Sample records for monitoring software tool

  1. Software tools for the graphic designer

    E-Print Network [OSTI]

    Henigan, Nardy

    1983-01-01T23:59:59.000Z

    This thesis describes three packages of programs of interest to the graphic designers: (l) a tool for pointing at objects on the display monitor, (2) a tool for organizing sets of programs into interactive menus, and (3) ...

  2. DEVELOPMENT OF A SOFTWARE DESIGN TOOL FOR

    Broader source: Energy.gov [DOE]

    This project focuses on the development of a stand-alone software tool for the design and economic analysis of hybrid geothermal heat pump systems for heating-and cooling dominated buildings using solar collectors in both operating modes.

  3. DEVICE CONTROL TOOL FOR CEBAF BEAM DIAGNOSTICS SOFTWARE

    SciTech Connect (OSTI)

    Pavel Chevtsov

    2008-02-11T23:59:59.000Z

    Continuously monitoring the beam quality in the CEBAF accelerator, a variety of beam diagnostics software created at Jefferson Lab makes a significant contribution to very high availability of the machine for nuclear physics experiments. The interface between this software and beam instrumentation hardware components is provided by a device control tool, which is optimized for beam diagnostics tasks. As a part of the device/driver development framework at Jefferson Lab, this tool is very easy to support and extend to integrate new beam instrumentation components. All device control functions are based on the configuration (ASCII text) files that completely define the used hardware interface standards (CAMAC, VME, RS-232, GPIB, etc.) and communication protocols. The paper presents the main elements of the device control tool for beam diagnostics software at Jefferson Lab.

  4. Monitoring Software using Sun Spots Corey Andalora

    E-Print Network [OSTI]

    Kaminsky, Alan

    a software application developed for demonstrating a monitoring network for air conditioning units their findings to a central data store. Air conditioning units were the equipment selected for monitoring. Air conditioning units vibrate while operating so they were an obvious choice to use with the accelerometers

  5. SUSTAINABLE REMEDIATION SOFTWARE TOOL EXERCISE AND EVALUATION

    SciTech Connect (OSTI)

    Kohn, J.; Nichols, R.; Looney, B.

    2011-05-12T23:59:59.000Z

    The goal of this study was to examine two different software tools designed to account for the environmental impacts of remediation projects. Three case studies from the Savannah River Site (SRS) near Aiken, SC were used to exercise SiteWise (SW) and Sustainable Remediation Tool (SRT) by including both traditional and novel remediation techniques, contaminants, and contaminated media. This study combined retrospective analysis of implemented projects with prospective analysis of options that were not implemented. Input data were derived from engineering plans, project reports, and planning documents with a few factors supplied from calculations based on Life Cycle Assessment (LCA). Conclusions drawn from software output were generally consistent within a tool; both tools identified the same remediation options as the 'best' for a given site. Magnitudes of impacts varied between the two tools, and it was not always possible to identify the source of the disagreement. The tools differed in their quantitative approaches: SRT based impacts on specific contaminants, media, and site geometry and modeled contaminant removal. SW based impacts on processes and equipment instead of chemical modeling. While SW was able to handle greater variety in remediation scenarios, it did not include a measure of the effectiveness of the scenario.

  6. Software Interoperability Tools: Standardized Capability-Profiling Methodology ISO16100

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Software Interoperability Tools: Standardized Capability-Profiling Methodology ISO16100 Michiko, qwang@seu.ac.jp Abstract. The ISO 16100 series has been developed for Manufacturing software for developing general software applications including enterprise applications. In this paper, ISO 16100

  7. Use of Continuous Integration Tools for Application Performance Monitoring

    SciTech Connect (OSTI)

    Vergara Larrea, Veronica G [ORNL; Joubert, Wayne [ORNL; Fuson, Christopher B [ORNL

    2015-01-01T23:59:59.000Z

    High performance computing systems are becom- ing increasingly complex, both in node architecture and in the multiple layers of software stack required to compile and run applications. As a consequence, the likelihood is increasing for application performance regressions to occur as a result of routine upgrades of system software components which interact in complex ways. The purpose of this study is to evaluate the effectiveness of continuous integration tools for application performance monitoring on HPC systems. In addition, this paper also describes a prototype system for application perfor- mance monitoring based on Jenkins, a Java-based continuous integration tool. The monitoring system described leverages several features in Jenkins to track application performance results over time. Preliminary results and lessons learned from monitoring applications on Cray systems at the Oak Ridge Leadership Computing Facility are presented.

  8. Energy Monitoring of Software project-team

    E-Print Network [OSTI]

    Lefèvre, Laurent

    Energy Monitoring of Software Systems project-team Romain Rouvoy Aurélien Bourdon Adel Noureddine Lionel Seinturier firstname.lastname@inria.fr #12;ICT & Energy 2% of the global energy consumption in 2007 [1] [1] Gartner #12;ICT & Energy [1] 2008 ICT report, Ecology Ministry 13.5% of the electricity

  9. Software Modeling of S-Metrics Visualizer: Synergetic Interactive Metrics Visualization Tool

    E-Print Network [OSTI]

    Dascalu, Sergiu

    utilization, earned-value cost and schedule performance) to provide enhanced management insight in a timely and visualization tool for Windows. Throughout the software development process managers must be aware problems that occur throughout the project's evolution. Software metrics help managers to better monitor

  10. Sandia software guidelines: Volume 5, Tools, techniques, and methodologies

    SciTech Connect (OSTI)

    Not Available

    1989-07-01T23:59:59.000Z

    This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. This volume describes software tools and methodologies available to Sandia personnel for the development of software, and outlines techniques that have proven useful within the Laboratories and elsewhere. References and evaluations by Sandia personnel are included. 6 figs.

  11. The Node Monitoring Component of a Scalable Systems Software Environment

    SciTech Connect (OSTI)

    Samuel James Miller

    2006-08-09T23:59:59.000Z

    This research describes Fountain, a suite of programs used to monitor the resources of a cluster. A cluster is a collection of individual computers that are connected via a high speed communication network. They are traditionally used by users who desire more resources, such as processing power and memory, than any single computer can provide. A common drawback to effectively utilizing such a large-scale system is the management infrastructure, which often does not often scale well as the system grows. Large-scale parallel systems provide new research challenges in the area of systems software, the programs or tools that manage the system from boot-up to running a parallel job. The approach presented in this thesis utilizes a collection of separate components that communicate with each other to achieve a common goal. While systems software comprises a broad array of components, this thesis focuses on the design choices for a node monitoring component. We will describe Fountain, an implementation of the Scalable Systems Software (SSS) node monitor specification. It is targeted at aggregate node monitoring for clusters, focusing on both scalability and fault tolerance as its design goals. It leverages widely used technologies such as XML and HTTP to present an interface to other components in the SSS environment.

  12. EISA 432 Energy Audits Best Practices: Software Tools

    SciTech Connect (OSTI)

    Maryl Fisher

    2014-11-01T23:59:59.000Z

    Five whole building analysis software tools that can aid an energy manager with fulfilling energy audit and commissioning/retro-commissioning requirements were selected for review in this best practices study. A description of each software tool is provided as well as a discussion of the user interface and level of expertise required for each tool, a review of how to use the tool for analyzing energy conservation opportunities, the format and content of reports generated by the tool, and a discussion on the applicability of the tool for commissioning.

  13. Tools to Boost Steam System Efficiency, Software Tools for Industry, Industrial Technologies Program (ITP) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2008-12-01T23:59:59.000Z

    This fact sheet describes how the Industrial Technologies Program steam software tools can help industrial plants identify steam system improvements to save energy and money.

  14. MPS Vax monitor and control software architecture

    SciTech Connect (OSTI)

    Allison, S.; Spencer, N.; Underwood, K.; VanOlst, D.; Zelanzy, M.

    1993-04-01T23:59:59.000Z

    The new Machine Protection System (MPS) now being tested at the SLAC Linear Collider (SLC) includes monitoring and controlling facilities integrated into the existing VAX control system. The actual machine protection is performed by VME micros which control the beam repetition rate on a pulse-by-pulse basis based on measurements from fault detectors. The VAX is used to control and configure the VME micros, configure custom CAMAC modules providing the fault detector inputs, monitor and report faults and system errors, update the SLC database, and interface with the user. The design goals of the VAX software include a database-driven system to allow configuration changes without code changes, use of a standard TCP/IP-based message service for communication, use of existing SLCNET micros for CAMAC configuration, security and verification features to prevent unauthorized access, error and alarm logging and display updates as quickly as possible, and use of touch panels and X-windows displays for the user interface.

  15. SHMTools: a general-purpose software tool for SHM applications

    SciTech Connect (OSTI)

    Harvey, Dustin [Los Alamos National Laboratory; Farrar, Charles [Los Alamos National Laboratory; Taylor, Stuart [Los Alamos National Laboratory; Park, Gyuhae [Los Alamos National Laboratory; Flynn, Eric B [UCSD; Kpotufe, Samory [UCSD; Dondi, Denis [UCSD; Mollov, Todor [UCSD; Todd, Michael D [UCSD; Rosin, Tajana S [UCSD; Figueiredo, Eloi [UNIV OF PORTO, PORTUGAL

    2010-11-30T23:59:59.000Z

    This paper describes a new software package for various structural health monitoring (SHM) applications. The software is a set of standardized MATLAB routines covering three main stages of SHM: data acquisition, feature extraction, and feature classification for damage identification. A subset of the software in SHMTools is embeddable, which consists of Matlab functions that can be cross-compiled into generic 'C' programs to be run on a target hardware. The software is also designed to accommodate multiple sensing modalities, including piezoelectric active-sensing, which has been widely used in SHM practice. The software package, including standardized datasets, are publicly available for use by the SHM community. The details of this embeddable software will be discussed, along with several example processes that can be used for guidelines for future use of the software.

  16. AIRMaster+ Software Tool Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube platform is always evolving,Response to Smart(RevisionRetrospectiveofSoftware

  17. Tank monitor and control system (TMACS) software configuration management plan

    SciTech Connect (OSTI)

    GLASSCOCK, J.A.

    1999-05-13T23:59:59.000Z

    This Software Configuration Management Plan (SCMP) describes the methodology for control of computer software developed and supported by the Systems Development and Integration (SD and I) organization of Lockheed Martin Services, Inc. (LMSI) for the Tank Monitor and Control System (TMACS). This plan controls changes to the software and configuration files used by TMACS. The controlled software includes the Gensym software package, Gensym knowledge base files developed for TMACS, C-language programs used by TMACS, the operating system on the production machine, language compilers, and all Windows NT commands and functions which affect the operating environment. The configuration files controlled include the files downloaded to the Acromag and Westronic field instruments.

  18. SCORE: a Scalable Concolic Testing Tool for Reliable Embedded Software

    E-Print Network [OSTI]

    in an automated fashion. One main task of concolic testing is to extract symbolic in- formation from a concrete cases in an automated manner. An alternative approach, concolic (CONCrete + symbOLIC) [17] testing (alsoSCORE: a Scalable Concolic Testing Tool for Reliable Embedded Software Yunho Kim and Moonzoo Kim

  19. Murphy Tools: Utilizing Extracted GUI Models for Industrial Software Testing

    E-Print Network [OSTI]

    Memon, Atif M.

    --graphical user interface; GUI test automation; model extraction; reverse engineering; industrial test environment is a technique for using models as a basis for automated test generation. The industrial adoption of MBTMurphy Tools: Utilizing Extracted GUI Models for Industrial Software Testing Pekka Aho VTT

  20. GenePRIMP: A software quality control tool

    SciTech Connect (OSTI)

    Amrita Pati

    2010-05-05T23:59:59.000Z

    Amrita Pati of the DOE Joint Genome Institute's Genome Biology group describes the software tool GenePRIMP and how it fits into the quality control pipeline for microbial genomics. Further details regarding GenePRIMP appear in a paper published online May 2, 2010 in Nature Methods.

  1. GenePRIMP: A software quality control tool

    ScienceCinema (OSTI)

    Amrita Pati

    2010-09-01T23:59:59.000Z

    Amrita Pati of the DOE Joint Genome Institute's Genome Biology group describes the software tool GenePRIMP and how it fits into the quality control pipeline for microbial genomics. Further details regarding GenePRIMP appear in a paper published online May 2, 2010 in Nature Methods.

  2. Groundwater Monitoring Report Generation Tools - 12005

    SciTech Connect (OSTI)

    Lopez, Natalie [Savannah River Nuclear Solutions LLC, Aiken, South Carolina, 29808 (United States)

    2012-07-01T23:59:59.000Z

    Compliance with National and State environmental regulations (e.g. Resource Conservation and Recovery Act (RCRA) and Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) aka SuperFund) requires Savannah River Site (SRS) to extensively collect and report groundwater monitoring data, with potential fines for missed reporting deadlines. Several utilities have been developed at SRS to facilitate production of the regulatory reports which include maps, data tables, charts and statistics. Components of each report are generated in accordance with complex sets of regulatory requirements specific to each site monitored. SRS developed a relational database to incorporate the detailed reporting rules with the groundwater data, and created a set of automation tools to interface with the information and generate the report components. These process improvements enhanced quality and consistency by centralizing the information, and have reduced manpower and production time through automated efficiencies. (author)

  3. GROUNDWATER MONITORING REPORT GENERATION TOOLS - 12005

    SciTech Connect (OSTI)

    Lopez, N.

    2011-11-21T23:59:59.000Z

    Compliance with National and State environmental regulations (e.g. Resource Conservation and Recovery Act (RCRA) and Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) aka SuperFund) requires Savannah River Site (SRS) to extensively collect and report groundwater monitoring data, with potential fines for missed reporting deadlines. Several utilities have been developed at SRS to facilitate production of the regulatory reports which include maps, data tables, charts and statistics. Components of each report are generated in accordance with complex sets of regulatory requirements specific to each site monitored. SRS developed a relational database to incorporate the detailed reporting rules with the groundwater data, and created a set of automation tools to interface with the information and generate the report components. These process improvements enhanced quality and consistency by centralizing the information, and have reduced manpower and production time through automated efficiencies.

  4. Westinghouse Waste Simulation and Optimization Software Tool - 13493

    SciTech Connect (OSTI)

    Mennicken, Kim [Westinghouse Electric Germany GmbH, Global Waste Management, Dudenstrasse 44, D-68167 Mannheim (Germany)] [Westinghouse Electric Germany GmbH, Global Waste Management, Dudenstrasse 44, D-68167 Mannheim (Germany); Aign, Joerg [Westinghouse Electric Germany GmbH, Global Waste Management, Tarpenring 6, D-22419 Hamburg (Germany)] [Westinghouse Electric Germany GmbH, Global Waste Management, Tarpenring 6, D-22419 Hamburg (Germany)

    2013-07-01T23:59:59.000Z

    Radioactive waste is produced during NPP operation and NPP D and D. Different kinds of waste with different volumes and properties have to be treated. Finding a technically and commercially optimized waste treatment concept is a difficult and time consuming process. The Westinghouse waste simulation and optimization software tool is an approach to study the total life cycle cost of any waste management facility. The tool enables the user of the simulation and optimization software to plan processes and storage buildings and to identify bottlenecks in the overall waste management design before starting detailed planning activities. Furthermore, application of the software enables the user to optimize the number of treatment systems, to determine the minimum design capacity for onsite storage facilities, to identify bottlenecks in the overall design and to identify the most cost-effective treatment paths by maintaining optimal waste treatment technologies. In combination with proven waste treatment equipment and integrated waste management solutions, the waste simulation and optimization software provides reliable qualitative results that lead to an effective planning and minimization of the total project planning risk of any waste management activity. (authors)

  5. Automated energy monitoring of machine tools

    E-Print Network [OSTI]

    Vijayaraghavan, Athulan; Dornfeld, David

    2010-01-01T23:59:59.000Z

    in manufacturing the tooling for many consumer products,process parameters, tooling, and cutting ?uid based on

  6. RAVEN AS A TOOL FOR DYNAMIC PROBABILISTIC RISK ASSESSMENT: SOFTWARE OVERVIEW

    SciTech Connect (OSTI)

    Alfonsi Andrea; Mandelli Diego; Rabiti Cristian; Joshua Cogliati; Robert Kinoshita

    2013-05-01T23:59:59.000Z

    RAVEN is a software tool under development at the Idaho National Laboratory (INL) that acts as the control logic driver and post-processing tool for the newly developed Thermo-Hydraylic code RELAP- 7. The scope of this paper is to show the software structure of RAVEN and its utilization in connection with RELAP-7. A short overview of the mathematical framework behind the code is presented along with its main capabilities such as on-line controlling/monitoring and Monte-Carlo sampling. A demo of a Station Black Out PRA analysis of a simplified Pressurized Water Reactor (PWR) model is shown in order to demonstrate the Monte-Carlo and clustering capabilities.

  7. A SOFTWARE TOOL TO COMPARE MEASURED AND SIMULATED BUILDING ENERGY PERFORMANCE

    E-Print Network [OSTI]

    LBNL-6184E A SOFTWARE TOOL TO COMPARE MEASURED AND SIMULATED BUILDING ENERGY PERFORMANCE DATA of California. #12;A SOFTWARE TOOL TO COMPARE MEASURED AND SIMULATED BUILDING ENERGY PERFORMANCE DATA Tobias and simulated performance data. In context of this method, we developed a software tool that provides graphing

  8. Development of software architecture for environmental monitoring using wireless sensor networks

    E-Print Network [OSTI]

    Hari, Piyush

    2006-01-01T23:59:59.000Z

    In this thesis, I describe the development of the software architecture for temperature monitoring using Wireless Sensor Networks (WSN). The goal of the software is to provide a means to remotely monitor and analyze ...

  9. A SOFTWARE TOOL FOR WEB-BASED DISTANCE LEARNING SYSTEMS DESIGN

    E-Print Network [OSTI]

    1 A SOFTWARE TOOL FOR WEB-BASED DISTANCE LEARNING SYSTEMS DESIGN Dr. Kasim M. Al-Aubidy Computer an attempt to introduce a software tool for development of a web-based distance-learning course. The second's degree of understanding in each unit. It provides a powerful educational tool that can assist the learner

  10. User Guide for the STAYSL PNNL Suite of Software Tools

    SciTech Connect (OSTI)

    Greenwood, Lawrence R.; Johnson, Christian D.

    2013-02-27T23:59:59.000Z

    The STAYSL PNNL software suite provides a set of tools for working with neutron activation rates measured in a nuclear fission reactor, an accelerator-based neutron source, or any neutron field to determine the neutron flux spectrum through a generalized least-squares approach. This process is referred to as neutron spectral adjustment since the preferred approach is to use measured data to adjust neutron spectra provided by neutron physics calculations. The input data consist of the reaction rates based on measured activities, an initial estimate of the neutron flux spectrum, neutron activation cross sections and their associated uncertainties (covariances), and relevant correction factors. The output consists of the adjusted neutron flux spectrum and associated covariance matrix, which is useful for neutron dosimetry and radiation damage calculations.

  11. Automated energy monitoring of machine tools

    E-Print Network [OSTI]

    Vijayaraghavan, Athulan; Dornfeld, David

    2010-01-01T23:59:59.000Z

    in context with the energy consumption data. 4.2. Reasoning:to decrease energy consumption, energy data has to be placedthe energy consumption and operational data of machine tools

  12. AUTOPAYITEM -A SOFTWARE TOOL TO MANAGE PAY ITEMS FOR HIGHWAY DESIGN

    E-Print Network [OSTI]

    Tian, Zong Z.

    standards and procedures of the Idaho Transportation Department (ITD). API can be described as a Micro of AutoPayItem (API), a computer software tool that manages highway design pay items based on the current Language (MDL) is the primary tool for coding the software. API allows highway designers a single point

  13. ELARVA: A Monitoring tool for Erlang Christian Colombo, Adrian Francalanza, and Rudolph Gatt

    E-Print Network [OSTI]

    Francalanza, Adrian

    with standard verification tech- niques for concurrency. LARVA is a runtime monitoring tool targeting

  14. Software-based tool path evaluation for environmental sustainability

    E-Print Network [OSTI]

    KONG, DAEYOUNG; Seungchoun Choi; Yusuke Yasui; Sushrut Pavanaskar; Dornfeld, David; Wright, Paul

    2011-01-01T23:59:59.000Z

    available life cycle assessment (LCA) tools provide only aanalyses. Life cycle assessment (LCA) is generally accepted

  15. Vehicle Technologies Office: Software Tools | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    National Laboratory. GCtool The General Computational toolkit (GCtool) is a versatile simulation software package for designing, analyzing, and comparing different power-plant...

  16. Evaluation of Software Visualization Tools: Lessons Learned Mariam Sensalire and Patrick Ogao Alexandru Telea

    E-Print Network [OSTI]

    Telea, Alexandru C.

    Evaluation of Software Visualization Tools: Lessons Learned Mariam Sensalire and Patrick Ogao future evaluators. This paper presents the lessons learned from evaluating over 20 SoftVis tools learned is shown with the hope that these lessons will be of some assistance to future SoftVis tool

  17. Software-based tool path evaluation for environmental sustainability

    E-Print Network [OSTI]

    KONG, DAEYOUNG; Seungchoun Choi; Yusuke Yasui; Sushrut Pavanaskar; Dornfeld, David; Wright, Paul

    2011-01-01T23:59:59.000Z

    productivity, while the sustainability and energy ef?ciencyof sustainability of a tool path (i.e. energy consumption

  18. THE CORALREEF SOFTWARE SUITE AS A TOOL FOR SYSTEM AND NETWORK ADMINISTRATORS 1 The CoralReef software suite as a tool for system

    E-Print Network [OSTI]

    California at San Diego, University of

    flexible enough for rapid in-house customization. Existing passive data collection tools are typically to real-time report gen- eration. CoralReef provides a convenient set of passive data tools for a diverse increasingly difficult and impor- tant. To this end we have created the CoralReef passive traffic monitoring

  19. Algorithms and Software Tools for Extracting Coastal Morphological Information from Airborne LiDAR Data

    E-Print Network [OSTI]

    Gao, Yige

    2010-07-14T23:59:59.000Z

    ALGORITHMS AND SOFTWARE TOOLS FOR EXTRACTING COASTAL MORPHOLOGICAL INFORMATION FROM AIRBORNE LiDAR DATA A Thesis by YIGE GAO Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment... of the requirements for the degree of MASTER OF SCIENCE May 2009 Major Subject: Geography ALGORITHMS AND SOFTWARE TOOLS FOR EXTRACTING COASTAL MORPHOLOGICAL INFORMATION FROM AIRBORNE LiDAR DATA A Thesis by YIGE GAO...

  20. Tools for MDA Software Development: Evaluation Criteria and Set of Desirable Features

    E-Print Network [OSTI]

    Dascalu, Sergiu

    Tools for MDA Software Development: Evaluation Criteria and Set of Desirable Features Tihomir Calic}@cse.unr.edu Abstract Model Driven Architecture (MDA) is a new approach to software development that moves standard code(s) and fully executable source code. MDA provides interoperability capabilities between different technologies

  1. MONITORING AN ADA SOFTWARE DEVELOPMEN T Victor R. Basili

    E-Print Network [OSTI]

    Basili, Victor R.

    and Elizabeth Kruesi are now with Software Metrics, Inc. Sylvia Sheppard is with Booz, Allen, and Hamilton, Inc

  2. A Taxonomy of Buffer Overflows for Evaluating Static and Dynamic Software Testing Tools*

    E-Print Network [OSTI]

    A Taxonomy of Buffer Overflows for Evaluating Static and Dynamic Software Testing Tools* Kendra Phone: 7819812711 Email: LIPPMANN@LL.MIT.EDU ABSTRACT A taxonomy that uses 22 attributes detection tools. Attributes in the taxonomy include the buffer location (e.g. stack, heap, data

  3. Software tools for developing parallel applications. Part 1: Code development and debugging

    SciTech Connect (OSTI)

    Brown, J. [Los Alamos National Lab., NM (United States); Geist, A. [Oak Ridge National Lab., TN (United States). Computer Science and Mathematics Div.; Pancake, C. [Oregon State Univ., Corvallis, OR (United States). Dept. of Computer Science; Rover, D. [Michigan State Univ., East Lansing, MI (United States). Dept. of Electrical Engineering

    1997-04-01T23:59:59.000Z

    Developing an application for parallel computers can be a lengthy and frustrating process making it a perfect candidate for software tool support. Yet application programmers are often the last to hear about new tools emerging from R and D efforts. This paper provides an overview of two focuses of tool support: code development and debugging. Each is discussed in terms of the programmer needs addressed, the extent to which representative current tools meet those needs, and what new levels of tool support are important if parallel computing is to become more widespread.

  4. Monitoring Software Reliability using Statistical Process control: An MMLE approach

    E-Print Network [OSTI]

    Prasad, R Satya; Kantam, R R L

    2011-01-01T23:59:59.000Z

    This paper consider an MMLE (Modified Maximum Likelihood Estimation) based scheme to estimate software reliability using exponential distribution. The MMLE is one of the generalized frameworks of software reliability models of Non Homogeneous Poisson Processes (NHPPs). The MMLE gives analytical estimators rather than an iterative approximation to estimate the parameters. In this paper we proposed SPC (Statistical Process Control) Charts mechanism to determine the software quality using inter failure times data. The Control charts can be used to measure whether the software process is statistically under control or not.

  5. A Tool to Support Knowledge Based Software Maintenance: The Software Service Jonathan I. Maletic

    E-Print Network [OSTI]

    Maletic, Jonathan I.

    ]: · Corrective · Perfective · Adaptive · Preventive/ Preservation Corrective maintenance is the correction, and corrective were originally used by Swanson [15]. Preventive maintenance is done to improve the future,8,14,12] and preventive maintenance is rarely done. However, it is assumed that a good software development methodology

  6. Proceedings of the Workshop on software tools for distributed intelligent control systems

    SciTech Connect (OSTI)

    Herget, C.J. (ed.)

    1990-09-01T23:59:59.000Z

    The Workshop on Software Tools for Distributed Intelligent Control Systems was organized by Lawrence Livermore National Laboratory for the United States Army Headquarters Training and Doctrine Command and the Defense Advanced Research Projects Agency. The goals of the workshop were to the identify the current state of the art in tools which support control systems engineering design and implementation, identify research issues associated with writing software tools which would provide a design environment to assist engineers in multidisciplinary control design and implementation, formulate a potential investment strategy to resolve the research issues and develop public domain code which can form the core of more powerful engineering design tools, and recommend test cases to focus the software development process and test associated performance metrics. Recognizing that the development of software tools for distributed intelligent control systems will require a multidisciplinary effort, experts in systems engineering, control systems engineering, and compute science were invited to participate in the workshop. In particular, experts who could address the following topics were selected: operating systems, engineering data representation and manipulation, emerging standards for manufacturing data, mathematical foundations, coupling of symbolic and numerical computation, user interface, system identification, system representation at different levels of abstraction, system specification, system design, verification and validation, automatic code generation, and integration of modular, reusable code.

  7. Creating a methodology and tool to capture and resolve conflicts in developing software requirements: Requirement Lifecycle Modeling Views manager (RLMV)

    E-Print Network [OSTI]

    Herrera, Leeha Rae-Lyn

    2013-02-22T23:59:59.000Z

    tool that will aid in tracing requirements throughout the software development lifecycle. The tool, named Requirement Lifecycle Modeling Views (RLMV), follows the architecture, as defined in The Unified Modeling Language Users Guide, for modeling...

  8. A Software Tool for the Design of Critical Robot Missions with Performance Guarantees

    E-Print Network [OSTI]

    \\ A Software Tool for the Design of Critical Robot Missions with Performance Guarantees D M. Lyonsa* , R.C. Arkinb , P. Nirmala , S. Jiangb , T-M. Liua a Fordham University, Bronx NY b Georgia Institute. Published by Elsevier B.V. Selection and/or peer-review under responsibility of Georgia Institute

  9. PET: an Interactive Software Testing Tool Elsa Gunter, Robert Kurshan, Doron Peled

    E-Print Network [OSTI]

    Peled, Doron A.

    PET: an Interactive Software Testing Tool Elsa Gunter, Robert Kurshan, Doron Peled Bell Laboratories 600 Mountain Ave. Murray Hill, NJ 07974 April 16, 2000 Abstract We describe here the PET (standing programs, interleaved sequences of code. The PET system calculates the exact condition to execute path

  10. Ontology-Based Software Analysis and Reengineering Tool Integration: The OASIS Service-Sharing Methodology

    E-Print Network [OSTI]

    Cordy, James R.

    Ontology-Based Software Analysis and Reengineering Tool Integration: The OASIS Service-Sharing Integration System (OASIS) is a novel approach to integration that makes use of specially constructed through service-sharing. This short pa- per provides an outline of the design and function of OASIS. 2

  11. Measuring, monitoring, and assessing software process using PAMPA 2.0 knowledge-based system

    E-Print Network [OSTI]

    Jung, Jin Hwan

    2005-08-29T23:59:59.000Z

    all phases of the application development cycle; planning, development, quality assurance, and support. Defect WorkFlow SoftQuest Systems Defect tracking and change management tool DevTrack TechExcel Defect and project tracking tool. Features... retrieval Risk Radar Software Program Manager?s Network Risk management tool in Excel Risk+ C/S Solutions Inc. Risk analysis add-on for Microsoft Project to quantify the cost and schedule uncertainty associated with project plans using Monte Carlo...

  12. Software Construction and Composition Tools for Petascale Computing SCW0837 Progress Report

    SciTech Connect (OSTI)

    Epperly, T W; Hochstein, L

    2011-09-12T23:59:59.000Z

    The majority of scientific software is distributed as source code. As the number of library dependencies and supported platforms increases, so does the complexity of describing the rules for configuring and building software. In this project, we have performed an empirical study of the magnitude of the build problem by examining the development history of two DOE-funded scientific software projects. We have developed MixDown, a meta-build tool, to simplify the task of building applications that depend on multiple third-party libraries. The results of this research indicate that the effort that scientific programmers spend takes a significant fraction of the total development effort and that the use of MixDown can significantly simplify the task of building software with multiple dependencies.

  13. Seeing (and Hearing) is Believing! How Screen Capture Software Makes Website Usability Data a More Effective Tool

    E-Print Network [OSTI]

    Stark, Jeffrey; Goodwin, Susan

    2004-06-19T23:59:59.000Z

    Seeing (and Hearing) is Believing! How Screen Capture Software Makes Website Usability Data a More Effective Tool Susan Goodwin and Jeff Stark Texas A&M University Libraries ALA Poster Session, Summer 2004 Abstract Texas A&M University... Libraries has adopted screen capture software as a tool to assist with website usability studies. This poster session provides an introduction to the software package used to record the usability sessions in which volunteers were asked to complete specific...

  14. SYTMIS: SOFTWARE FOR REAL-TIME MICROSEISMIC MONITORING SYSTEMS

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    industries, hydrocarbon fields; Underground gas-storage reservoirs, radioactive waste; studies of seismic to fulfil most field situations, SYTMIS also permit multiple moni- toring from an unique central site approach in such varied fields äs: the monitoring of rock masses and local subsidences: extractive

  15. Monitoring the Quality of Outsourced Software Tobias Kuipers

    E-Print Network [OSTI]

    Visser, Joost

    hand, the loss of technical expertise at the client organization leads to loss of control over. To prevent that costs, deadlines, and functionality slip out of control, the remote management of outsourced]. Section III high-lights the tools that support the method, while Section IV focusses on the quality model

  16. Analyst Tools and Quality Control Software for the ARM Data System

    SciTech Connect (OSTI)

    Moore, S.T.

    2004-12-14T23:59:59.000Z

    ATK Mission Research develops analyst tools and automated quality control software in order to assist the Atmospheric Radiation Measurement (ARM) Data Quality Office with their data inspection tasks. We have developed a web-based data analysis and visualization tool, called NCVweb, that allows for easy viewing of ARM NetCDF files. NCVweb, along with our library of sharable Interactive Data Language procedures and functions, allows even novice ARM researchers to be productive with ARM data with only minimal effort. We also contribute to the ARM Data Quality Office by analyzing ARM data streams, developing new quality control metrics, new diagnostic plots, and integrating this information into DQ HandS - the Data Quality Health and Status web-based explorer. We have developed several ways to detect outliers in ARM data streams and have written software to run in an automated fashion to flag these outliers.

  17. Techniques and tools for measuring energy efficiency of scientific software applications

    E-Print Network [OSTI]

    David Abdurachmanov; Peter Elmer; Giulio Eulisse; Robert Knight; Tapio Niemi; Jukka K. Nurminen; Filip Nyback; Goncalo Pestana; Zhonghong Ou; Kashif Khan

    2014-10-10T23:59:59.000Z

    The scale of scientific High Performance Computing (HPC) and High Throughput Computing (HTC) has increased significantly in recent years, and is becoming sensitive to total energy use and cost. Energy-efficiency has thus become an important concern in scientific fields such as High Energy Physics (HEP). There has been a growing interest in utilizing alternate architectures, such as low power ARM processors, to replace traditional Intel x86 architectures. Nevertheless, even though such solutions have been successfully used in mobile applications with low I/O and memory demands, it is unclear if they are suitable and more energy-efficient in the scientific computing environment. Furthermore, there is a lack of tools and experience to derive and compare power consumption between the architectures for various workloads, and eventually to support software optimizations for energy efficiency. To that end, we have performed several physical and software-based measurements of workloads from HEP applications running on ARM and Intel architectures, and compare their power consumption and performance. We leverage several profiling tools (both in hardware and software) to extract different characteristics of the power use. We report the results of these measurements and the experience gained in developing a set of measurement techniques and profiling tools to accurately assess the power consumption for scientific workloads.

  18. AT&T Remote Patient Monitoring Solutions Software as a Service (RPMSaaS) helps

    E-Print Network [OSTI]

    Fisher, Kathleen

    way to provide outpatient care. Fortunately, healthcare reform and the Affordable Care Act allow new-time remote patient monitoring software. RPM­SaaS automates post-discharge care through interactive mobile patient access, clinical caregivers may intervene to avoid acute health problems, as well as provide

  19. Creating a strategic plan for configuration management using computer aided software engineering (CASE) tools

    SciTech Connect (OSTI)

    Smith, P.R.; Sarfaty, R.

    1993-05-01T23:59:59.000Z

    This paper provides guidance in the definition, documentation, measurement, enhancement of processes, and validation of a strategic plan for configuration management (CM). The approach and methodology used in establishing a strategic plan is the same for any enterprise, including the Department of Energy (DOE), commercial nuclear plants, the Department of Defense (DOD), or large industrial complexes. The principles and techniques presented are used world wide by some of the largest corporations. The authors used industry knowledge and the areas of their current employment to illustrate and provide examples. Developing a strategic configuration and information management plan for DOE Idaho Field Office (DOE-ID) facilities is discussed in this paper. A good knowledge of CM principles is the key to successful strategic planning. This paper will describe and define CM elements, and discuss how CM integrates the facility`s physical configuration, design basis, and documentation. The strategic plan does not need the support of a computer aided software engineering (CASE) tool. However, the use of the CASE tool provides a methodology for consistency in approach, graphics, and database capability combined to form an encyclopedia and a method of presentation that is easily understood and aids the process of reengineering. CASE tools have much more capability than those stated above. Some examples are supporting a joint application development group (JAD) to prepare a software functional specification document and, if necessary, provide the capability to automatically generate software application code. This paper briefly discusses characteristics and capabilities of two CASE tools that use different methodologies to generate similar deliverables.

  20. Tools for Reusing Earth Science Software Robert R. Downs", Neal F. Most#, James J. Marshall#, Chris A. Mattmann$%&

    E-Print Network [OSTI]

    Mattmann, Chris

    ! ! ! ! Tools for Reusing Earth Science Software Robert R. Downs", Neal F. Most#, James J. Marshall.9 Greenbelt, Maryland 20771 USA James.J.Marshall@nasa.gov 3 Jet Propulsion Laboratory California Institute

  1. Improve Motor System Efficiency with MotorMaster+, Software Tools for Industry, Industrial Technologies Program (ITP) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2008-12-01T23:59:59.000Z

    This fact sheet describes how the Industrial Technologies Program MotorMaster+ software tool aids industrial plants with finding energy-efficient motor replacement options and managing motor systems.

  2. The application of formal software engineering methods to the unattended and remote monitoring software suite at Los Alamos National Laboratory

    SciTech Connect (OSTI)

    Determan, John Clifford [Los Alamos National Laboratory; Longo, Joseph F [Los Alamos National Laboratory; Michel, Kelly D [Los Alamos National Laboratory

    2009-01-01T23:59:59.000Z

    The Unattended and Remote Monitoring (UNARM) system is a collection of specialized hardware and software used by the International Atomic Energy Agency (IAEA) to institute nuclear safeguards at many nuclear facilities around the world. The hardware consists of detectors, instruments, and networked computers for acquiring various forms of data, including but not limited to radiation data, global position coordinates, camera images, isotopic data, and operator declarations. The software provides two primary functions: the secure and reliable collection of this data from the instruments and the ability to perform an integrated review and analysis of the disparate data sources. Several years ago the team responsible for maintaining the software portion of the UNARM system began the process of formalizing its operations. These formal operations include a configuration management system, a change control board, an issue tracking system, and extensive formal testing, for both functionality and reliability. Functionality is tested with formal test cases chosen to fully represent the data types and methods of analysis that will be commonly encountered. Reliability is tested with iterative, concurrent testing where up to five analyses are executed simultaneously for thousands of cycles. Iterative concurrent testing helps ensure that there are no resource conflicts or leaks when multiple system components are in use simultaneously. The goal of this work is to provide a high quality, reliable product, commensurate with the criticality of the application. Testing results will be presented that demonstrate that this goal has been achieved and the impact of the introduction of a formal software engineering framework to the UNARM product will be presented.

  3. Tank Monitoring and Document control System (TMACS) As Built Software Design Document

    SciTech Connect (OSTI)

    GLASSCOCK, J.A.

    2000-01-27T23:59:59.000Z

    This document describes the software design for the Tank Monitor and Control System (TMACS). This document captures the existing as-built design of TMACS as of November 1999. It will be used as a reference document to the system maintainers who will be maintaining and modifying the TMACS functions as necessary. The heart of the TMACS system is the ''point-processing'' functionality where a sample value is received from the field sensors and the value is analyzed, logged, or alarmed as required. This Software Design Document focuses on the point-processing functions.

  4. Analyst Tools and Quality Control Software for the ARM Data System

    SciTech Connect (OSTI)

    Moore, Sean; Hughes, Gary

    2008-07-31T23:59:59.000Z

    Mission Research develops analyst tools and automated quality control software in order to assist the Atmospheric Radiation Measurement (ARM) Data Quality Office with their data inspection tasks. We have developed web-based data analysis and visualization tools such as the interactive plotting program NCVweb, various diagnostic plot browsers, and a datastream processing status application. These tools allow even novice ARM researchers to be productive with ARM data with only minimal effort. We also contribute to the ARM Data Quality Office by analyzing ARM data streams, developing new quality control metrics, new diagnostic plots, and integrating this information into DQ HandS - the Data Quality Health and Status web-based explorer. We have developed several ways to detect outliers in ARM data streams and have written software to run in an automated fashion to flag these outliers. We have also embarked on a system to comprehensively generate long time-series plots, frequency distributions, and other relevant statistics for scientific and engineering data in most high-level, publicly available ARM data streams. Furthermore, frequency distributions categorized by month or by season are made available to help define valid data ranges specific to those time domains. These statistics can be used to set limits that when checked, will improve upon the reporting of suspicious data and the early detection of instrument malfunction. The statistics and proposed limits are stored in a database for easy reporting, refining, and for use by other processes. Web-based applications to view the results are also available.

  5. Techniques and tools for measuring energy efficiency of scientific software applications

    E-Print Network [OSTI]

    Abdurachmanov, David; Eulisse, Giulio; Knight, Robert; Niemi, Tapio; Nurminen, Jukka K; Nyback, Filip; Pestana, Goncalo; Ou, Zhonghong; Khan, Kashif

    2014-01-01T23:59:59.000Z

    The scale of scientific High Performance Computing (HPC) and High Throughput Computing (HTC) has increased significantly in recent years, and is becoming sensitive to total energy use and cost. Energy-efficiency has thus become an important concern in scientific fields such as High Energy Physics (HEP). There has been a growing interest in utilizing alternate architectures, such as low power ARM processors, to replace traditional Intel x86 architectures. Nevertheless, even though such solutions have been successfully used in mobile applications with low I/O and memory demands, it is unclear if they are suitable and more energy-efficient in the scientific computing environment. Furthermore, there is a lack of tools and experience to derive and compare power consumption between the architectures for various workloads, and eventually to support software optimizations for energy efficiency. To that end, we have performed several physical and software-based measurements of workloads from HEP applications running o...

  6. Acts -- A collection of high performing software tools for scientific computing

    SciTech Connect (OSTI)

    Drummond, L.A.; Marques, O.A.

    2002-11-01T23:59:59.000Z

    During the past decades there has been a continuous growth in the number of physical and societal problems that have been successfully studied and solved by means of computational modeling and simulation. Further, many new discoveries depend on high performance computer simulations to satisfy their demands for large computational resources and short response time. The Advanced CompuTational Software (ACTS) Collection brings together a number of general-purpose computational tool development projects funded and supported by the U.S. Department of Energy (DOE). These tools make it easier for scientific code developers to write high performance applications for parallel computers. They tackle a number of computational issues that are common to a large number of scientific applications, mainly implementation of numerical algorithms, and support for code development, execution and optimization. The ACTS collection promotes code portability, reusability, reduction of duplicate efforts, and tool maturity. This paper presents a brief introduction to the functionality available in ACTS. It also highlight the tools that are in demand by Climate and Weather modelers.

  7. Lagrangian tools to monitor transport and mixing in the ocean

    E-Print Network [OSTI]

    S. V. Prants; M. V. Budyansky; M. Yu. Uleysky

    2012-05-20T23:59:59.000Z

    We apply the Lagrangian approach to study surface transport and mixing in the ocean. New tools have been developed to track the motion of water masses, their origin and fate and to quantify transport and mixing. To illustrate the methods used we compute the Lagrangian synoptic maps a comparatively small marine bay, the Peter the Great Bay in the Japan Sea near Vladivostok city (Russia), and in a comparatively large region in the North Pacific, the Kuroshio Extension system. In the first case we use velocity data from a Japan Sea circulation numerical model and in the second one the velocity data are derived from satellite altimeter measurements of anomalies of the sea height distributed by AVISO.

  8. KEEL: A data mining software tool integrating genetic fuzzy systems Jesus Alcala-Fdez, Salvador Garcia, Francisco Jose Berlanga

    E-Print Network [OSTI]

    Granada, Universidad de

    KEEL: A data mining software tool integrating genetic fuzzy systems Jes´us Alcal´a-Fdez, Salvador Mining problems including regression, classification, clustering, pattern mining and so on. It includes solving is a widespread practice. Problems such as engineering applications [6], ecology [7], medicine [8

  9. Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    improving the KIVA internal combustion engine modeling tool to help automotive engines be more fuel efficient. A free version of KIVA can be downloaded through FCI's...

  10. SAR Motion Products: Tools for Monitoring Changes in Sea Ice Mass Balance and Thickness Distribution

    E-Print Network [OSTI]

    Geiger, Cathleen

    decrease in a warming climate. For example, in a weakening ice pack, we could expect convergence storminess in the Arctic; (b) a seasonal ice pack of reduced thickness; and (c) large scale changes in driftSAR Motion Products: Tools for Monitoring Changes in Sea Ice Mass Balance and Thickness

  11. DuoTracker: Tool Support for Software Defect Data Collection and Analysis

    E-Print Network [OSTI]

    Dascalu, Sergiu

    evaluate their process using either the Capability Maturity Model (CMM) [3] or the ISO 9001 standards [4 software processes. Keywords--software defects; software anomalies; defect classification; PSP; CMM; IS0-9001 is then compared against the quality models of CMM or IS0 9001. There are also improvement methods such as IDEAL [5

  12. Integrating and automating the software environment for the Beam and Radiation Monitoring for CMS

    E-Print Network [OSTI]

    Filyushkina, Olga; Juslin, J

    2010-01-01T23:59:59.000Z

    The real-time online visualization framework used by the Beam and Radiation Monitoring group at the Compact Muon Solenoid at Large Hadron Collider, CERN. The purpose of the visualization framework is to provide real-time diagnostic of beam conditions, which defines the set of the requirements to be met by the framework. Those requirements include data quality assurance, vital safety issues, low latency, data caching, etc. The real-time visualization framework is written in the Java programming language and based on JDataViewer--a plotting package developed at CERN. At the current time the framework is run by the Beam and Radiation Monitoring, Pixel, Tracker groups, Run Field Manager and others. It contributed to real-time data analysis during 2009-2010 runs as a stable monitoring tool. The displays reflect the beam conditions in a real-time with the low latency level, thus it is the first place at the CMS detector where the beam collisions are observed.

  13. THE CORALREEF SOFTWARE SUITE AS A TOOL FOR SYSTEM AND NETWORK ADMINISTRATORS 1 The CoralReef software suite as a tool for system

    E-Print Network [OSTI]

    California at San Diego, University of

    exible enough for rapid in-house customization. Existing passive data collection tools are typically to ows analysis to real-time report gen- eration. CoralReef provides a convenient set of passive data networks has become increasingly diÆcult and impor- tant. To this end we have created the CoralReef passive

  14. Software tools for developing parallel applications. Part 2: Interactive control and performance tuning

    SciTech Connect (OSTI)

    Brown, J. [Los Alamos National Lab., NM (United States); Geist, A. [Oak Ridge National Lab., TN (United States). Computer Science and Mathematics Div.; Pancake, C. [Oregon State Univ., Corvallis, OR (United States). Dept. of Computer Science; Rover, D. [Michigan State Univ., East Lansing, MI (United States). Dept. of Electrical Engineering

    1997-04-01T23:59:59.000Z

    This paper continues the discussion of parallel tool support with an overview of the current state of tools for runtime control and performance tuning. Each is discussed in terms of the programmer needs addressed, the extent to which representative current tools meet those needs, and what new levels of tool support are important if parallel computing is to become more widespread.

  15. Microseismic monitoring as a tool for mapping fractures in the San Andres dolomite. [Microearthquakes

    SciTech Connect (OSTI)

    Rutledge, J.T.; Fairbanks, T.D.; House, L.S. (Los Alamos National Lab., NM (United States)); Murphy, M.B. (Murphy Operating Corp., Roswell, NM (United States))

    1991-01-01T23:59:59.000Z

    Microseismic monitoring shows promise of being a practical tool for mapping fractures in the San Andres dolomite in terms of rate of microearthquake occurrence and the areal coverage possible from a single downhole seismometer. Microearthquakes were detected during normal waterflood production but monitoring was not complete enough to correlate injection/production activity with microseismic event recurrence. Constant monitoring time capability with at least 3 downhole seismometers is needed to more accurately locate events, and to reliably characterize seismic recurrence in the field. In addition, modeling pressure variations in the reservoir may help explain the mechanisms that produces the microearthquakes. Data useful in modeling the pressure variations could be from tracer experiments, pressure interference tests and individual well production-injection volume. Understanding the mechanism of producing the microearthquakes should, in turn, allow the correlation of the microseismicity with fluid flow within the reservoir. 2 refs., 3 figs.

  16. Microseismic monitoring as a tool for mapping fractures in the San Andres dolomite

    SciTech Connect (OSTI)

    Rutledge, J.T.; Fairbanks, T.D.; House, L.S. [Los Alamos National Lab., NM (United States); Murphy, M.B. [Murphy Operating Corp., Roswell, NM (United States)

    1991-12-31T23:59:59.000Z

    Microseismic monitoring shows promise of being a practical tool for mapping fractures in the San Andres dolomite in terms of rate of microearthquake occurrence and the areal coverage possible from a single downhole seismometer. Microearthquakes were detected during normal waterflood production but monitoring was not complete enough to correlate injection/production activity with microseismic event recurrence. Constant monitoring time capability with at least 3 downhole seismometers is needed to more accurately locate events, and to reliably characterize seismic recurrence in the field. In addition, modeling pressure variations in the reservoir may help explain the mechanisms that produces the microearthquakes. Data useful in modeling the pressure variations could be from tracer experiments, pressure interference tests and individual well production-injection volume. Understanding the mechanism of producing the microearthquakes should, in turn, allow the correlation of the microseismicity with fluid flow within the reservoir. 2 refs., 3 figs.

  17. Harnessing Smart Sensor Technology for Industrial Energy Efficiency- Making Process-Specific Efficiency Projects Cost Effective with a Broadly Configurable, Network-Enabled Monitoring Tool 

    E-Print Network [OSTI]

    Wiczer, J. J.; Wiczer, M. B.

    2011-01-01T23:59:59.000Z

    To improve monitoring technology often re-quired by industrial energy efficiency projects, we have developed a set of power and process monitoring tools based on the IEEE 1451.2 smart sensor interface standard. These tools enable a wide...

  18. Stretching and bending with flexible FT-IR process monitors, probes and software

    SciTech Connect (OSTI)

    Peters, D.C. [KVB/Analect, Utica, NY (United States)

    1995-12-31T23:59:59.000Z

    FT-IR process analyzers continue to gain recognition for reliable and accurate on-line analyses on a broad variety of processes around the world. When fast analyses are required, on-line FT-IR analyzers offer speed and specificity for many applications. The use of FT-IR spectroscopy, either in the Mid-IR region or Near IR region offers fundamental advantages over other technologies. These advantages make calibrations exceptionally stable for an analyzer over time and offer improved ease of calibration transfer between similar analyzers. Spectral region selection criteria are reviewed, to help define when to use the Mid-IR region or the Near-IR region (or even when to use parts of both) for a given sample stream. New fiber optic sampling probes for transmission, attenuated total reflection, diffuse reflection and web sensing have solved nagging problems. What many process analyzer specialists are discovering is that new probes are becoming available each month, offering newer process tolerance (can tolerate higher temp or pressure) or even new sampling approaches altogether. This paper describes on-line applications in pharmaceuticals, specialty chemicals, polymer production and refinery production which demonstrate the range of techniques used to appropriately optimize the on-line analyzer. In addition, calibration transfer issues will be discussed, demonstrating the importance of the software tools to help sort out the causes for cal errors (spectral contamination, etc.).

  19. Systematic Software Testing using VeriSoft: An Analysis of the 4ESS HeartBeat Monitor

    E-Print Network [OSTI]

    Godefroid, Patrice

    Systematic Software Testing using VeriSoft: An Analysis of the 4ESS Heart­Beat Monitor Patrice­fledged programming lan­ guages such as C or C++. We report in this paper our anal­ ysis with VeriSoft of the 4ESS. The 4ESS HBM plays an important role in the routing of data in the switch, and can significantly im

  20. 2015-07-02T23:36:00-06:00 U.S. National Software Tools 108

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit withTianlinPapersWindey Wind6:00-06:00 U.S. National Software Tools 108

  1. Software Tools for Technology Transfer manuscript No. (will be inserted by the editor)

    E-Print Network [OSTI]

    Stark, Eugene W.

    Algorithm) is a software system that provides closed-loop control to a high-output intravenous infusion pump. The system is intended to infuse fluids to resuscitate medical pa- tients who are in danger of developing, and then computes an analog output voltage to be used to control the flow rate of the infusion pump. The system must

  2. Survey of Companies in Machine Health Monitoring and Maintenance Company Capability Software Application Modeling Technique

    E-Print Network [OSTI]

    Huang, Samuel H.

    software · Paper · Food · Steel · Petrochemical industries NO MODELING AssetPoint www.tabware.com · Data acquisition and open systems storage · Enterprise Asset Management Tabware (CMMS application) · Petrochemical

  3. Data Assimilation Tools for CO2 Reservoir Model Development – A Review of Key Data Types, Analyses, and Selected Software

    SciTech Connect (OSTI)

    Rockhold, Mark L.; Sullivan, E. C.; Murray, Christopher J.; Last, George V.; Black, Gary D.

    2009-09-30T23:59:59.000Z

    Pacific Northwest National Laboratory (PNNL) has embarked on an initiative to develop world-class capabilities for performing experimental and computational analyses associated with geologic sequestration of carbon dioxide. The ultimate goal of this initiative is to provide science-based solutions for helping to mitigate the adverse effects of greenhouse gas emissions. This Laboratory-Directed Research and Development (LDRD) initiative currently has two primary focus areas—advanced experimental methods and computational analysis. The experimental methods focus area involves the development of new experimental capabilities, supported in part by the U.S. Department of Energy’s (DOE) Environmental Molecular Science Laboratory (EMSL) housed at PNNL, for quantifying mineral reaction kinetics with CO2 under high temperature and pressure (supercritical) conditions. The computational analysis focus area involves numerical simulation of coupled, multi-scale processes associated with CO2 sequestration in geologic media, and the development of software to facilitate building and parameterizing conceptual and numerical models of subsurface reservoirs that represent geologic repositories for injected CO2. This report describes work in support of the computational analysis focus area. The computational analysis focus area currently consists of several collaborative research projects. These are all geared towards the development and application of conceptual and numerical models for geologic sequestration of CO2. The software being developed for this focus area is referred to as the Geologic Sequestration Software Suite or GS3. A wiki-based software framework is being developed to support GS3. This report summarizes work performed in FY09 on one of the LDRD projects in the computational analysis focus area. The title of this project is Data Assimilation Tools for CO2 Reservoir Model Development. Some key objectives of this project in FY09 were to assess the current state-of-the-art in reservoir model development, the data types and analyses that need to be performed in order to develop and parameterize credible and robust reservoir simulation models, and to review existing software that is applicable to these analyses. This report describes this effort and highlights areas in which additional software development, wiki application extensions, or related GS3 infrastructure development may be warranted.

  4. Final Report "CoDeveloper: A Secure Web-Invocable Collaborative Software Development Tool"

    SciTech Connect (OSTI)

    Svetlana Shasharina

    2005-11-27T23:59:59.000Z

    Modern scientific simulations generate large datasets at remote sites with appropriate resources (supercomputers and clusters). Bringing these large datasets to the computers of all members of a distributed team of collaborators is often impractical or even impossible: there might not be enough bandwidth, storage capacity or appropriate data analysis and visualization tools locally available. To address the need to access remote data, avoid heavy Internet traffic and unnecessary data replication, Tech-X Corporation developed a tool, which allows running remote data visualization collaboratively and sharing the visualization objects as they get generated. The size of these objects is typically much smaller than the size of the original data. For marketing reasons, we renamed the product CoReViz. The detailed information on this product can be found at http://www.txcorp.com/products/CoReViz/. We installed and tested this tool at multiple machines at Tech-X and on seaborg at NERSC. In what follows, we give a detailed description of this tool.

  5. EPA-GHG Inventory Targeted Data Collection Strategies and Software Tools |

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOE FacilityDimondale,South, NewDyerTier2 Submit Software WebpageOpen Energy

  6. Software Tools for the Analysis of the Photocathode Response of Photomultiplier Vacuum Tubes

    E-Print Network [OSTI]

    Fabbri, R

    2013-01-01T23:59:59.000Z

    The central institute of electronics (ZEA-2) in the Forschungszentrum Juelich (FZJ) has developed a system to scan the response of the photocathode of photomultiplier tubes (PMT). The PMT sits tight on a supporting structure, while a blue light emitting diode is moved along its surface by two stepper motors, spanning both the x and y coordinates. All the system is located in a light-tight box made by wood. A graphical software was developed in-situ to perform the scan operations under different configurations (e.g., the step size of the scan and the number of measurements per point). During each point measurement the current output generated in the vacuum photomultiplier is processed in sequence by a pre-amplifier (mainly to convert the current signal into a voltage signal), an amplifier, and by an ADC module (typically a CAEN N957). The information of the measurement is saved in files at the end of the scan. Recently, software based on the CERN ROOT and on the Qt libraries was developed to help the user anal...

  7. Assessing the Potential of Developing a Tool for Residential Facility Management Using Building Information Modeling Software

    E-Print Network [OSTI]

    Madhani, Himanshu 1986-

    2012-11-29T23:59:59.000Z

    for scheduled, proactive and (when necessary) reactive maintenance work. Globally, use of smart phones and various applications for home and office security has amplified. With increase in use of smart phones and applications by owners, such a tool would... that the building is a smart building which is synced with the system. Smart Buildings LLC (a US-based engineering and design firm) offers this definition: ?A smart building is the integration of building, technology, and energy systems. These systems may include...

  8. Modeling the resolution of inexpensive, novel non-seismic geophysical monitoring tools to monitor CO2 injection into coal beds

    E-Print Network [OSTI]

    Gasperikova, E.

    2010-01-01T23:59:59.000Z

    monitoring of enhanced oil recovery (EOR) projects showedElectromagnetic Enhanced Oil Recovery Imaginary part of a

  9. Stored CO2 and Methane Leakage Risk Assessment and Monitoring Tool Development: CO2 Capture Project Phase 2 (CCP2)

    SciTech Connect (OSTI)

    Dan Kieki

    2008-09-30T23:59:59.000Z

    The primary project goal is to develop and test tools for optimization of ECBM recovery and geologic storage of CO{sub 2} in coalbeds, in addition to tools for monitoring CO{sub 2} sequestration in coalbeds to support risk assessment. Three critical topics identified are (1) the integrity of coal bed methane geologic and engineered systems, (2) the optimization of the coal bed storage process, and (3) reliable monitoring and verification systems appropriate to the special conditions of CO{sub 2} storage and flow in coals.

  10. Development of Nuclear Reactor remote Monitoring software (NRM) for the Star project

    E-Print Network [OSTI]

    Gautier, Vincent Charles

    2002-01-01T23:59:59.000Z

    operations support for multiple plants, guarantee safety and nonproliferation, and improve cost-effectiveness. NRM allows soft real time monitoring of the reactor power, primary and secondary coolant temperatures, control rod movement, and secondary coolant...

  11. ICSE Workshop on Green and Sustainable Software Engineering, Zurich, Switzerland, 3rd June 2012 An Energy Consumption Model and Analysis Tool for Cloud Computing

    E-Print Network [OSTI]

    Schneider, Jean-Guy

    system-level optimisation. Keywords-green computing; Cloud computing; energy consumption; performanceIn 1st ICSE Workshop on Green and Sustainable Software Engineering, Zurich, Switzerland, 3rd June 2012 An Energy Consumption Model and Analysis Tool for Cloud Computing Environments FeiFei Chen, Jean

  12. European Wind Energy Conference & Exhibition EWEC 2003, Madrid, Spain. State-of-the-Art on Methods and Software Tools for Short-Term

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    European Wind Energy Conference & Exhibition EWEC 2003, Madrid, Spain. State-of-the-Art on Methods and Software Tools for Short-Term Prediction of Wind Energy Production G. Giebel*, L. Landberg, Risoe National Roskilde, Denmark Abstract: The installed wind energy capacity in Europe today is 20 GW, while

  13. Microfluidic bioreactors as tools for monitoring cell microenvironment Miguel A. Acosta, Yordan Kostov, and Jennie B. Leach

    E-Print Network [OSTI]

    Leach, Jennie B.

    Microfluidic bioreactors as tools for monitoring cell microenvironment Miguel A. Acosta, Yordan bioreactor/sensor system to investigate cell response to changes in the chemical microenvironment found to the cells during culture. Results from microfluidic bioreactor fabrication and oxygen sensor calibration

  14. Runtime Monitoring of Software Energy Hotspots Adel Noureddine1,2

    E-Print Network [OSTI]

    Boyer, Edmond

    to their energy consumption. In this domain, most of the state-of-the-art solutions concentrate on coarse-grained approaches to mon- itor the energy consumption of a device or a process. How- ever, none of the existing consumption. In this paper, we therefore report on a fine-grained runtime energy monitoring framework we de

  15. Modeling the resolution of inexpensive, novel non-seismic geophysical monitoring tools to monitor CO2 injection into coal beds

    E-Print Network [OSTI]

    Gasperikova, E.

    2010-01-01T23:59:59.000Z

    Plasynski, S. , 2008, Advancing Coal-Based Power Generationto monitor CO 2 injection into Coal Beds as a part of theanalysis for CO 2 movement in coal beds was based on the

  16. Reducing Software Failures: Addressing the Ethical Risks of the Software Development By Don Gotterbarn

    E-Print Network [OSTI]

    De Montfort University

    Reducing Software Failures: Addressing the Ethical Risks of the Software Development Lifecycle by software developers. This process also is incorporated into a software development life cycle. A tool to develop Software Development Impact Statements is also discussed. INTRODUCTION Software developers

  17. Hopper Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) EnvironmentalGyroSolé(tm) HarmonicbetandEnergy 2010 A File Storage and I/O

  18. Fenestration Software Tools

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport inEnergy June 6-7, 2013 Meeting Federal RegisterCoal1Into High6

  19. PDSF Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeeding access toTest andOptimize832 2.860Selected Announcements PDSFTools

  20. Franklin Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental Assessments (EA)Budget(DANCE) TargetForms &FrancisEmailFileJobLogin

  1. Edison Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisitingContract ManagementDiscoveringESnet UpdateEarth

  2. Euclid Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental Assessments (EA) /Email Announcements Archive EmailKnown

  3. SURFACE GEOPHYSICAL EXPLORATION DEVELOPING NONINVASIVE TOOLS TO MONITOR PAST LEAKS AROUND HANFORD TANK FARMS

    SciTech Connect (OSTI)

    MYERS DA; RUCKER DF; LEVITT MT; CUBBAGE B; NOONAN GE; MCNEILL M; HENDERSON C

    2011-06-17T23:59:59.000Z

    A characterization program has been developed at Hanford to image past leaks in and around the underground storage tank facilities. The program is based on electrical resistivity, a geophysical technique that maps the distribution of electrical properties of the subsurface. The method was shown to be immediately successful in open areas devoid of underground metallic infrastructure, due to the large contrast in material properties between the highly saline waste and the dry sandy host environment. The results in these areas, confirmed by a limited number of boreholes, demonstrate a tendency for the lateral extent of the underground waste plume to remain within the approximate footprint of the disposal facility. In infrastructure-rich areas, such as tank farms, the conventional application of electrical resistivity using small point-source surface electrodes initially presented a challenge for the resistivity method. The method was then adapted to directly use the buried infrastructure as electrodes for both transmission of electrical current and measurements of voltage. For example, steel-cased wells that surround the tanks were used as long electrodes, which helped to avoid much of the infrastructure problems. Overcoming the drawbacks of the long electrode method has been the focus of our work over the past seven years. The drawbacks include low vertical resolution and limited lateral coverage. The lateral coverage issue has been improved by supplementing the long electrodes with surface electrodes in areas devoid of infrastructure. The vertical resolution has been increased by developing borehole electrode arrays that can fit within the small-diameter drive casing of a direct push rig. The evolution of the program has led to some exceptional advances in the application of geophysical methods, including logistical deployment of the technology in hazardous areas, development of parallel processing resistivity inversion algorithms, and adapting the processing tools to accommodate electrodes of all shapes and locations. The program is accompanied by a full set of quality assurance procedures that cover the layout of sensors, measurement strategies, and software enhancements while insuring the integrity of stored data. The data have been shown to be useful in identifying previously unknown contaminant sources and defining the footprint of precipitation recharge barriers to retard the movement of existing contamination.

  4. System Software and Tools for High Performance Computing Environments: A report on the findings of the Pasadena Workshop, April 14--16, 1992

    SciTech Connect (OSTI)

    Sterling, T. [Universities Space Research Association, Washington, DC (United States); Messina, P. [Jet Propulsion Lab., Pasadena, CA (United States); Chen, M. [Yale Univ., New Haven, CT (United States)] [and others

    1993-04-01T23:59:59.000Z

    The Pasadena Workshop on System Software and Tools for High Performance Computing Environments was held at the Jet Propulsion Laboratory from April 14 through April 16, 1992. The workshop was sponsored by a number of Federal agencies committed to the advancement of high performance computing (HPC) both as a means to advance their respective missions and as a national resource to enhance American productivity and competitiveness. Over a hundred experts in related fields from industry, academia, and government were invited to participate in this effort to assess the current status of software technology in support of HPC systems. The overall objectives of the workshop were to understand the requirements and current limitations of HPC software technology and to contribute to a basis for establishing new directions in research and development for software technology in HPC environments. This report includes reports written by the participants of the workshop`s seven working groups. Materials presented at the workshop are reproduced in appendices. Additional chapters summarize the findings and analyze their implications for future directions in HPC software technology development.

  5. A neuro-fuzzy system for tool condition monitoring in metal cutting

    E-Print Network [OSTI]

    Mesina, Omez Samoon

    1993-01-01T23:59:59.000Z

    for the detection of tool wear is done using a neuro-fuzzy system. The neural network captures the steady state relationship between the condition of the tool and sensor values, in the weights of the connections between neurons. The fuzzy rules and the entire...

  6. Flammable Gas Refined Safety Analysis Tool Software Verification and Validation Report for Resolve Version 2.5

    SciTech Connect (OSTI)

    BRATZEL, D.R.

    2000-09-28T23:59:59.000Z

    The purpose of this report is to document all software verification and validation activities, results, and findings related to the development of Resolve Version 2.5 for the analysis of flammable gas accidents in Hanford Site waste tanks.

  7. Writing and Monitoring in International Standardization, Theoretical Choices and Methodological Tools

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    organizations are in charge of global security management. To address this issue, ISO (International Standards Organization), the main international organization for technical standardization, has launched a set of studiesWriting and Monitoring in International Standardization, Theoretical Choices and Methodological

  8. Software distribution using xnetlib

    SciTech Connect (OSTI)

    Dongarra, J.J. [Univ. of Tennessee, Knoxville, TN (US). Dept. of Computer Science]|[Oak Ridge National Lab., TN (US); Rowan, T.H. [Oak Ridge National Lab., TN (US); Wade, R.C. [Univ. of Tennessee, Knoxville, TN (US). Dept. of Computer Science

    1993-06-01T23:59:59.000Z

    Xnetlib is a new tool for software distribution. Whereas its predecessor netlib uses e-mail as the user interface to its large collection of public-domain mathematical software, xnetlib uses an X Window interface and socket-based communication. Xnetlib makes it easy to search through a large distributed collection of software and to retrieve requested software in seconds.

  9. Improve Overall Plant Efficiency and Fuel Use, Software Tools for Industry, Industrial Technologies Program (ITP) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2008-12-01T23:59:59.000Z

    This fact sheet describes how the Industrial Technologies Program combined heat and power (CHP) tool can help identify energy savings in gas turbine-driven systems.

  10. Applications (Grid Tools)

    E-Print Network [OSTI]

    Buyya, Rajkumar

    Grid Fabric Software Grid Applications Core Grid Middleware User-Level Middleware (Grid Tools) !"# $ %& ' ( ) * #& + '& ' , - . / # ) ) 0 # * 1 PDB CDB Grid Fabric Hardware &+ '' + ) , '1 '1 ' % - * # ( Grid Fabric Software Grid Applications Core Grid Middleware User-Level Middleware (Grid Tools) !"# $ %& ' ( ) * #& + '& ' , - . / # ) ) 0

  11. CESP Tool 9.1: Monitoring Plan Template | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China U.S. Department ofJune 2,The BigSidingState6 (2-91)A2015EnergyCESP Tool 9.1:

  12. Exploring JavaScript and ROOT technologies to create Web-based ATLAS analysis and monitoring tools

    E-Print Network [OSTI]

    Sanchez, Arturo; The ATLAS collaboration

    2015-01-01T23:59:59.000Z

    We explore the potentialities of current web applications to create online interfaces that allow the visualization, interaction and real physics cut-based analysis and monitoring of processes trough a web browser. The project consists in the initial development of web-based and cloud computing services to allow students and researches to perform fast and very useful cut-based analysis on a browser, reading and using real data and official Monte-Carlo simulations stored in ATLAS computing facilities. Several tools are considered: ROOT, JavaScript and HTML. Our study case is the current cut-based H->ZZ->llqq analysis of the ATLAS experiment. Preliminary but satisfactory results have been obtained online; this presentation describes the tests and plans and future upgrades.

  13. Exploring JavaScript and ROOT technologies to create Web-based ATLAS analysis and monitoring tools

    E-Print Network [OSTI]

    Sanchez, Arturo; The ATLAS collaboration

    2015-01-01T23:59:59.000Z

    We explore the potentialities of current web applications to create online interfaces that allow the visualization, interaction and real physics cut-based analysis and monitoring of processes trough a web browser. The project consists in the initial development of web-based and cloud computing services to allow students and researches to perform fast and very useful cut-based analysis on a browser, reading and using real data and official Monte-Carlo simulations stored in ATLAS computing facilities. Several tools are considered: ROOT, JavaScript and HTML. Our study case is the current cut-based $H \\rightarrow ZZ \\rightarrow llqq$ analysis of the ATLAS experiment. Preliminary but satisfactory results have been obtained online.

  14. AC 2011-732: INTEGRATING NASA SCIENCE AND ENGINEERING: US-ING AN INNOVATIVE SOFTWARE CURRICULUM DELIVERY TOOL

    E-Print Network [OSTI]

    for assisting teachers with performing engineering education and communicating robotics concepts to students Assistant Professor in the Depart- ment of Computer Science. Additionally, he acts as the Engineering and engineering through the use of LEGO Robotics and a new, interactive curriculum delivery tool called Robo

  15. Uniting software tools for the archival, management and analysis of linguistic data: lessons from developing the Language Data Repository

    E-Print Network [OSTI]

    Audenaert, Michael Neal

    2013-02-22T23:59:59.000Z

    and data management, discuss some of the current projects and tools in each of these areas, and present a summary of work currently being conducted by the Open Language Archive Community to support open web based access to the resources available...

  16. The power tool

    SciTech Connect (OSTI)

    HAYFIELD, J.P.

    1999-02-01T23:59:59.000Z

    POWER Tool--Planning, Optimization, Waste Estimating and Resourcing tool, a hand-held field estimating unit and relational database software tool for optimizing disassembly and final waste form of contaminated systems and equipment.

  17. Toward a Performance/Resilience Tool for Hardware/Software Co-Design of High-Performance Computing Systems

    SciTech Connect (OSTI)

    Engelmann, Christian [ORNL] [ORNL; Naughton, III, Thomas J [ORNL

    2013-01-01T23:59:59.000Z

    xSim is a simulation-based performance investigation toolkit that permits running high-performance computing (HPC) applications in a controlled environment with millions of concurrent execution threads, while observing application performance in a simulated extreme-scale system for hardware/software co-design. The presented work details newly developed features for xSim that permit the injection of MPI process failures, the propagation/detection/notification of such failures within the simulation, and their handling using application-level checkpoint/restart. These new capabilities enable the observation of application behavior and performance under failure within a simulated future-generation HPC system using the most common fault handling technique.

  18. Engineering Careers: Software Engineering

    E-Print Network [OSTI]

    Fenster, Sam

    of others When you screw up, you can do it on a massive scale #12;Totally unlike other engineering electronic device #12;Software tools Software engineers build their own tools The OS on your laptop;Just like other engineering Established body of knowledge Established practices Build on the work

  19. Achieving a "SIL 1" TCR Monitoring System

    E-Print Network [OSTI]

    Bartolomé, R; Scibile, L; Grau, S

    2001-01-01T23:59:59.000Z

    SIL 1 (Safety Integrity Level 1) refers to the quantification and measurement of the availability, reliability, maintenance and safety of the monitoring system. In the last few years the computer infrastructure used to acquire and to diffuse data to the TCR has evolved very rapidly. A number of measures in hardware, software and management have been introduced to cope with this situation. These include: the Multipurpose Monitoring Device (MMD), a standard data acquisition platform used in the renovation of old front end monitoring equipment, the Smart Equipment Controller (Dsec), a driver that reduces the layers in the data diffusion pyramid, the multiplatform monitoring software to integrate the different SCADA systems, a software configuration tool (RAZOR) for problem tracking and version control, and a complete development environment reproducing a real installation for thorough testing of any changes. To achieve SIL 1 objectives, while mastering the evolution of our systems will be the challenge for the c...

  20. EPA-GHG Inventory Targeted Data Collection Strategies and Software...

    Open Energy Info (EERE)

    EPA-GHG Inventory Targeted Data Collection Strategies and Software Tools (Redirected from US EPA GHG Inventory Targeted Data Collection Strategies and Software Tools) Jump to:...

  1. Comparative guide to emerging diagnostic tools for large commercial HVAC systems

    SciTech Connect (OSTI)

    Friedman, Hannah; Piette, Mary Ann

    2001-05-01T23:59:59.000Z

    This guide compares emerging diagnostic software tools that aid detection and diagnosis of operational problems for large HVAC systems. We have evaluated six tools for use with energy management control system (EMCS) or other monitoring data. The diagnostic tools summarize relevant performance metrics, display plots for manual analysis, and perform automated diagnostic procedures. Our comparative analysis presents nine summary tables with supporting explanatory text and includes sample diagnostic screens for each tool.

  2. Monitoring

    DOE Patents [OSTI]

    Orr, Christopher Henry (Calderbridge, GB); Luff, Craig Janson (Calderbridge, GB); Dockray, Thomas (Calderbridge, GB); Macarthur, Duncan Whittemore (Los Alamos, NM)

    2004-11-23T23:59:59.000Z

    The invention provides apparatus and methods which facilitate movement of an instrument relative to an item or location being monitored and/or the item or location relative to the instrument, whilst successfully excluding extraneous ions from the detection location. Thus, ions generated by emissions from the item or location can successfully be monitored during movement. The technique employs sealing to exclude such ions, for instance, through an electro-field which attracts and discharges the ions prior to their entering the detecting location and/or using a magnetic field configured to repel the ions away from the detecting location.

  3. Prism foil from an LCD monitor as a tool for teaching introductory optics This article has been downloaded from IOPscience. Please scroll down to see the full text article.

    E-Print Network [OSTI]

    Planin?iè, Gorazd

    Prism foil from an LCD monitor as a tool for teaching introductory optics This article has been foil from an LCD monitor as a tool for teaching introductory optics Gorazd Planinsic and Mihael used today. This paper describes the optical properties of the prism foil and several pedagogical

  4. Proceedings of the International Conference on Computational Biosciences and Bio-Informatics (ICCBBI 2011), July 2011, Bhubaneswar, India. A Software Tool for Information Management and Data Mining of Biological Data

    E-Print Network [OSTI]

    Baranauskas, José Augusto

    -Informatics (ICCBBI 2011), July 2011, Bhubaneswar, India. A Software Tool for Information Management and Data Mining resources. Understanding how organisms are able to adapt to difficult conditions and how organisms take of saving endangered species, produce effective environmental policies, and produce biological knowledge

  5. Structural Health Monitoring Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    both packages. 1. Download SHMTools.zip and mFUSE.zip from http:institute.lanl. goveisoftware-and-dataSHMTools 2. Extract SHMTools.zip into desired directory 3. Extract...

  6. Structural Health Monitoring Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our Instagram Secretary900SteepStrengthening northernDetermination ofTest

  7. Software Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreakingMayDepartment of Energy Ready,Smart GridAboutWindows and Building

  8. Software and Tools on Carver

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol HomeFacebookScholarship Fund3Biology| Nationalof big-data science Eric Pouyoul

  9. Software Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative JC3 RSS September 9,AwardGradsSites Pending Transfer toSocial Media

  10. Gammasphere software development. Progress report

    SciTech Connect (OSTI)

    Piercey, R.B.

    1994-01-01T23:59:59.000Z

    This report describes the activities of the nuclear physics group at Mississippi State University which were performed during 1993. Significant progress has been made in the focus areas: chairing the Gammasphere Software Working Group (SWG); assisting with the porting and enhancement of the ORNL UPAK histogramming software package; and developing standard formats for Gammasphere data products. In addition, they have established a new public ftp archive to distribute software and software development tools and information.

  11. SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration...

    Broader source: Energy.gov (indexed) [DOE]

    SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration Management Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration Management...

  12. SSST Module Slide 1: Hello, and welcome to this introduction on the Steam System Tool Suite.

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    ) that supports ITP's mission to improve the energy intensity of the U.S. industrial sector through a coordinated steam system pertaining to energy consumption, fuel type, unit costs, maintenance and energy monitoring training, publications, and software tools. Let's get started to show how to begin to develop a list

  13. Self-assembled software and method of overriding software execution

    DOE Patents [OSTI]

    Bouchard, Ann M.; Osbourn, Gordon C.

    2013-01-08T23:59:59.000Z

    A computer-implemented software self-assembled system and method for providing an external override and monitoring capability to dynamically self-assembling software containing machines that self-assemble execution sequences and data structures. The method provides an external override machine that can be introduced into a system of self-assembling machines while the machines are executing such that the functionality of the executing software can be changed or paused without stopping the code execution and modifying the existing code. Additionally, a monitoring machine can be introduced without stopping code execution that can monitor specified code execution functions by designated machines and communicate the status to an output device.

  14. Using Software Engineering Technology to Improve the Quality of Medical Processes*

    E-Print Network [OSTI]

    Avrunin, George S.

    .g., infusion pumps, radiation therapy machines, and patient monitoring devices), and software applications (e

  15. Engineering secure software 

    E-Print Network [OSTI]

    Jetly, Prateek

    2001-01-01T23:59:59.000Z

    breaches in the operating environment. Security breaches resulting from misuse or tnisconfiguration of the program should not be blamed on the software. T'his is a debatable position. A security breach that results from an unintentional enor... units with public key algorithms, private keys, and certificates. Any attempt to access or modify the data in these devices will render them unusable. The device contains software tools. These devices use the computer they reside on as a general...

  16. A direct path to dependable software

    E-Print Network [OSTI]

    Jackson, Daniel

    2009-01-01T23:59:59.000Z

    What would it take to make software more dependable? Until now, most approaches have been indirect: some practices – processes, tools or techniques – are used that are believed to yield dependable software, and the argument ...

  17. Master Pump Shutdown MPS Software Quality Assurance Plan (SQAP)

    SciTech Connect (OSTI)

    BEVINS, R.R.

    2000-09-20T23:59:59.000Z

    The MPSS Software Quality Assurance (SQAP) describes the tools and strategy used in the development of the MPSS software. The document also describes the methodology for controlling and managing changes to the software.

  18. ~On-Line Monitoring: Beth A. Schroeder

    E-Print Network [OSTI]

    Plale, Beth

    observers are not required to provide computational functionality. Second,the systemsaredesignedto monitor the target soft- ware and respondwhile the target software isoperational. This forcesthe monitoring system

  19. Preprint of paper published in Encyclopedia of Software Engineering, 2nd Edition, Wiley Interscience 2001.

    E-Print Network [OSTI]

    Grundy, John

    in software tools development. We provide a summary of tool applications during the software lifecycle engineers than ever before. The support of appropriate software tools is essential for developers and various likely future research trends in tools development. Introduction The demand for computer software

  20. ORISE: Media Analysis and Monitoring

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Media Analysis and Monitoring The Oak Ridge Institute for Science and Education (ORISE) uses comprehensive media analysis and monitoring tools to define media interest and the...

  1. Final Report: Correctness Tools for Petascale Computing

    SciTech Connect (OSTI)

    Mellor-Crummey, John [Rice University

    2014-10-27T23:59:59.000Z

    In the course of developing parallel programs for leadership computing systems, subtle programming errors often arise that are extremely difficult to diagnose without tools. To meet this challenge, University of Maryland, the University of Wisconsin—Madison, and Rice University worked to develop lightweight tools to help code developers pinpoint a variety of program correctness errors that plague parallel scientific codes. The aim of this project was to develop software tools that help diagnose program errors including memory leaks, memory access errors, round-off errors, and data races. Research at Rice University focused on developing algorithms and data structures to support efficient monitoring of multithreaded programs for memory access errors and data races. This is a final report about research and development work at Rice University as part of this project.

  2. SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Design...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Design Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Design Checklist This checklist is intended to...

  3. Building Energy Monitoring and Analysis

    SciTech Connect (OSTI)

    Hong, Tianzhen; Feng, Wei; Lu, Alison; Xia, Jianjun; Yang, Le; Shen, Qi; Im, Piljae; Bhandari, Mahabir

    2013-06-01T23:59:59.000Z

    This project aimed to develop a standard methodology for building energy data definition, collection, presentation, and analysis; apply the developed methods to a standardized energy monitoring platform, including hardware and software, to collect and analyze building energy use data; and compile offline statistical data and online real-time data in both countries for fully understanding the current status of building energy use. This helps decode the driving forces behind the discrepancy of building energy use between the two countries; identify gaps and deficiencies of current building energy monitoring, data collection, and analysis; and create knowledge and tools to collect and analyze good building energy data to provide valuable and actionable information for key stakeholders.

  4. Logical Structure Extraction from Software Requirements Documents

    E-Print Network [OSTI]

    Czarnecki, Krzysztof

    Documents I. INTRODUCTION Requirements management (RM) tools store and manipu- late software requirementsLogical Structure Extraction from Software Requirements Documents Rehan Rauf, Michal Antkiewicz,mantkiew,kczarnec}@gsd.uwaterloo.ca Abstract--Software requirements documents (SRDs) are often authored in general-purpose rich-text editors

  5. Proceedings of the Fifth Triennial Software Quality Forum 2000, Software for the Next Millennium, Software Quality Forum

    SciTech Connect (OSTI)

    Scientific Software Engineering Group, CIC-12

    2000-04-01T23:59:59.000Z

    The Software Quality Forum is a triennial conference held by the Software Quality Assurance Subcommittee for the Department of Energy's Quality Managers. The forum centers on key issues, information, and technology important in software development for the Nuclear Weapons Complex. This year it will be opened up to include local information technology companies and software vendors presenting their solutions, ideas, and lessons learned. The Software Quality Forum 2000 will take on a more hands-on, instructional tone than those previously held. There will be an emphasis on providing information, tools, and resources to assist developers in their goal of producing next generation software.

  6. Software: our quest for excellence. Honoring 50 years of software history, progress, and process

    SciTech Connect (OSTI)

    NONE

    1997-06-01T23:59:59.000Z

    The Software Quality Forum was established by the Software Quality Assurance (SQA) Subcommittee, which serves as a technical advisory group on software engineering and quality initiatives and issues for DOE`s quality managers. The forum serves as an opportunity for all those involved in implementing SQA programs to meet and share ideas and concerns. Participation from managers, quality engineers, and software professionals provides an ideal environment for identifying and discussing issues and concerns. The interaction provided by the forum contributes to the realization of a shared goal--high quality software product. Topics include: testing, software measurement, software surety, software reliability, SQA practices, assessments, software process improvement, certification and licensing of software professionals, CASE tools, software project management, inspections, and management`s role in ensuring SQA. The bulk of this document consists of vugraphs. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  7. Data Quality Monitoring of the CMS Silicon Strip Tracker Detector

    E-Print Network [OSTI]

    Leonardo Benucci

    2009-07-21T23:59:59.000Z

    The Physics and Data Quality Monitoring (DQM) framework aims at providing a homogeneous monitoring environment across various applications related to data taking at the CMS experiment. In this contribution, the DQM system for the Silicon Strip Tracker will be introduced. The set of elements to assess the status of detector will be mentioned, along with the way to identify problems and trace them to specific tracker elements. Monitoring tools, user interfaces and automated software will be briefly described. The system was used during extensive cosmic data taking of CMS in Autumn 2008, where it demonstrated to have a flexible and robust implementation and has been essential to improve the understanding of the detector. CMS collaboration believes that this tool is now mature to face the forthcoming data-taking era.

  8. Copyright (c) Cem Kaner, Automated Testing. 1 Software Test Automation:Software Test Automation

    E-Print Network [OSTI]

    Copyright (c) Cem Kaner, Automated Testing. 1 Software Test Automation:Software Test Automation: A RealA Real--World ProblemWorld Problem Cem Kaner, Ph.D., J.D. #12;Copyright (c) Cem Kaner, Automated Testing. 2 This TalkThis Talk The most widely used class of automated testing tools leads senior software

  9. Participatory Carbon Monitoring: Operational Guidance for National...

    Open Energy Info (EERE)

    Participatory Carbon Monitoring: Operational Guidance for National REDD+ Carbon Accounting Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Participatory Carbon...

  10. Energy Tracking Software Platform

    SciTech Connect (OSTI)

    Ryan Davis; Nathan Bird; Rebecca Birx; Hal Knowles

    2011-04-04T23:59:59.000Z

    Acceleration has created an interactive energy tracking and visualization platform that supports decreasing electric, water, and gas usage. Homeowners have access to tools that allow them to gauge their use and track progress toward a smaller energy footprint. Real estate agents have access to consumption data, allowing for sharing a comparison with potential home buyers. Home builders have the opportunity to compare their neighborhood's energy efficiency with competitors. Home energy raters have a tool for gauging the progress of their clients after efficiency changes. And, social groups are able to help encourage members to reduce their energy bills and help their environment. EnergyIT.com is the business umbrella for all energy tracking solutions and is designed to provide information about our energy tracking software and promote sales. CompareAndConserve.com (Gainesville-Green.com) helps homeowners conserve energy through education and competition. ToolsForTenants.com helps renters factor energy usage into their housing decisions.

  11. JSATS Decoder Software Manual

    SciTech Connect (OSTI)

    Flory, Adam E.; Lamarche, Brian L.; Weiland, Mark A.

    2013-05-01T23:59:59.000Z

    The Juvenile Salmon Acoustic Telemetry System (JSATS) Decoder is a software application that converts a digitized acoustic signal (a waveform stored in the .bwm file format) into a list of potential JSATS Acoustic MicroTransmitter (AMT) tagcodes along with other data about the signal including time of arrival and signal to noise ratios (SNR). This software is capable of decoding single files, directories, and viewing raw acoustic waveforms. When coupled with the JSATS Detector, the Decoder is capable of decoding in ‘real-time’ and can also provide statistical information about acoustic beacons placed within receive range of hydrophones within a JSATS array. This document details the features and functionality of the software. The document begins with software installation instructions (section 2), followed in order by instructions for decoder setup (section 3), decoding process initiation (section 4), then monitoring of beacons (section 5) using real-time decoding features. The last section in the manual describes the beacon, beacon statistics, and the results file formats. This document does not consider the raw binary waveform file format.

  12. Climate VISION: Resources and Links - Software Tools

    Office of Scientific and Technical Information (OSTI)

    that help manufacturers assess their plant's steam, compressed air, motor, and process heating systems. E-GRID eGRID is a comprehensive source of data on the environmental...

  13. Fenestration Software Tools | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently20,000 Russian NuclearandJunetrackEllen|JulyR--FOIADepartment ofBattlefield of6

  14. Fenestration Software Tools | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2: FinalOffers New Training on Energy6 Federalof Energy Federation

  15. Fenestration Software Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport inEnergy June 6-7, 2013 Meeting Federal RegisterCoal1Into High6Fenestration

  16. Sandia Energy - CSP Software & Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Scienceand RequirementsCoatings Initiated at PNNL's Sequim Bay CoatingsBuildingCRFApply

  17. The AirMaster+ Software Tool

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOriginEducationVideoStrategic| DepartmentDepartment ofTankTest Site2009Vehicle |APRILAudit

  18. AIRMaster+ Software Tool Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The Future of1 A Strategic Framework for SMRADepartmentAHAM CCEU.S.AIRMaster+

  19. AMO Software Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The Future of1 A Strategic Framework for8.pdfAL2008-07.pdf2Program

  20. Tools for Authentication

    SciTech Connect (OSTI)

    White, G

    2008-07-09T23:59:59.000Z

    Many recent Non-proliferation and Arms Control software projects include a software authentication component. In this context, 'authentication' is defined as determining that a software package performs only its intended purpose and performs that purpose correctly and reliably over many years. In addition to visual inspection by knowledgeable computer scientists, automated tools are needed to highlight suspicious code constructs both to aid the visual inspection and to guide program development. While many commercial tools are available for portions of the authentication task, they are proprietary, and have limited extensibility. An open-source, extensible tool can be customized to the unique needs of each project (projects can have both common and custom rules to detect flaws and security holes). Any such extensible tool must be based on a complete language compiler infrastructure, that is, one that can parse and digest the full language through its standard grammar. ROSE is precisely such a compiler infrastructure developed within DOE. ROSE is a robust source-to-source analysis and optimization infrastructure currently addressing large, million-line DOE applications in C, C++, and FORTRAN. This year, it has been extended to support the automated analysis of binaries. We continue to extend ROSE to address a number of security-specific requirements and apply it to software authentication for Non-proliferation and Arms Control projects. We will give an update on the status of our work.

  1. Evaluation of Technical Software for Microcomputers

    E-Print Network [OSTI]

    Schmidt, P. S.; Williams, M. A.

    1984-01-01T23:59:59.000Z

    Personal computers offer the potential for significantly easing the tasks of engineers and managers. Effective use of these powerful tools, however, requires good software. This paper describes a number of features affecting the usability...

  2. MIDAS : minor incident decision analysis software

    E-Print Network [OSTI]

    Horng, Tze-Chieh, 1964-

    2004-01-01T23:59:59.000Z

    MIDAS is the minor incident decision analysis software that acts as an advisory tool for plant decision makers and operators to analyze the available decision alternatives for resolving minor incidents. The minor incidents ...

  3. Screening Tool for Desiccant Dehumidification Applications

    E-Print Network [OSTI]

    Czachorski, M.; Worek, W. M.

    1998-01-01T23:59:59.000Z

    A state-of-the-art software tool that calculates the benefits of desiccant-based air-treatment equipment is described. The software, a Desiccant Systems Application Screening Tool, is written in the WindowsTM environment to promote user...

  4. Software Developers

    Broader source: Energy.gov [DOE]

    Because SEED will provide a common, open-source data framework, software developers will be able to write applications that access the data in a consistent way (with proper permissions), or build functionalities onto the SEED platform in a replicable way.

  5. Electronic authoring tools

    SciTech Connect (OSTI)

    Hurford, J.M.

    1987-01-01T23:59:59.000Z

    More than a decade ago, word processing software revolutionized the way documents were prepared, and productivity was increased. But the editing and formatting capabilities of most word processors did very little to prevent errors in spelling, typing, grammar, diction, style, or organization from slipping through to the final documents. In the past few years, the number of software tools that aid the author has increased substantially. They now vary in scope from simple spelling checkers to sophisticated diction analyzers and idea processors. Moreover, writing-aid-software described in this report is now available for many types of computing systems, including personal computers, scientific workstations, and mainframes. The various pieces of software can be used in interactive or non-interactive (batch) modes.

  6. Tools for charged Higgs bosons

    E-Print Network [OSTI]

    Oscar Stål

    2010-12-13T23:59:59.000Z

    We review the status of publicly available software tools applicable to charged Higgs physics. A selection of codes are highlighted in more detail, focusing on new developments that have taken place since the previous charged Higgs workshop in 2008. We conclude that phenomenologists now have the tools ready to face the LHC data. A new webpage collecting charged Higgs resources is presented.

  7. Machine tool locator

    DOE Patents [OSTI]

    Hanlon, John A. (Los Alamos, NM); Gill, Timothy J. (Stanley, NM)

    2001-01-01T23:59:59.000Z

    Machine tools can be accurately measured and positioned on manufacturing machines within very small tolerances by use of an autocollimator on a 3-axis mount on a manufacturing machine and positioned so as to focus on a reference tooling ball or a machine tool, a digital camera connected to the viewing end of the autocollimator, and a marker and measure generator for receiving digital images from the camera, then displaying or measuring distances between the projection reticle and the reference reticle on the monitoring screen, and relating the distances to the actual position of the autocollimator relative to the reference tooling ball. The images and measurements are used to set the position of the machine tool and to measure the size and shape of the machine tool tip, and examine cutting edge wear. patent

  8. Process for selecting engineering tools : applied to selecting a SysML tool.

    SciTech Connect (OSTI)

    De Spain, Mark J.; Post, Debra S. (Sandia National Laboratories, Livermore, CA); Taylor, Jeffrey L.; De Jong, Kent

    2011-02-01T23:59:59.000Z

    Process for Selecting Engineering Tools outlines the process and tools used to select a SysML (Systems Modeling Language) tool. The process is general in nature and users could use the process to select most engineering tools and software applications.

  9. Results From the Industrial Assessment Center (IAC) Steam Tool Benchmarking Support Project

    E-Print Network [OSTI]

    Wright, A. L.; Bassett, K.; Eckerlin, H.; Ganji, A.; Hengeveld, D.; Jendrucko, R.; Kosanovic, D.; Turner, W.

    The U. S. Department of Energy's (DOE) Office of Industrial Technology (OIT) BestPractices effort is developing a number of software tools to assist industrial energy users to improve the efficiency of their operations. One of the software tools...

  10. Software Group IBM Rational RequisitePro evaluators guide.

    E-Print Network [OSTI]

    set of software tools spanning the entire development lifecycle; and services to help indi- viduals and our product offerings. About IBM Rational software and the full lifecycle solution The IBM Rational. #12;Requirements management overview Application development is a complex undertak- ing. The software

  11. Application Driven Software Methodology for Automatic Compiler Generation

    E-Print Network [OSTI]

    Rus, Teodor

    happen in the AD, after the start of the software development lifecycle, modifications to requirements develop software tools that can execute the al- gorithms developed by AD experts without translating them requirements documents based on the customers wants and needs. The development of the software is immediately

  12. Demonstration of the APRON Processor Array Simulation Software

    E-Print Network [OSTI]

    Dudek, Piotr

    .barr@postgrad.manchester.ac.uk; p.dudek@manchester.ac.uk Abstract ­ A software tool for the development, prototyping and emulation a software system that can be used at all stages in the lifecycle of a CPA device. APRON (Array ProcessingDemonstration of the APRON Processor Array Simulation Software David R. W. Barr and Piotr Dudek

  13. International Conference on Human-Centered Software Engineering

    E-Print Network [OSTI]

    Noé, Reinhold

    models in HCSE Social and organizational aspects in the software development lifecycle Human-centric software development tools User profiles and mental models User requirements and design constraints UserHCSE 2014 5th International Conference on Human-Centered Software Engineering Paderborn, Germany

  14. A Decompilation Approach to Partitioning Software for Microprocessor/FPGA Platforms

    E-Print Network [OSTI]

    Stitt, Greg

    2011-01-01T23:59:59.000Z

    In this paper, we present a software compilation approach for microprocessor/FPGA platforms that partitions a software binary onto custom hardware implemented in the FPGA. Our approach imposes less restrictions on software tool flow than previous compiler approaches, allowing software designers to use any software language and compiler. Our approach uses a back-end partitioning tool that utilizes decompilation techniques to recover important high-level information, resulting in performance comparable to high-level compiler-based approaches.

  15. Software Architecture and Software Configuration Bernhard Westfechtel

    E-Print Network [OSTI]

    Westfechtel, Bernhard

    the software life cycle. In addition, it supports system building (creation of derived objects from support for the management of evolving software objects throughout the whole life cycle. Several problems architectures play a central role in the development and maintenance of a software system. A software

  16. Performance Engineering Technology for Scientific Component Software

    SciTech Connect (OSTI)

    Malony, Allen D.

    2007-05-08T23:59:59.000Z

    Large-scale, complex scientific applications are beginning to benefit from the use of component software design methodology and technology for software development. Integral to the success of component-based applications is the ability to achieve high-performing code solutions through the use of performance engineering tools for both intra-component and inter-component analysis and optimization. Our work on this project aimed to develop performance engineering technology for scientific component software in association with the DOE CCTTSS SciDAC project (active during the contract period) and the broader Common Component Architecture (CCA) community. Our specific implementation objectives were to extend the TAU performance system and Program Database Toolkit (PDT) to support performance instrumentation, measurement, and analysis of CCA components and frameworks, and to develop performance measurement and monitoring infrastructure that could be integrated in CCA applications. These objectives have been met in the completion of all project milestones and in the transfer of the technology into the continuing CCA activities as part of the DOE TASCS SciDAC2 effort. In addition to these achievements, over the past three years, we have been an active member of the CCA Forum, attending all meetings and serving in several working groups, such as the CCA Toolkit working group, the CQoS working group, and the Tutorial working group. We have contributed significantly to CCA tutorials since SC'04, hosted two CCA meetings, participated in the annual ACTS workshops, and were co-authors on the recent CCA journal paper [24]. There are four main areas where our project has delivered results: component performance instrumentation and measurement, component performance modeling and optimization, performance database and data mining, and online performance monitoring. This final report outlines the achievements in these areas for the entire project period. The submitted progress reports for the first two years describe those year's achievements in detail. We discuss progress in the last project period in this document. Deployment of our work in CCA components, frameworks, and applications is an important metric of success. We also summarize the project's accomplishments in this regard at the end of the report. A list of project publications is also given.

  17. Scalable Node Monitoring

    SciTech Connect (OSTI)

    Drotar, Alexander P. [Los Alamos National Laboratory; Quinn, Erin E. [Los Alamos National Laboratory; Sutherland, Landon D. [Los Alamos National Laboratory

    2012-07-30T23:59:59.000Z

    Project description is: (1) Build a high performance computer; and (2) Create a tool to monitor node applications in Component Based Tool Framework (CBTF) using code from Lightweight Data Metric Service (LDMS). The importance of this project is that: (1) there is a need a scalable, parallel tool to monitor nodes on clusters; and (2) New LDMS plugins need to be able to be easily added to tool. CBTF stands for Component Based Tool Framework. It's scalable and adjusts to different topologies automatically. It uses MRNet (Multicast/Reduction Network) mechanism for information transport. CBTF is flexible and general enough to be used for any tool that needs to do a task on many nodes. Its components are reusable and 'EASILY' added to a new tool. There are three levels of CBTF: (1) frontend node - interacts with users; (2) filter nodes - filters or concatenates information from backend nodes; and (3) backend nodes - where the actual work of the tool is done. LDMS stands for lightweight data metric servies. It's a tool used for monitoring nodes. Ltool is the name of the tool we derived from LDMS. It's dynamically linked and includes the following components: Vmstat, Meminfo, Procinterrupts and more. It works by: Ltool command is run on the frontend node; Ltool collects information from the backend nodes; backend nodes send information to the filter nodes; and filter nodes concatenate information and send to a database on the front end node. Ltool is a useful tool when it comes to monitoring nodes on a cluster because the overhead involved with running the tool is not particularly high and it will automatically scale to any size cluster.

  18. Building Energy Monitoring and Analysis

    SciTech Connect (OSTI)

    Hong, Tianzhen; Feng, Wei; Lu, Alison; Xia, Jianjun; Yang, Le; Shen, Qi; Im, Piljae; Bhandari, Mahabir

    2013-06-01T23:59:59.000Z

    U.S. and China are the world’s top two economics. Together they consumed one-third of the world’s primary energy. It is an unprecedented opportunity and challenge for governments, researchers and industries in both countries to join together to address energy issues and global climate change. Such joint collaboration has huge potential in creating new jobs in energy technologies and services. Buildings in the US and China consumed about 40% and 25% of the primary energy in both countries in 2010 respectively. Worldwide, the building sector is the largest contributor to the greenhouse gas emission. Better understanding and improving the energy performance of buildings is a critical step towards sustainable development and mitigation of global climate change. This project aimed to develop a standard methodology for building energy data definition, collection, presentation, and analysis; apply the developed methods to a standardized energy monitoring platform, including hardware and software, to collect and analyze building energy use data; and compile offline statistical data and online real-time data in both countries for fully understanding the current status of building energy use. This helps decode the driving forces behind the discrepancy of building energy use between the two countries; identify gaps and deficiencies of current building energy monitoring, data collection, and analysis; and create knowledge and tools to collect and analyze good building energy data to provide valuable and actionable information for key stakeholders.

  19. Building America Webinar: BEopt Optimization Tool and National...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Optimization Tool (BEopt) Training DOE Zero Energy Ready Home Webinar: Building Energy Optimization (BEopt) Software Analysis: Targeting Zero Net Energy - 2014 BTO Peer Review...

  20. New Framework Transforms FAST Wind Turbine Modeling Tool (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-04-01T23:59:59.000Z

    A recent overhaul of the tool makes it a powerful, robust, and flexible modeling software to aid the development of innovative wind and water power technologies.

  1. Software Engineering School COMSC

    E-Print Network [OSTI]

    Martin, Ralph R.

    management skills and performing key technical tasks in the software development lifecycle. The module and practices that are needed to develop software-intensive systems. Students will work on a software in the software lifecycle, and the pros and cons of different models of software construction to select

  2. Texas Rangeland Monitoring: Level Three

    E-Print Network [OSTI]

    Hanselka, C. Wayne; Hart, Charles R.; McGinty, Allan

    2006-10-09T23:59:59.000Z

    L-5455 10/06 Texas Rangeland Monitoring: Level Three C. Wayne Hanselka, Charles R. Hart and Allan McGinty* Monitoring is an essential tool in rangeland management. Monitoring is the way to determine whether goals are being achieved with current...

  3. Understanding and Improving Software Productivity

    E-Print Network [OSTI]

    Scacchi, Walt

    Understanding and Improving Software Productivity Walt Scacchi Institute for Software Research;2 Introduction · What affects software productivity? ­ Software productivity has been one of the most studied aspects of software engineering ­ Goal: review sample of empirical studies of software productivity

  4. UNFCCC-Consolidated baseline and monitoring methodology for landfill...

    Open Energy Info (EERE)

    UNFCCC-Consolidated baseline and monitoring methodology for landfill gas project activities Jump to: navigation, search Tool Summary LAUNCH TOOL Name: UNFCCC-Consolidated baseline...

  5. Measurement and Monitoring of the World's Forests: A Review and...

    Open Energy Info (EERE)

    Measurement and Monitoring of the World's Forests: A Review and Summary of Remote Sensing Technical Capability, 2009-2015 Jump to: navigation, search Tool Summary LAUNCH TOOL Name:...

  6. Demonstration of Data Center Energy Use Prediction Software

    SciTech Connect (OSTI)

    Coles, Henry; Greenberg, Steve; Tschudi, William

    2013-09-30T23:59:59.000Z

    This report documents a demonstration of a software modeling tool from Romonet that was used to predict energy use and forecast energy use improvements in an operating data center. The demonstration was conducted in a conventional data center with a 15,500 square foot raised floor and an IT equipment load of 332 kilowatts. It was cooled using traditional computer room air handlers and a compressor-based chilled water system. The data center also utilized an uninterruptible power supply system for power conditioning and backup. Electrical energy monitoring was available at a number of locations within the data center. The software modeling tool predicted the energy use of the data center?s cooling and electrical power distribution systems, as well as electrical energy use and heat removal for the site. The actual energy used by the computer equipment was recorded from power distribution devices located at each computer equipment row. The model simulated the total energy use in the data center and supporting infrastructure and predicted energy use at energy-consuming points throughout the power distribution system. The initial predicted power levels were compared to actual meter readings and were found to be within approximately 10 percent at a particular measurement point, resulting in a site overall variance of 4.7 percent. Some variances were investigated, and more accurate information was entered into the model. In this case the overall variance was reduced to approximately 1.2 percent. The model was then used to predict energy use for various modification opportunities to the data center in successive iterations. These included increasing the IT equipment load, adding computer room air handler fan speed controls, and adding a water-side economizer. The demonstration showed that the software can be used to simulate data center energy use and create a model that is useful for investigating energy efficiency design changes.

  7. Validating the Melusine Gamma Spectroscopy Tool

    SciTech Connect (OSTI)

    Erikson, Luke E.; Keillor, Martin E.; Stavenger, Timothy J.

    2013-11-26T23:59:59.000Z

    This technical report describes testing to evaluate the gamma spectroscopy tool, Melusine, under development by Pacific Northwest National Laboratory. The goal was to verify that the software can successfully be used to provide accurate results and statistical uncertainties for the detection of isotopes of interest and their activities. Of special interest were spectra similar to those produced by radionuclide stations that contribute to the Comprehensive Nuclear Test Ban Treaty Organization’s International Monitoring System. Two data sets were used to test Melusine’s capabilities. The first was the result of a multi-lab calibration effort based on neutron activations produced at the University of California at Davis. The second was taken from the Proficiency Test Exercises conducted by the CTBTO directly in 2005. In 37 of 42 cases, Melusine produced results in agreement with the best answer presently available, in most cases with calculated uncertainties comparable to or better than competing analyses. In fact, Melusine technically provided one more result than CTBTO’s PTE analyses that agreed with the “book answer” (Monte Carlo simulation). Despite these promising results, the Melusine software is still under development. Effort is especially needed to simplify its analysis process, improve stability, and provide user documentation. Some significant analysis tasks require further vetting, such as those to address summing effects. However, our test results indicate that Melusine’s calculations as presently implemented are sound and can be used to reliably analyze spectra from the CTBTO’s radionuclide stations.

  8. Designing supportability into software

    E-Print Network [OSTI]

    Shirolkar, Prashant A., 1973-

    2004-01-01T23:59:59.000Z

    Background: Despite the identification of a "software crisis" in the 1960s, large software projects are full of defects even today [19]. These defects cause the software to behave unexpectedly. The cause generally is ...

  9. Designing security into software

    E-Print Network [OSTI]

    Zhang, Chang Tony

    2006-01-01T23:59:59.000Z

    When people talk about software security, they usually refer to security applications such as antivirus software, firewalls and intrusion detection systems. There is little emphasis on the security in the software itself. ...

  10. Evaluation of Emerging Diagnostic Tools for Commercial HVAC Systems

    E-Print Network [OSTI]

    Friedman, H.; Piette, M. A.

    2001-01-01T23:59:59.000Z

    six tools in our analysis: Architectural Energy Corporation's ENFORMA? software, Facility Dynamics Engineering's Performance And Continuous Re-commissioning Analysis Tool (PACRAT), Pacific Northwest National Laboratory's Whole Building Diagnostician...

  11. Vulnerability Discovery with Attack IEEE Transactions on Software Engineering (2010)

    E-Print Network [OSTI]

    Bae, Doo-Hwan

    2010-01-01T23:59:59.000Z

    : Monitor target system's state while executing attacks in 3 ways Overview of tool AJECT #12;Attack generate attacks in 4 ways Injection phase: Execute previously generated test cases(attacks) Monitoring

  12. Safety critical software development qualification

    SciTech Connect (OSTI)

    Marron, J. E. [Invensys Process Systems, 33 Commercial Street, Foxboro, MA 02035 (United States)

    2006-07-01T23:59:59.000Z

    With the increasing use of digital systems in control applications, customers must acquire appropriate expectations for software development and quality assurance procedures. Purchasers and users of digital systems need to understand the benefits to the supplier of effective quality systems. These systems consist not only of procedures but tools that enable automation. Without the use of automation, quality can not be assured. A software and systems quality program starts with the documents you are very familiar with. But these documents must define more than the final system. They must address specific development environment characteristics and testing capabilities. Starting with the RFP, some of the items that should be introduced are Software Configuration Management, regression testing and defect tracking. The digital system customer is in the best position to enforce the use of software and systems quality programs by including them in project requirements as early as the Purchase Order. The customer's understanding of the full scope and implementation of a software quality program is essential to achieving the quality necessary in nuclear projects, and, incidentally, completing those projects on schedule. (authors)

  13. SEKE2015 Call For Papers The 27th International Conference on Software Engineering and Knowledge Engineering

    E-Print Network [OSTI]

    Xu, Haiping

    Software Safety Software Security Software Engineering Case Study and Experience Reports Web-Based ToolsSEKE2015 Call For Papers The 27th International Conference on Software Engineering and Knowledge Engineering www.ksi.edu/seke/seke15.html (Alternate website: ksiresearchorg.ipage.com/seke/seke15.html

  14. Software | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    applications, such as simulation and modeling, computation, internet usage, and more. Argonne has both commercially available software and open-source (free) software. Browse both...

  15. Theory and Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Theory and Software Home People Science Highlights Publications Seminars & Meetings Opportunities Advisory Committee Theory and Software Group (X-ray Science Division) The Theory...

  16. The safety implications of emerging software paradigms

    SciTech Connect (OSTI)

    Suski, G.J.; Persons, W.L.; Johnson, G.L.

    1994-10-01T23:59:59.000Z

    This paper addresses some of the emerging software paradigms that may be used in developing safety-critical software applications. Paradigms considered in this paper include knowledge-based systems, neural networks, genetic algorithms, and fuzzy systems. It presents one view of the software verification and validation activities that should be associated with each paradigm. The paper begins with a discussion of the historical evolution of software verification and validation. Next, a comparison is made between the verification and validation processes used for conventional and emerging software systems. Several verification and validation issues for the emerging paradigms are discussed and some specific research topics are identified. This work is relevant for monitoring and control at nuclear power plants.

  17. CaveMan Enterprise version 1.0 Software Validation and Verification.

    SciTech Connect (OSTI)

    Hart, David

    2014-10-01T23:59:59.000Z

    The U.S. Department of Energy Strategic Petroleum Reserve stores crude oil in caverns solution-mined in salt domes along the Gulf Coast of Louisiana and Texas. The CaveMan software program has been used since the late 1990s as one tool to analyze pressure mea- surements monitored at each cavern. The purpose of this monitoring is to catch potential cavern integrity issues as soon as possible. The CaveMan software was written in Microsoft Visual Basic, and embedded in a Microsoft Excel workbook; this method of running the CaveMan software is no longer sustainable. As such, a new version called CaveMan Enter- prise has been developed. CaveMan Enterprise version 1.0 does not have any changes to the CaveMan numerical models. CaveMan Enterprise represents, instead, a change from desktop-managed work- books to an enterprise framework, moving data management into coordinated databases and porting the numerical modeling codes into the Python programming language. This document provides a report of the code validation and verification testing.

  18. Performance Health Monitoring of Large-Scale Systems

    SciTech Connect (OSTI)

    Rajamony, Ram

    2014-11-20T23:59:59.000Z

    This report details the progress made on the ASCR funded project Performance Health Monitoring for Large Scale Systems. A large-­?scale application may not achieve its full performance potential due to degraded performance of even a single subsystem. Detecting performance faults, isolating them, and taking remedial action is critical for the scale of systems on the horizon. PHM aims to develop techniques and tools that can be used to identify and mitigate such performance problems. We accomplish this through two main aspects. The PHM framework encompasses diagnostics, system monitoring, fault isolation, and performance evaluation capabilities that indicates when a performance fault has been detected, either due to an anomaly present in the system itself or due to contention for shared resources between concurrently executing jobs. Software components called the PHM Control system then build upon the capabilities provided by the PHM framework to mitigate degradation caused by performance problems.

  19. Percussion tool

    DOE Patents [OSTI]

    Reed, Teddy R.

    2006-11-28T23:59:59.000Z

    A percussion tool is described and which includes a housing mounting a tool bit; a reciprocally moveable hammer borne by the housing and which is operable to repeatedly strike the tool bit; and a reciprocally moveable piston enclosed within the hammer and which imparts reciprocal movement to the reciprocally moveable hammer.

  20. Final Technical Report - Center for Technology for Advanced Scientific Component Software (TASCS)

    SciTech Connect (OSTI)

    Sussman, Alan [University of Maryland

    2014-10-21T23:59:59.000Z

    This is a final technical report for the University of Maryland work in the SciDAC Center for Technology for Advanced Scientific Component Software (TASCS). The Maryland work focused on software tools for coupling parallel software components built using the Common Component Architecture (CCA) APIs. Those tools are based on the Maryland InterComm software framework that has been used in multiple computational science applications to build large-scale simulations of complex physical systems that employ multiple separately developed codes.

  1. Introduction to Software Engineering

    E-Print Network [OSTI]

    ? ) Concept of Operations (CONOPS) Software Requirements Requirements Engineering Processes System Models

  2. SOFTWARE ENGINEERING COMPUTER SCIENCE

    E-Print Network [OSTI]

    Bone, Gary

    SOFTWARE ENGINEERING COMPUTER SCIENCE ... What's the Difference? goeng1@mcmaster.ca www). Software Engineering covers the course content listed under Computer Science, with some additions. Software). Software Engineering students will graduate with a Bachelor of Engineering (B.Eng). Computer Science

  3. SRS BUILDER 1.0: An Upper Type CASE Tool For Requirement Specification

    E-Print Network [OSTI]

    Mandal, Ardhendu

    2011-01-01T23:59:59.000Z

    Software (SW) development is a labor intensive activity. Modern software projects generally have to deal with producing and managing large and complex software products. Developing such software has become an extremely challenging job not only because of inherent complexity, but also mainly for economic constraints unlike time, quality, maintainability concerns. Hence, developing modern software within the budget still remains as one of the main software crisis. The most significant way to reduce the software development cost is to use the Computer-Aided Software Engineering (CASE) tools over the entire Software Development Life Cycle (SDLC) process as substitute to expensive human labor cost. We think that automation of software development methods is a valuable support for the software engineers in coping with this complexity and for improving quality too. This paper demonstrates the newly developed CASE tools name "SRS Builder 1.0" for software requirement specification developed at our university laborato...

  4. Applying supply chain methodology to a centralized software licensing strategy

    E-Print Network [OSTI]

    Sheinbein, Rachel Felice, 1975-

    2004-01-01T23:59:59.000Z

    Eleven percent of companies spend between $150K and $200K per year per engineer on software development tools and nine percent spend more than $200K, according to a Silicon Integration Initiative/Gartner/EE Times study ...

  5. Effective software testing with a string-constraint solver

    E-Print Network [OSTI]

    Kie?un, Adam

    2009-01-01T23:59:59.000Z

    This dissertation presents techniques and tools for improving software reliability, by using an expressive string-constraint solver to make implementation-based testing more effective and more applicable. Concolic testing ...

  6. Competition on Software Verification University of Passau, Germany

    E-Print Network [OSTI]

    Beyer, Dirk

    and Analysis of Systems (TACAS). 1 Introduction The area of verification, in particular model checking, has). Several new and powerful software-verification tools became available, but they have not been comparedCompetition on Software Verification (SV-COMP) Dirk Beyer University of Passau, Germany Abstract

  7. Model-based Quality Assurance of Automotive Software

    E-Print Network [OSTI]

    Jurjens, Jan

    CASE tool by ETAS · Used in automotive industry · Event-driven operational model #12;Jan Jürjens et alModel-based Quality Assurance of Automotive Software Jan Jürjens1 , Daniel Reiss2 , David (Germany) #12;Jan Jürjens et al.: Model-based Quality Assurance of Automotive Software 2 The Problem (Meta

  8. Online Monitoring of Plant Assets in the Nuclear Industry

    SciTech Connect (OSTI)

    Nancy Lybeck; Vivek Agarwal; Binh Pham; Richard Rusaw; Randy Bickford

    2013-10-01T23:59:59.000Z

    Today’s online monitoring technologies provide opportunities to perform predictive and proactive health management of assets within many different industries, in particular the defense and aerospace industries. The nuclear industry can leverage these technologies to enhance safety, productivity, and reliability of the aging fleet of existing nuclear power plants. The U.S. Department of Energy’s Light Water Reactor Sustainability Program is collaborating with the Electric Power Research Institute’s (EPRI’s) Long-Term Operations program to implement online monitoring in existing nuclear power plants. Proactive online monitoring in the nuclear industry is being explored using EPRI’s Fleet-Wide Prognostic and Health Management (FW-PHM) Suite software, a set of web-based diagnostic and prognostic tools and databases that serves as an integrated health monitoring architecture. This paper focuses on development of asset fault signatures used to assess the health status of generator step-up transformers and emergency diesel generators in nuclear power plants. Asset fault signatures describe the distinctive features based on technical examinations that can be used to detect a specific fault type. Fault signatures are developed based on the results of detailed technical research and on the knowledge and experience of technical experts. The Diagnostic Advisor of the FW-PHM Suite software matches developed fault signatures with operational data to provide early identification of critical faults and troubleshooting advice that could be used to distinguish between faults with similar symptoms. This research is important as it will support the automation of predictive online monitoring techniques in nuclear power plants to diagnose incipient faults, perform proactive maintenance, and estimate the remaining useful life of assets.

  9. Enhanced safeguards via solution monitoring

    SciTech Connect (OSTI)

    Burr, T.; Wangen, L.

    1996-09-01T23:59:59.000Z

    Solution monitoring is defined as the essentially continuous monitoring of solution level, density, and temperature in all tanks in the process that contain, or could contain, safeguards-significant quantities of nuclear material. This report describes some of the enhancements that solution monitoring could make to international safeguards. The focus is on the quantifiable benefits of solution monitoring, but qualitatively, solution monitoring can be viewed as a form of surveillance. Quantitatively, solution monitoring can in some cases improve diversion detection probability. For example, the authors show that under certain assumptions, solution monitoring can be used to reduce the standard deviation of the annual material balance, {sigma}{sub MB}, from approximately 17 kg to approximately 4 kg. Such reduction in {sigma}{sub MB} will not always be possible, as they discuss. However, in all cases, solution monitoring would provide assurance that the measurement error models are adequate so that one has confidence in his estimate of {sigma}{sub MB}. Some of the results in this report were generated using data that were simulated with prototype solution monitoring software that they are developing. An accompanying document describes that software.

  10. Packet flow monitoring tool and method

    DOE Patents [OSTI]

    Thiede, David R [Richland, WA

    2009-07-14T23:59:59.000Z

    A system and method for converting packet streams into session summaries. Session summaries are a group of packets each having a common source and destination internet protocol (IP) address, and, if present in the packets, common ports. The system first captures packets from a transport layer of a network of computer systems, then decodes the packets captured to determine the destination IP address and the source IP address. The system then identifies packets having common destination IP addresses and source IP addresses, then writes the decoded packets to an allocated memory structure as session summaries in a queue.

  11. User' Software Manual

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MM-Group Home MMG Advisory Committees 4-ID-D Home Recent Publications Beamline Info Optics Instrumentation Software User Info FAQs 4-ID-D Beamline Software Manual Introduction...

  12. Agile project dynamics : a strategic project management approach to the study of large-scale software development using system dynamics

    E-Print Network [OSTI]

    Glaiel, Firas (Firas S.)

    2012-01-01T23:59:59.000Z

    Large-scale software engineering organizations have traditionally used plan-driven, heavyweight, waterfall-style approaches for the planning, execution, and monitoring of software development efforts. This approach often ...

  13. Solar Power Systems Web Monitoring

    E-Print Network [OSTI]

    Kumar, Bimal Aklesh

    2011-01-01T23:59:59.000Z

    All over the world the peak demand load is increasing and the load factor is decreasing year-by-year. The fossil fuel is considered insufficient thus solar energy systems are becoming more and more useful, not only in terms of installation but monitoring of these systems is very crucial. Monitoring becomes very important when there are a large number of solar panels. Monitoring would allow early detection if the output falls below required level or one of the solar panel out of 1000 goes down. In this study the target is to monitor and control a developed solar panel by using available internet foundation. This web-enabled software will provide more flexibility over the system such as transmitting data from panel to the host computer and disseminating information to relevant stake holders barring any geographical barrier. The software would be built around web server with dynamic HTML and JAVA, this paper presents the preliminary design of the proposed system.

  14. SOFTWARE EVOLUTION AND THE STAGED MODEL OF THE SOFTWARE LIFECYCLE

    E-Print Network [OSTI]

    1 SOFTWARE EVOLUTION AND THE STAGED MODEL OF THE SOFTWARE LIFECYCLE K. H. Bennett Research............................................................................................................11 1.5 Iterative software development ...............................................................................................................19 1.10 The stages of the software lifecycle

  15. Verification of the coupled fluid/solid transfer in a CASL grid-to-rod-fretting simulation : a technical brief on the analysis of convergence behavior and demonstration of software tools for verification.

    SciTech Connect (OSTI)

    Copps, Kevin D.

    2011-12-01T23:59:59.000Z

    For a CASL grid-to-rod fretting problem, Sandia's Percept software was used in conjunction with the Sierra Mechanics suite to analyze the convergence behavior of the data transfer from a fluid simulation to a solid mechanics simulation. An analytic function, with properties relatively close to numerically computed fluid approximations, was chosen to represent the pressure solution in the fluid domain. The analytic pressure was interpolated on a sequence of grids on the fluid domain, and transferred onto a separate sequence of grids in the solid domain. The error in the resulting pressure in the solid domain was measured with respect to the analytic pressure. The error in pressure approached zero as both the fluid and solids meshes were refined. The convergence of the transfer algorithm was limited by whether the source grid resolution was the same or finer than the target grid resolution. In addition, using a feature coverage analysis, we found gaps in the solid mechanics code verification test suite directly relevant to the prototype CASL GTRF simulations.

  16. Make the Most of Your Time: How Should the Analyst Work with Automated Traceability Tools?

    E-Print Network [OSTI]

    Dekhtyar, Alexander

    software engineer or analyst to make decisions or judgments based on the output of an automated tool. For example, a software architect may examine the outputs of a cost benefit analysis tool to decide on a particular architecture; a project manager may examine the output of a risk assessment tool to determine what

  17. Monitoring materials

    DOE Patents [OSTI]

    Orr, Christopher Henry (Calderbridge, GB); Luff, Craig Janson (Calderbridge, GB); Dockray, Thomas (Calderbridge, GB); Macarthur, Duncan Whittemore (Los Alamos, NM)

    2002-01-01T23:59:59.000Z

    The apparatus and method provide techniques for effectively implementing alpha and/or beta and/or gamma monitoring of items or locations as desired. Indirect alpha monitoring by detecting ions generated by alpha emissions, in conjunction with beta and/or gamma monitoring is provided. The invention additionally provides for screening of items prior to alpha monitoring using beta and/or gamma monitoring, so as to ensure that the alpha monitoring apparatus is not contaminated by proceeding direct to alpha monitoring of a heavily contaminated item or location. The invention provides additional versatility in the emission forms which can be monitored, whilst maintaining accuracy and avoiding inadvertent contamination.

  18. Performance Monitoring

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Optimization Performance Monitoring Performance Monitoring A redirector page has been set up without anywhere to redirect to. Last edited: 2014-08-25 14:37:27...

  19. Model Based Optimal Sensor Network Design for Condition Monitoring in an IGCC Plant

    SciTech Connect (OSTI)

    Kumar, Rajeeva; Kumar, Aditya; Dai, Dan; Seenumani, Gayathri; Down, John; Lopez, Rodrigo

    2012-12-31T23:59:59.000Z

    This report summarizes the achievements and final results of this program. The objective of this program is to develop a general model-based sensor network design methodology and tools to address key issues in the design of an optimal sensor network configuration: the type, location and number of sensors used in a network, for online condition monitoring. In particular, the focus in this work is to develop software tools for optimal sensor placement (OSP) and use these tools to design optimal sensor network configuration for online condition monitoring of gasifier refractory wear and radiant syngas cooler (RSC) fouling. The methodology developed will be applicable to sensing system design for online condition monitoring for broad range of applications. The overall approach consists of (i) defining condition monitoring requirement in terms of OSP and mapping these requirements in mathematical terms for OSP algorithm, (ii) analyzing trade-off of alternate OSP algorithms, down selecting the most relevant ones and developing them for IGCC applications (iii) enhancing the gasifier and RSC models as required by OSP algorithms, (iv) applying the developed OSP algorithm to design the optimal sensor network required for the condition monitoring of an IGCC gasifier refractory and RSC fouling. Two key requirements for OSP for condition monitoring are desired precision for the monitoring variables (e.g. refractory wear) and reliability of the proposed sensor network in the presence of expected sensor failures. The OSP problem is naturally posed within a Kalman filtering approach as an integer programming problem where the key requirements of precision and reliability are imposed as constraints. The optimization is performed over the overall network cost. Based on extensive literature survey two formulations were identified as being relevant to OSP for condition monitoring; one based on LMI formulation and the other being standard INLP formulation. Various algorithms to solve these two formulations were developed and validated. For a given OSP problem the computation efficiency largely depends on the “size” of the problem. Initially a simplified 1-D gasifier model assuming axial and azimuthal symmetry was used to test out various OSP algorithms. Finally these algorithms were used to design the optimal sensor network for condition monitoring of IGCC gasifier refractory wear and RSC fouling. The sensors type and locations obtained as solution to the OSP problem were validated using model based sensing approach. The OSP algorithm has been developed in a modular form and has been packaged as a software tool for OSP design where a designer can explore various OSP design algorithm is a user friendly way. The OSP software tool is implemented in Matlab/Simulink© in-house. The tool also uses few optimization routines that are freely available on World Wide Web. In addition a modular Extended Kalman Filter (EKF) block has also been developed in Matlab/Simulink© which can be utilized for model based sensing of important process variables that are not directly measured through combining the online sensors with model based estimation once the hardware sensor and their locations has been finalized. The OSP algorithm details and the results of applying these algorithms to obtain optimal sensor location for condition monitoring of gasifier refractory wear and RSC fouling profile are summarized in this final report.

  20. Agile Development and Software Evolution

    E-Print Network [OSTI]

    Feitelson, Dror

    Agile Development and Software Evolution Dror Feitelson Basic Seminar on Software Engineering Hebrew University 2011 #12;Software Lifecycle Req's Analysis Design Construction Testing Transfer Maintenance Textbook view: #12;Software Lifecycle Req's Analysis Design Construction Testing Transfer

  1. HAZARD ANALYSIS SOFTWARE

    SciTech Connect (OSTI)

    Sommer, S; Tinh Tran, T

    2008-04-08T23:59:59.000Z

    Washington Safety Management Solutions, LLC developed web-based software to improve the efficiency and consistency of hazard identification and analysis, control selection and classification, and to standardize analysis reporting at Savannah River Site. In the new nuclear age, information technology provides methods to improve the efficiency of the documented safety analysis development process which includes hazard analysis activities. This software provides a web interface that interacts with a relational database to support analysis, record data, and to ensure reporting consistency. A team of subject matter experts participated in a series of meetings to review the associated processes and procedures for requirements and standard practices. Through these meetings, a set of software requirements were developed and compiled into a requirements traceability matrix from which software could be developed. The software was tested to ensure compliance with the requirements. Training was provided to the hazard analysis leads. Hazard analysis teams using the software have verified its operability. The software has been classified as NQA-1, Level D, as it supports the analysis team but does not perform the analysis. The software can be transported to other sites with alternate risk schemes. The software is being used to support the development of 14 hazard analyses. User responses have been positive with a number of suggestions for improvement which are being incorporated as time permits. The software has enforced a uniform implementation of the site procedures. The software has significantly improved the efficiency and standardization of the hazard analysis process.

  2. Queer Tools

    E-Print Network [OSTI]

    Hacker, Randi; Tsutsui, William

    2007-11-19T23:59:59.000Z

    Broadcast Transcript: Chindogu. Did someone say "Bless you?" No need. This is a Japanese word that means "queer tools" and it was coined to describe the Japanese penchant for unusual inventions. From toilet paper rolls that attach to the head...

  3. Workflow Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    at NERSC go here. Galaxy - Galaxy is a web based workflow tool that is use by the genomics community. It allows you to define job dependencies via a web based workflow engine....

  4. Tools | JCESR

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tools JCESR Logos Logos are available for download in jpg format. To view the full-size logo file, click the description under the version of the logo you are interested in. When...

  5. Engineering Management Approach to Software Production Plan, based on the Principles of Software Product Lines

    E-Print Network [OSTI]

    Shetty, Rama

    2005-12-16T23:59:59.000Z

    -phased process; inventory can be accumulated at different phases of a Software Development Life Cycle (SDLC), such as analysis, design, code, test etc. Hence, the cost of inventory is averaged over a standard period called ?release?, which could be monthly... examples (and is not a comprehensive list) of different tools that are used during the different phases of SDLC. SDLC Phase Tools Analysis Rational Rose Design Rational Rose, Together J Develop Together J, WSAD, Code Guide Test Win Runner...

  6. Tool Improves Electricity Demand Predictions to Make More Room...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Addthis Related Articles PNNL Reviews Wildlife-Interaction Monitoring for Offshore Wind Farms - Technology Hybrids Show Best Potential Updated Web Tool Focuses on Bottom Line...

  7. SAPHIRE 8 Software Quality Assurance Oversight

    SciTech Connect (OSTI)

    Kurt G. Vedros

    2011-09-01T23:59:59.000Z

    The software quality assurance oversight consists of updating and maintaining revision control of the SAPHIRE 8 quality assurance program documentation and of monitoring revision control of the SAPHIRE 8 source code. This report summarizes the oversight efforts through description of the revision control system (RCS) setup, operation and contents. Documents maintained under revision control include the Acceptance Test Plan (ATP), Configuration Management Plan, Quality Assurance Plan, Software Project Plan, Requirements Traceability Matrix (RTM), System Test Plan, SDP Interface Training Manual, and the SAPHIRE 8, 'New Features and Capabilities Overview'.

  8. Development of Open Source Software for Power Market Research: An Illustrative Case Study

    E-Print Network [OSTI]

    Tesfatsion, Leigh

    to penetrate the power industry; heavy reliance is still placed on closed-source commercial software packages in the software industry, such as for language development tools (e.g., NetBeans for Java), office document, Ames, IA 50011 USA. OSS is now widely used in the software industry, such as for language development

  9. Inventory and software distribution solutions for midsize businesses Buyer's guide: purchasing criteria

    E-Print Network [OSTI]

    Inventory and software distribution solutions for midsize businesses Buyer's guide: purchasing criteria Select inventory and software distribution tools that simplify PC and server management. March 2006 #12;2 Creating an accurate inventory of the hardware and software used throughout your

  10. A Map-Reduce Parallel Approach to Automatic Synthesis of Control Software

    E-Print Network [OSTI]

    Tronci, Enrico

    A Map-Reduce Parallel Approach to Automatic Synthesis of Control Software Vadim Alimguzhin12 Systems are indeed Software Based Control Systems, i.e. control systems whose controller consists De- sign approaches for automatic synthesis of control software. Available algorithms and tools (e

  11. Sandia National Laboratories ASCI Applications Software Quality Engineering Practices

    SciTech Connect (OSTI)

    ZEPPER, JOHN D.; ARAGON, KATHRYN MARY; ELLIS, MOLLY A.; BYLE, KATHLEEN A.; EATON, DONNA SUE

    2003-04-01T23:59:59.000Z

    This document provides a guide to the deployment of the software verification activities, software engineering practices, and project management principles that guide the development of Accelerated Strategic Computing Initiative (ASCI) applications software at Sandia National Laboratories (Sandia). The goal of this document is to identify practices and activities that will foster the development of reliable and trusted products produced by the ASCI Applications program. Document contents include an explanation of the structure and purpose of the ASCI Quality Management Council, an overview of the software development lifecycle, an outline of the practices and activities that should be followed, and an assessment tool.

  12. Evaluating Software Merge Quality Ahmed-Nacer Mehdi

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Terms Methodology, Experimentation, Automatic evaluation. Keywords Distributed Systems, Collaborative-prone activity but essential to large-scale software development. Developers use soft- ware merging tools proposes a methodology to measure the effort re- quired to use the result of a given merge tool. We employ

  13. SOFTWARE Open Access The dChip survival analysis module for microarray

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    survival risk, and these signatures are now increasingly being used in treatment decision for several of the existing software packages such as BRB-ArrayTools, Survival Online tool and Prediction AnalysisSOFTWARE Open Access The dChip survival analysis module for microarray data Samir B Amin1

  14. Terascale Simulation Tools and Technologies

    SciTech Connect (OSTI)

    Li, Xiaolin

    2007-03-09T23:59:59.000Z

    We report the development of front tracking method as a simulation tool and technology for the computation on several important SciDAC and SciDAC associated applications. The progress includes the extraction of an independent software library from the front tracking code, conservative front tracking, applications of front tracking to the simulation of fusion pellet injection in a magnetically confined plasma, the study of a fuel injection jet, and the study of fluid chaotic mixing, among other problems.

  15. ADVANCED MONITORING TO IMPROVE COMBUSTION TURBINE/COMBINED CYCLE CT/(CC) RELIABILITY, AVAILABILITY AND MAINTAINABILITY (RAM)

    SciTech Connect (OSTI)

    Leonard Angello

    2004-03-31T23:59:59.000Z

    Power generators are concerned with the maintenance costs associated with the advanced turbines that they are purchasing. Since these machines do not have fully established operation and maintenance (O&M) track records, power generators face financial risk due to uncertain future maintenance costs. This risk is of particular concern, as the electricity industry transitions to a competitive business environment in which unexpected O&M costs cannot be passed through to consumers. These concerns have accelerated the need for intelligent software-based diagnostic systems that can monitor the health of a combustion turbine in real time and provide valuable information on the machine's performance to its owner/operators. EPRI, Impact Technologies, Boyce Engineering, and Progress Energy have teamed to develop a suite of intelligent software tools integrated with a diagnostic monitoring platform that will, in real time, interpret data to assess the ''total health'' of combustion turbines. The Combustion Turbine Health Management System (CTHM) will consist of a series of dynamic link library (DLL) programs residing on a diagnostic monitoring platform that accepts turbine health data from existing monitoring instrumentation. The CTHM system will be a significant improvement over currently available techniques for turbine monitoring and diagnostics. CTHM will interpret sensor and instrument outputs, correlate them to a machine's condition, provide interpretative analyses, project servicing intervals, and estimate remaining component life. In addition, it will enable real-time anomaly detection and diagnostics of performance and mechanical faults, enabling power producers to more accurately predict critical component remaining useful life and turbine degradation.

  16. ADVANCED MONITORING TO IMPROVE COMBUSTION TURBINE/COMBINED CYCLE CT/(CC) RELIABILITY, AVAILABILITY AND MAINTAINABILITY (RAM)

    SciTech Connect (OSTI)

    Leonard Angello

    2004-09-30T23:59:59.000Z

    Power generators are concerned with the maintenance costs associated with the advanced turbines that they are purchasing. Since these machines do not have fully established operation and maintenance (O&M) track records, power generators face financial risk due to uncertain future maintenance costs. This risk is of particular concern, as the electricity industry transitions to a competitive business environment in which unexpected O&M costs cannot be passed through to consumers. These concerns have accelerated the need for intelligent software-based diagnostic systems that can monitor the health of a combustion turbine in real time and provide valuable information on the machine's performance to its owner/operators. EPRI, Impact Technologies, Boyce Engineering, and Progress Energy have teamed to develop a suite of intelligent software tools integrated with a diagnostic monitoring platform that will, in real time, interpret data to assess the ''total health'' of combustion turbines. The Combustion Turbine Health Management System (CTHM) will consist of a series of dynamic link library (DLL) programs residing on a diagnostic monitoring platform that accepts turbine health data from existing monitoring instrumentation. The CTHM system will be a significant improvement over currently available techniques for turbine monitoring and diagnostics. CTHM will interpret sensor and instrument outputs, correlate them to a machine's condition, provide interpretative analyses, project servicing intervals, and estimate remaining component life. In addition, it will enable real-time anomaly detection and diagnostics of performance and mechanical faults, enabling power producers to more accurately predict critical component remaining useful life and turbine degradation.

  17. Workflow Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengtheningWildfires may contribute more to &83 3.3 Table3WorkToolsTools

  18. New hardware, software boost unit performance

    SciTech Connect (OSTI)

    Not Available

    1990-02-01T23:59:59.000Z

    Hardware and software developed by the Electric Power Research Institute (EPRI) over the last several years can help utilities monitor the performance of fossil-fired powerplants, diagnose and correct operating problems, and detect equipment degradation at an early stage. These products, 19 in all, have been combined at Potomac Electric Power Co's (Pepco) Morgantown Unit 2 to form an integrated performance monitoring system that has already reduced heat rate by 100 Btu/kWh on a unit that historically has been one of the better-performing plants in the nation. Maintenance planning and unit capacity have improved as well. Additional benefits also are likely, according to EPRI.

  19. Plant computer applications 'design and implementation tools' set

    SciTech Connect (OSTI)

    Anikanov, S. S. [Westinghouse LLC, 4350 Northern Pike, Monroeville, PA 15146 (United States); Stolyetniy, I. V.; Tregubov, M. I.; Guslyakov, O. L.; Gladkov, Y. I. [Westron LLC, 1, Academic Proskura str., Kharkov (Ukraine)

    2006-07-01T23:59:59.000Z

    This paper describes functionality of the application programs' development tool, which is intended to support the full scope of the NPP plant computer applications' design process. The Application Development Tools' Set (ADTS), described in this paper, refers to a set of tools intended to capture functional requirements for applications and support design process from definition of design basis up to final testing of developed applications. There are several tools developed by Westinghouse that facilitate design of application software on different stages of design process. Those are: NAPDT - Nuclear Application Development Tool; SDODT - Simplified Display Object Development Tool; OPAL - Test case execution and documenting tool; The main idea of ADTS is to combine the aforementioned tools into one software environment with other Common out-of-shelf (COT) software to facilitate and expedite NPP plant computer applications. Combination of the software tools included into ADTS satisfies industry requirements for the application software intended for use in the Category B and C systems /2 - 4/. (authors)

  20. Intelligent Software Agents: Sensor Integration and Response

    SciTech Connect (OSTI)

    Kulesz, James J [ORNL; Lee, Ronald W [ORNL

    2013-01-01T23:59:59.000Z

    Abstract In a post Macondo world the buzzwords are Integrity Management and Incident Response Management. The twin processes are not new but the opportunity to link the two is novel. Intelligent software agents can be used with sensor networks in distributed and centralized computing systems to enhance real-time monitoring of system integrity as well as manage the follow-on incident response to changing, and potentially hazardous, environmental conditions. The software components are embedded at the sensor network nodes in surveillance systems used for monitoring unusual events. When an event occurs, the software agents establish a new concept of operation at the sensing node, post the event status to a blackboard for software agents at other nodes to see , and then react quickly and efficiently to monitor the scale of the event. The technology addresses a current challenge in sensor networks that prevents a rapid and efficient response when a sensor measurement indicates that an event has occurred. By using intelligent software agents - which can be stationary or mobile, interact socially, and adapt to changing situations - the technology offers features that are particularly important when systems need to adapt to active circumstances. For example, when a release is detected, the local software agent collaborates with other agents at the node to exercise the appropriate operation, such as: targeted detection, increased detection frequency, decreased detection frequency for other non-alarming sensors, and determination of environmental conditions so that adjacent nodes can be informed that an event is occurring and when it will arrive. The software agents at the nodes can also post the data in a targeted manner, so that agents at other nodes and the command center can exercise appropriate operations to recalibrate the overall sensor network and associated intelligence systems. The paper describes the concepts and provides examples of real-world implementations including the Threat Detection and Analysis System (TDAS) at the International Port of Memphis and the Biological Warning and Incident Characterization System (BWIC) Environmental Monitoring (EM) Component. Technologies developed for these 24/7 operational systems have applications for improved real-time system integrity awareness as well as provide incident response (as needed) for production and field applications.

  1. Research Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > TheNuclear Press ReleasesIn the Inorganic PV thrust, weSoftware &

  2. Applications of geographic information systems (GIS) in decision analysis for monitoring aquifer systems during oilfield development projects

    SciTech Connect (OSTI)

    Blundell, S.; Baldwin, D.O.; Anderson, N.J. [Integrated Geoscience, Inc., Helena, MT (United States)

    1996-06-01T23:59:59.000Z

    Geographic Information Systems (GIS) coupled with numerical ground water models provide a powerful Decision Support System (DSS) and visualization tool for monitoring aquifer systems during oilfield development projects. A GIS is a coupled software/hardware system that stores, processes, and displays a variety of data structures (raster, vector, TIN, CAD) that have been geographically referenced to some common map projection and coordinate system. Georeferencing allows the analyst to integrate diverse types of data layers into thematic maps for analysis of spatial trends and analyses. The integration of quasi 3-D numerical ground water models with GIS provides project managers with a Decision Support System (DSS) to assess potential impacts to aquifer systems during oilfield development projects. The rapid advancement in desktop PC computing power and data storage has allowed software developers to produce 32-bit GIS and data integration software applications. A variety of image processing, GIS, and numerical ground water modeling software will be used to demonstrate techniques for monitoring and visualizing the migration of an oilfield brine plume leaking during an oilfield development project. Emphasis will be placed on the integration of data structures and on database design to create a DSS within a desktop GIS to serve Project Managers during oilfield development.

  3. HEP-FCE Working Group on Libraries and Tools

    E-Print Network [OSTI]

    Anders Borgland; Peter Elmer; Michael Kirby; Simon Patton; Maxim Potekhin; Brett Viren; Brian Yanny

    2015-06-03T23:59:59.000Z

    This is a report from the Libraries and Tools Working Group of the High Energy Physics Forum for Computational Excellence. It presents the vision of the working group for how the HEP software community may organize and be supported in order to more efficiently share and develop common software libraries and tools across the world's diverse set of HEP experiments. It gives prioritized recommendations for achieving this goal and provides a survey of a select number of areas in the current HEP software library and tools landscape. The survey identifies aspects which support this goal and areas with opportunities for improvements. The survey covers event processing software frameworks, software development, data management, workflow and workload management, geometry information management and conditions databases.

  4. HEP-FCE Working Group on Libraries and Tools

    E-Print Network [OSTI]

    Borgland, Anders; Kirby, Michael; Patton, Simon; Potekhin, Maxim; Viren, Brett; Yanny, Brian

    2015-01-01T23:59:59.000Z

    This is a report from the Libraries and Tools Working Group of the High Energy Physics Forum for Computational Excellence. It presents the vision of the working group for how the HEP software community may organize and be supported in order to more efficiently share and develop common software libraries and tools across the world's diverse set of HEP experiments. It gives prioritized recommendations for achieving this goal and provides a survey of a select number of areas in the current HEP software library and tools landscape. The survey identifies aspects which support this goal and areas with opportunities for improvements. The survey covers event processing software frameworks, software development, data management, workflow and workload management, geometry information management and conditions databases.

  5. Tax Deduction Qualified Software

    Broader source: Energy.gov [DOE]

    On this page you'll find information about the EnergyGauge Summit version 3.20 (incorporating DOE-2.1E (v120)) qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings.

  6. Tax Deduction Qualified Software

    Broader source: Energy.gov [DOE]

    On this page you'll find information about the EnergyGauge Summit version 3.22 (incorporating DOE-2.1E (v120)) qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings.

  7. Tax Deduction Qualified Software

    Broader source: Energy.gov [DOE]

    On this page you'll find information about the EnergyGauge Summit version 3.21 (incorporating DOE-2.1E (v120)) qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings.

  8. Probabilistic Software Workshop Probabilistic Software Workshop

    E-Print Network [OSTI]

    such identification imply a recommendation or it imply that any of the materials, instruments or equipment identified products. · NIST Disclaimer: Certain commercial equipment, instruments, software programs, and materials the official position of the National Institute of Standards and Technology or the U.S. Department of Justice

  9. Defect Prevention and Detection in Software for Automated Test Equipment

    SciTech Connect (OSTI)

    E. Bean

    2006-11-30T23:59:59.000Z

    Software for automated test equipment can be tedious and monotonous making it just as error-prone as other software. Active defect prevention and detection are also important for test applications. Incomplete or unclear requirements, a cryptic syntax used for some test applications—especially script-based test sets, variability in syntax or structure, and changing requirements are among the problems encountered in one tester. Such problems are common to all software but can be particularly problematic in test equipment software intended to test another product. Each of these issues increases the probability of error injection during test application development. This report describes a test application development tool designed to address these issues and others for a particular piece of test equipment. By addressing these problems in the development environment, the tool has powerful built-in defect prevention and detection capabilities. Regular expressions are widely used in the development tool as a means of formally defining test equipment requirements for the test application and verifying conformance to those requirements. A novel means of using regular expressions to perform range checking was developed. A reduction in rework and increased productivity are the results. These capabilities are described along with lessons learned and their applicability to other test equipment software. The test application development tool, or “application builder”, is known as the PT3800 AM Creation, Revision and Archiving Tool (PACRAT).

  10. The Multi-Isotope Process (MIP) Monitor Project: FY12 Progress and Accomplishments

    SciTech Connect (OSTI)

    Coble, Jamie B.; Orton, Christopher R.; Jordan, David V.; Schwantes, Jon M.; Bender, Sarah; Dayman, Kenneth J.; Unlu, Kenan; Landsberger, Sheldon

    2012-09-27T23:59:59.000Z

    The Multi-Isotope Process (MIP) Monitor, being developed at Pacific Northwest National Laboratory (PNNL), provides an efficient approach to monitoring the process conditions in reprocessing facilities in support of the goal of "...(minimization of) the risks of nuclear proliferation and terrorism." The MIP Monitor measures distributions of a suite of indicator (radioactive) isotopes present within product and waste streams of a nuclear reprocessing facility. These indicator isotopes are monitored on-line by gamma spectrometry and compared, in near-real-time, to spectral patterns representing "normal" process conditions using multivariate pattern recognition software. The monitor utilizes this multivariate analysis and gamma spectroscopy of reprocessing streams to detect small changes in the gamma spectrum, which may indicate changes in process conditions. Multivariate analysis methods common in chemometrics, such as principal component analysis (PCA) and partial least squares regression (PLS), act as pattern recognition techniques, which can detect small deviations from the expected, nominal condition. By targeting multiple gamma-emitting indicator isotopes, the MIP Monitor approach is compatible with the use of small, portable, relatively high-resolution gamma detectors that may be easily deployed throughout an existing facility. The automated multivariate analysis can provide a level of data obscurity, giving a built-in information barrier to protect sensitive or proprietary operational data. Proof-of-concept simulations and experiments have been performed in previous years to demonstrate the validity of this tool in a laboratory setting. Development of the MIP Monitor approach continues to evaluate the efficacy of the monitor for automated, real-time or near-real-time application. This report details follow-on research and development efforts sponsored by the U.S. Department of Energy Fuel Cycle Research and Development related to the MIP Monitor for fiscal year 2012 (FY12).

  11. Interactive Software Technology 1/24 Interactive Software Technology

    E-Print Network [OSTI]

    Wegner, Peter

    Interactive Software Technology 1/24 Interactive Software Technology Peter Wegner, Brown University Paradigms 2. Models of Interaction 3. Software Engineering, Artificial Intelligence, and Open Systems 4. Object­oriented Design: Sequential Interaction 5. Multiple Interface Models: Concurrent Interaction 6

  12. A gestalt framework for virtual machine control of automated tools

    E-Print Network [OSTI]

    Moyer, Ilan Ellison

    2013-01-01T23:59:59.000Z

    Computer aided design has become affordable and ubiquitous, in part as a result of the development of open source design software and web-based 3D modeling tools. Consequently, a broad spectrum of individuals are expressing ...

  13. Downhole tool

    DOE Patents [OSTI]

    Hall, David R.; Muradov, Andrei; Pixton, David S.; Dahlgren, Scott Steven; Briscoe, Michael A.

    2007-03-20T23:59:59.000Z

    A double shouldered downhole tool connection comprises box and pin connections having mating threads intermediate mating primary and secondary shoulders. The connection further comprises a secondary shoulder component retained in the box connection intermediate a floating component and the primary shoulders. The secondary shoulder component and the pin connection cooperate to transfer a portion of makeup load to the box connection. The downhole tool may be selected from the group consisting of drill pipe, drill collars, production pipe, and reamers. The floating component may be selected from the group consisting of electronics modules, generators, gyroscopes, power sources, and stators. The secondary shoulder component may comprises an interface to the box connection selected from the group consisting of radial grooves, axial grooves, tapered grooves, radial protrusions, axial protrusions, tapered protrusions, shoulders, and threads.

  14. Foundational Tools for Petascale Computing

    SciTech Connect (OSTI)

    Miller, Barton

    2014-05-19T23:59:59.000Z

    The Paradyn project has a history of developing algorithms, techniques, and software that push the cutting edge of tool technology for high-end computing systems. Under this funding, we are working on a three-year agenda to make substantial new advances in support of new and emerging Petascale systems. The overall goal for this work is to address the steady increase in complexity of these petascale systems. Our work covers two key areas: (1) The analysis, instrumentation and control of binary programs. Work in this area falls under the general framework of the Dyninst API tool kits. (2) Infrastructure for building tools and applications at extreme scale. Work in this area falls under the general framework of the MRNet scalability framework. Note that work done under this funding is closely related to work done under a contemporaneous grant, “High-Performance Energy Applications and Systems”, SC0004061/FG02-10ER25972, UW PRJ36WV.

  15. SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM System Maintenance Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM More...

  16. Monitoring international nuclear activity

    SciTech Connect (OSTI)

    Firestone, R.B.

    2006-05-19T23:59:59.000Z

    The LBNL Table of Isotopes website provides primary nuclearinformation to>150,000 different users annually. We have developedthe covert technology to identify users by IP address and country todetermine the kinds of nuclear information they are retrieving. Wepropose to develop pattern recognition software to provide an earlywarning system to identify Unusual nuclear activity by country or regionSpecific nuclear/radioactive material interests We have monitored nuclearinformation for over two years and provide this information to the FBIand LLNL. Intelligence is gleaned from the website log files. Thisproposal would expand our reporting capabilities.

  17. Evolution Styles -Formal foundations and tool support for

    E-Print Network [OSTI]

    Evolution Styles - Formal foundations and tool support for software architecture evolution David-3890 Abstract Architecture evolution is a central feature of virtually all software systems. As new market almost no assistance in reasoning about questions such as: How should we stage the evolution to achieve

  18. Scalability of Non-intrusive Load Monitoring for Shipboard Applications

    E-Print Network [OSTI]

    Paris, James

    2009-01-01T23:59:59.000Z

    The non-intrusive load monitor has been demonstrated as an effective tool for evaluating and monitoring shipboard electro-mechanical systems through analysis of electrical power data. A key advantage of the non-intrusive ...

  19. Cycle isolation monitoring

    SciTech Connect (OSTI)

    Svensen, L.M. III; Zeigler, J.R.; Todd, F.D.; Alder, G.C. [Santee Copper, Moncks Corner, SC (United States)

    2009-07-15T23:59:59.000Z

    There are many factors to monitor in power plants, but one that is frequently overlooked is cycle isolation. Often this is an area where plant personnel can find 'low hanging fruit' with great return on investment, especially high energy valve leakage. This type of leakage leads to increased heat rate, potential valve damage and lost generation. The fundamental question to ask is 'What is 100 Btu/kW-hr of heat rate worth to your plant? On a 600 MW coal-fired power plant, a 1% leakage can lead to an 81 Btu/kW-hr impact on the main steam cycle and a 64 Btu/kW-hr impact on the hot reheat cycle. The article gives advice on methods to assist in detecting leaking valves and to monitor cycle isolation. A software product, TP. Plus-CIM was designed to estimate flow rates of potentially leaking valves.

  20. Software quality assurance handbook

    SciTech Connect (OSTI)

    Not Available

    1990-09-01T23:59:59.000Z

    There are two important reasons for Software Quality Assurance (SQA) at Allied-Signal Inc., Kansas City Division (KCD): First, the benefits from SQA make good business sense. Second, the Department of Energy has requested SQA. This handbook is one of the first steps in a plant-wide implementation of Software Quality Assurance at KCD. The handbook has two main purposes. The first is to provide information that you will need to perform software quality assurance activities. The second is to provide a common thread to unify the approach to SQA at KCD. 2 figs.

  1. Multiphase flow calculation software

    DOE Patents [OSTI]

    Fincke, James R. (Idaho Falls, ID)

    2003-04-15T23:59:59.000Z

    Multiphase flow calculation software and computer-readable media carrying computer executable instructions for calculating liquid and gas phase mass flow rates of high void fraction multiphase flows. The multiphase flow calculation software employs various given, or experimentally determined, parameters in conjunction with a plurality of pressure differentials of a multiphase flow, preferably supplied by a differential pressure flowmeter or the like, to determine liquid and gas phase mass flow rates of the high void fraction multiphase flows. Embodiments of the multiphase flow calculation software are suitable for use in a variety of applications, including real-time management and control of an object system.

  2. Workflow Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengtheningWildfires may contribute more to &83 3.3 Table3WorkTools

  3. Web-Based Project Management Tools

    E-Print Network [OSTI]

    Chapman, Clark R.

    Web-Based Project Management Tools Southwest Research Institute® San Antonio, Texas #12;With more any web browser; other client software is not required because the system resides on SwRI's web server using the PIMS include: Cassini (INMS) Deep Impact THEMIS AIM STEREO IMAGE Orbital Express CHIPS

  4. A Network Emulation Tool Kenneth Baclawski

    E-Print Network [OSTI]

    Baclawski, Kenneth B.

    Emulation Tool (NET) is a software sim- ulation of a computer network. NET is designed for research system. Two methods are provided for customizing NET to simulate a particular computer network. One can specify the parameters of a stan- dard network provided by NET, or one can program a new communication

  5. Software Quality Assurance

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-10-02T23:59:59.000Z

    To define requirements and responsibilities for software quality assurance (SQA) within the Department of Energy (DOE). DOE N 251.40, dated 5/3/01, extends this directive until 12/31/01.

  6. Software Quality Assurance

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-10-02T23:59:59.000Z

    DOE N 251.40, dated 5/3/01, extends this directive until 12/31/01. To define requirements and responsibilities for software quality assurance (SQA) within the Department of Energy (DOE). Does not cancel other directives.

  7. The Software Patent Debate 

    E-Print Network [OSTI]

    Guadamuz, Andres

    2006-01-01T23:59:59.000Z

    The paper discusses the proposed European Directive on the Patentability of Computer-Implemented Inventions and the subsequent debate that followed. Do software patents - as argued by policymakers' - result in increased ...

  8. Software Talk [Compatibility Mode

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    acquisitionanalysis software for Diffraction Beam Lines at SSRL spec SPECPLOT ICS WxDiff WebSpec First installation on BL 2-1 CSS spec Direct connection (SCSI) 3rd party user...

  9. Software Function Allocation Methodology

    E-Print Network [OSTI]

    O'Neal, Michael Ralph

    1988-01-01T23:59:59.000Z

    Necessary) Rapid Prototypes (Optional) 3. 4. 1 SFAM Step 1 ? Preparation If the Computer System Map (CSM) has not been created for the current overall hardware system, it is completed before the software function allocation process begins.... The methodology begins when the preconditions above have been met and the CSM is completed. The first step is to consult the list of software function allocation parameters provided as part of the methodology. The list of parameters will at first be sufficient...

  10. SPEE: A Secure Program Execution Environment Tool Using Static and Dynamic Code Verification

    E-Print Network [OSTI]

    Simha, Rahul

    SPEE: A Secure Program Execution Environment Tool Using Static and Dynamic Code Verification Olga those using the Internet and exploiting the vul- nerabilities in the software and applications, software ­ for software integrity protection and authentication and presents performance results. Our system architecture

  11. SAPHIRE 8 Software Project Plan

    SciTech Connect (OSTI)

    Curtis L.Smith; Ted S. Wood

    2010-03-01T23:59:59.000Z

    This project is being conducted at the request of the DOE and the NRC. The INL has been requested by the NRC to improve and maintain the Systems Analysis Programs for Hands-on Integrated Reliability Evaluation (SAPHIRE) tool set concurrent with the changing needs of the user community as well as staying current with new technologies. Successful completion will be upon NRC approved release of all software and accompanying documentation in a timely fashion. This project will enhance the SAPHIRE tool set for the user community (NRC, Nuclear Power Plant operations, Probabilistic Risk Analysis (PRA) model developers) by providing improved Common Cause Failure (CCF), External Events, Level 2, and Significance Determination Process (SDP) analysis capabilities. The SAPHIRE development team at the Idaho National Laboratory is responsible for successful completion of this project. The project is under the supervision of Curtis L. Smith, PhD, Technical Lead for the SAPHIRE application. All current capabilities from SAPHIRE version 7 will be maintained in SAPHIRE 8. The following additional capabilities will be incorporated: • Incorporation of SPAR models for the SDP interface. • Improved quality assurance activities for PRA calculations of SAPHIRE Version 8. • Continue the current activities for code maintenance, documentation, and user support for the code.

  12. Reference management software comparison There are a number of different types of software packages that you can use to manage the bibliographic details of information and the documents you find during your degree

    E-Print Network [OSTI]

    that you can use to manage the bibliographic details of information and the documents you find during yourReference management software comparison There are a number of different types of software packagesWorks and Reference Manager, but there are now several software packages or bookmarking tools online at no cost to you

  13. Managing a Software Ecosystem Using a Multiple Software Product Line

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Managing a Software Ecosystem Using a Multiple Software Product Line: a Case Study on Digital increases the number of software ecosystems: software platforms developed and maintained in a decentralized YourCast from a single system to a medium- scale ecosystem, we show how organizing it as a multiple

  14. Software Safety Tutorial Status Update 1 Software Safety Tutorial

    E-Print Network [OSTI]

    Tian, Jeff

    Software Safety Tutorial Status Update 1 Software Safety Tutorial (Status Update) Jeff Tian, tian@engr.smu.edu CSE, SMU, Dallas, TX 75275 Topics · Project Overview · Software Safety Overview · Project Tasks competency for real-time software engineers. · Project team: Jeff Tian (SMU): Basics of SSE D.T. Huynh

  15. Software Quality Model Requirements for Software Quality Engineering

    E-Print Network [OSTI]

    Suryn, Witold

    Quality Engineering needs a quality model that is usable throughout the software lifecycle, systematic, disciplined, quantifiable approach to the development and maintenance of quality of softwareSoftware Quality Model Requirements for Software Quality Engineering Marc-Alexis Côté M. Ing (marc

  16. Conserving Software-based Artwork through Software Engineering

    E-Print Network [OSTI]

    Marchese, Francis

    analysis, system and software design, its development, operation, and maintenance [1]. Software engineering role in software development within the aerospace, high technology, and financial service industries products to continue to be used. Maintenance is the longest process in the software engineering lifecycle

  17. The Evolution Matrix: Recovering Software Evolution using Software Visualization Techniques

    E-Print Network [OSTI]

    Nierstrasz, Oscar

    The Evolution Matrix: Recovering Software Evolution using Software Visualization Techniques Michele - ABSTRACT One of the major problems in software evolution is coping with the complexity which stems from and effective way to visualize the evolution of software systems which helps to recover the evolution of object

  18. Sandia National Laboratories ASCI Applications Software Quality Engineering Practices

    SciTech Connect (OSTI)

    ZEPPER, JOHN D.; ARAGON, KATHRYN MARY; ELLIS, MOLLY A.; BYLE, KATHLEEN A.; EATON, DONNA SUE

    2002-01-01T23:59:59.000Z

    This document provides a guide to the deployment of the software verification activities, software engineering practices, and project management principles that guide the development of Accelerated Strategic Computing Initiative (ASCI) applications software at Sandia National Laboratories (Sandia). The goal of this document is to identify practices and activities that will foster the development of reliable and trusted products produced by the ASCI Applications program. Document contents include an explanation of the structure and purpose of the ASCI Quality Management Council, an overview of the software development lifecycle, an outline of the practices and activities that should be followed, and an assessment tool. These sections map practices and activities at Sandia to the ASCI Software Quality Engineering: Goals, Principles, and Guidelines, a Department of Energy document.

  19. Mining Software Usage with the Automatic Library Tracking Database (ALTD)

    SciTech Connect (OSTI)

    Hadri, Bilel [ORNL; Fahey, Mark R [ORNL

    2013-01-01T23:59:59.000Z

    Tracking software usage is important for HPC centers, computer vendors, code developers and funding agencies to provide more efficient and targeted software support, and to forecast needs and guide HPC software effort towards the Exascale era. However, accurately tracking software usage on HPC systems has been a challenging task. In this paper, we present a tool called Automatic Library Tracking Database (ALTD) that has been developed and put in production on several Cray systems. The ALTD infrastructure prototype automatically and transparently stores information about libraries linked into an application at compilation time and also the executables launched in a batch job. We will illustrate the usage of libraries, compilers and third party software applications on a system managed by the National Institute for Computational Sciences.

  20. Mesh component design and software integration within SUMAA3d.

    SciTech Connect (OSTI)

    Freitag, L.

    1999-01-13T23:59:59.000Z

    The requirements of distributed-memory applications that use mesh management software tools are diverse, and building software that meets these requirements represents a considerable challenge. In this paper we discuss design requirements for a general, component approach for mesh management for use within the context of solving PDE applications on parallel computers. We describe recent efforts with the SUMAA3d package motivated by a component-based approach and show how these efforts have considerably improved both the flexibility and the usability of this software.

  1. Energy Consumption Tools Pack Leandro Fontoura Cupertino, Georges DaCosta,

    E-Print Network [OSTI]

    Lefèvre, Laurent

    Energy Consumption Library Data Acquisition Tool Data Monitoring Tool Energy Profiler 3 ConclusionsEnergy Consumption Tools Pack Leandro Fontoura Cupertino, Georges DaCosta, Amal Sayah, Jean Consumption Tools Pack 1 / 23 #12;Outline 1 Introduction Motivation Our proposal 2 Energy Consumption Tools

  2. Software Tool for Naval Surface Warfare Simulation and Training

    E-Print Network [OSTI]

    Dascalu, Sergiu

    and Engineering 1664 N. Virginia St., MS 171 Reno, NV, 89523, USA E-mail: dascalus@cse.unr.edu Phone: +1 University, MN, USA Department of Computer Science P.O. Box 5838, 103 Watkins Hall Winona, MN 55987, USA E, Reno, Department of Computer Science and Engineering 1664 N. Virginia St., MS 171, Reno, NV, 89523, USA

  3. A State Coverage Tool for JUnit Agitar Software Laboratories

    E-Print Network [OSTI]

    Pratt, Vaughan

    that sets an output variable (referred to as an output-defining statement, or ODS) which is not subsequently the test does not specify the behavior of an uncovered ODS, the ODS might be faulty or might become faulty coverage report, identifying all unchecked ODS. 1 http://junit.org Copyright is held by the author

  4. Geospatial Open Source Software As A Tool For

    E-Print Network [OSTI]

    on state-of-the-art techniques Same timing as similar commercial products Web-based cooperative development of deforestation in the Brazilian Amazon Emergency action planning Oil refineries and pipelines (Petrobras

  5. Software tools for elementary math education : animated mathematical proofs

    E-Print Network [OSTI]

    Mwangi, Timothy M

    2013-01-01T23:59:59.000Z

    The National Council of Teachers of Mathematics [6] has identified the learning of proofs as a critical goal for students from pre-kindergarten through grade 12 (p. 56). A proof for elementary students is not the highly ...

  6. Analytical Modeling Linking the FASTSim and ADOPT Software Tools

    Broader source: Energy.gov [DOE]

    2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  7. Design tool: a software for capturing design intent

    E-Print Network [OSTI]

    Velamakanni, Ravindra

    1999-01-01T23:59:59.000Z

    The central purpose of design is to create products that satisfy societal needs within specified constraints. This is a daunting task that involves making a large number of design decisions usually with insufficient information. This results...

  8. analysis software tools: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    version control systems that track the age, programmer, and purpose of the code, e.g., control ISDN lamps, fix hug in call forwarding; * static analyses, e.g., locations where...

  9. ORISE: Exercise Builder software tool helps DOE design and implement...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to produce custom exercise packages. Additional features of Exercise Builder include: Step-by-step, prompted assistance in developing the documents required for an exercise...

  10. ARKTOS: a knowledge engineering software tool for images

    E-Print Network [OSTI]

    Soh, L. K.; Tsatsoulis, Costas

    2002-12-01T23:59:59.000Z

    The goal of our ARKTOS project is to build an intelligent knowledge-based system to classify satellite sea ice images. It involves acquiring knowledge from sea ice experts, quantifying such knowledge as computational entities and ultimately building...

  11. International Journal on Software Tools for Technology Transfer

    E-Print Network [OSTI]

    Stølen, Ketil

    on petroleum installations. Keywords Security · Risk analysis · Change · Oil and gas 1 Introduction Changes exemplified within the oil and gas domain Atle Refsdal, Bjørnar Solhaug & Ketil Stølen #12;1 23 Your article of system changes exemplified within the oil and gas domain Atle Refsdal · Bjørnar Solhaug · Ketil Stølen

  12. Energy Analysis Models, Tools and Software Technologies Available for

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasRelease Date:researchEmerging ThreatsEmployment

  13. Information and interaction requirements for software tools supporting analogical design

    E-Print Network [OSTI]

    Töre Yarg?n, Gül?en; Crilly, Nathan

    2015-01-01T23:59:59.000Z

    of representation are more effective than others for certain creative tasks, affecting the quantity, quality, and diversity of ideas generated (Fischer, 1993; Yamamoto & Nakakoji, 2005; Sarkar & Chakrabarti, 2008; Cardoso & Badke-Schaub, 2011). Combining... . (2011). Fixation or Inspiration: Creative Problem Solving in Design. The Journal of Creative Behavior, 45(2), 77-82. Chakrabarti, A., Sarkar, P., Leelavathamma, B., & Nataraju, B. (2005). A functional representation for aiding biomimetic...

  14. Software Tools RFI and SEE Action: AMO Technical Assistance Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreakingMayDepartment of Energy Ready,Smart GridAbout

  15. Building Energy Tools Software Directory | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty EditCalifornia:Power LP Biomass Facility Jump to:Brunei: Energy3 WindBuilding

  16. ORISE: Exercise Builder software tool helps DOE design and implement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparencyDOE ProjectCrisis and RiskEnvironment At the Oakemergency

  17. Concept:U.S. National Software Tools | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovationinConcentrating Solar Power Basics (The followingsource History

  18. Software Tools for Analysis of Concentrated Solar Power Technologies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our Instagram Secretary Moniz9MorganYou are hereValueacquisition/analysis

  19. MotorMaster+ Software Tool Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment3311,OfficialProductsUptake and

  20. Energy Analysis Models, Tools and Software Technologies - Energy Innovation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisitingContractElectron-StateEnergyHeavy Duty Vehicle Efficiency Energy 101:

  1. The IceCube Data Acquisition Software: Lessons Learned during Distributed, Collaborative, Multi-Disciplined Software Development.

    SciTech Connect (OSTI)

    Beattie, Keith S; Beattie, Keith; Day Ph.D., Christopher; Glowacki, Dave; Hanson Ph.D., Kael; Jacobsen Ph.D., John; McParland, Charles; Patton Ph.D., Simon

    2007-09-21T23:59:59.000Z

    In this experiential paper we report on lessons learned during the development ofthe data acquisition software for the IceCube project - specifically, how to effectively address the unique challenges presented by a distributed, collaborative, multi-institutional, multi-disciplined project such as this. While development progress in software projects is often described solely in terms of technical issues, our experience indicates that non- and quasi-technical interactions play a substantial role in the effectiveness of large software development efforts. These include: selection and management of multiple software development methodologies, the effective useof various collaborative communication tools, project management structure and roles, and the impact and apparent importance of these elements when viewed through the differing perspectives of hardware, software, scientific and project office roles. Even in areas clearly technical in nature, success is still influenced by non-technical issues that can escape close attention. In particular we describe our experiences on software requirements specification, development methodologies and communication tools. We make observations on what tools and techniques have and have not been effective in this geographically disperse (including the South Pole) collaboration and offer suggestions on how similarly structured future projects may build upon our experiences.

  2. Tool coupling for the design and operation of building energy and control systems based on the Functional Mock-up Interface standard

    SciTech Connect (OSTI)

    Nouidui, Thierry Stephane; Wetter, Michael

    2014-03-01T23:59:59.000Z

    This paper describes software tools developed at the Lawrence Berkeley National Laboratory (LBNL) that can be coupled through the Functional Mock-up Interface standard in support of the design and operation of building energy and control systems. These tools have been developed to address the gaps and limitations encountered in legacy simulation tools. These tools were originally designed for the analysis of individual domains of buildings, and have been difficult to integrate with other tools for runtime data exchange. The coupling has been realized by use of the Functional Mock-up Interface for co-simulation, which standardizes an application programming interface for simulator interoperability that has been adopted in a variety of industrial domains. As a variety of coupling scenarios are possible, this paper provides users with guidance on what coupling may be best suited for their application. Furthermore, the paper illustrates how tools can be integrated into a building management system to support the operation of buildings. These tools may be a design model that is used for real-time performance monitoring, a fault detection and diagnostics algorithm, or a control sequence, each of which may be exported as a Functional Mock-up Unit and made available in a building management system as an input/output block. We anticipate that this capability can contribute to bridging the observed performance gap between design and operational energy use of buildings.

  3. Annual Environmental Monitoring Report Released | Department...

    Office of Environmental Management (EM)

    radioactivity. Visit http:www.cemp.dri.edu for more information on the off-site air monitoring program. "Each year, we use this report as one of our tools to inform the...

  4. Common Misconceptions about Software Architecture

    E-Print Network [OSTI]

    van der Hoek, André

    Common Misconceptions about Software Architecture by Philippe Kruchten Rational Fellow Rational Software Canada References to architecture are everywhere: in every article, in every ad. And we take definition of software architecture. Are we all understanding the same thing? We gladly accept that software

  5. Monitoring and Commissioning for Green Campuses

    E-Print Network [OSTI]

    Pietilainen, J.

    2014-01-01T23:59:59.000Z

    tool supporting tool in walk-through audits.  Indoor and outdoor thermography can be done during that one-day assessment"Level IV"Continuous & Monitoring Based Commissioning VTT Copyright © VTT Energy Auditing & Continuous Commissioning Owner O&M User...1International Conference for Enhanced Building Operations (ICEBO 2014) Tsinghua University, September 14-17, 2014, Beijing, China Jorma Pietiläinen, Senior Scientist Janne Peltonen, Senior Scientist Monitoring and Commissioning for Green Campuses...

  6. Enhancing User Customization through Novel Software Architecture for Utility Scale Solar Siting Software

    SciTech Connect (OSTI)

    Brant Peery; Sam Alessi; Randy Lee; Leng Vang; Scott Brown; David Solan; Dan Ames

    2014-06-01T23:59:59.000Z

    There is a need for a spatial decision support application that allows users to create customized metrics for comparing proposed locations of a new solar installation. This document discusses how PVMapper was designed to overcome the customization problem through the development of loosely coupled spatial and decision components in a JavaScript plugin architecture. This allows the user to easily add functionality and data to the system. The paper also explains how PVMapper provides the user with a dynamic and customizable decision tool that enables them to visually modify the formulas that are used in the decision algorithms that convert data to comparable metrics. The technologies that make up the presentation and calculation software stack are outlined. This document also explains the architecture that allows the tool to grow through custom plugins created by the software users. Some discussion is given on the difficulties encountered while designing the system.

  7. Do Process-Centred Environments Deserve Process-Centred Tools?

    E-Print Network [OSTI]

    Finkelstein, Anthony

    Do Process-Centred Environments Deserve Process-Centred Tools? Wolfgang Emmerich and Anthony|acwfg@cs.city.ac.uk Abstract. Process-centred software development environments inte- grate a process engine, which enacts a process program, with tools that automate particular tasks or provide facilities for document production

  8. Giri Narasimhan CGS 5166: Bioinformatics Tools [2 credits

    E-Print Network [OSTI]

    Narasimhan, Giri

    of Bioinformatics, Computational Biology and Biotechnology · Databases & Software Packages: GenBank, SWISSPROT, Bio in the use of Bioinformatics tools. It is meant for graduate students whose major is not Computer ScienceGiri Narasimhan CGS 5166: Bioinformatics Tools [2 credits] Spring 2007: Tu 11-12:15 in ECS 141

  9. Giri Narasimhan CGS 5166: Bioinformatics Tools [2 credits

    E-Print Network [OSTI]

    Narasimhan, Giri

    of Bioinformatics, Computational Biology and Biotechnology · Databases & Software Packages: GenBank, SWISSPROT, Bio in the use of Bioinformatics tools. It is meant for graduate students whose major is not Computer ScienceGiri Narasimhan CGS 5166: Bioinformatics Tools [2 credits] Spring 2006: Tu 11-12:15 in ECS 141

  10. Gravanom Software User's Guide

    SciTech Connect (OSTI)

    Sharma, B.

    1999-03-11T23:59:59.000Z

    Gravanom provides you with a simple, handy tool for modeling gravity data from 2-D geological structures on a personal computer.

  11. Self-assembling software generator

    DOE Patents [OSTI]

    Bouchard, Ann M. (Albuquerque, NM); Osbourn, Gordon C. (Albuquerque, NM)

    2011-11-25T23:59:59.000Z

    A technique to generate an executable task includes inspecting a task specification data structure to determine what software entities are to be generated to create the executable task, inspecting the task specification data structure to determine how the software entities will be linked after generating the software entities, inspecting the task specification data structure to determine logic to be executed by the software entities, and generating the software entities to create the executable task.

  12. Class 3 Tracking and Monitoring System Report

    SciTech Connect (OSTI)

    Safely, Eugene; Salamy, S. Phillip

    1999-11-29T23:59:59.000Z

    The objective of Class 3 tracking system are to assist DOE in tracking and performance and progress of these projects and to capture the technical and financial information collected during the projects' monitoring phase. The captured information was used by DOE project managers and BDM-Oklahoma staff for project monitoring and evaluation, and technology transfer activities. The proposed tracking system used the Class Evaluation Executive Report (CLEVER), a relation database for storing and disseminating class project data; GeoGraphix, a geological and technical analysis and mapping software system; the Tertiary Oil Recovery Information System (TORIS) database; and MS-Project, a project management software system.

  13. Tools | Department of Energy

    Office of Environmental Management (EM)

    Tools Tools logofemp.png The Federal Energy Management Program (FEMP) offers links to tools that can help agencies reduce energy use and meet federal laws and requirements. Tools...

  14. Ion Monitoring

    DOE Patents [OSTI]

    Orr, Christopher Henry (Calderbridge, GB); Luff, Craig Janson (Calderbridge, GB); Dockray, Thomas (Calderbridge, GB); Macarthur, Duncan Whittemore (Los Alamos, NM)

    2003-11-18T23:59:59.000Z

    The apparatus and method provide a technique for significantly reducing capacitance effects in detector electrodes arising due to movement of the instrument relative to the item/location being monitored in ion detection based techniques. The capacitance variations are rendered less significant by placing an electrically conducting element between the detector electrodes and the monitored location/item. Improved sensitivity and reduced noise signals arise as a result. The technique also provides apparatus and method suitable for monitoring elongate items which are unsuited to complete enclosure in one go within a chamber. The items are monitored part by part as the pass through the instrument, so increasing the range of items or locations which can be successfully monitored.

  15. Development of a Method for Quantifying the Reliability of Nuclear Safety-Related Software

    SciTech Connect (OSTI)

    Yi Zhang; Michael W. Golay

    2003-10-01T23:59:59.000Z

    The work of our project is intended to help introducing digital technologies into nuclear power into nuclear power plant safety related software applications. In our project we utilize a combination of modern software engineering methods: design process discipline and feedback, formal methods, automated computer aided software engineering tools, automatic code generation, and extensive feasible structure flow path testing to improve software quality. The tactics include ensuring that the software structure is kept simple, permitting routine testing during design development, permitting extensive finished product testing in the input data space of most likely service and using test-based Bayesian updating to estimate the probability that a random software input will encounter an error upon execution. From the results obtained the software reliability can be both improved and its value estimated. Hopefully our success in the project's work can aid the transition of the nuclear enterprise into the modern information world. In our work, we have been using the proprietary sample software, the digital Signal Validation Algorithm (SVA), provided by Westinghouse. Also our work is being done with their collaboration. The SVA software is used for selecting the plant instrumentation signal set which is to be used as the input the digital Plant Protection System (PPS). This is the system that automatically decides whether to trip the reactor. In our work, we are using -001 computer assisted software engineering (CASE) tool of Hamilton Technologies Inc. This tool is capable of stating the syntactic structure of a program reflecting its state requirements, logical functions and data structure.

  16. Review of Quantitative Software Reliability Methods

    SciTech Connect (OSTI)

    Chu, T.L.; Yue, M.; Martinez-Guridi, M.; Lehner, J.

    2010-09-17T23:59:59.000Z

    The current U.S. Nuclear Regulatory Commission (NRC) licensing process for digital systems rests on deterministic engineering criteria. In its 1995 probabilistic risk assessment (PRA) policy statement, the Commission encouraged the use of PRA technology in all regulatory matters to the extent supported by the state-of-the-art in PRA methods and data. Although many activities have been completed in the area of risk-informed regulation, the risk-informed analysis process for digital systems has not yet been satisfactorily developed. Since digital instrumentation and control (I&C) systems are expected to play an increasingly important role in nuclear power plant (NPP) safety, the NRC established a digital system research plan that defines a coherent set of research programs to support its regulatory needs. One of the research programs included in the NRC's digital system research plan addresses risk assessment methods and data for digital systems. Digital I&C systems have some unique characteristics, such as using software, and may have different failure causes and/or modes than analog I&C systems; hence, their incorporation into NPP PRAs entails special challenges. The objective of the NRC's digital system risk research is to identify and develop methods, analytical tools, and regulatory guidance for (1) including models of digital systems into NPP PRAs, and (2) using information on the risks of digital systems to support the NRC's risk-informed licensing and oversight activities. For several years, Brookhaven National Laboratory (BNL) has worked on NRC projects to investigate methods and tools for the probabilistic modeling of digital systems, as documented mainly in NUREG/CR-6962 and NUREG/CR-6997. However, the scope of this research principally focused on hardware failures, with limited reviews of software failure experience and software reliability methods. NRC also sponsored research at the Ohio State University investigating the modeling of digital systems using dynamic PRA methods. These efforts, documented in NUREG/CR-6901, NUREG/CR-6942, and NUREG/CR-6985, included a functional representation of the system's software but did not explicitly address failure modes caused by software defects or by inadequate design requirements. An important identified research need is to establish a commonly accepted basis for incorporating the behavior of software into digital I&C system reliability models for use in PRAs. To address this need, BNL is exploring the inclusion of software failures into the reliability models of digital I&C systems, such that their contribution to the risk of the associated NPP can be assessed.

  17. Timing system control software in the SLC

    SciTech Connect (OSTI)

    Thompson, K.; Phinney, N.

    1985-04-01T23:59:59.000Z

    A new timing system that allows precision (approx.1 to 2 ns) control of the trigger times of klystrons, beam position monitors, and other devices on a pulse-to-pulse basis at up to 360 Hz is in operation in the first third of the SLAC linear accelerator. The control software is divided between a central host VAX and local Intel 8086-based microprocessor clusters. Facilities exist to set up and adjust the timing of devices or groups of devices independently for beam pulses having different destinations and purposes, which are run in an interlaced fashion during normal machine operation. Upgrading of the system is currently underway, using a new version of the Programmable Delay Unit CAMAC module to allow pipelining of timing information for three machine pulses. An overview of the current state of the system is presented in this paper, with an emphasis on software control.

  18. Systematic Software Testing using VeriSoft: An Analysis of the 4ESS

    E-Print Network [OSTI]

    Godefroid, Patrice

    Systematic Software Testing using VeriSoft: An Analysis of the 4ESS Heart­Beat Monitor P. Godefroid; Systematic Software Testing using VeriSoft: An Analysis of the 4ESS Heart­Beat Monitor Patrice Godefroid Bell­fledged programming lan­ guages such as C or C++. We report in this paper our anal­ ysis with VeriSoft of the 4ESS

  19. The monitoring and verification of nuclear weapons

    SciTech Connect (OSTI)

    Garwin, Richard L., E-mail: RLG2@us.ibm.com [IBM Fellow Emeritus, IBM Thomas J. Watson Research Center, P.O. Box 218, Yorktown Heights, NY 10598 (United States)

    2014-05-09T23:59:59.000Z

    This paper partially reviews and updates the potential for monitoring and verification of nuclear weapons, including verification of their destruction. Cooperative monitoring with templates of the gamma-ray spectrum are an important tool, dependent on the use of information barriers.

  20. First Annual Conference on Intelligence Analysis Methods and Tools, May 2005 PNNL-SA-44274 Top Ten Needs for Intelligence Analysis Tool Development

    E-Print Network [OSTI]

    First Annual Conference on Intelligence Analysis Methods and Tools, May 2005 PNNL-SA-44274 Top Ten Needs for Intelligence Analysis Tool Development Richard V. Badalamente and Frank L. Greitzer Battelle implications for intelligence analysis software tool develop- ment. 1. Introduction and Background Intelligence

  1. Ground test accelerator control system software

    SciTech Connect (OSTI)

    Burczyk, L.; Dalesio, R.; Dingler, R.; Hill, J.; Howell, J.A.; Kerstiens, D.; King, R.; Kozubal, A.; Little, C.; Martz, V.; Rothrock, R.; Sutton, J.

    1988-01-01T23:59:59.000Z

    The GTA control system provides an environment in which the automation of a state-of-the-art accelerator can be developed. It makes use of commercially available computers, workstations, computer networks, industrial I/O equipment, and software. This system has built-in supervisory control (like most accelerator control systems), tools to support continuous control (like the process control industry), and sequential control for automatic startup and fault recovery (like few other accelerator control systems). Several software tools support these levels of control: a real-time operating system (VxWorks) with a real-time kernel (VRTX), a configuration database, a sequencer, and a graphics editor. VxWorks supports multitasking, fast context-switching, and preemptive scheduling. VxWorks/VRTX is a network-based development environment specifically designed to work in partnership with the UNIX operating system. A database provides the interface to the accelerator components. It consists of a run time library and a database configuration and editing tool. A sequencer initiates and controls the operation of all sequence programs (expressed as state programs). A graphics editor gives the user the ability to create color graphic displays showing the state of the machine in either text or graphics form. 11 refs., 2 figs.

  2. 242-A Control System device logic software documentation. Revision 2

    SciTech Connect (OSTI)

    Berger, J.F.

    1995-05-19T23:59:59.000Z

    A Distributive Process Control system was purchased by Project B-534. This computer-based control system, called the Monitor and Control System (MCS), was installed in the 242-A Evaporator located in the 200 East Area. The purpose of the MCS is to monitor and control the Evaporator and Monitor a number of alarms and other signals from various Tank Farm facilities. Applications software for the MCS was developed by the Waste Treatment System Engineering Group of Westinghouse. This document describes the Device Logic for this system.

  3. Web-Based Geographic Information System Tool for Accessing Hanford Site Environmental Data

    SciTech Connect (OSTI)

    Triplett, Mark B.; Seiple, Timothy E.; Watson, David J.; Charboneau, Briant L.; Morse, John G.

    2014-11-15T23:59:59.000Z

    Data volume, complexity, and access issues pose severe challenges for analysts, regulators and stakeholders attempting to efficiently use legacy data to support decision making at the U.S. Department of Energy’s (DOE) Hanford Site. DOE has partnered with the Pacific Northwest National Laboratory (PNNL) on the PHOENIX (PNNL-Hanford Online Environmental Information System) project, which seeks to address data access, transparency, and integration challenges at Hanford to provide effective decision support. PHOENIX is a family of spatially-enabled web applications providing quick access to decades of valuable scientific data and insight through intuitive query, visualization, and analysis tools. PHOENIX realizes broad, public accessibility by relying only on ubiquitous web-browsers, eliminating the need for specialized software. It accommodates a wide range of users with intuitive user interfaces that require little or no training to quickly obtain and visualize data. Currently, PHOENIX is actively hosting three applications focused on groundwater monitoring, groundwater clean-up performance reporting, and in-tank monitoring. PHOENIX-based applications are being used to streamline investigative and analytical processes at Hanford, saving time and money. But more importantly, by integrating previously isolated datasets and developing relevant visualization and analysis tools, PHOENIX applications are enabling DOE to discover new correlations hidden in legacy data, allowing them to more effectively address complex issues at Hanford.

  4. Electrostatic monitoring

    DOE Patents [OSTI]

    Orr, Christopher Henry (Cumbria, GB); Luff, Craig Janson (Cumbria, GB); Dockray, Thomas (Cumbria, GB); Macarthur, Duncan Whittemore (Los Alamos, NM)

    2001-01-01T23:59:59.000Z

    The apparatus and method provide a technique for more simply measuring alpha and/or beta emissions arising from items or locations. The technique uses indirect monitoring of the emissions by detecting ions generated by the emissions, the ions being attracted electrostatically to electrodes for discharge of collection. The apparatus and method employ a chamber which is sealed around the item or location during monitoring with no air being drawn into or expelled from the chamber during the monitoring process. A simplified structure and operations arises as a result, but without impairing the efficiency and accuracy of the detection technique.

  5. Software Engineering Course Notes

    E-Print Network [OSTI]

    Damon, Craig A.

    of too many managers is to chase away good people. 1. These roles may be split between technical with a manager. Managers have three roles in software development1: · people management · productivity management personnel research, Kristiansand, Norway. #12;22 Management Managing people Good people management

  6. Software Carpentry: Lessons Learned

    E-Print Network [OSTI]

    Greg Wilson

    2014-01-29T23:59:59.000Z

    Over the last 15 years, Software Carpentry has evolved from a week-long training course at the US national laboratories into a worldwide volunteer effort to raise standards in scientific computing. This article explains what we have learned along the way the challenges we now face, and our plans for the future.

  7. Software Carpentry: Lessons Learned

    E-Print Network [OSTI]

    Wilson, Greg

    2013-01-01T23:59:59.000Z

    Over the last 15 years, Software Carpentry has evolved from a week-long training course at the US national laboratories into a worldwide volunteer effort to raise standards in scientific computing. This article explains what we have learned along the way the challenges we now face, and our plans for the future.

  8. IBM Software Cross Industries

    E-Print Network [OSTI]

    and minimize cost with our experi- enced onshore and offshore teams. We can deliver the perfect technical of core functionality for Lotus and WebSphere Portal software. Our proof-of-concept solutions provide short, focused engagements to help you explore specific, client defined functionality. Business

  9. IBM Software Providesacomprehensivesolutionfor

    E-Print Network [OSTI]

    , companies must make sure that they're delivering products that meet their customers' requirements while companies address the challenges of embedded software development and delivery-- from initial product products, services and best practices to help companies define and manage their product development

  10. Vision of a Visualization Tool for Commissioning

    E-Print Network [OSTI]

    Isakson, P.; Eriksson, J.

    2004-01-01T23:59:59.000Z

    VISION OF A VISUALIZATION TOOL FOR COMMISSIONING Per Isakson*, J?rgen Eriksson** * Building Sciences KTH, Stockholm SWEDEN. per.isakson@byv.kth.se ** ?F-Installation, G?teborg, SWEDEN. jorgen.eriksson@af.se Summary. A prototype... of BEMS to support performance monitoring, nor considerable efforts to develop such use. In Sweden the control manufactures do not see a demand from the marketplace; on the contrary they observe little use of the tools they already provide. Research...

  11. SOFTWARE VERIFICATION RESEARCH CENTRE THE UNIVERSITY OF QUEENSLAND

    E-Print Network [OSTI]

    Lindsay, Peter

    in collaboration with Invensys SCADA De- velopment and it is discussed in relation to their current software, Australia. email: {voelzer, pal}@svrc.uq.edu.au Invensys SCADA development, PO Box 4009, Eight Mile Plains.2 Motivation and background Our framework and tool were developed in collaboration with the Invensys SCADA

  12. Deprogramming Large Software Systems Yohann Coppel and George Candea

    E-Print Network [OSTI]

    Candea, George

    Deprogramming Large Software Systems Yohann Coppel and George Candea School of Computer, patterns, and designs. Such reverse processes are powerful tools for manipu- lating programs and systems of access to the patterns and designs behind a body of code makes it difficult to maintain large code bases

  13. Practical Limits On Software Dependability: A Case Study

    E-Print Network [OSTI]

    Batson, Alan

    , dependence upon unqualified tools, the difficulty of verifying low-level code, and the limitations of testing how evidence arising from our effort supports the conclusion that the software we developed is fit and conclude in section 6. #12;y z Inner housing Flow Thrust bearing Motor x ImpellerInducer blades Diffuser

  14. Production-Run Software Failure Diagnosis via Hardware Performance Counters

    E-Print Network [OSTI]

    Sheridan, Jennifer

    Production-Run Software Failure Diagnosis via Hardware Performance Counters Joy Arulraj Po and huge financial loss during production runs. Tools that diagnose production-run failures with low is sometimes over 100%, for concurrency-bug failure diagnosis and hence are not suitable for production

  15. Harvesting Software Systems for MDA-Based Reengineering

    E-Print Network [OSTI]

    van Deursen, Arie

    Harvesting Software Systems for MDA-Based Reengineering Thijs Reus1 , Hans Geers2 , and Arie van- ing legacy systems towards a model-driven architecture (MDA). Steps in our approach consist of (1 tool that is based on Arc- Styler, the MDA environment provided by Interactive Objects. Our pa- per

  16. Software Requirements Specification Verifiable Fuel Cycle Simulation (VISION) Model

    SciTech Connect (OSTI)

    D. E. Shropshire; W. H. West

    2005-11-01T23:59:59.000Z

    The purpose of this Software Requirements Specification (SRS) is to define the top-level requirements for a Verifiable Fuel Cycle Simulation Model (VISION) of the Advanced Fuel Cycle (AFC). This simulation model is intended to serve a broad systems analysis and study tool applicable to work conducted as part of the AFCI (including costs estimates) and Generation IV reactor development studies.

  17. WILDFIRE IGNITION RESISTANCE ESTIMATOR WIZARD SOFTWARE DEVELOPMENT REPORT

    SciTech Connect (OSTI)

    Phillips, M.; Robinson, C.; Gupta, N.; Werth, D.

    2012-10-10T23:59:59.000Z

    This report describes the development of a software tool, entitled “WildFire Ignition Resistance Estimator Wizard” (WildFIRE Wizard, Version 2.10). This software was developed within the Wildfire Ignition Resistant Home Design (WIRHD) program, sponsored by the U. S. Department of Homeland Security, Science and Technology Directorate, Infrastructure Protection & Disaster Management Division. WildFIRE Wizard is a tool that enables homeowners to take preventive actions that will reduce their home’s vulnerability to wildfire ignition sources (i.e., embers, radiant heat, and direct flame impingement) well in advance of a wildfire event. This report describes the development of the software, its operation, its technical basis and calculations, and steps taken to verify its performance.

  18. Development of Open Source Software for Power Market Research: The AMES Test Bed

    E-Print Network [OSTI]

    Tesfatsion, Leigh

    the power industry; heavy reliance is still placed on closed-source commercial software packages. The OSS industry, such as for language development tools (e.g., NetBeans for Java), office document processors (e [2]; see Fig. 1. OSS is now widely used in the software industry, such as for language development

  19. Addressing Domain Evolution Challenges in Model-Driven Software Product-line Architectures

    E-Print Network [OSTI]

    Schmidt, Douglas C.

    Software Engineering Department Siemens Corporate Research Princeton, NJ 08540, USA lenz.gunther@siemens study that shows how a layered architecture and model-to-model transformation tool support can re- duce Transformation 1. Introduction Software product-line architectures (PLAs) [20] are a promising technology

  20. The GRAVITY instrument software / High-level software

    E-Print Network [OSTI]

    Burtscher, Leonard; Ott, Thomas; Kok, Yitping; Yazici, Senol; Anugu, Narsireddy; Dembet, Roderick; Fedou, Pierre; Lacour, Sylvestre; Ott, Juergen; Paumard, Thibaut; Lapeyrere, Vincent; Kervella, Pierre; Abuter, Roberto; Pozna, Eszter; Eisenhauer, Frank; Blind, Nicolas; Genzel, Reinhard; Gillessen, Stefan; Hans, Oliver; Haug, Marcus; Haussmann, Frank; Kellner, Stefan; Lippa, Magdalena; Pfuhl, Oliver; Sturm, Eckhard; Weber, Johannes; Amorim, Antonio; Brandner, Wolfgang; Rousselet-Perraut, Karine; Perrin, Guy S; Straubmeier, Christian; Schoeller, Markus

    2015-01-01T23:59:59.000Z

    GRAVITY is the four-beam, near- infrared, AO-assisted, fringe tracking, astrometric and imaging instrument for the Very Large Telescope Interferometer (VLTI). It is requiring the development of one of the most complex instrument software systems ever built for an ESO instrument. Apart from its many interfaces and interdependencies, one of the most challenging aspects is the overall performance and stability of this complex system. The three infrared detectors and the fast reflective memory network (RMN) recorder contribute a total data rate of up to 20 MiB/s accumulating to a maximum of 250 GiB of data per night. The detectors, the two instrument Local Control Units (LCUs) as well as the five LCUs running applications under TAC (Tools for Advanced Control) architecture, are interconnected with fast Ethernet, RMN fibers and dedicated fiber connections as well as signals for the time synchronization. Here we give a simplified overview of all subsystems of GRAVITY and their interfaces and discuss two examples of...

  1. Switchover software reliability estimate for Paducah Freezer/Sublimer computer systems

    SciTech Connect (OSTI)

    Flanagan, D.M.; Davis, J.N.

    1993-04-01T23:59:59.000Z

    K-25 Engineering Division purchased a series of redundant computer systems and developed software for the purpose of providing continuous process monitoring and control for the Freezer/Sublimer equipment in the gaseous diffusion process at the Paducah Gaseous Diffusion Plant. The application software is loaded on two central processing units (CPU) so that in the event of a failure of the primary unit, the processing can switch to the backup unit and continue processing without error. It is the purpose of this document to demonstrate the reliability of this system with respect to its ability to switch properly between redundant CPU. The total reliability estimation problem -- which considers the computer hardware, the operating system software, and the application software -- has been reduced to one that considers only the application software directly involved in the switchover process. Estimates are provided for software reliability and the testing coverage. Software and hardware reliability models and reliability growth models are considered in addition to Bayesian approaches.

  2. Software Platform Evaluation - Verifiable Fuel Cycle Simulation (VISION) Model

    SciTech Connect (OSTI)

    J. J. Jacobson; D. E. Shropshire; W. B. West

    2005-11-01T23:59:59.000Z

    The purpose of this Software Platform Evaluation (SPE) is to document the top-level evaluation of potential software platforms on which to construct a simulation model that satisfies the requirements for a Verifiable Fuel Cycle Simulation Model (VISION) of the Advanced Fuel Cycle (AFC). See the Software Requirements Specification for Verifiable Fuel Cycle Simulation (VISION) Model (INEEL/EXT-05-02643, Rev. 0) for a discussion of the objective and scope of the VISION model. VISION is intended to serve as a broad systems analysis and study tool applicable to work conducted as part of the AFCI (including costs estimates) and Generation IV reactor development studies. This document will serve as a guide for selecting the most appropriate software platform for VISION. This is a “living document” that will be modified over the course of the execution of this work.

  3. Software Patent Litigation ABA Section of Litigation

    E-Print Network [OSTI]

    Shamos, Michael I.

    1 Software Patent Litigation ABA Section of Litigation Intellectual Property Litigation Committee............................................................ 2 II. Infringement issues specific to software patents Relating to Software Patents.........................................................15 POSSIBLE ISSUES

  4. Mining Test Cases To Improve Software Maintenance

    E-Print Network [OSTI]

    Ziftci, Celal

    also known as software development lifecycle) is a set ofin the Software Development Lifecycle In the lifecycle of apart of the software development lifecycle, has many

  5. Software design of a general purpose data acquisition and control executive

    SciTech Connect (OSTI)

    Labiak, W.G.; Minor, E.G.

    1981-05-22T23:59:59.000Z

    The software design of an executive which performs general purpose data acquisition, monitoring, and control is presented. The executive runs on a memory-based mini or micro-computer and communicates with a disk-based computer where data analysis and display are done. The executive design stresses reliability and versatility, and has yielded software which can provide control and monitoring for widely different hardware systems. Applications of this software on two major fusion energy experiments at Lawrence Livermore National Laboratory will be described.

  6. ATLAS off-Grid sites (Tier 3) monitoring. From local fabric monitoring to global overview of the VO computing activities

    E-Print Network [OSTI]

    PETROSYAN, A; The ATLAS collaboration; BELOV, S; ANDREEVA, J; KADOCHNIKOV, I

    2012-01-01T23:59:59.000Z

    The ATLAS Distributed Computing activities have so far concentrated in the "central" part of the experiment computing system, namely the first 3 tiers (the CERN Tier0, 10 Tier1 centers and over 60 Tier2 sites). Many ATLAS Institutes and National Communities have deployed (or intend to) deploy Tier-3 facilities. Tier-3 centers consist of non-pledged resources, which are usually dedicated to data analysis tasks by the geographically close or local scientific groups, and which usually comprise a range of architectures without Grid middleware. Therefore a substantial part of the ATLAS monitoring tools which make use of Grid middleware, cannot be used for a large fraction of Tier3 sites. The presentation will describe the T3mon project, which aims to develop a software suite for monitoring the Tier3 sites, both from the perspective of the local site administrator and that of the ATLAS VO, thereby enabling the global view of the contribution from Tier3 sites to the ATLAS computing activities. Special attention in p...

  7. Software Engineering Craig A. Damon

    E-Print Network [OSTI]

    Damon, Craig A.

    ) greenfield vs. brownfield project features #12;Software EngineeringCIS4150-1 20 many roles contribute to s

  8. Software Verification and Validation Procedure

    SciTech Connect (OSTI)

    Olund, Thomas S.

    2008-09-15T23:59:59.000Z

    This Software Verification and Validation procedure provides the action steps for the Tank Waste Information Network System (TWINS) testing process. The primary objective of the testing process is to provide assurance that the software functions as intended, and meets the requirements specified by the client. Verification and validation establish the primary basis for TWINS software product acceptance.

  9. Internal dosimetry software comparison

    E-Print Network [OSTI]

    Fulmer, Judith Renee

    1992-01-01T23:59:59.000Z

    (ICRP) published in 1979 provided an improved approach for the assessment of internal dose. The ICRP recommendations were implemented in federal regulations promulgated by the Nuclear Regulatory Commission (NRC) in the Code of Federal Regulations (10... in the assessment of internal dose has led to the development of various computer software. In this study, several internal dosimetry codes were examined using a standard set of benchmark problems incorporating authentic exposure data. Personal computer...

  10. SGE: Software Presentation

    E-Print Network [OSTI]

    Nouanegue, H. F.; Daoud, A.; Lavigne, K.; Poulin, A.; Charette, A.; Lahala, S.; Sansregret, S.; Desbiens, G.

    2013-01-01T23:59:59.000Z

    ? Technologie, Hydro-Qu?bec Why SGE software is needed? > Increase energy efficiency in Commercial and Institutional Buildings > Optimize HVAC systems operation (Power demand and energy consumption) > Simplify and assist building operators 4 Groupe... of historical data 10 Groupe ? Technologie, Hydro-Qu?bec > What are operation indicators? ? Value calculated from combination of measurements, set points or others operation indicators ? Comparables values with power units or no unit ? 30 fixed defined...

  11. Benchmarking a Visual-Basic based multi-component one-dimensional reactive transport modeling tool

    E-Print Network [OSTI]

    Clement, Prabhakar

    Benchmarking a Visual-Basic based multi-component one-dimensional reactive transport modeling tool of a comprehensive numerical modeling tool, RT1D, which can be used for simulating biochemical and geochemical, and it does not require any additional software tools. The code can be easily adapted by others for simulating

  12. Monitoring well

    DOE Patents [OSTI]

    Hubbell, Joel M. (Idaho Falls, ID); Sisson, James B. (Idaho Falls, ID)

    2002-01-01T23:59:59.000Z

    The present invention relates to a monitoring well which includes an enclosure defining a cavity and a water reservoir enclosed within the cavity and wherein the reservoir has an inlet and an outlet. The monitoring well further includes a porous housing borne by the enclosure and which defines a fluid chamber which is oriented in fluid communication with the outlet of the reservoir, and wherein the porous housing is positioned in an earthen soil location below-grade. A geophysical monitoring device is provided and mounted in sensing relation relative to the fluid chamber of the porous housing; and a coupler is selectively moveable relative to the outlet of reservoir to couple the porous housing and water reservoir in fluid communication. An actuator is coupled in force transmitting relation relative to the coupler to selectively position the coupler in a location to allow fluid communication between the reservoir and the fluid chamber defined by the porous housing.

  13. TNA Data Collection Tool

    Broader source: Energy.gov [DOE]

    The TNA Data Collection Tool Instructions provides guidance on how to complete the TNA Data Collection Tool. The TNA Data Collection Tool is an Excel spreadsheet that the organization's designating training POC will use to populate their organizations training needs.

  14. Modeling and Evaluation of Geophysical Methods for Monitoring and Tracking CO2 Migration

    SciTech Connect (OSTI)

    Daniels, Jeff

    2012-11-30T23:59:59.000Z

    Geological sequestration has been proposed as a viable option for mitigating the vast amount of CO{sub 2} being released into the atmosphere daily. Test sites for CO{sub 2} injection have been appearing across the world to ascertain the feasibility of capturing and sequestering carbon dioxide. A major concern with full scale implementation is monitoring and verifying the permanence of injected CO{sub 2}. Geophysical methods, an exploration industry standard, are non-invasive imaging techniques that can be implemented to address that concern. Geophysical methods, seismic and electromagnetic, play a crucial role in monitoring the subsurface pre- and post-injection. Seismic techniques have been the most popular but electromagnetic methods are gaining interest. The primary goal of this project was to develop a new geophysical tool, a software program called GphyzCO2, to investigate the implementation of geophysical monitoring for detecting injected CO{sub 2} at test sites. The GphyzCO2 software consists of interconnected programs that encompass well logging, seismic, and electromagnetic methods. The software enables users to design and execute 3D surface-to-surface (conventional surface seismic) and borehole-to-borehole (cross-hole seismic and electromagnetic methods) numerical modeling surveys. The generalized flow of the program begins with building a complex 3D subsurface geological model, assigning properties to the models that mimic a potential CO{sub 2} injection site, numerically forward model a geophysical survey, and analyze the results. A test site located in Warren County, Ohio was selected as the test site for the full implementation of GphyzCO2. Specific interest was placed on a potential reservoir target, the Mount Simon Sandstone, and cap rock, the Eau Claire Formation. Analysis of the test site included well log data, physical property measurements (porosity), core sample resistivity measurements, calculating electrical permittivity values, seismic data collection, and seismic interpretation. The data was input into GphyzCO2 to demonstrate a full implementation of the software capabilities. Part of the implementation investigated the limits of using geophysical methods to monitor CO{sub 2} injection sites. The results show that cross-hole EM numerical surveys are limited to under 100 meter borehole separation. Those results were utilized in executing numerical EM surveys that contain hypothetical CO{sub 2} injections. The outcome of the forward modeling shows that EM methods can detect the presence of CO{sub 2}.

  15. Energino: a Hardware and Software Solution for Energy Consumption Monitoring

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    ­aware and energy­efficient protocols and algorithms for wireless networks. However, there is considerable dearth for designing energy efficient network protocols and architectures for broadband wireless access networks efficient protocols and algorithms for wireless networks. Nevertheless, energy consumption models used

  16. Intelligent Software Agents for Enhancing Sensor Networks Monitoring of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn Other NewsSpin andInterimInvoking anyIntelligentChanging

  17. Hipikat: A Project Memory for Software Development

    E-Print Network [OSTI]

    van der Hoek, André

    Hipikat: A Project Memory for Software Development Davor CCubranicc, Gail C. Murphy, Member, IEEE's usefulness in software modification tasks. One study evaluated the usefulness of Hipikat's recommendations Terms--Software development teams, project memory, software artifacts, recommender system, user studies

  18. Software is Discrete Mathematics University of Oklahoma

    E-Print Network [OSTI]

    Page, Rex L.

    , discrete mathematics, predicate logic, correctness proofs, formal methods, software engineering. 1Software is Discrete Mathematics Rex L Page University of Oklahoma School of Computer Science Descriptors D.2.4 [Software Engineering]: Software/Program Verification ­ correctness proofs, formal methods

  19. Interactive image quantification tools in nuclear material forensics

    SciTech Connect (OSTI)

    Porter, Reid B [Los Alamos National Laboratory; Ruggiero, Christy [Los Alamos National Laboratory; Hush, Don [Los Alamos National Laboratory; Harvey, Neal [Los Alamos National Laboratory; Kelly, Pat [Los Alamos National Laboratory; Scoggins, Wayne [Los Alamos National Laboratory; Tandon, Lav [Los Alamos National Laboratory

    2011-01-03T23:59:59.000Z

    Morphological and microstructural features visible in microscopy images of nuclear materials can give information about the processing history of a nuclear material. Extraction of these attributes currently requires a subject matter expert in both microscopy and nuclear material production processes, and is a time consuming, and at least partially manual task, often involving multiple software applications. One of the primary goals of computer vision is to find ways to extract and encode domain knowledge associated with imagery so that parts of this process can be automated. In this paper we describe a user-in-the-loop approach to the problem which attempts to both improve the efficiency of domain experts during image quantification as well as capture their domain knowledge over time. This is accomplished through a sophisticated user-monitoring system that accumulates user-computer interactions as users exploit their imagery. We provide a detailed discussion of the interactive feature extraction and segmentation tools we have developed and describe our initial results in exploiting the recorded user-computer interactions to improve user productivity over time.

  20. Software Framework for Advanced Power Plant Simulations

    SciTech Connect (OSTI)

    John Widmann; Sorin Munteanu; Aseem Jain; Pankaj Gupta; Mark Moales; Erik Ferguson; Lewis Collins; David Sloan; Woodrow Fiveland; Yi-dong Lang; Larry Biegler; Michael Locke; Simon Lingard; Jay Yun

    2010-08-01T23:59:59.000Z

    This report summarizes the work accomplished during the Phase II development effort of the Advanced Process Engineering Co-Simulator (APECS). The objective of the project is to develop the tools to efficiently combine high-fidelity computational fluid dynamics (CFD) models with process modeling software. During the course of the project, a robust integration controller was developed that can be used in any CAPE-OPEN compliant process modeling environment. The controller mediates the exchange of information between the process modeling software and the CFD software. Several approaches to reducing the time disparity between CFD simulations and process modeling have been investigated and implemented. These include enabling the CFD models to be run on a remote cluster and enabling multiple CFD models to be run simultaneously. Furthermore, computationally fast reduced-order models (ROMs) have been developed that can be 'trained' using the results from CFD simulations and then used directly within flowsheets. Unit operation models (both CFD and ROMs) can be uploaded to a model database and shared between multiple users.

  1. An Integrated Suite of Tools to support Human Factors Engineering

    SciTech Connect (OSTI)

    Jacques V Hugo

    2001-08-01T23:59:59.000Z

    Human Factors Engineering (HFE) work for the nuclear industry imposes special demands on the practitioner in terms of the scope, complexity and safety requirements for humans in nuclear installations. Unfortunately HFE lags behind other engineering disciplines in the development and use of modern, powerful tools for the full range of analysis and design processes. HFE does not appear to be an attractive market for software and hardware developers and as a result, HFE practitioners usually have to rely on inefficient general-purpose tools like standard office software, or they have to use expensive special-purpose tools that offer only part of the solution they require and which also do not easily integrate with other tools. There have been attempts to develop generic software tools to support the HFE analyst and also to achieve some order and consistency in format and presentation. However, in spite of many years of development, very few tools have emerged that have achieved these goals. This would suggest the need for special tools, but existing commercial products have been found inadequate and to date not a single tool has been developed that adequately supports the special requirements of HFE work for the nuclear industry. This paper describes an integrated suite of generic as well as purpose-built tools that facilitate information solicitation, issues tracking, work domain analysis, functional requirements analysis, function allocation, operational sequence analysis, task analysis and development of HSI design requirements. In combination, this suite of tools supports the analytical as well as the representational aspects of key HFE activities primarily for new NPPs, including capturing information from subject matter experts and various source documents directly into the appropriate tool and then linking, analyzing and extending that information further to represent detailed functional and task information, and ultimately HSI design requirements. The paper also describes a tool developed especially for functional requirements analysis, function allocation, and task analysis.

  2. SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    PROGRAM SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM Training Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM More Documents & Publications Quality Assurance Checklist...

  3. Software Quality Assurance Subcommittee : Guidelines for Requirements...

    Broader source: Energy.gov (indexed) [DOE]

    Software Quality Assurance Subcommittee : Guidelines for Requirements Management Software Quality Assurance Subcommittee : Guidelines for Requirements Management Requirements...

  4. Electronic Records Management Software Applications Design Criteria...

    Energy Savers [EERE]

    Electronic Records Management Software Applications Design Criteria Standard Electronic Records Management Software Applications Design Criteria Standard This Standard is reissued...

  5. Monitoring well

    DOE Patents [OSTI]

    Hubbell, Joel M. (Idaho Falls, ID); Sisson, James B. (Idaho Falls, ID)

    1999-01-01T23:59:59.000Z

    A monitoring well including a conduit defining a passageway, the conduit having a proximal and opposite, distal end; a coupler connected in fluid flowing relationship with the passageway; and a porous housing borne by the coupler and connected in fluid flowing relation thereto.

  6. Monitoring well

    DOE Patents [OSTI]

    Hubbell, J.M.; Sisson, J.B.

    1999-06-29T23:59:59.000Z

    A monitoring well is described which includes: a conduit defining a passageway, the conduit having a proximal and opposite, distal end; a coupler connected in fluid flowing relationship with the passageway; and a porous housing borne by the coupler and connected in fluid flowing relation thereto. 8 figs.

  7. Host Event Based Network Monitoring

    SciTech Connect (OSTI)

    Jonathan Chugg

    2013-01-01T23:59:59.000Z

    The purpose of INL’s research on this project is to demonstrate the feasibility of a host event based network monitoring tool and the effects on host performance. Current host based network monitoring tools work on polling which can miss activity if it occurs between polls. Instead of polling, a tool could be developed that makes use of event APIs in the operating system to receive asynchronous notifications of network activity. Analysis and logging of these events will allow the tool to construct the complete real-time and historical network configuration of the host while the tool is running. This research focused on three major operating systems commonly used by SCADA systems: Linux, WindowsXP, and Windows7. Windows 7 offers two paths that have minimal impact on the system and should be seriously considered. First is the new Windows Event Logging API, and, second, Windows 7 offers the ALE API within WFP. Any future work should focus on these methods.

  8. Development of Pattern Recognition Software for Tracks of Ionizing Radiation In Medipix2-Based

    E-Print Network [OSTI]

    Vilalta, Ricardo

    by a TimePix version of the hybrid semiconductor Medipix2 pixel detector system. Such a software tool would predict the type of source of radiation captured by the pixel detector device. Such tool would bridge classification of sources of ionizing radiation as captured by the hybrid semiconductor pixel detector Medipix2

  9. Sandia Energy - Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > TheNuclear PressLaboratorySoftware Home Climate & Earth Systems

  10. Software Talk [Compatibility Mode]

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our Instagram Secretary Moniz9MorganYou are hereValueacquisition/analysis software

  11. NERSC Software Downloads

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |IsLove Your1AllocationsNOVAPlayed Key Role in Workflow Software

  12. NERSC Software List

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |IsLove Your1AllocationsNOVAPlayed Key Role in Workflow Software

  13. Experience with Software Architectures and Configured Software Descriptions

    E-Print Network [OSTI]

    Scacchi, Walt

    our experience in the specification, design, implementation and evolution of software engineering a commercial DBMS). However, experience with the explicit specification of the architctural design of large

  14. Site Monitoring Area Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to the Site Monitoring Area (SMA) The Site Monitoring Area sampler Control measures (best management practices) installed at the Site Monitoring Area Structures such as...

  15. Remote and Centralized Monitoring of PV Power Csaba Kopacz, Sergiu Spataru, Dezso Sera, and Tamas Kerekes

    E-Print Network [OSTI]

    Sera, Dezso

    curve measurements from the inverters within each PV plant. The monitoring software stores the PVRemote and Centralized Monitoring of PV Power Plants Csaba Kopacz, Sergiu Spataru, Dezso Sera-cost and flexible monitoring system for PV plants. Compared to classical solutions which can require dedicated

  16. A Multi-Agent-Based Collaborative Framework for a Self-Managing Structural Health Monitoring System

    E-Print Network [OSTI]

    Stanford University

    for the monitoring of a 500 kW wind turbine in Germany. The long- term field instrumentation shows the practicability, Distributed Computing, Autonomous Computing, Wind Turbine Monitoring #12;2/38 Introduction Many civil a framework for monitoring the condition of civil infrastructure. A self-managing software framework based

  17. Tritium monitor

    DOE Patents [OSTI]

    Chastagner, Philippe (Augusta, GA)

    1994-01-01T23:59:59.000Z

    A system for continuously monitoring the concentration of tritium in an aqueous stream. The system pumps a sample of the stream to magnesium-filled combustion tube which reduces the sample to extract hydrogen gas. The hydrogen gas is then sent to an isotope separation device where it is separated into two groups of isotopes: a first group of isotopes containing concentrations of deuterium and tritium, and a second group of isotopes having substantially no deuterium and tritium. The first group of isotopes containing concentrations of deuterium and tritium is then passed through a tritium detector that produces an output proportional to the concentration of tritium detected. Preferably, the detection system also includes the necessary automation and data collection equipment and instrumentation for continuously monitoring an aqueous stream.

  18. Tritium monitor

    DOE Patents [OSTI]

    Chastagner, P.

    1994-06-14T23:59:59.000Z

    A system is described for continuously monitoring the concentration of tritium in an aqueous stream. The system pumps a sample of the stream to magnesium-filled combustion tube which reduces the sample to extract hydrogen gas. The hydrogen gas is then sent to an isotope separation device where it is separated into two groups of isotopes: a first group of isotopes containing concentrations of deuterium and tritium, and a second group of isotopes having substantially no deuterium and tritium. The first group of isotopes containing concentrations of deuterium and tritium is then passed through a tritium detector that produces an output proportional to the concentration of tritium detected. Preferably, the detection system also includes the necessary automation and data collection equipment and instrumentation for continuously monitoring an aqueous stream. 1 fig.

  19. Dynamic Cognitive Process Application of Blooms Taxonomy for Complex Software Design in the Cognitive Domain

    E-Print Network [OSTI]

    Kumar, NR Shashi; Selvarani, R

    2010-01-01T23:59:59.000Z

    Software design in Software Engineering is a critical and dynamic cognitive process. Accurate and flawless system design will lead to fast coding and early completion of a software project. Blooms taxonomy classifies cognitive domain into six dynamic levels such as Knowledge at base level to Comprehension, Application, Analysis, Synthesis and Evaluation at the highest level in the order of increasing complexity. A case study indicated in this paper is a gira system, which is a gprs based Intranet Remote Administration which monitors and controls the intranet from a mobile device. This paper investigates from this case study that the System Design stage in Software Engineering uses all the six levels of Blooms Taxonomy. The application of the highest levels of Blooms Taxonomy such as Synthesis and Evaluation in the design of gira indicates that Software Design in Software Development Life Cycle is a complex and critical cognitive process.

  20. Decision support software technology demonstration plan

    SciTech Connect (OSTI)

    SULLIVAN,T.; ARMSTRONG,A.

    1998-09-01T23:59:59.000Z

    The performance evaluation of innovative and alternative environmental technologies is an integral part of the US Environmental Protection Agency's (EPA) mission. Early efforts focused on evaluating technologies that supported the implementation of the Clean Air and Clean Water Acts. In 1986 the Agency began to demonstrate and evaluate the cost and performance of remediation and monitoring technologies under the Superfund Innovative Technology Evaluation (SITE) program (in response to the mandate in the Superfund Amendments and Reauthorization Act of 1986 (SARA)). In 1990, the US Technology Policy was announced. This policy placed a renewed emphasis on making the best use of technology in achieving the national goals of improved quality of life for all Americans, continued economic growth, and national security. In the spirit of the technology policy, the Agency began to direct a portion of its resources toward the promotion, recognition, acceptance, and use of US-developed innovative environmental technologies both domestically and abroad. Decision Support Software (DSS) packages integrate environmental data and simulation models into a framework for making site characterization, monitoring, and cleanup decisions. To limit the scope which will be addressed in this demonstration, three endpoints have been selected for evaluation: Visualization; Sample Optimization; and Cost/Benefit Analysis. Five topics are covered in this report: the objectives of the demonstration; the elements of the demonstration plan; an overview of the Site Characterization and Monitoring Technology Pilot; an overview of the technology verification process; and the purpose of this demonstration plan.

  1. DEVELOPMENT OF EMITTANCE ANALYSIS SOFTWARE FOR ION BEAM CHARACTERIZATION

    SciTech Connect (OSTI)

    Padilla, M. J.; Liu, Y.

    2007-01-01T23:59:59.000Z

    Transverse beam emittance is a crucial property of charged particle beams that describes their angular and spatial spread. It is a fi gure of merit frequently used to determine the quality of ion beams, the compatibility of an ion beam with a given beam transport system, and the ability to suppress neighboring isotopes at on-line mass separator facilities. Generally a high quality beam is characterized by a small emittance. In order to determine and improve the quality of ion beams used at the Holifi eld Radioactive Ion beam Facility (HRIBF) for nuclear physics and nuclear astrophysics research, the emittances of the ion beams are measured at the off-line Ion Source Test Facilities. In this project, emittance analysis software was developed to perform various data processing tasks for noise reduction, to evaluate root-mean-square emittance, Twiss parameters, and area emittance of different beam fractions. The software also provides 2D and 3D graphical views of the emittance data, beam profi les, emittance contours, and RMS. Noise exclusion is essential for accurate determination of beam emittance values. A Self-Consistent, Unbiased Elliptical Exclusion (SCUBEEx) method is employed. Numerical data analysis techniques such as interpolation and nonlinear fi tting are also incorporated into the software. The software will provide a simplifi ed, fast tool for comprehensive emittance analysis. The main functions of the software package have been completed. In preliminary tests with experimental emittance data, the analysis results using the software were shown to be accurate.

  2. Program Development Tools and Infrastructures

    SciTech Connect (OSTI)

    Schulz, M

    2012-03-12T23:59:59.000Z

    Exascale class machines will exhibit a new level of complexity: they will feature an unprecedented number of cores and threads, will most likely be heterogeneous and deeply hierarchical, and offer a range of new hardware techniques (such as speculative threading, transactional memory, programmable prefetching, and programmable accelerators), which all have to be utilized for an application to realize the full potential of the machine. Additionally, users will be faced with less memory per core, fixed total power budgets, and sharply reduced MTBFs. At the same time, it is expected that the complexity of applications will rise sharply for exascale systems, both to implement new science possible at exascale and to exploit the new hardware features necessary to achieve exascale performance. This is particularly true for many of the NNSA codes, which are large and often highly complex integrated simulation codes that push the limits of everything in the system including language features. To overcome these limitations and to enable users to reach exascale performance, users will expect a new generation of tools that address the bottlenecks of exascale machines, that work seamlessly with the (set of) programming models on the target machines, that scale with the machine, that provide automatic analysis capabilities, and that are flexible and modular enough to overcome the complexities and changing demands of the exascale architectures. Further, any tool must be robust enough to handle the complexity of large integrated codes while keeping the user's learning curve low. With the ASC program, in particular the CSSE (Computational Systems and Software Engineering) and CCE (Common Compute Environment) projects, we are working towards a new generation of tools that fulfill these requirements and that provide our users as well as the larger HPC community with the necessary tools, techniques, and methodologies required to make exascale performance a reality.

  3. COMPUTER ERGONOMIC REVIEW TOOL This tool was designed to provide step-by-step practical guidance to perform simple ergonomic

    E-Print Network [OSTI]

    Russell, Lynn

    COMPUTER ERGONOMIC REVIEW TOOL This tool was designed to provide step-by-step practical guidance to perform simple ergonomic workstation evaluations for computer users. Please use this form to determine how Marketplace at http://marketplace.ucsd.edu/ergonomic.asp for monitor risers, glare screens, screen cleaners

  4. Comparison of emerging diagnostic tools for large commercial HVAC systems

    SciTech Connect (OSTI)

    Friedman, Hannah; Piette, Mary Ann

    2001-04-06T23:59:59.000Z

    Diagnostic software tools for large commercial buildings are being developed to help detect and diagnose energy and other performance problems with building operations. These software applications utilize energy management control system (EMCS) trend log data. Due to the recent development of diagnostic tools, there has been little detailed comparison among the tools and a limited awareness of tool capabilities by potential users. Today, these diagnostic tools focus mainly on air handlers, but the opportunity exists for broadening the scope of the tools to include all major parts of heating, cooling, and ventilation systems in more detail. This paper compares several tools in the following areas: (1) Scope, intent, and background; (2) Data acquisition, pre-processing, and management; (3) Problems detected; (4) Raw data visualization; (5) Manual and automated diagnostic methods and (6) Level of automation. This comparison is intended to provide practitioners and researchers with a picture of the current state of diagnostic tools. There is tremendous potential for these tools to help improve commercial building energy and non-energy performance.

  5. SHM Data Sets and Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sets and Software Contact Institute Director Charles Farrar (505) 663-5330 Email UCSD EI Director Michael Todd (858) 534-5951 Professional Staff Assistant Jutta Kayser (505)...

  6. Commercial Software | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a variety of applications including simulation, modeling, computation, internet, flexible framework modeling, and more. Commercial software can be licensed directly from...

  7. Data driven process monitoring based on neural networks and classification trees

    E-Print Network [OSTI]

    Zhou, Yifeng

    2005-11-01T23:59:59.000Z

    of this dissertation is to develop process monitoring schemes that can be applied to complex process systems. Neural networks have been a popular tool for modeling and pattern classification for monitoring of process systems. However, due to the prohibitive...

  8. The Steam System Assessment Tool (SSAT): Estimating Steam System Energy, Cost, and Emission Savings

    E-Print Network [OSTI]

    Wright, A.; Bealing, C.; Eastwood, A.; Tainsh, R.; Hahn, G.; Harrell, G.

    The U. S. Department of Energy's (DOE) Industrial Technology Program BestPractices Steam effort is developing a number of software tools to assist industrial energy users to improve the efficiency of their steam system. A major new Best...

  9. Inconsistency Management in Software Engineering 1 INCONSISTENCY MANAGEMENT IN SOFTWARE

    E-Print Network [OSTI]

    Spanoudakis, George

    ; do not guarantee some properties of the system, such as safety and reliability; and generateInconsistency Management in Software Engineering 1 INCONSISTENCY MANAGEMENT IN SOFTWARE ENGINEERING difficulties on system maintenance. On the positive side, inconsistencies can facilitate identification of some

  10. BEAM EMITTANCE MEASUREMENT TOOL FOR CEBAF OPERATIONS

    SciTech Connect (OSTI)

    Chevtsov, Pavel; Tiefenback, Michael

    2008-10-01T23:59:59.000Z

    A new software tool was created at Jefferson Lab to measure the emittance of the CEBAF electron beams. The tool consists of device control and data analysis applications. The device control application handles the work of wire scanners and writes their measurement results as well as the information about accelerator settings during these measurements into wire scanner data files. The data analysis application reads these files and calculates the beam emittance on the basis of a wire scanner data processing model. Both applications are computer platform independent but are mostly used on LINUX PCs recently installed in the accelerator control room. The new tool significantly simplifies beam emittance measurement procedures for accelerator operations and contributes to a very high availability of the CEBAF machine for the nuclear physics program at Jefferson Lab.

  11. NOx Dispatching in Plant Utility Systems Using Existing Tools

    E-Print Network [OSTI]

    Nath, R.; Kumana, J. D.

    NO x DISPATCHING IN PLANT UTILITY SYSTEMS - USING EXISTING TOOLS Ravi Nath and Jimmy D. Kumana Linnhoff March ABSTRACT Localized NO x reduction during Ozone Alerts is a problem of increasing importance to process industries in and around.... Economic dispatching of plant utility systems is commonly done by the gas and electric power companies and software tools for such dispatching already exist even at the industrial plant level [2]. The purpose of this paper is to show...

  12. KLA-Tencor's Inspection Tool Reduces LED Manufacturing Costs

    Broader source: Energy.gov [DOE]

    With the help of DOE funding, KLA-Tencor is developing an improved inspection tool for LED manufacturing that promises to significantly increase overall process yields and minimize expensive waste. The power of the inspection tool lies in optical detection techniques coupled with defect source analysis software to statistically correlate front-end geometric anomalies in the substrate to killer defects on the back end of the manufacturing line, which give rise to an undesirable or unusable end product.

  13. Software quality is a crucial issue in a society that vitally depends on software systems. Software quality

    E-Print Network [OSTI]

    Deissenboeck, Florian

    ABSTRACT Software quality is a crucial issue in a society that vitally depends on software systems quality in development. If the top management of software dependent companies does not have effective software quality management. After giving a few examples for software quality in real life

  14. Software configuration management plan, 241-AY and 241-AZ tank farm MICON automation system

    SciTech Connect (OSTI)

    Hill, L.F.

    1997-10-30T23:59:59.000Z

    This document establishes a Computer Software Configuration Management Plan (CSCM) for controlling software for the MICON Distributed Control System (DCS) located at the 241-AY and 241-AZ Aging Waste Tank Farm facilities in the 200 East Area. The MICON DCS software controls and monitors the instrumentation and equipment associated with plant systems and processes. A CSCM identifies and defines the configuration items in a system (section 3.1), controls the release and change of these items throughout the system life cycle (section 3.2), records and reports the status of configuration items and change requests (section 3.3), and verifies the completeness and correctness of the items (section 3.4). All software development before initial release, or before software is baselined, is considered developmental. This plan does not apply to developmental software. This plan applies to software that has been baselined and released. The MICON software will monitor and control the related instrumentation and equipment of the 241-AY and 241-AZ Tank Farm ventilation systems. Eventually, this software may also assume the monitoring and control of the tank sludge washing equipment and other systems as they are brought on line. This plan applies to the System Cognizant Manager and MICON Cognizant Engineer (who is also referred to herein as the system administrator) responsible for the software/hardware and administration of the MICON system. This document also applies to any other organizations within Tank Farms which are currently active on the system including system cognizant engineers, nuclear operators, technicians, and control room supervisors.

  15. Tool Support for Continuous Quality Assessment Florian Deissenboeck, Markus Pizka, Tilman Seifert

    E-Print Network [OSTI]

    Tool Support for Continuous Quality Assessment Florian Deissenboeck, Markus Pizka, Tilman Seifert Maintenance costs make up the bulk of the total life cycle costs of a software system. Besides organizational predetermined by var- ious quality attributes of the software system itself, such as redundancy and adequate

  16. Model-Based Tool Integration -State of the Art and Future Perspectives1

    E-Print Network [OSTI]

    Hochreiter, Sepp

    lifecycle. The model-driven software development paradigm as, e.g., propagated by the OMG with its Model grant FIT-IT-810806. Abstract The quality and effectiveness of software development heavily depends on the underlying tools used for different phases of the development lifecycle. With the rise of model

  17. Final Report: Center for Scalable Application Development Software

    SciTech Connect (OSTI)

    Mellor-Crummey, John [Rice University

    2014-10-26T23:59:59.000Z

    The Center for Scalable Application Development Software (CScADS) was established as a part- nership between Rice University, Argonne National Laboratory, University of California Berkeley, University of Tennessee – Knoxville, and University of Wisconsin – Madison. CScADS pursued an integrated set of activities with the aim of increasing the productivity of DOE computational scientists by catalyzing the development of systems software, libraries, compilers, and tools for leadership computing platforms. Principal Center activities were workshops to engage the research community in the challenges of leadership computing, research and development of open-source software, and work with computational scientists to help them develop codes for leadership computing platforms. This final report summarizes CScADS activities at Rice University in these areas.

  18. SNL software manual for the ACS Data Analytics Project.

    SciTech Connect (OSTI)

    Stearley, Jon R.; McLendon, William Clarence, III; Rodrigues, Arun F.; Williams, Aaron S.; Hooper, Russell Warren; Robinson, David Gerald; Stickland, Michael G.

    2011-10-01T23:59:59.000Z

    In the ACS Data Analytics Project (also known as 'YumYum'), a supercomputer is modeled as a graph of components and dependencies, jobs and faults are simulated, and component fault rates are estimated using the graph structure and job pass/fail outcomes. This report documents the successful completion of all SNL deliverables and tasks, describes the software written by SNL for the project, and presents the data it generates. Readers should understand what the software tools are, how they fit together, and how to use them to reproduce the presented data and additional experiments as desired. The SNL YumYum tools provide the novel simulation and inference capabilities desired by ACS. SNL also developed and implemented a new algorithm, which provides faster estimates, at finer component granularity, on arbitrary directed acyclic graphs.

  19. IBM Software IBM Rational Team

    E-Print Network [OSTI]

    IBM Software Data Sheet March 2013 IBM Rational Team Concert Be lean. Be agile. Work together near real-time, contextual collaboration for distributed project teams Improve software quality objectives. Teams are trying to adopt agile practices, but are having difficulty because of several factors

  20. Software measurement 2009. 1. 14

    E-Print Network [OSTI]

    Bae, Doo-Hwan

    Software measurement Tutorial 2009. 1. 14 Yeong-Seok Seo #12; KAIST SE LAB 2009 Contents Introduction Designing a software measurement process Measurement elements Measurement scales Measure for success Conclusion 2/28 #12; KAIST SE LAB 2009 Introduction(1/3) Definition of terminology Measurement[1

  1. Arquitecturas Software Juan Jos Moreno Navarro

    E-Print Network [OSTI]

    Fredlund, Lars-Ã?ke

    Arquitecturas Software Juan José Moreno Navarro (Curso de Software basado en Componentes, junto a Lars-Ake Fredlund) Arquitecturas Software · Motivación: ­ Complejidad creciente de aplicaciones sus propiedades globales. Arquitecturas Software · Características: ­ Parte del diseño de software

  2. The Software Engineering Master's Program 1. Introduction

    E-Print Network [OSTI]

    of Embedded Real-time Systems; ___SW4581 Software Reliability (3-1); ___SW4582 Weapons System Software SafetyThe Software Engineering Master's Program 1. Introduction The Software Engineering program at the U to learn all aspects of software development and the skills needed to efficiently and reliably plan

  3. RELAP-7 SOFTWARE VERIFICATION AND VALIDATION PLAN

    SciTech Connect (OSTI)

    Smith, Curtis L [Idaho National Laboratory; Choi, Yong-Joon [Idaho National Laboratory; Zou, Ling [Idaho National Laboratory

    2014-09-01T23:59:59.000Z

    This INL plan comprehensively describes the software for RELAP-7 and documents the software, interface, and software design requirements for the application. The plan also describes the testing-based software verification and validation (SV&V) process—a set of specially designed software models used to test RELAP-7.

  4. 157156 Master of Science in Informatics, Major in Software Design * Slight changes in the study programme may occur.

    E-Print Network [OSTI]

    Krause, Rolf

    edge development tools and methodologies to obtain a profound knowledge about soft- ware engineering of complex systems. This qualifies graduates to work as software designers, soft- ware architects programme may occur. Study Programme * Sem.1Sem.2 Basic Courses (30 ECTS) Intelligent Systems 6 Software

  5. 259NUCLEAR ENGINEERING AND TECHNOLOGY, VOL.38 NO.3 APRIL 2006 NuSEE: AN INTEGRATED ENVIRONMENT OF SOFTWARE

    E-Print Network [OSTI]

    . In safety-critical systems such as a Nuclear Power Plant (NPP), extremely high- confidence for software and analysis have become increasingly important in nuclear power plant (NPP) safety-critical systems. KEYWORDS : V&V, Software Specification, Safety-Critical System, Tool #12;260 NUCLEAR ENGINEERING

  6. Issues in Using Students in Empirical Studies in Software Engineering Education Jeffrey Carver Letizia Jaccheri Sandro Morasca

    E-Print Network [OSTI]

    Carver, Jeffrey C.

    . Researchers often use these studies to pilot experiments before they are carried out in industrial Studies, Pilot Studies, Software Engineering Education 1. Introduction Evidence-driven management. Although reliable evidence is sorely needed on proc- esses, methods, techniques, and tools, few software or

  7. An Effective EMS Hardware and Software Interface- The Trained Operator

    E-Print Network [OSTI]

    Cherry, C. L.

    AN EFFECTIVE EMS HARDWARE AND SOFTWARE THE TRAINED OPER~TQR Christene ~. Cherry Johnson Controls Institute INTERFACE Milwaukee, ABSTRAC'l' A computerized Energy Management Sys tem (EMS) is a tool that allows the user to moni tor... the importance of proper system design, installation and program application. The importance of having a trained EMS operator is less recognized. The purpose of this paper is to focus on structured training programs and how they can improve the EMS...

  8. OOTW COST TOOLS

    SciTech Connect (OSTI)

    HARTLEY, D.S.III; PACKARD, S.L.

    1998-09-01T23:59:59.000Z

    This document reports the results of a study of cost tools to support the analysis of Operations Other Than War (OOTW). It recommends the continued development of the Department of Defense (DoD) Contingency Operational Support Tool (COST) as the basic cost analysis tool for 00TWS. It also recommends modifications to be included in future versions of COST and the development of an 00TW mission planning tool to supply valid input for costing.

  9. Adjustable cutting tool holder

    SciTech Connect (OSTI)

    Steinhour, William Lee III; West, Drew; Honeycutt, Steve; Frank, Steven; Krishnamurthy, Kallutla

    2000-09-21T23:59:59.000Z

    This patent application describes a device for varying the geometry of a cutting tool for use in machining operations.

  10. Recent improvements to software used for optimization of SRF linacs

    SciTech Connect (OSTI)

    Powers, Tom J. [JLAB

    2014-12-01T23:59:59.000Z

    This work describes a software tool that allows one to vary parameters and understand the effects on the optimized costs of construction plus 10 year operations of an SRF linac, where operation costs includes the cost of the electrical utilities but not the labor or other costs. The program includes estimates for the associated cryogenic facility, and controls hardware. The software interface provides the ability to vary the cost of the different aspects of the machine as well as to change the cryomodule and cavity types. Additionally, this work will describe the recent improvements to the software that allow one to estimate the costs of energy-recovery based linacs and to enter arbitrary values of the low field Q0 and Q0 slope. The initial goal when developing the software was to convert a spreadsheet format to a graphical interface and to allow the ability to sweep different parameter sets. The tools also allow one to compare the cost of the different facets of the machine design and operations so as to better understand tradeoffs. An example of how it was used to independently investigate cost optimization tradeoffs for the LCLS-II linac will also be presented.

  11. Agile Software Architecture: Why Your Project Needs It

    E-Print Network [OSTI]

    de Weck, Olivier L.

    2/12/2011 1 Agile Software Architecture: Why Your Project Needs It Business meets Implementation Chris Miyachi SDM Entering Class 2000 Presentation Outline · What is Software Architecture · Architecture within the Software Lifecycle · Software Architecture and Lean Software Development · Software

  12. Suncatcher monitoring project

    SciTech Connect (OSTI)

    Maeda, B.

    1980-01-01T23:59:59.000Z

    An intensive microcomputer-based energy monitoring project was conducted on a passively heated and cooled residence in Davis, California. The building performance was estimated in the design phase by both a simplified method and an hourly simulation. In the monitoring phase, more than 75 sensors, located in the building elements, interior spaces, appliances, and the ambient environment provide data about temperatures, energy use and radiation. These data are used to determine the actual solar system contributions, and to validate and improve design calculation tools. Information was gathered on the Suncatcher system for almost three years. Daily min/max temperatures inside and outside of the house and utility use have been reduced and analyzed. From these data we calculate the monthly net heating load and the percentage of that met by solar energy. To date, it has averaged 71%. Hourly data, gathered by the custom-made data acquisition system, show how daily temperature and radiation patterns change. Natural cooling supplied 100% of the cooling need. During the hot summers typical of the Davis area, the house has remained very comfortable virtually all of the time, except for two or three afternoons each summer, where temperatures reached a stuffy 83 or 84F. The other solar energy source, the solar hot water system, has provided 50 to 60% of the hot water needed by the residents, who use less domestic hot water than average.

  13. LogTool: A Flexible, Publicly Available Data Analysis Tool Providing Graphical Analysis, Extraction of Data Subsets and Daytyping for Multiple Data Formats

    E-Print Network [OSTI]

    Qualmann, R. L.; Goudge, P.; Baker, M.

    2007-01-01T23:59:59.000Z

    data collected for use in the AIRMaster+ compressed air simulation software. LogTool v1 was an application comprising Excel VBA modules and Visual Basic 6.0 modules. It stored logger data in hidden Excel worksheets. LogTool v2 is written... and flexible process as described below. Getting Started When LogTool is initiated, a ?splash? screen will appear providing the version and a brief description of the software. Click ?Continue? to open a blank main screen as shown in Figure 1. The ?Help...

  14. The Software Technology of the 21st Century: From Software Reuse to Collaborative Software Design

    E-Print Network [OSTI]

    Fischer, Gerhard

    Gerhard Fischer University of Colorado, Center for LifeLong Learning and Design (L3D) Department supports evolution [Dawkins, 1987]. Various types of software artifacts, such as design knowledge a cognitive and social problem [Fischer, 1987]. Designers must locate reusable software artifacts relevant

  15. Discovering unexpected information using a building energy visualization tool.

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    platform to manage buildings energy. Smart buildings are already managed by BMS (Building Management SystemDiscovering unexpected information using a building energy visualization tool. Lange B.a, Rodriguez insight about buildings energy consumption. We will focus on the usage of this software to extract

  16. Ice-Floe Simulation Viewer Tool Justin Adams

    E-Print Network [OSTI]

    Peters, Dennis

    Ice-Floe Simulation Viewer Tool Justin Adams Computer Engineering Memorial University St. John's, Newfoundland dpeters@mun.ca Abstract--We are developing software to simulate the be- haviour of sea ice the ability to set up the initial conditions, run the simulation, and display the simulated ice- floe data

  17. SELECTED LECTURES ON GENEALOGY AN INTRODUCTION TO SCIENTIFIC TOOLS

    E-Print Network [OSTI]

    Dershowitz, Nachum

    #12;#12;#12;SELECTED LECTURES ON GENEALOGY AN INTRODUCTION TO SCIENTIFIC TOOLS Edited by H. Daniel Genealogy 39 Stephen L. Egbert and Karen G.R. Roekard DNA to genetic genealogy 57 Stephen P. Morse A Practical Introduction to Dataset Merging 83 Kamila Klauzinska Merging in Genealogy Software and Genealogy

  18. Version Sensitive Editing: Change History as a Programming Tool

    E-Print Network [OSTI]

    Atkins, David

    , Naperville, IL 60566, USA, datkins@bell-labs.com http://www.bell-labs.com/~datkins Abstract. Software Version extracts two versions of the file from the VCS as plain text files, and then uses a tool such as Unix diff

  19. Monitoring EGS Stimulation and Reservoir Dynamics with InSAR...

    Broader source: Energy.gov (indexed) [DOE]

    Monitoring EGS Stimulation and Reservoir Dynamics with InSAR and MEQ, DE-EE0005510 PI: Nicholas C. Davatzes Temple University Topic 4: Observation Tools and Data Collection System...

  20. Technology and application of structural health monitoring in bridges

    E-Print Network [OSTI]

    Meehan, Rachael E. (Rachael Elizabeth)

    2011-01-01T23:59:59.000Z

    Structural Health Monitoring (SHM) has become a useful tool for detecting when the characteristics of a structure have changed to indicate damage such that well-timed and effective maintenance may be planned and the remaining ...

  1. Tool Support for Inspecting the Code Quality of HPC Applications

    SciTech Connect (OSTI)

    Panas, T; Quinlan, D; Vuduc, R

    2007-03-16T23:59:59.000Z

    The nature of HPC application development encourages ad hoc design and implementation, rather than formal requirements analysis and design specification as is typical in software engineering. However, we cannot simply expect HPC developers to adopt formal software engineering processes wholesale, even while there is a need to improve software structure and quality to ensure future maintainability. Therefore, we propose tools that HPC developers can use at their discretion to obtain feedback on the structure and quality of their codes. This feedback would come in the form of code quality metrics and analyses, presented when necessary in intuitive and interactive visualizations. This paper summarizes our implementation of just such a tool, which we apply to a standard HPC benchmark as ''proof-of-concept.''

  2. Development of Updated ABsorption SIMulation Software (ABSIM)

    SciTech Connect (OSTI)

    Yang, Zhiyao [Purdue University, West Lafayette, IN; Tang, Xin [Purdue University, West Lafayette, IN; Qu, Ming [Purdue University, West Lafayette, IN; Abdelaziz, Omar [ORNL; Gluesenkamp, Kyle R [ORNL

    2014-01-01T23:59:59.000Z

    ABsorption SIMulation, ABSIM, was developed for the simulation of absorption systems by The Oak Ridge National Laboratory during 1980s and 1990s. ABSIM provides a platform for users to investigate various cycle configurations and working fluids, to calculate their operating parameters, to predict their performance, and to compare them with each other on a uniform basis. ABSIM is indeed a very useful and accurate tool for researchers to investigate various absorption systems. However, it has not been well maintained: it is incompatible with recent operating systems; the interface needs improved user-friendliness, and the system needs better parameter setting and debugging tools to help achieve convergence. Therefore, it is highly needed to update and improve ABSIM. The paper presents recent efforts to improve ABSIM s compatibility with current operating systems, user interface, and analysis capabilities. The paper details the features and functions of the newly updated ABSIM software. The new ABSIM still uses the previously validated calculation engine of the old ABSIM. The new graphic user interfaces (GUI) were developed in Qt, which is an open source license GUI software based on C++. XML was used as the database for data storage in the new ABSIM. The new ABSIM has been designed to be easily learned and used. It has enhanced editing and construction functions, plus enhanced analysis features including parametric tables, plotting, property plots, and master panels for debugging. A single effect water/LiBr absorption system is used as a case study in this paper to illustrate the features, capabilities, and functions of the new ABSIM. This case study was actually an example system available in the old ABSIM. The new version of ABSIM will be continuously developed to include additional subroutines for the components in liquid desiccant systems. The new ABSIM will be available to public for free. The ultimate goal of the new ABSIM is to allow it to become a simulation platform for both absorption heat pump and liquid desiccant systems.

  3. CTRLWORK AND MACBREAKZ ERGONOMIC BREAK REMINDER SOFTWARE

    E-Print Network [OSTI]

    California at Santa Barbara, University of

    CTRLWORK AND MACBREAKZ ERGONOMIC BREAK REMINDER SOFTWARE SOFTWARE FEATURES: Analyzes your for installation assistance. 1. Please uninstall the former ergonomic break software, RSIGuard, if currently instructions on the screen. For more information, contact the UCSB Ergonomics Program at Ergonomics

  4. Managing Variability throughout the Software Development Lifecycle

    E-Print Network [OSTI]

    Managing Variability throughout the Software Development Lifecycle Neil Loughran and Awais Rashid levels of the software development lifecycle, especially when new requirements arise. We believe of the software development lifecycle. Moreover, the effects of variability and, in particular, new variabilities

  5. Daylighting Prediction Software: Comparative Analysis and Application

    E-Print Network [OSTI]

    Estes, J. M. Jr.; Schreppler, S.; Newsom, T.

    2004-01-01T23:59:59.000Z

    in selecting a software program are presented. “Radiance”, a reverse ray tracing method software package, was chosen for use in the simulations. An existing school was modeled with the Radiance software and predictions of daylighting contributions were compared...

  6. Software Security Rules, SDLC Perspective

    E-Print Network [OSTI]

    Banerjee, C

    2009-01-01T23:59:59.000Z

    Software has become an integral part of everyday life. Everyday, millions of people perform transaction through internet, ATM, mobile phone, they send email and Egreetings, and use word processing and spreadsheet for various purpose. People use software bearing in mind that it is reliable and can be trust upon and the operation they perform is secured. Now, if these software have exploitable security hole then how can they be safe for use. Security brings value to software in terms of peoples trust. The value provided by secure software is of vital importance because many critical functions are entirely dependent on the software. That is why security is a serious topic which should be given proper attention during the entire SDLC, right from the beginning. For the proper implementation of security in the software, twenty one security rules are proposed in this paper along with validation results. It is found that by applying these rules as per given implementation mechanism, most of the vulnerabilities are el...

  7. Software-Based Challenges of Developing the Future Distribution Grid

    SciTech Connect (OSTI)

    Stewart, Emma; Kiliccote, Sila; McParland, Charles

    2014-06-01T23:59:59.000Z

    The software that the utility industry currently uses may be insufficient to analyze the distribution grid as it rapidly modernizes to include active resources such as distributed generation, switch and voltage control, automation, and increasingly complex loads. Although planners and operators have traditionally viewed the distribution grid as a passive load, utilities and consultants increasingly need enhanced analysis that incorporates active distribution grid loads in order to ensure grid reliability. Numerous commercial and open-source tools are available for analyzing distribution grid systems. These tools vary in complexity from providing basic load-flow and capacity analysis under steady-state conditions to time-series analysis and even geographical representations of dynamic and transient events. The need for each type of analysis is not well understood in the industry, nor are the reasons that distribution analysis requires different techniques and tools both from those now available and from those used for transmission analysis. In addition, there is limited understanding of basic capability of the tools and how they should be practically applied to the evolving distribution system. The study reviews the features and state of the art capability of current tools, including usability and visualization, basic analysis functionality, advanced analysis including inverters, and renewable generation and load modeling. We also discuss the need for each type of distribution grid system analysis. In addition to reviewing basic functionality current models, we discuss dynamics and transient simulation in detail and draw conclusions about existing software?s ability to address the needs of the future distribution grid as well as the barriers to modernization of the distribution grid that are posed by the current state of software and model development. Among our conclusions are that accuracy, data transfer, and data processing abilities are key to future distribution grid modeling, and measured data sources are a key missing element . Modeling tools need to be calibrated based on measured grid data to validate their output in varied conditions such as high renewables penetration and rapidly changing topology. In addition, establishing a standardized data modeling format would enable users to transfer data among tools to take advantage of different analysis features. ?

  8. Overview of Hazard Assessment and Emergency Planning Software of Use to RN First Responders

    SciTech Connect (OSTI)

    Waller, E; Millage, K; Blakely, W F; Ross, J A; Mercier, J R; Sandgren, D J; Levine, I H; Dickerson, W E; Nemhauser, J B; Nasstrom, J S; Sugiyama, G; Homann, S; Buddemeier, B R; Curling, C A; Disraelly, D S

    2008-08-26T23:59:59.000Z

    There are numerous software tools available for field deployment, reach-back, training and planning use in the event of a radiological or nuclear (RN) terrorist event. Specialized software tools used by CBRNe responders can increase information available and the speed and accuracy of the response, thereby ensuring that radiation doses to responders, receivers, and the general public are kept as low as reasonably achievable. Software designed to provide health care providers with assistance in selecting appropriate countermeasures or therapeutic interventions in a timely fashion can improve the potential for positive patient outcome. This paper reviews various software applications of relevance to radiological and nuclear (RN) events that are currently in use by first responders, emergency planners, medical receivers, and criminal investigators.

  9. On Assessing the Robustness of Structural Health Monitoring Technologies

    SciTech Connect (OSTI)

    Stull, Christopher J. [Los Alamos National Laboratory; Hemez, Francois M. [Los Alamos National Laboratory; Farrar, Charles R. [Los Alamos National Laboratory

    2012-08-24T23:59:59.000Z

    As Structural Health Monitoring (SHM) continues to gain popularity, both as an area of research and as a tool for use in industrial applications, the number of technologies associated with SHM will also continue to grow. As a result, the engineer tasked with developing a SHM system is faced with myriad hardware and software technologies from which to choose, often adopting an ad hoc qualitative approach based on physical intuition or past experience to making such decisions. This paper offers a framework that aims to provide the engineer with a quantitative approach for choosing from among a suite of candidate SHM technologies. The framework is outlined for the general case, where a supervised learning approach to SHM is adopted, and the presentation will focus on applying the framework to two commonly encountered problems: (1) selection of damage-sensitive features and (2) selection of a damage classifier. The data employed for these problems will be drawn from a study that examined the feasibility of applying SHM to the RAPid Telescopes for Optical Response observatory network.

  10. Progress in Addressing DNFSB Recommendation 2002-1 Issues: Improving Accident Analysis Software Applications

    SciTech Connect (OSTI)

    VINCENT, ANDREW

    2005-04-25T23:59:59.000Z

    Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 2002-1 (''Quality Assurance for Safety-Related Software'') identified a number of quality assurance issues on the use of software in Department of Energy (DOE) facilities for analyzing hazards, and designing and operating controls to prevent or mitigate potential accidents. Over the last year, DOE has begun several processes and programs as part of the Implementation Plan commitments, and in particular, has made significant progress in addressing several sets of issues particularly important in the application of software for performing hazard and accident analysis. The work discussed here demonstrates that through these actions, Software Quality Assurance (SQA) guidance and software tools are available that can be used to improve resulting safety analysis. Specifically, five of the primary actions corresponding to the commitments made in the Implementation Plan to Recommendation 2002-1 are identified and discussed in this paper. Included are the web-based DOE SQA Knowledge Portal and the Central Registry, guidance and gap analysis reports, electronic bulletin board and discussion forum, and a DOE safety software guide. These SQA products can benefit DOE safety contractors in the development of hazard and accident analysis by precluding inappropriate software applications and utilizing best practices when incorporating software results to safety basis documentation. The improvement actions discussed here mark a beginning to establishing stronger, standard-compliant programs, practices, and processes in SQA among safety software users, managers, and reviewers throughout the DOE Complex. Additional effort is needed, however, particularly in: (1) processes to add new software applications to the DOE Safety Software Toolbox; (2) improving the effectiveness of software issue communication; and (3) promoting a safety software quality assurance culture.

  11. Online Analysis of Wind and Solar Part II: Transmission Tool

    SciTech Connect (OSTI)

    Makarov, Yuri V.; Etingov, Pavel V.; Ma, Jian; Subbarao, Krishnappa

    2012-01-31T23:59:59.000Z

    To facilitate wider penetration of renewable resources without compromising system reliability concerns arising from the lack of predictability of intermittent renewable resources, a tool for use by California Independent System Operator (CAISO) power grid operators was developed by Pacific Northwest National Laboratory (PNNL) in conjunction with CAISO with funding from California Energy Commission. The tool analyzes and displays the impacts of uncertainties in forecasts of loads and renewable generation on: (1) congestion, (2)voltage and transient stability margins, and (3)voltage reductions and reactive power margins. The impacts are analyzed in the base case and under user-specified contingencies.A prototype of the tool has been developed and implemented in software.

  12. System for remote multichannel real-time monitoring of mouse ECG via the Internet

    E-Print Network [OSTI]

    Oefinger, Matthew Blake, 1976-

    2003-01-01T23:59:59.000Z

    A hardware/software system was developed to allow real-time monitoring of multiple physiological signals simultaneously via the Internet. The hardware is specifically designed for measuring ECG signals from mice, while the ...

  13. SAPHIRE 8 Software Acceptance Test Plan

    SciTech Connect (OSTI)

    Ted S. Wood; Curtis L. Smith

    2009-07-01T23:59:59.000Z

    This document describe & report the overall SAPHIRE 8 Software acceptance test paln to offically release the SAPHIRE version 8 software to the NRC custoer for distribution.

  14. Wachs Cutter Tooling Station (4495)

    Broader source: Energy.gov (indexed) [DOE]

    purchase, build and install Wachs cutter tooling. The Wachs Cutter Tooling Station is similar to previously operated facility tooling and will utilize an existing hydraulic unit....

  15. Nuclear Explosion Monitoring Research and Engineering Program - Strategic Plan

    SciTech Connect (OSTI)

    Casey, Leslie A. [DOE/NNSA

    2004-09-01T23:59:59.000Z

    The Department of Energy (DOE)/National Nuclear Security Administration (NNSA) Nuclear Explosion Monitoring Research and Engineering (NEM R&E) Program is dedicated to providing knowledge, technical expertise, and products to US agencies responsible for monitoring nuclear explosions in all environments and is successful in turning scientific breakthroughs into tools for use by operational monitoring agencies. To effectively address the rapidly evolving state of affairs, the NNSA NEM R&E program is structured around three program elements described within this strategic plan: Integration of New Monitoring Assets, Advanced Event Characterization, and Next-Generation Monitoring Systems. How the Program fits into the National effort and historical accomplishments are also addressed.

  16. High Temperature ESP Monitoring

    Broader source: Energy.gov (indexed) [DOE]

    Integration Center, Rosharon, Texas - Fibre Optic development * Schlumberger Fibre Optics Technology Center, Southampton, UK - Surface acquisition hardware and software *...

  17. Software Modeling and Verification Professors

    E-Print Network [OSTI]

    Ábrahám, Erika

    Software Modeling and Verification Staff · Professors Prof. Dr. Ir. Joost-Pieter Katoen Prof. em) Mark Timmer (Uni Twente, NL) Dr. Olga Tveretina (Karlsruhe University, D) Ralf Wimmer (Universität

  18. Software Engineering Introduction to SWE

    E-Print Network [OSTI]

    Razak, Saquib

    Unit 23 1 Software Engineering · Introduction to SWE · What is SDLC · Phases of SDLC #12;Unit 23 2 the new house to the customer which is now ready for occupation. #12;Unit 23 4 What is SDLC The SDLC has

  19. Ten Incredibly Dangerous Software Ideas

    E-Print Network [OSTI]

    G. A. Maney

    2006-07-07T23:59:59.000Z

    This is a rough draft synopsis of a book presently in preparation. This book provides a systematic critique of the software industry. This critique is accomplished using classical methods in practical design science.

  20. A plasma process monitor/control system

    SciTech Connect (OSTI)

    Stevenson, J.O.; Ward, P.P.; Smith, M.L. [Sandia National Labs., Albuquerque, NM (United States); Markle, R.J. [Advanced Micro Devices, Inc., Austin, TX (United States)

    1997-08-01T23:59:59.000Z

    Sandia National Laboratories has developed a system to monitor plasma processes for control of industrial applications. The system is designed to act as a fully automated, sand-alone process monitor during printed wiring board and semiconductor production runs. The monitor routinely performs data collection, analysis, process identification, and error detection/correction without the need for human intervention. The monitor can also be used in research mode to allow process engineers to gather additional information about plasma processes. The plasma monitor can perform real-time control of support systems known to influence plasma behavior. The monitor can also signal personnel to modify plasma parameters when the system is operating outside of desired specifications and requires human assistance. A notification protocol can be selected for conditions detected in the plasma process. The Plasma Process Monitor/Control System consists of a computer running software developed by Sandia National Laboratories, a commercially available spectrophotometer equipped with a charge-coupled device camera, an input/output device, and a fiber optic cable.

  1. June 15-16, 2001 SPLST 2001 -Szeged, Hungary 1 Columbus -Tool for Reverse Engineering

    E-Print Network [OSTI]

    Ferenc, Rudolf

    June 15-16, 2001 SPLST 2001 - Szeged, Hungary 1 Columbus - Tool for Reverse Engineering Large;June 15-16, 2001 SPLST 2001 - Szeged, Hungary 2 Introduction · Software systems are rapidly growing" [Chikofsky et al.] #12;June 15-16, 2001 SPLST 2001 - Szeged, Hungary 3 Assessment of RE tools · Analysis

  2. Evaluating the FITTEST Automated Testing Tools in SOFTEAM: an Industrial Case Study

    E-Print Network [OSTI]

    Utrecht, Universiteit

    Evaluating the FITTEST Automated Testing Tools in SOFTEAM: an Industrial Case Study Etienne Brosse shown the ability to automate testing within a real industry case. I. INTRODUCTION Software testing.089 3508 TB Utrecht The Netherlands #12;Evaluating the FITTEST Automated Testing Tools in SOFTEAM

  3. Grid Portal Interface for Interactive Use and Monitoring of High-Throughput Proteome

    E-Print Network [OSTI]

    Bourne, Philip E.

    Grid Portal Interface for Interactive Use and Monitoring of High-Throughput Proteome Annotation software on a high performance computing platform such as the grid. The Encyclopedia of Life (EOL) project application to drive grid software development. It is a flagship application for the TeraGrid project [3

  4. Certification Status Search Tool

    E-Print Network [OSTI]

    Certification Status Search Tool (SB/DVBE) Illustrated User Manual #12;2 Certification Status Search Tool (SB/DVBE) Rev. 5/14/09 Copyright © 2008 RFP Depot, LLC dba BidSync All Rights Reserved://www.bidsync.com #12;3 Certification Status Search Tool (SB/DVBE) Rev. 5/14/09 Introduction BidSync is a powerful e

  5. Monitoring Erebus volcano's active lava lake; tools, techniques and observations

    E-Print Network [OSTI]

    Peters, Nial John

    2015-03-03T23:59:59.000Z

    are those that persistently expose magma at the Earth’s surface. In this respect, they encompass many of the popular stereo- types of volcanic activity, exhibiting sustained passive degassing, which is often ac- companied sporadically by varying degrees... serves the crater rim was replaced. The old system was approaching ten years of service, and had become overly com- plex, and unreliable. A combination of extreme winds and corrosive gases makes the crater rim of Erebus an unsuitable site for solar panels...

  6. Field Quality Analysis as a Tool to Monitor Magnet Production

    E-Print Network [OSTI]

    Gupta, R.

    2011-01-01T23:59:59.000Z

    Press Case I Age Difference between Upper and Lower Coils (Days) Figure 4: A correlation plot with a least square fit

  7. Wireline logging tool catalog

    SciTech Connect (OSTI)

    Verdier, M.

    1986-01-01T23:59:59.000Z

    This book provides discussions on wireline logging tools. The contents are resistivity, radioactivity, acoustic, formation dip and borehold geometry, formation sampling, and auxiliary services.

  8. Dual-use tools and systematics-aware analysis workflows in the ATLAS Run-II analysis model

    E-Print Network [OSTI]

    FARRELL, Steven; The ATLAS collaboration

    2015-01-01T23:59:59.000Z

    The ATLAS analysis model has been overhauled for the upcoming run of data collection in 2015 at 13 TeV. One key component of this upgrade was the Event Data Model (EDM), which now allows for greater flexibility in the choice of analysis software framework and provides powerful new features that can be exploited by analysis software tools. A second key component of the upgrade is the introduction of a dual-use tool technology, which provides abstract interfaces for analysis software tools to run in either the Athena framework or a ROOT-based framework. The tool interfaces, including a new interface for handling systematic uncertainties, have been standardized for the development of improved analysis workflows and consolidation of high-level analysis tools. This presentation will cover the details of the dual-use tool functionality, the systematics interface, and how these features fit into a centrally supported analysis environment.

  9. The run control and monitoring system of the CMS experiment

    SciTech Connect (OSTI)

    Bauer, Gerry; /MIT; Boyer, Vincent; /CERN; Branson, James; /UCLA; Brett, Angela; Cano, Eric; Carboni, Andrea; Ciganek, Marek; Cittolin, Sergio; /CERN; O'Dell, Vivian; /Fermilab; Erhan, Samim; /CERN /UC, San Diego; Gigi, Dominique; /CERN /Kyungpook Natl. U. /MIT /UCLA /CERN /INFN, Legnaro

    2007-10-01T23:59:59.000Z

    The CMS experiment at the LHC at CERN will start taking data in 2008. To configure, control and monitor the experiment during data-taking the Run Control and Monitoring System (RCMS) was developed. This paper describes the architecture and the technology used to implement the RCMS, as well as the deployment and commissioning strategy of this important component of the online software for the CMS experiment.

  10. Control and monitoring of on-line trigger algorithms using a SCADA system

    E-Print Network [OSTI]

    van Herwijnen, E; Barczyk, A; Damodaran, B; Frank, M; Gaidioz, B; Gaspar, C; Jacobsson, R; Jost, B; Neufeld, N; Bonifazi, F; Callot, O; Lopes, H

    2006-01-01T23:59:59.000Z

    LHCb [1] has an integrated Experiment Control System (ECS) [2], based on the commercial SCADA system PVSS [3]. The novelty of this approach is that, in addition to the usual control and monitoring of experimental equipment, it provides control and monitoring for software processes, namely the on-line trigger algorithms. Algorithms based on Gaudi [4] (the LHCb software framework) compute the trigger decisions on an event filter farm of around 2000 PCs. Gaucho [5], the GAUdi Component Helping Online, was developed to allow the control and monitoring of Gaudi algorithms. Using Gaucho, algorithms can be monitored from the run control system provided by the ECS. To achieve this, Gaucho implements a hierarchical control system using Finite State Machines. In this article we describe the Gaucho architecture, the experience of monitoring a large number of software processes and some requirements for future extensions.

  11. Using XFRACAS as a PVROM database tool.

    SciTech Connect (OSTI)

    Hamman, Colin Joseph

    2014-04-01T23:59:59.000Z

    ReliaSofts XFRACAS is a tool chosen by Sandia National Laboratories (SNL) for the purpose of collecting and organizing photovoltaic (PV) system field data that is to be used in assessing PV system reliability. It is a Web-based, closed-loop, incident (failure) reporting, analysis, and corrective action system software package designed for the acquisition, management and analysis of quality and reliability data from multiple sources. The ability to export PV system times-to-failure and times-to-suspension for ready analysis by ReliaSofts Weibull++ and RGA was a primary consideration in choosing XFRACAS as a reliability data collection tool.

  12. A Survey on Mining Software Survey Presentation

    E-Print Network [OSTI]

    Bae, Doo-Hwan

    ­ Effort Estimation ­ Mining Aspects · Papers at a glance · Related Workshop · Available Resources of mining software archives to support, ­ the maintenance of software systems, ­ improve software designA Survey on Mining Software Archives Survey Presentation Jin Ung, Oh ­ 2007.07.11 #12;Contents

  13. The ACTS Center for Software Sustainability

    E-Print Network [OSTI]

    Leroy, Drummond-Lewis

    2014-01-01T23:59:59.000Z

    Software Engineering for High Performance Computing Systemwith DOE high performance computing centers like NERSC, and

  14. What is Your Software Worth? Gio Wiederhold

    E-Print Network [OSTI]

    Wiederhold, Gio

    [Boehm:81, 00]. Even software engineering management approaches termed `Earned Value Management' only This article presents a method for valuing software, based on the income that use of that software is expected expectations, software maintenance, product growth, discounting to present value, and the like, always focusing

  15. Light Duty Utility Arm Software Test Plan

    SciTech Connect (OSTI)

    Kiebel, G.R.

    1995-12-18T23:59:59.000Z

    This plan describes how validation testing of the software will be implemented for the integrated control and data acquisition system of the Light Duty Utility Arm System (LDUA). The purpose of LDUA software validation testing is to demonstrate and document that the LDUA software meets its software requirements specification.

  16. Policy-Parametric Software Travis Breaux

    E-Print Network [OSTI]

    Young, R. Michael

    Policy-Parametric Software Travis Breaux Department of Computer Science North Carolina State University tdbreaux@ncsu.edu Abstract Policy-parametric software describes a vision for enterprise software that promotes organizational policy as a computational parameter in future software systems. In the following

  17. Bachelor-Fachprojekt ,,Software im Automobil"

    E-Print Network [OSTI]

    Morik, Katharina

    11 Bachelor-Fachprojekt ,,Software im Automobil" Olaf Spinczyk Arbeitsgruppe Eingebettete.cs.uni-dortmund.de/~spinczyk/ #12;Fachprojekt ,,Software im Automobil" 22 Inhalt Fachprojekte Thema ,,Software im Automobil" Durchführung Generalisierung #12;Fachprojekt ,,Software im Automobil" 33 Fachprojekte ... ... haben stärkeren

  18. User systems guidelines for software projects

    SciTech Connect (OSTI)

    Abrahamson, L. (ed.)

    1986-04-01T23:59:59.000Z

    This manual presents guidelines for software standards which were developed so that software project-development teams and management involved in approving the software could have a generalized view of all phases in the software production procedure and the steps involved in completing each phase. Guidelines are presented for six phases of software development: project definition, building a user interface, designing software, writing code, testing code, and preparing software documentation. The discussions for each phase include examples illustrating the recommended guidelines. 45 refs. (DWL)

  19. Software interoperability for energy simulation

    E-Print Network [OSTI]

    Hitchcock, Robert J.

    2002-01-01T23:59:59.000Z

    Tools,” in Building Energy Simulation User News, Vol. 22,Interoperability for Energy Simulation Robert J. Hitchcock,Interoperability for Energy Simulation Robert J. Hitchcock,

  20. DESCRIPTION OF THE SOFTWARE AND INTEGRATING PLATFORM

    SciTech Connect (OSTI)

    Flach, G.

    2009-12-31T23:59:59.000Z

    The Cementitious Barriers Partnership (CBP) Project is a multi-disciplinary, multi-institutional collaboration supported by the United States Department of Energy (US DOE) Office of Waste Processing. The objective of the CBP project is to develop a set of tools to improve understanding and prediction of the long-term structural, hydraulic, and chemical performance of cementitious barriers used in nuclear applications. A multi-disciplinary partnership of federal, academic, private sector, and international expertise has been formed to accomplish the project objective. In addition to the US DOE, the CBP partners are the Savannah River National Laboratory (SRNL), Vanderbilt University (VU)/Consortium for Risk Evaluation with Stakeholder Participation (CRESP), Energy Research Center of the Netherlands (ECN), and SIMCO Technologies, Inc. The Nuclear Regulatory Commission (NRC) is providing support under a Memorandum of Understanding. The National Institute of Standards and Technology (NIST) is providing research under an Interagency Agreement. Neither the NRC nor NIST are signatories to the CRADA. The periods of cementitious performance being evaluated are >100 years for operating facilities and > 1000 years for waste management. The set of simulation tools and data developed under this project will be used to evaluate and predict the behavior of cementitious barriers used in near surface engineered waste disposal systems, e.g., waste forms, containment structures, entombments, and environmental remediation, including decontamination and decommissioning analysis of structural concrete components of nuclear facilities (spent-fuel pools, dry spent-fuel storage units, and recycling facilities such as fuel fabrication, separations processes). Simulation parameters will be obtained from prior literature and will be experimentally measured under this project, as necessary, to demonstrate application of the simulation tools for three prototype applications (waste form in concrete vault, high-level waste tank grouting, and spent-fuel pool). Test methods and data needs to support use of the simulation tools for future applications will be defined. The CBP project is a five-year effort focused on reducing the uncertainties of current methodologies for assessing cementitious barrier performance and increasing the consistency and transparency of the assessment process. The results of this project will enable improved risk-informed, performance-based decision-making and support several of the strategic initiatives in the DOE Office of Environmental Management Engineering & Technology Roadmap. Those strategic initiatives include (1) enhanced tank closure processes; (2) enhanced stabilization technologies; (3) advanced predictive capabilities; (4) enhanced remediation methods; (5) adapted technologies for site-specific and complex-wide D&D applications; (6) improved SNF storage, stabilization and disposal preparation; (7) enhanced storage, monitoring and stabilization systems; and (8) enhanced long-term performance evaluation and monitoring.

  1. Fluid sampling tool

    DOE Patents [OSTI]

    Johnston, Roger G. (Los Alamos, NM); Garcia, Anthony R. E. (Espanola, NM); Martinez, Ronald K. (Santa Cruz, NM)

    2001-09-25T23:59:59.000Z

    The invention includes a rotatable tool for collecting fluid through the wall of a container. The tool includes a fluid collection section with a cylindrical shank having an end portion for drilling a hole in the container wall when the tool is rotated, and a threaded portion for tapping the hole in the container wall. A passageway in the shank in communication with at least one radial inlet hole in the drilling end and an opening at the end of the shank is adapted to receive fluid from the container. The tool also includes a cylindrical chamber affixed to the end of the shank opposite to the drilling portion thereof for receiving and storing fluid passing through the passageway. The tool also includes a flexible, deformable gasket that provides a fluid-tight chamber to confine kerf generated during the drilling and tapping of the hole. The invention also includes a fluid extractor section for extracting fluid samples from the fluid collecting section.

  2. SU-D-17A-07: Development and Evaluation of a Prototype Ultrasonography Respiratory Monitoring System for 4DCT Reconstruction

    SciTech Connect (OSTI)

    Yan, P; Cheng, S; Chao, C [Columbia University Medical Center, NY, NY (United States); Jain, A [New York Presbyterian Hospital, NY, NY (United States)

    2014-06-01T23:59:59.000Z

    Purpose: Respiratory motion artifacts are commonly seen in the abdominal and thoracic CT images. A Real-time Position Management (RPM) system is integrated with CT simulator using abdominal surface as a surrogate for tracking the patient respiratory motion. The respiratory-correlated four-dimensional computed tomography (4DCT) is then reconstructed by GE advantage software. However, there are still artifacts due to inaccurate respiratory motion detecting and sorting methods. We developed an Ultrasonography Respiration Monitoring (URM) system which can directly monitor diaphragm motion to detect respiratory cycles. We also developed a new 4DCT sorting and motion estimation method to reduce the respiratory motion artifacts. The new 4DCT system was compared with RPM and the GE 4DCT system. Methods: Imaging from a GE CT scanner was simultaneously correlated with both the RPM and URM to detect respiratory motion. A radiation detector, Blackcat GM-10, recorded the X-ray on/off and synchronized with URM. The diaphragm images were acquired with Ultrasonix RP system. The respiratory wave was derived from diaphragm images and synchronized with CT scanner. A more precise peaks and valleys detection tool was developed and compared with RPM. The motion is estimated for the slices which are not in the predefined respiratory phases by using block matching and optical flow method. The CT slices were then sorted into different phases and reconstructed, compared with the images reconstructed from GE Advantage software using respiratory wave produced from RPM system. Results: The 4DCT images were reconstructed for eight patients. The discontinuity at the diaphragm level due to an inaccurate identification of phases by the RPM was significantly improved by URM system. Conclusion: Our URM 4DCT system was evaluated and compared with RPM and GE 4DCT system. The new system is user friendly and able to reduce motion artifacts. It also has the potential to monitor organ motion during therapy.

  3. Toward a sensor-actuation software platform

    E-Print Network [OSTI]

    Lin, Kaisen

    2012-01-01T23:59:59.000Z

    placement for structural health monitoring with applica-example is structural health monitoring via active sens- ing

  4. OOTW Force Design Tools

    SciTech Connect (OSTI)

    Bell, R.E.; Hartley, D.S.III; Packard, S.L.

    1999-05-01T23:59:59.000Z

    This report documents refined requirements for tools to aid the process of force design in Operations Other Than War (OOTWs). It recommends actions for the creation of one tool and work on other tools relating to mission planning. It also identifies the governmental agencies and commands with interests in each tool, from whom should come the user advisory groups overseeing the respective tool development activities. The understanding of OOTWs and their analytical support requirements has matured to the point where action can be taken in three areas: force design, collaborative analysis, and impact analysis. While the nature of the action and the length of time before complete results can be expected depends on the area, in each case the action should begin immediately. Force design for OOTWs is not a technically difficult process. Like force design for combat operations, it is a process of matching the capabilities of forces against the specified and implied tasks of the operation, considering the constraints of logistics, transport and force availabilities. However, there is a critical difference that restricts the usefulness of combat force design tools for OOTWs: the combat tools are built to infer non-combat capability requirements from combat capability requirements and cannot reverse the direction of the inference, as is required for OOTWs. Recently, OOTWs have played a larger role in force assessment, system effectiveness and tradeoff analysis, and concept and doctrine development and analysis. In the first Quadrennial Defense Review (QDR), each of the Services created its own OOTW force design tool. Unfortunately, the tools address different parts of the problem and do not coordinate the use of competing capabilities. These tools satisfied the immediate requirements of the QDR, but do not provide a long-term cost-effective solution.

  5. Better IAQ through integrating design tools for the HVACindustry

    SciTech Connect (OSTI)

    Laine, Tuomas; Kosonen, Risto; Hagstrom, Kim; Mustakallio, Panu; Yin, De-Wei; Haves, Philip; Chen, Qingyan

    2000-06-01T23:59:59.000Z

    There is currently no effective combination of interoperable design tools to cover all critical aspects of the HVAC design process. Existing design tools are separately available, but require expertise and operating time that is beyond the scope of a normal design project. For example, energy analysis and computational fluid dynamics (CFD) tools are not used in practical design, leading to poor indoor air quality and/or unnecessary energy consumption in buildings. A prototype integrated software tool for demonstration, process mapping and proof-of-concept purposes was developed under a new international, Finland/USA jointly funded development project BildIT. Individual design tools were simplified and adapted to specific applications and also integrated so that they can be used in a timely and effective manner by the designer. The core of the prototype linked together an architectural CAD system, a 3D space model, a CFD program and a building energy simulation program and it utilizes real product data from manufacturer's software. Also the complex building design, construction, maintenance and retrofit processes were mapped to get a template for the structure of the integrated design tool.

  6. Global Solar Opportunity Tool: A Tool for Policy Makers and Energy...

    Open Energy Info (EERE)

    Global Solar Opportunity Tool: A Tool for Policy Makers and Energy Analysts Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Global Solar Opportunity Tool: A Tool for...

  7. Workshop and conference on Grand Challenges applications and software technology

    SciTech Connect (OSTI)

    Not Available

    1993-12-31T23:59:59.000Z

    On May 4--7, 1993, nine federal agencies sponsored a four-day meeting on Grand Challenge applications and software technology. The objective was to bring High-Performance Computing and Communications (HPCC) Grand Challenge applications research groups supported under the federal HPCC program together with HPCC software technologists to: discuss multidisciplinary computational science research issues and approaches, identify major technology challenges facing users and providers, and refine software technology requirements for Grand Challenge applications research. The first day and a half focused on applications. Presentations were given by speakers from universities, national laboratories, and government agencies actively involved in Grand Challenge research. Five areas of research were covered: environmental and earth sciences; computational physics; computational biology, chemistry, and materials sciences; computational fluid and plasma dynamics; and applications of artificial intelligence. The next day and a half was spent in working groups in which the applications researchers were joined by software technologists. Nine breakout sessions took place: I/0, Data, and File Systems; Parallel Programming Paradigms; Performance Characterization and Evaluation of Massively Parallel Processing Applications; Program Development Tools; Building Multidisciplinary Applications; Algorithm and Libraries I; Algorithms and Libraries II; Graphics and Visualization; and National HPCC Infrastructure.

  8. International Journal of Software Engineering and Knowledge Engineering Vol. 12, No. 2 (2002) 175200

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    2002-01-01T23:59:59.000Z

    University, Morgantown, WV 26506-6109, USA cukic@csee.wvu.edu BRIAN J. TAYLOR Institute for Software Research as inputs, including closed-loop process controllers, robotic manipulators, nuclear monitor- ing systems set of test trajectories into a large set suitable, for example, for system safety assurance. Statis

  9. On Using Cloud Platforms in a Software Architecture for Smart Energy Grids Yogesh Simmhan

    E-Print Network [OSTI]

    Prasanna, Viktor K.

    On Using Cloud Platforms in a Software Architecture for Smart Energy Grids (Poster) Yogesh Simmhan utilities to provide dynamic feedback to curtail peak power load. Smart Grid infrastructure being deployed to monitor and control energy assets for their optimal use. Smart power grids, which leverage large scale

  10. A Formal Embedded Software Verification using Software Fault Tree Analysis

    E-Print Network [OSTI]

    -mail: jbyoo@konkuk.ac.kr Extended Abstract In developing embedded software such as nuclear reactor protection checking [4]. We used a prototype version of the KNICS RPS [5] in Korean nuclear power plants, but it may also be able to auto-populate address book changes. This is based on the use of an operating

  11. Manual dos Softwares Manuseio do TheSky Astronomy Software

    E-Print Network [OSTI]

    Software Esta é a tela principal. 1- Para você capturar imagens com a Câmera CCD, você precisa conectá imagens. Clique em Chose Folder... e crie os diretórios com os nomes e lugares desejados; 5- Depois de criar os diretórios, selecione o item AutoSave on; 6- Para começar a capturar as imagens, clique em Take

  12. Toward a State of Good Repair for Railroad Bridges through Structural Health Monitoring

    E-Print Network [OSTI]

    Bustamante, Fabián E.

    Toward a State of Good Repair for Railroad Bridges through Structural Health Monitoring NUTC of this research is to add a new tool to the asset management toolbox: structural health monitoring, particularly is Structural Health Monitoring (SHM)? SHM is process of intelligently collecting data from sensors on critical

  13. HP Steam Trap Monitoring

    E-Print Network [OSTI]

    Pascone, S.

    2011-01-01T23:59:59.000Z

    STEAM MONITORING HP Steam Trap Monitoring HP Steam Trap Monitoring ? 12-18 months payback! ? 3-5% permanent reduction in consumption ? LEED Pt.? Innovation in Operations EB O&M ? Saved clients over $1,000,000 Annual consumption... Steam Trap Monitoring ? Real-time monitoring for high-pressure critical traps (>15 PSIG) ? Average total system cost $25K - $50K ? Web-Based or Modbus/BMS Integration Basic Installation Wireless Signal Transmitter Receiver Repeater...

  14. Software Process Improvement 98, Monte Carlo, December 1998. 1 Development and Integration Issues about Software Engineering,

    E-Print Network [OSTI]

    Laporte, Claude Y.

    Software Process Improvement 98, Monte Carlo, December 1998. 1 Development and Integration Issues about Software Engineering, Systems Engineering and Project Management Processes Claude Y. Laporte software engineering, systems engineering, supporting processes and project management process over

  15. Monitoring Building Systems for Schedule Compliance

    SciTech Connect (OSTI)

    Jensen, Andrew M.; Belew, Shan T.

    2013-02-19T23:59:59.000Z

    As Pacific Northwest National Laboratory (PNNL) initiated a Core Business Hours program, it became a challenge to ensure that the hundreds of systems campus wide were operating within their programmed schedules. Therefore, a collaborative exchange between PNNL operations and PNNL researchers developing the Decision Support for Operations and Maintenance (DSOM) software package was initiated to create a tool to solve this problem. This new DSOM tool verifies systems are operating within scheduled operation times by polling Building Automation and Control Network (BACnet) identifiers of systems’ on/off or command statuses. The tool records the time spent in operation state (ON) and totalizes each system over a rolling 7-day period, highlighting systems that are running over the scheduled hours. This snapshot view allows building management to look quickly at the entire campus to ensure that systems are not operating beyond their scheduled hours.

  16. Possible Savings Achievable by Recipients of Training and Software Provided by the U.S Department of Energy’s Industrial Technologies Program

    E-Print Network [OSTI]

    Schweitzer, M.; Martin, M. A.; Schmoyer, R. L.

    2008-01-01T23:59:59.000Z

    efficiency of their operations. Among other things, Save Energy Now conducts training sessions on a variety of energy systems that are important to industry (i.e., compressed air, steam, process heat, pumps, motors, and fans) and distributes software tools...

  17. Minds, Brains and Tools 

    E-Print Network [OSTI]

    Clark, Andy

    2002-01-01T23:59:59.000Z

    The selected texts for this discussion were two recent pieces by Dennett (“Things About Things” and “Making Tools for Thinking” – henceforth TAT and MTT respectively) and one oldie-but-goodie (“Styles of Mental Representation”, ...

  18. Friction stir welding tool

    DOE Patents [OSTI]

    Tolle, Charles R. (Idaho Falls, ID); Clark, Denis E. (Idaho Falls, ID); Barnes, Timothy A. (Ammon, ID)

    2008-04-15T23:59:59.000Z

    A friction stir welding tool is described and which includes a shank portion; a shoulder portion which is releasably engageable with the shank portion; and a pin which is releasably engageable with the shoulder portion.

  19. Sandia Modeling Tool Webinar

    Broader source: Energy.gov [DOE]

    Hosted by the Energy Department and Western Area Power Administration, this webinar will show attendees about what collaborative, stakeholder-driven modeling is and how the modeling tools and process developed by Sandia can be used in Indian Country.

  20. UNIX Public Tools

    Broader source: Energy.gov [DOE]

    SATAN, the System Administrator Tool for Analyzing Networks, is a network security analyzer designed by Dan Farmer and Wietse Venema. SATAN scans systems connected to the network noting the...

  1. Smart tool holder

    DOE Patents [OSTI]

    Day, Robert Dean (Los Alamos, NM); Foreman, Larry R. (Los Alamos, NM); Hatch, Douglas J. (Los Alamos, NM); Meadows, Mark S. (Boston, MA)

    1998-01-01T23:59:59.000Z

    There is provided an apparatus for machining surfaces to accuracies within the nanometer range by use of electrical current flow through the contact of the cutting tool with the workpiece as a feedback signal to control depth of cut.

  2. PPA Tools and Update

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PPA Tools & Update Chandra Shah chandra.shah@nel.gov October 21, 2010 2 | FEDERAL ENERGY MANAGEMENT PROGRAM femp.energy.gov * PPA (15 minutes) - Resources - Discussion * URESC (15...

  3. Modeling of Tool Wear and Tool Fracture in Micromilling

    E-Print Network [OSTI]

    Shiosaki, Dominic

    2012-02-14T23:59:59.000Z

    of aluminum and titanium. Finite element analysis and tool modeling compliment experimental data. Cumulative tool wear based on Taylor model shows decreasing tool life with increasing feed rate and increasing cutting speed on aluminum. Inconsistent results...

  4. Institute for Software Technology Wissensverarbeitung

    E-Print Network [OSTI]

    Motivation Example correct behavior battery(c)(ab(c)voltage(c))battery(c)(ab(c)voltage(c)) bulb for Software Technology Motivation Example cont. t t tsystem structure battery(B). bulb(L1). bulb(L2). bulb(L3 the fact that a bulb does not lit if it is broken · solution: model faulty behavior battery

  5. Software Fault Diagnosis Peter Zoeteweij

    E-Print Network [OSTI]

    Zoeteweij, Peter

    Lab, Faculty of Electrical Engineering, Mathematics, and Computer Science, Delft University-to-day basis is constantly growing. Combined with a practically constant rate of faults per line of code in the software development cycle, which aim at exposing such discrepancies. In this context, automated diagnosis

  6. LEGOS: Object-based software components for mission-critical systems. Final report, June 1, 1995--December 31, 1997

    SciTech Connect (OSTI)

    NONE

    1998-08-01T23:59:59.000Z

    An estimated 85% of the installed base of software is a custom application with a production quantity of one. In practice, almost 100% of military software systems are custom software. Paradoxically, the marginal costs of producing additional units are near zero. So why hasn`t the software market, a market with high design costs and low productions costs evolved like other similar custom widget industries, such as automobiles and hardware chips? The military software industry seems immune to market pressures that have motivated a multilevel supply chain structure in other widget industries: design cost recovery, improve quality through specialization, and enable rapid assembly from purchased components. The primary goal of the ComponentWare Consortium (CWC) technology plan was to overcome barriers to building and deploying mission-critical information systems by using verified, reusable software components (Component Ware). The adoption of the ComponentWare infrastructure is predicated upon a critical mass of the leading platform vendors` inevitable adoption of adopting emerging, object-based, distributed computing frameworks--initially CORBA and COM/OLE. The long-range goal of this work is to build and deploy military systems from verified reusable architectures. The promise of component-based applications is to enable developers to snap together new applications by mixing and matching prefabricated software components. A key result of this effort is the concept of reusable software architectures. A second important contribution is the notion that a software architecture is something that can be captured in a formal language and reused across multiple applications. The formalization and reuse of software architectures provide major cost and schedule improvements. The Unified Modeling Language (UML) is fast becoming the industry standard for object-oriented analysis and design notation for object-based systems. However, the lack of a standard real-time distributed object operating system, lack of a standard Computer-Aided Software Environment (CASE) tool notation and lack of a standard CASE tool repository has limited the realization of component software. The approach to fulfilling this need is the software component factory innovation. The factory approach takes advantage of emerging standards such as UML, CORBA, Java and the Internet. The key technical innovation of the software component factory is the ability to assemble and test new system configurations as well as assemble new tools on demand from existing tools and architecture design repositories.

  7. Sandia Software Guidelines, Volume 2. Documentation

    SciTech Connect (OSTI)

    NONE

    1995-09-01T23:59:59.000Z

    This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. In consonance with the IEEE Standards for software documentation, this volume provides guidance in the selection of an adequate document set for a software project and example formats for many types of software documentation. A tutorial on life cycle documentation is also provided. Extended document thematic outlines and working examples of software documents are available on electronic media as an extension of this volume.

  8. Software archeology: a case study in software quality assurance and design

    SciTech Connect (OSTI)

    Macdonald, John M [Los Alamos National Laboratory; Lloyd, Jane A [Los Alamos National Laboratory; Turner, Cameron J [COLORADO SCHOOL OF MINES

    2009-01-01T23:59:59.000Z

    Ideally, quality is designed into software, just as quality is designed into hardware. However, when dealing with legacy systems, demonstrating that the software meets required quality standards may be difficult to achieve. As the need to demonstrate the quality of existing software was recognized at Los Alamos National Laboratory (LANL), an effort was initiated to uncover and demonstrate that legacy software met the required quality standards. This effort led to the development of a reverse engineering approach referred to as software archaeology. This paper documents the software archaeology approaches used at LANL to document legacy software systems. A case study for the Robotic Integrated Packaging System (RIPS) software is included.

  9. Software development for a novel WSN platform P. Vlgyesi, J. Sallai, . Ldeczi

    E-Print Network [OSTI]

    Maróti, Miklós

    that helps manage this com- plexity. The two main tools are a domain-specific modeling environment because joint design of hardware configuration and soft-core hosted em- bedded software is a significant for innovative design methodologies, since bound- aries between application, services, operating system

  10. A UNIFIED HARDWARE/SOFTWARE CO-SYNTHESIS SOLUTION FOR SIGNAL PROCESSING SYSTEMS

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    A UNIFIED HARDWARE/SOFTWARE CO-SYNTHESIS SOLUTION FOR SIGNAL PROCESSING SYSTEMS Endri Bezati1.lastname}@insa-rennes.fr ABSTRACT This paper presents a methodology to specify from a high- level data-flow description the co-synthesis tools and then an analysis of the generated hardware and soft- ware results are given

  11. Computers & Industrial Engineering (In Press) Wu & Liu Development and Evaluation of an Ergonomic Software Package

    E-Print Network [OSTI]

    Wu, Changxu (Sean)

    Computers & Industrial Engineering (In Press) Wu & Liu 1 Development and Evaluation of an Ergonomic-MHP are also discussed on how to make it a comprehensive proactive ergonomic design and analysis tool. Keywords: Ergonomics, Software package, Queueing Network, Human performance, Mental workload #12;Computers & Industrial

  12. Tube cutter tool and method of use for coupon removal

    DOE Patents [OSTI]

    Nachbar, Henry D. (Ballston Lake, NY); Etten, Jr., Marvin P. (Ballston Lake, NY); Kurowski, Paul A. (Scotia, NY)

    1997-01-01T23:59:59.000Z

    A tube cutter tool is insertable into a tube for cutting a coupon from a damaged site on the exterior of the tube. Prior to using the tool, the damaged site is first located from the interior of the tube using a multi-coil pancake eddy current test probe. The damaged site is then marked. A fiber optic probe is used to monitor the subsequent cutting procedure which is performed using a hole saw mounted on the tube cutter tool. Prior to completion of the cutting procedure, a drill in the center of the hole saw is drilled into the coupon to hold it in place.

  13. Tube cutter tool and method of use for coupon removal

    DOE Patents [OSTI]

    Nachbar, H.D.; Etten, M.P. Jr.; Kurowski, P.A.

    1997-05-06T23:59:59.000Z

    A tube cutter tool is insertable into a tube for cutting a coupon from a damaged site on the exterior of the tube. Prior to using the tool, the damaged site is first located from the interior of the tube using a multi-coil pancake eddy current test probe. The damaged site is then marked. A fiber optic probe is used to monitor the subsequent cutting procedure which is performed using a hole saw mounted on the tube cutter tool. Prior to completion of the cutting procedure, a drill in the center of the hole saw is drilled into the coupon to hold it in place. 4 figs.

  14. Development of a Software Framework for System-Level Carbon Sequestration Risk Assessment

    SciTech Connect (OSTI)

    Miller, R.

    2013-02-28T23:59:59.000Z

    The overall purpose of this project was to identify, evaluate, select, develop, and test a suite of enhancements to the GoldSim software program, in order to make it a better tool for use in support of Carbon Capture and Sequestration (CCS) projects. The GoldSim software is a foundational tool used by scientists at NETL and at other laboratories and research institutions to evaluate system-level risks of proposed CCS projects. The primary product of the project was a series of successively improved versions of the GoldSim software, supported by an extensive User’s Guide. All of the enhancements were tested by scientists at Los Alamos National Laboratory, and several of the enhancements have already been incorporated into the CO{sub 2}-PENS sequestration model.

  15. Software architecture for the ORNL large-coil test facility data system

    SciTech Connect (OSTI)

    Blair, E.T.; Baylor, L.R.

    1986-08-01T23:59:59.000Z

    The VAX-based data-acquisition system for the International Fusion Superconducting Magnet Test Facility (IFSMTF) at Oak Ridge National Laboratory (ORNL) is a second-generation system that evolved from a PDP-11/60-based system used during the initial phase of facility testing. The VAX-based software represents a layered implementation that provides integrated access to all of the data sources within the system, decoupling end-user data retrieval from various front-end data sources through a combination of software architecture and instrumentation data bases. Independent VAX processes manage the various front-end data sources, each being responsible for controlling, monitoring, acquiring, and disposing data and control parameters for access from the data retrieval software. This paper describes the software architecture and the functionality incorporated into the various layers of the data system.

  16. Software architecture for the ORNL large coil test facility data system

    SciTech Connect (OSTI)

    Blair, E.T.; Baylor, L.R.

    1986-01-01T23:59:59.000Z

    The VAX-based data acquisition system for the International Fusion Superconducting Magnet Test Facility (IFSMTF) at Oak Ridge National Laboratory (ORNL) is a second-generation system that evolved from a PDP-11/60-based system used during the initial phase of facility testing. The VAX-based software represents a layered implementation that provides integrated access to all of the data sources within the system, deoupling end-user data retrieval from various front-end data sources through a combination of software architecture and instrumentation data bases. Independent VAX processes manage the various front-end data sources, each being responsible for controlling, monitoring, acquiring and disposing data and control parameters for access from the data retrieval software. This paper describes the software architecture and the functionality incorporated into the various layers of the data system.

  17. Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in IGCC Powerplants

    SciTech Connect (OSTI)

    Kenneth A. Yackly

    2005-12-01T23:59:59.000Z

    The ''Enabling & Information Technology To Increase RAM for Advanced Powerplants'' program, by DOE request, was re-directed, de-scoped to two tasks, shortened to a 2-year period of performance, and refocused to develop, validate and accelerate the commercial use of enabling materials technologies and sensors for coal/IGCC powerplants. The new program was re-titled ''Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in IGCC Powerplants''. This final report summarizes the work accomplished from March 1, 2003 to March 31, 2004 on the four original tasks, and the work accomplished from April 1, 2004 to July 30, 2005 on the two re-directed tasks. The program Tasks are summarized below: Task 1--IGCC Environmental Impact on high Temperature Materials: The first task was refocused to address IGCC environmental impacts on high temperature materials used in gas turbines. This task screened material performance and quantified the effects of high temperature erosion and corrosion of hot gas path materials in coal/IGCC applications. The materials of interest included those in current service as well as advanced, high-performance alloys and coatings. Task 2--Material In-Service Health Monitoring: The second task was reduced in scope to demonstrate new technologies to determine the inservice health of advanced technology coal/IGCC powerplants. The task focused on two critical sensing needs for advanced coal/IGCC gas turbines: (1) Fuel Quality Sensor to rapidly determine the fuel heating value for more precise control of the gas turbine, and detection of fuel impurities that could lead to rapid component degradation. (2) Infra-Red Pyrometer to continuously measure the temperature of gas turbine buckets, nozzles, and combustor hardware. Task 3--Advanced Methods for Combustion Monitoring and Control: The third task was originally to develop and validate advanced monitoring and control methods for coal/IGCC gas turbine combustion systems. This task was refocused to address pre-mixed combustion phenomenon for IGCC applications. The work effort on this task was shifted to another joint GE Energy/DOE-NETL program investigation, High Hydrogen Pre-mixer Designs, as of April 1, 2004. Task 4--Information Technology (IT) Integration: The fourth task was originally to demonstrate Information Technology (IT) tools for advanced technology coal/IGCC powerplant condition assessment and condition based maintenance. The task focused on development of GateCycle. software to model complete-plant IGCC systems, and the Universal On-Site Monitor (UOSM) to collect and integrate data from multiple condition monitoring applications at a power plant. The work on this task was stopped as of April 1, 2004.

  18. Automatische stress tests voor software code werken uitstekend Hoe bepaal ik de kwaliteit van een stuk software? Net zoals bij banken, willen we software

    E-Print Network [OSTI]

    Al Hanbali, Ahmad

    stuk software? Net zoals bij banken, willen we software aan een stress test onderwerpen, en een rating

  19. Data Mining Tools Irfan Altas

    E-Print Network [OSTI]

    Turlach, Berwin A.

    Data Mining Tools Irfan Altas School of Information Studies, Charles Sturt University Wagga Wagga discuss several scalable and parallel discovery and predictive data mining tools. They successfully Data mining tools, thin plate splines, BMARS, revolver, regression, smoothing, addi­ tive models

  20. State-of-Health Software for the Automated Radioxenon Sampler/Analyzer

    SciTech Connect (OSTI)

    Heimbigner, Tom R.; Bowyer, Ted W.; Hayes, James C.; Hubbard, Charles W.; McIntyre, Justin I.; Panisko, Mark E.; Ripplinger, Mike D.; Suarez, Reynold

    2004-09-22T23:59:59.000Z

    The Automated Radioxenon Analyzer/Sampler (ARSA) is a complex gas-collection and analysis system that requires constant online monitoring of system operations and overall system health. The software-control system records and monitors and over 100 different system sensors (temperature, pressures, voltages, etc.) A real-time record of the system state allows the system to monitor for unsafe conditions and maintain the system in a safe state regardless of external or internal failures (vacuum pump, valve or power failures, and runaway temperatures are a few examples). Another function of real-time monitoring allows the user to troubleshoot the system when a problem arises, should a minor sensor or a major system failure occur. This paper will outline the general scheme used by the state-of-health program to monitor and assess the system, the graphical user interface program and the alert message system, and give specific examples of proper system performance and some system failures.