Sample records for module reads exogenously

  1. Approved Module Information for EE4017, 2014/5 Module Title/Name: Realtime Communication Networks Module Code: EE4017

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Module Code: EE4017 School: Engineering and Applied Science Module Type: Standard Module New Module development #12;Indicative Module Content: Telecommunication systems: Network structures; national & Teaching Rationale: Lectures, tutorials and directed reading. Module Assessment Methods of Assessment

  2. Approved Module Information for LT1312, 2014/5 Module Title/Name: Literature Review Project Module Code: LT1312

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: LT1312 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Rationale: Lectures/tutorials Guided reading according to issue chosen Module Assessment MethodsApproved Module Information for LT1312, 2014/5 Module Title/Name: Literature Review Project Module

  3. Approved Module Information for CS4840, 2014/5 Module Title/Name: Software Architecture Module Code: CS4840

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : CS4840 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module, directed reading, formative assignments, practical project-based work Module Assessment MethodsApproved Module Information for CS4840, 2014/5 Module Title/Name: Software Architecture Module Code

  4. Approved Module Information for CS3460, 2014/5 Module Title/Name: Enterprise Computing Strategies Module Code: CS3460

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    involving case studies. Tutorials and practical work involving case studies. Module Assessment Methods Module Code: CS3460 School: Engineering and Applied Science Module Type: Standard Module New Module and tutorials,supported by appropriate reading. Lectures and directed reading. Tutorials, and practical work

  5. Optimal combined wind power forecasts using exogeneous variables

    E-Print Network [OSTI]

    Optimal combined wind power forecasts using exogeneous variables Fannar ¨Orn Thordarson Kongens of the thesis is combined wind power forecasts using informations from meteorological forecasts. Lyngby, January

  6. Approved Module Information for CH3102, 2014/5 Module Title/Name: Advances in Biomaterials Science Module Code: CH3102

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for CH3102, 2014/5 Module Title/Name: Advances in Biomaterials Science Module Code: CH3102 School: Engineering and Applied Science Module Type: Standard Module New Module of lectures, directed reading and tutorial support Module Assessment Methods of Assessment & associated

  7. Approved Module Information for CH1102, 2014/5 Module Title/Name: Organic Chemistry I Module Code: CH1102

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : CH1102 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module of Delivery Learning Hours Lecture: 12 hours Tutorial: 2 hours Lab Session: 16 hours Independent Study: 70 reading, tutorial support, supervised laboratory sessions Module Assessment Methods of Assessment

  8. Bullet trains and steam engines: Exogenous attention zips but endogenous attention chugs along

    E-Print Network [OSTI]

    VanRullen, Rufin

    Bullet trains and steam engines: Exogenous attention zips but endogenous attention chugs along: Chakravarthi, R., & VanRullen, R. (2011). Bullet trains and steam engines: Exogenous attention zips

  9. Approved Module Information for CS2160, 2014/5 Module Title/Name: Professional Aspects of Computing Module Code: CS2160

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Module Code: CS2160 School: Engineering and Applied Science Module Type: Standard Module New Module and tutorials Additional directed reading on specific case studies Module Assessment Methods of Assessment the module. December/January Exam Closed Book 2:00hrs - 80% Details - #12;Total: 100% Method of Submission

  10. Approved Module Information for CE1102, 2014/5 Module Title/Name: Organic Chemistry for Engineers Module Code: CE1102

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Module Code: CE1102 School: Engineering and Applied Science Module Type: Standard Module New Module of Delivery Learning Hours Lecture: 12 hours Tutorial: 2 hours Lab Session: 8 hours Independent Study: 80 reading, tutorial support and supervised laboratory sessions. Module Assessment Methods of Assessment

  11. Exogenous and endogenous risk factors management to predict surrender behaviours

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    ;surrender value; which is nothing else than the sum of earned premiums, potentially reduced by contractualExogenous and endogenous risk factors management to predict surrender behaviours Xavier Milhaud is dedicated to surrender risk management), strengthens the necessity to deeply study and understand this risk

  12. FUNCTIONAL NEUROIMAGING STUDIES OF READING AND READING DISABILITY

    E-Print Network [OSTI]

    FUNCTIONAL NEUROIMAGING STUDIES OF READING AND READING DISABILITY (DEVELOPMENTAL DYSLEXIA) Kenneth in develop- mental dyslexia. Reading disabled readers, relative to nonimpaired readers, demonstrate Reviews 2000;6:207­213. Key Words: dyslexia; neuroimaging; reading; lexical processing; phonol- ogy R

  13. Critical Reading School COMSC

    E-Print Network [OSTI]

    Martin, Ralph R.

    Critical Reading School COMSC To become an effective researcher requires the ability to rapidly this is to read and critique relevant academic and scientific materials. The means by which these materials are accessed has changed dramatically over recent years, but the core skills of critical reading remain

  14. Introducing a digital library reading appliance into a reading group

    E-Print Network [OSTI]

    Marshall, Cathy

    Introducing a digital library reading appliance into a reading group Catherine C. Marshall, Morgan will we read digital library materials? This paper describes the reading practices of an on-going reading group, and how these practices changed when we introduced XLibris, a digital library reading appliance

  15. Effect of exogenous prolactin on plasma luteinizing hormone levels in ovariectomized cows

    E-Print Network [OSTI]

    Forrest, David Wayne

    1976-01-01T23:59:59.000Z

    EFFECT OF EXOGENOUS PROLACTIN ON PLASMA LUTEINIZING HORMONE LEVELS IN OVARIECTOMIZEO COWS A Thesis by David Wayne Footrest Approved as to style and content by: airman of Committee Hea of epartme t Member Mem P Member August 1976... ABSTRACT Effect of Exogenous Prolactin on Plasma Luteinizing Hormone Levels in Ovariectomized Cows. (August 1976) David Wayne Forrest, B. S. , Abilene Christian College Cha1rman of Advisory Committee; Dr. P. G. Harms The effect of exogenous prolact1n...

  16. Contracting with reading costs and renegotiation costs

    E-Print Network [OSTI]

    Brennan, James R.

    2007-01-01T23:59:59.000Z

    Reading Costs, Competition, and ContractReading Costs . . . . . . . . . . . . . . . . C. EquilibriumUnconscionability A?ect Reading Costs . . . . . . . . . .

  17. Peter Sparks Compass Reading

    E-Print Network [OSTI]

    Robertson, Stephen

    Peter Sparks Compass Reading You could I never love. Built of a bulk beyond my comprehension compass with its swinging fleur-de-lys watched by the crystal prism's sharp-cut eye? It represented

  18. Barium Titanate Nanoparticles as Exogenous Contrast Agents in Second Harmonic Optical Coherence Tomography

    E-Print Network [OSTI]

    Pearson, Jeremy T

    2013-05-06T23:59:59.000Z

    I propose and demonstrate a method by which barium titanate nanoparticle clusters can be used as exogenous contrast agents in Second Harmonic Optical Coherence Tomography imaging systems to localize and highlight desired regions of tissue. SH...

  19. Approved 10-06 Clemson University: Master of Education in Reading

    E-Print Network [OSTI]

    Stuart, Steven J.

    coursework. II. Reading Teacher & Reading Consultant certifications + Reading Recovery Training Organizing and Supervising Reading Programs 3 hours READ 864 Teaching Secondary School Reading 3 hours READ Plan II. Reading Recovery Teacher, Reading Teacher & Reading Consultant READ 880 Reading Recovery

  20. IE 361 Module 12 EFC and SPM: One Thing Control Charting is Not

    E-Print Network [OSTI]

    Vardeman, Stephen B.

    , by EE's and ME's) and "SPC." Recall from Module 10 the basic insight that Shewhart "control chartingIE 361 Module 12 EFC and SPM: One Thing Control Charting is Not Reading: Section 3.6 of Statistical Vardeman and Morris (Iowa State University) IE 361 Module 12 1 / 11 #12;EFC and SPC In this short module

  1. Reading Arendt in Iran/Reading Iran through Arendt: Speech,

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    Reading Arendt in Iran/Reading Iran through Arendt: Speech, Action, and the Question Arendt in Iran/Reading Iran through Arendt: Speech, Action, and the Question of Street Politics for Arendt readers in the postrevolutionary context of the Islamic Republic of Iran. Arendt's skepticism

  2. Module Configuration

    DOE Patents [OSTI]

    Oweis, Salah (Ellicott City, MD); D'Ussel, Louis (Bordeaux, FR); Chagnon, Guy (Cockeysville, MD); Zuhowski, Michael (Annapolis, MD); Sack, Tim (Cockeysville, MD); Laucournet, Gaullume (Paris, FR); Jackson, Edward J. (Taneytown, MD)

    2002-06-04T23:59:59.000Z

    A stand alone battery module including: (a) a mechanical configuration; (b) a thermal management configuration; (c) an electrical connection configuration; and (d) an electronics configuration. Such a module is fully interchangeable in a battery pack assembly, mechanically, from the thermal management point of view, and electrically. With the same hardware, the module can accommodate different cell sizes and, therefore, can easily have different capacities. The module structure is designed to accommodate the electronics monitoring, protection, and printed wiring assembly boards (PWAs), as well as to allow airflow through the module. A plurality of modules may easily be connected together to form a battery pack. The parts of the module are designed to facilitate their manufacture and assembly.

  3. The effects of an exogenous gonadotropin and gamma irradiation on mice testes

    E-Print Network [OSTI]

    Flournoy, Robert Wilson

    1961-01-01T23:59:59.000Z

    THE EFFECTS OF AN EXOGENOUS GONADOTROPIN AND GAMMA IRRADIATION ON MICE TESTES A Thesis ROBERT O'ILSON FLOURNOY Subxuitted to the Graduate School of the Agricultural and Mechanical College of Texas in partial fulfillxrent of the rexluirexrents... for the degree of MASTER OF SCIENCE August, I 96l Major Subject: Zoology THE EFFECTS OF AN EXOGENOUS GONADOTROFIN AND GAIviMA IRRADIATION ON IdICE TESTES A Thesis ROI3EBT WILSON FLOURNQY Approved as to style and content by: . '), 1g'i (Chairn. an Con...

  4. WIPP - Public Reading Facilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening aTurbulenceUtilizeRural Public Reading Facilities/Electronic

  5. Effect of continuous exposure to exogenous ethylene during cold storage on postharvest decay development and quality

    E-Print Network [OSTI]

    Crisosto, Carlos H.

    Effect of continuous exposure to exogenous ethylene during cold storage on postharvest decay benefit could be expected from actively removing ethylene from cold storage rooms or transport containers million) induces flesh soft- ening, limiting long-term cold storage (Mitchell, 1990). Recently, Wills et

  6. Effects of exogenous carbon monoxide on radiation-induced bystander effect in zebrafish embryos in vivo

    E-Print Network [OSTI]

    Yu, K.N.

    -no-threshed (LNT) model widely accepted for radiation protection saying that biological effects caused by ionizingEffects of exogenous carbon monoxide on radiation-induced bystander effect in zebrafish embryos) on the radiation induced bystander effect (RIBE) in vivo between embryos of the zebrafish was studied. RIBE

  7. Effects of exogenous ABA on photosynthesis and stomatal conductance of cut twigs from oak seedlings

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Effects of exogenous ABA on photosynthesis and stomatal conductance of cut twigs from oak seedlings of the observed decline in net photosynthesis (Downton etal., 1988) or is there some direct ef- fect of ABA on mesophyll photosynthesis (Raschke and Hedrich, 1985)? Do forest trees display the same responses to ABA

  8. Exogenously cued attention triggers competitive selection of surfaces John H. Reynolds *,1

    E-Print Network [OSTI]

    Reynolds, John H.

    blink 1. Introduction Valdes-Sosa, Cobo, and Pinilla (2000) recently introduced an ingenious paradigm was observed when delayed onset of one surface was used as an exogenous cue. Thus, in Valdes-SosaÃ?s original from the McKnight Foundation, the F.M. Kirby Foundation, Inc. and the Fritz B. Burns Foundation. 2

  9. VME Data Acquisition Modules for MINERvA Experiment

    SciTech Connect (OSTI)

    Baldin, B.; /fermilab

    2010-01-01T23:59:59.000Z

    This document describes two VME modules developed for MINERvA experiment at Fermilab. The Chain ReadOut Controller (CROC) module has four serial data channels and can interface with up to 48 front-ends using standard CAT5e networking cable. The data transmission rate of each channel is 160 Mbit/s. The maximum data transmission rate via VME bus is {approx}18 MB/s. The Chain Readout Interface Module (CRIM) is designed to provide various interface functions for the CROC module. It is compatible with MINOS MTM timing module and can be used to distribute timing signals to four CROC modules. The CRIM module also has a data port compatible with the CROC serial data interface. The data port can be used for diagnostic purpose and can generate triggers from front-end events. The CRIM module is a standard D08(O) interrupter module.

  10. Reading Acquisition, Developmental Dyslexia, and Skilled Reading Across Languages: A Psycholinguistic Grain Size Theory

    E-Print Network [OSTI]

    Port, Robert

    Reading Acquisition, Developmental Dyslexia, and Skilled Reading Across Languages representations and accompanying differences in developmental reading strategies and the manifestation of dyslexia

  11. International House Collection / Stanley Read (collector)

    E-Print Network [OSTI]

    Handy, Todd C.

    International House Collection / Stanley Read (collector) Revised by Erwin Wodarczak (2010 (collector). - 1953-1955. 2 cm of textual records. Biographical Sketch Born in Quebec, Stanley Read earned

  12. Exogenous ochronosis

    E-Print Network [OSTI]

    Nagler, Arielle; Hale, Christopher S; Meehan, Shane A; Leger, Marie

    2015-01-01T23:59:59.000Z

    cream inhibited tyrosinase, but higher concentrationscream activated tyrosinase and increased melanin synthesis [

  13. Thermionic modules

    DOE Patents [OSTI]

    King, Donald B. (Albuquerque, NM); Sadwick, Laurence P. (Salt Lake City, UT); Wernsman, Bernard R. (Clairton, PA)

    2002-06-18T23:59:59.000Z

    Modules of assembled microminiature thermionic converters (MTCs) having high energy-conversion efficiencies and variable operating temperatures manufactured using MEMS manufacturing techniques including chemical vapor deposition. The MTCs incorporate cathode to anode spacing of about 1 micron or less and use cathode and anode materials having work functions ranging from about 1 eV to about 3 eV. The MTCs also exhibit maximum efficiencies of just under 30%, and thousands of the devices and modules can be fabricated at modest costs.

  14. Setup, tests and results for the ATLAS TileCal Read Out Driver production

    E-Print Network [OSTI]

    Valero, Alberto; Castillo, V; Cuenca, C; Ferrer, A; Fullana, E; González, V; Higón, E; Munar, A; Poveda, J; Ruiz-Martínez, A; Salvachúa, B; Sanchís, E; Solans, C; Soret, J; Torres, J; Valls, J A

    2007-01-01T23:59:59.000Z

    In this paper we describe the performance and test results of the production of the 38 ATLAS TileCal Read Out Drivers (RODs). We first describe the basic hardware specifications and firmware functionality of the modules, the test-bench setup used for production and the test procedure to qualify the boards. We then finally show and discuss the performance results.

  15. Thermoelectric module

    DOE Patents [OSTI]

    Kortier, William E. (Columbus, OH); Mueller, John J. (Columbus, OH); Eggers, Philip E. (Columbus, OH)

    1980-07-08T23:59:59.000Z

    A thermoelectric module containing lead telluride as the thermoelectric mrial is encapsulated as tightly as possible in a stainless steel canister to provide minimum void volume in the canister. The lead telluride thermoelectric elements are pressure-contacted to a tungsten hot strap and metallurgically bonded at the cold junction to iron shoes with a barrier layer of tin telluride between the iron shoe and the p-type lead telluride element.

  16. Brain Bases of Reading Fluency in Typical Reading and Impaired Fluency in Dyslexia

    E-Print Network [OSTI]

    Christodoulou, Joanna

    Although the neural systems supporting single word reading are well studied, there are limited direct comparisons between typical and dyslexic readers of the neural correlates of reading fluency. Reading fluency deficits ...

  17. Photovoltaic module and module arrays

    DOE Patents [OSTI]

    Botkin, Jonathan (El Cerrito, CA); Graves, Simon (Berkeley, CA); Lenox, Carl J. S. (Oakland, CA); Culligan, Matthew (Berkeley, CA); Danning, Matt (Oakland, CA)

    2012-07-17T23:59:59.000Z

    A photovoltaic (PV) module including a PV device and a frame. The PV device has a PV laminate defining a perimeter and a major plane. The frame is assembled to and encases the laminate perimeter, and includes leading, trailing, and side frame members, and an arm that forms a support face opposite the laminate. The support face is adapted for placement against a horizontal installation surface, to support and orient the laminate in a non-parallel or tilted arrangement. Upon final assembly, the laminate and the frame combine to define a unitary structure. The frame can orient the laminate at an angle in the range of 3.degree.-7.degree. from horizontal, and can be entirely formed of a polymeric material. Optionally, the arm incorporates integral feature(s) that facilitate interconnection with corresponding features of a second, identically formed PV module.

  18. Photovoltaic module and module arrays

    DOE Patents [OSTI]

    Botkin, Jonathan; Graves, Simon; Lenox, Carl J. S.; Culligan, Matthew; Danning, Matt

    2013-08-27T23:59:59.000Z

    A photovoltaic (PV) module including a PV device and a frame, The PV device has a PV laminate defining a perimeter and a major plane. The frame is assembled to and encases the laminate perimeter, and includes leading, trailing, and side frame members, and an arm that forms a support face opposite the laminate. The support face is adapted for placement against a horizontal installation surface, to support and orient the laminate in a non-parallel or tilted arrangement. Upon final assembly, the laminate and the frame combine to define a unitary structure. The frame can orient the laminate at an angle in the range of 3.degree.-7.degree. from horizontal, and can be entirely formed of a polymeric material. Optionally, the arm incorporates integral feature(s) that facilitate interconnection with corresponding features of a second, identically formed PV module.

  19. Supported PV module assembly

    DOE Patents [OSTI]

    Mascolo, Gianluigi; Taggart, David F.; Botkin, Jonathan D.; Edgett, Christopher S.

    2013-10-15T23:59:59.000Z

    A supported PV assembly may include a PV module comprising a PV panel and PV module supports including module supports having a support surface supporting the module, a module registration member engaging the PV module to properly position the PV module on the module support, and a mounting element. In some embodiments the PV module registration members engage only the external surfaces of the PV modules at the corners. In some embodiments the assembly includes a wind deflector with ballast secured to a least one of the PV module supports and the wind deflector. An array of the assemblies can be secured to one another at their corners to prevent horizontal separation of the adjacent corners while permitting the PV modules to flex relative to one another so to permit the array of PV modules to follow a contour of the support surface.

  20. Effect of exogenous electron shuttles on growth and fermentative metabolism in Clostridium sp. BC1

    SciTech Connect (OSTI)

    Yarlagadda V. N.; Francis A.; Gupta, A.; Dodge, C. J.

    2012-03-01T23:59:59.000Z

    In this study, the influence exogenous electron shuttles on the growth and glucose fermentative metabolism of Clostridium sp. BC1 was investigated. Bicarbonate addition to mineral salts (MS) medium accelerated growth and glucose fermentation which shifted acidogenesis (acetic- and butyric-acids) towards solventogenesis (ethanol and butanol). Addition of ferrihydrite, anthraquinone disulfonate, and nicotinamide adenine dinucleotide in bicarbonate to growing culture showed no significant influence on fermentative metabolism. In contrast, methyl viologen (MV) enhanced ethanol- and butanol-production by 28- and 12-fold, respectively with concomitant decrease in hydrogen, acetic- and butyric-acids compared to MS medium. The results show that MV addition affects hydrogenase activity with a significant reduction in hydrogen production and a shift in the direction of electron flow towards enhanced production of ethanol and butanol.

  1. Reading File Bonneville Power Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Radiation ProtectionRaising funds forAdvancedAdvancedReading File

  2. Serial blood pressure measurements and exogenous creatinine clearance rates in partially nephrectomized dogs: the effect of dietary sodium intake

    E-Print Network [OSTI]

    Greco, Deborah Susan

    1987-01-01T23:59:59.000Z

    13 Arterial Blood Pressure Studies. . . 14 Exogenous Creatinine Clearance. 2g Serum Creatinine and Urea Nitrogen Concentrations. . Urinalysis and Urine Bacteriologic Studies. . . . . . . . . Other Laboratory Tests. 32 36 40 Pathologic Studies.... . 40 IV DISCUSSION. 49 Blood Pressure. 49 Glomerular Filtration Rates. Urinalysis and Urine Bacteriologic Studies. . Serum Urea Nitrogen and Serum Creatinine. . . . 60 62 65 Hematologic Studies. . . Necropsy 66 66 vi I Chapter V...

  3. Ballasted photovoltaic module and module arrays

    DOE Patents [OSTI]

    Botkin, Jonathan (El Cerrito, CA); Graves, Simon (Berkeley, CA); Danning, Matt (Oakland, CA)

    2011-11-29T23:59:59.000Z

    A photovoltaic (PV) module assembly including a PV module and a ballast tray. The PV module includes a PV device and a frame. A PV laminate is assembled to the frame, and the frame includes an arm. The ballast tray is adapted for containing ballast and is removably associated with the PV module in a ballasting state where the tray is vertically under the PV laminate and vertically over the arm to impede overt displacement of the PV module. The PV module assembly can be installed to a flat commercial rooftop, with the PV module and the ballast tray both resting upon the rooftop. In some embodiments, the ballasting state includes corresponding surfaces of the arm and the tray being spaced from one another under normal (low or no wind) conditions, such that the frame is not continuously subjected to a weight of the tray.

  4. Read: The Happiness of Pursuit

    E-Print Network [OSTI]

    Fineprint Bookclub

    2008-01-01T23:59:59.000Z

    from both India and China. Nothing empowers a person as much as a weapon. With the cue derived from the Maoists’ success in mobilizing the masses by giving them guns, a national campaign to empower the downtrodden by providing military training... another of his book, My Name is Red. I don’t drink and smoke, but I am hopelessly addicted to books and audio cassettes/cds. However, I don’t seem to fi nd enough time to read these days. In the past, I had ample free time but little money to buy...

  5. Reading Room | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you sure you wantJoin us for| Department ofRightsSmart SensorsHeatingReading

  6. WELCOME TO THE ELECTRONIC RESERVES COURSE READINGS

    E-Print Network [OSTI]

    Shrader-Frechette, Kristin

    WELCOME TO THE ELECTRONIC RESERVES COURSE READINGS NOTE: THIS MATERIAL MAY BE PROTECTED animals--ingesting food, digesting it, assimilating it, excreting waste, reproducing, and being mobile

  7. MEASURING THE READING ABILITY OF INCOMING FRESHMEN: A PATH ANALYSIS INVESTIGATION INTO READING COMPREHENSION

    E-Print Network [OSTI]

    Schuster, Jonathan

    2012-05-31T23:59:59.000Z

    Reading is a complex process involving numerous skills and abilities contributing to acquiring meaning from text. Individuals without the requisite reading skills will have difficulty not only in school but throughout their ...

  8. Tracking Reading: Dual Task Costs of Oral Reading for Young Versus Older Adults

    E-Print Network [OSTI]

    Kemper, Susan; Bontempo, Daniel; Schmalzried, RaLynn Cheri; McKedy, Whitney; Tagliaferri, Bruno; Kieweg, Doug

    2014-02-01T23:59:59.000Z

    A digital pursuit rotor was used to monitor oral reading costs by time-locking tracking performance to the auditory wave form produced as young and older adults were reading out short paragraphs. Multilevel modeling was ...

  9. Designing a Multi-Slate Reading Environment to Support Active Reading Activities

    E-Print Network [OSTI]

    Keinan, Alon

    Designing a Multi-Slate Reading Environment to Support Active Reading Activities NICHOLAS CHEN of reading device consisting of an interconnected environment of thin and lightweight electronic slates could and construction of such a system. In it, we explain how data should be mapped to slates, detail interactions

  10. The effects of exogenously administered pineal gland extract and melatonin on some reproductive aspects in the albino rat

    E-Print Network [OSTI]

    Hernandez-Perez, Milton John

    1967-01-01T23:59:59.000Z

    THE EFFECTS OF EXOGENOUSLY ADMINISTERED PINEAL GLAND EXTRACT AND MELATONIN ON SOME REPRODUCTIVE ASPECTS IN THE ALBINO RAT A Thesis by MILTON J. HERNANDEZ-PEREZ Submitted to the Graduate College of the Texas A&M University in partial... by MILTON J. HERNANDEZ-PEREZ Approved as to style and content by: (Chairman o'f Committee) (Head of Department) (Member) (Member) (Member) May 1967 ACKNOWLEDGEHENTS I sincerely thank Dr. George M. Krise, Dr. Sidney 0. Brown, and Dr. H. R. Crookshank...

  11. Reading for Thursday Emissions scenario summary

    E-Print Network [OSTI]

    Schweik, Charles M.

    emissions, for year 2000 #12;USA ­ CO2 emissions from fossil fuel combustion (2005) US EPA #12;#12;#12;Decreasing 13C strongly suggests that the source of atmospheric CO2 is fossil carbon #12;Line of evidence #1Reading for Thursday · Emissions scenario summary: ­ Read pages 3-6 · IPCC Chapter 11 (Regional

  12. Module Handbook Specialisation Photovoltaics

    E-Print Network [OSTI]

    Habel, Annegret

    Module Handbook Specialisation Photovoltaics 2nd Semester for the Master Programme REMA/EUREC Course 2008/2009 University of Northumbria Specialisation Provider: Photovoltaics #12;Specialisation Photovoltaics, University of Northumbria Module 1/Photovoltaics: PHOTOVOLTAIC CELL

  13. Modulating lignin in plants

    DOE Patents [OSTI]

    Apuya, Nestor; Bobzin, Steven Craig; Okamuro, Jack; Zhang, Ke

    2013-01-29T23:59:59.000Z

    Materials and methods for modulating (e.g., increasing or decreasing) lignin content in plants are disclosed. For example, nucleic acids encoding lignin-modulating polypeptides are disclosed as well as methods for using such nucleic acids to generate transgenic plants having a modulated lignin content.

  14. Exogenous Oil Supply Shocks: How Big Are They and How Much Do They Matter for the U.S. Economy?” forthcoming: Review of Economics and Statistics

    E-Print Network [OSTI]

    Lutz Kilian

    2008-01-01T23:59:59.000Z

    Abstract: Since the oil crises of the 1970s there has been strong interest in the question of how oil production shortfalls caused by wars and other exogenous political events in OPEC countries affect oil prices, U.S. real GDP growth and U.S. CPI inflation. This study focuses on the modern OPEC period since 1973. The results differ from the conventional wisdom along a number of dimensions. First, it is shown that under reasonable assumptions the timing, magnitude and even the sign of exogenous oil supply shocks may differ greatly from current state-of-the-art estimates. Second, the common view that the case for the exogeneity of at least the major oil price shocks is strong is supported by the data for the 1980/81 and 1990/91 oil price shocks, but not for other oil price shocks. Notably, statistical measures of the net oil price increase relative to the recent past do not represent the exogenous component of oil prices. In fact, only a small fraction of the observed oil price increases during crisis periods can be attributed to exogenous oil production disruptions. Third, compared to previous indirect estimates of the effects of exogenous supply disruptions on real GDP growth that treated major oil price increases as exogenous, the direct estimates obtained in this paper suggest a sharp drop after five quarters rather than an immediate and sustained reduction in economic growth for a year. They also suggest a spike in CPI inflation three quarters after the exogenous oil supply shock rather than a sustained increase in inflation, as is sometimes conjectured. Finally, the results of this paper put into perspective the importance of exogenous oil production shortfalls in the Middle East. It is shown that exogenous oil supply shocks made remarkably little difference overall for the evolution of U.S. real GDP growth and CPI inflation since the 1970s, although they did matter for some historical episodes. Key Words: Oil shock; war; counterfactual; oil supply; exogeneity; weak instruments. JEL: E32, C32.

  15. Pulse width modulation inverter with battery charger

    DOE Patents [OSTI]

    Slicker, James M. (Union Lake, MI)

    1985-01-01T23:59:59.000Z

    An inverter is connected between a source of DC power and a three-phase AC induction motor, and a microprocessor-based circuit controls the inverter using pulse width modulation techniques. In the disclosed method of pulse width modulation, both edges of each pulse of a carrier pulse train are equally modulated by a time proportional to sin .theta., where .theta. is the angular displacement of the pulse center at the motor stator frequency from a fixed reference point on the carrier waveform. The carrier waveform frequency is a multiple of the motor stator frequency. The modulated pulse train is then applied to each of the motor phase inputs with respective phase shifts of 120.degree. at the stator frequency. Switching control commands for electronic switches in the inverter are stored in a random access memory (RAM) and the locations of the RAM are successively read out in a cyclic manner, each bit of a given RAM location controlling a respective phase input of the motor. The DC power source preferably comprises rechargeable batteries and all but one of the electronic switches in the inverter can be disabled, the remaining electronic switch being part of a "flyback" DC-DC converter circuit for recharging the battery.

  16. The Effects of Rhetorical Reading Interventions on the Reading and Writing Performances of Students Enrolled in College Composition Classes

    E-Print Network [OSTI]

    Sanchez, Bernice Y.

    2011-02-22T23:59:59.000Z

    -experimental comparison and treatment group post test design that included four composition classes. The independent variable was the rhetorical reading intervention. The dependent variables included: student reading- writing connection surveys, the Accuplacer Reading...

  17. Quantum Reading of Unitary Optical Devices

    E-Print Network [OSTI]

    Michele Dall'Arno; Alessandro Bisio; Giacomo Mauro D'Ariano

    2015-02-20T23:59:59.000Z

    We address the problem of quantum reading of optical memories, namely the retrieving of classical information stored in the optical properties of a media with minimum energy. We present optimal strategies for ambiguous and unambiguous quantum reading of unitary optical memories, namely when one's task is to minimize the probability of errors in the retrieved information and when perfect retrieving of information is achieved probabilistically, respectively. A comparison of the optimal strategy with coherent probes and homodyne detection shows that the former saves orders of magnitude of energy when achieving the same performances. Experimental proposals for quantum reading which are feasible with present quantum optical technology are reported.

  18. Distinct regions of right temporo-parietal junction are selective for theory of mind and exogenous attention

    E-Print Network [OSTI]

    Triantafyllou, Christina

    In functional magnetic resonance imaging (fMRI) studies, a cortical region in the right temporo-parietal junction (RTPJ) is recruited when participants read stories about people's thoughts (‘Theory of Mind’). Both fMRI and ...

  19. De Novo Sequencing with Short Reads: Does the Read Length Matter? (2009 JGI User Meeting)

    ScienceCinema (OSTI)

    Pezner, Pavel A

    2011-04-25T23:59:59.000Z

    Pavel Pevzner of UC San Diego spoke about "De Novo Sequencing with Short Reads" on March 26, 2009 during the 4th Annual User Meeting

  20. Bracket for photovoltaic modules

    DOE Patents [OSTI]

    Ciasulli, John; Jones, Jason

    2014-06-24T23:59:59.000Z

    Brackets for photovoltaic ("PV") modules are described. In one embodiment, a saddle bracket has a mounting surface to support one or more PV modules over a tube, a gusset coupled to the mounting surface, and a mounting feature coupled to the gusset to couple to the tube. The gusset can have a first leg and a second leg extending at an angle relative to the mounting surface. Saddle brackets can be coupled to a torque tube at predetermined locations. PV modules can be coupled to the saddle brackets. The mounting feature can be coupled to the first gusset and configured to stand the one or more PV modules off the tube.

  1. FASTBUS Snoop Diagnostic Module

    SciTech Connect (OSTI)

    Walz, H.V.; Downing, R.

    1980-11-01T23:59:59.000Z

    Development of the FASTBUS Snoop Module, undertaken as part of the prototype program for the new interlaboratory data bus standard, is described. The Snoop Module resides on a FASTBUS crate segment and provides diagnostic monitoring and testing capability. Communication with a remote host computer is handled independent of FASTBUS through a serial link. The module consists of a high-speed ECL front-end to monitor and single-step FASTBUS cycles, a master-slave interface, and a control microprocessor with serial communication ports. Design details and performance specifications of the prototype module are reported. 9 figures, 1 table.

  2. Approved Module Information for CE4020, 2014/5 Module Title/Name: Advanced Mass Trasfer Module Code: CE4020

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : CE4020 School: Engineering and Applied Science Module Type: Standard Module New Module? No ModuleApproved Module Information for CE4020, 2014/5 Module Title/Name: Advanced Mass Trasfer Module Code Credits: 10 Module Management Information Module Leader Name Qingchun Yuan Email Address q

  3. Approved Module Information for CS1240, 2014/5 Module Title/Name: Internet Computing Module Code: CS1240

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : CS1240 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module and applications for working with them. Module Learning Outcomes: At the end of the module, students should be ableApproved Module Information for CS1240, 2014/5 Module Title/Name: Internet Computing Module Code

  4. Approved Module Information for LT1307, 2014/5 Module Title/Name: Principles of Economics Module Code: LT1307

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: LT1307 School: Engineering and Applied Science Module Type: Standard Module New Module? No ModuleApproved Module Information for LT1307, 2014/5 Module Title/Name: Principles of Economics Module Credits: 10 Module Management Information Module Leader Name David Carpenter Email Address d

  5. Approved Module Information for ME3039, 2014/5 Module Title/Name: Design Failure Analysis Module Code: ME3039

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: ME3039 School: Engineering and Applied Science Module Type: Standard Module New Module? No ModuleApproved Module Information for ME3039, 2014/5 Module Title/Name: Design Failure Analysis Module Credits: 10 Module Management Information Module Leader Name David Upton Email Address uptondp

  6. Approved Module Information for CS1320, 2014/5 Module Title/Name: Problem Solving Module Code: CS1320

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    1320 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module CreditsApproved Module Information for CS1320, 2014/5 Module Title/Name: Problem Solving Module Code: CS: 10 Module Management Information Module Leader Name Errol Thompson Email Address thompel1@aston

  7. Approved Module Information for LT3315, 2014/5 Module Title/Name: International Trade Law Module Code: LT3315

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: LT3315 School: Engineering and Applied Science Module Type: Standard Module New Module? No ModuleApproved Module Information for LT3315, 2014/5 Module Title/Name: International Trade Law Module Credits: 10 Module Management Information Module Leader Name David Carpenter Email Address d

  8. Approved Module Information for PH4705, 2014/5 Module Title/Name: Interprofessional Learning Module Code: PH4705

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: PH4705 School: Life and Health Sciences Module Type: Standard Module New Module? No ModuleApproved Module Information for PH4705, 2014/5 Module Title/Name: Interprofessional Learning Module Credits: 10 Module Management Information Module Leader Name Fiona Lacey Email Address f

  9. Approved Module Information for CS4810, 2014/5 Module Title/Name: Enterprise Computing Systems Module Code: CS4810

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Module Code: CS4810 School: Engineering and Applied Science Module Type: Standard Module New ModuleApproved Module Information for CS4810, 2014/5 Module Title/Name: Enterprise Computing Systems? No Module Credits: 15 Module Management Information Module Leader Name Albert Hai Zhuge Email Address zhugeh

  10. TacRead, or Tactile Readout Device, is a novel and affordable refreshable braille display. People with blindness perceive braille alphabets formed by

    E-Print Network [OSTI]

    Banerjee, Subhashis

    Read. It has been identified as a potential solution to the low-cost Braille display challenge modules have been developed, prototyped and tested. Efforts for fabrication of displays for large not only motivated and driven the process, but kept it pointed towards the right direction as well. About

  11. Membrane module assembly

    DOE Patents [OSTI]

    Kaschemekat, Jurgen (Palo Alto, CA)

    1994-01-01T23:59:59.000Z

    A membrane module assembly adapted to provide a flow path for the incoming feed stream that forces it into prolonged heat-exchanging contact with a heating or cooling mechanism. Membrane separation processes employing the module assembly are also disclosed. The assembly is particularly useful for gas separation or pervaporation.

  12. Module Safety Issues (Presentation)

    SciTech Connect (OSTI)

    Wohlgemuth, J.

    2012-02-01T23:59:59.000Z

    Description of how to make PV modules so that they are less likely to turn into safety hazards. Making modules inherently safer with minimum additional cost is the preferred approach for PV. Safety starts with module design to ensure redundancy within the electrical circuitry to minimize open circuits and proper mounting instructions to prevent installation related ground faults. Module manufacturers must control the raw materials and processes to ensure that that every module is built like those qualified through the safety tests. This is the reason behind the QA task force effort to develop a 'Guideline for PV Module Manufacturing QA'. Periodic accelerated stress testing of production products is critical to validate the safety of the product. Combining safer PV modules with better systems designs is the ultimate goal. This should be especially true for PV arrays on buildings. Use of lower voltage dc circuits - AC modules, DC-DC converters. Use of arc detectors and interrupters to detect arcs and open the circuits to extinguish the arcs.

  13. Membrane module assembly

    DOE Patents [OSTI]

    Kaschemekat, J.

    1994-03-15T23:59:59.000Z

    A membrane module assembly is described which is adapted to provide a flow path for the incoming feed stream that forces it into prolonged heat-exchanging contact with a heating or cooling mechanism. Membrane separation processes employing the module assembly are also disclosed. The assembly is particularly useful for gas separation or pervaporation. 2 figures.

  14. Photovoltaic module and interlocked stack of photovoltaic modules

    SciTech Connect (OSTI)

    Wares, Brian S.

    2014-09-02T23:59:59.000Z

    One embodiment relates to an arrangement of photovoltaic modules configured for transportation. The arrangement includes a plurality of photovoltaic modules, each photovoltaic module including a frame. A plurality of individual male alignment features and a plurality of individual female alignment features are included on each frame. Adjacent photovoltaic modules are interlocked by multiple individual male alignment features on a first module of the adjacent photovoltaic modules fitting into and being surrounded by corresponding individual female alignment features on a second module of the adjacent photovoltaic modules. Other embodiments, features and aspects are also disclosed.

  15. ModuleModuleModuleModule NameNameNameName : Biostatistics Module NumberModule NumberModule NumberModule Number : 210235

    E-Print Network [OSTI]

    for the above types of confidence intervals and tests. Contribution to Program Learning Outcomes). Learning Outcomes:Learning Outcomes:Learning Outcomes:Learning Outcomes: On completing this module, student:Contribution to Program Learning Outcomes:Contribution to Program Learning Outcomes:Contribution to Program Learning

  16. Water heater control module

    DOE Patents [OSTI]

    Hammerstrom, Donald J

    2013-11-26T23:59:59.000Z

    An advanced electric water heater control system that interfaces with a high temperature cut-off thermostat and an upper regulating thermostat. The system includes a control module that is electrically connected to the high-temperature cut-off thermostat and the upper regulating thermostat. The control module includes a switch to open or close the high-temperature cut-off thermostat and the upper regulating thermostat. The control module further includes circuitry configured to control said switch in response to a signal selected from the group of an autonomous signal, a communicated signal, and combinations thereof.

  17. Sonication standard laboratory module

    DOE Patents [OSTI]

    Beugelsdijk, Tony (Los Alamos, NM); Hollen, Robert M. (Los Alamos, NM); Erkkila, Tracy H. (Los Alamos, NM); Bronisz, Lawrence E. (Los Alamos, NM); Roybal, Jeffrey E. (Santa Fe, NM); Clark, Michael Leon (Menan, ID)

    1999-01-01T23:59:59.000Z

    A standard laboratory module for automatically producing a solution of cominants from a soil sample. A sonication tip agitates a solution containing the soil sample in a beaker while a stepper motor rotates the sample. An aspirator tube, connected to a vacuum, draws the upper layer of solution from the beaker through a filter and into another beaker. This beaker can thereafter be removed for analysis of the solution. The standard laboratory module encloses an embedded controller providing process control, status feedback information and maintenance procedures for the equipment and operations within the standard laboratory module.

  18. Approved Module Information for PD1803, 2014/5 Module Title/Name: Engineering Principles Module Code: PD1803

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: PD1803 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module.i.smith@aston.ac.uk Telephone Number 3610 Office MB156C Additional Module Tutor(s): Michael David Peters. David Barry. LevelApproved Module Information for PD1803, 2014/5 Module Title/Name: Engineering Principles Module

  19. Approved Module Information for CH2107, 2014/5 Module Title/Name: Physical Chemistry II Module Code: CH2107

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : CH2107 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module. ----- [Part 2: Physical Chemistry Laboratory]; Building on material from a number of modules in the 1st and 2Approved Module Information for CH2107, 2014/5 Module Title/Name: Physical Chemistry II Module Code

  20. Approved Module Information for EM4003, 2014/5 Module Title/Name: Project Management Module Code: EM4003

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : EM4003 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module. Links to Research: The module will link to the work of the Project and Supply Chain Management ResearchApproved Module Information for EM4003, 2014/5 Module Title/Name: Project Management Module Code

  1. Approved Module Information for ME1601, 2014/5 Module Title/Name: Engineering Science Module Code: ME1601

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for ME1601, 2014/5 Module Title/Name: Engineering Science Module Code: ME1601 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module@aston.ac.uk Telephone Number Not Specified Office Not Specified Additional Module Tutor(s): David Smith. Abul Hossain

  2. Approved Module Information for PD2003, 2014/5 Module Title/Name: Engineering Principles 2 Module Code: PD2003

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for PD2003, 2014/5 Module Title/Name: Engineering Principles 2 Module Code: PD2003 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module.i.smith@aston.ac.uk Telephone Number 3610 Office MB156C Additional Module Tutor(s): Michael David Peters. David Barry. Level

  3. Approved Module Information for ME3011, 2014/5 Module Title/Name: Thermodynamics and Fluids Module Code: ME3011

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: ME3011 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Modules/ Exempt from Anonymous Marking Details Assessment Weight EXAM TOTAL Closed Book 2:00hrs - 80Approved Module Information for ME3011, 2014/5 Module Title/Name: Thermodynamics and Fluids Module

  4. Earth Minerals Did you read chapter 29

    E-Print Network [OSTI]

    Hart, Gus

    1 Chapter 29 Earth Minerals Did you read chapter 29 before coming to class? A. Yes B. No Lets play that begins in Hawaii Other "Hot Spots" around the world The interior structure of Earth has been determined outer core #12;2 What is different on earth (as opposed to other planets)? Continents Why does

  5. WELCOME TO THE ELECTRONIC RESERVES COURSE READINGS

    E-Print Network [OSTI]

    Shrader-Frechette, Kristin

    WELCOME TO THE ELECTRONIC RESERVES COURSE READINGS NOTE: THIS MATERIAL MAY BE PROTECTED-489 File # 020702008_Shrader #12;Science versus educated guessing - risk assessment, nuclear waste is irrational and ignorant in fearing risks such as permanent disposal of radioactive waste. In recent

  6. POLICY NAME 1ST READING BY

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    POLICY NAME 1ST READING BY FACULTY SENATE APPROVED BY FACULTY SENATE POSTED FOR PUBLIC COMMENT APPROVED BY PRES or PROVOST ADOPTED FINAL POLICY DESTINATION Student Pregnancy Leave Pending Regents Professor (Version 1) 01/26/2011 04/27/2011 Regents Professor (Version 2) 04/12/2012 Revised Policy

  7. Pulseshape characteristics of a 300 $\\mu$m PR03 R-measuring VELO sensor read out with a Beetle1.3 chip

    E-Print Network [OSTI]

    Palacios, A; Buytaert, J; Borel, J; Collins, P; Eckstein, D; Eklund, L; Ferro-Luzzi, M; Jans, E; Ketel, T; Petrie, D; Pivk, M; Tobin, M

    2005-01-01T23:59:59.000Z

    The signal-to-noise, overspill and undershoot characteristics of a VELO module equipped with Beetle1.3 read-out chips have been measured using 120 GeV pions from the SPS test beam facility at CERN. The module consists of a PR03 n-on-n 300 $\\mu$m R measuring prototype sensor and a fully populated K03 hybrid. Results are presented for a single Beetle1.3 chip with a variety of chip parameter settings controlling the pre-amplifier and shaper currents and feedback voltages, with the objective of establishing the performance of the module and understanding its dependence on the read-out chip settings.

  8. Absorbance modulation optical lithography

    E-Print Network [OSTI]

    Tsai, Hsin-Yu Sidney

    2007-01-01T23:59:59.000Z

    In this thesis, the concept of absorbance-modulation optical lithography (AMOL) is described, and the feasibility experimentally verified. AMOL is an implementation of nodal lithography, which is not bounded by the diffraction ...

  9. GREET Pretreatment Module

    SciTech Connect (OSTI)

    Adom, Felix K.; Dunn, Jennifer B.; Han, Jeongwoo

    2014-09-01T23:59:59.000Z

    A wide range of biofuels and biochemicals can be produced from biomass via different pretreatment technologies that yield sugars. This report documents the material and energy flows that occur when fermentable sugars from four lignocellulosic feedstocks (corn stover, miscanthus, switchgrass, and poplar) are produced via dilute acid pretreatment and ammonia fiber expansion. These flows are documented for inclusion in the pretreatment module of the Greenhouses Gases, Regulated Emissions, and Energy Use in Transportation (GREET) model. Process simulations of each pretreatment technology were developed in Aspen Plus. Material and energy consumption data from Aspen Plus were then compiled in the GREET pretreatment module. The module estimates the cradle-to-gate fossil energy consumption (FEC) and greenhouse gas (GHG) emissions associated with producing fermentable sugars. This report documents the data and methodology used to develop this module and the cradle-to-gate FEC and GHG emissions that result from producing fermentable sugars.

  10. Digital optical conversion module

    DOE Patents [OSTI]

    Kotter, D.K.; Rankin, R.A.

    1988-07-19T23:59:59.000Z

    A digital optical conversion module used to convert an analog signal to a computer compatible digital signal including a voltage-to-frequency converter, frequency offset response circuitry, and an electrical-to-optical converter. Also used in conjunction with the digital optical conversion module is an optical link and an interface at the computer for converting the optical signal back to an electrical signal. Suitable for use in hostile environments having high levels of electromagnetic interference, the conversion module retains high resolution of the analog signal while eliminating the potential for errors due to noise and interference. The module can be used to link analog output scientific equipment such as an electrometer used with a mass spectrometer to a computer. 2 figs.

  11. Photovoltaic module reliability workshop

    SciTech Connect (OSTI)

    Mrig, L. (ed.)

    1990-01-01T23:59:59.000Z

    The paper and presentations compiled in this volume form the Proceedings of the fourth in a series of Workshops sponsored by Solar Energy Research Institute (SERI/DOE) under the general theme of photovoltaic module reliability during the period 1986--1990. The reliability Photo Voltaic (PV) modules/systems is exceedingly important along with the initial cost and efficiency of modules if the PV technology has to make a major impact in the power generation market, and for it to compete with the conventional electricity producing technologies. The reliability of photovoltaic modules has progressed significantly in the last few years as evidenced by warranties available on commercial modules of as long as 12 years. However, there is still need for substantial research and testing required to improve module field reliability to levels of 30 years or more. Several small groups of researchers are involved in this research, development, and monitoring activity around the world. In the US, PV manufacturers, DOE laboratories, electric utilities and others are engaged in the photovoltaic reliability research and testing. This group of researchers and others interested in this field were brought together under SERI/DOE sponsorship to exchange the technical knowledge and field experience as related to current information in this important field. The papers presented here reflect this effort.

  12. The Evaluation and Use of Extensive Reading Materials 

    E-Print Network [OSTI]

    Tignanelli, Rosana

    2007-06-29T23:59:59.000Z

    The current investigation is based on the topic of “The evaluation and use of extensive reading materials”. Throughout this research, I attempted to find out whether a theory-based exploration on the evaluation and use of extensive reading...

  13. Release of DRAFT RFP Headquarters Reading Room Instructions/Guidelines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Release of DRAFT RFP Headquarters Reading Room InstructionsGuidelines 1. Reading Room Points of Contact: 721 - 88, Mike Baehre, (202) 586-6575 89 - Close of Draft RFP, John...

  14. Thermoelectrics Partnership: Automotive Thermoelectric Modules...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Novel Nanostructured Interface Solution for Automotive Thermoelectric Modules Application Thermoelectrics Partnership: Automotive...

  15. SU-E-T-97: Dependence Of Optically Stimulated Luminescent Dosimeter (OSLD) Out Of Field Response On Volumetric Modulated Arc Therapy (VMAT) Field Modulation

    SciTech Connect (OSTI)

    Ware, S; Clouser, E [Mayo Clinic Arizona, Phoenix, AZ (United States)

    2014-06-01T23:59:59.000Z

    Purpose: To determine the out of field response of Microstar ii OSLDs as a function of field modulation and distance in VMAT plan delivery. This work has potential application in fetal dose monitoring or measurements on cardiac pacemakers Methods: VMAT plans were created in Eclipse and optimized to varying degrees of modulation. Three plans were chosen to represent low, medium and high degrees of modulation (modulation factors as defined by MU/cGy). Plans were delivered to slabs of solid water with dimensions 60cm length, 30cm width, and 10cm height. For each modulation factor, 2 OSLDs were placed at 1cm depth with out of field distances of 1, 2, 3, 5, 8 and 10cm and the plan delivered isocentrically to a depth of 5cm. This technique was repeated for a Farmer Chamber by incrementing the table by the appropriate distance. The charge readings for the Farmer Chamber were converted to dose and the ratios taken as functions of modulation factors and distances out of field Results: Examination of the results as a function of out of field distance shows a trend of increasing OSLD/Farmer Chamber ratios for all modulation factors. The slopes appear to be roughly equivalent for all modulation factors investigated. Results as a function of modulation showed a downward trend for all out of field distances, with the greatest differences seen at 5cm and 8cm Conclusion: This study demonstrates that the response of OSLD dosimeters change as a function of out of field distance and modulation. The differences seen are within the stated accuracy of the system for the out of field distances and modulations investigated. Additional investigation is warranted to see if the OSLD response changes appreciably with longer out of field distances or wider ranges of modulation.

  16. Change of Dissertation Adviser or Reading Committee Member Stanford University

    E-Print Network [OSTI]

    Ford, James

    Change of Dissertation Adviser or Reading Committee Member Stanford University Please address approval for a change of dissertation adviser, the addition or deletion of a doctoral dissertation reading of the dissertation. Policy: The reading committee must conform to University regulations at the time of degree

  17. Secure Compressed Reading in Smart Grids

    E-Print Network [OSTI]

    Cai, Sheng; Chen, Minghua; Yan, Jianxin; Jaggi, Sidharth

    2012-01-01T23:59:59.000Z

    Smart Grids measure energy usage in real-time and tailor supply and delivery accordingly, in order to improve power transmission and distribution. For the grids to operate effectively, it is critical to collect readings from massively-installed smart meters to control centers in an efficient and secure manner. In this paper, we propose a secure compressed reading scheme to address this critical issue. We observe that our collected real-world meter data express strong temporal correlations, indicating they are sparse in certain domains. We adopt Compressed Sensing technique to exploit this sparsity and design an efficient meter data transmission scheme. Our scheme achieves substantial efficiency offered by compressed sensing, without the need to know beforehand in which domain the meter data are sparse. This is in contrast to traditional compressed-sensing based scheme where such sparse-domain information is required a priori. We then design specific dependable scheme to work with our compressed sensing based ...

  18. Method and apparatus for reading thermoluminescent phosphors

    DOE Patents [OSTI]

    Braunlich, Peter F. (SW. 730 City View, Pullman, WA 99163); Tetzlaff, Wolfgang (Pullman, WA)

    1987-01-01T23:59:59.000Z

    An apparatus and method for rapidly reading thermoluminescent phosphors to determine the amount of luminescent energy stored therein. The stored luminescent energy is interpreted as a measure of the total exposure of the thermoluminescent phosphor to ionizing radiation. The thermoluminescent phosphor reading apparatus uses a laser to generate a laser beam. The laser beam power level is monitored by a laser power detector and controlled to maintain the power level nearly constant. A shutter or other laser beam interrupting means is used to control exposure of the thermoluminescent phosphor to the laser beam. The laser beam can be equalized using an optical equalizer so that the laser beam has an approximately uniform power density across the beam. The heated thermoluminescent phosphor emits a visible or otherwise detectable luminescent emission which is measured as an indication of the radiation exposure of the thermoluminescent phosphors. Also disclosed are preferred signal processing and control circuits.

  19. Literaturlenz: Reading with Authors from Germany, Switzerland, and Austria Reading with Larissa Boehning, Monica Cantieni, and Linda Stift

    E-Print Network [OSTI]

    Sheridan, Jennifer

    Literaturlenz: Reading with Authors from Germany, Switzerland, and Austria Reading with Larissa.m. Each year Literaturlenz brings authors from Germany, Switzerland, and Austria to the UW Campus. Each Boehning from Germany, Monica Cantieni from Switzerland, and Linda Stift of Austria. The readings

  20. Young and Older Adults’ Reading of Distracters

    E-Print Network [OSTI]

    Kemper, Susan; McDowd, Joan; Metcalf, Kim; Liu, Chiung-Ju

    2008-05-01T23:59:59.000Z

    . Psychology and Aging , 22, 84-94. Kemper, S., & McDowd, J. (2006). Eye movements of young and older adults while reading with distraction. Psychology and Aging, 21, 32-39. Kucera, H., & Francis, W.N. (1967). Computational Analysis of Present-Day American... English. Providence: Brown University Press. Lavie, N., (1995). Perceptual load as a necessary condition for selective attention. Journal of Experimental Psychology: Human Perception and Performance, 21, 451-468. Maylor, E. A., & Lavie, N. (1998...

  1. Reading the EIS on compact disc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Radiation ProtectionRaising funds forAdvancedAdvancedReading

  2. Approved Module Information for CE1002, 2014/5 Module Title/Name: Design and Build Module Code: CE1002

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    1002 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Credits@aston.ac.uk Telephone Number 3426 Office MBL25A Additional Module Tutor(s): George Drahun. John Brammer. Yassir Makkawi? Not Specified Module Learning Information Module Aims: To introduce students to: the design process, working

  3. Approved Module Information for EE4024, 2014/5 Module Title/Name: Distributed Network Applications Module Code: EE4024

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Module Code: EE4024 School: Engineering and Applied Science Module Type: Standard Module New Module.a.eberhard@aston.ac.uk Telephone Number Not Specified Office Not Specified Additional Module Tutor(s): John Williams. Level to develop and use structured approaches to problem solving. Indicative Module Content: The module introduces

  4. Approved Module Information for CH3010, 2014/5 Module Title/Name: Catalysis Module Code: CH3010

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for CH3010, 2014/5 Module Title/Name: Catalysis Module Code: CH3010 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Credits: 10 in which available: BSc/MChem Applied Chemistry. BSc/MChem Chemistry. BEng/MEng Chemical Engineering. MEng

  5. Photovoltaic module and interlocked stack of photovoltaic modules

    SciTech Connect (OSTI)

    Wares, Brian S.

    2012-09-04T23:59:59.000Z

    One embodiment relates to an arrangement of photovoltaic modules configured for transportation. The arrangement includes a plurality of photovoltaic modules, each photovoltaic module including a frame having at least a top member and a bottom member. A plurality of alignment features are included on the top member of each frame, and a plurality of alignment features are included on the bottom member of each frame. Adjacent photovoltaic modules are interlocked by the alignment features on the top member of a lower module fitting together with the alignment features on the bottom member of an upper module. Other embodiments, features and aspects are also disclosed.

  6. Phase modulated multiphoton microscopy

    E-Print Network [OSTI]

    Karki, Khadga Jung; Pullerits, Tonu

    2015-01-01T23:59:59.000Z

    We show that the modulation of the phases of the laser beams of ultra-short pulses leads to modulation of the two photon fluorescence intensity. The phase modulation technique when used in multi-photon microscopy can improve the signal to noise ratio. The technique can also be used in multiplexing the signals in the frequency domain in multi-focal raster scanning microscopy. As the technique avoids the use of array detectors as well as elaborate spatiotemporal multiplexing schemes it provides a convenient means to multi-focal scanning in axial direction. We show examples of such uses. Similar methodology can be used in other non-linear scanning microscopies, such as second or third harmonic generation microscopy.

  7. Power module assembly

    DOE Patents [OSTI]

    Campbell, Jeremy B. (Torrance, CA); Newson, Steve (Redondo Beach, CA)

    2011-11-15T23:59:59.000Z

    A power module assembly of the type suitable for deployment in a vehicular power inverter, wherein the power inverter has a grounded chassis, is provided. The power module assembly comprises a conductive base layer electrically coupled to the chassis, an insulating layer disposed on the conductive base layer, a first conductive node disposed on the insulating layer, a second conductive node disposed on the insulating layer, wherein the first and second conductive nodes are electrically isolated from each other. The power module assembly also comprises a first capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the first conductive node, and further comprises a second capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the second conductive node.

  8. Flexible programmable logic module

    DOE Patents [OSTI]

    Robertson, Perry J. (Albuquerque, NM); Hutchinson, Robert L. (Albuquerque, NM); Pierson, Lyndon G. (Albuquerque, NM)

    2001-01-01T23:59:59.000Z

    The circuit module of this invention is a VME board containing a plurality of programmable logic devices (PLDs), a controlled impedance clock tree, and interconnecting buses. The PLDs are arranged to permit systolic processing of a problem by offering wide data buses and a plurality of processing nodes. The board contains a clock reference and clock distribution tree that can drive each of the PLDs with two critically timed clock references. External clock references can be used to drive additional circuit modules all operating from the same synchronous clock reference.

  9. Method of monolithic module assembly

    DOE Patents [OSTI]

    Gee, James M. (Albuquerque, NM); Garrett, Stephen E. (Albuquerque, NM); Morgan, William P. (Albuquerque, NM); Worobey, Walter (Albuquerque, NM)

    1999-01-01T23:59:59.000Z

    Methods for "monolithic module assembly" which translate many of the advantages of monolithic module construction of thin-film PV modules to wafered c-Si PV modules. Methods employ using back-contact solar cells positioned atop electrically conductive circuit elements affixed to a planar support so that a circuit capable of generating electric power is created. The modules are encapsulated using encapsulant materials such as EVA which are commonly used in photovoltaic module manufacture. The methods of the invention allow multiple cells to be electrically connected in a single encapsulation step rather than by sequential soldering which characterizes the currently used commercial practices.

  10. Server Control Module Fulfillsserversignalingfunctionality

    E-Print Network [OSTI]

    Shenoy, Prashant

    CCM CCM CCM SCM SCM GM SGM SGM SGM SGM SGM SGM SGM SGMSGM SGM SGM SGMSGM Input Streams Output Streams Client Requests SCM SCM CCM Stream Requests Server Control Module streamservices GMaltersData Planetoperform requested service GMsends requestfor stream toCCM AMPS Design, Build

  11. Terminal coalgebras via modules

    E-Print Network [OSTI]

    Cheng, Eugenia

    Terminal coalgebras via modules Tom Leinster (Glasgow/EPSRC) Apostolos Matzaris (Patras a terminal coalgebra #12;Plan We'll give a new proof of an old theorem (Bird, Makkai­Par´e, Barr, Ad´amek): every finitary endofunctor of a locally finitely presentable category has a terminal coalgebra #12

  12. Module Handbook Specialisation Biomass Energy

    E-Print Network [OSTI]

    Damm, Werner

    Module Handbook Specialisation Biomass Energy 2nd Semester for the Master Programme REMA/EUREC Course 2008/2009 University of Zaragoza Specialisation Provider: Biomass Energy #12;Specialisation Biomass Energy, University of Zaragoza Modul: Introduction and Basic Concepts

  13. Hierarchical classification of modulation signals

    E-Print Network [OSTI]

    Kim, Nam Jin

    2002-01-01T23:59:59.000Z

    This thesis addresses the problem of classifying both analog and digital modulation signals using different kinds of classifiers. The classification of modulation signals has both civilian and military applications. A total of 31 statistical signal...

  14. Read: Nepali Publishing How is it Faring?

    E-Print Network [OSTI]

    Fineprint Bookclub

    2007-01-01T23:59:59.000Z

    of Peace. A proposal for declaring Nepal as Free Port is made to generate massive infl ow of tourists from both India and China. Nothing empowers a person as much as a weapon. With the cue derived from the Maoists’ success in mobilizing the masses... a member: · You will get a copy of Read magazine for free · You can browse books on our website and buy them on 10 to 30 percent discounts and have them home de- livered to you for free?and save time and travel expenses · You can intellectually...

  15. DOE-ID FOIA Reading Room

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisitingContract Management Fermi SitePARTOffice ofHale Plan by(formerlyand5,Reading

  16. Public Reading Facilities | National Nuclear Security Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeedingTechnical News,Program90803| DepartmentPseudogaps,Point ThisReading

  17. Reading the Cosmic Writing on the Wall

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeedingTechnicalPurchase,Reaction-Driven Restructuring ofOSCARS CaseReading

  18. Reading Enterprise Hub | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries Pvt Ltd Jump to: navigation, searchRay County, Missouri:ReSun Energy Pvt LtdReading

  19. TruRead | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown of Ladoga, Indiana (UtilityTri-State ElectricSolarTruRead Jump to: navigation,

  20. Policy Implications: Replacing the Reading TAKS Cut Scores with the Common Core Curriculum Reading Cut Scores on Three Middle School Campuses

    E-Print Network [OSTI]

    Thaemlitz, Kristi

    2013-07-30T23:59:59.000Z

    reading rigor to ensure academic success is key for educators. Although Texas opted not to adopt the Common Core Curriculum Standards and the accompanying Stretch Lexile measures for reading that require higher reading levels at each grade, Texas educators...

  1. Topic 2: Backtracking andTopic 2: Backtracking and Recommended ReadingsRecommended Readings

    E-Print Network [OSTI]

    Stephenson, Ben

    Recommended Readings ·· Chapter 3 from Programming in PrologChapter 3 from Programming in Prolog 2 Searching for the AnswerSearching for the Answer ·· Two notions of correctnessTwo notions of correctness ­­ Logical conjunction shouldn't matter ·· In practice, Prolog searches for an answerIn practice, Prolog searches

  2. Approved Module Information for CE3102, 2014/5 Module Title/Name: Reaction Engineering Module Code: CE3102

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : CE3102 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module@aston.ac.uk Telephone Number 5211 Office MB122 Additional Module Tutor(s): Feroz Kabir. Level Description: Level 6 Module Aims: Familiarity with a structured approach to the design of chemical reactors using mass

  3. Approved Module Information for BH3328, 2014/5 Module Title/Name: Psychology and Work Module Code: BH3328

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for BH3328, 2014/5 Module Title/Name: Psychology and Work Module Code Module Management Information Module Leader Name Alison Legood Email Address a.legood2@aston.ac.uk Telephone Number 0121 204 3270 Office SW8018 Additional Module Tutor(s): Dhensa-Kahlon. Level Description

  4. Approved Module Information for BH2239, 2014/5 Module Title/Name: Psychology and Work Module Code: BH2239

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for BH2239, 2014/5 Module Title/Name: Psychology and Work Module Code Module Management Information Module Leader Name Alison Legood Email Address a.legood2@aston.ac.uk Telephone Number 0121 204 3270 Office SW8018 Additional Module Tutor(s): Dhensa-Kahlon. Level Description

  5. Approved Module Information for ME2045, 2014/5 Module Title/Name: Solid Mechanics Module Code: ME2045

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    2045 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Credits? Not Specified Module Dependancies Pre-requisites: Engineering Science (ME1601). Co-requisites: None Specified scenarios. Module Learning Outcomes: An ability to identify and simplify real life structural design

  6. Approved Module Information for CS1410, 2014/5 Module Title/Name: Java Program Development Module Code: CS1410

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: CS1410 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module.t.nabney@aston.ac.uk Telephone Number Not Specified Office Not Specified Additional Module Tutor(s): Nelly Bencomo. Level Electronic Engineering and Computer Science. Available to Exchange Students? Not Specified Module

  7. Alternative Energy Sources -- An Interdisciplinary Module for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Alternative Energy Sources -- An Interdisciplinary Module for Energy Education Alternative Energy Sources -- An Interdisciplinary Module for Energy Education Find activities...

  8. Module isolation devices

    SciTech Connect (OSTI)

    Carolan, Michael Francis; Cooke, John Albert; Buzinski, Michael David

    2010-04-27T23:59:59.000Z

    A gas flow isolation device includes a gas flow isolation valve movable from an opened condition to a closed condition. The module isolation valve in one embodiment includes a rupture disk in flow communication with a flow of gas when the module isolation valve is in an opened condition. The rupture disk ruptures when a predetermined pressure differential occurs across it causing the isolation valve to close. In one embodiment the valve is mechanically linked to the rupture disk to maintain the valve in an opened condition when the rupture disk is intact, and which permits the valve to move into a closed condition when the rupture disk ruptures. In another embodiment a crushable member maintains the valve in an open condition, and the flow of gas passed the valve upon rupturing of the rupture disk compresses the crushable member to close the isolation valve.

  9. MODULE CODE INT3612 MODULE LEVEL 3 MODULE TITLE Law Based Dissertation

    E-Print Network [OSTI]

    Mumby, Peter J.

    1 MODULE CODE INT3612 MODULE LEVEL 3 MODULE TITLE Law Based Dissertation LECTURER(S) Ugochukwu; 1.5 hours English one-to-one tutorials (3x30 minutes over 5 weeks); 2.5 hours dissertation tutorials: Produce a formal dissertation demonstrating the results of an independent project Show competence

  10. accurate short read: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Binocular Disparity in Dyslexic CiteSeer Summary: Children with developmental dyslexia show reading impairment compared to their peers, despite being matched on IQ,...

  11. als7 open reading: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Binocular Disparity in Dyslexic CiteSeer Summary: Children with developmental dyslexia show reading impairment compared to their peers, despite being matched on IQ,...

  12. Reading Municipal Light Department- Business Lighting Rebate Program

    Broader source: Energy.gov [DOE]

    Reading Municipal Light Department (RMLD) offers incentives for non-residential customers to install energy efficient lights and sensors in existing facilities. In addition to rebates for the...

  13. Tandem resonator reflectance modulator

    DOE Patents [OSTI]

    Fritz, I.J.; Wendt, J.R.

    1994-09-06T23:59:59.000Z

    A wide band optical modulator is grown on a substrate as tandem Fabry-Perot resonators including three mirrors spaced by two cavities. The absorption of one cavity is changed relative to the absorption of the other cavity by an applied electric field, to cause a change in total reflected light, as light reflecting from the outer mirrors is in phase and light reflecting from the inner mirror is out of phase with light from the outer mirrors. 8 figs.

  14. Model documentation, Coal Market Module of the National Energy Modeling System

    SciTech Connect (OSTI)

    NONE

    1998-01-01T23:59:59.000Z

    This report documents the objectives and the conceptual and methodological approach used in the development of the National Energy Modeling System`s (NEMS) Coal Market Module (CMM) used to develop the Annual Energy Outlook 1998 (AEO98). This report catalogues and describes the assumptions, methodology, estimation techniques, and source code of CMM`s two submodules. These are the Coal Production Submodule (CPS) and the Coal Distribution Submodule (CDS). CMM provides annual forecasts of prices, production, and consumption of coal for NEMS. In general, the CDS integrates the supply inputs from the CPS to satisfy demands for coal from exogenous demand models. The international area of the CDS forecasts annual world coal trade flows from major supply to major demand regions and provides annual forecasts of US coal exports for input to NEMS. Specifically, the CDS receives minemouth prices produced by the CPS, demand and other exogenous inputs from other NEMS components, and provides delivered coal prices and quantities to the NEMS economic sectors and regions.

  15. Processing module operating methods, processing modules, and communications systems

    DOE Patents [OSTI]

    McCown, Steven Harvey; Derr, Kurt W.; Moore, Troy

    2014-09-09T23:59:59.000Z

    A processing module operating method includes using a processing module physically connected to a wireless communications device, requesting that the wireless communications device retrieve encrypted code from a web site and receiving the encrypted code from the wireless communications device. The wireless communications device is unable to decrypt the encrypted code. The method further includes using the processing module, decrypting the encrypted code, executing the decrypted code, and preventing the wireless communications device from accessing the decrypted code. Another processing module operating method includes using a processing module physically connected to a host device, executing an application within the processing module, allowing the application to exchange user interaction data communicated using a user interface of the host device with the host device, and allowing the application to use the host device as a communications device for exchanging information with a remote device distinct from the host device.

  16. Phase modulation in RF tag

    DOE Patents [OSTI]

    Carrender, Curtis Lee; Gilbert, Ronald W.

    2007-02-20T23:59:59.000Z

    A radio frequency (RF) communication system employs phase-modulated backscatter signals for RF communication from an RF tag to an interrogator. The interrogator transmits a continuous wave interrogation signal to the RF tag, which based on an information code stored in a memory, phase-modulates the interrogation signal to produce a backscatter response signal that is transmitted back to the interrogator. A phase modulator structure in the RF tag may include a switch coupled between an antenna and a quarter-wavelength stub; and a driver coupled between the memory and a control terminal of the switch. The driver is structured to produce a modulating signal corresponding to the information code, the modulating signal alternately opening and closing the switch to respectively decrease and increase the transmission path taken by the interrogation signal and thereby modulate the phase of the response signal. Alternatively, the phase modulator may include a diode coupled between the antenna and driver. The modulating signal from the driver modulates the capacitance of the diode, which modulates the phase of the response signal reflected by the diode and antenna.

  17. Approved Module Information for EE2SSM, 2014/5 Module Title/Name: Sequential State Machines Module Code: EE2SSM

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: EE2SSM School: Engineering and Applied Science Module Type: Standard Module New Module? No ModuleApproved Module Information for EE2SSM, 2014/5 Module Title/Name: Sequential State Machines Module Credits: 10 Module Management Information Module Leader Name John Williams Email Address willijar

  18. Approved Module Information for CE1007, 2014/5 Module Title/Name: Health, Safety & the Environment Module Code: CE1007

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Module Code: CE1007 School: Engineering and Applied Science Module Type: Standard Module New ModuleApproved Module Information for CE1007, 2014/5 Module Title/Name: Health, Safety & the Environment? No Module Credits: 10 Module Management Information Module Leader Name George Drahun Email Address j

  19. Dalhousie Libraries e-Reserves Service Library Readings in OWL

    E-Print Network [OSTI]

    Dellaire, Graham

    will look like this: #12;Dalhousie Libraries can Provide URLs to these Types of Electronic MaterialDalhousie Libraries e-Reserves Service Library Readings in OWL #12;Course Reserves Faculty now have 2 options for Reserve materials: NEW Option: Upload a course reading list and Library staff will

  20. Reading Tea Leaves: How Humans Interpret Topic Models

    E-Print Network [OSTI]

    Boyd-Graber, Jordan

    Gerrish Chong Wang David M. Blei NIPS 2009 Dec 9th, 2009 Princeton University Identity Guidelines, Blei Reading Tea Leaves #12;Topic Models in a Nutshell From an input corpus words to topics Forget, Blei Reading Tea Leaves #12;Topic Models in a Nutshell From an input corpus words to topics computer

  1. Minnesota Center for Reading ResearchResearchtoPolicyBrief

    E-Print Network [OSTI]

    Ciocan-Fontanine, Ionut

    Minnesota Center for Reading ResearchResearchtoPolicyBrief Making Sense of Dyslexia What is Dyslexia? The American Psychiatric Association (2000) defined dyslexia as reading achievement that impairments. The term "dyslexia" is a medical term. Schools do not use the term "dyslexia." Instead, special

  2. Read-out electronics for DC squid magnetic measurements

    DOE Patents [OSTI]

    Ganther, Jr., Kenneth R. (Olathe, KS); Snapp, Lowell D. (Independence, MO)

    2002-01-01T23:59:59.000Z

    Read-out electronics for DC SQUID sensor systems, the read-out electronics incorporating low Johnson noise radio-frequency flux-locked loop circuitry and digital signal processing algorithms in order to improve upon the prior art by a factor of at least ten, thereby alleviating problems caused by magnetic interference when operating DC SQUID sensor systems in magnetically unshielded environments.

  3. NERSC Modules Software Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |IsLove Your1AllocationsNOVA Portal:Ott2006.jpgEnvironment » Modules

  4. Optical read out and feedback cooling of a nanostring optomechanical cavity

    E-Print Network [OSTI]

    Krause, Alex G; Painter, Oskar

    2015-01-01T23:59:59.000Z

    Optical measurement of the motion of a 940 kHz mechanical resonance of a silicon nitride nanostring resonator is demonstrated with a read out noise imprecision reaching 37 dB below that of the resonator's zero-point fluctuations. Via intensity modulation of the optical probe laser, radiation pressure feedback is used to cool and damp the mechanical mode from an initial room temperature occupancy of $\\bar{n}_{b} = 6.5 \\times 10^6$ ($T_{b}=295$K) down to a phonon occupation of $\\langle n \\rangle = 66 \\pm 10$, representing a mode temperature of $T_{m} \\approx 3$mK. The five decades of cooling is enabled by the system's large single-photon cooperativity $(C_{1} = 4)$ and high quantum efficiency of optical motion detection ($\\eta_{t} = 0.27$).

  5. Thermoelectrics Partnership: Automotive Thermoelectric Modules...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ace067goodson2011o.pdf More Documents & Publications Thermoelectrics Partnership: Automotive Thermoelectric Modules with Scalable Thermo- and Electro-Mechanical Interfaces Novel...

  6. Approved Module Information for BN3322, 2014/5 Module Title/Name: International Operations Module Code: BN3322

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    of this module is structured in a manner to make its practical applicability clear to students. Tutorials@aston.ac.uk Telephone Number Not Specified Office Not Specified Additional Module Tutor(s): Christopher Owen. LevelApproved Module Information for BN3322, 2014/5 Module Title/Name: International Operations Module

  7. Approved Module Information for CS2230, 2014/5 Module Title/Name: Operating Systems Module Code: CS2230

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    to ensure students do engage with tutorials. The aim is to help keep the student's work on the module more2230 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Credits appropriate software tools and algorithms to deal with them. Main structural components of an OS

  8. Approved Module Information for CS4830, 2014/5 Module Title/Name: Requirements Engineering Module Code: CS4830

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: CS4830 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module * The structure and application of a requirement engineering process. Relevant tools, techniques and standards coursework and tutorial and guided self study. Module Assessment Methods of Assessment & associated weighting

  9. Approved Module Information for CS2010, 2014/5 Module Title/Name: Group Project Module Code: CS2010

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    School: Engineering and Applied Science Module Type: Project New Module? No Module Credits: 20 Module: BSc Computing Science. Available to Exchange Students? Not Specified Module Dependancies Pre science theory. * Use appropriate tools for the support of effective team-based software engineering

  10. Approved Module Information for BS1163, 2014/5 Module Title/Name: Introduction to Microeconomics Module Code: BS1163

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    , the potential trade-off between an efficient and equitable distribution of resources will be discussed Module Code: BS1163 School: Aston Business School Module Type: Standard Module New Module? No Module to introduce students to threshold concepts in economics and core models used in microeconomic theory

  11. Adding a Learning Module -1 Adding a Learning Module

    E-Print Network [OSTI]

    Cui, Yan

    Items focused on a specific subject that students can navigate at their own pace. For example or No for Enforce Sequential Viewing for the Learning Module. Selecting Yes will require students to view the Learning Module within a Table of Contents, which students can also use to navigate through the Learning

  12. Module title Business Based Dissertation Module code INT3601

    E-Print Network [OSTI]

    Mumby, Peter J.

    Module title Business Based Dissertation Module code INT3601 Academic year(s) 2013/4 Credits 30 for assignment and dissertation writing. The dissertation itself brings together all the skills and knowledge material for study 2. demonstrate skills in data collection and research for writing a dissertation #12

  13. Taught Masters Module Guide LEC Taught Masters Module Guide

    E-Print Network [OSTI]

    Sengun, Mehmet Haluk

    ;MODULE NUMBER: BIOL 405 MODULE TITLE: BIOLOGICAL EFFECTS OF AIR POLLUTION AND CLIMATE CHANGE Number warming, ozone depletion, elevated CO2, tropospheric air pollution) and an in-depth analysis health: impacts, adaptation and mitigation Week 2 Air pollutants: plants as our garbage chutes

  14. Department of Mechanical Engineering MODULE DESCRIPTION FORM

    E-Print Network [OSTI]

    Mottram, Nigel

    the students will encounter may include (in addition to those mentioned above): refrigeration and power systems th and 5 th year classes. Recommended Reading ****Purchase essential; ***Purchase recommended; **Highly recommended reading; *Simply for reference (do NOT purchase) Class reading to be recommended

  15. Effects of Orthographic Depth on Literacy Performance: Reading Comprehension Difficulties Across Languages

    E-Print Network [OSTI]

    McClung, Nicola Ann

    2012-01-01T23:59:59.000Z

    Specific reading disability (dyslexia): What have we learnedThe nature and causes of dyslexia in different languages. Inreading deficit in developmental dyslexia: A review. Reading

  16. Rnnotator: an automated de novo transcriptome assembly pipeline from stranded RNA-Seq reads

    E-Print Network [OSTI]

    Martin, Jeffrey

    2011-01-01T23:59:59.000Z

    transcriptome assembly pipeline from stranded RNA-Seq readsRnnotator assembly pipeline. Figure 2. Read dereplicationan automated software pipeline that generates transcript

  17. Light modulating device

    DOE Patents [OSTI]

    Rauh, R.D.; Goldner, R.B.

    1989-12-26T23:59:59.000Z

    In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity are disclosed. 1 fig.

  18. Photovoltaic module mounting system

    DOE Patents [OSTI]

    Miros, Robert H. J. (Fairfax, CA); Mittan, Margaret Birmingham (Oakland, CA); Seery, Martin N. (San Rafael, CA); Holland, Rodney H. (Novato, CA)

    2012-04-17T23:59:59.000Z

    A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

  19. Photovoltaic module mounting system

    DOE Patents [OSTI]

    Miros, Robert H. J.; Mittan, Margaret Birmingham; Seery, Martin N; Holland, Rodney H

    2012-09-18T23:59:59.000Z

    A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

  20. Light modulating device

    DOE Patents [OSTI]

    Rauh, R. David (Newton, MA); Goldner, Ronald B. (Lexington, MA)

    1989-01-01T23:59:59.000Z

    In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity.

  1. Argonne's SpEC Module

    ScienceCinema (OSTI)

    Harper, Jason

    2014-06-05T23:59:59.000Z

    Jason Harper, an electrical engineer in Argonne National Laboratory's EV-Smart Grid Interoperability Center, discusses his SpEC Module invention that will enable fast charging of electric vehicles in under 15 minutes. The module has been licensed to BTCPower.

  2. Argonne's SpEC Module

    SciTech Connect (OSTI)

    Harper, Jason

    2014-05-05T23:59:59.000Z

    Jason Harper, an electrical engineer in Argonne National Laboratory's EV-Smart Grid Interoperability Center, discusses his SpEC Module invention that will enable fast charging of electric vehicles in under 15 minutes. The module has been licensed to BTCPower.

  3. Module Handbook Specialisation Wind Energy

    E-Print Network [OSTI]

    Habel, Annegret

    ;Specialisation Wind Energy, NTU Athens, 2nd Semester Module 1/Wind Energy: Wind potential, Aerodynamics & Loading of Wind Turbines Module name: Wind potential, Aerodynamics & Loading of Wind Turbines Section Classes Evaluation of Wind Energy Potential Wind turbine Aerodynamics Static and dynamic Loading of Wind turbines

  4. Approved Module Information for AM20PD, 2014/5 Module Title/Name: Probability Distributions Module Code: AM20PD

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: AM20PD School: Engineering and Applied Science Module Type: Standard Module New Module? No Module? Not Specified Module Dependancies Pre-requisites: Transition Mathematics (AM10TM). Statistics and ProbabilityApproved Module Information for AM20PD, 2014/5 Module Title/Name: Probability Distributions Module

  5. Approved Module Information for EE3RSY, 2014/5 Module Title/Name: Radio Systems and Personal

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Communications Systems Module Code: EE3RSY School: Engineering and Applied Science Module Type: Standard ModuleApproved Module Information for EE3RSY, 2014/5 Module Title/Name: Radio Systems and Personal New Module? No Module Credits: 10 Module Management Information Module Leader Name Xiaohong Peng Email

  6. A fourth order [Sigma] [Delta] bandpass modulator

    E-Print Network [OSTI]

    Hsu, Stephanie C

    2009-01-01T23:59:59.000Z

    A fourth order bandpass [Sigma] [Delta] modulator is proposed to digitize signals from a MEMS gyroscope. The modulator samples the amplitude-modulated signal at eight times the carrier frequency and achieves an SNR of 82dB ...

  7. Andrew Mahlstadt Literature and the Mountains recommended reading

    E-Print Network [OSTI]

    Wisconsin at Madison, University of

    Andrew Mahlstadt Literature and the Mountains ­ recommended reading Critical works on mountains", in The Adventures of Ghanada (Premendra Mitra) A River Runs through it (Norman Maclean) "Brokeback Mountain" (Annie

  8. Learning Hierarchical Plans by Reading Simple English Dustin Smith

    E-Print Network [OSTI]

    Herr, Hugh

    Learning Hierarchical Plans by Reading Simple English Narratives Dustin Smith MIT Media Lab Cambridge, MA USA dsmit@mit.edu Kenneth Arnold MIT Media Lab Cambridge, MA USA kcarnold@mit.edu ABSTRACT We

  9. March 2006 87 recently read Thomas L. Fried-

    E-Print Network [OSTI]

    Paul, JoAnn M.

    March 2006 87 I recently read Thomas L. Fried- man's book, The World Is Flat: A Brief History- ded systems as computers interacting with noncomputer, physical systems such as automobiles and power

  10. Reading Municipal Light Department- Business Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    Reading Municipal Light Department (RMLD) offers energy efficiency incentives to eligible commercial and industrial customers. Rebates of up to $50,000 are available to customers who wish to reduce...

  11. HEART SMART NUTRITION Heart Smart Shopping & Label Reading

    E-Print Network [OSTI]

    Lesson 3 HEART SMART NUTRITION Heart Smart Shopping & Label Reading What's the first step in fat. Your goal is to eat a diet lower in saturated fat, trans fat, and cholesterol. The National Heart

  12. Reading Municipal Light Department- Residential ENERGY STAR Appliance Rebate Program

    Broader source: Energy.gov [DOE]

    Reading Municipal Light Department (RMLD) offers rebates to residential customers who install Energy Star appliances in eligible homes. The offer is limited to one rebate per appliance or a maximum...

  13. Klara Hitler's Son: Reading the Langer Report on Hitler's Mind

    E-Print Network [OSTI]

    Spark, Clare L.

    1999-04-01T23:59:59.000Z

    ) who frowned upon Melville/ Ahab the Hebraic moralist were simultaneously involved in the creation of propaganda during the Roosevelt administration. Neither antisemitism in the Melville Revival nor Murray's Jungian reading of Hitler's soma and psyche...

  14. Force Modulator System

    SciTech Connect (OSTI)

    Redmond Clark

    2009-04-30T23:59:59.000Z

    Many metal parts manufacturers use large metal presses to shape sheet metal into finished products like car body parts, jet wing and fuselage surfaces, etc. These metal presses take sheet metal and - with enormous force - reshape the metal into a fully formed part in a manner of seconds. Although highly efficient, the forces involved in forming metal parts also damage the press itself, limit the metals used in part production, slow press operations and, when not properly controlled, cause the manufacture of large volumes of defective metal parts. To date, the metal-forming industry has not been able to develop a metal-holding technology that allows full control of press forces during the part forming process. This is of particular importance in the automotive lightweighting efforts under way in the US automotive manufacturing marketplace. Metalforming Controls Technology Inc. (MC2) has developed a patented press control system called the Force Modulator that has the ability to control these press forces, allowing a breakthrough in stamping process control. The technology includes a series of hydraulic cylinders that provide controlled tonnage at all points in the forming process. At the same time, the unique cylinder design allows for the generation of very high levels of clamping forces (very high tonnages) in very small spaces; a requirement for forming medium and large panels out of HSS and AHSS. Successful production application of these systems testing at multiple stamping operations - including Ford and Chrysler - has validated the capabilities and economic benefits of the system. Although this technology has been adopted in a number of stamping operations, one of the primary barriers to faster adoption and application of this technology in HSS projects is system cost. The cost issue has surfaced because the systems currently in use are built for each individual die as a custom application, thus driving higher tooling costs. This project proposed to better marry the die-specific Force Modulator technology with stamping presses in the form of a press cushion. This system would be designed to operate the binder ring for multiple parts, thus cutting the per-die cost of the technology. This study reports the results of technology field application. This project produced the following conclusions: (1) The Force Modulator system is capable of operating at very high tempos in the stamping environment; (2) The company can generate substantial, controlled holding tonnage (binder ring pressure) necessary to hold high strength steel parts for proper formation during draw operations; (3) A single system can be designed to operate with a family of parts, thus significantly reducing the per-die cost of a FM system; (4) High strength steel parts made with these systems appear to show significant quality improvements; (5) The amounts of steel required to make these parts is typically less than the amounts required with traditional blank-holding technologies; and (6) This technology will aid in the use of higher strength steels in auto and truck production, thus reducing weight and improving fuel efficiency.

  15. Characterizing the thermal efficiency of thermoelectric modules

    E-Print Network [OSTI]

    Phillips, Samuel S

    2009-01-01T23:59:59.000Z

    An experimental setup was designed and utilized to measure the thermoelectric properties as functions of temperature of a commercially available, bismuth telluride thermoelectric module. Thermoelectric modules are solid ...

  16. Module 2: Hydrogen Use | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the inherent advantages and disadvantages of each method fcm02r0.pdf More Documents & Publications Hydrogen Properties Module 5: Fuel Cell Systems Module 4: Fuel Cell Technology...

  17. Lateral electrodeposition of compositionally modulated metal layers

    DOE Patents [OSTI]

    Hearne, Sean J

    2014-03-25T23:59:59.000Z

    A method for making a laterally modulated metallic structure that is compositionally modulated in the lateral direction with respect to a substrate.

  18. Alternative Energy Sources - An Interdisciplinary Module for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Sources - An Interdisciplinary Module for Energy Education Alternative Energy Sources - An Interdisciplinary Module for Energy Education Below is information about the...

  19. Reading List: Foundations Module Required readings will either be taken from the following textbooks or be made available through e-reserves in the library.

    E-Print Network [OSTI]

    Chisholm, Rex L.

    , Szilagyi P., 10th Edition. Wolters Kluwer Health/Lippincott Williams & Wilkins, 2009. no MDM Clinical

  20. Quantum modulation against electromagnetic interference

    E-Print Network [OSTI]

    Juan Carlos Garcia-Escartin

    2014-11-26T23:59:59.000Z

    Periodic signals in electrical and electronic equipment can cause interference in nearby devices. Randomized modulation of those signals spreads their energy through the frequency spectrum and can help to mitigate electromagnetic interference problems. The inherently random nature of quantum phenomena makes them a good control signal. I present a quantum modulation method based on the random statistics of quantum light. The paper describes pulse width modulation schemes where a Poissonian light source acts as a random control that spreads the energy of the potential interfering signals. I give an example application for switching-mode power supplies and comment the further possibilities of the method.

  1. Photovoltaic module with adhesion promoter

    DOE Patents [OSTI]

    2013-10-08T23:59:59.000Z

    Photovoltaic modules with adhesion promoters and methods for fabricating photovoltaic modules with adhesion promoters are described. A photovoltaic module includes a solar cell including a first surface and a second surface, the second surface including a plurality of interspaced back-side contacts. A first glass layer is coupled to the first surface by a first encapsulating layer. A second glass layer is coupled to the second surface by a second encapsulating layer. At least a portion of the second encapsulating layer is bonded directly to the plurality of interspaced back-side contacts by an adhesion promoter.

  2. Approved Module Information for AM20ME, 2014/5 Module Title/Name: Mechanics Module Code: AM20ME

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Credits: 10 ones. 2. Acquire variety of mathematical tools used in applications. 3. Realize general strategy material effectively in both written and oral form. 2. Structure, order and classify materials, information

  3. Approved Module Information for CH3115, 2014/5 Module Title/Name: Inorganic Chemistry III Module Code: CH3115

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: CH3115 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module is provided. The fields of Homogeneous Catalysis and Heterogeneous Catalysis are introduced and basic aspects homogeneous and heterogenous catalytic process), hydroformylation (homogeneous catalysis), ammonia synthesis

  4. Approved Module Information for CS4520, 2014/5 Module Title/Name: Information Security Module Code: CS4520

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for CS4520, 2014/5 Module Title/Name: Information Security Module Code and understanding of the need for and the underlying principles of information security. The module will enable MSc students to take an active role in the design, planning, evaluation and management of secure information

  5. Approved Module Information for CS3190, 2014/5 Module Title/Name: Information Security Module Code: CS3190

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for CS3190, 2014/5 Module Title/Name: Information Security Module Code for and the underlying principles of information security. By introducing students to key information security concepts to the administration, design, development, evaluation and management of secure information systems. Module Learning

  6. Approved Module Information for LT1301, 2014/5 Module Title/Name: Introduction to Logistics Module Code: LT1301

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for LT1301, 2014/5 Module Title/Name: Introduction to Logistics Module in which available: BSc Logistics with Supply Chain Management. BSc Logistics with Purchasing Management. BSc Logistics with Transport Management. Available to Exchange Students? Not Specified Module Learning

  7. Ultrasound-modulated optical tomography 

    E-Print Network [OSTI]

    Nam, Haewon

    2004-09-30T23:59:59.000Z

    Ultrasound-modulated optical tomography is modeled by a linear integral equation and an inverse problem involving a diffusion equation in n spatial dimensions, n=2, 3. Based on measured data, the optical absorption coefficient ?...

  8. SiC Power Module

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    So the heat sink system can be smaller and can operate the module under self-heating conditions in a room-temperature ambient environment. F igure 9.12 illustrates a...

  9. Spatial modulation: theory to practice 

    E-Print Network [OSTI]

    Younis, Abdelhamid

    2014-06-30T23:59:59.000Z

    Spatial modulation (SM) is a transmission technique proposed for multiple–input multiple– output (MIMO) systems, where only one transmit antenna is active at a time, offering an increase in the spectral efficiency equal ...

  10. Message Flow Modulator Final Report

    E-Print Network [OSTI]

    Boyer, Robert Stephen

    operational environment at the Patuxent River Naval Air Test Center with scenarios developed by an independent in testing and demonstrating the flow modulator at the Patuxent River Naval Air Test Center. #12;MESSAGE FLOW

  11. Message Flow Modulator Final Report

    E-Print Network [OSTI]

    Boyer, Robert Stephen

    operational environment at the Patuxent River Naval Air Test Center with scenarios developed by an independent in testing and demonstrating the flow modulator at the Patuxent River Naval Air Test Center. #12; MESSAGE

  12. Photovoltaic Module Qualification Plus Testing

    SciTech Connect (OSTI)

    Kurtz, S.; Wohlgemuth, J.; Kempe, M.; Bosco, N.; Hacke, P.; Jordan, D.; Miller, D. C.; Silverman, T. J.; Phillips, N.; Earnest, T.; Romero, R.

    2013-12-01T23:59:59.000Z

    This report summarizes a set of test methods that are in the midst of being incorporated into IEC 61215 for certification of a module design or other tests that go beyond certification to establish bankability.

  13. Solar cell module lamination process

    DOE Patents [OSTI]

    Carey, Paul G. (Mountain View, CA); Thompson, Jesse B. (Brentwood, CA); Aceves, Randy C. (Tracy, CA)

    2002-01-01T23:59:59.000Z

    A solar cell module lamination process using fluoropolymers to provide protection from adverse environmental conditions and thus enable more extended use of solar cells, particularly in space applications. A laminate of fluoropolymer material provides a hermetically sealed solar cell module structure that is flexible and very durable. The laminate is virtually chemically inert, highly transmissive in the visible spectrum, dimensionally stable at temperatures up to about 200.degree. C. highly abrasion resistant, and exhibits very little ultra-violet degradation.

  14. Compact magnetic energy storage module

    DOE Patents [OSTI]

    Prueitt, Melvin L. (Los Alamos, NM)

    1994-01-01T23:59:59.000Z

    A superconducting compact magnetic energy storage module in which a plurality of superconducting toroids, each having a toroidally wound superconducting winding inside a poloidally wound superconducting winding, are stacked so that the flow of electricity in each toroidally wound superconducting winding is in a direction opposite from the direction of electrical flow in other contiguous superconducting toroids. This allows for minimal magnetic pollution outside of the module.

  15. Compact magnetic energy storage module

    DOE Patents [OSTI]

    Prueitt, M.L.

    1994-12-20T23:59:59.000Z

    A superconducting compact magnetic energy storage module in which a plurality of superconducting toroids, each having a toroidally wound superconducting winding inside a poloidally wound superconducting winding, are stacked so that the flow of electricity in each toroidally wound superconducting winding is in a direction opposite from the direction of electrical flow in other contiguous superconducting toroids. This allows for minimal magnetic pollution outside of the module. 4 figures.

  16. Wide-range voltage modulation

    SciTech Connect (OSTI)

    Rust, K.R.; Wilson, J.M.

    1992-06-01T23:59:59.000Z

    The Superconducting Super Collider`s Medium Energy Booster Abort (MEBA) kicker modulator will supply a current pulse to the abort magnets which deflect the proton beam from the MEB ring into a designated beam stop. The abort kicker will be used extensively during testing of the Low Energy Booster (LEB) and the MEB rings. When the Collider is in full operation, the MEBA kicker modulator will abort the MEB beam in the event of a malfunction during the filling process. The modulator must generate a 14-{mu}s wide pulse with a rise time of less than 1 {mu}s, including the delay and jitter times. It must also be able to deliver a current pulse to the magnet proportional to the beam energy at any time during ramp-up of the accelerator. Tracking the beam energy, which increases from 12 GeV at injection to 200 GeV at extraction, requires the modulator to operate over a wide range of voltages (4 kV to 80 kV). A vacuum spark gap and a thyratron have been chosen for test and evaluation as candidate switches for the abort modulator. Modulator design, switching time delay, jitter and pre-fire data are presented.

  17. Engagement in Reading and Access to Print: The Relationship of Home and School to Overall Reading Achievement Among Fourth Grade English Speakers 

    E-Print Network [OSTI]

    Allaith, Zainab A.

    2013-04-05T23:59:59.000Z

    The present study puts forward two models which examine the relationship between at home at school variables of (1) engagement in shared and independent reading and (2) access to print with reading achievement. Participants were fourth grade English...

  18. Approved Module Information for AM10SP, 2014/5 Module Title/Name: Statistics and Probability Module Code: AM10SP

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for AM10SP, 2014/5 Module Title/Name: Statistics and Probability Module Code: AM10SP School: Engineering and Applied Science Module Type: Standard Module New Module? No Module of probability and statistics. They should be able to: * solve problems concerning elementary probability

  19. Approved Module Information for AM30ME, 2014/5 Module Title/Name: Classical Mechanics Module Code: AM30ME

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : AM30ME School: Engineering and Applied Science Module Type: Standard Module New Module? No Module in both written and oral form. 2. Structure, order and classify materials, information, dataApproved Module Information for AM30ME, 2014/5 Module Title/Name: Classical Mechanics Module Code

  20. Approved Module Information for PH2504, 2014/5 Module Title/Name: Spectroscopic Analysis of Medicines Module Code: PH2504

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    of Medicines Module Code: PH2504 School: Life and Health Sciences Module Type: Standard Module New Module.fraser@aston.ac.uk Telephone Number Not Specified Office Not Specified Additional Module Tutor(s): Darren Flower. Defang Ouyang Module Learning Information Module Aims: To provide the student with a working knowledge

  1. Approved Module Information for EE3SPR, 2014/5 Module Title/Name: Signal Processing Module Code: EE3SPR

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    3SPR School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Analysis (EE2ESA). Co-requisites: None Specified Module Learning Information Module Aims: To provide tutorials, lab sessions, and case studies Module Assessment Methods of Assessment & associated weighting

  2. Approved Module Information for EE1IOW, 2014/5 Module Title/Name: Introduction to Optics and Waves Module Code: EE1IOW

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Module Code: EE1IOW School: Engineering and Applied Science Module Type: Standard Module New Module? Yes@aston.ac.uk Telephone Number 3548 Office Not Specified Additional Module Tutor(s): Igor Khrushchev. Level DescriptionApproved Module Information for EE1IOW, 2014/5 Module Title/Name: Introduction to Optics and Waves

  3. FACULTY OF ENGINEERING MODULE DESCRIPTION FORM

    E-Print Network [OSTI]

    Mottram, Nigel

    Office Jan 2003) #12;Level of Achievement Statement for a JBM Accredited Engineering Module Module CodeFACULTY OF ENGINEERING MODULE DESCRIPTION FORM CODE CL508/906 Site Investigation & Risk Assessment Module Registrar: Dr P Sentenac Taught To (Course): Civil Engineering Other Lecturers Involved: Credit

  4. WILD TWISTOR D-MODULES CLAUDE SABBAH

    E-Print Network [OSTI]

    Sabbah, Claude

    WILD TWISTOR D-MODULES CLAUDE SABBAH Abstract. We propose a definition of (polarized) wild twistor with proper direct images 14 2.5. Integrability 14 3. Polarizable wild twistor D-modules 15 3.1. Wild and regular (polarizable) twistor D-modules 15 3.2. Some properties of wild twistor D-modules 15 4. Local

  5. Apparatus for encapsulating a photovoltaic module

    DOE Patents [OSTI]

    Albright, Scot P. (El Paso, TX); Dugan, Larry M. (Boulder, CO)

    1995-10-24T23:59:59.000Z

    The subject inventions concern various photovoltaic module designs to protect the module from horizontal and vertical impacts and degradation of solar cell efficiency caused by moisture. In one design, a plurality of panel supports that are positioned adjacent to the upper panel in a photovoltaic module absorb vertical forces exerted along an axis perpendicular to the upper panel. Other designs employ layers of glass and tempered glass, respectively, to protect the module from vertical impacts. A plurality of button-shaped channels is used around the edges of the photovoltaic module to absorb forces applied to the module along an axis parallel to the module and direct moisture away from the module that could otherwise penetrate the module and adversely affect the cells within the module. A spacer is employed between the upper and lower panels that has a coefficient of thermal expansion substantially equivalent to the coefficient of thermal expansion of at least one of the panels.

  6. Quantum vs. Classical Read-once Branching Programs

    E-Print Network [OSTI]

    Martin Sauerhoff

    2005-09-23T23:59:59.000Z

    The paper presents the first nontrivial upper and lower bounds for (non-oblivious) quantum read-once branching programs. It is shown that the computational power of quantum and classical read-once branching programs is incomparable in the following sense: (i) A simple, explicit boolean function on 2n input bits is presented that is computable by error-free quantum read-once branching programs of size O(n^3), while each classical randomized read-once branching program and each quantum OBDD for this function with bounded two-sided error requires size 2^{\\Omega(n)}. (ii) Quantum branching programs reading each input variable exactly once are shown to require size 2^{\\Omega(n)} for computing the set-disjointness function DISJ_n from communication complexity theory with two-sided error bounded by a constant smaller than 1/2-2\\sqrt{3}/7. This function is trivially computable even by deterministic OBDDs of linear size. The technically most involved part is the proof of the lower bound in (ii). For this, a new model of quantum multi-partition communication protocols is introduced and a suitable extension of the information cost technique of Jain, Radhakrishnan, and Sen (2003) to this model is presented.

  7. Approved Module Information for CS1260, 2014/5 Module Title/Name: Mathematics for Computing

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Professionals Module Code: CS1260 School: Engineering and Applied Science Module Type: Standard Module New working with information systems and the ability to find and use new skills when they need them. Module Hours: 100 hours Learning & Teaching Rationale: Lectures/Tutorials Module Assessment Methods

  8. Approved Module Information for CS1150, 2014/5 Module Title/Name: Academic & Professional

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    & Teaching Rationale: Instructional and tutorial classes; practical work Module Assessment Methods Communication Skills Module Code: CS1150 School: Engineering and Applied Science Module Type: Standard Module Email Address burdenc@aston.ac.uk Telephone Number Not Specified Office NW817 Additional Module Tutor

  9. Approved Module Information for LE3025, 2014/5 Module Title/Name: Leadership & Management

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Communication: 2 Module Code: LE3025 School: Languages and Social Sciences Module Type: Standard Module New-oriented communication, research, and publication; apply the knowledge to the production of spoken and written texts both & Management Communication: 1 (LE3024). Co-requisites: None Specified Module Learning Information Module Aims

  10. Approved Module Information for EE3DDT, 2014/5 Module Title/Name: Digital Transmissions and

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for EE3DDT, 2014/5 Module Title/Name: Digital Transmissions and Communication Systems Module Code: EE3DDT School: Engineering and Applied Science Module Type: Standard Module

  11. Holographic Labeling And Reading Machine For Authentication And Security Appications

    DOE Patents [OSTI]

    Weber, David C. (Rancho Santa Margarita, CA); Trolinger, James D. (Costa Mesa, CA)

    1999-07-06T23:59:59.000Z

    A holographic security label and automated reading machine for marking and subsequently authenticating any object such as an identification badge, a pass, a ticket, a manufactured part, or a package is described. The security label is extremely difficult to copy or even to read by unauthorized persons. The system comprises a holographic security label that has been created with a coded reference wave, whose specification can be kept secret. The label contains information that can be extracted only with the coded reference wave, which is derived from a holographic key, which restricts access of the information to only the possessor of the key. A reading machine accesses the information contained in the label and compares it with data stored in the machine through the application of a joint transform correlator, which is also equipped with a reference hologram that adds additional security to the procedure.

  12. NEMS integrating module documentation report

    SciTech Connect (OSTI)

    Not Available

    1993-12-14T23:59:59.000Z

    The National Energy Modeling System (NEMS) is a computer modeling system that produces a general equilibrium solution for energy supply and demand in the US energy markets. The model achieves a supply and demand balance in the end-use demand regions, defined as the nine Census Divisions, by solving for the prices of each energy type such that the quantities producers are willing to supply equal the quantities consumers wish to consume. The system reflects market economics, industry structure, and energy policies and regulations that influence market behavior. The NEMS Integrating Module is the central integrating component of a complex modeling system. As such, a thorough understanding of its role in the modeling process can only be achieved by placing it in the proper context with respect to the other modules. To that end, this document provides an overview of the complete NEMS model, and includes brief descriptions of the modules with which the Integrating Module interacts. The emphasis and focus, however, is on the structure and function of the Integrating Module of NEMS.

  13. Solid-state membrane module

    DOE Patents [OSTI]

    Gordon, John Howard (Salt Lake City, UT); Taylor, Dale M. (Murray, UT)

    2011-06-07T23:59:59.000Z

    Solid-state membrane modules comprising at least one membrane unit, where the membrane unit has a dense mixed conducting oxide layer, and at least one conduit or manifold wherein the conduit or manifold comprises a dense layer and at least one of a porous layer and a slotted layer contiguous with the dense layer. The solid-state membrane modules may be used to carry out a variety of processes including the separating of any ionizable component from a feedstream wherein such ionizable component is capable of being transported through a dense mixed conducting oxide layer of the membrane units making up the membrane modules. For ease of construction, the membrane units may be planar.

  14. Progress of MICE RFCC Module

    SciTech Connect (OSTI)

    Li, D.; Bowring, D.; DeMello, A.; Gourlay, S.; Green, M.; Li, N.; Niinikoski, T.; Pan, H.; Prestemon, S.; Virostek, S.; Zisman, M.; Bross, A.; Carcagno, R.; Kashikhin, V.; Sylvester, C.; Chen, A.B.; Guo, Bin; Li, Liyi; Xu, Fengyu; Cao, Y.; Sun, S.; Wang, Li; Yin, Lixin; Luo, Tianhuan; Summers, Don; Smith, B.; Radovinsky, A.; Zhukovsky, A.; Kaplan, D.

    2012-05-20T23:59:59.000Z

    Recent progress on the design and fabrication of the RFCC (RF and superconducting Coupling Coil) module for the international MICE (Muon Ionization Cooling Experiment) are reported. The MICE ionization cooling channel has two RFCC modules, each having four 201- MHz normal conducting RF cavities surrounded by one superconducting coupling coil (solenoid) magnet. The magnet is designed to be cooled by three cryocoolers. Fabrication of the RF cavities is complete; preparation for the cavity electro-polishing, low power RF measurements, and tuning are in progress at Lawrence Berkeley National Laboratory (LBNL). Fabrication of the cold mass of the first coupling coil magnet has been completed in China and the cold mass arrived at LBNL in late 2011. Preparations for testing the cold mass are currently under way at Fermilab. Plans for the RFCC module assembly and integration are being developed and are described.

  15. Active combustion flow modulation valve

    DOE Patents [OSTI]

    Hensel, John Peter; Black, Nathaniel; Thorton, Jimmy Dean; Vipperman, Jeffrey Stuart; Lambeth, David N; Clark, William W

    2013-09-24T23:59:59.000Z

    A flow modulation valve has a slidably translating hollow armature with at least one energizable coil wound around and fixably attached to the hollow armature. The energizable coil or coils are influenced by at least one permanent magnet surrounding the hollow armature and supported by an outer casing. Lorentz forces on the energizable coils which are translated to the hollow armature, increase or decrease the flow area to provide flow throttling action. The extent of hollow armature translation depends on the value of current supplied and the direction of translation depends on the direction of current flow. The compact nature of the flow modulation valve combined with the high forces afforded by the actuator design provide a flow modulation valve which is highly responsive to high-rate input control signals.

  16. Programmable Multi-Chip Module

    SciTech Connect (OSTI)

    Kautz, David (Lenexa, KS); Morgenstern, Howard (Lee's Summit, MO); Blazek, Roy J. (Overland Park, KS)

    2005-05-24T23:59:59.000Z

    A multi-chip module comprising a low-temperature co-fired ceramic substrate having a first side on which are mounted active components and a second side on which are mounted passive components, wherein this segregation of components allows for hermetically sealing the active components with a cover while leaving accessible the passive components, and wherein the passive components are secured using a reflow soldering technique and are removable and replaceable so as to make the multi-chip module substantially programmable with regard to the passive components.

  17. Programmable multi-chip module

    SciTech Connect (OSTI)

    Kautz, David; Morgenstern, Howard; Blazek, Roy J.

    2004-03-02T23:59:59.000Z

    A multi-chip module comprising a low-temperature co-fired ceramic substrate having a first side on which are mounted active components and a second side on which are mounted passive components, wherein this segregation of components allows for hermetically sealing the active components with a cover while leaving accessible the passive components, and wherein the passive components are secured using a reflow soldering technique and are removable and replaceable so as to make the multi-chip module substantially programmable with regard to the passive components.

  18. Programmable Multi-Chip Module

    DOE Patents [OSTI]

    Kautz, David (Lenexa, KS); Morgenstern, Howard (Lee's Summit, MO); Blazek, Roy J. (Overland Park, KS)

    2004-11-16T23:59:59.000Z

    A multi-chip module comprising a low-temperature co-fired ceramic substrate having a first side on which are mounted active components and a second side on which are mounted passive components, wherein this segregation of components allows for hermetically sealing the active components with a cover while leaving accessible the passive components, and wherein the passive components are secured using a reflow soldering technique and are removable and replaceable so as to make the multi-chip module substantially programmable with regard to the passive components.

  19. Module title Financial Management Module code INT3605

    E-Print Network [OSTI]

    Mumby, Peter J.

    accounting in monitoring, controlling and planning an organisation's activities. You will develop: Module-specific skills 1. demonstrate understanding of internal management accounts and a company for application in future work place situations #12;ILO: Discipline-specific skills 3. analyse critically

  20. Module No: 410121Introduction to Commercial Module Title

    E-Print Network [OSTI]

    Lecture Time Programme of Study: Daytime & Evening Study E-mailOffice Number Office Phone Academic rank Instructor Name E-mailOffice Number Office Phone Academic rank Module coordinator 306209LecturerMs. Manal procedures and specialization 5. develop students capacity to write articles, reports and research papers

  1. Module No: 410336Personal Statutes for Non-Module Title

    E-Print Network [OSTI]

    Study E-mailOffice Number Office Phone Academic rank Instructor Name E-mailOffice Number Office Phone Academic rank Module coordinator 307384Assistant Professor Dr. Fuad Sartawi ResearchTutorial Guidance, etc... 3. develop students skills in writing research papers, articles and reports about subjects

  2. The Cultural Power of Law? Conjunctive Readings Bill Maurer

    E-Print Network [OSTI]

    Brody, James P.

    The Cultural Power of Law? Conjunctive Readings Bill Maurer Sally Merry's (1999) Colonizing Hawai'i: The Cultural Power of Law provides a compelling account of the cultural transformation of the Kingdom of Hawaii: Adulterers had the ``choice'' to work off their sentences by building roads for the chiefs. And people deemed

  3. CE 668 Urban Public Transportation Systems Reading List

    E-Print Network [OSTI]

    Hickman, Mark

    1 CE 668 Urban Public Transportation Systems Reading List General Reference Alan Black, Urban Mass Transportation Planning. New York: McGraw-Hill, 1995. Canadian Urban Transit Association, The Canadian Transit.), Public Transportation. Englewood Cliffs: Prentice-Hall, 1992. Vukan Vuchic, Urban Public Transportation

  4. Functional Genomics: It's All How You Read It

    E-Print Network [OSTI]

    Boguski, Mark S.

    Functional Genomics: It's All How You Read It Philip Hieter and Mark Boguski "Functional genomics to functional genomics? An informal poll of colleagues indicates that the term is widely used, but has many genomics websites that have sprung up over the last 12 months clearly demonstrates that interpretations

  5. Energy From the Sun ( Rookie Read About Science)

    E-Print Network [OSTI]

    Ohta, Shigemi

    Energy From the Sun ( Rookie Read About Science) By Alan Fowler Age Range: 5 and up Grade Level Series: Green Power Hardcover: 64 pages Bibliography Solar Power (Energy for Today) Age Range: 7 and up Grade Level: 2 and up Series: Energy for Today Paperback: 24 pages Done In The Sun Anne Hillerman Age

  6. Optical fuel pin scanner. [Patent application; for reading identifications

    DOE Patents [OSTI]

    Kirchner, T.L.; Powers, H.G.

    1980-12-09T23:59:59.000Z

    This patent relates to an optical identification system developed for post-irradiation disassembly and analysis of fuel bundle assemblies. The apparatus is designed to be lowered onto a stationary fuel pin to read identification numbers or letters imprinted on the circumference of the top fuel pin and cap. (DLC)

  7. Urban Pollution Control Strategies Reading: pages 422-437

    E-Print Network [OSTI]

    Toohey, Darin W.

    ATOC 3500 Urban Pollution Control Strategies Reading: pages 422-437 Details to come #12;#12;Urban Pollution Control Strategies What we know so far: · Different regions have different issues, but two types, warm, NOx, HCs, ozone, CO) · Pollution is made worse by meteorological conditions called "inversions

  8. Light and Matter: Reading Messages from the Cosmos

    E-Print Network [OSTI]

    Crenshaw, Michael

    1 Chapter 5 Light and Matter: Reading Messages from the Cosmos How do we experience light? · The warmth of sunlight tells us that light is a form of energy · We can measure the amount of energy emitted ) Colors of Light · White light is made up of many different colors How do light and matter interact

  9. Unlocking Short Read Sequencing for Metagenomics Sebastien Rodrigue.

    E-Print Network [OSTI]

    Entekhabi, Dara

    and computational pipeline yielding millions of reads that can exceed 200 bp with quality scores approaching that of traditional Sanger sequencing. The method combines an automatable gel-less library construction step (FQRNT) (www.fqrnt.gouv.qc.ca). The funders had no role in study design, data collection and analysis

  10. Knowledge Transfer Centre University of Reading, Whiteknights, Reading, RG6 6AH Tel: +44 (0)118 378 8628 Email: workingwithbusiness@reading.ac.uk www.reading.ac.uk/working-with-business

    E-Print Network [OSTI]

    Reading, University of

    -house knowledge Brownell, a mall industrial enterprise, required access to expertise in polymer science. e Board ns. The University of Reading has research expertise in polymer and materials science, humidity indicators, pressure relief v purge systems that prevent moisture and atmosphe electronic optic

  11. Approved Module Information for AM10AS, 2014/5 Module Title/Name: Academic Writing and Study Skills Module Code: AM10AS

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : Instructional and tutorial classes; practical work Module Assessment Methods of Assessment & associated Module Code: AM10AS School: Engineering and Applied Science Module Type: Standard Module New Module@aston.ac.uk Telephone Number Not Specified Office NW817 Additional Module Tutor(s): Emily Waibel. Level Description

  12. Approved Module Information for AM20MM, 2014/5 Module Title/Name: Mathematical Methods Module Code: AM20MM

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : AM20MM School: Engineering and Applied Science Module Type: Standard Module New Module? No Module students with the necessary basic mathematical tools required in more advanced modules to solve standard of science and engineering. #12;Module Learning Outcomes: Knowledge and Understanding 1. Review and reinforce

  13. Approved Module Information for AM30CA, 2014/5 Module Title/Name: Complex Analysis Module Code: AM30CA

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    30CA School: Engineering and Applied Science Module Type: Standard Module New Module? No Module@aston.ac.uk Telephone Number Not Specified Office Not Specified Additional Module Tutor(s): . Level Description: Level 6/subject-specific skills - Analytical Skills. Indicative Module Content: Algebraic structure of the complex numbers

  14. Approved Module Information for EC102C, 2014/5 Module Title/Name: Construction Technology Module Code: EC102C

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: EC102C School: Engineering and Applied Science Module Type: Standard Module New Module? No Module@aston.ac.uk Telephone Number Not Specified Office Not Specified Additional Module Tutor(s): Gayan Wedawatta. Level Assessment Rationale: Assessment is designed to meet module learning outcomes. The material covered by the 2

  15. Approved Module Information for AM30CD, 2014/5 Module Title/Name: Chaos and Dynamical Systems Module Code: AM30CD

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Module Code: AM30CD School: Engineering and Applied Science Module Type: Standard Module New Module Module Aims: The aims of AM30CD are to provide the necessary mathematical tools to support the study hours Total Learning Hours: 100 hours Learning & Teaching Rationale: Lectures/Tutorials Module

  16. Approved Module Information for AM20LM, 2014/5 Module Title/Name: Linear Mathematics Module Code: AM20LM

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : AM20LM School: Engineering and Applied Science Module Type: Standard Module New Module? No Module this module, students will consolidate their ability to work with vectors and vector spaces, and be familiar: Lectures and Tutorials Module Assessment Methods of Assessment & associated weighting (including approaches

  17. Approved Module Information for AM30PD, 2014/5 Module Title/Name: Partial Differential Equations Module Code: AM30PD

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Module Code: AM30PD School: Engineering and Applied Science Module Type: Standard Module New Module@aston.ac.uk Telephone Number Not Specified Office Not Specified Additional Module Tutor(s): W Cox. Level Description: Lectures/Tutorials Module Assessment Methods of Assessment & associated weighting (including approaches

  18. Module 7: Fuel Cell Bus Maintenance | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    principles of conventional service procedures fcm07r0.pdf More Documents & Publications Module 5: Fuel Cell Systems Module 6: Fuel Cell Engine Safety Module 2: Hydrogen Use...

  19. High Heat Flux Thermoelectric Module Using Standard Bulk Material...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Heat Flux Thermoelectric Module Using Standard Bulk Material High Heat Flux Thermoelectric Module Using Standard Bulk Material Presents high heat flux thermoelectric module design...

  20. Titel des Moduls: Elektrische Energiesysteme

    E-Print Network [OSTI]

    Wichmann, Felix

    , Drehfeld, Asynchronmaschine, Synchronmaschine, Schutz elektrischer Anlagen und Netze. 3. ModulbestandteileTitel des Moduls: Elektrische Energiesysteme LP (ECTS): 6 Kurzbezeichnung: B-ET-EA-EE.W12 elektrischer Energiesysteme und sind in der Lage, Messungen an realen Systemen durchzuführen und ihre

  1. Titel des Moduls: Elektrische Netzwerke

    E-Print Network [OSTI]

    Wichmann, Felix

    Titel des Moduls: Elektrische Netzwerke LP (ECTS): 6 Kurzbezeichnung: BET-GL-ENW. W12 Netz- werkschaltungen beherrschen. Hierbei werden statische Vorgänge mit Gleich- und Wechselsignalen) Semester (WiSe / SoSe) Elektrische Netzwerke VL 2 6 P SoSeUE 1 PR 1 4. Beschreibung der Lehr- und

  2. BA War & Society Module Information

    E-Print Network [OSTI]

    Harman, Neal.A.

    BA War & Society Module Information 2014-2015 www.swansea.ac.uk/artsandhumanities Arts Studies BA War & Society BA War & Society The scope and scale of the BA (Hons) War and Society degree Theories of War 1 (compulsory) HUA102 War and Warfare in the Modern World (compulsory) HIH118 World History

  3. Approved Module Information for ME1600, 2014/5 Module Title/Name: Electronic Engineering Foundations Module Code: ME1600

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for ME1600, 2014/5 Module Title/Name: Electronic Engineering is to provide an introduction to electronic circuits and electronic engineering and develop the experimental * Enhanced information gathering skills for electronic engineering #12;Indicative Module Content: *Part 1 DC

  4. Approved Module Information for CS2150, 2014/5 Module Title/Name: Computer Graphics Module Code: CS2150

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for CS2150, 2014/5 Module Title/Name: Computer Graphics Module Code: CS in 3D computer graphics, both the theory and mathematics that underpin it, and a practical knowledge components required for 3D graphics. * Sufficient knowledge of the mathematics and theory to understand how

  5. Approved Module Information for CE2105, 2014/5 Module Title/Name: Process Simulation Module Code: CE2105

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    the program to processes in chemicals manufacturing, power generation and petrochemical refiningApproved Module Information for CE2105, 2014/5 Module Title/Name: Process Simulation Module Code * Familiarity with the widely used process flowsheeting program AspenPlus. * The opportunity to apply

  6. PV module mounting method and mounting assembly

    DOE Patents [OSTI]

    Lenox, Carl J.S.; Johnson, Kurt M.

    2013-04-23T23:59:59.000Z

    A method for mounting PV modules to a deck includes selecting PV module layout pattern so that adjacent PV module edges are spaced apart. PV mounting and support assemblies are secured to the deck according to the layout pattern using fasteners extending into the deck. The PV modules are placed on the PV mounting and support assemblies. Retaining elements are located over and secured against the upper peripheral edge surfaces of the PV modules so to secure them to the deck with the peripheral edges of the PV modules spaced apart from the deck. In some examples a PV module mounting assembly, for use on a shingled deck, comprises flashing, a base mountable on the flashing, a deck-penetrating fastener engageable with the base and securable to the deck so to secure the flashing and the base to the shingled deck, and PV module mounting hardware securable to the base.

  7. Mounting support for a photovoltaic module

    DOE Patents [OSTI]

    Brandt, Gregory Michael; Barsun, Stephan K.; Coleman, Nathaniel T.; Zhou, Yin

    2013-03-26T23:59:59.000Z

    A mounting support for a photovoltaic module is described. The mounting support includes a foundation having an integrated wire-way ledge portion. A photovoltaic module support mechanism is coupled with the foundation.

  8. Reliability Issues for Photovoltaic Modules (Presentation)

    SciTech Connect (OSTI)

    Kurtz, S.

    2009-10-01T23:59:59.000Z

    Si modules good in field; new designs need reliability testing. CdTe & CIGS modules sensitive to moisture; carefully seal. CPV in product development stage; benefits from expertise in other industries.

  9. Development of ultra-broadband modulators

    E-Print Network [OSTI]

    Shamir, Orit A

    2008-01-01T23:59:59.000Z

    Optical signal modulation is a cornerstone of communication, allowing the transfer of information by electrically encoding data onto an optical carrier. Modulation with ultra-broadband capability enables the generation of ...

  10. The Effectiveness of Shared Reading Interventions with Families of Hispanic Prekindergarten Students 

    E-Print Network [OSTI]

    Hasbun, Tracey

    2012-02-14T23:59:59.000Z

    The purpose of this study was to examine the effects of parent or caregiver shared-reading interventions on Hispanic prekindergarten students’ language and literacy scores. In addition, this study investigated the effects of shared reading...

  11. Linking Family Background and Home Language with English Reading Comprehension amog Bi/Multilinguals 

    E-Print Network [OSTI]

    Yulia, Astri

    2013-04-24T23:59:59.000Z

    The purpose of this study is to examine the links between family background and home language factors on English reading achievement among bi/multilingual students. To explore the potential predictors of English reading achievement among bi...

  12. English as a second language teachers' perceptions and use of classroom-based reading assessment. 

    E-Print Network [OSTI]

    Jia, Yueming

    2006-04-12T23:59:59.000Z

    The purpose of this study was to explore ESL teachersÂ? perceptions and use of classroom-based reading assessments. The research questions underpinning this study were: 1) What types of classroom-based reading assessments ...

  13. An fMRI study of multimodal semantic and phonological processing in reading disabled adolescents

    E-Print Network [OSTI]

    2009 /Accepted: 11 September 2009 # The International Dyslexia Association 2009 Abstract Using Dyslexia . fMRI . Performance . Phonology. Reading disability. Semantics Introduction The neurobiology of reading disability An increasing body of research suggests that the core deficit in developmental dyslexia

  14. Traces on Module Categories over Fusion Categories

    E-Print Network [OSTI]

    Gregor Schaumann

    2015-01-27T23:59:59.000Z

    We consider traces on module categories over pivotal fusion categories which are compatible with the module structure. It is shown that such module traces characterise the Morita classes of special haploid symmetric Frobenius algebras. Moreover, they are unique up to a scale factor and they equip the dual category with a pivotal structure. This implies that for each pivotal structure on a fusion category over the complex numbers there exists a conjugate pivotal structure defined by the canonical module trace.

  15. Pressure vs. decibel modulation in spectrotemporal representations

    E-Print Network [OSTI]

    Simon, Jonathan Z.

    by the inverse-repeat method) relative to the that of the linearized response. Nominal Stimulus Modulation-Inverted

  16. A Stability of LCLS Linac Modulators

    SciTech Connect (OSTI)

    Decker, F.-J.; Krasnykh, A.; Morris, B.; Nguyen, M.; /SLAC

    2012-06-13T23:59:59.000Z

    Information concerning to a stability of LCLS RF linac modulators is allocated in this paper. In general a 'pulse-to-pulse' modulator stability (and RF phase as well) is acceptable for the LCLS commission and FEL programs. Further modulator stability improvements are possible and approaches are discussed based on our experimental results.

  17. FACULTY OF ENGINEERING MODULE DESCRIPTION FORM

    E-Print Network [OSTI]

    Mottram, Nigel

    Level: NQF 3 Prerequisites: none Module Format and Delivery (hours): Lecture Tutorial Assignments Visits visualisation). Uncovering the role of science and mathematics in the design of structures using case studyFACULTY OF ENGINEERING MODULE DESCRIPTION FORM CL 112 Introduction to Civil Engineering Module Code

  18. Neurofibromin Regulation of ERK Signaling Modulates

    E-Print Network [OSTI]

    Silva, Alcino

    Neurofibromin Regulation of ERK Signaling Modulates GABA Release and Learning Yijun Cui,1 Rui M@mednet.ucla.edu DOI 10.1016/j.cell.2008.09.060 SUMMARY We uncovered a role for ERK signaling in GABA re- lease, long demonstrate that neurofibromin modulates ERK/synapsin I-dependent GABA re- lease, which in turn modulates

  19. Lossless intensity modulation in integrated photonics

    E-Print Network [OSTI]

    Fan, Shanhui

    volume silicon mi- croring modulator," Opt. Express 18, 18235­18242 (2010). 12. A. Yariv, "Critical modulators," Nat. Photonics 4, 518­526 (2010). 2. A. Liu, R. Jones, L. Liao, D. Samara-Rubio1, D. Rubin, O. Cohen, R. Nicolaescu, and M. Paniccia, "A high-speed silicon optical modulator based on a metal

  20. MODULES OVER A PID KEITH CONRAD

    E-Print Network [OSTI]

    Lozano-Robledo, Alvaro

    MODULES OVER A PID KEITH CONRAD Every vector space over a field K that has a finite spanning set modules have bases. But when A is a PID, we get something nearly as good as that: (1) Every submodule a PID sits inside the free module. Then we'll learn how to count with ideals in place of positive

  1. Emittance growth from electron beam modulation

    SciTech Connect (OSTI)

    Blaskiewicz, M.

    2009-12-01T23:59:59.000Z

    In linac ring colliders like MeRHIC and eRHIC a modulation of the electron bunch can lead to a modulation of the beam beam tune shift and steering errors. These modulations can lead to emittance growth. This note presents simple formulas to estimate these effects which generalize some previous results.

  2. Draft: Module handbook PhD Program in Experimental Medicine Code Module Coordinator ECTS

    E-Print Network [OSTI]

    Tübingen, Universität

    1 Draft: Module handbook PhD Program in Experimental Medicine Code Module Coordinator ECTS Module Elements Ges. Compulsory Modules: PEX-01 Research in Experimental Medicine Pichler 5 PEX-02 Ph - Intermediate reports PEX-03 Progress report and/or Journal club (in students department) Supervisor in dept. 3

  3. Approved Module Information for PH3704, 2014/5 Module Title/Name: Quality Assured Pharmaceutical

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    and processes, including the use of Standard Operating Procedures, Good Laboratory Practice, Good Pharmaceutical Technology Module Code: PH3704 School: Life and Health Sciences Module Type: Standard Module New Module of these materials. · To describe the role of quality assurance in the maintenance of the quality of pharmaceutical

  4. Approved Module Information for PH2507, 2014/5 Module Title/Name: Professional, Workplace & Scientific

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Email Address flowerdr@aston.ac.uk Telephone Number 5182 Office Not Specified Additional Module Tutor

  5. Interface module for transverse energy input to dye laser modules

    DOE Patents [OSTI]

    English, R.E. Jr.; Johnson, S.A.

    1994-10-11T23:59:59.000Z

    An interface module for transverse energy input to dye laser modules is provided particularly for the purpose of delivering enhancing transverse energy beams in the form of illumination bar to the lasing zone of a dye laser device, in particular to a dye laser amplifier. The preferred interface module includes an optical fiber array having a plurality of optical fibers arrayed in a co-planar fashion with their distal ends receiving coherent laser energy from an enhancing laser source, and their proximal ends delivered into a relay structure. The proximal ends of the optical fibers are arrayed so as to be coplanar and to be aimed generally at a common point. The transverse energy beam array delivered from the optical fiber array is acted upon by an optical element array to produce an illumination bar which has a cross section in the form of a elongated rectangle at the position of the lasing window. The illumination bar is selected to have substantially uniform intensity throughout. 5 figs.

  6. Method and apparatus for pulse width modulation control of an AC induction motor

    DOE Patents [OSTI]

    Geppert, Steven (Bloomfield Hills, MI); Slicker, James M. (Union Lake, MI)

    1984-01-01T23:59:59.000Z

    An inverter is connected between a source of DC power and a three-phase AC induction motor, and a micro-processor-based circuit controls the inverter using pulse width modulation techniques. In the disclosed method of pulse width modulation, both edges of each pulse of a carrier pulse train are equally modulated by a time proportional to sin .THETA., where .THETA. is the angular displacement of the pulse center at the motor stator frequency from a fixed reference point on the carrier waveform. The carrier waveform frequency is a multiple of the motor stator frequency. The modulated pulse train is then applied to each of the motor phase inputs with respective phase shifts of 120.degree. at the stator frequency. Switching control commands of electronic switches in the inverter are stored in a random access memory (RAM) and the locations of the RAM are successively read out in a cyclic manner, each bit of a given RAM location controlling a respective phase input of the motor. The DC power source preferably comprises rechargeable batteries and all but one of the electronic switches in the inverter can be disabled, the remaining electronic switch being part of a "flyback" DC-DC converter circuit for recharging the battery.

  7. Degradation Pathway Models for Photovoltaics Module Lifetime Performance

    E-Print Network [OSTI]

    Rollins, Andrew M.

    Degradation Pathway Models for Photovoltaics Module Lifetime Performance Nicholas R. Wheeler, Laura data from Underwriter Labs, featuring measurements taken on 18 identical photovoltaic (PV) modules in modules and their effects on module performance over lifetime. Index Terms--photovoltaics, statistical

  8. Exploration of Short Reads Genome Mapping in Hardware Edward Fernandez, Walid Najjar

    E-Print Network [OSTI]

    Lonardi, Stefano

    Exploration of Short Reads Genome Mapping in Hardware Edward Fernandez, Walid Najjar Department, such as Illumina/Solexa Genome Analyzer and ABI SOLiD, can generate hundreds of millions of short DNA "reads" from a single run. These reads must be matched against a reference genome to identify their original location

  9. Reading of DNA Sequence Logos: Prediction of Major Groove Binding by Information

    E-Print Network [OSTI]

    Schneider, Thomas D.

    Reading of DNA Sequence Logos: Prediction of Major Groove Binding by Information Theory Thomas D: http://www.lecb.ncifcrf.gov/~toms/how.to.read.sequence.logos/index.html running title: Reading Sequence Logos #3; National Cancer Institute, Frederick Cancer Research and Development Center, Lab- oratory

  10. Module Encapsulant Diagnostic and Modeling

    SciTech Connect (OSTI)

    Kempe, M.

    2005-01-01T23:59:59.000Z

    Encapsulant materials are used in photovoltaic devices for mechanical support, electrical isolation, and protection against corrosion. The ability of an encapsulant to protect against surface corrosion is related to its adhesional strength. The adhesion of candidate encapsulants under accelerated environmental stress was examined to determine what materials have the best hydrolytic stability and are more likely to reduce corrosion rates. Under environmental exposure, the ingress of water has been correlated with increased corrosion rates. The diffusivity of different encapsulants has been measured to determine how long it takes for water to enter a module. The high diffusivity of ethylene vinyl acetate indicates that, even with the use of an impermeable back-sheet, moisture from the sides will diffuse throughout the entire module. To significantly reduce moisture ingress requires a true hermetic seal, the use of an encapsulant loaded with desiccant, or the use of a very low diffusivity encapsulant.

  11. Gas separation membrane module assembly

    DOE Patents [OSTI]

    Wynn, Nicholas P (Palo Alto, CA); Fulton, Donald A. (Fairfield, CA)

    2009-03-31T23:59:59.000Z

    A gas-separation membrane module assembly and a gas-separation process using the assembly. The assembly includes a set of tubes, each containing gas-separation membranes, arranged within a housing. The housing contains a tube sheet that divides the space within the housing into two gas-tight spaces. A permeate collection system within the housing gathers permeate gas from the tubes for discharge from the housing.

  12. Dynamics and Bifurcations Reading: Section 8.6

    E-Print Network [OSTI]

    Beer, Randall D.

    Dynamics and Bifurcations on a Torus Reading: Section 8.6 #12;IU/COGS-Q580/Beer Two-Dimensional Surfaces Sphere Torus Plane Cylinder Möbius Strip Klein Bottle Double Torus #12;IU/COGS-Q580/Beer Dynamical Consequences of Topology #12;IU/COGS-Q580/Beer Pairs of Oscillators Live on a Torus 1 2 1 2 #12;IU/COGS-Q580

  13. OscilloscopeMOM packetReadingNumber msg

    E-Print Network [OSTI]

    Xie, Tao

    ReadingNumber; // shared variable #11: // uint8_t lock = 0; #12: TOS_Msg msg;// shared variable #13: taskvoid task4; #29: pack >channel = 1; #30: pack >sourceMoteID = TOS_LOCAL_ADDRESS; #31: if (call SendMsg.send(TOS result_t SendMsg.sendDone(TOS_MsgPtr sent, result_t success) { #53: // atomic lock = 0; /* notify

  14. Apparatuses and methods for laser reading of thermoluminescent phosphors

    DOE Patents [OSTI]

    Braunlich, Peter F. (SW. 730 City View, Pullman, WA 99163); Tetzlaff, Wolfgang (Pullman, WA)

    1989-01-01T23:59:59.000Z

    Apparatuses and methods for rapidly reading thermoluminescent phosphors to determine the amount of luminescent energy stored therein. The stored luminescent energy is interpreted as a measure of the total exposure of the thermoluminescent phosphor to ionizing radiation. The thermoluminescent phosphor reading apparatus uses a laser to generate a laser beam. The laser beam power level is monitored by a laser power detector and controlled to maintain the power level at a desired value or values which can vary with time. A shutter or other laser beam interrupting means is used to control exposure of the thermoluminescent phosphor to the laser beam. The laser beam can be equalized using an opitcal equalizer so that the laser beam has an approximately uniform power density across the beam. The heated thermoluminescent phosphor emits a visible or otherwise detectable luminescent emission which is measured as an indication of the radiation exposure of the thermoluminscent phosphors. Also disclosed are preferred signal processing and control circuits including one system using a digital computer. Also disclosed are time-profiled laser power cycles for pre-anneal, read and post-anneal treatment of phosphors.

  15. Read/write head for a magnetic tape device having grooves for reducing tape floating

    DOE Patents [OSTI]

    Aoki, Kenji (Kawasaki, JP)

    2005-08-09T23:59:59.000Z

    A read/write head for a magnetic tape includes an elongated chip assembly and a tape running surface formed in the longitudinal direction of the chip assembly. A pair of substantially spaced parallel read/write gap lines for supporting read/write elements extend longitudinally along the tape running surface of the chip assembly. Also, at least one groove is formed on the tape running surface on both sides of each of the read/write gap lines and extends substantially parallel to the read/write gap lines.

  16. Approved Module Information for ME4501, 2014/5 Module Title/Name: Computational Fluid Dynamics and

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    and Applications Module Code: ME4501 School: Engineering and Applied Science Module Type: Standard Module New-requisites: Thermodynamics and Fluids (ME3011). Engineering Mathematics 2 (AM21EM). Co-requisites: None Specified ModuleApproved Module Information for ME4501, 2014/5 Module Title/Name: Computational Fluid Dynamics

  17. Approved Module Information for EE2DPS, 2014/5 Module Title/Name: Digital and Programmable Electronic

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Electronic Systems Module Code: EE2DPS School: Engineering and Applied Science Module Type: Standard ModuleApproved Module Information for EE2DPS, 2014/5 Module Title/Name: Digital and Programmable to Exchange Students? Not Specified Module Dependancies Pre-requisites: Sequential State Machines (EE2SSM). Co

  18. Approved Module Information for CS2260, 2014/5 Module Title/Name: Human-Computer Interaction Module Code: CS2260

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: CS2260 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module groupwork-based tutorials are used to structures students' application of theory from the lectures with tutorial activites Module Assessment Methods of Assessment & associated weighting (including approaches

  19. Approved Module Information for AM20SR, 2014/5 Module Title/Name: Stochastic Processes Module Code: AM20SR

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : AM20SR School: Engineering and Applied Science Module Type: Standard Module New Module? No Module to work with appropriate probability distributions as required. 2.Be able to interpret problems using Hours: 100 hours Learning & Teaching Rationale: Lectures and Tutorials Module Assessment Methods

  20. Approved Module Information for AM10IM, 2014/5 Module Title/Name: Introduction to Matlab Module Code: AM10IM

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Code: AM10IM School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Rationale: Lectures and tutorials/lab Module Assessment Methods of Assessment & associated weighting pieces of written work) to returned to the School Coursework Office. Examination 70% January Examination

  1. Approved Module Information for AM20AA, 2014/5 Module Title/Name: Abstract Algebra Module Code: AM20AA

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    20AA School: Engineering and Applied Science Module Type: Standard Module New Module? No Module, of a range of results and theorems in the indicative module content (see below) 2. Be able to apply and algebraic structures. 2. Enhance the students? understanding of the need for and nature of rigorous

  2. Approved Module Information for EE4PEL, 2014/5 Module Title/Name: Power Electronics Module Code: EE4PEL

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    waveforms and calculate switching losses. * Use of oscilloscopes and meters to measure waveforms in powerApproved Module Information for EE4PEL, 2014/5 Module Title/Name: Power Electronics Module Code: EE Credits: 10 Module Management Information Module Leader Name Andrew Cross Email Address a

  3. Approved Module Information for EC307C, 2014/5 Module Title/Name: Green Building Module Code: EC307C

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for EC307C, 2014/5 Module Title/Name: Green Building Module Code: EC307 construction; * Conventional and novel materials appropriate for green building; Professional Module Learning Information Module Aims: By building on previous knowledge and experience, to develop

  4. Approved Module Information for EC316C, 2014/5 Module Title/Name: Facilities Management Module Code: EC316C

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Level Agreements within Facilities Management ? Quality and Contract Management in Facilities ManagementApproved Module Information for EC316C, 2014/5 Module Title/Name: Facilities Management Module Code Credits: 10 Module Management Information Module Leader Name Yakubu Olawale Email Address olawalya

  5. Thermodynamic properties of a magnetically modulated graphene

    E-Print Network [OSTI]

    SK Firoz Islam; Naveen K. Singh; Tarun Kanti Ghosh

    2011-09-12T23:59:59.000Z

    The effect of magnetic modulation on thermodynamic properties of a graphene monolayer in presence of a constant perpendicular magnetic field is reported here. One-dimensional spatial electric or magnetic modulation lifts the degeneracy of the Landau levels and converts into bands and their band width oscillates with magnetic field leading to Weiss-type oscillation in the thermodynamic properties. The effect of magnetic modulation on thermodynamic properties of a graphene sheet is studied and then compared with electrically modulated graphene and magnetically modulated conventional two-dimensional electron gas (2DEG). We observe Weiss-type and de Haas-van Alphen (dHvA) oscillations at low and high magnetic field, respectively. There is a definite phase difference in Weiss-type oscillations in thermodynamic quantities of magnetically modulated graphene in compare to electrically modulated graphene. On the other hand, the phase remains same and amplitude of the oscillation is large when compared with the magnetically modulated 2DEG. Explicit asymptotic expressions of density of states and the Helmholtz free energy are provided to understand the phase and amplitude of the Weiss-type oscillations qualitatively. We also study thermodynamic properties when both electric and magnetic modulations are present. The Weiss-type oscillations still exist when the modulations are out-of-phase.

  6. Modules over principal ideal rings

    E-Print Network [OSTI]

    Vieaux, Jules Bellin

    1957-01-01T23:59:59.000Z

    957 Na)or Sub]sot: Nathematics MODULES OVER PRINCIPAL IDEAL RINGS A Thesis Jules Bellin Vieaux Approved as to style and content by: (Chairman of Committee) (Head of Department r Student Advisor) August 1957 ACKNOWLEDGMENT I would like... to express my sincere appreciation to Dr. W. E. Koss and Dr. E. R. Keown for their aid and d. irection in the writing of this thesis. J ~ BE V TABLE OP CONTENTS Preface ~ ~ + ~ o ~ ~ ~ o ~ ~ oeooe ~ ~ ~ ~oo ~ a ~ oo ~ o ~ oo. o. . e 1 I. Principal...

  7. Modules over principal ideal rings 

    E-Print Network [OSTI]

    Vieaux, Jules Bellin

    1957-01-01T23:59:59.000Z

    need to note, however, , the difference between the two types of "union" of a set of submodules N 1 of a module N, The first is the "set-theoretic union" con- sisting of representatives of all the distinct elements to be found in the Ni... ideal R, which cons1sts of the elements of the ring. Consider the subset B of R of all elements of the form ra + na, where r and a are ring ele- ments and n is an integer. If rla + nla, r2a + n2a s B, then la + nla 2 2a la r2a + la 2 = (rl - r2)a...

  8. module 4 | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015ofDepartment of EnergyThePatricia2012)HR5 TRANSITION BRIEFING module 4 More

  9. Power module assemblies with staggered coolant channels

    DOE Patents [OSTI]

    Herron, Nicholas Hayden; Mann, Brooks S; Korich, Mark D

    2013-07-16T23:59:59.000Z

    A manifold is provided for supporting a power module assembly with a plurality of power modules. The manifold includes a first manifold section. The first face of the first manifold section is configured to receive the first power module, and the second face of the first manifold section defines a first cavity with a first baseplate thermally coupled to the first power module. The first face of the second manifold section is configured to receive the second power module, and the second face of the second manifold section defines a second cavity with a second baseplate thermally coupled to the second power module. The second face of the first manifold section and the second face of the second manifold section are coupled together such that the first cavity and the second cavity form a coolant channel. The first cavity is at least partially staggered with respect to second cavity.

  10. Approved Module Information for CS1040, 2014/5 Module Title/Name: Multimedia Software and Applications Module Code: CS1040

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    #12;Indicative Module Content: Multimedia concepts, development, hardware, software lifecycle and animation Multimedia and the Internet Software development using suitable multimedia software packagesApproved Module Information for CS1040, 2014/5 Module Title/Name: Multimedia Software

  11. An ultrafast carbon nanotube terahertz polarisation modulator

    SciTech Connect (OSTI)

    Docherty, Callum J.; Stranks, Samuel D.; Habisreutinger, Severin N.; Joyce, Hannah J.; Herz, Laura M.; Nicholas, Robin J.; Johnston, Michael B., E-mail: m.johnston@physics.ox.ac.uk [Department of Physics, University of Oxford, Clarendon Laboratory, Parks Road, Oxford OX1 3PU (United Kingdom)

    2014-05-28T23:59:59.000Z

    We demonstrate ultrafast modulation of terahertz radiation by unaligned optically pumped single-walled carbon nanotubes. Photoexcitation by an ultrafast optical pump pulse induces transient terahertz absorption in nanowires aligned parallel to the optical pump. By controlling the polarisation of the optical pump, we show that terahertz polarisation and modulation can be tuned, allowing sub-picosecond modulation of terahertz radiation. Such speeds suggest potential for semiconductor nanowire devices in terahertz communication technologies.

  12. Optical sensing based on wavelength modulation spectroscopy

    DOE Patents [OSTI]

    Buckley, Steven G. (Redmond, WA); Gharavi, Mohammadreza (Tehran, IR); Borchers; Marco (Berlin, DE)

    2011-06-28T23:59:59.000Z

    Techniques, apparatus and systems for using Wavelength Modulation Spectroscopy measurements to optically monitor gas media such as gases in gas combustion chambers.

  13. Module Encapsulation Materials, Processing and Testing (Presentation...

    Office of Scientific and Technical Information (OSTI)

    Energy operated by the Alliance for Sustainable Energy, LLC Module Encapsulation Materials, Processing and Testing John Pern, Ph.D. National Center for Photovoltaics (NCPV)...

  14. Solid State Marx Modulators for Emerging Applications

    SciTech Connect (OSTI)

    Kemp, M.A.; /SLAC

    2012-09-14T23:59:59.000Z

    Emerging linear accelerator applications increasingly push the boundaries of RF system performance and economics. The power modulator is an integral part of RF systems whose characteristics play a key role in the determining parameters such as efficiency, footprint, cost, stability, and availability. Particularly within the past decade, solid-state switch based modulators have become the standard in high-performance, high power modulators. One topology, the Marx modulator, has characteristics which make it particularly attractive for several emerging applications. This paper is an overview of the Marx topology, some recent developments, and a case study of how this architecture can be applied to a few proposed linear accelerators.

  15. Integrated Performance Testing Workshop, Modules 6 - 11

    SciTech Connect (OSTI)

    Leach, Janice; Torres, Teresa M.

    2012-10-01T23:59:59.000Z

    These modules cover performance testing of: Interior Detection Systems; Access Controls; Exterior Detection Systems; Video Assessment Systems; SNM / Contraband Detection Systems; Access Delay Elements

  16. Sandia National Laboratories: PV module development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    module development Sandians Win 'Best Paper' Award at Photovoltaic Conference in Japan On March 4, 2015, in Computational Modeling & Simulation, Energy, Facilities, News, News &...

  17. Name of Module: Optical Remote Sensing

    E-Print Network [OSTI]

    Wichmann, Felix

    calibration, pre-processing of satellite images, arithmetic image operations, principal axis transform, image textures, microwave systems, radar with synthetic aperture (SAR) 3. Module Components Course Name

  18. Dense optical-electrical interface module

    SciTech Connect (OSTI)

    Paul Chang

    2000-12-21T23:59:59.000Z

    The DOIM (Dense Optical-electrical Interface Modules) is a custom-designed optical data transmission module employed in the upgrade of Silicon Vertex Detector of CDF experiment at Fermilab. Each DOIM module consists of a transmitter (TX) converting electrical differential input signals to optical outputs, a middle segment of jacketed fiber ribbon cable, and a receiver (RX) which senses the light inputs and converts them back to electrical signals. The targeted operational frequency is 53 MHz, and higher rate is achievable. This article outlines the design goals, implementation methods, production test results, and radiation hardness tests of these modules.

  19. Alternative Energy Sources -- An Interdisciplinary Module for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Sources - An Interdisciplinary Module for Energy Education Grades: 5-8 Topic: Energy Basics, Wind Energy, Solar Owner: Earth Science Department at the University of Northern...

  20. Advanced Low Temperature Absorption Chiller Module Integrated...

    Broader source: Energy.gov (indexed) [DOE]

    Advanced Low Temperature Absorption Chiller Module Integrated with a CHP System at a Distributed Data Center - Presentation by Exergy Partners Corp., June 2011 Advanced Low...

  1. In-line thermoelectric module

    DOE Patents [OSTI]

    Pento, Robert (Algonquin, IL); Marks, James E. (Glenville, NY); Staffanson, Clifford D. (S. Glens Falls, NY)

    2000-01-01T23:59:59.000Z

    A thermoelectric module with a plurality of electricity generating units each having a first end and a second end, the units being arranged first end to second end along an in-line axis. Each unit includes first and second elements each made of a thermoelectric material, an electrically conductive hot member arranged to heat one side of the first element, and an electrically conductive cold member arranged to cool another side of the first element and to cool one side of the second element. The hot member, the first element, the cold member and the second element are supported in a fixture, are electrically connected respectively to provide an electricity generating unit, and are arranged respectively in positions along the in-line axis. The individual components of each generating unit and the respective generating units are clamped in their in-line positions by a loading bolt at one end of the fixture and a stop wall at the other end of the fixture. The hot members may have a T-shape and the cold members an hourglass shape to facilitate heat transfer. The direction of heat transfer through the hot members may be perpendicular to the direction of heat transfer through the cold members, and both of these heat transfer directions may be perpendicular to the direction of current flow through the module.

  2. Approved Module Information for PH2502, 2014/5 Module Title/Name: Pharmaceutical

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Credits: 20 Module Management Information Module Leader Name Deborah Lowry Email Address lowryd: To provide students with a background knowledge and understanding of microbiology. The range of microbes by microbes, disinfection and sterilisation, testing and evaluation of sterility and preservation

  3. A pilot study of reading to improve self-esteem

    E-Print Network [OSTI]

    Bagnall, Norma Hayes

    1977-01-01T23:59:59.000Z

    to Children' s Reading, 3rd ed. (Ne Y rrr: pookeee rs hhoDay anan~o. , 1969), p. 9. Charlotte S. Huck, Children's Literature in the Ele entary Hoh ol, trite VoOr: HHoY, KXne~raan i~ns on, 1976), p. 26. 6 Ruth Strang, "Zvaluation oi Development...~ing from the repressed to the outgoing stage in his relationships with other children. Q estion ~e' ht: "HHo d es he rele*e * ther children in a work/study situation?" measures 17 whether or not the child can be depended on to oarry out assigned tasks...

  4. Chaotic Dynamics Reading: Chapters 9, 10, 11, 12

    E-Print Network [OSTI]

    Beer, Randall D.

    Chaotic Dynamics Reading: Chapters 9, 10, 11, 12 #12;IU/COGS-Q580/Beer The Lorenz Attractor -10 0 #12;IU/COGS-Q580/Beer S0 S1 S2 S3 S4 S5 S6 0 1 0 1 Cantor Set S ... Detour: Fractals #12;IU/COGS-Q580/Beer Detour: Similarity Dimension d = lnm lnr d = ln2 ln2 =1 d = ln4 ln2 = 2 d = ln2 ln3 0.63 m

  5. Limit Cycles in the Plane Reading: Chapter 7

    E-Print Network [OSTI]

    Beer, Randall D.

    Limit Cycles in the Plane Reading: Chapter 7 #12;IU/COGS-Q580/Beer Oscillatory Solutions 0 5 10 15 - x2 !x2 = f2 x1,x2( ) = -x2 3 + x2 2 + x1 #12;IU/COGS-Q580/Beer Limit Cycles t(L) = L -1 -0.5 0 0.5 1/Beer Limit Cycles -1 -0.5 0 0.5 1 x1 -1 -0.5 0 0.5 1 x2 Dxf = 1 2 - 3x1 2 -1 1 1 2 - 3x2 2 1

  6. Port Reading, New Jersey: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratiniEdwards, Wisconsin: EnergyReading, New Jersey: Energy

  7. How to Read Your Electric Meter | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking of Blythe Solar PowerCommercialEnergy Star|documentHow toHow to Read Your

  8. MATH 101A: ALGEBRA I PART B: RINGS AND MODULES 35 9. Modules over a PID

    E-Print Network [OSTI]

    Igusa, Kiyoshi

    MATH 101A: ALGEBRA I PART B: RINGS AND MODULES 35 9. Modules over a PID This week we are proving the fundamental theorem for finitely gener- ated modules over a PID, namely that they are all direct sums in correct logical order. 9.1. torsion and torsion-free. Suppose that R is a PID and M is a finitely

  9. Approved Module Information for LE3024, 2014/5 Module Title/Name: Leadership & Management

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Communication: 1 Module Code: LE3024 School: Languages and Social Sciences Module Type: Standard Module New the internet for business-oriented communication, research, and publication; apply the knowledge and management texts, and ii) to develop and use a range of leadership communication skills; iii) reflect

  10. Efficient Electro-Optical Modulation Based on Indium Tin Oxide

    E-Print Network [OSTI]

    Shi, Kaifeng

    2015-01-01T23:59:59.000Z

    We experimentally demonstrate several electro-optical modulators based on transparent conducting oxides. Our previous work demonstrated the modulator structure on glass substrate with broadband bias polarity-dependent modulation. Further exploration shows similar modulation effect of the modulator on quartz and silicon substrate.

  11. General Message Flow Modulator Ann E. Siebert

    E-Print Network [OSTI]

    Boyer, Robert Stephen

    General Message Flow Modulator Ann E. Siebert Donald I. Good Technical Report #42 March 1984 (512) 471-1901 #12;Abstract The general message flow modulator is a high level design of a family of mechanisms for controlling the flow of messages from a source to a destination. This family of mechanisms has

  12. Chemical Reactor Models of Digestion Modulation

    E-Print Network [OSTI]

    Logan, David

    Chemical Reactor Models of Digestion Modulation William Wolesensky & J. David Logan Department give an overview of the application of chemical reactor theory to models of digestion processes and indicate how those models extend to eco-physiological questions of modulation of digestion and feeding

  13. Development Status of the ILC Marx Modulator

    SciTech Connect (OSTI)

    Nguyen, M.; Beukers, T.; Burkhart, C.; Larsen, R.; Olsen, J.; Tang, T.; /SLAC

    2008-06-16T23:59:59.000Z

    The ILC Marx Modulator is under development as a lower cost alternative to the 'Baseline Conceptual Design' (BCD) klystron modulator. Construction of a prototype Marx is complete and testing is underway at SLAC. The Marx employs solid state elements, IGBTs and diodes, to control the charge, discharge and isolation of the modules. The prototype is based on a stack of sixteen modules, each initially charged to {approx}11 kV, which are arranged in a Marx topology. Initially, eleven modules combine to produce the 120 kV output pulse. The remaining modules are switched in after appropriate delays to compensate for the voltage droop that results from the discharge of the energy storage capacitors. Additional elements will further regulate the output voltage to {+-} 0.5%. The Marx presents several advantages over the conventional klystron modulator designs. It is physically smaller; there is no pulse transformer (quite massive at these parameters) and the energy storage capacitor bank is quite small, owing to the active droop compensation. It is oil-free; voltage hold-off is achieved using air insulation. It is air cooled; the secondary air-water heat exchanger is physically isolated from the electronic components. This paper outlines the current developmental status of the prototype Marx. It presents a detailed electrical and mechanical description of the modulator and operational test results. It will discuss electrical efficiency measurements, fault testing, and output voltage regulation.

  14. Development Status of The ILC Marx Modulator

    SciTech Connect (OSTI)

    Nguyen, M; Beukers, T.; Burkhart, C.; Larsen, R.; Olsen, J.; Tang, T.; /SLAC; ,

    2010-06-07T23:59:59.000Z

    The ILC Marx Modulator is under development as a lower cost alternative to the 'Baseline Conceptual Design' (BCD) klystron modulator. Construction of a prototype Marx is complete and testing is underway at SLAC. The Marx employs solid state elements, IGBTs and diodes, to control the charge, discharge and isolation of the modules. The prototype is based on a stack of sixteen modules, each initially charged to {approx}11 kV, which are arranged in a Marx topology. Initially, eleven modules combine to produce the 120 kV output pulse. The remaining modules are switched in after appropriate delays to compensate for the voltage droop that results from the discharge of the energy storage capacitors. Additional elements will further regulate the output voltage to {+-}0.5%. The Marx presents several advantages over the conventional klystron modulator designs. It is physically smaller; there is no pulse transformer (quite massive at these parameters) and the energy storage capacitor bank is quite small, owing to the active droop compensation. It is oil-free; voltage hold-off is achieved using air insulation. It is air cooled; the secondary air-water heat exchanger is physically isolated from the electronic components. This paper outlines the current developmental status of the prototype Marx. It presents a detailed electrical and mechanical description of the modulator and operational test results. It will discuss electrical efficiency measurements, fault testing, and output voltage regulation.

  15. Modulated optical vortices Jennifer E. Curtis 1

    E-Print Network [OSTI]

    Grier, David

    Modulated optical vortices Jennifer E. Curtis 1 and David G. Grier Dept. of Physics, James Franck-beam optical gradient force traps created by focusing helical modes of light are known as optical vortices. Modulating the helical pitch of such a modes' wavefront yields a new class of optical traps whose dynamically

  16. Analysis and Design of Smart PV Module 

    E-Print Network [OSTI]

    Mazumdar, Poornima

    2012-12-10T23:59:59.000Z

    This thesis explores the design of a smart photovoltaic (PV) module- a PV module in which PV cells in close proximity are electrically grouped to form a pixel and are connected to dc-dc converter blocks which reside embedded in the back pane...

  17. EELE408 Photovoltaics Lecture 17 Photovoltaic Modules

    E-Print Network [OSTI]

    Kaiser, Todd J.

    1 EELE408 Photovoltaics Lecture 17 Photovoltaic Modules Dr. Todd J. Kaiser tjkaiser to temperature effects and other non ideal conditions · Allows for voltage drops across other PV system components · Requires 15 V to charge a 12 V battery 10 Module Current · Depends primarily on size of solar

  18. Analysis and Design of Smart PV Module

    E-Print Network [OSTI]

    Mazumdar, Poornima

    2012-12-10T23:59:59.000Z

    This thesis explores the design of a smart photovoltaic (PV) module- a PV module in which PV cells in close proximity are electrically grouped to form a pixel and are connected to dc-dc converter blocks which reside embedded in the back pane...

  19. Testing Protocol for Module Encapsulant Creep (Presentation)

    SciTech Connect (OSTI)

    Kempe, M. D.; Miller, D. C.; Wohlgemuth, J. H.; Kurtz, S. R.; Moseley, J. M.; Shah, Q.; Tamizhmani, G.; Sakurai, K.; Inoue, M.; Doi, T.; Masuda, A.

    2012-02-01T23:59:59.000Z

    Recently there has been an interest in the use of thermoplastic encapsulant materials in photovoltaic modules to replace chemically crosslinked materials, e.g., ethylene-vinyl acetate. The related motivations include the desire to: reduce lamination time or temperature; use less moisture-permeable materials; or use materials with better corrosion characteristics. However, the use of any thermoplastic material in a high-temperature environment raises safety and performance concerns, as the standardized tests currently do not expose the modules to temperatures in excess of 85C, yet modules may experience temperatures above 100C in operation. Here we constructed eight pairs of crystalline-silicon modules and eight pairs of glass/encapsulation/glass mock modules using different encapsulation materials of which only two were designed to chemically crosslink. One module set was exposed outdoors with insulation on the back side in Arizona in the summer, and an identical set was exposed in environmental chambers. High precision creep measurements and performance measurements indicate that despite many of these polymeric materials being in the melt state at some of the highest outdoor temperatures achievable, very little creep was seen because of their high viscosity, temperature heterogeneity across the modules, and in the case of the crystalline-silicon modules, the physical restraint of the backsheet. These findings have very important implications for the development of IEC and UL qualification and safety standards, and in regards to the necessary level of cure during the processing of crosslinking encapsulants.

  20. Module Handbook Core Univ. of Oldenburg

    E-Print Network [OSTI]

    Habel, Annegret

    Energy Conversion Process · Location Dependence of Wind Energy Potential and Wind Energy Forecasting/EUREC Course 2008/2009 #12;EUREC Core Courses at University of Oldenburg, 1st Semester Wind Energy Module Module Description: Wind Energy Field: Core Oldenburg Courses: Wind Energy Wind Energy

  1. automatic gas meter-reading: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Last Page Topic Index 1 Neighborhood Watch: Security and Privacy Analysis of Automatic Meter Reading Systems Engineering Websites Summary: in transforming the current electrical...

  2. Mapping single molecule sequencing reads using basic local alignment with successive refinement (BLASR): application and theory

    E-Print Network [OSTI]

    Chaisson, Mark J; Tesler, Glenn

    2012-01-01T23:59:59.000Z

    Instead, methods such as Bowtie, Bwa, and Soap2 are used [4-and Lagan crashed, while Bowtie did not accept the read

  3. Ion transport membrane module and vessel system

    DOE Patents [OSTI]

    Stein, VanEric Edward (Allentown, PA); Carolan, Michael Francis (Allentown, PA); Chen, Christopher M. (Allentown, PA); Armstrong, Phillip Andrew (Orefield, PA); Wahle, Harold W. (North Canton, OH); Ohrn, Theodore R. (Alliance, OH); Kneidel, Kurt E. (Alliance, OH); Rackers, Keith Gerard (Louisville, OH); Blake, James Erik (Uniontown, OH); Nataraj, Shankar (Allentown, PA); van Doorn, Rene Hendrik Elias (Obersulm-Willsbach, DE); Wilson, Merrill Anderson (West Jordan, UT)

    2008-02-26T23:59:59.000Z

    An ion transport membrane system comprising (a) a pressure vessel having an interior, an exterior, an inlet, and an outlet; (b) a plurality of planar ion transport membrane modules disposed in the interior of the pressure vessel and arranged in series, each membrane module comprising mixed metal oxide ceramic material and having an interior region and an exterior region, wherein any inlet and any outlet of the pressure vessel are in flow communication with exterior regions of the membrane modules; and (c) one or more gas manifolds in flow communication with interior regions of the membrane modules and with the exterior of the pressure vessel.The ion transport membrane system may be utilized in a gas separation device to recover oxygen from an oxygen-containing gas or as an oxidation reactor to oxidize compounds in a feed gas stream by oxygen permeated through the mixed metal oxide ceramic material of the membrane modules.

  4. Ion transport membrane module and vessel system

    DOE Patents [OSTI]

    Stein, VanEric Edward (Allentown, PA); Carolan, Michael Francis (Allentown, PA); Chen, Christopher M. (Allentown, PA); Armstrong, Phillip Andrew (Orefield, PA); Wahle, Harold W. (North Canton, OH); Ohrn, Theodore R. (Alliance, OH); Kneidel, Kurt E. (Alliance, OH); Rackers, Keith Gerard (Louisville, OH); Blake, James Erik (Uniontown, OH); Nataraj, Shankar (Allentown, PA); Van Doorn, Rene Hendrik Elias (Obersulm-Willsbach, DE); Wilson, Merrill Anderson (West Jordan, UT)

    2012-02-14T23:59:59.000Z

    An ion transport membrane system comprising (a) a pressure vessel having an interior, an exterior, an inlet, and an outlet; (b) a plurality of planar ion transport membrane modules disposed in the interior of the pressure vessel and arranged in series, each membrane module comprising mixed metal oxide ceramic material and having an interior region and an exterior region, wherein any inlet and any outlet of the pressure vessel are in flow communication with exterior regions of the membrane modules; and (c) one or more gas manifolds in flow communication with interior regions of the membrane modules and with the exterior of the pressure vessel. The ion transport membrane system may be utilized in a gas separation device to recover oxygen from an oxygen-containing gas or as an oxidation reactor to oxidize compounds in a feed gas stream by oxygen permeated through the mixed metal oxide ceramic material of the membrane modules.

  5. CHARGED PARTICLE IDENTIFICATION WITH MODULES OF THE PLASTIC BALL

    E-Print Network [OSTI]

    Gutbrod, H.H.

    2010-01-01T23:59:59.000Z

    WITH MODULES OF THE PLASTIC BALL H.H. Gutbrod, M.R. Maier,WITH MODULES OF THE PLASTIC BALL H.H. Gutbrod, M.R. Maier*,of modules of the Plastic Ball detector for positive pions

  6. Approved Module Information for BN3389, 2014/5 Module Title/Name: Theory & Practice of eCommerce Module Code: BN3389

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Content: Week number Topics 1 Introduction to the module 2 Web Development basics 3-4 Software development & Teaching Rationale: Group work: the module design assumes that, in their final year, have the skillsApproved Module Information for BN3389, 2014/5 Module Title/Name: Theory & Practice of e

  7. Approved Module Information for EC211C, 2014/5 Module Title/Name: Estimation, Measurement & Scheduling Module Code: EC211C

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    & Scheduling Module Code: EC211C School: Engineering and Applied Science Module Type: Standard Module New Address s.h.park@aston.ac.uk Telephone Number Not Specified Office Not Specified Additional Module Tutor practice and scheduling using planning and control tools and techniques to evaluate students? own work

  8. Approved Module Information for EC114C, 2014/5 Module Title/Name: BIM for Construction Module Code: EC114C

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : EC114C School: Engineering and Applied Science Module Type: Standard Module New Module? Yes Module package Intellectual Skills i. Conveying 3D structural information in a standard 2D/3D format used when BIM including 2D/3D drawings is implemented. Links to Research: BIM is one of tools that I

  9. Approved Module Information for EE2CSY, 2014/5 Module Title/Name: Communication Systems Module Code: EE2CSY

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    ) Programmes in which available: BEng Electrical and Electronic Engineering. MEng Electrical and Electronic Engineering. BEng Electronic Engineering and Computer Science. MEng Electronic Engineering and Computer: EE2CSY School: Engineering and Applied Science Module Type: Standard Module New Module? No Module

  10. Approved Module Information for CE1009, 2014/5 Module Title/Name: Introduction to Transfer Processes Module Code: CE1009

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    of fluid mechanics Indicative Module Content: Part A: Mass and Enrgy balances ? Introduction to mass

  11. Approved Module Information for BN1135, 2014/5 Module Title/Name: Principles of Operations Management Module Code: BN1135

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    the role of quality management and TQM for improving the quality of a firm?s products and services operations? Quality Management ? Why quality is so important? ? What does quality mean? ? TQM & Continuous Management Module Code: BN1135 School: Aston Business School Module Type: Standard Module New Module

  12. Approved Module Information for BS2248, 2014/5 Module Title/Name: Introduction to Econometrics 2 Module Code: BS2248

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for BS2248, 2014/5 Module Title/Name: Introduction to Econometrics 2 Dependancies Pre-requisites: Introduction to Econometrics 1 (BS2247). Co-requisites: None Specified Module Learning Information Module Aims: To introduce the fundamental econometric theories and techniques

  13. Study on PID Resistance of HIT PV Modules

    Broader source: Energy.gov (indexed) [DOE]

    2013 Photovoltaic Module Reliability Workshop NREL, Golden, CO February 26-27, 2013 Study on PID resistance of HIT PV modules Tasuku Ishiguro 1 , Hiroshi Kanno 1 , Mikio...

  14. annual modulation effect: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    an annual modulation in the WIMP direct detection rate. If the local WIMP velocity distribution is isotropic then the modulation is roughly sinusoidal with maximum in June,...

  15. Characterization of Dynamic Loads on Solar Modules with Respect...

    Broader source: Energy.gov (indexed) [DOE]

    "Interdependency of mechanical failure rate of encapsulated module laminate (for EVA) solar cells and module design parameters", Proc. SPIE Optics & Photonics, 2012 0 10 20 30 40...

  16. SunShot Presentation PV Module Reliabity Workshop Opening Session...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Presentation PV Module Reliabity Workshop Opening Session SunShot Presentation PV Module Reliabity Workshop Opening Session This PowerPoint slide deck was originally presented at...

  17. Energy Efficiency at Home - An Interdisciplinary Module for Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    at Home - An Interdisciplinary Module for Energy Education Energy Efficiency at Home - An Interdisciplinary Module for Energy Education Below is information about the student...

  18. Module Embedded Microinverter Smart Grid Ready Residential Solar...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    is developing and demonstrating a cost-reduction approach for an alternating-current (AC) photovoltaic (PV) module that is driven by innovations in microinverter design, module...

  19. Materials and Modules for Low Cost, High Performance Fuel Cell...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Modules for Low Cost, High Performance Fuel Cell Humidifiers Materials and Modules for Low Cost, High Performance Fuel Cell Humidifiers Presented at the Department of Energy Fuel...

  20. V-186: Drupal Login Security Module Security Bypass and Denial...

    Office of Environmental Management (EM)

    186: Drupal Login Security Module Security Bypass and Denial of Service Vulnerability V-186: Drupal Login Security Module Security Bypass and Denial of Service Vulnerability June...

  1. activity modulates codon: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for photovoltaic module efficiency of 33.9% (active area). The latest prototype module Photovoltaic Systems (ISFOC) in Puertollano, Spain, the efficiency significantly exceeds...

  2. activation modulates radioresistance: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for photovoltaic module efficiency of 33.9% (active area). The latest prototype module Photovoltaic Systems (ISFOC) in Puertollano, Spain, the efficiency significantly exceeds...

  3. activity modulates recovery: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for photovoltaic module efficiency of 33.9% (active area). The latest prototype module Photovoltaic Systems (ISFOC) in Puertollano, Spain, the efficiency significantly exceeds...

  4. activity modulates myeloid: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for photovoltaic module efficiency of 33.9% (active area). The latest prototype module Photovoltaic Systems (ISFOC) in Puertollano, Spain, the efficiency significantly exceeds...

  5. activation requires modulation: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for photovoltaic module efficiency of 33.9% (active area). The latest prototype module Photovoltaic Systems (ISFOC) in Puertollano, Spain, the efficiency significantly exceeds...

  6. akt activation modulates: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for photovoltaic module efficiency of 33.9% (active area). The latest prototype module Photovoltaic Systems (ISFOC) in Puertollano, Spain, the efficiency significantly exceeds...

  7. advanced modulation formats: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Websites Summary: Advanced Techniques for the Creation and Propagation of Modules in Cartesian Genetic Programming) advanced techniques for module creation and propagation...

  8. Characterization of Dynamic Loads on Solar Modules with Respect...

    Broader source: Energy.gov (indexed) [DOE]

    Characterization of Dynamic Loads on Solar Modules with Respect to Fracture of Solar Cells Characterization of Dynamic Loads on Solar Modules with Respect to Fracture of Solar...

  9. Materials, Modules, and Systems: An Atoms to Autos Approach to...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Materials, Modules, and Systems: An Atoms to Autos Approach to Automotive Thermoelectric Systems Development Materials, Modules, and Systems: An Atoms to Autos Approach to...

  10. Method and apparatus for reading free falling dosimeter punchcodes

    DOE Patents [OSTI]

    Langsted, James M. (Golden, CO)

    1992-12-22T23:59:59.000Z

    A punchcode reader is provided for reading data encoded in a punchcode hole array on a dosimeter. The dosimeter falls through a passage in the reader containing photosensor detectors disposed along the passage which provide output signals to a microprocessor. The signals are processed to determine the orientation of the dosimeter in the reader, the location and state of punchcode holes in a two row array thereby decoding the encoded data. Multiple rate of fall calculations are made, and if appropriate matching of the punchcode array is not obtained in three tries, an error signal is outputted to the operator. The punchcode reader also provides for storage of data from multiple dosimeters passed through the reader, and for the output of decoded data to an external display or a computer for further processing.

  11. Method and apparatus for reading free falling dosimeter punchcodes

    DOE Patents [OSTI]

    Langsted, J.M.

    1992-12-22T23:59:59.000Z

    A punchcode reader is provided for reading data encoded in a punchcode hole array on a dosimeter. The dosimeter falls through a passage in the reader containing photosensor detectors disposed along the passage which provide output signals to a microprocessor. The signals are processed to determine the orientation of the dosimeter in the reader, the location and state of punchcode holes in a two row array thereby decoding the encoded data. Multiple rate of fall calculations are made, and if appropriate matching of the punchcode array is not obtained in three tries, an error signal is output to the operator. The punchcode reader also provides for storage of data from multiple dosimeters passed through the reader, and for the output of decoded data to an external display or a computer for further processing. 8 figs.

  12. Method and apparatus for reading meters from a video image

    DOE Patents [OSTI]

    Lewis, Trevor J. (Irwin, PA); Ferguson, Jeffrey J. (North Huntingdon, PA)

    1997-01-01T23:59:59.000Z

    A method and system to enable acquisition of data about an environment from one or more meters using video images. One or more meters are imaged by a video camera and the video signal is digitized. Then, each region of the digital image which corresponds to the indicator of the meter is calibrated and the video signal is analyzed to determine the value indicated by each meter indicator. Finally, from the value indicated by each meter indicator in the calibrated region, a meter reading is generated. The method and system offer the advantages of automatic data collection in a relatively non-intrusive manner without making any complicated or expensive electronic connections, and without requiring intensive manpower.

  13. Criticality calculations for Step-2 GPHS modules.

    SciTech Connect (OSTI)

    Hensen, Danielle Lynn; Lipinski, Ronald J.

    2007-08-01T23:59:59.000Z

    The Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) will use an improved version of the General Purpose Heat Source (GPHS) module as its source of thermal power. This new version, referred to as the Step-2 GPHS Module, has additional and thicker layers of carbon fiber material (Fine Weaved Pierced Fabric) for increased strength over the original GPHS module. The GPHS uses alpha decay of {sup 238}Pu in the oxide form as the primary source of heat, and small amounts of other actinides are also present in the oxide fuel. Criticality calculations have been performed by previous researchers on the original version of the GPHS module (Step 0). This paper presents criticality calculations for the present Step-2 version. The Monte Carlo N-Particle eXtended code (MCNPX) was used for these calculations. Numerous configurations of GPHS module arrays surrounded by wet sand and other materials (to reflect the neutrons back into the stack with minimal absorption) were modeled. For geometries with eight GPHS modules (from a single MMRTG) surrounded by wet sand, the configuration is extremely sub-critical; k{sub eff} is about 0.3. It requires about 1000 GPHS modules (from 125 MMRTGs) in a close-spaced stack to approach criticality (k{sub eff} = 1.0) when surrounded by wet sand. The effect of beryllium in the MMRTG was found to be relatively small.

  14. Criticality Calculations for Step-2 GPHS Modules

    SciTech Connect (OSTI)

    Lipinski, Ronald J. [Advanced Nuclear Concepts Department, Sandia National Laboratories, P.O Box 5800, Albuquerque, NM 87185 (United States); Hensen, Danielle L. [Risk and Reliability Department Sandia National Laboratories, P.O Box 5800, Albuquerque, NM 87185 (United States)

    2008-01-21T23:59:59.000Z

    The Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) will use an improved version of the General Purpose Heat Source (GPHS) module as its source of thermal power. This new version, referred to as the Step-2 GPHS Module, has additional and thicker layers of carbon fiber material (Fine Weaved Pierced Fabric) for increased strength over the original GPHS module. The GPHS uses alpha decay of {sup 238}Pu in the oxide form as the primary source of heat, and small amounts of other actinides are also present in the oxide fuel. Criticality calculations have been performed by previous researchers on the original version of the GPHS module (Step 0). This paper presents criticality calculations for the present Step-2 version. The Monte Carlo N-Particle eXtended code (MCNPX) was used for these calculations. Numerous configurations of GPHS module arrays surrounded by wet sand and other materials (to reflect the neutrons back into the stack with minimal absorption) were modeled. For geometries with eight GPHS modules (from a single MMRTG) surrounded by wet sand, the configuration is extremely sub-critical; k{sub eff} is about 0.3. It requires about 1000 GPHS modules (from 125 MMRTGs) in a close-spaced stack to approach criticality (k{sub eff} = 1.0) when surrounded by wet sand. The effect of beryllium in the MMRTG was found to be relatively small.

  15. Skew chicane based betatron eigenmode exchange module

    DOE Patents [OSTI]

    Douglas, David (Yorktown, VA)

    2010-12-28T23:59:59.000Z

    A skewed chicane eigenmode exchange module (SCEEM) that combines in a single beamline segment the separate functionalities of a skew quad eigenmode exchange module and a magnetic chicane. This module allows the exchange of independent betatron eigenmodes, alters electron beam orbit geometry, and provides longitudinal parameter control with dispersion management in a single beamline segment with stable betatron behavior. It thus reduces the spatial requirements for multiple beam dynamic functions, reduces required component counts and thus reduces costs, and allows the use of more compact accelerator configurations than prior art design methods.

  16. Microscale autonomous sensor and communications module

    DOE Patents [OSTI]

    Okandan, Murat; Nielson, Gregory N

    2014-03-25T23:59:59.000Z

    Various technologies pertaining to a microscale autonomous sensor and communications module are described herein. Such a module includes a sensor that generates a sensor signal that is indicative of an environmental parameter. An integrated circuit receives the sensor signal and generates an output signal based at least in part upon the sensor signal. An optical emitter receives the output signal and generates an optical signal as a function of the output signal. An energy storage device is configured to provide power to at least the integrated circuit and the optical emitter, and wherein the module has a relatively small diameter and thickness.

  17. Ensuring Quality of PV Modules: Preprint

    SciTech Connect (OSTI)

    Kurtz, S.; Wohlgemuth, J.; Hacke, P.; Kempe, M.; Sample, T.; Yamamichi, M.; Kondo, M.; Doi, T.; Otani, K.; Amano, J.

    2011-07-01T23:59:59.000Z

    Photovoltaic (PV) customers need to have confidence in the PV modules they purchase. Currently, no test can quantify a module's lifetime with confidence, but stress tests are routinely used to differentiate PV product designs. We suggest that the industry would be strengthened by using the wisdom of the community to develop a single set of tests that will help customers quantify confidence in PV products. This paper evaluates the need for quality assurance (QA) standards and suggests a path for creating these. Two types of standards are needed: 1) QA of the module design and 2) QA of the manufacturing process.

  18. Amplitude modulation of wind turbine noise

    E-Print Network [OSTI]

    Makarewicz, Rufin

    2013-01-01T23:59:59.000Z

    Due to swish and thump amplitude modulation, the noise of wind turbines cause more annoyance than other environmental noise of the same average level. The wind shear accounts for the thump modulation (van den Berg effect). Making use of the wind speed measurements at the hub height, as well as at the top and the bottom of the rotor disc (Fig.1), the non-standard wind profile is applied. It causes variations in the A-weighted sound pressure level, LpA. The difference between the maximum and minimum of LpA characterizes thump modulation (Fig.2).

  19. Beyond brain reading: randomized sparsity and clustering to simultaneously predict and identify

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Beyond brain reading: randomized sparsity and clustering to simultaneously predict and identify A from functional MRI (fMRI) is known as brain reading. From a statistical standpoint, this challenge by the classifier are relevant, one cannot state that these voxels form the brain regions involved in the cognitive

  20. Page Number Step 1: Enter OASIS, Read Notices & Announcements 1 & 2

    E-Print Network [OSTI]

    Page Number Step 1: Enter OASIS, Read Notices & Announcements 1 & 2 Step 2: Add Courses Selections (Ranking) 9 ­ 12 Final Suggestions & Log Out of OASIS 13 2012 ­ 2013 OASIS LOTTERY SELECTIONS LIST Enter OASIS, Read Notices & Announcements 1 1.1 Enter OASIS using the following URL: https://oasis

  1. Page Number Step 1: Enter OASIS, Read Notices & Announcements 1 & 2

    E-Print Network [OSTI]

    Page Number Step 1: Enter OASIS, Read Notices & Announcements 1 & 2 Step 2: Add Courses Selections (Ranking) 9 ­ 13 Final Suggestions & Log Out of OASIS 14 2014 ­ 2015 OASIS LOTTERY SELECTIONS LIST OASIS, Read Notices & Announcements 1 s 1.1 Enter OASIS us 1.2 Log into O 1.3 Click

  2. A review of "Reading History in Early Modern England." by D. R. Woolf

    E-Print Network [OSTI]

    Michael Mendle

    2004-01-01T23:59:59.000Z

    by Anthony Grafton and Lisa Jardine, William Sherman, Steven Zwicker, and Kevin Sharpe (whose Reading Revolutions was published too late for use here), though often to suggest that many readers read and absorbed their history on the fly. He begins with some...

  3. List of Suggested Papers Reading Assignment 1 (due January 22nd)

    E-Print Network [OSTI]

    Serban, Nicoleta

    . Journal of the American Statistical Association, Vol. 89, No. 426., pp. 391-400. Reading Assignment 4 (due of Neuroimaging Data", Journal of the American Statistical Association. 2. Kammann, E.E., Wand, M.P. (2003 Model for Rainfall", Journal of the American Statistical Association, 452, 1089- 1099. Reading

  4. English as a second language teachers' perceptions and use of classroom-based reading assessment.

    E-Print Network [OSTI]

    Jia, Yueming

    2006-04-12T23:59:59.000Z

    The purpose of this study was to explore ESL teachersÂ? perceptions and use of classroom-based reading assessments. The research questions underpinning this study were: 1) What types of classroom-based reading assessments are used in ESL classrooms...

  5. Review of Recent NGS Short Reads Alignment Tools BMI-231 final project, Chenxi Chen

    E-Print Network [OSTI]

    Bejerano, Gill

    on discussing the most commonly used aligners in recent 2-3 years. Bowtie and Bowtie2 Indexing reference genome can efficiently speed up finding candidate alignment location(s) for each read. Bowtie[1] uses] To make bowtie a suitable algorithm for mapping short reads, which have mismatches due to genetic variants

  6. Compressed Meter Reading for Delay-sensitive and Secure Load Report in Smart Grid

    E-Print Network [OSTI]

    Qiu, Robert Caiming

    of smart meters, which collects the current load of smart meters installed at each home and then forwards1 Compressed Meter Reading for Delay-sensitive and Secure Load Report in Smart Grid Husheng Li, Rukun Mao, Lifeng Lai and Robert. C. Qiu Abstract-- It is a key task in smart grid to send the readings

  7. Planar photovoltaic solar concentrator module

    DOE Patents [OSTI]

    Chiang, Clement J. (New Brunswick, NJ)

    1992-01-01T23:59:59.000Z

    A planar photovoltaic concentrator module for producing an electrical signal from incident solar radiation includes an electrically insulating housing having a front wall, an opposing back wall and a hollow interior. A solar cell having electrical terminals is positioned within the interior of the housing. A planar conductor is connected with a terminal of the solar cell of the same polarity. A lens forming the front wall of the housing is operable to direct solar radiation incident to the lens into the interior of the housing. A refractive optical element in contact with the solar cell and facing the lens receives the solar radiation directed into the interior of the housing by the lens and directs the solar radiation to the solar cell to cause the solar cell to generate an electrical signal. An electrically conductive planar member is positioned in the housing to rest on the housing back wall in supporting relation with the solar cell terminal of opposite polarity. The planar member is operable to dissipate heat radiated by the solar cell as the solar cell generates an electrical signal and further forms a solar cell conductor connected with the solar cell terminal to permit the electrical signal generated by the solar cell to be measured between the planar member and the conductor.

  8. Planar photovoltaic solar concentrator module

    DOE Patents [OSTI]

    Chiang, C.J.

    1992-12-01T23:59:59.000Z

    A planar photovoltaic concentrator module for producing an electrical signal from incident solar radiation includes an electrically insulating housing having a front wall, an opposing back wall and a hollow interior. A solar cell having electrical terminals is positioned within the interior of the housing. A planar conductor is connected with a terminal of the solar cell of the same polarity. A lens forming the front wall of the housing is operable to direct solar radiation incident to the lens into the interior of the housing. A refractive optical element in contact with the solar cell and facing the lens receives the solar radiation directed into the interior of the housing by the lens and directs the solar radiation to the solar cell to cause the solar cell to generate an electrical signal. An electrically conductive planar member is positioned in the housing to rest on the housing back wall in supporting relation with the solar cell terminal of opposite polarity. The planar member is operable to dissipate heat radiated by the solar cell as the solar cell generates an electrical signal and further forms a solar cell conductor connected with the solar cell terminal to permit the electrical signal generated by the solar cell to be measured between the planar member and the conductor. 5 figs.

  9. PSCAD Modules Representing PV Generator

    SciTech Connect (OSTI)

    Muljadi, E.; Singh, M.; Gevorgian, V.

    2013-08-01T23:59:59.000Z

    Photovoltaic power plants (PVPs) have been growing in size, and the installation time is very short. With the cost of photovoltaic (PV) panels dropping in recent years, it can be predicted that in the next 10 years the contribution of PVPs to the total number of renewable energy power plants will grow significantly. In this project, the National Renewable Energy Laboratory (NREL) developed a dynamic modeling of the modules to be used as building blocks to develop simulation models of single PV arrays, expanded to include Maximum Power Point Tracker (MPPT), expanded to include PV inverter, or expanded to cover an entire PVP. The focus of the investigation and complexity of the simulation determines the components that must be included in the simulation. The development of the PV inverter was covered in detail, including the control diagrams. Both the current-regulated voltage source inverter and the current-regulated current source inverter were developed in PSCAD. Various operations of the PV inverters were simulated under normal and abnormal conditions. Symmetrical and unsymmetrical faults were simulated, presented, and discussed. Both the three-phase analysis and the symmetrical component analysis were included to clarify the understanding of unsymmetrical faults. The dynamic model validation was based on the testing data provided by SCE. Testing was conducted at SCE with the focus on the grid interface behavior of the PV inverter under different faults and disturbances. The dynamic model validation covers both the symmetrical and unsymmetrical faults.

  10. The Relationship of Student Use of the Scholastic ReadAbout Software Systemon Texas Assessment of Knowledge and Skills (TAKS) Reading Test Scores as Reported in Student Records of Third and Fourth Grade Students at Comal Independent School District, Texas

    E-Print Network [OSTI]

    McGlothlin, Ross M.

    2010-01-14T23:59:59.000Z

    The purpose of this study was to examine the effect of Scholastic, Incorporated's ReadAbout software system on student achievement in the subject of reading. The study assessed the relationship between the amount of time third and fourth grade...

  11. Scannerless laser range imaging using loss modulation

    DOE Patents [OSTI]

    Sandusky, John V. (Albuquerque, NM)

    2011-08-09T23:59:59.000Z

    A scannerless 3-D imaging apparatus is disclosed which utilizes an amplitude modulated cw light source to illuminate a field of view containing a target of interest. Backscattered light from the target is passed through one or more loss modulators which are modulated at the same frequency as the light source, but with a phase delay .delta. which can be fixed or variable. The backscattered light is demodulated by the loss modulator and detected with a CCD, CMOS or focal plane array (FPA) detector to construct a 3-D image of the target. The scannerless 3-D imaging apparatus, which can operate in the eye-safe wavelength region 1.4-1.7 .mu.m and which can be constructed as a flash LADAR, has applications for vehicle collision avoidance, autonomous rendezvous and docking, robotic vision, industrial inspection and measurement, 3-D cameras, and facial recognition.

  12. WRAP Module 1 sampling and analysis plan

    SciTech Connect (OSTI)

    Mayancsik, B.A.

    1995-03-24T23:59:59.000Z

    This document provides the methodology to sample, screen, and analyze waste generated, processed, or otherwise the responsibility of the Waste Receiving and Processing Module 1 facility. This includes Low-Level Waste, Transuranic Waste, Mixed Waste, and Dangerous Waste.

  13. Laborlandschaft : redesigning the industrial laboratory module

    E-Print Network [OSTI]

    Farley, Alexander H. (Alexander Hamilton)

    2014-01-01T23:59:59.000Z

    This thesis proposes to redesign the industrial pharmaceutical laboratory typology by rethinking the composition of the laboratory module; the smallest functional sub-unit of the laboratory type. The design for this thesis ...

  14. Rack assembly for mounting solar modules

    DOE Patents [OSTI]

    Plaisted, Joshua Reed; West, Brian

    2012-09-04T23:59:59.000Z

    A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures to be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

  15. Rack assembly for mounting solar modules

    DOE Patents [OSTI]

    Plaisted, Joshua Reed (Oakland, CA); West, Brian (San Francisco, CA)

    2010-12-28T23:59:59.000Z

    A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures o be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

  16. PV Module Reliability Research (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-06-01T23:59:59.000Z

    This National Center for Photovoltaics sheet describes the capabilities of its PV module reliability research. The scope and core competencies and capabilities are discussed and recent publications are listed.

  17. Photovoltaic module with removable wind deflector

    DOE Patents [OSTI]

    Botkin, Jonathan (El Cerrito, CA); Graves, Simon (Berkeley, CA); Danning, Matt (Oakland, CA); Culligan, Matthew (Berkeley, CA)

    2012-08-07T23:59:59.000Z

    A photovoltaic (PV) module assembly including a PV module, a deflector, and a clip. The PV module includes a PV device and a frame. A PV laminate is assembled to the frame, and the frame includes a support arm forming a seat. The deflector defines a front face and a rear face, with the clip extending from either the trailing frame member or the rear face of the deflector. In a mounted state, the deflector is nested within the seat and is releasably mounted to the trailing frame member via the clip. In some embodiments, the support arm forms a second seat, with the PV module assembly providing a second mounted state in which the deflector is in a differing orientation/slope, nested within the second seat and releasably mounted to the trailing frame member via the clip.

  18. Photovoltaic module with removable wind deflector

    DOE Patents [OSTI]

    Botkin, Jonathan; Graves, Simon; Danning, Matt; Culligan, Matthew

    2014-02-18T23:59:59.000Z

    A photovoltaic (PV) module assembly including a PV module, a deflector, and a clip. The PV module includes a PV device and a frame. A PV laminate is assembled to the frame, and the frame includes a support arm forming a seat. The deflector defines a front face and a rear face, with the clip extending from either the trailing frame member or the rear face of the deflector. In a mounted state, the deflector is nested within the seat and is releasably mounted to the trailing frame member via the clip. In some embodiments, the support arm forms a second seat, with the PV module assembly providing a second mounted state in which the deflector is in a differing orientation/slope, nested within the second seat and releasably mounted to the trailing frame member via the clip.

  19. Photovoltaic module with removable wind deflector

    DOE Patents [OSTI]

    Botkin, Jonathan; Graves, Simon; Danning, Matt; Culligan, Matthew

    2013-05-28T23:59:59.000Z

    A photovoltaic (PV) module assembly including a PV module, a deflector, and a clip. The PV module includes a PV device and a frame. A PV laminate is assembled to the frame, and the frame includes a support arm forming a seat. The deflector defines a front face and a rear face, with the clip extending from either the trailing frame member or the rear face of the deflector. In a mounted state, the deflector is nested within the seat and is releasably mounted to the trailing frame member via the clip. In some embodiments, the support arm forms a second seat, with the PV module assembly providing a second mounted state in which the deflector is in a differing orientation/slope, nested within the second seat and releasably mounted to the trailing frame member via the clip.

  20. Process of making solar cell module

    DOE Patents [OSTI]

    Packer, M.; Coyle, P.J.

    1981-03-09T23:59:59.000Z

    A process is presented for the manufacture of solar cell modules. A solution comprising a highly plasticized polyvinyl butyral is applied to a solar cell array. The coated array is dried and sandwiched between at last two sheets of polyvinyl butyral and at least two sheets of a rigid transparent member. The sandwich is laminated by the application of heat and pressure to cause fusion and bonding of the solar cell array with the rigid transparent members to produce a solar cell module.

  1. Stacked vapor fed amtec modules

    DOE Patents [OSTI]

    Sievers, Robert K. (North Huntingdon, PA)

    1989-01-01T23:59:59.000Z

    The present invention pertains to a stacked AMTEC module. The invention includes a tubular member which has an interior. The member is comprised of a ion conductor that substantially conducts ions relative to electrons, preferably a beta"-alumina solid electrolyte, positioned about the interior. A porous electrode for conducting electrons and allowing sodium ions to pass therethrough, and wherein electrons and sodium ions recombine to form sodium is positioned about the beta"-alumina solid electrolyte. The electrode is operated at a temperature and a pressure that allows the recombined sodium to vaporize. Additionally, an outer current collector grid for distributing electrons throughout the porous electrode is positioned about and contacts the porous electrode. Also included in the invention is transporting means for transporting liquid sodium to the beta"-alumina solid electrolyte of the tubular member. A transition piece is positioned about the interior of the member and contacts the transporting means. The transition piece divides the member into a first cell and a second cell such that each first and second cell has a beta"-alumina solid electrolyte, a first and second porous electrode and a grid. The transition piece conducts electrons from the interior of the tubular member. There is supply means for supplying sodium to the transporting means. Preferably the supply means is a shell which surrounds the tubular member and is operated at a temperature such that the vaporized sodium condenses thereon. Returning means for returning the condensed sodium from the shell to the transporting means provides a continuous supply of liquid sodium to the transporting means. Also, there are first conducting means for conducting electric current from the transition piece which extends through the shell, and second conducting means for conducting electric current to the grid of the first cell which extends through the shell.

  2. The Influence of Orthographic Opacity on Reading Development among Nyanja-English Bilinguals in Zambia: A Cross-Linguistic Study

    E-Print Network [OSTI]

    Kaani, Bestern

    2014-12-15T23:59:59.000Z

    five basic (elementary) schools in Lusaka, Zambia. The ZAT consisted of five linguistically comparable measures of letter discrimination, phonological awareness, word reading, pseudoword decoding, and reading comprehension skills. Of the 240...

  3. Department of Basic Sciences Philadelphia University Module Syllabus

    E-Print Network [OSTI]

    Department of Basic Sciences ­ Philadelphia University Module Syllabus: Course Title: Computational

  4. Read: Literary Journey: A Rushdie-esque take on Nepali Travel Writing

    E-Print Network [OSTI]

    Fineprint Bookclub

    2007-01-01T23:59:59.000Z

    library-based mod- el.” It has three objectives: (a) education through libraries and literacy, (b) economic growth and (c) social development through community centres. It has helped estab- lished 39 community libraries in 35 districts across the country... on to read more. Later, during my college years in Calcutta, my af? nity for libraries and reading actually came to my aid in other ways too. I could go to the libraries to avoid the heat, and reading was also the most eco- nomical way of impressing people...

  5. AC PV Modules Take a standard DC PV module and connect a microinverter

    E-Print Network [OSTI]

    Johnson, Eric E.

    , and secure a listing to UL1741 for a pre-assembled module/inverter device, and you have an AC PV module No discussion of PV systems would be complete without a look at the newest inverter technologies that installers Most grid-tied inverters are "string inverters"--they operate with a string of series-connected PV

  6. Module Grounding Module grounding still continues to be an issue with many

    E-Print Network [OSTI]

    Johnson, Eric E.

    by leaps and bounds. New module and inverter manufacturers are entering the market, and the number of PV that will be used with transformerless inverters, and those systems will not have a grounded PV DC conductor. (See so, as PV installers attempt to reduce the time and materials required to ground modules

  7. Approved Module Information for EC305C, 2014/5 Module Title/Name: Contract Administration Module Code: EC305C

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    .; ordering procedures, payment procedures; budget procedures; resource management and planning; management and tutorial. Module Assessment Methods of Assessment & associated weighting (including approaches to formative assessment as well as summative): Assessment Type Category Duration/ Submission Date Common Modules/ Exempt

  8. Taming of Modulation Instability by Spatio-Temporal Modulation of the Potential

    E-Print Network [OSTI]

    Kumar, S; Botey, M; Staliunas, K

    2015-01-01T23:59:59.000Z

    Spontaneous pattern formation in a variety of spatially extended nonlinear system always occurs through a modulation instability: homogeneous state of the system becomes unstable with respect to growing modulation modes. Therefore, the manipulation of the modulation instability is of primary importance in controlling and manipulating the character of spatial patterns initiated by that instability. We show that the spatio-temporal periodic modulation of the potential of the spatially extended system results in a modification of its pattern forming instability. Depending on the modulation character the instability can be partially suppressed, can change its spectrum (for instance the long wave instability can transform into short wave instability), can split into two, or can be completely eliminated. The latter result is of especial practical interest, as can be used to stabilize the intrinsically unstable system. The result bears general character, as it is shown here on a universal model of Complex Ginzburg-L...

  9. Test of a single module of the J-PET scanner based on plastic scintillators

    E-Print Network [OSTI]

    P. Moskal; Sz. Nied?wiecki; T. Bednarski; E. Czerwi?ski; ?. Kap?on; E. Kubicz; I. Moskal; M. Pawlik-Nied?wiecka; N. G. Sharma; M. Silarski; M. Zieli?ski; N. Zo?; P. Bia?as; A. Gajos; A. Kochanowski; G. Korcyl; J. Kowal; P. Kowalski; T. Kozik; W. Krzemie?; M. Molenda; M. Pa?ka; L. Raczy?ski; Z. Rudy; P. Salabura; A. S?omski; J. Smyrski; A. Strzelecki; A. Wieczorek; W. Wi?licki

    2014-08-29T23:59:59.000Z

    Time of Flight Positron Emission Tomography scanner based on plastic scintillators is being developed at the Jagiellonian University by the J-PET collaboration. The main challenge of the conducted research lies in the elaboration of a method allowing application of plastic scintillators for the detection of low energy gamma quanta. In this article we report on tests of a single detection module built out from BC-420 plastic scintillator strip (with dimensions of 5x19x300mm^3) read out at two ends by Hamamatsu R5320 photomultipliers. The measurements were performed using collimated beam of annihilation quanta from the 68Ge isotope and applying the Serial Data Analyzer (Lecroy SDA6000A) which enabled sampling of signals with 50ps intervals. The time resolution of the prototype module was established to be better than 80ps (sigma) for a single level discrimination. The spatial resolution of the determination of the hit position along the strip was determined to be about 0.93cm (sigma) for the annihilation quanta. The fractional energy resolution for the energy E deposited by the annihilation quanta via the Compton scattering amounts to sigma(E)/E = 0.044/sqrt(E[MeV]) and corresponds to the sigma(E)/E of 7.5% at the Compton edge.

  10. Model documentation renewable fuels module of the National Energy Modeling System

    SciTech Connect (OSTI)

    NONE

    1995-06-01T23:59:59.000Z

    This report documents the objectives, analytical approach, and design of the National Energy Modeling System (NEMS) Renewable Fuels Module (RFM) as it relates to the production of the 1995 Annual Energy Outlook (AEO95) forecasts. The report catalogues and describes modeling assumptions, computational methodologies, data inputs, and parameter estimation techniques. A number of offline analyses used in lieu of RFM modeling components are also described. The RFM consists of six analytical submodules that represent each of the major renewable energy resources--wood, municipal solid waste (MSW), solar energy, wind energy, geothermal energy, and alcohol fuels. The RFM also reads in hydroelectric facility capacities and capacity factors from a data file for use by the NEMS Electricity Market Module (EMM). The purpose of the RFM is to define the technological, cost and resource size characteristics of renewable energy technologies. These characteristics are used to compute a levelized cost to be competed against other similarly derived costs from other energy sources and technologies. The competition of these energy sources over the NEMS time horizon determines the market penetration of these renewable energy technologies. The characteristics include available energy capacity, capital costs, fixed operating costs, variable operating costs, capacity factor, heat rate, construction lead time, and fuel product price.

  11. Single, stretched membrane, structural module experiments

    SciTech Connect (OSTI)

    Wood, R.L.

    1986-02-01T23:59:59.000Z

    This report describes tests done on stretched-membrane heliostats used to reflect solar radiation onto a central receiver. The tests were used to validate prior analysis and mathematical models developed to describe module performance. The modules tested were three meters in diameter and had reflective polymer film laminated to the membrane. The frames were supported at three points equally spaced around the ring. Three modules were pneumatically attached with their weight suspended at the bottom support, two were pneumatically attached with their weight suspended from the upper mounts, and one was rigidly attached with its weight suspended at the bottom mount. By varying the membrane tension we could simulate a uniform wind loading normal to the mirror's surface. A video camera 15+ meters away from the mirror recorded the virtual image of a target grid as reflected by the mirrors' surface. The image was digitized and stored on a microcomputer. Using the law of reflection and analytic geometry, we computed the surface slopes of a sampling of points on the surface. The dominant module response was consistent with prior SERI analyses. The simple analytical model is quite adequate for designing and sizing single-membrane modules if the initial imperfections and their amplification are appropriately controlled. To avoid potential problems resulting from the fundamentally n = 2 deformation phenomena, we advise using either relatively stiffer ring frames or more than three support points.

  12. Approved Module Information for EE2AEL, 2014/5 Module Title/Name: Analogue Electronics Module Code: EE2AEL

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    ) Programmes in which available: BEng Electrical and Electronic Engineering. MEng Electrical and Electronic Engineering. BEng Electronic Engineering and Computer Science. MEng Electronic Engineering and ComputerApproved Module Information for EE2AEL, 2014/5 Module Title/Name: Analogue Electronics Module Code

  13. Approved Module Information for CS2090, 2014/5 Module Title/Name: Software Lifecycle and Design Module Code: CS2090

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    orally and in writing Indicative Module Content: Software lifecycle overview Software development modelsApproved Module Information for CS2090, 2014/5 Module Title/Name: Software Lifecycle and Design of the software lifecycle with particular emphasis on software design and design realisation. By the end

  14. Approved Module Information for EE4PSY, 2014/5 Module Title/Name: Power Systems 6 Module Code: EE4PSY

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for EE4PSY, 2014/5 Module Title/Name: Power Systems 6 Module Code: EE4 will be able to: * Understand how a power system operates normally * Understand how to model a three phase power system in pu * Perform a simple load flow calculation to determine the currents in a system

  15. Approved Module Information for EE3PSY, 2014/5 Module Title/Name: Power Systems 6 Module Code: EE3PSY

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for EE3PSY, 2014/5 Module Title/Name: Power Systems 6 Module Code: EE3 the student will be able to: * Understand how a power system operates normally - Understand how to model a three phase power system in pu - Perform a simple load flow calculation to determine the currents

  16. Conflict Management and Dispute Resolution Services May 2011 Read More about Conflict Management

    E-Print Network [OSTI]

    Yang, Zong-Liang

    . Dana, Daniel., Managing Differences: How to Build Better Relationships at Work and Home. (MConflict Management and Dispute Resolution Services May 2011 Read More about Conflict Management Management o Bullying Conflict and Culture Influence Mediation Negotiation Facilitation and Group Problem

  17. Saccadic suppression during reading activity : is the spill-over effect weaker after a longer saccade? 

    E-Print Network [OSTI]

    Yatabe, Kiyomi

    2006-01-01T23:59:59.000Z

    Although it has generally thought that the duration of saccades should be subtracted from the reading time in eye movement research, Irwin (1998) has demonstrated that lexical processing such as word recognition is not ...

  18. How Does the Brain Learn to Read? Guest Lecture by James R. Booth

    E-Print Network [OSTI]

    Loudon, Catherine

    How Does the Brain Learn to Read? Guest Lecture by James R that general principles of brain development are key to reaching a deeper understanding) the specialization of brain regions for different computations and (2) the interaction between

  19. Reading profiles for adults with low-literacy: Cluster analysis with power and speeded measures

    E-Print Network [OSTI]

    Mellard, Daryl; Fall, Emily C.; Mark, Caroline Ann

    2009-01-01T23:59:59.000Z

    The United States’ National Institute for Literacy’s (NIFL) review of adult literacy instruction research recommended adult education (AE) programs assess underlying reading abilities in order to plan appropriate instruction ...

  20. Kindergarten Family Reading Institute: Empowering Parents Through a Sustained Home and School Partnership

    E-Print Network [OSTI]

    Ulloa, Carlos

    2013-01-01T23:59:59.000Z

    S. , & Shaywitz, B. (1999). Dyslexia. In K. Swaiman and S.learners and students with dyslexia. In S. J. Samuels & A.reading disability (dyslexia). In M. Kamil, P. Mosenthal, P.

  1. "Reading Between the Brides": Lucrezia Vizzana's Componimenti musicali in Textual and Musical Context

    E-Print Network [OSTI]

    Mitchell, Katrina

    2011-12-31T23:59:59.000Z

    ABSTRACT “Reading Between the Brides”: Lucrezia Vizzana's Componimenti musicali in Textual and Musical Context There had never been a Bolognese nun known to have published her music when Lucrezia Vizzana's Componimenti ...

  2. Centrifugal and centripetal forces in the discourse of early years reading instruction 

    E-Print Network [OSTI]

    Hunt, Christopher George

    2010-11-25T23:59:59.000Z

    This thesis reports on a research project investigating how a sample of eight teachers of P2 children in Scotland encouraged dialogic interaction in their reading groups while following prescriptive policy. The research ...

  3. The particpation and performance of students with emotional disturbance on state accountability assessment in reading

    E-Print Network [OSTI]

    Carr George, Catherine Elizabeth

    2009-05-15T23:59:59.000Z

    This study examined the participation rates and performance results of students with emotional disturbance (ED) in a statewide reading assessment. Public school districts in Texas use the Texas Assessment of Knowledge and Skills (TAKS) test...

  4. Rapid Evolutionary Placement of Short Sequence Reads (2010 JGI/ANL HPC Workshop)

    ScienceCinema (OSTI)

    Stamatakis, Alexis [Technical University of Munich

    2011-06-08T23:59:59.000Z

    Alexis Stamatakis of the Technical University of Munich gives a presentation on "Rapid Evolutionary Placement of Short Sequence Reads" at the JGI/Argonne HPC Workshop on January 26, 2010.

  5. EMIRGE: Reconstruction of full length ribosomal genes from microbial community short read sequencing data

    E-Print Network [OSTI]

    Miller, Christopher S; Baker, Brett J; Thomas, Brian C; Singer, Steven W; Banfield, Jillian F

    2011-01-01T23:59:59.000Z

    used the short read mapper bowtie [19] in paired-end mode.For initiation, bowtie reported a single best alignment,For subsequent iterations, bowtie used the same parameters,

  6. Parallel Assembly of Large Genomes from Paired Short Reads (2010 JGI/ANL HPC Workshop)

    ScienceCinema (OSTI)

    Aluru, Srinivas [Iowa State University

    2011-06-08T23:59:59.000Z

    Srinivas Aluru from Iowa State University gives a presentation on "Parallel Assembly of Large Genomes from Paired Short Reads" at the JGI/Argonne HPC Workshop on January 25, 2010.

  7. Efficient Short-Read Assembly of Eukaryotic Genomes (2010 JGI/ANL HPC Workshop)

    ScienceCinema (OSTI)

    Chapman, Jarrod

    2011-06-03T23:59:59.000Z

    Jarrod Chapman of the DOE JGI gives a presentation on "Efficient Short-Read Assembly of Eukaryotic Genomes" at the JGI/Argonne HPC Workshop on January 25, 2010.

  8. RFID tag modification for full depth backscatter modulation

    DOE Patents [OSTI]

    Scott, Jeffrey Wayne [Pasco, WA; Pratt, Richard M [Richland, WA

    2010-07-20T23:59:59.000Z

    A modulated backscatter radio frequency identification device includes a diode detector configured to selectively modulate a reply signal onto an incoming continuous wave; communications circuitry configured to provide a modulation control signal to the diode detector, the diode detector being configured to modulate the reply signal in response to be modulation control signal; and circuitry configured to increase impedance change at the diode detector which would otherwise not occur because the diode detector rectifies the incoming continuous wave while modulating the reply signal, whereby reducing the rectified signal increases modulation depth by removing the reverse bias effects on impedance changes. Methods of improving depth of modulation in a modulated backscatter radio frequency identification device are also provided.

  9. Low thermal resistance power module assembly

    DOE Patents [OSTI]

    Hassani, Vahab (Denver, CO); Vlahinos, Andreas (Castle Rock, CO); Bharathan, Desikan (Arvada, CO)

    2007-03-13T23:59:59.000Z

    A power module assembly with low thermal resistance and enhanced heat dissipation to a cooling medium. The assembly includes a heat sink or spreader plate with passageways or openings for coolant that extend through the plate from a lower surface to an upper surface. A circuit substrate is provided and positioned on the spreader plate to cover the coolant passageways. The circuit substrate includes a bonding layer configured to extend about the periphery of each of the coolant passageways and is made up of a substantially nonporous material. The bonding layer may be solder material which bonds to the upper surface of the plate to provide a continuous seal around the upper edge of each opening in the plate. The assembly includes power modules mounted on the circuit substrate on a surface opposite the bonding layer. The power modules are positioned over or proximal to the coolant passageways.

  10. ILC Marx Modulator Development Program Status

    SciTech Connect (OSTI)

    Burkhart, C.; Beukers, T.; Larsen, R.; Macken, K.; Nguyen, M.; Olsen, J.; Tang, T.; /SLAC

    2009-03-04T23:59:59.000Z

    Development of a first generation prototype (P1) Marx-topology klystron modulator for the International Linear Collider is nearing completion at the Stanford Linear Accelerator Center. It is envisioned as a smaller, lower cost, and higher reliability alternative to the present, bouncer-topology, 'Baseline Conceptual Design'. The Marx presents several advantages over conventional klystron modulator designs. It is physically smaller; there is no pulse transformer (quite massive at ILC parameters) and the energy storage capacitor bank is quite small, owing to the active droop compensation. It is oil-free; voltage hold-off is achieved using air insulation. It is air cooled; the secondary air-water heat exchanger is physically isolated from the electronic components. The P1-Marx employs all solid state elements; IGBTs and diodes, to control the charge, discharge and isolation of the cells. A general overview of the modulator design and the program status are presented.

  11. Enhanced heat transfer for thermionic power modules

    SciTech Connect (OSTI)

    Johnson, D.C.

    1981-07-01T23:59:59.000Z

    The thermionic power module is capable of operating at very high heat fluxes, which in turn serve to reduce capital costs. The most efficient operation also requires uniform heat fluxes. The development of enhanced heat transfer systems is required to meet the demand for high heat fluxes (>20 w/cm/sup 2/) at high temperatures (>1500K) which advanced thermionic power modules place upon combustion systems. Energy transfer from the hot combustion gases may take place by convection, radiation, or a combination of radiation and convection. Enhanced convective heat transfer with a jet impingement system has been demonstrated in a thermionic converter. The recently-developed cellular ceramic radiative heat transfer system has also been applied to a thermionic converter. By comparing the jet impingement and cellular ceramic radiative heat transfer systems, an appropriate system may be selected for utilization in advanced thermionic power modules. Results are reported.

  12. Control of Moisture Ingress into Photovoltaic Modules

    SciTech Connect (OSTI)

    Kempe, M. D.

    2005-02-01T23:59:59.000Z

    During long-term exposure of photovoltaic modules to environmental stress, the ingress of water into the module is correlated with decreased performance. By using diffusivity measurements for water through encapsulants such as ethylene vinyl acetate (EVA), we have modeled moisture ingress using a finite-element analysis with atmospheric data from various locations such as Miami, Florida. This analysis shows that because of the high diffusivity of EVA, even an impermeable glass back-sheet alone is incapable of preventing significant moisture ingress from the edges for a 20-year lifecycle. This result has led us to investigate ways to protect modules from moisture through the use of different encapsulating chemistries and materials.

  13. Siemens SOFC Test Article and Module Design

    SciTech Connect (OSTI)

    None

    2011-03-31T23:59:59.000Z

    Preliminary design studies of the 95 kWe-class SOFC test article continue resulting in a stack architecture of that is 1/3 of 250 kWe-class SOFC advanced module. The 95 kWeclass test article is envisioned to house 20 bundles (eight cells per bundle) of Delta8 cells with an active length of 100 cm. Significant progress was made in the conceptual design of the internal recirculation loop. Flow analyses were initiated in order to optimize the bundle row length for the 250 kWeclass advanced module. A preferred stack configuration based on acceptable flow and thermal distributions was identified. Potential module design and analysis issues associated with pressurized operation were identified.

  14. Module level solutions to solar cell polarization

    DOE Patents [OSTI]

    Xavier, Grace (Fremont, CA), Li; Bo (San Jose, CA)

    2012-05-29T23:59:59.000Z

    A solar cell module includes interconnected solar cells, a transparent cover over the front sides of the solar cells, and a backsheet on the backsides of the solar cells. The solar cell module includes an electrical insulator between the transparent cover and the front sides of the solar cells. An encapsulant protectively packages the solar cells. To prevent polarization, the insulator has resistance suitable to prevent charge from leaking from the front sides of the solar cells to other portions of the solar cell module by way of the transparent cover. The insulator may be attached (e.g., by coating) directly on an underside of the transparent cover or be a separate layer formed between layers of the encapsulant. The solar cells may be back junction solar cells.

  15. Development of Fuel Shuffling Module for PHISICS

    SciTech Connect (OSTI)

    Allan Mabe; Andrea Alfonsi; Cristian Rabiti; Aaron Epiney; Michael Lineberry

    2013-06-01T23:59:59.000Z

    PHISICS (Parallel and Highly Innovative Simulation for the INL Code System) [4] code toolkit has been in development at the Idaho National Laboratory. This package is intended to provide a modern analysis tool for reactor physics investigation. It is designed with the mindset to maximize accuracy for a given availability of computational resources and to give state of the art tools to the modern nuclear engineer. This is obtained by implementing several different algorithms and meshing approaches among which the user will be able to choose, in order to optimize his computational resources and accuracy needs. The software is completely modular in order to simplify the independent development of modules by different teams and future maintenance. The package is coupled with the thermo-hydraulic code RELAP5-3D [3]. In the following the structure of the different PHISICS modules is briefly recalled, focusing on the new shuffling module (SHUFFLE), object of this paper.

  16. Plasmon absorption modulator systems and methods

    SciTech Connect (OSTI)

    Kekatpure, Rohan Deodatta; Davids, Paul

    2014-07-15T23:59:59.000Z

    Plasmon absorption modulator systems and methods are disclosed. A plasmon absorption modulator system includes a semiconductor substrate, a plurality of quantum well layers stacked on a top surface of the semiconductor substrate, and a metal layer formed on a top surface of the stack of quantum well layers. A method for modulating plasmonic current includes enabling propagation of the plasmonic current along a metal layer, and applying a voltage across the stack of quantum well layers to cause absorption of a portion of energy of the plasmonic current by the stack of quantum well layers. A metamaterial switching system includes a semiconductor substrate, a plurality of quantum well layers stacked on a top surface of the semiconductor substrate, and at least one metamaterial structure formed on a top surface of the stack of quantum well layers.

  17. Melatonin modulates intercellular communication among immortalized rat suprachiasmatic nucleus cells

    E-Print Network [OSTI]

    Cox, Kimberly Yvonne

    2009-05-15T23:59:59.000Z

    , the influence of melatonin on calcium waves was studied in the presence of endogenously accumulated or exogenously supplemented ATP. 12 CHAPTER II MATERIALS AND METHODS Cell culture Cultures of SCN2.2 cells were grown on laminin-coated culture dishes (60... to cross gap junctions when introduced intracellularly. The dye solution was supplemented with melatonin or CBX as appropriate. Confluent cells on glass-bottom dishes were then damaged with a fresh, sterile scalpel blade or a pulled glass pipette tip...

  18. License Structure for Multi-Module Facilities

    SciTech Connect (OSTI)

    Thomas Hicks

    2010-08-01T23:59:59.000Z

    The Next Generation Nuclear Plant (NGNP) Project is intended to be the prototype for multi-module commercial high temperature gas reactors (HTGRs) for process heat and/or electricity generation. Part of the objectives of the project are to establish the conditions that would govern or enhance the design, licensing, construction and operation of numerous, modular nuclear plants, particularly suited for industrial applications or that could reduce the risk of such projects. A determination is desired regarding whether a multi-module reactor plant can be licensed with a single Nuclear Regulatory Commission (NRC) review, hearing, and safety evaluation report. If it is determined that a multi-modular reactor plant can be licensed under a single review/hearing process, the structure and the duration of the license for each module will also need to be determined. The purpose of this paper is to describe for the NRC the NGNP position on these two issues and obtain either NRC general concurrence or comments on the approach to these issues. While the current NGNP planning provides for only a single reactor module, the project is intended to provide the basis and establish a licensing framework that can be used by future commercial HTGRs and other reactor designs, including a variety of small modular reactor technologies, with configurations reflecting design standardization of multi-module plants. Therefore, it is important to identify a path for addressing these modular reactor plant issues so that the resolution can be factored into the NGNP Project planning. The NGNP position is that a single combined license (COL) application can be submitted for a multi-modular reactor facility, the COL application can undergo a single NRC review/hearing process, and each module should be issued a separate license.

  19. Imagery, affect, and the embodied mind: implications for reading and responding to literature

    E-Print Network [OSTI]

    Krasny, Karen A.

    2006-04-12T23:59:59.000Z

    IMAGERY, AFFECT, AND THE EMBODIED MIND: IMPLICATIONS FOR READING AND RESPONDING TO LITERATURE A Dissertation by KAREN A. KRASNY Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment... of the requirements for the degree of DOCTOR OF PHILOSOPHY December 2004 Major Subject: Curriculum & Instruction IMAGERY, AFFECT, AND THE EMBODIED MIND: IMPLICATIONS FOR READING AND RESPONDING TO LITERATURE A Dissertation by KAREN A. KRASNY...

  20. Request for Information on Photovoltaic Module Recycling

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy SunShot Initiative requests feedback from industry, academia, research laboratories, government agencies, and other stakeholders on issues related to photovoltaic (PV) module recycling technology. SunShot intends to understand the current state of recycling technology and the areas of research that could lead to impactful recycling technologies to support the developing PV industry. The intent of this request for information is to generate discussion related to planning for the end of life of photovoltaic modules and to create a list of high impact research topics in photovoltaics recycling.

  1. Ponderomotive Forces On Waves In Modulated Media

    SciTech Connect (OSTI)

    Dodin, I.Y; Fisch, Nathaniel

    2014-02-28T23:59:59.000Z

    Nonlinear interactions of waves via instantaneous cross-phase modulation can be cast in the same way as ponderomotive wave-particle interactions in high-frequency electromagnetic fi eld. The ponderomotive effect arises when rays of a probe wave scatter off perturbations of the underlying medium produced by a second, modulation wave, much like charged particles scatter off a quasiperiodic field. Parallels with the point-particle dynamics, which itself is generalized by this theory, lead to new methods of wave manipulation, including asymmetric barriers for light.

  2. Reliable and redundant FPGA based read-out design in the ATLAS TileCal Demonstrator

    E-Print Network [OSTI]

    Henrik Åkerstedt; Steffen Muschter; Gary Drake; Kelby Anderson; Christian Bohm; Mark Oreglia; Fukun Tang

    2014-06-23T23:59:59.000Z

    The Tile Calorimeter at ATLAS is a hadron calorimeter based on steel plates and scintillating tiles read out by PMTs. The current read-out system uses standard ADCs and custom ASICs to digitize and temporarily store the data on the detector. However, only a subset of the data is actually read out to the counting room. The on-detector electronics will be replaced around 2023. To achieve the required reliability the upgraded system will be highly redundant. Here the ASICs will be replaced with Kintex-7 FPGAs from Xilinx. This, in addition to the use of multiple 10 Gbps optical read-out links, will allow a full read-out of all detector data. Due to the higher radiation levels expected when the beam luminosity is increased, opportunities for repairs will be less frequent. The circuitry and firmware must therefore be designed for sufficiently high reliability using redundancy and radiation tolerant components. Within a year, a hybrid demonstrator including the new read-out system will be installed in one slice of the ATLAS Tile Calorimeter. This will allow the proposed upgrade to be thoroughly evaluated well before the planned 2023 deployment in all slices, especially with regard to long term reliability. Different firmware strategies alongside with their integration in the demonstrator are presented in the context of high reliability protection against hardware malfunction and radiation induced errors.

  3. Approved Module Information for ME2011, 2014/5 Module Title/Name: Thermodynamics and Fluids Module Code: ME2011

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    to demonstrate real life problem solving Development of an understanding of: 1. basic thermodynamic principles-fluid principles to a wide range of engineering and design problems. Indicative Module Content: Applications of temperature d) Vapour Power Cycles e) Gas Power Cycles f) Gas compressors g) Refrigerators and Heat Pumps Pipe

  4. Approved Module Information for LT3101, 2014/5 Module Title/Name: Inbound Logistics Module Code: LT3101

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Presentation skills, study skills, time and resource management skills, independent learning skills. Indicative lectures and directed self-study. Module Assessment Methods of Assessment & associated weighting (including approaches to formative assessment as well as summative): Assessment Type Category Duration/ Submission Date

  5. Approved Module Information for CE3105, 2014/5 Module Title/Name: Advanced Separation Processes Module Code: CE3105

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    distillation, drying and solvent extraction theory to various design problems * The ability to select * Design work #12;* Problem solving skills Indicative Module Content: Advanced Distillation * Short and flooding; column sizing for percent flood design and low pressure drop design; height of packing equivalent

  6. Approved Module Information for CS3360, 2014/5 Module Title/Name: Software Project Management Module Code: CS3360

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    ; quality control, assurance and management systems; quality models and metrics NOTE: The pre planning, scheduling and resourcing, and to requirements, risk and quality management, the module lays for information systems, including tactical and strategic aspects, and the management of requirements, risks

  7. Approved Module Information for CE2004, 2014/5 Module Title/Name: Transfer Processes Module Code: CE2004

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    * Fundamental processes of mass transfer * Design principles of heat exchangers * Fundamentals of radiant heat * a knowledge of the fundamentals and practical applications of radiative heat transfer * a knowledge of pipe solving * Study skills * Time management Indicative Module Content: Heat Transfer (Dr. John Brammer) Heat

  8. Approved Module Information for BS3355, 2014/5 Module Title/Name: Innovation Module Code: BS3355

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    significance. The module structure is as follows: Term 1: Week 1 Setting the Scene 1: What is Innovation? Week 2 Setting the Scene 2: Innovation and Industry Dynamics Week 3 Tutorial 1 Week 4 Innovation Process 1: From Closed Innovation to Open Innovation Week 5 Tutorial 2 Week 6 Innovation Process 2: Role

  9. Approved Module Information for BM3309, 2014/5 Module Title/Name: International Marketing Module Code: BM3309

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    .ac.uk Telephone Number X3466 Office Not Specified Additional Module Tutor(s): Elaine Clarke. Level Description. This will be formatively assessed through group work during tutorials. - Describe and discuss the key issues required work during tutorials and the final examination. - Evaluate the impact of recent environmental changes

  10. Approved Module Information for CS2020, 2014/5 Module Title/Name: Software Engineering Module Code: CS2020

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    system in software development. Indicative Module Content: * The Software Development Life Cycle. * Understand different approaches to, and the key stages of, the software development life cycle. * Develop the core characteristics and main phases of various software development life cycles. * Interpret UML

  11. Approved Module Information for ME4504, 2014/5 Module Title/Name: Renewable Energy Module Code: ME4504

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    energy services. Focussing on solar, wind and wave energy, it offers the student a theoretical basis of solar energy conversion:idealised cycles Solar thermal energy conversion: types of collector, collector turbine Renewable energy system design Renewable Energy Policy: UK and international perspectives Module

  12. Please read this guide before operating this equipment. After you finish reading this guide, store it in a safe place for future reference. ENG

    E-Print Network [OSTI]

    Pasternack, Gregory B.

    the Machine Menu Functions and Operation Printer Settings Menu Functions and Operation Report Settings Menu the Manuals for the Machine The manuals for this machine are divided as follow. Please read them to suit yourRUNNER 3300/2800/2200 Series machine, and how to specify these functions from the touch panel display. Please

  13. Heat Shock Response Modulators as Therapeutic

    E-Print Network [OSTI]

    Morimoto, Richard

    Heat Shock Response Modulators as Therapeutic Tools for Diseases of Protein Conformation* Published. This review addresses the regulation of molecular chaperones and components of protein homeostasis by heat understanding of pharmacologically active small molecule regu- lators of the heat shock response

  14. Optomechanical laser cooling with mechanical modulations

    E-Print Network [OSTI]

    Marc Bienert; Pablo Barberis-Blostein

    2014-12-15T23:59:59.000Z

    We theoretically study the laser cooling of cavity optomechanics when the mechanical resonance frequency and damping depend on time. In the regime of weak optomechanical coupling we extend the theory of laser cooling using an adiabatic approximation. We discuss the modifications of the cooling dynamics and compare it with numerical simulations in a wide range of modulation frequencies.

  15. Name of Module: Compiler Construction I

    E-Print Network [OSTI]

    Wichmann, Felix

    Responsible for Module: Peter Pepper, Sabine Glesner Secretariat: TEL 12-2, TEL 12-4 e-mail address: sekr tools and are able to implement a simple compiler. 2. Content The course thoroughly covers the following and practical tutorials including practical work on computers. The tutorials are held in small groups. Within

  16. Analysis of modulation scheme using GNU Radio

    E-Print Network [OSTI]

    Yu, Chansu

    1 Analysis of modulation scheme using GNU Radio By: Zeyu long Outline Introduce Project Goal QPSK CPFSK Resolute Project conclusion Project challenges Reference #12;2 Introduce (1) GNU radio: One of the most popular applications of Software Defined Radios Use C++ to write blocks Use python to connect

  17. Module name: Interactive computer graphics Abbreviation: ICG

    E-Print Network [OSTI]

    Ahlers, Volker - Fakultät IV

    Module name: Interactive computer graphics Abbreviation: ICG Study semester: 2 nd semester (SS majoring in "Graphics and Visualization" Teaching methods/SWS: 2 SWS lecture with approx. 15 students 2 SWS: Computer Vision, cryptography and algorithms, computer graphics lecture in Bachelor study program Learning

  18. Research Report Attentional Modulation of Visual

    E-Print Network [OSTI]

    Nottingham, University of

    Research Report Attentional Modulation of Visual Processing in Adult Dyslexia A Spatial play a causal role in dyslexia. How- ever, traditional methods for investigating this assertion have that this spatial-cuing deficit is not merely a sec- ondary consequence of magnocellular dysfunction. Dyslexia

  19. Nutrient Management Module No. 15 Sustainable

    E-Print Network [OSTI]

    Lawrence, Rick L.

    Nutrient Management Module No. 15 Sustainable Agriculture by Ann McCauley, Soil Scientist, Clain CCA Nutrient Management Competency Areas I and VI: Basic Concepts of Soil Fertility, and Nutrient- tural management technologies to produce quality food and fiber while maintaining or increasing soil

  20. Titanium Target Module V.B. Graves

    E-Print Network [OSTI]

    McDonald, Kirk

    , reducer also Titanium #12;7 OAK RIDGE NATIONAL LABORATORY U. S. DEPARTMENT OF ENERGY MERIT VRVS Mtg 1 FebTitanium Target Module Changes V.B. Graves P.T. Spampinato T.A. Gabriel MERIT VRVS Meeting February 1, 2006 #12;2 OAK RIDGE NATIONAL LABORATORY U. S. DEPARTMENT OF ENERGY MERIT VRVS Mtg 1 Feb 2006

  1. FACULTY OF ENGINEERING MODULE DESCRIPTION FORM

    E-Print Network [OSTI]

    Mottram, Nigel

    Engineering and coastal processes 2. Wave Kinematics; linear wave theory 3. Wave Dynamics; wave transformation: 5 Prerequisites: Water Engineering 2 Module Format and Delivery (hours): Lecture Tutorial in coastal management. Ability to use data sources to assess wave conditions, estimate tidal streams

  2. Sigma delta modulation of a chaotic signal 

    E-Print Network [OSTI]

    Ushaw, Gary

    Sigma delta modulation SDM has become a widespread method of analogue to digital conversion, however its operation has not been completely defined. The majority of the analysis carried out on the circuit has been from a linear standpoint, with non-linear...

  3. Module Technology: Current Practice and Issues (Presentation)

    SciTech Connect (OSTI)

    Wohlgemuth, J.

    2010-10-05T23:59:59.000Z

    PV modules must provide mechanical support for the cells, protect the world from the voltages inside, protect the cells, diodes and interconnects from the weather outside, couple as much light as possible into the PV cells and minimize the temperature increase of the cells. The package must continue to serve these functions for at least 25 years as that is the typical module warranty period today. Furthermore the package must do all this for as low a cost as possible since the key to large scale PV growth is a reduction in cost while retaining excellent module reliability and durability. This paper will review current module construction practices for both crystalline silicon and thin film PV with emphasis on explaining why the present designs and materials have been selected. Possible long term issues with today's designs and materials will be discussed. Several proposed solutions to these issues will be presented, highlighting the research efforts that will be necessary in order to verify that they can cost effectively solve the identified issues.

  4. Energy spectrum control for modulated proton beams

    SciTech Connect (OSTI)

    Hsi, Wen C.; Moyers, Michael F.; Nichiporov, Dmitri; Anferov, Vladimir; Wolanski, Mark; Allgower, Chris E.; Farr, Jonathan B.; Mascia, Anthony E.; Schreuder, Andries N. [Midwest Proton Radiotherapy Institute, Bloomington, Indiana 47408 and University Florida Proton Therapy Institute, Jacksonville, Florida 32206 (United States); Proton Therapy, Inc., Colton, California 92324 (United States); Indiana University Cyclotron Facility, Bloomington, Indiana 47408 (United States); Midwest Proton Radiotherapy Institute, Bloomington, Indiana 47408 and University Florida Proton Therapy Institute, Jacksonville, Florida 32206 (United States); Midwest Proton Radiotherapy Institute, Bloomington, Indiana 47408 (United States); University Florida Proton Therapy Institute, Jacksonville, Florida 32206 (United States) and Westdeutsches Protonentherapiezentrum, Universitaetsklinikum, Hufelandstrasse 55, 45147 Essen (Germany); Midwest Proton Radiotherapy Institute, Bloomington, Indiana 47408 (United States); University Florida Proton Therapy Institute, Jacksonville, Florida 32206 (United States) and ProCure Treatment Centers, Inc., Bloomington, Indiana 47404 (United States)

    2009-06-15T23:59:59.000Z

    In proton therapy delivered with range modulated beams, the energy spectrum of protons entering the delivery nozzle can affect the dose uniformity within the target region and the dose gradient around its periphery. For a cyclotron with a fixed extraction energy, a rangeshifter is used to change the energy but this produces increasing energy spreads for decreasing energies. This study investigated the magnitude of the effects of different energy spreads on dose uniformity and distal edge dose gradient and determined the limits for controlling the incident spectrum. A multilayer Faraday cup (MLFC) was calibrated against depth dose curves measured in water for nonmodulated beams with various incident spectra. Depth dose curves were measured in a water phantom and in a multilayer ionization chamber detector for modulated beams using different incident energy spreads. Some nozzle entrance energy spectra can produce unacceptable dose nonuniformities of up to {+-}21% over the modulated region. For modulated beams and small beam ranges, the width of the distal penumbra can vary by a factor of 2.5. When the energy spread was controlled within the defined limits, the dose nonuniformity was less than {+-}3%. To facilitate understanding of the results, the data were compared to the measured and Monte Carlo calculated data from a variable extraction energy synchrotron which has a narrow spectrum for all energies. Dose uniformity is only maintained within prescription limits when the energy spread is controlled. At low energies, a large spread can be beneficial for extending the energy range at which a single range modulator device can be used. An MLFC can be used as part of a feedback to provide specified energy spreads for different energies.

  5. Module No: 420252The Jordanian ConstitutionModule Title: Co-requisite:Political Systems and

    E-Print Network [OSTI]

    -mailOffice Number Office Phone Academic rank Instructor Name E-mailOffice Number Office Phone Academic rank Module, not to mention the basic general liberties 3. develop students skills in writing and preparing articles, reports

  6. Module 5: Fuel Cell Systems | Department of Energy

    Energy Savers [EERE]

    Module 5: Fuel Cell Systems Module 5: Fuel Cell Systems This course covers the systems required to operate a fuel cell engine, the components and functionality of each fuel cell...

  7. Electro-optical Modulation in Graphene Integrated Photonic Crystal Nanocavities

    E-Print Network [OSTI]

    Gan, Xuetao

    We demonstrate high-contrast electro-optic modulation in a graphene integrated photonic crystal nanocavity, providing a modulation depth of more than 10 dB at telecom wavelengths. This work shows the feasibility of ...

  8. Photovoltaic modules integrated with a metal curtain wall

    SciTech Connect (OSTI)

    Yoshino, M.; Nakada, N.; Mori, T.; Yamagishi, K.; Yoshida, S. [YKK Corp., Kurobe, Toyama (Japan); Higashi, Y.; Shirasawa, K. [KYOCERA Corp., Yohkaichi, Shiga (Japan)

    1994-12-31T23:59:59.000Z

    An integrated photovoltaic system for buildings has many advantages. To realize building integration of photovoltaics, the authors have initially designed a PV module integrated with a metal curtain wall. PV modules are installed as spandrel panels and consist of long and slender PV sub-modules. These sub-modules have an encapsulated structure consisting of: glass, EVA, solar cells, EVA, aluminum base plate. The authors also present initial PV performance data from the experimental wall. In this wall, almost the same maximum P{sub max} of 64 W/m{sup 2} was obtained and the module temperature was approximately 10 C lower compared with conventional superstrate-type PV modules which have 1.3 times the solar cells of this module. Moreover, aesthetic requirements for this module are discussed in this paper.

  9. Application-based Modules using Apprentice Learning for CS 2

    E-Print Network [OSTI]

    Astrachan, Owen

    Application-based Modules using Apprentice Learning for CS 2 Owen Astrachan Duke University ola module supports an apprentice style of learning wherein stu- dents use and modify implementations of data

  10. HyperionOpexModule Budget/8MonthReview

    E-Print Network [OSTI]

    Hitchcock, Adam P.

    HyperionOpexModule­ Budget/8MonthReview #12;Hyperion Opex Module ­ Budget/8 Month Review 1 ................................................................................................................................................... 6 Step 4 ­ Enter the Forecast and Budget .............................................................................................................................. 14 Copy 8 Month Review into next year's budget

  11. abdominal intensity modulated: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Optics, John Wiley, New York, NY, USA. ... Webb, S.: 2001a, Intensity-Modulated Radiation Therapy, Institute of Physics ... Ying X 2004-05-25 2 Trellis coded modulation and...

  12. English Bachelor Modules Dep. EI 09/14 Modul ID Modulbezeichnung Sem. ECTS

    E-Print Network [OSTI]

    Kuehnlenz, Kolja

    English Bachelor Modules Dep. EI 09/14 Modul ID Modulbezeichnung Sem. ECTS Lehrform V/Ü/P SWS Prüfungsart Spra- che EI0679 Basic Laboratory Course on Telecommunications WS/SS 5 0/0/4 4 7x s, 30 min (je 1/7) E EI0554 Blockpraktikum C++ WS/SS 6 2/0/4 6 s, 60 min (60%) + m (40%) + l (SL) D/E EI0607

  13. Generalised column removal for graded homomorphisms between Specht modules

    E-Print Network [OSTI]

    Fayers, Matthew

    , and in particular the study of their graded Specht modules. These were defined by Brundan, Kleshchev and Wang [BKW

  14. Multidimensional signal modulation and/or demodulation for data communications

    DOE Patents [OSTI]

    Smith, Stephen F. (London, TN); Dress, William B. (Camas, WA)

    2008-03-04T23:59:59.000Z

    Systems and methods are described for multidimensional signal modulation and/or demodulation for data communications. A method includes modulating a carrier signal in a first domain selected from the group consisting of phase, frequency, amplitude, polarization and spread; modulating the carrier signal in a second domain selected from the group consisting of phase, frequency, amplitude, polarization and spread; and modulating the carrier signal in a third domain selected from the group consisting of phase, frequency, amplitude, polarization and spread.

  15. Infrared modulation spectroscopy of interfaces in amorphous silicon solar cells

    E-Print Network [OSTI]

    Schiff, Eric A.

    Infrared modulation spectroscopy of interfaces in amorphous silicon solar cells Kai Zhu a,1 , E Solar, Toano, VA 23168, USA Abstract We report infrared depletion modulation spectra for near an infrared modulation spectroscopy technique that probes the optical spectra of dopants and defects

  16. Energy Policy 30 (2002) 477499 Photovoltaic module quality in

    E-Print Network [OSTI]

    Kammen, Daniel M.

    Energy Policy 30 (2002) 477­499 Photovoltaic module quality in the Kenyan solar home systems market purchases of clean decentralized photovoltaic technologies. Small amorphous-silicon modules dominate. This article analyzes market failure associated with photovoltaic module quality in the Kenyan SHS market

  17. A Turbo Iteration Algorithm In 16QAM Hierarchical Modulation

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    A Turbo Iteration Algorithm In 16QAM Hierarchical Modulation Xu Zhe Electric and Information on the turbo code, OFDM modulation and 16QAM hierarchical modulation to increase the flexibility, and in the high SNR, it can also gain a high BER performance of low priority bit stream. Keywords- turbo iteration

  18. Electrical Characterization of Spherical Micro Solar Cell module from Kyosemi

    E-Print Network [OSTI]

    of spheres, the Kyosemi module captures light 3- dimensionally. Consequently the power output of the Kyosemi's background, the power output for the Kyosemi module depends on the reflectivity of the background will contribute to the power output of the Kyosemi module. In this investigation as much as 20­30 % difference

  19. Development and Evaluation of Test Stations for the Quality Assurance of the Silicon Micro-Strip Detector Modules for the CMS Experiment

    E-Print Network [OSTI]

    Pöttgens, Michael

    2007-01-01T23:59:59.000Z

    CMS (Compact Muon Solenoid) is one of four large-scale detectors which will be operated at the LHC (Large Hadron Collider) at the European Laboratory for Particle Physics (CERN). For the search for new physics the reconstruction of the collision products and their properties is essential. In the innermost part of the CMS detector the traces of ionizing particles are measured utilizing a silicon tracker. A large fraction of this detector is equipped with silicon micro-strip modules which provide a precise space resolution in 1-dimension. A module consists of a sensor for detection of particles, the corresponding read-out electronics (hybrid) and a mechanical support structure. Since the 15,148 modules, which will be installed in the silicon micro-strip detector, have a total sensitive surface area of about 198 m2, the inner tracker of CMS is the largest silicon tracking detector, which has ever been built. While the sensors and hybrids are produced in industry, the construction of the modules and the control o...

  20. Development of an Outdoor Concentrating Photovoltaic Module Testbed, Module Handling and Testing Procedures, and Initial Energy Production Results

    SciTech Connect (OSTI)

    Muller, M.

    2009-09-01T23:59:59.000Z

    This report addresses the various aspects of setting up a CPV testbed and procedures for handling and testing CPV modules.

  1. Speech enhancement using STFT of real and imaginary parts of modulation This paper investigates an alternate modulation (RI-

    E-Print Network [OSTI]

    Speech enhancement using STFT of real and imaginary parts of modulation signals Abstract This paper investigates an alternate modulation (RI- modulation) AMS-based framework for speech enhancement, in which real subtraction. Experiments presented also show that while this framework is suited to speech enhancement

  2. Organizational Factors Impacting Implementation of Culturally Competent Care Modules in a Large Health Maintenance Organization

    E-Print Network [OSTI]

    Koh, Karen Leanne

    2011-01-01T23:59:59.000Z

    Modules in a Large Health Maintenance Organization By KarenModules in a Large Health Maintenance Organization Copyright

  3. The Protein Phosphatases of Synechocystis sp. Strain PCC 6803: Open Reading Frames sll1033 and sll1387 Encode Enzymes That Exhibit both Protein-Serine and Protein-Tyrosine Phosphatase Activity In Vitro.

    SciTech Connect (OSTI)

    Li, Ruiliang; Potters, M B.; Shi, Liang; Kennelly, Peter J.

    2005-09-01T23:59:59.000Z

    The open reading frames (ORFs) encoding two potential protein-serine/threonine phosphatases from the cyanobacterium Synechocystis sp. strain PCC 6803 were cloned and their protein products expressed in Escherichia coli cells. The product of ORF sll1033, SynPPM3, is a homologue of the PPM family of protein-serine/threonine phosphatases found in all eukaryotes as well as many members of the Bacteria. Surprisingly, the recombinant protein phosphatase dephosphorylated phosphotyrosine- as well as phosphoserine-containing proteins in vitro. While kinetic analyses indicate that the enzyme was more efficient at dephosphorylating the latter, replacement of Asp(608) by asparagine enhanced activity toward a phosphotyrosine-containing protein fourfold. The product of ORF sll1387, SynPPP1, is the sole homolog of the PPP family of protein phosphatases encoded by the genome of Synechocystis sp. strain PCC 6803. Like many other bacterial PPPs, the enzyme dephosphorylated phosphoserine- and phosphotyrosine-containing proteins with comparable efficiencies. However, while previously described PPPs from prokaryotic organisms required the addition of exogenous metal ion cofactors, such as Mg(2+) or Mn(2+), for activity, recombinantly produced SynPPP1 displayed near-maximal activity in the absence of added metals. Inductively coupled plasma mass spectrometry indicated that recombinant SynPPP1 contained significant quantities, 0.32 to 0.44 mol/mole total, of Mg and Mn. In this respect, the cyanobacterial enzyme resembled eukaryotic members of the PPP family, which are metalloproteins. mRNA encoding SynPPP1 or SynPPM3 could be detected in cells grown under many, but not all, environmental conditions.

  4. Fan-beam intensity modulated proton therapy

    SciTech Connect (OSTI)

    Hill, Patrick [Department of Radiation Oncology, University of Iowa Hospitals and Clinics, Iowa City, Iowa 52242 (United States)] [Department of Radiation Oncology, University of Iowa Hospitals and Clinics, Iowa City, Iowa 52242 (United States); Westerly, David [Department of Radiation Oncology, University of Colorado School of Medicine, Aurora, Colorado 80045 (United States)] [Department of Radiation Oncology, University of Colorado School of Medicine, Aurora, Colorado 80045 (United States); Mackie, Thomas [Medical Devices, Morgridge Institute for Research, University of Wisconsin, Madison, Wisconsin 53715 (United States)] [Medical Devices, Morgridge Institute for Research, University of Wisconsin, Madison, Wisconsin 53715 (United States)

    2013-11-15T23:59:59.000Z

    Purpose: This paper presents a concept for a proton therapy system capable of delivering intensity modulated proton therapy using a fan beam of protons. This system would allow present and future gantry-based facilities to deliver state-of-the-art proton therapy with the greater normal tissue sparing made possible by intensity modulation techniques.Methods: A method for producing a divergent fan beam of protons using a pair of electromagnetic quadrupoles is described and particle transport through the quadrupole doublet is simulated using a commercially available software package. To manipulate the fan beam of protons, a modulation device is developed. This modulator inserts or retracts acrylic leaves of varying thickness from subsections of the fan beam. Each subsection, or beam channel, creates what effectively becomes a beam spot within the fan area. Each channel is able to provide 0–255 mm of range shift for its associated beam spot, or stop the beam and act as an intensity modulator. Results of particle transport simulations through the quadrupole system are incorporated into the MCNPX Monte Carlo transport code along with a model of the range and intensity modulation device. Several design parameters were investigated and optimized, culminating in the ability to create topotherapy treatment plans using distal-edge tracking on both phantom and patient datasets.Results: Beam transport calculations show that a pair of electromagnetic quadrupoles can be used to create a divergent fan beam of 200 MeV protons over a distance of 2.1 m. The quadrupole lengths were 30 and 48 cm, respectively, with transverse field gradients less than 20 T/m, which is within the range of water-cooled magnets for the quadrupole radii used. MCNPX simulations of topotherapy treatment plans suggest that, when using the distal edge tracking delivery method, many delivery angles are more important than insisting on narrow beam channel widths in order to obtain conformal target coverage. Overall, the sharp distal falloff of a proton depth-dose distribution was found to provide sufficient control over the dose distribution to meet objectives, even with coarse lateral resolution and channel widths as large as 2 cm. Treatment plans on both phantom and patient data show that dose conformity suffers when treatments are delivered from less than approximately ten angles. Treatment time for a sample prostate delivery is estimated to be on the order of 10 min, and neutron production is estimated to be comparable to that found for existing collimated systems.Conclusions: Fan beam proton therapy is a method of delivering intensity modulated proton therapy which may be employed as an alternative to magnetic scanning systems. A fan beam of protons can be created by a set of quadrupole magnets and modified by a dual-purpose range and intensity modulator. This can be used to deliver inversely planned treatments, with spot intensities optimized to meet user defined dose objectives. Additionally, the ability of a fan beam delivery system to effectively treat multiple beam spots simultaneously may provide advantages as compared to spot scanning deliveries.

  5. Photovoltaic module with light reflecting backskin

    DOE Patents [OSTI]

    Gonsiorawski, Ronald C. (Danvers, MA)

    2007-07-03T23:59:59.000Z

    A photovoltaic module comprises electrically interconnected and mutually spaced photovoltaic cells that are encapsulated by a light-transmitting encapsulant between a light-transparent front cover and a back cover, with the back cover sheet being an ionomer/nylon alloy embossed with V-shaped grooves running in at least two directions and coated with a light reflecting medium so as to provide light-reflecting facets that are aligned with the spaces between adjacent cells and oriented so as to reflect light falling in those spaces back toward said transparent front cover for further internal reflection onto the solar cells, whereby substantially all of the reflected light will be internally reflected from said cover sheet back to the photovoltaic cells, thereby increasing the current output of the module. The internal reflector improves power output by as much as 67%.

  6. Semimetalic graphene in a modulated electric potential

    E-Print Network [OSTI]

    J. H. Ho; Y. H. Chiu; S. J. Tsai; M. F. Lin

    2008-09-09T23:59:59.000Z

    The $\\pi$-electronic structure of graphene in the presence of a modulated electric potential is investigated by the tight-binding model. The low-energy electronic properties are strongly affected by the period and field strength. Such a field could modify the energy dispersions, destroy state degeneracy, and induce band-edge states. It should be noted that a modulated electric potential could make semiconducting graphene semimetallic, and that the onset period of such a transition relies on the field strength. There exist infinite Fermi-momentum states in sharply contrast with two crossing points (Dirac points) for graphene without external fields. The finite density of states (DOS) at the Fermi level means that there are free carriers, and, at the same time, the low DOS spectrum exhibits many prominent peaks, mainly owing to the band-edge states.

  7. Hot gas cross flow filtering module

    DOE Patents [OSTI]

    Lippert, Thomas E. (Murrysville Boro, PA); Ciliberti, David F. (Murrysville Boro, PA)

    1988-01-01T23:59:59.000Z

    A filter module for use in filtering particulates from a high temperature gas has a central gas duct and at least one horizontally extending support mount affixed to the duct. The support mount supports a filter element thereon and has a chamber therein, which communicates with an inner space of the duct through an opening in the wall of the duct, and which communicates with the clean gas face of the filter element. The filter element is secured to the support mount over an opening in the top wall of the support mount, with releasable securement provided to enable replacement of the filter element when desired. Ceramic springs may be used in connection with the filter module either to secure a filter element to a support mount or to prevent delamination of the filter element during blowback.

  8. Graphene terahertz modulators by ionic liquid gating

    E-Print Network [OSTI]

    Wu, Yang; Qiu, Xuepeng; Liu, Jingbo; Deorani, Praveen; Banerjee, Karan; Son, Jaesung; Chen, Yuanfu; Chia, Elbert E M; Yang, Hyunsoo

    2015-01-01T23:59:59.000Z

    Graphene based THz modulators are promising due to the conical band structure and high carrier mobility of graphene. Here, we tune the Fermi level of graphene via electrical gating with the help of ionic liquid to control the THz transmittance. It is found that, in the THz range, both the absorbance and reflectance of the device increase proportionately to the available density of states due to intraband transitions. Compact, stable, and repeatable THz transmittance modulation up to 93% (or 99%) for a single (or stacked) device has been demonstrated in a broad frequency range from 0.1 to 2.5 THz, with an applied voltage of only 3 V at room temperature.

  9. Resonant Visible Light Modulation with Graphene

    E-Print Network [OSTI]

    Yu, Renwen; de Abajo, F Javier Garcia

    2015-01-01T23:59:59.000Z

    Fast modulation and switching of light at visible and near-infrared (vis-NIR) frequencies is of utmost importance for optical signal processing and sensing technologies. No fundamental limit appears to prevent us from designing wavelength-sized devices capable of controlling the light phase and intensity at gigaherts (and even terahertz) speeds in those spectral ranges. However, this problem remains largely unsolved, despite recent advances in the use of quantum wells and phase-change materials for that purpose. Here, we explore an alternative solution based upon the remarkable electro-optical properties of graphene. In particular, we predict unity-order changes in the transmission and absorption of vis-NIR light produced upon electrical doping of graphene sheets coupled to realistically engineered optical cavities. The light intensity is enhanced at the graphene plane, and so is its absorption, which can be switched and modulated via Pauli blocking through varying the level of doping. Specifically, we explor...

  10. Materials Testing for PV Module Encapsulation

    SciTech Connect (OSTI)

    Jorgensen, G.; Terwilliger, K.; Glick, S.; Pern, J.; McMahon, T.

    2003-05-01T23:59:59.000Z

    Important physical properties of materials used in PV module packaging are presented. High-moisture-barrier, high-resistivity, adhesion-promoting coatings on polyethyl-ene terephthalate (PET) films have been fabricated and characterized for use in PV module application and com-pared to standard polymer backsheet materials. Ethylene vinyl acetate (EVA) and an encapsulant replacement for EVA are studied for their water vapor transmission rate (WVTR) and adhesion properties. WVTR, at test conditions up to 85C/100% relative humidity (RH), and adhesion val-ues are measured before and after filtered xenon arc lamp ultraviolet (UV) exposure and damp heat exposure at 85C/85% RH. Water ingress is quantified by weight gain and embedded humidity sensors.

  11. Light-shift modulated photon-echo

    E-Print Network [OSTI]

    Chanelière, Thierry

    2015-01-01T23:59:59.000Z

    We show that the AC-Stark shift (light-shift) is a powerful and versatile tool to control the emission of a photon-echo in the context of optical storage. As a proof-of-principle, we demonstrate that the photon-echo efficiency can be fully modulated by applying light-shift control pulses in an erbium doped solid. The control of the echo emission is attributed to the spatial gradient induced by the light-shift beam.

  12. Effects of Metastabilities on CIGS Photovoltaic Modules

    Broader source: Energy.gov [DOE]

    This poster describes a SunShot Initiative solar project led by a team from Nexcis Photovoltaic Technology entitled "Effects of Metastabilities on CIGS Photovoltaic Modules." The team studied the driving force of the mechanisms which governs the different observed phases during storage, light exposition and annealing. The aim of this study is to obtain a better understanding of this phenomenon and hence a better evaluation of its impact on solar panel reliability.

  13. Positive modulator of bone morphogenic protein-2

    DOE Patents [OSTI]

    Zamora, Paul O. (Gaithersburg, MD); Pena, Louis A. (Poquott, NY); Lin, Xinhua (Plainview, NY); Takahashi, Kazuyuki (Germantown, MD)

    2009-01-27T23:59:59.000Z

    Compounds of the present invention of formula I and formula II are disclosed in the specification and wherein the compounds are modulators of Bone Morphogenic Protein activity. Compounds are synthetic peptides having a non-growth factor heparin binding region, a linker, and sequences that bind specifically to a receptor for Bone Morphogenic Protein. Uses of compounds of the present invention in the treatment of bone lesions, degenerative joint disease and to enhance bone formation are disclosed.

  14. Downhole drilling network using burst modulation techniques

    DOE Patents [OSTI]

    Hall; David R. (Provo, UT), Fox; Joe (Spanish Fork, UT)

    2007-04-03T23:59:59.000Z

    A downhole drilling system is disclosed in one aspect of the present invention as including a drill string and a transmission line integrated into the drill string. Multiple network nodes are installed at selected intervals along the drill string and are adapted to communicate with one another through the transmission line. In order to efficiently allocate the available bandwidth, the network nodes are configured to use any of numerous burst modulation techniques to transmit data.

  15. Light-shift modulated photon-echo

    E-Print Network [OSTI]

    Thierry Chanelière; Gabriel Hétet

    2015-02-24T23:59:59.000Z

    We show that the AC-Stark shift (light-shift) is a powerful and versatile tool to control the emission of a photon-echo in the context of optical storage. As a proof-of-principle, we demonstrate that the photon-echo efficiency can be fully modulated by applying light-shift control pulses in an erbium doped solid. The control of the echo emission is attributed to the spatial gradient induced by the light-shift beam.

  16. Solar Cell Modules With Improved Backskin

    DOE Patents [OSTI]

    Gonsiorawski, Ronald C. (Danvers, MA)

    2003-12-09T23:59:59.000Z

    A laminated solar cell module comprises a front light transmitting support, a plurality of interconnected solar cells encapsulated by a light-transmitting encapsulant material, and an improved backskin formed of an ionomer/nylon alloy. The improved backskin has a toughness and melting point temperature sufficiently great to avoid any likelihood of it being pierced by any of the components that interconnect the solar cells.

  17. Low thermal resistance power module assembly

    DOE Patents [OSTI]

    Hassani, Vahab (Denver, CO); Vlahinos, Andreas (Castle Rock, CO); Bharathan, Desikan (Arvada, CO)

    2010-12-28T23:59:59.000Z

    A power module assembly (400) with low thermal resistance and enhanced heat dissipation to a cooling medium. The assembly includes a heat sink or spreader plate (410) with passageways or openings (414) for coolant that extend through the plate from a lower surface (411) to an upper surface (412). A circuit substrate (420) is provided and positioned on the spreader plate (410) to cover the coolant passageways. The circuit substrate (420) includes a bonding layer (422) configured to extend about the periphery of each of the coolant passageways and is made up of a substantially nonporous material. The bonding layer (422) may be solder material which bonds to the upper surface (412) of the plate to provide a continuous seal around the upper edge of each opening (414) in the plate. The assembly includes power modules (430) mounted on the circuit substrate (420) on a surface opposite the bonding layer (422). The power modules (430) are positioned over or proximal to the coolant passageways.

  18. Determination of Thermoelectric Module Efficiency A Survey

    SciTech Connect (OSTI)

    Wang, Hsin [ORNL; McCarty, Robin [Marlow Industries, Inc; Salvador, James R. [GM R& D and Planning, Warren, Michigan; Yamamoto, Atsushi [AIST, Japan; Konig, Jan [Fraunhofer-Institute, Freiburg, Germany

    2014-01-01T23:59:59.000Z

    The development of thermoelectrics (TE) for energy conversion is in the transition phase from laboratory research to device development. There is an increasing demand to accurately determine the module efficiency, especially for the power generation mode. For many thermoelectrics, the figure of merit, ZT, of the material sometimes cannot be fully realized at the device level. Reliable efficiency testing of thermoelectric modules is important to assess the device ZT and provide the end-users with realistic values on how much power can be generated under specific conditions. We conducted a general survey of efficiency testing devices and their performance. The results indicated the lack of industry standards and test procedures. This study included a commercial test system and several laboratory systems. Most systems are based on the heat flow meter method and some are based on the Harman method. They are usually reproducible in evaluating thermoelectric modules. However, cross-checking among different systems often showed large errors that are likely caused by unaccounted heat loss and thermal resistance. Efficiency testing is an important area for the thermoelectric community to focus on. A follow-up international standardization effort is planned.

  19. Designed TPR Modules as Novel Anticancer Agents

    SciTech Connect (OSTI)

    Cortajarena,A.; Yi, F.; Regan, L.

    2008-01-01T23:59:59.000Z

    Molecules specifically designed to modulate protein-protein interactions have tremendous potential as novel therapeutic agents. One important anticancer target is the chaperone Hsp90, whose activity is essential for the folding of many oncogenic proteins, including HER2, IGFIR, AKT, RAF-1, and FLT-3. Here we report the design and characterization of new tetratricopeptide repeat modules, which bind to the C-terminus of Hsp90 with higher affinity and with greater specificity than natural Hsp90-binding co-chaperones. Thus, when these modules are introduced into the cell, they out-compete endogenous co-chaperones for binding, thereby inhibiting Hsp90 function. The effect of Hsp90 inhibition in this fashion is dramatic; HER2 levels are substantially decreased and BT474 HER2 positive breast cancer cells are killed. Our designs thus provide new tools with which to dissect the mechanism of Hsp90-mediated protein folding and also open the door to the development of an entirely new class of anticancer agents.

  20. Solar module having reflector between cells

    DOE Patents [OSTI]

    Kardauskas, Michael J. (Billerica, MA)

    1999-01-01T23:59:59.000Z

    A photovoltaic module comprising an array of electrically interconnected photovoltaic cells disposed in a planar and mutually spaced relationship between a light-transparent front cover member in sheet form and a back sheet structure is provided with a novel light-reflecting means disposed between adjacent cells for reflecting light falling in the areas between cells back toward said transparent cover member for further internal reflection onto the solar cells. The light-reflecting comprises a flexible plastic film that has been embossed so as to have a plurality of small V-shaped grooves in its front surface, and a thin light-reflecting coating on said front surface, the portions of said coating along the sides of said grooves forming light-reflecting facets, said grooves being formed so that said facets will reflect light impinging thereon back into said transparent cover sheet with an angle of incidence greater than the critical angle, whereby substantially all of the reflected light will be internally reflected from said cover sheet back to said solar modules, thereby increasing the current output of the module.

  1. Pre-read and post-read annealing techniques for the Harshaw/Filtrol Inc. CaSO?:Dy beta TDL chip

    E-Print Network [OSTI]

    McCarthy, Daniel Patrick

    1989-01-01T23:59:59.000Z

    is of particular importance to the overall characterization of the dosimeter. During routine use of a TLD chip there are a number of factors which may introduce error into the thermoluminescent (TL) output. Two of these factors include fading (instability... and increase the accuracy of the thermoluminescent (TL) output. These procedures are known as annealing. Annealing is the process of heating a TLD chip to predetermined temperatures, prior to irradiation and prior to reading, to increase sensitivity...

  2. Approved Module Information for CS4670, 2014/5 Module Title/Name: Software Process and Management Module Code: CS4670

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    control, assurance and management systems; quality models and metrics; software management ? testing management: software cost estimation, software, COCOMO model Quality management: nature of quality; qualityApproved Module Information for CS4670, 2014/5 Module Title/Name: Software Process and Management

  3. Approved Module Information for BF1101, 2014/5 Module Title/Name: Principles of Financial Accounting Module Code: BF1101

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    : Week 1 Introduction to accounting [No tutorials this week] 2 Accounting Principles and Conventions 3 & Teaching Rationale: This module will be delivered via lectures and tutorials. Lectures are used note that there will be no tutorials in weeks 1 & 6. Module Assessment Methods of Assessment

  4. Approved Module Information for EE1DAE, 2014/5 Module Title/Name: Digital & Analogue Electronics Module Code: EE1DAE

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    available: BEng Electrical and Electronic Engineering. BEng Electronic Engineering and Computer Science. MEng Electrical and Electronic Engineering. MEng Electronic Engineering and Computer Science. BScApproved Module Information for EE1DAE, 2014/5 Module Title/Name: Digital & Analogue Electronics

  5. Approved Module Information for BS3336, 2014/5 Module Title/Name: Applied Econometrics and Forecasting Module Code: BS3336

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for BS3336, 2014/5 Module Title/Name: Applied Econometrics Introduction to Econometrics I AND BS2248 Introduction to Econometrics II Available to Exchange Students students undertake and advances their knowledge and skills to the methods of econometric and time

  6. Approved Module Information for BS2247, 2014/5 Module Title/Name: Introduction to Econometrics 1 Module Code: BS2247

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for BS2247, 2014/5 Module Title/Name: Introduction to Econometrics 1 aims to provide the students with the most basic and important Econometrics knowledge, including simple and multiple linear regressions, and prepare them for BS2248 Introduction to Econometrics II. Pre

  7. Approved Module Information for LT2319, 2014/5 Module Title/Name: International Logistics and Purchasig Module Code: LT2319

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for LT2319, 2014/5 Module Title/Name: International Logistics-of-the-art strategic understanding of international logistics and purchasing with an emphasis on global competition. The topics include latest trends in globalization and international trade, major international logistics

  8. STFC Introductory Summer School m.j.owens@reading.ac.uk18 Sept 2012 Solar Variability and

    E-Print Network [OSTI]

    STFC Introductory Summer School m.j.owens@reading.ac.uk18 Sept 2012 Solar Variability and Climate · The climate system · Solar variability · Solar effects on climate ­ Regional and global effects · The future? #12;STFC Introductory Summer School m.j.owens@reading.ac.uk Climate system #12;The source of much

  9. Reading human relationships from their interaction with an interactive humanoid robot

    E-Print Network [OSTI]

    Kanda, Takayuki

    are different to traditional task-oriented robots, such as industrial robots, which perform certain tasks in limited applications. Interaction-oriented robots are designed to communicate with humans and to be ableReading human relationships from their interaction with an interactive humanoid robot Takayuki

  10. Academic Language Proficiency Development and Its Impact on Reading Comprehension: Within and Across Languages 

    E-Print Network [OSTI]

    Spies, Tracy

    2012-07-16T23:59:59.000Z

    A path model of second language (L2; English) oral language and reading comprehension variables was tested on a sample of 100 Spanish-speaking English-language learners enrolled in a transitional bilingual program over a 3-year period. The data...

  11. Stat 328 Reading on Six Sigma, TQM, Statistics and Business Process Improvement

    E-Print Network [OSTI]

    Vardeman, Stephen B.

    Stat 328 Reading on Six Sigma, TQM, Statistics and Business Process Improvement Primarily Adapted 28, 2001 1 Statistics and Six Sigma Programs The modern global business environment is ...ercely Sigma." The name originated at Motorola Corpo- ration in the late 1980's. Six Sigma programs at General

  12. Thursday, March 11, 2010 Pages to read: CH5, 407-422

    E-Print Network [OSTI]

    Toohey, Darin W.

    Acid Rain Thursday, March 11, 2010 Pages to read: CH5, 407-422 #12;Cap and Trade Working Already rain, to 7.6 million tons in 2008. #12;Overview of Acid Rain Phenomenon Most common term Agency announced that power plants across the country decreased emissions of SO2, a precursor to acid

  13. The Use of a Dynamic Screening of Phonological Awareness to Predict Reading Risk for Kindergarten Students

    E-Print Network [OSTI]

    Bridges, Melinda Sittner

    2009-07-30T23:59:59.000Z

    , Ph.D., Chairperson* ________________________________ Diane Frome Loeb, Ph.D. Committee Members ________________________________ Diane C. Nielsen, Ph.D. ________________________________ Mabel L. Rice, Ph... AWARENESS TO PREDICT READING RISK FOR KINDERGARTEN STUDENTS Committee: ________________________________ Hugh W. Catts, Ph.D., Chairperson ________________________________ Diane Frome Loeb, Ph...

  14. How To Write A Dissertation Bedtime Reading For People Who Do Not

    E-Print Network [OSTI]

    Sheridan, Jennifer

    1 How To Write A Dissertation or Bedtime Reading For People Who Do Not Have Time To Sleep To The Candidate: So, you are preparing to write a Ph.D. dissertation in an experimental area of Computer Science is a hypothesis or conjecture. 2. A PhD dissertation is a lengthy, formal document that argues in defense

  15. PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING INVENTORY Procedures for Completing Annual Capital Equipment Inventory

    E-Print Network [OSTI]

    Provancher, William

    PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING INVENTORY Procedures for Completing Annual Capital Equipment Inventory 1. Check off each item on the inventory report, as it is located. Place one of the small white inventory FY 2011 stickers on the equipment, as it is located. This will eliminate counting

  16. Directional Statistics for WIMP direct detection II: 2-d read-out

    E-Print Network [OSTI]

    Ben Morgan; Anne M. Green

    2005-11-17T23:59:59.000Z

    The direction dependence of the WIMP direct detection rate provides a powerful tool for distinguishing a WIMP signal from possible backgrounds. We study the the number of events required to discriminate a WIMP signal from an isotropic background for a detector with 2-d read-out using non-parametric circular statistics. We also examine the number of events needed to i) detect a deviation from rotational symmetry, due to flattening of the Milky Way halo and ii) detect a deviation in the mean direction due to a tidal stream. If the senses of the recoils are measured then of order 20-70 events (depending on the plane of the 2-d read out) will be sufficient to reject isotropy of the raw recoil angles at 90% confidence. If the senses can not be measured these number increase by roughly two orders of magnitude (compared with an increase of one order of magnitude for the case of full 3-d read-out). The distributions of the reduced angles, with the (time dependent) direction of solar motion subtracted, are far more anisotropic, however, and if the isotropy tests are applied to these angles then the numbers of events required are similar to the case of 3-d read-out. A deviation from rotational symmetry will only be detectable if the Milky Way halo is significantly flattened. The deviation in the mean direction due to a tidal stream is potentially detectable, however, depending on the density and direction of the stream.

  17. COM Oasis M4 Lottery Instructions READ THIS BEFORE YOU BEGIN

    E-Print Network [OSTI]

    Alford, Simon

    COM Oasis M4 Lottery Instructions · READ THIS BEFORE YOU BEGIN ­ Available to assist you at `Scheduling Forms and Calendars" ­ With a completed worksheet in hand, you can begin working in Oasis to enter frame/start date. ­ You can include up to a maximum of 250 preference choices in Oasis for your rank

  18. Empowered by Solomon, Slate reads and solves the Dreadsbury Mansion Mystery. New Developments in Interoperability

    E-Print Network [OSTI]

    Empowered by Solomon, Slate reads and solves the Dreadsbury Mansion Mystery. New Developments Slate and other systems has been achieved using IKL. IKL is flexible, highly expressive, and designed purposes. The ultimate test was the IKRIS Capstone Demo in which Slate, KANI, and Noöscape shared knowl

  19. Can your dog read your mind? Understanding the causes of canine perspective taking

    E-Print Network [OSTI]

    Indiana University

    Can your dog read your mind? Understanding the causes of canine perspective taking Monique A. R, some have hypothesized that domestic dogs may have theory of mind, or the ability to infer what other lupus . Perspective taking . Social cognition . Theory of mind . Domestication . Dog shelter. Learning

  20. Read the labels Compact interferometers that exploit the wave character of atoms have the potential of

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 ATOM CHIPS Read the labels Compact interferometers that exploit the wave character of atoms have that harnesses the internal structure of atoms should bring such applications a step closer. Chris Westbrook Atom is increased by the ratio of their rest energy to the energy of the photon -- some ten orders of magnitude1