Sample records for module regions source

  1. Alternative Energy Sources -- An Interdisciplinary Module for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Alternative Energy Sources -- An Interdisciplinary Module for Energy Education Alternative Energy Sources -- An Interdisciplinary Module for Energy Education Find activities...

  2. Alternative Energy Sources - An Interdisciplinary Module for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Sources - An Interdisciplinary Module for Energy Education Alternative Energy Sources - An Interdisciplinary Module for Energy Education Below is information about the...

  3. Alternative Energy Sources -- An Interdisciplinary Module for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Sources - An Interdisciplinary Module for Energy Education Grades: 5-8 Topic: Energy Basics, Wind Energy, Solar Owner: Earth Science Department at the University of Northern...

  4. Modulating the Neutron Flux from a Mirror Neutron Source

    SciTech Connect (OSTI)

    Ryutov, D D

    2011-09-01T23:59:59.000Z

    A 14-MeV neutron source based on a Gas-Dynamic Trap will provide a high flux of 14 MeV neutrons for fusion materials and sub-component testing. In addition to its main goal, the source has potential applications in condensed matter physics and biophysics. In this report, the author considers adding one more capability to the GDT-based neutron source, the modulation of the neutron flux with a desired frequency. The modulation may be an enabling tool for the assessment of the role of non-steady-state effects in fusion devices as well as for high-precision, low-signal basic science experiments favoring the use of the synchronous detection technique. A conclusion is drawn that modulation frequency of up to 1 kHz and modulation amplitude of a few percent is achievable. Limitations on the amplitude of modulations at higher frequencies are discussed.

  5. Blind source separation of convolutive mixtures of non circular linearly modulated signals with unknown baud

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Blind source separation of convolutive mixtures of non circular linearly modulated signals addresses the problem of blind separation of convolutive mix- tures of BPSK and circular linearly modulated theoretical statements. Keywords: Blind source separation, Convolutive mixture, Constant Modulus Algorithm

  6. Tracing meteorite source regions through asteroid spectroscopy

    E-Print Network [OSTI]

    Thomas, Cristina Ana

    2009-01-01T23:59:59.000Z

    By virtue of their landing on Earth, meteorites reside in near-Earth object (NEO) orbits prior to their arrival. Thus the population of observable NEOs, in principle, give the best representation of meteorite source bodies. ...

  7. An ion source module for the Beijing Radioactive Ion-beam Facility

    SciTech Connect (OSTI)

    Cui, B., E-mail: cui@ciae.ac.cn; Huang, Q.; Tang, B.; Ma, R.; Chen, L.; Ma, Y. [China Institute of Atomic Energy, Beijing (China)] [China Institute of Atomic Energy, Beijing (China)

    2014-02-15T23:59:59.000Z

    An ion source module is developed for Beijing Radioactive Ion-beam Facility. The ion source module is designed to meet the requirements of remote handling. The connection and disconnection of the electricity, cooling and vacuum between the module and peripheral units can be executed without on-site manual work. The primary test of the target ion source has been carried out and a Li{sup +} beam has been extracted. Details of the ion source module and its primary test results are described.

  8. alamos source region: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    activity of Sgr A* in the past. E. Churazov; M. Gilfanov; R. Sunyaev; S. Kuznetsov 1999-01-13 17 An Optical Source Catalog of the North Ecliptic Pole Region Astrophysics...

  9. Module No: 410315Labor LawModule Title: Co-requisite:Sources of ObligationPre-requisite

    E-Print Network [OSTI]

    Academic rank Instructor Name E-mailOffice Number Office Phone Academic rank Module coordinator Assistant and composing articles, reports and research papers along with using sources of knowledge Learning Outcomes which to benefit C/3 compose research papers, articles and reports in compliance with a legal scheme

  10. Evaluation of Maxim Module-Integrated Electronics at the DOE Regional Test Centers (Presentation)

    SciTech Connect (OSTI)

    Deline, C.; Sekulic, B.; Barkaszi, S.; Yang, J.; Kahn, S.

    2014-06-01T23:59:59.000Z

    Module-embedded power electronics developed by Maxim Integrated are under evaluation through a partnership with the Department of Energy's Regional Test Center (RTC) program. Field deployments of both conventional modules and electronics-enhanced modules are designed to quantify the performance advantage of Maxim's products under different amounts of interrow shading, and their ability to be deployed at a greater ground-coverage ratio than conventional modules. Simulations in PVSYST have quantified the predicted performance difference between conventional modules and Maxim's modules from interrow shading. Initial performance results have identified diffuse irradiance losses at tighter row spacing for both the Maxim and conventional modules. Comparisons with published models show good agreement with models predicting the greatest diffuse irradiance losses. At tighter row spacing, all of the strings equipped with embedded power electronics outperformed their conventional peers. An even greater performance advantage is predicted to occur in the winter months when the amount of interrow shading mismatch is at a maximum.

  11. Testing a scale pulsed modulator for an IEC neutron source into a resistive load

    SciTech Connect (OSTI)

    Dale, Gregory E [Los Alamos National Laboratory; Wheat, Robert M [Los Alamos National Laboratory; Aragonez, Robert [Los Alamos National Laboratory

    2009-01-01T23:59:59.000Z

    A 1/10th scaled prototype pulse modulator for an Inertial Electrostatic Confinement (IEC) neutron source has been designed and tested at Los Alamos National Laboratory (LANL). The scaled prototype modulator is based on a solid-state Marx architecture and has an output voltage of 13 kV and an output current of 10 A. The modulator has a variable pulse width between 50 {micro}s and 1 ms with < 5% droop at all pulse widths. The modulator operates with a duty factor up to 5% and has a maximum pulse repetition frequency of 1 kHz. The use of a solid-state Marx modulator in this application has several potential benefits. These benefits include variable pulse width and amplitude, inherent switch overcurrent and transient overvoltage protection, and increased efficiency over DC supplies used in this application. Several new features were incorporated into this design including inductorless charging, fully snubberless operation, and stage fusing. The scaled prototype modulator has been tested using a 1 k{Omega} resistive load. Test results are given. Short (50 {micro}s) and long (1 ms) pulses are demonstrated as well as high duty factor operation (1 kHz rep rate at a 50 {micro}s pulse width for a 5% duty factor). Pulse agility of the modulator is demonstrated through turning the individual Marx stages on and off in sequence producing ramp, pyramid, and reverse pyramid waveforms.

  12. Evaluation of Maxim Module-Integrated Electronics at the DOE Regional Test Centers: Preprint

    SciTech Connect (OSTI)

    Deline, C.; Sekulic, B.; Stein, J.; Barkaszi, S.; Yang, J.; Kahn, S.

    2014-07-01T23:59:59.000Z

    Module-embedded power electronics developed by Maxim Integrated are under evaluation through a partnership with the Department of Energy's Regional Test Center (RTC) program. Field deployments of both conventional modules and electronics-enhanced modules are designed to quantify the performance advantage of Maxim's products under different amounts of inter-row shading, and their ability to be deployed at a greater ground-coverage-ratio than conventional modules. Simulations in PVSYST have quantified the predicted performance difference between conventional modules and Maxim's modules from inter-row shading. Initial performance results have identified diffuse irradiance losses at tighter row spacing for both the Maxim and conventional modules. Comparisons with published models show good agreement with models predicting the greatest diffuse irradiance losses. At tighter row spacing, all of the strings equipped with embedded power electronics outperformed their conventional peers. An even greater performance advantage is predicted to occur in the winter months when the amount of inter-row shading mismatch is at a maximum.

  13. CLIMATIC MODULATION OF SOURCE, RESERVOIR AND SEAL FACIES ALONG THE ZONAL CLIMATIC GRADIENT OF PANGEA

    E-Print Network [OSTI]

    Olsen, Paul E.

    reservoir and seal combinations. Fundy-type sequences tend to have no or few organic-rich shales and have#12;CLIMATIC MODULATION OF SOURCE, RESERVOIR AND SEAL FACIES ALONG THE ZONAL CLIMATIC GRADIENT with new paleomagnetic data from the Newark basin of Eastern North America and the predictions of recent

  14. Control of high power IGBT modules in the active region for fast pulsed power converters

    E-Print Network [OSTI]

    Cravero, JM; Garcia Retegui, R; Maestri, S; Uicich, G

    2014-01-01T23:59:59.000Z

    At CERN, fast pulsed power converters are used to supply trapezoidal current in different magnet loads. These converters perform output current regulation by using a high power IGBT module in its ohmic region. This paper presents a new strategy for pulsed current control applications using a specifically designed IGBT driver.

  15. MARINE STRATUS CLOUD LIFECYCLE MODULATED BY LATENT HEAT FLUX IN A COASTAL OCEAN UPWELLING REGION

    E-Print Network [OSTI]

    MARINE STRATUS CLOUD LIFECYCLE MODULATED BY LATENT HEAT FLUX IN A COASTAL OCEAN UPWELLING REGION, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark

  16. Injection of a Phase Modulated Source into the Z-Beamlet Laser for Increased Energy Extraction.

    SciTech Connect (OSTI)

    Rambo, Patrick K.; Armstrong, Darrell J.; Schwarz, Jens; Smith, Ian C; Shores, Jonathon; Speas, Christopher; Porter, John L.

    2014-11-01T23:59:59.000Z

    The Z-Beamlet laser has been operating at Sandia National Laboratories since 2001 to provide a source of laser-generated x-rays for radiography of events on the Z-Accelerator. Changes in desired operational scope have necessitated the increase in pulse duration and energy available from the laser system. This is enabled via the addition of a phase modulated seed laser as an alternative front-end. The practical aspects of deployment are discussed here.

  17. Performance Characteristics Of An Intensity Modulated Advanced X-Ray Source (IMAXS) For Homeland Security Applications

    SciTech Connect (OSTI)

    Langeveld, Willem G. J.; Brown, Craig; Condron, Cathie; Ingle, Mike [Rapiscan Laboratories, Inc., 520 Almanor Ave., Sunnyvale, CA 94085 (United States); Christensen, Phil A.; Johnson, William A.; Owen, Roger D. [HESCO/PTSE Inc., 2501 Monarch St., Alameda, CA 94501 (United States); Hernandez, Michael; Schonberg, Russell G. [XScell Corp., 2134 Old Middlefield Way, Mountain View, CA 94043 (United States); Ross, Randy [Stangenes Industries, Inc., 1052 East Meadow Circle, Palo Alto, CA 94303 (United States)

    2011-06-01T23:59:59.000Z

    X-ray cargo inspection systems for the detection and verification of threats and contraband must address stringent, competitive performance requirements. High x-ray intensity is needed to penetrate dense cargo, while low intensity is desirable to minimize the radiation footprint, i.e. the size of the controlled area, required shielding and the dose to personnel. In a collaborative effort between HESCO/PTSE Inc., XScell Corp., Stangenes Industries, Inc. and Rapiscan Laboratories, Inc., an Intensity Modulated Advanced X-ray Source (IMAXS) was designed and produced. Cargo inspection systems utilizing such a source have been projected to achieve up to 2 inches steel-equivalent greater penetration capability, while on average producing the same or smaller radiation footprint as present fixed-intensity sources. Alternatively, the design can be used to obtain the same penetration capability as with conventional sources, but reducing the radiation footprint by about a factor of three. The key idea is to anticipate the needed intensity for each x-ray pulse by evaluating signal strength in the cargo inspection system detector array for the previous pulse. The IMAXS is therefore capable of changing intensity from one pulse to the next by an electronic signal provided by electronics inside the cargo inspection system detector array, which determine the required source intensity for the next pulse. We report on the completion of a 9 MV S-band (2998 MHz) IMAXS source and comment on its performance.

  18. Aerosol acidity in rural New England: Temporal trends and source region analysis

    E-Print Network [OSTI]

    Fischer, Emily V.

    the dissociation of sulfuric acid (H2SO4) that condenses after forming via the gas phase oxidation of sulfurAerosol acidity in rural New England: Temporal trends and source region analysis L. D. Ziemba,1,2 E. Talbot (2007), Aerosol acidity in rural New England: Temporal trends and source region analysis, J

  19. Design, status and first operations of the spallation neutron source polyphase resonant converter modulator system

    SciTech Connect (OSTI)

    Reass, W. A. (William A.); Apgar, S. E. (Sean E.); Baca, D. M. (David M.); Doss, James D.; Gonzales, J. (Jacqueline); Gribble, R. F. (Robert F.); Hardek, T. W. (Thomas W.); Lynch, M. T. (Michael T.); Rees, D. E. (Daniel E.); Tallerico, P. J. (Paul J.); Trujillo, P. B. (Pete B.); Anderson, D. E. (David E.); Heidenreich, D. A. (Dale A.); Hicks, J. D. (Jim D.); Leontiev, V. N.

    2003-01-01T23:59:59.000Z

    The Spallation Neutron Source (SNS) is a new 1.4 MW average power beam, 1 GeV accelerator being built at Oak Ridge National Laboratory. The accelerator requires 15 converter-modulator stations each providing between 9 and 11 MW pulses with up to a 1 .I MW average power. The converter-modulator can be described as a resonant 20 kHz polyphase boost inverter. Each converter modulator derives its buss voltage from a standard substation cast-core transformer. Each substation is followed by an SCR pre-regulator to accommodate voltage changes from no load to full load, in addition to providing a soft-start function. Energy storage is provided by self-clearing metallized hazy polypropylene traction capacitors. These capacitors do not fail short, but clear any internal anomaly. Three 'H-Bridge' IGBT transistor networks are used to generate the polyphase 20 kHz transformer primary drive waveforms. The 20 kHz drive waveforms are time-gated to generate the desired klystron pulse width. Pulse width modulation of the individual 20 lcHz pulses is utilized to provide regulated output waveforms with DSP based adaptive feedforward and feedback techniques. The boost transformer design utilizes nanocrystalline alloy that provides low core loss at design flux levels and switching frequencies. Capacitors are used on the transformer secondary networks to resonate the leakage inductance. The transformers are wound for a specific leakage inductance, not turns ratio. This design technique generates multiple secondary volts per turn as compared to the primary. With the appropriate tuning conditions, switching losses are minimized. The resonant topology has the added benefit of being deQed in a klystron fault condition, with little energy deposited in the arc. This obviates the need of crowbars or other related networks. A review of these design parameters, operational performance, production status, and OWL installation and performance to date will be presented.

  20. Development of an Air-Source Heat Pump Integrated with a Water Heating / Dehumidification Module

    SciTech Connect (OSTI)

    Rice, C Keith [ORNL] [ORNL; Uselton, Robert B. [Lennox Industries, Inc] [Lennox Industries, Inc; Shen, Bo [ORNL] [ORNL; Baxter, Van D [ORNL] [ORNL; Shrestha, Som S [ORNL] [ORNL

    2014-01-01T23:59:59.000Z

    A residential-sized dual air-source integrated heat pump (AS-IHP) concept is under development in partnership between ORNL and a manufacturer. The concept design consists of a two-stage air-source heat pump (ASHP) coupled on the air distribution side with a separate novel water heating/dehumidification (WH/DH) module. The motivation for this unusual equipment combination is the forecast trend for home sensible loads to be reduced more than latent loads. Integration of water heating with a space dehumidification cycle addresses humidity control while performing double-duty. This approach can be applied to retrofit/upgrade applications as well as new construction. A WH/DH module capable of ~1.47 L/h water removal and ~2 kW water heating capacity was assembled by the manufacturer. A heat pump system model was used to guide the controls design; lab testing was conducted and used to calibrate the models. Performance maps were generated and used in a TRNSYS sub-hourly simulation to predict annual performance in a well-insulated house. Annual HVAC/WH energy savings of ~35% are predicted in cold and hot-humid U.S. climates compared to a minimum efficiency baseline.

  1. Module No: 410111Introduction to LawModule Title: Co-requisite: Sources of obligation, intro to

    E-Print Network [OSTI]

    Time Programme of Study: Daytime & Evening Study E-mailOffice Number Office Phone Academic rank Instructor Name E-mailOffice Number Office Phone Academic rank Module coordinator 306209lecturerManal Abdu. developing as well as enhancing students abilities to write and prepare articles, reports and research papers

  2. Source contributions at regional distances. Final report, 9 Aug 88-31 May 91

    SciTech Connect (OSTI)

    Koch, K.; Soroka, W.; Stump, B.

    1991-05-14T23:59:59.000Z

    In order to quantify the effects of different components of the explosion source function on far regional seismograms (900-2000km) a one-dimensional velocity model is developed for seismic waves traveling across the Basin and Range. This model is constrained by broadband data recorded at the Lajitas seismic station. Complete synthetic seismograms are developed for the model utilizing the extended reflectivity technique. Pg, Pn, mantle P, Lg and surface waves are included in the data as well as in the synthetics. The P velocity model follows closely that of Olsen et al. (1980,1) developed from shorter offset data. The lack of Sn in the observational data requires a thin mantle S lid not included in these earlier models. The complete set of synthetics replicate the transition of crustal P energy to mantle P around 900km, the rapid decay of Pg beyond 1000km, the lack of Sn energy, and the lower frequency content of Lg relative to the body wave arrivals. This wave propagation model is used to quantify the source effects from an explosion and spall source function. The explosion source is much less sensitive to depth of burial differences than the spall source. Spall and explosion source parameters constrained by near source data indicate that the importance of spall to the Lg phase is source time function dependent. If the peak of the spall source falls outside the low frequency window for Lg, then it has negligible contribution to the regional waveforms.

  3. Role of latitude of source region in Solar Energetic Particle events

    E-Print Network [OSTI]

    Sanahuja, Blai

    PR1 2HE, UK Department of Physics, University of Helsinki, 00014 Helsinki, Finland Abstract. Solar up to near- relativistic energies. Some of these particles can escape the solar atmosphere and travelRole of latitude of source region in Solar Energetic Particle events S. Dalla and N. Agueda1

  4. State of the Art of Air-source Heat Pump for Cold Regions 

    E-Print Network [OSTI]

    Tian, C.; Liang, N.

    2006-01-01T23:59:59.000Z

    In this paper, research on air source heat pump systems for cold regions in recent years is first summarized and compared. These systems can be divided into three kinds: a single-stage compression heat pump, liquid/vapor injection heat pump, and a...

  5. Mats Lindroos, Cristina Oyon and Stevey OECD "A High Power Spallation Source in each Global Region"

    E-Print Network [OSTI]

    McDonald, Kirk

    ESS Mats Lindroos, Cristina Oyon and Stevey Peggs #12;ESS 2 #12;OECD "A High Power Spallation Source in each Global Region" SNS Oak Ridge J-PARC Tokai ESS in Lund #12;ESS: Site selection process · ESS high up on the ESFRI list Th ti biddi f th it (Bilb L d d· Three consortia bidding for the site

  6. High power 325 MHz vector modulators for the Fermilab High Intensity Neutrino Source (HINS)

    SciTech Connect (OSTI)

    Madrak, Robyn Leigh; Wildman, David; /Fermilab

    2008-10-01T23:59:59.000Z

    One of the goals of the low energy 60 MeV section of the HINS H{sup -} linac [1] is to demonstrate that a total of {approx}40 RF cavities can be powered by a single 2.5 MW, 325 MHz klystron. This requires individual vector modulators at the input of each RF cavity to independently adjust the amplitude and phase of the RF input signal during the 3.5 ms RF pulse. Two versions of vector modulators have been developed; a 500 kW device for the radiofrequency quadrupole (RFQ) and a 75 kW modulator for the RF cavities. High power tests showing the vector modulator phase and amplitude responses will be presented.

  7. Electric Potential Near The Extraction Region In Negative Ion Sources With Surface Produced Negative Ions

    SciTech Connect (OSTI)

    Fukano, A. [Monozukuri Department, Tokyo Metropolitan College of Industrial Technology, 1-10-40 Higashi-Ohi, Shinagawa-ku, Tokyo 140-0011 (Japan); Hatayama, A. [Graduate School of Science and Technology, Keio University, 3-14-1 Hiyoshi, Kouhoku-ku, Yokohama 223-8522 (Japan)

    2011-09-26T23:59:59.000Z

    The potential distribution near the extraction region in negative ion sources for the plasma with the surface produced negative ions is studied analytically. The potential is derived analytically by using a plasma-sheath equation, where negative ions produced on the Plasma Grid (PG) surface are considered in addition to positive ions and electrons. A negative potential peak is formed in the sheath region near the PG surface for the case of strong surface production of negative ions or for low energy negative ions. Negative ions are reflected by the negative potential peak near the PG and returned to the PG surface. This reflection mechanism by the negative potential peak possibly becomes a factor in negative ion extraction. It is also indicated that the potential difference between the plasma region and the wall decreases by the surface produced negative ions. This also has the possibility to contribute to the negative ion extraction.

  8. Offsite Source Recovery Program (OSRP) Workshop Module: Tianjin, China, July 16-July 17, 2012

    SciTech Connect (OSTI)

    Houlton, Robert J. [Los Alamos National Laboratory

    2012-07-11T23:59:59.000Z

    Recovering and disposal of radioactive sources that are no longer in service in their intended capacity is an area of high concern Globally. A joint effort to recover and dispose of such sources was formed between the US Department of Energy and the Chinese Ministry of Environmental Protection (MEP), in preparation for the 2008 Beijing Olympics. LANL involvement in this agreement continues today under the DOE-Global Threat Reduction Initiative (GTRI) program. LANL will be presenting overview information on their Offsite Source Recovery (OSRP) and Source Disposal programs, in a workshop for the Ministry of Environmental Protection (MEP) at Tianjin, China, on July 16 and 17, 2012.

  9. Source Scaling of Single-Fired and Delay-Fired Explosions Constrained by In-Mine and Regional Seismograms

    E-Print Network [OSTI]

    Stump, Brian W.

    Source Scaling of Single-Fired and Delay-Fired Explosions Constrained by In-Mine and Regional (simultaneously detonated) explosions observed in the mine and at regional distances. These single-fired (360 km) using a seismic array near Pinedale, Wyoming (PDAR). The single-fired explosions ranged

  10. IMPULSIVE ACCELERATION OF CORONAL MASS EJECTIONS. I. STATISTICS AND CORONAL MASS EJECTION SOURCE REGION CHARACTERISTICS

    SciTech Connect (OSTI)

    Bein, B. M.; Berkebile-Stoiser, S.; Veronig, A. M.; Temmer, M.; Muhr, N.; Kienreich, I.; Utz, D. [IGAM/Institute of Physics, University of Graz, Universitaetsplatz 5, 8010 Graz (Austria); Vrsnak, B. [Hvar Observatory, Faculty of Geodesy, University of Zagreb, Kaciceva 26, HR-10000 Zagreb (Croatia)

    2011-09-10T23:59:59.000Z

    We use high time cadence images acquired by the STEREO EUVI and COR instruments to study the evolution of coronal mass ejections (CMEs) from their initiation through impulsive acceleration to the propagation phase. For a set of 95 CMEs we derived detailed height, velocity, and acceleration profiles and statistically analyzed characteristic CME parameters: peak acceleration, peak velocity, acceleration duration, initiation height, height at peak velocity, height at peak acceleration, and size of the CME source region. The CME peak accelerations we derived range from 20 to 6800 m s{sup -2} and are inversely correlated with the acceleration duration and the height at peak acceleration. Seventy-four percent of the events reach their peak acceleration at heights below 0.5 R{sub sun}. CMEs that originate from compact sources low in the corona are more impulsive and reach higher peak accelerations at smaller heights. These findings can be explained by the Lorentz force, which drives the CME accelerations and decreases with height and CME size.

  11. Regional Oxidant Model (ROM), Source code and test data (Version 2. 1). Model-Simulation

    SciTech Connect (OSTI)

    Not Available

    1991-01-01T23:59:59.000Z

    The Regional Oxidant Model (ROM) is a three-dimensional photochemical Eulerian grid model designed to simulate ambient concentrations of ozone and related species. ROM is a 3-layer model with a horizontal resolution of approximately 19 km; each grid cell has dimensions of 1/6 degree latitude by 1/4 degree longitude. The typical horizontal extent of the modeling domain is 1000 km. The model is designed to simulate hourly regional concentrations of ozone during largely stagnant summertime conditions that are associated with elevated smog episodes. The model is designed so that its preprocessors run on a VAX and the core model runs on an IBM mainframe. A typical 3-day simulation of the core model for the northeastern U.S. uses 9.5 hours of CPU on an IBM 3090. A total of 19 computer tapes comprise the release of the ROM (Version 2.1). Six of the tapes were generated on an IBM, and 13 tapes were generated on a VAX. The tapes contain source code, sample runstreams, and test data for a 3-day simulation. Potential users of the ROM should be aware that the modeling system is complex and requires extensive computer resources. The services of engineers, meteorologists, or computer scientists experienced in photochemical grid modeling are required.

  12. Regional Oxidant Model (ROM), (Source code only) (Version 2. 1). Model-Simulation

    SciTech Connect (OSTI)

    Not Available

    1991-01-01T23:59:59.000Z

    The Regional Oxidant Model (ROM) is a three-dimensional photochemical Eulerian grid model designed to simulate ambient concentrations of ozone and related species. ROM is a 3-layer model with a horizontal resolution of approximately 19 km; each grid cell has dimensions of 1/6 degree latitude by 1/4 degree longitude. The typical horizontal extent of the modeling domain is 1000 km. The model is designed to simulate hourly regional concentrations of ozone during largely stagnant summertime conditions that are associated with elevated smog episodes. The model is designed so that its preprocessors run on a VAX and the core model runs on an IBM mainframe. A typical 3-day simulation of the core model for the northeastern U.S. uses 9.5 hours of CPU on an IBM 3090. A total of 19 computer tapes comprise this release of the ROM (Version 2.1). Six of the tapes were generated on an IBM, and 13 tapes were generated on a VAX. The tapes contain source code, sample runstreams, and test data for a 3-day simulation. Potential users of the ROM should be aware that the modeling system is complex and requires extensive computer resources. The services of engineers, meteorologists, or computer scientists experienced in photochemical grid modeling are required.

  13. Module No: 410112Sources of ObligationModule Title: Co-requisite: Effects of ObligationsIntroduction of LawPre-requisite

    E-Print Network [OSTI]

    -mailOffice Number Office Phone Academic rank Instructor Name E-mailOffice Number Office Phone Academic rank Module in writing and composing legal research papers, reports and articles relevant to obligation Learning Outcomes

  14. Using Local and Regional Air Quality Modeling and Source Apportionment Tools to Evaluate Vehicles and Biogenic Emission Factors

    E-Print Network [OSTI]

    Kota, Sri H

    2014-07-25T23:59:59.000Z

    and inventories of CO, NO_(x) and VOCs from on-road vehicles estimated by vehicle emission factor models and biogenic emissions of isoprene estimated by a popular biogenic emission model are evaluated using local and regional scale air quality modeling and source...

  15. Depth and mineralogy of the magma source or pause region for the Carboniferous Liberty Hill pluton, South Carolina

    SciTech Connect (OSTI)

    Speer, J.A.

    1988-06-01T23:59:59.000Z

    Use of Al content geobarometry on clinopyroxene inclusions in plagioclase from the Carboniferous Liberty Hill pluton, South Carolina, yields pressure estimates of 8-10 kbar. Amphibole crystallization pressures are 3.1-4.7 kbar; contact metamorphic pressure are 4.5 kbar. Clinopyroxenes could be early crystallization products from the melt, restite crystals from the source region, xenocrysts from the magma conduit walls, or xenocrysts from a more mafic magma. Compositional uniformity of granitoid clinopyroxenes but dissimilarity with those in contemporaneous gabbroids is evidence against a xenocrystic origin. The deeper depths are interpreted as either the source region or a pausing place important in the crystallization history of the magma during its ascent to the upper crust. Early crystallization assemblage of the granitoid, and possibly the assemblage of the source region, was amphibole + clinopyroxene +/- plagioclase-bearing. An amphibolitic lower crustal source is consistent with the Sr and O isotopic and rare-earth-element studies of this and many other similar-age granitoids in the southern Appalachians.

  16. Correlation between simulations and cavitation-induced erosion damage in Spallation Neutron Source target modules after operation

    SciTech Connect (OSTI)

    Riemer, Bernie [ORNL] [ORNL; McClintock, David A [ORNL] [ORNL; Kaminskas, Saulius [ORNL] [ORNL; Abdou, Ashraf A [ORNL] [ORNL

    2014-01-01T23:59:59.000Z

    An explicit finite element (FE) technique developed for estimating dynamic strain in the Spallation Neutron Source (SNS) mercury target module vessel is now providing insight into cavitation damage patterns observed in used targets. The technique uses an empirically developed material model for the mercury that describes liquid-like volumetric stiffness combined with a tensile pressure cut-off limit that approximates cavitation. The longest period each point in the mercury is at the tensile cut-off threshold is denoted its saturation time. Now, the pattern of saturation time can be obtained from these simulations and is being positively correlated with observed damage patterns and is interpreted as a qualitative measure of damage potential. Saturation time has been advocated by collaborators at J-Parc as a factor in predicting bubble nuclei growth and collapse intensity. The larger the ratio of maximum bubble size to nucleus, the greater the bubble collapse intensity to be expected; longer saturation times result in greater ratios. With the recent development of a user subroutine for the FE solver saturation time is now provided over the entire mercury domain. Its pattern agrees with spots of damage seen above and below the beam axis on the SNS inner vessel beam window and elsewhere. The other simulation result being compared to observed damage patterns is mercury velocity at the wall. Related R&D has provided evidence for the damage mitigation that higher wall velocity provides. In comparison to observations in SNS targets, inverse correlation of high velocity to damage is seen. In effect, it is the combination of the patterns of saturation time and low velocity that seems to match actual damage patterns.

  17. Spatial structure of electric potential near the extraction region in Cs-seeded H{sup -} ion sources

    SciTech Connect (OSTI)

    Fukano, A.; Hanatani, J.; Matsumiya, T.; Hatayama, A. [Mechanical Sysytems Engineering Course, Monozukuri Department, Tokyo Metropolitan College of Industrial Technology, Higashioi, Shinagawa, Tokyo 140-0011 (Japan); Faculty of Science and Technology, Keio University, Hiyoshi, Yokohama 223-8522 (Japan)

    2008-02-15T23:59:59.000Z

    Structure of electric potential near the extraction region in a negative ion source is investigated analytically with the effect of strong surface H{sup -} production. The potential profile is analyzed one dimensional by solving the plasma-sheath equation, which gives the electric potential in the plasma region and the sheath region near the wall self-consistently. The potential profile depends on the production rate and the temperature of negative ions. As the production rate becomes large and the negative ion energy becomes small, the potential near the extraction region decreases. The negative potential peak is formed near the plasma grid (PG) surface for the case of large amount and low energy surface production. As a result, negative ions are reflected by this negative potential peak near the PG and returned to the PG surface. This reflection mechanism by the negative potential peak possibly affects the negative ion extraction.

  18. Groundwater Nitrogen Source Identification and Remediation in the Texas High Plains and Rolling Plains Regions

    E-Print Network [OSTI]

    Delaune, P.; Scanlon, B.; Reedy, R.; Schwartz, R.; Baumhardt, L.; Gregory, L.

    2013-01-01T23:59:59.000Z

    data on potential management strategies that can remediate groundwater nitrate levels, this project was developed. The primary objective was to identify sources of groundwater nitrate in the Texas High Plains and Rolling Plains and the secondary...

  19. Southern California Earthquake Center - SCEC1: Final Report Summary Alternative Earthquake Source Characterization for the Los Angeles Region

    SciTech Connect (OSTI)

    Foxall, B

    2003-02-26T23:59:59.000Z

    The objective my research has been to synthesize current understanding of the tectonics and faults of the Los Angeles Basin and surrounding region to quantify uncertainty in the characterization of earthquake sources used for geologically- and geodetically-based regional earthquake likelihood models. This work has focused on capturing epistemic uncertainty; i.e. uncertainty stemming from ignorance of the true characteristics of the active faults in the region and of the tectonic forces that drive them. In the present context, epistemic uncertainty has two components: First, the uncertainty in source geometrical and occurrence rate parameters deduced from the limited geological, geophysical and geodetic observations available; and second. uncertainties that result from fundamentally different interpretations of regional tectonic deformation and faulting. Characterization of the large number of active and potentially active faults that need to be included in estimating earthquake occurrence likelihoods for the Los Angeles region requires synthesis and evaluation of large amounts of data and numerous interpretations. This was accomplished primarily through a series of carefully facilitated workshops, smaller meetings involving key researchers, and email groups. The workshops and meetings were made possible by the unique logistical and financial resources available through SCEC, and proved to be extremely effective forums for the exchange and critical debate of data and interpretations that are essential in constructing fully representative source models. The main products from this work are a complete source model that characterizes all know or potentially active faults in the greater Los Angeles region. which includes the continental borderland as far south as San Diego, the Ventura Basin, and the Santa Barbara Channel. The model constitutes a series of maps and representative cross-sections that define alternative fault geometries, a table containing rault geometrical and slip-rate parameters, including full uncertainty distributions, and a set of logic trees that define alternative source characterizations, particularly for sets of fault systems having inter-dependent geometries and kinematics resulting from potential intersection and interaction in the sub-surface. All of these products exist in a form suitable for input to earthquake likelihood and seismic hazard analyses. In addition, moment-balanced Poissonian earthquake rates for the alternative multi-segment characterizations of each fault system have been estimated. Finally, this work has served an important integrative function in that the exchange and debate of data, results and ideas that it has engendered has helped to focus SCEC research over the past six years on to key issues in tectonic deformation and faulting.

  20. SOURCE?

    Energy Savers [EERE]

    Department of Energy (DOE) in partnership with Lawrence Berkeley National Laboratory (LBNL), is an open-source code package designed to be a common, low-cost, standardized tool...

  1. The morphology of the emission line region of Compact Steep Spectrum radio sources

    E-Print Network [OSTI]

    D. J. Axon; A. Capetti; R. Fanti; R. Morganti; A. Robinson; R. Spencer

    2000-06-26T23:59:59.000Z

    We present the results of HST narrow band imaging of eleven Compact Steep Spectrum (CSS) radio sources. Five of them (3C 48, 3C 147, 3C303.1, 3C 277.1 and 4C 12.50) were part of a dedicated ``pointed'' program of deep line imaging ([OIII]). For six additional sources (3C 49, 3C 93.1, 3C 138, 3C 268.3, 3C305.1 and 3C343.1) ``snapshot'' images ([OIII] or [OII]) were taken from the HST archive. In all but one of the targets (3C 49) line emission has been detected and only in one case (3C 138) is unresolved. In four out five of the sources with deep observations, the line emission extends well beyond the size of the radio source but along the radio axis. Structures of similar surface brightness would have not been seen in the snapshot images. These emission line structures extend to scales of 10 to 30 kpc and cover a projected angle, when seen from the nucleus, of 30 to 110 degrees, indicating that the nuclear illumination is anisotropic. Photon counting arguments also support this interpretation. In six objects the radio emission extends over more than 1 arcsec. In these cases the line emission has an elongated structure, linking the nucleus to the radio-lobes, possibly tracing the path of the invisible radio jets. Nevertheless the emission line morphologies do not show the bow shocks at the extremities of the radio lobes expected if they are sources whose expansion is frustrated by a dense external medium. Our data favour the alternative model in which CSSs are the young phase of the large size radio sources. When ``pointed'' pure continuum images are available, there appears to be no alignment between radio and continuum emission which contradicts previous suggestions based on broad-band HST imaging.

  2. Regional Sources of Nitrous Oxide over the United States: Seasonal Variation and Spatial Distribution

    SciTech Connect (OSTI)

    Miller, S. M.; Kort, E. A.; Hirsch, A. I.; Dlugokencky, E. J.; Andrews, A. E.; Xu, X.; Tian, H.; Nehrkorn, T.; Eluszkiewicz, J.; Michalak, A. M.; Wofsy, S. C.

    2012-01-01T23:59:59.000Z

    This paper presents top-down constraints on the magnitude, spatial distribution, and seasonality of nitrous oxide (N{sub 2}O) emissions over the central United States. We analyze data from tall towers in 2004 and 2008 using a high resolution Lagrangian particle dispersion model paired with both geostatistical and Bayesian inversions. Our results indicate peak N{sub 2}O emissions in June with a strong seasonal cycle. The spatial distribution of sources closely mirrors data on fertilizer application with particularly large N{sub 2}O sources over the US Cornbelt. Existing inventories for N{sub 2}O predict emissions that differ substantially from the inverse model results in both seasonal cycle and magnitude. We estimate a total annual N{sub 2}O budget over the central US of 0.9-1.2 TgN/yr and an extrapolated budget for the entire US and Canada of 2.1-2.6 TgN/yr. By this estimate, the US and Canada account for 12-15% of the total global N{sub 2}O source or 32-39% of the global anthropogenic source as reported by the Intergovernmental Panel on Climate Change in 2007.

  3. Sources and Pathways of Nutrients in the Semi-Arid Region of Beijing-Tianjin, China

    E-Print Network [OSTI]

    Wehrli, Bernhard

    to eutrophication, which causes immense ecological and economic problems. One region that is in transition eutrophication and even more rapidly than was previously observed in Europe. INTRODUCTION Eutrophication. In the western world, research on the mitigation of eutrophication conducted from the 1970 to the 1990s

  4. Heterogeneous Chemistry of Individual Mineral Dust Particles from Different Dust Source Regions: The Importance of Particle Mineralogy

    SciTech Connect (OSTI)

    Krueger, Brenda J.; Grassian, Vicki H.; Cowin, James P.; Laskin, Alexander

    2004-11-01T23:59:59.000Z

    The heterogeneous chemistry of individual dust particles from four different dust source regions is investigated on a particle-by-particle basis using state-of-the-art scanning electron microscopy techniques including computer-controlled scanning electron microscopy/computer-controlled X-ray analysis (CCSEM/EDX). Morphology and compositional changes of individual particles as they react with nitric acid are observed. Clear differences in the reactivity of mineral dusts from these four different dust regions with nitric acid could be observed. Mineral dust from source regions containing high levels of calcium, such as those found in parts of China and Saudi Arabia, are found to react to the greatest extent. Calcium containing minerals, such as calcite (CaCO3) and dolomite (CaMg(CO3)2), react to form nitrate salt whereas other calcium containing minerals such as gypsum (CaSO4?2H2O) do not react. The importance of particle chemical composition and mineralogy in the heterogeneous chemistry of mineral dust aerosols is definitively borne out in this study of individual dust particles.

  5. Scannerless laser range imaging using loss modulation

    DOE Patents [OSTI]

    Sandusky, John V. (Albuquerque, NM)

    2011-08-09T23:59:59.000Z

    A scannerless 3-D imaging apparatus is disclosed which utilizes an amplitude modulated cw light source to illuminate a field of view containing a target of interest. Backscattered light from the target is passed through one or more loss modulators which are modulated at the same frequency as the light source, but with a phase delay .delta. which can be fixed or variable. The backscattered light is demodulated by the loss modulator and detected with a CCD, CMOS or focal plane array (FPA) detector to construct a 3-D image of the target. The scannerless 3-D imaging apparatus, which can operate in the eye-safe wavelength region 1.4-1.7 .mu.m and which can be constructed as a flash LADAR, has applications for vehicle collision avoidance, autonomous rendezvous and docking, robotic vision, industrial inspection and measurement, 3-D cameras, and facial recognition.

  6. Regional Impact of an Elevated Heat Source: The Zagros Plateau of Iran BENJAMIN F. ZAITCHIK, JASON P. EVANS, AND RONALD B. SMITH

    E-Print Network [OSTI]

    Evans, Jason

    Regional Impact of an Elevated Heat Source: The Zagros Plateau of Iran BENJAMIN F. ZAITCHIK, JASON in the north, the Taurus Moun- tains of Turkey, and the Zagros Plateau in Iran. Inter- secting atmospheric

  7. Impact of external industrial sources on the regional and local SO[subscript 2] and O[subscript 3] levels of the Mexico megacity

    E-Print Network [OSTI]

    Almanza, Victor

    The air quality of megacities can be influenced by external emission sources on both global and regional scales. At the same time their outflow emissions can exert an impact to the surrounding environment. The present study ...

  8. Reservoir quality, sediment source, and regional aspects of Norphlet Formation, South State Line field, Greene County, Mississippi

    SciTech Connect (OSTI)

    Thomson, A.; Stancliffe, R.J.; Shew, R.D.

    1987-05-01T23:59:59.000Z

    South State Line field, discovered in 1970, is centrally located in the productive Jurassic Norphlet trend of the eastern Gulf Coast. The Norphlet Formation at South State Line has produced gas and condensate from normally pressured eolian sandstones at depths of more than 17,900 ft (5455 m). The 600-ft- (183-m) thick Norphlet Formation is composed of 100% sandstone and consists of two reservoir types: a poorer quality upper sandstone having low permeability (0.6 md) and a good-quality lower sandstone with better permeability (15.5 md). The upper sandstone exhibits tighter compaction of framework grains and more cement than the lower sandstone. Significantly, the upper sandstone contains authigenic illite (which promotes pressure solution), whereas the lower sandstone contains authigenic chlorite (which inhibits cementation and possibly pressure solution). On a regional scale, illite is the principal diagenetic clay mineral in the western area of the Norphlet trend (Mississippi to Texas), whereas chlorite is the principal diagenetic clay mineral in the east (Alabama to Florida). Not surprisingly, reservoir quality is poorer in the western portion of the trend. A comparison of framework grains in the upper and lower sandstones shows no significant compositional differences. Both are mature arkosic sandstones with a transitional-continental source (eastern Appalachians). No evidence was seen of a quartz-rich Ouachita or cratonic source. Volcanic and plutonic rock fragments are slightly more abundant in the lower sandstone, possibly reflecting a shifting of compositional terranes within a single source area along the eastern side of the Appalachians. The lower Norphlet sandstone may have been derived from Triassic volcanics, whereas the upper sandstone may have been derived from a more metamorphic source.

  9. Radiation source

    DOE Patents [OSTI]

    Thode, Lester E. (Los Alamos, NM)

    1981-01-01T23:59:59.000Z

    A device and method for relativistic electron beam heating of a high-density plasma in a small localized region. A relativistic electron beam generator or accelerator produces a high-voltage electron beam which propagates along a vacuum drift tube and is modulated to initiate electron bunching within the beam. The beam is then directed through a low-density gas chamber which provides isolation between the vacuum modulator and the relativistic electron beam target. The relativistic beam is then applied to a high-density target plasma which typically comprises DT, DD, or similar thermonuclear gas at a density of 10.sup.17 to 10.sup.20 electrons per cubic centimeter. The target gas is ionized prior to application of the relativistic electron beam by means of a laser or other preionization source to form a plasma. Utilizing a relativistic electron beam with an individual particle energy exceeding 3 MeV, classical scattering by relativistic electrons passing through isolation foils is negligible. As a result, relativistic streaming instabilities are initiated within the high-density target plasma causing the relativistic electron beam to efficiently deposit its energy into a small localized region of the high-density plasma target.

  10. OPERATIONAL RESULTS OF THE SPALLATION NEUTRON SOURCE (SNS) POLYPHASE CONVERTER-MODULATOR FOR THE 140 KV KLYSTRON RF SYSTEMS

    SciTech Connect (OSTI)

    W.A. REASS; J.D. DOSS; ET AL

    2001-06-01T23:59:59.000Z

    This paper describes the first operational results of the 140 kV, 1 MW average, 11 MW peak, zero-voltage-switching, 20 kHz polyphase bridge, boost converter-modulator for klystron pulse application. The DC-DC converter derives the buss voltages from a standard 13.8 kV to 2100 Y substation cast-core transformer. Energy storage and filtering is provided by self-clearing metallized hazy polypropylene traction capacitors. Three ''H-Bridge'' Insulated Gate Bipolar Transistor (IGBT) switching networks are used to generate the polyphase 20 kHz transformer primary drive waveforms. The 20 kHz drive waveforms are chirped the appropriate duration to generate the desired klystron pulse width. Pulse-Width Modulation (PWM) of the individual 20 kHz pulses is utilized to provide regulated output waveforms with adaptive feedforward and feedback techniques. The boost transformer design utilizes amorphous nanocrystalline material that provides the required low core loss at design flux levels and switching frequencies. Resonant shunt peaking is used on the transformer secondary to boost output voltage and resonate transformer leakage inductance. With the appropriate transformer leakage inductance and peaking capacitance, zero-voltage-switching of the IGBT's is attained, minimizing switching losses. Reviews of these design parameters and an examination of the first operational results will be performed.

  11. Operational results of the spallation neutron source (SNS) polyphase converter-modulator for the 140 KV klystron RF system

    SciTech Connect (OSTI)

    Reass, W. A. (William A.); Doss, James D.; Gribble, R. F. (Robert F.); Lynch, M. T. (Michael T.); Rees, D. E. (Daniel E.); Tallerico, P. J. (Paul J.); Borovina, D. L.

    2001-01-01T23:59:59.000Z

    This paper describes the first operational results of the 140 kV, 1 MW average, 11 MW peak, zero-voltageswitching, 20 kHz polyphase bridge, boost converter-modulator for klystron pulse application. The DC-DC converter derives the buss voltages from a standard 13.8 kV to 2100 Y substation cast-core transformer. Energy storage and filtering is provided by self-clearing metallized hazy polypropylene traction capacitors. Three 'H-Bridge' Insulated Gate Bipolar Transistor (IGBT) switching networks are used to generate the polyphase 20 kHz transformer primary drive waveforms. The 20 kHz drive waveforms are chirped the appropriate duration to generate the desired klystron pulse width. Pulse-Width Modulation (PWM) of the individual 20 kHz pulses is utilized to provide regulated output waveforms with adaptive feedforward and feedback techniques. The boost transformer design utilizes amorphous nanocrystalline material that provides the required low core loss at design flux levels and switching frequencies. Resonant shunt peaking is used on the transformer secondary to boost output voltage and resonate transformer leakage inductance. With the appropriate transformer leakage inductance and peaking capacitance, zero-voltage-switching of the IGBT's is attained, minimizing switching losses. Reviews of these design parameters and an examination of the first operational results will be performed.

  12. System and method of modulating electrical signals using photoconductive wide bandgap semiconductors as variable resistors

    DOE Patents [OSTI]

    Harris, John Richardson; Caporaso, George J; Sampayan, Stephen E

    2013-10-22T23:59:59.000Z

    A system and method for producing modulated electrical signals. The system uses a variable resistor having a photoconductive wide bandgap semiconductor material construction whose conduction response to changes in amplitude of incident radiation is substantially linear throughout a non-saturation region to enable operation in non-avalanche mode. The system also includes a modulated radiation source, such as a modulated laser, for producing amplitude-modulated radiation with which to direct upon the variable resistor and modulate its conduction response. A voltage source and an output port, are both operably connected to the variable resistor so that an electrical signal may be produced at the output port by way of the variable resistor, either generated by activation of the variable resistor or propagating through the variable resistor. In this manner, the electrical signal is modulated by the variable resistor so as to have a waveform substantially similar to the amplitude-modulated radiation.

  13. A Beat Frequency RF Modulator for Generation of Low Repetition Rate Electron Microbunches for the CEBAF Polarized Source

    SciTech Connect (OSTI)

    John Musson; Reza Kazimi; Benard Poelker; Joseph Grames; John Hansknecht

    2007-06-25T23:59:59.000Z

    Fiber-based drive lasers now produce all of the spin-polarized electron beams at CEBAF/Jefferson Lab. The flexibility of these drive lasers, combined with the existing three-beam CEBAF photoinjector Chopper, provides a means to implement a beat frequency technique to produce long time intervals between individual electron microbunches (tens of nanoseconds) by merely varying the nominal 499 MHz drive laser frequency by < 20%. This submission describes the RF Laser modulator that uses a divider and heterodyne scheme to maintain coherence with the accelerator Master Oscillator (MO), while providing delay resolution in increments of 2ns. Some possible uses for such a beam are discussed as well as intended future development.

  14. Identification of potential sources and source regions of fine ambient particles measured at Gosan background site in Korea using advanced hybrid receptor model combined with positive matrix factorization - article no. D22217

    SciTech Connect (OSTI)

    Han, J.S.; Moon, K.J.; Kim, Y.J. [National Institute of Environmental Research, Inchon (Republic of Korea). Dept. of Air Quality Research

    2006-11-15T23:59:59.000Z

    The size- and time-resolved measurement of particulate trace elements was made using an eight-stage Davis Rotating Unit for Monitoring sampler and synchrotron X-ray fluorescence system from 29 March to 29 May in 2002 at Gosan, Korea, which is one of the representative background sites in east Asia. A sa result, continuous 3-hour average concentrations were obtained for 19 elements including S, Si, Al, Fe, Ca, Cl, Cu, Zn, Ti, K, Mn, Pb, Ni, V, Se, As, Rb, Cr, and Br. Positive matrix factorization (PMF) method was applied to the size-resolved aerosol data sets in order to identify the possible sources and to estimate their contribution to particulate matter mass in each size range. Twelve sources were then resolved in the fine size range ( 0.07 to 1.15 {mu}m), including continental aerosol, biomass burning, coal combustion, oil heating furnace, residual oil-fired boiler, municipal incineration, nonferrous metal source, ferrous metal source, gasoline vehicle, diesel vehicle, copper smelter, and volcanic emission. A newly developed hybrid receptor model, concentration, retention time, and source emission weighted trajectory (CRSWT) was then applied to the source intensities derived from the PMF analysis by incorporating meteorological and source inventory information of the study region in order to suggest the regional information of long-range transported fine aerosol sources. The CRSWT model was able to resolve highly potential source areas and pathways for the fine ambient aerosol at the Gosan background site.

  15. The effects of airflow modulation and multi-stage defrost on the performance of an air source heat pump

    E-Print Network [OSTI]

    Payne, William Vance

    1992-01-01T23:59:59.000Z

    . This transfer of heat energy from a low temperature ambient to the high temperature conditioned space is accomplished by the input of electrical energy to the compressor. During the heating season, the heat pump transfers heat energy from the low temperature... pump refrigeration circuit includes a compressor, an indoor heat exchanger, an outdoor heat exchanger, an expansion device, and fans to transfer heat energy from a low temperature heat energy source to a higher temperature heat energy sink...

  16. Energy deposition in the body from external sources to chemically trigger cellular responses in desired localized regions

    E-Print Network [OSTI]

    Ibsen, Stuart Duncan

    2011-01-01T23:59:59.000Z

    blast region was not centered at the smaller microbubble because only the effectthe blast region measures at 49 µm in diameter. The effectblast region and measures at 12 µm in diameter. Discussion The effect

  17. Foramol carbonate shelves as depositional site and source area: Recent and ancient examples from the Mediterranean region

    SciTech Connect (OSTI)

    Carannante, G.; Simone, L.

    1988-08-01T23:59:59.000Z

    In recent environments, only limited carbonate depositional areas are dominated by coral reefs. Such platforms frequently develop rimmed margins and are characterized by chlorozoan facies with large contributions of nonskeletal grains. They are practically limited to warm tropical seas. In temperate seas as well as anomalous tropical zones, large areas of the middle-outer shelf are covered by skeletal debris with variable amounts of mollusks, foraminifers, coralline algae, bryozoans, etc (foramol facies). Apart from the skeletal fragments derived from the shallow inner shelf and the contribution from local endobiota and epibiota, the source of the bioclastic sediments may be found in limited and scattered areas supporting active carbonate-producing assemblages. Fossil counterparts of similar deposits are present in the Mediterranean region (e.g., Spain, Italy, Malta, Libya), locally showing good reservoir properties. Examples are described from the Miocene of the Southern Apennines (Italy) where a variety rich in encrusting coralline algae is present, as well as from the Upper Cretaceous of the Southern Apennines and northwest Sardinia (Italy) where scattered rudistid buildups are associated with bioclastic sediments rich in coralline algae and bryozoans.

  18. Estimates of the absorbed fraction of energy for various electron source and target regions in the upper respiratory tract 

    E-Print Network [OSTI]

    Calvo, Sebastian

    1994-01-01T23:59:59.000Z

    . ACKNOWLEDGMENTS The author would like to thank committee members Drs. Wesley Bolch and John Poston of thc Nuclear Engineering Department, Dr. Keith Eckerman of the Oak Ridge National Laboratory and the Nuclear Engineering Department, and Dr. Michael Walker... INFORMATION MATERIALS AND METHODS . The Model Used in This Study EGS4 Code RESULTS . Source in Tracheal Airway Source on Tracheal Airway Surface Source on Carinal Ridge Surface Source in Airways of Main Bronchi and Bifurcation Zone DISCUSSION...

  19. Travel-time distribution from a finite line contamination source to an extraction well with regional flow

    E-Print Network [OSTI]

    Zhan, Hongbin

    to an extraction well with regional flow Hongbin Zhan a,*, Dongmin Sun b a Department of Geology and Geophyscis

  20. Quantification of explosion source characteristics from near-source, regional and teleseismic distances. Final report, 23 February 1987-31 July 1989

    SciTech Connect (OSTI)

    Stump, B.; Reamer, S.; Anderson, D.; Olsen, K.; Reinke, R.

    1989-07-31T23:59:59.000Z

    Work over the contract period is summarized in four papers: (1) Source Parameter Estimation for Large, Bermed, Surface Chemical Explosions; (2) Seismic Wave Generation by Mine Blasts; (3) Pomona Quarry Seismic Experiment, Near-Source Data; and (4) MISTY ECHO, The Seismic Source Physics Experiment. The first paper attempts to qualify source differences between large surface chemical explosions ranging in yields from 0.075 to 1.65 kilotons. The second paper documents millisecond delay blasting practices in the mining industry and illustrates the effects of these practices on near-source seismic observations. The effects of scatter in design blasting times is illustrated. A set of experiments designed to begin the comparison between single and production mining explosions are described in the third paper. The multiple explosion production shot was documented with high speed photography so that the design and actual firing times of the individual explosions could be compared. The final paper is a preliminary data report describing the first of a series of free field and free surface seismic experiments designed to document the effects of the free surface on seismic radiation from underground nuclear explosions. The particular experiment, MISTY ECHO, was detonated in Rainier Mesa at the Nevada Test Site.

  1. In situ measurements of speciated atmospheric mercury and the identification of source regions in the Mexico City Metropolitan Area

    E-Print Network [OSTI]

    Rutter, A. P.

    In order to expand the currently limited understanding of atmospheric mercury source-receptor relationships in the Mexico City Metropolitan Area, real time measurements of atmospheric mercury were made at a downtown urban ...

  2. Regional Seismic Signals from Chemical Explosions, Nuclear Explosions and Earthquakes: Results from the Arizona Source Phenomenology Experiment

    SciTech Connect (OSTI)

    Walter, W R; Gok, R; Mayeda, K; Sicherman, A; Bonner, J; Leidig, M

    2005-09-02T23:59:59.000Z

    Routine industrial mining explosions play two important roles in seismic nuclear monitoring research: (1) they are a source of background events that need to be discriminated from potential nuclear explosions; (2) as some of the only explosions occurring in the current de facto global moratoria on nuclear testing, their signals should be exploited to improve the calibration of seismic m monitoring systems. A common issue monitoring arising in both of these roles is our limited physical understanding of the causes behind observed differences and similarities in the seismic signals produced by routine industrial mining blasts and small underground nuclear tests. In 2003 a consortium (Weston, SMU, LLNL, LANL and UTEP) carried out a Source Phenomenology Experiment (SPE), a series of dedicated explosions designed to improve this physical understanding, particularly as it relates to seismic methods of discriminating between signals from three different source types: earthquakes, industrial blasts, and nuclear tests. Here we very briefly review prior field experimental work that examined the seismic relationships between these source types.

  3. SOURCE REGIONS OF THE INTERPLANETARY MAGNETIC FIELD AND VARIABILITY IN HEAVY-ION ELEMENTAL COMPOSITION IN GRADUAL SOLAR ENERGETIC PARTICLE EVENTS

    SciTech Connect (OSTI)

    Ko, Yuan-Kuen; Wang, Yi-Ming [Space Science Division, Naval Research Laboratory, Code 7680, Washington, DC 20375 (United States); Tylka, Allan J. [NASA Goddard Space Flight Center, Code 672, Greenbelt, MD 20771 (United States); Ng, Chee K. [College of Science, George Mason University, Fairfax, VA 22030 (United States); Dietrich, William F., E-mail: yko@ssd5.nrl.navy.mil [Praxis, Inc., Alexandria, VA 22303 (United States)

    2013-10-20T23:59:59.000Z

    Gradual solar energetic particle (SEP) events are those in which ions are accelerated to their observed energies by interactions with a shock driven by a fast coronal mass ejection (CME). Previous studies have shown that much of the observed event-to-event variability can be understood in terms of shock speed and evolution in the shock-normal angle. However, an equally important factor, particularly for the elemental composition, is the origin of the suprathermal seed particles upon which the shock acts. To tackle this issue, we (1) use observed solar-wind speed, magnetograms, and the potential-field source-surface model to map the Sun-L1 interplanetary magnetic field (IMF) line back to its source region on the Sun at the time of the SEP observations and (2) then look for a correlation between SEP composition (as measured by Wind and Advanced Composition Explorer at ?2-30 MeV nucleon{sup –1}) and characteristics of the identified IMF source regions. The study is based on 24 SEP events, identified as a statistically significant increase in ?20 MeV protons and occurring in 1998 and 2003-2006, when the rate of newly emergent solar magnetic flux and CMEs was lower than in solar-maximum years, and the field-line tracing is therefore more likely to be successful. We find that the gradual SEP Fe/O is correlated with the field strength at the IMF source, with the largest enhancements occurring when the footpoint field is strong due to the nearby presence of an active region (AR). In these cases, other elemental ratios show a strong charge-to-mass (q/M) ordering (at least on average), similar to that found in impulsive events. Such results lead us to suggest that magnetic reconnection in footpoint regions near ARs bias the heavy-ion composition of suprathermal seed ions by processes qualitatively similar to those that produce larger heavy-ion enhancements in impulsive SEP events. To address potential technical concerns about our analysis, we also discuss efforts to exclude impulsive SEP events from our event sample.

  4. Module Configuration

    DOE Patents [OSTI]

    Oweis, Salah (Ellicott City, MD); D'Ussel, Louis (Bordeaux, FR); Chagnon, Guy (Cockeysville, MD); Zuhowski, Michael (Annapolis, MD); Sack, Tim (Cockeysville, MD); Laucournet, Gaullume (Paris, FR); Jackson, Edward J. (Taneytown, MD)

    2002-06-04T23:59:59.000Z

    A stand alone battery module including: (a) a mechanical configuration; (b) a thermal management configuration; (c) an electrical connection configuration; and (d) an electronics configuration. Such a module is fully interchangeable in a battery pack assembly, mechanically, from the thermal management point of view, and electrically. With the same hardware, the module can accommodate different cell sizes and, therefore, can easily have different capacities. The module structure is designed to accommodate the electronics monitoring, protection, and printed wiring assembly boards (PWAs), as well as to allow airflow through the module. A plurality of modules may easily be connected together to form a battery pack. The parts of the module are designed to facilitate their manufacture and assembly.

  5. Spectrum and Morphology of the Two Brightest Milagro Sources in the Cygnus Region: MGRO J2019+37 and MGRO J2031+41

    E-Print Network [OSTI]

    Abdo, A A; Aune, T; Berley, D; Bonamente, E; Christopher, G E; DeYoung, T; Dingus, B L; Ellsworth, R W; Galbraith-Frew, J G; Gonzalez, M M; Goodman, J A; Hoffman, C M; Huentemeyer, P H; Kolterman, B E; Linnemann, J T; McEnery, J E; Mincer, A I; Morgan, T; Nemethy, P; Pretz, J; Ryan, J M; Parkinson, P M Saz; Sinnis, G; Smith, A J; Vasileiou, V; Walker, G P; Williams, D A; Yodh, G B

    2012-01-01T23:59:59.000Z

    The Cygnus region is a very bright and complex portion of the TeV sky, host to unidentified sources and a diffuse excess with respect to conventional cosmic-ray propagation models. Two of the brightest TeV sources, MGRO J2019+37 and MGRO J2031+41, are analyzed using Milagro data with a new technique, and their emission is tested under two different spectral assumptions: a power law and a power law with an exponential cutoff. The new analysis technique is based on an energy estimator that uses the fraction of photomultiplier tubes in the observatory that detect the extensive air shower. The photon spectrum is measured in the range 1 to 200 TeV using the last 3 years of Milagro data (2005-2008), with the detector in its final configuration. MGRO J2019+37 is detected with a significance of 12.3 standard deviations ($\\sigma$), and is better fit by a power law with an exponential cutoff than by a simple power law, with a probability $>98$% (F-test). The best-fitting parameters for the power law with exponential cu...

  6. SPECTRUM AND MORPHOLOGY OF THE TWO BRIGHTEST MILAGRO SOURCES IN THE CYGNUS REGION: MGRO J2019+37 AND MGRO J2031+41

    SciTech Connect (OSTI)

    Abdo, A. A.; Abeysekara, U.; Linnemann, J. T. [Department of Physics and Astronomy, Michigan State University, 3245 BioMedical Physical Sciences Building, East Lansing, MI 48824 (United States); Allen, B. T. [Department of Physics and Astronomy, University of California, Irvine, CA 92697 (United States); Aune, T. [Santa Cruz Institute for Particle Physics, University of California, 1156 High Street, Santa Cruz, CA 95064 (United States); Berley, D.; Goodman, J. A. [Department of Physics, University of Maryland, College Park, MD 20742 (United States); Bonamente, E.; Galbraith-Frew, J. G.; Huentemeyer, P. H.; Hui, C. M. [Department of Physics, Michigan Technological University, Houghton, MI 49931 (United States); Christopher, G. E.; Kolterman, B. E.; Mincer, A. I. [Department of Physics, New York University, 4 Washington Place, New York, NY 10003 (United States); DeYoung, T. [Department of Physics, Pennsylvania State University, University Park, PA 16802 (United States); Dingus, B. L.; Hoffman, C. M. [Group P-23, Los Alamos National Laboratory, P.O. Box 1663, Los Alamos, NM 87545 (United States); Ellsworth, R. W. [Department of Physics and Astronomy, George Mason University, 4400 University Drive, Fairfax, VA 22030 (United States); Gonzalez, M. M. [Instituto de Astronomia, Universidad Nacional Autonoma de Mexico, 74D.F., Mexico 04510 (Mexico); McEnery, J. E., E-mail: ebonamen@mtu.edu, E-mail: petra@mtu.edu [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); and others

    2012-07-10T23:59:59.000Z

    The Cygnus region is a very bright and complex portion of the TeV sky, host to unidentified sources and a diffuse excess with respect to conventional cosmic-ray propagation models. Two of the brightest TeV sources, MGRO J2019+37 and MGRO J2031+41, are analyzed using Milagro data with a new technique, and their emission is tested under two different spectral assumptions: a power law and a power law with an exponential cutoff. The new analysis technique is based on an energy estimator that uses the fraction of photomultiplier tubes in the observatory that detect the extensive air shower. The photon spectrum is measured in the range 1-100 TeV using the last three years of Milagro data (2005-2008), with the detector in its final configuration. An F-test indicates that MGRO J2019+37 is better fit by a power law with an exponential cutoff than by a simple power law. The best-fitting parameters for the power law with exponential cutoff model are a normalization at 10 TeV of 7{sup +5}{sub -2} Multiplication-Sign 10{sup -10} s{sup -1} m{sup -2} TeV{sup -1}, a spectral index of 2.0{sup +0.5}{sub -1.0}, and a cutoff energy of 29{sup +50}{sub -16} TeV. MGRO J2031+41 shows no evidence of a cutoff. The best-fitting parameters for a power law are a normalization of 2.1{sup +0.6}{sub -0.6} Multiplication-Sign 10{sup -10} s{sup -1} m{sup -2} TeV{sup -1} and a spectral index of 3.22{sup +0.23}{sub -0.18}. The overall flux is subject to a {approx}30% systematic uncertainty. The systematic uncertainty on the power-law indices is {approx}0.1. Both uncertainties have been verified with cosmic-ray data. A comparison with previous results from TeV J2032+4130, MGRO J2031+41, and MGRO J2019+37 is also presented.

  7. Quantum modulation against electromagnetic interference

    E-Print Network [OSTI]

    Juan Carlos Garcia-Escartin

    2014-11-26T23:59:59.000Z

    Periodic signals in electrical and electronic equipment can cause interference in nearby devices. Randomized modulation of those signals spreads their energy through the frequency spectrum and can help to mitigate electromagnetic interference problems. The inherently random nature of quantum phenomena makes them a good control signal. I present a quantum modulation method based on the random statistics of quantum light. The paper describes pulse width modulation schemes where a Poissonian light source acts as a random control that spreads the energy of the potential interfering signals. I give an example application for switching-mode power supplies and comment the further possibilities of the method.

  8. Ion transport membrane module and vessel system

    DOE Patents [OSTI]

    Stein, VanEric Edward (Allentown, PA); Carolan, Michael Francis (Allentown, PA); Chen, Christopher M. (Allentown, PA); Armstrong, Phillip Andrew (Orefield, PA); Wahle, Harold W. (North Canton, OH); Ohrn, Theodore R. (Alliance, OH); Kneidel, Kurt E. (Alliance, OH); Rackers, Keith Gerard (Louisville, OH); Blake, James Erik (Uniontown, OH); Nataraj, Shankar (Allentown, PA); van Doorn, Rene Hendrik Elias (Obersulm-Willsbach, DE); Wilson, Merrill Anderson (West Jordan, UT)

    2008-02-26T23:59:59.000Z

    An ion transport membrane system comprising (a) a pressure vessel having an interior, an exterior, an inlet, and an outlet; (b) a plurality of planar ion transport membrane modules disposed in the interior of the pressure vessel and arranged in series, each membrane module comprising mixed metal oxide ceramic material and having an interior region and an exterior region, wherein any inlet and any outlet of the pressure vessel are in flow communication with exterior regions of the membrane modules; and (c) one or more gas manifolds in flow communication with interior regions of the membrane modules and with the exterior of the pressure vessel.The ion transport membrane system may be utilized in a gas separation device to recover oxygen from an oxygen-containing gas or as an oxidation reactor to oxidize compounds in a feed gas stream by oxygen permeated through the mixed metal oxide ceramic material of the membrane modules.

  9. Ion transport membrane module and vessel system

    DOE Patents [OSTI]

    Stein, VanEric Edward (Allentown, PA); Carolan, Michael Francis (Allentown, PA); Chen, Christopher M. (Allentown, PA); Armstrong, Phillip Andrew (Orefield, PA); Wahle, Harold W. (North Canton, OH); Ohrn, Theodore R. (Alliance, OH); Kneidel, Kurt E. (Alliance, OH); Rackers, Keith Gerard (Louisville, OH); Blake, James Erik (Uniontown, OH); Nataraj, Shankar (Allentown, PA); Van Doorn, Rene Hendrik Elias (Obersulm-Willsbach, DE); Wilson, Merrill Anderson (West Jordan, UT)

    2012-02-14T23:59:59.000Z

    An ion transport membrane system comprising (a) a pressure vessel having an interior, an exterior, an inlet, and an outlet; (b) a plurality of planar ion transport membrane modules disposed in the interior of the pressure vessel and arranged in series, each membrane module comprising mixed metal oxide ceramic material and having an interior region and an exterior region, wherein any inlet and any outlet of the pressure vessel are in flow communication with exterior regions of the membrane modules; and (c) one or more gas manifolds in flow communication with interior regions of the membrane modules and with the exterior of the pressure vessel. The ion transport membrane system may be utilized in a gas separation device to recover oxygen from an oxygen-containing gas or as an oxidation reactor to oxidize compounds in a feed gas stream by oxygen permeated through the mixed metal oxide ceramic material of the membrane modules.

  10. Thermionic modules

    DOE Patents [OSTI]

    King, Donald B. (Albuquerque, NM); Sadwick, Laurence P. (Salt Lake City, UT); Wernsman, Bernard R. (Clairton, PA)

    2002-06-18T23:59:59.000Z

    Modules of assembled microminiature thermionic converters (MTCs) having high energy-conversion efficiencies and variable operating temperatures manufactured using MEMS manufacturing techniques including chemical vapor deposition. The MTCs incorporate cathode to anode spacing of about 1 micron or less and use cathode and anode materials having work functions ranging from about 1 eV to about 3 eV. The MTCs also exhibit maximum efficiencies of just under 30%, and thousands of the devices and modules can be fabricated at modest costs.

  11. General Message Flow Modulator Ann E. Siebert

    E-Print Network [OSTI]

    Boyer, Robert Stephen

    General Message Flow Modulator Ann E. Siebert Donald I. Good Technical Report #42 March 1984 (512) 471-1901 #12;Abstract The general message flow modulator is a high level design of a family of mechanisms for controlling the flow of messages from a source to a destination. This family of mechanisms has

  12. Thermoelectric module

    DOE Patents [OSTI]

    Kortier, William E. (Columbus, OH); Mueller, John J. (Columbus, OH); Eggers, Philip E. (Columbus, OH)

    1980-07-08T23:59:59.000Z

    A thermoelectric module containing lead telluride as the thermoelectric mrial is encapsulated as tightly as possible in a stainless steel canister to provide minimum void volume in the canister. The lead telluride thermoelectric elements are pressure-contacted to a tungsten hot strap and metallurgically bonded at the cold junction to iron shoes with a barrier layer of tin telluride between the iron shoe and the p-type lead telluride element.

  13. Photovoltaic module and module arrays

    DOE Patents [OSTI]

    Botkin, Jonathan (El Cerrito, CA); Graves, Simon (Berkeley, CA); Lenox, Carl J. S. (Oakland, CA); Culligan, Matthew (Berkeley, CA); Danning, Matt (Oakland, CA)

    2012-07-17T23:59:59.000Z

    A photovoltaic (PV) module including a PV device and a frame. The PV device has a PV laminate defining a perimeter and a major plane. The frame is assembled to and encases the laminate perimeter, and includes leading, trailing, and side frame members, and an arm that forms a support face opposite the laminate. The support face is adapted for placement against a horizontal installation surface, to support and orient the laminate in a non-parallel or tilted arrangement. Upon final assembly, the laminate and the frame combine to define a unitary structure. The frame can orient the laminate at an angle in the range of 3.degree.-7.degree. from horizontal, and can be entirely formed of a polymeric material. Optionally, the arm incorporates integral feature(s) that facilitate interconnection with corresponding features of a second, identically formed PV module.

  14. Photovoltaic module and module arrays

    DOE Patents [OSTI]

    Botkin, Jonathan; Graves, Simon; Lenox, Carl J. S.; Culligan, Matthew; Danning, Matt

    2013-08-27T23:59:59.000Z

    A photovoltaic (PV) module including a PV device and a frame, The PV device has a PV laminate defining a perimeter and a major plane. The frame is assembled to and encases the laminate perimeter, and includes leading, trailing, and side frame members, and an arm that forms a support face opposite the laminate. The support face is adapted for placement against a horizontal installation surface, to support and orient the laminate in a non-parallel or tilted arrangement. Upon final assembly, the laminate and the frame combine to define a unitary structure. The frame can orient the laminate at an angle in the range of 3.degree.-7.degree. from horizontal, and can be entirely formed of a polymeric material. Optionally, the arm incorporates integral feature(s) that facilitate interconnection with corresponding features of a second, identically formed PV module.

  15. Supplementary materials of "High-resolution back-projection at regional distance: application to the Haiti M7.0 earthquake and comparisons with finite source studies"

    E-Print Network [OSTI]

    Ampuero, Jean Paul

    to the Haiti M7.0 earthquake and comparisons with finite source studies" L. Meng1 , J.-P. Ampuero1 , A. Sladen2 empty circles are the aftershock epicenters of the Haiti- #12;OBS campaign. The two inset maps show

  16. Ultracompact HII Regions

    E-Print Network [OSTI]

    Stan Kurtz; Jose Franco

    2001-11-20T23:59:59.000Z

    We review some recent observational results on the properties of ultracompact HII regions, in particular the presence of extended continuum emission surrounding ultracompact sources and the discovery of a new class of so-called ``Hypercompact'' HII regions. In addition, we discuss recent attempts to probe the density structure within UC HII regions using the technique of spectral index analysis.

  17. High-resolution back-projection at regional distance: application to the Haiti1 M7.0 earthquake and comparisons with finite source studies2

    E-Print Network [OSTI]

    Ampuero, Jean Paul

    High-resolution back-projection at regional distance: application to the Haiti1 M7.0 earthquake ruptured on January 12th 2010 on a complex fault10 system near Port-au-Prince, Haiti. Offshore rupture earthquake that hit Haiti in January 2010 was one of the most devastating37 natural disasters of the last

  18. High-resolution back-projection at regional distance: application to the Haiti1 M7.0 earthquake and comparisons with finite source studies2

    E-Print Network [OSTI]

    Ampuero, Jean Paul

    High-resolution back-projection at regional distance: application to the Haiti1 M7.0 earthquake ruptured on January 12th 2010 on a complex fault10 system near Port-au-Prince, Haiti. Offshore rupture that hit Haiti in January 2010 was one of the most devastating34 natural disasters of the last decades

  19. Supported PV module assembly

    DOE Patents [OSTI]

    Mascolo, Gianluigi; Taggart, David F.; Botkin, Jonathan D.; Edgett, Christopher S.

    2013-10-15T23:59:59.000Z

    A supported PV assembly may include a PV module comprising a PV panel and PV module supports including module supports having a support surface supporting the module, a module registration member engaging the PV module to properly position the PV module on the module support, and a mounting element. In some embodiments the PV module registration members engage only the external surfaces of the PV modules at the corners. In some embodiments the assembly includes a wind deflector with ballast secured to a least one of the PV module supports and the wind deflector. An array of the assemblies can be secured to one another at their corners to prevent horizontal separation of the adjacent corners while permitting the PV modules to flex relative to one another so to permit the array of PV modules to follow a contour of the support surface.

  20. A Catalog of CH_3OH 7_0-6_1 A^+ Maser Sources in Massive Star-Forming Regions. II. Masers in NGC 6334F, G8.67-0.36, and M17

    E-Print Network [OSTI]

    Gomez, Laura; Hernandez-Curiel, Idalia; Kurtz, Stan; Hofner, Peter; Araya, Esteban

    2010-01-01T23:59:59.000Z

    We present Very Large Array observations of the 7_0-6_1 A^+ methanol maser transition at 44 GHz towards NGC 6334F, G8.67-0.36, and M17. These arcsecond resolution observations complete a previous, larger VLA survey of this maser transition in high-mass star-forming regions reported by Kurtz et al. We confirm the presence of 44 GHz methanol maser emission in all three sources, detecting eight distinct maser components in NGC 6334F, twelve components in G8.67-0.36 and one in M17.

  1. Criticality calculations for Step-2 GPHS modules.

    SciTech Connect (OSTI)

    Hensen, Danielle Lynn; Lipinski, Ronald J.

    2007-08-01T23:59:59.000Z

    The Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) will use an improved version of the General Purpose Heat Source (GPHS) module as its source of thermal power. This new version, referred to as the Step-2 GPHS Module, has additional and thicker layers of carbon fiber material (Fine Weaved Pierced Fabric) for increased strength over the original GPHS module. The GPHS uses alpha decay of {sup 238}Pu in the oxide form as the primary source of heat, and small amounts of other actinides are also present in the oxide fuel. Criticality calculations have been performed by previous researchers on the original version of the GPHS module (Step 0). This paper presents criticality calculations for the present Step-2 version. The Monte Carlo N-Particle eXtended code (MCNPX) was used for these calculations. Numerous configurations of GPHS module arrays surrounded by wet sand and other materials (to reflect the neutrons back into the stack with minimal absorption) were modeled. For geometries with eight GPHS modules (from a single MMRTG) surrounded by wet sand, the configuration is extremely sub-critical; k{sub eff} is about 0.3. It requires about 1000 GPHS modules (from 125 MMRTGs) in a close-spaced stack to approach criticality (k{sub eff} = 1.0) when surrounded by wet sand. The effect of beryllium in the MMRTG was found to be relatively small.

  2. Criticality Calculations for Step-2 GPHS Modules

    SciTech Connect (OSTI)

    Lipinski, Ronald J. [Advanced Nuclear Concepts Department, Sandia National Laboratories, P.O Box 5800, Albuquerque, NM 87185 (United States); Hensen, Danielle L. [Risk and Reliability Department Sandia National Laboratories, P.O Box 5800, Albuquerque, NM 87185 (United States)

    2008-01-21T23:59:59.000Z

    The Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) will use an improved version of the General Purpose Heat Source (GPHS) module as its source of thermal power. This new version, referred to as the Step-2 GPHS Module, has additional and thicker layers of carbon fiber material (Fine Weaved Pierced Fabric) for increased strength over the original GPHS module. The GPHS uses alpha decay of {sup 238}Pu in the oxide form as the primary source of heat, and small amounts of other actinides are also present in the oxide fuel. Criticality calculations have been performed by previous researchers on the original version of the GPHS module (Step 0). This paper presents criticality calculations for the present Step-2 version. The Monte Carlo N-Particle eXtended code (MCNPX) was used for these calculations. Numerous configurations of GPHS module arrays surrounded by wet sand and other materials (to reflect the neutrons back into the stack with minimal absorption) were modeled. For geometries with eight GPHS modules (from a single MMRTG) surrounded by wet sand, the configuration is extremely sub-critical; k{sub eff} is about 0.3. It requires about 1000 GPHS modules (from 125 MMRTGs) in a close-spaced stack to approach criticality (k{sub eff} = 1.0) when surrounded by wet sand. The effect of beryllium in the MMRTG was found to be relatively small.

  3. Ballasted photovoltaic module and module arrays

    DOE Patents [OSTI]

    Botkin, Jonathan (El Cerrito, CA); Graves, Simon (Berkeley, CA); Danning, Matt (Oakland, CA)

    2011-11-29T23:59:59.000Z

    A photovoltaic (PV) module assembly including a PV module and a ballast tray. The PV module includes a PV device and a frame. A PV laminate is assembled to the frame, and the frame includes an arm. The ballast tray is adapted for containing ballast and is removably associated with the PV module in a ballasting state where the tray is vertically under the PV laminate and vertically over the arm to impede overt displacement of the PV module. The PV module assembly can be installed to a flat commercial rooftop, with the PV module and the ballast tray both resting upon the rooftop. In some embodiments, the ballasting state includes corresponding surfaces of the arm and the tray being spaced from one another under normal (low or no wind) conditions, such that the frame is not continuously subjected to a weight of the tray.

  4. NEMS integrating module documentation report

    SciTech Connect (OSTI)

    Not Available

    1993-12-14T23:59:59.000Z

    The National Energy Modeling System (NEMS) is a computer modeling system that produces a general equilibrium solution for energy supply and demand in the US energy markets. The model achieves a supply and demand balance in the end-use demand regions, defined as the nine Census Divisions, by solving for the prices of each energy type such that the quantities producers are willing to supply equal the quantities consumers wish to consume. The system reflects market economics, industry structure, and energy policies and regulations that influence market behavior. The NEMS Integrating Module is the central integrating component of a complex modeling system. As such, a thorough understanding of its role in the modeling process can only be achieved by placing it in the proper context with respect to the other modules. To that end, this document provides an overview of the complete NEMS model, and includes brief descriptions of the modules with which the Integrating Module interacts. The emphasis and focus, however, is on the structure and function of the Integrating Module of NEMS.

  5. Redesign of the SNS Modulator H-Bridge for Utilization of Press-Pack IGBTs

    SciTech Connect (OSTI)

    Kemp, Mark A.; Burkhart, Craig; /SLAC; Anderson, David E.; /Oak Ridge

    2008-09-25T23:59:59.000Z

    The power conversion group at SLAC is currently redesigning the H-bridge switch plates of the High Voltage Converter Modulators at the Spallation Neutron Source. This integral part to the modulator operation has been indentified as a source of several modulator faults and potentially limits reliability with pulse width modulation operation. This paper is a presentation of the design and implementation of a redesigned switch plate based upon press-pack IGBTs.

  6. Phenylpropanoid related regulatory protein-regulatory region associations

    DOE Patents [OSTI]

    Apuya, Nestor (Culver City, CA); Bobzin, Steven Craig (Malibu, CA); Park, Joon-Hyun (Oak Park, CA); Doukhanina, Elena (Newbury Park, CA)

    2012-01-03T23:59:59.000Z

    Materials and methods for identifying lignin regulatory region-regulatory protein associations are disclosed. Materials and methods for modulating lignin accumulation are also disclosed.

  7. Module Handbook Specialisation Photovoltaics

    E-Print Network [OSTI]

    Habel, Annegret

    Module Handbook Specialisation Photovoltaics 2nd Semester for the Master Programme REMA/EUREC Course 2008/2009 University of Northumbria Specialisation Provider: Photovoltaics #12;Specialisation Photovoltaics, University of Northumbria Module 1/Photovoltaics: PHOTOVOLTAIC CELL

  8. Modulating lignin in plants

    DOE Patents [OSTI]

    Apuya, Nestor; Bobzin, Steven Craig; Okamuro, Jack; Zhang, Ke

    2013-01-29T23:59:59.000Z

    Materials and methods for modulating (e.g., increasing or decreasing) lignin content in plants are disclosed. For example, nucleic acids encoding lignin-modulating polypeptides are disclosed as well as methods for using such nucleic acids to generate transgenic plants having a modulated lignin content.

  9. Progress on the 140 KV, 10 Megawatt Peak, 1 Megawatt Average Polyphase Quasi-Resonant Bridge, Boost Converter/Modulator for the Spallation Neutron Source (SNS) Klystron Power System

    E-Print Network [OSTI]

    Reass, W A; Gribble, R F; Lynch, M T; Tallerico, P J; Reass, William A.; Doss, James D.; Gribble, Robert F.; Lynch, Michael T.; Tallerico, Paul J.

    2000-01-01T23:59:59.000Z

    This paper describes electrical design and operational characteristics of a zero-voltage-switching 20 kHz polyphase bridge, boost converter/modulator for klystron pulse application. The DC-DC converter derives the buss voltages from a standard 13.8 kV to 2300 Y substation cast-core transformer. Energy storage and filtering is provided by self-clearing metallized hazy polypropylene traction capacitors. Three "H-Bridge" IGBT switching networks are used to generate the polyphase 20 kHz transformers primary drive waveforms. The 20 kHz drive waveforms are chirped the appropriate duration to generate the desired klystron pulse width. PWM (pulse width modulation) of the individual 20 kHz pulses is utilized to provide regulated output waveforms with adaptive feedforward and feedback techniques. The boost transformer design utilizes amorphous nanocrystalline material that provides the required low core loss at design flux levels and switching frequencies. Resonant shunt peaking is used on the transformer secondary to ...

  10. FACULTY OF ENGINEERING MODULE DESCRIPTION FORM

    E-Print Network [OSTI]

    Mottram, Nigel

    Engineering and coastal processes 2. Wave Kinematics; linear wave theory 3. Wave Dynamics; wave transformation: 5 Prerequisites: Water Engineering 2 Module Format and Delivery (hours): Lecture Tutorial in coastal management. Ability to use data sources to assess wave conditions, estimate tidal streams

  11. IMPROVED SPECTRAL RESPONSE OF SILICONE ENCAPSULANTED PHOTOVOLTAIC MODULES

    E-Print Network [OSTI]

    IMPROVED SPECTRAL RESPONSE OF SILICONE ENCAPSULANTED PHOTOVOLTAIC MODULES Nick E. Powell 1* , Byung the benefit of using optically superior silicone encapsulant materials over the incumbent ethylene vinyl in the UV region of the solar spectrum. Single cell mini-modules were prepared using two different

  12. Interface module for transverse energy input to dye laser modules

    DOE Patents [OSTI]

    English, R.E. Jr.; Johnson, S.A.

    1994-10-11T23:59:59.000Z

    An interface module for transverse energy input to dye laser modules is provided particularly for the purpose of delivering enhancing transverse energy beams in the form of illumination bar to the lasing zone of a dye laser device, in particular to a dye laser amplifier. The preferred interface module includes an optical fiber array having a plurality of optical fibers arrayed in a co-planar fashion with their distal ends receiving coherent laser energy from an enhancing laser source, and their proximal ends delivered into a relay structure. The proximal ends of the optical fibers are arrayed so as to be coplanar and to be aimed generally at a common point. The transverse energy beam array delivered from the optical fiber array is acted upon by an optical element array to produce an illumination bar which has a cross section in the form of a elongated rectangle at the position of the lasing window. The illumination bar is selected to have substantially uniform intensity throughout. 5 figs.

  13. Approved Module Information for EE4017, 2014/5 Module Title/Name: Realtime Communication Networks Module Code: EE4017

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Module Code: EE4017 School: Engineering and Applied Science Module Type: Standard Module New Module development #12;Indicative Module Content: Telecommunication systems: Network structures; national & Teaching Rationale: Lectures, tutorials and directed reading. Module Assessment Methods of Assessment

  14. Bracket for photovoltaic modules

    DOE Patents [OSTI]

    Ciasulli, John; Jones, Jason

    2014-06-24T23:59:59.000Z

    Brackets for photovoltaic ("PV") modules are described. In one embodiment, a saddle bracket has a mounting surface to support one or more PV modules over a tube, a gusset coupled to the mounting surface, and a mounting feature coupled to the gusset to couple to the tube. The gusset can have a first leg and a second leg extending at an angle relative to the mounting surface. Saddle brackets can be coupled to a torque tube at predetermined locations. PV modules can be coupled to the saddle brackets. The mounting feature can be coupled to the first gusset and configured to stand the one or more PV modules off the tube.

  15. FASTBUS Snoop Diagnostic Module

    SciTech Connect (OSTI)

    Walz, H.V.; Downing, R.

    1980-11-01T23:59:59.000Z

    Development of the FASTBUS Snoop Module, undertaken as part of the prototype program for the new interlaboratory data bus standard, is described. The Snoop Module resides on a FASTBUS crate segment and provides diagnostic monitoring and testing capability. Communication with a remote host computer is handled independent of FASTBUS through a serial link. The module consists of a high-speed ECL front-end to monitor and single-step FASTBUS cycles, a master-slave interface, and a control microprocessor with serial communication ports. Design details and performance specifications of the prototype module are reported. 9 figures, 1 table.

  16. Repatriation of US sources from Brazil

    SciTech Connect (OSTI)

    Tompkins, Andrew J [Los Alamos National Laboratory

    2008-01-01T23:59:59.000Z

    IAEA's interest in excess and unwanted sealed sources extends back to when radium sources were a problem throughout the world. Sta11ing in 1994, world wide IAEA member states inventoried and consolidated radium (Ra)-226 sources. IAEA then trained Regional Teams in the conditioning of Ra-226 sealed sources for long term storage, which resulted in the Regional Teams conditioning about 14,000 radium sources. These sources remained in their respective IAEA member state locations. Regional teams were seen as a way to encourage member state (local) management of a world wide problem, as well as a more cost effective solution.

  17. Approved Module Information for CE4020, 2014/5 Module Title/Name: Advanced Mass Trasfer Module Code: CE4020

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : CE4020 School: Engineering and Applied Science Module Type: Standard Module New Module? No ModuleApproved Module Information for CE4020, 2014/5 Module Title/Name: Advanced Mass Trasfer Module Code Credits: 10 Module Management Information Module Leader Name Qingchun Yuan Email Address q

  18. Approved Module Information for CS1240, 2014/5 Module Title/Name: Internet Computing Module Code: CS1240

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : CS1240 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module and applications for working with them. Module Learning Outcomes: At the end of the module, students should be ableApproved Module Information for CS1240, 2014/5 Module Title/Name: Internet Computing Module Code

  19. Approved Module Information for LT1307, 2014/5 Module Title/Name: Principles of Economics Module Code: LT1307

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: LT1307 School: Engineering and Applied Science Module Type: Standard Module New Module? No ModuleApproved Module Information for LT1307, 2014/5 Module Title/Name: Principles of Economics Module Credits: 10 Module Management Information Module Leader Name David Carpenter Email Address d

  20. Approved Module Information for ME3039, 2014/5 Module Title/Name: Design Failure Analysis Module Code: ME3039

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: ME3039 School: Engineering and Applied Science Module Type: Standard Module New Module? No ModuleApproved Module Information for ME3039, 2014/5 Module Title/Name: Design Failure Analysis Module Credits: 10 Module Management Information Module Leader Name David Upton Email Address uptondp

  1. Approved Module Information for CS1320, 2014/5 Module Title/Name: Problem Solving Module Code: CS1320

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    1320 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module CreditsApproved Module Information for CS1320, 2014/5 Module Title/Name: Problem Solving Module Code: CS: 10 Module Management Information Module Leader Name Errol Thompson Email Address thompel1@aston

  2. Approved Module Information for LT3315, 2014/5 Module Title/Name: International Trade Law Module Code: LT3315

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: LT3315 School: Engineering and Applied Science Module Type: Standard Module New Module? No ModuleApproved Module Information for LT3315, 2014/5 Module Title/Name: International Trade Law Module Credits: 10 Module Management Information Module Leader Name David Carpenter Email Address d

  3. Approved Module Information for PH4705, 2014/5 Module Title/Name: Interprofessional Learning Module Code: PH4705

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: PH4705 School: Life and Health Sciences Module Type: Standard Module New Module? No ModuleApproved Module Information for PH4705, 2014/5 Module Title/Name: Interprofessional Learning Module Credits: 10 Module Management Information Module Leader Name Fiona Lacey Email Address f

  4. Approved Module Information for CS4810, 2014/5 Module Title/Name: Enterprise Computing Systems Module Code: CS4810

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Module Code: CS4810 School: Engineering and Applied Science Module Type: Standard Module New ModuleApproved Module Information for CS4810, 2014/5 Module Title/Name: Enterprise Computing Systems? No Module Credits: 15 Module Management Information Module Leader Name Albert Hai Zhuge Email Address zhugeh

  5. Membrane module assembly

    DOE Patents [OSTI]

    Kaschemekat, Jurgen (Palo Alto, CA)

    1994-01-01T23:59:59.000Z

    A membrane module assembly adapted to provide a flow path for the incoming feed stream that forces it into prolonged heat-exchanging contact with a heating or cooling mechanism. Membrane separation processes employing the module assembly are also disclosed. The assembly is particularly useful for gas separation or pervaporation.

  6. Module Safety Issues (Presentation)

    SciTech Connect (OSTI)

    Wohlgemuth, J.

    2012-02-01T23:59:59.000Z

    Description of how to make PV modules so that they are less likely to turn into safety hazards. Making modules inherently safer with minimum additional cost is the preferred approach for PV. Safety starts with module design to ensure redundancy within the electrical circuitry to minimize open circuits and proper mounting instructions to prevent installation related ground faults. Module manufacturers must control the raw materials and processes to ensure that that every module is built like those qualified through the safety tests. This is the reason behind the QA task force effort to develop a 'Guideline for PV Module Manufacturing QA'. Periodic accelerated stress testing of production products is critical to validate the safety of the product. Combining safer PV modules with better systems designs is the ultimate goal. This should be especially true for PV arrays on buildings. Use of lower voltage dc circuits - AC modules, DC-DC converters. Use of arc detectors and interrupters to detect arcs and open the circuits to extinguish the arcs.

  7. Membrane module assembly

    DOE Patents [OSTI]

    Kaschemekat, J.

    1994-03-15T23:59:59.000Z

    A membrane module assembly is described which is adapted to provide a flow path for the incoming feed stream that forces it into prolonged heat-exchanging contact with a heating or cooling mechanism. Membrane separation processes employing the module assembly are also disclosed. The assembly is particularly useful for gas separation or pervaporation. 2 figures.

  8. Photovoltaic module and interlocked stack of photovoltaic modules

    SciTech Connect (OSTI)

    Wares, Brian S.

    2014-09-02T23:59:59.000Z

    One embodiment relates to an arrangement of photovoltaic modules configured for transportation. The arrangement includes a plurality of photovoltaic modules, each photovoltaic module including a frame. A plurality of individual male alignment features and a plurality of individual female alignment features are included on each frame. Adjacent photovoltaic modules are interlocked by multiple individual male alignment features on a first module of the adjacent photovoltaic modules fitting into and being surrounded by corresponding individual female alignment features on a second module of the adjacent photovoltaic modules. Other embodiments, features and aspects are also disclosed.

  9. ModuleModuleModuleModule NameNameNameName : Biostatistics Module NumberModule NumberModule NumberModule Number : 210235

    E-Print Network [OSTI]

    for the above types of confidence intervals and tests. Contribution to Program Learning Outcomes). Learning Outcomes:Learning Outcomes:Learning Outcomes:Learning Outcomes: On completing this module, student:Contribution to Program Learning Outcomes:Contribution to Program Learning Outcomes:Contribution to Program Learning

  10. Module No: 410236Environmental protectionModule Title: Introduction to LawPre-requisite

    E-Print Network [OSTI]

    Office Phone Academic rank Instructor Name E-mailOffice Number Office Phone Academic rank Module legal research papers as well as environment related articles. Learning Outcomes (Knowledge-rounded with the methods and paradigms of both; legal academic research as well as the sources of legal knowledge B/1 put

  11. Water heater control module

    DOE Patents [OSTI]

    Hammerstrom, Donald J

    2013-11-26T23:59:59.000Z

    An advanced electric water heater control system that interfaces with a high temperature cut-off thermostat and an upper regulating thermostat. The system includes a control module that is electrically connected to the high-temperature cut-off thermostat and the upper regulating thermostat. The control module includes a switch to open or close the high-temperature cut-off thermostat and the upper regulating thermostat. The control module further includes circuitry configured to control said switch in response to a signal selected from the group of an autonomous signal, a communicated signal, and combinations thereof.

  12. Sonication standard laboratory module

    DOE Patents [OSTI]

    Beugelsdijk, Tony (Los Alamos, NM); Hollen, Robert M. (Los Alamos, NM); Erkkila, Tracy H. (Los Alamos, NM); Bronisz, Lawrence E. (Los Alamos, NM); Roybal, Jeffrey E. (Santa Fe, NM); Clark, Michael Leon (Menan, ID)

    1999-01-01T23:59:59.000Z

    A standard laboratory module for automatically producing a solution of cominants from a soil sample. A sonication tip agitates a solution containing the soil sample in a beaker while a stepper motor rotates the sample. An aspirator tube, connected to a vacuum, draws the upper layer of solution from the beaker through a filter and into another beaker. This beaker can thereafter be removed for analysis of the solution. The standard laboratory module encloses an embedded controller providing process control, status feedback information and maintenance procedures for the equipment and operations within the standard laboratory module.

  13. Approved Module Information for PD1803, 2014/5 Module Title/Name: Engineering Principles Module Code: PD1803

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: PD1803 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module.i.smith@aston.ac.uk Telephone Number 3610 Office MB156C Additional Module Tutor(s): Michael David Peters. David Barry. LevelApproved Module Information for PD1803, 2014/5 Module Title/Name: Engineering Principles Module

  14. Approved Module Information for CH2107, 2014/5 Module Title/Name: Physical Chemistry II Module Code: CH2107

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : CH2107 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module. ----- [Part 2: Physical Chemistry Laboratory]; Building on material from a number of modules in the 1st and 2Approved Module Information for CH2107, 2014/5 Module Title/Name: Physical Chemistry II Module Code

  15. Approved Module Information for EM4003, 2014/5 Module Title/Name: Project Management Module Code: EM4003

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : EM4003 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module. Links to Research: The module will link to the work of the Project and Supply Chain Management ResearchApproved Module Information for EM4003, 2014/5 Module Title/Name: Project Management Module Code

  16. Approved Module Information for LT1312, 2014/5 Module Title/Name: Literature Review Project Module Code: LT1312

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: LT1312 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Rationale: Lectures/tutorials Guided reading according to issue chosen Module Assessment MethodsApproved Module Information for LT1312, 2014/5 Module Title/Name: Literature Review Project Module

  17. Approved Module Information for ME1601, 2014/5 Module Title/Name: Engineering Science Module Code: ME1601

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for ME1601, 2014/5 Module Title/Name: Engineering Science Module Code: ME1601 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module@aston.ac.uk Telephone Number Not Specified Office Not Specified Additional Module Tutor(s): David Smith. Abul Hossain

  18. Approved Module Information for PD2003, 2014/5 Module Title/Name: Engineering Principles 2 Module Code: PD2003

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for PD2003, 2014/5 Module Title/Name: Engineering Principles 2 Module Code: PD2003 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module.i.smith@aston.ac.uk Telephone Number 3610 Office MB156C Additional Module Tutor(s): Michael David Peters. David Barry. Level

  19. Approved Module Information for CS4840, 2014/5 Module Title/Name: Software Architecture Module Code: CS4840

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : CS4840 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module, directed reading, formative assignments, practical project-based work Module Assessment MethodsApproved Module Information for CS4840, 2014/5 Module Title/Name: Software Architecture Module Code

  20. Approved Module Information for ME3011, 2014/5 Module Title/Name: Thermodynamics and Fluids Module Code: ME3011

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: ME3011 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Modules/ Exempt from Anonymous Marking Details Assessment Weight EXAM TOTAL Closed Book 2:00hrs - 80Approved Module Information for ME3011, 2014/5 Module Title/Name: Thermodynamics and Fluids Module

  1. Pulse width modulation inverter with battery charger

    DOE Patents [OSTI]

    Slicker, James M. (Union Lake, MI)

    1985-01-01T23:59:59.000Z

    An inverter is connected between a source of DC power and a three-phase AC induction motor, and a microprocessor-based circuit controls the inverter using pulse width modulation techniques. In the disclosed method of pulse width modulation, both edges of each pulse of a carrier pulse train are equally modulated by a time proportional to sin .theta., where .theta. is the angular displacement of the pulse center at the motor stator frequency from a fixed reference point on the carrier waveform. The carrier waveform frequency is a multiple of the motor stator frequency. The modulated pulse train is then applied to each of the motor phase inputs with respective phase shifts of 120.degree. at the stator frequency. Switching control commands for electronic switches in the inverter are stored in a random access memory (RAM) and the locations of the RAM are successively read out in a cyclic manner, each bit of a given RAM location controlling a respective phase input of the motor. The DC power source preferably comprises rechargeable batteries and all but one of the electronic switches in the inverter can be disabled, the remaining electronic switch being part of a "flyback" DC-DC converter circuit for recharging the battery.

  2. Absorbance modulation optical lithography

    E-Print Network [OSTI]

    Tsai, Hsin-Yu Sidney

    2007-01-01T23:59:59.000Z

    In this thesis, the concept of absorbance-modulation optical lithography (AMOL) is described, and the feasibility experimentally verified. AMOL is an implementation of nodal lithography, which is not bounded by the diffraction ...

  3. GREET Pretreatment Module

    SciTech Connect (OSTI)

    Adom, Felix K.; Dunn, Jennifer B.; Han, Jeongwoo

    2014-09-01T23:59:59.000Z

    A wide range of biofuels and biochemicals can be produced from biomass via different pretreatment technologies that yield sugars. This report documents the material and energy flows that occur when fermentable sugars from four lignocellulosic feedstocks (corn stover, miscanthus, switchgrass, and poplar) are produced via dilute acid pretreatment and ammonia fiber expansion. These flows are documented for inclusion in the pretreatment module of the Greenhouses Gases, Regulated Emissions, and Energy Use in Transportation (GREET) model. Process simulations of each pretreatment technology were developed in Aspen Plus. Material and energy consumption data from Aspen Plus were then compiled in the GREET pretreatment module. The module estimates the cradle-to-gate fossil energy consumption (FEC) and greenhouse gas (GHG) emissions associated with producing fermentable sugars. This report documents the data and methodology used to develop this module and the cradle-to-gate FEC and GHG emissions that result from producing fermentable sugars.

  4. Digital optical conversion module

    DOE Patents [OSTI]

    Kotter, D.K.; Rankin, R.A.

    1988-07-19T23:59:59.000Z

    A digital optical conversion module used to convert an analog signal to a computer compatible digital signal including a voltage-to-frequency converter, frequency offset response circuitry, and an electrical-to-optical converter. Also used in conjunction with the digital optical conversion module is an optical link and an interface at the computer for converting the optical signal back to an electrical signal. Suitable for use in hostile environments having high levels of electromagnetic interference, the conversion module retains high resolution of the analog signal while eliminating the potential for errors due to noise and interference. The module can be used to link analog output scientific equipment such as an electrometer used with a mass spectrometer to a computer. 2 figs.

  5. INEEL Source Water Assessment

    SciTech Connect (OSTI)

    Sehlke, Gerald

    2003-03-01T23:59:59.000Z

    The Idaho National Engineering and Environmental Laboratory (INEEL) covers approximately 890 mi2 and includes 12 public water systems that must be evaluated for Source water protection purposes under the Safe Drinking Water Act. Because of its size and location, six watersheds and five aquifers could potentially affect the INEEL’s drinking water sources. Based on a preliminary evaluation of the available information, it was determined that the Big Lost River, Birch Creek, and Little Lost River Watersheds and the eastern Snake River Plain Aquifer needed to be assessed. These watersheds were delineated using the United States Geologic Survey’s Hydrological Unit scheme. Well capture zones were originally estimated using the RESSQC module of the Environmental Protection Agency’s Well Head Protection Area model, and the initial modeling assumptions and results were checked by running several scenarios using Modflow modeling. After a technical review, the resulting capture zones were expanded to account for the uncertainties associated with changing groundwater flow directions, a thick vadose zone, and other data uncertainties. Finally, all well capture zones at a given facility were merged to a single wellhead protection area at each facility. A contaminant source inventory was conducted, and the results were integrated with the well capture zones, watershed and aquifer information, and facility information using geographic information system technology to complete the INEEL’s Source Water Assessment. Of the INEEL’s 12 public water systems, three systems rated as low susceptibility (EBR-I, Main Gate, and Gun Range), and the remainder rated as moderate susceptibility. No INEEL public water system rated as high susceptibility. We are using this information to develop a source water management plan from which we will subsequently implement an INEEL-wide source water management program. The results are a very robust set of wellhead protection areas that will protect the INEEL’s public water systems yet not too conservative to inhibit the INEEL from carrying out its missions.

  6. Photovoltaic module reliability workshop

    SciTech Connect (OSTI)

    Mrig, L. (ed.)

    1990-01-01T23:59:59.000Z

    The paper and presentations compiled in this volume form the Proceedings of the fourth in a series of Workshops sponsored by Solar Energy Research Institute (SERI/DOE) under the general theme of photovoltaic module reliability during the period 1986--1990. The reliability Photo Voltaic (PV) modules/systems is exceedingly important along with the initial cost and efficiency of modules if the PV technology has to make a major impact in the power generation market, and for it to compete with the conventional electricity producing technologies. The reliability of photovoltaic modules has progressed significantly in the last few years as evidenced by warranties available on commercial modules of as long as 12 years. However, there is still need for substantial research and testing required to improve module field reliability to levels of 30 years or more. Several small groups of researchers are involved in this research, development, and monitoring activity around the world. In the US, PV manufacturers, DOE laboratories, electric utilities and others are engaged in the photovoltaic reliability research and testing. This group of researchers and others interested in this field were brought together under SERI/DOE sponsorship to exchange the technical knowledge and field experience as related to current information in this important field. The papers presented here reflect this effort.

  7. Thermoelectrics Partnership: Automotive Thermoelectric Modules...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Novel Nanostructured Interface Solution for Automotive Thermoelectric Modules Application Thermoelectrics Partnership: Automotive...

  8. Positive modulator of bone morphogenic protein-2

    DOE Patents [OSTI]

    Zamora, Paul O. (Gaithersburg, MD); Pena, Louis A. (Poquott, NY); Lin, Xinhua (Plainview, NY); Takahashi, Kazuyuki (Germantown, MD)

    2009-01-27T23:59:59.000Z

    Compounds of the present invention of formula I and formula II are disclosed in the specification and wherein the compounds are modulators of Bone Morphogenic Protein activity. Compounds are synthetic peptides having a non-growth factor heparin binding region, a linker, and sequences that bind specifically to a receptor for Bone Morphogenic Protein. Uses of compounds of the present invention in the treatment of bone lesions, degenerative joint disease and to enhance bone formation are disclosed.

  9. Modeling and Validation of Performance Limitations for the Optimal Design of Interferometric and Intensity-Modulated Fiber Optic Displacement Sensors

    SciTech Connect (OSTI)

    Moro, Erik A. [Los Alamos National Laboratory

    2012-06-07T23:59:59.000Z

    Optical fiber sensors offer advantages over traditional electromechanical sensors, making them particularly well-suited for certain measurement applications. Generally speaking, optical fiber sensors respond to a desired measurand through modulation of an optical signal's intensity, phase, or wavelength. Practically, non-contacting fiber optic displacement sensors are limited to intensity-modulated and interferometric (or phase-modulated) methodologies. Intensity-modulated fiber optic displacement sensors relate target displacement to a power measurement. The simplest intensity-modulated sensor architectures are not robust to environmental and hardware fluctuations, since such variability may cause changes in the measured power level that falsely indicate target displacement. Differential intensity-modulated sensors have been implemented, offering robustness to such intensity fluctuations, and the speed of these sensors is limited only by the combined speed of the photodetection hardware and the data acquisition system (kHz-MHz). The primary disadvantages of intensity-modulated sensing are the relatively low accuracy (?m-mm for low-power sensors) and the lack of robustness, which consequently must be designed, often with great difficulty, into the sensor's architecture. White light interferometric displacement sensors, on the other hand, offer increased accuracy and robustness. Unlike their monochromatic-interferometer counterparts, white light interferometric sensors offer absolute, unambiguous displacement measurements over large displacement ranges (cm for low-power, 5 mW, sources), necessitating no initial calibration, and requiring no environmental or feedback control. The primary disadvantage of white light interferometric displacement sensors is that their utility in dynamic testing scenarios is limited, both by hardware bandwidth and by their inherent high-sensitivity to Doppler-effects. The decision of whether to use either an intensity-modulated interferometric sensor depends on an appropriate performance function (e.g., desired displacement range, accuracy, robustness, etc.). In this dissertation, the performance limitations of a bundled differential intensity-modulated displacement sensor are analyzed, where the bundling configuration has been designed to optimize performance. The performance limitations of a white light Fabry-Perot displacement sensor are also analyzed. Both these sensors are non-contacting, but they have access to different regions of the performance-space. Further, both these sensors have different degrees of sensitivity to experimental uncertainty. Made in conjunction with careful analysis, the decision of which sensor to deploy need not be an uninformed one.

  10. Rutgers Regional Report # Regional Report

    E-Print Network [OSTI]

    Garfunkel, Eric

    , population, income, and building permits over a 32-year period from 1969 to 2001 for the 31-county Tri counties of the Tri-State (Connecticut, New Jersey, and New York) Region have been divided for analytical the nation and the Tri-State Region. What has not been fully documented, however, is the apparent shift

  11. Light induced modulation instability of surfaces under intense illumination

    SciTech Connect (OSTI)

    Burlakov, V. M., E-mail: burlakov@maths.ox.ac.uk; Goriely, A. [Mathematical Institute, University of Oxford, Woodstock Road, Oxford OX2 6GG (United Kingdom)] [Mathematical Institute, University of Oxford, Woodstock Road, Oxford OX2 6GG (United Kingdom); Foulds, I. [4700 King Abdullah University of Science and Technology, Thuwal 23955-6900 (Saudi Arabia)] [4700 King Abdullah University of Science and Technology, Thuwal 23955-6900 (Saudi Arabia)

    2013-12-16T23:59:59.000Z

    We show that a flat surface of a polymer in rubber state illuminated with intense electromagnetic radiation is unstable with respect to periodic modulation. Initial periodic perturbation is amplified due to periodic thermal expansion of the material heated by radiation. Periodic heating is due to focusing-defocusing effects caused by the initial surface modulation. The surface modulation has a period longer than the excitation wavelength and does not require coherent light source. Therefore, it is not related to the well-known laser induced periodic structures on polymer surfaces but may contribute to their formation and to other phenomena of light-matter interaction.

  12. Microstructure of compositionally modulated InAlAs

    SciTech Connect (OSTI)

    Twesten, R.D.; Millunchick, J.M.; Lee, S.R.; Follstaedt, D.M.; Jones, E.D. [Sandia National Labs., Albuquerque, NM (United States); Ahrenkiel, S.P.; Zhang, Y.; Mascarenhas, A. [National Renewable Energy Lab., Golden, CO (United States)

    1996-12-31T23:59:59.000Z

    The authors have observed spontaneous, lateral composition modulation in tensile InAlAs alloy films grown as short-period superlattices on InP (001). They have analyzed these films using transmission electron microscopy, x-ray reciprocal space mapping, and polarized photoluminescence spectroscopy. They find the growth front is nonplanar, exhibiting {approximately} 2 nm deep cusps aligned with the In-rich regions of the compositionally modulated films. In addition to the measured 15 nm wavelength modulation in the [110] direction, a modulation of 30 nm wavelength is seen in the orthogonal [1{bar 1}0] direction. The photoluminescence from the modulated layer is strongly polarized and red shifted by 0.22 eV.

  13. High current ion source

    DOE Patents [OSTI]

    Brown, Ian G. (1088 Woodside Rd., Berkeley, CA 94708); MacGill, Robert A. (645 Kern St., Richmond, CA 94805); Galvin, James E. (2 Commodore Dr. #276, Emeryville, CA 94608)

    1990-01-01T23:59:59.000Z

    An ion source utilizing a cathode and anode for producing an electric arc therebetween. The arc is sufficient to vaporize a portion of the cathode to form a plasma. The plasma leaves the generation region and expands through another regon. The density profile of the plasma may be flattened using a magnetic field formed within a vacuum chamber. Ions are extracted from the plasma to produce a high current broad on beam.

  14. Method and system using power modulation and velocity modulation producing sputtered thin films with sub-angstrom thickness uniformity or custom thickness gradients

    DOE Patents [OSTI]

    Montcalm, Claude (Livermore, CA); Folta, James Allen (Livermore, CA); Walton, Christopher Charles (Berkeley, CA)

    2003-12-23T23:59:59.000Z

    A method and system for determining a source flux modulation recipe for achieving a selected thickness profile of a film to be deposited (e.g., with highly uniform or highly accurate custom graded thickness) over a flat or curved substrate (such as concave or convex optics) by exposing the substrate to a vapor deposition source operated with time-varying flux distribution as a function of time. Preferably, the source is operated with time-varying power applied thereto during each sweep of the substrate to achieve the time-varying flux distribution as a function of time. Preferably, the method includes the steps of measuring the source flux distribution (using a test piece held stationary while exposed to the source with the source operated at each of a number of different applied power levels), calculating a set of predicted film thickness profiles, each film thickness profile assuming the measured flux distribution and a different one of a set of source flux modulation recipes, and determining from the predicted film thickness profiles a source flux modulation recipe which is adequate to achieve a predetermined thickness profile. Aspects of the invention include a computer-implemented method employing a graphical user interface to facilitate convenient selection of an optimal or nearly optimal source flux modulation recipe to achieve a desired thickness profile on a substrate. The method enables precise modulation of the deposition flux to which a substrate is exposed to provide a desired coating thickness distribution.

  15. Approved Module Information for CE1002, 2014/5 Module Title/Name: Design and Build Module Code: CE1002

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    1002 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Credits@aston.ac.uk Telephone Number 3426 Office MBL25A Additional Module Tutor(s): George Drahun. John Brammer. Yassir Makkawi? Not Specified Module Learning Information Module Aims: To introduce students to: the design process, working

  16. Approved Module Information for EE4024, 2014/5 Module Title/Name: Distributed Network Applications Module Code: EE4024

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Module Code: EE4024 School: Engineering and Applied Science Module Type: Standard Module New Module.a.eberhard@aston.ac.uk Telephone Number Not Specified Office Not Specified Additional Module Tutor(s): John Williams. Level to develop and use structured approaches to problem solving. Indicative Module Content: The module introduces

  17. Approved Module Information for CH3010, 2014/5 Module Title/Name: Catalysis Module Code: CH3010

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for CH3010, 2014/5 Module Title/Name: Catalysis Module Code: CH3010 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Credits: 10 in which available: BSc/MChem Applied Chemistry. BSc/MChem Chemistry. BEng/MEng Chemical Engineering. MEng

  18. Photovoltaic module and interlocked stack of photovoltaic modules

    SciTech Connect (OSTI)

    Wares, Brian S.

    2012-09-04T23:59:59.000Z

    One embodiment relates to an arrangement of photovoltaic modules configured for transportation. The arrangement includes a plurality of photovoltaic modules, each photovoltaic module including a frame having at least a top member and a bottom member. A plurality of alignment features are included on the top member of each frame, and a plurality of alignment features are included on the bottom member of each frame. Adjacent photovoltaic modules are interlocked by the alignment features on the top member of a lower module fitting together with the alignment features on the bottom member of an upper module. Other embodiments, features and aspects are also disclosed.

  19. Energy spectrum control for modulated proton beams

    SciTech Connect (OSTI)

    Hsi, Wen C.; Moyers, Michael F.; Nichiporov, Dmitri; Anferov, Vladimir; Wolanski, Mark; Allgower, Chris E.; Farr, Jonathan B.; Mascia, Anthony E.; Schreuder, Andries N. [Midwest Proton Radiotherapy Institute, Bloomington, Indiana 47408 and University Florida Proton Therapy Institute, Jacksonville, Florida 32206 (United States); Proton Therapy, Inc., Colton, California 92324 (United States); Indiana University Cyclotron Facility, Bloomington, Indiana 47408 (United States); Midwest Proton Radiotherapy Institute, Bloomington, Indiana 47408 and University Florida Proton Therapy Institute, Jacksonville, Florida 32206 (United States); Midwest Proton Radiotherapy Institute, Bloomington, Indiana 47408 (United States); University Florida Proton Therapy Institute, Jacksonville, Florida 32206 (United States) and Westdeutsches Protonentherapiezentrum, Universitaetsklinikum, Hufelandstrasse 55, 45147 Essen (Germany); Midwest Proton Radiotherapy Institute, Bloomington, Indiana 47408 (United States); University Florida Proton Therapy Institute, Jacksonville, Florida 32206 (United States) and ProCure Treatment Centers, Inc., Bloomington, Indiana 47404 (United States)

    2009-06-15T23:59:59.000Z

    In proton therapy delivered with range modulated beams, the energy spectrum of protons entering the delivery nozzle can affect the dose uniformity within the target region and the dose gradient around its periphery. For a cyclotron with a fixed extraction energy, a rangeshifter is used to change the energy but this produces increasing energy spreads for decreasing energies. This study investigated the magnitude of the effects of different energy spreads on dose uniformity and distal edge dose gradient and determined the limits for controlling the incident spectrum. A multilayer Faraday cup (MLFC) was calibrated against depth dose curves measured in water for nonmodulated beams with various incident spectra. Depth dose curves were measured in a water phantom and in a multilayer ionization chamber detector for modulated beams using different incident energy spreads. Some nozzle entrance energy spectra can produce unacceptable dose nonuniformities of up to {+-}21% over the modulated region. For modulated beams and small beam ranges, the width of the distal penumbra can vary by a factor of 2.5. When the energy spread was controlled within the defined limits, the dose nonuniformity was less than {+-}3%. To facilitate understanding of the results, the data were compared to the measured and Monte Carlo calculated data from a variable extraction energy synchrotron which has a narrow spectrum for all energies. Dose uniformity is only maintained within prescription limits when the energy spread is controlled. At low energies, a large spread can be beneficial for extending the energy range at which a single range modulator device can be used. An MLFC can be used as part of a feedback to provide specified energy spreads for different energies.

  20. PSCAD Modules Representing PV Generator

    SciTech Connect (OSTI)

    Muljadi, E.; Singh, M.; Gevorgian, V.

    2013-08-01T23:59:59.000Z

    Photovoltaic power plants (PVPs) have been growing in size, and the installation time is very short. With the cost of photovoltaic (PV) panels dropping in recent years, it can be predicted that in the next 10 years the contribution of PVPs to the total number of renewable energy power plants will grow significantly. In this project, the National Renewable Energy Laboratory (NREL) developed a dynamic modeling of the modules to be used as building blocks to develop simulation models of single PV arrays, expanded to include Maximum Power Point Tracker (MPPT), expanded to include PV inverter, or expanded to cover an entire PVP. The focus of the investigation and complexity of the simulation determines the components that must be included in the simulation. The development of the PV inverter was covered in detail, including the control diagrams. Both the current-regulated voltage source inverter and the current-regulated current source inverter were developed in PSCAD. Various operations of the PV inverters were simulated under normal and abnormal conditions. Symmetrical and unsymmetrical faults were simulated, presented, and discussed. Both the three-phase analysis and the symmetrical component analysis were included to clarify the understanding of unsymmetrical faults. The dynamic model validation was based on the testing data provided by SCE. Testing was conducted at SCE with the focus on the grid interface behavior of the PV inverter under different faults and disturbances. The dynamic model validation covers both the symmetrical and unsymmetrical faults.

  1. Phase modulated multiphoton microscopy

    E-Print Network [OSTI]

    Karki, Khadga Jung; Pullerits, Tonu

    2015-01-01T23:59:59.000Z

    We show that the modulation of the phases of the laser beams of ultra-short pulses leads to modulation of the two photon fluorescence intensity. The phase modulation technique when used in multi-photon microscopy can improve the signal to noise ratio. The technique can also be used in multiplexing the signals in the frequency domain in multi-focal raster scanning microscopy. As the technique avoids the use of array detectors as well as elaborate spatiotemporal multiplexing schemes it provides a convenient means to multi-focal scanning in axial direction. We show examples of such uses. Similar methodology can be used in other non-linear scanning microscopies, such as second or third harmonic generation microscopy.

  2. Power module assembly

    DOE Patents [OSTI]

    Campbell, Jeremy B. (Torrance, CA); Newson, Steve (Redondo Beach, CA)

    2011-11-15T23:59:59.000Z

    A power module assembly of the type suitable for deployment in a vehicular power inverter, wherein the power inverter has a grounded chassis, is provided. The power module assembly comprises a conductive base layer electrically coupled to the chassis, an insulating layer disposed on the conductive base layer, a first conductive node disposed on the insulating layer, a second conductive node disposed on the insulating layer, wherein the first and second conductive nodes are electrically isolated from each other. The power module assembly also comprises a first capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the first conductive node, and further comprises a second capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the second conductive node.

  3. Assessing the drivers of regional trends in solar photovoltaic manufacturing

    E-Print Network [OSTI]

    Goodrich, Alan C.

    The photovoltaic (PV) industry has grown rapidly as a source of energy and economic activity. Since 2008, the average manufacturer-sale price of PV modules has declined by over a factor of two, coinciding with a significant ...

  4. Flexible programmable logic module

    DOE Patents [OSTI]

    Robertson, Perry J. (Albuquerque, NM); Hutchinson, Robert L. (Albuquerque, NM); Pierson, Lyndon G. (Albuquerque, NM)

    2001-01-01T23:59:59.000Z

    The circuit module of this invention is a VME board containing a plurality of programmable logic devices (PLDs), a controlled impedance clock tree, and interconnecting buses. The PLDs are arranged to permit systolic processing of a problem by offering wide data buses and a plurality of processing nodes. The board contains a clock reference and clock distribution tree that can drive each of the PLDs with two critically timed clock references. External clock references can be used to drive additional circuit modules all operating from the same synchronous clock reference.

  5. Method of monolithic module assembly

    DOE Patents [OSTI]

    Gee, James M. (Albuquerque, NM); Garrett, Stephen E. (Albuquerque, NM); Morgan, William P. (Albuquerque, NM); Worobey, Walter (Albuquerque, NM)

    1999-01-01T23:59:59.000Z

    Methods for "monolithic module assembly" which translate many of the advantages of monolithic module construction of thin-film PV modules to wafered c-Si PV modules. Methods employ using back-contact solar cells positioned atop electrically conductive circuit elements affixed to a planar support so that a circuit capable of generating electric power is created. The modules are encapsulated using encapsulant materials such as EVA which are commonly used in photovoltaic module manufacture. The methods of the invention allow multiple cells to be electrically connected in a single encapsulation step rather than by sequential soldering which characterizes the currently used commercial practices.

  6. Wake potentials of the ILC Interaction Region

    SciTech Connect (OSTI)

    Novokhatski, A.; /SLAC

    2011-08-16T23:59:59.000Z

    The vacuum chamber of the ILC Interaction Region (IR) is optimized for best detector performance. It has special shaping to minimize additional backgrounds due to the metal part of the chamber. Also, for the same reason this thin vacuum chamber does not have water cooling. Therefore, small amounts of power, which may be deposited in the chamber, can be enough to raise the chamber to a high temperature. One of the sources of 'heating' power is the electromagnetic field of the beam. This field diffracts by non-regularities of the beam pipe and excites free-propagating fields, which are then absorbed by the pipe wall. In addition we have a heating power of the image currents due to finite conductivity of the metallic wall. We will discuss these effects as updating the previous results. The conclusions of this report are: (1) The amount of the beam energy loss in IR is almost equal to the energy loss in one ILC (TESLA) accelerating cryo-module; (2) Addition energy spread at IR is very small; (3) Spectrum of the wake fields is limited 300 GHz; (4) Average power of the wake fields excited in IR is 30 W for nominal ILC parameters; and (5) Pulse power in this case is 6 kilowatts.

  7. Server Control Module Fulfillsserversignalingfunctionality

    E-Print Network [OSTI]

    Shenoy, Prashant

    CCM CCM CCM SCM SCM GM SGM SGM SGM SGM SGM SGM SGM SGMSGM SGM SGM SGMSGM Input Streams Output Streams Client Requests SCM SCM CCM Stream Requests Server Control Module streamservices GMaltersData Planetoperform requested service GMsends requestfor stream toCCM AMPS Design, Build

  8. Terminal coalgebras via modules

    E-Print Network [OSTI]

    Cheng, Eugenia

    Terminal coalgebras via modules Tom Leinster (Glasgow/EPSRC) Apostolos Matzaris (Patras a terminal coalgebra #12;Plan We'll give a new proof of an old theorem (Bird, Makkai­Par´e, Barr, Ad´amek): every finitary endofunctor of a locally finitely presentable category has a terminal coalgebra #12

  9. Appendix C: Map of NEMS Electricity Market Module Regions

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40CoalLease(Billion CubicPotentialNov-14 Dec-14 Jan-1538,469Appendix E44 Reference4

  10. Inverter power module with distributed support for direct substrate cooling

    DOE Patents [OSTI]

    Miller, David Harold (San Pedro, CA); Korich, Mark D. (Chino Hills, CA); Ward, Terence G. (Redondo Beach, CA); Mann, Brooks S. (Redondo Beach, CA)

    2012-08-21T23:59:59.000Z

    Systems and/or methods are provided for an inverter power module with distributed support for direct substrate cooling. An inverter module comprises a power electronic substrate. A first support frame is adapted to house the power electronic substrate and has a first region adapted to allow direct cooling of the power electronic substrate. A gasket is interposed between the power electronic substrate and the first support frame. The gasket is configured to provide a seal between the first region and the power electronic substrate. A second support frame is adapted to house the power electronic substrate and joined to the first support frame to form the seal.

  11. Northeast Regional Biomass Program

    SciTech Connect (OSTI)

    Lusk, P.D.

    1992-12-01T23:59:59.000Z

    The Northeast Regional Biomass Program has been in operation for a period of nine years. During this time, state managed programs and technical programs have been conducted covering a wide range of activities primarily aim at the use and applications of wood as a fuel. These activities include: assessments of available biomass resources; surveys to determine what industries, businesses, institutions, and utility companies use wood and wood waste for fuel; and workshops, seminars, and demonstrations to provide technical assistance. In the Northeast, an estimated 6.2 million tons of wood are used in the commercial and industrial sector, where 12.5 million cords are used for residential heating annually. Of this useage, 1504.7 mw of power has been generated from biomass. The use of wood energy products has had substantial employment and income benefits in the region. Although wood and woodwaste have received primary emphasis in the regional program, the use of municipal solid waste has received increased emphasis as an energy source. The energy contribution of biomass will increase as potentia users become more familiar with existing feedstocks, technologies, and applications. The Northeast Regional Biomass Program is designed to support region-specific to overcome near-term barriers to biomass energy use.

  12. Module Handbook Specialisation Biomass Energy

    E-Print Network [OSTI]

    Damm, Werner

    Module Handbook Specialisation Biomass Energy 2nd Semester for the Master Programme REMA/EUREC Course 2008/2009 University of Zaragoza Specialisation Provider: Biomass Energy #12;Specialisation Biomass Energy, University of Zaragoza Modul: Introduction and Basic Concepts

  13. Hierarchical classification of modulation signals

    E-Print Network [OSTI]

    Kim, Nam Jin

    2002-01-01T23:59:59.000Z

    This thesis addresses the problem of classifying both analog and digital modulation signals using different kinds of classifiers. The classification of modulation signals has both civilian and military applications. A total of 31 statistical signal...

  14. Alternative Energy Sources - An Interdisciplinary Module for Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The Future of1Albuquerque, NM -Alicia Moulton About UsAll27, 2013Education |

  15. Alternative Energy Sources - An Interdisciplinary Module for Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The Future of1Albuquerque, NM -Alicia Moulton About UsAll27, 2013Education

  16. Alternative Energy Sources -- An Interdisciplinary Module for Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The Future of1Albuquerque, NM -Alicia Moulton About UsAll27,

  17. Collective effects of stellar winds and unidentified gamma-ray sources

    E-Print Network [OSTI]

    Diego F. Torres; Eva Domingo-Santamaria

    2006-11-11T23:59:59.000Z

    We study collective wind configurations produced by a number of massive stars, and obtain densities and expansion velocities of the stellar wind gas that is to be target, in this model, of hadronic interactions. We study the expected $\\gamma$-ray emission from these regions, considering in an approximate way the effect of cosmic ray modulation. We compute secondary particle production (electrons from knock-on interactions and electrons and positrons from charged pion decay), and solve the loss equation with ionization, synchrotron, bremsstrahlung, inverse Compton, and expansion losses. We provide examples where configurations can produce sources for GLAST satellite, and the MAGIC, HESS, or VERITAS telescopes in non-uniform ways, i.e., with or without the corresponding counterparts. We show that in all cases we studied no EGRET source is expected.

  18. An Ultraluminous X-ray Source Powered by An Accreting Neutron Star

    E-Print Network [OSTI]

    Bachetti, M; Walton, D J; Grefenstette, B W; Chakrabarty, D; Fürst, F; Barret, D; Beloborodov, A; Boggs, S E; Christensen, F E; Craig, W W; Fabian, A C; Hailey, C J; Hornschemeier, A; Kaspi, V; Kulkarni, S R; Maccarone, T; Miller, J M; Rana, V; Stern, D; Tendulkar, S P; Tomsick, J; Webb, N A; Zhang, W W

    2014-01-01T23:59:59.000Z

    Ultraluminous X-ray sources (ULX) are off-nuclear point sources in nearby galaxies whose X-ray luminosity exceeds the theoretical maximum for spherical infall (the Eddington limit) onto stellar-mass black holes. Their luminosity ranges from $10^{40}$ erg s$^{-1} $10^{40}$ erg s$^{-1}$), which require black hole masses MBH >50 solar masses and/or significant departures from the standard thin disk accretion that powers bright Galactic X-ray binaries. Here we report broadband X-ray observations of the nuclear region of the galaxy M82, which contains two bright ULXs. The observations reveal pulsations of average period 1.37 s with a 2.5-day sinusoidal modulation. The pulsations result from the rotation of a magnetized neutron star, and the modulation arises from its binary orbit. The pulsed flux alone corresponds to $L_X$(3 - 30 keV) = $4.9 \\times 10^{39}$ erg s$^{-1}$. The pulsating source is spatially coincident with a variable ULX which can reach $L_X$ (0.3 - 10 keV) = $1.8 \\times 10^{40}$ erg s$^{-1}$. This ...

  19. Approved Module Information for CE3102, 2014/5 Module Title/Name: Reaction Engineering Module Code: CE3102

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : CE3102 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module@aston.ac.uk Telephone Number 5211 Office MB122 Additional Module Tutor(s): Feroz Kabir. Level Description: Level 6 Module Aims: Familiarity with a structured approach to the design of chemical reactors using mass

  20. Approved Module Information for BH3328, 2014/5 Module Title/Name: Psychology and Work Module Code: BH3328

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for BH3328, 2014/5 Module Title/Name: Psychology and Work Module Code Module Management Information Module Leader Name Alison Legood Email Address a.legood2@aston.ac.uk Telephone Number 0121 204 3270 Office SW8018 Additional Module Tutor(s): Dhensa-Kahlon. Level Description

  1. Approved Module Information for BH2239, 2014/5 Module Title/Name: Psychology and Work Module Code: BH2239

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for BH2239, 2014/5 Module Title/Name: Psychology and Work Module Code Module Management Information Module Leader Name Alison Legood Email Address a.legood2@aston.ac.uk Telephone Number 0121 204 3270 Office SW8018 Additional Module Tutor(s): Dhensa-Kahlon. Level Description

  2. Approved Module Information for ME2045, 2014/5 Module Title/Name: Solid Mechanics Module Code: ME2045

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    2045 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Credits? Not Specified Module Dependancies Pre-requisites: Engineering Science (ME1601). Co-requisites: None Specified scenarios. Module Learning Outcomes: An ability to identify and simplify real life structural design

  3. Approved Module Information for CS1410, 2014/5 Module Title/Name: Java Program Development Module Code: CS1410

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: CS1410 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module.t.nabney@aston.ac.uk Telephone Number Not Specified Office Not Specified Additional Module Tutor(s): Nelly Bencomo. Level Electronic Engineering and Computer Science. Available to Exchange Students? Not Specified Module

  4. Model documentation coal market module of the National Energy Modeling System

    SciTech Connect (OSTI)

    NONE

    1995-03-01T23:59:59.000Z

    This report documents the approaches used in developing the Annual Energy Outlook 1995 (AEO95). This report catalogues and describes the assumptions, methodology, estimation techniques, and source code of the coal market module`s three submodules. These are the Coal Production Submodule (CPS), the Coal Export Submodule (CES), the Coal Expert Submodule (CES), and the Coal Distribution Submodule (CDS).

  5. Literature Review of the Effects of UV Exposure on PV Modules

    Broader source: Energy.gov [DOE]

    This PowerPoint presentation, originally presented at the NREL 2013 PV Module Reliability Workshop on Feb. 26-27, 2013 in Denver, CO, presents the literature review of the effects of prolonged UV exposure of PV modules, with a particular emphasis on UV exposure testing using artificial light sources, including fluorescent, Xenon, and metal halide lamps.

  6. Axially staggered seed-blanket reactor-fuel-module construction. [LWBR

    DOE Patents [OSTI]

    Cowell, G.K.; DiGuiseppe, C.P.

    1982-10-28T23:59:59.000Z

    A heterogeneous nuclear reactor of the seed-blanket type is provided wherein the fissile (seed) and fertile (blanket) nuclear fuels are segregated axially within each fuel element such that fissile and fertile regions occur in an alternating pattern along the length of the fuel element. Further, different axial stacking patterns are used for the fuel elements of at least two module types such that when modules of different types are positioned adjacent to one another, the fertile regions of the modules are offset or staggered. Thus, when a module of one type is surrounded by modules of the second type the fertile regions thereof will be surrounded on all sides by fissile material. This provides enhanced neutron communication both radially and axially, thereby resulting in greater power oscillation stability than other axial arrangements.

  7. Module isolation devices

    SciTech Connect (OSTI)

    Carolan, Michael Francis; Cooke, John Albert; Buzinski, Michael David

    2010-04-27T23:59:59.000Z

    A gas flow isolation device includes a gas flow isolation valve movable from an opened condition to a closed condition. The module isolation valve in one embodiment includes a rupture disk in flow communication with a flow of gas when the module isolation valve is in an opened condition. The rupture disk ruptures when a predetermined pressure differential occurs across it causing the isolation valve to close. In one embodiment the valve is mechanically linked to the rupture disk to maintain the valve in an opened condition when the rupture disk is intact, and which permits the valve to move into a closed condition when the rupture disk ruptures. In another embodiment a crushable member maintains the valve in an open condition, and the flow of gas passed the valve upon rupturing of the rupture disk compresses the crushable member to close the isolation valve.

  8. MODULE CODE INT3612 MODULE LEVEL 3 MODULE TITLE Law Based Dissertation

    E-Print Network [OSTI]

    Mumby, Peter J.

    1 MODULE CODE INT3612 MODULE LEVEL 3 MODULE TITLE Law Based Dissertation LECTURER(S) Ugochukwu; 1.5 hours English one-to-one tutorials (3x30 minutes over 5 weeks); 2.5 hours dissertation tutorials: Produce a formal dissertation demonstrating the results of an independent project Show competence

  9. Tandem resonator reflectance modulator

    DOE Patents [OSTI]

    Fritz, I.J.; Wendt, J.R.

    1994-09-06T23:59:59.000Z

    A wide band optical modulator is grown on a substrate as tandem Fabry-Perot resonators including three mirrors spaced by two cavities. The absorption of one cavity is changed relative to the absorption of the other cavity by an applied electric field, to cause a change in total reflected light, as light reflecting from the outer mirrors is in phase and light reflecting from the inner mirror is out of phase with light from the outer mirrors. 8 figs.

  10. SYNCHROTRON RADIATION SOURCES

    SciTech Connect (OSTI)

    HULBERT,S.L.; WILLIAMS,G.P.

    1998-07-01T23:59:59.000Z

    Synchrotron radiation is a very bright, broadband, polarized, pulsed source of light extending from the infrared to the x-ray region. It is an extremely important source of Vacuum Ultraviolet radiation. Brightness is defined as flux per unit area per unit solid angle and is normally a more important quantity than flux alone particularly in throughput limited applications which include those in which monochromators are used. It is well known from classical theory of electricity and magnetism that accelerating charges emit electromagnetic radiation. In the case of synchrotron radiation, relativistic electrons are accelerated in a circular orbit and emit electromagnetic radiation in a broad spectral range. The visible portion of this spectrum was first observed on April 24, 1947 at General Electric's Schenectady facility by Floyd Haber, a machinist working with the synchrotron team, although the first theoretical predictions were by Lienard in the latter part of the 1800's. An excellent early history with references was presented by Blewett and a history covering the development of the utilization of synchrotron radiation was presented by Hartman. Synchrotron radiation covers the entire electromagnetic spectrum from the infrared region through the visible, ultraviolet, and into the x-ray region up to energies of many 10's of kilovolts. If the charged particles are of low mass, such as electrons, and if they are traveling relativistically, the emitted radiation is very intense and highly collimated, with opening angles of the order of 1 milliradian. In electron storage rings there are three possible sources of synchrotron radiation; dipole (bending) magnets; wigglers, which act like a sequence of bending magnets with alternating polarities; and undulators, which are also multi-period alternating magnet systems but in which the beam deflections are small resulting in coherent interference of the emitted light.

  11. Large source test stand for H/sup -/(D/sup -/) ion source

    SciTech Connect (OSTI)

    Larson, R.; McKenzie-Wilson, R.

    1981-01-01T23:59:59.000Z

    The Brookhaven National Laboratory Neutral Beam Group has constructed a large source test stand for testing of the various source modules under development. The first objective of the BNL program is to develop a source module capable of delivering 10A of H/sup -/(D/sup -/) at 25 kV operating in the steady state mode with satisfactory gas and power efficiency. The large source test stand contains gas supply and vacuum pumping systems, source cooling systems, magnet power supplies and magnet cooling systems, two arc power supplies rated at 25 kW and 50 kW, a large battery driven power supply and an extractor electrode power supply. Figure 1 is a front view of the vacuum vessel showing the control racks with the 36'' vacuum valves and refrigerated baffles mounted behind. Figure 2 shows the rear view of the vessel with a BNL Mk V magnetron source mounted in the source aperture and also shows the cooled magnet coils. Currently two types of sources are under test: a large magnetron source and a hollow cathode discharge source.

  12. Module No: 420474Criminology and PunishmentModule Title: Co-requisite:Crimes against personsPre-requisite

    E-Print Network [OSTI]

    Office Phone Academic rank Instructor Name E-mailOffice Number Office Phone Academic rank Module as psychological A/6 become abreast with the methods and paradigms of legal academic research and the sources research papers, reports and articles related to Criminology and Punishment in compliance with a scientific

  13. Module No: 420476Crimes Against State SecurityModule Title: Criminal law (general part)Pre-requisite

    E-Print Network [OSTI]

    Office Phone Academic rank Instructor Name E-mailOffice Number Office Phone Academic rank Module applications 3. develop students skills in writing and preparing articles, reports and research papers related and formation, etc.. A/6 become abreast of the methods and paradigms of legal academic research and the sources

  14. Array of planar membrane modules for producing hydrogen

    DOE Patents [OSTI]

    Vencill, Thomas R. (Albuquerque, NM); Chellappa, Anand S. (Albuquerque, NM); Rathod, Shailendra B. (Hillsboro, OR)

    2012-05-08T23:59:59.000Z

    A shared or common environment membrane reactor containing a plurality of planar membrane modules with top and bottom thin foil membranes supported by both an intermediary porous support plate and a central base which has both solid extended members and hollow regions or a hollow region whereby the two sides of the base are in fluid communication. The membrane reactor operates at elevate temperatures for generating hydrogen from hydrogen rich feed fuels.

  15. A Module for Radiation Hydrodynamic Calculations With ZEUS-2D Using Flux-Limited Diffusion

    E-Print Network [OSTI]

    N. J. Turner; J. M. Stone

    2001-02-08T23:59:59.000Z

    A module for the ZEUS-2D code is described which may be used to solve the equations of radiation hydrodynamics to order unity in v/c, in the flux-limited diffusion (FLD) approximation. In this approximation, the tensor Eddington factor f which closes the radiation moment equations is chosen to be an empirical function of radiation energy density. This is easier to implement and faster than full-transport techniques, in which f is computed by solving the transfer equation. However, FLD is less accurate when the flux has a component perpendicular to the gradient in radiation energy density, and in optically thin regions when the radiation field depends strongly on angle. The material component of the fluid is here assumed to be in local thermodynamic equilibrium. The energy equations are operator-split, with transport terms, radiation diffusion term, and other source terms evolved separately. Transport terms are applied using the same consistent transport algorithm as in ZEUS-2D. The radiation diffusion term is updated using an alternating-direction implicit method with convergence checking. Remaining source terms are advanced together implicitly using numerical root-finding. However when absorption opacity is zero, accuracy is improved by treating compression and expansion source terms using time-centered differencing. Results are discussed for test problems including radiation-damped linear waves, radiation fronts propagating in optically-thin media, subcritical and supercritical radiating shocks, and an optically-thick shock in which radiation dominates downstream pressure.

  16. Processing module operating methods, processing modules, and communications systems

    DOE Patents [OSTI]

    McCown, Steven Harvey; Derr, Kurt W.; Moore, Troy

    2014-09-09T23:59:59.000Z

    A processing module operating method includes using a processing module physically connected to a wireless communications device, requesting that the wireless communications device retrieve encrypted code from a web site and receiving the encrypted code from the wireless communications device. The wireless communications device is unable to decrypt the encrypted code. The method further includes using the processing module, decrypting the encrypted code, executing the decrypted code, and preventing the wireless communications device from accessing the decrypted code. Another processing module operating method includes using a processing module physically connected to a host device, executing an application within the processing module, allowing the application to exchange user interaction data communicated using a user interface of the host device with the host device, and allowing the application to use the host device as a communications device for exchanging information with a remote device distinct from the host device.

  17. Phase modulation in RF tag

    DOE Patents [OSTI]

    Carrender, Curtis Lee; Gilbert, Ronald W.

    2007-02-20T23:59:59.000Z

    A radio frequency (RF) communication system employs phase-modulated backscatter signals for RF communication from an RF tag to an interrogator. The interrogator transmits a continuous wave interrogation signal to the RF tag, which based on an information code stored in a memory, phase-modulates the interrogation signal to produce a backscatter response signal that is transmitted back to the interrogator. A phase modulator structure in the RF tag may include a switch coupled between an antenna and a quarter-wavelength stub; and a driver coupled between the memory and a control terminal of the switch. The driver is structured to produce a modulating signal corresponding to the information code, the modulating signal alternately opening and closing the switch to respectively decrease and increase the transmission path taken by the interrogation signal and thereby modulate the phase of the response signal. Alternatively, the phase modulator may include a diode coupled between the antenna and driver. The modulating signal from the driver modulates the capacitance of the diode, which modulates the phase of the response signal reflected by the diode and antenna.

  18. Approved Module Information for EE2SSM, 2014/5 Module Title/Name: Sequential State Machines Module Code: EE2SSM

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: EE2SSM School: Engineering and Applied Science Module Type: Standard Module New Module? No ModuleApproved Module Information for EE2SSM, 2014/5 Module Title/Name: Sequential State Machines Module Credits: 10 Module Management Information Module Leader Name John Williams Email Address willijar

  19. Approved Module Information for CE1007, 2014/5 Module Title/Name: Health, Safety & the Environment Module Code: CE1007

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Module Code: CE1007 School: Engineering and Applied Science Module Type: Standard Module New ModuleApproved Module Information for CE1007, 2014/5 Module Title/Name: Health, Safety & the Environment? No Module Credits: 10 Module Management Information Module Leader Name George Drahun Email Address j

  20. NERSC Modules Software Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |IsLove Your1AllocationsNOVA Portal:Ott2006.jpgEnvironment » Modules

  1. Thermoelectrics Partnership: Automotive Thermoelectric Modules...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ace067goodson2011o.pdf More Documents & Publications Thermoelectrics Partnership: Automotive Thermoelectric Modules with Scalable Thermo- and Electro-Mechanical Interfaces Novel...

  2. Approved Module Information for BN3322, 2014/5 Module Title/Name: International Operations Module Code: BN3322

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    of this module is structured in a manner to make its practical applicability clear to students. Tutorials@aston.ac.uk Telephone Number Not Specified Office Not Specified Additional Module Tutor(s): Christopher Owen. LevelApproved Module Information for BN3322, 2014/5 Module Title/Name: International Operations Module

  3. Approved Module Information for CH1102, 2014/5 Module Title/Name: Organic Chemistry I Module Code: CH1102

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : CH1102 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module of Delivery Learning Hours Lecture: 12 hours Tutorial: 2 hours Lab Session: 16 hours Independent Study: 70 reading, tutorial support, supervised laboratory sessions Module Assessment Methods of Assessment

  4. Approved Module Information for CS3460, 2014/5 Module Title/Name: Enterprise Computing Strategies Module Code: CS3460

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    involving case studies. Tutorials and practical work involving case studies. Module Assessment Methods Module Code: CS3460 School: Engineering and Applied Science Module Type: Standard Module New Module and tutorials,supported by appropriate reading. Lectures and directed reading. Tutorials, and practical work

  5. Approved Module Information for CS2230, 2014/5 Module Title/Name: Operating Systems Module Code: CS2230

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    to ensure students do engage with tutorials. The aim is to help keep the student's work on the module more2230 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Credits appropriate software tools and algorithms to deal with them. Main structural components of an OS

  6. Approved Module Information for CS4830, 2014/5 Module Title/Name: Requirements Engineering Module Code: CS4830

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: CS4830 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module * The structure and application of a requirement engineering process. Relevant tools, techniques and standards coursework and tutorial and guided self study. Module Assessment Methods of Assessment & associated weighting

  7. Approved Module Information for CS2010, 2014/5 Module Title/Name: Group Project Module Code: CS2010

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    School: Engineering and Applied Science Module Type: Project New Module? No Module Credits: 20 Module: BSc Computing Science. Available to Exchange Students? Not Specified Module Dependancies Pre science theory. * Use appropriate tools for the support of effective team-based software engineering

  8. Approved Module Information for BS1163, 2014/5 Module Title/Name: Introduction to Microeconomics Module Code: BS1163

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    , the potential trade-off between an efficient and equitable distribution of resources will be discussed Module Code: BS1163 School: Aston Business School Module Type: Standard Module New Module? No Module to introduce students to threshold concepts in economics and core models used in microeconomic theory

  9. Adding a Learning Module -1 Adding a Learning Module

    E-Print Network [OSTI]

    Cui, Yan

    Items focused on a specific subject that students can navigate at their own pace. For example or No for Enforce Sequential Viewing for the Learning Module. Selecting Yes will require students to view the Learning Module within a Table of Contents, which students can also use to navigate through the Learning

  10. Module title Business Based Dissertation Module code INT3601

    E-Print Network [OSTI]

    Mumby, Peter J.

    Module title Business Based Dissertation Module code INT3601 Academic year(s) 2013/4 Credits 30 for assignment and dissertation writing. The dissertation itself brings together all the skills and knowledge material for study 2. demonstrate skills in data collection and research for writing a dissertation #12

  11. Taught Masters Module Guide LEC Taught Masters Module Guide

    E-Print Network [OSTI]

    Sengun, Mehmet Haluk

    ;MODULE NUMBER: BIOL 405 MODULE TITLE: BIOLOGICAL EFFECTS OF AIR POLLUTION AND CLIMATE CHANGE Number warming, ozone depletion, elevated CO2, tropospheric air pollution) and an in-depth analysis health: impacts, adaptation and mitigation Week 2 Air pollutants: plants as our garbage chutes

  12. Microgrid Policy Review of Selected Major Countries, Regions, and Organizations

    E-Print Network [OSTI]

    Qu, Min

    2014-01-01T23:59:59.000Z

    4.IRED (Integration of Renewable Energy Sources and1.Regional Power Grid with renewable Energy Resourcespdf 2. Spanish Renewable Energy Review http://www.erec.org/

  13. FINAL Western Area Power Administration Desert Southwest Region...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    source materials in Western's DSW region archives and records and at the Arizona State University Library in Phoenix, Arizona. Information concerning the general history of...

  14. Western Area Power Administration, Desert Southwest Region Parker...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    areas, and other water sources that are vital in a region); and X (vii) Tundra, coral reefs, or rain forests.; or X (5) Involve genetically engineered organisms, synthetic...

  15. Development of a hydraulic borehole seismic source

    SciTech Connect (OSTI)

    Cutler, R.P.

    1998-04-01T23:59:59.000Z

    This report describes a 5 year, $10 million Sandia/Industry project to develop an advanced borehole seismic source for use in oil and gas exploration and production. The development Team included Sandia, Chevron, Amoco, Conoco, Exxon, Raytheon, Pelton, and GRI. The seismic source that was developed is a vertically oriented, axial point force, swept frequency, clamped, reaction-mass vibrator design. It was based on an early Chevron prototype, but the new tool incorporates a number of improvements which make it far superior to the original prototype. The system consists of surface control electronics, a special heavy duty fiber optic wireline and draw works, a cablehead, hydraulic motor/pump module, electronics module, clamp, and axial vibrator module. The tool has a peak output of 7,000 lbs force and a useful frequency range of 5 to 800 Hz. It can operate in fluid filled wells with 5.5-inch or larger casing to depths of 20,000 ft and operating temperatures of 170 C. The tool includes fiber optic telemetry, force and phase control, provisions to add seismic receiver arrays below the source for single well imaging, and provisions for adding other vibrator modules to the tool in the future. The project yielded four important deliverables: a complete advanced borehole seismic source system with all associated field equipment; field demonstration surveys funded by industry showing the utility of the system; industrial sources for all of the hardware; and a new service company set up by their industrial partner to provide commercial surveys.

  16. Radiation source with shaped emission

    DOE Patents [OSTI]

    Kubiak, Glenn D.; Sweatt, William C.

    2003-05-13T23:59:59.000Z

    Employing a source of radiation, such as an electric discharge source, that is equipped with a capillary region configured into some predetermined shape, such as an arc or slit, can significantly improve the amount of flux delivered to the lithographic wafers while maintaining high efficiency. The source is particularly suited for photolithography systems that employs a ringfield camera. The invention permits the condenser which delivers critical illumination to the reticle to be simplified from five or more reflective elements to a total of three or four reflective elements thereby increasing condenser efficiency. It maximizes the flux delivered and maintains a high coupling efficiency. This architecture couples EUV radiation from the discharge source into a ring field lithography camera.

  17. agricultural nonpoint source: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Carbon sequestration 1. Introduction Management of agricultural soils affects many inventories of potential non-point pollution source areas and regions with high carbon...

  18. Light modulating device

    DOE Patents [OSTI]

    Rauh, R.D.; Goldner, R.B.

    1989-12-26T23:59:59.000Z

    In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity are disclosed. 1 fig.

  19. Photovoltaic module mounting system

    DOE Patents [OSTI]

    Miros, Robert H. J. (Fairfax, CA); Mittan, Margaret Birmingham (Oakland, CA); Seery, Martin N. (San Rafael, CA); Holland, Rodney H. (Novato, CA)

    2012-04-17T23:59:59.000Z

    A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

  20. Photovoltaic module mounting system

    DOE Patents [OSTI]

    Miros, Robert H. J.; Mittan, Margaret Birmingham; Seery, Martin N; Holland, Rodney H

    2012-09-18T23:59:59.000Z

    A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

  1. Light modulating device

    DOE Patents [OSTI]

    Rauh, R. David (Newton, MA); Goldner, Ronald B. (Lexington, MA)

    1989-01-01T23:59:59.000Z

    In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity.

  2. Argonne's SpEC Module

    ScienceCinema (OSTI)

    Harper, Jason

    2014-06-05T23:59:59.000Z

    Jason Harper, an electrical engineer in Argonne National Laboratory's EV-Smart Grid Interoperability Center, discusses his SpEC Module invention that will enable fast charging of electric vehicles in under 15 minutes. The module has been licensed to BTCPower.

  3. Argonne's SpEC Module

    SciTech Connect (OSTI)

    Harper, Jason

    2014-05-05T23:59:59.000Z

    Jason Harper, an electrical engineer in Argonne National Laboratory's EV-Smart Grid Interoperability Center, discusses his SpEC Module invention that will enable fast charging of electric vehicles in under 15 minutes. The module has been licensed to BTCPower.

  4. Module Handbook Specialisation Wind Energy

    E-Print Network [OSTI]

    Habel, Annegret

    ;Specialisation Wind Energy, NTU Athens, 2nd Semester Module 1/Wind Energy: Wind potential, Aerodynamics & Loading of Wind Turbines Module name: Wind potential, Aerodynamics & Loading of Wind Turbines Section Classes Evaluation of Wind Energy Potential Wind turbine Aerodynamics Static and dynamic Loading of Wind turbines

  5. Problems with packaged sources in foreign countries

    SciTech Connect (OSTI)

    Abeyta, Cristy L [Los Alamos National Laboratory; Matzke, James L [Los Alamos National Laboratory; Zarling, John [Los Alamos National Laboratory; Tompkin, J. Andrew [Los Alamos National Laboratory

    2010-01-01T23:59:59.000Z

    The Global Threat Reduction Initiative's (GTRI) Off-Site Source Recovery Project (OSRP), which is administered by the Los Alamos National Laboratory (LANL), removes excess, unwanted, abandoned, or orphan radioactive sealed sources that pose a potential threat to national security, public health, and safety. In total, GTRI/OSRP has been able to recover more than 25,000 excess and unwanted sealed sources from over 825 sites. In addition to transuranic sources, the GTRI/OSRP mission now includes recovery of beta/gamma emitting sources, which are of concern to both the U.S. government and the International Atomic Energy Agency (IAEA). This paper provides a synopsis of cooperative efforts in foreign countries to remove excess and unwanted sealed sources by discussing three topical areas: (1) The Regional Partnership with the International Atomic Energy Agency; (2) Challenges in repatriating sealed sources; and (3) Options for repatriating sealed sources.

  6. Approved Module Information for AM20PD, 2014/5 Module Title/Name: Probability Distributions Module Code: AM20PD

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: AM20PD School: Engineering and Applied Science Module Type: Standard Module New Module? No Module? Not Specified Module Dependancies Pre-requisites: Transition Mathematics (AM10TM). Statistics and ProbabilityApproved Module Information for AM20PD, 2014/5 Module Title/Name: Probability Distributions Module

  7. Approved Module Information for EE3RSY, 2014/5 Module Title/Name: Radio Systems and Personal

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Communications Systems Module Code: EE3RSY School: Engineering and Applied Science Module Type: Standard ModuleApproved Module Information for EE3RSY, 2014/5 Module Title/Name: Radio Systems and Personal New Module? No Module Credits: 10 Module Management Information Module Leader Name Xiaohong Peng Email

  8. A fourth order [Sigma] [Delta] bandpass modulator

    E-Print Network [OSTI]

    Hsu, Stephanie C

    2009-01-01T23:59:59.000Z

    A fourth order bandpass [Sigma] [Delta] modulator is proposed to digitize signals from a MEMS gyroscope. The modulator samples the amplitude-modulated signal at eight times the carrier frequency and achieves an SNR of 82dB ...

  9. Regional Summary Pacific Region Management Context

    E-Print Network [OSTI]

    , for the Eastern Pacific Ocean, and the Western and Central Pacific Fishery Commission, for the Western PacificRegional Summary Pacific Region Management Context The Pacific Region includes California, Oregon, and Washington. Federal fisheries in this region are managed by the Pacific Fishery Management Council (PFMC

  10. Force Modulator System

    SciTech Connect (OSTI)

    Redmond Clark

    2009-04-30T23:59:59.000Z

    Many metal parts manufacturers use large metal presses to shape sheet metal into finished products like car body parts, jet wing and fuselage surfaces, etc. These metal presses take sheet metal and - with enormous force - reshape the metal into a fully formed part in a manner of seconds. Although highly efficient, the forces involved in forming metal parts also damage the press itself, limit the metals used in part production, slow press operations and, when not properly controlled, cause the manufacture of large volumes of defective metal parts. To date, the metal-forming industry has not been able to develop a metal-holding technology that allows full control of press forces during the part forming process. This is of particular importance in the automotive lightweighting efforts under way in the US automotive manufacturing marketplace. Metalforming Controls Technology Inc. (MC2) has developed a patented press control system called the Force Modulator that has the ability to control these press forces, allowing a breakthrough in stamping process control. The technology includes a series of hydraulic cylinders that provide controlled tonnage at all points in the forming process. At the same time, the unique cylinder design allows for the generation of very high levels of clamping forces (very high tonnages) in very small spaces; a requirement for forming medium and large panels out of HSS and AHSS. Successful production application of these systems testing at multiple stamping operations - including Ford and Chrysler - has validated the capabilities and economic benefits of the system. Although this technology has been adopted in a number of stamping operations, one of the primary barriers to faster adoption and application of this technology in HSS projects is system cost. The cost issue has surfaced because the systems currently in use are built for each individual die as a custom application, thus driving higher tooling costs. This project proposed to better marry the die-specific Force Modulator technology with stamping presses in the form of a press cushion. This system would be designed to operate the binder ring for multiple parts, thus cutting the per-die cost of the technology. This study reports the results of technology field application. This project produced the following conclusions: (1) The Force Modulator system is capable of operating at very high tempos in the stamping environment; (2) The company can generate substantial, controlled holding tonnage (binder ring pressure) necessary to hold high strength steel parts for proper formation during draw operations; (3) A single system can be designed to operate with a family of parts, thus significantly reducing the per-die cost of a FM system; (4) High strength steel parts made with these systems appear to show significant quality improvements; (5) The amounts of steel required to make these parts is typically less than the amounts required with traditional blank-holding technologies; and (6) This technology will aid in the use of higher strength steels in auto and truck production, thus reducing weight and improving fuel efficiency.

  11. Characterizing the thermal efficiency of thermoelectric modules

    E-Print Network [OSTI]

    Phillips, Samuel S

    2009-01-01T23:59:59.000Z

    An experimental setup was designed and utilized to measure the thermoelectric properties as functions of temperature of a commercially available, bismuth telluride thermoelectric module. Thermoelectric modules are solid ...

  12. Module 2: Hydrogen Use | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the inherent advantages and disadvantages of each method fcm02r0.pdf More Documents & Publications Hydrogen Properties Module 5: Fuel Cell Systems Module 4: Fuel Cell Technology...

  13. Lateral electrodeposition of compositionally modulated metal layers

    DOE Patents [OSTI]

    Hearne, Sean J

    2014-03-25T23:59:59.000Z

    A method for making a laterally modulated metallic structure that is compositionally modulated in the lateral direction with respect to a substrate.

  14. HYDROGEN REGIONAL INFRASTRUCTURE PROGRAM

    E-Print Network [OSTI]

    HYDROGEN REGIONAL INFRASTRUCTURE PROGRAM IN PENNSYLVANIA HYDROGEN REGIONAL INFRASTRUCTURE PROGRAM date ­ November 23, 2004 · Contract end date ­ March 31, 2006 #12;Hydrogen Regional Infrastructure Program in Pennsylvania Hydrogen Regional Infrastructure Program in Pennsylvania · Objectives ­ Capture

  15. Photovoltaic module with adhesion promoter

    DOE Patents [OSTI]

    2013-10-08T23:59:59.000Z

    Photovoltaic modules with adhesion promoters and methods for fabricating photovoltaic modules with adhesion promoters are described. A photovoltaic module includes a solar cell including a first surface and a second surface, the second surface including a plurality of interspaced back-side contacts. A first glass layer is coupled to the first surface by a first encapsulating layer. A second glass layer is coupled to the second surface by a second encapsulating layer. At least a portion of the second encapsulating layer is bonded directly to the plurality of interspaced back-side contacts by an adhesion promoter.

  16. Model documentation, Coal Market Module of the National Energy Modeling System

    SciTech Connect (OSTI)

    NONE

    1998-01-01T23:59:59.000Z

    This report documents the objectives and the conceptual and methodological approach used in the development of the National Energy Modeling System`s (NEMS) Coal Market Module (CMM) used to develop the Annual Energy Outlook 1998 (AEO98). This report catalogues and describes the assumptions, methodology, estimation techniques, and source code of CMM`s two submodules. These are the Coal Production Submodule (CPS) and the Coal Distribution Submodule (CDS). CMM provides annual forecasts of prices, production, and consumption of coal for NEMS. In general, the CDS integrates the supply inputs from the CPS to satisfy demands for coal from exogenous demand models. The international area of the CDS forecasts annual world coal trade flows from major supply to major demand regions and provides annual forecasts of US coal exports for input to NEMS. Specifically, the CDS receives minemouth prices produced by the CPS, demand and other exogenous inputs from other NEMS components, and provides delivered coal prices and quantities to the NEMS economic sectors and regions.

  17. Periodic equivalence ratio modulation method and apparatus for controlling combustion instability

    DOE Patents [OSTI]

    Richards, George A. (Morgantown, WV); Janus, Michael C. (Baltimore, MD); Griffith, Richard A. (Morgantown, WV)

    2000-01-01T23:59:59.000Z

    The periodic equivalence ratio modulation (PERM) method and apparatus significantly reduces and/or eliminates unstable conditions within a combustion chamber. The method involves modulating the equivalence ratio for the combustion device, such that the combustion device periodically operates outside of an identified unstable oscillation region. The equivalence ratio is modulated between preselected reference points, according to the shape of the oscillation region and operating parameters of the system. Preferably, the equivalence ratio is modulated from a first stable condition to a second stable condition, and, alternatively, the equivalence ratio is modulated from a stable condition to an unstable condition. The method is further applicable to multi-nozzle combustor designs, whereby individual nozzles are alternately modulated from stable to unstable conditions. Periodic equivalence ratio modulation (PERM) is accomplished by active control involving periodic, low frequency fuel modulation, whereby low frequency fuel pulses are injected into the main fuel delivery. Importantly, the fuel pulses are injected at a rate so as not to affect the desired time-average equivalence ratio for the combustion device.

  18. Phase matching of high order harmonic generation using dynamic phase modulation caused by a non-collinear modulation pulse

    DOE Patents [OSTI]

    Cohen, Oren (Boulder, CO); Kapteyn, Henry C. (Boulder, CO); Mumane, Margaret M. (Boulder, CO)

    2010-02-16T23:59:59.000Z

    Phase matching high harmonic generation (HHG) uses a single, long duration non-collinear modulating pulse intersecting the driving pulse. A femtosecond driving pulse is focused into an HHG medium (such as a noble gas) to cause high-harmonic generation (HHG), for example in the X-ray region of the spectrum, via electrons separating from and recombining with gas atoms. A non-collinear pulse intersects the driving pulse within the gas, and modulates the field seen by the electrons while separated from their atoms. The modulating pulse is low power and long duration, and its frequency and amplitude is chosen to improve HHG phase matching by increasing the areas of constructive interference between the driving pulse and the HHG, relative to the areas of destructive interference.

  19. Approved Module Information for AM20ME, 2014/5 Module Title/Name: Mechanics Module Code: AM20ME

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Credits: 10 ones. 2. Acquire variety of mathematical tools used in applications. 3. Realize general strategy material effectively in both written and oral form. 2. Structure, order and classify materials, information

  20. Approved Module Information for CH3115, 2014/5 Module Title/Name: Inorganic Chemistry III Module Code: CH3115

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: CH3115 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module is provided. The fields of Homogeneous Catalysis and Heterogeneous Catalysis are introduced and basic aspects homogeneous and heterogenous catalytic process), hydroformylation (homogeneous catalysis), ammonia synthesis

  1. Approved Module Information for CS4520, 2014/5 Module Title/Name: Information Security Module Code: CS4520

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for CS4520, 2014/5 Module Title/Name: Information Security Module Code and understanding of the need for and the underlying principles of information security. The module will enable MSc students to take an active role in the design, planning, evaluation and management of secure information

  2. Approved Module Information for CS3190, 2014/5 Module Title/Name: Information Security Module Code: CS3190

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for CS3190, 2014/5 Module Title/Name: Information Security Module Code for and the underlying principles of information security. By introducing students to key information security concepts to the administration, design, development, evaluation and management of secure information systems. Module Learning

  3. Approved Module Information for LT1301, 2014/5 Module Title/Name: Introduction to Logistics Module Code: LT1301

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for LT1301, 2014/5 Module Title/Name: Introduction to Logistics Module in which available: BSc Logistics with Supply Chain Management. BSc Logistics with Purchasing Management. BSc Logistics with Transport Management. Available to Exchange Students? Not Specified Module Learning

  4. Ultrasound-modulated optical tomography 

    E-Print Network [OSTI]

    Nam, Haewon

    2004-09-30T23:59:59.000Z

    Ultrasound-modulated optical tomography is modeled by a linear integral equation and an inverse problem involving a diffusion equation in n spatial dimensions, n=2, 3. Based on measured data, the optical absorption coefficient ?...

  5. SiC Power Module

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    So the heat sink system can be smaller and can operate the module under self-heating conditions in a room-temperature ambient environment. F igure 9.12 illustrates a...

  6. Spatial modulation: theory to practice 

    E-Print Network [OSTI]

    Younis, Abdelhamid

    2014-06-30T23:59:59.000Z

    Spatial modulation (SM) is a transmission technique proposed for multiple–input multiple– output (MIMO) systems, where only one transmit antenna is active at a time, offering an increase in the spectral efficiency equal ...

  7. Message Flow Modulator Final Report

    E-Print Network [OSTI]

    Boyer, Robert Stephen

    operational environment at the Patuxent River Naval Air Test Center with scenarios developed by an independent in testing and demonstrating the flow modulator at the Patuxent River Naval Air Test Center. #12;MESSAGE FLOW

  8. Message Flow Modulator Final Report

    E-Print Network [OSTI]

    Boyer, Robert Stephen

    operational environment at the Patuxent River Naval Air Test Center with scenarios developed by an independent in testing and demonstrating the flow modulator at the Patuxent River Naval Air Test Center. #12; MESSAGE

  9. Photovoltaic Module Qualification Plus Testing

    SciTech Connect (OSTI)

    Kurtz, S.; Wohlgemuth, J.; Kempe, M.; Bosco, N.; Hacke, P.; Jordan, D.; Miller, D. C.; Silverman, T. J.; Phillips, N.; Earnest, T.; Romero, R.

    2013-12-01T23:59:59.000Z

    This report summarizes a set of test methods that are in the midst of being incorporated into IEC 61215 for certification of a module design or other tests that go beyond certification to establish bankability.

  10. Linear source approximation in CASMO5

    SciTech Connect (OSTI)

    Ferrer, R.; Rhodes, J. [Studsvik Scandpower, Inc., 504 Shoup Ave., Idaho Falls, ID 83402 (United States); Smith, K. [Dept. of Nuclear Science and Engineering, Massachusetts Inst. of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139 (United States)

    2012-07-01T23:59:59.000Z

    A Linear Source (LS) approximation has been implemented in the two-dimensional Method of Characteristics (MOC) transport solver in a prototype version of CASMO5. The LS approximation, which relies on the computation of trajectory-based spatial moments over source regions to obtain the linear source expansion coefficients, improves the solution accuracy relative to the 'flat' or constant source approximation. In addition, the LS formulation is capable of treating arbitrarily-shaped source regions and is compatible with standard Coarse-Mesh Finite Difference (CMFD) acceleration. Numerical tests presented in this paper for the C5G7 MOX benchmark show that, for comparable accuracy with respect to the reference solution, the LS approximation can reduce the run time by a factor of four and the memory requirements by a factor often relative to the FS scheme. (authors)

  11. Solar cell module lamination process

    DOE Patents [OSTI]

    Carey, Paul G. (Mountain View, CA); Thompson, Jesse B. (Brentwood, CA); Aceves, Randy C. (Tracy, CA)

    2002-01-01T23:59:59.000Z

    A solar cell module lamination process using fluoropolymers to provide protection from adverse environmental conditions and thus enable more extended use of solar cells, particularly in space applications. A laminate of fluoropolymer material provides a hermetically sealed solar cell module structure that is flexible and very durable. The laminate is virtually chemically inert, highly transmissive in the visible spectrum, dimensionally stable at temperatures up to about 200.degree. C. highly abrasion resistant, and exhibits very little ultra-violet degradation.

  12. Compact magnetic energy storage module

    DOE Patents [OSTI]

    Prueitt, Melvin L. (Los Alamos, NM)

    1994-01-01T23:59:59.000Z

    A superconducting compact magnetic energy storage module in which a plurality of superconducting toroids, each having a toroidally wound superconducting winding inside a poloidally wound superconducting winding, are stacked so that the flow of electricity in each toroidally wound superconducting winding is in a direction opposite from the direction of electrical flow in other contiguous superconducting toroids. This allows for minimal magnetic pollution outside of the module.

  13. Compact magnetic energy storage module

    DOE Patents [OSTI]

    Prueitt, M.L.

    1994-12-20T23:59:59.000Z

    A superconducting compact magnetic energy storage module in which a plurality of superconducting toroids, each having a toroidally wound superconducting winding inside a poloidally wound superconducting winding, are stacked so that the flow of electricity in each toroidally wound superconducting winding is in a direction opposite from the direction of electrical flow in other contiguous superconducting toroids. This allows for minimal magnetic pollution outside of the module. 4 figures.

  14. Wide-range voltage modulation

    SciTech Connect (OSTI)

    Rust, K.R.; Wilson, J.M.

    1992-06-01T23:59:59.000Z

    The Superconducting Super Collider`s Medium Energy Booster Abort (MEBA) kicker modulator will supply a current pulse to the abort magnets which deflect the proton beam from the MEB ring into a designated beam stop. The abort kicker will be used extensively during testing of the Low Energy Booster (LEB) and the MEB rings. When the Collider is in full operation, the MEBA kicker modulator will abort the MEB beam in the event of a malfunction during the filling process. The modulator must generate a 14-{mu}s wide pulse with a rise time of less than 1 {mu}s, including the delay and jitter times. It must also be able to deliver a current pulse to the magnet proportional to the beam energy at any time during ramp-up of the accelerator. Tracking the beam energy, which increases from 12 GeV at injection to 200 GeV at extraction, requires the modulator to operate over a wide range of voltages (4 kV to 80 kV). A vacuum spark gap and a thyratron have been chosen for test and evaluation as candidate switches for the abort modulator. Modulator design, switching time delay, jitter and pre-fire data are presented.

  15. Miniature x-ray source

    DOE Patents [OSTI]

    Trebes, James E. (Livermore, CA); Stone, Gary F. (Livermore, CA); Bell, Perry M. (Tracy, CA); Robinson, Ronald B. (Modesto, CA); Chornenky, Victor I. (Minnetonka, MN)

    2002-01-01T23:59:59.000Z

    A miniature x-ray source capable of producing broad spectrum x-ray emission over a wide range of x-ray energies. The miniature x-ray source comprises a compact vacuum tube assembly containing a cathode, an anode, a high voltage feedthru for delivering high voltage to the anode, a getter for maintaining high vacuum, a connection for an initial vacuum pump down and crimp-off, and a high voltage connection for attaching a compact high voltage cable to the high voltage feedthru. At least a portion of the vacuum tube wall is highly x-ray transparent and made, for example, from boron nitride. The compact size and potential for remote operation allows the x-ray source, for example, to be placed adjacent to a material sample undergoing analysis or in proximity to the region to be treated for medical applications.

  16. Approved Module Information for AM10SP, 2014/5 Module Title/Name: Statistics and Probability Module Code: AM10SP

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for AM10SP, 2014/5 Module Title/Name: Statistics and Probability Module Code: AM10SP School: Engineering and Applied Science Module Type: Standard Module New Module? No Module of probability and statistics. They should be able to: * solve problems concerning elementary probability

  17. Approved Module Information for AM30ME, 2014/5 Module Title/Name: Classical Mechanics Module Code: AM30ME

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : AM30ME School: Engineering and Applied Science Module Type: Standard Module New Module? No Module in both written and oral form. 2. Structure, order and classify materials, information, dataApproved Module Information for AM30ME, 2014/5 Module Title/Name: Classical Mechanics Module Code

  18. Approved Module Information for CH3102, 2014/5 Module Title/Name: Advances in Biomaterials Science Module Code: CH3102

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for CH3102, 2014/5 Module Title/Name: Advances in Biomaterials Science Module Code: CH3102 School: Engineering and Applied Science Module Type: Standard Module New Module of lectures, directed reading and tutorial support Module Assessment Methods of Assessment & associated

  19. Approved Module Information for PH2504, 2014/5 Module Title/Name: Spectroscopic Analysis of Medicines Module Code: PH2504

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    of Medicines Module Code: PH2504 School: Life and Health Sciences Module Type: Standard Module New Module.fraser@aston.ac.uk Telephone Number Not Specified Office Not Specified Additional Module Tutor(s): Darren Flower. Defang Ouyang Module Learning Information Module Aims: To provide the student with a working knowledge

  20. Approved Module Information for EE3SPR, 2014/5 Module Title/Name: Signal Processing Module Code: EE3SPR

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    3SPR School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Analysis (EE2ESA). Co-requisites: None Specified Module Learning Information Module Aims: To provide tutorials, lab sessions, and case studies Module Assessment Methods of Assessment & associated weighting

  1. Approved Module Information for EE1IOW, 2014/5 Module Title/Name: Introduction to Optics and Waves Module Code: EE1IOW

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Module Code: EE1IOW School: Engineering and Applied Science Module Type: Standard Module New Module? Yes@aston.ac.uk Telephone Number 3548 Office Not Specified Additional Module Tutor(s): Igor Khrushchev. Level DescriptionApproved Module Information for EE1IOW, 2014/5 Module Title/Name: Introduction to Optics and Waves

  2. Infrared light sources with semimetal electron injection

    DOE Patents [OSTI]

    Kurtz, Steven R. (Albuquerque, NM); Biefeld, Robert M. (Albuquerque, NM); Allerman, Andrew A. (Albuquerque, NM)

    1999-01-01T23:59:59.000Z

    An infrared light source is disclosed that comprises a layered semiconductor active region having a semimetal region and at least one quantum-well layer. The semimetal region, formed at an interface between a GaAsSb or GalnSb layer and an InAsSb layer, provides electrons and holes to the quantum-well layer to generate infrared light at a predetermined wavelength in the range of 2-6 .mu.m. Embodiments of the invention can be formed as electrically-activated light-emitting diodes (LEDs) or lasers, and as optically-pumped lasers. Since the active region is unipolar, multiple active regions can be stacked to form a broadband or multiple-wavelength infrared light source.

  3. FACULTY OF ENGINEERING MODULE DESCRIPTION FORM

    E-Print Network [OSTI]

    Mottram, Nigel

    Office Jan 2003) #12;Level of Achievement Statement for a JBM Accredited Engineering Module Module CodeFACULTY OF ENGINEERING MODULE DESCRIPTION FORM CODE CL508/906 Site Investigation & Risk Assessment Module Registrar: Dr P Sentenac Taught To (Course): Civil Engineering Other Lecturers Involved: Credit

  4. WILD TWISTOR D-MODULES CLAUDE SABBAH

    E-Print Network [OSTI]

    Sabbah, Claude

    WILD TWISTOR D-MODULES CLAUDE SABBAH Abstract. We propose a definition of (polarized) wild twistor with proper direct images 14 2.5. Integrability 14 3. Polarizable wild twistor D-modules 15 3.1. Wild and regular (polarizable) twistor D-modules 15 3.2. Some properties of wild twistor D-modules 15 4. Local

  5. Apparatus for encapsulating a photovoltaic module

    DOE Patents [OSTI]

    Albright, Scot P. (El Paso, TX); Dugan, Larry M. (Boulder, CO)

    1995-10-24T23:59:59.000Z

    The subject inventions concern various photovoltaic module designs to protect the module from horizontal and vertical impacts and degradation of solar cell efficiency caused by moisture. In one design, a plurality of panel supports that are positioned adjacent to the upper panel in a photovoltaic module absorb vertical forces exerted along an axis perpendicular to the upper panel. Other designs employ layers of glass and tempered glass, respectively, to protect the module from vertical impacts. A plurality of button-shaped channels is used around the edges of the photovoltaic module to absorb forces applied to the module along an axis parallel to the module and direct moisture away from the module that could otherwise penetrate the module and adversely affect the cells within the module. A spacer is employed between the upper and lower panels that has a coefficient of thermal expansion substantially equivalent to the coefficient of thermal expansion of at least one of the panels.

  6. Approved Module Information for CS1260, 2014/5 Module Title/Name: Mathematics for Computing

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Professionals Module Code: CS1260 School: Engineering and Applied Science Module Type: Standard Module New working with information systems and the ability to find and use new skills when they need them. Module Hours: 100 hours Learning & Teaching Rationale: Lectures/Tutorials Module Assessment Methods

  7. Approved Module Information for CS1150, 2014/5 Module Title/Name: Academic & Professional

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    & Teaching Rationale: Instructional and tutorial classes; practical work Module Assessment Methods Communication Skills Module Code: CS1150 School: Engineering and Applied Science Module Type: Standard Module Email Address burdenc@aston.ac.uk Telephone Number Not Specified Office NW817 Additional Module Tutor

  8. Approved Module Information for LE3025, 2014/5 Module Title/Name: Leadership & Management

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Communication: 2 Module Code: LE3025 School: Languages and Social Sciences Module Type: Standard Module New-oriented communication, research, and publication; apply the knowledge to the production of spoken and written texts both & Management Communication: 1 (LE3024). Co-requisites: None Specified Module Learning Information Module Aims

  9. Approved Module Information for EE3DDT, 2014/5 Module Title/Name: Digital Transmissions and

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for EE3DDT, 2014/5 Module Title/Name: Digital Transmissions and Communication Systems Module Code: EE3DDT School: Engineering and Applied Science Module Type: Standard Module

  10. DEVELOPMENT OF NEW MID-INFRARED ULTRAFAST LASER SOURCES FOR COMPACT COHERENT X-RAY SOURCES

    SciTech Connect (OSTI)

    Sterling Backus

    2012-05-14T23:59:59.000Z

    In this project, we proposed to develop laser based mid-infrared lasers as a potentially robust and reliable source of ultrafast pulses in the mid-infrared region of the spectrum, and to apply this light source to generating bright, coherent, femtosecond-to-attosecond x-ray beams.

  11. Clusters of Extragalactic Ultra Compact HII Regions

    E-Print Network [OSTI]

    Kelsey E. Johnson; Chip Kobulnicky; Phil Massey; Peter Conti

    2001-07-10T23:59:59.000Z

    We report on the detection of optically thick free-free radio sources in the galaxies M33, NGC 253, and NGC 6946 using data in the literature. We interpret these sources as being young, embedded star birth regions, which are likely to be clusters of ultracompact HII regions. All 35 of the sources presented in this article have positive radio spectral indices alpha>0 suggesting an optically thick thermal bremsstrahlung emission arising in the HII region surrounding hot stars. Energy requirements indicate a range of a several to >500 O7V star equivalents powering each HII region. Assuming a Salpeter IMF, this corresponds to integrated stellar masses of 0.1--60,000 Msun. For roughly half of the sources in our sample, there is no obvious optical counterpart, giving further support for their deeply embedded nature. Their luminosities and radio spectral energy distributions are consistent with HII regions having electron densities from 1500 cm^-3 to 15000 cm^-3 and radii of 1 - 7 pc. We suggest that the less luminous of these sources are extragalactic ultracompact HII region complexes, those of intermediate luminosity are similar to W49 in the Galaxy, while the brightest will be counterparts to 30 Doradus. These objects constitute the lower mass range of extragalactic ``ultradense HII regions'' which we argue are the youngest stages of massive star cluster formation yet observed. This sample is beginning to fill in the continuum of objects between small associations of ultracompact HII regions and the massive extragalactic clusters that may evolve into globular clusters.

  12. Photovoltaic module kit including connector assembly for non-penetrating array installation

    DOE Patents [OSTI]

    Botkin, Jonathan (El Cerrito, CA); Graves, Simon (Berkeley, CA); Danning, Matt (Oakland, CA); Culligan, Matthew (Berkeley, CA)

    2011-11-22T23:59:59.000Z

    A PV module kit for non-penetrating rooftop installation, including a plurality of PV modules and a plurality of connectors. Each of the PV modules includes a PV laminate and a frame forming a mounting region assembled thereto. The connectors include a male connector having a male fastener extending from a head, and a female connector having a female fastener assembled within a head. The heads are entirely formed of plastic. The kit provides a mounted array state including a junction at which the mounting region of at least two of the PV modules are aligned and interconnected by engagement of the male connector with the female connector. The so-formed junction is substantially electrically insulated. The plurality of connectors can further include a spacer connector including a head forming a bore sized to slidably receive the male fastener, with all of the connector heads being identical.

  13. Photovoltaic module kit including connector assembly for non-penetrating array installation

    DOE Patents [OSTI]

    Botkin, Jonathan; Graves, Simon; Danning, Matt; Culligan, Matthew

    2012-10-23T23:59:59.000Z

    A PV module kit for non-penetrating rooftop installation, including a plurality of PV modules and a plurality of connectors. Each of the PV modules includes a PV laminate and a frame forming a mounting region assembled thereto. The connectors include a male connector having a male fastener extending from a head, and a female connector having a female fastener assembled within a head. The heads are entirely formed of plastic. The kit provides a mounted array state including a junction at which the mounting region of at least two of the PV modules are aligned and interconnected by engagement of the male connector with the female connector. The so-formed junction is substantially electrically insulated. The plurality of connectors can further include a spacer connector including a head forming a bore sized to slidably receive the male fastener, with all of the connector heads being identical.

  14. Photovoltaic module kit including connector assembly for non-penetrating array installation

    DOE Patents [OSTI]

    Botkin, Jonathan; Graves, Simon; Danning, Matt; Culligan, Matthew

    2013-12-31T23:59:59.000Z

    A PV module kit for non-penetrating rooftop installation, including a plurality of PV modules and a plurality of connectors. Each of the PV modules includes a PV laminate and a frame forming a mounting region assembled thereto. The connectors include a male connector having a male fastener extending from a head, and a female connector having a female fastener assempbled within a head. The heads are entirely formed of plastic. The kit provides a mounted array state including a junction at which the mounting regions of at least two of the PV modules are aligned and interconnected by engagement of the male connector with the female connector. The so-formed junction is substantially electrically insulated. The plurality of connectors can further include a spacer connector including a head forming a bore sized slidably receive the male fastener, with all of the connector heads being identical.

  15. LOOKING FOR A PULSE: A SEARCH FOR ROTATIONALLY MODULATED RADIO EMISSION FROM THE HOT JUPITER, {tau} BOOeTIS b

    SciTech Connect (OSTI)

    Hallinan, G.; Bourke, S. [Cahill Center for Astrophysics, California Institute of Technology, 1200 E. California Blvd., MC 249-17, Pasadena, CA 91125 (United States)] [Cahill Center for Astrophysics, California Institute of Technology, 1200 E. California Blvd., MC 249-17, Pasadena, CA 91125 (United States); Sirothia, S. K.; Ishwara-Chandra, C. H. [National Centre for Radio Astrophysics, TIFR, Post Bag 3, Pune University Campus, Pune 411007 (India)] [National Centre for Radio Astrophysics, TIFR, Post Bag 3, Pune University Campus, Pune 411007 (India); Antonova, A. [Department of Astronomy, St. Kliment Ohridski University of Sofia, 5 James Bourchier Blvd., 1164 Sofia (Bulgaria)] [Department of Astronomy, St. Kliment Ohridski University of Sofia, 5 James Bourchier Blvd., 1164 Sofia (Bulgaria); Doyle, J. G. [Armagh Observatory, College Hill, Armagh BT61 9DG (United Kingdom)] [Armagh Observatory, College Hill, Armagh BT61 9DG (United Kingdom); Hartman, J. [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States)] [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States); Golden, A. [Department of Genetics, Albert Einstein College of Medicine, Bronx, NY 10461 (United States)] [Department of Genetics, Albert Einstein College of Medicine, Bronx, NY 10461 (United States)

    2013-01-01T23:59:59.000Z

    Hot Jupiters have been proposed as a likely population of low-frequency radio sources due to electron cyclotron maser emission of similar nature to that detected from the auroral regions of magnetized solar system planets. Such emission will likely be confined to specific ranges of orbital/rotational phase due to a narrowly beamed radiation pattern. We report on GMRT 150 MHz radio observations of the hot Jupiter {tau} Booetis b, consisting of 40 hr carefully scheduled to maximize coverage of the planet's 79.5 hr orbital/rotational period in an effort to detect such rotationally modulated emission. The resulting image is the deepest yet published at these frequencies and leads to a 3{sigma} upper limit on the flux density from the planet of 1.2 mJy, two orders of magnitude lower than predictions derived from scaling laws based on solar system planetary radio emission. This represents the most stringent upper limits for both quiescent and rotationally modulated radio emission from a hot Jupiter yet achieved and suggests that either (1) the magnetic dipole moment of {tau} Booetis b is insufficient to generate the surface field strengths of >50 G required for detection at 150 MHz or (2) Earth lies outside the beaming pattern of the radio emission from the planet.

  16. Electrolytes for power sources

    DOE Patents [OSTI]

    Doddapaneni, N.; Ingersoll, D.

    1995-01-03T23:59:59.000Z

    Electrolytes are disclosed for power sources, particularly alkaline and acidic power sources, comprising benzene polysulfonic acids and benzene polyphosphonic acids or salts of such acids. 7 figures.

  17. Electrolytes for power sources

    DOE Patents [OSTI]

    Doddapaneni, Narayan (Albuquerque, NM); Ingersoll, David (Albuquerque, NM)

    1995-01-01T23:59:59.000Z

    Electrolytes for power sources, particularly alkaline and acidic power sources, comprising benzene polysulfonic acids and benzene polyphosphonic acids or salts of such acids.

  18. Northwest Regional Technology Center

    E-Print Network [OSTI]

    Northwest Regional Technology Center for Homeland Security The Northwest Regional Technology Center and deployment of technologies that are effective homeland security solutions for the region, and accelerate technology transfer to the national user community. Foster a collaborative spirit across agencies

  19. Evolution of laser-produced Sn extreme ultraviolet source diameter for high-brightness source

    SciTech Connect (OSTI)

    Roy, Amitava, E-mail: roy@fzu.cz, E-mail: aroy@barc.gov.in [Department of Advanced Interdisciplinary Sciences, Center for Optical Research and Education (CORE), Utsunomiya University, Utsunomiya, Tochigi 321-8585 (Japan); HiLASE Centre, Institute of Physics ASCR, v.v.i., Za Radnicí 828, 25241 Dolní B?ežany (Czech Republic); Arai, Goki; Hara, Hiroyuki; Higashiguchi, Takeshi, E-mail: higashi@cc.utsunomiya-u.ac.jp [Department of Advanced Interdisciplinary Sciences, Center for Optical Research and Education (CORE), Utsunomiya University, Utsunomiya, Tochigi 321-8585 (Japan); Ohashi, Hayato [Graduate School of Science and Engineering for Research, University of Toyama, Toyama, Toyama 930-8555 (Japan); Sunahara, Atsushi [Institute for Laser Technology, 2-6 Yamada-oka, Suita, Osaka 565-0871 (Japan); Li, Bowen [School of Nuclear Science and Technology, Lanzhou University, Lanzhou 730000 (China); School of Physics, University College Dublin, Belfield, Dublin 4 (Ireland); Dunne, Padraig; O'Sullivan, Gerry [School of Physics, University College Dublin, Belfield, Dublin 4 (Ireland); Miura, Taisuke; Mocek, Tomas; Endo, Akira [HiLASE Centre, Institute of Physics ASCR, v.v.i., Za Radnicí 828, 25241 Dolní B?ežany (Czech Republic)

    2014-08-18T23:59:59.000Z

    We have investigated the effect of irradiation of solid Sn targets with laser pulses of sub-ns duration and sub-mJ energy on the diameter of the extreme ultraviolet (EUV) emitting region and source conversion efficiency. It was found that an in-band EUV source diameter as low as 18??m was produced due to the short scale length of a plasma produced by a sub-ns laser. Most of the EUV emission occurs in a narrow region with a plasma density close to the critical density value. Such EUV sources are suitable for high brightness and high repetition rate metrology applications.

  20. Chapter 2: Sources and Deposition of Trace Metals 2.1 Main Sources of Atmospheric Pollution...............................................7

    E-Print Network [OSTI]

    Short, Daniel

    5 Chapter 2: Sources and Deposition of Trace Metals 2.1 Main Sources of Atmospheric Pollution distances causing regional or global pollution. Fig. 2.1: Sources of trace metals in the environment. Contamination of the atmosphere by pollutant trace metals affects the environment directly through its impact

  1. Fast quantum dot single photon source triggered at telecommunications wavelength

    E-Print Network [OSTI]

    Kelley Rivoire; Sonia Buckley; Arka Majumdar; Hyochul Kim; Pierre Petroff; Jelena Vuckovic

    2010-12-20T23:59:59.000Z

    We demonstrate a quantum dot single photon source at 900 nm triggered at 300 MHz by a continuous wave telecommunications wavelength laser followed by an electro-optic modulator. The quantum dot is excited by on-chip-generated second harmonic radiation, resonantly enhanced by a GaAs photonic crystal cavity surrounding the InAs quantum dot. Our result suggests a path toward the realization of telecommunications-wavelength-compatible quantum dot single photon sources with speeds exceeding 1 GHz.

  2. Solid-state membrane module

    DOE Patents [OSTI]

    Gordon, John Howard (Salt Lake City, UT); Taylor, Dale M. (Murray, UT)

    2011-06-07T23:59:59.000Z

    Solid-state membrane modules comprising at least one membrane unit, where the membrane unit has a dense mixed conducting oxide layer, and at least one conduit or manifold wherein the conduit or manifold comprises a dense layer and at least one of a porous layer and a slotted layer contiguous with the dense layer. The solid-state membrane modules may be used to carry out a variety of processes including the separating of any ionizable component from a feedstream wherein such ionizable component is capable of being transported through a dense mixed conducting oxide layer of the membrane units making up the membrane modules. For ease of construction, the membrane units may be planar.

  3. Progress of MICE RFCC Module

    SciTech Connect (OSTI)

    Li, D.; Bowring, D.; DeMello, A.; Gourlay, S.; Green, M.; Li, N.; Niinikoski, T.; Pan, H.; Prestemon, S.; Virostek, S.; Zisman, M.; Bross, A.; Carcagno, R.; Kashikhin, V.; Sylvester, C.; Chen, A.B.; Guo, Bin; Li, Liyi; Xu, Fengyu; Cao, Y.; Sun, S.; Wang, Li; Yin, Lixin; Luo, Tianhuan; Summers, Don; Smith, B.; Radovinsky, A.; Zhukovsky, A.; Kaplan, D.

    2012-05-20T23:59:59.000Z

    Recent progress on the design and fabrication of the RFCC (RF and superconducting Coupling Coil) module for the international MICE (Muon Ionization Cooling Experiment) are reported. The MICE ionization cooling channel has two RFCC modules, each having four 201- MHz normal conducting RF cavities surrounded by one superconducting coupling coil (solenoid) magnet. The magnet is designed to be cooled by three cryocoolers. Fabrication of the RF cavities is complete; preparation for the cavity electro-polishing, low power RF measurements, and tuning are in progress at Lawrence Berkeley National Laboratory (LBNL). Fabrication of the cold mass of the first coupling coil magnet has been completed in China and the cold mass arrived at LBNL in late 2011. Preparations for testing the cold mass are currently under way at Fermilab. Plans for the RFCC module assembly and integration are being developed and are described.

  4. Active combustion flow modulation valve

    DOE Patents [OSTI]

    Hensel, John Peter; Black, Nathaniel; Thorton, Jimmy Dean; Vipperman, Jeffrey Stuart; Lambeth, David N; Clark, William W

    2013-09-24T23:59:59.000Z

    A flow modulation valve has a slidably translating hollow armature with at least one energizable coil wound around and fixably attached to the hollow armature. The energizable coil or coils are influenced by at least one permanent magnet surrounding the hollow armature and supported by an outer casing. Lorentz forces on the energizable coils which are translated to the hollow armature, increase or decrease the flow area to provide flow throttling action. The extent of hollow armature translation depends on the value of current supplied and the direction of translation depends on the direction of current flow. The compact nature of the flow modulation valve combined with the high forces afforded by the actuator design provide a flow modulation valve which is highly responsive to high-rate input control signals.

  5. Electrical isolation of component cells in monolithically interconnected modules

    SciTech Connect (OSTI)

    Wanlass, Mark W. (Golden, CO)

    2001-01-01T23:59:59.000Z

    A monolithically interconnected photovoltaic module having cells which are electrically connected which comprises a substrate, a plurality of cells formed over the substrate, each cell including a primary absorber layer having a light receiving surface and a p-region, formed with a p-type dopant, and an n-region formed with an n-type dopant adjacent the p-region to form a single pn-junction, and a cell isolation diode layer having a p-region, formed with a p-type dopant, and an n-region formed with an n-type dopant adjacent the p-region to form a single pn-junction, the diode layer intervening the substrate and the absorber layer wherein the absorber and diode interfacial regions of a same conductivity type orientation, the diode layer having a reverse-breakdown voltage sufficient to prevent inter-cell shunting, and each cell electrically isolated from adjacent cells with a vertical trench trough the pn-junction of the diode layer, interconnects disposed in the trenches contacting the absorber regions of adjacent cells which are doped an opposite conductivity type, and electrical contacts.

  6. An Efficient RF Source for Jlab

    SciTech Connect (OSTI)

    Neubauer, M. [Muons, Inc.; Dudas, A. [Muons, Inc.; Rimmer, Robert A. [JLAB; Wang, Haipeng [JLAB

    2013-12-01T23:59:59.000Z

    We propose the development of a highly reliable high efficiency RF source for JLAB with a lower lifetime cost operating at 80% efficiency with system operating costs of about 0.7M$/year for the 6 GeV machine. The design of the RF source will be based upon two injection locked magnetrons in a novel combining architecture for amplitude modulation and a cross field amplifier (CFA) as an output tube for the 12 GeV upgrade. A cost analysis including efficiency and reliability will be performed to determine the optimum system architecture. Several different system architectures will be designed and evaluated for a dual injection locked magnetron source using novel combining techniques and possibly a CFA as the output tube. A paper design for the 1497 MHz magnetron system will be completed. The optimum system architecture with all relevant specifications will be completed so that a prototype can be built.

  7. Programmable Multi-Chip Module

    SciTech Connect (OSTI)

    Kautz, David (Lenexa, KS); Morgenstern, Howard (Lee's Summit, MO); Blazek, Roy J. (Overland Park, KS)

    2005-05-24T23:59:59.000Z

    A multi-chip module comprising a low-temperature co-fired ceramic substrate having a first side on which are mounted active components and a second side on which are mounted passive components, wherein this segregation of components allows for hermetically sealing the active components with a cover while leaving accessible the passive components, and wherein the passive components are secured using a reflow soldering technique and are removable and replaceable so as to make the multi-chip module substantially programmable with regard to the passive components.

  8. Programmable multi-chip module

    SciTech Connect (OSTI)

    Kautz, David; Morgenstern, Howard; Blazek, Roy J.

    2004-03-02T23:59:59.000Z

    A multi-chip module comprising a low-temperature co-fired ceramic substrate having a first side on which are mounted active components and a second side on which are mounted passive components, wherein this segregation of components allows for hermetically sealing the active components with a cover while leaving accessible the passive components, and wherein the passive components are secured using a reflow soldering technique and are removable and replaceable so as to make the multi-chip module substantially programmable with regard to the passive components.

  9. Programmable Multi-Chip Module

    DOE Patents [OSTI]

    Kautz, David (Lenexa, KS); Morgenstern, Howard (Lee's Summit, MO); Blazek, Roy J. (Overland Park, KS)

    2004-11-16T23:59:59.000Z

    A multi-chip module comprising a low-temperature co-fired ceramic substrate having a first side on which are mounted active components and a second side on which are mounted passive components, wherein this segregation of components allows for hermetically sealing the active components with a cover while leaving accessible the passive components, and wherein the passive components are secured using a reflow soldering technique and are removable and replaceable so as to make the multi-chip module substantially programmable with regard to the passive components.

  10. Module title Financial Management Module code INT3605

    E-Print Network [OSTI]

    Mumby, Peter J.

    accounting in monitoring, controlling and planning an organisation's activities. You will develop: Module-specific skills 1. demonstrate understanding of internal management accounts and a company for application in future work place situations #12;ILO: Discipline-specific skills 3. analyse critically

  11. Module No: 410121Introduction to Commercial Module Title

    E-Print Network [OSTI]

    Lecture Time Programme of Study: Daytime & Evening Study E-mailOffice Number Office Phone Academic rank Instructor Name E-mailOffice Number Office Phone Academic rank Module coordinator 306209LecturerMs. Manal procedures and specialization 5. develop students capacity to write articles, reports and research papers

  12. Module No: 410336Personal Statutes for Non-Module Title

    E-Print Network [OSTI]

    Study E-mailOffice Number Office Phone Academic rank Instructor Name E-mailOffice Number Office Phone Academic rank Module coordinator 307384Assistant Professor Dr. Fuad Sartawi ResearchTutorial Guidance, etc... 3. develop students skills in writing research papers, articles and reports about subjects

  13. BROOKHAVEN NATIONAL Sealed Source

    E-Print Network [OSTI]

    Homes, Christopher C.

    BROOKHAVEN NATIONAL LABORATORY Sealed Source Contamination Incident October 13, 2011 #12;2 Cesium (Cs-137) Source Failure On September 28th @ ~1600 contamination event discovered · Two Radiological Contamination was from a Cs-137 (265 micro-curie) "sealed source" used to test area radiation monitors. · Source

  14. Approved Module Information for AM10AS, 2014/5 Module Title/Name: Academic Writing and Study Skills Module Code: AM10AS

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : Instructional and tutorial classes; practical work Module Assessment Methods of Assessment & associated Module Code: AM10AS School: Engineering and Applied Science Module Type: Standard Module New Module@aston.ac.uk Telephone Number Not Specified Office NW817 Additional Module Tutor(s): Emily Waibel. Level Description

  15. Approved Module Information for CS2160, 2014/5 Module Title/Name: Professional Aspects of Computing Module Code: CS2160

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Module Code: CS2160 School: Engineering and Applied Science Module Type: Standard Module New Module and tutorials Additional directed reading on specific case studies Module Assessment Methods of Assessment the module. December/January Exam Closed Book 2:00hrs - 80% Details - #12;Total: 100% Method of Submission

  16. Approved Module Information for AM20MM, 2014/5 Module Title/Name: Mathematical Methods Module Code: AM20MM

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : AM20MM School: Engineering and Applied Science Module Type: Standard Module New Module? No Module students with the necessary basic mathematical tools required in more advanced modules to solve standard of science and engineering. #12;Module Learning Outcomes: Knowledge and Understanding 1. Review and reinforce

  17. Approved Module Information for AM30CA, 2014/5 Module Title/Name: Complex Analysis Module Code: AM30CA

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    30CA School: Engineering and Applied Science Module Type: Standard Module New Module? No Module@aston.ac.uk Telephone Number Not Specified Office Not Specified Additional Module Tutor(s): . Level Description: Level 6/subject-specific skills - Analytical Skills. Indicative Module Content: Algebraic structure of the complex numbers

  18. Approved Module Information for EC102C, 2014/5 Module Title/Name: Construction Technology Module Code: EC102C

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: EC102C School: Engineering and Applied Science Module Type: Standard Module New Module? No Module@aston.ac.uk Telephone Number Not Specified Office Not Specified Additional Module Tutor(s): Gayan Wedawatta. Level Assessment Rationale: Assessment is designed to meet module learning outcomes. The material covered by the 2

  19. Approved Module Information for AM30CD, 2014/5 Module Title/Name: Chaos and Dynamical Systems Module Code: AM30CD

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Module Code: AM30CD School: Engineering and Applied Science Module Type: Standard Module New Module Module Aims: The aims of AM30CD are to provide the necessary mathematical tools to support the study hours Total Learning Hours: 100 hours Learning & Teaching Rationale: Lectures/Tutorials Module

  20. Approved Module Information for AM20LM, 2014/5 Module Title/Name: Linear Mathematics Module Code: AM20LM

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : AM20LM School: Engineering and Applied Science Module Type: Standard Module New Module? No Module this module, students will consolidate their ability to work with vectors and vector spaces, and be familiar: Lectures and Tutorials Module Assessment Methods of Assessment & associated weighting (including approaches

  1. Approved Module Information for AM30PD, 2014/5 Module Title/Name: Partial Differential Equations Module Code: AM30PD

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Module Code: AM30PD School: Engineering and Applied Science Module Type: Standard Module New Module@aston.ac.uk Telephone Number Not Specified Office Not Specified Additional Module Tutor(s): W Cox. Level Description: Lectures/Tutorials Module Assessment Methods of Assessment & associated weighting (including approaches

  2. Module 7: Fuel Cell Bus Maintenance | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    principles of conventional service procedures fcm07r0.pdf More Documents & Publications Module 5: Fuel Cell Systems Module 6: Fuel Cell Engine Safety Module 2: Hydrogen Use...

  3. High Heat Flux Thermoelectric Module Using Standard Bulk Material...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Heat Flux Thermoelectric Module Using Standard Bulk Material High Heat Flux Thermoelectric Module Using Standard Bulk Material Presents high heat flux thermoelectric module design...

  4. Compact, maintainable 80-KeV neutral beam module

    DOE Patents [OSTI]

    Fink, Joel H. (Livermore, CA); Molvik, Arthur W. (Livermore, CA)

    1980-01-01T23:59:59.000Z

    A compact, maintainable 80-keV arc chamber, extractor module for a neutral beam system immersed in a vacuum of <10.sup.-2 Torr, incorporating a nested 60-keV gradient shield located midway between the high voltage ion source and surrounding grounded frame. The shield reduces breakdown or arcing path length without increasing the voltage gradient, tends to keep electric fields normal to conducting surfaces rather than skewed and reduces the peak electric field around irregularities on the 80-keV electrodes. The arc chamber or ion source is mounted separately from the extractor or ion accelerator to reduce misalignment of the accelerator and to permit separate maintenance to be performed on these systems. The separate mounting of the ion source provides for maintaining same without removing the ion accelerator.

  5. Titel des Moduls: Elektrische Energiesysteme

    E-Print Network [OSTI]

    Wichmann, Felix

    , Drehfeld, Asynchronmaschine, Synchronmaschine, Schutz elektrischer Anlagen und Netze. 3. ModulbestandteileTitel des Moduls: Elektrische Energiesysteme LP (ECTS): 6 Kurzbezeichnung: B-ET-EA-EE.W12 elektrischer Energiesysteme und sind in der Lage, Messungen an realen Systemen durchzuführen und ihre

  6. Titel des Moduls: Elektrische Netzwerke

    E-Print Network [OSTI]

    Wichmann, Felix

    Titel des Moduls: Elektrische Netzwerke LP (ECTS): 6 Kurzbezeichnung: BET-GL-ENW. W12 Netz- werkschaltungen beherrschen. Hierbei werden statische Vorgänge mit Gleich- und Wechselsignalen) Semester (WiSe / SoSe) Elektrische Netzwerke VL 2 6 P SoSeUE 1 PR 1 4. Beschreibung der Lehr- und

  7. BA War & Society Module Information

    E-Print Network [OSTI]

    Harman, Neal.A.

    BA War & Society Module Information 2014-2015 www.swansea.ac.uk/artsandhumanities Arts Studies BA War & Society BA War & Society The scope and scale of the BA (Hons) War and Society degree Theories of War 1 (compulsory) HUA102 War and Warfare in the Modern World (compulsory) HIH118 World History

  8. Approved Module Information for ME1600, 2014/5 Module Title/Name: Electronic Engineering Foundations Module Code: ME1600

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for ME1600, 2014/5 Module Title/Name: Electronic Engineering is to provide an introduction to electronic circuits and electronic engineering and develop the experimental * Enhanced information gathering skills for electronic engineering #12;Indicative Module Content: *Part 1 DC

  9. Approved Module Information for CS2150, 2014/5 Module Title/Name: Computer Graphics Module Code: CS2150

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for CS2150, 2014/5 Module Title/Name: Computer Graphics Module Code: CS in 3D computer graphics, both the theory and mathematics that underpin it, and a practical knowledge components required for 3D graphics. * Sufficient knowledge of the mathematics and theory to understand how

  10. Approved Module Information for CE2105, 2014/5 Module Title/Name: Process Simulation Module Code: CE2105

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    the program to processes in chemicals manufacturing, power generation and petrochemical refiningApproved Module Information for CE2105, 2014/5 Module Title/Name: Process Simulation Module Code * Familiarity with the widely used process flowsheeting program AspenPlus. * The opportunity to apply

  11. Ion transport membrane module and vessel system with directed internal gas flow

    DOE Patents [OSTI]

    Holmes, Michael Jerome (Thompson, ND); Ohrn, Theodore R. (Alliance, OH); Chen, Christopher Ming-Poh (Allentown, PA)

    2010-02-09T23:59:59.000Z

    An ion transport membrane system comprising (a) a pressure vessel having an interior, an inlet adapted to introduce gas into the interior of the vessel, an outlet adapted to withdraw gas from the interior of the vessel, and an axis; (b) a plurality of planar ion transport membrane modules disposed in the interior of the pressure vessel and arranged in series, each membrane module comprising mixed metal oxide ceramic material and having an interior region and an exterior region; and (c) one or more gas flow control partitions disposed in the interior of the pressure vessel and adapted to change a direction of gas flow within the vessel.

  12. SOURCE PHENOMENOLOGY EXPERIMENTS IN ARIZONA

    SciTech Connect (OSTI)

    Jessie L. Bonner; Brian Stump; Mark Leidig; Heather Hooper; Xiaoning (David) Yang; Rongmao Zhou; Tae Sung Kim; William R. Walter; Aaron Velasco; Chris Hayward; Diane Baker; C. L. Edwards; Steven Harder; Travis Glenn; Cleat Zeiler; James Britton; James F. Lewkowicz

    2005-09-30T23:59:59.000Z

    The Arizona Source Phenomenology Experiments (SPE) have resulted in an important dataset for the nuclear monitoring community. The 19 dedicated single-fired explosions and multiple delay-fired mining explosions were recorded by one of the most densely instrumented accelerometer and seismometer arrays ever fielded, and the data have already proven useful in quantifying confinement and excitation effects for the sources. It is very interesting to note that we have observed differences in the phenomenology of these two series of explosions resulting from the differences between the relatively slow (limestone) and fast (granodiorite) media. We observed differences at the two SPE sites in the way the rock failed during the explosions, how the S-waves were generated, and the amplitude behavior as a function of confinement. Our consortium's goal is to use the synergy of the multiple datasets collected during this experiment to unravel the phenomenological differences between the two emplacement media. The data suggest that the main difference between single-fired chemical and delay-fired mining explosion seismograms at regional distances is the increased surface wave energy for the latter source type. The effect of the delay-firing is to decrease the high-frequency P-wave amplitudes while increasing the surface wave energy because of the longer source duration and spall components. The results suggest that the single-fired explosions are surrogates for nuclear explosions in higher frequency bands (e.g., 6-8 Hz Pg/Lg discriminants). We have shown that the SPE shots, together with the mining explosions, are efficient sources of S-wave energy, and our next research stage is to postulate the possible sources contributing to the shear-wave energy.

  13. Southwest Region Experiment Station - Final Technical Report

    SciTech Connect (OSTI)

    Rosenthal, A

    2011-08-19T23:59:59.000Z

    Southwest Technology Development Institute (SWTDI), an independent, university-based research institute, has been the operator of the Southwest Region Photovoltaic Experiment Station (SWRES) for almost 30 years. The overarching mission of SWTDI is to position PV systems and solar technologies to become cost-effective, major sources of energy for the United States. Embedded in SWTDI's general mission has been the more-focused mission of the SWRES: to provide value added technical support to the DOE Solar Energy Technologies Program (SETP) to effectively and efficiently meet the R&D needs and targets specified in the SETP Multi-Year Technical Plan. : The DOE/SETP goals of growing U.S. PV manufacturing into giga-watt capacities and seeing tera-watt-hours of solar energy production in the U.S. require an infrastructure that is under development. The staff of the SWRES has supported DOE/SETP through a coherent, integrated program to address infrastructural needs inhibiting wide-scale PV deployment in three major technical categories: specialized engineering services, workforce development, and deployment facilitation. The SWRES contract underwent three major revisions during its five year period-of- performance, but all tasks and deliverables fell within the following task areas: Task 1: PV Systems Assistance Center 1. Develop a Comprehensive multi-year plan 2. Provide technical workforce development materials and workshops for PV stakeholder groups including university, professional installers, inspectors, state energy offices, Federal agencies 3. Serve on the NABCEP exam committee 4. Provide on-demand technical PV system design reviews for U.S. PV stakeholders 5. Provide PV system field testing and instrumentation, technical outreach (including extensive support for the DOE Market Transformation program) Task 2: Design-for-Manufacture PV Systems 1. Develop and install 18 kW parking carport (cost share) and PV-thermal carport (Albuquerque) deriving and publishing lessons learned Task 3: PV Codes and Standards 1. Serve as the national lead for development and preparation of all proposals (related to PV) to the National Electrical Code 2. Participate in the Standards Technical Panels for modules (UL1703) and inverters (UL1741) Task 4: Assess Inverter Long Term Reliability 1. Install and monitor identical inverters at SWRES and SERES 2. Operate and monitor all inverters for 5 years, characterizing all failures and performance trends Task 5: Test and Evaluation Support for Solar America Initiative 1. Provide test and evaluation services to the National Laboratories for stage gate and progress measurements of SAI TPP winners

  14. PV module mounting method and mounting assembly

    DOE Patents [OSTI]

    Lenox, Carl J.S.; Johnson, Kurt M.

    2013-04-23T23:59:59.000Z

    A method for mounting PV modules to a deck includes selecting PV module layout pattern so that adjacent PV module edges are spaced apart. PV mounting and support assemblies are secured to the deck according to the layout pattern using fasteners extending into the deck. The PV modules are placed on the PV mounting and support assemblies. Retaining elements are located over and secured against the upper peripheral edge surfaces of the PV modules so to secure them to the deck with the peripheral edges of the PV modules spaced apart from the deck. In some examples a PV module mounting assembly, for use on a shingled deck, comprises flashing, a base mountable on the flashing, a deck-penetrating fastener engageable with the base and securable to the deck so to secure the flashing and the base to the shingled deck, and PV module mounting hardware securable to the base.

  15. Mounting support for a photovoltaic module

    DOE Patents [OSTI]

    Brandt, Gregory Michael; Barsun, Stephan K.; Coleman, Nathaniel T.; Zhou, Yin

    2013-03-26T23:59:59.000Z

    A mounting support for a photovoltaic module is described. The mounting support includes a foundation having an integrated wire-way ledge portion. A photovoltaic module support mechanism is coupled with the foundation.

  16. Reliability Issues for Photovoltaic Modules (Presentation)

    SciTech Connect (OSTI)

    Kurtz, S.

    2009-10-01T23:59:59.000Z

    Si modules good in field; new designs need reliability testing. CdTe & CIGS modules sensitive to moisture; carefully seal. CPV in product development stage; benefits from expertise in other industries.

  17. Development of ultra-broadband modulators

    E-Print Network [OSTI]

    Shamir, Orit A

    2008-01-01T23:59:59.000Z

    Optical signal modulation is a cornerstone of communication, allowing the transfer of information by electrically encoding data onto an optical carrier. Modulation with ultra-broadband capability enables the generation of ...

  18. Electrical system for pulse-width modulated control of a power inverter using phase-shifted carrier signals and related operating methods

    DOE Patents [OSTI]

    Welchko, Brian A. (Torrance, CA)

    2012-02-14T23:59:59.000Z

    Systems and methods are provided for pulse-width modulated control of power inverter using phase-shifted carrier signals. An electrical system comprises an energy source and a motor. The motor has a first set of windings and a second set of windings, which are electrically isolated from each other. An inverter module is coupled between the energy source and the motor and comprises a first set of phase legs coupled to the first set of windings and a second set of phase legs coupled to the second set of windings. A controller is coupled to the inverter module and is configured to achieve a desired power flow between the energy source and the motor by modulating the first set of phase legs using a first carrier signal and modulating the second set of phase legs using a second carrier signal. The second carrier signal is phase-shifted relative to the first carrier signal.

  19. Southeast Regional Carbon Sequestration Partnership

    SciTech Connect (OSTI)

    Kenneth J. Nemeth

    2006-08-30T23:59:59.000Z

    The Southeast Regional Carbon Sequestration Partnership's (SECARB) Phase I program focused on promoting the development of a framework and infrastructure necessary for the validation and commercial deployment of carbon sequestration technologies. The SECARB program, and its subsequent phases, directly support the Global Climate Change Initiative's goal of reducing greenhouse gas intensity by 18 percent by the year 2012. Work during the project's two-year period was conducted within a ''Task Responsibility Matrix''. The SECARB team was successful in accomplishing its tasks to define the geographic boundaries of the region; characterize the region; identify and address issues for technology deployment; develop public involvement and education mechanisms; identify the most promising capture, sequestration, and transport options; and prepare action plans for implementation and technology validation activity. Milestones accomplished during Phase I of the project are listed below: (1) Completed preliminary identification of geographic boundaries for the study (FY04, Quarter 1); (2) Completed initial inventory of major sources and sinks for the region (FY04, Quarter 2); (3) Completed initial development of plans for GIS (FY04, Quarter 3); (4) Completed preliminary action plan and assessment for overcoming public perception issues (FY04, Quarter 4); (5) Assessed safety, regulatory and permitting issues (FY05, Quarter 1); (6) Finalized inventory of major sources/sinks and refined GIS algorithms (FY05, Quarter 2); (7) Refined public involvement and education mechanisms in support of technology development options (FY05, Quarter 3); and (8) Identified the most promising capture, sequestration and transport options and prepared action plans (FY05, Quarter 4).

  20. Design of a Marx-Topology Modulator for FNAL Linac

    E-Print Network [OSTI]

    Butler, T A; Kufer, M R; Pfeffer, H; Wolff, D

    2015-01-01T23:59:59.000Z

    The Fermilab Proton Improvement Plan (PIP) was formed in late 2011 to address important and necessary upgrades to the Proton Source machines (Injector line, Linac and Booster). The goal is to increase the proton flux by doubling the Booster beam cycle rate while maintaining the same intensity per cycle, the same uptime, and the same residual activation in the enclosure. For the Linac, the main focus within PIP is to address reliability. One of the main tasks is to replace the present hard-tube modulator used on the 200 MHz RF system. Plans to replace this high power system with a Marx-topology modulator, capable of providing the required waveform shaping to stabilize the accelerating gradient and compensate for beam loading, will be presented, along with development data from the prototype unit.

  1. Traces on Module Categories over Fusion Categories

    E-Print Network [OSTI]

    Gregor Schaumann

    2015-01-27T23:59:59.000Z

    We consider traces on module categories over pivotal fusion categories which are compatible with the module structure. It is shown that such module traces characterise the Morita classes of special haploid symmetric Frobenius algebras. Moreover, they are unique up to a scale factor and they equip the dual category with a pivotal structure. This implies that for each pivotal structure on a fusion category over the complex numbers there exists a conjugate pivotal structure defined by the canonical module trace.

  2. Pressure vs. decibel modulation in spectrotemporal representations

    E-Print Network [OSTI]

    Simon, Jonathan Z.

    by the inverse-repeat method) relative to the that of the linearized response. Nominal Stimulus Modulation-Inverted

  3. Charge exchange molecular ion source

    DOE Patents [OSTI]

    Vella, Michael C.

    2003-06-03T23:59:59.000Z

    Ions, particularly molecular ions with multiple dopant nucleons per ion, are produced by charge exchange. An ion source contains a minimum of two regions separated by a physical barrier and utilizes charge exchange to enhance production of a desired ion species. The essential elements are a plasma chamber for production of ions of a first species, a physical separator, and a charge transfer chamber where ions of the first species from the plasma chamber undergo charge exchange or transfer with the reactant atom or molecules to produce ions of a second species. Molecular ions may be produced which are useful for ion implantation.

  4. A Stability of LCLS Linac Modulators

    SciTech Connect (OSTI)

    Decker, F.-J.; Krasnykh, A.; Morris, B.; Nguyen, M.; /SLAC

    2012-06-13T23:59:59.000Z

    Information concerning to a stability of LCLS RF linac modulators is allocated in this paper. In general a 'pulse-to-pulse' modulator stability (and RF phase as well) is acceptable for the LCLS commission and FEL programs. Further modulator stability improvements are possible and approaches are discussed based on our experimental results.

  5. FACULTY OF ENGINEERING MODULE DESCRIPTION FORM

    E-Print Network [OSTI]

    Mottram, Nigel

    Level: NQF 3 Prerequisites: none Module Format and Delivery (hours): Lecture Tutorial Assignments Visits visualisation). Uncovering the role of science and mathematics in the design of structures using case studyFACULTY OF ENGINEERING MODULE DESCRIPTION FORM CL 112 Introduction to Civil Engineering Module Code

  6. Neurofibromin Regulation of ERK Signaling Modulates

    E-Print Network [OSTI]

    Silva, Alcino

    Neurofibromin Regulation of ERK Signaling Modulates GABA Release and Learning Yijun Cui,1 Rui M@mednet.ucla.edu DOI 10.1016/j.cell.2008.09.060 SUMMARY We uncovered a role for ERK signaling in GABA re- lease, long demonstrate that neurofibromin modulates ERK/synapsin I-dependent GABA re- lease, which in turn modulates

  7. Lossless intensity modulation in integrated photonics

    E-Print Network [OSTI]

    Fan, Shanhui

    volume silicon mi- croring modulator," Opt. Express 18, 18235­18242 (2010). 12. A. Yariv, "Critical modulators," Nat. Photonics 4, 518­526 (2010). 2. A. Liu, R. Jones, L. Liao, D. Samara-Rubio1, D. Rubin, O. Cohen, R. Nicolaescu, and M. Paniccia, "A high-speed silicon optical modulator based on a metal

  8. MODULES OVER A PID KEITH CONRAD

    E-Print Network [OSTI]

    Lozano-Robledo, Alvaro

    MODULES OVER A PID KEITH CONRAD Every vector space over a field K that has a finite spanning set modules have bases. But when A is a PID, we get something nearly as good as that: (1) Every submodule a PID sits inside the free module. Then we'll learn how to count with ideals in place of positive

  9. Emittance growth from electron beam modulation

    SciTech Connect (OSTI)

    Blaskiewicz, M.

    2009-12-01T23:59:59.000Z

    In linac ring colliders like MeRHIC and eRHIC a modulation of the electron bunch can lead to a modulation of the beam beam tune shift and steering errors. These modulations can lead to emittance growth. This note presents simple formulas to estimate these effects which generalize some previous results.

  10. Analysis of Saturn kilometric radiation near a source center J. D. Menietti,1

    E-Print Network [OSTI]

    Gurnett, Donald A.

    reported source region encounter and with similar observations at Earth auroral kilometric source regions is believed to be the cyclotron maser instability (CMI) [Wu and Lee, 1979]. The free energy source has more distribu- tions with energies in the range 1 to 10 keV [Delory et al., 1998; Su et al., 2007]. The CMI

  11. Draft: Module handbook PhD Program in Experimental Medicine Code Module Coordinator ECTS

    E-Print Network [OSTI]

    Tübingen, Universität

    1 Draft: Module handbook PhD Program in Experimental Medicine Code Module Coordinator ECTS Module Elements Ges. Compulsory Modules: PEX-01 Research in Experimental Medicine Pichler 5 PEX-02 Ph - Intermediate reports PEX-03 Progress report and/or Journal club (in students department) Supervisor in dept. 3

  12. Approved Module Information for PH3704, 2014/5 Module Title/Name: Quality Assured Pharmaceutical

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    and processes, including the use of Standard Operating Procedures, Good Laboratory Practice, Good Pharmaceutical Technology Module Code: PH3704 School: Life and Health Sciences Module Type: Standard Module New Module of these materials. · To describe the role of quality assurance in the maintenance of the quality of pharmaceutical

  13. Approved Module Information for PH2507, 2014/5 Module Title/Name: Professional, Workplace & Scientific

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Email Address flowerdr@aston.ac.uk Telephone Number 5182 Office Not Specified Additional Module Tutor

  14. Oil and Gas Supply Module

    Gasoline and Diesel Fuel Update (EIA)

    and sources. Crude oil recovery includes improved oil recovery processes such as water flooding, infill drilling, and horizontal drilling, as well as enhanced oil recovery...

  15. Oil and Gas Supply Module

    Gasoline and Diesel Fuel Update (EIA)

    and sources. Crude oil recovery includes improved oil recovery processes such as water flooding, infill drilling, and horizontal continuity, as well as enhanced oil recovery...

  16. Degradation Pathway Models for Photovoltaics Module Lifetime Performance

    E-Print Network [OSTI]

    Rollins, Andrew M.

    Degradation Pathway Models for Photovoltaics Module Lifetime Performance Nicholas R. Wheeler, Laura data from Underwriter Labs, featuring measurements taken on 18 identical photovoltaic (PV) modules in modules and their effects on module performance over lifetime. Index Terms--photovoltaics, statistical

  17. Module Encapsulant Diagnostic and Modeling

    SciTech Connect (OSTI)

    Kempe, M.

    2005-01-01T23:59:59.000Z

    Encapsulant materials are used in photovoltaic devices for mechanical support, electrical isolation, and protection against corrosion. The ability of an encapsulant to protect against surface corrosion is related to its adhesional strength. The adhesion of candidate encapsulants under accelerated environmental stress was examined to determine what materials have the best hydrolytic stability and are more likely to reduce corrosion rates. Under environmental exposure, the ingress of water has been correlated with increased corrosion rates. The diffusivity of different encapsulants has been measured to determine how long it takes for water to enter a module. The high diffusivity of ethylene vinyl acetate indicates that, even with the use of an impermeable back-sheet, moisture from the sides will diffuse throughout the entire module. To significantly reduce moisture ingress requires a true hermetic seal, the use of an encapsulant loaded with desiccant, or the use of a very low diffusivity encapsulant.

  18. SITN Regional Outreach Map

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Region States in Region Awardee(s) Location of Awardee(s) Contact(s) Northeast (Photovoltaics) CT * ME * MA * NH NY * RI * VT Hudson Valley Community College Troy, NY Richard...

  19. The polyphase resonant converter modulator for pulse power and plasma applications

    SciTech Connect (OSTI)

    Reass, W. A. (William A.); Baca, D. M. (David M.); Doss, James D.; Gribble, R. (Robert F.); North, W. R.

    2002-01-01T23:59:59.000Z

    This paper describes a new technique to generate high voltage pulses (100 kV and up) with high peak power (10 MW and up) and high average power (1 MW and up) from a low voltage input source (e.g. +/- 1.2 kV). This technology is presently being used to provide cathode pulse modulation for the Spallation Neutron Source (SNS) accelerator klystron RF amplifiers, which operate to 140 kV 11 MW peak power and 1.1 MW average power. The design of the modulator, referred to as the Polyphase Resonant Converter-Modulator takes advantage of high-power component advances, in response to the needs of the traction motor industry (in particular, railroad locomotives), such as Insulated Gate Bipolar Transistors (IGBT's) and self-clearing metallized hazy polypropylene capacitors. In addition, the use of amorphous nanocrystalline transformer core alloy permits high frequency voltage and current transformation with low loss and small size. Other unique concepts embodied in the converter-modulator topology are polyphase resonant voltage multiplication and resonant rectification. These techniques further reduce size and improve electrical efficiency. Because of the resonant conversion techniques, electronic 'crowbars' and other load protective networks are not required. A shorted load detunes the circuit resonance and little power transfer can occur. This yields a high-power, high-voltage system that is inherently self-protective. To provide regulated output voltages, Pulse Width Modulation (PWM) of the individual IGBT pulses is used. A Digital signal Processor (DSP) is used to control the IGBT's, with adaptive feed forward and feedback control algorithms that improve pulse fidelity. The converter-modulator has many attributes that make it attractive to various pulse power and plasma applications such as high power RF sources, neutral beam modulators, and various plasma applications. This paper will review the design as used for the SNS accelerator and speculate on related plasma applications.

  20. Gas separation membrane module assembly

    DOE Patents [OSTI]

    Wynn, Nicholas P (Palo Alto, CA); Fulton, Donald A. (Fairfield, CA)

    2009-03-31T23:59:59.000Z

    A gas-separation membrane module assembly and a gas-separation process using the assembly. The assembly includes a set of tubes, each containing gas-separation membranes, arranged within a housing. The housing contains a tube sheet that divides the space within the housing into two gas-tight spaces. A permeate collection system within the housing gathers permeate gas from the tubes for discharge from the housing.

  1. Analysis of local carrier modulation in InAs semiconductor nanowire transistors

    E-Print Network [OSTI]

    Wang, Deli

    , and drain compared with that of back gate. Com- pared to a surrounding-gate geometry, a top-gate structure as a function of probe tip position, at both high and low drain bias, reveal that carrier and current modulation is strongest when the probe tip is near the source and drain nanowire contacts, and decreases at greater tip

  2. Model documentation Coal Market Module of the National Energy Modeling System

    SciTech Connect (OSTI)

    NONE

    1996-04-30T23:59:59.000Z

    This report documents objectives and conceptual and methodological approach used in the development of the National Energy Modeling System (NEMS) Coal Market Module (CMM) used to develop the Annual Energy Outlook 1996 (AEO96). This report catalogues and describes the assumptions, methodology, estimation techniques, and source code of CMM`s three submodules: Coal Production Submodule, Coal Export Submodule, and Coal Distribution Submodule.

  3. Access Regulation to Hot-Modules in Wormhole NoCs

    E-Print Network [OSTI]

    Ginosar, Ran

    1 Access Regulation to Hot-Modules in Wormhole NoCs I. Walter1 , I. Cidon2 , R. Ginosar2 , A low-cost credit based distributed access regulation technique that fairly allocates access rights between the source and destination in a pipeline fashion. The main drawback of wormhole switching is its

  4. DC source assemblies

    DOE Patents [OSTI]

    Campbell, Jeremy B; Newson, Steve

    2013-02-26T23:59:59.000Z

    Embodiments of DC source assemblies of power inverter systems of the type suitable for deployment in a vehicle having an electrically grounded chassis are provided. An embodiment of a DC source assembly comprises a housing, a DC source disposed within the housing, a first terminal, and a second terminal. The DC source also comprises a first capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the first terminal. The DC source assembly further comprises a second capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the second terminal.

  5. Multi-source ion funnel

    DOE Patents [OSTI]

    Tang, Keqi; Belov, Mikhail B.; Tolmachev, Aleksey V.; Udseth, Harold R.; Smith, Richard D.

    2005-12-27T23:59:59.000Z

    A method for introducing ions generated in a region of relatively high pressure into a region of relatively low pressure by providing at least two electrospray ion sources, providing at least two capillary inlets configured to direct ions generated by the electrospray sources into and through each of the capillary inlets, providing at least two sets of primary elements having apertures, each set of elements having a receiving end and an emitting end, the primary sets of elements configured to receive a ions from the capillary inlets at the receiving ends, and providing a secondary set of elements having apertures having a receiving end and an emitting end, the secondary set of elements configured to receive said ions from the emitting end of the primary sets of elements and emit said ions from said emitting end of the secondary set of elements. The method may further include the step of providing at least one jet disturber positioned within at least one of the sets of primary elements, providing a voltage, such as a dc voltage, in the jet disturber, thereby adjusting the transmission of ions through at least one of the sets of primary elements.

  6. A Framework for Modeling Uncertainty in Regional Climate Change

    E-Print Network [OSTI]

    Monier, Erwan

    In this study, we present a new modeling framework and a large ensemble of climate projections to investigate the uncertainty in regional climate change over the US associated with four dimensions of uncertainty. The sources ...

  7. Sources of the Radio Background Considered

    SciTech Connect (OSTI)

    Singal, J.; /KIPAC, Menlo Park /Stanford U.; Stawarz, L.; /KIPAC, Menlo Park /Stanford U. /Jagiellonian U., Astron. Observ.; Lawrence, A.; /Edinburgh U., Inst. Astron. /KIPAC, Menlo Park /Stanford U.; Petrosian, V.; /KIPAC, Menlo Park /Stanford U., Phys. Dept. /Stanford U., Appl. Phys. Dept.

    2011-08-22T23:59:59.000Z

    We investigate possible origins of the extragalactic radio background reported by the ARCADE 2 collaboration. The surface brightness of the background is several times higher than that which would result from currently observed radio sources. We consider contributions to the background from diffuse synchrotron emission from clusters and the intergalactic medium, previously unrecognized flux from low surface brightness regions of radio sources, and faint point sources below the flux limit of existing surveys. By examining radio source counts available in the literature, we conclude that most of the radio background is produced by radio point sources that dominate at sub {mu}Jy fluxes. We show that a truly diffuse background produced by elections far from galaxies is ruled out because such energetic electrons would overproduce the observed X-ray/{gamma}-ray background through inverse Compton scattering of the other photon fields. Unrecognized flux from low surface brightness regions of extended radio sources, or moderate flux sources missed entirely by radio source count surveys, cannot explain the bulk of the observed background, but may contribute as much as 10%. We consider both radio supernovae and radio quiet quasars as candidate sources for the background, and show that both fail to produce it at the observed level because of insufficient number of objects and total flux, although radio quiet quasars contribute at the level of at least a few percent. We conclude that the most important population for production of the background is likely ordinary starforming galaxies above redshift 1 characterized by an evolving radio far-infrared correlation, which increases toward the radio loud with redshift.

  8. Approved Module Information for ME4501, 2014/5 Module Title/Name: Computational Fluid Dynamics and

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    and Applications Module Code: ME4501 School: Engineering and Applied Science Module Type: Standard Module New-requisites: Thermodynamics and Fluids (ME3011). Engineering Mathematics 2 (AM21EM). Co-requisites: None Specified ModuleApproved Module Information for ME4501, 2014/5 Module Title/Name: Computational Fluid Dynamics

  9. Approved Module Information for EE2DPS, 2014/5 Module Title/Name: Digital and Programmable Electronic

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Electronic Systems Module Code: EE2DPS School: Engineering and Applied Science Module Type: Standard ModuleApproved Module Information for EE2DPS, 2014/5 Module Title/Name: Digital and Programmable to Exchange Students? Not Specified Module Dependancies Pre-requisites: Sequential State Machines (EE2SSM). Co

  10. Chemically etched modulation in wire radius for wire array Z-pinch perturbation studies.

    SciTech Connect (OSTI)

    Bland, Simon Nicholas (Blackett Laboratory, Imperial College, London, UK); Lebedev, S. V. (Blackett Laboratory, Imperial College, London, UK); Hall, G. (Blackett Laboratory, Imperial College, London, UK); Ramacciotti, J. P. (MPCL/Ktech Corp., Albuquerque, New Mexico); Griego, A. E. (MPCL/Ktech Corp., Albuquerque, New Mexico); Lobley, Dennis Keith (MPCL/Ktech Corp., Albuquerque, New Mexico); Martin, K. L. (MPCL/Ktech Corp., Albuquerque, New Mexico); Ampleford, David J. (Blackett Laboratory, Imperial College, London, UK); McKenney, John Lee; Bott, S. C. (Blackett Laboratory, Imperial College, London, UK); Garrity, James Emmett (MPCL/Ktech Corp., Albuquerque, New Mexico); Jones, B.; Rapley, J. (Blackett Laboratory, Imperial College, London, UK); Deeney, Christopher; Palmer, J. B. A. (Blackett Laboratory, Imperial College, London, UK)

    2004-06-01T23:59:59.000Z

    A technique for manufacturing wires with imposed modulation in radius with axial wavelengths as short as 1 mm is presented. Extruded aluminum 5056 with 15 {micro}m diameter was masked and chemically etched to reduce the radius by {approx}20% in selected regions. Characterized by scanning electron microscopy, the modulation in radius is a step function with a {approx}10 {micro}m wide conical transition between thick and thin segments, with some pitting in etched regions. Techniques for mounting and aligning these wires in arrays for fast z-pinch experiments will be discussed. Axially mass-modulated wire arrays of this type will allow the study of seeded Rayleigh-Taylor instabilities in z pinches, corona formation, wire initiation with varying current density in the wire core, and correlation of perturbations between adjacent wires. This tool will support magnetohydrodynamics code validation in complex three-dimensional geometries, and perhaps x-ray pulse shaping.

  11. Chemically etched modulation in wire radius for wire array Z-pinch perturbation studies

    SciTech Connect (OSTI)

    Jones, B.; Deeney, C.; McKenney, J.L.; Garrity, J.E.; Lobley, D.K.; Martin, K.L.; Griego, A.E.; Ramacciotti, J.P.; Bland, S.N.; Lebedev, S.V.; Bott, S.C.; Ampleford, D.J.; Palmer, J.B.A.; Rapley, J.; Hall, G. [Sandia National Laboratories, Albuquerque, New Mexico 87123 (United States); MPCL/Ktech Corp., Albuquerque, New Mexico 87123 (United States); Blackett Laboratory, Imperial College, London SW7 2BZ (United Kingdom)

    2004-11-01T23:59:59.000Z

    A technique for manufacturing wires with imposed modulation in radius with axial wavelengths as short as 1 mm is presented. Extruded aluminum 5056 with 15 {mu}m diameter was masked and chemically etched to reduce the radius by {approx}20% in selected regions. Characterized by scanning electron microscopy, the modulation in radius is a step function with a {approx}10 {mu}m wide conical transition between thick and thin segments, with some pitting in etched regions. Techniques for mounting and aligning these wires in arrays for fast z-pinch experiments will be discussed. Axially mass-modulated wire arrays of this type will allow the study of seeded Rayleigh-Taylor instabilities in z pinches, corona formation, wire initiation with varying current density in the wire core, and correlation of perturbations between adjacent wires. This tool will support magnetohydrodynamics code validation in complex three-dimensional geometries, and perhaps x-ray pulse shaping.

  12. Approved Module Information for CS2260, 2014/5 Module Title/Name: Human-Computer Interaction Module Code: CS2260

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: CS2260 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module groupwork-based tutorials are used to structures students' application of theory from the lectures with tutorial activites Module Assessment Methods of Assessment & associated weighting (including approaches

  13. Approved Module Information for AM20SR, 2014/5 Module Title/Name: Stochastic Processes Module Code: AM20SR

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : AM20SR School: Engineering and Applied Science Module Type: Standard Module New Module? No Module to work with appropriate probability distributions as required. 2.Be able to interpret problems using Hours: 100 hours Learning & Teaching Rationale: Lectures and Tutorials Module Assessment Methods

  14. Approved Module Information for AM10IM, 2014/5 Module Title/Name: Introduction to Matlab Module Code: AM10IM

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: AM10IM School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Rationale: Lectures and tutorials/lab Module Assessment Methods of Assessment & associated weighting pieces of written work) to returned to the School Coursework Office. Examination 70% January Examination

  15. Approved Module Information for CE1102, 2014/5 Module Title/Name: Organic Chemistry for Engineers Module Code: CE1102

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Module Code: CE1102 School: Engineering and Applied Science Module Type: Standard Module New Module of Delivery Learning Hours Lecture: 12 hours Tutorial: 2 hours Lab Session: 8 hours Independent Study: 80 reading, tutorial support and supervised laboratory sessions. Module Assessment Methods of Assessment

  16. Approved Module Information for AM20AA, 2014/5 Module Title/Name: Abstract Algebra Module Code: AM20AA

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    20AA School: Engineering and Applied Science Module Type: Standard Module New Module? No Module, of a range of results and theorems in the indicative module content (see below) 2. Be able to apply and algebraic structures. 2. Enhance the students? understanding of the need for and nature of rigorous

  17. Approved Module Information for EE4PEL, 2014/5 Module Title/Name: Power Electronics Module Code: EE4PEL

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    waveforms and calculate switching losses. * Use of oscilloscopes and meters to measure waveforms in powerApproved Module Information for EE4PEL, 2014/5 Module Title/Name: Power Electronics Module Code: EE Credits: 10 Module Management Information Module Leader Name Andrew Cross Email Address a

  18. Approved Module Information for EC307C, 2014/5 Module Title/Name: Green Building Module Code: EC307C

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for EC307C, 2014/5 Module Title/Name: Green Building Module Code: EC307 construction; * Conventional and novel materials appropriate for green building; Professional Module Learning Information Module Aims: By building on previous knowledge and experience, to develop

  19. Approved Module Information for EC316C, 2014/5 Module Title/Name: Facilities Management Module Code: EC316C

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Level Agreements within Facilities Management ? Quality and Contract Management in Facilities ManagementApproved Module Information for EC316C, 2014/5 Module Title/Name: Facilities Management Module Code Credits: 10 Module Management Information Module Leader Name Yakubu Olawale Email Address olawalya

  20. In-situ calibration: migrating control system IP module calibration from the bench to the storage ring

    SciTech Connect (OSTI)

    Weber, Jonah M.; Chin, Michael

    2002-04-30T23:59:59.000Z

    The Control System for the Advanced Light Source (ALS) at Lawrence Berkeley National Lab (LBNL) uses in-house designed IndustryPack(registered trademark) (IP) modules contained in compact PCI (cPCI) crates with 16-bit analog I/O to control instrumentation. To make the IP modules interchangeable, each module is calibrated for gain and offset compensation. We initially developed a method of verifying and calibrating the IP modules in a lab bench test environment using a PC with LabVIEW. The subsequent discovery that the ADCs have significant drift characteristics over periods of days of installed operation prompted development of an ''in-situ'' calibration process--one in which the IP modules can be calibrated without removing them from the cPCI crates in the storage ring. This paper discusses the original LabVIEW PC calibration and the migration to the proposed in-situ EPICS control system calibration.

  1. A 100-kc modulation system for an EPR microwave spectrometer

    E-Print Network [OSTI]

    Stewart, Frank Edwin

    1964-01-01T23:59:59.000Z

    LIST OF FIGURES FIGURE PAGE II-1 Molecular Structure of DPPH 22 II-2 11-3 III-1 IV-1 Hyperfine Splitting in the DPPH EPR Spectrum . 25 Hyperfine Splitting in the Mn EpR Spectrum , . 27 100-kc Field Modulation and Detection System . 4I Typical... spectrometer. Most EPR spectrometers induce transitions at microwave frequencies and split the Zeeman levels with a polarizing field of 3400 gauss' The inherent advantage of operating in this region is that high sensitivities can be realized from small...

  2. Thermodynamic properties of a magnetically modulated graphene

    E-Print Network [OSTI]

    SK Firoz Islam; Naveen K. Singh; Tarun Kanti Ghosh

    2011-09-12T23:59:59.000Z

    The effect of magnetic modulation on thermodynamic properties of a graphene monolayer in presence of a constant perpendicular magnetic field is reported here. One-dimensional spatial electric or magnetic modulation lifts the degeneracy of the Landau levels and converts into bands and their band width oscillates with magnetic field leading to Weiss-type oscillation in the thermodynamic properties. The effect of magnetic modulation on thermodynamic properties of a graphene sheet is studied and then compared with electrically modulated graphene and magnetically modulated conventional two-dimensional electron gas (2DEG). We observe Weiss-type and de Haas-van Alphen (dHvA) oscillations at low and high magnetic field, respectively. There is a definite phase difference in Weiss-type oscillations in thermodynamic quantities of magnetically modulated graphene in compare to electrically modulated graphene. On the other hand, the phase remains same and amplitude of the oscillation is large when compared with the magnetically modulated 2DEG. Explicit asymptotic expressions of density of states and the Helmholtz free energy are provided to understand the phase and amplitude of the Weiss-type oscillations qualitatively. We also study thermodynamic properties when both electric and magnetic modulations are present. The Weiss-type oscillations still exist when the modulations are out-of-phase.

  3. Global atmospheric transport and source-receptor1 relationships for arsenic2

    E-Print Network [OSTI]

    Wu, Shiliang

    important anthropogenic arsenic sources7-10 with45 copper smelting being the dominant source6 contributions from anthropogenic sources. Metal (copper, zinc and lead)44 smelting and coal combustion are two 11 . In China and Chile, the dominated arsenic source55 #12;4 regions in northern and southern

  4. The Effects of Great Plains Irrigation on the Surface Energy Balance, Regional Circulation, and Precipitation

    E-Print Network [OSTI]

    Huber, David B.; Brunsell, Nathaniel A.; Mechem, David B.

    2014-05-05T23:59:59.000Z

    Irrigation provides a needed source of water in regions of low precipitation. Adding water to a region that would otherwise see little natural precipitation alters the partitioning of surface energy fluxes, the evolution of the planetary boundary...

  5. E-Print Network 3.0 - appalachian mountain region Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (GRAM) Program Award. Graduate School, Appalachian State University. "Arid region... of stream restoration on woody riparian vegetation of Southern ... Source: Collection:...

  6. Cicrumnuclear Supernova Remnants and HII Regions in NGC 253

    E-Print Network [OSTI]

    James S. Ulvestad

    2000-03-31T23:59:59.000Z

    Archival VLA data has been used to produce arcsecond-resolution 6- and 20-cm images of the region surrounding the nuclear 200-pc (~15") starburst in NGC 253. Twenty-two discrete sources stronger than 0.4 mJy have been detected within ~2 kpc (~3') of the galaxy nucleus; almost all these sources must be associated with the galaxy. None of the radio sources coincides with a detected X-ray binary, so they appear to be due to supernova remnants and H II regions. The region outside the central starburst has a derived radio supernova rate of <~0.1/yr, and may account for at least 20% of the recent star formation in NGC 253. Most of the newly identified sources have steep, nonthermal radio spectra, but several relatively strong thermal sources also exist, containing the equivalent of tens of O5 stars. These stars are spread over tens of parsecs, and are embedded in regions having average ionized gas densities of 20-200/cm^3, much lower than in the most active nuclear star-forming regions in NGC 253 or in the super star clusters seen in other galaxies. The strongest region of thermal emission coincides with a highly reddened area seen at near-infrared wavelengths, possibly containing optically obscured H II regions.

  7. Dynamic radioactive particle source

    DOE Patents [OSTI]

    Moore, Murray E.; Gauss, Adam Benjamin; Justus, Alan Lawrence

    2012-06-26T23:59:59.000Z

    A method and apparatus for providing a timed, synchronized dynamic alpha or beta particle source for testing the response of continuous air monitors (CAMs) for airborne alpha or beta emitters is provided. The method includes providing a radioactive source; placing the radioactive source inside the detection volume of a CAM; and introducing an alpha or beta-emitting isotope while the CAM is in a normal functioning mode.

  8. Modules over principal ideal rings

    E-Print Network [OSTI]

    Vieaux, Jules Bellin

    1957-01-01T23:59:59.000Z

    957 Na)or Sub]sot: Nathematics MODULES OVER PRINCIPAL IDEAL RINGS A Thesis Jules Bellin Vieaux Approved as to style and content by: (Chairman of Committee) (Head of Department r Student Advisor) August 1957 ACKNOWLEDGMENT I would like... to express my sincere appreciation to Dr. W. E. Koss and Dr. E. R. Keown for their aid and d. irection in the writing of this thesis. J ~ BE V TABLE OP CONTENTS Preface ~ ~ + ~ o ~ ~ ~ o ~ ~ oeooe ~ ~ ~ ~oo ~ a ~ oo ~ o ~ oo. o. . e 1 I. Principal...

  9. Modules over principal ideal rings 

    E-Print Network [OSTI]

    Vieaux, Jules Bellin

    1957-01-01T23:59:59.000Z

    need to note, however, , the difference between the two types of "union" of a set of submodules N 1 of a module N, The first is the "set-theoretic union" con- sisting of representatives of all the distinct elements to be found in the Ni... ideal R, which cons1sts of the elements of the ring. Consider the subset B of R of all elements of the form ra + na, where r and a are ring ele- ments and n is an integer. If rla + nla, r2a + n2a s B, then la + nla 2 2a la r2a + la 2 = (rl - r2)a...

  10. module 4 | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015ofDepartment of EnergyThePatricia2012)HR5 TRANSITION BRIEFING module 4 More

  11. SOURCE SELECTION INFORMATION -

    Office of Environmental Management (EM)

    on Energy and Water Development U.S. House of Representatives The Honorable Lamar Alexander Ranking Member SOURCE SELECTION INFORMATION - SEE FEDERAL ACQUISITION...

  12. SOURCE SELECTION INFORMATION -

    Energy Savers [EERE]

    on Energy and Water Development U.S. House of Representatives The Honorable Lamar Alexander SOURCE SELECTION INFORMATION - SEE FEDERAL ACQUISITION REGULATION (FAR)...

  13. SOURCE SELECTION INFORMATION -

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SOURCE SELECTION INFORMATION - SEE FEDERAL ACQUISITION REGULATION (FAR) 2.101 AND 3.104 Department of Energy Washington, DC 20585 (enter date here, centered revised template...

  14. Publications | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    research at the APS. It is the official source for listing APS-related journal articles, conference proceedings and papers, dissertations, books, book chapters, technical reports,...

  15. Quasar H II Regions During Cosmic Reionization

    E-Print Network [OSTI]

    Marcelo A. Alvarez; Tom Abel

    2007-09-10T23:59:59.000Z

    Cosmic reionization progresses as HII regions form around sources of ionizing radiation. Their average size grows continuously until they percolate and complete reionization. We demonstrate how this typical growth can be calculated around the largest, biased sources of UV emission, such as quasars, by further developing an analytical model based on the excursion set formalism. This approach allows us to calculate the sizes and growth of the HII regions created by the progenitors of any dark matter halo of given mass and redshift with a minimum of free parameters. Statistical variations in the size of these pre-existing HII regions are an additional source of uncertainty in the determination of very high redshift quasar properties from their observed HII region sizes. We use this model to demonstrate that the transmission gaps seen in very high redshift quasars can be understood from the radiation of only their progenitors and associated clustered small galaxies. The fit sets a lower limit on the redshift of overlap at z = 5.8 +/- 0.1. This interpretation makes the transmission gaps independent of the age of the quasars observed. If this interpretation were correct it would raise the prospects of using radio interferometers currently under construction to detect the epoch of reionization.

  16. CDKN-CARICOM-A Regional Implementation Plan for CARICOM's Regional...

    Open Energy Info (EERE)

    CARICOM-A Regional Implementation Plan for CARICOM's Regional Climate Change Resilience Framework Jump to: navigation, search Name CDKN-CARICOM-A Regional Implementation Plan for...

  17. Power module assemblies with staggered coolant channels

    DOE Patents [OSTI]

    Herron, Nicholas Hayden; Mann, Brooks S; Korich, Mark D

    2013-07-16T23:59:59.000Z

    A manifold is provided for supporting a power module assembly with a plurality of power modules. The manifold includes a first manifold section. The first face of the first manifold section is configured to receive the first power module, and the second face of the first manifold section defines a first cavity with a first baseplate thermally coupled to the first power module. The first face of the second manifold section is configured to receive the second power module, and the second face of the second manifold section defines a second cavity with a second baseplate thermally coupled to the second power module. The second face of the first manifold section and the second face of the second manifold section are coupled together such that the first cavity and the second cavity form a coolant channel. The first cavity is at least partially staggered with respect to second cavity.

  18. Approved Module Information for CS1040, 2014/5 Module Title/Name: Multimedia Software and Applications Module Code: CS1040

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    #12;Indicative Module Content: Multimedia concepts, development, hardware, software lifecycle and animation Multimedia and the Internet Software development using suitable multimedia software packagesApproved Module Information for CS1040, 2014/5 Module Title/Name: Multimedia Software

  19. Narrowband inverse Compton scattering x-ray sources at high laser intensities

    E-Print Network [OSTI]

    Seipt, D; Surzhykov, A; Fritzsche, S

    2014-01-01T23:59:59.000Z

    Narrowband x- and gamma-ray sources based on the inverse Compton scattering of laser pulses suffer from a limitation of the allowed laser intensity due to the onset of nonlinear effects that increase their bandwidth. It has been suggested that laser pulses with a suitable frequency modulation could compensate this ponderomotive broadening and reduce the bandwidth of the spectral lines, which would allow to operate narrowband Compton sources in the high-intensity regime. In this paper we, therefore, present the theory of nonlinear Compton scattering in a frequency modulated intense laser pulse. We systematically derive the optimal frequency modulation of the laser pulse from the scattering matrix element of nonlinear Compton scattering, taking into account the electron spin and recoil. We show that, for some particular scattering angle, an optimized frequency modulation completely cancels the ponderomotive broadening for all harmonics of the backscattered light. We also explore how sensitive this compensation ...

  20. An ultrafast carbon nanotube terahertz polarisation modulator

    SciTech Connect (OSTI)

    Docherty, Callum J.; Stranks, Samuel D.; Habisreutinger, Severin N.; Joyce, Hannah J.; Herz, Laura M.; Nicholas, Robin J.; Johnston, Michael B., E-mail: m.johnston@physics.ox.ac.uk [Department of Physics, University of Oxford, Clarendon Laboratory, Parks Road, Oxford OX1 3PU (United Kingdom)

    2014-05-28T23:59:59.000Z

    We demonstrate ultrafast modulation of terahertz radiation by unaligned optically pumped single-walled carbon nanotubes. Photoexcitation by an ultrafast optical pump pulse induces transient terahertz absorption in nanowires aligned parallel to the optical pump. By controlling the polarisation of the optical pump, we show that terahertz polarisation and modulation can be tuned, allowing sub-picosecond modulation of terahertz radiation. Such speeds suggest potential for semiconductor nanowire devices in terahertz communication technologies.

  1. CEMI Western Regional Summit

    Broader source: Energy.gov [DOE]

    Please Join Assistant Secretary of Energy Dr. David Danielson for the Clean Energy Manufacturing Initiative's Western Regional Summit. Register now for this free event.

  2. Optical sensing based on wavelength modulation spectroscopy

    DOE Patents [OSTI]

    Buckley, Steven G. (Redmond, WA); Gharavi, Mohammadreza (Tehran, IR); Borchers; Marco (Berlin, DE)

    2011-06-28T23:59:59.000Z

    Techniques, apparatus and systems for using Wavelength Modulation Spectroscopy measurements to optically monitor gas media such as gases in gas combustion chambers.

  3. Module Encapsulation Materials, Processing and Testing (Presentation...

    Office of Scientific and Technical Information (OSTI)

    Energy operated by the Alliance for Sustainable Energy, LLC Module Encapsulation Materials, Processing and Testing John Pern, Ph.D. National Center for Photovoltaics (NCPV)...

  4. Solid State Marx Modulators for Emerging Applications

    SciTech Connect (OSTI)

    Kemp, M.A.; /SLAC

    2012-09-14T23:59:59.000Z

    Emerging linear accelerator applications increasingly push the boundaries of RF system performance and economics. The power modulator is an integral part of RF systems whose characteristics play a key role in the determining parameters such as efficiency, footprint, cost, stability, and availability. Particularly within the past decade, solid-state switch based modulators have become the standard in high-performance, high power modulators. One topology, the Marx modulator, has characteristics which make it particularly attractive for several emerging applications. This paper is an overview of the Marx topology, some recent developments, and a case study of how this architecture can be applied to a few proposed linear accelerators.

  5. Integrated Performance Testing Workshop, Modules 6 - 11

    SciTech Connect (OSTI)

    Leach, Janice; Torres, Teresa M.

    2012-10-01T23:59:59.000Z

    These modules cover performance testing of: Interior Detection Systems; Access Controls; Exterior Detection Systems; Video Assessment Systems; SNM / Contraband Detection Systems; Access Delay Elements

  6. Sandia National Laboratories: PV module development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    module development Sandians Win 'Best Paper' Award at Photovoltaic Conference in Japan On March 4, 2015, in Computational Modeling & Simulation, Energy, Facilities, News, News &...

  7. Name of Module: Optical Remote Sensing

    E-Print Network [OSTI]

    Wichmann, Felix

    calibration, pre-processing of satellite images, arithmetic image operations, principal axis transform, image textures, microwave systems, radar with synthetic aperture (SAR) 3. Module Components Course Name

  8. Dense optical-electrical interface module

    SciTech Connect (OSTI)

    Paul Chang

    2000-12-21T23:59:59.000Z

    The DOIM (Dense Optical-electrical Interface Modules) is a custom-designed optical data transmission module employed in the upgrade of Silicon Vertex Detector of CDF experiment at Fermilab. Each DOIM module consists of a transmitter (TX) converting electrical differential input signals to optical outputs, a middle segment of jacketed fiber ribbon cable, and a receiver (RX) which senses the light inputs and converts them back to electrical signals. The targeted operational frequency is 53 MHz, and higher rate is achievable. This article outlines the design goals, implementation methods, production test results, and radiation hardness tests of these modules.

  9. Advanced Low Temperature Absorption Chiller Module Integrated...

    Broader source: Energy.gov (indexed) [DOE]

    Advanced Low Temperature Absorption Chiller Module Integrated with a CHP System at a Distributed Data Center - Presentation by Exergy Partners Corp., June 2011 Advanced Low...

  10. In-line thermoelectric module

    DOE Patents [OSTI]

    Pento, Robert (Algonquin, IL); Marks, James E. (Glenville, NY); Staffanson, Clifford D. (S. Glens Falls, NY)

    2000-01-01T23:59:59.000Z

    A thermoelectric module with a plurality of electricity generating units each having a first end and a second end, the units being arranged first end to second end along an in-line axis. Each unit includes first and second elements each made of a thermoelectric material, an electrically conductive hot member arranged to heat one side of the first element, and an electrically conductive cold member arranged to cool another side of the first element and to cool one side of the second element. The hot member, the first element, the cold member and the second element are supported in a fixture, are electrically connected respectively to provide an electricity generating unit, and are arranged respectively in positions along the in-line axis. The individual components of each generating unit and the respective generating units are clamped in their in-line positions by a loading bolt at one end of the fixture and a stop wall at the other end of the fixture. The hot members may have a T-shape and the cold members an hourglass shape to facilitate heat transfer. The direction of heat transfer through the hot members may be perpendicular to the direction of heat transfer through the cold members, and both of these heat transfer directions may be perpendicular to the direction of current flow through the module.

  11. Approved Module Information for PH2502, 2014/5 Module Title/Name: Pharmaceutical

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Credits: 20 Module Management Information Module Leader Name Deborah Lowry Email Address lowryd: To provide students with a background knowledge and understanding of microbiology. The range of microbes by microbes, disinfection and sterilisation, testing and evaluation of sterility and preservation

  12. Galaxy Structural Parameters in Source Extractor

    E-Print Network [OSTI]

    B. W. Holwerda

    2007-10-16T23:59:59.000Z

    Over the last decade, the Concentration, Asymmetry and Smoothness (CAS), as well as the M20 and GINI parameters have become popular to automatically classify distant galaxies in images. Ellipticals, spirals and irregular galaxies all appear to occupy different regions of this parameter space. At the same time, the Source Extractor (SE) program has become the mainstay to produce ob ject catalogs from large image surveys. A logical next step would be to incorporate the structural parameters into the Source Extractor software. There are however several problems that arise: 1) the CAS parameters are fits to the images and Source Extractor eschews fits in the interest of speed, 2) the definition of the structural parameters changed over time. Now that there is a clear and agreed-upon definition of the structural parameters, I am incorporating computed versions in the Source Extractor code (v2.5). The fitted CAS parameters are available for the GOODS-N/S fields and I compare the computed structural parameters to those found by the previous fits. My goal is to expand the source structure information in Source Extractor catalogs in order to improve automatic identification of sources, specifically of distant galaxies. The computed parameters perform reasonably close to the fitted versions but noise appears in faint ob jects due to a lack of information. For a subset of objects, the asymmetry signal is outside the SE boundaries and Smoothness still fails to compute for many ob jects. Type classification based on the SE parameters still lacks resolving power.

  13. Radiation Source Replacement Workshop

    SciTech Connect (OSTI)

    Griffin, Jeffrey W.; Moran, Traci L.; Bond, Leonard J.

    2010-12-01T23:59:59.000Z

    This report summarizes a Radiation Source Replacement Workshop in Houston Texas on October 27-28, 2010, which provided a forum for industry and researchers to exchange information and to discuss the issues relating to replacement of AmBe, and potentially other isotope sources used in well logging.

  14. Lithium ion sources

    E-Print Network [OSTI]

    Roy, Prabir K.

    2014-01-01T23:59:59.000Z

    HIFAN 1866 Lithium ion sources by Prabir K. Roy, Wayne G.No. DE-AC02-05CH11231. Lithium ion sources Prabir K. RoyUSA Abstract A 10.9 cm diameter lithium alumino-silicate ion

  15. Neutron sources and applications

    SciTech Connect (OSTI)

    Price, D.L. [ed.] [Argonne National Lab., IL (United States); Rush, J.J. [ed.] [National Inst. of Standards and Technology, Gaithersburg, MD (United States)

    1994-01-01T23:59:59.000Z

    Review of Neutron Sources and Applications was held at Oak Brook, Illinois, during September 8--10, 1992. This review involved some 70 national and international experts in different areas of neutron research, sources, and applications. Separate working groups were asked to (1) review the current status of advanced research reactors and spallation sources; and (2) provide an update on scientific, technological, and medical applications, including neutron scattering research in a number of disciplines, isotope production, materials irradiation, and other important uses of neutron sources such as materials analysis and fundamental neutron physics. This report summarizes the findings and conclusions of the different working groups involved in the review, and contains some of the best current expertise on neutron sources and applications.

  16. Photonic crystal light source

    DOE Patents [OSTI]

    Fleming, James G. (Albuquerque, NM); Lin, Shawn-Yu (Albuquerque, NM); Bur, James A. (Corrales, NM)

    2004-07-27T23:59:59.000Z

    A light source is provided by a photonic crystal having an enhanced photonic density-of-states over a band of frequencies and wherein at least one of the dielectric materials of the photonic crystal has a complex dielectric constant, thereby producing enhanced light emission at the band of frequencies when the photonic crystal is heated. The dielectric material can be a metal, such as tungsten. The spectral properties of the light source can be easily tuned by modification of the photonic crystal structure and materials. The photonic crystal light source can be heated electrically or other heating means. The light source can further include additional photonic crystals that exhibit enhanced light emission at a different band of frequencies to provide for color mixing. The photonic crystal light source may have applications in optical telecommunications, information displays, energy conversion, sensors, and other optical applications.

  17. Piezotube borehole seismic source

    DOE Patents [OSTI]

    Daley, Tom M; Solbau, Ray D; Majer, Ernest L

    2014-05-06T23:59:59.000Z

    A piezoelectric borehole source capable of permanent or semipermanent insertion into a well for uninterrupted well operations is described. The source itself comprises a series of piezoelectric rings mounted to an insulative mandrel internally sized to fit over a section of well tubing, the rings encased in a protective housing and electrically connected to a power source. Providing an AC voltage to the rings will cause expansion and contraction sufficient to create a sonic pulse. The piezoelectric borehole source fits into a standard well, and allows for uninterrupted pass-through of production tubing, and other tubing and electrical cables. Testing using the source may be done at any time, even concurrent with well operations, during standard production.

  18. Pulsed ion beam source

    DOE Patents [OSTI]

    Greenly, John B. (Lansing, NY)

    1997-01-01T23:59:59.000Z

    An improved pulsed ion beam source having a new biasing circuit for the fast magnetic field. This circuit provides for an initial negative bias for the field created by the fast coils in the ion beam source which pre-ionize the gas in the source, ionize the gas and deliver the gas to the proper position in the accelerating gap between the anode and cathode assemblies in the ion beam source. The initial negative bias improves the interaction between the location of the nulls in the composite magnetic field in the ion beam source and the position of the gas for pre-ionization and ionization into the plasma as well as final positioning of the plasma in the accelerating gap. Improvements to the construction of the flux excluders in the anode assembly are also accomplished by fabricating them as layered structures with a high melting point, low conductivity material on the outsides with a high conductivity material in the center.

  19. A Fusing Switch for Fault Suppression in the SNS High Voltage Converter Modulators

    SciTech Connect (OSTI)

    Kemp, Mark A.; Burkhart, Craig; Nguyen, Minh N.; /SLAC; Anderson, David E.; /Oak Ridge

    2009-08-03T23:59:59.000Z

    The High Voltage Converter Modulators (HVCMs) at the Spallation Neutron Source (SNS) have operated in excess of a combined 250,000 hours. Performance and reliability improvements to the HVCM are ongoing to increase modulator availability as accelerator system demands increase. There is a relatively large amount of energy storage in the HVCMs, {approx}180 kJ. This energy has the potential to dump into unsuppressed faults, cause damage, and increase the time to repair. The 'fusing switch' concept involves isolation of this stored energy from the location of the most common faults. This paper introduces this concept and its application to the HVCMs.

  20. A wide bandwidth free-electron laser with mode locking using current modulation.

    SciTech Connect (OSTI)

    Kur, E.; Dunning, D. J.; McNeil, B. W. J.; Wurtele, J.; Zholents, A. A. (Accelerator Systems Division (APS)); (Univ. of California at Berkeley); (Univ. of Strathclyde); (STFC Daresbury Lab.); (LBNL)

    2011-01-20T23:59:59.000Z

    A new scheme for mode locking a free-electron laser amplifier is proposed based on electron beam current modulation. It is found that certain properties of the original concept, based on the energy modulation of electrons, are improved including the spectral brightness of the source and the purity of the series of short pulses. Numerical comparisons are made between the new and old schemes and between a mode-locked free-electron laser and self-amplified spontaneous emission free-electron laser. Illustrative examples using a hypothetical mode-locked free-electron laser amplifier are provided. The ability to generate intense coherent radiation with a large bandwidth is demonstrated.

  1. Regional Analysis Briefs

    Reports and Publications (EIA)

    2028-01-01T23:59:59.000Z

    Regional Analysis Briefs (RABs) provide an overview of specific regions that play an important role in world energy markets, either directly or indirectly. These briefs cover areas that are currently major producers (Caspian Sea), have geopolitical importance (South China Sea), or may have future potential as producers or transit areas (East Africa, Eastern Mediterranean).

  2. Silicon on insulator with active buried regions

    DOE Patents [OSTI]

    McCarthy, Anthony M. (Menlo Park, CA)

    1998-06-02T23:59:59.000Z

    A method for forming patterned buried components, such as collectors, sources and drains, in silicon-on-insulator (SOI) devices. The method is carried out by epitaxially growing a suitable sequence of single or multiple etch stop layers ending with a thin silicon layer on a silicon substrate, masking the silicon such that the desired pattern is exposed, introducing dopant and activating in the thin silicon layer to form doped regions. Then, bonding the silicon layer to an insulator substrate, and removing the silicon substrate. The method additionally involves forming electrical contact regions in the thin silicon layer for the buried collectors.

  3. Silicon on insulator with active buried regions

    DOE Patents [OSTI]

    McCarthy, A.M.

    1996-01-30T23:59:59.000Z

    A method is disclosed for forming patterned buried components, such as collectors, sources and drains, in silicon-on-insulator (SOI) devices. The method is carried out by epitaxially growing a suitable sequence of single or multiple etch stop layers ending with a thin silicon layer on a silicon substrate, masking the silicon such that the desired pattern is exposed, introducing dopant and activating in the thin silicon layer to form doped regions. Then, bonding the silicon layer to an insulator substrate, and removing the silicon substrate. The method additionally involves forming electrical contact regions in the thin silicon layer for the buried collectors. 10 figs.

  4. Silicon on insulator with active buried regions

    DOE Patents [OSTI]

    McCarthy, Anthony M. (Menlo Park, CA)

    1996-01-01T23:59:59.000Z

    A method for forming patterned buried components, such as collectors, sources and drains, in silicon-on-insulator (SOI) devices. The method is carried out by epitaxially growing a suitable sequence of single or multiple etch stop layers ending with a thin silicon layer on a silicon substrate, masking the silicon such that the desired pattern is exposed, introducing dopant and activating in the thin silicon layer to form doped regions. Then, bonding the silicon layer to an insulator substrate, and removing the silicon substrate. The method additionally involves forming electrical contact regions in the thin silicon layer for the buried collectors.

  5. Silicon on insulator with active buried regions

    DOE Patents [OSTI]

    McCarthy, A.M.

    1998-06-02T23:59:59.000Z

    A method is disclosed for forming patterned buried components, such as collectors, sources and drains, in silicon-on-insulator (SOI) devices. The method is carried out by epitaxially growing a suitable sequence of single or multiple etch stop layers ending with a thin silicon layer on a silicon substrate, masking the silicon such that the desired pattern is exposed, introducing dopant and activating in the thin silicon layer to form doped regions. Then, bonding the silicon layer to an insulator substrate, and removing the silicon substrate. The method additionally involves forming electrical contact regions in the thin silicon layer for the buried collectors. 10 figs.

  6. Dual Chamber Laser Ion Source at Lisol

    E-Print Network [OSTI]

    Yu. Kudryavtsev; T. E. Cocolios; J. Gentens; M. Huyse; O. Ivanov; D. Pauwels; T. Sonoda; P. Van den Bergh; P. Van Duppen

    2009-04-23T23:59:59.000Z

    A new type of the gas cell for the resonance ionization laser ion source at the Leuven Isotope Separator On Line (LISOL) has been developed and tested at off-line and on-line conditions. Two-step selective laser ionization is applied to produce purified beams of radioactive isotopes. The selectivity of the ion source has been increased by more than one order of magnitude by separation of the stopping and laser ionization regions. This allows to use electrical fields for further ion purification.

  7. MATH 101A: ALGEBRA I PART B: RINGS AND MODULES 35 9. Modules over a PID

    E-Print Network [OSTI]

    Igusa, Kiyoshi

    MATH 101A: ALGEBRA I PART B: RINGS AND MODULES 35 9. Modules over a PID This week we are proving the fundamental theorem for finitely gener- ated modules over a PID, namely that they are all direct sums in correct logical order. 9.1. torsion and torsion-free. Suppose that R is a PID and M is a finitely

  8. Approved Module Information for LE3024, 2014/5 Module Title/Name: Leadership & Management

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Communication: 1 Module Code: LE3024 School: Languages and Social Sciences Module Type: Standard Module New the internet for business-oriented communication, research, and publication; apply the knowledge and management texts, and ii) to develop and use a range of leadership communication skills; iii) reflect

  9. Evolution of HII regions in hierarchically structured molecular clouds

    E-Print Network [OSTI]

    Stanislav Shabala; Simon Ellingsen; Stan Kurtz; Larry Forbes

    2006-07-26T23:59:59.000Z

    We present observations of the H91$\\alpha$ recombination line emission towards a sample of nine HII regions associated with 6.7-GHz methanol masers, and report arcsecond-scale emission around compact cores. We derive physical parameters for our sources, and find that although simple hydrostatic models of region evolution reproduce the observed region sizes, they significantly underestimate emission measures. We argue that these findings are consistent with young source ages in our sample, and can be explained by existence of density gradients in the ionised gas.

  10. Efficient Electro-Optical Modulation Based on Indium Tin Oxide

    E-Print Network [OSTI]

    Shi, Kaifeng

    2015-01-01T23:59:59.000Z

    We experimentally demonstrate several electro-optical modulators based on transparent conducting oxides. Our previous work demonstrated the modulator structure on glass substrate with broadband bias polarity-dependent modulation. Further exploration shows similar modulation effect of the modulator on quartz and silicon substrate.

  11. Water Masers Toward Ultracompact HII Regions

    E-Print Network [OSTI]

    S. Kurtz; P. Hofner

    2005-07-01T23:59:59.000Z

    We present a survey in the 6_{16}-5_{23} rotational water transition toward 33 galactic ultracompact HII regions. Maser emission is detected toward 18 of these sources; two are new detections. High quality spectra are provided for all 18 sources. We discuss the detection rate of this survey and the correlation of various maser properties with other physical parameters. In addition, we report wide-bandwidth (316 km/s), moderate-resolution (~ 3'') water maser observations of the HH80-81 region. We report the first detection of water maser emission at the approximate velocity of the molecular core. This emission is coincident with the extreme tip of the thermal jet, and well-removed from the much stronger and well-known maser emission at the position of VLA-3.

  12. Modulational instability of ion acoustic wave with warm ions in electron-positron-ion plasmas

    SciTech Connect (OSTI)

    Mahmood, S. [Theoretical Plasma Physics Division, PINSTECH, P.O. Nilore, Islamabad 44000 (Pakistan); Department of Physics and Applied Mathematics, PIEAS, P.O. Nilore, Islamabad 44000 (Pakistan); Siddiqui, Sadiya [Department of Physics and Applied Mathematics, PIEAS, P.O. Nilore, Islamabad 44000 (Pakistan); Jehan, Nusrat [Pakistan Atomic Energy Commission, P.O. Box 1114, Islamabad 44000 (Pakistan)

    2011-05-15T23:59:59.000Z

    The nonlinear amplitude modulation of ion acoustic wave is studied in the presence of warm ions in unmagnetized electron-positron-ion plasmas. The Krylov-Bogoliubov-Mitropolsky (KBM) method is used to derive the nonlinear Schroedinger equation. The dispersive and nonlinear coefficients are obtained which depends on the ion temperature and positron density in electron-positron-ion plasmas. The modulationally stable and unstable regions are studied numerically for a wide range of wave number. It is found that both ion temperature and positron density play a significant role in the formation of bright and dark envelope solitons in electron-positron-ion plasmas.

  13. Response to dynamical modulation of the optical lattice for fermions in the Hubbard model

    SciTech Connect (OSTI)

    Xu Zhaoxin; Yang Shuxiang; Sheehy, Daniel E.; Moreno, Juana; Jarrell, Mark [Department of Physics and Astronomy, Louisiana State University, Baton Rouge, Louisiana 70803 (United States); Chiesa, Simone [Physics Department, University of California, Davis, California 95616 (United States); Physics Department, University of Tennessee, Knoxville, Tennessee 37996 (United States); Su Shiquan [Department of Physics and Astronomy, Louisiana State University, Baton Rouge, Louisiana 70803 (United States); Center for Computational Sciences, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831 (United States); Scalettar, Richard T. [Physics Department, University of California, Davis, California 95616 (United States)

    2011-08-15T23:59:59.000Z

    Fermionic atoms in a periodic optical lattice provide a realization of the single-band Hubbard model. Using quantum Monte Carlo simulations along with the maximum-entropy method, we evaluate the effect of a time-dependent perturbative modulation of the optical lattice amplitude on atomic correlations, revealed in the fraction of doubly occupied sites. We find that the effect of modulation depends strongly on the filling--the response of the double occupation is significantly different in the half-filled Mott insulator from that in the doped Fermi liquid region.

  14. Chemical Reactor Models of Digestion Modulation

    E-Print Network [OSTI]

    Logan, David

    Chemical Reactor Models of Digestion Modulation William Wolesensky & J. David Logan Department give an overview of the application of chemical reactor theory to models of digestion processes and indicate how those models extend to eco-physiological questions of modulation of digestion and feeding

  15. Development Status of the ILC Marx Modulator

    SciTech Connect (OSTI)

    Nguyen, M.; Beukers, T.; Burkhart, C.; Larsen, R.; Olsen, J.; Tang, T.; /SLAC

    2008-06-16T23:59:59.000Z

    The ILC Marx Modulator is under development as a lower cost alternative to the 'Baseline Conceptual Design' (BCD) klystron modulator. Construction of a prototype Marx is complete and testing is underway at SLAC. The Marx employs solid state elements, IGBTs and diodes, to control the charge, discharge and isolation of the modules. The prototype is based on a stack of sixteen modules, each initially charged to {approx}11 kV, which are arranged in a Marx topology. Initially, eleven modules combine to produce the 120 kV output pulse. The remaining modules are switched in after appropriate delays to compensate for the voltage droop that results from the discharge of the energy storage capacitors. Additional elements will further regulate the output voltage to {+-} 0.5%. The Marx presents several advantages over the conventional klystron modulator designs. It is physically smaller; there is no pulse transformer (quite massive at these parameters) and the energy storage capacitor bank is quite small, owing to the active droop compensation. It is oil-free; voltage hold-off is achieved using air insulation. It is air cooled; the secondary air-water heat exchanger is physically isolated from the electronic components. This paper outlines the current developmental status of the prototype Marx. It presents a detailed electrical and mechanical description of the modulator and operational test results. It will discuss electrical efficiency measurements, fault testing, and output voltage regulation.

  16. Development Status of The ILC Marx Modulator

    SciTech Connect (OSTI)

    Nguyen, M; Beukers, T.; Burkhart, C.; Larsen, R.; Olsen, J.; Tang, T.; /SLAC; ,

    2010-06-07T23:59:59.000Z

    The ILC Marx Modulator is under development as a lower cost alternative to the 'Baseline Conceptual Design' (BCD) klystron modulator. Construction of a prototype Marx is complete and testing is underway at SLAC. The Marx employs solid state elements, IGBTs and diodes, to control the charge, discharge and isolation of the modules. The prototype is based on a stack of sixteen modules, each initially charged to {approx}11 kV, which are arranged in a Marx topology. Initially, eleven modules combine to produce the 120 kV output pulse. The remaining modules are switched in after appropriate delays to compensate for the voltage droop that results from the discharge of the energy storage capacitors. Additional elements will further regulate the output voltage to {+-}0.5%. The Marx presents several advantages over the conventional klystron modulator designs. It is physically smaller; there is no pulse transformer (quite massive at these parameters) and the energy storage capacitor bank is quite small, owing to the active droop compensation. It is oil-free; voltage hold-off is achieved using air insulation. It is air cooled; the secondary air-water heat exchanger is physically isolated from the electronic components. This paper outlines the current developmental status of the prototype Marx. It presents a detailed electrical and mechanical description of the modulator and operational test results. It will discuss electrical efficiency measurements, fault testing, and output voltage regulation.

  17. Modulated optical vortices Jennifer E. Curtis 1

    E-Print Network [OSTI]

    Grier, David

    Modulated optical vortices Jennifer E. Curtis 1 and David G. Grier Dept. of Physics, James Franck-beam optical gradient force traps created by focusing helical modes of light are known as optical vortices. Modulating the helical pitch of such a modes' wavefront yields a new class of optical traps whose dynamically

  18. Analysis and Design of Smart PV Module 

    E-Print Network [OSTI]

    Mazumdar, Poornima

    2012-12-10T23:59:59.000Z

    This thesis explores the design of a smart photovoltaic (PV) module- a PV module in which PV cells in close proximity are electrically grouped to form a pixel and are connected to dc-dc converter blocks which reside embedded in the back pane...

  19. EELE408 Photovoltaics Lecture 17 Photovoltaic Modules

    E-Print Network [OSTI]

    Kaiser, Todd J.

    1 EELE408 Photovoltaics Lecture 17 Photovoltaic Modules Dr. Todd J. Kaiser tjkaiser to temperature effects and other non ideal conditions · Allows for voltage drops across other PV system components · Requires 15 V to charge a 12 V battery 10 Module Current · Depends primarily on size of solar

  20. Analysis and Design of Smart PV Module

    E-Print Network [OSTI]

    Mazumdar, Poornima

    2012-12-10T23:59:59.000Z

    This thesis explores the design of a smart photovoltaic (PV) module- a PV module in which PV cells in close proximity are electrically grouped to form a pixel and are connected to dc-dc converter blocks which reside embedded in the back pane...

  1. Testing Protocol for Module Encapsulant Creep (Presentation)

    SciTech Connect (OSTI)

    Kempe, M. D.; Miller, D. C.; Wohlgemuth, J. H.; Kurtz, S. R.; Moseley, J. M.; Shah, Q.; Tamizhmani, G.; Sakurai, K.; Inoue, M.; Doi, T.; Masuda, A.

    2012-02-01T23:59:59.000Z

    Recently there has been an interest in the use of thermoplastic encapsulant materials in photovoltaic modules to replace chemically crosslinked materials, e.g., ethylene-vinyl acetate. The related motivations include the desire to: reduce lamination time or temperature; use less moisture-permeable materials; or use materials with better corrosion characteristics. However, the use of any thermoplastic material in a high-temperature environment raises safety and performance concerns, as the standardized tests currently do not expose the modules to temperatures in excess of 85C, yet modules may experience temperatures above 100C in operation. Here we constructed eight pairs of crystalline-silicon modules and eight pairs of glass/encapsulation/glass mock modules using different encapsulation materials of which only two were designed to chemically crosslink. One module set was exposed outdoors with insulation on the back side in Arizona in the summer, and an identical set was exposed in environmental chambers. High precision creep measurements and performance measurements indicate that despite many of these polymeric materials being in the melt state at some of the highest outdoor temperatures achievable, very little creep was seen because of their high viscosity, temperature heterogeneity across the modules, and in the case of the crystalline-silicon modules, the physical restraint of the backsheet. These findings have very important implications for the development of IEC and UL qualification and safety standards, and in regards to the necessary level of cure during the processing of crosslinking encapsulants.

  2. Module Handbook Core Univ. of Oldenburg

    E-Print Network [OSTI]

    Habel, Annegret

    Energy Conversion Process · Location Dependence of Wind Energy Potential and Wind Energy Forecasting/EUREC Course 2008/2009 #12;EUREC Core Courses at University of Oldenburg, 1st Semester Wind Energy Module Module Description: Wind Energy Field: Core Oldenburg Courses: Wind Energy Wind Energy

  3. Microfabricated diffusion source

    DOE Patents [OSTI]

    Oborny, Michael C. (Albuquerque, NM); Frye-Mason, Gregory C. (Cedar Crest, NM); Manginell, Ronald P. (Albuquerque, NM)

    2008-07-15T23:59:59.000Z

    A microfabricated diffusion source to provide for a controlled diffusion rate of a vapor comprises a porous reservoir formed in a substrate that can be filled with a liquid, a headspace cavity for evaporation of the vapor therein, a diffusion channel to provide a controlled diffusion of the vapor, and an outlet to release the vapor into a gas stream. The microfabricated diffusion source can provide a calibration standard for a microanalytical system. The microanalytical system with an integral diffusion source can be fabricated with microelectromechanical systems technologies.

  4. Fluid jet electric discharge source

    DOE Patents [OSTI]

    Bender, Howard A. (Ripon, CA)

    2006-04-25T23:59:59.000Z

    A fluid jet or filament source and a pair of coaxial high voltage electrodes, in combination, comprise an electrical discharge system to produce radiation and, in particular, EUV radiation. The fluid jet source is composed of at least two serially connected reservoirs, a first reservoir into which a fluid, that can be either a liquid or a gas, can be fed at some pressure higher than atmospheric and a second reservoir maintained at a lower pressure than the first. The fluid is allowed to expand through an aperture into a high vacuum region between a pair of coaxial electrodes. This second expansion produces a narrow well-directed fluid jet whose size is dependent on the size and configuration of the apertures and the pressure used in the reservoir. At some time during the flow of the fluid filament, a high voltage pulse is applied to the electrodes to excite the fluid to form a plasma which provides the desired radiation; the wavelength of the radiation being determined by the composition of the fluid.

  5. ION SOURCES FOR CYCLOTRONS

    E-Print Network [OSTI]

    Clark, D.J.

    2010-01-01T23:59:59.000Z

    These utilize lasers, plasma focus, sparks, and ex­ plodingextractor voltage A plasma focus device has been used byf n a s Fig. 22: The plasma focus high charge state source

  6. A surface ionization source 

    E-Print Network [OSTI]

    Buzatu, Daniel J.

    1995-01-01T23:59:59.000Z

    The main part of the work described herein is the development and testing of a surface ionization source for use on a collinear fast beam laser spectroscopy apparatus. A description of the previously existing fast beam apparatus is given...

  7. A surface ionization source

    E-Print Network [OSTI]

    Buzatu, Daniel J.

    1995-01-01T23:59:59.000Z

    The main part of the work described herein is the development and testing of a surface ionization source for use on a collinear fast beam laser spectroscopy apparatus. A description of the previously existing fast beam apparatus is given...

  8. National Synchrotron Light Source

    ScienceCinema (OSTI)

    None

    2010-01-08T23:59:59.000Z

    A tour of Brookhaven's National Synchrotron Light Source (NSLS). The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviole

  9. Galactic Superluminal Sources

    E-Print Network [OSTI]

    B. A. Harmon

    1998-12-21T23:59:59.000Z

    A new class of X-ray sources was clearly established with the discovery of highly relativistic radio jets from the galactic sources GRS 1915+105 and GRO J1655-40. Both of these objects have given us a broader view of black holes and the formation of jets, yet they also show the complexity of the accretion environment near relativistic objects. The fast apparent motion of the jets, their luminosity and variability, their high energy spectrum, and approximate scaling to the behavior of active galactic nuclei, certainly warrant the description "microquasar". I present a review of the observational data on these sources, and discuss where we stand on a physical picture of GRS 1915+105 and GRO J1655-40 as taken from multi-wavelength studies. I also point out other galactic sources which share some of the properties of the microquasars, and what to look for as a high energy "signature" in future observations.

  10. Computerized Energy Information Sources

    E-Print Network [OSTI]

    Gordon, D.

    1979-01-01T23:59:59.000Z

    Many computerized files of energy- and energy conservation-related information are currently available through commercial and governmental sources such as Lockheed Information Systems, System Development Corporation, and DOE/RECON. Private...

  11. FIVE-YEAR WILKINSON MICROWAVE ANISOTROPY PROBE OBSERVATIONS: SOURCE CATALOG

    SciTech Connect (OSTI)

    Wright, E. L.; Chen, X. [UCLA Physics and Astronomy, P.O. Box 951547, Los Angeles, CA 90095-1547 (United States); Odegard, N.; Hill, R. S.; Weiland, J. L. [Adnet Systems, Inc., 7515 Mission Dr., Suite A100, Lanham, MD 20706 (United States); Bennett, C. L.; Gold, B.; Larson, D. [Department of Physics and Astronomy, Johns Hopkins University, 3400 N. Charles St., Baltimore, MD 21218-2686 (United States); Hinshaw, G.; Wollack, E.; Kogut, A. [Code 665, NASA/Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Jarosik, N.; Page, L.; Dunkley, J. [Department of Physics, Jadwin Hall, Princeton University, Princeton, NJ 08544-0708 (United States); Komatsu, E. [Department of Astronomy, University of Texas, Austin, 2511 Speedway, RLM 15.306, Austin, TX 78712 (United States); Nolta, M. R. [Canadian Institute for Theoretical Astrophysics, University of Toronto, 60 St. George St., Toronto, ON M5S 3H8 (Canada); Spergel, D. N. [Department of Astrophysical Sciences, Peyton Hall, Princeton University, Princeton, NJ 08544-1001 (United States); Halpern, M. [Department of Physics and Astronomy, University of British Columbia, Vancouver, BC V6T 1Z1 (Canada); Limon, M. [Columbia Astrophysics Laboratory, 550 W. 120th St., Mail Code 5247, New York, NY 10027-6902 (United States); Meyer, S. S. [Departments of Astrophysics and Physics, KICP and EFI, University of Chicago, Chicago, IL 60637 (United States)], E-mail: wright@astro.ucla.edu (and others)

    2009-02-15T23:59:59.000Z

    We present the list of point sources found in the Wilkinson Microwave Anisotropy Probe (WMAP) five-year maps. The technique used in the first-year and three-year analyses now finds 390 point sources, and the five-year source catalog is complete for regions of the sky away from the Galactic plane to a 2 Jy limit, with SNR >4.7 in all bands in the least covered parts of the sky. The noise at high frequencies is still mainly radiometer noise, but at low frequencies the cosmic microwave background (CMB) anisotropy is the largest uncertainty. A separate search of CMB-free V-W maps finds 99 sources of which all but one can be identified with known radio sources. The sources seen by WMAP are not strongly polarized. Many of the WMAP sources show significant variability from year to year, with more than a 2:1 range between the minimum and maximum fluxes.

  12. Magnetron sputtering source

    DOE Patents [OSTI]

    Makowiecki, Daniel M. (Livermore, WA); McKernan, Mark A. (Livermore, CA); Grabner, R. Fred (Brentwood, CA); Ramsey, Philip B. (Livermore, CA)

    1994-01-01T23:59:59.000Z

    A magnetron sputtering source for sputtering coating substrates includes a high thermal conductivity electrically insulating ceramic and magnetically attached sputter target which can eliminate vacuum sealing and direct fluid cooling of the cathode assembly. The magnetron sputtering source design results in greater compactness, improved operating characteristics, greater versatility, and low fabrication cost. The design easily retrofits most sputtering apparatuses and provides for safe, easy, and cost effective target replacement, installation, and removal.

  13. Magnetron sputtering source

    DOE Patents [OSTI]

    Makowiecki, D.M.; McKernan, M.A.; Grabner, R.F.; Ramsey, P.B.

    1994-08-02T23:59:59.000Z

    A magnetron sputtering source for sputtering coating substrates includes a high thermal conductivity electrically insulating ceramic and magnetically attached sputter target which can eliminate vacuum sealing and direct fluid cooling of the cathode assembly. The magnetron sputtering source design results in greater compactness, improved operating characteristics, greater versatility, and low fabrication cost. The design easily retrofits most sputtering apparatuses and provides for safe, easy, and cost effective target replacement, installation, and removal. 12 figs.

  14. Field emission electron source

    DOE Patents [OSTI]

    Zettl, Alexander Karlwalter (Kensington, CA); Cohen, Marvin Lou (Berkeley, CA)

    2000-01-01T23:59:59.000Z

    A novel field emitter material, field emission electron source, and commercially feasible fabrication method is described. The inventive field emission electron source produces reliable electron currents of up to 400 mA/cm.sup.2 at 200 volts. The emitter is robust and the current it produces is not sensitive to variability of vacuum or the distance between the emitter tip and the cathode. The novel emitter has a sharp turn-on near 100 volts.

  15. National Synchrotron Light Source

    ScienceCinema (OSTI)

    BNL

    2009-09-01T23:59:59.000Z

    A tour of Brookhaven's National Synchrotron Light Source (NSLS), hosted by Associate Laboratory Director for Light Sources, Stephen Dierker. The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviolet, and x-ray light for basic and applied research in physics, chemistry, medicine, geophysics, environmental, and materials sciences.

  16. CHARGED PARTICLE IDENTIFICATION WITH MODULES OF THE PLASTIC BALL

    E-Print Network [OSTI]

    Gutbrod, H.H.

    2010-01-01T23:59:59.000Z

    WITH MODULES OF THE PLASTIC BALL H.H. Gutbrod, M.R. Maier,WITH MODULES OF THE PLASTIC BALL H.H. Gutbrod, M.R. Maier*,of modules of the Plastic Ball detector for positive pions

  17. Regional Districts (Texas)

    Broader source: Energy.gov [DOE]

    Adjacent Water Control and Improvement Districts and Municipal Utility Districts can opt to form a Regional District to oversee water issues. Such districts may be created:(1) to purchase, own,...

  18. Regional Carbon Sequestration Partnerships

    Broader source: Energy.gov [DOE]

    DOE has created a network of seven Regional Carbon Sequestration Partnerships (RCSPs) to help develop the technology, infrastructure, and regulations to implement large-scale CO2 storage (also...

  19. Approved Module Information for BN3389, 2014/5 Module Title/Name: Theory & Practice of eCommerce Module Code: BN3389

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Content: Week number Topics 1 Introduction to the module 2 Web Development basics 3-4 Software development & Teaching Rationale: Group work: the module design assumes that, in their final year, have the skillsApproved Module Information for BN3389, 2014/5 Module Title/Name: Theory & Practice of e

  20. Approved Module Information for EC211C, 2014/5 Module Title/Name: Estimation, Measurement & Scheduling Module Code: EC211C

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    & Scheduling Module Code: EC211C School: Engineering and Applied Science Module Type: Standard Module New Address s.h.park@aston.ac.uk Telephone Number Not Specified Office Not Specified Additional Module Tutor practice and scheduling using planning and control tools and techniques to evaluate students? own work

  1. Approved Module Information for EC114C, 2014/5 Module Title/Name: BIM for Construction Module Code: EC114C

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : EC114C School: Engineering and Applied Science Module Type: Standard Module New Module? Yes Module package Intellectual Skills i. Conveying 3D structural information in a standard 2D/3D format used when BIM including 2D/3D drawings is implemented. Links to Research: BIM is one of tools that I

  2. Approved Module Information for EE2CSY, 2014/5 Module Title/Name: Communication Systems Module Code: EE2CSY

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    ) Programmes in which available: BEng Electrical and Electronic Engineering. MEng Electrical and Electronic Engineering. BEng Electronic Engineering and Computer Science. MEng Electronic Engineering and Computer: EE2CSY School: Engineering and Applied Science Module Type: Standard Module New Module? No Module

  3. Approved Module Information for CE1009, 2014/5 Module Title/Name: Introduction to Transfer Processes Module Code: CE1009

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    of fluid mechanics Indicative Module Content: Part A: Mass and Enrgy balances ? Introduction to mass

  4. Approved Module Information for BN1135, 2014/5 Module Title/Name: Principles of Operations Management Module Code: BN1135

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    the role of quality management and TQM for improving the quality of a firm?s products and services operations? Quality Management ? Why quality is so important? ? What does quality mean? ? TQM & Continuous Management Module Code: BN1135 School: Aston Business School Module Type: Standard Module New Module

  5. Approved Module Information for BS2248, 2014/5 Module Title/Name: Introduction to Econometrics 2 Module Code: BS2248

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for BS2248, 2014/5 Module Title/Name: Introduction to Econometrics 2 Dependancies Pre-requisites: Introduction to Econometrics 1 (BS2247). Co-requisites: None Specified Module Learning Information Module Aims: To introduce the fundamental econometric theories and techniques

  6. EXTENSION OF THE EMPIRE CODE TO THE RESONANCE REGION.

    SciTech Connect (OSTI)

    CHO,Y.S.; HERMAN, M.; MUGHABGHAB, S.F.; OBLOZINSKY, P.; ROCHMAN, D.; LEE, Y.O.

    2007-04-22T23:59:59.000Z

    The preliminary version of a new module has been developed to be added to a nuclear reaction model code EMPIRE to allow for an evaluation of neutron cross sections in a resonance region. It automates most of the evaluation procedures and can be executed within EMPIRE or as a stand-alone program. The module includes a graphic user interface (GUI) and a number of codes and scripts that read individual, as well as average, resonance parameters from the Atlas of Neutron Resonances and other physical constants from RIPL-2, perform an analysis of the available resonances, carry out statistical distributions, and compute cross sections in resolved and unresolved resonance regions which are then compared with experimental data. The module also provides an ENDF-formatted file for a resonance region and various plots allowing for a verification of the procedure. The formatted file can be integrated later into the final ENDF-6 file as generated by the EMPIRE code. However, as a preliminary version, extensive testing and further improvements are needed before this new capability can be incorporated into the production version of EMPIRE.

  7. Long-range, full-duplex, modulated-reflector cell phone for voice/data transmission

    DOE Patents [OSTI]

    Neagley, Daniel L. (Albuquerque, NM); Briles, Scott D. (Los Alamos, NM); Coates, Don M. (Santa Fe, NM); Freund, Samuel M. (Los Alamos, NM)

    2002-01-01T23:59:59.000Z

    A long-range communications apparatus utilizing modulated-reflector technology is described. The apparatus includes an energy-transmitting base station and remote units that do not emit radiation in order to communicate with the base station since modulated-reflector technology is used whereby information is attached to an RF carrier wave originating from the base station which is reflected by the remote unit back to the base station. Since the remote unit does not emit radiation, only a low-power power source is required for its operation. Information from the base station is transmitted to the remote unit using a transmitter and receiver, respectively. The range of such a communications system is determined by the properties of a modulated-reflector half-duplex link.

  8. High-power rf-pulsed modulators for the Los Alamos free-electron laser

    SciTech Connect (OSTI)

    Johnson, W.J.D.; Lynch, M.T.; Tallerico, P.J.; Keffeler, D.R.; Hornkohl, J.O.

    1987-09-01T23:59:59.000Z

    In the rf-driven free-electron laser (FEL) at the Los Alamos National Laboratory, there are two pulsed-power rf modulators as sources for two tandem, side-coupled 20-MeV linear accelerators. The rf power used to control the cavity fields is supplied by two 5.5-MW modulating anode klystrons operating at a center frequency of 1300.2 MHz. The modulation of the 125 kV klystron is achieved by using a triode switch tube that provides a pulse width up to 300 ..mu..s and a pulse repetition rate up to 10 Hz. This paper describes the present configuration of these two duplicate systems and presents plans for meeting the requirements of future rf FEL experiments at Los Alamos. 12 refs., 5 figs.

  9. SEARCHING FOR NEW HYPERCOMPACT H II REGIONS

    SciTech Connect (OSTI)

    Sanchez-Monge, Alvaro [Osservatorio Astrofisico di Arcetri, INAF, Largo E. Fermi 5, I-50125 Firenze (Italy); Pandian, Jagadheep D. [Institute for Astronomy, University of Hawaii, 2680 Woodlawn Dr., Honolulu, HI 96822 (United States); Kurtz, Stan, E-mail: asanchez@arcetri.astro.it [Centro de RadioastronomIa y Astrofisica, Universidad Nacional Autonoma de Mexico, Apdo. Postal 3-72, 58090 Morelia, Michoacan (Mexico)

    2011-09-20T23:59:59.000Z

    Hypercompact (HC) H II regions are, by nature, very young H II regions, associated with the earliest stages of massive star formation. They may represent the transition phase as an early B-type star grows into an O-type star. Unfortunately, so few HC H II regions are presently known that their general attributes and defining characteristics are based on small number statistics. A larger sample is needed for detailed studies and good statistics. Class II methanol masers are one of the best indicators of the early stages of massive star formation. Using the Arecibo Methanol Maser Galactic Plane Survey-the most sensitive blind survey for 6.7 GHz methanol masers to date-we selected 24 HC H II region candidates. We made Expanded Very Large Array continuum observations at 3.6 and 1.3 cm to search for HC H II regions associated with these masers. We identified six potential HC H II regions in our sample based on the presence of optically thick free-free emission. Overall, we find that 30% of the methanol masers have an associated centimeter radio continuum source (separation less than 0.1 pc), which is in general agreement with previous studies.

  10. Environmental Information Sources

    E-Print Network [OSTI]

    Shrode, Flora

    2007-01-01T23:59:59.000Z

    The United Nations and Chernobyl http://chernobyl.undp.org/region affected" by the Chernobyl nuclear disaster in AprilUN official documents on Chernobyl nuclear accident as well

  11. Magnetic Landscape of Sun's Polar Region

    E-Print Network [OSTI]

    S. Tsuneta; K. Ichimoto; Y. Katsukawa; B. W. Lites; K. Matsuzaki; S. Nagata; D. Orozco Suarez; T. Shimizu; M. Shimojo; R. A. Shine; Y. Suematsu; T. K. Suzuki; T. D. Tarbell; A. M. Title

    2008-08-08T23:59:59.000Z

    We present the magnetic landscape of the polar region of the Sun that is unprecedented in terms of high spatial resolution, large field of view, and polarimetric precision. These observations were carried out with the Solar Optical Telescope aboard \\emph{Hinode}. Using a Milne-Eddington inversion, we found many vertically-oriented magnetic flux tubes with field strength as strong as 1 kG that are scattered in latitude between 70-90 degree. They all have the same polarity, consistent with the global polarity of the polar region. The field vectors were observed to diverge from the center of the flux elements, consistent with a view of magnetic fields that expand and fan out with height. The polar region is also covered with ubiquitous horizontal fields. The polar regions are the source of the fast solar wind channelled along unipolar coronal magnetic fields whose photospheric source is evidently rooted in the strong field, vertical patches of flux. We conjecture that vertical flux tubes with large expansion around the photosphere-corona boundary serve as efficient chimneys for Alfven waves that accelerate the solar wind.

  12. Large area, surface discharge pumped, vacuum ultraviolet light source

    DOE Patents [OSTI]

    Sze, Robert C. (Santa Fe, NM); Quigley, Gerard P. (Los Alamos, NM)

    1996-01-01T23:59:59.000Z

    Large area, surface discharge pumped, vacuum ultraviolet (VUV) light source. A contamination-free VUV light source having a 225 cm.sup.2 emission area in the 240-340 nm region of the electromagnetic spectrum with an average output power in this band of about 2 J/cm.sup.2 at a wall-plug efficiency of approximately 5% is described. Only ceramics and metal parts are employed in this surface discharge source. Because of the contamination-free, high photon energy and flux, and short pulse characteristics of the source, it is suitable for semiconductor and flat panel display material processing.

  13. Large area, surface discharge pumped, vacuum ultraviolet light source

    DOE Patents [OSTI]

    Sze, R.C.; Quigley, G.P.

    1996-12-17T23:59:59.000Z

    Large area, surface discharge pumped, vacuum ultraviolet (VUV) light source is disclosed. A contamination-free VUV light source having a 225 cm{sup 2} emission area in the 240-340 nm region of the electromagnetic spectrum with an average output power in this band of about 2 J/cm{sup 2} at a wall-plug efficiency of approximately 5% is described. Only ceramics and metal parts are employed in this surface discharge source. Because of the contamination-free, high photon energy and flux, and short pulse characteristics of the source, it is suitable for semiconductor and flat panel display material processing. 3 figs.

  14. Extended emission associated with young HII regions

    E-Print Network [OSTI]

    S. P. Ellingsen; S. S. Shabala; S. E. Kurtz

    2004-12-06T23:59:59.000Z

    We have used the Australia Telescope Compact Array (ATCA) to make observations of a sample of eight young ultra-compact HII regions, selected on the basis that they have associated class II methanol maser emission. We have made observations sensitive to both compact and extended structures and find both to be present in most sources. The scale of the extended emission in our sample is in general less than that observed towards samples based on IRAS properties, or large single-dish flux densities. Our observations are consistent with a scenario where extended and compact radio continuum emission coexists within HII regions for a significant period of time. We suggest that these observations are consistent with a model where HII evolution takes place within hierarchically structured molecular clouds. This model is the subject of a companion paper (Shabala et al. 2005) and addresses both the association between compact and extended emission and UCHII region lifetime problem.

  15. Study on PID Resistance of HIT PV Modules

    Broader source: Energy.gov (indexed) [DOE]

    2013 Photovoltaic Module Reliability Workshop NREL, Golden, CO February 26-27, 2013 Study on PID resistance of HIT PV modules Tasuku Ishiguro 1 , Hiroshi Kanno 1 , Mikio...

  16. annual modulation effect: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    an annual modulation in the WIMP direct detection rate. If the local WIMP velocity distribution is isotropic then the modulation is roughly sinusoidal with maximum in June,...

  17. Characterization of Dynamic Loads on Solar Modules with Respect...

    Broader source: Energy.gov (indexed) [DOE]

    "Interdependency of mechanical failure rate of encapsulated module laminate (for EVA) solar cells and module design parameters", Proc. SPIE Optics & Photonics, 2012 0 10 20 30 40...

  18. SunShot Presentation PV Module Reliabity Workshop Opening Session...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Presentation PV Module Reliabity Workshop Opening Session SunShot Presentation PV Module Reliabity Workshop Opening Session This PowerPoint slide deck was originally presented at...

  19. Energy Efficiency at Home - An Interdisciplinary Module for Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    at Home - An Interdisciplinary Module for Energy Education Energy Efficiency at Home - An Interdisciplinary Module for Energy Education Below is information about the student...

  20. Module Embedded Microinverter Smart Grid Ready Residential Solar...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    is developing and demonstrating a cost-reduction approach for an alternating-current (AC) photovoltaic (PV) module that is driven by innovations in microinverter design, module...

  1. Materials and Modules for Low Cost, High Performance Fuel Cell...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Modules for Low Cost, High Performance Fuel Cell Humidifiers Materials and Modules for Low Cost, High Performance Fuel Cell Humidifiers Presented at the Department of Energy Fuel...

  2. V-186: Drupal Login Security Module Security Bypass and Denial...

    Office of Environmental Management (EM)

    186: Drupal Login Security Module Security Bypass and Denial of Service Vulnerability V-186: Drupal Login Security Module Security Bypass and Denial of Service Vulnerability June...

  3. activity modulates codon: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for photovoltaic module efficiency of 33.9% (active area). The latest prototype module Photovoltaic Systems (ISFOC) in Puertollano, Spain, the efficiency significantly exceeds...

  4. activation modulates radioresistance: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for photovoltaic module efficiency of 33.9% (active area). The latest prototype module Photovoltaic Systems (ISFOC) in Puertollano, Spain, the efficiency significantly exceeds...

  5. activity modulates recovery: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for photovoltaic module efficiency of 33.9% (active area). The latest prototype module Photovoltaic Systems (ISFOC) in Puertollano, Spain, the efficiency significantly exceeds...

  6. activity modulates myeloid: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for photovoltaic module efficiency of 33.9% (active area). The latest prototype module Photovoltaic Systems (ISFOC) in Puertollano, Spain, the efficiency significantly exceeds...

  7. activation requires modulation: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for photovoltaic module efficiency of 33.9% (active area). The latest prototype module Photovoltaic Systems (ISFOC) in Puertollano, Spain, the efficiency significantly exceeds...

  8. akt activation modulates: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for photovoltaic module efficiency of 33.9% (active area). The latest prototype module Photovoltaic Systems (ISFOC) in Puertollano, Spain, the efficiency significantly exceeds...

  9. advanced modulation formats: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Websites Summary: Advanced Techniques for the Creation and Propagation of Modules in Cartesian Genetic Programming) advanced techniques for module creation and propagation...

  10. Characterization of Dynamic Loads on Solar Modules with Respect...

    Broader source: Energy.gov (indexed) [DOE]

    Characterization of Dynamic Loads on Solar Modules with Respect to Fracture of Solar Cells Characterization of Dynamic Loads on Solar Modules with Respect to Fracture of Solar...

  11. Materials, Modules, and Systems: An Atoms to Autos Approach to...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Materials, Modules, and Systems: An Atoms to Autos Approach to Automotive Thermoelectric Systems Development Materials, Modules, and Systems: An Atoms to Autos Approach to...

  12. Process Development for CIGS Based Thin Film Photovoltaics Modules, Phase II Technical Report

    SciTech Connect (OSTI)

    Britt, J.; Wiedeman, S.; Albright, S.

    2000-11-09T23:59:59.000Z

    As a technology partner with NREL, Global Solar Energy (GSE) has initiated an extensive and systematic plan to accelerate the commercialization of thin-film photovoltaics (PV) based on copper indium gallium diselenide (CIGS). The distinguishing feature of the GSE manufacturing process is the exclusive use of lightweight, flexible substrates. GSE has developed the technology to fabricate CIGS photovoltaics on both stainless-steel and polymer substrates. CIGS deposited on flexible substrates can be fabricated into either flexible or rigid modules. Low-cost, rigid PV panels for remote power, bulk/utility, telecommunication, and rooftop applications have been produced by affixing the flexible substrate to an inexpensive rigid panel by lamination or adhesive. Stainless-steel-based PV modules are fabricated by a novel interconnect method that avoids the use of wires or foils and soldered connections. In the case of polymer-based PV modules, the continuous roll is not sectioned into individual panels until the module buss and power leads are attached. Roll-to-roll vacuum deposition has several advantages that translate directly to reduced capital costs, greater productivity, improved yield, greater reliability, lower maintenance, and a larger volume of PV material. In combination with roll-to-roll processing, GSE has developed evaporation deposition operations that enable low-cost and high-efficiency CIGS modules. The CIGS deposition process relies heavily on effusion source technology developed at GSE, and solving numerous problems was an integral part of the source development effort. Cell interconnection for thin-film CIGS modules on a polyimide substrate presents a considerable challenge.

  13. Pulsed ion beam source

    DOE Patents [OSTI]

    Greenly, J.B.

    1997-08-12T23:59:59.000Z

    An improved pulsed ion beam source is disclosed having a new biasing circuit for the fast magnetic field. This circuit provides for an initial negative bias for the field created by the fast coils in the ion beam source which pre-ionize the gas in the source, ionize the gas and deliver the gas to the proper position in the accelerating gap between the anode and cathode assemblies in the ion beam source. The initial negative bias improves the interaction between the location of the nulls in the composite magnetic field in the ion beam source and the position of the gas for pre-ionization and ionization into the plasma as well as final positioning of the plasma in the accelerating gap. Improvements to the construction of the flux excluders in the anode assembly are also accomplished by fabricating them as layered structures with a high melting point, low conductivity material on the outsides with a high conductivity material in the center. 12 figs.

  14. Skew chicane based betatron eigenmode exchange module

    DOE Patents [OSTI]

    Douglas, David (Yorktown, VA)

    2010-12-28T23:59:59.000Z

    A skewed chicane eigenmode exchange module (SCEEM) that combines in a single beamline segment the separate functionalities of a skew quad eigenmode exchange module and a magnetic chicane. This module allows the exchange of independent betatron eigenmodes, alters electron beam orbit geometry, and provides longitudinal parameter control with dispersion management in a single beamline segment with stable betatron behavior. It thus reduces the spatial requirements for multiple beam dynamic functions, reduces required component counts and thus reduces costs, and allows the use of more compact accelerator configurations than prior art design methods.

  15. Microscale autonomous sensor and communications module

    DOE Patents [OSTI]

    Okandan, Murat; Nielson, Gregory N

    2014-03-25T23:59:59.000Z

    Various technologies pertaining to a microscale autonomous sensor and communications module are described herein. Such a module includes a sensor that generates a sensor signal that is indicative of an environmental parameter. An integrated circuit receives the sensor signal and generates an output signal based at least in part upon the sensor signal. An optical emitter receives the output signal and generates an optical signal as a function of the output signal. An energy storage device is configured to provide power to at least the integrated circuit and the optical emitter, and wherein the module has a relatively small diameter and thickness.

  16. Ensuring Quality of PV Modules: Preprint

    SciTech Connect (OSTI)

    Kurtz, S.; Wohlgemuth, J.; Hacke, P.; Kempe, M.; Sample, T.; Yamamichi, M.; Kondo, M.; Doi, T.; Otani, K.; Amano, J.

    2011-07-01T23:59:59.000Z

    Photovoltaic (PV) customers need to have confidence in the PV modules they purchase. Currently, no test can quantify a module's lifetime with confidence, but stress tests are routinely used to differentiate PV product designs. We suggest that the industry would be strengthened by using the wisdom of the community to develop a single set of tests that will help customers quantify confidence in PV products. This paper evaluates the need for quality assurance (QA) standards and suggests a path for creating these. Two types of standards are needed: 1) QA of the module design and 2) QA of the manufacturing process.

  17. Amplitude modulation of wind turbine noise

    E-Print Network [OSTI]

    Makarewicz, Rufin

    2013-01-01T23:59:59.000Z

    Due to swish and thump amplitude modulation, the noise of wind turbines cause more annoyance than other environmental noise of the same average level. The wind shear accounts for the thump modulation (van den Berg effect). Making use of the wind speed measurements at the hub height, as well as at the top and the bottom of the rotor disc (Fig.1), the non-standard wind profile is applied. It causes variations in the A-weighted sound pressure level, LpA. The difference between the maximum and minimum of LpA characterizes thump modulation (Fig.2).

  18. Method and apparatus for pulse width modulation control of an AC induction motor

    DOE Patents [OSTI]

    Geppert, Steven (Bloomfield Hills, MI); Slicker, James M. (Union Lake, MI)

    1984-01-01T23:59:59.000Z

    An inverter is connected between a source of DC power and a three-phase AC induction motor, and a micro-processor-based circuit controls the inverter using pulse width modulation techniques. In the disclosed method of pulse width modulation, both edges of each pulse of a carrier pulse train are equally modulated by a time proportional to sin .THETA., where .THETA. is the angular displacement of the pulse center at the motor stator frequency from a fixed reference point on the carrier waveform. The carrier waveform frequency is a multiple of the motor stator frequency. The modulated pulse train is then applied to each of the motor phase inputs with respective phase shifts of 120.degree. at the stator frequency. Switching control commands of electronic switches in the inverter are stored in a random access memory (RAM) and the locations of the RAM are successively read out in a cyclic manner, each bit of a given RAM location controlling a respective phase input of the motor. The DC power source preferably comprises rechargeable batteries and all but one of the electronic switches in the inverter can be disabled, the remaining electronic switch being part of a "flyback" DC-DC converter circuit for recharging the battery.

  19. Model documentation report: Commercial Sector Demand Module of the National Energy Modeling System

    SciTech Connect (OSTI)

    NONE

    1998-01-01T23:59:59.000Z

    This report documents the objectives, analytical approach and development of the National Energy Modeling System (NEMS) Commercial Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, model source code, and forecast results generated through the synthesis and scenario development based on these components. The NEMS Commercial Sector Demand Module is a simulation tool based upon economic and engineering relationships that models commercial sector energy demands at the nine Census Division level of detail for eleven distinct categories of commercial buildings. Commercial equipment selections are performed for the major fuels of electricity, natural gas, and distillate fuel, for the major services of space heating, space cooling, water heating, ventilation, cooking, refrigeration, and lighting. The algorithm also models demand for the minor fuels of residual oil, liquefied petroleum gas, steam coal, motor gasoline, and kerosene, the renewable fuel sources of wood and municipal solid waste, and the minor services of office equipment. Section 2 of this report discusses the purpose of the model, detailing its objectives, primary input and output quantities, and the relationship of the Commercial Module to the other modules of the NEMS system. Section 3 of the report describes the rationale behind the model design, providing insights into further assumptions utilized in the model development process to this point. Section 3 also reviews alternative commercial sector modeling methodologies drawn from existing literature, providing a comparison to the chosen approach. Section 4 details the model structure, using graphics and text to illustrate model flows and key computations.

  20. Planar photovoltaic solar concentrator module

    DOE Patents [OSTI]

    Chiang, Clement J. (New Brunswick, NJ)

    1992-01-01T23:59:59.000Z

    A planar photovoltaic concentrator module for producing an electrical signal from incident solar radiation includes an electrically insulating housing having a front wall, an opposing back wall and a hollow interior. A solar cell having electrical terminals is positioned within the interior of the housing. A planar conductor is connected with a terminal of the solar cell of the same polarity. A lens forming the front wall of the housing is operable to direct solar radiation incident to the lens into the interior of the housing. A refractive optical element in contact with the solar cell and facing the lens receives the solar radiation directed into the interior of the housing by the lens and directs the solar radiation to the solar cell to cause the solar cell to generate an electrical signal. An electrically conductive planar member is positioned in the housing to rest on the housing back wall in supporting relation with the solar cell terminal of opposite polarity. The planar member is operable to dissipate heat radiated by the solar cell as the solar cell generates an electrical signal and further forms a solar cell conductor connected with the solar cell terminal to permit the electrical signal generated by the solar cell to be measured between the planar member and the conductor.

  1. Planar photovoltaic solar concentrator module

    DOE Patents [OSTI]

    Chiang, C.J.

    1992-12-01T23:59:59.000Z

    A planar photovoltaic concentrator module for producing an electrical signal from incident solar radiation includes an electrically insulating housing having a front wall, an opposing back wall and a hollow interior. A solar cell having electrical terminals is positioned within the interior of the housing. A planar conductor is connected with a terminal of the solar cell of the same polarity. A lens forming the front wall of the housing is operable to direct solar radiation incident to the lens into the interior of the housing. A refractive optical element in contact with the solar cell and facing the lens receives the solar radiation directed into the interior of the housing by the lens and directs the solar radiation to the solar cell to cause the solar cell to generate an electrical signal. An electrically conductive planar member is positioned in the housing to rest on the housing back wall in supporting relation with the solar cell terminal of opposite polarity. The planar member is operable to dissipate heat radiated by the solar cell as the solar cell generates an electrical signal and further forms a solar cell conductor connected with the solar cell terminal to permit the electrical signal generated by the solar cell to be measured between the planar member and the conductor. 5 figs.

  2. COMBUSTION SOURCES OF NITROGEN COMPOUNDS

    E-Print Network [OSTI]

    Brown, Nancy J.

    2011-01-01T23:59:59.000Z

    Rasmussen, R.A. (1976). Combustion as a source of nitrousx control for stationary combustion sources. Prog. Energy,CA, March 3-4, 1977 COMBUSTION SOURCES OF NITROGEN COMPOUNDS

  3. Tsunami Information Sources: Part 3

    E-Print Network [OSTI]

    Wiegel, Robert L.

    2006-01-01T23:59:59.000Z

    Mofjeld, and A.J. Venturato, Puget Sound Tsunami Sources -Pub. Co. , 2006, pp 205-217 Puget Sound Tsunami Sources -Military Dept. , 2002, 25 pp Puget Sound Tsunami Sources -

  4. Experimental study on discretely modulated continuous-variable quantum key distribution

    SciTech Connect (OSTI)

    Shen Yong; Zou Hongxin; Chen Pingxing; Yuan Jianmin [Department of Physics, National University of Defense Technology, Changsha 410073 (China); Tian Liang [Department of Physics, National University of Defense Technology, Changsha 410073 (China); College of Optoelectronic Science and Engineering, National University of Defense Technology, Changsha 410073 (China)

    2010-08-15T23:59:59.000Z

    We present a discretely modulated continuous-variable quantum key distribution system in free space by using strong coherent states. The amplitude noise in the laser source is suppressed to the shot-noise limit by using a mode cleaner combined with a frequency shift technique. Also, it is proven that the phase noise in the source has no impact on the final secret key rate. In order to increase the encoding rate, we use broadband homodyne detectors and the no-switching protocol. In a realistic model, we establish a secret key rate of 46.8 kbits/s against collective attacks at an encoding rate of 10 MHz for a 90% channel loss when the modulation variance is optimal.

  5. Dual source heat pump

    DOE Patents [OSTI]

    Ecker, Amir L. (Dallas, TX); Pietsch, Joseph A. (Dallas, TX)

    1982-01-01T23:59:59.000Z

    What is disclosed is a heat pump apparatus for conditioning a fluid characterized by a fluid handler and path for circulating the fluid in heat exchange relationship with a refrigerant fluid; at least two refrigerant heat exchangers, one for effecting heat exchange with the fluid and a second for effecting heat exchange between refrigerant and a heat exchange fluid and the ambient air; a compressor for efficiently compressing the refrigerant; at least one throttling valve for throttling liquid refrigerant; a refrigerant circuit; refrigerant; a source of heat exchange fluid; heat exchange fluid circulating device and heat exchange fluid circuit for circulating the heat exchange fluid in heat exchange relationship with the refrigerant; and valves or switches for selecting the heat exchangers and direction of flow of the refrigerant therethrough for selecting a particular mode of operation. The heat exchange fluid provides energy for defrosting the second heat exchanger when operating in the air source mode and also provides a alternate source of heat.

  6. GX 9+9: VARIABILITY OF THE X-RAY ORBITAL MODULATION

    SciTech Connect (OSTI)

    Harris, Robert J. [Department of Physics and Kavli Institute for Astrophysics and Space Research, Massachusetts Institute of Technology, Cambridge, MA 02139 (United States); Levine, Alan M. [Kavli Institute for Astrophysics and Space Research, Massachusetts Institute of Technology, Cambridge, MA 02139 (United States); Durant, Martin; Shahbaz, Tariq [Instituto de AstrofIsica de Canarias, La Laguna, Tenerife (Spain); Kong, Albert K. H. [Department of Physics and Institute of Astronomy, National Tsing Hua University, Hsinchu, Taiwan (China); Charles, Phil [South African Astronomical Observatory, P.O. Box 9, Observatory 7935 (South Africa)], E-mail: rjharris@cfa.harvard.edu, E-mail: aml@space.mit.edu

    2009-05-10T23:59:59.000Z

    Results of observations of the Galactic bulge X-ray source GX 9+9 by the All-Sky Monitor (ASM) and Proportional Counter Array (PCA) onboard the Rossi X-ray Timing Explorer are presented. The ASM results show that the 4.19 hr X-ray periodicity first reported by Hertz and Wood in 1987 was weak or not detected for most of the mission prior to late 2004, but then became strong and remained strong for approximately two years after which it weakened considerably. When the modulation at the 4.19 hr period is strong, it appears in folded light curves as an intensity dip over {approx}<30% of a cycle and is distinctly nonsinusoidal. A number of PCA observations of GX 9+9 were performed before the appearance of strong modulation; two were performed in 2006 during the epoch of strong modulation. Data obtained from the earlier PCA observations yield, at best, limited evidence of the presence of phase-dependent intensity changes, while the data from the later observations confirm the presence of flux minima with depths and phases compatible with those apparent in folded ASM light curves. Light curves from a Chandra observation of GX 9+9 performed in the year 2000 prior to the start of strong modulation show the possible presence of shallow dips at the predicted times. Optical observations performed in 2006 while the X-ray modulation was strong do not show an increase in the degree of modulation at the 4.19 hr period. Implications of the changes in modulation strength in X-rays and other observational results are considered.

  7. OLED area illumination source

    DOE Patents [OSTI]

    Foust, Donald Franklin (Scotia, NY); Duggal, Anil Raj (Niskayuna, NY); Shiang, Joseph John (Niskayuna, NY); Nealon, William Francis (Gloversville, NY); Bortscheller, Jacob Charles (Clifton Park, NY)

    2008-03-25T23:59:59.000Z

    The present invention relates to an area illumination light source comprising a plurality of individual OLED panels. The individual OLED panels are configured in a physically modular fashion. Each OLED panel comprising a plurality of OLED devices. Each OLED panel comprises a first electrode and a second electrode such that the power being supplied to each individual OLED panel may be varied independently. A power supply unit capable of delivering varying levels of voltage simultaneously to the first and second electrodes of each of the individual OLED panels is also provided. The area illumination light source also comprises a mount within which the OLED panels are arrayed.

  8. Milagro Observations of TeV Emission from Galactic Sources in the Fermi Bright Source List

    E-Print Network [OSTI]

    Abdo, A A; Aune, T; Berley, D; Chen, C; Christopher, G E; DeYoung, T; Dingus, B L; Ellsworth, R W; González, M M; Goodman, J A; Hays, E; Hoffman, C M; Huentemeyer, P H; Kolterman, B E; Linnemann, J T; McEnery, J E; Morgan, T; Mincer, A I; Némethy, P; Pretz, J; Ryan, J M; Parkinson, P M Saz; Shoup, A; Sinnis, G; Smith, A J; Vasileiou, V; Walker, G P; Williams, D A; Yodh, G B

    2009-01-01T23:59:59.000Z

    We present the result of a search of Milagro sky map for spatial correlations with sources from a subset of the recent Fermi Bright Source List (BSL). The BSL consists of the 205 most significant sources detected above 100 MeV by the Fermi Large Area Telescope. We select sources based on their categorization in the BSL, taking all confirmed or possible Galactic sources in the field of view of Milagro. Of the 34 Fermi sources selected, 14 are observed by Milagro at a significance of 3 standard deviations or more. We conduct this search with a new analysis which employs newly-optimized gamma-hadron separation and utilizes the full 8-year Milagro dataset. Milagro is sensitive to gamma rays above 1 TeV and these results extend the observation of these sources far above the Fermi energy band. With the new analysis and additional data, TeV emission is definitively observed associated with the Fermi pulsar J2229.0+6114, in the the Boomerang Pulsar Wind Nebula (PWN). Furthermore, an extended region of TeV emission is...

  9. Solid state electrochromic light modulator

    DOE Patents [OSTI]

    Cogan, S.F.; Rauh, R.D.

    1990-07-03T23:59:59.000Z

    An all solid-state variable transmission electrochromic device has a source of charge compensating ions. An inorganic oxide counter electrode film which on reduction with the accompanying insertion of the charge compensating ions increases its transmission of light of predetermined wavelength is separated from a primary electrochromic film which on reduction with the accompanying insertion of the charge compensating ions decreases its transmission of light of predetermined wavelength by an insulating electrolyte film that transports the charge compensating ions. First and second electrodes are contiguous with the inorganic oxide counter electrode film and the primary electrochromic film, respectively, and separated by the three films. 4 figs.

  10. Solid state electrochromic light modulator

    SciTech Connect (OSTI)

    Cogan, Stuart F.; Rauh, R. David

    1993-12-07T23:59:59.000Z

    An all solid-state variable transmission electrochromic device has a source of charge compensating ions. An inorganic oxide counterelectrode film which on reduction with the accompanying insertion of the charge compensating ions increases its transmission of light of predetermined wavelength is separated from a primary electrochromic film which on reduction with the accompanying insertion of the charge compensating ions decreases its transmission of light of predetermined wavelength by an insulating electrolyte film that transports the charge compensating ions. First and second electrodes are contiguous with the inorganic oxide counter electrode film and the primary electrochromic film, respectively, and separated by the three films.

  11. Solid state electrochromic light modulator

    DOE Patents [OSTI]

    Cogan, Stuart F. (111 Downey St., Norwood, MA 02062); Rauh, R. David (111 Downey St., Norwood, MA 02062)

    1990-01-01T23:59:59.000Z

    An all solid-state variable transmission electrochromic device has a source of charge compensating ions. An inorganic oxide counterelectrode film which on reduction with the accompanying insertion of the charge compensating ions increases its transmission of light of predetermined wavelength is separated from a primary electrochromic film which on reduction with the accompanying insertion of the charge compensating ions decreases its transmission of light of predetermined wavelength by an insulating electrolyte film that transports the charge compensating ions. First and second electrodes are contiguous with the inorganic oxide counter electrode film and the primary electrochromic film, respectively, and separated by the three films.

  12. Solid state electrochromic light modulator

    SciTech Connect (OSTI)

    Cogan, Stuart F. (Sudbury, MA); Rauh, R. David (Newton, MA)

    1993-01-01T23:59:59.000Z

    An all solid-state variable transmission electrochromic device has a source of charge compensating ions. An inorganic oxide counterelectrode film which on reduction with the accompanying insertion of the charge compensating ions increases its transmission of light of predetermined wavelength is separated from a primary electrochromic film which on reduction with the accompanying insertion of the charge compensating ions decreases its transmission of light of predetermined wavelength by an insulating electrolyte film that transports the charge compensating ions. First and second electrodes are contiguous with the inorganic oxide counter electrode film and the primary electrochromic film, respectively, and separated by the three films.

  13. Low energy spread ion source with a coaxial magnetic filter

    DOE Patents [OSTI]

    Leung, Ka-Ngo (Hercules, CA); Lee, Yung-Hee Yvette (Berkeley, CA)

    2000-01-01T23:59:59.000Z

    Multicusp ion sources are capable of producing ions with low axial energy spread which are necessary in applications such as ion projection lithography (IPL) and radioactive ion beam production. The addition of a radially extending magnetic filter consisting of a pair of permanent magnets to the multicusp source reduces the energy spread considerably due to the improvement in the uniformity of the axial plasma potential distribution in the discharge region. A coaxial multicusp ion source designed to further reduce the energy spread utilizes a cylindrical magnetic filter to achieve a more uniform axial plasma potential distribution. The coaxial magnetic filter divides the source chamber into an outer annular discharge region in which the plasma is produced and a coaxial inner ion extraction region into which the ions radially diffuse but from which ionizing electrons are excluded. The energy spread in the coaxial source has been measured to be 0.6 eV. Unlike other ion sources, the coaxial source has the capability of adjusting the radial plasma potential distribution and therefore the transverse ion temperature (or beam emittance).

  14. WRAP Module 1 sampling and analysis plan

    SciTech Connect (OSTI)

    Mayancsik, B.A.

    1995-03-24T23:59:59.000Z

    This document provides the methodology to sample, screen, and analyze waste generated, processed, or otherwise the responsibility of the Waste Receiving and Processing Module 1 facility. This includes Low-Level Waste, Transuranic Waste, Mixed Waste, and Dangerous Waste.

  15. Laborlandschaft : redesigning the industrial laboratory module

    E-Print Network [OSTI]

    Farley, Alexander H. (Alexander Hamilton)

    2014-01-01T23:59:59.000Z

    This thesis proposes to redesign the industrial pharmaceutical laboratory typology by rethinking the composition of the laboratory module; the smallest functional sub-unit of the laboratory type. The design for this thesis ...

  16. Rack assembly for mounting solar modules

    DOE Patents [OSTI]

    Plaisted, Joshua Reed; West, Brian

    2012-09-04T23:59:59.000Z

    A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures to be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

  17. Rack assembly for mounting solar modules

    DOE Patents [OSTI]

    Plaisted, Joshua Reed (Oakland, CA); West, Brian (San Francisco, CA)

    2010-12-28T23:59:59.000Z

    A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures o be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

  18. PV Module Reliability Research (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-06-01T23:59:59.000Z

    This National Center for Photovoltaics sheet describes the capabilities of its PV module reliability research. The scope and core competencies and capabilities are discussed and recent publications are listed.

  19. Photovoltaic module with removable wind deflector

    DOE Patents [OSTI]

    Botkin, Jonathan (El Cerrito, CA); Graves, Simon (Berkeley, CA); Danning, Matt (Oakland, CA); Culligan, Matthew (Berkeley, CA)

    2012-08-07T23:59:59.000Z

    A photovoltaic (PV) module assembly including a PV module, a deflector, and a clip. The PV module includes a PV device and a frame. A PV laminate is assembled to the frame, and the frame includes a support arm forming a seat. The deflector defines a front face and a rear face, with the clip extending from either the trailing frame member or the rear face of the deflector. In a mounted state, the deflector is nested within the seat and is releasably mounted to the trailing frame member via the clip. In some embodiments, the support arm forms a second seat, with the PV module assembly providing a second mounted state in which the deflector is in a differing orientation/slope, nested within the second seat and releasably mounted to the trailing frame member via the clip.

  20. Photovoltaic module with removable wind deflector

    DOE Patents [OSTI]

    Botkin, Jonathan; Graves, Simon; Danning, Matt; Culligan, Matthew

    2014-02-18T23:59:59.000Z

    A photovoltaic (PV) module assembly including a PV module, a deflector, and a clip. The PV module includes a PV device and a frame. A PV laminate is assembled to the frame, and the frame includes a support arm forming a seat. The deflector defines a front face and a rear face, with the clip extending from either the trailing frame member or the rear face of the deflector. In a mounted state, the deflector is nested within the seat and is releasably mounted to the trailing frame member via the clip. In some embodiments, the support arm forms a second seat, with the PV module assembly providing a second mounted state in which the deflector is in a differing orientation/slope, nested within the second seat and releasably mounted to the trailing frame member via the clip.

  1. Photovoltaic module with removable wind deflector

    DOE Patents [OSTI]

    Botkin, Jonathan; Graves, Simon; Danning, Matt; Culligan, Matthew

    2013-05-28T23:59:59.000Z

    A photovoltaic (PV) module assembly including a PV module, a deflector, and a clip. The PV module includes a PV device and a frame. A PV laminate is assembled to the frame, and the frame includes a support arm forming a seat. The deflector defines a front face and a rear face, with the clip extending from either the trailing frame member or the rear face of the deflector. In a mounted state, the deflector is nested within the seat and is releasably mounted to the trailing frame member via the clip. In some embodiments, the support arm forms a second seat, with the PV module assembly providing a second mounted state in which the deflector is in a differing orientation/slope, nested within the second seat and releasably mounted to the trailing frame member via the clip.

  2. Isotopic evidence of a near surface history for the source rocks of the central Coast Plutonic Complex, British Columbia, Canada

    E-Print Network [OSTI]

    Wetmore, Paul H.

    Isotopic evidence of a near surface history for the source rocks of the central Coast Plutonic portion of the source rocks resided at near surface levels at some time prior to burial and partial an evolved crustal source. We argue that these data indicate that the rocks that formed the source region

  3. Generation of Coherent X-Ray Radiation Through Modulation Compression

    E-Print Network [OSTI]

    Qiang, Ji

    2010-01-01T23:59:59.000Z

    In this letter, we propose a scheme to generate tunable coherent X-ray radiation for future light source applications. This scheme uses an energy chirped electron beam, a laser modulators, a laser chirper and two bunch compressors to generate a prebunched kilo-Ampere current electron beam from a few tens Ampere electron beam out of a linac. The initial modulation energy wavelength can be compressed by a factor of $1+h_b R_{56}^a$ in phase space, where $h_b$ is the energy bunch length chirp introduced by the laser chirper, $R_{56}^a$ is the momentum compaction factor of the first bunch compressor. As an illustration, we present an example to generate more than $400$ MW, $170$ atto-seconds pulse, $1$ nm coherent X-ray radiation using a $60$ Ampere electron beam out of the linac and $200$ nm laser seed. Both the final wavelength and the radiation pulse length in the proposed scheme are tunable by adjusting the compression factor and the laser parameters.

  4. Two modulator generalized ellipsometer for complete mueller matrix measurement

    DOE Patents [OSTI]

    Jellison, Jr., Gerald E. (Oak Ridge, TN); Modine, Frank A. (Oak Ridge, TN)

    1999-01-01T23:59:59.000Z

    A two-modulator generalized ellipsometer (2-MGE) comprising two polarizer-photoelastic modulator (PEM) pairs, an optical light source, an optical detection system, and associated data processing and control electronics, where the PEMs are free-running. The input light passes through the first polarizer-PEM pair, reflects off the sample surface or passes through the sample, passes through the second PEM-polarizer pair, and is detected. Each PEM is free running and operates at a different resonant frequency, e.g., 50 and 60 kHz. The resulting time-dependent waveform of the light intensity is a complicated function of time, and depends upon the exact operating frequency and phase of each PEM, the sample, and the azimuthal angles of the polarizer-PEM pairs, but can be resolved into a dc component and eight periodic components. In one embodiment, the waveform is analyzed using a new spectral analysis technique that is similar to Fourier analysis to determine eight sample Mueller matrix elements (normalized to the m.sub.00 Mueller matrix element). The other seven normalized elements of the general 4.times.4 Mueller matrix can be determined by changing the azimuthal angles of the PEM-polarizer pairs with respect to the plane of incidence. Since this instrument can measure all elements of the sample Mueller matrix, it is much more powerful than standard ellipsometers.

  5. Generation of Coherent X-Ray Radiation Through Modulation Compression

    SciTech Connect (OSTI)

    Qiang, Ji; Wu, Juhao

    2010-12-14T23:59:59.000Z

    In this letter, we propose a scheme to generate tunable coherent X-ray radiation for future light source applications. This scheme uses an energy chirped electron beam, a laser modulators, a laser chirper and two bunch compressors to generate a prebunched kilo-Ampere current electron beam from a few tens Ampere electron beam out of a linac. The initial modulation energy wavelength can be compressed by a factor of 1 + h{sub b}R{sub 56}{sup a} phase space, where h{sub b} is the energy bunch length chirp introduced by the laser chirper, R{sub 56}{sup a} is the momentum compaction factor of the first bunch compressor. As an illustration, we present an example to generate more than 400 MW, 170 atto-seconds pulse, 1 nm coherent X-ray radiation using a 60 Ampere electron beam out. of the linac and 200 nm laser seed. Both the final wavelength and the radiation pulse length in the proposed scheme are tunable by adjusting the compression factor and the laser parameters.

  6. Diurnal modulation signal from dissipative hidden sector dark matter

    E-Print Network [OSTI]

    R. Foot; S. Vagnozzi

    2014-12-02T23:59:59.000Z

    We consider a simple generic dissipative dark matter model: a hidden sector featuring two dark matter particles charged under an unbroken $U(1)'$ interaction. Previous work has shown that such a model has the potential to explain dark matter phenomena on both large and small scales. In this framework, the dark matter halo in spiral galaxies features nontrivial dynamics, with the halo energy loss due to dissipative interactions balanced by a heat source. Ordinary supernovae can potentially supply this heat provided kinetic mixing interaction exists with strength $\\epsilon \\sim 10^{-9}$. This type of kinetically mixed dark matter can be probed in direct detection experiments. Importantly, this self-interacting dark matter can be captured within the Earth and shield a dark matter detector from the halo wind, giving rise to a diurnal modulation effect. We estimate the size of this effect for detectors located in the Southern hemisphere, and find that the modulation is large ($\\gtrsim 10\\%$) for a wide range of parameters.

  7. Light sources based on semiconductor current filaments

    DOE Patents [OSTI]

    Zutavern, Fred J. (Albuquerque, NM); Loubriel, Guillermo M. (Albuquerque, NM); Buttram, Malcolm T. (Sandia Park, NM); Mar, Alan (Albuquerque, NM); Helgeson, Wesley D. (Albuquerque, NM); O'Malley, Martin W. (Edgewood, NM); Hjalmarson, Harold P. (Albuquerque, NM); Baca, Albert G. (Albuquerque, NM); Chow, Weng W. (Cedar Crest, NM); Vawter, G. Allen (Albuquerque, NM)

    2003-01-01T23:59:59.000Z

    The present invention provides a new type of semiconductor light source that can produce a high peak power output and is not injection, e-beam, or optically pumped. The present invention is capable of producing high quality coherent or incoherent optical emission. The present invention is based on current filaments, unlike conventional semiconductor lasers that are based on p-n junctions. The present invention provides a light source formed by an electron-hole plasma inside a current filament. The electron-hole plasma can be several hundred microns in diameter and several centimeters long. A current filament can be initiated optically or with an e-beam, but can be pumped electrically across a large insulating region. A current filament can be produced in high gain photoconductive semiconductor switches. The light source provided by the present invention has a potentially large volume and therefore a potentially large energy per pulse or peak power available from a single (coherent) semiconductor laser. Like other semiconductor lasers, these light sources will emit radiation at the wavelength near the bandgap energy (for GaAs 875 nm or near infra red). Immediate potential applications of the present invention include high energy, short pulse, compact, low cost lasers and other incoherent light sources.

  8. Process of making solar cell module

    DOE Patents [OSTI]

    Packer, M.; Coyle, P.J.

    1981-03-09T23:59:59.000Z

    A process is presented for the manufacture of solar cell modules. A solution comprising a highly plasticized polyvinyl butyral is applied to a solar cell array. The coated array is dried and sandwiched between at last two sheets of polyvinyl butyral and at least two sheets of a rigid transparent member. The sandwich is laminated by the application of heat and pressure to cause fusion and bonding of the solar cell array with the rigid transparent members to produce a solar cell module.

  9. Stacked vapor fed amtec modules

    DOE Patents [OSTI]

    Sievers, Robert K. (North Huntingdon, PA)

    1989-01-01T23:59:59.000Z

    The present invention pertains to a stacked AMTEC module. The invention includes a tubular member which has an interior. The member is comprised of a ion conductor that substantially conducts ions relative to electrons, preferably a beta"-alumina solid electrolyte, positioned about the interior. A porous electrode for conducting electrons and allowing sodium ions to pass therethrough, and wherein electrons and sodium ions recombine to form sodium is positioned about the beta"-alumina solid electrolyte. The electrode is operated at a temperature and a pressure that allows the recombined sodium to vaporize. Additionally, an outer current collector grid for distributing electrons throughout the porous electrode is positioned about and contacts the porous electrode. Also included in the invention is transporting means for transporting liquid sodium to the beta"-alumina solid electrolyte of the tubular member. A transition piece is positioned about the interior of the member and contacts the transporting means. The transition piece divides the member into a first cell and a second cell such that each first and second cell has a beta"-alumina solid electrolyte, a first and second porous electrode and a grid. The transition piece conducts electrons from the interior of the tubular member. There is supply means for supplying sodium to the transporting means. Preferably the supply means is a shell which surrounds the tubular member and is operated at a temperature such that the vaporized sodium condenses thereon. Returning means for returning the condensed sodium from the shell to the transporting means provides a continuous supply of liquid sodium to the transporting means. Also, there are first conducting means for conducting electric current from the transition piece which extends through the shell, and second conducting means for conducting electric current to the grid of the first cell which extends through the shell.

  10. Sealed Radioactive Source Accountability

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1991-12-24T23:59:59.000Z

    To establish Department of Energy (DOE) interim policy and to provide guidance for sealed radioactive source accountability. The directive does not cancel any directives. Extended by DOE N 5400.10 to 12-24-93 & Extended by DOE N 5400.12 to 12-24-94.

  11. Sealed Radioactive Source Accountability

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1994-12-22T23:59:59.000Z

    This Notice extends DOE N 5400.9, Sealed Radioactive Source Accountability, of 12-24-91, until 12-24-95, unless sooner superseded or rescinded. The contents of DOE N 5400.9 will be updated and incorporated in the revised DOE O 5480.11, Radiation Protection for Occupational Workers.

  12. Funding Source Agricultural

    E-Print Network [OSTI]

    Arnold, Jonathan

    Funding Source General Research Agricultural Experiment Station Instruction Public Service,145,610$ 3,716,162DEPARTMENT OF AGRICULTURE $ 1,799,873 $ 8,322,303 $ 30,128,910 $ 0$ 85,000$ 2,127 $ 0$ 4,920,977$ 0US DEPARTMENT OF AGRICULTURE / HATCH $ 0 $ 0 $ 4,920,977 $ 15,348,823FOUNDATION

  13. Selective ion source

    DOE Patents [OSTI]

    Leung, K.N.

    1996-05-14T23:59:59.000Z

    A ion source is described wherein selected ions maybe extracted to the exclusion of unwanted ion species of higher ionization potential. Also described is a method of producing selected ions from a compound, such as P{sup +} from PH{sub 3}. The invention comprises a plasma chamber, an electron source, a means for introducing a gas to be ionized by electrons from the electron source, means for limiting electron energy from the electron source to a value between the ionization energy of the selected ion species and the greater ionization energy of an unwanted ion specie, and means for extracting the target ion specie from the plasma chamber. In one embodiment, the electrons are generated in a plasma cathode chamber immediately adjacent to the plasma chamber. A small extractor draws the electrons from the plasma cathode chamber into the relatively positive plasma chamber. The energy of the electrons extracted in this manner is easily controlled. The invention is particularly useful for doping silicon with P{sup +}, As{sup +}, and B{sup +} without the problematic presence of hydrogen, helium, water, or carbon oxide ions. Doped silicon is important for manufacture of semiconductors and semiconductor devices. 6 figs.

  14. Selective ion source

    DOE Patents [OSTI]

    Leung, Ka-Ngo (Hercules, CA)

    1996-01-01T23:59:59.000Z

    A ion source is described wherein selected ions maybe extracted to the exclusion of unwanted ion species of higher ionization potential. Also described is a method of producing selected ions from a compound, such as P.sup.+ from PH.sub.3. The invention comprises a plasma chamber, an electron source, a means for introducing a gas to be ionized by electrons from the electron source, means for limiting electron energy from the electron source to a value between the ionization energy of the selected ion species and the greater ionization energy of an unwanted ion specie, and means for extracting the target ion specie from the plasma chamber. In one embodiment, the electrons are generated in a plasma cathode chamber immediately adjacent to the plasma chamber. A small extractor draws the electrons from the plasma cathode chamber into the relatively positive plasma chamber. The energy of the electrons extracted in this manner is easily controlled. The invention is particularly useful for doping silicon with P.sup.+, AS.sup.+, and B.sup.+ without the problematic presence of hydrogen, helium, water, or carbon oxide ions. Doped silicon is important for manufacture of semiconductors and semiconductor devices.

  15. Detecting Illicit Radioactive Sources

    SciTech Connect (OSTI)

    McDonald, Joseph C.; Coursey, Bert; Carter, Michael

    2004-11-01T23:59:59.000Z

    Specialized instruments have been developed to detect the presence of illicit radioactive sources that may be used by terrorists in radiation dispersal devices, so-called ''dirty bombs'' or improvised nuclear devices. This article discusses developments in devices to detect and measure radiation.

  16. Regional Report Issue Paper

    E-Print Network [OSTI]

    Regional Report Introduction The economy of the United States is more than three and one-half years accounting for both increasing shares of the economy and of recessionary employment losses. Manufacturing, driven by globalization and advancing information technology. Recoveries now produce jobs new

  17. Quantum key distribution with entangled photon sources

    E-Print Network [OSTI]

    Xiongfeng Ma; Chi-Hang Fred Fung; Hoi-Kwong Lo

    2007-03-14T23:59:59.000Z

    A parametric down-conversion (PDC) source can be used as either a triggered single photon source or an entangled photon source in quantum key distribution (QKD). The triggering PDC QKD has already been studied in the literature. On the other hand, a model and a post-processing protocol for the entanglement PDC QKD are still missing. In this paper, we fill in this important gap by proposing such a model and a post-processing protocol for the entanglement PDC QKD. Although the PDC model is proposed to study the entanglement-based QKD, we emphasize that our generic model may also be useful for other non-QKD experiments involving a PDC source. Since an entangled PDC source is a basis independent source, we apply Koashi-Preskill's security analysis to the entanglement PDC QKD. We also investigate the entanglement PDC QKD with two-way classical communications. We find that the recurrence scheme increases the key rate and Gottesman-Lo protocol helps tolerate higher channel losses. By simulating a recent 144km open-air PDC experiment, we compare three implementations -- entanglement PDC QKD, triggering PDC QKD and coherent state QKD. The simulation result suggests that the entanglement PDC QKD can tolerate higher channel losses than the coherent state QKD. The coherent state QKD with decoy states is able to achieve highest key rate in the low and medium-loss regions. By applying Gottesman-Lo two-way post-processing protocol, the entanglement PDC QKD can tolerate up to 70dB combined channel losses (35dB for each channel) provided that the PDC source is placed in between Alice and Bob. After considering statistical fluctuations, the PDC setup can tolerate up to 53dB channel losses.

  18. Department of Basic Sciences Philadelphia University Module Syllabus

    E-Print Network [OSTI]

    Department of Basic Sciences ­ Philadelphia University Module Syllabus: Course Title: Computational

  19. Apparatus and processes for the mass production of photovotaic modules

    DOE Patents [OSTI]

    Barth, Kurt L. (1205 W. Elizabeth #E164, Fort Collins, CO 80521); Enzenroth, Robert A. (112 Rutgers #203, Fort Collins, CO 80525); Sampath, Walajabad S. (1612 Faraday Cir., Fort Collins, CO 80525)

    2002-07-23T23:59:59.000Z

    An apparatus and processes for large scale inline manufacturing of CdTe photovoltaic modules in which all steps, including rapid substrate heating, deposition of CdS, deposition of CdTe, CdCl.sub.2 treatment, and ohmic contact formation, are performed within a single vacuum boundary at modest vacuum pressures. A p+ ohmic contact region is formed by subliming a metal salt onto the CdTe layer. A back electrode is formed by way of a low cost spray process, and module scribing is performed by means of abrasive blasting or mechanical brushing through a mask. The vacuum process apparatus facilitates selective heating of substrates and films, exposure of substrates and films to vapor with minimal vapor leakage, deposition of thin films onto a substrate, and stripping thin films from a substrate. A substrate transport apparatus permits the movement of substrates into and out of vacuum during the thin film deposition processes, while preventing the collection of coatings on the substrate transport apparatus itself.

  20. Apparatus and processes for the mass production of photovoltaic modules

    DOE Patents [OSTI]

    Barth, Kurt L. (Ft. Collins, CO); Enzenroth, Robert A. (Fort Collins, CO); Sampath, Walajabad S. (Fort Collins, CO)

    2007-05-22T23:59:59.000Z

    An apparatus and processes for large scale inline manufacturing of CdTe photovoltaic modules in which all steps, including rapid substrate heating, deposition of CdS, deposition of CdTe, CdCl.sub.2 treatment, and ohmic contact formation, are performed within a single vacuum boundary at modest vacuum pressures. A p+ ohmic contact region is formed by subliming a metal salt onto the CdTe layer. A back electrode is formed by way of a low cost spray process, and module scribing is performed by means of abrasive blasting or mechanical brushing through a mask. The vacuum process apparatus facilitates selective heating of substrates and films, exposure of substrates and films to vapor with minimal vapor leakage, deposition of thin films onto a substrate, and stripping thin films from a substrate. A substrate transport apparatus permits the movement of substrates into and out of vacuum during the thin film deposition processes, while preventing the collection of coatings on the substrate transport apparatus itself.