelling, thermal, and mechanical studies on thermally aged DC745U. 5. NMR, solvent swelling, thermal, and mechanical studies on radiolytically aged DC745U. Each area is reviewed and further work is suggested to improve our understanding of DC745U for systems engineering, surveillance, aging assessments, and lifetime assessment.

  18. 1668 IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 27, NO. 4, APRIL 2012 55-kW Variable 3X DC-DC Converter for Plug-in

    E-Print Network [OSTI]

    Tolbert, Leon M.

    vehicle (HEV) traction drives. The boost converter used in commercial HEVs meets with obstacles when is shown in Fig. 1. In this system, the dc-dc converter boosts the battery voltage from 244 V to three op series-parallel HEV. speed and power demand of the vehicle. In this traditional dc- dc boost converter

  19. New leading/trailing edge modulation strategies for two-stage AC/DC PFC adapters to reduce DC-link capacitor ripple current 

    E-Print Network [OSTI]

    Sun, Jing

    2007-09-17

    PFC stage and trailing edge modulation for the second DC/DC converter stage can significantly reduce the ripple current and ripple voltage of the DC-link capacitor. Thus, a smaller DC-link capacitance can be used, lowering the cost and size of the AC...

  20. Development of a Novel Bi-Directional Isolated Multiple-Input DC-DC Converter

    SciTech Connect (OSTI)

    Li, H.

    2005-10-24

    There is vital need for a compact, lightweight, and efficient energy-storage system that is both affordable and has an acceptable cycle life for the large-scale production of electric vehicles (EVs) and hybrid electric vehicles (HEVs). Most of the current research employs a battery-storage unit (BU) combined with a fuel cell (FC) stack in order to achieve the operating voltage-current point of maximum efficiency for the FC system. A system block diagram is shown in Fig.1.1. In such a conventional arrangement, the battery is sized to deliver the difference between the energy required by the traction drive and the energy supplied by the FC system. Energy requirements can increase depending on the drive cycle over which the vehicle is expected to operate. Peak-power transients result in an increase of losses and elevated temperatures which result in a decrease in the lifetime of the battery. This research will propose a novel two-input direct current (dc) dc to dc converter to interface an additional energy-storage element, an ultracapacitor (UC), which is shown in Fig.1.2. It will assist the battery during transients to reduce the peak-power requirements of the battery.

  1. Abstract--A design method for digital controller of PWM DC-DC converters was developed, tested by simulations and

    E-Print Network [OSTI]

    domain transformation and discretization. A digital PID controller for a Buck type converter domain and the sampled data domain (via the various transformation algorithms), a digital compensatorAbstract-- A design method for digital controller of PWM DC-DC converters was developed, tested

  2. Phase-Shifted Full Bridge DC-DC Converter with Energy Recovery Clamp and Reduced Circulating Current

    E-Print Network [OSTI]

    Phase-Shifted Full Bridge DC-DC Converter with Energy Recovery Clamp and Reduced Circulating@aei.com Abstract - This paper introduces a full bridge converter with reduced circulating current and a reduction bridge converter operating at 32 kHz switching frequency. Losses and efficiency of the experimental

  3. Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    AC vs. DC distribution: A loss comparison. Transmission andof a DC microgrid for residential houses. In Transmission &DC mainly because it enabled central generation and efficient long-distance power transmission.

  4. Application to Export Electric Energy OE Docket No. EA-351 DC...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 DC Energy Dakota, LLC Application to Export Electric Energy OE Docket No. EA-351 DC Energy Dakota, LLC Application from DC Energy Dakota, LLC to export electric energy to Canada...

  5. We Have a Winner - DC High School Regional Science Bowl Competition...

    Energy Savers [EERE]

    We Have a Winner - DC High School Regional Science Bowl Competition Held Last Saturday We Have a Winner - DC High School Regional Science Bowl Competition Held Last Saturday...

  6. Implementing the DC Mode in Cosmological Simulations with Supercomoving Variables

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Gnedin, Nickolay Y; Kravtsov, Andrey V; Rudd, Douglas H

    2011-06-02

    As emphasized by previous studies, proper treatment of the density fluctuation on the fundamental scale of a cosmological simulation volume - the 'DC mode' - is critical for accurate modeling of spatial correlations on scales ~> 10% of simulation box size. We provide further illustration of the effects of the DC mode on the abundance of halos in small boxes and show that it is straightforward to incorporate this mode in cosmological codes that use the 'supercomoving' variables. The equations governing evolution of dark matter and baryons recast with these variables are particularly simple and include the expansion factor, andmore »hence the effect of the DC mode, explicitly only in the Poisson equation.« less

  7. Thermoelectric DC conductivities and Stokes flows on black hole horizons

    E-Print Network [OSTI]

    Elliot Banks; Aristomenis Donos; Jerome P. Gauntlett

    2015-07-15

    We consider a general class of electrically charged black holes of Einstein-Maxwell-scalar theory that are holographically dual to conformal field theories at finite charge density which break translation invariance explicitly. We examine the linearised perturbations about the solutions that are associated with the thermoelectric DC conductivity. We show that there is a decoupled sector at the black hole horizon which must solve generalised Stokes equations for a charged fluid. By solving these equations we can obtain the DC conductivity of the dual field theory. For one-dimensional lattices we solve the fluid equations to obtain closed form expressions for the DC conductivity in terms of the solution at the black hole horizon. We also determine the leading order DC conductivity for lattices that can be expanded as a perturbative series about translationally invariant solutions.

  8. Radiofrequency amplifier based on a dc superconducting quantum interference device

    DOE Patents [OSTI]

    Hilbert, C.; Martinis, J.M.; Clarke, J.

    1984-04-27

    A low noise radiofrequency amplifer, using a dc SQUID (superconducting quantum interference device) as the input amplifying element. The dc SQUID and an input coil are maintained at superconductivity temperatures in a superconducting shield, with the input coil inductively coupled to the superconducting ring of the dc SQUID. A radiofrequency signal from outside the shield is applied to the input coil, and an amplified radiofrequency signal is developed across the dc SQUID ring and transmitted to exteriorly of the shield. A power gain of 19.5 +- 0.5 dB has been achieved with a noise temperature of 1.0 +- 0.4 K at a frequency of 100 MHz.

  9. National Science Bowl Brings Best and Brightest to DC

    Broader source: Energy.gov [DOE]

    The National Science Bowl Finals in Washington D.C. April 27 to 30 pit 113 high and middle school teams against one another answering questions Jeopardy-style about biology, chemistry, earth science, physics, astronomy, and math.

  10. Thermoelectric DC conductivities and Stokes flows on black hole horizons

    E-Print Network [OSTI]

    Banks, Elliot; Gauntlett, Jerome P

    2015-01-01

    We consider a general class of electrically charged black holes of Einstein-Maxwell-scalar theory that are holographically dual to conformal field theories at finite charge density which break translation invariance explicitly. We examine the linearised perturbations about the solutions that are associated with the thermoelectric DC conductivity. We show that there is a decoupled sector at the black hole horizon which must solve generalised Stokes equations for a charged fluid. By solving these equations we can obtain the DC conductivity of the dual field theory. For one-dimensional lattices we solve the fluid equations to obtain closed form expressions for the DC conductivity in terms of the solution at the black hole horizon. We also determine the leading order DC conductivity for lattices that can be expanded as a perturbative series about translationally invariant solutions.

  11. Thermoelectric DC conductivities with momentum dissipation from higher derivative gravity

    E-Print Network [OSTI]

    Long Cheng; Xian-Hui Ge; Zu-Yao Sun

    2015-04-28

    We present a mechanism of momentum relaxation in higher derivative gravity by adding linear scalar fields to the Gauss-Bonnet theory. We analytically computed all of the DC thermoelectric conductivities in this theory by adopting the method given by Donos and Gauntlett in [arXiv:1406.4742]. The results show that the DC electric conductivity is not a monotonic function of the effective impurity parameter $\\beta$: in the small $\\beta$ limit, the DC conductivity is dominated by the coherent phase, while for larger $\\beta$, pair creation contribution to the conductivity becomes dominant, signaling an incoherent phase. In addition, the DC heat conductivity is found independent of the Gauss-Bonnet coupling constant.

  12. Thermoelectric DC conductivities and Stokes flows on black hole horizons

    E-Print Network [OSTI]

    Elliot Banks; Aristomenis Donos; Jerome P. Gauntlett

    2015-10-11

    We consider a general class of electrically charged black holes of Einstein-Maxwell-scalar theory that are holographically dual to conformal field theories at finite charge density which break translation invariance explicitly. We examine the linearised perturbations about the solutions that are associated with the thermoelectric DC conductivity. We show that there is a decoupled sector at the black hole horizon which must solve generalised Stokes equations for a charged fluid. By solving these equations we can obtain the DC conductivity of the dual field theory. For Q-lattices and one-dimensional lattices we solve the fluid equations to obtain closed form expressions for the DC conductivity in terms of the solution at the black hole horizon. We also determine the leading order DC conductivity for lattices that can be expanded as a perturbative series about translationally invariant solutions.

  13. A Multiphase, Modular, Bidirectional, Triple-Voltage DC-DC Converter Power Systems

    SciTech Connect (OSTI)

    Su, Gui-Jia [ORNL; Tang, Lixin [ORNL

    2008-01-01

    Electrical power systems in future hybrid and fuel cell vehicles may employ three voltage [14 V, 42 V, and high voltage (HV)] nets. These will be necessary to accommodate existing 14-V loads as well as efficiently handle new heavy loads at the 42-V net and a traction drive on the HV bus. A low-cost DC-DC converter was proposed for connecting the three voltage nets. It minimizes the number of switches and their associated gate driver components by using two half-bridges and a high-frequency transformer. Another salient feature is that the half bridge on the 42-V bus is also utilized to provide the 14-V bus by operating at duty ratios around an atypical value of 1/3. Moreover, it makes use of the parasitic capacitance of the switches and the transformer leakage inductance for soft switching. The use of half bridges makes the topology well suited for interleaved multiphase modular configurations as a means to increase the power level because the capacitor legs can be shared. This paper presents simulation and experimental results on an interleaved two-phase arrangement rated at 4.5 kW. Also discussed are the benefits of operating with an atypical duty ratio on the transformer and a preferred multiphase configuration to minimize capacitor ripple currents.

  14. Aalborg Universitet Power flow analysis for droop controlled LV hybrid AC-DC microgrids with virtual

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    Aalborg Universitet Power flow analysis for droop controlled LV hybrid AC-DC microgrids controlled LV hybrid AC-DC microgrids with virtual impedance. In Proceedings of the IEEE Power & Energy Interlinking converter PV WT IBS DC microgrid DC microgrid AC microgrid AC Load Figure 1. Structure

  15. Switching power converter Figure 1(a): Switching DC-DC converter with analog voltage-mode control

    E-Print Network [OSTI]

    + ­ RC L Vg 1 2 i + v _ Vref + _ Gc(s) VM = 1 PWM u c Switching power converter H v dTs H = 1 design of digital compensators. I. INTRODUCTION Discrete-time modeling of dc-dc switching converters has IEEE. #12;+ ­ R C L Vg 1 2 i + v _ Vref + _ Gc(z) VM = 1 DPWM u c Switching power converter H v dTs H

  16. A High Efficiency DC-DC Converter Topology Suitable for Distributed Large Commercial and Utility Scale PV Systems

    SciTech Connect (OSTI)

    Mohammed S. Agamy; Maja Harfman-Todorovic; Ahmed Elasser; Robert L. Steigerwald; Juan A. Sabate; Song Chi; Adam J. McCann; Li Zhang; Frank Mueller

    2012-09-01

    In this paper a DC-DC power converter for distributed photovoltaic plant architectures is presented. The proposed converter has the advantages of simplicity, high efficiency, and low cost. High efficiency is achieved by having a portion of the input PV power directly fed forward to the output without being processed by the converter. The operation of this converter also allows for a simplified maximum power point tracker design using fewer measurements

  17. Materials with low DC magnetic susceptibility for sensitive magnetic measurements

    E-Print Network [OSTI]

    Khatiwada, Rakshya; Kendrick, Rachel; Khosravi, Marjan; Peters, Michael; Smith, Erick; Snow, Mike

    2015-01-01

    Materials with very low DC magnetic susceptibility have many scientific applications. To our knowledge however, relatively little research has been conducted with the goal to produce a totally nonmagnetic material. This phrase in our case means after spatially averaging over macroscopic volumes, it possesses an average zero DC magnetic susceptibility. We report measurements of the DC magnetic susceptibility of three different types of nonmagnetic materials at room temperature: (I) solutions of paramagnetic salts and diamagnetic liquids, (II) liquid gallium-indium alloys and (III) pressed powder mixtures of tungsten and bismuth. The lowest measured magnetic susceptibility among these candidate materials is in the order of 10^-9 cgs volume susceptibility units, about two orders of magnitude smaller than distilled water. In all cases, the measured concentration dependence of the magnetic susceptibility is consistent with that expected for the weighted sum of the susceptibilities of the separate components within...

  18. Nuclear magnetic resonance experiments with dc SQUID amplifiers

    SciTech Connect (OSTI)

    Heaney, M.B. . Dept. of Physics Lawrence Berkeley Lab., CA )

    1990-11-01

    The development and fabrication of dc SQUIDs (Superconducting QUantum Interference Devices) with Nb/Al{sub 2}O{sub 3}/Nb Josephson junctions is described. A theory of the dc SQUID as a radio-frequency amplifier is presented, with an optimization strategy that accounts for the loading and noise contributions of the postamplifier and maximizes the signal-to-noise ratio of the total system. The high sensitivity of the dc SQUID is extended to high field NMR. A dc SQUID is used as a tuned radio-frequency amplifier to detect pulsed nuclear magnetic resonance at 32 MHz from a metal film in a 3.5 Tesla static field. A total system noise temperature of 11 K has been achieved, at a bath temperature of 4.2 K. The minimum number of nuclear Bohr magnetons observable from a free precession signal after a single pulse is about 2 {times} 10{sup 17} in a bandwidth of 25 kHz. In a separate experiment, a dc SQUID is used as a rf amplifier in a NQR experiment to observe a new resonance response mechanism. The net electric polarization of a NaClO{sub 3} crystal due to the precessing electric quadrupole moments of the Cl nuclei is detected at 30 MHz. The sensitivity of NMR and NQR spectrometers using dc SQUID amplifiers is compared to the sensitivity of spectrometers using conventional rf amplifiers. A SQUID-based spectrometer has a voltage sensitivity which is comparable to the best achieved by a FET-based spectrometer, at these temperatures and operating frequencies.

  19. Graphite electrode DC arc furnace. Innovative technology summary report

    SciTech Connect (OSTI)

    1999-05-01

    The Graphite Electrode DC Arc Furnace (DC Arc) is a high-temperature thermal process, which has been adapted from a commercial technology, for the treatment of mixed waste. A DC Arc Furnace heats waste to a temperature such that the waste is converted into a molten form that cools into a stable glassy and/or crystalline waste form. Hazardous organics are destroyed through combustion or pyrolysis during the process and the majority of the hazardous metals and radioactive components are incorporated in the molten phase. The DC Arc Furnace chamber temperature is approximately 593--704 C and melt temperatures are as high as 1,500 C. The DC Arc system has an air pollution control system (APCS) to remove particulate and volatiles from the offgas. The advantage of the DC Arc is that it is a single, high-temperature thermal process that minimizes the need for multiple treatment systems and for extensive sorting/segregating of large volumes of waste. The DC Arc has the potential to treat a wide range of wastes, minimize the need for sorting, reduce the final waste volumes, produce a leach resistant waste form, and destroy organic contaminants. Although the DC arc plasma furnace exhibits great promise for treating the types of mixed waste that are commonly present at many DOE sites, several data and technology deficiencies were identified by the Mixed Waste Focus Area (MWFA) regarding this thermal waste processing technique. The technology deficiencies that have been addressed by the current studies include: establishing the partitioning behavior of radionuclides, surrogates, and hazardous metals among the product streams (metal, slag, and offgas) as a function of operating parameters, including melt temperature, plenum atmosphere, organic loading, chloride concentration, and particle size; demonstrating the efficacy of waste product removal systems for slag and metal phases; determining component durability through test runs of extended duration, evaluating the effect of feed composition variations on process operating conditions and slag product performance; and collecting mass balance and operating data to support equipment and instrument design.

  20. Inductorless DC-AC Cascaded H-bridge Multilevel Boost Inverter for Electric/Hybrid Electric Vehicle

    E-Print Network [OSTI]

    Tolbert, Leon M.

    - DC boost converter to boost the battery voltage for a traditional 3-phase inverter. The present HEV continuous power rating. Currently available power inverter systems for HEVs use a DC-DC boost converter power, the DC-DC boost converter is not needed and the battery voltage will be directly applied

  1. Characterization of the PvdS-regulated promoter motif in Pseudomonas syringae pv. tomato DC3000 reveals

    E-Print Network [OSTI]

    Myers, Chris

    Characterization of the PvdS-regulated promoter motif in Pseudomonas syringae pv. tomato DC3000S, a group IV sigma factor encoded by Pseudomonas syringae pv. tomato DC3000 (DC3000), a plant pathogen, 2002; Potvin et al., 2008). The model plant pathogen Pseudomonas syringae pv. tomato DC3000 (DC3000

  2. High voltage dc--dc converter with dynamic voltage regulation and decoupling during load-generated arcs

    DOE Patents [OSTI]

    Shimer, D.W.; Lange, A.C.

    1995-05-23

    A high-power power supply produces a controllable, constant high voltage output under varying and arcing loads. The power supply includes a voltage regulator, an inductor, an inverter for producing a high frequency square wave current of alternating polarity, an improved inverter voltage clamping circuit, a step up transformer, an output rectifier for producing a dc voltage at the output of each module, and a current sensor for sensing output current. The power supply also provides dynamic response to varying loads by controlling the voltage regulator duty cycle and circuitry is provided for sensing incipient arc currents at the output of the power supply to simultaneously decouple the power supply circuitry from the arcing load. The power supply includes a plurality of discrete switching type dc--dc converter modules. 5 Figs.

  3. High voltage dc-dc converter with dynamic voltage regulation and decoupling during load-generated arcs

    DOE Patents [OSTI]

    Shimer, Daniel W. (Danville, CA); Lange, Arnold C. (Livermore, CA)

    1995-01-01

    A high-power power supply produces a controllable, constant high voltage output under varying and arcing loads. The power supply includes a voltage regulator, an inductor, an inverter for producing a high frequency square wave current of alternating polarity, an improved inverter voltage clamping circuit, a step up transformer, an output rectifier for producing a dc voltage at the output of each module, and a current sensor for sensing output current. The power supply also provides dynamic response to varying loads by controlling the voltage regulator duty cycle and circuitry is provided for sensing incipient arc currents at the output of the power supply to simultaneously decouple the power supply circuitry from the arcing load. The power supply includes a plurality of discrete switching type dc--dc converter modules.

  4. D.C. Water Resource Research Center Annual Technical Report

    E-Print Network [OSTI]

    strengthening a credible program. Proposals submitted to USGS for the 2002 fiscal year was approved and funding to the success of the Institute. Hence, the goals of 2002 fiscal year will continue to fiscal 2003 while DC water resources information has been significantly delayed because UDC website, which hosts WRRI

  5. DC WRRC Report No. 59 DEVELOPMENT OF FREQUENCY

    E-Print Network [OSTI]

    District of Columbia, University of the

    #12;DC WRRC Report No. 59 DEVELOPMENT OF FREQUENCY FUNCTIONS FOR URBAN NON-POINT SOURCE RISK THE CATHOLIC UNIVERSITY OF AMERICA "This work on which this report is based was supported in part by funds guidance during the entire course of the work. Ms. Cathy Saunders served as research assistant

  6. DC WRRC Report No. 139 BOOK OF ABSTRACTS

    E-Print Network [OSTI]

    District of Columbia, University of the

    Washington, DC 20008 , (202) 274- 6400 #12;Table of Contents Preface i I. Social Sciences 1 II. Ground Water THE FEDERAL WATER POLLUTION CONTROL ACT AMENDMENTS OF 1972 Lieber, H. WRRC Report No. 17 DESCRWWRS: Management 208 of the Clean Water Act was examined. The accomplishments and failures of the 208 plans were

  7. Natural Gas Pipeline Leaks Across Washington, DC Robert B. Jackson,,,

    E-Print Network [OSTI]

    Jackson, Robert B.

    Natural Gas Pipeline Leaks Across Washington, DC Robert B. Jackson,,, * Adrian Down, Nathan G increased in recent decades, but incidents involving natural gas pipelines still cause an average of 17 fatalities and $133 M in property damage annually. Natural gas leaks are also the largest anthropogenic

  8. Winter Break Trip 2014 New York City & Washington DC

    E-Print Network [OSTI]

    Hutcheon, James M.

    Winter Break Trip 2014 New York City & Washington DC Tentative Trip Information December 13/Meadowlands 575 Park Plaza Drive Secaucus, NJ 07094 (201) 422-9480 Hotel is located 3 miles west of New York City for departure at 5pm. · Public Transportation to and from the city o Bus stop is at NW E ST & NW New Jersey Ave

  9. HYBRID DC ACCURATE CHARGE AMPLIFIER FOR LINEAR PIEZOELECTRIC POSITIONING

    E-Print Network [OSTI]

    Fleming, Andrew J.

    the diverse literature in- volving piezoelectric applications is the problem of hysteresis (Adriaens et alHYBRID DC ACCURATE CHARGE AMPLIFIER FOR LINEAR PIEZOELECTRIC POSITIONING Andrew J. Fleming, S. O, Australia 2308 Abstract: Piezoelectric transducers are known to exhibit less hysterisis when driven

  10. DC WRRC Report No. 170 Program ReportAnnual

    E-Print Network [OSTI]

    District of Columbia, University of the

    the people living in the north east of Washington, D.C. and measured the degree of their interest products constitute their endorsement by the United States Government. #12;The project entitled "A Pilot of groundwater inflows requires a knowledge of the hydraulic conductivity or permeability of the sediments

  11. Qualifying Exam Presentation: DC Discharge Studies Using PIC-MCC

    E-Print Network [OSTI]

    Wurtele, Jonathan

    Qualifying Exam Presentation: DC Discharge Studies Using PIC-MCC Jeffrey Hammel Department during cylindrical magnetron sputtering To assess the applicability of the PIC-MCC method for modeling;Presentation Overview I. Introduction II. Theory A. Paschen's Law B. Positive Column III. PIC-MCC Simulations A

  12. D.C. Water Resources Research Center Annual Technical Report

    E-Print Network [OSTI]

    of DC municipal drinking water quality through random sampling and testing of residential homes that could literally transform the lives of people, especially in the area of water availability. Mr. David. The Institute and the Cooperative Extension Service also added a solar powered weather station to the site

  13. Fuzzy Estimation of DC Motor Winding Currents Innovatia Software

    E-Print Network [OSTI]

    Simon, Dan

    Fuzzy Estimation of DC Motor Winding Currents Dan Simon Innovatia Software 775 Rothrock Circle °ux is rotated in the desired direction of ofuzzy ¯ltering to motor winding current estimation stator windings. an attractive alternative to current estimation using In order to implement an e

  14. DC powerline communication system using a transmission line transformer for high degree of freedom applications

    E-Print Network [OSTI]

    Wade, Eric R. (Eric Randolph), 1978-

    2004-01-01

    A new type of powerline communication is developed to reduce cable requirements for robotic, electromechanical, and vehicular systems. A DC power bus line connecting a DC power supply to motor drives and sensor units is ...

  15. If you reside in WASHINGTON, DC - MD -VA - WV your salary will...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    If you are employed in the WASHINGTON, DC Metropolitan Area (D.C., Baltimore, Northern VA, Eastern WV, and Southern PA) your salary will range from: Pay Band Pay Plan(s) Minimum...

  16. Energy Secretary Moniz's Remarks at CSIS in Washington D.C. on...

    Energy Savers [EERE]

    Moniz's Remarks at CSIS in Washington D.C. on Energy Security 40 Years after the Embargo - As Delivered Energy Secretary Moniz's Remarks at CSIS in Washington D.C. on Energy...

  17. D.C. Middle and High School Students Get a Chance to Experience...

    Energy Savers [EERE]

    D.C. Middle and High School Students Get a Chance to Experience the Regional Science Bowl Competition Setting D.C. Middle and High School Students Get a Chance to Experience the...

  18. Recovery Act: Integrated DC-DC Conversion for Energy-Efficient Multicore Processors

    SciTech Connect (OSTI)

    Shepard, Kenneth L

    2013-03-31

    In this project, we have developed the use of thin-film magnetic materials to improve in energy efficiency of digital computing applications by enabling integrated dc-dc power conversion and management with on-chip power inductors. Integrated voltage regulators also enables fine-grained power management, by providing dynamic scaling of the supply voltage in concert with the clock frequency of synchronous logic to throttle power consumption at periods of low computational demand. The voltage converter generates lower output voltages during periods of low computational performance requirements and higher output voltages during periods of high computational performance requirements. Implementation of integrated power conversion requires high-capacity energy storage devices, which are generally not available in traditional semiconductor processes. We achieve this with integration of thin-film magnetic materials into a conventional complementary metal-oxide-semiconductor (CMOS) process for high-quality on-chip power inductors. This project includes a body of work conducted to develop integrated switch-mode voltage regulators with thin-film magnetic power inductors. Soft-magnetic materials and inductor topologies are selected and optimized, with intent to maximize efficiency and current density of the integrated regulators. A custom integrated circuit (IC) is designed and fabricated in 45-nm CMOS silicon-on-insulator (SOI) to provide the control system and power-train necessary to drive the power inductors, in addition to providing a digital load for the converter. A silicon interposer is designed and fabricated in collaboration with IBM Research to integrate custom power inductors by chip stacking with the 45-nm CMOS integrated circuit, enabling power conversion with current density greater than 10A/mm2. The concepts and designs developed from this work enable significant improvements in performance-per-watt of future microprocessors in servers, desktops, and mobile devices. These new approaches to scaled voltage regulation for computing devices also promise significant impact on electricity consumption in the United States and abroad by improving the efficiency of all computational platforms. In 2006, servers and datacenters in the United States consumed an estimated 61 billion kWh or about 1.5% of the nation's total energy consumption. Federal Government servers and data centers alone accounted for about 10 billion kWh, for a total annual energy cost of about $450 million. Based upon market growth and efficiency trends, estimates place current server and datacenter power consumption at nearly 85 billion kWh in the US and at almost 280 billion kWh worldwide. Similar estimates place national desktop, mobile and portable computing at 80 billion kWh combined. While national electricity utilization for computation amounts to only 4% of current usage, it is growing at a rate of about 10% a year with volume servers representing one of the largest growth segments due to the increasing utilization of cloud-based services. The percentage of power that is consumed by the processor in a server varies but can be as much as 30% of the total power utilization, with an additional 50% associated with heat removal. The approaches considered here should allow energy efficiency gains as high as 30% in processors for all computing platforms, from high-end servers to smart phones, resulting in a direct annual energy savings of almost 15 billion kWh nationally, and 50 billion kWh globally. The work developed here is being commercialized by the start-up venture, Ferric Semiconductor, which has already secured two Phase I SBIR grants to bring these technologies to the marketplace.

  19. Fig.1: Digital Controller with modified buck-boost converter LOAD-INTERACTIVE STEERED-INDUCTOR DC-DC

    E-Print Network [OSTI]

    Prodiæ, Aleksandar

    Fig.1: Digital Controller with modified buck-boost converter LOAD-INTERACTIVE STEERED-INDUCTOR DC-inverting buck- boost. Transient response results show that, compared to standard converters with near-inverting buck-boost converter, i.e. steered-inductor buck-boost, a digital controller, and a communication block

  20. Building Scale DC Microgrids Chris Marnay, Steven Lanzisera, Michael Stadler, and Judy Lai

    E-Print Network [OSTI]

    of building loads are either native DC, such as electronics and compact fluorescent and light emitting diode

  1. Potential Federal On-Site Solar Aggregation in Washington, D.C., and Maryland

    Broader source: Energy.gov [DOE]

    Presentation describes potential Federal on-site solar aggregation opportunities in Washington, D.C., and Maryland.

  2. Interviews in Washington, DC for Albert Einstein Fellowship Semi-Finalists

    Broader source: Energy.gov [DOE]

    Selected semi-finalists in the Albert Einstein Distinguished Educator Fellowship are invited to DC for interviews.

  3. Demonstration of LED Retrofit Lamps at the Smithsonian Art Museum, Washington, DC

    SciTech Connect (OSTI)

    Miller, N. J.; Rosenfeld, S. M.

    2012-06-01

    GATEWAY program report on a demonstration of LED retrofit lamps at the Smithsonian American Art Museum in Washington, DC.

  4. Sputter target erosion and its effects on long duration DC magnetron sputter coating

    E-Print Network [OSTI]

    Schoff, Michael Elliott

    2009-01-01

    Duration DC Magnetron Sputter Coating A thesis submitted in1 II. Sputter Coating24 VII. Coating Rate vs.

  5. A nonlinear robust HVDC control for a parallel AC/DC power system

    E-Print Network [OSTI]

    Qu, Zhihua

    recognized that, through an HVDC transmission line, fast electronic control can be applied on the DC power, controlling DC line transmission power can improve stability of the AC system after a major disturbanceA nonlinear robust HVDC control for a parallel AC/DC power system Hongzhi Cai a , Zhihua Qu b

  6. Towards Building an Optimal Demand Response Framework for DC Distribution Networks

    E-Print Network [OSTI]

    Mohsenian-Rad, Hamed

    Towards Building an Optimal Demand Response Framework for DC Distribution Networks Hamed Mohsenian, an optimization-based foundation is proposed for demand response in DC distribution networks in presence to assess the performance and to gain insights into the proposed demand-response paradigm. Keywords: DC

  7. Aalborg Universitet Generation-Side Power Scheduling in a Grid-Connected DC Microgrid

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    Aalborg Universitet Generation-Side Power Scheduling in a Grid-Connected DC Microgrid Hernández). Generation-Side Power Scheduling in a Grid-Connected DC Microgrid. In IEEE ICDCM 2015. IEEE. General rights.aau.dk on: juli 04, 2015 #12;Generation-Side Power Scheduling in a Grid-Connected DC Microgrid Adriana C

  8. Aalborg Universitet Modeling, Stability Analysis and Active Stabilization of Multiple DC-Microgrids Clusters

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    Aalborg Universitet Modeling, Stability Analysis and Active Stabilization of Multiple DC-Microgrids and Active Stabilization of Multiple DC-Microgrids Clusters. In Proceedings of the 2014 IEEE International of Multiple DC-Microgrid Clusters," in Proc. IEEE International Energy Conference (EnergyCon'14), 2014

  9. Aalborg Universitet Agent-based distributed hierarchical control of dc microgrid systems

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    Aalborg Universitet Agent-based distributed hierarchical control of dc microgrid systems Meng, J. M., & Dragicevic, T. (2014). Agent-based distributed hierarchical control of dc microgrid systems-BASED DISTRIBUTED HIERARCHICAL CONTROL OF DC MICROGRID SYSTEMS Lexuan Meng, Tomislav Dragicevic, Josep M. Guerrero

  10. OLENDER REPORTING, INC. 1100 Connecticut Avenue NW, #810, Washington, DC 20036

    E-Print Network [OSTI]

    1 OLENDER REPORTING, INC. 1100 Connecticut Avenue NW, #810, Washington, DC 20036 Washington: 202 Avenue17 Washington, D.C.18 19 20 21 22 #12;2 OLENDER REPORTING, INC. 1100 Connecticut Avenue NW, #810 #12;3 OLENDER REPORTING, INC. 1100 Connecticut Avenue NW, #810, Washington, DC 20036 Washington: 202

  11. Control of a Fuel-Cell Powered DC Electric Vehicle Motor

    E-Print Network [OSTI]

    Skogestad, Sigurd

    Control of a Fuel-Cell Powered DC Electric Vehicle Motor Federico Zenith Sigurd Skogestad Meeting, 2005 www.ntnu.no Federico Zenith, Sigurd Skogestad, Control of a Fuel-Cell Powered DC Electric Vehicle Motor #12;2 Outline 1) Control of Fuel Cells--Status 2) Dynamic Modelling of Fuel Cells 3) DC

  12. Multilevel cascade voltage source inverter with separate DC sources

    DOE Patents [OSTI]

    Peng, F.Z.; Lai, J.S.

    1997-06-24

    A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations. 15 figs.

  13. Multilevel cascade voltage source inverter with seperate DC sources

    DOE Patents [OSTI]

    Peng, Fang Zheng (Oak Ridge, TN); Lai, Jih-Sheng (Knoxville, TN)

    1997-01-01

    A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations.

  14. Multilevel cascade voltage source inverter with seperate DC sources

    DOE Patents [OSTI]

    Peng, Fang Zheng; Lai, Jih-Sheng

    2001-04-03

    A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations.

  15. Multilevel cascade voltage source inverter with seperate DC sources

    DOE Patents [OSTI]

    Peng, Fang Zheng (Knoxville, TN); Lai, Jih-Sheng (Blacksburg, VA)

    2002-01-01

    A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations.

  16. AVTA: Battery Testing- DC Fast Charging's Effects on PEV Batteries

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The following report describes DC fast charging's effects on plug-in electric vehicle batteries. This research was conducted by Idaho National Laboratory.

  17. The Use of DC Glow Discharges as Undergraduate Educational Tools

    SciTech Connect (OSTI)

    Stephanie A. Wissel and Andrew Zwicker, Jerry Ross, and Sophia Gershman

    2012-10-09

    Plasmas have a beguiling way of getting students excited and interested in physics. We argue that plasmas can and should be incorporated into the undergraduate curriculum as both demonstrations and advanced investigations of electromagnetism and quantum effects. Our device, based on a direct current (DC) glow discharge tube, allows for a number of experiments into topics such as electrical breakdown, spectroscopy, magnetism, and electron temperature.

  18. dc-plasma-sprayed electronic-tube device

    DOE Patents [OSTI]

    Meek, T.T.

    1982-01-29

    An electronic tube and associated circuitry which is produced by dc plasma arc spraying techniques is described. The process is carried out in a single step automated process whereby both active and passive devices are produced at very low cost. The circuitry is extremely reliable and is capable of functioning in both high radiation and high temperature environments. The size of the electronic tubes produced are more than an order of magnitude smaller than conventional electronic tubes.

  19. Synthesis of silicon nanotubes by DC arc plasma method

    SciTech Connect (OSTI)

    Tank, C. M.; Bhoraskar, S. V.; Mathe, V. L.

    2012-06-05

    Plasma synthesis is a novel technique of synthesis of nanomaterials as they provide high rate of production and promote metastable reactions. Very thin walled silicon nanotubes were synthesized in a DC direct arc thermal plasma reactor. The effect of parameters of synthesis i.e. arc current and presence of hydrogen on the morphology of Si nanoparticles is reported. Silicon nanotubes were characterized by Transmission Electron Microscopy (TEM), Local Energy Dispersive X-ray analysis (EDAX), and Scanning Tunneling Microscopy (STM).

  20. Report on Non-Contact DC Electric Field Sensors

    SciTech Connect (OSTI)

    Miles, R; Bond, T; Meyer, G

    2009-06-16

    This document reports on methods used to measure DC electrostatic fields in the range of 100 to 4000 V/m using a non-contact method. The project for which this report is written requires this capability. Non-contact measurements of DC fields is complicated by the effect of the accumulation of random space-charges near the sensors which interfere with the measurement of the field-of-interest and consequently, many forms of field measurements are either limited to AC measurements or use oscillating devices to create pseudo-AC fields. The intent of this document is to report on methods discussed in the literature for non-contact measurement of DC fields. Electric field meters report either the electric field expressed in volts per distance or the voltage measured with respect to a ground reference. Common commercial applications for measuring static (DC) electric fields include measurement of surface charge on materials near electronic equipment to prevent arcing which can destroy sensitive electronic components, measurement of the potential for lightning to strike buildings or other exposed assets, measurement of the electric fields under power lines to investigate potential health risks from exposure to EM fields and measurement of fields emanating from the brain for brain diagnostic purposes. Companies that make electric field sensors include Trek (Medina, NY), MKS Instruments, Boltek, Campbell Systems, Mission Instruments, Monroe Electronics, AlphaLab, Inc. and others. In addition to commercial vendors, there are research activities continuing in the MEMS and optical arenas to make compact devices using the principles applied to the larger commercial sensors.

  1. USCOMM-WB-DC PRELIMZNARY REPORT OH HURRICANE DAISY

    E-Print Network [OSTI]

    QC 945.2 .D3 H8 1958 c.2 #12;#12;USCOMM-WB-DC #12;PRELIMZNARY REPORT OH HURRICANE DAISY AWGUST 24-29, 1958 Hurricane "Daisy", intense but small in area, was detected as a tropical storm about 300 miles into a hurricane on August 25. A u g u s t 27 it drifted very slowly northward. coast increased. the Atlantic off

  2. Energy Incentive Programs, Washington DC | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: AlternativeCommunication3-EDepartment ofArizona EnergyHampshire EnergyOregonTexasWashington DC

  3. Using Nyquist or Nyquist-Like Plot to Predict Three Typical Instabilities in DC-DC Converters

    E-Print Network [OSTI]

    Fang, Chung-Chieh

    2012-01-01

    By transforming an exact stability condition, a new Nyquist-like plot is proposed to predict occurrences of three typical instabilities in DC-DC converters. The three instabilities are saddle-node bifurcation (coexistence of multiple solutions), period-doubling bifurcation (subharmonic oscillation), and Neimark bifurcation (quasi-periodic oscillation). In a single plot, it accurately predicts whether an instability occurs and what type the instability is. The plot is equivalent to the Nyquist plot, and it is a useful design tool to avoid these instabilities. Nine examples are used to illustrate the accuracy of this new plot to predict instabilities in the buck or boost converter with fixed or variable switching frequency.

  4. Using Nyquist or Nyquist-Like Plot to Predict Three Typical Instabilities in DC-DC Converters

    E-Print Network [OSTI]

    Chung-Chieh Fang

    2012-04-09

    By transforming an exact stability condition, a new Nyquist-like plot is proposed to predict occurrences of three typical instabilities in DC-DC converters. The three instabilities are saddle-node bifurcation (coexistence of multiple solutions), period-doubling bifurcation (subharmonic oscillation), and Neimark bifurcation (quasi-periodic oscillation). In a single plot, it accurately predicts whether an instability occurs and what type the instability is. The plot is equivalent to the Nyquist plot, and it is a useful design tool to avoid these instabilities. Nine examples are used to illustrate the accuracy of this new plot to predict instabilities in the buck or boost converter with fixed or variable switching frequency.

  5. Multiphase soft switched DC/DC converter and active control technique for fuel cell ripple current elimination

    DOE Patents [OSTI]

    Lai, Jih-Sheng (Blacksburg, VA); Liu, Changrong (Sunnyvale, CA); Ridenour, Amy (Salem, VA)

    2009-04-14

    DC/DC converter has a transformer having primary coils connected to an input side and secondary coils connected to an output side. Each primary coil connects a full-bridge circuit comprising two switches on two legs, the primary coil being connected between the switches on each leg, each full-bridge circuit being connected in parallel wherein each leg is disposed parallel to one another, and the secondary coils connected to a rectifying circuit. An outer loop control circuit that reduces ripple in a voltage reference has a first resistor connected in series with a second resistor connected in series with a first capacitor which are connected in parallel with a second capacitor. An inner loop control circuit that reduces ripple in a current reference has a third resistor connected in series with a fourth resistor connected in series with a third capacitor which are connected in parallel with a fourth capacitor.

  6. Deep Trench Capacitor based Step-up and Step-down DC/DC Converters in 32nm SOI with Opportunistic

    E-Print Network [OSTI]

    Sapatnekar, Sachin

    Deep Trench Capacitor based Step-up and Step-down DC/DC Converters in 32nm SOI with Opportunistic domains. Using ultra-high density deep trench capacitors, we are able to achieve an output power density-power domain scenario by implementing a bi-directional opportunistic current borrowing scheme. Deep trench

  7. Abstract--Emerging high-end portable electronics demand on-chip integration of high-performance dc-dc power supplies not

    E-Print Network [OSTI]

    Rincon-Mora, Gabriel A.

    series resistance (ESR) output capacitors, it is not clear how it applies to boost converters boost converter. Experimental results verified the switching supply was stable across 1-30µH, 1-350µ variation to less than 27%. Index Terms--differential control, boost dc-dc converter I. INTRODUCTION

  8. SoC Energy Savings = Reduce+Reuse+Recycle: A Case Study Using a 660MHz DC-DC Converter with Integrated Output Filter

    E-Print Network [OSTI]

    Lemieux, Guy

    that requires careful planning of the interface between the provider and receptor of the energy. In this paper between energy provider and receptor. Since fully integrated on-chip regulators are usually inefficientSoC Energy Savings = Reduce+Reuse+Recycle: A Case Study Using a 660MHz DC-DC Converter

  9. 2004 35Ih Annual IEEE Power Elearonics Specialisrs Conference Aachen, Germany,2004 Modeling of Quantization Effects in Digitally Controlled DC-DC Converters

    E-Print Network [OSTI]

    Prodiæ, Aleksandar

    : {hpeng,maksimov)@colorado.edu Abstract- In digitally controlled DC-DC converters with a single voltage variations, programmability, reduction or elimination of external passive components, as well a conservative hound for the limit-cycle oscillation amplitude, while Section VI11 summarizes the conclusions. 11

  10. 26.2 Single-Inductor Dual-Input Dual-Output Buck-Boost Fuel Cell-Li Ion Charging DC-DC Converter Supply

    E-Print Network [OSTI]

    Rincon-Mora, Gabriel A.

    1 26.2 Single-Inductor Dual-Input Dual-Output Buck-Boost Fuel Cell-Li Ion Charging DC-DC Converter battery with its energy-dense counterpart like the fuel cell (FC) improves micro-scale integration [2]. As a result, buck or boost single-inductor, dual-input, dual-output (SIDIDO) converters enjoy

  11. Abstract -This paper presents the coordinated control of distributed energy storage systems (DESSs) in DC micro-grids.

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    ) in DC micro-grids. In order to balance the state-of-charge (SoC) of each energy storage unit (ESU--Droop control; distributed energy storage system (DESS); DC micro-grids; state-of-charge (SoC) I. INTRODUCTION and more popularity [1]. Nowadays DC micro-grids are becoming more attractive with the raise of DC power

  12. 650 IEEE TRANSACTIONS ON POWER DELIVERY, VOL. 26, NO. 2, APRIL 2011 Hourly Scheduling of DC Transmission Lines in

    E-Print Network [OSTI]

    Fu, Yong

    ). The impact of VSC-DC transmission system on the economics and the security of integrated ac/dc transmission will determine the optimal hourly schedule of controllable VSC-DC transmission systems in electricity markets;LOTFJOU et al.: HOURLY SCHEDULING OF DC TRANSMISSION LINES 651 , Vector of real and reactive power

  13. 936 IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 50, NO. 5, OCTOBER 2003 Gain Adaptation of Networked DC Motor Controllers

    E-Print Network [OSTI]

    Chow, Mo-Yuen

    ) milling machine, dc motors can be connected to controllers, drivers and sensors by directly wiring

  14. Materials with low DC magnetic susceptibility for sensitive magnetic measurements

    E-Print Network [OSTI]

    Rakshya Khatiwada; Lawrence Dennis; Rachel Kendrick; Marjan Khosravi; Michael Peters; Erick Smith; Mike Snow

    2015-06-30

    Materials with very low DC magnetic susceptibility have many scientific applications. To our knowledge however, relatively little research has been conducted with the goal to produce a totally nonmagnetic material. This phrase in our case means after spatially averaging over macroscopic volumes, it possesses an average zero DC magnetic susceptibility. We report measurements of the DC magnetic susceptibility of three different types of nonmagnetic materials at room temperature: (I) solutions of paramagnetic salts and diamagnetic liquids, (II) liquid gallium-indium alloys and (III) pressed powder mixtures of tungsten and bismuth. The lowest measured magnetic susceptibility among these candidate materials is in the order of 10^-9 cgs volume susceptibility units, about two orders of magnitude smaller than distilled water. In all cases, the measured concentration dependence of the magnetic susceptibility is consistent with that expected for the weighted sum of the susceptibilities of the separate components within experimental error. These results verify the Wiedemann additivity law and thereby realize the ability to produce materials with small but tunable magnetic susceptibility. For our particular scientific application, we are also looking for materials with the largest possible number of neutrons and protons per unit volume. The gallium-indium alloys fabricated and measured in this work possess to our knowledge the smallest ratio of volume magnetic susceptibility to nucleon number density per unit volume for a room temperature liquid, and the tungsten-bismuth pressed powder mixtures possess to our knowledge the smallest ratio of volume magnetic susceptibility to nucleon number density per unit volume for a room temperature solid. This ratio is a figure of merit for a certain class of precision experiments that search for possible exotic spin-dependent forces of Nature.

  15. Positron lifetime spectrometer using a DC positron beam

    DOE Patents [OSTI]

    Xu, Jun; Moxom, Jeremy

    2003-10-21

    An entrance grid is positioned in the incident beam path of a DC beam positron lifetime spectrometer. The electrical potential difference between the sample and the entrance grid provides simultaneous acceleration of both the primary positrons and the secondary electrons. The result is a reduction in the time spread induced by the energy distribution of the secondary electrons. In addition, the sample, sample holder, entrance grid, and entrance face of the multichannel plate electron detector assembly are made parallel to each other, and are arranged at a tilt angle to the axis of the positron beam to effectively separate the path of the secondary electrons from the path of the incident positrons.

  16. Hardwired Control Changes For NSTX DC Power Feeds

    SciTech Connect (OSTI)

    Ramakrishnan, S.

    2013-06-28

    The National Spherical Torus Experiment (NSTX) has been designed and installed in the existing facilities at Princeton Plasma Physics Laboratory (PPPL). Most of the hardware, plant facilities, auxiliary sub-systems, and power systems originally used for the Tokamak Fusion Test Reactor (TFTR) have been used with suitable modifications to reflect NSTX needs. The original TFTR Hardwired Control System (HCS) with electromechanical relays was used for NSTX DC Power loop control and protection during NSTX operations. As part of the NSTX Upgrade, the HCS is being changed to a PLC-based system with the same control logic. This paper gives a description of the changeover to the new PLC-based system __________________________________________________

  17. Heteroepitaxial Ge-on-Si by DC magnetron sputtering

    SciTech Connect (OSTI)

    Steglich, Martin; Schrempel, Frank; Füchsel, Kevin; Kley, Ernst-Bernhard; Patzig, Christian; Berthold, Lutz; Höche, Thomas; Tünnermann, Andreas; Fraunhofer Institute for Applied Optics and Precision Engineering IOF, Albert-Einstein-Str. 7, 07745 Jena

    2013-07-15

    The growth of Ge on Si(100) by DC Magnetron Sputtering at various temperatures is studied by Spectroscopic Ellipsometry and Transmission Electron Microscopy. Smooth heteroepitaxial Ge films are prepared at relatively low temperatures of 380°C. Typical Stransky-Krastanov growth is observed at 410°C. At lower temperatures (320°C), films are essentially amorphous with isolated nanocrystallites at the Si-Ge interface. A minor oxygen contamination at the interface, developing after ex-situ oxide removal, is not seen to hinder epitaxy. Compensation of dislocation-induced acceptors in Ge by sputtering from n-doped targets is proposed.

  18. EA-327-A DC Energy, LLC | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy A plug-inPPL EnergyPlus, LLC to export electricSilverhill Ltdto export electricDC

  19. EA-351 DC Energy Dakota, LLC | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy A plug-inPPL EnergyPlus, LLC to export electricSilverhillSaracenCreditNextEraDC

  20. EA-377 DC Energy Texas | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy A plug-inPPL EnergyPlus, LLC to exportEndure Energy,Vitol Inc toDC Energy Texas to

  1. Category:DC Resistivity Survey (Wenner Array) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmentalBowerbank,Cammack Village,8199089°,AnalyticalCuttings Analysis JumpDC Resistivity

  2. Global DC Power System Market Analysis | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource History View New Pages RecentPlant <SilverChange Associates JumpGlobal DC Power

  3. DC Resistivity Survey (Dipole-Dipole Array) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePower VenturesInformation9) Wind Farm JumpAlum|Cyclone PowerD1DC

  4. Categorical Exclusion Determinations: Washington, D.C. | Department of

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p a lCaribElectricSouth Dakota. DOCUMENTSEnergy Washington, D.C.

  5. Single-mode deformation via nanoindentation in dc-Si

    SciTech Connect (OSTI)

    Wong, Sherman; Haberl, Bianca; Williams, James S.; Bradby, Jodie E.

    2015-01-01

    The mixture of the metastable body-centered cubic (bc8) and rhombohedral (r8) phases of silicon that is formed via nanoindentation of diamond cubic (dc) silicon exhibits properties that are of scientifc and technological interest. This letter demonstrates that large regions of this mixed phase can be formed in crystalline Si via nanoindentation without signifcant damage to the surrounding crystal. Cross-sectional transmission electron microscopy is used to show that volumes 6 um wide and up to 650 nm deep can be generated in this way using a spherical tip of 21.5 um diameter. The phase transformed region is characterised using both Raman microspectroscopy and transmission electron microscopy. It is found that uniform loading using large spherical indenters can favor phase transformation as the sole deformation mechanism as long as the maximum load is below a critical level. We suggest that the sluggish nature of the transformation from the dc-Si phase to the metallic (b-Sn) phase normally results in competing deformation mechanisms such as slip and cracking but these can be suppressed by controlled loading conditions.

  6. DC switching regulated power supply for driving an inductive load

    DOE Patents [OSTI]

    Dyer, G.R.

    1983-11-29

    A dc switching regulated power supply for driving an inductive load is provided. The regulator basic circuit is a bridge arrangement of diodes and transistors. First and second opposite legs of the bridge are formed by first and second parallel-connected transistor arrays, respectively, while the third and fourth legs of the bridge are formed by appropriately connected first and second parallel connected diode arrays, respectively. A dc power supply is connected to the input of the bridge and the output is connected to the load. A servo controller is provided to control the switching rate of the transistors to maintain a desired current to the load. The regulator may be operated in three stages or modes: (1) for current runup in the load, both first and second transistor switch arrays are turned on and current is supplied to the load through both transistor arrays. (2) When load current reaches the desired level, the first switch is turned off, and load current flywheels through the second switch array and the fourth leg diode array connecting the second switch array in series with the load. Current is maintained by alternating between modes 1 and 2 at a suitable duty cycle and switching rate set by the controller. (3) Rapid current rundown is accomplished by turning both switch arrays off, allowing load current to be dumped back into the source through the third and fourth diode arrays connecting the source in series opposition with the load to recover energy from the inductive load.

  7. Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    ballast fluorescent and LED lighting, which are DC- internalmotors [7]. Fluorescent and LED lighting uses one-quarter ofbest technology Lighting Incandescent, fluorescent, LED

  8. Harnessing the Power of the Sun, Solar Impulse Plane Lands in DC Area

    Office of Energy Efficiency and Renewable Energy (EERE)

    Today, Secretary Moniz spoke at an event welcoming the arrival of the solar-powered Solar Impulse plane at Dulles International Airport near Washington, D.C.

  9. Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    motors [7]. Fluorescent and LED lighting uses one-quarter ofballast fluorescent and LED lighting, which are DC- internalbest technology Lighting Incandescent, fluorescent, LED

  10. DC Resistivity Survey (Dipole-Dipole Array) At Mt Princeton Hot...

    Open Energy Info (EERE)

    1971) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: DC Resistivity Survey (Dipole-Dipole Array) At Mt Princeton Hot Springs Geothermal Area...

  11. Optimization of spin-torque switching using AC and DC pulses

    SciTech Connect (OSTI)

    Dunn, Tom [Department of Physics, University of Minnesota, Minneapolis, Minnesota 55455 (United States); Kamenev, Alex [Department of Physics, University of Minnesota, Minneapolis, Minnesota 55455 (United States); Fine Theoretical Physics Institute, University of Minnesota, Minneapolis, Minnesota 55455 (United States)

    2014-06-21

    We explore spin-torque induced magnetic reversal in magnetic tunnel junctions using combined AC and DC spin-current pulses. We calculate the optimal pulse times and current strengths for both AC and DC pulses as well as the optimal AC signal frequency, needed to minimize the Joule heat lost during the switching process. The results of this optimization are compared against numeric simulations. Finally, we show how this optimization leads to different dynamic regimes, where switching is optimized by either a purely AC or DC spin-current, or a combination AC/DC spin-current, depending on the anisotropy energies and the spin-current polarization.

  12. SECONDARY MINERALS FOUND IN CORES DC2 Al AND DC2 TAKEN FROM THE GRANDE RONDE BASALT FORMATION, PASCO BASIN, WASHINGTON

    E-Print Network [OSTI]

    Teague, L.S.

    2010-01-01

    of secondary and primary mineral phases in basalts of theB. , 1975. Perched silia minerals on mordenite fibers. Jour.lt;. UC—70 I SECONDARY MINERALS FOUND IN CORES DC2 AI AND

  13. Discharging a DC bus capacitor of an electrical converter system

    DOE Patents [OSTI]

    Kajouke, Lateef A; Perisic, Milun; Ransom, Ray M

    2014-10-14

    A system and method of discharging a bus capacitor of a bidirectional matrix converter of a vehicle are presented here. The method begins by electrically shorting the AC interface of the converter after an AC energy source is disconnected from the AC interface. The method continues by arranging a plurality of switching elements of a second energy conversion module into a discharge configuration to establish an electrical current path from a first terminal of an isolation module, through an inductive element, and to a second terminal of the isolation module. The method also modulates a plurality of switching elements of a first energy conversion module, while maintaining the discharge configuration of the second energy conversion module, to at least partially discharge a DC bus capacitor.

  14. Thermal cum DC Camouflage in Duet with Undecorated Natural Materials

    E-Print Network [OSTI]

    Yang, Tian-Zhi; Gao, Dongliang; Wu, Linzhi; Li, Baowen; Thong, John T L; Qiu, Cheng-Wei

    2015-01-01

    To manipulate various types of physical signals in one single device has long captivated the attention of scientists and engineers. This however is very challenging, if not impossible, even for emerging metamaterials. Up to date, many artificial materials have been proposed, theoretically and (or) experimentally, for manipulating various waves/signals on a one-function-one-device basis. In this work, for the very first time, we employ undecorated natural materials to experimentally demonstrate a simultaneous camouflage for thermal current and electric dc current on the same device. It demonstrates how ingenuity can overcome the limitations of natural material systems without the need for complex decoration to impart inhomogeneous and (or) anisotropic properties, which was previously considered impossible to accomplish except by using metamaterials.

  15. FLUXCAP: A flux-coupled ac/dc magnetizing device

    E-Print Network [OSTI]

    Gopman, Daniel B; Kent, Andrew D

    2012-01-01

    We report on an instrument for applying ac and dc magnetic fields by capturing the flux from a rotating permanent magnet and projecting it between two adjustable pole pieces. This can be an alternative to standard electromagnets for experiments with small samples or in probe stations in which an applied magnetic field is needed locally, with advantages that include a compact form-factor, very low power requirements and dissipation as well as fast field sweep rates. This flux capture instrument (FLUXCAP) can produce fields from -400 to +400 mT, with field resolution less than 1 mT. It generates static magnetic fields as well as ramped fields, with ramping rates as high as 10 T/s. We demonstrate the use of this apparatus for studying the magnetotransport properties of spin-valve nanopillars, a nanoscale device that exhibits giant magnetoresistance.

  16. Superconducting DC and RF Properties of Ingot Niobium

    SciTech Connect (OSTI)

    Pashupati Dhakal, Gianluigi Ciovati, Peter Kneisel, Ganapati Rao Myneni

    2011-07-01

    The thermal conductivity, DC magnetization and penetration depth of large-grain niobium hollow cylindrical rods fabricated from ingots, manufactured by CBMM subjected to chemical and heat treatment were measured. The results confirm the influence of chemical and heat-treatment processes on the superconducting properties, with no significant dependence on the impurity concentrations in the original ingots. Furthermore, RF properties, such as the surface resistance and quench field of the niobium rods were measured using a TE{sub 011} cavity. The hollow niobium rod is the center conductor of this cavity, converting it to a coaxial cavity. The quench field is limited by the critical heat flux through the rods' cooling channel.

  17. Possible temperature control DC switch effect between two superconductors

    E-Print Network [OSTI]

    Tian De Cao

    2011-08-11

    The lifetime of an electron pair could not be unlimited long, on the basis of this, we suggest a model. The model means that the movements of charge carriers in a superconductor should have three forms: the single-electron movement, the single-pair movement, and the revolving around the mass center of two electrons in a pair. Thus the current in a superconductor has three possible parts. Similarly, there should be three possible effects in a SIS junction: the tunneling of single electron, the tunneling of single pair, and the pair-forming following the pair-breaking. This paper will discuss these problems and present a possible temperature control DC switch effect between two superconductors.

  18. Multi-terminal Subsystem Model Validation for Pacific DC Intertie

    SciTech Connect (OSTI)

    Yang, Bo; Huang, Zhenyu; Kosterev, Dmitry

    2008-07-20

    this paper proposes to validate dynamic model of Pacific DC Intertie with the concept of hybrid simulation by combing simulation with PMU measurements. The Playback function available in GE PSLF is adopted for hybrid simulation. It is demonstrated for the first time the feasibility of using Playback function on multi-terminal subsystem. Sensitivity studies are also presented as a result of common PMU measurement quality problem, ie, offset noise and time synchronization. Results indicate a good tolerance of PDCI model generally. It is recommended that requirements should apply to phasor measurements in model validation work to ensure better analysis. Key parameters are identified based on impact of value change to model behavior. Two events are employed for preliminary model validation with PMU measurements. Suggestions are made for PDCI model validation work in the future.

  19. Effect of DC voltage pulses on memristor behavior.

    SciTech Connect (OSTI)

    Evans, Brian R.

    2013-10-01

    Current knowledge of memristor behavior is limited to a few physical models of which little comprehensive data collection has taken place. The purpose of this research is to collect data in search of exploitable memristor behavior by designing and implementing tests on a HP Labs Rev2 Memristor Test Board. The results are then graphed in their optimal format for conceptualizing behavioral patterns. This series of experiments has concluded the existence of an additional memristor state affecting the behavior of memristors when pulsed with positively polarized DC voltages. This effect has been observed across multiple memristors and data sets. The following pages outline the process that led to the hypothetical existence and eventual proof of this additional state of memristor behavior.

  20. Auxiliary quasi-resonant dc tank electrical power converter

    DOE Patents [OSTI]

    Peng, Fang Z.

    2006-10-24

    An auxiliary quasi-resonant dc tank (AQRDCT) power converter with fast current charging, voltage balancing (or charging), and voltage clamping circuits is provided for achieving soft-switched power conversion. The present invention is an improvement of the invention taught in U.S. Pat. No. 6,111,770, herein incorporated by reference. The present invention provides faster current charging to the resonant inductor, thus minimizing delay time of the pulse width modulation (PWM) due to the soft-switching process. The new AQRDCT converter includes three tank capacitors or power supplies to achieve the faster current charging and minimize the soft-switching time delay. The new AQRDCT converter further includes a voltage balancing circuit to charge and discharge the three tank capacitors so that additional isolated power supplies from the utility line are not needed. A voltage clamping circuit is also included for clamping voltage surge due to the reverse recovery of diodes.

  1. Materials with low DC magnetic susceptibility for sensitive magnetic measurements R. Khatiwada,1, 2, 3,

    E-Print Network [OSTI]

    Materials with low DC magnetic susceptibility for sensitive magnetic measurements R. Khatiwada,1, 2 (Dated: July 1, 2015) Materials with very low DC magnetic susceptibility have many scientific a totally nonmagnetic material. This phrase in our case means after spatially averaging over macroscopic

  2. Nonlinear Dust Acoustic Waves, Shocks and Stationary Structures in a DC Glow Discharge Dusty Plasma

    E-Print Network [OSTI]

    Merlino, Robert L.

    Nonlinear Dust Acoustic Waves, Shocks and Stationary Structures in a DC Glow Discharge Dusty Plasma drifting dusty plasmas and temporal dust acoustic wave growth Phys. Plasmas 18, 113706 (2011) Modulational;Nonlinear Dust Acoustic Waves, Shocks and Stationary Structures in a DC Glow Discharge Dusty Plasma Robert L

  3. DC WRRC Report No. 178 AN EXPERIMENTAL STUDY OF THE OPTIMAL THICKNESS OF A SAND

    E-Print Network [OSTI]

    District of Columbia, University of the

    FILTER WATER QUALITY STRUCTURE July 1994 D.C. Water Resources Research Center University of the District OF THE OPTIMAL THICKNESS OF A SAND LAYER IN A SAND FILTER WATER QUALITY STRUCTURE Submitted by: Farshad Amini THICKNESS OF A SAND LAYER IN A SAND FILTER WATER QUALITY STRUCTURE July 1994 D.C. Water Resources Research

  4. EE443L: Intermediate Control Lab Lab2: Modeling a DC motor

    E-Print Network [OSTI]

    Wedeward, Kevin

    EE443L: Intermediate Control Lab Lab2: Modeling a DC motor Introduction: In this lab we will develop and validate a basic model of a permanent magnet DC motor (Yaskawa Electric, Mini-series, Minertia motor). The specific input/output relationship, which we are interested in determining, is the manner

  5. www.sciencemag.org/cgi/content/full/342/6155/224/DC1 Supplementary Materials for

    E-Print Network [OSTI]

    McEuen, Paul L.

    www.sciencemag.org/cgi/content/full/342/6155/224/DC1 Supplementary Materials for Imaging Atomic the following: (available at www.sciencemag.org/cgi/content/full/342/6155/224/DC1) Movies S1 to S5 #12;2 Materials and Methods Transmission electron microscopy (TEM )Imaging Transmission electron microscopy (TEM

  6. Aalborg Universitet Intelligent DC Microgrid Living Laboratories -A Chinese-Danish Project

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    Aalborg Universitet Intelligent DC Microgrid Living Laboratories - A Chinese-Danish Project Diaz Microgrid Living Laboratories - A Chinese-Danish Project. In IEEE ICDCM 2015. IEEE Press. General rights.aau.dk on: juli 07, 2015 #12;Intelligent DC Microgrid Living Laboratories - A Chinese-Danish Project Enrique

  7. A Scalable DC Microgrid Architecture for Rural Electrification in Emerging Regions

    E-Print Network [OSTI]

    Sanders, Seth

    A Scalable DC Microgrid Architecture for Rural Electrification in Emerging Regions P. Achintya the design and experimental validation of a scalable dc microgrid architecture for rural electrification. The microgrid design has been driven by field data collected from Kenya and India. The salient features

  8. Aalborg Universitet Distributed Consensus-Based Control of Multiple DC-Microgrids Clusters

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    Aalborg Universitet Distributed Consensus-Based Control of Multiple DC-Microgrids Clusters Shafiee). Distributed Consensus-Based Control of Multiple DC-Microgrids Clusters. In Proceedings of the 40th Annual.aau.dk on: juli 05, 2015 #12;This document downloaded from www.microgrids.et.aau.dk is a preprint

  9. Zeroing Transformer's DC Current in Resonant Converters with No Series Capacitors

    E-Print Network [OSTI]

    Gertsman, Student Member, IEEE and Sam Ben-Yaakov ,Fellow, IEEE Power Electronics Laboratory Department: www.ee.bgu.ac.il/~pel Abstract - DC current unbalance in the windings of a transformer may initiate the transformer's DC current to zero by correcting the asymmetry of the drive. This balancing control

  10. Aalborg Universitet Distributed Bus Signaling Control for a DC Charging Station with Multi Paralleled

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    been reported in order to verify the validity of proposed approach. Keywords--EV charging; flywheelAalborg Universitet Distributed Bus Signaling Control for a DC Charging Station with Multi., & Savaghebi, M. (2015). Distributed Bus Signaling Control for a DC Charging Station with Multi Paralleled

  11. Genomic Plasticity Enables Phenotypic Variation of Pseudomonas syringae pv. tomato DC3000

    E-Print Network [OSTI]

    Myers, Chris

    Genomic Plasticity Enables Phenotypic Variation of Pseudomonas syringae pv. tomato DC3000 Zhongmeng of a genomic anomaly in the region of 4.7 to 4.9 Mb of the Pseudomonas syringae pv. tomato (Pst) DC3000 genome in P. syringae. Citation: Bao Z, Stodghill PV, Myers CR, Lam H, Wei H-L, et al. (2014) Genomic

  12. The Data Center (DC) Genome project is a collaborative effort with Microsoft Research

    E-Print Network [OSTI]

    Amir, Yair

    DC Genome The Data Center (DC) Genome project is a collaborative effort with Microsoft Research the efficiency of data center operations and thus minimize their environmental impact. Data center energy about carbon footprints and climate change. Lack of visibility into the data center's operating

  13. DC Discharge Studies Using PIC-MCC Jeff Hammel and John Verboncoeur

    E-Print Network [OSTI]

    Wurtele, Jonathan

    DC Discharge Studies Using PIC-MCC Jeff Hammel and John Verboncoeur March 31, 2004 1 Introduction (PIC-MCC) method. PIC-MCC is used to accurately model kinetic processes present in DC discharges PIC. Cross-validation of PIC-MCC simulation and analysis may be used to improved both computational

  14. D.C. Community Comes Together in the Name of Sustainability, Affordability

    Broader source: Energy.gov [DOE]

    The New School for Design and Stevens Institute of Technology 2011 Solar Decathlon team is partnering with D.C. community members and Habitat for Humanity to build an energy efficient home that will be moved to the Deanwood neighborhood of Washington, D.C. following the competition.

  15. Reid Rosnick/DC/USEPA/US 10/25/2012 11:54 AM

    E-Print Network [OSTI]

    Management and Regulations Washington, DC phone: 202-343-9186 email: egidi.philip@epa.gov cell: 970 Washington, DC phone: 202-343-9186 email: egidi.philip@epa.gov cell: 970-209-2885 Reid Rosnick---10! ------------------------------------------------------------------------------------------------------ -------- Reid J. Rosnick Radiation Protection Division (6608J) U.S. Environmental Protection Agency 1200

  16. Parametric Study of PV Arc-Fault Generation Methods and Analysis of Conducted DC Spectrum

    E-Print Network [OSTI]

    Parametric Study of PV Arc-Fault Generation Methods and Analysis of Conducted DC Spectrum Jay photovoltaic (PV) direct current (DC) arc- fault detectors use the frequency content of the PV system to detect by different PV arcs in the field. In this investigation, we (a) discuss the differences in establishing

  17. Adaptive Selective Harmonic Minimization Based on ANNs for Cascade Multilevel Inverters With Varying DC Sources

    SciTech Connect (OSTI)

    Filho, Faete [ORNL; Maia, Helder Z [UFMS, Department of Electrical Engineering; Mateus, Tiago Henrique D [ORNL; Ozpineci, Burak [ORNL; Tolbert, Leon M [ORNL; Pinto, Joao Onofre P [ORNL

    2013-01-01

    A new approach for modulation of an 11-level cascade multilevel inverter using selective harmonic elimination is presented in this paper. The dc sources feeding the multilevel inverter are considered to be varying in time, and the switching angles are adapted to the dc source variation. This method uses genetic algorithms to obtain switching angles offline for different dc source values. Then, artificial neural networks are used to determine the switching angles that correspond to the real-time values of the dc sources for each phase. This implies that each one of the dc sources of this topology can have different values at any time, but the output fundamental voltage will stay constant and the harmonic content will still meet the specifications. The modulating switching angles are updated at each cycle of the output fundamental voltage. This paper gives details on the method in addition to simulation and experimental results.

  18. Property:AvgTempGeoFluidIntoPlant | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland:NPIProtectio1975)Energy Technology JumpWilliamDRAFTArea Jump

  19. Property:CoolingTowerWaterUseAnnlAvgGross | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland:NPIProtectio1975)EnergyFloorAreaOfficesCollaborators Jump to:Capacity Jump

  20. Property:CoolingTowerWaterUseAnnlAvgConsumed | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceIIInformationEnergyReportNumber JumpConference Jump

  1. Narrating Washington, D.C. from the Margins: Urban Space and Cultural Identity in "Lost in the City" and "The Beautiful Things that Heaven Bears"

    E-Print Network [OSTI]

    Brown, Jessica M

    2011-01-01

    and Urban Space in Washington, D.C. Chicago: University ofBrookings Institution. Washington, D.C. Gillette, Howard Jr.of Urban Policy in Washington, D.C. (2006). Baltimore: The

  2. Proceedings of WindPower 95, AWEA, Washington, D.C., 1995. FATIGUE DAMAGE ESTIMATE COMPARISONS FOR

    E-Print Network [OSTI]

    Proceedings of WindPower 95, AWEA, Washington, D.C., 1995. FATIGUE DAMAGE ESTIMATE COMPARISONS," Proceedings of WindPower `95, AWEA, Washington, DC, March, 1995, pp. 177-186. * This work is supported

  3. Insertion sequence 5 at various upstream locations of the flhDC operon causes Escherichia coli hyper motility

    E-Print Network [OSTI]

    Wang, Jing

    2010-01-01

    locations of the flhDC operon causes Escherichia coli Hyperlocations of the PflhDC operon causes Escherichia coli Hyperof the transposing segment causes the formation of co-

  4. 1620 IEEE TRANSACTIONS ON POWER DELIVERY, VOL. 27, NO. 3, JULY 2012 Hybrid AC/DC Transmission Expansion Planning

    E-Print Network [OSTI]

    Fu, Yong

    1620 IEEE TRANSACTIONS ON POWER DELIVERY, VOL. 27, NO. 3, JULY 2012 Hybrid AC/DC Transmission--This paper proposes a hybrid algorithm for the ac/dc transmission expansion planning (TEP). The stochastic simulation method would consider random outages of generating units and ac/dc transmission lines as well

  5. DC switching regulated power supply for driving an inductive load

    DOE Patents [OSTI]

    Dyer, George R. (Norris, TN)

    1986-01-01

    A power supply for driving an inductive load current from a dc power supply hrough a regulator circuit including a bridge arrangement of diodes and switching transistors controlled by a servo controller which regulates switching in response to the load current to maintain a selected load current. First and second opposite legs of the bridge are formed by first and second parallel-connected transistor arrays, respectively, while the third and fourth legs of the bridge are formed by appropriately connected first and second parallel connected diode arrays, respectively. The regulator may be operated in three "stages" or modes: (1) For current runup in the load, both first and second transistor switch arrays are turned "on" and current is supplied to the load through both transistor arrays. (2) When load current reaches the desired level, the first switch is turned "off", and load current "flywheels" through the second switch array and the fourth leg diode array connecting the second switch array in series with the load. Current is maintained by alternating between modes 1 and 2 at a suitable duty cycle and switching rate set by the controller. (3) Rapid current rundown is accomplished by turning both switch arrays "off", allowing load current to be dumped back into the source through the third and fourth diode arrays connecting the source in series opposition with the load to recover energy from the inductive load. The three operating states are controlled automatically by the controller.

  6. A Very Low-Luminosity, Very Cool, DC White Dwarf

    E-Print Network [OSTI]

    Hugh Harris; Conard Dahn; Frederick Vrba; Arne Henden; James Liebert; Gary Schmidt; Neill Reid

    1999-06-03

    The star LHS 3250 is found to be a white dwarf at a distance of 30 pc. Its absolute magnitudes (M_V = 15.72; M_bol = 16.2) put it among the least-luminous white dwarfs known. Its optical spectrum shows no features, indicating it has a DC classification, and it shows no detectable polarization, indicating it does not have a very strong magnetic field. However, its broadband colors show it to have a unique spectral energy distribution, and it stands out from all other stars in BVI and other broadband photometric surveys. We discuss these properties, and conclude that LHS 3250 must be an extremely cool white dwarf with strong collision-induced absorption at red-infrared wavelengths from molecular hydrogen, in accord with models for very cool white dwarf atmospheres. If so, it is the first such star known, and the first star to provide observational evidence supporting these models. It suggests that other very cool white dwarfs, both halo white dwarfs and the oldest disk white dwarfs, also may have colors affected by similar absorption. The atmospheric composition of LHS 3250 is not known, and therefore its temperature is poorly determined. It may be a helium-core star with a mass 0.3-0.45 M_solar and a product of mass-transfer in a close binary system. However, until its temperature is better known, its mass and age remain uncertain.

  7. DC Pro Software Tool Suite, Data Center Fact Sheet, Industrial Technologies Program

    SciTech Connect (OSTI)

    Not Available

    2009-04-01

    This fact sheet describes how DOE's Data Center Energy Profiler (DC Pro) Software Tool Suite and other resources can help U.S. companies identify ways to improve the efficiency of their data centers.

  8. DC-OPF Formulation with Price-Sensitive Demand Bids Junjie Sun and Leigh Tesfatsion

    E-Print Network [OSTI]

    Tesfatsion, Leigh

    DC-OPF Formulation with Price-Sensitive Demand Bids Junjie Sun and Leigh Tesfatsion Last Revised (TNCS) subject to various transmission constraints. As explained at length in Sun and Tesfation (2007

  9. ReHABit : claiming endangered structures in Washington DC to rethink subsidized housing

    E-Print Network [OSTI]

    Fowlkes, Catherine Kuhnle

    2007-01-01

    There is an affordable housing crisis today in Washington D.C. that is the result of a uniquely complicated history of a capital city and a current economic boom. This thesis responds to that crisis by proposing a new ...

  10. Dielectric relaxation and conduction in SrTiO{sub 3} thin films under dc bias

    SciTech Connect (OSTI)

    Ang, Chen; Yu, Zhi; Cross, L. E.; Guo, Ruyan; Bhalla, A. S.

    2001-08-06

    The dielectric and conduction behavior of SrTiO{sub 3} thin films deposited on a SrTiO{sub 3} single-crystal substrate is studied. Without dc bias, an obvious dielectric 'defect mode' in the dielectric loss is observed in the temperature range of {approx}100--200 K; however, no noticeable corresponding dielectric constant peak is observed. By applying a high dc bias ({>=}40 kV/cm), a dielectric constant peak with frequency dispersion appears in the same temperature range, the dielectric loss is increased, and simultaneously high dc conduction is observed. The induced dielectric constant peak is related to dc conduction and attributed to the coupling effect of the mobile carriers with the dielectric defect mode. {copyright} 2001 American Institute of Physics.

  11. DC power transmission from the Leningradskaya Nuclear Power Plant to Vyborg

    SciTech Connect (OSTI)

    Koshcheev, L. A.; Shul'ginov, N. G.

    2011-05-15

    DC power transmission from the Leningradskaya Nuclear Power Plant (LAES) to city of Vyborg is proposed. This will provide a comprehensive solution to several important problems in the development and control of the unified power system (EES) of Russia.

  12. New AC-DC Power Factor Correction Architecture Suitable for High Frequency Operation

    E-Print Network [OSTI]

    Lim, Seungbum

    This paper presents a novel ac-dc power factor correction (PFC) power conversion architecture for single-phase grid interface. The proposed architecture has significant advantages for achieving high efficiency, good power ...

  13. Vehicle Technologies Office Merit Review 2014: High Performance DC Bus Film Capacitor

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation given by GE Global Research at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about high performance DC bus...

  14. Vehicle Technologies Office Merit Review 2015: High Performance DC Bus Film Capacitor

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation given by GE Global Research at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about high performance DC bus...

  15. Multilevel-Dc-Bus Inverter For Providing Sinusoidal And Pwm Electrical Machine Voltages

    DOE Patents [OSTI]

    Su, Gui-Jia [Knoxville, TN

    2005-11-29

    A circuit for controlling an ac machine comprises a full bridge network of commutation switches which are connected to supply current for a corresponding voltage phase to the stator windings, a plurality of diodes, each in parallel connection to a respective one of the commutation switches, a plurality of dc source connections providing a multi-level dc bus for the full bridge network of commutation switches to produce sinusoidal voltages or PWM signals, and a controller connected for control of said dc source connections and said full bridge network of commutation switches to output substantially sinusoidal voltages to the stator windings. With the invention, the number of semiconductor switches is reduced to m+3 for a multi-level dc bus having m levels. A method of machine control is also disclosed.

  16. Development and evaluation of an implantable chronic DC stimulation and measurement probe for nerve regeneration studies 

    E-Print Network [OSTI]

    Macha, Douglas Bryan

    1995-01-01

    isotropic. The actual field strength or current density induced by the applied current is seldom directly measured in-vivo. This research seeks to evaluate the design of an implantable DC stimulator capable of delivering a constant, stable and measurable...

  17. DC Discharge Studies Using PIC-MCC: PIC Simulations Jeff Hammel & John Verboncoeur

    E-Print Network [OSTI]

    Wurtele, Jonathan

    DC Discharge Studies Using PIC-MCC: PIC Simulations Jeff Hammel & John Verboncoeur Electronics PIC Simulations (XPDP1) XPDP1, a 1D-3V PIC-MCC code (Verboncoeur et al., 1993), was used to simu- late

  18. Modeling of D/C motor driven synthetic jet acutators for flow separation control 

    E-Print Network [OSTI]

    Balasubramanian, Ashwin Kumar

    2004-11-15

    The objective of this research is to present a theoretical study of the compressibility effects on the performance of an electric D/C motor driven synthetic jet actuator for flow separation control. Hot wire anemometer experiments were conducted...

  19. Low speed control of a DC motor driving a mechanical system with fuzzy adaptive compensation 

    E-Print Network [OSTI]

    Hyun, Dongyoon

    1997-01-01

    A fuzzy adaptive feedforward control scheme in conjunction with classical feedback control is proposed for the low speed control of DC motors driving mechanical systems in the presence of friction. In the fuzzy adaptive scheme, a fuzzy logic based...

  20. Grid Modernization Highlighted in Washington DC in September with the Solar Decathlon

    Broader source: Energy.gov [DOE]

    Smart Grid is on display at the U.S. Department of Energy 2011 Solar Decathlon, held September 23 through October 2 on the National Mall, West Potomac Park, Washington, DC.  The decathlon...

  1. Area Efficient D/A Converters For Accurate DC Operation Brandon Royce Greenley

    E-Print Network [OSTI]

    Moon, Un-Ku

    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 6.2 Mismatch Modeling For Area Optimization . . . . . . . . . . . . . . . . . . . . . . . 51 6Area Efficient D/A Converters For Accurate DC Operation by Brandon Royce Greenley A THESIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 5.1 Measurement Setup

  2. Assessment of Soil Erosion at a DC Park Facility Spring Valley Park

    E-Print Network [OSTI]

    District of Columbia, University of the

    park for the pilot assessment study. Failure to control erosion caused by the runoff of rain water can of Columbia Date: May 2005 Prepared for the DC Water Resources Research Institute Funded by USGS through

  3. Gaseous and particulate emissions from a DC arc melter

    SciTech Connect (OSTI)

    Overcamp, T.J.; Speer, M.P.; Griner, S.J.; Cash, D.M. [Clemson Univ., Anderson, SC (United States)

    1997-12-31

    This paper presents the results of the gaseous and particulate emissions from eight experimental tests of a DC arc melter to treat simulated Savannah River soils contaminated with metals, surrogates for radionuclides, and organic debris. The gaseous analyses reported on the concentrations of oxygen, hydrogen, carbon monoxide, carbon dioxide, hydrogen, methane, nitric oxide, and nitrogen dioxide. The carbon dioxide concentration was high for all runs. For the runs with an air purge, the carbon monoxide concentration ranged up to 10% in the runs with the debris and 2% in the runs without debris. Hydrogen ranged up to 5% by with debris and up to 1% without debris. The methane concentration ranged up to 7,000 ppm{sub v} for the runs with debris and 2,000 ppm for the runs without debris. With a nitrogen purge, oxygen concentrations were less than 1%. The carbon dioxide concentrations ranged from 3 to 15%. Much of this carbon dioxide was probably due the carbonates added to the feed material. The carbon monoxide concentration ranged up to 20% with the debris and 7% without debris. Hydrogen was above 6% in with debris and up to 6% without debris. The methane concentration ranged up to 10,000 ppm{sub v} with debris and 4,000 ppm{sub v} without debris. The particulate concentrations exiting ranged from 32 to 145 g/m{sup 3}. From the chemical analyses, the primary elements were silicon and calcium. The CHN analyses indicated that carbon, probably as carbonates, are an additional component in the particulate matter. The estimated emissions were at a level of 3% or less for cerium, up to 7% for nickel, and 11 to 30% for cesium.

  4. Abstract--A novel control scheme for improving the power efficiency of low-voltage DC-DC converters for battery-powered,

    E-Print Network [OSTI]

    Rincon-Mora, Gabriel A.

    -DC converters for battery-powered, portable applications is presented. In such applications, light- load efficiency is crucial for extending battery life, since mobile devices operate in stand-by mode for most-of-the-art techniques. As a result, the battery life in a typical DSP microprocessor application is improved by 7

  5. Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings

    SciTech Connect (OSTI)

    Garbesi, Karina; Vossos, Vagelis; Sanstad, Alan; Burch, Gabriel

    2011-10-13

    An increasing number of energy efficient appliances operate on direct current (DC) internally, offering the potential to use DC from renewable energy systems directly and avoiding the losses inherent in converting power to alternating current (AC) and back. This paper investigates that potential for net-metered residences with on-site photovoltaics (PV) by modeling the net power draw of the ‘direct-DC house’ with respect to today’s typical configuration, assuming identical DC-internal loads. Power draws were modeled for houses in 14 U.S. cities, using hourly, simulated PV-system output and residential loads. The latter were adjusted to reflect a 33% load reduction, representative of the most efficient DC-internal technology, based on an analysis of 32 electricity end-uses. The model tested the effect of climate, electric vehicle (EV) loads, electricity storage, and load shifting on electricity savings; a sensitivity analysis was conducted to determine how future changes in the efficiencies of power system components might affect savings potential. Based on this work, we estimate that net-metered PV residences could save 5% of their total electricity load for houses without storage and 14% for houses with storage. Based on residential PV penetration projections for year 2035 obtained from the National Energy Modeling System (2.7% for the reference case and 11.2% for the extended policy case), direct-DC could save the nation 10 trillion Btu (without storage) or 40 trillion Btu (with storage). Shifting the cooling load by two hours earlier in the day (pre-cooling) has negligible benefits for energy savings. Direct-DC provides no energy savings benefits for EV charging, to the extent that charging occurs at night. However, if charging occurred during the day, for example with employees charging while at work, the benefits would be large. Direct-DC energy savings are sensitive to power system and appliance conversion efficiencies but are not significantly influenced by climate. While direct-DC for residential applications will most likely arise as a spin-off of developments in the commercial sector—because of lower barriers to market entry and larger energy benefits resulting from the higher coincidence between load and insolation—this paper demonstrates that there are substantial benefits in the residential sector as well. Among residential applications, space cooling derives the largest energy savings from being delivered by a direct-DC system. It is the largest load for the average residence on a national basis and is particularly so in high-load regions. It is also the load with highest solar coincidence.

  6. One-dimensional hybrid simulation of the dc/RF combined driven capacitively coupled CF{sub 4} plasmas

    SciTech Connect (OSTI)

    Wang Shuai [School of Science, Northeastern University, Shenyang 110891 (China); Xu Xiang; Wang Younian [School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian 116024 (China)

    2012-11-15

    We developed a one-dimensional hybrid model to simulate the dc/RF combined driven capacitively coupled plasma for CF{sub 4} discharges. The numerical results show the influence of the dc source on the plasma density distribution, ion energy distributions (IEDs), and ion angle distributions (IADs) on both RF and dc electrodes. The increase of dc voltage impels more ions with high energy to the electrode applied to the dc source, which makes the IEDs at the dc electrode shift toward higher energy and the peaks in IADs shift toward the small angle region. At the same time, it also decreases ion-energy at the RF electrode and enlarges the ion-angles which strike the RF electrode.

  7. Performance Study of K2CsSb Photocathode inside a DC High Voltage Gun

    SciTech Connect (OSTI)

    T. Rao, J. Smedley, J.M. Grames, R. Mammei, J.L. McCarter, M. Poelker, R. Suleiman

    2011-03-01

    In the past decade, there has been considerable interest in the generation of tens of mA average current in a photoinjector. Until recently, GaAs:Cs cathodes and K2CsSb cathodes have been tested successfully in DC and RF injectors respectively for this application. Our goal is to test the GaAs:Cs in RF injector and the K2CsSb cathode in the DC gun in order to widen our choices. Since the multialkali cathode is a compound with uniform stochiometry over its entire thickness, we anticipate that the life time issues seen in GaAs:Cs due surface damage by ion bombardment would be minimized with this material. Hence successful operation of the K2CsSb cathode in DC gun could lead to a relatively robust electron source capable of delivering ampere level currents. In order to test the performance of K2CsSb cathode in a DC gun, we have designed and built a load lock system that would allow the fabrication of the cathode at BNL and its testing at JLab. In this paper, we will present the design of the load-lock system, cathode fabrication, and the cathode performance in the preparation chamber and in the DC gun.

  8. Performance Study of K2CsSb Photocathode Inside a DC High Voltage Gun

    SciTech Connect (OSTI)

    McCarter J. L.; Rao T.; Smedley, J.; Grames, J.; Mammei, R.; Poelker, M.; Suleiman, R.

    2011-09-01

    In the past decade, there has been considerable interest in the generation of tens of mA average current in a photoinjector. Until recently, GaAs:Cs cathodes and K{sub 2}CsSb cathodes have been tested successfully in DC and RF injectors respectively for this application. Our goal is to test the K{sub 2}CsSb photocathode inside a DC gun. Since the multialkali cathode is a compound with constant characteristics over its entire thickness, we anticipate that the lifetime issues seen in GaAs:Cs due to surface damage by ion bombardment would be minimized. Hence successful operation of the K{sub 2}CsSb cathode in a DC gun could lead to a relatively robust electron source capable of delivering ampere level currents. In order to test the performance of a K{sub 2}CsSb cathode in a DC gun, we have designed and built a load lock system that allows the fabrication of the cathode at Brookhaven National Lab (BNL) and its testing at Jefferson Lab (JLab). In this paper, we will present the performance of the K{sub 2}CsSb photocathode in the preparation chamber and in the DC gun.

  9. Dynamic magnetization states of a spin valve in the presence of dc and ac currents: Synchronization, modification, and chaos

    E-Print Network [OSTI]

    Li, Charles

    Dynamic magnetization states of a spin valve in the presence of dc and ac currents: Synchronization and numerical calculations of dynamic magnetization states of a spin valve in the presence of dc and ac currents are expected to appear. In this paper, we consider a simple spin valve as a model system to study the problem

  10. Abstract--Environmentally friendly technologies such as photovoltaics and fuel cells are DC sources. In the current power

    E-Print Network [OSTI]

    Tolbert, Leon M.

    Abstract--Environmentally friendly technologies such as photovoltaics and fuel cells are DC sources in pollution [1]. The most well-known green technologies include photovoltaics and wind turbines. Although fuel, fuel cells and photovoltaics, produce direct current (DC). Currently, power system infrastructures

  11. Superconductivity for Electric Systems Annual Peer Review Washington, DC July 27-29, 2004. OAK RIDGE NATIONAL LABORATORY

    E-Print Network [OSTI]

    Superconductivity for Electric Systems Annual Peer Review Washington, DC ­ July 27-29, 2004. OAK RIDGE NATIONAL LABORATORY U. S. DEPARTMENT OF ENERGY American Superconductor Corporation U. Schoop, M. W&D support #12;Superconductivity for Electric Systems Annual Peer Review Washington, DC ­ July 27-29, 2004

  12. Optimal Demand Response in DC Distribution Networks Hamed Mohsenian-Rad, Member, IEEE and Ali Davoudi, Member, IEEE

    E-Print Network [OSTI]

    Mohsenian-Rad, Hamed

    Optimal Demand Response in DC Distribution Networks Hamed Mohsenian-Rad, Member, IEEE and Ali first present an optimization-based foundation for demand response in DC distribution networks. Then, we devise a pricing mechanism to enforce optimal demand response in a distributed fashion. Simulation

  13. Jaworski Liquid metal PSI science and component development FESAC Meeting, Washington DC July 8-10, 2014

    E-Print Network [OSTI]

    Jaworski ­ Liquid metal PSI science and component development ­ FESAC Meeting, Washington DC ­ July 8-10, 2014 Liquid metal plasma-material interaction science and component development MA Jaworski on behalf of the Liquid Metal Plasma-Facing Component working group FESAC Meeting, Washington DC ­ July 8

  14. DC WRRC Report No. 127 GROUND WATER RESOURCE ASSESSMENT STUDY FOR

    E-Print Network [OSTI]

    District of Columbia, University of the

    project: James Collier - DCRA Water Resources Management Division Mohsin Siddique - DCRA Water Quality DRILLING AND FIELD OPERATIONS REPORT FOR THE GROUP B WELLS D.C. WATER RESOURCES RESEARCH CENTER University: Well Drilling and Field Operations Report - Group B Wells DATE: July 1993 AUTHOR(S): Jutta Schneider

  15. Strontium Titanate DC Electric Field Switchable and Tunable Bulk Acoustic Wave Solidly Mounted Resonator

    E-Print Network [OSTI]

    York, Robert A.

    Strontium Titanate DC Electric Field Switchable and Tunable Bulk Acoustic Wave Solidly Mounted.3 0/0. Index Terms - Acoustic resonators, bulk acoustic wave devices, delay filters, ferroelectric,4] that can be exploited to realize voltage-switchable bulk-acoustic wave (BAW) devices for RF applications [5

  16. dc electric field tunable bulk acoustic wave solidly mounted resonator using SrTiO3

    E-Print Network [OSTI]

    York, Robert A.

    dc electric field tunable bulk acoustic wave solidly mounted resonator using SrTiO3 G. N. SaddikTiO3 solidly mounted bulk acoustic wave resonator has been designed, fabricated, and tested of Physics. DOI: 10.1063/1.2759464 Thin film bulk acoustic wave resonators FBARs have been in use by research

  17. SEC Training -Risk Management Washington, D.C., February 27, 2006

    E-Print Network [OSTI]

    Frey, Robert J.

    SEC Training - Risk Management Washington, D.C., February 27, 2006 Robert J. Frey, Ph.D. Director Managers, pp. IV-3 to IV-9 · Market Risk · Liquidity Risk · Credit Risk · Leverage Risk · Operational Risk · Valuation Risk 10 #12;Monitoring Risk Source: MFA's 2005 Sound Practices for Hedge Fund Managers, pp. AI-1

  18. DC 20 a,f,g AXISYMMETRIC INSTABILITY IN A NONCIRCDLAR TOKAMAK

    E-Print Network [OSTI]

    Sprott, Julien Clinton

    DC 20 a,f,g AXISYMMETRIC INSTABILITY IN A NONCIRCDLAR TOKAMAK: EXPERIMENT AND THEORY BY B, a tokamak with a four-null poloidal divertor. Experi mental results are clo sely compared with stability indicates #12;AXISYMMETRIC INSTABILITY IN A NONCIRCULAR TOKAMAK: EXPERIMENT AND THEORY by B. Lipschultz

  19. Design and Verification of Smart and Scalable DC Microgrids for Emerging Regions

    E-Print Network [OSTI]

    Sanders, Seth

    in grid power: A droop voltage power-sharing scheme is implemented, wherein the microgrid voltage droops transmission and distributed storage. Since the PMUs will be able to communicate digitally to the power stationDesign and Verification of Smart and Scalable DC Microgrids for Emerging Regions P. Achintya

  20. February 2012 Did you know that the Navy Memorial in Washington D.C. is

    E-Print Network [OSTI]

    February 2012 004/12 Did you know that the Navy Memorial in Washington D.C. is is honoring all://navymemorial.org/yotc/Home/tabid/224/Default.aspx Challenge to all: in the Navy Log. This is your free opportunity to be entered and activities occurring across our Navy to support YOTC through this Facebook page: http

  1. November 2002 15th TOFE, Washington, D.C. 1 Thermal Behavior and Operating

    E-Print Network [OSTI]

    Raffray, A. René

    - Enthalpy transfer - Condensation (latent heat transfer) in the case of gas with boiling point and melting of condensation. - Latent heats have only a small effect on the overall energy transfer which is governed, Washington, D.C. 7 Radiation Heat Transfer from Chamber Wall · Simple estimate given by: Where: Tw

  2. IEEE Photovoltaic Specialists Conference Washington, D.C., May 13-17, 1996

    E-Print Network [OSTI]

    Perez, Richard R.

    IEEE Photovoltaic Specialists Conference Washington, D.C., May 13-17, 1996 NICHE MARKETS FOR GRID-CONNECTED PHOTOVOLTAICS Howard Wenger Pacific Energy Group Walnut Creek, CA, USA Christy Herig & Roger Taylor National- Sited Photovoltaics (CSPV) in the United States. 1 The intent is to demonstrate markets that are cost

  3. IMPLEMENTATION OF A DC BUMP AT THE STORAGE RING INJECTION STRAIGHT SECTION

    SciTech Connect (OSTI)

    Wang, G.M.; Shaftan, T.; Kramer, S.K.; Fliller, R.; Guo, W.; Heese, R.; Yu, L.H.; Parker, B.; Willeke, F.J.

    2011-03-28

    The NSLS II beam injection works with a DC septum, a pulsed septum and four fast kicker magnets. The kicker power supplies each produce a two revolution period pulsed field, 5.2 {micro}s half sine waveform, using {approx}5kA drive voltage. The corresponding close orbit bump amplitude is {approx}15mm. It is desired that the bump is transparent to the users for top-off injection. However, high voltage and short pulse power supplies have challenges to maintain pulse-to-pulse stability and magnet-to-magnet reproducibility. To minimize these issues, we propose implementing a DC local bump on top of the fast bump to reduce the fast kicker strength by a factor of 2/3. This bump uses two storage ring corrector magnets plus one additional magnet at the septum to create a local bump. Additionally, these magnets could provide a DC bump to simulate the septum position effects on the store beam lifetime. This paper presents the detail design of this DC injection bump and related beam dynamics.

  4. Diagnostics of ballistic electrons in a dc/rf hybrid capacitively coupled discharge

    E-Print Network [OSTI]

    Economou, Demetre J.

    Diagnostics of ballistic electrons in a dc/rf hybrid capacitively coupled discharge Lin Xu,1,a Lee the substrate electrode or the semiconduc- tor wafer. Watanabe et al.7 superimposed a high energy electron beam. Economou,2,c and Vincent M. Donnelly2,d 1 Tokyo Electron America, Austin, Texas 78741, USA 2 Department

  5. The ecological causes of evolution Andrew D.C. MacColl

    E-Print Network [OSTI]

    Obbard, Darren

    The ecological causes of evolution Andrew D.C. MacColl School of Biology, University of Nottingham, but it is not the cause of evolution. The cause of natural selection and, therefore, of adaptive evolution, is any of species and their response to environmental change. What causes natural selection? When one contemplates

  6. 1. PMU Based RAS for a Hybrid AC/DC System 1.1. Project Team

    E-Print Network [OSTI]

    Li, Husheng

    1. PMU Based RAS for a Hybrid AC/DC System 1.1. Project Team Primary Thrust: Modeling Secondary to be detected more quickly allowing less severe action. This effort focuses on PMU driven response-based RAS from PMU units. The project goals break down into three efforts: · Investigating the possibility

  7. Living downtown in Washington, D.C. : defining residential community in the city center

    E-Print Network [OSTI]

    Allen, Robin P. (Robin Porter)

    1995-01-01

    In Washington D.C., as in many other American cities, a significant section of the downtown is distinguished by boarded-up buildings and vacant lots. In spite of traces of a city plan that could organize and accommodate a ...

  8. Chapter 6.7 Edwards Auto 306 DC and RF Sputter Coater

    E-Print Network [OSTI]

    Healy, Kevin Edward

    mechanical pump is installed for rough pumping and one turbo pump for fine pumping. A crystal monitor on it to assure good seal of the chamber. 4.2 Control Panel: Allows you to vent and pump the chamber. 4.3 DC power over 30 years of your career. 5.4 Wear light blue vacuum gloves when you handle components

  9. CTMCONTROL: Addressing the MC/DC Objective for Safety-Critical Automotive Software

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    , testing, MC/DC, ISO 26262, AUTOSAR. 1 INTRODUCTION ISO 26262 [1] is one of the main points of reference-critical software. AUTOSAR, since release 4.0 in 2011 [2], refers to the demands of ISO 26262 for safety A (most critical) software for airborne systems before they can receive an official approval/certification

  10. DC Discharge Studies Using PIC-MCC: Unmagnetized Glow Discharge Theory Jeff Hammel & John Verboncoeur

    E-Print Network [OSTI]

    Wurtele, Jonathan

    DC Discharge Studies Using PIC-MCC: Unmagnetized Glow Discharge Theory Jeff Hammel & John Wiley and Sons, Inc., New York, 1994. · Leonard B. Loeb. Fundamental Processes of Electrical Discharge. Verboncoeur, A. B. Langdon, and N. T. Gladd. An object-oriented electromagnetic pic code. Computer Physics

  11. Use of Facility Contractor Employees for Services to DOE in the Washington, D.C., Area

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-07-12

    To clarify and modify policies and procedures for management of Department of Energy (DOE), including National Nuclear Security Administration (NNSA), facility contractor employees located in the Washington, D.C., area. Cancels DOE N 350.5. Certified 12-28-06. Canceled by DOE O 350.2A.

  12. Bi-directional Current-fed Medium Frequency Transformer Isolated AC-DC Converter 

    E-Print Network [OSTI]

    Essakiappan, Somasundaram

    2011-08-08

    demand for power converters with bi-directional capabilities. The objective of this thesis is to develop a high power quality, bi-directional AC-DC power converter that is a solution to the aforementioned problems. This thesis studies an existing topology...

  13. New World Monkeys Alfred L Rosenberger, Smithsonian Institution, Washington DC, USA

    E-Print Network [OSTI]

    Rosenberger, Alfred H.

    New World Monkeys Alfred L Rosenberger, Smithsonian Institution, Washington DC, USA Walter Carl Hartwig,Touro University College of Osteopathic Medicine, Vallejo, California, USA New World monkeys are the living (nonhuman) primates of South and Central America. Introduction New World monkeys are distributed

  14. New Global Alliance Formed to Undercut Illegal WASHINGTON, DC, May 26, 2010 (ENS) -To reduce trade

    E-Print Network [OSTI]

    New Global Alliance Formed to Undercut Illegal Logging WASHINGTON, DC, May 26, 2010 (ENS with a stake in promoting legal forest product supply chains. The Forest Legality Alliance aims to achieve products and increasing the capacity of suppliers to deliver legal wood and paper. "The Alliance seeks

  15. Joint two-dimensional DC resistivity and seismic travel time inversion with cross-gradients constraints

    E-Print Network [OSTI]

    Meju, Max

    Joint two-dimensional DC resistivity and seismic travel time inversion with cross to evaluate the structural features common to both methods. The cross-gradients function is incorporated method. The resultant iterative two-dimensional (2-D) joint inversion scheme is successfully applied

  16. Operation of the DC current transformer intensity monitors at FNAL during run II

    SciTech Connect (OSTI)

    Crisp, J.; Fellenz, B.; Heikkinen, D.; Ibrahim, M.A.; Meyer, T.; Vogel, G.; /Fermilab

    2012-01-01

    Circulating beam intensity measurements at FNAL are provided by five DC current transformers (DCCT), one per machine. With the exception of the DCCT in the Recycler, all DCCT systems were designed and built at FNAL. This paper presents an overview of both DCCT systems, including the sensor, the electronics, and the front-end instrumentation software, as well as their performance during Run II.

  17. Control of a Fuel-Cell Powered DC Electric Vehicle Motor Federico Zenith

    E-Print Network [OSTI]

    Skogestad, Sigurd

    Control of a Fuel-Cell Powered DC Electric Vehicle Motor Federico Zenith Sigurd Skogestad Introduction Research in fuel cells receives currently a lot of interest. Fuel cells can be used, in different. However, the dynamics of fuel cells has received comparatively less attention. Control of fuel cells

  18. Navier-Stokes on Black Hole Horizons and DC Thermoelectric Conductivity

    E-Print Network [OSTI]

    Aristomenis Donos; Jerome P. Gauntlett

    2015-11-12

    Within the context of the AdS/CFT correspondence we show that the DC thermoelectric conductivity can be obtained by solving the linearised, time-independent and forced Navier-Stokes equations on the black hole horizon for an incompressible and charged fluid.

  19. Navier-Stokes on Black Hole Horizons and DC Thermoelectric Conductivity

    E-Print Network [OSTI]

    Donos, Aristomenis

    2015-01-01

    We consider a general class of black hole solutions of Einstein-Maxwell theory which are holographically dual to CFTs with spatially dependent sources. We show that an averaged DC thermoelectric conductivity matrix can be obtained by solving the forced, linearised, time-independent Navier-Stokes equations on the black hole horizon for an incompressible and charged fluid.

  20. Faculty of Health Sciences MPH Program Policies and Procedures

    E-Print Network [OSTI]

    Shihadeh, Alan

    region (Algeria, Bahrain, Comoros, Djibouti, Egypt, Iraq, Jordan, Kuwait, Lebanon, Libya Arab Jamahiriya

  1. Mentoring and Diversity Sharon L Youmans, Pharm D, MPH

    E-Print Network [OSTI]

    Mullins, Dyche

    origin. Unconscious Bias - social stereotypes about certain demographics or Groups of people be difficult because of negative stereotypes, difficulty with identification and role modeling, skepticism Business Review, 2001 13 #12;Unconscious Bias The Implicit Association Test IAT consistently demonstrates

  2. Concurrent Single-Executable CCSM with MPH Library

    E-Print Network [OSTI]

    He, Yun; Ding, Chris H.Q.

    2006-01-01

    Journal of High Performance Computing Applications, Vol.19,Journal of High Performance Computing Applications, Vol.19,Journal of High Performance Computing Applications, Vol.19,

  3. The GeorGe WashinGTon UniversiTy | WashinGTon DC The Elliott School's M.A. program in International Affairs

    E-Print Network [OSTI]

    Larsen, Mike

    The GeorGe WashinGTon UniversiTy | WashinGTon DC Overview The Elliott School's M.A. program affairs. Students can take advantage of numerous internship opportunities in the Washington, DC, area to pursue daytime internships in the Washington, DC, metropolitan area. Master of arts in international

  4. DRAFT of Klahr, D. (2012) Patterns, Rules, & Discoveries in Life and in Science. In Carver, S., & Shrager, J..(Eds.) The Journey From Child to Scientist: Integrating Cognitive Development and the Education Sciences. Washington DC: American Psychological A

    E-Print Network [OSTI]

    Klahr, David

    2012-01-01

    Development and the Education Sciences. Washington DC: American Psychological Association 2 ingenious and the Education Sciences. Washington DC: American Psychological Association 1 Patterns, Rules, & Discoveries

  5. Quantum Oscillator on $\\DC P^n$ in a constant magnetic field

    E-Print Network [OSTI]

    Stefano Bellucci; Armen Nersessian; Armen Yeranyan

    2004-06-22

    We construct the quantum oscillator interacting with a constant magnetic field on complex projective spaces $\\DC P^N$, as well as on their non-compact counterparts, i. e. the $N-$dimensional Lobachewski spaces ${\\cal L}_N$. We find the spectrum of this system and the complete basis of wavefunctions. Surprisingly, the inclusion of a magnetic field does not yield any qualitative change in the energy spectrum. For $N>1$ the magnetic field does not break the superintegrability of the system, whereas for N=1 it preserves the exact solvability of the system. We extend this results to the cones constructed over $\\DC P^N$ and ${\\cal L}_N$, and perform the (Kustaanheimo-Stiefel) transformation of these systems to the three-dimensional Coulomb-like systems.

  6. Demonstration of Cathode Emittance Dominated High Bunch Charge Beams in a DC gun-based Photoinjector

    E-Print Network [OSTI]

    Gulliford, Colwyn; Bazarov, Ivan; Dunham, Bruce; Cultrera, Luca

    2015-01-01

    We present the results of transverse emittance and longitudinal current profile measurements of high bunch charge (greater than or equal to 100 pC) beams produced in the DC gun-based Cornell Energy Recovery Linac Photoinjector. In particular, we show that the cathode thermal and core beam emittances dominate the final 95% and core emittance measured at 9-9.5 MeV. Additionally, we demonstrate excellent agreement between optimized 3D space charge simulations and measurement, and show that the quality of the transverse laser distribution limits the optimal simulated and measured emittances. These results, previously thought achievable only with RF guns, demonstrate that DC gun based photoinjectors are capable of delivering beams with sufficient single bunch charge and beam quality suitable for many current and next generation accelerator projects such as Energy Recovery Linacs (ERLs) and Free Electron Lasers (FELs).

  7. Metastability in a nano-bridge based hysteretic DC-SQUID embedded in superconducting microwave resonator

    E-Print Network [OSTI]

    Eran Segev; Oren Suchoi; Oleg Shtempluck; Fei Xue; Eyal Buks

    2010-07-29

    We study the metastable response of a highly hysteretic DC-SQUID made of a Niobium loop interrupted by two nano-bridges. We excite the SQUID with an alternating current and with direct magnetic flux, and find different stability zones forming diamond-like structures in the measured voltage across the SQUID. When such a SQUID is embedded in a transmission line resonator similar diamond structures are observed in the reflection pattern of the resonator. We have calculated the DC-SQUID stability diagram in the plane of the exciting control parameters, both analytically and numerically. In addition, we have obtained numerical simulations of the SQUID equations of motion, taking into account temperature variations and non-sinusoidal current-phase relation of the nano-bridges. Good agreement is found between experimental and theoretical results.

  8. Demonstration of cathode emittance dominated high bunch charge beams in a DC gun-based photoinjector

    SciTech Connect (OSTI)

    Gulliford, Colwyn Bartnik, Adam Bazarov, Ivan; Dunham, Bruce; Cultrera, Luca

    2015-03-02

    We present the results of transverse emittance and longitudinal current profile measurements of high bunch charge (?100 pC) beams produced in the DC gun-based Cornell energy recovery linac photoinjector. In particular, we show that the cathode thermal and core beam emittances dominate the final 95% and core emittances measured at 9–9.5?MeV. Additionally, we demonstrate excellent agreement between optimized 3D space charge simulations and measurement, and show that the quality of the transverse laser distribution limits the optimal simulated and measured emittances. These results, previously thought achievable only with RF guns, demonstrate that DC gun based photoinjectors are capable of delivering beams with sufficient single bunch charge and beam quality suitable for many current and next generation accelerator projects such as Energy Recovery Linacs and Free Electron Lasers.

  9. Effect of alkali addition on DC conductivity and thermal properties of vanadium-bismo-borate glasses

    SciTech Connect (OSTI)

    Khasa, S., E-mail: skhasa@rediff.com; Dahiya, M. S., E-mail: skhasa@rediff.com [Physics Department, Deenbandhu Chhotu Ram University of Science and Technology, Murthal-131039 (India); Agarwal, A. [Physics Department, Guru Jambheshwara University of Science and Technology, Hisar-125001 (India)

    2014-04-24

    The DC Conductivity and Differential Thermal Analysis of glasses with composition (30?x)Li{sub 2}O?xV{sub 2}O{sub 5}?20Bi{sub 2}O{sub 3}?50B{sub 2}O{sub 3}(x=15, 10, 5) has been carried out in order to study the effect of replacing the Transition Metal Oxide (TMO) with alkali oxide. A significant increase in the DC conductivity has been observed with increase in alkali content. Again the thermal measurements have shown the decrease in both glass transition temperature (T{sub g}) and crystallization temperature (T{sub x}). The Glass Stability (GS) and Glass Forming Ability (GFA) have also been calculated and these also were found to decrease with increase in alkali oxide content at the cost of TMO.

  10. Time series analysis of ionization waves in dc neon glow discharge

    SciTech Connect (OSTI)

    Hassouba, M. A.; Al-Naggar, H. I.; Al-Naggar, N. M.; Wilke, C. [Department of Physics, Faculty of Science, Benha University (Egypt); Institute of Physics, E. M. A. University, Domstrasse 10a, 17489 Greifswald (Germany)

    2006-07-15

    The dynamics of dc neon glow discharge is examined by calculating a Lyapunov exponent spectrum (LES) and correlation dimension (D{sub corr}) from experimental time series. The embedding theory is used to reconstruct an attractor with the delay coordinate method. The analysis refers to periodic, chaotic, and quasi-periodic attractors. The results obtained are confirmed by a comparison with other methods of time series analysis such as the Fourier power spectrum and autocorrelation function. The main object of the present work is the positive column of a dc neon glow discharge. The positive column is an excellent model for the study of a non-linearity plasma system because it is nonisothermal plasma far from equilibrium.

  11. Ions in solution: Density corrected density functional theory (DC-DFT)

    SciTech Connect (OSTI)

    Kim, Min-Cheol; Sim, Eunji; Burke, Kieron

    2014-05-14

    Standard density functional approximations often give questionable results for odd-electron radical complexes, with the error typically attributed to self-interaction. In density corrected density functional theory (DC-DFT), certain classes of density functional theory calculations are significantly improved by using densities more accurate than the self-consistent densities. We discuss how to identify such cases, and how DC-DFT applies more generally. To illustrate, we calculate potential energy surfaces of HO·Cl{sup ?} and HO·H{sub 2}O complexes using various common approximate functionals, with and without this density correction. Commonly used approximations yield wrongly shaped surfaces and/or incorrect minima when calculated self consistently, while yielding almost identical shapes and minima when density corrected. This improvement is retained even in the presence of implicit solvent.

  12. Method of measuring the dc electric field and other tokamak parameters

    DOE Patents [OSTI]

    Fisch, Nathaniel J. (Princeton, NJ); Kirtz, Arnold H. (Princeton Junction, NJ)

    1992-01-01

    A method including externally imposing an impulsive momentum-space flux to perturb hot tokamak electrons thereby producing a transient synchrotron radiation signal, in frequency-time space, and the inference, using very fast algorithms, of plasma parameters including the effective ion charge state Z.sub.eff, the direction of the magnetic field, and the position and width in velocity space of the impulsive momentum-space flux, and, in particular, the dc toroidal electric field.

  13. Design, Packaging, and Architectural Policy Co-optimization for DC Power Integrity in 3D DRAM

    E-Print Network [OSTI]

    Lim, Sung Kyu

    -domain CAD/architectural platform that addresses DC power noise issues in 3D DRAM targeting stacked DDR3) Interposer Figure 1: Default configurations of four 3D DRAM designs. (a) on-chip stacked DDR3, (b) off-chip stacked DDR3, (c) Wide I/O, and (d) HMC. are used in a stacked DDR3 design [2] to reduce power noise. Sub

  14. Analogue Hawking Radiation in a dc-SQUID Array Transmission Line

    E-Print Network [OSTI]

    P. D. Nation; M. P. Blencowe; A. J. Rimberg; E. Buks

    2009-08-01

    We propose the use of a superconducting waveguide formed from an array of dc-SQUID's for investigating analogue Hawking radiation. Biasing the array with a space-time varying flux modifies the propagation velocity of the waveguide, leading to an effective metric with an horizon. Being a fundamentally quantum mechanical device, this setup allows for investigations of quantum effects such as back-reaction and analogue space-time fluctuations on the Hawking process.

  15. Method and apparatus for generating radiation utilizing DC to AC conversion with a conductive front

    DOE Patents [OSTI]

    Dawson, John M. (Pacific Palisades, CA); Mori, Warren B. (Hermosa Beach, CA); Lai, Chih-Hsiang (So. Pasadena, CA); Katsouleas, Thomas C. (Malibu, CA)

    1998-01-01

    Method and apparatus for generating radiation of high power, variable duration and broad tunability over several orders of magnitude from a laser-ionized gas-filled capacitor array. The method and apparatus convert a DC electric field pattern into a coherent electromagnetic wave train when a relativistic ionization front passes between the capacitor plates. The frequency and duration of the radiation is controlled by the gas pressure and capacitor spacing.

  16. 1D AND 2D PIC-MCC SIMULATIONS OF DC DISCHARGES BETWEEN PLANAR ELECTRODES

    E-Print Network [OSTI]

    Wurtele, Jonathan

    1D AND 2D PIC-MCC SIMULATIONS OF DC DISCHARGES BETWEEN PLANAR ELECTRODES Verboncoeur, JV, Hammel in argon and helium (p = 0.1 - 1 Torr; I = 10-6 - 10-2 A) have been simulated using the PIC-MCC methedology using 1d-3v and 2d-3v models. The theory for glow discharges is presented. PIC results are analyzed

  17. VUV generation by adiabatically expanded and excited by a DC electrical discharge Argon gas

    SciTech Connect (OSTI)

    Pipergias, K.; Yasemidis, D.; Reppa, E.; Pentaris, D.; Efthimiopoulos, T.; Merlemis, N.; Giannetas, V.

    2010-11-10

    We investigate the emission of Argon (Ar) gas which is adiabatically expanded through a nozzle and excited using a DC electrical discharge. Because of the expansion and the electronic excitation, Ar dimers and clusters are formed, which give radiation in the second (2nd) and in the third (3rd) continua of Ar, centered at about 126 and 254 nm respectively. We particularly focus our study on the 2nd continuum, in order to develop a laser at this wavelength.

  18. Ultraviolet and electron irradiation of DC-704 siloxane oil in zinc orthotitanate paint

    SciTech Connect (OSTI)

    Mossman, D.L.; Barsh, M.K.; Greenberg, S.A.

    1982-01-01

    Discrepancies exist between accelerated laboratory simulation and geosynchronous orbit flight data for zinc orthotitanate (ZOT) paint degradation. The effects of ultraviolet and electron irradiation on ZOT contaminated with DC-704 silicone oil are reported. In-situ solar absorptance and emittance changes for contaminated and clean specimens are discussed with reference to post-test surface morphology, determined by scanning electron microscope analysis. Features of the contaminated ZOT degradation kinetics correlate with orbital performance.

  19. Comparative Study of DC and AC Microgrids in Commercial Buildings Across Different Climates and Operating Profiles: Preprint

    SciTech Connect (OSTI)

    Fregosi, D.; Ravula, S.; Brhlik, D.; Saussele, J.; Frank, S.; Bonnema, E.; Scheib, J.; Wilson, E.

    2015-04-22

    Bosch has developed and demonstrated a novel DC microgrid system designed to maximize utilization efficiency for locally generated photovoltaic energy while offering high reliability, safety, redundancy, and reduced cost compared to equivalent AC systems. Several demonstration projects validating the system feasibility and expected efficiency gains have been completed and additional ones are in progress. This work gives an overview of the Bosch DC microgrid system and presents key results from a large simulation study done to estimate the energy savings of the Bosch DC microgrid over conventional AC systems. The study examined the system performance in locations across the United States for several commercial building types and operating profiles and found that the Bosch DC microgrid uses generated PV energy 6%–8% more efficiently than traditional AC systems.

  20. The design of a hybrid DC motor/SMA actuated robotic hand based on physiological and anatomical synergies

    E-Print Network [OSTI]

    Rosmarin, Josiah Benjamin

    2008-01-01

    A new approach to the design and control of multi-fingered hands using hybrid DC motor-Shape Memory Alloy (SMA) array actuators is presented in this thesis. The fundamental design concept is based on the principle of motor ...

  1. Data:12a45141-7972-4ec8-a2dc-37fedc8133d3 | Open Energy Information

    Open Energy Info (EERE)

    ec8-a2dc-37fedc8133d3 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic...

  2. Data:7a23ab07-5468-48dc-947a-679327ca61e0 | Open Energy Information

    Open Energy Info (EERE)

    dc-947a-679327ca61e0 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic...

  3. Design and performance evaluation of an electric go-kart and custom permanent magnet brushless DC motor

    E-Print Network [OSTI]

    Davis, Eli Marc

    2012-01-01

    This undergraduate thesis documents the design considerations and specifications of building a personal battery-powered go-kart. This includes designing and building a custom brushless DC motor for use in the drivetrain. ...

  4. A Generalized Class of Stationary Frame-Current Controllers for Grid-Connected AC–DC Converters

    E-Print Network [OSTI]

    Hwang, J. George

    Within power systems, high-power pulsewidth-modulated ac-dc converters are used in flexible ac transmission systems controllers and for interfacing renewable energy sources to the grid. These converters traditionally ...

  5. Residential Energy Efficiency Research Planning Meeting Summary Report: Washington, D.C. - October 27-28, 2011

    SciTech Connect (OSTI)

    Not Available

    2012-02-01

    This report summarizes key findings and outcomes from the U.S. Department of Energy's Building America Residential Energy Efficiency Research Planning meeting, held on October 28-29, 2011, in Washington, D.C.

  6. The District Emancipation Act and Its Effects on Washington, DC during the Civil War Brittany Jones & Dr. Kenneth Winkle

    E-Print Network [OSTI]

    Farritor, Shane

    but equal rhetoric Opinions & Outcomes: African Americans · Congressional Globe, 37 Congress, 2 session the smuggling of slaves out of DC · African American testimony held equal weight to whites · Only granted

  7. Achieving high mobility ZnO:Al at very high growth rates by dc filtered cathodic arc deposition

    E-Print Network [OSTI]

    Mendelsberg, Rueben

    2013-01-01

    scale heating in cathodic arc plasma deposition. Appl. Phys.modest 25-70 A dc. The arc plasma was ?ltered using aenergy of the cathodic arc plasma is utilized for ?lm growth

  8. The Smart Approach to Intelligence:[FINAL Edition] John Deutch. The Washington Post. Washington, D.C.: Sep 9, 2002.

    E-Print Network [OSTI]

    Deutch, John

    The Smart Approach to Intelligence:[FINAL Edition] John Deutch. The Washington Post. Washington, D.C.: Sep 9, 2002. pg. A.17 Full Text (1023 words) Copyright The Washington Post Company Sep 9, 2002 Defense

  9. Quantitative study of macroscopic quantum tunneling in a dc SQUID: A system with two degrees of freedom

    E-Print Network [OSTI]

    Li, Shaoxiong; Yu, Yang; Zhang, Y.; Qiu, W.; Han, Siyuan; Wang, Z.

    2002-08-01

    To test whether the theory of macroscopic quantum tunneling (MQT) is applicable to systems with 2 degrees of freedom, we experimentally investigated the switching current distribution of a dc SQUID. Using sample parameters determined from...

  10. Hardware model of a shipboard zonal electrical distribution system (ZEDS) : alternating current/direct current (AC/DC)

    E-Print Network [OSTI]

    Tidd, Chad N. (Chad Norman)

    2010-01-01

    A hardware model of a shipboard electrical distribution system based on aspects of the DDG 51 Flight IIA, Arleigh Burke class, 60Hz Alternating Current (AC) and the future direct current (DC), zonal electrical distribution ...

  11. Vehicle Technologies Office Merit Review 2014: DC Fast Charging Effects on Battery Life and EVSE Efficiency and Security Testing

    Broader source: Energy.gov [DOE]

    Presentation given by Idaho National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about DC fast charging...

  12. www.sciencemag.org/cgi/content/full/330/6009/1408/DC1 Supporting Online Material for

    E-Print Network [OSTI]

    Cottrell, Garrison W.

    www.sciencemag.org/cgi/content/full/330/6009/1408/DC1 Supporting Online Material for Paradoxical-90% of their free feeding weight, except during recovery from surgery where food was available ad libitum. Water

  13. www.sciencemag.org/cgi/content/full/314/5805/1585/DC1 Supporting Online Material for

    E-Print Network [OSTI]

    Winfree, Erik

    www.sciencemag.org/cgi/content/full/314/5805/1585/DC1 Supporting Online Material for Enzyme solutions were prepared at a concentration of 50 µM in ultra pure water (purified by a Milli-Q system

  14. Technical Report for the MVB (MSW & Biomass) Waste to Energy Plants and the AVG Hazardous WTE Plant in Hamburg, Germany

    E-Print Network [OSTI]

    Columbia University

    is equipped with SNCR technology, baghouse filters, HCl & SO2 scrubbers Power Plant: Coal and Gas MVB Unit 3

  15. WASHINGTON. DC.

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE-SessionsSouth DakotaRobbins and700, 1. .&. ' , cMarch 20, 1995WASHINGTON.

  16. Washington, DC'

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE-SessionsSouth DakotaRobbins and700, 1. .&. ' , cMarch 20,WJLP-~ . '-WQl .of.

  17. A COAXIAL TE011 CAVITY AND A SYSTEM TO MEASURE DC AND RF PROPERTIES OF SUPERCONDUCTORS

    SciTech Connect (OSTI)

    Gianluigi Ciovati; Peter Kneisel; Ganapati Myneni; Larry Turlington; Gary Slack; Michael Morrone; William Clemens; Richard Bundy; Thomas Elliott; Jayanta Mondal

    2008-01-23

    A coaxial niobium cavity has been designed and built where the center conductor consists of a removable sample. In addition, a system to measure properties such as magnetization, penetration depth, critical temperature and thermal conductivity on the same cylindrical sample has been designed and built. The purpose of this effort is to investigate possible correlations between DC and RF properties of superconductors. In this contribution, the design of the various components is discussed and the test results on a niobium sample obtained so far are presented.

  18. DC superconducting quantum interference device usable in nuclear quadrupole resonance and zero field nuclear magnetic spectrometers

    DOE Patents [OSTI]

    Fan, N.Q.; Clarke, J.

    1993-10-19

    A spectrometer for measuring the nuclear quadrupole resonance spectra or the zero-field nuclear magnetic resonance spectra generated by a sample is disclosed. The spectrometer uses an amplifier having a dc SQUID operating in a flux-locked loop for generating an amplified output as a function of the intensity of the signal generated by the sample. The flux-locked loop circuit includes an integrator. The amplifier also includes means for preventing the integrator from being driven into saturation. As a result, the time for the flux-locked loop to recover from the excitation pulses generated by the spectrometer is reduced. 7 figures.

  19. Aerosynthesis: Growths of Vertically Aligned Carbon Nanofibers with Air DC Plasma

    SciTech Connect (OSTI)

    Kodumagulla, A [North Carolina State University; Varanasi, V [North Carolina State University; Pearce, Ryan [North Carolina State University; Wu, W-C [North Carolina State University; Hensley, Dale K [ORNL; Tracy, Joseph B [North Carolina State University; McKnight, Timothy E [ORNL; Melechko, Anatoli [North Carolina State University

    2014-01-01

    Vertically aligned carbon nanofibers (VACNF) have been synthesized in a mixture of acetone and air using catalytic DC plasma enhanced chemical vapor deposition. Typically, ammonia or hydrogen is used as etchant gas in the mixture to remove carbon that otherwise passivates the catalyst surface and impedes growth. Our demonstration of using air as the etchant gas opens up a possibility that ion etching could be sufficient to maintain the catalytic activity state during synthesis. It also demonstrates the path toward growing VACNFs in open atmosphere.

  20. Measured Savings of DC to AC Drive Retrofit in Plastic Extrusion 

    E-Print Network [OSTI]

    Sfeir, R. A.

    2008-01-01

    Technology Conference, New Orleans, LA, May 6-9, 2008. constant shaft speed, regardless of any load torque variation, which helps control the quality of the melt inside the barrel (constant shaft speed results in constant heat delivered to the resin... the Reclaim department works 24 hours per day, not all extruders operate all the time. From Figure 3 it is estimated that the average utilization factor (UF, the ratio of machine run time to production hours) for the DC driven extruder is 0.55, while...

  1. Use of Facility Contractor Employees for Services to DOE in the Washington, D.C., Area

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-04-15

    To clarify and modify policies and procedures for management of Department of Energy (DOE) facility contractor employees located in the Washington, D.C., area. A facility contractor employee is any employee of either a contractor responsible for managing a Department-owned facility, such as a National Laboratory, or a subcontractor of such a contractor. Facility contractor means any contractor performing under a Management and Operating (M&O), Management and Integration (M&I), or Environmental Restoration Management Contractor (ERMC) contract awarded by a DOE contracting officer. Canceled by DOE O 350.2.

  2. Long range temporal correlation in the chaotic oscillations of a dc glow discharge plasma

    SciTech Connect (OSTI)

    Lahiri, S. [Dinabandhu Mahavidyalaya, Bongaon, North 24 Parganas, Kolkata 743235 (India); Roychowdhury, D. [Techno India, EM4/1 Sector V, Salt Lake, Kolkata 700091 (India); Sekar Iyengar, A. N. [Plasma Physics Division, Saha Institute of Nuclear Physics, 1/AF Bidhannagar, Kolkata 700064 (India)

    2012-08-15

    Long range temporal correlations in the fluctuations of the plasma floating potentials (measured using a Langmuir probe) are investigated in a dc glow discharge plasma. Keeping the neutral pressure constant, the discharge voltage was varied and at the formation of the plasma, quasi periodic oscillations were excited and on further increase of the discharge voltage they became chaotic (irregular) beyond a threshold voltage. We compared the Lyapunov exponent with the Hurst exponent obtained from R/S statistics which showed an opposite behaviour at the transition point. These results are perhaps new since we have not come across such comparative analysis for chaotic oscillations in a glow discharge plasma before.

  3. Demonstration of LED Retrofit Lamps at the Smithsonian American Art Museum, Washington, DC

    SciTech Connect (OSTI)

    Miller, Naomi J.; Rosenfeld, Scott M.

    2012-06-22

    This report documents observations and results obtained from a lighting demonstration project conducted under the U.S. Department of Energy GATEWAY Solid-State Lighting (SSL) Technology Demonstration Program at the Smithsonain American Art Museum in Washington, DC. LED Lamp samples were tested in the museum workshop, temporarily installed in a gallery for feedback, and ultimately replaced all traditional incandescent lamps in one gallery of modernist art at the American Art Museum and partially replacing lamps in two galleries at the Musesum's Renwick Gallery. This report describes the selection and testing process, technology challenges, perceptions, economics, energy use, and mixed results of usign LED replacement lamps in art galleries housing national treasures.

  4. Washington DC Regions | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe23-24, 2011Science (SC)Science (SC)UtahVirginiaDC Regions

  5. Washington DC Regions | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe23-24, 2011Science (SC)Science (SC)UtahVirginiaDC

  6. Global DC Power System Market Key Vendors | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource History View New Pages RecentPlant <SilverChange Associates JumpGlobal DC

  7. INFORMATION: Audit Report on The Office of Secure Transportation DC-9 Aircraft Refurbishment

    SciTech Connect (OSTI)

    None

    2009-05-01

    The National Nuclear Security Administration's (NNSA) Office of Secure Transportation (OST) maintains a fleet of seven aircraft to transport sensitive items, equipment and security personnel. Based on increasing requirements for transporting components and security personnel, OST decided to add a heavy transport aircraft to meet the Department's weapons surety and emergency response missions. In 2004, as a replacement following the sale of a portion of its fleet, OST acquired a DC-9 cargo aircraft that had been excessed by the U.S. military. Prior to integrating the DC-9 into its fleet, NNSA ordered a refurbishment of the aircraft. This refurbishment project was to permit the aircraft to be certified to civil air standards so that it could transport passengers for site visits, training and other travel. The NNSA Service Center (Service Center) awarded a contract for the refurbishment of the aircraft in December 2004. In recent years, the Office of Inspector General has addressed a number of issues relating to the Department's aircraft management activities and services. As part of our ongoing review process and because of the national security importance of its fleet of aircraft, we conducted this review to determine whether OST had an effective and efficient aviation management program.

  8. Simulation Study of an Extended Density DC Glow Toroidal Plasma Source

    SciTech Connect (OSTI)

    Granda-Gutierrez, E. E.; Piedad-Beneitez, A. de la; Lopez-Callejas, R.; Godoy-Cabrera, O. G.; Benitez-Read, J. S.; Pacheco-Sotelo, J. O.; Pena-Eguiluz, R.; Mercado-Cabrera, A.; Valencia A, R.; Barocio, S. R.

    2006-12-04

    Conventional wisdom assigns the DC glow discharge regime to plasma currents below {approx}500 mA values, beyond which the discharge falls into the anomalous glow and the turbulent arc regimes. However, we have found evidence that, during toroidal discharges, this barrier can be ostensibly extended up to 800 mA. Thus, a computer simulation has been applied to the evolution of the main electrical characteristics of such a glow discharge plasma in a toroidal vessel in order to design and construct a respective voltage/current controlled source. This should be able to generate a DC plasma in the glow regime with which currents in the range 10-3-100 A can be experimented and 109-1010 cm-3 plasma densities can be achieved to PIII optimization purposes. The plasma is modelled as a voltage-controlled current source able to be turned on whenever the breakdown voltage is reached across the gap between the anode and the vessel wall. The simulation outcome fits well our experimental measurements showing that the plasma current obeys power laws that are dependent on the power current and other control variables such as the gas pressure.

  9. Frequency multiplexed flux locked loop architecture providing an array of DC SQUIDS having both shared and unshared components

    DOE Patents [OSTI]

    Ganther, Jr., Kenneth R. (Olathe, KS); Snapp, Lowell D. (Independence, MO)

    2002-01-01

    Architecture for frequency multiplexing multiple flux locked loops in a system comprising an array of DC SQUID sensors. The architecture involves dividing the traditional flux locked loop into multiple unshared components and a single shared component which, in operation, form a complete flux locked loop relative to each DC SQUID sensor. Each unshared flux locked loop component operates on a different flux modulation frequency. The architecture of the present invention allows a reduction from 2N to N+1 in the number of connections between the cryogenic DC SQUID sensors and their associated room temperature flux locked loops. Furthermore, the 1.times.N architecture of the present invention can be paralleled to form an M.times.N array architecture without increasing the required number of flux modulation frequencies.

  10. Influence of a transverse magnetic field on arc root movements in a dc plasma torch: Diamagnetic effect of arc column

    SciTech Connect (OSTI)

    Kim, Keun Su

    2009-03-23

    The effect of a transverse magnetic field on the anodic arc root movement inside a dc plasma torch has been investigated. The arc voltage fluctuation, which represents the degree of the arc instability, was reduced to 28.6% of the original value and the high frequency components in the voltage signal also decreased in their magnitudes. The inherent arc instability in a dc thermal plasma torch seems to be suppressed by a diamagnetic effect of the arc column. Furthermore, the measured voltage wave forms indicated that the arc root attachment mode would be controllable by a transverse magnetic field.

  11. A new control strategy to improve the performance of PWM ac to dc converter under unbalanced operating condition 

    E-Print Network [OSTI]

    Choudhury, Shamim A.

    1992-01-01

    A NEW CONTROL STRATEGY TO IMPROVE THE PERFORMANCE OF PWM AC TO DC CONVERTER UNDER UNBALANCED OPERATING CONDITION A Thesis by SHAMIM A. CHOUDHURY Submitted to the Office of Graduate Studies of Texas ARM University in partial fulfillment... of the requirements for the degree of MASTER 0 F S CIE'VCE t&fay 1992 Major Subject: Electrical Engineering A NEW CONTROL STRATEGY TO IMPROVE THE PERFORMANCE OF PWM AC TO DC CONVERTER UNDER UNBALANCED OPERATING CONDITION A Thesis by SHAMIM A. CHOUDHURY...

  12. Scaling and laws of DC discharges as pointers for HiPIMS plasmas

    E-Print Network [OSTI]

    Maszl, Christian; von Keudell, Achim; Störi, Herbert

    2015-01-01

    Scaling or smiliarity laws of plasmas are of interest if lab size plasma sources are to be scaled for industrial processes. Ideally, the discharge parameters of the scaled plasmas are predictable and the fundamental physical processes are unaltered. Naturally, there are limitations and ranges of validity. Scaling laws for direct current glow discharges are well known. If a well diagnosed discharge is scaled, the field strength in the positive column, the gas amplification and the normal current density can easily be estimated. For non-stationary high power discharges like high power impulse magnetron sputtering (HiPIMS) plasmas, scaling is not as straight forward. Here, one deals with a non-stationary complex system with strong changes in plasma chemistry and symmetry breaks during the pulses. Because of the huge parameter space no good parameters are available to define these kind of discharges unambiguous at the moment. In this contribution we will discuss the scaling laws for DC glow discharges briefly and...

  13. Crossed-beam DC slice imaging of fluorine atom reactions with linear alkanes

    SciTech Connect (OSTI)

    Shi, Yuanyuan; Kamasah, Alexander; Joalland, Baptiste; Suits, Arthur G.

    2015-05-14

    We report the reaction dynamics of F atom with selected alkanes studied by crossed beam scattering with DC slice ion imaging. The target alkanes are propane, n-butane, and n-pentane. The product alkyl radicals are probed by 157 nm single photon ionization following reaction at a collision energy of ?10 kcal mol{sup ?1}. The analyzed data are compared with the corresponding theoretical studies. Reduced translational energy distributions for each system show similar trends with little of the reaction exoergicity appearing in translation. However, the pentane reaction shows a somewhat smaller fraction of available energy in translation than the other two, suggesting greater energy channeled into pentyl internal degrees of freedom. The center-of-mass angular distributions all show backscattering as well as sharp forward scattering that decreases in relative intensity with the size of the molecule. Possible reasons for these trends are discussed.

  14. Dynamics of CN+alkane reactions by crossed-beam dc slice imaging

    SciTech Connect (OSTI)

    Huang Cunshun; Li Wen; Estillore, Armando D.; Suits, Arthur G.

    2008-08-21

    The hydrogen atom abstraction reactions of CN (X {sup 2}{sigma}{sup +}) with alkanes have been studied using the crossed molecular beam technique with dc slice ion imaging at collision energies of 7.5 and 10.8 kcal/mol. The product alkyl radical images were obtained via single photon ionization at 157 nm for the reactions of CN (X {sup 2}{sigma}{sup +}) with n-butane, n-pentane, n-hexane, and cyclohexane. From analysis of the images, we obtained the center-of-mass frame product angular distributions and translational energy distributions directly. The results indicate that the products are largely backscattered and that most of the available energy ({approx}80%-85%) goes to the internal energy of the products. The reaction dynamics is discussed in light of recent kinetics data, theoretical calculations, and results for related halogen and oxygen atom reactions.

  15. Control method for peak power delivery with limited DC-bus voltage

    DOE Patents [OSTI]

    Edwards, John; Xu, Longya; Bhargava, Brij B.

    2006-09-05

    A method for driving a neutral point-clamped multi-level voltage source inverter supplying a synchronous motor is provided. A DC current is received at a neutral point-clamped multi-level voltage source inverter. The inverter has first, second, and third output nodes. The inverter also has a plurality of switches. A desired speed of a synchronous motor connected to the inverter by the first second and third nodes is received by the inverter. The synchronous motor has a rotor and the speed of the motor is defined by the rotational rate of the rotor. A position of the rotor is sensed, current flowing to the motor out of at least two of the first, second, and third output nodes is sensed, and predetermined switches are automatically activated by the inverter responsive to the sensed rotor position, the sensed current, and the desired speed.

  16. Design and analysis of 5045 S-band klystron DC electron gun

    E-Print Network [OSTI]

    Rehman, Abdul; Zhou, Z

    2015-01-01

    The design and performance analysis of DC electron gun for 5045 S-band klystron has been worked out using SLAC beam trajectory program (EGUN) and Computer Simulation Technology Particle Studio (CST-PS), Codes. Specifications of electron gun were focused on beam; current, perveance, size and emittance. Optimized beam; current, perveance, diameter and emittance were 414.00A, 2.00uP, 26.82 mm and 103.10 pi mm mrad, respectively. Furthermore, the optimized characteristic parameters of the gun were also calculated and compared with the simulated and experimental values which were in agreement. Accuracy of simulation was verified by comparison of emitted beam current which has error of zero percent.

  17. Design and analysis of 5045 S-band klystron DC electron gun

    E-Print Network [OSTI]

    Abdul Rehman; Munawar Iqbal; Z. Zhou

    2015-12-30

    The design and performance analysis of DC electron gun for 5045 S-band klystron has been worked out using SLAC beam trajectory program (EGUN) and Computer Simulation Technology Particle Studio (CST-PS), Codes. Specifications of electron gun were focused on beam; current, perveance, size and emittance. Optimized beam; current, perveance, diameter and emittance were 414.00A, 2.00uP, 26.82 mm and 103.10 pi mm mrad, respectively. Furthermore, the optimized characteristic parameters of the gun were also calculated and compared with the simulated and experimental values which were in agreement. Accuracy of simulation was verified by comparison of emitted beam current which has error of zero percent.

  18. Computational study of flow dynamics from a dc arc plasma jet

    E-Print Network [OSTI]

    Trelles, Juan Pablo

    2013-01-01

    Plasma jets produced by direct-current (DC) non-transferred arc plasma torches, at the core of technologies ranging from spray coating to pyrolysis, present intricate dynamics due to the coupled interaction of fluid flow, thermal, and electromagnetic phenomena. The flow dynamics from an arc discharge plasma jet are investigated using time-dependent three-dimensional simulations encompassing the dynamics of the arc inside the torch, the evolution of the jet through the discharge environment, and the subsequent impingement of the jet over a flat substrate. The plasma is described by a chemical equilibrium and thermodynamic nonequilibrium (two-temperature) model. The numerical formulation of the physical model is based on a monolithic and fully-coupled treatment of the fluid and electromagnetic equations using a Variational Multiscale Finite Element Method. Simulation results uncover distinct aspects of the flow dynamics, including the jet forcing due to the movement of the electric arc, the prevalence of deviat...

  19. Studies on optoelectronic properties of DC reactive magnetron sputtered chromium doped CdO thin films

    SciTech Connect (OSTI)

    Hymavathi, B., E-mail: brkhyma@gmail.com; Rao, T. Subba, E-mail: thotasubbarao6@gmail.com [Department of Physics, Sri Krishnadevaraya University, Anantapuramu - 515 003, A.P. (India); Kumar, B. Rajesh, E-mail: rajphyind@gmail.com [Department of Physics, GITAM Institute of Technology, GITAM University, Visakhapatnam - 530 045, A.P. (India)

    2014-10-15

    Cr doped CdO thin films were deposited on glass substrates by DC reactive magnetron sputtering method and subsequently annealed from 200 °C to 500 °C. X-ray diffraction analysis showed that the films exhibit (1 1 1) preferred orientation. The optical transmittance of the films increases from 64% to 88% with increasing annealing temperature. The optical band gap values were found to be decreased from 2.77 to 2.65 eV with the increase of annealing temperature. The decrease in optical band gap energy with increasing annealing temperature can be attributed to improvement in the crystallinity of the films and may also be due to quantum confinement effect. A minimum resistivity of 2.23 × 10{sup ?4} ?.cm and sheet resistance of 6.3 ?/sq is obtained for Cr doped CdO film annealed at 500 °C.

  20. TiN coated aluminum electrodes for DC high voltage electron guns

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Mamun, Md Abdullah A.; Elmustafa, Abdelmageed A.; Taus, Rhys; Forman, Eric; Poelker, Matthew

    2015-05-01

    Preparing electrodes made of metals like stainless steel, for use inside DC high voltage electron guns, is a labor-intensive and time-consuming process. In this paper, the authors report the exceptional high voltage performance of aluminum electrodes coated with hard titanium nitride (TiN). The aluminum electrodes were comparatively easy to manufacture and required only hours of mechanical polishing using silicon carbide paper, prior to coating with TiN by a commercial vendor. The high voltage performance of three TiN-coated aluminum electrodes, before and after gas conditioning with helium, was compared to that of bare aluminum electrodes, and electrodes manufactured from titanium alloymore »(Ti-6AI-4V). Following gas conditioning, each TiN-coated aluminum electrode reached -225 kV bias voltage while generating less than 100 pA of field emission (« less

  1. Volatilization and redox testing in a DC arc melter: FY-93 and FY-94

    SciTech Connect (OSTI)

    Grandy, J.D.; Sears, J.W.; Soelberg, N.R.; Reimann, G.A.; McIlwain, M.E.

    1996-07-01

    The purpose of these experiments was to study the dissolution, retention, volatilization, and trapping of transuranic radionuclide elements (TRUs), mixed fission and activation products, and high vapor pressure metals (HVPMS) during processing in a high temperature arc furnace. In all cases, surrogate elements (lanthanides) were used in place of radioactive ones. The experiments were conducted utilizing a small DC arc melter developed at the Idaho National Engineering Laboratory (INEL) Research Center (IRC). The small arc melter was originally developed in 1992 and has been used previously for waste form studies of iron enriched basalt (IEB) and IEB with zirconium and titanium additions (IEB4). Section 3 contains a description of the small arc melter and its operational capabilities are discussed in Chapter 4. The remainder of the document describes each testing program and then discusses results and findings.

  2. A Pseudomonas syringae pv. tomato DC3000 mutant lacking the type III effector HopQ1-1 is able to cause disease in the

    E-Print Network [OSTI]

    A Pseudomonas syringae pv. tomato DC3000 mutant lacking the type III effector HopQ1-1 is able-first authors. Summary The model pathogen Pseudomonas syringae pv. tomato DC3000 causes bacterial speck of an avirulence determinant in N. benthamiana: expression in the tobacco wildfire pathogen P. syringae pv. tabaci

  3. Analysis of Fe Nanoparticles Using XPS Measurements Under D.C. or Pulsed-Voltage Bias

    SciTech Connect (OSTI)

    Suzer, Sefik; Baer, Donald R.; Engelhard, Mark H.

    2010-06-16

    The impact of solution exposure on the charging properties of oxide coatings on Fe metal-core oxide-shells has been examined by sample biasing during XPS measurements. The Fe nanoparticles were suspended in relatively unreactive acetone and were analyzed after particle containing solutions were deposited on SiO2/Si substrates, and/or Au substrates. The particle and substrate combinations were subjected to ± 10V d.c. biasing in the form of square waves (SQW) pulses with 5V amplitude. The samples experienced variable degrees of charging for which low energy electrons at ~1 eV, 20?A and low energy Ar+ ions were used to minimize. Application of d.c. bias and/or square wave pulses drastically influences the extent of charging, which is utilized to gather additional analytical information about the sample under investigation. This approach allows separation of otherwise overlapping peaks. Accordingly, the O1s peaks of the silicon oxide substrate, the iron oxide nanoparticles, and that of the casting solvent can be separated from each other. Similarly the C1s peak belonging to the solvent can be separated from that of the adventitious carbon. The charging shifts of the iron nanoparticles are strongly influenced by the surrounding solvent. Hence, acetone exhibits the largest shift, water the smallest, and methanol in between. Dynamical measurements performed by application of the voltage stress in the form of SQW pulses gives information about the time constants of the processes involved, which led us postulate that these charging properties we probe in these systems, stem mainly from ionic movement(s).

  4. Board on Physics and AstronomyBoard on Physics and Astronomy 2101 Constitution Avenue, NW, Washington, DC 20418

    E-Print Network [OSTI]

    -academies.org/bpa August 31, 1999 Dr. Martha Krebs Director Office of Science Department of Energy Washington, DC 20550 Dear Dr. Krebs: National Research Council Chair Dr. Bruce Alberts, in response to your letter and inertial confinement, but the program structures are quite different. The committee does not directly

  5. Characterization of heterogeneous near-surface materials by joint 2D inversion of dc resistivity and seismic data

    E-Print Network [OSTI]

    Meju, Max

    multidimensional non- invasive dc resistivity and seismic refraction investigations of the near-surface have and seismic data Luis A. Gallardo1 and Max A. Meju Department of Environmental Science, Lancaster University-gradients of electrical resistivity and seismic velocity as constraints so as to investigate more precisely

  6. ISIT2001, Washington, DC, June 24{29, 2001 Deriving Performance Bounds for ISI Channels using Gallager Codes

    E-Print Network [OSTI]

    Kavcic, Aleksandar

    ISIT2001, Washington, DC, June 24{29, 2001 Deriving Performance Bounds for ISI Channels using) codes over binary inter- symbol interference (ISI) channels. In contrast to pre- vious work on memoryless channels, the noise toler- ance thresholds for ISI channels depend on the trans- mitted sequences

  7. www.sciencemag.org/cgi/content/full/314/5806/1773/DC1 Supporting Online Material for

    E-Print Network [OSTI]

    Hawai'i at Manoa, University of

    www.sciencemag.org/cgi/content/full/314/5806/1773/DC1 Supporting Online Material for Biomass, Size Text Figs. S1 to S7 Tables S1 to S3 References and Notes #12;Supporting Online Material: Biomass, size and line (or baitboat), and troll, deployed by fishing vessels from approximately 25 different countries

  8. 1. INTRODUCTION SPICE is a general-purpose circuit simulation program for nonlinear dc, nonlinear transient, and

    E-Print Network [OSTI]

    transient, and linear ac analyses. Circuits may contain resistors, capacitors, inductors, mutual inductors operating point of the circuit with inductors shorted and capacitors opened. The dc analysis options and determines linearized, small-signal models for all of the nonlinear devices in the circuit. The resultant

  9. ENGR 201 Electrical Fundamentals I Catalog Description: Analysis of linear circuits. Circuit laws and theorems. DC response of

    E-Print Network [OSTI]

    ENGR 201 ­ Electrical Fundamentals I Catalog Description: Analysis of linear circuits. Circuit laws and laws · Methods of analysis (e.g., nodal, mesh) · Circuit theorems · Operational amplifiers · Capacitors, and apply these for the analysis of dc circuits (ABET outcomes: A, e, m) 4. Analyze circuits made up

  10. Proceedings,Windpower `95, AWEA, Washington DC, March 27-30, 1995. ALL WIND FARM UNCERTAINTY IS NOT THE SAME

    E-Print Network [OSTI]

    Proceedings,Windpower `95, AWEA, Washington DC, March 27-30, 1995. ALL WIND FARM UNCERTAINTY Wind Energy Technology Department Albuquerque, NM 87185-0708 USA ABSTRACT There is uncertainty in the performance of wind energy installations due to unknowns in the local wind environment, machine response

  11. Proceedings of WindPower 95, AWEA, Washington, D.C., 1995. FATIGUE DAMAGE ESTIMATE COMPARISONS FOR

    E-Print Network [OSTI]

    Sandia National Laboratories Albuquerque, New Mexico N.D. Kelley Wind Technology Division NationalProceedings of WindPower 95, AWEA, Washington, D.C., 1995. FATIGUE DAMAGE ESTIMATE COMPARISONS FOR NORTHERN EUROPEAN AND U.S. WIND FARM LOADING ENVIRONMENTS H.J. Sutherland Wind Energy Technology Department

  12. A three-level buck converter to regulate a high-voltage DC-to-AC inverter

    E-Print Network [OSTI]

    Schrock, Kenneth C

    2008-01-01

    A three-level buck converter is designed and analyzed, and shown to be suitable as a high-voltage down converter as a pre-regulation stage for a 600 watt DC-to-AC power inverter. Topology selection for the inverter is ...

  13. A comparison of similar aerosol measurements made on the NASA P3-B, DC-8, and NSF C-130 aircraft

    E-Print Network [OSTI]

    Clarke, Antony

    experiments studied emissions from the Asian continent (biomass burning, urban/industrial pollution, and dust and Yokota Air Force Base, Japan, and involved two aircraft: the NASA DC-8 and the NASA P3-B. ACE-Asia focused on aerosol and radiation during April/May and was based in Iwakuni Marine Corps Air Station, Japan

  14. In Proc of Direct Methanol Fuel Cell Symposium, 199th Electrochem.l Soc. Mtg, Washington DC, 3/01.

    E-Print Network [OSTI]

    Wang, Chao-Yang

    In Proc of Direct Methanol Fuel Cell Symposium, 199th Electrochem.l Soc. Mtg, Washington DC, 3/01. MATHEMATICAL MODELING OF LIQUID-FEED DIRECT METHANOL FUEL CELLS Z. H. Wang and C. Y. Wang Electrochemical methanol fuel cells (DMFC). Diffusion and convection of both gas and liquid phases are considered

  15. 8 References Agee, J.K. 1993. Fire ecology of Pacific Northwest forests. Island Press, Washington, D.C.

    E-Print Network [OSTI]

    , Washington, D.C. Altman, B. 2000. Conservation strategy for landbirds of the east-slope of the Cascade Mountains in Oregon and Washington. Oregon-Washington Partners in Flight. Anderson, M., P. Bourgeron, M. M.S. Thesis, Washington State University, Pullman. WA. Barrett, R.H. 1980. Mammals of California oak

  16. Superconductivity for Electric Systems Annual Peer Review Washington, DC July 27-29, 2004 University of Wisconsin-Madison

    E-Print Network [OSTI]

    1 Superconductivity for Electric Systems Annual Peer Review Washington, DC July 27-29, 2004. Gurevich, D. C. Larbalestier Industrial partner: American Superconductor Corporation Funding: ORNL: 225 k$ (DOE) LANL: 200 k$ (DOE) UW: 200 k$ (DOE, AFOSR-MURI) #12;2 Superconductivity for Electric Systems

  17. Superconductivity for Electric Systems Annual Peer Review Washington, DC July 23-25, 2003 OAK RIDGE NATIONAL LABORATORY

    E-Print Network [OSTI]

    Superconductivity for Electric Systems Annual Peer Review Washington, DC ­ July 23-25, 2003 OAK RIDGE NATIONAL LABORATORY U. S. DEPARTMENT OF ENERGY American Superconductor Corporation M. W. Rupich, D-in ORNL-AMSC CRADA: Development of 2G YBCO-RABiTS Wires #12;Superconductivity for Electric Systems Annual

  18. IEEE ELECTRON DEVICE LETTERS, VOL. 24, NO. 5, MAY 2003 315 DC Sputtered Indium-Tin Oxide Transparent Cathode

    E-Print Network [OSTI]

    severe and relatively independent of the sputtering power. Consequently, a high dc sputtering power-injecting electrode [6]. For a given CuPc thickness, the sputtering power must be high enough to produce a sufficient damage to the underlying emission layer. For a given sputtering power, the CuPc must be thin enough

  19. Aalborg Universitet Reduction of DC-link Capacitor in Case of Cascade Multilevel Converters by means of

    E-Print Network [OSTI]

    Teodorescu, Remus

    ]. The transformer size reduction due to MF operation makes it attractive for offshore applications, such as wind farm integration, and oil & gas exploration platforms [6]. The inverter stage can be omitted], power converter to integrate wind generator to multi- terminal dc collection network are few

  20. Vortical flow control on a conical fore body cross section using an array of pulsed dc actuators

    E-Print Network [OSTI]

    Roy, Subrata

    investigated, separately and then combined on flow control. It is found that joule heating results in highVortical flow control on a conical fore body cross section using an array of pulsed dc actuators 2006; accepted 23 February 2007; published online 1 May 2007 Flow control on a conical fore body cross

  1. Low noise charge sensitive preamplifier DC stabilized without a physical resistor

    DOE Patents [OSTI]

    Bertuccio, G.; Rehak, P.; Xi, D.

    1994-09-13

    The invention is a novel charge sensitive preamplifier (CSP) which has no resistor in parallel with the feedback capacitor. No resetting circuit is required to discharge the feedback capacitor. The DC stabilization of the preamplifier is obtained by means of a second feedback loop between the preamplifier output and the common base transistor of the input cascode. The input transistor of the preamplifier is a Junction Field Transistor (JFET) with the gate-source junction forward biased. The detector leakage current flows into this junction. This invention is concerned with a new circuit configuration for a charge sensitive preamplifier and a novel use of the input Field Effect Transistor of the CSP itself. In particular this invention, in addition to eliminating the feedback resistor, eliminates the need for external devices between the detector and the preamplifier, and it eliminates the need for external circuitry to sense the output voltage and reset the CSP. Furthermore, the noise level of the novel CSP is very low, comparable with the performance achieved with other solutions. Experimental tests prove that this configuration for the charge sensitive preamplifier permits an excellent noise performance at temperatures including room temperature. An equivalent noise charge of less than 20 electrons r.m.s. has been measured at room temperature by using a commercial JFET as input device of the preamplifier. 6 figs.

  2. Structural and optical properties of DC reactive magnetron sputtered zinc aluminum oxide thin films

    SciTech Connect (OSTI)

    Kumar, B. Rajesh; Rao, T. Subba

    2014-10-15

    Highly transparent conductive Zinc Aluminum Oxide (ZAO) thin films have been deposited on glass substrates using DC reactive magnetron sputtering method. The thin films were deposited at 200 °C and post-deposition annealing from 15 to 90 min. XRD patterns of ZAO films exhibit only (0 0 2) diffraction peak, indicating that they have c-axis preferred orientation perpendicular to the substrate. Scanning electron microscopy (SEM) is used to study the surface morphology of the films. The grain size obtained from SEM images of ZAO thin films are found to be in the range of 20 - 26 nm. The minimum resistivity of 1.74 × 10{sup ?4} ? cm and an average transmittance of 92% are obtained for the thin film post annealed for 30 min. The optical band gap of ZAO thin films increased from 3.49 to 3.60 eV with the increase of annealing time due to Burstein-Moss effect. The optical constants refractive index (n) and extinction coefficient (k) were also determined from the optical transmission spectra.

  3. Characterization of the CEBAF 100 kV DC GaAs Photoelectron Gun Vacuum System

    SciTech Connect (OSTI)

    M.L. Stutzman; P. Adderley; J. Brittian; J. Clark; J. Grames; J. Hansknecht; G.R. Myneni; M. Poelker

    2007-05-01

    A vacuum system with pressure in the low ultra-high vacuum (UHV) range is essential for long photocathode lifetimes in DC high voltage GaAs photoguns. A discrepancy between predicted and measured base pressure in the CEBAF photoguns motivated this study of outgassing rates of three 304 stainless steel chambers with different pretreatments and pump speed measurements of non-evaporable getter (NEG) pumps. Outgassing rates were measured using two independent techniques. Lower outgassing rates were achieved by electropolishing and vacuum firing the chamber. The second part of the paper describes NEG pump speed measurements as a function of pressure through the lower part of the UHV range. Measured NEG pump speed is high at pressures above 5×10^?11 Torr, but may decrease at lower pressures depending on the interpretation of the data. The final section investigates the pump speed of a locally produced NEG coating applied to the vacuum chamber walls. These studies represent the first detailed vacuum measurements of CEBAF photogun vacuum chambers.

  4. Computational study of flow dynamics from a dc arc plasma jet

    E-Print Network [OSTI]

    Juan Pablo Trelles

    2013-03-15

    Plasma jets produced by direct-current (DC) non-transferred arc plasma torches, at the core of technologies ranging from spray coating to pyrolysis, present intricate dynamics due to the coupled interaction of fluid flow, thermal, and electromagnetic phenomena. The flow dynamics from an arc discharge plasma jet are investigated using time-dependent three-dimensional simulations encompassing the dynamics of the arc inside the torch, the evolution of the jet through the discharge environment, and the subsequent impingement of the jet over a flat substrate. The plasma is described by a chemical equilibrium and thermodynamic nonequilibrium (two-temperature) model. The numerical formulation of the physical model is based on a monolithic and fully-coupled treatment of the fluid and electromagnetic equations using a Variational Multiscale Finite Element Method. Simulation results uncover distinct aspects of the flow dynamics, including the jet forcing due to the movement of the electric arc, the prevalence of deviations between heavy-species and electron temperatures in the plasma fringes, the development of shear flow instabilities around the jet, the occurrence of localized regions with high electric fields far from the arc, and the formation and evolution of coherent flow structures.

  5. Fabrication of layered self-standing diamond film by dc arc plasma jet chemical vapor deposition

    SciTech Connect (OSTI)

    Chen, G. C.; Dai, F. W.; Li, B.; Lan, H.; Askari, J.; Tang, W. Z.; Lu, F. X.

    2007-01-15

    Layered self-standing diamond films, consisting of an upper layer, buffer layer, and a lower layer, were fabricated by fluctuating the ratio of methane to hydrogen in high power dc arc plasma jet chemical vapor deposition. There were micrometer-sized columnar diamond crystalline grains in both upper layer and lower layer. The size of the columnar diamond crystalline grains was bigger in the upper layer than that in the lower layer. The orientation of the upper layer was (110), while it was (111) for the lower layer. Raman results showed that no sp{sup 3} peak shift was found in the upper layer, but it was found and blueshifted in the lower layer. This indicated that the internal stress within the film body could be tailored by this layered structure. The buffer layer with nanometer-sized diamond grains formed by secondary nucleation was necessary in order to form the layered film. Growth rate was over 10 {mu}m/h in layered self-standing diamond film fabrication.

  6. Studies on optoelectronic properties of DC reactive magnetron sputtered CdTe thin films

    SciTech Connect (OSTI)

    Kumar, B. Rajesh, E-mail: rajphyind@gmail.com [Department of Physics, Sri Venkateswara University, Tirupati - 517 502, A.P, India and Department of Physics, Sri Krishnadevaraya University, Anantapur - 515 003, A.P (India); Hymavathi, B.; Rao, T. Subba [Department of Physics, Sri Krishnadevaraya University, Anantapur - 515 003, A.P (India)

    2014-01-28

    Cadmium telluride continues to be a leading candidate for the development of cost effective photovoltaics for terrestrial applications. In the present work two individual metallic targets of Cd and Te were used for the deposition of CdTe thin films on mica substrates from room temperature to 300 °C by DC reactive magnetron sputtering method. XRD patterns of CdTe thin films deposited on mica substrates exhibit peaks at 2? = 27.7°, 46.1° and 54.6°, which corresponds to reflection on (1 1 1), (2 2 0) and (3 1 1) planes of CdTe cubic structure. The intensities of XRD patterns increases with the increase of substrate temperature upto 150 °C and then it decreases at higher substrate temperatures. The conductivity of CdTe thin films measured from four probe method increases with the increase of substrate temperature. The activation energies (?E) are found to be decrease with the increase of substrate temperature. The optical transmittance spectra of CdTe thin films deposited on mica have a clear interference pattern in the longer wavelength region. The films have good transparency (T > 85 %) exhibiting interference pattern in the spectral region between 1200 – 2500 nm. The optical band gap of CdTe thin films are found to be in the range of 1.48 – 1.57. The refractive index, n decreases with the increase of wavelength, ?. The value of n and k increases with the increase of substrate temperature.

  7. Method for manufacturing compound semiconductor field-effect transistors with improved DC and high frequency performance

    DOE Patents [OSTI]

    Zolper, John C. (Vienna, VA); Sherwin, Marc E. (Rockville, MD); Baca, Albert G. (Albuquerque, NM)

    2000-01-01

    A method for making compound semiconductor devices including the use of a p-type dopant is disclosed wherein the dopant is co-implanted with an n-type donor species at the time the n-channel is formed and a single anneal at moderate temperature is then performed. Also disclosed are devices manufactured using the method. In the preferred embodiment n-MESFETs and other similar field effect transistor devices are manufactured using C ions co-implanted with Si atoms in GaAs to form an n-channel. C exhibits a unique characteristic in the context of the invention in that it exhibits a low activation efficiency (typically, 50% or less) as a p-type dopant, and consequently, it acts to sharpen the Si n-channel by compensating Si donors in the region of the Si-channel tail, but does not contribute substantially to the acceptor concentration in the buried p region. As a result, the invention provides for improved field effect semiconductor and related devices with enhancement of both DC and high-frequency performance.

  8. Deposition and characterization of TiZrV-Pd thin films by dc magnetron sputtering

    E-Print Network [OSTI]

    Wang, Jie; Xu, Yan-Hui; Wei, Wei; Fan, Le; Pei, Xiang-Tao; Hong, Yuan-Zhi; Wang, Yong

    2015-01-01

    TiZrV film is mainly applied in the ultra-high vacuum pipe of storage ring. Thin film coatings of palladium which was added onto the TiZrV film to increase the service life of nonevaporable getters and enhance pumping speed for H2, was deposited on the inner face of stainless steel pipes by dc magnetron sputtering using argon gas as the sputtering gas. The TiZrV-Pd film properties were investigated by atomic force microscope (AFM), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS) and X-Ray Diffraction (XRD). The grain size of TiZrV and Pd film were about 0.42~1.3 nm and 8.5~18.25 nm respectively. It was found that the roughness of TiZrV films was small, about 2~4 nm, for Pd film it is large, about 17~19 nm. PP At. % of Pd in TiZrV/Pd films varied from 86.84 to 87.56 according to the XPS test results.

  9. DOE Advanced Controls R&D Planning Workshop, June 11, 2003, Washington DC: Workshop Results

    SciTech Connect (OSTI)

    Brambley, Michael R.; Haves, Philip; McDonald, Sean C.; Torcellini, Paul; Hansen, David G.; Holmberg, David; Roth, Kurt

    2005-04-13

    On June 11, 2003, representatives from universities, federal and state government agencies, Department of Energy national laboratories, and the private sector attended a one-day workshop in Washington, DC. The objective of the workshop was to review and provide input into DOE's assessment of the market for advanced sensors and controls technology and potential R&D pathways to enhance their success in the buildings market place. The workshop consisted of two sessions. During the morning session, participants were given an overview on the following topics: market assessment, current applications and strategies for new applications, sensors and controls, networking, security, and protocols and standards, and automated diagnostics, performance measurement, commissioning and optimal control and tools. In the sessions, workshop participants were asked to review the potential R&D pathways, identify high priority activities, and outline a five year path for each of these activities. Priorities were as follows: largest and quickest impact; best use of finite resources; greatest likelihood for market penetration; and ability to replicate results. The participants identified several promising R&D opportunities.

  10. Low noise charge sensitive preamplifier DC stabilized without a physical resistor

    DOE Patents [OSTI]

    Bertuccio, Giuseppe (Brianza, IT); Rehak, Pavel (Patchogue, NY); Xi, Deming (Beijing, CN)

    1994-09-13

    The invention is a novel charge sensitive preamplifier (CSP) which has no resistor in parallel with the feedback capacitor. No resetting circuit is required to discharge the feedback capacitor. The DC stabilization of the preamplifier is obtained by means of a second feedback loop between the preamplifier output and the common base transistor of the input cascode. The input transistor of the preamplifier is a Junction Field Transistor (JFET) with the gate-source junction forward biased. The detector leakage current flows into this junction. This invention is concerned with a new circuit configuration for a charge sensitive preamplifier and a novel use of the input Field Effect Transistor of the CSP itself. In particular this invention, in addition to eliminating the feedback resistor, eliminates the need for external devices between the detector and the preamplifier, and it eliminates the need for external circuitry to sense the output voltage and reset the CSP. Furthermore, the noise level of the novel CSP is very low, comparable with the performance achieved with other solutions. Experimental tests prove that this configuration for the charge sensitive preamplifier permits an excellent noise performance at temperatures including room temperature. An equivalent noise charge of less than 20 electrons r.m.s. has been measured at room temperature by using a commercial JFET as input device of the preamplifier.

  11. Role of dc space charge field in the optimization of microwave conversion efficiency from a modulated intense relativistic electron beam

    SciTech Connect (OSTI)

    Xiao, Renzhen; Chen, Changhua; Wu, Ping; Song, Zhimin; Sun, Jun [Science and Technology on High Power Microwave Laboratory, Northwest Institute of Nuclear Technology, Xi'an 710024 (China)] [Science and Technology on High Power Microwave Laboratory, Northwest Institute of Nuclear Technology, Xi'an 710024 (China)

    2013-12-07

    We demonstrate an efficiency of 70% with 5.1 GW microwave power for a diode voltage of 770 kV and a current modulation coefficient of 1.67 in a klystron-like relativistic backward wave oscillator. The device combines the advantages of reducing electron beam radius, adopting dual-cavity extractor, and introducing two pre-modulation cavities. A large dc space charge field is present due to the conversion of considerable potential energy to kinetic energy at the end of beam-wave interaction region. A nonlinear theory is developed to show that the dc space charge field can increase the current modulation coefficient and microwave conversion efficiency significantly.

  12. www.sciencemag.org/cgi/content/full/321/5890/824/DC1 Supporting Online Material for

    E-Print Network [OSTI]

    Reif, John H.

    www.sciencemag.org/cgi/content/full/321/5890/824/DC1 Supporting Online Material for Programming DNA) and annealed in a water bath in a styrofoam box by cooling from 90 C to 23 C over a period of 24 to 72 hours-state laser (CrystaLaser, Reno, NV). The Cy3 emission was detected by a 60×, 1.2 NA water immersion objective

  13. Automatic System for the D.C. High Voltage Qualification of the Superconducting Electrical Circuits of the LHC Machine

    E-Print Network [OSTI]

    Bozzini, D; Russenschuck, Stephan; Bednarek, M; Jurkiewicz, P; Kotarba, A; Ludwin, J; Olek, S

    2008-01-01

    A d.c. high voltage test system has been developed to verify automatically the insulation resistance of the powering circuits of the LHC. In the most complex case, up to 72 circuits share the same volume inside cryogenic lines. Each circuit can have an insulation fault versus any other circuit or versus ground. The system is able to connect up to 80 circuits and apply a voltage up to 2 kV D.C. The leakage current flowing through each circuit is measured within a range of 1 nA to 1.6 mA. The matrix of measurements allows characterizing the paths taken by the currents and locating weak points of the insulation between circuits. The system is composed of a D.C. voltage source and a data acquisition card. The card is able to measure with precision currents and voltages and to drive up to 5 high voltage switching modules offering 16 channels each. A LabVIEW application controls the system for an automatic and safe operation. This paper describes the hardware and software design, the testing methodology and the res...

  14. Telluric and D.C. Resistivity Techniques Applied to the Geophysical Investigation of Basin and Range Geothermal Systems, Part III: The Analysis of Data From Grass Valley, Nevada

    E-Print Network [OSTI]

    Beyer, J.H.

    2010-01-01

    a reasonable interpretation of gravity, seismic and d.c.interpretation of telluric and d.c. resistivity data, In conjunction with gravity, seismic, andseismic refraction/reflection. Only the data which are most pertinent to the interpretation

  15. Data:E27214d6-18ee-410f-87b6-ecf189dc6f07 | Open Energy Information

    Open Energy Info (EERE)

    ecf189dc6f07 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2....

  16. Data:6941e69c-3b58-4100-9f8a-95b61dc551f9 | Open Energy Information

    Open Energy Info (EERE)

    dc551f9 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2....

  17. Telluric and D.C. Resistivity Techniques Applied to the Geophysical Investigation of Basin and Range Geothermal Systems, Part III: The Analysis of Data From Grass Valley, Nevada

    E-Print Network [OSTI]

    Beyer, J.H.

    2010-01-01

    a reasonable interpretation of gravity, seismic and d.c.interpretation of telluric and d.c. resistivity data, In conjunction with gravity, seismic,seismic refraction/reflection. Only the data which are most pertinent to the interpretation

  18. Para informacin en espaol, visite www.consumerfinance.gov/learnmore o escribe a la Consumer Financial Protection Bureau, 1700 G Street N.W., Washington, DC 20552.

    E-Print Network [OSTI]

    Financial Protection Bureau, 1700 G Street N.W., Washington, DC 20552. A Summary of Your Rights Under to www.consumerfinance.gov/learnmore or write to: Consumer Financial Protection Bureau, 1700 G Street N.W

  19. Non invasive brain stimulation : modeling and experimental analysis of transcranial magnetic stimulations and transcranial DC stimulation as a modality for neuropathology treatment

    E-Print Network [OSTI]

    Wagner, Timothy A. (Timothy Andrew), 1974-

    2006-01-01

    This thesis will explore the use of Transcranial Magnetic Stimulation (TMS) and Transcranial DC Stimulation (tDCS) as modalities for neuropathology treatment by means of both experimental and modeling paradigms. The first ...

  20. Analysis of system wide distortion in an integrated power system utilizing a high voltage DC bus and silicon carbide power devices

    E-Print Network [OSTI]

    Fallier, William F. (William Frederick)

    2007-01-01

    This research investigates the distortion on the electrical distribution system for a high voltage DC Integrated Power System (IPS). The analysis was concentrated on the power supplied to a propulsion motor driven by an ...

  1. Use of Management and Operating or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C., Area

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-10-29

    To establish policies and procedures for management of DOE, including NNSA, Management and Operating (M&O) and other facility management contractor employees assigned to the Washington, D.C., area. Cancels DOE O 350.2.

  2. Previously, DC Magnets located at Neutron-Scattering Beamlines were commercially-manufactured superconducting magnets and limited to 17 T. A

    E-Print Network [OSTI]

    Weston, Ken

    Previously, DC Magnets located at Neutron-Scattering Beamlines were commercially, this was the first designed specifically for neutron scattering and the first to include resistive suitable for neutron scattering, diffraction and spectroscopy experiments with the neutron beam passing

  3. Use of Management and Operating or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C. Area

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-05-18

    The Order establishes policies and procedures for managing DOE and NNSA management and operating (M&O) contractors and other facility management contractor employees assigned to the Washington, D.C., area.

  4. Evaluation of electropolished stainless steel electrodes for use in DC high voltage photoelectron guns

    SciTech Connect (OSTI)

    BastaniNejad, Mahzad; Elmustafa, Abdelmageed A.; Forman, Eric; Covert, Steven; Hansknecht, John; Hernandez-Garcia, Carlos; Poelker, Matthew; Das, Lopa; Kelley, Michael; Williams, Phillip

    2015-07-01

    DC high voltage photoelectron guns are used to produce polarized electron beams for accelerator-based nuclear and high-energy physics research. Low-level field emission (~nA) from the cathode electrode degrades the vacuum within the photogun and reduces the photoelectron yield of the delicate GaAs-based photocathode used to produce the electron beams. High-level field emission (>?A) can cause significant damage the photogun. To minimize field emission, stainless steel electrodes are typically diamond-paste polished, a labor-intensive process often yielding field emission performance with a high degree of variability, sample to sample. As an alternative approach and as comparative study, the performance of electrodes electropolished by conventional commercially available methods is presented. Our observations indicate the electropolished electrodes exhibited less field emission upon the initial application of high voltage, but showed less improvement with gas conditioning compared to the diamond-paste polished electrodes. In contrast, the diamond-paste polished electrodes responded favorably to gas conditioning, and ultimately reached higher voltages and field strengths without field emission, compared to electrodes that were only electropolished. The best performing electrode was one that was both diamond-paste polished and electropolished, reaching a field strength of 18.7 MV/m while generating less than 100 pA of field emission. The speculate that the combined processes were the most effective at reducing both large and small scale topography. However, surface science evaluation indicates topography cannot be the only relevant parameter when it comes to predicting field emission performance.

  5. Evaluation of electropolished stainless steel electrodes for use in DC high voltage photoelectron guns

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    BastaniNejad, Mahzad; Elmustafa, Abdelmageed A.; Forman, Eric; Covert, Steven; Hansknecht, John; Hernandez-Garcia, Carlos; Poelker, Matthew; Das, Lopa; Kelley, Michael; Williams, Phillip

    2015-07-01

    DC high voltage photoelectron guns are used to produce polarized electron beams for accelerator-based nuclear and high-energy physics research. Low-level field emission (~nA) from the cathode electrode degrades the vacuum within the photogun and reduces the photoelectron yield of the delicate GaAs-based photocathode used to produce the electron beams. High-level field emission (>?A) can cause significant damage the photogun. To minimize field emission, stainless steel electrodes are typically diamond-paste polished, a labor-intensive process often yielding field emission performance with a high degree of variability, sample to sample. As an alternative approach and as comparative study, the performance of electrodes electropolishedmore »by conventional commercially available methods is presented. Our observations indicate the electropolished electrodes exhibited less field emission upon the initial application of high voltage, but showed less improvement with gas conditioning compared to the diamond-paste polished electrodes. In contrast, the diamond-paste polished electrodes responded favorably to gas conditioning, and ultimately reached higher voltages and field strengths without field emission, compared to electrodes that were only electropolished. The best performing electrode was one that was both diamond-paste polished and electropolished, reaching a field strength of 18.7 MV/m while generating less than 100 pA of field emission. The speculate that the combined processes were the most effective at reducing both large and small scale topography. However, surface science evaluation indicates topography cannot be the only relevant parameter when it comes to predicting field emission performance.« less

  6. Evaluation of electropolished stainless steel electrodes for use in DC high voltage photoelectron guns

    SciTech Connect (OSTI)

    BastaniNejad, Mahzad Elmustafa, Abdelmageed A.; Forman, Eric; Covert, Steven; Hansknecht, John; Hernandez-Garcia, Carlos; Poelker, Matthew; Das, Lopa; Kelley, Michael; Williams, Phillip

    2015-07-15

    DC high voltage photoelectron guns are used to produce polarized electron beams for accelerator-based nuclear and high-energy physics research. Low-level field emission (?nA) from the cathode electrode degrades the vacuum within the photogun and reduces the photoelectron yield of the delicate GaAs-based photocathode used to produce the electron beams. High-level field emission (>?A) can cause significant damage the photogun. To minimize field emission, stainless steel electrodes are typically diamond-paste polished, a labor-intensive process often yielding field emission performance with a high degree of variability, sample to sample. As an alternative approach and as comparative study, the performance of electrodes electropolished by conventional commercially available methods is presented. Our observations indicate the electropolished electrodes exhibited less field emission upon the initial application of high voltage, but showed less improvement with gas conditioning compared to the diamond-paste polished electrodes. In contrast, the diamond-paste polished electrodes responded favorably to gas conditioning, and ultimately reached higher voltages and field strengths without field emission, compared to electrodes that were only electropolished. The best performing electrode was one that was both diamond-paste polished and electropolished, reaching a field strength of 18.7 MV/m while generating less than 100?pA of field emission. The authors speculate that the combined processes were the most effective at reducing both large and small scale topography. However, surface science evaluation indicates topography cannot be the only relevant parameter when it comes to predicting field emission performance.

  7. TiN coated aluminum electrodes for DC high voltage electron guns

    SciTech Connect (OSTI)

    Mamun, Md Abdullah A.; Elmustafa, Abdelmageed A.; Taus, Rhys; Forman, Eric; Poelker, Matthew

    2015-05-15

    Preparing electrodes made of metals like stainless steel, for use inside DC high voltage electron guns, is a labor-intensive and time-consuming process. In this paper, the authors report the exceptional high voltage performance of aluminum electrodes coated with hard titanium nitride (TiN). The aluminum electrodes were comparatively easy to manufacture and required only hours of mechanical polishing using silicon carbide paper, prior to coating with TiN by a commercial vendor. The high voltage performance of three TiN-coated aluminum electrodes, before and after gas conditioning with helium, was compared to that of bare aluminum electrodes, and electrodes manufactured from titanium alloy (Ti-6Al-4V). Following gas conditioning, each TiN-coated aluminum electrode reached ?225?kV bias voltage while generating less than 100?pA of field emission (<10?pA) using a 40?mm cathode/anode gap, corresponding to field strength of 13.7?MV/m. Smaller gaps were studied to evaluate electrode performance at higher field strength with the best performing TiN-coated aluminum electrode reaching ?22.5 MV/m with field emission less than 100?pA. These results were comparable to those obtained from our best-performing electrodes manufactured from stainless steel, titanium alloy and niobium, as reported in references cited below. The TiN coating provided a very smooth surface and with mechanical properties of the coating (hardness and modulus) superior to those of stainless steel, titanium-alloy, and niobium electrodes. These features likely contributed to the improved high voltage performance of the TiN-coated aluminum electrodes.

  8. An experimental and theoretical investigation of a magnetically confined dc plasma discharge

    SciTech Connect (OSTI)

    Rondanini, Maurizio; Cavallotti, Carlo; Ricci, Daria; Chrastina, Daniel; Isella, Giovanni; Moiseev, Tamara; Kaenel, Hans von

    2008-07-01

    A magnetically confined dc plasma discharge sustained by a thermionic source was investigated using a combined experimental and theoretical approach. The discharge originates in an arc plasma source and is expanded in a cylindrical chamber, where it is stabilized by an annular anode. The plasma expansion is contained by an axial magnetic field generated by coils positioned at the top and the bottom of the reactor. The plasma reactor design allows control of the energy of ions impinging on the substrate and thus a high electron density of about 10{sup 17} m{sup -3} at 1 Pa can be reached. The plasma is studied using a model composed of the Poisson and of the charged species continuity equations, solved in the flow and temperature fields determined by solving the Navier-Stokes and Fourier equations. The model equations are integrated using the finite element method in a two-dimensional axial symmetric domain. Ionization rates are either assumed constant or determined by solving the Boltzmann transport equation in the local electric field with the Monte Carlo (MC) method. Electron and ion transport parameters are determined by accounting for magnetic confinement through a simplified solution of the ion and electron momentum conservation equations, which yielded parameters in good agreement with those determined with the MC simulations. Calculated electron densities and plasma potentials were satisfactorily compared to those measured using a Langmuir probe. The model demonstrates that the intensity of the magnetic field greatly influences the electron density, so that a decrease by a factor of 2 in its intensity corresponds to a decrease by almost an order of magnitude of the electron and ion concentrations.

  9. Deposition and characterization of molybdenum thin films using dc-plasma magnetron sputtering

    SciTech Connect (OSTI)

    Khan, Majid, E-mail: majids@hotmail.com [National University of Sciences and Technology, School of Chemical and Materials Engineering (Pakistan); Islam, Mohammad, E-mail: mohammad.islam@gmail.com [King Saud University, Center of Excellence for Research in Engineering Materials, Advanced Manufacturing Institute (Saudi Arabia)

    2013-12-15

    Molebdenum (Mo) thin films were deposited on well-cleaned soda-lime glass substrates using DC-plasma magnetron sputtering. In the design of experiment deposition was optimized for maximum beneficial characteristics by monitoring effect of process variables such as deposition power (100–200 W). Their electrical, structural and morphological properties were analyzed to study the effect of these variables. The electrical resistivity of Mo thin films could be reduced by increasing deposition power. Within the range of analyzed deposition power, Mo thin films showed a mono crystalline nature and the crystallites were found to have an orientation along [110] direction. The surface morphology of thin films showed that a highly dense micro structure has been obtained. The surface roughness of films increased with deposition power. The adhesion of Mo thin films could be improved by increasing the deposition power. Atomic force microscopy was used for the topographical study of the films and to determine the roughness of the films. X-ray diffractrometer and scanning electron microscopy analysis were used to investigate the crystallinity and surface morphology of the films. Hall effect measurement system was used to find resistivity, carrier mobility and carrier density of deposited films. The adhesion test was performed using scotch hatch tape adhesion test. Mo thin films prepared at deposition power of 200 W, substrate temperature of 23°C and Ar pressure of 0.0123 mbar exhibited a mono crystalline structure with an orientation along (110) direction, thickness of ?550 nm and electrical resistivity value of 0.57 × 10{sup ?4} ? cm.

  10. TiN coated aluminum electrodes for DC high voltage electron guns

    SciTech Connect (OSTI)

    Mamun, Md Abdullah A.; Elmustafa, Abdelmageed A.; Taus, Rhys; Forman, Eric; Poelker, Matthew

    2015-05-01

    Preparing electrodes made of metals like stainless steel, for use inside DC high voltage electron guns, is a labor-intensive and time-consuming process. In this paper, the authors report the exceptional high voltage performance of aluminum electrodes coated with hard titanium nitride (TiN). The aluminum electrodes were comparatively easy to manufacture and required only hours of mechanical polishing using silicon carbide paper, prior to coating with TiN by a commercial vendor. The high voltage performance of three TiN-coated aluminum electrodes, before and after gas conditioning with helium, was compared to that of bare aluminum electrodes, and electrodes manufactured from titanium alloy (Ti-6AI-4V). Following gas conditioning, each TiN-coated aluminum electrode reached -225 kV bias voltage while generating less than 100 pA of field emission (<10 pA) using a 40 mm cathode/anode gap, corresponding to field strength of 13.7 MV/m. Smaller gaps were studied to evaluate electrode performance at higher field strength with the best performing TiN-coated aluminum electrode reaching ~22.5 MV/m with field emission less than 100 pA. These results were comparable to those obtained from our best-performing electrodes manufactured from stainless steel, titanium alloy and niobium, as reported in references cited below. The TiN coating provided a very smooth surface and with mechanical properties of the coating (hardness and modulus) superior to those of stainless steel, titanium-alloy, and niobium electrodes. These features likely contributed to the improved high voltage performance of the TiN-coated aluminum electrodes.

  11. Scaling of economic benefits from Green Roof implementation in Washington, DC.

    SciTech Connect (OSTI)

    Niu, H.; Clark, C. E.; Zhou, J.; Adriaens, P.; Environmental Science Division; Dalian Univ. of Technology; Univ. of Michigan

    2010-06-01

    Green roof technology is recognized for mitigating stormwater runoff and energy consumption. Methods to overcome the cost gap between green roofs and conventional roofs were recently quantified by incorporating air quality benefits. This study investigates the impact of scaling on these benefits at the city-wide scale using Washington, DC as a test bed because of the proposed targets in the 20-20-20 vision (20 million ft{sup 2} by 2020) articulated by Casey Trees, a nonprofit organization. Building-specific stormwater benefits were analyzed assuming two proposed policy scenarios for stormwater fees ranging from 35 to 50% reduction for green roof implementation. Heat flux calculations were used to estimate building-specific energy savings for commercial buildings. To assess benefits at the city scale, stormwater infrastructure savings were based on operational savings and size reduction due to reduced stormwater volume generation. Scaled energy infrastructure benefits were calculated using two size reductions methods for air conditioners. Avoided carbon dioxide, nitrogen oxide (NOx), and sulfur dioxide emissions were based on reductions in electricity and natural gas consumption. Lastly, experimental and fugacity-based estimates were used to quantify the NOx uptake by green roofs, which was translated to health benefits using U.S. Environmental Protection Agency models. The results of the net present value (NPV) analysis showed that stormwater infrastructure benefits totaled $1.04 million (M), while fee-based stormwater benefits were $0.22-0.32 M/y. Energy savings were $0.87 M/y, while air conditioner resizing benefits were estimated at $0.02 to $0.04 M/y and avoided emissions benefits (based on current emission trading values) were $0.09 M-0.41 M/y. Over the lifetime of the green roof (40 years), the NPV is about 30-40% less than that of conventional roofs (not including green roof maintenance costs). These considerable benefits, in concert with current and emerging policy frameworks, may facilitate future adoption of this technology.

  12. Brushed permanent magnet DC MLC motor operation in an external magnetic field

    SciTech Connect (OSTI)

    Yun, J.; St Aubin, J.; Rathee, S.; Fallone, B. G.

    2010-05-15

    Purpose: Linac-MR systems for real-time image-guided radiotherapy will utilize the multileaf collimators (MLCs) to perform conformal radiotherapy and tumor tracking. The MLCs would be exposed to the external fringe magnetic fields of the linac-MR hybrid systems. Therefore, an experimental investigation of the effect of an external magnetic field on the brushed permanent magnet DC motors used in some MLC systems was performed. Methods: The changes in motor speed and current were measured for varying external magnetic field strengths up to 2000 G generated by an EEV electromagnet. These changes in motor characteristics were measured for three orientations of the motor in the external magnetic field, mimicking changes in motor orientations due to installation and/or collimator rotations. In addition, the functionality of the associated magnetic motor encoder was tested. The tested motors are used with the Varian 120 leaf Millennium MLC (Maxon Motor half leaf and full leaf motors) and the Varian 52 leaf MKII MLC (MicroMo Electronics leaf motor) including a carriage motor (MicroMo Electronics). Results: In most cases, the magnetic encoder of the motors failed prior to any damage to the gearbox or the permanent magnet motor itself. This sets an upper limit of the external magnetic field strength on the motor function. The measured limits of the external magnetic fields were found to vary by the motor type. The leaf motor used with a Varian 52 leaf MKII MLC system tolerated up to 450{+-}10 G. The carriage motor tolerated up to 2000{+-}10 G field. The motors used with the Varian 120 leaf Millennium MLC system were found to tolerate a maximum of 600{+-}10 G. Conclusions: The current Varian MLC system motors can be used for real-time image-guided radiotherapy coupled to a linac-MR system, provided the fringe magnetic fields at their locations are below the determined tolerance levels. With the fringe magnetic fields of linac-MR systems expected to be larger than the tolerance levels determined, some form of magnetic shielding would be required.

  13. A Five-Level Cascade Multilever Invertor Three-Phase Motor Drive Using a Single DC Source

    SciTech Connect (OSTI)

    Chiasson, J.N. (Univ. Tennessee-Knoxville)

    2006-09-15

    A method is presented showing that a 5-level cascade multilevel inverter for a three-phase permanent magnet synchronous motor drive can be implemented using only a single DC link to supply a standard 3-leg inverter along with three full H-bridges supplied by capacitors. It is shown that the capacitor voltages can be regulated while achieving an output voltage waveform that is 20% greater than that obtained using the standard 3-leg inverter alone. Finally conditions are given in terms of the power factor and modulation index that determine when the capacitor voltage can regulated.

  14. Influence of the airflow speed along transmission lines on the DC corona discharge loss, using finite element approach

    SciTech Connect (OSTI)

    Shemshadi, A.; Akbari, A.; Niayesh, K.

    2012-07-15

    Corona discharge is of great interest from the physical point of view and due to its numerous practical applications in industry and especially one of the most important sources of loss in the high voltage transmission lines. This paper provides guidelines for the amount of electric loss caused by corona phenomenon occurred around a DC high voltage wire placed between two flat plates and influence of wind speed rate on the amount of corona loss using COMSOL Multiphysics. So electric potential distribution patterns and charge density diffusion around the wire are studied in this article.

  15. Collection and conversion of silicon furnace waste gas into higher value products: Phase 3, 6 MW pilot plant dc closed furnace technology. Final report

    SciTech Connect (OSTI)

    Dosaj, V.D.

    1995-01-01

    The construction and operation of a 6 MW, closed dc furnace for smelting silicon was the primary focus of Phase 3. A 6 MW, dc closed furnace pilot plant was built in East Selkirk, Manitoba, Canada. The furnace is equipped with world`s most modern automatic control system used to control and monitor the process variables and operational data. This control system is suitable for commercial applications and could be used with either closed or open dc furnaces for smelting silicon or ferrosilicon. The construction was started in September 1990, and the facility was operational within 18 months. Following successful commissioning of the pilot plant in June 1992, twelve smelting test campaigns were conducted through November 1994.

  16. A Five-Level Three-Phase Cascade Multilevel Inverter Using a Single DC Source for a PM Synchronous Motor Drive

    SciTech Connect (OSTI)

    Ozpineci, Burak; Chiasson, John N; Tolbert, Leon M

    2007-01-01

    The interest here is in using a single DC power source to construct a 3-phase 5-level cascade multilevel inverter to be used as a drive for a PM traction motor. The 5-level inverter consists of a standard 3-leg inverter (one leg for each phase) and an H-bridge in series with each inverter leg, which use a capacitor as a DC source. It is shown that one can simultaneously maintain the regulation of the capacitor voltage while achieving an output voltage waveform which is 25% higher than that obtained using a standard 3-leg inverter by itself.

  17. Frequency noise and intensity noise of next-generation gravitational-wave detectors with RF/DC readout schemes

    E-Print Network [OSTI]

    K. Somiya; Y. Chen; S. Kawamura; N. Mio

    2007-01-29

    The sensitivity of next-generation gravitational-wave detectors such as Advanced LIGO and LCGT should be limited mostly by quantum noise with an expected technical progress to reduce seismic noise and thermal noise. Those detectors will employ the optical configuration of resonant-sideband-extraction that can be realized with a signal-recycling mirror added to the Fabry-Perot Michelson interferometer. While this configuration can reduce quantum noise of the detector, it can possibly increase laser frequency noise and intensity noise. The analysis of laser noise in the interferometer with the conventional configuration has been done in several papers, and we shall extend the analysis to the resonant-sideband-extraction configuration with the radiation pressure effect included. We shall also refer to laser noise in the case we employ the so-called DC readout scheme.

  18. Reducing Our Carbon Footprint: A Low-Energy House in Berkeley, Kabul, and Washington DC (LBNL Science at the Theater)

    ScienceCinema (OSTI)

    Diamond, Rick

    2011-04-28

    How well can we assess and improve building energy performance in California homes? How much energy-and carbon-do homes use in other parts of the world? Rick Diamond, deputy group leader of the Berkeley Lab Energy Performance of Buildings Group, discusses change, global solutions, and the stories of three houses in Berkeley, Kabul (Afghanistan), and Washington, D.C. Diamond, who is also a senior advisor at the California Institute for Energy and Environment, investigates user interactions with the built environment for improved building energy performance. The group has studied a wide range of issues related to energy use in housing, including duct system efficiency, user behavior, and infiltration and ventilation measurements.

  19. Potential for reactive pulsed-dc magnetron sputtering of nanocomposite VO{sub x} microbolometer thin films

    SciTech Connect (OSTI)

    Jin, Yao O., E-mail: yoj5055@psu.edu; Ozcelik, Adem; Horn, Mark W. [Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, Pennsylvania 16802 (United States); Jackson, Thomas N. [Department of Electrical Engineering, The Pennsylvania State University, University Park, Pennsylvania 16802 (United States)

    2014-11-01

    Vanadium oxide (VO{sub x}) thin films were deposited by reactive pulsed-dc sputtering a metallic vanadium target in argon/oxygen mixtures with substrate bias. Hysteretic oxidation of the vanadium target surface was assessed by measuring the average cathode current during deposition. Nonuniform oxidization of the target surface was analyzed by Raman spectroscopy. The VO{sub x} film deposition rate, resistivity, and temperature coefficient of resistance were correlated to oxygen to argon ratio, processing pressure, target-to-substrate distance, and oxygen inlet positions. To deposit VO{sub x} in the resistivity range of 0.1–10 ?-cm with good uniformity and process control, lower processing pressure, larger target-to-substrate distance, and oxygen inlet near the substrate are useful.

  20. Study of the effect of plasma-striking atmosphere on Fe-oxidation in thermal dc arc-plasma processing

    SciTech Connect (OSTI)

    Banerjee, I.; Khollam, Y. B.; Mahapatra, S. K.; Das, A. K.; Bhoraskar, S. V.

    2010-11-15

    The effect of plasma-striking atmosphere: air and air+Ar-gas on the crystallization of Fe-oxide phases was studied using dc thermal arc-plasma processing route. The powders were characterized by x-ray diffraction, vibrating sample magnetometry, transmission electron microscopy, and Moessbauer spectroscopy techniques. At room temperature and O{sub 2} rich atmosphere, arc-evaporated Fe{sup 2+} ions oxidize into either {gamma}-Fe{sub 2}O{sub 3} or Fe{sub 3}O{sub 4} depending upon the combining ratio of Fe with molecular O{sub 2}. Fe/O ratio could be adjusted using proper flow rate of Ar gas to crystallize the pure {gamma}-Fe{sub 2}O{sub 3}.

  1. Effect of magnetic field strength on deposition rate and energy flux in a dc magnetron sputtering system

    SciTech Connect (OSTI)

    Ekpe, Samuel D.; Jimenez, Francisco J.; Field, David J.; Davis, Martin J.; Dew, Steven K. [Department of Electrical and Computer Engineering, University of Alberta, Edmonton, Alberta T6G 2V4 (Canada); NUCRYST Pharmaceuticals, 10102-114 st., Fort Saskatchewan, Alberta T8L 3W4 (Canada); Department of Electrical and Computer Engineering, University of Alberta, Edmonton, Alberta T6G 2V4 (Canada)

    2009-11-15

    Variations in the magnetic field strongly affect the plasma parameters in a magnetron sputtering system. This in turn affects the throughput as well as the energy flux to the substrate. The variation in the magnetic field in this study, for a dc magnetron process, is achieved by shifting the magnet assembly slightly away from the target. Measurements of the plasma parameters show that while the electron density at the substrate increases with decrease in magnetic field, the electron temperature decreases. The cooling of the electron temperature is consistent with results reported elsewhere. The deposition rate per input magnetron power is found to increase slightly with the decrease in magnetic field for the process conditions considered in this study. Results suggest that the energy flux to the substrate tends to show a general decrease with the shift in the magnet assembly.

  2. 82 IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS, PART 1, VOL. 47, NO. 1, JANUARY 2000 Fig. 5. Output voltage waveform in the closed-loop dc-ac power inverter.

    E-Print Network [OSTI]

    Leuciuc, Adrian

    devices from dc sources, such as cars or recreational vehicles, or in uninterruptible power supplies voltage waveform in the closed-loop dc-ac power inverter. Horizontal scale: 5 ms/div.; vertical scale: 0.2 V/div. Fig. 6. Bode plots of the closed-loop power inverter . Packard 4194A Network Analyzer, Bode

  3. Comparison of Water Vapor Measurements by Airborne Sun Photometer and Diode Laser Hygrometer on the NASA DC-8

    SciTech Connect (OSTI)

    Livingston, J. M.; Schmid, Beat; Russell, P. B.; Podolske, James R.; Redemann, Jens; Diskin, G. S.

    2008-10-29

    In January-February 2003 the 14-channel NASA Ames Airborne Tracking Sunphotometer 30 (AATS) and the NASA Langley/Ames Diode Laser Hygrometer (DLH) were flown on the NASA DC-8 aircraft. AATS measured column water vapor on the aircraft-to-sun path, while DLH measured local water vapor in the free stream between the aircraft fuselage and an outboard engine cowling. The AATS and DLH measurements were compared for two DC-8 vertical profiles by differentiating the AATS column measurement and/or integrating the DLH local measurement over the altitude range of each profile (7.7-10 km and 1.2-12.5 km). These comparisons extend, for the first time, tests of AATS water vapor retrievals to altitudes >~6 km and column contents <0.1 g cm-2. To our knowledge this is the first time suborbital spectroscopic water vapor measurements using the 940-nm band have been tested in conditions so high and dry. For both profiles layer water vapor (LWV) from AATS and DLH were highly correlated, with r2 0.998, rms difference 7.2% and bias (AATS minus DLH) 0.9%. For water vapor densities AATS and DLH had r2 0.968, rms difference 27.6%, and bias (AATS minus DLH) -4.2%. These results compare favorably with previous comparisons of AATS water vapor to in situ results for altitudes <~6 km, columns ~0.1 to 5 g cm-2 and densities ~0.1 to 17 g m-3.

  4. ProfessorMassoudAmin,D.Sc. Professor Massoud Amin (http://umn.edu/~amin) witnessed the 1977 NYC blackout, the 9/11 tragedies near DC, and the

    E-Print Network [OSTI]

    Amin, S. Massoud

    blackout, the 9/11 tragedies near DC, and the collapse of the I-35W bridge. He works on enabling smart, secure and resilient infrastructures. He leads extensive projects in smart grids and is considered the father of smart grid. Since March 2003 Professor Amin has served as director of the Technological

  5. Presented at ACADIA 2000 Conference, Washington, D.C., October 2000 and published in the Proceedings of the ACADIA 2000 Conference.

    E-Print Network [OSTI]

    LBNL-45548 DR-437 Presented at ACADIA 2000 Conference, Washington, D.C., October 2000 and published in the Proceedings of the ACADIA 2000 Conference. This work was supported by the Assistant Secretary for Energy April 2000 #12;1 An Expandable Software Model for Collaborative Decision Making During the Whole

  6. d.c. sputtering elaboration of thin films of the high-Tc superconductor YBa2Cu3O7-x: evidence for strong film-substrate interactions

    E-Print Network [OSTI]

    Boyer, Edmond

    257 d.c. sputtering elaboration of thin films of the high-Tc superconductor YBa2Cu3O7-x: evidence thermique mis en oeuvre, apparaît clairement. Abstract. 2014 Superconducting thin films of YBa2Cu3O7-x have3O7-x, a number of foreign elements were diluted in sintered samples of the superconducting matrix

  7. Presented at the 17th International Conference on Testing Computer Software TCS`2000 in Washington, D.C. Using Dependency Charts to Improve

    E-Print Network [OSTI]

    Glinz, Martin

    Presented at the 17th International Conference on Testing Computer Software TCS`2000 in Washington, D.C. Using Dependency Charts to Improve Scenario-Based Testing Management of Inter) are used in many modern software engineering methods for capturing requirements and specifying a system

  8. Lab 4 -Motor Constants and Sensor Calibration Consider a DC servo motor which is connected to a power supply. The motor inertia is Jm. The rotational

    E-Print Network [OSTI]

    Stanford University

    Lab 4 - Motor Constants and Sensor Calibration PRE-LAB Consider a DC servo motor which is connected to a power supply. The motor inertia is Jm. The rotational damping in the motor is bm. The motor produces a torque Tm = Kmi where Km is the motor's torque constant and i is the current from the power supply. a

  9. Energy Conversion in Lifting Mass Vertically using a DC Electric Motor by Observing Required Time to Lift Object for a Certain Height

    E-Print Network [OSTI]

    Viridi, Sparisoma; Permana, Sidik; Srigutomo, Wahyu; Susilawati, Anggie; Nuryadin, Bebeh Wahid; Nurhasan,

    2014-01-01

    In lifting mass vertically using a DC electric motor energy conversion from electric energy, through intermediate kinetic energy, to gravitation potential energy shows that time required {\\Delta}t to lift load mass m for height h is dependent quadratically to m. Several approaches to explain the experiment observation are discussed in this work, from ideal energy conversion to numerical solution from differential equation.

  10. Supplemental Requirements for the Use of Management and Operating or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C., Area

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-10-19

    The Notice supplements review and approval requirements of DOE O 350.2A, Use of Management and Operating (M&O) or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C., Area, dated 10-29-03.

  11. arXiv:1109.2425v1[cs.DC]12Sep2011 Query processing in distributed, taxonomy-based information

    E-Print Network [OSTI]

    Analyti, Anastasia

    to a local vocabulary. The objects may be a category of commercial items, such as cars, and a source mayarXiv:1109.2425v1[cs.DC]12Sep2011 Query processing in distributed, taxonomy-based information sources Carlo Meghini Yannis Tzitzikas Veronica Coltella Anastasia Analyti§ Abstract We address

  12. 1. Nelson, John (January 2013). Continuing and Online Education Forum Market Viability for an Online Master's Degree in Engineering Management. Education Advisory Board, Washington, DC.

    E-Print Network [OSTI]

    Davis, Lloyd M.

    Engineering Manager Positions Improve in the PostRecession Economy National job postings data confirms for an Online Master's Degree in Engineering Management. Education Advisory Board, Washington, DC. National Engineering Management Statistics A forum in Education Advisory Board described the status

  13. To appear in Proceedings of the International Conference on Dependable Systems and Networks (DSN-2002), IEEE/IFIP, June 23-26, 2002, Washington, DC.

    E-Print Network [OSTI]

    Dyreson, Curtis

    -2002), IEEE/IFIP, June 23-26, 2002, Washington, DC. Mr. Fusion1 : A Programmable Data Fusion Middleware. Fusion is a device from Robert Zemeckis' 1985 movie, Back to the Future, and its sequels. It takes garbage in and produces energy for the time-travelling Delorean car of Doc Brown, the genial but mad

  14. PEW INTERNET & AMERICAN LIFE PROJECT 1615 L ST., NW SUITE 700 WASHINGTON, D.C. 20036 202-419-4500 http://www.pewinternet.org/

    E-Print Network [OSTI]

    Schweik, Charles M.

    PEW INTERNET & AMERICAN LIFE PROJECT 1615 L ST., NW ­ SUITE 700 WASHINGTON, D.C. 20036 202-419-4500 http://www.pewinternet.org/ The Strength of Internet Ties The internet and email aid users Jeffrey Boase, University of Toronto John B. Horrigan, Associate Director, Pew Internet Project Barry

  15. CPS Principal Inves0gator's Mee0ng -Washington D.C. -August 1-2, 2011 Wireless Sensor Actuator Networks

    E-Print Network [OSTI]

    Lemmon, Michael

    #12;CPS Principal Inves0gator's Mee0ng - Washington D.C. - August 1-2, 2011 and collection networks · Traffic networks #12;CPS Principal Inves0gator's Mee0ng - Washington D in hardware ­ Technology transfer #12;CPS Principal Inves0gator's Mee0ng - Washington D

  16. Use of Management and Operating or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C. Area

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-05-31

    To establish policies and procedures for management of Department of Energy (DOE), including National Nuclear Security Administration (NNSA), management and operating (M&O) and other facility management contractor employees assigned to the Washington, D.C. area. Supersedes DOE O 350.2A

  17. Postprint of article in Information and Software Technology (2012) On the adoption of MC/DC and control-flow adequacy

    E-Print Network [OSTI]

    2012-01-01

    /DC and control-flow adequacy for a tight integration of program testing and statistical fault localization*,** Bo programs using three adequacy criteria, 16 test case prioritization techniques, and four statistical fault, Beijing, China A B S T R A C T Context: Testing and debugging consume a significant portion of software

  18. Opportunities i2015 Scholarly Opportunities Guide

    E-Print Network [OSTI]

    Sherman, S. Murray

    Marshall Chin, MD, MPH Elbert Huang, MD, MPH Neda Laiteerapong, MD, MS Wei Wei Lee, MD, MPH Monica Peek, MD

  19. Cancer Statistics for Hispanics/Latinos, 2012 Rebecca Siegel, MPH1

    E-Print Network [OSTI]

    Almor, Amit

    in the United States, accounting for 16.3% (50.5 million/310 million) of the US population in 2010 and 0.3% per year among women, while cancer death rates declined by 2.3% per year in men and 1.4% per year in women. Hispanics have lower incidence and death rates than non-Hispanic whites for all cancers

  20. Coupling Multi-Component Models with MPH on Distributed Memory Computer Architectures

    E-Print Network [OSTI]

    He, Yun; Ding, Chris

    2005-01-01

    Among these, NASA’s Earth System Models Framework (ESMF) [to facilitate coupling earth system model components and to

  1. The ABCs of Getting Your ZZZs Steven D. Brass, MD MPH MBA

    E-Print Network [OSTI]

    Leistikow, Bruce N.

    : ­ Memory consolidation ­ Immune system ­ Recharge energy for the day ­ Growth and development Why do we Medicine Clinic UC Davis Health System November 18, 2014 #12;What you will learn: · Why do we sleep? · How of Sleep Medicine, Westchester, IL #12;Why do we dream? · Everyone dreams several times a night · Dreaming

  2. MASTER OF PUBLIC HEALTH (MPH) DISTANCE PROGRAM www.usask.ca/sph

    E-Print Network [OSTI]

    Saskatchewan, University of

    at the University of Saskatchewan (U of S) is now able to reach out into Aboriginal, remote and rural communities, including biological, physical and chemical factors that affect the health of a community. 4. Health to build public health capacity within these communities so they are better able to meet the needs

  3. Spatio-temporal Trends of Air Quality in Southwestern Pennsylvania in the 2000s Drew Michanowicz, MPH, CPH1,2, Kyle Ferrar, MPH1,2, Samantha Malone, MPH, CPH1,2, Ravi Sharma, Ph.D.1,3, Conrad Volz, DrPH, MPH1,2, and John Graham, PhD4

    E-Print Network [OSTI]

    Sibille, Etienne

    numerous source types and constituents, e.g., SO2 and NOx. In evaluating measured air pollution, source, Indiana, Lawrence, Washington, and Westmoreland) Absolute measures comparisons of air pollution-temporal analysis to evaluate air pollution in comparison to regional and national trends over the previous decade

  4. Conrad (Dan) Volz, DrPH, MPH Department of Environmental and Occupational Health,

    E-Print Network [OSTI]

    Sibille, Etienne

    of Pittsburgh, Graduate School of Public Health, cdv5@pitt.edu Director- Center for Healthy Environments://fractracker.org http://data.fractracker.org Marcellus Shale Gas Extraction; Public Health Impacts and Visualizations Associated with Intense Marcellus Shale Gas Production 1. Community and behavioral health impacts. 2

  5. Tufts University School of Dental Medicine Combined DMD/MPH Program

    E-Print Network [OSTI]

    Dennett, Daniel

    and Environmental Health 1.0 Summer Changing Health Behaviors Healthcare Organization: Budgeting and Management 1 Planning Changing Health Behaviors Healthcare Organization: Budgeting and Management 2 Electives (0 Forgiveness: http://www.studentaid.ed.gov/repay-loans/forgiveness-cancellation/charts/public- service Contact

  6. HIV/AIDS in African-Americans Christopher Evans, MD/MPH

    E-Print Network [OSTI]

    Chapman, Michael S.

    of Medicine Oregon Health and Science University #12;Disclosure I have no actual or potential conflict of interest in relation to this program/presentation #12;"Of all the forms of inequality, injustice in health in particular. 2005 Nationwide survey of African-Americans 26% believe HIV was made in a US government lab 15

  7. Author's Copy: J.B. Bancroft, A. Morrison, G. Lachapelle, Validation of GNSS under 500,000 V Direct Current (DC) transmission lines, Computers and Electronics in Agriculture, Volume 83, April 2012, Pages 58-67, ISSN 0168-1699, 10.1016/j.compag.2012.01.013

    E-Print Network [OSTI]

    Calgary, University of

    Current (DC) transmission lines, Computers and Electronics in Agriculture, Volume 83, April 2012, Pages 58 Validation of GNSS under 500,000 Volt Direct Current (DC) Transmission Lines J.B. Bancroft*, A. Morrison machinery. Direct current (DC) and Alternating Current (AC) transmission lines overhead are often suspected

  8. 267 Employers International

    E-Print Network [OSTI]

    Missouri-Rolla, University of

    &T AVG. GRADUATE STARTING SALARY S&T AVG. UNDERGRAD STARTING SALARY ARILKSTX Career GE Aviation Mo. Dept. of Conservation Toyota Motor Engineering S&T AVG. UNDERGRAD MONTHLY SALARY S&T AVG. GRADUATE MONTHLY SALARY S&T AVG. UNDERGRAD MONTHLY SALARY S&T AVG. GRADUATE MONTHLY SALARY

  9. Solar Decathlon Visitors Guide 2011, National Mall, West Potomac Park, Washington, D.C., September 23 - October 2, 2011 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-09-01

    Guide to the student-designed houses, ten contests, exhibits, and workshops of the U.S. Department of Energy 2011 Solar Decathlon, held in Washington, D.C., from September 23 through October 2, 2011. Teams of college students designed and built the solar-powered houses on display here. They represent 13 U.S. states, five countries, and four continents. Now the teams are rising to the challenge by competing in 10 contests over nine days, with the championship trophy on the line. This is their time to shine. The 2011 teams may share a common goal - to design and build the best energy-efficient house powered by the sun - but their strategies are different. One house is made of precast concrete, while another 'dances' in response to its environment. Another house is meant to sit atop a building, proving the sky's the limit for energy innovation. Whatever your idea of sustainable living may be, you are bound to find it at the Solar Decathlon.

  10. Report of a workshop on nuclear forces and nonproliferation Woodrow Wilson international center for scholars, Washington, DC October 28, 2010

    SciTech Connect (OSTI)

    Pilat, Joseph F [Los Alamos National Laboratory

    2010-12-08

    A workshop sponsored by the Los Alamos National Laboratory in cooperation with the Woodrow Wilson International Center for Scholars was held at the Wilson Center in Washington, DC, on October 28, 2010. The workshop addressed evolving nuclear forces and their impacts on nonproliferation in the context of the new strategic environment, the Obama Administration's Nuclear Posture Review and the 2010 NPT Review Conference. The discussions reflected the importance of the NPR for defining the role of US nuclear forces in dealing with 21st century threats and providing guidance for National Nuclear Security Administration (NNSA) and Department of Defense (DoD) programs and, for many but not all participants, highlighted its role in the successful outcome of the NPT RevCon. There was widespread support for the NPR and its role in developing the foundations for a sustainable nuclear-weapon program that addresses nuclear weapons, infrastructure and expertise in the broader nonproliferation, disarmament and international security contexts. However, some participants raised concerns about its implementation and its long-term effectiveness and sustainability.

  11. Positive field-cooled dc susceptibility in granular superconductors interpreted through numerical simulations on a simple Josephson-junction-array model

    SciTech Connect (OSTI)

    Auletta, C.; Raiconi, G.; De Luca, R.; Pace, S.

    1995-05-01

    We have performed numerical simulations of a field-cooled dc susceptibility experiment carried out for granular superconductors by modeling these systems with a simple Josephson-junction array proposed by the authors. By this analysis the temperature dependence of the positive field-cooled susceptibility at very low values of the applied magnetic field, observed by Braunisch {ital et} {ital al}. [Phys. Rev. Lett. 68, 1908 (1992)] for some ceramic superonductors, has been reproduced and interpreted.

  12. U.S. Department of Energy Hydrogen and Fuel Cells Program 2014 Annual Merit Review and Peer Evaluation Report: June 16-20, 2014, Washington, D.C.

    SciTech Connect (OSTI)

    Not Available

    2014-10-01

    The fiscal year (FY) 2014 U.S. Department of Energy (DOE) Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Meeting (AMR), in conjunction with DOE's Vehicle Technologies Office AMR, was held from June 16-20, 2014, at the Washington Marriott Wardman Park in Washington, D.C. This report is a summary of comments by AMR peer reviewers about the hydrogen and fuel cell projects funded by DOE's Office of Energy Efficiency and Renewable Energy (EERE).

  13. DC power supply for charging of a 12 KV 200 KJ energy storage capacitor battery of a 500 KA pulse system for the magnetic horn and reflectors of the CERN neutrino beam

    E-Print Network [OSTI]

    Langeseth, B

    1968-01-01

    DC power supply for charging of a 12 KV 200 KJ energy storage capacitor battery of a 500 KA pulse system for the magnetic horn and reflectors of the CERN neutrino beam

  14. DRAFT - DOE O 350.2C, Use of Management and Operating or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C. Area

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    The Order establishes policies and procedures for managing DOE and NNSA management and operating (M&O) contractors and other facility management contractor employees assigned to the Washington, D.C., area.

  15. DC Power Distribution Systems 

    E-Print Network [OSTI]

    Savage, P.

    2012-01-01

    - A FLEXIBLE ALTERNATIVE ..OR ELECTRICAL POWER SUPPLY S. D. REYNOLDS Manager of Industrial Marketing & Services Tennessee Valley Authority Chattanooga, Tennessee ABSTRACT In an increasingly competitive operating environment, utilities must... place greater emphasis on developing programs that benefit the customer while at the same time benefiting the utility. Economy Surplus Power (ESP) is such a program. ESP offers industrial customers attractively priced power supply arrangements based...

  16. Building Scale DC Microgrids

    E-Print Network [OSTI]

    Marnay, Chris

    2013-01-01

    in likely future adoption patterns of microgrids.chairs the annual Symposium on Microgrids, and is Convenorof the CIGRÉ C6.22 Microgrids Evolution Roadmap Working

  17. Building Scale DC Microgrids

    E-Print Network [OSTI]

    Marnay, Chris

    2013-01-01

    CHP, which can improve overall efficiency significantly. In many climates, using the waste heat to cool buildings

  18. RES D.C.

    Broader source: Energy.gov [DOE]

    The National Center for American Indian Enterprise Development is hosting Reservation Economic Summit (RES), a four-day event that provides Native American businesses and entrepreneurs with the tools they need to be successful.

  19. RES D.C.

    Office of Energy Efficiency and Renewable Energy (EERE)

    The National Center for American Indian Enterprise Development is hosting Reservation Economic Summit (RES), a four-day event that provides Native American businesses and entrepreneurs with the...

  20. D.C.

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding inCustomer-Comments Sign InTAMUiv e in to LChen*, A.Future

  1. DC Circuits - Main Menu

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding inCustomer-Comments Sign InTAMUiv e in663 DARHTJDA7:530 By

  2. I ' Washington, DC'

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE-SessionsSouth DakotaRobbins and MyersHr. Anthony V. Andolina: l ._._,I:'

  3. Washington, DC,20585

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE-SessionsSouth DakotaRobbins and700, 1. .&. ' , cMarch 20,WJLP-~ . '-WQl

  4. Washington, DC.20585

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE-SessionsSouth DakotaRobbins and700, 1. .&. ' , cMarch 20,WJLP-~ . '-WQl. .

  5. Washington. DC,20585

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE-SessionsSouth DakotaRobbins and700, 1. .&. ' , cMarch 20,WJLP-~ .

  6. Washington. DC.20585'

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE-SessionsSouth DakotaRobbins and700, 1. .&. ' , cMarch 20,WJLP-~ .Department

  7. Washingtori, DC.20585

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE-SessionsSouth DakotaRobbins and700, 1. .&. ' , cMarch 20,WJLP-~

  8. Tobin-DC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With U.S.Week DayDr.Theories81 to 1990Be PreseRted atTo: Ms.

  9. article_dc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLos Alamos verifiesValidation ofUV-RSS SpectralGOES &armed forces5

  10. Initial phase zone for phase locking to the resonance, using “main condition” of phase stability in DC-biased single-sided multipactor

    SciTech Connect (OSTI)

    Mostajeran, M., E-mail: mostajeran@yazd.ac.ir [Faculty of Physics, Yazd University, P.O. Box 89195-741, Yazd (Iran, Islamic Republic of)

    2014-05-15

    In the present work, the concept of accurate phase stability is employed to study a DC-biased single-sided multipactor. A “main condition” of phase stability was introduced in our previous studies of two-sided multipactors [M. Mostajeran, J. Instrum. 8, P04024 (2013); M. Mostajeran and M. Lamehi Rachti, Nucl. Instrum. Methods Phys. Res. A 615, 1–5 (2010)]. Using the same condition and assuming zero initial velocity for the secondary electrons, a regime of multipactors outside the resonance zones is found. The theoretical results are then verified by numerical simulation.

  11. Washington DC Reliability Requirements and the Need to Operate Mirant's Potomac River Generation Station to Support Local Area Reliability.pdf

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirley Ann Jackson About1996HowFOAShowingFuel EfficiencyWashington , DC 20585 April 15, 2013

  12. Department of Electrical Engineering and Computer Science MASSACHUSETTS INSTITUTE OF TECHNOLOGY

    E-Print Network [OSTI]

    could occur, or "No" otherwise.) A. Transaction 1: avg = SELECT AVG(salary) FROM emp WHERE dept = 'eecs' SELECT name FROM emp WHERE salary > avg AND dept = 'eecs' Transaction 2: UPDATE emp SET salary = salary * 1.1 Could exhibit the phantom problem: Yes No B. Transaction 1: avg = SELECT AVG(salary) FROM emp

  13. How the “main condition” of phase stability can explain the effect of the velocity deviation of secondary electrons in DC-biased single-sided multipactors

    SciTech Connect (OSTI)

    Mostajeran, M.

    2014-11-15

    In this work, a “main condition” for phase stability has been employed to investigate the effects of the velocity deviation of the electrons in DC-biased single-sided multipactors (MPs). In a previous study [M. Mostajeran, Phys. Plasmas 21, 053108 (2014)], a stability equation was derived, where the secondary electron was assumed to have zero initial velocity and the phase deviation from the resonant phase was considered. In this work, both deviations in phase and velocity from the resonant condition are taken into account, assuming nonzero initial velocity for the secondary electrons. Using the main condition for stability, it is shown that MP discharge can rise in situations, where large velocity deviations from initial velocity and large phase deviations from resonant phase exist. This is contrary to what can be predicted on the basis of the “simple stability condition.” This result is further confirmed by numerical simulations.

  14. Coulomb cluster explosion boosted by a quasi-dc pulse -- diagnostic tool and ultimate test of laser fusion efficiency in clusters

    E-Print Network [OSTI]

    Kaplan, A E

    2015-01-01

    To greatly enhance output of nuclear fusion produced neutrons in a laser-initiated Coulomb explosion of Deuterium clusters, we propose to subject the ions produced by the explosion to quasi-dc electrical pulse, to accelerate them to the energies where the D+D collision cross-section is the highest. With D+ ions shepherded then to bombard a Deuterium-rich solid-state cathode, this allows one to solve a few problems simultaneously by (a) completely removing electron cloud hindering the Coulomb explosion of ionic core, (b) utilizing up to $100 \\%$ of the cluster ions to collide with the high-density packed nuclei, and (c) reaching maximum cross-section of neutron production in a single D+D collision. We also consider the use of E-pulse acceleration for diagnostic purposes.

  15. 2012 IEEE. Reprinted, with permission, from B.J. Williamson, M.A. Redfern and R.K. Aggarwal, Project Edison: SMART-DC, IEEE PES Innovative Smart Grid Technologies (ISGT-EUROPE 2011) December 2011. This material is posted here with permission of the IEEE.

    E-Print Network [OSTI]

    Burton, Geoffrey R.

    , intelligent demand management, micro-generation, smart grid. I. INTRODUCTION N the late 19th century, Nikola, Project Edison: SMART-DC, IEEE PES Innovative Smart Grid Technologies (ISGT-EUROPE 2011) December 2011 of a DC network. Demand offsetting using the flexibility of energy storage has been demonstrated with real

  16. Request to Cancel Department of Energy (DOE) Order 350.2B, Use of Management and Operating or other Facility Management Contractor Employees for Services to DOE in the Washington D.C. Area

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-11-23

    DOE is canceling this directive and its associated DOE-wide mandated requirements in recognition of Departmental management and oversight improvements of Headquarters sponsored assignments to the Washington D.C. area and opting to implement as program specific risk based management approach to these actions.

  17. The Science of Hurricanes Typical eye diameter ~20 miles

    E-Print Network [OSTI]

    Miami, University of

    #12;The Science of Hurricanes #12;#12;Typical eye diameter ~20 miles Typical hurricane diameter-View of a Hurricane #12;Day 0, Disturbance Day 1, 35mph Depression Day 2, 46mph Tropical Storm Day 3, 63mph Tropical Storm Day 4, 92mph Hurricane Day 5, 127mph Hurricane Day 6, 150mph Hurricane Day 7, 144mph Hurricane Day

  18. Influence of a Weak Field of Pulsed DC Electricity on the Behavior and Incidence of Injury in Adult Steelhead and Pacific Lamprey, Final Report.

    SciTech Connect (OSTI)

    Mesa, Matthew

    2009-02-13

    Predation by pinnipeds, such as California sea lions Zalophus californianus, Pacific harbor seals Phoca vitulina, and Stellar sea lions Eumetopias jubatus on adult Pacific salmon Oncorhynchus spp in the lower Columbia River has become a serious concern for fishery managers trying to conserve and restore runs of threatened and endangered fish. As a result, Smith-Root, Incorporated (SRI; Vancouver, Washington), manufacturers of electrofishing and closely-related equipment, proposed a project to evaluate the potential of an electrical barrier to deter marine mammals and reduce the amount of predation on adult salmonids (SRI 2007). The objectives of their work were to develop, deploy, and evaluate a passive, integrated sonar and electric barrier that would selectively inhibit the upstream movements of marine mammals and reduce predation, but would not injure pinnipeds or impact anadromous fish migrations. However, before such a device could be deployed in the field, concerns by regional fishery managers about the potential effects of such a device on the migratory behavior of Pacific salmon, steelhead O. mykiss, Pacific lampreys Entoshpenus tridentata, and white sturgeon Acipenser transmontanus, needed to be addressed. In this report, we describe the results of laboratory research designed to evaluate the effects of prototype electric barriers on adult steelhead and Pacific lampreys. The effects of electricity on fish have been widely studied and include injury or death (e.g., Sharber and Carothers 1988; Dwyer et al. 2001; Snyder 2003), physiological dysfunction (e.g., Schreck et al. 1976; Mesa and Schreck 1989), and altered behavior (Mesa and Schreck 1989). Much of this work was done to investigate the effects of electrofishing on fish in the wild. Because electrofishing operations would always use more severe electrical settings than those proposed for the pinniped barrier, results from these studies are probably not relevant to the work proposed by SRI. Field electrofishing operations typically use high voltage and amperage settings and a variety of waveforms, pulse widths (PW), and pulse frequencies (PF), depending on conditions and target species. For example, when backpack electrofishing for trout in a small stream, one might use settings such as 500 V pulsed DC, a PW of 1 ms, and a PF of 60 Hz. In contrast, the electrical barrier proposed by SRI will produce electrical conditions significantly lower than those used in electrofishing, particularly for PW and PF (e.g., PW ranging from 300-1,000 {micro}s and PF from 2-3 Hz). Further, voltage gradients (in V/cm) are predicted to be lower in the electric barrier than those produced during typical electrofishing. Although the relatively weak, pulsed DC electric fields to be produced by the barrier may be effective at deterring pinnipeds, little, if anything, is known about the effects of such low intensity electrical fields on fish behavior. For this research, we evaluated the effects of weak, pulsed DC electric currents on the behavior of adult steelhead and Pacific lamprey and the incidence of injury in steelhead only. In a series of laboratory experiments, we: (1) documented the rate of passage of fish over miniature, prototype electric barriers when they were on and off; (2) determined some electric thresholds beyond which fish would not pass over the barrier; and (3) assessed the incidence and severity of injury in steelhead exposed to relatively severe electrical conditions. The results of this study should be useful for making decisions about whether to install electrical barriers in the lower Columbia River, or elsewhere, to reduce predation on upstream migrating salmonids and other fishes by marine pinnipeds.

  19. Nanosecond pulsed electric fields (nsPEFs) low cost generator design using power MOSFET and Cockcroft-Walton multiplier circuit as high voltage DC source

    SciTech Connect (OSTI)

    Sulaeman, M. Y.; Widita, R.

    2014-09-30

    Purpose: Non-ionizing radiation therapy for cancer using pulsed electric field with high intensity field has become an interesting field new research topic. A new method using nanosecond pulsed electric fields (nsPEFs) offers a novel means to treat cancer. Not like the conventional electroporation, nsPEFs able to create nanopores in all membranes of the cell, including membrane in cell organelles, like mitochondria and nucleus. NsPEFs will promote cell death in several cell types, including cancer cell by apoptosis mechanism. NsPEFs will use pulse with intensity of electric field higher than conventional electroporation, between 20–100 kV/cm and with shorter duration of pulse than conventional electroporation. NsPEFs requires a generator to produce high voltage pulse and to achieve high intensity electric field with proper pulse width. However, manufacturing cost for creating generator that generates a high voltage with short duration for nsPEFs purposes is highly expensive. Hence, the aim of this research is to obtain the low cost generator design that is able to produce a high voltage pulse with nanosecond width and will be used for nsPEFs purposes. Method: Cockcroft-Walton multiplier circuit will boost the input of 220 volt AC into high voltage DC around 1500 volt and it will be combined by a series of power MOSFET as a fast switch to obtain a high voltage with nanosecond pulse width. The motivation using Cockcroft-Walton multiplier is to acquire a low-cost high voltage DC generator; it will use capacitors and diodes arranged like a step. Power MOSFET connected in series is used as voltage divider to share the high voltage in order not to damage them. Results: This design is expected to acquire a low-cost generator that can achieve the high voltage pulse in amount of ?1.5 kV with falltime 3 ns and risetime 15 ns into a 50? load that will be used for nsPEFs purposes. Further detailed on the circuit design will be explained at presentation.

  20. FISHES OF THE PIDLIPPINE ISLANDS. By BARTON WARREN EVERMANN. A. MPh.Dand ALVIN SEALE. A. B.

    E-Print Network [OSTI]

    -large and important one. Bacon, Sorsoqon, Luzon.-Sorsogon is the most southern province of Luzon. Bacon is situated of the province, approximately in latitude 120 38' north, longitude 1230 22' east. The collections from Bacon