National Library of Energy BETA

Sample records for mounting ornamental pole

  1. Ocean floor mounting of wave energy converters

    DOE Patents [OSTI]

    Siegel, Stefan G

    2015-01-20

    A system for mounting a set of wave energy converters in the ocean includes a pole attached to a floor of an ocean and a slider mounted on the pole in a manner that permits the slider to move vertically along the pole and rotate about the pole. The wave energy converters can then be mounted on the slider to allow adjustment of the depth and orientation of the wave energy converters.

  2. Propagation of Ornamental Plants. 

    E-Print Network [OSTI]

    DeWerth, A. F.

    1955-01-01

    . Whenever possible, sow the seed of most After the seed have germinated, place th~ Texas ornamentals in flats or pots than container where the seedlings will get an abw directly in the open ground. dance of light. If kept in a shady location, leg...!! weak plants will result. Be sure there are cracks or holes in the bot- tom of the flat or that the hole in the bottom - Water from below whenever the soil becomP of the flower pot is kept open to allow excess water to pass quickly out of the soil...

  3. Mirror mount

    DOE Patents [OSTI]

    Humpal, H.H.

    1987-11-10

    A mirror mount is provided that allows free pitch, yaw and roll motion of the mirror while keeping the location of a point on the surface of the mirror fixed in the rest frame of reference of the mount. Yaw movement is provided by two yaw cylinders that are bearing mounted to provide rotation. Pitch and roll motion is provided by a spherically annular shell that is air bearing mounted to move between a clamp and an upper pedestal bearing. The centers of curvature of the spherical surfaces of the shell lie upon the point. Pitch motion and roll motion are separately and independently imparted to mirror by a pair of pitch paddles and a pair of roll paddles that are independently and separately moved by control rods driven by motors. 5 figs.

  4. Mirror mount

    DOE Patents [OSTI]

    Kuklo, T.C.; Bender, D.A.

    1994-10-04

    A unique lens or mirror mount having adjustable constraints at two key locations to allow for ''X'' and ''Y'' tilts of the mirror only is disclosed. The device uses two pair of flexures of a type such that the pivots of the mirror gimble are rigidly fixed in all planes allowing the device to have zero stacking tolerance and zero wear over time. 4 figs.

  5. Magnet pole tips

    DOE Patents [OSTI]

    Thorn, Craig E. (Wading River, NY); Chasman, Chellis (Setauket, NY); Baltz, Anthony J. (Coram, NY)

    1984-04-24

    An improved magnet which more easily provides a radially increasing magnetic field, as well as reduced fringe field and requires less power for a given field intensity. The subject invention comprises a pair of spaced, opposed magnetic poles which further comprise a pair of pole roots, each having a pole tip attached to its center. The pole tips define the gap between the magnetic poles and at least a portion of each pole tip is separated from its associated pole root. The separation begins at a predetermined distance from the center of the pole root and increases with increasing radial distance while being constant with azimuth within that portion. Magnets in accordance with the subject invention have been found to be particularly advantageous for use in large isochronous cyclotrons.

  6. Magnet pole tips

    DOE Patents [OSTI]

    Thorn, C.E.; Chasman, C.; Baltz, A.J.

    1981-11-19

    An improved magnet more easily provides a radially increasing magnetic field, as well as reduced fringe field and requires less power for a given field intensity. The subject invention comprises a pair of spaced, opposed magnetic poles which further comprise a pair of pole roots, each having a pole tip attached to its center. The pole tips define the gap between the magnetic poles and at least a portion of each pole tip is separated from its associated pole root. The separation begins at a predetermined distance from the center of the pole root and increases with increasing radial distance while being constant with azimuth within that portion. Magnets in accordance with the subject invention have been found to be particularly advantageous for use in large isochronous cyclotrons.

  7. Montenegro Greenhouse Ornamental Production Workshop October 2007

    E-Print Network [OSTI]

    Lieth, J. Heinrich

    Montenegro Greenhouse Ornamental Production Workshop October 2007 Heiner Lieth Plant Sciences of Montenegro is promotion of the their greenhouse flower production industry. At the time when the program and Montenegro. #12;Montenegro Greenhouse Ornamental Production Workshop October 2007 Radionica za proizvodnju

  8. Pioneering the New Grid: Pole-mounted Solar

    Broader source: Energy.gov [DOE]

    Innovative new systems not only generate energy through a solar panel that feeds into the grid, but they are also equipped with communications capabilities.

  9. PV module mounting method and mounting assembly

    DOE Patents [OSTI]

    Lenox, Carl J.S.; Johnson, Kurt M.

    2013-04-23

    A method for mounting PV modules to a deck includes selecting PV module layout pattern so that adjacent PV module edges are spaced apart. PV mounting and support assemblies are secured to the deck according to the layout pattern using fasteners extending into the deck. The PV modules are placed on the PV mounting and support assemblies. Retaining elements are located over and secured against the upper peripheral edge surfaces of the PV modules so to secure them to the deck with the peripheral edges of the PV modules spaced apart from the deck. In some examples a PV module mounting assembly, for use on a shingled deck, comprises flashing, a base mountable on the flashing, a deck-penetrating fastener engageable with the base and securable to the deck so to secure the flashing and the base to the shingled deck, and PV module mounting hardware securable to the base.

  10. Magnetic core mounting system

    DOE Patents [OSTI]

    Ronning, Jeffrey J. (Fishers, IN)

    2002-01-01

    A mounting apparatus for an electromagnetic device such as a transformer of inductor includes a generally planar metallic plate as a first heat sink, and a metallic mounting cup as a second heat sink. The mounting cup includes a cavity configured to receive the electromagnetic device, the cavity being defined by a base, and an axially-extending annular sidewall extending from the base to a flange portion of the mounting cup. The mounting cup includes first and second passages for allowing the leads of first and second windings of the electromagnetic device to be routed out of the cavity. The cavity is filled with a polyurethane potting resin, and the mounting cup, including the potted electromagnetic device, is mounted to the plate heat sink using fasteners. The mounting cup, which surrounds the electromagnetic device, in combination with the potting resin provides improved thermal transfer to the plate heat sink, as well as providing resistance to vibration and shocks.

  11. The Purgatory of Pole Dancing

    E-Print Network [OSTI]

    Meepos, Dana

    2012-01-01

    THE PURGATORY OF POLE DANCING Dana Meepos* I.Id. THE PURGATORY OF POLE DANCING courts. 5 5 Furthermore,J. , concurring). THE PURGATORY OF POLE DANCING tice Scalia

  12. Photovoltaic module mounting system

    DOE Patents [OSTI]

    Miros, Robert H. J. (Fairfax, CA); Mittan, Margaret Birmingham (Oakland, CA); Seery, Martin N. (San Rafael, CA); Holland, Rodney H. (Novato, CA)

    2012-04-17

    A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

  13. Photovoltaic module mounting system

    SciTech Connect (OSTI)

    Miros, Robert H. J.; Mittan, Margaret Birmingham; Seery, Martin N; Holland, Rodney H

    2012-09-18

    A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

  14. 42 Ornamental OUTLOOK March 2008 By Cliff Sadof, Tamara Benjamin,

    E-Print Network [OSTI]

    Pittendrigh, Barry

    42 Ornamental OUTLOOK · March 2008 By Cliff Sadof, Tamara Benjamin, and Eduardo Hidalgo FF loridaEduardoHidalgoPhotocourtesyofCliffSadof #12;44 Ornamental OUTLOOK · March 2008 Plant Quality group at the Port of Miami took his team

  15. High bandwidth optical mount

    DOE Patents [OSTI]

    Bender, D.A.; Kuklo, T.

    1994-11-08

    An optical mount, which directs a laser beam to a point by controlling the position of a light-transmitting optic, is stiffened so that a lowest resonant frequency of the mount is approximately one kilohertz. The optical mount, which is cylindrically-shaped, positions the optic by individually moving a plurality of carriages which are positioned longitudinally within a sidewall of the mount. The optical mount is stiffened by allowing each carriage, which is attached to the optic, to move only in a direction which is substantially parallel to a center axis of the optic. The carriage is limited to an axial movement by flexures or linear bearings which connect the carriage to the mount. The carriage is moved by a piezoelectric transducer. By limiting the carriage to axial movement, the optic can be kinematically clamped to a carriage. 5 figs.

  16. Stable mirror mount

    DOE Patents [OSTI]

    Cutburth, R.W.

    1983-11-04

    An improved mirror mount assembly is disclosed. The mirror mount assembly provides a post assembly slidable in a Y-axis orientation and a nut plate assembly slidable in an X-axis orientation and means for simultaneously locking said post assembly and said key assembly in a fixed position.

  17. Optoelectronic Mounting Structure

    DOE Patents [OSTI]

    Anderson, Gene R. (Albuquerque, NM); Armendariz, Marcelino G. (Albuquerque, NM); Baca, Johnny R. F. (Albuquerque, NM); Bryan, Robert P. (Albuquerque, NM); Carson, Richard F. (Albuquerque, NM); Chu, Dahwey (Albuquerque, NM); Duckett, III, Edwin B. (Albuquerque, NM); McCormick, Frederick B. (Albuquerque, NM); Peterson, David W. (Sandia Park, NM); Peterson, Gary D. (Albuquerque, NM); Reber, Cathleen A. (Corrales, NM); Reysen, Bill H. (Lafayette, CO)

    2004-10-05

    An optoelectronic mounting structure is provided that may be used in conjunction with an optical transmitter, receiver or transceiver module. The mounting structure may be a flexible printed circuit board. Thermal vias or heat pipes in the head region may transmit heat from the mounting structure to the heat spreader. The heat spreader may provide mechanical rigidity or stiffness to the heat region. In another embodiment, an electrical contact and ground plane may pass along a surface of the head region so as to provide an electrical contact path to the optoelectronic devices and limit electromagnetic interference. In yet another embodiment, a window may be formed in the head region of the mounting structure so as to provide access to the heat spreader. Optoelectronic devices may be adapted to the heat spreader in such a manner that the devices are accessible through the window in the mounting structure.

  18. Pole pulling apparatus and method

    DOE Patents [OSTI]

    McIntire, Gary L. (12 Honeybee La., Idaho Falls, ID 83402)

    1989-01-01

    An apparatus for removal of embedded utility-type poles which removes the poles quickly and efficiently from their embedded position without damage to the pole or surrounding structures. The apparatus includes at least 2 piston/cylinder members equally spaced about the pole, and a head member affixed to the top of each piston. Elongation of the piston induces rotation of the head into the pole to increase the gripping action and reduce slippage. Repeated actuation and retraction of the piston and head member will "jack" the pole from its embedded position.

  19. Flag Pole - 10 

    E-Print Network [OSTI]

    Unknown

    2006-01-01

    enhancements that can be made to overcome these shortcomings. We next propose pole discovery and impedance computation methods that address these shortcomings by exploring only a certain region of interest in the s-plane. The reduced time and memory complexity...

  20. Cluster Observations with the South Pole Telescope

    E-Print Network [OSTI]

    Plagge, Thomas Jeffrey

    2009-01-01

    The South Pole Telescope during the last stages ofwater vapor at the South Pole relative to two otherSZ Survey Instrument . 3 The South Pole Telescope Observing

  1. Single phase two pole/six pole motor

    DOE Patents [OSTI]

    Kirschbaum, H.S.

    1984-09-25

    A single phase alternating current two pole/six pole motor is provided with a main stator winding having six coils disposed unequally around the periphery of the machine. These coils are divided into two groups. When these groups are connected such that their magnetomotive forces are additive, two pole motor operation results. When the polarity of one of the groups is then reversed, six pole motor operation results. An auxiliary stator winding which is similar to the main stator winding is displaced from the main stator winding by 90 electrical degrees on a two pole basis. 12 figs.

  2. Mounting for ceramic scroll

    DOE Patents [OSTI]

    Petty, Jack D. (Indianapolis, IN)

    1993-01-01

    A mounting for a ceramic scroll on a metal engine block of a gas turbine engine includes a first ceramic ring and a pair of cross key connections between the first ceramic ring, the ceramic scroll, and the engine block. The cross key connections support the scroll on the engine block independent of relative radial thermal growth and for bodily movement toward an annular mounting shoulder on the engine. The scroll has an uninterrupted annular shoulder facing the mounting shoulder on the engine block. A second ceramic ring is captured between mounting shoulder and the uninterrupted shoulder on the scroll when the latter is bodily shifted toward the mouting shoulder to define a gas seal between the scroll and the engine block.

  3. Sexual ornaments, body morphology, and swimming performance in naturally hybridizing swordtails (teleostei: xiphophorus) 

    E-Print Network [OSTI]

    Johnston, James B.; Macedo, Danielle C.; Passow, Courtney N.; Rosenthal, Gil G.

    2014-10-15

    Determining the costs of sexual ornaments is complicated by the fact that ornaments are often integrated with other, non-sexual traits, making it difficult to dissect the effect of ornaments independent of other aspects of the phenotype...

  4. Six pole/eight pole single-phase motor

    DOE Patents [OSTI]

    Kirschbaum, Herbert S. (Asheville, NC)

    1984-01-01

    A single phase alternating current electric motor is provided with a main stator winding having two coil groups which are connected to form eight poles for eight-pole operation and to form six poles for six-pole operation. Each group contains four series connected coil elements with each element spanning approximately one-seventh of the periphery of the machine. The coil groups are spaced 180 mechanical degrees apart such that each end coil of one group overlaps one of the end coils of the other group. An auxiliary stator winding having two coil groups with the same relative angular displacement as the main stator winding coil groups is included.

  5. Housing And Mounting Structure

    DOE Patents [OSTI]

    Anderson, Gene R. (Albuquerque, NM); Armendariz, Marcelino G. (Albuquerque, NM); Baca, Johnny R.F. (Albuquerque, NM); Bryan, Robert P. (Albuquerque, NM); Carson, Richard F. (Albuquerque, NM); Duckett, III, Edwin B. (Albuquerque, NM); McCormick, Frederick B. (Albuquerque, NM); Miller, Gregory V. (Kansas City, MO); Peterson, David W. (Sandia Park, NM); Smith, Terrance T. (Albuquerque, NM)

    2005-03-08

    This invention relates to an optical transmitter, receiver or transceiver module, and more particularly, to an apparatus for connecting a first optical connector to a second optical connector. The apparatus comprises: (1) a housing having at least a first end and at least a second end, the first end of the housing capable of receiving the first optical connector, and the second end of the housing capable of receiving the second optical connector; (2) a longitudinal cavity extending from the first end of the housing to the second end of the housing; and (3) an electromagnetic shield comprising at least a portion of the housing. This invention also relates to an apparatus for housing a flexible printed circuit board, and this apparatus comprises: (1) a mounting structure having at least a first surface and a second surface; (2) alignment ridges along the first and second surfaces of the mounting structure, the alignment ridges functioning to align and secure a flexible printed circuit board that is wrapped around and attached to the first and second surfaces of the mounting structure; and (3) a series of heat sink ridges adapted to the mounting structure, the heat sink ridges functioning to dissipate heat that is generated from the flexible printed circuit board.

  6. Computer Graphics and Geometric Ornamental Design Craig S. Kaplan

    E-Print Network [OSTI]

    Waterloo, University of

    Computer Graphics and Geometric Ornamental Design Craig S. Kaplan A dissertation submitted by Craig S. Kaplan and have found that it is complete and satisfactory in all respects, and that any and Geometric Ornamental Design by Craig S. Kaplan Chair of Supervisory Committee: Professor David H. Salesin

  7. Helicopter aids transmission pole replacement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Helicopter-aids-transmission-pole-replacement Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects & Initiatives Expand Projects...

  8. Plasma Screen Floating Mount

    DOE Patents [OSTI]

    Eakle, Robert F. (New Ellenton, SC); Pak, Donald J. (Martine, GA)

    2004-10-26

    A mounting system for a flat display screen, particularly a plasma display screen, suspends the screen separately in each of the x-, y- and z-directions. A series of frames located by linear bearings and isolated by springs and dampers allows separate controlled movement in each axis. The system enables the use of relatively larger display screens in vehicles in which plasma screen are subject to damage from vibration.

  9. Lightweight extendable and retractable pole

    DOE Patents [OSTI]

    Warren, J.L.; Brandt, J.E.

    1994-08-02

    A lightweight extendable and retractable telescopic pole is disclosed comprising a plurality of non-metallic telescoping cylinders with sliding and sealing surfaces between the cylinders, a first plug member on the upper end of the smallest cylinder, and a second plug member on the lower end of the largest cylinder, whereby fluid pressure admitted to the largest cylinder will cause the telescoping cylinders to slide relative to one another causing the pole to extend. An elastomeric member connects the first plug member with one of the intermediate cylinders to urge the cylinders back into a collapsed position when the fluid pressure in the cylinders is vented. Annular elastomer members are provided which seal one cylinder to another when the pole is fully extended and further serve to provide a cushion to prevent damage to the cylinders when the pole is urged back into its retractable position by the elastomeric members and the venting of the pressure. A value mechanism associated with the pole is provided to admit a fluid under pressure to the interior of the telescoping cylinders of the pole while pressurizing a pressure relief port having an opening larger than the inlet port in a closed position whereby removal of the pressure on the relief port will cause the relief port to open to quickly lower the pressure in the interior of the telescoping cylinders to thereby assist in the rapid retraction of the extended pole. 18 figs.

  10. Six pole/eight pole single-phase motor

    DOE Patents [OSTI]

    Kirschbaum, H.S.

    1984-07-31

    A single phase alternating current electric motor is provided with a main stator winding having two coil groups which are connected to form eight poles for eight-pole operation and to form six poles for six-pole operation. Each group contains four series connected coil elements with each element spanning approximately one-seventh of the periphery of the machine. The coil groups are spaced 180 mechanical degrees apart such that each end coil of one group overlaps one of the end coils of the other group. An auxiliary stator winding having two coil groups with the same relative angular displacement as the main stator winding coil groups is included. 10 figs.

  11. Quarkonia and the Pole Mass

    E-Print Network [OSTI]

    A. H. Hoang; M. C. Smith; T. Stelzer; S. Willenbrock

    1999-04-07

    The pole mass of a heavy quark is ambiguous by an amount of order $\\Lambda_{QCD}$. We show that the heavy-quark potential, $V(r)$, is similarly ambiguous, but that the total static energy, $2M_{pole}+V(r)$, is unambiguous when expressed in terms of a short-distance mass. This implies that the extraction of a short-distance mass from the quarkonium spectrum is free of an ambiguity of order $\\Lambda_{QCD}$, in contrast with the pole mass.

  12. Ornament is dangerous : a wildfire hazard center for Los Angeles

    E-Print Network [OSTI]

    Trimble, Matthew Alexander

    2008-01-01

    There is no such thing as an unadorned building. While the the role and relevance of ornament in architecture has been criticized for centuries, its position has been, for the most part, supported as essential to architecture. ...

  13. Single phase four pole/six pole motor

    DOE Patents [OSTI]

    Kirschbaum, H.S.

    1984-10-09

    A single phase alternating current electric motor is provided with a main stator winding having two coil groups each including the series connection of three coils. These coil groups can be connected in series for six pole operation and in parallel for four pole operation. The coils are approximately equally spaced around the periphery of the machine but are not of equal numbers of turns. The two coil groups are identically wound and spaced 180 mechanical degrees apart. One coil of each group has more turns and a greater span than the other two coils. 10 figs.

  14. Assessment of LED Technology in Ornamental Post-Top Luminaires. Sacramento, CA

    SciTech Connect (OSTI)

    Tuenge, J. R.; Bryan, M. M.; Bisbee, D. A.

    2011-12-01

    GATEWAY program report on a demonstration of LED ornamental post-top luminaires in a residential part of Sacramento, CA.

  15. Pole Placement Algorithms ROBERT MAHONY~ UWE

    E-Print Network [OSTI]

    Moore, John Barratt

    Pole Placement Algorithms ROBERT MAHONY~ UWE for Symmetric Realisations HELMKE$ JOHN MOORE a numerical algorithm for deter- mining optimal output feedback gains for the pole place- ment task is well defined even when an exact solution to the pole placement task does not exist. Thus, the proposed

  16. Laboratory Performance Testing of Residential Window Mounted...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Laboratory Performance Testing of Residential Window Mounted Air Conditioners Laboratory Performance Testing of Residential Window Mounted Air Conditioners This presentation was...

  17. CHOOSING POLES SO THAT THE SINGLE-INPUT POLE PLACEMENT PROBLEM IS WELL CONDITIONED

    E-Print Network [OSTI]

    Xu, Hongguo

    CHOOSING POLES SO THAT THE SINGLE-INPUT POLE PLACEMENT PROBLEM IS WELL CONDITIONED VOLKER MEHRMANN, pp. 664­681, July 1998 004 Abstract. We discuss the single-input pole placement problem (SIPP) and analyze how the conditioning of the problem can be estimated and improved if the poles are allowed to vary

  18. CHOOSING POLES SO THAT THE SINGLEINPUT POLE PLACEMENT PROBLEM IS WELL CONDITIONED #

    E-Print Network [OSTI]

    Xu, Hongguo

    CHOOSING POLES SO THAT THE SINGLE­INPUT POLE PLACEMENT PROBLEM IS WELL CONDITIONED # VOLKER Mathematics Vol. 19, No. 3, pp. 664--681, July 1998 004 Abstract. We discuss the single­input pole placement problem (SIPP) and analyze how the conditioning of the problem can be estimated and improved if the poles

  19. Megalocytivirus Infections in Fish, with Emphasis on Ornamental Species1

    E-Print Network [OSTI]

    Watson, Craig A.

    FA182 Megalocytivirus Infections in Fish, with Emphasis on Ornamental Species1 Roy P. E. Yanong (genus) of fish viruses in the family Iridoviridae (the iridoviruses). Megalocytiviruses cause systemic fishes in both cultured and wild stocks. In some disease outbreaks, 100% losses have oc- curred in under

  20. Environmental Horticulture Department Ornamental Plant Identification and Use

    E-Print Network [OSTI]

    Ma, Lena

    Plants for Subtropical Climates. University Press of Florida, Gainesville. (See attached list 11 List 10, review, Quiz 8 Week 12 Lab review, Final Plant ID Exam Rules of behavior: Every societyEnvironmental Horticulture Department Ornamental Plant Identification and Use Lab (ORH 3513L

  1. Solar panel truss mounting systems and methods

    DOE Patents [OSTI]

    Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell; Goodman, Joseph; Nolan, Wade; Pitelka, Taylor; Rahimzadeh, Keyan; Brooks, Bradley; Lohr, Joshua; Crooks, Ryan; Porges, Jamie; Rubin, Daniel

    2015-10-20

    An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the base rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.

  2. Mounting support for a photovoltaic module

    DOE Patents [OSTI]

    Brandt, Gregory Michael; Barsun, Stephan K.; Coleman, Nathaniel T.; Zhou, Yin

    2013-03-26

    A mounting support for a photovoltaic module is described. The mounting support includes a foundation having an integrated wire-way ledge portion. A photovoltaic module support mechanism is coupled with the foundation.

  3. Holding fixture for metallographic mount polishing

    DOE Patents [OSTI]

    Barth, C.H.; Cramer, C.E.

    1997-12-30

    A fixture is described for holding mounted specimens for polishing, having an arm; a body attached to one end of the arm, the body having at least one flange having an opening to accommodate a mounted specimen; and a means applying pressure against the outer surface of the mounted specimen to hold the specimen in contact with the polishing surface. 3 figs.

  4. Holding fixture for metallographic mount polishing

    DOE Patents [OSTI]

    Barth, Clyde H. (Ballston Lake, NY); Cramer, Charles E. (Schenectady, NY)

    1997-01-01

    A fixture for holding mounted specimens for polishing, having an arm; a body attached to one end of the arm, the body having at least one flange having an opening to accommodate a mounted specimen; and a means applying pressure against the outer surface of the mounted specimen to hold the specimen in contact with the polishing surface.

  5. Microtubule tethers at kinetochores and spindle poles : essential mitotic components

    E-Print Network [OSTI]

    Silk, Alain Daniel

    2008-01-01

    focusing mitotic spindle poles by minus end-directed motor1998). Focusing on spindle poles. J Cell Sci 111 (Pt 11),A. (1997). Mitotic spindle poles are organized by structural

  6. Tree-Loop Duality Relation beyond simple poles

    E-Print Network [OSTI]

    Isabella Bierenbaum; Sebastian Buchta; Petros Draggiotis; Ioannis Malamos; German Rodrigo

    2012-11-21

    We develop the Tree-Loop Duality Relation for two- and three-loop integrals with multiple identical propagators (multiple poles). This is the extension of the Duality Relation for single poles and multiloop integrals derived in previous publications. We prove a generalization of the formula for single poles to multiple poles and we develop a strategy for dealing with higher-order pole integrals by reducing them to single pole integrals using Integration By Parts.

  7. Nozzle and shroud assembly mounting structure

    DOE Patents [OSTI]

    Faulder, Leslie J. (San Diego, CA); Frey, deceased, Gary A. (late of Seattle, WA); Nielsen, Engward W. (El Cajon, CA); Ridler, Kenneth J. (San Diego, CA)

    1997-01-01

    The present nozzle and shroud assembly mounting structure configuration increases component life and reduces maintenance by reducing internal stress between the mounting structure having a preestablished rate of thermal expansion and the nozzle and shroud assembly having a preestablished rate of thermal expansion being less than that of the mounting structure. The mounting structure includes an outer sealing portion forming a cradling member in which an annular ring member is slidably positioned. The mounting structure further includes an inner mounting portion to which a hooked end of the nozzle and shroud assembly is attached. As the inner mounting portion expands and contracts, the nozzle and shroud assembly slidably moves within the outer sealing portion.

  8. Nozzle and shroud assembly mounting structure

    DOE Patents [OSTI]

    Faulder, L.J.; Frey, G.A.; Nielsen, E.W.; Ridler, K.J.

    1997-08-05

    The present nozzle and shroud assembly mounting structure configuration increases component life and reduces maintenance by reducing internal stress between the mounting structure having a preestablished rate of thermal expansion and the nozzle and shroud assembly having a preestablished rate of thermal expansion being less than that of the mounting structure. The mounting structure includes an outer sealing portion forming a cradling member in which an annular ring member is slidably positioned. The mounting structure further includes an inner mounting portion to which a hooked end of the nozzle and shroud assembly is attached. As the inner mounting portion expands and contracts, the nozzle and shroud assembly slidably moves within the outer sealing portion. 3 figs.

  9. Dual resolution, vacuum compatible optical mount

    SciTech Connect (OSTI)

    Halpin, John Michael (Tracy, CA)

    2011-10-04

    An optical mount for an optical element includes a mounting plate, a lever arm pivot coupled to mounting plate, and an adjustment plate. The optical mount also includes a flexure pivot mechanically coupling the adjustment plate to the mounting plate and a lever arm. The optical mount further includes a first adjustment device extending from the adjustment plate to make contact with the lever arm at a first contact point. A projection of a line from the first contact point to a pivot point, measured along the lever arm, is a first predetermined distance. The optical mount additionally includes a second adjustment device extending from the adjustment plate to make contact with the lever arm at a second contact point. A projection of a line from the second contact point to the pivot point, measured along the lever arm, is a second predetermined distance greater than the first predetermined distance.

  10. Millimeter Wavelength Brightness Fluctuations of the Atmosphere Above the South Pole

    E-Print Network [OSTI]

    Bussmann, R S; Kuo, C L

    2004-01-01

    We report measurements of the millimeter wavelength brightness fluctuations produced by the atmosphere above the South Pole made with the Arcminute Cosmology Bolometer Array Receiver (ACBAR). The data span the 2002 Austral winter during which ACBAR was mounted on the Viper telescope at the South Pole. We recover the atmospheric signal in the presence of instrument noise by calculating the correlation between signals from distinct elements of the ACBAR bolometer array. With this method, it is possible to measure atmospheric brightness fluctuations with high SNR even under the most stable atmospheric conditions. The observed atmospheric signal is characterized by the parameters of the Komolgorov-Taylor (KT) model, which are the amplitude and power law exponent describing the atmospheric power spectrum, and the two components of the wind angular velocity at the time of the observation. The KT model is typically a good description of the observed fluctuations, and fits to the data produce values of the Komolgorov...

  11. HIPPO (HIAPER Pole-to-Pole Observations) Data from CDIAC's HIPPO Data Archive

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    The HIPPO (HIAPER Pole-to-Pole Observations) study of the carbon cycle and greenhouse gases measured meteorology, atmospheric chemistry, and aerosol constituents along transects from approximately pole-to-pole over the Pacific Ocean. HIPPO flew hundreds of vertical profiles from the ocean/ice surface to as high as the tropopause, at five times during different seasons over a three year period from 2009-2011. HIPPO provides the first high-resolution vertically-resolved global survey of a comprehensive suite of atmospheric trace gases and aerosols pertinent to understanding the carbon cycle and challenging global climate models.

  12. DIRECTIONS AND FACTORIZATIONS OF ZEROS AND POLES IN MULTIVARIABLE SYSTEMS

    E-Print Network [OSTI]

    Skogestad, Sigurd

    DIRECTIONS AND FACTORIZATIONS OF ZEROS AND POLES IN MULTIVARIABLE SYSTEMS K. Havre 1 and S. INTERNAL REPORT ­ June 96. Abstract. Directionality of zeros and poles in multivariable systems­ izations of RHP­zeros and poles in Blaschke products, with state­space realizations dependent on the pole

  13. DIRECTIONS AND FACTORIZATIONS OF ZEROS AND POLES IN MULTIVARIABLE SYSTEMS

    E-Print Network [OSTI]

    Skogestad, Sigurd

    DIRECTIONS AND FACTORIZATIONS OF ZEROS AND POLES IN MULTIVARIABLE SYSTEMS K. Havre1 and S. INTERNAL REPORT - June 96. Abstract. Directionality of zeros and poles in multivariable systems- izations of RHP-zeros and poles in Blaschke products, with state-space realizations dependent on the pole

  14. Optical characterization of periodically-poled KTiOPO4

    E-Print Network [OSTI]

    Exter, Martin van

    Optical characterization of periodically-poled KTiOPO4 W. H. Peeters and M. P. van Exter Huygens-conversion(SPDC) give a direct visualization of the poling quality of a periodically-poled crystal. Identical Maker with small and slowly-varying deformations of the poling structure. Our theoretical model, based on a Fourier

  15. Choosing Poles So That the Single-Input Pole Placement Problem Is Well Conditioned

    E-Print Network [OSTI]

    Xu, Hongguo; Mehrmann, Volker

    1998-05-01

    We discuss the single-input pole placement problem (SIPP) and analyze how the conditioning of the problem can be estimated and improved if the poles are allowed to vary in specific regions in the complex plane. Under certain assumptions we give...

  16. Three-point spherical mirror mount

    DOE Patents [OSTI]

    Cutburth, R.W.

    1984-01-23

    A three-point spherical mirror mount for use with lasers is disclosed. The improved mirror mount is adapted to provide a pivot ring having an outer surface with at least three spaced apart mating points to engage an inner spherical surface of a support housing.

  17. Lucas Patzek Washington State University, Mount Vernon

    E-Print Network [OSTI]

    Patzek, Tadeusz W.

    - 1 - Lucas Patzek Address: Washington State University, Mount Vernon Department of Crop and Soil), Aug. 2008 ­ Graduating Feb. 2012 Washington State University, Mount Vernon, WA. Major advisor: Dr factors on diverse small grain production systems of Washington State. B.S. in Molecular, Cellular

  18. Light propagation in the South Pole ice

    SciTech Connect (OSTI)

    Williams, Dawn; Collaboration: IceCube Collaboration

    2014-11-18

    The IceCube Neutrino Observatory is located in the ice near the geographic South Pole. Particle showers from neutrino interactions in the ice produce light which is detected by IceCube modules, and the amount and pattern of deposited light are used to reconstruct the properties of the incident neutrino. Since light is scattered and absorbed by ice between the neutrino interaction vertex and the sensor, IceCube event reconstruction depends on understanding the propagation of light through the ice. This paper presents the current status of modeling light propagation in South Pole ice, including the recent observation of an azimuthal anisotropy in the scattering.

  19. Home Grounds & Animals 2015 Control of Ornamental Diseases...................................................................................... 4-3

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    ......................................................................................... 4-3 Determine the Nature of a Disease Problem by Using the Index of Ornamental Plants..................................................... 4-35 Plant Injury-37 continued #12;Home Grounds & Animals 2015 Table 4.6 - List of Common Insecticide Mixtures

  20. The effect of sodium chloride in the irrigation water on the growth of selected ornamental plants 

    E-Print Network [OSTI]

    Apps, Gary Edward

    1976-01-01

    THE EFFECT OF SODIUM CHLORIDE IN THE IRRIGATION WATER ON THE GROWTH OF SELECTED ORNAMENTAL PLANTS A Thesis by GARY EDWARD APPS Submitted to the Graduate College of Texas A6M University in partial fulfillment of the requirement for the degree... of MASTER OF SCIENCE December 1976 Major Subject: Floriculture THE EFFECT OF SODIUM CHLORIDE IN THE IRRIGATION WATER ON THE GROWTH OF SELECTED ORNAMENTAL PLANTS A Thesis by GARY EDWARD APPS Approved as to style and content by: (Chairman of Committee...

  1. Vibration dissipation mount for motors or the like

    DOE Patents [OSTI]

    Small, Thomas R. (Brookeville, MD)

    1987-01-01

    A vibration dissipation mount which permits the mounting of a motor, generator, or the like such that the rotatable shaft thereof passes through the mount and the mount permits the dissipation of self-induced and otherwise induced vibrations wherein the mount comprises a pair of plates having complementary concave and convex surfaces, a semi-resilient material being disposed therebetween.

  2. Muon Flux at the Geographical South Pole

    E-Print Network [OSTI]

    X. Bai; T. K. Gaisser; A. Karle; K. Rawlins; G. M. Spiczak; Todor Stanev

    2006-02-17

    The muon flux at the South-Pole was measured for five zenith angles, $0^{\\circ}$, $15^{\\circ}$, $35^{\\circ}$, $82.13^{\\circ}$ and $85.15^{\\circ}$ with a scintillator muon telescope incorporating ice Cherenkov tank detectors as the absorber. We compare the measurements with other data and with calculations.

  3. Two--poles R-matrices

    E-Print Network [OSTI]

    M. Talon

    1992-10-02

    We study integrable dynamical systems described by a Lax pair involving a spectral parameter. By solving the classical Yang-Baxter equation when the R-matrix has two poles we show that they can be interpreted as natural motions on a twisted loop algebra.

  4. Motorized control for mirror mount apparatus

    DOE Patents [OSTI]

    Cutburth, Ronald W. (Tracy, CA)

    1989-01-01

    A motorized control and automatic braking system for adjusting mirror mount apparatus is disclosed. The motor control includes a planetary gear arrangement to provide improved pitch adjustment capability while permitting a small packaged design. The motor control for mirror mount adjustment is suitable for laser beam propagation applications. The brake is a system of constant contact, floating detents which engage the planetary gear at selected between-teeth increments to stop rotation instantaneously when the drive motor stops.

  5. Measurement of the Cosmic Microwave Background Polarization with the BICEP Telescope at the South Pole

    E-Print Network [OSTI]

    Takahashi, Yuki David

    2010-01-01

    South Pole Dark Sector and LC-130 . . . . . . .2.2 South Pole site . . . . . . . . . . . . . .Bicep Telescope at the South Pole by Yuki David Takahashi A

  6. Measurements of Secodary Cosmic Microwave Background Anisotropies with the South Pole Telescope

    E-Print Network [OSTI]

    Lueker, Martin Van

    2010-01-01

    6 The South Pole Telescope Atmospheric Conditionsat the South Pole Telescope and Optical Design . . . . . . .interplay of cable delays, poles, resonances and zeroes in

  7. EECBG Success Story: North Pole's Holiday Wish for an Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Pole's Holiday Wish for an Energy Efficient 2012 EECBG Success Story: North Pole's Holiday Wish for an Energy Efficient 2012 December 23, 2011 - 4:20pm Addthis The city of North...

  8. Department of Veterans Affairs, FONSI - Ground mounted solar...

    Office of Environmental Management (EM)

    Ground mounted solar photovoltaic power at San Joaquin National Cemetery Department of Veterans Affairs, FONSI - Ground mounted solar photovoltaic power at San Joaquin National...

  9. SELECTION OF VARIABLES FOR REGULATORY CONTROL USING POLE DIRECTIONS.

    E-Print Network [OSTI]

    Skogestad, Sigurd

    SELECTION OF VARIABLES FOR REGULATORY CONTROL USING POLE DIRECTIONS. K. Havre1 and S. Skogestad 2 of a stabilizing control structure, using the in- formation given in the pole directions. It is shown how the input/output pole directions are related to the minimum input energy needed to stabilize a given unstable mode. 1

  10. SELECTION OF VARIABLES FOR REGULATORY CONTROL USING POLE VECTORS

    E-Print Network [OSTI]

    Skogestad, Sigurd

    SELECTION OF VARIABLES FOR REGULATORY CONTROL USING POLE VECTORS Kjetil Havre 1 Sigurd Skogestad 2: This paper consider control structure design using the information given in the pole vectors. It is shown how the input and output pole vectors are related to the minimum input energy needed to stabilize a given

  11. POLE PLACEMENT BY STATIC OUTPUT FEEDBACK FOR GENERIC LINEAR SYSTEMS

    E-Print Network [OSTI]

    Eremenko, Alexandre

    POLE PLACEMENT BY STATIC OUTPUT FEEDBACK FOR GENERIC LINEAR SYSTEMS A. EREMENKO AND A. GABRIELOV of such systems, where the real pole placement map is not surjective. It follows that for each system in U, there exists an open set of pole configurations, symmetric with respect to the real line, which cannot

  12. MATRIX RATIONAL INTERPOLATION WITH POLES AS INTERPOLATION POINTS

    E-Print Network [OSTI]

    Labahn, George

    MATRIX RATIONAL INTERPOLATION WITH POLES AS INTERPOLATION POINTS M. VAN BAREL Department, we show the equivalence between matrix rational interpolation problems with poles as interpolation points and no-pole problems. This equivalence provides an effective method for computing matrix rational

  13. Dimensional perturbation theory for Regge poles Timothy C. Germann

    E-Print Network [OSTI]

    Kais, Sabre

    Dimensional perturbation theory for Regge poles Timothy C. Germann Department of Chemistry perturbation theory to the calculation of Regge pole positions, providing a systematic improvement to earlier. INTRODUCTION In scattering theory, Regge poles correspond to singu- larities of the scattering matrix

  14. Counterexamples to pole placement by static output feedback

    E-Print Network [OSTI]

    Eremenko, Alexandre

    Counterexamples to pole placement by static output feedback A. Eremenko # and A. Gabrielov + 6 these conditions, there is a non­empty open subset U of such systems, where the real pole placement map is not surjective. It follows that for systems in U , there exist open sets of pole configurations which cannot

  15. Counterexamples to pole placement by static output feedback

    E-Print Network [OSTI]

    Eremenko, Alexandre

    Counterexamples to pole placement by static output feedback A. Eremenko and A. Gabrielov 6 these conditions, there is a non-empty open subset U of such systems, where the real pole placement map is not surjective. It follows that for systems in U, there exist open sets of pole configurations which cannot

  16. Positive decomposition of transfer functions with multiple poles

    E-Print Network [OSTI]

    Matolcsi, Máté

    Positive decomposition of transfer functions with multiple poles Bâ??ela Nagy 1 , Mâ??atâ??e Matolcsi 2 poles. One of the appearing positive systems is always 1­dimensional, while the other has dimension corresponding to the location and order of the poles of t(z). Recently, in [10], a universal approach was found

  17. POLE PLACEMENT BY STATIC OUTPUT FEEDBACK FOR GENERIC LINEAR SYSTEMS

    E-Print Network [OSTI]

    Eremenko, Alexandre

    POLE PLACEMENT BY STATIC OUTPUT FEEDBACK FOR GENERIC LINEAR SYSTEMS A. EREMENKO # AND A. GABRIELOV of such systems, where the real pole placement map is not surjective. It follows that for each system in U , there exists an open set of pole configurations, symmetric with respect to the real line, which cannot

  18. RESONANCES AND SCATTERING POLES ON ASYMPTOTICALLY HYPERBOLIC MANIFOLDS

    E-Print Network [OSTI]

    Guillarmou, Colin

    RESONANCES AND SCATTERING POLES ON ASYMPTOTICALLY HYPERBOLIC MANIFOLDS COLIN GUILLARMOU Abstract. On an asymptotically hyperbolic manifold (X; g), we show that the poles (called resonances) of the meromorphic extension of the resolvent (#1;g #21;(n #21;)) 1 coincide, with multiplicities, with the poles (called

  19. PERFORMANCE EVALUATION OF FIBER-REINFORCED POLYMER POLES FOR

    E-Print Network [OSTI]

    PERFORMANCE EVALUATION OF FIBER- REINFORCED POLYMER POLES FOR TRANSMISSION LINES BY SHERIF MOHAMED Performance Evaluation of Flber-RelDforced Polymer Pole. for Transmission Lines BY Sherif Mohamed Ibrahim demand for pole-type transmission structures has necessitated the utilization of innovative

  20. SELECTION OF VARIABLES FOR REGULATORY CONTROL USING POLE VECTORS

    E-Print Network [OSTI]

    Skogestad, Sigurd

    SELECTION OF VARIABLES FOR REGULATORY CONTROL USING POLE VECTORS Kjetil Havre1 Sigurd Skogestad 2: This paper consider control structure design using the information given in the pole vectors. It is shown how the input and output pole vectors are related to the minimum input energy needed to stabilize a given

  1. Bounds on Scattering Poles in One Dimension Michael Hitrik

    E-Print Network [OSTI]

    Hitrik, Michael

    1 Bounds on Scattering Poles in One Dimension Michael Hitrik Department of Mathematics, University-exponentially decaying potentials on the real line sharp upper bounds on the counting function of the poles in discs are derived and the density of the poles in strips is estimated. In the case of nonnegative potentials

  2. Topography of the Lunar Poles from Radar Interferometry: A

    E-Print Network [OSTI]

    Margot, Jean-Luc

    Topography of the Lunar Poles from Radar Interferometry: A Survey of Cold Trap Locations J. L. Margot,1 * D. B. Campbell,1 R. F. Jurgens,2 M. A. Slade2 Detailed topographic maps of the lunar poles are 1030 and 2550 square kilometers for the north and south poles, respectively. Topographic depressions

  3. SELECTION OF VARIABLES FOR REGULATORY CONTROL USING POLE DIRECTIONS.

    E-Print Network [OSTI]

    Skogestad, Sigurd

    SELECTION OF VARIABLES FOR REGULATORY CONTROL USING POLE DIRECTIONS. K. Havre 1 and S. Skogestad 2 of a stabilizing control structure, using the in­ formation given in the pole directions. It is shown how the input/output pole directions are related to the minimum input energy needed to stabilize a given unstable mode. 1

  4. POLE PLACEMENT VIA OUTPUT FEEDBACK: A METHODOLOGY BASED ON

    E-Print Network [OSTI]

    Orsi, Robert

    POLE PLACEMENT VIA OUTPUT FEEDBACK: A METHODOLOGY BASED ON PROJECTIONS Kaiyang Yang and Robert Orsi feedback pole placement problems of the following rather general form: given n subsets of the complex plane, find a static output feedback that places in each of these subsets a pole of the closed loop system

  5. SCATTERING POLES FOR NEGATIVE POTENTIALS Andr'as Vasy

    E-Print Network [OSTI]

    Vasy, András

    SCATTERING POLES FOR NEGATIVE POTENTIALS Andr'as Vasy Mathematics Department, MIT Cambridge, MA number of poles in P and they correspond to the bound states of the Hamiltonian \\Delta +V (\\Delta is the positive Laplacian). In [5] Zworski has shown that the number of scattering poles n(r) in a disc of radius

  6. REGULAR POLES AND -NUMBERS IN THE THEORY OF HOLOMORPHIC SEMIGROUPS

    E-Print Network [OSTI]

    Bracci, Filippo

    REGULAR POLES AND -NUMBERS IN THE THEORY OF HOLOMORPHIC SEMIGROUPS FILIPPO BRACCI, MANUEL D. CONTRERAS, AND SANTIAGO D´IAZ-MADRIGAL Abstract. We introduce the notion of regular (boundary) poles- ular poles in terms of -points (i.e. pre-images of values with positive Carleson-Makarov -numbers

  7. Permanent magnet machine and method with reluctance poles and non-identical PM poles for high density operation

    SciTech Connect (OSTI)

    Hsu, John S.

    2010-05-18

    A method and apparatus in which a stator (11) and a rotor (12) define a primary air gap (20) for receiving AC flux and at least one source (23, 40), and preferably two sources (23, 24, 40) of DC excitation are positioned for inducing DC flux at opposite ends of the rotor (12). Portions of PM material (17, 17a) are provided as boundaries separating PM rotor pole portions from each other and from reluctance poles. The PM poles (18) and the reluctance poles (19) can be formed with poles of one polarity having enlarged flux paths in relation to flux paths for pole portions of an opposite polarity, the enlarged flux paths communicating with a core of the rotor (12) so as to increase reluctance torque produced by the electric machine. Reluctance torque is increased by providing asymmetrical pole faces. The DC excitation can also use asymmetric poles and asymmetric excitation sources. Several embodiments are disclosed with additional variations.

  8. Is There Physics in Landau Poles ?

    E-Print Network [OSTI]

    Rolf Tarrach

    1995-02-03

    Triviality and Landau poles are often greeted as harbingers of new physics at 1 TeV. After briefly reviewing the ideas behind this, a model of singular quantum mechanics is introduced. Its ultraviolet structure, as well as some features of its vacuum, related to triviality, very much parallel $\\lambda\\phi^4$. The model is solvable, exactly and perturbatively, in any dimension. From its analysis we learn that Landau poles do not appear in any exactly computed observable, but only in truncated perturbation theory, when perturbation theory is performed with the wrong sign coupling. If these findings apply to the standard model no new physics at 1 TeV should be expected but only challenges for theorists.

  9. ABJM Membrane Instanton from Pole Cancellation Mechanism

    E-Print Network [OSTI]

    Sanefumi Moriyama; Tomoki Nosaka

    2015-01-21

    The coefficients of the membrane instantons in the ABJM theory are known to be quadratic polynomials of the chemical potential. We show that, after deforming the ABJM theory into more general superconformal Chern-Simons theories labelled by (q,p) where the original ABJM theory corresponds to (q,p)=(1,1), we can decompose the membrane instanton into three types of non-perturbative effects with constant coefficients independent of the chemical potential. We find that, although these constants contain poles at certain values of q and p including the ABJM case, all of the poles cancel among themselves and the finite quadratic polynomial coefficients are reproduced at these values. This is similar to what happens between the membrane instantons and the worldsheet instantons in the ABJM theory.

  10. Nonperturbative screening of the Landau pole

    E-Print Network [OSTI]

    Francesco Giacosa; Ralf Hofmann

    2007-04-19

    Based on the trace anomaly for the energy-momentum tensor, an effective theory for the thermodynamics of the deconfining phase, and by assuming the asymptotic behavior to be determined by one-loop perturbation theory we compute the nonperturbative beta function for the fundamental coupling $g$ in SU(2) and SU(3) Yang-Mills theory. With increasing temperature we observe a very rapid approach to the perturbative running. The Landau pole is nonperturbatively screened.

  11. Neutrino Astronomy at the South Pole

    E-Print Network [OSTI]

    P. A. Toale; for the IceCube Collaboration

    2006-07-01

    IceCube is currently being built deep in the glacial ice beneath the South Pole. In its second year of construction, it is already larger than its predecessor, AMANDA. AMANDA continues to collect high energy neutrino and muon data as an independent detector until it is integrated with IceCube. After introducing both detectors, recent results from AMANDA and a status report on IceCube are presented.

  12. the future of gw's mount vernon campus implementing the 2010 mount vernon campus plan

    E-Print Network [OSTI]

    Vertes, Akos

    the future of gw's mount vernon campus implementing the 2010 mount vernon campus plan FALL 2012--Proposed Future Development SitesEXHIBIT L Proposed Perimeter Enhancements ­ W Street EXHIBIT L Proposed Perimeter determined early in the planning process based on input from members of the community, including: Future

  13. Scattering matrices of volcanic ash particles of Mount St. Helens, Redoubt, and Mount Spurr Volcanoes

    E-Print Network [OSTI]

    Rose, William I.

    Scattering matrices of volcanic ash particles of Mount St. Helens, Redoubt, and Mount Spurr particles taken from seven samples of volcanic ashes corresponding to four different volcanic eruptions. The samples studied contain large mass fractions of fine particles and were chosen to represent ash that could

  14. Between the poles : locating physics majors in the expert-novice continuum

    E-Print Network [OSTI]

    Gire, Elizabeth Ellen

    2007-01-01

    DISSERTATION Between the Poles: Locating Physics Majors inSAN DIEGO Between the Poles: Locating Physics Majors in the

  15. Floriculture and Greenhouse Crops Utilization of ultraviolet-C (UV-C) irradiation on ornamental plants for disease

    E-Print Network [OSTI]

    Chen, Tsuhan

    Floriculture and Greenhouse Crops Utilization of ultraviolet-C (UV-C) irradiation on ornamental the effects of ultraviolet-C irradiation (UV-C) on commercially-valuable greenhouse ornamental plants UV lamps (Osram HNS OFR) have been suspended in the LIHREC greenhouses over greenhouse benches. Each

  16. Moult speed affects structural feather ornaments in the blue tit M. GRIGGIO,* L. SERRA, D. LICHERI, C. CAMPOMORI & A. PILASTRO

    E-Print Network [OSTI]

    Pilastro, Andrea

    colours with those of control birds. Blue tits were sexually dimorphic on the UV / blue crown are among the commonest sexually selected ornaments in birds (Hausmann et al., 2003; Senar, 2006). Feather; multiple ornaments; photoperiod; sexual selection; structural colours. Abstract Growing evidence suggests

  17. Sensor mount assemblies and sensor assemblies

    DOE Patents [OSTI]

    Miller, David H. (Redondo Beach, CA)

    2012-04-10

    Sensor mount assemblies and sensor assemblies are provided. In an embodiment, by way of example only, a sensor mount assembly includes a busbar, a main body, a backing surface, and a first finger. The busbar has a first end and a second end. The main body is overmolded onto the busbar. The backing surface extends radially outwardly relative to the main body. The first finger extends axially from the backing surface, and the first finger has a first end, a second end, and a tooth. The first end of the first finger is disposed on the backing surface, and the tooth is formed on the second end of the first finger.

  18. Model independent determination of the {sigma} pole

    SciTech Connect (OSTI)

    Leutwyler, H.

    2008-08-31

    The first part of this report reviews recent developments at the interface between lattice work on QCD with light dynamical quarks, effective field theory and low energy precision experiments. Then I discuss how dispersion theory can be used to analyze the low energy structure of the {pi}{pi} scattering amplitude in a model independent manner. This leads to an exact formula for the mass and width of the lowest few resonances, in terms of observable quantities. As an application, I consider the pole position of the {sigma}, paying particular to error propagation in the numerical analysis. The report is based on work done in collaboration with Irinel Caprini and Gilberto Colangelo.

  19. Keeler-Pennwalt Wood Pole Removal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousand Cubic Feet) Sold toKeeler-Pennwalt-Wood-Pole-Removal Sign

  20. Microrobotic Protein Crystal Mounting Under Visual Guidance

    E-Print Network [OSTI]

    Georgiev, Atanas

    micro-shovels which address some limitations of the traditional cryogenic loops. We have used micro) Fig. 2. Mounting Tools: (a) A cryogenic loop; (b) a microshovel. obtained, it is analyzed to compute and its rapid freezing to liquid nitrogen temperatures. After that, the sample is installed on an X

  1. Photovoltaic module mounting clip with integral grounding

    DOE Patents [OSTI]

    Lenox, Carl J.

    2010-08-24

    An electrically conductive mounting/grounding clip, usable with a photovoltaic (PV) assembly of the type having an electrically conductive frame, comprises an electrically conductive body. The body has a central portion and first and second spaced-apart arms extending from the central portion. Each arm has first and second outer portions with frame surface-disrupting element at the outer portions.

  2. Randomly poled crystals as a source of photon pairs

    E-Print Network [OSTI]

    Jan Perina Jr; Jiri Svozilik

    2011-01-04

    Generation of photon pairs from randomly poled nonlinear crystals is investigated using analytically soluble model and numerical calculations. Randomly poled crystals are discovered as sources of entangled ultra broad-band signal and idler fields. Their photon-pair generation rates scale linearly with the number of domains. Entanglement times as short as several fs can be reached. Comparison with chirped periodically-poled structures is given and reveals close similarity.

  3. A New Air Cerenkov Array at the South Pole

    E-Print Network [OSTI]

    Delaware, University of

    A New Air­ Ÿ Cerenkov Array at the South Pole J.E. Dickinson a J.R. Gill a S.P. Hart b;a G.C. Hill a a University of Leeds, Leeds LS2 9JT, United Kingdom b Amundsen­Scott South Pole Station, Antarctica c array of air­ Ÿ Cerenkov radiation detectors estab­ lished at the South Pole. VULCAN operates

  4. Annihilation Poles for Form Factors in XXZ Model

    E-Print Network [OSTI]

    S. Pakuliak

    1993-07-14

    The annihilation poles for the form factors in XXZ model are studied using vertex operators introduced in \\cite{DFJMN}. An annihilation pole is the property of form factors according to which the residue of the $2n$-particle form factor in such a pole can be expressed through linear combination of the $2n-2$-particle form factors. To prove this property we use the bosonization of the vertex operators in XXZ model which was invented in \\cite{JMMN}.

  5. Sharp upper bounds on the number of the scattering poles

    E-Print Network [OSTI]

    We study the scattering poles of a compactly supported “black box” perturbations of the Laplacian in Rn, n odd. We prove a sharp upper bound of the counting ...

  6. On the Ramanujan Conjecture and Finiteness of Poles for Certain ...

    E-Print Network [OSTI]

    Sep 2, 2000 ... On the Ramanujan Conjecture and Finiteness of Poles for Certain $L$-. Functions. Freydoon Shahidi. The Annals of Mathematics, Second ...

  7. GENETIC POPULATION STRUCTURE, GENE FLOW, AND EVOLUTIONARY HISTORY OF SELECTED ORNAMENTAL FISH

    E-Print Network [OSTI]

    GENETIC POPULATION STRUCTURE, GENE FLOW, AND EVOLUTIONARY HISTORY OF SELECTED ORNAMENTAL FISH dispersal distances in the Red Sea 12 Chapter 3 Comparative genetic population structure of two reef fishes and the demographic connectivity in the endemic fish species of the Red Sea Larabicus quadrilineatus, and in the two

  8. Use of Antibiotics in Ornamental Fish Aquaculture1 Roy P. E. Yanong2

    E-Print Network [OSTI]

    Watson, Craig A.

    Cir 84 Use of Antibiotics in Ornamental Fish Aquaculture1 Roy P. E. Yanong2 1. This document to any fish-health manager's toolbox, but they are only tools and not `magic bullets.' The ability of antibiotics to help eliminate a fish disease depends on a number of factors: 1) Does the problem actually have

  9. Some Small Native Freshwater Fish Recommended for Mosquito and Midge Control in Ornamental Ponds1

    E-Print Network [OSTI]

    Watson, Craig A.

    ENY-670 Some Small Native Freshwater Fish Recommended for Mosquito and Midge Control in Ornamental fish, and supplying water for wildlife, the potential for new mosquito breeding sites is increasing. Small insectivorous fish are a valuable tool in controlling mosquitoes and midges ("blind mosquitoes

  10. Occurrence and pathogenicity of Neofusicoccum parvum and N. mangiferae on ornamental Tibouchina species

    E-Print Network [OSTI]

    plants, including Eucalyptus spp. The recent discovery of the Eucalyptus pathogen, Chrysoporthe be alternative hosts for other Eucalyptus pathogens. Therefore, the aim of this study was to consider whether species of the Botryosphaeriaceae occurring on Eucalyptus spp. might also occur on ornamental Tibouchina

  11. Millimeter Wavelength Brightness Fluctuations of the Atmosphere Above the South Pole

    E-Print Network [OSTI]

    R. S. Bussmann; W. L. Holzapfel; C. L. Kuo

    2004-12-02

    We report measurements of the millimeter wavelength brightness fluctuations produced by the atmosphere above the South Pole made with the Arcminute Cosmology Bolometer Array Receiver (ACBAR). The data span the 2002 Austral winter during which ACBAR was mounted on the Viper telescope at the South Pole. We recover the atmospheric signal in the presence of instrument noise by calculating the correlation between signals from distinct elements of the ACBAR bolometer array. With this method, it is possible to measure atmospheric brightness fluctuations with high SNR even under the most stable atmospheric conditions. The observed atmospheric signal is characterized by the parameters of the Komolgorov-Taylor (KT) model, which are the amplitude and power law exponent describing the atmospheric power spectrum, and the two components of the wind angular velocity at the time of the observation. The KT model is typically a good description of the observed fluctuations, and fits to the data produce values of the Komolgorov exponent that are consistent with theoretical expectations. By combining the wind angular velocity results with measurements of the wind linear velocity, we find that the altitude of the observed atmospheric fluctuations is consistent with the distribution of water vapor determined from radiosonde data. For data corresponding to frequency passbands centered on 150, 219, and 274 GHz, we obtain median fluctuation power amplitudes of [10, 38, 74] mK^{2} rad^{-5/3} in Rayleigh-Jeans temperature units. Comparing with previous work, we find that these median amplitudes are approximately an order of magnitude smaller than those found at the South Pole during the Austral summer and at least 30 times lower than found at the ALMA site in the Atacama desert.

  12. Adjustable link for kinematic mounting systems

    DOE Patents [OSTI]

    Hale, L.C.

    1997-07-01

    An adjustable link for kinematic mounting systems is disclosed. The adjustable link is a low-cost, passive device that provides backlash-free adjustment along its single constraint direction and flexural freedom in all other directions. The adjustable link comprises two spheres, two sockets in which the spheres are adjustable retain, and a connection link threadly connected at each end to the spheres, to provide a single direction of restraint and to adjust the length or distance between the sockets. Six such adjustable links provide for six degrees of freedom for mounting an instrument on a support. The adjustable link has applications in any machine or instrument requiring precision adjustment in six degrees of freedom, isolation from deformations of the supporting platform, and/or additional structural damping. The damping is accomplished by using a hollow connection link that contains an inner rod and a viscoelastic separation layer between the two. 3 figs.

  13. The AMiBA Hexapod Telescope Mount

    E-Print Network [OSTI]

    Koch, Patrick M; Nishioka, Hiroaki; Jiang, Homin; Lin, Kai-Yang; Umetsu, Keiichi; Huang, Yau-De; Raffin, Philippe; Chen, Ke-Jung; Ibanez-Romano, Fabiola; Chereau, Guillaume; Chen, Ming-Tang; Ho, Paul T P; Pausch, Konrad; Willmeroth, Klaus; Altamirano, Pablo; Chang, Chia-Hao; Chang, Shu-Hao; Chang, Su-Wei; Han, Chih-Chiang; Kubo, Derek; Li, Chao-Te; Liu, Guo-Chin; Martin-Cocher, Pierre; Oshiro, Peter; Wei, Ta-Shun; Birkinshaw, Mark; Lancaster, Katy; Lo, Kwok Yung; Martin, Robert N; Molnar, Sandor M; Patt, Ferdinand; Romeo, Bob

    2009-01-01

    AMiBA is the largest hexapod astronomical telescope in current operation. We present a description of this novel hexapod mount with its main mechanical components -- the support cone, universal joints, jack screws, and platform -- and outline the control system with the pointing model and the operating modes that are supported. The AMiBA hexapod mount performance is verified based on optical pointing tests and platform photogrammetry measurements. The photogrammetry results show that the deformations in the inner part of the platform are less than 120 micron rms. This is negligible for optical pointing corrections, radio alignment and radio phase errors for the currently operational 7-element compact configuration. The optical pointing error in azimuth and elevation is successively reduced by a series of corrections to about 0.4 arcmin rms which meets our goal for the 7-element target specifications.

  14. Adjustable link for kinematic mounting systems

    DOE Patents [OSTI]

    Hale, Layton C. (Livermore, CA)

    1997-01-01

    An adjustable link for kinematic mounting systems. The adjustable link is a low-cost, passive device that provides backlash-free adjustment along its single constraint direction and flexural freedom in all other directions. The adjustable link comprises two spheres, two sockets in which the spheres are adjustable retain, and a connection link threadly connected at each end to the spheres, to provide a single direction of restraint and to adjust the length or distance between the sockets. Six such adjustable links provide for six degrees of freedom for mounting an instrument on a support. The adjustable link has applications in any machine or instrument requiring precision adjustment in six degrees of freedom, isolation from deformations of the supporting platform, and/or additional structural damping. The damping is accomplished by using a hollow connection link that contains an inner rod and a viscoelastic separation layer between the two.

  15. Conceptual design for PSP mounting bracket

    SciTech Connect (OSTI)

    Ransom, G.; Stein, R. [Martin Marietta Energy Systems, Inc., Piketon, OH (United States)

    1991-12-31

    Protective structural packages (PSP`s or overpacks) used to ship 2 1/2-ton UF{sub 6} product cylinders are bolted to truck trailers. All bolts penetrate two longitudinal rows of wooden planks. Removal and replacement is required at various intervals for maintenance and routine testing. A conceptual design is presented for mounting brackets which would securely attach PSP`s to trailer frames, reduce removal and replacement time, and minimize risk of personnel injury.

  16. Fixture for mounting small parts for processing

    DOE Patents [OSTI]

    Foreman, L.R.; Gomez, V.M.; Thomas, M.H.

    1990-05-29

    A fixture for mounting small parts, such as fusion target spheres or microelectronic components is disclosed. A glass stalk is drawn and truncated near its tip. The truncated end of the glass stalk is dipped into silicone rubber forming an extending streamer. After the rubber cures for approximately 24 hours, a small part is touched to the streamer, and will be held securely throughout processing. 5 figs.

  17. Mount Amiata Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformation MontanaOhio:Hill,Morrisville,Mount Airy, Maryland:

  18. Mounting apparatus for a nozzle guide vane assembly

    DOE Patents [OSTI]

    Boyd, G.L.; Shaffer, J.E.

    1995-09-12

    The present invention provides a ceramic nozzle guide assembly with an apparatus for mounting it to a metal nozzle case that includes an intermediate ceramic mounting ring. The mounting ring includes a plurality of projections that are received within a plurality of receptacles formed in the nozzle case. The projections of the mounting ring are secured within the receptacles by a ceramic retainer that allows contact between the two components only along arcuate surfaces thus eliminating sliding contact between the components. 8 figs.

  19. Mounting apparatus for a nozzle guide vane assembly

    DOE Patents [OSTI]

    Boyd, Gary L. (Alpine, CA); Shaffer, James E. (Maitland, FL)

    1995-01-01

    The present invention provides a ceramic nozzle guide assembly with an apparatus for mounting it to a metal nozzle case that includes an intermediate ceramic mounting ring. The mounting ring includes a plurality of projections that are received within a plurality of receptacles formed in the nozzle case. The projections of the mounting ring are secured within the receptacles by a ceramic retainer that allows contact between the two components only along arcuate surfaces thus eliminating sliding contact between the components.

  20. Flow of S-matrix poles for elementary quantum potentials

    E-Print Network [OSTI]

    B. Belchev; S. G. Neale; M. A. Walton

    2011-10-21

    The poles of the quantum scattering matrix (S-matrix) in the complex momentum plane have been studied extensively. Bound states give rise to S-matrix poles, and other poles correspond to non-normalizable anti-bound, resonance and anti-resonance states. They describe important physics, but their locations can be difficult to find. In pioneering work, Nussenzveig performed the analysis for a square well/wall, and plotted the flow of the poles as the potential depth/height varied. More than fifty years later, however, little has been done in the way of direct generalization of those results. We point out that today we can find such poles easily and efficiently, using numerical techniques and widely available software. We study the poles of the scattering matrix for the simplest piece-wise flat potentials, with one and two adjacent (non-zero) pieces. For the finite well/wall the flow of the poles as a function of the depth/height recovers the results of Nussenzveig. We then analyze the flow for a potential with two independent parts that can be attractive or repulsive, the two-piece potential. These examples provide some insight into the complicated behavior of the resonance, anti-resonance and anti-bound poles.

  1. Models for an alternative pole vault Jer^ome Hoepffner

    E-Print Network [OSTI]

    Hoepffner, Jérôme

    Models for an alternative pole vault J´er^ome Hoepffner June 14, 2012 Abstract Pole vault can discern two main approaches: one based on ex- perimental measurement of energies, forces wish to develop an alternative perspec- tive: come back to a model of a simpler structure in order

  2. Methane Hydrate Dissociation by Depressurization in a Mount Elbert Sandstone Sample: Experimental Observations and Numerical Simulations

    E-Print Network [OSTI]

    Kneafsey, T.

    2012-01-01

    in a Mount Elbert Sandstone Sample: Experimentalsample of hydrate-bearing sandstone from the Mount Elbertsample of hydrate-bearing sandstone from the Mount Elbert

  3. Photovoltaic module mounting clip with integral grounding

    DOE Patents [OSTI]

    Lenox, Carl J.

    2008-10-14

    An electrically conductive mounting/grounding clip, for use with a photovoltaic assembly of the type having an electrically conductive frame, comprises an electrically conductive body. The body has a central portion and first and second spaced-apart arms extending generally perpendicular to the central portion. Each arm has an outer portion with each outer portion having an outer end. At least one frame surface-disrupting element is at each outer end. The central portion defines a plane with the frame surface-disrupting elements pointing towards the plane. In some examples each arm extends from the central portion at an acute angle to the plane.

  4. Effect of thermal pole tip protrusion and disk roughness on slider disk contacts

    E-Print Network [OSTI]

    Xu, Jianfeng; Kiely, James D.; Hsia, Yiao-Tee; Talke, Frank E.

    2009-01-01

    A, Weng R, Li F (2004) Pole-tip protrusion effect on high1b, the protrusion of the pole tip is shown due to the J.can occur, resulting in pole tip damage and wear of the

  5. 2,000-year record of atmospheric methyl bromide from a South Pole ice core

    E-Print Network [OSTI]

    Saltzman, Eric S; Aydin, Murat; Tatum, Cheryl; Williams, Margaret B

    2008-01-01

    air from firn at the South Pole, Nature, 383, 231 – 235. 5METHYL BROMIDE FROM SOUTH POLE ICE CORE Butler, J. H. , M.of methyl chloride from a South Pole ice core: Evidence for

  6. Reward system and temporal pole contributions to affective evaluation during a first person shooter video game

    E-Print Network [OSTI]

    Mathiak, Krystyna A; Klasen, Martin; Weber, René; Ackermann, Hermann; Shergill, Sukhwinder S; Mathiak, Klaus

    2011-01-01

    Y: The Enigmatic temporal pole: a review of findings onS, Miyashita Y: Temporal pole activity during perception ofReward system and temporal pole contributions to affective

  7. Above-Threshold Poles in Model-Independent Form Factor Parametrizations

    E-Print Network [OSTI]

    Grinstein, B; Lebed, RF

    2015-01-01

    exact position z p of the pole is then given by Eqs. (26)– (for discussions on the relation of poles and resonances. 56,Above-Threshold Poles in Model-Independent Form Factor

  8. Greenhouse space allocation in the ornamental foliage industry in the Rio Grande Valley of Texas 

    E-Print Network [OSTI]

    Krafka, Brenda Dea Lang

    1986-01-01

    1986) Brenda Dea Lang Krafka, B. B. A. , Texas ASM University Chairman of Advisory Committee: Dr. C. Richard Shumway Ornamental tropical foliage plants are grown primarily for the decorative value of their leaves. Texas is the third largest... at Gulf Stream Greenhouses, Inc. Juan Guerre at Guerra's Inc. Duretta Genereau at D's Plants Ben Parsons at Neal Robinson Wholesale Greenhouses John Kent at Green Valley Sales, Inc. Mike Hoptay, Jr. at Ala-Don Nurseries Duane A. Hyland at Sunrise...

  9. Charge quantisation without magnetic poles: a topological approach to electromagnetism

    E-Print Network [OSTI]

    Romero Solha

    2015-09-28

    The present work provides a theoretical explanation for the quantisation of electric charges, an open problem since Millikan's oil drop experiment in 1909. This explanation is based solely on Maxwell's theory, it recasts Electromagnetic theory under the language of complex line bundles; therefore, neither magnetic poles nor quantum mechanics are invoked. The existence of magnetic poles was essentially the only theoretical explanation for charge quantisation (e.g. Dirac's magnetic pole), and there is no experimental data supporting their existence ---on the contrary, they have never been observed.

  10. Charge quantisation without magnetic poles: a topological approach to electromagnetism

    E-Print Network [OSTI]

    Romero Solha

    2015-08-08

    The present work provides a theoretical explanation for the quantisation of electric charges, an open problem since Millikan's oil drop experiment in 1909. This explanation is based solely on Maxwell's theory, it recasts Electromagnetic theory under the language of complex line bundles; therefore, neither magnetic poles nor quantum mechanics are invoked. The existence of magnetic poles was essentially the only theoretical explanation for charge quantisation (e.g. Dirac's magnetic pole), and there is no experimental data supporting their existence ---on the contrary, they have never been observed.

  11. Simulations on the electromechanical poling of ferroelectric ceramics

    E-Print Network [OSTI]

    Yin-Zhong Wu; Yong-Mei Tao

    2007-12-06

    Based on the two-step-switching model, the process of electromechanical poling of a ferroelectric ceramics is simulated. A difference of the remnant polarizations between two poling protocols (mechanical stress is applied before and after the application of poling field) is found from our simulations, which is also observed in experiment. An explanation is given to illustrate why the remnant polarization for the case that mechanical stress is loaded after the application of electric field is larger than the case that mechanical stress is loaded before the application of electric field. Our simulation results supply a proof for the validity of the two-step-switching model in the electromechanical poling of polycrystalline ferroelectric ceramics.

  12. Radio-frequency probes of Antarctic ice at South Pole

    E-Print Network [OSTI]

    Besson, David Zeke; Kravchenko, I.

    2013-05-16

    consistent with measurements in East Antarctica. Combined with other radio echo sounding data, we conclude that observed birefringent asymmetries at South Pole are generated entirely in the lower half of the ice sheet. By contrast, birefringent asymmetries...

  13. Baryon photo-decay amplitudes at the pole

    E-Print Network [OSTI]

    R. L. Workman; L. Tiator; A. Sarantsev

    2013-04-15

    We derive relations for baryon photo-decay amplitudes both for the Breit-Wigner and the pole positions. With an updated SAID partial wave analysis, technically similar to the earliest Virginia Tech analysis of photoproduction data, we compare photo-decay amplitudes at both resonance positions for a few selected nucleon resonances. Comparisons are made and a qualitative similarity, seen between the pole and Breit-Wigner values extracted by the Bonn-Gatchina group, is confirmed in the present study.

  14. Reusable vibration resistant integrated circuit mounting socket

    DOE Patents [OSTI]

    Evans, Craig N. (Irwin, PA)

    1995-01-01

    This invention discloses a novel form of socket for integrated circuits to be mounted on printed circuit boards. The socket uses a novel contact which is fabricated out of a bimetallic strip with a shape which makes the end of the strip move laterally as temperature changes. The end of the strip forms a barb which digs into an integrated circuit lead at normal temperatures and holds it firmly in the contact, preventing loosening and open circuits from vibration. By cooling the contact containing the bimetallic strip the barb end can be made to release so that the integrated circuit lead can be removed from the socket without damage either to the lead or to the socket components.

  15. Rack assembly for mounting solar modules

    DOE Patents [OSTI]

    Plaisted, Joshua Reed (Oakland, CA); West, Brian (San Francisco, CA)

    2010-12-28

    A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures o be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

  16. Article mounting and position adjustment stage

    DOE Patents [OSTI]

    Cutburth, Ronald W. (Tracy, CA); Silva, Leonard L. (Livermore, CA)

    1988-01-01

    An improved adjustment and mounting stage of the type used for the detection of laser beams is disclosed. A ring sensor holder has locating pins on a first side thereof which are positioned within a linear keyway in a surrounding housing for permitting reciprocal movement of the ring along the keyway. A rotatable ring gear is positioned within the housing on the other side of the ring from the linear keyway and includes an oval keyway which drives the ring along the linear keyway upon rotation of the gear. Motor-driven single-stage and dual (x, y) stage adjustment systems are disclosed which are of compact construction and include a large laser transmission hole.

  17. Article mounting and position adjustment stage

    DOE Patents [OSTI]

    Cutburth, R.W.; Silva, L.L.

    1988-05-10

    An improved adjustment and mounting stage of the type used for the detection of laser beams is disclosed. A ring sensor holder has locating pins on a first side thereof which are positioned within a linear keyway in a surrounding housing for permitting reciprocal movement of the ring along the keyway. A rotatable ring gear is positioned within the housing on the other side of the ring from the linear keyway and includes an oval keyway which drives the ring along the linear keyway upon rotation of the gear. Motor-driven single-stage and dual (x, y) stage adjustment systems are disclosed which are of compact construction and include a large laser transmission hole. 6 figs.

  18. Rack assembly for mounting solar modules

    DOE Patents [OSTI]

    Plaisted, Joshua Reed; West, Brian

    2012-09-04

    A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures to be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

  19. Accurate Telescope Mount Positioning with MEMS Accelerometers

    E-Print Network [OSTI]

    Mészáros, László; Pál, András; Csépány, Gergely

    2014-01-01

    This paper describes the advantages and challenges of applying microelectromechanical accelerometer systems (MEMS accelerometers) in order to attain precise, accurate and stateless positioning of telescope mounts. This provides a completely independent method from other forms of electronic, optical, mechanical or magnetic feedback or real-time astrometry. Our goal is to reach the sub-arcminute range which is well smaller than the field-of-view of conventional imaging telescope systems. Here we present how this sub-arcminute accuracy can be achieved with very cheap MEMS sensors and we also detail how our procedures can be extended in order to attain even finer measurements. In addition, our paper discusses how can a complete system design be implemented in order to be a part of a telescope control system.

  20. Photovoltaic array mounting apparatus, systems, and methods

    DOE Patents [OSTI]

    West, John Raymond; Atchley, Brian; Hudson, Tyrus Hawkes; Johansen, Emil

    2014-12-02

    An apparatus for mounting a photovoltaic (PV) module on a surface, including a support with an upper surface, a lower surface, tabs, one or more openings, and a clip comprising an arm and a notch, where the apparatus resists wind forces and seismic forces and creates a grounding electrical bond between the PV module, support, and clip. The invention further includes a method for installing PV modules on a surface that includes arranging supports in rows along an X axis and in columns along a Y axis on a surface such that in each row the distance between two neighboring supports does not exceed the length of the longest side of a PV module and in each column the distance between two neighboring supports does not exceed the length of the shortest side of a PV module.

  1. Electric And Electromagnetic Outline Of The Mount Somma-Vesuvius...

    Open Energy Info (EERE)

    Structural Setting Abstract We present and discuss the results of an integrated electrical and electromagnetic survey in the active volcanic area of Mount Somma-Vesuvius...

  2. Electro-optic component mounting device

    DOE Patents [OSTI]

    Gruchalla, M.E.

    1994-09-13

    A technique is provided for integrally mounting a device such as an electro-optic device in a transmission line to avoid series resonant effects. A center conductor of the transmission line has an aperture formed therein for receiving the device. The aperture splits the center conductor into two parallel sections on opposite sides of the device. For a waveguide application, the center conductor is surrounded by a conductive ground surface which is spaced apart from the center conductor with a dielectric material. One set of electrodes formed on the surface of the electro-optic device is directly connected to the center conductor and an electrode formed on the surface of the electro-optic device is directly connected to the conductive ground surface. The electrodes formed on the surface of the electro-optic device are formed on curved sections of the surface of the device to mate with correspondingly shaped electrodes on the conductor and ground surface to provide a uniform electric field across the electro-optic device. The center conductor includes a passage formed therein for passage of optical signals to an electro-optic device. 10 figs.

  3. Electro-optic component mounting device

    DOE Patents [OSTI]

    Gruchalla, Michael E. (Albuquerque, NM)

    1994-01-01

    A technique is provided for integrally mounting a device such as an electro-optic device (50) in a transmission line to avoid series resonant effects. A center conductor (52) of the transmission line has an aperture (58) formed therein for receiving the device (50). The aperture (58) splits the center conductor into two parallel sections on opposite sides of the device. For a waveguide application, the center conductor is surrounded by a conductive ground surface (54), which is spaced apart from the center conductor with a dielectric material (56). One set of electrodes formed on the surface of the electro-optic device (50) is directly connected to the center conductor 52 and an electrode formed on the surface of the electro-optic device is directly connected to the conductive ground surface (54). The electrodes formed on the surface of the electro-optic device are formed on curved sections of the surface of the device to mate with correspondingly shaped electrodes on the conductor and ground surface to provide a uniform electric field across the electro-optic device. The center conductor includes a passage ( 60) formed therein for passage of optical signals to an electro-optic device.

  4. Laser housing having integral mounts and method of manufacturing same

    DOE Patents [OSTI]

    Herron, Michael Alan; Brickeen, Brian Keith

    2004-10-19

    A housing adapted to position, support, and facilitate aligning various components, including an optical path assembly, of a laser. In a preferred embodiment, the housing is constructed from a single piece of material and broadly comprises one or more through-holes; one or more cavities; and one or more integral mounts, wherein the through-holes and the cavities cooperate to define the integral mounts. Securement holes machined into the integral mounts facilitate securing components within the integral mounts using set screws, adhesive, or a combination thereof. In a preferred method of making the housing, the through-holes and cavities are first machined into the single piece of material, with at least some of the remaining material forming the integral mounts.

  5. Harvesting Ornamental Fish From Ponds1 Tina C. Crosby, Jeffrey E. Hill, Carlos V. Martinez, Craig A. Watson, Deborah B. Pouder, and Roy

    E-Print Network [OSTI]

    Watson, Craig A.

    FA-117 Harvesting Ornamental Fish From Ponds1 Tina C. Crosby, Jeffrey E. Hill, Carlos V. Martinez, ornamental fish are predominantly farmed in earthen ponds. Once fish reach marketable size and are ready and physical damage during harvesting (see UF IFAS Circular 919 Stress-Its Role in Fish Disease). Overall, col

  6. Ising Spectroscopy II: Particles and poles at T>Tc

    E-Print Network [OSTI]

    Alexander Zamolodchikov

    2013-10-17

    I discuss particle content of the Ising field theory (the scaling limit of the Ising model in a magnetic field), in particular the evolution of its mass spectrum under the change of the scaling parameter. I consider both real and pure imaginary magnetic field. Here I address the high-temperature regime, where the spectrum of stable particles is relatively simple (there are from one to three particles, depending on the parameter). My goal is to understand analytic continuations of the masses to the domain of the parameter where they no longer exist as the stable particles. I use the natural tool -- the $2\\to 2$ elastic scattering amplitude, with its poles associated with the stable particles, virtual and resonance states in a standard manner. Concentrating attention on the "real" poles (those corresponding to stable and virtual states) I propose a scenario on how the pattern of the poles evolves from the integrable point $T=T_c,\\ H\

  7. Eliminating spurious poles from gauge-theoretic amplitudes

    E-Print Network [OSTI]

    Andrew Hodges

    2009-05-11

    This note addresses the problem of spurious poles in gauge-theoretic scattering amplitudes. New twistor coordinates for the momenta are introduced, based on the concept of dual conformal invariance. The cancellation of spurious poles for a class of NMHV amplitudes is greatly simplified in these coordinates. The poles are eliminated altogether by defining a new type of twistor integral, dual to twistor diagrams as previously studied, and considerably simpler. The geometric features indicate a supersymmetric extension of the formalism at least to all NMHV amplitudes, allowing the dihedral symmetry of the super-amplitude to be made manifest. More generally, the definition of `momentum-twistor' coordinates suggests a powerful new approach to the study of scattering amplitudes.

  8. Pole wave-function renormalization prescription for unstable particles

    E-Print Network [OSTI]

    Yong Zhou

    2007-04-23

    We base a new wave-function renormalization prescription on the pole mass renormalization prescription, in which the Wave-function Renormalization Constant (WRC) is extracted by expanding the particle's propagator around its pole, rather than its physical mass point as convention. We find the difference between the new and the conventional WRC is gauge-parameter dependent for unstable particles beyond one-loop level, which will lead to some physical results gauge dependent under the conventional wave-function renormalization prescription beyond one-loop level.

  9. Methods and apparatus for radially compliant component mounting

    DOE Patents [OSTI]

    Bulman, David Edward (Cincinnati, OH); Darkins, Jr., Toby George (Loveland, OH); Stumpf, James Anthony (Columbus, IN); Schroder, Mark S. (Greenville, SC); Lipinski, John Joseph (Simpsonville, SC)

    2012-03-27

    Methods and apparatus for a mounting assembly for a liner of a gas turbine engine combustor are provided. The combustor includes a combustor liner and a radially outer annular flow sleeve. The mounting assembly includes an inner ring surrounding a radially outer surface of the liner and including a plurality of axially extending fingers. The mounting assembly also includes a radially outer ring coupled to the inner ring through a plurality of spacers that extend radially from a radially outer surface of the inner ring to the outer ring.

  10. A magnetic polarity stratigraphy and a corresponding paleomagnetic pole position

    E-Print Network [OSTI]

    Olsen, Paul E.

    ABSTRACT A magnetic polarity stratigraphy and a corresponding paleomagnetic pole position in mean direction and pass reversal tests.The magnetic polarity sequence consists of 11 magnetozones of outcrop sites have outlined a magnetic polarity stratigraphy (McIntosh et al., 1985; Witte and Kent, 1989

  11. Poles of Intertwining Operators via Endoscopy; the Connection with ...

    E-Print Network [OSTI]

    Freydoon Shahidi

    1910-00-20

    In this paper, we determine the residues at poles of standard intertwining operators for parabolically ...... Here {m1} is as earlier just the M ? ?-conjugacy class and does not denote the projection .... 116 (1994), 1101–1151. 11. Goldberg, D. and ...

  12. The HIPPO (HIAPER Pole-to-Pole Observations) study of the carbon cycle and greenhouse gases measured meteorology, atmospheric chemistry, and aerosol constituents along transects from approximately pole-to-pole

    E-Print Network [OSTI]

    .) · Ancillary flight information, field catalogs, data quality reports, software, and documentation · Pole products and user documentation. Files are in ASCII text format. Products include: · A comprehensive merged structure data: 1) greenhouse gases and carbon cycle gases, 2) ozone and water vapor, 3) black carbon

  13. On the gauge independence of the fermion pole mass

    E-Print Network [OSTI]

    Ashok K. Das; R. R. Francisco; J. Frenkel

    2013-08-23

    We study the question of complete gauge independence of the fermion pole mass by choosing a general class of gauge fixing which interpolates between the covariant, the axial and the Coulomb gauges for different values of the gauge fixing parameters. We derive the Nielsen identity describing the gauge parameter variation of the fermion two point function in this general class of gauges. Furthermore, we relate the denominator of the fermion propagator to the two point function. This then allows us to study directly the gauge parameter dependence of the denominator of the propa- gator using the Nielsen identity for the two point function. This leads to a simple proof that, when infrared divergences and mass shell singularities are not present at the pole, the fermion pole mass is gauge independent, in the complete sense, to all orders in perturbation theory. Namely, the pole is not only independent of the gauge fixing parameters, but has also the same value in both covariant and non-covariant gauges.

  14. Ornamental Stones

    E-Print Network [OSTI]

    Harrell, James A.

    2013-01-01

    Geological Survey of Norway, Special Publication 12, ed.Geological Survey of Norway, Special Publication 12, ed.Geological Survey of Norway, Special Publication 12, ed.

  15. Temporal Geochemical Variations In Volatile Emissions From Mount...

    Open Energy Info (EERE)

    Temporal Geochemical Variations In Volatile Emissions From Mount St Helens, Usa, 1980-1994 Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article:...

  16. An active seismic reconnaissance survey of the Mount Princeton...

    Open Energy Info (EERE)

    An active seismic reconnaissance survey of the Mount Princeton area, Chaffee County, Colorado Jump to: navigation, search OpenEI Reference LibraryAdd to library Thesis: An active...

  17. deep highresolution optical log dust, ash, and stratigraphy South Pole glacial

    E-Print Network [OSTI]

    Woschnagg, Kurt

    deep high­resolution optical log dust, ash, and stratigraphy South Pole glacial Bramall, Bay, Rohde, Price (2005), high­resolution optical dust, stratigraphy South Pole glacial Geophys. Res. Lett

  18. Old Y-12 utility poles put to use for recreation and training...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Old Y-12 utility poles ... Old Y-12 utility poles put to use for recreation and training Posted: May 31, 2012 - 8:25am Maintenance Support and Utilities Management personnel at the...

  19. The South Pole Telescope bolometer array and the measurement of secondary Cosmic Microwave Background anisotropy at small angular scales

    E-Print Network [OSTI]

    Shirokoff, Erik D.

    2011-01-01

    iii 2 The South Pole Telescope 2.1 The Telescope . . . . .modifications . . . . II The South Pole Telescope SZ Cameraand exciting as the South Pole Telescope. Fewer still do so

  20. LETTER Earth Planets Space, 55, 153157, 2003 Asymmetric behavior of magnetic dip poles

    E-Print Network [OSTI]

    Dormy, Emmanuel

    LETTER Earth Planets Space, 55, 153­157, 2003 Asymmetric behavior of magnetic dip poles M. Mandea (Received November 8, 2002; Revised February 3, 2003; Accepted March 3, 2003) The north magnetic dip pole the dipolar field as a whole, but only the north magnetic pole. We demonstrate how this rapid displacement

  1. Reconciling Cretaceous paleomagnetic and marine magnetic data for Iberia: New Iberian paleomagnetic poles

    E-Print Network [OSTI]

    Cattin, Rodolphe

    poles M. Neres,1 E. Font,1 J. M. Miranda,1 P. Camps,2 P. Terrinha,3 and J. Mirão4 Received 29 November is to reconcile Iberian paleomagnetic data with paleomagnetic data of the neighboring plates and with Euler poles arises from the paucity of reliable paleomagnetic poles with satisfactory statistical criteria and age

  2. Cu, Cr and As distribution in soils adjacent to pressure-treated decks, fences and poles

    E-Print Network [OSTI]

    Ma, Lena

    Cu, Cr and As distribution in soils adjacent to pressure-treated decks, fences and poles Tait with depth in areas close to CCA-treated poles. Abstract Chromated copper arsenate (CCA)-treated wood has), and copper (Cu), in soils surrounding CCA-treated wood structures such as decks, fences and poles; and (2

  3. BANDPASS ADAPTIVE POLE-ZERO FILTERING John J. ShynkBernardWidrow

    E-Print Network [OSTI]

    Widrow, Bernard

    BANDPASS ADAPTIVE POLE-ZERO FILTERING John J. ShynkBernardWidrow Information Systems Laboratory Department of Electrical Engineering Stanford University Stanford, CA 94305 Abstract - An adaptive pole filterspermittheadaptivefiltertoberealizedina parallel form of first-ordersections. Simple monitoring of thefilter poles duringadaptation

  4. Noncollinear second-harmonic generation in sub-micrometer-poled RbTiOPO4

    E-Print Network [OSTI]

    Arie, Ady

    Noncollinear second-harmonic generation in sub-micrometer-poled RbTiOPO4 S. Moscovich, A. Arie, R generated noncollinear quasi-phase-matched second harmonic wave in an RbTiOPO4 crystal that was poled using systematic nonlinear frequency conversion study of samples produced by the HV-AFM method. The short poling

  5. DISCRETE-TIME ROBUST POLE-PLACEMENT DESIGN THROUGH GLOBAL OPTIMIZATION

    E-Print Network [OSTI]

    Neumaier, Arnold

    DISCRETE-TIME ROBUST POLE-PLACEMENT DESIGN THROUGH GLOBAL OPTIMIZATION Miguel Ayala Botto ,1 Robert-mail: r.babuska@its.tudelft.nl Abstract: A robust pole placement controller design method is presented Keywords: robust control, pole assignment, uncertainty, genetic algorithms, helicopter dynamics. 1

  6. Nested Saturation with Guaranteed Real Poles1 Eric N. Johnson2

    E-Print Network [OSTI]

    Johnson, Eric N.

    Nested Saturation with Guaranteed Real Poles1 Eric N. Johnson2 and Suresh K. Kannan 3 School the special case of n- integrators with one input. Using this law however, the closed loop system pole of the closed loop poles on the negative real axis. 1 Introduction The problem addressed involves the global

  7. Double-Pole Approximation in Time-Dependent Density Functional Theory

    E-Print Network [OSTI]

    Gross, E.K.U.

    Double-Pole Approximation in Time-Dependent Density Functional Theory H. Appel and E.K.U. Gross-dependent density func- tional theory (TDDFT) is given. This extends the single-pole approximation (SPA) to two strongly- coupled poles. The analysis provides both an illustration of how TDDFT works when strong exchange

  8. Texture evolution of vertically aligned biaxial tungsten nanorods using RHEED surface pole figure technique

    E-Print Network [OSTI]

    Wang, Gwo-Ching

    Texture evolution of vertically aligned biaxial tungsten nanorods using RHEED surface pole figure biaxial tungsten nanorods using RHEED surface pole figure technique R Krishnan1 , Y Liu2 , C Gaire2 , L (RHEED) pole figure technique. The initial polycrystalline film begins to show the inception of biaxial

  9. Microsymposium 34, MS065, 2001 PERMANENTLY SHADOWED AREAS AT THE LUNAR POLES. V. V. Shevchenko1

    E-Print Network [OSTI]

    Shevchenko, Vladislav

    Microsymposium 34, MS065, 2001 PERMANENTLY SHADOWED AREAS AT THE LUNAR POLES. V. V. Shevchenko1 , E a maximum of 1,95° above the horizon at the lunar poles. Therefore topographic depressions near the lunar poles may contain water ice deposits. We have used the Morphological catalogue of the craters

  10. BUCKLING BEHAVIOUR OF WOODEN POLES J. Savic" S.H. Rizkalla2

    E-Print Network [OSTI]

    BUCKLING BEHAVIOUR OF WOODEN POLES by J. Savic" S.H. Rizkalla2 , D. Polyzois3 , and C. K. Wong' ABSTRACT Woodc:n poles are popular structural elements currently used by Manitoba Hydro for distribution lines and transmission towers. In recent years, a considerable number of such poles have failed duc

  11. All-Pole Modelling of Mixed Excitation Signals Peter Kabal 1 and Bastiaan Kleijn 2

    E-Print Network [OSTI]

    Kabal, Peter

    All-Pole Modelling of Mixed Excitation Signals Peter Kabal 1 and Bastiaan Kleijn 2 1 Dept of a noise-like excitation and a periodic ex- citation. As such it is an extension of the Discrete All-Pole, the Discrete All-Pole (DAP) model introduced by El-Jaroudi and Makhoul [1] provides a frame- work for modelling

  12. Structures of resonances and poles in isoscattering microwave networks and graphs

    E-Print Network [OSTI]

    Structures of resonances and poles in isoscattering microwave networks and graphs M. Lawniczak1, A of resonances and poles of the determinant of the scattering matrices [3]. Using these characteristics we study the poles of the amplitude of the determinant of the theoretically evaluated scattering matrix

  13. Barycentric rational interpolation with no poles and high rates of approximation

    E-Print Network [OSTI]

    Hormann, Kai

    Barycentric rational interpolation with no poles and high rates of approximation Michael S. Floater to control the occurrence of poles. In this paper we propose and study a family of barycentric rational inter- polants that have no real poles and arbitrarily high approximation orders on any real interval, regardless

  14. IEEETJMNSACTIONSONAUTOMATICCONTROL,VOL. 34, NO. 3, MARCH 1989 367 CERTAINTY EQUIVALENCE POLE-ASSIGNMENT

    E-Print Network [OSTI]

    Moore, John Barratt

    IEEETJMNSACTIONSONAUTOMATICCONTROL,VOL. 34, NO. 3, MARCH 1989 367 CERTAINTY EQUIVALENCE POLE-ASSIGNMENT :; ~ :.. . .. . .. . . . . .. . . . . . . . . . . . . . . . . . . . . .. . .. . . .. .. . . . . a u 0 m w 0, WI :? y o A ..0 10 .20 30 40 50 TIME (a) CAUTIOUS POLE-ASSIGNMENT t I v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 20 30 40 50 TIME (b) CENTRAL TENOENCY POLE-ASSIGNMENT o t . m : u !. No g

  15. Exact WKB analysis of a Schrodinger equation with a merging triplet of two simple poles and

    E-Print Network [OSTI]

    RIMS­1735 Exact WKB analysis of a SchrË?odinger equation with a merging triplet of two simple poles #12; Exact WKB analysis of a SchrË?odinger equation with a merging triplet of two simple poles and one WKB analysis of an M2P1T (merging two simple poles and one simple turning point) SchrË?odinger equation

  16. Soliton Solutions with Real Poles in the Alekseev formulation of the Inverse-Scattering method

    E-Print Network [OSTI]

    Soliton Solutions with Real Poles in the Alekseev formulation of the Inverse-Scattering method S of Alekseev is presented which permits real-pole soliton solutions of the Ernst equations to be considered. This is achieved by adopting distinct real poles in the scattering matrix and its inverse. For the case in which

  17. TREND a low noise terahertz receiver user instrument for AST/RO at the South Pole

    E-Print Network [OSTI]

    Yngvesson, K. Sigfrid

    TREND ­ a low noise terahertz receiver user instrument for AST/RO at the South Pole Eyal Gerechta diameter AST/RO submillimeter wave telescope at the Amundsen/Scott South Pole Station. TREND is scheduled of special interest. The South Pole Station is the best available site for THz observations due to the very

  18. Astronomical Coordinate Systems \\What good are Mercator's North Poles and Equators

    E-Print Network [OSTI]

    Walter, Frederick M.

    CEN 511 Astronomical Coordinate Systems \\What good are Mercator's North Poles and Equators Tropics conversions. Celestial Based on the terrestrial globe. The Celestial equator and poles are projections of the terrestrial equator and poles. Celestial coordinates are measured in Right Ascension (RA; ), along the equator

  19. Jacobi-Davidson Methods and Preconditioning with Applications in Pole-zero Analysis

    E-Print Network [OSTI]

    Eindhoven, Technische Universiteit

    Jacobi-Davidson Methods and Preconditioning with Applications in Pole-zero Analysis J. Rommes 1 , H equation. 1 Introduction Pole-zero analysis is used in electrical engineering to analyze the stability of electric circuits [6, 9]. For example, if a circuit is designed to be an oscillator, pole-zero analysis

  20. Vol. 103, No. 1 DUKE MATHEMATICAL JOURNAL 2000 PERTURBATION OF SCATTERING POLES FOR HYPERBOLIC

    E-Print Network [OSTI]

    Petridis, Yiannis

    Vol. 103, No. 1 DUKE MATHEMATICAL JOURNAL © 2000 PERTURBATION OF SCATTERING POLES FOR HYPERBOLIC spectrum, a crucial role is played by the scattering poles. They appear in the analog of Weyl's law is the fact that imbedded eigenvalues become scattering poles under perturbation (see [25]). In this work we

  1. The Application of Preconditioned Jacobi-Davidson Methods in Pole-zero

    E-Print Network [OSTI]

    Eindhoven, Technische Universiteit

    The Application of Preconditioned Jacobi-Davidson Methods in Pole-zero Analysis J. Rommes 1 , C will be given. 1 Introduction Pole-zero analysis is used in electrical engineering to analyse the stability of electric circuits [10,11,14]. For example, if a circuit is designed to be an os- cillator, pole

  2. Achievable performance of multivariable systems with unstable zeros and poles K. HAVRE{{ and S. SKOGESTAD{*

    E-Print Network [OSTI]

    Skogestad, Sigurd

    Achievable performance of multivariable systems with unstable zeros and poles K. HAVRE{{ and S) zeros and poles in multivariable feedback systems. We generalize previously known controller depend on the plant G. The bounds are tight for cases with only one RHP-zero or pole. For plants with RHP

  3. Resonance poles in the complex-frequency domain for an oscillating barrier R. Lefebvre*

    E-Print Network [OSTI]

    Moiseyev, Nimrod

    Resonance poles in the complex-frequency domain for an oscillating barrier R. Lefebvre* Laboratoire picture applied to a periodic Hamiltonian. It is possible to interpret it as due to the poles use of the data obtained for the static barrier. The existence of these poles is not limited

  4. The Phylogenetic Origin of oskar Coincided with the Origin of Maternally Provisioned Germ Plasm and Pole

    E-Print Network [OSTI]

    Fussman, Gregor

    and Pole Cells at the Base of the Holometabola Jeremy A. Lynch1 *, Orhan O¨ zu¨ ak1 , Abderrahman Khila2 at the posterior pole of the oocyte. The gene oskar (osk) is both necessary and sufficient for assembling and pole cells at the base of the holometabolous insects and that losses of osk are correlated with changes

  5. TUNA: Pole-and-Line Fishing Trials In Central and Western Pacific

    E-Print Network [OSTI]

    TUNA: Pole-and-Line Fishing Trials In Central and Western Pacific R.N . Uchida and R .F . Sumida baiting and fishing data obtained aboard the Honolulu -based pole -and -line fishing vessel 'Anela in 1971 for the Angel Fishing Company of Honolulu. It was designed for pole -and - line fishing with live

  6. Transient Simulation of On-Chip Transmission Lines via Exact Pole Extraction

    E-Print Network [OSTI]

    Friedman, Eby G.

    Transient Simulation of On-Chip Transmission Lines via Exact Pole Extraction Guoqing Chen and Eby G response at the far end of a transmission line is proposed in this paper. Unlike approximating the poles by truncating the transfer function or matching moments, the exact poles of an interconnect system

  7. Permanent shadow in simple craters near the lunar poles D. Ben J. Bussey,1

    E-Print Network [OSTI]

    Spudis, Paul D.

    Permanent shadow in simple craters near the lunar poles D. Ben J. Bussey,1 Paul G. Lucey,1 Donovan, 7500 km2 and 6500 km2 , for the north and south pole respectively. These values were obtained, to investigate the size and latitudinal extent of permanently shadowed regions near the lunar poles. Craters

  8. June 15, 1996 / Vol. 21, No. 12 / OPTICS LETTERS 857 Photorefractive effects in periodically poled ferroelectrics

    E-Print Network [OSTI]

    Fejer, Martin M.

    June 15, 1996 / Vol. 21, No. 12 / OPTICS LETTERS 857 Photorefractive effects in periodically poled-state photorefractive index perturbations caused by a given optical irradiance distribution in a periodically poled are reduced compared with those in a homogeneously poled crystal by approximately the square of the product

  9. Exact WKB analysis of a Schrodinger equation with a merging triplet of two simple poles and

    E-Print Network [OSTI]

    RIMS-1735 Exact WKB analysis of a Schr¨odinger equation with a merging triplet of two simple poles #12;Exact WKB analysis of a Schr¨odinger equation with a merging triplet of two simple poles and one WKB analysis of an M2P1T (merging two simple poles and one simple turning point) Schr¨odinger equation

  10. South Pole Telescope Software Systems: Control, Monitoring, and Data Acquisition

    E-Print Network [OSTI]

    Story, K; Ade, P; Aird, K A; Austermann, J E; Beall, J A; Becker, D; Bender, A N; Benson, B A; Bleem, L E; Britton, J; Carlstrom, J E; Chang, C L; Chiang, H C; Cho, H-M; Crawford, T M; Crites, A T; Datesman, A; de Haan, T; Dobbs, M A; Everett, W; Ewall-Wice, A; George, E M; Halverson, N W; Harrington, N; Henning, J W; Hilton, G C; Holzapfel, W L; Hoover, S; Huang, N; Hubmayr, J; Irwin, K D; Karfunkle, M; Keisler, R; Kennedy, J; Lee, A T; Li, D; Lueker, M; Marrone, D P; McMahon, J J; Mehl, J; Meyer, S S; Montgomery, J; Montroy, T E; Nagy, J; Natoli, T; Nibarger, J P; Niemack, M D; Novosad, V; Padin, S; Pryke, C; Reichardt, C L; Ruhl, J E; Saliwanchik, B R; Sayre, J T; Schaffer, K K; Shirokoff, E; Smecher, G; Stalder, B; Tucker, C; Vanderlinde, K; Vieira, J D; Wang, G; Williamson, R; Yefremenko, V; Yoon, K W; Young, E; 10.1117/12.925808

    2012-01-01

    We present the software system used to control and operate the South Pole Telescope. The South Pole Telescope is a 10-meter millimeter-wavelength telescope designed to measure anisotropies in the cosmic microwave background (CMB) at arcminute angular resolution. In the austral summer of 2011/12, the SPT was equipped with a new polarization-sensitive camera, which consists of 1536 transition-edge sensor bolometers. The bolometers are read out using 36 independent digital frequency multiplexing (\\dfmux) readout boards, each with its own embedded processors. These autonomous boards control and read out data from the focal plane with on-board software and firmware. An overall control software system running on a separate control computer controls the \\dfmux boards, the cryostat and all other aspects of telescope operation. This control software collects and monitors data in real-time, and stores the data to disk for transfer to the United States for analysis.

  11. HADES - Hydrophone for Acoustic Detection at South Pole

    E-Print Network [OSTI]

    Benjamin Semburg; for the IceCube Collaboration

    2008-11-07

    The South Pole Acoustic Test Setup (SPATS) is located in the upper part of the optical neutrino observatory IceCube, currently under construction. SPATS consists of four strings at depths between 80 m and 500 m below the surface of the ice with seven stages per string. Each stage is equipped with an acoustic sensor and a transmitter. Three strings (string A-C) were deployed in the austral summer 2006/07. SPATS was extended by a fourth string (string D) with second generation sensors and transmitters in 2007/08. One second generation sensor type HADES (Hydrophone for Acoustic Detection at South Pole) consists of a ring-shaped piezo-electric element coated with polyurethane. The development of the sensor, optimization of acoustic transmission by acoustic impedance matching and first in-situ results will be discussed.

  12. Automatic Pole and Q-Value Extraction for RF Structures

    SciTech Connect (OSTI)

    C. Potratz, H.-W. Glock, U. van Rienen, F. Marhauser

    2011-09-01

    The experimental characterization of RF structures like accelerating cavities often demands for measuring resonant frequencies of Eigenmodes and corresponding (loaded) Q-values over a wide spectral range. A common procedure to determine the Q-values is the -3dB method, which works well for isolated poles, but may not be applicable directly in case of multiple poles residing in close proximity (e.g. for adjacent transverse modes differing by polarization). Although alternative methods may be used in such cases, this often comes at the expense of inherent systematic errors. We have developed an automation algorithm, which not only speeds up the measurement time significantly, but is also able to extract Eigenfrequencies and Q-values both for well isolated and overlapping poles. At the same time the measurement accuracy may be improved as a major benefit. To utilize this procedure merely complex scattering parameters have to be recorded for the spectral range of interest. In this paper we present the proposed algorithm applied to experimental data recorded for superconducting higher-order-mode damped multi-cell cavities as an application of high importance.

  13. Pole-phase modulated toroidal winding for an induction machine

    DOE Patents [OSTI]

    Miller, John Michael (Saline, MI); Ostovic, Vlado (Weinheim, DE)

    1999-11-02

    A stator (10) for an induction machine for a vehicle has a cylindrical core (12) with inner and outer slots (26, 28) extending longitudinally along the inner and outer peripheries between the end faces (22, 24). Each outer slot is associated with several adjacent inner slots. A plurality of toroidal coils (14) are wound about the core and laid in the inner and outer slots. Each coil occupies a single inner slot and is laid in the associated outer slot thereby minimizing the distance the coil extends from the end faces and minimizing the length of the induction machine. The toroidal coils are configured for an arbitrary pole phase modulation wherein the coils are configured with variable numbers of phases and poles for providing maximum torque for cranking and switchable to a another phase and pole configuration for alternator operation. An adaptor ring (36) circumferentially positioned about the stator improves mechanical strength, and provides a coolant channel manifold (34) for removing heat produced in stator windings during operation.

  14. Integrated fiducial sample mount and software for correlated microscopy

    SciTech Connect (OSTI)

    Timothy R McJunkin; Jill R. Scott; Tammy L. Trowbridge; Karen E. Wright

    2014-02-01

    A novel design sample mount with integrated fiducials and software for assisting operators in easily and efficiently locating points of interest established in previous analytical sessions is described. The sample holder and software were evaluated with experiments to demonstrate the utility and ease of finding the same points of interest in two different microscopy instruments. Also, numerical analysis of expected errors in determining the same position with errors unbiased by a human operator was performed. Based on the results, issues related to acquiring reproducibility and best practices for using the sample mount and software were identified. Overall, the sample mount methodology allows data to be efficiently and easily collected on different instruments for the same sample location.

  15. Piezoelectric resonator assembly with thin molybdenum mounting clips

    DOE Patents [OSTI]

    Peters, R. Donald (Pinellas Park, FL)

    1981-01-01

    A resonator mounting assembly wherein the resonator blank is mounted agai an essentially planar surface presented by a plurality of peripherally disposed mounting clips and bonded to this surface to provide substantially all the mechanical support for the blank in a direction normal to the major faces of the resonator blank, while being flexible in the directions parallel to said major faces so as to minimize radial stresses on the resonator blank, particularly during thermal cycling of the resonator assembly. The clips are fabricated of a low thermal expansion material, such as molybdenum, which also has considerable yield strength after exposure to processing temperatures; the bonding of the clips to the edges of the resonator blank can be achieved by a polyimide containing electrically conductive particles.

  16. Rolling contact mounting arrangement for a ceramic combustor

    DOE Patents [OSTI]

    Boyd, Gary L. (328 Sneath Way, Alpine, CA 91901); Shaffer, James E. (1780 Geronimo Tr., Maitland, FL 32751)

    1995-01-01

    A combustor assembly having a preestablished rate of thermal expansion is mounted within a gas turbine engine housing having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the combustor assembly. The combustor assembly is constructed of a inlet end portion, a outlet end portion and a plurality of combustor ring segments positioned between the end portions. A mounting assembly is positioned between the combustor assembly and the gas turbine engine housing to allow for the difference in the rate of thermal expansion while maintaining axially compressive force on the combustor assembly to maintain contact between the separate components.

  17. Rolling contact mounting arrangement for a ceramic combustor

    DOE Patents [OSTI]

    Boyd, G.L.; Shaffer, J.E.

    1995-10-17

    A combustor assembly having a preestablished rate of thermal expansion is mounted within a gas turbine engine housing having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the combustor assembly. The combustor assembly is constructed of a inlet end portion, a outlet end portion and a plurality of combustor ring segments positioned between the end portions. A mounting assembly is positioned between the combustor assembly and the gas turbine engine housing to allow for the difference in the rate of thermal expansion while maintaining axially compressive force on the combustor assembly to maintain contact between the separate components. 3 figs.

  18. Lunar Rover Solar Panel MountTeam Members: Tian Le, Tudor Boiangiu, Jeremy Chan, James Haensel To develop a mechanized mount for a solar panel to

    E-Print Network [OSTI]

    Sun, Yu

    Lunar Rover Solar Panel MountTeam Members: Tian Le, Tudor Boiangiu, Jeremy Chan, James Haensel To develop a mechanized mount for a solar panel to be mounted on a lunar rover. Must be: · capable of orienting panel towards sun · reside on mast extending vertically from rover · capable of unfurling solar

  19. RESULTSRESULTS Assisted in selection of APU mounting configuration on truck

    E-Print Network [OSTI]

    Carver, Jeffrey C.

    Motion Fuel Cell Auxiliary Power Unit (APU): Dynamic ModelingFuel Cell Auxiliary Power Unit (APU@coe.eng.ua.edu OBJECTIVESOBJECTIVES ·Develop a computer model to predict the vibratory response of the fuel cell APU components ·Use MOTIVATIONMOTIVATION Guide the development of a method to isolate the truck-mounted Fuel Cell APU from potentially

  20. Sabah barge-mounted power plant in service

    SciTech Connect (OSTI)

    Barker, T.

    1995-03-01

    The world`s largest barge-mounted simple-cycle power plant, constructed by the Sabah Shipyards in Malaysia, is now in service in the Philippines. Construction of similar barges from Westinghouse should begin shortly. This paper discusses in brief the projects in progress at present and prospects in the Asian market from the perspective of the manufacturers.

  1. Purchasing Energy-Efficient Ceiling-Mounted Fluorescent Luminaires

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance for ceiling-mounted fluorescent luminaires, a product category covered by FEMP efficiency requirements. Federal laws and requirements mandate that agencies purchase ENERGY STAR-qualified or FEMP-designated products in all product categories covered by these programs and in any acquisition actions that are not specifically exempted by law.

  2. SNAP sky background at the north ecliptic pole

    SciTech Connect (OSTI)

    Aldering, Greg

    2002-07-01

    I summarize the extant direct and indirect data on the sky background SNAP will see at the North Ecliptic Pole over the wavelength range 0.4 < {lambda} < 1.7 {micro}m. At the spatial resolution of SNAP the sky background due to stars and galaxies is resolved, so the only source considered is zodiacal light. Several models are explored to provide interpolation in wavelength between the broadband data from HST and COBE observations. I believe the input data are now established well enough that the accuracy of the sky background presented here is sufficient for SNAP simulations, and that it will stand up to scrutiny by reviewers.

  3. Pole placement design for linear multivariable control systems 

    E-Print Network [OSTI]

    Keel, Leehyun

    1982-01-01

    . 8893 32. 6274 -48. 5512 -108. 257 6. 93611 36. 2073 -43. 4464. -45. 3662 -13. 3483 -60. 2753 27. 2660 -0. 75720 ? ZO. 6834 -Z5. 3096 5. 45564 -3. 32199 14. . 0371 Condition No. of X = 9249. 36803 Closed Loop System Poles -3. 50001-3. 49998jy -3.... 50001+3. 49998j -2. 00005-1. 99998j& -2. 00005+1. 99998j -2 49994-2. 49995js -2 49994+ 2 49995j -4 . 99940-0, 99980j, -4 . 99940+0 . 99980j -4. 50091 -4. 00025 B the new al orithm tt com anion form 0, -1146600 ? 2341990 -2286968 -1288684 -576460...

  4. Edge Detection, Cosmic Strings and the South Pole Telescope

    E-Print Network [OSTI]

    Andrew Stewart; Robert Brandenberger

    2009-01-07

    We develop a method of constraining the cosmic string tension $G\\mu$ which uses the Canny edge detection algorithm as a means of searching CMB temperature maps for the signature of the Kaiser-Stebbins effect. We test the potential of this method using high resolution, simulated CMB temperature maps. By modeling the future output from the South Pole Telescope project (including anticipated instrumental noise), we find that cosmic strings with $G\\mu > 5.5\\times10^{-8}$ could be detected.

  5. Kinematic dynamo wave in the vicinity of the solar poles

    E-Print Network [OSTI]

    Victor Galitski; D. D. Sokoloff

    2001-04-27

    We consider a dynamo wave in the solar convective shell for the kinematic $\\alpha\\omega$-dynamo model. The spectrum and eigenfunctions of the corresponding equations are derived analytically with the aid of the WKB method. Our main aim here is to investigate the dynamo wave behavior in the vicinity of the solar poles. Explicit expressions for the incident and reflected waves are obtained. The reflected wave is shown to be relatively weak in comparison to the incident wave. The phase shifts and the ratio of amplitudes of the two waves are found.

  6. North Pole, Alaska: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland:NPI VenturesNew Hampshire:source History ViewLittlePerry, Ohio:NorthPole,

  7. Assessment of LED Technology in Ornamental Post-Top Luminaires (Host Site: Sacramento, CA)

    SciTech Connect (OSTI)

    Tuenge, Jason R.

    2011-12-01

    The DOE Municipal Solid-State Street Lighting Consortium has evaluated four different LED replacements for existing ornamental post-top street lights in Sacramento, California. The project team was composed of the City and its consultant, PNNL (representing the Consortium), and the Sacramento Municipal Utility District. Product selection was finalized in March 2011, yielding one complete luminaire replacement and three lamp-ballast retrofit kits. Computer simulations, field measurements, and laboratory testing were performed to compare the performance and cost-effectiveness of the LED products relative to the existing luminaire with 100 W high-pressure sodium lamp. After it was confirmed the LED products were not equivalent to HPS in terms of initial photopic illumination, the following parameters were scaled proportionally to enable equitable (albeit hypothetical) comparisons: light output, input wattage, and pricing. Four replacement scenarios were considered for each LED product, incorporating new IES guidance for mesopic multipliers and lumen maintenance extrapolation, but life cycle analysis indicated cost effectiveness was also unacceptable. Although LED efficacy and pricing continue to improve, this project serves as a timely and objective notice that LED technology may not be quite ready yet for such applications.

  8. DISCOVERY OF FOG AT THE SOUTH POLE OF TITAN

    SciTech Connect (OSTI)

    Brown, M. E.; Smith, A. L.; Chen, C.; Adamkovics, M.

    2009-11-20

    While Saturn's moon Titan appears to support an active methane hydrological cycle, no direct evidence for surface-atmosphere exchange has yet appeared. The indirect evidence, while compelling, could be misleading. It is possible, for example, that the identified lake features could be filled with ethane, an involatile long-term residue of atmospheric photolysis; the apparent stream and channel features could be ancient remnants of a previous climate; and the tropospheric methane clouds, while frequent, could cause no rain to reach the surface. We report here the detection of fog at the south pole of Titan during late summer using observations from the VIMS instrument on board the Cassini spacecraft. While terrestrial fog can form from a variety of causes, most of these processes are inoperable on Titan. Fog on Titan can only be caused by evaporation of nearly pure liquid methane; the detection of fog provides the first direct link between surface and atmospheric methane. Based on the detections presented here, liquid methane appears widespread at the south pole of Titan in late southern summer, and the hydrological cycle on Titan is currently active.

  9. Discovery of fog at the south pole of Titan

    E-Print Network [OSTI]

    Brown, M E; Chen, C; Adamkovics, M

    2009-01-01

    While Saturn's moon Titan appears to support an active methane hydrological cycle, no direct evidence for surface-atmosphere exchange has yet appeared. It is possible that the identified lake-features could be filled with ethane, an involatile long term residue of atmospheric photolysis; the apparent stream and channel features could be ancient from a previous climate; and the tropospheric methane clouds, while frequent, could cause no rain to reach the surface. We report here the detection of fog at the south pole of Titan during late summer using observations from the VIMS instrument on board the Cassini spacecraft. While terrestrial fog can form from a variety of causes, most of these processes are inoperable on Titan. Fog on Titan can only be caused by evaporation of liquid methane; the detection of fog provides the first direct link between surface and atmospheric methane. Based on the detections presented here, liquid methane appears widespread at the south pole of Titan in late southern summer, and the...

  10. Pole placement design for quantum systems via coherent observers

    E-Print Network [OSTI]

    Zibo Miao; Matthew R. James; Valery A. Ugrinovskii

    2015-09-17

    We previously extended Luenberger's approach for observer design to the quantum case, and developed a class of coherent observers which tracks linear quantum stochastic systems in the sense of mean values. In light of the fact that the Luenberger observer is commonly and successfully applied in classical control, it is interesting to investigate the role of coherent observers in quantum feedback. As the first step in exploring observer-based coherent control, in this paper we study pole-placement techniques for quantum systems using coherent observers, and in such a fashion, poles of a closed-loop quantum system can be relocated at any desired locations. In comparison to classical feedback control design incorporating the Luenberger observer, here direct coupling between a quantum plant and the observer-based controller are allowed to enable a greater degree of freedom for the design of controller parameters. A separation principle is presented, and we show how to design the observer and feedback independently to be consistent with the laws of quantum mechanics. The proposed scheme is applicable to coherent feedback control of quantum systems, especially when the transient dynamic response is of interest, and this issue is illustrated in an example.

  11. O.A.R. 734-055 - Pole Lines, Buried Cables, Pipe lines, Signs...

    Open Energy Info (EERE)

    and Operations (1981). Retrieved from "http:en.openei.orgwindex.php?titleO.A.R.734-055-PoleLines,BuriedCables,Pipelines,Signs,Misc.FacilitiesandOperations...

  12. Apparatus for mounting photovoltaic power generating systems on buildings

    DOE Patents [OSTI]

    Russell, Miles C. (Lincoln, MA)

    2009-08-18

    Rectangular photovoltaic (PV) modules are mounted on a building roof by mounting stands that are distributed in rows and columns. Each stand comprises a base plate and first and second different height brackets attached to opposite ends of the base plate. Each first and second bracket comprises two module-support members. One end of each module is pivotally attached to and supported by a first module-support member of a first bracket and a second module-support member of another first bracket. At its other end each module rests on but is connected by flexible tethers to module-support members of two different second brackets. The tethers are sized to allow the modules to pivot up away from the module-support members on which they rest to a substantially horizontal position in response to wind uplift forces.

  13. Design of Energy Scavengers Mounted on Rotating Shafts

    E-Print Network [OSTI]

    Shahruz, S M

    2008-01-01

    In this paper, a novel energy scavenger is proposed. The scavenger consists of a cantilever beam on which piezoelectric films and a mass are mounted. The mass at the tip of the beam is known as the proof mass and the device is called either an energy scavenger or a beam-mass system. The beam-mass system is mounted on a rotating shaft, where the axis of the shaft is horizontal. A single-degree-of-freedom (SDOF) mathematical model is derived for the scavenger and its properties are carefully examined. From the model, it becomes clear that the rotation of the shaft and gravity cause both parametric excitations and exogenous forces which make the beam-mass system vibrate. Guidelines are provided as how to choose the scavenger parameters in order to have it resonate. Examples are given to illustrate the performance of the proposed scavenger.

  14. Fractional-Slot Surface Mounted PM Motors with Concentrated Windings for HEV Traction Drives

    SciTech Connect (OSTI)

    Bailey, J.M.

    2005-10-24

    High-power density and efficiency resulting from elimination of rotor windings and reduced magnetic-flux losses have made the rare earth permanent magnet (PM) motor a leading candidate for the Department of Energy's Office of FreedomCAR and Vehicle Technologies (FCVTs) traction drive motor. These traction drives are generally powered by radial-gap motors, having the magnets on or embedded in a rotating cylinder separated from the inside surface of a slotted cylindrical stator by an annular gap. The two main types of radial-gap PM rotors are those with magnets mounted on the surface of a supporting back iron, called PM surface mounted (PMSM) motors, and those with magnets mounted in slots in the rotor, called interior PM (IPM) motors. Most early PM motor research was on the PMSM motor, which was thought to have an inherently low stator inductance. A low stator inductance can lead to currents dangerously exceeding rated current as the back-emf across the inductance increases with speed; consequently, part of the attempted solution has been to increase the stator inductance to reduce the rate of current rise. Although analysis suggested that there should be no problem designing sufficiently high stator inductance into PMSMs, attempts to do so were often not successful and a motor design was sought that would have a higher intrinsic inductance. Commercial research at Toyota has focused on IPM motors because they can achieve a high-saliency ratio, which helps them operate over a high constant power speed ratio (CPSR), but they are more difficult to fabricate. The Oak Ridge National Laboratory's (ORNL) position has been to continue research on brushless direct current (dc) motors (BDCMs) because of ease of fabrication and increased power output. Recently there has been a revival of interest in a fractional-slot PMSMs [15] made with concentrated windings because they possess three important features. First, they can increase the motor's inductance sufficiently to reduce the characteristic current to value of the rated current, which will enable them to operate at high CPSR. This feature also limits short-circuit fault currents. Second, their segmented structure simplifies assembly problems and is expected to reduce assembly costs. Third, the back-emf waveform is nearly sinusoidal with low cogging. To examine in depth this design ORNL entered into a collaborative agreement with the University of Wisconsin to build and test a 6 kW laboratory demonstration unit. Design, fabrication, and testing of the unit to 4000 rpm were completed during FY 2005. The motor will be sent to ORNL to explore ways to control its inverter to achieve higher efficiency during FY 2006. This paper first reviews the concept of characteristic current and what is meant by optimal flux weakening. It then discusses application of the fractional-slot concentrated winding technique to increase the d-axis inductance of a PMSM showing how this approach differs from an integral-slot motor with sinusoidal-distributed windings. This discussion is followed by a presentation of collaborative analyses and comparison with the University of Wisconsin's measured data on a 6 kW, 36-slot, 30-pole motor with concentrated windings. Finally ORNL presents a PMSM design with integral-slot windings that appears to meet the FreedomCAR Specifications, but has some disadvantages. Further collaboration with the University of Wisconsin is planned for FY 2006 to design a motor that meets FreedomCAR specifications.

  15. Test probe for surface mounted leadless chip carrier

    DOE Patents [OSTI]

    Meyer, Kerry L. (Raytown, MO); Topolewski, John (Lenexa, KS)

    1989-05-23

    A test probe for a surface mounted leadless chip carrier is disclosed. The probed includes specially designed connector pins which allow size reductions in the probe. A thermoplastic housing provides spring action to ensure good mechanical and electrical contact between the pins and the contact strips of a leadless chip carrier. Other features include flexible wires molded into the housing and two different types of pins alternately placed in the housing. These features allow fabrication of a smaller and simpler test probe.

  16. Mount Arlington, New Jersey: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformation MontanaOhio:Hill,Morrisville,Mount Airy,

  17. Mount Healthy Heights, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformation MontanaOhio:Hill,Morrisville,Mount

  18. Mount Holly, Vermont: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformation MontanaOhio:Hill,Morrisville,MountHealthy, Ohio:

  19. Mount Horeb, Wisconsin: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformation MontanaOhio:Hill,Morrisville,MountHealthy,

  20. Mount Lebanon, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformation MontanaOhio:Hill,Morrisville,MountHealthy,Ivy,

  1. Head-mounted mobility aid for low vision using scene classification techniques M R Everingham1

    E-Print Network [OSTI]

    Everingham, Mark

    Head-mounted mobility aid for low vision using scene classification techniques M R Everingham1 , B by over 100% using the system. Keywords: Low Vision, Mobility Aids, Head Mounted Display, Object-network classifier is used to identify objects in images from a head mounted camera so that scene content

  2. Converting Commodity Head-Mounted Displays for Optical See-Through Augmented Reality

    E-Print Network [OSTI]

    Pollefeys, Marc

    head-mounted display. Project achieves wide field of view and low latency augmented reality displayConverting Commodity Head-Mounted Displays for Optical See-Through Augmented Reality The Challenge The current market for fully immersive virtual reality head- mounted displays is rapidly expanding, however

  3. Design of a polarized head-mounted projection display using ferroelectric liquid-crystal-on-silicon

    E-Print Network [OSTI]

    Hua, Hong

    - gravated in head-mounted projection displays in which multiple beam splitting and low retroreflectanceDesign of a polarized head-mounted projection display using ferroelectric liquid 2008 It has been a common problem in optical see-through head-mounted displays that the displayed image

  4. Ceiling-mounted Projector with 5200 ANSI lumens Large motorized screen

    E-Print Network [OSTI]

    Hutcheon, James M.

    Room 111 Ceiling-mounted Projector with 5200 ANSI lumens Large motorized screen Wireless-mounted Projector with 3500 ANSI lumens Pull-down screen Wireless microphones available Laptop running Windows 7 Mac users must bring VGA or HDMI adapter Auditorium Ceiling-mounted Projector with 7000 ANSI lumens Large

  5. Notes on Forest and Ornamental Trees on the Grounds of the Agricultural and Mechanical College of Texas. 

    E-Print Network [OSTI]

    Ness, H. (Helge)

    1908-01-01

    , the tree is less vigorous, stunting from such severe prlin- ing will ensue at once. Heading up of trees should be done gradually as in the forest, where it is done by the gradual shading of the lower limbs. If any lower branch should grow too fast, so... AGRICULTURAL EXPERIMENT STATIONS. BULLETIN NO. 105. JUNE, 1908. NOTES ON FOREST AND ORNAMENTAL TREES ON THE GROUN1)S OF THE RAL AND MECHANICAL CO LLEGE OF TTE H. NESS, ASSISTANT HORTLCULTURIST. POSTOFFICE COLLEGE STA'PLON, BRAZOS COUXTY, TEXAS...

  6. Math. Nachr. 279, No. 8, 891 910 (2006) / DOI 10.1002/mana.200310401 A characterization of generalized poles of generalized Nevanlinna

    E-Print Network [OSTI]

    Luger, Annemarie

    2006-01-01

    of generalized poles of generalized Nevanlinna functions Annemarie Luger1 1 Institut f¨ur Analysis und Scientific, generalized poles, pole cancellation functions MSC (2000) 30D50, 30E99, 47B50 Generalized poles. In this paper those generalized poles that are not of positive type and their degrees of non

  7. Test probe for surface mounted leadless chip carrier

    DOE Patents [OSTI]

    Meyer, K.L.; Topolewski, J.

    1987-10-02

    A test probe for a surface mounted leadless chip carrier is disclosed. The probe includes specially designed connector pins which allow size reductions in the probe. A thermoplastic housing provides spring action to ensure good mechanical and electrical contact between the pins and the contact strips of a leadless chip carrier. Other features include flexible wires molded into the housing and two different types of pins alternately placed in the housing. These features allow fabrication of a smaller and simpler test probe. 1 fig.

  8. Spring Mount, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-Enhancing CapacityVectren) Jump to:Spill Prevention andWell LogMount, Pennsylvania:

  9. Mount Airy, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformation MontanaOhio:Hill,Morrisville,Mount Airy, Maryland: Energy

  10. Mount Calm, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformation MontanaOhio:Hill,Morrisville,Mount Airy,Calm, Texas:

  11. Mount Carmel, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformation MontanaOhio:Hill,Morrisville,Mount Airy,Calm,

  12. Mount Chase, Maine: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformation MontanaOhio:Hill,Morrisville,Mount Airy,Calm,Chase,

  13. Mount Healthy, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformation MontanaOhio:Hill,Morrisville,MountHealthy, Ohio: Energy

  14. Mount Hood Village, Oregon: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformation MontanaOhio:Hill,Morrisville,MountHealthy, Ohio:Hood

  15. Mount Hope, Kansas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformation MontanaOhio:Hill,Morrisville,MountHealthy, Ohio:HoodHope,

  16. Mount Ivy, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformation MontanaOhio:Hill,Morrisville,MountHealthy,Ivy, New York:

  17. Mount Kisco, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformation MontanaOhio:Hill,Morrisville,MountHealthy,Ivy, New

  18. Mount Morris, Michigan: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformation MontanaOhio:Hill,Morrisville,MountHealthy,Ivy,Michigan:

  19. NedPower Mount Storm Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceII Jump to: navigation,National Marine FisheriesPolicyNedPower Mount Storm II

  20. A deep high-resolution optical log of dust, ash, and stratigraphy in South Pole glacial ice

    E-Print Network [OSTI]

    Woschnagg, Kurt

    A deep high-resolution optical log of dust, ash, and stratigraphy in South Pole glacial ice N. E (2005), A deep high-resolution optical log of dust, ash, and stratigraphy in South Pole glacial ice

  1. System and method for reproducibly mounting an optical element

    DOE Patents [OSTI]

    Eisenbies, Stephen; Haney, Steven

    2005-05-31

    The present invention provides a two-piece apparatus for holding and aligning the MEMS deformable mirror. The two-piece apparatus comprises a holding plate for fixedly holding an adaptive optics element in an overall optical system and a base spatially fixed with respect to the optical system and adapted for mounting and containing the holding plate. The invention further relates to a means for configuring the holding plate through adjustments to each of a number of off-set pads touching each of three orthogonal plane surfaces on the base, wherein through the adjustments the orientation of the holding plate, and the adaptive optics element attached thereto, can be aligned with respect to the optical system with six degrees of freedom when aligning the plane surface of the optical element. The mounting system thus described also enables an operator to repeatedly remove and restore the adaptive element in the optical system without the need to realign the system once that element has been aligned.

  2. Electron-beam-induced domain poling in LiNbO3 for two-dimensional nonlinear frequency conversion

    E-Print Network [OSTI]

    Arie, Ady

    Electron-beam-induced domain poling in LiNbO3 for two-dimensional nonlinear frequency conversion to achieve noncollinear second-harmonic generation. The sample was fabricated using an electron-beam indirect electron-beam poling,1 electric-field poling,2 and high-voltage atomic force microscop AFM .3

  3. Integration of one-and two-dimensional motion signals in infants: Evidence from the barber-pole illusion

    E-Print Network [OSTI]

    Dobkins, Karen R.

    Integration of one- and two-dimensional motion signals in infants: Evidence from the barber-pole into a coherent global motion percept by studying the ``barber-pole illusion''; when a one-dimensional moving study, we used barber-pole stimuli to investigate the develop- ment of motion mechanisms that integrate

  4. Least Squares Pole Assignment by Memory-less Output Feedback* Dan-chi Jiang & J. B. Moore

    E-Print Network [OSTI]

    Moore, John Barratt

    Least Squares Pole Assignment by Memory-less Output Feedback* Dan-chi Jiang & J. B. Moore In this paper, a pole assignmentproblem of lineartime invariantcontrol system by memory- less output feedback is posed as a least squares poles assignmentproblem and analysed. The coat functions are appropriately

  5. The Spindle Pole Body Assembly Component Mps3p/Nep98p Functions in Sister Chromatid Cohesion*

    E-Print Network [OSTI]

    Fields, Stan

    The Spindle Pole Body Assembly Component Mps3p/Nep98p Functions in Sister Chromatid Cohesion- sis, several processes must occur early in the cell cycle, including spindle pole duplication, DNA replication, and the establishment of cohesion between nascent sis- ter chromatids. Spindle pole body

  6. Damage Characterization of the IASC-ASCE Structural Health Monitoring Benchmark Structure by Transfer Function Pole Migration

    E-Print Network [OSTI]

    Lynch, Jerome P.

    by Transfer Function Pole Migration J. P. Lynch University of Michigan, Department of Civil and Environmental function characteristic equation roots (poles) upon the complex plane. Using structural response time-history data collected from an instrumented structure, transfer function poles can be estimated using

  7. On-Farm Transport of Ornamental Fish 1 Tina C. Crosby, Jeffrey E. Hill, Carlos V. Martinez, Craig A. Watson, Deborah B. Pouder, and Roy

    E-Print Network [OSTI]

    Watson, Craig A.

    FA-119 On-Farm Transport of Ornamental Fish 1 Tina C. Crosby, Jeffrey E. Hill, Carlos V. Martinez and transport of fish will affect survival and overall quality of the fish (see UF IFAS Circular 919 Stress-It's Role in Fish Disease). Fish should be moved quickly and efficiently to minimize stress, the risk

  8. Poles as the only true resonant-state signals extracted from a worldwide collection of partial-wave amplitudes using only one, well controlled pole-extraction method

    SciTech Connect (OSTI)

    Hadzimehmedovic, M.; Osmanovic, H.; Stahov, J.; Ceci, S.; Svarc, A.

    2011-09-15

    Each and every energy-dependent partial-wave analysis is parametrizing the pole positions in a procedure defined by the way the continuous energy dependence is implemented. These pole positions are, henceforth, inherently model dependent. To reduce this model dependence, we use only one, coupled-channel, unitary, fully analytic method based on the isobar approximation to extract the pole positions from each available member of the worldwide collection of partial-wave amplitudes, which are understood as nothing more but a good energy-dependent representation of genuine experimental numbers assembled in a form of partial-wave data. In that way, the model dependence related to the different assumptions on the analytic form of the partial-wave amplitudes is avoided, and the true confidence limit for the existence of a particular resonant state, at least in one model, is established. The way the method works and first results are demonstrated for the S{sub 11} partial wave.

  9. The Fly's Eye project: sidereal tracking on a hexapod mount

    E-Print Network [OSTI]

    Vida, Krisztián; Mészáros, László; Csépány, Gergely; Jaskó, Attila; Mez?, György; Oláh, Katalin

    2014-01-01

    The driving objective of the Fly's Eye Project is a high resolution, high coverage time-domain survey in multiple optical passbands: our goal is to cover the entire visible sky above the 30 deg horizontal altitude with a cadence of 3 min. Imaging is intended to perform with 19 wide-field cameras mounted on a hexapod platform. The essence of the hexapod allows us to build an instrument that does not require any kind of precise alignment and, in addition, the similar mechanics can be involved independently from the geographical location of the device. Here we summarize our early results with a single camera, focusing on the sidereal tracking as it is performed with the hexapod built by our group.

  10. Regenerative braking device with rotationally mounted energy storage means

    DOE Patents [OSTI]

    Hoppie, Lyle O. (Birmingham, MI)

    1982-03-16

    A regenerative braking device for an automotive vehicle includes an energy storage assembly (12) having a plurality of rubber rollers (26, 28) mounted for rotation between an input shaft (30) and an output shaft (32), clutches (50, 56) and brakes (52, 58) associated with each shaft, and a continuously variable transmission (22) connectable to a vehicle drivetrain and to the input and output shafts by the respective clutches. In a second embodiment the clutches and brakes are dispensed with and the variable ratio transmission is connected directly across the input and output shafts. In both embodiments the rubber rollers are torsionally stressed to accumulate energy from the vehicle when the input shaft rotates faster or relative to the output shaft and are torsionally relaxed to deliver energy to the vehicle when the output shaft rotates faster or relative to the input shaft.

  11. Direct mounted photovoltaic device with improved adhesion and method thereof

    DOE Patents [OSTI]

    Boven, Michelle L; Keenihan, James R; Lickly, Stan; Brown, Jr., Claude; Cleereman, Robert J; Plum, Timothy C

    2014-12-23

    The present invention is premised upon a photovoltaic device suitable for directly mounting on a structure. The device includes an active portion including a photovoltaic cell assembly having a top surface portion that allows transmission of light energy to a photoactive portion of the photovoltaic device for conversion into electrical energy and a bottom surface having a bottom bonding zone; and an inactive portion immediately adjacent to and connected to the active portion, the inactive portion having a region for receiving a fastener to connect the device to the structure and having on a top surface, a top bonding zone; wherein one of the top and bottom bonding zones comprises a first bonding element and the other comprises a second bonding element, the second bonding element designed to interact with the first bonding element on a vertically overlapped adjacent photovoltaic device to bond the device to such adjacent device or to the structure.

  12. Flush-mounted probe diagnostics for argon glow discharge plasma

    SciTech Connect (OSTI)

    Xu, Liang Cao, Jinxiang; Liu, Yu; Wang, Jian; Du, Yinchang; Zheng, Zhe; Zhang, Xiao; Wang, Pi; Zhang, Jin; Li, Xiao; Qin, Yongqiang; Zhao, Liang

    2014-09-15

    A comparison is made between plasma parameters measured by a flush-mounted probe (FP) and a cylindrical probe (CP) in argon glow discharge plasma. Parameters compared include the space potential, the plasma density, and the effective electron temperature. It is found that the ion density determined by the FP agrees well with the electron density determined by the CP in the quasi-neutral plasma to better than 10%. Moreover, the space potential and effective electron temperature calculated from electron energy distribution function measured by the FP is consistent with that measured by the CP over the operated discharge current and pressure ranges. These results present the FP can be used as a reliable diagnostic tool in the stable laboratory plasma and also be anticipated to be applied in other complicated plasmas, such as tokamaks, the region of boundary-layer, and so on.

  13. AUTOMATIC RECOGNITION OF ENVIRONMENTAL SOUND EVENTS USING ALL-POLE GROUP DELAY FEATURES

    E-Print Network [OSTI]

    Virtanen, Tuomas

    Diment, Emre Cakir, Toni Heittola, Tuomas Virtanen Department of Signal Processing, Tampere University of Technology, Tampere, Finland ABSTRACT A feature based on the group delay function from all-pole mod- els

  14. Stabilizing a Vehicle near Rollover: An Analogy to Cart-Pole

    E-Print Network [OSTI]

    Peters, Steven Conrad

    An analogy between the dynamics of a cart-pole system and vehicle rollover dynamics is used to derive a controller for tipping up and stabilizing a planar model of a passenger vehicle near rollover by controlling lateral ...

  15. Design, Modeling and Testing of the Askaryan Radio Array South Pole Autonomous Renewable Power Stations

    E-Print Network [OSTI]

    Besson, D Z; Ratzlaff, K; Young, R

    2014-01-01

    We describe the design, construction and operation of the Askaryan Radio Array (ARA) Autonomous Renewable Power Stations, initially installed at the South Pole in December, 2010 with the goal of providing an independently operating 100 W power source capable of year-round operation in extreme environments. In addition to particle astrophysics applications at the South Pole, such a station can easily be, and has since been, extended to operation elsewhere, as described herein.

  16. Pattern of shallow ground water flow at Mount Princeton Hot Springs...

    Open Energy Info (EERE)

    Pattern of shallow ground water flow at Mount Princeton Hot Springs, Colorado, using geoelectrical methods Jump to: navigation, search OpenEI Reference LibraryAdd to library...

  17. Two-Stage Robotic Crystal Mounting of Protein Crystals for X-Ray Data Collection

    E-Print Network [OSTI]

    Georgiev, Atanas

    Beamline Mounting Freezing Fig. 1. A simplified crystallography pipeline. The top row shows a basic outline it into a cryoprotecting liquid, cryogenically fre

  18. Registration of an on-axis see-through head-mounted display and camera system

    E-Print Network [OSTI]

    Peli, Eli

    Registration of an on-axis see-through head- mounted display and camera system Gang Luo Harvard Abstract. An optical see-through head-mounted display (HMD) system integrating a miniature camera and a low registration error across a wide range of depth. In reality, a small camera-eye misalignment may

  19. Mime: Compact, Low-Power 3D Gesture Sensing for Interaction with Head-Mounted Displays

    E-Print Network [OSTI]

    Goyal, Vivek K

    Mime: Compact, Low-Power 3D Gesture Sensing for Interaction with Head-Mounted Displays Andrea Colac of Technology Figure 1: Mime is a compact, low power sensor for 3D gestural control of head mounted displays, a compact, low-power 3D sensor for unen- cumbered free-form, single-handed gestural interaction with head

  20. The 19352003 Air Temperature Record from the Summit of Mount Washington, New Hampshire

    E-Print Network [OSTI]

    Pierce, Jeffrey

    The 1935­2003 Air Temperature Record from the Summit of Mount Washington, New Hampshire ANDREA N. GRANT* Mount Washington Observatory, North Conway, New Hampshire ALEXANDER A. P. PSZENNY AND EMILY V for the Study of Earth, Oceans, and Space, University of New Hampshire, Durham, New Hampshire (Manuscript

  1. dc electric field tunable bulk acoustic wave solidly mounted resonator using SrTiO3

    E-Print Network [OSTI]

    York, Robert A.

    dc electric field tunable bulk acoustic wave solidly mounted resonator using SrTiO3 G. N. SaddikTiO3 solidly mounted bulk acoustic wave resonator has been designed, fabricated, and tested of Physics. DOI: 10.1063/1.2759464 Thin film bulk acoustic wave resonators FBARs have been in use by research

  2. A Study of Mounting Methods for Tactors Using an Elastic Polymer Haruo Noma*

    E-Print Network [OSTI]

    Lindeman, Robert W.

    utilizing a piezoelectric film sensor that monitors mechanical conditions of vibration and using a feedback the vibration of the tactor deeply depends on this inconstant mechanical condition of mounting. We, therefore the consistency of the vibration. Here, we propose a new robust mounting method for a traditional tactor using

  3. Environmental impacts of large-scale grid-connected ground-mounted PV installations

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Environmental impacts of large-scale grid-connected ground-mounted PV installations Antoine Beylota-scale ground-mounted PV installations by considering a life-cycle approach. The methodology is based. Mobile PV installations with dual-axis trackers show the largest impact potential on ecosystem quality

  4. Precise relocation of earthquakes following the 15 June 1991 eruption of Mount Pinatubo (Philippines)

    E-Print Network [OSTI]

    Rowe, Charlotte

    (Philippines) Jean Battaglia,1 Clifford H. Thurber,1 Jean-Luc Got,2 Charlotte A. Rowe,1,3 and Randall A. White4 June 1991 climactic eruption of Mount Pinatubo (Philippines) was followed by intense seismicity relocation of earthquakes following the 15 June 1991 eruption of Mount Pinatubo (Philippines), J. Geophys

  5. Satellite and radar analysis of the volcanic-cumulonimbi at Mount Pinatubo, Philippines, 1991

    E-Print Network [OSTI]

    Daniel, Rosenfeld

    Satellite and radar analysis of the volcanic-cumulonimbi at Mount Pinatubo, Philippines, 1991, Philippines. The observed phenomena included deep convection resulting from (1) lower level eruptions, (2 and radar analysis of the volcanic-cumulonimbi at Mount Pinatubo, Philippines, 1991, J. Geophys. Res., 110

  6. Long-term effects of Lupinus lepidus on vegetation dynamics at Mount R. del Moral1,

    E-Print Network [OSTI]

    del Moral, Roger

    (Jumpponen et al. 1998; Jones and del Moral 2005), slack dunes (Berendse et al. 1998), coastal dunes (Olff et-1 Long-term effects of Lupinus lepidus on vegetation dynamics at Mount St. Helens R. del Moral1 surfaces at Mount St. Helen. We compared vegetation structure in 30 Lupinus colonies in three age classes

  7. 3MTM Air-MateTM Belt Mounted High Efficiency Powered Air Purifying Respirator (PAPR)

    E-Print Network [OSTI]

    Acton, Scott

    3MTM Air-MateTM Belt Mounted High Efficiency Powered Air Purifying Respirator (PAPR) Welcome and thank you for choosing the 3MTM Air-MateTM Belt Mounted High Efficiency Powered Air Purifying Respirator text #12;Double click picture to start video Click button to view video text #12;3MTM Air-MateTM Belt

  8. Yieldably mounted lubricant control assemblies for piston rods

    SciTech Connect (OSTI)

    Meijer, R.J.; Ziph, B. Godett, T.M.

    1986-04-01

    This patent describes an engine having a housing comprising a cylinder within which a piston reciprocates and a piston rod extending from the piston through a bore which extends in the housing from the cylinder to a crankcase and a lubricant control assembly which is disposed within the bore in cooperative arrangement with the piston rod and functions to separate the cylinder from the crankcase while allowing the piston rod to reciprocate axially through a lubricant control portion of the lubricant control assembly which is in forceful contact around the piston rod, the improvement which comprises a compliant housing for mounting the lubricant control assembly on the engine housing. The compliant housing is operatively disposed between the engine housing and the lubricant control portion to allow the lubricant control portion to be radially displaced with respect to the bore and thereby comply with radial displacement of the reciprocating piston rod while maintaining substantially full effectiveness of the lubricant control portion acting on the piston rod. The lubricant control assembly consists of a tubular part, means attaching the tubular part to the compliant housing such that the tubular part can comply with radial displacement of the reciprocating piston rod, and force-applying means acting between the tubular part and the lubricant control portion for urging the lubricant control portion into forceful contact around the reciprocating piston rod.

  9. Thermal cycling tests on surface-mount assemblies

    SciTech Connect (OSTI)

    Jennings, C.W.

    1988-03-01

    The capability of surface-mount (SM) solder joints to withstand various thermal cycle stresses was evaluated through electrical circuit resistance changes of a test pattern and by visual examination for cracks in the solder after exposure to thermal cycling. The joints connected different electrical components, primarily leadless-chip carriers (LCCs), and printed wiring-board (PWB) pads on different laminate substrates. Laminate compositions were epoxy-glass and polyimide-glass with and without copper/Invar/copper (CIC) inner layers, polyimide-quartz, epoxy-Kevlar, and polyimide-Kevlar. The most resistant joints were between small LCCs (24 and 48 pins) and polyimide-glass laminate with CIC inner layers. Processing in joint formation was found to be an important part of joint resistant. Thermal cycling was varied with respect to both time and temperature. A few resistors, capacitors, and inductors showed opens after 500 30-min cycles between -65/degree/C and 125/degree/C. Appreciable moisture contents were measured for laminate materials, especially those of polyimide-Kevlar after equilibration in 100/percent/ relative humidity at room temperature. If not removed or reduced, moisture can cause delamination in vapor-phase soldering. 17 refs, 12 figs.,10 tabs.

  10. Permanent Magnet Machine And Method With Reluctance Poles For High Strength Undiffused Brushless Operation.

    DOE Patents [OSTI]

    Hsu, John S [Oak Ridge, TN

    2005-12-06

    A method and apparatus in which a rotor (11) and a stator (17) define a radial air gap (20) for receiving AC flux and at least one, and preferably two, DC excitation assemblies (23, 24) are positioned at opposite ends of the rotor (20) to define secondary air gaps (21, 22). Portions of PM material (14a, 14b) are provided as boundaries separating the rotor pole portions (12a, 12b) of opposite polarity from other portions of the rotor (11) and from each other to define PM poles (12a, 12b) for conveying the DC flux to or from the primary air gap (20) and for inhibiting flux from leaking from the pole portions prior to reaching the primary air gap (20). The portions of PM material (14a, 14b) are spaced from each other so as to include reluctance poles (15) of ferromagnetic material between the PM poles (12a, 12b) to interact with the AC flux in the primary-air gap (20).

  11. Instrument for analysis of electric motors based on slip-poles component

    DOE Patents [OSTI]

    Haynes, H.D.; Ayers, C.W.; Casada, D.A.

    1996-11-26

    A new instrument is described for monitoring the condition and speed of an operating electric motor from a remote location. The slip-poles component is derived from a motor current signal. The magnitude of the slip-poles component provides the basis for a motor condition monitor, while the frequency of the slip-poles component provides the basis for a motor speed monitor. The result is a simple-to-understand motor health monitor in an easy-to-use package. Straightforward indications of motor speed, motor running current, motor condition (e.g., rotor bar condition) and synthesized motor sound (audible indication of motor condition) are provided. With the device, a relatively untrained worker can diagnose electric motors in the field without requiring the presence of a trained engineer or technician. 4 figs.

  12. Instrument for analysis of electric motors based on slip-poles component

    DOE Patents [OSTI]

    Haynes, Howard D. (Knoxville, TN); Ayers, Curtis W. (Clinton, TN); Casada, Donald A. (Knoxville, TN)

    1996-01-01

    A new instrument for monitoring the condition and speed of an operating electric motor from a remote location. The slip-poles component is derived from a motor current signal. The magnitude of the slip-poles component provides the basis for a motor condition monitor, while the frequency of the slip-poles component provides the basis for a motor speed monitor. The result is a simple-to-understand motor health monitor in an easy-to-use package. Straightforward indications of motor speed, motor running current, motor condition (e.g., rotor bar condition) and synthesized motor sound (audible indication of motor condition) are provided. With the device, a relatively untrained worker can diagnose electric motors in the field without requiring the presence of a trained engineer or technician.

  13. The orbital poles of Milky Way satellite galaxies: a rotationally supported disc-of-satellites

    E-Print Network [OSTI]

    Manuel Metz; Pavel Kroupa; Noam I. Libeskind

    2008-02-26

    Available proper motion measurements of Milky Way (MW) satellite galaxies are used to calculate their orbital poles and projected uncertainties. These are compared to a set of recent cold dark-matter (CDM) simulations, tailored specifically to solve the MW satellite problem. We show that the CDM satellite orbital poles are fully consistent with being drawn from a random distribution, while the MW satellite orbital poles indicate that the disc-of-satellites of the Milky Way is rotationally supported. Furthermore, the bootstrapping analysis of the spatial distribution of theoretical CDM satellites also shows that they are consistent with being randomly drawn. The theoretical CDM satellite population thus shows a significantly different orbital and spatial distribution than the MW satellites, most probably indicating that the majority of the latter are of tidal origin rather than being DM dominated sub-structures. A statistic is presented that can be used to test a possible correlation of satellite galaxy orbits with their spatial distribution.

  14. Pole structure from energy-dependent and single-energy fits to $?N$ elastic scattering data

    E-Print Network [OSTI]

    Alfred Švarc; Mirza Hadžimehmedovi?; Hedim Osmanovi?; Jugoslav Stahov; Ron L. Workman

    2015-01-28

    The pole structure of the current GW/SAID partial-wave analysis of elastic $\\pi N$ scattering and $\\eta N$ production data is studied. Pole positions and residues are extracted from both the energy-dependent and single-energy fits, using two different methods. For the energy-dependent fits, both contour integration and a Laurent+Pietarinen approach are used. In the case of single-energy fits, the Laurent+Pietarinen approach is used. Errors are estimated and the two sets of results are compared to other recent and older fits to data.

  15. Using Software Agents to Supplement Tests Conducted by Human Subjects Hyungna Oh* and Timothy D. Mount**

    E-Print Network [OSTI]

    Tesfatsion, Leigh

    include a micro-grid, a capacity market, long-term contracts, demand-side participation, financial. Mount** Abstract The objective of this paper is to test whether or not software agents can match

  16. An Experimental Evaluation of Duct-Mounted Relative Humidity Sensors: Part 2 – Accuracy Results 

    E-Print Network [OSTI]

    Joshi, S.N.; Pate, M.B.; Nelson, R.M; House, J.H.; Klaasen, C.J.

    2005-01-01

    Reproduced with permission of the copyright owner. Further reproduction prohibited without permission. An Experimental Evaluation of Duct-Mounted Relative Humidity Sensors: Part 2-Accuracy Results Joshi, Shailesh N;House, John M;Pate, Michael B...

  17. Imaging crust and upper mantle beneath Mount Fuji, Japan, by receiver functions

    E-Print Network [OSTI]

    Aoki, Yosuke

    , resulting in little knowledge about the seismic structure there. To gain more insight into the magma with magmatic differentiation is suppressed. Fujii [2007] concluded that the magma reservoir beneath Mount Fuji

  18. Design and development of an automated pinning machine for the surface mount electronics industry

    E-Print Network [OSTI]

    Cook, Daniel J., M. Eng. (Daniel James). Massachusetts Institute of Technology

    2012-01-01

    This thesis describes the development of a concept for a pinning process and the associated machinery to handle odd-form pins specific to a company in the surface mount electronics industry. The developed pinning machine ...

  19. Cleaning process development and optimization in the surface mount assembly line of power modules

    E-Print Network [OSTI]

    Mukherjee, Ishan

    2011-01-01

    The cleaning process in the surface mount assembly line of power modules had been found to insufficiently remove solder flux residue from printed circuit board (PCB) assemblies after the process of reflow soldering. This ...

  20. A method of mounting multiple otoliths for beam-based microchemical analyses

    E-Print Network [OSTI]

    Donohoe, Christopher J.; Zimmerman, Christian E.

    2010-01-01

    is then mounted in thermoplastic resin on the opposite, C.a small amount of thermoplastic resin (e.g. , Crystalbondor sectioned otolith in thermoplastic resin on the free end

  1. A Prehistoric Lahar-Dammed Lake And Eruption Of Mount Pinatubo...

    Open Energy Info (EERE)

    Prehistoric Lahar-Dammed Lake And Eruption Of Mount Pinatubo Described In A Philippine Aborigine Legend Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal...

  2. Near-Surface imaging of a hydrogeothermal system at Mount Princeton...

    Open Energy Info (EERE)

    Near-Surface imaging of a hydrogeothermal system at Mount Princeton, Colorado using 3D seismic, self-potential, and dc resistivity data Jump to: navigation, search OpenEI Reference...

  3. Modeling a Complex Pole-Zero System in Terms of its Low-Frequency/High-Frequency Cutoffs

    E-Print Network [OSTI]

    King, Roger

    Modeling a Complex Pole-Zero System in Terms of its Low-Frequency/High-Frequency Cutoffs Introduction Even a simple amplifier circuit will tend to have multiple poles and zeros in its high-frequency will alter a signal can be gotten from its high-frequency and low-frequency cutoffs. High-Frequency Response

  4. POLE EXPANSION FOR SOLVING A TYPE OF PARAMETRIZED LINEAR SYSTEMS IN ELECTRONIC STRUCTURE

    E-Print Network [OSTI]

    Ying, Lexing

    POLE EXPANSION FOR SOLVING A TYPE OF PARAMETRIZED LINEAR SYSTEMS IN ELECTRONIC STRUCTURE, parametrized linear systems, electronic structure calculation AMS subject classifications. 65F30,65D30,65Z05 1 linear systems. Under certain assumptions on the parametrization, solutions to the linear systems for all

  5. Active vibration control of a fluid/plate system using a pole placement controller

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Active vibration control of a fluid/plate system using a pole placement controller Bogdan Robu reduction of the structural vibrations induced by the sloshing of large masses of fuel inside a partly full, published in "International Journal of Control 85, 6 (2012) 684-694" #12;Keywords Flexible system, fluid

  6. Generation of polarization-entangled photons using type-II doubly periodically poled lithium niobate waveguides

    E-Print Network [OSTI]

    Boyer, Edmond

    Generation of polarization-entangled photons using type-II doubly periodically poled lithium the issue of the generation of non-degenerate cross-polarization-entangled photon pairs using type-conversion processes, namely ordinary pump photon down- conversion to either extraordinary signal and ordinary idler

  7. Thursday, March 15, 2007 POSTER SESSION II: MOON: SOILS, POLES, AND VOLATILES

    E-Print Network [OSTI]

    Rathbun, Julie A.

    Thursday, March 15, 2007 POSTER SESSION II: MOON: SOILS, POLES, AND VOLATILES 6:30 p.m. Fitness Center Schultz R. A. Siddharthan R. Strength of Lunar Soil Using the Cam Cap Approach [#1127] We use a standard Cam Cap approach to model the strength of returned Apollo 12 lunar soil. Cohesion, friction

  8. The Efficiency of Mollies, Poecilia mexicana, as Live Bait for Pole-and-Line

    E-Print Network [OSTI]

    a modem well equipped west coast live- bait vessel, J-Ann (Vergne et aI., 1978). In Hawaii, other concerning cultured baitfish spe- cies called for further field tests and for evaluation of species suitability for pole-and-line tuna fishing. This study tested the desirability of the cultured mollie

  9. Interaction between Poly(ADP-ribose) and NuMA Contributes to Mitotic Spindle Pole Assembly

    E-Print Network [OSTI]

    Coughlin, M.

    Poly(ADP-ribose) (pADPr), made by PARP-5a/tankyrase-1, localizes to the poles of mitotic spindles and is required for bipolar spindle assembly, but its molecular function in the spindle is poorly understood. To investigate ...

  10. Biological control of Cl/Br and low sulfate concentration in a 3.5-Gyr-old seawater from North Pole, Western Australia

    E-Print Network [OSTI]

    Rey, Patrice F.

    Biological control of Cl/Br and low sulfate concentration in a 3.5-Gyr-old seawater from North Pole hydrothermal alteration of the 3.49 Ga Dresser Formation, North Pole Dome, Western Australia. Texturally to be the cause of Cl/Br fractionation between hydrothermal fluids and the bNorth Pole seawaterQ end-member. We

  11. IEEE MICROWAVE AND GUIDED WAVE LETIERS, VOL. 2, NO. 2, FEBRUARY 1992 49 Matrix Singular Value Decomposition for Pole-Free

    E-Print Network [OSTI]

    Bornemann, Jens

    Decomposition for Pole-Free Solutions of Homogeneous Matrix Equations as Applied to Numerical Modeling Methods to poles and steep gradients in the determinant function are eliminated. The proposed technique example of a conductor-backed slotline MMIC structure illustrates the advautage of the pole

  12. GEOPHYSICAL RESEARCHLETTERS, VOL. 26, NO. 9, PAGES I 187-1190,MAY 1, 1999 Illumination conditions at the lunar south pole

    E-Print Network [OSTI]

    Spudis, Paul D.

    conditions at the lunar south pole D. Ben J. Bussey ESA/ESTEC, Noordwijk, The Netherlands Paul D. Spudis shadowedregions at the lunar poles. Clementine, by providing the first con- tiguouscoverageof the Moon, hasenabledthe productionof an illumination map of the south pole. This map showsthe extent of the areas

  13. Assessment of surface air temperature over the Arctic Ocean in reanalysis and IPCC AR4 model simulations with IABP/POLES

    E-Print Network [OSTI]

    Hu, Yongyun

    simulations with IABP/POLES observations Jiping Liu,1 Zhanhai Zhang,2 Yongyun Hu,3 Liqi Chen,4 Yongjiu Dai,5 Surface (IABP/POLES) observations for the period 1979­ 1999. The reanalyses, including the National Forecast 40-year Reanalysis (ERA40), show encouraging agreement with the IABP/POLES observations, although

  14. Right Renal Vein Aplasia Associated With Diverted Renal Venous Drainage Through Lower Pole

    SciTech Connect (OSTI)

    Bozlar, Ugur, E-mail: ubozlar@yahoo.co [Gulhane Military Medical School, Assistant Professor, Department of Radiology (Turkey); Ugurel, Mehmet Sahin [Gulhane Military Medical School, Associate Professor, Department of Radiology (Turkey); Bedir, Selahattin [Gulhane Military Medical School, Assistant Professor, Department of Urology (Turkey); Ors, Fatih [Gulhane Military Medical School, Assistant Professor, Department of Radiology (Turkey); Coskun, Unsal [Gulhane Military Medical Academy, Turkish Armed Forces Rehabilitation Center, Division of Radiology (Turkey); Aydur, Emin [Gulhane Military Medical School, Assistant Professor, Department of Urology (Turkey)

    2008-07-15

    We report a unique anomalous renal venous drainage on a 25-year-old man who had congenital absence of the right renal vein and an aberrant venous drainage through the lower pole of the kidney into the inferior vena cava. To our knowledge, this anomaly has not been previously reported in the peer-reviewed literature. State-of-the-art imaging findings are presented.

  15. Measurement of sound speed vs. depth in South Pole ice: pressure waves and shear waves

    SciTech Connect (OSTI)

    IceCube Collaboration; Klein, Spencer

    2009-06-04

    We have measured the speed of both pressure waves and shear waves as a function of depth between 80 and 500 m depth in South Pole ice with better than 1% precision. The measurements were made using the South Pole Acoustic Test Setup (SPATS), an array of transmitters and sensors deployed in the ice at the South Pole in order to measure the acoustic properties relevant to acoustic detection of astrophysical neutrinos. The transmitters and sensors use piezoceramics operating at {approx}5-25 kHz. Between 200 m and 500 m depth, the measured profile is consistent with zero variation of the sound speed with depth, resulting in zero refraction, for both pressure and shear waves. We also performed a complementary study featuring an explosive signal propagating vertically from 50 to 2250 m depth, from which we determined a value for the pressure wave speed consistent with that determined for shallower depths, higher frequencies, and horizontal propagation with the SPATS sensors. The sound speed profile presented here can be used to achieve good acoustic source position and emission time reconstruction in general, and neutrino direction and energy reconstruction in particular. The reconstructed quantities could also help separate neutrino signals from background.

  16. Integrated crystal mounting and alignment system for high-throughput biological crystallography

    DOE Patents [OSTI]

    Nordmeyer, Robert A.; Snell, Gyorgy P.; Cornell, Earl W.; Kolbe, William; Yegian, Derek; Earnest, Thomas N.; Jaklevic, Joseph M.; Cork, Carl W.; Santarsiero, Bernard D.; Stevens, Raymond C.

    2005-07-19

    A method and apparatus for the transportation, remote and unattended mounting, and visual alignment and monitoring of protein crystals for synchrotron generated x-ray diffraction analysis. The protein samples are maintained at liquid nitrogen temperatures at all times: during shipment, before mounting, mounting, alignment, data acquisition and following removal. The samples must additionally be stably aligned to within a few microns at a point in space. The ability to accurately perform these tasks remotely and automatically leads to a significant increase in sample throughput and reliability for high-volume protein characterization efforts. Since the protein samples are placed in a shipping-compatible layered stack of sample cassettes each holding many samples, a large number of samples can be shipped in a single cryogenic shipping container.

  17. Integrated crystal mounting and alignment system for high-throughput biological crystallography

    DOE Patents [OSTI]

    Nordmeyer, Robert A. (San Leandro, CA); Snell, Gyorgy P. (Richmond, CA); Cornell, Earl W. (Antioch, CA); Kolbe, William F. (Moraga, CA); Yegian, Derek T. (Oakland, CA); Earnest, Thomas N. (Berkeley, CA); Jaklevich, Joseph M. (Lafayette, CA); Cork, Carl W. (Walnut Creek, CA); Santarsiero, Bernard D. (Chicago, IL); Stevens, Raymond C. (La Jolla, CA)

    2007-09-25

    A method and apparatus for the transportation, remote and unattended mounting, and visual alignment and monitoring of protein crystals for synchrotron generated x-ray diffraction analysis. The protein samples are maintained at liquid nitrogen temperatures at all times: during shipment, before mounting, mounting, alignment, data acquisition and following removal. The samples must additionally be stably aligned to within a few microns at a point in space. The ability to accurately perform these tasks remotely and automatically leads to a significant increase in sample throughput and reliability for high-volume protein characterization efforts. Since the protein samples are placed in a shipping-compatible layered stack of sample cassettes each holding many samples, a large number of samples can be shipped in a single cryogenic shipping container.

  18. Minutes of the Final Design Review of the M4 mount designed by ERIA for the 30-m telescope,

    E-Print Network [OSTI]

    Leclercq, Samuel

    to this M3-M4 project: http://www.iram.fr/~leclercq/30m_cabin_mirrors_upgrade/M3-M4_7amFOV.html 8 main, the motor is on the rotating tripod, and it looks like the bearing on the mount rotate also; if this is the case the mount can't rotate. SL + BL: No, the bearing should be attached to the fixed part of the mount

  19. High-resolution local gravity model of the south pole of the Moon from GRAIL extended mission data

    E-Print Network [OSTI]

    Goossens, Sander

    We estimated a high-resolution local gravity field model over the south pole of the Moon using data from the Gravity Recovery and Interior Laboratory's extended mission. Our solution consists of adjustments with respect ...

  20. Generation of continuous-wave broadband Einstein-Podolsky-Rosen beams using periodically-poled lithium niobate waveguides

    E-Print Network [OSTI]

    Ken-ichiroh Yoshino; Takao Aoki; Akira Furusawa

    2006-09-15

    Continuous-wave light beams with broadband Einstein-Podolsky-Rosen correlation (Einstein-Podolsky-Rosen beams) are created with two independent squeezed vacua generated by two periodically-poled lithium niobate waveguides and a half beam splitter.

  1. Exploration of versatile clamping mechanism and brace system for table attachment to lamp posts and poles in urban settings

    E-Print Network [OSTI]

    Macomber, Bryan A

    2012-01-01

    The goal of this thesis is to explore potential designs for a table that attaches to poles and street signs outside food trucks. A convenient placement of tables could greatly facilitate and improve the eating experience ...

  2. Discrete-Time Poles and Dynamics of Discontinuous Mode Boost and Buck Converters Under Various Control Schemes

    E-Print Network [OSTI]

    Chung-Chieh Fang

    2012-11-19

    Nonlinear systems, such as switching DC-DC boost or buck converters, have rich dynamics. A simple one-dimensional discrete-time model is used to analyze the boost or buck converter in discontinuous conduction mode. Seven different control schemes (open-loop power stage, voltage mode control, current mode control, constant power load, constant current load, constant-on-time control, and boundary conduction mode) are analyzed systematically. The linearized dynamics is obtained simply by taking partial derivatives with respect to dynamic variables. In the discrete-time model, there is only a single pole and no zero. The single closed-loop pole is a linear combination of three terms: the open-loop pole, a term due to the control scheme, and a term due to the non-resistive load. Even with a single pole, the phase response of the discrete-time model can go beyond -90 degrees as in the two-pole average models. In the boost converter with a resistive load under current mode control, adding the compensating ramp has no effect on the pole location. Increasing the ramp slope decreases the DC gain of control-to-output transfer function and increases the audio-susceptibility. Similar analysis is applied to the buck converter with a non-resistive load or variable switching frequency. The derived dynamics agrees closely with the exact switching model and the past research results.

  3. Ornamentals for Southwest Texas. 

    E-Print Network [OSTI]

    Mortensen, Ernest

    1947-01-01

    and flowering shrubs, vines, bulbs, herbaceous flowers and lawn blanco, mesquite, non-fruiting mu1... in this section. Other useful anti ttractive trees are sycamore, palo blanco, Arizona walnut and cedar lm. For quick results and dense shade, the Texas umbrella is out- tanding, but. the berries are very unsightly in the fall and minter and will probably have...

  4. Propagation of Ornamental Plants. 

    E-Print Network [OSTI]

    DeWerth, A. F.

    1955-01-01

    '~ihtenecl with a fine mist spray of water, since an important factor in rooting cuttings is to keep the cuttings moist. There are many advantages in the use of mist by the home gardener. A cutting continues to lose water by transpiration after... it is removed from the parent plant. It is impossible for the cuttings to take up sufficient water to replace that lost by rapid transpiration until new roots are formed. The mist system prevents ex- cessive loss of water by the cutting. Maintain- ing...

  5. Minimum Movement Matters: Impact of Robot-Mounted Cameras on Social Telepresence

    E-Print Network [OSTI]

    Nakanishi, Hideyuki

    Minimum Movement Matters: Impact of Robot-Mounted Cameras on Social Telepresence Hideyuki Nakanishi-backward movement of the camera significantly contributed to social telepresence, while rotation did not. We also commercially available. This paper shows that movement of these robots enhances distant people's presence

  6. Strontium Titanate DC Electric Field Switchable and Tunable Bulk Acoustic Wave Solidly Mounted Resonator

    E-Print Network [OSTI]

    York, Robert A.

    Strontium Titanate DC Electric Field Switchable and Tunable Bulk Acoustic Wave Solidly Mounted.3 0/0. Index Terms - Acoustic resonators, bulk acoustic wave devices, delay filters, ferroelectric,4] that can be exploited to realize voltage-switchable bulk-acoustic wave (BAW) devices for RF applications [5

  7. Aalborg Universitet Determination of the High Frequency Inductance Profile of Surface Mounted

    E-Print Network [OSTI]

    Rasmussen, Peter Omand

    Permanent Magnet Synchronous Motors Lu, Kaiyuan; Rasmussen, Peter Omand; Ritchie, Andrew Ewen Published in: Proceedings of the 11th International Conference on Electrical Machines and Systems ICEMS '08 Publication date). Determination of the High Frequency Inductance Profile of Surface Mounted Permanent Magnet Synchronous Motors

  8. New Loops! MiTeGen* 50MicroMountsTM consist of a thin microfabricated

    E-Print Network [OSTI]

    Meagher, Mary

    New Loops! MiTeGen* 50µMicroMountsTM consist of a thin microfabricated polyimide film attached to a solid non-magnetic stainless steel pin. The film is polyimide, which is used in Kapton® tape and is employed for X- ray transparent windows on X-ray beam lines. The film is curved by wrapping polyimide film

  9. Seismic reflection imaging of the Mount Rose fault zone, Reno, Nevada

    E-Print Network [OSTI]

    Barrash, Warren

    . Lateral variations and offsets in late Quaternary stratigraphy in South Reno identified on four seismicSeismic reflection imaging of the Mount Rose fault zone, Reno, Nevada Project Award Number: # G09AP expressed or implied, of the U.S. Government. #12;2 Abstract Five new high-resolution seismic reflection

  10. Drag Reduction Control for Flow over a Hump with Surface-Mounted Thermoacoustic Actuator

    E-Print Network [OSTI]

    Drag Reduction Control for Flow over a Hump with Surface-Mounted Thermoacoustic Actuator Chi-An Yeh of thermoacoustic actuators that locally introduce high-intensity acoustic waves for active flow control is examined-based thermoacoustic actuators, high-frequency actuation around Helmholtz number of 3.0 is considered. We observe

  11. REDUCING THE RISK FROM VOLCANO HAZARDS Lahars of Mount Pinatubo, Philippines

    E-Print Network [OSTI]

    REDUCING THE RISK FROM VOLCANO HAZARDS O Lahars of Mount Pinatubo, Philippines n June 15, 1991 Pinatubo on the island of Luzon in the Philippines, the volcano had been dormant for 500 years, allowing in the Philippines (Clark Air Base), were built on the broad gentle slopes surrounding the volcano. When Pinatubo

  12. Apparatus and method for mounting photovoltaic power generating systems on buildings

    DOE Patents [OSTI]

    Russell, Miles Clayton (Lincoln, MA)

    2008-10-14

    Rectangular PV modules (6) are mounted on a building roof (4) by mounting stands that are distributed in rows and columns. Each stand comprises a base plate (10) that rests on the building roof (4) and first and second brackets (12, 14) of different height attached to opposite ends of the base plate (10). Each bracket (12, 14) has dual members for supporting two different PV modules (6), and each PV module (6) has a mounting pin (84) adjacent to each of its four corners. Each module (6) is supported by attachment of two of its mounting pins (84) to different first brackets (12), whereby the modules (6) and their supporting stands are able to resist uplift forces resulting from high velocity winds without the base plates (10) being physically attached to the supporting roof structure (4). Preferably the second brackets (14) have a telescoping construction that permits their effective height to vary from less than to substantially the same as that of the first brackets (12).

  13. Cylindrical Pellet Pose Estimation in Clutter using a Single Robot Mounted Camera

    E-Print Network [OSTI]

    Roy, Sumantra Dutta

    Cylindrical Pellet Pose Estimation in Clutter using a Single Robot Mounted Camera Punit Tiwan estimation of cylindrical pellet using a single camera-in-hand configuration of a robot is discussed in this paper. Approaches to estimate pose in both isolated and an occluded environment is discussed. The pellet

  14. A Rollator-Mounted Wayfinding System for the Elderly: Proof-of-Concept Design

    E-Print Network [OSTI]

    Kulyukin, Vladimir

    A Rollator-Mounted Wayfinding System for the Elderly: Proof-of-Concept Design and Preliminary to this research venue by describing the proof-of-concept design and preliminary technical evaluation of i efforts, iWalker emphasizes a smart world (SW) perspective. A SW is a physical space equipped

  15. Mount Mta sca, San Giacomo Filippo, north Italy, overlooks the road leading to the Spluga

    E-Print Network [OSTI]

    Alippi, Cesare

    Mount Móta séca, San Giacomo Filippo, north Italy, overlooks the road leading to the Spluga alpine that acquires micro-acoustic emissions associated with the generation of micro-cracks and their coalescing, harvest the required energy with an intelligent MMPT-based mechanism for on photovoltaic cells and react

  16. A Demonstrated Optical Tracker With Scalable Work Area for Head-Mounted Display Systems

    E-Print Network [OSTI]

    Pollefeys, Marc

    A Demonstrated Optical Tracker With Scalable Work Area for Head- Mounted Display Systems Mark Ward Hall University of North Carolina Chapel Hill, NC 27599-3175 Abstract An optoelectronic head of an optoelectronic head-tracking concept developed at the University of North Carolina at Chapel Hill. In the concept

  17. A Polarized Head-Mounted Projective Display and Chunyu Gao2

    E-Print Network [OSTI]

    Hua, Hong

    projection system in [6]. Rolland has been developing an OLED-based (organic light emitting display in a head- mounted projective display (HMPD) due to the fact that light passes through the beamsplitter a custom-designed ultra-light projection system with a 52-degree field of view (FOV) [5, 6]. Hua recently

  18. Mechanical modeling and InSAR measurements of Mount Sedom uplift, Dead Sea basin: Implications for effective

    E-Print Network [OSTI]

    Lyakhovsky, Vladimir

    Mechanical modeling and InSAR measurements of Mount Sedom uplift, Dead Sea basin: Implications of predicted profiles: topography, uplift rate, and shear strain. The present topography of Mount Sedom stage and at the Plio-Pleistocene pre-emergent stage of the Sedom diapir, respectively. The uplift

  19. Minutes of the Final Design Review of the M4 mount designed by ERIA for the 30-m telescope,

    E-Print Network [OSTI]

    Leclercq, Samuel

    from SN): - All the big parts are in aluminum, except the support frame that serves to attach the mount to the horizontal tube of the telescope, which is in steel. All the small parts (screws, bolts, etc.) are also on the circular support that allow to adjust the orientation of the mount around the vertical axis. This hole can

  20. Transmission of a quantum state in a periodically poled nonlinear crystal

    E-Print Network [OSTI]

    Ranjit Singh

    2010-05-03

    Theoretical calculations on transmission of quantum states such as Schr\\"{o}dinger cat (SC) states are considered in a periodically poled nonlinear crystal (PPNC). Combinations of various initial states (SC, coherent (C),and vacuum (V)) of light waves at frequencies $\\omega_{e}$ and $3\\omega_{e}$ at the input of a PPNC are studied. It is shown that the transmission and interference between superposition of macroscopically distinguishable states can be achieved by using a PPNC. Visualization and analyzes of transmission and interference processes are demonstrated with the help of reduced Wigner quasi-probability distribution functions of considered light waves.

  1. Regge trajectory of the f0(500) resonance from a dispersive connection to its pole

    SciTech Connect (OSTI)

    Nebreda, J.; Londergan, J. Timothy; Pelaez, Jose R.; Szczepaniak, Adam P.

    2014-11-01

    We report here our results on how to obtain the Regge trajectory of a resonance from its pole in a scattering process by imposing analytic constraints in the complex angular momentum plane. The method, suited for resonances that dominate an elastic scattering amplitude, has been applied to the ? (770) and the f0(500) resonances. Whereas for the former we obtain a linear Regge trajectory, characteristic of ordinary quark-antiquark states, for the latter we find a non-linear trajectory with a much smaller slope at the resonance mass. This provides a strong indication of the non-ordinary nature of the sigma meson.

  2. Far-ultraviolet Observations of the North Ecliptic Pole with SPEAR

    E-Print Network [OSTI]

    Eric J. Korpela; Jerry Edelstein; Julia Kregenow; Kaori Nishikida; Kyoung-Wook Min; Dae-Hee Lee; Kwangsun Ryu; Wonyong Han; Uk-Won Nam; Jang-Hyun Park

    2006-01-26

    We present SPEAR/FIMS far-ultraviolet observations near the North Ecliptic Pole. This area, at b~30 degrees and with intermediate HI column, seems to be a fairly typical line of sight that is representative of general processes in the diffuse ISM. We detect a surprising number of emission lines of many elements at various ionization states representing gas phases from the warm neutral medium (WNM) to the hot ionized medium (HIM). We also detect fluorescence bands of H2, which may be due to the ubiquitous diffuse H2 previously observed in absorption.

  3. Pole structure and biharmonic fields in conformal QFT in four dimensions

    E-Print Network [OSTI]

    N. M. Nikolov; K. -H. Rehren; I. Todorov

    2007-11-05

    Imposing Huygens' Principle in a 4D Wightman QFT puts strong constraints on its algebraic and analytic structure. These are best understood in terms of ``biharmonic fields'', whose properties reflect the presence of infinitely many conserved tensor currents. In particular, a universal third-order partial differential equation is derived for the most singular parts of connected scalar correlation functions. This PDE gives rise to novel restrictions on the pole structure of higher correlation functions. An example of a six-point function is presented that cannot arise from free fields. This example is exploited to study the locality properties of biharmonic fields.

  4. SPEAR far UV spectral imaging of highly ionized emission from the North Galactic Pole Region

    E-Print Network [OSTI]

    B. Y. Welsh; J. Edelstein; E. Korpela

    2007-06-06

    We present far ultraviolet (FUV: 912 - 1750AA) spectral imaging observations recorded with the SPEAR satellite of the interstellar OVI (1032AA), CIV (1550AA), SiIV (1394AA), SiII* (1533AA) and AlII (1671AA) emission lines originating in a 60 x 30 degree rectangular region lying close to the North Galactic Pole. These data represent the first large area, moderate spatial resolution maps of the distribution of UV spectral-line emission originating the both the highly ionized medium (HIM) and the warm ionized medium (WIM) recorded at high galactic latitudes.

  5. North Pole's Holiday Wish for An Energy Efficient 2012 | Department of

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nAand DOEDepartmentNew JerseyEnergy The city of North Pole, Alaska, is

  6. Deep Extragalactic Surveys around the Ecliptic Poles with AKARI (ASTRO-F)

    E-Print Network [OSTI]

    Hideo Matsuhara; Takehiko Wada; Shuji Matsuura; Takao Nakagawa; Mitsunobu Kawada; Youichi Oyama; Chris P. Pearson; Shinki Oyabu; Toshinobu Takagi; Stephen Serjeant; Glenn J. White; Hitoshi Hanami; Hidenori Watarai; Tsutomu T. Takeuchi; Tadayuki Kodama; Nobuo Arimoto; Sadanori Okamura; Hyung Mok Lee; Soojong Pak; Myung Shin Im; Myung Gyoon Lee; Woojung Kim; Woong Seob Jeong; Koji Imai; Naofumi Fujishiro; Mai Shirahata; Toyoaki Suzuki; Chiaki Ihara; Itsuki Sakon

    2006-05-23

    AKARI (formerly ASTRO-F) is an infrared space telescope designed for an all-sky survey at 10-180 (mu)m, and deep pointed surveys of selected areas at 2-180 (mu)m. The deep pointed surveys with AKARI will significantly advance our understanding of galaxy evolution, the structure formation of the Universe, the nature of the buried AGNs, and the cosmic infrared background. Here we describe the important characteristics of the AKARI mission: the orbit, and the attitude control system, and investigate the optimum survey area based on the updated pre-flight sensitivities of AKARI, taking into account the cirrus confusion noise as well as the surface density of bright stars. The North Ecliptic Pole (NEP) is concluded to be the best area for 2-26 (mu)m deep surveys, while the low-cirrus noise regions around the South Ecliptic Pole (SEP) are worth considering for 50-180 (mu)m pointed surveys to high sensitivities limited by the galaxy confusion noise. Current observational plans of these pointed surveys are described in detail. Comparing these surveys with the deep surveys with the Spitzer Space Telescope, the AKARI deep surveys are particularly unique in respect of their continuous wavelength coverage over the 2-26 (mu)m range in broad-band deep imaging, and their slitless spectroscopy mode over the same wavelength range.

  7. Refined rotational period, pole solution, and shape model for (3200) Phaethon

    SciTech Connect (OSTI)

    Ansdell, Megan; Meech, Karen J.; Kaluna, Heather; Hainaut, Olivier; Buie, Marc W.; Bauer, James; Dundon, Luke

    2014-09-20

    (3200) Phaethon exhibits both comet- and asteroid-like properties, suggesting it could be a rare transitional object such as a dormant comet or previously volatile-rich asteroid. This justifies detailed study of (3200) Phaethon's physical properties as a better understanding of asteroid-comet transition objects can provide insight into minor body evolution. We therefore acquired time series photometry of (3200) Phaethon over 15 nights from 1994 to 2013, primarily using the Tektronix 2048 × 2048 pixel CCD on the University of Hawaii 2.2 m telescope. We utilized light curve inversion to (1) refine (3200) Phaethon's rotational period to P = 3.6032 ± 0.0008 hr; (2) estimate a rotational pole orientation of ? = +85° ± 13° and ? = –20° ± 10°; and (3) derive a shape model. We also used our extensive light curve data set to estimate the slope parameter of (3200) Phaethon's phase curve as G ? 0.06, consistent with C-type asteroids. We discuss how this highly oblique pole orientation with a negative ecliptic latitude supports previous evidence for (3200) Phaethon's origin in the inner main asteroid belt as well as the potential for deeply buried volatiles fueling impulsive yet rare cometary outbursts.

  8. OPTICAL IMAGES AND SOURCE CATALOG OF AKARI NORTH ECLIPTIC POLE WIDE SURVEY FIELD

    SciTech Connect (OSTI)

    Jeon, Yiseul; Im, Myungshin; Lee, Induk [Center for the Exploration of the Origin of the Universe (CEOU), Astronomy Program, Department of Physics and Astronomy, Seoul National University, Shillim-Dong, Kwanak-Gu, Seoul 151-742 (Korea, Republic of); Ibrahimov, Mansur [Ulugh Beg Astronomical Institute, 33 Astronomicheskaya str., Tashkent, 100052 (Uzbekistan); Lee, Hyung Mok; Lee, Myung Gyoon, E-mail: ysjeon@astro.snu.ac.k, E-mail: mim@astro.snu.ac.k [Astronomy Program, FPRD, Department of Physics and Astronomy, Seoul National University, Shillim-Dong, Kwanak-Gu, Seoul 151-742 (Korea, Republic of)

    2010-09-15

    We present the source catalog and the properties of the B-, R-, and I-band images obtained to support the AKARI North Ecliptic Pole Wide (NEP-Wide) survey. The NEP-Wide is an AKARI infrared imaging survey of the north ecliptic pole covering a 5.8 deg{sup 2} area over 2.5-6 {mu}m wavelengths. The optical imaging data were obtained at the Maidanak Observatory in Uzbekistan using the Seoul National University 4k x 4k Camera on the 1.5 m telescope. These images cover 4.9 deg{sup 2} where no deep optical imaging data are available. Our B-, R-, and I-band data reach the depths of {approx}23.4, {approx}23.1, and {approx}22.3 mag (AB) at 5{sigma}, respectively. The source catalog contains 96,460 objects in the R band, and the astrometric accuracy is about 0.''15 at 1{sigma} in each R.A. and decl. direction. These photometric data will be useful for many studies including identification of optical counterparts of the infrared sources detected by AKARI, analysis of their spectral energy distributions from optical through infrared, and the selection of interesting objects to understand the obscured galaxy evolution.

  9. Precession of a Freely Rotating Rigid Body. Inelastic Relaxation in the Vicinity of Poles

    E-Print Network [OSTI]

    Michael Efroimsky

    2001-12-06

    When a solid body is freely rotating at an angular velocity ${\\bf \\Omega}$, the ellipsoid of constant angular momentum, in the space $\\Omega_1, \\Omega_2, \\Omega_3$, has poles corresponding to spinning about the minimal-inertia and maximal-inertia axes. The first pole may be considered stable if we neglect the inner dissipation, but becomes unstable if the dissipation is taken into account. This happens because the bodies dissipate energy when they rotate about any axis different from principal. In the case of an oblate symmetrical body, the angular velocity describes a circular cone about the vector of (conserved) angular momentum. In the course of relaxation, the angle of this cone decreases, so that both the angular velocity and the maximal-inertia axis of the body align along the angular momentum. The generic case of an asymmetric body is far more involved. Even the symmetrical prolate body exhibits a sophisticated behaviour, because an infinitesimally small deviation of the body's shape from a rotational symmetry (i.e., a small difference between the largest and second largest moments of inertia) yields libration: the precession trajectory is not a circle but an ellipse. In this article we show that often the most effective internal dissipation takes place at twice the frequency of the body's precession. Applications to precessing asteroids, cosmic-dust alignment, and rotating satellites are discussed.

  10. Gamow-Jordan Vectors and Non-Reducible Density Operators from Higher Order S-Matrix Poles

    E-Print Network [OSTI]

    A. Bohm; M. Loewe; S. Maxson; P. Patuleanu; C. Puntmann; M. Gadella

    1997-05-07

    In analogy to Gamow vectors that are obtained from first order resonance poles of the S-matrix, one can also define higher order Gamow vectors which are derived from higher order poles of the S-matrix. An S-matrix pole of r-th order at z_R=E_R-i\\Gamma/2 leads to r generalized eigenvectors of order k= 0, 1, ... , r-1, which are also Jordan vectors of degree (k+1) with generalized eigenvalue (E_R-i\\Gamma/2). The Gamow-Jordan vectors are elements of a generalized complex eigenvector expansion, whose form suggests the definition of a state operator (density matrix) for the microphysical decaying state of this higher order pole. This microphysical state is a mixture of non-reducible components. In spite of the fact that the k-th order Gamow-Jordan vectors has the polynomial time-dependence which one always associates with higher order poles, the microphysical state obeys a purely exponential decay law.

  11. Guard Mount 

    E-Print Network [OSTI]

    Unknown

    2011-09-05

    This thesis examines the American Military Assistance Advisory Group (MAAG) sent to French Indochina, from 1950 to 1956, when the United States provided major monetary and material aid to the French in their war against the communist Viet Minh. MAAG...

  12. Carbonyl sulfide and carbon disulfide from the eruptions of Mount St. Helens

    SciTech Connect (OSTI)

    Rasmussen, R.A.; Khalil, M.A.K.; Dalluge, R.W.; Penkett, S.A.; Jones, B.

    1982-01-01

    Ash from the massive 18 May 1980 eruption of Mount St. Helens readily gave off large amounts of carbonyl sulfide and carbon disulfide gases at room temperature. These findings suggest that the sulfur that enhances the Junge sulfate layer in the stratosphere after volcanic eruptions could be carried directly to the upper atmosphere as carbonyl sulfide and carbon disulfide adsorbed on ash particles from major volcanic eruptions.

  13. Optimal current control strategies for surface-mounted permanent-magnet synchronous machine drives

    SciTech Connect (OSTI)

    Chapman, P.L.; Sudhoff, S.D.; Whitcomb, C.A.

    1999-12-01

    The current waveforms for optimal excitation of surface-mounted permanent-magnet synchronous machines are set forth. Four different modes are considered, involving varying degrees of minimization of rms current and torque ripple. The optimized waveforms are markedly different than the traditional sinusoidal or rectangular excitation schemes. Inclusion of cogging torque and arbitrary degree of torque ripple minimization generalize this work over that of previous authors. An experimental drive and a detailed computer simulation verify the proposed control schemes.

  14. Complex extension of potentials and trajectories of poles of the S-matrix element in the complex momentum plane

    E-Print Network [OSTI]

    M. Kawasaki; T. Maehara; M. Yonezawa

    2008-10-30

    Searching for infrastructure of the quantum mechanical system, we study trajectories of the s-wave poles of the S-matrix element with respect to a real phase $\\alpha$ in the complex momentum plane for a complex extension of real potentials by a phase factor $e^{i\\alpha}$. This complex extension relates the pole spectrum of the physical system with a potential to the spectrum of another system with the potential of the same shape but of opposite sign. There appear trajectories with the periodicity of $2\\pi$, $4\\pi$, and $\\infty$. The appearance of non-recurrent behavior of the trajectory for the change of phase $\\Delta \\alpha=2\\pi$ is clearly related with the existence of resonance poles for real repulsive potentials. Dynamical changes of trajectory structure are examined.

  15. Base excitation testing system using spring elements to pivotally mount wind turbine blades

    DOE Patents [OSTI]

    Cotrell, Jason; Hughes, Scott; Butterfield, Sandy; Lambert, Scott

    2013-12-10

    A system (1100) for fatigue testing wind turbine blades (1102) through forced or resonant excitation of the base (1104) of a blade (1102). The system (1100) includes a test stand (1112) and a restoring spring assembly (1120) mounted on the test stand (1112). The restoring spring assembly (1120) includes a primary spring element (1124) that extends outward from the test stand (1112) to a blade mounting plate (1130) configured to receive a base (1104) of blade (1102). During fatigue testing, a supported base (1104) of a blad (1102) may be pivotally mounted to the test stand (1112) via the restoring spring assembly (1120). The system (1100) may include an excitation input assembly (1140) that is interconnected with the blade mouting plate (1130) to selectively apply flapwise, edgewise, and/or pitch excitation forces. The restoring spring assemply (1120) may include at least one tuning spring member (1127) positioned adjacent to the primary spring element (1124) used to tune the spring constant or stiffness of the primary spring element (1124) in one of the excitation directions.

  16. SEQUENCE STRATIGRAPHY AND FACIES ANALYSIS OF THE ROLLINS SANDSTONE MEMBER (MOUNT GARFIELD FORMATION) AND RE-EXAMINATION OF THE CONTACT BETWEEN THE MOUNT GARFIELD AND WILLIAMS FORK FORMATIONS (LATE CRETACEOUS)

    E-Print Network [OSTI]

    Thompson, Jesse David

    2011-08-31

    The Cretaceous Rollins Sandstone Member (Mount Garfield Formation) is the youngest marine sandstone deposited within the Sevier foreland basin in Colorado. The Rollins Sandstone Member is a complicated stratigraphic unit ...

  17. Analytic Representations of Bath Correlation Functions for Ohmic and Superohmic Spectral Densities Using Simple Poles

    E-Print Network [OSTI]

    Gerhard Ritschel; Alexander Eisfeld

    2014-08-19

    We present a scheme to express a bath correlation function (BCF) corresponding to a given spectral density (SD) as a sum of damped harmonic oscillations. Such a representation is needed, for example, in many open quantum system approaches. To this end we introduce a class of fit functions that enables us to model ohmic as well as superohmic behavior. We show that these functions allow for an analytic calculation of the BCF using pole expansions of the temperature dependent hyperbolic cotangent. We demonstrate how to use these functions to fit spectral densities exemplarily for cases encountered in the description of photosynthetic light harvesting complexes. Finally, we compare absorption spectra obtained for different fits with exact spectra and show that it is crucial to take properly into account the behavior at small frequencies when fitting a given SD.

  18. Acoustic noise in deep ice and environmental conditions at the South Pole

    E-Print Network [OSTI]

    Timo Karg; for the IceCube Collaboration

    2008-11-07

    To study the acoustic properties of the Antarctic ice the South Pole Acoustic Test Setup (SPATS) was installed in the upper part of drill holes for the IceCube neutrino observatory. An important parameter for the design of a future acoustic neutrino telescope is the acoustic background noise in the ice and its spatial and temporal variations. We study the absolute noise level depth profile from SPATS data and discuss systematic uncertainties. The measured noise is very stable over one year of data taking, and we estimate the absolute noise level to be < 10 mPa in the frequency range from 10 kHz to 50 kHz at depths below 200 m. This noise level is of the same order of magnitude as observed by ocean based acoustic neutrino detection projects in good weather conditions.

  19. An Experimental Evaluation of Duct-Mounted Relative Humidity Sensors: Part 3 – Repeatability, Hysteresis and Linearity Results 

    E-Print Network [OSTI]

    Joshi, S.N.; Pate, M.B.; Nelson, R.M.; House, J.H.; Klaassen, C.J.

    2005-01-01

    Reproduced with permission of the copyright owner. Further reproduction prohibited without permission. An Experimental Evaluation of Duct-Mounted Relative Humidity Sensors: Part 3-Repeatability, Hyste... Joshi, Shailesh N;House, John M...

  20. Evidence of a Threshold Wind Speed in Tower-mounted Scatterometer Data David W. Draper and David G. Long

    E-Print Network [OSTI]

    Long, David G.

    . Evidence of the threshold wind speed and a hysteresis effect have been observed in airship and wave tank in airship data [2]. YSCAT, an ultra-wideband (2-14 GHz) tower-mounted scat- terometer, provides significant

  1. IEEE TRANSACTIONS ON MAGNETICS, VOL. 45, NO. 12, DECEMBER 2009 5399 Modeling of the Starting Performance of Large Solid-Pole Synchronous

    E-Print Network [OSTI]

    Mi, Chunting "Chris"

    refineries, steel mills, and power plants [1]­[6]. Large solid pole motors are a special category of large virtual windings. Therefore, the two-axis theory can be used for the solid pole synchronous motor. We, starting performance, transformation coefficient, two-axis theory, virtual windings. I. INTRODUCTION LARGE

  2. Electra-optic phenomena in gelatin-based poled polymer Z. Z. Ho, Ray T. Chen, and Robert Shih

    E-Print Network [OSTI]

    Chen, Ray

    Electra-optic phenomena in gelatin-based poled polymer Z. Z. Ho, Ray T. Chen, and Robert Shih lime gel has been constructed and demonstrated. The transmission spectrum of nitrophenol/gelatin shows-linked nature of the gelatin. This result indicates that both passive and active integrated optical devices can

  3. Eddy current probe with foil sensor mounted on flexible probe tip and method of use

    SciTech Connect (OSTI)

    Viertl, John R. M. (Niskayuna, NY); Lee, Martin K. (Niskayuna, NY)

    2001-01-01

    A pair of copper coils are embedded in the foil strip. A first coil of the pair generates an electromagnetic field that induces eddy currents on the surface, and the second coil carries a current influenced by the eddy currents on the surface. The currents in the second coil are analyzed to obtain information on the surface eddy currents. An eddy current probe has a metal housing having a tip that is covered by a flexible conductive foil strip. The foil strip is mounted on a deformable nose at the probe tip so that the strip and coils will conform to the surface to which they are applied.

  4. Passive pavement-mounted acoustical linguistic drive alert system and method

    DOE Patents [OSTI]

    Kisner, Roger A. (Knoxville, TN); Anderson, Richard L. (Oak Ridge, TN); Carnal, Charles L. (Cookeville, TN); Hylton, James O. (Clinton, TN); Stevens, Samuel S. (Harriman, TN)

    2001-01-01

    Systems and methods are described for passive pavement-mounted acoustical alert of the occupants of a vehicle. A method of notifying a vehicle occupant includes providing a driving medium upon which a vehicle is to be driven; and texturing a portion of the driving medium such that the textured portion interacts with the vehicle to produce audible signals, the textured portion pattern such that a linguistic message is encoded into the audible signals. The systems and methods provide advantages because information can be conveyed to the occupants of the vehicle based on the location of the vehicle relative to the textured surface.

  5. Lava channel formation during the 2001 eruption on Mount Etna: evidence for mechanical erosion

    E-Print Network [OSTI]

    Carmelo Ferlito; Jens Siewert

    2005-12-14

    We report the direct observation of a peculiar lava channel that was formed near the base of a parasitic cone during the 2001 eruption on Mount Etna. Erosive processes by flowing lava are commonly attributed to thermal erosion. However, field evidence strongly suggests that models of thermal erosion cannot explain the formation of this channel. Here, we put forward the idea that the essential erosion mechanism was abrasive wear. By applying a simple model from tribology we demonstrate that the available data agree favorably with our hypothesis. Consequently, we propose that erosional processes resembling the wear phenomena in glacial erosion are possible in a volcanic environment.

  6. NedPower Mount Storm II Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceII Jump to: navigation,National Marine FisheriesPolicyNedPower Mount Storm II Wind

  7. Accelerating Atomic Orbital-based Electronic Structure Calculation via Pole Expansion plus Selected Inversion

    SciTech Connect (OSTI)

    Lin, Lin; Chen, Mohan; Yang, Chao; He, Lixin

    2012-02-10

    We describe how to apply the recently developed pole expansion plus selected inversion (PEpSI) technique to Kohn-Sham density function theory (DFT) electronic structure calculations that are based on atomic orbital discretization. We give analytic expressions for evaluating charge density, total energy, Helmholtz free energy and atomic forces without using the eigenvalues and eigenvectors of the Kohn-Sham Hamiltonian. We also show how to update the chemical potential without using Kohn-Sham eigenvalues. The advantage of using PEpSI is that it has a much lower computational complexity than that associated with the matrix diagonalization procedure. We demonstrate the performance gain by comparing the timing of PEpSI with that of diagonalization on insulating and metallic nanotubes. For these quasi-1D systems, the complexity of PEpSI is linear with respect to the number of atoms. This linear scaling can be observed in our computational experiments when the number of atoms in a nanotube is larger than a few hundreds. Both the wall clock time and the memory requirement of PEpSI is modest. This makes it even possible to perform Kohn-Sham DFT calculations for 10,000-atom nanotubes on a single processor. We also show that the use of PEpSI does not lead to loss of accuracy required in a practical DFT calculation.

  8. The space density of cataclysmic variables: constraints from the ROSAT North Ecliptic Pole Survey

    E-Print Network [OSTI]

    M. L. Pretorius; C. Knigge; D. O'Donoghue; J. P. Henry; I. M. Gioia; C. R. Mullis

    2007-09-12

    We use the ROSAT North Ecliptic Pole (NEP) survey to construct a small, but purely X-ray flux-limited sample of cataclysmic variable stars (CVs). The sample includes only 4 systems, 2 of which (RX J1715.6+6856 and RX J1831.7+6511) are new discoveries. We present time-resolved spectroscopy of the new CVs and measure orbital periods of 1.64 \\pm 0.02 h and 4.01\\pm 0.03 h for RX 1715.6+6856 and RX J1831.7+6511, respectively. We also estimate distances for all the CVs in our sample, based mainly on their apparent brightness in the infrared. The space density of the CV population represented by our small sample is (1.1 +2.3/-0.7) 10^-5 pc^-3. We can also place upper limits on the space density of any sub-population of CVs too faint to be included in the NEP survey. In particular, we show that if the overall space density of CVs is as high as 2 10^-4 pc^-3 (as has been predicted theoretically), the vast majority of CVs must be fainter than L_X \\simeq 2 10^29 erg/s.

  9. Optical Characterization of Epsilon-Near-Zero, Epsilon-Near-Pole and Hyperbolic Response in Nanowire Metamaterials

    E-Print Network [OSTI]

    Starko-Bowes, Ryan; Newman, Ward; Hu, Huan; Kallos, Themos; Palikaras, George; Fedosejevs, Robert; Pramanik, Sandipan; Jacob, Zubin

    2015-01-01

    We report on the optical and physical characterization of metallic nanowire (NW) metamaterials fabricated by electrodeposition of ~30 nm diameter gold nanowires in nano-porous anodic aluminum oxide. We observe a uniaxial anisotropic dielectric response for the NW metamaterials that displays both epsilon-near-zero (ENZ) and epsilon-near-pole (ENP) resonances. We show that a fundamental difference in the behavior of NW-metamaterials from metal-dielectric multilayer (ML) metamaterials is the differing directions of the epsilon-near-zero (ENZ) and epsilon-near-pole (ENP) dielectric responses relative to the optical axis of the effective dielectric tensor. In contrast to multilayer metamaterials, nanowire metamaterials exhibit an omnidirectional ENP and an angularly dependent ENZ. Also in contrast to ML metamaterials, the NW metamaterials exhibit ENP and ENZ resonances that are highly absorptive and can be effectively excited from free space. Our fabrication allows a large tunability of the epsilon-near-zero reson...

  10. Determination of the pole and (MS)-bar masses of the top quark from the tt-bar cross section

    E-Print Network [OSTI]

    Baringer, Philip S.; Bean, Alice; Carrasco-Lizarraga, M. A.; Chen, G.; Clutter, Justace Randall; McGivern, Carrie Lynne; Sekaric, Jadranka; Wilson, Graham Wallace; D0 Collaboration; Abazov, V. M.; Abbott, B.; Acharya, B.S.; Adams, M.; Adams, T.

    2011-09-20

    Physics Letters B 703 (2011) 422–427 D s D V A O S A R G A M E D S M S S T. D G S Y Z M J. D G Z D P. I. D T. W V H R C A 03 doContents lists available at ScienceDirect Physics Letters B www.elsevier.com/locate/physletb etermination of the pole and MS... of integrated luminosity collected by the D0 experiment at the Fermilab Tevatron Collider. The extracted top quark pole mass and MS mass are compared to the current Tevatron average top quark mass obtained from direct measurements. © 2011 Elsevier B.V. The mass...

  11. 3D-PSTD for modelling second harmonic generation in periodically poled lithium niobate ridge-type waveguides

    E-Print Network [OSTI]

    Devaux, Fabrice

    2015-01-01

    We report an application of the tri-dimensional pseudo-spectral time domain algorithm, that solves with accuracy the nonlinear Maxwell's equations, to predict second harmonic generation in lithium niobate ridge-type waveguides with high index contrast. Characteristics of the nonlinear process such as conversion efficiency as well as impact of the multimode character of the waveguide are investigated as a function of the waveguide geometry in uniformly and periodically poled medium.

  12. 7 dB quadrature squeezing at 860 nm with periodically-poled KTiOPO4

    E-Print Network [OSTI]

    Shigenari Suzuki; Hidehiro Yonezawa; Fumihiko Kannari; Masahide Sasaki; Akira Furusawa

    2006-08-15

    We observed -7.2 dB quadrature squeezing at 860 nm by using a sub-threshold continuous-wave pumped optical parametric oscillator with a periodically-poled KTiOPO4 crystal as a nonlinear optical medium. The squeezing level was measured with the phase of homodyne detection locked at the quadrature. The blue light induced infrared absorption was not observed in the experiment.

  13. Numerical evaluation of the thermal performances of roof-mounted radiant barriers

    E-Print Network [OSTI]

    Miranville, Frédéric; Lucas, Franck; Johan, Seriacaroupin

    2014-01-01

    This paper deals with the thermal performances of roof-mounted radiant barriers. Using dynamic simulations of a mathematical model of a whole test cell including a radiant barrier installed between the roof top and the ceiling, the thermal performance of the roof is calculated. The mean method is more particularly used to assess the thermal resistance of the building component and lead to a value which is compared to the one obtained for a mass insulation product such as polyurethane foam. On a further stage, the thermal mathematical model is replaced by a thermo-aeraulic model which is used to evaluate the thermal resistance of the roof as a function of the airflow rate. The results shows a better performance of the roof in this new configuration, which is widely used in practice. Finally, the mathematical relation between the thermal resistance and the airflow rate is proposed.

  14. Pyrometer mount for a closed-circuit thermal medium cooled gas turbine

    DOE Patents [OSTI]

    Jones, Raymond Joseph (Duanesburg, NY); Kirkpatrick, Francis Lawrence (late of Galway, NY); Burns, James Lee (Schenectady, NY); Fulton, John Robert (Clifton Park, NY)

    2002-01-01

    A steam-cooled second-stage nozzle segment has an outer band and an outer cover defining a plenum therebetween for receiving cooling steam for flow through the nozzles to the inner band and cover therefor and return flow through the nozzles. To measure the temperature of the buckets of the stage forwardly of the nozzle stage, a pyrometer boss is electron beam-welded in an opening through the outer band and TIG-welded to the outer cover plate. By machining a hole through the boss and seating a linearly extending tube in the boss, a line of sight between a pyrometer mounted on the turbine frame and the buckets is provided whereby the temperature of the buckets can be ascertained. The welding of the boss to the outer band and outer cover enables steam flow through the plenum without leakage, while providing a line of sight through the outer cover and outer band to measure bucket temperature.

  15. Application analysis of Monte Carlo to estimate the capacity of geothermal resources in Lawu Mount

    SciTech Connect (OSTI)

    Supriyadi, E-mail: supriyadi-uno@yahoo.co.nz [Physics, Faculty of Mathematics and Natural Sciences, University of Jember, Jl. Kalimantan Kampus Bumi Tegal Boto, Jember 68181 (Indonesia); Srigutomo, Wahyu [Complex system and earth physics, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung, Jl. Ganesha 10, Bandung 40132 (Indonesia); Munandar, Arif [Kelompok Program Penelitian Panas Bumi, PSDG, Badan Geologi, Kementrian ESDM, Jl. Soekarno Hatta No. 444 Bandung 40254 (Indonesia)

    2014-03-24

    Monte Carlo analysis has been applied in calculation of geothermal resource capacity based on volumetric method issued by Standar Nasional Indonesia (SNI). A deterministic formula is converted into a stochastic formula to take into account the nature of uncertainties in input parameters. The method yields a range of potential power probability stored beneath Lawu Mount geothermal area. For 10,000 iterations, the capacity of geothermal resources is in the range of 139.30-218.24 MWe with the most likely value is 177.77 MWe. The risk of resource capacity above 196.19 MWe is less than 10%. The power density of the prospect area covering 17 km{sup 2} is 9.41 MWe/km{sup 2} with probability 80%.

  16. Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project Scoping and Feasibility.

    SciTech Connect (OSTI)

    Pratt, Joseph William; Harris, Aaron P

    2013-01-01

    A barge-mounted hydrogen-fueled proton exchange membrane (PEM) fuel cell system has the potential to reduce emissions and fossil fuel use of maritime vessels in and around ports. This study determines the technical feasibility of this concept and examines specific options on the U.S. West Coast for deployment practicality and potential for commercialization.The conceptual design of the system is found to be straightforward and technically feasible in several configurations corresponding to various power levels and run times.The most technically viable and commercially attractive deployment options were found to be powering container ships at berth at the Port of Tacoma and/or Seattle, powering tugs at anchorage near the Port of Oakland, and powering refrigerated containers on-board Hawaiian inter-island transport barges. Other attractive demonstration options were found at the Port of Seattle, the Suisun Bay Reserve Fleet, the California Maritime Academy, and an excursion vessel on the Ohio River.

  17. A low-cost mirror mount control system for optics setups

    E-Print Network [OSTI]

    Gopalakrishnan, Maithreyi

    2013-01-01

    We describe a flexible, simple to build, low-cost, and computer-controlled optical mirror actuator system we developed for undergraduate research laboratories. Geared motors for hobby robotics are controlled by an Arduino microcontroller board in combination with an H bridge to finely position the mirror mount actuators. We present a graphical user interface based on the free Python script language. The price of the fully controlled actuator system is thus only a small fraction of the price of any commercial system; however, it is quickly implementable due to the use of open hardware electronics. We show the performance of the system and give an outlook for future expansions and use in advanced optical setups.

  18. Geological interpretation of Mount Ciremai geothermal system from remote sensing and magneto-teluric analysis

    E-Print Network [OSTI]

    Sumintadireja, Prihadi; Irawan, Dasapta E; Irawan, Diky; Fadillah, Ahmad

    2015-01-01

    The exploration of geothermal system at Mount Ciremai has been started since the early 1980s and has just been studied carefully since the early 2000s. Previous studies have detected the potential of geothermal system and also the groundwater mechanism feeding the system. This paper will discuss the geothermal exploration based on regional scale surface temperature analysis with Landsat image to have a more detail interpretation of the geological setting and magneto-telluric or MT survey at prospect zones, which identified by the previous method, to have a more exact and in depth local scale structural interpretation. Both methods are directed to pin point appropriate locations for geothermal pilot hole drilling and testing. We used four scenes of Landsat Enhanced Thematic Mapper or ETM+ data to estimate the surface manifestation of a geothermal system. Temporal analysis of Land Surface Temperature or LST was applied and coupled with field temperature measurement at seven locations. By combining the TTM with ...

  19. A retrospective tiered environmental assessment of the Mount Storm Wind Energy Facility, West Virginia,USA

    SciTech Connect (OSTI)

    Efroymson, Rebecca Ann; Day, Robin; Strickland, M. Dale

    2012-11-01

    Bird and bat fatalities from wind energy projects are an environmental and public concern, with post-construction fatalities sometimes differing from predictions. Siting facilities in this context can be a challenge. In March 2012 the U.S. Fish and Wildlife Service (USFWS) released Land-based Wind Energy Guidelines to assess collision fatalities and other potential impacts to species of concern and their habitats to aid in siting and management. The Guidelines recommend a tiered approach for assessing risk to wildlife, including a preliminary site evaluation that may evaluate alternative sites, a site characterization, field studies to document wildlife and habitat and to predict project impacts, post construction studies to estimate impacts, and other post construction studies. We applied the tiered assessment framework to a case study site, the Mount Storm Wind Energy Facility in Grant County, West Virginia, USA, to demonstrate the use of the USFWS assessment approach, to indicate how the use of a tiered assessment framework might have altered outputs of wildlife assessments previously undertaken for the case study site, and to assess benefits of a tiered ecological assessment framework for siting wind energy facilities. The conclusions of this tiered assessment for birds are similar to those of previous environmental assessments for Mount Storm. This assessment found risk to individual migratory tree-roosting bats that was not emphasized in previous preconstruction assessments. Differences compared to previous environmental assessments are more related to knowledge accrued in the past 10 years rather than to the tiered structure of the Guidelines. Benefits of the tiered assessment framework include good communication among stakeholders, clear decision points, a standard assessment trajectory, narrowing the list of species of concern, improving study protocols, promoting consideration of population-level effects, promoting adaptive management through post-construction assessment and mitigation, and sharing information that can be used in other assessments.

  20. Design of a high angle of attack robotic sting mount for tests in a low speed wind tunnel 

    E-Print Network [OSTI]

    Kubler, Tommy Jack

    1989-01-01

    DESIGN OF A HIGH ANGLE OF ATTACK ROBOTIC STING MOUNT FOR TESTS IN A LOW SPEED WIND TUNNEL A Thesis by TOMMY JACK KUBLER Submitted to the Oflice of Graduate Studies of Texas AJcM University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE August 1989 Major Subject: Aerospace Engineering DESIGN OF A HIGH ANGLE OF ATTACK ROBOTIC STING MOUNT FOR TESTS IN A IOW SPEED WIND TUNNEL A Thesis bv TOMMY JACK KHBLER Approved as to style and content by: Thomas C...

  1. EXPERIMENTAL TESTS OF COMPETITIVE MARKETS FOR ELECTRIC POWER Simon Ede, Timothy Mount, William Schulze, Robert Thomas, Ray Zimmerman

    E-Print Network [OSTI]

    CSMAE06 EXPERIMENTAL TESTS OF COMPETITIVE MARKETS FOR ELECTRIC POWER Simon Ede, Timothy Mount@cornell.edu, rjt1@cornell.edu, rz10@cornell.edu Abstract Testing the performance of electricity markets have been shown to be efficient. There is evidence from operating electricity markets that prices can

  2. 1. Detect ground faults in PV arrays mounted on the roofs of 2. Interrupt the fault current

    E-Print Network [OSTI]

    Johnson, Eric E.

    1. Detect ground faults in PV arrays mounted on the roofs of dwellings 2. Interrupt the fault current 3. Indicate that a ground fault had occurred 4. Disconnect the faulted part of the PV array 5. "Crowbar" (short-circuit) the PV array The original GFPD prototype was developed in two versions that were

  3. SmartColor: Real-Time Color Correction and Contrast for Optical See-Through Head-Mounted Displays

    E-Print Network [OSTI]

    -through head-mounted displays (OHMD) perceive color as a blend of the display color and the background. Color-blending correction aims at mitigating color blending by producing an alternative color which, when blended present SmartColor, a middleware for color management of user- interface components in OHMD. Smart

  4. Development of the recess mounting with monolithic metallization optoelectronic integrated circuit technology for optical clock distribution applications

    E-Print Network [OSTI]

    Atmaca, Eralp, 1976-

    2007-01-01

    Recess mounting with monolithic metallization, or RM3 integration, is used to integrate Ino.47Ga0.53As/InP based lattice-matched high quantum efficiency p-i-n photodetectors on silicon chips to build high performance ...

  5. Talk to the Virtual Hands: Self-Animated Avatars Improve Communication in Head-Mounted Display Virtual

    E-Print Network [OSTI]

    Talk to the Virtual Hands: Self-Animated Avatars Improve Communication in Head-Mounted Display Virtual Environments Trevor J. Dodds1 *, Betty J. Mohler1 , Heinrich H. Bu¨ lthoff1,2 1 Human Perception¨lthoff HH (2011) Talk to the Virtual Hands: Self-Animated Avatars Improve Communication in Head

  6. Standard Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This test method describes the measurement of the net heat flux normal to a surface using flat gages mounted onto the surface. Conduction heat flux is not the focus of this standard. Conduction applications related to insulation materials are covered by Test Method C 518 and Practices C 1041 and C 1046. The sensors covered by this test method all use a measurement of the temperature difference between two parallel planes normal to the surface to determine the heat that is exchanged to or from the surface in keeping with Fourier’s Law. The gages operate by the same principles for heat transfer in either direction. 1.2 This test method is quite broad in its field of application, size and construction. Different sensor types are described in detail in later sections as examples of the general method for measuring heat flux from the temperature gradient normal to a surface (1). Applications include both radiation and convection heat transfer. The gages have broad application from aerospace to biomedical en...

  7. Ultraviolet laser-induced poling inhibition produces bulk domains in MgO-doped lithium niobate crystals

    SciTech Connect (OSTI)

    Boes, Andreas, E-mail: s3363819@student.rmit.edu.au; Steigerwald, Hendrik; Sivan, Vijay; Mitchell, Arnan [School of Electrical and Computer Engineering, RMIT University, Melbourne, Victoria 3001 (Australia); ARC Center for Ultra-high Bandwidth Devices for Optical Systems (CUDOS), RMIT University, Melbourne, Victoria 3001 (Australia); Yudistira, Didit [School of Electrical and Computer Engineering, RMIT University, Melbourne, Victoria 3001 (Australia); Wade, Scott [Faculty of Science, Engineering and Technology, Swinburne University of Technology, Hawthorn, Victoria 3122 (Australia); Mailis, Sakellaris [Optoelectronics Research Centre, University of Southampton, Highfield, Southampton SO17 1BJ (United Kingdom); Soergel, Elisabeth [Institute of Physics, University of Bonn, Wegelerstr. 8, 53115 Bonn (Germany)

    2014-09-01

    We report the realization of high-resolution bulk domains achieved using a shallow, structured, domain inverted surface template obtained by UV laser-induced poling inhibition in MgO-doped lithium niobate. The quality of the obtained bulk domains is compared to those of the template and their application for second harmonic generation is demonstrated. The present method enables domain structures with a period length as small as 3??m to be achieved. Furthermore, we propose a potential physical mechanism that leads to the transformation of the surface template into bulk domains.

  8. Local inverse scattering at a fixed energy for radial Schr{ö}dinger operators and localization of the Regge poles

    E-Print Network [OSTI]

    Thierry Daudé; Francois Nicoleau

    2015-06-12

    We study inverse scattering problems at a fixed energy for radial Schr\\"{o}dinger operators on $\\R^n$, $n \\geq 2$. First, we consider the class $\\mathcal{A}$ of potentials $q(r)$ which can be extended analytically in $\\Re z \\geq 0$ such that $\\mid q(z)\\mid \\leq C \\ (1+ \\mid z \\mid )^{-\\rho}$, $\\rho \\textgreater{} \\frac{3}{2}$. If $q$ and $\\tilde{q}$ are two such potentials and if the corresponding phase shifts $\\delta\\_l$ and $\\tilde{\\delta}\\_l$ are super-exponentially close, then $q=\\tilde{q}$. Secondly, we study the class of potentials $q(r)$ which can be split into $q(r)=q\\_1(r) + q\\_2(r)$ such that $q\\_1(r)$ has compact support and $q\\_2 (r) \\in \\mathcal{A}$. If $q$ and $\\tilde{q}$ are two such potentials, we show that for any fixed $a\\textgreater{}0$, ${\\ds{\\delta\\_l - \\tilde{\\delta}\\_l \\ = \\ o \\left( \\frac{1}{l^{n-3}} \\ \\left( {\\frac{ae}{2l}}\\right)^{2l}\\right)}}$ when $l \\rightarrow +\\infty$ if and only if $q(r)=\\tilde{q}(r)$ for almost all $r \\geq a$. The proofs are close in spirit with the celebrated Borg-Marchenko uniqueness theorem, and rely heavily on the localization of the Regge poles that could be defined as the resonances in the complexified angular momentum plane. We show that for a non-zero super-exponentially decreasing potential, the number of Regge poles is always infinite and moreover, the Regge poles are not contained in any vertical strip in the right-half plane. For potentials with compact support, we are able to give explicitly their asymptotics. At last, for potentials which can be extended analytically in $\\Re z \\geq 0$ with $\\mid q(z)\\mid \\leq C \\ (1+ \\mid z \\mid )^{-\\rho}$, $\\rho \\textgreater{}1$ , we show that the Regge poles are confined in a vertical strip in the complex plane.

  9. Efficient generation of highly squeezed light and second harmonic wave with periodically poled MgO:LiNbO_3

    E-Print Network [OSTI]

    Genta Masada; Tsuyoshi Suzudo; Yasuhiro Satoh; Hideki Ishizuki; Takunori Taira; Akira Furusawa

    2009-12-21

    We report on effective generation of continuous-wave squeezed light and second harmonics with a periodically poled MgO:LiNbO$_{\\mathrm{3}}$ (PPMgLN) crystal which enables us to utilize the large nonlinear optical coefficient $d_{\\mathrm{33}}$. We achieved the squeezing level of $-7.60 \\pm 0.15$dB at 860 nm by utilizing a subthreshol optical parametric oscillator with a PPMgLN crystal. We also generated 400 mW of second harmonics at 430 nm from 570 mW of fundamental waves with 70% of conversion efficiency by using a PPMgLN crystal inside an external cavity.

  10. Generation of a squeezed vacuum resonant on Rubidium D_1 line with periodically-poled KTiOPO_4

    E-Print Network [OSTI]

    Takahito Tanimura; Daisuke Akamatsu; Yoshihiko Yokoi; Akira Furusawa; Mikio Kozuma

    2006-03-23

    We report generation of a continuous-wave squeezed vacuum resonant on the Rb D_1 line (795 nm) using periodically poled KTiOPO_4 (PPKTP) crystals. With a frequency doubler and an optical parametric oscillator based on PPKTP crystals, we observed a squeezing level of -2.75 +- 0.14 dB and an anti-squeezing level of +7.00 +- 0.13 dB. This system could be utilized for demonstrating storage and retrieval of the squeezed vacuum, which is important for the ultra-precise measurement of atomic spins as well as quantum information processing.

  11. Feasibility of acoustic neutrino detection in ice: First results from the South Pole Acoustic Test Setup (SPATS)

    E-Print Network [OSTI]

    S. Böser; C. Bohm; F. Descamps; J. Fischer; A. Hallgren; R. Heller; S. Hundertmark; K. Krieger; R. Nahnhauer; M. Pohl; P. B. Price; K. -H. Sulanke; D. Tosi; J. Vandenbroucke

    2007-08-15

    Astrophysical neutrinos in the EeV range (particularly those generated by the interaction of cosmic rays with the cosmic microwave background) promise to be a valuable tool to study astrophysics and particle physics at the highest energies. Much could be learned from temporal, spectral, and angular distributions of ~100 events, which could be collected by a detector with ~100 km^3 effective volume in a few years. Scaling the optical Cherenkov technique to this scale is prohibitive. However, using the thick ice sheet available at the South Pole, the radio and acoustic techniques promise to provide sufficient sensitivity with sparse instrumentation. The best strategy may be a hybrid approach combining all three techniques. A new array of acoustic transmitters and sensors, the South Pole Acoustic Test Setup, was installed in three IceCube holes in January 2007. The purpose of SPATS is to measure the attenuation length, background noise, and sound speed for 10-100 kHz acoustic waves. Favorable results would pave the way for a large hybrid array. SPATS is the first array to study the possibility of acoustic neutrino detection in ice, the medium expected to be best for the purpose. First results from SPATS are presented.

  12. Department of Entomology LANDSCAPE & ORNAMENTALS

    E-Print Network [OSTI]

    Pittendrigh, Barry

    hatch into adults that re-infest the declining tree. Often, more than 100 beetles per square foot the borer out of the trunk in a flow of sap. Under full sun condi- tions, healthy trees have enough energy

  13. The Propagation of Ornamental Plants. 

    E-Print Network [OSTI]

    DeWerth, A. F.

    1970-01-01

    Mist Propagation ............................................................................................................... 28 Mist Systems... equal to twice the size of the seed which will result in the seed being covered at about the depth of the seed. Water the seedbed thoroughly with water applied with a mist nozzle so the seed will not be washed out of the soil. When the seedlings...

  14. Department of Entomology LANDSCAPE & ORNAMENTALS

    E-Print Network [OSTI]

    Pittendrigh, Barry

    . The A slug in wood chips (Photo by: John Obermeyer, Extension, Purdue University) A black slug on corn leaf- TIONS, REENTRY INTERVALS, HARVEST RESTRICTIONS, STORAGE AND DISPOSAL, AND ANY SPECIFIC WARNINGS AND

  15. Department of Entomology Landscape & Ornamentals

    E-Print Network [OSTI]

    Pittendrigh, Barry

    Entomologist Fungus gnat adult Fungus gnat and shore fly adults are commonly found hovering about the surface program. DESCRIPTION, LIFE CYCLE AND DAMAGE Fungus Gnats Adults are small (1/8 inch long), slender, black a mosquito. Adults are weak fliers and are normally found flying or running over the growing medium surface

  16. Scale Insects on Ornamental Plants 

    E-Print Network [OSTI]

    Muegge, Mark A.; Merchant, Michael E.

    2000-08-21

    Scale insects damage landscape plants, shrubs and trees. This publication explains how to control scale insects economically without damaging the environment, including sampling for scale crawlers, using natural enemies and applying pesticides....

  17. Controlling Diseases on Ornamental Plants. 

    E-Print Network [OSTI]

    Horne, C. Wendell; Johnson, Jerral D.; Walla, Walter J.

    1979-01-01

    on elms and other shade trees. Mushroom-type fu ngal growths appear on trunk, limbs or roots near the soil surface. Rots may be present for several years before mushrooms ap pear. Tree becomes sus ceptible to wi nd damage. Plants may die back..., irises, lilies, narcissus and tulips. ROOT DISEASES Disease Cotton root rot (fungi) Crown gall Mushroom root rot Symptoms Small flowering plants die within a few days. Shrubs and trees die more slowly. Large trees may die within several...

  18. Memory effect in 001 poled 0.92Pb,,Zn1/3Nb2/3...O30.08PbTiO3 single crystals

    E-Print Network [OSTI]

    Cao, Wenwu

    Memory effect in 001 poled 0.92Pb,,Zn1/3Nb2/3...O3­0.08PbTiO3 single crystals Mingrong Shen and pyroelectric measurements in 001 poled rhombohedral phase 0.92Pb Zn1/3Nb2/3 O3­0.08PbTiO3 single crystals from room temperature to 250 °C. An interesting poling history dependence has been revealed from

  19. Complete set of elastic, dielectric, and piezoelectric coefficents of 0.93Pb,,Zn1/3Nb2/3...O30.07PbTiO3 single crystal poled along 011

    E-Print Network [OSTI]

    Cao, Wenwu

    ­0.07PbTiO3 single crystal poled along 011 Rui Zhang Department of Physics, Harbin Institute of Technology, and piezoelectric coefficients of rhomboheral phase 0.93Pb Zn1/3Nb2/3 O3­0.07PbTiO3 single crystal poled along 011 boundary MPB exhibit superior electromechani- cal properties at room temperature when being poled along

  20. Control of Surface Mounted Permanent Magnet Motors with Special Application to Fractional-Slot Concentrated Windings

    SciTech Connect (OSTI)

    Lawler, J.S.

    2005-12-21

    It is well known that the ability of the permanent magnet synchronous machine (PMSM) to operate over a wide constant power speed range (CPSR) is dependent upon the machine inductance [1,2,3,4,5]. Early approaches for extending CPSR operation included adding supplementary inductance in series with the motor [1] and the use of anti-parallel thyristor pairs in series with the motor-phase windings [5]. The increased inductance method is compatible with a voltage-source inverter (VSI) controlled by pulse-width modulation (PWM) which is called the conventional phase advance (CPA) method. The thyristor method has been called the dual mode inverter control (DMIC). Neither of these techniques has met with wide acceptance since they both add cost to the drive system and have not been shown to have an attractive cost/benefit ratio. Recently a method has been developed to use fractional-slot concentrated windings to significantly increase the machine inductance [6]. This latest approach has the potential to make the PMSM compatible with CPA without supplemental external inductance. If the performance of such drive is acceptable, then the method may make the PMSM an attractive option for traction applications requiring a wide CPSR. A 30 pole, 6 kW, 6000 maximum revolutions per minute (rpm) prototype of the fractional-slot PMSM design has been developed [7]. This machine has significantly more inductance than is typical of regular PMSMs. The prototype is to be delivered in late 2005 to the Oak Ridge National Laboratory (ORNL) for testing and development of a suitable controller. In advance of the test/control development effort, ORNL has used the PMSM models developed over a number of previous studies to study the steady-state performance of high-inductance PMSM machines with a view towards control issues. The detailed steady-state model developed includes all motor and inverter-loss mechanisms and will be useful in assessing the performance of the dynamic controller to be developed in future work. This report documents the results of this preliminary investigation.

  1. Fuel Economy and Emissions Effects of Low Tire Pressure, Open Windows, Roof Top and Hitch-Mounted Cargo, and Trailer

    SciTech Connect (OSTI)

    Thomas, John F [ORNL] [ORNL; Huff, Shean P [ORNL] [ORNL; West, Brian H [ORNL] [ORNL

    2014-01-01

    To quantify the fuel economy (FE) effect of some common vehicle accessories or alterations, a compact passenger sedan and a sport utility vehicle (SUV) were subjected to SAE J2263 coastdown procedures. Coastdowns were conducted with low tire pressure, all windows open, with a roof top or hitch-mounted cargo carrier, and with the SUV pulling an enclosed cargo trailer. From these coastdowns, vehicle dynamometer coefficients were developed which enabled the execution of vehicle dynamometer experiments to determine the effect of these changes on vehicle FE and emissions over standard drive cycles and at steady highway speeds. The FE penalty associated with the rooftop cargo box mounted on the compact sedan was as high as 25-27% at higher speeds, where the aerodynamic drag is most pronounced. For both vehicles, use of a hitch mounted cargo tray carrying a similar load resulted in very small FE penalties, unlike the rooftop cargo box. The results for the SUV pulling a 3500 pound enclosed cargo trailer were rather dramatic, resulting in FE penalties ranging from 30%, for the city cycle, to 50% at 80 mph, at which point significant CO generation indicated protective enrichment due to high load. Low tire pressure cases resulted in negligible to 10% FE penalty depending on the specific case and test point. Driving with all four windows open decreased FE by 4-8.5% for the compact sedan, and 1-4% for the SUV.

  2. Compact source of narrow-band counterpropagating polarization-entangled photon pairs using a single dual-periodically poled crystal

    E-Print Network [OSTI]

    Yan-Xiao Gong; Zhen-Da Xie; Ping Xu; Xiao-Qiang Yu; Peng Xue; Shi-Ning Zhu

    2011-12-20

    We propose a scheme for the generation of counterpropagating polarization-entangled photon pairs from a dual-periodically poled crystal. Compared with the usual forward-wave type source, this source, in the backward-wave way, has a much narrower bandwidth. With a 2-cm-long bulk crystal, the bandwidths of the example sources are estimated to be 3.6 GHz, and the spectral brightnesses are more than 100 pairs/(s GHz mW). Two concurrent quasi-phase-matched spontaneous parametric down-conversion processes in a single crystal enable our source to be compact and stable. This scheme does not rely on any state projection and applies to both degenerate and non-degenerate cases, facilitating applications of the entangled photons.

  3. Quantum limit of the laser linewidth in chaotic cavities and statistics of residues of scattering matrix poles

    E-Print Network [OSTI]

    H. Schomerus; K. M. Frahm; M. Patra; C. W. J. Beenakker

    1999-11-01

    The quantum-limited linewidth of a laser cavity is enhanced above the Schawlow-Townes value by the Petermann factor K, due to the non-orthogonality of the cavity modes. We derive the relation between the Petermann factor and the residues of poles of the scattering matrix and investigate the statistical properties of the Petermann factor for cavities in which the radiation is scattered chaotically. For a single scattering channel we determine the complete probability distribution of K and find that the average Petermann factor $$ depends non-analytically on the area of the opening, and greatly exceeds the most probable value. For an arbitrary number N of scattering channels we calculate $$ as a function of the decay rate $\\Gamma$ of the lasing mode. We find for $N\\gg 1$ that for typical values of $\\Gamma$ the average Petermann factor $\\propto \\sqrt{N}\\gg 1$ is parametrically larger than unity.

  4. Statistics of resonance poles, phase shifts and time delays in quantum chaotic scattering for systems with broken time reversal invariance

    E-Print Network [OSTI]

    Yan. V. Fyodorov; H. -J. Sommers

    1997-01-07

    Assuming the validity of random matrices for describing the statistics of a closed chaotic quantum system, we study analytically some statistical properties of the S-matrix characterizing scattering in its open counterpart. In the first part of the paper we attempt to expose systematically ideas underlying the so-called stochastic (Heidelberg) approach to chaotic quantum scattering. Then we concentrate on systems with broken time-reversal invariance coupled to continua via M open channels. By using the supersymmetry method we derive: (i) an explicit expression for the density of S-matrix poles (resonances) in the complex energy plane (ii) an explicit expression for the parametric correlation function of densities of eigenphases of the S-matrix. We use it to find the distribution of derivatives of these eigenphases with respect to the energy ("partial delay times" ) as well as with respect to an arbitrary external parameter.

  5. S-matrix poles for chaotic quantum systems as eigenvalues of complex symmetric random matrices: from isolated to overlapping resonances

    E-Print Network [OSTI]

    H. -J. Sommers; Yan V. Fyodorov; M. Titov

    1998-07-09

    We study complex eigenvalues of large $N\\times N$ symmetric random matrices of the form ${\\cal H}=\\hat{H}-i\\hat{\\Gamma}$, where both $\\hat{H}$ and $\\hat{\\Gamma}$ are real symmetric, $\\hat{H}$ is random Gaussian and $\\hat{\\Gamma}$ is such that $NTr \\hat{\\Gamma}^2_2\\sim Tr \\hat{H}_1^2$ when $N\\to \\infty$. When $\\hat{\\Gamma}\\ge 0$ the model can be used to describe the universal statistics of S-matrix poles (resonances) in the complex energy plane. We derive the ensuing distribution of the resonance widths which generalizes the well-known $\\chi^2$ distribution to the case of overlapping resonances. We also consider a different class of "almost real" matrices when $\\hat{\\Gamma}$ is random and uncorrelated with $\\hat{H}$.

  6. Analysis of core samples from the BPXA-DOE-USGS Mount Elbert gas hydrate stratigraphic test well: Insights into core disturbance and handling

    E-Print Network [OSTI]

    Kneafsey, Timothy J.

    2010-01-01

    Mount Elbert Well) during drilling and coring operationsWell in February 2007. Coring was performed while using a custom oil-based drillingWell, pressure coring was not used, thus the core was depressurized upon ascent. Drilling

  7. Examination of core samples from the Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope: Effects of retrieval and preservation

    E-Print Network [OSTI]

    Collett, T.J. Kneafsey, T.J., H. Liu, W. Winters, R. Boswell, R. Hunter, and T.S.

    2012-01-01

    Mount Elbert Well) during drilling and coring operationsWell in February 2007. Coring was performed while using a custom oil-based drillingWell, pressure coring was not used, thus the core was depressurized upon ascent. Drilling

  8. Evacuated optical structure comprising optical bench mounted to sidewall of vacuum chamber in a manner which inhibits deflection and rotation of the optical bench

    DOE Patents [OSTI]

    Bowers, Joel M. (Livermore, CA)

    1994-01-01

    An improved evacuated optical structure is disclosed comprising an optical bench mounted in a vacuum vessel in a manner which inhibits transmission of movement of the vacuum vessel to the optical bench, yet provides a compact and economical structure. The vacuum vessel is mounted, through a sidewall thereof, to a support wall at four symmetrically positioned and spaced apart areas, each of which comprises a symmetrically positioned group of mounting structures passing through the sidewall of the vacuum vessel. The optical bench is pivotally secured to the vacuum vessel by four symmetrically spaced apart bolts and spherical bearings, each of which is centrally positioned within one of the four symmetrically positioned groups of vacuum vessel mounting structures. Cover plates and o-ring seals are further provided to seal the vacuum vessel mounting structures from the interior of the vacuum vessel, and venting bores are provided to vent trapped gases in the bores used to secure the cover plates and o-rings to the vacuum vessel. Provision for detecting leaks in the mounting structures from the rear surface of the vacuum vessel sidewall facing the support wall are also provided. Deflection to the optical bench within the vacuum vessel is further minimized by tuning the structure for a resonant frequency of at least 100 Hertz.

  9. Evacuated optical structure comprising optical bench mounted to sidewall of vacuum chamber in a manner which inhibits deflection and rotation of the optical bench

    DOE Patents [OSTI]

    Bowers, J.M.

    1994-04-19

    An improved evacuated optical structure is disclosed comprising an optical bench mounted in a vacuum vessel in a manner which inhibits transmission of movement of the vacuum vessel to the optical bench, yet provides a compact and economical structure. The vacuum vessel is mounted, through a sidewall thereof, to a support wall at four symmetrically positioned and spaced apart areas, each of which comprises a symmetrically positioned group of mounting structures passing through the sidewall of the vacuum vessel. The optical bench is pivotally secured to the vacuum vessel by four symmetrically spaced apart bolts and spherical bearings, each of which is centrally positioned within one of the four symmetrically positioned groups of vacuum vessel mounting structures. Cover plates and o-ring seals are further provided to seal the vacuum vessel mounting structures from the interior of the vacuum vessel, and venting bores are provided to vent trapped gases in the bores used to secure the cover plates and o-rings to the vacuum vessel. Provision for detecting leaks in the mounting structures from the rear surface of the vacuum vessel sidewall facing the support wall are also provided. Deflection to the optical bench within the vacuum vessel is further minimized by tuning the structure for a resonant frequency of at least 100 Hertz. 10 figures.

  10. AN ORIGIN FOR THE SOUTH POLE-AITKEN BASIN THORIUM. V.I. Chikmachev, S.G.Pugacheva, Sternberg State Astronomical institute. Moscow University.

    E-Print Network [OSTI]

    Shevchenko, Vladislav

    AN ORIGIN FOR THE SOUTH POLE-AITKEN BASIN THORIUM. V.I. Chikmachev, S.G.Pugacheva, Sternberg State, that within the limits of the possible Al-Khwarizmi/King basin [3]. The SPA basin thorium map: The using data Lunar Prospector [4] the thorium distribution map demonstrated a hemisphere of the Moon which contains

  11. Pure low-frequency flexural mode of [011]c poled relaxor-PbTiO3 single crystals excited by k32 mode

    E-Print Network [OSTI]

    Cao, Wenwu

    promising for applications in low fre- quency piezoelectric devices. Another low-frequency mode crystals poled along [011]c exhibits superior lateral extensional piezoelectric response, which enables of the pseudo-cubic direction. Recently, it was found that the shear piezoelectric coefficients d36 could excess

  12. Ambient Airborne Solids Concentrations Including Volcanic Ash at Hanford, Washington Sampling Sites Subsequent to the Mount St. Helens Eruption

    SciTech Connect (OSTI)

    Sehmel, G.A.

    1982-12-20

    A major eruption of Mount St. Helens occurred on May 18, 1980. Subsequently, airborne solid concentrations were measured as a function of time at two sites within the southern edge of the fallout plume about 211 km east of Mount St. Helens. This ash was a source for investigating area-wide resuspension. Rain had a variable effect on decreasing airborne concentrations from resuspension. From 0.5 to 1.5 cm of rain were required to significantly reduce airborne solid concentrations through July. For a more aged resuspension source in September, a rain of 2.0 cm had a negligible effect. A monthly average threshold-wind speed for resuspension was defined as 3.6 m/s. For monthly-average wind speeds less than the threshold wind speed, monthly-average airborne concentrations tended to decrease with time. A decrease was recorded between September and October. For this 4-month time period, the half-life was on the order of 50 days, corresponding to a weathering rate of 5.1 year/sup -1/.

  13. CANDIDATE CLUSTERS OF GALAXIES AT z > 1.3 IDENTIFIED IN THE SPITZER SOUTH POLE TELESCOPE DEEP FIELD SURVEY

    SciTech Connect (OSTI)

    Rettura, A.; Stern, D.; Martinez-Manso, J.; Gettings, D.; Gonzalez, A. H.; Mei, S.; Ashby, M. L. N.; Brodwin, M.; Stanford, S. A.; Bartlett, J. G.

    2014-12-20

    We present 279 galaxy cluster candidates at z > 1.3 selected from the 94 deg{sup 2} Spitzer South Pole Telescope Deep Field (SSDF) survey. We use a simple algorithm to select candidate high-redshift clusters of galaxies based on Spitzer/IRAC mid-infrared data combined with shallow all-sky optical data. We identify distant cluster candidates adopting an overdensity threshold that results in a high purity (80%) cluster sample based on tests in the Spitzer Deep, Wide-Field Survey of the Boötes field. Our simple algorithm detects all three 1.4 < z ? 1.75 X-ray detected clusters in the Boötes field. The uniqueness of the SSDF survey resides not just in its area, one of the largest contiguous extragalactic fields observed with Spitzer, but also in its deep, multi-wavelength coverage by the South Pole Telescope (SPT), Herschel/SPIRE, and XMM-Newton. This rich data set will allow direct or stacked measurements of Sunyaev-Zel'dovich effect decrements or X-ray masses for many of the SSDF clusters presented here, and enable a systematic study of the most distant clusters on an unprecedented scale. We measure the angular correlation function of our sample and find that these candidates show strong clustering. Employing the COSMOS/UltraVista photometric catalog in order to infer the redshift distribution of our cluster selection, we find that these clusters have a comoving number density n{sub c}=(0.7{sub ?0.6}{sup +6.3})×10{sup ?7} h{sup 3} Mpc{sup ?3} and a spatial clustering correlation scale length r {sub 0} = (32 ± 7) h {sup –1} Mpc. Assuming our sample is comprised of dark matter halos above a characteristic minimum mass, M {sub min}, we derive that at z = 1.5 these clusters reside in halos larger than M{sub min}=1.5{sub ?0.7}{sup +0.9}×10{sup 14} h{sup ?1} M{sub ?}. We find that the mean mass of our cluster sample is equal to M{sub mean}=1.9{sub ?0.8}{sup +1.0}×10{sup 14} h{sup ?1} M{sub ?}; thus, our sample contains the progenitors of present-day massive galaxy clusters.

  14. A Measurement of Gravitational Lensing of the Cosmic Microwave Background by Galaxy Clusters Using Data from the South Pole Telescope

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Baxter, E. J.; Keisler, R.; Dodelson, S.; Aird, K. A.; Allen, S. W.; Ashby, M. L.N.; Bautz, M.; Bayliss, M.; Benson, B. A.; Bleem, L. E.; et al

    2015-06-22

    Clusters of galaxies are expected to gravitationally lens the cosmic microwave background (CMB) and thereby generate a distinct signal in the CMB on arcminute scales. Measurements of this effect can be used to constrain the masses of galaxy clusters with CMB data alone. Here we present a measurement of lensing of the CMB by galaxy clusters using data from the South Pole Telescope (SPT). We also develop a maximum likelihood approach to extract the CMB cluster lensing signal and validate the method on mock data. We quantify the effects on our analysis of several potential sources of systematic error andmore »find that they generally act to reduce the best-fit cluster mass. It is estimated that this bias to lower cluster mass is roughly 0.85? in units of the statistical error bar, although this estimate should be viewed as an upper limit. Furthermore, we apply our maximum likelihood technique to 513 clusters selected via their Sunyaev–Zeldovich (SZ) signatures in SPT data, and rule out the null hypothesis of no lensing at 3.1?. The lensing-derived mass estimate for the full cluster sample is consistent with that inferred from the SZ flux: (68% C.L., statistical error only).« less

  15. J- and Ks-band Galaxy Counts and Color Distributions in the AKARI North Ecliptic Pole Field

    E-Print Network [OSTI]

    Koji Imai; Hideo Matsuhara; Shinki Oyabu; Takehiko Wada; Toshinobu Takagi; Naofumi Fujishiro; Hitoshi Hanami; Chris P. Pearson

    2007-02-09

    We present the J- and Ks-band galaxy counts and galaxy colors covering 750 square arcminutes in the deep AKARI North Ecliptic Pole (NEP) field, using the FLoridA Multi-object Imaging Near-ir Grism Observational Spectrometer (FLAMINGOS) on the Kitt Peak National Observatory (KPNO) 2.1m telescope. The limiting magnitudes with a signal-to-noise ratio of three in the deepest regions are 21.85 and 20.15 in the J- and Ks-bands respectively in the Vega magnitude system. The J- and Ks-band galaxy counts in the AKARI NEP field are broadly in good agreement with those of other results in the literature, however we find some indication of a change in the galaxy number count slope at J~19.5 and over the magnitude range 18.0 < Ks < 19.5. We interpret this feature as a change in the dominant population at these magnitudes because we also find an associated change in the B - Ks color distribution at these magnitudes where the number of blue samples in the magnitude range 18.5 < Ks < 19.5 is significantly larger than that of Ks < 17.5.

  16. The orbits of the uranian satellites and rings, the gravity field of the uranian system, and the orientation of the pole of Uranus

    SciTech Connect (OSTI)

    Jacobson, R. A.

    2014-11-01

    French et al. determined the orbits of the Uranian rings, the orientation of the pole of Uranus, and the gravity harmonics of Uranus from Earth-based and Voyager ring occultations. Jacobson et al. determined the orbits of the Uranian satellites and the masses of Uranus and its satellites from Earth-based astrometry and observations acquired with the Voyager 2 spacecraft; they used the gravity harmonics and pole from French et al. Jacobson and Rush reconstructed the Voyager 2 trajectory and redetermined the Uranian system gravity parameters, satellite orbits, and ring orbits in a combined analysis of the data used previously augmented with additional Earth-based astrometry. Here we report on an extension of that work that incorporates additional astrometry and ring occultations together with improved data processing techniques.

  17. Method and apparatus for mounting a dichroic mirror in a microwave powered lamp assembly using deformable tabs

    DOE Patents [OSTI]

    Ury, M.; Sowers, F.; Harper, C.; Love, W.

    1998-11-24

    A microwave powered electrodeless lamp includes an improved screen unit having mesh and solid sections with an internal reflector secured at the juncture of the two sections to reflect light into a light-transmitting chamber defined in the lamp microwave cavity by the reflector and the mesh section. A discharge envelope of a bulb is disposed in the light-transmitting chamber. Light emitted from the envelope is prevented by the reflector from entering the cavity portion bounded by the solid section of the screen. The reflector is mounted in the cavity by tabs formed in the screen unit and bendable into the cavity to define support planes abutting respective surfaces of the reflector. The mesh section and tabs are preferably formed by etching a thin metal sheet. 7 figs.

  18. Method and apparatus for mounting a dichroic mirror in a microwave powered lamp assembly using deformable tabs

    DOE Patents [OSTI]

    Ury, Michael (Bethesda, MD); Sowers, Frank (Frederick, MD); Harper, Curt (Wheaton, MD); Love, Wayne (Olney, MD)

    1998-01-01

    A microwave powered electrodeless lamp includes an improved screen unit having mesh and solid sections with an internal reflector secured at the juncture of the two sections to reflect light into a light-transmitting chamber defined in the lamp microwave cavity by the reflector and the mesh section. A discharge envelope of a bulb is disposed in the light-transmitting chamber. Light emitted from the envelope is prevented by the reflector from entering the cavity portion bounded by the solid section of the screen. The reflector is mounted in the cavity by tabs formed in the screen unit and bendable into the cavity to define support planes abutting respective surfaces of the reflector. The mesh section and tabs are preferably formed by etching a thin metal sheet.

  19. Enhanced optical communication and broadband sub-shot-noise interferometry with a stable free-running periodically-poled-KTiOPO4 squeezer

    E-Print Network [OSTI]

    Daruo Xie; Matthew Pysher; Jietai Jing; Olivier Pfister

    2007-06-06

    An intrinsically stable type-I optical parametric oscillator was built with a periodically poled KTiOPO4 (PPKTP) crystal to generate a stable bright, continuous-wave, broadband phase-squeezed beam. A 3.2 dB sensitivity enhancement of optical interferometry was demonstrated on weak electrooptic modulation signals within a 20 MHz squeezing bandwidth. This also realized a channel capacity increase beyond that of coherent optical communication.

  20. Investigation of gas hydrate-bearing sandstone reservoirs at the "Mount Elbert" stratigraphic test well, Milne Point, Alaska

    SciTech Connect (OSTI)

    Boswell, R.M.; Hunter, R.; Collett, T.; Digert, S. Inc., Anchorage, AK); Hancock, S.; Weeks, M. Inc., Anchorage, AK); Mt. Elbert Science Team

    2008-01-01

    In February 2007, the U.S. Department of Energy, BP Exploration (Alaska), Inc., and the U.S. Geological Survey conducted an extensive data collection effort at the "Mount Elbert #1" gas hydrates stratigraphic test well on the Alaska North Slope (ANS). The 22-day field program acquired significant gas hydrate-bearing reservoir data, including a full suite of open-hole well logs, over 500 feet of continuous core, and open-hole formation pressure response tests. Hole conditions, and therefore log data quality, were excellent due largely to the use of chilled oil-based drilling fluids. The logging program confirmed the existence of approximately 30 m of gashydrate saturated, fine-grained sand reservoir. Gas hydrate saturations were observed to range from 60% to 75% largely as a function of reservoir quality. Continuous wire-line coring operations (the first conducted on the ANS) achieved 85% recovery through 153 meters of section, providing more than 250 subsamples for analysis. The "Mount Elbert" data collection program culminated with open-hole tests of reservoir flow and pressure responses, as well as gas and water sample collection, using Schlumberger's Modular Formation Dynamics Tester (MDT) wireline tool. Four such tests, ranging from six to twelve hours duration, were conducted. This field program demonstrated the ability to safely and efficiently conduct a research-level openhole data acquisition program in shallow, sub-permafrost sediments. The program also demonstrated the soundness of the program's pre-drill gas hydrate characterization methods and increased confidence in gas hydrate resource assessment methodologies for the ANS.

  1. BRIGHTNESS AND FLUCTUATION OF THE MID-INFRARED SKY FROM AKARI OBSERVATIONS TOWARD THE NORTH ECLIPTIC POLE

    SciTech Connect (OSTI)

    Pyo, Jeonghyun; Jeong, Woong-Seob [Korea Astronomy and Space Science Institute (KASI), Daejeon 305-348 (Korea, Republic of); Matsumoto, Toshio [Department of Physics and Astronomy, Seoul National University, Seoul 151-742 (Korea, Republic of); Matsuura, Shuji, E-mail: jhpyo@kasi.re.kr [Institute of Space and Astronautical Science (ISAS), Japan Aerospace Exploration Agency (JAXA), Kanagawa 252-5210 (Japan)

    2012-12-01

    We present the smoothness of the mid-infrared sky from observations by the Japanese infrared astronomical satellite AKARI. AKARI monitored the north ecliptic pole (NEP) during its cold phase with nine wave bands covering from 2.4 to 24 {mu}m, out of which six mid-infrared bands were used in this study. We applied power-spectrum analysis to the images in order to search for the fluctuation of the sky brightness. Observed fluctuation is explained by fluctuation of photon noise, shot noise of faint sources, and Galactic cirrus. The fluctuations at a few arcminutes scales at short mid-infrared wavelengths (7, 9, and 11 {mu}m) are largely caused by the diffuse Galactic light of the interstellar dust cirrus. At long mid-infrared wavelengths (15, 18, and 24 {mu}m), photon noise is the dominant source of fluctuation over the scale from arcseconds to a few arcminutes. The residual fluctuation amplitude at 200'' after removing these contributions is at most 1.04 {+-} 0.23 nW m{sup -2} sr{sup -1} or 0.05% of the brightness at 24 {mu}m and at least 0.47 {+-} 0.14 nW m{sup -2} sr{sup -1} or 0.02% at 18 {mu}m. We conclude that the upper limit of the fluctuation in the zodiacal light toward the NEP is 0.03% of the sky brightness, taking 2{sigma} error into account.

  2. Contol of Surface Mounted Permanent Magnet Motors with Special Application to Motors with Fractional-Slot Concentrated Windings

    SciTech Connect (OSTI)

    Patil, N.; Lawler, J.S.; McKeever, J.

    2007-07-31

    A 30-pole, 6-kW prototype of a fractional-slot permanent magnet synchronous motor (PMSM) design has been developed to operate at a maximum speed of 6000 rpm [1,2]. This machine has significantly more inductance than regular PMSMs with distributed windings. The prototype was delivered in April 2006 to the Oak Ridge National Laboratory (ORNL) for testing and development of a suitable controller. To prepare for this test/control development effort, ORNL used PMSM models developed over a number of previous studies to preview the control issues that arise when a dynamic controller drives a high inductance PMSM machine during steady state performance evaluations. The detailed steady state model developed includes all motor and inverter loss mechanisms and was useful for assessing the performance of the dynamic controller before it was put into operation. This report documents the results of tests demonstrating the effectiveness of ORNL's simple low-cost control scheme during characterization of the fractional-slot concentrated windings (FSCW) PMSM motor. The control scheme is simple because only the supply voltage magnitude and the phase angle between the back-electromotive force (emf) and the supply voltage is controlled. It is low-cost because it requires no current or phase voltage sensors.

  3. IEEE I&CPS Conf., May 7-11, San Antonio, Texas, pp. 147-152 Reliability of Lightning Resistant

    E-Print Network [OSTI]

    Tolbert, Leon M.

    facility 13.8 kV switchgear equipment, 37 padmounted unit substations and transformers, 46 pole mounted

  4. CURRICULUM VITAE Prof. Hlne R. Dickel Last updated 2014 April 29 1959 A.B. Magna cum Laude (Mathematics) Mount Holyoke College

    E-Print Network [OSTI]

    Dickel, Hélène R.

    CURRICULUM VITAE Prof. Hélène R. Dickel Last updated 2014 April 29 1 EDUCATION 1959 A.B. Magna cum for Visiting Students from Mount Holyoke College, South Hadley, MA (1974-76, 1984-85, #12;CURRICULUM VITAE Prof-2007 (retired) American Chemical Society Tour Speaker 1986-2008 (retired) #12;CURRICULUM VITAE Prof. Hélène R

  5. The Kennedy School's Human Resource Department is located at 124 Mount Auburn, suite 240 in Cambridge, MA, just a few minutes walking distance from the main campus. When you

    E-Print Network [OSTI]

    Schrag, Daniel

    Directions The Kennedy School's Human Resource Department is located at 124 Mount Auburn, suite 240 to 124 Mount Auburn. Walking from the Harvard Square Subway Station: The Kennedy School is a quick walk John F. Kennedy St. and continue down the street for three blocks. The Kennedy School is on the corner

  6. Spatial and temporal scales of force and torque acting on wall-mounted spherical particles in open channel flow

    E-Print Network [OSTI]

    Chan-Braun, Clemens; Uhlmann, Markus

    2013-01-01

    Data from direct numerical simulation of open channel flow over a geometrically rough wall at a bulk Reynolds number of 2900, generated by Chan-Braun et al. ["Force and torque acting on particles in a transitionally rough open-channel flow", J. Fluid Mech. 684, 441--474 (2011), 10.1017/jfm.2011.311] are further analysed with respect to the time and length scales of force and torque acting on the wall-mounted spheres. For the two sizes of spheres in a square arrangement (11 and 49 wall units in diameter, yielding hydraulically smooth and transitionally rough flow, respectively), the spatial structure of drag, lift and spanwise torque is investigated. The auto-correlation and spectra in time as well as the space-time correlation and convection velocities are presented and discussed. It is found that the statistics of spanwise particle torque are similar to those of shear stress at a smooth wall. Particle drag and lift are shown to differ from spanwise particle torque, exhibiting considerably smaller time and le...

  7. Highly efficient source for frequency-entangled photon pairs generated in a 3rd order periodically poled MgO-doped stoichiometric LiTaO3 crystal

    E-Print Network [OSTI]

    Heonoh Kim; Hee Jung Lee; Sang Min Lee; Han Seb Moon

    2015-06-14

    We present a highly efficient source for discrete frequency-entangled photon pairs based on spontaneous parametric down-conversion using 3rd order type-0 quasi-phase matching in a periodically poled MgO-doped stoichiometric LiTaO3 crystal pumped by a 355.66 nm laser. Correlated two-photon states were generated with automatic conservation of energy and momentum in two given spatial modes. These states have a wide spectral range, even under small variations in crystal temperature, which consequently results in higher discreteness. Frequency entanglement was confirmed by measuring two-photon quantum interference fringes without any spectral filtering.

  8. Highly efficient source for frequency-entangled photon pairs generated in a 3rd order periodically poled MgO-doped stoichiometric LiTaO3 crystal

    E-Print Network [OSTI]

    Kim, Heonoh; Lee, Sang Min; Moon, Han Seb

    2015-01-01

    We present a highly efficient source for discrete frequency-entangled photon pairs based on spontaneous parametric down-conversion using 3rd order type-0 quasi-phase matching in a periodically poled MgO-doped stoichiometric LiTaO3 crystal pumped by a 355.66 nm laser. Correlated two-photon states were generated with automatic conservation of energy and momentum in two given spatial modes. These states have a wide spectral range, even under small variations in crystal temperature, which consequently results in higher discreteness. Frequency entanglement was confirmed by measuring two-photon quantum interference fringes without any spectral filtering.

  9. Analysis of the Use of Wind Energy to Supplement the Power Needs at McMurdo Station and Amundsen-Scott South Pole Station, Antarctica (Poster)

    SciTech Connect (OSTI)

    Baring-Gould, E. I.; Robichaud, R.; McLain, K.

    2005-05-01

    This poster summarizes the analysis of the inclusion of wind-driven power generation technology into the existing diesel power plants at two U.S. Antarctic research stations, McMurdo and Amundsen-Scott South Pole Station. Staff at the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) conducted the analysis. Available data were obtained on the wind resources, power plant conditions, load, and component cost. We then used NREL's Hybrid2 power system modeling software to analyze the potential and cost of using wind turbine generators at the two aforementioned facilities.

  10. Superfund explanation of significant difference for the record of decision (EPA Region 10): Northwest Transformer/Mission Pole Superfund Site, Whatcom County, Everson, WA, December 22, 1993

    SciTech Connect (OSTI)

    NONE

    1995-03-01

    The remedial action at the Northwest Transformer Mission/Pole site in Whatcom County, Washington, is nearly complete. The purpose of this document is to inform the public that the final two piles of excavated soil containing 53 and 70 parts per million Polychlorinated Biphenyls (PCBs), respectively, will be disposed of at a hazardous waste landfill rather than by incineration. This document also discusses the results of the Environmental Protection Agency (EPA) reassessment of the selected remedy for groundwater (which was and remains no further action) in light of sampling results and the apparent removal of the source of groundwater contamination during remediation.

  11. MATERIALS DEGRADATION ANALYSIS AND DEVELOPMENT TO ENABLE ULTRA LOW COST, WEB-PROCESSED WHITE P-OLED FOR SSL

    SciTech Connect (OSTI)

    DR. DEVIN MACKENZIE

    2011-12-13

    Progress over Phase II of DE-FG02-07ER86293 'Materials Degradation Analysis and Development to Enable Ultra Low Cost, Web-Processed White P-OLED for SSL' was initially rapid in terms of device performance improvements. We exceeded our device luminance lifetime goals for printed flexible white OLEDs as laid out in our project proposal. Our Phase II performance target was to demonstrate >1500 hours luminance lifetime at 100 Cd/m2 from a printed flexible device. We now have R&D devices well in excess of 8000 hrs lifetime at 100 Cd/m2, tested in air. We also were able to produce devices which met the voltage target of >1500 hours below 15V operation. After completing the initial performance milestones, we went on to focus on color-related degradation issues which were cited as important to commercialization of the technology by our manufacturing partners. We also put additional focus on cathode work as the active material development that occurred over the STTR time period required an adaptation of the cathode from the original cathode formulations which were developed based on previous generation active layer materials. We were able to improve compatibility of the cathode with some of the newer generation active layer materials and improve device yield and voltage behavior. An additional objective of the initial Phase II was to further develop the underlying manufacturing technology and real-life product specifications. This is a key requirement that must be met to ensure eventual commercialization of this DOE-funded technology. The link between commercial investment for full commercialization and R&D efforts in OLED solid State Lighting is often a large one. Add-Vision's lower cost, printed OLED manufacturing approach is an attraction, but close engagement with manufacturing partners and addressing customer specifications is a very important link. Manufacturing technology encompasses development of moisture reduction encapsulation technology, improved cost performance, and reductions in operating voltage through thinner and higher uniformity active device layers. We have now installed a pilot encapsulation system at AVI for controlled, high throughput lamination encapsulation of flexible OLEDs in a novel process. Along with this, we have developed, with our materials supply partners, adhesives, barrier films and other encapsulation materials and we are showing total air product lifetimes in the 2-4 years range from a process consistent with our throughput goals of {approx}1M device per month ({approx}30,000 sq. ft. of processed OLEDs). Within the last year of the project, we have been working to introduce the manufacturing improvements made in our LEP deposition and annealing process to our commercial partners. Based on the success of this, a pilot scale-up program was begun. During this process, Add-Vision was acquired by a strategic partner, in no small part, because of the promise of future success of the technology as evidenced by our commercial partners pilot scale-up plans. Overall, the performance, manufacturing and product work in this project has been successful. Additional analysis and device work at LBL has also shown a unique adhesion change with device bias stressing which may result from active layer polymer cross-linking during bias stressing of device. It was shown that even small bias stresses, as a fraction of a full device lifetime stress period, result in measurable chemical change in the device. Further work needs to be conducted to fully understand the chemical nature of this interaction. Elucidation of this effect would enable doped OLED formulation to be engineered to suppress this effect and further extend lifetimes and reduce voltage climb.

  12. Mount Everest Highway

    E-Print Network [OSTI]

    Hacker, Randi; Tsutsui, William

    2007-08-08

    Broadcast Transcript: If China has a national sport, well, it's got to be Extreme Engineering. The Great Wall. The Grand Canal. The Three Gorges Dam. The railroad at the top of the world. And now the Mt. Everest Highway, a 3.2 mile paved road...

  13. Apparatus for mounting crystal

    DOE Patents [OSTI]

    Longeway, Paul A. (East Windsor, NJ)

    1985-01-01

    A thickness monitor useful in deposition or etching reactor systems comprising a crystal-controlled oscillator in which the crystal is deposited or etched to change the frequency of the oscillator. The crystal rests within a thermally conductive metallic housing and arranged to be temperature controlled. Electrode contacts are made to the surface primarily by gravity force such that the crystal is substantially free of stress otherwise induced by high temperature.

  14. Inboard seal mounting

    DOE Patents [OSTI]

    Hayes, John R. (Indianapolis, IN)

    1983-01-01

    A regenerator assembly for a gas turbine engine has a hot side seal assembly formed in part by a cast metal engine block having a seal recess formed therein that is configured to supportingly receive ceramic support blocks including an inboard face thereon having a regenerator seal face bonded thereto. A pressurized leaf seal is interposed between the ceramic support block and the cast metal engine block to bias the seal wear face into sealing engagement with a hot side surface of a rotary regenerator matrix.

  15. A 3-10 GHZLCR-matched Power Amplifier using Flip-Chip Mounted AlGaN/GaN HEMTs

    E-Print Network [OSTI]

    York, Robert A.

    amplifier using GaN- HEMTs-on-Sapphire. I INTRODUCTION GaN HEMTs have enormous potential for realizing high-power Traveling Wave Power Amplifier circuit (TWPA)[1][2] for realization of wideband power amplifiersWE4A-5 A 3-10 GHZLCR-matched Power Amplifier using Flip-Chip Mounted AlGaN/GaN HEMTs Jane J

  16. Geology and mineral resources of the Florence, Beaufort, Rocky Mount, and Norfolk 1/sup 0/ x 2/sup 0/ NTMS quadrangles. National Uranium Resource Evaluation program

    SciTech Connect (OSTI)

    Harris, W.B.

    1982-08-01

    This document provides geologic and mineral resources data for previously-issued Savannah River Laboratory hydrogeochemical and stream sediment reports of the Beaufort, Florence, Norfolk, and Rocky Mount 1/sup 0/ x 2/sup 0/ National Topographic Map Series quadrangles in the southeastern United States. This report is issued in draft form, without detailed technical and copy editing. This was done to make the report available to the public before the end of the National Uranium Resource Evaluation program.

  17. Exclusive diffractive production of real photons and vector mesons in a factorized Regge-pole model with non-linear Pomeron trajectory

    E-Print Network [OSTI]

    S. Fazio; R. Fiore; L. Jenkovszky; A. Lavorini

    2012-02-12

    Exclusive diffractive production of real photons and vector mesons in ep collisions has been studied at HERA in a wide kinematic range. Here we present and discuss a Regge-type model of real photon production (Deeply Virtual Compton Scattering), as well as production of vector mesons (VMP) treated on the same footing by using an extension of a factorized Regge-pole model proposed earlier. The model has been fitted to the HERA data. Despite the very small number of the free parameters, the model gives a satisfactory description of the experimental data, both for the total cross section as a function of the photon virtuality Q2 or the energy W in the center of mass of the gamma\\star-p system, and the differential cross sections as a function of the squared four-momentum transfer t with fixed Q2 and W.

  18. Method and device for determining the position of a cutting tool relative to the rotational axis of a spindle-mounted workpiece

    DOE Patents [OSTI]

    Williams, R.R.

    1980-09-03

    The present invention is directed to a method and device for determining the location of a cutting tool with respect to the rotational axis of a spindle-mounted workpiece. A vacuum cup supporting a machinable sacrificial pin is secured to the workpiece at a location where the pin will project along and encompass the rotational axis of the workpiece. The pin is then machined into a cylinder. The position of the surface of the cutting tool contacting the machine cylinder is spaced from the rotational axis of the workpiece a distance equal to the radius of the cylinder.

  19. Control of Surface Mounted Permanent Magnet Motors with Special Application to Fractional-Slot Motors with Concentrated Windings

    SciTech Connect (OSTI)

    McKeever, John W; Patil, Niranjan; Lawler, Jack

    2007-07-01

    A 30 pole, 6 kW, and 6000 maximum revolutions per minute (rpm) prototype of the permanent magnet synchronous motor (PMSM) with fractional-slot concentrated windings (FSCW) has been designed, built, and tested at the University of Wisconsin at Madison (UWM). This machine has significantly more inductance than that of regular PMSMs. The prototype was delivered in April 2006 to the Oak Ridge National Laboratory (ORNL) for testing and development of a controller that will achieve maximum efficiency. In advance of the test/control development effort, ORNL has used the PMSM models developed over a number of previous studies to study how steady state performance of high inductance PMSM machines relates to control issues. This report documents the results of this research. The amount of inductance that enables the motor to achieve infinite constant power speed ratio (CPSR) is given by L{sub {infinity}} = E{sub b}/{Omega}{sub b}I{sub R}, where E{sub b} is the root-mean square (rms) magnitude of the line-to-neutral back-electromotive force (emf) at base speed, {Omega}{sub b} is the base speed in electrical radians per second, and I{sub R} is the rms current rating of the motor windings. The prototype machine that was delivered to ORNL has about 1.5 times as much inductance as a typical PMSM with distributed integral slot windings. The inventors of the FSCW method, who designed the prototype machine, remarked that they were 'too successful' in incorporating inductance into their machine and that steps would be taken to modify the design methodology to reduce the inductance to the optimum value. This study shows a significant advantage of having the higher inductance rather than the optimal value because it enables the motor to develop the required power at lower current thereby reducing motor and inverter losses and improving efficiency. The main problem found with high inductance machines driven by a conventional phase advance (CPA) method is that the motor current at high speed depends solely on machine parameters and is virtually independent of the load level and the direct current (dc) supply voltage. Thus, the motor current is virtually the same at no load as at full load resulting in poor efficiency at less than full load conditions. While an inductance higher than the value cited above is warranted, it still does not ensure that the motor current is proportional to load; consequently, the problem of low efficiency at high speed and partial load is not resolved but is only mitigated. A common definition of 'base speed' is the speed at which the voltage applied to the motor armature is equal to the magnitude of the back-emf. The results in this study indicate that the dc supply voltage should be adequate to drive rated current into the motor winding at the specified base speed. At a minimum this requires sufficient voltage to overcome not only the back-emf but also the voltage drop across the internal impedance of the machine. For a high inductance PMSM, the internal impedance at base speed can be considerable and substantial additional voltage is required to overcome the internal voltage drop. It is further shown that even more voltage than the minimum required for injecting rated current at base speed can be beneficial by allowing the required power to be developed at lower current, which reduces losses in the motor and inverter components. Further, it is shown that the current is minimized at a unique speed; consequently, there may be room for optimization if the drive spends a substantial amount of its operating life at a certain speed (for example 60 mph). In this study, fundamental frequency phasor models are developed for a synchronous PMSM and the control systems that drive them is CPA. The models were compared with detailed simulations to show their validity. The result was used to design a traction drive control system with optimized efficiency to drive the fractional-slot motor with concentrated windings. The goal is to meet or exceed the FreedomCAR inverter cost and performance targets.

  20. Intensity oscillations observed with Hinode near the south pole of the Sun: leakage of low frequency magneto-acoustic waves into the solar corona

    E-Print Network [OSTI]

    A. K. Srivastava; D. Kuridze; T. V. Zaqarashvili; B. N. Dwivedi

    2008-03-07

    Aims. To study intensity oscillations in the solar chromosphere/corona above a quiet-Sun magnetic network. Methods. We analyse the time series of He II 256.32, Fe XI 188.23 and Fe XII 195.12 spectral lines observed by EUV Imaging Spectrometer (EIS) on board Hinode near the south pole. Then we use a standard wavelet tool to produce power spectra of intensity oscillations above the magnetic network. Results. We get ~7 min intensity oscillations in all spectral lines and ~13 min intensity oscillations only in He II with the probability of ~96-98 %, which probably reflects the process of magneto-acoustic wave propagation above the network. Conclusions. We suggest that field-free cavity areas under bipolar magnetic canopies in the vicinity of magnetic network may serve as resonators for the magneto-acoustic waves. The cavities with photospheric sound speed and granular dimensions may produce the waves with the observed periods. The waves may propagate upwards in the transition region/corona and cause observed intensity oscillations.

  1. AKARI Observation of the North Ecliptic Pole (NEP) Supercluster at z = 0.087: mid-infrared view of transition galaxies

    E-Print Network [OSTI]

    Ko, Jongwan; Lee, Hyung Mok; Lee, Myung Gyoon; Kim, Seong Jin; Shim, Hyunjin; Jeon, Yiseul; Hwang, Ho Seong; Willmer, Christopher N A; Malkan, Matthew A; Papovich, Casey; Weiner, Benjamin J; Matsuhara, Hideo; Oyabu, Shinki; Takagi, Toshinobu

    2011-01-01

    We present the mid-infrared (MIR) properties of galaxies within a supercluster in the North Ecliptic Pole region at z?0.087 observed with the AKARI satellite. We use data from the AKARI NEP-Wide (5.4 deg2) IR survey and the CLusters of galaxies EVoLution studies (CLEVL) mission program. We show that near-IR (3 {\\mu}m)-mid- IR (11 {\\mu}m) color can be used as an indicator of the specific star formation rate and the presence of intermediate age stellar populations. From the MIR observations, we find that red-sequence galaxies consist not only of passively evolving red early-type galaxies, but also of 1) "weak-SFG" (disk-dominated star-forming galaxies which have star formation rates lower by \\sim 4 \\times than blue-cloud galaxies), and 2) "intermediate- MXG" (bulge-dominated galaxies showing stronger MIR dust emission than normal red early-type galaxies). Those two populations can be a set of transition galaxies from blue, star-forming, late-type galaxies evolving into red, quiescent, early-type ones. We find t...

  2. Neutrino Data from IceCube and its Predecessor at the South Pole, the Antarctic Muon and Neutrino Detector Array (AMANDA)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Abbasi, R.

    IceCube is a neutrino observatory for astrophysics with parts buried below the surface of the ice at the South Pole and an air-shower detector array exposed above. The international group of sponsors, led by the National Science Foundation (NSF), that designed and implemented the experiment intends for IceCube to operate and provide data for 20 years. IceCube records the interactions produced by astrophysical neutrinos with energies above 100 GeV, observing the Cherenkov radiation from charged particles produced in neutrino interactions. Its goal is to discover the sources of high-energy cosmic rays. These sources may be active galactic nuclei (AGNs) or massive, collapsed stars where black holes have formed.[Taken from http://www.icecube.wisc.edu/] The data from IceCube's predecessor experiment and detector, AMANDA, IceCube’s predecessor detector and experiment is also available at this website. AMANDA pioneered neutrino detection in ice. Over a period of years in the 1990s, detecting “strings” were buried and activated and by 2000, AMANDA was successfully recording an average of 1,000 neutrino events per year. This site also makes available many images and video from the two experiments.

  3. Superfund Record of Decision (EPA Region 10): Northwest Transformer-Mission Pole, Whatcom County, WA. (First remedial action), (Amendment), September 1991

    SciTech Connect (OSTI)

    Not Available

    1991-09-30

    The 1.6-acre Northwest Transformer - Mission Pole site, is former transformer storage and salvage facility, is 2 miles south of Everson in Whatcom County, Washington. The site is bordered by low-density residential areas to the north and east, and farmland to the south. Storage and salvage operations were conducted in an onsite barn where PCB-contaminated dielectric fluid was drained from the transformers prior to dismantling. A 1989 Record of Decision (ROD) addressed remediation through excavation, consolidation, and onsite treatment using in-situ vitrification. The ROD amends the 1989 ROD and provides a change in the remedy for soil due to excessive cost. The primary contaminant of concern affecting the soil is PCB, an organic. The selected amended remedial action for the ROD includes incincerating approximately 70 cubic yards of soil contaminated with PCBs at levels greater than or equal to 50 mg/kg at a TSCA-approved facility and landfilling approximately 1,500 cubic yards of soil contaminated with PCBs at levels greater than or equal to 1 mg/kg and less than 50 mg/kg offsite at a TSCA-approved facility.

  4. Evaluation of the thermal resistance of a roof-mounted multi-reflective radiant barrier for tropical and humid conditions: Experimental study from field measurements

    E-Print Network [OSTI]

    Miranville, Frédéric; Guichard, Stéphane; Boyer, Harry; Praene, Jean Philippe; Bigot, Dimitri

    2012-01-01

    This paper deals with the experimental evaluation of a roof-mounted multi-reflective radiant barrier (MRRB), installed according to the state of the art, on a dedicated test cell. An existing experimental device was completed with a specific system for the regulation of the airflow rate in the upper air layer included in a typical roof from Reunion Island. Several experimental sequences were conducted to determine the thermal resistance of the roof according to several parameters and following a specific method. The mean method, well known in international standards (ISO 9869 - 1994) for the determination of the thermal resistance using dynamic data, was used. The method was implemented in a building simulation code in order to allow the determination of the thermal indicator automatically. Experimental results are proposed according to different seasonal periods and for different values of the airflow rate in the upper air layer

  5. Evaluation of the thermal resistance of a roof-mounted multi-reflective radiant barrier for tropical and humid conditions: Experimental study from field measurements

    E-Print Network [OSTI]

    Frédéric Miranville; Ali Hamada Fakra; Stéphane Guichard; Harry Boyer; Jean Philippe Praene; Dimitri Bigot

    2012-12-19

    This paper deals with the experimental evaluation of a roof-mounted multi-reflective radiant barrier (MRRB), installed according to the state of the art, on a dedicated test cell. An existing experimental device was completed with a specific system for the regulation of the airflow rate in the upper air layer included in a typical roof from Reunion Island. Several experimental sequences were conducted to determine the thermal resistance of the roof according to several parameters and following a specific method. The mean method, well known in international standards (ISO 9869 - 1994) for the determination of the thermal resistance using dynamic data, was used. The method was implemented in a building simulation code in order to allow the determination of the thermal indicator automatically. Experimental results are proposed according to different seasonal periods and for different values of the airflow rate in the upper air layer.

  6. HOME GROUNDS & ANIMALS 2014 Home Ornamentals: Weed Management in Home Ornamental Beds 4-89

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    mulches: Use of solid black plastic or a landscape fabric improves weed control compared to an organic mulch alone. Solid black plastic is more effective for weed control than the available landscape fabrics. Organic mulches: Pine bark, hardwood bark, pine straw and wood chips are all good for mulching. Watch soil

  7. The NICMOS detectors are mounted in a cryogenically cooled well inside of a dewar filled with solid Nitrogen. The cryogenic vessel contains a sparse matrix of an aluminum "sponge" into

    E-Print Network [OSTI]

    Schneider, Glenn

    THE DEWAR The NICMOS detectors are mounted in a cryogenically cooled well inside of a dewar filled with solid Nitrogen. The cryogenic vessel contains a sparse matrix of an aluminum "sponge" into which liquid in early December. On the ground, except during the System Level Thermal Vacuum Test, the dewar will remain

  8. AKARI OBSERVATION OF THE NORTH ECLIPTIC POLE (NEP) SUPERCLUSTER AT z = 0.087: MID-INFRARED VIEW OF TRANSITION GALAXIES

    SciTech Connect (OSTI)

    Ko, Jongwan [Yonsei University Observatory, Yonsei University, Seoul 120-749 (Korea, Republic of); Im, Myungshin; Lee, Hyung Mok; Lee, Myung Gyoon; Kim, Seong Jin; Jeon, Yiseul [Astronomy Program, Department of Physics and Astronomy, FPRD, Seoul National University, Seoul 151-742 (Korea, Republic of); Shim, Hyunjin [Spitzer Science Center, California Institute of Technology, MS 220-6, Pasadena, CA 91125 (United States); Hwang, Ho Seong [Service d'Astrophysique, CEA Saclay, F-91191 Gif-sur-Yvette (France); Willmer, Christopher N. A.; Weiner, Benjamin J. [Steward Observatory, University of Arizona, 933 North Cherry Avenue, Tucson, AZ 85721 (United States); Malkan, Matthew A. [Department of Physics and Astronomy, University of California at Los Angeles, CA 90095 (United States); Papovich, Casey [George P. and Cynthia W. Mitchell Institute for Fundamental Physics and Astronomy, Department of Physics, Texas A and M University, College Station, TX 77843 (United States); Matsuhara, Hideo; Takagi, Toshinobu [Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency, Kanagawa 229-8510 (Japan); Oyabu, Shinki, E-mail: jwko@yonsei.ac.kr [Graduate School of Science, Nagoya University, Furo-cho, Chikusa-ku, Nagoya, Aichi 464-8602 (Japan)

    2012-02-01

    We present the mid-infrared (MIR) properties of galaxies within a supercluster in the north ecliptic pole region at z {approx} 0.087 observed with the AKARI satellite. We use data from the AKARI NEP-Wide (5.4 deg{sup 2}) IR survey and the CLusters of galaxies EVoLution studies (CLEVL) mission program. We show that near-IR (3 {mu}m)-mid-IR (11 {mu}m) color can be used as an indicator of the specific star formation rate and the presence of intermediate-age stellar populations. From the MIR observations, we find that red-sequence galaxies consist not only of passively evolving red early-type galaxies, but also of (1) 'weak-SFGs' (disk-dominated star-forming galaxies that have star formation rates lower by {approx}4 Multiplication-Sign than blue-cloud galaxies) and (2) 'intermediate-MXGs' (bulge-dominated galaxies showing stronger MIR dust emission than normal red early-type galaxies). These two populations can be a set of transition galaxies from blue, star-forming, late-type galaxies evolving into red, quiescent, early-type ones. We find that the weak-SFGs are predominant at intermediate masses (10{sup 10} M{sub Sun} < M{sub *} < 10{sup 10.5} M{sub Sun }) and are typically found in local densities similar to the outskirts of galaxy clusters. As much as 40% of the supercluster member galaxies in this mass range can be classified as weak-SFGs, but their proportion decreases to <10% at larger masses (M{sub *} > 10{sup 10.5} M{sub Sun }) at any galaxy density. The fraction of the intermediate-MXG among red-sequence galaxies at 10{sup 10} M{sub Sun} < M{sub *} < 10{sup 11} M{sub Sun} also decreases as the density and mass increase. In particular, {approx}42% of the red-sequence galaxies with early-type morphologies are classified as intermediate-MXGs at intermediate densities. These results suggest that the star formation activity is strongly dependent on the stellar mass, but that the morphological transformation is mainly controlled by the environment.

  9. Multi-wavelength analysis of 18um-selected galaxies in the AKARI/IRC monitor field towards the North Ecliptic Pole

    E-Print Network [OSTI]

    T. Takagi; H. Matsuhara; T. Wada; S. Oyabu; K. Imai; C. P. Pearson; H. Hanami; T. Onaka; N. Fujishiro; D. Ishihara; Y. Ita; H. Kataza; W. Kim; T. Matsumoto; H. Murakami; Y. Ohyama; I. Sakon; T. Tanabe; K. Uemizu; M. Ueno; H. Watarai; F. Usui; H. M. Lee; M. Im; S. Serjeant; R. S. Savage; T. Tange; T. Nakagawa

    2007-05-10

    We present an initial analysis of AKARI 18um-selected galaxies using all 9 photometric bands at 2-24um available in the InfraRed Camera (IRC), in order to demonstrate new capabilities of AKARI cosmological surveys. We detected 72 sources at 18um in an area of 50.2 arcmin^2 in the AKARI/IRC monitor field towards the North Ecliptic Pole (NEP). From this sample, 25 galaxies with probable redshifts z>~ 0.5 are selected with a single colour cut (N2-N3>0.1) for a detailed SED analysis with ground-based BVRi'z'JK data. Using an SED radiative transfer model of starbursts covering the wavelength range UV -- submm, we derive photometric redshifts from the optical-MIR SEDs of 18um-selected galaxies. From the best-fit SED models, we show that the IRC all-band photometry is capable of tracing the steep rise in flux at the blue side of the PAH 6.2um emission feature. This indicates that the IRC all-band photometry is useful to constrain the redshift of infrared galaxies, specifically for dusty galaxies with a less prominent 4000A break. Also, we find that the flux dip between the PAH 7.7 and 11.2um emission feature is recognizable in the observed SEDs of galaxies at z~1. By using such a colour anomaly due to the PAH and silicate absorption features, unique samples of ULIRGs at z~1, `silicate-break' galaxies, can be constructed from large cosmological surveys of AKARI towards the NEP, i.e. the NEP-Deep and NEP-Wide survey. This pilot study suggests the possibility of detecting many interesting galaxy properties in the NEP-Deep and Wide surveys, such as a systematic difference in SEDs between high- and low-z ULIRGs, and a large variation of the PAH inter-band strength ratio in galaxies at high redshifts. [abridged

  10. Climbing Mount Olympus :Climbing Mount Olympus : GeometryGeometry

    E-Print Network [OSTI]

    Weijgaert, Rien van de

    to our worldis fundamental to our world Scientific:Scientific: Study of largeStudy of large is the structure of the Universe ? How big is the world ? (finite, infinite,How big is the world ? (finite, infinite,......)) How did the world begin ? When did theHow did the world begin ? When did the world begin

  11. Next Generation Luminaires Design Competition Announces 2015...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Outstanding for Versatility for its Olivio LED Sistema 2 LED pole-mounted pedestrian-scale luminaire. Finelite, Inc.: Awarded Outstanding for Serviceability for its...

  12. Tape Mounts Last 30 Days

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired Solar Fuel ProductionRecoverable CoalTailoreddoTalksFarmsCoil

  13. Analysis of core samples from the BPXA-DOE-USGS Mount Elbert gas hydrate stratigraphic test well: Insights into core disturbance and handling

    SciTech Connect (OSTI)

    Kneafsey, Timothy J.; Lu, Hailong; Winters, William; Boswell, Ray; Hunter, Robert; Collett, Timothy S.

    2009-09-01

    Collecting and preserving undamaged core samples containing gas hydrates from depth is difficult because of the pressure and temperature changes encountered upon retrieval. Hydrate-bearing core samples were collected at the BPXA-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well in February 2007. Coring was performed while using a custom oil-based drilling mud, and the cores were retrieved by a wireline. The samples were characterized and subsampled at the surface under ambient winter arctic conditions. Samples thought to be hydrate bearing were preserved either by immersion in liquid nitrogen (LN), or by storage under methane pressure at ambient arctic conditions, and later depressurized and immersed in LN. Eleven core samples from hydrate-bearing zones were scanned using x-ray computed tomography to examine core structure and homogeneity. Features observed include radial fractures, spalling-type fractures, and reduced density near the periphery. These features were induced during sample collection, handling, and preservation. Isotopic analysis of the methane from hydrate in an initially LN-preserved core and a pressure-preserved core indicate that secondary hydrate formation occurred throughout the pressurized core, whereas none occurred in the LN-preserved core, however no hydrate was found near the periphery of the LN-preserved core. To replicate some aspects of the preservation methods, natural and laboratory-made saturated porous media samples were frozen in a variety of ways, with radial fractures observed in some LN-frozen sands, and needle-like ice crystals forming in slowly frozen clay-rich sediments. Suggestions for hydrate-bearing core preservation are presented.

  14. Examination of core samples from the Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope: Effects of retrieval and preservation

    SciTech Connect (OSTI)

    Kneafsey, T.J.; Liu, T.J. H.; Winters, W.; Boswell, R.; Hunter, R.; Collett, T.S.

    2011-06-01

    Collecting and preserving undamaged core samples containing gas hydrates from depth is difficult because of the pressure and temperature changes encountered upon retrieval. Hydrate-bearing core samples were collected at the BPXA-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well in February 2007. Coring was performed while using a custom oil-based drilling mud, and the cores were retrieved by a wireline. The samples were characterized and subsampled at the surface under ambient winter arctic conditions. Samples thought to be hydrate bearing were preserved either by immersion in liquid nitrogen (LN), or by storage under methane pressure at ambient arctic conditions, and later depressurized and immersed in LN. Eleven core samples from hydrate-bearing zones were scanned using x-ray computed tomography to examine core structure and homogeneity. Features observed include radial fractures, spalling-type fractures, and reduced density near the periphery. These features were induced during sample collection, handling, and preservation. Isotopic analysis of the methane from hydrate in an initially LN-preserved core and a pressure-preserved core indicate that secondary hydrate formation occurred throughout the pressurized core, whereas none occurred in the LN-preserved core, however no hydrate was found near the periphery of the LN-preserved core. To replicate some aspects of the preservation methods, natural and laboratory-made saturated porous media samples were frozen in a variety of ways, with radial fractures observed in some LN-frozen sands, and needle-like ice crystals forming in slowly frozen clay-rich sediments. Suggestions for hydrate-bearing core preservation are presented.

  15. Improved thermal stability of [001]c poled 0.24Pb(In1/2Nb1/2)O30.47Pb (Mg1/3Nb2/3)O30.29PbTiO3 single crystal with manganese doping

    E-Print Network [OSTI]

    Cao, Wenwu

    at room temperature [12,13]. In practical applications, the change of piezoelectric coef- ficient: Piezoelectric PIN­PMN­PT Thermal stability a b s t r a c t The temperature dependence of dielectric, piezoelectric, and electromechanical coupling properties of 0.5 wt.% manganese-doped and undoped [001]c-poled 0

  16. Making 3D Printed Christmas Ornaments | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    high-tech manufacturing to Christmas tree decorations to ring in the holiday season using additive manufacturing techniques. An error occurred. Try watching this video on...

  17. IR-4 Ornamental Horticulture Program Research Report Form

    E-Print Network [OSTI]

    Lieth, J. Heinrich

    to the summer heat. There were no treatment differences in these levels on any observation date phytotoxicity index levels averaging around 1.0 in all treatments with no differences between treatments on any were present in each treatment but not uniformly on all plants; so this was not used in calculations

  18. Influences of Ancient Egypt on architecture and ornament in Scotland 

    E-Print Network [OSTI]

    Packer, John Aidan

    2012-11-28

    This work seeks to identify the forms and origins of Ancient Egyptian architecture and the complex historical progress which brought these to Scotland, identifying the affinities shared by both countries and their evolving ...

  19. ORIGINAL PAPER Potential direct fitness consequences of ornament-based

    E-Print Network [OSTI]

    Macedonia, Joseph

    Darrell J. Kemp & Joseph M. Macedonia & Tamara S. Ball & Ronald L. Rutowski Received: 8 June 2007 /Revised. M. Macedonia :R. L. Rutowski School of Life Sciences, Arizona State University, Tempe, AZ 85287

  20. Insects and Related Pests Attacking Lawns and Ornamental Plants. 

    E-Print Network [OSTI]

    Almand, Lyndon K.; Thomas, John G.

    1968-01-01

    Lawns and 0 rnamental Plants i* - .* " TEXAS AIM UNIVERSITY ,I TEXAS AGRICULTURAL EXTENSION SERVIC ' ' 1. E. Hutchison. Director. College Station, Vixtis Photographs in this publication have two numbering series . Any figure number followed by a... small "a" refers to a colored illustration . All colored illustrations appear on pages 12 through 15 . PESTS ATTACKING LAWNS Sucking Pests Southern Chinch Bugs .................................................................................. 2...

  1. Single-Source Nets of Algebraically-Quantized Reflective Liouville Potentials on the Line I. Almost-Everywhere Holomorphic Solutions of Rational Canonical Sturm-Liouville Equations with Second-Order Poles

    E-Print Network [OSTI]

    Gregory Natanson

    2015-03-15

    The paper presents the unified technique for constructing SUSY ladders of rational Liouville potentials (RLPs) starting from the so-called "Gauss-reference" (GRef) potentials exactly quantized on the line via classical Jacobi, classical (generalized) Laguerre, or Romanovski-Routh polynomials with energy-dependent indexes. Each RLP is obtained by means of the Liouville transformation (LT) of the appropriate rational canonical Sturm-Liouville equation (RCSLE) with second-order poles. The presented analysis takes advantage of the generic factorization of canonical Sturm-Liouville equations (CSLEs) in terms of intertwining "generalized" Darboux operators. We refer to the latter operators as the canonical Liouville-Darboux transformations (CLDTs) to stress that they are equivalent to three-step operations: i) the LT from the CSLE to the Schrodinger equation; ii) the Darboux transformation (DT) of the appropriate LP; and iii) the inverse LT from the Schrodinger equation to the new CSLE. It is proven that the CLDT preserves the rational form of the RCSLE if its factorization function (FF) is an almost-everywhere holomorphic (AEH) solution of the RCSLE (or, in other words, a solution with a rational logarithmic derivative). As explained in the paper there are up to four gauge transformations which convert each RCSLE of our interest into the second-order differential equations with energy-dependent polynomial coefficients. The most important result of the paper is that polynomial solutions of these equations belong to sequences of Heine polynomials obtained by varying free terms at fixed values of singular points and the appropriate characteristic exponents. This allows us to construct networks of polynomial solutions -- the so-called "r-, c-, or i-Gauss-seed" (r-, c-, or i-GS) Heine polynomials -- starting from Jacobi, (generalized) Laguerre or Routh polynomials, respectively.

  2. POLE PLACEMENT BY STATIC OUTPUT FEEDBACK FOR ...

    E-Print Network [OSTI]

    2015-10-10

    is continuous. Notice that the subset of ... of a compact space under a continuous map is compact. Using continuity of .... The space of proportion-. ality classes of ...

  3. Cluster Observations with the South Pole Telescope

    E-Print Network [OSTI]

    Plagge, Thomas Jeffrey

    2009-01-01

    noise equivalent power (NEP), the incident power required tofundamental limit is set by NEP ? , the shot noise of thepower in 1 s is given by NEP 2 ? ? 2(h?) 2 (?n) 2 = 2P ? h?,

  4. Drilling deep in South Pole Ice

    E-Print Network [OSTI]

    Karg, Timo

    2014-01-01

    To detect the tiny flux of ultra-high energy neutrinos from active galactic nuclei or from interactions of highest energy cosmic rays with the microwave background photons needs target masses of the order of several hundred cubic kilometers. Clear Antarctic ice has been discussed as a favorable material for hybrid detection of optical, radio and acoustic signals from ultra-high energy neutrino interactions. To apply these technologies at the adequate scale hundreds of holes have to be drilled in the ice down to depths of about 2500 m to deploy the corresponding sensors. To do this on a reasonable time scale is impossible with presently available tools. Remote drilling and deployment schemes have to be developed to make such a detector design reality. After a short discussion of the status of modern hot water drilling we present here a design of an autonomous melting probe, tested 50 years ago to reach a depth of about 1000 m in Greenland ice. A scenario how to build such a probe today with modern technologies...

  5. Steve Kropper WindPole Ventures, LLC

    E-Print Network [OSTI]

    . Storage far off. SOLUTION Good data/forecast (like other energy markets) PRODUCT Real time, hub height Endorsements #12;Bad Data Slows Wind 300 MW wind needs backup: ready, idle, expensive No grid level storage now. No construction. No tech risk. Big economic advantage $15k vs $65k. Invenergy, #5 in wind asset. 6 states prepaid

  6. Fiber optic mounted laser driven flyer plates

    SciTech Connect (OSTI)

    Paisley, Dennis L.

    1991-01-01

    A laser driven flyer plate where the flyer plate is deposited directly onto the squared end of an optical fiber. The plasma generated by a laser pulse drives the flyer plate toward a target. In another embodiment, a first metal layer is deposited onto the squared end of an optical fiber, followed by a layer of a dielectric material and a second metal layer. The laser pulse generates a plasma in the first metal layer, but the plasma is kept away from the second metal layer by the dielectric layer until the pressure reaches the point where shearing occurs.

  7. Fiber optic mounted laser driven flyer plates

    SciTech Connect (OSTI)

    Paisley, D.L.

    1990-12-31

    This invention is comprised of a laser driven flyer plate where the flyer plate is deposited directly onto the squared end of an optical fiber. The plasma generated by a laser pulse drives the flyer plate toward a target. In another embodiment, a first metal layer is deposited onto the squared end of an optical fiber, followed by a layer of a dielectric material and a second metal layer. The laser pulse generates a plasma in the first metal layer, but the plasma is kept away from the second metal layer by the dielectric layer until the pressure reaches the point where shearing occurs. 2 figs.

  8. Fiber optic mounted laser driven flyer plates

    SciTech Connect (OSTI)

    Paisley, D.L.

    1991-07-09

    A laser driven flyer plate is described where the flyer plate is deposited directly onto the squared end of an optical fiber. The plasma generated by a laser pulse drives the flyer plate toward a target. In another embodiment, a first metal layer is deposited onto the squared end of an optical fiber, followed by a layer of a dielectric material and a second metal layer. The laser pulse generates a plasma in the first metal layer, but the plasma is kept away from the second metal layer by the dielectric layer until the pressure reaches the point where shearing occurs.

  9. Fiber optic mounted laser driven flyer plates

    SciTech Connect (OSTI)

    Paisley, D.L.

    1990-01-01

    This invention is comprised of a laser driven flyer plate where the flyer plate is deposited directly onto the squared end of an optical fiber. The plasma generated by a laser pulse drives the flyer plate toward a target. In another embodiment, a first metal layer is deposited onto the squared end of an optical fiber, followed by a layer of a dielectric material and a second metal layer. The laser pulse generates a plasma in the first metal layer, but the plasma is kept away from the second metal layer by the dielectric layer until the pressure reaches the point where shearing occurs. 2 figs.

  10. Photovoltaic array mounting apparatus, systems, and methods

    DOE Patents [OSTI]

    West, Jack Raymond; Atchley, Brian; Hudson, Tyrus Hawkes; Johansen, Emil

    2015-04-14

    A photovoltaic array, including: (a) supports laid out on a surface in rows and columns; (b) photovoltaic modules positioned on top of the supports; and (c) fasteners connecting the photovoltaic modules to the supports, wherein the supports have an upper pedestal surface and a lower pedestal surface such that the photovoltaic modules are positioned at a non-horizontal angle when edges of the photovoltaic modules are positioned on top of the upper and lower pedestal surfaces, and wherein a portion of the fasteners rotate to lock the photovoltaic modules onto the supports.

  11. Mount Spurr Geothermal Project | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformationOliver, Pennsylvania: Energy Resources Jump|Spurr

  12. Plasma Screen Floating Mount - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass mapSpeeding access| DepartmentPeerFederal FleetUpSmall WindPrinceton PlasmaFlowPlasma

  13. Mount St. Mary's Abbey | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceII Jump to: navigation, searchsource HistoryCharleston, Nevada: EnergyNittanySt.

  14. Mount Wachusetts Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceII Jump to: navigation, searchsource HistoryCharleston, Nevada:Wind Farm Jump to:

  15. UBC Social Ecological Economic Development Studies (SEEDS) Student Report Patio Heaters

    E-Print Network [OSTI]

    heater to each customer into account. Bioethanol burners and electric infrared heaters were chosen, the Ecosmar+tm Fire AB3 Bioethanol Burner, and the PARAMOUNT +tm Offset Pole Mounted Stainless Steel Infrared

  16. WindPole Ventures LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-EnhancingEtGeorgia:Illinois: Energy ResourcesTurboPowerPortal Home >

  17. MEMS multi-pole electromagnets: Compact electron optics and undulators

    E-Print Network [OSTI]

    Harrison, Jere Charles

    2014-01-01

    laser system using MEMS optics . . . . . . . . . Heatattempt at MEMS undulators and focusing optics. . . . . .all published quadrupole optics by more than an order of

  18. POLING EFFECT ON PIEZOELECTRIC BEHAVIOR OF PZT CERAMICS

    E-Print Network [OSTI]

    Chiang, Shu-Sheng

    2011-01-01

    Solution Series Lead Titanate - Lead Zirconate Lead Oxide:Tin Oxide and Lead Titanate - Lead Hafnate," J. Res. Nat.Lead Titanate Piezoelectric Ceramics \\vith Iron Oxide

  19. Equivalent circuits and locus diagrams of salient pole synchronous machines 

    E-Print Network [OSTI]

    Nasar, Syed Abu

    1957-01-01

    the sending- and receiving-end voyages is called the toz'que angle (2) . As the load changes, the torque angle changes, and is of importance in studying power system and machine stability. The referenoe lines (Figure 6) and torque angles are also important... reference phasor and -Sr the lagging power-factor angle, Point N can be located by drawing AEr from ths orig1n o at an angle (P-a) with the negative I-axis. Xn other words, M 1s independent of receiving-end power factox. A study of the triangle MON...

  20. Fuzzy Logic Example: Pole-Balancing control system (Luger, 2005)

    E-Print Network [OSTI]

    Gordon, Scott

    /0,-8/1,0/0), zero=(0/0,8/1,16/0), pos=(0/0,8/1,16/0), bigpos=(8/0,16/0). Rules can be expressed as a Fuzzy positivezero d dt 1 -5 50 zeronegative positive force 1 -8 80 zero pos. -4-12-16 4 12 16 neg.big neg. big pos. d dt POS ZERO NEG NEG ZERO POS BP P Z Z Z P N N BN #12;Now, let's consider a particular scenario

  1. MEMS multi-pole electromagnets: Compact electron optics and undulators

    E-Print Network [OSTI]

    Harrison, Jere Charles

    2014-01-01

    electron laser system using MEMS optics . . . . . . . . .power soft x-ray source based on a 400-µm period MEMS un-micrograph of a MEMS ‘racetrack’ transformer. . . . . . .

  2. POLING EFFECT ON PIEZOELECTRIC BEHAVIOR OF PZT CERAMICS

    E-Print Network [OSTI]

    Chiang, Shu-Sheng

    2011-01-01

    Crystals: electric Ceramics, 1961," Proc. IRE, Measurementof Lead Zirconate Titanate Ceramics with Lead Partiallyof Lead Zirconate Titanate Ceramics Due to Minor Chemical

  3. Microsoft Word - xx xx 13 Midway pole replacement news release...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hansen, 503-230-4328 or 503-230-5131 BPA to hold public meeting on proposed rebuild of aging transmission line near Yakima, Wash. Portland, Ore. - The Bonneville Power...

  4. DC Resistivity Survey (Pole-Dipole Array) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePower VenturesInformation9) Wind Farm JumpAlum|Cyclone

  5. Plants of Ornamental Value for the Rio Grande Valley of Texas. 

    E-Print Network [OSTI]

    Friend, W. H. (William Heartsill)

    1942-01-01

    I studied the breeding biology and nesting ecology of the Altamira Oriole (Icterus gularis) and Northern Beardless-Tyrannulet (Camptostoma imberbe), two songbirds inhabiting remnant tracts of Tamaulipan brushland of the ...

  6. Sexual selection, natural selection and the evolution of dimorphic coloration and ornamentation in agamid lizards

    E-Print Network [OSTI]

    Stuart-Fox, D M; Ord, Terry J

    2004-01-01

    I. R. 1998 Sexual dimorphism in birds: why are there so manyMortality costs of sexual dimorphism in birds. Proc. R. Soc.the evolution of sexual dimorphism in birds. Evolution 55,

  7. Combined water use of turf and woody ornamentals in an irrigated South Texas landscape 

    E-Print Network [OSTI]

    Havlak, Roger Dale

    2004-01-01

    Landscape water conservation and potential evapotranspiration (PET or ET[p]) based irrigation programs are hindered by a lack of data on actual evapotranspiration (ET[a]) rates of multiple plant species landscapes. Irrigation coefficients...

  8. The Concept of Copies: An Archaeological View of the Terracotta Ornaments from Sisupalgarh, India

    E-Print Network [OSTI]

    Smith, ML

    2015-01-01

    after millennia of hand-molding (“Sexuality, Reproductionrole in the adoption of molding technologies and theirexact replication through molding was manifested at the same

  9. The Concept of Copies: An Archaeological View of the Terracotta Ornaments from Sisupalgarh, India

    E-Print Network [OSTI]

    Smith, ML

    2015-01-01

    development of fluid-metal casting for movable type enabledforms for molten metals, in which the casting process is

  10. Manipulating the abundance of natural enemies in ornamental landscapes with floral resource plants

    E-Print Network [OSTI]

    Hanks, Lawrence M.

    used yellow sticky cards and a vacuum sampler to collect arthropods from experimental plots in 2000 natural enemy survival and effectiveness, including microclimate, avail- ability of food for adults

  11. Use of tristimulus colorimetry to measure ornamental color in little bluestem grass (Schizachyrium scoparium [Michx.] Nash) 

    E-Print Network [OSTI]

    Snowden, John Seward

    1990-01-01

    color within the light range perceived by the human eye (Francis and Clydesdale, 1975). The basic machinery uses a light source, three filters to imitate the responses of the human eye, and photocells. Several systems of quantification of color... using tristimulus colorimetry have been developed 11 (Francis and Clydesdale, 1975). The Hunterlab Labscan Spectro Colorimeter LS 5100 with videoscreen monitor has the capability of measuring color in four systems. Concentration here...

  12. Elaborate ornaments are costly to maintain: evidence for high maintenance handicaps

    E-Print Network [OSTI]

    Clayton, Dale H.

    Zoological Museum, University of Copenhagen, Universitetsparken 15, DK 2100 Copenhagen Ø, Denmark, and c traits, i.e., the time and energy required to maintain them in good condition. We tested the hypothesis to be reinforced by the physiological costs associated with production of the traits. All other things being equal

  13. The Concept of Copies: An Archaeological View of the Terracotta Ornaments from Sisupalgarh, India

    E-Print Network [OSTI]

    Smith, ML

    2015-01-01

    Pinch, “Users as Agents of Technological Change: The Social Construction of the Automobile in the Rural United States,” Technology

  14. Wire inhomogeneity detector having a core with opposing pole pieces and guide pieces adjacent the opposing pole pieces

    DOE Patents [OSTI]

    Gibson, George H. (Lafayette, CA); Smits, Robert G. (Lafayette, CA); Eberhard, Philippe H. (El Cerrito, CA)

    1989-01-01

    A device for uncovering imperfections in electrical conducting wire, particularly superconducting wire, by detecting variations in eddy currents. Eddy currents effect the magnetic field in a gap of an inductor, contained in a modified commercial ferrite core, through which the wire being tested is passed. A small increase or decrease in the amount of conductive material, such as copper, in a fixed cross section of wire will unbalance a bridge used to measure the impedance of the inductor, tripping a detector and sounding an alarm.

  15. Overturning Circulation in an Eddy-Resolving Model: The Effect of the Pole-to-Pole Temperature Gradient

    E-Print Network [OSTI]

    Cessi, Paola

    be explicitly eddy free (e.g., Toggweiler and Samuels 1995, 1998; Samelson 1999, 2004) or at- tempt; Henning and Vallis 2004, 2005; Cessi et al. 2006). It is reason- able, then, to expect that the inclusion

  16. Two-axis tracker for solar panels and the like

    SciTech Connect (OSTI)

    Liao, Henry H.

    2013-04-16

    A tracker including an outer post having elongated bore and a lower end mounted on a sub-structure, an inner pole rotatably received in the elongated bore, a lower bearing in the bore adjacent a lower end of the outer post and attached thereto to be constrained from lateral movement and mounted on the sub-structure such that a lower end of the inner pole rests on and is supported by the lower bearing, an upper bearing near an upper end of the outer post, a circumferential drive supported on the outer post for rotating the inner pole relative to the outer post, such that substantially a full weight of a load on the inner pole is directly transmitted to the sub-structure and lateral force and torque leverage are placed on a full length of the outer post by way of the upper and lower bearing.

  17. Vibration Isolation of a Locomotive Mounted Energy Storage Flywheel 

    E-Print Network [OSTI]

    Zhang, Xiaohua

    2011-02-22

    Utilizing flywheels to store and reuse energy from regenerative braking on locomotives is a new technology being developed in the Vibration Control and Electromechanics Lab at Texas A&M. This thesis focuses on the motion analysis of a locomotive...

  18. Constant power speed range extension of surface mounted PM motors

    DOE Patents [OSTI]

    Lawler, Jack Steward (Knoxville, TN); Bailey, John Milton (Knoxville, TN)

    2001-01-01

    A circuit and method for controlling a rotating machine (11) in the constant horsepower range above base speed uses an inverter (15) having SCR's (T1-T6) connected in series with the primary commutation switches (Q1-Q6) to control turn off of the primary commutation switches and to protect the primary commutation switches from faults. The primary commutation switches (Q1-Q6) are controlled by a controller (14), to fire in advance or after a time when the back emf equals the applied voltage, and then to turn off after a precise dwell time, such that suitable power is developed at speeds up to at least six times base speed.

  19. Integrated head package for top mounted nuclear instrumentation

    DOE Patents [OSTI]

    Malandra, Louis J. (McKeesport, PA); Hornak, Leonard P. (Forest Hills, PA); Meuschke, Robert E. (Monroeville, PA)

    1993-01-01

    A nuclear reactor such as a pressurized water reactor has an integrated head package providing structural support and increasing shielding leading toward the vessel head. A reactor vessel head engages the reactor vessel, and a control rod guide mechanism over the vessel head raises and lowers control rods in certain of the thimble tubes, traversing penetrations in the reactor vessel head, and being coupled to the control rods. An instrumentation tube structure includes instrumentation tubes with sensors movable into certain thimble tubes disposed in the fuel assemblies. Couplings for the sensors also traverse penetrations in the reactor vessel head. A shroud is attached over the reactor vessel head and encloses the control rod guide mechanism and at least a portion of the instrumentation tubes when retracted. The shroud forms a structural element of sufficient strength to support the vessel head, the control rod guide mechanism and the instrumentation tube structure, and includes radiation shielding material for limiting passage of radiation from retracted instrumentation tubes. The shroud is thicker at the bottom adjacent the vessel head, where the more irradiated lower ends of retracted sensors reside. The vessel head, shroud and contents thus can be removed from the reactor as a unit and rested safely and securely on a support.

  20. Page 1 of 3 MOUNT ALLISON UNIVERSITY FACILITIES MANAGEMENT

    E-Print Network [OSTI]

    Rosebrugh, Robert

    heating plant maintenance refits; other shut down duties as required. 11. Clean and flush domestic hot to emergency call-ins outside of normal working hours as requested by the supervisor or the Stationary Engineer to the trade. 17. Respond to call-ins for emergency shift replacement when required. 18. Perform other related

  1. Sample mounting and transfer for coupling an ultrahigh vacuum...

    Office of Scientific and Technical Information (OSTI)

    low energy electron diffraction, quadrupole mass spectrometer, argon ion sputtering gun, and a variable temperature scanning tunneling microscope (VT-STM). In this system, we...

  2. Parasitic Power Collection in Shoe Mounted Devices Clyde Jake Kendall

    E-Print Network [OSTI]

    Possibilities for the "parasitic" collection of power from human walking motion are explored. The focus into the problem of capturing power "parasitically" from normal human-body-motion for use in personal electronics will present some background and perspective on the problem of capturing power parasitically from human motion

  3. Radical restructuring : the conversion of Our Lady of Mount Carmel

    E-Print Network [OSTI]

    Dubin, Peter Arthur

    1984-01-01

    This thesis studies the restructuring of a vacant parochial school in East Boston, Massachusetts, to 17 residential units of varying sizes. It formulates a process for dismantling the authoritarian imagery of the existing ...

  4. Development of pulse laser processing for mounting fiber Bragg grating

    SciTech Connect (OSTI)

    Nishimura, Aikihko; Shimada, Yukihiro; Yonemoto, Yukihiro; Suzuki, Hirokazu; Ishibashi, Hisayoshi [Quantum Beam Science Directorate, Japan Atomic Energy Agency, 8-1-7 Umebidai Kidugawa Kyoto 619-0215 (Japan); Applied Laser Technology Institute, Tsuruga Head Office, Japan Atomic Energy Agency, 65-20 Kizaki Tsuruga Fukui 914-8585 (Japan); Technical Research and Development Institute, Kumagai Gumi Co., Ltd., 2-1 Tsukudo, Shinjuku Tokyo 162-8557 (Japan)

    2012-07-11

    Pulse laser processing has been developed for the application of industrial plants in monitoring and maintenance. Surface cleaning by nano-second laser ablation was demonstrated for decontamination of oxide layers of Cr contained steel. Direct writing by femtosecond processing induced a Bragg grating in optical fiber to make it a seismic sensor for structural health monitoring. Adhesive cement was used to fix the seismic sensor on the surface of reactor coolant pipe material. Pulse laser processing and its related technologies were presented to overcome the severe accidents of nuclear power plants.

  5. Japan Tuna Fishery Bankruptcies Mount New Manuals Promote Seafood Quality

    E-Print Network [OSTI]

    management structure com- pounded by the energy crisis that struck the industry. The Agency, which in 1974 had provided 9 billion yen (US$30 million) to help the tuna industry re- cover from the energy crisis percent of the high-seas tuna fleet (of about 1,200 ves- sels) is indicative of the grave crisis

  6. Demonstration of Rack-Mounted Computer Equipment Cooling Solutions

    E-Print Network [OSTI]

    Coles, Henry

    2014-01-01

    Total  Room Total  Room Water Air  I n Electrical  I n H2O  2-1: Target chilled water and server air inlet temperatureof the chilled water and server air inlets increase for test

  7. Demonstration of Rack-Mounted Computer Equipment Cooling Solutions

    E-Print Network [OSTI]

    Coles, Henry

    2014-01-01

    included two chilled water plant energy efficiency models.best overall energy efficiency when a water-to-water CDU isthe chilled water COEE Chill-Off 2 Energy Efficiency –

  8. Direct mounted photovoltaic device with improved side clip

    DOE Patents [OSTI]

    Keenihan, James R; Boven, Michelle L; Brown, Jr., Claude; Eurich, Gerald K; Gaston, Ryan S; Hus, Michael

    2013-11-19

    The present invention is premised upon a photovoltaic assembly system for securing and/or aligning at least a plurality of vertically adjacent photovoltaic device assemblies to one another. The securing function being accomplished by a clip member that may be a separate component or integral to one or more of the photovoltaic device assemblies.

  9. Direct mounted photovoltaic device with improved front clip

    DOE Patents [OSTI]

    Keenihan, James R; Boven, Michelle; Brown, Jr., Claude; Gaston, Ryan S; Hus, Michael; Langmaid, Joe A; Lesniak, Mike

    2013-11-05

    The present invention is premised upon a photovoltaic assembly system for securing and/or aligning at least a plurality of vertically adjacent (overlapping) photovoltaic device assemblies to one another. The securing function being accomplished by a clip member that may be a separate component or integral to one or more of the photovoltaic device assemblies.

  10. How to Collect, Press, Mount and Store Plants 

    E-Print Network [OSTI]

    Ragsdale, Bobby

    2002-02-02

    Creating a plant collection is easy with these simple instructions. Photographs illustrate the steps involved in pressing plants successfully.

  11. Epson Original LCD Prism technology Front / rear / ceiling mount

    E-Print Network [OSTI]

    Ulm, Universität

    ) Lens Shift N/A Keystone Correction Electronic +/-30 degrees Brightness (typical) 3000 ANSI lumens, USB, Input Terminal: Remote Control: Stereo mini jack Remote Control Features Keystone, picture

  12. Hydrothermal Circulation At Mount St Helens Determined By Self...

    Open Energy Info (EERE)

    the dome summit. The anomaly pattern is believed to result from a combination of thermoelectric, electrokinetic, and fluid disruption effects within and surrounding the dome....

  13. Temporal Geochemical Variations In Volatile Emissions From Mount St Helens,

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-EnhancingEt Al., 2013) | Opensource History View NewsourceUsa, 1980-1994 | Open Energy

  14. Mount Morris, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformation

  15. Mount Oliver, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformationOliver, Pennsylvania: Energy Resources Jump to:

  16. Mount Pleasant, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformationOliver, Pennsylvania: Energy Resources Jump to:Pleasant,

  17. Mount Princeton Area Space Heating Low Temperature Geothermal Facility |

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformationOliver, Pennsylvania: Energy Resources Jump

  18. Mount Prospect, Illinois: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformationOliver, Pennsylvania: Energy Resources Jump| Open

  19. Mount Repose, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformationOliver, Pennsylvania: Energy Resources Jump| OpenRepose,

  20. Mount Sinai, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformationOliver, Pennsylvania: Energy Resources Jump|