Sample records for mount pleasant neola

  1. Monticello Steam Electric Station, Mount Pleasant, Texas

    SciTech Connect (OSTI)

    Javetski, J. [TXU Power (United States)

    2006-07-15T23:59:59.000Z

    Why does Monticello, a 30 year old plant, deserve recognition as one of Power's Top Plants of 2006? Because TXU has been blending Powder River Basin (PRB) coal with local lignite at the plant for the past decade, and steady reductions in air-pollutant emission rates have been the result. That positive experience has made the company confident enough to propose building nearly 9,100 MW of new coal or lignite-fired capacity in Texas by 2010 at a cost of $10 billion. The article records some of the lessons that TXU has learned about handling PRB coal safely. 4 figs., 3 tabs.

  2. Mount Pleasant, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,WaveLebanon,York:

  3. Pleasant Prairie Power Plant air quality control upgrade project, Pleasant Praire, Wisconsin

    SciTech Connect (OSTI)

    Gebhart, S.; Pennline, D.; Brodsky, I.; Bichler, D. [Washington Group International (United States)

    2007-10-15T23:59:59.000Z

    We Energies recently completed a multiyear project at its Pleasant Prairie Power Plant to add a selective catalytic reduction system to one of its two units and a scrubber to both. These projects are described. 7 figs., 1 tab.

  4. Mirror mount

    DOE Patents [OSTI]

    Humpal, H.H.

    1986-03-21T23:59:59.000Z

    A mirror mount is provided that allows free pitch, yaw and roll motion of the mirror while keeping the location of a point on the surface of the mirror fixed in the rest frame of reference of the mount. Yaw movement is provided by two yaw cylinders that are bearing mounted to provide rotation. Pitch and roll motion is provided by a spherically annular shell that is air bearing mounted to move between a clamp and an upper pedestal bearing. The centers of curvature of the spherical surfaces of the shell lie upon the point. Pitch motion and roll motion are separately and independently imparted to mirror by a pair of pitch paddles and a pair of roll paddles that are independently and separately moved by control rods driven by motors.

  5. Mirror mount

    DOE Patents [OSTI]

    Humpal, H.H.

    1987-11-10T23:59:59.000Z

    A mirror mount is provided that allows free pitch, yaw and roll motion of the mirror while keeping the location of a point on the surface of the mirror fixed in the rest frame of reference of the mount. Yaw movement is provided by two yaw cylinders that are bearing mounted to provide rotation. Pitch and roll motion is provided by a spherically annular shell that is air bearing mounted to move between a clamp and an upper pedestal bearing. The centers of curvature of the spherical surfaces of the shell lie upon the point. Pitch motion and roll motion are separately and independently imparted to mirror by a pair of pitch paddles and a pair of roll paddles that are independently and separately moved by control rods driven by motors. 5 figs.

  6. Mirror mount

    DOE Patents [OSTI]

    Kuklo, T.C.; Bender, D.A.

    1994-10-04T23:59:59.000Z

    A unique lens or mirror mount having adjustable constraints at two key locations to allow for ''X'' and ''Y'' tilts of the mirror only is disclosed. The device uses two pair of flexures of a type such that the pivots of the mirror gimble are rigidly fixed in all planes allowing the device to have zero stacking tolerance and zero wear over time. 4 figs.

  7. Testing of the Pleasant Bayou Well through October 1990

    SciTech Connect (OSTI)

    Randolph, P.L.; Hayden, C.G.; Mosca, V.L.; Anhaiser, J.L.

    1992-08-01T23:59:59.000Z

    Pleasant Bayou location was inactive from 1983 until the cleanout of the production and disposal wells in 1986. The surface facilities were rehabilitated and after shakedown of the system, additional repair of wellhead valves, and injection of an inhibitor pill, continuous long-term production was started in 1988. Over two years of production subsequent to that are reviewed here, including: production data, brine sampling and analysis, hydrocarbon sampling and analysis, solids sampling and analysis, scale control and corrosion monitoring and control.

  8. Point Pleasant, New Jersey: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S6665°,Jump to:Pleasant, New Jersey: Energy

  9. City of Mt Pleasant, Utah (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovationin Urban TransportMartinsville,Minidoka,City ofIowaMt Pleasant,

  10. PV module mounting method and mounting assembly

    DOE Patents [OSTI]

    Lenox, Carl J.S.; Johnson, Kurt M.

    2013-04-23T23:59:59.000Z

    A method for mounting PV modules to a deck includes selecting PV module layout pattern so that adjacent PV module edges are spaced apart. PV mounting and support assemblies are secured to the deck according to the layout pattern using fasteners extending into the deck. The PV modules are placed on the PV mounting and support assemblies. Retaining elements are located over and secured against the upper peripheral edge surfaces of the PV modules so to secure them to the deck with the peripheral edges of the PV modules spaced apart from the deck. In some examples a PV module mounting assembly, for use on a shingled deck, comprises flashing, a base mountable on the flashing, a deck-penetrating fastener engageable with the base and securable to the deck so to secure the flashing and the base to the shingled deck, and PV module mounting hardware securable to the base.

  11. Magnetic core mounting system

    DOE Patents [OSTI]

    Ronning, Jeffrey J. (Fishers, IN)

    2002-01-01T23:59:59.000Z

    A mounting apparatus for an electromagnetic device such as a transformer of inductor includes a generally planar metallic plate as a first heat sink, and a metallic mounting cup as a second heat sink. The mounting cup includes a cavity configured to receive the electromagnetic device, the cavity being defined by a base, and an axially-extending annular sidewall extending from the base to a flange portion of the mounting cup. The mounting cup includes first and second passages for allowing the leads of first and second windings of the electromagnetic device to be routed out of the cavity. The cavity is filled with a polyurethane potting resin, and the mounting cup, including the potted electromagnetic device, is mounted to the plate heat sink using fasteners. The mounting cup, which surrounds the electromagnetic device, in combination with the potting resin provides improved thermal transfer to the plate heat sink, as well as providing resistance to vibration and shocks.

  12. Photovoltaic module mounting system

    DOE Patents [OSTI]

    Miros, Robert H. J. (Fairfax, CA); Mittan, Margaret Birmingham (Oakland, CA); Seery, Martin N. (San Rafael, CA); Holland, Rodney H. (Novato, CA)

    2012-04-17T23:59:59.000Z

    A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

  13. Photovoltaic module mounting system

    DOE Patents [OSTI]

    Miros, Robert H. J.; Mittan, Margaret Birmingham; Seery, Martin N; Holland, Rodney H

    2012-09-18T23:59:59.000Z

    A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

  14. High bandwidth optical mount

    SciTech Connect (OSTI)

    Bender, D.A.; Kuklo, T.

    1994-11-08T23:59:59.000Z

    An optical mount, which directs a laser beam to a point by controlling the position of a light-transmitting optic, is stiffened so that a lowest resonant frequency of the mount is approximately one kilohertz. The optical mount, which is cylindrically-shaped, positions the optic by individually moving a plurality of carriages which are positioned longitudinally within a sidewall of the mount. The optical mount is stiffened by allowing each carriage, which is attached to the optic, to move only in a direction which is substantially parallel to a center axis of the optic. The carriage is limited to an axial movement by flexures or linear bearings which connect the carriage to the mount. The carriage is moved by a piezoelectric transducer. By limiting the carriage to axial movement, the optic can be kinematically clamped to a carriage. 5 figs.

  15. Stable mirror mount

    DOE Patents [OSTI]

    Cutburth, R.W.

    1983-11-04T23:59:59.000Z

    An improved mirror mount assembly is disclosed. The mirror mount assembly provides a post assembly slidable in a Y-axis orientation and a nut plate assembly slidable in an X-axis orientation and means for simultaneously locking said post assembly and said key assembly in a fixed position.

  16. Mounting for ceramic scroll

    DOE Patents [OSTI]

    Petty, Jack D. (Indianapolis, IN)

    1993-01-01T23:59:59.000Z

    A mounting for a ceramic scroll on a metal engine block of a gas turbine engine includes a first ceramic ring and a pair of cross key connections between the first ceramic ring, the ceramic scroll, and the engine block. The cross key connections support the scroll on the engine block independent of relative radial thermal growth and for bodily movement toward an annular mounting shoulder on the engine. The scroll has an uninterrupted annular shoulder facing the mounting shoulder on the engine block. A second ceramic ring is captured between mounting shoulder and the uninterrupted shoulder on the scroll when the latter is bodily shifted toward the mouting shoulder to define a gas seal between the scroll and the engine block.

  17. Housing And Mounting Structure

    DOE Patents [OSTI]

    Anderson, Gene R. (Albuquerque, NM); Armendariz, Marcelino G. (Albuquerque, NM); Baca, Johnny R.F. (Albuquerque, NM); Bryan, Robert P. (Albuquerque, NM); Carson, Richard F. (Albuquerque, NM); Duckett, III, Edwin B. (Albuquerque, NM); McCormick, Frederick B. (Albuquerque, NM); Miller, Gregory V. (Kansas City, MO); Peterson, David W. (Sandia Park, NM); Smith, Terrance T. (Albuquerque, NM)

    2005-03-08T23:59:59.000Z

    This invention relates to an optical transmitter, receiver or transceiver module, and more particularly, to an apparatus for connecting a first optical connector to a second optical connector. The apparatus comprises: (1) a housing having at least a first end and at least a second end, the first end of the housing capable of receiving the first optical connector, and the second end of the housing capable of receiving the second optical connector; (2) a longitudinal cavity extending from the first end of the housing to the second end of the housing; and (3) an electromagnetic shield comprising at least a portion of the housing. This invention also relates to an apparatus for housing a flexible printed circuit board, and this apparatus comprises: (1) a mounting structure having at least a first surface and a second surface; (2) alignment ridges along the first and second surfaces of the mounting structure, the alignment ridges functioning to align and secure a flexible printed circuit board that is wrapped around and attached to the first and second surfaces of the mounting structure; and (3) a series of heat sink ridges adapted to the mounting structure, the heat sink ridges functioning to dissipate heat that is generated from the flexible printed circuit board.

  18. Plasma Screen Floating Mount

    DOE Patents [OSTI]

    Eakle, Robert F. (New Ellenton, SC); Pak, Donald J. (Martine, GA)

    2004-10-26T23:59:59.000Z

    A mounting system for a flat display screen, particularly a plasma display screen, suspends the screen separately in each of the x-, y- and z-directions. A series of frames located by linear bearings and isolated by springs and dampers allows separate controlled movement in each axis. The system enables the use of relatively larger display screens in vehicles in which plasma screen are subject to damage from vibration.

  19. City of Neola, Iowa (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovationin Urban TransportMartinsville,Minidoka,CityCity ofCity

  20. Product Sheet Wall Mount Lift

    E-Print Network [OSTI]

    Saskatchewan, University of

    Product Sheet Wall Mount Lift Ergotron® Neo-FlexTM 870-05-061, rev. 12/11/07 www. Less effort. Feel the difference. Add greater range of movement to your LCD display or TV with the Neo-Flex Wall Mount Lift! CF patented lift-and-pivot motion technology adjusts with a light touch. Raise

  1. Mounting support for a photovoltaic module

    DOE Patents [OSTI]

    Brandt, Gregory Michael; Barsun, Stephan K.; Coleman, Nathaniel T.; Zhou, Yin

    2013-03-26T23:59:59.000Z

    A mounting support for a photovoltaic module is described. The mounting support includes a foundation having an integrated wire-way ledge portion. A photovoltaic module support mechanism is coupled with the foundation.

  2. Holding fixture for metallographic mount polishing

    DOE Patents [OSTI]

    Barth, C.H.; Cramer, C.E.

    1997-12-30T23:59:59.000Z

    A fixture is described for holding mounted specimens for polishing, having an arm; a body attached to one end of the arm, the body having at least one flange having an opening to accommodate a mounted specimen; and a means applying pressure against the outer surface of the mounted specimen to hold the specimen in contact with the polishing surface. 3 figs.

  3. Pleasant Bayou geopressured/geothermal testing project, Brazoria County, Texas. Final report

    SciTech Connect (OSTI)

    Ortego, P.K.

    1985-07-01T23:59:59.000Z

    Phase II-B production testing of the Pleasant Bayou No. 2 well began September 22, 1982. The test plan was designed to evaluate the capabilities of the geopressured-geothermal reservoir during an extended flow period. Tests were conducted to determine reservoir areal extent; aquifer fluid properties; fluid property change with production; information on reservoir production drive mechanism; long-term scale and corrosion control methods; and disposal well operations. Operatinal aspects of geopressured-geothermal production were also evaluated. The test was discontinued prematurely in May 1983 because of a production tubing failure. Most of the production tubing was recovered from the well and cause of the failure was determined. Plans for recompletion of the well were prepared. However, the well was not recompleted because of funding constraints and/or program rescheduling. In March 1984, the Department of Energy, Nevada Operations Office (DOE/NV) directed that the site be placed in a standby-secured condition. In August 1984, the site was secured. Routine site maintenance and security was provided during the secured period.

  4. Dual resolution, vacuum compatible optical mount

    DOE Patents [OSTI]

    Halpin, John Michael (Tracy, CA)

    2011-10-04T23:59:59.000Z

    An optical mount for an optical element includes a mounting plate, a lever arm pivot coupled to mounting plate, and an adjustment plate. The optical mount also includes a flexure pivot mechanically coupling the adjustment plate to the mounting plate and a lever arm. The optical mount further includes a first adjustment device extending from the adjustment plate to make contact with the lever arm at a first contact point. A projection of a line from the first contact point to a pivot point, measured along the lever arm, is a first predetermined distance. The optical mount additionally includes a second adjustment device extending from the adjustment plate to make contact with the lever arm at a second contact point. A projection of a line from the second contact point to the pivot point, measured along the lever arm, is a second predetermined distance greater than the first predetermined distance.

  5. Nozzle and shroud assembly mounting structure

    DOE Patents [OSTI]

    Faulder, L.J.; Frey, G.A.; Nielsen, E.W.; Ridler, K.J.

    1997-08-05T23:59:59.000Z

    The present nozzle and shroud assembly mounting structure configuration increases component life and reduces maintenance by reducing internal stress between the mounting structure having a preestablished rate of thermal expansion and the nozzle and shroud assembly having a preestablished rate of thermal expansion being less than that of the mounting structure. The mounting structure includes an outer sealing portion forming a cradling member in which an annular ring member is slidably positioned. The mounting structure further includes an inner mounting portion to which a hooked end of the nozzle and shroud assembly is attached. As the inner mounting portion expands and contracts, the nozzle and shroud assembly slidably moves within the outer sealing portion. 3 figs.

  6. Nozzle and shroud assembly mounting structure

    DOE Patents [OSTI]

    Faulder, Leslie J. (San Diego, CA); Frey, deceased, Gary A. (late of Seattle, WA); Nielsen, Engward W. (El Cajon, CA); Ridler, Kenneth J. (San Diego, CA)

    1997-01-01T23:59:59.000Z

    The present nozzle and shroud assembly mounting structure configuration increases component life and reduces maintenance by reducing internal stress between the mounting structure having a preestablished rate of thermal expansion and the nozzle and shroud assembly having a preestablished rate of thermal expansion being less than that of the mounting structure. The mounting structure includes an outer sealing portion forming a cradling member in which an annular ring member is slidably positioned. The mounting structure further includes an inner mounting portion to which a hooked end of the nozzle and shroud assembly is attached. As the inner mounting portion expands and contracts, the nozzle and shroud assembly slidably moves within the outer sealing portion.

  7. Bulb mounting of solar cell

    SciTech Connect (OSTI)

    Thompson, M.E.

    1983-04-05T23:59:59.000Z

    An energy converting assembly is provided for parasiting of light from a fluorescent light bulb utilizing a solar cell. The solar cell is mounted on a base member elongated in the dimension of elongation of the fluorescent bulb, and electrical interconnections to the cell are provided. A flexible sheet of opaque material having a flat white interior reflective surface surrounds the fluorescent bulb and reflects light emitted from the bulb back toward the bulb and the solar cell. The reflective sheet is tightly held in contact with the bottom of the bulb by adhesive, a tie strap, an external clip, or the like.

  8. Tape Mounts Last 30 Days

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening a solidSynthesis of 2D AlloysTrails TakingRTape Mounts Last 30

  9. Three-point spherical mirror mount

    DOE Patents [OSTI]

    Cutburth, R.W.

    1984-01-23T23:59:59.000Z

    A three-point spherical mirror mount for use with lasers is disclosed. The improved mirror mount is adapted to provide a pivot ring having an outer surface with at least three spaced apart mating points to engage an inner spherical surface of a support housing.

  10. Motorized control for mirror mount apparatus

    DOE Patents [OSTI]

    Cutburth, Ronald W. (Tracy, CA)

    1989-01-01T23:59:59.000Z

    A motorized control and automatic braking system for adjusting mirror mount apparatus is disclosed. The motor control includes a planetary gear arrangement to provide improved pitch adjustment capability while permitting a small packaged design. The motor control for mirror mount adjustment is suitable for laser beam propagation applications. The brake is a system of constant contact, floating detents which engage the planetary gear at selected between-teeth increments to stop rotation instantaneously when the drive motor stops.

  11. Department of Veterans Affairs, FONSI - Ground mounted solar...

    Office of Environmental Management (EM)

    Ground mounted solar photovoltaic power at San Joaquin National Cemetery Department of Veterans Affairs, FONSI - Ground mounted solar photovoltaic power at San Joaquin National...

  12. Twin Cities Campus The Aurora Center for Advocacy & Education 128 Pleasant St. SE Office for Student Affairs Suite 117 Appleby Hall

    E-Print Network [OSTI]

    Blanchette, Robert A.

    Campus The Aurora Center for Advocacy & Education 128 Pleasant St. SE Office for Student Affairs Suite Prospective Volunteer, Thank you for your interest in being a volunteer with The Aurora Center for Advocacy and challenging work! The Aurora Center (TAC) provides free and confidential crisis intervention to victims

  13. Mount Amiata Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,Wave Group JumpMount Airy,Mount

  14. Photovoltaic module mounting clip with integral grounding

    DOE Patents [OSTI]

    Lenox, Carl J.

    2010-08-24T23:59:59.000Z

    An electrically conductive mounting/grounding clip, usable with a photovoltaic (PV) assembly of the type having an electrically conductive frame, comprises an electrically conductive body. The body has a central portion and first and second spaced-apart arms extending from the central portion. Each arm has first and second outer portions with frame surface-disrupting element at the outer portions.

  15. Fixture for mounting small parts for processing

    DOE Patents [OSTI]

    Foreman, Larry R. (2456 36th St., Los Alamos, NM 87544); Gomez, Veronica M. (Rte. 5 Box 283, Santa Fe, NM 87501); Thomas, Michael H. (Rte. 3-193-1, Espanola, NM 87532)

    1990-01-01T23:59:59.000Z

    A fixture for mounting small parts, such as fusion target spheres or microelectronic components. A glass stalk is drawn and truncated near its tip. The truncated end of the glass stalk is dipped into silicone rubber forming an extending streamer. After the rubber cures for approximately 24 hours, a small part is touched to the streamer, and will be held securely throughout processing.

  16. ROOM AIR CONDITIONER WALL MOUNTED type

    E-Print Network [OSTI]

    Kleinfeld, David

    SPLIT TYPE ROOM AIR CONDITIONER WALL MOUNTED type Reciprocating Compressor Models Indoor unit.6 - 11.4 ----- MOISTURE REMOVAL ( / hr) 2.0 1.8 2.7 2.7 4.3 3 AIR CIRCULATION - Hi (m / hr) 800 800 1

  17. Fixture for mounting small parts for processing

    DOE Patents [OSTI]

    Foreman, L.R.; Gomez, V.M.; Thomas, M.H.

    1990-05-29T23:59:59.000Z

    A fixture for mounting small parts, such as fusion target spheres or microelectronic components is disclosed. A glass stalk is drawn and truncated near its tip. The truncated end of the glass stalk is dipped into silicone rubber forming an extending streamer. After the rubber cures for approximately 24 hours, a small part is touched to the streamer, and will be held securely throughout processing. 5 figs.

  18. Conceptual design for PSP mounting bracket

    SciTech Connect (OSTI)

    Ransom, G.; Stein, R. [Martin Marietta Energy Systems, Inc., Piketon, OH (United States)

    1991-12-31T23:59:59.000Z

    Protective structural packages (PSP`s or overpacks) used to ship 2 1/2-ton UF{sub 6} product cylinders are bolted to truck trailers. All bolts penetrate two longitudinal rows of wooden planks. Removal and replacement is required at various intervals for maintenance and routine testing. A conceptual design is presented for mounting brackets which would securely attach PSP`s to trailer frames, reduce removal and replacement time, and minimize risk of personnel injury.

  19. Mounting apparatus for a nozzle guide vane assembly

    DOE Patents [OSTI]

    Boyd, G.L.; Shaffer, J.E.

    1995-09-12T23:59:59.000Z

    The present invention provides a ceramic nozzle guide assembly with an apparatus for mounting it to a metal nozzle case that includes an intermediate ceramic mounting ring. The mounting ring includes a plurality of projections that are received within a plurality of receptacles formed in the nozzle case. The projections of the mounting ring are secured within the receptacles by a ceramic retainer that allows contact between the two components only along arcuate surfaces thus eliminating sliding contact between the components. 8 figs.

  20. Mounting apparatus for a nozzle guide vane assembly

    DOE Patents [OSTI]

    Boyd, Gary L. (Alpine, CA); Shaffer, James E. (Maitland, FL)

    1995-01-01T23:59:59.000Z

    The present invention provides a ceramic nozzle guide assembly with an apparatus for mounting it to a metal nozzle case that includes an intermediate ceramic mounting ring. The mounting ring includes a plurality of projections that are received within a plurality of receptacles formed in the nozzle case. The projections of the mounting ring are secured within the receptacles by a ceramic retainer that allows contact between the two components only along arcuate surfaces thus eliminating sliding contact between the components.

  1. Photovoltaic module mounting clip with integral grounding

    DOE Patents [OSTI]

    Lenox, Carl J.

    2008-10-14T23:59:59.000Z

    An electrically conductive mounting/grounding clip, for use with a photovoltaic assembly of the type having an electrically conductive frame, comprises an electrically conductive body. The body has a central portion and first and second spaced-apart arms extending generally perpendicular to the central portion. Each arm has an outer portion with each outer portion having an outer end. At least one frame surface-disrupting element is at each outer end. The central portion defines a plane with the frame surface-disrupting elements pointing towards the plane. In some examples each arm extends from the central portion at an acute angle to the plane.

  2. Mount St. Mary's Abbey | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRose BendMiasole IncMinutemanVistaZephyr) JumpMorroMoultonMount

  3. Article mounting and position adjustment stage

    DOE Patents [OSTI]

    Cutburth, Ronald W. (Tracy, CA); Silva, Leonard L. (Livermore, CA)

    1988-01-01T23:59:59.000Z

    An improved adjustment and mounting stage of the type used for the detection of laser beams is disclosed. A ring sensor holder has locating pins on a first side thereof which are positioned within a linear keyway in a surrounding housing for permitting reciprocal movement of the ring along the keyway. A rotatable ring gear is positioned within the housing on the other side of the ring from the linear keyway and includes an oval keyway which drives the ring along the linear keyway upon rotation of the gear. Motor-driven single-stage and dual (x, y) stage adjustment systems are disclosed which are of compact construction and include a large laser transmission hole.

  4. Reusable vibration resistant integrated circuit mounting socket

    DOE Patents [OSTI]

    Evans, Craig N. (Irwin, PA)

    1995-01-01T23:59:59.000Z

    This invention discloses a novel form of socket for integrated circuits to be mounted on printed circuit boards. The socket uses a novel contact which is fabricated out of a bimetallic strip with a shape which makes the end of the strip move laterally as temperature changes. The end of the strip forms a barb which digs into an integrated circuit lead at normal temperatures and holds it firmly in the contact, preventing loosening and open circuits from vibration. By cooling the contact containing the bimetallic strip the barb end can be made to release so that the integrated circuit lead can be removed from the socket without damage either to the lead or to the socket components.

  5. Rack assembly for mounting solar modules

    DOE Patents [OSTI]

    Plaisted, Joshua Reed; West, Brian

    2012-09-04T23:59:59.000Z

    A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures to be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

  6. Rack assembly for mounting solar modules

    DOE Patents [OSTI]

    Plaisted, Joshua Reed (Oakland, CA); West, Brian (San Francisco, CA)

    2010-12-28T23:59:59.000Z

    A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures o be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

  7. Article mounting and position adjustment stage

    DOE Patents [OSTI]

    Cutburth, R.W.; Silva, L.L.

    1988-05-10T23:59:59.000Z

    An improved adjustment and mounting stage of the type used for the detection of laser beams is disclosed. A ring sensor holder has locating pins on a first side thereof which are positioned within a linear keyway in a surrounding housing for permitting reciprocal movement of the ring along the keyway. A rotatable ring gear is positioned within the housing on the other side of the ring from the linear keyway and includes an oval keyway which drives the ring along the linear keyway upon rotation of the gear. Motor-driven single-stage and dual (x, y) stage adjustment systems are disclosed which are of compact construction and include a large laser transmission hole. 6 figs.

  8. Photovoltaic array mounting apparatus, systems, and methods

    DOE Patents [OSTI]

    West, John Raymond; Atchley, Brian; Hudson, Tyrus Hawkes; Johansen, Emil

    2014-12-02T23:59:59.000Z

    An apparatus for mounting a photovoltaic (PV) module on a surface, including a support with an upper surface, a lower surface, tabs, one or more openings, and a clip comprising an arm and a notch, where the apparatus resists wind forces and seismic forces and creates a grounding electrical bond between the PV module, support, and clip. The invention further includes a method for installing PV modules on a surface that includes arranging supports in rows along an X axis and in columns along a Y axis on a surface such that in each row the distance between two neighboring supports does not exceed the length of the longest side of a PV module and in each column the distance between two neighboring supports does not exceed the length of the shortest side of a PV module.

  9. Rapid location of mount points JONATHAN M. SMITH

    E-Print Network [OSTI]

    ­­ ­­ Rapid location of mount points JONATHAN M. SMITH Computer Science Department, Columbia ``core'' is ``/u2/smith/core''. The current directory is a directory­valued variable. It is an implied traversal; the root contains itself. This scheme is extensible across multiple media through mount points

  10. Virtual sine arm kinematic mount system

    SciTech Connect (OSTI)

    Xu, Z.; Randall, K.J. [Argonne National Lab., IL (United States). Advanced Photon Source

    1997-09-01T23:59:59.000Z

    A novel kinematic mount system for a vertical focusing mirror of the soft x-ray spectroscopy beamline at the Advanced Photon Source is described. The system contains three points in a horizontal plane. Each point consists of two horizontal linear precision stages, a spherical ball bearing, and a vertical precision stage. The horizontal linear stages are aligned orthogonally and are conjoined by a spherical ball bearing, supported by the vertical linear stage at each point. The position of each confined horizontal stage is controlled by a motorized micrometer head by spring-loading the flat tip of the micrometer head onto a tooling ball fixing on the carriage of the stage. A virtual sine arm is formed by tilting the upstream horizontal stage down and the two downstream horizontal stages up by a small angle. The fine pitch motion is achieved by adjusting the upstream stage. This supporting structure is extremely steady due to a relatively large span across the supporting points and yields extremely high resolution on the pitch motion. With a one degree tilt and a microstepping motor, the authors achieved a 0.4 nanoradian resolution on the mirror pitch motion.

  11. Electro-optic component mounting device

    DOE Patents [OSTI]

    Gruchalla, M.E.

    1994-09-13T23:59:59.000Z

    A technique is provided for integrally mounting a device such as an electro-optic device in a transmission line to avoid series resonant effects. A center conductor of the transmission line has an aperture formed therein for receiving the device. The aperture splits the center conductor into two parallel sections on opposite sides of the device. For a waveguide application, the center conductor is surrounded by a conductive ground surface which is spaced apart from the center conductor with a dielectric material. One set of electrodes formed on the surface of the electro-optic device is directly connected to the center conductor and an electrode formed on the surface of the electro-optic device is directly connected to the conductive ground surface. The electrodes formed on the surface of the electro-optic device are formed on curved sections of the surface of the device to mate with correspondingly shaped electrodes on the conductor and ground surface to provide a uniform electric field across the electro-optic device. The center conductor includes a passage formed therein for passage of optical signals to an electro-optic device. 10 figs.

  12. Solar collector mounting and support apparatus

    SciTech Connect (OSTI)

    Hutchison, J.A.

    1981-12-22T23:59:59.000Z

    A solar collector system is described of the type having a movable surface for receiving solar radiation having improved means for rotatably supporting the movable surface and for rotating the collector surface. A support axle for the collector includes a ball at one end which is carried within a cylindrical sleeve in the solar collector to support the weight of the collector. A torque transmitting arm comprising a flexible flat strip is connected at one end to the axle and at the other end to the collector surface. An improved rotational drive mechanism includes a first sprocket wheel carried on the axle and a second sprocket wheel supported on a support pylon with a drive chain engaging both sprockets. A double acting piston also supported by the pylon is coupled to the chain so that the chain may be driven by a hydraulic control system to rotate the collector surfaces as required. An improved receiver tube support ring is also provided for use with the improved mounting and support apparatus to improve overall efficiency by reducing thermal losses.

  13. Laser housing having integral mounts and method of manufacturing same

    SciTech Connect (OSTI)

    Herron, Michael Alan; Brickeen, Brian Keith

    2004-10-19T23:59:59.000Z

    A housing adapted to position, support, and facilitate aligning various components, including an optical path assembly, of a laser. In a preferred embodiment, the housing is constructed from a single piece of material and broadly comprises one or more through-holes; one or more cavities; and one or more integral mounts, wherein the through-holes and the cavities cooperate to define the integral mounts. Securement holes machined into the integral mounts facilitate securing components within the integral mounts using set screws, adhesive, or a combination thereof. In a preferred method of making the housing, the through-holes and cavities are first machined into the single piece of material, with at least some of the remaining material forming the integral mounts.

  14. Methods and apparatus for radially compliant component mounting

    DOE Patents [OSTI]

    Bulman, David Edward (Cincinnati, OH); Darkins, Jr., Toby George (Loveland, OH); Stumpf, James Anthony (Columbus, IN); Schroder, Mark S. (Greenville, SC); Lipinski, John Joseph (Simpsonville, SC)

    2012-03-27T23:59:59.000Z

    Methods and apparatus for a mounting assembly for a liner of a gas turbine engine combustor are provided. The combustor includes a combustor liner and a radially outer annular flow sleeve. The mounting assembly includes an inner ring surrounding a radially outer surface of the liner and including a plurality of axially extending fingers. The mounting assembly also includes a radially outer ring coupled to the inner ring through a plurality of spacers that extend radially from a radially outer surface of the inner ring to the outer ring.

  15. SWET for the Summit: Exploration of Singapore’s First All-female Mount Everest Team

    E-Print Network [OSTI]

    Goh, Tan Leng

    2009-01-01T23:59:59.000Z

    FEMALE MOUNT EVEREST TEAM SWET for the Summit: ExplorationAll-female Mount Everest Team Tan Leng Goh California Statecommunity. The first all female team to summit Mount Everest

  16. alte madonie mounts: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the bag model also turned out to be negligible. Y. Kanazawa; Yuji Koike; N. Nishiyama 1999-02-18 22 Composite materials in dynamic shipboard structural mounts MIT - DSpace...

  17. Temporal Geochemical Variations In Volatile Emissions From Mount...

    Open Energy Info (EERE)

    Geochemical Variations In Volatile Emissions From Mount St Helens, Usa, 1980-1994 Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Temporal...

  18. Methane Hydrate Dissociation by Depressurization in a Mount Elbert Sandstone Sample: Experimental Observations and Numerical Simulations

    E-Print Network [OSTI]

    Kneafsey, T.

    2012-01-01T23:59:59.000Z

    DOE-USGS Mount Elbert gas hydrate stratigraphic test well:International Conference on Gas Hydrates, Vancouver, BritishGeologic controls on gas hydrate occurrence in the Mount

  19. Piezoelectric resonator assembly with thin molybdenum mounting clips

    DOE Patents [OSTI]

    Peters, R. Donald (Pinellas Park, FL)

    1981-01-01T23:59:59.000Z

    A resonator mounting assembly wherein the resonator blank is mounted agai an essentially planar surface presented by a plurality of peripherally disposed mounting clips and bonded to this surface to provide substantially all the mechanical support for the blank in a direction normal to the major faces of the resonator blank, while being flexible in the directions parallel to said major faces so as to minimize radial stresses on the resonator blank, particularly during thermal cycling of the resonator assembly. The clips are fabricated of a low thermal expansion material, such as molybdenum, which also has considerable yield strength after exposure to processing temperatures; the bonding of the clips to the edges of the resonator blank can be achieved by a polyimide containing electrically conductive particles.

  20. Integrated fiducial sample mount and software for correlated microscopy

    SciTech Connect (OSTI)

    Timothy R McJunkin; Jill R. Scott; Tammy L. Trowbridge; Karen E. Wright

    2014-02-01T23:59:59.000Z

    A novel design sample mount with integrated fiducials and software for assisting operators in easily and efficiently locating points of interest established in previous analytical sessions is described. The sample holder and software were evaluated with experiments to demonstrate the utility and ease of finding the same points of interest in two different microscopy instruments. Also, numerical analysis of expected errors in determining the same position with errors unbiased by a human operator was performed. Based on the results, issues related to acquiring reproducibility and best practices for using the sample mount and software were identified. Overall, the sample mount methodology allows data to be efficiently and easily collected on different instruments for the same sample location.

  1. Rolling contact mounting arrangement for a ceramic combustor

    DOE Patents [OSTI]

    Boyd, G.L.; Shaffer, J.E.

    1995-10-17T23:59:59.000Z

    A combustor assembly having a preestablished rate of thermal expansion is mounted within a gas turbine engine housing having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the combustor assembly. The combustor assembly is constructed of a inlet end portion, a outlet end portion and a plurality of combustor ring segments positioned between the end portions. A mounting assembly is positioned between the combustor assembly and the gas turbine engine housing to allow for the difference in the rate of thermal expansion while maintaining axially compressive force on the combustor assembly to maintain contact between the separate components. 3 figs.

  2. Rolling contact mounting arrangement for a ceramic combustor

    DOE Patents [OSTI]

    Boyd, Gary L. (328 Sneath Way, Alpine, CA 91901); Shaffer, James E. (1780 Geronimo Tr., Maitland, FL 32751)

    1995-01-01T23:59:59.000Z

    A combustor assembly having a preestablished rate of thermal expansion is mounted within a gas turbine engine housing having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the combustor assembly. The combustor assembly is constructed of a inlet end portion, a outlet end portion and a plurality of combustor ring segments positioned between the end portions. A mounting assembly is positioned between the combustor assembly and the gas turbine engine housing to allow for the difference in the rate of thermal expansion while maintaining axially compressive force on the combustor assembly to maintain contact between the separate components.

  3. Development and characterization for the automated surface mount assembly

    SciTech Connect (OSTI)

    Yerganian, S.S.; Grice, J.V.

    1996-11-01T23:59:59.000Z

    Development of the ability to automatically assemble surface mount devices on circuits is described, including the characterization of the assembly process and improvements made to the system to increase the accuracy and repeatability of this process. The accuracy and repeatability of the system were characterized by measurements of the individual system components as well as the actual placement of components on a specially designed gauge. The forces and stresses experienced by the components when handled by the system were analyzed. The ability to deliver surface mount components to the system was developed by the design and development of stick magazines, vibratory feeders, a feeder control system, and an automatic stick magazine loader.

  4. City of Mount Vernon, Missouri (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovationin Urban TransportMartinsville,Minidoka,City of Mount Dora,Mount

  5. Lunar Rover Solar Panel MountTeam Members: Tian Le, Tudor Boiangiu, Jeremy Chan, James Haensel To develop a mechanized mount for a solar panel to

    E-Print Network [OSTI]

    Lunar Rover Solar Panel MountTeam Members: Tian Le, Tudor Boiangiu, Jeremy Chan, James Haensel To develop a mechanized mount for a solar panel to be mounted on a lunar rover. Must be: · capable of orienting panel towards sun · reside on mast extending vertically from rover · capable of unfurling solar

  6. A rubber mount model. Application to automotive equipment suspension

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    A rubber mount model. Application to automotive equipment suspension B. Thomas1, 2 , L. Manin1.manin@insa-lyon.fr Abstract In order to predict the nonlinear dynamic response of automotive equipment supported by rubber identification of the model. The application concerns the suspension of an automotive engine cooling module. 1

  7. Apparatus for mounting photovoltaic power generating systems on buildings

    DOE Patents [OSTI]

    Russell, Miles C. (Lincoln, MA)

    2009-08-18T23:59:59.000Z

    Rectangular photovoltaic (PV) modules are mounted on a building roof by mounting stands that are distributed in rows and columns. Each stand comprises a base plate and first and second different height brackets attached to opposite ends of the base plate. Each first and second bracket comprises two module-support members. One end of each module is pivotally attached to and supported by a first module-support member of a first bracket and a second module-support member of another first bracket. At its other end each module rests on but is connected by flexible tethers to module-support members of two different second brackets. The tethers are sized to allow the modules to pivot up away from the module-support members on which they rest to a substantially horizontal position in response to wind uplift forces.

  8. Test probe for surface mounted leadless chip carrier

    DOE Patents [OSTI]

    Meyer, Kerry L. (Raytown, MO); Topolewski, John (Lenexa, KS)

    1989-05-23T23:59:59.000Z

    A test probe for a surface mounted leadless chip carrier is disclosed. The probed includes specially designed connector pins which allow size reductions in the probe. A thermoplastic housing provides spring action to ensure good mechanical and electrical contact between the pins and the contact strips of a leadless chip carrier. Other features include flexible wires molded into the housing and two different types of pins alternately placed in the housing. These features allow fabrication of a smaller and simpler test probe.

  9. Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project...

    Energy Savers [EERE]

    Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project Scoping and Feasibility Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project Scoping and Feasibility...

  10. Ventilation efficiencies and thermal comfort results of a desk-edge-mounted task ventilation system

    E-Print Network [OSTI]

    Faulkner, D.; Fisk, W.J.; Sullivan, D.P.; Lee, S.M.

    2003-01-01T23:59:59.000Z

    EDGE-MOUNTED TASK VENTILATION SYSTEM D Faulkner, WJ Fisk, DPDESK-EDGE-MOUNTED TASK VENTILATION SYSTEM D Faulkner * , WJcomfort of a task ventilation system with an air supply

  11. Mount Cheops Cirque Glacier: Response of a Small Debris Covered Glacier to Climate Change

    E-Print Network [OSTI]

    Smith, Dan

    Mount Cheops Cirque Glacier: Response of a Small Debris Covered Glacier of a microclimate cirque glacier on Mount Cheops in Glacier National Park of Canada. Rapidly receding glaciers are becoming an important water resource concern

  12. Ballast-mounted PV arrays: Phase 2 final report

    SciTech Connect (OSTI)

    Edward C. Kern

    2000-03-01T23:59:59.000Z

    The expansive flat rooftops of industrial and commercial buildings across America offer the largest, most secure, and potentially least-cost real estate opportunity to install massive amounts of solar photovoltaic generation in the building sector. Unfortunately, mechanical penetration of roofing membranes is very expensive and perceived by building owners and operators to increase the likelihood of leaking. In response Ascension Technology has pioneered the development of low-cost ballasted approaches for mounting PV arrays. Recently, however, we have experienced our first two instances in which strong winds have moved our arrays on rooftops and heightened our interest, and the PV industries' need, to develop zero-penetration mounting techniques that are more secure, yet remain low in cost. In this PV BONUS project, Ascension Technology and its partners addressed wind loading on solar panels and the suitability of using frictional forces between ballast trays and roofing materials to resist PV arrays sliding on rooftops. The primary goal of the project is to capture the potential cost savings made possible by ballast-mounting by showing under what conditions it can satisfy wind loading concerns. A secondary goal is to address a more geographically constrained concern regarding withstanding seismic forces.

  13. Test probe for surface mounted leadless chip carrier

    DOE Patents [OSTI]

    Meyer, K.L.; Topolewski, J.

    1987-10-02T23:59:59.000Z

    A test probe for a surface mounted leadless chip carrier is disclosed. The probe includes specially designed connector pins which allow size reductions in the probe. A thermoplastic housing provides spring action to ensure good mechanical and electrical contact between the pins and the contact strips of a leadless chip carrier. Other features include flexible wires molded into the housing and two different types of pins alternately placed in the housing. These features allow fabrication of a smaller and simpler test probe. 1 fig.

  14. City of Mount Dora, Florida (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovationin Urban TransportMartinsville,Minidoka,City of Mount Dora, Florida

  15. City of Mount Hope, Kansas (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovationin Urban TransportMartinsville,Minidoka,City of Mount Dora,

  16. Mount Nittany Elementary School Wind Turbine | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRose BendMiasole IncMinutemanVistaZephyr) JumpMorroMoultonMount Nittany

  17. Mount Wachusetts Community College Wind Project | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRose BendMiasole IncMinutemanVistaZephyr) JumpMorroMoultonMountCommunity

  18. Mount Airy, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,Wave Group JumpMount Airy,

  19. Mount Arlington, New Jersey: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,Wave Group JumpMount

  20. Mount Calm, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,Wave Group JumpMountCalm,

  1. System and method for reproducibly mounting an optical element

    DOE Patents [OSTI]

    Eisenbies, Stephen; Haney, Steven

    2005-05-31T23:59:59.000Z

    The present invention provides a two-piece apparatus for holding and aligning the MEMS deformable mirror. The two-piece apparatus comprises a holding plate for fixedly holding an adaptive optics element in an overall optical system and a base spatially fixed with respect to the optical system and adapted for mounting and containing the holding plate. The invention further relates to a means for configuring the holding plate through adjustments to each of a number of off-set pads touching each of three orthogonal plane surfaces on the base, wherein through the adjustments the orientation of the holding plate, and the adaptive optics element attached thereto, can be aligned with respect to the optical system with six degrees of freedom when aligning the plane surface of the optical element. The mounting system thus described also enables an operator to repeatedly remove and restore the adaptive element in the optical system without the need to realign the system once that element has been aligned.

  2. Regenerative braking device with rotationally mounted energy storage means

    DOE Patents [OSTI]

    Hoppie, Lyle O. (Birmingham, MI)

    1982-03-16T23:59:59.000Z

    A regenerative braking device for an automotive vehicle includes an energy storage assembly (12) having a plurality of rubber rollers (26, 28) mounted for rotation between an input shaft (30) and an output shaft (32), clutches (50, 56) and brakes (52, 58) associated with each shaft, and a continuously variable transmission (22) connectable to a vehicle drivetrain and to the input and output shafts by the respective clutches. In a second embodiment the clutches and brakes are dispensed with and the variable ratio transmission is connected directly across the input and output shafts. In both embodiments the rubber rollers are torsionally stressed to accumulate energy from the vehicle when the input shaft rotates faster or relative to the output shaft and are torsionally relaxed to deliver energy to the vehicle when the output shaft rotates faster or relative to the input shaft.

  3. Adapter plate assembly for adjustable mounting of objects

    DOE Patents [OSTI]

    Blackburn, R.S.

    1986-05-02T23:59:59.000Z

    An adapter plate and two locking discs are together affixed to an optic table with machine screws or bolts threaded into a fixed array of internally threaded holes provided in the table surface. The adapter plate preferably has two, and preferably parallel, elongated locating slots each freely receiving a portion of one of the locking discs for secure affixation of the adapter plate to the optic table. A plurality of threaded apertures provided in the adapter plate are available to attach optical mounts or other devices onto the adapter plate in an orientation not limited by the disposition of the array of threaded holes in the table surface. An axially aligned but radially offset hole through each locking disc receives a screw that tightens onto the table, such that prior to tightening of the screw the locking disc may rotate and translate within each locating slot of the adapter plate for maximum flexibility of the orientation thereof.

  4. Adapter plate assembly for adjustable mounting of objects

    DOE Patents [OSTI]

    Blackburn, Robert S. (Albuquerque, NM)

    1987-01-01T23:59:59.000Z

    An adapter plate and two locking discs are together affixed to an optic table with machine screws or bolts threaded into a fixed array of internally threaded holes provided in the table surface. The adapter plate preferably has two, and preferably parallel, elongated locating slots each freely receiving a portion of one of the locking discs for secure affixation of the adapter plate to the optic table. A plurality of threaded apertures provided in the adapter plate are available to attach optical mounts or other devices onto the adapter plate in an orientation not limited by the disposition of the array of threaded holes in the table surface. An axially aligned but radially offset hole through each locking disc receives a screw that tightens onto the table, such that prior to tightening of the screw the locking disc may rotate and translate within each locating slot of the adapter plate for maximum flexibility of the orientation thereof.

  5. Wind loading on tracking and field-mounted solar collectors

    SciTech Connect (OSTI)

    Murphy, L.M.

    1980-12-01T23:59:59.000Z

    Current design and testing procedures for wind loading are discussed. The test results corresponding to numerous wind tests on heliostats, parabolic troughs, parabolic dishes, and field mounted photovoltaic arrays are discussed and the applicability of the findings across the various technologies is assessed. One of the most significant consistencies in the data from all of the technologies is the apparent benefit provided by fences and field shielding. Taken in toto, these data show that load reductions of three, or possibly more, seem feasible, though a more thorough understanding of the phenomena involved must be attained before this benefit can be realized. It is recommended that the required understanding be developed to take advantage of this benefit and that field tests be conducted to correlate with both analyses and tests.

  6. Direct mounted photovoltaic device with improved adhesion and method thereof

    DOE Patents [OSTI]

    Boven, Michelle L; Keenihan, James R; Lickly, Stan; Brown, Jr., Claude; Cleereman, Robert J; Plum, Timothy C

    2014-12-23T23:59:59.000Z

    The present invention is premised upon a photovoltaic device suitable for directly mounting on a structure. The device includes an active portion including a photovoltaic cell assembly having a top surface portion that allows transmission of light energy to a photoactive portion of the photovoltaic device for conversion into electrical energy and a bottom surface having a bottom bonding zone; and an inactive portion immediately adjacent to and connected to the active portion, the inactive portion having a region for receiving a fastener to connect the device to the structure and having on a top surface, a top bonding zone; wherein one of the top and bottom bonding zones comprises a first bonding element and the other comprises a second bonding element, the second bonding element designed to interact with the first bonding element on a vertically overlapped adjacent photovoltaic device to bond the device to such adjacent device or to the structure.

  7. An investigation of the effects of luminaire mounting height on roadside sign placement and visibility

    E-Print Network [OSTI]

    Walton, Ned Ephram

    1966-01-01T23:59:59.000Z

    . ometer. . 21 V-1 Iso-footcand i. e Curve 30-foot Mounting Height. . . . . . . . . . . . . . . 28 Iso-footcandle Curve 40-foot Mount ing Height. . . . . . . . . . . . , . 29 V-3 Effects on Legibility Distance for C'ondit tons Shown... for Cond it rona Shown . 55 9-15 Sign Bright ress and Disabrlity Vetting Brightness for Horditior. s Shown. 56 V- 16 Sign Brigncness and Disability Veiling Brightness for 30- and 40- foot. Mounting Heights. . . . . . . . . . . . . . v-17 Sign...

  8. Methane Hydrate Dissociation by Depressurization in a Mount Elbert Sandstone Sample: Experimental Observations and Numerical Simulations

    E-Print Network [OSTI]

    Kneafsey, T.

    2012-01-01T23:59:59.000Z

    had been mounted to a PVC endpiece having a thermocouplethe center. The opposing PVC endpiece with a thermocoupleglycol/water through the PVC jacket surrounding the aluminum

  9. E-Print Network 3.0 - automated surface mount Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    automated, including parking garages. Less effort, fewer collisions... What's to lose? Vehicle... distance sensors One mounted in the front to detect obstacles to forward...

  10. Ventilation efficiencies of a desk-edge-mounted task ventilation system

    E-Print Network [OSTI]

    Faulkner, David; Fisk, William J.; Sullivan, Douglas P.; Lee, Seung Min

    2002-01-01T23:59:59.000Z

    DESK-EDGE-MOUNTED TASK VENTILATION SYSTEM D Faulkner * , WJthe effectiveness of a task ventilation system with an airthe desk. The task ventilation system provided outside air,

  11. Pattern Of Shallow Ground Water Flow At Mount Princeton Hot Springs...

    Open Energy Info (EERE)

    Methods Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Pattern Of Shallow Ground Water Flow At Mount Princeton Hot Springs,...

  12. Pattern of shallow ground water flow at Mount Princeton Hot Springs...

    Open Energy Info (EERE)

    methods Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Pattern of shallow ground water flow at Mount Princeton Hot Springs,...

  13. Environmental impacts of large-scale grid-connected ground-mounted PV installations

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Environmental impacts of large-scale grid-connected ground-mounted PV installations Antoine Beylota-scale ground-mounted PV installations by considering a life-cycle approach. The methodology is based. Mobile PV installations with dual-axis trackers show the largest impact potential on ecosystem quality

  14. Design and development of an automated pinning machine for the surface mount electronics industry

    E-Print Network [OSTI]

    Cook, Daniel J., M. Eng. (Daniel James). Massachusetts Institute of Technology

    2012-01-01T23:59:59.000Z

    This thesis describes the development of a concept for a pinning process and the associated machinery to handle odd-form pins specific to a company in the surface mount electronics industry. The developed pinning machine ...

  15. Surface mounted PCB cleaning process improvement and Its impact on manufacturing system performance

    E-Print Network [OSTI]

    Rajendran, Nikith

    2011-01-01T23:59:59.000Z

    In the surface mount technology (SMT) assembly line, the printed circuit boards (PCB) are washed to remove the solder flux that was used while soldering to prevent oxidation. However the current cleaning method is highly ...

  16. An Experimental Evaluation of Duct-Mounted Relative Humidity Sensors: Part 2 – Accuracy Results 

    E-Print Network [OSTI]

    Joshi, S.N.; Pate, M.B.; Nelson, R.M; House, J.H.; Klaasen, C.J.

    2005-01-01T23:59:59.000Z

    Reproduced with permission of the copyright owner. Further reproduction prohibited without permission. An Experimental Evaluation of Duct-Mounted Relative Humidity Sensors: Part 2-Accuracy Results Joshi, Shailesh N;House, John M;Pate, Michael B...

  17. An Experimental Evaluation of Duct-Mounted Relative Humidity Sensors: Part 1 – Test and Evaluation Procedures 

    E-Print Network [OSTI]

    Joshi, S.N.; Pate, M.B.; Nelson, R.M.; House, R.H.; Klaasen, C.J.

    2005-01-01T23:59:59.000Z

    Reproduced with permission of the copyright owner. Further reproduction prohibited without permission. An Experimental Evaluation of Duct-Mounted Relative Humidity Sensors: Part 1, Test and Evaluation... Joshi, Shailesh N;Pate, Michael B...

  18. Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Unlimited Release Printed February 2013 Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project Scoping and Feasibility Joseph W. Pratt and Aaron P. Harris Prepared by...

  19. Near-Surface imaging of a hydrogeothermal system at Mount Princeton...

    Open Energy Info (EERE)

    imaging of a hydrogeothermal system at Mount Princeton, Colorado using 3D seismic, self-potential, and dc resistivity data Jump to: navigation, search OpenEI Reference LibraryAdd...

  20. Cleaning process development and optimization in the surface mount assembly line of power modules

    E-Print Network [OSTI]

    Mukherjee, Ishan

    2011-01-01T23:59:59.000Z

    The cleaning process in the surface mount assembly line of power modules had been found to insufficiently remove solder flux residue from printed circuit board (PCB) assemblies after the process of reflow soldering. This ...

  1. An Updated Procedure for Tare and Interference Wind Tunnel Testing of Strut-Mounted Models

    E-Print Network [OSTI]

    Kutz, Douglas M

    2014-05-02T23:59:59.000Z

    to the presence of wind tunnel walls. The standard correction procedure adjusts for the presence of these boundaries using approximations based on linear potential flow theory. Separately,tare and interference removal involves the linear subtraction of mounting...

  2. Integrated crystal mounting and alignment system for high-throughput biological crystallography

    DOE Patents [OSTI]

    Nordmeyer, Robert A. (San Leandro, CA); Snell, Gyorgy P. (Richmond, CA); Cornell, Earl W. (Antioch, CA); Kolbe, William F. (Moraga, CA); Yegian, Derek T. (Oakland, CA); Earnest, Thomas N. (Berkeley, CA); Jaklevich, Joseph M. (Lafayette, CA); Cork, Carl W. (Walnut Creek, CA); Santarsiero, Bernard D. (Chicago, IL); Stevens, Raymond C. (La Jolla, CA)

    2007-09-25T23:59:59.000Z

    A method and apparatus for the transportation, remote and unattended mounting, and visual alignment and monitoring of protein crystals for synchrotron generated x-ray diffraction analysis. The protein samples are maintained at liquid nitrogen temperatures at all times: during shipment, before mounting, mounting, alignment, data acquisition and following removal. The samples must additionally be stably aligned to within a few microns at a point in space. The ability to accurately perform these tasks remotely and automatically leads to a significant increase in sample throughput and reliability for high-volume protein characterization efforts. Since the protein samples are placed in a shipping-compatible layered stack of sample cassettes each holding many samples, a large number of samples can be shipped in a single cryogenic shipping container.

  3. Integrated crystal mounting and alignment system for high-throughput biological crystallography

    DOE Patents [OSTI]

    Nordmeyer, Robert A.; Snell, Gyorgy P.; Cornell, Earl W.; Kolbe, William; Yegian, Derek; Earnest, Thomas N.; Jaklevic, Joseph M.; Cork, Carl W.; Santarsiero, Bernard D.; Stevens, Raymond C.

    2005-07-19T23:59:59.000Z

    A method and apparatus for the transportation, remote and unattended mounting, and visual alignment and monitoring of protein crystals for synchrotron generated x-ray diffraction analysis. The protein samples are maintained at liquid nitrogen temperatures at all times: during shipment, before mounting, mounting, alignment, data acquisition and following removal. The samples must additionally be stably aligned to within a few microns at a point in space. The ability to accurately perform these tasks remotely and automatically leads to a significant increase in sample throughput and reliability for high-volume protein characterization efforts. Since the protein samples are placed in a shipping-compatible layered stack of sample cassettes each holding many samples, a large number of samples can be shipped in a single cryogenic shipping container.

  4. Test plan/procedure for the shock limiting device of the radioisotope thermoelectric generator package mounting subsystem 145. Revision 1

    SciTech Connect (OSTI)

    Satoh, J.A.

    1995-05-25T23:59:59.000Z

    This document defines the procedure to be used in the 18 inch drop test to be used for design verification of the RTG Transportation System Package Mounting.

  5. Method of making cascaded die mountings with springs-loaded contact-bond options

    DOE Patents [OSTI]

    Hsu, John S. (Oak Ridge, TN); Adams, Donald J. (Knoxville, TN); Su, Gui-Jia (Knoxville, TN); Marlino, Laura D. (Oak Ridge, TN); Ayers, Curtis W. (Kingston, TN); Coomer, Chester (Knoxville, TN)

    2007-06-19T23:59:59.000Z

    A cascaded die mounting device and method using spring contacts for die attachment, with or without metallic bonds between the contacts and the dies, is disclosed. One embodiment is for the direct refrigerant cooling of an inverter/converter carrying higher power levels than most of the low power circuits previously taught, and does not require using a heat sink.

  6. Cascaded die mountings with spring-loaded contact-bond options

    DOE Patents [OSTI]

    Hsu, John S.; Adams, Donald J.; Su, Gui-Jia; Marlino, Laura D.; Ayers, Curtis W.; Coomer, Chester

    2005-08-16T23:59:59.000Z

    A cascaded die mounting device and method using spring contacts for die attachment, with or without metallic bonds between the contacts and the dies, is disclosed. One embodiment is for the direct refrigerant cooling of an inverter/converter carrying higher power levels than most of the low power circuits previously taught, and does not require using a heat sink.

  7. Apparatus and method for mounting photovoltaic power generating systems on buildings

    DOE Patents [OSTI]

    Russell, Miles Clayton (Lincoln, MA)

    2008-10-14T23:59:59.000Z

    Rectangular PV modules (6) are mounted on a building roof (4) by mounting stands that are distributed in rows and columns. Each stand comprises a base plate (10) that rests on the building roof (4) and first and second brackets (12, 14) of different height attached to opposite ends of the base plate (10). Each bracket (12, 14) has dual members for supporting two different PV modules (6), and each PV module (6) has a mounting pin (84) adjacent to each of its four corners. Each module (6) is supported by attachment of two of its mounting pins (84) to different first brackets (12), whereby the modules (6) and their supporting stands are able to resist uplift forces resulting from high velocity winds without the base plates (10) being physically attached to the supporting roof structure (4). Preferably the second brackets (14) have a telescoping construction that permits their effective height to vary from less than to substantially the same as that of the first brackets (12).

  8. WestSolarGroundMount City of Phoenix/ASU West

    E-Print Network [OSTI]

    Fletcher WestSolarGroundMount Lawn Field City of Phoenix/ASU West South Fields Community Park Parking Lot 12 North Zone #12; 2E · Credit Union · Parking & Transit Services · Devils Den · Jamba Juice · P.O.D. Market

  9. Four pin mounting system for nuclear reactor control rod guide tubes

    SciTech Connect (OSTI)

    Balog, L.J.; Boyle, D.E.

    1990-06-26T23:59:59.000Z

    This paper describes a nuclear reactor having a control rod guide tube and an upper core plate, a pin-type mounting system for removably mounting the lower flange of a control rod guide tube over an opening in the upper core plate. It comprises: a pair of resilient pin members formed of stainless steel, mounted in passages formed through first opposing sides of the guide tube lower flange and resiliently and slidably receivable in a first pair of opposing bores formed on first opposing sides of the opening in the upper core plate to permit deflection thereof when the guide tube is subject to the usual shear loads associated with the operation of the nuclear reactor, the resilient pin members bearing substantially all of the usual shear load to which the guide tube is subjected. A paid of reinforcing pin members formed to stainless steel mounted on second opposing sides of the guide tube lower flange and slidably receivable in a second pair of bores formed on second opposing sides of the opening in the upper core plate.

  10. Cylindrical Pellet Pose Estimation in Clutter using a Single Robot Mounted Camera

    E-Print Network [OSTI]

    Roy, Sumantra Dutta

    Cylindrical Pellet Pose Estimation in Clutter using a Single Robot Mounted Camera Punit Tiwan estimation of cylindrical pellet using a single camera-in-hand configuration of a robot is discussed in this paper. Approaches to estimate pose in both isolated and an occluded environment is discussed. The pellet

  11. ORNITHOCOPROPHILOUS PLANTS OF MOUNT DESERT ROCK, A REMOTE BIRD-NESTING ISLAND IN THE

    E-Print Network [OSTI]

    Rajakaruna, Nishanta

    ORNITHOCOPROPHILOUS PLANTS OF MOUNT DESERT ROCK, A REMOTE BIRD-NESTING ISLAND IN THE GULF OF MAINE for the maintenance of plant communities (Cruden 1966; Gillham 1970; Howe and Smallwood 1982; Mulder and Keall 2001 to botanists as they often determine which plant species are dispersed and become established in such remote

  12. Oscillatory Control and the Effects of Actuation Frequency on a Wall-Mounted Hump

    E-Print Network [OSTI]

    Dabiri, John O.

    . The deflected flap experiments of Nishri and Wygnanski6 determined that the boundary layer reattached to the natural shedding frequency of the separated shear layer. The addition of oscillatory control regularizesOscillatory Control and the Effects of Actuation Frequency on a Wall-Mounted Hump Jennifer A

  13. New Loops! MiTeGen* 50MicroMountsTM consist of a thin microfabricated

    E-Print Network [OSTI]

    Meagher, Mary

    New Loops! MiTeGen* 50µMicroMountsTM consist of a thin microfabricated polyimide film attached to a solid non-magnetic stainless steel pin. The film is polyimide, which is used in Kapton® tape and is employed for X- ray transparent windows on X-ray beam lines. The film is curved by wrapping polyimide film

  14. DOE Partnership Completes Successful CO2 Injection Test in the Mount Simon Sandstone

    Broader source: Energy.gov [DOE]

    The Midwest Regional Carbon Sequestration Partnership, one of seven partnerships in the U.S. Department of Energy's Regional Carbon Sequestration Partnerships program, has successfully injected 1,000 metric tons of carbon dioxide (CO2) into the Mount Simon Sandstone, a deep saline formation that is widespread across much of the Midwest.

  15. Arctic Oscillation response to the 1991 Mount Pinatubo eruption: Effects of volcanic aerosols and ozone depletion

    E-Print Network [OSTI]

    Robock, Alan

    of perturbation experiments, the full radiative effects of the observed Pinatubo aerosol cloud were included eruption, which produced the largest global volcanic aerosol cloud in the twentieth century. A seriesArctic Oscillation response to the 1991 Mount Pinatubo eruption: Effects of volcanic aerosols

  16. Pleasant Bayou Operations Brazoria County, Texas

    SciTech Connect (OSTI)

    Eaton, B.A.; Featherston, C.R.; Meahl, T.E.

    1989-03-21T23:59:59.000Z

    This project will demonstrate the Hybrid Cycle Concept for electricity generation using geopressured-geothermal resources. The test is scheduled to be a minimum of one year, which may be extended. The majority of the equipment came from the DOE facility at East Mesa, CA. The hybrid cycle has been designed for 10,800 BPD brine and 220,000 SCFD of gas. The power output will be about one megawatt, which will be sold to Houston Lighting and Power Company. An important research objective is to determine the size and ultimate production capability of the geopressured-geothermal reservoir. The long-term deliverability of these type reservoirs is a significant factor in determining the ultimate economic capability of these systems.

  17. Mirror mounts designed for the Advanced Photon Source SRI-CAT

    SciTech Connect (OSTI)

    Shu, D.; Benson, C.; Chang, J. [and others

    1997-09-01T23:59:59.000Z

    Use of a mirror for beamlines at third-generation synchrotron radiation facilities, such as the Advanced Photon Source (APS) at Argonne National laboratory, has many advantages. A mirror as a first optical component provides significant reduction in the beam peak heat flux and total power on the downstream monochromator and simplifies the bremsstrahlung shielding design for the beamline transport. It also allows one to have a system for multibeamline branching and switching. More generally, a mirror is used for beam focusing and/or low-pass filtering. Six different mirror mounts have been designed for the SRI-CAT beamlines. Four of them are designed as water-cooled mirrors for white or pink beam use, and the other two are for monochromatic beam use. Mirror mount designs, including vacuum vessel structure and precision supporting stages, are presented in this paper.

  18. Development of a hybrid microcircuit test vehicle for surface mount applications

    SciTech Connect (OSTI)

    Hernandez, C.L.; Hosking, F.M.; Vianco, P.T.

    1997-08-01T23:59:59.000Z

    The technology drivers of the electronics industry continue to be systems miniaturization and reliability, in addition to addressing a variety of important environmental concerns. Surface mount technology (SMT) has evolved in response to these issues. Prototype hybrid test vehicles have been developed at Sandia National Laboratories to evaluate three lead-free solders for Au-Pt-Pd thick film soldering. The alloys are based on the Sn-Ag, Sn-Ag-Bi and Sn-Ag-Bi-Au systems. Populated test vehicles with surface mount devices were designed and fabricated to evaluate actual solder joints. Pastes were screen printed on the test substrates and reflowed with the components in place. The test components consist of a variety of dummy chip capacitors and leadless ceramic chip carriers (LCC`s). The development of the reflow profiles will be discussed. Comprehensive defect analysis will also be presented.

  19. Technique for mounting SiC fibers for cross-sectional microscopic examination

    SciTech Connect (OSTI)

    Ptasienski, J.J. (Alcoa Technical Center, Alcoa Center, PA (United States))

    1994-07-01T23:59:59.000Z

    Silicon carbide (SiC) fibers are commonly used in many composite and other material applications. It is often of interest to examine cross sections of such fibers microscopically, prior to composite manufacturing processes, to ensure diameter consistency. However, SiC fibers are difficult materials to metallographically mount and polish, because the fibers are harder than most epoxy mounting materials. The difference in hardness between the SiC and the mounting epoxy usually causes rounding of the fibers during final polishing. It is also difficult to position a large group of fibers for cross-sectioning, because a group of closely spaced fibers will have poor bonding to the epoxy. The following technique was developed to improve the preparation of cross-sectional samples of SiC fibers. In this study, fibers of SiC plated with electroless nickel were used to demonstrate the technique. The following outline describes the steps that were taken in preparing a cross-sectional specimen of the plated fibers.

  20. Base excitation testing system using spring elements to pivotally mount wind turbine blades

    DOE Patents [OSTI]

    Cotrell, Jason; Hughes, Scott; Butterfield, Sandy; Lambert, Scott

    2013-12-10T23:59:59.000Z

    A system (1100) for fatigue testing wind turbine blades (1102) through forced or resonant excitation of the base (1104) of a blade (1102). The system (1100) includes a test stand (1112) and a restoring spring assembly (1120) mounted on the test stand (1112). The restoring spring assembly (1120) includes a primary spring element (1124) that extends outward from the test stand (1112) to a blade mounting plate (1130) configured to receive a base (1104) of blade (1102). During fatigue testing, a supported base (1104) of a blad (1102) may be pivotally mounted to the test stand (1112) via the restoring spring assembly (1120). The system (1100) may include an excitation input assembly (1140) that is interconnected with the blade mouting plate (1130) to selectively apply flapwise, edgewise, and/or pitch excitation forces. The restoring spring assemply (1120) may include at least one tuning spring member (1127) positioned adjacent to the primary spring element (1124) used to tune the spring constant or stiffness of the primary spring element (1124) in one of the excitation directions.

  1. The Mount Perkins block, northwestern Arizona: An exposed cross section of an evolving, preextensional to synextensional magmatic system

    E-Print Network [OSTI]

    Faulds, James E.; Feuerbach, Daniel L.; Reagan, Mark K.; Metcalf, Rodney V.; Gans, Phil; Walker, J. Douglas

    1995-08-10T23:59:59.000Z

    The steeply tilted Mount Perkins block, northwestern Arizona, exposes a cross section of a magmatic system that evolved through the onset of regional extension. New 40Ar/39Ar ages of variably tilted (0–90°) volcanic strata ...

  2. Evidence of a Threshold Wind Speed in Tower-mounted Scatterometer Data David W. Draper and David G. Long

    E-Print Network [OSTI]

    Long, David G.

    . Evidence of the threshold wind speed and a hysteresis effect have been observed in airship and wave tank in airship data [2]. YSCAT, an ultra-wideband (2-14 GHz) tower-mounted scat- terometer, provides significant

  3. An Experimental Evaluation of Duct-Mounted Relative Humidity Sensors: Part 3 – Repeatability, Hysteresis and Linearity Results 

    E-Print Network [OSTI]

    Joshi, S.N.; Pate, M.B.; Nelson, R.M.; House, J.H.; Klaassen, C.J.

    2005-01-01T23:59:59.000Z

    Reproduced with permission of the copyright owner. Further reproduction prohibited without permission. An Experimental Evaluation of Duct-Mounted Relative Humidity Sensors: Part 3-Repeatability, Hyste... Joshi, Shailesh N;House, John M...

  4. The Mount Manengouba, a complex volcano of the Cameroon Line:1 Volcanic history, petrological and geochemical features2

    E-Print Network [OSTI]

    Boyer, Edmond

    1 The Mount Manengouba, a complex volcano of the Cameroon Line:1 Volcanic history, petrological Group 2). Both magmatic groups belong to the under-saturated alkaline40 sodic series. Petrological

  5. Self-Packaging and Self-Mounting of Miniaturized Semiconductor Dies Across Length Scales and 3D Topologies

    E-Print Network [OSTI]

    Jacobs, Heiko O.

    , parallel packaging and encapsulation, and the programmable self-mounting of various types of components of single crystal Si forming curved and 3D solar cells on plastic substrates. INTRODUCTION The construction

  6. Effects of experimental fascioliasis on puberty and comparison of mounting activity by radiotelemetry in pubertal and gestating beef heifers

    E-Print Network [OSTI]

    Paczkowski, Melissa Jeanne

    2005-11-01T23:59:59.000Z

    EFFECTS OF EXPERIMENTAL FASCIOLIASIS ON PUBERTY AND COMPARISON OF MOUNTING ACTIVITY BY RADIOTELEMETRY IN PUBERTAL AND GESTATING BEEF HEIFERS A Thesis by MELISSA JEANNE PACZKOWSKI Submitted to the Office of Graduate Studies... OF MOUNTING ACTIVITY BY RADIOTELEMETRY IN PUBERTAL AND GESTATING BEEF HEIFERS A Thesis by MELISSA JEANNE PACZKOWSKI Submitted to Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Approved...

  7. Work plan for the fabrication of the radioisotope thermoelectric generator transportation system package mounting

    SciTech Connect (OSTI)

    Satoh, J.A.

    1994-11-09T23:59:59.000Z

    The Radioisotope Thermoelectric Generator (RTG) has available a dedicated system for the transportation of RTG payloads. The RTG Transportation System (System 100) is comprised of four systems; the Package (System 120), the Semi-trailer (System 140), the Gas Management (System 160), and the Facility Transport (System 180). This document provides guidelines on the fabrication, technical requirements, and quality assurance of the Package Mounting (Subsystem 145), part of System 140. The description follows the Development Control Requirements of WHC-CM-6-1, EP 2.4, Rev. 3.

  8. Eddy current probe with foil sensor mounted on flexible probe tip and method of use

    SciTech Connect (OSTI)

    Viertl, John R. M. (Niskayuna, NY); Lee, Martin K. (Niskayuna, NY)

    2001-01-01T23:59:59.000Z

    A pair of copper coils are embedded in the foil strip. A first coil of the pair generates an electromagnetic field that induces eddy currents on the surface, and the second coil carries a current influenced by the eddy currents on the surface. The currents in the second coil are analyzed to obtain information on the surface eddy currents. An eddy current probe has a metal housing having a tip that is covered by a flexible conductive foil strip. The foil strip is mounted on a deformable nose at the probe tip so that the strip and coils will conform to the surface to which they are applied.

  9. Passive pavement-mounted acoustical linguistic drive alert system and method

    DOE Patents [OSTI]

    Kisner, Roger A. (Knoxville, TN); Anderson, Richard L. (Oak Ridge, TN); Carnal, Charles L. (Cookeville, TN); Hylton, James O. (Clinton, TN); Stevens, Samuel S. (Harriman, TN)

    2001-01-01T23:59:59.000Z

    Systems and methods are described for passive pavement-mounted acoustical alert of the occupants of a vehicle. A method of notifying a vehicle occupant includes providing a driving medium upon which a vehicle is to be driven; and texturing a portion of the driving medium such that the textured portion interacts with the vehicle to produce audible signals, the textured portion pattern such that a linguistic message is encoded into the audible signals. The systems and methods provide advantages because information can be conveyed to the occupants of the vehicle based on the location of the vehicle relative to the textured surface.

  10. Application analysis of Monte Carlo to estimate the capacity of geothermal resources in Lawu Mount

    SciTech Connect (OSTI)

    Supriyadi, E-mail: supriyadi-uno@yahoo.co.nz [Physics, Faculty of Mathematics and Natural Sciences, University of Jember, Jl. Kalimantan Kampus Bumi Tegal Boto, Jember 68181 (Indonesia); Srigutomo, Wahyu [Complex system and earth physics, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung, Jl. Ganesha 10, Bandung 40132 (Indonesia); Munandar, Arif [Kelompok Program Penelitian Panas Bumi, PSDG, Badan Geologi, Kementrian ESDM, Jl. Soekarno Hatta No. 444 Bandung 40254 (Indonesia)

    2014-03-24T23:59:59.000Z

    Monte Carlo analysis has been applied in calculation of geothermal resource capacity based on volumetric method issued by Standar Nasional Indonesia (SNI). A deterministic formula is converted into a stochastic formula to take into account the nature of uncertainties in input parameters. The method yields a range of potential power probability stored beneath Lawu Mount geothermal area. For 10,000 iterations, the capacity of geothermal resources is in the range of 139.30-218.24 MWe with the most likely value is 177.77 MWe. The risk of resource capacity above 196.19 MWe is less than 10%. The power density of the prospect area covering 17 km{sup 2} is 9.41 MWe/km{sup 2} with probability 80%.

  11. Methane Hydrate Dissociation by Depressurization in a Mount Elbert Sandstone Sample: Experimental Observations and Numerical Simulations

    SciTech Connect (OSTI)

    Kneafsey, T.; Moridis, G.J.

    2011-01-15T23:59:59.000Z

    A preserved sample of hydrate-bearing sandstone from the Mount Elbert Test Well was dissociated by depressurization while monitoring the internal temperature of the sample in two locations and the density changes at high spatial resolution using x-ray CT scanning. The sample contained two distinct regions having different porosity and grain size distributions. The hydrate dissociation occurred initially throughout the sample as a result of depressing the pressure below the stability pressure. This initial stage reduced the temperature to the equilibrium point, which was maintained above the ice point. After that, dissociation occurred from the outside in as a result of heat transfer from the controlled temperature bath surrounding the pressure vessel. Numerical modeling of the test using TOUGH+HYDRATE yielded a gas production curve that closely matches the experimentally measured curve.

  12. Geological interpretation of Mount Ciremai geothermal system from remote sensing and magneto-teluric analysis

    E-Print Network [OSTI]

    Sumintadireja, Prihadi; Irawan, Dasapta E; Irawan, Diky; Fadillah, Ahmad

    2015-01-01T23:59:59.000Z

    The exploration of geothermal system at Mount Ciremai has been started since the early 1980s and has just been studied carefully since the early 2000s. Previous studies have detected the potential of geothermal system and also the groundwater mechanism feeding the system. This paper will discuss the geothermal exploration based on regional scale surface temperature analysis with Landsat image to have a more detail interpretation of the geological setting and magneto-telluric or MT survey at prospect zones, which identified by the previous method, to have a more exact and in depth local scale structural interpretation. Both methods are directed to pin point appropriate locations for geothermal pilot hole drilling and testing. We used four scenes of Landsat Enhanced Thematic Mapper or ETM+ data to estimate the surface manifestation of a geothermal system. Temporal analysis of Land Surface Temperature or LST was applied and coupled with field temperature measurement at seven locations. By combining the TTM with ...

  13. Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project Scoping and Feasibility.

    SciTech Connect (OSTI)

    Pratt, Joseph William; Harris, Aaron P

    2013-01-01T23:59:59.000Z

    A barge-mounted hydrogen-fueled proton exchange membrane (PEM) fuel cell system has the potential to reduce emissions and fossil fuel use of maritime vessels in and around ports. This study determines the technical feasibility of this concept and examines specific options on the U.S. West Coast for deployment practicality and potential for commercialization.The conceptual design of the system is found to be straightforward and technically feasible in several configurations corresponding to various power levels and run times.The most technically viable and commercially attractive deployment options were found to be powering container ships at berth at the Port of Tacoma and/or Seattle, powering tugs at anchorage near the Port of Oakland, and powering refrigerated containers on-board Hawaiian inter-island transport barges. Other attractive demonstration options were found at the Port of Seattle, the Suisun Bay Reserve Fleet, the California Maritime Academy, and an excursion vessel on the Ohio River.

  14. Numerical evaluation of the thermal performances of roof-mounted radiant barriers

    E-Print Network [OSTI]

    Miranville, Frédéric; Lucas, Franck; Johan, Seriacaroupin

    2014-01-01T23:59:59.000Z

    This paper deals with the thermal performances of roof-mounted radiant barriers. Using dynamic simulations of a mathematical model of a whole test cell including a radiant barrier installed between the roof top and the ceiling, the thermal performance of the roof is calculated. The mean method is more particularly used to assess the thermal resistance of the building component and lead to a value which is compared to the one obtained for a mass insulation product such as polyurethane foam. On a further stage, the thermal mathematical model is replaced by a thermo-aeraulic model which is used to evaluate the thermal resistance of the roof as a function of the airflow rate. The results shows a better performance of the roof in this new configuration, which is widely used in practice. Finally, the mathematical relation between the thermal resistance and the airflow rate is proposed.

  15. Pyrometer mount for a closed-circuit thermal medium cooled gas turbine

    DOE Patents [OSTI]

    Jones, Raymond Joseph (Duanesburg, NY); Kirkpatrick, Francis Lawrence (late of Galway, NY); Burns, James Lee (Schenectady, NY); Fulton, John Robert (Clifton Park, NY)

    2002-01-01T23:59:59.000Z

    A steam-cooled second-stage nozzle segment has an outer band and an outer cover defining a plenum therebetween for receiving cooling steam for flow through the nozzles to the inner band and cover therefor and return flow through the nozzles. To measure the temperature of the buckets of the stage forwardly of the nozzle stage, a pyrometer boss is electron beam-welded in an opening through the outer band and TIG-welded to the outer cover plate. By machining a hole through the boss and seating a linearly extending tube in the boss, a line of sight between a pyrometer mounted on the turbine frame and the buckets is provided whereby the temperature of the buckets can be ascertained. The welding of the boss to the outer band and outer cover enables steam flow through the plenum without leakage, while providing a line of sight through the outer cover and outer band to measure bucket temperature.

  16. A retrospective tiered environmental assessment of the Mount Storm Wind Energy Facility, West Virginia,USA

    SciTech Connect (OSTI)

    Efroymson, Rebecca Ann [ORNL; Day, Robin [No Affiliation; Strickland, M. Dale [Western EcoSystems Technology

    2012-11-01T23:59:59.000Z

    Bird and bat fatalities from wind energy projects are an environmental and public concern, with post-construction fatalities sometimes differing from predictions. Siting facilities in this context can be a challenge. In March 2012 the U.S. Fish and Wildlife Service (USFWS) released Land-based Wind Energy Guidelines to assess collision fatalities and other potential impacts to species of concern and their habitats to aid in siting and management. The Guidelines recommend a tiered approach for assessing risk to wildlife, including a preliminary site evaluation that may evaluate alternative sites, a site characterization, field studies to document wildlife and habitat and to predict project impacts, post construction studies to estimate impacts, and other post construction studies. We applied the tiered assessment framework to a case study site, the Mount Storm Wind Energy Facility in Grant County, West Virginia, USA, to demonstrate the use of the USFWS assessment approach, to indicate how the use of a tiered assessment framework might have altered outputs of wildlife assessments previously undertaken for the case study site, and to assess benefits of a tiered ecological assessment framework for siting wind energy facilities. The conclusions of this tiered assessment for birds are similar to those of previous environmental assessments for Mount Storm. This assessment found risk to individual migratory tree-roosting bats that was not emphasized in previous preconstruction assessments. Differences compared to previous environmental assessments are more related to knowledge accrued in the past 10 years rather than to the tiered structure of the Guidelines. Benefits of the tiered assessment framework include good communication among stakeholders, clear decision points, a standard assessment trajectory, narrowing the list of species of concern, improving study protocols, promoting consideration of population-level effects, promoting adaptive management through post-construction assessment and mitigation, and sharing information that can be used in other assessments.

  17. Examination of core samples from the Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope: Effects of retrieval and preservation

    E-Print Network [OSTI]

    Collett, T.J. Kneafsey, T.J., H. Liu, W. Winters, R. Boswell, R. Hunter, and T.S.

    2012-01-01T23:59:59.000Z

    and handling of natural gas hydrate. GSC Bulletin, 544: 263-naturally occurring gas hydrates: the structures of methanefrom the Mount Elbert Gas Hydrate Stratigraphic Test Well,

  18. Analysis of core samples from the BPXA-DOE-USGS Mount Elbert gas hydrate stratigraphic test well: Insights into core disturbance and handling

    E-Print Network [OSTI]

    Kneafsey, Timothy J.

    2010-01-01T23:59:59.000Z

    and handling of natural gas hydrate. GSC Bulletin, 544: 263-naturally occurring gas hydrates: the structures of methaneDOE-USGS Mount Elbert gas hydrate stratigraphic test well:

  19. SEQUENCE STRATIGRAPHY AND FACIES ANALYSIS OF THE ROLLINS SANDSTONE MEMBER (MOUNT GARFIELD FORMATION) AND RE-EXAMINATION OF THE CONTACT BETWEEN THE MOUNT GARFIELD AND WILLIAMS FORK FORMATIONS (LATE CRETACEOUS)

    E-Print Network [OSTI]

    Thompson, Jesse David

    2011-08-31T23:59:59.000Z

    there is no upward-climbing geometry at the top of the Mount Garfield Formation, and the Rollins Sandstone Member and the Cameo Wheeler coal zone (of the Williams Fork Formation) are not time-equivalent units. The marine- shoreface deposits within the Rollins...

  20. The CR 2.0mm (.079") insulation displacement connector features a mounting height as low as

    E-Print Network [OSTI]

    Wedeward, Kevin

    7 The CR 2.0mm (.079") insulation displacement connector features a mounting height as low as 6.9mm") pitch insulation displacement connector allows automatic harness production for connection of UL1007 of misinsertion without being permanently distorted. · Twin U-slot insulation displacement section The insulation

  1. Standard Operating Procedure (SOP) All stock must be properly secured in the lathe chuck or mounted prior to the machining

    E-Print Network [OSTI]

    Veiga, Pedro Manuel Barbosa

    or mounted prior to the machining process taking place. Use the correct sized clamp or vise for the stockStandard Operating Procedure (SOP) ­ Lathe · All stock must be properly secured in the lathe chuck the spindle work has the cup center imbedded; tail, stock and tool rests are securely clamped

  2. Maximization of No-Load Flux Density in Surface Mounted Permanent Magnet Motors Frdric DUBAS, Christophe ESPANET & Abdellatif MIRAOUI.

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Maximization of No-Load Flux Density in Surface Mounted Permanent Magnet Motors Frédéric DUBAS, Christophe ESPANET & Abdellatif MIRAOUI. Research Laboratory in Electronics, Electrical engineering expression of the optimal thickness of the magnet which make it possible to maximize the no-load flux density

  3. 1. Detect ground faults in PV arrays mounted on the roofs of 2. Interrupt the fault current

    E-Print Network [OSTI]

    Johnson, Eric E.

    1. Detect ground faults in PV arrays mounted on the roofs of dwellings 2. Interrupt the fault current 3. Indicate that a ground fault had occurred 4. Disconnect the faulted part of the PV array 5. "Crowbar" (short-circuit) the PV array The original GFPD prototype was developed in two versions that were

  4. Modeling of an eye-imaging system for optimizing illumination schemes in an eye-tracked head-mounted

    E-Print Network [OSTI]

    Hua, Hong

    Modeling of an eye-imaging system for optimizing illumination schemes in an eye-tracked head While the augmentation of head-mounted displays (HMDs) with eye-tracking (ET) capabilities adds of illumination schemes in an ET-HMD system, we present a simulated eye illumination and imaging system, which

  5. Helium isotopes in historical lavas from Mount Vesuvius Comment on `Noble gas isotopic ratios from historical lavas

    E-Print Network [OSTI]

    Graham, David W.

    Discussion Helium isotopes in historical lavas from Mount Vesuvius Comment on `Noble gas isotopic. Introduction Helium isotope results recently published by Tedesco et al. [1] appear to show a decrease in 3 He. Results Helium isotope results from our laboratory are reported in Table 1. The 3 He/4 He ratio has been

  6. Development of the recess mounting with monolithic metallization optoelectronic integrated circuit technology for optical clock distribution applications

    E-Print Network [OSTI]

    Atmaca, Eralp, 1976-

    2007-01-01T23:59:59.000Z

    Recess mounting with monolithic metallization, or RM3 integration, is used to integrate Ino.47Ga0.53As/InP based lattice-matched high quantum efficiency p-i-n photodetectors on silicon chips to build high performance ...

  7. EXPERIMENTAL TESTS OF COMPETITIVE MARKETS FOR ELECTRIC POWER Simon Ede, Timothy Mount, William Schulze, Robert Thomas, Ray Zimmerman

    E-Print Network [OSTI]

    CSMAE06 EXPERIMENTAL TESTS OF COMPETITIVE MARKETS FOR ELECTRIC POWER Simon Ede, Timothy Mount@cornell.edu, rjt1@cornell.edu, rz10@cornell.edu Abstract Testing the performance of electricity markets have been shown to be efficient. There is evidence from operating electricity markets that prices can

  8. Talk to the Virtual Hands: Self-Animated Avatars Improve Communication in Head-Mounted Display Virtual

    E-Print Network [OSTI]

    Talk to the Virtual Hands: Self-Animated Avatars Improve Communication in Head-Mounted Display Virtual Environments Trevor J. Dodds1 *, Betty J. Mohler1 , Heinrich H. Bu¨ lthoff1,2 1 Human Perception¨lthoff HH (2011) Talk to the Virtual Hands: Self-Animated Avatars Improve Communication in Head

  9. Fractional-Slot Surface Mounted PM Motors with Concentrated Windings for HEV Traction Drives

    SciTech Connect (OSTI)

    Bailey, J.M.

    2005-10-24T23:59:59.000Z

    High-power density and efficiency resulting from elimination of rotor windings and reduced magnetic-flux losses have made the rare earth permanent magnet (PM) motor a leading candidate for the Department of Energy's Office of FreedomCAR and Vehicle Technologies (FCVTs) traction drive motor. These traction drives are generally powered by radial-gap motors, having the magnets on or embedded in a rotating cylinder separated from the inside surface of a slotted cylindrical stator by an annular gap. The two main types of radial-gap PM rotors are those with magnets mounted on the surface of a supporting back iron, called PM surface mounted (PMSM) motors, and those with magnets mounted in slots in the rotor, called interior PM (IPM) motors. Most early PM motor research was on the PMSM motor, which was thought to have an inherently low stator inductance. A low stator inductance can lead to currents dangerously exceeding rated current as the back-emf across the inductance increases with speed; consequently, part of the attempted solution has been to increase the stator inductance to reduce the rate of current rise. Although analysis suggested that there should be no problem designing sufficiently high stator inductance into PMSMs, attempts to do so were often not successful and a motor design was sought that would have a higher intrinsic inductance. Commercial research at Toyota has focused on IPM motors because they can achieve a high-saliency ratio, which helps them operate over a high constant power speed ratio (CPSR), but they are more difficult to fabricate. The Oak Ridge National Laboratory's (ORNL) position has been to continue research on brushless direct current (dc) motors (BDCMs) because of ease of fabrication and increased power output. Recently there has been a revival of interest in a fractional-slot PMSMs [15] made with concentrated windings because they possess three important features. First, they can increase the motor's inductance sufficiently to reduce the characteristic current to value of the rated current, which will enable them to operate at high CPSR. This feature also limits short-circuit fault currents. Second, their segmented structure simplifies assembly problems and is expected to reduce assembly costs. Third, the back-emf waveform is nearly sinusoidal with low cogging. To examine in depth this design ORNL entered into a collaborative agreement with the University of Wisconsin to build and test a 6 kW laboratory demonstration unit. Design, fabrication, and testing of the unit to 4000 rpm were completed during FY 2005. The motor will be sent to ORNL to explore ways to control its inverter to achieve higher efficiency during FY 2006. This paper first reviews the concept of characteristic current and what is meant by optimal flux weakening. It then discusses application of the fractional-slot concentrated winding technique to increase the d-axis inductance of a PMSM showing how this approach differs from an integral-slot motor with sinusoidal-distributed windings. This discussion is followed by a presentation of collaborative analyses and comparison with the University of Wisconsin's measured data on a 6 kW, 36-slot, 30-pole motor with concentrated windings. Finally ORNL presents a PMSM design with integral-slot windings that appears to meet the FreedomCAR Specifications, but has some disadvantages. Further collaboration with the University of Wisconsin is planned for FY 2006 to design a motor that meets FreedomCAR specifications.

  10. The Effect of Equilibrating Mounted Dental Stone Casts in Maximum Intercuspation on the Occlusal Harmony of an Indirect Restoration

    E-Print Network [OSTI]

    Benson, Peter Andrew

    2013-12-13T23:59:59.000Z

    THE EFFECT OF EQUILIBRATING MOUNTED DENTAL STONE CASTS IN MAXIMUM INTERCUSPATION ON THE OCCLUSAL HARMONY OF AN INDIRECT RESTORATION A Thesis by PETER ANDREW BENSON Submitted to The Office of Graduate and Professional Studies... of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Chair of Committee, William W. Nagy Committee Members, Peter M. Buschang Carl G. Wirth Head of Department, William W. Nagy...

  11. History told from the depths of Lake Champlai: 1992-1993 Fort Ticonderoga-Mount Independence submerged cultural resource survey

    E-Print Network [OSTI]

    McLaughlin, Scott Arthur

    2000-01-01T23:59:59.000Z

    Campano Virginia West Funding The Fort Ticonderoga-Mount Independence Project could not have been completed without the cooperative efforts and funds from a number of federal and state government agencies. Federal funding was pmvided by the New... at its mouth (Johnson 1984). The topography and landforms visible today sunoundng the project area are products of ancient mountain-building process' and erosional forces of glaciers and rivers that gouged the valleys and scoured the surfaces...

  12. Fuel Economy and Emissions Effects of Low Tire Pressure, Open Windows, Roof Top and Hitch-Mounted Cargo, and Trailer

    SciTech Connect (OSTI)

    Thomas, John F [ORNL] [ORNL; Huff, Shean P [ORNL] [ORNL; West, Brian H [ORNL] [ORNL

    2014-01-01T23:59:59.000Z

    To quantify the fuel economy (FE) effect of some common vehicle accessories or alterations, a compact passenger sedan and a sport utility vehicle (SUV) were subjected to SAE J2263 coastdown procedures. Coastdowns were conducted with low tire pressure, all windows open, with a roof top or hitch-mounted cargo carrier, and with the SUV pulling an enclosed cargo trailer. From these coastdowns, vehicle dynamometer coefficients were developed which enabled the execution of vehicle dynamometer experiments to determine the effect of these changes on vehicle FE and emissions over standard drive cycles and at steady highway speeds. The FE penalty associated with the rooftop cargo box mounted on the compact sedan was as high as 25-27% at higher speeds, where the aerodynamic drag is most pronounced. For both vehicles, use of a hitch mounted cargo tray carrying a similar load resulted in very small FE penalties, unlike the rooftop cargo box. The results for the SUV pulling a 3500 pound enclosed cargo trailer were rather dramatic, resulting in FE penalties ranging from 30%, for the city cycle, to 50% at 80 mph, at which point significant CO generation indicated protective enrichment due to high load. Low tire pressure cases resulted in negligible to 10% FE penalty depending on the specific case and test point. Driving with all four windows open decreased FE by 4-8.5% for the compact sedan, and 1-4% for the SUV.

  13. Examination of core samples from the Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope: Effects of retrieval and preservation

    E-Print Network [OSTI]

    Collett, T.J. Kneafsey, T.J., H. Liu, W. Winters, R. Boswell, R. Hunter, and T.S.

    2012-01-01T23:59:59.000Z

    Mount Elbert Well) during drilling and coring operationsWell in February 2007. Coring was performed while using a custom oil-based drillingWell, pressure coring was not used, thus the core was depressurized upon ascent. Drilling

  14. Analysis of core samples from the BPXA-DOE-USGS Mount Elbert gas hydrate stratigraphic test well: Insights into core disturbance and handling

    E-Print Network [OSTI]

    Kneafsey, Timothy J.

    2010-01-01T23:59:59.000Z

    Mount Elbert Well) during drilling and coring operationsWell in February 2007. Coring was performed while using a custom oil-based drillingWell, pressure coring was not used, thus the core was depressurized upon ascent. Drilling

  15. Post-fire Tree Establishment Patterns at the Subalpine Forest-Alpine Tundra Ecotone: A Case Study in Mount Rainier National Park 

    E-Print Network [OSTI]

    Stueve, Kirk M.

    2010-10-12T23:59:59.000Z

    with the physical environment. This dissertation employs a landscape ecology approach to examine the abiotic and biotic ecological mechanisms most important in controlling tree establishment at this ecotone. The study site is on the western slopes of Mount Rainier...

  16. Evacuated optical structure comprising optical bench mounted to sidewall of vacuum chamber in a manner which inhibits deflection and rotation of the optical bench

    DOE Patents [OSTI]

    Bowers, Joel M. (Livermore, CA)

    1994-01-01T23:59:59.000Z

    An improved evacuated optical structure is disclosed comprising an optical bench mounted in a vacuum vessel in a manner which inhibits transmission of movement of the vacuum vessel to the optical bench, yet provides a compact and economical structure. The vacuum vessel is mounted, through a sidewall thereof, to a support wall at four symmetrically positioned and spaced apart areas, each of which comprises a symmetrically positioned group of mounting structures passing through the sidewall of the vacuum vessel. The optical bench is pivotally secured to the vacuum vessel by four symmetrically spaced apart bolts and spherical bearings, each of which is centrally positioned within one of the four symmetrically positioned groups of vacuum vessel mounting structures. Cover plates and o-ring seals are further provided to seal the vacuum vessel mounting structures from the interior of the vacuum vessel, and venting bores are provided to vent trapped gases in the bores used to secure the cover plates and o-rings to the vacuum vessel. Provision for detecting leaks in the mounting structures from the rear surface of the vacuum vessel sidewall facing the support wall are also provided. Deflection to the optical bench within the vacuum vessel is further minimized by tuning the structure for a resonant frequency of at least 100 Hertz.

  17. Evacuated optical structure comprising optical bench mounted to sidewall of vacuum chamber in a manner which inhibits deflection and rotation of the optical bench

    DOE Patents [OSTI]

    Bowers, J.M.

    1994-04-19T23:59:59.000Z

    An improved evacuated optical structure is disclosed comprising an optical bench mounted in a vacuum vessel in a manner which inhibits transmission of movement of the vacuum vessel to the optical bench, yet provides a compact and economical structure. The vacuum vessel is mounted, through a sidewall thereof, to a support wall at four symmetrically positioned and spaced apart areas, each of which comprises a symmetrically positioned group of mounting structures passing through the sidewall of the vacuum vessel. The optical bench is pivotally secured to the vacuum vessel by four symmetrically spaced apart bolts and spherical bearings, each of which is centrally positioned within one of the four symmetrically positioned groups of vacuum vessel mounting structures. Cover plates and o-ring seals are further provided to seal the vacuum vessel mounting structures from the interior of the vacuum vessel, and venting bores are provided to vent trapped gases in the bores used to secure the cover plates and o-rings to the vacuum vessel. Provision for detecting leaks in the mounting structures from the rear surface of the vacuum vessel sidewall facing the support wall are also provided. Deflection to the optical bench within the vacuum vessel is further minimized by tuning the structure for a resonant frequency of at least 100 Hertz. 10 figures.

  18. Radioisotope Thermoelectric Generator Transporation System licensed hardware second certification test series and package shock mount system test

    SciTech Connect (OSTI)

    Ferrell, P.C.; Moody, D.A.

    1995-10-01T23:59:59.000Z

    This paper presents a summary of two separate drop test a e performed in support of the Radioisotope Thermoelectric Generator (RTG) Transportation System (RTGTS). The first portion of this paper presents the second series of drop testing required to demonstrate that the RTG package design meets the requirements of Title 10, Code of Federal Regulations, ``Part 71`` (10 CFR 71). Results of the first test series, performed in July 1994, demonstrated that some design changes were necessary. The package design was modified to improve test performance and the design changes were incorporated into the Safety Analysis Report for Packaging (SARP). The second full-size certification test article (CTA-2) incorporated the modified design and was tested at the US Department of Energy`s (DOE) Hanford Site near Richland, Washington. With the successful completion of the test series, and pending DOE Office of Facility Safety Analysis approval of the SARP, a certificate of compliance will be issued for the RTG package allowing its use. The second portion of this paper presents the design and testing of the RTG Package Mount System. The RTG package mount was designed to protect the RTG from excessive vibration during transport, provide shock protection during on/off loading, and provide a mechanism for moving the RTG package with a forklift. Military Standard (MIL-STD) 810E, Transit Drop Procedure (DOE 1989), was used to verify that the shock limiting system limited accelerations in excess of 15 G`s at frequencies below 150 Hz. Results of the package mount drop tests indicate that an impact force of 15 G`s was not exceeded in any test from a free drop height of 457 mm (18 in.).

  19. Radioisotope Thermoelectric Generator Transportation System licensed hardware second certification test series and package shock mount system test

    SciTech Connect (OSTI)

    Ferrell, P.C.; Moody, D.A. [Westinghouse Hanford Company, P.O. Box 1970, Richland, Washington 99352 (United States)

    1996-03-01T23:59:59.000Z

    This paper presents a summary of two separate drop test activities that were performed in support of the Radioisotope Thermoelectric Generator (RTG) Transportation System (RTGTS). The first portion of this paper presents the second series of drop testing required to demonstrate that the RTG package design meets the requirements of {ital Title} 10, {ital Code} {ital of} {ital Federal} {ital Regulations}, {open_quote}{open_quote}Part 71{close_quote}{close_quote} (10 CFR 71). Results of the first test series, performed in July 1994, demonstrated that some design changes were necessary. The package design was modified to improve test performance and the design changes were incorporated into the Safety Analysis Report for Packaging (SARP). The second full-size certification test article (CTA-2) incorporated the modified design and was tested at the U.S. Department of Energy{close_quote}s (DOE) Hanford Site near Richland, Washington. With the successful completion of the test series, and pending DOE Office of Facility Safety Analysis approval of the SARP, a certificate of compliance will be issued for the RTG package allowing its use. The second portion of this paper presents the design and testing of the RTG Package Mount System. The RTG package mount was designed to protect the RTG from excessive vibration during transport, provide shock protection during on/off loading, and provide a mechanism for moving the RTG package with a forklift. Military Standard (MIL-STD) 810E, {ital Transit} {ital Drop} {ital Procedure} (DOE 1989), was used to verify that the shock limiting system limited accelerations in excess of 15 G{close_quote}s at frequencies below 150 Hz. Results of the package mount drop tests indicate that an impact force of 15 G{close_quote}s was not exceeded in any test from a free drop height of 457 mm (18 in.). {copyright} {ital 1996 American Institute of Physics.}

  20. Ambient Airborne Solids Concentrations Including Volcanic Ash at Hanford, Washington Sampling Sites Subsequent to the Mount St. Helens Eruption

    SciTech Connect (OSTI)

    Sehmel, G.A.

    1982-12-20T23:59:59.000Z

    A major eruption of Mount St. Helens occurred on May 18, 1980. Subsequently, airborne solid concentrations were measured as a function of time at two sites within the southern edge of the fallout plume about 211 km east of Mount St. Helens. This ash was a source for investigating area-wide resuspension. Rain had a variable effect on decreasing airborne concentrations from resuspension. From 0.5 to 1.5 cm of rain were required to significantly reduce airborne solid concentrations through July. For a more aged resuspension source in September, a rain of 2.0 cm had a negligible effect. A monthly average threshold-wind speed for resuspension was defined as 3.6 m/s. For monthly-average wind speeds less than the threshold wind speed, monthly-average airborne concentrations tended to decrease with time. A decrease was recorded between September and October. For this 4-month time period, the half-life was on the order of 50 days, corresponding to a weathering rate of 5.1 year/sup -1/.

  1. t's a pleasant surprise to many chemical engineers and

    E-Print Network [OSTI]

    Simaan, Nabil

    water's behavior in extreme tem- perature and pressure conditions.This information could be extremely tiny lubricants to oil the molecular machines that may someday course through the bloodstream in the difficulties inherent in pre- dicting the behavior of massive numbers of molecules in a variety of conditions

  2. Heidi Garrett-Peltier 418 North Pleasant Street

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Economics, Amherst, Massachusetts #12;Conducted outreach; Researched and applied for grants; Developed Researched educational issues and how they related to Connecticut's economic development. Publications Pollin. Military Spending and Jobs in Massachusetts, Political Economy Research Institute, May 2012

  3. Kentucky River Pleasant Hill/ S.R.33 Burgin

    E-Print Network [OSTI]

    Finkel, Raphael

    plumbing (no sink, no toilets). There is a refrigerator and (hopefully) a sufficient number of electrical

  4. MHK Projects/Point Pleasant Project | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant Jump to:LandownersLuther, Oklahoma:Energy Information BasinRiver571°, -91.1172°

  5. West Pleasant View, Colorado: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown ofNationwideWTED JumpHills, New York: EnergyMountain, Utah:Orange,WestFood

  6. Pleasant Gap, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S APlataforma Itaipu deValleyPleak,

  7. Pleasant Grove, Utah: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S APlataforma Itaipu deValleyPleak,Grove,

  8. Pleasant Hill, California: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S APlataforma Itaipu

  9. Pleasant Hill, Iowa: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S APlataforma ItaipuIowa: Energy Resources

  10. Pleasant Hill, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S APlataforma ItaipuIowa: Energy

  11. Pleasant Hills, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S APlataforma ItaipuIowa: EnergyMaryland:

  12. Pleasant Hills, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S APlataforma ItaipuIowa:

  13. Pleasant Plains, Illinois: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S APlataforma ItaipuIowa:Plains, Illinois:

  14. Pleasant Ridge, Michigan: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S APlataforma ItaipuIowa:Plains,

  15. Pleasant Run Farm, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S APlataforma ItaipuIowa:Plains,Run Farm,

  16. Pleasant Run, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S APlataforma ItaipuIowa:Plains,Run

  17. Pleasant Springs, Wisconsin: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S APlataforma ItaipuIowa:Plains,RunSprings,

  18. Pleasant Valley, Alaska: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S APlataforma

  19. Pleasant Valley, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S APlataformaTexas: Energy Resources Jump

  20. Pleasants County, West Virginia: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S APlataformaTexas: Energy

  1. Point Pleasant Beach, New Jersey: Energy Resources | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S6665°,Jump to:

  2. City of Mt Pleasant, Iowa (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovationin Urban TransportMartinsville,Minidoka,City ofIowa (Utility

  3. City of Mt Pleasant, Tennessee (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovationin Urban TransportMartinsville,Minidoka,City ofIowa

  4. East Pleasant View, Colorado: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOEHazel Crest, Illinois: Energy Resources JumpNorthport, NewPatchogue,

  5. Efficiency increase and environmental benefits of using a gas turbine hybrid cycle in Mount Amiata geothermal area

    SciTech Connect (OSTI)

    Baldacci, A.; Papale, R.; Sabatelli, F. [Enel Spa Geothermal Generation Dept., Pisa (Italy); Bidini, G. [Universita di Perugia (Italy)

    1997-12-31T23:59:59.000Z

    A hybrid cycle scheme is described, integrating a gas turbine unit firing natural gas and a geothermal power plant. Gas turbine exhaust is used to superheat geothermal steam and, possibly, to feed a bottoming binary unit. The proposed cycle can retrofit existing geothermal plants and displays efficiencies (referred to fossil fuel use) comparable to those typical of large-size combined cycle plants. In the situation of Mount Amiata deep geothermal fields, other favorable features of this scheme include the possibility to take advantage of the water separated at wellhead. Of foremost importance, however, is the option of using the noncondensable gas discharged by the geothermal plant, mixed with the inlet air, to feed the gas turbine. Oxidation of hydrogen sulfide to sulfur dioxide can thus be cheaply accomplished, with an added efficiency increase. Technical aspects arising from the proposed scheme are discussed, and preliminary economic evaluations are presented.

  6. Method and apparatus for mounting a dichroic mirror in a microwave powered lamp assembly using deformable tabs

    DOE Patents [OSTI]

    Ury, M.; Sowers, F.; Harper, C.; Love, W.

    1998-11-24T23:59:59.000Z

    A microwave powered electrodeless lamp includes an improved screen unit having mesh and solid sections with an internal reflector secured at the juncture of the two sections to reflect light into a light-transmitting chamber defined in the lamp microwave cavity by the reflector and the mesh section. A discharge envelope of a bulb is disposed in the light-transmitting chamber. Light emitted from the envelope is prevented by the reflector from entering the cavity portion bounded by the solid section of the screen. The reflector is mounted in the cavity by tabs formed in the screen unit and bendable into the cavity to define support planes abutting respective surfaces of the reflector. The mesh section and tabs are preferably formed by etching a thin metal sheet. 7 figs.

  7. Method and apparatus for mounting a dichroic mirror in a microwave powered lamp assembly using deformable tabs

    DOE Patents [OSTI]

    Ury, Michael (Bethesda, MD); Sowers, Frank (Frederick, MD); Harper, Curt (Wheaton, MD); Love, Wayne (Olney, MD)

    1998-01-01T23:59:59.000Z

    A microwave powered electrodeless lamp includes an improved screen unit having mesh and solid sections with an internal reflector secured at the juncture of the two sections to reflect light into a light-transmitting chamber defined in the lamp microwave cavity by the reflector and the mesh section. A discharge envelope of a bulb is disposed in the light-transmitting chamber. Light emitted from the envelope is prevented by the reflector from entering the cavity portion bounded by the solid section of the screen. The reflector is mounted in the cavity by tabs formed in the screen unit and bendable into the cavity to define support planes abutting respective surfaces of the reflector. The mesh section and tabs are preferably formed by etching a thin metal sheet.

  8. Investigation of gas hydrate-bearing sandstone reservoirs at the "Mount Elbert" stratigraphic test well, Milne Point, Alaska

    SciTech Connect (OSTI)

    Boswell, R.M.; Hunter, R. (ASRC Energy Services, Anchorage, AK); Collett, T. (USGS, Denver, CO); Digert, S. (BP Exploration (Alaska) Inc., Anchorage, AK); Hancock, S. (RPS Energy Canada, Calgary, Alberta, Canada); Weeks, M. (BP Exploration (Alaska) Inc., Anchorage, AK); Mt. Elbert Science Team

    2008-01-01T23:59:59.000Z

    In February 2007, the U.S. Department of Energy, BP Exploration (Alaska), Inc., and the U.S. Geological Survey conducted an extensive data collection effort at the "Mount Elbert #1" gas hydrates stratigraphic test well on the Alaska North Slope (ANS). The 22-day field program acquired significant gas hydrate-bearing reservoir data, including a full suite of open-hole well logs, over 500 feet of continuous core, and open-hole formation pressure response tests. Hole conditions, and therefore log data quality, were excellent due largely to the use of chilled oil-based drilling fluids. The logging program confirmed the existence of approximately 30 m of gashydrate saturated, fine-grained sand reservoir. Gas hydrate saturations were observed to range from 60% to 75% largely as a function of reservoir quality. Continuous wire-line coring operations (the first conducted on the ANS) achieved 85% recovery through 153 meters of section, providing more than 250 subsamples for analysis. The "Mount Elbert" data collection program culminated with open-hole tests of reservoir flow and pressure responses, as well as gas and water sample collection, using Schlumberger's Modular Formation Dynamics Tester (MDT) wireline tool. Four such tests, ranging from six to twelve hours duration, were conducted. This field program demonstrated the ability to safely and efficiently conduct a research-level openhole data acquisition program in shallow, sub-permafrost sediments. The program also demonstrated the soundness of the program's pre-drill gas hydrate characterization methods and increased confidence in gas hydrate resource assessment methodologies for the ANS.

  9. Marine Biology International Journal on Life in Oceans

    E-Print Network [OSTI]

    Florida, University of

    . Godfrey · Brendan J. Godley · Lucy A. Hawkes · Thomas M. Murphy · Kristina L. Williams · Matthew J. Witt Department of Natural Resources, Mount Pleasant, SC 29464, USA e-mail: dubosegriffin@seaturtle.org Present

  10. Manipulator mounted transfer platform

    DOE Patents [OSTI]

    Dobbins, James C. (Idaho Falls, ID); Hoover, Mark A. (Idaho Falls, ID); May, Kay W. (Idaho Falls, ID); Ross, Maurice J. (Pocatello, ID)

    1990-01-01T23:59:59.000Z

    A transfer platform for the conveyance of objects by a manipulator includes a bed frame and saddle clamp secured along an edge of the bed frame and adapted so as to secure the bed frame to a horizontal crosspiece of the manipulator. The platform may thus move with the manipulator in a reciprocal linear path defined by a guide rail. A bed insert may be provided for the support of conveyed objects and a lifting bail may be provided to permit the manipulator arm to install the bed frame upon the crosspiece under remote control.

  11. Ceramic combustor mounting

    DOE Patents [OSTI]

    Hoffman, Melvin G. (Speedway, IN); Janneck, Frank W. (Danville, IN)

    1982-01-01T23:59:59.000Z

    A combustor for a gas turbine engine includes a metal engine block including a wall portion defining a housing for a combustor having ceramic liner components. A ceramic outlet duct is supported by a compliant seal on the metal block and a reaction chamber liner is stacked thereon and partly closed at one end by a ceramic bypass swirl plate which is spring loaded by a plurality of circumferentially spaced, spring loaded guide rods and wherein each of the guide rods has one end thereof directed exteriorly of a metal cover plate on the engine block to react against externally located biasing springs cooled by ambient air and wherein the rod spring support arrangement maintains the stacked ceramic components together so that a normal force is maintained on the seal between the outlet duct and the engine block under all operating conditions. The support arrangement also is operative to accommodate a substantial difference in thermal expansion between the ceramic liner components of the combustor and the metal material of the engine block.

  12. Inboard seal mounting

    DOE Patents [OSTI]

    Hayes, John R. (Indianapolis, IN)

    1983-01-01T23:59:59.000Z

    A regenerator assembly for a gas turbine engine has a hot side seal assembly formed in part by a cast metal engine block having a seal recess formed therein that is configured to supportingly receive ceramic support blocks including an inboard face thereon having a regenerator seal face bonded thereto. A pressurized leaf seal is interposed between the ceramic support block and the cast metal engine block to bias the seal wear face into sealing engagement with a hot side surface of a rotary regenerator matrix.

  13. Geology and mineral resources of the Florence, Beaufort, Rocky Mount, and Norfolk 1/sup 0/ x 2/sup 0/ NTMS quadrangles. National Uranium Resource Evaluation program

    SciTech Connect (OSTI)

    Harris, W.B.

    1982-08-01T23:59:59.000Z

    This document provides geologic and mineral resources data for previously-issued Savannah River Laboratory hydrogeochemical and stream sediment reports of the Beaufort, Florence, Norfolk, and Rocky Mount 1/sup 0/ x 2/sup 0/ National Topographic Map Series quadrangles in the southeastern United States. This report is issued in draft form, without detailed technical and copy editing. This was done to make the report available to the public before the end of the National Uranium Resource Evaluation program.

  14. A 3-10 GHZLCR-matched Power Amplifier using Flip-Chip Mounted AlGaN/GaN HEMTs

    E-Print Network [OSTI]

    York, Robert A.

    WE4A-5 A 3-10 GHZLCR-matched Power Amplifier using Flip-Chip Mounted AlGaN/GaN HEMTs Jane J a GaN-based broadband power amplifier using AlGaN/GaN-HEMTs, grown on sapphire substrates amplifier using GaN- HEMTs-on-Sapphire. I INTRODUCTION GaN HEMTs have enormous potential for realizing high

  15. Regional long-term production modeling from a single well test, Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope

    SciTech Connect (OSTI)

    Anderson, Brian; Kurihara, Masanori; White, Mark D.; Moridis, George J.; Wilson, Scott J.; Pooladi-Darvish, Mehran; Gaddipati, Manohar; Masuda, Yoshihiro; Collett, T. S.; Hunter, Robert B.; Narita, Hideo; Rose, Kelly K.; Boswell, Ray

    2011-02-02T23:59:59.000Z

    Following the results from the open-hole formation pressure response test in the BPXA-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well (Mount Elbert well) using Schlumberger’s Modular Dynamics Formation Tester (MDT) wireline tool, the International Methane Hydrate Reservoir Simulator Code Comparison project performed long-term reservoir simulations on three different model reservoirs. These descriptions were based on 1) the Mount Elbert gas hydrate accumulation as delineated by an extensive history-matching exercise, 2) an estimation of the hydrate accumulation near the Prudhoe Bay L-pad, and 3) a reservoir that would be down-dip of the Prudhoe Bay L-pad and therefore warmer and deeper. All of these simulations were based, in part, on the results of the MDT results from the Mount Elbert Well. The comparison group’s consensus value for the initial perme- ability of the hydrate-filled reservoir (k = 0.12 mD) and the permeability model based on the MDT history match were used as the basis for subsequent simulations on the three regional scenarios. The simulation results of the five different simulation codes, CMG STARS, HydrateResSim, MH-21 HYDRES, STOMP-HYD, and TOUGHþHYDRATE exhibit good qualitative agreement and the variability of potential methane production rates from gas hydrate reservoirs is illustrated. As expected, the pre- dicted methane production rate increased with increasing in situ reservoir temperature; however, a significant delay in the onset of rapid hydrate dissociation is observed for a cold, homogeneous reservoir and it is found to be repeatable. The inclusion of reservoir heterogeneity in the description of this cold reservoir is shown to eliminate this delayed production. Overall, simulations utilized detailed information collected across the Mount Elbert reservoir either obtained or determined from geophysical well logs, including thickness (37 ft), porosity (35%), hydrate saturation (65%), intrinsic permeability (1000 mD), pore water salinity (5 ppt), and formation temperature (3.3–3.9 ?C). This paper presents the approach and results of extrapolating regional forward production modeling from history-matching efforts on the results from a single well test.

  16. X-ray CT Observations of Methane Hydrate Distribution Changes over Time in a Natural Sediment Core from the BPX-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well

    E-Print Network [OSTI]

    Kneafsey, T.J.

    2012-01-01T23:59:59.000Z

    and Englezos, P. , 2009. Gas hydrate formation in a variableDOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test WellFormation of natural gas hydrates in marine sediments. 1.

  17. The Enigma of Lithium: from CP Stars to K Giants. First Results of CP Star Observations Obtained at Mount Stromlo Observatory

    E-Print Network [OSTI]

    N. S. Polosukhina; N. A. Drake; M. Hack; R. de la Reza; P. R. Wood; A. V. Shavrina

    2003-01-09T23:59:59.000Z

    We present the results of the observations of some roAp stars made at Mount Stromlo Observatory during 17 nights in 2001 September-October. This long observing run permitted us to obtain a good phase-rotation coverage. In chemically peculiar magnetic stars, the Li I 6708 A spectral line presents very anomalous behaviour: in some stars it is a strong feature, in others, with similar atmospheric parameters, it is invisible. Interesting results were obtained for the roAp star HD 3980 which presents variations of the profile and position of the Li I line with the rotation period. These new observational results should serve as a base for the development of atmospheric models of ``Li-spotted'' roAp stars.

  18. Evaluation of the thermal resistance of a roof-mounted multi-reflective radiant barrier for tropical and humid conditions: Experimental study from field measurements

    E-Print Network [OSTI]

    Miranville, Frédéric; Guichard, Stéphane; Boyer, Harry; Praene, Jean Philippe; Bigot, Dimitri

    2012-01-01T23:59:59.000Z

    This paper deals with the experimental evaluation of a roof-mounted multi-reflective radiant barrier (MRRB), installed according to the state of the art, on a dedicated test cell. An existing experimental device was completed with a specific system for the regulation of the airflow rate in the upper air layer included in a typical roof from Reunion Island. Several experimental sequences were conducted to determine the thermal resistance of the roof according to several parameters and following a specific method. The mean method, well known in international standards (ISO 9869 - 1994) for the determination of the thermal resistance using dynamic data, was used. The method was implemented in a building simulation code in order to allow the determination of the thermal indicator automatically. Experimental results are proposed according to different seasonal periods and for different values of the airflow rate in the upper air layer

  19. Evaluation of the thermal resistance of a roof-mounted multi-reflective radiant barrier for tropical and humid conditions: Experimental study from field measurements

    E-Print Network [OSTI]

    Frédéric Miranville; Ali Hamada Fakra; Stéphane Guichard; Harry Boyer; Jean Philippe Praene; Dimitri Bigot

    2012-12-19T23:59:59.000Z

    This paper deals with the experimental evaluation of a roof-mounted multi-reflective radiant barrier (MRRB), installed according to the state of the art, on a dedicated test cell. An existing experimental device was completed with a specific system for the regulation of the airflow rate in the upper air layer included in a typical roof from Reunion Island. Several experimental sequences were conducted to determine the thermal resistance of the roof according to several parameters and following a specific method. The mean method, well known in international standards (ISO 9869 - 1994) for the determination of the thermal resistance using dynamic data, was used. The method was implemented in a building simulation code in order to allow the determination of the thermal indicator automatically. Experimental results are proposed according to different seasonal periods and for different values of the airflow rate in the upper air layer.

  20. Holocene lahars and their byproducts along the historical path of the White River between Mount Rainier and Seattle: Geological Society of America Field Trip

    SciTech Connect (OSTI)

    Brown, T A; Zehfuss, P H; Atwater, B F; Vallance, J W; Brenniman, H

    2003-10-16T23:59:59.000Z

    Clay-poor lahars of late Holocene age from Mount Rainier change down the White River drainage into lahar-derived fluvial and deltaic deposits that filled an arm of Puget Sound between the sites of Auburn and Seattle, 110-150 km downvalley from the volcano's summit. Lahars in the debris-flow phase left cobbly and bouldery deposits on the walls of valleys within 70 km of the summit. At distances of 80-110 km, transitional (hyperconcentrated) flows deposited pebbles and sand that coat terraces in a gorge incised into glacial drift and the mid-Holocene Osceola Mudflow. On the broad, level floor of the Kent valley at 110-130 km, lahars in the runout or streamflow phase deposited mostly sand-size particles that locally include the trunks of trees probably entrained by the flows. Beyond 130 km, in the Duwamish valley of Tukwila and Seattle, laminated andesitic sand derived from Mount Rainier built a delta northward across the Seattle fault. This distal facies, warped during an earthquake in A.D. 900-930, rests on estuarine mud at depths as great as 20 m. The deltaic filling occurred in episodes that appear to overlap in time with the lahars. As judged from radiocarbon ages of twigs and logs, at least three episodes of distal deposition postdate the Osceola Mudflow. One of these episodes occurred about 2200-2800 cal yr B.P., and two others occurred 1700-1000 cal yr B.P. The most recent episode ended by about the time of the earthquake of A.D. 900-930. The delta's northward march to Seattle averaged between 6 and 14 m/yr in the late Holocene.

  1. Simulations of Variable Bottomhole Pressure Regimes to Improve Production from the Double-Unit Mount Elbert, Milne Point Unit, North Slope Alaska Hydrate Deposit

    SciTech Connect (OSTI)

    Myshakin, Evgeniy; Anderson, Brian; Rose, Kelly; Boswell, Ray

    2011-01-01T23:59:59.000Z

    Gas production was predicted from a reservoir model based on the Mount Elbert gas hydrate accumulation located on the Alaska North slope at various simulator submodels and production scenarios. Log, core, and fluid measurements were used to provide a comprehensive reservoir description. These data were incorporated with experimentally derived saturations, porosities, permeability values, parameters for capillary pressure, and relative permeability functions. The modeled reservoir exposed to depressurization at a constant bottomhole pressure (2.7 MPa) has shown limited production potential due to its low temperature profile. To improve production the bottomhole pressure was allowed to vary from 2.7 (above the quadruple point) to 2.0 MPa over a 15-year period. The results indicate that gas production was nearly doubled in comparison with a constant-pressure regime. Extensive ice formation and hydrate reformation that could severely hinder gas production were avoided in the variable-pressure regime system. A use of permeability variation coupled with porosity change is shown to be crucial to predict those phenomena at a reservoir scale.

  2. Mount Holyoke College Peter Shaffer

    E-Print Network [OSTI]

    Washington at Seattle, University of - Department of Physics, Electroweak Interaction Research Group

    "2: Net force is zero so E field is zero" _______________________ "2 is zero because it's in between Incorrect Answer (Non-tangent at Point D) Zero at Point B #12;Electric Potential Difference (EPD) Tutorial the direction of the electric field for each point. Select zero if the field is zero at any point. 9 #12;Pretest

  3. Analysis of core samples from the BPXA-DOE-USGS Mount Elbert gas hydrate stratigraphic test well: Insights into core disturbance and handling

    SciTech Connect (OSTI)

    Kneafsey, Timothy J.; Lu, Hailong; Winters, William; Boswell, Ray; Hunter, Robert; Collett, Timothy S.

    2009-09-01T23:59:59.000Z

    Collecting and preserving undamaged core samples containing gas hydrates from depth is difficult because of the pressure and temperature changes encountered upon retrieval. Hydrate-bearing core samples were collected at the BPXA-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well in February 2007. Coring was performed while using a custom oil-based drilling mud, and the cores were retrieved by a wireline. The samples were characterized and subsampled at the surface under ambient winter arctic conditions. Samples thought to be hydrate bearing were preserved either by immersion in liquid nitrogen (LN), or by storage under methane pressure at ambient arctic conditions, and later depressurized and immersed in LN. Eleven core samples from hydrate-bearing zones were scanned using x-ray computed tomography to examine core structure and homogeneity. Features observed include radial fractures, spalling-type fractures, and reduced density near the periphery. These features were induced during sample collection, handling, and preservation. Isotopic analysis of the methane from hydrate in an initially LN-preserved core and a pressure-preserved core indicate that secondary hydrate formation occurred throughout the pressurized core, whereas none occurred in the LN-preserved core, however no hydrate was found near the periphery of the LN-preserved core. To replicate some aspects of the preservation methods, natural and laboratory-made saturated porous media samples were frozen in a variety of ways, with radial fractures observed in some LN-frozen sands, and needle-like ice crystals forming in slowly frozen clay-rich sediments. Suggestions for hydrate-bearing core preservation are presented.

  4. Examination of core samples from the Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope: Effects of retrieval and preservation

    SciTech Connect (OSTI)

    Kneafsey, T.J.; Liu, T.J. H.; Winters, W.; Boswell, R.; Hunter, R.; Collett, T.S.

    2011-06-01T23:59:59.000Z

    Collecting and preserving undamaged core samples containing gas hydrates from depth is difficult because of the pressure and temperature changes encountered upon retrieval. Hydrate-bearing core samples were collected at the BPXA-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well in February 2007. Coring was performed while using a custom oil-based drilling mud, and the cores were retrieved by a wireline. The samples were characterized and subsampled at the surface under ambient winter arctic conditions. Samples thought to be hydrate bearing were preserved either by immersion in liquid nitrogen (LN), or by storage under methane pressure at ambient arctic conditions, and later depressurized and immersed in LN. Eleven core samples from hydrate-bearing zones were scanned using x-ray computed tomography to examine core structure and homogeneity. Features observed include radial fractures, spalling-type fractures, and reduced density near the periphery. These features were induced during sample collection, handling, and preservation. Isotopic analysis of the methane from hydrate in an initially LN-preserved core and a pressure-preserved core indicate that secondary hydrate formation occurred throughout the pressurized core, whereas none occurred in the LN-preserved core, however no hydrate was found near the periphery of the LN-preserved core. To replicate some aspects of the preservation methods, natural and laboratory-made saturated porous media samples were frozen in a variety of ways, with radial fractures observed in some LN-frozen sands, and needle-like ice crystals forming in slowly frozen clay-rich sediments. Suggestions for hydrate-bearing core preservation are presented.

  5. The MHC and body odors: arbitrary effects caused by shifts of mean pleasantness 

    E-Print Network [OSTI]

    Wedekind, Claus

    The main conclusions of the study by Jacob et al.1 published in February's issue of Nature Genetics differ from those of most previous studies of the major histocompatibility complex (MHC) and mate or odor preference in ...

  6. Geology of Devonian shale oil and gas in Pleasants, Wood, and Ritchie Counties, WV

    SciTech Connect (OSTI)

    Filer, J.K.

    1984-05-01T23:59:59.000Z

    The Upper Devonian shale play of western West Virginia is an area of active development of unconventional oil and gas reserves. It is unconventional in that production is from fine grained fractured reservoirs. Examination of recent drilling results has led to a more detailed understanding of the structure and stratigraphy of the area, which in turn can explain some of the production trends observed. Areas of greater fracture density and therefore higher productivity are related to areas of shearing motion in the Burning Springs Thrust Sheet. Open flows after stimulation in these wells can be very high, but first year decline is rapid. At this time it is uncertain how long a production life these wells will have.

  7. Geology of Devonian shale oil and gas in Pleasants, Wood, and Ritchie Counties, West Virginia

    SciTech Connect (OSTI)

    Filer, J.K.

    1987-12-01T23:59:59.000Z

    The Upper Devonian shale play of western West Virginia is an area of active development of unconventional oil and gas reserves. It is unconventional in that production is from fine-grained fractured reservoirs. Examination of recent drilling results has led to a more detailed understanding of the structure and stratigraphy of the area, which in turn can explain some of the production trends observed. Areas of greater fracture density and therefore higher productivity are related to areas of shearing motion in the Burning Springs thrust sheet. Open flows after stimulation in these wells can be very high, but first-year decline is rapid. It is uncertain at this time how long a production life these wells will have.

  8. The Earth had been a very warm and pleasant planet for more

    E-Print Network [OSTI]

    Archimedes and the bath tub), but if the ice caps of Greenland or Antarctica were to melt (or slide, Earth would have been clearly recognisable from space as a green and blue planet with ice caps on both), and we may be on our way back to the single-capped planet of the Pliocene. Ice loss In the last 30 years

  9. Entertainment Technology Center, CMU Internship Survey Results, Dec 2013, May 2014, and Dec 2014

    E-Print Network [OSTI]

    Matsuda, Noboru

    Developer Mount Pleasant SC Visionary Works LLC UX Designer, Game Programmer Washington DC VOCI Technology, NM, OK, TX 2 West: CA, HI, NV 16 Southeast: AL, AR, FL, GA, KY, LA, MS, NC, PR, SC, TN 1 Midwest: IA Emails 28 Faculty Contacts 22 Personal Network 17 Interviews Arranged by Career Services 9 Intern Search

  10. Glaciohydraulic supercooling in former ice sheets? Grahame J. Larson a,*, Daniel E. Lawson b

    E-Print Network [OSTI]

    Lachniet, Matthew S.

    a Department of Geological Sciences, Michigan State University, East Lansing MI 48824, USA b Geophysical Vegas, NV 89154-4010, USA g Department of Geology, Central Michigan University, Mount Pleasant, MI 48859Glaciohydraulic supercooling in former ice sheets? Grahame J. Larson a,*, Daniel E. Lawson b

  11. Molecular Ecology Notes (2006) 6, 10061009 doi: 10.1111/j.1471-8286.2006.01473.x 2006 The Authors

    E-Print Network [OSTI]

    Swanson, Bradley J.

    2006-01-01T23:59:59.000Z

    *Applied Technology in Conservation Genetics Laboratory, Brooks Hall, Central Michigan University, Mount Pleasant, MI 48859, USA, School of Arts and Sciences, University of Alaska Southeast, Juneau, AK 99801, USA Abstract Obtaining a sufficient number of DNA samples from ice-breeding marine phocids, in a noninvasive

  12. Salt dome discoveries mounting in Mississippi

    SciTech Connect (OSTI)

    Ericksen, R.L. [Mississippi Office of Geology, Jackson, MS (United States)

    1996-06-17T23:59:59.000Z

    Exploratory drilling around piercement salt domes in Mississippi has met with a string of successes in recent months. Exploration of these salt features is reported to have been initiated through the review of non-proprietary, 2D seismic data and subsurface control. This preliminary data and work were then selectively upgraded by the acquisition of additional, generally higher quality, conventional 2D seismic lines. This current flurry of successful exploration and ensuing development drilling by Amerada Hess Corp. on the flanks of salt domes in Mississippi has resulted in a number of significant Hosston discoveries/producers at: Carson salt dome in Jefferson Davis County; Dry Creek salt dome in Covington County, Midway salt dome in lamar County, Monticello salt dome in Lawrence County, and Prentiss salt dome in Jefferson Davis County. The resulting production from these fields is gas and condensate, with wells being completed on 640 acre production units.

  13. Laboratory Performance Testing of Residential Window Mounted...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Key Issues High-Efficiency Window Air Conditioners - Building America Top Innovation 2014-05-05 Issuance: Test Procedure for Portable Air Conditioners; Notice of Data Availability...

  14. Fiber optic mounted laser driven flyer plates

    DOE Patents [OSTI]

    Paisley, Dennis L. (Santa Fe, NM)

    1991-01-01T23:59:59.000Z

    A laser driven flyer plate where the flyer plate is deposited directly onto the squared end of an optical fiber. The plasma generated by a laser pulse drives the flyer plate toward a target. In another embodiment, a first metal layer is deposited onto the squared end of an optical fiber, followed by a layer of a dielectric material and a second metal layer. The laser pulse generates a plasma in the first metal layer, but the plasma is kept away from the second metal layer by the dielectric layer until the pressure reaches the point where shearing occurs.

  15. Plasma Screen Floating Mount - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeedingBiomassPPPOPetroleum38 (1996) A213-A225. Printed in the UK4

  16. Mount Wachusetts Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRose BendMiasole IncMinutemanVistaZephyr)

  17. Mount Spurr Geothermal Project | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill,Spurr Geothermal Project Jump to: navigation,

  18. X-ray CT Observations of Methane Hydrate Distribution Changes over Time in a Natural Sediment Core from the BPX-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well

    SciTech Connect (OSTI)

    Kneafsey, T.J.; Rees, E.V.L.

    2010-03-01T23:59:59.000Z

    When maintained under hydrate-stable conditions, methane hydrate in laboratory samples is often considered a stable and immobile solid material. Currently, there do not appear to be any studies in which the long-term redistribution of hydrates in sediments has been investigated in the laboratory. These observations are important because if the location of hydrate in a sample were to change over time (e.g. by dissociating at one location and reforming at another), the properties of the sample that depend on hydrate saturation and pore space occupancy would also change. Observations of hydrate redistribution under stable conditions are also important in understanding natural hydrate deposits, as these may also change over time. The processes by which solid hydrate can move include dissociation, hydrate-former and water migration in the gas and liquid phases, and hydrate formation. Chemical potential gradients induced by temperature, pressure, and pore water or host sediment chemistry can drive these processes. A series of tests were performed on a formerly natural methane-hydrate-bearing core sample from the BPX-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well, in order to observe hydrate formation and morphology within this natural sediment, and changes over time using X-ray computed tomography (CT). Long-term observations (over several weeks) of methane hydrate in natural sediments were made to investigate spatial changes in hydrate saturation in the core. During the test sequence, mild buffered thermal and pressure oscillations occurred within the sample in response to laboratory temperature changes. These oscillations were small in magnitude, and conditions were maintained well within the hydrate stability zone.

  19. Summary of environmental investigation of a closed reserve pit located within the pleasant bayou geopressured/geothermal lease

    SciTech Connect (OSTI)

    None

    1991-11-18T23:59:59.000Z

    This investigation consisted of collecting 24 soil samples, 12 from a depth of 5 inches and 12 from 6 feet, and analyzing each one for 9 heavy metals, plus Hexavalent Chromium, 5 anions, and 4 cations. These tests were conducted to establish the composition of the soil from within the pit (samples, test no.1 thru 10) and from two sites outside the pit area (control no.1 and 2). The results would determine whether the pit closure continued to satisfy federal, state and/or local regulations, or whether additional analytical work was called for to establish if follow-up remediation was required.

  20. Depositional Environment, Reservoir Properties, and EOR Potential of an Incised-valley-fill Sandstone, Pleasant Prairie Oilfield, Haskell County, Kansas

    E-Print Network [OSTI]

    Senior, Peter

    2012-12-31T23:59:59.000Z

    of modeled original oil in place to production data suggests inaccuracy of reservoir models at the scale of individual well drainage areas. Waterflooding of the reservoir has proven successful for >10 years, and remaining oil in place ranges from 7.8&ndash...

  1. The association of the cotton fleahopper (Pseudatomoscelis seriatus Reuter (Hemiptera: Miridae)) with IAA and 1-aminocyclopropane-1- carboxylic acid and their role in cotton square abscission

    E-Print Network [OSTI]

    Burden, Beverly Jo

    1987-01-01T23:59:59.000Z

    . Norgan ) Roger W. Neola (~) Narvin K. Harris (Neaber) G. 1 (Head of Department) Nay 1987 The Association Of The Cotton Fleaho)pper (Pseudatcmosoelis seriatus Reuter Hemiptera: Niridae) ) with IAA and I-Rninocyclo)rrapane-1-carhca~lic Acid... required to stimulate abscission. . . . 32 2 The percentage of fleahoppers located cn the cotton terminals, agar, cn the side of the flask, or unlocated, at 36 Tbs cotton fleahopper, pseudatomoscelis seriatus, Reuter (Hemiptera: Miridae), is an early...

  2. Demonstration of Rack-Mounted Computer Equipment Cooling Solutions

    E-Print Network [OSTI]

    for encouraging their member companies to perform demonstrations of energy efficiency technologies related to data, under Contract No. 500-09-002, and by the Assistant Secretary for Energy Efficiency and Renewable Energy Program, championed and driven by Data Center Pulse (DCP) - http://datacenterpulse.org/TheChillOff (last

  3. Data Book 1 2003-05 Surface Mount Capacitive Silicon

    E-Print Network [OSTI]

    Noé, Reinhold

    interface for side airbag applications. The basic accuracy including temperature drift is ±5%. The KP100

  4. Project Profile: Solar, Install, Mount, Production, Labor, Equipment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    integration research that are in progress. SunShot Home About Concentrating Solar Power Photovoltaics Systems Integration Research, Development, & Demonstration Competitive...

  5. Geologic map of the Mount Adams Quadrangle, Washington

    SciTech Connect (OSTI)

    Korosec, M.A. (comp.)

    1987-01-01T23:59:59.000Z

    This report is comprised of a 1:100,000 scale geologic map and accompanying text. The text consists of unit descriptions, a table of age dates, a table of major element geochemistry, correlation diagram, and a source of mapping diagram. (ACR)

  6. Hydrothermal Circulation At Mount St Helens Determined By Self...

    Open Energy Info (EERE)

    the dome summit. The anomaly pattern is believed to result from a combination of thermoelectric, electrokinetic, and fluid disruption effects within and surrounding the dome....

  7. Constant power speed range extension of surface mounted PM motors

    DOE Patents [OSTI]

    Lawler, Jack Steward (Knoxville, TN); Bailey, John Milton (Knoxville, TN)

    2001-01-01T23:59:59.000Z

    A circuit and method for controlling a rotating machine (11) in the constant horsepower range above base speed uses an inverter (15) having SCR's (T1-T6) connected in series with the primary commutation switches (Q1-Q6) to control turn off of the primary commutation switches and to protect the primary commutation switches from faults. The primary commutation switches (Q1-Q6) are controlled by a controller (14), to fire in advance or after a time when the back emf equals the applied voltage, and then to turn off after a precise dwell time, such that suitable power is developed at speeds up to at least six times base speed.

  8. An active seismic reconnaissance survey of the Mount Princeton...

    Open Energy Info (EERE)

    Abstract Abstract unavailable. Author J.S. Crompton Organization Colorado School of Mines Published Publisher Not Provided, 1976 DOI Not Provided Check for DOI...

  9. Japan Tuna Fishery Bankruptcies Mount New Manuals Promote Seafood Quality

    E-Print Network [OSTI]

    or energy problems, but that a large find could eventually make the region self-sufficient in natural gas the Sea Grant Program, Texas A&M University, College Station, TX 77843. Impacts of Offshore Oil Forecast and low prices for oil and gas, and one and three regional refineries. The econ- omist said development

  10. Controlled Burns on the Urban Fringe, Mount Tamalpais, Marin County,

    E-Print Network [OSTI]

    Standiford, Richard B.

    concern, such as colluvial-filled hollows, will be included in the development of the prescription to break up brush fields that threaten life and property in the town of Mill Valley (Selfridge 1986a

  11. automated sample mounting: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

  12. apollo telescope mount: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    relate it to tracking imagers and the science instrument, set up the oscillating secondary mirror, and aggregate pointings into relocatable nods and dithers. Gross, Michael A...

  13. Vibration Isolation of a Locomotive Mounted Energy Storage Flywheel

    E-Print Network [OSTI]

    Zhang, Xiaohua

    2011-02-22T23:59:59.000Z

    Utilizing flywheels to store and reuse energy from regenerative braking on locomotives is a new technology being developed in the Vibration Control and Electromechanics Lab at Texas A&M. This thesis focuses on the motion analysis of a locomotive...

  14. Integrated head package for top mounted nuclear instrumentation

    DOE Patents [OSTI]

    Malandra, Louis J. (McKeesport, PA); Hornak, Leonard P. (Forest Hills, PA); Meuschke, Robert E. (Monroeville, PA)

    1993-01-01T23:59:59.000Z

    A nuclear reactor such as a pressurized water reactor has an integrated head package providing structural support and increasing shielding leading toward the vessel head. A reactor vessel head engages the reactor vessel, and a control rod guide mechanism over the vessel head raises and lowers control rods in certain of the thimble tubes, traversing penetrations in the reactor vessel head, and being coupled to the control rods. An instrumentation tube structure includes instrumentation tubes with sensors movable into certain thimble tubes disposed in the fuel assemblies. Couplings for the sensors also traverse penetrations in the reactor vessel head. A shroud is attached over the reactor vessel head and encloses the control rod guide mechanism and at least a portion of the instrumentation tubes when retracted. The shroud forms a structural element of sufficient strength to support the vessel head, the control rod guide mechanism and the instrumentation tube structure, and includes radiation shielding material for limiting passage of radiation from retracted instrumentation tubes. The shroud is thicker at the bottom adjacent the vessel head, where the more irradiated lower ends of retracted sensors reside. The vessel head, shroud and contents thus can be removed from the reactor as a unit and rested safely and securely on a support.

  15. Permanent magnet energy conversion machine with magnet mounting arrangement

    DOE Patents [OSTI]

    Hsu, John S. (Oak Ridge, TN); Adams, Donald J. (Knoxville, TN)

    1999-01-01T23:59:59.000Z

    A hybrid permanent magnet dc motor includes three sets of permanent magnets supported by the rotor and three sets of corresponding stators fastened to the surrounding frame. One set of magnets operates across a radial gap with a surrounding radial gap stator, and the other two sets of magnets operate off the respective ends of the rotor across respective axial gaps.

  16. Direct mounted photovoltaic device with improved front clip

    SciTech Connect (OSTI)

    Keenihan, James R; Boven, Michelle; Brown, Jr., Claude; Gaston, Ryan S; Hus, Michael; Langmaid, Joe A; Lesniak, Mike

    2013-11-05T23:59:59.000Z

    The present invention is premised upon a photovoltaic assembly system for securing and/or aligning at least a plurality of vertically adjacent (overlapping) photovoltaic device assemblies to one another. The securing function being accomplished by a clip member that may be a separate component or integral to one or more of the photovoltaic device assemblies.

  17. Direct mounted photovoltaic device with improved side clip

    DOE Patents [OSTI]

    Keenihan, James R; Boven, Michelle L; Brown, Jr., Claude; Eurich, Gerald K; Gaston, Ryan S; Hus, Michael

    2013-11-19T23:59:59.000Z

    The present invention is premised upon a photovoltaic assembly system for securing and/or aligning at least a plurality of vertically adjacent photovoltaic device assemblies to one another. The securing function being accomplished by a clip member that may be a separate component or integral to one or more of the photovoltaic device assemblies.

  18. Apparatus tube configuration and mounting for solid oxide fuel cells

    DOE Patents [OSTI]

    Zymboly, G.E.

    1993-09-14T23:59:59.000Z

    A generator apparatus is made containing long, hollow, tubular, fuel cells containing an inner air electrode, an outer fuel electrode, and solid electrolyte there between, placed between a fuel distribution board and a board which separates the combustion chamber from the generating chamber, where each fuel cell has an insertable open end and in insertable, plugged, closed end, the plugged end being inserted into the fuel distribution board and the open end being inserted through the separator board where the plug is completely within the fuel distribution board. 3 figures.

  19. Vibration Isolation of a Locomotive Mounted Energy Storage Flywheel 

    E-Print Network [OSTI]

    Zhang, Xiaohua

    2011-02-22T23:59:59.000Z

    Utilizing flywheels to store and reuse energy from regenerative braking on locomotives is a new technology being developed in the Vibration Control and Electromechanics Lab at Texas A&M. This thesis focuses on the motion ...

  20. SURFACE MOUNT FAST SWITCHING DIODE Fast Switching Speed

    E-Print Network [OSTI]

    Berns, Hans-Gerd

    ://www.diodes.com/datasheets/ap02001.pdf. 3. Short duration pulse test used to minimize self-heating effect. 4. Diodes Inc.'s "Green) RJA 833 °C/W Operating and Storage Temperature Range TJ , TSTG -65 to +150 °C Electrical

  1. Development of pulse laser processing for mounting fiber Bragg grating

    SciTech Connect (OSTI)

    Nishimura, Aikihko; Shimada, Yukihiro; Yonemoto, Yukihiro; Suzuki, Hirokazu; Ishibashi, Hisayoshi [Quantum Beam Science Directorate, Japan Atomic Energy Agency, 8-1-7 Umebidai Kidugawa Kyoto 619-0215 (Japan); Applied Laser Technology Institute, Tsuruga Head Office, Japan Atomic Energy Agency, 65-20 Kizaki Tsuruga Fukui 914-8585 (Japan); Technical Research and Development Institute, Kumagai Gumi Co., Ltd., 2-1 Tsukudo, Shinjuku Tokyo 162-8557 (Japan)

    2012-07-11T23:59:59.000Z

    Pulse laser processing has been developed for the application of industrial plants in monitoring and maintenance. Surface cleaning by nano-second laser ablation was demonstrated for decontamination of oxide layers of Cr contained steel. Direct writing by femtosecond processing induced a Bragg grating in optical fiber to make it a seismic sensor for structural health monitoring. Adhesive cement was used to fix the seismic sensor on the surface of reactor coolant pipe material. Pulse laser processing and its related technologies were presented to overcome the severe accidents of nuclear power plants.

  2. Charlton Heston: From Mount Sinai to Los Alamos

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWPSuccessAlamosCharacterization of Selective BindingD.

  3. Laboratory Performance Testing of Residential Window Mounted Air

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment ofLetter Report:40PM toLED

  4. Solar Install Mount Production Labor Equipment Simple Balance of Systems |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreakingMayDepartment of Energy Ready,SmartEnergyEnergy

  5. Department of Veterans Affairs, FONSI - Ground mounted solar photovoltaic

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No53197E T A * S H I E L D * A LFederal Employee Federalpower at

  6. Mount Charleston, Nevada: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRose BendMiasole IncMinutemanVistaZephyr) JumpMorroMoulton Chandler

  7. Mount Macedon, Australia: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRose BendMiasole IncMinutemanVistaZephyr) JumpMorroMoulton

  8. NedPower Mount Storm Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRoseConcerns Jump to: navigation,Nebraska/Wind Resources/FullWind Farm

  9. Spring Mount, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries Pvt LtdShawangunk,Southeast ColoradoOhio: EnergyIndiana: EnergyMills,

  10. An active seismic reconnaissance survey of the Mount Princeton area,

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty EditCalifornia: Energy Resources Jump to:Almo,TransmissionOperations at theChaffee

  11. Surficial Extent And Conceptual Model Of Hydrothermal System At Mount

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f <Maintained By FaultSunpods Inc Jump

  12. The Mount Princeton geothermal area, Chaffee County, Colorado | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f <MaintainedInformation 2EnergyCityGreen Data BookInformation

  13. Temporal Geochemical Variations In Volatile Emissions From Mount St Helens,

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries PvtStratosolar Jump to:HoldingsTechintIsNumeric JumpTerrace,

  14. Mount Carmel, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,Wave Group

  15. Mount Chase, Maine: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,Wave GroupChase, Maine: Energy

  16. Mount Healthy Heights, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,Wave GroupChase, Maine:

  17. Mount Healthy, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,Wave GroupChase, Maine:Healthy,

  18. Mount Holly, Vermont: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,Wave GroupChase,

  19. Mount Hood Village, Oregon: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,Wave GroupChase,Hood Village,

  20. Mount Hope, Kansas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,Wave GroupChase,Hood

  1. Mount Horeb, Wisconsin: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,Wave GroupChase,HoodHoreb,

  2. Mount Ivy, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,Wave GroupChase,HoodHoreb,Ivy,

  3. Mount Kisco, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,Wave

  4. Mount Lebanon, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,WaveLebanon, Pennsylvania:

  5. Mount Morris, Michigan: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,WaveLebanon,

  6. Mount Morris, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,WaveLebanon,York: Energy

  7. Mount Oliver, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,WaveLebanon,York: EnergyOliver,

  8. Mount Princeton Area Space Heating Low Temperature Geothermal Facility |

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,WaveLebanon,York:Open Energy

  9. Mount Prospect, Illinois: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,WaveLebanon,York:Open

  10. Mount Repose, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,WaveLebanon,York:OpenRepose,

  11. Mount Sinai, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill,

  12. Mount Tabor, Vermont: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill,Spurr Geothermal Project Jump to:

  13. Mount Vernon, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill,Spurr Geothermal Project Jump to:New York: Energy

  14. Mount Vernon, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill,Spurr Geothermal Project Jump to:New York:

  15. Mount Vernon, Virginia: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill,Spurr Geothermal Project Jump to:New

  16. NedPower Mount Storm LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer PlantMunhall, Pennsylvania: EnergyEnergy InformationNaturaSystems |LLC Jump to:

  17. City of Rocky Mount, North Carolina (Utility Company) | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model, clickInformation Smyrna Beach, FloridaCity ofCityInformation Rocky

  18. Curvilinearity in architecture: emotional effect of curvilinear forms in interior design

    E-Print Network [OSTI]

    Madani Nejad, Kayvan

    2007-09-17T23:59:59.000Z

    -8). ....................................................................................60 4.9 Histograms for (Unpleasant-Pleasant) Non-Architects .....................................61 4.10 Normal Q-Q Plot for (Unpleasant-Pleasant) Non-Architects ............................61 4.11 Box Plots for (Unpleasant-Pleasant) Non...-Pleasant) Architects .............................................66 4.14 Normal Q-Q Plot for (Unpleasant-Pleasant) Architects ....................................66 4.15 Box Plots for (Unpleasant-Pleasant) Architects...

  19. Seismic Moment Tensor Report for the 06 Aug 2007, M3.9 Seismic Event in Central Utah

    SciTech Connect (OSTI)

    Ford, S R; Dreger, D S; Walter, W R; Hellweg, M; Urhammer, R

    2007-08-15T23:59:59.000Z

    We have performed a complete moment tensor analysis (Minson and Dreger, 2007) of the seismic event, which occurred on Monday August 6, 2007 at 08:48:40 UTC, 21 km from Mount Pleasant, Utah. The purpose of this report is to present our scientific results, making them available to other researchers working on seismic source determination problems, and source type identification. In our analysis we used complete, three-component seismic records recorded by stations operated by the USGS, the University of Utah and EarthScope. The results of our analysis show that most of the seismic wave energy is consistent with an underground collapse, however the cause of the mine collapse is still unknown.

  20. Lateral Snow Transport, Fire and Changing Treelines in Mount San Gorgonio, California, U.S.A.

    E-Print Network [OSTI]

    Burton, Charles Dustin

    2012-01-01T23:59:59.000Z

    Ridge (TFR), Charlton Peak (CHP) and San Gorgonio Summit (JST). B. Charlton Peak (CHP). C. Ten Thousand Foot Ridge (JST), Charlton Peak (CHP), San Gorgonio (SGR), and Ten

  1. An Analysis of a Spreader Bar Crane Mounted Gamma-Ray Radiation Detection System

    E-Print Network [OSTI]

    Grypp, Matthew D

    2013-04-08T23:59:59.000Z

    above background or on EW work well for radiopharmaceuticals, which produce low-energy signatures and have similar spectral shapes to those produced by SNM (Ely et al. 2006). Radiopharmaceuticals are administered to a large number of individuals..., 99mTc is used; it is one of the most likely radionuclides to be detected. Other commonly used radionuclides are 51Cr, 67Ga 123I, 131I, 111In, and 201Tl, and depending on half-life, 16 can be detected for up to 115 days after the medical...

  2. Seismic and acoustic observations at Mount Erebus Volcano, Ross Island, Antarctica, 19941998

    E-Print Network [OSTI]

    Rowe, Charlotte

    the lava lake surface; however, this depth could be exaggerated by near-field radial tilt. Seismic and Kienle, 1986; Kaminuma, 1994). Additional remote monitoring included infrasonic microphones (Dibble et al., 1984; Kaminuma et al., 1985) and, from 1986 to 1990, television surveillance of the lava lake (Dibble

  3. Pioneering the New Grid: Pole-mounted Solar | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    state, performing two distinct functions. The devices not only generate energy through a solar panel that feeds into the grid, but also they are equipped with communications...

  4. Modeling Total Solar Irradiance Variations Using Automated Classification Software on Mount Wilson Data

    E-Print Network [OSTI]

    Ulrich, R. K.; Parker, D.; Bertello, L.; Boyden, J.

    2010-01-01T23:59:59.000Z

    S. , Joukoff, A. : 2004, Solar Phys. 224, 209. Djafer, D. ,a, S. , Egidi, A. : 2008, Solar Phys. 247, 225. Fazel, Z. ,Bernasconi, P.N. : 2008, Solar Phys. 248, 1. Foukal, P. ,

  5. An Analysis of a Spreader Bar Crane Mounted Gamma-Ray Radiation Detection System 

    E-Print Network [OSTI]

    Grypp, Matthew D

    2013-04-08T23:59:59.000Z

    photoelectric effect PMT photomultiplier tube PNNL Pacific Northwest National Laboratory viii PoT Port of Tacoma PVT poly-vinyl toluene R resolution RT real time RPM radiation portal monitor s second SBC spreader.... LITERATURE REVIEW ......................................................................................... 9 3.1 Radiation Portal Monitors ............................................................................ 9 3.2 General Areas...

  6. REDUCING THE RISK FROM VOLCANO HAZARDS Lahars of Mount Pinatubo, Philippines

    E-Print Network [OSTI]

    Torgersen, Christian

    , or the sudden failure of a natural dam, mixes with this loose volcanic material, creating mudflows that can

  7. FIELD DIFFUSION EQUATION IN HIGH-SPEED SURFACE-MOUNTED PERMANENT MAGNET

    E-Print Network [OSTI]

    Boyer, Edmond

    , having either internal or external rotor topologies and overlapping stator windings. This analysis positions of stator winding conductors [6-8], and (b) MMF harmonics caused by time harmonics in the stator of the stator slotting. The analytical results are compared with the ones obtained by numerical analysis using

  8. Scientists and engineers outdid themselves in 2005 in mounting exploratory expeditions

    E-Print Network [OSTI]

    .The discovery of a sort of hydrologic cycle shaping another world is a first. A fleet of other explorers joined insists that uranium enrichment is an inalienable right, leaving little hope that negotiations

  9. Spatial factors affecting primary succession on the Muddy River Lahar, Mount St. Helens, Washington

    E-Print Network [OSTI]

    del Moral, Roger

    in different CTs mingled spatially and in multivariate space. Species patterns were weakly related analysis (RDA), and Mantel tests to compare the vegetation relationships with explanatory factors. Plots cannot be predicted well from the data available, suggesting that there were no prominent deterministic

  10. Virtual Braille Display The VBD comprises a tactile display mounted on a frictionless slider moving

    E-Print Network [OSTI]

    Hayward, Vincent

    . The blades' corners were beveled to create a linear array of skin contactors with spatial period of 0.88 mm combinations appearing 5 times in a randomized order. Some subjects were tested under both possible virtual use cantilevered bimorph piezo-actuators (reeds) supporting vertical pins at their free end. Upon

  11. WestSolarGroundMount City of Phoenix/ASU West

    E-Print Network [OSTI]

    Shumway, John

    · Credit Union · Information Center · Parking Services Verde Dining Pavilion VRDE 3D Casa de Oro CDOR 3D Sun Devil Fitness Complex SDFCW 3D N S W E updated 10.2012 Map not to scale Map Legend Valley Metro Stop ASU Building ParkingArea Intercampus Shuttle A B C D E F G H 1 2 3 4 5 6 7 ASU Layered Map *The

  12. WestSolarGroundMount City of Phoenix/ASU West

    E-Print Network [OSTI]

    .O.D. Market (Provisions on Demand) Verde Dining Pavilion VRDE 3D Casa de Oro CDOR 3D Sun Devil Fitness Complex SDFCW 3D N S W E updated 07.2013 Map not to scale Map Legend Valley Metro Stop ASU Building ParkingArea Intercampus Shuttle A B C D E F G H 1 2 3 4 5 6 7 ASU Layered Map *The layer view option is only available

  13. Low Altitude Wind Simulation Over Mount Saint Helens Using NASA SRTM Digital Terrain Model

    E-Print Network [OSTI]

    Alberta, University of

    . Using a new radar sweep- ing technique most of the Earth's surfaces was digitized in 3D in approximately Medellin, Colombia Edmonton, Alberta, Canada T6J 2E8 Abstract On February 11, 2000, the Shuttle Radar Topography Mis- sion (SRTM) was launched into space as part of one of the payload of the Shuttle Endeavor

  14. A 40KW ROOF MOUNTED PV THERMAL CONCENTRATOR SYSTEM J.F.H. Smeltink1

    E-Print Network [OSTI]

    3 Centre for Sustainable Energy Systems, Australian National University, Canberra, A.C.T. 0200, Australia email: 1 John.Smeltink@anu.edu.au, 2 Andrew.Blakers@anu.edu.au, 3 Joe.Coventry@anu.edu.au ABSTRACT: The Australian National University, Centre for Sustainable Energy Systems (ANU-CSES) has developed a photovoltaic

  15. Head-mounted and Multi-surface Displays Support Emergency Medical

    E-Print Network [OSTI]

    Klemmer, Scott

    , emergency environments with high demands on cognition and communication [11]. Operating rooms and hospital such as putting in central lines to improving crisis response in trained medical teams [6]. Information technology with their own culture and norms. Medical training also emphasizes knowledge retention and educational practices

  16. Spark-plug-mounted fiber optic sensor for measuring in-cylinder pressure in engines 

    E-Print Network [OSTI]

    Bae, Taehan

    2001-01-01T23:59:59.000Z

    , with an optoelectronic signal conditioning unit containing a chirped distributed feedback laser used to interrogate the sensor. The response of the fiber sensor was compared with that of a piezoelectric pressure sensor used as a reference transducer. Tests were carried...

  17. He-CO? Systematics in groundwaters at Mount Lassen Volcano , Northern Califronia

    E-Print Network [OSTI]

    Franz, Brian Paul

    2012-01-01T23:59:59.000Z

    of  mantle-­?derived  CO 2  and  He  from  springs  in  and  Rose,  T.  P.  (1999).  CO 2  degassing  in  the  and  carbonate  derived  CO 2 .   Then  we  combine  our  

  18. A method of mounting multiple otoliths for beam-based microchemical analyses

    E-Print Network [OSTI]

    Donohoe, Christopher J.; Zimmerman, Christian E.

    2010-01-01T23:59:59.000Z

    3 h of instrument time. On the micro-PIXE instrument at theto several days. The Guelph micro- PIXE instrument can alsoCampbell JL (2005) Use of micro-PIXE to investigate otolith

  19. `Seeds of Time' documentary film. Free Public Screening at WSU Mount Vernon

    E-Print Network [OSTI]

    Collins, Gary S.

    , and the accelerating effects of climate change are already affecting farmers globally," according to the film's press dawned on me that agriculture was going to face a gigantic challenge with climate change from Rome to Russia -- and eventually a remote island under the Arctic Circle ­ to help protect

  20. Wave Interactions with Arrays of Bottom-Mounted Circular Cylinders: Investigation of Optical and Acoustical Analogies

    E-Print Network [OSTI]

    Baquet, Aldric

    2010-10-12T23:59:59.000Z

    Wave scattering by arrays of cylinders has received special attention by many authors and analytical solutions have been derived. The investigation of optical and acoustical analogies to the problem of interaction of water waves with rigid...

  1. Spark-plug-mounted fiber optic sensor for measuring in-cylinder pressure in engines

    E-Print Network [OSTI]

    Bae, Taehan

    2001-01-01T23:59:59.000Z

    A new design for an in-cylinder fiber Fabry-Perot interferometer (FFPI) pressure sensor suitable for automotive engines has been investigated experimentally. The FFPI sensor consists of a single mode fiber containing two internal mirrors which form...

  2. An Experimental Evaluation of the Time Response of a Duct-Mounted Relative Humidity Sensors 

    E-Print Network [OSTI]

    Joshi, S.N.; Pate, M.B.; Nelson, R.M.; House, J.H.; Klaassen, C.J.

    2007-01-01T23:59:59.000Z

    This work is aimed towards the development of an artificially intelligent search algorithm used in conjunction with an Auto Associative Neural Network (AANN) to help locate and reconstruct faulty sensor inputs in control systems. The AANN can...

  3. Wing Mounted Ice Penetrating Radar Array for a Medium Altitude Long Endurance Remote Aircraft

    E-Print Network [OSTI]

    Grorud, Dustin

    2012-08-31T23:59:59.000Z

    ................................................................................... 46 Table 21: Curvature Spar Critical Margins ................................................................................ 46 Table 22: Lower Skin Ply Drops from Pad Up...

  4. he town of Herculaneum, lying at the foot of Mount Vesuvius on a cliff over-

    E-Print Network [OSTI]

    Jellinek, Mark

    advanced as a deflating current with low momentum until it reached the 20-metre cliff drop, when its basal, denser component emplaced abruptly on the beach, halted probably by hydraulic-jump effects, bursting. Some of the skeletons have articulated fractures, as seen in incinerated bodies3,4 , and the inner

  5. Retrofit precipitators mounted on $28-million deck structure constructed over highway. [Ohio Edison Co. , Sammis station

    SciTech Connect (OSTI)

    Kudich, R.L.; Kirchner, P.N.

    1983-04-01T23:59:59.000Z

    Space problems resulted in a 900-foot concrete deck to hold retrofitted precipitators that collect particulates from the Ohio Edison's largest power station. Because the deck spans a state highway, a tight construction schedule was met using a bonus/penalty agreement. Design considerations included an open construction and riverbank work. 5 figures. (DCK)

  6. A Rollator-Mounted Wayfinding System for the Elderly: Proof-of-Concept Design

    E-Print Network [OSTI]

    Kulyukin, Vladimir

    demographic trends in the U.S. signify a demographic shift from a population where most people are relatively in their sensory-motor abilities. Surveys show that a great number of U.S. residents would like to maintain walker was a self-powered walker with an intuitive haptic interface. A software control system enabled

  7. DESIGN AND DEVELOPMENT OF COST EFFECTIVE SURFACE MOUNTED WATER TURBINES FOR RURAL ELECTRICITY PRODUCTION

    E-Print Network [OSTI]

    Sóbester, András

    for further hydro development. Optimization of existing recourses for power harnessing has made application/low head hydro power generation. This project intends to design and develop cost effective design of engineered low head hydro turbines capable of utilizing 2-10 meter of water head and power output 2 to 15 k

  8. Spatial and temporal variability of the stratospheric aerosol cloud produced by the 1991 Mount Pinatubo eruption

    E-Print Network [OSTI]

    Robock, Alan

    Experiment (SAGE) II aerosol extinction profiles and aerosol backscatter measured by five lidars, both lidar backscatter profiles at 0.532 mm or 0.694 mm wavelengths to the SAGE II extinction wavelengths a tremendous aerosol load into the stratosphere and produced large perturbations to the climate system

  9. -News Home Help EU again warns could mount nuclear project without Japan

    E-Print Network [OSTI]

    revealed. news web sites The European Commission ( - ) is set to propose that negotiating strategy next the International Thermonuclear Experimental Reactor (ITER). news web sites Talks in Vienna on Tuesday made some support the Japanese bid -- and Russia and China, which back the EU bid. news web sites Ambassadors from

  10. Control of Surface Mounted Permanent Magnet Motors with Special Application to Fractional-Slot Concentrated Windings

    SciTech Connect (OSTI)

    Lawler, J.S.

    2005-12-21T23:59:59.000Z

    It is well known that the ability of the permanent magnet synchronous machine (PMSM) to operate over a wide constant power speed range (CPSR) is dependent upon the machine inductance [1,2,3,4,5]. Early approaches for extending CPSR operation included adding supplementary inductance in series with the motor [1] and the use of anti-parallel thyristor pairs in series with the motor-phase windings [5]. The increased inductance method is compatible with a voltage-source inverter (VSI) controlled by pulse-width modulation (PWM) which is called the conventional phase advance (CPA) method. The thyristor method has been called the dual mode inverter control (DMIC). Neither of these techniques has met with wide acceptance since they both add cost to the drive system and have not been shown to have an attractive cost/benefit ratio. Recently a method has been developed to use fractional-slot concentrated windings to significantly increase the machine inductance [6]. This latest approach has the potential to make the PMSM compatible with CPA without supplemental external inductance. If the performance of such drive is acceptable, then the method may make the PMSM an attractive option for traction applications requiring a wide CPSR. A 30 pole, 6 kW, 6000 maximum revolutions per minute (rpm) prototype of the fractional-slot PMSM design has been developed [7]. This machine has significantly more inductance than is typical of regular PMSMs. The prototype is to be delivered in late 2005 to the Oak Ridge National Laboratory (ORNL) for testing and development of a suitable controller. In advance of the test/control development effort, ORNL has used the PMSM models developed over a number of previous studies to study the steady-state performance of high-inductance PMSM machines with a view towards control issues. The detailed steady-state model developed includes all motor and inverter-loss mechanisms and will be useful in assessing the performance of the dynamic controller to be developed in future work. This report documents the results of this preliminary investigation.

  11. VERTICALAND HORIZONTAL PARALLEL MOUNTING OF MICRO COMPONENTS ON A SUBSTRATE WITH HIGH SURFACE COVERAGE

    E-Print Network [OSTI]

    parts with dimensions of 790µm�790µm�330µm are used for proof-of-concept demonstrations. Each part has of components, even with same dimensions; (6) high surface coverage on a substrate achieved by multi plate Flat plate Water droplets Spacer 1 Spacer 2 Part (a) (b) (c) (d) (e) (f) Flipping over Adhesive

  12. V-227: VMware Workstation and Player vmware-mount Command Flaw Lets Local

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group current C3EDepartment ofPrivilegesUnauthorized Access | Department

  13. Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project Scoping

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group current C3EDepartmentDepartment(GATE) |Departmentand Feasibility |

  14. Casa de Oro-Mount Helix, California: Energy Resources | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:EzfeedflagBiomassSustainableCSL GasPermitsGreenCarrizoCarteretGrande, Arizona:

  15. HERO PRESENTS A DAY HIKE AT MOUNT RAINIER ON PARADISE TRAILS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.NewofGeothermal HeatonHEP/NERSC/ASCR Requirementspecu-

  16. The Cummins Rocky Mount Engine Plant Case Study | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergy Solar Decathlon2001 Power PlantAPRILThe Chief

  17. Vlf Electromagnetic Investigations Of The Crater And Central Dome Of Mount

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTri Global EnergyUtility RateVirginia/Wind ResourcesInformationVitexSt

  18. A Prehistoric Lahar-Dammed Lake And Eruption Of Mount Pinatubo Described In

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTriWildcat 1 WindtheEnergy InformationOf TheLtd APWR Jump to:A

  19. A Structural Model Guide For Geothermal Exploration In Ancestral Mount Bao,

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTriWildcat 1 WindtheEnergy InformationOfand RangeOpenOfBeyond

  20. Hydrothermal Circulation At Mount St Helens Determined By Self-Potential

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdfGetecGtel JumpCounty, Texas: EnergyHy9Moat of Long Valley Caldera | Open

  1. Pattern Of Shallow Ground Water Flow At Mount Princeton Hot Springs,

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer PlantMunhall,Missouri:EnergyOssian,Parle Biscuits Pvt LtdPatriot Renewables LLCColorado,

  2. Pattern of shallow ground water flow at Mount Princeton Hot Springs,

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer PlantMunhall,Missouri:EnergyOssian,Parle Biscuits Pvt LtdPatriot Renewables

  3. NedPower Mount Storm II Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRoseConcerns Jump to: navigation,Nebraska/Wind Resources/Full

  4. V-227: VMware Workstation and Player vmware-mount Command Flaw Lets Local

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: SinceDevelopment | Department of EnergyEnergy 94:Vulnerabilities |UsersUsers Gain Root

  5. Mount Princeton Hot Springs Pool & Spa Low Temperature Geothermal Facility

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill, California:Morse,WaveLebanon,York:Open Energy|

  6. Near-Surface imaging of a hydrogeothermal system at Mount Princeton,

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer PlantMunhall, Pennsylvania: EnergyEnergy InformationNaturaSystems | Open EnergyColorado

  7. Ground-Based and Airborne (PMS 2-D Probe Canister-Mounted) 183 GHz Water

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.NewofGeothermal Heaton Armed ServicesGround-Based MicrowaveVapor

  8. Habdank PV Montagesysteme GmbH Co KG Habdank PV Mounting Systems | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating AGeothermal/ExplorationGoodsGuangzhou,GuizhouGuyana: EnergyHEROHOMEeHREnergy

  9. Evolution Of Hydrothermal Waters At Mount St Helens, Washington, Usa | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualPropertyd8c-a9ae-f8521cbb8489 NoEurope BV Jump to: navigation, searchClean Energy Place:Energy

  10. Mount Health Centre 2010. The Cartographic Section, Dept. of Geography, UWO /#55-10/pmc/April 2010

    E-Print Network [OSTI]

    Lennard, William N.

    Centre Thames Hall Ivey Business School Music Talbot College Middlesex College Lawrence National Centre and other campus maps visit geography.uwo.ca/campusmaps/ Barrier-free parking is available in all lots

  11. Quaternary Science Reviews 27 (2008) 769780 Cold and wet Last Glacial Maximum on Mount Sandiras, SW Turkey,

    E-Print Network [OSTI]

    Zreda, Marek

    , SW Turkey, inferred from cosmogenic dating and glacier modeling Mehmet Akif Sarikayaa,Ã?, Marek Zredaa, Turkey Received 3 July 2007; received in revised form 18 December 2007; accepted 3 January 2008 Abstract), the southwestern most previously glaciated mountain in Turkey. Valleys on the north side of the mountain were

  12. Wideband Metal Mount UHF RFID Tag K. V. S. Rao, Sander F. Lam, and Pavel V. Nikitin*

    E-Print Network [OSTI]

    Hannaford, Blake

    substrate and placed on top or wrapped around the piece of polycarbonate plastic with bottom layer of conductive material, slightly longer than the dielectric itself, as shown in Figure 3. Figure 3. Cross

  13. 2011 Quantum Control of Light & Matter Gordon Research Conference (July 31-August 5, 2011, Mount Holyoke College, South Hadley, MA)

    SciTech Connect (OSTI)

    Thomas Weinacht

    2011-08-05T23:59:59.000Z

    Quantum control of light and matter is the quest to steer a physical process to a desirable outcome, employing constructive and destructive interference. Three basic questions address feasibility of quantum control: (1) The problem of controllability, does a control field exist for a preset initial and target state; (2) Synthesis, constructively finding the field that leads to the target; and (3) Optimal Control Theory - optimizing the field that carries out this task. These continue to be the fundamental theoretical questions to be addressed in the conference. How to realize control fields in the laboratory is an ongoing challenge. This task is very diverse viewing the emergence of control scenarios ranging from attoseconds to microseconds. How do the experimental observations reflect on the theoretical framework? The typical arena of quantum control is an open environment where much of the control is indirect. How are control scenarios realized in dissipative open systems? Can new control opportunities emerge? Can one null decoherence effects? An ideal setting for control is ultracold matter. The initial and final state can be defined more precisely. Coherent control unifies many fields of physical science. A lesson learned in one field can reflect on another. Currently quantum information processing has emerged as a primary target of control where the key issue is controlling quantum gate operation. Modern nonlinear spectroscopy has emerged as another primary field. The challenge is to unravel the dynamics of molecular systems undergoing strong interactions with the environment. Quantum optics where non-classical fields are to be generated and employed. Finally, coherent control is the basis for quantum engineering. These issues will be under the limelight of the Gordon conference on Quantum Control of Light and Matter.

  14. An elastic mounting system for a wing providing continuously non-linear responses in pitch and plunge

    E-Print Network [OSTI]

    Barnett, Walter Joseph

    1996-01-01T23:59:59.000Z

    the other wire is winding onto the cam. The approach taken here is to specify, a priori, the shape of the portion of the cam onto which the wires are wrapped when no moment is applied to the system. This approach allows the moment for the unwinding wire... to allow for rotation about a central point. A wire, including an extension' spring, is attached to a point, B, on the cam and is anchored to a fixed point, A. The wire contacts the cam at a point, P, which is tangent to the straight line drawn from A...

  15. Gas Production From a Cold, Stratigraphically Bounded Hydrate Deposit at the Mount Elbert Site, North Slope, Alaska

    SciTech Connect (OSTI)

    Moridis, G.J.; Silpngarmlert, S.; Reagan, M. T.; Collett, T.S.; Zhang, K.

    2009-09-01T23:59:59.000Z

    As part of an effort to identify suitable targets for a planned long-term field test, we investigate by means of numerical simulation the gas production potential from unit D, a stratigraphically bounded (Class 3) permafrost-associated hydrate occurrence penetrated in the ount Elbert well on North Slope, Alaska. This shallow, low-pressure deposit has high porosities, high intrinsic permeabilities and high hydrate saturations. It has a low temperature because of its proximity to the overlying permafrost. The simulation results indicate that vertical ells operating at a constant bottomhole pressure would produce at very low rates for a very long period. Horizontal wells increase gas production by almost two orders of magnitude, but production remains low. Sensitivity analysis indicates that the initial deposit temperature is y the far the most important factor determining production performance (and the most effective criterion for target selection) because it controls the sensible heat available to fuel dissociation.

  16. Gas Production From a Cold, Stratigraphically Bounded Hydrate Deposit at the Mount Elbert Site, North Slope, Alaska

    E-Print Network [OSTI]

    Moridis, G.J.

    2010-01-01T23:59:59.000Z

    of P, T, and gas and hydrate phase saturations (S G and SJNOC/GSC Mallik 2L-38 Gas Hydrate Research-Well Sediments,interrelations relative to gas hydrates within the North

  17. 2012 SINGLE MOLECULE APPROACHES TO BIOLOGY GORDON RESEARCH CONFERENCE (JULY 15-20, 2012 - MOUNT SNOW RESORT, WEST DOVER VT)

    SciTech Connect (OSTI)

    Fernandez, Julio [Columbia University

    2012-04-20T23:59:59.000Z

    Single molecule techniques are rapidly occupying a central role in biological research at all levels. This transition was made possible by the availability and dissemination of robust techniques that use fluorescence and force probes to track the conformation of molecules one at a time, in vitro as well as in live cells. Single-molecule approaches have changed the way many biological problems are studied. These novel techniques provide previously unobtainable data on fundamental biochemical processes that are essential for all forms of life. The ability of single-molecule approaches to avoid ensemble averaging and to capture transient intermediates and heterogeneous behavior renders them particularly powerful in elucidating mechanisms of the molecular systems that underpin the functioning of living cells. Hence, our conference seeks to disseminate the implementation and use of single molecule techniques in the pursuit of new biological knowledge. Topics covered include: Molecular Motors on the Move; Origin And Fate Of Proteins; Physical Principles Of Life; Molecules and Super-resolution Microscopy; Nanoswitches In Action; Active Motion Or Random Diffusion?; Building Blocks Of Living Cells; From Molecular Mechanics To Physiology; Tug-of-war: Force Spectroscopy Of Single Proteins.

  18. Mechanical modeling and InSAR measurements of Mount Sedom uplift, Dead Sea basin: Implications for effective

    E-Print Network [OSTI]

    Lyakhovsky, Vladimir

    -dimensional flow of Newtonian viscous fluid (salt) in a vertical channel that has been driven by the load viscous fluid may be more suitable than that of Newtonian viscous fluid for the Sedom rock salt at high of fuel or waste in engineering cavities. Hence constraining the properties of rock salt mass

  19. Petrologic and petrophysical evaluation of the Dallas Center Structure, Iowa, for compressed air energy storage in the Mount Simon Sandstone.

    SciTech Connect (OSTI)

    Heath, Jason E.; Bauer, Stephen J.; Broome, Scott Thomas; Dewers, Thomas A.; Rodriguez, Mark Andrew

    2013-03-01T23:59:59.000Z

    The Iowa Stored Energy Plant Agency selected a geologic structure at Dallas Center, Iowa, for evaluation of subsurface compressed air energy storage. The site was rejected due to lower-than-expected and heterogeneous permeability of the target reservoir, lower-than-desired porosity, and small reservoir volume. In an initial feasibility study, permeability and porosity distributions of flow units for the nearby Redfield gas storage field were applied as analogue values for numerical modeling of the Dallas Center Structure. These reservoir data, coupled with an optimistic reservoir volume, produced favorable results. However, it was determined that the Dallas Center Structure cannot be simplified to four zones of high, uniform permeabilities. Updated modeling using field and core data for the site provided unfavorable results for air fill-up. This report presents Sandia National Laboratories' petrologic and petrophysical analysis of the Dallas Center Structure that aids in understanding why the site was not suitable for gas storage.

  20. Determination of gene expression patterns using high-throughput RNA in situ hybridizaion to whole-mount Drosophila embryos

    E-Print Network [OSTI]

    Weiszmann, R.

    2010-01-01T23:59:59.000Z

    vortex for 15 s to mix and centrifuge at 3200 X G for 1 min.temperature for 10 min. 46. Centrifuge at 4000 rpm (3200 Xat maximum speed for 25 s and centrifuge at 3200 X G for one

  1. Design of a high angle of attack robotic sting mount for tests in a low speed wind tunnel

    E-Print Network [OSTI]

    Kubler, Tommy Jack

    1989-01-01T23:59:59.000Z

    Page INTRODUCTION, . DESIGN DEVELOPMENT . . Tunnel Environment Preliminary Concepts Concept Development . . Preliminary Sizing . Aerodynamic Load Estimation Strut Sizing Wear Pad Design Fasteners . Drive Mechanism Drive Screws Motor... of TAMU LSWT small Langley sting. 20 15 Strut casing spacial restrictions. 21 16 Lower strut casing-to-casing clearance. 22 17 Simplified aircraft shape 18 Oblique view of front strut extension pivot joint. 19 Typical wear pad design 29 20 General...

  2. Real-Time C-Band Radar Observations of 1992 Eruption Clouds from Crater Peak, Mount Spurr Volcano, Alaska

    E-Print Network [OSTI]

    Rose, William I.

    Survey (USGS), and the Federal Aviation Administration (FAA) at Anchorage provides for the exchange of the eruptions has had a considerable impact on commercial aviation in south- central Alaska, particularly of measuring and tracking ash clouds, in order to advise the aviation community about how to avoid ash clouds

  3. A validation of ground penetrating radar for reconstructing the internal structure of a rock glacier: Mount Mestas, Colorado, USA

    E-Print Network [OSTI]

    Jorgensen, William Revis

    2009-05-15T23:59:59.000Z

    Rock glaciers are dynamic landforms and, as such, exhibit interesting and welldeveloped structural features, which translate to surface morphology in the form of ridges and furrows. These distinguishing features have led researchers to study...

  4. An Economic Analysis of the Self Commitment of Thermal Units Simon Ede, Ray Zimmerman, Timothy Mount, Robert Thomas, William Schulze

    E-Print Network [OSTI]

    @cornell.edu, rjt1@cornell.edu, wds3@cornell.edu Abstract Given the load profile of an electricity market was to minimize total operating costs such that total generation was equal to total load. This is shown below

  5. Field Test Results of Using a Nacelle-Mounted Lidar for Improving Wind Energy Capture by Reducing Yaw Misalignment (Presentation)

    SciTech Connect (OSTI)

    Fleming, P.; Scholbrock, A.; Wright, A.

    2014-11-01T23:59:59.000Z

    Presented at the Nordic Wind Power Conference on November 5, 2014. This presentation describes field-test campaigns performed at the National Wind Technology Center in which lidar technology was used to improve the yaw alignment of the Controls Advanced Research Turbine (CART) 2 and CART3 wind turbines. The campaigns demonstrated that whether by learning a correction function to the nacelle vane, or by controlling yaw directly with the lidar signal, a significant improvement in power capture was demonstrated.

  6. IEEE TRANSACTIONS ON ROBOTICS AND AUTOMATION, VOL. 19, NO. 5, OCTOBER 2003 893 Bone-Mounted Miniature Robot for Surgical

    E-Print Network [OSTI]

    Joskowicz, Leo

    Abstract--This paper presents a new approach to robot-assisted spine and trauma surgery in which is designed to operate in a semiactive mode to precisely po- sition and orient a drill or a needle in various placement; and 2) drill guiding for distal locking screws in intramedullary nailing. In both cases, a tool

  7. Gas Production From a Cold, Stratigraphically Bounded Hydrate Deposit at the Mount Elbert Site, North Slope, Alaska

    E-Print Network [OSTI]

    Moridis, G.J.

    2010-01-01T23:59:59.000Z

    of P, T, and gas and hydrate phase saturations (S G and SInternational Conference on Gas Hydrates, Vancouver, Britishinterrelations relative to gas hydrates within the North

  8. ,"Plant","Primary Energy Source","Operating Company","Net Summer...

    U.S. Energy Information Administration (EIA) Indexed Site

    Station","Coal","Wisconsin Electric Power Co",1268 2,"Point Beach Nuclear Plant","Nuclear","NextEra Energy Point Beach LLC",1197 3,"Pleasant Prairie","Coal","Wisconsin...

  9. In the field. Pilot project uses innovative process to capture CO{sub 2} from flue gas

    SciTech Connect (OSTI)

    NONE

    2008-04-01T23:59:59.000Z

    A pilot project at We Energies' Pleasant Prairie Power Plant uses chilled ammonia to capture CO{sub 2} from flue gas. 3 photos.

  10. Data:51dc30be-aed4-4d1d-a720-e557ec87f6b9 | Open Energy Information

    Open Energy Info (EERE)

    served from overhead secondary (Restricted to Pleasant Hall Village - residents share the cost) - estimated power usage - 15 kWhmo. Source or reference: http:...

  11. Microsoft Word - Cover Page - Exhibit 9

    Broader source: Energy.gov (indexed) [DOE]

    Dustin Historic Site Merrymeeting Marsh Dam - Alton Pleasant Lake Boat Launch Facility Lambert Park Boat Launch Facility Suncook River - Access Merrymeeting Lake Dam North Island...

  12. 2010 MICROBIAL STRESS RESPONSE GORDON RESEARCH CONFERENCE, JULY 18-23, 2010

    SciTech Connect (OSTI)

    Sarah Ades

    2011-07-23T23:59:59.000Z

    The 2010 Gordon Research Conference on Microbial Stress Responses provides an open and exciting forum for the exchange of scientific discoveries on the remarkable mechanisms used by microbes to survive in nearly every niche on the planet. Understanding these stress responses is critical for our ability to control microbial survival, whether in the context of biotechnology, ecology, or pathogenesis. From its inception in 1994, this conference has traditionally employed a very broad definition of stress in microbial systems. Sessions will cover the major steps of stress responses from signal sensing to transcriptional regulation to the effectors that mediate responses. A wide range of stresses will be represented. Some examples include (but are not limited to) oxidative stress, protein quality control, antibiotic-induced stress and survival, envelope stress, DNA damage, and nutritional stress. The 2010 meeting will also focus on the role of stress responses in microbial communities, applied and environmental microbiology, and microbial development. This conference brings together researchers from both the biological and physical sciences investigating stress responses in medically- and environmentally relevant microbes, as well as model organisms, using cutting-edge techniques. Computational, systems-level, and biophysical approaches to exploring stress responsive circuits will be integrated throughout the sessions alongside the more traditional molecular, physiological, and genetic approaches. The broad range of excellent speakers and topics, together with the intimate and pleasant setting at Mount Holyoke College, provide a fertile ground for the exchange of new ideas and approaches.

  13. Post-fire Tree Establishment Patterns at the Subalpine Forest-Alpine Tundra Ecotone: A Case Study in Mount Rainier National Park

    E-Print Network [OSTI]

    Stueve, Kirk M.

    2010-10-12T23:59:59.000Z

    with abiotic and biotic variables in a GIS, and analyzed the correlations with standard logistic regression and logistic regression in the hierarchical partitioning framework at multiple spatial resolutions. A biotic factor (proximity to previously existing...

  14. A Volcano Rekindled: The Renewed Eruption of Mount St. Helens, 20042006 Edited by David R. Sherrod, William E. Scott, and Peter H. Stauffer

    E-Print Network [OSTI]

    not deployed specifically for photogrammetric purposes. Quantitative analysis of oblique terrestrial imagery photographs sufficient to make quantitative (photogrammetric) measurements of static features or dynamic scientists to unnecessary risk and to pro- vide ancillary information on conditions in the crater (such

  15. Forest Certification Standards From Around The World Weigh In As Global Pressure Mounts for US Green Building Council to Accept Multiple

    E-Print Network [OSTI]

    Green Building Council to Accept Multiple Forest Certification Programs Thursday, 22 July 2010 Forest recognition to one forest certification brand, green building standards may help drive demand for these brands told USGBC that in order to increase the use of wood in buildings, all credible certification systems

  16. Locational Pricing and Scheduling for an Integrated Energy-Reserve Market Jie Chen* James S. Thorp* Robert J. Thomas* Timothy D. Mount#

    E-Print Network [OSTI]

    categories: 1) Regulation for Automatic Generation Control (AGC for load following), 2) 10-minute spinning

  17. Nuclear Instruments and Methods in Physics Research A 527 (2004) 166170 RatCAP: a small, head-mounted PET tomograph for imaging

    E-Print Network [OSTI]

    electronics, as well as studies with live animals to evaluate their behavior when using the device. of an awake rat. This device will permit neurophysiological studies to be carried out on small animals without of the animal. In order to minimize the weight of the ring, and to keep all of the front end readout electronics

  18. Mounting a thermocouple of type E onto a Cu single crystal for use in a magnetically sensitive environment below 77?K

    SciTech Connect (OSTI)

    Potzuweit, Alexander; Schaffner, Anuschka; Jänsch, Heinz Julius, E-mail: heinz.jaensch@physik.uni-marburg.de [Fachbereich Physik, Philipps-Universität Marburg, Renthof 5, 35032 Marburg (Germany)

    2014-09-01T23:59:59.000Z

    Type E thermocouples show magnetic effects at liquid nitrogen temperature and below. This may cause trouble in experiments that are sensitive to magnetic stray fields like nuclear magnetic resonance, photoemission or high resolution electron energy loss spectroscopy. Here, a solution for the temperature measurement of a single crystal is presented. The authors weld a copper rod onto the back side of the single crystal, thereby relocating the sensitive sample from the thermocouple attachment position. They show that it is possible to measure the crystal temperature at the end of the rod while significantly reducing the ferromagnetic influence due to the increased distance.

  19. Sequence-Stratigraphic Analysis of the Rollins and the Cozzette Sandstone Members, the Upper Cretaceous Mount Garfield Formation of the Piceance Basin, Colorado.

    E-Print Network [OSTI]

    Ouaichouche, Fatma Zahra

    2011-08-31T23:59:59.000Z

    at the top. Both siltstone and mudstone are locally bioturbated. Siltstone beds (~20 cm) are sharp-based, light brown to gray in color, and are interbeded with mudstone beds. Coal with siltstone Trough-cross bedding Laminae/flaser beddin g/burrows 10 m10... it occurs at the top of the Rollins Sandstone Member. It is laterally continuous, distinctively white colored, and 22 capped with a coal bed (Figure 9). This unit is composed of six subunits arranged in an upward-coarsening trend and is described...

  20. PowerWeb Testing of Various Auction Clearing Mechanisms for Electricity Robert J. Thomas, Fellow Timothy D. Mount , Ray D. Zimmerman, Member

    E-Print Network [OSTI]

    a framework for testing the efficacy of various supply-side auctions including one with price-responsive load shown an ability of price responsive load to mitigate high volatility and average price from independently owned generation facilities. Based on a forecasted demand profile for the next day

  1. IEEE Transactions on Energy Conversion, Vol. 14, No. 4, December 1999 1043 OptimalCurrent Control Strategies for Surface-MountedPermanent-Magnet

    E-Print Network [OSTI]

    Chapman, Patrick

    . There has been considerable work in the area of choosing optimal current excitation of PMSM drives minimizing the rms stator Permanent-magnet synchronous machine (PMSM) drives current was set forth in [6 that In designing PMSM drives, two factors Of interest are would he difficult to implement in a real-time control

  2. Biologically Inspired Photocatalytically Active Membranes for Water Treatment

    E-Print Network [OSTI]

    Kinsinger, Nichola

    2013-01-01T23:59:59.000Z

    2 -polymer composite samples were mounted with conductive2 -polymer composite samples were mounted with conductive2 -polymer composite samples were mounted with conductive

  3. reaches OutActing, Teaching and Engaging the Community

    E-Print Network [OSTI]

    Alterovitz, Ron

    . Martin Sprock III `87, Charlotte, NC · Emily Pleasants Sternberg '88, '94 MBA, Greenwich, CT · Eric P by political science faculty member Donna LeFebvre, went on a Burch Field Research Seminar to study

  4. A Soft Expert System for the Creative Exploration of First Principles of Crystal-Laser Design

    E-Print Network [OSTI]

    Trajkovic, Ljiljana

    Science, Central Michigan University, Mt. Pleasant, MI USA murthy@cps.cmich.edu. School of Engineering's Incompleteness Theorem [2] in that it shows that were it not for essential incompleteness, then a universal

  5. DISCOVER-AQ Outlook for Monday, July 18, 2011 Good flying conditions are forecasted for Monday, though we should keep an eye on possible late

    E-Print Network [OSTI]

    Humidity Pleasant Weak Front Dying 50% by late afternoon Tuesday Wind Shift #12;Tuesday Humidity >50% Clouds Wind Shift Wind Shift . But timing is difficult. NAM 200 mb winds (knots)/ heights (dm) #12;Tuesday 8 am: Upper level trough moves

  6. 4-H Happenings Welcome 2011--hope its a happy , healthy

    E-Print Network [OSTI]

    Goodman, Robert M.

    tubing, broom ball, cards, games and meeting new friends. County Public Presentation Night is almost here, the spring would not be so pleasant: if we did not sometimes taste adversi- ty, prosperity would not be so

  7. FACULTY CLUB, I IT KANPUR Dear Colleague,

    E-Print Network [OSTI]

    Srivastava, Kumar Vaibhav

    Club, IIT Kanpur, we welcome you on the campus and wish you a very prosperous and pleasant stay a Fully Equipped Gym, a TV room and music system and some indoor game facilities such as Table Tennis

  8. This article appeared in a journal published by Elsevier. The attached copy is furnished to the author for internal non-commercial research

    E-Print Network [OSTI]

    Hardy, Jeanne

    , University of Massachusetts Amherst, 104 Lederle Graduate Research Tower, 710 North Pleasant Street, Amherst and regulation remains poorly understood. In the recently reported structure of caspase-6, the 60's and 130's

  9. Substrate-Induced Conformational Changes Occur in All Cleaved Forms of Caspase-6

    E-Print Network [OSTI]

    Hardy, Jeanne

    of Massachusetts Amherst, 104 Lederle Graduate Research Tower, 710 North Pleasant Street, Amherst, MA 01003, USA, the molecular basis of caspase-6 function and regulation remains poorly understood. In the recently reported

  10. Allocation of Space and the Costs of Multimodal Transport in Cities

    E-Print Network [OSTI]

    Gonzales, Eric Justin

    2011-01-01T23:59:59.000Z

    overall population density D (ppl/m 2 ) and the average rateeach person makes trips ? (trips/ppl·sec): ? = D?. At thePleasant Hill, California D R ppl = 2,300 km 2 = 0.11 m 2 m

  11. Allocation of Space and the Costs of Multimodal Transport in Cities

    E-Print Network [OSTI]

    Gonzales, Eric Justin

    2011-01-01T23:59:59.000Z

    overall population density D (ppl/m 2 ) and the average rateeach person makes trips ? (trips/ppl·sec): ? = D?. At thePleasant Hill, California D R ppl = 2,300 km m 2 = 0.11 m 2

  12. EXPERIMENTS with PHOTOVOLTAIC CELLS for high school science students

    E-Print Network [OSTI]

    Oregon, University of

    EXPERIMENTS with PHOTOVOLTAIC CELLS for high school science students By Dick Erickson ­ Pleasant Activity ­ Testing Photovoltaic Cells ..........................5 Expected Observations: ........................................................................................................8 II. LAB ACTIVITY - TESTING PHOTOVOLTAIC CELLS ..................................9 BEFORE YOU START

  13. Contractor for geopressured-geothermal sites: Final contract report, Volume 1, fiscal years 1986--1990 (5 years), testing of wells through October 1990

    SciTech Connect (OSTI)

    Not Available

    1992-09-01T23:59:59.000Z

    Field tests and studies were conducted to determine the production behavior of geopressured-geothermal reservoirs and their potential as future energy sources. Results are presented for Gladys McCall Site, Pleasant Bayou Site, and Hulin Site.

  14. Avoiding the Identity: 10606 Thomas Zaslavsky; Stephen M. Gagola, Jr.

    E-Print Network [OSTI]

    Zaslavsky, Thomas

    . Andersen & M. E. Larsen (Denmark),J. C. Binz (Switzerland), P. Bracken, D. Bradley (Canada), E. Braune. Proposed by Yury J. Ionin and Robin R. Lewis, Central Michigan University, Mt. Pleasant, MI. Let a, b

  15. Widgeegoara Commoron Ck

    E-Print Network [OSTI]

    Greenslade, Diana

    Woodenbone Pittsworth Chinchilla Wallaville Tenterfield Wallangarra Goondiwindi Glastonbury Mount Perry

  16. The ins and outs of pleasure: roles and importance of hedonic value

    E-Print Network [OSTI]

    Laane, Kristjan

    2011-02-08T23:59:59.000Z

    delight in mouth-watering palatability relish savour sweet tasteful tasty fun entertainment merriment hedonia hedonics pleasing pleasurable pleasantness pleasant hedonic value hedonic pleasure hedonic reaction reward positive affect... ” (Hare, 1972, p. 88); such a dissociative phenomenon is even more pronounced under modern anaesthesia (C. R. Chapman, 1996). Furthermore, a rare condition exists called Congenital Indifference to Pain, in which the physical sensation of pain is intact...

  17. 2000 2006 City Percentage Point Change

    E-Print Network [OSTI]

    Baskaran, Mark

    .2 5.6 -1.4 -2.7 Monroe 3.2 6.5 3.3 3.2 6.5 - -0.4 Mt. Pleasant 3.5 5.4 1.9 2.9 6.3 -0.9 -1.5 Portage 2 Marquette Midland Monroe Mt. Pleasant Portage Average State Percentage Point Difference Unemployment Rates

  18. Practical tip: Chicago Sky Blue (CSB) stain can be added to the routine potassium hydroxide (KOH) wet-mount to provide a color contrast and facilitate the diagnosis of dermatomycoses

    E-Print Network [OSTI]

    Lim, Christopher Seng-Hong; Lim, Siew-Lin

    2011-01-01T23:59:59.000Z

    albicans . CSB stain shows the blue and pink budding yeastsand stains pink or light blue (Figure 4). More intensePractical tip: Chicago Sky Blue (CSB) stain can be added to

  19. Cleaning Up Mount Everest The Changing Face of Pharmacy Days after24-year-old Army Lt.Robert Leisy, '68, wrote this letter to his parents, he used his body to

    E-Print Network [OSTI]

    Hochberg, Michael

    gERALD BALDASTY, '72, '78 Vice Provost and Dean, UW graduate School KERRY J. COUgHLIN Communications

  20. The NICMOS detectors are mounted in a cryogenically cooled well inside of a dewar filled with solid Nitrogen. The cryogenic vessel contains a sparse matrix of an aluminum "sponge" into

    E-Print Network [OSTI]

    Schneider, Glenn

    internal cooling coils. One hundred and twenty seven layers of multi­layer insulation surround the N 2 in early December. On the ground, except during the System Level Thermal Vacuum Test, the dewar will remain will be opened by the EVA crew (through the "Astronaut interface panel") to permit the Nitrogen to slowly vent

  1. X-ray CT Observations of Methane Hydrate Distribution Changes over Time in a Natural Sediment Core from the BPX-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well

    E-Print Network [OSTI]

    Kneafsey, T.J.

    2012-01-01T23:59:59.000Z

    and Englezos, P. , 2009. Gas hydrate formation in a variable1999. Formation of natural gas hydrates in marine sediments.1. Conceptual model of gas hydrate growth conditioned by

  2. Stop City IntersectionStop # Van Name Arrive Depart Van Stops, Times, & Fees

    E-Print Network [OSTI]

    Mullins, Dyche

    .88Active 7.6DENTAL6:40 CONCORD 59Near Pleasant Hill Bart Station2120.01 CONCORD 12120 7:55 5:05 $195:30 CONCORD 59Near Pleasant Hill Bart Station2120.01 CONCORD 12120 7:55 5:05 $195.12Active 8.05P, LH6:50 DALY, MTZ6:50 ELK GROVE 203LAGUNA & FRANKLIN BLVD.2225.01 ELK GROVE2225 6:15 3:20 $356.40Active 6.4MB

  3. Quasi-optical network analyzers and high-reliability RF MEMS switched capacitors

    E-Print Network [OSTI]

    Grichener, Alexander

    2011-01-01T23:59:59.000Z

    surface mount technology (SMT) on a printed circuit board (surface-mount technology (SMT) devices, including Coilcraftfor their small size. The SMT capacitors have a Q of greater

  4. Reduce Overhead, Implement Energy Efficiency in Water/Wastewater

    E-Print Network [OSTI]

    Cantwell, J. C.

    2007-01-01T23:59:59.000Z

    consumption and reduced cost to industry. Reduced cost is a pleasant benefit when the cost of utility bills comes off the bottom line and if the industry is working on a 5 percent margin the actual value of the savings could be considered to be 20 times its...

  5. Are real numbers real?

    E-Print Network [OSTI]

    Page 1 ... 1993, Leibniz referred to what we call the in?nitesimal calculus as. “the calculus of ... ?nite mind to apprehend God is inherently paradoxical, has now been ..... but I don't believe it!,“ and which happens to have a pleasant melody.

  6. Data Sheet Fujitsu ESPRIMO Q910 Desktop PC Page 1 / 7 www.fujitsu.com/fts/ESPRIMO

    E-Print Network [OSTI]

    Fiebig, Peter

    ® Turbo Boost Technology (clock speed and will vary depending on workload and other variables) Processor business applications 3rd generation Intel® CoreTM processor family Sophisticated system management Simple) and Fujitsu DeskView manageability Flexible operations and easy upgrade of the system Pleasant working

  7. 126 IEEE TRANSACTIONS ON SPEECH AND AUDIO PROCESSING, VOL. 7, NO. 2, MARCH 1999 Single Channel Speech Enhancement Based on

    E-Print Network [OSTI]

    Allen, Jont

    Speech Enhancement Based on Masking Properties of the Human Auditory System Nathalie Virag Abstract--This paper addresses the problem of single channel speech enhancement at very low signal-to-noise ratios (SNR as subjective listening tests, confirm that the enhanced speech is more pleasant to a human listener. Finally

  8. Managing Insect and Mite Pests in Vegetable Gardens

    E-Print Network [OSTI]

    Jackman, John A.

    2008-02-19T23:59:59.000Z

    Growing your own vegetables is a pleasant and satisfying way to enjoy nature and save money. But managing garden pest populations in the vegetable garden isn't always easy. This publication discusses ways to accomplish that goal. 38 pages and 3...

  9. AT YOUR SERVICE Working with Multicultural Customers

    E-Print Network [OSTI]

    Amin, S. Massoud

    of Food, Agricultural and Natural Resource Sciences. NOW AVAILABLE IN SPANISH! #12;But, what if your sta Tourism Center has been culturally adapted and translated. Now available in Spanish. Is your staff in either English or Spanish. Your staff will: · Learn how to establish a pleasant, genuine rapport

  10. Library Access Policy The University welcomes users to its libraries from within the University, from other

    E-Print Network [OSTI]

    Levi, Ran

    Library Access Policy The University welcomes users to its libraries from within the University are in place in all of our libraries to help ensure a safe and pleasant working environment for all visitors and staff and to help protect the Library resources. 1. All users of the Library must carry valid

  11. Product Search Company Search

    E-Print Network [OSTI]

    Abolmaesumi, Purang

    visual connections and a pleasant, bright facility. (All photos: William McElligott) The "Wow Factor systems, as well as a reduction in the shaft/duct sizes. In addition, energy was conserved by operating/min. This long-term energy and fiscally sound approach to fume hoods was not attained at the expense

  12. SHIPBOARD PROCEDURES TO DECREASE LOBSTER MORTALITY

    E-Print Network [OSTI]

    Mar i n e Biologist John Hughes has developed a successful storage method in cooperation with lobstermen Jack Baker and Jack Marley. Mr. Baker is the owner of two stern trawlers, the 'Shanty Queen' and the 'Shanty Girl', and two sea - food restaurants, Baker's Lobster Shanty at Point Pleasant Beach, New Jersey

  13. Extending Sledgehammer with SMT Solvers Jasmin Christian Blanchette1, , Sascha Bhme1, and Lawrence C. Paulson2

    E-Print Network [OSTI]

    Paulson, Lawrence C.

    Extending Sledgehammer with SMT Solvers Jasmin Christian Blanchette1, , Sascha Böhme1, and Lawrence extended Sledgehammer to invoke satisfiability modulo theories (SMT) solvers as well, exploiting its relevance filter and parallel architecture. Isabelle users are now pleasantly surprised by SMT proofs

  14. 2009 Virginia Polytechnic Institute and State University 2901-7020 Virginia Cooperative Extension programs and employment are open to all, regardless of race, color, national origin, sex, religion, age, disability, political beliefs, sexual orientation, o

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    helps protect your investment in your home and makes it a safer, healthier, and more pleasant place, disability, political beliefs, sexual orientation, or marital or family status. An equal opportunity and to learn to control the conditions that lead to mold growth. In order to grow, molds require: · A food

  15. Failure mode analysis for lime/limestone FGD system. Volume III. Plant profiles. Part 1 of 3

    SciTech Connect (OSTI)

    Kenney, S.M.; Rosenberg, H.S.; Nilsson, L.I.O.; Oxley, J.H.

    1984-08-01T23:59:59.000Z

    This volume contains plant profiles for: Petersburg 3; Hawthorn 3, 4; La Cygne 1; Jeffry 1, 2; Lawrence 4, 5; Green River 1-3; Cane Run 4, 5; Mill Creek 1, 3; Paddy's Run 6; Clay Boswell 4; Milton R. Young 2; Pleasants 1, 2; and Colstrip 1, 2. (DLC)

  16. Predation, Enrichment, and Phytoplankton Community Structure Michael Lynch; Joseph Shapiro

    E-Print Network [OSTI]

    Lynch, Michael

    Predation, Enrichment, and Phytoplankton Community Structure Michael Lynch; Joseph Shapiro@jstor.org. http://www.jstor.org Thu Aug 30 11:57:16 2007 #12;Predation, enrichment, and phytoplankton community and enrichment to the Pleasant Pond phytoplankton community was examined through a series of enclosure

  17. Encouraging PV Adoption in New Market-Rate Residential Construction: A Critical Review of Program Experiences to Date

    E-Print Network [OSTI]

    Barbose, Galen; Wiser, Ryan; Bolinger, Mark

    2006-01-01T23:59:59.000Z

    photovoltaics (BIPV), which are subject to fewer aesthetic concerns than traditional, rack-mounted systems,

  18. U.S. Aims for Zero-Energy: Support for PV on New Homes

    E-Print Network [OSTI]

    Barbose, Galen; Wiser, Ryan; Bolinger, Mark

    2006-01-01T23:59:59.000Z

    photovoltaics (BIPV), which are subject to fewer aesthetic concerns than traditional, rack-mounted systems,

  19. (877) 345-4633 Business.ca.gov 1130 K Street, Suite 101, Sacramento, California 95814 EDMUND G. BROWN JR.

    E-Print Network [OSTI]

    , Mounting Systems GmbH--a German-based company and one of the leading enterprises in developing mounting in Germany, and renowned competency in the field of renewable energies, Mounting Systems decided it, the solar industry. Contacts: Kasim Ersoy CEO, Mounting Systems Brook Taylor Deputy Director, Communications

  20. Lab team makes unique contributions to the first bionic eye

    E-Print Network [OSTI]

    by using a miniature camera mounted in eyeglasses that captures images and wirelessly sends the information

  1. NOE LOPEZ-BENITEZ 3205 28th St.

    E-Print Network [OSTI]

    Zhuang, Yu

    communication protocols. May/77-Jun/78 Instrumentation Supervisor, PEMEX, Poza Rica, Ver., Mexico. Mounting

  2. Toward early safety alert endpoints: exploring biomarkers suggestive of microbicide failure.

    E-Print Network [OSTI]

    Creinin, Mitchell David

    2013-01-01T23:59:59.000Z

    and chromogen (Dako, Carpinteria, CA), washed, and mounted.and chromogen (Dako, Carpinteria, CA). Positively stained

  3. Condamine River Meteor Zamia

    E-Print Network [OSTI]

    Greenslade, Diana

    Surbiton Clermont Fairview Mitchell Mt Larcom Mt Morgan Rolleston Peak Vale Monteagle Mount Owen Chinchilla

  4. Post-NEPA environmental investigations at DOE geopressured-geothermal project sites

    SciTech Connect (OSTI)

    Reed, A.W.

    1985-01-01T23:59:59.000Z

    In 1982, the Oak Ridge National Laboratory (ORNL) conducted follow-up environmental reviews of four US Department of Energy (DOE) geopressured-geothermal design well projects: Dow Parcperdue, Sweet Lake, Gladys McCall and Pleasant Bayou. The reviews determined the implementation and effectiveness of monitoring and mitigation commitments made by DOE in National Environmental Policy Act (NEPA) documents prepared for the individual projects. This paper briefly describes post-NEPA environmental investigations at DOE's geopressured-geothermal design well sites and focuses on three environmental problems that were identified and subsequently mitigated by DOE. These were (1) a breech in the brine pit liner and (2) a torn mud pit liner at the Dow Parcperdue well site, and (3) the disposal of potentially hazardous contents of the reserve pit at the Pleasant Bayou well site. The nature of the environmental problems, recommendations for mitigation of each, and remedial actions that were taken are presented.

  5. assess fluvial fan: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    mounting setup was such that fan with uniform blades can be tested. Generally, fans have cut blades on the vehicle due to mounting accessories. We describe a patented design of...

  6. alluvial fan surfaces: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    mounting setup was such that fan with uniform blades can be tested. Generally, fans have cut blades on the vehicle due to mounting accessories. We describe a patented design of...

  7. alluvial fan nye: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    mounting setup was such that fan with uniform blades can be tested. Generally, fans have cut blades on the vehicle due to mounting accessories. We describe a patented design of...

  8. Center for Energy Efficient Design

    High Performance Buildings Database

    Rocky Mount, VA As the first Passivhaus public school in North America, the Center for Energy Efficient Design (CEED) in Rocky Mount, Virginia, is a national model for green school construction. An extension of The Leonard A.

  9. Energy Efficiency and Conservation Block Grant Program

    Broader source: Energy.gov (indexed) [DOE]

    of a 10.56 kW ground-mounted solar photovoltaic at the City of Bowie Radio & TV Museum (Harmel House); 10) installation of a 3.84 kW roof-mounted solar photovoltaic at the...

  10. Levee Decisions and Sustainability for the Sacramento-San Joaquin Delta

    E-Print Network [OSTI]

    Pasternack, Gregory B.

    inflows, and earthquakes (Mount and Twiss, 2005, Jack R. Benjamin and Associates, 2009). For physical in: Linsley et al 1964, Wood 1997, Mount and Twiss, 2005, Moss and Eller 2007). Most commonly, levees

  11. SANDIA REPORT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    modules which are mounted on dual axis trackers are typically mounted in the plane of the tracking face. For maximum solar energy collection, the tracker face is pointed toward the...

  12. A Cable-less Interaction Device for AR and VR Environments H. T. Regenbrechta

    E-Print Network [OSTI]

    Poupyrev, Ivan

    with bright Light Emitting Diodes (LEDs) mounted at each end. Using computer vision techniques, these LEDs of this we have developed the Magic Pen interface, where a real pen with Light Emitting Diodes (LEDs) mounted

  13. A wearable system that learns a kinematic model and finds structure in everyday manipulation by using absolute orientation sensors and a camera

    E-Print Network [OSTI]

    Kemp, Charles C. (Charles Clark), 1972-

    2005-01-01T23:59:59.000Z

    This thesis presents Duo, the first wearable system to autonomously learn a kinematic model of the wearer via body-mounted absolute orientation sensors and a head-mounted camera. With Duo, we demonstrate the significant ...

  14. Direct electron detection in transmission electron microscopy

    E-Print Network [OSTI]

    Jin, Liang

    2009-01-01T23:59:59.000Z

    overlay on the photo showed how the sensor chip was aligned40. Photo of the EM5 carrier board with mounted sensor40. Photo of the EM5 carrier board with mounted sensor chip.

  15. DEVELOPMENT OF THE HIGH-TEMPERATURE, SOLID-STATE, ELECTROMOTIVE FORCE TECHNIQUE TO STUDY THE THERMODYNAMICS OF LEWIS-ACID-BASE TRANSITION METAL ALLOYS

    E-Print Network [OSTI]

    Bullard, Gary Lloyd

    2011-01-01T23:59:59.000Z

    and washer were mounted in epoxy resin (Koldmount, Vernon-steel washer and mount in epoxy resin 240, 320, 400, and 600sufficiently softened the epoxy resin to get the electrode

  16. compression monitor(s) Bernhard Schmidt -FLA-

    E-Print Network [OSTI]

    -leg this port ! #12;#12;spectrometer #12;technicalities diamond window UHV mirror mount (BESSY) #12;technicalities diamond window UHV mirror mount (BESSY) CSR #12;Status & Plans vacuum parts ordered, installation

  17. Importing the US Geographical Survey Data into a Relational DBMS

    E-Print Network [OSTI]

    McBrien, Peter

    # longitude# elevation Figure 1: ER representation of the USGS data · type: e.g. lake, ppl, mount. Note: name of the populated place. · type: e.g. lake, ppl, mount · county: name of county in which

  18. The ecology of furbearers in the Upland Post Oak Region of Eastern Texas

    E-Print Network [OSTI]

    Wood, John Eugene

    1952-01-01T23:59:59.000Z

    prime and unprime pelts . . . 165 38. Ringtail pelts, prime and unprime. 166 39. Ringtail fur mounts showing frayed hair, . . . . . . . . 167 Illustrations (continued) 40. Unprime gray fox hide. ................. . 167 41. Gray fox fur mounts...

  19. Plan for shell + sensor New sensors calibration

    E-Print Network [OSTI]

    Hone, James

    ) Shells arrive Verify dimensions Remove ICRH chamber Build Cu Plas mount Install Cu Plasma Run Cu Plasma Wiki for progress Make HDA mounts VF coil spacer blocks Fix upper OH outer coil GDC chamber heater

  20. 20140428_RMOTC_MAY_SaleItems_Inventory_Final.pages

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    skid mounted * Electrical Supply House (MCC)for Drilling Rig, skid mounted * 2 Steel Pipe tubs containing approx. 110 joints of 4 " drill pipe; 1 ea empty steel pipe...

  1. Evaluating a Master's Degree Program via Distance Education

    E-Print Network [OSTI]

    Lara-Alecio, Rafael; Kemp, Janie; Treviño, Polly; Tong, Fuhui; Castillo, Raymond

    2010-10-22T23:59:59.000Z

    ?s Degree in Bilingual/ESL Education in the nation offered totally via distance ? Served over 20 school districts since 1999 ? Currently delivers instruction to 4 different sites across Texas ? Region VIII ESC, Mt. Pleasant ? The University Center..., The Woodlands ? Blackland Research Center, Temple ? TAMU, College Station Texas A&M University Bilingual Education Programs ? Doctoral Program ? PhD in Educational Psychology with a Specialization in Hispanic Bilingual Education ? Prepares graduates...

  2. Of Black Sheep and White Crows: Is Bilinguals’ Memory for Figurative Meaning Language-Specific

    E-Print Network [OSTI]

    Pritchett, Lena K

    2012-07-11T23:59:59.000Z

    informed that some phrases might not make sense to them (e.g., ?blue smell/??????? ?????,? ?rich parachute/??????? ???????? or ?dirty cough/??????? ???????) and were advised to rate those phrases to the best of their knowledge. For example, despite... the fact that ?dirty cough? is not an actual phrase, it conveys an unpleasant meaning while ?rich parachute? might imply a pleasant connotation, and ?blue smell? may be more neutral. Participants were provided three examples and were encouraged to ask...

  3. Jefferson County State of the Community Report 

    E-Print Network [OSTI]

    Chen, Xi; Lee, Kanghyun; Aldalbahi, Faisal

    2015-01-01T23:59:59.000Z

    restrains for development within the potential wild- fire areas. For instance, Development in moderate or Severe Wildfire Hazard Areas should identify “no build” areas, build- ing construction and design, landscaping/ Defensible Space/fuel management, ac... high school and high certificates. Abundant natural resources Pleasant living environment is benefi- cial for people’s health Mature hazard mitigation and recov- ery plan. The rich Rocky Mountain area with minerals and tourist sites. Mature hazard...

  4. Gulf Coast geopressured-geothermal reservoir simulation: final task report (year 4). Final report, 1 August 1979-31 July 1980

    SciTech Connect (OSTI)

    MacDonald, R.C.; Sepehrnoori, K.; Ohkuma, H.

    1982-10-01T23:59:59.000Z

    The results of the short-term production tests run on the Pleasant Bayou No. 2 well are summarized. These tests were analyzed using conventional pressure test analysis methods. The effects of reservoir heterogeneties onm production behavior and, in particular, permeability distribution and faulting of reservoir sand were studied to determine the sensitivity of recovery to these parameters. A study on the effect of gas buildup around a producing well is reported. (MHR)

  5. Ark-Tex Area Regional Public Transportation Coordination Plan

    E-Print Network [OSTI]

    Ark-Tex Council of Governments

    2006-11-30T23:59:59.000Z

    ? 30 corridor. The transportation network in the Ark-Tex area is managed and operated through two transit providers, a variety of organizations that provide or fund transportation in support of their primary programs (including public entities... and Texarkana proper. 3. Ark-Tex Area Agency on Aging (AAA) ? Senior transportation throughout the service area to meals and other services. 4. Northeast Texas Community College ? Service from Mt. Pleasant to the community college is provided by TRAX...

  6. Personality and the prediction of short-duration emotional reactions

    E-Print Network [OSTI]

    Sheese, Bradley E

    2000-01-01T23:59:59.000Z

    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 7. Study 3: Regression Analyses Predicting Categories of Emotional Response 43 INTRODUCTION There has recently been a considerable amount of research on the associations between personality and affective phenomena (Larsen, 2000). However... (pleasantness vs. unpleasantness) and Arousal are the two independent dimensions that most adequately describe affective experience (Lang, Bradley, 4 Cuthbert, 1990, 1992; Larsen 4 Diener, 1985, 1992; Russell, 1980; Russell, k. Feldman Barrett, 1999; Yik...

  7. Data-Driven Design of a Dexterous Robotic Microsurgery System

    E-Print Network [OSTI]

    mounted to the surgical tools using 3D-printed polymer sleeves designed to mitigate EM interference from

  8. InsideIllinoisFeb. 2, 2012 Vol. 31, No. 14

    E-Print Network [OSTI]

    Lewis, Jennifer

    ,sensoryinformationandmemorytodrivethe animal'sresponsetothesmelloffood. By Phil Ciciora Business and Law Editor W ith mounting con- cerns over

  9. The cardiokine story unfolds: ischemic stress-induced protein secretion

    E-Print Network [OSTI]

    Glembotski, Christopher

    on secreted proteins to mount a response designed to resist stress-induced damage. This review examines

  10. welch@cs.unc.edu Gary Bishop

    E-Print Network [OSTI]

    Fuchs, Henry

    - mounted infrared light-emitting diodes that could be tracked in a one-cubic-meter volume. Beyond the Hi

  11. The Interactive Dining Table Florian Echtler

    E-Print Network [OSTI]

    Deussen, Oliver

    into the table lamp for sensing interaction and a small LED-based projector mounted on the ceiling for displaying

  12. Daily Reporting Rainfall Station TOWNSVILLE AREA Manual Heavy Rainfall Station

    E-Print Network [OSTI]

    Greenslade, Diana

    Keelbottom TM Black River AL Upper Bluewater AL Bluewater AL Toomulla AL Toolakea AL Mount Margaret Little

  13. The Vienna Archives:  Musical Expropriations During the Nazi Era and 21st Century Ramifications

    E-Print Network [OSTI]

    Shapreau, Carla

    2014-01-01T23:59:59.000Z

    91) None Pair of ebony drumsticks, with gilt mounts Tamourinth century, with ebony drumstick with ivory head and boxwood

  14. Our Journey to the Dark Side is Complete! Donna Hanen Muhm Iowa DNR

    E-Print Network [OSTI]

    (men have no need of such a device) across the front-mounted sensor activates the sound of a typical

  15. Information Circular 9465 Handbook for Dust Control in Mining

    E-Print Network [OSTI]

    Saylor, John R.

    .......................................................................... 11 2-1. Machine-mounted scrubber design................................................................................................................... 24 2-2. Dust scrubber used with blowing ventilation ..............................................................................

  16. U.S. DEPARTMENT OF COMMERCE Peter G. Peterson, Secretary

    E-Print Network [OSTI]

    of switch closures produced by 16 small magnets mounted on the Savonius rotor. The next measurement occurred

  17. Evaluation of NEPA-based environmental commitments at four geopressure design wells

    SciTech Connect (OSTI)

    Reed, A.W.; Hunsaker, D.B. Jr.; Roop, R.D.; Webb, J.W.

    1983-09-01T23:59:59.000Z

    The implementation of environmental mitigation and monitoring commitments made for four geopressure design well projects was evaluated. The evaluation was based on site visits conducted in August 1982 and April 1983 and on a review of monitoring and project activity reports provided by DOE contractors. The projects evaluated include: Pleasant Bayou No. 1 in Brazoria County, Texas; Dow Parcperdue in Vermilion Parish, Louisiana; and Gladys McCall and Sweet Lake No. 1 well sites in Cameron Parish, Louisiana. The contractors responsible for drilling and testing activities at the well sites have adequately implemented most of the mitigation measures described in each project's site-specific Environmental Assessment (EA). Exceptions include the lack of impermeable liners for drilling mud pits at the Dow Parcperdue, Gladys McCall, and Pleasant Bayou sites and the lack of a ring levee at the Pleasant Bayou site. Air and water quality and noise monitoring activities were not performed as strictly as outlined in the EAs. A review of the monitoring data collected to date indicates that no significant environmental degradation has occurred. This report recommends additional or future monitoring needs, especially with regard to soil contamination, subsidence, and microseismicity, and provides guidance for decommissioning.

  18. Gulf Coast geopressured-geothermal program summary report compilation. Volume 2-B: Resource description, program history, wells tested, university and company based research, site restoration

    SciTech Connect (OSTI)

    John, C.J.; Maciasz, G.; Harder, B.J.

    1998-06-01T23:59:59.000Z

    The US Department of Energy established a geopressured-geothermal energy program in the mid 1970`s as one response to America`s need to develop alternate energy resources in view of the increasing dependence on imported fossil fuel energy. This program continued for 17 years and approximately two hundred million dollars were expended for various types of research and well testing to thoroughly investigate this alternative energy source. This volume describes the following studies: Design well program; LaFourche Crossing; MG-T/DOE Amoco Fee No. 1 (Sweet Lake); Environmental monitoring at Sweet Lake; Air quality; Water quality; Microseismic monitoring; Subsidence; Dow/DOE L.R. Sweezy No. 1 well; Reservoir testing; Environmental monitoring at Parcperdue; Air monitoring; Water runoff; Groundwater; Microseismic events; Subsidence; Environmental consideration at site; Gladys McCall No. 1 well; Test results of Gladys McCall; Hydrocarbons in production gas and brine; Environmental monitoring at the Gladys McCall site; Pleasant Bayou No. 2 well; Pleasant Bayou hybrid power system; Environmental monitoring at Pleasant Bayou; and Plug abandonment and well site restoration of three geopressured-geothermal test sites. 197 figs., 64 tabs.

  19. Effective July 2010 Catalog Number Product Description List Price

    E-Print Network [OSTI]

    Weber, David J.

    Sputter Coating & Mounting (up to 12 samples) $80 EMF-010 Critical point drying & Mounting, one run $45-embedding labelling perrun, up to 6 specimen $200 EMF-005p Pre-embedding immunogold labelling per run, up to 12 sample, up to 6 sample $12 EMF-009 SEM Sputter Coating & Mounting ( up to 6 samples) $45 EMF-009p SEM

  20. Design and safety analysis of an in-flight, test airfoil

    E-Print Network [OSTI]

    McKnight, Christopher William

    2006-10-30T23:59:59.000Z

    in the Four Bracket System?????????.. Airfoil Mounting Structure????????????????.. Alignment Component With 3 Rocker Arm Assemblies and Eye Bolts?????????????????????????. Mounting Channel???????????????????.... Arcs Allowing for Mounting into Top Surface...????????????... Pocketed Model Showing 4X4 System of Weight Removal???... Shelled Model Without Test Surface????????????... Composite Airfoil Model?????????????????. Airframe Design Illustrating Rib and Skin Panel Design????? Page 48 49 50 51 52 53 54...

  1. A 12,000 year record of explosive volcanism in the Siple Dome Ice Core, West Antarctica

    E-Print Network [OSTI]

    Dunbar, Nelia W.

    of tephra found in the SDMA core: Balenny Island, Pleiades, Mount Berlin, Mount Takahe, and Mount Melbourne]. Continuous long-term records of SO4 2À concentrations [Mayewski et al., 1986, 1997; Legrand et al., 1988 acidity records from electrical conductivity (ECM) [Hammer et al., 1980; Hammer, 1983; Taylor et al., 1993

  2. Covered Product Category: Exterior Lighting

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for outdoor wall-mounted light fixtures or luminaires, outdoor pole/arm-mounted area and roadway luminaires, outdoor pole/arm-mounted decorative luminaires, fuel pump canopy luminaires, bollards, and parking garage luminaires, all of which are FEMP-designated product categories.

  3. Mixed Control Moment Gyro and Momentum Wheel Attitude Control C. Eugene Skelton II

    E-Print Network [OSTI]

    Hall, Christopher D.

    , or non-moving devices like magnetic torquers. A momentum wheel is a high inertia flywheel mounted which makes them non-ideal for rapid slewing. A control moment gyro has a flywheel mounted on a motor that spins at a constant relative speed. The flywheel and motor are mounted to a gimbal motor that can rotate

  4. Bracket for photovoltaic modules

    DOE Patents [OSTI]

    Ciasulli, John; Jones, Jason

    2014-06-24T23:59:59.000Z

    Brackets for photovoltaic ("PV") modules are described. In one embodiment, a saddle bracket has a mounting surface to support one or more PV modules over a tube, a gusset coupled to the mounting surface, and a mounting feature coupled to the gusset to couple to the tube. The gusset can have a first leg and a second leg extending at an angle relative to the mounting surface. Saddle brackets can be coupled to a torque tube at predetermined locations. PV modules can be coupled to the saddle brackets. The mounting feature can be coupled to the first gusset and configured to stand the one or more PV modules off the tube.

  5. Protective interior wall and attach8ing means for a fusion reactor vacuum vessel

    DOE Patents [OSTI]

    Phelps, Richard D. (Greeley, CO); Upham, Gerald A. (Valley Center, CA); Anderson, Paul M. (San Diego, CA)

    1988-01-01T23:59:59.000Z

    An array of connected plates mounted on the inside wall of the vacuum vessel of a magnetic confinement reactor in order to provide a protective surface for energy deposition inside the vessel. All fasteners are concealed and protected beneath the plates, while the plates themselves share common mounting points. The entire array is installed with torqued nuts on threaded studs; provision also exists for thermal expansion by mounting each plate with two of its four mounts captured in an oversize grooved spool. A spool-washer mounting hardware allows one edge of a protective plate to be torqued while the other side remains loose, by simply inverting the spool-washer hardware.

  6. Automated robotic equipment for ultrasonic inspection of pressurizer heater wells

    DOE Patents [OSTI]

    Nachbar, Henry D. (Ballston Lake, NY); DeRossi, Raymond S. (Amsterdam, NY); Mullins, Lawrence E. (Middle Grove, NY)

    1993-01-01T23:59:59.000Z

    A robotic device for remotely inspecting pressurizer heater wells is provided which has the advantages of quickly, precisely, and reliably acquiring data at reasonable cost while also reducing radiation exposure of an operator. The device comprises a prober assembly including a probe which enters a heater well, gathers data regarding the condition of the heater well and transmits a signal carrying that data; a mounting device for mounting the probe assembly at the opening of the heater well so that the probe can enter the heater well; a first motor mounted on the mounting device for providing movement of the probe assembly in an axial direction; and a second motor mounted on the mounting device for providing rotation of the probe assembly. This arrangement enables full inspection of the heater well to be carried out.

  7. Robotic arm

    DOE Patents [OSTI]

    Kwech, Horst (Lake Bluff, IL)

    1989-04-18T23:59:59.000Z

    A robotic arm positionable within a nuclear vessel by access through a small diameter opening and having a mounting tube supported within the vessel and mounting a plurality of arm sections for movement lengthwise of the mounting tube as well as for movement out of a window provided in the wall of the mounting tube. An end effector, such as a grinding head or welding element, at an operating end of the robotic arm, can be located and operated within the nuclear vessel through movement derived from six different axes of motion provided by mounting and drive connections between arm sections of the robotic arm. The movements are achieved by operation of remotely-controllable servo motors, all of which are mounted at a control end of the robotic arm to be outside the nuclear vessel.

  8. Design and operation of a geopressurized-geothermal hybrid cycle power plant

    SciTech Connect (OSTI)

    Campbell, R.G.; Hattar, M.M.

    1991-02-01T23:59:59.000Z

    Geopressured-geothermal resources can contribute significantly to the national electricity supply once technical and economic obstacles are overcome. Power plant performance under the harsh conditions of a geopressured resource was unproven, so a demonstration power plant was built and operated on the Pleasant Bayou geopressured resource in Texas. This one megawatt facility provided valuable data over a range of operating conditions. This power plant was a first-of-a-kind demonstration of the hybrid cycle concept. A hybrid cycle was used to take advantage of the fact that geopressured resources contain energy in more than one form -- hot water and natural gas. Studies have shown that hybrid cycles can yield thirty percent more power than stand-alone geothermal and fossil fuel power plants operating on the same resource. In the hybrid cycle at Pleasant Bayou, gas was burned in engines to generate electricity directly. Exhaust heat from the engines was then combined with heat from the brine to generate additional electricity in a binary cycle. Heat from the gas engine was available at high temperature, thus improving the efficiency of the binary portion of the hybrid cycle. Design power output was achieved, and 3445 MWh of power were sold to the local utility over the course of the test. Plant availability was 97.5% and the capacity factor was over 80% for the extended run at maximum power production. The hybrid cycle power plant demonstrated that there are no technical obstacles to electricity generation at Pleasant Bayou. 14 refs., 38 figs., 16 tabs.

  9. The construction and operation of a flashlamp pumped tunable narrow linewidth dye laser

    E-Print Network [OSTI]

    Hilty, Bruce Robert

    1979-01-01T23:59:59.000Z

    . Grazing Incidence and Littrow Gratings in the Laser Cavity . C. Theoretical Linewidth. I II CONSTRUCTION OF THE FLASHLAMP PUMPED DYE LASER. A. Optical Systems. 1. Laser Head . 2. Resonator Mounts B. Circulatory Systems. C. Electrical System. IV... and Littrow mount grating Diagram of grazing incidence and Littrow mount gratings showing the various inci- dent and diffracted rays . The laser head . Block diagram of the circulatory system. Block diagram of the electrical system . The geometricl path...

  10. The Castaways

    E-Print Network [OSTI]

    Dodge, Mary Louise

    1977-01-01T23:59:59.000Z

    cabin. Spock fired all his re serves in a vital effort to slow, felt the ship shudder with effort, then flina itself against gravity, hard. a Then they were braking, their descent still faster than safety advised, but no longer in danger of meteoric... about you. In any other than a Vulcan I would have thought it a considerable pride in his son." "You surprise me," Spock said mildly. "I hope pleasantly, because I want to ask a favor. I'd like you to accompany me at the concert I'm to give aboard...

  11. Physical Consonance Law of Sound Waves

    E-Print Network [OSTI]

    Mario Goto

    2005-06-16T23:59:59.000Z

    Sound consonance is the reason why it is possible to exist music in our life. However, rules of consonance between sounds had been found quite subjectively, just by hearing. To care for, the proposal is to establish a sound consonance law on the basis of mathematical and physical foundations. Nevertheless, the sensibility of the human auditory system to the audible range of frequencies is individual and depends on a several factors such as the age or the health in a such way that the human perception of the consonance as the pleasant sensation it produces, while reinforced by an exact physical relation, may involves as well the individual subjective feeling.

  12. Computer simulation of production from geothermal-geopressured aquifers. Final report, October 1, 1978 through January 31, 1983

    SciTech Connect (OSTI)

    Doherty, M.G.; Poonawala, N.A.

    1983-07-01T23:59:59.000Z

    The effort utilized a computer to interpret the results of well tests and compile data on gas solubility in brine and the viscosity of brine. A detailed computer reservoir study of a geopressured test well that had been abandoned as a dry hole but became a commercial producer of hydrocarbons is presented. A number of special topical reports pertaining to test activities performed on Department of Energy test wells (MG-T/DOE Amoco Fee No. 1 Well, Leroy Sweezy No. 1 Well, and Pleasant Bayou No. 2 Well) are appended. A referenced article written under this study that appeared in the Journal of Petroleum Technology is also reproduced.

  13. Southern Enclave Issue 52

    E-Print Network [OSTI]

    1999-01-01T23:59:59.000Z

    , of course. that your copy was never sent, but that is seldom the case. Be polite. Good relations bctween a contributor and editor Icad to pleasant working conditions in future. f!oyie(oo #1-Kriff def lliko/Jilfe ("flgr of the fiJ0t3f7 A. G. Steyn...://members.aol/toyshow/ Randy and I will be have a booth at both shows' Come see us' Then we'll see you at MWC the next weekend,,' '\\10,. II"0n Hllles 'li CONGQA TULA TIONS TO ... /;,./(//1 ol1d .lmanda !farris on the birth of their son Robert Bruce Harris. He was born...

  14. Warner Bros. Forgotten Men: Representations of Shifting Masculinities in 1930s Hollywood

    E-Print Network [OSTI]

    Faucette, Michael Brian

    2010-05-19T23:59:59.000Z

    masculinity as “hard” in the persona of James Cagney and his violent acts such as shoving a grapefruit into a woman’s face in The Public Enemy (1931) as wel as displaying “soft” qualities in the persona of Dick Powel as he sang love songs to swooning young... and melodrama, fast-moving stories with hard-surfaced characters in muscular situations. The Warners’ pictures aim at the powerful rather than the pleasant. The Warners’ roster of stars suggests the characteristics of its output: James Cagney, Bete Davis...

  15. Tower systems for Linearly repetitive Delone sets

    E-Print Network [OSTI]

    José Aliste-Prieto; Daniel Coronel

    2010-03-22T23:59:59.000Z

    In this paper we study linearly repetitive Delone sets and prove, following the work of Bellissard, Benedetti and Gambaudo, that the hull of a linearly repetitive Delone set admits a properly nested sequence of box decompositions (tower system) with strictly positive and uniformly bounded (in size and norm) transition matrices. This generalizes a result of Durand for linearly recurrent symbolic systems. Furthermore, we apply this result to give a new proof of a classic estimation of Lagarias and Pleasants on the rate of convergence of patch-frequencies.

  16. Point Venture, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S6665°,Jump to:Pleasant, New Jersey:

  17. Pointe Coupee Parish, Louisiana: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S6665°,Jump to:Pleasant, New Jersey:Pointe

  18. Pojoaque, New Mexico: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S6665°,Jump to:Pleasant, New

  19. Poland, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S6665°,Jump to:Pleasant, NewOhio: Energy

  20. Polema JSC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S6665°,Jump to:Pleasant, NewOhio:

  1. Policies and Measures to Realise Industrial Energy Efficiency and Mitigate

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S6665°,Jump to:Pleasant, NewOhio:Climate

  2. Policy Analysis Modeling System (PAMS) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S6665°,Jump to:Pleasant,

  3. Policy Analysis Modeling System (PAMS) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S6665°,Jump to:Pleasant,Jump to:

  4. Polish Academy of Sciences Institute of Chemical Engineering | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S6665°,Jump to:Pleasant,Jump

  5. Politecnico di Milano | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S6665°,Jump to:Pleasant,JumpPolitecnico di

  6. Polk City, Iowa: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratini Energia S6665°,Jump to:Pleasant,JumpPolitecnico

  7. City of Mulberry, Kansas (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovationin Urban TransportMartinsville,Minidoka,City ofIowaMt Pleasant,City

  8. Neutron generators with size scalability, ease of fabrication and multiple ion source functionalities

    SciTech Connect (OSTI)

    Elizondo-Decanini, Juan M

    2014-11-18T23:59:59.000Z

    A neutron generator is provided with a flat, rectilinear geometry and surface mounted metallizations. This construction provides scalability and ease of fabrication, and permits multiple ion source functionalities.

  9. Department of Mechanical and Nuclear Engineering Spring 2011 Wind Tunnel Automation Project

    E-Print Network [OSTI]

    Demirel, Melik C.

    PENNSTATE Department of Mechanical and Nuclear Engineering Spring 2011 Wind Tunnel Automation Project Phase II - Automated Bike Turret Mount Overview SYNERGE LLC is a consulting company working

  10. Brownfields redevelopment in rural Massachusetts : understanding the obstacles & identifying opportunities for success

    E-Print Network [OSTI]

    Gallant, Darlene E. (Darlene Elizabeth), 1978-

    2004-01-01T23:59:59.000Z

    Remediating and redeveloping contaminated properties represents a mounting national concern. Commonly referred to as brownfields, these contaminated and often vacant or underused, properties present significant environmental ...

  11. GEORGIOS HOMEPAGE

    E-Print Network [OSTI]

    B Reactor at the Hanford Site, near Richland, Washington, USA ReactorB_photo. Mount Rainier National Park in WA MtRainier. Palouse falls in WA Palousefalls ...

  12. Laser Desorption Analysis | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    mounted on standardized EMSL platens and attached to a vacuum manipulator. Several excitation, or pump, nanosecond and femtosecond lasers are available in the laboratory for...

  13. Co-Designing Sustainable Communities: The Identification and Incorporation of Social Performance Metrics in Native American Sustainable Housing and Renewable Energy System Design

    E-Print Network [OSTI]

    Shelby, Ryan

    2013-01-01T23:59:59.000Z

    Carpet Arcade Rooms Solar Panels Big Yards Smart Lightingincreasing usage of solar panels Reduce energy consumptionwith roof mounted solar panel and solar power plant ideal

  14. Sandia Energy - Measuring Inflow and Wake Flow Turbulence Using...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    that characterizes inflow and wake flow velocity and turbulence around a vertical axis turbine deployed at the Roza Canal, Yakima, Washington. The ADV was mounted on a...

  15. Sandia Energy - EC Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    but are expected to have minimal effects on surface mounted devices like the vertical axis turbine device designed for RM2. A simple methodology for obtaining an approximate...

  16. adrar mountains fishes: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    gravures de la rgion vont ensuite Paris-Sud XI, Universit de 2 Determinants of fish assemblage structure in Mount Itoupe mountain streams (French Guiana) Biology and...

  17. --No Title--

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of emissions from trucks, researchers will use roadside mounted panels to perform magnetic probing and sensing. This will enable them to calculate emissions for an...

  18. Energy Efficiency and Conservation Block Grant Program

    Broader source: Energy.gov (indexed) [DOE]

    efficiency improvements, and 3) install a roof-mounted, approximately 165 kW, photovoltaic solar energy system with UPS battery backup on Edison Municipal Complex....

  19. LIMITATIONS ON THE RESOLUTION OF YAG:CE BEAM PROFILE MONITOR...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    x-ray wire scan measurements. The target was positioned on the motorized mount inside the Compton scattering beamline 10, allowing fast switching between the diagnostics. .50...

  20. Building America Whole-House Solutions for New Homes: Lancaster...

    Energy Savers [EERE]

    Lancaster County Career and Technology Center Green Home 3 - Mount Joy, Pennsylvania Building America Whole-House Solutions for New Homes: Lancaster County Career and Technology...

  1. CX-006020: Categorical Exclusion Determination | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    3) replace existing parking lot and campus roadway luminaries with beta edge light emitting diode (LED) luminaries and motion sensors to be mounted on existing poles; 4) install...

  2. Slide 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    between flowerpot and FMA quad * Mount ORRUBA detectors inside Gammasphere * Thin-walled chamber (minimize absorptionscattering of gammas) * Minimize detector-preamplifier...

  3. Department of Veterans Affairs, FONSI - Rooftop solar PV power...

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications Department of Veterans Affairs, FONSI - Ground mounted solar photovoltaic power at San Joaquin National Cemetery Department of Energy Technical...

  4. E-Print Network 3.0 - acceleration employing underwater Sample...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sciences 5 Proceedings of the 2001 IEEE International Conference on Robotics & Automation Summary: -26, 2001 Control of Underwater ManipulatorsMounted on nn ROV Using...

  5. Data:E0f44a21-3c93-457f-85fc-551e478445f8 | Open Energy Information

    Open Energy Info (EERE)

    to the customer for lighting systems not mounted on existing power poles, for those systems employing underground electrical feed, and for temporary installations. Such...

  6. Data:8cde9375-163a-492b-8e18-766f384486d1 | Open Energy Information

    Open Energy Info (EERE)

    to the customer for lighting systems not mounted on existing power poles, for those systems employing underground electrical feed, and for temporary installations. Such...

  7. Data:D7bc91f9-a098-4012-8f17-c1c70504a903 | Open Energy Information

    Open Energy Info (EERE)

    to the customer for lighting systems not mounted on existing power poles, for those systems employing underground electrical feed, and for temporary installations. Such...

  8. Data:C47b35be-b49d-4c93-9c1f-1e03b57a0733 | Open Energy Information

    Open Energy Info (EERE)

    to the customer for lighting systems not mounted on existing power poles, for those systems employing underground electrical feed, and for temporary installations. Such...

  9. Data:08989826-8695-4702-962e-7dfa224226d2 | Open Energy Information

    Open Energy Info (EERE)

    to the customer for lighting systems not mounted on existing power poles, for those systems employing underground electrical feed, and for temporary installations. Such...

  10. Data:754687fa-fe35-4bec-a0a3-293982b6d477 | Open Energy Information

    Open Energy Info (EERE)

    to the customer for lighting systems not mounted on existing power poles, for those systems employing underground electrical feed, and for temporary installations. Such...

  11. Data:00e322c7-1bae-4b90-996a-d8da25351493 | Open Energy Information

    Open Energy Info (EERE)

    to the customer for lighting systems not mounted on existing power poles, for those systems employing underground electrical feed, and for temporary installations. Such...

  12. Data:17560dcf-c622-4e2e-9649-0e92704b3a93 | Open Energy Information

    Open Energy Info (EERE)

    to the customer for lighting systems not mounted on existing power poles, for those systems employing underground electrical feed, and for temporary installations. Such...

  13. Data:422bd1dd-77bc-4623-9720-85294b12010d | Open Energy Information

    Open Energy Info (EERE)

    to the customer for lighting systems not mounted on existing power poles, for those systems employing underground electrical feed, and for temporary installations. Such...

  14. Data:B5e7f284-3a70-47a8-b7f3-02c5524aaded | Open Energy Information

    Open Energy Info (EERE)

    to the customer for lighting systems not mounted on existing power poles, for those systems employing underground electrical feed, and for temporary installations. Such...

  15. Data:511636b3-2a65-4fbf-9f19-a76dce2da354 | Open Energy Information

    Open Energy Info (EERE)

    to the customer for lighting systems not mounted on existing power poles, for those systems employing underground electrical feed, and for temporary installations. Such...

  16. Data:Bc8e702d-2bf8-4811-95d7-4e84ceff990b | Open Energy Information

    Open Energy Info (EERE)

    to the customer for lighting systems not mounted on existing power poles, for those systems employing underground electrical feed, and for temporary installations. Such...

  17. Plug and Play: Purchase, Install, and Connect Residential Solar...

    Energy Savers [EERE]

    roof mounting system, eliminating the need for racking systems. Once the lightweight solar panels are in place, the system then self-tests for proper installation and...

  18. High-Efficiency Solar Cogeneration with Thermophotovoltaic &...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    system are produced, including, Lighting Luminary Fixtures, weatherized building-mounted solar receiver, fiber cables, IR electricity generation. System performance will be...

  19. atlas barrel toroid: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a direct product of the prototyping programme undertaken, we have also developed the tooling required to precisely mount the components of the mechanism to their respective...

  20. atlas pixel stave: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a direct product of the prototyping programme undertaken, we have also developed the tooling required to precisely mount the components of the mechanism to their respective...