Powered by Deep Web Technologies
Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Thermal Characterization and Analysis of A123 Systems Battery Cells, Modules and Packs: Cooperative Research and Development Final Report, CRADA Number CRD-07-243  

SciTech Connect

In support of the A123 Systems battery development program with USABC/DOE, NREL provided technical support in thermal characterization, analysis and management of batteries. NREL's effort was part of Energy Storage Project funded by DOE Vehicle Technologies Program. The purpose of this work was for NREL to perform thermal characterization and analysis of A123 Systems cells and modules with the aim for Al23 Systems to improve the thermal performance of their battery cells, modules and packs.

Pesaran, A.

2012-03-01T23:59:59.000Z

2

Snail modulates cell metabolism in MDCK cells  

SciTech Connect

Highlights: ? MDCK/snail cells were more sensitive to glucose deprivation than MDCK/neo cells. ? MDCK/snail cells had decreased oxidative phosphorylation, O{sub 2} consumption and ATP content. ? TCA cycle enzyme activity, but not expression, was lower in MDCK/snail cells. ? MDCK/snail cells showed reduced PDH activity and increased PDK1 expression. ? MDCK/snail cells showed reduced expression of GLS2 and ACLY. -- Abstract: Snail, a repressor of E-cadherin gene transcription, induces epithelial-to-mesenchymal transition and is involved in tumor progression. Snail also mediates resistance to cell death induced by serum depletion. By contrast, we observed that snail-expressing MDCK (MDCK/snail) cells undergo cell death at a higher rate than control (MDCK/neo) cells in low-glucose medium. Therefore, we investigated whether snail expression influences cell metabolism in MDCK cells. Although gylcolysis was not affected in MDCK/snail cells, they did exhibit reduced pyruvate dehydrogenase (PDH) activity, which controls pyruvate entry into the tricarboxylic acid (TCA) cycle. Indeed, the activity of multiple enzymes involved in the TCA cycle was decreased in MDCK/snail cells, including that of mitochondrial NADP{sup +}-dependent isocitrate dehydrogenase (IDH2), succinate dehydrogenase (SDH), and electron transport Complex II and Complex IV. Consequently, lower ATP content, lower oxygen consumption and increased survival under hypoxic conditions was also observed in MDCK/snail cells compared to MDCK/neo cells. In addition, the expression and promoter activity of pyruvate dehydrogenase kinase 1 (PDK1), which phosphorylates and inhibits the activity of PDH, was increased in MDCK/snail cells, while expression levels of glutaminase 2 (GLS2) and ATP-citrate lyase (ACLY), which are involved in glutaminolysis and fatty acid synthesis, were decreased in MDCK/snail cells. These results suggest that snail modulates cell metabolism by altering the expression and activity of key enzymes. This results in enhanced glucose dependency and leads to cell death under low-glucose conditions. On the other hand, the reduced requirements for oxygen and nutrients from the surrounding environment, might confer the resistance to cell death induced by hypoxia and malnutrition.

Haraguchi, Misako, E-mail: haraguci@m3.kufm.kagoshima-u.ac.jp [Department of Biochemistry and Molecular Biology, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890-8544 (Japan)] [Department of Biochemistry and Molecular Biology, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890-8544 (Japan); Indo, Hiroko P. [Department of Maxillofacial Radiology, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890-8544 (Japan)] [Department of Maxillofacial Radiology, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890-8544 (Japan); Iwasaki, Yasumasa [Health Care Center, Kochi University, Kochi 780-8520 (Japan)] [Health Care Center, Kochi University, Kochi 780-8520 (Japan); Iwashita, Yoichiro [Department of Maxillofacial Radiology, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890-8544 (Japan)] [Department of Maxillofacial Radiology, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890-8544 (Japan); Fukushige, Tomoko [Department of Dermatology, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890-8544 (Japan)] [Department of Dermatology, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890-8544 (Japan); Majima, Hideyuki J. [Department of Maxillofacial Radiology, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890-8544 (Japan)] [Department of Maxillofacial Radiology, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890-8544 (Japan); Izumo, Kimiko; Horiuchi, Masahisa [Department of Environmental Medicine, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890-8544 (Japan)] [Department of Environmental Medicine, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890-8544 (Japan); Kanekura, Takuro [Department of Dermatology, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890-8544 (Japan)] [Department of Dermatology, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890-8544 (Japan); Furukawa, Tatsuhiko [Department of Molecular Oncology, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890-8544 (Japan)] [Department of Molecular Oncology, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890-8544 (Japan); Ozawa, Masayuki [Department of Biochemistry and Molecular Biology, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890-8544 (Japan)] [Department of Biochemistry and Molecular Biology, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890-8544 (Japan)

2013-03-22T23:59:59.000Z

3

Module level solutions to solar cell polarization  

DOE Patents (OSTI)

A solar cell module includes interconnected solar cells, a transparent cover over the front sides of the solar cells, and a backsheet on the backsides of the solar cells. The solar cell module includes an electrical insulator between the transparent cover and the front sides of the solar cells. An encapsulant protectively packages the solar cells. To prevent polarization, the insulator has resistance suitable to prevent charge from leaking from the front sides of the solar cells to other portions of the solar cell module by way of the transparent cover. The insulator may be attached (e.g., by coating) directly on an underside of the transparent cover or be a separate layer formed between layers of the encapsulant. The solar cells may be back junction solar cells.

Xavier, Grace (Fremont, CA), Li; Bo (San Jose, CA)

2012-05-29T23:59:59.000Z

4

Module 5: Fuel Cell Systems  

Energy.gov (U.S. Department of Energy (DOE))

This course covers the systems required to operate a fuel cell engine, the components and functionality of each fuel cell system

5

Solar Cell Modules With Improved Backskin  

DOE Patents (OSTI)

A laminated solar cell module comprises a front light transmitting support, a plurality of interconnected solar cells encapsulated by a light-transmitting encapsulant material, and an improved backskin formed of an ionomer/nylon alloy. The improved backskin has a toughness and melting point temperature sufficiently great to avoid any likelihood of it being pierced by any of the components that interconnect the solar cells.

Gonsiorawski, Ronald C. (Danvers, MA)

2003-12-09T23:59:59.000Z

6

Very High Efficiency Solar Cell Modules  

SciTech Connect

The Very High Efficiency Solar Cell (VHESC) program is developing integrated optical system - PV modules for portable applications that operate at greater than 50% efficiency. We are integrating the optical design with the solar cell design, and have entered previously unoccupied design space. Our approach is driven by proven quantitative models for the solar cell design, the optical design, and the integration of these designs. Optical systems efficiency with an optical efficiency of 93% and solar cell device results under ideal dichroic splitting optics summing to 42.7 {+-} 2.5% are described.

Barnett, A.; Kirkpatrick, D.; Honsberg, C.; Moore, D.; Wanlass, M.; Emery, K.; Schwartz, R.; Carlson, D.; Bowden, S.; Aiken, D.; Gray, A.; Kurtz, S.; Kazmerski, L., et al

2009-01-01T23:59:59.000Z

7

Solar module having reflector between cells  

DOE Patents (OSTI)

A photovoltaic module comprising an array of electrically interconnected photovoltaic cells disposed in a planar and mutually spaced relationship between a light-transparent front cover member in sheet form and a back sheet structure is provided with a novel light-reflecting means disposed between adjacent cells for reflecting light falling in the areas between cells back toward said transparent cover member for further internal reflection onto the solar cells. The light-reflecting comprises a flexible plastic film that has been embossed so as to have a plurality of small V-shaped grooves in its front surface, and a thin light-reflecting coating on said front surface, the portions of said coating along the sides of said grooves forming light-reflecting facets, said grooves being formed so that said facets will reflect light impinging thereon back into said transparent cover sheet with an angle of incidence greater than the critical angle, whereby substantially all of the reflected light will be internally reflected from said cover sheet back to said solar modules, thereby increasing the current output of the module.

Kardauskas, Michael J. (Billerica, MA)

1999-01-01T23:59:59.000Z

8

Concentrator Solar Cell Modules and Systems Developed in Japan  

Science Journals Connector (OSTI)

Dissemination of photovoltaic (PV) systems has advanced, and solar cell module production has also significantly increased in ... Japan organized by the New Energy and Industrial Technology Development Organizati...

2007-01-01T23:59:59.000Z

9

Solid oxide fuel cell matrix and modules  

DOE Patents (OSTI)

Porous refractory ceramic blocks arranged in an abutting, stacked configuration and forming a three dimensional array provide a support structure and coupling means for a plurality of solid oxide fuel cells (SOFCs). The stack of ceramic blocks is self-supporting, with a plurality of such stacked arrays forming a matrix enclosed in an insulating refractory brick structure having an outer steel layer. The necessary connections for air, fuel, burnt gas, and anode and cathode connections are provided through the brick and steel outer shell. The ceramic blocks are so designed with respect to the strings of modules that by simple and logical design the strings could be replaced by hot reloading if one should fail. The hot reloading concept has not been included in any previous designs. 11 figs.

Riley, B.

1988-04-22T23:59:59.000Z

10

Solid oxide fuel cell matrix and modules  

DOE Patents (OSTI)

Porous refractory ceramic blocks arranged in an abutting, stacked configuration and forming a three dimensional array provide a support structure and coupling means for a plurality of solid oxide fuel cells (SOFCs). Each of the blocks includes a square center channel which forms a vertical shaft when the blocks are arranged in a stacked array. Positioned within the channel is a SOFC unit cell such that a plurality of such SOFC units disposed within a vertical shaft form a string of SOFC units coupled in series. A first pair of facing inner walls of each of the blocks each include an interconnecting channel hole cut horizontally and vertically into the block walls to form gas exit channels. A second pair of facing lateral walls of each block further include a pair of inner half circular grooves which form sleeves to accommodate anode fuel and cathode air tubes. The stack of ceramic blocks is self-supporting, with a plurality of such stacked arrays forming a matrix enclosed in an insulating refractory brick structure having an outer steel layer. The necessary connections for air, fuel, burnt gas, and anode and cathode connections are provided through the brick and steel outer shell. The ceramic blocks are so designed with respect to the strings of modules that by simple and logical design the strings could be replaced by hot reloading if one should fail. The hot reloading concept has not been included in any previous designs.

Riley, Brian (Willimantic, CT)

1990-01-01T23:59:59.000Z

11

Measurements and Characterization: Cell and Module Performance (Fact Sheet)  

SciTech Connect

Capabilities fact sheet for the National Center for Photovoltaics: Measurements and Characterization -- Cell and Module Performance. One-sided sheet that includes Scope, Core Competencies and Capabilities, and Contact/Web information.

Not Available

2011-02-01T23:59:59.000Z

12

Module 6: Fuel Cell Engine Safety  

Energy.gov (U.S. Department of Energy (DOE))

This course will cover the hazards and safety provisions associated with hydrogen and fuel cell engine systems

13

PV Cell and Module Calibration Activities at NREL  

SciTech Connect

The performance of PV cells and modules with respect to standard reference conditions is a key indicator of progress of a given technology. This task provides the U.S. terrestrial PV community with the most accurate measurements that are technically possible in a timely fashion. The international module certification and accreditation program PVGap requires certification laboratories to maintain their calibration traceability path to groups like this one. The politics of a "world record" efficiency requires that an independent laboratory perform these measurements for credibility. Most manufacturers base their module peak watt rating upon standards and reference cells calibrated under this task. This task has been involved in reconciling disputes between manufacturers and their cell suppliers in terms of expected versus actual performance. This task has also served as a resource to the PV community for consultation on solar simulation, current versus voltage measurement instrumentation, measurement procedures and measurement artifacts.

Emery, K.; Anderberg, A.; Kiehl, J.; Mack, C.; Moriarty, T.; Ottoson, L.; Rummel, S.

2005-11-01T23:59:59.000Z

14

Improved amorphous silicon alloy solar cells for module fabrication  

SciTech Connect

An initial conversion efficiency of 13.5% has been obtained on a triple-junction triple-bandgap device fabricated in a large-area deposition reactor capable of producing one-square-foot modules. The intrinsic layer of the top cell is a wide bandgap amorphous silicon alloy. The middle and bottom cells employ high quality amorphous silicon-germanium alloy. The high efficiency of the triple-junction cell is attributed to the relative reduction of the optical loss in the top tunnel junction and the improvement in the quality of the middle and bottom component cells. Triple-junction devices with initial efficiency of 13.3% have shown saturation at 11.6% after light soaking. Modules of aperture area 909 cm{sup 2} have been fabricated using an assembly process similar to the one being currently used in their manufacturing line. The module design consists of one large-area, high-current monolithic multijunction device. The status of the small-area devices and modules is described.

Banerjee, A.; Yang, J.; Guha, S.

1997-07-01T23:59:59.000Z

15

Encapsulant Material For Solar Cell Module And Laminated Glass Applications  

DOE Patents (OSTI)

An encapsulant material includes a layer of metallocene polyethylene disposed between two layers of an acid copolymer of polyethylene. More specifically, the layer of metallocene polyethylene is disposed adjacent a rear surface of the first layer of the acid copolymer of polyethylene, and a second layer of the acid copolymer of polyethlene is disposed adjacent a rear surface of the layer of metallocene polyethylene. The encapsulant material can be used in solar cell module and laminated glass applications.

Hanoka, Jack I. (Brookline, MA); Klemchuk, Peter P. (Watertown, CT)

2001-02-13T23:59:59.000Z

16

Encapsulant Material For Solar Cell Module And Laminated Glass Applications  

DOE Patents (OSTI)

An encapsulant material includes a layer of metallocene polyethylene disposed between two layers of ionomer. More specifically, the layer of metallocene polyethylene is disposed adjacent a rear surface of the first ionomer layer, and a second layer of ionomer is disposed adjacent a rear surface of the layer of metallocene polyethylene. The encapsulant material can be used in solar cell module and laminated glass applications.

Hanoka, Jack I. (Brookline, MA)

2000-09-05T23:59:59.000Z

17

Electrical isolation of component cells in monolithically interconnected modules  

DOE Patents (OSTI)

A monolithically interconnected photovoltaic module having cells which are electrically connected which comprises a substrate, a plurality of cells formed over the substrate, each cell including a primary absorber layer having a light receiving surface and a p-region, formed with a p-type dopant, and an n-region formed with an n-type dopant adjacent the p-region to form a single pn-junction, and a cell isolation diode layer having a p-region, formed with a p-type dopant, and an n-region formed with an n-type dopant adjacent the p-region to form a single pn-junction, the diode layer intervening the substrate and the absorber layer wherein the absorber and diode interfacial regions of a same conductivity type orientation, the diode layer having a reverse-breakdown voltage sufficient to prevent inter-cell shunting, and each cell electrically isolated from adjacent cells with a vertical trench trough the pn-junction of the diode layer, interconnects disposed in the trenches contacting the absorber regions of adjacent cells which are doped an opposite conductivity type, and electrical contacts.

Wanlass, Mark W. (Golden, CO)

2001-01-01T23:59:59.000Z

18

Student ID Number Date of birth Cell Phone  

E-Print Network (OSTI)

Name Student ID Number Date of birth Cell Phone New Housing Student Current Housing Student All's phone Crime 2 Information about charges or crime convicted of Date of conviction Court convicted in Sentence received Probation dates Probation officer's name Probation officer's phone Consent: I authorize

Pantaleone, Jim

19

Technical evaluation of Solar Cells, Inc., CdTe modules and array at NREL  

SciTech Connect

The Engineering and Technology Validation Team at the National Renewable Energy Laboratory (NREL) conducts in-situ technical evaluations of polycrystalline thin-film photovoltaic (PV) modules and arrays. This paper focuses on the technical evaluation of Solar Cells, Inc., (SCI) cadmium telluride (CdTe) module and array performance by attempting to correlate individual module and array performance. This is done by examining the performance and stability of the modules and array over a period of more than one year. Temperature coefficients for module and array parameters (P{sub max}V{sub oc}, V{sub max}, I{sub sc}, I{sub max}) are also calculated.

Kroposki, B.; Strand, T.; Hansen, R. [and others] [and others

1996-05-01T23:59:59.000Z

20

Localization of a Region in the Fusion Protein of Avian Metapneumovirus That Modulates Cell-Cell Fusion  

Science Journals Connector (OSTI)

...Interactions Localization of a Region in the Fusion Protein of Avian Metapneumovirus That Modulates Cell-Cell Fusion Yongwei Wei a Kurtis Feng a * Xiangjie...envelope with a host cell membrane. Membrane fusion of hMPV appears to be unique, in that...

Yongwei Wei; Kurtis Feng; Xiangjie Yao; Hui Cai; Junan Li; Anne M. Mirza; Ronald M. Iorio; Jianrong Li

2012-08-22T23:59:59.000Z

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Adhesion Molecule-Mediated Hippo Pathway Modulates Hemangioendothelioma Cell Behavior  

Science Journals Connector (OSTI)

...endothelial cell adhesion molecules in brain microvascular endothelial cell proliferation...pathway parameters, comparing wild-type brain microvascular endothelial cells (7, 8...Wisconsin, Madison, WI) (6, 9). Brain endothelial cells (BEC) were isolated...

Masayuki Tsuneki; Joseph A. Madri

2014-09-29T23:59:59.000Z

22

Plant Flavonoid Modulation of Immune and Inflammatory Cell Functions  

Science Journals Connector (OSTI)

The immune system is a highly complex, intricately regulated group of cells whose integrated function is essential to health. Cells of the immune system may interact in a cognate cell-cell manner and may also ...

Elliott Middleton Jr.; Chithan Kandaswami

1993-01-01T23:59:59.000Z

23

Cell-type specific cholinergic modulation of the cortex  

E-Print Network (OSTI)

The cholinergic innervation of the neocortex by afferent fibers originating in the nucleus basalis (NB) of the basal forebrain is implicated in modulating diverse neocortical functions including information processing, ...

Chen, Naiyan

2013-01-01T23:59:59.000Z

24

Solar cell modules with improved backskin and methods for forming same  

DOE Patents (OSTI)

A laminated solar cell module with a backskin layer that reduces the materials and labor required during the manufacturing process. The solar cell module includes a rigid front support layer formed of light transmitting material having first and second surfaces. A transparent encapsulant layer has a first surface disposed adjacent the second surface of the front support layer. A plurality of interconnected solar cells have a first surface disposed adjacent a second surface of the transparent encapsulant layer. The backskin layer is formed of a thermoplastic olefin, which includes first ionomer, a second ionomer, glass fiber, and carbon black. A first surface of the backskin layer is disposed adjacent a second surface of the interconnected solar cells. The transparent encapsulant layer and the backskin layer, in combination, encapsulate the interconnected solar cells. An end portion of the backskin layer can be wrapped around the edge of the module for contacting the first surface of the front support layer to form an edge seal. A laminated solar cell module with a backskin layer that reduces the materials and labor required during the manufacturing process. The solar cell module includes a rigid front support layer formed of light transmitting material having first and second surfaces. A transparent encapsulant layer has a first surface disposed adjacent the second surface of the front support layer. A plurality of interconnected solar cells have a first surface disposed adjacent a second surface of the transparent encapsulant layer. The backskin layer is formed of a thermoplastic olefin, which includes first ionomer, a second ionomer, glass fiber, and carbon black. A first surface of the backskin layer is disposed adjacent a second surface of the interconnected solar cells. The transparent encapsulant layer and the backskin layer, in combination, encapsulate the interconnected solar cells. An end portion of the backskin layer can be wrapped around the edge of the module for contacting the first surface of the front support layer to form an edge seal.

Hanoka, Jack I. (Brookline, MA)

1998-04-21T23:59:59.000Z

25

Number  

Office of Legacy Management (LM)

' ' , /v-i 2 -i 3 -A, This dow'at consists ~f--~-_,_~~~p.~,::, Number -------of.-&--copies, 1 Series.,-a-,-. ! 1 THE UNIVERSITY OF ROCHESTER 1; r-.' L INTRAMURALCORRESPONDENCE i"ks' 3 2.. September 25, 1947 Memo.tor Dr. A. H, Dovdy . From: Dr. H. E, Stokinger Be: Trip Report - Mayvood Chemical Works A trip vas made Nednesday, August 24th vith Messrs. Robert W ilson and George Sprague to the Mayvood Chemical F!orks, Mayvood, New Jersey one of 2 plants in the U.S.A. engaged in the production of thorium compounds. The purpose of the trip vas to: l 1. Learn the type of chemical processes employed in the thorium industry (thorium nitrate). 2. Survey conditions of eeosure of personnel associated vith these chemical processes. 3. Obtain samples of atmospheric contaminants in the plant, as

26

Melatonin modulates intercellular communication among immortalized rat suprachiasmatic nucleus cells  

E-Print Network (OSTI)

and in the most appropriate temporal, phase relationships. Cell-to-cell communication is essential for conveying inputs to and outputs from the SCN. The goal of the present study was to use an immortalized neural cell line (SCN2.2), derived from the presumptive...

Cox, Kimberly Yvonne

2009-05-15T23:59:59.000Z

27

Modulating cell behavior with engineered HER-receptor ligands  

E-Print Network (OSTI)

The primary motivation for this work is the manipulation of EGFR family signaling to influence regenerative responses of mesenchymal stem cells (MSC). Underlying the potential of regenerative medicine is the need to ...

Alvarez, Luis M. (Luis Manuel)

2009-01-01T23:59:59.000Z

28

Thin film solar cell including a spatially modulated intrinsic layer  

DOE Patents (OSTI)

One or more thin film solar cells in which the intrinsic layer of substantially amorphous semiconductor alloy material thereof includes at least a first band gap portion and a narrower band gap portion. The band gap of the intrinsic layer is spatially graded through a portion of the bulk thickness, said graded portion including a region removed from the intrinsic layer-dopant layer interfaces. The band gap of the intrinsic layer is always less than the band gap of the doped layers. The gradation of the intrinsic layer is effected such that the open circuit voltage and/or the fill factor of the one or plural solar cell structure is enhanced.

Guha, Subhendu (Troy, MI); Yang, Chi-Chung (Troy, MI); Ovshinsky, Stanford R. (Bloomfield Hills, MI)

1989-03-28T23:59:59.000Z

29

14th Workshop on Crystalline Silicon Solar Cells& Modules: Materials and Processes; Summary of Discussion Sessions  

SciTech Connect

The 14th Workshop discussion sessions addressed funding needs for Si research and for R&D to enhance U.S. PV manufacturing. The wrap-up session specifically addressed topics for the new university silicon program. The theme of the workshop, Crystalline Silicon Solar Cells: Leapfrogging the Barriers, was selected to reflect the astounding progress in Si PV technology during last three decades, despite a host of barriers and bottlenecks. A combination of oral, poster, and discussion sessions addressed recent advances in crystal growth technology, new cell structures and doping methods, silicon feedstock issues, hydrogen passivation and fire through metallization, and module issues/reliability. The following oral/discussion sessions were conducted: (1) Technology Update; (2) Defects and Impurities in Si/Discussion; (3) Rump Session; (4) Module Issues and Reliability/Discussion; (5) Silicon Feedstock/Discussion; (6) Novel Doping, Cells, and Hetero-Structure Designs/Discussion; (7) Metallization/Silicon Nitride Processing/Discussion; (8) Hydrogen Passivation/Discussion; (9) Characterization/Discussion; and (10) Wrap-Up. This year's workshop lasted three and a half days and, for the first time, included a session on Si modules. A rump session was held on the evening of August 8, which addressed efficiency expectations and challenges of c Si solar cells/modules. Richard King of DOE and Daren Dance of Wright Williams& Kelly (formerly of Sematech) spoke at two of the luncheon sessions. Eleven students received Graduate Student Awards from funds contributed by the PV industry.

Sopori, B.; Tan, T.; Sinton, R.; Swanson, D.

2004-10-01T23:59:59.000Z

30

?v?6 Integrin Promotes the Invasion of Morphoeic Basal Cell Carcinoma through Stromal Modulation  

Science Journals Connector (OSTI)

...of Morphoeic Basal Cell Carcinoma through Stromal Modulation Daniel Marsh 1 Sarah Dickinson 1 Graham W. Neill 2 John F. Marshall...anti-human alphavbeta6 integrin were generously provided by Dr. S. Violette (BiogenIdec, Cambridge, MA). 53a2 rat mAb against human...

Daniel Marsh; Sarah Dickinson; Graham W. Neill; John F. Marshall; Ian R. Hart; and Gareth J. Thomas

2008-05-01T23:59:59.000Z

31

Integrating Multiple Solid Oxide Fuel Cell Modules* Burak Ozpineci1  

E-Print Network (OSTI)

than traditional generators even though they still have an important level of greenhouse gas (CO2 for more than a century. Today, as conventional fossil energy supplies, such as oil, coal and natural gas of Energy's Solid-State Energy Conversion Alliance (SECA) program [3] is targeting solid oxide fuel cell

Tolbert, Leon M.

32

Modulation and Utilization of Host Cell Phosphoinositides by Salmonella spp.  

Science Journals Connector (OSTI)

...3-phosphoinositides in the maturation of Salmonella-containing vacuoles within host cells. J. Biol. Chem. 277: 12770-12776. 44 Steele-Mortimer, O., J. H. Brumell, L. A. Knodler, S. Meresse, A. Lopez, and B. B. Finlay. 2002. The...

Dan Drecktrah; Leigh A. Knodler; Olivia Steele-Mortimer

2004-08-01T23:59:59.000Z

33

Brassinosteroid Regulates Cell Elongation by Modulating Gibberellin Metabolism in Rice  

Science Journals Connector (OSTI)

...figures in this article are displayed in color online but in black and white in the print edition. [W] Online version contains Web-only data. [OPEN] Articles can be viewed online without a subscription. Physiological BR promotes cell elongation by inducing...

Hongning Tong; Yunhua Xiao; Dapu Liu; Shaopei Gao; Linchuan Liu; Yanhai Yin; Yun Jin; Qian Qian; Chengcai Chu

2014-11-04T23:59:59.000Z

34

Industrial high performance crystalline silicon solar cells and modules based on rear surface passivation technology  

Science Journals Connector (OSTI)

Abstract Stimulated by the extreme market conditions, the increase in performance and the reduction of manufacturing costs of standard crystalline silicon solar cells and modules have been quite significant in the last years. This progress was achieved mainly by process and material improvements avoiding additional process complexity. As todays cells are predominantly limited by optical and recombination losses at the rear surface, dielectric rear surface passivation represents an obvious approach to overcome the limitations. In recent years several concepts have been developed to implement dielectric rear side passivation into industrial-scale mass production. In this paper a short review is given about the evolution of dielectric rear side passivation technologies as well as on state-of-the-art cell and module results. Simple and cost effective cell and module designs utilizing standard as well as innovative manufacturing technologies are presented. Furthermore, it is shown that for all major steps multiple process options are available to further reduce the manufacturing costs. Using an optimized emitter and screen-printed metallization on commercially available 156 mm×156 mm p-type Czochralski-grown crystalline silicon wafers best cell efficiencies of 19.9% without dielectric rear surface passivation and 21.0% with dielectric rear surface passivation are demonstrated. Replacing the screen-printed front contacts by electroplated nickel–copper contacts record efficiencies of up to 21.3% are reached. By optimizing the module design and materials to reduce the resistive and optical losses, a peak module power of up to 306 W and 19.5% aperture area efficiency are achieved.

Axel Metz; Dennis Adler; Stefan Bagus; Henry Blanke; Michael Bothar; Eva Brouwer; Stefan Dauwe; Katharina Dressler; Raimund Droessler; Tobias Droste; Markus Fiedler; Yvonne Gassenbauer; Thorsten Grahl; Norman Hermert; Wojtek Kuzminski; Agata Lachowicz; Thomas Lauinger; Norbert Lenck; Mihail Manole; Marcel Martini; Rudi Messmer; Christine Meyer; Jens Moschner; Klaus Ramspeck; Peter Roth; Ruben Schönfelder; Berthold Schum; Jörg Sticksel; Knut Vaas; Michael Volk; Klaus Wangemann

2014-01-01T23:59:59.000Z

35

FORM EIA-63B ANNUAL PHOTOVOLTAIC CELL/MODULE SHIPMENTS REPORT  

U.S. Energy Information Administration (EIA) Indexed Site

CELL/MODULE SHIPMENTS REPORT For Reporting Year ( ) OMB No. 1905-0129 Approval Expires: 12/31/2016 Burden: 5 hours GENERAL INFORMATION AND INSTRUCTIONS I. Purpose Form EIA-63B is designed to provide the data necessary for the U.S. Energy Information Administration (EIA), a part of the U.S. Department of Energy (DOE), to carry out its responsibilities tracking photovoltaic cell/module shipments in the photovoltaic industry and reporting information concerning the size and status of the industry. The data collected will be published a nnu a lly in the S o la r Phot o vo lt ai c C el l/ Mo du le Sh ip m ent s R epor t a nd be available through EIA's Internet site at http://www.eia.gov/renewable/annual/solar_photo/. II. Who Should Respond to This Survey

36

Thermal investigation of lithium-ion battery module with different cell arrangement structures and forced air-cooling strategies  

Science Journals Connector (OSTI)

Abstract Thermal management needs to be carefully considered in the lithium-ion battery module design to guarantee the temperature of batteries in operation within a narrow optimal range. This article firstly explores the thermal performance of battery module under different cell arrangement structures, which includes: 1 × 24, 3 × 8 and 5 × 5 arrays rectangular arrangement, 19 cells hexagonal arrangement and 28 cells circular arrangement. In addition, air-cooling strategies are also investigated by installing the fans in the different locations of the battery module to improve the temperature uniformity. Factors that influence the cooling capability of forced air cooling are discussed based on the simulations. The three-dimensional computational fluid dynamics (CFD) method and lumped model of single cell have been applied in the simulation. The temperature distributions of batteries are quantitatively described based on different module patterns, fan locations as well as inter-cell distance, and the conclusions are arrived as follows: when the fan locates on top of the module, the best cooling performance is achieved; the most desired structure with forced air cooling is cubic arrangement concerning the cooling effect and cost, while hexagonal structure is optimal when focus on the space utilization of battery module. Besides, the optimized inter-cell distance in battery module structure has been recommended.

Tao Wang; K.J. Tseng; Jiyun Zhao; Zhongbao Wei

2014-01-01T23:59:59.000Z

37

Uv-Light Stabilization Additive Package For Solar Cell Module And Laminated Glass Applications  

DOE Patents (OSTI)

An ultraviolet light stabilization additive package is used in an encapsulant material that may be used in solar cell modules, laminated glass and a variety of other applications. The ultraviolet light stabilization additive package comprises a first hindered amine light stabilizer and a second hindered amine light stabilizer. The first hindered amine light stabilizer provides thermal oxidative stabilization, and the second hindered amine light stabilizer providing photo-oxidative stabilization.

Hanoka, Jack I. (Brookline, MA); Klemchuk, Peter P. (Watertown, CT)

2002-03-05T23:59:59.000Z

38

Bragg cell laser intensity modulation: effect on laser Doppler velocimetry measurements  

SciTech Connect

In most laser Doppler velocimetry (LDV) systems, the frequency of one of the two laser beams that intersect to create the probe volume is shifted with an acousto-optic element. It is shown here that Bragg shifting can impose a problematic fluctuation in intensity on the frequency-shifted beam, producing spurious velocity measurements. This fluctuation occurs at twice the Bragg cell frequency, and its relative amplitude to the time average intensity is a function of the ratio of the laser beam diameter to the Bragg cell acoustic wavelength. A physical model and a configuration procedure to minimize adverse effects of the intensity modulations are presented.

Mychkovsky, Alexander G.; Chang, Natasha A.; Ceccio, Steven L.

2009-06-20T23:59:59.000Z

39

Mechanical interaction between cells and fluid for bone tissue engineering scaffold: Modulation of the interfacial shear stress  

E-Print Network (OSTI)

Mechanical interaction between cells and fluid for bone tissue engineering scaffold: Modulation Analytical solution Bone tissue engineering a b s t r a c t An analytical model of the fluid/cell mechanical n f o Article history: Accepted 1 November 2009 Keywords: Cell fluid interaction Shear stress

Guerraoui, Rachid

40

Materials and Modules for Low Cost, High Performance Fuel Cell Humidifiers  

NLE Websites -- All DOE Office Websites (Extended Search)

Kick-off Meeting, Kick-off Meeting, Wash. D.C - 10/01/2009 Materials and Modules for Low Cost, High Performance Fuel Cell Humidifiers Prime Contractor: W. L. Gore & Associates Elkton, MD Principal Investigator: William B. Johnson Sub-Contractor: dPoint Technologies Vancouver, BC W. L. Gore & Associates, Inc. DOE Kick-off Meeting, Wash. D.C - 10/01/2009 Ahluwalia, et. al, ibid. Mirza, Z. DOE Hydrogen Program Review, June 9-13, 2008; Washington, DC Background W. L. Gore & Associates, Inc. DOE Kick-off Meeting, Wash. D.C - 10/01/2009 Objective and Technical Barriers Addressed More efficient, low-cost humidifiers can increase fuel cell inlet humidity: Reduce system cost and size of balance of plant; Improve fuel cell performance; Improve fuel cell durability. OBJECTIVE: Demonstrate a durable, high performance water

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Mechanism of Recombination Losses in Bulk Heterojunction P3HT:PCBM Solar Cells Studied Using Intensity Modulated Photocurrent Spectroscopy  

Science Journals Connector (OSTI)

Mechanism of Recombination Losses in Bulk Heterojunction P3HT:PCBM Solar Cells Studied Using Intensity Modulated Photocurrent Spectroscopy ... † Department of Chemistry, The University of Western Ontario, London, Ontario N6A 5B7, Canada ...

Joshua C. Byers; Scott Ballantyne; Konstantin Rodionov; Alex Mann; O. A. Semenikhin

2011-02-07T23:59:59.000Z

42

Development of a Hybrid Compressor/Expander Module for Automotive Fuel Cell Applications  

SciTech Connect

In this program TIAX LLC conducted the development of an advanced technology compressor/expander for supplying compressed air to Proton Exchange Membrane (PEM) fuel cells in transportation applications. The overall objective of this program was to develop a hybrid compressor/expander module, based on both scroll and high-speed turbomachinery technologies, which will combine the strengths of each technology to create a concept with superior performance at minimal size and cost. The resulting system was expected to have efficiency and pressure delivery capability comparable to that of a scroll-only machine, at significantly reduced system size and weight when compared to scroll-only designs. Based on the results of detailed designs and analyses of the critical system elements, the Hybrid Compressor/Expander Module concept was projected to deliver significant improvements in weight, volume and manufacturing cost relative to previous generation systems.

McTaggart, Paul

2004-12-31T23:59:59.000Z

43

Number 23 1995 Los Alamos Science Radiation, Cell Cycle, and Cancer  

E-Print Network (OSTI)

Number 23 1995 Los Alamos Science 51 Radiation, Cell Cycle, and Cancer We have seen the enemy- derstanding of the cellular origins of many diseases, including the origins of cancer. The insights are timely. Cancer is one of the great scourges of modern civilization, for roughly one in five people

Massey, Thomas N.

44

VOLUME 6S, NUMBER 13 PHYSICAL REVIEW LETTERS Very Cold Trapped Atoms in a Vapor Cell  

E-Print Network (OSTI)

VOLUME 6S, NUMBER 13 PHYSICAL REVIEW LETTERS Very Cold Trapped Atoms in a Vapor Cell 24 SEPTEMBER sample of spin-polarized trapped atoms. The technique used dramati- cally simplifies the production of laser-cooled atoms. In this experiment, 1.8x10' neutral cesium atoms were optically captured directly

Monroe, Christopher

45

In-Line Post-Process Scribing for Reducing Cell to Module Efficiency Gap in Monolithic Thin Film Photovoltaics  

E-Print Network (OSTI)

The gap between cell and module efficiency is a major challenge for all photovoltaic (PV) technologies. For monolithic thin film PV modules, a significant fraction of this gap has been attributed to parasitic shunts, and other defects, distributed across the module. In this paper, we show that it is possible to contain or isolate these shunt defects, using the state of the art laser scribing processes, after the fabrication of the series connected module is finished. We discuss three possible alternatives, and quantify the performance gains for each technique. We demonstrate that using these techniques, it is possible to recover up to 50% of the power lost to parasitic shunts, which results in 1-2% (absolute) increase in module efficiencies for typical thin film PV technologies.

Dongaonkar, Sourabh

2013-01-01T23:59:59.000Z

46

Polymer defect states modulate open-circuit voltage in bulk-heterojunction solar cells  

SciTech Connect

Defect states influence the operation of organic solar cells altering transport, recombination, and energetic mechanisms. This work investigates how processing conditions induce morphology-related, electrically active defects in the donor polymer of bulk-heterojunction solar cells. Structural order is inferred from absorption and X-ray diffraction data, while defect density is determined from capacitance methods. A correlation is observed between the polymer nanocrystallite size, the defect concentration, and the output voltage. For the case of poly(3-hexylthiophene), processing that promote crystallinity is beneficial for the device performance as it decreases the defect density (energy disorder) that finally enlarges the maximum achievable open-circuit voltage. Defect states within the effective bandgap modulate the downshift of the hole Fermi level upon illumination that in turn establishes the achievable open-circuit voltage.

Ripolles, Teresa S.; Guerrero, Antonio; Garcia-Belmonte, Germà, E-mail: garciag@uji.es [Photovoltaic and Optoelectronic Devices Group, Departament de Física, Universitat Jaume I, ES-12071 Castelló (Spain)] [Photovoltaic and Optoelectronic Devices Group, Departament de Física, Universitat Jaume I, ES-12071 Castelló (Spain)

2013-12-09T23:59:59.000Z

47

Bacterial metabolite indole modulates incretin secretion from intestinal enteroendocrine L-cells  

E-Print Network (OSTI)

was used as a control measurement. The dish was mounted in a perfusion chamber on an Olympus IX71 microscope with x40 oil-immersion objective, and imaged using an Orca-ER CCD camera. A 75W Xenon arc lamp and a monochromator (Cairn Research) controlled... ) expressed on the plasma membrane of L-cells, enhancing L-cell number and secretion (Cani et al., 2013; Petersen et al., 2014; Plaisancie et al., 1995; Psichas et al., 2014; Tarini and Wolever, 2010; Tolhurst et al., 2012). Many other bacterial metabolites...

Chimerel, Catalin; Emery, Edward; Summers, David K.; Keyser, Ulrich; Gribble, Fiona M.; Reimann, Frank

2014-01-01T23:59:59.000Z

48

Module Configuration  

DOE Patents (OSTI)

A stand alone battery module including: (a) a mechanical configuration; (b) a thermal management configuration; (c) an electrical connection configuration; and (d) an electronics configuration. Such a module is fully interchangeable in a battery pack assembly, mechanically, from the thermal management point of view, and electrically. With the same hardware, the module can accommodate different cell sizes and, therefore, can easily have different capacities. The module structure is designed to accommodate the electronics monitoring, protection, and printed wiring assembly boards (PWAs), as well as to allow airflow through the module. A plurality of modules may easily be connected together to form a battery pack. The parts of the module are designed to facilitate their manufacture and assembly.

Oweis, Salah (Ellicott City, MD); D'Ussel, Louis (Bordeaux, FR); Chagnon, Guy (Cockeysville, MD); Zuhowski, Michael (Annapolis, MD); Sack, Tim (Cockeysville, MD); Laucournet, Gaullume (Paris, FR); Jackson, Edward J. (Taneytown, MD)

2002-06-04T23:59:59.000Z

49

Modulation of ATP/ADP Concentration at the Endothelial Cell Surface by Flow: Effect of Cell Topography  

E-Print Network (OSTI)

Wall shear stress modulation of ATP/ADP concentration at theFlow modulation of agonist (ATP)-response (Ca 2+ ) couplingJ. Ando. Endogenously released ATP mediates shear stress-

Choi, Hyo Won; Barakat, Abdul I.

2009-01-01T23:59:59.000Z

50

Immunosuppressive dietary n-3 polyunsaturated fatty acids differentially modulate costimulatory regulation of murine CD4+ T-cell function  

E-Print Network (OSTI)

anti-inflammatory mechanism of n-3 PUFA. Eicosanoids are a group of chemical messengers that act within the immune system to modulate the intensity and duration of inflammatory responses (reviewed in (23-25)). For example, prostaglandin E2 (PGE2... express a T-cell receptor (TCR) associated with a complex of transmembrane signaling proteins called CD3 (35). Cell- mediated immunity is the effector function of T-lymphocytes, which serves as an important defense mechanism against many microbes...

Ly, Lan H.

2005-02-17T23:59:59.000Z

51

15th Workshop on Crystalline Silicon Solar Cells and Modules: Materials and Processes; Extended Abstracts and Papers  

SciTech Connect

The National Center for Photovoltaics sponsored the 15th Workshop on Crystalline Silicon Solar Cells & Modules: Materials and Processes, held in Vail, CO, August 7-10, 2005. This meeting provided a forum for an informal exchange of technical and scientific information between international researchers in the photovoltaic and relevant non-photovoltaic fields. The workshop addressed the fundamental properties of PV silicon, new solar cell designs, and advanced solar cell processing techniques. A combination of oral presentations by invited speakers, poster sessions, and discussion sessions reviewed recent advances in crystal growth, new cell designs, new processes and process characterization techniques, and cell fabrication approaches suitable for future manufacturing demands. The theme of this year's meeting was 'Providing the Scientific Basis for Industrial Success.' Specific sessions during the workshop included: Advances in crystal growth and material issues; Impurities and defects in Si; Advanced processing; High-efficiency Si solar cells; Thin Si solar cells; and Cell design for efficiency and reliability module operation. The topic for the Rump Session was ''Si Feedstock: The Show Stopper'' and featured a panel discussion by representatives from various PV companies.

Sopori, B. L.

2005-11-01T23:59:59.000Z

52

Combined experimental and numerical study of thermal management of battery module consisting of multiple Li-ion cells  

Science Journals Connector (OSTI)

Abstract Lithium ion (Li-ion) batteries are promising power sources for hybrid powertrain systems, and the thermal management of batteries has been identified as a critical issue both for safety and efficiency concerns. This work studied thermal management of a Li-ion battery module both experimentally and computationally. A battery module consisting of multiple cells was fabricated and experimentally tested in a wind tunnel facility. Systematic tests were performed under various flow velocities, charging and discharging current, and module configuration. Computationally, a high-fidelity two dimensional computational fluid dynamics (CFD) model was developed to capture the detailed dynamics of thermal management of the cells. Temperature rise of cells and pressure measurements were recorded in the experiments, and compared with CFD model simulations. Reasonable agreement was obtained, confirming the validity of the model. The validated model was then applied to study the power consumption required by the thermal management system. The results obtained in this combined experimental and numerical study are expected to be valuable for the optimized design of battery modules and the development of reduced-order models.

Fan He; Xuesong Li; Lin Ma

2014-01-01T23:59:59.000Z

53

Pericyte actomyosin-mediated contraction at the cell-material interface can modulate the microvascular niche  

E-Print Network (OSTI)

Pericytes physically surround the capillary endothelium, contacting and communicating with associated vascular endothelial cells via cell–cell and cell–matrix contacts. Pericyte–endothelial cell interactions thus have the ...

Lee, Sunyoung

54

16th Workshop on Crystalline Silicon Solar Cells and Modules: Materials and Processes; Program, Extended Abstracts, and Papers  

SciTech Connect

The National Center for Photovoltaics sponsored the 16th Workshop on Crystalline Silicon Solar Cells and Modules: Materials and Processes held August 6-9, 2006 in Denver, Colorado. The workshop addressed the fundamental properties of PV-Si, new solar cell designs, and advanced solar cell processing techniques. It provided a forum for an informal exchange of technical and scientific information between international researchers in the photovoltaic and relevant non-photovoltaic fields. The Workshop Theme was: "Getting more (Watts) for Less ($i)". A combination of oral presentations by invited speakers, poster sessions, and discussion sessions reviewed recent advances in crystal growth, new cell structures, new processes and process characterization techniques, and cell fabrication approaches suitable for future manufacturing demands. The special sessions included: Feedstock Issues: Si Refining and Purification; Metal-impurity Engineering; Thin Film Si; and Diagnostic Techniques.

Sopori, B. L.

2006-08-01T23:59:59.000Z

55

Multi-processor including data flow accelerator module  

DOE Patents (OSTI)

An accelerator module for a data flow computer includes an intelligent memory. The module is added to a multiprocessor arrangement and uses a shared tagged memory architecture in the data flow computer. The intelligent memory module assigns locations for holding data values in correspondence with arcs leading to a node in a data dependency graph. Each primitive computation is associated with a corresponding memory cell, including a number of slots for operands needed to execute a primitive computation, a primitive identifying pointer, and linking slots for distributing the result of the cell computation to other cells requiring that result as an operand. Circuitry is provided for utilizing tag bits to determine automatically when all operands required by a processor are available and for scheduling the primitive for execution in a queue. Each memory cell of the module may be associated with any of the primitives, and the particular primitive to be executed by the processor associated with the cell is identified by providing an index, such as the cell number for the primitive, to the primitive lookup table of starting addresses. The module thus serves to perform functions previously performed by a number of sections of data flow architectures and coexists with conventional shared memory therein. A multiprocessing system including the module operates in a hybrid mode, wherein the same processing modules are used to perform some processing in a sequential mode, under immediate control of an operating system, while performing other processing in a data flow mode.

Davidson, George S. (Albuquerque, NM); Pierce, Paul E. (Albuquerque, NM)

1990-01-01T23:59:59.000Z

56

Mass Production of Large-Area Integrated Thin-Film Silicon Solar-Cell Module  

Science Journals Connector (OSTI)

A mass-production technology of a-Si single junction modules with stable 8% efficiency had been developed in the Shiga factory of the Kaneka Corporation. In 1999, Kaneka instituted Kaneka Solartech Corporation...

Yoshihisa Tawada; H. Yamagishi; K. Yamamoto

2004-01-01T23:59:59.000Z

57

Origin of Tumor Recurrence After Intensity Modulated Radiation Therapy for Oropharyngeal Squamous Cell Carcinoma  

SciTech Connect

Purpose: To model locoregional recurrences of oropharyngeal squamous cell carcinomas (OSCC) treated with primary intensity modulated radiation therapy (IMRT) in order to find the origins from which recurrences grow and relate their location to original target volume borders. Methods and Materials: This was a retrospective analysis of OSCC treated with primary IMRT between January 2002 and December 2009. Locoregional recurrence volumes were delineated on diagnostic scans and coregistered rigidly with treatment planning computed tomography scans. Each recurrence was analyzed with two methods. First, overlapping volumes of a recurrence and original target were measured ('volumetric approach') and assessed as 'in-field', 'marginal', or 'out-field'. Then, the center of mass (COM) of a recurrence volume was assumed as the origin from where a recurrence expanded, the COM location was compared with original target volume borders and assessed as 'in-field', 'marginal', or 'out-field'. Results: One hundred thirty-one OSCC were assessed. For all patients alive at the end of follow-up, the mean follow-up time was 40 months (range, 12-83 months); 2 patients were lost to follow-up. The locoregional recurrence rate was 27%. Of all recurrences, 51% were local, 23% were regional, and 26% had both local and regional recurrences. Of all recurrences, 74% had imaging available for assessment. Regarding volumetric analysis of local recurrences, 15% were in-field gross tumor volume (GTV), and 65% were in-field clinical tumor volume (CTV). Using the COM approach, we found that 70% of local recurrences were in-field GTV and 90% were in-field CTV. Of the regional recurrences, 25% were volumetrically in-field GTV, and using the COM approach, we found 54% were in-field GTV. The COM of local out-field CTV recurrences were maximally 16 mm outside CTV borders, whereas for regional recurrences, this was 17 mm. Conclusions: The COM model is practical and specific for recurrence assessment. Most recurrences originated in the GTV. This suggests radioresistance in certain tumor parts.

Raktoe, Sawan A.S. [Department of Radiotherapy, University Medical Center Utrecht, Utrecht (Netherlands)] [Department of Radiotherapy, University Medical Center Utrecht, Utrecht (Netherlands); Dehnad, Homan, E-mail: h.dehnad@umcutrecht.nl [Department of Radiotherapy, University Medical Center Utrecht, Utrecht (Netherlands)] [Department of Radiotherapy, University Medical Center Utrecht, Utrecht (Netherlands); Raaijmakers, Cornelis P.J. [Department of Radiotherapy, University Medical Center Utrecht, Utrecht (Netherlands)] [Department of Radiotherapy, University Medical Center Utrecht, Utrecht (Netherlands); Braunius, Weibel [Department of ENT Head and Neck Surgery, University Medical Center Utrecht, Utrecht (Netherlands)] [Department of ENT Head and Neck Surgery, University Medical Center Utrecht, Utrecht (Netherlands); Terhaard, Chris H.J. [Department of Radiotherapy, University Medical Center Utrecht, Utrecht (Netherlands)] [Department of Radiotherapy, University Medical Center Utrecht, Utrecht (Netherlands)

2013-01-01T23:59:59.000Z

58

Inverted Metamorphic Cell Development: Cooperative Research and Development Final Report, CRADA Number CRD-05-156  

SciTech Connect

This CRADA targeted technology transfer of the inverted metamorphic multi-junction (IMM) solar cell innovation from NREL to Emcore Photovoltaics. The technology transfer was successfully completed. Additionally, NREL provided materials characterization of solar cell structures produced at Emcore.

Wanlass, M.

2012-05-01T23:59:59.000Z

59

Long-range, full-duplex, modulated-reflector cell phone for voice/data transmission  

DOE Patents (OSTI)

A long-range communications apparatus utilizing modulated-reflector technology is described. The apparatus includes an energy-transmitting base station and remote units that do not emit radiation in order to communicate with the base station since modulated-reflector technology is used whereby information is attached to an RF carrier wave originating from the base station which is reflected by the remote unit back to the base station. Since the remote unit does not emit radiation, only a low-power power source is required for its operation. Information from the base station is transmitted to the remote unit using a transmitter and receiver, respectively. The range of such a communications system is determined by the properties of a modulated-reflector half-duplex link.

Neagley, Daniel L. (Albuquerque, NM); Briles, Scott D. (Los Alamos, NM); Coates, Don M. (Santa Fe, NM); Freund, Samuel M. (Los Alamos, NM)

2002-01-01T23:59:59.000Z

60

Materials and Modules for Low Cost, High Performance Fuel Cell Humidifiers  

Energy.gov (U.S. Department of Energy (DOE))

Presented at the Department of Energy Fuel Cell Projects Kickoff Meeting, September 1 – October 1, 2009

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Cell number regulator genes in Prunus provide candidate genes for the control of fruit size in sweet and sour cherry  

E-Print Network (OSTI)

Cell number regulator genes in Prunus provide candidate genes for the control of fruit size at Springerlink.com Abstract Striking increases in fruit size distinguish cultivated descendants from small-fruited wild progen- itors for fleshy fruited species such as Solanum lycopersicum (tomato) and Prunus spp

van der Knaap, Esther

62

The Herpes Simplex Virus Type 1 UL20 Protein Modulates Membrane Fusion Events during Cytoplasmic Virion Morphogenesis and Virus-Induced Cell Fusion  

Science Journals Connector (OSTI)

...Herpes Simplex Virus Type 1 UL20 Protein Modulates Membrane Fusion Events during Cytoplasmic...that affect cell fusion in herpes simplex virus type 1. Virology 132...virus-induced cell fusion. | The herpes simplex virus type 1 (HSV-1) UL20...

Timothy P. Foster; Jeffrey M. Melancon; Joel D. Baines; Konstantin G. Kousoulas

2004-05-01T23:59:59.000Z

63

Increased BPA Production Modulates EPO Sensitivity of Circulating BFU-E in Sickle Cell Anemia  

Science Journals Connector (OSTI)

We have examined the possibility that permanent “stress” hemopoiesis in sickle cell anemia (SS) patients leads to the modification of the behavior of circulating 14 day erythroid progenitor cells (BFU-E). In thes...

Helena Croizat; Ronald L. Nagel

1988-01-01T23:59:59.000Z

64

Sensitivity of Hamster Tracheal Epithelial Cells to Asbestiform Minerals Modulated by Serum and by Transforming Growth Factor ?  

Science Journals Connector (OSTI)

...magnesium-free phosphate buffered saline; CFE, colony forming efficiency; NHBE, normal...the duration of the assay(s). Assay of CFE. Responses to agents were measured using...number of cells plated was calculated as the CFE. Results, expressed as the relative survival...

Ann Marie Sesko and Brooke T. Mossman

1989-05-15T23:59:59.000Z

65

Seasonal dynamics of cell numbers and biodiversity of marine heterotrophic bacteria inhabiting invertebrates and water ecosystems of the Peter the Great Bay, Sea of Japan  

Science Journals Connector (OSTI)

The annual changes in bacterial numbers and diversity of the heterotrophic microflora in invertebrates and ambient water were studied. During the whole period of observation, bacterial cell numbers were higher...

I. A. Beleneva; N. V. Zhukova

2009-06-01T23:59:59.000Z

66

Modulation of redox status and calcium handling by extremely low frequency electromagnetic fields in C2C12 muscle cells: A real-time, single-cell approach  

Science Journals Connector (OSTI)

The biological effects of electric and magnetic fields, which are ubiquitous in modern society, remain poorly understood. Here, we applied a single-cell approach to study the effects of short-term exposure to extremely low frequency electromagnetic fields (ELF-EMFs) on muscle cell differentiation and function using C2C12 cells as an in vitro model of the skeletal muscle phenotype. Our focus was on markers of oxidative stress and calcium (Ca2+) handling, two interrelated cellular processes previously shown to be affected by such radiation in other cell models. Collectively, our data reveal that ELF-EMFs (1) induced reactive oxygen species production in myoblasts and myotubes with a concomitant decrease in mitochondrial membrane potential; (2) activated the cellular detoxification system, increasing catalase and glutathione peroxidase activities; and (3) altered intracellular Ca2+homeostasis, increasing the spontaneous activity of myotubes and enhancing cellular reactivity to a depolarizing agent (KCl) or an agonist (caffeine) of intracellular store Ca2+channels. In conclusion, our data support a possible link between exposure to ELF-EMFs and modification of the cellular redox state, which could, in turn, increase the level of intracellular Ca2+and thus modulate the metabolic activity of C2C12 cells.

Caterina Morabito; Francesca Rovetta; Mariano Bizzarri; Giovanna Mazzoleni; Giorgio Fanò; Maria A. Mariggiò

2010-01-01T23:59:59.000Z

67

Musashi2 modulates K562 leukemic cell proliferation and apoptosis involving the MAPK pathway  

SciTech Connect

The RNA-binding protein Musashi2 (Msi2) has been identified as a master regulator within a variety of stem cell populations via the regulation of translational gene expression. A recent study has suggested that Msi2 is strongly expressed in leukemic cells of acute myeloid leukemia patients, and elevated Msi2 is associated with poor prognosis. However, the potential role of Msi2 in leukemogenesis is still not well understood. Here, we investigated the effect of Msi2 knockdown on the biological properties of leukemic cells. High expression of Msi2 was found in K562 and KG-1a leukemic cell lines, and low expression was observed in the U937 cell line. We transduced K562 cells with two independent adenoviral shRNA vectors targeting Msi2 and confirmed knockdown of Msi2 at the mRNA and protein levels. Msi2 silencing inhibited cell growth and caused cell cycle arrest by increasing the expression of p21 and decreasing the expression of cyclin D1 and cdk2. In addition, knockdown of Msi2 promoted cellular apoptosis via the upregulation of Bax and downregulation of Bcl-2 expression. Furthermore, Msi2 knockdown resulted in the inactivation of the ERK/MAPK and p38/MAPK pathways, but no remarkable change in p-AKT was observed. These data provide evidence that Msi2 plays an important role in leukemogenesis involving the MAPK signaling pathway, which indicates that Msi2 may be a novel target for leukemia treatment. - Highlights: • Knockdown of Msi2 inhibited K562 cell growth and arrested cell cycle progression. • Knockdown of Msi2 induced K562 cell apoptosis via the regulation of Bax and Bcl-2. • The MAPK pathway was involved in the process of Msi2-mediated leukemogenesis. • Our data indicate that Msi2 is a potential new target for leukemia treatment.

Zhang, Huijuan; Tan, Shi; Wang, Juan; Chen, Shana; Quan, Jing; Xian, Jingrong; Zhang, Shuai shuai; He, Jingang; Zhang, Ling, E-mail: lingzhang@cqmu.edu.cn

2014-01-01T23:59:59.000Z

68

Ebola Virus Glycoproteins Induce Global Surface Protein Down-Modulation and Loss of Cell Adherence  

Science Journals Connector (OSTI)

ARTICLE PATHOGENESIS AND IMMUNITY Ebola Virus Glycoproteins Induce Global Surface...Philadelphia, Pennsylvania 19104-6076 The Ebola virus envelope glycoprotein (GP) derived...rounding and detachment in 293T cells, Ebola virus GP did not cause an increase in cell...

Graham Simmons; Rouven J. Wool-Lewis; Frédéric Baribaud; Robert C. Netter; Paul Bates

2002-03-01T23:59:59.000Z

69

Modulation of PPAR? and PPAR? by ethanol in human breast cancer cell lines  

Science Journals Connector (OSTI)

...Long-term exposure of breast cell lines to ethanol affects the transcriptional signature...mammospheres. Here we aimed to determine whether ethanol, or its metabolite, acetaldehyde, stimulate...cell lines were incubated +/- 25 mM ethanol and subjected to DNA microarray analysis...

Nagaraj Gopisetty Venkata; Peter Cabot; Greg Monteith; Sarah Roberts-Thomson

2007-05-01T23:59:59.000Z

70

Modulation of purified murine T cell subset activation by dietary n-3 Polyunsaturated fatty acids  

E-Print Network (OSTI)

-mediated events. In the whole T cell study, female C57BL/6 mice were fed one of three diets, that varied by lipid composition only, containing either arachidonic acid (AA), fish oil (FO), or docosahexaenoic acid (DHA) for 14 d. Splenic T cells (~90% purity...

Arrington, Jennifer L

2012-06-07T23:59:59.000Z

71

RESEARCH PAPER New Biotechnology Volume 28, Number 3 April 2011 Cell-free expression and labeling  

E-Print Network (OSTI)

, Cell-Free Expression (CFE) is becoming an affordable technique for a protein biochem- istry laboratory. Although SSNMR and CFE are entering the stan- dard toolbox of the structural biologist, both techniques are still confronted with specific bottlenecks when tackling membrane proteins. We believe that CFE

72

Herbal Formula-3 inhibits food allergy in rats by stabilizing mast cells through modulating calcium mobilization  

Science Journals Connector (OSTI)

AbstractBackground The prevalence of food allergy has increased dramatically during the last three decades, but currently there was no effective therapy except avoidance of allergen. This study aimed to investigate the effect of a modified Chinese herbal formula, Formula-3, on mast cell degranulation and the anti-allergic activity in both animal and cell models. Methods With OVA-sensitized food allergic model in Brown–Norway rats, we checked tissue injury in the small intestines by H&E staining. The Th2 cytokine levels and IgE production in serum or supernatant of the intestinal mucosa homogenates were analyzed by ELISA. Meanwhile, rat peritoneal mast cell activation and degranulation were examined by Toluidine Blue Stain and the release of histamine was measured. Furthermore, the regulation of Formula-3 on Ca2 + mobilization was investigated by probing intracellular Ca2 + with fluo-4 fluorescence. The direct effect of Formula-3 on mast cell stabilization was also studied in RBL-2H3 cell line. Results In vivo Formula-3 administration significantly reduced tissue damage in the small intestines of rat and suppressed Th2 cytokine secretion and IgE production. We demonstrated that Formula-3 treatment significantly suppressed Fc?R1-mediated mast cell degranulation no matter in OVA-challenged allergic rats or IgE-sensitized RBL-2H3 cell line. Furthermore, Formula-3 significantly decreased Ca2 + influx through store-operated calcium channels (SOCs) evoked by dinitrophenyl-BSA or thapsigargin in mast cells. Conclusion Taken together, our data indicate that Formula-3 stabilizes mast cells by suppressing Fc?R1-induced Ca2 + mobilization mainly through inhibiting Ca2 + entry via SOCs, thus exerting a protective effect against OVA-sensitized food allergy.

Bo Yang; Jianjie Li; Xiaoyu Liu; Li Ma; Li Deng; Jie Liu; Zhigang Liu; Qiongmei Ji

2013-01-01T23:59:59.000Z

73

MicroRNAs Regulate Tumor Angiogenesis Modulated by Endothelial Progenitor Cells  

Science Journals Connector (OSTI)

...Cancer Research (AIRC: IG11673), CARIPLO Foundation (Grant Number 2010-0744), the CRIBI center for high performance computing resources funded by the Regione Veneto (RISIB project SMUPR n. 4145), and grants from Regione Lombardia...

Prue N. Plummer; Ruth Freeman; Ryan J. Taft; Jelena Vider; Michael Sax; Brittany A. Umer; Dingcheng Gao; Christopher Johns; John S. Mattick; Stephen D. Wilton; Vito Ferro; Nigel A.J. McMillan; Alexander Swarbrick; Vivek Mittal; Albert S. Mellick

2013-01-01T23:59:59.000Z

74

E-Print Network 3.0 - aldosterone modulates cell Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

2002 Elsevier Science Inc. All rights reserved. Summary: . J. Cell. Biol. 83, 16- 32. Farman, N., Bonvalet, J.P., Secki, J.R., 1994. Aldosterone selectively... gland epithelial...

75

High Volume Manufacturing of Silicon-Film Solar Cells and Modules; Final Subcontract Report, 26 February 2003 - 30 September 2003  

SciTech Connect

The objective of the PV Manufacturing R&D subcontract was to continue to improve AstroPower's technology for manufacturing Silicon-Film* wafers, solar cells, and modules to reduce costs, and increase production yield, throughput, and capacity. As part of the effort, new technology such as the continuous back metallization screen-printing system and the laser scribing system were developed and implemented. Existing processes, such as the silicon nitride antireflection coating system and the fire-through process were optimized. Improvements were made to the statistical process control (SPC) systems of the major manufacturing processes: feedstock preparation, wafer growth, surface etch, diffusion, and the antireflection coating process. These process improvements and improved process control have led to an increase of 5% relative power, and nearly 15% relative improvement in mechanical and visual yield.

Rand, J. A.; Culik, J. S.

2005-10-01T23:59:59.000Z

76

Integrated Module Heat Exchanger | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Module Heat Exchanger Integrated Module Heat Exchanger 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting...

77

Modulation of the Cell Cycle of Cultured Mouse Liver Cells by Benzo(a)pyrene and Its Derivatives  

Science Journals Connector (OSTI)

...FCM DNA histograms and the doubling times (2) and assumes that all cells are cycling. CMean S.D. (Diol-Epoxide)-(DMSC(Diol-E@oxide)-VMS0) 0 @ -I0 0 poration into the DNA during 15-mm pulses to logarithmically growing cultures. Chart...

James C. Bartholomew; Andrew L. Pearlman; Joseph R. Landolph; Kenneth Straub

1979-07-01T23:59:59.000Z

78

Modulation of the Cell Cycle of Cultured Mouse Liver Cells by Benzo(a)pyrene and Its Derivatives  

Science Journals Connector (OSTI)

...this data analysis technique was within experimental error of standard autoradiography techniques for estimating the proportion of...all cells are cycling. CMean S.D. (Diol-Epoxide)-(DMSC(Diol-E@oxide)-VMS0) 0 @ -I0 0 poration into the DNA...

James C. Bartholomew; Andrew L. Pearlman; Joseph R. Landolph; and Kenneth Straub

1979-07-01T23:59:59.000Z

79

Technology Development for High-Efficiency Solar Cells and Modules Using Thin (<80 um) Single-Crystal Silicon Wafers Produced by Epitaxy: June 11, 2011 - April 30, 2013  

SciTech Connect

Final technical progress report of Crystal Solar subcontract NEU-31-40054-01. The objective of this 18-month program was to demonstrate the viability of high-efficiency thin (less than 80 um) monocrystalline silicon (Si) solar cells and modules with a low-cost epitaxial growth process.

Ravi, T. S.

2013-05-01T23:59:59.000Z

80

Modulation of Immune Responses to Mycobacterium bovis in Cattle Depleted of WC1+ ?? T Cells  

Science Journals Connector (OSTI)

...depletion of WC1 T cells following administration of CC15 MAb resulted in an enhanced...Phenotype analysis of PBMC following administration of CC15 or AV37 MAba Day % Gated PBMC...J. Ivanyi, J. J. Fournie, M. Bonneville, M. A. Peyrat, G. Sireci, and...

Hilary E. Kennedy; Michael D. Welsh; David G. Bryson; Joseph P. Cassidy; Fiona I. Forster; Christopher J. Howard; Robert A. Collins; John M. Pollock

2002-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Chapter III-2: Standards, Calibration and Testing of PV Modules and Solar Cells  

SciTech Connect

This chapter covers common PV measurement techniques and shows how potential problems and sources of error are minimized through the development and use of common standards. Measurement uncertainty, however, remains a problem for some types of PV cells, and tests continue to be developed to address these issues.

Osterwald, C. R.

2012-01-01T23:59:59.000Z

82

Delphinidin inhibits cell proliferation and invasion via modulation of Met receptor phosphorylation  

SciTech Connect

The HGF/Met signaling pathway is deregulated in majority of cancers and is associated with poor prognosis in breast cancer. Delphinidin, present in pigmented fruits and vegetables possesses potent anti-oxidant, anti-inflammatory and anti-angiogenic properties. Here, we assessed the anti-proliferative and anti-invasive effects of delphinidin on HGF-mediated responses in the immortalized MCF-10A breast cell line. Treatment of cells with delphinidin prior to exposure to exogenous HGF resulted in the inhibition of HGF-mediated (i) tyrosyl-phosphorylation and increased expression of Met receptor, (ii) phosphorylation of downstream regulators such as FAK and Src and (iii) induction of adaptor proteins including paxillin, Gab-1 and GRB-2. In addition, delphinidin treatment resulted in significant inhibition of HGF-activated (i) Ras-ERK MAPKs and (ii) PI3K/AKT/mTOR/p70S6K pathways. Delphinidin was found to repress HGF-activated NF{kappa}B transcription with a decrease in (i) phosphorylation of IKK{alpha}/{beta} and I{kappa}B{alpha}, and (ii) activation and nuclear translocation of NF{kappa}B/p65. Inhibition of HGF-mediated membrane translocation of PKC{alpha} as well as decreased phosphorylation of STAT3 was further observed in delphinidin treated cells. Finally, decreased cell viability of Met receptor expressing breast cancer cells treated with delphinidin argues for a potential role of the agent in the prevention of HGF-mediated activation of various signaling pathways implicated in breast cancer.

Syed, Deeba N.; Afaq, Farrukh; Sarfaraz, Sami; Khan, Naghma; Kedlaya, Rajendra; Setaluri, Vijayasaradhi [Department of Dermatology, University of Wisconsin, Madison (United States); Mukhtar, Hasan [Department of Dermatology, University of Wisconsin, Madison (United States)], E-mail: hmukhtar@wisc.edu

2008-08-15T23:59:59.000Z

83

The Rockefeller University Press, 0021-9525/2000/09/1125/11 $5.00 The Journal of Cell Biology, Volume 150, Number 5, September 4, 2000 11251135  

E-Print Network (OSTI)

© The Rockefeller University Press, 0021-9525/2000/09/1125/11 $5.00 The Journal of Cell Biology, it is not known whether the C2B domain also functions as a Ca2 -sensing module. Here, we report that Ca2 drives., 1996; Perisic et al., 1998; Ubach et al., 1998a,b; Pratt et al., 1999; Macedo-Ribeiro et al., 1999). Ca

Kemnitz, Joseph

84

Photovoltaic concentrator module improvements study  

SciTech Connect

This report presents results of a project to design and fabricate an improved photovoltaic concentrator module. Using previous work as a baseline, this study conducted analyses and testing to select major module components and design features. The lens parquet and concentrator solar cell were selected from the highest performing, available components. A single 185X point-focus module was fabricated by the project team and tested at Sandia. Major module characteristics include a 6 by 4 compression-molded acrylic lens parquet (0.737 m{sup 2} area), twenty-four 0.2 ohms-cm, FZ, p-Si solar cells (1.56 cm{sup 2} area) soldered to ceramic substrates and copper heat spreaders, and an aluminized steel housing with corrugated bottom. This project marked the first attempt to use prismatic covers on solar cells in a high-concentration, point-focus application. Cells with 15 percent metallization were obtained, but problems with the fabrication and placement of prismatic covers on these cells lead to the decision not to use covers in the prototype module. Cell assembly fabrication, module fabrication, and module optical design activities are presented here. Test results are also presented for bare cells, cell assemblies, and module. At operating conditions of 981 watts/m{sup 2} DNI and an estimated cell temperature of 65{degrees}C, the module demonstrated an efficiency of 13.9 percent prior to stressed environmental exposure. 12 refs., 56 figs., 7 tabs.

Levy, S.L.; Kerschen, K.A. (Black and Veatch, Kansas City, MO (United States)); Hutchison, G. (Solar Kinetics, Inc., Dallas, TX (United States)); Nowlan, M.J. (Spire Corp., Bedford, MA (United States))

1991-08-01T23:59:59.000Z

85

n-3 Polyunsaturated Fatty Acids Suppress Mitochondrial Translocation to the Immunological Synapse and Modulate Calcium Signaling in T Cells  

E-Print Network (OSTI)

T helper (Th) cell activation is necessary for the adaptive immune response. Formation of an immunological synapse (IS) between Th cells and antigen-presenting cells is the first step in Th cell activation. In vitro studies indicate that formation...

Yog, Rajeshwari

2011-02-22T23:59:59.000Z

86

n-3 PUFA and Curcumin Modulate the Resolution of Murine Intestinal Inflammtion  

E-Print Network (OSTI)

, and macrophage cell numbers in the colon. The ability of n-3 PUFA to favorably modulate the resolution of intestinal inflammation in fat-1 mice was linked to an enhancement (P < 0.05) in the percentage of colonic lamina propria (cLP) CD4 FoxP3 cells and a...

Jia, Qian 1980-

2011-07-30T23:59:59.000Z

87

PDSF Modules  

NLE Websites -- All DOE Office Websites (Extended Search)

Modules Modules Modules Modules Approach to Managing The Environment Modules is a system which you can use to specify what software you want to use. If you want to use a particular software package loading its module will take care of the details of modifying your environment as necessary. The advantage of the modules approach is that the you are not required to explicitly specify paths for different executable versions and try to keep their related man paths and environment variables coordinated. Instead you simply "load" and "unload" specific modules to control your environment. Getting Started with Modules If you're using the standard startup files on PDSF then you're already setup for using modules. If the "module" command is not available, please

88

NAME: STUDENT NUMBER (PID): CITY, STATE ZIP: DAYTIME PHONE NUMBER  

E-Print Network (OSTI)

NAME: STUDENT NUMBER (PID): ADDRESS: CITY, STATE ZIP: DAYTIME PHONE NUMBER: CELL PHONE NUMBER of financial institution. 14 Cell Phone Expenses 15 Other ordinary and necessary living expenses. 16 TOTAL (add

89

Development of Advanced CdTe Solar Cells Based on High Temperature Corning Glass Substrates: Cooperative Research and Development Final Report, CRADA Number CRD-10-373  

SciTech Connect

NREL has developed advanced processes for CdTe solar cells, but because of the temperature limitations of conventional soda lime glass, many of these processes have not been transferred to manufacturing. Corning is developing high temperature substrate glasses that are believed to be manufacturable and will lead to lower $/watt modules costs. The purpose of this CRADA is to evaluate these glasses in the advanced NREL processes. In addition, the CRADA seeks to develop manufacturable processes for transparent conductive oxide layers based on cadmium stannate.

Barnes, T.

2013-08-01T23:59:59.000Z

90

nature medicine volume 18 | number 4 | april 2012 475 Microfluidic chips promise better diagnosis for sickle cell disease  

E-Print Network (OSTI)

diagnosis for sickle cell disease As part of routine newborn screening programs, babies are checked for signs of the debilitating blood disease sickle cell anemia. Existing blood tests can accurately diagnose predict the likelihood of clot formation, a dangerous complication of sickle cell disease. In one design

Bhatia, Sangeeta

91

Residential Demand Module  

Gasoline and Diesel Fuel Update (EIA)

2 2 Residential Demand Module The NEMS Residential Demand Module projects future residential sector energy requirements based on projections of the number of households and the stock, efficiency, and intensity of energy-consuming equipment. The Residential Demand Module projections begin with a base year estimate of the housing stock, the types and numbers of energy-consuming appliances servicing the stock, and the "unit energy consumption" (UEC) by appliance (in million Btu per household per year). The projection process adds new housing units to the stock, determines the equipment installed in new units, retires existing housing units, and retires and replaces appliances. The primary exogenous drivers for the module are housing starts by type

92

EXPERIENCES ON PID TESTING OF PV MODULES IN 2012 | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Glass Potential Induced Degradation (PID) Tests for Commercially Available PV Modules Characterization of Dynamic Loads on Solar Modules with Respect to Fracture of Solar Cells...

93

Characterization of Dynamic Loads on Solar Modules with Respect...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Characterization of Dynamic Loads on Solar Modules with Respect to Fracture of Solar Cells Characterization of Dynamic Loads on Solar Modules with Respect to Fracture of Solar...

94

Film Si Solar Cells with Nano Si: Cooperative Research and Development Final Report, CRADA Number CRD-09-00356  

SciTech Connect

Nevada Nanotechnology Center and Si group at NREL will work together to develop a-Si based solar cells with nano-Si technique. We will explore the existing a-Si based film solar cell technology at NREL and nano scale Si technology at Nevada Nanotechnology Center. By exchanging information, we will come; up with some new cell structures using nano-Si. We expect the new a-Si based cells will have optical enhancement or better electronic or optical properties of absorber layer to improve solar cell performance.

Wang, Q.

2011-05-01T23:59:59.000Z

95

Stochastic model for computer simulation of the number of cancer cells and lymphocytes in homogeneous sections of cancer tumors  

E-Print Network (OSTI)

We deal with a small enough tumor section to consider it homogeneous, such that populations of lymphocytes and cancer cells are independent of spatial coordinates. A stochastic model based in one step processes is developed to take into account natural birth and death rates. Other rates are also introduced to consider medical treatment: natural birth rate of lymphocytes and cancer cells; induced death rate of cancer cells due to self-competition, and other ones caused by the activated lymphocytes acting on cancer cells. Additionally, a death rate of cancer cells due to induced apoptosis is considered. Weakness due to the advance of sickness is considered by introducing a lymphocytes death rate proportional to proliferation of cancer cells. Simulation is developed considering different combinations of the parameters and its values, so that several strategies are taken into account to study the effect of anti-angiogenic drugs as well the self-competition between cancer cells. Immune response, with the presence ...

Castellanos-Moreno, Arnulfo; Corella-Madueño, Adalberto; Gutiérrez-López, Sergio; Rosas-Burgos, Rodrigo

2014-01-01T23:59:59.000Z

96

The Rockefeller University Press, 0021-9525/2000/03/871/12 $5.00 The Journal of Cell Biology, Volume 148, Number 5, March 6, 2000 871882  

E-Print Network (OSTI)

© The Rockefeller University Press, 0021-9525/2000/03/871/12 $5.00 The Journal of Cell Biology, Volume 148, Number 5, March 6, 2000 871­882 http://www.jcb.org 871 MAD3 Encodes a Novel Component

Murray, Andrew W.

97

Co-Culture of Equine Mesenchymal Stem Cells with Synoviocytes to Modulate Induced Inflammation In-Vitro  

E-Print Network (OSTI)

Stem Cells (MSC). MSCs have demonstrated multiple therapeutic uses due to their abilities to both induce tissue regeneration in mutiple mesoderm derived cell lineages, as well as respond to and mediate cellular activity in their local environment...

Fussell, Vincent

2013-09-19T23:59:59.000Z

98

Apparatus for encapsulating a photovoltaic module  

DOE Patents (OSTI)

The subject inventions concern various photovoltaic module designs to protect the module from horizontal and vertical impacts and degradation of solar cell efficiency caused by moisture. In one design, a plurality of panel supports that are positioned adjacent to the upper panel in a photovoltaic module absorb vertical forces exerted along an axis perpendicular to the upper panel. Other designs employ layers of glass and tempered glass, respectively, to protect the module from vertical impacts. A plurality of button-shaped channels is used around the edges of the photovoltaic module to absorb forces applied to the module along an axis parallel to the module and direct moisture away from the module that could otherwise penetrate the module and adversely affect the cells within the module. A spacer is employed between the upper and lower panels that has a coefficient of thermal expansion substantially equivalent to the coefficient of thermal expansion of at least one of the panels.

Albright, Scot P. (El Paso, TX); Dugan, Larry M. (Boulder, CO)

1995-10-24T23:59:59.000Z

99

Metallic Inks for Solar Cells: Cooperative Research and Development Final Report, CRADA Number CRD-10-370  

SciTech Connect

This document describes the statement of work for National Renewable Energy Laboratory (NREL) as a subcontractor for Applied Nanotech, Inc. (ANI) for the Phase II SBIR contract with the Department of Energy to build silicon solar cells using non-contact printed, nanoparticle-based metallic inks. The conductive inks are based upon ANI's proprietary method for nanoparticle dispersion. The primary inks under development are aluminum for silicon solar cell back plane contacts and copper for top interdigitated contacts. The current direction of silicon solar cell technology is to use thinner silicon wafers. The reduction in wafer thickness reduces overall material usage and can increase efficiency. These thin silicon wafers are often very brittle and normal methods used for conductive feed line application, such as screen-printing, are detrimental. The Phase II program will be focused on materials development for metallic inks that can be applied to a silicon solar cell using non-contact methods. Uniform BSF (Back Surface Field) formation will be obtained by optimizing ink formulation and curing conditions to improve cell efficiency.

van Hest, M.

2013-04-01T23:59:59.000Z

100

MiR-145 is downregulated in human ovarian cancer and modulates cell growth and invasion by targeting p70S6K1 and MUC1  

SciTech Connect

Highlights: •MiR-145 is downregulated in human ovarian cancer. •MiR-145 targets p70S6K1 and MUC1. •p70S6K1 and MUC1 are involved in miR-145 mediated tumor cell growth and cell invasion, respectively. -- Abstract: MicroRNAs (miRNAs) are a family of small non-coding RNA molecules that regulate gene expression at post-transcriptional levels. Previous studies have shown that miR-145 is downregulated in human ovarian cancer; however, the roles of miR-145 in ovarian cancer growth and invasion have not been fully demonstrated. In the present study, Northern blot and qRT-PCR analysis indicate that miR-145 is downregulated in ovarian cancer tissues and cell lines, as well as in serum samples of ovarian cancer, compared to healthy ovarian tissues, cell lines and serum samples. Functional studies suggest that miR-145 overexpression leads to the inhibition of colony formation, cell proliferation, cell growth viability and invasion, and the induction of cell apoptosis. In accordance with the effect of miR-145 on cell growth, miR-145 suppresses tumor growth in vivo. MiR-145 is found to negatively regulate P70S6K1 and MUC1 protein levels by directly targeting their 3?UTRs. Importantly, the overexpression of p70S6K1 and MUC1 can restore the cell colony formation and invasion abilities that are reduced by miR-145, respectively. MiR-145 expression is increased after 5-aza-CdR treatment, and 5-aza-CdR treatment results in the same phenotype as the effect of miR-145 overexpression. Our study suggests that miR-145 modulates ovarian cancer growth and invasion by suppressing p70S6K1 and MUC1, functioning as a tumor suppressor. Moreover, our data imply that miR-145 has potential as a miRNA-based therapeutic target for ovarian cancer.

Wu, Huijuan [Department of Gynecological Oncology, Tianjin Medical University Cancer Institute and Hospital, National Clinical Research Center of Cancer, Key Laboratory of Cancer Prevention and Therapy, Tianjin 300060 (China)] [Department of Gynecological Oncology, Tianjin Medical University Cancer Institute and Hospital, National Clinical Research Center of Cancer, Key Laboratory of Cancer Prevention and Therapy, Tianjin 300060 (China); Xiao, ZhengHua [Department of gynecology, Yongchuan Affiliated Hospital of Chongqing Medical University, Chongqing City 404100 (China)] [Department of gynecology, Yongchuan Affiliated Hospital of Chongqing Medical University, Chongqing City 404100 (China); Wang, Ke; Liu, Wenxin [Department of Gynecological Oncology, Tianjin Medical University Cancer Institute and Hospital, National Clinical Research Center of Cancer, Key Laboratory of Cancer Prevention and Therapy, Tianjin 300060 (China)] [Department of Gynecological Oncology, Tianjin Medical University Cancer Institute and Hospital, National Clinical Research Center of Cancer, Key Laboratory of Cancer Prevention and Therapy, Tianjin 300060 (China); Hao, Quan, E-mail: quanhao2002@163.com [Department of Gynecological Oncology, Tianjin Medical University Cancer Institute and Hospital, National Clinical Research Center of Cancer, Key Laboratory of Cancer Prevention and Therapy, Tianjin 300060 (China)] [Department of Gynecological Oncology, Tianjin Medical University Cancer Institute and Hospital, National Clinical Research Center of Cancer, Key Laboratory of Cancer Prevention and Therapy, Tianjin 300060 (China)

2013-11-29T23:59:59.000Z

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Carbohydrate-binding modules promote the enzymatic deconstruction of intact plant cell walls by targeting and proximity effects  

Science Journals Connector (OSTI)

...is to bind soluble xylans and xylooligosaccharides on the surface of the endogenous...2009 ) Enzymatic treatments reveal differential capacities for xylan recognition and degradation...Receptors, Cell Surface 0 Xylans 0 saccharide-binding...

Cécile Hervé; Artur Rogowski; Anthony W. Blake; Susan E. Marcus; Harry J. Gilbert; J. Paul Knox

2010-01-01T23:59:59.000Z

102

CANNABINOID MODULATION OF HIV-1 TAT-STIMULATED ADHESION OF MACROPHAGE-LIKE CELLS TO THE EXTRACELLULAR MATRIX.  

E-Print Network (OSTI)

??HIV-Associated Neurocognitive Disorders (HANDs) are becoming one of the largest problems in patients infected with HIV-1. The ability of infected cells such as monocytes and… (more)

Drevik, Johnathan

2013-01-01T23:59:59.000Z

103

Modulated waves and pattern formation in coupled discrete nonlinear LC transmission lines  

Science Journals Connector (OSTI)

The conditions for the propagation of modulated waves on a system of two coupled discrete nonlinear LC transmission lines with negative nonlinear resistance are examined, each line of the network containing a finite number of cells. Our theoretical analysis shows that the telegrapher equations of the electrical transmission line can be reduced to a set of two coupled discrete complex Ginzburg-Landau equations. Using the standard linear stability analysis, we derive the expression for the growth rate of instability as a function of the wave numbers and system parameters, then obtain regions of modulational instability. Using numerical simulations, we examine the long-time dynamics of modulated waves in the line. This leads to the generation of nonlinear modulated waves which have the shape of a soliton for the fast and low modes. The effects of dissipative elements on the propagation are also shown. The analytical results are corroborated by numerical simulations.

Fabien II Ndzana; Alidou Mohamadou; Timoléon C. Kofané; Lars Q. English

2008-07-29T23:59:59.000Z

104

Rank Modulation with Multiplicity Anxiao (Andrew) Jiang  

E-Print Network (OSTI)

Rank Modulation with Multiplicity Anxiao (Andrew) Jiang Computer Science and Eng. Dept. Texas A&M University College Station, TX 77843 yuewang@cse.tamu.edu Abstract--Rank modulation is a scheme that uses-change memories, etc. An extension of rank modulation is studied in this paper, where multiple cells can have

Jiang, Anxiao "Andrew"

105

Expression of a drug resistance gene in human neuroblastoma cell lines: modulation by retinoic acid-induced differentiation.  

Science Journals Connector (OSTI)

...labeled riboprobe per ml. Filters were...exposed for 2 to 4 days at -70?C. RNase...Accumulations were per- formed in SH-SY5Y...and without 3 or 4 days of retinoic acid treatment...retinoic acid was begun 2 days before the cells were...LSH-PE or 200 ng of PE per ml (equimolar concentrations...

S E Bates; L A Mickley; Y N Chen; N Richert; J Rudick; J L Biedler; A T Fojo

1989-10-01T23:59:59.000Z

106

Modulation of Growth of a Human Prostatic Cancer Cell Line (PC-3) in Agar Culture by Normal Human Lung Fibroblasts  

Science Journals Connector (OSTI)

...fibroblasts; FBS, fetal bovine serum: CFE, colony-forming efficiency; CD, colony...prepared hard-agar base. Scoring for CFE and CD. Growth of PC-3 was defined as...establish a colony of 10 or more cells (CFE) and also as the continued growth of established...

David Kirk; Marika F. Szalay; M. Edward Kaighn

1981-03-01T23:59:59.000Z

107

Effects of oxyanions, natural organic matter, and bacterial cell numbers on the bioreduction of lepidocrocite ({gamma}-FeOOH) and the formation of secondary mineralization products.  

SciTech Connect

Microbial reduction of Fe(III) oxides results in the production of Fe(II) and may lead to the subsequent formation of Fe(II)-bearing secondary mineralization products including magnetite, siderite, vivianite, chukanovite (ferrous hydroxy carbonate (FHC)), and green rust; however, the factors controlling the formation of specific Fe(II) phases are often not well-defined. This study examined effects of (i) a range of inorganic oxyanions (arsenate, borate, molybdate, phosphate, silicate, and tungstate), (ii) natural organic matter (citrate, oxalate, microbial extracellular polymeric substances [EPS], and humic substances), and (iii) the type and number of dissimilatory iron-reducing bacteria on the bioreduction of lepidocrocite and formation of Fe(II)-bearing secondary mineralization products. The bioreduction kinetics clustered into two distinct Fe(II) production profiles. 'Fast' Fe(II) production kinetics [19-24 mM Fe(II) d-1] were accompanied by formation of magnetite and FHC in the unamended control and in systems amended with borate, oxalate, gellan EPS, or Pony Lake fulvic acid or having 'low' cell numbers. Systems amended with arsenate, citrate, molybdate, phosphate, silicate, tungstate, EPS from Shewanella putrefaciens CN32, or humic substances derived from terrestrial plant material or with 'high' cell numbers exhibited comparatively slow Fe(II) production kinetics [1.8-4.0 mM Fe(II) d-1] and the formation of green rust. The results are consistent with a conceptual model whereby competitive sorption of more strongly bound anions blocks access of bacterial cells and reduced electron-shuttling compounds to sites on the iron oxide surface, thereby limiting the rate of bioreduction.

O'Loughlin, E. J.; Gorski, C. A.; Scherer, M. M.; Boyanov, M. I.; Kemner, K. M.; Biosciences Division; Univ. of Iowa

2010-06-15T23:59:59.000Z

108

Photovoltaic solar concentrator module  

SciTech Connect

This invention consists of a planar photovoltaic concentrator module for producing an electrical signal from incident solar radiation which includes an electrically insulating housing having a front wall, an opposing back wall and a hollow interior. A solar cell having electrical terminals is positioned within the interior of the housing. A planar conductor is connected with a terminal of the solar cell of the same polarity. A lens forming the front wall of the housing is operable to direct solar radiation incident to the lens into the interior of the housing. A refractive optical element in contact with the solar cell and facing the lens receives the solar radiation directed into the interior of the housing by the lens and directs the solar radiation to the solar cell to cause the solar cell to generate an electrical signal. An electrically conductive planar member is positioned in the housing to rest on the housing back wall in supporting relation with the solar cell terminal of opposite polarity. The planar member is operable to dissipate heat radiated by the solar cell as the solar cell generates an electrical signal and further forms a solar cell conductor connected with the solar cell terminal to permit the electrical signal generated by the solar cell to be measured between the planar member and the conductor.

Chiang, C.J.

1991-05-16T23:59:59.000Z

109

CHIR99021 promotes self-renewal of mouse embryonic stem cells by modulation of protein-encoding gene and long intergenic non-coding RNA expression  

SciTech Connect

Embryonic stem cells (ESCs) can proliferate indefinitely in vitro and differentiate into cells of all three germ layers. These unique properties make them exceptionally valuable for drug discovery and regenerative medicine. However, the practical application of ESCs is limited because it is difficult to derive and culture ESCs. It has been demonstrated that CHIR99021 (CHIR) promotes self-renewal and enhances the derivation efficiency of mouse (m)ESCs. However, the downstream targets of CHIR are not fully understood. In this study, we identified CHIR-regulated genes in mESCs using microarray analysis. Our microarray data demonstrated that CHIR not only influenced the Wnt/?-catenin pathway by stabilizing ?-catenin, but also modulated several other pluripotency-related signaling pathways such as TGF-?, Notch and MAPK signaling pathways. More detailed analysis demonstrated that CHIR inhibited Nodal signaling, while activating bone morphogenetic protein signaling in mESCs. In addition, we found that pluripotency-maintaining transcription factors were up-regulated by CHIR, while several developmental-related genes were down-regulated. Furthermore, we found that CHIR altered the expression of epigenetic regulatory genes and long intergenic non-coding RNAs. Quantitative real-time PCR results were consistent with microarray data, suggesting that CHIR alters the expression pattern of protein-encoding genes (especially transcription factors), epigenetic regulatory genes and non-coding RNAs to establish a relatively stable pluripotency-maintaining network. - Highlights: • Combined use of CHIR with LIF promotes self-renewal of J1 mESCs. • CHIR-regulated genes are involved in multiple pathways. • CHIR inhibits Nodal signaling and promotes Bmp4 expression to activate BMP signaling. • Expression of epigenetic regulatory genes and lincRNAs is altered by CHIR.

Wu, Yongyan [College of Veterinary Medicine, Northwest A and F University, Yangling 712100, Shaanxi (China); Key Laboratory of Animal Biotechnology, Ministry of Agriculture, Northwest A and F University, Yangling 712100, Shaanxi (China); Ai, Zhiying [Key Laboratory of Animal Biotechnology, Ministry of Agriculture, Northwest A and F University, Yangling 712100, Shaanxi (China); College of Life Sciences, Northwest A and F University, Yangling 712100, Shaanxi (China); Yao, Kezhen [College of Veterinary Medicine, Northwest A and F University, Yangling 712100, Shaanxi (China); Key Laboratory of Animal Biotechnology, Ministry of Agriculture, Northwest A and F University, Yangling 712100, Shaanxi (China); Cao, Lixia; Du, Juan; Shi, Xiaoyan [Key Laboratory of Animal Biotechnology, Ministry of Agriculture, Northwest A and F University, Yangling 712100, Shaanxi (China); College of Life Sciences, Northwest A and F University, Yangling 712100, Shaanxi (China); Guo, Zekun, E-mail: gzk@nwsuaf.edu.cn [College of Veterinary Medicine, Northwest A and F University, Yangling 712100, Shaanxi (China); Key Laboratory of Animal Biotechnology, Ministry of Agriculture, Northwest A and F University, Yangling 712100, Shaanxi (China); Zhang, Yong, E-mail: zhylab@hotmail.com [College of Veterinary Medicine, Northwest A and F University, Yangling 712100, Shaanxi (China); Key Laboratory of Animal Biotechnology, Ministry of Agriculture, Northwest A and F University, Yangling 712100, Shaanxi (China)

2013-10-15T23:59:59.000Z

110

3-D particle-in-cell simulations for quasi-phase matched direct laser electron acceleration in density-modulated plasma waveguides  

E-Print Network (OSTI)

Quasi-phase matched direct laser acceleration (DLA) of electrons can be realized with guided, radially polarized laser pulses in density-modulated plasma waveguides. A 3-D particle-in-cell model has been developed to describe the interactions among the laser field, injected electrons, and the background plasma in the DLA process. Simulations have been conducted to study the scheme in which seed electron bunches with moderate energies are injected into a plasma waveguide and the DLA is performed by use of relatively low-power (0.5-2 TW) laser pulses. Selected bunch injection delays with respect to the laser pulse, bunch lengths, and bunch transverse sizes have been studied in a series of simulations of DLA in a plasma waveguide. The results show that the injection delay is important for controlling the final transverse properties of short electron bunches, but it also affects the final energy gain. With a long injected bunch length, the enhanced ion-focusing force helps to collimate the electrons and a relativ...

Lin, M -W; Chen, S -H; Jovanovic, I

2014-01-01T23:59:59.000Z

111

DOE Hydrogen and Fuel Cells Program Record 11002: Number of Cars Equivalent to 100 Metric Tons of Avoided Greenhouse Gases per Year  

NLE Websites -- All DOE Office Websites (Extended Search)

02 Date: January 5, 2011 02 Date: January 5, 2011 Title: Number of Cars Equivalent to 100 Metric Tons of Avoided Greenhouse Gases per Year Originator: Andrea Chew & Tien Nguyen Approved by: Sunita Satyapal Date: January 25, 2011 A conventional mid-size gasoline car emits 0.45 kg of greenhouse gases (GHG) per mile. 1 One hundred (100) metric tons (t) of GHG per year are equivalent to emissions from 17 conventional gasoline cars. Item: The GHG emissions cited above are from an analysis record prepared by the Department of Energy's Fuel Cell Technologies and Vehicle Technologies Programs on life-cycle emissions of greenhouse gases and petroleum use for several light-duty vehicles. 1 For cars that are between 1 and 5 years old, the average mileage is approximately 13,000,

112

Photovoltaic module with adhesion promoter  

DOE Patents (OSTI)

Photovoltaic modules with adhesion promoters and methods for fabricating photovoltaic modules with adhesion promoters are described. A photovoltaic module includes a solar cell including a first surface and a second surface, the second surface including a plurality of interspaced back-side contacts. A first glass layer is coupled to the first surface by a first encapsulating layer. A second glass layer is coupled to the second surface by a second encapsulating layer. At least a portion of the second encapsulating layer is bonded directly to the plurality of interspaced back-side contacts by an adhesion promoter.

2013-10-08T23:59:59.000Z

113

Reduced Toxicity With Intensity Modulated Radiation Therapy (IMRT) for Desmoplastic Small Round Cell Tumor (DSRCT): An Update on the Whole Abdominopelvic Radiation Therapy (WAP-RT) Experience  

SciTech Connect

Purpose: Desmoplastic small round cell tumor (DSRCT) is a rare malignancy typically involving the peritoneum in young men. Whole abdominopelvic radiation therapy (WAP-RT) using conventional 2-dimensional (2D) radiation therapy (RT) is used to address local recurrence but has been limited by toxicity. Our objectives were to assess the benefit of intensity modulated radiation therapy (IMRT) on toxicity and to update the largest series on radiation for DSRCT. Methods and Materials: The records of 31 patients with DSRCT treated with WAP-RT (22 with 2D-RT and 9 with IMRT) between 1992 and 2011 were retrospectively reviewed. All received multi-agent chemotherapy and maximal surgical debulking followed by 30 Gy of WAP-RT. A further focal boost of 12 to 24 Gy was used in 12 cases. Boost RT and autologous stem cell transplantation were nearly exclusive to patients treated with 2D-RT. Toxicities were assessed with the Common Terminology Criteria for Adverse Events. Dosimetric analysis compared IMRT and simulated 2D-RT dose distributions. Results: Of 31 patients, 30 completed WAP-RT, with a median follow-up after RT of 19 months. Acute toxicity was reduced with IMRT versus 2D-RT: P=.04 for gastrointestinal toxicity of grade 2 or higher (33% vs 77%); P=.02 for grade 4 hematologic toxicity (33% vs 86%); P=.01 for rates of granulocyte colony-stimulating factor; and P=.04 for rates of platelet transfusion. Post treatment red blood cell and platelet transfusion rates were also reduced (P=.01). IMRT improved target homogeneity ([D05-D95]/D05 of 21% vs 46%) and resulted in a 21% mean bone dose reduction. Small bowel obstruction was the most common late toxicity (23% overall). Updated 3-year overall survival and progression-free survival rates were 50% and 24%, respectively. Overall survival was associated with distant metastasis at diagnosis on multivariate analysis. Most failures remained intraperitoneal (88%). Conclusions: IMRT for consolidative WAP-RT in DSRCT improves hematologic toxicity in particular. Although the long-term efficacy of current treatment options remains disappointing, the improved therapeutic index of IMRT may aid in generalizing its use and allowing the addition of novel approaches such as intraperitoneal immunotherapy.

Desai, Neil B. [Department of Radiation Oncology, Memorial Sloan-Kettering Cancer Center, New York, New York (United States)] [Department of Radiation Oncology, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Stein, Nicholas F. [Department of Medical Physics, Memorial Sloan-Kettering Cancer Center, New York, New York (United States)] [Department of Medical Physics, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); LaQuaglia, Michael P. [Department of Surgery, Memorial Sloan-Kettering Cancer Center, New York, New York (United States)] [Department of Surgery, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Alektiar, Kaled M. [Department of Radiation Oncology, Memorial Sloan-Kettering Cancer Center, New York, New York (United States)] [Department of Radiation Oncology, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Kushner, Brian H.; Modak, Shakeel; Magnan, Heather M. [Department of Pediatrics, Memorial Sloan-Kettering Cancer Center, New York, New York (United States)] [Department of Pediatrics, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Goodman, Karyn [Department of Radiation Oncology, Memorial Sloan-Kettering Cancer Center, New York, New York (United States)] [Department of Radiation Oncology, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Wolden, Suzanne L., E-mail: woldens@mskcc.org [Department of Radiation Oncology, Memorial Sloan-Kettering Cancer Center, New York, New York (United States)

2013-01-01T23:59:59.000Z

114

UNIT NUMBER:  

NLE Websites -- All DOE Office Websites (Extended Search)

193 UNIT NUMBER: 197 UNIT NAME: CONCRETE RUBBLE PILE (30) REGULATORY STATUS: AOC LOCATION: Outside plant security fence, north of the plant on Big Bayou Creek on private property....

115

UNIT NUMBER  

NLE Websites -- All DOE Office Websites (Extended Search)

7 UNIT NUMBER UNIT NAME Rubble oile 41 REGULATORY STATUS: AOC LOCATION: Butler Lake Dam, West end of Butler Lake top 20 ft wide, 10 ft APPROXIMATE DIMENSIONS: 200 ft long, base 30...

116

Casing for a battery of cylindrical electric cells  

SciTech Connect

A casing for a battery of cylindrical electric cells lying parallel to one another includes two insulating half casings each formed by one or more modules having n or n + 1 recesses in the form of part cylindrical cavities. The modules have two end edges and have respective complementary interfitting portions enabling two modules to be connected end-to-end. Each module further has two base plates orthogonal to the axes of said part cylindrical cavities and having complementary fixing parts. A casing having any number of cell-receiving recesses greater than one can be assembled from modules having n and n + 1 part cylindrical cavities, where n is equal to 2.

Adam, M.

1985-04-09T23:59:59.000Z

117

Development of Hydrogen Selective Membranes/Modules as Reactors/Separators for Distributed Hydrogen Production - DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report  

NLE Websites -- All DOE Office Websites (Extended Search)

3 3 FY 2012 Annual Progress Report DOE Hydrogen and Fuel Cells Program Paul KT Liu Media and Process Technology Inc. (M&P) 1155 William Pitt Way Pittsburgh, PA 15238 Phone: (412) 826-3711 Email: pliu@mediaandprocess.com DOE Managers HQ: Sara Dillich Phone: (202) 586-7925 Email: Sara.Dillich@ee.doe.gov GO: Katie Randolph Phone: (720) 356-1759 Email: Katie.Randolph@go.doe.gov Contract Number: DE-FG36-05GO15092 Subcontractor: University of Southern California Project Start Date: July 1, 2005 Projected End Date: December 31, 2012 Fiscal Year (FY) 2012 Objectives The water-gas shift (WGS) reaction becomes less efficient when high CO conversion is required, such as for distributed hydrogen production applications. Our project

118

High-Dose and Extended-Field Intensity Modulated Radiation Therapy for Early-Stage NK/T-Cell Lymphoma of Waldeyer's Ring: Dosimetric Analysis and Clinical Outcome  

SciTech Connect

Purpose: To assess the dosimetric benefit, treatment outcome, and toxicity of high-dose and extended-field intensity modulated radiation therapy (IMRT) in patients with early-stage NK/T-cell lymphoma of Waldeyer's ring (WR-NKTCL). Methods and Materials: Thirty patients with early-stage WR-NKTCL who received extended-field IMRT were retrospectively reviewed. The prescribed dose was 50 Gy to the primary involved regions and positive cervical lymph nodes (planning target volume requiring radical irradiation [PTV{sub 50}]) and 40 Gy to the negative cervical nodes (PTV{sub 40}). Dosimetric parameters for the target volume and critical normal structures were evaluated. Locoregional control (LRC), overall survival (OS), and progression-free survival (PFS) were calculated using the Kaplan-Meier method. Results: The median mean doses to the PTV{sub 50} and PTV{sub 40} were 53.2 Gy and 43.0 Gy, respectively. Only 1.4% of the PTV{sub 50} and 0.9% of the PTV{sub 40} received less than 95% of the prescribed dose, indicating excellent target coverage. The average mean doses to the left and right parotid glands were 27.7 and 28.4 Gy, respectively. The 2-year OS, PFS, and LRC rates were 71.2%, 57.4%, and 87.8%. Most acute toxicities were grade 1 to 2, except for grade ?3 dysphagia and mucositis. The most common late toxicity was grade 1-2 xerostomia, and no patient developed any ?grade 3 late toxicities. A correlation between the mean dose to the parotid glands and the degree of late xerostomia was observed. Conclusions: IMRT achieves excellent target coverage and dose conformity, as well as favorable survival and locoregional control rates with acceptable toxicities in patients with WR-NKTCL.

Bi, Xi-Wen; Li, Ye-Xiong, E-mail: yexiong@yahoo.com; Fang, Hui; Jin, Jing; Wang, Wei-Hu; Wang, Shu-Lian; Liu, Yue-Ping; Song, Yong-Wen; Ren, Hua; Dai, Jian-Rong

2013-12-01T23:59:59.000Z

119

Definition: PV module | Open Energy Information  

Open Energy Info (EERE)

Definition Definition Edit with form History Facebook icon Twitter icon » Definition: PV module Jump to: navigation, search Dictionary.png PV module A unit comprised of several PV cells, and the principal unit of a PV array; it is intended to generate direct current power under un-concentrated sunlight.[1][2] View on Wikipedia Wikipedia Definition A solar panel is a set of solar photovoltaic modules electrically connected and mounted on a supporting structure. A photovoltaic module is a packaged, connected assembly of photovoltaic cells. The solar module can be used as a component of a larger photovoltaic system to generate and supply electricity in commercial and residential applications. Each module is rated by its DC output power under standard test conditions (STC), and

120

Development of New Absorber Materials to Achieve Organic Photovoltaic Commercial Modules with 15% Efficiency and 20 Years Lifetime: Cooperative Research and Development Final Report, CRADA Number CRD-12-498  

SciTech Connect

Under this CRADA the parties will develop intermediates or materials that can be employed as the active layer in dye sensitized solar cells printed polymer systems, or small molecule organic photovoltaics.

Olson, D.

2014-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Seizure-induced alterations in fast-spiking basket cell GABA currents modulate frequency and coherence of gamma oscillation in network simulations  

SciTech Connect

Gamma frequency oscillations have been proposed to contribute to memory formation and retrieval. Fast-spiking basket cells (FS-BCs) are known to underlie development of gamma oscillations. Fast, high amplitude GABA synapses and gap junctions have been suggested to contribute to gamma oscillations in FS-BC networks. Recently, we identified that, apart from GABAergic synapses, FS-BCs in the hippocampal dentate gyrus have GABAergic currents mediated by extrasynaptic receptors. Our experimental studies demonstrated two specific changes in FS-BC GABA currents following experimental seizures [Yu et al., J. Neurophysiol. 109, 1746 (2013)]: increase in the magnitude of extrasynaptic (tonic) GABA currents and a depolarizing shift in GABA reversal potential (E{sub GABA}). Here, we use homogeneous networks of a biophysically based model of FS-BCs to examine how the presence of extrasynaptic GABA conductance (g{sub GABA-extra}) and experimentally identified, seizure-induced changes in g{sub GABA-extra} and E{sub GABA} influence network activity. Networks of FS-BCs interconnected by fast GABAergic synapses developed synchronous firing in the dentate gamma frequency range (40–100?Hz). Systematic investigation revealed that the biologically realistic range of 30 to 40 connections between FS-BCs resulted in greater coherence in the gamma frequency range when networks were activated by Poisson-distributed dendritic synaptic inputs rather than by homogeneous somatic current injections, which were balanced for FS-BC firing frequency in unconnected networks. Distance-dependent conduction delay enhanced coherence in networks with 30–40 FS-BC interconnections while inclusion of gap junctional conductance had a modest effect on coherence. In networks activated by somatic current injections resulting in heterogeneous FS-BC firing, increasing g{sub GABA-extra} reduced the frequency and coherence of FS-BC firing when E{sub GABA} was shunting (?74?mV), but failed to alter average FS-BC frequency when E{sub GABA} was depolarizing (?54?mV). When FS-BCs were activated by biologically based dendritic synaptic inputs, enhancing g{sub GABA-extra} reduced the frequency and coherence of FS-BC firing when E{sub GABA} was shunting and increased average FS-BC firing when E{sub GABA} was depolarizing. Shifting E{sub GABA} from shunting to depolarizing potentials consistently increased network frequency to and above high gamma frequencies (>80?Hz). Since gamma oscillations may contribute to learning and memory processing [Fell et al., Nat. Neurosci. 4, 1259 (2001); Jutras et al., J. Neurosci. 29, 12521 (2009); Wang, Physiol. Rev. 90, 1195 (2010)], our demonstration that network oscillations are modulated by extrasynaptic inhibition in FS-BCs suggests that neuroactive compounds that act on extrasynaptic GABA receptors could impact memory formation by modulating hippocampal gamma oscillations. The simulation results indicate that the depolarized FS-BC GABA reversal, observed after experimental seizures, together with enhanced spillover extrasynaptic GABA currents are likely to promote generation of focal high frequency activity associated with epileptic networks.

Proddutur, Archana; Yu, Jiandong; Elgammal, Fatima S. [Department of Neurology and Neurosciences, New Jersey Medical School, Rutgers, Newark, New Jersey 07103 (United States)] [Department of Neurology and Neurosciences, New Jersey Medical School, Rutgers, Newark, New Jersey 07103 (United States); Santhakumar, Vijayalakshmi, E-mail: santhavi@njms.rutgers.edu [Department of Neurology and Neurosciences, New Jersey Medical School, Rutgers, Newark, New Jersey 07103 (United States) [Department of Neurology and Neurosciences, New Jersey Medical School, Rutgers, Newark, New Jersey 07103 (United States); Department of Pharmacology and Physiology, New Jersey Medical School, Rutgers, Newark, New Jersey 07103 (United States)

2013-12-15T23:59:59.000Z

122

Analysis and Design of Smart PV Module  

E-Print Network (OSTI)

This thesis explores the design of a smart photovoltaic (PV) module- a PV module in which PV cells in close proximity are electrically grouped to form a pixel and are connected to dc-dc converter blocks which reside embedded in the back pane...

Mazumdar, Poornima

2012-12-10T23:59:59.000Z

123

TOB Module Assembly  

NLE Websites -- All DOE Office Websites (Extended Search)

SiTracker Home Page Participating Institutions and Principal Contacts Useful Links Notes Images TOB Module Assembly and Testing Project TOB Integration Data Tracker Offline DQM LHC Fluence Calculator Total US Modules Tested Graph Total US Modules Tested Graph Total US Modules Tested Total US Modules Tested US Modules Tested Graph US Modules Tested Graph US Modules Tested US Modules Tested Rod Assembly TOB Modules on a Rod TOB Rod Insertion Installation of a TOB Rod Completed TOB Completed Tracker Outer Barrel TOB Module Assembly and Testing Project All 5208 modules of the CMS Tracker Outer Barrel were assembled and tested at two production sites in the US: the Fermi National Accelerator Laboratory and the University of California at Santa Barbara. The modules were delivered to CERN in the form of rods, with the last shipment taking

124

Characterization of Dynamic Loads on Solar Modules with Respect...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

78 CHARACTERIZATION OF DYNAMIC LOADS ON SOLAR MODULES WITH RESPECT TO FRACTURE OF SOLAR CELLS Sascha Dietrich, Matthias Pander, Martin Sander, Matthias Ebert & Fraunhofer - Center...

125

Thin Film Solar Cells Derived from Sintered Semiconductor Quantum Dots: Cooperative Research and Development Final Report, CRADA number CRD-07-00226  

SciTech Connect

The NREL/Evident team will develop techniques to fabricate thin film solar cells where the absorption layers comprising the solar cells are derived from sintered semiconductor quantum dots.

Ginley, D. S.

2010-07-01T23:59:59.000Z

126

Performance of MicroLink Cells Developed Under Navy STTR: Cooperative Research and Development Final Report, CRADA Number CRD-11-426  

SciTech Connect

Evaluate MicroLink cells as a function of temperature and spectral irradiance following the teams' standard procedures. These measurements will include the standard procedures for evaluating multijunction cells including quantum efficiency measurements and current versus voltage measurements.

Emery, K.

2013-06-01T23:59:59.000Z

127

Case Number:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Name of Petitioner: Name of Petitioner: Date of Filing: Case Number: Department of Energy Washington, DC 20585 JUL 2 2 2009 DEPARTMENT OF ENERGY OFFICE OF HEARINGS AND APPEALS Appeal Dean P. Dennis March 2, 2009 TBA-0072 Dean D. Dennis filed a complaint of retaliation under the Department of Energy (DOE) Contractor Employee Protection Program, 10 C.F.R. Part 708. Mr. Dennis alleged that he engaged in protected activity and that his employer, National Security Technologies, LLC (NSTec ), subsequently terminated him. An Office of Hearings and Appeals (OHA) Hearing Officer denied relief in Dean P. Dennis, Case No. TBH-0072, 1 and Mr. Dennis filed the instant appeal. As discussed below, the appeal is denied. I. Background The DOE established its Contractor Employee Protection Program to "safeguard public

128

JOB NUMBER  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

. . . . . . . . . .: LEAVE BLANK (NARA use only) JOB NUMBER N/-&*W- 9d - 3 DATE RECEIVED " -1s - 9 J - NOTIFICATION TOAGENCY , In accordance with the provisions of 44 U.S.C. 3303a the disposition request. including amendments, is ap roved except , . l for items that may be marke,, ,"dis osition not approved" or "withdrawn in c o i m n 10. 4. NAME OF PERSON WITH WHOM TO CONFER 5 TELEPHONE Jannie Kindred (202) 5&-333 5 - 2 -96 6 AGENCYCERTIFICATION -. ~ - I hereby certify that I am authorized to act for this agency in matters pertaining to the disposition of its records and that the records roposed for disposal are not now needed for the business of this agency or wiRnot be needed after t G t r & s s d ; and that written concurrence from

129

KPA Number  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Supports CMM-SW Level 3 Supports CMM-SW Level 3 Mapping of the DOE Information Systems Engineering Methodology to the Software Engineering Institute (SEI) Software Capability Maturity Model (CMM-SW) level 3. Date: September 2002 Page 1 KPA Number KPA Activity SEM Section SEM Work Product SQSE Web site http://cio.doe.gov/sqse ORGANIZATION PROCESS FOCUS OPF-1 The software process is assessed periodically, and action plans are developed to address the assessment findings. Chapter 1 * Organizational Process Management * Process Improvement Action Plan * Methodologies ! DOE Methodologies ! SEM OPF-2 The organization develops and maintains a plan for its software process development and improvement activities. Chapter 1 * Organizational Process Management * Process Improvement

130

Development of Commercial Technology for Thin Film Silicon Solar Cells on Glass: Cooperative Research and Development Final Report, CRADA Number CRD-07-209  

SciTech Connect

NREL has conducted basic research relating to high efficiency, low cost, thin film silicon solar cell design and the method of making solar cells. Two patents have been issued to NREL in the above field. In addition, specific process and metrology tools have been developed by NREL. Applied Optical Sciences Corp. (AOS) has expertise in the manufacture of solar cells and has developed its own unique concentrator technology. AOS wants to complement its solar cell expertise and its concentrator technology by manufacturing flat panel thin film silicon solar cell panels. AOS wants to take NREL's research to the next level, using it to develop commercially viable flat pane, thin film silicon solar cell panels. Such a development in equipment, process, and metrology will likely produce the lowest cost solar cell technology for both commercial and residential use. NREL's fundamental research capability and AOS's technology and industrial background are complementary to achieve this product development.

Sopori, B.

2013-03-01T23:59:59.000Z

131

Joint Development of Coated Conductor and Low Cost Thin Film Solar Cells: Cooperative Research and Development Final Report, CRADA Number CRD-007-213  

SciTech Connect

UES plans on developing CIGS thin films by using Metal Organic Deposition (MOD) technique as it is a low-cost, non-vacuum method for scale-up to large area PV modules. NREL will support UES, Inc. through expert processing, characterization and device fabrication. NREL scientists will also help develop a processing phase diagram which includes composition, film thickness, annealing temperature and ambient conditions. Routine measurements of devices and materials will be done under NREL's core support project.

Bhattacharya, R.

2011-02-01T23:59:59.000Z

132

Small molecules activators of the Nrf2-HO-1 antioxidant axis modulate heme metabolism and inflammation in BV2 microglia cells  

E-Print Network (OSTI)

1 Small molecules activators of the Nrf2-HO-1 antioxidant axis modulate heme metabolism, 16163 Genova, Italy d Department of Clinical and Molecular Biomedicine, Section of Pharmacology-associated protein-1; INF- , interferon- ISL, isoliquiritigenin; LPS, lipopolysaccharide; Nrf2, HF-E2 p45-related

Boyer, Edmond

133

Material and Device Analysis for Efficiency Improvement in Epitaxial Crystalline Solar Cells: Cooperative Research and Development Final Report, CRADA Number CRD-11-433  

SciTech Connect

Crystal Solar has a novel approach for producing low-cost, monocrystalline silicon wafers that are capable of yielding high-efficiency solar cells. The approach involves epitaxial growth of the substrate and a proprietary lift-off technology. Crystal Solar will send selected wafers and cells to NREL for characterization and analyses. NREL will apply a variety of techniques to help identify mechanism(s) that limit the cell efficiency and suggest suitable approaches for mitigation.

Sopori, B.

2014-01-01T23:59:59.000Z

134

The Amino Terminus of Herpes Simplex Virus Type 1 Glycoprotein K (gK) Modulates gB-Mediated Virus-Induced Cell Fusion and Virion Egress  

Science Journals Connector (OSTI)

...extensive virus-induced cell fusion of all cell types, unlike gB syncytial mutations...1982. Herpes simplex virus type 1 cell fusion occurs in the presence of...2007. Herpes simplex virus type 1 mediates fusion through a hemifusion intermediate...

Vladimir N. Chouljenko; Arun V. Iyer; Sona Chowdhury; Dmitry V. Chouljenko; Konstantin G. Kousoulas

2009-09-30T23:59:59.000Z

135

Development of a High Volume Capable Process to Manufacture High Performance Photovoltaic Cells: Cooperative Research and Development Final Report, CRADA Number CRD-08-322  

SciTech Connect

The intent of the work is for RFMD and NREL to cooperate in the development of a commercially viable and high volume capable process to manufacture high performance photovoltaic cells, based on inverted metamorphic (IMM) GaAs technology. The successful execution of the agreement will result in the production of a PV cell using technology that is capable of conversion efficiency at par with the market at the time of release (reference 2009: 37-38%), using RFMD's production facilities. The CRADA work has been divided into three phases: (1) a foundation phase where the teams will demonstrate the manufacturing of a basic PV cell at RFMD's production facilities; (2) a technology demonstration phase where the teams will demonstrate the manufacturing of prototype PV cells using IMM technology at RFMD's production facilities, and; (3) a production readiness phase where the teams will demonstrate the capability to manufacture PV cells using IMM technology with high yields, high reliability, high reproducibility and low cost.

Geisz, J. F.

2012-11-01T23:59:59.000Z

136

Low Cost Solar Array Project cell and module formation research area. Process research of non-CZ silicon material. Final report, November 26, 1980-September 30, 1983  

SciTech Connect

The primary objective of the work reported was to investigate high-risk, high-payoff research areas associated with the Westinghouse process for producing photovoltaic modules using non-Czochralski sheet material. These tasks were addressed: technical feasibility study of forming front and back junctions using liquid dopant techniques, liquid diffusion mask feasibility study, application studies of antireflective material using a meniscus coater, ion implantation compatibility/feasibility study, and cost analysis. (LEW)

Campbell, R.B.

1983-01-01T23:59:59.000Z

137

Economical Patterning of Series Connected a-Silicon Modules  

Science Journals Connector (OSTI)

Different patterning methods are used for manufacturing series connected stripe like cells in a-Si modules whith thin film technologie. These line patterns cause a loss of active cell area, defined by the edge...

W. Juergens; R. Plättner; H. Kausche…

1987-01-01T23:59:59.000Z

138

Planar photovoltaic solar concentrator module  

DOE Patents (OSTI)

A planar photovoltaic concentrator module for producing an electrical signal from incident solar radiation includes an electrically insulating housing having a front wall, an opposing back wall and a hollow interior. A solar cell having electrical terminals is positioned within the interior of the housing. A planar conductor is connected with a terminal of the solar cell of the same polarity. A lens forming the front wall of the housing is operable to direct solar radiation incident to the lens into the interior of the housing. A refractive optical element in contact with the solar cell and facing the lens receives the solar radiation directed into the interior of the housing by the lens and directs the solar radiation to the solar cell to cause the solar cell to generate an electrical signal. An electrically conductive planar member is positioned in the housing to rest on the housing back wall in supporting relation with the solar cell terminal of opposite polarity. The planar member is operable to dissipate heat radiated by the solar cell as the solar cell generates an electrical signal and further forms a solar cell conductor connected with the solar cell terminal to permit the electrical signal generated by the solar cell to be measured between the planar member and the conductor. 5 figs.

Chiang, C.J.

1992-12-01T23:59:59.000Z

139

NERSC Modules Software Environment  

NLE Websites -- All DOE Office Websites (Extended Search)

Environment » Modules Environment Environment » Modules Environment Modules Software Environment NERSC uses the module utility to manage nearly all software. There are two huge advantages of the module approach: NERSC can provide many different versions and/or installations of a single software package on a given machine, including a default version as well as several older and newer versions; and Users can easily switch to different versions or installations without having to explicitly specify different paths. With modules, the MANPATH and related environment variables are automatically managed. Users simply ``load'' and ``unload'' modules to control their environment. The module utility consists of two parts: the module command itself and the modulefiles on which it operates. Module Command

140

Modulational effects in accelerators  

SciTech Connect

We discuss effects of field modulations in accelerators, specifically those that can be used for operational beam diagnostics and beam halo control. In transverse beam dynamics, combined effects of nonlinear resonances and tune modulations influence diffusion rates with applied tune modulation has been demonstrated. In the longitudinal domain, applied RF phase and voltage modulations provide mechanisms for parasitic halo transport, useful in slow crystal extraction. Experimental experiences with transverse tune and RF modulations are also discussed.

Satogata, T.

1997-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

> REPLACE THIS LINE WITH YOUR PAPER IDENTIFICATION NUMBER (DOUBLE-CLICK HERE TO EDIT) < 1 A 13T CMOS Hardened Memory Cell for  

E-Print Network (OSTI)

> REPLACE THIS LINE WITH YOUR PAPER IDENTIFICATION NUMBER (DOUBLE-CLICK HERE TO EDIT) ray neutrons and -particles [1].These energy particles travel through the silicon bulk and create

Ayers, Joseph

142

"Dimension theory of arbitrary modules over 2  

E-Print Network (OSTI)

finite von Neumann algebras and L -Betti numbers I: Foundations to define L2-Betti n* *umbers for arbitrary topological spaces with an action of a discrete group* *n amenable group that the p-th L2-Betti number depends only on the C -module given * *by

Lück, Wolfgang

143

Petroleum Market Module  

Gasoline and Diesel Fuel Update (EIA)

other refinery inputs including alcohols, ethers, bioesters, other refinery inputs including alcohols, ethers, bioesters, natural gas plant liquids production, and refinery processing gain. In addition, the PMM estimates capacity expansion and fuel consumption of domestic refineries. The PMM contains a linear programming representation of U.S. refining activities in the five Petroleum Area Defense Districts (PADDs) (Figure 9). The model is created by aggregating individual refineries into one linear programmming representation for each PADD. This representation provides the marginal costs of production for a number of conventional and new petroleum products. In order to interact with other NEMS modules with different regional representations, certain PMM inputs and outputs are converted from PADD regions to other regional structures and vice versa. The linear programming results are used to determine

144

Optimization of Solar Cell Design for Use with GreenVolts CPV System: Cooperative Research and Development Final Report, CRADA Number CRD-08-00281  

SciTech Connect

GreenVolts, a Bay area start-up, was developing a CPV system that was based on a unique reflective optical design. They were interested in adapting the inverted GaInP/GaAs/GaInAs cell structure designed at NREL for use in their system. The purpose of this project was to optimize the inverted GaInP/GaAs/GaInAs cell for operation in the GreenVolts optical system.

Ward, S.

2011-05-01T23:59:59.000Z

145

Development of a commercial photovoltaic concentrator module  

SciTech Connect

The ojective of this work was to develop the design and prototype of a commercial high-concentration photovoltaic (PV) module. The design is for a 282-sun point-focus concentrating module. Most of the components, subassemblies, and design features incorporate simplifications and ease of manufacturing. The Solar Kinetics, Inc. (SKI) module is designed to incorporate high-efficiency, single-crystal silicon PV cells. The housing is made with aluminum laminated for voltage stand-off and simultaneously providing high thermal conductivity. The Fresnel lens injection molded by American Optical (AO) as singles. The cell assembly consists of a copper heat spreader, a photovoltaic cell soldered, a top and bottom contact, and a reflective secondary optical element (SOE). The cell assemblies passed all of the initial electrical characterization and high-potential tests. Under environmental cycling, the only bond that failed was the PV cell-to-heat spreader interface. The other components (top contact, bottom contact, SOE) passed all the environmental cycling tests. The cell assemblies were designed to be mounted onto the receiver section with a thermally conductive RTV. This geometry was subjected to environmental testing. There was no delamination of this bond nor was there electrical breakdown when the assemblies were subjected to the hi-pot test. A mock module was fabricated for environmental evaluation. This module was subjected to the humidity/freeze cycling to assess the performance of the lens mounting design. This module was also subjected to the rain test after the humidity/freeze cycling and checked for water leaks. The lens showed small displacement from its original position after the environmental cycling. One tablespoon of water did collect inside the module.

Saifee, S.T.; Hutchison, G. [Solar Kinetics, Inc., Dallas, TX (United States)

1992-09-01T23:59:59.000Z

146

Photovoltaic Module Modeling using Simulink/Matlab  

Science Journals Connector (OSTI)

This paper describes a method of modeling and simulation photovoltaic (PV) module that implemented in Simulink/Matlab. It is necessary to define a circuit-based simulation model for a PV cell in order to allow the interaction with a power converter. Characteristics of PV cells that are affected by irradiation and temperature are modeled by a circuit model. A simplified PV equivalent circuit with a diode equivalent is employed as model. The simulation results are compared with difference types of PV module datasheets. Its results indicated that the created simulation blocks in Simulink/matlab are similar to actual PV modules, compatible to different types of PV module and user-friendly.

Krismadinata; Nasrudin Abd. Rahim; Hew Wooi Ping; Jeyraj Selvaraj

2013-01-01T23:59:59.000Z

147

Application of Vacancy Injection Gettering to Improve Efficiency of Solar Cells Produced by Millinet Solar: Cooperative Research and Development Final Report, CRADA Number CRD-10-417  

SciTech Connect

NREL will apply vacancy injection gettering (VIG) to Millinet solar cells and evaluate the performance improvement produced by this process step. The VIG will be done in conjunction with the formation of a back, Al-alloyed, contact. Millinet Solar will provide NREL with cells having AR coating on the front side and screen-printed Al on the backside, which will be processed in the NREL's optical furnace to perform simultaneous VIG and back contact alloying with deep BSF. These cells will be sent back to Millinet solar for a screen-printed front/side contact mask, followed by a second firing at NREL. Detailed analyses will be performed to determine improvements due to BSF and VIG.

Sopori, B.

2012-07-01T23:59:59.000Z

148

Structural and Functional Characterization of a Single-chain Peptide-MHC Molecule that Modulates both Naive and Activated CD8plus T Cells  

SciTech Connect

Peptide-MHC (pMHC) multimers, in addition to being tools for tracking and quantifying antigen-specific T cells, can mediate downstream signaling after T-cell receptor engagement. In the absence of costimulation, this can lead to anergy or apoptosis of cognate T cells, a property that could be exploited in the setting of autoimmune disease. Most studies with class I pMHC multimers used noncovalently linked peptides, which can allow unwanted CD8{sup +} T-cell activation as a result of peptide transfer to cellular MHC molecules. To circumvent this problem, and given the role of self-reactive CD8{sup +} T cells in the development of type 1 diabetes, we designed a single-chain pMHC complex (scK{sup d}.IGRP) by using the class I MHC molecule H-2K{sup d} and a covalently linked peptide derived from islet-specific glucose-6-phosphatase catalytic subunit-related protein (IGRP{sub 206-214}), a well established autoantigen in NOD mice. X-ray diffraction studies revealed that the peptide is presented in the groove of the MHC molecule in canonical fashion, and it was also demonstrated that scK{sup d}.IGRP tetramers bound specifically to cognate CD8{sup +} T cells. Tetramer binding induced death of naive T cells and in vitro- and in vivo-differentiated cytotoxic T lymphocytes, and tetramer-treated cytotoxic T lymphocytes showed a diminished IFN-{gamma} response to antigen stimulation. Tetramer accessibility to disease-relevant T cells in vivo was also demonstrated. Our study suggests the potential of single-chain pMHC tetramers as possible therapeutic agents in autoimmune disease. Their ability to affect the fate of naive and activated CD8{sup +} T cells makes them a potential intervention strategy in early and late stages of disease.

D Samanta; G Mukherjee; U Ramagopal; R Chaparro; S Nathenson; T DiLorenzo; S Almo

2011-12-31T23:59:59.000Z

149

Flat-Plate Photovoltaic Module Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Module Basics Module Basics Flat-Plate Photovoltaic Module Basics August 20, 2013 - 4:25pm Addthis Flat-plate photovoltaic (PV) modules are made of several components, including the front surface materials, encapsulant, rear surface, and frame. Front Surface Materials The front surface of a flat-plate PV module must have a high transmission in the wavelengths that can be used by the solar cells in the module. For example, for silicon solar cells, the top surface must have high transmission of light with wavelengths from 350 to 1200 nm. Also, reflection from the front surface should be minimal. An antireflection coating added to the top surface can greatly reduce the reflection of sunlight, and texturing of the surface can cause light that strikes the surface to stay within the cells. Unfortunately, these textured

150

The Rockefeller University Press, 0021-9525/98/10/359/15 $2.00 The Journal of Cell Biology, Volume 143, Number 2, October 19, 1998 359373  

E-Print Network (OSTI)

in some detail. Both types of fusion require the cytosolic factors NSF and SNAPs (or homologues) as well, Volume 143, Number 2, October 19, 1998 359­373 http://www.jcb.org 359 Mitochondrial Fusion in Yeast, University of California, Davis, California 95616 Abstract. Membrane fusion is required to establish

Shaw, Janet M.

151

Effects of ZnO Nanoparticles on P3HT:PCBM Organic Solar Cells with DMF-Modulated PEDOT:PSS Buffer Layers  

Science Journals Connector (OSTI)

Organic solar cells based on bulk heterojunctions (BHJs) have been investigated because of their low cost, environmentally friendly production, ease of deposition, and flexible applications. ... The best performance with this cell structure produced an open-circuit voltage, Voc, of 440 mV, a short circuit c.d., Jsc, of 2.2 mA/cm2, a fill factor, FF, of 0.56, and a conversion efficiency, ?, of 0.53%. ...

Sang Hoon Oh; Seung Jin Heo; Jeong Suk Yang; Hyun Jae Kim

2013-10-31T23:59:59.000Z

152

module 4 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

module 4 module 4 HR5 TRANSITION BRIEFING module 4 More Documents & Publications Microsoft Word - Rev5functionalaccountabilityimplementationplan..doc Management (WFP) DEPARTMENT OF...

153

1204 NATURE CELL BIOLOGY VOLUME 8 | NUMBER 11 | NOVEMBER 2006 R E V I E W SYSTEMS BIOLOGY: A USER'S GUIDE  

E-Print Network (OSTI)

, and how this provides a guideline to understand cell morphogenesis as a whole. The main function the cytoskeleton have remarka- ble mechano-chemical properties that facilitate transformation of chemi- cal energy into order. To understand this, the effects of forces, transport and diffusion must be considered. None

Cai, Long

154

Module Handbook Specialisation Photovoltaics  

E-Print Network (OSTI)

solar cell Real solar cells Silicon solar cells: crystalline, multicrystalline, amorphous Cells: CdTe and CIGS technologies. Organic solar cells. Part 2: Fabrication Methods Crystal defects Theory Fabrication methods Solar cell properties Cell research and pilot productions facilities

Habel, Annegret

155

Advanced silicon photonic modulators  

E-Print Network (OSTI)

Various electrical and optical schemes used in Mach-Zehnder (MZ) silicon plasma dispersion effect modulators are explored. A rib waveguide reverse biased silicon diode modulator is designed, tested and found to operate at ...

Sorace, Cheryl M

2010-01-01T23:59:59.000Z

156

Modulating lignin in plants  

SciTech Connect

Materials and methods for modulating (e.g., increasing or decreasing) lignin content in plants are disclosed. For example, nucleic acids encoding lignin-modulating polypeptides are disclosed as well as methods for using such nucleic acids to generate transgenic plants having a modulated lignin content.

Apuya, Nestor; Bobzin, Steven Craig; Okamuro, Jack; Zhang, Ke

2013-01-29T23:59:59.000Z

157

Hydrogen Fuel Cell Engines and Related Technologies Course Manual...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Module 10: Maintenance and Fueling Facility Guidelines Module 11: Glossary and Conversions Home About the Fuel Cell Technologies Office Hydrogen Production Hydrogen Delivery...

158

Arabidopsis RADICAL-INDUCED CELL DEATH1 Belongs to the WWE Proteinâ??Protein Interaction Domain Protein Family and Modulates Abscisic Acid, Ethylene, and Methyl Jasmonate Responses  

Science Journals Connector (OSTI)

...a single ADP-ribose unit (Smith, 2001; Corda...Nottingham Arabidopsis Stock Centre ( http://nasc...concentration of 60 muM or keeping the plants at 4C in a...Nottingham Arabidopsis Stock Centre with the stock number N9354. For the...

Reetta Ahlfors; Saara Lång; Kirk Overmyer; Pinja Jaspers; Mikael Brosché; Airi Tauriainen; Hannes Kollist; Hannele Tuominen; Enric Belles-Boix; Mirva Piippo; Dirk Inzé; E. Tapio Palva; Jaakko Kangasjärvi

2004-06-18T23:59:59.000Z

159

Thermoelectrics Partnership: Automotive Thermoelectric Modules...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Solution for Automotive Thermoelectric Modules Application Thermoelectrics Partnership: Automotive Thermoelectric Modules with Scalable Thermo- and Electro-Mechanical Interfaces...

160

Influence of Number of Benzodioxan-Stilbazole-based Ancillary Ligands on Dye Packing, Photovoltage and Photocurrent in Dye-Sensitized Solar Cells  

Science Journals Connector (OSTI)

dye-sensitized solar cells; mono versus bis-electron-donor ancillary ligands; solar-to-electric conversion; IPCE; Ru(II) bipyridyl complexes ... IPCE at each wavelength was calculated using eq 1, where ISC is the short-circuit photocurrent density (mA cm–2) under monochromatic irradiation, q is the elementary charge, ? is the wavelength of incident radiation in nm and P0 is the incident radiative flux in W/m2. ... impedance spectroscopy of the voltage dependence of the internal resistance elements of DSCs. ...

Hammad Cheema; Ashraful Islam; Liyuan Han; Ahmed El-Shafei

2014-06-09T23:59:59.000Z

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

A solar module fabrication process for HALE solar electric UAVs  

SciTech Connect

We describe a fabrication process used to manufacture high power-to-weight-ratio flexible solar array modules for use on high-altitude-long-endurance (HALE) solar-electric unmanned air vehicles (UAVs). These modules have achieved power-to-weight ratios of 315 and 396 W/kg for 150{mu}m-thick monofacial and 110{mu}m-thick bifacial silicon solar cells, respectively. These calculations reflect average module efficiencies of 15.3% (150{mu}m) and 14.7% (110{mu}m) obtained from electrical tests performed by Spectrolab, Inc. under AMO global conditions at 25{degrees}C, and include weight contributions from all module components (solar cells, lamination material, bypass diodes, interconnect wires, and adhesive tape used to attach the modules to the wing). The fabrication, testing, and performance of 32 m{sup 2} of these modules will be described.

Carey, P.G.; Aceves, R.C.; Colella, N.J.; Williams, K.A. [Lawrence Livermore National Lab., CA (United States); Sinton, R.A. [Private Consultant, San Jose, CA (United States); Glenn, G.S. [Spectrolab, Inc., Sylmar, CA (United States)

1994-12-12T23:59:59.000Z

162

Development of ZnTe:Cu Contacts for CdTe Solar Cells: Cooperative Research and Development Final Report, CRADA Number CRD-08-320  

SciTech Connect

The main focus of the work at NREL was on the development of Cu-doped ZnTe contacts to CdTe solar cells in the substrate configuration. The work performed under the CRADA utilized the substrate device structure used at NREL previously. All fabrication was performed at NREL. We worked on the development of Cu-doped ZnTe as well as variety of other contacts such as Sb-doped ZnTe, CuxTe, and MoSe2. We were able to optimize the contacts to improve device parameters. The improvement was obtained primarily through increasing the open-circuit voltage, to values as high as 760 mV, leading to device efficiencies of 7%.

Dhere, R.

2012-04-01T23:59:59.000Z

163

Diospyrin derivative, an anticancer quinonoid, regulates apoptosis at endoplasmic reticulum as well as mitochondria by modulating cytosolic calcium in human breast carcinoma cells  

SciTech Connect

Highlights: Black-Right-Pointing-Pointer Diospyrin diethylether (D7) caused oxidative stress-dependent activation of PC-PLC. Black-Right-Pointing-Pointer Activated PC-PLC induced a sustained-release of Ca{sup 2+} from endoplasmic reticulum. Black-Right-Pointing-Pointer The elevated cytosolic Ca{sup +2} led to the calpain-caspase12 dependent apoptosis. Black-Right-Pointing-Pointer D7-Induced Ca{sup +2} also found to accentuate the mitochondrial pathway of apoptosis. -- Abstract: Diospyrin diethylether (D7), a bisnaphthoquinonoid derivative, exhibited an oxidative stress-dependent apoptosis in several human cancer cells and tumor models. The present study was aimed at evaluation of the increase in cytosolic calcium [Ca{sup 2+}]{sub c} leading to the apoptotic cell death triggered by D7 in MCF7 human breast carcinoma cells. A phosphotidylcholine-specific phospholipase C (PC-PLC) inhibitor, viz. U73122, and an antioxidant, viz. N-acetylcysteine, could significantly prevent the D7-induced rise in [Ca{sup 2+}]{sub c} and PC-PLC activity. Using an endoplasmic reticulum (ER)-Ca{sup 2+} mobilizer (thapsigargin) and an ER-IP3R antagonist (heparin), results revealed ER as a major source of [Ca{sup 2+}]{sub c} which led to the activation of calpain and caspase12, and cleavage of fodrin. These effects including apoptosis were significantly inhibited by the pretreatment of Bapta-AM (a cell permeable Ca{sup 2+}-specific chelator), or calpeptin (a calpain inhibitor). Furthermore, D7-induced [Ca{sup 2+}]{sub c} was found to alter mitochondrial membrane potential and induce cytochrome c release, which was inhibited by either Bapta-AM or ruthenium red (an inhibitor of mitochondrial Ca{sup 2+} uniporter). Thus, these results provided a deeper insight into the D7-induced redox signaling which eventually integrated the calcium-dependent calpain/caspase12 activation and mitochondrial alterations to accentuate the induction of apoptotic cell death.

Kumar, Binod [Department of Pharmaceutical Technology, Jadavpur University, Kolkata 700032 (India) [Department of Pharmaceutical Technology, Jadavpur University, Kolkata 700032 (India); Radiation and Cancer Biology Section, Radiation Biology and Health Sciences Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Kumar, Amit [Radiation and Cancer Biology Section, Radiation Biology and Health Sciences Division, Bhabha Atomic Research Centre, Mumbai 400085 (India)] [Radiation and Cancer Biology Section, Radiation Biology and Health Sciences Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Ghosh, Subhalakshmi [Department of Pharmaceutical Technology, Jadavpur University, Kolkata 700032 (India)] [Department of Pharmaceutical Technology, Jadavpur University, Kolkata 700032 (India); Pandey, Badri N., E-mail: bnp@barc.gov.in [Radiation and Cancer Biology Section, Radiation Biology and Health Sciences Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Mishra, Kaushala P. [Radiation and Cancer Biology Section, Radiation Biology and Health Sciences Division, Bhabha Atomic Research Centre, Mumbai 400085 (India)] [Radiation and Cancer Biology Section, Radiation Biology and Health Sciences Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Hazra, Banasri, E-mail: banasrihazra@yahoo.co.in [Department of Pharmaceutical Technology, Jadavpur University, Kolkata 700032 (India)] [Department of Pharmaceutical Technology, Jadavpur University, Kolkata 700032 (India)

2012-01-13T23:59:59.000Z

164

Assembly of opto-electronic module with improved heat sink  

DOE Patents (OSTI)

A heat sink for a transceiver optoelectronic module including dual direct heat paths and a structure which encloses a number of chips having a central web which electrically isolates transmitter and receiver chips from each other. A retainer for an optical coupler having a port into which epoxy is poured. An overmolded base for an optoelectronic module having epoxy flow controller members built thereon. Assembly methods for an optoelectronic module including gap setting and variation of a TAB bonding process.

Chan, Benson (Vestal, NY); Fortier, Paul Francis (Richelieu, CA); Freitag, Ladd William (Rochester, MN); Galli, Gary T. (Binghampton, NY); Guindon, Francois (Stukely-sud, CA); Johnson, Glen Walden (Yorktown Heights, NY); Letourneau, Martial (Granby, CA); Sherman, John H. (Lisle, NY); Tetreault, Real (Granby, CA)

2004-11-23T23:59:59.000Z

165

Electricity Market Module  

U.S. Energy Information Administration (EIA) Indexed Site

Market Module Market Module This page inTenTionally lefT blank 101 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2013 Electricity Market Module The NEMS Electricity Market Module (EMM) represents the capacity planning, dispatching, and pricing of electricity. It is composed of four submodules-electricity capacity planning, electricity fuel dispatching, electricity load and demand, and electricity finance and pricing. It includes nonutility capacity and generation, and electricity transmission and trade. A detailed description of the EMM is provided in the EIA publication, Electricity Market Module of the National Energy Modeling System 2013, DOE/EIA-M068(2013). Based on fuel prices and electricity demands provided by the other modules of the NEMS, the EMM determines the most

166

Cavity enhanced terahertz modulation  

SciTech Connect

We present a versatile concept for all optical terahertz (THz) amplitude modulators based on a Fabry-Pérot semiconductor cavity design. Employing the high reflectivity of two parallel meta-surfaces allows for trapping selected THz photons within the cavity and thus only a weak optical modulation of the semiconductor absorbance is required to significantly damp the field within the cavity. The optical switching yields to modulation depths of more than 90% with insertion efficiencies of 80%.

Born, N., E-mail: norman.born@physik.uni-marburg.de [College of Optical Sciences, University of Arizona, 1630 E University Boulevard, Tucson, Arizona 85721 (United States); Faculty of Physics and Material Sciences Center, Philipps-Universität Marburg, Renthof 5, 35032 Marburg (Germany); Scheller, M.; Moloney, J. V. [College of Optical Sciences, University of Arizona, 1630 E University Boulevard, Tucson, Arizona 85721 (United States)] [College of Optical Sciences, University of Arizona, 1630 E University Boulevard, Tucson, Arizona 85721 (United States); Koch, M. [Faculty of Physics and Material Sciences Center, Philipps-Universität Marburg, Renthof 5, 35032 Marburg (Germany)] [Faculty of Physics and Material Sciences Center, Philipps-Universität Marburg, Renthof 5, 35032 Marburg (Germany)

2014-03-10T23:59:59.000Z

167

Siemens SOFC Test Article and Module Design  

SciTech Connect

Preliminary design studies of the 95 kWe-class SOFC test article continue resulting in a stack architecture of that is 1/3 of 250 kWe-class SOFC advanced module. The 95 kWeclass test article is envisioned to house 20 bundles (eight cells per bundle) of Delta8 cells with an active length of 100 cm. Significant progress was made in the conceptual design of the internal recirculation loop. Flow analyses were initiated in order to optimize the bundle row length for the 250 kWeclass advanced module. A preferred stack configuration based on acceptable flow and thermal distributions was identified. Potential module design and analysis issues associated with pressurized operation were identified.

None

2011-03-31T23:59:59.000Z

168

Photovoltaic module with light reflecting backskin  

DOE Patents (OSTI)

A photovoltaic module comprises electrically interconnected and mutually spaced photovoltaic cells that are encapsulated by a light-transmitting encapsulant between a light-transparent front cover and a back cover, with the back cover sheet being an ionomer/nylon alloy embossed with V-shaped grooves running in at least two directions and coated with a light reflecting medium so as to provide light-reflecting facets that are aligned with the spaces between adjacent cells and oriented so as to reflect light falling in those spaces back toward said transparent front cover for further internal reflection onto the solar cells, whereby substantially all of the reflected light will be internally reflected from said cover sheet back to the photovoltaic cells, thereby increasing the current output of the module. The internal reflector improves power output by as much as 67%.

Gonsiorawski, Ronald C. (Danvers, MA)

2007-07-03T23:59:59.000Z

169

Large-Scale PV Module Manufacturing Using Ultra-Thin Polycrystalline Silicon Solar Cells: Final Subcontract Report, 1 April 2002--28 February 2006  

SciTech Connect

The major objectives of this program were to continue advances of BP Solar polycrystalline silicon manufacturing technology. The Program included work in the following areas. (1) Efforts in the casting area to increase ingot size, improve ingot material quality, and improve handling of silicon feedstock as it is loaded into the casting stations. (2) Developing wire saws to slice 100-..mu..m-thick silicon wafers on 290-..mu..m-centers. (3) Developing equipment for demounting and subsequent handling of very thin silicon wafers. (4) Developing cell processes using 100-..mu..m-thick silicon wafers that produce encapsulated cells with efficiencies of at least 15.4% at an overall yield exceeding 95%. (5) Expanding existing in-line manufacturing data reporting systems to provide active process control. (6) Establishing a 50-MW (annual nominal capacity) green-field Mega-plant factory model template based on this new thin polycrystalline silicon technology. (7) Facilitating an increase in the silicon feedstock industry's production capacity for lower-cost solar-grade silicon feedstock..

Wohlgemuth, J.; Narayanan, M.

2006-07-01T23:59:59.000Z

170

Detailed Course Module Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Course Module Description Course Module Description Module/Learning Objectives Level of Detail in Module by Audience Consumers Gen Ed/ Community College Trades 1. Energy Issues and Building Solutions High High High Learning Objectives: * Define terms of building science, ecological systems, economics of consumption * Relate building science perspective, ecology, social science * Explain historical energy and environmental issues related to buildings * Compare Site and source energy * Examine the health, safety and comfort issues in buildings * Examine the general context for building solutions (zero energy green home with durability as the goal) * Explain a basic overview of alternative energy (total solar flux) - do we have enough energy * Examine cash flow to homeowners

171

Bracket for photovoltaic modules  

DOE Patents (OSTI)

Brackets for photovoltaic ("PV") modules are described. In one embodiment, a saddle bracket has a mounting surface to support one or more PV modules over a tube, a gusset coupled to the mounting surface, and a mounting feature coupled to the gusset to couple to the tube. The gusset can have a first leg and a second leg extending at an angle relative to the mounting surface. Saddle brackets can be coupled to a torque tube at predetermined locations. PV modules can be coupled to the saddle brackets. The mounting feature can be coupled to the first gusset and configured to stand the one or more PV modules off the tube.

Ciasulli, John; Jones, Jason

2014-06-24T23:59:59.000Z

172

Integrated LED Headlamp Module  

Science Journals Connector (OSTI)

LED headlamp module integrates all necessary optics, electronics, and heat management into one compact unit that fits into standard mechanical headlamp frame. It provides high beam,...

Popelek, Jan

173

Comparison of Predictive Models for Photovoltaic Module Performance: Preprint  

SciTech Connect

This paper examines three models used to estimate the performance of photovoltaic (PV) modules when the irradiances and PV cell temperatures are known. The results presented here were obtained by comparing modeled and measured maximum power (Pm) for PV modules that rely on different technologies.

Marion, B.

2008-05-01T23:59:59.000Z

174

Opportunities and Challenges for Power Electronics in PV Modules (Presentation)  

SciTech Connect

The presentation describes the value of adding DC converters and other power electronics to modules to improve their output even when shading or bad cells would otherwise decrease the module output. The presentation was part of a workshop sponsored by ARPA-E exploring the opportunities for power electronics to support PV applications.

Kurtz, S.; Deline, C.; Wohlgemuth, J.; Marion, B.; Granata, J.

2011-02-01T23:59:59.000Z

175

Module title Marketing Management Module code INT3602  

E-Print Network (OSTI)

Module title Marketing Management Module code INT3602 Academic year(s) 2013/4 Credits 15 Basic - summary of the module content Module description This module will introduce new marketing students to the fascinating world of modern marketing in an innovative and comprehensive yet practical and enjoyable way

Mumby, Peter J.

176

SPRNG Parallel Random Number Generators at NERSC  

NLE Websites -- All DOE Office Websites (Extended Search)

SPRNG SPRNG SPRNG Description The SPRNG libraries of generators produce good quality random numbers, and are also fast. They have been subjected to some of the largest random number tests, with around 10^13 RNs per test. SPRNG provides both FORTRAN and C (also C++) interfaces for the use of the parallel random number generators. Access SPRNG v2.0 is available on Carver (gcc, intel and pgi) and Cray systems (pgi and cce). Use the module utility to load the software. module load sprng Using SPRNG On Cray systems: ftn sprng_test.F $SPRNG -lsprng On Carver: mpif90 sprng_test.F $SPRNG -lsprng Documentation On Carver there are various documents in $SPRNG/DOCS and various examples in $SPRNG/EXAMPLES. See the SPRNG web site at Florida State University for complete details. For help using SPRNG at NERSC contact the

177

Artificial Neural Network Modeling of a Photovoltaic Module  

Science Journals Connector (OSTI)

This paper deals with the problem of designing an accurate and computationally fast model of a particular real photovoltaic module. There are a number of well known theoretical models, but they need the fine tuni...

Jose Manuel López-Guede…

2014-01-01T23:59:59.000Z

178

Working with Modules within Python  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with Modules within Perl and Python Working with Modules within Perl and Python Working with Modules within Perl and Python It can often be convenient to work with the modules system from within perl or python scripts. You can do this! Using Modules within Python The EnvironmentModules python package gives access to the module system from within python. The EnvironmentModules python package has a single function: module. Using this function you can provide the same arguments you would to "module" on the command line. The module() function accepts a list of arguments, like ['load','']; or ['unload','']. >>> import EnvironmentModules as EnvMod >>> EnvMod.module(['load','blast+']) It is important to understand that this is most effective for scripts

179

Membrane module assembly  

DOE Patents (OSTI)

A membrane module assembly is described which is adapted to provide a flow path for the incoming feed stream that forces it into prolonged heat-exchanging contact with a heating or cooling mechanism. Membrane separation processes employing the module assembly are also disclosed. The assembly is particularly useful for gas separation or pervaporation. 2 figures.

Kaschemekat, J.

1994-03-15T23:59:59.000Z

180

Ultrafast population dynamics in electrically modulated terahertz quantum cascade lasers  

Science Journals Connector (OSTI)

The ultrafast population dynamics in electrically modulated three-well terahertz quantum cascade lasers (QCLs) is studied by using the self-consistent Bloch–Poisson equations. In the modulation process, the non-equilibrium oscillations of the population inversion are found before the population equilibrium recovers. The equilibrium formation time increases nonlinearly with the period number. This phenomenon stems from the non-uniform distribution of the electric potential. In different periods, different responses to the electrical modulation are also explored. An in-depth understanding of electron transport in the cascade structure is obtained. Finally, we demonstrate the feasibility of a modulation frequency up to gigahertz in terahertz QCLs.

F Wang; X G Guo; C Wang; J C Cao

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Telecommunications International Cell Phone  

E-Print Network (OSTI)

Telecommunications International Cell Phone 1. Fax completed form to 979.847.1111. 2. If you do will be charged. Date Cell Phone Needed Cell Phone Pick-Up Date Cell Phone User Travel Destination(s) United States Number Destination Country Number Cell Phone Type Digital Satellite Cell Phone Return Date Notes

182

Combined hairpin-antisense compositions and methods for modulating expression  

DOE Patents (OSTI)

A nucleotide construct comprising a nucleotide sequence that forms a stem and a loop, wherein the loop comprises a nucleotide sequence that modulates expression of a target, wherein the stem comprises a nucleotide sequence that modulates expression of a target, and wherein the target modulated by the nucleotide sequence in the loop and the target modulated by the nucleotide sequence in the stem may be the same or different. Vectors, methods of regulating target expression, methods of providing a cell, and methods of treating conditions comprising the nucleotide sequence are also disclosed.

Shanklin, John; Nguyen, Tam

2014-08-05T23:59:59.000Z

183

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

2 2 Industrial Demand Module The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 15 manufacturing and 6 non-manufacturing industries. The manufacturing industries are further subdivided into the energy- intensive manufacturing industries and non-energy-intensive manufacturing industries (Table 6.1). The manufacturing industries are modeled through the use of a detailed process-flow or end-use accounting procedure, whereas the non- manufacturing industries are modeled with substantially less detail. The petroleum refining industry is not included in the Industrial Demand Module, as it is simulated separately in the Petroleum Market Module of NEMS. The Industrial Demand Module calculates energy consumption for the four Census Regions (see Figure 5) and disaggregates the energy consumption

184

International Energy Module  

Gasoline and Diesel Fuel Update (EIA)

he International Energy Module determines changes in the world oil price and the supply prices of crude he International Energy Module determines changes in the world oil price and the supply prices of crude oils and petroleum products for import to the United States in response to changes in U.S. import requirements. A market clearing method is used to determine the price at which worldwide demand for oil is equal to the worldwide supply. The module determines new values for oil production and demand for regions outside the United States, along with a new world oil price that balances supply and demand in the international oil market. A detailed description of the International Energy Module is provided in the EIA publication, Model Documentation Report: The International Energy Module of the National Energy Modeling System, DOE/EIA-M071(06), (Washington, DC, February 2006).

185

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

This page intentionally left blank This page intentionally left blank 51 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 Industrial Demand Module The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 15 manufacturing and 6 non-manufacturing industries. The manufacturing industries are further subdivided into the energy- intensive manufacturing industries and nonenergy-intensive manufacturing industries (Table 6.1). The manufacturing industries are modeled through the use of a detailed process-flow or end-use accounting procedure, whereas the non- manufacturing industries are modeled with substantially less detail. The petroleum refining industry is not included in the Industrial Module, as it is simulated separately in the Petroleum Market Module of NEMS. The Industrial Module calculates

186

Photovoltaic module and interlocked stack of photovoltaic modules  

DOE Patents (OSTI)

One embodiment relates to an arrangement of photovoltaic modules configured for transportation. The arrangement includes a plurality of photovoltaic modules, each photovoltaic module including a frame. A plurality of individual male alignment features and a plurality of individual female alignment features are included on each frame. Adjacent photovoltaic modules are interlocked by multiple individual male alignment features on a first module of the adjacent photovoltaic modules fitting into and being surrounded by corresponding individual female alignment features on a second module of the adjacent photovoltaic modules. Other embodiments, features and aspects are also disclosed.

Wares, Brian S.

2014-09-02T23:59:59.000Z

187

Assumptions to the Annual Energy Outlook 2002 - Residential Demand Module  

Gasoline and Diesel Fuel Update (EIA)

Residential Demand Module Residential Demand Module The NEMS Residential Demand Module forecasts future residential sector energy requirements based on projections of the number of households and the stock, efficiency, and intensity of use of energy-consuming equipment. The Residential Demand Module projections begin with a base year estimates of the housing stock, the types and numbers of energy-consuming appliances servicing the stock, and the “unit energy consumption” by appliance (or UEC—in million Btu per household per year). The projection process adds new housing units to the stock, determines the equipment installed in new units, retires existing housing units, and retires and replaces appliances. The primary exogenous drivers for the module are housing starts by type (single-family, multifamily and mobile homes) and

188

Assumptions to the Annual Energy Outlook 2001 - Residential Demand Module  

Gasoline and Diesel Fuel Update (EIA)

Residential Demand Module Residential Demand Module The NEMS Residential Demand Module forecasts future residential sector energy requirements based on projections of the number of households and the stock, efficiency, and intensity of use of energy-consuming equipment. The Residential Demand Module projections begin with a base year estimates of the housing stock, the types and numbers of energy-consuming appliances servicing the stock, and the “unit energy consumption” by appliance (or UEC—in million Btu per household per year). The projection process adds new housing units to the stock, determines the equipment installed in new units, retires existing housing units, and retires and replaces appliances. The primary exogenous drivers for the module are housing starts by type (single-family, multifamily and mobile homes) and

189

Modulational instability of electromagnetic waves in a collisional quantum magnetoplasma  

SciTech Connect

The modulational instability of right-hand circularly polarized electromagnetic electron cyclotron (CPEM-EC) wave in a magnetized quantum plasma is studied taking into account the collisional effects. Employing quantum hydrodynamic and nonlinear Schrödinger equations, the dispersion relation of modulated CPEM-EC wave in a collisional plasma has been derived. It is found that this wave is unstable in such a plasma system and the growth rate of the associated instability depends on various parameters such as electron Fermi temperature, plasma number density, collision frequency, and modulation wavenumber. It is shown that while the increase of collision frequency leads to increase of the growth rate of instability, especially at large wavenumber limit, the increase of plasma number density results in more stable modulated CPEM-EC wave. It is also found that in contrast to collisionless plasma in which modulational instability is restricted to small wavenumbers, in collisional plasma, the interval of instability occurrence can be extended to a large domain.

Niknam, A. R., E-mail: a-niknam@sbu.ac.ir [Laser and Plasma Research Institute, Shahid Beheshti University, G.C., Tehran (Iran, Islamic Republic of); Rastbood, E.; Bafandeh, F.; Khorashadizadeh, S. M., E-mail: smkhorashadi@birjand.ac.ir [Physics Department of Birjand University, Birjand (Iran, Islamic Republic of)

2014-04-15T23:59:59.000Z

190

Module bay with directed flow  

DOE Patents (OSTI)

A module bay requires less cleanroom airflow. A shaped gas inlet passage can allow cleanroom air into the module bay with flow velocity preferentially directed toward contaminant rich portions of a processing module in the module bay. Preferential gas flow direction can more efficiently purge contaminants from appropriate portions of the module bay, allowing a reduced cleanroom air flow rate for contaminant removal. A shelf extending from an air inlet slit in one wall of a module bay can direct air flowing therethrough toward contaminant-rich portions of the module bay, such as a junction between a lid and base of a processing module.

Torczynski, John R. (Albuquerque, NM)

2001-02-27T23:59:59.000Z

191

Optical Modulation of Molecular Conductance  

NLE Websites -- All DOE Office Websites (Extended Search)

Optical Modulation of Molecular Conductance Authors: Battacharyya, S., Kibel, A., Kodis, G., Liddell, P. A., Gervaldo, M., Gust, D., and Lindsay, S. Title: Optical Modulation of...

192

Commercial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

2 2 Commercial Demand Module The NEMS Commercial Sector Demand Module generates projections of commercial sector energy demand through 2035. The definition of the commercial sector is consistent with EIA's State Energy Data System (SEDS). That is, the commercial sector includes business establishments that are not engaged in transportation or in manufacturing or other types of industrial activity (e.g., agriculture, mining or construction). The bulk of commercial sector energy is consumed within buildings; however, street lights, pumps, bridges, and public services are also included if the establishment operating them is considered commercial. Since most of commercial energy consumption occurs in buildings, the commercial module relies on the data from the EIA

193

Sonication standard laboratory module  

DOE Patents (OSTI)

A standard laboratory module for automatically producing a solution of cominants from a soil sample. A sonication tip agitates a solution containing the soil sample in a beaker while a stepper motor rotates the sample. An aspirator tube, connected to a vacuum, draws the upper layer of solution from the beaker through a filter and into another beaker. This beaker can thereafter be removed for analysis of the solution. The standard laboratory module encloses an embedded controller providing process control, status feedback information and maintenance procedures for the equipment and operations within the standard laboratory module.

Beugelsdijk, Tony (Los Alamos, NM); Hollen, Robert M. (Los Alamos, NM); Erkkila, Tracy H. (Los Alamos, NM); Bronisz, Lawrence E. (Los Alamos, NM); Roybal, Jeffrey E. (Santa Fe, NM); Clark, Michael Leon (Menan, ID)

1999-01-01T23:59:59.000Z

194

The shortest modulation period Blazhko RR Lyrae star: SS Cnc  

E-Print Network (OSTI)

Extended BV(RI)c CCD observations of SS Cnc, a short period RRab star are presented. Nearly 1400 data points in each band have been obtained spanning over 79 days during the spring of 2005. The star exhibits light curve modulation, the so called Blazhko effect with small amplitude (B maximum brightness varies 0.1 mag) and with the shortest modulation period (5.309 d) ever observed. In the Fourier spectrum of the V light curve the pulsation frequency components are detected up to the 24th harmonic order, and modulation side lobe frequencies with significantly asymmetric amplitudes are seen up to the 15th and 9th orders for the lower and higher frequency components, respectively. Detailed comparison of the modulation behavior of SS Cnc and RR Gem, the two recently discovered small amplitude, short modulation period Blazhko stars is presented. The modulation frequency (f_m) appears in the Fourier spectrum of both stars with similar amplitude. We also demonstrate that the modulation frequencies have basically different properties as the pulsation and modulation side lobe frequencies have, indicating that the physics behind these frequency components are not the same. The discovery of small amplitude modulations of RRab stars cautions that the large photometric surveys (MACHO, OGLE) may seriously underestimate the number of modulated RR Lyrae stars.

J. Jurcsik; B. Szeidl; Á. Sódor; I. Dékány; Zs. Hurta; K. Posztobányi; K. Vida; M. Váradi; A. Szing

2006-03-20T23:59:59.000Z

195

Module Title: Project Module Code: OPTO6005  

E-Print Network (OSTI)

Ibsen, Dr Ping Hua, Prof James Wilkinson Contact (email ID) sm@orc.soton.ac.uk, mi@orc.soton.ac.uk, ph2@orc.soton.ac.uk, jsw@orc.soton.ac.uk Is the module subject to external accreditation? No If yes and optical labs of the ORC 3. Train in technical and hands-on research skills to gain technical insight

Anderson, Jim

196

RESTRICTED MODULES AND CONJECTURES FOR MODULES OF CONSTANT JORDAN TYPE  

E-Print Network (OSTI)

RESTRICTED MODULES AND CONJECTURES FOR MODULES OF CONSTANT JORDAN TYPE SEMRA ¨OZT¨URK KAPTANO GLU give a method to construct new restricted k[E]-modules of constant Jordan type from k[E]-modules of constant Jordan type and use it to realize several Jordan types. The constraints on the Jordan type

Kaptanoglu, Semra Ozturk

197

RESTRICTED MODULES AND CONJECTURES FOR MODULES OF CONSTANT JORDAN TYPE  

E-Print Network (OSTI)

RESTRICTED MODULES AND CONJECTURES FOR MODULES OF CONSTANT JORDAN TYPE SEMRA ¨OZT¨URK KAPTANO GLU Abstract. We introduce the class of restricted k[A]-modules and pt-Jordan types for a finite abelian p on Jordan types for modules of constant Jordan type when t is 1. We state conjectures giving constraints

Kaptanoglu, Semra Ozturk

198

Procedures in Modules (1) Including all procedures within modules  

E-Print Network (OSTI)

Procedures in Modules (1) Including all procedures within modules works very well in almost all designing these if possible #12;Procedures in Modules (2) These are very much like internal procedures Works very well in almost all programs Everything accessible in the module can also be used in the procedure

199

Electricity Market Module  

Gasoline and Diesel Fuel Update (EIA)

This page inTenTionally lefT blank 91 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2012 Electricity Market Module The NEMS Electricity Market Module (EMM) represents the capacity planning, dispatching, and pricing of electricity. It is composed of four submodules-electricity capacity planning, electricity fuel dispatching, electricity load and demand, and electricity finance and pricing. It includes nonutility capacity and generation, and electricity transmission and trade. A detailed description of the EMM is provided in the EIA publication, Electricity Market Module of the National Energy Modeling System 2012, DOE/EIA-M068(2012). Based on fuel prices and electricity demands provided by the other modules of the NEMS, the EMM determines the most

200

Liquid Fuels Market Module  

U.S. Energy Information Administration (EIA) Indexed Site

Liquid Fuels Market Module Liquid Fuels Market Module This page inTenTionally lefT blank 145 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2013 Liquid Fuels Market Module The NEMS Liquid Fuels Market Module (LFMM) projects petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil (both domestic and imported), petroleum product imports, unfinished oil imports, other refinery inputs (including alcohols, ethers, esters, corn, biomass, and coal), natural gas plant liquids production, and refinery processing gain. In addition, the LFMM projects capacity expansion and fuel consumption at domestic refineries. The LFMM contains a linear programming (LP) representation of U.S. petroleum refining

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Electricity Market Module  

Gasoline and Diesel Fuel Update (EIA)

This page intentionally left blank This page intentionally left blank 95 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 Electricity Market Module The NEMS Electricity Market Module (EMM) represents the capacity planning, dispatching, and pricing of electricity. It is composed of four submodules-electricity capacity planning, electricity fuel dispatching, electricity load and demand, and electricity finance and pricing. It includes nonutility capacity and generation, and electricity transmission and trade. A detailed description of the EMM is provided in the EIA publication, Electricity Market Module of the National Energy Modeling System 2011, DOE/EIA-M068(2011). Based on fuel prices and electricity demands provided by the other modules of the NEMS, the EMM determines the most

202

Digital optical conversion module  

DOE Patents (OSTI)

A digital optical conversion module used to convert an analog signal to a computer compatible digital signal including a voltage-to-frequency converter, frequency offset response circuitry, and an electrical-to-optical converter. Also used in conjunction with the digital optical conversion module is an optical link and an interface at the computer for converting the optical signal back to an electrical signal. Suitable for use in hostile environments having high levels of electromagnetic interference, the conversion module retains high resolution of the analog signal while eliminating the potential for errors due to noise and interference. The module can be used to link analog output scientific equipment such as an electrometer used with a mass spectrometer to a computer.

Kotter, Dale K. (North Shelley, ID); Rankin, Richard A. (Ammon, ID)

1991-02-26T23:59:59.000Z

203

Digital optical conversion module  

DOE Patents (OSTI)

A digital optical conversion module used to convert an analog signal to a computer compatible digital signal including a voltage-to-frequency converter, frequency offset response circuitry, and an electrical-to-optical converter. Also used in conjunction with the digital optical conversion module is an optical link and an interface at the computer for converting the optical signal back to an electrical signal. Suitable for use in hostile environments having high levels of electromagnetic interference, the conversion module retains high resolution of the analog signal while eliminating the potential for errors due to noise and interference. The module can be used to link analog output scientific equipment such as an electrometer used with a mass spectrometer to a computer. 2 figs.

Kotter, D.K.; Rankin, R.A.

1988-07-19T23:59:59.000Z

204

Absorbance modulation optical lithography  

E-Print Network (OSTI)

In this thesis, the concept of absorbance-modulation optical lithography (AMOL) is described, and the feasibility experimentally verified. AMOL is an implementation of nodal lithography, which is not bounded by the diffraction ...

Tsai, Hsin-Yu Sidney

2007-01-01T23:59:59.000Z

205

Renewable Fuels Module This  

U.S. Energy Information Administration (EIA) Indexed Site

Fuels Module Fuels Module This page inTenTionally lefT blank 175 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2013 Renewable Fuels Module The NEMS Renewable Fuels Module (RFM) provides natural resources supply and technology input information for projections of new central-station U.S. electricity generating capacity using renewable energy resources. The RFM has seven submodules representing various renewable energy sources: biomass, geothermal, conventional hydroelectricity, landfill gas, solar thermal, solar photovoltaics, and wind [1]. Some renewables, such as landfill gas (LFG) from municipal solid waste (MSW) and other biomass materials, are fuels in the conventional sense of the word, while others, such as water, wind, and solar radiation, are energy sources that do not involve

206

Boosting Accuracy of Testing Multijunction Solar Cells (Fact...  

NLE Websites -- All DOE Office Websites (Extended Search)

performance. Researchers from the National Renewable Energy Laboratory's (NREL) Photovoltaic Cell and Module Characterization group, in conjunction with Spectrolab, Inc.,...

207

Regulation of Numbers of Intracellular Algae  

Science Journals Connector (OSTI)

...Regulation of Numbers of Intracellular Algae L. Muscatine R. R. Pool Members of three classes of unicellular algae have exploited an intracellular habitat...is poorly understood. Steady-state algae:host cell ratios might be achieved by...

1979-01-01T23:59:59.000Z

208

Tumor volume changes on serial imaging with megavoltage CT for non-small-cell lung cancer during intensity-modulated radiotherapy: How reliable, consistent, and meaningful is the effect?  

SciTech Connect

Purpose: Adaptive radiotherapy allows treatment plan modification based on data obtained during treatment. Assessing volume changes during treatment is now possible with intratreatment imaging capabilities on radiotherapy devices. This study assesses non-small-cell lung cancer (NSCLC) volume changes during treatment with conformal intensity-modulated radiotherapy by evaluating serial megavoltage computed tomography (MVCT) scans, with a specific emphasis on the frequency, reliability, and meaningfulness of these changes. Methods and Materials: Megavoltage CTs were retrospectively reviewed for 25 patients treated with the TomoTherapy Hi-Art system at University of Wisconsin. Twenty-one patients received definitive radiotherapy, 4 with extracranial stereotactic radioablation (60 Gy in five fractions) and 17 on a dose-per-fraction escalation protocol (57-80.5 Gy in 25 fractions). Four patients were treated palliatively (22-30 Gy in 8 to 10 fractions). Gross tumor volumes were contoured on serial MVCTs at weekly intervals. Each patient had 4 to 25 scans, including at least one at the beginning, midway, and one at the end of treatment. Results: At completion of treatment, no patient demonstrated a complete response. Partial response occurred in 3 (12%) and marginal response was noted in 5 (20%). The remaining 17 patients (68%) showed stable disease. The minimum 'scorable threshold' for volume discrepancy between scans to account for interscan assessment variability was set at >25% volume change; 10 patients (40%) had >25% tumor regression. None of the patients treated ablatively or palliatively showed tumor regression during treatment. Conclusions: Although gross tumor regression during treatment may be objectively measured using MVCTs, substantial volumetric decrease occurs only in a minority. The clinical significance of this regression is questionable, because there is no way to document histologic tumor clearance, and therefore field reductions during radiotherapy cannot be recommended.

Siker, Malika L. [Department of Human Oncology, University of Wisconsin School of Medicine and Public Health, Madison, WI (United States); Tome, Wolfgang A. [Department of Human Oncology, University of Wisconsin School of Medicine and Public Health, Madison, WI (United States); Mehta, Minesh P. [Department of Human Oncology, University of Wisconsin School of Medicine and Public Health, Madison, WI (United States)]. E-mail: Mehta@humonc.wisc.edu

2006-09-01T23:59:59.000Z

209

E-Print Network 3.0 - activity blocks cell Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

PV cell output current dependence on shading. Measuring current... when of solar cell is covered MATERIALS PV Cell Module ... Source: Oregon, University of - Solar Radiation...

210

Assumptions to the Annual Energy Outlook - Residential Demand Module  

Gasoline and Diesel Fuel Update (EIA)

Residential Demand Module Residential Demand Module Assumption to the Annual Energy Outlook Residential Demand Module The NEMS Residential Demand Module forecasts future residential sector energy requirements based on projections of the number of households and the stock, efficiency, and intensity of use of energy-consuming equipment. The Residential Demand Module projections begin with a base year estimates of the housing stock, the types and numbers of energy-consuming appliances servicing the stock, and the “unit energy consumption” by appliance (or UEC—in million Btu per household per year). The projection process adds new housing units to the stock, determines the equipment installed in new units, retires existing housing units, and retires and replaces appliances. The primary exogenous drivers for the module are housing starts by type (single-family, multifamily and mobile homes) and Census Division and prices for each energy source for each of the nine Census Divisions (see Figure 5). The Residential Demand Module also requires projections of available equipment and their installed costs over the forecast horizon. Over time, equipment efficiency tends to increase because of general technological advances and also because of Federal and/or state efficiency standards. As energy prices and available equipment changes over the forecast horizon, the module includes projected changes to the type and efficiency of equipment purchased as well as projected changes in the usage intensity of the equipment stock.

211

Nonlocal Modulation of Entangled Photons  

E-Print Network (OSTI)

We consider ramifications of the use of high speed light modulators to questions of correlation and measurement of time-energy entangled photons. Using phase modulators, we find that temporal modulation of one photon of an entangled pair, as measured by correlation in the frequency domain, may be negated or enhanced by modulation of the second photon. Using amplitude modulators we describe a Fourier technique for measurement of biphoton wave functions with slow detectors.

S. E. Harris

2008-08-06T23:59:59.000Z

212

Elements of number theory  

E-Print Network (OSTI)

The dissertation argues for the necessity of a morphosemantic theory of number, that is, a theory of number serviceable both to semantics and morphology. The basis for this position, and the empirical core of the dissertation, ...

Harbour, Daniel, 1975-

2003-01-01T23:59:59.000Z

213

Solar Cell Modules With Improved Backskin  

DOE Patents (OSTI)

The present invention relates to gas turbines and more particularly to a device for controlling the flow of cooling air through a flowpath in a turbine blade. The device can be inserted in the inlet opening of the blade flowpath and be retained therein. The device comprises a plug member for adjusting the flow of cooling air through the flowpath. The plug member comprises a retaining portion for retaining the plug member at the inlet opening of the flowpath and a blocking portion inserted within the flowpath for reducing the cross-sectional area of the inlet opening. Such a device is inexpensive and can be easily inserted in the inlet opening of a blade flowpath and retained therein.

Chevrefils, Andre (Chateauguay, CA); Grigore, Daniel Gheorghe (Pointe Claire, CA)

2001-01-23T23:59:59.000Z

214

Allosteric Modulation of DNA by Small Molecules  

NLE Websites -- All DOE Office Websites (Extended Search)

Allosteric Modulation of DNA by Small Allosteric Modulation of DNA by Small Molecules Signals originating at the cell surface are conveyed by a complex system of interconnected signaling pathways to the nucleus. They converge at transcription factors, which in turn regulate the transcription of sets of genes that result in the gene expression. Many human diseases are caused by dysregulated gene expression and the oversupply of transcription factors may be required for the growth and metastatic behavior of human cancers. Cell permeable small molecules that can be programmed to disrupt transcription factor-DNA interfaces could silence aberrant gene expression pathways. Pyrrole-imidazole polyamides are DNA minor groove binding small molecules that are programmable for a large repertoire of DNA motifs.

215

Approved Module Information for ME2011, 2014/5 Module Title/Name: Thermodynamics and Fluids Module Code: ME2011  

E-Print Network (OSTI)

Approved Module Information for ME2011, 2014/5 Module Title/Name: Thermodynamics and Fluids Module Code: ME2011 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module in which available: BEng/MEng Mechanical Engineering. BEng/MEng Electromechanical Engineering. Available

Neirotti, Juan Pablo

216

Commercial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

4 4 The commercial module forecasts consumption by fuel 15 at the Census division level using prices from the NEMS energy supply modules, and macroeconomic variables from the NEMS Macroeconomic Activity Module (MAM), as well as external data sources (technology characterizations, for example). Energy demands are forecast for ten end-use services 16 for eleven building categories 17 in each of the nine Census divisions (see Figure 5). The model begins by developing forecasts of floorspace for the 99 building category and Census division combinations. Next, the ten end-use service demands required for the projected floorspace are developed. The electricity generation and water and space heating supplied by distributed generation and combined heat and power technologies are projected. Technologies are then

217

Macroeconomic Activity Module  

Gasoline and Diesel Fuel Update (EIA)

This page intentionally left blank This page intentionally left blank 19 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook2011 Macroeconomic Activity Module The Macroeconomic Activity Module (MAM) represents the interaction between the U.S. economy as a whole and energy markets. The rate of growth of the economy, measured by the growth in gross domestic product (GDP) is a key determinant of the growth in demand for energy. Associated economic factors, such as interest rates and disposable income, strongly influence various elements of the supply and demand for energy. At the same time, reactions to energy markets by the aggregate economy, such as a slowdown in economic growth resulting from increasing energy prices, are also reflected in this module.

218

Coal Market Module This  

Gasoline and Diesel Fuel Update (EIA)

51 51 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2012 Coal Market Module The NEMS Coal Market Module (CMM) provides projections of U.S. coal production, consumption, exports, imports, distribution, and prices. The CMM comprises three functional areas: coal production, coal distribution, and coal exports. A detailed description of the CMM is provided in the EIA publication, Coal Market Module of the National Energy Modeling System 2012, DOE/EIA-M060(2012) (Washington, DC, 2012). Key assumptions Coal production The coal production submodule of the CMM generates a different set of supply curves for the CMM for each year of the projection. Forty-one separate supply curves are developed for each of 14 supply regions, nine coal types (unique combinations

219

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 12 manufacturing and 6 nonmanufacturing industries. The manufacturing industries are further subdivided into the energy-intensive manufacturing industries and nonenergy-intensive manufacturing industries. The manufacturing industries are modeled through the use of a detailed process flow or end use accounting procedure, whereas the nonmanufacturing industries are modeled with substantially less detail (Table 17). The Industrial Demand Module forecasts energy consumption at the four Census region level (see Figure 5); energy consumption at the Census Division level is estimated by allocating the Census region forecast using the SEDS 27 data.

220

Coal Market Module  

Gasoline and Diesel Fuel Update (EIA)

page intentionally left blank page intentionally left blank 153 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 Coal Market Module The NEMS Coal Market Module (CMM) provides projections of U.S. coal production, consumption, exports, imports, distribution, and prices. The CMM comprises three functional areas: coal production, coal distribution, and coal exports. A detailed description of the CMM is provided in the EIA publication, Coal Market Module of the National Energy Modeling System 2011, DOE/EIA-M060(2011) (Washington, DC, 2011). Key assumptions Coal production The coal production submodule of the CMM generates a different set of supply curves for the CMM for each year of the projection. Forty-one separate supply curves are developed for each of 14 supply regions, nine coal types (unique combinations

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Power module assembly  

DOE Patents (OSTI)

A power module assembly of the type suitable for deployment in a vehicular power inverter, wherein the power inverter has a grounded chassis, is provided. The power module assembly comprises a conductive base layer electrically coupled to the chassis, an insulating layer disposed on the conductive base layer, a first conductive node disposed on the insulating layer, a second conductive node disposed on the insulating layer, wherein the first and second conductive nodes are electrically isolated from each other. The power module assembly also comprises a first capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the first conductive node, and further comprises a second capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the second conductive node.

Campbell, Jeremy B. (Torrance, CA); Newson, Steve (Redondo Beach, CA)

2011-11-15T23:59:59.000Z

222

Modulbeschreibung Titel des Moduls  

E-Print Network (OSTI)

(Hrsg.), Advanced Characterization Techniques for Thin Film Solar Cells, Wiley VCH, Berlin Zugeordnete

Wichmann, Felix

223

Floatable solar heat modules  

SciTech Connect

A floating solar heat module for swimming pools comprises a solid surface for conducting heat from the sun's rays to the water and further includes a solid heat storage member for continual heating even during the night. A float is included to maintain the solar heat module on the surface of the pool. The solid heat storage medium is a rolled metal disk which is sandwiched between top and bottom heat conducting plates, the top plate receiving the heat of the sun's rays through a transparent top panel and the bottom plate transferring the heat conducted through the top plate and rolled disk to the water.

Ricks, J.W.

1981-09-29T23:59:59.000Z

224

Test-to-Failure of Crystalline Silicon Modules: Preprint  

SciTech Connect

Accelerated lifetime testing of five crystalline silicon module designs was carried out according to the Terrestrial Photovoltaic Module Accelerated Test-to-Failure Protocol. This protocol compares the reliability of various module constructions on a quantitative basis. The modules under test are subdivided into three accelerated lifetime testing paths: 85..deg..C/85% relative humidity with system bias, thermal cycling between ?40..deg..C and 85..deg..C, and a path that alternates between damp heat and thermal cycling. The most severe stressor is damp heat with system bias applied to simulate the voltages that modules experience when connected in an array. Positive 600 V applied to the active layer with respect to the grounded module frame accelerates corrosion of the silver grid fingers and degrades the silicon nitride antireflective coating on the cells. Dark I-V curve fitting indicates increased series resistance and saturation current around the maximum power point; however, an improvement in junction recombination characteristics is obtained. Shunt paths and cell-metallization interface failures are seen developing in the silicon cells as determined by electroluminescence, thermal imaging, and I-V curves in the case of negative 600 V bias applied to the active layer. Ability to withstand electrolytic corrosion, moisture ingress, and ion drift under system voltage bias are differentiated.

Hacke, P.; Terwilliger, K.; Glick, S.; Trudell, D.; Bosco, N.; Johnston, S.; Kurtz, S. R.

2010-10-01T23:59:59.000Z

225

Module Handbook Specialisation Biomass Energy  

E-Print Network (OSTI)

Module Handbook Specialisation Biomass Energy 2nd Semester for the Master Programme REMA/EUREC Course 2008/2009 University of Zaragoza Specialisation Provider: Biomass Energy #12;Specialisation Biomass Energy, University of Zaragoza Modul: Introduction and Basic Concepts

Damm, Werner

226

Thermoelectrics Partnership: Automotive Thermoelectric Modules...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Partnership: Automotive Thermoelectric Modules with Scalable Thermo- and Electro-Mechanical Interfaces Novel Nanostructured Interface Solution for Automotive Thermoelectric...

227

Smart Integrated Power Module  

Energy.gov (U.S. Department of Energy (DOE))

2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

228

Integrated Power Module Cooling  

Energy.gov (U.S. Department of Energy (DOE))

2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

229

Contribution of a Xylan-Binding Module to the Degradation of a Complex Cellulosic Substrate by Designer Cellulosomes  

Science Journals Connector (OSTI)

...ENGINEERING Contribution of a Xylan-Binding Module to the Degradation...The intrinsic cellulose/xylan-binding module (XBM) of...adaptor protein and a cell-surface anchoring protein. J. Bacteriol...121-124. Contribution of a xylan-binding module to the degradation...

Sarah Moraïs; Yoav Barak; Jonathan Caspi; Yitzhak Hadar; Raphael Lamed; Yuval Shoham; David B. Wilson; Edward A. Bayer

2010-04-16T23:59:59.000Z

230

Designed TPR Modules as Novel Anticancer Agents  

SciTech Connect

Molecules specifically designed to modulate protein-protein interactions have tremendous potential as novel therapeutic agents. One important anticancer target is the chaperone Hsp90, whose activity is essential for the folding of many oncogenic proteins, including HER2, IGFIR, AKT, RAF-1, and FLT-3. Here we report the design and characterization of new tetratricopeptide repeat modules, which bind to the C-terminus of Hsp90 with higher affinity and with greater specificity than natural Hsp90-binding co-chaperones. Thus, when these modules are introduced into the cell, they out-compete endogenous co-chaperones for binding, thereby inhibiting Hsp90 function. The effect of Hsp90 inhibition in this fashion is dramatic; HER2 levels are substantially decreased and BT474 HER2 positive breast cancer cells are killed. Our designs thus provide new tools with which to dissect the mechanism of Hsp90-mediated protein folding and also open the door to the development of an entirely new class of anticancer agents.

Cortajarena,A.; Yi, F.; Regan, L.

2008-01-01T23:59:59.000Z

231

International Energy Module  

Gasoline and Diesel Fuel Update (EIA)

This page intentionally left blank This page intentionally left blank 23 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 International Energy Module The NEMS International Energy Module (IEM) simulates the interaction between U.S. and global petroleum markets. It uses assumptions of economic growth and expectations of future U.S. and world crude-like liquids production and consumption to estimate the effects of changes in U.S. liquid fuels markets on the international petroleum market. For each year of the forecast, the NEMS IEM computes world oil prices, provides a supply curve of world crude-like liquids, generates a worldwide oil supply- demand balance with regional detail, and computes quantities of crude oil and light and heavy petroleum products imported into

232

Commercial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

This page intentionally left blank This page intentionally left blank 39 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 Commercial Demand Module The NEMS Commercial Sector Demand Module generates projections of commercial sector energy demand through 2035. The definition of the commercial sector is consistent with EIA's State Energy Data System (SEDS). That is, the commercial sector includes business establishments that are not engaged in transportation or in manufacturing or other types of industrial activity (e.g., agriculture, mining or construction). The bulk of commercial sector energy is consumed within buildings; however, street lights, pumps, bridges, and public services are also included if the establishment operating them is considered commercial.

233

Petroleum Market Module  

Gasoline and Diesel Fuel Update (EIA)

This page intentionally left blank This page intentionally left blank 137 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 Petroleum Market Module The NEMS Petroleum Market Module (PMM) projects petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil (both domestic and imported), petroleum product imports, unfinished oil imports, other refinery inputs (including alcohols, ethers, bioesters, corn, biomass, and coal), natural gas plant liquids production, and refinery processing gain. In addition, the PMM projects capacity expansion and fuel consumption at domestic refineries. The PMM contains a linear programming (LP) representation of U.S. refining activities in the five Petroleum Administration for

234

Renewable Fuels Module  

Gasoline and Diesel Fuel Update (EIA)

page intentionally left blank page intentionally left blank 167 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 Renewable Fuels Module The NEMS Renewable Fuels Module (RFM) provides natural resources supply and technology input information for projections of new central-station U.S. electricity generating capacity using renewable energy resources. The RFM has seven submodules representing various renewable energy sources: biomass, geothermal, conventional hydroelectricity, landfill gas, solar thermal, solar photovoltaics, and wind [1]. Some renewables, such as landfill gas (LFG) from municipal solid waste (MSW) and other biomass materials, are fuels in the conventional sense of the word, while others, such as water, wind, and solar radiation, are energy sources that do not involve the

235

Petroleum Market Module  

Gasoline and Diesel Fuel Update (EIA)

This page inTenTionally lefT blank 135 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2012 Petroleum Market Module The NEMS Petroleum Market Module (PMM) projects petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil (both domestic and imported), petroleum product imports, unfinished oil imports, other refinery inputs (including alcohols, ethers, esters, corn, biomass, and coal), natural gas plant liquids production, and refinery processing gain. In addition, the PMM projects capacity expansion and fuel consumption at domestic refineries. The PMM contains a linear programming (LP) representation of U.S. refining activities in the five Petroleum Administration for

236

Flywheel Energy Storage Module  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

kWh/100 kW kWh/100 kW Flywheel Energy Storage Module * 100KWh - 1/8 cost / KWh vs. current State of the Art * Bonded Magnetic Bearings on Rim ID * No Shaft / Hub (which limits surface speed) * Flexible Motor Magnets on Rim ID * Develop Touch-down System for Earthquake Flying Rim Eliminate Shaft and Hub Levitate on Passive Magnetic Bearings Increase Rim Tip Speed Larger Diameter Thinner Rim Stores More Energy 4 X increase in Stored Energy with only 60% Increase in Weight Development of a 100 kWh/100 kW Flywheel Energy Storage Module High Speed, Low Cost, Composite Ring with Bore-Mounted Magnetics Current State of the Art Flywheel Limitations of Existing Flywheel * 15 Minutes of storage * Limited to Frequency Regulation Application * Rim Speed (Stored Energy) Limited by Hub Strain and Shaft Dynamics

237

International Energy Module  

Gasoline and Diesel Fuel Update (EIA)

2 2 International Energy Module The NEMS International Energy Module (IEM) simulates the interaction between U.S. and global petroleum markets. It uses assumptions of economic growth and expectations of future U.S. and world crude-like liquids production and consumption to estimate the effects of changes in U.S. liquid fuels markets on the international petroleum market. For each year of the forecast, the NEMS IEM computes oil prices, provides a supply curve of world crude-like liquids, generates a worldwide oil supply- demand balance with regional detail, and computes quantities of crude oil and light and heavy petroleum products imported into the United States by export region. Changes in the oil price (WTI), which is defined as the price of light, low-sulfur crude oil delivered to Cushing, Oklahoma in

238

Detection of amplitude modulation, frequency modulation, and quasifrequency modulation by the budgerigar (Melopsittacus undulatus)  

Science Journals Connector (OSTI)

In budgerigars as in humans the detection of amplitude modulation (AM) remains relatively constant as modulation frequency increases while detection of frequency modulation(FM) improves. The point at which FM and AM are equal defines the critical modulation frequency (CMF). The CMF is approximately half the size of the critical band in humans because phase information is lost outside the critical band. At small modulation indices the power spectrum of FM is almost identical to the power spectrum of AM with the difference being the relative phase of the components. The power spectrum of quasifreqeuncy modulation (QFM) is exactly the same as AM even at high?modulation indices. In this experiment two budgerigars were trained by operant conditioning to detect AM FM and QFM at several modulation rates at three carrier frequencies. Budgerigars show nearly identical thresholds for detecting modulation in FM and QFM tones at low?modulation rates and similar thresholds for detecting modulation in FM AM and QFM tones at higher modulation rates. These results argue for an insensitivity to phase differences in budgerigars when they fall outside the frequency bandwidths of the auditory system. [Work supported by NIH Grant Nos. DC?00198 and MH?00982 to RJD.

Jian?Yu Lin; Robert J. Dooling

1997-01-01T23:59:59.000Z

239

Design Considerations for a PEBB-Based Marx-Topology ILC Klystron Modulator  

SciTech Connect

The concept of Power Electronic Building Blocks (PEBBs) has its origin in the U.S. Navy during the last decade of the past century. As compared to a more conventional or classical design approach, a PEBB-oriented design approach combines various potential advantages such as increased modularity, high availability and simplified serviceability. This relatively new design paradigm for power conversion has progressively matured since then and its underlying philosophy has been clearly and successfully demonstrated in a number of real-world applications. Therefore, this approach has been adopted here to design a Marx-topology modulator for an International Linear Collider (ILC) environment where easy serviceability and high availability are crucial. This paper describes various aspects relating to the design of a 32-cell Marx-topology ILC klystron modulator. The concept of nested droop correction is introduced and illustrated. Several design considerations including cosmic ray withstand, power cycling capability, fault tolerance, etc., are discussed. Details of the design of a Marx cell PEBB are included.

Macken, K.; Beukers, T.; Burkhart, C.; Kemp, M.A.; Nguyen, M.N.; Tang, T.; /SLAC

2009-12-09T23:59:59.000Z

240

Processing module operating methods, processing modules, and communications systems  

DOE Patents (OSTI)

A processing module operating method includes using a processing module physically connected to a wireless communications device, requesting that the wireless communications device retrieve encrypted code from a web site and receiving the encrypted code from the wireless communications device. The wireless communications device is unable to decrypt the encrypted code. The method further includes using the processing module, decrypting the encrypted code, executing the decrypted code, and preventing the wireless communications device from accessing the decrypted code. Another processing module operating method includes using a processing module physically connected to a host device, executing an application within the processing module, allowing the application to exchange user interaction data communicated using a user interface of the host device with the host device, and allowing the application to use the host device as a communications device for exchanging information with a remote device distinct from the host device.

McCown, Steven Harvey; Derr, Kurt W.; Moore, Troy

2014-09-09T23:59:59.000Z

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Number | Open Energy Information  

Open Energy Info (EERE)

Number Number Jump to: navigation, search Properties of type "Number" Showing 200 properties using this type. (previous 200) (next 200) A Property:AvgAnnlGrossOpCpcty Property:AvgTempGeoFluidIntoPlant Property:AvgWellDepth B Property:Building/FloorAreaChurchesChapels Property:Building/FloorAreaGroceryShops Property:Building/FloorAreaHealthServices24hr Property:Building/FloorAreaHealthServicesDaytime Property:Building/FloorAreaHeatedGarages Property:Building/FloorAreaHotels Property:Building/FloorAreaMiscellaneous Property:Building/FloorAreaOffices Property:Building/FloorAreaOtherRetail Property:Building/FloorAreaResidential Property:Building/FloorAreaRestaurants Property:Building/FloorAreaSchoolsChildDayCare Property:Building/FloorAreaShops Property:Building/FloorAreaSportCenters

242

PSCAD Modules Representing PV Generator  

SciTech Connect

Photovoltaic power plants (PVPs) have been growing in size, and the installation time is very short. With the cost of photovoltaic (PV) panels dropping in recent years, it can be predicted that in the next 10 years the contribution of PVPs to the total number of renewable energy power plants will grow significantly. In this project, the National Renewable Energy Laboratory (NREL) developed a dynamic modeling of the modules to be used as building blocks to develop simulation models of single PV arrays, expanded to include Maximum Power Point Tracker (MPPT), expanded to include PV inverter, or expanded to cover an entire PVP. The focus of the investigation and complexity of the simulation determines the components that must be included in the simulation. The development of the PV inverter was covered in detail, including the control diagrams. Both the current-regulated voltage source inverter and the current-regulated current source inverter were developed in PSCAD. Various operations of the PV inverters were simulated under normal and abnormal conditions. Symmetrical and unsymmetrical faults were simulated, presented, and discussed. Both the three-phase analysis and the symmetrical component analysis were included to clarify the understanding of unsymmetrical faults. The dynamic model validation was based on the testing data provided by SCE. Testing was conducted at SCE with the focus on the grid interface behavior of the PV inverter under different faults and disturbances. The dynamic model validation covers both the symmetrical and unsymmetrical faults.

Muljadi, E.; Singh, M.; Gevorgian, V.

2013-08-01T23:59:59.000Z

243

Entanglement Distillation Protocols and Number Theory  

E-Print Network (OSTI)

We show that the analysis of entanglement distillation protocols for qudits of arbitrary dimension $D$ benefits from applying basic concepts from number theory, since the set $\\zdn$ associated to Bell diagonal states is a module rather than a vector space. We find that a partition of $\\zdn$ into divisor classes characterizes the invariant properties of mixed Bell diagonal states under local permutations. We construct a very general class of recursion protocols by means of unitary operations implementing these local permutations. We study these distillation protocols depending on whether we use twirling operations in the intermediate steps or not, and we study them both analitically and numerically with Monte Carlo methods. In the absence of twirling operations, we construct extensions of the quantum privacy algorithms valid for secure communications with qudits of any dimension $D$. When $D$ is a prime number, we show that distillation protocols are optimal both qualitatively and quantitatively.

H. Bombin; M. A. Martin-Delgado

2005-03-01T23:59:59.000Z

244

Entanglement distillation protocols and number theory  

SciTech Connect

We show that the analysis of entanglement distillation protocols for qudits of arbitrary dimension D benefits from applying basic concepts from number theory, since the set Z{sub D}{sup n} associated with Bell diagonal states is a module rather than a vector space. We find that a partition of Z{sub D}{sup n} into divisor classes characterizes the invariant properties of mixed Bell diagonal states under local permutations. We construct a very general class of recursion protocols by means of unitary operations implementing these local permutations. We study these distillation protocols depending on whether we use twirling operations in the intermediate steps or not, and we study them both analytically and numerically with Monte Carlo methods. In the absence of twirling operations, we construct extensions of the quantum privacy algorithms valid for secure communications with qudits of any dimension D. When D is a prime number, we show that distillation protocols are optimal both qualitatively and quantitatively.

Bombin, H.; Martin-Delgado, M.A. [Departamento de Fisica Teorica I, Universidad Complutense, 28040 Madrid (Spain)

2005-09-15T23:59:59.000Z

245

ALARA notes, Number 8  

SciTech Connect

This document contains information dealing with the lessons learned from the experience of nuclear plants. In this issue the authors tried to avoid the `tyranny` of numbers and concentrated on the main lessons learned. Topics include: filtration devices for air pollution abatement, crack repair and inspection, and remote handling equipment.

Khan, T.A.; Baum, J.W.; Beckman, M.C. [eds.] [eds.

1993-10-01T23:59:59.000Z

246

CHROMOSOME NUMBERS IN MAMMALS  

Science Journals Connector (OSTI)

...variables for which the double inte-gral does not exist: R. L. JEFFERY. On the number of elements in a group which have a power in...society will meet at Columbia University, MA ay 2, 1925. W. BENJAMIN FITE Acting Secretary 424 SCIENCE

Theophilus S. Painter

1925-04-17T23:59:59.000Z

247

Baryon Number Violation  

E-Print Network (OSTI)

This report, prepared for the Community Planning Study - Snowmass 2013 - summarizes the theoretical motivations and the experimental efforts to search for baryon number violation, focussing on nucleon decay and neutron-antineutron oscillations. Present and future nucleon decay search experiments using large underground detectors, as well as planned neutron-antineutron oscillation search experiments with free neutron beams are highlighted.

K. S. Babu; E. Kearns; U. Al-Binni; S. Banerjee; D. V. Baxter; Z. Berezhiani; M. Bergevin; S. Bhattacharya; S. Brice; R. Brock; T. W. Burgess; L. Castellanos; S. Chattopadhyay; M-C. Chen; E. Church; C. E. Coppola; D. F. Cowen; R. Cowsik; J. A. Crabtree; H. Davoudiasl; R. Dermisek; A. Dolgov; B. Dutta; G. Dvali; P. Ferguson; P. Fileviez Perez; T. Gabriel; A. Gal; F. Gallmeier; K. S. Ganezer; I. Gogoladze; E. S. Golubeva; V. B. Graves; G. Greene; T. Handler; B. Hartfiel; A. Hawari; L. Heilbronn; J. Hill; D. Jaffe; C. Johnson; C. K. Jung; Y. Kamyshkov; B. Kerbikov; B. Z. Kopeliovich; V. B. Kopeliovich; W. Korsch; T. Lachenmaier; P. Langacker; C-Y. Liu; W. J. Marciano; M. Mocko; R. N. Mohapatra; N. Mokhov; G. Muhrer; P. Mumm; P. Nath; Y. Obayashi; L. Okun; J. C. Pati; R. W. Pattie Jr.; D. G. Phillips II; C. Quigg; J. L. Raaf; S. Raby; E. Ramberg; A. Ray; A. Roy; A. Ruggles; U. Sarkar; A. Saunders; A. Serebrov; Q. Shafi; H. Shimizu; M. Shiozawa; R. Shrock; A. K. Sikdar; W. M. Snow; A. Soha; S. Spanier; G. C. Stavenga; S. Striganov; R. Svoboda; Z. Tang; Z. Tavartkiladze; L. Townsend; S. Tulin; A. Vainshtein; R. Van Kooten; C. E. M. Wagner; Z. Wang; B. Wehring; R. J. Wilson; M. Wise; M. Yokoyama; A. R. Young

2013-11-21T23:59:59.000Z

248

CHEMICAL SAFETY Emergency Numbers  

E-Print Network (OSTI)

- 1 - CHEMICAL SAFETY MANUAL 2010 #12;- 2 - Emergency Numbers UNBC Prince George Campus Security Prince George Campus Chemstores 6472 Chemical Safety 6472 Radiation Safety 5530 Biological Safety 5530 Risk and Safety Manager 5535 Security 7058 #12;- 3 - FOREWORD This reference manual outlines the safe

Bolch, Tobias

249

Hilbert von Neumann modules  

E-Print Network (OSTI)

We introduce a way of regarding Hilbert von Neumann modules as spaces of operators between Hilbert space, not unlike [Skei], but in an apparently much simpler manner and involving far less machinery. We verify that our definition is equivalent to that of [Skei], by verifying the `Riesz lemma' or what is called `self-duality' in [Skei]. An advantage with our approach is that we can totally side-step the need to go through $C^*$-modules and avoid the two stages of completion - first in norm, then in the strong operator topology - involved in the former approach. We establish the analogue of the Stinespring dilation theorem for Hilbert von Neumann bimodules, and we develop our version of `internal tensor products' which we refer to as Connes fusion for obvious reasons. In our discussion of examples, we examine the bimodules arising from automorphisms of von Neumann algebras, verify that fusion of bimodules corresponds to composition of automorphisms in this case, and that the isomorphism class of such a bimodule...

Bikram, Panchugopal; Srinivasan, R; Sunder, V S

2011-01-01T23:59:59.000Z

250

Exposure of mouse embryonic pancreas to metformin enhances the number of pancreatic progenitors  

Science Journals Connector (OSTI)

Developing beta cells are vulnerable to nutrient environmental signals. Early developmental processes that alter the number of pancreatic progenitors can determine the number of beta cells present at birth. Me...

Brigid Gregg; Lynda Elghazi; Emilyn U. Alejandro; Michelle R. Smith…

2014-12-01T23:59:59.000Z

251

PHOTOVOLTAIC MODULE AND SHADOW: STUDY AND INTEGRATION OF A CURRENT BALANCING SYSTEM  

E-Print Network (OSTI)

PHOTOVOLTAIC MODULE AND SHADOW: STUDY AND INTEGRATION OF A CURRENT BALANCING SYSTEM Stéphane: Current crystalline photovoltaic modules (PV) are designed with 36 or 72 series ­ connected PV cells of shadow, keep the reliability and the cost imposed by the market [7, 8, and 9]. This study concerns

Paris-Sud XI, Université de

252

E-Print Network 3.0 - allogeneic plx-pad cells Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

and Endocrine Research (CeDER) Collection: Biology and Medicine 77 Sensing environmental lipids by dendritic cell modulates its function1 Frdric Coutant* Summary: . These cells...

253

E-Print Network 3.0 - allogeneic hematophoietic cell Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

and Endocrine Research (CeDER) Collection: Biology and Medicine 77 Sensing environmental lipids by dendritic cell modulates its function1 Frdric Coutant* Summary: . These cells...

254

Approved Module Information for ME2501, 2014/5 Module Title/Name: Design for Use Module Code: ME2501  

E-Print Network (OSTI)

process How to gather user data The role of creativity within engineering design. #12;Module Delivery2501 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Credits and Management. BSc Transport Product Design. BEng/MEng Mechanical Engineering. BEng/MEng Electromechanical

Neirotti, Juan Pablo

255

Determining Outdoor CPV Cell Temperature: Preprint  

SciTech Connect

An accurate method is needed for determining cell temperature when measuring CPV modules outdoors. It has been suggested that cell temperature can be calculated though a procedure that shutters sunlight to the cells while measuring the transients in open-circuit voltage (Voc) and heat sink temperature. This paper documents application of this shutter procedure to multiple CPV modules at NREL. The challenges and limitations are presented along with an alternate approach to measuring CPV cell operating temperature.

Muller, M.; Deline, C.; Marion, B.; Kurtz, S.; Bosco, N.

2011-07-01T23:59:59.000Z

256

Module Title: Metamaterials, Nanophotonics and Plasmonics Module Code: OPTO6004  

E-Print Network (OSTI)

Module lecturers Dr Nicholas Papasimakis, Dr Eric Plum, Dr Vassili A Fedotov Contact (email ID) np3@orc.soton.ac.uk; erp@orc.soton.ac.uk; vaf@orc.soton.ac.uk Is the module subject to external accreditation? No If yes

Anderson, Jim

257

Proposal for New Module Module Title: Photonic Materials  

E-Print Network (OSTI)

Information Academic Unit responsible for the module ORC Core/Compulsory/Optional Compulsory Programme, Dr. S. M. Ganapathy, Dr. G. Brambilla Contact (email ID) acp@orc.soton.ac.uk; smg@orc.soton.ac.uk; gb2@orc.soton.ac.uk Will the module be subject to external accreditation? No If yes, by which body

Southampton, University of

258

Module title Human Resource Management Module code INT3604  

E-Print Network (OSTI)

working and the positive management of conflict and cultural difference Syllabus plan Syllabus planModule title Human Resource Management Module code INT3604 Academic year(s) 2013/4 Credits 15 Basic in the context of human resource management principles and practice as currently applied within organisations

Mumby, Peter J.

259

Module Code ST2004 Module Title Applying Probability: Introduction  

E-Print Network (OSTI)

: Dekker, Kraaikamp, Lopuhaa, Meester: A Modern Introduction to Probability and Statistics, Springer,2005 Probability, 2nd ed, Cambridge, 2007 Swift, L: Mathematics and Statistics for Business, Management and FinanceModule Code ST2004 Module Title Applying Probability: Introduction Pre-requisites None ECTS 5

O'Mahony, Donal E.

260

ELECTRICAL DISTRICT NUMBER EIGHT  

NLE Websites -- All DOE Office Websites (Extended Search)

ELECTRICAL DISTRICT NUMBER EIGHT ELECTRICAL DISTRICT NUMBER EIGHT Board of Directors Reply to: Ronald Rayner C. W. Adams James D. Downing, P.E. Chairman Billy Hickman 66768 Hwy 60 Brian Turner Marvin John P.O. Box 99 Vice-Chairman Jason Pierce Salome, AZ 85348 Denton Ross Jerry Rovey Secretary James N. Warkomski ED8@HARCUVARCO.COM John Utz Gary Wood PHONE:(928) 859-3647 Treasurer FAX: (928) 859-3145 Sent via e-mail Mr. Darrick Moe, Regional Manager Western Area Power Administration Desert Southwest Region P. O. Box 6457 Phoenix, AZ 85005-6457 moe@wapa.gov; dswpwrmrk@wapa.gov Re: ED5-Palo Verde Hub Project Dear Mr. Moe, In response to the request for comments issued at the October 6 Parker-Davis Project customer th meeting, and in conjunction with comments previously submitted by the Southwest Public Power

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Preventive Action Number:  

NLE Websites -- All DOE Office Websites (Extended Search)

8 Preventive Action Report Planning Worksheet 11_0414 1 of 3 8 Preventive Action Report Planning Worksheet 11_0414 1 of 3 EOTA - Business Form Document Title: Preventive Action Report Planning Worksheet Document Number: F-018 Rev 11_0414 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: P-008, Corrective/Preventive Action Notify of Changes: EOTA Employees Referenced Document(s): N/A F-018 Preventive Action Report Planning Worksheet 11_0414 2 of 3 Revision History: Rev. Description of Change 08_0613 Initial Release 09_0924 Worksheet modified to reflect External Audit recommendation for identification of "Cause for Potential Nonconformance". Minor editing changes. 11_0414 Added Preventive Action Number block to match Q-Pulse

262

Preventive Action Number:  

NLE Websites -- All DOE Office Websites (Extended Search)

7 Corrective Action Report Planning Worksheet 11_0414 1 of 3 7 Corrective Action Report Planning Worksheet 11_0414 1 of 3 EOTA - Business Form Document Title: Corrective Action Report Planning Worksheet Document Number: F-017 Rev 11_0414 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: P-008, Corrective/Preventive Action Notify of Changes: EOTA Employees Referenced Document(s): N/A F-017 Corrective Action Report Planning Worksheet 11_0414 2 of 3 Revision History: Rev. Description of Change 08_0613 Initial Release 11_0414 Added problem statement to first block. F-017 Corrective Action Report Planning Worksheet 11_0414 3 of 3 Corrective Action Report Planning Worksheet Corrective Action Number: Source: Details/Problem Statement: Raised By: Raised Date: Target Date:

263

Dynamical systems in nanophotonics: From energy efficient modulators to light forces and optomechanics  

E-Print Network (OSTI)

We demonstrate novel device concepts based on rigorous design of the dynamics of resonant nanophotonic systems, such as dispersionless resonant switches and energy-efficient mo-dulator architectures, slow-light cells, and ...

Kaertner, Franz X.

264

Observation of Nonlocal Modulation with Entangled Photons  

E-Print Network (OSTI)

We demonstrate a new type of quantum mechanical correlation where phase modulators at distant locations, acting on the photons of an entangled pair, interfere to determine the apparent depth of modulation. When the modulators have the same phase, the modulation depth doubles; when oppositely phased, the modulators negate each other.

S. Sensarn; G. Y. Yin; S. E. Harris

2009-09-27T23:59:59.000Z

265

Electricity Market Module  

Gasoline and Diesel Fuel Update (EIA)

6, DOE/EIA- 6, DOE/EIA- M068(2006). Based on fuel prices and electricity demands provided by the other modules of the NEMS, the EMM determines the most economical way to supply electricity, within environmental and operational constraints. There are assumptions about the operations of the electricity sector and the costs of various options in each of the EMM submodules. This section describes the model parameters and assumptions used in EMM. It includes a discussion of legislation and regulations that are incorporated in EMM as well as information about the climate change action plan. The various electricity and technology cases are also described. EMM Regions The supply regions used in EMM are based on the North American Electric Reliability Council regions and

266

Photovoltaic module mounting system  

DOE Patents (OSTI)

A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

Miros, Robert H. J.; Mittan, Margaret Birmingham; Seery, Martin N; Holland, Rodney H

2012-09-18T23:59:59.000Z

267

Photovoltaic module mounting system  

DOE Patents (OSTI)

A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

Miros, Robert H. J. (Fairfax, CA); Mittan, Margaret Birmingham (Oakland, CA); Seery, Martin N. (San Rafael, CA); Holland, Rodney H. (Novato, CA)

2012-04-17T23:59:59.000Z

268

Light modulating device  

DOE Patents (OSTI)

In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity.

Rauh, R. David (Newton, MA); Goldner, Ronald B. (Lexington, MA)

1989-01-01T23:59:59.000Z

269

Light modulating device  

DOE Patents (OSTI)

In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity are disclosed. 1 fig.

Rauh, R.D.; Goldner, R.B.

1989-12-26T23:59:59.000Z

270

Argonne's SpEC Module  

ScienceCinema (OSTI)

Jason Harper, an electrical engineer in Argonne National Laboratory's EV-Smart Grid Interoperability Center, discusses his SpEC Module invention that will enable fast charging of electric vehicles in under 15 minutes. The module has been licensed to BTCPower.

Harper, Jason

2014-06-05T23:59:59.000Z

271

Hierarchical classification of modulation signals  

E-Print Network (OSTI)

features are extracted and used to classify 11 modulation signals plus white noise in a hierarchical fashion. The modulation signals include carrier wave (CW), AM, FM, SSB, FSK2, FSK4, PSK2, PSK4, OOK, QAM16, and QAM32. A hierarchy of classifiers...

Kim, Nam Jin

2012-06-07T23:59:59.000Z

272

Modulated order in classical magnetoelastic chains  

SciTech Connect

We investigate the nature of modulated lattice distortions that can occur in a two-dimensional array of classical magnetoelastic chains coupled together by elastic interactions only. The phase diagram for the lattice structure is obtained by numerically minimizing a one-dimensional, temperature-dependent, effective-free-energy functional of the elastic variables. At zero temperature, only phases where the winding number is uniquely defined are found, and the transitions among these phases are suggestive of a complete devil's-staircase behavior. These numerical results are consistent with N. Ishimura's analytic demonstration that such a staircase exists (J. Phys. Soc. Jpn. 54, 4752 (1985)). At finite temperatures, phases where the winding number is not uniquely defined are found and, in addition, first- and second-order transitions appear. Also of interest are superdegenerate lines where the equilibrium phase is composed of noninteracting solitons of zero energy.

Marchand, M.; Caille, A.

1988-09-01T23:59:59.000Z

273

Assumptions to the Annual Energy Outlook 1999 - Residential Demand Module  

Gasoline and Diesel Fuel Update (EIA)

residential.gif (5487 bytes) residential.gif (5487 bytes) The NEMS Residential Demand Module forecasts future residential sector energy requirements based on projections of the number of households and the stock, efficiency, and intensity of use of energy-consuming equipment. The Residential Demand Module projections begin with a base year estimates of the housing stock, the types and numbers of energy-consuming appliances servicing the stock, and the “unit energy consumption” by appliance (or UEC—in million Btu per household per year). The projection process adds new housing units to the stock, determines the equipment installed in new units, retires existing housing units, and retires and replaces appliances. The primary exogenous drivers for the module are housing starts by type (single-family, multifamily and mobile homes) and Census Division and prices for each energy source for each of the nine Census Divisions. The Residential Demand Module also requires projections of available equipment over the forecast horizon. Over time, equipment efficiency tends to increase because of general technological advances and also because of Federal and/or state efficiency standards. As energy prices and available equipment changes over the forecast horizon, the module includes projected changes to the type and efficiency of equipment purchased as well as projected changes in the usage intensity of the equipment stock.

274

Assumptions to the Annual Energy Outlook 2000 - Residential Demand Module  

Gasoline and Diesel Fuel Update (EIA)

Residential Demand Module forecasts future residential sector energy requirements based on projections of the number of households and the stock, efficiency, and intensity of use of energy-consuming equipment. The Residential Demand Module projections begin with a base year estimates of the housing stock, the types and numbers of energy-consuming appliances servicing the stock, and the “unit energy consumption” by appliance (or UEC—in million Btu per household per year). The projection process adds new housing units to the stock, determines the equipment installed in new units, retires existing housing units, and retires and replaces appliances. The primary exogenous drivers for the module are housing starts by type (single-family, multifamily and mobile homes) and Census Division and prices for each energy source for each of the nine Census Divisions. The Residential Demand Module also requires projections of available equipment over the forecast horizon. Over time, equipment efficiency tends to increase because of general technological advances and also because of Federal and/or state efficiency standards. As energy prices and available equipment changes over the forecast horizon, the module includes projected changes to the type and efficiency of equipment purchased as well as projected changes in the usage intensity of the equipment stock.

275

Oil and Gas Supply Module  

U.S. Energy Information Administration (EIA) Indexed Site

Oil and Gas Supply Module Oil and Gas Supply Module This page inTenTionally lefT blank 119 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2013 Oil and Gas Supply Module The NEMS Oil and Gas Supply Module (OGSM) constitutes a comprehensive framework with which to analyze crude oil and natural gas exploration and development on a regional basis (Figure 8). The OGSM is organized into 4 submodules: Onshore Lower 48 Oil and Gas Supply Submodule, Offshore Oil and Gas Supply Submodule, Oil Shale Supply Submodule[1], and Alaska Oil and Gas Supply Submodule. A detailed description of the OGSM is provided in the EIA publication, Model Documentation Report: The Oil and Gas Supply Module (OGSM), DOE/EIA-M063(2011), (Washington, DC, 2011). The OGSM provides

276

Optimization of Fuel Cell System Operating Conditions for Fuel Cell Vehicles  

E-Print Network (OSTI)

An Indirect Methanol Pem Fuel Cell System, SAE 2001, (paperof automotive PEM fuel cell stacks, SAE 2000 (paper numberParasitic Loads in Fuel Cell Vehicles, International Journal

Zhao, Hengbing; Burke, Andy

2008-01-01T23:59:59.000Z

277

Colorado Natural Gas Number of Residential Consumers (Number...  

Gasoline and Diesel Fuel Update (EIA)

Residential Consumers (Number of Elements) Colorado Natural Gas Number of Residential Consumers (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7...

278

Colorado Natural Gas Number of Industrial Consumers (Number of...  

Gasoline and Diesel Fuel Update (EIA)

Industrial Consumers (Number of Elements) Colorado Natural Gas Number of Industrial Consumers (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7...

279

Colorado Natural Gas Number of Commercial Consumers (Number of...  

Gasoline and Diesel Fuel Update (EIA)

Commercial Consumers (Number of Elements) Colorado Natural Gas Number of Commercial Consumers (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7...

280

Connecticut Natural Gas Number of Residential Consumers (Number...  

Gasoline and Diesel Fuel Update (EIA)

Residential Consumers (Number of Elements) Connecticut Natural Gas Number of Residential Consumers (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6...

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Connecticut Natural Gas Number of Commercial Consumers (Number...  

Gasoline and Diesel Fuel Update (EIA)

Commercial Consumers (Number of Elements) Connecticut Natural Gas Number of Commercial Consumers (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7...

282

Connecticut Natural Gas Number of Industrial Consumers (Number...  

Annual Energy Outlook 2012 (EIA)

Industrial Consumers (Number of Elements) Connecticut Natural Gas Number of Industrial Consumers (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7...

283

A Coreless Approaches for On/Off Marx Type Modulators  

SciTech Connect

SLAC was first to report using ON/OFF switches in Marx type modulator. The development of Marx type modulator was bounded with the NLC need. The high energy physics runs based on the ILC concept where longer modulator pulse width is required. The SLAC idea of coreless modulators was useful for other applications (medicine, military, home security, etc.). The discussed conception is presented as a continuation of the earlier published articles. Several types of the Marx ON/OFF type modulators are under consideration. This article describes the new coreless approach, based on the solid state ON/OFF Marx's topology. An AC high voltage network feeds individual Marx's cells through the inductive and diode assemblies. Further integration of the ON/OFF Marx type modulator and its power supply is proposed. Two topologies are under consideration. The first scheme is an integration of DC/DC converters with ON/OFF Marx. The second topology is based on the usage of AC network directly with ON/OFF Marx scheme.

Krasnykh, Anatoly; /SLAC

2007-03-05T23:59:59.000Z

284

Fuel Cell Power Plants Renewable and Waste Fuels  

NLE Websites -- All DOE Office Websites (Extended Search)

Power Plants Power Plants Fuel Cell Power Plants Renewable and Waste Fuels DOE-DOD Workshop Washington, DC. January 13, 2011 reliable, efficient, ultra-clean FuelCell Energy, Inc. * Premier developer of stationary fuel Premier developer of stationary fuel cell technology - founded in 1969 * Over 50 installations in North America, Europe, and Asia * Industrial, commercial, utility products products * 300 KW to 50 MW and beyond FuelCell Energy, the FuelCell Energy logo, Direct FuelCell and "DFC" are all registered trademarks (®) of FuelCell Energy, Inc. g Product Line Based on Stack Building Block Cell Package and Stack Four-Stack Module DFC3000 Two 4-Stack Modules 2.8 MW Single-Stack Module Single Stack Module DFC1500 One 4-Stack Module 1.4 MW DFC300

285

EIA-Assumptions to the Annual Energy Outlook - Residential Demand Module  

Gasoline and Diesel Fuel Update (EIA)

Residential Demand Module Residential Demand Module Assumptions to the Annual Energy Outlook 2007 Residential Demand Module Figure 5. United States Census Divisions. Need help, contact the National Energy Information Center at 202-586-8800. The NEMS Residential Demand Module forecasts future residential sector energy requirements based on projections of the number of households and the stock, efficiency, and intensity of use of energy-consuming equipment. The Residential Demand Module projections begin with a base year estimate of the housing stock, the types and numbers of energy-consuming appliances servicing the stock, and the "unit energy consumption" by appliance (or UEC-in million Btu per household per year). The projection process adds new housing units to the stock, determines the equipment installed in new

286

Research on stable, high-efficiency amorphous silicon multijunction modules  

SciTech Connect

This report describes research to improve the understanding of amorphous silicon alloys and other relevant non-semiconductor materials for use in high-efficiency, large-area multijunction modules. The research produced an average subcell initial efficiency of 8.8% over a 1-ft{sup 2} area using same-band-gap, dual-junction cells deposited over a ZnO/AlSi back reflector. An initial efficiency of 9.6% was achieved using a ZnO/Ag back reflector over smaller substrates. A sputtering machine will be built to deposit a ZnO/Ag back reflector over a 1-ft{sup 2} area so that a higher efficiency can also be obtained on larger substrates. Calculations have been performed to optimize the grid pattern, bus bars, and cell interconnects on modules. With our present state of technology, we expect a difference of about 6% between the aperture-area and active-area efficiencies of modules. Preliminary experiments show a difference of about 8%. We can now predict the performance of single-junction cells after long-term light exposure at 50{degree}C by exposing cells to short-term intense light at different temperatures. We find that single-junction cells deposited on a ZnO/Ag back reflector show the highest stabilized efficiency when the thickness of the intrinsic layers is about 2000 {angstrom}. 8 refs.

Guha, S. (United Solar Systems Corp., Troy, MI (United States))

1991-12-01T23:59:59.000Z

287

Alternative Energy Sources - An Interdisciplinary Module for...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Alternative Energy Sources - An Interdisciplinary Module for Energy Education Alternative Energy Sources - An Interdisciplinary Module for Energy Education Below is information...

288

Abstract 5327: Using CellMiner for gene expression, DNA copy number, microRNA transcript levels, variant status, drug activity, and their integration for systems pharmacology for the NCI-60  

Science Journals Connector (OSTI)

...To make this data accessible for both bioinformaticists and non-bioinformaticists, we have developed the CellMiner set of web-based tools (http://discover.nci.nih.gov/cellminer). These tools currently or in the near future will provide...

William C. Reinhold; Margot Sunshine; Sudir Varma; Joel Morris; Kurt Kohn; James Doroshow; Yves Pommier

2014-10-01T23:59:59.000Z

289

Construction Project Number  

NLE Websites -- All DOE Office Websites (Extended Search)

North Execution - (2009 - 2011) North Execution - (2009 - 2011) Construction Project Number 2009 2010 2011 Project Description ANMLPL 0001C 76,675.32 - - Animas-Laplata circuit breaker and power rights CRGRFL 0001C - - 7,177.09 Craig Rifle Bay and transfer bay upgrade to 2000 amps; / Convert CRG RFL to 345 kV out of Bears Ear Sub FGE 0019C - - 39,207.86 Replace 69/25kV transformer KX2A at Flaming Gorge FGE 0020C - - 52,097.12 Flaming Gorge: Replace failed KW2A transformer HDN 0069C 16,638.52 208,893.46 3,704,578.33 Replace failed transformer with KZ1A 250 MVA 230/138kv

290

KPA Activity Number  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

supports CMM-SW Level 2 supports CMM-SW Level 2 Mapping of the DOE Systems Engineering Methodology to the Software Engineering Institute (SEI) Software Capability Maturity Model (CMM- SW) level 2. Date: September 2002 Page 1 KPA Activity Number KPA Activity SEM Section SME Work Product SQSE Web Site http://cio.doe.gov/sqse REQUIREMENTS MANAGEMENT RM-1 The software engineering group reviews the allocated requirements before they are incorporated in the software project. Chapter 3.0 * Develop High-Level Project Requirements Chapter 4.0 * Establish Functional Baseline * Project Plan * Requirements Specification Document * Requirements Management awareness * Defining Project Requirements RM-2 The software engineering group uses the allocated requirements as the basis for

291

Photovoltaic Cell Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cell Basics Cell Basics Photovoltaic Cell Basics August 16, 2013 - 4:53pm Addthis Photovoltaic (PV) cells, or solar cells, take advantage of the photoelectric effect to produce electricity. PV cells are the building blocks of all PV systems because they are the devices that convert sunlight to electricity. Commonly known as solar cells, individual PV cells are electricity-producing devices made of semiconductor materials. PV cells come in many sizes and shapes, from smaller than a postage stamp to several inches across. They are often connected together to form PV modules that may be up to several feet long and a few feet wide. Modules, in turn, can be combined and connected to form PV arrays of different sizes and power output. The modules of the array make up the major part of a PV system, which can also include electrical connections,

292

Quantum modulation against electromagnetic interference  

E-Print Network (OSTI)

Periodic signals in electrical and electronic equipment can cause interference in nearby devices. Randomized modulation of those signals spreads their energy through the frequency spectrum and can help to mitigate electromagnetic interference problems. The inherently random nature of quantum phenomena makes them a good control signal. I present a quantum modulation method based on the random statistics of quantum light. The paper describes pulse width modulation schemes where a Poissonian light source acts as a random control that spreads the energy of the potential interfering signals. I give an example application for switching-mode power supplies and comment the further possibilities of the method.

Juan Carlos Garcia-Escartin

2014-11-26T23:59:59.000Z

293

Protein folding and diffusion: from in vitro to live cells.  

E-Print Network (OSTI)

??Protein folding landscapes and protein-protein interaction landscapes are subject to modulation by many factors inside living cells: crowding, electrostatics, hydrophobic interactions, and even hydrodynamic phenomena.… (more)

Guo, Minghao

2014-01-01T23:59:59.000Z

294

Oil and Gas Supply Module  

Gasoline and Diesel Fuel Update (EIA)

1 1 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2012 Oil and Gas Supply Module The NEMS Oil and Gas Supply Module (OGSM) constitutes a comprehensive framework with which to analyze crude oil and natural gas exploration and development on a regional basis (Figure 8). The OGSM is organized into 4 submodules: Onshore Lower 48 Oil and Gas Supply Submodule, Offshore Oil and Gas Supply Submodule, Oil Shale Supply Submodule[1], and Alaska Oil and Gas Supply Submodule. A detailed description of the OGSM is provided in the EIA publication, Model Documentation Report: The Oil and Gas Supply Module (OGSM), DOE/EIA-M063(2011), (Washington, DC, 2011). The OGSM provides crude oil and natural gas short-term supply parameters to both the Natural Gas Transmission and Distribution Module and the Petroleum

295

Photovoltaic Module Qualification Plus Testing  

SciTech Connect

This report summarizes a set of test methods that are in the midst of being incorporated into IEC 61215 for certification of a module design or other tests that go beyond certification to establish bankability.

Kurtz, S.; Wohlgemuth, J.; Kempe, M.; Bosco, N.; Hacke, P.; Jordan, D.; Miller, D. C.; Silverman, T. J.; Phillips, N.; Earnest, T.; Romero, R.

2013-12-01T23:59:59.000Z

296

Titel des Moduls: Schallmesstechnik und  

E-Print Network (OSTI)

Titel des Moduls: Schallmesstechnik und Signalverarbeitung (Measurement Technique and Signal. Fortgeschrittene" und/oder mit Modulen TA 2 und TA 6 "Noise and Vibration Control", "Advanced Noise and Vibration

Berlin,Technische Universität

297

Approved Module Information for CH3108, 2014/5 Module Title/Name: Polymer III Module Code: CH3108  

E-Print Network (OSTI)

Additives for Polymer Modification [Part 2]:To illustrate the role of different additives in plastics School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Credits: 20 and their effects in modifying polymer properties and performance using different modification methods

Neirotti, Juan Pablo

298

Approved Module Information for ME4504, 2014/5 Module Title/Name: Renewable Energy Module Code: ME4504  

E-Print Network (OSTI)

turbine Renewable energy system design Renewable Energy Policy: UK and international perspectives ModuleApproved Module Information for ME4504, 2014/5 Module Title/Name: Renewable Energy Module Code: ME understanding of the origins and nature of renewable energy flows and their capture and conversion into useful

Neirotti, Juan Pablo

299

Assumptions to the Annual Energy Outlook 2001 - Petroleum Market Module  

Gasoline and Diesel Fuel Update (EIA)

Petroleum Market Module Petroleum Market Module The NEMS Petroleum Market Module (PMM) forecasts petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil (both domestic and imported), petroleum product imports, other refinery inputs including alcohol and ethers, natural gas plant liquids production, and refinery processing gain. In addition, the PMM estimates capacity expansion and fuel consumption of domestic refineries. The PMM contains a linear programming representation of refining activities in three U.S. regions. This representation provides the marginal costs of production for a number of traditional and new petroleum products. The linear programming results are used to determine end-use product prices for

300

Assumptions to the Annual Energy Outlook 2002 - Petroleum Market Module  

Gasoline and Diesel Fuel Update (EIA)

Petroleum Market Module Petroleum Market Module The NEMS Petroleum Market Module (PMM) forecasts petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil (both domestic and imported), petroleum product imports, other refinery inputs including alcohol and ethers, natural gas plant liquids production, and refinery processing gain. In addition, the PMM estimates capacity expansion and fuel consumption of domestic refineries. The PMM contains a linear programming representation of refining activities in three U.S. regions. This representation provides the marginal costs of production for a number of traditional and new petroleum products. The linear programming results are used to determine end-use product prices for

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Compact magnetic energy storage module  

DOE Patents (OSTI)

A superconducting compact magnetic energy storage module in which a plurality of superconducting toroids, each having a toroidally wound superconducting winding inside a poloidally wound superconducting winding, are stacked so that the flow of electricity in each toroidally wound superconducting winding is in a direction opposite from the direction of electrical flow in other contiguous superconducting toroids. This allows for minimal magnetic pollution outside of the module.

Prueitt, Melvin L. (Los Alamos, NM)

1994-01-01T23:59:59.000Z

302

Compact magnetic energy storage module  

DOE Patents (OSTI)

A superconducting compact magnetic energy storage module in which a plurality of superconducting toroids, each having a toroidally wound superconducting winding inside a poloidally wound superconducting winding, are stacked so that the flow of electricity in each toroidally wound superconducting winding is in a direction opposite from the direction of electrical flow in other contiguous superconducting toroids. This allows for minimal magnetic pollution outside of the module. 4 figures.

Prueitt, M.L.

1994-12-20T23:59:59.000Z

303

Monolithic amorphous silicon modules on continuous polymer substrate  

SciTech Connect

This report examines manufacturing monolithic amorphous silicon modules on a continuous polymer substrate. Module production costs can be reduced by increasing module performance, expanding production, and improving and modifying production processes. Material costs can be reduced by developing processes that use a 1-mil polyimide substrate and multilayers of low-cost material for the front encapsulant. Research to speed up a-Si and ZnO deposition rates is needed to improve throughputs. To keep throughput rates compatible with depositions, multibeam fiber optic delivery systems for laser scribing can be used. However, mechanical scribing systems promise even higher throughputs. Tandem cells and production experience can increase device efficiency and stability. Two alternative manufacturing processes are described: (1) wet etching and sheet handling and (2) wet etching and roll-to-roll fabrication.

Grimmer, D.P. (Iowa Thin Film Technologies, Inc., Ames, IA (United States))

1992-03-01T23:59:59.000Z

304

On neutron numbers and atomic masses  

Science Journals Connector (OSTI)

On neutron numbers and atomic masses ... Assigning neutron numbers, correct neutron numbers, and atomic masses and nucleon numbers. ...

R. Heyrovská

1992-01-01T23:59:59.000Z

305

HIGH-LEVEL MULTI-STEP INVERTER OPTIMIZATION, USING A MINIMUM NUMBER OF POWER TRANSISTORS.  

E-Print Network (OSTI)

HIGH-LEVEL MULTI-STEP INVERTER OPTIMIZATION, USING A MINIMUM NUMBER OF POWER TRANSISTORS. Juan 56-41-246-999 e-mail lmoran@renoir.die.udec.cl ABSTRACT Multilevel inverters with a large number-5]. Multi-level inverters can operate not only with PWM techniques but also with amplitude modulation (AM

Catholic University of Chile (Universidad Católica de Chile)

306

XTH31, Encoding an in Vitro XEH/XET-Active Enzyme, Regulates Aluminum Sensitivity by Modulating in Vivo XET Action, Cell Wall Xyloglucan Content, and Aluminum Binding Capacity in Arabidopsis  

Science Journals Connector (OSTI)

...glucuronoxylan, glucomannan, xylan, and mannan (but not cellulose...wild-type background. Seeds were surface-sterilized and germinated...glucuronoxylan, cellulose, or xylan, giving sugar residues:AlCl3...aluminum and phosphorus on root surfaces and cell wall material. Plant...

Xiao Fang Zhu; Yuan Zhi Shi; Gui Jie Lei; Stephen C. Fry; Bao Cai Zhang; Yi Hua Zhou; Janet Braam; Tao Jiang; Xiao Yan Xu; Chuan Zao Mao; Yuan Jiang Pan; Jian Li Yang; Ping Wu; Shao Jian Zheng

2012-11-30T23:59:59.000Z

307

Abstract 3400: Integrated functional RNAi screening and structural genomics identifies inverse co-modulators of TP53 family and NF-kB transitional activation as potential therapeutic targets in head and neck squamous cell carcinoma  

Science Journals Connector (OSTI)

...Tumor Cell and Molecular Biology Genomics CTRC-AACR San Antonio Breast Cancer...Symposium: 2008 Abstracts UCSC cancer genomics browser. J Zhu 1 JZ Sanborn 1 T...technology platforms. The UCSC Cancer Genomics Browser is a suite of web-based...

Anthony D. Saleh; Shaleeka Cornelius; Hui Cheng; Scott Martin; Pinar Ormanoglu; Xinping Yang; Zhong Chen; Carter VanWaes

2014-10-01T23:59:59.000Z

308

DEDALOS NREL: Cooperative Research and Development Final Report, CRADA Number CRD-07-237  

SciTech Connect

Currently High Concentration Photovoltaic (HCPV) terrestrial modules are based on the combination of optic elements that concentrate the sunlight into much smaller GaAs space cells to produce electricity. GaAs cell technology has been well developed for space applications during the last two decades, but the use of GaAs cells under concentrated sunlight in terrestrial applications leaves unanswered questions about performance, durability and reliability. The work to be performed under this CRADA will set the basis for the design of high-performance, durable and reliable HCPV terrestrial modules that will bring down electricity production costs in the next five years.

Friedman, D.

2013-06-01T23:59:59.000Z

309

The limit of F_p-Betti numbers of a tower of finite covers with amenable fundamental groups.  

E-Print Network (OSTI)

We prove an analogue of the Approximation Theorem of L^2-Betti numbers by Betti numbers for arbitrary coefficient fields and virtually torsionfree amenable groups. The limit of Betti numbers is identified as the dimension of some module over the Ore localization of the group ring.

Peter Linnell; Wolfgang Lueck; Roman Sauer

310

Public release of optimization of metallization scheme for thin emitter wrap-through solar cells for higher efficiency, reduced precious metal costs, and reduced stress.  

SciTech Connect

Back-contact crystalline-silicon photovoltaic solar cells and modules offer a number of advantages, including the elimination of grid shadowing losses, reduced cost through use of thinner silicon substrates, simpler module assembly, and improved aesthetics. While the existing edge tab method for interconnecting and stringing edge-connected back contact cells is acceptably straightforward and reliable, there are further gains to be exploited when you have both contact polarities on one side of the cell. In this work, we produce 'busbarless' emitter wrap-through solar cells that use 41% of the gridline silver (Ag) metallization mass compared to the edge tab design. Further, series resistance power losses are reduced by extraction of current from more places on the cell rear, leading to a fill factor improvement of about 6% (relative) on the module level. Series resistance and current-generation losses associated with large rear bondpads and busbars are eliminated. Use of thin silicon (Si) wafers is enabled because of the reduced Ag metallization mass and by interconnection with conductive adhesives leading to reduced bow. The busbarless cell design interconnected with conductive adhesives passes typical International Electrotechnical Commission damp heat and thermal cycling test.

Ruby, Douglas Scott; Murphy, Brian (Advent Solar, Inc., Albuquerque, NM); Meakin, David (Advent Solar, Inc., Albuquerque, NM); Dominguez, Jason (Advent Solar, Inc., Albuquerque, NM); Hacke, Peter (Advent Solar, Inc., Albuquerque, NM)

2008-08-01T23:59:59.000Z

311

Polyhedral Specular Reflector Design for Ultra-High Spectrum Splitting Solar Module Efficiencies (>50%)  

E-Print Network (OSTI)

Polyhedral Specular Reflector Design for Ultra-High Spectrum Splitting Solar Module Efficiencies., Pasadena, CA, USA 95555-0345 ABSTRACT One pathway to achieving ultra-high solar efficiencies (>50, multijunction solar cell, solar concentrator 1. INTRODUCTION Solar cell efficiency is increased through

Atwater, Harry

312

Transcendental L2 -Betti numbers  

E-Print Network (OSTI)

Transcendental L2 -Betti numbers Atiyah's question Thomas Schick G¨ottingen OA Chennai 2010 Thomas Schick (G¨ottingen) Transcendental L2 -Betti numbers Atiyah's question OA Chennai 2010 1 / 24 #12 = ~M/) with fundamental domain F. L2-Betti numbers:= normalized dimension( space of L2-harmonic forms

Sunder, V S

313

Data Compression with Prime Numbers  

E-Print Network (OSTI)

A compression algorithm is presented that uses the set of prime numbers. Sequences of numbers are correlated with the prime numbers, and labeled with the integers. The algorithm can be iterated on data sets, generating factors of doubles on the compression.

Gordon Chalmers

2005-11-16T23:59:59.000Z

314

Active combustion flow modulation valve  

DOE Patents (OSTI)

A flow modulation valve has a slidably translating hollow armature with at least one energizable coil wound around and fixably attached to the hollow armature. The energizable coil or coils are influenced by at least one permanent magnet surrounding the hollow armature and supported by an outer casing. Lorentz forces on the energizable coils which are translated to the hollow armature, increase or decrease the flow area to provide flow throttling action. The extent of hollow armature translation depends on the value of current supplied and the direction of translation depends on the direction of current flow. The compact nature of the flow modulation valve combined with the high forces afforded by the actuator design provide a flow modulation valve which is highly responsive to high-rate input control signals.

Hensel, John Peter; Black, Nathaniel; Thorton, Jimmy Dean; Vipperman, Jeffrey Stuart; Lambeth, David N; Clark, William W

2013-09-24T23:59:59.000Z

315

The assess facility descriptor module  

SciTech Connect

The Facility Descriptor (Facility) module is part of the Analytic System and Software for Evaluating Safeguards and Security (ASSESS). Facility is the foundational software application in the ASSESS system for modelling a nuclear facility's safeguards and security system to determine the effectiveness against theft of special nuclear material. The Facility module provides the tools for an analyst to define a complete description of a facility's physical protection system which can then be used by other ASSESS software modules to determine vulnerability to a spectrum of insider and outsider threats. The analyst can enter a comprehensive description of the protection system layout including all secured areas, target locations, and detailed safeguards specifications. An extensive safeguard component catalog provides the reference data for calculating delay and detection performance. Multiple target locations within the same physical area may be specified, and the facility may be defined for two different operational states such as dayshift and nightshift. 6 refs., 5 figs.

Jordan, S.E.; Winblad, A.; Key, B.; Walker, S.; Renis, T.; Saleh, R.

1989-01-01T23:59:59.000Z

316

Solid-state membrane module  

DOE Patents (OSTI)

Solid-state membrane modules comprising at least one membrane unit, where the membrane unit has a dense mixed conducting oxide layer, and at least one conduit or manifold wherein the conduit or manifold comprises a dense layer and at least one of a porous layer and a slotted layer contiguous with the dense layer. The solid-state membrane modules may be used to carry out a variety of processes including the separating of any ionizable component from a feedstream wherein such ionizable component is capable of being transported through a dense mixed conducting oxide layer of the membrane units making up the membrane modules. For ease of construction, the membrane units may be planar.

Gordon, John Howard (Salt Lake City, UT); Taylor, Dale M. (Murray, UT)

2011-06-07T23:59:59.000Z

317

Progress of MICE RFCC Module  

SciTech Connect

Recent progress on the design and fabrication of the RFCC (RF and superconducting Coupling Coil) module for the international MICE (Muon Ionization Cooling Experiment) are reported. The MICE ionization cooling channel has two RFCC modules, each having four 201- MHz normal conducting RF cavities surrounded by one superconducting coupling coil (solenoid) magnet. The magnet is designed to be cooled by three cryocoolers. Fabrication of the RF cavities is complete; preparation for the cavity electro-polishing, low power RF measurements, and tuning are in progress at Lawrence Berkeley National Laboratory (LBNL). Fabrication of the cold mass of the first coupling coil magnet has been completed in China and the cold mass arrived at LBNL in late 2011. Preparations for testing the cold mass are currently under way at Fermilab. Plans for the RFCC module assembly and integration are being developed and are described.

Li, D.; Bowring, D.; DeMello, A.; Gourlay, S.; Green, M.; Li, N.; Niinikoski, T.; Pan, H.; Prestemon, S.; Virostek, S.; Zisman, M.; Bross, A.; Carcagno, R.; Kashikhin, V.; Sylvester, C.; Chen, A.B.; Guo, Bin; Li, Liyi; Xu, Fengyu; Cao, Y.; Sun, S.; Wang, Li; Yin, Lixin; Luo, Tianhuan; Summers, Don; Smith, B.; Radovinsky, A.; Zhukovsky, A.; Kaplan, D.

2012-05-20T23:59:59.000Z

318

E-Print Network 3.0 - apoptotic cell death Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

apoptotic cells influ- ence antigen processing... : Intravenous apoptotic spleen cell infusion induces a TGF--dependent regulatory T- cell expansion. Cell Death... number ......

319

Performance of the prototype module of the GlueX electromagnetic barrel calorimeter  

SciTech Connect

A photon beam test of the 4 m long prototype lead/scintillating-fibre module for the GlueX electromagnetic barrel calorimeter was carried out in Hall B at the Thomas Jefferson National Accelerator Facility with the objective of measuring the energy and timing resolutions of the module as well as the number of photoelectrons generated. Data were collected over an energy range of 150 - â 650 MeV at multiple positions and angles along the module. Details of the analysis at the centre of and perpendicular to the module are shown herein; the results are View the MathML source, View the MathML source ps, and 660 photoelectrons for 1 GeV at each end of the module.

Leverington, Blake; Lolos, George; Papandreou, Zisis; Hakobyan, Rafael; Huber, Garth; Janzen, Kathryn; Semenov, Andrei; Scott, Eric; Shepherd, Matthew; Carman, Daniel; Lawrence, David; Smith, Elton; Taylor, Simon; Wolin, Elliott; Klein, Franz; Santoro, Joseph; Sober, Daniel; Kourkoumeli, Christina

2008-11-01T23:59:59.000Z

320

Tocopherol Succinate: Modulation of Antioxidant Enzymes and Oncogene Expression, and Hematopoietic Recovery  

SciTech Connect

Purpose: A class of naturally occurring isoforms of tocopherol (tocols) was shown to have varying degrees of protection when administered before radiation exposure. We recently demonstrated that {alpha}-tocopherol succinate (TS) is a potential radiation prophylactic agent. Our objective in this study was to further investigate the mechanism of action of TS in mice exposed to {sup 60}Co {gamma}-radiation. Methods and Materials: We evaluated the effects of TS on expression of antioxidant enzymes and oncogenes by quantitative RT-PCR in bone marrow cells of {sup 60}Co {gamma}-irradiated mice. Further, we tested the ability of TS to rescue and repopulate hematopoietic stem cells by analyzing bone marrow cellularity and spleen colony forming unit in spleen of TS-injected and irradiated mice. Results: Our results demonstrate that TS modulated the expression of antioxidant enzymes and inhibited expression of oncogenes in irradiated mice at different time points. TS also increased colony forming unit-spleen numbers and bone marrow cellularity in irradiated mice. Conclusions: Results provide additional support for the observed radioprotective efficacy of TS and insight into mechanisms.

Singh, Vijay K., E-mail: singh@afrri.usuhs.mi [Radiation Countermeasures Program, Armed Forces Radiobiology Research Institute, Uniformed Services University of the Health Sciences, Bethesda, MD (United States); Parekh, Vaishali I.; Brown, Darren S.; Kao, Tzu-Cheg [Radiation Countermeasures Program, Armed Forces Radiobiology Research Institute, Uniformed Services University of the Health Sciences, Bethesda, MD (United States); Mog, Steven R. [Veterinary Sciences Department, Armed Forces Radiobiology Research Institute, Uniformed Services University of the Health Sciences, Bethesda, MD (United States)

2011-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Photovoltaic Cz silicon module improvements. Annual technical progress report, November 9, 1995--November 8, 1996  

SciTech Connect

Work focused on reducing the cost per watt of Cz silicon photovoltaic modules under Phase I of Siemens Solar Industries` DOE/NREL PVMaT 4A subcontract is described. Module cost components are analyzed and solutions to high-cost items are discussed in terms of specific module designs. The approaches of using larger cells and modulus to reduce per-part processing cost, and of minimizing yield loss are particularly leveraging. Yield components for various parts of the fabrication process and various types of defects are shown, and measurements of the force required to break wafers throughout the cell fabrication sequence are given. The most significant type of yield loss is mechanical breakage. The implementation of statistical process control on key manufacturing processes at Siemens Solar Industries is described. Module configurations prototyped during Phase I of this project and scheduled to begin production in Phase II have a projected cost per watt reduction of 19%.

King, R.R.; Mitchell, K.W.; Jester, T.L. [Siemens Solar Industries, Camarillo, CA (United States)

1998-02-01T23:59:59.000Z

322

Quality control of polymer solar modules by lock-in thermography  

Science Journals Connector (OSTI)

We have characterized lateral imperfections of photovoltaic modules based on solution processed polymer-fullerene semiconductor blends by means of lock-in thermography (LIT). The active layer of the solar cell modules is based on the heterogeneous organic semiconductor system poly(3-hexylthiophene):phenyl- C 61 -butyric acid methyl ester and the power conversion efficiency of the modules reached nearly 2% under irradiation of an AM 1.5 solar simulator. Applying highly sensitive LIT allowed us to detect several kinds of laterally distributed defects originating from imperfections in the respective functional layers as well as in the quality of encapsulation. We show that LIT is a powerful method for the quality control of large area polymersolar cells and modules enabling fast feedback for optimization of production parameters.

Harald Hoppe; Jonas Bachmann; Burhan Muhsin; Karl-Heinz Drüe; Ingo Riedel; Gerhard Gobsch; Claudia Buerhop-Lutz; Christoph J. Brabec; Vladimir Dyakonov

2010-01-01T23:59:59.000Z

323

A novel design for monolithic interconnected modules (MIMs) for thermophotovoltaic (TPV) power conversion  

SciTech Connect

The design for the fabrication of Monolithic Interconnected Modules (MIMs) for thermophotovoltaic (TPV) power conversion described in this paper utilizes a novel, interdigitated contacting scheme that increases the flexibility in the size of the component cells and hence the output current and voltage of the module. This flexibility is gained at the expense of only minimally increased grid obscuration. Because the design uses the grid fingers of the component cells as the interconnect structure, the area of the device used for this purpose becomes negligible. In this paper the authors report on the specifics of the design as well as issues related to the fabrication of the modules. Preliminary performance data for representative modules also are offered.

Ward, J.S.; Duda, A.; Wanlass, M.W. [National Renewable Energy Lab., Golden, CO (United States)] [and others

1997-06-01T23:59:59.000Z

324

Ebola Virus Modulates Transforming Growth Factor ? Signaling and Cellular Markers of Mesenchyme-Like Transition in Hepatocytes  

Science Journals Connector (OSTI)

...research-article Virus-Cell Interactions Ebola Virus Modulates Transforming Growth Factor...contributed equally to this publication. Ebola virus (EBOV) causes a severe hemorrhagic...signaling responses in the pathogenesis of Ebola virus disease. IMPORTANCE Ebola virus...

Jason Kindrachuk; Victoria Wahl-Jensen; David Safronetz; Brett Trost; Thomas Hoenen; Ryan Arsenault; Friederike Feldmann; Dawn Traynor; Elena Postnikova; Anthony Kusalik; Scott Napper; Joseph E. Blaney; Heinz Feldmann; Peter B. Jahrling

2014-06-18T23:59:59.000Z

325

Module Handbook Specialisation Wind Energy  

E-Print Network (OSTI)

of Wind Turbines Module name: Wind potential, Aerodynamics & Loading of Wind Turbines Section Classes Evaluation of Wind Energy Potential Wind turbine Aerodynamics Static and dynamic Loading of Wind turbines Wind turbine Aerodynamics Static and dynamic Loading of Wind turbines Credit points 8 CP

Habel, Annegret

326

Approved Module Information for CE1102, 2014/5 Module Title/Name: Organic Chemistry for Engineers Module Code: CE1102  

E-Print Network (OSTI)

Approved Module Information for CE1102, 2014/5 Module Title/Name: Organic Chemistry for Engineers Module Code: CE1102 School: Engineering and Applied Science Module Type: Standard Module New Module chemistry. Part 2: Introduction to Laboratory Skills To enable the student to develop good practical skills

Neirotti, Juan Pablo

327

High Heat Flux Thermoelectric Module Using Standard Bulk Material...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Heat Flux Thermoelectric Module Using Standard Bulk Material High Heat Flux Thermoelectric Module Using Standard Bulk Material Presents high heat flux thermoelectric module design...

328

Hail Impact Testing on Crystalline Si Modules with Flexible Packaging...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Hail Impact Testing on Crystalline Si Modules with Flexible Packaging Hail Impact Testing on Crystalline Si Modules with Flexible Packaging Presented at the PV Module Reliability...

329

Overview of the PV Module Model in PVWatts (Presentation)  

SciTech Connect

Overview of the PV module model. PVWatts module power estimates were compared with those using the Sandia model for three modules and data sets.

Marion, B.

2010-09-22T23:59:59.000Z

330

Approved Module Information for EE3OEL, 2014/5 Module Title/Name: Optoelectronics Module Code: EE3OEL  

E-Print Network (OSTI)

Approved Module Information for EE3OEL, 2014/5 Module Title/Name: Optoelectronics Module Code: EE3: * To provide a broad overview of updated optoelectronic principles, devices and applications. The students optoelectronic devices and their important functions for applications in optical communication, signal processing

Neirotti, Juan Pablo

331

Approved Module Information for ME1601, 2014/5 Module Title/Name: Engineering Science Module Code: ME1601  

E-Print Network (OSTI)

to apply the basic engineering principles of mechanics, solid mechanics and thermo fluids to a variety and understanding of the fundamental engineering principles of mechanics, solid mechanics and thermo-fluidsApproved Module Information for ME1601, 2014/5 Module Title/Name: Engineering Science Module Code

Neirotti, Juan Pablo

332

Approved Module Information for PD2003, 2014/5 Module Title/Name: Engineering Principles 2 Module Code: PD2003  

E-Print Network (OSTI)

to apply further engineering principles of mechanics, solid mechanics, energy systems and thermo-fluids and understanding of the fundamental engineering principles of mechanics, solid mechanics and thermo- fluidsApproved Module Information for PD2003, 2014/5 Module Title/Name: Engineering Principles 2 Module

Neirotti, Juan Pablo

333

Number  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NATIONAL ENERGY POLICY NATIONAL ENERGY POLICY STATUS REPORT on Implementation of NEP Recommendations January, 2005 1 NEP RECOMMENDATIONS: STATUS OF IMPLEMENTATION Chapter 1 1. That the President issue an Executive Order to direct all federal agencies to include in any regulatory action that could significantly and adversely affect energy supplies, distribution, or use, a detailed statement of energy effects and alternatives in submissions to the Office of Management and Budget of proposed regulations covered and all notices of proposed regulations published in the Federal Register. STATUS: IMPLEMENTED. In May 2001, President Bush issued Executive Order 13211 requiring federal agencies to include, in any regulatory action that could significantly and

334

NUMBER:  

NLE Websites -- All DOE Office Websites (Extended Search)

SWMU 161 C-743 Trainina Trailer Comolex- Soil Backfill UNIT NAME: . REGULATORY STATUS: AOC LOCATION: Southwest of C-743 building APPROXIMATE DIMENSIONS: 200 feet wide by 200 feet...

335

Compendium of Experimental Cetane Numbers  

SciTech Connect

This report is an updated version of the 2004 Compendium of Experimental Cetane Number Data and presents a compilation of measured cetane numbers for pure chemical compounds. It includes all available single compound cetane number data found in the scientific literature up until March 2014 as well as a number of unpublished values, most measured over the past decade at the National Renewable Energy Laboratory. This Compendium contains cetane values for 389 pure compounds, including 189 hydrocarbons and 201 oxygenates. More than 250 individual measurements are new to this version of the Compendium. For many compounds, numerous measurements are included, often collected by different researchers using different methods. Cetane number is a relative ranking of a fuel's autoignition characteristics for use in compression ignition engines; it is based on the amount of time between fuel injection and ignition, also known as ignition delay. The cetane number is typically measured either in a single-cylinder engine or a constant volume combustion chamber. Values in the previous Compendium derived from octane numbers have been removed, and replaced with a brief analysis of the correlation between cetane numbers and octane numbers. The discussion on the accuracy and precision of the most commonly used methods for measuring cetane has been expanded and the data has been annotated extensively to provide additional information that will help the reader judge the relative reliability of individual results.

Yanowitz, J.; Ratcliff, M. A.; McCormick, R. L.; Taylor, J. D.; Murphy, M. J.

2014-08-01T23:59:59.000Z

336

New Camshaft Phaser Module for Automobile Engines  

Science Journals Connector (OSTI)

?...shows the functional scheme of the camshaft phaser module. The function components which are integrated into the module are encircled in a chain dotted line. A spring loaded piston pressure r...

Dr.-Ing. Uwe Meinig; Dipl.-Ing. (FH) Jürgen Bohner

2013-07-01T23:59:59.000Z

337

Standards for PV Modules and Components -- Recent Developments and Challenges: Preprint  

SciTech Connect

International standards play an important role in the Photovoltaic industry. Since PV is such a global industry it is critical that PV products be measured and qualified the same way everywhere in the world. IEC TC82 has developed and published a number of module and component measurement and qualification standards. These are continually being updated to take advantage of new techniques and equipment as well as better understanding of test requirements. Standards presently being updated include the third edition of IEC 61215, Crystalline Silicon Qualification and the second edition of IEC 61730, PV Module Safety Requirements. New standards under development include qualification of junction boxes, connectors, PV cables, and module integrated electronics as well as for testing the packaging used during transport of modules. After many years of effort, a draft standard on Module Energy Rating should be circulated for review soon. New activities have been undertaken to develop standards for the materials within a module and to develop tests that evaluate modules for wear-out in the field (International PV Module QA Task Force). This paper will discuss these efforts and indicate how the audience can participate in development of international standards.

Wohlgemuth, J. H.

2012-10-01T23:59:59.000Z

338

Electrochemically Modulated Separation for Plutonium Safeguards  

SciTech Connect

Accurate and timely analysis of plutonium in spent nuclear fuel is critical in nuclear safeguards for detection of both protracted and rapid plutonium diversions. Gamma spectroscopy is a viable method for accurate and timely measurements of plutonium provided that the plutonium is well separated from the interfering fission and activation products present in spent nuclear fuel. Electrochemically modulated separation (EMS) is a method that has been used successfully to isolate picogram amounts of Pu from nitric acid matrices. With EMS, Pu adsorption may be turned "on" and "off" depending on the applied voltage, allowing for collection and stripping of Pu without the addition of chemical reagents. In this work, we have scaled up the EMS process to isolate microgram quantities of Pu from matrices encountered in spent nuclear fuel during reprocessing. Several challenges have been addressed including surface area limitations, radiolysis effects, electrochemical cell performance stability, and chemical interferences. After these challenges were resolved, 6 µg Pu was deposited in the electrochemical cell with approximately an 800-fold reduction of fission and activation product levels from a spent nuclear fuel sample. Modeling showed that these levels of Pu collection and interference reduction may not be sufficient for Pu detection by gamma spectroscopy. The main remaining challenges are to achieve a more complete Pu isolation and to deposit larger quantities of Pu for successful gamma analysis of Pu. If gamma analyses of Pu are successful, EMS will allow for accurate and timely on-site analysis for enhanced Pu safeguards.

Pratt, Sandra H.; Breshears, Andrew T.; Arrigo, Leah M.; Schwantes, Jon M.; Duckworth, Douglas C.

2013-12-31T23:59:59.000Z

339

Cell signalling and phospholipid metabolism  

SciTech Connect

These studies explored whether phosphoinositide (PI) has a role in plants analogous to its role in animal cells. Although no parallel activity of PI in signal transduction was found in plant cells, activity of inositol phospholipid kinase was found to be modulated by light and by cell wall degrading enzymes. These studies indicate a major role for inositol phospholipids in plant growth and development as membrane effectors but not as a source of second messengers.

Boss, W.F.

1990-01-01T23:59:59.000Z

340

Stockpile Stewardship Quarterly, Volume 2, Number 1  

National Nuclear Security Administration (NNSA)

1 * May 2012 1 * May 2012 Message from the Assistant Deputy Administrator for Stockpile Stewardship, Chris Deeney Defense Programs Stockpile Stewardship in Action Volume 2, Number 1 Inside this Issue 2 LANL and ANL Complete Groundbreaking Shock Experiments at the Advanced Photon Source 3 Characterization of Activity-Size-Distribution of Nuclear Fallout 5 Modeling Mix in High-Energy-Density Plasma 6 Quality Input for Microscopic Fission Theory 8 Fiber Reinforced Composites Under Pressure: A Case Study in Non-hydrostatic Behavior in the Diamond Anvil Cell 8 Emission of Shocked Inhomogeneous Materials 9 2012 NNSA Stewardship Science Academic

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Module 11: Glossary and Conversions  

Energy.gov (U.S. Department of Energy (DOE))

This glossary covers words, phrases, and acronyms that are used with fuel cell engines and hydrogen fueled vehicles.

342

Development and Testing of the NIF Prototype Module  

SciTech Connect

The NIF Power Conditioning System (PCS) is required to deliver -68 kJ to each of the 3840 flashlamp pairs in the NIF laser in a current pulse with a peak of -500 kA and rise time of- 150 µs. The PCS will consist of 192 modules each of which drive 20 lamp-pairs. Each module will basically be a 6 rnF capacitor bank with a nominal charge voltage of 23.5 kV which is switched by a single pressurized air gas switch to 20 RG-220 cables that are connected to individual lamp loads. In addition each module will have a number of subsystems including; a lamp pre-ionization system, power supplies, isolation circuits, trigger systems, safety dump systems, gas system, and an embedded control system. A module will also include components whose primary function is to limit fault currents and thus minimize collateral damage in faults. In the Prototype Development and Testing effort at Sandia National Laboratories all of these were integrated into a single system and proper fimctionality was demonstrated. Extensive testing was done at nominal operating levels into resistive dummy loads and some testing in fault modes was also done. A description of the system and a summary of testing is given in this paper.

Adcock, J.; Harjes, C.; Mowrer, G.; Wilson, M.

1999-06-25T23:59:59.000Z

343

Amplitude modulation free, wide band frequency modulated oscillator  

E-Print Network (OSTI)

oscillator- - - - - ? ? - ? 3 15 ~ Iiide Bmd Frc saency Lodulator Relatively Free of A@elf tude Modulation-? ? 35 1~'i. Tank Uoltare Versus Fx~tuency or . 'evcral Loads ? - ? ? - 35 17. Screon Voltage Versus Frequency? 10. Amclitude Lodulafion Envelope... of Conventional Design- - ? 39 19 ' ~litude Ltodulation Eave" ope of !iem Design- - - ? - - ? 39 20. Tank Voltage Versus 11~-, coney of Conventisnal Design Hew Design INTRODUCTION The accurate and rapid determination and location of faults is very important...

Nelson, Dick Frank

1951-01-01T23:59:59.000Z

344

Crossed modules of racks Alissa S. Crans  

E-Print Network (OSTI)

Crossed modules of racks Alissa S. Crans Loyola Marymount University Friedrich Wagemann Universit to that of a crossed module of racks. We investigate the relation to categorified racks, namely strict 2-racks, and trunk-like objects in the category of racks, generalizing the relation between crossed modules of groups

Wagemann, Friedrich

345

Nutrient Management Module No. 15 Sustainable  

E-Print Network (OSTI)

Nutrient Management Module No. 15 Sustainable Agriculture by Ann McCauley, Soil Scientist, Clain for those wanting more in-depth information about sustainable agriculture. This module covers Rocky Mountain Source and Applications, with the focus on sustainable agriculture. Objectives After reading this module

Lawrence, Rick L.

346

A Stability of LCLS Linac Modulators  

SciTech Connect

Information concerning to a stability of LCLS RF linac modulators is allocated in this paper. In general a 'pulse-to-pulse' modulator stability (and RF phase as well) is acceptable for the LCLS commission and FEL programs. Further modulator stability improvements are possible and approaches are discussed based on our experimental results.

Decker, F.-J.; Krasnykh, A.; Morris, B.; Nguyen, M.; /SLAC

2012-06-13T23:59:59.000Z

347

Development efforts on silicon solar cells  

SciTech Connect

This report presents a summary of the major results from the silicon high-concentration solar cell program at Stanford University from the period 1983--1990. Following a detailed design study, efforts were focused upon experimental verification of the modeled results that predicted 28% efficiencies for a new 500X concentrator solar cell design. A history of the research progress is given detailing the critical experiments that enabled the demonstration of 19.6% cells in 1983, then subsequent improvements culminating in efficiencies over 28% by 1987. In addition to laboratory efficiency improvements, the report details advances in the understanding of the fundamental device physics and modeling of silicon solar cell operation. The latter stages of the program included the development of module-ready cells in large quantity for the EPRI prototype 500X concentrator modules. Several of these 48-cell modules are currently in the field under test.

Sinton, R.A.; Swanson, R.M. (Stanford Univ., CA (United States))

1992-02-01T23:59:59.000Z

348

Interface module for transverse energy input to dye laser modules  

DOE Patents (OSTI)

An interface module (10) for transverse energy input to dye laser modules is provided particularly for the purpose of delivering enhancing transverse energy beams (36) in the form of illumination bar (54) to the lasing zone (18) of a dye laser device, in particular to a dye laser amplifier (12). The preferred interface module (10) includes an optical fiber array (30) having a plurality of optical fibers (38) arrayed in a co-planar fashion with their distal ends (44) receiving coherent laser energy from an enhancing laser source (46), and their proximal ends (4) delivered into a relay structure (3). The proximal ends (42) of the optical fibers (38) are arrayed so as to be coplanar and to be aimed generally at a common point. The transverse energy beam array (36) delivered from the optical fiber array (30) is acted upon by an optical element array (34) to produce an illumination bar (54) which has a cross section in the form of a elongated rectangle at the position of the lasing window (18). The illumination bar (54) is selected to have substantially uniform intensity throughout.

English, Jr., Ronald E. (Tracy, CA); Johnson, Steve A. (Tracy, CA)

1994-01-01T23:59:59.000Z

349

Fractal analysis for assessing the level of modulation of IMRT fields  

SciTech Connect

Purpose: To investigate the potential of three fractal dimension (FD) analysis methods (i.e., the variation, power spectrum, and variogram methods) as metrics for quantifying the degree of modulation in planned intensity modulated radiation therapy (IMRT) treatment fields, and compare the most suitable FD method to the number of monitor units (MUs), the average leaf gap, and the 2D modulation index (2D MI) for assessing modulation. Methods: The authors implemented, validated, and compared the variation, power spectrum, and variogram methods for computing the FD. Validation of the methods was done using mathematical fractional Brownian surfaces of known FD that ranged in size from 128 x 128 to 512 x 512. The authors used a test set consisting of seven head and neck carcinoma plans (50 prescribed treatment fields) to choose an FD cut-point that ensures no false positives (100% specificity) in distinguishing between moderate and high degrees of field modulation. The degree of field modulation was controlled by adjusting the fluence smoothing parameters in the Eclipse treatment planning system (Varian Medical Systems, Palo Alto, CA). The moderate modulation fields were representative of the degree of modulation used clinically at the authors' institution. The authors performed IMRT quality assurance (QA) on the 50 test fields using the MapCHECK device. The FD cut-point was applied to a validation set consisting of four head and neck plans (28 fields). The area under the curve (AUC) from receiver operating characteristic (ROC) analysis was used to compare the ability of FD, number of MUs, average leaf gap, and the 2D MI for distinguishing between the moderate and high modulation fields. Results: The authors found the variogram FD method to be the most suitable for assessing the modulation complexity of IMRT fields for head and neck carcinomas. Pass rates as measured by the gamma criterion for the MapCHECK IMRT field measurements were higher for the moderately modulated fields, and a gamma criterion with 1 mm distance-to-agreement and 1% dose difference showed a clear separation between the 94% pass rates of the moderate and high modulation groups. From the ROC analysis of the test set, the authors found the AUC of the variogram FD, number of MUs, average leaf gap, and 2D MI methods to be 0.99 (almost perfect), 0.91 (excellent), 0.91 (excellent), and 0.92 (excellent), respectively. A cut-point of FD > 2.25 correctly identified 92.8% of the high modulation fields and 100% of the moderately modulated fields in the validation set, satisfying the condition of no false positives. Conclusions: Of the three FD methods investigated, the variogram method is the most accurate and precise metric for identifying high modulation treatment fields. It is also more accurate and precise than the number of MUs, the average leaf gap, and the 2D MI. Although MapCHECK IMRT QA does a reasonable job at identifying high modulation fields, the variogram FD method provides one with the opportunity to quantitatively and accurately assess modulation and adjust overly modulated fields at the treatment planning stage before they are sent to the treatment machine for QA or patient treatment.

Nauta, Marcel; Villarreal-Barajas, J. Eduardo; Tambasco, Mauro [Department of Physics and Astronomy, University of Calgary, Calgary, Alberta T2N 1N4 (Canada); Department of Physics and Astronomy, University of Calgary, Calgary, Alberta T2N 1N4 (Canada); Department of Oncology, University of Calgary, Calgary, Alberta T2N 1N4 (Canada) and Tom Baker Cancer Centre, Calgary, Alberta T2N 4N2 (Canada)

2011-10-15T23:59:59.000Z

350

Degradation Pathway Models for Photovoltaics Module Lifetime Performance  

E-Print Network (OSTI)

Degradation Pathway Models for Photovoltaics Module Lifetime Performance Nicholas R. Wheeler, Laura data from Underwriter Labs, featuring measurements taken on 18 identical photovoltaic (PV) modules in modules and their effects on module performance over lifetime. Index Terms--photovoltaics, statistical

Rollins, Andrew M.

351

Adams Operations, Local Root Numbers, and the Galois Module Structure of Rings of Integers  

Science Journals Connector (OSTI)

......121 = le , | H | = V. From the tower formula for discriminants (see...non-abelian), or if F ^ = SAe+1 (with e ^ 3), then if...above four cases, by use of the tower formula for discriminants...mod| S I, and hence Fy_x = SAe+1 (with e ^ 3). As before......

M. J. Taylor

1979-07-01T23:59:59.000Z

352

SiC Power Module  

NLE Websites -- All DOE Office Websites (Extended Search)

R&D 100 Entry R&D 100 Entry SiC Power Module 2 R&D 100 Entry SiC Power Module Submitting OrganizatiOn Sandia National Laboratories PO Box 5800, MS 1033 Albuquerque, NM 87185-1033 USA Stanley Atcitty Phone: 505-284-2701 Fax: 505-844-2890 satcitt@sandia.gov AFFIRMATION: I affirm that all information submitted as a part of, or supplemental to, this entry is a fair and accurate representation of this product. _____________________________________ Stanley Atcitty JOint Entry Arkansas Power Electronics International, Inc.; University of Arkansas; Rohm Co., LTD.; and the Department of Energy/ Energy Storage Program. 1. 1. Arkansas Power Electronics International, Inc. 535 W. Research Center Blvd. Fayetteville, AR 72701 USA Alexander B. Lostetter, President & CEO Phone: 479-443-5759

353

Modulation Field Induces Universe Rotation  

E-Print Network (OSTI)

In this paper, we consider a time dependent module field on spacetime extension without modifying commutative relation on noncommutative quantum plane. The significant idea is that $Lorentz$ symmetry is conserved in module and unmodule coordinate. We focus on the redefinition of spacetime structure without considering noncommutative bosonic gas in deforming the product between fields. Which the null vector is a vector on orthogonal $D$ dimensional $Hilbert$ spacetime. In $Riemann$ geometry, the equation of motion is deformed from an induced rotation. Particle field survives on the state composed by two theoretical assumed $null$ vectors, one is commutative, another is anticommutative. In the point of view, neutrino and photon mass are produced by its shift, the rotated effect generates a horizon in redefining particle field.

Chien Yu Chen

2008-06-30T23:59:59.000Z

354

Cast polycrystalline silicon photovoltaic module manufacturing technology improvements. Semiannual subcontract report, January 1--June 30, 1995  

SciTech Connect

The objective of this three-year program is to advance Solarex`s cast polycrystalline silicon manufacturing technology, reduce module production cost, increase module performance and expand Solarex`s commercial production capacities. Two specific objectives of this program are to reduce the manufacturing cost for polycrystalline silicon PV modules to less than $1.20/watt and to increase the manufacturing capacity by a factor of three. To achieve these objectives, Solarex is working in the following technical areas: casting, wire saws, cell process, module assembly, frameless module development, and automated cell handling. Accomplishments reported include: Cast first successful larger ingot producing 73% larger volume of usable Si; Increased the size of the ingot even further and cast an ingot yielding nine 11.4 {times} 11.4 cm bricks, representing a 125% increase in usable Si from a single casting; Operated the wire-saw in a semi-operational mode, producing 459,000 wafers at 94.1% overall yield; Reduced the cost of wire-saw consumables, spare parts, and waste disposal; Developed a cost-effective back surface field process that increases cell efficiency by 5% and began production trials; Developed a plan for increasing the capacity in the module assembly area; Completed qualification testing of modules built using Spire`s automated tabbing and stringing machine; Selected, tested, and qualified a low-cost electrical termination system; Completed long-term UV testing of experimental back sheets; Qualified the structure and adhesive-tape system for mounting frameless modules; and ARRI completed a study of the fracture properties of cast polycrystalline Si wafers and provided the information necessary to calculate the maximum stresses allowable during wafer handling.

Wohlgemuth, J. [Solarex Corp., Frederick, MD (United States)

1996-02-01T23:59:59.000Z

355

New Formic Acid Fuel Cell Orientations to Reduce the Cost of Cell Components.  

E-Print Network (OSTI)

??Formic acid fuel cells show the potential of outperforming or replacing direct methanol fuel cells. A number of issues need to be overcome in order… (more)

Holtkamp, John Calvin

2009-01-01T23:59:59.000Z

356

FUEL CELLS – SOLID OXIDE FUEL CELLS | Gas Distribution  

Science Journals Connector (OSTI)

A uniform distribution of the reactants over the total available electrode surfaces in solid oxide fuel cells (SOFCs) is a prerequisite for the proper operation of the fuel cell. The gas distribution plays a dominant role not only in the current density distribution but also in the temperature distribution over the cell areas and in the stack and modules. Several transport mechanisms for mass transport occurring in the SOFC are introduced and discussed. General flow configurations and structures for the gas distribution at three different levels, i.e., stack/module, cell/tube, and electrode/electrolyte, are discussed for both tubular and planar type cells and illustrated with examples of concentration and temperature profiles.

L.G.J. de Haart; M. Spiller

2009-01-01T23:59:59.000Z

357

Design of a photochemical water electrolysis system based on a W-typed dye-sensitized serial solar module for high hydrogen production  

Science Journals Connector (OSTI)

Abstract A W-typed dye-sensitized serial solar module (W-typed DSSM) was designed for hydrogen production from water electrolysis. The optimal thickness and width of the TiO2 electrode film were 12 ?m and 5 mm, and the optimal thickness of Pt counter electrode film was 4 nm, respectively. The photocurrent density, open circuit voltage, and fill factor were 2.13 mA cm?2, 3.51 V, and 0.61, respectively, for a serial module assembled from five unit cells, which resulted in an overall conversion efficiency of 4.56%. The obtained voltage increased with increasing number of unit cells connected, and was 3.51 V in the five column fabricated W-typed DSSM. 2.1 mL h?1 of hydrogen gas was emitted when a W-typed DSSM assembled from five columns was connected to carbon electrodes in a water electrolysis system. The rate of hydrogen evolution in the five columned W-typed DSSM was 0.00213 L h?1. Therefore, the actual light-hydrogen conversion was calculated to be 2.02%.

Byeong Sub Kwak; Jinho Chae; Misook Kang

2014-01-01T23:59:59.000Z

358

The National Transport Code Collaboration Module Library  

Science Journals Connector (OSTI)

This paper reports on the progress in developing a library of code modules under the auspices of the National Transport Code Collaboration (NTCC). Code modules are high quality, fully documented software packages with a clearly defined interface. The modules provide a variety of functions, such as implementing numerical physics models; performing ancillary functions such as I/O or graphics; or providing tools for dealing with common issues in scientific programming such as portability of Fortran codes. Researchers in the plasma community submit code modules, and a review procedure is followed to insure adherence to programming and documentation standards. The review process is designed to provide added confidence with regard to the use of the modules and to allow users and independent reviews to validate the claims of the modules' authors. All modules include source code; clear instructions for compilation of binaries on a variety of target architectures; and test cases with well-documented input and output. All the NTCC modules and ancillary information, such as current standards and documentation, are available from the NTCC Module Library Website http://w3.pppl.gov/NTCC. The goal of the project is to develop a resource of value to builders of integrated modeling codes and to plasma physics researchers generally. Currently, there are more than 40 modules in the module library.

A.H. Kritz; G. Bateman; J. Kinsey; A. Pankin; T. Onjun; A. Redd; D. McCune; C. Ludescher; A. Pletzer; R. Andre; L. Zakharov; L. Lodestro; L.D. Pearlstein; R. Jong; W. Houlberg; P. Strand; J. Wiley; P. Valanju; H.St. John; R. Waltz; J. Mandrekas; T.K. Mau; J. Carlsson; B. Braams

2004-01-01T23:59:59.000Z

359

RNG: A Practitioner's Overview Random Number Generation  

E-Print Network (OSTI)

RNG: A Practitioner's Overview Random Number Generation A Practitioner's Overview Prof. Michael and Monte Carlo Methods Pseudorandom number generation Types of pseudorandom numbers Properties of these pseudorandom numbers Parallelization of pseudorandom number generators New directions for SPRNG Quasirandom

Mascagni, Michael

360

Low Dose Ionizing Radiation Modulates Immune Function New Project Overview  

NLE Websites -- All DOE Office Websites (Extended Search)

Modulates Immune Function New Project Overview Modulates Immune Function New Project Overview Gregory Nelson Loma Linda University Abstract The immune system provides the first line of defense for exposures to environmental hazards. Protective immunity mechanisms using innate or adaptive responses are employed to mitigate acute challenges or amplify the readiness of the system to respond to future challenges. Some stimuli lead to amplified inflammatory reactions such as delayed hypersensitivity which is required for immunity to parasites and can also lead to adverse consequences such as contact dermatitis. Radiation exposure has the potential to aggravate hypersensitivity reactions as well as to suppress protective immunity. Ionizing radiation at high doses has long been recognized as highly effective in destroying cells of the immune system,

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Motion at low Reynolds number  

E-Print Network (OSTI)

The work described in this thesis centers on inertialess motion at low Reynolds numbers at the crossroad between biofluids and microfluids. Here we address questions regarding locomotion of micro-swimmers, transport of ...

Tam, Daniel See Wai, 1980-

2008-01-01T23:59:59.000Z

362

Departmental Business Instrument Numbering System  

Directives, Delegations, and Requirements

To prescribe procedures for assigning identifying numbers to all Department of Energy (DOE), including the National Nuclear Security Administration, business instruments. Cancels DOE 1331.2B. Canceled by DOE O 540.1A.

2000-12-05T23:59:59.000Z

363

Departmental Business Instrument Numbering System  

Directives, Delegations, and Requirements

The Order prescribes the procedures for assigning identifying numbers to all Department of Energy (DOE) and National Nuclear Security Administration (NNSA) business instruments. Cancels DOE O 540.1. Canceled by DOE O 540.1B.

2005-01-27T23:59:59.000Z

364

E-Print Network 3.0 - amorphous-silicon solar cells Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

results for: amorphous-silicon solar cells Page: << < 1 2 3 4 5 > >> 1 Institute of Energy Conversion University of Delaware Summary: modules. Consulted for a research...

365

E-Print Network 3.0 - alingap solar cell Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

Solar Radiation Monitoring Laboratory Summary: an electrical current when illuminated by light- also called a solar cell Photovoltaic Module A group... produced when plotting...

366

Low Temperature Fuel Cell and Electrolyzer Balance-of-Plant Manufactur...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

(fairly standard) * Batteries or UCs (fairly standard) Fuel Cell Power Module BOP Air Delivery System * Blower Compressor * Currently use off the shelf blowers from a...

367

E-Print Network 3.0 - astrocyte cell line Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

modulate neuronal voltage-gated calcium cur- rents, we performed a whole-cell patch... -culture with astrocytes can augment the magnitude of voltage-gated calcium...

368

California Natural Gas Number of Residential Consumers (Number of Elements)  

U.S. Energy Information Administration (EIA) Indexed Site

Residential Consumers (Number of Elements) Residential Consumers (Number of Elements) California Natural Gas Number of Residential Consumers (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 7,626 7,904,858 8,113,034 8,313,776 1990's 8,497,848 8,634,774 8,680,613 8,726,187 8,790,733 8,865,541 8,969,308 9,060,473 9,181,928 9,331,206 2000's 9,370,797 9,603,122 9,726,642 9,803,311 9,957,412 10,124,433 10,329,224 10,439,220 10,515,162 10,510,950 2010's 10,542,584 10,625,190 10,681,916 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Release Date: 12/12/2013 Next Release Date: 1/7/2014 Referring Pages: Number of Natural Gas Residential

369

Alkaline regenerative fuel cell systems for energy storage  

SciTech Connect

This paper presents the results of a preliminary design study of a Regenerative Fuel Cell Energy Storage system for application to future low-earth orbit space missions. This high energy density storage system is based on state-of-the-art alkaline electrolyte cell technology and incorporates dedicated fuel cell and electrolysis cell modules. 11 refs.

Schubert, F.H.; Reid, M.A.; Martin, R.E.

1981-01-01T23:59:59.000Z

370

Research on stable, high-efficiency amorphous silicon multijunction modules  

SciTech Connect

This report describes research on semiconductor and non-semiconductor materials to enhance the performance of multi-band-gap, multijunction panel with an area greater than 900 cm[sup 2] by 1992. Double-junction and triple-junction cells are mode on a Ag/ZnO back reflector deposited on stainless steel substrates. An a-SiGe alloy is used for the i-layer in the bottom and the middle cells; the top cell uses an amorphous silicon alloy. After the evaporation of an antireflection coating, silver grids and bus bars are put on the top surface and the panel is encapsulated in an ethylene vinyl acetate (EVA)/Tefzel structure to make a 1-ft[sup 2] monolithic module.

Guha, S. (United Solar Systems Corp., Troy, MI (United States))

1992-09-01T23:59:59.000Z

371

Approved Module Information for ME4501, 2014/5 Module Title/Name: Computational Fluid Dynamics and  

E-Print Network (OSTI)

-requisites: Thermodynamics and Fluids (ME3011). Engineering Mathematics 2 (AM21EM). Co-requisites: None Specified ModuleApproved Module Information for ME4501, 2014/5 Module Title/Name: Computational Fluid Dynamics and Applications Module Code: ME4501 School: Engineering and Applied Science Module Type: Standard Module New

Neirotti, Juan Pablo

372

Test results of a Stirling engine utilizing heat exchanger modules with an integral heat pipe  

SciTech Connect

The Heat Pipe Stirling Engine (HP-1000), a free-piston Stirling engine incorporating three heat exchanger modules, each having a sodium filled heat pipe, has been tested at the NASA-Lewis Research Center as part of the Civil Space Technology Initiative (CSTI). The heat exchanger modules were designed to reduce the number of potential flow leak paths in the heat exchanger assembly and incorporate a heat pipe as the link between the heat source and the engine. An existing RE-1000 free-piston Stirling engine was modified to operate using the heat exchanger modules. This paper describes heat exchanger module and engine performance during baseline testing. Condenser temperature profiles, brake power, and efficiency are presented and discussed.

Skupinski, R.C.; Tower, L.K.; Madi, F.J.; Brusk, K.D.

1993-04-01T23:59:59.000Z

373

Outdoor Performance of a Thin-Film Gallium-Arsenide Photovoltaic Module  

SciTech Connect

We deployed a 855 cm2 thin-film, single-junction gallium arsenide (GaAs) photovoltaic (PV) module outdoors. Due to its fundamentally different cell technology compared to silicon (Si), the module responds differently to outdoor conditions. On average during the test, the GaAs module produced more power when its temperature was higher. We show that its maximum-power temperature coefficient, while actually negative, is several times smaller in magnitude than that of a Si module used for comparison. The positive correlation of power with temperature in GaAs is due to temperature-correlated changes in the incident spectrum. We show that a simple correction based on precipitable water vapor (PWV) brings the photocurrent temperature coefficient into agreement with that measured by other methods and predicted by theory. The low operating temperature and small temperature coefficient of GaAs give it an energy production advantage in warm weather.

Silverman, T. J.; Deceglie, M. G.; Marion, B.; Cowley, S.; Kayes, B.; Kurtz, S.

2013-06-01T23:59:59.000Z

374

Modules over principal ideal rings  

E-Print Network (OSTI)

need to note, however, , the difference between the two types of "union" of a set of submodules N 1 of a module N, The first is the "set-theoretic union" con- sisting of representatives of all the distinct elements to be found in the Ni... ideal R, which cons1sts of the elements of the ring. Consider the subset B of R of all elements of the form ra + na, where r and a are ring ele- ments and n is an integer. If rla + nla, r2a + n2a s B, then la + nla 2 2a la r2a + la 2 = (rl - r2)a...

Vieaux, Jules Bellin

2012-06-07T23:59:59.000Z

375

Approved Module Information for BH3328, 2014/5 Module Title/Name: Psychology and Work Module Code: BH3328  

E-Print Network (OSTI)

* Organizational culture, climate, and change * Applying the Psychology of Work and Organizations The learning communication Planning and organizing Interpersonal discussion and communication Indicative Module Content

Neirotti, Juan Pablo

376

Document ID Number: RL-721  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Document ID Number: Document ID Number: RL-721 REV 4 NEPA REVIEW SCREENING FORM DOE/CX-00066 I. Project Title: Nesting Bird Deterrent Study at the 241-C Tank Farm CX B3.8, "Outdoor Terrestrial Ecological and Environmental Research" II. Project Description and Location (including Time Period over which proposed action will occur and Project Dimensions - e.g., acres displaced/disturbed, excavation length/depth, area/location/number of buildings, etc.): Washington River Protection Solutions LLC (WRPS) will perform an outdoor, terrestrial ecological research study to attempt to control and deter nesting birds at the 241-C Tank Farm. This will be a preventative study to test possible methods for controlling &/or minimizing the presence and impacts of nesting birds inside the tank farm. A nesting bird

377

On rings of structural numbers  

E-Print Network (OSTI)

structural numbers over the set X, and let B(X) have the operations defined above with equality also as before. Theorem I. l. If X is any set, then B(X) is a commutative ring with identity. Proof. The structural number 0 is the additive identity element... with identity g. Definition I. 7. If A, B e S(X) then A'B = (P U q ( p e A, q e B, p Il q = &f and p U q can be formed in an odd number of ways). ~E1 t. 4. L t A = (( . b), (bj. 7 )) 4 B = ((b, c), (b), (a)) be in S(X) for some X. Then AD B = {{b, a), {a...

Powell, Wayne Bruce

2012-06-07T23:59:59.000Z

378

Power module assemblies with staggered coolant channels  

DOE Patents (OSTI)

A manifold is provided for supporting a power module assembly with a plurality of power modules. The manifold includes a first manifold section. The first face of the first manifold section is configured to receive the first power module, and the second face of the first manifold section defines a first cavity with a first baseplate thermally coupled to the first power module. The first face of the second manifold section is configured to receive the second power module, and the second face of the second manifold section defines a second cavity with a second baseplate thermally coupled to the second power module. The second face of the first manifold section and the second face of the second manifold section are coupled together such that the first cavity and the second cavity form a coolant channel. The first cavity is at least partially staggered with respect to second cavity.

Herron, Nicholas Hayden; Mann, Brooks S; Korich, Mark D

2013-07-16T23:59:59.000Z

379

Monte Carlo analysis of a monolithic interconnected module with a back surface reflector  

SciTech Connect

Recently, the photon Monte Carlo code, RACER-X, was modified to include wave-length dependent absorption coefficients and indices of refraction. This work was done in an effort to increase the code`s capabilities to be more applicable to a wider range of problems. These new features make RACER-X useful for analyzing devices like monolithic interconnected modules (MIMs) which have etched surface features and incorporates a back surface reflector (BSR) for spectral control. A series of calculations were performed on various MIM structures to determine the impact that surface features and component reflectivities have on spectral utilization. The traditional concern of cavity photonics is replaced with intra-cell photonics in the MIM design. Like the cavity photonic problems previously discussed, small changes in optical properties and/or geometry can lead to large changes in spectral utilization. The calculations show that seemingly innocuous surface features (e.g., trenches and grid lines) can significantly reduce the spectral utilization due to the non-normal incident photon flux. Photons that enter the device through a trench edge are refracted onto a trajectory where they will not escape. This leads to a reduction in the number of reflected below bandgap photons that return to the radiator and reduce the spectral utilization. In addition, trenches expose a lateral conduction layer in this particular series of calculations which increase the absorption of above bandgap photons in inactive material.

Ballinger, C.T.; Charache, G.W. [Lockheed Martin Corp., Schenectady, NY (United States); Murray, C.S. [Bettis Atomic Power Lab., West Mifflin, PA (United States)

1998-10-01T23:59:59.000Z

380

An ultrafast carbon nanotube terahertz polarisation modulator  

SciTech Connect

We demonstrate ultrafast modulation of terahertz radiation by unaligned optically pumped single-walled carbon nanotubes. Photoexcitation by an ultrafast optical pump pulse induces transient terahertz absorption in nanowires aligned parallel to the optical pump. By controlling the polarisation of the optical pump, we show that terahertz polarisation and modulation can be tuned, allowing sub-picosecond modulation of terahertz radiation. Such speeds suggest potential for semiconductor nanowire devices in terahertz communication technologies.

Docherty, Callum J.; Stranks, Samuel D.; Habisreutinger, Severin N.; Joyce, Hannah J.; Herz, Laura M.; Nicholas, Robin J.; Johnston, Michael B., E-mail: m.johnston@physics.ox.ac.uk [Department of Physics, University of Oxford, Clarendon Laboratory, Parks Road, Oxford OX1 3PU (United Kingdom)

2014-05-28T23:59:59.000Z

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

In-line thermoelectric module  

DOE Patents (OSTI)

A thermoelectric module with a plurality of electricity generating units each having a first end and a second end, the units being arranged first end to second end along an in-line axis. Each unit includes first and second elements each made of a thermoelectric material, an electrically conductive hot member arranged to heat one side of the first element, and an electrically conductive cold member arranged to cool another side of the first element and to cool one side of the second element. The hot member, the first element, the cold member and the second element are supported in a fixture, are electrically connected respectively to provide an electricity generating unit, and are arranged respectively in positions along the in-line axis. The individual components of each generating unit and the respective generating units are clamped in their in-line positions by a loading bolt at one end of the fixture and a stop wall at the other end of the fixture. The hot members may have a T-shape and the cold members an hourglass shape to facilitate heat transfer. The direction of heat transfer through the hot members may be perpendicular to the direction of heat transfer through the cold members, and both of these heat transfer directions may be perpendicular to the direction of current flow through the module.

Pento, Robert (Algonquin, IL); Marks, James E. (Glenville, NY); Staffanson, Clifford D. (S. Glens Falls, NY)

2000-01-01T23:59:59.000Z

382

In-Line Thermoelectric Module  

SciTech Connect

A thermoelectric module with a plurality of electricity generating units each having a first end and a second end, the units being arranged first end to second end along an-in-line axis. Each unit includes first and second elements each made of a thermoelectric material, an electrically conductive hot member arranged to heat one side of the first element, and an electrically conductive cold member arranged to cool another side of the first element and to cool one side of the second element. The hot member, the first element, the cold member and the second element are supported in a fixture, are electrically connected respectively to provide an electricity generating unit, and are arranged respectively in positions along the in-line axis. The individual components of each generating unit and the respective generating units are clamped in their in-line positions by a loading bolt at one end of the fixture and a stop wall at the other end of the fixture. The hot members may have a T-shape and the cold members an hourglass shape to facilitate heat transfer. The direction of heat transfer through the hot members may be perpendicular to the direction of heat transfer through the cold members, and both of these heat transfer directions maybe perpendicular to the direction-of current flow through the module.

Pento, Robert; Marks, James E.; Staffanson, Clifford D.

1998-07-28T23:59:59.000Z

383

Photovoltaic Energy Technology Module | Open Energy Information  

Open Energy Info (EERE)

Photovoltaic Energy Technology Module Photovoltaic Energy Technology Module Jump to: navigation, search Tool Summary Name: Photovoltaic Energy Technology Module Agency/Company /Organization: World Bank Sector: Energy Focus Area: Renewable Energy, Solar Topics: Technology characterizations Website: web.worldbank.org/WBSITE/EXTERNAL/TOPICS/EXTENERGY2/EXTRENENERGYTK/0,, References: Photovoltaic Energy Technology Module[1] Resources Portable Solar Photovoltaic Lanterns: Performance and Certification Specification, and Type Approval, ESMAP TECHNICAL PAPER 078 Testing of Storage Batteries used in Stand Alone Photovoltaic Power Systems, Test procedures and examples of test results Technical Specifications for Solar Home Systems (SHS), Rural Electrification and Renewable Energy Development (PV Component) Project

384

Frequencies Studies Applied to Photovoltaic Modules.  

E-Print Network (OSTI)

?? This master thesis proposes to study applications of frequencies studies to the case of photovoltaic modules and photovoltaic plants. Such studies are little used… (more)

Miquel, Clément

2011-01-01T23:59:59.000Z

385

Solid State Marx Modulators for Emerging Applications  

SciTech Connect

Emerging linear accelerator applications increasingly push the boundaries of RF system performance and economics. The power modulator is an integral part of RF systems whose characteristics play a key role in the determining parameters such as efficiency, footprint, cost, stability, and availability. Particularly within the past decade, solid-state switch based modulators have become the standard in high-performance, high power modulators. One topology, the Marx modulator, has characteristics which make it particularly attractive for several emerging applications. This paper is an overview of the Marx topology, some recent developments, and a case study of how this architecture can be applied to a few proposed linear accelerators.

Kemp, M.A.; /SLAC

2012-09-14T23:59:59.000Z

386

Natural Gas Transmission and Distribution Module  

Gasoline and Diesel Fuel Update (EIA)

U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2013 Natural Gas Transmission and Distribution Module The NEMS Natural Gas Transmission and...

387

Natural Gas Transmission and Distribution Module  

U.S. Energy Information Administration (EIA) Indexed Site

31, 2012, Washington, DC Major assumption changes for AEO2013 Oil and Gas Working Group Natural Gas Transmission and Distribution Module DRAFT WORKING GROUP PRESENTATION DO NOT...

388

Multiple Layer Graphene Optical Modulator - Energy Innovation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Advanced Materials Find More Like This Return to Search Multiple Layer Graphene Optical Modulator Lawrence Berkeley National Laboratory Contact LBL About This...

389

Silicon Photonics for Modulation, Switching, and Tuning  

Science Journals Connector (OSTI)

Thermal and electro-refractive silicon photonic modulators, switches, and tunable filters have been demonstrated with ultralow switching energies and high-speed operation. These...

Watts, Michael

390

D-modules on smooth toric varieties  

E-Print Network (OSTI)

D-MODULES ON SMOOTH TORIC VARIETIES. MIRCEA MUSTAT A, GREGORY G. SMITH, HARRISON TSAI,. AND ULI WALTHER. Abstract. Let X be a smooth ...

391

Encapsulation of High Temperature Thermoelectric Modules  

Energy.gov (U.S. Department of Energy (DOE))

Presents concept for hermetic encapsulation of TE modules addressing key failure mechanism, TE material oxidation, which severely impacts long term performance

392

Detailed Course Module Description | Department of Energy  

Energy Savers (EERE)

lists the course modules for building science courses offered at Cornell's Collaborator Sustainable Buildingi Practice course. coursemodule.pdf More Documents & Publications...

393

Explosives detection with a frequency modulation spectrometer  

Science Journals Connector (OSTI)

An explosives detection instrument was designed and tested at SRI International. The instrument uses frequency modulation spectroscopy with midinfrared lead-salt diode lasers to...

Riris, H; Carlisle, C B; McMillen, D F; Cooper, D E

1996-01-01T23:59:59.000Z

394

Oxygen Modulation via Microfluidic Devices Oxygen is a key but under-studied metabolic variable. It influences biological phenomena as diverse as  

E-Print Network (OSTI)

Oxygen Modulation via Microfluidic Devices Oxygen is a key but under-studied metabolic variable methods to modulate oxygen are crude and inefficient. Our lab has developed a suite of devices which can rapidly alter oxygen conditions surrounding cells in both position and time.[1-3]. Moreover, because

Ben-Arie, Jezekiel

395

Response: Issue Numbers and Librarianship  

Science Journals Connector (OSTI)

...some time. Put back the issue number. ALISON BAKER Librawy Jackson Laboratot), Bar...passage in which he supposes some unusually wise ape-like animal to have first thought...the approving nods and kindly grunts ofmy wise and most respected chief. And now I feel...

DANIEL E. KOSHLAND; JR.

1986-05-23T23:59:59.000Z

396

Model documentation Renewable Fuels Module of the National Energy Modeling System  

SciTech Connect

This report documents the objectives, analaytical approach and design of the National Energy Modeling System (NEMS) Renewable Fuels Module (RFM) as it relates to the production of the 1996 Annual Energy Outlook forecasts. The report catalogues and describes modeling assumptions, computational methodologies, data inputs, and parameter estimation techniques. A number of offline analyses used in lieu of RFM modeling components are also described.

NONE

1996-01-01T23:59:59.000Z

397

Brassinosteroid Regulates Cell Elongation by Modulating Gibberellin Metabolism in Rice  

Science Journals Connector (OSTI)

...Developmental Biology, Chinese Academy of Sciences, Beijing 100101, China b Department...of Microbiology, Chinese Academy of Sciences, Beijing 100101, China d State Key...Institute, Chinese Academy of Agricultural Sciences, Hangzhou 310006, China www.plantcell...

Hongning Tong; Yunhua Xiao; Dapu Liu; Shaopei Gao; Linchuan Liu; Yanhai Yin; Yun Jin; Qian Qian; Chengcai Chu

2014-11-04T23:59:59.000Z

398

Nitrated Cyclic GMP Modulates Guard Cell Signaling in Arabidopsis  

Science Journals Connector (OSTI)

...ODQ, a guanylate cyclase inhibitor, which suggests that an NO...Arabidopsis. Two guanylate cyclase inhibitors, ODQ and LY83583, prevented...response to UV-B, ABA, chitosan, and extracellular calmodulin...Supplemental Figure 1. Effect of Inhibitors on Stomatal Aperture. Supplemental...

Takahiro Joudoi; Yudai Shichiri; Nobuto Kamizono; Takaaki Akaike; Tomohiro Sawa; Jun Yoshitake; Naotaka Yamada; Sumio Iwai

2013-02-08T23:59:59.000Z

399

Module Title: Solid state and ultrafast lasers Module Code: OPTO6002  

E-Print Network (OSTI)

Module lecturers Prof Andy Clarkson, Dr Bill Brocklesby Contact (email ID) wac@orc.soton.ac.uk, wsb@orc

Anderson, Jim

400

PERFORMANCE ASSESSMENT OF PV MODULES RELATIONSHIP BETWEEN STC RATING AND FIELD PERFORMANCE  

E-Print Network (OSTI)

in the spectral distribution. They depend on average annual daylight temperature, but only very weakly on the temperature distribution. The two key module parameters that control the effective efficiency are series, such as standard test conditions (STC) with one-sun irradiance (1 kW/m 2 , AM1.5 spectrum) and cell temperature (Tj

Sites, James R.

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

EFFECTIVE EFFICIENCY AND PERFORMANCE RATIO AS ENERGY RATING SYSTEM FOR PV MODULES Marko Topic1  

E-Print Network (OSTI)

conditions (STC) with one-sun irradiance (G0 = 1 kW/m2 , AM1.5 spectrum) and cell temperature (Tj) of 25 º irradiance, ambient temperature, and solar- incidence-angle distributions at the installation site daylight ambient temperature. Five PV modules are evaluated by both approaches in Ljubljana for different

Sites, James R.

402

Spatially resolved non-invasive chemical stimulation for modulation of signalling in reconstructed neuronal networks  

Science Journals Connector (OSTI)

...Spatially resolved non-invasive chemical stimulation for modulation...Localized non-invasive on-chip chemical stimulation of micropatterned...and N Voelker2004A biochip platform for cell transfection assaysBiosens...and M Nishizawa2005Localized chemical stimulation of cellular micropatterns...

2006-01-01T23:59:59.000Z

403

BSc/MSci Human Biology (C103/C106) Module Information  

E-Print Network (OSTI)

their function. Energy: how it governs cellular processes, how it is stored in foods; how energy is used by cells cycles, early development. #12;Introduction to Evolution and Animal Biology This module examines how the primary research literature, and consideration of scientific ethics complement the training. Molecular

Birmingham, University of

404

Electric Field Modulation of the Membrane Potential in Solid-State Ion Channels  

E-Print Network (OSTI)

channel. KEYWORDS: Nanochannel, membrane potential, electrofluidic gating, ion transport, salinityElectric Field Modulation of the Membrane Potential in Solid-State Ion Channels Weihua Guan a rapid flow of ions across the cell membrane. Normal physiological functions, such as generating action

Reed, Mark

405

Computing Betti Numbers via Combinatorial Laplacians  

E-Print Network (OSTI)

Computing Betti Numbers via Combinatorial Laplacians method to compute Betti numbers of sim- plicial complexes. This has a number of advantages over are the Betti numbers, the i-th Betti number, bi= bi(X), being the rank of Hi(X). The Betti numbers often have

Friedman, Joel

406

Module No: 410331International Trade LawModule Title: Pre-requisite  

E-Print Network (OSTI)

and technology transfer contracts; also, a brief study of international trade arbitration and its rulesModule No: 410331International Trade LawModule Title: Pre-requisite: Module Type: specialization Description The international trade law course is a brief study of the topics of electronic commerce

407

Modular ITT Module D Modular ITT Module D Version 1 16/02/2012  

E-Print Network (OSTI)

manage health and safety at work. Your responses should include: basic statement on safety awarenessModular ITT ­ Module D Modular ITT ­ Module D Version 1 16/02/2012 Module D ­ Health & Safety an overall failing of your bid. This section allows us to assess your competency for health and safety. We

408

AC PV Modules Take a standard DC PV module and connect a microinverter  

E-Print Network (OSTI)

modules. These inverters range in power from 700 watts up to 1 megawatt. DC maximum system voltages can and up to 13 inverters for the 210 W version to be installed on the same AC output cable. home power 136, and secure a listing to UL1741 for a pre-assembled module/inverter device, and you have an AC PV module

Johnson, Eric E.

409

Optimization of Fuel Cell System Operating Conditions for Fuel Cell Vehicles  

E-Print Network (OSTI)

An Indirect Methanol Pem Fuel Cell System, SAE 2001, (paperof automotive PEM fuel cell stacks, SAE 2000 (paper number1009). for an automotive PEM fuel cell system with imbedded

Zhao, Hengbing; Burke, Andy

2008-01-01T23:59:59.000Z

410

Modulation Extension Control of Hybrid Cascaded H-Bridge Multilevel Converters with 7-Level Fundamental Frequency Switching Scheme  

SciTech Connect

This paper presents a modulation extension control algorithm for hybrid cascaded H-bridge multilevel converters. The hybrid cascaded H-bridge multilevel motor drive using only a single DC source for each phase is promising for high power motor drive applications since it can greatly decrease the number of required DC power supplies, has high quality output power due to its high number of output levels, and has high conversion efficiency and low thermal stress by using fundamental frequency switching scheme. But one disadvantage of the 7-level fundamental frequency switching scheme is that its modulation index range is too narrow when capacitor's voltage balance is maintained. The proposed modulation extension control algorithm can greatly increase capacitors' charging time and decrease the capacitors' discharging time by injecting triplen harmonics to extend the modulation index range of the hybrid cascaded H-bridge multilevel converters.

Du, Zhong [ORNL; Ozpineci, Burak [ORNL; Tolbert, Leon M [ORNL

2007-01-01T23:59:59.000Z

411

RIN Number 1904-AB68  

NLE Websites -- All DOE Office Websites (Extended Search)

Federal Procurement of Energy Efficient Products Federal Procurement of Energy Efficient Products RIN NUMBER: 1904-AB68 CLOSING DATE: August 20, 2007 COMMENT NUMBER DATE RECEIVED/ DATE OF LETTER NAME & TITLE OF COMMENTATOR AFFILIATION & ADDRESS OF COMMENTATOR 1 ? 7/31/07 Edwin Pinero Federal Environmental Executive Office of the Federal Environmental Executive 1200 Pennsylvania Avenue, NW Mail Code 1600J Washington, DC 20460 2 8/8/07 (e-mail) Bob Null President Arkansas Lamp Manufacturing bnull@arkansaslamp.com 3 8/10/07 (e-mail) Dawn Gunning Environmental Program Manager Department of Justice Dawn.M.Gunning@usdoj.gov 4 8/14/07 8/14/07 Kyle Pitsor Vice President, Government Relations National Electrical Manufacturers Association 1300 North 17th Street, Suite 1752 Rosslyn, VA 22209

412

RIN Number 1904-AB68  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

RULEMAKING TITLE: Federal Procurement of Energy Efficient Products RULEMAKING TITLE: Federal Procurement of Energy Efficient Products RIN NUMBER: 1904-AB68 CLOSING DATE: August 20, 2007 COMMENT NUMBER DATE RECEIVED/ DATE OF LETTER NAME & TITLE OF COMMENTATOR AFFILIATION & ADDRESS OF COMMENTATOR 1 ? 7/31/07 Edwin Pinero Federal Environmental Executive Office of the Federal Environmental Executive 1200 Pennsylvania Avenue, NW Mail Code 1600J Washington, DC 20460 2 8/8/07 (e-mail) Bob Null President Arkansas Lamp Manufacturing bnull@arkansaslamp.com 3 8/10/07 (e-mail) Dawn Gunning Environmental Program Manager Department of Justice Dawn.M.Gunning@usdoj.gov 4 8/14/07 8/14/07 Kyle Pitsor Vice President, Government Relations National Electrical Manufacturers Association 1300 North 17th Street, Suite 1752

413

RL·721 Document ID Number:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Document ID Number: Document ID Number: REV 3 NEPA REVIEW SCREENING FORM DOE/CX-00045 . J.proj(;l~t Titl~: - - - -- - - - - - - - - - - - - - - - - - -- --------- ------_. . _ - - - - - - - - - - - - - . - - - - - - - - - - - - - - - - - - - LIMITED FIREBREAK MAINTENANCE ON THE HANFORD SITE DURING CALENDAR YEAR 2012 II. Project Description and Location (including Time Period over which proposed action will occur and Project Dimensions· e.g., acres displaced/disturbed, excavation length/depth, etc.): The Department of Energy (DOE) proposes to perform firebreak maintenance in selected areas of the Hanford Site during calendar year 2012 with limited use of physical, chemical, and prescribed burning methods. Prescribed burning will be performed by the Hanford Fire Department under approved burn plans and permits; and only in previously disturbed

414

Testing Protocol for Module Encapsulant Creep (Presentation)  

SciTech Connect

Recently there has been an interest in the use of thermoplastic encapsulant materials in photovoltaic modules to replace chemically crosslinked materials, e.g., ethylene-vinyl acetate. The related motivations include the desire to: reduce lamination time or temperature; use less moisture-permeable materials; or use materials with better corrosion characteristics. However, the use of any thermoplastic material in a high-temperature environment raises safety and performance concerns, as the standardized tests currently do not expose the modules to temperatures in excess of 85C, yet modules may experience temperatures above 100C in operation. Here we constructed eight pairs of crystalline-silicon modules and eight pairs of glass/encapsulation/glass mock modules using different encapsulation materials of which only two were designed to chemically crosslink. One module set was exposed outdoors with insulation on the back side in Arizona in the summer, and an identical set was exposed in environmental chambers. High precision creep measurements and performance measurements indicate that despite many of these polymeric materials being in the melt state at some of the highest outdoor temperatures achievable, very little creep was seen because of their high viscosity, temperature heterogeneity across the modules, and in the case of the crystalline-silicon modules, the physical restraint of the backsheet. These findings have very important implications for the development of IEC and UL qualification and safety standards, and in regards to the necessary level of cure during the processing of crosslinking encapsulants.

Kempe, M. D.; Miller, D. C.; Wohlgemuth, J. H.; Kurtz, S. R.; Moseley, J. M.; Shah, Q.; Tamizhmani, G.; Sakurai, K.; Inoue, M.; Doi, T.; Masuda, A.

2012-02-01T23:59:59.000Z

415

Nutrient Management Module No. 12 Water Quality  

E-Print Network (OSTI)

Nutrient Management Module No. 12 Water Quality Considerations and Regulations by Susan Mc Management Competency Area II: Nutrient movement in soil and water. Objectives After completing this module issues 3.Become familiar with federal and state water quality regulations 4.Identify Best Management

Lawrence, Rick L.

416

Identification coding schemes for modulated reflectance systems  

DOE Patents (OSTI)

An identifying coding apparatus employing modulated reflectance technology involving a base station emitting a RF signal, with a tag, located remotely from the base station, and containing at least one antenna and predetermined other passive circuit components, receiving the RF signal and reflecting back to the base station a modulated signal indicative of characteristics related to the tag.

Coates, Don M. (Santa Fe, NM); Briles, Scott D. (Los Alamos, NM); Neagley, Daniel L. (Albuquerque, NM); Platts, David (Santa Fe, NM); Clark, David D. (Santa Fe, NM)

2006-08-22T23:59:59.000Z

417

Workplace Training Module: Enhancing Ecotourism Business Performance  

E-Print Network (OSTI)

Workplace Training Module: Enhancing Ecotourism Business Performance (Level 5 ­ 10 credits as part on understanding best practice in ecotourism development and management (see second part of Appendix 1). The module focuses on the ecotourism business dimension ­ emphasizing best case examples of what creates successful

418

Electro-Optic Modulation of Single Photons  

E-Print Network (OSTI)

We use the Stokes photon of a biphoton pair to set the time origin for electro-optic modulation of the wave function of the anti-Stokes photon thereby allowing arbitrary phase and amplitude modulation. We demonstrate conditional single-photon wave functions composed of several pulses, or instead, having gaussian or exponential shapes.

Pavel Kolchin; Chinmay Belthangady; Shengwang Du; G. Y. Yin; S. E. Harris

2008-08-02T23:59:59.000Z

419

Module Handbook Core Univ. of Oldenburg  

E-Print Network (OSTI)

· Mechanical and Electrical Systems of the WEC Content: Energy conversion process in Wind Turbines · Wind/EUREC Course 2008/2009 #12;EUREC Core Courses at University of Oldenburg, 1st Semester Wind Energy Module Module Description: Wind Energy Field: Core Oldenburg Courses: Wind Energy Wind Energy

Habel, Annegret

420

Raising the Bar for Quality PV Modules  

Office of Energy Efficiency and Renewable Energy (EERE)

Since the development and codification of testing standards for PV modules requires a lengthy multiyear process, Department of Energy’s SunShot Initiative and National Renewable Energy Laboratory worked together on an accelerated schedule for nine months in 2013 to develop a voluntary standard that goes beyond current test protocols to qualify superior PV modules.

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

21.9% efficient silicon bifacial solar cells  

SciTech Connect

This paper reports the efficiency of bifacial silicon solar cells and mini-modules fabricated at SunPower Corp. The best cell has AM1.5G front efficiency of 21.9% and rear efficiency of 13.9%. The mini-modules, each containing 20 bifacial cells, attain efficiency as high as the average efficiency of their individual cells. The best module has AM1.5G front efficiency of 20.66% and rear efficiency of 10.54%. Optical properties of the bifacial cells have also been measured and analyzed. The results show that bifacial cells, compared to monofacial cells, absorb less infrared light and thus they can operate at lower temperature in space.

Zhou, C.Z.; Verlinden, P.J.; Crane, R.A.; Swanson, R.M. [SunPower Corp., Sunnyvale, CA (United States); Sinton, R.A. [Sinton Consulting, San Jose, CA (United States)

1997-12-31T23:59:59.000Z

422

Ferroelectric modulation on resonant tunneling through perovskite double-barriers  

SciTech Connect

The negative differential resistance (NDR) due to resonance tunneling is achieved at room temperature in perovskite double-barrier heterostructures composed of a 10 unit-cell-thick SrTiO{sub 3} quantum well sandwiched in two 10 unit-cell-thick LaAlO{sub 3} barriers. The NDR occurs at 1.2?V and does not change with voltage cycling. When the paraelectric SrTiO{sub 3} quantum well is replaced by a ferroelectric BaTiO{sub 3}, the onset of the NDR can be modulated by polarization switching in the ultrathin BaTiO{sub 3}. A polarization pointing to the collector lowers the NDR voltage but a polarization pointing to the emitter increases it. The shift of the NDR voltage is ascribed to reversal of the extra electric field in the quantum well due to the polarization switching.

Du, Ruifang; Qiu, Xiangbiao; Li, Aidong; Wu, Di, E-mail: diwu@nju.edu.cn [National Laboratory of Solid State Microstructures and Department of Materials Science and Engineering, College of Engineering and Applied Sciences, Nanjing University, Nanjing 210093 (China)

2014-04-07T23:59:59.000Z

423

Ion transport membrane module and vessel system  

DOE Patents (OSTI)

An ion transport membrane system comprising (a) a pressure vessel having an interior, an exterior, an inlet, and an outlet; (b) a plurality of planar ion transport membrane modules disposed in the interior of the pressure vessel and arranged in series, each membrane module comprising mixed metal oxide ceramic material and having an interior region and an exterior region, wherein any inlet and any outlet of the pressure vessel are in flow communication with exterior regions of the membrane modules; and (c) one or more gas manifolds in flow communication with interior regions of the membrane modules and with the exterior of the pressure vessel. The ion transport membrane system may be utilized in a gas separation device to recover oxygen from an oxygen-containing gas or as an oxidation reactor to oxidize compounds in a feed gas stream by oxygen permeated through the mixed metal oxide ceramic material of the membrane modules.

Stein, VanEric Edward (Allentown, PA); Carolan, Michael Francis (Allentown, PA); Chen, Christopher M. (Allentown, PA); Armstrong, Phillip Andrew (Orefield, PA); Wahle, Harold W. (North Canton, OH); Ohrn, Theodore R. (Alliance, OH); Kneidel, Kurt E. (Alliance, OH); Rackers, Keith Gerard (Louisville, OH); Blake, James Erik (Uniontown, OH); Nataraj, Shankar (Allentown, PA); Van Doorn, Rene Hendrik Elias (Obersulm-Willsbach, DE); Wilson, Merrill Anderson (West Jordan, UT)

2012-02-14T23:59:59.000Z

424

Ion transport membrane module and vessel system  

DOE Patents (OSTI)

An ion transport membrane system comprising (a) a pressure vessel having an interior, an exterior, an inlet, and an outlet; (b) a plurality of planar ion transport membrane modules disposed in the interior of the pressure vessel and arranged in series, each membrane module comprising mixed metal oxide ceramic material and having an interior region and an exterior region, wherein any inlet and any outlet of the pressure vessel are in flow communication with exterior regions of the membrane modules; and (c) one or more gas manifolds in flow communication with interior regions of the membrane modules and with the exterior of the pressure vessel.The ion transport membrane system may be utilized in a gas separation device to recover oxygen from an oxygen-containing gas or as an oxidation reactor to oxidize compounds in a feed gas stream by oxygen permeated through the mixed metal oxide ceramic material of the membrane modules.

Stein, VanEric Edward (Allentown, PA); Carolan, Michael Francis (Allentown, PA); Chen, Christopher M. (Allentown, PA); Armstrong, Phillip Andrew (Orefield, PA); Wahle, Harold W. (North Canton, OH); Ohrn, Theodore R. (Alliance, OH); Kneidel, Kurt E. (Alliance, OH); Rackers, Keith Gerard (Louisville, OH); Blake, James Erik (Uniontown, OH); Nataraj, Shankar (Allentown, PA); van Doorn, Rene Hendrik Elias (Obersulm-Willsbach, DE); Wilson, Merrill Anderson (West Jordan, UT)

2008-02-26T23:59:59.000Z

425

A Comparison of Key PV Backsheet and Module Properties from Fielded...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

of Key PV Backsheet and Module Properties from Fielded Module Exposures and Accelerated Test Conditions A Comparison of Key PV Backsheet and Module Properties from Fielded Module...

426

Two of Three Power Plant Modules at Neal Hot Springs Are Producing up to  

Open Energy Info (EERE)

of Three Power Plant Modules at Neal Hot Springs Are Producing up to of Three Power Plant Modules at Neal Hot Springs Are Producing up to 16.8 Megawatts Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: Two of Three Power Plant Modules at Neal Hot Springs Are Producing up to 16.8 Megawatts Abstract N/A Author U.S. Geothermal Inc. Published Publisher Not Provided, 2012 Report Number N/A DOI Not Provided Check for DOI availability: http://crossref.org Online Internet link for Two of Three Power Plant Modules at Neal Hot Springs Are Producing up to 16.8 Megawatts Citation U.S. Geothermal Inc.. 2012. Two of Three Power Plant Modules at Neal Hot Springs Are Producing up to 16.8 Megawatts. Boise Idaho: (!) . Report No.: N/A. Retrieved from "http://en.openei.org/w/index.php?title=Two_of_Three_Power_Plant_Modules_at_Neal_Hot_Springs_Are_Producing_up_to_16.8_Megawatts&oldid=682768"

427

Hydrogen Consumption Measurement Research Platform for Fuel Cell Vehicles  

Science Journals Connector (OSTI)

Hydrogen consumption measurement research platform is designed for fuel economy test of the proton exchange membrane fuel cell vehicle (PEM FCV). Hardware is constructed with industrial PC (IPC), field bus data acquisition module and device control module. ... Keywords: Hydrogen Consumption Measuremen, LabVIEW, Data Acquisition

Fang Maodong; Chen Mingjie; Lu Qingchun; Jin Zhenhua

2010-06-01T23:59:59.000Z

428

Stereocilia displacement induced somatic motility of cochlear outer hair cells  

Science Journals Connector (OSTI)

...estimated that the electrical resistance of the excluded membrane of...mechanical) modulation of apical resistance and dc (electrical) polarization...membrane are omitted from this elementary model (28). Fig. 1B Inset...modulates the cell's apical resistance by opening and closing of...

B N Evans; P Dallos

1993-01-01T23:59:59.000Z

429

A Graphene-based Polarization-Insensitive Optical Modulator  

Science Journals Connector (OSTI)

We present a polarization-insensitive modulator. The performance of the designed modulator is comprehensively evaluated, showing a 3-dB modulation with 910-nm long waveguide, an...

hu, xiao; Gui, Chengcheng; Wang, Jian

430

CHARGED PARTICLE IDENTIFICATION WITH MODULES OF THE PLASTIC BALL  

E-Print Network (OSTI)

WITH MODULES OF THE PLASTIC BALL H.H. Gutbrod, M.R. Maier,WITH MODULES OF THE PLASTIC BALL H.H. Gutbrod, M.R. Maier*,of modules of the Plastic Ball detector for positive pions

Gutbrod, H.H.

2010-01-01T23:59:59.000Z

431

DOE Hydrogen and Fuel Cells Program Record #13007: Industry Deployed Fuel Cell Backup Power (BuP)  

Energy.gov (U.S. Department of Energy (DOE))

This record from the DOE Hydrogen and Fuel Cells Program describes the number of current and planned fuel cell deployments for backup power applications.

432

DISSERTATION ANALYSIS OF IMPACT OF NON-UNIFORMITIES ON THIN-FILM SOLAR CELLS  

E-Print Network (OSTI)

-scale problems such as energy demand, pollution, and environment safety. The cost ($/kWh) is the primaryDISSERTATION ANALYSIS OF IMPACT OF NON-UNIFORMITIES ON THIN-FILM SOLAR CELLS AND MODULES WITH 2-D-FILM SOLAR CELLS AND MODULES WITH 2-D SIMULATIONS BE ACCEPTED AS FULFILLING IN PART REQUIREMENTS

Sites, James R.

433

Approved Module Information for EE2EDP, 2014/5 Module Title/Name: Electronics Design Project Module Code: EE2EDP  

E-Print Network (OSTI)

Code: EE2EDP School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Engineering Systems. BEng Electrical and Electronic Engineering. BEng Electronic Engineering and Computer competition among the groups to produce a 'best' system. * Students will be required to use creativity

Neirotti, Juan Pablo

434

Computing Betti Numbers via Combinatorial Joel Friedman  

E-Print Network (OSTI)

Computing Betti Numbers via Combinatorial Laplacians Joel Friedman Department of Mathematics 1984 Abstract We use the Laplacian and power method to compute Betti numbers of sim­ plicial complexes. This has are the Betti numbers, the i­th Betti number, b i = b i (X), being the rank of H i (X). The Betti numbers often

Friedman, Joel

435

Grantee Total Number of Homes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Grantee Grantee Total Number of Homes Weatherized through November 2011 [Recovery Act] Total Number of Homes Weatherized through November 2011 (Calendar Year 2009 - November 2011) [Recovery Act + Annual Program Funding] Alabama 6,704 7,867 1 Alaska 443 2,363 American Samoa 304 410 Arizona 6,354 7,518 Arkansas 5,231 6,949 California 41,649 50,002 Colorado 12,782 19,210 Connecticut 8,940 10,009 2 Delaware** 54 54 District of Columbia 962 1,399 Florida 18,953 20,075 Georgia 13,449 14,739 Guam 574 589 Hawaii 604 1,083 Idaho** 4,470 6,614 Illinois 35,530 44,493 Indiana** 18,768 21,689 Iowa 8,794 10,202 Kansas 6,339 7,638 Kentucky 7,639 10,902 Louisiana 4,698 6,946 Maine 5,130 6,664 Maryland 8,108 9,015 Massachusetts 17,687 21,645 Michigan 29,293 37,137 Minnesota 18,224 22,711 Mississippi 5,937 6,888 Missouri 17,334 20,319 Montana 3,310 6,860 Navajo Nation

436

Farey tree and devil's staircase of a modulated external-cavity semiconductor laser  

SciTech Connect

We report frequency locking at Farey fractions of an electrically modulated semiconductor laser within an external cavity. The winding numbers as a function of the ratio of the modulation frequency to inverse resonator round trip time show the hierarchy of a Farey tree and the structure of a devil's staircase. The dimension of the set complementary to the stairs is determined to be 0.89. This demonstrates that the external-cavity semiconductor laser exhibits the universal properties characteristic for nonlinear systems driven by two competing frequencies.

Baums, D.; Elsasser, W.; Gobel, E. O.

1989-07-10T23:59:59.000Z

437

Analysis of assembly serial number usage in domestic light-water reactors  

SciTech Connect

Domestic light-water reactor (LWR) fuel assemblies are identified by a serial number that is placed on each assembly. These serial numbers are used as identifiers throughout the life of the fuel. The uniqueness of assembly serial numbers is important in determining their effectiveness as unambiguous identifiers. The purpose of this study is to determine what serial numbering schemes are used, the effectiveness of these schemes, and to quantify how many duplicate serial numbers occur on domestic LWR fuel assemblies. The serial numbering scheme adopted by the American National Standards Institute (ANSI) ensures uniqueness of assembly serial numbers. The latest numbering scheme adopted by General Electric (GE), was also found to be unique. Analysis of 70,971 fuel assembly serial numbers from permanently discharged fuel identified 11,948 serial number duplicates. Three duplicate serial numbers were found when analysis focused on duplication within the individual fuel inventory at each reactor site, but these were traced back to data entry errors and will be corrected by the Energy Information Administration (EIA). There were also three instances where the serial numbers used to identify assemblies used for hot cell studies differed from the serial numbers reported to the EIA. It is recommended that fuel fabricators and utilities adhere to the ANSI serial numbering scheme to ensure serial number uniqueness. In addition, organizations collecting serial number information, should request that all known serial numbers physically attached or associated with each assembly be reported and identified by the corresponding number scheme. 10 refs., 5 tabs.

Reich, W.J. (Oak Ridge National Lab., TN (USA)); Moore, R.S. (Automated Sciences Group, Inc., Oak Ridge, TN (USA))

1991-05-01T23:59:59.000Z

438

Criticality Calculations for Step?2 GPHS Modules  

Science Journals Connector (OSTI)

The Multi?Mission Radioisotope Thermoelectric Generator (MMRTG) will use an improved version of the General Purpose Heat Source (GPHS) module as its source of thermal power. This new version referred to as the Step?2 GPHS Module has additional and thicker layers of carbon fiber material (Fine Weaved Pierced Fabric) for increased strength over the original GPHS module. The GPHS uses alpha decay of 238 Pu in the oxide form as the primary source of heat and small amounts of other actinides are also present in the oxide fuel. Criticality calculations have been performed by previous researchers on the original version of the GPHS module (Step 0). This paper presents criticality calculations for the present Step?2 version. The Monte Carlo N?Particle eXtended code (MCNPX) was used for these calculations. Numerous configurations of GPHS module arrays surrounded by wet sand and other materials (to reflect the neutrons back into the stack with minimal absorption) were modeled. For geometries with eight GPHS modules (from a single MMRTG) surrounded by wet sand the configuration is extremely sub?critical; k eff is about 0.3. It requires about 1000 GPHS modules (from 125 MMRTGs) in a close?spaced stack to approach criticality ( k eff ?=?1.0) when surrounded by wet sand. The effect of beryllium in the MMRTG was found to be relatively small.

Ronald J. Lipinski; Danielle L. Hensen

2008-01-01T23:59:59.000Z

439

Criticality Calculations for Step-2 GPHS Modules  

SciTech Connect

The Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) will use an improved version of the General Purpose Heat Source (GPHS) module as its source of thermal power. This new version, referred to as the Step-2 GPHS Module, has additional and thicker layers of carbon fiber material (Fine Weaved Pierced Fabric) for increased strength over the original GPHS module. The GPHS uses alpha decay of {sup 238}Pu in the oxide form as the primary source of heat, and small amounts of other actinides are also present in the oxide fuel. Criticality calculations have been performed by previous researchers on the original version of the GPHS module (Step 0). This paper presents criticality calculations for the present Step-2 version. The Monte Carlo N-Particle eXtended code (MCNPX) was used for these calculations. Numerous configurations of GPHS module arrays surrounded by wet sand and other materials (to reflect the neutrons back into the stack with minimal absorption) were modeled. For geometries with eight GPHS modules (from a single MMRTG) surrounded by wet sand, the configuration is extremely sub-critical; k{sub eff} is about 0.3. It requires about 1000 GPHS modules (from 125 MMRTGs) in a close-spaced stack to approach criticality (k{sub eff} = 1.0) when surrounded by wet sand. The effect of beryllium in the MMRTG was found to be relatively small.

Lipinski, Ronald J. [Advanced Nuclear Concepts Department, Sandia National Laboratories, P.O Box 5800, Albuquerque, NM 87185 (United States); Hensen, Danielle L. [Risk and Reliability Department Sandia National Laboratories, P.O Box 5800, Albuquerque, NM 87185 (United States)

2008-01-21T23:59:59.000Z

440

Criticality calculations for Step-2 GPHS modules.  

SciTech Connect

The Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) will use an improved version of the General Purpose Heat Source (GPHS) module as its source of thermal power. This new version, referred to as the Step-2 GPHS Module, has additional and thicker layers of carbon fiber material (Fine Weaved Pierced Fabric) for increased strength over the original GPHS module. The GPHS uses alpha decay of {sup 238}Pu in the oxide form as the primary source of heat, and small amounts of other actinides are also present in the oxide fuel. Criticality calculations have been performed by previous researchers on the original version of the GPHS module (Step 0). This paper presents criticality calculations for the present Step-2 version. The Monte Carlo N-Particle eXtended code (MCNPX) was used for these calculations. Numerous configurations of GPHS module arrays surrounded by wet sand and other materials (to reflect the neutrons back into the stack with minimal absorption) were modeled. For geometries with eight GPHS modules (from a single MMRTG) surrounded by wet sand, the configuration is extremely sub-critical; k{sub eff} is about 0.3. It requires about 1000 GPHS modules (from 125 MMRTGs) in a close-spaced stack to approach criticality (k{sub eff} = 1.0) when surrounded by wet sand. The effect of beryllium in the MMRTG was found to be relatively small.

Hensen, Danielle Lynn; Lipinski, Ronald J.

2007-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Tematea: Issue Based Modules for Coherent Implementation of Biodiversi...  

Open Energy Info (EERE)

Tematea: Issue Based Modules for Coherent Implementation of Biodiversity Conventions Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Tematea: Issue Based Modules for...

442

Agenda for the PV Module Reliability Workshop, February 26 -...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Agenda for the PV Module Reliability Workshop, February 26 - 27 2013, Golden, Colorado Agenda for the PV Module Reliability Workshop, February 26 - 27 2013, Golden, Colorado This...

443

NREL: Performance and Reliability R&D - PV Module Reliability...  

NLE Websites -- All DOE Office Websites (Extended Search)

Reliability R and D Printable Version PV Module Reliability Workshop NREL hosts an annual Photovoltaic Module Reliability Workshop (PVMRW) so that solar technology experts can...

444

Microsoft Word - APRIL 2009 PMCDP Module CHRIS ESSTutorial_ROTATION...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Microsoft Word - APRIL 2009 PMCDP Module CHRIS ESS TutorialROTATIONWITHINDUSTRY.doc Microsoft Word - APRIL 2009 PMCDP Module CHRIS ESS TutorialROTATIONWITHINDUSTRY.doc...

445

Microsoft Word - APRIL 2009 PMCDP Module CHRIS ESSTutorial_ESTABLISHI...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ESTABLISHINGAPROFILE.doc Microsoft Word - APRIL 2009 PMCDP Module CHRIS ESS TutorialESTABLISHINGAPROFILE.doc Microsoft Word - APRIL 2009 PMCDP Module CHRIS ESS...

446

Energy Efficiency at Home - An Interdisciplinary Module for Energy...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Efficiency at Home - An Interdisciplinary Module for Energy Education Energy Efficiency at Home - An Interdisciplinary Module for Energy Education Below is information about the...

447

SunShot Presentation PV Module Reliabity Workshop Opening Session...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SunShot Presentation PV Module Reliabity Workshop Opening Session SunShot Presentation PV Module Reliabity Workshop Opening Session This PowerPoint slide deck was originally...

448

SunShot Presentation PV Module Reliabity Workshop Opening Session  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2013 PV Module Reliability Workshop Feb 26- 27, 2013, Golden, CO * The SunShot Initiative * Systems Integration Technology Validation Activities * 2013 PV Module Reliability...

449

Module: Emission Factors for Deforestation | Open Energy Information  

Open Energy Info (EERE)

Website: www.leafasia.orgtoolstechnical-guidance-series-emission-factors-defo Cost: Free Language: English Module: Emission Factors for Deforestation Screenshot Logo: Module:...

450

Module: Activity Data for Deforestation | Open Energy Information  

Open Energy Info (EERE)

Website: www.leafasia.orgtoolstechnical-guidance-series-activity-data-defores Cost: Free Language: English Module: Activity Data for Deforestation Screenshot Logo: Module:...

451

Chirped Laser Dispersion Spectroscopy with Directly Modulated Quantum Cascade Laser  

Science Journals Connector (OSTI)

A feasibility study of chirped laser dispersion spectroscopy (CLaDS) with utilizing direct modulation of a quantum cascade laser instead of external modulators is presented....

Hangauer, Andreas; Spinner, Georg; Nikodem, Michal; Wysocki, Gerard

452

Statistical and Domain Analytics Applied to PV Module Lifetime...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

on PV Modules Failure Rates from Certification Testing to UL and IEC Standards for Flat Plate PV Modules Accelerated Stress Testing, Qualification Testing, HAST, Field Experience...

453

Fuel cell based battery-less ups system  

E-Print Network (OSTI)

emerged as one of the most promising sources for both portable and stationary applications. In this thesis, a new battery less UPS system configuration powered by fuel cell is discussed. The proposed topology utilizes a standard offline UPS module...

Venkatagiri Chellappan, Mirunalini

2008-10-10T23:59:59.000Z

454

Total Number of Operable Refineries  

U.S. Energy Information Administration (EIA) Indexed Site

Data Series: Total Number of Operable Refineries Number of Operating Refineries Number of Idle Refineries Atmospheric Crude Oil Distillation Operable Capacity (B/CD) Atmospheric Crude Oil Distillation Operating Capacity (B/CD) Atmospheric Crude Oil Distillation Idle Capacity (B/CD) Atmospheric Crude Oil Distillation Operable Capacity (B/SD) Atmospheric Crude Oil Distillation Operating Capacity (B/SD) Atmospheric Crude Oil Distillation Idle Capacity (B/SD) Vacuum Distillation Downstream Charge Capacity (B/SD) Thermal Cracking Downstream Charge Capacity (B/SD) Thermal Cracking Total Coking Downstream Charge Capacity (B/SD) Thermal Cracking Delayed Coking Downstream Charge Capacity (B/SD Thermal Cracking Fluid Coking Downstream Charge Capacity (B/SD) Thermal Cracking Visbreaking Downstream Charge Capacity (B/SD) Thermal Cracking Other/Gas Oil Charge Capacity (B/SD) Catalytic Cracking Fresh Feed Charge Capacity (B/SD) Catalytic Cracking Recycle Charge Capacity (B/SD) Catalytic Hydro-Cracking Charge Capacity (B/SD) Catalytic Hydro-Cracking Distillate Charge Capacity (B/SD) Catalytic Hydro-Cracking Gas Oil Charge Capacity (B/SD) Catalytic Hydro-Cracking Residual Charge Capacity (B/SD) Catalytic Reforming Charge Capacity (B/SD) Catalytic Reforming Low Pressure Charge Capacity (B/SD) Catalytic Reforming High Pressure Charge Capacity (B/SD) Catalytic Hydrotreating/Desulfurization Charge Capacity (B/SD) Catalytic Hydrotreating Naphtha/Reformer Feed Charge Cap (B/SD) Catalytic Hydrotreating Gasoline Charge Capacity (B/SD) Catalytic Hydrotreating Heavy Gas Oil Charge Capacity (B/SD) Catalytic Hydrotreating Distillate Charge Capacity (B/SD) Catalytic Hydrotreating Kerosene/Jet Fuel Charge Capacity (B/SD) Catalytic Hydrotreating Diesel Fuel Charge Capacity (B/SD) Catalytic Hydrotreating Other Distillate Charge Capacity (B/SD) Catalytic Hydrotreating Residual/Other Charge Capacity (B/SD) Catalytic Hydrotreating Residual Charge Capacity (B/SD) Catalytic Hydrotreating Other Oils Charge Capacity (B/SD) Fuels Solvent Deasphalting Charge Capacity (B/SD) Catalytic Reforming Downstream Charge Capacity (B/CD) Total Coking Downstream Charge Capacity (B/CD) Catalytic Cracking Fresh Feed Downstream Charge Capacity (B/CD) Catalytic Hydro-Cracking Downstream Charge Capacity (B/CD) Period:

455

Modulated voltage metastable ionization detector  

SciTech Connect

Metastable ionization detectors used for chromatographic analysis usually employa fixed high voltage for the ionization potential. For this reason, the operating range is limited to about three orders of magnitude. By use of the technique disclosed in the instant invention, operating ranges of about nine orders of magnitude are obtained. The output current from a metastable ionization detector (MID) is applied to a modulation voltage circuit. An adjustment is made to balance out the background current, and an output current, above background, is applied to an input of a strip chart recorder. For low level concentrations, i.e., low detected output current, the ionization potential will be at a maximum and the metastable ionization detector will operate at its most sensitive level. When the detected current from the metastable ionization detector increases above a predetermined threshold level, a voltage control circuit is activated which turns on a high voltage transistor which acts to reduce the ionization potential. The ionization potential applied to the metastable ionization detector is then varied so as to maintain the detected signal level constant. The variation in ionization potential is now related to the concentration fo the constituent and a representative amplitude is applied to another input of said strip chart recorder.

Carle, G. C.; Humphry, D. E.; Kojiro, D. R.

1985-08-27T23:59:59.000Z

456

Approved Module Information for CE2004, 2014/5 Module Title/Name: Transfer Processes Module Code: CE2004  

E-Print Network (OSTI)

tubes. Natural convection from pipes. Thermal radiation fundamentals, view factors, radiation exchange classes, directed reading, coursework exercises, tutorial support Module Assessment Methods of Assessment & associated weighting (including approaches to formative assessment as well as summative): Assessment Type

Neirotti, Juan Pablo

457

Approved Module Information for CE2105, 2014/5 Module Title/Name: Process Simulation Module Code: CE2105  

E-Print Network (OSTI)

the program to processes in chemicals manufacturing, power generation and petrochemical refining skills #12;* Ability to communicate effectively in writing and through technical diagrams * Problem reading, coursework exercises, tutorial support Module Assessment Methods of Assessment & associated

Neirotti, Juan Pablo

458

Approved Module Information for BH2239, 2014/5 Module Title/Name: Psychology and Work Module Code: BH2239  

E-Print Network (OSTI)

culture, climate, and change * Applying the Psychology of Work and Organizations The learning outcomes * Academic writing skills * Critical reasoning * Written and oral communication * Planning and organizing * Interpersonal discussion and communication Indicative Module Content: * Introduction to Work and Organizational

Neirotti, Juan Pablo

459

Cell signalling and phospholipid metabolism. Final report  

SciTech Connect

These studies explored whether phosphoinositide (PI) has a role in plants analogous to its role in animal cells. Although no parallel activity of PI in signal transduction was found in plant cells, activity of inositol phospholipid kinase was found to be modulated by light and by cell wall degrading enzymes. These studies indicate a major role for inositol phospholipids in plant growth and development as membrane effectors but not as a source of second messengers.

Boss, W.F.

1990-12-31T23:59:59.000Z

460

Microscale autonomous sensor and communications module  

DOE Patents (OSTI)

Various technologies pertaining to a microscale autonomous sensor and communications module are described herein. Such a module includes a sensor that generates a sensor signal that is indicative of an environmental parameter. An integrated circuit receives the sensor signal and generates an output signal based at least in part upon the sensor signal. An optical emitter receives the output signal and generates an optical signal as a function of the output signal. An energy storage device is configured to provide power to at least the integrated circuit and the optical emitter, and wherein the module has a relatively small diameter and thickness.

Okandan, Murat; Nielson, Gregory N

2014-03-25T23:59:59.000Z

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Amplitude modulation of wind turbine noise  

E-Print Network (OSTI)

Due to swish and thump amplitude modulation, the noise of wind turbines cause more annoyance than other environmental noise of the same average level. The wind shear accounts for the thump modulation (van den Berg effect). Making use of the wind speed measurements at the hub height, as well as at the top and the bottom of the rotor disc (Fig.1), the non-standard wind profile is applied. It causes variations in the A-weighted sound pressure level, LpA. The difference between the maximum and minimum of LpA characterizes thump modulation (Fig.2).

Makarewicz, Rufin

2013-01-01T23:59:59.000Z

462

RL-721 Document ID Number:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4 4 NEPA REVIEW SCREENING FORM DOE/CX-00075 I. Project Title: Project 1-718, Electrical Utili ties Transformer Management Support Facility II. Project Description and Location (including Time Period over which proposed action will occur and Project Dimensions -e.g., acres displaced/disturbed, excavation length/depth, area/location/number of buildings, etc.): The proposed action includes design, procurement, and construction of a pre-engineered metal building for transformer management; including inspections, routine maintenance, testing, refurbishing, and disposition of excess transformers. The building will be constructed in the previously disturbed, gravel-covered electrical utilities lay-down yard west of the 2101-M Building in 200 East Area of the Hanford Site. The building footprint

463

Particle Number & Particulate Mass Emissions Measurements on...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Number & Particulate Mass Emissions Measurements on a 'Euro VI' Heavy-duty Engine using the PMP Methodologies Particle Number & Particulate Mass Emissions Measurements on a 'Euro...

464

Alternative Fuels Data Center: Renewable Identification Numbers  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Renewable Renewable Identification Numbers to someone by E-mail Share Alternative Fuels Data Center: Renewable Identification Numbers on Facebook Tweet about Alternative Fuels Data Center: Renewable Identification Numbers on Twitter Bookmark Alternative Fuels Data Center: Renewable Identification Numbers on Google Bookmark Alternative Fuels Data Center: Renewable Identification Numbers on Delicious Rank Alternative Fuels Data Center: Renewable Identification Numbers on Digg Find More places to share Alternative Fuels Data Center: Renewable Identification Numbers on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Renewable Identification Numbers RIN Format EPA uses the following format to determine RINs for each physical gallon of

465

SHARP Physics Modules Updated | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Physics Modules Updated Physics Modules Updated SHARP Physics Modules Updated January 29, 2013 - 12:37pm Addthis PROTEUS Development The SHARP neutronics module, PROTEUS, includes neutron and gamma transport solvers, cross-section processing tools, and tools for depletion and fuel cycle analysis. Efforts in the second quarter focused on three major priorities: multi-physics integration, intermediate-fidelity tool development, and demonstrations of applicability. Integration of the second-order, discrete ordinates (Sn method) solver of PROTEUS with the latest version of the MOAB framework (which represents and evaluates mesh data) was initiated to enable its use for multi-physics analysis. With these updates, PROTEUS can obtain the mesh specification from the MOAB framework and store its data on the MOAB mesh representation so that MOAB

466

Photovoltaic module with removable wind deflector  

DOE Patents (OSTI)

A photovoltaic (PV) module assembly including a PV module, a deflector, and a clip. The PV module includes a PV device and a frame. A PV laminate is assembled to the frame, and the frame includes a support arm forming a seat. The deflector defines a front face and a rear face, with the clip extending from either the trailing frame member or the rear face of the deflector. In a mounted state, the deflector is nested within the seat and is releasably mounted to the trailing frame member via the clip. In some embodiments, the support arm forms a second seat, with the PV module assembly providing a second mounted state in which the deflector is in a differing orientation/slope, nested within the second seat and releasably mounted to the trailing frame member via the clip.

Botkin, Jonathan; Graves, Simon; Danning, Matt; Culligan, Matthew

2014-02-18T23:59:59.000Z

467

Photovoltaic Module Reliability Workshop 2013 | Department of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and PV Evolutions Impact and Detection of Pyranometer Failure on PV Performance, D.C. Jordan and B. Sekulic of NREL Manufacturing Metrology for c-Si Module ReliabilityDurability,...

468

Superieur lichtbereik dankzij dubbele LED module  

Science Journals Connector (OSTI)

GC Europe introduceert een nieuw concept voor lichtuitharding. De GC G-Light heeft een LED module met twee typen dioden. Met een...GC G-Light een hoge lichtopbrengst voor het uitharden van dental...

   

2005-08-01T23:59:59.000Z

469

Project Execution Plan Review Module (RM)  

Energy.gov (U.S. Department of Energy (DOE))

The Project Execution Plan (PEP) Review Module (RM) is a tool that assists DOE federal project review teams in evaluating the adequacy of the PEP development and maintenance for projects of any...

470

Rack assembly for mounting solar modules  

DOE Patents (OSTI)

A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures to be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

Plaisted, Joshua Reed; West, Brian

2012-09-04T23:59:59.000Z

471

Rack assembly for mounting solar modules  

DOE Patents (OSTI)

A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures o be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

Plaisted, Joshua Reed (Oakland, CA); West, Brian (San Francisco, CA)

2010-12-28T23:59:59.000Z

472

Rack assembly for mounting solar modules  

SciTech Connect

A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures o be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

Plaisted, Joshua Reed; West, Brian

2014-06-10T23:59:59.000Z

473

Laborlandschaft : redesigning the industrial laboratory module  

E-Print Network (OSTI)

This thesis proposes to redesign the industrial pharmaceutical laboratory typology by rethinking the composition of the laboratory module; the smallest functional sub-unit of the laboratory type. The design for this thesis ...

Farley, Alexander H. (Alexander Hamilton)

2014-01-01T23:59:59.000Z

474

Order Module--NNSA OCCUPATIONAL RADIATION PROTECTION  

Energy.gov (U.S. Department of Energy (DOE))

The familiar level of this module is designed to provide the basic information to meet the requirements that are related to 10 CFR 835, “Occupational Radiation Protection,” in the following DOE...

475

Order Module--RADIATION PROTECTION PROGRAMS GUIDE  

Energy.gov (U.S. Department of Energy (DOE))

The familiar level of this module is designed to provide the basic information related to DOEG 441.1-1C, Radiation Protection Programs Guide, as required in DOE-STD-1174-2003, Radiation Protection...

476

Optimal design of reverse osmosis module networks  

SciTech Connect

The structure of individual reverse osmosis modules, the configuration of the module network, and the operating conditions were optimized for seawater and brackish water desalination. The system model included simple mathematical equations to predict the performance of the reverse osmosis modules. The optimization problem was formulated as a constrained multivariable nonlinear optimization. The objective function was the annual profit for the system, consisting of the profit obtained from the permeate, capital cost for the process units, and operating costs associated with energy consumption and maintenance. Optimization of several dual-stage reverse osmosis systems were investigated and compared. It was found that optimal network designs are the ones that produce the most permeate. It may be possible to achieve economic improvements by refining current membrane module designs and their operating pressures.

Maskan, F.; Wiley, D.E.; Johnston, L.P.M.; Clements, D.J.

2000-05-01T23:59:59.000Z

477

A qualitative examination of performance and energy yield of photovoltaic modules in southern Norway  

Science Journals Connector (OSTI)

Three different, commercially available photovoltaic modules have been monitored outdoors in the town of Grimstad, Norway. The present paper describes the experimental setup that was implemented, in particular details of the low-cost electronic loads. Results compare measured performance with manufacturer's data, and temperature measurements enable a comparison with performance at standard test condition temperature. Overall, the monocrystalline module performed best both regarding maximum efficiency and overall energy production, whereas the module based on triple junction amorphous silicon technology had the worst performance considering these criteria. The gross numbers of energy yield corresponding to measurements over a whole year show that photovoltaic technology could become a viable alternative also in a Northern country like Norway.

Ole-Morten Midtgard; Tor Oskar Sætre; Georgi Yordanov; Anne Gerd Imenes; Chee Lim Nge

2010-01-01T23:59:59.000Z

478

Neuro-fuzzy-based space vector modulation for THD reduction in VSI fed induction motor drive  

Science Journals Connector (OSTI)

Space vector modulation is an optimal pulse width modulation technique for variable speed drive application. This paper proposes adaptive neuro-fuzzy inference system (ANFIS) based space vector modulation (SVM) technique for voltage source inverter. The proposed ANFIS network is independent of the switching frequency and uses hybrid learning algorithm for training. Due to this learning algorithm, SVM algorithm can be implemented very fast and the desired training error can be obtained with less number of iterations compared to other optimisation techniques like neural, fuzzy and genetic. The performance of ANFIS controlled drive is compared with the conventional SVM-based drive. The simulation results of inverter phase voltages obtained are verified experimentally using a Dspace kit (DS1104). The % THD value of simulation and experimental waveforms of inverter phase voltages for 3 kHz switching frequency is presented.

G. Durgasukumar; Mukesh Kumar Pathak

2012-01-01T23:59:59.000Z

479

Algebraic Characters for Harish-Chandra modules  

E-Print Network (OSTI)

We give a purely cohomological treatment of a character theory for (g,K)-modules. This leads to a beautiful formalism extending to large categories of (g,K)-modules. Due to results of Hecht-Schmid and Vogan the classical results of Harish-Chandra's global character theory extend to this setting. This algebraic approach reduces (not necessarily admissible) discretely decomposable branching problems to finiteness statements about multiplicities of composition factors and appropriate character formulas.

Januszewski, Fabian

2012-01-01T23:59:59.000Z

480

High-throughput manufacturing of thin-film CdTe photovoltaic modules  

Science Journals Connector (OSTI)

The main obstacle to the wide spread use of photovoltaics as a major source of renewable energy has been cost. The key to lowering the cost of photovoltaic generated energy to the levels of conventional sources of energy lays in the development of low cost high throughput manufacturing processes. Solar Cells Inc. (SCI) believes this can be achieved for CdTe based modules by integrating its PV fabrication processes with a modern glass plant. That is sand in finished module out. It is also necessary to have a stable end product in order to gain wide acceptance. SCI has been working at producing large-area CdS/CdTe photovoltaic (PV) modules and the processes developed at SCI can be scaled to achieve high production levels at cost-effective rates.

Alan McMaster; Steve Johnson

1999-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "modules cells number" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

A solar array module fabrication process for HALE solar electric UAVs  

SciTech Connect

We describe a fabrication process to manufacture high power to weight ratio flexible solar array modules for use on high altitude long endurance (HALE) solar electric unmanned air vehicles (UAVs). A span-loaded flying wing vehicle, known as the RAPTOR Pathfinder, is being employed as a flying test bed to expand the envelope of solar powered flight to high altitudes. It requires multiple light weight flexible solar array modules able to endure adverse environmental conditions. At high altitudes the solar UV flux is significantly enhanced relative to sea level, and extreme thermal variations occur. Our process involves first electrically interconnecting solar cells into an array followed by laminating them between top and bottom laminated layers into a solar array module. After careful evaluation of candidate polymers, fluoropolymer materials have been selected as the array laminate layers because of their inherent abilities to withstand the hostile conditions imposed by the environment.

Carey, P.G.; Aceves, R.C.; Colella, N.J.; Thompson, J.B.; Williams, K.A.

1993-12-01T23:59:59.000Z

482

Commissioning of intensity modulated neutron radiotherapy (IMNRT)  

SciTech Connect

Purpose: Intensity modulated neutron radiotherapy (IMNRT) has been developed using inhouse treatment planning and delivery systems at the Karmanos Cancer Center/Wayne State University Fast Neutron Therapy facility. The process of commissioning IMNRT for clinical use is presented here. Results of commissioning tests are provided including validation measurements using representative patient plans as well as those from the TG-119 test suite. Methods: IMNRT plans were created using the Varian Eclipse optimization algorithm and an inhouse planning system for calculation of neutron dose distributions. Tissue equivalent ionization chambers and an ionization chamber array were used for point dose and planar dose distribution comparisons with calculated values. Validation plans were delivered to water and virtual water phantoms using TG-119 measurement points and evaluation techniques. Photon and neutron doses were evaluated both inside and outside the target volume for a typical IMNRT plan to determine effects of intensity modulation on the photon dose component. Monitor unit linearity and effects of beam current and gantry angle on output were investigated, and an independent validation of neutron dosimetry was obtained. Results: While IMNRT plan quality is superior to conventional fast neutron therapy plans for clinical sites such as prostate and head and neck, it is inferior to photon IMRT for most TG-119 planning goals, particularly for complex cases. This results significantly from current limitations on the number of segments. Measured and calculated doses for 11 representative plans (six prostate/five head and neck) agreed to within -0.8 {+-} 1.4% and 5.0 {+-} 6.0% within and outside the target, respectively. Nearly all (22/24) ion chamber point measurements in the two phantom arrangements were within the respective confidence intervals for the quantity [(measured-planned)/prescription dose] derived in TG-119. Mean differences for all measurements were 0.5% (max = 7.0%) and 1.4% (max = 4.1%) in water and virtual water, respectively. The mean gamma pass rate for all cases was 92.8% (min = 88.6%). These pass rates are lower than typically achieved with photon IMRT, warranting development of a planar dosimetry system designed specifically for IMNRT and/or the improvement of neutron beam modeling in the penumbral region. The fractional photon dose component did not change significantly in a typical IMNRT plan versus a conventional fast neutron therapy plan, and IMNRT delivery is not expected to significantly alter the RBE. All other commissioning results were considered satisfactory for clinical implementation of IMNRT, including the external neutron dose validation, which agreed with the predicted neutron dose to within 1%. Conclusions: IMNRT has been successfully commissioned for clinical use. While current plan quality is inferior to photon IMRT, it is superior to conventional fast neutron therapy. Ion chamber validation results for IMNRT commissioning are also comparable to those typically achieved with photon IMRT. Gamma pass rates for planar dose distributions are lower than typically observed for photon IMRT but may be improved with improved planar dosimetry equipment and beam modeling techniques. In the meantime, patient-specific quality assurance measurements should rely more heavily on point dose measurements with tissue equivalent ionization chambers. No significant technical impediments are anticipated in the clinical implementation of IMNRT as described here.

Burmeister, Jay; Snyder, Michael [Karmanos Cancer Center, Wayne State University School of Medicine, Detroit, Michigan 48201 (United States); Spink, Robyn; Liang Liang; Bossenberger, Todd; Halford, Robert [Karmanos Cancer Center, Detroit, Michigan 48201 (United States); Brandon, John [Michigan State University, East Lansing, Michigan 48201 (United States); Delauter, Jonathan [Wayne State University School of Medicine, Detroit, Michigan 48201 (United States)

2013-02-15T23:59:59.000Z

483

Verification Challenges at Low Numbers  

SciTech Connect

Many papers have dealt with the political difficulties and ramifications of deep nuclear arms reductions, and the issues of “Going to Zero”. Political issues include extended deterrence, conventional weapons, ballistic missile defense, and regional and geo-political security issues. At each step on the road to low numbers, the verification required to ensure compliance of all parties will increase significantly. Looking post New START, the next step will likely include warhead limits in the neighborhood of 1000 . Further reductions will include stepping stones at1000 warheads, 100’s of warheads, and then 10’s of warheads before final elimination could be considered of the last few remaining warheads and weapons. This paper will focus on these three threshold reduction levels, 1000, 100’s, 10’s. For each, the issues and challenges will be discussed, potential solutions will be identified, and the verification technologies and chain of custody measures that address these solutions will be surveyed. It is important to note that many of the issues that need to be addressed have no current solution. In these cases, the paper will explore new or novel technologies that could be applied. These technologies will draw from the research and development that is ongoing throughout the national laboratory complex, and will look at technologies utilized in other areas of industry for their application to arms control verification.

Benz, Jacob M.; Booker, Paul M.; McDonald, Benjamin S.

2013-06-01T23:59:59.000Z

484

Betti numbers, Morse theory, and homology Perturbations  

E-Print Network (OSTI)

Betti numbers, Morse theory, and homology Perturbations Cascades Multicomplexes Morse and Morse Hurtubise Morse and Morse-Bott Homology #12;Betti numbers, Morse theory, and homology Perturbations Cascades Multicomplexes Betti numbers, Morse theory, and homology Betti numbers Morse inequalities Transversality Morse

Hurtubise, David E.

485

DOE special projects: PLACE3S GIS MODULE [Final report  

SciTech Connect

PLACE3S (PLAnning for Community Energy, Economic and Environmental Sustainability) energy option matching module.

NONE

2002-07-31T23:59:59.000Z

486

Contractive and completely contractive modules, matricial tangent vectors  

E-Print Network (OSTI)

Contractive and completely contractive modules, matricial tangent vectors and distance decreasing a finite dimensional Hilbert module over H() and that the module is contractive if and only if C, (v tensor product norm then again the module is contractive if and only if V is less or equal to one

Misra, Gadadhar

487

h-analogue of Fibonacci Numbers  

E-Print Network (OSTI)

In this paper, we introduce the h-analogue of Fibonacci numbers for non-commutative h-plane. For h h'= 1 and h = 0, these are just the usual Fibonacci numbers as it should be. We also derive a collection of identities for these numbers. Furthermore, h-Binet's formula for the h-Fibonacci numbers is found and the generating function that generates these numbers is obtained.

H. B. Benaoum

2009-09-30T23:59:59.000Z

488

High speed flow cytometric separation of viable cells  

DOE Patents (OSTI)

Hematopoietic cell populations are separated to provide cell sets and subsets as viable cells with high purity and high yields, based on the number of original cells present in the mixture. High-speed flow cytometry is employed using light characteristics of the cells to separate the cells, where high flow speeds are used to reduce the sorting time.

Sasaki, D.T.; Van den Engh, G.J.; Buckie, A.M.

1995-11-14T23:59:59.000Z

489

High speed flow cytometric separation of viable cells  

DOE Patents (OSTI)

Hematopoietic cell populations are separated to provide cell sets and subsets as viable cells with high purity and high yields, based on the number of original cells present in the mixture. High-speed flow cytometry is employed using light characteristics of the cells to separate the cells, where high flow speeds are used to reduce the sorting time.

Sasaki, Dennis T. (Mountain View, CA); Van den Engh, Gerrit J. (Seattle, WA); Buckie, Anne-Marie (Margate, GB)

1995-01-01T23:59:59.000Z

490

Pooled Analysis of Mitochondrial DNA Copy Number and Lung Cancer Risk in Three Prospective Studies  

Science Journals Connector (OSTI)

...AACR. Introduction Mitochondria are primarily responsible for energy production in eukaryotic cells (1). Mitochondria have a singular...molecule. Mitochondria copy number (mtDNA CN) varies to meet energy needs and cope with oxidative stress (2). Oxidative stress...

Christopher Kim; Bryan A. Bassig; Wei Jie Seow; Wei Hu; Mark P. Purdue; Xiao-Ou Shu; Wen-Yi Huang; Chin-San Liu; Wen-Ling Cheng; Ta-Tsung Lin; Yong-Bing Xiang; Bu-Tian Ji; Yu-Tang Gao; Wong-Ho Chow; Satu Männistö; Stephanie J. Weinstein; Demetrius Albanes; Wei Zheng; H. Dean Hosgood; Unhee Lim; Nathaniel Rothman; Qing Lan

2014-12-01T23:59:59.000Z

491

Awards Received in October 2006 Principal Investigator Department Sponsor Project Title Amount GCO OSP Number  

E-Print Network (OSTI)

OSP Number ABRUNA, HECTOR D DISALVO, FRANCIS J CCMR DOE AN ADVANCED MATERIALS APPROACH TO FUEL CELL RESEARCH PROJECT $33,025 THF 52476 BELL, JAMES F CRSR NASA (GODDARD SFC) COMPOSITION AND WEATHERING HISTORY

Danforth, Bryan Nicholas

492

Department for Analysis and Computational Number Theory Additive functions and number systems  

E-Print Network (OSTI)

Department for Analysis and Computational Number Theory Additive functions and number systems systems April 7, 2010 1 / 35 #12;Department for Analysis and Computational Number Theory Outline Number #12;Department for Analysis and Computational Number Theory Examples for number systems b Z, b -2

493

Microsoft PowerPoint - FinalModule3.ppt  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3: Project Scheduling 3: Project Scheduling Prepared by: Module 3 - Project Scheduling 1 Prepared by: Booz Allen Hamilton Module 3: Project Scheduling Welcome to Module 3. The objective of this module is to introduce you to Project Scheduling. The Topics that will be addressed in this Module include: * Define Planning vs. Scheduling * Define and Illustrate Basic Scheduling Concepts * Define Logic Relationships and Critical Path * Define and Illustrate Different Schedule Formats Module 3 - Project Scheduling 2 Prepared by: Booz Allen Hamilton Review of Previous Modules Let's quickly review what has been covered in the previous modules. * In Module 1 we introduced you to earned value and the requirements for properly implementing an earned value management system (EVMS). * In Module 2 we discussed

494

Microsoft PowerPoint - FinalModule8.ppt  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8: Reporting 8: Reporting Prepared by: Module 8 - Reporting 1 Prepared by: Booz Allen Hamilton Module 8: Government Required Reports Welcome to Module 8. The objective of this module is to introduce you to Government required reports. The Topics that will be addressed in this Module include: * Define Cost Performance Report (CPR) * Define Cost/Schedule Status Report (C/SSR) Module 8 - Reporting 2 Prepared by: Booz Allen Hamilton Review of Previous Modules In the previous seven modules, we discussed the framework needed to perform Earned Value and develop an Earned Value Management System (EVMS). * In Module 1 we introduced you to earned value and the requirements for properly implementing an earned value management system (EVMS) * In Module 2 we discussed the development of the work breakdown structure

495

Application of the NREL Test-to-Failure Protocol for PV Modules  

SciTech Connect

Initial results of application of the NREL Test-to-Failure Protocol are presented and discussed. Six commercially available multicrystalline Si-cell flat-plate modules were subjected to the protocol with controls. The samples were divided among three test sequences, (1) 1000 hours of 85C/85% relative humidity with positive or negative 600 V bias to the active layers with respect to the grounded frame, (2) -40/85C thermal cycling with electrical load at the rated module power, and (3) an alternating sequence between tests (1) and (2). Application of the protocol manifested in the acceleration of degradation mechanisms seen in the field including backsheet delamination, corrosion, bubble formation within the laminate, discoloration of the antireflective coating, and localized heating with degradation of the backsheet as a result of moisture ingress, corrosion, and concentrated current flow. Significant differences in performance after one round of the protocol are seen in damp heat depending on the polarity of the bias applied to the active layer (the short-circuited power leads of the module). The protocol is found to successfully accelerate module degradation mechanisms that have been observed in the field and will help to differentiate the performance and reliability of various module technologies.

Hacke, P.; Osterwald, C.; Trudell, D.; Terwilliger, K.; Bosco, N.; Oelak, E.; Kurtz, S.

2011-02-01T23:59:59.000Z

496

Fusion rules and complete reducibility of certain modules for affine Lie algebras  

E-Print Network (OSTI)

We develop a new method for obtaining branching rules for affine Kac-Moody Lie algebras at negative integer levels. This method uses fusion rules for vertex operator algebras of affine type. We prove that an infinite family of ordinary modules for affine vertex algebra of type A investigated in Adamovi\\'c and O. Per\\v{s}e (2008) is closed under fusion. Then we apply these fusion rules on explicit bosonic realization of level -1 modules for the affine Lie algebra of type $A_{\\ell-1}^{(1)}$, obtain a new proof of complete reducibility for these representations, and the corresponding decomposition for $\\ell \\ge 3$. We also obtain the complete reducibility of the associated level -1 modules for affine Lie algebra of type $C_{\\ell}^{(1)}$. Next we notice that the category of $D_{2 \\ell -1}^{(1)}$ modules at level $- 2 \\ell +3 $ obtained in Per\\v{s}e (2012) has the isomorphic fusion algebra. This enables us to decompose certain $E_6 ^{(1)}$ and $F_4 ^{(1)}$--modules at negative levels.

Drazen Adamovic; Ozren Perse

2012-07-31T23:59:59.000Z

497

Engineering the Electronic Band Structure for Multiband Solar Cells  

E-Print Network (OSTI)

Band Structure for Multiband Solar Cells N. López 1 , L. A.a number of new concepts of solar cells have been proposed.successful approach several solar cells using semiconductors

Lopez, N.

2011-01-01T23:59:59.000Z

498

A high efficiency photovoltaic module integrated converter with the asymmetrical half-bridge flyback converter  

SciTech Connect

A module integrated converter (MIC) for a photovoltaic (PV) cell is important part of power conditioning system (PCS). It performs maximum power point tracking of a PV cell to generate the power as much as possible from solar energy. There are several methods for connection between the PV modules and the MICs. In order to avoid partial shading effects, converter-per-module approach was proposed. The MIC that performs maximum power point tracking (MPPT), if it is low efficiency, is no use. The MIC whose output is connected to the output of PV module was proposed for high efficiency. However, there are some problems. In this study, an asymmetrical half-bridge flyback converter is proposed instead of the original flyback converter with same method to solve the problems. The proposed MIC was built to verify the performance. The new topology using soft switching technique showed good performance for the efficiency. At the higher power, the efficiency of the proposed converter is higher than existing converter. (author)

Kim, Heeje; Kim, Jongrak; Shin, Dongsul [Department of Electrical Engineering, Pusan National University, Jangjeon, Geumjeong, Busan 609-735 (Korea); Kim, Hosung; Lee, Kyungjun [Department of Electrical Engineering, Pusan National University, Jangjeon, Geumjeong, Busan 609-735 (Korea); New and Renewable Energy System Research Center, Korea Electro-technology Research Institute, 28-1, Sungju-dong Changwon-si, Kyungsannam-do, 641-120 (Korea); Kim, Jonghyun; Yoo, Dongwook [New and Renewable Energy System Research Center, Korea Electro-technology Research Institute, 28-1, Sungju-dong Changwon-si, Kyungsannam-do, 641-120 (Korea)

2010-08-15T23:59:59.000Z

499

Assumptions to the Annual Energy Outlook 2000 - Petroleum Market Module  

Gasoline and Diesel Fuel Update (EIA)

Petroleum Market Module (PMM) forecasts petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil (both domestic and imported), petroleum product imports, other refinery inputs including alcohol and ethers, natural gas plant liquids production, and refinery processing gain. In addition, the PMM estimates capacity expansion and fuel consumption of domestic refineries. Petroleum Market Module (PMM) forecasts petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil (both domestic and imported), petroleum product imports, other refinery inputs including alcohol and ethers, natural gas plant liquids production, and refinery processing gain. In addition, the PMM estimates capacity expansion and fuel consumption of domestic refineries. The PMM contains a linear programming representation of refining activities in three U.S. regions. This representation provides the marginal costs of production for a number of traditional and new petroleum products. The linear programming results are used to determine end-use product prices for each Census Division using the assumptions and methods described below.100

500

[Gas cooled fuel cell systems technology development program  

SciTech Connect

Objective is the development of a gas-cooled phosphoric acid fuel cell for electric utility power plant application. Primary objectives are to: demonstrate performance endurance in 10-cell stacks at 70 psia, 190 C, and 267 mA/cm[sup 2]; improve cell degradation rate to less than 8 mV/1000 hours; develop cost effective criteria, processes, and design configurations for stack components; design multiple stack unit and a single 100 kW fuel cell stack; design a 375 kW fuel cell module and demonstrate average cell beginning-of-use performance; manufacture four 375-kW fuel cell modules and establish characteristics of 1.5 MW pilot power plant. The work is broken into program management, systems engineering, fuel cell development and test, facilities development.

Not Available

1988-03-01T23:59:59.000Z