Powered by Deep Web Technologies
Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Wind motor applications for transportation  

SciTech Connect (OSTI)

Motion equation for a vehicle equipped with a wind motor allows, taking into account the drag coefficients, to determine the optimal wind drag velocity in the wind motor`s plane, and hence, obtain all the necessary data for the wind wheel blades geometrical parameters definition. This optimal drag velocity significantly differs from the flow drag velocity which determines the maximum wind motor power. Solution of the motion equation with low drag coefficients indicates that the vehicle speed against the wind may be twice as the wind speed. One of possible transportation wind motor applications is its use on various ships. A ship with such a wind motor may be substantially easier to steer, and if certain devices are available, may proceed in autonomous control mode. Besides, it is capable of moving within narrow fairways. The cruise speed of a sailing boat and wind-motored ship were compared provided that the wind velocity direction changes along a harmonic law with regard to the motion direction. Mean dimensionless speed of the wind-motored ship appears to be by 20--25% higher than that of a sailing boat. There was analyzed a possibility of using the wind motors on planet rovers in Mars or Venus atmospheric conditions. A Mars rover power and motor system has been assessed for the power level of 3 kW.

Lysenko, G.P.; Grigoriev, B.V.; Karpin, K.B. [Moscow Aviation Inst. (Russian Federation)

1996-12-31T23:59:59.000Z

2

Best Practices in Non-Motorized Transport Planning, Implementation...  

Open Energy Info (EERE)

Motorized Transport Planning, Implementation and Maintenance Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Best Practices in Non-Motorized Transport Planning,...

3

Parking & Transportation Department RESIDENT -PERSONAL INFORMATION  

E-Print Network [OSTI]

Parking & Transportation Department RESIDENT - PERSONAL INFORMATION Date know if you are interested in: Public Transportation Car Pool Van Pool _____________________________________________________________________________________ Please be sure to contact the Parking & Transportation Department with any changes to your information, i

Oliver, Douglas L.

4

Motor transport of self-assembled cargos in crowded environments  

E-Print Network [OSTI]

). Additionally, experimental studies have shown that teams of motors are capable of bypassing static obstacles and experimental bio- physical model systems of intracellular cargo have assumed fixed teams of motors transporting. axonal transport | cytoplasmic dynein Intracellular transport is an essential cellular process used

Ross, Jennifer

5

Non-Motorized Facility Inventory CTS Annual Transportation Research Conference  

E-Print Network [OSTI]

Non-Motorized Facility Inventory CTS Annual Transportation Research Conference May 23, 2012 Jesse an inventory and assessment of the non-motorized facilities along Carver County roadways 2. Identify the gaps-8 Safety Issues Identified #12;non-motorized facilities inventory #12;GIS mapping capabilities #12;An

Minnesota, University of

6

Force-velocity relations for multiple molecular motor transportation  

E-Print Network [OSTI]

A transition rate model of cargo transportation by N effective molecular motors is proposed. Under the assumption of steady state, the force-velocity curve of multi-motor system can be derived from the force-velocity curve of single motor. Our work shows, in the case of low load, the velocity of multi-motor system can decrease or increase with increasing motor number, which is dependent on the single motor force-velocity curve. And most commonly, the velocity decreases. This gives a possible explanation to some recent experimental observations.

Wang, Ziqing

2009-01-01T23:59:59.000Z

7

Force-velocity relations for multiple-molecular-motor transport  

E-Print Network [OSTI]

A transition rate model of cargo transport by $N$ molecular motors is proposed. Under the assumption of steady state, the force-velocity curve of multi-motor system can be derived from the force-velocity curve of single motor. Our work shows, in the case of low load, the velocity of multi-motor system can decrease or increase with increasing motor number, which is dependent on the single motor force-velocity curve. And most commonly, the velocity decreases. This gives a possible explanation to some recent

Ziqing Wang; Ming Li

2009-10-01T23:59:59.000Z

8

Transport of organelles by elastically coupled motor proteins  

E-Print Network [OSTI]

Motor-driven intracellular transport is a complex phenomenon where multiple motor proteins attached to a cargo are simultaneously engaged in pulling activity, often leading to tug-of-war and bidirectional motion. However, most mathematical and computational models ignore the details of the motor-cargo interaction. A few papers have studied more realistic models of cargo transport by including elastic motor-cargo coupling, but either restricts the number of motors and/or uses purely phenomenological forms for energy-dependent hopping rates. Here, we study a generic Model In which N motors are elastically coupled to a cargo, which itself is subject to thermal noise in the cytoplasm and an additional external applied force. The motor-hopping rates are chosen to satisfy detailed balance with respect to the energy of stretching. The master equation is converted to a linear Fokker-Planck equation (LFPE), which yields the average positions of the cargo and motors, as well as their fluctuations and correlation functions. We apply this formalism to two specific forms of the hopping rates. Analytical results are obtained for mean cargo velocity, diffusion coefficient and the average force experienced by each motor for arbitrary N, and compared with numerical simulations. The expansion procedure also allows us to quantify load-sharing features among the cargo-bound motors. In general, we observe significant deviations between analytical predictions based on LFPE and the corresponding numerical results, which suggests a prominent role for higher order corrections.

Deepak Bhat; Manoj Gopalakrishnan

2014-12-17T23:59:59.000Z

9

Influence of direct motor-motor interaction in models for cargo transport by a single team of motors  

E-Print Network [OSTI]

We analyze theoretically the effects of excluded-volume interactions between motors on the dynamics of a cargo driven by multiple motors. The model considered shares many commons with other recently proposed in the literature, with the addition of direct interaction between motors and motor back steps. The cargo is assumed to follow a continuum Langevin dynamics, while individual motors evolve following a Monte Carlo algorithm based on experimentally accessible probabilities for discrete forward and backward jumps, and attachment and detachment rates. The links between cargo and motors are considered as non linear springs. By means of numerical simulations we compute the relevant quantities characterizing the dynamical properties of the system, and we compare the results to those for non interacting motors. We find that interactions lead to quite relevant changes in the force-velocity relation for cargo, with a considerable reduction of the stall force, and cause also a notable decrease of the run length. These effects are mainly due to traffic-like phenomena in the microtubule. The consideration of several parallel tracks for motors reduces such effects. However, we find that for realistic values of the number of motors and the number of tracks, the influence of interactions on the global parameters of transport of cargo are far from being negligible. Our studies provide also an analysis of the relevance of motor back steps on the modeling, and of the influence of different assumptions for the detachment rates. In particular, we discuss these two aspects in connection with the possibility of observing processive back motion of cargo at large load forces.

Sebastian Bouzat; Fernando Falo

2010-12-14T23:59:59.000Z

10

Cargo transportation by two species of motor protein  

E-Print Network [OSTI]

The cargo motion in living cells transported by two species of motor protein with different intrinsic directionality is discussed in this study. Similar to single motor movement, cargo steps forward and backward along microtubule stochastically. Recent experiments found that, cargo transportation by two motor species has a memory, it does not change its direction as frequently as expected, which means that its forward and backward step rates depends on its previous motion trajectory. By assuming cargo has only the least memory, i.e. its step direction depends only on the direction of its last step, two cases of cargo motion are detailed analyzed in this study: {\\bf (I)} cargo motion under constant external load; and {\\bf (II)} cargo motion in one fixed optical trap. Due to the existence of memory, for the first case, cargo can keep moving in the same direction for a long distance. For the second case, the cargo will oscillate in the trap. The oscillation period decreases and the oscillation amplitude increases with the motor forward step rates, but both of them decrease with the trap stiffness. The most likely location of cargo, where the probability of finding the oscillated cargo is maximum, may be the same as or may be different with the trap center, which depends on the step rates of the two motor species. Meanwhile, if motors are robust, i.e. their forward to backward step rate ratios are high, there may be two such most likely locations, located on the two sides of the trap center respectively. The probability of finding cargo in given location, the probability of cargo in forward/backward motion state, and various mean first passage times of cargo to give location or given state are also analyzed.

Yunxin Zhang

2012-11-06T23:59:59.000Z

11

Tug-of-war as a cooperative mechanism for bidirectional cargo transport by molecular motors  

E-Print Network [OSTI]

Intracellular transport is based on molecular motors that pull cargos along cytoskeletal filaments. One motor species always moves in one direction, e.g. conventional kinesin moves to the microtubule plus end, while cytoplasmic dynein moves to the microtubule minus end. However, many cellular cargos are observed to move bidirectionally, involving both plus-end and minus-end directed motors. The presumably simplest mechanism for such bidirectional transport is provided by a tug-of-war between the two motor species. This mechanism is studied theoretically using the load-dependent transport properties of individual motors as measured in single-molecule experiments. In contrast to previous expectations, such a tug-of-war is found to be highly cooperative and to exhibit seven different motility regimes depending on the precise values of the single motor parameters. The sensitivity of the transport process to small parameter changes can be used by the cell to regulate its cargo traffic.

Melanie J. I. MŁller; Stefan Klumpp; Reinhard Lipowsky

2008-07-03T23:59:59.000Z

12

myCopter Enabling Technologies for Personal Aerial Transportation Systems  

E-Print Network [OSTI]

towards a Personal Aerial Transportation System, in which vehicles would also have vertical space into account the required operational infrastructure, instead of starting with the design of a vehicle. By investigating human-machine interfaces and training, automation technologies, and socio-economic impact, the my

13

E-Print Network 3.0 - atvs motorized toys Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Search Sample search results for: atvs motorized toys Page: << < 1 2 3 4 5 > >> 1 Bicycle and Personal Transportation Devices Page 1 of 5 Virginia Polytechnic Institute and...

14

Human-Centered Public Transportation Systems for Persons with Cognitive Disabilities  

E-Print Network [OSTI]

Human-Centered Public Transportation Systems for Persons with Cognitive Disabilities -- Challenges to use mainstream public transportation systems. This project faces two unique challenges: (1) there are no true "experts" who understand all facets of public transportation system design, operation

Fischer, Gerhard

15

Enhancing the stability of kinesin motors for microscale transport applications{  

E-Print Network [OSTI]

714989a Biomolecular motors, such as kinesins, have great potential for micro-actuation and micro, and there has been considerable interest in developing hybrid devices harnessing the mechanical motion provided and electric fields.3­14 However, a major issue in integrating these biological components into functional

Hancock, William O.

16

A Novel MagPipe Pipeline transportation system using linear motor drives  

SciTech Connect (OSTI)

A novel capsule pipeline transportation system using linear motor drives, called Magplane MagPipe, is under development with the intention to replace trucks and railways for hauling materials from the mine to the rail head, power plant, or processing plant with reduced operating cost and energy consumption. The initial demonstration of a MagPipe line in Inner Mongolia will be a 500-m-long double-pipe coal transport system with the design transportation capacity of 3 Mega-Mg per year. The pipeline consists of 6-m-long plastic pipe modules with an I-beam suspension system inside the pipe to carry sets of five coupled capsules. The pipe will also contain noncontinuous motor winding modules spaced at 50-m intervals. A set of Halbach-arrayed permanent magnets on the bottom of the capsules interact with the linear motor windings to provide propulsion. The motor is driven by variable frequency drives outside the pipe to control the speed. This paper briefly describes the overall MagPipe pipeline transportation system, including the preliminary conclusions of the linear synchronous motor analysis.

Fang, J.R.; Montgomery, D.B.; Roderick, L. [Magplane Technology Inc., Littleton, MA (United States)

2009-11-15T23:59:59.000Z

17

MOTOR VEHICLE RECORD AUTHORIZATION This form authorizes Parking and Transportation (PTS) Fleet Services to conduct a motor vehicle record check to  

E-Print Network [OSTI]

MOTOR VEHICLE RECORD AUTHORIZATION This form authorizes Parking and Transportation (PTS) ≠ Fleet Services to conduct a motor vehicle record check to verify eligibility to operate University of Michigan (U-M) vehicles. Form Instructions: ∑ Complete each section of the form ∑ Print and fax

Kirschner, Denise

18

THE POTENTIAL FOR CO2 EMISSIONS TRADING IN TRANSPORT: THE CASE OF PERSONAL VEHICLES AND FREIGHT  

E-Print Network [OSTI]

1 THE POTENTIAL FOR CO2 EMISSIONS TRADING IN TRANSPORT: THE CASE OF PERSONAL VEHICLES AND FREIGHT, it is of some interest to explore the inclusion of road transport in emission trading schemes. Starting from

Paris-Sud XI, Université de

19

Molecular motors transporting cargos in viscoelastic cytosol: how to beat subdiffusion with a power stroke?  

E-Print Network [OSTI]

Anomalously slow passive diffusion, $\\langle \\delta x^2(t)\\rangle\\simeq t^{\\alpha}$, with $0<\\alpha<1$, of larger tracers such as messenger RNA and endogenous submicron granules in the cytoplasm of living biological cells has been demonstrated in a number of experiments and has been attributed to the viscoelastic physical nature of the cellular cytoplasm. This finding provokes the question to which extent active intracellular transport is affected by this viscoelastic environment: does the subdiffusion of free submicron cargo such as vesicles and organelles always imply anomalously slow transport by molecular motors such as kinesins, that is, directed transport characterized by a sublinear growth of the mean distance, $\\langle x(t)\\rangle\\simeq t^{\\alpha_{\\rm eff}}$, with $0<\\alpha_{\\rm eff}<1$? Here we study a generic model approach combining the commonly accepted two-state Brownian ratchet model of kinesin motors based on the continuous-state diffusion along microtubule driven by a flashing bind...

Goychuk, Igor; Metzler, Ralf

2013-01-01T23:59:59.000Z

20

Motors  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment SurfacesResource ProgramModification andinterface1 EEnergy, OfficeMotors Sign In

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Lattice-gas model for active vesicle transport by molecular motors with opposite polarities  

E-Print Network [OSTI]

We introduce a multi-species lattice gas model for motor protein driven collective cargo transport on cellular filaments. We use this model to describe and analyze the collective motion of interacting vesicle cargoes being carried by oppositely directed molecular motors, moving on a single biofilament. Building on a totally asymmetric exclusion process (TASEP) to characterize the motion of the interacting cargoes, we allow for mass exchange with the environment, input and output at filament boundaries and focus on the role of interconversion rates and how they affect the directionality of the net cargo transport. We quantify the effect of the various different competing processes in terms of non-equilibrium phase diagrams. The interplay of interconversion rates, which allow for flux reversal and evaporation/deposition processes introduce qualitatively new features in the phase diagrams. We observe regimes of three-phase coexistence, the possibility of phase re-entrance and a significant flexibility in how the different phase boundaries shift in response to changes in control parameters. The moving steady state solutions of this model allows for different possibilities for the spatial distribution of cargo vesicles, ranging from homogeneous distribution of vesicles to polarized distributions, characterized by inhomogeneities or {\\it shocks}. Current reversals due to internal regulation emerge naturally within the framework of this model. We believe this minimal model will clarify the understanding of many features of collective vesicle transport, apart from serving as the basis for building more exact quantitative models for vesicle transport relevant to various {\\it in-vivo} situations.

Sudipto Muhuri; Ignacio Pagonabarraga

2010-09-09T23:59:59.000Z

22

Combining information processing, personality, and demographic variables to predict motor vehicle crash involvement  

E-Print Network [OSTI]

and reflects attitudes, beliefs, and motivations of drivers (Elander et al. , 1993). McGwire (1976) has suggested that, in general, people who are involved in accidents are emotionally immature, irresponsible, unhappy, and more likely to have a disturbed... crashes, although this approach is often successfully used in other areas. For instance, Hansen (1989) proposed a viable model of the cause of industrial accidents that included biodata, personality, and cognitive factors. As suggested by Lawton...

Hanson, Amber Ann

2000-01-01T23:59:59.000Z

23

Dynein Motor Domain Shows Ring-Shaped Motor, Buttress  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Dynein Motor Domain Shows Ring-Shaped Motor, Buttress Print Movement is fundamental to life. It takes place even at the cellular level where cargo is continually being transported...

24

Social change and cycling as a form of sustainable transportation : the behavior-policy interaction in a medium-sized developing city  

E-Print Network [OSTI]

In developing countries, growth frequently parallels increasing motorization rates, and visions of mobility are often centered on the private automobile as the most flexible form of personal transportation and a symbol of ...

Teich, Tegin L. (Tegin Leigh)

2008-01-01T23:59:59.000Z

25

MotorWeek  

ScienceCinema (OSTI)

In 2008, PBS's MotorWeek, television's original automotive magazine, visited Argonne's Transportation Technology R&D Center "to learn what it really takes to make clean power sources a viable reality."

None

2013-04-19T23:59:59.000Z

26

A Cooperative Personal Automated Transport System A CityMobil Demonstration in Rocquencourt  

E-Print Network [OSTI]

the problem of the autonomous navigation and coordination of multiple driverless vehicles for the transport advanced concepts for efficient urban transportation capable of reducing energy consumption, optimizing during the period of 3 months service. This demonstration showed how autonomous road vehicles can

Paris-Sud XI, Université de

27

Advanced Motors  

SciTech Connect (OSTI)

Project Summary Transportation energy usage is predicted to increase substantially by 2020. Hybrid vehicles and fuel cell powered vehicles are destined to become more prominent as fuel prices rise with the demand. Hybrid and fuel cell vehicle platforms are both dependent on high performance electric motors. Electric motors for transportation duty will require sizeable low-speed torque to accelerate the vehicle. As motor speed increases, the torque requirement decreases which results in a nearly constant power motor output. Interior permanent magnet synchronous motors (IPMSM) are well suited for this duty. , , These rotor geometries are configured in straight lines and semi circular arc shapes. These designs are of limited configurations because of the lack of availability of permanent magnets of any other shapes at present. We propose to fabricate rotors via a novel processing approach where we start with magnet powders and compact them into a net shape rotor in a single step. Using this approach, widely different rotor designs can be implemented for efficiency. The current limitation on magnet shape and thickness will be eliminated. This is accomplished by co-filling magnet and soft iron powders at specified locations in intricate shapes using specially designed dies and automatic powder filling station. The process fundamentals for accomplishing occurred under a previous Applied Technology Program titled, √?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬Ę√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?Motors and Generators for the 21st Century√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬Ę√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬?√?¬Ě. New efficient motor designs that are not currently possible (or cost prohibitive) can be accomplished by this approach. Such an approach to motor fabrication opens up a new dimension in motor design. Feasibility Results We were able to optimize a IPMSM rotor to take advantage of the powder co-filling and DMC compaction processing methods. The minimum low speed torque requirement of 5 N-m can be met through an optimized design with magnet material having a Br capability of 0.2 T. This level of magnetic performance can be met with a variety of bonded magnet compositions. The torque ripple was found to drop significantly by using thinner magnet segments. The powder co-filling and subsequent compaction processing allow for thinner magnet structures to be formed. Torque ripple can be further reduced by using skewing and pole shaping techniques. The techniques can be incorporated into the rotor during the powder co-filling process.

Knoth, Edward A.; Chelluri, Bhanumathi; Schumaker, Edward J.

2012-12-14T23:59:59.000Z

28

The Quantified Traveler: Using personal travel data to promote sustainable transport behavior  

E-Print Network [OSTI]

a goal to reduce my carbon footprint. I value the bene?ts toof their transportation carbon footprint, and that (b) thea goal to reduce their carbon footprint, a clear summary of

2011-01-01T23:59:59.000Z

29

Autonomous personal vehicle for the first- and last-mile transportation services  

E-Print Network [OSTI]

This paper describes an autonomous vehicle testbed that aims at providing the first- and last- mile transportation services. The vehicle mainly operates in a crowded urban environment whose features can be extracted a ...

Chong, Z. J.

30

Greening Transportation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Transportation Goal 2: Greening Transportation LANL supports and encourages employees to reduce their personal greenhouse gas emissions by offering various commuting and work...

31

Department of Electrical Engineering Fall 2009 Electridyne Motor  

E-Print Network [OSTI]

PENNSTATE Department of Electrical Engineering Fall 2009 Electridyne Motor Overview Our sponsored project was to design an elecrtic motor for an urban transportation vehicle, the challenges involved included research into motor design, consideration of the materials, and the electromagnetic parameters

Demirel, Melik C.

32

Transportation  

E-Print Network [OSTI]

Transportation in ancient Egypt entailed the use of boats2007 Land transport in Roman Egypt: A study of economics andDieter 1991 Building in Egypt: Pharaonic stone masonry. New

Vinson, Steve

2013-01-01T23:59:59.000Z

33

Electric Motors  

Broader source: Energy.gov [DOE]

Section 313 of the Energy Independence and Security Act (EISA) of 2007 raised Federal minimum efficiency standards for general-purpose, single-speed, polyphase induction motors of 1 to 500 horsepower (hp). This new standard took effect in December 2010. The new minimum efficiency levels match FEMP's performance requirement for these motors.

34

Exploration of robotic-wheel technology for enhanced urban mobility and city scale omni-directional personal transportation  

E-Print Network [OSTI]

Mobility is traditionally thought of as freedom to access more goods and services. However, in my view, mobility is also largely about personal freedom, i.e., the ability to exceed one's physical limitations, in essence, ...

Poblano, Raul-David Valdivia

2008-01-01T23:59:59.000Z

35

Transportation Management Research Collection /  

E-Print Network [OSTI]

, Peterbilt Motors, and General Electric. He was a national panel member of the American Arbitration, Noise and Environmental Pollution, Transportation Co-ordination and Consolidation, Transportation -- Docket 8613 1957 Civil Aeronautics Board ≠ General passenger fare investigation -- Docket 8008 et al

Handy, Todd C.

36

Premium Efficient Motors  

E-Print Network [OSTI]

Premium efficient motors are available which convert electrical energy into mechanical energy with fewer losses than the more standard motors. The fewer losses in these motors are due to changes in the motor design and improved manufacturing methods...

Moser, P. R.

1984-01-01T23:59:59.000Z

37

Personal Genomics, Personalized Medicine,  

E-Print Network [OSTI]

Personal Genomics, Personalized Medicine, & YOU Carrie Iwema, PhD, MLS 21st May 2012 AAAS/Science Translational Medicine panel discussion; MLA 2012 #12;Timeline: Human Genome Sequence HSLS, U.Pitt 1995 2014 2000 2003 2007 2007 2010 Human Genome Draft Sequence Complete Human Reference Genome Individual Human

Napp, Nils

38

Transportation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatusButler TinaContact-Information-Transmission SignTransport

39

Microtubule Motors in Microfluidics Maruti Uppalapati,  

E-Print Network [OSTI]

CHAPTER 1 3 Microtubule Motors in Microfluidics Maruti Uppalapati, 1 Ying-Ming Huang, 2 Shankar division. Because emerging microfluidic devices uti- lize channel geometries similar to cellular scales in incorporating biomotor-driven transport into microfluidic devices. Kinesin-driven transport has the advantage

Hancock, William O.

40

Traffic of cytoskeletal motors with disordered attachment rates  

E-Print Network [OSTI]

Motivated by experimental results on the interplay between molecular motors and tau proteins, we extend lattice-based models of intracellular transport to include a second species of particle which locally influences the motor-filament attachment rate. We consider various exactly solvable limits of a stochastic multi-particle model before focusing on the low-motor-density regime. Here, an approximate treatment based on the random walk behaviour of single motors gives good quantitative agreement with simulation results for the tau-dependence of the motor current. Finally, we discuss the possible physiological implications of our results.

H. Grzeschik; R. J. Harris; L. Santen

2008-06-24T23:59:59.000Z

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

MOTOR VEHICLE USE PROGRAM DRIVER SAFETY TIPS  

E-Print Network [OSTI]

MOTOR VEHICLE USE PROGRAM DRIVER SAFETY TIPS Observe Speed Limits and Traffic Laws ≠ Allow - Employees who drive Institute or privately owned vehicles on Institute business must possess and carry person. Insurance - Employees who operate their privately owned vehicles on Institute business shall

42

Implementing Motor Decision Plans  

E-Print Network [OSTI]

Implementing Motor Decision Plans R. Neal Elliott, Ph.D., P.E., Senior Associate American Council for an Energy-Efficient Economy (ACEEE), Washington, DC Abstract The first step to reducing energy costs and increasing reliability in motors... when a motor fails and must either be replaced or repaired. This is represented visually in Figure 1. When purchasing a motor for a new application, time is usually available to consider various options. However, once a motor has failed...

Elliott, R. N.

43

Authors' Version Published Version: http://dx.doi.org/10.1016/j.pmr.2009.07.009 Quality of Life Technology; The State of Personal Transportation  

E-Print Network [OSTI]

of "automobility" [1] is likely to continue and it appears that older persons will need to drive more in the future

Sheikh, Yaser Ajmal

44

Molecular motors DOI: 10.1002/smll.200500223  

E-Print Network [OSTI]

. Hancock* Kinesin molecular motors harness the energy of ATP hy- drolysis to transport cargo epifluorescence or evanescent wave microscopy, and show that motor function is unaffected by particle fluorophores can be visualized by simple epifluorescence microscopy rather than the evanescent wave microscopy

Hancock, William O.

45

Implementing Motor Management  

E-Print Network [OSTI]

Electric motors account for sixty five percent of industrial energy consumed today. There are many opportunities to conserve electricity by using more energy efficient motors and drives. Proven technologies and practices can reduce energy...

Colip, R. L.

46

Hazardous Material Transportation Safety (South Dakota)  

Broader source: Energy.gov [DOE]

This legislation authorizes the Division of Highway Safety, in the Department of Public Safety, to promulgate regulations pertaining to the safe transportation of hazardous materials by a motor...

47

Alternatives to traditional transportation fuels: An overview  

SciTech Connect (OSTI)

This report presents the first compilation by the Energy Information Administration (EIA) of information on alternatives to gasoline and diesel fuel. The purpose of the report is: (1) to provide background information on alternative transportation fuels and replacement fuels compared with gasoline and diesel fuel, and (2) to furnish preliminary estimates of alternative transportation fuels and alternative fueled vehicles as required by the Energy Policy Act of 1992 (EPACT), Title V, Section 503, ``Replacement Fuel Demand Estimates and Supply Information.`` Specifically, Section 503 requires the EIA to report annually on: (1) the number and type of alternative fueled vehicles in existence the previous year and expected to be in use the following year, (2) the geographic distribution of these vehicles, (3) the amounts and types of replacement fuels consumed, and (4) the greenhouse gas emissions likely to result from replacement fuel use. Alternative fueled vehicles are defined in this report as motorized vehicles licensed for on-road use, which may consume alternative transportation fuels. (Alternative fueled vehicles may use either an alternative transportation fuel or a replacement fuel.) The intended audience for the first section of this report includes the Secretary of Energy, the Congress, Federal and State agencies, the automobile manufacturing industry, the transportation fuel manufacturing and distribution industries, and the general public. The second section is designed primarily for persons desiring a more technical explanation of and background for the issues surrounding alternative transportation fuels.

Not Available

1994-06-01T23:59:59.000Z

48

Lithographically Patterned Channels Spatially Segregate Kinesin Motor  

E-Print Network [OSTI]

* Departments of Bioengineering and Electrical Engineering and Materials Research Institute, The Pennsyl and transporting material at nanoscale dimensions, there is considerable interest in harnessing motor proteins), cumulative forces on the order of nN per ¬Ķm2 are theoretically possible. The size, efficiency, and potential

Hancock, William O.

49

IEA Implementing Agreement on Advanced Motor Fuels Ethanol as a Fuel for  

E-Print Network [OSTI]

EFP06 IEA Implementing Agreement on Advanced Motor Fuels Ethanol as a Fuel for Road Transportation -- Advanced Motor Fuels Agreement. The report is a contribution to Annex XXXV: "Ethanol as a Motor Fuel -- Subtask 1: Ethanol as a Fuel in Road Vehicles." The work has been carried out by The Technical

50

Replacing Motors Counting Savings: Results from a 100 Motor Study  

E-Print Network [OSTI]

REPLACING MOTORS, COUNTING SAVINGS: RESULTS FROM A 100 MOTOR STUDY Nicole M. Kaufman Motor Systems Engineer Advanced Energy Raleigh, NC ABSTRACT Software tools such as MotorMaster+ aid facility personnel in conducting payback... analyses for replacing motors. These tools make assumptions on the motorsí operational efficiency in their calculations. By observing 100 pre-EPCA (Energy Policy & Conservation Act) motors in operation, removing them from service and conducting IEEE...

Kaufman, N. M.

2006-01-01T23:59:59.000Z

51

Hybrid vehicle motor alignment  

DOE Patents [OSTI]

A rotor of an electric motor for a motor vehicle is aligned to an axis of rotation for a crankshaft of an internal combustion engine having an internal combustion engine and an electric motor. A locator is provided on the crankshaft, a piloting tool is located radially by the first locator to the crankshaft. A stator of the electric motor is aligned to a second locator provided on the piloting tool. The stator is secured to the engine block. The rotor is aligned to the crankshaft and secured thereto.

Levin, Michael Benjamin (Ann Arbor, MI)

2001-07-03T23:59:59.000Z

52

Ontario Hydro Motor Efficiency Study  

E-Print Network [OSTI]

Electric motors consume more than one-half of the electrical energy produced by Ontario Hydro. In the residential sector, the major motor load is for refrigerators and freezers while packaged equipment dominate the motor load in the commercial...

Dautovich, D. R.

1980-01-01T23:59:59.000Z

53

Motor Vehicle Record Procedure Objective  

E-Print Network [OSTI]

Motor Vehicle Record Procedure Objective Outline the procedure for obtaining motor vehicle record (MVR) through Fleet Services. Vehicle Operator Policy 3. Operators with 7 or more points on their motor vehicle record

Kirschner, Denise

54

System and method for motor parameter estimation  

DOE Patents [OSTI]

A system and method for determining unknown values of certain motor parameters includes a motor input device connectable to an electric motor having associated therewith values for known motor parameters and an unknown value of at least one motor parameter. The motor input device includes a processing unit that receives a first input from the electric motor comprising values for the known motor parameters for the electric motor and receive a second input comprising motor data on a plurality of reference motors, including values for motor parameters corresponding to the known motor parameters of the electric motor and values for motor parameters corresponding to the at least one unknown motor parameter value of the electric motor. The processor determines the unknown value of the at least one motor parameter from the first input and the second input and determines a motor management strategy for the electric motor based thereon.

Luhrs, Bin; Yan, Ting

2014-03-18T23:59:59.000Z

55

Final Report Phase I Study to Characterize the Market Potential for Non-Motorized Travel  

SciTech Connect (OSTI)

The idea of livable communities suggests that people should have the option to utilize non-motorized travel (NMT), specifically walking and bicycling, to conduct their daily tasks. Forecasting personal travel by walk and bike is necessary as part of regional transportation planning, and requires fine detail not only about individual travel, but also on transportation and neighborhood infrastructure. In an attempt to characterize the 'market' potential for NMT, the Office of Planning, Federal Highway Administration (FHWA) funded the Center for Transportation Analysis (CTA) of the Oak Ridge National Laboratory (ORNL) to conduct a study. The objectives of this effort were to identify factors that influence communities to walk and bike and to examine why, or why not, travelers walk and bike in their communities. This study relied on information collected under the 2009 National Household Travel Survey (NHTS) as the major source of data, and was supplemented with data from the American Community Survey (ACS), educational survey, health, employment, and others. Initial statistical screening methods were applied to sort through over 400 potential predictor variables, and examined with various measures (e.g., walk trip per person, walk mileage per person, bike trip per person, bike mileage per person) as the dependent variables. The best geographic level of detail used in the modeling for this study was determined to be the Census block group level for walking and Census tract level for biking. The need for additional supplemental private data (i.e., Walk Scores and Nielsen employment data), and geospatial information that reflects land use and physical environments, became evident after an examination of findings from the initial screening models. To be feasible, in terms of costs and time, the geographic scale of the study region was scaled down to nine selected NHTS add-on regions. These regions were chosen based on various criteria including transit availability, population size, and a mix of geographic locations across the nation. Given the similarities in modeling results from walk trips and walk mileages, additional modeling efforts conducted under the later part of this study were focused on walk trips per person. Bike models were limited only with the stepwise logistic models using Census tracts in the selected regions. Due to NHTS sampling limitations, only about 12% of these tracts have bike trips recorded from NHTS sampled households. The modeling with NHTS bike data proved to be more challenging and time consuming than what was anticipated. Along with the late arrival of Nielsen employment data, the project team had to limit the modeling effort to focus on walking. Therefore, the final modeling and discriminant analysis was conducted only for walking trips.

Hwang, Ho-Ling [ORNL; Reuscher, Tim [Macrosys; Wilson, Daniel W [ORNL; Schmoyer, Richard L [ORNL

2012-06-01T23:59:59.000Z

56

Justification for Energy Efficient Motors  

E-Print Network [OSTI]

This paper presents the results of a study of Energy Efficient (or EE) motors in NEMA frame sizes, (1-200 HP). It examines the economics of using EE motors for new motor requirements, as replacements for motors - instead of rewinding...

Buschart, R. J.

1981-01-01T23:59:59.000Z

57

Energy Efficient Motors  

E-Print Network [OSTI]

Efficiency is only one aspect of motor performance. This paper discusses how efficiency is influenced by such factors as horsepower rating, poles, actual load, and starting requirements. It discusses some of the variables affecting efficiency...

Hoffmeyer, W.

1982-01-01T23:59:59.000Z

58

Markov Process of Muscle Motors  

E-Print Network [OSTI]

We study a Markov random process describing a muscle molecular motor behavior. Every motor is either bound up with a thin filament or unbound. In the bound state the motor creates a force proportional to its displacement from the neutral position. In both states the motor spend an exponential time depending on the state. The thin filament moves at its velocity proportional to average of all displacements of all motors. We assume that the time which a motor stays at the bound state does not depend on its displacement. Then one can find an exact solution of a non-linear equation appearing in the limit of infinite number of the motors.

Yu. Kondratiev; E. Pechersky; S. Pirogov

2007-06-20T23:59:59.000Z

59

Personal Property  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Guide provides non-regulatory guidance and information to assist DOE organizations and contractors in implementing the DOE-wide and site-specific personal property management programs. It supplements the policy, requirements, and responsibilities information contained in the DOE Order cited above and clarifies the regulatory requirements contained in the Federal Property Management Regulation (FMR) and specific contracts.

2014-10-16T23:59:59.000Z

60

Motor proteins traffic regulation by supply-demand balance of resources  

E-Print Network [OSTI]

In cells and in vitro assays the number of motor proteins involved in biological transport processes is far from being unlimited. The cytoskeletal binding sites are in contact with the same finite reservoir of motors (either the cytosol or the flow chamber) and hence compete for recruiting the available motors, potentially depleting the reservoir and affecting cytoskeletal transport. In this work we provide a theoretical framework to study, analytically and numerically, how motor density profiles and crowding along cytoskeletal filaments depend on the competition of motors for their binding sites. We propose two models in which finite processive motor proteins actively advance along cytoskeletal filaments and are continuously exchanged with the motor pool. We first look at homogeneous reservoirs and then examine the effects of free motor diffusion in the surrounding medium. We consider as a reference situation recent in vitro experimental setups of kinesin-8 motors binding and moving along microtubule filaments in a flow chamber. We investigate how the crowding of linear motor proteins moving on a filament can be regulated by the balance between supply (concentration of motor proteins in the flow chamber) and demand (total number of polymerised tubulin heterodimers). We present analytical results for the density profiles of bound motors, the reservoir depletion, and propose novel phase diagrams that present the formation of jams of motor proteins on the filament as a function of two tuneable experimental parameters: the motor protein concentration and the concentration of tubulins polymerized into cytoskeletal filaments. Extensive numerical simulations corroborate the analytical results for parameters in the experimental range and also address the effects of diffusion of motor proteins in the reservoir.

Luca Ciandrini; I. Neri; Jean-Charles Walter; O. Dauloudet; A. Parmeggiani

2014-09-24T23:59:59.000Z

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

MotorMaster+ International | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

of the capabilities and features of MotorMaster+. However, users can evaluate repairreplacement options on a broader range of motors, including 60 hertz (Hz) motors tested under...

62

Bent shaft motor  

DOE Patents [OSTI]

A nonelectromagnetic motor comprising a base, a bent shaft which is rotatable relative to the base wherein the bent shaft comprises a straight portion aligned with a main axis and an offset portion that is offset with respect to the main axis; and a drive means for driving the offset portion of the bent shaft along a generally circular path in a plane perpendicular to the main axis to rotate the bent shaft. The bent shaft and drive means for driving the bent shaft can be selected from piezoelectric, magnetostrictive, rheological and shape memory alloys. The drive means of the nonelectromagnetic motor can additionally comprise a shell which shell surrounds and houses the bent shaft and precesses or gyrates which in turn causes the bent drive shaft to rotate. The nonelectromagnetic motor does not rely on friction for the application of torque upon a rotor. 11 figs.

Benavides, G.L.

1998-05-05T23:59:59.000Z

63

Bent shaft motor  

DOE Patents [OSTI]

A nonelectromagnetic motor comprising a base, a bent shaft which is rotable relative to the base wherein the bent shaft comprises a straight portion aligned with a main axis and an offset portion that is offset with respect to the main axis; and a drive means for driving the offset portion of the bent shaft along a generally circular path in a plane perpendicular to the main axis to rotate the bent shaft. The bent shaft and drive means for driving the bent shaft can be selected from piezoelectric, magnetostrictive, rheological and shape memory alloys. The drive means of the nonelectromagnetic motor can additionally comprise a shell which shell surrounds and houses the bent shaft and precesses or gyrates which in turn causes the bent drive shaft to rotate. The nonelectromagnetic motor does not rely on friction for the application of torque upon a rotor.

Benavides, Gilbert L. (Albuquerque, NM)

1998-01-01T23:59:59.000Z

64

Motor current signature analysis method for diagnosing motor operated devices  

DOE Patents [OSTI]

A motor current noise signature analysis method and apparatus for remotely monitoring the operating characteristics of an electric motor-operated device such as a motor-operated valve. Frequency domain signal analysis techniques are applied to a conditioned motor current signal to distinctly identify various operating parameters of the motor driven device from the motor current signature. The signature may be recorded and compared with subsequent signatures to detect operating abnormalities and degradation of the device. This diagnostic method does not require special equipment to be installed on the motor-operated device, and the current sensing may be performed at remote control locations, e.g., where the motor-operated devices are used in accessible or hostile environments.

Haynes, Howard D. (Kingston, TN); Eissenberg, David M. (Oak Ridge, TN)

1990-01-01T23:59:59.000Z

65

Design and prototyping methods for brushless motors and motor control  

E-Print Network [OSTI]

In this report, simple, low-cost design and prototyping methods for custom brushless permanent magnet synchronous motors are explored. Three case-study motors are used to develop, illustrate and validate the methods. Two ...

Colton, Shane W. (Shane William)

2010-01-01T23:59:59.000Z

66

Efficient, Inexpensive Motors: A New Trend in The Motors Market  

E-Print Network [OSTI]

EFFICIENT, INEXPENSIVE MOTORS: A NEW TREND IN THE MOTORS MARKET Ronald G. Wroblewski, P.E. Trainer and Consultant ABSTRACT The Consortiwn for Energy Efficiency (CEE) has established criteria for premium-efficiency motors above the EPACf... standard. CEE has set a wrifonn efficiency benchmark that all market players (manufacturers, utilities, and end-users) can use. Some end-users however, have been reluctant to specify these motors because they think they are too expensive...

Wroblewksi, R. G.

67

The impacts of molecular motor traffic jams Jennifer L. Ross1  

E-Print Network [OSTI]

. So, too, in the cell, much time and energy is expended on shuttling organ- elles, protein complexes, the motor proteins and microtubules ensure the temporal and spatial demands for on-time delivery of cargos trans- port provided by the microtubule­motor network inside cells. When intracellular transport breaks

Ross, Jennifer

68

Method for assessing motor insulation on operating motors  

DOE Patents [OSTI]

A method for monitoring the condition of electrical-motor-driven devices. The method is achieved by monitoring electrical variables associated with the functioning of an operating motor, applying these electrical variables to a three phase equivalent circuit and determining non-symmetrical faults in the operating motor based upon symmetrical components analysis techniques.

Kueck, John D. (Oak Ridge, TN); Otaduy, Pedro J. (Oak Ridge, TN)

1997-01-01T23:59:59.000Z

69

Method for assessing motor insulation on operating motors  

DOE Patents [OSTI]

A method for monitoring the condition of electrical-motor-driven devices is disclosed. The method is achieved by monitoring electrical variables associated with the functioning of an operating motor, applying these electrical variables to a three phase equivalent circuit and determining non-symmetrical faults in the operating motor based upon symmetrical components analysis techniques. 15 figs.

Kueck, J.D.; Otaduy, P.J.

1997-03-18T23:59:59.000Z

70

Electric motor model repair specifications  

SciTech Connect (OSTI)

These model repair specifications list the minimum requirements for repair and overhaul of polyphase AC squireel cage induction motors. All power ranges, voltages, and speeds of squirrel cage motors are covered.

NONE

1995-08-01T23:59:59.000Z

71

Evaluating High Efficiency Motor Retrofit  

E-Print Network [OSTI]

In the petrochemical and refining Industries, and most manufacturing plants, the reliable operation of AC motors always has been crucial to the continuous operation of the process. Now, the cost of operating these motors has also become a...

Evans, T. A.

1984-01-01T23:59:59.000Z

72

Design and performance evaluation of an electric go-kart and custom permanent magnet brushless DC motor  

E-Print Network [OSTI]

This undergraduate thesis documents the design considerations and specifications of building a personal battery-powered go-kart. This includes designing and building a custom brushless DC motor for use in the drivetrain. ...

Davis, Eli Marc

2012-01-01T23:59:59.000Z

73

Magazine R729 Motor prediction  

E-Print Network [OSTI]

Magazine R729 Primer Motor prediction Daniel M. Wolpert* and J. Randall Flanagan The concept of motor prediction was first considered by Helmholtz when trying to understand how we localise visual position of the eye, predicted the gaze position based on a copy of the motor command acting on the eye

Flanagan, Randy

74

RMP Colloquia Modeling molecular motors  

E-Print Network [OSTI]

The authors present general considerations and simple models for the operation of isothermal motors at small structural differences from the usual Carnot engines. Turning to more explicit models for a single motorRMP Colloquia Modeling molecular motors Frank Ju®licher,* Armand Ajdari, and Jacques Prost

JŁlicher, Frank

75

Fiscal decentralization and urban public transport  

E-Print Network [OSTI]

Financing public transport through public funds is a common practice that can be justified on different grounds: equity, natural monopoly and, particularly with the increasing motorization rate, externalities produced by ...

Favero, Giorgia

2006-01-01T23:59:59.000Z

76

Dualmode transportation - impact on the electric grid  

E-Print Network [OSTI]

Continual increase in transport demand and uneven road capacity results in chaotic traffic congestion, brings with it high levels of air pollution, an elevated number of accidents, and an insatiable demand for oil to satisfy the motorized vehicles...

Azcarate Lara, Francisco Javier

2009-05-15T23:59:59.000Z

77

Dualmode transportation - impact on the electric grid  

E-Print Network [OSTI]

Continual increase in transport demand and uneven road capacity results in chaotic traffic congestion, brings with it high levels of air pollution, an elevated number of accidents, and an insatiable demand for oil to satisfy the motorized vehicles...

Azcarate Lara, Francisco Javier

2008-10-10T23:59:59.000Z

78

Transportation of Natural Gas and Petroleum (Nebraska)  

Broader source: Energy.gov [DOE]

This statute enables and regulates the exercise of eminent domain by persons, companies, corporations, or associations transporting crude oil, petroleum, gases, or other products within or through...

79

E-Print Network 3.0 - affect mass transport Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Suprieure Collection: Physics 37 Human Services Transportation Plan "INCREASING INTERCONNECTIVITY THROUGH MOBILITY AND ACCESS" Summary: persons and persons with disabilities. FTA...

80

Stabilizer for motor vehicle  

SciTech Connect (OSTI)

This patent describes a stabilizer for a motor vehicle comprising: a rod-shaped torsion section extending in the transverse direction of a motor vehicle; a pair of arm sections continuous with both ends of the torsion section and extending in the longitudinal direction of the motor vehicle; a first member attached to the torsion section or at least one of the arm sections and formed with an axially penetrating cylindrical bore; a columnar second member inserted in the bore of the first member; at least one coil spring disposed between the inner peripheral surface of the bore of the first member and the outer peripheral surface of the second member and wound around the second member, at least one end of the coil spring being a free end; an operating member connected to the free end of the coil spring, at least a part of the operating member being located outside the first member; and drive means coupled to the operating member and adapted to apply a force in a direction such that the diameter of the coil spring is increased or reduced.

Takadera, I.; Kuroda, S.

1986-11-11T23:59:59.000Z

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Stepping and crowding of molecular motors: statistical kinetics from an exclusion process perspective  

E-Print Network [OSTI]

Motor enzymes are remarkable molecular machines that use the energy derived from the hydrolysis of a nucleoside triphosphate to generate mechanical movement, achieved through different steps that constitute their kinetic cycle. These macromolecules, nowadays investigated with advanced experimental techniques to unveil their molecular mechanisms and the properties of their kinetic cycles, are implicated in many biological processes, ranging from biopolymerisation (e.g. RNA polymerases and ribosomes) to intracellular transport (motor proteins such as kinesins or dyneins). Although the kinetics of individual motors is well studied on both theoretical and experimental grounds, the repercussions of their stepping cycle on the collective dynamics still remains unclear. Advances in this direction will improve our comprehension of transport process in the natural intracellular medium, where processive motor enzymes might operate in crowded conditions. In this work, we therefore extend the current statistical kinetic analysis to study collective transport phenomena of motors in terms of lattice gas models belonging to the exclusion process class. Via numerical simulations, we show how to interpret and use the randomness calculated from single particle trajectories in crowded conditions. Importantly, we also show that time fluctuations and non-Poissonian behavior are intrinsically related to spatial correlations and the emergence of large, but finite, clusters of co-moving motors. The properties unveiled by our analysis have important biological implications on the collective transport characteristics of processive motor enzymes in crowded conditions.

Luca Ciandrini; M. Carmen Romano; A. Parmeggiani

2014-05-26T23:59:59.000Z

82

September 1996 Personal Statement  

E-Print Network [OSTI]

the value of the personal statement as an indicator of writing ability. A Look at the Data The data showSeptember 1996 Personal Statement: A Writing Sample? Uses of the Personal Statement The personal to learn about an applicant's personal characteristics, to match interests between advisors and students

Chatterjee, Avik P.

83

Life Cycle Regulation of Transportation Fuels: Uncertainty and its Policy Implications  

E-Print Network [OSTI]

4.4.9. Fuel ethanol production . . . . . .2008 motor gasoline and fuel ethanol use for transportation123. Pimentel, D. (1991). Ethanol fuels - energy security,

Plevin, Richard Jay

2010-01-01T23:59:59.000Z

84

Assessing Transportation Disadvantage and Public Transportation Opportunites in Rural Ontario: A Case Study of Huron County .  

E-Print Network [OSTI]

??In virtually all rural areas in Ontario the limited transportation alternatives means that rural residents without access to a personal vehicle are at great riskÖ (more)

Marr, Eric

2012-01-01T23:59:59.000Z

85

How to Build a Motor  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Motor Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects & Initiatives Expand Projects & Initiatives Finance & Rates Expand...

86

Motor Repair Tech Brief  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d F S i DOE TribaltheMyMinutesDepartmentCharacteristics | Motor Repair

87

MOTOR FLEET MANAGEMENT REGULATIONS  

E-Print Network [OSTI]

............................................................12 D. PREVENTIVE MAINTENANCE...........................................12 E. REPAIRS AND MAINTENANCE......................................10 D. TRANSPORTATION TO AND FROM MFM FACILITIES.11 VI. MAINTENANCE AND CARE OF VEHICLES. ROUTINE MAINTENANCE..................................................12 C. VEHICLE WASHING

Howitt, Ivan

88

Developing a Motor Management Policy at BASF  

E-Print Network [OSTI]

In early 1998 Thomas R. Theising, BASF Corporate Engineering initiated the formation of a motor management team. The goal of the team was to develop a Motor Management Guideline to better manage the purchase and repair of motors used throughout...

Zickefoose, B.; Theising, T. R.

89

Industrial motor repair in the United States  

SciTech Connect (OSTI)

This report characterizes the motor repair industry in the United States; summarizes current motor repair and testing practice; and identifies barriers to energy motor repair practice and recommends strategies for overcoming those barriers.

Schueler, V.; Leistner, P.; Douglass, J.

1994-09-01T23:59:59.000Z

90

Verification of Motor Repair Quality  

E-Print Network [OSTI]

Motor testing at Advanced Energy has shown that a motor that has not suffered irreparable damage as a result of failure can be repaired to perform as well as before the failure. But the only way to achieve the performance level of an energy...

Butler, K.

91

Personal Services Agreements Waivers  

E-Print Network [OSTI]

, State Controller's Office). All personal services contract activity will be reported through the state

92

Piezoelectric wave motor  

DOE Patents [OSTI]

A piezoelectric motor having a stator in which piezoelectric elements are contained in slots formed in the stator transverse to the desired wave motion. When an electric field is imposed on the elements, deformation of the elements imposes a force perpendicular to the sides of the slot, deforming the stator. Appropriate frequency and phase-shifting of the electric field will produce a wave in the stator and motion in a rotor. In a preferred aspect, the piezoelectric elements are configured so that deformation of the elements in the direction of an imposed electric field, generally referred to as the d.sub.33 direction, is utilized to produce wave motion in the stator. In a further aspect, the elements are compressed into the slots so as to minimize tensile stresses on the elements in use.

Yerganian, Simon Scott (Lee's Summit, MO)

2003-02-11T23:59:59.000Z

93

Piezoelectric wave motor  

DOE Patents [OSTI]

A piezoelectric motor having a stator in which piezoelectric elements are contained in slots formed in the stator transverse to the desired wave motion. When an electric field is imposed on the elements, deformation of the elements imposes a force perpendicular to the sides of the slot, deforming the stator. Appropriate frequency and phase shifting of the electric field will produce a wave in the stator and motion in a rotor. In a preferred aspect, the piezoelectric elements are configured so that deformation of the elements in direction of an imposed electric field, generally referred to as the d.sub.33 direction, is utilized to produce wave motion in the stator. In a further aspect, the elements are compressed into the slots so as to minimize tensile stresses on the elements in use.

Yerganian, Simon Scott (Lee's Summit, MO)

2001-07-17T23:59:59.000Z

94

Submersible canned motor transfer pump  

DOE Patents [OSTI]

A transfer pump used in a waste tank for transferring high-level radioactive liquid waste from a waste tank and having a column assembly, a canned electric motor means, and an impeller assembly with an upper impeller and a lower impeller connected to a shaft of a rotor assembly. The column assembly locates a motor housing with the electric motor means adjacent to the impeller assembly which creates an hydraulic head, and which forces the liquid waste, into the motor housing to cool the electric motor means and to cool and/or lubricate the radial and thrust bearing assemblies. Hard-on-hard bearing surfaces of the bearing assemblies and a ring assembly between the upper impeller and electric motor means grind large particles in the liquid waste flow. Slots in the static bearing member of the radial bearing assemblies further grind down the solid waste particles so that only particles smaller than the clearances in the system can pass therethrough, thereby resisting damage to and the interruption of the operation of the transfer pump. The column assembly is modular so that sections can be easily assembled, disassembled and/or removed. A second embodiment employs a stator jacket which provides an alternate means for cooling the electric motor means and lubricating and/or cooling the bearing assemblies, and a third embodiment employs a variable level suction device which allows liquid waste to be drawn into the transfer pump from varying and discrete levels in the waste tank.

Guardiani, Richard F. (Ohio Township, Allegheny County, PA); Pollick, Richard D. (Sarver, PA); Nyilas, Charles P. (Monroeville, PA); Denmeade, Timothy J. (Lower Burrell, PA)

1997-01-01T23:59:59.000Z

95

Submersible canned motor mixer pump  

DOE Patents [OSTI]

A mixer pump used in a waste tank for mobilizing high-level radioactive liquid waste having a column assembly containing power cables, a motor housing with electric motor means which includes a stator can of a stator assembly and a rotor can of a rotor assembly, and an impeller assembly with an impeller connected to a shaft of the rotor assembly. The column assembly locates the motor housing with the electric motor means adjacent to the impeller which creates an hydraulic head, and which forces the liquid waste into the motor housing to cool the electric motor means and to lubricate radial and thrust bearing assemblies. Hard-on-hard bearing surfaces of the bearing assemblies and a ring assembly between the impeller and electric motor means act to grind down large particles in the liquid waste flow. These larger particles are received in slots in the static bearing members of the radial bearing assemblies. Only solid waste particles smaller than the clearances in the system can pass therethrough, thereby resisting damage to and the interruption of the operation of the mixer pump.

Guardiani, Richard F. (Ohio Township, PA); Pollick, Richard D. (Sarver, PA)

1997-01-01T23:59:59.000Z

96

Submersible canned motor mixer pump  

DOE Patents [OSTI]

A mixer pump is described used in a waste tank for mobilizing high-level radioactive liquid waste having a column assembly containing power cables, a motor housing with electric motor means which includes a stator can of a stator assembly and a rotor can of a rotor assembly, and an impeller assembly with an impeller connected to a shaft of the rotor assembly. The column assembly locates the motor housing with the electric motor means adjacent to the impeller which creates an hydraulic head, and which forces the liquid waste into the motor housing to cool the electric motor means and to lubricate radial and thrust bearing assemblies. Hard-on-hard bearing surfaces of the bearing assemblies and a ring assembly between the impeller and electric motor means act to grind down large particles in the liquid waste flow. These larger particles are received in slots in the static bearing members of the radial bearing assemblies. Only solid waste particles smaller than the clearances in the system can pass there through, thereby resisting damage to and the interruption of the operation of the mixer pump. 10 figs.

Guardiani, R.F.; Pollick, R.D.

1997-10-07T23:59:59.000Z

97

Topic 7 Organization of Motor System -Cortical Motor Areas  

E-Print Network [OSTI]

Cartoon, 1986 Electrical stimulation produces movement of contralateral body parts. #12;4 Motor Homunculus previous stimulation technique · Insert electrode into cortical layer V and use electrical stimulation" somatotopic map vs "more complex" map #12;

Sergio, Lauren E.

98

Parking and Transportation Service 1117 E. 6th  

E-Print Network [OSTI]

Parking and Transportation Service 1117 E. 6th Street Tucson, Arizona 85721 BICYCLE (AND NON-MOTORIZED TRANSPORTATION) Parking & Traffic Regulations 2011-2012 It is the responsibility of all individuals walking. For additional information, please call: Administration 621-3550 Alternative Transportation 626-RIDE Customer

Utzinger, Urs

99

Fluctuation effects in bidirectional cargo transport  

E-Print Network [OSTI]

We discuss a theoretical model for bidirectional cargo transport in biological cells, which is driven by teams of molecular motors and subject to thermal fluctuations. The model describes explicitly the directed motion of the molecular motors on the filament. The motor-cargo coupling is implemented via linear springs. By means of extensive Monte Carlo simulations we show that the model describes the experimentally observed regimes of anomalous diffusion, i.e. subdiffusive behavior at short times followed by superdiffusion at intermediate times. The model results indicate that subdiffuse regime is induced by thermal fluctuations while the superdiffusive motion is generated by correlations of the motors' activity. We also tested the efficiency of bidirectional cargo transport in crowded areas by measuring its ability to pass barriers with increased viscosity. Our results show a remarkable gain of efficiency for high viscosities.

Sarah Klein; Cťcile Appert-Rolland; Ludger Santen

2014-09-27T23:59:59.000Z

100

Recover Power with Hydraulic Motors  

E-Print Network [OSTI]

displacement device, the HPRM torque and speed are almost completely independent - unlike hydraulic power recovery turbines (centrifugal motors). Three screw HPRM's have low moments of inertia, operate at low vibration and noise levels and extract power...

Brennan, J. R.

1982-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Rotary Electrodynamics of a DC Motor: Motor as Mechanical Capacitor Lab 2: Modeling and System Identification  

E-Print Network [OSTI]

). · im is the current through the motor. Because the motor is in series with all other electrical). Because power is conserved, m = Kmim (motor efficiency is actually closer to 69%). Here, Km 0.00767 VRotary Electrodynamics of a DC Motor: Motor as Mechanical Capacitor Lab 2: Modeling and System

102

The Future Energy and GHG Emissions Impact of Alternative Personal  

E-Print Network [OSTI]

The Future Energy and GHG Emissions Impact of Alternative Personal Transportation Pathways in China://globalchange.mit.edu/ Printed on recycled paper #12;The Future Energy and GHG Emissions Impact of Alternative Personal Paul N. Kishimoto, Sergey Paltsev and Valerie J. Karplus Report No. 231 September 2012 China Energy

103

Segmented rail linear induction motor  

DOE Patents [OSTI]

A segmented rail linear induction motor has a segmented rail consisting of a plurality of nonferrous electrically conductive segments aligned along a guideway. The motor further includes a carriage including at least one pair of opposed coils fastened to the carriage for moving the carriage. A power source applies an electric current to the coils to induce currents in the conductive surfaces to repel the coils from adjacent edges of the conductive surfaces.

Cowan, Jr., Maynard (1107 Stagecoach Rd. SE., Albuquerque, NM 87123); Marder, Barry M. (1412 Pinnacle View Dr. NE., Albuquerque, NM 87123)

1996-01-01T23:59:59.000Z

104

Segmented rail linear induction motor  

DOE Patents [OSTI]

A segmented rail linear induction motor has a segmented rail consisting of a plurality of nonferrous electrically conductive segments aligned along a guideway. The motor further includes a carriage including at least one pair of opposed coils fastened to the carriage for moving the carriage. A power source applies an electric current to the coils to induce currents in the conductive surfaces to repel the coils from adjacent edges of the conductive surfaces. 6 figs.

Cowan, M. Jr.; Marder, B.M.

1996-09-03T23:59:59.000Z

105

Direct drive field actuator motors  

DOE Patents [OSTI]

A positive-drive field actuator motor is described which includes a stator carrying at least one field actuator which changes in dimension responsive to application of an energy field, and at least one drive shoe movable by the dimensional changes of the field actuator to contact and move a rotor element with respect to the stator. Various embodiments of the motor are disclosed, and the rotor element may be moved linearly or arcuately. 62 figs.

Grahn, A.R.

1998-03-10T23:59:59.000Z

106

A linear induction motor conveyer  

E-Print Network [OSTI]

A LINEAR INCUCTION MOTOR CONVEYER A Thesis Kenneth Sheldon. Solinsky Submitted to the Graduate College of Texas AkM University in partial fulfillment of the requirement for the degree of MASTER 07 SCIENCE May 1973 Major Subject: Industrial.... Howie, USAMC-ITC-P/P, Red River Army Depot, Texarkana, Texas 75501. Approved owxe, xe , ro uc o uction Engineering For the Commander ne , grec or, I A LINEAR INDUCTION MOTOR CONVEYER A Thesis by Kenneth Sheldon Solinsky App ved as to style...

Solinsky, Kenneth Sheldon

1973-01-01T23:59:59.000Z

107

Transportation and the Environment: Essays on Technology, Infrastructure, and Policy  

E-Print Network [OSTI]

Most locomotives used in the U.S. are diesel-electric.They use a diesel engine to power electric motors that driveElectric Transportation Systems and Electro-Motive Diesel (

Sangkapichai, Mana

2009-01-01T23:59:59.000Z

108

Personal Data Vault: A Privacy Architecture for Mobile Personal Sensing  

E-Print Network [OSTI]

A The Detailed View of Personal Data Vault UCLA Ė UCR ĖEmbedded Networked Sensing Personal Data Vault: a privacyRequired. Proposed Solution: Personal Data Vault, A Privacy

2009-01-01T23:59:59.000Z

109

Persons, imposters, and monsters  

E-Print Network [OSTI]

This dissertation is about person features, their representation and interpretation in natural language. I will argue that there are several ways in which person features can be represented and interpreted. Most importantly, ...

Podobryaev, Alexander

2014-01-01T23:59:59.000Z

110

Fact #747: October 1, 2012 Behind Housing, Transportation is...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

household expenditures on housing, transportation, food, personal insurance and pensions, health care, entertainment, apparel and services, and other. See table below for more...

111

PERSONAL DATA : / / (Attach Photo)  

E-Print Network [OSTI]

PERSONAL DATA : / / (Attach Photo) Passport / Please fill out in English Passport No Issued /TEL: /Mail : Spouse No Yes residing in Japan Not residing in Japan #12;PERSONAL DATA : / / Contact person & address in your country / Please fill out in English Name Relationship with you

Ejiri, Shinji

112

Submersible canned motor transfer pump  

DOE Patents [OSTI]

A transfer pump is described which is used in a waste tank for transferring high-level radioactive liquid waste from a waste tank and having a column assembly, a canned electric motor means, and an impeller assembly with an upper impeller and a lower impeller connected to a shaft of a rotor assembly. The column assembly locates a motor housing with the electric motor means adjacent to the impeller assembly which creates an hydraulic head, and which forces the liquid waste, into the motor housing to cool the electric motor means and to cool and/or lubricate the radial and thrust bearing assemblies. Hard-on-hard bearing surfaces of the bearing assemblies and a ring assembly between the upper impeller and electric motor means grind large particles in the liquid waste flow. Slots in the static bearing member of the radial bearing assemblies further grind down the solid waste particles so that only particles smaller than the clearances in the system can pass there through, thereby resisting damage to and the interruption of the operation of the transfer pump. The column assembly is modular so that sections can be easily assembled, disassembled and/or removed. A second embodiment employs a stator jacket which provides an alternate means for cooling the electric motor means and lubricating and/or cooling the bearing assemblies, and a third embodiment employs a variable level suction device which allows liquid waste to be drawn into the transfer pump from varying and discrete levels in the waste tank. 17 figs.

Guardiani, R.F.; Pollick, R.D.; Nyilas, C.P.; Denmeade, T.J.

1997-08-19T23:59:59.000Z

113

Electric motors: Markets, trends, and applications  

SciTech Connect (OSTI)

Electric motors play an important role in nearly all sectors of the US economy. Typical motor applications range from air conditioning and appliances in the residential sector, to cooling and space heating in the commercial sector, to materials handling and processing in the industrial sectors. Motors in the residential sector consumed nearly 352 billion kilowatthours (BkWh) in 1985, in the commercial sector 279 BkWh, and the industrial sector 552 BkWh. Approximately 87% of electric motor electricity use in the industrial sector was consumed in manufacturing processes, while the process industries consumed more than half of the manufacturing sector's electric motor electricity use. The total motor population in all sectors in 1987 stood just shy of 1.02 billion, 90% of which are less than one horsepower (HP) in size. An increasing percentage of the motor population is comprised of high efficiency motors, as classified by the National Electrical Manufacturers Association (NEMA). High efficiency motors offer end-users greater energy and cost savings than do their standard efficiency counterparts. This report provides an overview of the history of the electric motor, a brief description of the electromechanical theory behind motor operations, and offers a statistical review of the size and distribution of the electric motor market. The report also presents data on sector motor electricity use, describes current and potential motor application opportunities, and details areas in which further research and development may be needed.

Not Available

1992-06-01T23:59:59.000Z

114

United States Industrial Electric Motor Systems Market Opportunities...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

for Industry MotorMaster+ User Manual New Motor Systems Market Assessment AMO and LBNL are currently developing an update to the original Motor Systems Market Assessment. The...

115

Three phase AC motor controller  

DOE Patents [OSTI]

A motor controller for a three phase AC motor (10) which is adapted to operate bidirectionally from signals received either from a computer (30) or a manual control (32). The controller is comprised of digital logic circuit means which implement a forward and reverse command signal channel (27, 29) for the application of power through the forward and reverse power switching relays (16, 18, 20, 22). The digital logic elements are cross coupled to prevent activation of both channels simultaneously and each includes a plugging circuit (65, 67) for stopping the motor upon the removal of control signal applied to one of the two channels (27, 29) for a direction of rotation desired. Each plugging circuit (65, 67) includes a one-shot pulse signal generator (88, 102) which outputs a single pulse signal of predetermined pulsewidth which is adapted to inhibit further operation of the application of power in the channel which is being activated and to apply a reversal command signal to the other channel which provides a reversed phase application of power to the motor for a period defined by the pulse-width output of the one-shot signal generator to plug the motor (10) which will then be inoperative until another rotational command signal is applied to either of the two channels.

Vuckovich, Michael (Elizabeth, PA); Wright, Maynard K. (Bethel Park, PA); Burkett, John P. (South Huntington Township, Westmoreland County, PA)

1984-03-20T23:59:59.000Z

116

Case Histories of Energy Efficient Motors  

E-Print Network [OSTI]

should be the value read from a reputable manufactur er I s data sheet. COOLING TOWER MOTORS The plant is now replacing 25 hp cooling tower motors with EE motors as the old ones burn out. An adapter base for changing from the old frame size 365... volts and amps from an EE motor and comparing this to readings from an old motor in service on the tower. This was based on an assumption of identical loads and motor power factors. This calculation showed yearly savings very close to the cost...

Riley, J. C.; Comiskey, W. T

117

Thermoelectric generator for motor vehicle  

DOE Patents [OSTI]

A thermoelectric generator for producing electric power for a motor vehicle from the heat of the exhaust gasses produced by the engine of the motor vehicle. The exhaust gasses pass through a finned heat transfer support structure which has seat positions on its outside surface for the positioning of thermoelectric modules. A good contact cylinder provides a framework from which a spring force can be applied to the thermoelectric modules to hold them in good contact on their seats on the surface of the heat transfer support structure.

Bass, John C. (6121 La Pintra Dr., La Jolla, CA 92037)

1997-04-29T23:59:59.000Z

118

Homopolar motor with dual rotors  

DOE Patents [OSTI]

A homopolar motor has a field rotor mounted on a frame for rotation in a first rotational direction and for producing an electromagnetic field, and an armature rotor mounted for rotation on said frame within said electromagnetic field and in a second rotational direction counter to said first rotational direction of said field rotor. The two rotors are coupled through a 1:1 gearing mechanism, so as to travel at the same speed but in opposite directions. This doubles the output voltage and output power, as compared to a motor in which only the armature is rotated. Several embodiments are disclosed. 7 figs.

Hsu, J.S.

1998-12-01T23:59:59.000Z

119

Thermoelectric generator for motor vehicle  

SciTech Connect (OSTI)

A thermoelectric generator is described for producing electric power for a motor vehicle from the heat of the exhaust gases produced by the engine of the motor vehicle. The exhaust gases pass through a finned heat transfer support structure which has seat positions on its outside surface for the positioning of thermoelectric modules. A good contact cylinder provides a framework from which a spring force can be applied to the thermoelectric modules to hold them in good contact on their seats on the surface of the heat transfer support structure. 8 figs.

Bass, J.C.

1997-04-29T23:59:59.000Z

120

Writing Motor Specifications - How to Include Efficiency  

E-Print Network [OSTI]

The escalating cost of electric power coupled with the rapid depletion of our non-renewable resources makes consideration of motor efficiency good sense both from economic and conservation viewpoints. The efficiency of an electric motor can...

Quartermaine, B. J.

1980-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Impact of Motor Failures on Payback Periods  

E-Print Network [OSTI]

This paper uses MotorMaster and Vaughen's Complete Price Guide to determine payback periods for different motor failure scenarios. Some scenarios considered are rewinds, reconditions, and replacement of bearings. Prices for these repairs...

Cheek, K. F.; Pillay, P.; Dudley, K. J.

122

Application Guidelines for Energy Efficient Motors  

E-Print Network [OSTI]

Rapidly rising power costs have prompted industrial motor users to consider specifying motors having efficiencies higher than the norm. Blanket specifications calling out high efficiency units for all applications can result in extended deliveries...

Cowern, E. H.

1983-01-01T23:59:59.000Z

123

Self-bearing motor design & control  

E-Print Network [OSTI]

This thesis presents the design, implementation and control of a new class of self-bearing motors. The primary thesis contributions include the design and experimental demonstration of hysteresis self-bearing motors, novel ...

Imani Nejad, Mohammad

2013-01-01T23:59:59.000Z

124

Motor Energy Saving Opportunities in an Industrial Plant  

E-Print Network [OSTI]

Industrial plants have enormous energy saving opportunities with electric motors. Improving motor efficiency is a conventional wisdom to save energy. Re-engineering affords far greater savings opportunities than motor efficiency improvement. Motor...

Kumar, B.; Elwell, A.

125

Frequency modulation drive for a piezoelectric motor  

DOE Patents [OSTI]

A piezoelectric motor has peak performance at a specific frequency f.sub.1 that may vary over a range of frequencies. A drive system is disclosed for operating such a motor at peak performance without feedback. The drive system consists of the motor and an ac source connected to power the motor, the ac source repeatedly generating a frequency over a range from f.sub.1 -.DELTA.x to f.sub.1 +.DELTA.y.

Mittas, Anthony (Albuquerque, NM)

2001-01-01T23:59:59.000Z

126

A Novel Approach to Determining Motor Load  

E-Print Network [OSTI]

A NOVEL APPROACH TO DETERMINING MOTOR LOAD by Michael Brown Georgia Tech Research Institute Atlanta, Georgia ABSTRACf Properly sized electric motors are essential if industrial plant efficiency is to be optimized and energy costs... minimized. Because of the difficully in making power measurements on three phase motors, loading is rarely, if ever, checked. A simple indication of motor load can be achieved by measuring operating speed because speed and load are almost linearly...

Brown, M.

127

Psykopater och psykotiska personer.  

E-Print Network [OSTI]

?? I Sverige begŚs ungefšr vart tionde vŚldsbrott av personer i psykos och ca 40 procent av de brottslingar som šr dŲmda fŲr grova vŚldsbrottÖ (more)

Everstig, Cecilia

2007-01-01T23:59:59.000Z

128

Curriculum Vitae Personal Data  

E-Print Network [OSTI]

Curriculum Vitae 1 Personal Data Name : Dudy Darmawan Wijaya Place/Date of Birth : Bandung. Thesis: "Monitoring volcano deformation using GPS Method" #12;Curriculum Vitae 2 Working

Schuh, Harald

129

Conducting a Motor Survey: Key Step for Establishing a Motor Management Policy  

E-Print Network [OSTI]

Roughly 70% of the energy consumed by manufacturing processes is used by electric motors. According to the U.S. Department of Energy, greater attention to motor systems management can reduce motor-related energy costs by 18%. Establishing a motor...

Miller, R. B.

130

PNNL Coal Gasifier Transportation Logistics  

SciTech Connect (OSTI)

This report provides Pacific Northwest National laboratory (PNNL) craftspeople with the necessary information and suggested configurations to transport PNNLís coal gasifier from its current location at the InEnTec facility in Richland, Washington, to PNNLís Laboratory Support Warehouse (LSW) for short-term storage. A method of securing the gasifier equipment is provided that complies with the tie-down requirements of the Federal Motor Carrier Safety Administrationís Cargo Securement Rules.

Reid, Douglas J.; Guzman, Anthony D.

2011-04-13T23:59:59.000Z

131

Electric Motor What happens if we put  

E-Print Network [OSTI]

Electric Motor What happens if we put a loop of wire carrying a current in a B field ? FB on opposite sides of the loop produce a torque on the loop causing it to rotate. Electric motor ­ a commutator. #12;Electric Motor Define normal n to plane using right-hand rule Torque tends to rotate loop to align

Bertulani, Carlos A. - Department of Physics and Astronomy, Texas A&M University

132

Transportation Statistics Annual Report 1997  

SciTech Connect (OSTI)

This document is the fourth Transportation Statistics Annual Report (TSAR) prepared by the Bureau of Transportation Statistics (BTS) for the President and Congress. As in previous years, it reports on the state of U.S. transportation system at two levels. First, in Part I, it provides a statistical and interpretive survey of the systemóits physical characteristics, its economic attributes, aspects of its use and performance, and the scale and severity of unintended consequences of transportation, such as fatalities and injuries, oil import dependency, and environment impacts. Part I also explores the state of transportation statistics, and new needs of the rapidly changing world of transportation. Second, Part II of the report, as in prior years, explores in detail the performance of the U.S. transportation system from the perspective of desired social outcomes or strategic goals. This year, the performance aspect of transportation chosen for thematic treatment is ďMobility and Access,Ē which complements past TSAR theme sections on ďThe Economic Performance of TransportationĒ (1995) and ďTransportation and the EnvironmentĒ (1996). Mobility and access are at the heart of the transportation systemís performance from the userís perspective. In what ways and to what extent does the geographic freedom provided by transportation enhance personal fulfillment of the nationís residents and contribute to economic advancement of people and businesses? This broad question underlies many of the topics examined in Part II: What is the current level of personal mobility in the United States, and how does it vary by sex, age, income level, urban or rural location, and over time? What factors explain variations? Has transportation helped improve peopleís access to work, shopping, recreational facilities, and medical services, and in what ways and in what locations? How have barriers, such as age, disabilities, or lack of an automobile, affected these accessibility patterns? How are commodity flows and transportation services responding to global competition, deregulation, economic restructuring, and new information technologies? How do U.S. patterns of personal mobility and freight movement compare with other advanced industrialized countries, formerly centrally planned economies, and major newly industrializing countries? Finally, how is the rapid adoption of new information technologies influencing the patterns of transportation demand and the supply of new transportation services? Indeed, how are information technologies affecting the nature and organization of transportation services used by individuals and firms?

Fenn, M.

1997-01-01T23:59:59.000Z

133

Analysis of synthetic motor oils for additive elements by ICP-AES  

SciTech Connect (OSTI)

Standard motor oils are made by blending paraffinic or naphthenic mineral oil base stocks with additive packages containing anti-wear agents, dispersants, corrosion inhibitors, and viscosity index improvers. The blender can monitor the correct addition of the additives by determining the additive elements in samples dissolved in a solvent by ICP-AES. Internal standardization is required to control sample transport interferences due to differences in viscosity between samples and standards. Synthetic motor oils, made with poly-alpha-olefins and trimethylol propane esters, instead of mineral oils, pose an additional challenge since these compounds affect the plasma as well as having sample transport interference considerations. The synthetic lubricant base stocks add significant oxygen to the sample matrix, which makes the samples behave differently than standards prepared in mineral oil. Determination of additive elements in synthetic motor oils will be discussed.

Williams, M.C.; Salmon, S.G. [Texaco Inc., Beacon, NY (United States)

1995-12-31T23:59:59.000Z

134

Method and apparatus for monitoring motor operated valve motor output torque and power at valve seating  

DOE Patents [OSTI]

A method and apparatus are provided for monitoring a motor operated valve during the brief period when the valve seats and the torque switch trips to deenergize the valve motor. The method uses voltage measurements on the load side of a deenergizing switch that opens to deenergize the motor to determine, among other things, final motor rotational speed and the decelerating torque at motor deenergization. 14 figs.

Casada, D.A.

1996-01-16T23:59:59.000Z

135

Method and apparatus for monitoring motor operated valve motor output torque and power at valve seating  

DOE Patents [OSTI]

A method and apparatus are provided for monitoring a motor operated valve during the brief period when the valve seats and the torque switch trips to deenergize the valve motor. The method uses voltage measurements on the load side of a deenergizing switch that opens to deenergize the motor to determine, among other things, final motor rotational speed and the decelerating torque at motor deenergization.

Casada, Donald A. (Oak Ridge, TN)

1996-01-01T23:59:59.000Z

136

Estimating Use of Non-Motorized Infrastructure: Models of Bicycle and  

E-Print Network [OSTI]

Estimating Use of Non-Motorized Infrastructure: Models of Bicycle and Pedestrian Traffic · Transportation managers lack data about use of bicycle and pedestrian facilities. · Federal, state, & local of Day Bicycle: Loop Detector Bicycle: Manual Count Pedestrian: Manual Count #12;Scaling factors

Minnesota, University of

137

Best Practices in Non-Motorized Transport Planning, Implementation and  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectricEnergyCTBarre Biomass FacilityOregon: EnergyBiofuels LLC Jump

138

Molecular Motors - A Different Kind of Transport | Argonne National  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challenge fundProject8Mistakes to AvoidKinetics

139

Transportation and quality of life: a citizen perspective  

E-Print Network [OSTI]

and a keen focus on the user experience, personal communication devices have become virtual hubs for social of personal communication and information devices and technologies in that process. The free seminar of transportation systems and services. Yet in many other realms of personal consumption, says Professor Hani

Minnesota, University of

140

Personal Services Agreements Waivers  

E-Print Network [OSTI]

Personal Services Agreements Waivers: Appendix A2 Responsible Administrative Units: Human Resources be performed by CSM staff. 4. Student Recruit Data Collection Services: Services include collecting a nation the adequate staff to perform these services. #12;Personal Services Agreements Waivers: Appendix A2 Responsible

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Personal Services Agreements Waivers  

E-Print Network [OSTI]

Personal Services Agreements Waivers: Appendix A1 Responsible Administrative Units: Human Resources mapping, reviewing, surveying, and data collection for which CSM does not have staff qualified to perform these specialized services. #12;Personal Services Agreements Waivers: Appendix A1 Responsible Administrative Units

142

Web Personalization Magdalini Eirinaki  

E-Print Network [OSTI]

Web Mining for Web Personalization Magdalini Eirinaki Michalis Vazirgiannis Athens University of Economics and Business Department of Informatics #12;M.Eirinaki, M. Vazirgiannis Web Mining for Web Personalization 2PKDD 2005 Introduction Continuous growth in the size and the use of WWW Large and complicated web

Eirinaki, Magdalini

143

Transportation Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Transportation Services Transporting nuclear materials within the United States and throughout the world is a complicated and sometimes highly controversial effort requiring...

144

Local Transportation  

E-Print Network [OSTI]

Local Transportation. Transportation from the Airport to Hotel. There are two types of taxi companies that operate at the airport: special and regular taxis (

145

Chemistry in Motion: Tiny Synthetic Motors  

E-Print Network [OSTI]

In this Account, we describe how synthetic motors that operate by self-diffusiophoresis make use of a self-generated concentration gradient to drive motor motion. A description of propulsion by self-diffusiophoresis is presented for Janus particle motors comprising catalytic and noncatalytic faces. The properties of the dynamics of chemically powered motors are illustrated by presenting the results of particle-based simulations of sphere-dimer motors constructed from linked catalytic and noncatalytic spheres. The geometries of both Janus and sphere-dimer motors with asymmetric catalytic activity support the formation of concentration gradients around the motors. Because directed motion can occur only when the system is not in equilibrium, the nature of the environment and the role it plays in motor dynamics are described. Rotational Brownian motion also acts to limit directed motion, and it has especially strong effects for very small motors. We address the following question: how small can motors be and still exhibit effects due to propulsion, even if only to enhance diffusion? Synthetic motors have the potential to transform the manner in which chemical dynamical processes are carried out for a wide range of applications.

Peter H. Colberg; Shang Yik Reigh; Bryan Robertson; Raymond Kapral

2014-11-03T23:59:59.000Z

146

ORNL/TM-2009/222 Center for Transportation Analysis  

E-Print Network [OSTI]

. ESTIMATION OF GASOLINE CONSUMPTION BY PUBLIC SECTOR..............41 5.1 Federal Civilian Motor/Commercial Sectors..............................................29 4.3 Off-highway Gasoline Consumption by EquipmentORNL/TM-2009/222 Center for Transportation Analysis Energy and Transportation Science Division OFF

147

Chamber transport  

SciTech Connect (OSTI)

Heavy ion beam transport through the containment chamber plays a crucial role in all heavy ion fusion (HIF) scenarios. Here, several parameters are used to characterize the operating space for HIF beams; transport modes are assessed in relation to evolving target/accelerator requirements; results of recent relevant experiments and simulations of HIF transport are summarized; and relevant instabilities are reviewed. All transport options still exist, including (1) vacuum ballistic transport, (2) neutralized ballistic transport, and (3) channel-like transport. Presently, the European HIF program favors vacuum ballistic transport, while the US HIF program favors neutralized ballistic transport with channel-like transport as an alternate approach. Further transport research is needed to clearly guide selection of the most attractive, integrated HIF system.

OLSON,CRAIG L.

2000-05-17T23:59:59.000Z

148

Reduced vibration motor winding arrangement  

DOE Patents [OSTI]

An individual phase winding arrangement having a sixty electrical degree phase belt width for use with a three phase motor armature includes a delta connected phase winding portion and a wye connected phase winding portion. Both the delta and wye connected phase winding portions have a thirty electrical degree phase belt width. The delta and wye connected phase winding portions are each formed from a preselected number of individual coils each formed, in turn, from an unequal number of electrical conductor turns in the approximate ratio of {radical}3. The individual coils of the delta and wye connected phase winding portions may either be connected in series or parallel. This arrangement provides an armature winding for a three phase motor which retains the benefits of the widely known and utilized thirty degree phase belt concept, including improved mmf waveform and fundamental distribution factor, with consequent reduced vibrations and improved efficiency. 4 figs.

Slavik, C.J.; Rhudy, R.G.; Bushman, R.E.

1997-11-11T23:59:59.000Z

149

System and method for motor speed estimation of an electric motor  

DOE Patents [OSTI]

A system and method for a motor management system includes a computer readable storage medium and a processing unit. The processing unit configured to determine a voltage value of a voltage input to an alternating current (AC) motor, determine a frequency value of at least one of a voltage input and a current input to the AC motor, determine a load value from the AC motor, and access a set of motor nameplate data, where the set of motor nameplate data includes a rated power, a rated speed, a rated frequency, and a rated voltage of the AC motor. The processing unit is also configured to estimate a motor speed based on the voltage value, the frequency value, the load value, and the set of nameplate data and also store the motor speed on the computer readable storage medium.

Lu, Bin (Kenosha, WI); Yan, Ting (Brookfield, WI); Luebke, Charles John (Sussex, WI); Sharma, Santosh Kumar (Viman Nagar, IN)

2012-06-19T23:59:59.000Z

150

ELECTROCHEMICAL POWER FOR TRANSPORTATION  

E-Print Network [OSTI]

that is powered by an electric motor which is driven byPower module Reactor Electric motor Toyota EVlH electricdesign package including an electric motor and associated

Cairns, Elton J.

2012-01-01T23:59:59.000Z

151

Method for assessing in-service motor efficiency and in-service motor/load efficiency  

DOE Patents [OSTI]

A method and apparatus for assessing the efficiency of an in-service motor. The operating characteristics of the in-service motor are remotely measured. The operating characteristics are then applied to an equivalent circuit for electrical motors. Finally the equivalent circuit is evaluated to determine the performance characteristics of said in-service motor. Based upon the evaluation an individual is able to determine the rotor speed, power output, efficiency, and toque of the in-service motor. Additionally, an individual is able to confirm the calculations by comparing measured values with values obtained as a result of the motor equivalent circuit evaluation.

Kueck, John D. (Oak Ridge, TN); Otaduy, Pedro J. (Oak Ridge, TN)

1997-01-01T23:59:59.000Z

152

Personalized building comfort control  

E-Print Network [OSTI]

Creating an appropriate indoor climate is essential to worker productivity and personal happiness. It is also an area of large expenditure for building owners. And, with rising fuel costs, finding ways of reducing energy ...

Feldmeier, Mark Christopher, 1974-

2009-01-01T23:59:59.000Z

153

Headquarters Personal Property Management  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish procedures for managing Government personal property owned or leased by the Department of Energy and in the custody of DOE Headquarters employees, including those in the National Nuclear Security Administration. Cancels DOE HQ O 580.1A

2004-10-25T23:59:59.000Z

154

Dynein Motor Domain Shows Ring-Shaped Motor, Buttress  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed NewcatalystNeutron scattering characterizes dynamics in polymerDynein Motor Domain

155

Dynein Motor Domain Shows Ring-Shaped Motor, Buttress  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed NewcatalystNeutron scattering characterizes dynamics in polymerDynein Motor

156

Dynein Motor Domain Shows Ring-Shaped Motor, Buttress  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed NewcatalystNeutron scattering characterizes dynamics in polymerDynein MotorDynein

157

Dynein Motor Domain Shows Ring-Shaped Motor, Buttress  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct:Directives Templates8.Siftingnanocrystals forDynein Motor

158

Environmental control of microtubule-based bidirectional cargo-transport  

E-Print Network [OSTI]

Inside cells, various cargos are transported by teams of molecular motors. Intriguingly, the motors involved generally have opposite pulling directions, and the resulting cargo dynamics is a biased stochastic motion. It is an open question how the cell can control this bias. Here we develop a model which takes explicitly into account the elastic coupling of the cargo with each motor. We show that bias can be simply controlled or even reversed in a counterintuitive manner via a change in the external force exerted on the cargo or a variation of the ATP binding rate to motors. Furthermore, the superdiffusive behavior found at short time scales indicates the emergence of motor cooperation induced by cargo-mediated coupling.

Sarah Klein; Cťcile Appert-Rolland; Ludger Santen

2014-07-07T23:59:59.000Z

159

Motorization, Vehicle Purchase and Use Behavior in China: A Shanghai Survey????????????????????????????  

E-Print Network [OSTI]

49: Motorized Two-wheeler / Motorcycle Use vs. Motorized98 Table 50: Motorized Two-wheeler / Motorcycle Use vs.Motorcycle Ownership 98 Table 51: Motorized Two-

Ni, Jason

2008-01-01T23:59:59.000Z

160

Rotary steerable motor system for underground drilling  

DOE Patents [OSTI]

A preferred embodiment of a system for rotating and guiding a drill bit in an underground bore includes a drilling motor and a drive shaft coupled to drilling motor so that drill bit can be rotated by the drilling motor. The system further includes a guidance module having an actuating arm movable between an extended position wherein the actuating arm can contact a surface of the bore and thereby exert a force on the housing of the guidance module, and a retracted position.

Turner, William E. (Durham, CT); Perry, Carl A. (Middletown, CT); Wassell, Mark E. (Kingwood, TX); Barbely, Jason R. (Middletown, CT); Burgess, Daniel E. (Middletown, CT); Cobern, Martin E. (Cheshire, CT)

2010-07-27T23:59:59.000Z

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Rotary steerable motor system for underground drilling  

DOE Patents [OSTI]

A preferred embodiment of a system for rotating and guiding a drill bit in an underground bore includes a drilling motor and a drive shaft coupled to drilling motor so that drill bit can be rotated by the drilling motor. The system further includes a guidance module having an actuating arm movable between an extended position wherein the actuating arm can contact a surface of the bore and thereby exert a force on the housing of the guidance module, and a retracted position.

Turner, William E. (Durham, CT); Perry, Carl A. (Middletown, CT); Wassell, Mark E. (Kingwood, TX); Barbely, Jason R. (Middletown, CT); Burgess, Daniel E. (Middletown, CT); Cobern, Martin E. (Cheshire, CT)

2008-06-24T23:59:59.000Z

162

Energy-Efficient Electric Motor Selection Handbook  

SciTech Connect (OSTI)

Substantial reductions in energy and operational costs can be achieved through the use of energy-efficient electric motors. A handbook was compiled to help industry identify opportunities for cost-effective application of these motors. It covers the economic and operational factors to be considered when motor purchase decisions are being made. Its audience includes plant managers, plant engineers, and others interested in energy management or preventative maintenance programs.

McCoy, Gilbert A.; Litman, Todd; Douglass, John G.

1990-10-01T23:59:59.000Z

163

System and method for determining stator winding resistance in an AC motor using motor drives  

SciTech Connect (OSTI)

A system and method for determining the stator winding resistance of AC motors is provided. The system includes an AC motor drive having an input connectable to an AC source and an output connectable to an input terminal of an AC motor, a pulse width modulation (PWM) converter having switches therein to control current flow and terminal voltages in the AC motor, and a control system connected to the PWM converter. The control system generates a command signal to cause the PWM converter to control an output of the AC motor drive corresponding to an input to the AC motor, selectively generates a modified command signal to cause the PWM converter to inject a DC signal into the output of the AC motor drive, and determines a stator winding resistance of the AC motor based on the DC signal of at least one of the voltage and current.

Lu, Bin; Habetler, Thomas G; Zhang, Pinjia

2013-02-26T23:59:59.000Z

164

The Evolution of Sustainable Personal Vehicles  

E-Print Network [OSTI]

e.g. battery) EM- electric motor/machine ERI- externallyElectric Motorsbased on hub-mounted electric motors, and he incorporated

Jungers, Bryan D

2009-01-01T23:59:59.000Z

165

Electrical system for a motor vehicle  

DOE Patents [OSTI]

In one embodiment of the present invention, an electrical system for a motor vehicle comprises a capacitor, an engine cranking motor coupled to receive motive power from the capacitor, a storage battery and an electrical generator having an electrical power output, the output coupled to provide electrical energy to the capacitor and to the storage battery. The electrical system also includes a resistor which limits current flow from the battery to the engine cranking motor. The electrical system further includes a diode which allows current flow through the diode from the generator to the battery but which blocks current flow through the diode from the battery to the cranking motor. 2 figs.

Tamor, M.A.

1999-07-20T23:59:59.000Z

166

Electrical system for a motor vehicle  

DOE Patents [OSTI]

In one embodiment of the present invention, an electrical system for a motor vehicle comprises a capacitor, an engine cranking motor coupled to receive motive power from the capacitor, a storage battery and an electrical generator having an electrical power output, the output coupled to provide electrical energy to the capacitor and to the storage battery. The electrical system also includes a resistor which limits current flow from the battery to the engine cranking motor. The electrical system further includes a diode which allows current flow through the diode from the generator to the battery but which blocks current flow through the diode from the battery to the cranking motor.

Tamor, Michael Alan (Toledo, OH)

1999-01-01T23:59:59.000Z

167

-UNIT NAME C-728 Motor Cleaning Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

UNIT NUMBER 33 -UNIT NAME C-728 Motor Cleaning Facility -REGULATORY STATUS--3:.:::.0:..04(--u) -LOCATION North of C-720 (Map...

168

Fluid Gravity Engineering Rocket motor flow analysis  

E-Print Network [OSTI]

Fluid Gravity Engineering Capability · Rocket motor flow analysis -Internal (performance) -External young scientists/engineers Fluid Gravity Engineering Ltd #12;

Anand, Mahesh

169

The flashing ratchet and unidirectional transport of matter  

E-Print Network [OSTI]

We study the flashing ratchet model of a Brownian motor, which consists in cyclical switching between the Fokker-Planck equation with an asymmetric ratchet-like potential and the pure diffusion equation. We show that the motor really performs unidirectional transport of mass, for proper parameters of the model, by analyzing the attractor of the problem and the stationary vector of a related Markov chain.

Dmitry Vorotnikov

2010-09-17T23:59:59.000Z

170

How to Build a Motor  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickr FlickrGuidedCH2MLLC HistoryVeterans |VirtualLoveApply for YourMotor

171

Aurica Motors | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 EastMaine: Energy Resources JumpAspenAudubon, Pennsylvania:AugustaAurica Motors Jump

172

Brandl Motor | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: EnergyBoston Area Solar EnergyBradbury, California: ItBrammo MotorsportsMotor

173

Electric Motors and Critical Materials  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.Program - LibbyofThisStatement Tuesday,DepartmentTheand ContactELECTRIC MOTORS

174

AGNI Motors | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 SouthWater Rights,Information OfOpen EnergyEnergyAGE UFMGAGNI Motors

175

Sandia National Laboratories: General Motors  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -theErik Spoerke SSLS Exhibit at Explora MuseumFloatingFrontGTO SandiaMotors Sandia

176

3.1. MOTOR SYSTEM 35 3.1 Motor System  

E-Print Network [OSTI]

3.1. MOTOR SYSTEM 35 3.1 Motor System The motor system comprises the dynamic model of the fish fish's brain. Since our goal is to animate an animal realistically and at reasonable computational cost controllers by gleaning information from the fish biomechanics literature (Blake, 1983; Alexander, 1992

Toronto, University of

177

Abstract--There are two types of drivers in production machine systems: constant velocity (CV) motor and servo-motor.  

E-Print Network [OSTI]

the dynamic model of the five-bar hybrid mechanism including its electric motors. Section 3 presents) motor and servo-motor. If a system contains two drivers or more, among which some are of the CV motor while the other are the servo-motor, the system has the so-called hybrid driver architecture

Zhang, WJ "Chris"

178

Development of Ulta-Efficient Electric Motors  

SciTech Connect (OSTI)

Electric motors utilize a large amount of electrical energy in utility and industrial applications. Electric motors constructed with high temperature superconducting (HTS) materials have the potential to dramatically reduce electric motor size and losses. HTS motors are best suited for large motor applications at ratings above 1000 horsepower (hp), where the energy savings from the efficiency improvement can overcome the additional power required to keep the superconductors on the rotor cooled. Large HTS based motors are expected to be half the volume and have half the losses of conventional induction motors of the same rating. For a 5000 hp industrial motor, this energy savings can result in $50,000 in operating cost savings over the course of a single year of operation. Since large horsepower motors utilize (or convert) about 30% of the electrical power generated in the United States and about 70% of large motors are candidates for replacement by HTS motors, the annual energy savings potential through the utilization of HTS motors can be up to $1 Billion in the United States alone. Research in the application of HTS materials to electric motors has lead to a number of HTS motor prototypes yet no industrial HTS motor product has yet been introduced. These motor demonstrations have been synchronous motors with HTS field windings, on the rotor. Figure 1-1 shows a solid model rendering of this type of motor. The rotor winding is made with HTS coils that are held at cryogenic temperature by introducing cooling fluid from the cryocooler to the rotor through a transfer coupling. The stator winding is made of copper wire. The HTS winding is thermally isolated from the warm armature and motor shafts by a vacuum insulation space and through the use of composite torque tubes. The stator in Figure 1-1 is an air core stator in that the stator teeth and a small part of the yoke is made up of nonmagnetic material so the magnetic fields distribute themselves as if in air. Between the HTS field winding and the physical air gap is a series of concentric cylinders that act as vacuum insulation space walls as well as conducting paths for induced currents to flow in order to shield the HTS winding and the rotor cold space from time dependent fields. These time dependent fields may be caused by rotor hunting, during a change in motor load, or by non-fundamental component voltages and currents applied by the inverter. These motors are variable speed controlled by the inverter. Common large motor utility and industrial applications are pump and fan drives that are best suited by a variable speed motor. Inverter control of the HTS motor eliminates the need to design the rotor for line starting, which would dump a large amount of heat into the rotor that would then heavily tax the cryogenic cooling system. The field winding is fed by a brushless exciter that provides DC current to the HTS rotor winding. The stator winding is air or water cooled. Technical and commercial hurdles to industrial HTS motor product introduction and customer acceptance include (1) the high cost of HTS wire and the cryogenic cooling system components, (2) customer concerns about reliability of HTS motors, and (3) the ability to attain the loss reduction potential of large HTS motors. Reliance Electric has demonstrated a number of HTS based electric motors up to a 1000 hp, variable speed synchronous motor with an HTS field winding in the year 2000. In 2001 this motor was tested to 1600 hp with a sinusoidal (constant frequency) supply. Figure 1-2 shows the HTS motor on the dynamometer test stand in the Reliance Electric test lab. The extensive test program of the 1000 hp motor successfully demonstrated the technical feasibility of large HTS motors and the basic technologies involved, however the test results did indicate the need for design refinements. In addition, test results served to identify other more fundamental critical technology issues, and revealed the need to continue research efforts in order to improve future HTS motor first cost, reliability, and performa

Shoykhet, B. (Baldor Comp.); Schiferl, R. (Baldor Comp.); Duckworth, R.; Rey, C.M.; Schwenterly, S.W.; Gouge, M.J.

2008-05-01T23:59:59.000Z

179

Permanent magnet assisted synchronous reluctance motor, design and performance improvement  

E-Print Network [OSTI]

Recently, permanent magnet assisted (PMa)-synchronous reluctance motors (SynRM) have been considered as a possible alternative motor drive for high performance applications. In order to have an efficient motor drive, performing of three steps...

Niazi, Peyman

2006-04-12T23:59:59.000Z

180

Rare-Earth-Free Traction Motor: Rare Earth-Free Traction Motor for Electric Vehicle Applications  

SciTech Connect (OSTI)

REACT Project: Baldor will develop a new type of traction motor with the potential to efficiently power future generations of EVs. Unlike todayís large, bulky EV motors which use expensive, imported rare-earth-based magnets, Baldorís motor could be light, compact, contain no rare earth materials, and have the potential to deliver more torque at a substantially lower cost. Key innovations in this project include the use of a unique motor design, incorporation of an improved cooling system, and the development of advanced materials manufacturing techniques. These innovations could significantly reduce the cost of an electric motor.

None

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Torquespeed relationship of the bacterial flagellar motor  

E-Print Network [OSTI]

. speed curve is derived from the usual external load torque vs. speed curve as follows. The motor≠speed curve. The same physics also can explain certain puzzling properties of other motors. energy conversion external loads and gives an indication of the energy conversion efficiency. Moreover, the torque

Oster, George

182

Commercial Motor Vehicle Brake Assessment Tools  

E-Print Network [OSTI]

Commercial Motor Vehicle Brake Assessment Tools Commercial Motor Vehicle Roadside Technology to deceleration in g's ­ Passing score: BE43.5 · Enforcement tool for only 3 years. · Based solely on brake Brake Research · CMVRTC research built on these enforcement tools ­ Correlation Study ­ Level-1 / PBBT

183

Total Economics of Energy Efficient Motors  

E-Print Network [OSTI]

Due to the large increases in cost of electrical energy in recent years, the energy savings attainable with the use of energy-efficient motors is very attractive to all motor users. But energy and electric demand charge savings tell only part...

Nester, A. T.

1984-01-01T23:59:59.000Z

184

Nanoconfined catalytic ŇngstrŲm-size motors  

E-Print Network [OSTI]

Chemically-powered synthetic micron and nano-scale motors that propel themselves in solution are being intensively studied because of the wide range of potential applications that exploit their directed motion. Recent experiments have shown that, even on the molecular scale, small-molecule catalysts and single enzyme molecules exhibit properties that have been attributed to self-propulsion. Simulations of very small {\\AA}ngstr\\"om-size synthetic motors in bulk solution have shown similar effects. Applications of such small motors in the cell or in microfluidic devices require knowledge of how these motors interact with boundaries. Molecular dynamics is used to investigate the properties of {\\AA}ngstr\\"om-size synthetic chemically-powered motors confined between walls separated by distances of tens of nanometers. Evidence for strong structural ordering of the motors between the walls, which reflects the finite size of solvent molecules and depends on solvent exclusion forces, is provided. Dynamical properties, such as average motor velocity, orientational relaxation and mean square displacement, are anisotropic and depend on the distance from the walls. This research presents information needed for potential applications that use these motors in the complex confined geometries encountered in biology and the laboratory.

Peter H. Colberg; Raymond Kapral

2015-01-13T23:59:59.000Z

185

Oscillation control system for electric motor drive  

DOE Patents [OSTI]

A feedback system for controlling mechanical oscillations in the torsionally complaint drive train of an electric or other vehicle. Motor speed is converted in a processor to estimate state signals in which a plant model which are used to electronically modify thetorque commands applied to the motor.

Slicker, James M. (Union Lake, MI); Sereshteh, Ahmad (Union Lake, MI)

1988-01-01T23:59:59.000Z

186

Oscillation control system for electric motor drive  

DOE Patents [OSTI]

A feedback system for controlling mechanical oscillations in the torsionally complaint drive train of an electric or other vehicle. Motor speed is converted in a processor to estimate state signals in which a plant model which are used to electronically modify the torque commands applied to the motor. 5 figs.

Slicker, J.M.; Sereshteh, A.

1988-08-30T23:59:59.000Z

187

Performance improvement of permanent magnet ac motors  

E-Print Network [OSTI]

.????????????????....????.. 19 B. Background............??..?????.??.?????...?.?.... 20 C. Comparing BLDC Motor and PMSM???????????... 24 D. Harmonic Spectrum of MMF in Machines with Non-sinusoidal Winding Distribution??????????????????.. 26 ix TABLE............................................................................ 58 H. Conclusion??????????????????????. 68 III FAULT TOLERANT OPERATION OF PERMANENT MAGNET MOTOR DRIVES?????????????????????? 69 A. Introduction.????????????????....???.?. 69 B. Fault Tolerant Operation of Five-Phase PMSM...

Parsa, Leila

2005-08-29T23:59:59.000Z

188

A permit is required for ALL motorized vehicles parking on the Vanderbilt University Campus. Motorcycles, motorized bicycles, motor scooters and mopeds are  

E-Print Network [OSTI]

. Motorcycles, motorized bicycles, motor scooters and mopeds are required to display "U" permits. The cost. Motorcycle, motorized bicycle, motor scooter and moped parking areas can be found on the parking map (http://www.vanderbilt.edu/parking and click on "Maps") as designated by the motorcycle symbols. Parking is authorized only in spaces marked

Simaan, Nabil

189

High-speed electrical motor evaluation  

SciTech Connect (OSTI)

Under this task, MTI conducted a general review of state-of-the-art high-speed motors. The purpose of this review was to assess the operating parameters, limitations and performance of existing motor designs, and to establish commercial sources for a motor compatible with the requirements of the Brayton-cycle system. After the motor requirements were established, a list of motor types, manufacturers and designs capable of achieving the requisite performance was compiled. This list was based on an in-house evaluation of designs. Following the establishment of these options, a technical evaluation of the designs selected was conducted. In parallel with their evaluations, MTI focused on the establishment of commercial sources.

Not Available

1989-02-03T23:59:59.000Z

190

Introducing Fraunhofer Personal reflection  

E-Print Network [OSTI]

­ they are not part of the University. The Centres form an integral part of that country's innovation system while for Sustainable Energy Systems. The Fraunhofer model is certainly applicable to the UK (the Fraunhofer modelIntroducing Fraunhofer Personal reflection I have taken a keen interest in Fraunhofer Geselleschaft

Mottram, Nigel

191

Curriculum Vitae PERSONAL INFORMATION  

E-Print Network [OSTI]

Curriculum Vitae 1 PERSONAL INFORMATION Name: Tomomi Shimogori Title: Ph.D. Affiliation : RIKEN BSI, 824-9. #12;Curriculum Vitae 2 2. Igarashi K, Koga K, He Y, Shimogori T, Ekimoto H, Kashiwagi K. 274, 1942-8. #12;Curriculum Vitae 3 10. Iwata S, Sato Y, Asada M, Takagi M, Tsujimoto A, Inaba T

Kazama, Hokto

192

CURRICULUM VITAE PERSONAL INFORMATION  

E-Print Network [OSTI]

CURRICULUM VITAE PERSONAL INFORMATION Name RYABOV, Boris Address Ropazu 5 - 13, Riga, LV-1039 telescope RATAN-600. Page 1 ­ Curriculum vitae of RYABOV, Boris #12;· Dates 1984 ­ 1987, 1977 ­ 1979, 1974 good · Writing skills basic · Verbal skills excellent Page 2 ­ Curriculum vitae of RYABOV, Boris #12

Ryabov, Boris I.

193

Curriculum Vitae Personal information  

E-Print Network [OSTI]

Europass Curriculum Vitae Personal information First name(s) / Surname(s) Fedor / Marchenko Address 1/3 - Curriculum vitae of Marchenko Fedor #12;Education and training Dates Title of qualification Page 2/3 - Curriculum vitae of Marchenko Fedor #12;Other skills and competences Driving licence present

194

axial motor circuits: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Fundamentals of electromechanical energy conversion. Motors and generators, transformers, single and three- phase power circuits, three-phase induction motor including...

195

Improving Motor and Drive System Performance: A Sourcebook for Industry  

SciTech Connect (OSTI)

This is one in a series of sourcebooks to assist industrial personnel in understanding and optimizing motors and motor-driven systems

Not Available

2008-09-01T23:59:59.000Z

196

Motor monitoring method and apparatus using high frequency current components  

DOE Patents [OSTI]

A motor current analysis method and apparatus for monitoring electrical-motor-driven devices. The method and apparatus utilize high frequency portions of the motor current spectra to evaluate the condition of the electric motor and the device driven by the electric motor. The motor current signal produced as a result of an electric motor is monitored and the low frequency components of the signal are removed by a high-pass filter. The signal is then analyzed to determine the condition of the electrical motor and the driven device.

Casada, Donald A. (Knoxville, TN)

1996-01-01T23:59:59.000Z

197

Motor monitoring method and apparatus using high frequency current components  

DOE Patents [OSTI]

A motor current analysis method and apparatus for monitoring electrical-motor-driven devices are disclosed. The method and apparatus utilize high frequency portions of the motor current spectra to evaluate the condition of the electric motor and the device driven by the electric motor. The motor current signal produced as a result of an electric motor is monitored and the low frequency components of the signal are removed by a high-pass filter. The signal is then analyzed to determine the condition of the electrical motor and the driven device. 16 figs.

Casada, D.A.

1996-05-21T23:59:59.000Z

198

EV Everywhere Workshop: Electric Motors and Critical Materials...  

Broader source: Energy.gov (indexed) [DOE]

Electric Motors and Critical Materials Breakout Group Report EV Everywhere Workshop: Electric Motors and Critical Materials Breakout Group Report Presentation given at the EV...

199

DOE Issues Notice of Proposed Rulemaking for Electric Motors...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Notice of Proposed Rulemaking for Electric Motors Energy Conservation Standards DOE Issues Notice of Proposed Rulemaking for Electric Motors Energy Conservation Standards November...

200

United States Industrial Motor-Driven Systems Market Assessment...  

Broader source: Energy.gov (indexed) [DOE]

Motor-Driven Systems Market Assessment: Charting a Roadmap to Energy Savings for Industry United States Industrial Motor-Driven Systems Market Assessment: Charting a Roadmap to...

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Improving Motor and Drive System Performance - A Sourcebook for...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

motors and drives, as well as resources for additional information, tools, software, videos, and training opportunities. Improving Motor and Drive System Performance - A...

202

New rocket propellant and motor design offer high-performance...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

New rocket propellant and motor design offer high-performance and safety New rocket propellant and motor design offer high-performance and safety Scientists recently flight tested...

203

Premium Efficiency Motor Selection and Application Guide - A...  

Broader source: Energy.gov (indexed) [DOE]

handbook informs new motor purchase decisions by identifying energy and cost savings that can come from replacing motors with premium efficiency units. The handbook provides an...

204

Carbonyl Emissions from Gasoline and Diesel Motor Vehicles  

E-Print Network [OSTI]

fraction of light-duty gasoline vehicle particulate matterQuinone emissions from gasoline and diesel motor vehicles.32 organic compounds from gasoline- powered motor vehicles.

Jakober, Chris A.

2008-01-01T23:59:59.000Z

205

Fuel cell system for transportation applications  

DOE Patents [OSTI]

A propulsion system for a vehicle having pairs of front and rear wheels and a fuel tank. An electrically driven motor having an output shaft operatively connected to at least one of said pair of wheels is connected to a fuel cell having a positive electrode and a negative electrode separated by an electrolyte for producing dc power to operate the motor. A partial oxidation reformer is connected both to the fuel tank and to the fuel cell receives hydrogen-containing fuel from the fuel tank and water and air and for partially oxidizing and reforming the fuel with water and air in the presence of an oxidizing catalyst and a reforming catalyst to produce a hydrogen-containing gas. The hydrogen-containing gas is sent from the partial oxidation reformer to the fuel cell negative electrode while air is transported to the fuel cell positive electrode to produce dc power for operating the electric motor.

Kumar, Romesh (Naperville, IL); Ahmed, Shabbir (Evanston, IL); Krumpelt, Michael (Naperville, IL); Myles, Kevin M. (Downers Grove, IL)

1993-01-01T23:59:59.000Z

206

Fuel cell system for transportation applications  

DOE Patents [OSTI]

A propulsion system is described for a vehicle having pairs of front and rear wheels and a fuel tank. An electrically driven motor having an output shaft operatively connected to at least one of said pair of wheels is connected to a fuel cell having a positive electrode and a negative electrode separated by an electrolyte for producing dc power to operate the motor. A partial oxidation reformer is connected both to the fuel tank and to the fuel cell and receives hydrogen-containing fuel from the fuel tank and uses water and air for partially oxidizing and reforming the fuel in the presence of an oxidizing catalyst and a reforming catalyst to produce a hydrogen-containing gas. The hydrogen-containing gas is sent from the partial oxidation reformer to the fuel cell negative electrode while air is transported to the fuel cell positive electrode to produce dc power for operating the electric motor. 3 figures.

Kumar, R.; Ahmed, S.; Krumpelt, M.; Myles, K.M.

1993-09-28T23:59:59.000Z

207

Author's personal copy Photoelectrochemical hydrogen production from water/  

E-Print Network [OSTI]

coal and gasoline [3]. Moreover, hydrogen can be used in fuel cells to generate electricity, or directly as a transportation fuel [4]. Hydrogen can be generated from hydrocarbons and water resourcesAuthor's personal copy Photoelectrochemical hydrogen production from water/ methanol decomposition

Wood, Thomas K.

208

Projection of Chinese motor vehicle growth, oil demand, and CO{sub 2}emissions through 2050.  

SciTech Connect (OSTI)

As the vehicle population in China increases, oil consumption and carbon dioxide (CO{sub 2}) emissions associated with on-road transportation are rising dramatically. During this study, we developed a methodology to project trends in the growth of the vehicle population, oil demand, and CO{sub 2} emissions associated with on-road transportation in China. By using this methodology, we projected--separately--the number of highway vehicles, motorcycles, and rural vehicles in China through 2050. We used three scenarios of highway vehicle growth (high-, mid-, and low-growth) to reflect patterns of motor vehicle growth that have occurred in different parts of the world (i.e., Europe and Asia). All are essentially business-as-usual scenarios in that almost none of the countries we examined has made concerted efforts to manage vehicle growth or to offer serious alternative transportation means to satisfy people's mobility needs. With this caveat, our projections showed that by 2030, China could have more highway vehicles than the United States has today, and by 2035, it could have the largest number of highway vehicles in the world. By 2050, China could have 486-662 million highway vehicles, 44 million motorcycles, and 28 million rural vehicles. These numbers, which assume essentially unmanaged vehicle growth, would result in potentially disastrous effects on the urban infrastructure, resources, and other social and ecological aspects of life in China. We designed three fuel economy scenarios, from conservative to aggressive, on the basis of current policy efforts and expectations of near-future policies in China and in developed countries. It should be noted that these current and near-future policies have not taken into consideration the significant potential for further fuel economy improvements offered by advanced technologies such as electric drive technologies (e.g., hybrid electric vehicles and fuel-cell vehicles). By using vehicle growth projections and potential vehicle fuel economy, we projected that China's on-road vehicles could consume approximately 614-1016 million metric tons of oil per year (12.4-20.6 million barrels per day) and could emit 1.9-3.2 billion metric tons of CO{sub 2} per year in 2050, which will put tremendous pressure on the balance of the Chinese and world oil supply and demand and could have significant implications on climate change. Our analysis shows that, while improvements in vehicle fuel economy are crucial for reducing transportation energy use, containing the growth of the vehicle population could have an even more profound effect on oil use and CO{sub 2} emissions. This benefit is in addition to other societal and environmental benefits--such as reduced congestion, land use, and urban air pollution--that will result from containing vehicle population growth. Developing public transportation systems for personal travel and rail and other modes for freight transportation will be important for containing the growth of motor vehicles in China. Although the population of passenger cars will far exceed that of all truck types in China in the future, our analysis shows that oil use by and CO{sub 2} emissions from the Chinese truck fleet will be far larger than those related to Chinese passenger cars because trucks are very use intensive (more vehicle miles traveled per year) and energy intensive (lower fuel economy). Unfortunately, the potential for improving fuel economy and reducing air pollutant emissions for trucks has not been fully explored; such efforts are needed. Considering the rapid depletion of the world's oil reserve, the heightened global interest in addressing greenhouse gas emissions, and the geopolitical complications of global oil supply and demand, the study results suggest that unmanaged vehicle growth and limited improvements in vehicle fuel efficiency will lead to an unsustainable and unstable transportation system in China. In other words, while our projections do not definitively indicate what will happen in the Chinese transportation sector by 2050, they do demonstrate

Wang, M.; Huo, H.; Johnson, L.; He, D.

2006-12-20T23:59:59.000Z

209

Projection of Chinese motor vehicle growth, oil demand, and Co{sub 2} emissions through 2050.  

SciTech Connect (OSTI)

As the vehicle population in China increases, oil consumption and carbon dioxide (CO{sub 2}) emissions associated with on-road transportation are rising dramatically. During this study, we developed a methodology to project trends in the growth of the vehicle population, oil demand, and CO{sub 2} emissions associated with on-road transportation in China. By using this methodology, we projected separately the number of highway vehicles, motorcycles, and rural vehicles in China through 2050. We used three scenarios of highway vehicle growth (high-, mid-, and low-growth) to reflect patterns of motor vehicle growth that have occurred in different parts of the world (i.e., Europe and Asia). All are essentially business-as-usual scenarios in that almost none of the countries we examined has made concerted efforts to manage vehicle growth or to offer serious alternative transportation means to satisfy people's mobility needs. With this caveat, our projections showed that by 2030, China could have more highway vehicles than the United States has today, and by 2035, it could have the largest number of highway vehicles in the world. By 2050, China could have 486-662 million highway vehicles, 44 million motorcycles, and 28 million rural vehicles. These numbers, which assume essentially unmanaged vehicle growth, would result in potentially disastrous effects on the urban infrastructure, resources, and other social and ecological aspects of life in China. We designed three fuel economy scenarios, from conservative to aggressive, on the basis of current policy efforts and expectations of near-future policies in China and in developed countries. It should be noted that these current and near-future policies have not taken into consideration the significant potential for further fuel economy improvements offered by advanced technologies such as electric drive technologies (e.g., hybrid electric vehicles and fuel-cell vehicles). By using vehicle growth projections and potential vehicle fuel economy, we projected that China's on-road vehicles could consume approximately 614-1016 million metric tons of oil per year (12.4-20.6 million barrels per day) and could emit 1.9-3.2 billion metric tons of CO{sub 2} per year in 2050, which will put tremendous pressure on the balance of the Chinese and world oil supply and demand and could have significant implications on climate change. Our analysis shows that, while improvements in vehicle fuel economy are crucial for reducing transportation energy use, containing the growth of the vehicle population could have an even more profound effect on oil use and CO{sub 2} emissions. This benefit is in addition to other societal and environmental benefits--such as reduced congestion, land use, and urban air pollution--that will result from containing vehicle population growth. Developing public transportation systems for personal travel and rail and other modes for freight transportation will be important for containing the growth of motor vehicles in China. Although the population of passenger cars will far exceed that of all truck types in China in the future, our analysis shows that oil use by and CO{sub 2} emissions from the Chinese truck fleet will be far larger than those related to Chinese passenger cars because trucks are very use intensive (more vehicle miles traveled per year) and energy intensive (lower fuel economy). Unfortunately, the potential for improving fuel economy and reducing air pollutant emissions for trucks has not been fully explored; such efforts are needed. Considering the rapid depletion of the world's oil reserve, the heightened global interest in addressing greenhouse gas emissions, and the geopolitical complications of global oil supply and demand, the study results suggest that unmanaged vehicle growth and limited improvements in vehicle fuel efficiency will lead to an unsustainable and unstable transportation system in China. In other words, while our projections do not definitively indicate what will happen in the Chinese transportation sector by 2050, they do demonstrate th

Huo, H.; Wang, M.; Johnson, L.; He, D.; Energy Systems; Energy Foundation

2007-01-01T23:59:59.000Z

210

Evacuation/Transportation Checklist for Child Care Facilities Keeping Kids Safe: Emergency Planning for Child-Care Facilities  

E-Print Network [OSTI]

Evacuation/Transportation Checklist for Child Care Facilities Keeping Kids Safe: Emergency Planning for Child-Care Facilities Evacuation/Transportation Checklist for Child-Care Facilities Name of child-care facility Address Name of person/persons responsible for transportation of children Phone number

211

Tug-of-war of molecular motors: the effects of uneven load sharing  

E-Print Network [OSTI]

We analyze theoretically the problem of cargo transport along microtubules by motors of two species with opposite polarities. We consider two different one-dimensional models previously developed in the literature. On the one hand, a quite widespread model which assumes equal force sharing, here referred to as mean field model (MFM). On the other hand, a stochastic model (SM) which considers individual motor-cargo links. We find that in generic situations the MFM predicts larger cargo mean velocity, smaller mean run time and less frequent reversions than the SM. These phenomena are found to be consequences of the load sharing assumptions and can be interpreted in terms the probabilities of the different motility states. We also explore the influence of the viscosity in both models and the role of the stiffness of the motor-cargo links within the SM. Our results show that the mean cargo velocity is independent of the stiffness while the mean run time decreases with such a parameter. We explore the case of symmetric forward and backward motors considering kinesin- 1 parameters, and the problem of transport by kinesin-1 and cytoplasmic dyneins considering two different sets of parameters previously proposed for dyneins.

Sebastian Bouzat; Fernando Falo

2011-11-29T23:59:59.000Z

212

Transportation Security  

Broader source: Energy.gov (indexed) [DOE]

Preliminary Draft - For Review Only 1 Transportation Security Draft Annotated Bibliography Review July 2007 Preliminary Draft - For Review Only 2 Work Plan Task * TEC STG Work...

213

Computational Transportation  

E-Print Network [OSTI]

), in-vehicle computers, and computers in the transportation infrastructure are integrated ride- sharing, real-time multi-modal routing and navigation, to autonomous/assisted driving

Illinois at Chicago, University of

214

Optimization of induction motor efficiency. Volume 3. Experimental comparison of three-phase standard motors with Wanlass motors. Final report  

SciTech Connect (OSTI)

Researchers conducted comprehensive laboratory tests to evaluate the effectiveness of the Wanlass connection in improving motor efficiency. On the basis of these tests, they found no reason to conclude that such a connection is more efficient than the standard connection.

Fuchs, E.F.

1985-12-01T23:59:59.000Z

215

Synchronous motor with soft start element formed between the motor rotor and motor output shaft to successfully synchronize loads that have high inertia and/or high torque  

DOE Patents [OSTI]

A line-start synchronous motor has a housing, a rotor shaft, and an output shaft. A soft-start coupling portion is operatively coupled to the output shaft and the rotor shaft. The soft-start coupling portion is configurable to enable the synchronous motor to obtain synchronous operation and to drive, at least near synchronous speed during normal steady state operation of the motor, a load having characteristics sufficient to prevent obtaining normal synchronous operation of the motor when the motor is operatively connected to the load in the absence of the soft-start coupling. The synchronous motor is sufficiently rated to obtain synchronous operation and to drive, at least near synchronous speed during normal steady state operation of the motor, a load having characteristics sufficient to prevent obtaining normal synchronous operation of the motor when the motor is operatively connected to the load in the absence of the soft-start coupling.

Umans, Stephen D; Nisley, Donald L; Melfi, Michael J

2014-10-28T23:59:59.000Z

216

Author's personal copy Research report  

E-Print Network [OSTI]

for reaching have been shown in the posterior parietal cortex (PPC) (Battaglia-Mayer et al., 2003; Batista et-motor cortex (Battaglia-Mayer et al., 2003; Batist

Blohm, Gunnar

217

Electric Motor Remanufacturing and Energy Savings Sahil Sahni1  

E-Print Network [OSTI]

Electric Motor Remanufacturing and Energy Savings Sahil Sahni1 , Avid Boustani1 , Timothy Gutowski to this study. #12;Contents 1 Introduction to Electric Motors 1 1.1 Motor Classifications of Figures 1 Motor System Electricity Consumption by Industrial Sectors (TWh) for 1994. A total of 691

Gutowski, Timothy

218

The LatestThe LatestThe LatestThe Latest,,,, Quick Motor EvaluationQuick Motor EvaluationQuick Motor EvaluationQuick Motor Evaluation Myway Plus Development of Specialized Equipment  

E-Print Network [OSTI]

is different from the mainstream PM motor, the rotor does not use neodymium but electrically magnetized body. The simple structure and half price of PM motor equipment is highly anticipated in hybrid electric vehicleThe LatestThe LatestThe LatestThe Latest,,,, Quick Motor EvaluationQuick Motor Evaluation

Kambhampati, Patanjali

219

EE443L Lab 2: Modeling a DC Motor Introduction  

E-Print Network [OSTI]

: In this lab we will develop and validate a basic model of a permanent magnet DC motor (Yaskawa Electric MINI: The DC motor is a common actuator in control systems that converts electrical energy into rotational Procedure: Through the following steps, motor parameters for the Yaskawa Electric MINI-Minertia motor

Wedeward, Kevin

220

A University of Alabama Axial-Gap Electric Motor Developmenty  

E-Print Network [OSTI]

CAVT A University of Alabama Axial-Gap Electric Motor Developmenty Research Center OBJECTIVE ­ Develop axial gap permanent-magnet electric Axial motor ­ Develop axial gap permanent-magnet electric motor topologies with high torque and power densities MOTIVATION ­ Axial-gap ("pancake") motors have

Carver, Jeffrey C.

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Convective Cooling and Passive Stack Improvements in Motors (Presentation)  

SciTech Connect (OSTI)

This presentation discusses current research at NREL in convective cooling and passive stack improvements in motors.

Bennion, K.

2014-06-01T23:59:59.000Z

222

Understanding premium-efficiency motor economics  

SciTech Connect (OSTI)

This paper reports that from a numerical standpoint, motors in continuous-duty service comprise only a fraction of those used in America's industrial plants. Not all plant engineers, however, are aware that the relatively few motors in continuous-duty service account for about 75% of all industrial electrical use. For motors in continuous-duty service, a few percentage points gain in efficiency can yield tremendous reductions in the plant electric bill energy charge. Acknowledgment of this fact has spawned the common practice of replacing less-efficient motors with types of more energy-efficient design. However, arbitrary application of this retrofit practice can be a costly mistake. To maximize return on investment, some basic factors must be understood and considered.

Hirzel, J. (GE Motors, Fort Wayne, IN (US))

1992-04-30T23:59:59.000Z

223

SENSORLESS INDUCTION MOTOR CONTROL USING STATISTICAL  

E-Print Network [OSTI]

is replaced by npM so that the dynamic model of the induction motor is then uSa = RSiSa + LS d dtiSa + M d dti

224

Energy Savings of Variable Speed Motors  

E-Print Network [OSTI]

This paper investigates the energy savings available by utilizing variable speed motors on pump and fan applications. Conventional control of flow or pressure in process plants is normally accomplished by throttling the various streams with control...

Fishel, F. D.

1979-01-01T23:59:59.000Z

225

Products of motor burnout. Final report  

SciTech Connect (OSTI)

The Montreal Protocol of 1987 effectively banned a long list of chlorofluorocarbons (CFCs) traditionally used in air conditioning and refrigeration applications. The refrigeration and air conditioning industries have responded by developing and testing new, alternative refrigerants that are less damaging to the atmosphere upon release. Despite a reputation for quality and reliability, air conditioning systems do occasionally fail. One of the more common failure modes in a hermetic system is a motor burnout. Motor burnouts can occur by various mechanisms. One of the most common scenarios is a locked motor rotor, which may result from a damaged bearing. The resulting electrical motor burnout is caused by overheating of the locked rotor and subsequent failure of the insulation. This is primarily a thermal breakdown process.

Hawley-Fedder, R.; Goerz, D.; Koester, C.; Wilson, M.

1996-03-30T23:59:59.000Z

226

Method and apparatus for large motor control  

DOE Patents [OSTI]

Apparatus and method for providing digital signal processing method for controlling the speed and phase of a motor involves inputting a reference signal having a frequency and relative phase indicative of a time based signal; modifying the reference signal to introduce a slew-rate limited portion of each cycle of the reference signal; inputting a feedback signal having a frequency and relative phase indicative of the operation of said motor; modifying the feedback signal to introduce a slew-rate limited portion of each cycle of the feedback signal; analyzing the modified reference signal and the modified feedback signal to determine the frequency of the modified reference signal and of the modified feedback signal and said relative phase between said modified reference signal and said modified feedback signal; and outputting control signals to the motor for adjusting said speed and phase of the motor based on the frequency determination and determination of the relative phase.

Rose, Chris R. (Santa Fe, NM); Nelson, Ronald O. (White Rock, NM)

2003-08-12T23:59:59.000Z

227

Solid State AC Motor Drives - Conservation Perspectives  

E-Print Network [OSTI]

This paper presents and discusses techniques for energy conservation by reducing losses in ac motor driven systems, proposed by the technical community in response to surging cost of energy. An important aspect considered is the impact on electric...

Mohan, N.; Ferraro, R. J.

1982-01-01T23:59:59.000Z

228

Total Energy Management in General Motors  

E-Print Network [OSTI]

This paper presents an overview of General Motors' energy management program with special emphasis on energy conservation. Included is a description of the total program organization, plant guidelines, communication and motivation techniques...

DeKoker, N.

1979-01-01T23:59:59.000Z

229

Ammarin Daranpob Personal Data  

E-Print Network [OSTI]

Engineering, Water Resources M.S. Civil Engineering, Texas A&M University ­ Kingsville (TAMUK), 2002 Majors impacts due to the Global Climate Change o Sub-surfaced wetland design for nutrient removal o Metropolitan Restoration Program) ASR Alkalinity, Metal, and Mineral Impacts on Phosphorus Fate and Transport in Lake

Central Florida, University of

230

Efficiency test on the Buchanan pump motor  

E-Print Network [OSTI]

representing the Lower Colorado River Authority, Fargo Engineering Company~ and the Westinghouse Electric Corporation began conducting the necessary tests to determine the efficiency of the machine, The first test conducted obtained data for a no... excitation the motor breaker was tripped and the motor allowed to decelerate, The Buchanan powerhouse synchroscope was used to determine the time at which the mctor was turning at rated speed. On a signal from the operator at that instant simultaneous...

Krezdorn, Roy Rankin

1954-01-01T23:59:59.000Z

231

Equivalent Circuit Modeling of Hysteresis Motors  

SciTech Connect (OSTI)

We performed a literature review and found that many equivalent circuit models of hysteresis motors in use today are incorrect. The model by Miyairi and Kataoka (1965) is the correct one. We extended the model by transforming it to quadrature coordinates, amenable to circuit or digital simulation. 'Hunting' is an oscillatory phenomenon often observed in hysteresis motors. While several works have attempted to model the phenomenon with some partial success, we present a new complete model that predicts hunting from first principles.

Nitao, J J; Scharlemann, E T; Kirkendall, B A

2009-08-31T23:59:59.000Z

232

Direct-drive field actuator motors  

DOE Patents [OSTI]

A high-torque, low speed, positive-drive field actuator motor is disclosed including a stator carrying at least one field actuator which changes in dimension responsive to application of an energy field, and at least one drive shoe movable by the dimensional changes of the field actuator to contact and move a rotor element with respect to the stator. Various embodiments of the motor are disclosed, and the rotor element may be moved linearly or arcuately. 37 figs.

Grahn, A.R.

1995-07-11T23:59:59.000Z

233

Transportation Market Distortions  

E-Print Network [OSTI]

of Highways, Volpe National Transportation Systems Center (Evaluating Criticism of Transportation Costing, VictoriaFrom Here: Evaluating Transportation Diversity, Victoria

Litman, Todd

2006-01-01T23:59:59.000Z

234

Halbach array DC motor/generator  

DOE Patents [OSTI]

A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An "inside-out" design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then "switched" or "commutated" to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives.

Merritt, Bernard T. (Livermore, CA); Dreifuerst, Gary R. (Livermore, CA); Post, Richard F. (Walnut Creek, CA)

1998-01-01T23:59:59.000Z

235

Halbach array DC motor/generator  

DOE Patents [OSTI]

A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An ``inside-out`` design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then ``switched`` or ``commutated`` to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives. 17 figs.

Merritt, B.T.; Dreifuerst, G.R.; Post, R.F.

1998-01-06T23:59:59.000Z

236

Persons under 18 may NOT: Drive a vehicle or forklift (except golf carts in certain circumstances)  

E-Print Network [OSTI]

, transport, or dispose of cooking oil or grease hotter than 100 degrees Fahrenheit · Work in freezers or meat.g., pool or billiard room, or bowling alley) · Work in barber shops · Work in construction, transportation for persons under age 18 For questions about wages or the child labor laws: Massachusetts Office

Fraden, Seth

237

Personality and group interaction  

E-Print Network [OSTI]

that "prize Chips will be awarded equally to each person in the group based on the total number of blocks still standing in the tower at the end of the 15 seconds". b) In the contrient condition, subjects were told that "Prize Chips will be awarded only... to the individual with the most blocks still standing in the tower at the end of the 15 seconds. If there are any ties in terms of the number blocks on the tower and there is no clear winner, then no prize chips will be distributed". 6. Only one tower may...

Hair, Elizabeth Catherine

1996-01-01T23:59:59.000Z

238

Personal continuous air monitor  

DOE Patents [OSTI]

A personal continuous air monitor capable of giving immediate warning of the presence of radioactivity has a filter/detector head to be worn in the breathing zone of a user, containing a filter mounted adjacent to radiation detectors, and a preamplifier. The filter/detector head is connected to a belt pack to be worn at the waist or on the back of a user. The belt pack contains a signal processor, batteries, a multichannel analyzer, a logic circuit, and an alarm. An air pump also is provided in the belt pack for pulling air through the filter/detector head by way of an air tube.

Morgan, Ronald G. (Los Alamos, NM); Salazar, Samuel A. (Albuquerque, NM)

2000-01-01T23:59:59.000Z

239

PIA - Human Resources - Personal Information Change Request ...  

Office of Environmental Management (EM)

PIA - Human Resources - Personal Information Change Request - Idaho National Engineering Laboratory PIA - Human Resources - Personal Information Change Request - Idaho National...

240

Ratchet for energy transport between identical reservoirs Souvik Das,1,  

E-Print Network [OSTI]

Ratchet for energy transport between identical reservoirs Souvik Das,1, * Onuttom Narayan,2 of the many realizations of this concept of a ``Brownian ratchet'' and their relevance to the working of motor,3 . Implementations of the ratchet idea generally involve randomly forced particles in periodic, non

California at Santa Cruz, University of

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Oilfield surveillance using personal computers  

SciTech Connect (OSTI)

Personal computers and hand-held calculators were used in the development of an oilfield surveillance and data gathering system. Producing wells, steam injection wells, water plants, steam generators, and well workovers are all monitored through the use of personal computers. Personal computers provide an accurate and timely method of verifying and editing data as well as providing immediate retrieval of information vital to the daily operation of a thermal recovery oilfield.

Moore, J.B.

1985-03-01T23:59:59.000Z

242

E-Print Network 3.0 - advanced ac motor Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for a QE2 synchronous motor... in motor applications < 110 the energy required for 4K refrigeration HTS enhances commercial economics... Motors and Generators HTS enables...

243

Impact of California Reformulated Gasoline On Motor Vehicle Emissions. 1. Mass Emission Rates  

E-Print Network [OSTI]

California reformulated gasoline on motor vehicle emissions.Impact of California Reformulated Gasoline OIl Motor Vehicleprogress, increased vehicle Gasoline Motor on Vehicle travel

Kirchstetter, Thomas W.; Singer, Brett C.; Harley, Robert A.

1999-01-01T23:59:59.000Z

244

Scholarship Search Profile Personal Information  

E-Print Network [OSTI]

Scholarship Search Profile Personal Information Name: ____________________________________ Address) ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ Work Experience: List most recent job first Employer/Company Name _______________________________________________________________ Reference: Name and telephone _____________________________________________ Employer/Company Name

Mather, Patrick T.

245

Government Personal Property Asset Management  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

Establishes procedures for managing Government personal property owned or leased by and in the custody of Department of Energy (DOE) Headquarters employees. Cancels HQ 1400.1.

1998-05-11T23:59:59.000Z

246

The China Motor Systems Energy Conservation Program: A major national initiative to reduce motor system energy use in China  

SciTech Connect (OSTI)

Electric motor systems are widely used in China to power fans, pumps, blowers, air compressors, refrigeration compressors, conveyers, machinery, and many other types of equipment. Overall, electric motor systems consume more than 600 billion kWh annually, accounting for more than 50 percent of China's electricity use. There are large opportunities to improve the efficiency of motor systems. Electric motors in China are approximately 2-4 percent less efficient on average than motors in the U.S. and Canada. Fans and pumps in China are approximately 3-5 percent less efficient than in developed countries. Even more importantly, motors, fans, pumps, air compressors and other motor-driven equipment are frequently applied with little attention to system efficiency. More optimized design, including appropriate sizing and use of speed control strategies, can reduce energy use by 20 percent or more in many applications. Unfortunately, few Chinese enterprises use or even know about these energy-saving practices. Opportunities for motor system improvements are probably greater in China than in the U.S. In order to begin capturing these savings, China is establishing a China Motor Systems Energy Conservation Program. Elements of this program include work to develop minimum efficiency standards for motors, a voluntary ''green motor'' labeling program for high-efficiency motors, efforts to develop and promote motor system management guidelines, and a training, technical assistance and financing program to promote optimization of key motor systems.

Nadel, Steven; Wang, Wanxing; Liu, Peter; McKane, Aimee T.

2001-05-31T23:59:59.000Z

247

MIE -H&S -08 -Personal Protection Personal Protection  

E-Print Network [OSTI]

type of work. Safety glasses 2. Safety boots are optional, except when heavy parts are to be moved or worked on. Open toe shoes must not worn at the work site or in the laboratories. Safety boots 3. GlovesMIE - H&S - 08 - Personal Protection Personal Protection 1. Safety glasses must be worn when any

248

Severe environment turbine powered steerable motors  

SciTech Connect (OSTI)

Turbine powered downhole motors have advantages for high temperature, high pressure, sour gas or hard formation drilling which stem from turbodrill construction rather than metallurgy, and from their power characteristics. The first part of the paper will discuss this, and compare turbine and Moineau powered motors in this context. The introduction in the last three years of new bearing materials, hydraulic thrust balancing devices and high performance flexible couplings have extended turbodrill performance and reliability margins in severe environment drilling. It is perfecting feasible to build steerable motors capable of drilling for 250 hours in 6-in. hole at 200 degrees Celsius (392 degrees Fahrenheit) in a deviated high pressure well since the individual problems in this ``Well from Hell`` have successfully been overcome. The second part of the paper will illustrate this through field examples.

Gaynor, T.M. [Neyrfor-Weir Ltd., Aberdeen (United Kingdom). Dept. of Operations

1995-12-31T23:59:59.000Z

249

Motor current signature analysis for determining operational readiness of motor-operated valves (MOVs)  

SciTech Connect (OSTI)

Motor current signature analysis (MCSA) is a novel diagnostic process for condition monitoring of electric-motor-driven mechanical equipment (e.g., pumps, motor-operated valves, compressors, and processing machinery). The MCSA process identifies, characterizes, and trends over time the instantaneous load variations of mechanical equipment in order to diagnose changes in the condition of the equipment (e.g., due to degradation or service wear), which, if allowed to continue, may lead to failure. It monitors the instantaneous variations (noise content) in the electric current flowing through the power leads to the electric motor that drives the equipment. The motor itself thereby acts as a transducer, sensing both large and small, long-term and rapid, mechanical load variations and converting them to variations in the induced current generated in the motor windings. This motor current noise signature is detected, amplified, and further processed as needed to examine its time domain and frequency domain (spectral) characteristics. The operational principles of MCSA and the nonintrusive data collection apparatus and procedure used with MOVs will be described. Data collected from MOVs in both laboratory and in-plant environments will also be shown to illustrate the ability of MCSA to ''see'' the detailed inner workings of the valve and operator and thus to detect degraded performance at an incipient stage. (Set of 18 vugraphs)

Kryter, R.C.; Haynes, H.D.

1987-01-01T23:59:59.000Z

250

Author's personal copy Slower postnatal motor development in infants of mothers with latent toxoplasmosis  

E-Print Network [OSTI]

a , Jaroslav Flegr a a Department of Philosophy and History of Science, Faculty of Science, Charles University and an associated risk of a sieve effect, our results should be considered as preliminary and performing a large effects of latent toxoplasmosis on the risk of abortion; however, this speculation was not confirmed

Flegr, Jaroslav

251

Advanced motor driven clamped borehole seismic receiver  

DOE Patents [OSTI]

A borehole seismic tool is described including a borehole clamp which only moves perpendicular to the borehole. The clamp is driven by an electric motor, via a right angle drive. When used as a seismic receiver, the tool has a three part housing, two of which are hermetically sealed. Accelerometers or geophones are mounted in one hermetically sealed part, the electric motor in the other hermetically sealed part, and the clamp and right angle drive in the third part. Preferably the tool includes cable connectors at both ends. Optionally a shear plate can be added to the clamp to extend the range of the tool.

Engler, B.P.; Sleefe, G.E.; Striker, R.P.

1993-02-23T23:59:59.000Z

252

Soft-commutated direct current motor  

DOE Patents [OSTI]

A method and circuit is disclosed for soft-commutation of a direct current (DC) motor. An attenuation circuit is connected through auxiliary brushes A, A[prime], B and B[prime] to the commutator (16) to drain circuit from successive armature coils (15) before the main brushes (27, 28) disconnects from each of the coils (15). This prevents the spark generation that normally occurs in conventional DC motors. The attenuation circuit may also be connected before energization of the coil (15) for a soft turning on operation. 13 figs.

Hsu, J.S.

1999-07-27T23:59:59.000Z

253

Designing the Personal Data Stream: Enabling Participatory Privacy in Mobile Personal Sensing  

E-Print Network [OSTI]

Awareness Forum. (2009). Personal Data Guardianship Code.form of distributed personal data collection (Eagle, 2008;to collect and respond to personal data about their habits,

2009-01-01T23:59:59.000Z

254

Modeling Reluctance-Assisted PM Motors  

SciTech Connect (OSTI)

This report contains a derivation of the fundamental equations used to calculate the base speed, torque delivery, and power output of a reluctance-assisted PM motor which has a saliency ratio greater than 1 as a function of its terminal voltage, current, voltage-phase angle, and current-phase angle. The equations are applied to model Motor X using symbolically-oriented methods with the computer tool Mathematica to determine: (1) the values of current-phase angle and voltage-phase angle that are uniquely determined once a base speed has been selected; (2) the attainable current in the voltage-limited region above base speed as a function of terminal voltage, speed, and current-phase angle; (3) the attainable current in the voltage-limited region above base speed as a function of terminal voltage, speed, and voltage-phase angle; (4) the maximum-power output in the voltage-limited region above base speed as a function of speed; (5) the optimal voltage-phase angle in the voltage-limited region above base speed required to obtain maximum-power output; (6) the maximum-power speed curve which was linear from rest to base speed in the current limited region below base speed; (7) the current angle as a function of saliency ratio in the current-limited region below base speed; and (8) the torque as a function of saliency ratio which is almost linear in the current-limited region below base speed. The equations were applied to model Motor X using numerically-oriented methods with the computer tool LabVIEW. The equations were solved iteratively to find optimal current and voltage angles that yield maximum power and maximum efficiency from rest through the current-limited region to base speed and then through the voltage-limited region to high-rotational speeds. Currents, voltages, and reluctance factors were all calculated and external loops were employed to perform additional optimization with respect to PM pitch angle (magnet fraction) and with respect to magnet strength. The conclusion was that the optimal-magnet fraction for Motor X is 0.72 which corresponds to a PM pitch angle of 130{sup o}, a value close to the maximum-saliency ratio in a plot of saliency ratio versus PM pitch angle. Further, the strength of Motor X magnets may be lowered to 80% of full strength without significantly impacting motor performance for PM pitch angles between the peak saliency (130{sup o}) and peak-characteristic current (160{sup o}). It is recommended that future research involve maximizing a driving-cycle-weighted efficiency based on the Federal Urban Driving Cycle and the Federal Highway Driving Cycle as criteria for selecting the final optimal-PM fraction and magnet strength for this inset PM motor. Results of this study indicate that the reduction in PM torque due to reduced-magnet fraction will be more than compensated by the reluctance torque resulting from the higher saliency ratio. It seems likely that the best overall performance will require saliency; consequently, we think the best motor will be a reluctance-assisted PM motor. This should be explored for use with other types of PM motors, such as fractional-slot motors with concentrated windings.

Otaduy, P.J.

2006-01-13T23:59:59.000Z

255

Modeling and characterization of a voice coil motor  

E-Print Network [OSTI]

This thesis describes the development of a voice-coil motor that will allow viscous fluids to be delivered via a portable needle-free injection device. The chosen motor design features opposing magnets whose flux is channeled ...

Brown, Ashley (Ashley A.)

2012-01-01T23:59:59.000Z

256

New Energy Efficiency Standards for Electric Motors and Walk...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Motors and Walk-in Coolers and Freezers to Save on Energy Bills and Reduce Carbon Pollution New Energy Efficiency Standards for Electric Motors and Walk-in Coolers and Freezers...

257

9.373 Somatosensory and Motor Systems, Spring 2002  

E-Print Network [OSTI]

General principles of motor control in biological systems. Structure and function of sensory receptors. Muscle structure and reflex arcs. Spinal cord. Locomotion. Oculomotor control. Cerebellar structure and function. Motor ...

Bizzi, Emilio

258

Variable Frequency Drives: Energy Savings and Impact on Motor Performance  

E-Print Network [OSTI]

, and Pitfalls: Motor Acoustic Noise, Motor Heating. This paper is intended for plant engineers and maintenance personnel who have some practical experience with electrical and mechanical equipment, but are not VFD experts....

Petro, D.

259

The Binding of Learning to Action in Motor Adaptation  

E-Print Network [OSTI]

In motor tasks, errors between planned and actual movements generally result in adaptive changes which reduce the occurrence of similar errors in the future. It has commonly been assumed that the motor adaptation arising ...

Gonzalez Castro, Luis Nicolas

260

Secrets of the Motor That Drives Archaea Revealed  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Secrets of the Motor That Drives Archaea Revealed Secrets of the Motor That Drives Archaea Revealed Print Thursday, 14 February 2013 00:00 An international team led by John Tainer...

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Case Studies of High Efficiency Electric Motor Applicability  

E-Print Network [OSTI]

Much has been written about the advantages and disadvantages of high efficiency electric motors. For a given motor application it is possible to find literature that enables a plant engineer to make an informed choice between a standard efficiency...

Wagner, J. R.

262

An Examination of Motor Skills in Children who Stutter  

E-Print Network [OSTI]

Recently, research has postulated that stuttering is a motor disorder that results from brain abnormalities within the central nervous system. Based on evidence of numerous irregularities within various motor systems, it has been suggested...

2012-10-19T23:59:59.000Z

263

Low-cost motor drive embedded fault diagnosis systems  

E-Print Network [OSTI]

Electric motors are used widely in industrial manufacturing plants. Bearing faults, insulation faults, and rotor faults are the major causes of electric motor failures. Based on the line current analysis, this dissertation mainly deals with the low...

Akin, Bilal

2009-05-15T23:59:59.000Z

264

Transient Peak Currents in Permanent Magnet Synchronous Motors  

E-Print Network [OSTI]

synchronous motors (PMSM) became more and more popular for these applications. The performance of PMSM drives not be triggered at motor operating points, for which the SSC current behavior will damage the PMSM drive. An analysis of PMSM behavior with

Paderborn, Universität

265

Packet personal radiation monitor  

DOE Patents [OSTI]

A personal radiation monitor of the chirper type is provided for detecting ionizing radiation. A battery powered high voltage power supply is used to generate and apply a high voltage bias to a G-M tube radiation sensor. The high voltage is monitored by a low-loss sensing network which generates a feedback signal to control the high voltage power supply such that the high voltage bias is recharged to +500 VDC when the current pulses of the sensor, generated by the detection of ionizing radiatonevents, discharges the high voltage bias to +450 VDC. During the high voltage recharge period an audio transducer is activated to produce an audible ''chirp''. The rate of the ''chirps'' is controlled by the rate at which the high voltage bias is recharged, which is proportional to the radiation field intensity to which the sensor is exposed. The chirp rate sensitivity is set to be approximately 1.5 (chirps/min/MR/hr.). The G-M tube sensor is used in a current sensing mode so that the device does not paralyze in a high radiation field. 2 figs.

Phelps, J.E.

1988-03-31T23:59:59.000Z

266

Packet personal radiation monitor  

DOE Patents [OSTI]

A personal radiation monitor of the chirper type is provided for detecting ionizing radiation. A battery powered high voltage power supply is used to generate and apply a high voltage bias to a G-M tube radiation sensor. The high voltage is monitored by a low-loss sensing network which generates a feedback signal to control the high voltage power supply such that the high voltage bias is recharged to +500 VDC when the current pulses of the sensor, generated by the detection of ionizing radiation events, discharges the high voltage bias to +450 VDC. During the high voltage recharge period an audio transducer is activated to produce an audible "chirp". The rate of the "chirps" is controlled by the rate at which the high voltage bias is recharged, which is proportional to the radiation field intensity to which the sensor is exposed. The chirp rate sensitivity is set to be approximately 1.5 (chirps/min/MR/hr.). The G-M tube sensor is used in a current sensing mode so that the device does not paralyze in a high radiation field.

Phelps, James E. (Knoxville, TN)

1989-01-01T23:59:59.000Z

267

Neurotransmitter Transporters  

E-Print Network [OSTI]

at specialized synaptic junctions where electrical excitability in the form of an action potential is translated membrane of neurons and glial cells. Transporters harness electrochemical gradients to force the movement.els.net #12;The response produced when a transmitter interacts with its receptors, the synaptic potential

Bergles, Dwight

268

Motor Packaging with Consideration of Electromagnetic and Material...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Documents & Publications Motor Packaging with Consideration of Electromagnetic and Material Characteristics Alnico and Ferrite Hybrid Excitation Electric Machines Wireless Charging...

269

Extended cage adjustable speed electric motors and drive packages  

DOE Patents [OSTI]

The rotor cage of a motor is extended, a second stator is coupled to this extended rotor cage, and the windings have the same number of poles. The motor torque and speed can be controlled by either injecting energy into or extracting energy out from the rotor cage. The motor produces less harmonics than existing doubly-fed motors. Consequently, a new type of low cost, high efficiency drive is produced. 12 figs.

Hsu, J.S.

1999-03-23T23:59:59.000Z

270

Extended cage adjustable speed electric motors and drive packages  

DOE Patents [OSTI]

The rotor cage of a motor is extended, a second stator is coupled to this extended rotor cage, and the windings have the same number of poles. The motor torque and speed can be controlled by either injecting energy into or extracting energy out from the rotor cage. The motor produces less harmonics than existing doubly-fed motors. Consequently, a new type of low cost, high efficiency drive is produced.

Hsu, John S. (Oak Ridge, TN)

1999-01-01T23:59:59.000Z

271

VIRTUAL E-MOTOR AS A TOOL FOR THE DEVELOPMENT  

E-Print Network [OSTI]

is the motor model employed by the emulator. Standard models have limited performance, such as the linear PMSM

Paderborn, Universität

272

Optimal Current Waveforms for Brushless Permanent Magnet Motors  

E-Print Network [OSTI]

;1 Introduction We consider the problem of controlling an AC permanent magnet synchronous motor (PMSM) by choosing

273

DIVISION OF RECREATIONAL SPORTS Personal Training  

E-Print Network [OSTI]

Information Personal Training Policies Waiver Client Data Questionnaire Health Status Questionnaire PersonalDIVISION OF RECREATIONAL SPORTS Personal Training New Client Packet Personal Training Package to Purdue Rec Sports Personal Training Getting Started The information included in this packet is everything

Pittendrigh, Barry

274

An analysis of induction motor testing techniques  

SciTech Connect (OSTI)

There are two main failure mechanisms in induction motors: bearing related and stator related. The Electric Power Research Institute (EPRI) conducted a study which was completed in 1985, and found that near 37% of all failures were attributed to stator problems. Another data source for motor failures is the Nuclear Plant Reliability Data System (NPRDS). This database reveals that approximately 55% of all motors were identified as being degraded before failure occurred. Of these, approximately 35% were due to electrical faults. These are the faults which this paper will attempt to identify through testing techniques. This paper is a discussion of the current techniques used to predict incipient failure of induction motors. In the past, the main tests were those to assess the integrity of the ground insulation. However, most insulation failures are believed to involve turn or strand insulation, which makes traditional tests alone inadequate for condition assessment. Furthermore, these tests have several limitations which need consideration when interpreting the results. This paper will concentrate on predictive maintenance techniques which detect electrical problems. It will present appropriate methods and tests, and discuss the strengths and weaknesses of each.

Soergel, S. [Entergy Operations Inc., Killona, LA (United States)

1996-12-31T23:59:59.000Z

275

Theories of rotary motors Richard M. Berry  

E-Print Network [OSTI]

and the `proton turbine' model of La¬ę uger or Berry. Models such as these are typically represented by a small connected to an extracellular helical propeller. The motor is powered by the ¬£ow of ions down to the helical propeller, or `¬Ęlament'. The stator is a ring of particles in the cytoplasmic membrane, containing

Berry, Richard

276

January 08 1 Ford -Chrysler -General Motors  

E-Print Network [OSTI]

January 08 1 Ford - Chrysler - General Motors DOE Fuel Cell Pre-Solicitation Workshop worthy - and not worthy - of study in the DOE Fuel Cell Subprogram · Categories described within DOE Fuel for Study · PGM cathode catalysts, mass activity > 0.44 A/mgPGM ­ Core/shell ­ Structure-controlled PGM

277

The Head-Neck Sensory Motor System  

E-Print Network [OSTI]

The Head-Neck Sensory Motor System Edited by Alain Berthoz Laboratoire de Physiologie, sideslip, and thrust) determine its loca- tion in space, and rotations (yaw, pitch, and roll) change its, no functional significance can be attributed to this multiple sampling. Oculomotor System of Calliphora

278

Working With Your Motor Service Center  

E-Print Network [OSTI]

For the end user of electric motors, it is important to maximize repair quality at minimum cost. At the same time, most recognize the truth in the old adage "You get what you pay for." Coordination of the expectations of the end user and service...

Yung, C.

279

3M's Motor Challenge Showcase Demonstration Project  

E-Print Network [OSTI]

In January 1994, 3M began the task of optimizing the electric motor systems at 3M Center, a 26 building, 7 million square foot corporate campus. A cross-functional, cross-company team was established which included four 3M employees representing two...

Schultz, S. C.

280

Designing Alternatives to State Motor Fuel Taxes  

E-Print Network [OSTI]

Designing Alternatives to State Motor Fuel Taxes All states rely on gasoline taxes as one source efficiency and alternative fuel vehicles reduce both the equity of the revenue source and its growth over, leading to higher fuel efficiency, wide variations in fuel efficiency, and alternative- fuel vehicles

Bertini, Robert L.

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Physical context management for a motor vehicle  

DOE Patents [OSTI]

Computer software for and a method of enhancing safety for an operator of a motor vehicle comprising employing a plurality of sensors of vehicle and operator conditions, matching collective output from the sensors against a plurality of known dangerous conditions, and preventing certain activity of the operator if a known dangerous condition is detected.

Dixon, Kevin R. (Albuquerque, NM); Forsythe, James C. (Sandia Park, NM); Lippitt, Carl E. (Albuquerque, NM); Lippitt, legal representative, Lois Diane (Albuquerque, NM)

2009-10-27T23:59:59.000Z

282

QER- Comment of Honda Motor Co., Inc.  

Broader source: Energy.gov [DOE]

Attached please find comments for the record for the Quadrennial Energy Review : Comment on the Public Meeting ďEnhancing Infrastructure Resiliency,Ē Held April 11, 2014, Washington, D.C. filed on behalf of American Honda Motor Co., Inc. If you have any questions, please contact the undersigned.

283

Sensorless performance evaluation of induction motors  

E-Print Network [OSTI]

inertia, are seen to be crucial factors in the torque calculation process. Then, a study of saliency induced harmonics and their generation in a three phase induction motor follows. Presently, well established theory will be touched upon in order to aid...

Ahmed, Shehab

2000-01-01T23:59:59.000Z

284

Early Imaging Correlates of Subsequent Motor Recovery after Stroke  

E-Print Network [OSTI]

Early Imaging Correlates of Subsequent Motor Recovery after Stroke Randolph S. Marshall, MS, MD days after stroke correlates with subsequent motor recovery. Methods: Twenty-three patients with hemiparesis after first-time stroke were scanned at 2.0 0.9 days while performing a simple motor task. We

285

Lagrangean Decomposition Algorithm for Supply Chain Redesign of Electric Motors  

E-Print Network [OSTI]

Lagrangean Decomposition Algorithm for Supply Chain Redesign of Electric Motors Industry Yongheng Redesign of Electric Motors Industry Introduction of the Supply Chain Model 3/22/13 2 Analia Rodriguez #12 Decomposition Algorithm for Supply Chain Redesign of Electric Motors Industry #12;Lagrangean Decomposition

Grossmann, Ignacio E.

286

Demodulation circuit for AC motor current spectral analysis  

DOE Patents [OSTI]

A motor current analysis method for the remote, noninvasive inspection of electric motor-operated systems. Synchronous amplitude demodulation and phase demodulation circuits are used singly and in combination along with a frequency analyzer to produce improved spectral analysis of load-induced frequencies present in the electric current flowing in a motor-driven system.

Hendrix, Donald E. (Oak Ridge, TN); Smith, Stephen F. (Knoxville, TN)

1990-12-18T23:59:59.000Z

287

Reducing current reversal time in electric motor control  

DOE Patents [OSTI]

The time required to reverse current flow in an electric motor is reduced by exploiting inductive current that persists in the motor when power is temporarily removed. Energy associated with this inductive current is used to initiate reverse current flow in the motor.

Bredemann, Michael V

2014-11-04T23:59:59.000Z

288

Summary of electric vehicle dc motor-controller tests  

SciTech Connect (OSTI)

Available performance data for production motors are usually of marginal value to the electric vehicle designer. To provide at least a partial remedy to this situation, tests of typical dc propulsion motors and controllers were conducted as part of the DOE Electric Vehicle Program. The objectives of this program were to evaluate the differences in the performance of dc motors when operating with chopper-type controllers and when operating on direct current; and to gain an understanding of the interactions between the motor and the controller which cause these differences. Toward this end, motor-controller tests performed by the NASA Lewis Research Center provided some of the first published data that quantified motor efficiency variations for both ripple-free (straight dc) and chopper modes of operation. Test and analysis work at the University of Pittsburgh explored motor-controller relationships in greater depth. And to provide additional data, 3E Vehicles tested two small motors, both on a dynamometer and in a vehicle, and the Eaton Corporation tested larger motors, using sophisticated instrumentation and digital processing techniques. All the motors tested were direct-current types. Of the separately excited types, seven were series wound and two were shunt wound. One self-excited permanent magnet type was also tested. Four of the series wound motors used brush shifting to obtain good commutation. In almost all cases, controller limitations constrained the test envelope so that the full capability of the motors could not be explored.

McBrien, E F; Tryon, H B

1982-09-01T23:59:59.000Z

289

Minireview 501 Kinesin and myosin: molecular motors with similar engines  

E-Print Network [OSTI]

Minireview 501 Kinesin and myosin: molecular motors with similar engines Ivan Rayment Structure molecu- lar motors that fulfill many of these tasks. These fall into three general classes of molecular motor exhibits the same architecture as myosin and suggests that these microtubule- and actin

Rayment, Ivan

290

Propagating waves mediate information transfer in the motor cortex  

E-Print Network [OSTI]

Propagating waves mediate information transfer in the motor cortex Doug Rubino1, Kay A Robbins2-delay reaching task, we found that these oscillations propagated as waves across the surface of the motor cortex oscillations propagated as waves across the primary motor (MI) and premotor (PMd) cortices as monkeys planned

Hatsopoulos, Nicholas

291

Motor Pool Department The Motor Pool Department is responsible for the maintenance of over 550 Georgia Tech state  

E-Print Network [OSTI]

value of $3,000 or more. · Perform preventive maintenance (PM) on vehicles, LSVs, golf cartsMotor Pool Department The Motor Pool Department is responsible for the maintenance of over 550

292

GT Human Resources PERSONAL DATA FORM  

E-Print Network [OSTI]

GT Human Resources PERSONAL DATA FORM Page 1 Updated: 05/01/2014 Student Employee? Yes No Print clearly using black or blue ink. Personal Information Name) __________________________________________________________________________________________ (City) (State) (Zip) (County) Personal Telephone #: (_______)________-__________ GT Work Telephone

Jacobs, Laurence J.

293

GT Human Resources PERSONAL DATA FORM  

E-Print Network [OSTI]

GT Human Resources PERSONAL DATA FORM Page 1 Updated: 0//201 Student Employee? Yes No Print clearly.: _________________________________ Job Title: Email: _________________________________ #12;GT Human Resources PERSONAL DATA FORM Page 2 using black or blue ink. Personal Information Name

Garmestani, Hamid

294

GT Human Resources PERSONAL DATA FORM  

E-Print Network [OSTI]

GT Human Resources PERSONAL DATA FORM Page 1 Updated: 05/01/2014 Student Employee? Yes No Print.: _________________________________ Job Title: _________________________________ #12;GT Human Resources PERSONAL DATA FORM Page 2 Updated clearly using black or blue ink. Personal Information Name

Jacobs, Laurence J.

295

An Online Tool for Personal Data Collection and Exploration  

E-Print Network [OSTI]

2 Personal Data and156 B.1 Personal Data Applications . . . . . . . . . . . .de- signed for personal data and the everyday and discuss

Yau, Nathan Chun-Yin

2013-01-01T23:59:59.000Z

296

NREL: Transportation Research - Transportation and Hydrogen Newsletter...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

The Future of Sustainable Transportation This is the January 2015 issue of the Transportation and Hydrogen Newsletter. Illustration of an electric vehicle Illustration of an...

297

Chemistry of Personalized Solar Energy  

E-Print Network [OSTI]

Personalized energy (PE) is a transformative idea that provides a new modality for the planetís energy future. By providing solar energy to the individual, an energy supply becomes secure and available to people of both ...

Nocera, Daniel G.

298

Stephen Bruce Vardeman Personal Data  

E-Print Network [OSTI]

1 5/13 Stephen Bruce Vardeman Personal Data Citizenship: U.S.A. Security Clearance: L (Department Institute of Mathematical Statistics (Life Member) Offices Held in Professional Societies Program Chair, ASA

Vardeman, Stephen B.

299

Sustainable Building Tax Credit (Personal)  

Broader source: Energy.gov [DOE]

SB 463, enacted in April 2007, established a personal tax credit and a corporate tax credit for sustainable buildings in New Mexico. The tax credits apply to both commercial and residential...

300

Device-transparent personal storage  

E-Print Network [OSTI]

Users increasingly store data collections such as digital photographs on multiple personal devices, each of which typically presents the user with a storage management interface isolated from the contents of all other ...

Strauss, Jacob A. (Jacob Alo), 1979-

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Affordable avatar control system for personal robots  

E-Print Network [OSTI]

Social robots (personal robots) emphasize individualized social interaction and communication with people. To maximize communication capacity of a personal robot, designers make it more anthropomorphic (or zoomorphic), and ...

Lee, Jun Ki, S. M. Massachusetts Institute of Technology

2009-01-01T23:59:59.000Z

302

Personal Property Policy | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of Energy Acquisition Regulations (DEAR) DOE Order 580.1A, Department of Energy Personal Property Management Program DOE Guide 580.1-1, Personal Property Management Guide...

303

Reducing the environmental impacts of intermodal transportation: a multi-criteria analysis based on ELECTRE and AHP methods  

E-Print Network [OSTI]

Reducing the environmental impacts of intermodal transportation: a multi-criteria analysis on a case of freight transport between Paris and Marseille. Keywords: Supply chain, Environmental impacts with lower environmental impacts, such as rail and waterways. The dilemma here is that all motorized modes

Boyer, Edmond

304

Not a Babe in the Woods: Using MotorMaster Software to Make Sophisticated Electric Motor Purchase Decisions  

E-Print Network [OSTI]

-Frmne, vertic;1l shaft and C-Face motors are also included in the database. The MotorMaster database can resolve m;my questions about the price commercially available motors. Here are some findings: * Although there is a general... horsepower. synchronous speed, enclosure type and vollIlge rating ;md whether you want a special feature, such as U-Frmne, vertical shaft, or C-Face motors. MotorMaster quickly supplies a list of commercially available models from seventeen manufacturers...

Litman, T.

305

Efficient, High-Torque Electric Vehicle Motor: Advanced Electric Vehicle Motors with Low or No Rare Earth Content  

SciTech Connect (OSTI)

REACT Project: QM Power will develop a new type of electric motor with the potential to efficiently power future generations of EVs without the use of rare-earth-based magnets. Many of todayís EV motors use rare earth magnets to efficiently provide torque to the wheels. QM Powerís motors would contain magnets that use no rare earth minerals, are light and compact, and can deliver more power with greater efficiency and at reduced cost. Key innovations in this project include a new motor design with iron-based magnetic materials, a new motor control technique, and advanced manufacturing techniques that substantially reduce the cost of the motor. The ultimate goal of this project is to create a cost-effective EV motor that offers the rough peak equivalent of 270 horsepower.

None

2012-01-01T23:59:59.000Z

306

Greening Transportation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFun with Big Sky LearningGetGraphene's 3D CounterpartDepartmentTransportation

307

Transportation Infrastructure  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomen Owned SmallOf The 2012 Greenbuy3 Archive Transportation Fact of the Week

308

Counterrotating brushless dc permanent magnet motor  

SciTech Connect (OSTI)

An brushless DC permanent magnet motor is provided for driving an autonomous underwater vehicle. In one embodiment, the motor comprises four substantially flat stators disposed in stacked relationship, with pairs of the stators being axially spaced and each of the stators comprising a tape-wound stator coil; and a first and second substantially flat rotors disposed between the spaced pairs of stators. Each of the rotors includes an annular array of permanent magnets embedded therein. A first shaft is connected to the first rotor and a second, concentric shaft is connected to the second rotor, and drive unit causes rotation of the two shafts in opposite directions. The second shaft comprises a hollow tube having a central bore therein in which the first shaft is disposed. Two different sets of bearings support the first and second shAfts. In another embodiment, the motor comprises two ironless stators and pairs and rotors mounted no opposite sides of the stators and driven by counterrotating shafts.

Hawsey, R.A.; Bailey, J.M.

1990-12-31T23:59:59.000Z

309

Counterrotating brushless dc permanent magnet motor  

SciTech Connect (OSTI)

An brushless DC permanent magnet motor is provided for driving an autonomous underwater vehicle. In one embodiment, the motor comprises four substantially flat stators disposed in stacked relationship, with pairs of the stators being axially spaced and each of the stators comprising a tape-wound stator coil; and a first and second substantially flat rotors disposed between the spaced pairs of stators. Each of the rotors includes an annular array of permanent magnets embedded therein. A first shaft is connected to the first rotor and a second, concentric shaft is connected to the second rotor, and drive unit causes rotation of the two shafts in opposite directions. The second shaft comprises a hollow tube having a central bore therein in which the first shaft is disposed. Two different sets of bearings support the first and second shAfts. In another embodiment, the motor comprises two ironless stators and pairs and rotors mounted no opposite sides of the stators and driven by counterrotating shafts.

Hawsey, R.A.; Bailey, J.M.

1990-01-01T23:59:59.000Z

310

Modular PM Motor Drives for Automotive Traction Applications  

SciTech Connect (OSTI)

This paper presents modular permanent magnet (PM) motor drives for automotive traction applications. A partially modularized drive system consisting of a single PM motor and multiple inverters is described. The motor has multiple three-phase stator winding sets and each winding set is driven with a separate three-phase inverter module. A truly modularized inverter and motor configuration based on an axial-gap PM motor is then introduced, in which identical PM motor modules are mounted on a common shaft and each motor module is powered by a separate inverter module. The advantages of the modular approach for both inverter and motor include: (1) power rating scalability--one design meets different power requirements by simply stacking an adequate number of modules, thus avoiding redesigning and reducing the development cost, (2) increased fault tolerance, and (3) easy repairing. A prototype was constructed by using two inverters and an axial-gap PM motor with two sets of three-phase stat or windings, and it is used to assist the diesel engine in a hybrid electric vehicle converted from a Chevrolet Suburban. The effect of different pulse-width-modulation strategies for both motoring and regenerative modes on current control is analyzed. Torque and regenerative control algorithms are implemented with a digital signal processor. Analytical and initial testing results are included in the paper.

Su, G.J.

2001-10-29T23:59:59.000Z

311

Variable current speed controller for eddy current motors  

DOE Patents [OSTI]

A speed control system for eddy current motors is provided in which the current to the motor from a constant frequency power source is varied by comparing the actual motor speed signal with a setpoint speed signal to control the motor speed according to the selected setpoint speed. A three-phase variable voltage autotransformer is provided for controlling the voltage from a three-phase power supply. A corresponding plurality of current control resistors is provided in series with each phase of the autotransformer output connected to inputs of a three-phase motor. Each resistor is connected in parallel with a set of normally closed contacts of plurality of relays which are operated by control logic. A logic circuit compares the selected speed with the actual motor speed obtained from a digital tachometer monitoring the motor spindle speed and operated the relays to add or substract resistance equally in each phase of the motor input to vary the motor current to control the motor at the selected speed.

Gerth, H.L.; Bailey, J.M.; Casstevens, J.M.; Dixon, J.H.; Griffith, B.O.; Igou, R.E.

1982-03-12T23:59:59.000Z

312

Tug-of-war of molecular motors: the effects of uneven load sharing  

E-Print Network [OSTI]

We analyze theoretically the problem of cargo transport along microtubules by motors of two species with opposite polarities. We consider two different one-dimensional models previously developed in the literature. On the one hand, a quite widespread model which assumes equal force sharing, here referred to as mean field model (MFM). On the other hand, a stochastic model (SM) which considers individual motor-cargo links. We find that in generic situations the MFM predicts larger cargo mean velocity, smaller mean run time and less frequent reversions than the SM. These phenomena are found to be consequences of the load sharing assumptions and can be interpreted in terms the probabilities of the different motility states. We also explore the influence of the viscosity in both models and the role of the stiffness of the motor-cargo links within the SM. Our results show that the mean cargo velocity is independent of the stiffness while the mean run time decreases with such a parameter. We explore the case of symm...

Bouzat, Sebastian; 10.1088/1478-3975/8/6/066010

2011-01-01T23:59:59.000Z

313

Personal Reflections on War and Sustainability  

E-Print Network [OSTI]

personal stories -- from "showering" with bottled water to teaching villagers to cook with solar ovens

Zhang, Junshan

314

Method and apparatus for generating motor current spectra to enhance motor system fault detection  

DOE Patents [OSTI]

A method and circuitry for sampling periodic amplitude modulations in a nonstationary periodic carrier wave to determine frequencies in the amplitude modulations. The method and circuit are described in terms of an improved motor current signature analysis. The method insures that the sampled data set contains an exact whole number of carrier wave cycles by defining the rate at which samples of motor current data are collected. The circuitry insures that a sampled data set containing stationary carrier waves is recreated from the analog motor current signal containing nonstationary carrier waves by conditioning the actual sampling rate to adjust with the frequency variations in the carrier wave. After the sampled data is transformed to the frequency domain via the Discrete Fourier Transform, the frequency distribution in the discrete spectra of those components due to the carrier wave and its harmonics will be minimized so that signals of interest are more easily analyzed.

Linehan, Daniel J. (Knoxville, TN); Bunch, Stanley L. (Oak Ridge, TN); Lyster, Carl T. (Knoxville, TN)

1995-01-01T23:59:59.000Z

315

Method and apparatus for generating motor current spectra to enhance motor system fault detection  

DOE Patents [OSTI]

A method and circuitry are disclosed for sampling periodic amplitude modulations in a nonstationary periodic carrier wave to determine frequencies in the amplitude modulations. The method and circuit are described in terms of an improved motor current signature analysis. The method insures that the sampled data set contains an exact whole number of carrier wave cycles by defining the rate at which samples of motor current data are collected. The circuitry insures that a sampled data set containing stationary carrier waves is recreated from the analog motor current signal containing nonstationary carrier waves by conditioning the actual sampling rate to adjust with the frequency variations in the carrier wave. After the sampled data is transformed to the frequency domain via the Discrete Fourier Transform, the frequency distribution in the discrete spectra of those components due to the carrier wave and its harmonics will be minimized so that signals of interest are more easily analyzed. 29 figs.

Linehan, D.J.; Bunch, S.L.; Lyster, C.T.

1995-10-24T23:59:59.000Z

316

Motor torque compensation of an induction electric motor by adjusting a slip command during periods of supposed change in motor temperature  

SciTech Connect (OSTI)

The present invention maintains constant torque in an inverter driven AC induction motor during variations in rotor temperature. It is known that the torque output of a given AC induction motor is dependent upon rotor temperature. At rotor temperatures higher than the nominal operating condition the rotor impedance increases, reducing the rotor current and motor torque. In a similar fashion, the rotor impedance is reduced resulting in increased rotor current and motor torque when the rotor temperature is lower than the nominal operating condition. The present invention monitors the bus current from the DC supply to the inverter and adjusts the slip frequency of the inverter drive to maintain a constant motor torque. This adjustment is based upon whether predetermined conditions implying increased rotor temperature or decreased rotor temperature exist for longer that a predetermined interval of time.

Kelledes, William L. (Brighton, MI); St. John, Don K. (Livonia, MI)

1992-01-01T23:59:59.000Z

317

E-Print Network 3.0 - achieve transportation goals Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

-6400 Millcreek Drive Mississauga, ON L5N 3E7 Summary: proactively in achieving the sustainable transportation of persons and goods in Canada. We do this through... , and...

318

What is Personal Training? Personal Training offers a one-on-one  

E-Print Network [OSTI]

PERSONAL TRAINING What is Personal Training? Personal Training offers a one-on-one private workout program, your Personal Trainer will help you reach your goals. Learn the different weight training will begin your Personal Training program with a fitness assessment, which will give the trainer

McConnell, Terry

319

Enhanced catalyst for conversion of syngas to liquid motor fuels  

DOE Patents [OSTI]

Synthesis gas comprising carbon monoxide and hydrogen is converted to C.sub.5.sup.+ hydrocarbons suitable for use as liquid motor fuels by contact with a dual catalyst system capable of enhancing the selectivity of said conversion to motor fuel range hydrocarbons and the quality of the resulting motor fuel product. The catalyst composition employs a Fischer-Tropsch catalyst, together with a co-catalyst/support component comprising SAPO silicoaluminophosphate, non-zeolitic molecular sieve catalyst.

Coughlin, Peter K. (Yorktown Heights, NY); Rabo, Jule A. (Armonk, NY)

1985-01-01T23:59:59.000Z

320

Enhanced conversion of syngas to liquid motor fuels  

DOE Patents [OSTI]

Synthesis gas comprising carbon monoxide and hydrogen is converted to C.sub.5.sup.+ hydrocarbons suitable for use as liquid motor fuels by contact with a dual catalyst system capable of enhancing the selectivity of said conversion to motor fuel range hydrocarbons and the quality of the resulting motor fuel product. The catalyst composition employs a Fischer-Tropsch catalyst, together with a co-catalyst/support component comprising SAPO silicoaluminophosphate, non-zeolitic molecular sieve catalyst.

Coughlin, Peter K. (Yorktown Heights, NY); Rabo, Jule A. (Armonk, NY)

1986-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Renewal processes and fluctuation analysis of molecular motor stepping  

E-Print Network [OSTI]

We model the dynamics of a processive or rotary molecular motor using a renewal processes, in line with the work initiated by Svoboda, Mitra and Block. We apply a functional technique to compute different types of multiple-time correlation functions of the renewal process, which have applications to bead-assay experiments performed both with processive molecular motors, such as myosin V and kinesin, and rotary motors, such as F1-ATPase.

Jaime E. Santos; Thomas Franosch; Andrea Parmeggiani; Erwin Frey

2005-11-13T23:59:59.000Z

322

Adjustable Speed AC Motor Drives-Applications Problems  

E-Print Network [OSTI]

Adjustable Speed AC Motor Drives Applications Problems by Dr. P. Enjeti Power Quality Laboratory Department ofElectrical Engineering Texas A&M University College Station, TX 77843 Tel: 409-845-7466 Fax: 409-845-6259 Email..., it generates side effects, some which have been recognized only recently. This paper presents a comprehensive coverage of application issues of PWM inverter controlled ac motor drives which include damage to motor insulation due to reflected voltages caused...

Enjeti, P.

323

A motor drive control system for the Lidar Polarimeter  

E-Print Network [OSTI]

A MOTOR DRIVE CONTROL SYSTEM FOR THE LIDAR POLARIMETER A Thesis by Waiming Leung Submitted to the Graduate College of Texas A/M University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCF, May 1977 Major... Subject: Electrical Engineering A MOTOR DRIVE CONTROL SYSTEM FOR THE LIDAR POLARIMETER A Thesis by Waiming Leung Approved as to style and content by: Chairman o Comm' ee ea o epartment Member Mem er May 1977 ABSTRACT A Motor Drive Control...

Leung, Waiming

1977-01-01T23:59:59.000Z

324

High Temperature, Buried Permanent Magnet, Brushless DC Motor  

E-Print Network [OSTI]

Circuit Model Predictions of the motor performance are accomplished with a closed loop electric circuit incorporating the motor. The circuit is broken down into three sub-circuits which are the equivalent generator as motor rotating, the coil pair...,Kang, Jungu Lee, Zhiyang Wang and others who worked with me in Vibration Control and Electrormechanics Laboratory. I also would like to thank Dr. Jinfang Liu and Dr. Heeju Choi at Electron Energy Corporation who constantly support our work. Finally, thanks...

Zhang, Zhengxin

2010-10-12T23:59:59.000Z

325

Enhanced catalyst for conversion of syngas to liquid motor fuels  

DOE Patents [OSTI]

Synthesis gas comprising carbon monoxide and hydrogen is converted to C[sub 5][sup +] hydrocarbons suitable for use as liquid motor fuels by contact with a dual catalyst system capable of enhancing the selectivity of said conversion to motor fuel range hydrocarbons and the quality of the resulting motor fuel product. The catalyst composition employs a Fischer-Tropsch catalyst, together with a co-catalyst/support component comprising a SAPO silicoaluminophosphate, non-zeolitic molecular sieve catalyst.

Coughlin, P.K.; Rabo, J.A.

1985-12-03T23:59:59.000Z

326

Transporting particulate material  

DOE Patents [OSTI]

A material transporting system comprises a material transporting apparatus (100) including a material transporting apparatus hopper structure (200, 202), which comprises at least one rotary transporting apparatus; a stationary hub structure (900) constraining and assisting the at least one rotary transporting apparatus; an outlet duct configuration (700) configured to permit material to exit therefrom and comprising at least one diverging portion (702, 702'); an outlet abutment configuration (800) configured to direct material to the outlet duct configuration; an outlet valve assembly from the material transporting system venting the material transporting system; and a moving wall configuration in the material transporting apparatus capable of assisting the material transporting apparatus in transporting material in the material transporting system. Material can be moved from the material transporting apparatus hopper structure to the outlet duct configuration through the at least one rotary transporting apparatus, the outlet abutment configuration, and the outlet valve assembly.

Aldred, Derek Leslie (North Hollywood, CA); Rader, Jeffrey A. (North Hollywood, CA); Saunders, Timothy W. (North Hollywood, CA)

2011-08-30T23:59:59.000Z

327

Motor Packaging with Consideration of Electromagnetic and Material...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

& Publications Alnico and Ferrite Hybrid Excitation Electric Machines Motor Packaging with Consideration of Electromagnetic and Material Characteristics Electric Machine R&D...

328

Integration of Novel Flux Coupling Motor and Current Source Inverter...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

of Novel Flux Coupling Motor and Current Source Inverter Novel Flux Coupling Machine without Permanent Magnets John Hsu, Oak Ridge National Laboratory, Flux Coupling...

329

Carbonyl Emissions from Gasoline and Diesel Motor Vehicles  

E-Print Network [OSTI]

emissions from gasoline and diesel motor vehicles. Environ.of four dilutions of diesel engine exhaust for a subchronicautomobiles and heavy-duty diesel trucks. Environ. Sci.

Jakober, Chris A.

2008-01-01T23:59:59.000Z

330

A New Class of Switched Reluctance Motors without Permanent Magnets...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

A New Class of Switched Reluctance Motors without Permanent Magnets A Segmented Drive Inverter Topology with a Small DC Bus Capacitor A Segmented Drive Inverter Topology with a...

331

Integration of Novel Flux Coupling Motor and Current Source Inverter...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Current Source Inverters for HEVs and FCVs Vehicle Technologies Office Merit Review 2014: Wireless Charging Integration of Novel Flux Coupling Motor and Current Source Inverter...

332

United States Industrial Motor Systems Market Opportunities Assessment...  

Broader source: Energy.gov (indexed) [DOE]

Executive Summary (December 1998) More Documents & Publications United States Industrial Electric Motor Systems Market Opportunities Assessment Pulp and Paper Mills: Profiting...

333

Neuromuscular modularity and behavioral correlates of motor control  

E-Print Network [OSTI]

I studied organizational principles that may subserve the control and learning of forelimb movements. Among these principles, I focused on muscular coordination patterns, motor cortical excitability, and sensorimotor ...

Overduin, Simon Alexander

2006-01-01T23:59:59.000Z

334

ac motor control: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: ??Permanent magnet Brushless DC motor drives are being employed in newlinemany variable speed applications due to their high efficiency, silent operation, newlinecompact...

335

ac motor drives: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- TxSpace Summary: and Quantitative Account Gear-Train Servo Error Types. IV. DC VARIABLE SPEED MOTOR DRIVE DESIGN CONSIDERATIONS AND RFALIZATION. Introduction. 27 29 30...

336

ac motor controller: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: ??Permanent magnet Brushless DC motor drives are being employed in newlinemany variable speed applications due to their high efficiency, silent operation, newlinecompact...

337

ac motor drive: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- TxSpace Summary: and Quantitative Account Gear-Train Servo Error Types. IV. DC VARIABLE SPEED MOTOR DRIVE DESIGN CONSIDERATIONS AND RFALIZATION. Introduction. 27 29 30...

338

Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

250 Energy Information AdministrationPetroleum Marketing Annual 1999 Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales Type, PAD District, and State (Thousand Gallons...

339

Table 32. Conventional Motor Gasoline Prices by Grade, Sales...  

Gasoline and Diesel Fuel Update (EIA)

Information AdministrationPetroleum Marketing Annual 1998 Table 32. Conventional Motor Gasoline Prices by Grade, Sales Type, PAD District, and State (Cents per Gallon...

340

Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales...  

Gasoline and Diesel Fuel Update (EIA)

- - - - W W - - - - - - See footnotes at end of table. 44. Refiner Motor Gasoline Volumes by Formulation, Sales Type, PAD District, and State 292 Energy...

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

220 Energy Information AdministrationPetroleum Marketing Annual 1998 Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type, PAD District, and State (Thousand Gallons per...

342

Table 34. Reformulated Motor Gasoline Prices by Grade, Sales...  

Gasoline and Diesel Fuel Update (EIA)

Information AdministrationPetroleum Marketing Annual 1998 Table 34. Reformulated Motor Gasoline Prices by Grade, Sales Type, PAD District, and Selected States (Cents per...

343

Table 48. Prime Supplier Sales Volumes of Motor Gasoline by...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Petroleum Marketing Annual 1995 Table 48. Prime Supplier Sales Volumes of Motor Gasoline by Grade, Formulation, PAD District, and State (Thousand Gallons per Day) -...

344

Table 34. Reformulated Motor Gasoline Prices by Grade, Sales...  

Gasoline and Diesel Fuel Update (EIA)

Information Administration Petroleum Marketing Annual 1995 Table 34. Reformulated Motor Gasoline Prices by Grade, Sales Type, PAD District, and State (Cents per Gallon...

345

Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type...  

Gasoline and Diesel Fuel Update (EIA)

220 Energy Information AdministrationPetroleum Marketing Annual 1999 Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type, PAD District, and State (Thousand Gallons per...

346

Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Energy Information Administration Petroleum Marketing Annual 1995 Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type, PAD District, and State (Cents per Gallon...

347

Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type...  

Gasoline and Diesel Fuel Update (EIA)

134 Energy Information AdministrationPetroleum Marketing Annual 1998 Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type, PAD District, and State (Cents per Gallon...

348

Table 48. Prime Supplier Sales Volumes of Motor Gasoline by...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Petroleum Marketing Annual 1998 Table 48. Prime Supplier Sales Volumes of Motor Gasoline by Grade, Formulation, PAD District, and State (Thousand Gallons per Day) -...

349

Table 32. Conventional Motor Gasoline Prices by Grade, Sales...  

Gasoline and Diesel Fuel Update (EIA)

- - - - W W - - - - - - See footnotes at end of table. 32. Conventional Motor Gasoline Prices by Grade, Sales Type, PAD District, and State 86 Energy Information...

350

Table 32. Conventional Motor Gasoline Prices by Grade, Sales...  

U.S. Energy Information Administration (EIA) Indexed Site

Information Administration Petroleum Marketing Annual 1995 Table 32. Conventional Motor Gasoline Prices by Grade, Sales Type, PAD District, and State (Cents per Gallon...

351

Table 48. Prime Supplier Sales Volumes of Motor Gasoline by...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Petroleum Marketing Annual 1999 Table 48. Prime Supplier Sales Volumes of Motor Gasoline by Grade, Formulation, PAD District, and State (Thousand Gallons per Day) -...

352

Table 32. Conventional Motor Gasoline Prices by Grade, Sales...  

U.S. Energy Information Administration (EIA) Indexed Site

- - - - 64.7 64.7 - - - - - - See footnotes at end of table. 32. Conventional Motor Gasoline Prices by Grade, Sales Type, PAD District, and State 86 Energy Information...

353

Table 33. Oxygenated Motor Gasoline Prices by Grade, Sales Type...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

- - - - - - - - - - - - See footnotes at end of table. 33. Oxygenated Motor Gasoline Prices by Grade, Sales Type, PAD District, and State 116 Energy Information...

354

Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Energy Information Administration Petroleum Marketing Annual 1995 Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type, PAD District, and State (Thousand Gallons per...

355

Table 33. Oxygenated Motor Gasoline Prices by Grade, Sales Type...  

Gasoline and Diesel Fuel Update (EIA)

Information Administration Petroleum Marketing Annual 1995 Table 33. Oxygenated Motor Gasoline Prices by Grade, Sales Type, PAD District, and State (Cents per Gallon...

356

Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales...  

U.S. Energy Information Administration (EIA) Indexed Site

250 Energy Information AdministrationPetroleum Marketing Annual 1998 Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales Type, PAD District, and State (Thousand Gallons...

357

Table 34. Reformulated Motor Gasoline Prices by Grade, Sales...  

Gasoline and Diesel Fuel Update (EIA)

Information AdministrationPetroleum Marketing Annual 1999 Table 34. Reformulated Motor Gasoline Prices by Grade, Sales Type, PAD District, and Selected States (Cents per...

358

Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales...  

Gasoline and Diesel Fuel Update (EIA)

Energy Information Administration Petroleum Marketing Annual 1995 Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales Type, PAD District, and State (Thousand Gallons...

359

Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

134 Energy Information AdministrationPetroleum Marketing Annual 1999 Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type, PAD District, and State (Cents per Gallon...

360

Petroleum Products Table 31. Motor Gasoline Prices by Grade...  

Gasoline and Diesel Fuel Update (EIA)

by Grade, Sales Type, PAD District, and State 56 Energy Information Administration Petroleum Marketing Annual 1996 Table 31. Motor Gasoline Prices by Grade, Sales Type, PAD...

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Petroleum Products Table 43. Refiner Motor Gasoline Volumes...  

Gasoline and Diesel Fuel Update (EIA)

by Grade, Sales Type, PAD District, and State 262 Energy Information Administration Petroleum Marketing Annual 1996 Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type,...

362

Petroleum Products Table 43. Refiner Motor Gasoline Volumes...  

Gasoline and Diesel Fuel Update (EIA)

by Grade, Sales Type, PAD District, and State 262 Energy Information Administration Petroleum Marketing Annual 1997 Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type,...

363

A New Class of Switched Reluctance Motors without Permanent Magnets  

Broader source: Energy.gov (indexed) [DOE]

switched reluctance motor benefits: - Low material and fabrication cost - No permanent magnet material * Back-emf and demagnetization is not an issue * Permits operation...

364

BPM Motors in Residential Gas Furnaces: What are the Savings?  

E-Print Network [OSTI]

standby power consumption in BPM furnaces is significantlytotal electricity consumption by BPM furnaces. This is notOverall, it appears the BPM motors used in furnaces offer

Lutz, James; Franco, Victor; Lekov, Alex; Wong-Parodi, Gabrielle

2006-01-01T23:59:59.000Z

365

Aging assessment of large electric motors in nuclear power plants  

SciTech Connect (OSTI)

Large electric motors serve as the prime movers to drive high capacity pumps, fans, compressors, and generators in a variety of nuclear plant systems. This study examined the stressors that cause degradation and aging in large electric motors operating in various plant locations and environments. The operating history of these machines in nuclear plant service was studied by review and analysis of failure reports in the NPRDS and LER databases. This was supplemented by a review of motor designs, and their nuclear and balance of plant applications, in order to characterize the failure mechanisms that cause degradation, aging, and failure in large electric motors. A generic failure modes and effects analysis for large squirrel cage induction motors was performed to identify the degradation and aging mechanisms affecting various components of these large motors, the failure modes that result, and their effects upon the function of the motor. The effects of large motor failures upon the systems in which they are operating, and on the plant as a whole, were analyzed from failure reports in the databases. The effectiveness of the industry`s large motor maintenance programs was assessed based upon the failure reports in the databases and reviews of plant maintenance procedures and programs.

Villaran, M.; Subudhi, M. [Brookhaven National Lab., Upton, NY (United States)

1996-03-01T23:59:59.000Z

366

Building Green in Greensburg: Dwane Shank Motors GM Dealership  

Office of Energy Efficiency and Renewable Energy (EERE)

This poster highlights energy efficiency, renewable energy, and sustainable features of the high-performing Shank Motors GM Dealership building in Greensburg, Kansas.

367

Motor gasolines, winter 1981-1982  

SciTech Connect (OSTI)

Analytical data for 905 samples of motor gasoline, were collected from service stations throughout the country and were analyzed in the laboratories of various refiners, motor manufacturers, and chemical companies. The data were submitted to the Bartlesville Energy Technology Center for study, necessary calculations, and compilation under a cooperative agreement between the Bartlesville Energy Technology Center (BETC) and the American Petroleum Institute (API). The samples represent the products of 30 companies, large and small, which manufacture and supply gasoline. These data are tabulated by groups according to brands (unlabeled) and grades for 17 marketing districts into which the country is divided. A map included in this report, shows marketing areas, districts and sampling locations. The report also includes charts indicating the trends of selected properties of motor fuels since winter 1959-1960 survey for the leaded gasolines, and since winter 1979-1980 survey for the unleaded gasolines. Sixteen octane distribution percent charts for areas 1, 2, 3, and 4 for unleaded antiknock index (R+M)/2 below 90.0, unleaded antiknock index (R+M)/2 90.0 and above, leaded antiknock index (R+M)/2 below 93.0, and leaded antiknock index (R+M)/2 93.0 and above grades of gasoline are presented in this report. The antiknock (octane) index (R+M)/2 averages of gasoline sold in this country were 87.4 for unleaded below 90.0, 91.7 for unleaded 90.0 and above, and 88.9 for leaded below 93.0. Only one sample was reported as 93.0 for leaded gasolines with an antiknock index (R+M)/2 93.0 and above.

Shelton, E M

1982-07-01T23:59:59.000Z

368

Advanced motor driven clamped borehole seismic receiver  

DOE Patents [OSTI]

A borehole seismic tool including a borehole clamp which only moves perpendicular to the borehole. The clamp is driven by an electric motor, via a right angle drive. When used as a seismic receiver, the tool has a three part housing, two of which are hermetically sealed. Accelerometers or geophones are mounted in one hermetically sealed part, the electric meter in the other hermetically sealed part, and the clamp and right angle drive in the third part. Preferably the tool includes cable connectors at both ends. Optionally a shear plate can be added to the clamp to extend the range of the tool.

Engler, Bruce P. (Sandoval County, NM); Sleefe, Gerard E. (Bernalillo County, NM); Striker, Richard P. (Bernalillo County, NM)

1993-01-01T23:59:59.000Z

369

Synchronous operation of the BLDC motor  

E-Print Network [OSTI]

Back EMF 19 22 B. 3. Freewheeling Diode Conduction. . B. 4. Back EMF Integration. 27 30 C. Flux Linkage Based Method. . 33 CHAPTER Page III SENSORLESS START-UP METHODS. . 39 A. Synchronous Start-up. B. Eddy Current. . C. Diagnostic Current... Demagnetization characteristic of a magnet. 7 Flux linkage and induced voltage of phase a, 14 8 Converter configuration of BLDC motor. 19 9 Terminal voltage of phase a. . . . 19 10 Low pass filters and comparator circuit. 11 Wave forms showing how switching...

Guzelgunler, Yilcan

1998-01-01T23:59:59.000Z

370

Electric machine for hybrid motor vehicle  

DOE Patents [OSTI]

A power system for a motor vehicle having an internal combustion engine and an electric machine is disclosed. The electric machine has a stator, a permanent magnet rotor, an uncluttered rotor spaced from the permanent magnet rotor, and at least one secondary core assembly. The power system also has a gearing arrangement for coupling the internal combustion engine to wheels on the vehicle thereby providing a means for the electric machine to both power assist and brake in relation to the output of the internal combustion engine.

Hsu, John Sheungchun (Oak Ridge, TN)

2007-09-18T23:59:59.000Z

371

Magnet Motor Corp | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429Lacey,(MonasterLowell Point,ECO Auger11.Spain: EnergyMagnet Motor Corp Jump to:

372

Estimating Motor Efficiency in the Field  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeat PumpRecord ofESPCof EnergyHouse EnvironmentalEstimating Motor Efficiency in

373

Renault Samsung Motors | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to: navigation, searchVirginia Blue Ridge And PiedmontReminderville, Ohio:RenGenMotors Jump

374

Training: Motor Systems | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from theDepartment of EnergyThe Sun andDepartment ofFan Systems Training:Motor

375

Motor Thermal Control | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d F S i DOE TribaltheMyMinutesDepartmentCharacteristics | MotorThermal

376

Trexa Motor Corporation TMC | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov Pty LtdSteen,LtdInformation DixieTraverse Electric Coop,Trenton, NJ)Trexa Motor

377

Motor Repair Tech Brief | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergy HealthCommentsAugust 2012 Monthly ProjectEnterprisesRepair Tech Brief Motor

378

MotorMaster+ | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergy HealthCommentsAugust 2012 Monthly ProjectEnterprisesRepair Tech MotorMaster+

379

Mobile Mapping and Personal Driving  

E-Print Network [OSTI]

-Computer Interaction Lab University of Maryland #12;Route Choice Matters Average driver spends a full week each year Custom annotation Enrich the data with personal notes Community and collaboration Fill in gaps tasks? Find the best route Find the best time to leave See which way other people go Add my own notes

Golbeck, Jennifer

380

Government Personal Property Asset Management  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish procedures for managing Government personal owned or leased by the Department of Energy (DOE) and in the custody of DOE Headquarters employees, including those in the National Nuclear Security Administration (NNSA), in accordance with Federal and Departmental regulations. Cancels HQ O 580.1.

2001-09-23T23:59:59.000Z

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Headquarters Personal Property Asset Management  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish procedures for managing Government personal property owned or leased by the Department of Energy and in the custody of DOE Headquarters employees, including those in the National Nuclear Security Administration. Cancels DOE HQ O 580.1B. Canceled by DOE N 251.69.

2005-09-26T23:59:59.000Z

382

Optimization of induction motor efficiency: Volume 2, Single-phase induction motors: Final report  

SciTech Connect (OSTI)

The optimal design of the motor dimensions, the capacitance of the run capacitor, the winding distribution and the choice of the electrical steel are the most important sources for an improvement of the efficiency of modern single-phase induction motors for given performance and material cost constraints. The formulation of the techniques which realize this optimization is based on nonlinear programming approaches. The Method of Boundary Search Along Active Constraints is used for the optimal design of the motor dimensions of a commercially available 2 hp, 115 V single-phase induction motor. Based on the optimization results due to the above mentioned four optimization components, the relationships between efficiency, power factor, cost, active materials and the values of the capacitance of the run capacitor are studied and the limited validity of the model law is discussed. This report also explains why the Wanlass retrofit improves efficiency and details the advantages and disadvantages of such a retrofitting as compared with the operation in the standard configuration.

Fuchs, E.F.; Huang, H.; Vandenput, A.J.; Holl, J.; Appelbaum, J.; Zak, Z.; Erlicki, M.S.

1987-05-01T23:59:59.000Z

383

Transportation Security | ornl.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Transportation Security SHARE Global Threat Reduction Initiative Transportation Security Cooperation Secure Transport Operations (STOP) Box Security of radioactive material while...

384

Strategic Freight Transportation Contract Procurement  

E-Print Network [OSTI]

Based Procurement for Transportation Services, Journal ofCoia, A. , Evolving transportation exchanges, World trade,an Auction Based Transportation Marketplace, Transportation

Nandiraju, Srinivas

2006-01-01T23:59:59.000Z

385

"Educating transportation professionals."  

E-Print Network [OSTI]

"Educating transportation professionals." Michael Demetsky Henry L. Kinnier Professor mjd of Virginia Charlottesville, VA 434.924.7464 Transportation Engineering & Management Research Our group works closely with the Virginia Center for Transportation Innovation and Research (VCTIR), located

Acton, Scott

386

Transportation and its Infrastructure  

E-Print Network [OSTI]

system for international aviation, Study carried out for ICAO, London, UK IEA Hybrid, 2006: International Energysystems, store regenerative braking energy and to operate the powerful motor drives needed for hybrid

2007-01-01T23:59:59.000Z

387

Transportation Beyond 2000: Technologies Needed for Engineering Design  

SciTech Connect (OSTI)

The purpose of the workshop was to acquaint the staff of the NASA Langley Research Center with the broad spectrum of transportation challenges and concepts foreseen within the next 20 years. The hope is that material presented at the workshop and contained in this document will stimulate innovative high-payoff research directed towards the efficiency of future transportation systems. The workshop included five sessions designed to stress the factors that will lead to a revolution in the way one will travel in the 21st century. The first session provides the historical background and a general perspective for future transportation, including emerging transportation alternatives such as working at a distance. Personal travel is the subject of Session Two. The third session looks at mass transportation, including advanced rail vehicles, advanced commuter aircraft, and advanced transport aircraft. Separate abstracts have been submitted to the database for articles from this workshop.

Huebner, L.D.; Asbury, S.C.; Lamar, J.E.; Mckinley, R.E. Jr.; Scott, R.C.; Small, W.J.; Torres, A.O.

1996-02-01T23:59:59.000Z

388

Transportation Efficiency Resources  

Broader source: Energy.gov [DOE]

Transportation efficiency reduces travel demand as measured by vehicle miles traveled (VMT). While transportation efficiency policies are often implemented under local governments, national and...

389

Chapter 12 Transportation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2-1 November 2012 Words in bold and acronyms are defined in Chapter 32, Glossary and Acronyms. Chapter 12 Transportation This chapter describes existing transportation resources in...

390

Sustainability and Transport  

E-Print Network [OSTI]

2005. Integrating Sustainability into the Trans- portationTHOUGHT PIECE Sustainability and Transport by Richardof the concept of sustainability to transport planning. In

Gilbert, Richard

2006-01-01T23:59:59.000Z

391

Methods for Rapid Estimation of Motor Input Power in HVAC Assessments  

E-Print Network [OSTI]

In preliminary building energy assessments, it is often desired to estimate a motor's input power. Motor power estimates in this context should be rapid, safe, and noninvasive. Existing methods for motor input power estimation, such as direct...

Christman, Kevin D.

2011-08-08T23:59:59.000Z

392

Fault Detection and Diagnostics for Non-Intrusive Monitoring Using Motor Harmonics  

E-Print Network [OSTI]

Harmonic analysis of motor current has been used to track the speed of motors for sensorless control. Algorithms exist that track the speed of a motor given a dedicated stator current measurement, for example. Harmonic ...

Orji, Uzoma A.

393

Kieffer Paper Mill's Recycled Fiber Mill and PSI Energy's High Efficiency Motors Plan  

E-Print Network [OSTI]

efficiency would yield significant energy savings. PSI Energy was able to help Kieffer examine the economics of high efficiency motors, and through the PSI Energy High Efficiency Motors Plan encouraged Kieffer Paper Mills to purchase energy efficient motors...

Myers, J. A.

394

The United States Industrial Electric Motor Systems Market Opportunities Assessment: Key Results  

E-Print Network [OSTI]

portrait of the inventory of motor systems currently in use in US industrial facilities, estimate motor system energy use and potential for energy savings. The research and analysis to support these objectives consisted primarily of on-site motor system...

Rosenberg, M.

395

Translating Sleep Research: Does Sleep Promote Learning a Functional Motor Task?  

E-Print Network [OSTI]

Sleep has been demonstrated to produce off-line improvements in motor learning in young adults. Evidence of sleep-dependent off-line motor learning has been demonstrated across a wide variety of simple motor tasks that ...

Al-Sharman, Alham Jehad

2013-05-31T23:59:59.000Z

396

Direct Torque Control for Interior Permanent Magnet Synchronous Motors with Respect to Optimal Efficiency  

E-Print Network [OSTI]

motors (PMSM) increased significantly. Thus, this motor type becomes more and more attractive for drive-axis current of the motor must not be controlled to zero, as it is common with non-salient PMSM. Thus

Paderborn, Universität

397

The Transportation System Inside a Living Cell Department of Physics and Astronomy  

E-Print Network [OSTI]

, or 32 nanometer steps depending on the load it is hauling or on the amount of ATP (fuel. It has workers (proteins), a power plant (mitochondria), roads (actin fibers and microtubules), trucks is the fuel that is used to power molecular motors. The second way is through active transport that works like

Yu, Clare C.

398

Soft commutated direct current motor [summary of proposed paper  

SciTech Connect (OSTI)

A novel soft commutated direct current (DC) motor is introduced. The current of the commutated coil is intentionally drained before the brush disconnects the coil. This prevents the spark generation that normally occurs in conventional DC motors. A similar principle can be applied for DC generators.

Hsu, John S.

1998-10-22T23:59:59.000Z

399

Molecules, muscles, and machines: Universal performance characteristics of motors  

E-Print Network [OSTI]

Molecules, muscles, and machines: Universal performance characteristics of motors James H. Marden, piston engines, electric motors, and all types of jets. Dependence of force production and stress of materials and mechanisms. Organisms and machines move by exerting forces on their external environment

Marden, James

400

MOTOR SCHEMAS IN ROBOT LEARNING Lynne E. Parker  

E-Print Network [OSTI]

allows robot learning to scale to more complex robots or tasks, thus making practical applicationsMOTOR SCHEMAS IN ROBOT LEARNING Lynne E. Parker Department of Electrical Engineering and Computer in robot learning; Macro actions in robot learning; Basis behaviors for robot learning. Definition Motor

Parker, Lynne E.

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Adaptive robust motion control of linear motors for precision manufacturing  

E-Print Network [OSTI]

for widespread use in high-speed/high-accuracy positioning systems [1≠3]. In general, the linear motor hasAdaptive robust motion control of linear motors for precision manufacturing Bin Yao *, Li Xu School of Mechanical Engineering, Purdue University, West Lafayette, IN 47907, USA Received 6 October 1999; accepted 11

Yao, Bin

402

Quality electric motor repair: A guidebook for electric utilities  

SciTech Connect (OSTI)

This guidebook provides utilities with a resource for better understanding and developing their roles in relation to electric motor repair shops and the industrial and commercial utility customers that use them. The guidebook includes information and tools that utilities can use to raise the quality of electric motor repair practices in their service territories.

Schueler, V.; Douglass, J.

1995-08-01T23:59:59.000Z

403

Electromagnetic Coupling in a dc Motor and Tachometer Assembly  

E-Print Network [OSTI]

-pole permanent magnet stator devices. A shaft of finite stiffness connects the tachometer and motor armatures machines. The experimental test setup consists of an integrated permanent magnet dc motor-tachometer unit-tachometer shaft or a flexible mechanical coupling, this exercise in servo-control design becomes quite challenging

Awtar, Shorya

404

Comparative Study of Switched Reluctance Motors Performances for Two Current  

E-Print Network [OSTI]

of machines as high torque ripple, high acoustic noise and vibration limit their industrial applications [1Comparative Study of Switched Reluctance Motors Performances for Two Current Distributions a 3-phase, 6-slot, and 4-pole Mutually Coupled Switched Reluctance Motor (MCSRM 6/4) with new current

Paris-Sud XI, Université de

405

WVU Personal Rapid Transit Benefit Cost Analysis  

E-Print Network [OSTI]

WVU Personal Rapid Transit Benefit Cost Analysis Morgantown, West Virginia Prepared For: West ......................................................................... 12 Demographic Data Summary techniques suitable for assessing the impact of the WVU Personal Rapid Transit System (PRT) was employed

Mohaghegh, Shahab

406

Department of Energy Personal Property Management Program  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Order provides responsibilities and requirements for personal property management at the Department. Change 1, dated 5-8-08, includes responsibilities for heads of Departmental elements to be accountable for personal property inventories.

2005-12-07T23:59:59.000Z

407

Department of Energy Personal Property Management Program  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Order provides responsibilities and requirements for personal property management at the Department. Change 1, dated 5-8-08, includes responsibilities for heads of Departmental elements to be accountable for personal property inventories. Cancels DOE O 580.1.

2005-12-07T23:59:59.000Z

408

Assessing Effectiveness of Personality Style in Documentation  

E-Print Network [OSTI]

interfaces ≠ Training, help and documentation, theory and methods. General Terms Documentation ManagementAssessing Effectiveness of Personality Style in Documentation Kenneth Sayles. Department conducted a similar experiment, but looking beyond preference to see if the personality of documentation

Novick, David G.

409

Behavior-based personalization : strategies and Implications  

E-Print Network [OSTI]

The personalization of services and products offered to customers is becoming crucial for the success of companies. Firms that can maintain a personalized relationship with their customers will not only gain an advantage ...

Violante, Jo„o G

2011-01-01T23:59:59.000Z

410

SIGN HERE : informed consent in personalized medicine  

E-Print Network [OSTI]

The next era of medicine will be one of personalization, scientists and physicians promise. Personalized medicine is a refined clinical approach in which clinicians will utilize your genomic information to help you prevent ...

Ahmed, Abdul-Kareem H

2013-01-01T23:59:59.000Z

411

Department of Energy Personal Property Management Program  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The order sets forth requirements for personal property management and accountability. Admin Chg 1, dated 10-22-12.

2012-03-30T23:59:59.000Z

412

Agency and First-Person Authority  

E-Print Network [OSTI]

Thesis without undermining the epistemic distinctiveness of first-person access. I According to Shoemaker, ďa self-blind

Parrott, Matthew Thomas

2011-01-01T23:59:59.000Z

413

Internally Displaced Persons in Nepal  

E-Print Network [OSTI]

Peace and Democracy in South Asia, Volume 1, Issue 2, 2005. Bandana Shrestha has been volunteering with the Nepal Institute of Peace, Kathmandu, as Programme Coordinator. Her email ID is: shrestha_bandana@yahoo.com. Som Niroula is Programme... Officer of the Nepal Institute of Peace. Email: niroulasom@yahoo.com. Internally Displaced Persons in Nepal BANDANA SHRESTHA & SOM NIROULA Background Nepal has been in an internal armed conflict since 1996 between the Communist Party...

Shrestha, Bandana; Niroula, Som

2005-01-01T23:59:59.000Z

414

E-Print Network 3.0 - asimple motor task Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

York University (Toronto) Collection: Biology and Medicine 19 JN-00488-2005.R2 Running Head: SOMATOTOPY AND MOTOR IMAGERY Summary: imagery. Brain activity during a motor imagery...

415

Advanced Power Electronics and Electric Motors (APEEM) R&D Program...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Electric Motors (APEEM) R&D Program Overview Advnaced Power Electronics and Electric Machines (APEEM) R&D Program Overview Advanced Power Electronics and Electric Motors (APEEM)...

416

U.S. Department of Energy's Motor Challenge Program: A National...  

Broader source: Energy.gov (indexed) [DOE]

industry needs, and market drivers associated with improving industrial electric motor-driven systems. The key strategies and tactics being employed by the DOE Motor...

417

High-Temperature Motor Windings for Downhole Pumps Used in Geothermal...  

Broader source: Energy.gov (indexed) [DOE]

High-Temperature Motor Windings for Downhole Pumps Used in Geothermal Energy Production High-Temperature Motor Windings for Downhole Pumps Used in Geothermal Energy Production...

418

Impact of California Reformulated Gasoline on Motor Vehicle Emissions. 2. Volatile Organic Compound Speciation and Reactivity  

E-Print Network [OSTI]

California Reformulated Gasoline On Motor Vehicle EmissionsCalifornia Reformulated Gasoline on Motor Vehicle EmmissionsBerkeley Environ. ScLTechnoL gasoline Impact California of

Kirchstetter, Thomas; Singer, Brett; Harley, Robert

1999-01-01T23:59:59.000Z

419

E-Print Network 3.0 - augment motor training-induced Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Direct-Drive Motors Farhad Aghili, Member, IEEE, Martin Buehler, Member... - ation of permanent-magnet synchronous motors and their control based on Fourier coefficients. A new......

420

Pluggable Personal Data Servers Nicolas Anciaux*  

E-Print Network [OSTI]

Pluggable Personal Data Servers Nicolas Anciaux* , Luc Bouganim* , Yanli Guo* , Philippe Pucheral, France @gemalto.com ABSTRACT An increasing amount of personal data is automatically gathered, introduces a credible alternative to the systematic centralization of personal data. By embedding a full

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

PERSONAL DATA (IT0002) Mr. Miss Dr.  

E-Print Network [OSTI]

Update PERSONAL DATA (IT0002) Mr. Miss Dr. Gender Male Female State Complete Information No Address OF TENNESSEE PERSONAL DATA FORM Personnel # PERMANENT RESIDENCE (IT0006-Subtype 1) Form of Address: New Ms Code PDF Rev. 03/20/2008 Page 1 of 2 #12;ADDITIONAL PERSONAL DATA (IT0077) Yes Yes No Employee

Tennessee, University of

422

Personal Finance Make Your Money Matter  

E-Print Network [OSTI]

Personal Finance Make Your Money Matter Name: Registration number: Department: Year of study of your portfolio. #12;Personal Finance Make Your Money Matter2 Contents Timetable Page 3 Introduction 16 #12;Personal Finance Make Your Money Matter3 Timetable Friday 6.00 pm Introduction

Stevenson, Mark

423

Device Selection by a Personal Proxy Agent  

E-Print Network [OSTI]

Device Selection by a Personal Proxy Agent N. Hadibi, K. El-khatib, Eric Z. Zhang, Ken Chan, G. v user to access communication devices currently present in his Personal Area Network (PAN) Performs PreferencesDevice Capability An example Scenario: Connecting Alice and Bob w/o a Personal Proxy Internet Home

von Bochmann, Gregor

424

The Simplicity Device: Your Personal Mobile Representative  

E-Print Network [OSTI]

The Simplicity Device: Your Personal Mobile Representative Giovanni Bartolomeo1, Francesca Martire1 mobile phone that stores and handles personal information about the user. The Simplicity Device can be connected (e.g. via Bluetooth) to several other devices thus allowing personalization of services

425

Graduate Certificate in Transportation  

E-Print Network [OSTI]

Graduate Certificate in Transportation Nohad A. Toulan School of Urban Studies and Planning of Engineering and Computer Science integrated transportation systems. The Graduate Certificate in Transportation their capabilities. Students in the program can choose among a wide range of relevant courses in transportation

Bertini, Robert L.

426

TRANSPORTATION Annual Report  

E-Print Network [OSTI]

2003 CENTER FOR TRANSPORTATION STUDIES Annual Report #12;Center for Transportation Studies University of Minnesota 200 Transportation and Safety Building 511 Washington Avenue S.E. Minneapolis, MN publication is a report of transportation research, education, and outreach activities for the period July

Minnesota, University of

427

Regional Transportation Coordination Study  

E-Print Network [OSTI]

Regional Planning Commission Wanda Carter-Dyer Public Transportation Coordinator Texas Department of Transportation Councilperson Debra Martinez Briseno Cities in Calhoun County Laura G. Sanders Executive Director Golden Crescent Workforce... Regional Planning Commission Wanda Carter-Dyer Public Transportation Coordinator Texas Department of Transportation Councilperson Debra Martinez Briseno Cities in Calhoun County Laura G. Sanders Executive Director Golden Crescent Workforce...

Golden Crescent Regional Planning Commission

428

Conversion of olefins to liquid motor fuels  

DOE Patents [OSTI]

Linear and/or branched claim C.sub.2 to C.sub.12 olefins are converted to hydrocarbon mixtures suitable for use as liquid motor fuels by contact with a catalyst capable of ensuring the production of desirable products with only a relatively minor amount of heavy products boiling beyond the diesel oil range. The catalyst having desirable stability during continuous production operations, comprises a steam stabilized zeolite Y catalyst of hydrophobic character, desirably in aluminum-extracted form. The olefins such as propylene, may be diluted with inerts, such as paraffins or with water, the latter serving to moderate the acidity of the catalyst, or to further moderate the activity of the aluminum-extracted catalyst, so as to increase the effective life of the catalyst.

Rabo, Jule A. (Armonk, NY); Coughlin, Peter K. (Yorktown Heights, NY)

1988-01-01T23:59:59.000Z

429

Advanced Ultra-High Speed Motor for Drilling  

SciTech Connect (OSTI)

Three (3) designs have been made for two sizes, 6.91 cm (2.72 inch) and 4.29 cm (1.69 inch) outer diameters, of a patented inverted configured Permanent Magnet Synchronous Machines (PMSM) electric motor specifically for drilling at ultra-high rotational speeds (10,000 rpm) and that can utilize advanced drilling methods. Benefits of these motors are stackable power sections, full control (speed and direction) of downhole motors, flow hydraulics independent of motor operation, application of advanced drilling methods (water jetting and abrasive slurry jetting), and the ability of signal/power electric wires through motor(s). Key features of the final designed motors are: fixed non-rotating shaft with stator coils attached; rotating housing with permanent magnet (PM) rotor attached; bit attached to rotating housing; internal channel(s) in a nonrotating shaft; electric components that are hydrostatically isolated from high internal pressure circulating fluids ('muds') by static metal to metal seals; liquid filled motor with smoothed features for minimized turbulence in the motor during operation; and new inverted coated metal-metal hydrodynamic bearings and seals. PMSM, Induction and Switched Reluctance Machines (SRM), all pulse modulated, were considered, but PMSM were determined to provide the highest power density for the shortest motors. Both radial and axial electric PMSM driven motors were designed with axial designs deemed more rugged for ultra-high speed, drilling applications. The 6.91 cm (2.72 inch) OD axial inverted motor can generate 4.18KW (5.61 Hp) power at 10,000 rpm with a 4 Nm (2.95 ft-lbs) of torque for every 30.48 cm (12 inches) of power section. The 6.91 cm (2.72 inch) OD radial inverted motor can generate 5.03 KW (6.74 Hp) with 4.8 Nm (3.54 ft-lb) torque at 10,000 rpm for every 30.48 cm (12 inches) of power section. The 4.29 cm (1.69 inch) OD radial inverted motor can generate 2.56 KW (3.43 Hp) power with 2.44 Nm (1.8 ft-lb) torque at full speed 10,000 rpm for every 30.48 cm (12 inches) of power section. Operating conditions are 300 voltage AC at the motor leads. Power voltage losses in the cables/wirelines to the motor(s) are expected to be about 10% for 5000 feet carrying 2 amperes. Higher voltages and better insulators can lower these losses and carry more amperes. Cutting elements for such high tip velocities are currently not available, consequently these motors will not be built at this time. However, 7.62 cm (3 inch) OD, low speed, PMSM radial electric motors based on this project design are being built under a 2006 Oklahoma Center for the Advancement of Science and Technology 'proof of concept' grant.

Impact Technologies LLC; University of Texas at Arlington

2007-03-31T23:59:59.000Z

430

Sarcosine attenuates toluene-induced motor incoordination, memory impairment, and hypothermia but not brain stimulation reward enhancement in mice  

SciTech Connect (OSTI)

Toluene, a widely used and commonly abused organic solvent, produces various behavioral disturbances, including motor incoordination and cognitive impairment. Toluene alters the function of a large number of receptors and ion channels. Blockade of N-methyl-D-aspartate (NMDA) receptors has been suggested to play a critical role in toluene-induced behavioral manifestations. The present study determined the effects of various toluene doses on motor coordination, recognition memory, body temperature, and intracranial self-stimulation (ICSS) thresholds in mice. Additionally, the effects of sarcosine on the behavioral and physiological effects induced by toluene were evaluated. Sarcosine may reverse toluene-induced behavioral manifestations by acting as an NMDA receptor co-agonist and by inhibiting the effects of the type I glycine transporter (GlyT1). Mice were treated with toluene alone or combined with sarcosine pretreatment and assessed for rotarod performance, object recognition memory, rectal temperature, and ICSS thresholds. Toluene dose-dependently induced motor incoordination, recognition memory impairment, and hypothermia and lowered ICSS thresholds. Sarcosine pretreatment reversed toluene-induced changes in rotarod performance, novel object recognition, and rectal temperature but not ICSS thresholds. These findings suggest that the sarcosine-induced potentiation of NMDA receptors may reverse motor incoordination, memory impairment, and hypothermia but not the enhancement of brain stimulation reward function associated with toluene exposure. Sarcosine may be a promising compound to prevent acute toluene intoxications by occupational or intentional exposure. -- Highlights: ? Toluene induces impairments in Rotarod test and novel object recognition test. ? Toluene lowers rectal temperature and ICSS thresholds in mice. ? Sarcosine reverses toluene-induced changes in motor, memory and body temperature. ? Sarcosine pretreatment does not affect toluene-induced reward enhancement.

Chan, Ming-Huan [Department of Pharmacology and Toxicology, Tzu Chi University, Hualien, Taiwan (China) [Department of Pharmacology and Toxicology, Tzu Chi University, Hualien, Taiwan (China); Institute of Neuroscience, National Changchi University, Taipei, Taiwan (China); Chung, Shiang-Sheng [Department of Pharmacology and Toxicology, Tzu Chi University, Hualien, Taiwan (China) [Department of Pharmacology and Toxicology, Tzu Chi University, Hualien, Taiwan (China); Department of Pharmacy, Yuli Veterans Hospital, Hualien, Taiwan (China); Stoker, Astrid K.; Markou, Athina [Department of Psychiatry, School of Medicine, University of California San Diego, La Jolla, CA (United States)] [Department of Psychiatry, School of Medicine, University of California San Diego, La Jolla, CA (United States); Chen, Hwei-Hsien, E-mail: hwei@nhri.org.tw [Department of Pharmacology and Toxicology, Tzu Chi University, Hualien, Taiwan (China) [Department of Pharmacology and Toxicology, Tzu Chi University, Hualien, Taiwan (China); Division of Mental Health and Addiction Medicine, Institute of Population Health Sciences, National Health Research Institutes, Zhunan, Miaoli County, Taiwan (China)

2012-12-01T23:59:59.000Z

431

Efficient Motor System Tools Sponsored by the DOE Motor Challenge Program  

E-Print Network [OSTI]

efficiency, purchase price, energy costs, hours of operation, load factor, and utility rebates are taken into account. -Utility rebate program data, which includes minimum qualifying efficiency and rebate dollar values. -Menus and extensive Help screens... in accordance with these two assumptions, the private sector will supply the delivery mechanisms for Motor Challenge tools because they will represent a value added to their existing commercial products. Industry and DOE Drivers Industry and DOE, in general...

Blazewicz, S.; McCoy, G. A.; Olszewski, M.; Scheihing, P.

432

Student personal information: your personal data (Student Information Privacy notice -fair processing statement)  

E-Print Network [OSTI]

Student personal information: your personal data (Student Information Privacy notice -fair personal data In accordance with the Data Protection Act 1998, Heriot-Watt University is registered as the Data Controller for personal data we hold about you. The University collects and processes information

Greenaway, Alan

433

Personality Traits, Personality Disorder Dimensions, and Physical Health: The Predictive Ability of Self and Informant Reports  

E-Print Network [OSTI]

Informant-reported Physical Health .......................................................................................... 72 1 CHAPTER I INTRODUCTION As Allport (1937) famously stated, ďpersonality is something and personality does... somethingĒ (p. 48). What does personality do? Personality affects (and is affected by) oneís happiness and subjective well-being, physical health and longevity, mental health, interpersonal relationships, and occupational success (see Ozer & Benet...

Cooper, Luke D

2014-04-24T23:59:59.000Z

434

Multi-modal Transportation > Highway Transportation > Trucking > Railroad transportation > Public transit > Rural transportation > Rural transit > Freig pipeline transportation > Airport planning and development > Airport maintenance > Bicycle and pedestr  

E-Print Network [OSTI]

Multi-modal Transportation > Highway Transportation > Trucking > Railroad transportation > Public transit > Rural transportation > Rural transit > Freig pipeline transportation > Airport planning and development > Airport maintenance > Bicycle and pedestrian > Ports and waterways >>> Transportation ope

435

Graduate Studies Transportation Systems Engineering  

E-Print Network [OSTI]

Graduate Studies Transportation Systems Engineering TRANSPORTATION SYSTEMS The transportation that transportation systems engineering can promote a thriving economy and a better quality of life by ensuring that transportation systems themselves affect the environment through operations, construction, and maintenance

Jacobs, Laurence J.

436

Introduction Transport in disordered graphene  

E-Print Network [OSTI]

Introduction Transport in disordered graphene Summary Ballistic transport in disordered graphene P, Gornyi, Mirlin Ballistic transport in disordered graphene #12;Introduction Transport in disordered graphene Summary Outline 1 Introduction Model Experimental motivation Transport in clean graphene 2

Fominov, Yakov

437

Minnesota's Transportation Economic Development (TED)  

E-Print Network [OSTI]

Minnesota's Transportation Economic Development (TED) Pilot Program Center for Transportation Studies Transportation Research Conference May 24-25, 2011 #12;Transportation Role in Economic Development · Carefully targeted transportation infrastructure improvements will: ­ Stimulate new economic development

Minnesota, University of

438

Instrument for analysis of electric motors based on slip-poles component  

DOE Patents [OSTI]

A new instrument is described for monitoring the condition and speed of an operating electric motor from a remote location. The slip-poles component is derived from a motor current signal. The magnitude of the slip-poles component provides the basis for a motor condition monitor, while the frequency of the slip-poles component provides the basis for a motor speed monitor. The result is a simple-to-understand motor health monitor in an easy-to-use package. Straightforward indications of motor speed, motor running current, motor condition (e.g., rotor bar condition) and synthesized motor sound (audible indication of motor condition) are provided. With the device, a relatively untrained worker can diagnose electric motors in the field without requiring the presence of a trained engineer or technician. 4 figs.

Haynes, H.D.; Ayers, C.W.; Casada, D.A.

1996-11-26T23:59:59.000Z

439

Instrument for analysis of electric motors based on slip-poles component  

DOE Patents [OSTI]

A new instrument for monitoring the condition and speed of an operating electric motor from a remote location. The slip-poles component is derived from a motor current signal. The magnitude of the slip-poles component provides the basis for a motor condition monitor, while the frequency of the slip-poles component provides the basis for a motor speed monitor. The result is a simple-to-understand motor health monitor in an easy-to-use package. Straightforward indications of motor speed, motor running current, motor condition (e.g., rotor bar condition) and synthesized motor sound (audible indication of motor condition) are provided. With the device, a relatively untrained worker can diagnose electric motors in the field without requiring the presence of a trained engineer or technician.

Haynes, Howard D. (Knoxville, TN); Ayers, Curtis W. (Clinton, TN); Casada, Donald A. (Knoxville, TN)

1996-01-01T23:59:59.000Z

440

Brushless Motor Controller Report Spring 2010  

E-Print Network [OSTI]

. Pneumatic systems require large, heavy storage tanks for compressed air, necessitating large air compressors to fill up the tanks and often the energy consumed compressing the air is not considered in the cost a robot. When the goal is to minimize the cost of transport and improve the energy efficiency, the most

Ruina, Andy L.

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Multiple personality, a case study  

E-Print Network [OSTI]

. An exhaustive review of the literature revealed n& previous attempts at ut ilizing videotape therapy in the T. ea n&eni of rriultiple personali ty. Hnwever, via?. toping h&, s he, n !ncreosin&3!y llsea with great success in training therapists (Musan... personolity. Ir was also based on the past successes nf audio topes used in conjur!ation w!tn psychoanaiysis and hypnosis in the treat!nant of mal tip lr personalities. Following tt!e agree!nent to instItute videorape therapy inl. ! Ihe treat!ment plan...

Musick, William Daniel Anderson

1976-01-01T23:59:59.000Z

442

Microwave lamp with multi-purpose rotary motor  

DOE Patents [OSTI]

In a microwave powered electrodeless lamp, a single rotary motor is used to (a) rotate the bulb and (b) provide rotary motion to a blower or pump means for providing cooling fluid to the magnetron and/or to a forced gas cooler for providing cooling gas to the bulb. The blower may consist of only of an impeller without the usual blower housing. The motor, bulb stem and bulb, or motor, bulb stem, bulb and blower may be formed as an integral unit so as to facilitate replacement. 8 figs.

Ury, M.G.; Turner, B.; Wooten, R.D.

1999-02-02T23:59:59.000Z

443

Single phase two pole/six pole motor  

DOE Patents [OSTI]

A single phase alternating current two pole/six pole motor is provided with a main stator winding having six coils disposed unequally around the periphery of the machine. These coils are divided into two groups. When these groups are connected such that their magnetomotive forces are additive, two pole motor operation results. When the polarity of one of the groups is then reversed, six pole motor operation results. An auxiliary stator winding which is similar to the main stator winding is displaced from the main stator winding by 90 electrical degrees on a two pole basis.

Kirschbaum, Herbert S. (Asheville, NC)

1984-01-01T23:59:59.000Z

444

Single phase two pole/six pole motor  

DOE Patents [OSTI]

A single phase alternating current two pole/six pole motor is provided with a main stator winding having six coils disposed unequally around the periphery of the machine. These coils are divided into two groups. When these groups are connected such that their magnetomotive forces are additive, two pole motor operation results. When the polarity of one of the groups is then reversed, six pole motor operation results. An auxiliary stator winding which is similar to the main stator winding is displaced from the main stator winding by 90 electrical degrees on a two pole basis. 12 figs.

Kirschbaum, H.S.

1984-09-25T23:59:59.000Z

445

Microwave lamp with multi-purpose rotary motor  

DOE Patents [OSTI]

In a microwave powered electrodeless lamp, a single rotary motor is used to a) rotate the bulb and b) provide rotary motion to a blower or pump means for providing cooling fluid to the magnetron and/or to a forced gas cooling for providing cooler gas to the bulb. The blower may consist of only of an impeller without the usual blower housing. The motor, bulb stem and bulb, or motor, bulb stem, bulb and blower may be formed as an integral unit so as to facilitate replacement.

Ury, Michael G. (Bethesda, MD); Turner, Brian (Myersville, MD); Wooten, Robert D. (Rockville, MD)

1999-01-01T23:59:59.000Z

446

Transportation Baseline Schedule  

SciTech Connect (OSTI)

The ď1999 National Transportation Program - Transportation Baseline ReportĒ presents data that form a baseline to enable analysis and planning for future Department of Energy (DOE) Environmental Management (EM) waste/material transportation. The companion ď1999 Transportation ĎBarriersí AnalysisĒ analyzes the data and identifies existing and potential problems that may prevent or delay transportation activities based on the data presented. The ď1999 Transportation Baseline ScheduleĒ (this report) uses the same data to provide an overview of the transportation activities of DOE EM waste/materials. This report can be used to identify areas where stakeholder interface is needed, and to communicate to stakeholders the quantity/schedule of shipments going through their area. Potential bottlenecks in the transportation system can be identified; the number of packages needed, and the capacity needed at receiving facilities can be planned. This report offers a visualization of baseline DOE EM transportation activities for the 11 major sites and the ďGeologic Repository DisposalĒ site (GRD).

Fawcett, Ricky Lee; John, Mark Earl

2000-01-01T23:59:59.000Z

447

Real Time Flux Control in PM Motors  

SciTech Connect (OSTI)

Significant research at the Oak Ridge National Laboratory (ORNL) Power Electronics and Electric Machinery Research Center (PEEMRC) is being conducted to develop ways to increase (1) torque, (2) speed range, and (3) efficiency of traction electric motors for hybrid electric vehicles (HEV) within existing current and voltage bounds. Current is limited by the inverter semiconductor devices' capability and voltage is limited by the stator wire insulation's ability to withstand the maximum back-electromotive force (emf), which occurs at the upper end of the speed range. One research track has been to explore ways to control the path and magnitude of magnetic flux while the motor is operating. The phrase, real time flux control (RTFC), refers to this mode of operation in which system parameters are changed while the motor is operating to improve its performance and speed range. RTFC has potential to meet an increased torque demand by introducing additional flux through the main air gap from an external source. It can augment the speed range by diverting flux away from the main air gap to reduce back-emf at high speeds. Conventional RTFC technology is known as vector control [1]. Vector control decomposes the stator current into two components; one that produces torque and a second that opposes (weakens) the magnetic field generated by the rotor, thereby requiring more overall stator current and reducing the efficiency. Efficiency can be improved by selecting a RTFC method that reduces the back-emf without increasing the average current. This favors methods that use pulse currents or very low currents to achieve field weakening. Foremost in ORNL's effort to develop flux control is the work of J. S. Hsu. Early research [2,3] introduced direct control of air-gap flux in permanent magnet (PM) machines and demonstrated it with a flux-controlled generator. The configuration eliminates the problem of demagnetization because it diverts all the flux from the magnets instead of trying to oppose it. It is robust and could be particularly useful for PM generators and electric vehicle drives. Recent efforts have introduced a brushless machine that transfers a magneto-motive force (MMF) generated by a stationary excitation coil to the rotor [4]. Although a conventional PM machine may be field weakened using vector control, the air-gap flux density cannot be effectively enhanced. In Hsu's new machine, the magnetic field generated by the rotor's PM may be augmented by the field from the stationery excitation coil and channeled with flux guides to its desired destination to enhance the air-gap flux that produces torque. The magnetic field can also be weakened by reversing the current in the stationary excitation winding. A patent for advanced technology in this area is pending. Several additional RTFC methods have been discussed in open literature. These include methods of changing the number of poles by magnetizing and demagnetizing the magnets poles with pulses of current corresponding to direct-axis (d-axis) current of vector control [5,6], changing the number of stator coils [7], and controlling the air gap [8]. Test experience has shown that the magnet strengths may vary and weaken naturally as rotor temperature increases suggesting that careful control of the rotor temperature, which is no easy task, could yield another method of RTFC. The purpose of this report is to (1) examine the interaction of rotor and stator flux with regard to RTFC, (2) review and summarize the status of RTFC technology, and (3) compare and evaluate methods for RTFC with respect to maturity, advantages and limitations, deployment difficulty and relative complexity.

Otaduy, P.J.

2005-09-27T23:59:59.000Z

448

Water Transport Within the STack: Water Transport Exploratory...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Within the STack: Water Transport Exploratory Studies Water Transport Within the STack: Water Transport Exploratory Studies Part of a 100 million fuel cell award announced by DOE...

449

Hybrid Cascaded H-bridges Multilevel Motor Drive Control for Electric Vehicles  

E-Print Network [OSTI]

Hybrid Cascaded H-bridges Multilevel Motor Drive Control for Electric Vehicles Zhong Du1 , Leon M vehicle motor drive applications and hybrid electric vehicle motor drive applications. Keywords: hybrid cascaded H-bridge multilevel converter, DC voltage balance control, multilevel motor drive, electric

Tolbert, Leon M.

450

Spatially Similar Practice Immediately Following Motor Sequence Learning Eliminates Offline Gains  

E-Print Network [OSTI]

early during motor sequence learning but highlight the sensitivity of offline gains to task practice order....

Handa, Atul

2012-11-30T23:59:59.000Z

451

Directed Transport of Atoms in a Hamiltonian Quantum Ratchet  

E-Print Network [OSTI]

We demonstrate the operation of a quantum ratchet in the absence of dissipative processes within the observation time (Hamiltonian regime). An atomic rubidium Bose-Einstein condensate is exposed to a sawtooth-like optical lattice potential, whose amplitude is periodically modulated in time. The ratchet transport arises from broken spatiotemporal symmetries of the driven potential, resulting in a desymmetrisation of transporting Eigenstates (Floquet states). The measured atomic current oscillates around a non-zero stationary value at longer observation times, shows resonances at positions determined by the photon recoil and depends on the initial phase of the drive, providing different lines of evidence for the full quantum character of the ratchet transport. The results provide a proof of principle demonstration of a quantum motor.

Salger, Tobias; Hecking, Tim; Geckeler, Carsten; Morales-Molina, Luis; Weitz, Martin; 10.1126/science.1179546

2009-01-01T23:59:59.000Z

452

Development of a high power density motor for aircraft propulsion  

E-Print Network [OSTI]

are currently powered by heavy gas turbine engines that require fueling. The development of electric motors to replace gas turbines would be a big step towards accomplishing more efficient aircraft propulsion. The primary objective of this research extends...

Dibua, Imoukhuede Tim Odion

2007-04-25T23:59:59.000Z

453

Learning About Wind Turbine Technology, Motors and Generators...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

focused on topics outside of electric machines, to learn about the physics behind motors and generators. It is hard to believe that this technology has been around for well...

454

VEE-0033- In the Matter of Nugent Motor Company  

Broader source: Energy.gov [DOE]

On October 16, 1996, Nugent Motor company (Nugent) of Colebrook, New Hampshire, filed an Application for Exception with the Office of Hearings and Appeals of the Department of Energy. In its...

455

Second Skin : motion capture with actuated feedback for motor learning  

E-Print Network [OSTI]

Second Skin aims to combine three-dimensional (3D) motion tracking with tactile feedback for the purpose of improving users' motor-learning ability. Such a system would track a user's body and limb movements as he or she ...

Miaw, Dennis (Dennis R.)

2010-01-01T23:59:59.000Z

456

alters motor behavior: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

A ribosome can be regarded as a molecular motor which utilizes the input chemical energy to move on a messenger RNA (mRNA) track that also serves as a template for the...

457

Variable Frequency Motor Drives: Harmonics, Power Factor, and Energy Efficiency  

E-Print Network [OSTI]

Variable frequency motor drives (VFD's) have been on the market for many years. Early versions were unreliable and prone to failure. Relatively recent developments in Pulse-Width Modulated (PWM) waveform technology have improved VFD reliability...

Massey, G. W.

458

STATEMENT OF CONSIDERATIONS REQUEST BY GENERAL MOTORS CORPORATION...  

Broader source: Energy.gov (indexed) [DOE]

ADVANCE WAIVER OF DOMESTIC AND FOREIGN INVENTION RIGHTS UNDER DOE COOPERATIVE AGREEMENT NO. DE-FC26-04NT42278; W(A)-04-070, CH-1248 The Petitioner, General Motors Corporation (GM)...

459

The impact of haptic guidance on musical motor learning  

E-Print Network [OSTI]

Skilled musical performance provides one of the best demonstrations of the upper limits of the human motor system's capabilities. It is therefore not surprising that learning to play an instrument is a long and difficult ...

Grindlay, Graham Charles

2007-01-01T23:59:59.000Z

460

The US Motor Systems Market Assessment: Baseline and Survey Methods  

E-Print Network [OSTI]

industrial facilities, a basis for projecting changes in that inventory, and a framework for estimating the effect of Motor Challenge on industrial electric consumption. The paper describes the objectives and principal research activities of the Market...

Rosenberg, M.

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Electric Motor Maintenance & Repair for Long Term Efficiency  

E-Print Network [OSTI]

Energy costs to operate electric motors can be a significant part of an operating budget. For example, a recent survey of California water departments reveals energy costs for pumping and treating water may be 25% of operating costs. Strategies...

Brithinee, W. P.

462

Symmetry Relations for Trajectories of a Brownian Motor  

E-Print Network [OSTI]

A Brownian Motor is a nanoscale or molecular device that combines the effects of thermal noise, spatial or temporal asymmetry, and directionless input energy to drive directed motion. Because of the input energy, Brownian motors function away from thermodynamic equilibrium and concepts such as linear response theory, fluctuation dissipation relations, and detailed balance do not apply. The {\\em generalized} fluctuation-dissipation relation, however, states that even under strongly thermodynamically non-equilibrium conditions the ratio of the probability of a transition to the probability of the time-reverse of that transition is the exponent of the change in the internal energy of the system due to the transition. Here, we derive an extension of the generalized fluctuation dissipation theorem for a Brownian motor for the ratio between the probability for the motor to take a forward step and the probability to take a backward step.

R. Dean Astumian

2007-05-15T23:59:59.000Z

463

Ameren Illinois (Electric)- Custom, HVAC, and Motor Business Efficiency Incentives  

Broader source: Energy.gov [DOE]

Prescriptive rebates are available for many HVAC and motor efficiency improvements. Pre-approval is required for all rebates. The programs are available only to non-residential customers that...

464

Advanced Power Electronics and Electric Motors Annual Report -- 2013  

SciTech Connect (OSTI)

This report describes the research into advanced liquid cooling, integrated power module cooling, high temperature air cooled power electronics, two-phase cooling for power electronics, and electric motor thermal management by NREL's Power Electronics group in FY13.

Narumanchi, S.; Bennion, K.; DeVoto, D.; Moreno, G.; Rugh, J.; Waye, S.

2015-01-01T23:59:59.000Z

465

Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type...  

Gasoline and Diesel Fuel Update (EIA)

150.0 2,026.7 W W 234.5 161.7 - 396.3 See footnotes at end of table. 43. Refiner Motor Gasoline Volumes by Grade, Sales Type, PAD District, and State 262 Energy Information...

466

Table 48. Prime Supplier Sales Volumes of Motor Gasoline by...  

U.S. Energy Information Administration (EIA) Indexed Site

- - 466.1 466.1 See footnotes at end of table. 48. Prime Supplier Sales Volumes of Motor Gasoline by Grade, Formulation, PAD District, and State 356 Energy Information...

467

Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

253.2 2,222.4 W W 206.4 134.3 - 340.7 See footnotes at end of table. 43. Refiner Motor Gasoline Volumes by Grade, Sales Type, PAD District, and State 262 Energy Information...

468

Table 48. Prime Supplier Sales Volumes of Motor Gasoline by...  

U.S. Energy Information Administration (EIA) Indexed Site

- - 532.1 532.1 See footnotes at end of table. 48. Prime Supplier Sales Volumes of Motor Gasoline by Grade, Formulation, PAD District, and State 356 Energy Information...

469

3D-Printed Car by Local Motors- The Strati  

Broader source: Energy.gov [DOE]

A timelapse video of the production process behind The Strati - the 3D-printed car by Local Motors, which manufactured with Oak Ridge National Laboratory (ORNL) and delivered at the International Manufacturing Technology Show (IMTS) in September of 2014.

470

Inventing a Novel Sensor for Online Motor Monitoring | GE Global...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Inventing a Novel Sensor for Online Motor Monitoring Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new...

471

Inter-fingercoordinated DC motor driven grasping robotic hand  

E-Print Network [OSTI]

Many robotic hands have individually driven joints, which is both energy inefficient and complicated to control. An alternative method includes employing only one motor to control multiple joints. Investigating humanoid ...

Wikman, Sarah Jane

2009-01-01T23:59:59.000Z

472

Visual Experience and Motor Action: Are The Bonds Too Tight?†  

E-Print Network [OSTI]

How should we characterize the functional role of conscious visual experience? In particular, how do the conscious contents of visual experience guide, bear upon, or otherwise inform our ongoing motor activities? According ...

Clark, Andy

2001-01-01T23:59:59.000Z

473

Obstacles and Opportunity: Turbine Motorization in Refineries Today  

E-Print Network [OSTI]

Steam turbines have been widely used in oil refineries for driving pumps, compressors and other rotary machines. However, in recent years, the authors of this paper have seen substantial turbine motorization projects completed or being planned...

Feng, Hua; Liu, Jinghing; Liu, Xiang; Ahmad, Mushtaq; Deng, Alan

2012-01-01T23:59:59.000Z

474

Economic Realities and Energy Efficient Polyphase Integral Horsepower Electric Motors  

E-Print Network [OSTI]

Energy efficient polyphase integral horsepower electric motors are currently being vigorously promoted as a profitable method of conserving energy in many industrial and commercial applications. While the goal to be attained is indeed laudable...

Whittington, B. W.

1980-01-01T23:59:59.000Z

475

High Efficiency Fans and High Efficiency Electrical Motors  

E-Print Network [OSTI]

Replacing nominal efficient electrical motors with premium efficiency can save on electrical power costs in cotton gins. Connected horsepower load on industrial air fans is approximately 60% of the total horsepower in a typical cotton gin...

Breedlove, C. W.

476

An economical single to three phase converter for induction motors  

E-Print Network [OSTI]

There are several different types of single to three phase converters for induction motors available today. However, many of the presently available phase converters suffer from disadvantages such as high cost or low performance. An economical...

Di Zerega, Philp Van Uytandaele

1994-01-01T23:59:59.000Z

477

How to Improve Productivity with Energy-Efficient Motors  

E-Print Network [OSTI]

productivity is to reduce costs, particularly those which are rising faster than others such as electricity. Today's new energy efficient motors reduce the kilowatts consumed, thus reducing electric bills and improving productivity. This paper will discuss...

Curley, J. P.

1983-01-01T23:59:59.000Z

478

adapted phi29 motor: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: Coordinated Adaptive Robust Contour Tracking of Linear-Motor-Driven Tables in Task Space 1 Li Xu: byao@ecn.purdue.edu Abstract In order to improve the overall contouring...

479

Petroleum Products Table 31. Motor Gasoline Prices by Grade...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

99.2 - 105.3 See footnotes at end of table. 56 Energy Information AdministrationPetroleum Marketing Annual 2000 Table 31. Motor Gasoline Prices by Grade, Sales Type, PAD...

480

Petroleum Products Table 31. Motor Gasoline Prices by Grade...  

Gasoline and Diesel Fuel Update (EIA)

66.6 - 72.3 See footnotes at end of table. 56 Energy Information Administration Petroleum Marketing Annual 1995 Table 31. Motor Gasoline Prices by Grade, Sales Type, PAD...

Note: This page contains sample records for the topic "motorized personal transportation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Petroleum Products Table 43. Refiner Motor Gasoline Volumes...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

133.6 - 276.4 See footnotes at end of table. 220 Energy Information AdministrationPetroleum Marketing Annual 2000 Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type,...

482

Petroleum Products Table 43. Refiner Motor Gasoline Volumes...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

201.3 - 453.3 See footnotes at end of table. 262 Energy Information Administration Petroleum Marketing Annual 1995 Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type,...

483

System Cost Analysis for an Interior Permanent Magnet Motor  

SciTech Connect (OSTI)

The objective of this program is to provide an assessment of the cost structure for an interior permanent magnet ('IPM') motor which is designed to meet the 2010 FreedomCAR specification. The program is to evaluate the range of viable permanent magnet materials for an IPM motor, including sintered and bonded grades of rare earth magnets. The study considers the benefits of key processing steps, alternative magnet shapes and their assembly methods into the rotor (including magnetization), and any mechanical stress or temperature limits. The motor's costs are estimated for an annual production quantity of 200,000 units, and are broken out into such major components as magnetic raw materials, processing and manufacturing. But this is essentially a feasibility study of the motor's electromagnetic design, and is not intended to include mechanical or thermal studies as would be done to work up a selected design for production.

Peter Campbell

2008-08-01T23:59:59.000Z

484

A high-speed hysteresis motor spindle for machining applications  

E-Print Network [OSTI]

An analysis of suitable drive technologies for use in a new high-speed machining spindle was performed to determine critical research areas. The focus is on a hysteresis motor topology using a solid, inherently-balanced ...

Bayless, Jacob D. (Jacob Daniel)

2014-01-01T23:59:59.000Z

485

Combined passive bearing element/generator motor  

DOE Patents [OSTI]

An electric machine includes a cylindrical rotor made up of an array of permanent magnets that provide a N-pole magnetic field of even order (where N=4, 6, 8, etc.). This array of permanent magnets has bars of identical permanent magnets made of dipole elements where the bars are assembled in a circle. A stator inserted down the axis of the dipole field is made of two sets of windings that are electrically orthogonal to each other, where one set of windings provides stabilization of the stator and the other set of windings couples to the array of permanent magnets and acts as the windings of a generator/motor. The rotor and the stator are horizontally disposed, and the rotor is on the outside of said stator. The electric machine may also include two rings of ferromagnetic material. One of these rings would be located at each end of the rotor. Two levitator pole assemblies are attached to a support member that is external to the electric machine. These levitator pole assemblies interact attractively with the rings of ferromagnetic material to produce a levitating force upon the rotor.

Post, Richard F. (Walnut Creek, CA)

2000-01-01T23:59:59.000Z

486

Motorized manipulator for positioning a TEM specimen  

DOE Patents [OSTI]

The invention relates to a motorized manipulator for positioning a TEM specimen holder with sub-micron resolution parallel to a y-z plane and rotating the specimen holder in the y-z plane, the manipulator comprising a base (2), and attachment means (30) for attaching the specimen holder to the manipulator, characterized in that the manipulator further comprises at least three nano-actuators (3.sup.a, 3.sup.b, 3.sup.c) mounted on the base, each nano-actuator showing a tip (4.sup.a, 4.sup.b, 4.sup.c), the at least three tips defining the y-z plane, each tip capable of moving with respect to the base in the y-z plane; a platform (5) in contact with the tips of the nano-actuators; and clamping means (6) for pressing the platform against the tips of the nano-actuators; as a result of which the nano-actuators can rotate the platform with respect to the base in the y-z plane and translate the platform parallel to the y-z plane.

Schmid, Andreas Karl (Berkeley, CA); Andresen, Nord (Berkeley, CA)

2010-12-14T23:59:59.000Z

487

Restructuring: The Changing Face of Motor Gasoline Marketing  

Reports and Publications (EIA)

This report reviews the U.S. motor gasoline marketing industry during the period 1990 to 1999, focusing on changes that occurred during the period. The report incorporates financial and operating data from the Energy Information Administration's Financial Reporting System (FRS), motor gasoline outlet counts collected by the National Petroleum News from the states, and U.S. Census Bureau salary and employment data published in County Business Patterns.

2001-01-01T23:59:59.000Z

488

Alternatives to traditional transportation fuels 1993  

SciTech Connect (OSTI)

In recent years, gasoline and diesel fuel have accounted for about 80 percent of total transportation fuel and nearly all of the fuel used in on-road vehicles. Growing concerns about the environmental effects of fossil fuel use and the Nation`s high level of dependence on foreign oil are providing impetus for the development of replacements or alternatives for these traditional transportation fuels. (The Energy Policy Act of 1992 definitions of {open_quotes}replacement{close_quotes} and {open_quotes}alternative{close_quotes} fuels are presented in the following box.) The Alternative Motor Fuels Act of 1988, the Clean Air Act Amendments of 1990 (CAAA90) and the Energy Policy Act of 1992 (EPACT) are significant legislative forces behind the growth of replacement fuel use. Alternatives to Traditional Transportation Fuels 1993 provides the number of on-road alternative fueled vehicles in use in the United States, alternative and replacement fuel consumption, and information on greenhouse gas emissions resulting from the production, delivery, and use of replacement fuels for 1992, 1993, and 1995.

Not Available

1995-01-01T23:59:59.000Z

489

Motor Systems Assessment Training, Including Use of the Motor Systems Tool Suite  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d F S i DOE TribaltheMyMinutesDepartmentCharacteristics | Motor

490

Transportation Infrastructure and Sustainable Development  

E-Print Network [OSTI]

A Better Forecasting Tool for Transportation Decision-making,Ē Mineta Transportation Institute, San Jose Stateat the 2008 meeting of the Transportation Research Board and

Boarnet, Marlon G.

2008-01-01T23:59:59.000Z

491

Transportation Analysis | Clean Energy | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Transportation Analysis SHARE Transportation Analysis Transportation Analysis efforts at Oak Ridge National Laboratory contribute to the efficient, safe, and free movement of...

492

The universal radiative transport equation  

E-Print Network [OSTI]

THE UNIVERSAL RADIATIVE TRANSPORT EQUATION Rudolph W.The Universal Radiative Transport Equation Rudolph W.The various radiative transport equations used in general

Preisendorfer, Rudolph W

1959-01-01T23:59:59.000Z

493

Transportation Management Workshop: Proceedings  

SciTech Connect (OSTI)

This report is a compilation of discussions presented at the Transportation Management Workshop held in Gaithersburg, Maryland. Topics include waste packaging, personnel training, robotics, transportation routing, certification, containers, and waste classification.

Not Available

1993-10-01T23:59:59.000Z

494

Packaging and Transportation Safety  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

Establishes safety requirements for the proper packaging and transportation of offsite shipments and onsite transfers of hazardous materials andor modal transport. Cancels DOE 1540.2 and DOE 5480.3

1995-09-27T23:59:59.000Z

495

Packaging and Transportation Safety  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

Establishes safety requirements for the proper packaging and transportation of Department of Energy (DOE) offsite shipments and onsite transfers of hazardous materials and for modal transport. Canceled by DOE 460.1A

1995-09-27T23:59:59.000Z

496

Packaging and Transportation Safety  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

Establishes safety requirements for the proper packaging and transportation of Department of Energy (DOE) offsite shipments and onsite transfers of hazardous materials and for modal transport. Cancels DOE O 460.1.

1996-10-02T23:59:59.000Z

497

Transportation Investment and  

E-Print Network [OSTI]

Transportation Investment and Economic Development: Has the TIED turned? David Levinson University Transportation Investments was Historically Concomitant with Land and Economic Development #12;Canals Railways Surfaced Roads Crude Oil Pipelines Gas Pipelines Telegraph 1825 1985 Proportion of Maximum Extent Growth

Levinson, David M.

498

Bodleian Libraries'Admissions Office Personal Details  

E-Print Network [OSTI]

and held securely in the University's shared Development and Alumni Relations System (DARS): DARS provides.alumni.ox.ac.uk/data_protection for information on the way in which your personal data are held and used in DARS. Some sensitive personal data may be held in DARS. If, at any time, you have any queries about the use of your personal data in DARS or wish

Oxford, University of

499

Model Studies of the Dynamics of Bacterial Flagellar Motors  

SciTech Connect (OSTI)

The Bacterial Flagellar Motor is a rotary molecular machine that rotates the helical filaments which propel swimming bacteria. Extensive experimental and theoretical studies exist on the structure, assembly, energy input, power generation and switching mechanism of the motor. In our previous paper, we explained the general physics underneath the observed torque-speed curves with a simple two-state Fokker-Planck model. Here we further analyze this model. In this paper we show (1) the model predicts that the two components of the ion motive force can affect the motor dynamics differently, in agreement with the latest experiment by Lo et al.; (2) with explicit consideration of the stator spring, the model also explains the lack of dependence of the zero-load speed on stator number in the proton motor, recently observed by Yuan and Berg; (3) the model reproduces the stepping behavior of the motor even with the existence of the stator springs and predicts the dwelling time distribution. Predicted stepping behavior of motors with two stators is discussed, and we suggest future experimental verification.

Bai, F; Lo, C; Berry, R; Xing, J

2009-03-19T23:59:59.000Z

500

Electric motor systems in developing countries: Opportunities for efficiency improvement  

SciTech Connect (OSTI)

This report presents an overview of the current status and efficiency improvement potential of industrial motor systems in developing countries. Better management of electric motor systems is of particular relevance in developing countries, where improved efficiency can lead to increased productivity and slower growth in electricity demand. Motor systems currently consume some 65--80% of the industrial electricity in developing countries. Drawing on studies from Thailand, India, Brazil, China, Pakistan, and Costa Rica, we describe potential efficiency gains in various parts of the motor system, from the electricity delivery system through the motor to the point where useful work is performed. We report evidence of a significant electricity conservation potential. Most of the efficiency improvement methods we examine are very cost-effective from a societal viewpoint, but are generally not implemented due to various barriers that deter their adoption. Drawing on experiences in North America, we discuss a range of policies to overcome these barriers, including education, training, minimum efficiency standards, motor efficiency testing protocols, technical assistance programs, and financial incentives.

Meyers, S.; Monahan, P.; Lewis, P.; Greenberg, S. [Lawrence Berkeley Lab., CA (United States); Nadel, S. [American Council for an Energy-Efficient Economy, Washington, DC (United States)

1993-08-01T23:59:59.000Z