National Library of Energy BETA

Sample records for mossi multiple languages

  1. Studies on the development of mossy zinc electrodeposits from flowing alkaline electrolytes

    SciTech Connect (OSTI)

    Mc Vay, L.

    1991-07-01

    The initiation and characteristics of mossy zinc electrodeposits have been investigated. Batteries with zinc electrodes are candidates for electric vehicle applications; however, this electrode is prone to form non-compact deposits that contribute to capacity loss and battery failure. Moss is deposited when the current density is far from the limiting current. This morphology first appears only after the bulk deposit is approximately 1 {mu}m thick. In this investigation, the effects of flow rate (Re=0--4000), current density (0--50 mA/cm{sup 2}), concentration of the electroactive species (0.25 and 0.5 M), and the concentration of supporting electrolyte (3, 6, and 12 M) on the initiation of moss were examined. The rotating concentric cylinder electrode was employed for most of the experiments; and a flow channel was used to study the development of morphology. After the experiment, the deposit was characterized using microscopic, x-ray diffraction, and profilometric techniques. 94 refs., 72 figs.

  2. Multiplicity Counting

    SciTech Connect (OSTI)

    Geist, William H.

    2015-12-01

    This set of slides begins by giving background and a review of neutron counting; three attributes of a verification item are discussed: 240Pueff mass; α, the ratio of (α,n) neutrons to spontaneous fission neutrons; and leakage multiplication. It then takes up neutron detector systems – theory & concepts (coincidence counting, moderation, die-away time); detector systems – some important details (deadtime, corrections); introduction to multiplicity counting; multiplicity electronics and example distributions; singles, doubles, and triples from measured multiplicity distributions; and the point model: multiplicity mathematics.

  3. Introduction to PGAS Languages

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PGAS Languages Introduction to PGAS Languages Introduction Partitioned Global Address Space Languages (PGAS) provide a parallel programming model based on the assumption that the global memory adress space is logically partitioned with a portion of the memory being assigned to a specific processor. Two common PGAS languages are Unified Parallel C (UPC) and Co-array Fortran (CAF). The first implementation of this tutorial is based on UPC and CAF. This tutorial assumes that you have some

  4. Flexible Language Constructs for Large Parallel Programs

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Rosing, Matt; Schnabel, Robert

    1994-01-01

    The goal of the research described in this article is to develop flexible language constructs for writing large data parallel numerical programs for distributed memory (multiple instruction multiple data [MIMD]) multiprocessors. Previously, several models have been developed to support synchronization and communication. Models for global synchronization include single instruction multiple data (SIMD), single program multiple data (SPMD), and sequential programs annotated with data distribution statements. The two primary models for communication include implicit communication based on shared memory and explicit communication based on messages. None of these models by themselves seem sufficient to permit the natural and efficient expression ofmore » the variety of algorithms that occur in large scientific computations. In this article, we give an overview of a new language that combines many of these programming models in a clean manner. This is done in a modular fashion such that different models can be combined to support large programs. Within a module, the selection of a model depends on the algorithm and its efficiency requirements. In this article, we give an overview of the language and discuss some of the critical implementation details.« less

  5. CLAMR (Compute Language Adaptive Mesh Refinement)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CLAMR (Compute Language Adaptive Mesh Refinement) CLAMR (Compute Language Adaptive Mesh Refinement) CLAMR (Compute Language Adaptive Mesh Refinement) is being developed as a DOE...

  6. Natural language modeling

    SciTech Connect (OSTI)

    Sharp, J.K.

    1997-11-01

    This seminar describes a process and methodology that uses structured natural language to enable the construction of precise information requirements directly from users, experts, and managers. The main focus of this natural language approach is to create the precise information requirements and to do it in such a way that the business and technical experts are fully accountable for the results. These requirements can then be implemented using appropriate tools and technology. This requirement set is also a universal learning tool because it has all of the knowledge that is needed to understand a particular process (e.g., expense vouchers, project management, budget reviews, tax, laws, machine function).

  7. Emulating Multiple Inheritance in Fortran 2003/2008

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Morris, Karla

    2015-01-01

    Although the high-performance computing (HPC) community increasingly embraces object-oriented programming (OOP), most HPC OOP projects employ the C++ programming language. Until recently, Fortran programmers interested in mining the benefits of OOP had to emulate OOP in Fortran 90/95. The advent of widespread compiler support for Fortran 2003 now facilitates explicitly constructing object-oriented class hierarchies via inheritance and leveraging related class behaviors such as dynamic polymorphism. Although C++ allows a class to inherit from multiple parent classes, Fortran and several other OOP languages restrict or prohibit explicit multiple inheritance relationships in order to circumvent several pitfalls associated with them. Nonetheless, whatmore » appears as an intrinsic feature in one language can be modeled as a user-constructed design pattern in another language. The present paper demonstrates how to apply the facade structural design pattern to support a multiple inheritance class relationship in Fortran 2003. The design unleashes the power of the associated class relationships for modeling complicated data structures yet avoids the ambiguities that plague some multiple inheritance scenarios.« less

  8. QA Standard Contract Language Deliverable

    Office of Environmental Management (EM)

    QA Contract Language Department of Energy Washington, DC 20585 AUG 2 1 2009 MEMORANDUM FOR ... three options for complying with this contract requirement: 1. Develop and submit for ...

  9. Domain-Specific Languages for Composing Signature Discovery Workflows

    SciTech Connect (OSTI)

    Jacob, Ferosh; Gray, Jeff; Wynne, Adam S.; Liu, Yan; Baker, Nathan A.

    2012-10-23

    Domain-agnostic signature discovery entails investigation across multiple scientific disciplines. The breadth and cross-disciplinary nature of this work requires that existing executables be integrated with new capabilities into workflows, representing a wide range of user tasks. An algorithm may be written in multiple programming languages for various hardware platforms, and so workflow composition requires integrating executables from any number of remote hosts. This raises an engineering issue on how to generate web service wrappers for these heterogeneous executables and to compose them into a scientific workflow environment (e.g., Taverna). In this paper, we introduce two simple Domain-Specific Languages (DSLs) to automate these processes. Our Service Description Language (SDL) describes key elements of a signature discovery service and automatically generates its implementation code. The Workflow Description Language (WDL) describes the pipeline of services and generates deployable artifacts for the Taverna workflow management system. We demonstrate our approach with a real-world workflow composed of services wrapping remote executables.

  10. Plain Language Training Classes | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Plain Language Training Classes Plain Language Training Classes February 18, 2016 7:30AM to 10:30AM MST Plain Language Training Classes When you write, do you write what you want ...

  11. V-094: IBM Multiple Products Multiple Vulnerabilities | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Multiple Vulnerabilities V-132: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities V-145: IBM Tivoli Federated Identity Manager Products Java Multiple ...

  12. Software engineering and graphical programming languages

    SciTech Connect (OSTI)

    Jefferson, K.; Porter, T.; West, T.

    1997-11-01

    This report contains viewgraphs on software engineering and adapting engineering processes to a graphical programming languages.

  13. Multiple density layered insulator

    DOE Patents [OSTI]

    Alger, T.W.

    1994-09-06

    A multiple density layered insulator for use with a laser is disclosed which provides at least two different insulation materials for a laser discharge tube, where the two insulation materials have different thermoconductivities. The multiple layer insulation materials provide for improved thermoconductivity capability for improved laser operation. 4 figs.

  14. Multiple density layered insulator

    DOE Patents [OSTI]

    Alger, Terry W.

    1994-01-01

    A multiple density layered insulator for use with a laser is disclosed wh provides at least two different insulation materials for a laser discharge tube, where the two insulation materials have different thermoconductivities. The multiple layer insulation materials provide for improved thermoconductivity capability for improved laser operation.

  15. Plain Language Training | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Plain Language Training Plain Language Training The Department has an active and popular Plain Language Training Program. Between April 2013 and March 2014, there were six Plain Language Training Classes at Forrestal and two at Germantown, attended by a total of 189 employees and contractors. Classes generally reach their size limit, and overflows are placed in the next scheduled class. Since August 2011, there have been 23 Plain Language Classes at Forrestal and eight at Germantown. In April

  16. Photovoltaics: Separating Multiple Excitons

    SciTech Connect (OSTI)

    Nozik, A. J.

    2012-05-01

    Scientists have demonstrated an efficient process for generating multiple excitons in adjacent silicon nanocrystals from a single high-energy photon. Their findings could prove useful for a wide range of photovoltaic applications.

  17. Multiple shell fusion targets

    DOE Patents [OSTI]

    Lindl, J.D.; Bangerter, R.O.

    1975-10-31

    Multiple shell fusion targets for use with electron beam and ion beam implosion systems are described. The multiple shell targets are of the low-power type and use a separate relatively low Z, low density ablator at large radius for the outer shell, which reduces the focusing and power requirements of the implosion system while maintaining reasonable aspect ratios. The targets use a high Z, high density pusher shell placed at a much smaller radius in order to obtain an aspect ratio small enough to protect against fluid instability. Velocity multiplication between these shells further lowers the power requirements. Careful tuning of the power profile and intershell density results in a low entropy implosion which allows breakeven at low powers. For example, with ion beams as a power source, breakeven at 10-20 Terrawatts with 10 MeV alpha particles for imploding a multiple shell target can be accomplished.

  18. L3 Interactive Data Language

    Energy Science and Technology Software Center (OSTI)

    2006-09-05

    The L3 system is a computational steering environment for image processing and scientific computing. It consists of an interactive graphical language and interface. Its purpose is to help advanced users in controlling their computational software and assist in the management of data accumulated during numerical experiments. L3 provides a combination of features not found in other environments; these are: - textual and graphical construction of programs - persistence of programs and associated data - directmore » mapping between the scripts, the parameters, and the produced data - implicit hierarchial data organization - full programmability, including conditionals and functions - incremental execution of programs The software includes the l3 language and the graphical environment. The language is a single-assignment functional language; the implementation consists of lexer, parser, interpreter, storage handler, and editing support, The graphical environment is an event-driven nested list viewer/editor providing graphical elements corresponding to the language. These elements are both the represenation of a users program and active interfaces to the values computed by that program.« less

  19. Multiple stage multiple filter hydrate store

    DOE Patents [OSTI]

    Bjorkman, H.K. Jr.

    1983-05-31

    An improved hydrate store for a metal halogen battery system is disclosed which employs a multiple stage, multiple filter means for separating the halogen hydrate from the liquid used in forming the hydrate. The filter means is constructed in the form of three separate sections which combine to substantially cover the interior surface of the store container. Exit conduit means is provided in association with the filter means for transmitting liquid passing through the filter means to a hydrate former subsystem. The hydrate former subsystem combines the halogen gas generated during the charging of the battery system with the liquid to form the hydrate in association with the store. Relief valve means is interposed in the exit conduit means for controlling the operation of the separate sections of the filter means, such that the liquid flow through the exit conduit means from each of the separate sections is controlled in a predetermined sequence. The three separate sections of the filter means operate in three discrete stages to provide a substantially uniform liquid flow to the hydrate former subsystem during the charging of the battery system. The separation of the liquid from the hydrate causes an increase in the density of the hydrate by concentrating the hydrate along the filter means. 7 figs.

  20. Multiple stage multiple filter hydrate store

    DOE Patents [OSTI]

    Bjorkman, Jr., Harry K.

    1983-05-31

    An improved hydrate store for a metal halogen battery system is disclosed which employs a multiple stage, multiple filter means or separating the halogen hydrate from the liquid used in forming the hydrate. The filter means is constructed in the form of three separate sections which combine to substantially cover the interior surface of the store container. Exit conduit means is provided in association with the filter means for transmitting liquid passing through the filter means to a hydrate former subsystem. The hydrate former subsystem combines the halogen gas generated during the charging of the battery system with the liquid to form the hydrate in association with the store. Relief valve means is interposed in the exit conduit means for controlling the operation of the separate sections of the filter means, such that the liquid flow through the exit conduit means from each of the separate sections is controlled in a predetermined sequence. The three separate sections of the filter means operate in three discrete stages to provide a substantially uniform liquid flow to the hydrate former subsystem during the charging of the battery system. The separation of the liquid from the hydrate causes an increase in the density of the hydrate by concentrating the hydrate along the filter means.

  1. Domain-Specific Languages For Developing and Deploying Signature Discovery Workflows

    SciTech Connect (OSTI)

    Jacob, Ferosh; Wynne, Adam S.; Liu, Yan; Gray, Jeff

    2013-12-02

    Domain-agnostic Signature Discovery entails scientific investigation across multiple domains through the re-use of existing algorithms into workflows. The existing algorithms may be written in any programming language for various hardware architectures (e.g., desktops, commodity clusters, and specialized parallel hardware platforms). This raises an engineering issue in generating Web services for heterogeneous algorithms so that they can be composed into a scientific workflow environment (e.g., Taverna). In this paper, we present our software tool that defines two simple Domain-Specific Languages (DSLs) to automate these processes: SDL and WDL. Our Service Description Language (SDL) describes key elements of a signature discovery algorithm and generates the service code. The Workflow Description Language (WDL) describes the pipeline of services and generates deployable artifacts for the Taverna workflow management system. We demonstrate our tool with a landscape classification example that is represented by BLAST workflows composed of services that wrap original scripts.

  2. PGAS Language Codes (UPC, Coarray Fortran)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Unified Parallel C is a partitioned global address space (PGAS) language and an extension of the C programming language. It is designed for HPC systems and allows the programmer to ...

  3. Extension Modules for the Python Interpretive language

    Energy Science and Technology Software Center (OSTI)

    2006-12-29

    Python is an interpreted computer language, freely available to all, which may be extended by user developed "modules". These modules ay be written in a complied language such as 'C', and then linked into the Python program

  4. Multiple sort flow cytometer

    DOE Patents [OSTI]

    Engh, G. van den; Esposito, R.J.

    1996-01-09

    A flow cytometer utilizes multiple lasers for excitation and respective fluorescence of identified dyes bonded to specific cells or events to identify and verify multiple events to be sorted from a sheath flow and droplet stream. Once identified, verified and timed in the sheath flow, each event is independently tagged upon separation from the flow by an electrical charge of +60, +120, or +180 volts and passed through oppositely charged deflection plates with ground planes to yield a focused six way deflection of at least six events in a narrow plane. 8 figs.

  5. Multiple sort flow cytometer

    DOE Patents [OSTI]

    Van den Engh, Ger (Seattle, WA); Esposito, Richard J. (Seattle, WA)

    1996-01-01

    A flow cytometer utilizes multiple lasers for excitation and respective fluorescence of identified dyes bonded to specific cells or events to identify and verify multiple events to be sorted from a sheath flow and droplet stream. Once identified, verified and timed in the sheath flow, each event is independently tagged upon separation from the flow by an electrical charge of +60, +120, or +180 volts and passed through oppositely charged deflection plates with ground planes to yield a focused six way deflection of at least six events in a narrow plane.

  6. Business rule enforcement via natural language modeling

    SciTech Connect (OSTI)

    Sharp, J.

    1997-11-01

    This report contains viewgraphs on business rule enforcement by natural language modeling procedures. A number of examples are given.

  7. QA Standard Contract Language | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standard Contract Language QA Standard Contract Language The success of the Office of Environmental Management (EM) depends upon the extent of its products and services to satisfy customer requirements and expectations. QA Standard Contract Language (171.28 KB) More Documents & Publications Requirements Flowdown and Graded Approach to QA Focus Group Meeting (Topical Meeting) Balanced Scorecard Program

  8. Guidance on Alternative Contract Language Regarding Energy Savings...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    on Alternative Contract Language Regarding Energy Savings Performance Contract Terminations and Cancellations Guidance on Alternative Contract Language Regarding Energy Savings ...

  9. Multiple gap photovoltaic device

    DOE Patents [OSTI]

    Dalal, Vikram L.

    1981-01-01

    A multiple gap photovoltaic device having a transparent electrical contact adjacent a first cell which in turn is adjacent a second cell on an opaque electrical contact, includes utilizing an amorphous semiconductor as the first cell and a crystalline semiconductor as the second cell.

  10. Portable multiplicity counter

    DOE Patents [OSTI]

    Newell, Matthew R.; Jones, David Carl

    2009-09-01

    A portable multiplicity counter has signal input circuitry, processing circuitry and a user/computer interface disposed in a housing. The processing circuitry, which can comprise a microcontroller integrated circuit operably coupled to shift register circuitry implemented in a field programmable gate array, is configured to be operable via the user/computer interface to count input signal pluses receivable at said signal input circuitry and record time correlations thereof in a total counting mode, coincidence counting mode and/or a multiplicity counting mode. The user/computer interface can be for example an LCD display/keypad and/or a USB interface. The counter can include a battery pack for powering the counter and low/high voltage power supplies for biasing external detectors so that the counter can be configured as a hand-held device for counting neutron events.

  11. Multiple capillary biochemical analyzer

    DOE Patents [OSTI]

    Dovichi, Norman J.; Zhang, Jian Z.

    1995-01-01

    A multiple capillary analyzer allows detection of light from multiple capillaries with a reduced number of interfaces through which light must pass in detecting light emitted from a sample being analyzed, using a modified sheath flow cuvette. A linear or rectangular array of capillaries is introduced into a rectangular flow chamber. Sheath fluid draws individual sample streams through the cuvette. The capillaries are closely and evenly spaced and held by a transparent retainer in a fixed position in relation to an optical detection system. Collimated sample excitation radiation is applied simultaneously across the ends of the capillaries in the retainer. Light emitted from the excited sample is detected by the optical detection system. The retainer is provided by a transparent chamber having inward slanting end walls. The capillaries are wedged into the chamber. One sideways dimension of the chamber is equal to the diameter of the capillaries and one end to end dimension varies from, at the top of the chamber, slightly greater than the sum of the diameters of the capillaries to, at the bottom of the chamber, slightly smaller than the sum of the diameters of the capillaries. The optical system utilizes optic fibres to deliver light to individual photodetectors, one for each capillary tube. A filter or wavelength division demultiplexer may be used for isolating fluorescence at particular bands.

  12. Multiple capillary biochemical analyzer

    DOE Patents [OSTI]

    Dovichi, N.J.; Zhang, J.Z.

    1995-08-08

    A multiple capillary analyzer allows detection of light from multiple capillaries with a reduced number of interfaces through which light must pass in detecting light emitted from a sample being analyzed, using a modified sheath flow cuvette. A linear or rectangular array of capillaries is introduced into a rectangular flow chamber. Sheath fluid draws individual sample streams through the cuvette. The capillaries are closely and evenly spaced and held by a transparent retainer in a fixed position in relation to an optical detection system. Collimated sample excitation radiation is applied simultaneously across the ends of the capillaries in the retainer. Light emitted from the excited sample is detected by the optical detection system. The retainer is provided by a transparent chamber having inward slanting end walls. The capillaries are wedged into the chamber. One sideways dimension of the chamber is equal to the diameter of the capillaries and one end to end dimension varies from, at the top of the chamber, slightly greater than the sum of the diameters of the capillaries to, at the bottom of the chamber, slightly smaller than the sum of the diameters of the capillaries. The optical system utilizes optic fibers to deliver light to individual photodetectors, one for each capillary tube. A filter or wavelength division demultiplexer may be used for isolating fluorescence at particular bands. 21 figs.

  13. Language Impact on Vectorization - Fortran

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Language Impact on Vectorization: Vector Programming in Fortran ISC15 Workshop for Intel® Xeon Phi(tm) Processors wende@zib.de ISC15 Workshop for Intel® Xeon Phi(tm) Processors 1/7 ISC 2015 Synopsis SIMD parallelism is one key mechanism to be addressed when writing code for modern multi- and manycore processors How SIMD-friendly is my code? How to adapt and modernize? How to avoid compiler specific modifications? Performance? autovectorizer vs. explicit vector programming (compiler directives)

  14. Language Classification using N-grams Accelerated by FPGA-based Bloom Filters

    SciTech Connect (OSTI)

    Jacob, A; Gokhale, M

    2007-09-13

    N-Gram (n-character sequences in text documents) counting is a well-established technique used in classifying the language of text in a document. In this paper, n-gram processing is accelerated through the use of reconfigurable hardware on the XtremeData XD1000 system. Our design employs parallelism at multiple levels, with parallel Bloom Filters accessing on-chip RAM, parallel language classifiers, and parallel document processing. In contrast to another hardware implementation (HAIL algorithm) that uses off-chip SRAM for lookup, our highly scalable implementation uses only on-chip memory blocks. Our implementation of end-to-end language classification runs at 85x comparable software and 1.45x the competing hardware design.

  15. MULTIPLE SPARK GAP SWITCH

    DOE Patents [OSTI]

    Schofield, A.E.

    1958-07-22

    A multiple spark gap switch of unique construction is described which will permit controlled, simultaneous discharge of several capacitors into a load. The switch construction includes a disc electrode with a plurality of protuberances of generally convex shape on one surface. A firing electrode is insulatingly supponted In each of the electrode protuberances and extends substantially to the apex thereof. Individual electrodes are disposed on an insulating plate parallel with the disc electrode to form a number of spark gaps with the protuberances. These electrodes are each connected to a separate charged capacitor and when a voltage ls applied simultaneously between the trigger electrodes and the dlsc electrode, each spark gap fires to connect its capacitor to the disc electrode and a subsequent load.

  16. Multiple layer insulation cover

    DOE Patents [OSTI]

    Farrell, James J.; Donohoe, Anthony J.

    1981-11-03

    A multiple layer insulation cover for preventing heat loss in, for example, a greenhouse, is disclosed. The cover is comprised of spaced layers of thin foil covered fabric separated from each other by air spaces. The spacing is accomplished by the inflation of spaced air bladders which are integrally formed in the cover and to which the layers of the cover are secured. The bladders are inflated after the cover has been deployed in its intended use to separate the layers of the foil material. The sizes of the material layers are selected to compensate for sagging across the width of the cover so that the desired spacing is uniformly maintained when the cover has been deployed. The bladders are deflated as the cover is stored thereby expediting the storage process and reducing the amount of storage space required.

  17. Multiple-port valve

    DOE Patents [OSTI]

    Doody, Thomas J.

    1978-08-22

    A multiple-port valve assembly is designed to direct flow from a primary conduit into any one of a plurality of secondary conduits as well as to direct a reverse flow. The valve includes two mating hemispherical sockets that rotatably receive a spherical valve plug. The valve plug is attached to the primary conduit and includes diverging passageways from that conduit to a plurality of ports. Each of the ports is alignable wih one or more of a plurality of secondary conduits fitted into one of the hemispherical sockets. The other hemispherical socket includes a slot for the primary conduit such that the conduit's motion along that slot with rotation of the spherical plug about various axes will position the valve-plug ports in respect to the secondary conduits.

  18. Multi-language Struct Support in Babel

    SciTech Connect (OSTI)

    Ebner, D; Prantl, A; Epperly, T W

    2011-03-22

    Babel is an open-source language interoperability framework tailored to the needs of high-performance scientific computing. As an integral element of the Common Component Architecture (CCA) it is used in a wide range of research projects. In this paper we describe how we extended Babel to support interoperable tuple data types (structs). Structs are a common idiom in scientific APIs; they are an efficient way to pass tuples of nonuniform data between functions, and are supported natively by most programming languages. Using our extended version of Babel, developers of scientific code can now pass structs as arguments between functions implemented in any of the supported languages. In C, C++ and Fortran 2003, structs can be passed without the overhead of data marshaling or copying, providing language interoperability at minimal cost. Other supported languages are Fortran 77, Fortran 90, Java and Python. We will show how we designed a struct implementation that is interoperable with all of the supported languages and present benchmark data compare the performance of all language bindings, highlighting the differences between languages that offer native struct support and an object-oriented interface with getter/setter methods.

  19. Multiple stage railgun

    DOE Patents [OSTI]

    Hawke, Ronald S.; Scudder, Jonathan K.; Aaland, Kristian

    1982-01-01

    A multiple stage magnetic railgun accelerator (10) for accelerating a projectile (15) by movement of a plasma arc (13) along the rails (11,12). The railgun (10) is divided into a plurality of successive rail stages (10a-n) which are sequentially energized by separate energy sources (14a-n) as the projectile (15) moves through the bore (17) of the railgun (10). Propagation of energy from an energized rail stage back towards the breech end (29) of the railgun (10) can be prevented by connection of the energy sources (14a-n) to the rails (11,12) through isolation diodes (34a-n). Propagation of energy from an energized rail stage back towards the breech end of the railgun can also be prevented by dividing the rails (11,12) into electrically isolated rail sections (11a-n, 12a-n). In such case means (55a-n) are used to extinguish the arc at the end of each energized stage and a fuse (31) or laser device (61) is used to initiate a new plasma arc in the next energized rail stage.

  20. MULTIPLE SHAFT TOOL HEAD

    DOE Patents [OSTI]

    Colbert, H.P.

    1962-10-23

    An improved tool head arrangement is designed for the automatic expanding of a plurality of ferruled tubes simultaneously. A plurality of output shafts of a multiple spindle drill head are driven in unison by a hydraulic motor. A plurality of tube expanders are respectively coupled to the shafts through individual power train arrangements. The axial or thrust force required for the rolling operation is provided by a double acting hydraulic cylinder having a hollow through shaft with the shaft cooperating with an internally rotatable splined shaft slidably coupled to a coupling rigidly attached to the respectlve output shaft of the drill head, thereby transmitting rotary motion and axial thrust simultaneously to the tube expander. A hydraulic power unit supplies power to each of the double acting cylinders through respective two-position, four-way valves, under control of respective solenoids for each of the cylinders. The solenoids are in turn selectively controlled by a tool selection control unit which in turn is controlled by signals received from a programmed, coded tape from a tape reader. The number of expanders that are extended in a rolling operation, which may be up to 42 expanders, is determined by a predetermined program of operations depending upon the arrangement of the ferruled tubes to be expanded in the tube bundle. The tape reader also supplies dimensional information to a machine tool servo control unit for imparting selected, horizontal and/or vertical movement to the tool head assembly. (AEC)

  1. A Fast Dynamic Language for Technical Computing Stefan Karpinski...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fast Dynamic Language for Technical Computing Stefan Karpinski, Jeff Bezanson, Viral B. Shah & Alan Edelman u a l j i Two Language Problem People love dynamic environments for...

  2. Sigmund and WInterbon Multiple Scattering

    Energy Science and Technology Software Center (OSTI)

    1985-03-01

    SWIMS calculates the angular dispersion of ion beams that undergo small-angle, incoherent multiple scattering by gaseous or solid media.

  3. Remote multiple string well completion

    SciTech Connect (OSTI)

    Kirkland, K.G.

    1981-04-21

    Method and apparatus for multiple string well completions by remote operations in underwater installations, by which the tubing strings are installed independently rather than simultaneously.

  4. Constructing Hardware in a Scale Embedded Language

    Energy Science and Technology Software Center (OSTI)

    2014-08-21

    Chisel is a new open-source hardware construction language developed at UC Berkeley that supports advanced hardware design using highly parameterized generators and layered domain-specific hardware languages. Chisel is embedded in the Scala programming language, which raises the level of hardware design abstraction by providing concepts including object orientation, functional programming, parameterized types, and type inference. From the same source, Chisel can generate a high-speed C++-based cycle-accurate software simulator, or low-level Verilog designed to pass onmore » to standard ASIC or FPGA tools for synthesis and place and route.« less

  5. UPC Language Specifications V1.2

    SciTech Connect (OSTI)

    UPC Consortium

    2005-05-31

    UPC is an explicitly parallel extension to the ISO C 99Standard. UPC follows the partitioned global address space programming model. This document is the formal specification for the UPC language syntax and semantics.

  6. Cybersecurity Procurement Language for Energy Delivery Systems

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cybersecurity Procurement Language for Energy Delivery Systems April 2014 Energy Sector Control Systems Working Group (ESCSWG) i For Questions or Comments Energy sector asset owners, operators, and suppliers are encouraged to provide feedback on this document to enhance the cybersecurity procurement language for future versions. Please send questions or comments to es-pl@energetics.com. Acknowledgements This document was prepared by the Energy Sector Control Systems Working Group (ESCSWG),

  7. A common language for computer security incidents

    SciTech Connect (OSTI)

    John D. Howard; Thomas A Longstaff

    1998-10-01

    Much of the computer security information regularly gathered and disseminated by individuals and organizations cannot currently be combined or compared because a common language has yet to emerge in the field of computer security. A common language consists of terms and taxonomies (principles of classification) which enable the gathering, exchange and comparison of information. This paper presents the results of a project to develop such a common language for computer security incidents. This project results from cooperation between the Security and Networking Research Group at the Sandia National Laboratories, Livermore, CA, and the CERT{reg_sign} Coordination Center at Carnegie Mellon University, Pittsburgh, PA. This Common Language Project was not an effort to develop a comprehensive dictionary of terms used in the field of computer security. Instead, the authors developed a minimum set of high-level terms, along with a structure indicating their relationship (a taxonomy), which can be used to classify and understand computer security incident information. They hope these high-level terms and their structure will gain wide acceptance, be useful, and most importantly, enable the exchange and comparison of computer security incident information. They anticipate, however, that individuals and organizations will continue to use their own terms, which may be more specific both in meaning and use. They designed the common language to enable these lower-level terms to be classified within the common language structure.

  8. Multiple Motivations Institutional Change Principle

    Office of Energy Efficiency and Renewable Energy (EERE)

    The multiple motivations principle suggests that a portfolio approach—rather than a single strategy—may be required to achieve change. Research demonstrates that people and institutions adopt new...

  9. V-092: Pidgin Multiple Vulnerabilities

    Broader source: Energy.gov [DOE]

    Multiple vulnerabilities have been reported in Pidgin, which can be exploited by malicious people to manipulate certain data, cause a DoS (Denial of Service), and compromise a user's system.

  10. Exploring HPCS Languages in Scientific Computing

    SciTech Connect (OSTI)

    Barrett, Richard F; Alam, Sadaf R; de Almeida, Valmor F; Bernholdt, David E; Elwasif, Wael R; Kuehn, Jeffery A; Poole, Stephen W; Shet, Aniruddha G

    2008-01-01

    As computers scale up dramatically to tens and hundreds of thousands of cores, develop deeper computational and memory hierarchies, and increased heterogeneity, developers of scientific software are increasingly challenged to express complex parallel simulations effectively and efficiently. In this paper, we explore the three languages developed under the DARPA High-Productivity Computing Systems (HPCS) program to help address these concerns: Chapel, Fortress, and X10. These languages provide a variety of features not found in currently popular HPC programming environments and make it easier to express powerful computational constructs, leading to new ways of thinking about parallel programming. Though the languages and their implementations are not yet mature enough for a comprehensive evaluation, we discuss some of the important features, and provide examples of how they can be used in scientific computing. We believe that these characteristics will be important to the future of high-performance scientific computing, whether the ultimate language of choice is one of the HPCS languages or something else.

  11. Multiple resonant railgun power supply

    DOE Patents [OSTI]

    Honig, E.M.; Nunnally, W.C.

    1985-06-19

    A multiple repetitive resonant railgun power supply provides energy for repetitively propelling projectiles from a pair of parallel rails. A plurality of serially connected paired parallel rails are powered by similar power supplies. Each supply comprises an energy storage capacitor, a storage inductor to form a resonant circuit with the energy storage capacitor and a magnetic switch to transfer energy between the resonant circuit and the pair of parallel rails for the propelling of projectiles. The multiple serial operation permits relatively small energy components to deliver overall relatively large amounts of energy to the projectiles being propelled.

  12. Multiple resonant railgun power supply

    DOE Patents [OSTI]

    Honig, Emanuel M. (Los Alamos, NM); Nunnally, William C. (Los Alamos, NM)

    1988-01-01

    A multiple repetitive resonant railgun power supply provides energy for repetitively propelling projectiles from a pair of parallel rails. A plurality of serially connected paired parallel rails are powered by similar power supplies. Each supply comprises an energy storage capacitor, a storage inductor to form a resonant circuit with the energy storage capacitor and a magnetic switch to transfer energy between the resonant circuit and the pair of parallel rails for the propelling of projectiles. The multiple serial operation permits relatively small energy components to deliver overall relatively large amounts of energy to the projectiles being propelled.

  13. CRITICAL INFRASTRUCTURE PROTECTION Multiple Efforts to Secure...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Multiple Efforts to Secure Control Systems Are Under Way, but Challenges Remain CRITICAL INFRASTRUCTURE PROTECTION Multiple Efforts to Secure Control Systems Are Under Way, but ...

  14. SolarBridge Technologies: Helping Solar Modules Speak the Language...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SolarBridge Technologies: Helping Solar Modules Speak the Language of the Energy Grid SolarBridge Technologies: Helping Solar Modules Speak the Language of the Energy Grid June 5, ...

  15. Remote multiple string well completion

    SciTech Connect (OSTI)

    Kirkland, K.G.

    1981-09-15

    In a remotely installed underwater well apparatus, a tubular body, typically a multiple string tubing hanger, is landed in a position oriented rotationally with respect to a reference point on the apparatus and a seal device is then energized by the same tool employed to land and orient the tubular body.

  16. Multiple pass laser amplifier system

    DOE Patents [OSTI]

    Brueckner, Keith A.; Jorna, Siebe; Moncur, N. Kent

    1977-01-01

    A laser amplification method for increasing the energy extraction efficiency from laser amplifiers while reducing the energy flux that passes through a flux limited system which includes apparatus for decomposing a linearly polarized light beam into multiple components, passing the components through an amplifier in delayed time sequence and recombining the amplified components into an in phase linearly polarized beam.

  17. BEDES: Creating A Common Data Language for Building Energy Performance |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy BEDES: Creating A Common Data Language for Building Energy Performance BEDES: Creating A Common Data Language for Building Energy Performance October 15, 2015 - 8:20am Addthis At its core, BEDES is a universal dictionary for the language of data. BEDES provides a standardized set of common terms and definitions that different repositories of building energy performance data can align to. At its core, BEDES is a universal dictionary for the language of data. BEDES

  18. Recommendation 186: Option Periods in Prime Contract Language

    Broader source: Energy.gov [DOE]

    The inclusion of option periods in the language of all future DOE Request for Proposals for prime contracts when appropriate.

  19. Contract Language for Energy-Consuming Product Purchases | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Products & Technologies » Energy-Efficient Products » Contract Language for Energy-Consuming Product Purchases Contract Language for Energy-Consuming Product Purchases Federal agencies are required to use specific contract language when purchasing energy-consuming products that are qualified by ENERGY STAR or designated by the Federal Energy Management Program (FEMP). See energy-efficient product purchasing requirements. Federal Acquisition Regulation Contract Language Federal

  20. Multiple Exciton Generation Solar Cells

    SciTech Connect (OSTI)

    Luther, J. M.; Semonin, O. E.; Beard, M. C.; Gao, J.; Nozik, A. J.

    2012-01-01

    Heat loss is the major factor limiting traditional single junction solar cells to a theoretical efficiency of 32%. Multiple Exciton Generation (MEG) enables efficient use of the solar spectrum yielding a theoretical power conversion efficiency of 44% in solar cells under 1-sun conditions. Quantum-confined semiconductors have demonstrated the ability to generate multiple carriers but present-day materials deliver efficiencies far below the SQ limit of 32%. Semiconductor quantum dots of PbSe and PbS provide an active testbed for developing high-efficiency, inexpensive solar cells benefitting from quantum confinement effects. Here, we will present recent work of solar cells employing MEG to yield external quantum efficiencies exceeding 100%.

  1. Posters Radiation Singularities, Multiple Scattering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 Posters Radiation Singularities, Multiple Scattering and Diffusion in Multifractal Clouds P. Silas, G. Brösamlen, and S. Lovejoy Department of Physics McGill University Montreal, Quebec, Canada C. Naud and D. Schertzer Université Pierre and Marie Curie Paris, France B. Watson Department of Physics St. Lawrence University Canton, New York Diffusion on One-Dimensional Multifractals (P. Silas, S. Lovejoy, D. Schertzer) Many geophysical and atmospheric fields exhibit multifractal characteristics

  2. Multiple target laser ablation system

    DOE Patents [OSTI]

    Mashburn, D.N.

    1996-01-09

    A laser ablation apparatus and method are provided in which multiple targets consisting of material to be ablated are mounted on a movable support. The material transfer rate is determined for each target material, and these rates are stored in a controller. A position detector determines which target material is in a position to be ablated, and then the controller controls the beam trigger timing and energy level to achieve a desired proportion of each constituent material in the resulting film. 3 figs.

  3. Multiple target laser ablation system

    DOE Patents [OSTI]

    Mashburn, Douglas N.

    1996-01-01

    A laser ablation apparatus and method are provided in which multiple targets consisting of material to be ablated are mounted on a movable support. The material transfer rate is determined for each target material, and these rates are stored in a controller. A position detector determines which target material is in a position to be ablated, and then the controller controls the beam trigger timing and energy level to achieve a desired proportion of each constituent material in the resulting film.

  4. CHARGED PARTICLE MULTIPLICITIES AT BRAHMS.

    SciTech Connect (OSTI)

    DEBBE, R., FOR THE BRAHMS COLLABORATION

    2001-07-30

    This report presents the measurement of charged particle multiplicity densities dN/d{eta} in ultrarelativistic heavy ion collisions as function of {eta} and the centrality of the collisions. This distributions were extracted from data collected by the BRAHMS collaboration during the first RHK run with gold ions at {radical}s{sub NN} = 130A {center_dot} GeV. The analysis method is described and, results are compared to some model predictions.

  5. V-161: IBM Maximo Asset Management Products Java Multiple Vulnerabilit...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Articles U-179: IBM Java 7 Multiple Vulnerabilities V-145: IBM Tivoli Federated Identity Manager Products Java Multiple Vulnerabilities V-094: IBM Multiple Products Multiple...

  6. Equation-based languages – A new paradigm for building energy modeling, simulation and optimization

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wetter, Michael; Bonvini, Marco; Nouidui, Thierry S.

    2016-04-01

    Most of the state-of-the-art building simulation programs implement models in imperative programming languages. This complicates modeling and excludes the use of certain efficient methods for simulation and optimization. In contrast, equation-based modeling languages declare relations among variables, thereby allowing the use of computer algebra to enable much simpler schematic modeling and to generate efficient code for simulation and optimization. We contrast the two approaches in this paper. We explain how such manipulations support new use cases. In the first of two examples, we couple models of the electrical grid, multiple buildings, HVAC systems and controllers to test a controller thatmore » adjusts building room temperatures and PV inverter reactive power to maintain power quality. In the second example, we contrast the computing time for solving an optimal control problem for a room-level model predictive controller with and without symbolic manipulations. As a result, exploiting the equation-based language led to 2, 200 times faster solution« less

  7. Programmability of the HPCS Languages: A Case Study with a Quantum Chemistry Kernel (Extended Version)

    SciTech Connect (OSTI)

    Shet, Aniruddha G; Elwasif, Wael R; Harrison, Robert J; Bernholdt, David E

    2008-04-01

    As high-end computer systems present users with rapidly increasing numbers of processors, possibly also incorporating attached co-processors, programmers are increasingly challenged to express the necessary levels of concurrency with the dominant parallel programming model, Fortran+MPI+OpenMP (or minor variations). In this paper, we examine the languages developed under the DARPA High-Productivity Computing Systems (HPCS) program (Chapel, Fortress, and X10) as representatives of a different parallel programming model which might be more effective on coming high-performance systems. The application used in this study is the Hartree-Fock method from quantum chemistry, which combines access to distributed data with a task-parallel algorithm and is characterized by significant irregularity in the computational tasks. We present several different implementation strategies for load balancing of the task parallel computation, as well as distributed array operations, in each of the three languages. We conclude that the HPCS languages provide a wide variety of mechanisms for expressing parallelism, which can be combined at multiple levels, making them quite expressive for this problem.

  8. Programmability of the HPCS Languages: A Case Study with a Quantum Chemistry Kernel

    SciTech Connect (OSTI)

    Shet, Aniruddha G; Elwasif, Wael R; Harrison, Robert J; Bernholdt, David E

    2008-01-01

    As high-end computer systems present users with rapidly increasing numbers of processors, possibly also incorporating attached co-processors, programmers are increasingly challenged to express the necessary levels of concurrency with the dominant parallel programming model, Fortran+MPI+OpenMP (or minor variations). In this paper, we examine the languages developed under the DARPA High-Productivity Computing Systems (HPCS) program (Chapel, Fortress, and X10) as representatives of a different parallel programming model which might be more effective on coming high-performance systems. The application used in this study is the Hartree-Fock method from quantum chemistry, which combines access to distributed data with a task-parallel algorithm and is characterized by significant irregularity in the computational tasks. We present several different implementation strategies for load balancing of the task parallel computation, as well as distributed array operations, in each of the three languages. We conclude that the HPCS languages provide a wide variety of mechanisms for expressing parallelism, which can be combined at multiple levels, making them quite expressive for this problem.

  9. Multiple channel programmable coincidence counter

    DOE Patents [OSTI]

    Arnone, Gaetano J.

    1990-01-01

    A programmable digital coincidence counter having multiple channels and featuring minimal dead time. Neutron detectors supply electrical pulses to a synchronizing circuit which in turn inputs derandomized pulses to an adding circuit. A random access memory circuit connected as a programmable length shift register receives and shifts the sum of the pulses, and outputs to a serializer. A counter is input by the adding circuit and downcounted by the seralizer, one pulse at a time. The decoded contents of the counter after each decrement is output to scalers.

  10. Recirculation in multiple wave conversions

    SciTech Connect (OSTI)

    Kaufman, A. N.; Brizard, A.J.; Kaufman, A.N.; Tracy, E.R.

    2008-07-30

    A one-dimensional multiple wave-conversion model is constructed that allows energy recirculation in ray phase space. Using a modular eikonal approach, the connection coefficients for this model are calculated by ray phase-space methods. Analytical results (confirmed numerically) show that all connection coefficients exhibit interference effects that depend on an interference phase, calculated from the coupling constants and the area enclosed by the intersecting rays. This conceptual model, which focuses on the topology of intersecting rays in phase space, is used to investigate how mode conversion between primary and secondary waves is modified by the presence of a tertiary wave.

  11. Multiple piece turbine rotor blade

    SciTech Connect (OSTI)

    Jones, Russell B; Fedock, John A

    2013-05-21

    A multiple piece turbine rotor blade with a shell having an airfoil shape and secured between a spar and a platform with the spar including a tip end piece. a snap ring fits around the spar and abuts against the spar tip end piece on a top side and abuts against a shell on the bottom side so that the centrifugal loads from the shell is passed through the snap ring and into the spar and not through a tip cap dovetail slot and projection structure.

  12. Universality of Charged Multiplicity Distributions

    SciTech Connect (OSTI)

    Goulianos, K.; /Rockefeller U.

    1981-12-01

    The charged multiplicity distributions of the diffractive and non-diffractive components of hadronic interactions, as well as those of hadronic states produced in other reactions, are described well by a universal Gaussian function that depends only on the available mass for pionization, has a maximum at n{sub o} {approx_equal} 2M{sup 1/2}, where M is the available mass in GeV, and a peak to width ratio n{sub o}/D {approx_equal} 2.

  13. Multiple station thermal diffusivity instrument

    SciTech Connect (OSTI)

    Wang, H.; Dinwiddie, R.B.; Gaal, P.S.

    1995-12-31

    A multiple furnace laser flash thermal diffusivity system has been developed. The system is equipped with a movable Nd:Glass laser unit, two IR detectors and furnaces for precise measurements of thermal diffusivity over the temperature range from {minus}150{degree}C to 2500{degree}C. All furnaces can operate in vacuum and inert gas; the environmental effects furnace also supports oxidizing and reducing environments. To increase testing speed the graphite and aluminum furnaces are both equipped with six-sample carousels. Thermal diffusivity measurements of three standard reference materials show excellent results over the entire temperature range.

  14. Multiple protocol fluorometer and method

    DOE Patents [OSTI]

    Kolber, Zbigniew S.; Falkowski, Paul G.

    2000-09-19

    A multiple protocol fluorometer measures photosynthetic parameters of phytoplankton and higher plants using actively stimulated fluorescence protocols. The measured parameters include spectrally-resolved functional and optical absorption cross sections of PSII, extent of energy transfer between reaction centers of PSII, F.sub.0 (minimal), F.sub.m (maximal) and F.sub.v (variable) components of PSII fluorescence, photochemical and non-photochemical quenching, size of the plastoquinone (PQ) pool, and the kinetics of electron transport between Q.sub.a and PQ pool and between PQ pool and PSI. The multiple protocol fluorometer, in one embodiment, is equipped with an excitation source having a controlled spectral output range between 420 nm and 555 nm and capable of generating flashlets having a duration of 0.125-32 .mu.s, an interval between 0.5 .mu.s and 2 seconds, and peak optical power of up to 2 W/cm.sup.2. The excitation source is also capable of generating, simultaneous with the flashlets, a controlled continuous, background illumination.

  15. Multiple channel data acquisition system

    DOE Patents [OSTI]

    Crawley, H. Bert; Rosenberg, Eli I.; Meyer, W. Thomas; Gorbics, Mark S.; Thomas, William D.; McKay, Roy L.; Homer, Jr., John F.

    1990-05-22

    A multiple channel data acquisition system for the transfer of large amounts of data from a multiplicity of data channels has a plurality of modules which operate in parallel to convert analog signals to digital data and transfer that data to a communications host via a FASTBUS. Each module has a plurality of submodules which include a front end buffer (FEB) connected to input circuitry having an analog to digital converter with cache memory for each of a plurality of channels. The submodules are interfaced with the FASTBUS via a FASTBUS coupler which controls a module bus and a module memory. The system is triggered to effect rapid parallel data samplings which are stored to the cache memories. The cache memories are uploaded to the FEBs during which zero suppression occurs. The data in the FEBs is reformatted and compressed by a local processor during transfer to the module memory. The FASTBUS coupler is used by the communications host to upload the compressed and formatted data from the module memory. The local processor executes programs which are downloaded to the module memory through the FASTBUS coupler.

  16. Multiple channel data acquisition system

    DOE Patents [OSTI]

    Crawley, H.B.; Rosenberg, E.I.; Meyer, W.T.; Gorbics, M.S.; Thomas, W.D.; McKay, R.L.; Homer, J.F. Jr.

    1990-05-22

    A multiple channel data acquisition system for the transfer of large amounts of data from a multiplicity of data channels has a plurality of modules which operate in parallel to convert analog signals to digital data and transfer that data to a communications host via a FASTBUS. Each module has a plurality of submodules which include a front end buffer (FEB) connected to input circuitry having an analog to digital converter with cache memory for each of a plurality of channels. The submodules are interfaced with the FASTBUS via a FASTBUS coupler which controls a module bus and a module memory. The system is triggered to effect rapid parallel data samplings which are stored to the cache memories. The cache memories are uploaded to the FEBs during which zero suppression occurs. The data in the FEBs is reformatted and compressed by a local processor during transfer to the module memory. The FASTBUS coupler is used by the communications host to upload the compressed and formatted data from the module memory. The local processor executes programs which are downloaded to the module memory through the FASTBUS coupler. 25 figs.

  17. U-169: Sympa Multiple Security Bypass Vulnerabilities

    Broader source: Energy.gov [DOE]

    Multiple vulnerabilities have been reported in Sympa, which can be exploited by malicious people to bypass certain security restrictions.

  18. Multiple soil nutrient competition between plants, microbes,...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Multiple soil nutrient competition between plants, microbes, and mineral surfaces: model development, parameterization, and example applications in several...

  19. Hereditary Multiple Exostoses with Pseudoaneurysm

    SciTech Connect (OSTI)

    Al-Hadidy, Azmy M. Al-Smady, Moa'ath M.; Haroun, Azmi A.; Hamamy, Hanan A.; Ghoul, Suha M.; Shennak, Akram O.

    2007-06-15

    A 16-year-old male patient with hereditary multiple exostoses (HME) was found to have a pseudoaneurysm of the left popliteal artery caused by osteochondroma in the lower femur. The diagnosis was confirmed by ultrasound, magnetic resonance imaging and magnetic resonance angiography without the need to perform an angiogram. The osteochondroma was excised and the popliteal artery was repaired with a saphenous graft. Vascular complications are extremely rare in HME, pseudoaneurysm being the most common and mostly located in the popliteal artery. This complication should be considered in young HME patients with a mass at the knee region. The radiological spectrum of investigations allows the diagnosis of this complication with proper and less invasive management procedures for the patient.

  20. Multiple-stage integrating accelerometer

    DOE Patents [OSTI]

    Devaney, Howard F.

    1986-01-01

    An accelerometer assembly is provided for use in activating a switch in response to multiple acceleration pulses in series. The accelerometer includes a housing forming a chamber. An inertial mass or piston is slidably disposed in the chamber and spring biased toward a first or reset position. A damping system is also provided to damp piston movement in response to first and subsequent acceleration pulses. Additionally, a cam, including a Z-shaped slot, and cooperating follower pin slidably received therein are mounted to the piston and the housing. The middle or cross-over leg of the Z-shaped slot cooperates with the follower pin to block or limit piston movement and prevent switch activation in response to a lone acceleration pulse. The switch of the assembly is only activated after two or more separate acceleration pulses are sensed and the piston reaches the end of the chamber opposite the reset position.

  1. Multiple-stage integrating accelerometer

    DOE Patents [OSTI]

    Devaney, H.F.

    1984-06-27

    An accelerometer assembly is provided for use in activating a switch in response to multiple acceleration pulses in series. The accelerometer includes a housing forming a chamber. An inertial mass or piston is slidably disposed in the chamber and spring biased toward a first or reset position. A damping system is also provided to damp piston movement in response to first and subsequent acceleration pulses. Additionally, a cam, including a Z-shaped slot, and cooperating follower pin slidably received therein are mounted to the piston and the housing. The middle or cross-over leg of the Z-shaped slot cooperates with the follower pin to block or limit piston movement and prevent switch activation in response to a lone acceleration pulse. The switch of the assembly is only activated after two or more separate acceleration pulses are sensed and the piston reaches the end of the chamber opposite the reset position.

  2. Guidance on Alternative Contract Language Regarding Energy Savings

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Performance Contract Terminations and Cancellations | Department of Energy on Alternative Contract Language Regarding Energy Savings Performance Contract Terminations and Cancellations Guidance on Alternative Contract Language Regarding Energy Savings Performance Contract Terminations and Cancellations This guidance relates to alternative task order language which could be used to identify, at the time of task order award, certain costs that would normally form the basis of a claim following

  3. plain-language-compliance-report-2016 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    plain-language-compliance-report-2016 plain-language-compliance-report-2016 The Department of Energy sees the implementation of the Plain Writing Act as an important initiative that helps the Department share relevant information in a way that is clear, concise, and informative. The areas referenced in this report are only a few of the successes we have encountered as we continue to implement the Act. Plain Language Compliance Report 2016.pdf (182.36 KB) More Documents & Publications Plain

  4. EM Conducts Third Annual Spanish Language Training with Record...

    Broader source: Energy.gov (indexed) [DOE]

    Fire Training Institute and the San Diego Fire Department. The third annual Spanish language program, which involves 16 hours of training, attracted 45 emergency responders from...

  5. Assessing group interaction with social language network analysis.

    SciTech Connect (OSTI)

    Pennebaker, James; Scholand, Andrew Joseph; Tausczik, Yla R.

    2010-04-01

    In this paper we discuss a new methodology, social language network analysis (SLNA), that combines tools from social language processing and network analysis to assess socially situated working relationships within a group. Specifically, SLNA aims to identify and characterize the nature of working relationships by processing artifacts generated with computer-mediated communication systems, such as instant message texts or emails. Because social language processing is able to identify psychological, social, and emotional processes that individuals are not able to fully mask, social language network analysis can clarify and highlight complex interdependencies between group members, even when these relationships are latent or unrecognized.

  6. Sample Contract Language for Construction Using Energy-Efficient...

    Broader source: Energy.gov (indexed) [DOE]

    in contracts specifying or purchasing energy-efficient products in construction projects. ... Download the Sample Contract Language for Construction. (150.69 KB) More Documents & ...

  7. Browse Societies by Language -- E-print Network Societies by...

    Office of Scientific and Technical Information (OSTI)

    If you wish to view societies in another language, please select from the following options. Chinese Dutch English French German Italian Japanese Nordic Spanish and Portuguese ...

  8. Sample Contract Language for Construction Using Energy-Efficient Products

    Broader source: Energy.gov [DOE]

    Document covers sample language that federal agencies can use in contracts specifying or purchasing energy-efficient products in construction projects.

  9. Languages and interfaces for facial animation

    SciTech Connect (OSTI)

    Magnenat-Thalmann, N.

    1995-05-01

    This paper describes high-level tools for specifying, controlling, and synchronizing temporal and spatial characteristics for 3D animation of facial expressions. The proposed approach consists of hierarchical levels of controls. Specification of expressions, phonemes, emotions, sentences, and head movements by means of a high-level language is shown. The various aspects of synchronization are also emphasized. Then, association of the control different interactive devices and media which allows the animator greater flexibility and freedom, is discussed. Experiments with input accessories such as the keyboard of a music synthesizer and gestures from the DataGlove are illustrated.

  10. Network Markup Language Base Schema version 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GFD-R-P.206 NML-WG nml-wg@ogf.org Jeroen van der Ham, UvA (editor) Freek Dijkstra, SURFsara Roman Łapacz, PSNC Jason Zurawski, Internet2 May 2013 Network Markup Language Base Schema version 1 Status of This Document Grid Final Draft (GFD), Proposed Recommendation (R-P). Copyright Notice Copyright c Open Grid Forum (2008-2013). Some Rights Reserved. Distribution is unlim- ited. Abstract This document describes a set of normative schemas which allow the description of computer network topologies.

  11. MULTIPLE-WINDOW SPECTROMETRY FOR $sup 67$Ga. (Technical Report...

    Office of Scientific and Technical Information (OSTI)

    of Publication: United States Language: English Subject: N26110* --Instrumentation--Radiation Detection Instruments-- General Detectors & Monitors; N28530 --Life...

  12. Understanding and representing natural language meaning

    SciTech Connect (OSTI)

    Waltz, D.L.; Maran, L.R.; Dorfman, M.H.; Dinitz, R.; Farwell, D.

    1982-12-01

    During this contract period the authors have: (a) continued investigation of events and actions by means of representation schemes called 'event shape diagrams'; (b) written a parsing program which selects appropriate word and sentence meanings by a parallel process known as activation and inhibition; (c) begun investigation of the point of a story or event by modeling the motivations and emotional behaviors of story characters; (d) started work on combining and translating two machine-readable dictionaries into a lexicon and knowledge base which will form an integral part of our natural language understanding programs; (e) made substantial progress toward a general model for the representation of cognitive relations by comparing English scene and event descriptions with similar descriptions in other languages; (f) constructed a general model for the representation of tense and aspect of verbs; (g) made progress toward the design of an integrated robotics system which accepts English requests, and uses visual and tactile inputs in making decisions and learning new tasks.

  13. V-224: Google Chrome Multiple Vulnerabilities | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4: Google Chrome Multiple Vulnerabilities V-224: Google Chrome Multiple Vulnerabilities August 22, 2013 - 1:05am Addthis PROBLEM: Multiple vulnerabilities have been reported in...

  14. V-121: Google Chrome Multiple Vulnerabilities | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1: Google Chrome Multiple Vulnerabilities V-121: Google Chrome Multiple Vulnerabilities March 28, 2013 - 12:29am Addthis PROBLEM: Google Chrome Multiple Vulnerabilities PLATFORM:...

  15. V-207: Wireshark Multiple Denial of Service Vulnerabilities ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7: Wireshark Multiple Denial of Service Vulnerabilities V-207: Wireshark Multiple Denial of Service Vulnerabilities July 31, 2013 - 1:59am Addthis PROBLEM: Multiple vulnerabilities...

  16. Multiple sort flow cytometer (Patent) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Multiple sort flow cytometer Citation Details In-Document Search Title: Multiple sort flow cytometer A flow cytometer utilizes multiple lasers for excitation and respective ...

  17. Multiple acousto-optic q-switch

    DOE Patents [OSTI]

    Deason, Vance A.

    1993-01-01

    An improved dynamic moire interferometer comprised of a lasing medium providing a plurality of beams of coherent light, a multiple q-switch producing multiple trains of 100,000 or more pulses per second, a combining means collimating multiple trains of pulses into substantially a single train and directing beams to specimen gratings affixed to a test material, and a controller, triggering and sequencing the emission of the pulses with the occurrence and recording of a dynamic loading event.

  18. Multiple acousto-optic q-switch

    DOE Patents [OSTI]

    Deason, Vance A.

    1993-12-07

    An improved dynamic moire interferometer comprised of a lasing medium providing a plurality of beams of coherent light, a multiple q-switch producing multiple trains of 100,000 or more pulses per second, a combining means collimating multiple trains of pulses into substantially a single train and directing beams to specimen gratings affixed to a test material, and a controller, triggering and sequencing the emission of the pulses with the occurrence and recording of a dynamic loading event.

  19. Cross-language information retrieval using PARAFAC2.

    SciTech Connect (OSTI)

    Bader, Brett William; Chew, Peter; Abdelali, Ahmed; Kolda, Tamara Gibson

    2007-05-01

    A standard approach to cross-language information retrieval (CLIR) uses Latent Semantic Analysis (LSA) in conjunction with a multilingual parallel aligned corpus. This approach has been shown to be successful in identifying similar documents across languages - or more precisely, retrieving the most similar document in one language to a query in another language. However, the approach has severe drawbacks when applied to a related task, that of clustering documents 'language-independently', so that documents about similar topics end up closest to one another in the semantic space regardless of their language. The problem is that documents are generally more similar to other documents in the same language than they are to documents in a different language, but on the same topic. As a result, when using multilingual LSA, documents will in practice cluster by language, not by topic. We propose a novel application of PARAFAC2 (which is a variant of PARAFAC, a multi-way generalization of the singular value decomposition [SVD]) to overcome this problem. Instead of forming a single multilingual term-by-document matrix which, under LSA, is subjected to SVD, we form an irregular three-way array, each slice of which is a separate term-by-document matrix for a single language in the parallel corpus. The goal is to compute an SVD for each language such that V (the matrix of right singular vectors) is the same across all languages. Effectively, PARAFAC2 imposes the constraint, not present in standard LSA, that the 'concepts' in all documents in the parallel corpus are the same regardless of language. Intuitively, this constraint makes sense, since the whole purpose of using a parallel corpus is that exactly the same concepts are expressed in the translations. We tested this approach by comparing the performance of PARAFAC2 with standard LSA in solving a particular CLIR problem. From our results, we conclude that PARAFAC2 offers a very promising alternative to LSA not only for

  20. Staged inoculation of multiple cyanobacterial photobioreactors

    DOE Patents [OSTI]

    Scott, Brendan; Meichel, George; Phillips-Kress, Jesse; Blanks, Jessica

    2015-09-01

    A method of rapid simultaneous inoculation of cyanobacteria to multiple commercial-scale closed photobioreactors for the production of a target molecule such as ethanol.

  1. Mode selectivity in multiple-beam klystrons

    SciTech Connect (OSTI)

    Nusinovich, Gregory S.; Abe, David K.

    2006-09-15

    A general method is developed for calculating the coupling coefficients of multiple beamlets of an arbitrary geometry to resonator fields having an arbitrary transverse distribution. A number of examples illustrate the effectiveness of this method for calculating coupling coefficients and show the effect of device parameters on the coupling of a given multiple electron beam to competing modes of multiple-beam klystrons (MBKs) operating in high-order modes. The method can be used for evaluating the mode selectivity and the 'monotron instability' in MBKs. It can also be used for determining the Pierce gain parameter in multiple-beam traveling-wave tubes.

  2. Operating Systems Support for Advanced Programming Languages

    SciTech Connect (OSTI)

    Kubiatowicz, John

    2012-10-29

    As machines grow in scale and complexity, techniques to make the most effective use of network, memory, and processor resources will also become increasingly important. Programming models that rely on one-sided communication or global address space support have demonstrated advantages for productivity and performance, but they are most effective when used with proper OS support. We propose to develop OS and runtime support for programming models like UPC, GA, Charm++, and HPCS languages, which rely on one-sided communication. Rather than a full OS model, we envision applications bundled with only the necessary OS functions linked in to the application in user space -- relying on the hypervisor for protaction, resource sharing, and mangagement of Quality of Service guarantees. Our services will include support for remote reads and writes to memory, along with remote active message handlers, which are essential for support of fast noncontiguous memory operations, atomic operations, and event-driven applications.

  3. Method and apparatus for multiple well completion

    SciTech Connect (OSTI)

    Lawson, J.E.

    1982-06-08

    Method and apparatus for multiple well completion, in which a multiple string tubing hanger or like component is equipped with a gapped flange to accept dependent splines on the handling tool and on the production upper body to establish precise orientation of the production upper body.

  4. Final Report A Multi-Language Environment For Programmable Code Optimization and Empirical Tuning

    SciTech Connect (OSTI)

    Yi, Qing; Whaley, Richard Clint; Qasem, Apan; Quinlan, Daniel

    2013-11-23

    This report summarizes our effort and results of building an integrated optimization environment to effectively combine the programmable control and the empirical tuning of source-to-source compiler optimizations within the framework of multiple existing languages, specifically C, C++, and Fortran. The environment contains two main components: the ROSE analysis engine, which is based on the ROSE C/C++/Fortran2003 source-to-source compiler developed by Co-PI Dr.Quinlan et. al at DOE/LLNL, and the POET transformation engine, which is based on an interpreted program transformation language developed by Dr. Yi at University of Texas at San Antonio (UTSA). The ROSE analysis engine performs advanced compiler analysis, identifies profitable code transformations, and then produces output in POET, a language designed to provide programmable control of compiler optimizations to application developers and to support the parameterization of architecture-sensitive optimizations so that their configurations can be empirically tuned later. This POET output can then be ported to different machines together with the user application, where a POET-based search engine empirically reconfigures the parameterized optimizations until satisfactory performance is found. Computational specialists can write POET scripts to directly control the optimization of their code. Application developers can interact with ROSE to obtain optimization feedback as well as provide domain-specific knowledge and high-level optimization strategies. The optimization environment is expected to support different levels of automation and programmer intervention, from fully-automated tuning to semi-automated development and to manual programmable control.

  5. PrimerDesign-M: A multiple-alignment based multiple-primer design...

    Office of Scientific and Technical Information (OSTI)

    for walking across variable genomes Prev Next Title: PrimerDesign-M: A multiple-alignment based multiple-primer design tool for walking across variable genomes You are ...

  6. PrimerDesign-M: A multiple-alignment based multiple-primer design...

    Office of Scientific and Technical Information (OSTI)

    for walking across variable genomes Prev Next Title: PrimerDesign-M: A multiple-alignment based multiple-primer design tool for walking across variable genomes Analyses of ...

  7. Specifying structural constraints of architectural patterns in the ARCHERY language

    SciTech Connect (OSTI)

    Sanchez, Alejandro; Barbosa, Luis S.; Riesco, Daniel

    2015-03-10

    ARCHERY is an architectural description language for modelling and reasoning about distributed, heterogeneous and dynamically reconfigurable systems in terms of architectural patterns. The language supports the specification of architectures and their reconfiguration. This paper introduces a language extension for precisely describing the structural design decisions that pattern instances must respect in their (re)configurations. The extension is a propositional modal logic with recursion and nominals referencing components, i.e., a hybrid µ-calculus. Its expressiveness allows specifying safety and liveness constraints, as well as paths and cycles over structures. Refinements of classic architectural patterns are specified.

  8. ZettaBricks: A Language Compiler and Runtime System for Anyscale Computing

    SciTech Connect (OSTI)

    Amarasinghe, Saman

    2015-03-27

    This grant supported the ZettaBricks and OpenTuner projects. ZettaBricks is a new implicitly parallel language and compiler where defining multiple implementations of multiple algorithms to solve a problem is the natural way of programming. ZettaBricks makes algorithmic choice a first class construct of the language. Choices are provided in a way that also allows our compiler to tune at a finer granularity. The ZettaBricks compiler autotunes programs by making both fine-grained as well as algorithmic choices. Choices also include different automatic parallelization techniques, data distributions, algorithmic parameters, transformations, and blocking. Additionally, ZettaBricks introduces novel techniques to autotune algorithms for different convergence criteria. When choosing between various direct and iterative methods, the ZettaBricks compiler is able to tune a program in such a way that delivers near-optimal efficiency for any desired level of accuracy. The compiler has the flexibility of utilizing different convergence criteria for the various components within a single algorithm, providing the user with accuracy choice alongside algorithmic choice. OpenTuner is a generalization of the experience gained in building an autotuner for ZettaBricks. OpenTuner is a new open source framework for building domain-specific multi-objective program autotuners. OpenTuner supports fully-customizable configuration representations, an extensible technique representation to allow for domain-specific techniques, and an easy to use interface for communicating with the program to be autotuned. A key capability inside OpenTuner is the use of ensembles of disparate search techniques simultaneously; techniques that perform well will dynamically be allocated a larger proportion of tests.

  9. Neutron multiplication error in TRU waste measurements

    SciTech Connect (OSTI)

    Veilleux, John [Los Alamos National Laboratory; Stanfield, Sean B [CCP; Wachter, Joe [CCP; Ceo, Bob [CCP

    2009-01-01

    Total Measurement Uncertainty (TMU) in neutron assays of transuranic waste (TRU) are comprised of several components including counting statistics, matrix and source distribution, calibration inaccuracy, background effects, and neutron multiplication error. While a minor component for low plutonium masses, neutron multiplication error is often the major contributor to the TMU for items containing more than 140 g of weapons grade plutonium. Neutron multiplication arises when neutrons from spontaneous fission and other nuclear events induce fissions in other fissile isotopes in the waste, thereby multiplying the overall coincidence neutron response in passive neutron measurements. Since passive neutron counters cannot differentiate between spontaneous and induced fission neutrons, multiplication can lead to positive bias in the measurements. Although neutron multiplication can only result in a positive bias, it has, for the purpose of mathematical simplicity, generally been treated as an error that can lead to either a positive or negative result in the TMU. While the factors that contribute to neutron multiplication include the total mass of fissile nuclides, the presence of moderating material in the matrix, the concentration and geometry of the fissile sources, and other factors; measurement uncertainty is generally determined as a function of the fissile mass in most TMU software calculations because this is the only quantity determined by the passive neutron measurement. Neutron multiplication error has a particularly pernicious consequence for TRU waste analysis because the measured Fissile Gram Equivalent (FGE) plus twice the TMU error must be less than 200 for TRU waste packaged in 55-gal drums and less than 325 for boxed waste. For this reason, large errors due to neutron multiplication can lead to increased rejections of TRU waste containers. This report will attempt to better define the error term due to neutron multiplication and arrive at values that are

  10. Model Language for Project Agreements Between DOE National Laboratories and Recipient Russian Institutes

    Broader source: Energy.gov [DOE]

    Model Language for Project Agreements Between DOE National Laboratories and Recipient Russian Institutes

  11. Closing_Language_Patent_Waiver_Grant_Cases.pdf | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    ClosingLanguagePatentWaiverGrantCases.pdf More Documents & Publications Identified Patent Waiver W(I)2009-004 Identified Patent Waiver W(I)2010-004 Advance Patent Waiver...

  12. LEARNING SEMANTICS-ENHANCED LANGUAGE MODELS APPLIED TO UNSUEPRVISED WSD

    SciTech Connect (OSTI)

    VERSPOOR, KARIN; LIN, SHOU-DE

    2007-01-29

    An N-gram language model aims at capturing statistical syntactic word order information from corpora. Although the concept of language models has been applied extensively to handle a variety of NLP problems with reasonable success, the standard model does not incorporate semantic information, and consequently limits its applicability to semantic problems such as word sense disambiguation. We propose a framework that integrates semantic information into the language model schema, allowing a system to exploit both syntactic and semantic information to address NLP problems. Furthermore, acknowledging the limited availability of semantically annotated data, we discuss how the proposed model can be learned without annotated training examples. Finally, we report on a case study showing how the semantics-enhanced language model can be applied to unsupervised word sense disambiguation with promising results.

  13. Microsoft Word - Plain Language Compliance Report 2016.doc

    Energy Savers [EERE]

    For example, visitors can enter a search term and find that information on Energy.gov; ... found most user search queries consist of terms that are simple and in Plain Language. ...

  14. New report offers best practice for transparent contract language...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Twitter Google + Vimeo Newsletter Signup SlideShare New report offers best practice for transparent contract language of PV O&M agreements HomeNews, News & Events, SolarNew ...

  15. Final Report for CORBA for Fourth Generation Language

    SciTech Connect (OSTI)

    Svetlana Shasharina

    2005-06-28

    The standard for object based networking is the Common Object Request Broker Architecture (CORBA). However, CORBA is not available for Fourth Generation Languages (4GL's) such as Visual Numerics? PV-WAVE or Research Systems? Interactive Data Language (RSI-IDL), which are widely used by scientists and engineers for data visualization and analysis. The proposed work would provide a set of tools to allow 4GL's to interoperate with CORBA.

  16. Selecting tense, aspect, and connecting words in language generation

    SciTech Connect (OSTI)

    Gaasterland, T.; Dorr, B.

    1995-12-31

    Generating language that reflects the temporal organization of represented knowledge requires a language generation model that integrates contemporary theories of tense and aspect, temporal representations, and methods to plan text. This paper presents a model that produces complex sentences that reflect temporal relations present in underlying temporal concepts. The main result of this work is the successful application of constrained linguistic theories of tense and aspect to a generator which produces meaningful event combinations and selects appropriate connecting words that relate them.

  17. Cybersecurity Procurement Language for Energy Delivery (April 2014) |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Procurement Language for Energy Delivery (April 2014) Cybersecurity Procurement Language for Energy Delivery (April 2014) Energy delivery systems, which are used to monitor and control the production, transfer, and distribution of energy, are critical to the effective and reliable operation of North America's energy infrastructure. Our twenty-first-century way of life is made possible by the vast network of processes enabled by these systems, as well as the

  18. The Swift Parallel Scripting Language for ALCF Systems | Argonne Leadership

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Computing Facility Projects bgclang Compiler Cobalt Scheduler GLEAN Petrel Swift The Swift Parallel Scripting Language for ALCF Systems Swift is an implicitly parallel functional language that makes it easier to script higher-level applications or workflows composed from serial or parallel programs. Recently made available across ALCF systems, it has been used to script application workflows in a broad range of diverse disciplines from protein structure prediction to modeling global

  19. U-104: Adobe Flash Player Multiple Vulnerabilities

    Broader source: Energy.gov [DOE]

    Multiple vulnerabilities have been reported in Adobe Flash Player, which can be exploited by malicious people to conduct cross-site scripting attacks, bypass certain security restrictions, and compromise a user's system.

  20. V-126: Mozilla Firefox Multiple Vulnerabilities

    Broader source: Energy.gov [DOE]

    Multiple vulnerabilities have been reported in Mozilla Firefox, which can be exploited by malicious, local users to gain escalated privileges and by malicious people to conduct spoofing and cross-site scripting attacks and compromise a user's system

  1. Modular multiplication operator and quantized baker's maps

    SciTech Connect (OSTI)

    Lakshminarayan, Arul [Max-Planck-Institut fuer Physik komplexer Systeme, Noethnitzer Strasse 38, D-01187 Dresden (Germany)

    2007-10-15

    The modular multiplication operator, a central subroutine in Shor's factoring algorithm, is shown to be a coherent superposition of two quantum baker's maps when the multiplier is 2. The classical limit of the maps being completely chaotic, it is shown that there exist perturbations that push the modular multiplication operator into regimes of generic quantum chaos with spectral fluctuations that are those of random matrices. For the initial state of relevance to Shor's algorithm we study fidelity decay due to phase and bit-flip errors in a single qubit and show exponential decay with shoulders at multiples or half-multiples of the order. A simple model is used to gain some understanding of this behavior.

  2. V-059: MoinMoin Multiple Vulnerabilities

    Broader source: Energy.gov [DOE]

    Multiple vulnerabilities have been reported in MoinMoin, which can be exploited by malicious users to conduct script insertion attacks and compromise a vulnerable system and by malicious people to manipulate certain data.

  3. V-097: Google Chrome Multiple Vulnerabilities

    Broader source: Energy.gov [DOE]

    Multiple vulnerabilities have been reported in Google Chrome, where some have an unknown impact and others can be exploited by malicious people to bypass certain security restrictions and compromise a user's system.

  4. Probing Radiation Damage in Plutonium Alloys with Multiple Measurement...

    Office of Scientific and Technical Information (OSTI)

    The results suggest that while the first annealing stage obeys second order chemical ... Sponsoring Org: USDOE Country of Publication: United States Language: English Subject: 75 ...

  5. Probing Radiation Damage in Plutonium Alloys with Multiple Measurement...

    Office of Scientific and Technical Information (OSTI)

    The results suggest that while the first annealing stage obeys second order chemical ... Country of Publication: United States Language: English Subject: 75 CONDENSED MATTER PHYSICS, ...

  6. Sequential Infiltration Synthesis for Enhancing Multiple Patterning

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lithography | Argonne National Laboratory Multiple Patterning Lithography Technology available for licensing: The invention is simplified methods of multiple-patterning photolithography using sequential infiltration synthesis (SIS) to modify the photoresist such that it withstands plasma etching better than unmodified resist and replaces one or more hard masks and/or a freezing step in MPL processes including litho-etch-litho-etch photolithography or litho-freeze-litho-etch photolithography.

  7. Hand-held multiple system gas chromatograph

    DOE Patents [OSTI]

    Yu, Conrad M.

    2001-01-01

    A multiple parallel hand-held gas chromatograph (GC) system which includes several independent GCs. Each independent GC has its own injector, separation column, detector and oven and the GCs are mounted in a light weight hand-held assembly. Each GC operates independently and simultaneously. Because of different coatings in different separation columns, different retention times for the same gas will be measured. Thus, for a GC system with multiple parallel GCs, the system can measure, in a short period, different retention times and provide a cross-reference in the determination of the measured gas and to become a two-dimensional system for direct field use.

  8. Active neutron multiplicity counting of bulk uranium

    SciTech Connect (OSTI)

    Ensslin, N.; Krick, M.S.; Langner, D.G.; Miller, M.C. )

    1991-01-01

    This paper describes a new nondestructive assay technique being developed to assay bulk uranium containing kilogram quantities of {sup 235}U. The new technique uses neutron multiplicity analysis of data collected with a coincidence counter outfitted with AmLi neutron sources. The authors have calculated the expected neutron multiplicity count rate and assay precision for this technique and will report on its expected performance as a function of detector design characteristics, {sup 235}U sample mass, AmLi source strength, and source-to-sample coupling.

  9. Laser isotope separation by multiple photon absorption

    DOE Patents [OSTI]

    Robinson, C. Paul; Rockwood, Stephen D.; Jensen, Reed J.; Lyman, John L.; Aldridge, III, Jack P.

    1987-01-01

    Multiple photon absorption from an intense beam of infrared laser light may be used to induce selective chemical reactions in molecular species which result in isotope separation or enrichment. The molecular species must have a sufficient density of vibrational states in its vibrational manifold that, is the presence of sufficiently intense infrared laser light tuned to selectively excite only those molecules containing a particular isotope, multiple photon absorption can occur. By this technique, for example, intense CO.sub.2 laser light may be used to highly enrich .sup.34 S in natural SF.sub.6 and .sup.11 B in natural BCl.sub.3.

  10. Laser isotope separation by multiple photon absorption

    DOE Patents [OSTI]

    Robinson, C. Paul; Rockwood, Stephen D.; Jensen, Reed J.; Lyman, John L.; Aldridge, III, Jack P.

    1977-01-01

    Multiple photon absorption from an intense beam of infrared laser light may be used to induce selective chemical reactions in molecular species which result in isotope separation or enrichment. The molecular species must have a sufficient density of vibrational states in its vibrational manifold that, in the presence of sufficiently intense infrared laser light tuned to selectively excite only those molecules containing a particular isotope, multiple photon absorption can occur. By this technique, for example, intense CO.sub.2 laser light may be used to highly enrich .sup.34 S in natural SF.sub.6 and .sup.11 B in natural BCl.sub.3.

  11. Laser isotope separation by multiple photon absorption

    DOE Patents [OSTI]

    Robinson, C.P.; Rockwood, S.D.; Jensen, R.J.; Lyman, J.L.; Aldridge, J.P. III.

    1987-04-07

    Multiple photon absorption from an intense beam of infrared laser light may be used to induce selective chemical reactions in molecular species which result in isotope separation or enrichment. The molecular species must have a sufficient density of vibrational states in its vibrational manifold that, is the presence of sufficiently intense infrared laser light tuned to selectively excite only those molecules containing a particular isotope, multiple photon absorption can occur. By this technique, for example, intense CO[sub 2] laser light may be used to highly enrich [sup 34]S in natural SF[sub 6] and [sup 11]B in natural BCl[sub 3]. 8 figs.

  12. Charged-particle multiplicity at LHC energies

    ScienceCinema (OSTI)

    None

    2011-10-06

    The talk presents the measurement of the pseudorapidity density and the multiplicity distribution with ALICE at the achieved LHC energies of 0.9 and 2.36 TeV.An overview about multiplicity measurements prior to LHC is given and the related theoretical concepts are briefly discussed.The analysis procedure is presented and the systematic uncertainties are detailed. The applied acceptance corrections and the treatment of diffraction are discussed.The results are compared with model predictions. The validity of KNO scaling in restricted phase space regions is revisited. 

  13. PSTD Simulations of Multiple Light Scattering in 3-D Macrocsopic...

    Office of Scientific and Technical Information (OSTI)

    PSTD Simulations of Multiple Light Scattering in 3-D Macrocsopic Random Media Citation Details In-Document Search Title: PSTD Simulations of Multiple Light Scattering in 3-D ...

  14. V-125: Cisco Connected Grid Network Management System Multiple...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5: Cisco Connected Grid Network Management System Multiple Vulnerabilities V-125: Cisco Connected Grid Network Management System Multiple Vulnerabilities April 3, 2013 - 1:44am...

  15. V-152: Cisco Unified Customer Voice Portal (CVP) Multiple Vulnerabilit...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2: Cisco Unified Customer Voice Portal (CVP) Multiple Vulnerabilities V-152: Cisco Unified Customer Voice Portal (CVP) Multiple Vulnerabilities May 9, 2013 - 6:00am Addthis...

  16. V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Automation Application Manager Multiple Vulnerabilities V-145: IBM Tivoli Federated Identity Manager Products Java Multiple Vulnerabilities V-122: IBM Tivoli Application...

  17. V-111: Multiple vulnerabilities have been reported in Puppet...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    vulnerable system. SOLUTION: Update to a fixed version. Addthis Related Articles V-090: Adobe Flash Player AIR Multiple Vulnerabilities V-083: Oracle Java Multiple...

  18. V-051: Oracle Solaris Java Multiple Vulnerabilities | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Related Articles U-191: Oracle Java Multiple Vulnerabilities U-105:Oracle Java SE Critical Patch Update Advisory T-576: Oracle Solaris Adobe Flash Player Multiple Vulnerabilities...

  19. The differential algebra based multiple level fast multipole...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: The differential algebra based multiple level fast multipole algorithm ... Title: The differential algebra based multiple level fast multipole algorithm for 3D space ...

  20. Green's function multiple-scattering theory with a truncated...

    Office of Scientific and Technical Information (OSTI)

    Green's function multiple-scattering theory with a truncated basis set: An augmented-KKR formalism Prev Next Title: Green's function multiple-scattering theory with a ...

  1. Selectivity in multiple quantum nuclear magnetic resonance

    SciTech Connect (OSTI)

    Warren, W.S.

    1980-11-01

    The observation of multiple-quantum nuclear magnetic resonance transitions in isotropic or anisotropic liquids is shown to give readily interpretable information on molecular configurations, rates of motional processes, and intramolecular interactions. However, the observed intensity of high multiple-quantum transitions falls off dramatically as the number of coupled spins increases. The theory of multiple-quantum NMR is developed through the density matrix formalism, and exact intensities are derived for several cases (isotropic first-order systems and anisotropic systems with high symmetry) to shown that this intensity decrease is expected if standard multiple-quantum pulse sequences are used. New pulse sequences are developed which excite coherences and produce population inversions only between selected states, even though other transitions are simultaneously resonant. One type of selective excitation presented only allows molecules to absorb and emit photons in groups of n. Coherent averaging theory is extended to describe these selective sequences, and to design sequences which are selective to arbitrarily high order in the Magnus expansion. This theory and computer calculations both show that extremely good selectivity and large signal enhancements are possible.

  2. Semiconductor laser with multiple lasing wavelengths

    DOE Patents [OSTI]

    Fischer, Arthur J.; Choquette, Kent D.; Chow, Weng W.

    2003-07-29

    A new class of multi-terminal vertical-cavity semiconductor laser components has been developed. These multi-terminal laser components can be switched, either electrically or optically, between distinct lasing wavelengths, or can be made to lase simultaneously at multiple wavelengths.

  3. Offshore multiple well drilling and production apparatus

    SciTech Connect (OSTI)

    Kirkland, K.G.; Masciopinto, A.J.

    1980-03-11

    A modular multiple well drilling and production template structure is combined with a production riser base module to provide an underwater apparatus which allows a plurality of wells to be drilled, completed and produced by operations carried out from a single vessel or platform without remote installation of flowlines.

  4. Electron circuits: semiconductor laser multiple use installation

    SciTech Connect (OSTI)

    Zhou, F.; Fan, J.; Weng, D.

    1983-04-01

    A light source for a multiple use installation using a same matter junction or different matter junction GaAlAs/GaAs semiconductor laser, which has the advantages of high interference resistance, long transmission distance (tens to hundreds of meters), good security, and low power consumption in addition, the controller of the light source has multiple usages of alarming, switching and counting is presented. The multiple use installation can be used in control of breaking warps and counting on roving waste machines, warping machines and silk weaving machines in the textile industry long distance speed measurement, alarming and counting in machinery, electricity and chemical industries and alarming and control of water levels in reservoirs, rivers and water towers, as well as blockade alarming and control of important divisions. This multiple use installation is composed of two parts a laser emitter and a receiving device. The former component is used to produce the laser after the receiver receives the laser, the installation completes operations of alarming, switching and counting.

  5. Harmonic generation with multiple wiggler schemes

    SciTech Connect (OSTI)

    Bonifacio, R.; De Salvo, L.; Pierini, P.

    1995-02-01

    In this paper the authors give a simple theoretical description of the basic physics of the single pass high gain free electron laser (FEL), describing in some detail the FEL bunching properties and the harmonic generation technique with a multiple-wiggler scheme or a high gain optical klystron configuration.

  6. V-083: Oracle Java Multiple Vulnerabilities

    Broader source: Energy.gov [DOE]

    A Critical Patch Update is a collection of patches for multiple security vulnerabilities. The Critical Patch Update for Java SE also includes non-security fixes. Critical Patch Updates are cumulative and each advisory describes only the security fixes added since the previous Critical Patch Update and Security Alert.

  7. A prototype functional language implementation for hierarchical- memory architectures

    SciTech Connect (OSTI)

    Wolski, R.; Feo, J.; Cann, D.

    1992-01-14

    Programming languages are the most important tool at a programmers' disposal. All other tools correct, visualize, or evaluate the product crafted by this tool. The advent of multiprocessor computer systems has greatly complicated the programmer's task an increased his need for high-level languages capable of automatically taming these architectures. In this paper, we describe a prototype implementation of Sisal for multiprocessor, hierarchical-memory systems. The implementation includes explicit compiler and runtime control that effectively exploits the different levels of memory and manages interprocess communications (IPC). We give preliminary performance results for this system on the BBN TC2000.

  8. Vectorization of an applicative language: Current results and future directions

    SciTech Connect (OSTI)

    Cann, D.C.

    1990-11-01

    The most important and challenging problem facing researchers today is the effective use of parallel processors. Few would deny that the biggest obstacle is the inadequacy of current software tools -- an inadequacy born of imperative programming. As an alternative, applicative and functional programming languages provide a cleaner and simpler parallel programming model. They hide architectural idiosyncrasies, guarantee determinancy, enforce software engineering principles, and in many ways simplify compilation. Regrettably these languages have acquired a reputation for inefficiency. In this report, we show that applicative programs do not require special hardware for efficient execution, and with little effort can automatically exploit concurrent and vector processors. 17 refs., 1 fig., 5 tabs.

  9. EnergyPlus Overcomes (Computer) Language Barrier | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Overcomes (Computer) Language Barrier EnergyPlus Overcomes (Computer) Language Barrier October 1, 2014 - 12:15pm Addthis Version 8.2.0 of EnergyPlus is available for download from the popular social coding platform GitHub at <a href="https://github.com/NREL/EnergyPlusRelease/releases" target="_blank">https://github.com/NREL/EnergyPlusRelease/releases</a> Version 8.2.0 of EnergyPlus is available for download from the popular social coding platform GitHub at

  10. T-636: Wireshark Multiple Flaws Let Remote Users Deny Service

    Broader source: Energy.gov [DOE]

    Multiple vulnerabilities were reported in Wireshark. A remote user can cause denial of service conditions.

  11. Microsoft Word - 2013-07-15_Rev_FINAL_LF_2nd_PP_RSS_Language

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1. CFCT AND NEW LARGE SINGLE LOADS 2. RESOURCE SUPPORT SERVICES 2.1 Placeholder: Language under revision in the Clean-Up Amendment process. 2.2 Placeholder: Language under...

  12. Microsoft Word - FINAL_Slice_2nd PP RSS Language_08012011.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1. CFCT AND NEW LARGE SINGLE LOADS 2. RESOURCE SUPPORT SERVICES 2.1 Placeholder: Language under revision in the Clean-Up Amendment process. 2.2 Placeholder: Language under...

  13. coNCePTuaL -- A Network Correctness and Performance Testing Language

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    coNCePTuaL -- A Network Correctness and Performance Testing Language coNCePTuaL -- A Network Correctness and Performance Testing Language coNCePTuaL is a tool designed to...

  14. A Multiple Objective Decision Support Tool (MODS)

    Energy Science and Technology Software Center (OSTI)

    2003-12-14

    The Multiple Objective Decision Support (MODS) tool is an automated tool used to assist decision makers and policy analysts with multiple-objective decision problems. The classes of problems that this decision support tool addresses have both multiple objectives and multiple stakeholders. Decision problems, which have multiple objectives that in general cannot be maximized simultaneously, and multiple stakeholders, who have different perspectives about the relative importance of the objectives, require analytic approaches and tools that can providemore » flexible support to decision makers. This tool provides capabilities for the management, analysis, and graphical display for these types of decision problems drawn from diverse problem domains. The MODS tool is a unique integration of analysis algorithms, an information database, and a graphical user interface. This collection of algorithms, the combination of an information database with the analysis into a single tool, and the graphical user interface provides a technically advanced tool to decision makers and policy analysts. There are two main issues when addressing problems of this type: what set of attributes should be used to characterize the tokens in the domain of interest, and how should the values of these attributes and their weights be determined and combined to provide a relative ordering to the tokens. This tool addresses both of these issues. This decision support tool provides a flexible way to derive and use a chosen set of attributes. For example, the tool could be used to first perform a paired comparison of a large set of attributes and from this evaluation select those attributes that have the highest weights. The flexibility of the tool allows experimentation with various attribute sets and this capability, along with domain expertise, addresses the first issue. To address the second issue, several algorithms have been implemented. For example, two algorithms that have been implemented are

  15. UPC Language and Library Specifications, Version 1.3

    SciTech Connect (OSTI)

    UPC Consortium; Bonachea, Dan; Funck, Gary

    2013-11-16

    UPC is an explicitly parallel extension to the ISO C 99 Standard. UPC follows the partitioned global address space programming model. This document is the formal specification for the UPC language and library syntax and semantics, and supersedes prior specification version 1.2 (LBNL-59208).

  16. Garbage collection for functional languages in a distributed system

    SciTech Connect (OSTI)

    Eckart, J.D.

    1987-01-01

    Garbage collection is a helpful facility provided by many applicative languages such as Prolog, SISAL, FP, and Lisp. While these, and other, languages provide easy recognition of actions that may be executed in parallel, the garbage-collection algorithms used for single-machine environments become significantly more inefficient in multi-machine environments. Thus, in order to make effective use of these languages, more-efficient algorithms for collecting inter-machine structures is needed. Reference marking is the algorithm developed to meet these needs. It takes advantage of the semantics of applicative languages allowing each parallel action to be responsible for collecting any discarded structures it was responsible for creating. Simulation results comparing the performance of reference marking with other distributed garbage-collection algorithms are given. A variety of problem types and sizes are examined to determine the effects of particular styles of computation on each of the garbage-collection algorithms. The results gathered demonstrate the usefulness of the reference-marking algorithm in both uni- and multi-machine systems.

  17. Multiple Scattering Measurements in the MICE Experiment

    SciTech Connect (OSTI)

    Carlisle, T.; Cobb, J.; Neuffer, D.; /Fermilab

    2012-05-01

    The international Muon Ionization Cooling Experiment (MICE), under construction at RAL, will test a prototype cooling channel for a future Neutrino Factory or Muon Collider. The cooling channel aims to achieve, using liquid hydrogen absorbers, a 10% reduction in transverse emittance. The change in 4D emittance will be determined with an accuracy of 1% by measuring muons individually. Step IV of MICE will make the first precise emittance-reduction measurements of the experiment. Simulation studies using G4MICE, based on GEANT4, find a significant difference in multiple scattering in low Z materials, compared with the standard expression quoted by the Particle Data Group. Direct measurement of multiple scattering using the scintillating-fibre trackers is found to be possible, but requires the measurement resolution to be unfolded from the data.

  18. Combining Multiple Pairwise Structure-based Alignments

    Energy Science and Technology Software Center (OSTI)

    2014-11-12

    CombAlign is a new Python code that generates a gapped, one-to-many, multiple structure-based sequence alignment(MSSA) given a set of pairwise structure-based alignments. In order to better define regions of similarity among related protein structures, it is useful to detect the residue-residue correspondences among a set of pairwise structure alignments. Few codes exist for constructing a one-to-many, multiple sequence alignment derived from a set of structure alignments, and we perceived a need for creating a newmore » tool for combing pairwise structure alignments that would allow for insertion of gaps in the reference structure.« less

  19. Lamp method and apparatus using multiple reflections

    DOE Patents [OSTI]

    MacLennan, Donald A.; Turner, Brian; Kipling, Kent

    1999-01-01

    A method wherein the light in a sulfur or selenium lamp is reflected through the fill a multiplicity of times to convert ultraviolet radiation to visible. A light emitting device comprised of an electrodeless envelope which bears a light reflecting covering around a first portion which does not crack due to differential thermal expansion and which has a second portion which comprises a light transmissive aperture.

  20. MCNP6 Fission Multiplicity with FMULT Card

    SciTech Connect (OSTI)

    Wilcox, Trevor; Fensin, Michael Lorne; Hendricks, John S.; James, Michael R.; McKinney, Gregg W.

    2012-06-18

    With the merger of MCNPX and MCNP5 into MCNP6, MCNP6 now provides all the capabilities of both codes allowing the user to access all the fission multiplicity data sets. Detailed in this paper is: (1) the new FMULT card capabilities for accessing these different data sets; (2) benchmark calculations, as compared to experiment, detailing the results of selecting these separate data sets for thermal neutron induced fission on U-235.

  1. Benchmarking of multiple preequilibrium routines in GNASH

    SciTech Connect (OSTI)

    Chadwick, M.B.; Young, P.G.

    1994-08-01

    The authors compare two different models for multiple preequilibrium emission (MPE) in GNASH: the older exciton MPE model; and a new generalized MPE model which is parameter-free. They analyze the proton-induced reactions on zirconium and lead, which were the focus of a recent NEA intermediate-energy code intercomparison, using both the MPE models. They find that the new generalized MPE model better describes the measurements.

  2. ORISE: Multiple research appointments available through Agricultural

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Service Postdoctoral Research Program Multiple research appointments available through Agricultural Research Service Postdoctoral Research Program Selected candidates participate in USDA research for one to four years FOR IMMEDIATE RELEASE March 26, 2014 FY14-23 OAK RIDGE, Tenn.-ORAU and the U.S. Department of Agriculture are currently seeking recent doctoral degree recipients for various appointments in the Agricultural Research Service Postdoctoral Research Program. The ARS is the

  3. Alternatives for Helium-3 in Multiplicity Counters

    SciTech Connect (OSTI)

    Ely, James H.; Siciliano, Edward R.; Lintereur, Azaree T.; Swinhoe, Martyn T.

    2013-04-01

    Alternatives to helium-3 are being actively pursued due to the shortage and rising costs of helium-3. For safeguards applications, there are a number of ongoing investigations to find alternatives that provide the same capability in a cost-effective manner. One of the greatest challenges is to find a comparable alternative for multiplicity counters, since they require high efficiency and short collection or die-away times. Work has been progressing on investigating three commercially available alternatives for high efficiency multiplicity counters: boron trifluoride (BF3) filled proportional tubes, boron-lined proportional tubes, and lithium fluoride with zinc sulfide coated light guides. The baseline multiplicity counter used for the investigation is the Epithermal Neutron Multiplicity Counter with 121 helium-3 filled tubes at 10 atmosphere pressure, which is a significant capability to match. The primary tool for the investigation has been modeling and simulation using the Monte Carlo N-Particle eXtended (MCNPX) radiation transport program, with experiments to validate the models. To directly calculate the coincidence rates in boron-lined (and possibly other) detectors, the MCNPX code has been enhanced to allow the existing coincidence tally to be used with energy deposition rather than neutron capture reactions. This allows boron-lined detectors to be modeled more accurately. Variations of tube number and diameter along with variations in the amount of inter-tube moderator have been conducted for the BF3 and boron-lined cases. Tube pressure was investigated for BF3, up to two atmospheres, as well as optimal boron thickness in the boron-lined tubes. The lithium fluoride was modeled as sheets of material with light guides in between, and the number and thickness of the sheets investigated. The amount of light guide, which in this case doubles as a moderator, was also optimized. The results of these modeling and simulation optimization investigations are described

  4. Lamp method and apparatus using multiple reflections

    DOE Patents [OSTI]

    MacLennan, D.A.; Turner, B.; Kipling, K.

    1999-05-11

    A method wherein the light in a sulfur or selenium lamp is reflected through the fill a multiplicity of times to convert ultraviolet radiation to visible is disclosed. A light emitting device comprised of an electrodeless envelope which bears a light reflecting covering around a first portion which does not crack due to differential thermal expansion and which has a second portion which comprises a light transmissive aperture. 20 figs.

  5. Multiple-reflection optical gas cell

    DOE Patents [OSTI]

    Matthews, Thomas G.

    1983-01-01

    A multiple-reflection optical cell for Raman or fluorescence gas analysis consists of two spherical mirrors positioned transverse to a multiple-pass laser cell in a confronting plane-parallel alignment. The two mirrors are of equal diameter but possess different radii of curvature. The spacing between the mirrors is uniform and less than half of the radius of curvature of either mirror. The mirror of greater curvature possesses a small circular portal in its center which is the effective point source for conventional F1 double lens collection optics of a monochromator-detection system. Gas to be analyzed is flowed into the cell and irradiated by a multiply-reflected composite laser beam centered between the mirrors of the cell. Raman or fluorescence radiation originating from a large volume within the cell is (1) collected via multiple reflections with the cell mirrors, (2) partially collimated and (3) directed through the cell portal in a geometric array compatible with F1 collection optics.

  6. MPACT Fast Neutron Multiplicity System Prototype Development

    SciTech Connect (OSTI)

    D.L. Chichester; S.A. Pozzi; J.L. Dolan; M.T. Kinlaw; S.J. Thompson; A.C. Kaplan; M. Flaska; A. Enqvist; J.T. Johnson; S.M. Watson

    2013-09-01

    This document serves as both an FY2103 End-of-Year and End-of-Project report on efforts that resulted in the design of a prototype fast neutron multiplicity counter leveraged upon the findings of previous project efforts. The prototype design includes 32 liquid scintillator detectors with cubic volumes 7.62 cm in dimension configured into 4 stacked rings of 8 detectors. Detector signal collection for the system is handled with a pair of Struck Innovative Systeme 16-channel digitizers controlled by in-house developed software with built-in multiplicity analysis algorithms. Initial testing and familiarization of the currently obtained prototype components is underway, however full prototype construction is required for further optimization. Monte Carlo models of the prototype system were performed to estimate die-away and efficiency values. Analysis of these models resulted in the development of a software package capable of determining the effects of nearest-neighbor rejection methods for elimination of detector cross talk. A parameter study was performed using previously developed analytical methods for the estimation of assay mass variance for use as a figure-of-merit for system performance. A software package was developed to automate these calculations and ensure accuracy. The results of the parameter study show that the prototype fast neutron multiplicity counter design is very nearly optimized under the restraints of the parameter space.

  7. Apparatus for manifolding multiple passage solar panel

    SciTech Connect (OSTI)

    Mcalister, R.E.

    1982-06-08

    A method of sealingly connecting a thermoplastic solar panel structure comprising a multiplicity of elongated thin wall sections defining a multiplicity of parallel passages extending longitudinally between the ends of said panel structure to a thermoplastic manifold tube comprising the steps of mounting an elongated mandrel having a multiplicity of transversely projecting elements corresponding in number and spacing to the panel passages to be communicated with the interior of the manifold tube, positioning a side wall portion of the manifold tube in predetermined spaced relation with the open end of the panel structure so that the projecting elements of the mandrel are generally longitudinally aligned with the open ends of a corresponding member of the passages in the panel structure, heating the spaced panel structure end and the manifold tube side wall portion to soften the thermoplastic material thereof, moving the mandrel within the manifold tube so as to position the projecting elements through the side wall portion thereof and into the open ends of said corresponding panel structure passages and the manifold tube toward the panel structure end so as to cause the manifold tube side wall portion to apply a pressure to the panel structure end sufficient to deform the thermoplastic material thereof and effect a fusing of the same into a unitary mass, and withdrawing the mandrel in the direction of extent of the projecting elements to a position within the interior of the manifold tube and then longitudinally out of the manifold tube and apparatus for carrying out the method.

  8. Radial velocities of southern visual multiple stars

    SciTech Connect (OSTI)

    Tokovinin, Andrei; Pribulla, Theodor; Fischer, Debra E-mail: pribulla@ta3.sk

    2015-01-01

    High-resolution spectra of visual multiple stars were taken in 20082009 to detect or confirm spectroscopic subsystems and to determine their orbits. Radial velocities of 93 late-type stars belonging to visual multiple systems were measured by numerical cross-correlation. We provide the individual velocities, the width, and the amplitude of the Gaussians that approximate the correlations. The new information on the multiple systems resulting from these data is discussed. We discovered double-lined binaries in HD 41742B, HD 56593C, and HD 122613AB, confirmed several other known subsystems, and constrained the existence of subsystems in some visual binaries where both components turned out to have similar velocities. The orbits of double-lined subsystems with periods of 148 and 13 days are computed for HD 104471 Aa,Ab and HD 210349 Aa,Ab, respectively. We estimate individual magnitudes and masses of the components in these triple systems and update the outer orbit of HD 104471 AB.

  9. Method for manifolding multiple passage solar panel

    SciTech Connect (OSTI)

    Mcalister, R.E.

    1981-11-17

    A method of sealingly connecting a thermoplastic solar panel structure comprising a multiplicity of elongated thin wall sections defining a multiplicity of parallel passages extending longitudinally between the ends of said panel structure to a thermoplastic manifold tube is described. An elongated mandrel is mounted having a multiplicity of transversely projecting elements corresponding in number and spacing to the panel passages to be communicated with the interior of the manifold tube. A side wall portion of the manifold tube is positioned in predetermined spaced relation with the open end of the panel structure so that the projecting elements of the mandrel are generally longitudinally aligned with the open ends of a corresponding member of the passages in the panel structure. The spaced panel structure end and the manifold tube side wall portion are heated to soften the thermoplastic material thereof. The mandrel is moved within the manifold tube so as to position the projecting elements through the side wall portion thereof and into the open ends of said corresponding panel structure passages and the manifold tube toward the panel structure end so as to cause the manifold tube side wall portion to apply a pressure to the panel structure end sufficient to deform the thermoplastic material thereof and effect a fusing of the same into a unitary mass. The mandrel is then withdrawn in the direction of extent of the projecting elements to a position within the interior of the manifold tube and then longitudinally out of the manifold tube and apparatus for carrying out the method.

  10. Generating multiple new designs from a sketch

    SciTech Connect (OSTI)

    Stahovich, T.F.; Davis, R.; Shrobe, H.

    1996-12-31

    We describe a program called SKETCHIT that transforms a single sketch of a mechanical device into multiple families of new designs. It represents each of these families with a {open_quotes}BEP-Model,{close_quotes} a parametric model augmented with constraints that ensure the device produces the desired behavior. The program is based on qualitative configuration space (qc-space), a novel representation that captures mechanical behavior while abstracting away its implementation. The program employs a paradigm of abstraction and resynthesis: it abstracts the initial sketch into qc-space then maps from qc-space to new implementations.

  11. Multiple volume compressor for hot gas engine

    DOE Patents [OSTI]

    Stotts, Robert E.

    1986-01-01

    A multiple volume compressor for use in a hot gas (Stirling) engine having a plurality of different volume chambers arranged to pump down the engine when decreased power is called for and return the working gas to a storage tank or reservoir. A valve actuated bypass loop is placed over each chamber which can be opened to return gas discharged from the chamber back to the inlet thereto. By selectively actuating the bypass valves, a number of different compressor capacities can be attained without changing compressor speed whereby the capacity of the compressor can be matched to the power available from the engine which is used to drive the compressor.

  12. Expression of multiple proteins in transgenic plants

    DOE Patents [OSTI]

    Vierstra, Richard D.; Walker, Joseph M.

    2002-01-01

    A method is disclosed for the production of multiple proteins in transgenic plants. A DNA construct for introduction into plants includes a provision to express a fusion protein of two proteins of interest joined by a linking domain including plant ubiquitin. When the fusion protein is produced in the cells of a transgenic plant transformed with the DNA construction, native enzymes present in plant cells cleave the fusion protein to release both proteins of interest into the cells of the transgenic plant. Since the proteins are produced from the same fusion protein, the initial quantities of the proteins in the cells of the plant are approximately equal.

  13. Asymmetric acoustic transmission in multiple frequency bands

    SciTech Connect (OSTI)

    Sun, Hong-xiang; Yuan, Shou-qi; Zhang, Shu-yi

    2015-11-23

    We report both experimentally and numerically that the multi-band device of the asymmetric acoustic transmission is realized by placing two periodic gratings with different periods on both sides of two brass plates immersed in water. The asymmetric acoustic transmission can exist in four frequency bands below 1500 kHz, which arises from the interaction between various diffractions from the two gratings and Lamb modes in the brass plates immersed in water. The results indicate that the device has the advantages of multiple band, broader bandwidth, and simpler structure. Our finding should have great potential applications in ultrasonic devices.

  14. Multiple frequency method for operating electrochemical sensors

    DOE Patents [OSTI]

    Martin, Louis P.

    2012-05-15

    A multiple frequency method for the operation of a sensor to measure a parameter of interest using calibration information including the steps of exciting the sensor at a first frequency providing a first sensor response, exciting the sensor at a second frequency providing a second sensor response, using the second sensor response at the second frequency and the calibration information to produce a calculated concentration of the interfering parameters, using the first sensor response at the first frequency, the calculated concentration of the interfering parameters, and the calibration information to measure the parameter of interest.

  15. A Global View Programming Abstraction for Transitioning MPI Codes to PGAS Languages

    SciTech Connect (OSTI)

    Mintz, Tiffany M [ORNL] [ORNL; Hernandez, Oscar R [ORNL] [ORNL; Bernholdt, David E [ORNL] [ORNL

    2014-01-01

    The multicore generation of scientific high performance computing has provided a platform for the realization of Exascale computing, and has also underscored the need for new paradigms in coding parallel applications. The current standard for writing parallel applications requires programmers to use languages designed for sequential execution. These languages have abstractions that only allow programmers to operate on the process centric local view of data. To provide suitable languages for parallel execution, many research efforts have designed languages based on the Partitioned Global Address Space (PGAS) programming model. Chapel is one of the more recent languages to be developed using this model. Chapel supports multithreaded execution with high-level abstractions for parallelism. With Chapel in mind, we have developed a set of directives that serve as intermediate expressions for transitioning scientific applications from languages designed for sequential execution to PGAS languages like Chapel that are being developed with parallelism in mind.

  16. Observation of laser multiple filamentation process and multiple electron beams acceleration in a laser wakefield accelerator

    SciTech Connect (OSTI)

    Li, Wentao; Liu, Jiansheng; Wang, Wentao; Chen, Qiang; Zhang, Hui; Tian, Ye; Zhang, Zhijun; Qi, Rong; Wang, Cheng; Leng, Yuxin; Li, Ruxin; Xu, Zhizhan

    2013-11-15

    The multiple filaments formation process in the laser wakefield accelerator (LWFA) was observed by imaging the transmitted laser beam after propagating in the plasma of different density. During propagation, the laser first self-focused into a single filament. After that, it began to defocus with energy spreading in the transverse direction. Two filaments then formed from it and began to propagate independently, moving away from each other. We have also demonstrated that the laser multiple filamentation would lead to the multiple electron beams acceleration in the LWFA via ionization-induced injection scheme. Besides, its influences on the accelerated electron beams were also analyzed both in the single-stage LWFA and cascaded LWFA.

  17. Flaw Tolerance for Multiple Fatique Cracks

    SciTech Connect (OSTI)

    Gosselin, Stephen R.; Simonen, Fredric A.; Carter, R. G.

    2005-07-01

    This paper documents important details of the technical bases for changes to Appendix L. Calculations identified aspect ratios for equivalent single cracks (ESC) between the extremes of a 6:1 ratio and a full circumferential crack that can be used in Appendix L flaw tolerance assessments to account for the initiation, growth, and linking of multiple fatigue cracks. Probabilistic fracture mechanics (PFM) calculations determined ESC aspect ratios that result in the same through-wall crack probability as multiple small cracks (0.02 inch depth) that initiate and coalesce. The computations considered two materials (stainless and low alloy steels), three pipe diameters, five cyclic membrane-to-gradient stress ratios and a wide range of primary loads. Subsequent deterministic calculations identified the ESC aspect ratio for the hypothetical reference flaw depth assumptions in Appendix L. This paper also describes computations that compare the Appendix L flaw tolerance allowable operating period for the ESC models with results obtained when the a single default 6:1 aspect ratio reference flaw.

  18. Multiple output timing and trigger generator

    SciTech Connect (OSTI)

    Wheat, Robert M.; Dale, Gregory E

    2009-01-01

    In support of the development of a multiple stage pulse modulator at the Los Alamos National Laboratory, we have developed a first generation, multiple output timing and trigger generator. Exploiting Commercial Off The Shelf (COTS) Micro Controller Units (MCU's), the timing and trigger generator provides 32 independent outputs with a timing resolution of about 500 ns. The timing and trigger generator system is comprised of two MCU boards and a single PC. One of the MCU boards performs the functions of the timing and signal generation (the timing controller) while the second MCU board accepts commands from the PC and provides the timing instructions to the timing controller. The PC provides the user interface for adjusting the on and off timing for each of the output signals. This system provides 32 output or timing signals which can be pre-programmed to be in an on or off state for each of 64 time steps. The width or duration of each of the 64 time steps is programmable from 2 {micro}s to 2.5 ms with a minimum time resolution of 500 ns. The repetition rate of the programmed pulse train is only limited by the time duration of the programmed event. This paper describes the design and function of the timing and trigger generator system and software including test results and measurements.

  19. Multiple-use marketing of lignite

    SciTech Connect (OSTI)

    Knudson, C.L.

    1993-09-01

    Marketing of lignite faces difficulties due to moisture and sulfur contents, as well as the sodium content, of the ash. The purpose of this study is to determine the economic viability of multiple-use marketing of lignite as a method to increase the use of North Dakota lignite by recapturing lost niche markets. Multiple-use marketing means using lignite and sulfur-capturing additives to clean agricultural wastewater followed by either direct steam and power generation or briquetting to produce a higher-Btu compliance fuel. Cooperative ownership of the resulting business by a coal company and an agriculture processing company helps ensure that lignite remains the coal of choice, especially when the ``good`` attributes of lignites are maximized, while the agricultural company obtains cleaner wastewater and a long-term supply of coal at a set price. The economic viabilities of the following scenarios were investigated: (1) Agriprocessing wastewater treatment using lignite and an additive followed by (2) the production of compliance fuel for resale or on-site cogeneration of steam and electricity. Laboratory tests were performed utilizing potato-processing plant wastewater with lignite and lime sludge.

  20. 3-D simulations of multiple beam klystrons

    SciTech Connect (OSTI)

    Smithe, David N.; Bettenhausen, Mike; Ludeking, Larry; Caryotakis, G.; Sprehn, Daryl; Scheitrum, Glenn [Mission Research Corporation, 8560 Cinderbed Rd., Suite 700, Newington, Virginia 22122 (United States); Stanford Linear Accelerator Center, 2575 Sand Hill Rd., Menlo Park, California 94025 (United States)

    1999-05-07

    The MAGIC3D simulation code is being used to assess the multi-dimensional physics issues relating to the design and operation of multiple beam klystrons. Investigations, to date, include a detailed study of the mode structure of the cavities in the 19-beam hexagonally packed geometry and a study of the velocity spread caused by the cavity mode's field profile. Some attempts to minimize this effect are investigated. Additional simulations have provided quantification of the beam loading Q in a dual input cavity, and optimization of a dual output cavity. An important goal of the simulations is an accurate picture of beam transport along the length of the MBK. We have quantified the magnitude and spatial variation of the beam-line space charge interactions within a cavity gap. Present simulations have demonstrated the transport of the beam through three cavities (the present limits of our simulation size) without difficulty; additional length simulations are expected. We have also examined unbalanced beam-line scenarios, e.g., one beam-line suppressed, and find little disturbance to the transport in individual cavity tests, with results for multiple cavity transport expected.

  1. Geometry Description Markup Language for Physics Simulation And Analysis Applications.

    SciTech Connect (OSTI)

    Chytracek, R.; McCormick, J.; Pokorski, W.; Santin, G.; /European Space Agency

    2007-01-23

    The Geometry Description Markup Language (GDML) is a specialized XML-based language designed as an application-independent persistent format for describing the geometries of detectors associated with physics measurements. It serves to implement ''geometry trees'' which correspond to the hierarchy of volumes a detector geometry can be composed of, and to allow to identify the position of individual solids, as well as to describe the materials they are made of. Being pure XML, GDML can be universally used, and in particular it can be considered as the format for interchanging geometries among different applications. In this paper we will present the current status of the development of GDML. After having discussed the contents of the latest GDML schema, which is the basic definition of the format, we will concentrate on the GDML processors. We will present the latest implementation of the GDML ''writers'' as well as ''readers'' for either Geant4 [2], [3] or ROOT [4], [10].

  2. T-574: Google Chrome Multiple Flaws Let Remote Users Execute...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code T-574: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code March 10, 2011 - 3:05pm Addthis...

  3. V-119: IBM Security AppScan Enterprise Multiple Vulnerabilities...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    9: IBM Security AppScan Enterprise Multiple Vulnerabilities V-119: IBM Security AppScan Enterprise Multiple Vulnerabilities March 26, 2013 - 12:56am Addthis PROBLEM: IBM Security...

  4. V-191: Apple Mac OS X Multiple Vulnerabilities | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1: Apple Mac OS X Multiple Vulnerabilities V-191: Apple Mac OS X Multiple Vulnerabilities July 3, 2013 - 6:00am Addthis PROBLEM: Apple has issued a security update for Mac OS X...

  5. DOE Selects Two Contractors for Multiple-Award Waste Disposal...

    Office of Environmental Management (EM)

    Selects Two Contractors for Multiple-Award Waste Disposal Contract DOE Selects Two Contractors for Multiple-Award Waste Disposal Contract April 12, 2013 - 12:00pm Addthis Media ...

  6. V-132: IBM Tivoli System Automation Application Manager Multiple

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vulnerabilities | Department of Energy 2: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities V-132: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities April 12, 2013 - 6:00am Addthis PROBLEM: IBM has acknowledged multiple vulnerabilities in IBM Tivoli System Automation Application Manager PLATFORM: The vulnerabilities are reported in IBM Tivoli System Automation Application Manager versions 3.1, 3.2, 3.2.1, and 3.2.2 ABSTRACT: Multiple security

  7. V-180: IBM Application Manager For Smart Business Multiple Vulnerabilities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy 0: IBM Application Manager For Smart Business Multiple Vulnerabilities V-180: IBM Application Manager For Smart Business Multiple Vulnerabilities June 18, 2013 - 12:38am Addthis PROBLEM: IBM Application Manager For Smart Business Multiple Vulnerabilities PLATFORM: IBM Application Manager For Smart Business 1.x ABSTRACT: A security issue and multiple vulnerabilities have been reported in IBM Application Manager For Smart Business REFERENCE LINKS: Security Bulletin

  8. U-013: HP Data Protector Multiple Unspecified Vulnerabilities

    Broader source: Energy.gov [DOE]

    Multiple vulnerabilities were reported in HP Data Protector. A remote user can execute arbitrary code on the target system.

  9. Project Profile: CSP Energy Storage Solutions - Multiple Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Concentrating Solar Power Project Profile: CSP Energy Storage Solutions - Multiple ... construction techniques Development of system operation strategies Maximization of ...

  10. Interested Parties - Allowing Multiple Projects per Application for Section

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1705 Loan Guarantees | Department of Energy Allowing Multiple Projects per Application for Section 1705 Loan Guarantees Interested Parties - Allowing Multiple Projects per Application for Section 1705 Loan Guarantees Multiple_Projects_Section_1705_Loan_Guarantees.pdf (24.78 KB) More Documents & Publications Interested Parties - Multiple Loan Applications per Developer under Section 1705 Program Interested Parties - K&L Group Lobbyist Disclosure Form - John Thorne

  11. Interested Parties - Multiple Loan Applications per Developer under Section

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1705 Program | Department of Energy Multiple Loan Applications per Developer under Section 1705 Program Interested Parties - Multiple Loan Applications per Developer under Section 1705 Program (86.96 KB) More Documents & Publications Interested Parties - Allowing Multiple Projects per Application for Section 1705 Loan Guarantees Interested Parties - K&L Group Interested Parties - Shipp

  12. MPACT Fast Neutron Multiplicity System Design Concepts

    SciTech Connect (OSTI)

    D. L. Chichester; S. A. Pozzi; J. L. Dolan; M. T. Kinlaw; A. C. Kaplan; M. Flaska; A. Enqvist; J. T. Johnsom; S. M. Watson

    2012-10-01

    This report documents work performed by Idaho National Laboratory and the University of Michigan in fiscal year (FY) 2012 to examine design parameters related to the use of fast-neutron multiplicity counting for assaying plutonium for materials protection, accountancy, and control purposes. This project seeks to develop a new type of neutron-measurement-based plutonium assay instrument suited for assaying advanced fuel cycle materials. Some current-concept advanced fuels contain high concentrations of plutonium; some of these concept fuels also contain other fissionable actinides besides plutonium. Because of these attributes the neutron emission rates of these new fuels may be much higher, and more difficult to interpret, than measurements made of plutonium-only materials. Fast neutron multiplicity analysis is one approach for assaying these advanced nuclear fuels. Studies have been performed to assess the conceptual performance capabilities of a fast-neutron multiplicity counter for assaying plutonium. Comparisons have been made to evaluate the potential improvements and benefits of fast-neutron multiplicity analyses versus traditional thermal-neutron counting systems. Fast-neutron instrumentation, using for example an array of liquid scintillators such as EJ-309, have the potential to either a) significantly reduce assay measurement times versus traditional approaches, for comparable measurement precision values, b) significantly improve assay precision values, for measurement durations comparable to current-generation technology, or c) moderating improve both measurement precision and measurement durations versus current-generation technology. Using the MCNPX-PoliMi Monte Carlo simulation code, studies have been performed to assess the doubles-detection efficiency for a variety of counter layouts of cylindrical liquid scintillator detector cells over one, two, and three rows. Ignoring other considerations, the best detector design is the one with the most

  13. Multiple hearth furnace for reducing iron oxide

    DOE Patents [OSTI]

    Brandon, Mark M. (Charlotte, NC); True, Bradford G. (Charlotte, NC)

    2012-03-13

    A multiple moving hearth furnace (10) having a furnace housing (11) with at least two moving hearths (20) positioned laterally within the furnace housing, the hearths moving in opposite directions and each moving hearth (20) capable of being charged with at least one layer of iron oxide and carbon bearing material at one end, and being capable of discharging reduced material at the other end. A heat insulating partition (92) is positioned between adjacent moving hearths of at least portions of the conversion zones (13), and is capable of communicating gases between the atmospheres of the conversion zones of adjacent moving hearths. A drying/preheat zone (12), a conversion zone (13), and optionally a cooling zone (15) are sequentially positioned along each moving hearth (30) in the furnace housing (11).

  14. Multiple predictor smoothing methods for sensitivity analysis.

    SciTech Connect (OSTI)

    Helton, Jon Craig; Storlie, Curtis B.

    2006-08-01

    The use of multiple predictor smoothing methods in sampling-based sensitivity analyses of complex models is investigated. Specifically, sensitivity analysis procedures based on smoothing methods employing the stepwise application of the following nonparametric regression techniques are described: (1) locally weighted regression (LOESS), (2) additive models, (3) projection pursuit regression, and (4) recursive partitioning regression. The indicated procedures are illustrated with both simple test problems and results from a performance assessment for a radioactive waste disposal facility (i.e., the Waste Isolation Pilot Plant). As shown by the example illustrations, the use of smoothing procedures based on nonparametric regression techniques can yield more informative sensitivity analysis results than can be obtained with more traditional sensitivity analysis procedures based on linear regression, rank regression or quadratic regression when nonlinear relationships between model inputs and model predictions are present.

  15. Multiple channel optical data acquisition system

    DOE Patents [OSTI]

    Fasching, G.E.; Goff, D.R.

    1985-02-22

    A multiple channel optical data acquisition system is provided in which a plurality of remote sensors monitoring specific process variable are interrogated by means of a single optical fiber connecting the remote station/sensors to a base station. The remote station/sensors derive all power from light transmitted through the fiber from the base station. Each station/sensor is individually accessed by means of a light modulated address code sent over the fiber. The remote station/sensors use a single light emitting diode to both send and receive light signals to communicate with the base station and provide power for the remote station. The system described can power at least 100 remote station/sensors over an optical fiber one mile in length.

  16. Total lymphoid irradiation for multiple sclerosis

    SciTech Connect (OSTI)

    Devereux, C.K.; Vidaver, R.; Hafstein, M.P.; Zito, G.; Troiano, R.; Dowling, P.C.; Cook, S.D.

    1988-01-01

    Although chemical immunosuppression has been shown to benefit patients with chronic progressive multiple sclerosis (MS), it appears that chemotherapy has an appreciable oncogenic potential in patients with multiple sclerosis. Accordingly, we developed a modified total lymphoid irradiation (TLI) regimen designed to reduce toxicity and applied it to a randomized double blind trial of TLI or sham irradiation in MS. Standard TLI regimens were modified to reduce dose to 1,980 rad, lowering the superior mantle margin to midway between the thyroid cartilage and angle of the mandible (to avert xerostomia) and the lower margin of the mantle field to the inferior margin of L1 (to reduce gastrointestinal toxicity by dividing abdominal radiation between mantle and inverted Y), limiting spinal cord dose to 1,000 rad by custom-made spine blocks in the mantle and upper 2 cm of inverted Y fields, and also protecting the left kidney even if part of the spleen were shielded. Clinical efficacy was documented by the less frequent functional scale deterioration of 20 TLI treated patients with chronic progressive MS compared to to 20 sham-irradiated progressive MS patients after 12 months (16% versus 55%, p less than 0.03), 18 months (28% versus 63%, p less than 0.03), and 24 months (44% versus 74%, N.S.). Therapeutic benefit during 3 years follow-up was related to the reduction in lymphocyte count 3 months post-irradiation (p less than 0.02). Toxicity was generally mild and transient, with no instance of xerostomia, pericarditis, herpes zoster, or need to terminate treatment in TLI patients. However, menopause was induced in 2 patients and staphylococcal pneumonia in one.

  17. Prompt Neutron Multiplicity Measurements with Portable Detectors

    SciTech Connect (OSTI)

    S. Mukhopadhyay, R. Wolff, R. Maurer, S. Mitchell, E. X. Smith, P. Guss, J. L. Lacy, L. Sun, A. Athanasiades

    2011-09-01

    Mobile detection of kilogram quantities of special nuclear materials (SNM) during maritime transportation is a challenging problem for the U.S. Department of Homeland Security. Counting neutrons emitted by the SNM and partitioning them from background neutrons of multiple origins is the most effective passive means of detecting the SNM. Unfortunately, neutron detection, counting, and partitioning in a maritime environment is complex due to the presence of spallation neutrons (commonly known as “ship effect”) and to the complicated nature of the neutron scattering in that environment. This work studied the possibilities of building a prototype neutron detector using boron- 10 (10B) as the converter in a novel form factor called “straws” that would address the above problem by examining multiplicity distributions of neutrons originating from a fissioning source. Currently, commercially manufactured fission meters (FM) are available that separate cosmic neutrons from non-cosmic neutrons and quantitatively determine the strength of a fissioning source; however, these FMs use 3He, which is becoming increasingly difficult to procure; also the size and weight of a commercial FM is not conducive to manual neutron detection operations in a maritime environment. The current project may provide a near-term solution to the crisis that has arisen from the global scarcity of 3He by offering a viable alternative to the FM. The prototype detector provides a large-area, efficient, lightweight, more granular neutron responsive detection surface (to facilitate imaging) to ease the application of the new FMs. A novel prototype fission meter is being designed at National Security Technologies, LLC, using a thin uniform coating of 10B as neutron converter (only 1 micron thick) inside a large array of thin (4 mm diameter) copper tubes. The copper tubes are only 2-mil thick, and each holds the stretched anode wire under tension and high voltage. The tubes are filled with

  18. Subcritical Measurements Multiple HEU Metal Castings

    SciTech Connect (OSTI)

    Mihalczo, John T [ORNL] [ORNL; Archer, Daniel E [ORNL] [ORNL; Wright, Michael C [ORNL] [ORNL

    2008-01-01

    Experiments with the standard annular highly enriched uranium (HEU) metal castings at Y-12 were performed in which up to 5 castings ({approx}90kg) were assembled in a tightly packed array with minimal spacing between castings. The fission chain multiplication process was initiated by a time tagged {sup 253}Cf spontaneously fissioning neutron source or time and directionally tagged neutrons from a small portable DT neutron generator and the prompt neutron time behavior measured with plastic scintillation detectors sensitive the fast neutron (>1 MeV) and gamma ray without distinction. These experiments were performed to provide data to benchmark methods for the calculation of the prompt neutron time behavior. Previous measurements with a single casting have been reported. This paper presents the experimental results for multiple castings. The prompt time decay was obtained by time coincidence correlation measurements between the detectors and the time tagged neutron source emission (equivalent to randomly pulsed neutron measurements) and between pairs of plastic scintillation detectors (equivalent to a 2-detector Rossi-alpha measurement). These standard HEU storage castings at the Y-12 plant had 5.000-in-OD, 3.500-in-ID, masses between 17,636 and 17,996 g, impurity content of 992 ppm, density of 18.75 g/cm{sup 3} and average enrichment of 93.16 wt % {sup 235}U. The castings were in tight fitting 025-in.-thick, 8.0-in-high stainless steel (SS-304) cylindrical cans for contamination control which were 8.0 in high. One can had an inside diameter of 3.0 in so that the Cf source could be located on the axes of this casting. Four 1 x 1 x 6 in plastic scintillators with the long dimension perpendicular to axes of the castings and adjacent to the outer surface of the casting cans were used. The detectors were enclosed in 1/4.-in.-thick lead shields on four 1 x 6 surfaces and on the 1 x 1 surface. The small surface of the lead shield was adjacent to the steel table. The

  19. Multiple-Input Multiple-Output (MIMO) Linear Systems Extreme Inputs/Outputs

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Smallwood, David O.

    2007-01-01

    A linear structure is excited at multiple points with a stationary normal random process. The response of the structure is measured at multiple outputs. If the autospectral densities of the inputs are specified, the phase relationships between the inputs are derived that will minimize or maximize the trace of the autospectral density matrix of the outputs. If the autospectral densities of the outputs are specified, the phase relationships between the outputs that will minimize or maximize the trace of the input autospectral density matrix are derived. It is shown that other phase relationships and ordinary coherence less than one willmore » result in a trace intermediate between these extremes. Least favorable response and some classes of critical response are special cases of the development. It is shown that the derivation for stationary random waveforms can also be applied to nonstationary random, transients, and deterministic waveforms.« less

  20. Energy Audits and Retro-Commissioning: State and Local Policy Design Guide and Sample Policy Language

    SciTech Connect (OSTI)

    2013-07-29

    Provides guidance and sample policy language to help state and local governments enact and implement policies addressing energy assessments of or improvements to existing commercial buildings

  1. Review guidelines on software languages for use in nuclear power plant safety systems. Final report

    SciTech Connect (OSTI)

    Hecht, H.; Hecht, M.; Graff, S.; Green, W.; Lin, D.; Koch, S.; Tai, A.; Wendelboe, D.

    1996-06-01

    Guidelines for the programming and auditing of software written in high level languages for safety systems are presented. The guidelines are derived from a framework of issues significant to software safety which was gathered from relevant standards and research literature. Language-specific adaptations of these guidelines are provided for the following high level languages: Ada, C/C++, Programmable Logic Controller (PLC) Ladder Logic, International Electrotechnical Commission (IEC) Standard 1131-3 Sequential Function Charts, Pascal, and PL/M. Appendices to the report include a tabular summary of the guidelines and additional information on selected languages.s

  2. Visual language recognition with a feed-forward network of spiking neurons

    SciTech Connect (OSTI)

    Rasmussen, Craig E; Garrett, Kenyan; Sottile, Matthew; Shreyas, Ns

    2010-01-01

    An analogy is made and exploited between the recognition of visual objects and language parsing. A subset of regular languages is used to define a one-dimensional 'visual' language, in which the words are translational and scale invariant. This allows an exploration of the viewpoint invariant languages that can be solved by a network of concurrent, hierarchically connected processors. A language family is defined that is hierarchically tiling system recognizable (HREC). As inspired by nature, an algorithm is presented that constructs a cellular automaton that recognizes strings from a language in the HREC family. It is demonstrated how a language recognizer can be implemented from the cellular automaton using a feed-forward network of spiking neurons. This parser recognizes fixed-length strings from the language in parallel and as the computation is pipelined, a new string can be parsed in each new interval of time. The analogy with formal language theory allows inferences to be drawn regarding what class of objects can be recognized by visual cortex operating in purely feed-forward fashion and what class of objects requires a more complicated network architecture.

  3. From binaries to multiples. II. Hierarchical multiplicity of F and G dwarfs

    SciTech Connect (OSTI)

    Tokovinin, Andrei

    2014-04-01

    Statistics of hierarchical multiplicity among solar-type dwarfs are studied using the distance-limited sample of 4847 targets presented in the accompanying Paper I. Known facts about binaries (multiplicity fraction 0.46, lognormal period distribution with median period 100 yr and logarithmic dispersion 2.4, and nearly uniform mass-ratio distribution independent of the period) are confirmed with a high statistical significance. The fraction of hierarchies with three or more components is 0.13 0.01, and the fractions of targets with n = 1, 2, 3, ... components are 54:33:8:4:1. Subsystems in the secondary components are almost as frequent as in the primary components, but in half of such cases both inner pairs are present. The high frequency of those 2+2 hierarchies (4%) suggests that both inner pairs were formed by a common process. The statistics of hierarchies can be reproduced by simulations, assuming that the field is a mixture coming from binary-rich and binary-poor environments. Periods of the outer and inner binaries are selected recursively from the same lognormal distribution, subject to the stability constraint and accounting for the correlation between inner subsystems. The simulator can be used to evaluate the frequency of multiple systems with specified parameters. However, it does not reproduce the observed excess of inner periods shorter than 10 days, caused by tidal evolution.

  4. Multiple shock initiation of LX-17

    SciTech Connect (OSTI)

    Tarver, C.M.; Cook, T.M.; Urtiew, P.A.; Tao, W.C.

    1993-07-01

    The response of the insensitive TATB-based high explosive LX-17 to multiple shock impacts is studied experimentally in a four inch gas gun using embedded manganin gauges and numerically using the ignition and growth reactive flow model of shock initiation and detonation. Pressure histories are reported for LX-17 cylinders which are subjected to sustained shock pulses followed by secondary compressions from shocks reflected from metal discs attached to the backs of the explosive targets. These measured and calculated pressure histories show that the threshold for hot spot growth in LX-17 is 7 GPa, that LX-17 can be dead pressed at slightly lower pressures, and that the reaction rates behind reflected shocks increase greatly as the impedance of the metal increases. A study of the response of LX-17 to the collision of two reacting, diverging shocks forming a Mach stem wave inside the LX-17 charge demonstrated that this interaction can result in a high pressure region of sufficient size and strength to cause detonation under certain conditions.

  5. Permeation absorption sampler with multiple detection

    DOE Patents [OSTI]

    Zaromb, Solomon

    1990-01-01

    A system for detecting analytes in air or aqueous systems includes a permeation absorption preconcentrator sampler for the analytes and analyte detectors. The preconcentrator has an inner fluid-permeable container into which a charge of analyte-sorbing liquid is intermittently injected, and a fluid-impermeable outer container. The sample is passed through the outer container and around the inner container for trapping and preconcentrating the analyte in the sorbing liquid. The analyte can be detected photometrically by injecting with the sorbing material a reagent which reacts with the analyte to produce a characteristic color or fluorescence which is detected by illuminating the contents of the inner container with a light source and measuring the absorbed or emitted light, or by producing a characteristic chemiluminescence which can be detected by a suitable light sensor. The analyte can also be detected amperometrically. Multiple inner containers may be provided into which a plurality of sorbing liquids are respectively introduced for simultaneously detecting different analytes. Baffles may be provided in the outer container. A calibration technique is disclosed.

  6. Multiple capillary biochemical analyzer with barrier member

    DOE Patents [OSTI]

    Dovichi, Norman J.; Zhang, Jian Z.

    1996-01-01

    A multiple capillary biochemical analyzer for sequencing DNA and performing other analyses, in which a set of capillaries extends from wells in a microtiter plate into a cuvette. In the cuvette the capillaries are held on fixed closely spaced centers by passing through a sandwich construction having a pair of metal shims which squeeze between them a rubber gasket, forming a leak proof seal for an interior chamber in which the capillary ends are positioned. Sheath fluid enters the chamber and entrains filament sample streams from the capillaries. The filament sample streams, and sheath fluid, flow through aligned holes in a barrier member spaced close to the capillary ends, into a collection chamber having a lower glass window. The filament streams are illuminated above the barrier member by a laser, causing them to fluoresce. The fluorescence is viewed end-on by a CCD camera chip located below the glass window. The arrangement ensures an equal optical path length from all fluorescing spots to the CCD chip and also blocks scattered fluorescence illumination, providing more uniform results and an improved signal to noise ratio.

  7. Multiple capillary biochemical analyzer with barrier member

    DOE Patents [OSTI]

    Dovichi, N.J.; Zhang, J.Z.

    1996-10-22

    A multiple capillary biochemical analyzer is disclosed for sequencing DNA and performing other analyses, in which a set of capillaries extends from wells in a microtiter plate into a cuvette. In the cuvette the capillaries are held on fixed closely spaced centers by passing through a sandwich construction having a pair of metal shims which squeeze between them a rubber gasket, forming a leak proof seal for an interior chamber in which the capillary ends are positioned. Sheath fluid enters the chamber and entrains filament sample streams from the capillaries. The filament sample streams, and sheath fluid, flow through aligned holes in a barrier member spaced close to the capillary ends, into a collection chamber having a lower glass window. The filament streams are illuminated above the barrier member by a laser, causing them to fluoresce. The fluorescence is viewed end-on by a CCD camera chip located below the glass window. The arrangement ensures an equal optical path length from all fluorescing spots to the CCD chip and also blocks scattered fluorescence illumination, providing more uniform results and an improved signal-to-noise ratio. 12 figs.

  8. Knowledge Framework Implementation with Multiple Architectures - 13090

    SciTech Connect (OSTI)

    Upadhyay, H.; Lagos, L.; Quintero, W.; Shoffner, P.; DeGregory, J.

    2013-07-01

    Multiple kinds of knowledge management systems are operational in public and private enterprises, large and small organizations with a variety of business models that make the design, implementation and operation of integrated knowledge systems very difficult. In recent days, there has been a sweeping advancement in the information technology area, leading to the development of sophisticated frameworks and architectures. These platforms need to be used for the development of integrated knowledge management systems which provides a common platform for sharing knowledge across the enterprise, thereby reducing the operational inefficiencies and delivering cost savings. This paper discusses the knowledge framework and architecture that can be used for the system development and its application to real life need of nuclear industry. A case study of deactivation and decommissioning (D and D) is discussed with the Knowledge Management Information Tool platform and framework. D and D work is a high priority activity across the Department of Energy (DOE) complex. Subject matter specialists (SMS) associated with DOE sites, the Energy Facility Contractors Group (EFCOG) and the D and D community have gained extensive knowledge and experience over the years in the cleanup of the legacy waste from the Manhattan Project. To prevent the D and D knowledge and expertise from being lost over time from the evolving and aging workforce, DOE and the Applied Research Center (ARC) at Florida International University (FIU) proposed to capture and maintain this valuable information in a universally available and easily usable system. (authors)

  9. Nanoparticles modified with multiple organic acids

    DOE Patents [OSTI]

    Cook, Ronald Lee; Luebben, Silvia DeVito; Myers, Andrew William; Smith, Bryan Matthew; Elliott, Brian John; Kreutzer, Cory; Wilson, Carolina; Meiser, Manfred

    2007-07-17

    Surface-modified nanoparticles of boehmite, and methods for preparing the same. Aluminum oxyhydroxide nanoparticles are surface modified by reaction with selected amounts of organic acids. In particular, the nanoparticle surface is modified by reactions with two or more different carboxylic acids, at least one of which is an organic carboxylic acid. The product is a surface modified boehmite nanoparticle that has an inorganic aluminum oxyhydroxide core, or part aluminum oxyhydroxide core and a surface-bonded organic shell. Organic carboxylic acids of this invention contain at least one carboxylic acid group and one carbon-hydrogen bond. One embodiment of this invention provides boehmite nanoparticles that have been surface modified with two or more acids one of which additional carries at least one reactive functional group. Another embodiment of this invention provides boehmite nanoparticles that have been surface modified with multiple acids one of which has molecular weight or average molecular weight greater than or equal to 500 Daltons. Yet, another embodiment of this invention provides boehmite nanoparticles that are surface modified with two or more acids one of which is hydrophobic in nature and has solubility in water of less than 15 by weight. The products of the methods of this invention have specific useful properties when used in mixture with liquids, as filler in solids, or as stand-alone entities.

  10. Multiple connection for an undersea cable system

    SciTech Connect (OSTI)

    Guazzo, L.; Trezeguet, J.P.

    1984-05-08

    A multiple connection is claimed for connecting a plurality of armored cables to the housing of electrical apparatus in an undersea system having a cable interconnection point where a plurality of cables serving different destinations are brought together. Each of these cables comprise a core surrounded by armor and are terminated by a length of bared core extending beyond a severed end of the armor. The housing has a hollow cable-fixing part through which the bared cable cores pass, characterized in that said connection comprises: a steel binding ring through which the armored portion of each of said cables, is threaded, said ring serving to bind said armored portions of cable together; a steel tube threaded over said bared cores of said cables, having one end abutting against severed end portions of the armor of said cables and having its other end fixed mechanically to said hollow cable-fixing part of the electrical apparatus housing; and auxiliary armor wound around the portions of armored cable bound together by said ring and around the adjacent portion of said steel tube.

  11. Selected Translated Abstracts of Chinese-Language Climate Change Publications

    SciTech Connect (OSTI)

    Cushman, R.M.; Burtis, M.D.

    1999-05-01

    This report contains English-translated abstracts of important Chinese-language literature concerning global climate change for the years 1995-1998. This body of literature includes the topics of adaptation, ancient climate change, climate variation, the East Asia monsoon, historical climate change, impacts, modeling, and radiation and trace-gas emissions. In addition to the biological citations and abstracts translated into English, this report presents the original citations and abstracts in Chinese. Author and title indexes are included to assist the reader in locating abstracts of particular interest.

  12. SBOL Visual: A Graphical Language for Genetic Designs

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Quinn, Jacqueline Y.; Cox, Robert Sidney; Adler, Aaron; Beal, Jacob; Bhatia, Swapnil; Cai, Yizhi; Chen, Joanna; Clancy, Kevin; Galdzicki, Michal; Hillson, Nathan J.; et al

    2015-12-03

    Synthetic Biology Open Language (SBOL) Visual is a graphical standard for genetic engineering. We report that it consists of symbols representing DNA subsequences, including regulatory elements and DNA assembly features. These symbols can be used to draw illustrations for communication and instruction, and as image assets for computer-aided design. SBOL Visual is a community standard, freely available for personal, academic, and commercial use (Creative Commons CC0 license). We provide prototypical symbol images that have been used in scientific publications and software tools. We encourage users to use and modify them freely, and to join the SBOL Visual community: http://www.sbolstandard.org/visual.

  13. Spin-orbit interaction in multiple quantum wells

    SciTech Connect (OSTI)

    Hao, Ya-Fei

    2015-01-07

    In this paper, we investigate how the structure of multiple quantum wells affects spin-orbit interactions. To increase the interface-related Rashba spin splitting and the strength of the interface-related Rashba spin-orbit interaction, we designed three kinds of multiple quantum wells. We demonstrate that the structure of the multiple quantum wells strongly affected the interface-related Rashba spin-orbit interaction, increasing the interface-related Rashba spin splitting to up to 26% larger in multiple quantum wells than in a stepped quantum well. We also show that the cubic Dresselhaus spin-orbit interaction similarly influenced the spin relaxation time of multiple quantum wells and that of a stepped quantum well. The increase in the interface-related Rashba spin splitting originates from the relationship between interface-related Rashba spin splitting and electron probability density. Our results suggest that multiple quantum wells can be good candidates for spintronic devices.

  14. U-035: Adobe Flash Player Multiple Vulnerabilities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    35: Adobe Flash Player Multiple Vulnerabilities U-035: Adobe Flash Player Multiple Vulnerabilities November 14, 2011 - 10:15am Addthis PROBLEM: Adobe Flash Player Multiple Vulnerabilities. PLATFORM: Adobe Flash Player 11.0.1.152 and earlier versions for Windows, Macintosh, Linux and Solaris operating systems Adobe Flash Player 11.0.1.153 and earlier versions for Android Adobe AIR 3.0 and earlier versions for Windows, Macintosh, and Android ABSTRACT: Adobe recommends users of Adobe Flash Player

  15. U-198: IBM Lotus Expeditor Multiple Vulnerabilities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    8: IBM Lotus Expeditor Multiple Vulnerabilities U-198: IBM Lotus Expeditor Multiple Vulnerabilities June 25, 2012 - 7:00am Addthis PROBLEM: Multiple vulnerabilities have been reported in IBM Lotus Expeditor. PLATFORM: IBM Lotus Expeditor 6.x ABSTRACT: The vulnerabilities can be exploited by malicious people to conduct cross-site scripting attacks, disclose potentially sensitive information, bypass certain security restrictions, and compromise a user's system.. Reference Links: Vendor Advisory

  16. Organic light emitting device having multiple separate emissive layers

    DOE Patents [OSTI]

    Forrest, Stephen R. (Ann Arbor, MI)

    2012-03-27

    An organic light emitting device having multiple separate emissive layers is provided. Each emissive layer may define an exciton formation region, allowing exciton formation to occur across the entire emissive region. By aligning the energy levels of each emissive layer with the adjacent emissive layers, exciton formation in each layer may be improved. Devices incorporating multiple emissive layers with multiple exciton formation regions may exhibit improved performance, including internal quantum efficiencies of up to 100%.

  17. Multiple Motivations Institutional Change Principle | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Institutional Change » Multiple Motivations Institutional Change Principle Multiple Motivations Institutional Change Principle The multiple motivations principle suggests that a portfolio approach-rather than a single strategy-may be required to achieve change. Research demonstrates that people and institutions adopt new behaviors for many reasons. They likely need more than one reason for changing their current behavior. Therefore, people may shift to more sustainable, energy-efficient

  18. Control of Multiple Robotic Sentry Vehicles

    SciTech Connect (OSTI)

    Feddema, J.; Klarer, P.; Lewis, C.

    1999-04-01

    As part of a project for the Defense Advanced Research Projects Agency, Sandia National Laboratories is developing and testing the feasibility of using of a cooperative team of robotic sentry vehicles to guard a perimeter and to perform surround and diversion tasks. This paper describes on-going activities in the development of these robotic sentry vehicles. To date, we have developed a robotic perimeter detection system which consists of eight ''Roving All Terrain Lunar Explorer Rover'' (RATLER{trademark}) vehicles, a laptop-based base-station, and several Miniature Intrusion Detection Sensors (MIDS). A radio frequency receiver on each of the RATLER vehicles alerts the sentry vehicles of alarms from the hidden MIDS. When an alarm is received, each vehicle decides whether it should investigate the alarm based on the proximity of itself and the other vehicles to the alarm. As one vehicle attends an alarm, the other vehicles adjust their position around the perimeter to better prepare for another alarm. We have also demonstrated the ability to drive multiple vehicles in formation via tele-operation or by waypoint GPS navigation. This is currently being extended to include mission planning capabilities. At the base-station, the operator can draw on an aerial map the goal regions to be surrounded and the repulsive regions to be avoided. A potential field path planner automatically generates a path from the vehicles' current position to the goal regions while avoiding the repulsive regions and the other vehicles. This path is previewed to the operator before the regions are downloaded to the vehicles. The same potential field path planner resides on the vehicle, except additional repulsive forces from on-board proximity sensors guide the vehicle away from unplanned obstacles.

  19. Direct imaging of multiple planets orbiting the star HR 8799...

    Office of Scientific and Technical Information (OSTI)

    Direct imaging of multiple planets orbiting the star HR 8799 Citation Details In-Document ... Resource Type: Journal Article Resource Relation: Journal Name: Science, vol. 322, no. ...

  20. Characterization of Tritium Breeding Ratio and Energy Multiplication...

    Office of Scientific and Technical Information (OSTI)

    Factor of Lithium-based Ternary Alloys in IFE Blankets Citation Details In-Document Search Title: Characterization of Tritium Breeding Ratio and Energy Multiplication Factor of ...

  1. V-043: Perl Locale::Maketext Module '_compile()' Multiple Code...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    V-043: Perl Locale::Maketext Module 'compile()' Multiple Code Injection Vulnerabilities ... Arbitrary Code and View Arbitrary Files V-002: EMC NetWorker Module for Microsoft ...

  2. Efficient merging of data from multiple samples for determination...

    Office of Scientific and Technical Information (OSTI)

    Title: Efficient merging of data from multiple samples for determination of anomalous substructure Authors: Akey, David L. ; Terwilliger, Thomas C. ; Smith, Janet L. 1 ; LANL) ...

  3. Complex matrix multiplication operations with data pre-conditioning...

    Office of Scientific and Technical Information (OSTI)

    operand of the complex matrix multiplication operation to a first target vector register. ... and replicate the second complex vector value within a second target vector register. ...

  4. Matrix multiplication operations with data pre-conditioning in...

    Office of Scientific and Technical Information (OSTI)

    vector operand of the matrix multiplication operation to a first target vector register. ... the element to each of a plurality of elements of a second target vector register. ...

  5. V-107: Wireshark Multiple Denial of Service Vulnerabilities

    Broader source: Energy.gov [DOE]

    Multiple vulnerabilities have been reported in Wireshark, which can be exploited by malicious people to cause a DoS (Denial of Service).

  6. Multiple-Award Contracts and Governmentwide Acquisition Contracts...

    Office of Environmental Management (EM)

    Chapter 16.5 (May 2011) 1 Multiple-Award Contracts and Governmentwide Acquisition Contracts Including Delivery Orders and Task Orders References Federal Acquisition Regulation ...

  7. ALS Capabilities Reveal Multiple Functions of Ebola Virus

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reveal Multiple Functions of Ebola Virus Print A central dogma of molecular biology is that a protein's sequence dictates its fold, and the fold dictates its function....

  8. T-681:IBM Lotus Symphony Multiple Unspecified Vulnerabilities

    Broader source: Energy.gov [DOE]

    Multiple unspecified vulnerabilities in IBM Lotus Symphony 3 before FP3 have unknown impact and attack vectors, related to "critical security vulnerability issues."

  9. Intrinsic carrier multiplication efficiency in bulk Si crystals...

    Office of Scientific and Technical Information (OSTI)

    We estimated the carrier multiplication efficiency in the most common solar-cell material, ... of carriers quantitatively, which are crucial for the design of the solar cells. ...

  10. Matrix multiplication operations with data pre-conditioning in...

    Office of Scientific and Technical Information (OSTI)

    with data pre-conditioning in a high performance computing architecture Citation Details In-Document Search Title: Matrix multiplication operations with data ...

  11. Building multiple adsorption sites in porous polymer networks...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building multiple adsorption sites in porous polymer networks for carbon capture applications Previous Next List Weigang Lu, Wolfgang M. Verdegaal, Jiamei Yu, Perla B Balbuena,...

  12. U-277: Google Chrome Multiple Flaws Let Remote Users Execute...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Addthis PROBLEM: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code PLATFORM: Version(s): prior to 22.0.1229.92 ABSTRACT: Several vulnerabilities were...

  13. V-145: IBM Tivoli Federated Identity Manager Products Java Multiple...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    V-145: IBM Tivoli Federated Identity Manager Products Java Multiple Vulnerabilities April 30, 2013 - 12:09am Addthis PROBLEM: IBM Tivoli Federated Identity Manager Products Java ...

  14. Matrix multiplication operations with data pre-conditioning in...

    Office of Scientific and Technical Information (OSTI)

    Matrix multiplication operations with data pre-conditioning in a high performance computing architecture Eichenberger, Alexandre E; Gschwind, Michael K; Gunnels, John A Mechanisms...

  15. Frequency domain quantum optimal control under multiple constraints...

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Search Results Journal Article: Frequency domain quantum optimal control under multiple constraints Citation Details In-Document Search This content will become ...

  16. AltaRock Energy Announces Successful Multiple-Zone Stimulation...

    Energy Savers [EERE]

    Geothermal Systems Demonstration AltaRock Energy Announces Successful Multiple-Zone Stimulation of Well at the Newberry Enhanced Geothermal Systems Demonstration January 22, 2013 - ...

  17. Multiple pass and multiple layer friction stir welding and material enhancement processes

    DOE Patents [OSTI]

    Feng, Zhili [Knoxville, TN; David, Stan A. [Knoxville, TN; Frederick, David Alan [Harriman, TN

    2010-07-27

    Processes for friction stir welding, typically for comparatively thick plate materials using multiple passes and multiple layers of a friction stir welding tool. In some embodiments a first portion of a fabrication preform and a second portion of the fabrication preform are placed adjacent to each other to form a joint, and there may be a groove adjacent the joint. The joint is welded and then, where a groove exists, a filler may be disposed in the groove, and the seams between the filler and the first and second portions of the fabrication preform may be friction stir welded. In some embodiments two portions of a fabrication preform are abutted to form a joint, where the joint may, for example, be a lap joint, a bevel joint or a butt joint. In some embodiments a plurality of passes of a friction stir welding tool may be used, with some passes welding from one side of a fabrication preform and other passes welding from the other side of the fabrication preform.

  18. Aspen: A Domain Specific Language for Performance Modeling

    SciTech Connect (OSTI)

    Spafford, Kyle L; Vetter, Jeffrey S

    2012-01-01

    We present a new approach to analytical performance modeling using Aspen, a domain specific language. Aspen (Abstract Scalable Performance Engineering Notation) fills an important gap in existing performance modeling techniques and is designed to enable rapid exploration of new algorithms and architectures. It includes a formal specification of an application's performance behavior and an abstract machine model. We provide an overview of Aspen's features and demonstrate how it can be used to express a performance model for a three dimensional Fast Fourier Transform. We then demonstrate the composability and modularity of Aspen by importing and reusing the FFT model in a molecular dynamics model. We have also created a number of tools that allow scientists to balance application and system factors quickly and accurately.

  19. Towards a Semantic Lexicon for Biological Language Processing

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Verspoor, Karin

    2005-01-01

    This paper explores the use of the resources in the National Library of Medicine's Unified Medical Language System (UMLS) for the construction of a lexicon useful for processing texts in the field of molecular biology. A lexicon is constructed from overlapping terms in the UMLS SPECIALIST lexicon and the UMLS Metathesaurus to obtain both morphosyntactic and semantic information for terms, and the coverage of a domain corpus is assessed. Over 77% of tokens in the domain corpus are found in the constructed lexicon, validating the lexicon's coverage of the most frequent terms in the domain and indicating that the constructedmore » lexicon is potentially an important resource for biological text processing.« less

  20. V-145: IBM Tivoli Federated Identity Manager Products Java Multiple

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vulnerabilities | Department of Energy 45: IBM Tivoli Federated Identity Manager Products Java Multiple Vulnerabilities V-145: IBM Tivoli Federated Identity Manager Products Java Multiple Vulnerabilities April 30, 2013 - 12:09am Addthis PROBLEM: IBM Tivoli Federated Identity Manager Products Java Multiple Vulnerabilities PLATFORM: IBM Tivoli Federated Identity Manager versions 6.1, 6.2.0, 6.2.1, and 6.2.2. IBM Tivoli Federated Identity Manager Business Gateway versions 6.1.1, 6.2.0, 6.2.1

  1. U-162: Drupal Multiple Vulnerabilities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2: Drupal Multiple Vulnerabilities U-162: Drupal Multiple Vulnerabilities May 4, 2012 - 7:00am Addthis PROBLEM: Drupal Multiple Vulnerabilities PLATFORM: The vulnerabilities are reported in 7.x versions prior to 7.13. ABSTRACT: Several vulnerabilities were reported in Drupal: Denial of Service, Access bypass, and Unvalidated form redirect reference LINKS: Security Advisory: DRUPAL-SA-CORE-2012-002 Bugtraq ID: 53359 Secunia Advisory SA49012 CVE-2012-1588 CVE-2012-1589 CVE-2012-1590 CVE-2012-1591

  2. U-191: Oracle Java Multiple Vulnerabilities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1: Oracle Java Multiple Vulnerabilities U-191: Oracle Java Multiple Vulnerabilities June 14, 2012 - 7:00am Addthis PROBLEM: Multiple vulnerabilities have been reported in Oracle Java, which can be exploited by malicious local users PLATFORM: Oracle Java JDK 1.7.x / 7.x Oracle Java JRE 1.7.x / 7.x Sun Java JDK 1.5.x Sun Java JDK 1.6.x / 6.x Sun Java JRE 1.4.x Sun Java JRE 1.5.x / 5.x Sun Java JRE 1.6.x / 6.x Sun Java SDK 1.4.x ABSTRACT: The Critical Patch Update for Java SE also includes

  3. Stator for a rotating electrical machine having multiple control windings

    DOE Patents [OSTI]

    Shah, Manoj R.; Lewandowski, Chad R.

    2001-07-17

    A rotating electric machine is provided which includes multiple independent control windings for compensating for rotor imbalances and for levitating/centering the rotor. The multiple independent control windings are placed at different axial locations along the rotor to oppose forces created by imbalances at different axial locations along the rotor. The multiple control windings can also be used to levitate/center the rotor with a relatively small magnetic field per unit area since the rotor and/or the main power winding provides the bias field.

  4. The tyranny of the vital few : the Pareto principle in language design.

    SciTech Connect (OSTI)

    Siy, Harvey; Perry, James; McCoy, James Andrew; Winter, Victor Lono; Farkas, Benjamin D.; Srinivasan, Satish

    2010-08-01

    Modern high-level programming languages often contain constructs whose semantics are non-trivial. In practice however, software developers generally restrict the use of such constructs to settings in which their semantics is simple (programmers use language constructs in ways they understand and can reason about). As a result, when developing tools for analyzing and manipulating software, a disproportionate amount of effort ends up being spent developing capabilities needed to analyze constructs in settings that are infrequently used. This paper takes the position that such distinctions between theory and practice are an important measure of the analyzability of a language.

  5. V-096: Mozilla Thunderbird / SeaMonkey Multiple Vulnerabilities

    Broader source: Energy.gov [DOE]

    A weakness and multiple vulnerabilities have been reported in Mozilla Thunderbird and SeaMonkey, which can be exploited by malicious people to disclose potentially sensitive information, conduct spoofing attacks, bypass certain security restrictions, and compromise a user's system.

  6. T-542: SAP Crystal Reports Server Multiple Vulnerabilities

    Office of Energy Efficiency and Renewable Energy (EERE)

    Multiple vulnerabilities in SAP Crystal Reports Server 2008, which can be exploited by malicious users to disclose potentially sensitive information and by malicious people to conduct cross-site scripting attacks, manipulate certain data, and compromise a user's system.

  7. U-171: DeltaV Products Multiple Vulnerabilities

    Broader source: Energy.gov [DOE]

    Multiple vulnerabilities have been reported in DeltaV products, which can be exploited by malicious people to conduct cross-site scripting attacks, SQL injection attacks, cause a DoS (Denial of Service), and compromise a vulnerable system.

  8. Wind Power Forecasting Error Distributions over Multiple Timescales: Preprint

    SciTech Connect (OSTI)

    Hodge, B. M.; Milligan, M.

    2011-03-01

    In this paper, we examine the shape of the persistence model error distribution for ten different wind plants in the ERCOT system over multiple timescales. Comparisons are made between the experimental distribution shape and that of the normal distribution.

  9. Theory of Multiple Coulomb Scattering from Extended Nuclei

    DOE R&D Accomplishments [OSTI]

    Cooper, L. N.; Rainwater, J.

    1954-08-01

    Two independent methods are described for calculating the multiple scattering distribution for projected angle scattering resulting when very high energy charged particles traverse a thick scatterer. The results are compared with the theories of Moliere and Olbert.

  10. V-132: IBM Tivoli System Automation Application Manager Multiple...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Application Manager versions 3.1, 3.2, 3.2.1, and 3.2.2 ABSTRACT: Multiple security vulnerabilities exist in the IBM Java Runtime Environment component of IBM Tivoli System ...