National Library of Energy BETA

Sample records for mount tom canal

  1. Sandia Energy - Tom Picraux

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tom Picraux Home Tom Picraux Tom Picraux Department: Los Alamos National Laboratory (LANL) picraux...

  2. Tom Anklam

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    tom anklam Tom Anklam Tom Anklam Deputy Principal Associate Director for Science & Technology NIF & Photon Science Tom Anklam, deputy principal associate director for Science and Technology, serves as a member of the NIF&PS Senior Management Team and has leadership responsibilities for the directorate science and technology portfolio, directorate strategic planning, and international collaborations. Prior to his current assignment, Mr. Anklam worked in inertial fusion energy

  3. Tom Park | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tom Park About Us Tom Park - Director, Office of Finance and Accounting (CF-10) Tom Park Tom Park joined CFO as the Director, Office of Finance and Accounting. Previously, Tom provided federal agencies with consulting services for the implementation, and operation of financial management systems for both CSC and SRA International. Tom also served as the Deputy CFO for the Department of Transportation and the CFO for the Federal Highway Administration over a 38 year Federal career

  4. Tom O'Neill

    Broader source: Energy.gov [DOE]

    Tom O'Neill is the lead Powerpedia Curator and Ambassador, DOE Web Manager, and Federal Domain Manager.  In his Powerpedia role, he has continued to promote the value of social...

  5. ARM - Datastreams - toms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Datastreamstoms Documentation XDC documentation Data Quality Plots ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Datastream : TOMS Total Ozone Mapping Experiment Spectrometer Active Dates 1996.07.22 - 2005.12.14 Measurement Categories Aerosols, Atmospheric State, Surface Properties Originating Instrument Total Ozone Mapping Spectrometer (TOMS) Measurements The measurements below provided by this product are those

  6. Tom Vilsack | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Tom Vilsack - Secretary, U.S. Department of Agriculture Most Recent Building a 21st Century Electric Grid June 7...

  7. Tom McQuiston- Biography

    Broader source: Energy.gov [DOE]

    Tom McQuiston is a doctor of public health specializing in occupational health, safety and environment issues.

  8. Faces of Science: Tom Vestrand

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vestrand March 4, 2015 Robotic telescopes, distributed sensor networks, and machine learning: imagining our future As a child, Tom Vestrand watched Frank Capra's The Strange Case...

  9. Tom Lda | Open Energy Information

    Open Energy Info (EERE)

    Lda Jump to: navigation, search Name: Tom, Lda Place: Portugal Product: Portuguese company that is involved with the development of a 10MW STEG plant in the Moura region of...

  10. Ringleader: Tom Scarvie, Operations Supervisor

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ringleader: Tom Scarvie, Operations Supervisor Print As operations supervisor at the ALS, Tom Scarvie works with the accelerator operators and floor operators to make sure that the machine runs as well as possible and that beamline work is done safely and according to policy. The operations team strives to make sure the ALS is running reliably and at top quality all the time. Scarvie is also one of three chairs of the ALS Beamline Review Committee and he chairs the Accelerator Review Committee.

  11. ACM TOMS replicated computational results initiative (Journal...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: ACM TOMS replicated computational results initiative Citation Details ... OSTI Identifier: 1235340 Report Number(s): SAND--2015-20790J Journal ID: ISSN 0098-3500; ...

  12. Mirror mount

    DOE Patents [OSTI]

    Humpal, Harold H.

    1987-01-01

    A mirror mount (10) is provided that allows free pitch, yaw and roll motion of the mirror (28) while keeping the location of a point (56) on the surface of the mirror (28) fixed in the rest frame of reference of the mount (10). Yaw movement is provided by two yaw cylinders (30,32) that are bearing (52) mounted to provide rotation. Pitch and roll motion is provided by a spherically annular shell (42) that is air bearing (72,74) mounted to move between a clamp (60) and an upper pedestal bearing (44). The centers of curvature of the spherical surfaces of the shell (42) lie upon the point (56). Pitch motion and roll motion are separately and independently imparted to mirror (28) by a pair of pitch paddles (34) and a pair of roll paddles (36) that are independently and separately moved by control rods (76,80) driven by motors (78,82).

  13. Mirror mount

    DOE Patents [OSTI]

    Humpal, H.H.

    1987-11-10

    A mirror mount is provided that allows free pitch, yaw and roll motion of the mirror while keeping the location of a point on the surface of the mirror fixed in the rest frame of reference of the mount. Yaw movement is provided by two yaw cylinders that are bearing mounted to provide rotation. Pitch and roll motion is provided by a spherically annular shell that is air bearing mounted to move between a clamp and an upper pedestal bearing. The centers of curvature of the spherical surfaces of the shell lie upon the point. Pitch motion and roll motion are separately and independently imparted to mirror by a pair of pitch paddles and a pair of roll paddles that are independently and separately moved by control rods driven by motors. 5 figs.

  14. Mirror mount

    DOE Patents [OSTI]

    Humpal, H.H.

    1986-03-21

    A mirror mount is provided that allows free pitch, yaw and roll motion of the mirror while keeping the location of a point on the surface of the mirror fixed in the rest frame of reference of the mount. Yaw movement is provided by two yaw cylinders that are bearing mounted to provide rotation. Pitch and roll motion is provided by a spherically annular shell that is air bearing mounted to move between a clamp and an upper pedestal bearing. The centers of curvature of the spherical surfaces of the shell lie upon the point. Pitch motion and roll motion are separately and independently imparted to mirror by a pair of pitch paddles and a pair of roll paddles that are independently and separately moved by control rods driven by motors.

  15. Tomé wins Distinguished Scientist, Engineer Award

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Recipient of the 2013 Distinguished ScientistEngineer Award Tom wins Distinguished Scientist, Engineer Award The Minerals, Metals & Materials Society recognized Tom for his ...

  16. Rapporteurs Report: Tom Lograsso, Ames Laboratory and Nick Morley...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Rapporteurs Report: Tom Lograsso, Ames Laboratory and Nick Morley, Oakdene Hollins Rapporteurs Report: Tom Lograsso, Ames Laboratory and Nick Morley, Oakdene Hollins Microsoft...

  17. Tom Lograsso, Ames Laboratory (Iowa State University), Future...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tom Lograsso, Ames Laboratory (Iowa State University), Future Directions in Rare Earth Research: Critical Materials for 21st Century Industry Tom Lograsso, Ames Laboratory (Iowa...

  18. Mirror mount

    DOE Patents [OSTI]

    Kuklo, Thomas C.; Bender, Donald A.

    1994-01-01

    A unique lens or mirror mount having adjustable constraints at two key locations to allow for "X" and "Y" tilts of the mirror only. The device uses two pair of flexures of a type such that the pivots of the mirror gimble are rigidly fixed in all planes allowing the device to have zero stacking tolerance and zero wear over time.

  19. Tomé wins Distinguished Scientist, Engineer Award

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Recipient of the 2013 Distinguished Scientist/Engineer Award Tomé wins Distinguished Scientist, Engineer Award The Minerals, Metals & Materials Society recognized Tomé for his "long lasting contribution to the fundamental understanding of microstructure, properties and performance of structural materials for industrial applications." October 29, 2012 Carlos Tomé Carlos Tomé Carlos Tomé of LANL's Materials Science in Radiation and Dynamics Extremes is the recipient of the 2013

  20. Mirror mount

    DOE Patents [OSTI]

    Kuklo, T.C.; Bender, D.A.

    1994-10-04

    A unique lens or mirror mount having adjustable constraints at two key locations to allow for ''X'' and ''Y'' tilts of the mirror only is disclosed. The device uses two pair of flexures of a type such that the pivots of the mirror gimble are rigidly fixed in all planes allowing the device to have zero stacking tolerance and zero wear over time. 4 figs.

  1. Tomé to receive Khan International Medal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tomé to receive Khan International Medal Tomé to receive Khan International Medal The International Journal of Plasticity recognized Tomé for his "outstanding life-long contributions in the field of plasticity." November 18, 2015 Carlos Tomé Carlos Tomé Communications Office (505) 667-7000 The Khan International Medal is named after the International Journal of Plasticity Founding Editor-In-Chief Akhtar Khan. The International Journal of Plasticity will honor Carlos Tomé of

  2. Tape Mounts Last 30 Days

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tape Mounts Last 30 Days Tape Mounts Last 30 Days Daily Tape Mounts

  3. Tom Harper receives cyber security award

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Harper receives cyber security award Tom Harper receives cyber security award The Charlene Douglass Memorial Award recognizes an individual's expertise, dedication, and significant contributions to information security. June 8, 2009 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los

  4. ACM TOMS replicated computational results initiative

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Heroux, Michael Allen

    2015-06-03

    In this study, the scientific community relies on the peer review process for assuring the quality of published material, the goal of which is to build a body of work we can trust. Computational journals such as The ACM Transactions on Mathematical Software (TOMS) use this process for rigorously promoting the clarity and completeness of content, and citation of prior work. At the same time, it is unusual to independently confirm computational results.

  5. ACM TOMS replicated computational results initiative

    SciTech Connect (OSTI)

    Heroux, Michael Allen

    2015-06-03

    In this study, the scientific community relies on the peer review process for assuring the quality of published material, the goal of which is to build a body of work we can trust. Computational journals such as The ACM Transactions on Mathematical Software (TOMS) use this process for rigorously promoting the clarity and completeness of content, and citation of prior work. At the same time, it is unusual to independently confirm computational results.

  6. Meet CMI Researcher Tom Lograsso | Critical Materials Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tom Lograsso CMI focus area leader Tom Lograsso CMI Researcher Thomas Lograsso leads Focus Area 2, Developing Substitutes. He started this role in May 2014. Previously he led Focus Area 4, Crosscutting Research while serving as the interim director of The Ames Laboratory. Also at Ames Lab, Tom leads a BES Synthesis & Processing effort on Novel Materials Preparation and Processing Methodology, whose goal is to develop synthesis protocols for new materials including quasicrystals,

  7. Tomé wins Distinguished Scientist, Engineer Award

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineer Award October 29, 2012 Carlos Tom of LANL's Materials Science in Radiation and Dynamics Extremes is the recipient of the 2013 Distinguished ScientistEngineer Award ...

  8. PV module mounting method and mounting assembly

    DOE Patents [OSTI]

    Lenox, Carl J.S.; Johnson, Kurt M.

    2013-04-23

    A method for mounting PV modules to a deck includes selecting PV module layout pattern so that adjacent PV module edges are spaced apart. PV mounting and support assemblies are secured to the deck according to the layout pattern using fasteners extending into the deck. The PV modules are placed on the PV mounting and support assemblies. Retaining elements are located over and secured against the upper peripheral edge surfaces of the PV modules so to secure them to the deck with the peripheral edges of the PV modules spaced apart from the deck. In some examples a PV module mounting assembly, for use on a shingled deck, comprises flashing, a base mountable on the flashing, a deck-penetrating fastener engageable with the base and securable to the deck so to secure the flashing and the base to the shingled deck, and PV module mounting hardware securable to the base.

  9. Microsoft PowerPoint - 16.0805_Tom Fox [Compatibility Mode] ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    05Tom Fox Compatibility Mode Microsoft PowerPoint - 16.0805Tom Fox Compatibility Mode PDF icon Microsoft PowerPoint - 16.0805Tom Fox Compatibility Mode More Documents &...

  10. Magnetic core mounting system

    DOE Patents [OSTI]

    Ronning, Jeffrey J.

    2002-01-01

    A mounting apparatus for an electromagnetic device such as a transformer of inductor includes a generally planar metallic plate as a first heat sink, and a metallic mounting cup as a second heat sink. The mounting cup includes a cavity configured to receive the electromagnetic device, the cavity being defined by a base, and an axially-extending annular sidewall extending from the base to a flange portion of the mounting cup. The mounting cup includes first and second passages for allowing the leads of first and second windings of the electromagnetic device to be routed out of the cavity. The cavity is filled with a polyurethane potting resin, and the mounting cup, including the potted electromagnetic device, is mounted to the plate heat sink using fasteners. The mounting cup, which surrounds the electromagnetic device, in combination with the potting resin provides improved thermal transfer to the plate heat sink, as well as providing resistance to vibration and shocks.

  11. Photovoltaic module mounting system

    DOE Patents [OSTI]

    Miros, Robert H. J.; Mittan, Margaret Birmingham; Seery, Martin N; Holland, Rodney H

    2012-09-18

    A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

  12. Photovoltaic module mounting system

    DOE Patents [OSTI]

    Miros, Robert H. J.; Mittan, Margaret Birmingham; Seery, Martin N.; Holland, Rodney H.

    2012-04-17

    A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

  13. FIA-14-0055- In the Matter of Tom Clements

    Broader source: Energy.gov [DOE]

    Tom Clements (the Appellant) appealed a FOIA determination that the DOE’s Savannah River Operations Office (DOE-SR) issued to him regarding his August 2014 Freedom of Information Act request.  DOE...

  14. Tomé to receive Khan International Medal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tom has published more than 170 papers in international journals, with more than 12,000 citations. He co-authored the books Texture and Anisotropy and Fundamentals and ...

  15. FIA-12-0057- In the Matter of Tom Thielen

    Broader source: Energy.gov [DOE]

    Tom Thielen filed a Privacy Act Appeal regarding a determination issued to him by the Department of Energy’s Richland Operations Office (Richland).  Richland had previously withheld certain...

  16. High bandwidth optical mount

    DOE Patents [OSTI]

    Bender, D.A.; Kuklo, T.

    1994-11-08

    An optical mount, which directs a laser beam to a point by controlling the position of a light-transmitting optic, is stiffened so that a lowest resonant frequency of the mount is approximately one kilohertz. The optical mount, which is cylindrically-shaped, positions the optic by individually moving a plurality of carriages which are positioned longitudinally within a sidewall of the mount. The optical mount is stiffened by allowing each carriage, which is attached to the optic, to move only in a direction which is substantially parallel to a center axis of the optic. The carriage is limited to an axial movement by flexures or linear bearings which connect the carriage to the mount. The carriage is moved by a piezoelectric transducer. By limiting the carriage to axial movement, the optic can be kinematically clamped to a carriage. 5 figs.

  17. High bandwidth optical mount

    DOE Patents [OSTI]

    Bender, Donald A.; Kuklo, Thomas

    1994-01-01

    An optical mount, which directs a laser beam to a point by controlling the position of a light-transmitting optic, is stiffened so that a lowest resonant frequency of the mount is approximately one kilohertz. The optical mount, which is cylindrically-shaped, positions the optic by individually moving a plurality of carriages which are positioned longitudinally within a sidewall of the mount. The optical mount is stiffened by allowing each carriage, which is attached to the optic, to move only in a direction which is substantially parallel to a center axis of the optic. The carriage is limited to an axial movement by flexures or linear bearings which connect the carriage to the mount. The carriage is moved by a piezoelectric transducer. By limiting the carriage to axial movement, the optic can be kinematically clamped to a carriage.

  18. Mounting for windmills

    SciTech Connect (OSTI)

    Allison, W. D.

    1980-08-12

    A windmill structure includes a mounting for supporting one or a large number of windmills in an elevated position above the ground so that the windmills can weathercock and align with the wind. The mounting arrangement limits movement continuously in one direction and returns the windmill to its original position.

  19. Stable mirror mount

    DOE Patents [OSTI]

    Cutburth, R.W.

    1983-11-04

    An improved mirror mount assembly is disclosed. The mirror mount assembly provides a post assembly slidable in a Y-axis orientation and a nut plate assembly slidable in an X-axis orientation and means for simultaneously locking said post assembly and said key assembly in a fixed position.

  20. Stable mirror mount

    DOE Patents [OSTI]

    Cutburth, Ronald W. (Bulls Gap, TN)

    1990-01-01

    An improved mirror mount assembly is disclosed. The mirror mount assembly provides a post assembly slidable in a Y-axis orientation and a nut plate assembly slidable in an X-axis orientation and a device for simultaneously locking the post assembly and the key assembly in a fixed position.

  1. Optoelectronic Mounting Structure

    DOE Patents [OSTI]

    Anderson, Gene R.; Armendariz, Marcelino G.; Baca, Johnny R. F.; Bryan, Robert P.; Carson, Richard F.; Chu, Dahwey; Duckett, III, Edwin B.; McCormick, Frederick B.; Peterson, David W.; Peterson, Gary D.; Reber, Cathleen A.; Reysen, Bill H.

    2004-10-05

    An optoelectronic mounting structure is provided that may be used in conjunction with an optical transmitter, receiver or transceiver module. The mounting structure may be a flexible printed circuit board. Thermal vias or heat pipes in the head region may transmit heat from the mounting structure to the heat spreader. The heat spreader may provide mechanical rigidity or stiffness to the heat region. In another embodiment, an electrical contact and ground plane may pass along a surface of the head region so as to provide an electrical contact path to the optoelectronic devices and limit electromagnetic interference. In yet another embodiment, a window may be formed in the head region of the mounting structure so as to provide access to the heat spreader. Optoelectronic devices may be adapted to the heat spreader in such a manner that the devices are accessible through the window in the mounting structure.

  2. Mounting for ceramic scroll

    DOE Patents [OSTI]

    Petty, Jack D.

    1993-01-01

    A mounting for a ceramic scroll on a metal engine block of a gas turbine engine includes a first ceramic ring and a pair of cross key connections between the first ceramic ring, the ceramic scroll, and the engine block. The cross key connections support the scroll on the engine block independent of relative radial thermal growth and for bodily movement toward an annular mounting shoulder on the engine. The scroll has an uninterrupted annular shoulder facing the mounting shoulder on the engine block. A second ceramic ring is captured between mounting shoulder and the uninterrupted shoulder on the scroll when the latter is bodily shifted toward the mouting shoulder to define a gas seal between the scroll and the engine block.

  3. New Whole-House Solutions Case Study: Tom Walsh & Co.

    SciTech Connect (OSTI)

    none,

    2013-02-01

    Tom Walsh & Companys homes in an urban infill project in Portland achieved meets 2012 IECC insulation requirements in the marine climate with R-21 fiberglass batt walls, R-25 slab insulation and R-49 spray foam and cellulose attic floors.

  4. Building America Whole-House Solutions for New Homes: Tom Walsh & Co.,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Portland, Oregon | Department of Energy Tom Walsh & Co., Portland, Oregon Building America Whole-House Solutions for New Homes: Tom Walsh & Co., Portland, Oregon Case study of Tom Walsh & Co., who worked with Building America research partner BIRA to design HERS 59 homes with ducts in conditioned space in dropped ceiling soffits, extensive air sealing, and extensve site water management. Tom Walsh & Co.: New Columbia - Portland, Oregon (651.11 KB) More Documents &

  5. Distributed control at Love canal

    SciTech Connect (OSTI)

    McPherson, G.; Rider, G.J.; Sadowski, B.; Moore, M.

    1994-09-01

    Love Canal is known worldwide as the site of one of the worst non-nuclear environmental disasters in modern history. For 12 years, a Niagara Falls, New York chemical company used the canal bed as a chemical dump. This article discusses the computerized control of equipment used to remove the toxic materials from the ground under Love Canal, and how the minimization of maintenance is reducing maintenance costs and increasing operator safety.

  6. Housing And Mounting Structure

    DOE Patents [OSTI]

    Anderson, Gene R.; Armendariz, Marcelino G.; Baca, Johnny R.F.; Bryan, Robert P.; Carson, Richard F.; Duckett, III, Edwin B.; McCormick, Frederick B.; Miller, Gregory V.; Peterson, David W.; Smith, Terrance T.

    2005-03-08

    This invention relates to an optical transmitter, receiver or transceiver module, and more particularly, to an apparatus for connecting a first optical connector to a second optical connector. The apparatus comprises: (1) a housing having at least a first end and at least a second end, the first end of the housing capable of receiving the first optical connector, and the second end of the housing capable of receiving the second optical connector; (2) a longitudinal cavity extending from the first end of the housing to the second end of the housing; and (3) an electromagnetic shield comprising at least a portion of the housing. This invention also relates to an apparatus for housing a flexible printed circuit board, and this apparatus comprises: (1) a mounting structure having at least a first surface and a second surface; (2) alignment ridges along the first and second surfaces of the mounting structure, the alignment ridges functioning to align and secure a flexible printed circuit board that is wrapped around and attached to the first and second surfaces of the mounting structure; and (3) a series of heat sink ridges adapted to the mounting structure, the heat sink ridges functioning to dissipate heat that is generated from the flexible printed circuit board.

  7. MountPointAttributes

    Energy Science and Technology Software Center (OSTI)

    2001-06-16

    MountPointAttributes is a software component that provides client code with a technique to raise the local namespace of a file to a global namespace. Its abstractions and mechanisms allow the client code to gather global properties of a file and to use them in devising an effective storage access strategy on this file.

  8. Plasma Screen Floating Mount

    DOE Patents [OSTI]

    Eakle, Robert F.; Pak, Donald J.

    2004-10-26

    A mounting system for a flat display screen, particularly a plasma display screen, suspends the screen separately in each of the x-, y- and z-directions. A series of frames located by linear bearings and isolated by springs and dampers allows separate controlled movement in each axis. The system enables the use of relatively larger display screens in vehicles in which plasma screen are subject to damage from vibration.

  9. Surface mount component jig

    DOE Patents [OSTI]

    Kronberg, James W.

    1990-08-07

    A device for bending and trimming the pins of a dual-inline-package component and the like for surface mounting rather than through mounting to a circuit board comprises, in a first part, in pin cutter astride a holder having a recess for holding the component, a first spring therebetween, and, in a second part, two flat members pivotally interconnected by a hinge and urged to an upward peaked position from a downward peaked position by a second spring. As a downward force is applied to the pin cutter it urges the holder downward, assisted by the first spring and a pair of ridges riding on shoulders of the holder, to carry the component against the upward peaked flat members which guide the pins outwardly. As the holder continues downwardly, the flat members pivot to the downward peaked position bending the pins upwardly against the sides of the holder. When the downward movement is met with sufficient resistance, the ridges of the pin cutter ride over the holder's shoulders to continue downward to cut any excess length of pin.

  10. Solar panel truss mounting systems and methods

    DOE Patents [OSTI]

    Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell; Goodman, Joseph; Nolan, Wade; Pitelka, Taylor; Rahimzadeh, Keyan; Brooks, Bradley; Lohr, Joshua; Crooks, Ryan; Porges, Jamie; Rubin, Daniel

    2016-06-28

    An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the base rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.

  11. Solar panel truss mounting systems and methods

    DOE Patents [OSTI]

    Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell; Goodman, Joseph; Nolan, Wade; Pitelka, Taylor; Rahimzadeh, Keyan; Brooks, Bradley; Lohr, Joshua; Crooks, Ryan; Porges, Jamie; Rubin, Daniel

    2015-10-20

    An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the base rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.

  12. Building America Whole-House Solutions for New Homes: Tom Walsh...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    & Co., Portland, Oregon Case study of Tom Walsh & Co., who worked with Building America research partner BIRA to design HERS 59 homes with ducts in conditioned space in dropped...

  13. Total Ozone Mapping Spectrometer (TOMS) Derived Data, Global Earth Coverage (GEC) from NASA's Earth Probe Satellite

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    This is data from an external datastream processed through the ARM External Data Center (XDC) at Brookhaven National Laboratory. The XDC identifies sources and acquires data, called "external data", to augment the data being generated within the ARM program. The external data acquired are usually converted from native format to either netCDF or HDF formats. The GEC collection contains global data derived from the Total Ozone Mapping Spectrometer (TOMS) instrument on the Earth Probe satellite, consisting of daily values of aerosol index, ozone and reflectivity remapped into a regular 1x1.25 deg grid. Data are available from July 25, 1996 - December 31, 2005, but have been updated or replaced as of September 2007. See the explanation on the ARM web site at http://www.arm.gov/xds/static/toms.stm and the information at the NASA/TOMS web site: http://toms.gsfc.nasa.gov/ (Registration required)

  14. Tom D'Agostino to Lead NNSA's Defense Programs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tom D'Agostino to Lead NNSA's Defense Programs Tom D'Agostino to Lead NNSA's Defense Programs March 1, 2006 - 12:26pm Addthis WASHINGTON , DC - Secretary of Energy Samuel W. Bodman today announced that Thomas P. D'Agostino has been sworn in as Deputy Administrator for Defense Programs in the Department of Energy's (DOE) National Nuclear Security Administration (NNSA). Deputy Administrator D'Agostino will lead NNSA's weapons programs, which maintain the reliability of our nation's nuclear weapons

  15. VIBRATION DAMPING AND SHOCK MOUNT

    DOE Patents [OSTI]

    Stevens, D.J.; Forman, G.W.

    1963-12-10

    A shock absorbing mount in which vibrations are damped by an interference fit between relatively movable parts of the mount is described. A pair of generally cup-shaped parts or members have skirt portions disposed in an oppositely facing nesting relationship with the skirt of one member frictionally engaging the skirt of the other. The outermost skirt may be slotted to provide spring-like segments which embrace the inner skirt for effecting the interference fit. Belleville washers between the members provide yieldable support for a load carried by the mount. When a resonant frequency of vibration forces acting upon the moumt attains a certain level the kinetic energy of these forces is absorbed by sliding friction between the parts. (AEC)

  16. Bradfield Canal Hot Spring Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    Bradfield Canal Hot Spring Geothermal Area Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Bradfield Canal Hot Spring Geothermal Area Contents 1 Area Overview 2...

  17. Sandia Energy - Final FY14 Measurement Campaign in Roza Canal...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the effects on local water operations of deploying a current energy converter (CEC) turbine in an irrigation canal for the purposes of producing electricity via the canal's...

  18. Mounting support for a photovoltaic module

    DOE Patents [OSTI]

    Brandt, Gregory Michael; Barsun, Stephan K.; Coleman, Nathaniel T.; Zhou, Yin

    2013-03-26

    A mounting support for a photovoltaic module is described. The mounting support includes a foundation having an integrated wire-way ledge portion. A photovoltaic module support mechanism is coupled with the foundation.

  19. Holding fixture for metallographic mount polishing

    DOE Patents [OSTI]

    Barth, C.H.; Cramer, C.E.

    1997-12-30

    A fixture is described for holding mounted specimens for polishing, having an arm; a body attached to one end of the arm, the body having at least one flange having an opening to accommodate a mounted specimen; and a means applying pressure against the outer surface of the mounted specimen to hold the specimen in contact with the polishing surface. 3 figs.

  20. Holding fixture for metallographic mount polishing

    DOE Patents [OSTI]

    Barth, Clyde H.; Cramer, Charles E.

    1997-01-01

    A fixture for holding mounted specimens for polishing, having an arm; a body attached to one end of the arm, the body having at least one flange having an opening to accommodate a mounted specimen; and a means applying pressure against the outer surface of the mounted specimen to hold the specimen in contact with the polishing surface.

  1. The Panama Canal: It's all about connectivity

    U.S. Energy Information Administration (EIA) Indexed Site

    Panama Canal: It's all about connectivity Panama at a glance GDP growth rate - last 10 years 7.5% GDP estimated- 2013 (dollars) 38,6b GDP per capita - 2013 estimated (in dollars) 13,032 Population (million) 3.5 Unemployment rate (in %) 4.0 Inflation rate - 2013 (in %) 4.08 It's all about Connectivity * 144 trade routes * 1,700 ports * 160 countries The Panama Canal's value added service The Panama Canal Service Package Reliability Sustainability Connectivity Economies of Scale * Opens 24 hours a

  2. Nozzle and shroud assembly mounting structure

    DOE Patents [OSTI]

    Faulder, Leslie J.; Frey, deceased, Gary A.; Nielsen, Engward W.; Ridler, Kenneth J.

    1997-01-01

    The present nozzle and shroud assembly mounting structure configuration increases component life and reduces maintenance by reducing internal stress between the mounting structure having a preestablished rate of thermal expansion and the nozzle and shroud assembly having a preestablished rate of thermal expansion being less than that of the mounting structure. The mounting structure includes an outer sealing portion forming a cradling member in which an annular ring member is slidably positioned. The mounting structure further includes an inner mounting portion to which a hooked end of the nozzle and shroud assembly is attached. As the inner mounting portion expands and contracts, the nozzle and shroud assembly slidably moves within the outer sealing portion.

  3. Nozzle and shroud assembly mounting structure

    DOE Patents [OSTI]

    Faulder, L.J.; Frey, G.A.; Nielsen, E.W.; Ridler, K.J.

    1997-08-05

    The present nozzle and shroud assembly mounting structure configuration increases component life and reduces maintenance by reducing internal stress between the mounting structure having a preestablished rate of thermal expansion and the nozzle and shroud assembly having a preestablished rate of thermal expansion being less than that of the mounting structure. The mounting structure includes an outer sealing portion forming a cradling member in which an annular ring member is slidably positioned. The mounting structure further includes an inner mounting portion to which a hooked end of the nozzle and shroud assembly is attached. As the inner mounting portion expands and contracts, the nozzle and shroud assembly slidably moves within the outer sealing portion. 3 figs.

  4. Dual resolution, vacuum compatible optical mount

    DOE Patents [OSTI]

    Halpin, John Michael (Tracy, CA)

    2011-10-04

    An optical mount for an optical element includes a mounting plate, a lever arm pivot coupled to mounting plate, and an adjustment plate. The optical mount also includes a flexure pivot mechanically coupling the adjustment plate to the mounting plate and a lever arm. The optical mount further includes a first adjustment device extending from the adjustment plate to make contact with the lever arm at a first contact point. A projection of a line from the first contact point to a pivot point, measured along the lever arm, is a first predetermined distance. The optical mount additionally includes a second adjustment device extending from the adjustment plate to make contact with the lever arm at a second contact point. A projection of a line from the second contact point to the pivot point, measured along the lever arm, is a second predetermined distance greater than the first predetermined distance.

  5. Best Practices Case Study: Tom Walsh and Co. - New Columbus, Portland, OR

    SciTech Connect (OSTI)

    none,

    2010-09-01

    Case study of Tom Walsh, who achieved 50% in heating and cooling energy savings over the 2004 IECC with advanced framing, superior air sealing, extra insulation, and ducts in conditioned space. Surface water runoff in the large urban rebuild development was handled with pervious pavers, swales, retention of existing trees, and green spaces.

  6. Ocean floor mounting of wave energy converters

    DOE Patents [OSTI]

    Siegel, Stefan G

    2015-01-20

    A system for mounting a set of wave energy converters in the ocean includes a pole attached to a floor of an ocean and a slider mounted on the pole in a manner that permits the slider to move vertically along the pole and rotate about the pole. The wave energy converters can then be mounted on the slider to allow adjustment of the depth and orientation of the wave energy converters.

  7. Mount St. Mary's Abbey | Open Energy Information

    Open Energy Info (EERE)

    Energy Developments Energy Purchaser Mount St. Mary's Abbey Location Wrentham MA Coordinates 42.033096, -71.393711 Show Map Loading map... "minzoom":false,"mappings...

  8. Plasma Screen Floating Mount - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The floating mount also provides added protection to equipment investment during transit or for shipping. SRNL integrated this technology for use in a mobile laboratory van....

  9. Three-point spherical mirror mount

    DOE Patents [OSTI]

    Cutburth, R.W.

    1984-01-23

    A three-point spherical mirror mount for use with lasers is disclosed. The improved mirror mount is adapted to provide a pivot ring having an outer surface with at least three spaced apart mating points to engage an inner spherical surface of a support housing.

  10. Laser optical element mounting arrangement and method

    SciTech Connect (OSTI)

    Whitehouse, D.R.

    1988-10-11

    This patent describes a method of mounting and sealing an optical element of a laser to a mounting support member of the laser comprising the steps of providing an optical element mounting surface the the support member with a smooth surface which is sufficiently smooth to form a vacuum seal with a surface of the optical element, the vacuum seal preventing at least to a large and acceptable degree, movement of gases through the seal between the optical element and the mounting support member as a result of a gas pressure differential across the seal during operation of the laser and contacting the surface of the optical element with the mounting surface of the support member, at ambient temperature to form the vacuum seal between the surfaces without the use of a sealant between the surfaces, and therein the vacuum seal between the surfaces can be broken and remade without use of a sealant.

  11. EA-1262: McKay Bypass Canal Extension, Golden, Colorado

    Broader source: Energy.gov [DOE]

    This EA evaluates the environmental impacts for the proposal to extend the McKay Bypass Canal in order to route water from the existing Canal north of the Walnut Creek drainage on the east side of...

  12. Vibration dissipation mount for motors or the like

    DOE Patents [OSTI]

    Small, Thomas R.

    1987-01-01

    A vibration dissipation mount which permits the mounting of a motor, generator, or the like such that the rotatable shaft thereof passes through the mount and the mount permits the dissipation of self-induced and otherwise induced vibrations wherein the mount comprises a pair of plates having complementary concave and convex surfaces, a semi-resilient material being disposed therebetween.

  13. Motorized control for mirror mount apparatus

    DOE Patents [OSTI]

    Cutburth, Ronald W.

    1989-01-01

    A motorized control and automatic braking system for adjusting mirror mount apparatus is disclosed. The motor control includes a planetary gear arrangement to provide improved pitch adjustment capability while permitting a small packaged design. The motor control for mirror mount adjustment is suitable for laser beam propagation applications. The brake is a system of constant contact, floating detents which engage the planetary gear at selected between-teeth increments to stop rotation instantaneously when the drive motor stops.

  14. Tom Leckey

    Gasoline and Diesel Fuel Update (EIA)

    Feet) Gas Wells (Million Cubic Feet) Texas--State Offshore Natural Gas Withdrawals from Gas Wells (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1970's 166,983 204,717 1980's 251,122 232,143 242,856 143,948 108,091 104,052 112,154 95,053 95,944 108,398 1990's 107,409 96,885 76,638 77,883 83,577 62,381 62,624 63,903 59,732 48,537 2000's 40,883 53,285 54,672 52,206 44,630 36,532 24,529 29,121 46,657 36,820 2010's 27,421 23,791 15,953 13,650

  15. Speakers: Paul D. Holtberg, EIA John Conti, EIA Tom R. Eizember, Exxon Mobil Corporation

    U.S. Energy Information Administration (EIA) Indexed Site

    3: "EIA's 2010 Annual Energy Outlook Highlights" Speakers: Paul D. Holtberg, EIA John Conti, EIA Tom R. Eizember, Exxon Mobil Corporation Mary Novak, HIS Global Insight [Note: Recorders did not pick up introduction of panel (see biographies for details on the panelists) or introduction of session.] Paul: All right, now we're running a little bit late here after all, lunch, so let's get started if we could. Either way, my speakers will be cut down to only 10 minutes each and we'll just

  16. Mount Princeton Area Space Heating Low Temperature Geothermal...

    Open Energy Info (EERE)

    Area Space Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Mount Princeton Area Space Heating Low Temperature Geothermal Facility Facility Mount...

  17. Department of Veterans Affairs, FONSI - Ground mounted solar...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ground mounted solar photovoltaic power at San Joaquin National Cemetery Department of Veterans Affairs, FONSI - Ground mounted solar photovoltaic power at San Joaquin National ...

  18. Ball mounting fixture for a roundness gage

    DOE Patents [OSTI]

    Gauler, A.L.; Pasieka, D.F.

    1983-11-15

    A ball mounting fixture for a roundness gage is disclosed. The fixture includes a pair of chuck assemblies oriented substantially transversely with respect to one another and mounted on a common base. Each chuck assembly preferably includes a rotary stage and a wobble plate affixed thereto. A ball chuck affixed to each wobble plate is operable to selectively support a ball to be measured for roundness, with the wobble plate permitting the ball chuck to be tilted to center the ball on the axis of rotation of the rotary stage. In a preferred embodiment, each chuck assembly includes a vacuum chuck operable to selectively support the ball to be measured for roundness. The mounting fixture enables a series of roundness measurements to be taken with a conventional rotating gagehead roundness instrument, which measurements can be utilized to determine the sphericity of the ball. 6 figs.

  19. Ball mounting fixture for a roundness gage

    DOE Patents [OSTI]

    Gauler, Allen L. (Los Alamos, NM); Pasieka, Donald F. (Los Alamos, NM)

    1983-01-01

    A ball mounting fixture for a roundness gage is disclosed. The fixture includes a pair of chuck assemblies oriented substantially transversely with respect to one another and mounted on a common base. Each chuck assembly preferably includes a rotary stage and a wobble plate affixed thereto. A ball chuck affixed to each wobble plate is operable to selectively support a ball to be measured for roundness, with the wobble plate permitting the ball chuck to be tilted to center the ball on the axis of rotation of the rotary stage. In a preferred embodiment, each chuck assembly includes a vacuum chuck operable to selectively support the ball to be measured for roundness. The mounting fixture enables a series of roundness measurements to be taken with a conventional rotating gagehead roundness instrument, which measurements can be utilized to determine the sphericity of the ball.

  20. Sensor mount assemblies and sensor assemblies

    DOE Patents [OSTI]

    Miller, David H.

    2012-04-10

    Sensor mount assemblies and sensor assemblies are provided. In an embodiment, by way of example only, a sensor mount assembly includes a busbar, a main body, a backing surface, and a first finger. The busbar has a first end and a second end. The main body is overmolded onto the busbar. The backing surface extends radially outwardly relative to the main body. The first finger extends axially from the backing surface, and the first finger has a first end, a second end, and a tooth. The first end of the first finger is disposed on the backing surface, and the tooth is formed on the second end of the first finger.

  1. Cummins Rocky Mount Engine Plant | Department of Energy

    Energy Savers [EERE]

    Cummins Rocky Mount Engine Plant Cummins Rocky Mount Engine Plant sep_logo_borderless.jpg This presentation by Cummins, Inc. at the 2015 World Energy Engineering Congress shares the Rocky Mount Engine Plant's experience with achieving certification to Superior Energy Performance® (SEP(tm)) and ISO 50001. Cummins Rocky Mount Engine Plant (September 2015) (1.01 MB) More Documents & Publications SEP Case Study Webinar: Cummins Slides The Cummins Rocky Mount Engine Plant Case Study

  2. PC board mount corrosion sensitive sensor

    DOE Patents [OSTI]

    Robinson, Alex L.; Casias, Adrian L.; Pfeifer, Kent B.; Laguna, George R.

    2016-03-22

    The present invention relates to surface mount structures including a capacitive element or a resistive element, where the element has a property that is responsive to an environmental condition. In particular examples, the structure can be optionally coupled to a printed circuit board. Other apparatuses, surface mountable structures, and methods of use are described herein.

  3. Fixture for mounting small parts for processing

    DOE Patents [OSTI]

    Foreman, Larry R.; Gomez, Veronica M.; Thomas, Michael H.

    1990-01-01

    A fixture for mounting small parts, such as fusion target spheres or microelectronic components. A glass stalk is drawn and truncated near its tip. The truncated end of the glass stalk is dipped into silicone rubber forming an extending streamer. After the rubber cures for approximately 24 hours, a small part is touched to the streamer, and will be held securely throughout processing.

  4. Photovoltaic module mounting clip with integral grounding

    DOE Patents [OSTI]

    Lenox, Carl J.

    2010-08-24

    An electrically conductive mounting/grounding clip, usable with a photovoltaic (PV) assembly of the type having an electrically conductive frame, comprises an electrically conductive body. The body has a central portion and first and second spaced-apart arms extending from the central portion. Each arm has first and second outer portions with frame surface-disrupting element at the outer portions.

  5. Cancer incidence in the Love Canal area

    SciTech Connect (OSTI)

    Janerich, D.T.; Burnett, W.S.; Feck, G.; Hoff, M.; Nasca, P.; Polednak, A.P.; Greenwald, P.; Vianna, N.

    1981-06-01

    Data from the New York Cancer Registry show no evidence for higher cancer rates associated with residence near the Love Canal toxic waste burial site in comparison with the entire state outside of New York City. Rates of liver cancer, lymphoma, and leukemia, which were selected for special attention, were not consistently elevated. Among the other cancers studied, a higher rate was noted only for respiratory cancer, but it was not consistent across age groups and appeared to be related to a high rate for the entire city of Niagara Falls. There was no evidence that the lung cancer rate was associated with the toxic wastes buried at the dump site.

  6. EIS-0092: Conversion to Coal, Holyoke Water Power Company, Mt. Tom Generating Station Unit 1 Holyoke, Hampden County, Massachusetts

    Broader source: Energy.gov [DOE]

    The Economic Regulatory Administration prepared this statement to assess the environmental impacts of prohibiting Unit 1 of the Mt. Tom Generation Station Unit 1 from using either natural gas or petroleum products as a primary energy source, which would result in the utility burning low-sulfur coal.

  7. Adjustable link for kinematic mounting systems

    DOE Patents [OSTI]

    Hale, L.C.

    1997-07-01

    An adjustable link for kinematic mounting systems is disclosed. The adjustable link is a low-cost, passive device that provides backlash-free adjustment along its single constraint direction and flexural freedom in all other directions. The adjustable link comprises two spheres, two sockets in which the spheres are adjustable retain, and a connection link threadly connected at each end to the spheres, to provide a single direction of restraint and to adjust the length or distance between the sockets. Six such adjustable links provide for six degrees of freedom for mounting an instrument on a support. The adjustable link has applications in any machine or instrument requiring precision adjustment in six degrees of freedom, isolation from deformations of the supporting platform, and/or additional structural damping. The damping is accomplished by using a hollow connection link that contains an inner rod and a viscoelastic separation layer between the two. 3 figs.

  8. Adjustable link for kinematic mounting systems

    DOE Patents [OSTI]

    Hale, Layton C.

    1997-01-01

    An adjustable link for kinematic mounting systems. The adjustable link is a low-cost, passive device that provides backlash-free adjustment along its single constraint direction and flexural freedom in all other directions. The adjustable link comprises two spheres, two sockets in which the spheres are adjustable retain, and a connection link threadly connected at each end to the spheres, to provide a single direction of restraint and to adjust the length or distance between the sockets. Six such adjustable links provide for six degrees of freedom for mounting an instrument on a support. The adjustable link has applications in any machine or instrument requiring precision adjustment in six degrees of freedom, isolation from deformations of the supporting platform, and/or additional structural damping. The damping is accomplished by using a hollow connection link that contains an inner rod and a viscoelastic separation layer between the two.

  9. Micro-inverter solar panel mounting

    DOE Patents [OSTI]

    Morris, John; Gilchrist, Phillip Charles

    2016-02-02

    Processes, systems, devices, and articles of manufacture are provided. Each may include adapting micro-inverters initially configured for frame-mounting to mounting on a frameless solar panel. This securement may include using an adaptive clamp or several adaptive clamps secured to a micro-inverter or its components, and using compressive forces applied directly to the solar panel to secure the adaptive clamp and the components to the solar panel. The clamps can also include compressive spacers and safeties for managing the compressive forces exerted on the solar panels. Friction zones may also be used for managing slipping between the clamp and the solar panel during or after installation. Adjustments to the clamps may be carried out through various means and by changing the physical size of the clamps themselves.

  10. Fixture for mounting small parts for processing

    DOE Patents [OSTI]

    Foreman, L.R.; Gomez, V.M.; Thomas, M.H.

    1990-05-29

    A fixture for mounting small parts, such as fusion target spheres or microelectronic components is disclosed. A glass stalk is drawn and truncated near its tip. The truncated end of the glass stalk is dipped into silicone rubber forming an extending streamer. After the rubber cures for approximately 24 hours, a small part is touched to the streamer, and will be held securely throughout processing. 5 figs.

  11. Conceptual design for PSP mounting bracket

    SciTech Connect (OSTI)

    Ransom, G.; Stein, R.

    1991-12-31

    Protective structural packages (PSP`s or overpacks) used to ship 2 1/2-ton UF{sub 6} product cylinders are bolted to truck trailers. All bolts penetrate two longitudinal rows of wooden planks. Removal and replacement is required at various intervals for maintenance and routine testing. A conceptual design is presented for mounting brackets which would securely attach PSP`s to trailer frames, reduce removal and replacement time, and minimize risk of personnel injury.

  12. City of Mount Dora, Florida (Utility Company) | Open Energy Informatio...

    Open Energy Info (EERE)

    Dora, Florida (Utility Company) Jump to: navigation, search Name: City of Mount Dora Place: Florida Phone Number: (352) 735-7151 Website: ci.mount-dora.fl.usindex.aspx Twitter:...

  13. Mounting apparatus for a nozzle guide vane assembly

    DOE Patents [OSTI]

    Boyd, G.L.; Shaffer, J.E.

    1995-09-12

    The present invention provides a ceramic nozzle guide assembly with an apparatus for mounting it to a metal nozzle case that includes an intermediate ceramic mounting ring. The mounting ring includes a plurality of projections that are received within a plurality of receptacles formed in the nozzle case. The projections of the mounting ring are secured within the receptacles by a ceramic retainer that allows contact between the two components only along arcuate surfaces thus eliminating sliding contact between the components. 8 figs.

  14. Mounting apparatus for a nozzle guide vane assembly

    DOE Patents [OSTI]

    Boyd, Gary L. (Alpine, CA); Shaffer, James E. (Maitland, FL)

    1995-01-01

    The present invention provides a ceramic nozzle guide assembly with an apparatus for mounting it to a metal nozzle case that includes an intermediate ceramic mounting ring. The mounting ring includes a plurality of projections that are received within a plurality of receptacles formed in the nozzle case. The projections of the mounting ring are secured within the receptacles by a ceramic retainer that allows contact between the two components only along arcuate surfaces thus eliminating sliding contact between the components.

  15. Photovoltaic module mounting clip with integral grounding

    DOE Patents [OSTI]

    Lenox, Carl J.

    2008-10-14

    An electrically conductive mounting/grounding clip, for use with a photovoltaic assembly of the type having an electrically conductive frame, comprises an electrically conductive body. The body has a central portion and first and second spaced-apart arms extending generally perpendicular to the central portion. Each arm has an outer portion with each outer portion having an outer end. At least one frame surface-disrupting element is at each outer end. The central portion defines a plane with the frame surface-disrupting elements pointing towards the plane. In some examples each arm extends from the central portion at an acute angle to the plane.

  16. Inter-Comparison and Synergy Between the Two Long-Term Gloval Aerosol Products Derived from AVHRR and TOMS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Inter-Comparison and Synergy Between the Two Long-Term Global Aerosol Products Derived from AVHRR and TOMS M.-J. Jeong and Z. Li Department of Meteorology University of Maryland College Park, Maryland D. A. Chu and S.-C. Tsay National Aeronautics and Space Administration Goddard Flight Center Greenbelt, Maryland Introduction Eighteen years of satellite-based monthly aerosol products have been derived from the advanced very high resolution radiometer (AVHRR) and total ozone mapping experiment

  17. DOE - Office of Legacy Management -- Love Canal - NY 24

    Office of Legacy Management (LM)

    NY.24-1 - DOE MemorandumChecklist; Jones to File; Subject: Elimination - Love Canal; April 30, 1987 NY.24-3 - Report; Smith to Fink; Preliminary Report of New York State Assembly ...

  18. Photovoltaic array mounting apparatus, systems, and methods

    DOE Patents [OSTI]

    West, John Raymond; Atchley, Brian; Hudson, Tyrus Hawkes; Johansen, Emil

    2014-12-02

    An apparatus for mounting a photovoltaic (PV) module on a surface, including a support with an upper surface, a lower surface, tabs, one or more openings, and a clip comprising an arm and a notch, where the apparatus resists wind forces and seismic forces and creates a grounding electrical bond between the PV module, support, and clip. The invention further includes a method for installing PV modules on a surface that includes arranging supports in rows along an X axis and in columns along a Y axis on a surface such that in each row the distance between two neighboring supports does not exceed the length of the longest side of a PV module and in each column the distance between two neighboring supports does not exceed the length of the shortest side of a PV module.

  19. Article mounting and position adjustment stage

    DOE Patents [OSTI]

    Cutburth, Ronald W.; Silva, Leonard L.

    1988-01-01

    An improved adjustment and mounting stage of the type used for the detection of laser beams is disclosed. A ring sensor holder has locating pins on a first side thereof which are positioned within a linear keyway in a surrounding housing for permitting reciprocal movement of the ring along the keyway. A rotatable ring gear is positioned within the housing on the other side of the ring from the linear keyway and includes an oval keyway which drives the ring along the linear keyway upon rotation of the gear. Motor-driven single-stage and dual (x, y) stage adjustment systems are disclosed which are of compact construction and include a large laser transmission hole.

  20. Article mounting and position adjustment stage

    DOE Patents [OSTI]

    Cutburth, R.W.; Silva, L.L.

    1988-05-10

    An improved adjustment and mounting stage of the type used for the detection of laser beams is disclosed. A ring sensor holder has locating pins on a first side thereof which are positioned within a linear keyway in a surrounding housing for permitting reciprocal movement of the ring along the keyway. A rotatable ring gear is positioned within the housing on the other side of the ring from the linear keyway and includes an oval keyway which drives the ring along the linear keyway upon rotation of the gear. Motor-driven single-stage and dual (x, y) stage adjustment systems are disclosed which are of compact construction and include a large laser transmission hole. 6 figs.

  1. Rack assembly for mounting solar modules

    DOE Patents [OSTI]

    Plaisted, Joshua Reed; West, Brian

    2012-09-04

    A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures to be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

  2. Rack assembly for mounting solar modules

    DOE Patents [OSTI]

    Plaisted, Joshua Reed; West, Brian

    2014-06-10

    A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures o be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

  3. Rack assembly for mounting solar modules

    DOE Patents [OSTI]

    Plaisted, Joshua Reed; West, Brian

    2010-12-28

    A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures o be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

  4. Environmental evaluation of Surface Mounted Devices (SMD)

    SciTech Connect (OSTI)

    Barr, V.C.; Andrade, A.D.

    1997-06-01

    We evaluated the comparative reliability of solder interconnections used for Leadless Chip Carriers (LCCs), Meaded, and flat-pack hybrid microcircuits mounted on FR-4 glass epoxy printed wiring boards (PWBs). The board assemblies, with solder attached microcircuits, were repeatedly thermal cycled from - 65 to +125{degrees}C. We recognize that this temperature range far exceeds most testing of assemblies. The purposes of these tests were to evaluate worst-case conditions and to obtain comparative information. Identical PWB assemblies, using these three component types, were subjected to both thermal shock testing (1 cycle every 42 minutes) and temperature cycle testing (1 cycle every 3 hours). The double testing evaluated the differences in stress application and evaluated the potential of replacing slow transition, expensive temperature cycle testing (which has been an industry standard for years) with the much more rapid thermal shock testing.

  5. Reusable vibration resistant integrated circuit mounting socket

    DOE Patents [OSTI]

    Evans, Craig N.

    1995-01-01

    This invention discloses a novel form of socket for integrated circuits to be mounted on printed circuit boards. The socket uses a novel contact which is fabricated out of a bimetallic strip with a shape which makes the end of the strip move laterally as temperature changes. The end of the strip forms a barb which digs into an integrated circuit lead at normal temperatures and holds it firmly in the contact, preventing loosening and open circuits from vibration. By cooling the contact containing the bimetallic strip the barb end can be made to release so that the integrated circuit lead can be removed from the socket without damage either to the lead or to the socket components.

  6. Purchasing Energy-Efficient Ceiling-Mounted Fluorescent Luminaires |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Ceiling-Mounted Fluorescent Luminaires Purchasing Energy-Efficient Ceiling-Mounted Fluorescent Luminaires The Federal Energy Management Program (FEMP) provides acquisition guidance for ceiling-mounted fluorescent luminaires, a product category covered by FEMP efficiency requirements. Federal laws and requirements mandate that agencies purchase ENERGY STAR-qualified or FEMP-designated products in all product categories covered by these programs and in any acquisition

  7. Mount Morris, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    district.12 Registered Energy Companies in Mount Morris, New York Energy Enterprises Inc Western NY Energy LLC References US Census Bureau Incorporated place and...

  8. Mount Vernon, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Registered Energy Companies in Mount Vernon, Ohio Blight-to-Bright Replex Plastics References US Census Bureau Incorporated place and minor civil division...

  9. City of Mount Hope, Kansas (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    Kansas (Utility Company) Jump to: navigation, search Name: Mount Hope City of Place: Kansas Phone Number: (316) 661-2211 Website: www.mounthopecity.comdefault. Facebook: https:...

  10. Mount Wachusetts Community College Wind Project | Open Energy...

    Open Energy Info (EERE)

    Community College Energy Purchaser Mount Wachusetts Community College Location Gardner MA Coordinates 42.58855651, -71.98396683 Show Map Loading map......

  11. Cummins Rocky Mount Engine Plant | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    experience with achieving certification to Superior Energy Performance (SEP(tm)) and ISO 50001. PDF icon Cummins Rocky Mount Engine Plant (September 2015) More Documents & ...

  12. Mount Vernon, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Mount Vernon, New York: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 40.9125992, -73.8370786 Show Map Loading map... "minzoom":false,"mappin...

  13. Direct Probe Mounted High-Performance Amplifiers for Pulsed Measuremen...

    Office of Scientific and Technical Information (OSTI)

    Direct Probe Mounted High-Performance Amplifiers for Pulsed Measurement Citation Details ... Visit OSTI to utilize additional information resources in energy science and technology. A ...

  14. Direct Probe Mounted High-Performance Amplifiers for Pulsed Measuremen...

    Office of Scientific and Technical Information (OSTI)

    Direct Probe Mounted High-Performance Amplifiers for Pulsed Measurement Citation Details ... Country of Publication: United States Language: English Subject: Materials Science(36) ...

  15. Mount Kisco, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    congressional district.12 Registered Energy Companies in Mount Kisco, New York Curtis Instruments Curtis Instruments Inc References US Census Bureau Incorporated place...

  16. Electro-optic component mounting device

    DOE Patents [OSTI]

    Gruchalla, M.E.

    1994-09-13

    A technique is provided for integrally mounting a device such as an electro-optic device in a transmission line to avoid series resonant effects. A center conductor of the transmission line has an aperture formed therein for receiving the device. The aperture splits the center conductor into two parallel sections on opposite sides of the device. For a waveguide application, the center conductor is surrounded by a conductive ground surface which is spaced apart from the center conductor with a dielectric material. One set of electrodes formed on the surface of the electro-optic device is directly connected to the center conductor and an electrode formed on the surface of the electro-optic device is directly connected to the conductive ground surface. The electrodes formed on the surface of the electro-optic device are formed on curved sections of the surface of the device to mate with correspondingly shaped electrodes on the conductor and ground surface to provide a uniform electric field across the electro-optic device. The center conductor includes a passage formed therein for passage of optical signals to an electro-optic device. 10 figs.

  17. Virtual sine arm kinematic mount system

    SciTech Connect (OSTI)

    Xu, Z.; Randall, K.J.

    1997-09-01

    A novel kinematic mount system for a vertical focusing mirror of the soft x-ray spectroscopy beamline at the Advanced Photon Source is described. The system contains three points in a horizontal plane. Each point consists of two horizontal linear precision stages, a spherical ball bearing, and a vertical precision stage. The horizontal linear stages are aligned orthogonally and are conjoined by a spherical ball bearing, supported by the vertical linear stage at each point. The position of each confined horizontal stage is controlled by a motorized micrometer head by spring-loading the flat tip of the micrometer head onto a tooling ball fixing on the carriage of the stage. A virtual sine arm is formed by tilting the upstream horizontal stage down and the two downstream horizontal stages up by a small angle. The fine pitch motion is achieved by adjusting the upstream stage. This supporting structure is extremely steady due to a relatively large span across the supporting points and yields extremely high resolution on the pitch motion. With a one degree tilt and a microstepping motor, the authors achieved a 0.4 nanoradian resolution on the mirror pitch motion.

  18. Electro-optic component mounting device

    DOE Patents [OSTI]

    Gruchalla, Michael E.

    1994-01-01

    A technique is provided for integrally mounting a device such as an electro-optic device (50) in a transmission line to avoid series resonant effects. A center conductor (52) of the transmission line has an aperture (58) formed therein for receiving the device (50). The aperture (58) splits the center conductor into two parallel sections on opposite sides of the device. For a waveguide application, the center conductor is surrounded by a conductive ground surface (54), which is spaced apart from the center conductor with a dielectric material (56). One set of electrodes formed on the surface of the electro-optic device (50) is directly connected to the center conductor 52 and an electrode formed on the surface of the electro-optic device is directly connected to the conductive ground surface (54). The electrodes formed on the surface of the electro-optic device are formed on curved sections of the surface of the device to mate with correspondingly shaped electrodes on the conductor and ground surface to provide a uniform electric field across the electro-optic device. The center conductor includes a passage ( 60) formed therein for passage of optical signals to an electro-optic device.

  19. Hole-thru-laminate mounting supports for photovoltaic modules

    DOE Patents [OSTI]

    Wexler, Jason; Botkin, Jonathan; Culligan, Matthew; Detrick, Adam

    2015-02-17

    A mounting support for a photovoltaic module is described. The mounting support includes a pedestal having a surface adaptable to receive a flat side of a photovoltaic module laminate. A hole is disposed in the pedestal, the hole adaptable to receive a bolt or a pin used to couple the pedestal to the flat side of the photovoltaic module laminate.

  20. Laser housing having integral mounts and method of manufacturing same

    DOE Patents [OSTI]

    Herron, Michael Alan; Brickeen, Brian Keith

    2004-10-19

    A housing adapted to position, support, and facilitate aligning various components, including an optical path assembly, of a laser. In a preferred embodiment, the housing is constructed from a single piece of material and broadly comprises one or more through-holes; one or more cavities; and one or more integral mounts, wherein the through-holes and the cavities cooperate to define the integral mounts. Securement holes machined into the integral mounts facilitate securing components within the integral mounts using set screws, adhesive, or a combination thereof. In a preferred method of making the housing, the through-holes and cavities are first machined into the single piece of material, with at least some of the remaining material forming the integral mounts.

  1. Hydrokinetic canal measurements: inflow velocity, wake flow velocity, and turbulence

    SciTech Connect (OSTI)

    Gunawan, Budi

    2014-06-11

    The dataset consist of acoustic Doppler current profiler (ADCP) velocity measurements in the wake of a 3-meter diameter vertical-axis hydrokinetic turbine deployed in Roza Canal, Yakima, WA, USA. A normalized hub-centerline wake velocity profile and two cross-section velocity contours, 10 meters and 20 meters downstream of the turbine, are presented. Mean velocities and turbulence data, measured using acoustic Doppler velocimeter (ADV) at 50 meters upstream of the turbine, are also presented. Canal dimensions and hydraulic properties, and turbine-related information are also included.

  2. GROUT TEMPERATURE MEASUREMENTS IN 105-R DISASSEMBLY BASIN D AND E CANAL

    SciTech Connect (OSTI)

    Fogle, R.; Collins, M.; Guerrero, H.

    2010-06-03

    Cementitious Materials Laboratory Test Plan (SRNL-TR-2009-00175) to establish grout mix maturation indices for this relationship. Temperature data collected from the D&E grout placement will be evaluated against these maturation indices in a subsequent analysis. Grout temperature data outside the maturation indices highlight the opportunity to adjust the grout mix design for future placements. The pre-existing grout placement will not be removed since this material will comply with strength requirements under the normal curing duration. SRNL designed a standalone measurement system to collect grout mass placement temperature data in the D&E Canal. Four vertical poles instrumented with thermocouples were positioned in the canal prior to grout placement. The thermocouples were connected to stand-alone, battery-powered data recorders mounted nearby that were configured to take temperature recordings every 10 minutes for up to 100 days. Unfortunately, after just 2 weeks, data collection was terminated because the thermocouple wires connecting the data loggers to the thermocouple poles were severed during construction activities. This report will highlight the unique challenges in designing a data collection system for the D&E canal, describe the temperature measurement system and its installation, and present calculated as well as measured temperature values.

  3. Methods and apparatus for radially compliant component mounting

    DOE Patents [OSTI]

    Bulman, David Edward (Cincinnati, OH); Darkins, Jr., Toby George (Loveland, OH); Stumpf, James Anthony (Columbus, IN); Schroder, Mark S. (Greenville, SC); Lipinski, John Joseph (Simpsonville, SC)

    2012-03-27

    Methods and apparatus for a mounting assembly for a liner of a gas turbine engine combustor are provided. The combustor includes a combustor liner and a radially outer annular flow sleeve. The mounting assembly includes an inner ring surrounding a radially outer surface of the liner and including a plurality of axially extending fingers. The mounting assembly also includes a radially outer ring coupled to the inner ring through a plurality of spacers that extend radially from a radially outer surface of the inner ring to the outer ring.

  4. Spring Mount, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Spring Mount is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  5. The Mount Princeton geothermal area, Chaffee County, Colorado...

    Open Energy Info (EERE)

    Book Section: The Mount Princeton geothermal area, Chaffee County, Colorado Authors H.J. Olson and F. Dellechaie Editors Epis, R.C. & Weimer and R.I. Published Colorado School...

  6. Casa de Oro-Mount Helix, California: Energy Resources | Open...

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Casa de Oro-Mount Helix is a census-designated place in San Diego County, California.1...

  7. A unique gun application for both high velocity and low velocity projectiles in a standard 155mm long tom gun

    SciTech Connect (OSTI)

    Garcia, J.R.

    1990-01-01

    The Terminal Ballistics Facility at Sandia National Laboratores in Albuquerque, New Mexico has developed an inexpensive and reliable capability for environmental testing of nuclear and kinetic energy weapon systems using the standard military 155 mm long tom gun. An unusual priming technique and charge configuration developed by Sandia National laboratories provides repeatable results such that payloads may be launched outside of the normal operating regime (both high and low) for the 155 mm gun. A 15 pound payload was reliably launched at 1000 fps with a breech pressure of 3000 psi. Another 20 pound payload was reliably launched to 5000 fps with a breech pressure of 50000 psi. A detailed description of charge configuration and test results is presented. 21 figs., 4 tabs.

  8. Habdank PV Montagesysteme GmbH Co KG Habdank PV Mounting Systems...

    Open Energy Info (EERE)

    Germany Zip: 73037 Product: Germany-based manufacturer of mounting systems for PV installations. References: Habdank PV-Montagesysteme GmbH & Co KG Habdank PV Mounting...

  9. Integrated fiducial sample mount and software for correlated microscopy

    SciTech Connect (OSTI)

    Timothy R McJunkin; Jill R. Scott; Tammy L. Trowbridge; Karen E. Wright

    2014-02-01

    A novel design sample mount with integrated fiducials and software for assisting operators in easily and efficiently locating points of interest established in previous analytical sessions is described. The sample holder and software were evaluated with experiments to demonstrate the utility and ease of finding the same points of interest in two different microscopy instruments. Also, numerical analysis of expected errors in determining the same position with errors unbiased by a human operator was performed. Based on the results, issues related to acquiring reproducibility and best practices for using the sample mount and software were identified. Overall, the sample mount methodology allows data to be efficiently and easily collected on different instruments for the same sample location.

  10. Piezoelectric resonator assembly with thin molybdenum mounting clips

    DOE Patents [OSTI]

    Peters, R. Donald

    1981-01-01

    A resonator mounting assembly wherein the resonator blank is mounted agai an essentially planar surface presented by a plurality of peripherally disposed mounting clips and bonded to this surface to provide substantially all the mechanical support for the blank in a direction normal to the major faces of the resonator blank, while being flexible in the directions parallel to said major faces so as to minimize radial stresses on the resonator blank, particularly during thermal cycling of the resonator assembly. The clips are fabricated of a low thermal expansion material, such as molybdenum, which also has considerable yield strength after exposure to processing temperatures; the bonding of the clips to the edges of the resonator blank can be achieved by a polyimide containing electrically conductive particles.

  11. Rolling contact mounting arrangement for a ceramic combustor

    DOE Patents [OSTI]

    Boyd, Gary L. (328 Sneath Way, Alpine, CA 91901); Shaffer, James E. (1780 Geronimo Tr., Maitland, FL 32751)

    1995-01-01

    A combustor assembly having a preestablished rate of thermal expansion is mounted within a gas turbine engine housing having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the combustor assembly. The combustor assembly is constructed of a inlet end portion, a outlet end portion and a plurality of combustor ring segments positioned between the end portions. A mounting assembly is positioned between the combustor assembly and the gas turbine engine housing to allow for the difference in the rate of thermal expansion while maintaining axially compressive force on the combustor assembly to maintain contact between the separate components.

  12. Rolling contact mounting arrangement for a ceramic combustor

    DOE Patents [OSTI]

    Boyd, G.L.; Shaffer, J.E.

    1995-10-17

    A combustor assembly having a preestablished rate of thermal expansion is mounted within a gas turbine engine housing having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the combustor assembly. The combustor assembly is constructed of a inlet end portion, a outlet end portion and a plurality of combustor ring segments positioned between the end portions. A mounting assembly is positioned between the combustor assembly and the gas turbine engine housing to allow for the difference in the rate of thermal expansion while maintaining axially compressive force on the combustor assembly to maintain contact between the separate components. 3 figs.

  13. Sabah barge-mounted power plant in service

    SciTech Connect (OSTI)

    Barker, T.

    1995-03-01

    The world`s largest barge-mounted simple-cycle power plant, constructed by the Sabah Shipyards in Malaysia, is now in service in the Philippines. Construction of similar barges from Westinghouse should begin shortly. This paper discusses in brief the projects in progress at present and prospects in the Asian market from the perspective of the manufacturers.

  14. Systems and methods for biometric identification using the acoustic properties of the ear canal

    DOE Patents [OSTI]

    Bouchard, A.M.; Osbourn, G.C.

    1998-07-28

    The present invention teaches systems and methods for verifying or recognizing a person`s identity based on measurements of the acoustic response of the individual`s ear canal. The system comprises an acoustic emission device, which emits an acoustic source signal s(t), designated by a computer, into the ear canal of an individual, and an acoustic response detection device, which detects the acoustic response signal f(t). A computer digitizes the response (detected) signal f(t) and stores the data. Computer-implemented algorithms analyze the response signal f(t) to produce ear-canal feature data. The ear-canal feature data obtained during enrollment is stored on the computer, or some other recording medium, to compare the enrollment data with ear-canal feature data produced in a subsequent access attempt, to determine if the individual has previously been enrolled. The system can also be adapted for remote access applications. 5 figs.

  15. Systems and methods for biometric identification using the acoustic properties of the ear canal

    DOE Patents [OSTI]

    Bouchard, Ann Marie; Osbourn, Gordon Cecil

    1998-01-01

    The present invention teaches systems and methods for verifying or recognizing a person's identity based on measurements of the acoustic response of the individual's ear canal. The system comprises an acoustic emission device, which emits an acoustic source signal s(t), designated by a computer, into the ear canal of an individual, and an acoustic response detection device, which detects the acoustic response signal f(t). A computer digitizes the response (detected) signal f(t) and stores the data. Computer-implemented algorithms analyze the response signal f(t) to produce ear-canal feature data. The ear-canal feature data obtained during enrollment is stored on the computer, or some other recording medium, to compare the enrollment data with ear-canal feature data produced in a subsequent access attempt, to determine if the individual has previously been enrolled. The system can also be adapted for remote access applications.

  16. Apparatus for mounting photovoltaic power generating systems on buildings

    DOE Patents [OSTI]

    Russell, Miles C.

    2009-08-18

    Rectangular photovoltaic (PV) modules are mounted on a building roof by mounting stands that are distributed in rows and columns. Each stand comprises a base plate and first and second different height brackets attached to opposite ends of the base plate. Each first and second bracket comprises two module-support members. One end of each module is pivotally attached to and supported by a first module-support member of a first bracket and a second module-support member of another first bracket. At its other end each module rests on but is connected by flexible tethers to module-support members of two different second brackets. The tethers are sized to allow the modules to pivot up away from the module-support members on which they rest to a substantially horizontal position in response to wind uplift forces.

  17. Test probe for surface mounted leadless chip carrier

    DOE Patents [OSTI]

    Meyer, Kerry L.; Topolewski, John

    1989-05-23

    A test probe for a surface mounted leadless chip carrier is disclosed. The probed includes specially designed connector pins which allow size reductions in the probe. A thermoplastic housing provides spring action to ensure good mechanical and electrical contact between the pins and the contact strips of a leadless chip carrier. Other features include flexible wires molded into the housing and two different types of pins alternately placed in the housing. These features allow fabrication of a smaller and simpler test probe.

  18. Electrical wiring box with structure for fast device mounting

    DOE Patents [OSTI]

    Johnston, Earl S.

    1991-01-08

    An electrical wiring box of molded insulating material is provided with bosses having screw holes for receiving a mounting screw that include two colinear portions of which a first portion proximate the front surface has an internal configuration, such as molded threads, that engage the mounting screw while permitting the mounting screw to be manually inserted therethrough without turning because of flexibility built into the boss structure. A second portion of the screw hole is of greater restriction for securely engaging the screw such as by self tapping. The flexibility of the boss is provided by a first center slot that extends from the screw hole to the boss exterior over a length substantially equal to the first portion of the screw hole. Second and third slots are located respectively on each side of the screw hole and provide projections respectively between the first and second slots and the first and third slots that flex to allow easy screw insertion through the first portion of the screw hole.

  19. V-227: VMware Workstation and Player vmware-mount Command Flaw...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Workstation and Player vmware-mount Command Flaw Lets Local Users Gain Root Privileges V-227: VMware Workstation and Player vmware-mount Command Flaw Lets Local Users Gain Root...

  20. Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project Scoping and Feasibility Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project Scoping and Feasibility ...

  1. The Cummins Rocky Mount Engine Plant Case Study | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Assistance » Superior Energy Performance » The Cummins Rocky Mount Engine Plant Case Study The Cummins Rocky Mount Engine Plant Case Study sep_logo_borderless.jpg The Cummins Rocky Mount Engine Plant (RMEP) in Rocky Mount, North Carolina is saving over $700,000 annually and achieved a 12.6% energy performance improvement after implementing SEP. (July 2015) Cummins' Case Study for Superior Energy Performance (2.43 MB) More Documents & Publications SEP Case Study Webinar: Cummins

  2. ARM - Instrument - toms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users of these data should acknowledge the support of the NASA Goddard Ozone Processing Team. Similar data may also be found from the Ozone Monitoring Instrument (OMI). Output ...

  3. ARM - Campaign Instrument - toms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govInstrumentstoms

  4. 3001 canal radiological characterization and waste removal report, Oak Ridge National Laboratory, Oak Ridge, Tennessee

    SciTech Connect (OSTI)

    Ritchie, M.G.

    1996-12-01

    An underground steel reinforced concrete transfer and storage canal was built in 1943 and operated as an integral part of the Oak Ridge Graphite Reactor Building (3001) until 1963 when the reactor was shutdown. During operation, the canal was used for under water transfer of irradiated materials and other metals from the reactor in Building 3001 to the Building 3019 hot cell for further processing. After shutdown of the reactor, the canal was used for storage of irradiated materials and fission products until 1990 when the larger materials were removed and stored in the Department of Energy (DOE) approved solid waste management storage facilities. At that time it was discovered that a considerable amount of sludge had accumulated over the intervening years and subsequent analysis showed that the sludge contained Resource Conservation and Recovery Act (RCRA) materials that violated quantities allowed by the RCRA regulations. It was also recognized in 1990 that the canal was losing water to evaporation and the ground at the rate of approximately 400 gallons per day. To maintain water quality; i.e., radionuclide content at or near DOE derived concentration guidelines (DCG), the water in the canal is constantly demineralized using a demineralizer in the Building 3001 and demineralized make up water is supplied from the Building 3004 demineralizer. This report summarizes the 301 Canal Cleanup Task and the solid waste removed from the 3001 Canal in 1996.

  5. Risk-Based Disposal Plan for PCB Paint in the TRA Fluorinel Dissolution Process Mockup and Gamma Facilities Canal

    SciTech Connect (OSTI)

    R. A. Montgomery

    2008-05-01

    This Toxic Substances Control Act Risk-Based Polychlorinated Biphenyl Disposal plan was developed for the Test Reactor Area Fluorinel Dissolution Process Mockup and Gamma Facilities Waste System, located in Building TRA-641 at the Reactor Technology Complex, Idaho National Laboratory Site, to address painted surfaces in the empty canal under 40 CFR 761.62(c) for paint, and under 40 CFR 761.61(c) for PCBs that may have penetrated into the concrete. The canal walls and floor will be painted with two coats of contrasting non-PCB paint and labeled as PCB. The canal is covered with open decking; the access grate is locked shut and signed to indicate PCB contamination in the canal. Access to the canal will require facility manager permission. Protective equipment for personnel and equipment entering the canal will be required. Waste from the canal, generated during ultimate Decontamination and Decommissioning, shall be managed and disposed as PCB Bulk Product Waste.

  6. Test probe for surface mounted leadless chip carrier

    DOE Patents [OSTI]

    Meyer, K.L.; Topolewski, J.

    1987-10-02

    A test probe for a surface mounted leadless chip carrier is disclosed. The probe includes specially designed connector pins which allow size reductions in the probe. A thermoplastic housing provides spring action to ensure good mechanical and electrical contact between the pins and the contact strips of a leadless chip carrier. Other features include flexible wires molded into the housing and two different types of pins alternately placed in the housing. These features allow fabrication of a smaller and simpler test probe. 1 fig.

  7. Apparatus for mounting a diode in a microwave circuit

    DOE Patents [OSTI]

    Liu, Shing-gong

    1976-07-27

    Apparatus for mounting a diode in a microwave circuit for making electrical contact between the circuit and ground and for dissipation of heat between the diode and a heat sink. The diode, supported on a thermally and electrically conductive member, is resiliently pressed in electrical contact with the microwave circuit. A tapered collar on the member is elastically deformably wedged into a tapered aperture formed in a heat sink. The wedged collar tightens firmly around the member establishing good thermal and electrical conduction from the diode to the heat sink and ground. Disassembly is facilitated because of the elastically deformed collar.

  8. Thermoelectric generator having a resiliently mounted removable thermoelectric module

    DOE Patents [OSTI]

    Purdy, David L.; Shapiro, Zalman M.; Hursen, Thomas F.; Maurer, Gerould W.

    1976-11-02

    An electrical generator having an Isotopic Heat Capsule including radioactive fuel rod 21 as a primary heat source and Thermoelectric Modules 41 and 43 as converters. The Biological Shield for the Capsule is suspended from Spiders at each end each consisting of pretensioned rods 237 and 239 defining planes at right angles to each other. The Modules are mounted in cups 171 of transition members 173 of a heat rejection Fin Assembly whose fins 195 and 197 extend from both sides of the transition member 173 for effective cooling.

  9. Sensor 17 Thermal Isolation Mounting Structure (TIMS) Design Improvements

    SciTech Connect (OSTI)

    Enstrom, K.

    2015-09-04

    The SENSOR 17 thermographic camera weighs approximately 0.5lbs, has a fundamental mode of 167 Hz, and experiences 0.75W of heat leakage in through the TIMS. The configuration, shown in Figure 1, is comprised of four 300 Series SST washers paired in tandem with P.E.I (Ultem 100) washers. The SENSOR 17 sensor is mounted to a 300 series stainless plate with A-shaped arms. The Plate can be assumed to be at ambient temperatures (≈293K) and the I.R. Mount needs to be cooled to 45K. It is attached to the tip of a cryocooler by a ‘cold strap’ and is assumed to be at the temperature of the cold-strap (≈45K). During flights SENSOR 17 experiences excitations at frequencies centered around 10-30Hz, 60Hz, and 120Hz from the aircraft flight environment. The temporal progression described below depicts the 1st Modal shape at the systems resonant frequency. This simulation indicates Modal articulation will cause a pitch rate of the camera with respect to the body axis of the airplane. This articulation shows up as flutter in the camera.

  10. System and method for reproducibly mounting an optical element

    DOE Patents [OSTI]

    Eisenbies, Stephen; Haney, Steven

    2005-05-31

    The present invention provides a two-piece apparatus for holding and aligning the MEMS deformable mirror. The two-piece apparatus comprises a holding plate for fixedly holding an adaptive optics element in an overall optical system and a base spatially fixed with respect to the optical system and adapted for mounting and containing the holding plate. The invention further relates to a means for configuring the holding plate through adjustments to each of a number of off-set pads touching each of three orthogonal plane surfaces on the base, wherein through the adjustments the orientation of the holding plate, and the adaptive optics element attached thereto, can be aligned with respect to the optical system with six degrees of freedom when aligning the plane surface of the optical element. The mounting system thus described also enables an operator to repeatedly remove and restore the adaptive element in the optical system without the need to realign the system once that element has been aligned.

  11. EIS-0398: Delta-Mendota Canal/California Aqueduct Intertie (DCI) Project

    Broader source: Energy.gov [DOE]

    This EIS analyzes WAPA's decision to authorize a new interconnection and design, construct, operate, and maintain a new 69-kilovolt transmission line as part of the Delta-Mendota Canal Intertie Project.

  12. Direct mounted photovoltaic device with improved adhesion and method thereof

    DOE Patents [OSTI]

    Boven, Michelle L; Keenihan, James R; Lickly, Stan; Brown, Jr., Claude; Cleereman, Robert J; Plum, Timothy C

    2014-12-23

    The present invention is premised upon a photovoltaic device suitable for directly mounting on a structure. The device includes an active portion including a photovoltaic cell assembly having a top surface portion that allows transmission of light energy to a photoactive portion of the photovoltaic device for conversion into electrical energy and a bottom surface having a bottom bonding zone; and an inactive portion immediately adjacent to and connected to the active portion, the inactive portion having a region for receiving a fastener to connect the device to the structure and having on a top surface, a top bonding zone; wherein one of the top and bottom bonding zones comprises a first bonding element and the other comprises a second bonding element, the second bonding element designed to interact with the first bonding element on a vertically overlapped adjacent photovoltaic device to bond the device to such adjacent device or to the structure.

  13. Adapter plate assembly for adjustable mounting of objects

    DOE Patents [OSTI]

    Blackburn, Robert S.

    1987-01-01

    An adapter plate and two locking discs are together affixed to an optic table with machine screws or bolts threaded into a fixed array of internally threaded holes provided in the table surface. The adapter plate preferably has two, and preferably parallel, elongated locating slots each freely receiving a portion of one of the locking discs for secure affixation of the adapter plate to the optic table. A plurality of threaded apertures provided in the adapter plate are available to attach optical mounts or other devices onto the adapter plate in an orientation not limited by the disposition of the array of threaded holes in the table surface. An axially aligned but radially offset hole through each locking disc receives a screw that tightens onto the table, such that prior to tightening of the screw the locking disc may rotate and translate within each locating slot of the adapter plate for maximum flexibility of the orientation thereof.

  14. Flush-mounted probe diagnostics for argon glow discharge plasma

    SciTech Connect (OSTI)

    Xu, Liang Cao, Jinxiang; Liu, Yu; Wang, Jian; Du, Yinchang; Zheng, Zhe; Zhang, Xiao; Wang, Pi; Zhang, Jin; Li, Xiao; Qin, Yongqiang; Zhao, Liang

    2014-09-15

    A comparison is made between plasma parameters measured by a flush-mounted probe (FP) and a cylindrical probe (CP) in argon glow discharge plasma. Parameters compared include the space potential, the plasma density, and the effective electron temperature. It is found that the ion density determined by the FP agrees well with the electron density determined by the CP in the quasi-neutral plasma to better than 10%. Moreover, the space potential and effective electron temperature calculated from electron energy distribution function measured by the FP is consistent with that measured by the CP over the operated discharge current and pressure ranges. These results present the FP can be used as a reliable diagnostic tool in the stable laboratory plasma and also be anticipated to be applied in other complicated plasmas, such as tokamaks, the region of boundary-layer, and so on.

  15. Adapter plate assembly for adjustable mounting of objects

    DOE Patents [OSTI]

    Blackburn, R.S.

    1986-05-02

    An adapter plate and two locking discs are together affixed to an optic table with machine screws or bolts threaded into a fixed array of internally threaded holes provided in the table surface. The adapter plate preferably has two, and preferably parallel, elongated locating slots each freely receiving a portion of one of the locking discs for secure affixation of the adapter plate to the optic table. A plurality of threaded apertures provided in the adapter plate are available to attach optical mounts or other devices onto the adapter plate in an orientation not limited by the disposition of the array of threaded holes in the table surface. An axially aligned but radially offset hole through each locking disc receives a screw that tightens onto the table, such that prior to tightening of the screw the locking disc may rotate and translate within each locating slot of the adapter plate for maximum flexibility of the orientation thereof.

  16. Regenerative braking device with rotationally mounted energy storage means

    DOE Patents [OSTI]

    Hoppie, Lyle O.

    1982-03-16

    A regenerative braking device for an automotive vehicle includes an energy storage assembly (12) having a plurality of rubber rollers (26, 28) mounted for rotation between an input shaft (30) and an output shaft (32), clutches (50, 56) and brakes (52, 58) associated with each shaft, and a continuously variable transmission (22) connectable to a vehicle drivetrain and to the input and output shafts by the respective clutches. In a second embodiment the clutches and brakes are dispensed with and the variable ratio transmission is connected directly across the input and output shafts. In both embodiments the rubber rollers are torsionally stressed to accumulate energy from the vehicle when the input shaft rotates faster or relative to the output shaft and are torsionally relaxed to deliver energy to the vehicle when the output shaft rotates faster or relative to the input shaft.

  17. Performance Comparison of a BIPV Roofing Tile System in Two Mounting Configurations (Poster)

    SciTech Connect (OSTI)

    Muller, M.; Rodriquez, J.; Marion, B.

    2009-06-01

    This work examined the thermal and power characteristics of a building-integrated photovoltaic (BIPV) roofing system using two installation techniques, counter-batten and direct-mount.

  18. Performance Comparison of a BIPV Roofing Tile System in Two Mounting Configurations: Preprint

    SciTech Connect (OSTI)

    Muller, M. T.; Rodrigeuz, J.; Marion, B.

    2009-06-01

    This work examined the thermal and power characteristics of a building-integrated photovoltaic (BIPV) roofing system using two installation techniques, counter-batten and direct-mount.

  19. Yieldably mounted lubricant control assemblies for piston rods

    SciTech Connect (OSTI)

    Meijer, R.J.; Ziph, B. Godett, T.M.

    1986-04-01

    This patent describes an engine having a housing comprising a cylinder within which a piston reciprocates and a piston rod extending from the piston through a bore which extends in the housing from the cylinder to a crankcase and a lubricant control assembly which is disposed within the bore in cooperative arrangement with the piston rod and functions to separate the cylinder from the crankcase while allowing the piston rod to reciprocate axially through a lubricant control portion of the lubricant control assembly which is in forceful contact around the piston rod, the improvement which comprises a compliant housing for mounting the lubricant control assembly on the engine housing. The compliant housing is operatively disposed between the engine housing and the lubricant control portion to allow the lubricant control portion to be radially displaced with respect to the bore and thereby comply with radial displacement of the reciprocating piston rod while maintaining substantially full effectiveness of the lubricant control portion acting on the piston rod. The lubricant control assembly consists of a tubular part, means attaching the tubular part to the compliant housing such that the tubular part can comply with radial displacement of the reciprocating piston rod, and force-applying means acting between the tubular part and the lubricant control portion for urging the lubricant control portion into forceful contact around the reciprocating piston rod.

  20. Integrated crystal mounting and alignment system for high-throughput biological crystallography

    DOE Patents [OSTI]

    Nordmeyer, Robert A.; Snell, Gyorgy P.; Cornell, Earl W.; Kolbe, William; Yegian, Derek; Earnest, Thomas N.; Jaklevic, Joseph M.; Cork, Carl W.; Santarsiero, Bernard D.; Stevens, Raymond C.

    2005-07-19

    A method and apparatus for the transportation, remote and unattended mounting, and visual alignment and monitoring of protein crystals for synchrotron generated x-ray diffraction analysis. The protein samples are maintained at liquid nitrogen temperatures at all times: during shipment, before mounting, mounting, alignment, data acquisition and following removal. The samples must additionally be stably aligned to within a few microns at a point in space. The ability to accurately perform these tasks remotely and automatically leads to a significant increase in sample throughput and reliability for high-volume protein characterization efforts. Since the protein samples are placed in a shipping-compatible layered stack of sample cassettes each holding many samples, a large number of samples can be shipped in a single cryogenic shipping container.

  1. Integrated crystal mounting and alignment system for high-throughput biological crystallography

    DOE Patents [OSTI]

    Nordmeyer, Robert A.; Snell, Gyorgy P.; Cornell, Earl W.; Kolbe, William F.; Yegian, Derek T.; Earnest, Thomas N.; Jaklevich, Joseph M.; Cork, Carl W.; Santarsiero, Bernard D.; Stevens, Raymond C.

    2007-09-25

    A method and apparatus for the transportation, remote and unattended mounting, and visual alignment and monitoring of protein crystals for synchrotron generated x-ray diffraction analysis. The protein samples are maintained at liquid nitrogen temperatures at all times: during shipment, before mounting, mounting, alignment, data acquisition and following removal. The samples must additionally be stably aligned to within a few microns at a point in space. The ability to accurately perform these tasks remotely and automatically leads to a significant increase in sample throughput and reliability for high-volume protein characterization efforts. Since the protein samples are placed in a shipping-compatible layered stack of sample cassettes each holding many samples, a large number of samples can be shipped in a single cryogenic shipping container.

  2. Faces of Science: Tom Vestrand

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    August, 23 2016 - From shoring up floors to building a brand-new home in southern Africa, Laura McClellan spends much of her free time helping people in extreme poverty. Melissa ...

  3. Tom Stephens | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transportation Systems Analyst E-mail tstephens@anl.gov Projects HTEBdyn Heavy Truck Energy Balance Dynamic Model Heavy Truck Benefits Analysis Models Heavy Vehicle...

  4. Test plan/procedure for the shock limiting device of the radioisotope thermoelectric generator package mounting subsystem 145. Revision 1

    SciTech Connect (OSTI)

    Satoh, J.A.

    1995-05-25

    This document defines the procedure to be used in the 18 inch drop test to be used for design verification of the RTG Transportation System Package Mounting.

  5. Cascaded die mountings with spring-loaded contact-bond options

    DOE Patents [OSTI]

    Hsu, John S.; Adams, Donald J.; Su, Gui-Jia; Marlino, Laura D.; Ayers, Curtis W.; Coomer, Chester

    2005-08-16

    A cascaded die mounting device and method using spring contacts for die attachment, with or without metallic bonds between the contacts and the dies, is disclosed. One embodiment is for the direct refrigerant cooling of an inverter/converter carrying higher power levels than most of the low power circuits previously taught, and does not require using a heat sink.

  6. Method of making cascaded die mountings with springs-loaded contact-bond options

    DOE Patents [OSTI]

    Hsu, John S.; Adams, Donald J.; Su, Gui-Jia; Marlino, Laura D.; Ayers, Curtis W.; Coomer, Chester

    2007-06-19

    A cascaded die mounting device and method using spring contacts for die attachment, with or without metallic bonds between the contacts and the dies, is disclosed. One embodiment is for the direct refrigerant cooling of an inverter/converter carrying higher power levels than most of the low power circuits previously taught, and does not require using a heat sink.

  7. Apparatus and method for mounting photovoltaic power generating systems on buildings

    DOE Patents [OSTI]

    Russell, Miles Clayton

    2008-10-14

    Rectangular PV modules (6) are mounted on a building roof (4) by mounting stands that are distributed in rows and columns. Each stand comprises a base plate (10) that rests on the building roof (4) and first and second brackets (12, 14) of different height attached to opposite ends of the base plate (10). Each bracket (12, 14) has dual members for supporting two different PV modules (6), and each PV module (6) has a mounting pin (84) adjacent to each of its four corners. Each module (6) is supported by attachment of two of its mounting pins (84) to different first brackets (12), whereby the modules (6) and their supporting stands are able to resist uplift forces resulting from high velocity winds without the base plates (10) being physically attached to the supporting roof structure (4). Preferably the second brackets (14) have a telescoping construction that permits their effective height to vary from less than to substantially the same as that of the first brackets (12).

  8. DOE Partnership Completes Successful CO2 Injection Test in the Mount Simon Sandstone

    Broader source: Energy.gov [DOE]

    The Midwest Regional Carbon Sequestration Partnership, one of seven partnerships in the U.S. Department of Energy's Regional Carbon Sequestration Partnerships program, has successfully injected 1,000 metric tons of carbon dioxide (CO2) into the Mount Simon Sandstone, a deep saline formation that is widespread across much of the Midwest.

  9. Superfund Record of Decision (Region 2): Love Canal/93rd Street, New York (third remedial action), September 1988

    SciTech Connect (OSTI)

    Not Available

    1988-09-26

    The Love Canal/93rd Street School site consists of approximately 19 acres and includes a school and an adjacent vacant lot. The site is located in Niagara Falls, New York, less than one mile northwest of Love Canal and is within the Love Canal Emergency Declaration Area. Hooker Chemicals and Plastics Corporation disposed of over 21,000 tons of various chemicals at the Love Canal site from 1942 to 1953, when the site was deeded over to the City of Niagara Falls Board of Education. Sampling has revealed that approximately 6,000 cu yds of soil are contaminated. During the 1950s, home construction accelerated in the area. Specifically, in 1950, the 93rd Street School was built, and in 1954, the 99th Street School was built adjacent to the middle portion of the Canal. Prior to construction of the 93rd Street School, a drainage swale crossed the site. Between 1938 and 1951, the swale was partially filled with soil and rock debris, followed by sand and fly ash materials. In 1980, the 93rd Street School was closed due to public health concerns related to the potentially contaminated fill material. The primary contaminants of concern affecting soil are VOCs, including toluene and xylenes, other organics including dioxins, PAHs and pesticides, and metals including arsenic and lead.

  10. Superfund record of decision (EPA Region 2): Love Canal, Niagara Falls, New York, October 1987. Second remedial action

    SciTech Connect (OSTI)

    Not Available

    1987-10-26

    The Love Canal site is located in the southeast corner of the city of Niagara Falls and is approximately one-quarter mile north of the Niagara River. The canal was one of two initial excavations designed to provide inexpensive hydroelectric power for industrial development around the turn of the 20th century. Hooker Chemicals and Plastics Corporation (Hooker), now Occidental Chemical Corporation, disposed of over 21,000 tons of chemical wastes, including dioxin-tainted trichlorophenols, into Love Canal between 1942 and 1953. In the mid to late 1970s, continued periods of high precipitation contributed to water accumulation in the disposal area causing chemically-contaminated leachate to be carried to the surface and into contact with residential-basement foundations. Also, dioxin and other contaminants migrated from Love Canal to the sewers which have outfalls to nearby creeks. The remedial program at Love Canal has been extensive and has occurred in two phases. Approximately 30,400 cu yd - 40,900 cu yd of creek and sewer sediments are contaminated with 2,3,7,8-tetrachlorodibenzo-p-dioxin, commonly referred to as dioxin.

  11. Relationship between sediment morphology and oil pollution along the Suez Canal beaches, Egypt

    SciTech Connect (OSTI)

    Barakat, M.A.K.; Shimy, T.M.; Mostafa, Y.M.

    1996-10-01

    In this study, marine surface sediments are collected from nine locations along the Suez Canal in order to investigate the relationship between the morphology of sands in the studied beaches and pollution by oil. Basically, the studied samples were analyzed by three techniques: grains-size analysis, microscopic examination, and gas chromatographic (GC) analysis. This study concluded that medium sand is the major class represented in the studied marine sediments. Pollution in these sand grains increases in the irregular grains more so than in the more rounded grains. Also, deep surface points, pitting, and fissures are considered to be good sites to precipitate oil contamination. Also, the presence of iron oxides may be taken as evidence for tanker ballast washings. The heavy fraction (zircon) shows more contamination than the light fraction (quartz) in these samples. Finally, GC profiles have shown two types of samples: one typical of weathered or highly weathered crude oil patterns and the other for samples with very highly weathered profiles. The relationship obtained between morphology studies and both oil content and GC chromatogram profiles indicates that all of the studied locations are suffering from pollution of oil that is spilled while shipping petroleum through the Suez Canal.

  12. A fisheries evaluation of the Wapato, Sunnyside, and Toppenish Creek canal fish screening facilities, spring 1988

    SciTech Connect (OSTI)

    Neitzel, D.A.; Abernethy, C.S.; Lusty, E.W.

    1990-03-01

    The Bonneville Power Administration, the United States Bureau of Reclamation, and the Washington State Department of Ecology are funding the construction and evaluation of fish passage and protection facilities at irrigation and hydroelectric diversions in the Yakima River Basin, Washington State. The programs provide offsite enhancement to compensate for fish and wildlife losses caused by hydroelectric development throughout the Columbia River Basin and address natural propagation of salmon to help mitigate the impact of irrigation in the Yakima River Basin. The Wapato, Sunnyside, and Toppenish Creek Screens are three of the facilities in the basin. This report evaluates the effectiveness of the screens in intercepting and returning juvenile salmonids unharmed to the river from which they were diverted. We evaluated the effectiveness of new screening facilities at the Toppenish Creek, Wapato, and Sunnyside canals in southcentral Washington State. Screen integrity tests indicated that fish released in front of the screens were prevented from entering the canal behind the screens. We conducted descaling tests at the Toppenish Creek Screens. We measured the time required for fish to move through the screen facilities. Methods used in 1988 were the same as those used at Sunnyside in 1985 and in subsequent years at Richland. Toppenish/Satus, and Wapato. 11 refs., 11 figs., 14 tabs.

  13. Mounting arrangement for the drive system of an air-bearing spindle on a machine tool

    DOE Patents [OSTI]

    Lunsford, J.S.; Crisp, D.W.; Petrowski, P.L.

    1987-12-07

    The present invention is directed to a mounting arrangement for the drive system of an air-bearing spindle utilized on a machine tool such as a lathe. The mounting arrangement of the present invention comprises a housing which is secured to the casing of the air bearing in such a manner that the housing position can be selectively adjusted to provide alignment of the air-bearing drive shaft supported by the housing and the air-bearing spindle. Once this alignment is achieved the air between spindle and the drive arrangement is maintained in permanent alignment so as to overcome misalignment problems encountered in the operation of the machine tool between the air-bearing spindle and the shaft utilized for driving the air-bearing spindle.

  14. Carbonyl sulfide and carbon disulfide from the eruptions of Mount St. Helens

    SciTech Connect (OSTI)

    Rasmussen, R.A.; Khalil, M.A.K.; Dalluge, R.W.; Penkett, S.A.; Jones, B.

    1982-01-01

    Ash from the massive 18 May 1980 eruption of Mount St. Helens readily gave off large amounts of carbonyl sulfide and carbon disulfide gases at room temperature. These findings suggest that the sulfur that enhances the Junge sulfate layer in the stratosphere after volcanic eruptions could be carried directly to the upper atmosphere as carbonyl sulfide and carbon disulfide adsorbed on ash particles from major volcanic eruptions.

  15. Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project Scoping and Feasibility

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3-0501 Unlimited Release Printed February 2013 Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project Scoping and Feasibility Joseph W. Pratt and Aaron P. Harris Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security

  16. Base excitation testing system using spring elements to pivotally mount wind turbine blades

    SciTech Connect (OSTI)

    Cotrell, Jason; Hughes, Scott; Butterfield, Sandy; Lambert, Scott

    2013-12-10

    A system (1100) for fatigue testing wind turbine blades (1102) through forced or resonant excitation of the base (1104) of a blade (1102). The system (1100) includes a test stand (1112) and a restoring spring assembly (1120) mounted on the test stand (1112). The restoring spring assembly (1120) includes a primary spring element (1124) that extends outward from the test stand (1112) to a blade mounting plate (1130) configured to receive a base (1104) of blade (1102). During fatigue testing, a supported base (1104) of a blad (1102) may be pivotally mounted to the test stand (1112) via the restoring spring assembly (1120). The system (1100) may include an excitation input assembly (1140) that is interconnected with the blade mouting plate (1130) to selectively apply flapwise, edgewise, and/or pitch excitation forces. The restoring spring assemply (1120) may include at least one tuning spring member (1127) positioned adjacent to the primary spring element (1124) used to tune the spring constant or stiffness of the primary spring element (1124) in one of the excitation directions.

  17. Effects of Love Canal soil extracts on maternal health and fetal development in rats

    SciTech Connect (OSTI)

    Silkworth, J.B.; Tumasonis, C.; Briggs, R.G.; Narang, A.S.; Narang, R.S.; Rej, R.; Stein, V.; McMartin, D.N.; Kaminsky, L.S.

    1986-10-01

    The effects of a solvent extract of the surface soil of the Love Canal chemical dump site, Niagara Falls, New York, and of a natural extract, or leachate, which is drained from the canal for treatment, on the maternal health and fetal development were determined in rats. The solvent extract, which was contaminated with 2,3,7,8-tetrachlorodibenzo-p-dioxin (2, 3,7,8-TCDD) at 170 ppb and numerous other chlorinated organic compounds with the primary identified components being the isomers of benzenehexachloride (BHC), was dissolved in corn oil and administered by gavage to pregnant rats at 0,25,75, or 150 mg crude extract/kg/day on Days 6-15 of gestation. A 67% mortality was observed at the highest dose. The rats were sacrificed on Day 20. Dose-related increases in relative liver weight accompanied by hepatocyte hypertrophy were observed at all dose levels. Fetal birthweight was decreased at 75 and 150 mg extract/kg/day. No major treatment-related soft tissue or skeletal malformations, except for delayed ossification, were observed. Based on literature values for BHC, all of the observed toxicity could be accounted for by the BHC contaminants of the extract. The crude organic phase of the leachate was administered to pregnant rats at 0,10,100, or 250 mg/kg/day as described above. Maternal weight gain decreased at 100 and 250 mg/kg/day, accompanied by 5 and 14% maternal mortality, and 1 and 3 dead fetuses, respectively. Early resorptions and the percentage of dead implants increased whereas fetal birthweights were decreased at 250 mg/kg/day. No major treatment-related soft tissue or skeletal malformations, except for delayed ossification, were observed. The primary components of the complex leachate by mass were tetrachloroethanes; however, 2,3,7,8-TCDD, which was present at 3 ppm, probably accounted for all the observed toxicity.

  18. Mitomycin-C- or Cisplatin-Based Chemoradiotherapy for Anal Canal Carcinoma: Long-Term Results

    SciTech Connect (OSTI)

    Olivatto, Luis O.; Cabral, Vania; Rosa, Arthur; Bezerra, Marcos; Santarem, Erick; Fassizoli, Ana; Castro, Leonaldson; Simoes, Jose Humberto; Small, Isabele A.; Ferreira, Carlos Gil

    2011-02-01

    Purpose: To evaluate the long-term efficacy of concurrent radiotherapy with mitomycin-C (MMC)-based or cisplatin (CP)-based combinations in a cohort of patients with locally advanced anal canal carcinoma. Methods and Materials: Between 1988 and 2000, 179 patients with locally advanced anal canal carcinoma were treated at the Instituto Nacional de Cancer with two cycles of chemotherapy during Weeks 1 and 5 of radiotherapy. 5-Fluorouracil (750 mg/m{sup 2} 120-hour infusion or 1,000 mg/m{sup 2} 96-hour infusion) plus CP (100 mg/m{sup 2}) on the first day of each cycle or MMC (10-15 mg/m{sup 2}) on the first day of Cycle 1 was administered concurrent with radiotherapy (total dose, 55-59.4 Gy). Of the 179 patients, 60% were included from a randomized trial initiated at the Instituto Nacional de Cancer in 1991 that compared concurrent chemoradiotherapy with MMC vs. CP. Results: The median follow-up for the whole chemoradiotherapy group was 83 months. The median patient age was 58 years, 57% had Stage T3-T4 tumors, and 35% had N-positive disease. The 5-year cumulative colostomy rate was not significantly different between the CP group (22%) and MMC group (29%; p = .28). The actuarial 10-year overall survival and disease-free survival rate for the CP group was 54% and 49% and for the MMC group was 52% and 53%, respectively (p = .32 and p = .92, respectively). On multivariate analysis, male gender (p = .042) and advanced Stage T3-T4 disease (p <.0001) were statistically significant for worse disease-free survival. Stage T3-T4 (p = .039) and N+ (p = .039) disease remained independently significant for overall survival. Conclusion: Long-term follow-up has confirmed the good results of chemoradiotherapy with CP plus 5-fluorouracil, which seem to provide results equivalent to those with MMC plus 5-fluorouracil.

  19. Ground-Based and Airborne (PMS 2-D Probe Canister-Mounted) 183 GHz Water

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vapor Radiometer Ground-Based and Airborne (PMS 2-D Probe Canister-Mounted) 183 GHz Water Vapor Radiometer Pazmany, Andrew ProSensing Inc. Category: Instruments ProSensing Inc. has developed a G-band (183 GHz, 1.5 mm wavelength) water vapor radiometer (GVR) for the measurement of low concentrations of atmospheric water vapor and liquid water. The instrument's precipitable water vapor measurement precision is approximately 0.01 mm in dry (<2 mm vapor column) conditions. The ground-based

  20. Eddy current probe with foil sensor mounted on flexible probe tip and method of use

    DOE Patents [OSTI]

    Viertl, John R. M.; Lee, Martin K.

    2001-01-01

    A pair of copper coils are embedded in the foil strip. A first coil of the pair generates an electromagnetic field that induces eddy currents on the surface, and the second coil carries a current influenced by the eddy currents on the surface. The currents in the second coil are analyzed to obtain information on the surface eddy currents. An eddy current probe has a metal housing having a tip that is covered by a flexible conductive foil strip. The foil strip is mounted on a deformable nose at the probe tip so that the strip and coils will conform to the surface to which they are applied.

  1. Work plan for the fabrication of the radioisotope thermoelectric generator transportation system package mounting

    SciTech Connect (OSTI)

    Satoh, J.A.

    1994-11-09

    The Radioisotope Thermoelectric Generator (RTG) has available a dedicated system for the transportation of RTG payloads. The RTG Transportation System (System 100) is comprised of four systems; the Package (System 120), the Semi-trailer (System 140), the Gas Management (System 160), and the Facility Transport (System 180). This document provides guidelines on the fabrication, technical requirements, and quality assurance of the Package Mounting (Subsystem 145), part of System 140. The description follows the Development Control Requirements of WHC-CM-6-1, EP 2.4, Rev. 3.

  2. SPECKLE INTERFEROMETRY AT MOUNT WILSON OBSERVATORY: OBSERVATIONS OBTAINED IN 2006-2007 AND 35 NEW ORBITS

    SciTech Connect (OSTI)

    Hartkopf, William I.; Mason, Brian D. E-mail: bdm@usno.navy.mil

    2009-09-15

    Results are presented for 607 speckle interferometric observations of double stars, as well as 222 measures of single stars or unresolved pairs. All data were obtained in 2006 and 2007 at the Mount Wilson Observatory, using the 2.5 m Hooker telescope. Separations range from 0.''06 to 6.''31, with a median of 0.''34. These three observing runs concentrated on binaries in need of confirmation (mainly Hipparcos and Tycho pairs), as well as systems in need of improved orbital elements. New orbital solutions have been determined for 35 systems as a result.

  3. Passive pavement-mounted acoustical linguistic drive alert system and method

    DOE Patents [OSTI]

    Kisner, Roger A.; Anderson, Richard L.; Carnal, Charles L.; Hylton, James O.; Stevens, Samuel S.

    2001-01-01

    Systems and methods are described for passive pavement-mounted acoustical alert of the occupants of a vehicle. A method of notifying a vehicle occupant includes providing a driving medium upon which a vehicle is to be driven; and texturing a portion of the driving medium such that the textured portion interacts with the vehicle to produce audible signals, the textured portion pattern such that a linguistic message is encoded into the audible signals. The systems and methods provide advantages because information can be conveyed to the occupants of the vehicle based on the location of the vehicle relative to the textured surface.

  4. Evaluation of radon progeny from Mount St. Helens eruptions. Final report

    SciTech Connect (OSTI)

    Lepel, E.A.; Olsen, K.B.; Thomas, V.W.; Eichner, F.N.

    1982-09-01

    A network of twelve monitoring sites around Mount St. Helens was established to evaluate possible short-lived radioactivity in the fallen ash. Seven sites were located near major population centers of Washington and Oregon, and five sites were located within 80 km of the volcano. Each site monitored the radioactivity present by the use of thermoluminescent dosimeters which recorded the total exposure to radioactivity over the exposure period. Eruptions occurring on July 22, August 7, and October 16 to 18, 1980 were monitored. No statistically significant quantities of measurable radon daughters were observed.

  5. Design of precision mounts for optimizing the conversion efficiency of KDP crystals for the National Ignition Facility

    SciTech Connect (OSTI)

    Hibbard, R.L., LLNL

    1998-03-30

    A key design challenge for the National Ignition Facility (NIF), being constructed at Lawrence Livermore National Laboratory (LLNL), [Hibbard, R L , 1998], is the frequency converter consisting of two KDP crystals and a focusing lens Frequency conversion is a critical performance factor for NIF and the optical mount design for this plays a key role in meeting design specifications The frequency converter is a monolithic cell that mounts the optics and is the point on the beamline where the frequency conversion crystals are optimally aligned and the cell is focused on target The lasing medium is neodymium in phosphate glass with a fundamental frequency (1{omega}) of 1 053 {micro}m Sum frequency generation in a pair of conversion crystals (KDP/KD*P) produces 1 8 MJ of the third harmonic light (3{omega} or {lambda}=O 35 pm). The phase-matching scheme on NIF is type I second harmonic generation followed by type II sum-frequency-mixing of the residual fundamental and the second harmonic light This laser unlike previous laser system designs, must achieve high conversion efficiency, 85%, which is close to the 90 8% theoretical maximum As a result, this design is very sensitive to angular variations in beam propagation and in the crystal axes orientation. Factors that influence the phase matching angle include crystal inhomogeneity, residual and induced stress in the crystals, the crystals` natural and mounted surface figure, mounting imperfections and gravity sag These angular variations need to be controlled within a 40 {micro}rad error budget. The optical mount contributions to the angular error budget are 20 {micro}rad and are what make the frequency converter in the Final Optics Cell (FOC) such a challenging precision design. The premise of using full edge support in the FOC design is primarily driven by the spherical target chamber design that has optics mounted at multiple longitudinal angles and thus gravity sag in the crystals that needs to be minimized To meet

  6. Life state response to environmental crisis: the case of the Love Canal, Niagara Falls, New York

    SciTech Connect (OSTI)

    Masters, S.K.

    1986-01-01

    This thesis explored the differences between two life stages - young and old - in perceiving and responding to man-made environmental disaster, as well as the support resources utilized to cope with disaster - personal, familial/friendship, and organizational. Because of the characteristics of man-made environmental disaster, and because of the different conditions of life and constructions of reality of older and younger families, it was expected that definitions of the situation would vary by life stage and locus of control - authoritative and personal. The research took place in the Love Canal neighborhood of Niagara Falls, New York. Fifty-eight families were interviewed in the fall of 1978, and thirty-nine of these families were reinterviewed in the spring of 1979. Interviews were tape recorded, transcribed, and coded. The data were presented in contingency tables and interview excerpts. The interview schedules elicited information of perception of impact, responses to impact, and the utilization of support resources. In an authoritative locus of control situation, the major findings were that both older and younger families perceived impact, that older families were slightly less disrupted, that younger families relied on organizational and familial/friendship support resources, and that older families relied on familial/friendship support resources.

  7. Focused risk assessment: Mound Plant, Miami-Erie Canal Operable Unit 4

    SciTech Connect (OSTI)

    Rogers, D.R.; Dunning, D.F.

    1994-09-29

    In 1969, an underground waste line at Mound Plant ruptured and released plutonium-238 in a dilute nitric acid solution to the surrounding soils. Most of the acid was neutralized by the native soils. The plutonium, which in a neutral solution is tightly sorbed onto clay particles, remained within the spill area. During remediation, a severe storm eroded some of the contaminated soil. Fine grained plutonium-contaminated clay particles were carried away through the natural drainage courses to the remnants of the Miami-Erie Canal adjacent to Mound Plant, and then into the Great Miami River. This focused risk assessment considers exposure pathways relevant to site conditions, including incidental ingestion of contaminated soils, ingestion of drinking water and fish, and inhalation of resuspended soils and sediments. For each potential exposure pathway, a simplified conceptual model and exposure scenarios have been used to develop conservative estimates of potential radiation dose equivalents and health risks. The conservatism of the dose and risk estimates provides a substantive margin of safety in assuring that the public health is protected.

  8. Pyrometer mount for a closed-circuit thermal medium cooled gas turbine

    DOE Patents [OSTI]

    Jones, Raymond Joseph; Kirkpatrick, Francis Lawrence; Burns, James Lee; Fulton, John Robert

    2002-01-01

    A steam-cooled second-stage nozzle segment has an outer band and an outer cover defining a plenum therebetween for receiving cooling steam for flow through the nozzles to the inner band and cover therefor and return flow through the nozzles. To measure the temperature of the buckets of the stage forwardly of the nozzle stage, a pyrometer boss is electron beam-welded in an opening through the outer band and TIG-welded to the outer cover plate. By machining a hole through the boss and seating a linearly extending tube in the boss, a line of sight between a pyrometer mounted on the turbine frame and the buckets is provided whereby the temperature of the buckets can be ascertained. The welding of the boss to the outer band and outer cover enables steam flow through the plenum without leakage, while providing a line of sight through the outer cover and outer band to measure bucket temperature.

  9. Magmatic model for the Mount St. Helens blast of May 18, 1980

    SciTech Connect (OSTI)

    Eichelberger, J.C.; Hayes, D.B.

    1982-09-10

    Analytical and numerical solutions to the hydrodynamic equations of motion, constrained by physical properties of juvenile ejecta in the Mount St. Helens blast deposit, were used to investigate magmatic conditions required to produce the initial devastating blast phase of the eruption of May 18, 1980. Evidence that the blast was magmatic includes equivalence in volume of juvenile blast ejecta to preeruption inflation of the cone, substantial vesicularity of this ejecta, and continued vesiculation of large juvenile clasts after eruption. Observed or inferred ejecta velocities of 100 to 250 m/s are shown to require 0.2 to 0.7 wt% water vapor preexisting in magma unloaded by a landslide 200 to 900 m thick. These conditions imply total magmatic water contents of 0.7 to 1.7 wt%, respectively. Such low required water content suggests that volcanic blasts may be regarded as a normal consequence of magma intrusion into an unstable edifice.

  10. Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project Scoping and Feasibility.

    SciTech Connect (OSTI)

    Pratt, Joseph William; Harris, Aaron P

    2013-01-01

    A barge-mounted hydrogen-fueled proton exchange membrane (PEM) fuel cell system has the potential to reduce emissions and fossil fuel use of maritime vessels in and around ports. This study determines the technical feasibility of this concept and examines specific options on the U.S. West Coast for deployment practicality and potential for commercialization.The conceptual design of the system is found to be straightforward and technically feasible in several configurations corresponding to various power levels and run times.The most technically viable and commercially attractive deployment options were found to be powering container ships at berth at the Port of Tacoma and/or Seattle, powering tugs at anchorage near the Port of Oakland, and powering refrigerated containers on-board Hawaiian inter-island transport barges. Other attractive demonstration options were found at the Port of Seattle, the Suisun Bay Reserve Fleet, the California Maritime Academy, and an excursion vessel on the Ohio River.

  11. A retrospective tiered environmental assessment of the Mount Storm Wind Energy Facility, West Virginia,USA

    SciTech Connect (OSTI)

    Efroymson, Rebecca Ann; Day, Robin; Strickland, M. Dale

    2012-11-01

    Bird and bat fatalities from wind energy projects are an environmental and public concern, with post-construction fatalities sometimes differing from predictions. Siting facilities in this context can be a challenge. In March 2012 the U.S. Fish and Wildlife Service (USFWS) released Land-based Wind Energy Guidelines to assess collision fatalities and other potential impacts to species of concern and their habitats to aid in siting and management. The Guidelines recommend a tiered approach for assessing risk to wildlife, including a preliminary site evaluation that may evaluate alternative sites, a site characterization, field studies to document wildlife and habitat and to predict project impacts, post construction studies to estimate impacts, and other post construction studies. We applied the tiered assessment framework to a case study site, the Mount Storm Wind Energy Facility in Grant County, West Virginia, USA, to demonstrate the use of the USFWS assessment approach, to indicate how the use of a tiered assessment framework might have altered outputs of wildlife assessments previously undertaken for the case study site, and to assess benefits of a tiered ecological assessment framework for siting wind energy facilities. The conclusions of this tiered assessment for birds are similar to those of previous environmental assessments for Mount Storm. This assessment found risk to individual migratory tree-roosting bats that was not emphasized in previous preconstruction assessments. Differences compared to previous environmental assessments are more related to knowledge accrued in the past 10 years rather than to the tiered structure of the Guidelines. Benefits of the tiered assessment framework include good communication among stakeholders, clear decision points, a standard assessment trajectory, narrowing the list of species of concern, improving study protocols, promoting consideration of population-level effects, promoting adaptive management through post

  12. Dose planning objectives in anal canal cancer IMRT: the TROG ANROTAT experience

    SciTech Connect (OSTI)

    Brown, Elizabeth; Cray, Alison; Haworth, Annette; Chander, Sarat; Lin, Robert; Subramanian, Brindha; Ng, Michael

    2015-06-15

    Intensity modulated radiotherapy (IMRT) is ideal for anal canal cancer (ACC), delivering high doses to irregular tumour volumes whilst minimising dose to surrounding normal tissues. Establishing achievable dose objectives is a challenge. The purpose of this paper was to utilise data collected in the Assessment of New Radiation Oncology Treatments and Technologies (ANROTAT) project to evaluate the feasibility of ACC IMRT dose planning objectives employed in the Australian situation. Ten Australian centres were randomly allocated three data sets from 15 non-identifiable computed tomography data sets representing a range of disease stages and gender. Each data set was planned by two different centres, producing 30 plans. All tumour and organ at risk (OAR) contours, prescription and dose constraint details were provided. Dose–volume histograms (DVHs) for each plan were analysed to evaluate the feasibility of dose planning objectives provided. All dose planning objectives for the bone marrow (BM) and femoral heads were achieved. Median planned doses exceeded one or more objectives for bowel, external genitalia and bladder. This reached statistical significance for bowel V30 (P = 0.04), V45 (P < 0.001), V50 (P < 0.001), external genitalia V20 (P < 0.001) and bladder V35 (P < 0.001), V40 (P = 0.01). Gender was found to be the only significant factor in the likelihood of achieving the bowel V50 (P = 0.03) and BM V30 constraints (P = 0.04). The dose planning objectives used in the ANROTAT project provide a good starting point for ACC IMRT planning. To facilitate clinical implementation, it is important to prioritise OAR objectives and recognise factors that affect the achievability of these objectives.

  13. Prairie Canal Well No. 1, Calcasieu Parish, Louisiana. Volume 1. Completion and testing. Final report

    SciTech Connect (OSTI)

    Not Available

    1981-01-01

    The Prairie Canal Company, Inc. Well No. 1, approximately 8 miles south of the city of Lake Charles, Louisiana, was tested through the annulus between 5-1/2 inch casing and 2-3/8 inch tubing. The interval tested was from 14,782 to 14,820 feet. The geological section was the Hackberry Sand, a member of the Oligocene Frio formation. Produced water was injected into a disposal well which was perforated in several Miocene Sands from 3070 to 4600 feet. Original plans were to test a section of the Hackberry sand from 14,976 to 15,024 feet. This primary zone, however, produced a large amount of sand, shale, gravel, and rocks during early flow periods and was abandoned in favor of the secondary zone. Four pressure drawdown flow tests and three pressure buildup tests were conducted during a 12-day period. A total of 36,505 barrels of water was produced. The highest sustained flow rate was approximately 7100 BWPD. The gas-to-water ratio, measured during testing, ranged from 41 to 50 SCF/BBL. There is disagreement as to the saturation value of the reservoir brine, which may be between 43.3 and 49.7 SCF/BBL. The methane content of the flare line gas averaged 88.4 mole percent. The CO/sub 2/ content averaged 8.4 mole percent. Measured values of H/sub 2/S in the gas were between 12 and 24 ppM.

  14. Fractional-Slot Surface Mounted PM Motors with Concentrated Windings for HEV Traction Drives

    SciTech Connect (OSTI)

    Bailey, J.M.

    2005-10-24

    High-power density and efficiency resulting from elimination of rotor windings and reduced magnetic-flux losses have made the rare earth permanent magnet (PM) motor a leading candidate for the Department of Energy's Office of FreedomCAR and Vehicle Technologies (FCVTs) traction drive motor. These traction drives are generally powered by radial-gap motors, having the magnets on or embedded in a rotating cylinder separated from the inside surface of a slotted cylindrical stator by an annular gap. The two main types of radial-gap PM rotors are those with magnets mounted on the surface of a supporting back iron, called PM surface mounted (PMSM) motors, and those with magnets mounted in slots in the rotor, called interior PM (IPM) motors. Most early PM motor research was on the PMSM motor, which was thought to have an inherently low stator inductance. A low stator inductance can lead to currents dangerously exceeding rated current as the back-emf across the inductance increases with speed; consequently, part of the attempted solution has been to increase the stator inductance to reduce the rate of current rise. Although analysis suggested that there should be no problem designing sufficiently high stator inductance into PMSMs, attempts to do so were often not successful and a motor design was sought that would have a higher intrinsic inductance. Commercial research at Toyota has focused on IPM motors because they can achieve a high-saliency ratio, which helps them operate over a high constant power speed ratio (CPSR), but they are more difficult to fabricate. The Oak Ridge National Laboratory's (ORNL) position has been to continue research on brushless direct current (dc) motors (BDCMs) because of ease of fabrication and increased power output. Recently there has been a revival of interest in a fractional-slot PMSMs [15] made with concentrated windings because they possess three important features. First, they can increase the motor's inductance sufficiently to reduce

  15. Superfund Record of Decision (EPA Region 2): Love Canal (93rd Street School), Niagara County, City of Niagara Falls, NY. (Third remedial action), (amendment), May 1991. Final report

    SciTech Connect (OSTI)

    Not Available

    1991-05-15

    The Love Canal (93rd Street) site is an inactive hazardous waste site located in Niagara Falls, New York. The 19-acre 93rd Street School site, one of several operable units for the Love Canal Superfund site, is the focus of the Record of Decision (ROD). The fill material is reported to contain fly ash and BHC (a pesticide) waste. The ROD amends the 1988 ROD, and addresses final remediation of onsite contaminated soil through excavation and offsite disposal. The primary contaminants of concern affecting the soil are VOCs including toluene and xylenes; other organics including PAHs and pesticides; and metals including arsenic, chromium, and lead.

  16. Fuel Economy and Emissions Effects of Low Tire Pressure, Open Windows, Roof Top and Hitch-Mounted Cargo, and Trailer

    SciTech Connect (OSTI)

    Thomas, John F; Huff, Shean P; West, Brian H

    2014-01-01

    To quantify the fuel economy (FE) effect of some common vehicle accessories or alterations, a compact passenger sedan and a sport utility vehicle (SUV) were subjected to SAE J2263 coastdown procedures. Coastdowns were conducted with low tire pressure, all windows open, with a roof top or hitch-mounted cargo carrier, and with the SUV pulling an enclosed cargo trailer. From these coastdowns, vehicle dynamometer coefficients were developed which enabled the execution of vehicle dynamometer experiments to determine the effect of these changes on vehicle FE and emissions over standard drive cycles and at steady highway speeds. The FE penalty associated with the rooftop cargo box mounted on the compact sedan was as high as 25-27% at higher speeds, where the aerodynamic drag is most pronounced. For both vehicles, use of a hitch mounted cargo tray carrying a similar load resulted in very small FE penalties, unlike the rooftop cargo box. The results for the SUV pulling a 3500 pound enclosed cargo trailer were rather dramatic, resulting in FE penalties ranging from 30%, for the city cycle, to 50% at 80 mph, at which point significant CO generation indicated protective enrichment due to high load. Low tire pressure cases resulted in negligible to 10% FE penalty depending on the specific case and test point. Driving with all four windows open decreased FE by 4-8.5% for the compact sedan, and 1-4% for the SUV.

  17. Shenandoah County, Virginia: Energy Resources | Open Energy Informatio...

    Open Energy Info (EERE)

    in Shenandoah County, Virginia Basye-Bryce Mountain, Virginia Edinburg, Virginia Mount Jackson, Virginia New Market, Virginia Strasburg, Virginia Toms Brook, Virginia Woodstock,...

  18. 10 Questions for a Cosmologist: Tom Abel

    Office of Energy Efficiency and Renewable Energy (EERE)

    Abel, a cosmologist working at SLAC National Accelerator Laboratory, uses supercomputer calculations to help learn about what happened in the first billion years of the history of the Universe. Get the download on his work modeling the first supernova, his favorite gadget in the lab and why supercomputers are critical assets to this intergalactic exploration.

  19. Radioisotope Thermoelectric Generator Transporation System licensed hardware second certification test series and package shock mount system test

    SciTech Connect (OSTI)

    Ferrell, P.C.; Moody, D.A.

    1995-10-01

    This paper presents a summary of two separate drop test a e performed in support of the Radioisotope Thermoelectric Generator (RTG) Transportation System (RTGTS). The first portion of this paper presents the second series of drop testing required to demonstrate that the RTG package design meets the requirements of Title 10, Code of Federal Regulations, ``Part 71`` (10 CFR 71). Results of the first test series, performed in July 1994, demonstrated that some design changes were necessary. The package design was modified to improve test performance and the design changes were incorporated into the Safety Analysis Report for Packaging (SARP). The second full-size certification test article (CTA-2) incorporated the modified design and was tested at the US Department of Energy`s (DOE) Hanford Site near Richland, Washington. With the successful completion of the test series, and pending DOE Office of Facility Safety Analysis approval of the SARP, a certificate of compliance will be issued for the RTG package allowing its use. The second portion of this paper presents the design and testing of the RTG Package Mount System. The RTG package mount was designed to protect the RTG from excessive vibration during transport, provide shock protection during on/off loading, and provide a mechanism for moving the RTG package with a forklift. Military Standard (MIL-STD) 810E, Transit Drop Procedure (DOE 1989), was used to verify that the shock limiting system limited accelerations in excess of 15 G`s at frequencies below 150 Hz. Results of the package mount drop tests indicate that an impact force of 15 G`s was not exceeded in any test from a free drop height of 457 mm (18 in.).

  20. Radioisotope Thermoelectric Generator Transportation System licensed hardware second certification test series and package shock mount system test

    SciTech Connect (OSTI)

    Ferrell, P.C.; Moody, D.A.

    1996-03-01

    This paper presents a summary of two separate drop test activities that were performed in support of the Radioisotope Thermoelectric Generator (RTG) Transportation System (RTGTS). The first portion of this paper presents the second series of drop testing required to demonstrate that the RTG package design meets the requirements of {ital Title} 10, {ital Code} {ital of} {ital Federal} {ital Regulations}, {open_quote}{open_quote}Part 71{close_quote}{close_quote} (10 CFR 71). Results of the first test series, performed in July 1994, demonstrated that some design changes were necessary. The package design was modified to improve test performance and the design changes were incorporated into the Safety Analysis Report for Packaging (SARP). The second full-size certification test article (CTA-2) incorporated the modified design and was tested at the U.S. Department of Energy{close_quote}s (DOE) Hanford Site near Richland, Washington. With the successful completion of the test series, and pending DOE Office of Facility Safety Analysis approval of the SARP, a certificate of compliance will be issued for the RTG package allowing its use. The second portion of this paper presents the design and testing of the RTG Package Mount System. The RTG package mount was designed to protect the RTG from excessive vibration during transport, provide shock protection during on/off loading, and provide a mechanism for moving the RTG package with a forklift. Military Standard (MIL-STD) 810E, {ital Transit} {ital Drop} {ital Procedure} (DOE 1989), was used to verify that the shock limiting system limited accelerations in excess of 15 G{close_quote}s at frequencies below 150 Hz. Results of the package mount drop tests indicate that an impact force of 15 G{close_quote}s was not exceeded in any test from a free drop height of 457 mm (18 in.). {copyright} {ital 1996 American Institute of Physics.}

  1. Evacuated optical structure comprising optical bench mounted to sidewall of vacuum chamber in a manner which inhibits deflection and rotation of the optical bench

    DOE Patents [OSTI]

    Bowers, J.M.

    1994-04-19

    An improved evacuated optical structure is disclosed comprising an optical bench mounted in a vacuum vessel in a manner which inhibits transmission of movement of the vacuum vessel to the optical bench, yet provides a compact and economical structure. The vacuum vessel is mounted, through a sidewall thereof, to a support wall at four symmetrically positioned and spaced apart areas, each of which comprises a symmetrically positioned group of mounting structures passing through the sidewall of the vacuum vessel. The optical bench is pivotally secured to the vacuum vessel by four symmetrically spaced apart bolts and spherical bearings, each of which is centrally positioned within one of the four symmetrically positioned groups of vacuum vessel mounting structures. Cover plates and o-ring seals are further provided to seal the vacuum vessel mounting structures from the interior of the vacuum vessel, and venting bores are provided to vent trapped gases in the bores used to secure the cover plates and o-rings to the vacuum vessel. Provision for detecting leaks in the mounting structures from the rear surface of the vacuum vessel sidewall facing the support wall are also provided. Deflection to the optical bench within the vacuum vessel is further minimized by tuning the structure for a resonant frequency of at least 100 Hertz. 10 figures.

  2. Evacuated optical structure comprising optical bench mounted to sidewall of vacuum chamber in a manner which inhibits deflection and rotation of the optical bench

    DOE Patents [OSTI]

    Bowers, Joel M.

    1994-01-01

    An improved evacuated optical structure is disclosed comprising an optical bench mounted in a vacuum vessel in a manner which inhibits transmission of movement of the vacuum vessel to the optical bench, yet provides a compact and economical structure. The vacuum vessel is mounted, through a sidewall thereof, to a support wall at four symmetrically positioned and spaced apart areas, each of which comprises a symmetrically positioned group of mounting structures passing through the sidewall of the vacuum vessel. The optical bench is pivotally secured to the vacuum vessel by four symmetrically spaced apart bolts and spherical bearings, each of which is centrally positioned within one of the four symmetrically positioned groups of vacuum vessel mounting structures. Cover plates and o-ring seals are further provided to seal the vacuum vessel mounting structures from the interior of the vacuum vessel, and venting bores are provided to vent trapped gases in the bores used to secure the cover plates and o-rings to the vacuum vessel. Provision for detecting leaks in the mounting structures from the rear surface of the vacuum vessel sidewall facing the support wall are also provided. Deflection to the optical bench within the vacuum vessel is further minimized by tuning the structure for a resonant frequency of at least 100 Hertz.

  3. Efficacy of low level electric current (A-C) for controlling quagga mussles in the Welland Canal

    SciTech Connect (OSTI)

    Fears, C.; Mackie, G.L.

    1995-06-01

    The efficacy of systems (for which patents are pending) which use low-voltage A-C currents for preventing settlement and attachment by zebra mussels were tested with steel rods and plates placed near the intake of a pulp and paper plant in the Welland Canal at Thorold, Ontario. Six racks made of 16 ft. (4.9 m), 2x4s (5.1 x 10.2 cm) were placed into the Welland Canal on August 5, 1994. One rack had 1/8th in (3.2 mm) diam x 12 in (30.5 cm) long steel rods, each separated by 2 in (5.1 cm) attached to pressure treated wood and concrete blocks and an A-C current of 16 v (or 8 v/in); rack 2 had steel rods of the same configuration but 12 v (or 6 v/in) was applied; rack 3 was identical to these but no current was applied and was used as a rod control. The remaining three racks had steel plates, each plate being 3 in (7.6 cm) wide X 24 in (61 cm) long X 1/4 in (6.4 mm) thick and separated by 2 in (5.1 cm); one had 12 v applied (or 6 v/in), another had 16 v applied (or 8 v/in), and the third had no current and was used as a plate control. The racks were placed on the upstream and downstream side of the intake at a depth of about 7 ft (2.1 m) where the mussels populations were heaviest (as determined by SCUBA diving). All mussels were quagga mussels (Dreissena bugensis). The racks were pulled in mid November after settlement was complete and the results showed: (1) complete prevention of settlement of both new recruits and translocators at 8 volts/in with steel rods on both wood and concrete surfaces and with steel plate trash bars; (2) partial prevention of settlement at 6 volts/in with steel rods on both wood and concrete surfaces and steel plates; and (3) that, at current kilowatt hr rates, total efficacy at 8 volts/in would cost approximately $10.80/day/1000 sq ft using rods to protect concrete walls and about $16.32/day/1000 sq ft to protect 3 in wide x 1/4 in thick trash bars. These costs can be reduced even further with pulse dosed AC currents.

  4. Carcinoma of the anal canal: Intensity modulated radiation therapy (IMRT) versus three-dimensional conformal radiation therapy (3DCRT)

    SciTech Connect (OSTI)

    Sale, Charlotte; Moloney, Phillip; Mathlum, Maitham

    2013-12-15

    Patients with anal canal carcinoma treated with standard conformal radiotherapy frequently experience severe acute and late toxicity reactions to the treatment area. Roohipour et al. (Dis Colon Rectum 2008; 51: 14753) stated a patient's tolerance of chemoradiation to be an important prediction of treatment success. A new intensity modulated radiation therapy (IMRT) technique for anal carcinoma cases has been developed at the Andrew Love Cancer Centre aimed at reducing radiation to surrounding healthy tissue. A same-subject repeated measures design was used for this study, where five anal carcinoma cases at the Andrew Love Cancer Centre were selected. Conformal and IMRT plans were generated and dosimetric evaluations were performed. Each plan was prescribed a total of 54 Gray (Gy) over a course of 30 fractions to the primary site. The IMRT plans resulted in improved dosimetry to the planning target volume (PTV) and reduction in radiation to the critical structures (bladder, external genitalia and femoral heads). Statistically there was no difference between the IMRT and conformal plans in the dose to the small and large bowel; however, the bowel IMRT dosevolume histogram (DVH) doses were consistently lower. The IMRT plans were superior to the conformal plans with improved dose conformity and reduced radiation to the surrounding healthy tissue. Anecdotally it was found that patients tolerated the IMRT treatment better than the three-dimensional (3D) conformal radiation therapy. This study describes and compares the planning techniques.

  5. Environmental geophysics of the Pilot Plant on the west branch of Canal Creek, Aberdeen Proving Ground, Maryland

    SciTech Connect (OSTI)

    McGinnis, L.D.; Miller, S.F.; Daudt, C.R.; Thompson, M.D.; Borden, H.; Benson, M.; Wrobel, J.

    1994-05-01

    Plans to demolish and remediate the Pilot Plant complex in the Edgewood Area of Aberdeen Proving Ground have served to initiate a series of nonintrusive, environmental-geophysical studies. The studies are assisting in the location and identification of pipes, tanks, trenches, and liquid waste in the subsurface. Multiple databases have been integrated to provide support for detection of underground utilities and to determine the stratigraphy and lithology of the subsurface. The studies were conducted within the double security fence and exterior to the double fence, down gradient toward the west branch of Canal Creek. To determine if contaminants found in the creek were associated with the Pilot Plant, both the east and west banks were included in the study area. Magnetic, conductivity, inductive emf, and ground-penetrating-radar anomalies outline buried pipes, trenches, and various pieces of hardware associated with building activities. Ground-penetrating-radar imagery also defines a paleovalley cut 30 ft into Potomac Group sediments of Cretaceous age. The paleovalley crosses the site between Building E5654 and the Pilot Plant fence. The valley is environmentally significant because it may control the pathways of contaminants. The Pilot Plant complex was used to manufacture CC2 Impregnite and incapacitating agents; it also served as a production facility for nerve agents.

  6. Method and apparatus for mounting a dichroic mirror in a microwave powered lamp assembly using deformable tabs

    DOE Patents [OSTI]

    Ury, Michael; Sowers, Frank; Harper, Curt; Love, Wayne

    1998-01-01

    A microwave powered electrodeless lamp includes an improved screen unit having mesh and solid sections with an internal reflector secured at the juncture of the two sections to reflect light into a light-transmitting chamber defined in the lamp microwave cavity by the reflector and the mesh section. A discharge envelope of a bulb is disposed in the light-transmitting chamber. Light emitted from the envelope is prevented by the reflector from entering the cavity portion bounded by the solid section of the screen. The reflector is mounted in the cavity by tabs formed in the screen unit and bendable into the cavity to define support planes abutting respective surfaces of the reflector. The mesh section and tabs are preferably formed by etching a thin metal sheet.

  7. Method and apparatus for mounting a dichroic mirror in a microwave powered lamp assembly using deformable tabs

    DOE Patents [OSTI]

    Ury, M.; Sowers, F.; Harper, C.; Love, W.

    1998-11-24

    A microwave powered electrodeless lamp includes an improved screen unit having mesh and solid sections with an internal reflector secured at the juncture of the two sections to reflect light into a light-transmitting chamber defined in the lamp microwave cavity by the reflector and the mesh section. A discharge envelope of a bulb is disposed in the light-transmitting chamber. Light emitted from the envelope is prevented by the reflector from entering the cavity portion bounded by the solid section of the screen. The reflector is mounted in the cavity by tabs formed in the screen unit and bendable into the cavity to define support planes abutting respective surfaces of the reflector. The mesh section and tabs are preferably formed by etching a thin metal sheet. 7 figs.

  8. New Whole-House Solutions Case Study: Lancaster County Career and Technology Center Green Home 3 - Mount Joy, Pennsylvania

    SciTech Connect (OSTI)

    2014-12-01

    This case study describes a unique vocational program at Lancaster County Career Technology Center in Mount Joy, PA, where high school students are gaining hands-on construction experience in building high performance homes with help from Building America team, Home Innovation Research Labs. This collaboration resulted in the Green Home 3, the third in a series of high performance homes for Apprentice Green. As one of LCCTC’s key educational strategies for gaining practical experience, students are involved in building real houses that incorporate state-of-the-art energy efficiency and green technologies. With two homes already completed, the Green Home 3 achieved a 44% whole-house energy savings over the Building America New Construction B10 Benchmark, DOE Zero Energy Ready Home (formerly Challenge Home) certification, and National Green Building Standard Gold-level certification.

  9. Investigation of gas hydrate-bearing sandstone reservoirs at the "Mount Elbert" stratigraphic test well, Milne Point, Alaska

    SciTech Connect (OSTI)

    Boswell, R.M.; Hunter, R.; Collett, T.; Digert, S. Inc., Anchorage, AK); Hancock, S.; Weeks, M. Inc., Anchorage, AK); Mt. Elbert Science Team

    2008-01-01

    In February 2007, the U.S. Department of Energy, BP Exploration (Alaska), Inc., and the U.S. Geological Survey conducted an extensive data collection effort at the "Mount Elbert #1" gas hydrates stratigraphic test well on the Alaska North Slope (ANS). The 22-day field program acquired significant gas hydrate-bearing reservoir data, including a full suite of open-hole well logs, over 500 feet of continuous core, and open-hole formation pressure response tests. Hole conditions, and therefore log data quality, were excellent due largely to the use of chilled oil-based drilling fluids. The logging program confirmed the existence of approximately 30 m of gashydrate saturated, fine-grained sand reservoir. Gas hydrate saturations were observed to range from 60% to 75% largely as a function of reservoir quality. Continuous wire-line coring operations (the first conducted on the ANS) achieved 85% recovery through 153 meters of section, providing more than 250 subsamples for analysis. The "Mount Elbert" data collection program culminated with open-hole tests of reservoir flow and pressure responses, as well as gas and water sample collection, using Schlumberger's Modular Formation Dynamics Tester (MDT) wireline tool. Four such tests, ranging from six to twelve hours duration, were conducted. This field program demonstrated the ability to safely and efficiently conduct a research-level openhole data acquisition program in shallow, sub-permafrost sediments. The program also demonstrated the soundness of the program's pre-drill gas hydrate characterization methods and increased confidence in gas hydrate resource assessment methodologies for the ANS.

  10. Uranium hydrogeochemical and stream sediment reconnaissance of the Bradfield Canal NTS quadrangle, Alaska. National Uranium Resource Evaluation

    SciTech Connect (OSTI)

    Shettel, D.L. Jr.; Langfeldt, S.L.; Hardy, L.C.; D'Andrea, R.F. Jr.; Zinkl, R.J.; Hensley, W.K.; Thomas, G.J.; Martell, C.J.; Maassen, L.W.

    1981-11-01

    This report presents results of a Hydrogeochemical and Stream Sediment Reconnaissance (HSSR) of the Bradfield Canal NTMS quadrangle, Alaska. In addition to this abbreviaed data release, more complete data are available to the public in machine-readable form. These machine-readable data, as well as quarterly or semiannual program progress reports containing further information on the HSSR program in general, or on the Los Alamos National Laboratory (LANL) portion of the program in particular, are available from DOE's Technical Library at its Grand Junction Area Office. Presented in this data release are location data, field analyses, and laboratory analyses of several different sample media. For the sake of brevity, many field site observations have not been included in this volume; these data are, however, available on the magnetic tape. Appendices A and B describe the sample media and summarize the analytical results for each medium. The data have been subdivided by one of the Los Alamos National Laboratory sorting programs of Zinkl and others (1981a) into groups of stream-sediment and lake-sediment samples. For each group which contains a sufficient number of observations, statistical tables, tables of raw data, and 1:1,000,000 scale maps of pertinent elements have been included in this report. Also included are maps showing results of multivariate statistical analyses. Information on the field and analytical procedures used by the Los Alamos National Laboratory during sample collection and analysis may be found in any HSSR data release prepared by the Laboratory (see, for example, Planner and others, 1981), and will not be included in this report.

  11. Superfund explanation of significant difference for the record of decision (EPA region 2): Love Canal, Niagara Falls, NY, September 5, 1996

    SciTech Connect (OSTI)

    1997-11-01

    The United States Environmental Protection Agency (EPA) and the New York State Department of Environmental Conservation (NYSDEC) announce this Explanation of Significant Differences (ESD) to explain modifications to the selected remedy for the final destruction and disposal of Love Canal dioxin-contaminated sewer and creek sediments. These modifications are embodied in proposed changes to a partial consent decree between the United States and the State of New York and the Occidental Chemical Corporation (OCC) in the United States District Court for the Western District of New York.

  12. Geohydrology of the Keechi, Mount Sylvan, Oakwood, and Palestine salt domes in the northeast Texas salt-dome basin

    SciTech Connect (OSTI)

    Carr, J.E.; Halasz, S.J.; Peters, H.B.

    1980-01-01

    The salt within these domes has penetrated as much as 20,000 feet of Mesozoic and Cenozoic strata, and presently extends to within 120 to 800 feet of the land surface. The salt penetrates or closely underlies major freshwater and salinewater aquifers within the basin. To provide a safe repository for radioactive wastes within one or more of these domes, a thorough understanding of the geohydrology needs to be obtained, and the hydrologic stability of the domes needs to be established for the expected life of the storage facility. Dissolution may exist at all four candidate salt domes, possibly through contact with Cretaceous or Tertiary aquifers, or through fault systems in the vicinity of the domes. Strata overlying and surrounding Palestine and Keechi Salt Domes have been arched into steeply-dipping folds that are complexly faulted. Similar conditions exist at Oakwood and Mount Sylvan Domes, except that the Tertiary strata have been only moderately disturbed. Additional problems concerning the hydrologic stability of Oakwood and Palestine Salt Domes have resulted from the disposal of oil-field salinewater in the cap rock at the Oakwood Dome and previous solution mining of salt at the Palestine Dome.

  13. Heat exchanger tube mounts

    DOE Patents [OSTI]

    Wolowodiuk, W.; Anelli, J.; Dawson, B.E.

    1974-01-01

    A heat exchanger in which tubes are secured to a tube sheet by internal bore welding is described. The tubes may be moved into place in preparation for welding with comparatively little trouble. A number of segmented tube support plates are provided which allow a considerable portion of each of the tubes to be moved laterally after the end thereof has been positioned in preparation for internal bore welding to the tube sheet. (auth)

  14. Manipulator mounted transfer platform

    DOE Patents [OSTI]

    Dobbins, James C.; Hoover, Mark A.; May, Kay W.; Ross, Maurice J.

    1990-01-01

    A transfer platform for the conveyance of objects by a manipulator includes a bed frame and saddle clamp secured along an edge of the bed frame and adapted so as to secure the bed frame to a horizontal crosspiece of the manipulator. The platform may thus move with the manipulator in a reciprocal linear path defined by a guide rail. A bed insert may be provided for the support of conveyed objects and a lifting bail may be provided to permit the manipulator arm to install the bed frame upon the crosspiece under remote control.

  15. Ceramic combustor mounting

    DOE Patents [OSTI]

    Hoffman, Melvin G.; Janneck, Frank W.

    1982-01-01

    A combustor for a gas turbine engine includes a metal engine block including a wall portion defining a housing for a combustor having ceramic liner components. A ceramic outlet duct is supported by a compliant seal on the metal block and a reaction chamber liner is stacked thereon and partly closed at one end by a ceramic bypass swirl plate which is spring loaded by a plurality of circumferentially spaced, spring loaded guide rods and wherein each of the guide rods has one end thereof directed exteriorly of a metal cover plate on the engine block to react against externally located biasing springs cooled by ambient air and wherein the rod spring support arrangement maintains the stacked ceramic components together so that a normal force is maintained on the seal between the outlet duct and the engine block under all operating conditions. The support arrangement also is operative to accommodate a substantial difference in thermal expansion between the ceramic liner components of the combustor and the metal material of the engine block.

  16. Inboard seal mounting

    DOE Patents [OSTI]

    Hayes, John R.

    1983-01-01

    A regenerator assembly for a gas turbine engine has a hot side seal assembly formed in part by a cast metal engine block having a seal recess formed therein that is configured to supportingly receive ceramic support blocks including an inboard face thereon having a regenerator seal face bonded thereto. A pressurized leaf seal is interposed between the ceramic support block and the cast metal engine block to bias the seal wear face into sealing engagement with a hot side surface of a rotary regenerator matrix.

  17. Apparatus for mounting crystal

    DOE Patents [OSTI]

    Longeway, Paul A.

    1985-01-01

    A thickness monitor useful in deposition or etching reactor systems comprising a crystal-controlled oscillator in which the crystal is deposited or etched to change the frequency of the oscillator. The crystal rests within a thermally conductive metallic housing and arranged to be temperature controlled. Electrode contacts are made to the surface primarily by gravity force such that the crystal is substantially free of stress otherwise induced by high temperature.

  18. Nicaragua Canal Template

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - CHAPTER 1 This page intentionally left blank First Responder Network Authority Nationwide Public Safety Broadband Network Draft Programmatic Environmental Impact Statement for the Eastern United States VOLUME 1 - CHAPTER 1 Amanda Goebel Pereira, AICP NEPA Coordinator First Responder Network Authority U.S. Department of Commerce 12201 Sunrise Valley Dr. M/S 243 Reston, VA 20192 Cooperating Agencies Federal Communications Commission General Services Administration U.S. Department of

  19. Nicaragua Canal Template

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - CHAPTER 2 This page intentionally left blank First Responder Network Authority Nationwide Public Safety Broadband Network Draft Programmatic Environmental Impact Statement for the Eastern United States VOLUME 1 - CHAPTER 2 Amanda Goebel Pereira, AICP NEPA Coordinator First Responder Network Authority U.S. Department of Commerce 12201 Sunrise Valley Dr. M/S 243 Reston, VA 20192 Cooperating Agencies Federal Communications Commission General Services Administration U.S. Department of

  20. Nicaragua Canal Template

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 This page intentionally left blank Nationwide Public Safety Broadband Network Draft Programmatic Environmental Impact Statement for the Eastern United States VOLUME 15 - CHAPTER 21 April 2016 First Responder Network Authority Amanda Goebel Pereira, AICP NEPA Coordinator First Responder Network Authority U.S. Department of Commerce 12201 Sunrise Valley Dr. M/S 243 Reston, VA 20192 Cooperating Agencies Federal Communications Commission General Services Administration U.S. Department of

  1. Nicaragua Canal Template

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Canada, Mexico, Japan, and Russia. The MBTA prohibits the take, possession, import, export, transport, selling, ... floodplains and to avoid direct and indirect support of ...

  2. Nicaragua Canal Template

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    School Amanda Pereira M.S., Urban and Regional Planning, University of ... University Genevieve Walker B.A., Geology, Florida International University BOOZ ...

  3. Nicaragua Canal Template

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... 30 1500-100,000 -- -- 1.0 30 Source: (FCC 1996) ffrequency in MHz *Plane-wave equivalent power density 2.4.3. Overview of Research for Potential Non-Thermal Effects to Humans ...

  4. Portable mass spectrometer with one or more mechanically adjustable electrostatic sectors and a mechanically adjustable magnetic sector all mounted in a vacuum chamber

    DOE Patents [OSTI]

    Andresen, B.D.; Eckels, J.D.; Kimmons, J.F.; Martin, W.H.; Myers, D.W.; Keville, R.F.

    1992-10-06

    A portable mass spectrometer is described having one or more electrostatic focusing sectors and a magnetic focusing sector, all of which are positioned inside a vacuum chamber, and all of which may be adjusted via adjustment means accessible from outside the vacuum chamber. Mounting of the magnetic sector entirely within the vacuum chamber permits smaller magnets to be used, thus permitting reductions in both weight and bulk. 13 figs.

  5. Portable mass spectrometer with one or more mechanically adjustable electrostatic sectors and a mechanically adjustable magnetic sector all mounted in a vacuum chamber

    DOE Patents [OSTI]

    Andresen, Brian D.; Eckels, Joel D.; Kimmons, James F.; Martin, Walter H.; Myers, David W.; Keville, Robert F.

    1992-01-01

    A portable mass spectrometer is described having one or more electrostatic focusing sectors and a magnetic focusing sector, all of which are positioned inside a vacuum chamber, and all of which may be adjusted via adjustment means accessible from outside the vacuum chamber. Mounting of the magnetic sector entirely within the vacuum chamber permits smaller magnets to be used, thus permitting reductions in both weight and bulk.

  6. Geology and mineral resources of the Florence, Beaufort, Rocky Mount, and Norfolk 1/sup 0/ x 2/sup 0/ NTMS quadrangles. National Uranium Resource Evaluation program

    SciTech Connect (OSTI)

    Harris, W.B.

    1982-08-01

    This document provides geologic and mineral resources data for previously-issued Savannah River Laboratory hydrogeochemical and stream sediment reports of the Beaufort, Florence, Norfolk, and Rocky Mount 1/sup 0/ x 2/sup 0/ National Topographic Map Series quadrangles in the southeastern United States. This report is issued in draft form, without detailed technical and copy editing. This was done to make the report available to the public before the end of the National Uranium Resource Evaluation program.

  7. Regional long-term production modeling from a single well test, Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope

    SciTech Connect (OSTI)

    Anderson, Brian J.; Kurihara, Masanori; White, Mark D.; Moridis, George J.; Wilson, Scott J.; Pooladi-Darvish, Mehran; Gaddipati, Manohar; Masuda, Yoshihiro; Collett, Timothy S.; Hunter, Robert B.; Narita, Hideo; Rose, Kelly; Boswell, Ray

    2011-02-01

    Following the results from the open-hole formation pressure response test in the BPXA-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well (Mount Elbert well) using Schlumberger's Modular Dynamics Formation Tester (MDT) wireline tool, the International Methane Hydrate Reservoir Simulator Code Comparison project performed long-term reservoir simulations on three different model reservoirs. These descriptions were based on 1) the Mount Elbert gas hydrate accumulation as delineated by an extensive history-matching exercise, 2) an estimation of the hydrate accumulation near the Prudhoe Bay L-pad, and 3) a reservoir that would be down-dip of the Prudhoe Bay L-pad and therefore warmer and deeper. All of these simulations were based, in part, on the results of the MDT results from the Mount Elbert Well. The comparison group's consensus value for the initial permeability of the hydrate-filled reservoir (k = 0.12 mD) and the permeability model based on the MDT history match were used as the basis for subsequent simulations on the three regional scenarios. The simulation results of the five different simulation codes, CMG STARS, HydrateResSim, MH-21 HYDRES, STOMP-HYD, and TOUGH+HYDRATE exhibit good qualitative agreement and the variability of potential methane production rates from gas hydrate reservoirs is illustrated. As expected, the predicted methane production rate increased with increasing in situ reservoir temperature; however, a significant delay in the onset of rapid hydrate dissociation is observed for a cold, homogeneous reservoir and it is found to be repeatable. The inclusion of reservoir heterogeneity in the description of this cold reservoir is shown to eliminate this delayed production. Overall, simulations utilized detailed information collected across the Mount Elbert reservoir either obtained or determined from geophysical well logs, including thickness (37 ft), porosity (35%), hydrate saturation (65%), intrinsic permeability (1000 mD), pore water

  8. Magnetic Resonance Imaging Assessment of Squamous Cell Carcinoma of the Anal Canal Before and After Chemoradiation: Can MRI Predict for Eventual Clinical Outcome?

    SciTech Connect (OSTI)

    Goh, Vicky; Gollub, Frank K.; Liaw, Jonathan; Wellsted, David; Przybytniak, Izabela; Padhani, Anwar R.; Glynne-Jones, Rob

    2010-11-01

    Purpose: To describe the MRI appearances of squamous cell carcinoma of the anal canal before and after chemoradiation and to assess whether MRI features predict for clinical outcome. Methods and Materials: Thirty-five patients (15 male, 20 female; mean age 60.8 years) with histologically proven squamous cell cancer of the anal canal underwent MRI before and 6-8 weeks after definitive chemoradiation. Images were reviewed retrospectively by two radiologists in consensus blinded to clinical outcome: tumor size, signal intensity, extent, and TNM stage were recorded. Following treatment, patients were defined as responders by T and N downstaging and Response Evaluation Criteria in Solid Tumors (RECIST). Final clinical outcome was determined by imaging and case note review: patients were divided into (1) disease-free and (2) with relapse and compared using appropriate univariate methods to identify imaging predictors; statistical significance was at 5%. Results: The majority of tumors were {<=}T2 (23/35; 65.7%) and N0 (21/35; 60%), mean size 3.75cm, and hyperintense (++ to +++, 24/35 patients; 68%). Following chemoradiation, there was a size reduction in all cases (mean 73.3%) and a reduction in signal intensity in 26/35 patients (74.2%). The majority of patients were classified as responders (26/35 (74.2%) patients by T and N downstaging; and 30/35 (85.7%) patients by RECIST). At a median follow-up of 33.5 months, 25 patients (71.4%) remained disease-free; 10 patients (28.6%) had locoregional or metastatic disease. Univariate analysis showed that no individual MRI features were predictive of eventual outcome. Conclusion: Early assessment of response by MRI at 6-8 weeks is unhelpful in predicting future clinical outcome.

  9. Method and device for determining the position of a cutting tool relative to the rotational axis of a spindle-mounted workpiece

    DOE Patents [OSTI]

    Williams, Richard R.

    1982-01-01

    The present invention is directed to a method and device for determining the location of a cutting tool with respect to the rotational axis of a spindle-mounted workpiece. A vacuum cup supporting a machinable sacrifical pin is secured to the workpiece at a location where the pin will project along and encompass the rotational axis of the workpiece. The pin is then machined into a cylinder. The position of the surface of the cutting tool contacting the machine cylinder is spaced from the rotational aixs of the workpiece a distance equal to the radius of the cylinder.

  10. Method and device for determining the position of a cutting tool relative to the rotational axis of a spindle-mounted workpiece

    DOE Patents [OSTI]

    Williams, R.R.

    1980-09-03

    The present invention is directed to a method and device for determining the location of a cutting tool with respect to the rotational axis of a spindle-mounted workpiece. A vacuum cup supporting a machinable sacrificial pin is secured to the workpiece at a location where the pin will project along and encompass the rotational axis of the workpiece. The pin is then machined into a cylinder. The position of the surface of the cutting tool contacting the machine cylinder is spaced from the rotational axis of the workpiece a distance equal to the radius of the cylinder.

  11. Water-quality data for aquifers, streams, and lakes in the vicinity of Keechi, Mount Sylvan, Oakwood, and Palestine salt domes, northeast Texas salt-dome basin

    SciTech Connect (OSTI)

    Carr, J.E.; Halasz, S.J.; Liscum, F.

    1980-11-01

    This report contains water-quality data for aquifers, streams, and lakes in the vicinity of Keechi, Mount Sylvan, Oakwood, and Palestine Salt Domes in the northeast Texas salt-dome basin. Water-quality data were compiled for aquifers in the Wilcox Group, the Carrizo Sand, and the Queen City Sand. The data include analyses for dissolved solids, pH, temperature, hardness, calcium, magnesium, sodium, bicarbonate, chloride, and sulfate. Water-quality and streamflow data were obtained from 63 surface-water sites in the vicinity of the domes. These data include water discharge, specific conductance, pH, water temperature, and dissolved oxygen. Samples were collected at selected sites for analysis of principal and selected minor dissolved constituents.

  12. CASL-U-2015-0123-000 Tom Downar

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the LWR-PROTEUS project-an extended validation program for advanced light water reactor core analysis tools conducted at the Paul Scherrer Institute-the radial, internal...

  13. Tom Green County, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Green County, Texas: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 31.3839017, -100.439656 Show Map Loading map... "minzoom":false,"mappingse...

  14. Tomé wins Distinguished Scientist, Engineer Award

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Department of Energy Tomorrow: Watch The White House Forum on Minorities in Energy Livestream Tomorrow: Watch The White House Forum on Minorities in Energy Livestream November 12, 2013 - 4:33pm Addthis Fisk University graduate student, George Turner conducting research at the Lawrence Livermore National Laboratory. | Photo courtesy of Lawrence Livermore National Laboratory. Fisk University graduate student, George Turner conducting research at the Lawrence Livermore National Laboratory. |

  15. Microsoft Word - Department of Energy QER Remarks Tom King FINAL...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... The commodity portion of our Massachusetts retail electric customers' bills was up by 35 percent compared to the year before. And we anticipate 40 percent over that for next ...

  16. From: Gene Grace To: Congestion Study Comments Cc: Tom Vinson...

    Energy Savers [EERE]

    STATEMENT OF CONFIDENTIALITY & DISCLAIMER: AWEA considers the information contained in this email message and its attachments to be confidential, proprietary, or privileged to ...

  17. Analysis of core samples from the BPXA-DOE-USGS Mount Elbert gas hydrate stratigraphic test well: Insights into core disturbance and handling

    SciTech Connect (OSTI)

    Kneafsey, Timothy J.; Lu, Hailong; Winters, William; Boswell, Ray; Hunter, Robert; Collett, Timothy S.

    2009-09-01

    Collecting and preserving undamaged core samples containing gas hydrates from depth is difficult because of the pressure and temperature changes encountered upon retrieval. Hydrate-bearing core samples were collected at the BPXA-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well in February 2007. Coring was performed while using a custom oil-based drilling mud, and the cores were retrieved by a wireline. The samples were characterized and subsampled at the surface under ambient winter arctic conditions. Samples thought to be hydrate bearing were preserved either by immersion in liquid nitrogen (LN), or by storage under methane pressure at ambient arctic conditions, and later depressurized and immersed in LN. Eleven core samples from hydrate-bearing zones were scanned using x-ray computed tomography to examine core structure and homogeneity. Features observed include radial fractures, spalling-type fractures, and reduced density near the periphery. These features were induced during sample collection, handling, and preservation. Isotopic analysis of the methane from hydrate in an initially LN-preserved core and a pressure-preserved core indicate that secondary hydrate formation occurred throughout the pressurized core, whereas none occurred in the LN-preserved core, however no hydrate was found near the periphery of the LN-preserved core. To replicate some aspects of the preservation methods, natural and laboratory-made saturated porous media samples were frozen in a variety of ways, with radial fractures observed in some LN-frozen sands, and needle-like ice crystals forming in slowly frozen clay-rich sediments. Suggestions for hydrate-bearing core preservation are presented.

  18. Examination of core samples from the Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope: Effects of retrieval and preservation

    SciTech Connect (OSTI)

    Kneafsey, T.J.; Liu, T.J. H.; Winters, W.; Boswell, R.; Hunter, R.; Collett, T.S.

    2011-06-01

    Collecting and preserving undamaged core samples containing gas hydrates from depth is difficult because of the pressure and temperature changes encountered upon retrieval. Hydrate-bearing core samples were collected at the BPXA-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well in February 2007. Coring was performed while using a custom oil-based drilling mud, and the cores were retrieved by a wireline. The samples were characterized and subsampled at the surface under ambient winter arctic conditions. Samples thought to be hydrate bearing were preserved either by immersion in liquid nitrogen (LN), or by storage under methane pressure at ambient arctic conditions, and later depressurized and immersed in LN. Eleven core samples from hydrate-bearing zones were scanned using x-ray computed tomography to examine core structure and homogeneity. Features observed include radial fractures, spalling-type fractures, and reduced density near the periphery. These features were induced during sample collection, handling, and preservation. Isotopic analysis of the methane from hydrate in an initially LN-preserved core and a pressure-preserved core indicate that secondary hydrate formation occurred throughout the pressurized core, whereas none occurred in the LN-preserved core, however no hydrate was found near the periphery of the LN-preserved core. To replicate some aspects of the preservation methods, natural and laboratory-made saturated porous media samples were frozen in a variety of ways, with radial fractures observed in some LN-frozen sands, and needle-like ice crystals forming in slowly frozen clay-rich sediments. Suggestions for hydrate-bearing core preservation are presented.

  19. Analysis of long-period seismic waves excited by the May 18, 1980, eruption of Mount St. Helens: a terrestrial monopole

    SciTech Connect (OSTI)

    Kanamori, H.; Given, J.W.

    1982-07-10

    Long-period (100 to 260 s) Love and Rayleigh waves excited by the eruption of Mount St. Helens on May 18, 1980, and recorded by ID, SRO, and ASRO stations were analyzed to determine the mechanism of the eruption. The amplitude radiation patterns of both Rayleigh and Love waves are two lobed with nodal direction in E5/sup 0/S for Rayleigh waves and in N5/sup 0/E for Love waves. These radiation patterns preclude any double-couple mechanism. The radiation pattern, the initial phase, the relatively large amplitude ratio of Love to Rayleigh waves and the existence of clear nodes in the radiation patterns of fundamental mode and higher-mode Rayleigh waves suggest that the source is represented by an almost horizontal (less than 15/sup 0/ from the horizontal) single force pointed toward S5/sup 0/W. The surface wave spectra fall off very rapidly at periods shorter than 75 s suggesting a very slow source process. Although the details of the source time history could not be determined, a smooth bell-shaped time function: f/sub 0/s(t) = (1/2)f/sub 0/(1-cos( (t)/(tau) ..pi..)) for 0< or =t< or =2tau and f/sub 0/s(t) = 0 for t> or =2tau, with tau = 75 s is considered appropriate on the basis of comparison between synthetic and observed seismograms and of the shape of the source spectrum. The peak value of the force f/sub 0/ is about 10/sup 18/ dynes. The tailing end of the source time function could not be resolved, and some overshoot may be added. The magnitude and the time history of the force can be explained by a northward landslide followed by a lateral blast observed at the time of the eruption. Two distinct events about 110 apart can be identified on body wave and short-period surface wave records. The first event may correspond to the earthquake which triggered the landslide and the lateral blast. The second event appears to correspond to a second large earthquake and explosion which took place about 2 minutes after the first earthquake.

  20. Hydromechanical transmission with three simple planetary assemblies, one sun gear being mounted on the output shaft and the other two on a common shaft connected to an input-driven hydraulic module

    DOE Patents [OSTI]

    Orshansky, Jr., deceased, Elias; Weseloh, William E.

    1978-01-01

    A power transmission having three simple planetary assemblies, each having its own carrier and its own planet, sun, and ring gears. A speed-varying module is connected in driving relation to the input shaft and in driving relationship to the sun gears of the first two planetary assemblies, these two sun gears being connected together on a common shaft. The speed-varying means may comprise a pair of hydraulic units hydraulically interconnected so that one serves as a pump while the other serves as a motor and vice versa, one of the units having a variable stroke and being connected in driving relation to the input shaft, the other unit, which may have a fixed stroke, being connected in driving relation to the sun gears. The input shaft is also connected to drive the second ring gear and, furthermore is clutchable to the carrier of the third planetary assembly. A brake grounds the first carrier in the first range and in reverse and causes drive to be delivered to the output through the first ring gear in a hydrostatic mode. The carrier of the second planetary assembly drives the ring gear of the third planetary assembly, which is clutchable to the output shaft, and the sun gear of the third planetary assembly is mounted rigidly to the output shaft.

  1. Fiber optic mounted laser driven flyer plates

    SciTech Connect (OSTI)

    Paisley, D.L.

    1990-12-31

    This invention is comprised of a laser driven flyer plate where the flyer plate is deposited directly onto the squared end of an optical fiber. The plasma generated by a laser pulse drives the flyer plate toward a target. In another embodiment, a first metal layer is deposited onto the squared end of an optical fiber, followed by a layer of a dielectric material and a second metal layer. The laser pulse generates a plasma in the first metal layer, but the plasma is kept away from the second metal layer by the dielectric layer until the pressure reaches the point where shearing occurs. 2 figs.

  2. Fiber optic mounted laser driven flyer plates

    SciTech Connect (OSTI)

    Paisley, D.L.

    1991-07-09

    A laser driven flyer plate is described where the flyer plate is deposited directly onto the squared end of an optical fiber. The plasma generated by a laser pulse drives the flyer plate toward a target. In another embodiment, a first metal layer is deposited onto the squared end of an optical fiber, followed by a layer of a dielectric material and a second metal layer. The laser pulse generates a plasma in the first metal layer, but the plasma is kept away from the second metal layer by the dielectric layer until the pressure reaches the point where shearing occurs.

  3. Fiber optic mounted laser driven flyer plates

    SciTech Connect (OSTI)

    Paisley, D.L.

    1990-01-01

    This invention is comprised of a laser driven flyer plate where the flyer plate is deposited directly onto the squared end of an optical fiber. The plasma generated by a laser pulse drives the flyer plate toward a target. In another embodiment, a first metal layer is deposited onto the squared end of an optical fiber, followed by a layer of a dielectric material and a second metal layer. The laser pulse generates a plasma in the first metal layer, but the plasma is kept away from the second metal layer by the dielectric layer until the pressure reaches the point where shearing occurs. 2 figs.

  4. Mount Wachusetts Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    CEI - Iberdrola Energy Purchaser Princeton Municipal Light Location Near Princeton MA Coordinates 42.588458, -71.98387 Show Map Loading map... "minzoom":false,"mappingse...

  5. Photovoltaic array mounting apparatus, systems, and methods

    SciTech Connect (OSTI)

    West, Jack Raymond; Atchley, Brian; Hudson, Tyrus Hawkes; Johansen, Emil

    2015-04-14

    A photovoltaic array, including: (a) supports laid out on a surface in rows and columns; (b) photovoltaic modules positioned on top of the supports; and (c) fasteners connecting the photovoltaic modules to the supports, wherein the supports have an upper pedestal surface and a lower pedestal surface such that the photovoltaic modules are positioned at a non-horizontal angle when edges of the photovoltaic modules are positioned on top of the upper and lower pedestal surfaces, and wherein a portion of the fasteners rotate to lock the photovoltaic modules onto the supports.

  6. Photovoltaic array mounting apparatus, systems, and methods

    DOE Patents [OSTI]

    West, Jack Raymond; Atchley, Brian; Hudson, Tyrus Hawkes; Johansen, Emil

    2016-01-05

    A photovoltaic array, including: (a) supports laid out on a surface in rows and columns; (b) photovoltaic modules positioned on top of the supports; and (c) fasteners connecting the photovoltaic modules to the supports, wherein the supports have an upper pedestal surface and a lower pedestal surface such that the photovoltaic modules are positioned at a non-horizontal angle when edges of the photovoltaic modules are positioned on top of the upper and lower pedestal surfaces, and wherein a portion of the fasteners rotate to lock the photovoltaic modules onto the supports.

  7. Laboratory Performance Testing of Residential Window Mounted...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This presentation was delivered at the U.S. Department of Energy Building America Technical Update meeting on April 29-30, 2013, in Denver, Colorado. PDF icon testingresidentiala...

  8. Photovoltaic array mounting apparatus, systems, and methods ...

    Office of Scientific and Technical Information (OSTI)

    a clip comprising an arm and a notch, where the apparatus resists wind forces and seismic forces and creates a grounding electrical bond between the PV module, support, and clip. ...

  9. Mount Amiata Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    World Geothermal Power Generation 2001-2005. Proceedings of World Geothermal Congress; Turkey: World Geothermal Congress. List of existing Geothermal Resource Areas. Print PDF...

  10. Mount Spurr Geothermal Project | Open Energy Information

    Open Energy Info (EERE)

    ectangles":,"copycoords":false,"static":false,"wmsoverlay":"","layers":,"controls":"pan","zoom","type","scale","streetview","zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoi...

  11. Fiber optic mounted laser driven flyer plates

    DOE Patents [OSTI]

    Paisley, Dennis L. (Santa Fe, NM)

    1991-01-01

    A laser driven flyer plate where the flyer plate is deposited directly onto the squared end of an optical fiber. The plasma generated by a laser pulse drives the flyer plate toward a target. In another embodiment, a first metal layer is deposited onto the squared end of an optical fiber, followed by a layer of a dielectric material and a second metal layer. The laser pulse generates a plasma in the first metal layer, but the plasma is kept away from the second metal layer by the dielectric layer until the pressure reaches the point where shearing occurs.

  12. X-ray CT Observations of Methane Hydrate Distribution Changes over Time in a Natural Sediment Core from the BPX-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well

    SciTech Connect (OSTI)

    Kneafsey, T.J.; Rees, E.V.L.

    2010-03-01

    When maintained under hydrate-stable conditions, methane hydrate in laboratory samples is often considered a stable and immobile solid material. Currently, there do not appear to be any studies in which the long-term redistribution of hydrates in sediments has been investigated in the laboratory. These observations are important because if the location of hydrate in a sample were to change over time (e.g. by dissociating at one location and reforming at another), the properties of the sample that depend on hydrate saturation and pore space occupancy would also change. Observations of hydrate redistribution under stable conditions are also important in understanding natural hydrate deposits, as these may also change over time. The processes by which solid hydrate can move include dissociation, hydrate-former and water migration in the gas and liquid phases, and hydrate formation. Chemical potential gradients induced by temperature, pressure, and pore water or host sediment chemistry can drive these processes. A series of tests were performed on a formerly natural methane-hydrate-bearing core sample from the BPX-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well, in order to observe hydrate formation and morphology within this natural sediment, and changes over time using X-ray computed tomography (CT). Long-term observations (over several weeks) of methane hydrate in natural sediments were made to investigate spatial changes in hydrate saturation in the core. During the test sequence, mild buffered thermal and pressure oscillations occurred within the sample in response to laboratory temperature changes. These oscillations were small in magnitude, and conditions were maintained well within the hydrate stability zone.

  13. Building America Whole-House Solutions for New Homes: Tom Walsh...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    who worked with Building America research partner BIRA to design HERS 59 homes with ducts in conditioned space in dropped ceiling soffits, extensive air sealing, and extensve...

  14. Tomče Runčevski | Center for Gas SeparationsRelevant to Clean...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    University of California, Berkeley Email: runcevski@berkeley.edu Phone: 510-708-2455 PhD in Materials Chemistry, Max Planck Institute for Solid State Research and Stuttgart ...

  15. Simulation in Particle Physics Rob Roser and Tom LeCompte

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ...2712 2 Geant4 and its importance to High Energy Physics The Process of Transforming Geant4 to ... Big Data * HEP has more simulated than collected data * Approaching O(100) Pbytes ...

  16. New Whole-House Solutions Case Study: Tom Walsh & Co., Portland...

    Energy Savers [EERE]

    the New Columbia neighborhood in Portland, Oregon. Twenty of the homes were built in phase two of the project with the goal of earning the 2,000 federal tax credit for new ...

  17. Neutron and Nuclear Science To/MS: Distribution From/MS: Stephen...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    I. LANSCE-NS Additional Duty Assignments ALARA Coordinator Ron Nelson Crane Coordinator ... E4. Curriculum: Qualified Crane Operator Training Requirements Curriculum 123 Name Z ...

  18. NNSA Administrator Tom D'Agostino's speech at the 2009 ISM Conference

    ScienceCinema (OSTI)

    Thomas D'Agostino

    2010-09-01

    National Nuclear Security Administration Administrator Thomas DAgostino addressed the 2009 Department of Energy Integrated Safety Management (ISM) Conference in Knoxville, Tenn., on Wednesday, Aug. 26. In his remarks, Administrator DAgostino highlighted the NNSAs track record of developing innovative approaches to workplace safety. And, while he noted the improvements in NNSAs safety record over the years, the Administrator highlighted the need to ensure that workers across the nuclear security enterprise never become complacent in their approach to safety.

  19. NedPower Mount Storm Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Shell Wind EnergyDominion Energy Developer NedPowerShell Wind EnergyDominion Energy...

  20. Permanent magnet energy conversion machine with magnet mounting arrangement

    DOE Patents [OSTI]

    Hsu, John S.; Adams, Donald J.

    1999-01-01

    A hybrid permanent magnet dc motor includes three sets of permanent magnets supported by the rotor and three sets of corresponding stators fastened to the surrounding frame. One set of magnets operates across a radial gap with a surrounding radial gap stator, and the other two sets of magnets operate off the respective ends of the rotor across respective axial gaps.

  1. Electric And Electromagnetic Outline Of The Mount Somma-Vesuvius...

    Open Energy Info (EERE)

    again a conductive zone, not only including the whole Somma caldera but also extending towards the Tyrrhenian sea. A roughly N-S-trending narrow fracture system, cutting the...

  2. Pioneering the New Grid: Pole-mounted Solar

    Broader source: Energy.gov [DOE]

    Innovative new systems not only generate energy through a solar panel that feeds into the grid, but they are also equipped with communications capabilities.

  3. Mount Princeton Hot Springs Pool & Spa Low Temperature Geothermal...

    Open Energy Info (EERE)

    ,"icon":"","group":"","inlineLabel":"","visitedicon":"" Hide Map Temperature 56.0 C 132.0 F Flow 175 gpm 663 Lmin Capacity 0.40x106 Btuhr 0.100 MWt Annual Generation...

  4. Integrated head package for top mounted nuclear instrumentation

    DOE Patents [OSTI]

    Malandra, Louis J.; Hornak, Leonard P.; Meuschke, Robert E.

    1993-01-01

    A nuclear reactor such as a pressurized water reactor has an integrated head package providing structural support and increasing shielding leading toward the vessel head. A reactor vessel head engages the reactor vessel, and a control rod guide mechanism over the vessel head raises and lowers control rods in certain of the thimble tubes, traversing penetrations in the reactor vessel head, and being coupled to the control rods. An instrumentation tube structure includes instrumentation tubes with sensors movable into certain thimble tubes disposed in the fuel assemblies. Couplings for the sensors also traverse penetrations in the reactor vessel head. A shroud is attached over the reactor vessel head and encloses the control rod guide mechanism and at least a portion of the instrumentation tubes when retracted. The shroud forms a structural element of sufficient strength to support the vessel head, the control rod guide mechanism and the instrumentation tube structure, and includes radiation shielding material for limiting passage of radiation from retracted instrumentation tubes. The shroud is thicker at the bottom adjacent the vessel head, where the more irradiated lower ends of retracted sensors reside. The vessel head, shroud and contents thus can be removed from the reactor as a unit and rested safely and securely on a support.

  5. Mount Hope, Kansas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hope, Kansas: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 37.8686224, -97.665047 Show Map Loading map... "minzoom":false,"mappingservice":"...

  6. Mount Nittany Elementary School Wind Turbine | Open Energy Information

    Open Energy Info (EERE)

    - Yankton School District Wind Project

  7. Mount Chase, Maine: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 46.0777595, -68.4894535 Show Map Loading map... "minzoom":false,"mappingservice":"googlemaps3","type"...

  8. Apparatus tube configuration and mounting for solid oxide fuel cells

    DOE Patents [OSTI]

    Zymboly, Gregory E. (Murrysville, PA)

    1993-01-01

    A generator apparatus (10) is made containing long, hollow, tubular, fuel cells containing an inner air electrode (64), an outer fuel electrode (56), and solid electrolyte (54) therebetween, placed between a fuel distribution board (29) and a board (32) which separates the combustion chamber (16) from the generating chamber (14), where each fuel cell has an insertable open end and in insertable, plugged, closed end (44), the plugged end being inserted into the fuel distribution board (29) and the open end being inserted through the separator board (32) where the plug (60) is completely within the fuel distribution board (29).

  9. Direct mounted photovoltaic device with improved side clip

    SciTech Connect (OSTI)

    Keenihan, James R; Boven, Michelle L; Brown, Jr., Claude; Eurich, Gerald K; Gaston, Ryan S; Hus, Michael

    2013-11-19

    The present invention is premised upon a photovoltaic assembly system for securing and/or aligning at least a plurality of vertically adjacent photovoltaic device assemblies to one another. The securing function being accomplished by a clip member that may be a separate component or integral to one or more of the photovoltaic device assemblies.

  10. Direct mounted photovoltaic device with improved front clip

    SciTech Connect (OSTI)

    Keenihan, James R; Boven, Michelle; Brown, Jr., Claude; Gaston, Ryan S; Hus, Michael; Langmaid, Joe A; Lesniak, Mike

    2013-11-05

    The present invention is premised upon a photovoltaic assembly system for securing and/or aligning at least a plurality of vertically adjacent (overlapping) photovoltaic device assemblies to one another. The securing function being accomplished by a clip member that may be a separate component or integral to one or more of the photovoltaic device assemblies.

  11. Method for mounting laser fusion targets for irradiation

    DOE Patents [OSTI]

    Fries, R. Jay; Farnum, Eugene H.; McCall, Gene H.

    1977-07-26

    Methods for preparing laser fusion targets of the ball-and-disk type are disclosed. Such targets are suitable for irradiation with one or two laser beams to produce the requisite uniform compression of the fuel material.

  12. A new day: SWiFT reaches rotor mounting milestone

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, ... on one of its SWiFT wind turbines, a heavily modified ...

  13. Mount Macedon, Australia: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    needs updating Image needs updating Reference needed Missing content Broken link Other Additional Comments Cancel Submit Categories: Places Articles with outstanding TODO tasks...

  14. Inner shell radial pin geometry and mounting arrangement

    DOE Patents [OSTI]

    Leach, David; Bergendahl, Peter Allen

    2002-01-01

    Circumferentially spaced arrays of support pins are disposed through access openings in an outer turbine shell and have projections received in recesses in forward and aft sections of an inner turbine shell supported from the outer shell. The projections have arcuate sides in a circumferential direction affording line contacts with the side walls of the recesses and are spaced from end faces of the recesses, enabling radial and axial expansion and contraction of the inner shell relative to the outer shell. All loads are taken up in a tangential direction by the outer shell with the support pins taking no radial loadings.

  15. Constant power speed range extension of surface mounted PM motors

    DOE Patents [OSTI]

    Lawler, Jack Steward; Bailey, John Milton

    2001-01-01

    A circuit and method for controlling a rotating machine (11) in the constant horsepower range above base speed uses an inverter (15) having SCR's (T1-T6) connected in series with the primary commutation switches (Q1-Q6) to control turn off of the primary commutation switches and to protect the primary commutation switches from faults. The primary commutation switches (Q1-Q6) are controlled by a controller (14), to fire in advance or after a time when the back emf equals the applied voltage, and then to turn off after a precise dwell time, such that suitable power is developed at speeds up to at least six times base speed.

  16. Hydrothermal Circulation At Mount St Helens Determined By Self...

    Open Energy Info (EERE)

    and modulated on short time scales by surface recharge. Authors Paul A. Bedrosian, Martyn J. Unsworth and Malcolm J. S. Johnston Published Journal Journal of Volcanology and...

  17. An active seismic reconnaissance survey of the Mount Princeton...

    Open Energy Info (EERE)

    area, Chaffee County, ColoradoThesisDissertation Abstract Abstract unavailable. Author J.S. Crompton Organization Colorado School of Mines Published Publisher Not Provided, 1976...

  18. The Cummins Rocky Mount Engine Plant Case Study | Department...

    Broader source: Energy.gov (indexed) [DOE]

    a 12.6% energy performance improvement after implementing SEP. (July 2015) Cummins' Case Study for Superior Energy Performance More Documents & Publications SEP Case Study...

  19. Temporal Geochemical Variations In Volatile Emissions From Mount...

    Open Energy Info (EERE)

    1980. Based on D modeling, approximately 63% of shallow, post-1980 magma has yet to degas. Surprisingly, Cl and F contents in the 1994 samples were only 0.47 and 3.8%,...

  20. Solar Install Mount Production Labor Equipment Simple Balance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    material reduction Self-squaring Prefabrication Factory assembly Structuralmaterial efficiencies Self-stabilityballasting OUTCOMES Patent Project Contact GUOHUI YUAN Other Grid ...

  1. Sample mounting and transfer for coupling an ultrahigh vacuum...

    Office of Scientific and Technical Information (OSTI)

    40204838 Resource Type: Journal Article Resource Relation: Journal Name: Review of Scientific Instruments; Journal Volume: 72; Journal Issue: 1; Other Information: DOI:...

  2. Laboratory Performance Testing of Residential Window Mounted Air Conditioners

    Broader source: Energy.gov [DOE]

    This presentation was delivered at the U.S. Department of Energy Building America Technical Update meeting on April 29-30, 2013, in Denver, Colorado.

  3. Evolution Of Hydrothermal Waters At Mount St Helens, Washington...

    Open Energy Info (EERE)

    sheets, yet have thus far been largely undocumented. Authors Lisa Shevenell and Fraser Goff Published Journal Journal of Volcanology and Geothermal Research, 1995 DOI Not Provided...

  4. MHK Technologies/Canal Power | Open Energy Information

    Open Energy Info (EERE)

    Technology Resource Click here CurrentTidal Technology Type Click here Axial Flow Turbine Technology Readiness Level Click here TRL 4: Proof of Concept Technology Description...

  5. ARM - Measurement - Aerosol absorption

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    External Instruments OMI : Ozone Monitoring Instrument TOMS : Total Ozone Mapping ... OMI : Ozone Monitoring Instrument Datastreams OMI : Ozone Monitoring Instrument TOMS : ...

  6. Browse by Discipline -- E-print Network Subject Pathways: Power...

    Office of Scientific and Technical Information (OSTI)

    of Organismic and Evolutionary Biology, Harvard University Hjek, Tom (Tom ... of Organismic and Evolutionary Biology, Harvard University Hartley, Stephen (Stephen ...

  7. ARM - 2003 Science Team Meeting Pictures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Janet Inrieri discuss Dave and Tom's poster. ARM Chief Scientist Tom Ackerman, Dave Turner, and Janet Inrieri discuss Dave and Tom's poster. K.N. Liou and Andy Lacis discuss...

  8. Jefferson Lab hosts three prominent science-author book discussions...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    On Wednesday, Nov. 5, at Jefferson Lab, Tom Siegfried, Science Editor for The Dallas ... Space and Time Books by Tom Siegfried The Dallas Morning News About Tom Siegfried Robert ...

  9. Near-Surface imaging of a hydrogeothermal system at Mount Princeton...

    Open Energy Info (EERE)

    3D seismic, self-potential, and dc resistivity data Authors A.P. Lamb, L.M. Liberty, K. van Wijk, A. Revil and C. Diggins Published Journal Society of Exploration...

  10. NedPower Mount Storm II Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Shell Wind EnergyDominion Energy Developer NedPowerShell Wind EnergyDominion Energy...

  11. Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project Scoping and Feasibility

    Office of Energy Efficiency and Renewable Energy (EERE)

    This Sandia National Laboratories study examines the feasibility of a hydrogen-fueled PEM fuel cell barge to provide electrical power to vessels at anchorage or at berth.

  12. Sampling and analysis plan for Mount Plant D & D soils packages, Revision 1

    SciTech Connect (OSTI)

    1991-02-01

    There are currently 682 containers of soils in storage at Mound Plant, generated between April 1 and October 31, 1990 as a result of excavation of soils containing plutonium-238 at two ongoing Decontamination and Decommissioning (D&D) Program sites. These areas are known as Area 14, the waste transfer system (WTS) hillside, and Area 17, the Special Metallurgical (SM) Building area. The soils from these areas are part of Mound Plant waste stream number AMDM-000000010, Contaminated Soil, and are proposed for shipment to the Nevada Test Site (NTS) for disposal as low-level radioactive waste. The sealed waste packages, constructed of either wood or metal, are currently being stored in Building 31 and at other locations throughout the Mound facility. At a meeting in Las Vegas, Nevada on October, 26, 1990, DOE Nevada Operations Office (DOE-NV) and NTS representatives requested that the Mound Plant D&D soils proposed for shipment to NTS be sampled for Toxicity Characteristic Leaching Procedure (TCLP) constituents. On December 14, 1990, DOE-NV also requested that additional analyses be performed on the soils from one of the soils boxes for polychlorinated biphenyls (PCBs), particle size distribution, and free liquids. The purpose of this plan is to document the proposed sampling and analyses of the packages of D&D soils produced prior to October 31, 1990. In order to provide a thorough description of the soils excavated from the WTS and SM areas, sections 1.1 and 1.2 provide historical Information concerning the D&D soils, including waste stream evaluations and past sampling data.

  13. Pattern of shallow ground water flow at Mount Princeton Hot Springs...

    Open Energy Info (EERE)

    Mt. Princeton hot water production (4.3-4.9)103m3day at approximately 60-86C). A temperature map indicates that a third upwelling zone termed U4 may exist at the southern...

  14. Pattern Of Shallow Ground Water Flow At Mount Princeton Hot Springs...

    Open Energy Info (EERE)

    Mt. Princeton hot water production (4.3-4.9) 103 m3day at approximately 60-86C). A temperature map indicates that a third upwelling zone termed U4 may exist at the southern...

  15. Mixed convection heat transfer from thermal sources mounted on horizontal and vertical surfaces

    SciTech Connect (OSTI)

    Tewari, S.S.; Jaluria, Y. )

    1990-11-01

    An experimental study is carried out on the fundamental aspects of the conjugate, mixed convective heat transfer from two finite width heat sources, which are of negligible thickness, have a uniform heat flux input at the surface, and are located on a flat plate in a horizontal or the vertical orientation. The heat sources are wide in the transverse direction and, therefore, a two-dimensional flow circumstance is simulated. The mixed convection parameter is varied over a fairly wide range to include the buoyancy-dominated and the mixed convection regimes. The circumstances of pure natural convection are also investigated. The convective mechanisms have been studied in detail by measuring the surface temperatures and determining the heat transfer coefficients for the two heated strips, which represent isolated thermal sources. Experimental results indicate that a stronger upstream heat source causes an increase in the surface temperature of a relatively weaker heat source, located downstream, by reducing it convective heat transfer coefficient. The influence of the upstream source is found to be strongly dependent on the surface orientation, especially in the pure natural convection and the buoyancy dominated regimes. The two heat sources are found to be essentially independent on the surface orientation, especially in the pure natural convection and the buoyancy dominated regimes. The two heat sources are found to be essentially independent of each other, in terms of thermal effects, at a separation distance of more than about three strip widths for both the orientations. The results obtained are relevant to many engineering applications, such as the cooling of electronic systems, positioning of heating elements in furnaces, and safety considerations in enclosure fires.

  16. Method of mounting a fuel pellet in a laser-excited fusion reactor

    DOE Patents [OSTI]

    Hirsch, Robert L.

    1979-01-01

    Laser irradiation means for irradiating a target, wherein a single laser light beam from a source and a mirror close to the target are used with aperture means for directing laser light to interact with the target over a broad area of the surface, and for protecting the laser light source.

  17. Ventilation efficiencies and thermal comfort results of a desk-edge-mounted task ventilation system

    SciTech Connect (OSTI)

    Faulkner, D.; Fisk, W.J.; Sullivan, D.P.; Lee, S.M.

    2003-09-01

    In chamber experiments, we investigated the ventilation effectiveness and thermal comfort of a task ventilation system with an air supply nozzle located underneath the front edge of a desk and directing air toward a heated mannequin or a human volunteer seated at the desk. The task ventilation system provided outside air, while another ventilation system provided additional space cooling but no outside air. Test variables included the vertical angle of air supply (-15{sup o} to 45{sup o} from horizontal), and the supply flow rate of (3.5 to 6.5 L s{sup -1}). Using the tracer gas step-up and step-down procedures, the measured air change effectiveness (i.e., exhaust air age divided by age of air in the breathing zone) in experiments with the mannequin ranged from 1.4 to 2.7 (median, 1.8), whereas with human subjects the air change effectiveness ranged from 1.3 to 2.3 (median, 1.6). The majority of the air change effectiveness values with the human subjects were less than values with the mannequin at comparable tests. Similarly, the tests run with supply air temperature equal to the room air temperature had lower air change effectiveness values than comparable tests with the supply air temperature lower ({approx}5 C) than the room air temperature. The air change effectiveness values are higher than typically reported for commercially available task ventilation or displacement ventilation systems. Based on surveys completed by the subjects, operation of the task ventilation system did not cause thermal discomfort.

  18. Ventilation efficiencies of a desk-edge-mounted task ventilation system

    SciTech Connect (OSTI)

    Faulkner, David; Fisk, William J.; Sullivan, Douglas P.; Lee, Seung Min

    2002-03-01

    In chamber experiments, we investigated the effectiveness of a task ventilation system with an air supply nozzle located underneath the front edge of a desk and directing air toward a heated mannequin seated at the desk. The task ventilation system provided outside air, while another ventilation system provided additional space cooling but no outside air. Test variables included the vertical angle of air supply (-15{sup o} to 45{sup o} from horizontal), and the supply flow rate of (3.5 to 6.5 L s{sup -1}). Using the tracer gas step-up and step-down procedures, the measured air change effectiveness (i.e., exhaust air age divided by age of air at the mannequin's face) ranged from 1.4 to 2.7, which is higher than typically reported for commercially available task ventilation or displacement ventilation systems.

  19. Control of Surface Mounted Permanent Magnet Motors with Special Application to Fractional-Slot Concentrated Windings

    SciTech Connect (OSTI)

    Lawler, J.S.

    2005-12-21

    It is well known that the ability of the permanent magnet synchronous machine (PMSM) to operate over a wide constant power speed range (CPSR) is dependent upon the machine inductance [1,2,3,4,5]. Early approaches for extending CPSR operation included adding supplementary inductance in series with the motor [1] and the use of anti-parallel thyristor pairs in series with the motor-phase windings [5]. The increased inductance method is compatible with a voltage-source inverter (VSI) controlled by pulse-width modulation (PWM) which is called the conventional phase advance (CPA) method. The thyristor method has been called the dual mode inverter control (DMIC). Neither of these techniques has met with wide acceptance since they both add cost to the drive system and have not been shown to have an attractive cost/benefit ratio. Recently a method has been developed to use fractional-slot concentrated windings to significantly increase the machine inductance [6]. This latest approach has the potential to make the PMSM compatible with CPA without supplemental external inductance. If the performance of such drive is acceptable, then the method may make the PMSM an attractive option for traction applications requiring a wide CPSR. A 30 pole, 6 kW, 6000 maximum revolutions per minute (rpm) prototype of the fractional-slot PMSM design has been developed [7]. This machine has significantly more inductance than is typical of regular PMSMs. The prototype is to be delivered in late 2005 to the Oak Ridge National Laboratory (ORNL) for testing and development of a suitable controller. In advance of the test/control development effort, ORNL has used the PMSM models developed over a number of previous studies to study the steady-state performance of high-inductance PMSM machines with a view towards control issues. The detailed steady-state model developed includes all motor and inverter-loss mechanisms and will be useful in assessing the performance of the dynamic controller to be developed in future work. This report documents the results of this preliminary investigation.

  20. A Prehistoric Lahar-Dammed Lake And Eruption Of Mount Pinatubo...

    Open Energy Info (EERE)

    flows; a post-eruption aftermath of rain-triggered lahars in surrounding drainages and dome-building that fills the caldera; and then another long quiescent period. During and...

  1. ARM 2000

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tom Ackerman Chief Scientist Tom Ackerman Chief Scientist ARM ARM Atmospheric Radiation Measurement Atmospheric Radiation Measurement 2 Outline Outline * Last year's goals * ...

  2. The Business of Energy Efficiency Workshop, October 2011 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Welcome, Workshop Objectives, and Agenda Review Opening Plenary Tom Beierle, Ross & ... Resources Tom Beierle, Ross & Associates Environmental Consulting, LTD Noon - 1:15 p.m. ...

  3. brwtp_tcigcc | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 Toms Creek IGCC Demonstration Project - There is no Project Brief for this project ... Technology Program: Toms Creek IGCC Demonstration Project (Sept 1992) U.S. Department of ...

  4. Secretary Chu's Remarks at Vogtle Nuclear Power Plant -- As Prepared...

    Energy Savers [EERE]

    Tom Fanning, President of Southern Company Paul Bowers, President and Chief Executive Officer of Georgia Power Tom Smith, Chief Executive Officer of Oglethorpe Power Bob Johnston, ...

  5. Recherche du boson de Higgs du nideke standard dans le canal...

    Office of Scientific and Technical Information (OSTI)

    ... Close Cite: Bibtex Format Close 0 pages in this document matching the terms "" Search For Terms: Enter terms in the toolbar above to search the full text of this document for ...

  6. Sampling and Analysis of Pond 2, Pond 5, and the P-Reactor Canal Sediments

    SciTech Connect (OSTI)

    Halverson, N.V.

    1998-11-25

    This report discusses the procedures used to perform the sampling, the methods used to analyze the samples, and the results.

  7. MHK Projects/GCK Technology Cape Cod Canal MA US | Open Energy...

    Open Energy Info (EERE)

    Inc Project Technology *MHK TechnologiesGorlov Helical Turbine Project Licensing Environmental Monitoring and Mitigation Efforts See Tethys << Return to the MHK database...

  8. NNMCAB Combined Committee Agenda: August 2014 Pojoaque

    Broader source: Energy.gov [DOE]

    Agenda for the August 13, 2014 Committee meeting Presentation DOE, Long Term Stewardship Program, Tom Longo

  9. Data Driven EVMS Surveillance Approach

    Office of Energy Efficiency and Renewable Energy (EERE)

    Tom Carney, Vice President, Program Management Processes and Controls, Lockheed Martin Aeronautics March 24, 2016

  10. 2012 SINGLE MOLECULE APPROACHES TO BIOLOGY GORDON RESEARCH CONFERENCE (JULY 15-20, 2012 - MOUNT SNOW RESORT, WEST DOVER VT)

    SciTech Connect (OSTI)

    Fernandez, Julio

    2012-04-20

    Single molecule techniques are rapidly occupying a central role in biological research at all levels. This transition was made possible by the availability and dissemination of robust techniques that use fluorescence and force probes to track the conformation of molecules one at a time, in vitro as well as in live cells. Single-molecule approaches have changed the way many biological problems are studied. These novel techniques provide previously unobtainable data on fundamental biochemical processes that are essential for all forms of life. The ability of single-molecule approaches to avoid ensemble averaging and to capture transient intermediates and heterogeneous behavior renders them particularly powerful in elucidating mechanisms of the molecular systems that underpin the functioning of living cells. Hence, our conference seeks to disseminate the implementation and use of single molecule techniques in the pursuit of new biological knowledge. Topics covered include: Molecular Motors on the Move; Origin And Fate Of Proteins; Physical Principles Of Life; Molecules and Super-resolution Microscopy; Nanoswitches In Action; Active Motion Or Random Diffusion?; Building Blocks Of Living Cells; From Molecular Mechanics To Physiology; Tug-of-war: Force Spectroscopy Of Single Proteins.

  11. Field Test Results of Using a Nacelle-Mounted Lidar for Improving Wind Energy Capture by Reducing Yaw Misalignment (Presentation)

    SciTech Connect (OSTI)

    Fleming, P.; Scholbrock, A.; Wright, A.

    2014-11-01

    Presented at the Nordic Wind Power Conference on November 5, 2014. This presentation describes field-test campaigns performed at the National Wind Technology Center in which lidar technology was used to improve the yaw alignment of the Controls Advanced Research Turbine (CART) 2 and CART3 wind turbines. The campaigns demonstrated that whether by learning a correction function to the nacelle vane, or by controlling yaw directly with the lidar signal, a significant improvement in power capture was demonstrated.

  12. 2011 Quantum Control of Light & Matter Gordon Research Conference (July 31-August 5, 2011, Mount Holyoke College, South Hadley, MA)

    SciTech Connect (OSTI)

    Thomas Weinacht

    2011-08-05

    Quantum control of light and matter is the quest to steer a physical process to a desirable outcome, employing constructive and destructive interference. Three basic questions address feasibility of quantum control: (1) The problem of controllability, does a control field exist for a preset initial and target state; (2) Synthesis, constructively finding the field that leads to the target; and (3) Optimal Control Theory - optimizing the field that carries out this task. These continue to be the fundamental theoretical questions to be addressed in the conference. How to realize control fields in the laboratory is an ongoing challenge. This task is very diverse viewing the emergence of control scenarios ranging from attoseconds to microseconds. How do the experimental observations reflect on the theoretical framework? The typical arena of quantum control is an open environment where much of the control is indirect. How are control scenarios realized in dissipative open systems? Can new control opportunities emerge? Can one null decoherence effects? An ideal setting for control is ultracold matter. The initial and final state can be defined more precisely. Coherent control unifies many fields of physical science. A lesson learned in one field can reflect on another. Currently quantum information processing has emerged as a primary target of control where the key issue is controlling quantum gate operation. Modern nonlinear spectroscopy has emerged as another primary field. The challenge is to unravel the dynamics of molecular systems undergoing strong interactions with the environment. Quantum optics where non-classical fields are to be generated and employed. Finally, coherent control is the basis for quantum engineering. These issues will be under the limelight of the Gordon conference on Quantum Control of Light and Matter.

  13. Process for mounting a protection diode on a vertical multijunction photovoltaic cell structure and photovoltaic cells obtained

    SciTech Connect (OSTI)

    Arnould, J.

    1982-09-07

    In a stack of diodes forming a vertical multijunction photovoltaic cell, an inversely connected diode is firmly secured to this stack with possible insertion of a intermediate wafer made from a conducting material.

  14. Gas Production From a Cold, Stratigraphically Bounded Hydrate Deposit at the Mount Elbert Site, North Slope, Alaska

    SciTech Connect (OSTI)

    Moridis, G.J.; Silpngarmlert, S.; Reagan, M. T.; Collett, T.S.; Zhang, K.

    2009-09-01

    As part of an effort to identify suitable targets for a planned long-term field test, we investigate by means of numerical simulation the gas production potential from unit D, a stratigraphically bounded (Class 3) permafrost-associated hydrate occurrence penetrated in the ount Elbert well on North Slope, Alaska. This shallow, low-pressure deposit has high porosities, high intrinsic permeabilities and high hydrate saturations. It has a low temperature because of its proximity to the overlying permafrost. The simulation results indicate that vertical ells operating at a constant bottomhole pressure would produce at very low rates for a very long period. Horizontal wells increase gas production by almost two orders of magnitude, but production remains low. Sensitivity analysis indicates that the initial deposit temperature is y the far the most important factor determining production performance (and the most effective criterion for target selection) because it controls the sensible heat available to fuel dissociation.

  15. Building America Case Study: Advanced Extended Plate and Beam Wall System in a Cold-Climate House, Mount Joy, Pennsylvania

    SciTech Connect (OSTI)

    2016-01-01

    This report presents the design and evaluation of a innovative wall system. This highly insulated (high-R) light-frame wall system for use above grade in residential buildings is referred to as Extended Plate & Beam (EP&B). The EP&B design is the first of its kind to be featured in a new construction test house (NCTH) for the DOE Building America program. The EP&B wall design integrates standard building methods and common building products to construct a high-R wall that minimizes transition risks and costs to builders. The EP&B design combines optimized framing with integrated rigid foam sheathing to increase the wall system's R-value and reduce thermal bridging. The foam sheathing is installed between the wall studs and structural wood sheathing. The exterior wood sheathing is attached directly to a framing extension formed by extended top and bottom plates. The exterior wood sheathing can dry to the exterior and provides bracing, a clear drainage plane and flashing surface for window and door openings, and a nailing surface for siding attachment. With support of the DOE Building America program, Home Innovation Research Labs partnered with Lancaster County Career and Technology Center (LCCTC) to build a NCTH in Lancaster, PA to demonstrate the EP&B wall design in a cold climate (IECC climate zone 5A). The results of the study confirmed the benefits of the systems and the viability of its integration into the house construction process.

  16. Control of Surface Mounted Permanent Magnet Motors with Special Application to Fractional-Slot Motors with Concentrated Windings

    SciTech Connect (OSTI)

    McKeever, John W; Patil, Niranjan; Lawler, Jack

    2007-07-01

    A 30 pole, 6 kW, and 6000 maximum revolutions per minute (rpm) prototype of the permanent magnet synchronous motor (PMSM) with fractional-slot concentrated windings (FSCW) has been designed, built, and tested at the University of Wisconsin at Madison (UWM). This machine has significantly more inductance than that of regular PMSMs. The prototype was delivered in April 2006 to the Oak Ridge National Laboratory (ORNL) for testing and development of a controller that will achieve maximum efficiency. In advance of the test/control development effort, ORNL has used the PMSM models developed over a number of previous studies to study how steady state performance of high inductance PMSM machines relates to control issues. This report documents the results of this research. The amount of inductance that enables the motor to achieve infinite constant power speed ratio (CPSR) is given by L{sub {infinity}} = E{sub b}/{Omega}{sub b}I{sub R}, where E{sub b} is the root-mean square (rms) magnitude of the line-to-neutral back-electromotive force (emf) at base speed, {Omega}{sub b} is the base speed in electrical radians per second, and I{sub R} is the rms current rating of the motor windings. The prototype machine that was delivered to ORNL has about 1.5 times as much inductance as a typical PMSM with distributed integral slot windings. The inventors of the FSCW method, who designed the prototype machine, remarked that they were 'too successful' in incorporating inductance into their machine and that steps would be taken to modify the design methodology to reduce the inductance to the optimum value. This study shows a significant advantage of having the higher inductance rather than the optimal value because it enables the motor to develop the required power at lower current thereby reducing motor and inverter losses and improving efficiency. The main problem found with high inductance machines driven by a conventional phase advance (CPA) method is that the motor current at high speed depends solely on machine parameters and is virtually independent of the load level and the direct current (dc) supply voltage. Thus, the motor current is virtually the same at no load as at full load resulting in poor efficiency at less than full load conditions. While an inductance higher than the value cited above is warranted, it still does not ensure that the motor current is proportional to load; consequently, the problem of low efficiency at high speed and partial load is not resolved but is only mitigated. A common definition of 'base speed' is the speed at which the voltage applied to the motor armature is equal to the magnitude of the back-emf. The results in this study indicate that the dc supply voltage should be adequate to drive rated current into the motor winding at the specified base speed. At a minimum this requires sufficient voltage to overcome not only the back-emf but also the voltage drop across the internal impedance of the machine. For a high inductance PMSM, the internal impedance at base speed can be considerable and substantial additional voltage is required to overcome the internal voltage drop. It is further shown that even more voltage than the minimum required for injecting rated current at base speed can be beneficial by allowing the required power to be developed at lower current, which reduces losses in the motor and inverter components. Further, it is shown that the current is minimized at a unique speed; consequently, there may be room for optimization if the drive spends a substantial amount of its operating life at a certain speed (for example 60 mph). In this study, fundamental frequency phasor models are developed for a synchronous PMSM and the control systems that drive them is CPA. The models were compared with detailed simulations to show their validity. The result was used to design a traction drive control system with optimized efficiency to drive the fractional-slot motor with concentrated windings. The goal is to meet or exceed the FreedomCAR inverter cost and performance targets.

  17. Contol of Surface Mounted Permanent Magnet Motors with Special Application to Motors with Fractional-Slot Concentrated Windings

    SciTech Connect (OSTI)

    Patil, N.; Lawler, J.S.; McKeever, J.

    2007-07-31

    A 30-pole, 6-kW prototype of a fractional-slot permanent magnet synchronous motor (PMSM) design has been developed to operate at a maximum speed of 6000 rpm [1,2]. This machine has significantly more inductance than regular PMSMs with distributed windings. The prototype was delivered in April 2006 to the Oak Ridge National Laboratory (ORNL) for testing and development of a suitable controller. To prepare for this test/control development effort, ORNL used PMSM models developed over a number of previous studies to preview the control issues that arise when a dynamic controller drives a high inductance PMSM machine during steady state performance evaluations. The detailed steady state model developed includes all motor and inverter loss mechanisms and was useful for assessing the performance of the dynamic controller before it was put into operation. This report documents the results of tests demonstrating the effectiveness of ORNL's simple low-cost control scheme during characterization of the fractional-slot concentrated windings (FSCW) PMSM motor. The control scheme is simple because only the supply voltage magnitude and the phase angle between the back-electromotive force (emf) and the supply voltage is controlled. It is low-cost because it requires no current or phase voltage sensors.

  18. Independent wheel suspension system using constant velocity universal joints in combination with a single prop shaft joint and mounted differentials

    SciTech Connect (OSTI)

    Krude, W.

    1986-06-24

    An independent wheel suspension system is described for a vehicle having a chassis, vehicle support means for resiliently supporting the chassis for displacement with respect to a driving surface, a wheel assembly with a wheel rotatable about a wheel axis, and an engine adapted to provide driving torque about an engine output axis at an engine output, the independent wheel suspension system consists of: control arm means having a wheel end pivotably connected to the wheel assembly and a pair of frame ends pivotably connected to a respective pair of pivot bearings carried by the vehicle support means to define a swing axis therethrough; differential means comprising a differential housing, differential input means and differential output means within the differential housing establishing a respective differential input axis and a differential output axis substantially perpendicular thereto; transverse pivot means coupling the differential means and the vehicle support means for allowing the differential means to pivot relative to the vehicle support means about a transverse pivot axis substantially parallel to the differential output axis; and prop shaft means having a prop shaft axis and first and second prop shaft coupling means coupling, respectively, to the engine output and the differential input, the first prop shaft coupling means being a constant velocity universal joint, the second prop shaft coupling means being one of an axially splined joint or a fixed joint; whereby, as the first prop shaft coupling means undergoes articulation with respect to the prop shaft means as the chassis undergoes the displacement, the transverse pivot means allows the differential means to pivot relative to the vehicle support means about the transverse pivot axis to accommodate the articulation without articulation between the differential means and the prop shaft means.

  19. Petrologic and petrophysical evaluation of the Dallas Center Structure, Iowa, for compressed air energy storage in the Mount Simon Sandstone.

    SciTech Connect (OSTI)

    Heath, Jason E.; Bauer, Stephen J.; Broome, Scott Thomas; Dewers, Thomas A.; Rodriguez, Mark Andrew

    2013-03-01

    The Iowa Stored Energy Plant Agency selected a geologic structure at Dallas Center, Iowa, for evaluation of subsurface compressed air energy storage. The site was rejected due to lower-than-expected and heterogeneous permeability of the target reservoir, lower-than-desired porosity, and small reservoir volume. In an initial feasibility study, permeability and porosity distributions of flow units for the nearby Redfield gas storage field were applied as analogue values for numerical modeling of the Dallas Center Structure. These reservoir data, coupled with an optimistic reservoir volume, produced favorable results. However, it was determined that the Dallas Center Structure cannot be simplified to four zones of high, uniform permeabilities. Updated modeling using field and core data for the site provided unfavorable results for air fill-up. This report presents Sandia National Laboratories' petrologic and petrophysical analysis of the Dallas Center Structure that aids in understanding why the site was not suitable for gas storage.

  20. Determination of gene expression patterns using high-throughput RNA in situ hybridizaion to whole-mount Drosophila embryos

    SciTech Connect (OSTI)

    Weiszmann, R.; Hammonds, A.S.; Celniker, S.E.

    2009-04-09

    We describe a high-throughput protocol for RNA in situ hybridization (ISH) to Drosophila embryos in a 96-well format. cDNA or genomic DNA templates are amplified by PCR and then digoxigenin-labeled ribonucleotides are incorporated into antisense RNA probes by in vitro transcription. The quality of each probe is evaluated before ISH using a RNA probe quantification (dot blot) assay. RNA probes are hybridized to fixed, mixed-staged Drosophila embryos in 96-well plates. The resulting stained embryos can be examined and photographed immediately or stored at 4oC for later analysis. Starting with fixed, staged embryos, the protocol takes 6 d from probe template production through hybridization. Preparation of fixed embryos requires a minimum of 2 weeks to collect embryos representing all stages. The method has been used to determine the expression patterns of over 6,000 genes throughout embryogenesis.

  1. Energy Efficiency Post-2011 Review Workgroup 1 Meeting Notes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    P Linda Esparza, Franklin PUD, P Tom Schumacher, Benton PUD, P Jim Russell, Tacoma, P John Walkowiak, Tacoma, P Tom Karier, NWPCC, P Mike Little, SCL, P Ryan Neal, WAPAG, P...

  2. Electricity Advisory Committee Meeting Presentations June 2015...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ken Donohoo, Oncor Electric Delivery Denis Bergeron, Maine PUC Tom Sloan, Kansas House of ... PUC (85.76 KB) Panel Presentation - Tom Sloan, Kansas House of Representatives (1.06 MB) ...

  3. Comments on the Request for Information on Improving Performance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Kansas Representative Tom Sloan, sent October 15, 2013 (211.92 KB) KS Rep. Tom Sloan supporting document 1 - Electric Transmission Line Siting Compact - Final (281.92 KB) KS Rep. ...

  4. Tank Waste Committee Page 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Tom said it appears that Bechtel handpicked their independent review team and will be ... He said DOE is also conducting an independent review of the project through DOE-HSS. Tom ...

  5. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... Filter by Author Berlijn, Tom (20) Ku, Wei (10) Lin, Chia-Hui (4) May, Andrew F (3) Wang, ... Berlijn, Tom ; Lin, Chia-Hui ; Garber, William ; Ku, Wei Full Text Available May 2012 , ...

  6. Fermilab Today

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... something near Wilson Hall. Photo: Chris Olsen, AD Death Tom Jordan memorial service A memorial service for Tom Jordan, project coordinator for QuarkNet from its inception, will ...

  7. June 16 & 17, 2014 Meeting of the Electricity Advisory Committee...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Willem Fadrhonc, STEM Tom Weaver, AEP Melicia Charles, CPUC Tom Bialek, SDG&E Panel - EPA Clean Air Act Section 111(d) Rules - Richard Cowart, RAP, moderator Reid Harvey, EPA Sue ...

  8. Final Letter to DOE Regulatory Burden 9_7_2012.pdf

    Broader source: Energy.gov (indexed) [DOE]

    Co. (Miller & Smith Homes) HILLARY P.COLT Vice PresidentPrince George's Co. (Konterra) ... MARY GILES GSIPT TOM HUDSON Ribera Development TOM HYDE Miller and Smith Homes ROBERT A. ...

  9. Lessons Learned in Optimizing Workers' and Worker Representatives' Input in Work Planning and Control

    Broader source: Energy.gov [DOE]

    Presenter: Tom McQuiston, Dr. P.H., United Steelworkers, Tony Mazzocchi Center for Health, Safety and Environmental Education

  10. NNMCAB Board Minutes: September 2011 Taos

    Broader source: Energy.gov [DOE]

    Minutes of the September 28, 2011 Board meeting at Sagebrush Inn Conference Center Presentation DOE, Long Term Stewardship, Tom Longo

  11. TEC Communications Topic Group

    Office of Environmental Management (EM)

    procurement - Routing criteriaemergency preparedness Tribal Issues Topic Group * TEPP Navajo Nation (Tom Clawson) - 1404 - Needs Assessment * Identified strengths and...

  12. About EIA - Organization - U.S. Energy Information Administration (EIA)

    Gasoline and Diesel Fuel Update (EIA)

    Senior Executive Biographies Tom Leckey, Director of the Office of Oil and Gas Tom Leckey Print-friendly PDF Assistant Administrator for Energy Statistics E-mail: thomas.leckey@eia.gov Phone: (202) 586-3548 Room: 2F-073 Address: U.S. Energy Information Administration 1000 Independence Avenue, S.W. Washington, DC 20585 Duties Tom Leckey is the Assistant Administrator for Energy Statistics. In this role, Tom directs information programs covering energy consumption and efficiency; electricity;

  13. EIS-0092: Final Environmental Impact Statement

    Broader source: Energy.gov [DOE]

    Conversion to Coal, Holyoke Water Power Company, Mt. Tom Generating Station Unit 1 Holyoke, Hampden County, Massachusetts

  14. Health Safety & Environmental Protection Committee Site Risks:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    & Environmental Protection Committee Site Risks:  Radiation - alpha, gamma, beta, neutrons o Plutonium (joint w/ TWC) - IM: Becky, Tom  What is the possibility of criticality?  Sludge samples - is disturbance allowed?  How many tanks are affected?  How is plutonium being monitored? o Plutonium Finishing Plant (PFP) - IM: Tom o RAD Con program - IM: Tom  Chemical o Beryllium - IM: Keith, Mike  continue to monitor o Chemical vapors: IM: Tom  Concern that Industrial

  15. Breakout Group 3: Water Management

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3: Water Management Participants Name Organization Tom Benjamin Argonne National ... National Laboratory Breakout Group 3: Water Management GAPSBARRIERS The Water ...

  16. NNMCAB Committee Minutes: August 2014 Pojoaque

    Broader source: Energy.gov [DOE]

    Minutes of the August 13, 2014 Combined Committee meeting: Presentation DOE HQ, Long Term Stewardship, Tom Longo

  17. EPA GHG Certification of Medium- and Heavy-Duty Vehicles: Development of Road Grade Profiles Representative of US Controlled Access Highways

    SciTech Connect (OSTI)

    Wood, Eric; Duran, Adam; Burton, Evan; Gonder, Jeffrey; Kelly, Kenneth

    2015-05-12

    This report includes a detailed comparison of the TomTom national road grade database relative to a local road grade dataset generated by Southwest Research Institute and a national elevation dataset publically available from the U.S. Geological Survey. This analysis concluded that the TomTom national road grade database was a suitable source of road grade data for purposes of this study.

  18. Hitting the target: fragment screening with acoustic in situ co-crystallization of proteins plus fragment libraries on pin-mounted data-collection micromeshes

    SciTech Connect (OSTI)

    Yin, Xingyu; Scalia, Alexander; Leroy, Ludmila; Cuttitta, Christina M.; Polizzo, Gina M.; Ericson, Daniel L.; Roessler, Christian G.; Campos, Olven; Ma, Millie Y.; Agarwal, Rakhi; Jackimowicz, Rick; Allaire, Marc; Orville, Allen M.; Sweet, Robert M.; Soares, Alexei S.

    2014-05-01

    A method is presented for screening fragment libraries using acoustic droplet ejection to co-crystallize proteins and chemicals directly on micromeshes with as little as 2.5 nl of each component. This method was used to identify previously unreported fragments that bind to lysozyme, thermolysin, and trypsin. Acoustic droplet ejection (ADE) is a powerful technology that supports crystallographic applications such as growing, improving and manipulating protein crystals. A fragment-screening strategy is described that uses ADE to co-crystallize proteins with fragment libraries directly on MiTeGen MicroMeshes. Co-crystallization trials can be prepared rapidly and economically. The high speed of specimen preparation and the low consumption of fragment and protein allow the use of individual rather than pooled fragments. The Echo 550 liquid-handling instrument (Labcyte Inc., Sunnyvale, California, USA) generates droplets with accurate trajectories, which allows multiple co-crystallization experiments to be discretely positioned on a single data-collection micromesh. This accuracy also allows all components to be transferred through small apertures. Consequently, the crystallization tray is in equilibrium with the reservoir before, during and after the transfer of protein, precipitant and fragment to the micromesh on which crystallization will occur. This strict control of the specimen environment means that the crystallography experiments remain identical as the working volumes are decreased from the few microlitres level to the few nanolitres level. Using this system, lysozyme, thermolysin, trypsin and stachydrine demethylase crystals were co-crystallized with a small 33-compound mini-library to search for fragment hits. This technology pushes towards a much faster, more automated and more flexible strategy for structure-based drug discovery using as little as 2.5 nl of each major component.

  19. Program for the Inspection of Nickel Alloy Components Report from the Program’s Steering Committee: Inspection of Bottom-Mounted Instrumentation Nozzles Round Robin

    SciTech Connect (OSTI)

    Cumblidge, Stephen E.; Heasler, Patrick G.; Doctor, Steven R.; Taylor, Theodore T.

    2009-11-13

    The U.S. Nuclear Regulatory Commission (NRC) executed agreements with organizations in Japan, Sweden, South Korea, Finland, and the United States to establish the Program for the Inspection of Nickel Alloy Components (PINC).

  20. Conceptual Design of a Simplified Skid-Mounted Caustic-Side Solvent Extraction Process for Removal of Cesium from Savannah Rive Site High-Level Waste

    SciTech Connect (OSTI)

    Birdwell, JR.J.F.

    2004-05-12

    This report presents the results of a conceptual design of a solvent extraction process for the selective removal of {sup 137}Cs from high-level radioactive waste currently stored in underground tanks at the U.S. Department of Energy's Savannah River Site (SRS). This study establishes the need for and feasibility of deploying a simplified version of the Caustic-Side Solvent Extraction (CSSX) process; cost/benefit ratios ranging from 33 to 55 strongly support the considered deployment. Based on projected compositions, 18 million gallons of dissolved salt cake waste has been identified as having {sup 137}Cs concentrations that are substantially lower than the worst-case design basis for the CSSX system that is to be deployed as part of the Salt Waste Processing Facility (SWPF) but that does not meet the waste acceptance criteria for immobilization as grout in the Saltstone Manufacturing and Disposal Facility at SRS. Absent deployment of an alternative cesium removal process, this material will require treatment in the SWPF CSSX system, even though the cesium decontamination factor required is far less than that provided by that system. A conceptual design of a CSSX processing system designed for rapid deployment and having reduced cesium decontamination factor capability has been performed. The proposed accelerated-deployment CSSX system (CSSX-A) has been designed to have a processing rate of 3 million gallons per year, assuming 90% availability. At a more conservative availability of 75% (reflecting the novelty of the process), the annual processing capacity is 2.5 million gallons. The primary component of the process is a 20-stage cascade of centrifugal solvent extraction contactors. The decontamination and concentration factors are 40 and 15, respectively. The solvent, scrub, strip, and wash solutions are to have the same compositions as those planned for the SWPF CSSX system. As in the SWPF CSSX system, the solvent and scrub flow rates are equal. The system is designed to facilitate remote operation and direct maintenance. Two general deployment concepts were considered: (1) deployment in an existing but unused SRS facility and (2) deployment in transportable containers. Deployment in three transportable containers was selected as the preferred option, based on concerns regarding facility availability (due to competition from other processing alternatives) and decontamination and renovation costs. A risk assessment identified environmental, safety, and health issues that exist. These concerns have been addressed in the conceptual design by inclusion of mitigating system features. Due to the highly developed state of CSSX technology, only a few technical issues remain unresolved; however, none of these issues have the potential to make the technology unviable. Recommended development tasks that need to be performed to address technical uncertainties are discussed in this report. Deployment of the proposed CSSX-A system provides significant qualitative and quantitative benefits. The qualitative benefits include (1) verification of full-scale contactor performance under CSSX conditions that will support SWPF CSSX design and deployment; (2) development of design, fabrication, and installation experience bases that will be at least partially applicable to the SWPF CSSX system; and (3) availability of the CSSX-A system as a means of providing contactor-based solvent extraction system operating experience to SWPF CSSX operating personnel. Estimates of fixed capital investment, development costs, and annual operating cost for SRS deployment of the CSSX-A system (in mid-2003 dollars) are $9,165,199, $2,734,801, and $2,108,820, respectively. When the economics of the CSSX-A system are compared with those of the baseline SWPF CSSX system, benefit-to-cost ratios ranging from 20 to 47 are obtained. The benefits in the cost/benefit comparison arise from expedited tank closure and reduced engineering, construction, and operating costs for the SWPF CSSX system. No significant impediments to deployment were determined in the reported a

  1. Browse by Discipline -- E-print Network Subject Pathways: Fission...

    Office of Scientific and Technical Information (OSTI)

    College Canales, Jimena (Jimena Canales) - Department of the History of Science, Harvard University Carlson, Lawrence E. (Lawrence E. Carlson) - Department of Mechanical ...

  2. Global Nuclear Futures Program Manager, Sandia National Laboratories |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration | (NNSA) Global Nuclear Futures Program Manager, Sandia National Laboratories Tom Sanders Tom Sanders Tom Sanders, president of the American Nuclear Society and manager of Global Nuclear Futures Program at Sandia National Laboratories, was recently appointed to the U.S. Department of Commerce's Civil Nuclear Trade Advisory Committee (CINTAC). CINTAC advises the Secretary of Commerce on issues related to programs that expand United States exports of

  3. October

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    October October We are your source for reliable, up-to-date news and information; our scientists and engineers can provide technical insights on our innovations for a secure nation. Carlos Tomé Tomé wins Distinguished Scientist, Engineer Award The Minerals, Metals & Materials Society recognized Tomé for his "long lasting contribution to the fundamental understanding of microstructure, properties and performance of structural materials for industrial applications." - 10/29/12

  4. Medal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to receive Khan International Medal November 18, 2015 The International Journal of Plasticity will honor Carlos Tomé of Materials Science in Radiation and Dynamics Extremes (MST-8) with the Khan International Medal during the 2016 International Conference on Plasticity, Damage and Fracture in Hawaii. The journal recognized Tomé for his "outstanding life-long contributions in the field of plasticity."Upon hearing of his award, Tomé acknowledged his work with DOE Basic Energy

  5. Bench-Scale Cross Flow Filtration of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the meeting) Larry Berg, PNNL Ann Fridlind, NASAGoddard Institute for Space Studies Tom Jackson, U.S. Department of Agriculture (not present at the meeting) Everette Joseph,...

  6. 20 Years of Solar Measurements: The Solar Radiation Research...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Years of Solar Measurements: The Solar Radiation Research Laboratory (SRRL) at NREL Tom ... * Continuous measurements of key solar radiation resources * Calibrations of instruments ...

  7. PDSF at NERSC - Site Report ? HEPiX Spring 2012 Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Image versioning 20 PDSF History 21 2003 2012 History 22 2003 2012 Shane Canon Cary Whitney Iwona Sakrejda Tom Langley Iwona Sakrejda Eric Hjort Larry Pezzaglia...

  8. Erratum: Evolution of antiferromagnetic susceptibility under...

    Office of Scientific and Technical Information (OSTI)

    Authors: Dhital, Chetan ; Hogan, Tom ; Yamani, Z. ; Birgeneau, Robert J. ; Tian, W. ; Matsuda, M. ; Sefat, A. S. ; Wang, Ziqiang ; Wilson, Stephen D. Publication Date: 2014-10-09 ...

  9. Y-12 and the 2000 decade ? Modernization to Transformation,...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transformation, part 2 As we continue with Tom Smith's account of the transition from "Modernization" to "Transformation" he notes, "The original plan was to put three new special...

  10. Smart-Grid Ready PV Inverters with Utility Communication

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    INTEGRATION Smart-Grid Ready PV Inverters with Utility Communication Electric Power Research Institute Brian Seal, Tom Key, Aminul Huque, Lindsey Rogers Technical Contact Brian ...

  11. NNMCAB Board Minutes: Novmeber 2000 San Ildefonso

    Broader source: Energy.gov [DOE]

    Minutes of the November 15, 2000 Board Meeting at San Ildefonso Pueblo Presentation CDC, ChimRisk Control Project on Historical Records, Tom Weidner

  12. Missouri River Energy Services (MRES) Wind Farm (2002) | Open...

    Open Energy Info (EERE)

    Tom Wind Energy Purchaser MRES Worthington Public Utilities Location Worthington - Nobles County MN Coordinates 43.6659, -95.7493 Show Map Loading map......

  13. Inhibition of oncogenic Wnt signaling through direct targeting...

    Office of Scientific and Technical Information (OSTI)

    Authors: Grossmann, Tom N. ; Yeh, Johannes T.-H. ; Bowman, Brian R. ; Chu, Qian ; Moellering, Raymond E. ; Verdine, Gregory L. 1 ; DFCI) 2 + Show Author Affiliations (Harvard) ...

  14. University of Michigan adds Depletion Capability to MPACT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Michigan researchers Ben Collins, Ang Zhu, Brendan Kochunas, and Tom Downar. The numerical methods to implement nuclide point depletion and integrate a time dependent...

  15. BPA, Transmission, Non-Wires Analysis, Phase 2: Feasibility Report...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Maryam Asgharian, Larry Bekkendahl, Frank Brown, Sarah Burczak, Tom Coatney, Sean Egusa, Richard Ellison, Anders Johnson, Hardev Juj, Steven Knudsen, Mark Korsness, Stacy Mason,...

  16. Argonne Physics Division - ATLAS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Safety Tom Mullen, Physics Division Safety Engineer. Please Note: If you have any comments or concerns regarding safety at ATLAS, please contact the Physics Division Safety ...

  17. The Department of Energy Announces New Membership for the Electricity...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Wanda Reder Vice President, Power Systems Services S&C Electric Company Brad Roberts Executive Director Electricity Storage Association Honorable Tom Sloan Representative Kansas ...

  18. Bench-Scale Cross Flow Filtration of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Although the standard ARM optical depth product uses total ozone mapping experiment spectrometer (TOMS) or ozone monitoring instrument (OMI) satellite data for column ozone amount, ...

  19. Terwilliger honored with ACA Award

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tom Terwilliger The Trueblood award is established in memory of Professor Kenneth N. ... but even more because of his brilliant contributions to crystallographic computing." ...

  20. ARM - CLASIC Science Team

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    For a complete list of contacts for the above mentioned platforms, see CLASICCHAPS AIR Contact List. Land Surface Measurement Team Tom Jackson, USDAARS, Team Leader Martha ...

  1. yt: A MULTI-CODE ANALYSIS TOOLKIT FOR ASTROPHYSICAL SIMULATION...

    Office of Scientific and Technical Information (OSTI)

    Authors: Turk, Matthew J. ; Norman, Michael L. 1 ; Smith, Britton D. 2 ; Oishi, Jeffrey S. ; Abel, Tom 3 ; Skory, Stephen ; Skillman, Samuel W. 4 + Show Author Affiliations ...

  2. Legacy Management 2011-2020 Strategic Plan

    Broader source: Energy.gov [DOE]

    At the August 13, 2014 Committee meeting Tom Longo DOE, Provided Information on DOEs Long Term Stewardship Plan and Office of Legacy Management.

  3. Molecular Dynamics Simulations of Gas Selectivity in Amorphous...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dynamics Simulations of Gas Selectivity in Amorphous Porous Molecular Solids Previous Next List Shan Jiang, Kim E. Jelfs, Daniel Holden, Tom Hasell, Samantha Y. Chong, Maciej...

  4. BETO Ranks High in Biofuels Digest's Top 125 in the Advanced...

    Broader source: Energy.gov (indexed) [DOE]

    Biofuels Digest recently released its "Top 125 in the Advanced Bioeconomy," ranking ... For the fifth year in a row, Biofuels Digest honored Secretary of Agriculture Tom Vilsack ...

  5. Southwestern Power Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    December 7, 2012 Southwestern Helps Restore Power After Hurricane Sandy Southwestern Aids Sandy Recovery Line crews from Southwestern repair distribution lines in Tom's River, New ...

  6. Federal Energy Management Program Organization Chart

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Timothy Unruh Sustainability Services Daniel Gore Sustainability, Legislative Affairs Nicolas Baker Large Campus Initiative Daniel Gore Fleet Tom Homan (Acting) Organization Chart ...

  7. Federal Energy Management Program Organization Chart

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Training Beverly Dyer Large Campus Initiative Daniel Gore Fleet Tom Homan (Acting) Organization Chart Technical Services Brad Gustafson Procurement Services Skye Schell Customer ...

  8. Dynamical Expansion of HII Regions From Ultracompact to Compact...

    Office of Scientific and Technical Information (OSTI)

    Authors: Low, Mordecai-Mark Mac ; Toraskar, Jayashree ; Amer. Museum Natural Hist. ; Oishi, Jeffrey S. ; Amer. Museum Natural Hist. Virginia U., Astron. Dept. ; Abel, Tom ; ...

  9. Dwarf Galaxies with Ionizing Radiation Feedback II: Spatially...

    Office of Scientific and Technical Information (OSTI)

    Astrophys. ; Goldbaum, Nathan J. ; UC, Santa Cruz, Astron. Astrophys. ; Abel, Tom ; KIPAC, Menlo Park Publication Date: 2013-10-21 OSTI Identifier: 1097423 Report Number(s): ...

  10. Mark Caffarey, UMICORE, "Opportunities and Limits to Recycling...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    icon SessionC4Caffarey.ppt More Documents & Publications Rapporteurs Report: Tom Lograsso, Ames Laboratory and Nick Morley, Oakdene Hollins 2010 Critical Materials...

  11. NOTICE OF OFFICE OF MANAGEMENT AND BUDGET ACTION

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2262010 Department of Energy Office of Administration FOR CERTIFYING OFFICIAL: Tom Pyke FOR CLEARANCE OFFICER: Christina Rouleau In accordance with the Paperwork Reduction Act,...

  12. Complementarity of Dark Matter Searches in the pMSSM (Journal...

    Office of Scientific and Technical Information (OSTI)

    ; Hewett, JoAnne ; SLAC ; Ismail, Ahmed ; Argonne U. Illinois, Chicago ; Rizzo, Tom ; Wood, Matthew ; SLAC Publication Date: 2014-06-03 OSTI Identifier: 1133387 Report...

  13. Beasley Lab | Savannah River Ecology Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Sarah Webster returned to Belarus along with Cara Love to recover wolf GPS transmitters ... with Tom Hinton to conduct research on wolf spatial ecology and carnivore population ...

  14. Microsoft Word - NRAP-TRS-III-004-2014_Acid Gas Interactions...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... and Tom Nuhfer and Jason Wolf of the Material Science and Engineering Department for their assistance with the advanced analysis of the exposed pozzolan-amended cement samples. ...

  15. Dynamics and efficiency of magnetic vortex circulation reversal...

    Office of Scientific and Technical Information (OSTI)

    ; Kalousek, Radek ; Im, Mi-Young ; Fischer, Peter ; ikola, Tom ; Fullerton, Eric E. Publication Date: 2015-03-16 OSTI Identifier: 1180781 GrantContract Number:...

  16. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... Bosiljevac, Tom (1) Dwyer, Stephen F. (1) Harper, Alan (1) Lindau, William (1) Richards, ... ; Dwyer, Stephen F. ; Lindau, William ; Harper, Alan Structural Considerations for Solar ...

  17. Structural considerations for solar installers : an approach...

    Office of Scientific and Technical Information (OSTI)

    Authors: Richards, Elizabeth H. ; Schindel, Kay 1 ; Bosiljevac, Tom ; Dwyer, Stephen F. ; Lindau, William 2 ; Harper, Alan 1 + Show Author Affiliations (City of Madison, WI) ...

  18. TRITIUM SESSIONS AT THE

    Office of Environmental Management (EM)

    TRITIUM IN FISSION AND FUSION sponsored by IRD; cosponsored by BMD Session Organizer and Chair: Tom Voss (Cybermesa) Discussion of Tritium Safety in Fusion Reactors, Satoshi ...

  19. Microsoft Word - Abstracts - Poster session - Aug8.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... IM.02 Nanoscale Chemical Imaging with Photo-induced Force Microscopy Robert Kertayasa, Molecular Vista Co-authors: Sung Park, Tom Albrecht Infrared Photo-induced Force Microscopy ...

  20. Pankratz DOE Presentation.ppt

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tom Pankratz - 5 November 2015 - tp@globalwaterintel.com Reverse Osmosis Desalination "%&'()&*+,-&*.).0&12'&3"'4.5")* "%&'()*+,-.012,1*3 456323&'...

  1. ERSUG Meeting July 11 - 12, 1994 Minutes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... for using internet at home Examples: SLIP, PPP Need X server software plus user interface ... SPP Project Status and Plans for 1995 - Bruce Curtis and Tom Kitchens ...

  2. Recycler Medium Energy Elctron Coolinig Experiment (Technical...

    Office of Scientific and Technical Information (OSTI)

    No abstract prepared. Authors: MacLachlan, Jim ; Schmidt, Chuck ; Assadi, Saeed ; Kroc, Tom ; Jackson, Gerald P. ; Nagaisev, Sergei ; Warner, Arden A. ; Hurth, Patrick G. ; ...

  3. Speakers Bureau

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    whose ideas and science are changing and inspiring the world. Karissa Sanbonmatsu Nature, Nurture or Neither: The New Science of Epigenetics Tom Terwilliger The Shapes of...

  4. doi:10.3402/mehd.v26.26555

    Office of Scientific and Technical Information (OSTI)

    ... ASD-like symp- toms, including a neuroinflammatory response, can be induced from intraventricular infusion of propionic acid (58) resulting in significant changes in behavior and ...

  5. Advanced Wind Energy Systems AWES | Open Energy Information

    Open Energy Info (EERE)

    Wind Energy Systems AWES Jump to: navigation, search Name: Advanced Wind Energy Systems (AWES) Place: Toms River, New Jersey Sector: Wind energy Product: Advanced Wind Energy...

  6. Microsoft Word - TX-100 Final Report - SAND2007-6066.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Manager: Tom Ashwill Abstract This report details the work completed under the TX-100 blade manufacturing portion of the Carbon-Hybrid Blade Developments: Standard and...

  7. Microsoft Word - CX-100 Final Report - SAND2007-6065.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Manager: Tom Ashwill Abstract This report details the work completed under the CX-100 blade manufacturing project. It presents the tooling design and manufacturing, blade...

  8. Comment permalink | OSTI, US Dept of Energy Office of Scientific...

    Office of Scientific and Technical Information (OSTI)

    Email: tom.malec@cn.doe.gov Assistant Secretary for Energy Efficiency and Renewable Energy (EE) Patrice Pisinski, EE-12, Director, Office of Communications and Outreach ...

  9. Membrane Performance and Durability Overview for Automotive Fuel...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Membrane Performance and Durability Overview for Automotive Fuel Cell Applications Presented by Tom Greszler of General Motors at the High Temperature Membrane Working Group ...

  10. PSERC Webinar March 13

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tom Overbye Professor, Electrical and Computer Engineering University of Illinois at ... Biography: Thomas J. Overbye is the Fox Family Professor of Electrical and Computer ...

  11. arm_2007_rutan.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sky Broadband Surface Albedo From CERES and MODIS Instruments on Board Terra Satellite, Direct Comparisons David Rutan 1 , Tom Charlock 2 , Crystal Schaff 3 , Miguel Roman 4 , Fred...

  12. Parallel Integral Curves (Book) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Search Results Book: Parallel Integral Curves Citation Details In-Document Search Title: Parallel Integral Curves Authors: Pugmire, Dave 1 ; Peterka, Tom 2 ; ...

  13. Red Cross honors LLNL as biggest blood donor west of Mississippi...

    National Nuclear Security Administration (NNSA)

    Read more. NNSA Blog About the photo: Jan Siva, chief executive officer of the Northern California Blood Services Region, presented Tom Gioconda, deputy director of LLNL, with a ...

  14. Microsoft PowerPoint - Pete Lyons 6-12-12 NEAC.pptx

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Innovation Shane Johnson, Acting Robert Price Office of Fuel Cycle Research & ... Tom O'Connor, Acting NE-74 Office of Uranium Management and Policy William Szymanski ...

  15. State Energy Advisory Board Meeting Minutes October 2012

    Energy Savers [EERE]

    Absent Susan S. Brown, Deputy Administrator, Wisconsin Division of Energy Tom Carey, Director, Energy and Rehabilitation Programs, New York State Division of Housing and ...

  16. CBFO selects Senior WIPP Recovery Manager

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    effective Dec. 8, 2014. He replaces Tom Teynor, who returned to Hanford to be the Federal Project Manager of the Plutonium Finishing Plant project. Directly leading and...

  17. HACC: Simulating Sky Surveys on State-of-the-Art Supercomputing...

    Office of Scientific and Technical Information (OSTI)

    Authors: Habib, Salman ; Pope, Adrian ; Finkel, Hal ; Frontiere, Nicholas ; Heitmann, Katrin ; Daniel, David ; Fasel, Patricia ; Morozov, Vitali ; Zagaris, George ; Peterka, Tom ; ...

  18. LANL monitoring the situation unfolding in Paris, France

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In arid lands worldwide, composite layers called biocrusts, comprising bacteria, fungi, lichens and mosses, cover the soil between the widely spaced plants. Carlos Tom...

  19. DRAFT ADVICE - UNACCEPTABLE PROGRAM IMPACTS UNDER FY 97 BUDGET

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Protection Agency, Region 10 Tom Fitzsimmons, Washington State Department of Ecology Wade Ballard, Deputy Designated Federal Official, U.S. Department of Energy Michael...

  20. file://L:\\DOE-hanford.gov\\public\\boards\\hab\\advice\\advice109...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Protection Agency, Region 10 Tom Fitzsimmons, Washington Department of Ecology Wade Ballard, Deputy Designated Federal Official The Oregon and Washington Congressional...

  1. file://L:\\DOE-hanford.gov\\public\\boards\\hab\\advice\\advice108...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Protection Agency, Region 10 Tom Fitzsimmons, Washington Department of Ecology Wade Ballard, Deputy Designated Federal Official The Oregon and Washington Congressional...

  2. file://L:\\DOE-hanford.gov\\public\\boards\\hab\\advice\\advice104...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Board cc: Chuck Clarke, U.S. EPA Tom Fitzsimmons, Washington Department of Ecology Wade Ballard, Deputy Designated Federal Official The Oregon and Washington Congressional...

  3. Momotombo Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    World Geothermal Power Generation 2001-2005. Proceedings of World Geothermal Congress; Turkey: World Geothermal Congress. Tom Harding-Newman, James Morrow, Subir Sanyal,...

  4. Sandia National Laboratories: News: Publications: Lab News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    passenger ferry and refueling station. by Patti Koning When it comes to environmental sustainability, Red and White Fleet president Tom Escher is all in. "Everyone is talking...

  5. June 2015 Most Viewed Documents for Energy Storage, Conversion...

    Office of Scientific and Technical Information (OSTI)

    chemistries for silica removal from cooling tower water. Nyman, May Devan; Altman, Susan Jeanne; Stewart, Tom (2010) 79 Water-lithium bromide double-effect absorption cooling ...

  6. NERSC-Mar-2013.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sarkar (Rice) Ph.D. Students Muthu Baskaran Uday Bondhugula Jim Dinan Xiaoyang Gao Albert Hartono Justin Holewinski Sriram Krishnamoorthy Qingda Lu Mohammad Arafat Tom Henretty...

  7. Microsoft PowerPoint - 8_Morello NMMSS_2013_Presentation_Morello...

    National Nuclear Security Administration (NNSA)

    on NMMSS Licensee Issues First Step... - Meeting held with Paul Peduzzi (NRC), Ron Albert (NRC), Andrew Mauer (NEI) and Tom Morello (CENG) October 2012. - The issues from the...

  8. ALSNews Vol. 356

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    boy who is fascinated with chemistry, has memorized the periodic table, and sports Tom Lehrer glasses when immersed in science. So, how could the request be refused? See...

  9. Slide 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AY-102 Status Tom Fletcher, Assistant Manager for Tank Farms Project September 7, 2012 Summary Routine periodic visual monitoring (via camera) of the AY-102 annulus found material...

  10. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hanford Advisory Board June 6, 2013 Tom Fletcher, Assistant Manager Tank Farms Project Office of River Protection Mission 2 "Remove waste from the past production of nuclear...

  11. PEM Fuel Cell Technology, Key Research Needs and Approaches ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PEM FUEL CELL TECHNOLOGY Key Research Needs and Approaches Tom Jarvi UTC Power South ... Stationary CHP 40-80,000 hr components - seals, membranes Water management Robust systems ...

  12. Joint Fuel Cell Bus Workshop | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Challenges for PEM Transit Fleet Applications, Tom Madden, UTC Power, LLC Fuel Cell Buses - Current Status and Path Forward, Greg James, Ballard Power Systems HybriDrive ...

  13. SSRL HEADLINES March 2010

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    His overall facility update was followed by an overview of SSRL's Structural Molecular Biology program by Britt Hedman. Kelly Gaffney, Mike Toney, Tom Rabedeau, Aaron...

  14. Office of Legacy Management the First Decade 2003-2013

    Broader source: Energy.gov [DOE]

    At the August 13, 2014 Committee meeting Tom Longo DOE, Provided an Overview of the Last Ten Years of Legacy Management Across the DOE Complex.

  15. Hydrogen Fuel for Material Handling | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Material Handling Hydrogen Fuel for Material Handling Presented by Tom Joseph at the National Hydrogen Assocation Conference and Hydrogen Expo PDF icon josephinfrastructurefo...

  16. ARM - Blog Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Editor's Note: Ben Toms, intern from University of Oklahoma for the Plains Elevated ... This past week, members of the University of Oklahoma (OU) and National Severe Storms ...

  17. Nuclear Safety Information Agreement Between the U.S. Nuclear...

    Broader source: Energy.gov (indexed) [DOE]

    DOE), Cathy Haney (Director, Office of Nuclear Materials Safety and Safeguards (NRC)), ... (NRC)) Back Row: Tom Hiltz, Office of Nuclear Safety (EHSS DOE), Roy Zimmerman (Deputy ...

  18. Data publication with the structural biology data grid supports...

    Office of Scientific and Technical Information (OSTI)

    J. ; Bonvin, Alexandre M.J. J. ; Borek, Dominika ; Brett, Tom J. ; Caflisch, Amedeo ; Chang, Chung-I more ; Chazin, Walter J. ; Corbett, Kevin D. ; Cosgrove, Michael S. ; ...

  19. Mr. Fred Cartwright Executive Director, Clemson University Internation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Automotive Research Mr. Bryan Dods Executive & Chief Engineer GE Power & Water Mr. Tom Elswick Director of Business Development - Products & Systems Siemens Industry USA Mr. ...

  20. Implementing and diagnosing magnetic flux compression on the...

    Office of Scientific and Technical Information (OSTI)

    ... Kincannon 1 ; Cuneo, Michael E. 1 ; Sinars, Daniel 1 ; Tomlinson, Kurt 2 ; Smith, Gary 2 ; Paguio, Reny 2 ; Intrator, Tom 3 ; Weber, Thomas 3 ; Greenly, John ...

  1. Sandia Energy - Water Power

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6, a backward--bent duct buoy (BBDB) oscillating water column wave energy converter design. The team from HMRC included Tom Walsh, Brian Holmes, Florent Thiebaut, Neil...

  2. The Birth of a Galaxy: Primordial Metal Enrichment and Stellar...

    Office of Scientific and Technical Information (OSTI)

    Authors: Wise, John H. ; Turk, Matthew J. ; Norman, Michael L. ; Abel, Tom ; KIPAC, Menlo Park Publication Date: 2012-12-13 OSTI Identifier: 1057421 Report Number(s): ...

  3. The Effect of Absorption Systems on Cosmic Reionization (Journal...

    Office of Scientific and Technical Information (OSTI)

    Authors: Alvarez, Marcelo A. ; Canadian Inst. Theor. Astrophys. ; Abel, Tom ; KIPAC, Menlo Park ; , Publication Date: 2013-10-25 OSTI Identifier: 1097419 Report Number(s): ...

  4. NSA Broadband Instrument Study: Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Broadband Instrument Study: Update PI: Scott Richardson, NSA SST Co-Is: Chuck Long, Tom Stoffel, Ells Dutton, Joe Michalsky, Jeff Zirzow... Background * NSA last site where Diffuse ...

  5. Improved AST's Based on Real World FCV Data

    Broader source: Energy.gov (indexed) [DOE]

    Tom Madden Manager, Advanced PEM Technology UTC Power Corporation This presentation does not contain any proprietary or confidential information IMPROVED AST's BASED ON FCV DATA ...

  6. Microsoft Word - Ex Parte Memo.docx

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reg. 41656. The following individuals were present: Jeremy Dommu, DOE Allen Tsao, Navigant Kevin Morrissey, Navigant Mansi Thakkar, Navigant RJ Meyers, EPA John Clinger, ICFI Tom ...

  7. Building America Whole-House Solutions for New Homes: Schneider...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon Schneider Homes, Inc.: Village at Miller Creek - Burien, WA More Documents & Publications Building America Whole-House Solutions for New Homes: Tom Walsh & Co., Portland, ...

  8. Site Transition Summary: Clean-up Completion to Long Term Stewardship

    Broader source: Energy.gov [DOE]

    At the August 13, 2014 Committee meeting Tom Longo DOE, Provided Information on the Long Term Stewardship Process that the Office of Legacy Management is Responsible for.

  9. Texas A&M Regional High School Science Bowl | U.S. DOE Office...

    Office of Science (SC) Website

    National Science Bowl U.S. Department of Energy SC-27 Forrestal Building 1000 ... County, TX Titus County, TX Tom Green County, TX Travis County, TX Trinity ...

  10. Texas AM Junior Science Bowl | U.S. DOE Office of Science (SC...

    Office of Science (SC) Website

    National Science Bowl U.S. Department of Energy SC-27 Forrestal Building 1000 ... County, TX Titus County, TX Tom Green County, TX Travis County, TX Trinity ...

  11. Report: Communications

    Office of Environmental Management (EM)

    The EMAB Communications Team comprising Ms. Jennifer Salisbury, Ms. Lorraine Anderson, Mr. A. James Barnes, and Mr. Tom Winston, has continued to monitor EM's...

  12. NREL: Wind Power Research - NWTC Researchers Develop Wave Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL Research Fellow Bob Thresher (left) and Postdoctoral Researcher Nathan Tom (right) capture the power potential of wave energy with a new record of invention. Photo by Dennis ...

  13. Grid Transformation Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transmission Metric Discussion by Brian Keel (Salt River Project) Probabilistic Risk Analysis by Tom Burgess (NERC) RISC Recommendation on ERO Priorities by Brian Silverstein...

  14. SSRL 32nd Users' Meeting Oct 17 - 19, 2005

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Pat Dehmer's talk Jonathan Dorfan's talk Ian Evans's talk Bob Hettel's talk Mike Lubell's talk Tom Rabedeau's talk Jo Sthr's opening talk...

  15. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... (United States) USDOE Office of Fissile Materials Disposition (MD) (United States) USDOE ... Norman, Benjamin (1) Peterka, Tom (1) Sailor, Bill (1) Sehrish, Saba (1) Tornga, Shawn R ...

  16. NREL Names New Executives to Lead Bioenergy, Bioscience and Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Names New Executives to Lead Bioenergy, Bioscience and Energy Systems Integration Facility ... NREL has named Tom Foust, a nine-year NREL veteran, as its National Bioenergy Center ...

  17. BWXTymes, A newsletter for the employees and friends of the Y...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Jack Dixon, Donna Flicek, Brian Gullett, Jim Hensley, Tom Hudson Jr., Andrew Jackson, ... briefi ngs and site tours, conducted walk-downs of existing processes and Information ...

  18. Microsoft Word - AWEA06paper _2_.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Blade Technology Innovations for Utility-Scale Turbines Tom Ashwill Wind Energy Department Sandia National Laboratories* Albuquerque, NM 87185, June 2006 Introduction. Sandia...

  19. NNMCAB Board Minutes: November 2000 San Ildefonso

    Broader source: Energy.gov [DOE]

    Minutes of the November 15, 2000 Board Meeting at San Ildefonso Pueblo Presentation CDC, ChemRisk Control Project on Historical Records, Tom Weidner

  20. Agenda for Program 84

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    & Electric 4:00pm Session 4: Interconnection Standards: Utility & Industry Perceptions Panel Discussion - Can IEEE 1547 meet future industry needs? Tom Basso, NREL ...

  1. PLUT_summary.eps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nageswara S. V. Rao , William R. Wing , Qishi Wu , Nasir Ghani , Tom Lehman , Chin P. Guok and Eli Dart Computer Science and Mathematics Division, Oak ...

  2. 2016 Reliability & Markets Peer Review | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    system inertia and fast storage response - Tom Overbye Session VI Efficient AC optimal power flow & global optimizer solutions - HyungSeon Oh Dynamic reserve policies for market ...

  3. Industry Growth Forum Cultivates Clean Energy Entrepreneurship...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    From left: Michael Knotek, Deputy Undersecretary for Science and Energy, DOE; Tom Morehouse, Principal Deputy Asst. Secretary of Defense, Operational Energy Plans and Programs, DOD...

  4. About EIA - Insideeia - U.S. Energy Information Administration...

    Gasoline and Diesel Fuel Update (EIA)

    ... Thursday's presentations included: Tom Leckey, Green Button Data Terry Yen and David ... Refinery Modeling to the Short-Term Energy Outlook Preston McDowney, Edits and ...

  5. Updating Interconnection Screens for PV System Integration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tom Key, Kristen Nicole, Jeff Smith Electric Power Research Institute Updating ... Kristen Nicole, Jeff Smith Electric Power Research Institute Prepared under Task No(s). ...

  6. Past High School National Science Bowl Winners (1991 - 2014)...

    Office of Science (SC) Website

    ... Team members: Nirjar (Juny) Sridhara, Tom Zavisca, Michael Hsia, Jay Moore, Lee Cochran, Hugh C. Smith (COACH) Prize: Trip to the International School of Physics in Sydney, ...

  7. PNNL: Center for Molecular Electrocatalysis - Advisory Committee

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advisory Committee Kathy Ayers Kathy Ayers (Proton Energy Systems) R. Tom Baker R. Tom Baker (University of Ottawa) Charles Casey Charles Casey (University of Wisconsin) Michael Hall Michael Hall (Texas A&M University) Carl Koval Carl Koval (University of Colorado at Boulder) Thomas B. Rauchfuss Thomas B. Rauchfuss (University of Illinois

  8. Energy and Economic Impacts of H.R.5049, the Keep America Competitive Global Warming Policy

    Reports and Publications (EIA)

    2006-01-01

    This report responds to a May 2, 2006 request from Congressmen Tom Udall and Tom Petri asking the Energy Information Administration to analyze the impacts of their legislation implementing a market-based allowance program to cap greenhouse gas emissions at 2009 levels.

  9. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Measurement (ARM) Program: Observing the Atmosphere with Ground-Based Remote Sensing The Atmospheric Radiation Measurement (ARM) Program: Observing the Atmosphere with Ground-Based Remote Sensing Tom Ackerman Chief Scientist Tom Ackerman Chief Scientist ARM ARM Atmospheric Radiation Measurement Atmospheric Radiation Measurement Pacific Northwest National Laboratory Pacific Northwest National Laboratory The "other" Washington ARM ARM Atmospheric Radiation Measurement Atmospheric

  10. Grant County, Wisconsin: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Grant, Wisconsin Livingston, Wisconsin Millville, Wisconsin Montfort, Wisconsin Mount Hope, Wisconsin Mount Ida, Wisconsin Muscoda, Wisconsin North Lancaster, Wisconsin Patch...

  11. Reference Inflow Characterization for River Resource Reference Model (RM2)

    SciTech Connect (OSTI)

    Neary, Vincent S

    2011-12-01

    Sandia National Laboratory (SNL) is leading an effort to develop reference models for marine and hydrokinetic technologies and wave and current energy resources. This effort will allow the refinement of technology design tools, accurate estimates of a baseline levelized cost of energy (LCoE), and the identification of the main cost drivers that need to be addressed to achieve a competitive LCoE. As part of this effort, Oak Ridge National Laboratory was charged with examining and reporting reference river inflow characteristics for reference model 2 (RM2). Published turbulent flow data from large rivers, a water supply canal and laboratory flumes, are reviewed to determine the range of velocities, turbulence intensities and turbulent stresses acting on hydrokinetic technologies, and also to evaluate the validity of classical models that describe the depth variation of the time-mean velocity and turbulent normal Reynolds stresses. The classical models are found to generally perform well in describing river inflow characteristics. A potential challenge in river inflow characterization, however, is the high variability of depth and flow over the design life of a hydrokinetic device. This variation can have significant effects on the inflow mean velocity and turbulence intensity experienced by stationary and bottom mounted hydrokinetic energy conversion devices, which requires further investigation, but are expected to have minimal effects on surface mounted devices like the vertical axis turbine device designed for RM2. A simple methodology for obtaining an approximate inflow characterization for surface deployed devices is developed using the relation umax=(7/6)V where V is the bulk velocity and umax is assumed to be the near-surface velocity. The application of this expression is recommended for deriving the local inflow velocity acting on the energy extraction planes of the RM2 vertical axis rotors, where V=Q/A can be calculated given a USGS gage flow time

  12. RTOG 0529: A Phase 2 Evaluation of Dose-Painted Intensity Modulated Radiation Therapy in Combination With 5-Fluorouracil and Mitomycin-C for the Reduction of Acute Morbidity in Carcinoma of the Anal Canal

    SciTech Connect (OSTI)

    Kachnic, Lisa A.; Winter, Kathryn; Myerson, Robert J.; Goodyear, Michael D.; Willins, John; Esthappan, Jacqueline; Haddock, Michael G.; Rotman, Marvin; Parikh, Parag J.; Safran, Howard; Willett, Christopher G.

    2013-05-01

    Purpose: A multi-institutional phase 2 trial assessed the utility of dose-painted intensity modulated radiation therapy (DP-IMRT) in reducing grade 2+ combined acute gastrointestinal and genitourinary adverse events (AEs) of 5-fluorouracil (5FU) and mitomycin-C (MMC) chemoradiation for anal cancer by at least 15% compared with the conventional radiation/5FU/MMC arm from RTOG 9811. Methods and Materials: T2-4N0-3M0 anal cancer patients received 5FU and MMC on days 1 and 29 of DP-IMRT, prescribed per stage: T2N0, 42 Gy elective nodal and 50.4 Gy anal tumor planning target volumes (PTVs) in 28 fractions; T3-4N0-3, 45 Gy elective nodal, 50.4 Gy ≤3 cm or 54 Gy >3 cm metastatic nodal and 54 Gy anal tumor PTVs in 30 fractions. The primary endpoint is described above. Planned secondary endpoints assessed all AEs and the investigator’s ability to perform DP-IMRT. Results: Of 63 accrued patients, 52 were evaluable. Tumor stage included 54% II, 25% IIIA, and 21% IIIB. In primary endpoint analysis, 77% experienced grade 2+ gastrointestinal/genitourinary acute AEs (9811 77%). There was, however, a significant reduction in acute grade 2+ hematologic, 73% (9811 85%, P=.032), grade 3+ gastrointestinal, 21% (9811 36%, P=.0082), and grade 3+ dermatologic AEs 23% (9811 49%, P<.0001) with DP-IMRT. On initial pretreatment review, 81% required DP-IMRT replanning, and final review revealed only 3 cases with normal tissue major deviations. Conclusions: Although the primary endpoint was not met, DP-IMRT was associated with significant sparing of acute grade 2+ hematologic and grade 3+ dermatologic and gastrointestinal toxicity. Although DP-IMRT proved feasible, the high pretreatment planning revision rate emphasizes the importance of real-time radiation quality assurance for IMRT trials.

  13. Recherche du boson de Higgs du nideke standard dans le canal ZH->e+e-b$\\bar{b}$ avec le detecteur DØ aupres du Tevatron

    SciTech Connect (OSTI)

    Calpas, Betty Constante

    2010-06-11

    The organization of this thesis consists of three main ideas: the first presents the theoretical framework and experimental, as well as objects used in the analysis and the second relates to the various work tasks of service that I performed on the calorimeter, and the third is the search for the Higgs boson in the channel ZH → e+e-b$\\bar{b}$. Thus, this thesis has the following structure: Chapter 1 is an introduction to the standard model of particle physics and the Higgs mechanism; Chapter 2 is an overview of the complex and the acceleration of the Tevatron at Fermilab DØ detector; Chapter 3 is an introduction to physical objects used in this thesis; Chapter 4 presents the study made on correcting the energy measured in the calorimeter; Chapter 5 describes the study of certification of electrons in the calorimeter; Chapter 6 describes the study of certification of electrons in the intercryostat region of calorimeter; Chapter 7 Detailed analysis on the search for Higgs production in the channel ZH → e+e-b$\\bar{b}$; and Chapter 8 presents the final results of the calculations of upper limits to the production cross section of the Higgs boson on a range of low masses.

  14. DOE-Idaho Operations Summary For September 28 to October 18,...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... management and an electrician found 110 volts passing between the control panels. ... a seal on the canal bulkhead for the spent nuclear fuel storage canal at the Advanced Test ...

  15. Movement of Fall Chinook Salmon Fry Oncorhynchus Tshawytscha : A Comparison of Approach Angles for Fish Bypass in a Modular Rotary Drum Fish Screen.

    SciTech Connect (OSTI)

    Neitzel, D.A.; Blanton, S.L.; Abernethy, C. Scott; Daly, D.S.

    1996-08-01

    The Pacific Northwest National Laboratory (PNNL) performed tests to determine whether a significant difference in fish passage existed between a 6-ft screening facility built perpendicularly to canal flow and an identical screening facility with the screen mounted at a 45-degree angle to the approach channel. A modular drum screen built by the Washington Department of Fish and Wildlife was installed at PNNL`s Aquatic Ecology research laboratory in Richland, Washington. Fall chinook salmon fry were introduced into the test system, and their movements were monitored. A total of 14 tests (400 fish per test) that lasted 20 hours were completed during April and May, 1996. There was no significant difference in fish passage rate through the two approach configurations. Attraction flow to the bypass across the face of the screen was more evident for the angled approach, although this did not appear to play a significant role in attracting fish to the bypass. Approach velocities at the face of the screen did not exceed the 0.4 fps criteria for either approach configuration and posed not threat to fish. No fish passed over, around, or through the drum screen during any test.

  16. 2012 Archives-News-PHaSe-EFRC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Archives Tom Russell photo Joint work by Tom Russell, Alex Briseno, and coworkers describes fabrication and a significant degree of device optimization of a low band polymer pDPP/PCBM solar cell, in an article published in Advanced Materials. Photoconversion efficiency up to 5.6% with a fill factor of 60% were obtained. Morphology control based on solvent mixture tuning was critically important for best electrical output. [read more] PHaSE members D. Venkataraman and Tom Russell have edited a

  17. Inquiring Minds - Questions About Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Particles from Batavia to Soudan Tom, You asked: I have been reading various pages on the Fermi website and I'm unclear how the particles to be tested get from Batavia to Soudan. Is there a physical connection like a pipeline or is this something that just happens through the earth? Sorry for what's probably a very basic question but I couldn't quite understand that point. Are there articles that explain how this happens? Thanks! Tom Hi Tom, I am a physicist working on the NuMI/MINOS project

  18. November

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    November November We are your source for reliable, up-to-date news and information; our scientists and engineers can provide technical insights on our innovations for a secure nation. Carlos Tomé Tomé to receive Khan International Medal The International Journal of Plasticity recognized Tomé for his "outstanding life-long contributions in the field of plasticity." - 11/18/15 Usnea lichens are common in New Mexico. Lichens detect past fallout The team conducted this investigation to

  19. This Week In Petroleum Printer-Friendly Version

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6, 2008 (Next Release on January 24, 2008) Comparing the Present to the Past Tom Brady and Brett Favre, each just one game away from making it to the Super Bowl, are both sure to...

  20. NERSC, PDSF, Neutrino Oscillations and the 2015 Physics Nobel...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on a visualization of results from the SNO experiment: (R-L) Steve Chan, Shane Canon, Cary Whitney, Iwona Sakrejda, and Tom Langley. The experiment wound down in 2006, but...

  1. ARM - Field Campaign - Shortwave Radiation and Aerosol Intensive...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    with the G1 team and Tom Charlock will take place on 813 at 9 am at the Ponca City airport to determine possible flight times for the G1 in conjunction with these...

  2. SUSANA MARTINEZ Governor JOHN A SANCHEZ Lieutenant Governor

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RYAN FLYNN Cabinet Secretary BUTCHTONGATE Deputy Secretary TOM BLAINE, P.E. Director Jose Franco, Manager Carlsbad Field Office Department of Energy P.O. Box 3090 Robert L....

  3. SUSANA MARTINEZ Governor JOHN A. SANCHEZ Lieutenant Governor

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BUTCH TONGATE Deputy Secretary TOM BLAIN E, P.E. Director Environmental Health Division Jose R. Franco, Manager Carlsbad Field Office Department of Energy Robert L. McQuinn,...

  4. Big Bang Day : Today

    SciTech Connect (OSTI)

    2009-11-16

    Andrew Marr will be reporting live from the CERN control room for the Today programme, with correspondent Tom Feilden. (Wednesday 10th September, 6.00-9.00am )

  5. QER- Comment of American Wind Energy Association 1

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached please find the comments of the American Wind Energy Association (AWEA) on the QER. Please don’t hesitate to contact me if you have any questions. Thank you. Tom

  6. NAME ORGANIZATION E-MAIL PHONE

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (865) 574-2105 (Alternate) Miller, Ruth Oak Ridge Nat'l Laboratory ... Ashley, Tom CWI, Idaho Cleanup Project thomas.ashley@icp.doe.gov (208) 360-3552 McGary, ...

  7. Update on DOE/NNSA Long Term Stewardship Programs

    Broader source: Energy.gov [DOE]

    At the August 13, 2014 Committee meeting Tom Longo DOE, Explained What the Office of Legacy Management Does and how the Sites Across the DOE Complex are Managed for Long Term Stewardship.

  8. NNMCAB Board Minutes: March 2013 Albuquerque

    Broader source: Energy.gov [DOE]

    Minutes of the March 20, 2013 Board meeting at Marriott Pyramid Presentation DOE, Results of the LANL Aerial Radiation Survey, Tom Carver Presentation DOE/LANS, Status of the TA-54 33 Shafts, Dave Nickless, Dan Cox

  9. Testimony before the House Appropriations Committee, Subcommittee...

    National Nuclear Security Administration (NNSA)

    04, 2010 Administrator Thomas D'Agostino As Prepared for Delivery Thank you Mr. Chairman. I am Tom D'Agostino, the Under Secretary of Energy for Nuclear Security, and the ...

  10. Energy Storage Systems 2014 Peer Review Presentations - Session...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PNNL (1.83 MB) Redox Flow Battery Optimization - Tom Zawodzinski, ORNL (930.87 KB) ... - Day 3, Session 2 Transitioning from Fuel Cells to Redox Flow Cells Flow Batteries: A ...

  11. FCC Pilot Plant Results with Vegetable Oil and Pyrolysis Oil Feeds

    Office of Energy Efficiency and Renewable Energy (EERE)

    Breakout Session 2: Frontiers and Horizons Session 2–D: Working Together: Conventional Refineries and Bio-Oil R&D Technologies E. Thomas (Tom) Habib, Jr., Director, Customer Research Partnerships, W.R. Grace & Co.

  12. SSRL HEADLINES April 2012

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SSRL Weathers Power Outage Caused by Lightning by John Schmerge and Tom Rabedeau Friday the 13th arrived about 90 minutes early on Thursday night when a rare Bay Area electrical ...

  13. STEAB Meeting Agenda August 2008

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Joel Serface (EIR) 12:00 Lunch (provided in meeting room) 1 1:00 Sandia National Lab (SNL) Technology Transfer Update: Brent Burdick (SNL) & Tom Brennan (EIR) 2:00 STEAB-NREL ...

  14. December 4, 2008; HSS/Union Working Group Meeting on 2008 HSS...

    Broader source: Energy.gov (indexed) [DOE]

    Union Working Group Meeting December 4, 2008 1:00 - 4:00 pm EST FORS 7E-069 SUBJECT: 2008 HSSUnion Topical Wrap Up Meeting Facilitation by 2008 Topical Union Leads Ron AultTom ...

  15. Final Meeting Summary Page 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Neath, DOE-RL Nina Menard, Ecology Brett Watson, EnviroIssues Kris Skopeck, DOE-RL Tom Rodgers, WDOH Jen Copeland, MSA Mike Truex, PNNL Kelsey Bondelid, SN3 Annette Cary, Tri-City...

  16. Technical Standards Managers

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... NNSA Service Center Albuquerque, NM Phone: (505) 845-5096 kdelman@doeal.gov ORAU Tom Wantland TSM Oak Ridge Associated Universi es (ORISE) Oak Ridge Ins tute for Science & Educ. ...

  17. Final Meeting Summary Page 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mark McKenna, MSA Deborah Singleton, Ecology Rick Moren, MSA Tom Rodgers, WDOH Sharon Braswell, NorthwindDOE-ORP (phone) Pedro de la Torre III, RPI Annette Cary, Tri-City Herald...

  18. Y-12 Construction maintains 'superb' safety performance | Y-12...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Construction maintains ... Y-12 Construction maintains 'superb' safety performance Posted: March 6, 2013 - 6:03pm Tom Morris, B&W Y-12 vice president of projects, presents ...

  19. U.S. Energy Information Administration (EIA)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Consumption survey form: EIA-846, Manufacturing Energy Consumption Survey Form Please comment by July 22, 2014. Contacts Tom Lorenz, Thomas.Lorenz@eia.doe.gov, (202) 586-3442...

  20. Tuesday, June 15, 2010 | National Nuclear Security Administration...

    National Nuclear Security Administration (NNSA)

    the July 2009 Summit. --Tom D'Agostino View photos offsite link from today's meetings and the rest of the Administrator's trip: Administrator D'Agostino with DOE Moscow staff

  1. Sunrayce 97 Continues Day 5 - Lee's Summit to Manhattan

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    said Tom Sheffler, Sunrayce 97 Co-Director. "After a rest day yesterday, everyone was ready to go today" he said, "Hearing the crowds cheer the teams on was certainly gratifying." ...

  2. August 2013 Electrical Safety Occurrences

    Energy Savers [EERE]

    Notified Tom Robinson Don Dihel Organization BWCS DOE PPPO Authorized Classifier(AC): Michael Stanley Date: 08212013 3)Report Number: EM-RL--CPRC-GPP-2013-0005 After 2003...

  3. SITE

    Office of Legacy Management (LM)

    ... from thorium, fast plutonium breeders ,e&ning fuel that can be processed simply, pressurized water re- % tom with Iong-life fuel elements, and sodium-graphite reactors vvith ...

  4. ARM - Field Campaign - Remote Cloud Sensing (RCS) Field Evaluation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IOP" Other Contacts Robert KropfliTom AckermanKenneth SassenAndrew HeymsfieldJohn Goldsmith, Lead Scientists Connor Flynn, DSIT Contact Campaign Data Sets IOP Participant Data...

  5. Building the DOE Systems Biology Knowledgebase (KBase) ( 7th Annual SFAF Meeting, 2012)

    ScienceCinema (OSTI)

    Brettin, Tom [Oak Ridge National Laboratory

    2013-03-22

    Tom Brettin on "Building the DOE Systems Biology Knowledgebase (KBase)" at the 2012 Sequencing, Finishing, Analysis in the Future Meeting held June 5-7, 2012 in Santa Fe, New Mexico.

  6. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Filter by Author Huang, Jian (3) Kendall, Wesley (3) Glatter, Markus (2) Bernholdt, David E (1) Johnson, C. Ryan (1) Moreland, Kenneth D. (1) Peterka, Tom (1) Save Results Save ...

  7. ARM XDC Datastreams

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Total Ozone Mapping Spectrometer Citable References Torres, O., P.K. Bhartia ,J.R. Herman, A. Sinyuk and B. Holben, A long term record of aerosol optical thickness from TOMS...

  8. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Reynolds, Daniel R. (2) Skillman, Samuel W. (2) Smith, Britton (2) Tasker, Elizabeth (2) ... ; Kritsuk, Alexei G. ; O'Shea, Brian W. ; Smith, Britton ; Abel, Tom ; Wang, Peng ; et al ...

  9. ENZO: AN ADAPTIVE MESH REFINEMENT CODE FOR ASTROPHYSICS (Journal...

    Office of Scientific and Technical Information (OSTI)

    Authors: Bryan, Greg L. ; Turk, Matthew J. 1 ; Norman, Michael L. ; Bordner, James ; Xu, Hao ; Kritsuk, Alexei G. 2 ; O'Shea, Brian W. ; Smith, Britton 3 ; Abel, Tom ; Wang, ...

  10. Thomas Moore | Photosynthetic Antenna Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Thomas Moore Thomas Moore Thomas Moore Thomas Moore Scientific Advisory Committee Chair E-mail: tom.moore@asu.edu Phone: 480.965.3308 Fax: 480.965.2747 Website: Arizona State...

  11. Models on Distributed Memory Architectures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... n NCAR: Tony Craig, Brian Kauffman, Vince Wayland, Tom Bettge n Argonne National Lab: Rob Jacobs, Jay Larson n Resources n DOE SciDAC Climate Project n NERSC Program

  12. Y-12 and the 2000 decade … Modernization to Transformation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transformation Tom Smith, who for a number of years has led the forward thinking and long-range planning functions at Y-12, observed the following about the Infrastructure ...

  13. 2016 Connected Lighting Systems Workshop Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    MICHAL KOENIG, QUALCOMM SHANE DEWING, INTEL HIMANSHU MEHRA, CISCO SYSTEMS 10:00 a.m. ... SHARER, FULHAM SEAN TIPPETT, SILVER SPRING NETWORKS TOM HERBST, CISCO SYSTEMS 2:00 p.m. ...

  14. DOE Science Showcase - Particle Physics | OSTI, US Dept of Energy...

    Office of Scientific and Technical Information (OSTI)

    Energy Citations Database DOE R&D Accomplishments DOE Data Explorer ScienceCinema Science.... the Higgs, BNL ANL particle physicist Tom LeCompte Visit the Science Showcase homepage.

  15. Bradbury Science Museum

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    15 The team in front of the Trident Target Chamber. Back, from left: Tom Shimada, Sha-Marie Reid, Adam Sefkow, Miguel Santiago, and Chris Hamilton. Front, from left: Russ...

  16. Energy Efficiency in State Facilities

    Broader source: Energy.gov [DOE]

    In April 2005 Iowa governor Tom Vilsack issued Executive Order No. 41, directing state agencies to reduce electricity and natural gas use in buildings by an average of 15% by 2010, relative to th...

  17. Slide 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tom Stoffel, Mary Anderberg, Pamela Gray-Hann National Renewable Energy Laboratory, Golden, Colorado Conclusions Cloud Free Over Study Area GOES-E Images 2 January 2006 11:15 CST ...

  18. This Week In Petroleum Printer-Friendly Version

    Gasoline and Diesel Fuel Update (EIA)

    run last night, but this past Sunday, Tom Glavine became the 23rd player to win 300 games, while just a day before that, Alex Rodriguez was the 22nd player to reach the 500...

  19. EM Quality Assurance Assessment Schedule FY 2010

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... R. Tom, EM-23 M. Giltatson, EM-50 A. Holland, CBFO G. Girard, ORP P. Carier, ORP C. ... Idaho Operations Office (ID) Ralph E. Holland, Acting Director, Consolidated Business ...

  20. UCRL-MI-224010 ARM-06-012 ARM's Support for GCM Improvement:...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE should invest in the "super-parameterization" modeling approach. Tom Ackerman, Bill Collins, Steve Ghan, Jean-Jacques Morcrette, and Hualu Pan are thanked for their input. 7...