National Library of Energy BETA

Sample records for modified size description

  1. Thermodynamical description of modified generalized Chaplygin gas model of dark energy

    E-Print Network [OSTI]

    H. Ebadi; H. Moradpour

    2015-04-15

    We consider a universe filled by a modified generalized Chaplygin gas together with a pressureless dark matter component. We get a thermodynamical interpretation for the modified generalized Chaplygin gas confined to the apparent horizon of FRW universe, whiles dark sectors do not interact with each other. Thereinafter, by taking into account a mutual interaction between the dark sectors of the cosmos, we find a thermodynamical interpretation for interacting modified generalized Chaplygin gas. Additionally, probable relation between the thermal fluctuations of the system and the assumed mutual interaction is investigated. Finally, we show that if one wants to solve the coincidence problem by using this mutual interaction, then the coupling constants of the interaction will be constrained. The corresponding constraint is also addressed. Moreover, the thermodynamic interpretation of using either a generalized Chaplygin gas or a Chaplygin gas to describe dark energy is also addressed throughout the paper.

  2. Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent BondingMeeting | Department|DepartmentalDayWhenDescription Expert

  3. SEDIMENT DESCRIPTIONS R/V NATHANIEL B. PALMER

    E-Print Network [OSTI]

    SEDIMENT DESCRIPTIONS for R/V NATHANIEL B. PALMER Cruise 1A, 2003 #12;DESCRIPTIONS OF SEDIMENT. Petrushak Sediment Descriptions Florida State University Matthew G. Curren Modified by Steven Petrushak.................................................................................................8 SEDIMENT CLASSIFICATION

  4. A low-temperature extraction-solvothermal route to the fabrication of micro-sized MoS{sub 2} spheres modified by Cyanex 301

    SciTech Connect (OSTI)

    Shi Huaqiang; Fu Xun . E-mail: fuxun4483@163.com; Zhou Xiaodong; Wang Debao; Hu Zhengshui

    2006-06-15

    Mono-dispersed molybdenum disulfide micro-spheres with the diameter of 1-3 {mu}m have been successfully synthesized via extraction-solvothermal method at 150 deg. C. The extractant Cyanex 301 (di-(2,4,4-trimethylpentyl) dithiophosphinic acid) acted as phase transferring agent, reductant, sulfur source and morphology-controlling agent in the whole procedure. The obtained MoS{sub 2} micro-spheres were characterized by XRD, EDS, SEM, TEM, HRTEM, IR, UV-Vis and TG, respectively. The influences of reaction conditions were discussed while a mechanism was proposed to explain the formation of the micro-spheres. Moreover, the tribological properties of liquid paraffin (LP) containing Cyanex 301-modified MoS{sub 2} micro-spheres were also evaluated on a four-ball machine, showing that the obtained MoS{sub 2} product was an excellent oil additive in LP and such lubricant had good anti-wear and friction-reducing properties. - Graphical abstract: Mono-dispersed MoS{sub 2} micro-spheres with the diameter of 1-3 {mu}m were synthesized in gasoline via extraction-solvothermal method at 150 deg. C. The MoS{sub 2} product could be well dispersed into organic solvents again and the tribological properties of liquid paraffin (LP) containing MoS{sub 2} micro-spheres were improved.

  5. Modified Boltzmann Transport Equation and Freeze Out

    E-Print Network [OSTI]

    Csernai, L P; Molnár, E; Nyiri, A; Tamosiunas, K

    2005-01-01

    We study Freeze Out process in high energy heavy ion reaction. The description of the process is based on the Boltzmann Transport Equation (BTE). We point out the basic limitations of the BTE approach and introduce Modified BTE. The Freeze Out dynamics is presented in the 4-dimensional space-time in a layer of finite thickness, and we employ Modified BTE for the realistic Freeze Out description.

  6. Modified Boltzmann Transport Equation and Freeze Out

    E-Print Network [OSTI]

    L. P. Csernai; V. K. Magas; E. Molnar; A. Nyiri; K. Tamosiunas

    2005-05-26

    We study Freeze Out process in high energy heavy ion reaction. The description of the process is based on the Boltzmann Transport Equation (BTE). We point out the basic limitations of the BTE approach and introduce Modified BTE. The Freeze Out dynamics is presented in the 4-dimensional space-time in a layer of finite thickness, and we employ Modified BTE for the realistic Freeze Out description.

  7. Testbed Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With U.S. CoalMexicoConference Tight09/2011 TeppeiTestbed Description

  8. SEDIMENT DESCRIPTIONS R/V NATHANIEL B. PALMER

    E-Print Network [OSTI]

    SEDIMENT DESCRIPTIONS for R/V NATHANIEL B. PALMER Cruise 1, 2003 NBP03-01 #12;DESCRIPTIONS OF SEDIMENT RECOVERED BY THE R/V NATHANIEL B. PALMER, UNITED STATES ANTARCTIC PROGRAM CRUISE 1, 2003 Edited by Steven B. Petrushak Sediment Descriptions Florida State University Matthew G. Curren Modified by Steven

  9. Modified Entropic Gravity and Cosmology

    E-Print Network [OSTI]

    Miguel Zumalacarregui

    2012-02-06

    It has been recently proposed that gravity might be an entropic force. Although a well defined fundamental description for such a mechanism is still lacking, it is still possible to address the viability of phenomenological models of entropic-inspired modified gravities. I will summarize some recent work directed to using cosmology as a tool to constraint scenarios in which the modifications are aimed to explain the physics behind dark energy and inflation. A phenomenological modification is able to explain cosmic acceleration at the background level and fit observations, but simple inflation models with higher curvature corrections are in conflict with late time matter domination.

  10. Phenomenological description of quantum gravity inspired modified classical electrodynamics

    E-Print Network [OSTI]

    R. Montemayor; Luis F. Urrutia

    2007-01-26

    We discuss a large class of phenomenological models incorporating quantum gravity motivated corrections to electrodynamics. The framework is that of electrodynamics in a birefringent and dispersive medium with non-local constitutive relations, which are considered up to second order in the inverse of the energy characterizing the quantum gravity scale. The energy-momentum tensor, Green functions and frequency dependent refraction indices are obtained, leading to departures from standard physics. The effective character of the theory is also emphasized by introducing a frequency cutoff. The analysis of its effects upon the standard notion of causality is performed, showing that in the radiation regime the expected corrections get further suppressed by highly oscillating terms, thus forbiding causality violations to show up in the corresponding observational effects.

  11. Modified Empirical Parametrization of Fragmentation Cross Sections

    E-Print Network [OSTI]

    K. Sümmerer; B. Blank

    1999-11-17

    New experimental data obtained mainly at the GSI/FRS facility allow to modify the empirical parametrization of fragmentation cross sections, EPAX. It will be shown that minor modifications of the parameters lead to a much better reproduction of measured cross sections. The most significant changes refer to the description of fragmentation yields close to the projectile and of the memory effect of neutron-deficient projectiles.

  12. revision:19950904 modified:19950904

    E-Print Network [OSTI]

    Shelah, Saharon

    530 revision:1995­09­04 modified:1995­09­04 A model in which every Boolean algebra has many:1995­09­04 modified:1995­09­04 1 Definitions and facts In this section we give some basic definitions­ algebras using the following well­known fact. 2 #12; 530 revision:1995­09­04 modified:1995­09­04 Fact 1

  13. revision:19951120 modified:19951201

    E-Print Network [OSTI]

    Shelah, Saharon

    609 revision:1995­11­20 modified:1995­12­01 A ZFC Dowker space in # #+1 : an application of pcf; 609 revision:1995­11­20 modified:1995­12­01 Exactly two Dowker spaces were constructed in ZFC so far # in this interval is the true cofinality of a 2 #12; 609 revision:1995­11­20 modified:1995­12­01 reduced product # B

  14. VISION Model: Description

    SciTech Connect (OSTI)

    2009-01-18

    Description of VISION model, which is used to estimate the impact of highway vehicle technologies and fuels on energy use and carbon emissions to 2050.

  15. Detailed Income Statement Descriptions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Title* Program Description 5 of 12 maintenance, and construction of BPA's transmission system. RESEARCH & DEVELOPMENT Conducts research focused on technologies related to...

  16. Marketing Plan Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    Marketing Plan Company Description: Consumer company that provides a product to helps boost Marketing Swat Team Project Description and Deliverables: The team will Identify the best online vehicles of promotions from YouTube celebs, co- marketing with related businesses, affiliate marketing, cross marketing

  17. Accounting Projects Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    and international tax work for individuals, closely held companies, family offices and clients expecting a liquidityAccounting Projects Company Description: CPA firm performing accounting services, bookkeeping. Company Description: a full service CPA firm headquartered in the San Francisco Bay Area. Nationally

  18. revision:19950829 modified:19950829

    E-Print Network [OSTI]

    Shelah, Saharon

    595 revision:1995­08­29 modified:1995­08­29 Embedding Cohen algebras using pcf theory Saharon and Department of Mathematics Rutgers University New Brunswick, NJ 08854, USA done: July 1995 printed: October 6 and Humanities. Publication 595. 1 #12; 595 revision:1995­08­29 modified:1995­08­29 Sh:595 October 6, 2003 2 3

  19. revision:19950227 modified:19950227

    E-Print Network [OSTI]

    Shelah, Saharon

    495 revision:1995­02­27 modified:1995­02­27 ``On the Strong Equality between Supercompactness and Department of Mathematics Rutgers University New Brunswick, New Jersey 08904 February 19, 1995 Abstract: We:1995­02­27 modified:1995­02­27 §0 Introduction and Preliminaries It is a well known fact

  20. revision:19951225 modified:19951226

    E-Print Network [OSTI]

    Shelah, Saharon

    496 revision:1995­12­25 modified:1995­12­26 ``Menas' Result is Best Possible'' by Arthur W. Apter Brunswick, New Jersey 08904 December 11, 1995 Abstract: Generalizing some earlier techniques due supporting this research. 1 #12; 496 revision:1995­12­25 modified:1995­12­26 §0 Introduction

  1. revision:19950418 modified:19950422

    E-Print Network [OSTI]

    Shelah, Saharon

    571 revision:1995­04­18 modified:1995­04­22 A consistency result on weak reflection James Cummings The research for this paper was done in the period July 1994 -- January 1995. 1 #12; 571 revision:1995­04­18 modified:1995­04­22 have an unbounded set of cofinalities at which strong non­reflection holds

  2. revision:19950904 modified:19950904

    E-Print Network [OSTI]

    Shelah, Saharon

    291 revision:1995­09­04 modified:1995­09­04 A Variety with Solvable, but not Uniformly Solvable #12; 291 revision:1995­09­04 modified:1995­09­04 Abstract In the literature two notions decidable, word problem. Other related examples are given as well. #12; 291 revision:1995

  3. revision:19950923 modified:19950923

    E-Print Network [OSTI]

    Shelah, Saharon

    (456) revision:1995­09­23 modified:1995­09­23 UNIVERSAL IN (­Israel Binational Science Foundation; Pub. No.456 Typeset by A M S­T E X 1 #12; (456) revision:1995­09­23 modified:1995­09­23 2 SAHARON SHELAH We deal with the existence of reduced separable (abelian) groups

  4. revision:20040330 modified:20040330

    E-Print Network [OSTI]

    Shelah, Saharon

    E43 revision:2004­03­30 modified:2004­03­30 # # # # Revised GCH Saharon Shelah March 28, 2004 shelah@math.huji.ac.il The Hebrew University of Jerusalem Rutgers University 1 #12; E43 revision:2004­03­30 modified:2004­03­30 # # # # Dedicated to Azriel Levy Papers are available from Mathematics arXive http

  5. Modified Fresnel zone plates that produce sharp Gaussian focal spots

    E-Print Network [OSTI]

    Jahns, Jürgen

    Modified Fresnel zone plates that produce sharp Gaussian focal spots Qing Cao and Ju¨rgen Jahns Fresnel zone plate that can produce an approximate Gaussian focal spot is proposed for the focusing of 7.7 nm can be produced by a modified Fresnel zone plate with a minimum structure size of 30 nm

  6. Job Description Library Create a New Job Description

    E-Print Network [OSTI]

    Pulfrey, David L.

    UBC eRecruit Job Description Library #12;Page 4 Create a New Job Description Navigation: Job Description Library>Add/Edit/Copy Job Descriptions Step 1: Use this page to enter preliminary Job Description, Location: Enter the codes associated with the department. Employment Group, Job Family, Job Code/Classification

  7. University of Iceland Description

    E-Print Network [OSTI]

    Bristol, University of

    University of Iceland __________________________________________________________________________________________ Description The University of Iceland (Háskóli Íslands) is a state university founded in 1911. Today, the University of Iceland serves a nation of approximately 320,000 people and provides instruction for some 15

  8. Towards a Video Game Description Language Marc Ebner1

    E-Print Network [OSTI]

    Togelius, Julian

    recognised the need to create a Video Game Description Language (VGDL), we formed a group to address purpose of the language proposed here is to be able to specify complete video games, so that they could; users could modify existing games very quickly, or have a library of existing implementations defined

  9. Journal of Mammalogy, 84(1):197204, 2003 GROUP SIZE BUT NOT DISTANCE TO COVER INFLUENCES

    E-Print Network [OSTI]

    Grether, Gregory

    wallabies (Macropus agilis). The ability to modify time allocation as a function of group size allocated to foraging and vigilance as a function of group size but were insensitive to distance from cover to manage predation risk, the ability to modify time allocation as a function of group size (Bednekoff

  10. Feasibility Study Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    Feasibility Study Company Description: The ZZZZZ Office works with start-ups and established...realized with more than 15,000 employees. Short Project Name: Migrate small waste treatment system from Latin America houses which are built in areas where there is no sewer drain line. In order to covert black waters

  11. Title: Marketing Assistant Description

    E-Print Network [OSTI]

    Schweik, Charles M.

    Title: Marketing Assistant Description: The UMass Amherst Career Services Office is searching for a student interested in marketing. The Marketing Assistant will work closely with our in-office marketing Brainstorm new and exciting marketing strategies, including social media Participate and contribute

  12. Project Description 1 Introduction

    E-Print Network [OSTI]

    VanDeGrift, Tammy

    Project Description 1 Introduction This project will investigate "commonsense computing": what, and 3. Apply our findings to changes in classroom pedagogy in ways that can be rigorously evalu- ated. 1 0736572 #12;In the exploratory part of this project, which we are proposing here, we will concentrate

  13. November 2001 Program Description

    E-Print Network [OSTI]

    LBNL-44789 November 2001 Program Description A PC Program WINDOW 5.0 User Manual For Analyzing November 2001 WINDOW 5.0 User Manual Robin Mitchell, Christian Kohler, and Dariush Arasteh Windows, California Dragan Curcija Carli, Inc Amherst, Massachusetts November 2001 © Regents of the University

  14. Market Research Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    development - Market research for enterprise and education adoption - Plan and execute a company-wide pingMarket Research Company Description: A company focused on developing web-based graphical and future products and then develop the necessary strategies and collateral to stay on the bleeding edge

  15. Entrepreneurship Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    with an industry leader). The team will also help to identify key management team members that may be brought on for venture capital funding presentation, key management team member recommendations. Company Description and headquartered in Utah. Our company conducts pharmaceutical trials in the neurosciences, particularly

  16. Information Systems Projects Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    from database. Company Description: We have been in business since January, 1970. Family ownedInformation Systems Projects Company Description: We are a successful small business that provides/fixes to our MS Access program. This will allow us to use the program more smoothly, etc. Company Description

  17. YUCCA MOUNTAIN SITE DESCRIPTION

    SciTech Connect (OSTI)

    A.M. Simmons

    2004-04-16

    The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

  18. Demoing the Modified TALON Robot

    Broader source: Energy.gov [DOE]

    A technician at Idaho National Laboratory demonstrates the modified TALON robot; which is being sent to assist emergency workers at Japan's Fukishima nuclear reactor.

  19. Description of the Scenario Machine

    E-Print Network [OSTI]

    V. M. Lipunov; K. A. Postnov; M. E. Prokhorov; A. I. Bogomazov

    2007-09-26

    We present here an updated description of the "Scenario Machine" code. This tool is used to carry out a population synthesis of binary stars. Previous version of the description can be found at http://xray.sai.msu.ru/~mystery//articles/review/contents.html

  20. MESOSCALE DESCRIPTION OF DEFECTED MATERIALS

    E-Print Network [OSTI]

    Vinals, Jorge

    MESOSCALE DESCRIPTION OF DEFECTED MATERIALS Jorge Vi~nals School of Physics and Astronomy. Laughlin) Small but finite wavenumber and finite frequency ("mesoscale") response functions and transport;MESOSCALE DESCRIPTION B B B B B B B A B A B A A B B A A A A BB A B Microscopic Mesoscopic Macroscopic vn

  1. SWITCH Model AND Data Description: 2050 Timeframe................................................ 2 SWITCH Model Description ........................................................................................................2

    E-Print Network [OSTI]

    Kammen, Daniel M.

    1 SWITCH Model AND Data Description: 2050 Timeframe................................................ 2 SWITCH Model Description.................................................................................................................................41 #12;2 SWITCH MODEL AND DATA DESCRIPTION: 2050 TIMEFRAME December 2011 SWITCH was created

  2. Miniature modified Faraday cup for micro electron beams

    DOE Patents [OSTI]

    Teruya, Alan T. (Livermore, CA); Elmer, John W. (Danville, CA); Palmer, Todd A. (Livermore, CA); Walton, Chris C. (Berkeley, CA)

    2008-05-27

    A micro beam Faraday cup assembly includes a refractory metal layer with an odd number of thin, radially positioned traces in this refractory metal layer. Some of the radially positioned traces are located at the edge of the micro modified Faraday cup body and some of the radially positioned traces are located in the central portion of the micro modified Faraday cup body. Each set of traces is connected to a separate data acquisition channel to form multiple independent diagnostic networks. The data obtained from the two diagnostic networks are combined and inputted into a computed tomography algorithm to reconstruct the beam shape, size, and power density distribution.

  3. New Business Opportunity Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    to consumers, businesses and institutions. Short Project Name: New Prepaid Product Launch Analytics Project Description and Deliverables: We introduced "ZZZZZ", a reloadable prepaid card where customers can load funds

  4. INITIAL PLANETESIMAL SIZES AND THE SIZE DISTRIBUTION OF SMALL KUIPER BELT OBJECTS

    SciTech Connect (OSTI)

    Schlichting, Hilke E. [UCLA, Department of Earth and Space Science, 595 Charles E. Young Drive East, Los Angeles, CA 90095 (United States); Fuentes, Cesar I.; Trilling, David E., E-mail: hilke@ucla.edu [Department of Physics and Astronomy, Northern Arizona University, P.O. Box 6010, Flagstaff, AZ 86011 (United States)

    2013-08-01

    The Kuiper Belt is a remnant from the early solar system and its size distribution contains many important constraints that can be used to test models of planet formation and collisional evolution. We show, by comparing observations with theoretical models, that the observed Kuiper Belt size distribution is well matched by coagulation models, which start with an initial planetesimal population with radii of about 1 km, and subsequent collisional evolution. We find that the observed size distribution above R {approx} 30 km is primordial, i.e., it has not been modified by collisional evolution over the age of the solar system, and that the size distribution below R {approx} 30 km has been modified by collisions and that its slope is well matched by collisional evolution models that use published strength laws. We investigate in detail the resulting size distribution of bodies ranging from 0.01 km to 30 km and find that its slope changes several times as a function of radius before approaching the expected value for an equilibrium collisional cascade of material strength dominated bodies for R {approx}< 0.1 km. Compared to a single power-law size distribution that would span the whole range from 0.01 km to 30 km, we find in general a strong deficit of bodies around R {approx} 10 km and a strong excess of bodies around 2 km in radius. This deficit and excess of bodies are caused by the planetesimal size distribution left over from the runaway growth phase, which left most of the initial mass in small planetesimals while only a small fraction of the total mass is converted into large protoplanets. This excess mass in small planetesimals leaves a permanent signature in the size distribution of small bodies that is not erased after 4.5 Gyr of collisional evolution. Observations of the small Kuiper Belt Object (KBO) size distribution can therefore test if large KBOs grew as a result of runaway growth and constrained the initial planetesimal sizes. We find that results from recent KBO occultation surveys and the observed KBO size distribution can be best matched by an initial planetesimal population that contained about equal mass per logarithmic mass bin in bodies ranging from 0.4 km to 4 km in radius. We further find that we cannot match the observed KBO size distribution if most of the planetesimal mass was contained in bodies that were 10 km in radius or larger simply because their resulting size distribution cannot be sufficiently depleted over 4.5 Gyr to match observations.

  5. SEDIMENT DESCRIPTIONS R/V POLAR DUKE

    E-Print Network [OSTI]

    SEDIMENT DESCRIPTIONS R/V POLAR DUKE CRUISE IV, 1989 #12;#12;DESCRIPTIONS OF SEDIMENT RECOVERED R. Janecek Sediment Descriptions Dennis S. Cassidy F. Amisar Kaharoeddin Xinlan Liu Technical ........................................................... 10 SEDIMENT CLASSIFICATION ..................................................... 11 Pelagic Sediments

  6. SEDIMENT DESCRIPTIONS R/V POLAR DUKE

    E-Print Network [OSTI]

    #12;#12;SEDIMENT DESCRIPTIONS R/V POLAR DUKE CRUISE III, 1988 #12;#12;DESCRIPTIONS OF SEDIMENT and Thomas R. Janecek Sediment Descriptions Dennis S. Cassidy Amisar Kaharoeddin Xinlan Liu Technical ........................................................... 20 SEDIMENT CLASSIFICATION ..................................................... 21 Details

  7. SEDIMENT DESCRIPTIONS R/V POLAR DUKE

    E-Print Network [OSTI]

    #12;#12;SEDIMENT DESCRIPTIONS R/V POLAR DUKE 1991 #12;#12;DESCRIPTIONS OF SEDIMENT RECOVERED Sediment Descriptions Xinlan Liu Technical Assistant Carl Painter Antarctic Marine Geology Research ........................................................... 15 SEDIMENT CLASSIFICATION ..................................................... 16 Pelagic Sediments

  8. Does size matter?

    SciTech Connect (OSTI)

    Carreras, B. A.; Physics Department, College of Natural Science and Mathematics and Geophysical Institute, University of Alaska, Fairbanks, Alaska 99775; Physics Department, Universidad Carlos III de Madrid, Madrid ; Newman, D. E.; Dobson, Ian

    2014-06-15

    Failures of the complex infrastructures society depends on having enormous human and economic cost that poses the question: Are there ways to optimize these systems to reduce the risks of failure? A dynamic model of one such system, the power transmission grid, is used to investigate the risk from failure as a function of the system size. It is found that there appears to be optimal sizes for such networks where the risk of failure is balanced by the benefit given by the size.

  9. Detailed Course Module Description | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Detailed Course Module Description Detailed Course Module Description This document lists the course modules for building science courses offered at Cornell's Collaborator...

  10. Physical Description and Experimental Characterization of the...

    Office of Scientific and Technical Information (OSTI)

    Physical Description and Experimental Characterization of the Resistive Switching Filament. Citation Details In-Document Search Title: Physical Description and Experimental...

  11. Fire Size in Tunnels 

    E-Print Network [OSTI]

    Carvel, Ricky O

    In recent years, a number of high profile accidental fires have occurred in several road and rail tunnels throughout the world. Many of these fires grew rapidly to catastrophic size and claimed many lives. The processes ...

  12. VBGVBG3/7/2006MODIFIED LEAK DETECTOR BRACKET1 2. WELDING & INSPECTIONS SHALL BE PERFORMED

    E-Print Network [OSTI]

    McDonald, Kirk

    VBGVBG3/7/2006MODIFIED LEAK DETECTOR BRACKET1 APPROVED 2. WELDING & INSPECTIONS SHALL BE PERFORMED 4. MATERIAL CERTIFICATIONS REQUIRED 3. ALL WELDS SHALL BE DYE PENETRANT INSPECTED IN ACCORDANCE WITH AWS D.1.6 1 1. ALL WELDS MUST BE WATERTIGHT NOTES BYDATEDESCRIPTIONREV ITEM NO. QTY. DESCRIPTION

  13. The Modified Weighted Slab Technique: Models and Results

    E-Print Network [OSTI]

    Frank C. Jones; Andrew Lukasiak; Vladimir Ptuskin; William Webber

    2000-07-19

    In an attempt to understand the source and propagation of galactic cosmic rays we have employed the Modified Weighted Slab technique along with recent values of the relevant cross sections to compute primary to secondary ratios including B/C and Sub-Fe/Fe for different galactic propagation models. The models that we have considered are the disk-halo diffusion model, the dynamical halo wind model, the turbulent diffusion model and a model with minimal reacceleration. The modified weighted slab technique will be briefly discussed and a more detailed description of the models will be given. We will also discuss the impact that the various models have on the problem of anisotropy at high energy and discuss what properties of a particular model bear on this issue.

  14. CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

    SciTech Connect (OSTI)

    J.F. Beesley

    2005-04-21

    The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.

  15. Relativistic MOND from Modified Energetics

    E-Print Network [OSTI]

    Durmus Ali Demir; Canan Nurhan Karahan

    2014-08-22

    We begin to investigate the question of what modifications in energy-momentum tensor can yield correct MOND regime. As a starting study, we refrain from insisting on an action principle and focus exclusively on the equations of motion. The present work, despite the absence of an explicit action functional, can be regarded to extend Milgrom's modified inertia approach to relativistic domain. Our results show that a proper MOND limit arises if energy-momentum tensor is modified to involve determinant of the metric tensor in reference to the flat metric, where the latter is dynamically generated as in gravitational Higgs mechanism. This modified energy-momentum tensor is conserved in both Newtonian and MONDian regimes.

  16. Relativistic MOND from Modified Energetics

    E-Print Network [OSTI]

    Demir, Durmus Ali

    2014-01-01

    We begin to investigate the question of what modifications in energy-momentum tensor can yield correct MOND regime. As a starting study, we refrain from insisting on an action principle and focus exclusively on the equations of motion. The present work, despite the absence of an explicit action functional, can be regarded to extend Milgrom's modified inertia approach to relativistic domain. Our results show that a proper MOND limit arises if energy-momentum tensor is modified to involve determinant of the metric tensor in reference to the flat metric, where the latter is dynamically generated as in gravitational Higgs mechanism. This modified energy-momentum tensor is conserved in both Newtonian and MONDian regimes.

  17. Library Efficiency Cat. No. 18262-014 Size: 1 ml

    E-Print Network [OSTI]

    Kirschner, Marc W.

    Library Efficiency DH5 Cells Cat. No. 18262-014 Size: 1 ml Store at -70°C. Do not store in liquid nitrogen. Description: Library Efficiency® DH5® Competent Cells have been prepared by a patented amounts of DNA. DH5® is capable of being transformed efficiently with large plasmids, and can also serve

  18. SUMO Protease Cat. No. 12588-018 Size: 250 units

    E-Print Network [OSTI]

    Lebendiker, Mario

    SUMO Protease Cat. No. 12588-018 Size: 250 units Description SUMO Protease, a highly active can be used to cleave SUMO from recombinant fusion proteins. The optimal temperature for cleavage-term storage. Avoid multiple freeze/thaw cycles at -80°C. Store 10X SUMO Protease Buffers at 4°C or -20°C. Part

  19. Modified Acyl-ACP desaturase

    DOE Patents [OSTI]

    Cahoon, E.B.; Shanklin, J.; Lindqvist, Y.; Schneider, G.

    1999-03-30

    Disclosed is a method for modifying the chain length and double bond positional specificities of a soluble plant fatty acid desaturase. More specifically, the method involves modifying amino acid contact residues in the substrate binding channel of the soluble fatty acid desaturase which contact the fatty acid. Specifically disclosed is the modification of an acyl-ACP desaturase. Amino acid contact residues which lie within the substrate binding channel are identified, and subsequently replaced with different residues to effect the modification of activity. 2 figs.

  20. RF test bench automation Description

    E-Print Network [OSTI]

    Dobigeon, Nicolas

    RF test bench automation Description: Callisto would like to implement automated RF test bench. Three RF test benches have to be studied and automated: LNA noise temperature test bench LNA gain phase of the test benches and an implementation of the automation phase. Tasks: Noise temperature

  1. December 3, 2014 Position Description

    E-Print Network [OSTI]

    Das, Suman

    in the pulp and paper industry. A Bachelor's Degree, preferably in Engineering or a technical field; project1 December 3, 2014 Position Description Job Title: Pulp & Paper Energy Efficiency Specialist FLSA: This candidate will be responsible for deploying industrial energy efficiency Best Practices in the pulp

  2. Real Estate Development Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    Real Estate Development Company Description: The largest specialty family footwear retailer America, the Caribbean and South America. Short Project Name: Competitive Analysis - Real Estate Positions to assist them in making recommendations for how our company should develop its real estate strategy

  3. Sustainable Internet Architecture PROJECT DESCRIPTION

    E-Print Network [OSTI]

    Kuzmanovic, Aleksandar

    Sustainable Internet Architecture PROJECT DESCRIPTION 1 Introduction The Internet currently plays of challenges. Numerous research studies on a new Internet architecture (e.g., [16, 37, 48, 54, 55]) have on both the new Internet architecture itself and the underlying problems that motivate it. We look

  4. Syllabus PHYS 441 Course Description

    E-Print Network [OSTI]

    Lathrop, Daniel P.

    Syllabus PHYS 441 Course Description A survey of concepts in particle and nuclear physics. We of the nucleus and the foundation of modern nuclear and particle physics. 2. Nuclear Phenomenology: Properties will learn about particles and forces that make up this universe, modern theories about these forces

  5. Cosmological Hints of Modified Gravity ?

    E-Print Network [OSTI]

    Eleonora Di Valentino; Alessandro Melchiorri; Joseph Silk

    2015-09-24

    The recent measurements of Cosmic Microwave Background temperature and polarization anisotropies made by the Planck satellite have provided impressive confirmation of the $\\Lambda$CDM cosmological model. However interesting hints of slight deviations from $\\Lambda$CDM have been found, including a $95 \\%$ c.l. preference for a "modified gravity" structure formation scenario. In this paper we confirm the preference for a modified gravity scenario from Planck 2015 data, find that modified gravity solves the so-called $A_{lens}$ anomaly in the CMB angular spectrum, and constrains the amplitude of matter density fluctuations to $\\sigma_8=0.815_{-0.048}^{+0.032}$, in better agreement with weak lensing constraints. Moreover, we find a lower value for the reionization optical depth of $\\tau=0.059\\pm0.020$ (to be compared with the value of $\\tau= 0.079 \\pm 0.017$ obtained in the standard scenario), more consistent with recent optical and UV data. We check the stability of this result by considering possible degeneracies with other parameters, including the neutrino effective number, the running of the spectral index and the amount of primordial helium. The indication for modified gravity is still present at about $95\\%$ c.l., and could become more significant if lower values of $\\tau$ were to be further confirmed by future cosmological and astrophysical data.

  6. Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent BondingMeeting | Department|DepartmentalDayWhen

  7. Aerosol mobility size spectrometer

    DOE Patents [OSTI]

    Wang, Jian (Port Jefferson, NY); Kulkarni, Pramod (Port Jefferson Station, NY)

    2007-11-20

    A device for measuring aerosol size distribution within a sample containing aerosol particles. The device generally includes a spectrometer housing defining an interior chamber and a camera for recording aerosol size streams exiting the chamber. The housing includes an inlet for introducing a flow medium into the chamber in a flow direction, an aerosol injection port adjacent the inlet for introducing a charged aerosol sample into the chamber, a separation section for applying an electric field to the aerosol sample across the flow direction and an outlet opposite the inlet. In the separation section, the aerosol sample becomes entrained in the flow medium and the aerosol particles within the aerosol sample are separated by size into a plurality of aerosol flow streams under the influence of the electric field. The camera is disposed adjacent the housing outlet for optically detecting a relative position of at least one aerosol flow stream exiting the outlet and for optically detecting the number of aerosol particles within the at least one aerosol flow stream.

  8. Cosmological Hints of Modified Gravity ?

    E-Print Network [OSTI]

    Di Valentino, Eleonora; Silk, Joseph

    2015-01-01

    The recent measurements of Cosmic Microwave Background temperature and polarization anisotropies made by the Planck satellite have provided impressive confirmation of the $\\Lambda$CDM cosmological model. However interesting hints of slight deviations from $\\Lambda$CDM have been found, including a $95 \\%$ c.l. preference for a "modified gravity" structure formation scenario. In this paper we confirm the preference for a modified gravity scenario from Planck 2015 data, find that modified gravity solves the so-called $A_{lens}$ anomaly in the CMB angular spectrum, and constrains the amplitude of matter density fluctuations to $\\sigma_8=0.815_{-0.048}^{+0.032}$, in better agreement with weak lensing constraints. Moreover, we find a lower value for the reionization optical depth of $\\tau=0.059\\pm0.020$ (to be compared with the value of $\\tau= 0.079 \\pm 0.017$ obtained in the standard scenario), more consistent with recent optical and UV data. We check the stability of this result by considering possible degeneraci...

  9. Considerations for the use of the modified line reversal technique for gas temperature measurement

    SciTech Connect (OSTI)

    Winkleman, B.C.

    1993-06-01

    Several areas related to the successful and accurate application of modified line reversal are discussed. Initially, generalized modified line reversal equations are developed. A review of basic line reversal theory is presented followed by development of correction factors for optical system effects. Image size and their effect on accurate determinations of spectral radiances is discussed. Temperature biases introduced by image vignetting is calculated. Measured image irradiances are given.

  10. University of Memphis University Libraries -Position Description

    E-Print Network [OSTI]

    Dasgupta, Dipankar

    the needs of library users and library personnel. The Emerging Technologies Librarian is a memberUniversity of Memphis University Libraries - Position Description Description Updated: November 2012 1 I. DEPARTMENT: University Libraries ­ Library Information Systems II. POSITION: Emerging

  11. OPERATING INSTRUCTIONS AND SYSTEM DESCRIPTION FOR THE

    E-Print Network [OSTI]

    OPERATING INSTRUCTIONS AND SYSTEM DESCRIPTION FOR THE ACl-01 AUTOMATIC APPARATUS FOR CHLORINATING. The system is batteries operated and has an auto power off function. The ACl-01 system is housed in a small................................................................................................................. 2 2. General System Description

  12. Edison Job Size Charts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HABFES Science Network RequirementsEdison ElectrifiesJob Size Charts

  13. SEDIMENT DESCRIPTIONS R/V POLAR DUKE

    E-Print Network [OSTI]

    #12;#12;SEDIMENT DESCRIPTIONS R/V POLAR DUKE CRUISES II & VII, 1990 #12;#12;DESCRIPTIONS OF SEDIMENT RECOVERED BY THE R/V POLAR DUKE, CRUISES II & VII UNITED STATES ANTARCTIC PROGRAM 1990 Edited by Steven A. Hovan and Thomas R. Janecek Sediment Descriptions Xinlan Liu Technical Assistant Carl Painter

  14. SEDIMENT DESCRIPTIONS R/V POLAR DUKE

    E-Print Network [OSTI]

    #12;#12;SEDIMENT DESCRIPTIONS for R/V POLAR DUKE CRUISE II, 1992 to the ANTARCTIC PENINSULA #12;#12;DESCRIPTIONS OF SEDIMENT RECOVERED BY THE R/V POLAR DUKE, UNITED STATES ANTARCTIC PROGRAM CRUISE II, 1992 TO THE ANTARCTIC PENINSULA Edited by Thomas R. Janecek Sediment Descriptions* Matthew Curren (Antarctic Marine

  15. SCIENCE AT THE CROSSROADS Genetically Modified Foods

    E-Print Network [OSTI]

    Newman, Stuart A.

    SCIENCE AT THE CROSSROADS Genetically Modified Foods and the Attack on Nature Stuart A. NewmanBy:[Newman,StuartA.]At:16:493July2009 #12;about, genetically modified (GM) food as scientifically ignorant, economically and Arpad Pusztai, ``Effect of Diets Containing Genetically Modified Potatoes Expressing galanthus nivalis

  16. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    SciTech Connect (OSTI)

    S. Roy

    2004-06-24

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

  17. ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT

    SciTech Connect (OSTI)

    M. Maniyar

    2004-06-22

    The purpose of this revision of the System Description Document (SDD) is to establish requirements that drive the design of the electrical power system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience are design engineers. This type of SDD leads and follows the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. This SDD follows the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to this system are obtained from ''Project Functional and Operational Requirements'' (F&OR) (Siddoway, 2003). Other requirements to support the design process have been taken from higher level requirements documents such as ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), the fire hazards analyses, and the preclosure safety analysis. The above mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canori and Leitner 2003) requirements. This SDD includes several appendices with supporting information. Appendix B lists key system charts, diagrams, drawings, and lists; and Appendix C is a list of system procedures.

  18. SNF AGING SYSTEM DESCRIPTION DOCUMENT

    SciTech Connect (OSTI)

    L.L. Swanson

    2005-04-06

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts, diagrams, drawings, lists and additional supporting information; and Appendix C is a list of procedures that will be used to operate the system.

  19. Descriptive Model of Generic WAMS

    SciTech Connect (OSTI)

    Hauer, John F.; DeSteese, John G.

    2007-06-01

    The Department of Energy’s (DOE) Transmission Reliability Program is supporting the research, deployment, and demonstration of various wide area measurement system (WAMS) technologies to enhance the reliability of the Nation’s electrical power grid. Pacific Northwest National Laboratory (PNNL) was tasked by the DOE National SCADA Test Bed Program to conduct a study of WAMS security. This report represents achievement of the milestone to develop a generic WAMS model description that will provide a basis for the security analysis planned in the next phase of this study.

  20. Adhesives from modified soy protein

    DOE Patents [OSTI]

    Sun, Susan (Manhattan, KS); Wang, Donghai (Manhattan, KS); Zhong, Zhikai (Manhattan, KS); Yang, Guang (Shanghai, CN)

    2008-08-26

    The, present invention provides useful adhesive compositions having similar adhesive properties to conventional UF and PPF resins. The compositions generally include a protein portion and modifying ingredient portion selected from the group consisting of carboxyl-containing compounds, aldehyde-containing compounds, epoxy group-containing compounds, and mixtures thereof. The composition is preferably prepared at a pH level at or near the isoelectric point of the protein. In other preferred forms, the adhesive composition includes a protein portion and a carboxyl-containing group portion.

  1. Energy Conditions in $f(G)$ Modified Gravity with Non-minimal Coupling to Matter

    E-Print Network [OSTI]

    A. Banijamali; B. Fazlpour; M. R. Setare

    2011-11-15

    In this paper we study a model of modified gravity with non-minimal coupling between a general function of the Gauss-Bonnet invariant, $f(G)$, and matter Lagrangian from the point of view of the energy conditions. Such model has been introduced in Ref. [21] for description of early inflation and late-time cosmic acceleration. We present the suitable energy conditions for the above mentioned model and then, we use the estimated values of the Hubble, deceleration and jerk parameters to apply the obtained energy conditions to the specific class of modified Gauss-Bonnet models.

  2. PROJECT W-551 INTERIM PRETREATMENT SYSTEM PRECONCEPTUAL CANDIDATE TECHNOLOGY DESCRIPTIONS

    SciTech Connect (OSTI)

    MAY TH

    2008-08-12

    The Office of River Protection (ORP) has authorized a study to recommend and select options for interim pretreatment of tank waste and support Waste Treatment Plant (WTP) low activity waste (LAW) operations prior to startup of all the WTP facilities. The Interim Pretreatment System (IPS) is to be a moderately sized system which separates entrained solids and 137Cs from tank waste for an interim time period while WTP high level waste vitrification and pretreatment facilities are completed. This study's objective is to prepare pre-conceptual technology descriptions that expand the technical detail for selected solid and cesium separation technologies. This revision includes information on additional feed tanks.

  3. Modified SIMD architecture suitable for single-chip implementation

    E-Print Network [OSTI]

    Junichiro Makino

    2005-09-11

    We describe a modified SIMD architecture suitable for single-chip integration of a large number of processing elements, such as 1,000 or more. Important differences from traditional SIMD designs are: a) The size of the memory per processing elements is kept small. b) The processors are organized into groups, each with a small buffer memory. Reduction operation over the groups is done in hardware. The first change allows us to integrate a very large number of processing elements into a single chip. The second change allows us to achieve a close-to-peak performance for many scientific applications like particle-based simulations and dense-matrix operations.

  4. Hardware Sizing for Software Application

    E-Print Network [OSTI]

    Swaminathan, Ganesh

    2009-05-15

    Hardware sizing is an approximation of the hardware resources required to support a software implementation. Just like any theoretical model, hardware sizing model is an approximation of the reality. Depending on the infrastructure needs, workload...

  5. AHTR Refueling Systems and Process Description

    SciTech Connect (OSTI)

    Varma, V.K.; Holcomb, D.E.; Bradley, E.C.; Zaharia, N.M.; Cooper, E.J.

    2012-07-15

    The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt–cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy’s Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published [1], and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the levels of maturity of the various SSCs to provide guidance for future technology developments. The conceptual design information presented in this report is very preliminary in nature. Significant uncertainty remains about several aspects of the process and even the radiation and mechanical performance of plate-type coated-particle fuel.

  6. AHTR Refueling Systems and Process Description

    SciTech Connect (OSTI)

    Varma, Venugopal Koikal; Holcomb, David Eugene; Bradley, Eric Craig; Zaharia, Nathaniel M; Cooper, Eliott J

    2012-07-01

    The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt-cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy's Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the levels of maturity of the various SSCs to provide guidance for future technology developments. The conceptual design information presented in this report is very preliminary in nature. Significant uncertainty remains about several aspects of the process and even the radiation and mechanical performance of plate-type coated-particle fuel.

  7. SUMMARY OF 2009 RHEOLOGY MODIFIER PROGRAM

    SciTech Connect (OSTI)

    Hansen, E.

    2009-12-08

    The overall objective of the EM-31 Rheological Modifiers and Wetting Agents program is to utilize commercially available rheology modifiers to increase the solids fraction of radioactive sludge based waste streams, resulting in an increase in throughput and decreasing the overall processing time. The program first investigates the impact of rheology modifiers on slurry simulants and then utilizes the most effective rheology modifiers on radioactive slurries. The work presented in this document covers the initial investigation of rheology modifier testing with simulants. This task is supported by both the Savannah River National Laboratory (SRNL) and Pacific Northwest National Laboratory (PNNL). The SRNL EM-31 task, for this year, was to investigate the use of rheology modifiers on simulant Defense Waste Processing Facility (DWPF) melter feeds. The task is to determine, based on the impact of the rheology modifier, if there are rheology modifiers that could reduce the water content of the slurry going to the DWPF melter, hence increasing the melt rate by decreasing the water loading. The rheology modifier in essence would allow a higher solids content slurry to have the same type of rheology or pumpability of a lower solids slurry. The modifiers selected in this report were determined based on previous modifiers used in high level waste melter feed simulants, on-going testing performed by counterparts at PNNL, and experiences gain through use of modifiers in other Department of Energy (DOE) processes such as grout processing. There were 12 rheology modifiers selected for testing, covering both organic and inorganic types and they were tested at four different concentrations for a given melter feed. Five different DWPF melter feeds were available and there was adequate material in one of the melter feeds to increase the solids concentration, resulting in a total of six simulants for testing. The mass of melter feed available in each simulant was not adequate for testing each rheology modifier, hence based on the changes in rheology for a given rheology modifier, rheology modifiers were either dropped or added between simulants. Three rheology modifiers were used on all simulants. The results from this testing indicate that citric acid or polycarboxylate based rheology modifiers are the most effective in reducing the yield stress, by as much as 70% at the higher rheology modifier additions and were effective on most of the tested simulants. These rheology modifiers are organic, hence the can also be used as reductants in melter operations. The most effective non-organic rheology modifiers, sodium metasilicate reduced the yield stress by 10%. It is recommended that both citric acid and commercially available polycarboxylate rheology modifiers be further investigated. Different molecular weight polycarboxylates and different types of polycarboxylates used in other industries must be considered. These polycarboxylates are extensively utilized in the cement, ceramic, and water treatment processes, hence readily available. Future work on DWPF melter feeds involving rheology modifiers should include, assuming the present method of processing sludge through DPWF does not change, is: (1) Investigate the use of polycarboxylate in various processes and procure polycarboxylates for testing. Limit rheology modifier selection and future testing between four and eight different types. (2) Test rheology modifiers on at least two different chemical types or bounding DWPF SME product simulants. Test to include the impact of boiling and the effectiveness in reducing water content via rheology versus weight percent curves. (3) Based on selected modifiers, perform testing on actual radioactive melter feed based on results from simulant testing.

  8. The tropical double description method

    E-Print Network [OSTI]

    Allamigeon, Xavier; Goubault, Eric

    2010-01-01

    We develop a tropical analogue of the classical double description method allowing one to compute an internal representation (in terms of vertices) of a polyhedron defined externally (by inequalities). The heart of the tropical algorithm is a characterization of the extreme points of a polyhedron in terms of a system of constraints which define it. We show that checking the extremality of a point reduces to checking whether there is only one minimal strongly connected component in an hypergraph. The latter problem can be solved in almost linear time, which allows us to eliminate quickly redundant generators. We report extensive tests (including benchmarks from an application to static analysis) showing that the method outperforms experimentally the previous ones by orders of magnitude. The present tools also lead to worst case bounds which improve the ones provided by previous methods.

  9. Botanical Name Qty Common Name Description Price Size Abutilon 'Dwarf Red' 20 flowering maple

    E-Print Network [OSTI]

    Pasternack, Gregory B.

    flowering maple 18" x 24"; evergreen. Orange-red bell-shaped flowers most of the year, attract hummingbirds. Frost-tender. $11.00 1G S B4 Abutilon 'Painted Bells' 16 gold and orange rose flowering maple to 6, showy globes of purple flowers with a metallic sheen in early summer. $7.50 4" BU, + B6 Aloe 'Caitlin' 5

  10. Fusion-fission reactions with modified Woods-Saxon potential

    E-Print Network [OSTI]

    Ning Wang; Kai Zhao; Werner Scheid; Xizhen Wu

    2007-12-15

    A modified Woods-Saxon potential model is proposed for a unified description of the entrance channel fusion barrier and the fission barrier of fusion-fission reactions based on the Skyrme energy-density functional approach. The fusion excitation functions of 120 reactions have been systematically studied. The fusion (capture) cross sections are well described with the calculated potential and an empirical barrier distribution. Incorporating a statistical model (HIVAP code) for describing the decay of the compound nucleus, the evaporation residue (and fission) cross sections of 51 fusion-fission reactions have been systematically investigated. Optimal values of some key parameters of the HIVAP code are obtained based on the experimental data of these reactions. The experimental data are reasonably well reproduced by the calculated results. The upper and lower confidence limits of the systematic errors of the calculated results are given.

  11. CONSIDERATIONS ON A THEORY OF DESCRIPTIVE ACTIVITY

    E-Print Network [OSTI]

    Gubrium, Jaber F.; Buckholdt, David R.; Lynott, Robert

    1982-04-01

    OF DESCRIPTIVE ACTIVITY Jaber F. Gubrium Marquette University David R. Buckholdt Marquette University Robert]. Lynott Loyola University Mid-American Review of Sociology, 1982, Vol. VII, No.1 :17-35 From a working definition of description, the meaning... science as well as the variety of formal organizations whose members are obliged to describe people in some way. Among the latter organizations is the full range of human service insti­ tutions where people-descriptions are evaluated both internally...

  12. Impedance operator description of a meta--surface with electric and magnetic dipoles

    E-Print Network [OSTI]

    Didier Felbacq

    2015-07-28

    A meta-surface made of a collection of nano-resonators characterized an electric dipole and a magnetic dipole was studied in the regime where the wavelength is large with respect to the size of the resonators. An effective description in terms of an impedance operator was derived.

  13. Machinist Pipeline/Apprentice Program Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Machinist PipelineApprentice Program Program Description The Machinist Pipeline Program was created by the Prototype Fabrication Division to fill a critical need for skilled...

  14. Investigation and Analytical Description of Acoustic Production...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Investigation and Analytical Description of Acoustic Production by Magneto-Acoustic Mixing Technology Citation Details In-Document Search This content will become...

  15. Subsurface Facility System Description Document

    SciTech Connect (OSTI)

    Eric Loros

    2001-07-31

    The Subsurface Facility System encompasses the location, arrangement, size, and spacing of the underground openings. This subsurface system includes accesses, alcoves, and drifts. This system provides access to the underground, provides for the emplacement of waste packages, provides openings to allow safe and secure work conditions, and interfaces with the natural barrier. This system includes what is now the Exploratory Studies Facility. The Subsurface Facility System physical location and general arrangement help support the long-term waste isolation objectives of the repository. The Subsurface Facility System locates the repository openings away from main traces of major faults, away from exposure to erosion, above the probable maximum flood elevation, and above the water table. The general arrangement, size, and spacing of the emplacement drifts support disposal of the entire inventory of waste packages based on the emplacement strategy. The Subsurface Facility System provides access ramps to safely facilitate development and emplacement operations. The Subsurface Facility System supports the development and emplacement operations by providing subsurface space for such systems as ventilation, utilities, safety, monitoring, and transportation.

  16. Content of system design descriptions

    SciTech Connect (OSTI)

    NONE

    1998-10-01

    A System Design Description (SDD) describes the requirements and features of a system. This standard provides guidance on the expected technical content of SDDs. The need for such a standard was recognized during efforts to develop SDDs for safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Existing guidance related to the corresponding documents in other industries is generally not suitable to meet the needs of DOE nuclear facilities. Across the DOE complex, different contractors have guidance documents, but they vary widely from site to site. While such guidance documents are valuable, no single guidance document has all the attributes that DOE considers important, including a reasonable degree of consistency or standardization. This standard is a consolidation of the best of the existing guidance. This standard has been developed with a technical content and level of detail intended to be most applicable to safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Notwithstanding that primary intent, this standard is recommended for other systems at such facilities, especially those that are important to achieving the programmatic mission of the facility. In addition, application of this standard should be considered for systems at other facilities, including non-nuclear facilities, on the basis that SDDs may be beneficial and cost-effective.

  17. Modified Entropic Gravitation in Superconductors

    E-Print Network [OSTI]

    Clovis Jacinto de Matos

    2011-08-19

    Verlinde recently developed a theoretical account of gravitation in terms of an entropic force. The central element in Verlinde's derivation is information and its relation with entropy through the holographic principle. The application of this approach to the case of superconductors requires to take into account that information associated with superconductor's quantum vacuum energy is not stored on Planck size surface elements, but in four volume cells with Planck-Einstein size. This has profound consequences on the type of gravitational force generated by the quantum vacuum condensate in superconductors, which is closely related with the cosmological repulsive acceleration responsible for the accelerated expansion of the Universe. Remarkably this new gravitational type force depends on the level of breaking of the weak equivalence principle for cooper pairs in a given superconducting material, which was previously derived by the author starting from similar principles. It is also shown that this new gravitational force can be interpreted as a surface force. The experimental detection of this new repulsive gravitational-type force appears to be challenging.

  18. Nonderivative modified gravity: a classification

    SciTech Connect (OSTI)

    Comelli, D.; Nesti, F.; Pilo, L. E-mail: fabrizio.nesti@irb.hr

    2014-11-01

    We analyze the theories of gravity modified by a generic nonderivative potential built from the metric, under the minimal requirement of unbroken spatial rotations. Using the canonical analysis, we classify the potentials V according to the number of degrees of freedom (DoF) that propagate at the nonperturbative level. We then compare the nonperturbative results with the perturbative DoF propagating around Minkowski and FRW backgrounds. A generic V implies 6 propagating DoF at the non-perturbative level, with a ghost on Minkowski background. There exist potentials which propagate 5 DoF, as already studied in previous works. Here, no V with unbroken rotational invariance admitting 4 DoF is found. Theories with 3 DoF turn out to be strongly coupled on Minkowski background. Finally, potentials with only the 2 DoF of a massive graviton exist. Their effect on cosmology is simply equivalent to a cosmological constant. Potentials with 2 or 5 DoF and explicit time dependence appear to be a further viable possibility.

  19. Galaxy Clustering in 3D and Modified Gravity Theories

    E-Print Network [OSTI]

    Dipak Munshi; Geraint Pratten; Patrick Valageas; Peter Coles; Philippe Brax

    2015-08-03

    We study Modified Gravity (MG) theories by modelling the redshifted matter power spectrum in a spherical Fourier-Bessel (sFB) basis. We use a fully non-linear description of the real-space matter power-spectrum and include the lowest-order redshift-space correction (Kaiser effect), taking into account some additional non-linear contributions. Ignoring relativistic corrections, which are not expected to play an important role for a shallow survey, we analyse two different modified gravity scenarios, namely the generalised Dilaton scalar-tensor theories and the $f({R})$ models in the large curvature regime. We compute the 3D power spectrum ${\\cal C}^s_{\\ell}(k_1,k_2)$ for various such MG theories with and without redshift space distortions, assuming precise knowledge of background cosmological parameters. Using an all-sky spectroscopic survey with Gaussian selection function $\\varphi(r)\\propto \\exp(-{r^2 / r^2_0})$, $r_0 = 150 \\, h^{-1} \\, {\\textrm{Mpc}}$, and number density of galaxies $\\bar {\\textrm{N}} =10^{-4}\\;{\\textrm{Mpc}}^{-3}$, we use a $\\chi^2$ analysis, and find that the lower-order $(\\ell \\leq 25)$ multipoles of ${\\cal C}^s_\\ell(k,k')$ (with radial modes restricted to $k 25$ modes can further reduce the error bars and thus in principle make cosmological gravity constraints competitive with solar system tests. However this will require an accurate modelling of non-linear redshift space distortions. Using a tomographic $\\beta(a)$-$m(a)$ parameterization we also derive constraints on specific parameters describing the Dilaton models of modified gravity.

  20. University of Memphis University Libraries Position Description

    E-Print Network [OSTI]

    Dasgupta, Dipankar

    . CLASSIFICATION: Faculty IV. NAME OF INCUMBENT: Vacant V. POSITION No.: 2260 VI. JOB PURPOSE: This position/her responsibilities focus on removing barriers to information that are created when the library user needs informationUniversity of Memphis University Libraries Position Description Description last updated: August

  1. University of Memphis University Libraries -Position Description

    E-Print Network [OSTI]

    Dasgupta, Dipankar

    1 I. DEPARTMENT: University Libraries II. POSITION: ILS Librarian III. CLASSIFICATION: Faculty IV strategies to maximize the effective use of the various components of the ILMS to meet the needs of libraryUniversity of Memphis University Libraries - Position Description Description Updated: August 2010

  2. WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED,

    E-Print Network [OSTI]

    reflect avoided waste disposal costs and lower material purchase costs ($6000) Hydraulic Oil ProductWASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED, REUSED, RECYCLED OR CONSERVED IN 2002 WASTE TYPE DESCRIPTION DETAILS * Electrophoretic Mini-Gels Microscale Chemical Use 2,200 Hazardous Waste - Lab Pack $10

  3. Multiple description coding by successive quantization

    E-Print Network [OSTI]

    Linder, Tamás

    is with the Department of Electrical and Computer Engi- neering, University of Toronto, Toronto, Ontario M5S 3G4, Canada for transmission over a diversity communication system with several channels. In this technique, the source-description quantization problem, source samples are quantized into two descriptions with rates R1 and R2, respectively

  4. Nanoparticles modified with multiple organic acids

    DOE Patents [OSTI]

    Cook, Ronald Lee (Lakewood, CO); Luebben, Silvia DeVito (Golden, CO); Myers, Andrew William (Arvada, CO); Smith, Bryan Matthew (Boulder, CO); Elliott, Brian John (Superior, CO); Kreutzer, Cory (Brighton, CO); Wilson, Carolina (Arvada, CO); Meiser, Manfred (Aurora, CO)

    2007-07-17

    Surface-modified nanoparticles of boehmite, and methods for preparing the same. Aluminum oxyhydroxide nanoparticles are surface modified by reaction with selected amounts of organic acids. In particular, the nanoparticle surface is modified by reactions with two or more different carboxylic acids, at least one of which is an organic carboxylic acid. The product is a surface modified boehmite nanoparticle that has an inorganic aluminum oxyhydroxide core, or part aluminum oxyhydroxide core and a surface-bonded organic shell. Organic carboxylic acids of this invention contain at least one carboxylic acid group and one carbon-hydrogen bond. One embodiment of this invention provides boehmite nanoparticles that have been surface modified with two or more acids one of which additional carries at least one reactive functional group. Another embodiment of this invention provides boehmite nanoparticles that have been surface modified with multiple acids one of which has molecular weight or average molecular weight greater than or equal to 500 Daltons. Yet, another embodiment of this invention provides boehmite nanoparticles that are surface modified with two or more acids one of which is hydrophobic in nature and has solubility in water of less than 15 by weight. The products of the methods of this invention have specific useful properties when used in mixture with liquids, as filler in solids, or as stand-alone entities.

  5. Does semantic size affect size constancy scaling using lexical stimuli? 

    E-Print Network [OSTI]

    Beveridge, Madeleine

    2010-11-24

    Binocular disparity allows us to perceive the world in 3-dimensions through the process of stereopsis. In this study, we used binocular disparity to induce the size constancy illusion in lexical stimuli. 47 undergraduate ...

  6. Review Of Rheology Modifiers For Hanford Waste

    SciTech Connect (OSTI)

    Pareizs, J. M.

    2013-09-30

    As part of Savannah River National Laboratory (SRNL)'s strategic development scope for the Department of Energy - Office of River Protection (DOE-ORP) Hanford Tank Waste Treatment and Immobilization Plant (WTP) waste feed acceptance and product qualification scope, the SRNL has been requested to recommend candidate rheology modifiers to be evaluated to adjust slurry properties in the Hanford Tank Farm. SRNL has performed extensive testing of rheology modifiers for use with Defense Waste Processing Facility (DWPF) simulated melter feed - a high undissolved solids (UDS) mixture of simulated Savannah River Site (SRS) Tank Farm sludge, nitric and formic acids, and glass frit. A much smaller set of evaluations with Hanford simulated waste have also been completed. This report summarizes past work and recommends modifiers for further evaluation with Hanford simulated wastes followed by verification with actual waste samples. Based on the review of available data, a few compounds/systems appear to hold the most promise. For all types of evaluated simulated wastes (caustic Handford tank waste and DWPF processing samples with pH ranging from slightly acidic to slightly caustic), polyacrylic acid had positive impacts on rheology. Citric acid also showed improvement in yield stress on a wide variety of samples. It is recommended that both polyacrylic acid and citric acid be further evaluated as rheology modifiers for Hanford waste. These materials are weak organic acids with the following potential issues: The acidic nature of the modifiers may impact waste pH, if added in very large doses. If pH is significantly reduced by the modifier addition, dissolution of UDS and increased corrosion of tanks, piping, pumps, and other process equipment could occur. Smaller shifts in pH could reduce aluminum solubility, which would be expected to increase the yield stress of the sludge. Therefore, it is expected that use of an acidic modifier would be limited to concentrations that do not appreciably change the pH of the waste; Organics are typically reductants and could impact glass REDOX if not accounted for in the reductant addition calculations; Stability of the modifiers in a caustic, radioactive environment is not known, but some of the modifiers tested were specifically designed to withstand caustic conditions; These acids will add to the total organic carbon content of the wastes. Radiolytic decomposition of the acids could result in organic and hydrogen gas generation. These potential impacts must be addressed in future studies with simulants representative of real waste and finally with tests using actual waste based on the rheology differences seen between SRS simulants and actual waste. The only non-organic modifier evaluated was sodium metasilicate. Further evaluation of this modifier is recommended if a reducing modifier is a concern.

  7. University of Memphis University Libraries Position Description

    E-Print Network [OSTI]

    Dasgupta, Dipankar

    III. CLASSIFICATION: LIBRARY ASSISTANT III IV. NAME OF INCUMBENT: Vacant V. POSITION NO.: 1259 VI. JOBUniversity of Memphis University Libraries Position Description 1 I. DEPARTMENT: University Libraries: Collection Management, ILL & Document Delivery II. POSITION: Interlibrary Loan Library Assistant

  8. METEOROLOGY 163: Meteorological Instrumentation Course Description

    E-Print Network [OSTI]

    Clements, Craig

    1 METEOROLOGY 163: Meteorological Instrumentation Course Description In this course students will learn different measurement techniques and the instrumentation used in the atmospheric sciences to the techniques of instrument calibration, deployment, and data acquisition. Students will become familiar

  9. ECGR3142 Electromagnetic Devices Course Description

    E-Print Network [OSTI]

    Nasipuri, Asis

    in transformers and electrical machines; Generation of induced voltages; Electromechanical torque development, measurements of transformer parameters, transformer parameters. Basic principles of electric machines: forcesECGR3142 Electromagnetic Devices Course Description Principles of operation and basic design

  10. Embedding Hardware Description Languages in Proof Systems 

    E-Print Network [OSTI]

    Goossens, Kees G W

    The aim of this thesis is to investigate the integration of hardware description lamguaages (HDLs) and automated proof systems. Simulation of circuit designs written in an HDL is an important method of testing their ...

  11. Creation of Computer Animation from Story Descriptions

    E-Print Network [OSTI]

    Kahn, Kenneth Michael

    1979-08-01

    This report describes a computer system that creates simple computer animation in response to high-level, vague, and incomplete descriptions of films. It makes its films by collecting and evaluating suggestions from ...

  12. Poplar trees could be genetically modified to

    E-Print Network [OSTI]

    for bioethanol production Flickr/Robert Crum OPINIONS Are new biofuels the ethical answer? Joyce Tait and Banji-modified poplar tree that is a more accessible source of cellulose for bioethanol production. And the emerging

  13. Test particle motion in modified gravity theories

    E-Print Network [OSTI]

    Mahmood Roshan

    2013-02-05

    We derive the equations of motion of an electrically neutral test particle for modified gravity theories in which the covariant divergence of the ordinary matter energy-momentum tensor dose not vanish (i.e. $\

  14. Electrochemical apparatus comprising modified disposable rectangular...

    Office of Scientific and Technical Information (OSTI)

    include more than one cuvette, which in practice is a disposable rectangular glass or plastic cuvette modified by drilling the hole(s) through. The apparatus include two plates...

  15. Modified Fourier expansions: theory, construction and applications

    E-Print Network [OSTI]

    Adcock, Ben

    2010-10-12

    , such savings in computational cost impart benefits over more commonly used polynomial-based methods. Moreover, regardless of the dimensionality of the problem, modified Fourier methods lead to well-conditioned matrices and corresponding linear systems that can...

  16. Lithium modified zeolite synthesis for conversion of biodiesel-derived glycerol to polyglycerol

    SciTech Connect (OSTI)

    Ayoub, Muhammad, E-mail: muhammad.ayoub@petronas.com.my [Department of Chemical Engineering, Universiti Teknologi PETRONAS, 31750, Tronoh, Perak, Malaysia and School of Chemical Engineering, Universiti Sains Malaysia, 43000, Pinang (Malaysia); Abdullah, Ahmad Zuhairi, E-mail: chzuhairi@usm.my [School of Chemical Engineering, Universiti Sains Malaysia, 43000, Pinang (Malaysia); Inayat, Abrar, E-mail: abrar.inayat@petronas.com.my [Department of Chemical Engineering, Universiti Teknologi PETRONAS, 31750, Tronoh, Perak (Malaysia)

    2014-10-24

    Basic zeolite has received significant attention in the catalysis community. These zeolites modified with alkaline are the potential replacement for existing zeolite catalysts due to its unique features with added advantages. The present paper covers the preparation of lithium modified zeolite Y (Li-ZeY) and its activity for solvent free conversion of biodiesel-derived glycerol to polyglycerol via etherification process. The modified zeolite was well characterized by X-ray diffraction (XRD), Scanning Electron Microscope (SEM) and Nitrogen Adsorption. The SEM images showed that there was no change in morphology of modified zeolite structure after lithium modification. XRD patterns showed that the structure of zeolite was sustained after lithium modification. The surface properties of parent and modified zeolite was also observed N{sub 2} adsortion-desorption technique and found some changes in surface area and pore size. In addition, the basic strength of prepared materials was measured by Hammet indicators and found that basic strength of Li-ZeY was highly improved. This modified zeolite was found highly thermal stable and active heterogamous basic catalyst for conversion of solvent free glycerol to polyglycerol. This reaction was conducted at different temperatures and 260 °C was found most active temperature for this process for reaction time from 6 to 12 h over this basic catalyst in the absence of solvent.

  17. Alternative descriptions and bipartite compound quantum systems

    E-Print Network [OSTI]

    G. Scolarici; L. Solombrino

    2008-11-10

    We analyze some features of alternative Hermitian and quasi-Hermitian quantum descriptions of simple and bipartite compound systems. We show that alternative descriptions of two interacting subsystems are possible if and only if the metric operator of the compound system can be obtained as tensor product of positive operators on component spaces. Some examples also show that such property could be strictly connected with symmetry properties of the non-Hermitian Hamiltonian.

  18. Children's Clothes - Size and Selection. 

    E-Print Network [OSTI]

    Vanderpoorten, Ann; Kerbel, Claudia

    1980-01-01

    , children's clothing should fit well, allow for growth and be durable and easy to care for. Children's Sizes The age of a child does not determine size. Chil dren of the same age may vary greatly in height, weight and body measurements. Clothing... and pants provide room for growth. Durability Because growing children are active and vigorous in play, select clothing that will withstand stress and strain. Clothing that wears out or falls apart before the child outgrows it is frustrating as well...

  19. SEDIMENT DESCRIPTIONS R/V NATHANIEL B. PALMER

    E-Print Network [OSTI]

    SEDIMENT DESCRIPTIONS for R/V NATHANIEL B. PALMER Cruise 1, 1996 #12;DESCRIPTIONS OF SEDIMENT. Janecek and Steven B. Petrushak Sediment Descriptions Florida State University Matthew G. Curren Antarctic...............................................................................................12 SEDIMENT CLASSIFICATION

  20. Intro Probability Rabbits Description Predictions Ontology of Earthquake Probability: Metaphor

    E-Print Network [OSTI]

    Stark, Philip B.

    Intro Probability Rabbits Description Predictions Ontology of Earthquake Probability: Metaphor be abandoned in favor of common sense. #12;Intro Probability Rabbits Description Predictions Earthquake not random. ­Wm. ShakesEarth #12;Intro Probability Rabbits Description Predictions Earthquake Poker

  1. Stability of the holographic description of the Universe

    E-Print Network [OSTI]

    Peng Huang; Yong-chang Huang

    2013-04-01

    We investigate the stability of the holographic description of the universe. By treating the perturbation globally, we discover that this description is stable, which is support for the holographic description of the universe.

  2. DNA polymerase having modified nucleotide binding site for DNA sequencing

    DOE Patents [OSTI]

    Tabor, S.; Richardson, C.

    1997-03-25

    A modified gene encoding a modified DNA polymerase is disclosed. The modified polymerase incorporates dideoxynucleotides at least 20-fold better compared to the corresponding deoxynucleotides as compared with the corresponding naturally-occurring DNA polymerase. 6 figs.

  3. Focused Crawling of the Deep Web Using Service Class Descriptions

    SciTech Connect (OSTI)

    Rocco, D; Liu, L; Critchlow, T

    2004-06-21

    Dynamic Web data sources--sometimes known collectively as the Deep Web--increase the utility of the Web by providing intuitive access to data repositories anywhere that Web access is available. Deep Web services provide access to real-time information, like entertainment event listings, or present a Web interface to large databases or other data repositories. Recent studies suggest that the size and growth rate of the dynamic Web greatly exceed that of the static Web, yet dynamic content is often ignored by existing search engine indexers owing to the technical challenges that arise when attempting to search the Deep Web. To address these challenges, we present DynaBot, a service-centric crawler for discovering and clustering Deep Web sources offering dynamic content. DynaBot has three unique characteristics. First, DynaBot utilizes a service class model of the Web implemented through the construction of service class descriptions (SCDs). Second, DynaBot employs a modular, self-tuning system architecture for focused crawling of the DeepWeb using service class descriptions. Third, DynaBot incorporates methods and algorithms for efficient probing of the Deep Web and for discovering and clustering Deep Web sources and services through SCD-based service matching analysis. Our experimental results demonstrate the effectiveness of the service class discovery, probing, and matching algorithms and suggest techniques for efficiently managing service discovery in the face of the immense scale of the Deep Web.

  4. Nuclear Waste Partnership (NWP) Quality Assurance Program Description...

    Office of Environmental Management (EM)

    Waste Partnership (NWP) Quality Assurance Program Description (QAPD) Nuclear Waste Partnership (NWP) Quality Assurance Program Description (QAPD) The documents included in this...

  5. SEDIMENT DESCRIPTIONS R/V NATHANIEL B. PALMER

    E-Print Network [OSTI]

    SEDIMENT DESCRIPTIONS for R/V NATHANIEL B. PALMER Cruise 7, 1995 #12;DESCRIPTIONS OF SEDIMENT-Slide Analysis.........................................................................11 SEDIMENT CLASSIFICATION...................................................................11 Pelagic sediment..............................................................................12

  6. Structure Optimization of FePt Nanoparticles of Various Sizes for Magnetic Data Storage

    E-Print Network [OSTI]

    Laughlin, David E.

    to a modified reaction route based on Sun et al.[1] Hexane dispersions of nanoparticles were dried increases with particle size and with the temperature in the range 600 °C to 650 °C, being close to unity-assembly over large areas, and a narrow distribution of switching fields. The long storage time and high storage

  7. PublishedbyManeyPublishing(c)IOMCommunicationsLtd Size distribution of oxides and toughness of

    E-Print Network [OSTI]

    Cambridge, University of

    the size distribution of oxide particles in steel weld metals which have predominantly martensitic of steel weld metals S. Terashima* and H. K. D. H. Bhadeshia Experiments have been conducted to modify microstruc- tures dominated by low carbon martensite. The role of oxide particles introduced into the metal

  8. Modified Theoretical Minimum Emittance Lattice for an Electron...

    Office of Scientific and Technical Information (OSTI)

    Modified Theoretical Minimum Emittance Lattice for an Electron Storage Ring with Extreme-Low Emittance Citation Details In-Document Search Title: Modified Theoretical Minimum...

  9. HYDRAULIC CALCULATIONS FOR A MODIFIED IN-SITU RETORT

    E-Print Network [OSTI]

    Hall, W.G.

    2012-01-01

    LBL-1 0431 UC-91 HYDRAULIC CALCULATIONS FOR A MODIFIED IN-REFERENCES • . • • • • . , . HYDRAULIC CALCULATIONS FOR ACalifomia. LBL-10431 HYDRAULIC CALCULATIONS FOR A MODIFIED

  10. Surface modified CFx cathode material for ultrafast discharge...

    Office of Scientific and Technical Information (OSTI)

    Surface modified CFx cathode material for ultrafast discharge and high energy density Citation Details In-Document Search Title: Surface modified CFx cathode material for ultrafast...

  11. Surface modified CFx cathode material for ultrafast discharge...

    Office of Scientific and Technical Information (OSTI)

    Surface modified CFx cathode material for ultrafast discharge and high energy density Prev Next Title: Surface modified CFx cathode material for ultrafast discharge and high...

  12. Size exclusion deep bed filtration: Experimental and modelling uncertainties

    SciTech Connect (OSTI)

    Badalyan, Alexander You, Zhenjiang; Aji, Kaiser; Bedrikovetsky, Pavel; Carageorgos, Themis; Zeinijahromi, Abbas

    2014-01-15

    A detailed uncertainty analysis associated with carboxyl-modified latex particle capture in glass bead-formed porous media enabled verification of the two theoretical stochastic models for prediction of particle retention due to size exclusion. At the beginning of this analysis it is established that size exclusion is a dominant particle capture mechanism in the present study: calculated significant repulsive Derjaguin-Landau-Verwey-Overbeek potential between latex particles and glass beads is an indication of their mutual repulsion, thus, fulfilling the necessary condition for size exclusion. Applying linear uncertainty propagation method in the form of truncated Taylor's series expansion, combined standard uncertainties (CSUs) in normalised suspended particle concentrations are calculated using CSUs in experimentally determined parameters such as: an inlet volumetric flowrate of suspension, particle number in suspensions, particle concentrations in inlet and outlet streams, particle and pore throat size distributions. Weathering of glass beads in high alkaline solutions does not appreciably change particle size distribution, and, therefore, is not considered as an additional contributor to the weighted mean particle radius and corresponded weighted mean standard deviation. Weighted mean particle radius and LogNormal mean pore throat radius are characterised by the highest CSUs among all experimental parameters translating to high CSU in the jamming ratio factor (dimensionless particle size). Normalised suspended particle concentrations calculated via two theoretical models are characterised by higher CSUs than those for experimental data. The model accounting the fraction of inaccessible flow as a function of latex particle radius excellently predicts normalised suspended particle concentrations for the whole range of jamming ratios. The presented uncertainty analysis can be also used for comparison of intra- and inter-laboratory particle size exclusion data.

  13. Size-reduction of nanodiamonds via air oxidation

    E-Print Network [OSTI]

    Gaebel, T; Chen, J; Hemmer, P; Rabeau, J R

    2011-01-01

    Here we report the size reduction and effects on nitrogen-vacancy centres in nanodiamonds by air oxidation using a combined atomic force and confocal microscope. The average height reduction of individual crystals as measured by atomic force microscopy was 10.6 nm/h at 600 {\\deg}C air oxidation at atmospheric pressure. The oxidation process modified the surface including removal of non-diamond carbon and organic material which also led to a decrease in background fluorescence. During the course of the nanodiamond size reduction, we observed the annihilation of nitrogen-vacancy centres which provided important insight into the formation of colour centres in small crystals. In these unirradiated samples, the smallest nanodiamond still hosting a stable nitrogen-vacancy centre observed was 8 nm.

  14. Size-reduction of nanodiamonds via air oxidation

    E-Print Network [OSTI]

    T. Gaebel; C. Bradac; J. Chen; P. Hemmer; J. R. Rabeau

    2011-04-27

    Here we report the size reduction and effects on nitrogen-vacancy centres in nanodiamonds by air oxidation using a combined atomic force and confocal microscope. The average height reduction of individual crystals as measured by atomic force microscopy was 10.6 nm/h at 600 {\\deg}C air oxidation at atmospheric pressure. The oxidation process modified the surface including removal of non-diamond carbon and organic material which also led to a decrease in background fluorescence. During the course of the nanodiamond size reduction, we observed the annihilation of nitrogen-vacancy centres which provided important insight into the formation of colour centres in small crystals. In these unirradiated samples, the smallest nanodiamond still hosting a stable nitrogen-vacancy centre observed was 8 nm.

  15. A novel hybrid (wind-photovoltaic) system sizing procedure

    SciTech Connect (OSTI)

    Hocaoglu, Fatih O.; Gerek, Oemer N.; Kurban, Mehmet

    2009-11-15

    Wind-photovoltaic hybrid system (WPHS) utilization is becoming popular due to increasing energy costs and decreasing prices of turbines and photovoltaic (PV) panels. However, prior to construction of a renewable generation station, it is necessary to determine the optimum number of PV panels and wind turbines for minimal cost during continuity of generated energy to meet the desired consumption. In fact, the traditional sizing procedures find optimum number of the PV modules and wind turbines subject to minimum cost. However, the optimum battery capacity is either not taken into account, or it is found by a full search between all probable solution spaces which requires extensive computation. In this study, a novel description of the production/consumption phenomenon is proposed, and a new sizing procedure is developed. Using this procedure, optimum battery capacity, together with optimum number of PV modules and wind turbines subject to minimum cost can be obtained with good accuracy. (author)

  16. ARM - Measurement - Cloud droplet size

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Comments?govInstrumentsnoaacrnBarrow, Alaska Outreach Home Roomparticle size distributionconcentrationdroplet size

  17. Plants having modified response to ethylene

    DOE Patents [OSTI]

    Meyerowitz, E.M.; Chang, C.; Bleecker, A.B.

    1997-11-18

    The invention includes transformed plants having at least one cell transformed with a modified ETR nucleic acid. Such plants have a phenotype characterized by a decrease in the response of at least one transformed plant cell to ethylene as compared to a plant not containing the transformed plant cell. Tissue and/or temporal specificity for expression of the modified ETR nucleic acid is controlled by selecting appropriate expression regulation sequences to target the location and/or time of expression of the transformed nucleic acid. The plants are made by transforming at least one plant cell with an appropriate modified ETR nucleic acid, regenerating plants from one or more of the transformed plant cells and selecting at least one plant having the desired phenotype. 31 figs.

  18. Plants having modified response to ethylene

    DOE Patents [OSTI]

    Meyerowitz, Elliot M. (Pasadena, CA); Chang, Caren (Pasadena, CA); Bleecker, Anthony B. (Madison, WI)

    1998-01-01

    The invention includes transformed plants having at least one cell transformed with a modified ETR nucleic acid. Such plants have a phenotype characterized by a decrease in the response of at least one transformed plant cell to ethylene as compared to a plant not containing the transformed plant cell. Tissue and/or temporal specificity for expression of the modified ETR nucleic acid is controlled by selecting appropriate expression regulation sequences to target the location and/or time of expression of the transformed nucleic acid. The plants are made by transforming at least one plant cell with an appropriate modified ETR nucleic acid, regenerating plants from one or more of the transformed plant cells and selecting at least one plant having the desired phenotype.

  19. Plants having modified response to ethylene

    DOE Patents [OSTI]

    Meyerowitz, Elliott M. (Pasadena, CA); Chang, Caren (Pasadena, CA); Bleecker, Anthony B. (Madison, WI)

    1997-01-01

    The invention includes transformed plants having at least one cell transformed with a modified ETR nucleic acid. Such plants have a phenotype characterized by a decrease in the response of at least one transformed plant cell to ethylene as compared to a plant not containing the transformed plant cell. Tissue and/or temporal specificity for expression of the modified ETR nucleic acid is controlled by selecting appropriate expression regulation sequences to target the location and/or time of expression of the transformed nucleic acid. The plants are made by transforming at least one plant cell with an appropriate modified ETR nucleic acid, regenerating plants from one or more of the transformed plant cells and selecting at least one plant having the desired phenotype.

  20. Plants having modified response to ethylene

    DOE Patents [OSTI]

    Meyerowitz, E.M.; Chang, C.; Bleecker, A.B.

    1998-10-20

    The invention includes transformed plants having at least one cell transformed with a modified ETR nucleic acid. Such plants have a phenotype characterized by a decrease in the response of at least one transformed plant cell to ethylene as compared to a plant not containing the transformed plant cell. Tissue and/or temporal specificity for expression of the modified ETR nucleic acid is controlled by selecting appropriate expression regulation sequences to target the location and/or time of expression of the transformed nucleic acid. The plants are made by transforming at least one plant cell with an appropriate modified ETR nucleic acid, regenerating plants from one or more of the transformed plant cells and selecting at least one plant having the desired phenotype. 67 figs.

  1. Description of the RDCDS Meteorological Component

    SciTech Connect (OSTI)

    Pekour, Mikhail S.; Berg, Larry K.

    2007-10-01

    This report provides a detailed description of the Rapidly Deployable Chemical Defense System (RDCDS) Meteorological Component. The Meteorological Component includes four surface meteorological stations, miniSODAR, laptop computers, and communications equipment. This report describes the equipment that is used, explains the operation of the network, and gives instructions for setting up the Component and replacing defective parts. A detailed description of operation and use of the individual sensors, including the data loggers is not covered in the current document, and the interested reader should refer to the manufacturer’s documentation.

  2. Electrochemical apparatus comprising modified disposable rectangular cuvette

    DOE Patents [OSTI]

    Dattelbaum, Andrew M; Gupta, Gautam; Morris, David E

    2013-09-10

    Electrochemical apparatus includes a disposable rectangular cuvette modified with at least one hole through a side and/or the bottom. Apparatus may include more than one cuvette, which in practice is a disposable rectangular glass or plastic cuvette modified by drilling the hole(s) through. The apparatus include two plates and some means of fastening one plate to the other. The apparatus may be interfaced with a fiber optic or microscope objective, and a spectrometer for spectroscopic studies. The apparatus are suitable for a variety of electrochemical experiments, including surface electrochemistry, bulk electrolysis, and flow cell experiments.

  3. Classical and quantum linearized descriptions of degenerate optomechanical parametric oscillators

    E-Print Network [OSTI]

    Sebastian Pina-Otey; Fernando Jiménez; Peter Degenfeld-Schonburg; Carlos Navarrete-Benlloch

    2015-08-26

    Recent advances in the development of modern quantum technologies have opened the possibility of studying the interplay between spontaneous parametric down-conversion and optomechanics, two of the most fundamental nonlinear optical processes. Apart from practical reasons, such scenario is very interesting from a fundamental point of view, because it allows exploring the optomechanical interaction in the presence of a strongly quantum-correlated field, the down-converted mode. In this work we analyze such problem from two approximate but valuable perspectives: the classical limit and the limit of small quantum fluctuations. We show that, in the presence of optomechanical coupling, the well-known classical phase diagram of the optical problem gets modified by the appearance of new dynamical instabilities. As for the quantum-mechanical description, we prove the ability of the squeezed down-converted field to cool down the mechanical motion not only to thermal but also to squeezed mechanical states, and in a way that can be much less sensitive to parameters (e.g., detuning of the driving laser) than standard sideband cooling.

  4. Better Buildings Neighborhood Program Business Models Guide: Program Administrator Description

    Broader source: Energy.gov [DOE]

    Better Buildings Neighborhood Program Business Models Guide: Program Administrator Business Models, Program Administrator Description.

  5. Updated 06/13 Program description

    E-Print Network [OSTI]

    Garfunkel, Eric

    Updated 06/13 Program description The Rutgers, School of Health-Related Professions (SHRP) Dental jointly sponsored by the Rutgers-School of Health Related Professions with Brookdale Community College, Thomas Edison State College or Union County College and the Rutgers-School of Health Related Professions

  6. II. DEVICE DESCRIPTION AND GENERAL PHYSICS REQUIREMENTS

    E-Print Network [OSTI]

    II. DEVICE DESCRIPTION AND GENERAL PHYSICS REQUIREMENTS b. H. NEILSON, Jr. (ORNL) ILA. INTRODUCTION To accomplish the dual goals set forth in the mis- sion statement - determination of burning plasma physics years. The pro cess has drawn extensively upon the world toka- mak physics data base as well

  7. University of Memphis University Libraries Position Description

    E-Print Network [OSTI]

    Dasgupta, Dipankar

    University of Memphis University Libraries ­ Position Description I. DEPARTMENT: Preservation and Special Collections II. POSITION: ULDR Assistant III. CLASSIFICATION: Graduate Assistantship IV. NAME OF INCUMBENT: Vacant V. POSITION NO.: VI. JOB PURPOSE This position is a member of the team providing support

  8. University of Memphis University Libraries Position Description

    E-Print Network [OSTI]

    Dasgupta, Dipankar

    University of Memphis University Libraries ­ Position Description I. DEPARTMENT: Preservation and Special Collections II. POSITION: NAAPA Assistant III. CLASSIFICATION: Graduate Assistantship IV. NAME OF INCUMBENT: Open V. POSITION NO.: 16330 VI. JOB PURPOSE This position is a member of the team providing

  9. University of Memphis University Libraries -Position Description

    E-Print Network [OSTI]

    Dasgupta, Dipankar

    Libraries ­ Library Information Systems II. POSITION: ILS Librarian III. CLASSIFICATION: Faculty IV. NAME of the various components of the ILMS to meet the needs of library users and library personnel. The ILS LibrarianUniversity of Memphis University Libraries - Position Description I. DEPARTMENT: University

  10. COURSE DESCRIPTION Dept., Number CS 4352

    E-Print Network [OSTI]

    Kreinovich, Vladik

    Semester hours 45 hours + 21 lab hours Course Coordinator Luc Longpré Current Catalog Description of programming languages, parsing techniques, intermediate languages, optimization and code generation. Textbook definition \\& manipulation including one and two pass updates. 3. lex and yacc to generate a basic parser 4

  11. WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED,

    E-Print Network [OSTI]

    for reduction in mixed waste generation Pump Oil Substitution 51 Hazardous Waste / Industrial Waste $3,520 $6 with the subsequent clean up costs ($15,000). Hydraulic Oil Product Substitution 3,000 Industrial Waste $26,000 $0 $26WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED, REUSED, RECYCLED OR CONSERVED IN 2003 WASTE TYPE

  12. WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED,

    E-Print Network [OSTI]

    . Removed grit and sludge are mixed with the waste oil. Photon-counting spectrofluorimeter Substitution 54 or composted at the stump dump. Plant Engineering grounds vehicle wash system * Waste minimization 8,000 OilsWASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED, REUSED, RECYCLED OR CONSERVED IN 2007 WASTE TYPE

  13. April, 2000 1 PART I: JOB DESCRIPTION

    E-Print Network [OSTI]

    April, 2000 1 PART I: JOB DESCRIPTION Weighted Job Questionnaire (WJQ) Custom Department Name: SFU ____ Evaluating Supervisor __X__ #12;April, 2000 2 SIMON FRASER UNIVERSITY & C.U.P.E., Local 3338 WEIGHTED JOB and academic requirements. Manages Corporate Time calendar for Grad Chair. #12;April, 2000 3 Accesses student

  14. DESCRIPTION OF ACCIDENT MSU DRIVERS SIGNATURE

    E-Print Network [OSTI]

    Dyer, Bill

    of Commercial Policy Number) Motor vehicles that are owned, rented, leased, or loaned to Montana State's Name: MSU VEHICLE (VEHICLE #1) Issued Citation: YES NO Explain: Department: Phone: 994 - Vehicle Owner: Use of Vehicle: Vehicle: Make Model Year VIN: Plate Number: State: Description of Damage: Safety

  15. Team Description Paper Virtual Robot competition

    E-Print Network [OSTI]

    Visser, Arnoud

    UvA Rescue Team Description Paper Virtual Robot competition Rescue Simulation League RoboCup Iran- ject [7], although their participation for the Iran Open and Brazil 2014 is not yet con#12;rmed and not full 6D SLAM, because the 3D point-cloud consists of slices of a rotating 2D laser scanner. When

  16. Documentation for database.txt Description

    E-Print Network [OSTI]

    Gilchrist, Michael A.

    Documentation for database.txt Description: The file database.txtis a 163MB file which contains a pair-wise list of all the proteins seen in the TAP and HMS-PCI databases as well as the MIPS Complex-wise association. See Gilchrist et al. (2003) for more details. About database.txt: The database is available

  17. Subject Description Form Subject Code COMP5222

    E-Print Network [OSTI]

    Liu, Wenyin

    Subject Description Form Subject Code COMP5222 Subject Title Software Testing and Quality Assurance. present effective testing techniques (both black-box and white- box) for ensuring high quality software; 2 Syllabus Software Quality Concepts: Software quality problems. Quality definition. Cost of quality

  18. Cultural Psychology and Social Practice Description

    E-Print Network [OSTI]

    Schwefel, Hans-Peter

    1 Cultural Psychology and Social Practice Description The professional programme in Cultural Psychology and Social Practice provides students with the knowledge and skills to apply cultural psychology of diagnoses, the psychologization of contemporary culture, and public engagement with art, museums, zoos

  19. Blackout of 2003: Description and Responses

    E-Print Network [OSTI]

    Systems Institut de recherche d'Hydro-Québec (IREQ) ISO New England Korea Elec. Power Research InstitutePSERC Blackout of 2003: Description and Responses Dennis Ray Executive Director Power Systems interchange of ideas · Educate the next generation of power industry engineers #12;3 PSERC Collaborating

  20. University of Alberta GIGA Program Description and

    E-Print Network [OSTI]

    Culberson, Joseph

    University of Alberta GIGA Program Description and Operation by Joseph Culberson Technical Report TR 92--06 June 1992 DEPARTMENT OF COMPUTING SCIENCE The University of Alberta Edmonton, Alberta of Alberta, Edmonton, Alberta, Canada, T6G 2H1. email:joe@cs.ualberta.ca y This paper is available via ftp

  1. Alberta Alzheimer Research Program III Description

    E-Print Network [OSTI]

    Michelson, David G.

    Alberta Alzheimer Research Program III Description The Alzheimer Society of Alberta and Northwest Territories (ASANT) and the Alberta Prion Research Institute (Prion Institute) present the Alberta Alzheimer Research Program (AARP) III. The AARP III allows qualified Alberta-based investigators to seek funding

  2. Course Description Grid Computing, NGSSC, 2p

    E-Print Network [OSTI]

    Elmroth, Erik

    #12;­ Grid security: Grid security demands and solutions for, e.g., authen- tication, authorityCourse Description Grid Computing, NGSSC, 2p Erik Elmroth, Olle Mulmo, and Leif Nixon February 14, 2003 General information This course is designed to give a broad overview of the concept of grid comput

  3. Internship Position Description Title: Refugee Resettlement Intern

    E-Print Network [OSTI]

    Nelson, Tim

    Internship Position Description Title: Refugee Resettlement Intern Purpose The purpose of the World in the field of refugee resettlement. Possible Responsibilities Assist Case Workers with attending and transporting refugee clients to important appointments. Help newly arrived families with tasks such as paying

  4. Injection Molding-Injection Molding Process Description

    E-Print Network [OSTI]

    Colton, Jonathan S.

    Injection Molding-Injection Molding Process Description ver. 1 ME 4210: Manufacturing Processes and Engineering Prof. J.S. Colton © GIT 2009 2 #12;EquipmentEquipment Cl M ld B lClamp Mold Hopper Barrel ME 4210;Machine schematic ME 4210: Manufacturing Processes and Engineering Prof. J.S. Colton © GIT 2009 6 #12;Mold

  5. Injection Molding-Injection Molding Process Description

    E-Print Network [OSTI]

    Colton, Jonathan S.

    Injection Molding-Injection Molding Process Description ver. 1 1ME 6222: Manufacturing Processes and Systems Prof. J.S. Colton © GIT 2009 #12;Injection molding machineInjection molding machine Cl M ld B lClamp Mold Hopper Barrel 5ME 6222: Manufacturing Processes and Systems Prof. J.S. Colton © GIT 2009 #12;Kraus

  6. HOUSING RESOURCES Description of Boston Neighborhoods

    E-Print Network [OSTI]

    HOUSING RESOURCES Boston Description of Boston Neighborhoods http://www.bu.edu/offcampus/tips-resources/bostons-neighborhoods/ Summer Housing Boston http://www.urbaninterns.com/journal/jobseekers/summer-housing-for-boston-interns/ https://www.northeastern.edu/conferences/intern/index.html http://housing.mit.edu/summer_guest/non_mit_summer_internship_housing

  7. AN ALGEBRAIC DESCRIPTION OF ITERATIVE DECODING SCHEMES

    E-Print Network [OSTI]

    Soljanin, Emina

    AN ALGEBRAIC DESCRIPTION OF ITERATIVE DECODING SCHEMES ELKE OFFER AND EMINA SOLJANIN Abstract University of Technology, D- 80290 Munich, Germany, elke@lnt.e-technik.tu-muenchen.de Mathematical Sciences Research Center, Bell Labs, Lucent Technologies, Murray Hill, NJ 07974, USA. emina@lucent.com 1 #12;2 E

  8. DESCRIPTION OF SELECTED WASTE MANAGEMENT PROBLEMS,

    E-Print Network [OSTI]

    #12;DESCRIPTION OF SELECTED WASTE MANAGEMENT PROBLEMS, OPTIONS AND STRATEGIES Prepared for BC of Agriculture, Fisheries and Food Fisheries and Oceans Fraser River Action Plan November, 1996 Prepared by P. E Nutrients in Wastes 22 4.2.5 Waste Treatment 23 5.0 STRATEGY DEVELOPMENT 24 5.1 LAND USE MANAGEMENT 24 5

  9. Industry Analysis and Customer Segmentation Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    : A leading health care company, serving more than 75 million people worldwide. Our family of companiesIndustry Analysis and Customer Segmentation Company Description: Our company specializes will research geographic market share by brand/company. The final deliverable will be a prioritized list

  10. C. PROJECT DESCRIPTION 1. List of Participants

    E-Print Network [OSTI]

    Pasternack, Gregory B.

    , 1989), yet there are excellent examples in such efforts as the Manhattan Project, NASA's Apollo MoonC. PROJECT DESCRIPTION 1. List of Participants Name Role* Institution/Org.** Expertise Previous Program, and the Human Genome Project (Fogg and LaBolle, 2006). The driving force behind each

  11. On a Modified Klein Gordon Equation

    E-Print Network [OSTI]

    B. S. Lakshmi

    2009-08-09

    We consider a modified Klein-Gordon equation that arises at ultra high energies. In a suitable approximation it is shown that for the linear potential which is of interest in quark interactions, their confinement for example,we get solutions that mimic the Harmonic oscillator energy levels, surprisingly. An equation similar to the beam equation is obtained in the process.

  12. Modifiability through Architecture Analysis Nico Lassing

    E-Print Network [OSTI]

    van Vliet, Hans

    of maintenance. The area addressing this is software architecture analysis of modifiability. We have de- veloped areas, such as telecommunications, logistics and business infor- mation systems. This paper gives- tinguish various goals in this area, namely risk as- sessment, maintenance prediction and architecture

  13. System Design Description PFP Thermal Stabilization

    SciTech Connect (OSTI)

    RISENMAY, H.R.

    2000-04-25

    The purpose of this document is to provide a system design description (SDD) and design basis for the Plutonium Finishing Plant (PFP) Thermal Stabilization project. The chief objective of the SDD is to document the Structures, Systems, and Components (SSCs) that establish and maintain the facility Safety Envelope necessary for normal safe operation of the facility; as identified in the FSAR, the OSRs, and Safety Assessment Documents (SADs). This safety equipment documentation should satisfy guidelines for the SDD given in WHC-SD-CP-TI-18 1, Criteria for Identification and Control of Equipment Necessary for Preservation of the Safety Envelope and Safe Operation of PFP. The basis for operational, alarm response, maintenance, and surveillance procedures are also identified and justified in this document. This document and its appendices address the following elements of the PFP Thermal Stabilization project: Functional and design requirements; Design description; Safety Envelope Analysis; Safety Equipment Class; and Operational, maintenance and surveillance procedures.

  14. Parametric description of the quantum measurement process

    E-Print Network [OSTI]

    Pietro Liuzzo-Scorpo; Alessandro Cuccoli; Paola Verrucchi

    2015-05-12

    We present a description of the measurement process based on the parametric representation with environmental coherent states. This representation is specifically tailored for studying quantum systems whose environment needs being considered through the quantum-to-classical cross-over. Focusing upon projective measures, and exploiting the connection between large-$N$ quantum theories and the classical limit of related ones, we manage to push our description beyond the pre-measurement step. This allows us to show that the outcome production follows from a global-symmetry breaking, entailing the observed system's state reduction, and that the statistical nature of the process is brought about, together with the Born's rule, by the macroscopic character of the measuring apparatus.

  15. Galilei invariant technique for quantum system description

    SciTech Connect (OSTI)

    Kamuntavi?ius, Gintautas P.

    2014-04-15

    Problems with quantum systems models, violating Galilei invariance are examined. The method for arbitrary non-relativistic quantum system Galilei invariant wave function construction, applying a modified basis where center-of-mass excitations have been removed before Hamiltonian matrix diagonalization, is developed. For identical fermion system, the Galilei invariant wave function can be obtained while applying conventional antisymmetrization methods of wave functions, dependent on single particle spatial variables.

  16. Black Hole Thermodynamics in Modified Gravity

    E-Print Network [OSTI]

    Jonas R. Mureika; John W. Moffat; Mir Faizal

    2015-03-03

    We analyze the thermodynamics of a non-rotating and rotating black hole in a modified theory of gravity that includes scalar and vector modifications to general relativity, which results in a modified gravitational constant $G = G_N(1+\\alpha)$ and a new gravitational charge $Q = \\sqrt{\\alpha G_N}M$. The influence of the parameter $\\alpha$ alters the non-rotating black hole's lifetime, temperature and entropy profiles from the standard Schwarzschild case. The thermodynamics of a rotating black hole is analyzed and it is shown to possess stable, cold remnants. The thermodynamic properties of a vacuum solution regular at $r=0$ are investigated and the solution without a horizon called a "gray hole" is not expected to possess an information loss problem.

  17. Property:Technology Description | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource HistoryPotentialRuralUtilityScalePVGeneration Jump to:SpatialResolution Jump to: navigation,Description

  18. ARM - Measurement - Hydrometeor Size Distribution

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Comments?govInstrumentsnoaacrnBarrow, Alaska Outreach Home Roomparticle sizefraction ARMGeometry ARM DataSize

  19. Macroscopic description for networks of spiking neurons

    E-Print Network [OSTI]

    Ernest Montbrió; Diego Pazó; Alex Roxin

    2015-06-22

    A major goal of neuroscience, statistical physics and nonlinear dynamics is to understand how brain function arises from the collective dynamics of networks of spiking neurons. This challenge has been chiefly addressed through large-scale numerical simulations. Alternatively, researchers have formulated mean-field theories to gain insight into macroscopic states of large neuronal networks in terms of the collective firing activity of the neurons, or the firing rate. However, these theories have not succeeded in establishing an exact correspondence between the firing rate of the network and the underlying microscopic state of the spiking neurons. This has largely constrained the range of applicability of such macroscopic descriptions, particularly when trying to describe neuronal synchronization. Here we provide the derivation of a set of exact macroscopic equations for a network of spiking neurons. Our results reveal that the spike generation mechanism of individual neurons introduces an effective coupling between two biophysically relevant macroscopic quantities, the firing rate and the mean membrane potential, which together govern the evolution of the neuronal network. The resulting equations exactly describe all possible macroscopic dynamical states of the network, including states of synchronous spiking activity. Finally we show that the firing rate description is related, via a conformal map, with a low-dimensional description in terms of the Kuramoto order parameter, called Ott-Antonsen theory. We anticipate our results will be an important tool in investigating how large networks of spiking neurons self-organize in time to process and encode information in the brain.

  20. Characterization of electrochemically modified polycrystalline platinum surfaces

    SciTech Connect (OSTI)

    Krebs, L.C.; Ishida, Takanobu

    1991-12-01

    The characterization of electrochemically modified polycrystalline platinum surfaces has been accomplished through the use of four major electrochemical techniques. These were chronoamperometry, chronopotentiommetry, cyclic voltammetry, and linear sweep voltammetry. A systematic study on the under-potential deposition of several transition metals has been performed. The most interesting of these were: Ag, Cu, Cd, and Pb. It was determined, by subjecting the platinum electrode surface to a single potential scan between {minus}0.24 and +1.25 V{sub SCE} while stirring the solution, that the electrocatalytic activity would be regenerated. As a consequence of this study, a much simpler method for producing ultra high purity water from acidic permanganate has been developed. This method results in water that surpasses the water produced by pyrocatalytic distillation. It has also been seen that the wettability of polycrystalline platinum surfaces is greatly dependent on the quantity of oxide present. Oxide-free platinum is hydrophobic and gives a contact angle in the range of 55 to 62 degrees. We have also modified polycrystalline platinum surface with the electrically conducting polymer poly-{rho}-phenylene. This polymer is very stable in dilute sulfuric acid solutions, even under applied oxidative potentials. It is also highly resistant to electrochemical hydrogenation. The wettability of the polymer modified platinum surface is severely dependent on the choice of supporting electrolyte chosen for the electrochemical polymerization. Tetraethylammonium tetrafluoroborate produces a film that is as hydrophobic as Teflon, whereas tetraethylammonium perchlorate produces a film that is more hydrophilic than oxide-free platinum.

  1. Theoretical priors on modified growth parametrisations

    SciTech Connect (OSTI)

    Song, Yong-Seon; Hollenstein, Lukas; Caldera-Cabral, Gabriela; Koyama, Kazuya E-mail: Lukas.Hollenstein@unige.ch E-mail: Kazuya.Koyama@port.ac.uk

    2010-04-01

    Next generation surveys will observe the large-scale structure of the Universe with unprecedented accuracy. This will enable us to test the relationships between matter over-densities, the curvature perturbation and the Newtonian potential. Any large-distance modification of gravity or exotic nature of dark energy modifies these relationships as compared to those predicted in the standard smooth dark energy model based on General Relativity. In linear theory of structure growth such modifications are often parameterised by virtue of two functions of space and time that enter the relation of the curvature perturbation to, first, the matter over- density, and second, the Newtonian potential. We investigate the predictions for these functions in Brans-Dicke theory, clustering dark energy models and interacting dark energy models. We find that each theory has a distinct path in the parameter space of modified growth. Understanding these theoretical priors on the parameterisations of modified growth is essential to reveal the nature of cosmic acceleration with the help of upcoming observations of structure formation.

  2. Description du Schema de Neige ISBA-ES (Explicit Snow)

    E-Print Network [OSTI]

    Description du Schema de Neige ISBA-ES (Explicit Snow) Aaron Boone April, 2002 Updated in May, 2010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Chapter 1. ISBA-ES general description . . . . . . . . . . . . . . . . 5 1. Snow scheme physics . . . . . . . . . . . . . . . . . . . . . . . . . 7 a. Mass balance . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 b. Snow layering

  3. Description du Schema de Neige ISBA-ES (Explicit Snow)

    E-Print Network [OSTI]

    Description du Schema de Neige ISBA-ES (Explicit Snow) Aaron Boone April, 2002 Updated in November . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Chapter 1. ISBA-ES general description . . . . . . . . . . . . . . . . 5 1. Snow scheme physics . . . . . . . . . . . . . . . . . . . . . . . . . 7 a. Mass balance . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 b. Snow layering

  4. Solving a Complex Prisoner's Dilemma with SelfModifying Policies

    E-Print Network [OSTI]

    Schmidhuber, Juergen

    Solving a Complex Prisoner's Dilemma with Self­Modifying Policies Jieyu Zhao and J of the prisoner's dilemma. 1 Overview SMP/SSA. An animat's modifiable components that determine its behavior

  5. SY101 in situ viscometer instrument system design description

    SciTech Connect (OSTI)

    Pearce, K.L.; Stokes, T.I.; Vagelatos, N.

    1994-08-18

    This documents the design and description of the in situ viscometer, developed for the hydrogen mitigation project.

  6. STEP Energy Coach and Technical Consultant Job Descriptions

    Broader source: Energy.gov [DOE]

    STEP Energy Coach and Technical Consultant Job Descriptions, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  7. Hydrocracking process using disparate catalyst particle sizes

    SciTech Connect (OSTI)

    Kukes, S.G.; Miller, J.T.; Gutberlet, L.C.; Kelterboro, J.C

    1989-05-30

    This patent describes a process for the hydrocracking of a hydrocarbon feedstock which comprises reacting the feedstock with hydrogen at hydrocracking conversion conditions in a plurality of reaction zones in series containing hydrocracking catalyst wherein at least one of the reaction zones contains a small nominal size hydrocracking catalyst wherein the small nominal size catalyst has a U.S. sieve mesh size ranging from about 10 to about 16, and wherein at least one reaction zone upstream of the reaction zone containing the small nominal size hydrocracking catalyst having a particle size greater than the small nominal size hydrocracking catalyst.

  8. Incremental Machine Descriptions for GCC Sameera Deshpande Uday P. Khedker

    E-Print Network [OSTI]

    Khedker, Uday

    Incremental Machine Descriptions for GCC Sameera Deshpande Uday P. Khedker Indian Institute of Technology, Bombay {sameera,uday}@cse.iitb.ac.in Abstract The mechanism of providing machine descriptions a GCC port exists. However, this mechanism is quite ad hoc and the machine descriptions are dif- ficult

  9. SEDIMENT DESCRIPTIONS R/V NATHANIEL B. PALMER

    E-Print Network [OSTI]

    #12;#12;SEDIMENT DESCRIPTIONS for R/V NATHANIEL B. PALMER Cruise 8, 1993 #12;#12;DESCRIPTIONS OF SEDIMENT RECOVERED BY THE R/V NATHANIEL B. PALMER, UNITED STATES ANTARCTIC PROGRAM CRUISE 8, 1993 Edited by Thomas R. Janecek Sediment Descriptions Matthew G. Curren Antarctic Marine Geology Research Facility

  10. SEDIMENT DESCRIPTIONS R/V NATHANIEL B. PALMER

    E-Print Network [OSTI]

    #12;#12;SEDIMENT DESCRIPTIONS for R/V NATHANIEL B. PALMER Cruise 1, 1994 #12;#12;DESCRIPTIONS OF SEDIMENT RECOVERED BY THE R/V NATHANIEL B. PALMER, UNITED STATES ANTARCTIC PROGRAM CRUISE 1, 1994 Edited by Thomas R. Janecek Sediment Descriptions Rice University Hamilton College Colorado University Ms

  11. SEDIMENT DESCRIPTIONS R/V NATHANIEL B. PALMER

    E-Print Network [OSTI]

    #12;#12;SEDIMENT DESCRIPTIONS for R/V NATHANIEL B. PALMER Cruise 1, 1993 #12;#12;DESCRIPTIONS OF SEDIMENT RECOVERED BY THE R/V NATHANIEL B. PALMER, UNITED STATES ANTARCTIC PROGRAM CRUISE 1, 1993 Edited by Thomas R. Janecek Sediment Descriptions Matthew G. Curren Antarctic Marine Geology Research Facility

  12. Predicting Job Salaries from Text Descriptions Anonymous Author(s)

    E-Print Network [OSTI]

    Freitas, Nando de

    050 051 052 053 Predicting Job Salaries from Text Descriptions Anonymous Author(s) Affiliation Address descriptions of the posted jobs. Many listings provide a salary, but as many as half do not. For those listings that do not provide a salary, it is useful to predict a salary based on the description of that job. We

  13. Upper Trinity River Central City Modified Project Report

    E-Print Network [OSTI]

    US Army Corps of Engineers

    Appendix A Upper Trinity River Central City Modified Project Report Certifications This Appendix on technical components used in the preparation of the Modified Central City Project Report. The certifications November 2007. · Internal Quality Assurance reviews of the Modified Project Report, conducted by the Fort

  14. Hamiltonian description of the ideal fluid

    SciTech Connect (OSTI)

    Morrison, P.J.

    1994-01-01

    Fluid mechanics is examined from a Hamiltonian perspective. The Hamiltonian point of view provides a unifying framework; by understanding the Hamiltonian perspective, one knows in advance (within bounds) what answers to expect and what kinds of procedures can be performed. The material is organized into five lectures, on the following topics: rudiments of few-degree-of-freedom Hamiltonian systems illustrated by passive advection in two-dimensional fluids; functional differentiation, two action principles of mechanics, and the action principle and canonical Hamiltonian description of the ideal fluid; noncanonical Hamiltonian dynamics with examples; tutorial on Lie groups and algebras, reduction-realization, and Clebsch variables; and stability and Hamiltonian systems.

  15. On the Hamiltonian Description of Fluid Mechanics

    E-Print Network [OSTI]

    I. Antoniou; G. P. Pronko

    2002-03-14

    We suggest the Hamiltonian approach for fluid mechanics based on the dynamics, formulated in terms of Lagrangian variables. The construction of the canonical variables of the fluid sheds a light of the origin of Clebsh variables, introduced in the previous century. The developed formalism permits to relate the circulation conservation (Tompson theorem) with the invariance of the theory with respect to special diffiomorphisms and establish also the new conservation laws. We discuss also the difference of the Eulerian and Lagrangian description, pointing out the incompleteness of the first. The constructed formalism is also applicable for ideal plasma. We conclude with several remarks on the quantization of the fluid.

  16. Property:Description | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland:NPIProtectio1975)EnergyFloorAreaOfficesCollaborators JumpDataDescription Jump

  17. Description of Energy Intensity Tables (12)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)DecadeYear Jan Feb Mar Apr May Jun Jul AugAdditions1 0Delaware2 1 03. Description

  18. Property:File/Description | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to: navigation,Property Edit withExplorationTimePerMetricPropertyDescription

  19. Cosmological Evidence for Modified Gravity (MOG)

    E-Print Network [OSTI]

    Moffat, J W

    2015-01-01

    Deviations from the standard $\\Lambda$CDM model motivate an interpretation of early universe cosmology using the Scalar-Tensor-Vector-Gravity (STVG) theory. A constraint analysis carried out by Valentino, Melchiorri and Silk, revealed deviations from the growth of structure predicted by General Relativity, and a lensing anomaly in the angular CMB power spectrum data with a $95\\%$ c.l. The modified gravity (MOG) theory resolves the lensing deviation from the standard model and provides an explanation of the CMB and structure growth data.

  20. A macroscopic description of a generalized self-organized criticality system: Astrophysical applications

    SciTech Connect (OSTI)

    Aschwanden, Markus J., E-mail: aschwanden@lmsal.com [Lockheed Martin Solar and Astrophysics Laboratory, A021S, Building 252, 3251 Hanover Street, Palo Alto, CA 94304 (United States)

    2014-02-10

    We suggest a generalized definition of self-organized criticality (SOC) systems: SOC is a critical state of a nonlinear energy dissipation system that is slowly and continuously driven toward a critical value of a system-wide instability threshold, producing scale-free, fractal-diffusive, and intermittent avalanches with power law-like size distributions. We develop here a macroscopic description of SOC systems that provides an equivalent description of the complex microscopic fine structure, in terms of fractal-diffusive transport (FD-SOC). Quantitative values for the size distributions of SOC parameters (length scales L, time scales T, waiting times ?t, fluxes F, and fluences or energies E) are derived from first principles, using the scale-free probability conjecture, N(L)dL?L {sup –d}, for Euclidean space dimension d. We apply this model to astrophysical SOC systems, such as lunar craters, the asteroid belt, Saturn ring particles, magnetospheric substorms, radiation belt electrons, solar flares, stellar flares, pulsar glitches, soft gamma-ray repeaters, black-hole objects, blazars, and cosmic rays. The FD-SOC model predicts correctly the size distributions of 8 out of these 12 astrophysical phenomena, and indicates non-standard scaling laws and measurement biases for the others.

  1. 1 INTRODUCTION 1.1 Optical sizing

    E-Print Network [OSTI]

    Maerz, Norbert H.

    mining operation, from the drilling and blasting to the final product; the material size dictates all downstream operating costs. Previously, the only way to measure a size distribution was to stop production

  2. Grain size dependence of barchan dune dynamics

    E-Print Network [OSTI]

    C. Groh; N. Aksel; I. Rehberg; C. Kruelle

    2008-11-28

    The dependence of the barchan dune dynamics on the size of the grains involved is investigated experimentally. Downsized barchan dune slices are observed in a narrow water flow tube. The relaxation time from an initial symmetric triangular heap towards an asymmetric shape attractor increases with dune mass and decreases with grain size. The dune velocity increases with grain size. In contrast, the velocity scaling and the shape of the barchan dune is independent of the size of the grains.

  3. Thermal radiation and blackbody radiation drag of a large-sized perfectly black particle moving with relativistic velocity

    E-Print Network [OSTI]

    Kyasov, A A

    2015-01-01

    We have developed a self-consistent description of the radiation heat transfer and dynamics of large perfectly black spherical bodies with sizes much greater than the characteristic wavelength of radiation moving in a photon gas with relativistic velocity. The results can be important in astrophysics.

  4. Chemically modified carbonic anhydrases useful in carbon capture systems

    DOE Patents [OSTI]

    Novick, Scott J; Alvizo, Oscar

    2013-10-29

    The present disclosure relates to chemically modified carbonic anhydrase polypeptides and soluble compositions, homogenous liquid formulations comprising them. The chemically modified carbonic anhydrase polypeptides have improved properties relative to the same carbonic anhydrase polypeptide that is not chemically modified including the improved properties of increased activity and/or stability in the presence of amine compounds, ammonia, or carbonate ion. The present disclosure also provides methods of preparing the chemically modified polypeptides and methods of using the chemically modified polypeptides for accelerating the absorption of carbon dioxide from a gas stream into a solution as well as for the release of the absorbed carbon dioxide for further treatment and/or sequestering.

  5. Chemically modified carbonic anhydrases useful in carbon capture systems

    DOE Patents [OSTI]

    Novick, Scott; Alvizo, Oscar

    2013-01-15

    The present disclosure relates to chemically modified carbonic anhydrase polypeptides and soluble compositions, homogenous liquid formulations comprising them. The chemically modified carbonic anhydrase polypeptides have improved properties relative to the same carbonic anhydrase polypeptide that is not chemically modified including the improved properties of increased activity and/or stability in the presence of amine compounds, ammonia, or carbonate ion. The present disclosure also provides methods of preparing the chemically modified polypeptides and methods of using the chemically modified polypeptides for accelerating the absorption of carbon dioxide from a gas stream into a solution as well as for the release of the absorbed carbon dioxide for further treatment and/or sequestering.

  6. Transport-theoretical Description of Nuclear Reactions

    E-Print Network [OSTI]

    O. Buss; T. Gaitanos; K. Gallmeister; H. van Hees; M. Kaskulov; O. Lalakulich; A. B. Larionov; T. Leitner; J. Weil; U. Mosel

    2012-02-02

    In this review we first outline the basics of transport theory and its recent generalization to off-shell transport. We then present in some detail the main ingredients of any transport method using in particular the Giessen Boltzmann-Uehling-Uhlenbeck (GiBUU) implementation of this theory as an example. We discuss the potentials used, the ground state initialization and the collision term, including the in-medium modifications of the latter. The central part of this review covers applications of GiBUU to a wide class of reactions, starting from pion-induced reactions over proton and antiproton reactions on nuclei to heavy-ion collisions (up to about 30 AGeV). A major part concerns also the description of photon-, electron- and neutrino-induced reactions (in the energy range from a few 100 MeV to a few 100 GeV). For this wide class of reactions GiBUU gives an excellent description with the same physics input and the same code being used. We argue that GiBUU is an indispensable tool for any investigation of nuclear reactions in which final-state interactions play a role. Studies of pion-nucleus interactions, nuclear fragmentation, heavy ion reactions, hyper nucleus formation, hadronization, color transparency, electron-nucleus collisions and neutrino-nucleus interactions are all possible applications of GiBUU and are discussed in this article.

  7. COG Software Architecture Design Description Document

    SciTech Connect (OSTI)

    Buck, R M; Lent, E M

    2009-09-21

    This COG Software Architecture Design Description Document describes the organization and functionality of the COG Multiparticle Monte Carlo Transport Code for radiation shielding and criticality calculations, at a level of detail suitable for guiding a new code developer in the maintenance and enhancement of COG. The intended audience also includes managers and scientists and engineers who wish to have a general knowledge of how the code works. This Document is not intended for end-users. This document covers the software implemented in the standard COG Version 10, as released through RSICC and IAEA. Software resources provided by other institutions will not be covered. This document presents the routines grouped by modules and in the order of the three processing phases. Some routines are used in multiple phases. The routine description is presented once - the first time the routine is referenced. Since this is presented at the level of detail for guiding a new code developer, only the routines invoked by another routine that are significant for the processing phase that is being detailed are presented. An index to all routines detailed is included. Tables for the primary data structures are also presented.

  8. Semicontinuous Sized Types and Termination Andreas Abel #

    E-Print Network [OSTI]

    Abel, Andreas

    , and classical applications are total correctness and termination of partial evaluation. In languagesSemi­continuous Sized Types and Termination Andreas Abel # Institut für Informatik Ludwig to termination uses sized types: an ordinal bound for the size of a data structure is stored in its type

  9. Boron modified molybdenum silicide and products

    DOE Patents [OSTI]

    Meyer, M.K.; Akinc, M.

    1999-02-02

    A boron-modified molybdenum silicide material is disclosed having the composition comprising about 80 to about 90 weight % Mo, about 10 to about 20 weight % Si, and about 0.1 to about 2 weight % B and a multiphase microstructure including Mo{sub 5}Si{sub 3} phase as at least one microstructural component effective to impart good high temperature creep resistance. The boron-modified molybdenum silicide material is fabricated into such products as electrical components, such as resistors and interconnects, that exhibit oxidation resistance to withstand high temperatures in service in air as a result of electrical power dissipation, electrical resistance heating elements that can withstand high temperatures in service in air and other oxygen-bearing atmospheres and can span greater distances than MoSi{sub 2} heating elements due to improved creep resistance, and high temperature structural members and other fabricated components that can withstand high temperatures in service in air or other oxygen-bearing atmospheres while retaining creep resistance associated with Mo{sub 5}Si{sub 3} for structural integrity. 7 figs.

  10. Modified Newtonian Dynamics as an entropic force

    E-Print Network [OSTI]

    D. A. Carranza; S. Mendoza

    2015-06-09

    Under natural assumptions on the thermodynamic properties of space and time with the holographic principle we reproduce a MOND-like behaviour of gravity on particular scales of mass and length, where Newtonian gravity requires a modification or extension if no dark matter component is introduced in the description of gravitational phenomena. The result is directly obtained with the assumption that a fundamental constant of nature with dimensions of acceleration needs to be introduced into gravitational interactions. This in turn allows for modifications or extensions of the equipartion law and/or the holographic principle. In other words, MOND-like phenomenology can be reproduced when appropriate generalised concepts at the thermodynamical level of space and/or at the holographic principle are introduced. Thermodynamical modifications are reflected in extensions to the equipartition law which occur when the temperature of the system drops below a critical value, equals to Unruh's temperature evaluated at the acceleration constant scale introduced for the description of the gravitational phenomena. Our calculations extend the ones by Verlinde (2011) in which Newtonian gravity is shown to be an emergent phenomenon, and together with it reinforces the idea that gravity at all scales is emergent.

  11. Low-income consumers, though less aware of genetically modified foods, are concerned and want labels

    E-Print Network [OSTI]

    King, Nicelma J.

    2003-01-01

    sentiment about genetically modified food. Pew Initia- tiveless aware of genetically modified foods, are concerned andattitudes about genetically modified foods have been

  12. Hydrodynamical Description of the QCD Dirac Spectrum at Finite Chemical Potential

    E-Print Network [OSTI]

    Liu, Yizhuang; Zahed, Ismail

    2015-01-01

    We present a hydrodynamical description of the QCD Dirac spectrum at finite chemical potential as an uncompressible droplet in the complex eigenvalue space. For a large droplet, the fluctuation spectrum around the hydrostatic solution is gapped by a longitudinal Coulomb plasmon, and exhibits a frictionless odd viscosity. The stochastic relaxation time for the restoration/breaking of chiral symmetry is set by twice the plasmon frequency. The leading droplet size correction to the relaxation time is fixed by a universal odd viscosity to density ratio $\\eta_O/\\rho_0=(\\beta-1)/2$ for the three Dyson ensembles $\\beta=1,2,4$.

  13. Hazards of explosives dusts: Particle size effects

    SciTech Connect (OSTI)

    Cashdollar, K L; Hertzberg, M; Green, G M

    1992-02-01

    At the request of the Department of Energy, the Bureau of Mines has investigated the hazards of military explosives dispersed as dust clouds in a 20-L test chamber. In this report, the effect of particle size for HMX, HNS, RDX, TATB, and TNT explosives dusts is studied in detail. The explosibility data for these dusts are also compared to those for pure fuel dusts. The data show that all of the sizes of the explosives dusts that were studied were capable of sustaining explosions as dust clouds dispersed in air. The finest sizes (<10 [mu]m) of explosives dusts were less reactive than the intermediate sizes (20 to 60 [mu]m); this is opposite to the particle size effect observed previously for the pure fuel dusts. At the largest sizes studied, the explosives dusts become somewhat less reactive as dispersed dust clouds. The six sizes of the HMX dust were also studied as dust clouds dispersed in nitrogen.

  14. Astrophysical black holes in screened modified gravity

    SciTech Connect (OSTI)

    Davis, Anne-Christine; Jha, Rahul; Muir, Jessica; Gregory, Ruth E-mail: r.a.w.gregory@durham.ac.uk E-mail: jlmuir@umich.edu

    2014-08-01

    Chameleon, environmentally dependent dilaton, and symmetron gravity are three models of modified gravity in which the effects of the additional scalar degree of freedom are screened in dense environments. They have been extensively studied in laboratory, cosmological, and astrophysical contexts. In this paper, we present a preliminary investigation into whether additional constraints can be provided by studying these scalar fields around black holes. By looking at the properties of a static, spherically symmetric black hole, we find that the presence of a non-uniform matter distribution induces a non-constant scalar profile in chameleon and dilaton, but not necessarily symmetron gravity. An order of magnitude estimate shows that the effects of these profiles on in-falling test particles will be sub-leading compared to gravitational waves and hence observationally challenging to detect.

  15. Radionuclide partitioning in the modified Unex process

    SciTech Connect (OSTI)

    Babain, V.; Smirnov, I.; Alyapyshev, M.; Todd, T.A.; Law, J.D.; Herbst, R.S.; Paulenova, A.

    2008-07-01

    The Universal Extraction (UNEX) process has been developed for simultaneous extraction of long-lived radionuclides (cesium, strontium, actinides, and lanthanides) from acidic solutions in one extraction cycle. Modification of this organic solvent through the use of diamides of dipicolinic acid instead of CMPO increases the extraction capacity of UNEX solvent toward lanthanides and actinide metals, allowing for the processing of spent nuclear fuel. The possibility of radionuclide group separation using the modified UNEX solvent [HCCD (chlorinated cobalt dicarbollide), TBDPA (tetrabutyl-diamide of dipicolinic acid), PEG in FS-1 3 (phenyl-trifluoromethyl-sulfone)] is being investigated. Individual strip products, including a) actinides and lanthanides, b) strontium, and c) cesium, can be obtained by selective stripping from UNEX solvent. Such partitioning will make it possible to transform the Cs/Sr product into the most stable matrices for long-term storage and to further process the actinide/lanthanide product for recycling to a nuclear reactor. (authors)

  16. Modified nonlinear model of arcsin-electrodynamics

    E-Print Network [OSTI]

    Kruglov, S I

    2015-01-01

    A new modified model of nonlinear arcsin-electrodynamics with two parameters is proposed and analyzed. We obtain the corrections to the Coulomb law. The effect of vacuum birefringence takes place when the external constant magnetic field is present. We calculate indices of refraction for two perpendicular polarizations of electromagnetic waves and estimate bounds on the parameter $\\gamma$ from the BMV and PVLAS experiments. It is shown that the electric field of a point-like charge is finite at the origin. We calculate the finite static electric energy of point-like particles and demonstrate that the electron mass can have the pure electromagnetic nature. The symmetrical Belinfante energy-momentum tensor and dilatation current are found. We show that the dilatation symmetry and dual symmetry are broken in the model suggested.

  17. Bridged polygermsesquioxanes. Organically modified germanium oxide materials

    SciTech Connect (OSTI)

    Jamison, G.M.; Loy, D.A. (Sandia National Labs., Albuquerque, NM (United States)); Shea, K.J. (Univ. of California, Irvine, CA (United States))

    1993-09-01

    Sol-gel processed polysilsesquioxanes are hybrid organic-inorganic materials with potential applications as photoresists, membranes, or catalytic supports. Hydrolytic conversion of trichloro- or trialkoxysilanes often leads to amorphous or crystalline oligosilsesquioxanes instead of high polymers. In light of the intimate dependence of polysilsesquioxane properties of tightly controlled reaction conditions and processing, recent emphasis has been placed on control of polymer microarchitecture via the introduction of arylene-, acetylene-, and alkylene-bridging groups. Another strategy for modifying the properties of hybrid organic-inorganic polymers is to substitute a group IVA metal, such as germanium, for silicon. The authors report the synthesis and characterization of bifunctional hexylene-bridged organogermanium monomers X[sub 3]Ge-(CH[sub 2])[sub 6]GeX[sub 3] (X = Cl; OEt) and the formation of polymeric materials through sol-gel hydrolysis-condensation of the monomers. 15 refs., 2 figs.

  18. Sex, Size and Gender Roles evolutionary studies of sexual size dimorphism

    E-Print Network [OSTI]

    Saltzman, Wendy

    , John L. Gittleman and Kate E. Jones 3. Sexual Size Dimorphism in Birds , Tamás Székely, Terje Lislevand in the Hartebeest, Isabella Capellini 13. Sexual Size Dimorphism and Offspring Vulnerability in Birds, EllenSex, Size and Gender Roles evolutionary studies of sexual size dimorphism Edited by Daphne J

  19. Characterization, sintering and dielectric properties of nanocrystalline barium titanate synthesized through a modified combustion process

    SciTech Connect (OSTI)

    George, C.N. [Department of Physics, Bishop Moore College, Mavelikara, Kerala (India); Thomas, J.K. [Department of Physics, Mar Ivanios College, Thiruvananthapuram, Kerala (India)], E-mail: jkthomasemrl@gmail.com; Kumar, H.P.; Suresh, M.K. [Department of Physics, Mar Ivanios College, Thiruvananthapuram, Kerala (India); Kumar, V.R.; Wariar, P.R.S. [Department of Physics, University College, Thiruvananthapuram, Kerala (India); Jose, R. [Nanoscience and Nanotechnology Initiative, National University of Singapore (Singapore); Koshy, J. [Department of Physics, Bishop Moore College, Mavelikara, Kerala (India)

    2009-04-15

    Nanocrystalline barium titanate has been synthesized through a modified combustion process in a single step for the first time. The as-prepared barium titanate powder is cubic perovskite with lattice constant a = 4.018 A. The phase purity of the nanopowder was examined using thermo gravimetric analysis, differential thermal analysis and Fourier transform infrared spectroscopy. Transmission electron microscopic investigations have shown that the particle size of the as-prepared powder is in the range 20-40 nm. The agglomerate size distribution of the as-prepared powder was studied using atomic force microscopy. The nanoparticles of barium titanate were sintered to 97% of the theoretical density at a temperature of 1350 deg. C for 3 h. The microstructure of the sintered surface was examined using scanning electron microscopy. The dielectric constant and loss factor of the sintered pellets at 1 MHz measured at room temperature were 1223 and 3.5 x 10{sup -3} respectively.

  20. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    Conference Conference Presented at Compound Nuclear Reactions and Related Topics Fish Camp CA United States Oct Oct Medium ED Size PDF file pages size Mbytes OSTI ID Legacy...

  1. High surface area neodymium phosphate nano particles by modified aqueous sol-gel method

    SciTech Connect (OSTI)

    Sankar, Sasidharan [Materials Division, National Institute for Interdisciplinary Science and Technology, Council of Scientific and Industrial Research, Thiruvananthapuram 695 019, Kerala (India)] [Materials Division, National Institute for Interdisciplinary Science and Technology, Council of Scientific and Industrial Research, Thiruvananthapuram 695 019, Kerala (India); Warrier, Krishna Gopakumar, E-mail: wwarrierkgk@yahoo.co.in [Materials Division, National Institute for Interdisciplinary Science and Technology, Council of Scientific and Industrial Research, Thiruvananthapuram 695 019, Kerala (India); Komban, Rajesh [Institut fuer Chemie, Anorganische Chemie 1, Universitaet Osnabrueck, Barbarastrasse 7, 49069 Osnabrueck (Germany)] [Institut fuer Chemie, Anorganische Chemie 1, Universitaet Osnabrueck, Barbarastrasse 7, 49069 Osnabrueck (Germany)

    2011-12-15

    Graphical abstract: Synthesis of nano rod shaped neodymium phosphate particles with specific surface area as high as 107 m{sup 2} g{sup -1} and particles could be compacted and sintered at as low as 1300 Degree-Sign C to a density of 98.5% (theoretical) with an average grain size of {approx}1 {mu}m. Highlights: Black-Right-Pointing-Pointer Nano size neodymium phosphate is synthesized and characterized using a novel modified aqueous sol gel process. Black-Right-Pointing-Pointer Specific surface area above 100 m{sup 2} g{sup -1} achieved without the addition of any complexing agents. Black-Right-Pointing-Pointer High sintered density reported than the density obtained for powder synthesized through conventional solid state reaction. Black-Right-Pointing-Pointer The particles are nano sized and have rod shape morphology and are retained at higher temperatures. Black-Right-Pointing-Pointer An average grain size of {approx}1 {mu}m obtained for sintered NdPO{sub 4} after thermal etching at 1400 Degree-Sign C. -- Abstract: Synthesis of nano rod shaped neodymium phosphate (NdPO{sub 4}) particles with specific surface area as high as 107 m{sup 2}g{sup -1} and an average length of 50 nm with aspect ratio 5 was achieved using modified sol gel method. Crystallite size calculated from the X-ray diffraction data by applying Scherer equation was 5 nm for the precursor gel after calcination at 400 Degree-Sign C. NdPO{sub 4} was first precipitated from neodymium nitrate solution using phosphoric acid followed by peptization using dilute nitric acid and further gelation in ammonia atmosphere. The calcined gel powders were further characterized by surface area (Brunauer-Emmet-Teller nitrogen adsorption analysis), Transmission electron microscopy, scanning electron microscopy, UV-vis and FT-IR analysis. Transmission electron microscopy confirms the formation of rod like morphology from the sol, gel and the calcined particles in nano size range. These particles could be compacted and sintered at as low as 1300 Degree-Sign C to a density of 98.5% (theoretical) with an average grain size of {approx}1 {mu}m.

  2. On measures of size for convex cones

    E-Print Network [OSTI]

    2015-05-18

    Section 2 presents a battery of examples of size indices disseminated in the literature. For each ...... ferent measures of conditioning for conic linear systems.

  3. Interfacial Studies of Sized Carbon Fiber

    SciTech Connect (OSTI)

    Shahrul, S. N.; Hartini, M. N.; Hilmi, E. A.; Nizam, A. [Nanomaterials Program, Advance Materials Centre (AMREC), SIRIM Berhad, Lot 34, Jalan Hi-Tech Park, 09000, Kulim, Kedah (Malaysia)

    2010-03-11

    This study was performed to investigate the influence of sizing treatment on carbon fiber in respect of interfacial adhesion in composite materials, Epolam registered 2025. Fortafil unsized carbon fiber was used to performed the experiment. The fiber was commercially surface treated and it was a polyacrylonitrile based carbon fiber with 3000 filament per strand. Epicure registered 3370 was used as basic sizing chemical and dissolved in two types of solvent, ethanol and acetone for the comparison purpose. The single pull out test has been used to determine the influence of sizing on carbon fiber. The morphology of carbon fiber was observed by atomic force microscopy (AFM) and scanning electron microscopy (SEM). The apparent interfacial strength IFSS values determined by pull out test for the Epicure registered 3370/ethanol sized carbon fiber pointed to a good interfacial behaviour compared to the Epicure registered 3370/acetone sized carbon fiber. The Epicure registered 3370/ethanol sizing agent was found to be effective in promoting adhesion because of the chemical reactions between the sizing and Epolam registered 2025 during the curing process. From this work, it showed that sized carbon fiber using Epicure registered 3370 with addition of ethanol give higher mechanical properties of carbon fiber in terms of shear strength and also provided a good adhesion between fiber and matrix compared to the sizing chemical that contain acetone as a solvent.

  4. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    the experimental method and Free Precession Method descriptions and then experimental design elements ending with a summary A new nEDM experiment is under development with a...

  5. BSCProgramDescriptionDocumentJan2005.doc | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BSCProgramDescriptionDocumentJan2005.doc&0; More Documents & Publications Acquisition Guide Chapter 1.2 - Balanced Scorecard Performance Assessment Program - (March 2004)...

  6. New Mexico Hydrogen Fuels Challenge Program Description The New...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Mexico Hydrogen Fuels Challenge Program Description The New Mexico Hydrogen Fuels Challenge is an event that provides a hands-on opportunity for middle school students (grades...

  7. Microsoft Word - 338M_Geothermal_Project_Descriptions

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Location (City) Project Location (State) Description ORMAT Nevada, Inc. 4,911,330 Maui HI ORMAT Nevada will use a combination of technologies to locate fault zones within...

  8. Description of induced nuclear fission with Skyrme energy functionals...

    Office of Scientific and Technical Information (OSTI)

    content will become publicly available on March 24, 2016 Title: Description of induced nuclear fission with Skyrme energy functionals. II. Finite temperature effects Authors:...

  9. Description of induced nuclear fission with Skyrme energy functionals...

    Office of Scientific and Technical Information (OSTI)

    fragment properties Citation Details In-Document Search Title: Description of induced nuclear fission with Skyrme energy functionals: Static potential energy surfaces and fission...

  10. Descriptions of ESPC Task Order Schedules and Placement of Pricing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Document provides task order schedule descriptions and information on the placement of pricing for energy savings performance contracts (ESPCs). 54descriptionoftoschedulesj5....

  11. Mechanical and Electrical Properties of Modified Graphene Devices

    E-Print Network [OSTI]

    ZHANG, HANG

    2012-01-01

    works demonstrate that modified graphene structures providehttp://en.wikipedia.org/wiki/Graphene#Potential_applicationsin detail sample (graphene) preparation, localization and

  12. In-situ characterization of plasma modified surfaces by vibrational...

    Office of Scientific and Technical Information (OSTI)

    In-situ characterization of plasma modified surfaces by vibrational sum frequency generation spectroscopy. Citation Details In-Document Search Title: In-situ characterization of...

  13. Neutrino Flavor Ratios Modified by Cosmic Ray Re-acceleration

    E-Print Network [OSTI]

    Kawanaka, Norita

    2015-01-01

    Re-acceleration of $\\pi$'s and $\\mu$'s modifies the flavor ratio at Earth (at astrophysical sources) of neutrinos produced by $\\pi$ decay, $\

  14. Surface modified CFx cathode material for ultrafast discharge...

    Office of Scientific and Technical Information (OSTI)

    CFx. The modified CFx, consisting of an in situ generated shell component of F-graphene layers, possesses good electronic conductivity and removes the transporting barrier...

  15. Particlelike solutions in modified gravity: the Higgs monopole

    E-Print Network [OSTI]

    Sandrine Schlogel; Massimiliano Rinaldi; Francois Staelens; Andre Fuzfa

    2014-08-21

    Higgs inflation has received a remarkable attention in the last few years due to its simplicity and predictive power. The key point of this model is the nonminimal coupling to gravity in unitary gauge. As such, this theory is in fact a scalar-tensor modification of gravity that needs to be studied also below the energy scales of inflation. Motivated by this goal, we study in great analytical and numerical detail the static and spherically symmetric solutions of the equations of motion in the presence of standard baryonic matter, called "Higgs monopoles" and presented in 1305.2640. These particlelike solutions may arise naturally in tensor-scalar gravity with mexican hat potential and are the only globally regular asymptotically flat solutions with finite classical energy. In the case when the parameters of the potential are taken to be the ones of the standard model, we find that the deviations from general relativity are extremely small, especially for bodies of astrophysical size and density. This allows to derive a simplified description of the monopole, for which the metric inside the spherical matter distribution can be approximated by the standard metric of general relativity. We study how the properties of these monopoles depend on the strength of the nonminimal coupling to gravity and on the baryonic mass and compactness. An important and original result is the existence of a mechanism of resonant amplification of the Higgs field inside the monopole that comes into play for large nonminimal coupling. We show that this mechanism might degenerate into divergences of the Higgs field that reveal the existence of forbidden combinations of radius and baryonic energy density.

  16. Symplectic map description of Halley's comet dynamics

    E-Print Network [OSTI]

    G. Rollin; P. Haag; J. Lages

    2015-02-02

    The main features of 1P/Halley chaotic dynamics can be described by a two dimensional symplectic map. Using Mel'nikov integral we semi-analytically determine such a map for 1P/Halley taking into account gravitational interactions from the Sun and the eight planets. We determine the Solar system kick function ie the energy transfer to 1P/Halley along one passage through the Solar system. Our procedure allows to compute for each planet its contribution to the Solar system kick function which appears to be the sum of the Keplerian potential of the planet and of a rotating circular gravitational dipole potential due to the Sun movement around Solar system barycenter. We test the robustness of the symplectic Halley map by directly integrating Newton's equations over $\\sim 2.4\\cdot 10^4$ yr around Y2K and by reconstructing the Solar system kick function. Our results show that the Halley map with fixed parameters gives a reliable description of comet dynamics on time scales of $10^4$ yr while on a larger scales the parameters of the map are slowly changing due to slow oscillations of orbital momentum.

  17. Highly Charged Ion (HCI) Modified Tunnel Junctions

    SciTech Connect (OSTI)

    Pomeroy, J. M.; Grube, H. [Atomic Physics Division, National Institute of Standards and Technology (NIST) 100 Bureau Dr., MS 8423, Gaithersburg, MD 20899-8423 (United States)

    2009-03-10

    The neutralization energy carried by highly charged ions (HCIs) provides an alternative method for localizing energy on a target's surface, producing features and modifying surfaces with fluences and kinetic energy damage that are negligible compared to singly ionized atoms. Since each HCI can deposit an enormous amount of energy into a small volume of the surface (e.g., Xe{sup 44+} delivers 51 keV of neutralization energy per HCI), each individual HCI's interaction with the target can produce a nanoscale feature. Many studies of HCI-surface features have characterized some basic principles of this unique ion-surface interaction, but the activity reported here has been focused on studying ensembles of HCI features in ultra-thin insulating films by fabricating multi-layer tunnel junction devices. The ultra-thin insulating barriers allow current to flow by tunneling, providing a very sensitive means of detecting changes in the barrier due to highly charged ion irradiation and, conversely, HCI modification provides a method of finely tuning the transparency of the tunnel junctions that spans several orders of magnitude for devices produced from a single process recipe. Systematic variation of junction bias, temperature, magnetic field and other parameters provides determination of the transport mechanism, defect densities, and magnetic properties of these nano-features and this novel approach to device fabrication.

  18. Squibs and Discussions Pipelines and Size Constraints

    E-Print Network [OSTI]

    Squibs and Discussions Pipelines and Size Constraints Ehud Reiter* University of Aberdeen Some. This can be a difficult constraint to enforce in a pipelined natural language generation (NLG) system of the pipeline, but size cannot be accurately measured until the document has been completely processed

  19. A Description Logic Based Approach to Reasoning about Web Services

    E-Print Network [OSTI]

    Baader, Franz

    A Description Logic Based Approach to Reasoning about Web Services Franz Baader1 , Carsten Lutz1-founded and al- gorithmically managable formalisms for describing the func- tionality of Web services, we, which are important for Web service discovery and composition. 1. INTRODUCTION Description logics [3

  20. Visual Unit Analysis: A Descriptive Approach to Landscape Assessment1

    E-Print Network [OSTI]

    Visual Unit Analysis: A Descriptive Approach to Landscape Assessment1 R. J. Tetlow, and S. R. J are critical. The Visual Unit concept appears to offer a logical and useful framework for description and evaluation. The concept subdivides landscape into coherent, spatially-defined units. This study extends

  1. SEDIMENT DESCRIPTIONS R/V NATHANIEL B. PALMER

    E-Print Network [OSTI]

    #12;#12;SEDIMENT DESCRIPTIONS for R/V NATHANIEL B. PALMER Cruise 7, 1994 #12;#12;DESCRIPTIONS OF SEDIMENT RECOVERED BY THE R/V NATHANIEL B. PALMER, UNITED STATES ANTARCTIC PROGRAM CRUISE 7, 1994 Edited............................................................................................... 17 SEDIMENT CLASSIFICATION

  2. Database Description with SDM: A Semantic Database Model

    E-Print Network [OSTI]

    McLeod, Dennis

    Database Description with SDM: A Semantic Database Model MICHAEL HAMMER Massachusetts Institute of Technology and DENNIS McLEOD University of Southern California SDM is a high-level semantics-based database description and structuring formalism (database model) for databases. This database model is designed

  3. Descriptive Control Theory (student & postdoc, 2007 to next Friday)

    E-Print Network [OSTI]

    Clarke, Edmund M.

    Descriptive Control Theory Sicun Gao (student & postdoc, 2007 to next Friday) #12;Thank you, Ed] #12;We need a logical and computational "overhaul" of control theory that sets the foundation-critical systems. #12;Descriptive control theory aims to study · Computational complexity · Automated reasoning

  4. Banach Spaces and Descriptive Set Theory: Selected Topics

    E-Print Network [OSTI]

    Dodos, Pandelis

    Banach Spaces and Descriptive Set Theory: Selected Topics Pandelis Dodos #12;ii #12;Preface and their parameterized versions. The previous material is used in Chapter 7 which is, somehow, the goal of these notes of the "Handbook of the Geometry of Banach spaces" [JL1, JL2]. In the third appendix we give a short description

  5. UO{sub 3} plant turnover - facility description document

    SciTech Connect (OSTI)

    Clapp, D.A.

    1995-01-01

    This document was developed to provide a facility description for those portions of the UO{sub 3} Facility being transferred to Bechtel Hanford Company, Inc. (BHI) following completion of facility deactivation. The facility and deactivated state condition description is intended only to serve as an overview of the plant as it is being transferred to BHI.

  6. Manual of Leaf Architecture Morphological description and categorization

    E-Print Network [OSTI]

    Wilf, Peter

    - 1 - Manual of Leaf Architecture Morphological description and categorization of dicotyledonous reserved. Published and distributed by: Leaf Architecture Working Group c/o Scott Wing Department-9677554-0-9 Please cite as: Manual of Leaf Architecture - morphological description and categorization

  7. Description Logics as Ontology Languages for the Semantic Web

    E-Print Network [OSTI]

    Baader, Franz

    Description Logics as Ontology Languages for the Semantic Web Franz Baader 1 , Ian Horrocks 2. The vision of a Semantic Web has recently drawn consider- able attention, both from academia and industry. Description logics are often named as one of the tools that can support the Semantic Web and thus help to make

  8. INL Wind Farm Project Description Document

    SciTech Connect (OSTI)

    Gary Siefert

    2009-07-01

    The INL Wind Farm project proposes to install a 20 MW to 40 MW wind farm on government property, consisting of approximately ten to twenty full-sized (80-meter hub height) towers with 2 MW turbines, and access roads. This includes identifying the optimal turbine locations, building access roads, and pouring the tower foundations in preparation for turbine installation. The project successfully identified a location on INL lands with commercially viable wind resources (i.e., greater than 11 mph sustained winds) for a 20 to 40 MW wind farm. Additionally, the proposed Wind Farm was evaluated against other General Plant Projects, General Purpose Capital Equipment projects, and Line Item Construction Projects at the INL to show the relative importance of the proposed Wind Farm project.

  9. Modified LMS Algorithm for Unbiased Impulse Response Estimation

    E-Print Network [OSTI]

    So, Hing-Cheung

    Modified LMS Algorithm for Unbiased Impulse Response Estimation in Nonstationary Noise H. C. So and a modified least mean squares (LMS) algorithm is then developed for accurate system identification in noise, the least mean squares (LMS) algorithm [2], which is based on the minimum mean squared error (MMSE) crite

  10. Modified Advection-Aridity Model of Evapotranspiration Jozsef Szilagyi1

    E-Print Network [OSTI]

    Szilagyi, Jozsef

    Modified Advection-Aridity Model of Evapotranspiration Jozsef Szilagyi1 ; Michael T. Hobbins2 1979 proposed the advection-aridity AA model of regional evapotranspiration based on Bouchet's 1963 ; and Janos Jozsa3 Abstract: The original and modified versions of the advection-aridity AA model of regional

  11. Conglomeration of kilometre-sized planetesimals

    E-Print Network [OSTI]

    Shannon, Andrew; Wu, Yanqin; Lithwick, Yoram

    2015-02-25

    out of ? 104M? of primordial solids. The total disk mass, if supplemented with the missing hydro- gen gas, would then reach of order a solar mass. This is very surprising and, in our view, invalidates the low-efficiency conglomeration model. Moreover... . This corresponds to a dis- ruption velocity of v ? 100 cm/ s, or e ? 10?3 at 40 AU. When bodies of size s1 are catastrophically disrupted, we re-distribute their masses to smaller size bins with a number distribution that is power-law in size, dn/ds ? sq? for s < s...

  12. Finite size scaling analysis of compact QED

    E-Print Network [OSTI]

    G. Arnold; Th. Lippert; Th. Neuhaus; K. Schilling

    2000-11-13

    We describe results of a high-statistics finite size scaling analysis of 4d compact U(1) lattice gauge theory with Wilson action at the phase transition point. Using a multicanonical hybrid Monte Carlo algorithm we generate data samples with more than 150 tunneling events between the metastable states of the system, on lattice sizes up to 18^4. We performed a first analysis within the Borgs-Kotecky finite size scaling scheme. As a result, we report evidence for a first-order phase transition with a plaquette energy gap, G=0.02667(20), at a transition coupling, beta_T=1.011128(11).

  13. Waste Emplacement/Retrieval System Description Document

    SciTech Connect (OSTI)

    Eric Loros

    2001-07-25

    The Waste Emplacement/Retrieval System transports Waste Packages (WPs) from the Waste Handling Building (WHB) to the subsurface area of emplacement, and emplaces the WPs once there. The Waste Emplacement/Retrieval System also, if necessary, removes some or all of the WPs from the underground and transports them to the surface. Lastly, the system is designed to remediate abnormal events involving the portions of the system supporting emplacement or retrieval. During emplacement operations, the system operates on the surface between the WHB and North Portal, and in the subsurface in the North Ramp, access mains, and emplacement drifts. During retrieval or abnormal conditions, the operations areas may also extend to a surface retrieval storage site and South Portal on the surface, and the South Ramp in the subsurface. A typical transport and emplacement operation involves the following sequence of events. A WP is loaded into a WP transporter at the WHB, and coupled to a pair of transport locomotives. The locomotives transport the WP from the WHB, down the North Ramp, and to the entrance of an emplacement drift. Once docked at the entrance of the emplacement drift, the WP is moved outside of the WP transporter, and engaged by a WP emplacement gantry. The WP emplacement gantry lifts the WP, and transports it to its emplacement location, where the WP is then lowered to its final resting position. The WP emplacement gantry remains in the drift while the WP transporter is returned to the WHB by the locomotives. When the transporter reaches the WHB, the sequence of operations is repeated. Retrieval of all the WPs, or a large group of WPs, under normal conditions is achieved by reversing the emplacement operations. Retrieval of a small set of WPs, under normal or abnormal conditions, is known as recovery. Recovery performed under abnormal conditions will involve a suite of specialized equipment designed to perform a variety of tasks to enable the recovery process. Recovery after abnormal events may require clearing of equipment, rock, and ground support to facilitate recovery operations. Stabilization of existing ground support and installation of new ground support may also be needed. Recovery of WP(s) after an event that has contaminated drifts and/or WPs will require limiting the spread of contamination. Specialized equipment will also be necessary for system restoration (e.g., after a derailment, component failure). The Waste Emplacement/Retrieval System interfaces with the Subsurface Facility System and Ground Control System for the size and layout of the underground openings. The system interfaces with the Subsurface Ventilation System for the emplacement drift operating environment and the size of the drift isolation doors. The system interfaces with all WP types for the size, weight, and other important parameters affecting emplacement, recovery, and retrieval. The system interfaces with the Subsurface Emplacement Transportation System for the rail system upon which it operates and the distribution of power through the rail system. The system interfaces with the Monitored Geologic Repository (MGR) Operations Monitoring and Control System for the transmission of data to and from the system equipment, and for remote control of system equipment. The system interfaces with the Ground Control System for any repairs that are made. The system interfaces with the Emplacement Drift System for the WP emplacement mode and hardware. The system interfaces with the Disposal Container Handling System and the Waste Handling Building System for the receipt (during emplacement) and delivery (during retrieval/recovery) of WPs.

  14. Waste Emplacement/Retrieval System Description Document

    SciTech Connect (OSTI)

    NONE

    2000-10-12

    The Waste Emplacement/Retrieval System transports Waste Packages (WPs) from the Waste Handling Building (WHB) to the subsurface area of emplacement, and emplaces the WPs once there. The system also, if necessary, removes some or all of the WPs from the underground and transports them to the surface. Lastly, the system is designed to remediate abnormal events involving the portions of the system supporting emplacement or retrieval. During emplacement operations, the system operates on the surface between the WHB and North Portal, and in the subsurface in the North Ramp, access mains, and emplacement drifts. During retrieval or abnormal conditions, the operations areas may also extend to a surface retrieval storage site and South Portal on the surface, and the South Ramp in the subsurface. A typical transport and emplacement operation involves the following sequence of events. A WP is loaded into a WP transporter at the WHB, and coupled to a pair of transport locomotives. The locomotives transport the WP from the WHB, down the North Ramp, and to the entrance of an emplacement drift. Once docked at the entrance of the emplacment drift, the WP is moved outside of the WP transporter, and engaged by a WP emplacement gantry. The gantry lifts the WP, and transports it to its emplacement location, where the WP is then lowered to its final resting position. The gantry remains in the drift while the WP transporter is returned to the WHB by the locomotives. When the transporter reaches the WHB, the sequence of operations is repeated. Retrieval of all the WPs, or a large group of WPs, under normal conditions is achieved by reversing the emplacement operations. Retrieval of a small set of WPs, under normal or abnormal conditions, is known as recovery. Recovery performed under abnormal conditions will involve a suite of specialized equipment designed to perform a variety of tasks to enable the recovery process. Recovery after abnormal events may require clearing of equipment, rock, and ground support to facilitate recovery operations. Stabilization of existing ground support and installation of new ground support may also be needed. Recovery of WPs after an event that has contaminated drifts and/or WPs will require limiting the spread of contamination. Specialized equipment will also be necessary for system restoration. The system interfaces with the Subsurface Facility System and Ground Control System for the size and layout of the underground openings. The system interfaces with the Subsurface Ventilation System for the emplacement drift operating environment and the size of the drift isolation doors. The system interfaces with all WP types for the size, weight, and other important parameters affecting emplacement, recovery, and retrieval. The system interfaces with the Subsurface Emplacement Transportation System for the rail system upon which it operates and the distribution of power throuch the rail system. The system interfaces with the Monitored Geologic Repository (MGR) Operations Monitoring and Control System for the transmission of data to and from the system equipment, and for remote control of system equipment. The system interfaces with the Ground Control System for any repairs that are made. The system interfaces with the Emplacement Drift System for the WP emplacement mode and hardware. The system interfaces with the Disposal Container Handling System and the Waste Handling Building System for the receipt (during emplacement) and delivery (during retrieval/recovery) of WPs.

  15. Galactic Sun's motion in the Cold Dark Matter, MOdified Newtonian Dynamics and MOdified Gravity scenarios

    E-Print Network [OSTI]

    Lorenzo Iorio

    2009-08-19

    We numerically integrate the equations of motion of the Sun in Galactocentric Cartesian rectangular coordinates for -4.5 Gyr <= t <= 0 in Newtonian mechanics with two different models for the Cold Dark Matter (CDM) halo, in MOdified Newtonian Dynamics (MOND) and in MOdified Gravity (MOG) without resorting to CDM. The initial conditions used come from the latest kinematical determination of the 3D Sun's motion in the Milky Way (MW) by assuming for the rotation speed of the Local Standard of Rest (LSR) the recent value \\Theta_0=268 km s^-1 and the IAU recommended value \\Theta_0=220 km s^-1; the Sun is assumed located at 8.5 kpc from the Galactic Center (GC). For \\Theta_0=268 km s^-1 the birth of the Sun, 4.5 Gyr ago, would have occurred at large Galactocentric distances (12-27 kpc depending on the model used), while for \\Theta_0=220 km s^-1 it would have occurred at about 8.8-9.3 kpc for almost all the models used. The integrated trajectories are far from being circular, especially for \\Theta_0=268 km s^-1, and differ each other with the CDM models yielding the widest spatial extensions for the Sun's orbital path.

  16. Large Gap Size Paired-end Library Construction for Second Generation Sequencing

    SciTech Connect (OSTI)

    Peng, Ze; Hamilton, Matthew; Froula, Jeff; Ewing, Aren; Foster, Brian; Cheng, Jan-Fang

    2010-05-28

    Fosmid or BAC end sequencing plays an important role in de novo assembly of large genomes like fungi and plants. However construction and Sanger sequencing of fosmid or BAC libraries are laborious and costly. The current 454 Paired-End (PE) Library and Illumina Jumping Library construction protocols are limited with the gap sizes of approximately 20 kb and 8 kb, respectively. In the attempt to understand the limitations of constructing PE libraries with greater than 30Kb gaps, we have purified 18, 28, 45, and 65Kb sheared DNA fragments from yeast and circularized the ends using the Cre-loxP approach described in the 454 PE Library protocol. With the increasing fragment sizes, we found a general trend of decreasing library quality in several areas. First, redundant reads and reads containing multiple loxP linkers increase when the average fragment size increases. Second, the contamination of short distance pairs (<10Kb) increases as the fragment size increases. Third, chimeric rate increases with the increasing fragment sizes. We have modified several steps to improve the quality of the long span PE libraries. The modification includes (1) the use of special PFGE program to reduce small fragment contamination; (2) the increase of DNA samples in the circularization step and prior to the PCR to reduce redundant reads; and (3) the decrease of fragment size in the double SPRI size selection to get a higher frequency of LoxP linker containing reads. With these modifications we have generated large gap size PE libraries with a much better quality.

  17. Perihelion precession for modified Newtonian gravity

    SciTech Connect (OSTI)

    Schmidt, Hans-Juergen

    2008-07-15

    We calculate the perihelion precession {delta} for nearly circular orbits in a central potential V(r). Differently from other approaches to this problem, we do not assume that the potential is close to the Newtonian one. The main idea in the deduction is to apply the underlying symmetries of the system to show that {delta} must be a function of r{center_dot}V{sup ''}(r)/V{sup '}(r) and to use the transformation behavior of {delta} in a rotating system of reference. This is equivalent to say that the effective potential can be written in a one-parameter set of possibilities as the sum of centrifugal potential and potential of the central force. We get the following universal formula valid for V{sup '}(r)>0 reading {delta}(r)=2{pi}{center_dot}[(1/{radical}(3+r{center_dot}V{sup ''}(r)/V{sup '}(r)))-1]. It has to be read as follows: a circular orbit at this value r exists and is stable if and only if this {delta} is well-defined as real; and if this is the case, then the angular difference from one perihelion to the next one for nearly circular orbits at this r is exactly 2{pi}+{delta}(r). Then we apply this result to examples of recent interest like modified Newtonian gravity and linearized fourth-order gravity. In the second part of the paper, we generalize this universal formula to static spherically symmetric space-times ds{sup 2}=-e{sup 2{lambda}}{sup (r)}dt{sup 2}+e{sup 2{mu}}{sup (r)}dr{sup 2}+r{sup 2}d{omega}{sup 2}; for orbits near r it reads {delta}=2{pi}{center_dot}[(e{sup {mu}}{sup (r)}/{radical}(3-2r{center_dot}{lambda}{sup '}(r)+r{center_dot}{lambda}{sup ''}(r)/{lambda}{sup '}(r)))-1] and can be applied to a large class of theories. For the Schwarzschild black hole with mass parameter m>0 it leads to {delta}=2{pi}{center_dot}[(1/{radical}(1-(6m/r)))-1], a surprisingly unknown formula. It represents a strict result and is applicable for all values r>6m and is in good agreement with the fact that stable circular orbits exist for r>6m only. For r>>m, one can develop in powers of m and get the well-known approximation {delta}{approx_equal}(6{pi}m/r)

  18. Larger sized wire arrays on 1.5 MA Z-pinch generator

    SciTech Connect (OSTI)

    Safronova, A. S. Kantsyrev, V. L. Weller, M. E. Shlyaptseva, V. V. Shrestha, I. K. Esaulov, A. A. Stafford, A.; Chuvatin, A. S.; Coverdale, C. A.; Jones, B.

    2014-12-15

    Experiments on the UNR Zebra generator with Load Current Multiplier (LCM) allow for implosions of larger sized wire array loads than at standard current of 1 MA. Advantages of larger sized planar wire array implosions include enhanced energy coupling to plasmas, better diagnostic access to observable plasma regions, and more complex geometries of the wire loads. The experiments with larger sized wire arrays were performed on 1.5 MA Zebra with LCM (the anode-cathode gap was 1 cm, which is half the gap used in the standard mode). In particular, larger sized multi-planar wire arrays had two outer wire planes from mid-atomic-number wires to create a global magnetic field (gmf) and plasma flow between them. A modified central plane with a few Al wires at the edges was put in the middle between outer planes to influence gmf and to create Al plasma flow in the perpendicular direction (to the outer arrays plasma flow). Such modified plane has different number of empty slots: it was increased from 6 up to 10, hence increasing the gap inside the middle plane from 4.9 to 7.7 mm, respectively. Such load configuration allows for more independent study of the flows of L-shell mid-atomic-number plasma (between the outer planes) and K-shell Al plasma (which first fills the gap between the edge wires along the middle plane) and their radiation in space and time. We demonstrate that such configuration produces higher linear radiation yield and electron temperatures as well as advantages of better diagnostics access to observable plasma regions and how the load geometry (size of the gap in the middle plane) influences K-shell Al radiation. In particular, K-shell Al radiation was delayed compared to L-shell mid-atomic-number radiation when the gap in the middle plane was large enough (when the number of empty slots was increased up to ten)

  19. Particle Size Distribution of Gypseous Samples 

    E-Print Network [OSTI]

    Arnett, Morgan P.

    2010-01-16

    Particle size distribution (PSD) of gypseous soils is important in the soil science community. When gypsum constitutes a major portion of the soil, its removal prior to PSD analysis distorts the results and may lead to ...

  20. Control of gene expression by cell size

    E-Print Network [OSTI]

    Wu, Chia-Yung

    2010-01-01

    Polyploidy, increased copy number of whole chromosome sets in the genome, is a common cellular state in evolution, development and disease. Polyploidy enlarges cell size and alters gene expression, producing novel phenotypes ...

  1. Software Productivity Measurement Using Multiple Size Measures

    E-Print Network [OSTI]

    Bae, Doo-Hwan

    Software Productivity Measurement Using Multiple Size Measures Software Productivity MeasurementContents Introduction Background Related work Motivation Productivity measurement - Measurement model - Productivity measure construction - Productivity analysis Conclusion Discussion #12;Software Engineering Lab, KAIST 3

  2. Continuous Nanoparticle Sizing and Characterization via Microfluidics 

    E-Print Network [OSTI]

    Meng, Fanxu

    2015-04-27

    conductivity measurements can be exploited to instantaneously obtain size and species information in oxide nanoparticle suspensions. This approach is readily implemented in an easy to build platform that can be employed either online to provide real...

  3. Angular Size in a Static Universe

    E-Print Network [OSTI]

    David F. Crawford

    1994-07-11

    In principle the geometry of the universe can be investigated by measuring the angular size of known objects as a function of distance. Thus the distribution of angular sizes provides a critical test of the stable and static model of the universe described by Crawford (1991,1993) that has a simple and explicit relationship between the angular size of an object and its redshift. The result is that the agreement with observations of galactic diameters and the size of double radio sources with the static model is much better than the standard (Big Bang) theory without evolution. However there is still a small discrepancy at large redshifts that could be due to selection effects.

  4. Antiferromagnetic domain size and exchange bias 

    E-Print Network [OSTI]

    Fitzsimmons, M. R.; Lederman, D.; Cheon, M.; Shi, H.; Olamit, J.; Roshchin, Igor V.; Schuller, Ivan K.

    2008-01-01

    Using neutron diffraction, we measured the sizes of antiferromagnetic domains in three ferromagnet/antiferromagnet bilayer samples as a function of the magnitude and sign of exchange bias, temperature, and antiferromagnet composition. Neutron...

  5. Index of /~wilker/misc/Electronics

    E-Print Network [OSTI]

    Index of /~wilker/misc/Electronics. [ICO], Name · Last modified · Size · Description. [DIR], Parent Directory, -. [ ], dram.pdf, 11-Sep-1998 23:10, 124K. [ ] ...

  6. Index of /~lipman/papers-older/Other professional publications

    E-Print Network [OSTI]

    Index of /~lipman/papers-older/Other professional publications. [ICO], Name · Last modified · Size · Description. [DIR], Parent Directory, -. [ ], [1980] Review of ...

  7. Index of /~paola/pictures

    E-Print Network [OSTI]

    Index of /~paola/pictures. [ICO], Name · Last modified · Size · Description. [DIR], Parent Directory, -. [IMG], IM000060.jpg, 28-Aug-2003 17:54, 791K. [IMG] ...

  8. Dynamical description of the moments of the energy distribution of fission fragments and scission of a fissile nucleus

    SciTech Connect (OSTI)

    Borunov, M. V., E-mail: bmv@opsb.ru; Nadtochy, P. N.; Adeev, G. D. [Omsk State University (Russian Federation)

    2007-11-15

    A multidimensional stochastic approach to fission dynamics on the basis of three-dimensional Langevin equations is applied systematically to calculating the first four moments of the energy distribution of fission fragments over a broad range of Coulomb parameter values (700 < Z{sup 2}/A{sup 1/3} < 1700). For the scission of a fissile nucleus into fragments, use was made of various criteria traditional in modern fission theory: the vanishing of the neck radius at the scission instant and the equality of the neck radius to about 0.3R{sub 0} at this instant. In calculating the energy distribution, both of the criteria used lead to a fairly good description of experimental data on the first two moments and to a satisfactory description of data on the third and fourth moments of the distribution. However, the quality of the description of available experimental data is insufficiently good for giving preference to any of these criteria. Within three-dimensional Langevin dynamics, it is shown that the vanishing-radius criterion leads to unexpectably good agreement with experimental data on the first four moments of the energy distribution. A modified version of one-body dissipation where the coefficient that takes into account the reduction of the wall-formula contribution was set to k{sub s} = 0.25 was used in the calculations.

  9. Investigations of initiation spot size effects

    SciTech Connect (OSTI)

    Clarke, Steven A; Akinci, Adrian A; Leichty, Gary; Schaffer, Timothy; Murphy, Michael J; Munger, Alan; Thomas, Keith A

    2010-01-01

    As explosive components become smaller, a greater understanding of the effect of initiation spot size on detonation becomes increasingly critical. A series of tests of the effect of initiation spot size will be described. A series of DOI (direct optical initiation) detonators with initiation spots sizes from {approx}50 um to 1000um have been tested to determine laser parameters for threshold firing of low density PETN pressings. Results will be compared with theoretical predictions. Outputs of the initiation source (DOI ablation) have been characterized by a suite of diagnostics including PDV and schlieren imaging. Outputs of complete detonators have been characterized using PDV, streak, and/or schlieren imaging. At present, we have not found the expected change in the threshold energy to spot size relationship for DOI type detonators found in similar earlier for projectiles, slappers and EBWs. New detonators designs (Type C) are currently being tested that will allow the determination of the threshold for spot sizes from 250 um to 105um, where we hope to see change in the threshold vs. spot size relationship. Also, one test of an extremely small diameter spot size (50um) has resulted in preliminary NoGo only results even at energy densities as much as 8 times the energy density of the threshold results presented here. This gives preliminary evidence that 50um spot may be beyond the critical initiation diameter. The constant threshold energy to spot size relationship in the data to date does however still give some insight into the initiation mechanism of DOI detonators. If the DOI initiation mechanism were a 1D mechanism similar to a slapper or a flyer impact, the expected inflection point in the graph would have been between 300um and 500um diameter spot size, within the range of the data presented here. The lack of that inflection point indicates that the DOI initiation mechanism is more likely a 2D mechanism similar to a sphere or rod projectile. We expect to see a three region response as the results from the smaller spot size Type C detonators are completed.

  10. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    Modified Anti de Sitter Metric Light Front Quantized QCD and Conformal Quantum Mechanics Dosch Hans Gunter U Heidelberg ITP Brodsky Stanley J SLAC de Teramond Guy F Costa Rica U...

  11. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    are suggested based on a literature survey of the materials compatibility and proton irradiation tests Croloy modified Cr Mo and Cr Mo HT steel These materials seem to be used only...

  12. Optimal Multiple Description Transform Coding of Gaussian Vectors

    E-Print Network [OSTI]

    Goyal, Vivek K

    after the inception of information theory, techniques for source and chan- nel coding developed- ination of Shannon's result leads to the primary motivating factor for constructing joint source IEEE Includes minor corrections. Abstract Multiple description coding (MDC) is source coding

  13. Knowledge, Information and Data (KID) Track Track Description

    E-Print Network [OSTI]

    , classification, clustering, database management, data mining, digital libraries, electronic publishing, expert, XML, WWW, Web 2.0. Related areas include bioinformatics, library and information scienceKnowledge, Information and Data (KID) Track Track Description: This track focuses on the broad

  14. Shimadzu Center for Advanced Analytical Chemistry Instrument Description

    E-Print Network [OSTI]

    Chrzanowski, Thomas H.

    Shimadzu Center for Advanced Analytical Chemistry Instrument Description LCMS-8080 High PerformanceImagingandDocumentation Instrument Fall 2013 Allegra 25R Beckman Coulter Refrigerated Centrifuge Fall 2013 Center for Environmental

  15. Change Management in Heterogeneous Semistructured Databases (Demonstration Description) \\Lambda

    E-Print Network [OSTI]

    Chawathe, Sudarshan S.

    Change Management in Heterogeneous Semistructured Databases (Demonstration Description) \\Lambda the trigger should fire. At Stanford we are addressing the problem of change management in heterogeneous TDIFF CORE QSS Tsimmis Figure 1: Components of our change management system subscribers of changes

  16. Call Description cread highspeed, synchronous read from a CFS file

    E-Print Network [OSTI]

    Torczon, Virginia

    Call Description cread high­speed, synchronous read from a CFS file cwrite high­speed, synchronous write to a CFS file gilow global MIN operation used for integer scalars gopf make a global operation

  17. MECH 502: Advanced/Additive Manufacturing Engineering COURSE DESCRIPTION

    E-Print Network [OSTI]

    Connors, Daniel A.

    MECH 502: Advanced/Additive Manufacturing Engineering COURSE DESCRIPTION In this course you product development and innovation. You will develop a rich knowledge of additive manufacturing processes enabling advanced/additive manufacturing and personal fabrication. You will have the opportunity

  18. Description of the ARM Operational Objective Analysis System

    E-Print Network [OSTI]

    Zhang, Minghua

    ARM TR-005 Description of the ARM Operational Objective Analysis System June 2001 Minghua Zhang, ARM TR-005 iii Contents 1 Introduction .................................................................................................. 3 3 The Architecture of the ARM Operational Objective Analysis System

  19. Descriptive Quality Indicators Rating Scale for Single-case Design 

    E-Print Network [OSTI]

    Boles, Margot

    2015-04-08

    This table presents a rating scale for descriptive quality indicators in single-case research. This table is adapted from CEC (2014), Horner et al. (2005), and Reichow (2008)

  20. Nonparametric Multivariate Descriptive Measures Based on Spatial Quantiles

    E-Print Network [OSTI]

    Serfling, Robert

    Nonparametric Multivariate Descriptive Measures Based on Spatial Quantiles Robert Serfling1. Here we consider the multivariate context and utilize the "spatial quantiles", a recent vector introduce and study nonparametric measures of multivariate location, spread, skewness and kurtosis

  1. LATINO DESCRIPTIVE REPRESENTATION IN LOCAL PUBLIC OFFICE IN TEXAS 

    E-Print Network [OSTI]

    Holstein, Carlos 1983-

    2012-05-03

    This purpose of this study is to document and evaluate descriptive Latino representation at the local level, over time, and as it relates to characteristics of the Latino population. This study has important implications, particularly within...

  2. Hanford Site existing irradiated fuel storage facilities description

    SciTech Connect (OSTI)

    Willis, W.L.

    1995-01-11

    This document describes facilities at the Hanford Site which are currently storing spent nuclear fuels. The descriptions provide a basis for the no-action alternatives of ongoing and planned National Environmental Protection Act reviews.

  3. Generation of Web Service Descriptions and Web Service

    E-Print Network [OSTI]

    Generation of Web Service Descriptions and Web Service Module Implementation for Concept University of Science and Technology Software Systems Institute (STS) #12;Abstract Nowadays web services in order to initiate the communication. A web services endpoint communication interface utilizes

  4. Modifying Nanotubes Chemistry and Electronics of Carbon Nanotubes

    E-Print Network [OSTI]

    Joselevich, Ernesto

    Modifying Nanotubes Chemistry and Electronics of Carbon Nanotubes Go Together Ernesto Joselevich* Keywords: chemical reactivity · electronic structure · molecular electronics · nanotechnology · nanotubes) in nanoelectronics is the control of their electronic properties, which can be either metallic or semi- conducting

  5. Genetically modified food and crops: perceptions of risks 

    E-Print Network [OSTI]

    Hall, Clare R.

    2010-01-01

    The debate around genetically modified food and crops has proved to be complex and far-reaching, involving diverse stakeholder groups and many issues. Although the extent of global uptake of GM crops has been substantial ...

  6. Consistent description of kinetics and hydrodynamics of dusty plasma

    SciTech Connect (OSTI)

    Markiv, B.; Tokarchuk, M.; National University “Lviv Polytechnic,” 12 Bandera St., 79013 Lviv

    2014-02-15

    A consistent statistical description of kinetics and hydrodynamics of dusty plasma is proposed based on the Zubarev nonequilibrium statistical operator method. For the case of partial dynamics, the nonequilibrium statistical operator and the generalized transport equations for a consistent description of kinetics of dust particles and hydrodynamics of electrons, ions, and neutral atoms are obtained. In the approximation of weakly nonequilibrium process, a spectrum of collective excitations of dusty plasma is investigated in the hydrodynamic limit.

  7. Summary description of the Fast Flux Test Facility

    SciTech Connect (OSTI)

    Cabell, C.P.

    1980-12-01

    This document has been compiled and issued to provide an illustrated engineering summary description of the FFTF. The document is limited to a description of the plant and its functions, and does not cover the extensive associated programs that have been carried out in the fields of design, design analysis, safety analysis, fuels development, equipment development and testing, quality assurance, equipment fabrication, plant construction, acceptance testing, operations planning and training, and the like.

  8. Dynamical description of heavy-ion collisions at Fermi energies

    E-Print Network [OSTI]

    Napolitani, P

    2015-01-01

    Descriptions of heavy-ion collisions at Fermi energies require to take into account in-medium dissipation and phase-space fluctuations. The interplay of these correlations with the one-body collective behaviour determines the properties (kinematics and fragment production) and the variety of mechanisms (from fusion to neck formation and multifragmentation) of the exit channel. Starting from fundamental concepts tested on nuclear matter, we build up a microscopic description which addresses finite systems and applies to experimental observables.

  9. Enhancing Protein-Resistance of PEO-Modified Biomaterials 

    E-Print Network [OSTI]

    Murthy, Ranjini

    2010-01-16

    -RESISTANCE OF PEO-MODIFIED BIOMATERIALS A Dissertation by RANJINI MURTHY Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY May 2009 Major... Subject: Materials Science and Engineering ENHANCING PROTEIN-RESISTANCE OF PEO-MODIFIED BIOMATERIALS A Dissertation by RANJINI MURTHY Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment...

  10. Method for modifying trigger level for adsorber regeneration

    DOE Patents [OSTI]

    Ruth, Michael J.; Cunningham, Michael J.

    2010-05-25

    A method for modifying a NO.sub.x adsorber regeneration triggering variable. Engine operating conditions are monitored until the regeneration triggering variable is met. The adsorber is regenerated and the adsorbtion efficiency of the adsorber is subsequently determined. The regeneration triggering variable is modified to correspond with the decline in adsorber efficiency. The adsorber efficiency may be determined using an empirically predetermined set of values or by using a pair of oxygen sensors to determine the oxygen response delay across the sensors.

  11. Solar System experiments do not yet veto modified gravity models

    E-Print Network [OSTI]

    Valerio Faraoni

    2006-07-05

    The dynamical equivalence between modified and scalar-tensor gravity theories is revisited and it is concluded that it breaks down in the limit to general relativity. A gauge-independent analysis of cosmological perturbations in both classes of theories lends independent support to this conclusion. As a consequence, the PPN formalism of scalar-tensor gravity and Solar System experiments do not veto modified gravity, as previously thought.

  12. The Market Effect of a Food Scare: The Case of Genetically Modified StarLink Corn

    E-Print Network [OSTI]

    Carter, Colin A.; Smith, Aaron

    2004-01-01

    risk from genetically modified (GM) food. We analyze theof a Food Scare: The Case of Genetically Modified StarLinkof a Food Scare: The Case of Genetically Modified StarLink

  13. Control of pore size in epoxy systems.

    SciTech Connect (OSTI)

    Sawyer, Patricia Sue; Lenhart, Joseph Ludlow (North Dakota State University, Fargo, ND); Lee, Elizabeth (North Dakota State University, Fargo, ND); Kallam, Alekhya (North Dakota State University, Fargo, ND); Majumdar, Partha (North Dakota State University, Fargo, ND); Dirk, Shawn M.; Gubbins, Nathan; Chisholm, Bret J. (North Dakota State University, Fargo, ND); Celina, Mathias Christopher; Bahr, James (North Dakota State University, Fargo, ND); Klein, Robert J.

    2009-01-01

    Both conventional and combinatorial approaches were used to study the pore formation process in epoxy based polymer systems. Sandia National Laboratories conducted the initial work and collaborated with North Dakota State University (NDSU) using a combinatorial research approach to produce a library of novel monomers and crosslinkers capable of forming porous polymers. The library was screened to determine the physical factors that control porosity, such as porogen loading, polymer-porogen interactions, and polymer crosslink density. We have identified the physical and chemical factors that control the average porosity, pore size, and pore size distribution within epoxy based systems.

  14. Can amphiphile architecture directly control vesicle size?

    E-Print Network [OSTI]

    M. J. Greenall; C. M. Marques

    2013-01-28

    Bilayer membranes self-assembled from simple amphiphiles in solution always have a planar ground-state shape. This is a consequence of several internal relaxation mechanisms of the membrane and prevents the straightforward control of vesicle size. Here, we show that this principle can be circumvented and that direct size control by molecular design is a realistic possibility. Using coarse-grained calculations, we design tetrablock copolymers that form membranes with a preferred curvature, and demonstrate how to form low-polydispersity vesicles while suppressing micellization.

  15. Graphene Modified LiFePO4 Cathode Materials for High Power Lithium ion Batteries

    SciTech Connect (OSTI)

    Zhou, X.; Wang, F.; Zhu, Y.; Liu, Z.

    2011-01-24

    Graphene-modified LiFePO{sub 4} composite has been developed as a Li-ion battery cathode material with excellent high-rate capability and cycling stability. The composite was prepared with LiFePO{sub 4} nanoparticles and graphene oxide nanosheets by spray-drying and annealing processes. The LiFePO{sub 4} primary nanoparticles embedded in micro-sized spherical secondary particles were wrapped homogeneously and loosely with a graphene 3D network. Such a special nanostructure facilitated electron migration throughout the secondary particles, while the presence of abundant voids between the LiFePO{sub 4} nanoparticles and graphene sheets was beneficial for Li{sup +} diffusion. The composite cathode material could deliver a capacity of 70 mAh g{sup -1} at 60C discharge rate and showed a capacity decay rate of <15% when cycled under 10C charging and 20C discharging for 1000 times.

  16. Photoresponsive Release from Azobenzene-Modified Single Cubic Crystal NaCl/Silica Particles

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Jiang, Xingmao; Liu, Nanguo; Assink, Roger A.; Jiang, Yingbing; Brinker, C. Jeffrey

    2011-01-01

    Azobenzene ligands were uniformly anchored to the pore surfaces of nanoporous silica particles with single crystal NaCl using 4-(3-triethoxysilylpropylureido)azobenzene (TSUA). The functionalization delayed the release of NaCl significantly. The modified particles demonstrated a photocontrolled release by trans/cis isomerization of azobenzene moieties. The addition of amphiphilic solvents, propylene glycol (PG), propylene glycol propyl ether (PGPE), and dipropylene glycol propyl ether (DPGPE) delayed the release in water, although the wetting behavior was improved and the delay is the most for the block molecules with the longest carbon chain. The speedup by UV irradiation suggests a strong dependence of diffusion on the switchablemore »pore size. TGA, XRD, FTIR, and NMR techniques were used to characterize the structures.« less

  17. Perspectives of people in Mali toward genetically-modified mosquitoes for malaria control

    E-Print Network [OSTI]

    Marshall, John M; Touré, Mahamoudou B; Traore, Mohamed M; Famenini, Shannon; Taylor, Charles E

    2010-01-01

    vector Anopholes gambiae, in Mali, West Africa. GeneticsPerspectives of people in Mali toward genetically-modifiedPerspectives of people in Mali toward genetically-modified

  18. Modified T4 Lysozyme Fusion Proteins Facilitate G Protein-Coupled...

    Office of Scientific and Technical Information (OSTI)

    Modified T4 Lysozyme Fusion Proteins Facilitate G Protein-Coupled Receptor Crystallogenesis Citation Details In-Document Search Title: Modified T4 Lysozyme Fusion Proteins...

  19. Mining Building Energy Management System Data Using Fuzzy Anomaly Detection and Linguistic Descriptions

    SciTech Connect (OSTI)

    Dumidu Wijayasekara; Ondrej Linda; Milos Manic; Craig Rieger

    2014-08-01

    Building Energy Management Systems (BEMSs) are essential components of modern buildings that utilize digital control technologies to minimize energy consumption while maintaining high levels of occupant comfort. However, BEMSs can only achieve these energy savings when properly tuned and controlled. Since indoor environment is dependent on uncertain criteria such as weather, occupancy, and thermal state, performance of BEMS can be sub-optimal at times. Unfortunately, the complexity of BEMS control mechanism, the large amount of data available and inter-relations between the data can make identifying these sub-optimal behaviors difficult. This paper proposes a novel Fuzzy Anomaly Detection and Linguistic Description (Fuzzy-ADLD) based method for improving the understandability of BEMS behavior for improved state-awareness. The presented method is composed of two main parts: 1) detection of anomalous BEMS behavior and 2) linguistic representation of BEMS behavior. The first part utilizes modified nearest neighbor clustering algorithm and fuzzy logic rule extraction technique to build a model of normal BEMS behavior. The second part of the presented method computes the most relevant linguistic description of the identified anomalies. The presented Fuzzy-ADLD method was applied to real-world BEMS system and compared against a traditional alarm based BEMS. In six different scenarios, the Fuzzy-ADLD method identified anomalous behavior either as fast as or faster (an hour or more), that the alarm based BEMS. In addition, the Fuzzy-ADLD method identified cases that were missed by the alarm based system, demonstrating potential for increased state-awareness of abnormal building behavior.

  20. Distribution of maximal clique size of the vertices for theoretical small-world networks and real-world networks

    E-Print Network [OSTI]

    Meghanathan, Natarajan

    2015-01-01

    Our primary objective in this paper is to study the distribution of the maximal clique size of the vertices in complex networks. We define the maximal clique size for a vertex as the maximum size of the clique that the vertex is part of and such a clique need not be the maximum size clique for the entire network. We determine the maximal clique size of the vertices using a modified version of a branch-and-bound based exact algorithm that has been originally proposed to determine the maximum size clique for an entire network graph. We then run this algorithm on two categories of complex networks: One category of networks capture the evolution of small-world networks from regular network (according to the wellknown Watts-Strogatz model) and their subsequent evolution to random networks; we show that the distribution of the maximal clique size of the vertices follows a Poisson-style distribution at different stages of the evolution of the small-world network to a random network; on the other hand, the maximal cl...

  1. Unwinding of circular helicoidal molecules versus size

    E-Print Network [OSTI]

    Marco Zoli

    2015-04-12

    The thermodynamical stability of a set of circular double helical molecules is analyzed by path integral techniques. The minicircles differ only in \\textit{i)} the radius and \\textit{ii)} the number of base pairs ($N$) arranged along the molecule axis. Instead, the rise distance is kept constant. For any molecule size, the computational method simulates a broad ensemble of possible helicoidal configurations while the partition function is a sum over the path trajectories describing the base pair fluctuational states. The stablest helical repeat of every minicircle is determined by free energy minimization. We find that, for molecules with $N$ larger than $100$, the helical repeat grows linearly with the size and the twist number is constant. On the other hand, by reducing the size below $100$ base pairs, the double helices sharply unwind and the twist number drops to one for $N=\\,20$. This is predicted as the minimum size for the existence of helicoidal molecules in the closed form. The helix unwinding appears as a strategy to release the bending stress associated to the circularization of the molecules.

  2. Grain-size distributions of tsunami sediments 

    E-Print Network [OSTI]

    Spencer, Sarah

    2011-08-08

    tsunamis, Chile 2010 and Peru 2008. The grain-size of the sediment from each tsunami was measured by two common techniques: sieving and digital particle counter. To interpret this real tsunami data, numerical and analytical analysis were used to simulate...

  3. NEEDS SIZE ADJUSTMENT 2 Perfect Chemistry

    E-Print Network [OSTI]

    Chapman, Michael S.

    NEEDS SIZE ADJUSTMENT #12;2 Perfect Chemistry 8 Starr Power 10 Balancing Act 14 A Rare Thing.B.A. EDitors Dee Metaj Jill Smith DEsigN Anderson McConaughy Design Co. WritErs Todd Schwartz Jill Smith Jim and friends. Please send correspondence to: Bridges Magazine sm-alum@ohsu.edu OHSU School of Medicine 3181 SW

  4. Strategic Petroleum Reserve: Analysis of size options

    SciTech Connect (OSTI)

    Not Available

    1990-02-01

    This report presents the results of the deliberations of the interagency group formed to study the costs and benefits of expanding the size of the SPR. The study concentrated on severe oil supply disruptions involving sharp reductions in world oil production that were 2 to 4 times larger than the largest 1970s interruption. The disruption sizes and estimated probability of occurrence of these scenarios were supplied by the CIA. The most critical part of the CIA's analysis was the assessment of likelihood of these cases occurring. The CIA approached the likelihood problem by combining an examination of past oil supply disruptions with qualitative analysis of important oil market and regional trends. The study group then used statistical techniques and probability distributions to synthesize the historical data with CIA evaluations of as yet unobserved events. The SPR size study assumed direct purchases of SPR oil and did not assume the use of alternative financing mechanisms. Members of the working group with foreign policy and national security responsibilities provided an in-depth review of strategic considerations affecting SPR size. A number of prior studies, some classified, have addressed the strategic importance and insurance value of the SPR to the US and its allies. The results of these studies have also been incorporated in the current effort. 10 refs., 5 figs.

  5. Improving Geologic and Engineering Models of Midcontinent Fracture and Karst-Modified Reservoirs Using New 3-D Seismic Attributes

    SciTech Connect (OSTI)

    Susan Nissen; Saibal Bhattacharya; W. Lynn Watney; John Doveton

    2009-03-31

    Our project goal was to develop innovative seismic-based workflows for the incremental recovery of oil from karst-modified reservoirs within the onshore continental United States. Specific project objectives were: (1) to calibrate new multi-trace seismic attributes (volumetric curvature, in particular) for improved imaging of karst-modified reservoirs, (2) to develop attribute-based, cost-effective workflows to better characterize karst-modified carbonate reservoirs and fracture systems, and (3) to improve accuracy and predictiveness of resulting geomodels and reservoir simulations. In order to develop our workflows and validate our techniques, we conducted integrated studies of five karst-modified reservoirs in west Texas, Colorado, and Kansas. Our studies show that 3-D seismic volumetric curvature attributes have the ability to re-veal previously unknown features or provide enhanced visibility of karst and fracture features compared with other seismic analysis methods. Using these attributes, we recognize collapse features, solution-enlarged fractures, and geomorphologies that appear to be related to mature, cockpit landscapes. In four of our reservoir studies, volumetric curvature attributes appear to delineate reservoir compartment boundaries that impact production. The presence of these compartment boundaries was corroborated by reservoir simulations in two of the study areas. Based on our study results, we conclude that volumetric curvature attributes are valuable tools for mapping compartment boundaries in fracture- and karst-modified reservoirs, and we propose a best practices workflow for incorporating these attributes into reservoir characterization. When properly calibrated with geological and production data, these attributes can be used to predict the locations and sizes of undrained reservoir compartments. Technology transfer of our project work has been accomplished through presentations at professional society meetings, peer-reviewed publications, Kansas Geological Survey Open-file reports, Master's theses, and postings on the project website: http://www.kgs.ku.edu/SEISKARST.

  6. Sizing and burn time measurements of micron-sized metal powders

    SciTech Connect (OSTI)

    Gill, Robert J.; Mohan, Salil; Dreizin, Edward L. [New Jersey Institute of Technology Newark, New Jersey 07102 (United States)

    2009-06-15

    Detailed ignition and combustion mechanisms are needed to develop optimized propellant and energetic formulations using micron-sized metal powders, such as aluminum. Combustion researchers have traditionally used relatively coarse metal particles to characterize the burn time dependence on particle size. However, measurements of burn times for particles below 10 {mu}m in diameter are still needed for aluminum powders and other metal fuels. The apparatus described here sizes the particles just before the ignition event, providing a direct correlation between individual particle size and its burn time. Two lasers were utilized: a 785 nm laser diode for sizing the particles and a 125 W CO{sub 2} laser for particle ignition. The particles crossed the 785 nm laser beam just before crossing the CO{sub 2} laser beam. The particle size was determined from the amplitude of the scattered 785 nm light pulse. The burn time was determined from the duration of the visible light emission produced from the ignited particle. The in situ measured particle size distributions compared well with the size distributions measured for the same powders by a commercial instrument using low angle laser light scattering. Our measurements with two nominally spherical aluminum powders, suggest that the burn times increase from 0.5 to {approx}2.5 ms as the particle diameters increase from 3 to 8 {mu}m.

  7. Surface plasmon standing waves on Ag nanorods: observations of finite size effects and size dependency

    E-Print Network [OSTI]

    Dunin-Borkowski, Rafal E.

    Surface plasmon standing waves on Ag nanorods: observations of finite size effects and size to have clear configuration of standing waves of the nanorod. The nm resolution of the electron probe standing wave on a string with fixed ends, we observed that the wavelength of the SP standing wave

  8. An instrument to measure extended particle size and velocity ranges in multiphase flows

    SciTech Connect (OSTI)

    Wood, C.P.; Hess, C.F.

    1995-12-31

    This paper describes a miniaturized particle sizing velocimeter developed and built by MetroLaser to measure the spatial and temporal distributions of particle size and velocity. The instrument is the first of its kind to utilize the pulse displacement technique (PDT) to measure particle size. PDT is based on the detection of scattered refraction and reflection pulses which sweep past a detector at different times as a particle traverses a narrow laser sheet. In conjunction with Mie scattering and a time-of-fight velocity measuring technique, the instrument provides detailed distributions of particle size from 2 {micro}m to 6,000 {micro}m in two optical configurations, and particle velocity from 0.5 m/s to 150 m/s. This paper summarizes the theoretical foundation of PDT which allows the calculation of particle diameter from various optical parameters such as refractive index and collection angle. An overview of the instrument is presented, followed by a brief description of the miniaturized optical probe. The processing of data is described and, lastly, the results of experimental studies are presented which verify the accuracy and versatility of the instrument.

  9. Ductile fracture toughness of modified A 302 grade B plate materials. Volume 2

    SciTech Connect (OSTI)

    McCabe, D.E.; Manneschmidt, E.T.; Swain, R.L.

    1997-02-01

    The objective of this work was to develop ductile fracture toughness data in the form of J-R curves for modified A 302 grade B plate materials typical of those used in fabricating reactor pressure vessels. A previous experimental study at Materials Engineering Associates (MEA) on one particular heat of A 302 grade B plate showed decreasing J-R curves with increased specimen thickness. This characteristic has not been observed in numerous tests made on the more recent production materials of A 533 grade B and A 508 class 2 pressure vessel steels. It was unknown if the departure from norm for the MEA material was a generic characteristic for all heats of A 302 grade B steels or just unique to that one particular plate. Seven heats of modified A 302 grade B steel and one heat of vintage A 533 grade B steel were provided to this project by the General Electric Company of San Jose, California. All plates were tested for chemical content, tensile properties, Charpy transition temperature curves, drop-weight nil-ductility transition (NDT) temperature, and J-R curves. Tensile tests were made in the three principal orientations and at four temperatures, ranging from room temperature to 550{degrees}F (288{degrees}C). Charpy V-notch transition temperature curves were obtained in longitudinal, transverse, and short transverse orientations. J-R curves were made using four specimen sizes (1/2T, IT, 2T, and 4T). None of the seven heats of modified A 302 grade showed size effects of any consequence on the J-R curve behavior. Crack orientation effects were present, but none were severe enough to be reported as atypical. A test temperature increase from 180 to 550{degrees}F (82 to 288{degrees}C) produced the usual loss in J-R curve fracture toughness. Generic J-R curves and mathematical curve fits to the same were generated to represent each heat of material. This volume is a compilation of all data developed.

  10. Waste receiving and processing plant control system; system design description

    SciTech Connect (OSTI)

    LANE, M.P.

    1999-02-24

    The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.

  11. Massive gravitational waves in Chern-Simons modified gravity

    SciTech Connect (OSTI)

    Myung, Yun Soo; Moon, Taeyoon E-mail: tymoon@inje.ac.kr

    2014-10-01

    We consider the nondynamical Chern-Simons (nCS) modified gravity, which is regarded as a parity-odd theory of massive gravity in four dimensions. We first find polarization modes of gravitational waves for ?=x/? in nCS modified gravity by using the Newman-Penrose formalism where the null complex tetrad is necessary to specify gravitational waves. We show that in the Newman–Penrose formalism, the number of polarization modes is one in addition to an unspecified ?{sub 4}, implying three degrees of freedom for ?=x/?. This compares with two for a canonical embedding of ?=t/?. Also, if one introduces the Ricci tensor formalism to describe a massive graviton arising from the nCS modified gravity, one finds one massive mode after making second-order wave equations, which is compared to five found from the parity-even Einstein–Weyl gravity.

  12. The kinetic Sunyaev-Zeldovich effect in modified gravity

    E-Print Network [OSTI]

    Bianchini, Federico

    2015-01-01

    We investigate the impact of modified theories of gravity on the kinetic Sunyaev-Zeldovich (kSZ) effect of the cosmic microwave background. We focus on a specific class of $f(R)$ models of gravity and compare their predictions for the kSZ power spectrum to that of the $\\Lambda$CDM model. We use a publicly available modified version of Halofit to properly include the nonlinear matter power spectrum of $f(R)$ in the modeling of the kSZ signal. We find that the well known modifications of the growth rate of structure in $f(R)$ can indeed induce sizable changes in the kSZ signal, which are more significant than the changes induced by modifications of the expansion history. We discuss prospects of using the kSZ signal as a complementary probe of modified gravity, giving an overview of assumptions and possible caveats in the modeling.

  13. Acidity characterization of a titanium and sulfate modified vermiculite

    SciTech Connect (OSTI)

    Hernandez, W.Y.; Centeno, M.A.; Odriozola, J.A.; Moreno, S.; Molina, R.

    2008-07-01

    A natural vermiculite has been modified with titanium and sulfated by the intercalation and impregnation method in order to optimize the acidity of the clay mineral, and characterization of samples were analyzed by X-ray fluorescence (XRF), X-ray diffraction (XRD), nitrogen adsorption isotherms, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and temperature programmed desorption with ammonia (TPD-NH{sub 3}). All the modified solids have a significantly higher number of acidic sites with respect to the parent material and in all of these, Broensted as well as Lewis acidity are identified. The presence of sulfate appears not to increase the number of acidic centers in the modified clay. For the materials sulfated with the intercalation method, it is observed that the strength of the acidic sites found in the material increases with the nominal sulfate/metal ratio. Nevertheless, when elevated quantities of sulfur are deposited, diffusion problems in the heptane reaction appear.

  14. Method of detecting luminescent target ions with modified magnetic microspheres

    DOE Patents [OSTI]

    Shkrob, Ilya A; Kaminski, Michael D

    2014-05-13

    This invention provides methods of using modified magnetic microspheres to extract target ions from a sample in order to detect their presence in a microfluidic environment. In one or more embodiments, the microspheres are modified with molecules on the surface that allow the target ions in the sample to form complexes with specific ligand molecules on the microsphere surface. In one or more embodiments, the microspheres are modified with molecules that sequester the target ions from the sample, but specific ligand molecules in solution subsequently re-extract the target ions from the microspheres into the solution, where the complexes form independent of the microsphere surface. Once the complexes form, they are exposed to an excitation wavelength light source suitable for exciting the target ion to emit a luminescent signal pattern. Detection of the luminescent signal pattern allows for determination of the presence of the target ions in the sample.

  15. ANALYSIS OF OUT OF DATE MCU MODIFIER LOCATED IN SRNL

    SciTech Connect (OSTI)

    Crawford, C.

    2014-10-22

    SRNL recently completed density measurements and chemical analyses on modifier samples stored in drums within SRNL. The modifier samples date back to 2008 and are in various quantities up to 40 gallons. Vendor information on the original samples indicates a shelf life of 5 years. There is interest in determining if samples that have been stored for more than the 5 year shelf life are still acceptable for use. The Modular Caustic Side Solvent Extraction Unit (MCU) Solvent component Cs-7SB [(2,2,3,3- tetraflouropropoxy)-3-(4-sec-butylphenoxy)-2-propanol, CAS #308362-88-1] is used as a diluent modifier to increase extractant solubility and provide physical characteristics necessary for diluent trimming.

  16. The modified equation for spinless particles and superalgebra

    SciTech Connect (OSTI)

    Sadeghi, J.; Rostami, M.; Sadeghi, Z.

    2013-09-15

    In this paper we consider modified wave equations for spinless particles in an external magnetic field. We consider 4-potentials which guarantee Lorentz' and Coulomb's conditions. The new variable for modified wave equation leads us to consider the associated Laguerre differential equation. We take advantage of the factorization method in Laguerre differential equation and solve the modified equation. In order to obtain the wave function, energy spectrum and its quantization, we will establish conditions for the orbital quantum number. We account such orbital quantum number and obtain the raising and lowering operators. If we want to have supersymmetry partners, we need to apply the shape invariance condition. This condition for the partner potential will help us find the limit of ? as ?=±?(l)

  17. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    Graphene resonators analysis and film transfer Suggs Maria E Abstract Not Provided Sandia National Laboratories USDOE United States English Technical Report Medium ED Size p OSTI...

  18. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    States USDOE United States English Journal Article Journal Name Biotechnology for Biofuels Journal Volume Journal Issue Medium ED Size Article No OSTI ID Legacy ID OSTI ID None...

  19. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    SLAC US DOE Office of Science DOE SC National Aeronautics and Space Administration NASA United States English Journal Article Journal Name Astrophysical Journal Medium ED Size...

  20. Real-Time Simultaneous Measurements of Size, Density, and Composition...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Simultaneous Measurements of Size, Density, and Composition of Single Ultrafine Diesel Tailpipe Particles Real-Time Simultaneous Measurements of Size, Density, and Composition of...

  1. Small- and Medium-Size Building Automation and Control System...

    Energy Savers [EERE]

    Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Emerging...

  2. SBA Increases Size Standards for Waste Remediation Services ...

    Office of Environmental Management (EM)

    review of all size standards for the next several years. An SBA-issued White Paper entitled, "Size Standards Methodology," which explains how SBA establishes, reviews...

  3. Reduce Pumping Costs Through Optimum Pipe Sizing | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reduce Pumping Costs Through Optimum Pipe Sizing Reduce Pumping Costs Through Optimum Pipe Sizing This tip sheet discusses how to reduce pumping system costs through optimum pipe...

  4. Overview of Detailed Chemical Speciation and Particle Sizing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Detailed Chemical Speciation and Particle Sizing for Diesel Exhaust, Both Real Time and Filter Based Measurements Overview of Detailed Chemical Speciation and Particle Sizing for...

  5. Baseline Concept Description of a Small Modular High Temperature Reactor

    SciTech Connect (OSTI)

    Hans Gougar

    2014-05-01

    The objective of this report is to provide a description of generic small modular high temperature reactors (herein denoted as an smHTR), summarize their distinguishing attributes, and lay out the research and development (R&D) required for commercialization. The generic concepts rely heavily on the modular high temperature gas-cooled reactor designs developed in the 1980s which were never built but for which pre-licensing or certification activities were conducted. The concept matured more recently under the Next Generation Nuclear Plant (NGNP) project, specifically in the areas of fuel and material qualification, methods development, and licensing. As all vendor-specific designs proposed under NGNP were all both ‘small’ or medium-sized and ‘modular’ by International Atomic Energy Agency (IAEA) and Department of Energy (DOE) standards, the technical attributes, challenges, and R&D needs identified, addressed, and documented under NGNP are valid and appropriate in the context of Small Modular Reactor (SMR) applications. Although the term High Temperature Reactor (HTR) is commonly used to denote graphite-moderated, thermal spectrum reactors with coolant temperatures in excess of 650oC at the core outlet, in this report the historical term High Temperature Gas-Cooled Reactor (HTGR) will be used to distinguish the gas-cooled technology described herein from its liquid salt-cooled cousin. Moreover, in this report it is to be understood that the outlet temperature of the helium in an HTGR has an upper limit of 950 degrees C which corresponds to the temperature to which certain alloys are currently being qualified under DOE’s ARC program. Although similar to the HTGR in just about every respect, the Very High Temperature Reactor (VHTR) may have an outlet temperature in excess of 950 degrees C and is therefore farther from commercialization because of the challenges posed to materials exposed to these temperatures. The VHTR is the focus of R&D under the Generation IV program and its specific R&D needs will be included in this report when appropriate for comparison. The distinguishing features of the HTGR are the refractory (TRISO) coated particle fuel, the low-power density, graphite-moderated core, and the high outlet temperature of the inert helium coolant. The low power density and fuel form effectively eliminate the possibility of core melt, even upon a complete loss of coolant pressure and flow. The graphite, which constitutes the bulk of the core volume and mass, provides a large thermal buffer that absorbs fission heat such that thermal transients occur over a timespan of hours or even days. As chemically-inert helium is already a gas, there is no coolant temperature or void feedback on the neutronics and no phase change or corrosion product that could degrade heat transfer. Furthermore, the particle coatings and interstitial graphite retain fission products such that the source terms at the plant boundary remain well below actionable levels under all anticipated nominal and off-normal operating conditions. These attributes enable the reactor to supply process heat to a collocated industrial plant with negligible risk of contamination and minimal dynamic coupling of the facilities (Figure 1). The exceptional retentive properties of coated particle fuel in a graphite matrix were first demonstrated in the DRAGON reactor, a European research facility that began operation in 1964.

  6. Baseline Concept Description of a Small Modular High Temperature Reactor

    SciTech Connect (OSTI)

    Gougar, Hans D.

    2014-10-01

    The objective of this report is to provide a description of generic small modular high temperature reactors (herein denoted as an smHTR), summarize their distinguishing attributes, and lay out the research and development (R&D) required for commercialization. The generic concepts rely heavily on the modular high temperature gas-cooled reactor designs developed in the 1980s which were never built but for which pre-licensing or certification activities were conducted. The concept matured more recently under the Next Generation Nuclear Plant (NGNP) project, specifically in the areas of fuel and material qualification, methods development, and licensing. As all vendor-specific designs proposed under NGNP were all both ‘small’ or medium-sized and ‘modular’ by International Atomic Energy Agency (IAEA) and Department of Energy (DOE) standards, the technical attributes, challenges, and R&D needs identified, addressed, and documented under NGNP are valid and appropriate in the context of Small Modular Reactor (SMR) applications. Although the term High Temperature Reactor (HTR) is commonly used to denote graphite-moderated, thermal spectrum reactors with coolant temperatures in excess of 650oC at the core outlet, in this report the historical term High Temperature Gas-Cooled Reactor (HTGR) will be used to distinguish the gas-cooled technology described herein from its liquid salt-cooled cousin. Moreover, in this report it is to be understood that the outlet temperature of the helium in an HTGR has an upper limit of 950 degrees C which corresponds to the temperature to which certain alloys are currently being qualified under DOE’s ARC program. Although similar to the HTGR in just about every respect, the Very High Temperature Reactor (VHTR) may have an outlet temperature in excess of 950 degrees C and is therefore farther from commercialization because of the challenges posed to materials exposed to these temperatures. The VHTR is the focus of R&D under the Generation IV program and its specific R&D needs will be included in this report when appropriate for comparison. The distinguishing features of the HTGR are the refractory (TRISO) coated particle fuel, the low-power density, graphite-moderated core, and the high outlet temperature of the inert helium coolant. The low power density and fuel form effectively eliminate the possibility of core melt, even upon a complete loss of coolant pressure and flow. The graphite, which constitutes the bulk of the core volume and mass, provides a large thermal buffer that absorbs fission heat such that thermal transients occur over a timespan of hours or even days. As chemically-inert helium is already a gas, there is no coolant temperature or void feedback on the neutronics and no phase change or corrosion product that could degrade heat transfer. Furthermore, the particle coatings and interstitial graphite retain fission products such that the source terms at the plant boundary remain well below actionable levels under all anticipated nominal and off-normal operating conditions. These attributes enable the reactor to supply process heat to a collocated industrial plant with negligible risk of contamination and minimal dynamic coupling of the facilities (Figure 1). The exceptional retentive properties of coated particle fuel in a graphite matrix were first demonstrated in the DRAGON reactor, a European research facility that began operation in 1964.

  7. Range descriptions for the spherical mean Radon transform

    E-Print Network [OSTI]

    M. Agranovsky; P. Kuchment; E. T. Quinto

    2006-09-02

    The transform considered in the paper averages a function supported in a ball in $\\RR^n$ over all spheres centered at the boundary of the ball. This Radon type transform arises in several contemporary applications, e.g. in thermoacoustic tomography and sonar and radar imaging. Range descriptions for such transforms are important in all these areas, for instance when dealing with incomplete data, error correction, and other issues. Four different types of complete range descriptions are provided, some of which also suggest inversion procedures. Necessity of three of these (appropriately formulated) conditions holds also in general domains, while the complete discussion of the case of general domains would require another publication.

  8. Improving the Infra-red of Holographic Descriptions of QCD

    E-Print Network [OSTI]

    Nick Evans; Andrew Tedder; Tom Waterson

    2007-01-03

    A surprisingly good holographic description of QCD can be obtained from naive five dimensional gauge theory on a truncated AdS space. We seek to improve the infra-red description of QCD in such models by using a more sophisticated metric and an action derived from string theory duals of chiral symmetry breaking. Our metric is smooth into the infra-red and the chiral condensate is a prediction of the dynamics. The theory reproduces QCD meson data at the 10% level.

  9. Sample sizes for confidence limits for reliability.

    SciTech Connect (OSTI)

    Darby, John L.

    2010-02-01

    We recently performed an evaluation of the implications of a reduced stockpile of nuclear weapons for surveillance to support estimates of reliability. We found that one technique developed at Sandia National Laboratories (SNL) under-estimates the required sample size for systems-level testing. For a large population the discrepancy is not important, but for a small population it is important. We found that another technique used by SNL provides the correct required sample size. For systems-level testing of nuclear weapons, samples are selected without replacement, and the hypergeometric probability distribution applies. Both of the SNL techniques focus on samples without defects from sampling without replacement. We generalized the second SNL technique to cases with defects in the sample. We created a computer program in Mathematica to automate the calculation of confidence for reliability. We also evaluated sampling with replacement where the binomial probability distribution applies.

  10. Minimum length, extra dimensions, modified gravity and black hole remnants

    SciTech Connect (OSTI)

    Maziashvili, Michael

    2013-03-01

    We construct a Hilbert space representation of minimum-length deformed uncertainty relation in presence of extra dimensions. Following this construction, we study corrections to the gravitational potential (back reaction on gravity) with the use of correspondingly modified propagator in presence of two (spatial) extra dimensions. Interestingly enough, for r?0 the gravitational force approaches zero and the horizon for modified Schwarzschild-Tangherlini space-time disappears when the mass approaches quantum-gravity energy scale. This result points out to the existence of zero-temperature black hole remnants in ADD brane-world model.

  11. Modified Debye-Huckel Electron Shielding and Penetration Factor

    E-Print Network [OSTI]

    P. Quarati; A. M. Scarfone

    2007-09-24

    Screened potential, modified by non standard electron cloud distributions responsible for the shielding effect on fusion of reacting nuclei in astrophysical plasmas, is derived. The case of clouds with depleted tails in space coordinates is discussed. The modified screened potential is obtained both from statistical mechanics arguments based on fluctuations of the inverse of the Debye-Huckel radius and from the solution of a Bernoulli equation used in generalized statistical mechanics. Plots and tables useful in evaluating penetration probability at any energy are provided.

  12. ON THE SIZE, SHAPE, AND DENSITY OF DWARF PLANET MAKEMAKE

    SciTech Connect (OSTI)

    Brown, M. E.

    2013-04-10

    A recent stellar occultation by the dwarf planet Makemake provided an excellent opportunity to measure the size and shape of one of the largest objects in the Kuiper belt. The analysis of these results provided what were reported to be precise measurements of the lengths of the projected axes, the albedo, and even the density of Makemake, but these results were, in part, derived from qualitative arguments. We reanalyzed the occultation timing data using a quantitative statistical description, and, in general, found the previously reported results on the shape of Makemake to be unjustified. In our solution, in which we use our inference from photometric data that Makemake is being viewed nearly pole-on, we find a 1{sigma} upper limit to the projected elongation of Makemake of 1.02, with measured equatorial diameter of 1434 {+-} 14 km and a projected polar diameter of 1422 {+-} 14 km, yielding an albedo of 0.81{sup +0.01}{sub -0.02}. If we remove the external constraint on the pole position of Makemake, we find instead a 1{sigma} upper limit to the elongation of 1.06, with a measured equatorial diameter of 1434{sup +48}{sub -18} km and a projected polar diameter of 1420{sup +18}{sub -24} km, yielding an albedo of 0.81{sup +0.03}{sub -0.05}. Critically, we find that the reported measurement of the density of Makemake was based on the misapplication of the volatile retention models. A corrected analysis shows that the occultation measurements provide no meaningful constraint on the density of Makemake.

  13. Scaling of Seismic Memory with Earthquake Size

    E-Print Network [OSTI]

    Zheng, Zeyu; Tenenbaum, Joel; Podobnik, Boris; Stanley, H Eugene

    2011-01-01

    It has been observed that the earthquake events possess short-term memory, i.e. that events occurring in a particular location are dependent on the short history of that location. We conduct an analysis to see whether real-time earthquake data also possess long-term memory and, if so, whether such autocorrelations depend on the size of earthquakes within close spatiotemporal proximity. We analyze the seismic waveform database recorded by 64 stations in Japan, including the 2011 "Great East Japan Earthquake", one of the five most powerful earthquakes ever recorded which resulted in a tsunami and devastating nuclear accidents. We explore the question of seismic memory through use of mean conditional intervals and detrended fluctuation analysis (DFA). We find that the waveform sign series show long-range power-law anticorrelations while the interval series show long-range power-law correlations. We find size-dependence in earthquake auto-correlations---as earthquake size increases, both of these correlation beha...

  14. Nanoconfined catalytic Ångström-size motors

    E-Print Network [OSTI]

    Peter H. Colberg; Raymond Kapral

    2015-01-13

    Chemically-powered synthetic micron and nano-scale motors that propel themselves in solution are being intensively studied because of the wide range of potential applications that exploit their directed motion. Recent experiments have shown that, even on the molecular scale, small-molecule catalysts and single enzyme molecules exhibit properties that have been attributed to self-propulsion. Simulations of very small {\\AA}ngstr\\"om-size synthetic motors in bulk solution have shown similar effects. Applications of such small motors in the cell or in microfluidic devices require knowledge of how these motors interact with boundaries. Molecular dynamics is used to investigate the properties of {\\AA}ngstr\\"om-size synthetic chemically-powered motors confined between walls separated by distances of tens of nanometers. Evidence for strong structural ordering of the motors between the walls, which reflects the finite size of solvent molecules and depends on solvent exclusion forces, is provided. Dynamical properties, such as average motor velocity, orientational relaxation and mean square displacement, are anisotropic and depend on the distance from the walls. This research presents information needed for potential applications that use these motors in the complex confined geometries encountered in biology and the laboratory.

  15. Effect of optically modified polyethylene terephthalate fiber socks on chronic foot pain

    E-Print Network [OSTI]

    York, Robyn MB; Gordon, Ian L

    2009-01-01

    of optically modified polyethylene terephthalate fiber sockswhether socks made from polyethylene terephthalate (PET)

  16. Description of recommended non-thermal mixed waste treatment technologies: Version 1.0

    SciTech Connect (OSTI)

    1995-08-01

    This document contains description of the technologies selected for inclusions in the Integrated Nonthermal Treatment Systems (INTS) Study. The purpose of these descriptions is to provide a more complete description of the INTS technologies. It supplements the summary descriptions of candidate nonthermal technologies that were considered for the INTS.

  17. WEEK 1 DEADLINE DESCRIPTION: ME310 PROJECT 2 DR. C. ALEXANDER SIMPKINS

    E-Print Network [OSTI]

    Simpkins, Alex

    sketches, cad models, equations, code, pseudocode, etc. But you need to also provide a written description

  18. Address Lot Description 981 MADISON DR A PARKING LOT

    E-Print Network [OSTI]

    Arnold, Elizabeth A.

    Address Lot Description 981 MADISON DR A PARKING LOT 156 BLUESTONE DR A PARKING LOT EXTENDED 810 MADISON DR B PARKING LOT 897 UNIVERSITY BLVD C PARKING LOT 1170 HARRISON ST C1 PARKING LOT 1161 HARRISON ST C2 PARKING LOT 761 DUKE DRIVE C3 PARKING LOT 441 MARTIN LUTHER KING JR WAY C4 PARKING LOT 650 DUKE

  19. Analyzing Software Architecture Descriptions to Generate Systemlevel Tests 1

    E-Print Network [OSTI]

    Offutt, Jeff

    externally­defined test cases. 2 Issues in Software Architecture­based Testing Although there are differencesAnalyzing Software Architecture Descriptions to Generate System­level Tests 1 Aynur Abdurazik y (ADLs) represent a significant opportunity for dealing with the issue of scale with respect to testing

  20. DRAFT DRAFT Electricity and Natural Gas Sector Description

    E-Print Network [OSTI]

    DRAFT DRAFT Electricity and Natural Gas Sector Description For Public Distribution AB 32 Scoping of electricity and natural gas; including electricity generation, combined heat and power, and electricity and natural gas end uses for residential and commercial purposes. Use of electricity and/or gas for industrial

  1. POSITION: Electrical Engineer / Full Time / Entry Level JOB DESCRIPTION

    E-Print Network [OSTI]

    Salvaggio, Carl

    POSITION: Electrical Engineer / Full Time / Entry Level JOB DESCRIPTION: Due to Control Chief Corporation's continued growth we have a vacancy for an entry level Electrical Engineer to work in our educated engineering candidate with a 4-year degree in Electrical Engineering, Electrical Engineering

  2. Mining Search-Phrase Definitions from Item Descriptions

    E-Print Network [OSTI]

    Davulcu, Hasan

    and item's information. For example, if a web page mentions "stable lightweight shoes", a smart algorithm". Our work attempts to bridge this gap, in the context of highly descriptive and data rich product such as "running shoes". In order to bridge this gap, we need to substitute original search phrase

  3. Formalizing Style to Understand Descriptions of Software Architecture

    E-Print Network [OSTI]

    of interaction between those components, global system properties (such as throughput and latency), and life­cycleFormalizing Style to Understand Descriptions of Software Architecture Gregory Abowd Robert Allen of Software Architecture,'' Proc. SIGSOFT'93: Foundations of Software Engineering, December 1993. Abstract

  4. OSU Agricultural Composting Workshop Day 1 Title Description

    E-Print Network [OSTI]

    Tullos, Desiree

    OSU Agricultural Composting Workshop Day 1 Title Description 8:30 Registration 9:00 Welcome; provide handouts; form work groups 9:30 The composting process Stages of composting; composting methods; composting parameters (temperature, moisture, C/N ratio, pH, micro-organisms, etc.); what should I compost

  5. Studying Relationships Between Human Gaze, Description, and Computer Vision

    E-Print Network [OSTI]

    Berg, Tamara L.

    . In this paper we provide a glimpse into this exciting future by analyzing how humans interact with vi- sualStudying Relationships Between Human Gaze, Description, and Computer Vision Kiwon Yun1 , Yifan Peng Department of Psychology Stony Brook University, Stony Brook, NY 11794, USA {kyun, yipeng, samaras, tlberg

  6. Rutgers Newark Oral History Project Intern Job Description

    E-Print Network [OSTI]

    Delgado, Mauricio

    uses cutting-edge technology to bring groundbreaking oral history collections to a worldwide audienceRutgers Newark Oral History Project Intern Job Description The Rutgers Newark Oral History Project-American Oral History Collection. Interns will be trained on the InterClipper software program to segment

  7. Deriving Semantic Knowledge from Descriptive Texts using an MT System

    E-Print Network [OSTI]

    Spirtes, Peter

    , instantiating concepts in an upper model for the electric power domain. In an extension of the basic system, we statements for entry into the Ontology Works electrical power factbase [9]. The system was extended to allow and textual description for a model of the North­ west electric power grid [10]. A set of texts were written

  8. Description: Lithium batteries are used daily in our work

    E-Print Network [OSTI]

    Description: Lithium batteries are used daily in our work activities from flashlights, cell phones containing one SureFire 3-volt non-rechargeable 123 lithium battery and one Interstate 3-volt non-rechargeable 123 lithium battery. A Garage Mechanic had the SureFire flashlight in his shirt pocket with the lens

  9. GENERATION OF TRANSITION CLASS MODELS FROM FORMAL QUEUEING NETWORK DESCRIPTIONS

    E-Print Network [OSTI]

    Strelen, Christoph

    stochastic Petri nets (GSPN), UltraSAN [8] for stochastic activity networks, a class of stochastic Petri netsGENERATION OF TRANSITION CLASS MODELS FROM FORMAL QUEUEING NETWORK DESCRIPTIONS Johann Christoph-mail: strelen@cs.uni-bonn.de KEYWORDS Queueing Networks, Tools, Multi-Paradigm Models, Gener- ation, Markov

  10. Cluster Report or Survey Description Date due to IEA Responsible

    E-Print Network [OSTI]

    Fernandez, Eduardo

    Cluster Report or Survey Description Date due to IEA Responsible person(s) Comments Reports IEA will activate and distribute survey in August 2011 Summer Activity Report Faculty activity report for summer, 2012 December 20, 2012 Academic Department Heads By October 8, 2012, data is provided by IEA

  11. NEW YORK UNIVERSITY : DESCRIPTION OF THE PROTEUS SYSTEM

    E-Print Network [OSTI]

    NEW YORK UNIVERSITY : DESCRIPTION OF THE PROTEUS SYSTEM AS USED FOR MUC-5 Ralph Grishman and John Sterling The Proteus Project Computer Science Department New York University 715 Broadway, 7th Floor New, previously developed an d still in use at New York University. The current system, including the Restriction

  12. An informal description of Standard OIL and Instance OIL

    E-Print Network [OSTI]

    Murawski, Andrzej

    An informal description of Standard OIL and Instance OIL 28 November 2000 Sean Bechhofer (1) Jeen to be specified in some language. This paper introduces the newest version of OIL ­ the ontology inference layer of the DAML language, with working name DAML-OIL, was proposed in a message to the rdf-logic mailing list

  13. EEE 463 Electrical Power Plants (3) [F] Course (Catalog) Description

    E-Print Network [OSTI]

    Zhang, Junshan

    . Environmental impact of electric generation (3 lectures) 9. Advanced energy conversion systems (geothermalEEE 463 Electrical Power Plants (3) [F] Course (Catalog) Description: Generation of electric power using fossil, nuclear and renewable, including solar, geothermal, wind, hydroelectric, biomass and ocean

  14. SPEAR fuel reliability code system. General description. [PWR; BWR

    SciTech Connect (OSTI)

    Christensen, R.

    1980-03-01

    A general description is presented for the SPEAR fuel reliability code system. Included is a discussion of the methodology employed and the structure of the code system, as well as discussion of the major components: the data preparation routines, the mechanistic fuel performance model, the mechanistic cladding failure model, and the statistical failure model.

  15. Description of isoscalar giant dipole resonance in nuclei 

    E-Print Network [OSTI]

    Pochivalov, Oleksiy Grigorievich

    2009-05-15

    Sm and 208Pb nuclei has been investigated. The existing Skyrme interactions SL1, SkM*, SGII, Sly4 and Sk255 were used. Hartree-Fock description of the ground state properties of all nuclei of interest was obtained using these Skyrme interactions...

  16. ECE 111 and 118 ENGINEERING DESIGN PROJECT DESCRIPTION FORM

    E-Print Network [OSTI]

    Fainman, Yeshaiahu

    . It is a decision-making process (often iterative), in which the basic sciences and mathematics and engineering, such as economic factors, safety, reliability, aesthetics, ethics, and social impact. (Electrical EngineeringECE 111 and 118 ENGINEERING DESIGN PROJECT DESCRIPTION FORM Specifications for the Design Course

  17. Technical descriptions of ten irrigation technologies for conserving energy

    SciTech Connect (OSTI)

    Harrer, B.J.; Wilfert, G.L.

    1983-05-01

    Technical description of ten technologies which were researched to save energy in irrigated agriculture are presented. These technologies are: well design and development ground water supply system optimization, column and pump redesign, variable-speed pumping, pipe network optimization, reduced-pressure center-pivot systems, low-energy precision application, automated gated-pipe system, computerized irrigation scheduling, and instrumented irrigation scheduling. (MHR)

  18. LABORATORY I: DESCRIPTION OF MOTION IN ONE DIMENSION

    E-Print Network [OSTI]

    Minnesota, University of

    Lab I - 1 LABORATORY I: DESCRIPTION OF MOTION IN ONE DIMENSION In this laboratory you will measure with your instructor. Remember, one of the reasons for doing physics in a laboratory setting is to help you this laboratory, you should be able to: · Describe completely the motion of any object moving in one dimension

  19. LABORATORY II DESCRIPTION OF MOTION IN TWO DIMENSIONS

    E-Print Network [OSTI]

    Minnesota, University of

    Lab II - 1 LABORATORY II DESCRIPTION OF MOTION IN TWO DIMENSIONS In this laboratory you continue the study of accelerated motion in more situations. The carts you used in Laboratory I moved in only one instructor. OBJECTIVES: After successfully completing this laboratory, you should be able to: · Determine

  20. LABORATORY I: DESCRIPTION OF MOTION IN ONE DIMENSION

    E-Print Network [OSTI]

    Minnesota, University of

    Lab I - 1 LABORATORY I: DESCRIPTION OF MOTION IN ONE DIMENSION In this laboratory you will measure with your instructor. Remember, one of the reasons for doing physics in a laboratory setting is to help you: After you successfully complete this laboratory, you should be able to: · Describe completely the motion

  1. LABORATORY II DESCRIPTION OF MOTION IN TWO DIMENSIONS

    E-Print Network [OSTI]

    Minnesota, University of

    Lab II - 1 LABORATORY II DESCRIPTION OF MOTION IN TWO DIMENSIONS In this laboratory you continue the study of accelerated motion in more situations. The carts you used in Laboratory I moved in only one or your instructor. OBJECTIVES: After successfully completing this laboratory, you should be able to

  2. Flammable gas tank exhauster interlock (FGTEI) computer software design description

    SciTech Connect (OSTI)

    Smith, S.0.

    1996-09-10

    Modicon Compact Programmable Logic Controller (PLC). The device configuration integrates the isolation and current-carrying capacities of mechanical relays with the logic and programming sophistication of the PLC. This document provides descriptions of components and tasks involved in the PLC system for controlling and monitoring the FGTEI. All control functions required by the PLC, and how they are implemented, are described in detail.

  3. Flammable gas tank exhauster interlock (LFGTEI) computer software design description

    SciTech Connect (OSTI)

    Smith, S.O.; Irvitt, R.W., Fluor Daniel Hanford

    1997-02-21

    Modicon Compact Programmable Logic Controller (PLC). The device configuration integrates the isolation and current- carrying capacities of mechanical relays with the logic and programming sophistication of the PLC. This revised document provides descriptions of components and tasks involved in the PLC system for controlling and monitoring the FGTEI. All control functions required by the PLC, and how they are implemented, are described in detail.

  4. Flammable gas tank exhauster interlock (FGTEI) computer software design description

    SciTech Connect (OSTI)

    Smith, S.O., Westinghouse Hanford

    1996-09-20

    Modicon Compact Programmable Logic Controller (PLC). The device configuration integrates the isolation and current- carrying capacities of mechanical relays with the logic and programming sophistication of the PLC. This revised document provides descriptions of components and tasks involved in the PLC system for controlling and monitoring the FGTEI. All control functions required by the PLC, and how they are implemented, are described in detail.

  5. A modular description for collimator EGS simulation tasks

    E-Print Network [OSTI]

    Lanconelli, Nico

    A modular description for collimator EGS simulation tasks geometry in Alessandro Bevilacqua, Dante, Alessandro Riccardi Abstract-EGS is a very common Monte Carlo code, used in the simulation of Nuclear configuration and camera design in Single Photon Emission studies. Using the EGS code, users must define

  6. C. Project Description Transient Signal Processing for Realistic Imagery

    E-Print Network [OSTI]

    Reif, Rafael

    C. Project Description Transient Signal Processing for Realistic Imagery Capturing and reproducing Fourier analysis. As the geometric and visual complexity of 3D scenes continues to grow, a solid signal-processing acquisition. As illustrated in Fig. 1, our goal is to derive a signal-processing framework for all mechanisms

  7. Asymptotic description of pulsed ultrawideband electromagnetic beam field

    E-Print Network [OSTI]

    Oughstun, Kurt

    Asymptotic description of pulsed ultrawideband electromagnetic beam field propagation in dispersive of a pulsed ultrawideband electro- magnetic beam field as it propagates through a dispersive, attenuative evolution of the pulsed-beam field through a single-contour integral that is of the same form

  8. The Internet Transient Network Architecture: A Comparative Description

    E-Print Network [OSTI]

    The Internet Transient Network Architecture: A Comparative Description Henry N Jerez Corporation@cnri.reston.va.us Joud Khoury Electrical & Computer Engineering MSC01 1100 1 University of New Mexico Albuquerque, NM Engineering MSC01 1100 1 University of New Mexico Albuquerque, NM 87131-001 USA Email: (chaouki jlpiovesan

  9. Position Description Project Manager, Office of Community and Economic Development

    E-Print Network [OSTI]

    Collett Jr., Jeffrey L.

    Position Description Project Manager, Office of Community and Economic Development Full will support all aspects of the success of CSU's Office of Community and Economic Development projects from conceptual development and scoping, through tracking and management of projects, including tracking details

  10. Section Enrollment Report (CENSUS) -Table of Contents Subject Description

    E-Print Network [OSTI]

    Pittendrigh, Barry

    Cmity Service EXPL EXPL-Exploratory Studies FNR FNR-Forestry&Natural Resources FR FR-French FS FS-Clinical Pharmacy CMCI CMCI-CIC Common Market CMPL CMPL-Comparative Literature CNIT CNIT-Computer & Info Tech COM (CENSUS) - Table of Contents Subject Description NRES NRES-Natural Res & Environ Sci NS NS-Naval Science

  11. UCLA CalTeach-Math Junior Year Program Description

    E-Print Network [OSTI]

    Ferguson, Thomas S.

    8 UCLA CalTeach-Math Junior Year Program Description: o Pedagogical Content Preparation: The Math 103ABC Seminar Students in the junior year program take Math 103ABC, Observation and Participation: Mathematics Instruction. Each quarter of the Math 103 sequence is a 2 unit seminar course designed to expose

  12. UCLA CalTeach-Math Sophomore Year Program Description

    E-Print Network [OSTI]

    Ferguson, Thomas S.

    7 UCLA CalTeach-Math Sophomore Year Program Description: o Pedagogical Content Preparation: The Math 72SL Seminar Students in the sophomore program take Math 72SL, Classroom Practices in Middle School Mathematics. Math 72SL is a 2 unit seminar course designed to expose students to current issues

  13. UCLA CalTeach-Math Freshman Year Program Description

    E-Print Network [OSTI]

    Ferguson, Thomas S.

    6 UCLA CalTeach-Math Freshman Year Program Description: o Pedagogical Content Preparation: The Math 71SL Seminar Students in the freshman program take Math 71SL, Classroom Practices in Elementary: Observations in an Elementary School Students in Math 71SL observe mathematics teaching in a local elementary

  14. UvA Drone Team Team Description Paper

    E-Print Network [OSTI]

    Visser, Arnoud

    UvA Drone Team Team Description Paper IMAV 2011, Parrot AR.Drone competition Martijn van der Veen;2 The Challenge The ultimate goal is to perform both indoor challenges fully autonomous with the Parrot Drone of a Bachelor thesis. The challenge will be to find a scientific method to train the AR.Drone to accomplish (a

  15. Supplement S1. Description of the WRF performance

    E-Print Network [OSTI]

    Meskhidze, Nicholas

    and simulated wind speed and directions by CAMS stations and WRF model. The blue dots show the CAMS sites.83 and increased to 0.89 when the urban sites were excludedThe agreement for the wind speed in all sitesSupplement S1. Description of the WRF performance The wind fields were computed

  16. MINORS 11/21/2012 College Minor Code Description

    E-Print Network [OSTI]

    Jiang, Wen

    &Envrmtl Sci Agriculture PLBI Plant Biology Agriculture PLTP Plant Pathology Agriculture PTFD Pet Food Processing Agriculture SOIL Soil Science Agriculture SUEV Sustainable Environments Agriculture UFOR Urban/21/2012 College Minor Code Description Technology BCMT Building Const Mgmt Tech Technology OLSV Organizational

  17. Payment Request Description Supplier (Yes/No) Attachments Needed

    E-Print Network [OSTI]

    Griggs, Jerrold R.

    Payment Request Description Supplier (Yes/No) Attachments Needed (All in ONE document) Yes 1- Cash Advance Form Use the Employee/Student Supplier Form Yes 1 - Travel Advance Form Use the Employee/Student Supplier Form Yes 1 - Royalty Agreement/Amount Calculation W-9 or W-8(International) Yes W-9 or W-8

  18. Desired Outcomes Description of Desired Outcomes for MAE Programme

    E-Print Network [OSTI]

    Huang, Jianwei

    #12;Desired Outcomes General Criteria Description of Desired Outcomes for MAE Programme 1 2 3 4 of mechanical and automation engineering An ability to design and conduct experiments, as well as to analyze, especially the importance of health, safety and environmental considerations to both workers and the general

  19. Method of storing radioactive wastes using modified tobermorite

    DOE Patents [OSTI]

    Komarneni, Sridhar (State College, PA); Roy, Della M. (State College, PA)

    1985-01-01

    A new cation exchanger is a modified tobermorite containing aluminum isomorphously substituted for silicon and containing sodium or potassium. The exchanger is selective for lead, rubidium, cobalt and cadmium and is selective for cesium over calcium or sodium. The tobermorites are compatable with cement and are useful for the long-term fixation and storage of radioactive nuclear wastes.

  20. Organically modified silicate coatings for optical fibers A. B. Wojcik

    E-Print Network [OSTI]

    Matthewson, M. John

    Organically modified silicate coatings for optical fibers A. B. Wojcik L. C. Klein V. V. Rondinella been prepared to be used as protective coatings for optical fibers. The synthesis involves the reaction, solvent-free resins were obtained that hardened in seconds when exposed to UV radiation. The coating

  1. Poly(ethylene glycol)-Modified Ligninase Enhances Pentachlorophenol

    E-Print Network [OSTI]

    Wang, Ping

    Poly(ethylene glycol)-Modified Ligninase Enhances Pentachlorophenol Biodegradation in Water-mail: ekn@ornl.gov Received 7 May 1998; accepted 5 December 1998 Abstract: Polychlorinated hydrocarbons are prevalent environmental contaminants whose rates of biodegrada- tion are limited by their minimal

  2. MODIFIED SOLAR INSOLATION AS AN AGRONOMIC FACTOR IN TERRACED ENVIRONMENTS

    E-Print Network [OSTI]

    Evans, Tom

    of altitude, latitude, slope aspect, slope angle, and season. The net solar bene®t or cost from slope levelingMODIFIED SOLAR INSOLATION AS AN AGRONOMIC FACTOR IN TERRACED ENVIRONMENTS T. P. EVANS*1 AND B; Accepted 16 August 1999 ABSTRACT We present a model that calculates incident solar radiation falling

  3. Acid-Induced Gelation of Enzymatically Modified, Preheated Whey Proteins

    E-Print Network [OSTI]

    Khan, Saad A.

    Acid-Induced Gelation of Enzymatically Modified, Preheated Whey Proteins AHMED S. EISSA AND SAAD A, North Carolina 27695-7905 Low-pH whey protein gels are formulated using a sequential protocol of heat-catalyzed -(-glutamyl)- lysine linkages, both at neutral pH, produce a polymerized protein solution. The molecular

  4. IRA Pivot Table Review Using Analyze to Modify Reports

    E-Print Network [OSTI]

    1 IRA Pivot Table Review and Using Analyze to Modify Reports For help, email Financial.Reports in a downloadable table) and summarizes them at a higher level using a defined structure. For help, email Financial.Reports@dartmouth.edu Grand Total Section is a pivot table of the detail in the downloadable table or report table. #12;3 What

  5. On the test of the modified BCS at finite temperature

    E-Print Network [OSTI]

    Nguyen Dinh Dang; Akito Arima

    2006-10-06

    The results and conclusions by Ponomarev and Vdovin [Phys. Rev. C {\\bf 72}, 034309 (2005)] are inadequate to judge the applicability of the modified BCS because they were obtained either in the temperature region, where the use of zero-temperature single-particle spectra is no longer justified, or in too limited configuration spaces.

  6. RESERVOIR SIMULATION USING MIXED METHODS, A MODIFIED METHOD CHARACTERISTICS,

    E-Print Network [OSTI]

    Russell, Thomas F.

    RESERVOIR SIMULATION USING MIXED METHODS, A MODIFIED METHOD CHARACTERISTICS, AND LOCAL GRID Mathematical models for reservoir ow are governed by partial di#11;erential equations whose solution may v is the total Darcy velocity, p the total uid pressure [6], S denotes the saturation of water

  7. A MODIFIED BECKMAN MODEL DU SPEaROPHOTOMETER

    E-Print Network [OSTI]

    The battery charger unit 3 Modification of cell holder 4 Discussion and conclusions 5 FIGURES 1,- -Modified in the Beckman DU Spectrophotometer, respectively.) 4 5. --Wiring diagram (sennidiagrammatic) of battery charger measure- ment of critical voltages; two trickle chargers for the 6-volt "A" batteries, provided with rate

  8. Tracking and Modifying Upper-body Human Motion Data

    E-Print Network [OSTI]

    Zordan, Victor

    of humanlike characters affect the believability, aesthetic, and impact of an animation or virtual environment the dynamics of the animated character. Figure 1 shows a human actor and two animated characters tracking hisTracking and Modifying Upper-body Human Motion Data with Dynamic Simulation Victor B. Zordan

  9. Varying Speed of Light, Modified Chaplygin Gas and Accelerating Universe

    E-Print Network [OSTI]

    Anup Kumar Singha; Ujjal Debnath

    2007-01-01

    In this paper, we have considered a model of modified Chaplygin gas in VSL theory with variable gravitational constant $G$. We have shown that the evolution of the universe starts from radiation era to phantom model. The whole evolution of the universe has been shown diagramatically by using statefinder parameters.

  10. Modified Black Hole with Polar Jet and Vortex

    E-Print Network [OSTI]

    T. Tmmalm

    2001-12-06

    There are many models relating an accretion disk of Black Hole to jet outflow. The herein heuristic model describes the continuation of an external accretion disk to an internal accretion disk for less than Black Hole horizon, and subsequent polar jet outflow along polar axis out of polar vortex wherein the event horizon is no longer descriptive.

  11. Wide size range fast integrated mobility spectrometer

    SciTech Connect (OSTI)

    Wang, Jian

    2013-10-29

    A mobility spectrometer to measure a nanometer particle size distribution is disclosed. The mobility spectrometer includes a conduit and a detector. The conduit is configured to receive and provide fluid communication of a fluid stream having a charged nanometer particle mixture. The conduit includes a separator section configured to generate an electrical field of two dimensions transverse to a dimension associated with the flow of the charged nanometer particle mixture through the separator section to spatially separate charged nanometer particles of the charged nanometer particle mixture in said two dimensions. The detector is disposed downstream of the conduit to detect concentration and position of the spatially-separated nanometer particles.

  12. Size Dependent Population Dynamics of Microtus Ochrogaster

    E-Print Network [OSTI]

    Sauer, John R.; Slade, Norman A.

    1986-06-01

    stream_size 20190 stream_content_type text/plain stream_name slade_american_naturalist.pdf.txt stream_source_info slade_american_naturalist.pdf.txt Content-Encoding UTF-8 Content-Type text/plain; charset=UTF-8 Vol. 127... therefore could make no direct comparison of age- and mass-based methods (such as the analysis in Werner and Caswell 1977 of a population of teasel, Dipsacus sylvestris Huds.). Subsequent to our analysis of voles, we com­ pared age- and mass...

  13. Assessing Learning in Small Sized Physics Courses

    E-Print Network [OSTI]

    Ene, Emanuela

    2015-01-01

    We describe the construction, validation and testing of a concept inventory for an Introduction to Physics of Semiconductors course offered by the department of physics for undergraduate engineering students. By design, this inventory addresses both content knowledge and ability to interpret content via different cognitive processes described in Bloom's taxonomy. The primary challenge comes from the low number of test takers. Since the Rasch Model (aka 1PL IRT model), can be used with small sample sizes, we describe Rasch Modeling analysis and results for this concept inventory.

  14. On the Physics of Size Selectivity

    E-Print Network [OSTI]

    Roland Roth; Dirk Gillespie

    2005-11-07

    We demonstrate that two mechanisms used by biological ion channels to select particles by size are driven by entropy. With uncharged particles in an infinite cylinder, we show that a channel that attracts particles is small-particle selective and that a channel that repels water from the wall is large-particle selective. Comparing against extensive density-functional theory calculations of our model, we find that the main physics can be understood with surprisingly simple bulk models that neglect the confining geometry of the channel completely.

  15. ARM - Measurement - Aerosol particle size distribution

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Comments?govInstrumentsnoaacrnBarrow, Alaska Outreach Home Roomparticle size distribution ARM Data Discovery

  16. 1999 Commercial Buildings Characteristics--Building Size

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)Decade Year-0ProvedDecade Year-0Cubic Monthly Actual Data10)Households,Size of

  17. #MarketSize | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop IncIowa (UtilityMichigan)data bookresult formatswindMarketSize Home n/a n/a n/a

  18. Description of Oculogryphus shuensis sp. n. (Coleoptera, Lampyridae), the first species of the genus in the Sino-Japanese realm, with a modified key to the subfamily Ototretinae

    E-Print Network [OSTI]

    Jeng, Ming-Luen; Engel, Michael S.

    2014-02-06

    in repose; compound eyes large, separated from each other by about half compound eye diameter frontally, ovoid in shape laterally, and with posterior upper margin deeply emarginate in about right angle...Oculogryphus Jeng, Engel & Yang – Antennae... to the subfamily Ototretinae Ming-Luen Jeng1,†, Michael S. Engel2,‡ 1 Department of Biology, National Museum of Natural Science, No. 1, Guanqian Rd., Taichung City 40453, Taiwan, R.O.C. 2 Division of Entomology, Natural History Museum, and Department of Ecology...

  19. Systems and methods of varying charged particle beam spot size

    SciTech Connect (OSTI)

    Chen, Yu-Jiuan

    2014-09-02

    Methods and devices enable shaping of a charged particle beam. A modified dielectric wall accelerator includes a high gradient lens section and a main section. The high gradient lens section can be dynamically adjusted to establish the desired electric fields to minimize undesirable transverse defocusing fields at the entrance to the dielectric wall accelerator. Once a baseline setting with desirable output beam characteristic is established, the output beam can be dynamically modified to vary the output beam characteristics. The output beam can be modified by slightly adjusting the electric fields established across different sections of the modified dielectric wall accelerator. Additional control over the shape of the output beam can be excreted by introducing intentional timing de-synchronization offsets and producing an injected beam that is not fully matched to the entrance of the modified dielectric accelerator.

  20. LNG fleet increases in size and capabilities

    SciTech Connect (OSTI)

    Linser, H.J. Jr.; Drudy, M.J.; Endrizzi, F.; Urbanelli, A.A.

    1997-06-02

    The LNG fleet as of early 1997 consisted of 99 vessels with total cargo capacity of 10.7 million cu m, equivalent to approximately 4.5 million tons. One of the newest additions to the fleet, the 137,000-cu m tanker Al Zubarah, is five times the size of the original commercial vessel Methane Princess. Al Zubarah`s first loading of more than 60,000 tons occurred in December 1996 for deliver to Japanese buyers from the newly commissioned Qatargas LNG plant at Ras Laffan. That size cargo contains enough clean-burning energy to heat 60,000 homes in Japan for 1 month. Measuring nearly 1,000 ft long, the tanker is among the largest in the industry fleet and joined 70 other vessels of more than 100,000 cu m. Most LNG tankers built since 1975 have been larger-capacity vessels. The paper discusses LNG shipping requirements, containment systems, vessel design, propulsion, construction, operations and maintenance, and the future for larger vessels.

  1. Right-Sizing Laboratory Equipment Loads

    SciTech Connect (OSTI)

    Frenze, David; Greenberg, Steve; Mathew, Paul; Sartor, Dale; Starr, William

    2005-11-29

    Laboratory equipment such as autoclaves, glass washers, refrigerators, and computers account for a significant portion of the energy use in laboratories. However, because of the general lack of measured equipment load data for laboratories, designers often use estimates based on 'nameplate' rated data, or design assumptions from prior projects. Consequently, peak equipment loads are frequently overestimated. This results in oversized HVAC systems, increased initial construction costs, and increased energy use due to inefficiencies at low part-load operation. This best-practice guide first presents the problem of over-sizing in typical practice, and then describes how best-practice strategies obtain better estimates of equipment loads and right-size HVAC systems, saving initial construction costs as well as life-cycle energy costs. This guide is one in a series created by the Laboratories for the 21st Century ('Labs21') program, a joint program of the U.S. Environmental Protection Agency and U.S. Department of Energy. Geared towards architects, engineers, and facilities managers, these guides provide information about technologies and practices to use in designing, constructing, and operating safe, sustainable, high-performance laboratories.

  2. Parameterizing Size Distribution in Ice Clouds

    SciTech Connect (OSTI)

    DeSlover, Daniel; Mitchell, David L.

    2009-09-25

    PARAMETERIZING SIZE DISTRIBUTIONS IN ICE CLOUDS David L. Mitchell and Daniel H. DeSlover ABSTRACT An outstanding problem that contributes considerable uncertainty to Global Climate Model (GCM) predictions of future climate is the characterization of ice particle sizes in cirrus clouds. Recent parameterizations of ice cloud effective diameter differ by a factor of three, which, for overcast conditions, often translate to changes in outgoing longwave radiation (OLR) of 55 W m-2 or more. Much of this uncertainty in cirrus particle sizes is related to the problem of ice particle shattering during in situ sampling of the ice particle size distribution (PSD). Ice particles often shatter into many smaller ice fragments upon collision with the rim of the probe inlet tube. These small ice artifacts are counted as real ice crystals, resulting in anomalously high concentrations of small ice crystals (D < 100 µm) and underestimates of the mean and effective size of the PSD. Half of the cirrus cloud optical depth calculated from these in situ measurements can be due to this shattering phenomenon. Another challenge is the determination of ice and liquid water amounts in mixed phase clouds. Mixed phase clouds in the Arctic contain mostly liquid water, and the presence of ice is important for determining their lifecycle. Colder high clouds between -20 and -36 oC may also be mixed phase but in this case their condensate is mostly ice with low levels of liquid water. Rather than affecting their lifecycle, the presence of liquid dramatically affects the cloud optical properties, which affects cloud-climate feedback processes in GCMs. This project has made advancements in solving both of these problems. Regarding the first problem, PSD in ice clouds are uncertain due to the inability to reliably measure the concentrations of the smallest crystals (D < 100 µm), known as the “small mode”. Rather than using in situ probe measurements aboard aircraft, we employed a treatment of ice cloud optical properties formulated in terms of PSD parameters in combination with remote measurements of thermal radiances to characterize the small mode. This is possible since the absorption efficiency (Qabs) of small mode crystals is larger at 12 µm wavelength relative to 11 µm wavelength due to the process of wave resonance or photon tunneling more active at 12 µm. This makes the 12/11 µm absorption optical depth ratio (or equivalently the 12/11 µm Qabs ratio) a means for detecting the relative concentration of small ice particles in cirrus. Using this principle, this project tested and developed PSD schemes that can help characterize cirrus clouds at each of the three ARM sites: SGP, NSA and TWP. This was the main effort of this project. These PSD schemes and ice sedimentation velocities predicted from them have been used to test the new cirrus microphysics parameterization in the GCM known as the Community Climate Systems Model (CCSM) as part of an ongoing collaboration with NCAR. Regarding the second problem, we developed and did preliminary testing on a passive thermal method for retrieving the total water path (TWP) of Arctic mixed phase clouds where TWPs are often in the range of 20 to 130 g m-2 (difficult for microwave radiometers to accurately measure). We also developed a new radar method for retrieving the cloud ice water content (IWC), which can be vertically integrated to yield the ice water path (IWP). These techniques were combined to determine the IWP and liquid water path (LWP) in Arctic clouds, and hence the fraction of ice and liquid water. We have tested this approach using a case study from the ARM field campaign called M-PACE (Mixed-Phase Arctic Cloud Experiment). This research led to a new satellite remote sensing method that appears promising for detecting low levels of liquid water in high clouds typically between -20 and -36 oC. We hope to develop this method in future research.

  3. The influence of size, shape, and surface coating on the stability of aqueous nanoparticle suspensions

    SciTech Connect (OSTI)

    Mulvihill, M.J.; Habas, S.E.; La Plante, I.J.; Wan, J.; Mokari, T.

    2010-09-03

    In response to the rapid development and emerging commercialization of nanoparticles, fundamental studies concerning the fate of nanoparticles in the environment are needed. Precise control over the nanoparticle size, shape, and surface coating of cadmium selenide particles modified with thiolate ligands has been used to analyze the effects of nanoparticle design on their stability in aqueous environments. Nanoparticle stability was quantified using the concept of critical coagulation concentration (CCC) in solutions of sodium chloride. These investigations characterized the instability of the ligand coatings, which varied directly with chain length of the capping ligands. The stability of the ligand coatings were characterized as a function of time, pH, and ionic strength. Ligand dissociation has been shown to be a primary mechanism for nanoparticle aggregation when short-chain (C2-C6) ligands are used in the ligand shell. Stable nanoparticle suspensions prepared with long chain ligands (C11) were used to characterize nanoparticle stability as a function of size and shape. A linear relationship between particle surface area and the CCC was discovered and was found to be independent of nanoparticle shape. Quantitative analysis of nanoparticle size, shape, and surface coating demonstrated the importance of ligand stability and particle surface area for the prediction of nanoparticle stability.

  4. Flattened velocity dispersion profiles in Globular Clusters: Newtonian tides or modified gravity?

    E-Print Network [OSTI]

    X. Hernandez; M. A. Jimenez; C. Allen

    2012-10-22

    Over the past couple of years, a number of observational studies have confirmed the flattening of the radial velocity dispersion profiles for stars in various nearby globular clusters. As the projected radial coordinate is increased, a radius appears beyond which, the measured velocity dispersion ceases to drop and settles at a fixed value, $\\sigma_{\\infty}$. Under Newtonian gravity, this is explained by invoking tidal heating from the overall Milky Way potential on the outer, more loosely bound stars, of the globular clusters in question. From the point of view of modified gravity theories, such an outer flattening is expected on crossing the critical acceleration threshold $a_{0}$, beyond which, a transition to MONDian dynamics is expected, were equilibrium velocities cease to be a function of distance. In this paper we attempt to sort out between the above competing explanations, by looking at their plausibility in terms of an strictly empirical approach. We determine Newtonian tidal radii using masses accurately calculated through stellar population modelling, and hence independent of any dynamical assumptions, distances, size and orbital determinations for a sample of 16 globular clusters. We show that their Newtonian tidal radii at perigalacticon are generally larger that the radii at which the flattening in the velocity dispersion profiles occurs, by large factors of 4, on average. While this point makes the Newtonian tidal explanation suspect, it is found that the radii at which the flattening is observed on average correlate with the radii where the $a_{0}$ threshold is crossed, and that $\\sigma_{\\infty}$ values scale with the fourth root of the total masses, all features predicted under modified gravity theories.

  5. Characterization and thermal stability of cobalt-modified 1-D nanostructured trititanates

    SciTech Connect (OSTI)

    Morgado, Edisson; Abreu, Marco A.S. de

    2009-01-15

    One-dimensional (1-D) nanostructured sodium trititanates were obtained via alkali hydrothermal method and modified with cobalt via ion exchange at different Co concentrations. The resulting cobalt-modified trititanate nanostructures (Co-TTNS) were characterized by TGA, XRD, TEM/SAED, DRS-UV-Vis and N{sub 2} adsorption techniques. Their general chemical formula was estimated as Na{sub x}Co{sub y/2}H{sub 2-x-y}Ti{sub 3}O{sub 7}.nH{sub 2}O and they maintained the same nanostructured and multilayered nature of the sodium precursor, with the growth direction of nanowires and nanotubes along [010]. As a consequence of the Co{sup 2+} incorporation replacing sodium between trititanate layers, two new diffraction lines became prominent and the interlayer distance was reduced with respect to that of the precursor sodium trititanate. Surface area was slightly increased with cobalt intake whereas pore size distribution was hardly affected. Besides, Co{sup 2+} incorporation in trititanate crystal structure also resulted in enhanced visible light photon absorption as indicated by a strong band-gap narrowing. Morphological and structural thermal transformations of Co-TTNS started nearly 400 deg. C in air and the final products after calcination at 800 deg. C were found to be composed of TiO{sub 2}-rutile, CoTiO{sub 3} and a bronze-like phase with general formula Na{sub 2x}Ti{sub 1-x}Co{sub x}O{sub 2}. - Graphical abstract: Co{sup 2+} incorporation in 1D-trititanate crystal nanostructure (Co-TTNS) causes reduction in interlayer distance by comparison with its sodium precursor (Na-TTNS) and leads to enhanced visible light photon absorption efficiency due to a strong band-gap narrowing.

  6. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    USDOE Office of Science SC United States English Journal Article Journal Name Journal of Hazardous Materials Journal Volume Medium ED Size p OSTI ID Legacy ID OSTI ID BNL JA DE...

  7. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    Energy FE United States English Journal Article Journal Name International Journal of Clean Coal and Energy Journal Volume Journal Issue Medium ED Size OSTI ID Legacy ID OSTI ID...

  8. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    SC USDOE Office of Science SC United States English Journal Article Journal Name BMC Genomics Journal Volume Journal Issue Medium X Size OSTI ID Legacy ID OSTI ID None DE AC05...

  9. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    Venturing off the lightcone local versus global features ILight Cone May Skiathos Greece Medium ED Size pages OSTI ID Legacy ID OSTI ID SLAC PUB AC02 SF00515 Other arXiv http...

  10. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    and Environmental Research BER SC United States English Journal Article Journal Name Optics Express Journal Volume Journal Issue Medium ED Size p A299 A308 OSTI ID Legacy ID OSTI...

  11. Towards a consistent description of in-medium parton branching

    E-Print Network [OSTI]

    Apolinário, Liliana; Milhano, Guilherme; Salgado, Carlos A

    2015-01-01

    Ultra-relativistic heavy-ion collisions are a window of opportunity to study QCD matter under extreme conditions of temperature and density, such as the quark-gluon plasma. Among the several possibilities, the study of jet quenching - generic name given to in-medium energy loss modifications of the parton branching - is a powerful tool to assess the properties of this new state of matter. The description of the parton shower is very well understood in vacuum (controlled reference) and medium-induced modifications of this process can be experimentally accessed through jet measurements. Current experimental data, however, cannot be entirely described only with energy loss phenomena. Transverse momentum broadening and decoherence effects, both theoretically established by now, and their interplay are essential to build a consistent picture of the medium-modifications of the parton branching and to achieve a correct description of the current experimental data. In this write-up, we will present the latest develop...

  12. Domain-specific Web Service Discovery with Service Class Descriptions

    SciTech Connect (OSTI)

    Rocco, D; Caverlee, J; Liu, L; Critchlow, T J

    2005-02-14

    This paper presents DynaBot, a domain-specific web service discovery system. The core idea of the DynaBot service discovery system is to use domain-specific service class descriptions powered by an intelligent Deep Web crawler. In contrast to current registry-based service discovery systems--like the several available UDDI registries--DynaBot promotes focused crawling of the Deep Web of services and discovers candidate services that are relevant to the domain of interest. It uses intelligent filtering algorithms to match services found by focused crawling with the domain-specific service class descriptions. We demonstrate the capability of DynaBot through the BLAST service discovery scenario and describe our initial experience with DynaBot.

  13. Active transport: A kinetic description based on thermodynamic grounds

    E-Print Network [OSTI]

    S. Kjelstrup; J. M. Rubi; D. Bedeaux

    2004-12-17

    We show that active transport processes in biological systems can be understood through a local equilibrium description formulated at the mesoscale, the scale to describe stochastic processes. This new approach uses the method established by nonequilibrium thermodynamics to account for the irreversible processes occurring at this scale and provides nonlinear kinetic equations for the rates in terms of the driving forces. The results show that the application domain of nonequilibrium thermodynamics method to biological systems goes beyond the linear domain. A model for transport of Ca$^{2+}$ by the Ca$^{2+}$-ATPase, coupled to the hydrolysis of adenosine-triphosphate is analyzed in detail showing that it depends on the reaction Gibbs energy in a non-linear way. Our results unify thermodynamic and kinetic descriptions, thereby opening new perspectives in the study of different transport phenomena in biological systems.

  14. Superbounce and Loop Quantum Cosmology Ekpyrosis from Modified Gravity

    E-Print Network [OSTI]

    V. K. Oikonomou

    2015-04-07

    As is known, in modified cosmological theories of gravity many of the cosmologies which could not be generated by standard Einstein gravity, can be consistently described by $F(R)$ theories. Using known reconstruction techniques, we investigate which $F(R)$ theories can lead to a Hubble parameter describing two types of cosmological bounces, the superbounce model, related to supergravity and non-supersymmetric models of contracting ekpyrosis and also the Loop Quantum Cosmology modified ekpyrotic model. Since our method is an approximate method, we investigate the problem at large and small curvatures. As we evince, both models yield power law reconstructed $F(R)$ gravities, with the most interesting new feature being that both lead to accelerating cosmologies, in the large curvature approximation. The mathematical properties of the some Friedmann-Robertson-Walker spacetimes $M$, that describe superbounce-like cosmologies are also pointed out, with regards to the group of curvature collineations $CC(M)$.

  15. Regular and Chaotic Behaviors of Modified Rayleigh Duffing oscillator

    E-Print Network [OSTI]

    C. H. Miwadinou; A. V. Monwanou; C. Ainamon; J. B. Chabi Orou

    2014-03-26

    The regular and chaotic behavior of modified Rayleigh-Duffing oscillator is studied. We consider in this paper the dynamics of Modified Rayleigh Duffing oscillator. The harmonic balance method are used to find the amplitudes of the oscillatory states, and analyze. The influence of system parameters are clearly found on the bifurcations in the response of this system is investigated. It is found also hysteresis and jump phenomenon are appered or desappered when certain parameters incrases or descrases. Various bifurcation structures, the variation of the Lyapunov exponent are obtained, using numerical simulations of the equations of motion. Various basin attraction are used to confirm the predictions of bifurcation structures and its corresponds Lyapunov exponent.

  16. A Modified Equation for Neural Conductance and Resonance

    E-Print Network [OSTI]

    M. Robert Showalter

    1999-05-06

    A modified equation, the S-K equation, fits data that the current neural conduction equation, the K-R equation, does not. The S-K equation is a modified Heaviside equation, based on a new interpretation of cross terms. Elements of neural anatomy and function are reviewed to put the S-K equation into context. The fit between S-K and resonance-like neural data is then shown. Appendix 1: Derivation of crossterms that represent combinations of physical laws for a line conductor of finite length. Appendix 2: Evaluation of crossterms that represent combinations of physical laws according to consistency arguments. Appendix 3: Some background on resonance. Appendix 4: Web access to some brain modeling, correspondence with NATURE, and discussion of the work in George Johnson's New York Times forums.

  17. Nonlocal description of a falling body through the air

    E-Print Network [OSTI]

    Kwok Sau Fa

    2008-10-02

    In this present work we consider a falling body through the air under the influence of gravity. In particular, we consider the experimental data based upon the free fall of six men in the atmosphere of the earth. In order to describe this process we employ a nonlocal dissipative force. We show that our description, by using an exponential memory kernel, can fit the experimental data as well as that of a local dissipative force.

  18. Source Temperatures and Sizes in Central Collisions

    E-Print Network [OSTI]

    C. Schwarz; ALADIN collaboration

    1997-04-03

    For midrapidity fragments from central 50-200 AMeV Au+Au collisions temperatures from double ratios of isotopic yields were compared with temperatures from particle unbound states. Temperatures from particle unbound states with T = 4-5 MeV show with increasing beam energy an increasing difference to temperatures from double ratios of isotopic yields, which increase from T = 5MeV to T = 12MeV. The lower temperatures extracted from particle unstable states can be explained by increasing cooling of the decaying system due to expansion. This expansion is driven by the radial flow, and freeze out of particle unstable states might depend on the dynamics of the expanding system. Source sizes from pp-correlation functions were found to be 9 to 11 fm.

  19. Crystallization of polyethylene by modified weighted density approximation(MWDA)

    E-Print Network [OSTI]

    Razeghizadeh, Alireza; Lavafpour, Farhad

    2015-01-01

    In this article, we use the modified weighted density approximation to study the crystallization of polyethylene. We also use a direct correlation function of polyethylene based on RISM theory. The free energy of a polyethylene is calculated using density functional theory. The crystallization and solid and liquid density are calculated and finally compared with the prism simulation and experimental results. That shown the result obtained by MWDA is in better agreement, compared with the experimental result than the prism.

  20. Crystallization of polyethylene by modified weighted density approximation(MWDA)

    E-Print Network [OSTI]

    Alireza Razeghizadeh; Vahdat Rafee; Farhad Lavafpour

    2015-02-07

    In this article, we use the modified weighted density approximation to study the crystallization of polyethylene. We also use a direct correlation function of polyethylene based on RISM theory. The free energy of a polyethylene is calculated using density functional theory. The crystallization and solid and liquid density are calculated and finally compared with the prism simulation and experimental results. That shown the result obtained by MWDA is in better agreement, compared with the experimental result than the prism.

  1. A modified method for barium titanate nanoparticles synthesis

    SciTech Connect (OSTI)

    Ashiri, R., E-mail: ro_ashiri@iaud.ac.ir [Department of Materials Science and Engineering, Dezful Branch, Islamic Azad University, P.O. Box 313, Dezful (Iran, Islamic Republic of); Nemati, Ali [Department of Materials Science and Engineering, Sharif University of Technology, P.O. Box 11365-9466, Tehran (Iran, Islamic Republic of)] [Department of Materials Science and Engineering, Sharif University of Technology, P.O. Box 11365-9466, Tehran (Iran, Islamic Republic of); Sasani Ghamsari, M. [Solid State Lasers Research Group, Laser and Optics Research School, NSTRI, P.O. Box 11365-8486, Tehran (Iran, Islamic Republic of)] [Solid State Lasers Research Group, Laser and Optics Research School, NSTRI, P.O. Box 11365-8486, Tehran (Iran, Islamic Republic of); Sanjabi, S. [Nanomaterials Group, Department of Materials Engineering, Tarbiat Modares University, P.O. Box 14115-143, Tehran (Iran, Islamic Republic of)] [Nanomaterials Group, Department of Materials Engineering, Tarbiat Modares University, P.O. Box 14115-143, Tehran (Iran, Islamic Republic of); Aalipour, M. [Department of Materials Science and Engineering, Sharif University of Technology, P.O. Box 11365-9466, Tehran (Iran, Islamic Republic of)] [Department of Materials Science and Engineering, Sharif University of Technology, P.O. Box 11365-9466, Tehran (Iran, Islamic Republic of)

    2011-12-15

    Graphical abstract: TEM micrograph of BaTiO{sub 3} powders synthesized at 800 Degree-Sign C for 1 h and SAED pattern (inset) of BaTiO{sub 3} powders. In this research, a modified, cost efficient and quick sol-gel procedure was used for preparation of BaTiO{sub 3} nanoparticles. Highlights: Black-Right-Pointing-Pointer A modified process was used for preparation. Black-Right-Pointing-Pointer The modified process led to preparation of finer BaTiO{sub 3} nanoparticles in shorter period of time and lower temperature contrary to previous researches. Black-Right-Pointing-Pointer The proposed procedure seems to be more preferable for mass production. -- Abstract: In this research, a modified, cost effective sol-gel procedure applied to synthesize BaTiO{sub 3} nanoparticles. XRD and electron microscopy (SEM and TEM) applied for microstructural characterization of powders. The obtained results showed that the type of precursors, their ratio and the hydrolysis conditions had a great effect on time, temperature and therefore the costs of the synthesis process. By selection, utilization of optimized precursor's type, hydrolysis conditions, fine cubic BaTiO{sub 3} nanoparticles were synthesized at low temperature and in short time span (1 h calcination at 800 Degree-Sign C). The proposed procedure seems to be more preferable for mass production. The result indicated that the polymorphic transformation to tetragonal (ferroelectric characteristic) occurred at 900 Degree-Sign C, which might be an indication of being nanosized.

  2. Structure formation in a nonlocally modified gravity model

    SciTech Connect (OSTI)

    Park, Sohyun; Dodelson, Scott

    2013-01-01

    We study a nonlocally modified gravity model proposed by Deser and Woodard which gives an explanation for current cosmic acceleration. By deriving and solving the equations governing the evolution of the structure in the Universe, we show that this model predicts a pattern of growth that differs from standard general relativity (+dark energy) at the 10-30% level. These differences will be easily probed by the next generation of galaxy surveys, so the model should be tested shortly.

  3. Pore size distribution and accessible pore size distribution in bituminous coals

    SciTech Connect (OSTI)

    Sakurovs, Richard [ORNL; He, Lilin [ORNL; Melnichenko, Yuri B [ORNL; Radlinski, Andrzej Pawell [ORNL; Blach, Tomasz P [ORNL

    2012-01-01

    The porosity and pore size distribution of coals determine many of their properties, from gas release to their behavior on carbonization, and yet most methods of determining pore size distribution can only examine a restricted size range. Even then, only accessible pores can be investigated with these methods. Small-angle neutron scattering (SANS) and ultra small-angle neutron scattering (USANS) are increasingly used to characterize the size distribution of all of the pores non-destructively. Here we have used USANS/SANS to examine 24 well-characterized bituminous and subbituminous coals: three from the eastern US, two from Poland, one from New Zealand and the rest from the Sydney and Bowen Basins in Eastern Australia, and determined the relationships of the scattering intensity corresponding to different pore sizes with other coal properties. The range of pore radii examinable with these techniques is 2.5 nm to 7 {micro}m. We confirm that there is a wide range of pore sizes in coal. The pore size distribution was found to be strongly affected by both rank and type (expressed as either hydrogen or vitrinite content) in the size range 250 nm to 7 {micro}m and 5 to 10 nm, but weakly in intermediate regions. The results suggest that different mechanisms control coal porosity on different scales. Contrast-matching USANS and SANS were also used to determine the size distribution of the fraction of the pores in these coals that are inaccessible to deuterated methane, CD{sub 4}, at ambient temperature. In some coals most of the small ({approx} 10 nm) pores were found to be inaccessible to CD{sub 4} on the time scale of the measurement ({approx} 30 min - 16 h). This inaccessibility suggests that in these coals a considerable fraction of inherent methane may be trapped for extended periods of time, thus reducing the effectiveness of methane release from (or sorption by) these coals. Although the number of small pores was less in higher rank coals, the fraction of total pores that was inaccessible was not rank dependent. In the Australian coals, at the 10 nm to 50 nm size scales the pores in inertinites appeared to be completely accessible to CD{sub 4}, whereas the pores in the vitrinite were about 75% inaccessible. Unlike the results for total porosity that showed no regional effects on relationships between porosity and coal properties, clear regional differences in the relationships between fraction of closed porosity and coal properties were found. The 10 to 50 nm-sized pores of inertinites of the US and Polish coals examined appeared less accessible to methane than those of the inertinites of Australian coals. This difference in pore accessibility in inertinites may explain why empirical relationships between fluidity and coking properties developed using Carboniferous coals do not apply to Australian coals.

  4. Reducing uncertainty in geostatistical description with well testing pressure data

    SciTech Connect (OSTI)

    Reynolds, A.C.; He, Nanqun; Oliver, D.S.

    1997-08-01

    Geostatistics has proven to be an effective tool for generating realizations of reservoir properties conditioned to static data, e.g., core and log data and geologic knowledge. Due to the lack of closely spaced data in the lateral directions, there will be significant variability in reservoir descriptions generated by geostatistical simulation, i.e., significant uncertainty in the reservoir descriptions. In past work, we have presented procedures based on inverse problem theory for generating reservoir descriptions (rock property fields) conditioned to pressure data and geostatistical information represented as prior means for log-permeability and porosity and variograms. Although we have shown that the incorporation of pressure data reduces the uncertainty below the level contained in the geostatistical model based only on static information (the prior model), our previous results assumed did not explicitly account for uncertainties in the prior means and the parameters defining the variogram model. In this work, we investigate how pressure data can help detect errors in the prior means. If errors in the prior means are large and are not taken into account, realizations conditioned to pressure data represent incorrect samples of the a posteriori probability density function for the rock property fields, whereas, if the uncertainty in the prior mean is incorporated properly into the model, one obtains realistic realizations of the rock property fields.

  5. Towards a consistent description of in-medium parton branching

    E-Print Network [OSTI]

    Liliana Apolinário; Néstor Armesto; Guilherme Milhano; Carlos A. Salgado

    2015-05-25

    Ultra-relativistic heavy-ion collisions are a window of opportunity to study QCD matter under extreme conditions of temperature and density, such as the quark-gluon plasma. Among the several possibilities, the study of jet quenching - generic name given to in-medium energy loss modifications of the parton branching - is a powerful tool to assess the properties of this new state of matter. The description of the parton shower is very well understood in vacuum (controlled reference) and medium-induced modifications of this process can be experimentally accessed through jet measurements. Current experimental data, however, cannot be entirely described only with energy loss phenomena. Transverse momentum broadening and decoherence effects, both theoretically established by now, and their interplay are essential to build a consistent picture of the medium-modifications of the parton branching and to achieve a correct description of the current experimental data. In this write-up, we will present the latest developments that address such unified description.

  6. The role of vector fields in modified gravity scenarios

    SciTech Connect (OSTI)

    Tasinato, Gianmassimo; Koyama, Kazuya; Khosravi, Nima E-mail: kazuya.koyama@port.ac.uk

    2013-11-01

    Gravitational vector degrees of freedom typically arise in many examples of modified gravity models. We start to systematically explore their role in these scenarios, studying the effects of coupling gravitational vector and scalar degrees of freedom. We focus on set-ups that enjoy a Galilean symmetry in the scalar sector and an Abelian gauge symmetry in the vector sector. These symmetries, together with the requirement that the equations of motion contain at most two space-time derivatives, only allow for a small number of operators in the Lagrangian for the gravitational fields. We investigate the role of gravitational vector fields for two broad classes of phenomena that characterize modified gravity scenarios. The first is self-acceleration: we analyze in general terms the behavior of vector fluctuations around self-accelerating solutions, and show that vanishing kinetic terms of vector fluctuations lead to instabilities on cosmological backgrounds. The second phenomenon is the screening of long range fifth forces by means of Vainshtein mechanism. We show that if gravitational vector fields are appropriately coupled to a spherically symmetric source, they can play an important role for defining the features of the background solution and the scale of the Vainshtein radius. Our general results can be applied to any concrete model of modified gravity, whose low-energy vector and scalar degrees of freedom satisfy the symmetry requirements that we impose.

  7. Probing hybrid modified gravity by stellar motion around Galactic Centre

    E-Print Network [OSTI]

    D. Borka; S. Capozziello; P. Jovanovi?; V. Borka Jovanovi?

    2015-04-29

    We consider possible signatures for the so called {\\it hybrid gravity} within the Galactic Central Parsec. This modified theory of gravity consists of a superposition of the metric Einstein-Hilbert Lagrangian with an $f(R)$ term constructed {\\it \\`{a} la Palatini } and can be easily reduced to an equivalent scalar-tensor theory. The present analysis is based on the S2 star orbital precession around the massive compact dark object at the Galactic Centre where the simulated orbits in hybrid modified gravity are compared with astronomical observations. These simulations result with strong constraints on the range of hybrid gravity interaction parameter $\\phi_0$ and show that its most probable value, in the case of S2 star, is around -0.0009 to -0.0002. At the same time, we are also able to obtain reliable constrains on the effective mass parameter $m_{\\phi}$ of hybrid modified gravity. Its most probable value, in the case of S2 star, is around -0.0034 to -0.0025. Furthermore, the hybrid gravity potential induces precession of S2 star orbit in the same direction as General Relativity. In previous papers, we considered other types of extended gravities, like metric power law $f(R)\\propto R^n$ gravity, inducing Yukawa and Sanders-like gravitational potentials, but it seems that hybrid gravity is the best among these models to explain different gravitational phenomena at different astronomical scales.

  8. Modified Dust and the Small Scale Crisis in CDM

    E-Print Network [OSTI]

    Fabio Capela; Sabir Ramazanov

    2015-04-29

    At large scales and for sufficiently early times, dark matter is described as a pressureless perfect fluid---dust---non-interacting with Standard Model fields. These features are captured by a simple model with two scalars: a Lagrange multiplier and another playing the role of the velocity potential. That model arises naturally in some gravitational frameworks, e.g., the mimetic dark matter scenario. We consider an extension of the model by means of higher derivative terms, such that the dust solutions are preserved at the background level, but there is a non-zero sound speed at the linear level. We associate this {\\it Modified Dust} with dark matter, and study the linear evolution of cosmological perturbations in that picture. The most prominent effect is the suppression of their power spectrum for sufficiently large cosmological momenta. This can be relevant in view of the problems that cold dark matter faces at sub-galactic scales, e.g., the missing satellites problem. At even shorter scales, however, perturbations of Modified Dust are enhanced compared to the predictions of more common particle dark matter scenarios. This is a peculiarity of their evolution in radiation dominated background. We also briefly discuss clustering of Modified Dust. We write the system of equations in the Newtonian limit, and sketch the possible mechanism which could prevent the appearance of caustic singularities. The same mechanism may be relevant in light of the core-cusp problem.

  9. Resurrecting the Size Effect: Firm Size, Profitability Shocks, and Expected Stock Returns

    E-Print Network [OSTI]

    Aazhang, Behnaam

    and Mathijs A. van Dijk* September 2008 Abstract Recent studies report that the size effect in U.S. stock of Business, Ohio State University. Mathijs A. van Dijk is at the Rotterdam School of Management, Erasmus Dijk (2006) for a survey of the literature to date. 2 Dichev (1998), Chan, Karceski, and Lakonishok

  10. size; island size promoted abundances of some organisms and reduced others (Fig. 1). Second,

    E-Print Network [OSTI]

    Springer, Timothy A.

    - systems. Although a growing number of studies have used the concepts developed in island geographysize; island size promoted abundances of some organisms and reduced others (Fig. 1). Second, our study found diversity, community compo- sition, and ecosystem functioning all responded to island

  11. Cost Sharing for the Economic Lot-Sizing Problem with ...

    E-Print Network [OSTI]

    2011-04-18

    Keywords: game theory; cooperative game; cost sharing; integrality gap; economic lot-sizing ... order to meet demand, the retailer can either place an order for newly ...... Capacitated dynamic lot sizing problems in closed-loop supply chain.

  12. Size homeostasis in adherent cells studied by synthetic phase microscopy

    E-Print Network [OSTI]

    Sung, Yongjin

    The coupling of the rate of cell growth to the rate of cell division determines cell size, a defining characteristic that is central to cell function and, ultimately, to tissue architecture. The physiology of size homeostasis ...

  13. SBA Increases Size Standards for Waste Remediation Services ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    You may also mail comments to Khem R. Sharma, Chief, Office of Size Standards, 409 3rd St., SW, Mail Code 6530, Washington, DC 20416. As part of an ongoing review of all size...

  14. Calibrating page sized Gafchromic EBT3 films

    SciTech Connect (OSTI)

    Crijns, W.; Maes, F.; Heide, U. A. van der; Van den Heuvel, F. [Department of Radiation Oncology, University Hospitals Leuven, Herestraat 49, 3000 Leuven (Belgium); Department ESAT/PSI-Medical Image Computing, Medical Imaging Research Center, KU Leuven, Herestraat 49, 3000 Leuven (Belgium); Department of Radiation Oncology, The Netherlands Cancer Institute-Antoni van Leeuwenhoek Hospital, Plesmanlaan 121, 1066 CX Amsterdam (Netherlands); Department of Radiation Oncology, University Hospitals Leuven, Herestraat 49, 3000 Leuven (Belgium)

    2013-01-15

    Purpose: The purpose is the development of a novel calibration method for dosimetry with Gafchromic EBT3 films. The method should be applicable for pretreatment verification of volumetric modulated arc, and intensity modulated radiotherapy. Because the exposed area on film can be large for such treatments, lateral scan errors must be taken into account. The correction for the lateral scan effect is obtained from the calibration data itself. Methods: In this work, the film measurements were modeled using their relative scan values (Transmittance, T). Inside the transmittance domain a linear combination and a parabolic lateral scan correction described the observed transmittance values. The linear combination model, combined a monomer transmittance state (T{sub 0}) and a polymer transmittance state (T{sub {infinity}}) of the film. The dose domain was associated with the observed effects in the transmittance domain through a rational calibration function. On the calibration film only simple static fields were applied and page sized films were used for calibration and measurements (treatment verification). Four different calibration setups were considered and compared with respect to dose estimation accuracy. The first (I) used a calibration table from 32 regions of interest (ROIs) spread on 4 calibration films, the second (II) used 16 ROIs spread on 2 calibration films, the third (III), and fourth (IV) used 8 ROIs spread on a single calibration film. The calibration tables of the setups I, II, and IV contained eight dose levels delivered to different positions on the films, while for setup III only four dose levels were applied. Validation was performed by irradiating film strips with known doses at two different time points over the course of a week. Accuracy of the dose response and the lateral effect correction was estimated using the dose difference and the root mean squared error (RMSE), respectively. Results: A calibration based on two films was the optimal balance between cost effectiveness and dosimetric accuracy. The validation resulted in dose errors of 1%-2% for the two different time points, with a maximal absolute dose error around 0.05 Gy. The lateral correction reduced the RMSE values on the sides of the film to the RMSE values at the center of the film. Conclusions: EBT3 Gafchromic films were calibrated for large field dosimetry with a limited number of page sized films and simple static calibration fields. The transmittance was modeled as a linear combination of two transmittance states, and associated with dose using a rational calibration function. Additionally, the lateral scan effect was resolved in the calibration function itself. This allows the use of page sized films. Only two calibration films were required to estimate both the dose and the lateral response. The calibration films were used over the course of a week, with residual dose errors Less-Than-Or-Slanted-Equal-To 2% or Less-Than-Or-Slanted-Equal-To 0.05 Gy.

  15. Impact of Secondary Users' Field Size on Spectrum Sharing Opportunities

    E-Print Network [OSTI]

    Yanikomeroglu, Halim

    Aramco, Dhahran, Saudi Arabia. spatial size of the field of secondary users. In most studies, the spatial

  16. Perceptual Affordances of Wall-Sized Displays for

    E-Print Network [OSTI]

    Isenberg, Petra

    .g., HCI)]: Miscellaneous. Introduction Wall-sized displays (PowerWalls) engulf viewers in very large high

  17. Cogeneration System Size Optimization Constant Capacity and Constant Demand Models 

    E-Print Network [OSTI]

    Wong-Kcomt, J. B.; Turner, W. C.

    1993-01-01

    is made up by auxiliary boilers. 2. Isolated Operation, Thermal Load Following: the system is sized to match or exceed the maximum thermal load. Any electrical load deficit is made up by auxiliary generator. 3. Electrically Baseloaded, the system... is sized to meet - or slightly exceed the minimum electrical demand. 4. Thermally Baseloaded, the system is sized to meet - or slightly exceed the minimum thermal demand. 5. Maximum Legal System Size, as determined by the Public Utilities...

  18. Structure of polyamidoamide dendrimers up to limiting generations: A mesoscale description

    E-Print Network [OSTI]

    Goddard III, William A.

    Structure of polyamidoamide dendrimers up to limiting generations: A mesoscale description Prabal K, while reducing the degrees of freedom by tenfold. This mesoscale description has allowed us to study

  19. Modified Anti-de-Sitter Metric, Light-Front Quantized QCD, and...

    Office of Scientific and Technical Information (OSTI)

    Modified Anti-de-Sitter Metric, Light-Front Quantized QCD, and Conformal Quantum Mechanics Citation Details In-Document Search Title: Modified Anti-de-Sitter Metric, Light-Front...

  20. Sexual size dimorphism and phylogeny in North American minnows

    E-Print Network [OSTI]

    Pyron, Mark

    often sexually size dimorphic than birds with nonlekking mating systems (Oakes, 1992). In snakes (ShineSexual size dimorphism and phylogeny in North American minnows MARK PYRON University of Oklahoma 1995 Sexual size dimorphism (SSD) is predicted to vary across mating systems. A previous study examined

  1. ORIGINAL ARTICLE Metagenomic analysis of size-fractionated

    E-Print Network [OSTI]

    Stewart, Frank

    and metabolism of OMZ microorganisms vary between particle-associated and free-living size fractions. We used.6 lm) and small (0.2­1.6 lm) filter size fractions along a depth gradient in the OMZ off Chile. Despite steep vertical redox gradients, size fraction was a significantly stronger predictor of community

  2. Semi-continuous Sized Types and Termination Andreas Abel?

    E-Print Network [OSTI]

    Abel, Andreas

    Semi-continuous Sized Types and Termination Andreas Abel-based approach to termination uses sized types: an ordinal bound for the size of a data structure is stored criterion, * *a calculus for semi-continuous function is developed. 1 Introduction Termination

  3. Semi-continuous Sized Types and Termination Andreas Abel

    E-Print Network [OSTI]

    Abel, Andreas

    , and classical applications are total correctness and termination of partial evaluation. In languagesSemi-continuous Sized Types and Termination Andreas Abel Institut für Informatik Ludwig to termination uses sized types: an ordinal bound for the size of a data structure is stored in its type

  4. Concentration of measures via size biased couplings

    E-Print Network [OSTI]

    Ghosh, Subhankar

    2009-01-01

    Let $Y$ be a nonnegative random variable with mean $\\mu$ and finite positive variance $\\sigma^2$, and let $Y^s$, defined on the same space as $Y$, have the $Y$ size biased distribution, that is, the distribution characterized by E[Yf(Y)]=\\mu E f(Y^s) for all functions $f$ for which these expectations exist. Under a variety of conditions on the coupling of Y and $Y^s$, including combinations of boundedness and monotonicity, concentration of measure inequalities hold. Examples include the number of relatively ordered subsequences of a random permutation, sliding window statistics including the number of m-runs in a sequence of coin tosses, the number of local maximum of a random function on a lattice, the number of urns containing exactly one ball in an urn allocation model, the volume covered by the union of $n$ balls placed uniformly over a volume n subset of d diml Euclidean space, the number of bulbs switched on at the terminal time in the so called lightbulb process, the number of isolated vertices in the ...

  5. To appear in AI Magazine, Summer 2005. Description Logics and Planning

    E-Print Network [OSTI]

    Gil, Yolanda

    To appear in AI Magazine, Summer 2005. Description Logics and Planning Yolanda Gil USC previous work on combining planning techniques with expressive representations of knowledge in description logics to reason about tasks, plans, and goals. Description logics can reason about the logical

  6. SSRS 2008 Web Reports Information Technology Systems Last Modified: July, 2012 UNCW

    E-Print Network [OSTI]

    Olszewski Jr., Edward A.

    SSRS 2008 Web Reports Information Technology Systems Last Modified: July, 2012 UNCW SQL Server REPORTS 2 #12;SSRS 2008 Web Reports Information Technology Systems Last Modified: July, 2012 UNCW Save. SSRSWEB REPORTS #12;SSRS 2008 Web Reports Information Technology Systems Last Modified: July

  7. Nanocomposite fibers and film containing polyolefin and surface-modified carbon nanotubes

    DOE Patents [OSTI]

    Chu,Benjamin (Setauket, NY); Hsiao, Benjamin S. (Setauket, NY)

    2010-01-26

    Methods for modifying carbon nanotubes with organic compounds are disclosed. The modified carbon nanotubes have enhanced compatibility with polyolefins. Nanocomposites of the organo-modified carbon nanotubes and polyolefins can be used to produce both fibers and films having enhanced mechanical and electrical properties, especially the elongation-to-break ratio and the toughness of the fibers and/or films.

  8. Distribution approximations for the chemical master equation: comparison of the method of moments and the system size expansion

    E-Print Network [OSTI]

    Alexander Andreychenko; Luca Bortolussi; Ramon Grima; Philipp Thomas; Verena Wolf

    2015-09-30

    The stochastic nature of chemical reactions involving randomly fluctuating population sizes has lead to a growing research interest in discrete-state stochastic models and their analysis. A widely-used approach is the description of the temporal evolution of the system in terms of a chemical master equation (CME). In this paper we study two approaches for approximating the underlying probability distributions of the CME. The first approach is based on an integration of the statistical moments and the reconstruction of the distribution based on the maximum entropy principle. The second approach relies on an analytical approximation of the probability distribution of the CME using the system size expansion, considering higher-order terms than the linear noise approximation. We consider gene expression networks with unimodal and multimodal protein distributions to compare the accuracy of the two approaches. We find that both methods provide accurate approximations to the distributions of the CME while having different benefits and limitations in applications.

  9. The halo-model description of marked statistics

    E-Print Network [OSTI]

    Ravi K. Sheth

    2005-11-28

    Marked statistics allow sensitive tests of how galaxy properties correlate with environment, as well as of how correlations between galaxy properties are affected by environment. A halo-model description of marked correlations is developed, which incorporates the effects which arise from the facts that typical galaxy marks (e.g., luminosity, color, star formation rate, stellar mass) depend on the mass of the parent halo, and that massive haloes extend to larger radii and populate denser regions. Comparison with measured marked statistics in semi-analytic galaxy formation models shows good agreement on scales smaller than a Megaparsec, and excellent agreement on larger scales. The halo-model description shows clearly that the behaviour of some low-order marked statistics on these scales encodes information about the mean galaxy mark as a function of halo mass, but is insensitive to mark-gradients within haloes. Higher-order statistics encode information about higher order moments of the distribution of marks within haloes. This information is obtained without ever having to identify haloes or clusters in the galaxy distribution. On scales smaller than a Megaparsec, the halo-model calculation shows that marked statistics allow sensitive tests of whether or not central galaxies in haloes are a special population. A prescription for including more general mark-gradients in the halo-model description is also provided. The formalism developed here is particularly well-suited to interpretation of marked statistics in astrophysical datasets, because it is phrased in the same language that is currently used to interpret more standard measures of galaxy clustering.

  10. CASK/MSC/WP PREPARATION SYSTEM DESCRIPTION DOCUMENT

    SciTech Connect (OSTI)

    S. Drummond

    2005-04-12

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the Cask/MSC/WP preparation system and their bases to allow the design effort to proceed to license application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design, as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience and users are design engineers. This type of SDD both leads and trails the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. This SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. This SDD addresses the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]) requirements. Additional PRD requirements may be cited, as applicable, to drive the design of specific aspects of the system, with justifications provided in the basis. Functional and operational requirements applicable to this system are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]) document. Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (BSC 2004 [DIRS 171599]) and the preclosure safety analyses.

  11. Generalized Gibbs state with modified Redfield solution: Exact agreement up to second order

    SciTech Connect (OSTI)

    Thingna, Juzar; Wang, Jian-Sheng; Haenggi, Peter

    2012-05-21

    A novel scheme for the steady state solution of the standard Redfield quantum master equation is developed which yields agreement with the exact result for the corresponding reduced density matrix up to second order in the system-bath coupling strength. We achieve this objective by use of an analytic continuation of the off-diagonal matrix elements of the Redfield solution towards its diagonal limit. Notably, our scheme does not require the provision of yet higher order relaxation tensors. Testing this modified method for a heat bath consisting of a collection of harmonic oscillators we assess that the system relaxes towards its correct coupling-dependent, generalized quantum Gibbs state in second order. We numerically compare our formulation for a damped quantum harmonic system with the nonequilibrium Green's function formalism: we find good agreement at low temperatures for coupling strengths that are even larger than expected from the very regime of validity of the second-order Redfield quantum master equation. Yet another advantage of our method is that it markedly reduces the numerical complexity of the problem; thus, allowing to study efficiently large-sized system Hilbert spaces.

  12. Requirements Management System Browser (RMSB) software design description

    SciTech Connect (OSTI)

    Frank, D.D.

    1996-09-30

    The purpose of this document is to provide an ``as-built`` design description for the Requirements Management System Browser (RMSB) application. The Graphical User Interface (GUI) and database structure design are described for the RMSB application, referred to as the ``Browser.`` The RMSB application provides an easy to use PC-based interface to browse systems engineering data stored and managed in a UNIX software application. The system engineering data include functions, requirements, and architectures that make up the Tank Waste Remediation System (TWRS) technical baseline.

  13. 850/sup 0/C VHTR plant technical description

    SciTech Connect (OSTI)

    Not Available

    1980-06-01

    This report describes the conceptual design of an 842-MW(t) process heat very high temperature reactor (VHTR) plant having a core outlet temperature of 850/sup 0/C (1562/sup 0/F). The reactor is a variation of the high-temperature gas-cooled reactor (HTGR) power plant concept. The report includes a description of the nuclear heat source (NHS) and of the balance of reactor plant (BORP) requirements. The design of the associated chemical process plant is not covered in this report. The reactor design is similar to a previously reported VHTR design having a 950/sup 0/C (1742/sup 0/F) core outlet temperature.

  14. Joint system quantum descriptions arising from local quantumness

    E-Print Network [OSTI]

    Tom Cooney; Marius Junge; Miguel Navascues; David Perez-Garcia; Ignacio Villanueva

    2012-05-18

    Bipartite correlations generated by non-signalling physical systems that admit a finite-dimensional local quantum description cannot exceed the quantum limits, i.e., they can always be interpreted as distant measurements of a bipartite quantum state. Here we consider the effect of dropping the assumption of finite dimensionality. Remarkably, we find that the same result holds provided that we relax the tensor structure of space-like separated measurements to mere commutativity. We argue why an extension of this result to tensor representations seems unlikely.

  15. Description of 2003 CBECS Detailed Tables and Categories of Data

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)DecadeYear Jan Feb Mar Apr May Jun Jul AugAdditions1 0Delaware2 1 0 *Description

  16. Property:Description of Camera Types | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to: navigation, search Property NameDefinition Jump to:Property EditDescription

  17. Program Description | Savannah River Ecology Laboratory REU in Radioecology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation of Fe(II) by Carbon-Rich Matricesstudents working in wetland PROGRAM DESCRIPTION

  18. On the vacuum fluctuations, Pioneer Anomaly and Modified Newtonian Dynamics

    E-Print Network [OSTI]

    Dragan Slavkov Hajdukovic

    2011-02-08

    We argue that the so-called "Pioneer Anomaly" is related to the quantum vacuum fluctuations. Our approach is based on the hypothesis of the gravitational repulsion between matter and antimatter, what allows considering, the virtual particle-antiparticle pairs in the physical vacuum, as gravitational dipoles. Our simplified calculations indicate that the anomalous deceleration of the Pioneer spacecrafts could be a consequence of the vacuum polarization in the gravitational field of the Sun. At the large distances, the vacuum polarization by baryonic matter could mimic dark matter what opens possibility that dark matter do not exist, as advocated by the Modified Newtonian Dynamics (MOND).

  19. Cosmological Exact Solutions in Some Modified Gravitational Theories

    E-Print Network [OSTI]

    Bisabr, Yousef

    2015-01-01

    In a homogenous and isotropic cosmology, we introduce general exact solutions for some modified gravity models. In particular, we introduce exact solutions for power-law $f(R)$ gravity and Brans-Dicke theory in Einstein and Jordan conformal frames. In the Brans-Dicke case, the solutions are presented for both single and double exponential potentials in Einstein frame which correspond to power-law potentials in Jordan frame. Our analysis for extracting general exact solutions can also be generalized to those scalar-tensor theories in which the scalar field has an exponential coupling to Ricci scalar.

  20. Time machines and traversable wormholes in modified theories of gravity

    E-Print Network [OSTI]

    Francisco S. N. Lobo

    2012-12-05

    We review recent work on wormhole geometries in the context of modified theories of gravity, in particular, in f(R) gravity and with a nonminimal curvature-matter coupling, and in the recently proposed hybrid metric-Palatini theory. In principle, the normal matter threading the throat can be shown to satisfy the energy conditions and it is the higher order curvatures terms that sustain these wormhole geometries. We also briefly review the conversion of wormholes into time-machines, explore several of the time travel paradoxes and possible remedies to these intriguing side-effects in wormhole physics.

  1. Modified GBIG Scenario as a Successful Alternative for Dark Energy

    E-Print Network [OSTI]

    Nozari, Kourosh

    2009-01-01

    We construct a DGP-inspired braneworld model where induced gravity on the brane is modified in the spirit of $f(R)$ gravity and stringy effects are taken into account by incorporation of the Gauss-Bonnet term in the bulk action. We explore cosmological dynamics of this model and we show that this scenario is a successful alternative for dark energy proposal. Interestingly, it realizes the phantom-like behavior without introduction of any phantom field on the brane and the effective equation of state parameter crosses the cosmological constant line naturally in the same way as observational data suggest.

  2. Modified definition of group velocity and electromagnetic energy conservation equation

    E-Print Network [OSTI]

    Changbiao Wang

    2015-05-11

    The classical definition of group velocity has two flaws: (a) the group velocity can be greater than the phase velocity and break Fermat's principle in a non-dispersive, lossless, non-conducting, anisotropic uniform medium; (b) the definition is not consistent with the principle of relativity for a plane wave in a moving isotropic uniform medium. To remove the flaws, a modified definition is proposed. A criterion is set up to identify the justification of group velocity definition. A "superluminal power flow" is constructed to show that the electromagnetic energy conservation equation cannot uniquely define the power flow if the principle of Fermat is not taken into account.

  3. Modified gaseous atmospheres for storage of beef, lamb and pork 

    E-Print Network [OSTI]

    Davis, George Theodore

    1979-01-01

    MODIFIED G'~. ' . . OUS ATMOSPHERI. S FOR STORAGE OI REEF, I. PMB AND PORK A Thesis by GEORGE THEODORE DAVIS I II Submitted to thc. graduate college of Texas AsM University in partial fulfillment of the rec, u. 'rement fox the degree... of MASTER OF SCIENCE December ' 1979 Major Subject: Animal "" ience MODIF1ED GASEOUS ATMOSPHERES FOR STORAGE OF BEEFi LAMB AND PORK A Thesis GEORGE THEODORE DAVIS III Approved as to style and content. by (Co Chairman of ommittee) (Member) (Member...

  4. Hydrogen peroxide modified sodium titanates with improved sorption capabilities

    DOE Patents [OSTI]

    Nyman, May D. (Albuquerque, NM); Hobbs, David T. (North Augusta, SC)

    2009-02-24

    The sorption capabilities (e.g., kinetics, selectivity, capacity) of the baseline monosodium titanate (MST) sorbent material currently being used to sequester Sr-90 and alpha-emitting radioisotopes at the Savannah River Site are significantly improved when treated with hydrogen peroxide; either during the original synthesis of MST, or, as a post-treatment step after the MST has been synthesized. It is expected that these peroxide-modified MST sorbent materials will have significantly improved sorption capabilities for non-radioactive cations found in industrial processes and waste streams.

  5. Cosmological Exact Solutions in Some Modified Gravitational Theories

    E-Print Network [OSTI]

    Yousef Bisabr

    2015-05-04

    In a homogenous and isotropic cosmology, we introduce general exact solutions for some modified gravity models. In particular, we introduce exact solutions for power-law $f(R)$ gravity and Brans-Dicke theory in Einstein and Jordan conformal frames. In the Brans-Dicke case, the solutions are presented for both single and double exponential potentials in Einstein frame which correspond to power-law potentials in Jordan frame. Our analysis for extracting general exact solutions can also be generalized to those scalar-tensor theories in which the scalar field has an exponential coupling to Ricci scalar.

  6. The modified Klein Gordon equation for neolithic population migration

    E-Print Network [OSTI]

    M. Pelc; J. Marciak-Kozlowska; M. Kozlowski

    2007-03-11

    In this paper the model for the neolithic migration in Europe is developed. The new migration equation, the modified Klein Gordon equation is formulated and solved. It is shown that the migration process can be described as the hyperbolic diffusion with constant speed. In comparison to the existing models based on the generalization of the Fisher approach the present model describes the migration as the transport process with memory and offers the possibility to recover the initial state of migration which is the wave motion with finite velocity.

  7. Modified GBIG Scenario as an Alternative for Dark Energy

    E-Print Network [OSTI]

    Kourosh Nozari; Narges Rashidi

    2009-09-02

    We construct a DGP-inspired braneworld model where induced gravity on the brane is modified in the spirit of $f(R)$ gravity and stringy effects are taken into account by incorporation of the Gauss-Bonnet term in the bulk action. We explore cosmological dynamics of this model and we show that this scenario is a successful alternative for dark energy proposal. Interestingly, it realizes the phantom-like behavior without introduction of any phantom field on the brane and the effective equation of state parameter crosses the cosmological constant line naturally in the same way as observational data suggest.

  8. Dielectric behavior of barium modified strontium bismuth titanate ceramic

    SciTech Connect (OSTI)

    Nayak, P.; Badapanda, T.; Anwar, S.; Panigrahi, S.

    2014-04-24

    Barium Modified Strontium Bismuth Titanate(SBT) ceramic with general formula Sr1?xBaxBi4Ti4O15 is prepared by solid state reaction route. The structural analysis of the ceramics was done by X-ray diffraction technique. The X-ray patterns show that all the compositions are of single phase with orthorhombic structure. The temperature dependent dielectric behavior shows that the transition temperature decreases with Ba content but the maximum dielectric constant increases. The decreases of the transition with increase in Ba{sup 2+} ion, may be due to the decrease of orthorhombicity by the incorporation of Ba{sup 2+} ion in SBT lattice.

  9. Computing model independent perturbations in dark energy and modified gravity

    SciTech Connect (OSTI)

    Battye, Richard A. [Jodrell Bank Centre for Astrophysics, School of Physics and Astronomy, The University of Manchester, Manchester M13 9PL (United Kingdom); Pearson, Jonathan A., E-mail: richard.battye@manchester.ac.uk, E-mail: jonathan.pearson@durham.ac.uk [Department of Mathematical Sciences, Durham University, South Road, Durham, DH1 3LE (United Kingdom)

    2014-03-01

    We present a methodology for computing model independent perturbations in dark energy and modified gravity. This is done from the Lagrangian for perturbations, by showing how field content, symmetries, and physical principles are often sufficient ingredients for closing the set of perturbed fluid equations. The fluid equations close once ''equations of state for perturbations'' are identified: these are linear combinations of fluid and metric perturbations which construct gauge invariant entropy and anisotropic stress perturbations for broad classes of theories. Our main results are the proof of the equation of state for perturbations presented in a previous paper, and the development of the required calculational tools.

  10. Modified polynomial function model for reversed-field pinches

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines light on77 PAGEMission MissionModelingModified polynomial function model

  11. Sandia Energy - Sandia Modifies Delft3D Turbine Model

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation of Fe(II)Geothermal EnergyRenewable EnergyWAvesLawrenceImpacts ToolMapsModifies

  12. The Crystallization Behavior of Porous PLA Prepared by Modified Solvent Casting/Particulate Leaching Technique for Potential Use of Tissue Engineering Scaffold

    E-Print Network [OSTI]

    Ran Huang; Xiaomin Zhu; Haiyan Tu; Ajun Wan

    2014-04-14

    The porous PLA foams potential for tissue engineering usage are prepared by a modified solvent casting/particulate leaching method with different crystallinity. Since in typical method the porogens are solved in the solution and flow with the polymers during the casting and the crystallinity behavior of PLA chains in the limited space cannot be tracked, in this work the processing is modified by diffusing the PLA solution into a steady salt stack. With a thermal treatment before leaching while maintaining the stable structure of the porogens stack, the crystallinity of porous foams is made possible to control. The characterizations indicate the crystallization of porous foams is in a manner of lower crystallibility than the bulk materials. Pores and caves of around 250{\\mu}m size are obtained in samples with different crystallinity. The macro-structures are not much impaired by the crystallization nevertheless the morphological effect of the heating process is still obvious.

  13. Regulating the Regulators: The Increased Role for the Federal Judiciary in Monitoring the Debate over Genetically Modified Crops

    E-Print Network [OSTI]

    Denton, Blake

    2007-01-01

    Policy on Genetically Modified Food and Agriculture, 44 B.C.Regulation of Genetically Modified Foods, 35 U. MICH. J.L.Over Labeling of Genetically Modified Foods in the United

  14. Program Description Human Resource Management & PHR Prep program will

    E-Print Network [OSTI]

    Garfunkel, Eric

    the critical function of human resources in organi- zations of all sizes. You will learn to develop. Experienced public- and private-sector business people shifting into human resources careers. Departmental library and electronic Business Library, and support from a Rutgers University advisor/instructor. All

  15. Unusual Function of Modified Polyolefins for Manipulating Magnetic Nanostructures

    E-Print Network [OSTI]

    Guo, John Zhanhu

    (CO)5 or Co2(CO)8] in the presence of PP-g-MA in solvent xylene. By simply changing the backbone length. Among many developed approaches (high-temperature reduction, evapo- ration­condensation, melting-dependent physicochemical properties. The morphology (size and shape) control of magnetic NPs by many small molecular

  16. Lorentz Multiplet Structure of Baryon Spectra and Relativistic Description

    E-Print Network [OSTI]

    Kirchbach, M

    1997-01-01

    The pole positions of the various baryon resonances are known to reveal well-pronounced clustering, so-called Hoehler clusters. For nonstrange baryons the Hoehler clusters are shown to be identical to Lorentz multiplets of the type (j,j)*[(1/2,0)+(0,1/2)] with j being a half-integer. For the Lambda hyperons below 1800 MeV these clusters are shown to be of the type [(1,0)+ (0,1)]*[(1/2,0)+(0,1/2)] while above 1800 MeV they are parity duplicated (J,0)+(0,J) (Weinberg-Ahluwalia) states. Therefore, for Lambda hyperons the restoration of chiral symmetry takes place above 1800 MeV. Finally, it is demonstrated that the description of spin-3/2 particles in terms of a 2nd rank antisymmetric Lorentz tensor with Dirac spinor components does not contain any off-shell parameters and avoids the main difficulties of the Rarita-Schwinger description based upon a 4-vector with Dirac spinor components.

  17. Electric energy supply systems: description of available technologies

    SciTech Connect (OSTI)

    Eisenhauer, J.L.; Rogers, E.A.; King, J.C.; Stegen, G.E.; Dowis, W.J.

    1985-02-01

    When comparing coal transportation with electric transmission as a means of delivering electric power, it is desirable to compare entire energy systems rather than just the transportation/transmission components because the requirements of each option may affect the requirements of other energy system components. PNL's assessment consists of two parts. The first part, which is the subject of this document, is a detailed description of the technical, cost, resource and environmental characteristics of each system component and technologies available for these components. The second part is a computer-based model that PNL has developed to simulate construction and operation of alternative system configurations and to compare the performance of these systems under a variety of economic and technical conditions. This document consists of six chapters and two appendices. A more thorough description of coal-based electric energy systems is presented in the Introduction and Chapter 1. Each of the subsequent chapters describes technologies for five system components: Western coal resources (Chapter 2), coal transportation (Chapter 3), coal gasification and gas transmission (Chapter 4), and electric power transmission (Chapter 6).

  18. Unscreening modified gravity in the matter power spectrum

    E-Print Network [OSTI]

    Lucas Lombriser; Fergus Simpson; Alexander Mead

    2015-01-20

    Viable modifications of gravity that may produce cosmic acceleration need to be screened in high-density regions such as the Solar System, where general relativity is well tested. Screening mechanisms also prevent strong anomalies in the large-scale structure and limit the constraints that can be inferred on these gravity models from cosmology. We find that by suppressing the contribution of the screened high-density regions in the matter power spectrum, allowing a greater contribution of unscreened low densities, modified gravity models can be more readily discriminated from the concordance cosmology. Moreover, by variation of density thresholds, degeneracies with other effects may be dealt with more adequately. Specializing to chameleon gravity as a worked example for screening in modified gravity, employing N-body simulations of f(R) models and the halo model of chameleon theories, we demonstrate the effectiveness of this method. We find that a percent-level measurement of the clipped power at k Solar System tests or distance indicators in unscreened dwarf galaxies.

  19. Unscreening Modified Gravity in the Matter Power Spectrum

    E-Print Network [OSTI]

    Lucas Lombriser; Fergus Simpson; Alexander Mead

    2015-09-21

    Viable modifications of gravity that may produce cosmic acceleration need to be screened in high-density regions such as the Solar System, where general relativity is well tested. Screening mechanisms also prevent strong anomalies in the large-scale structure and limit the constraints that can be inferred on these gravity models from cosmology. We find that by suppressing the contribution of the screened high-density regions in the matter power spectrum, allowing a greater contribution of unscreened low densities, modified gravity models can be more readily discriminated from the concordance cosmology. Moreover, by variation of density thresholds, degeneracies with other effects may be dealt with more adequately. Specializing to chameleon gravity as a worked example for screening in modified gravity, employing N-body simulations of f(R) models and the halo model of chameleon theories, we demonstrate the effectiveness of this method. We find that a percent-level measurement of the clipped power at k Solar System tests or distance indicators in unscreened dwarf galaxies. Finally, we verify that our method is also applicable to the Vainshtein mechanism.

  20. Introduction to Modified Gravity and Gravitational Alternative for Dark Energy

    E-Print Network [OSTI]

    S. Nojiri; S. D. Odintsov

    2006-03-31

    We review various modified gravities considered as gravitational alternative for dark energy. Specifically, we consider the versions of $f(R)$, $f(G)$ or $f(R,G)$ gravity, model with non-linear gravitational coupling or string-inspired model with Gauss-Bonnet-dilaton coupling in the late universe where they lead to cosmic speed-up. It is shown that some of such theories may pass the Solar System tests. On the same time, it is demonstrated that they have quite rich cosmological structure: they may naturally describe the effective (cosmological constant, quintessence or phantom) late-time era with a possible transition from decceleration to acceleration thanks to gravitational terms which increase with scalar curvature decrease. The possibility to explain the coincidence problem as the manifestation of the universe expansion in such models is mentioned. The late (phantom or quintessence) universe filled with dark fluid with inhomogeneous equation of state (where inhomogeneous terms are originated from the modified gravity) is also described.

  1. Modified Gravity N-body Code Comparison Project

    E-Print Network [OSTI]

    Hans A. Winther; Fabian Schmidt; Alexandre Barreira; Christian Arnold; Sownak Bose; Claudio Llinares; Marco Baldi; Bridget Falck; Wojciech A. Hellwing; Kazuya Koyama; Baojiu Li; David F. Mota; Ewald Puchwein; Robert Smith; Gong-Bo Zhao

    2015-06-21

    Self-consistent ${\\it N}$-body simulations of modified gravity models are a key ingredient to obtain rigorous constraints on deviations from General Relativity using large-scale structure observations. This paper provides the first detailed comparison of the results of different ${\\it N}$-body codes for the $f(R)$, DGP, and Symmetron models, starting from the same initial conditions. We find that the fractional deviation of the matter power spectrum from $\\Lambda$CDM agrees to better than $1\\%$ up to $k \\sim 5-10~h/{\\rm Mpc}$ between the different codes. These codes are thus able to meet the stringent accuracy requirements of upcoming observational surveys. All codes are also in good agreement in their results for the velocity divergence power spectrum, halo abundances and halo profiles. We also test the quasi-static limit, which is employed in most modified gravity ${\\it N}$-body codes, for the Symmetron model for which the most significant non-static effects among the models considered are expected. We conclude that this limit is a very good approximation for all of the observables considered here.

  2. Carbon dioxide pressure swing adsorption process using modified alumina adsorbents

    DOE Patents [OSTI]

    Gaffney, T.R.; Golden, T.C.; Mayorga, S.G.; Brzozowski, J.R.; Taylor, F.W.

    1999-06-29

    A pressure swing adsorption process for absorbing CO[sub 2] from a gaseous mixture containing CO[sub 2] comprises introducing the gaseous mixture at a first pressure into a reactor containing a modified alumina adsorbent maintained at a temperature ranging from 100 C and 500 C to adsorb CO[sub 2] to provide a CO[sub 2] laden alumina adsorbent and a CO[sub 2] depleted gaseous mixture and contacting the CO[sub 2] laden adsorbent with a weakly adsorbing purge fluid at a second pressure which is lower than the first pressure to desorb CO[sub 2] from the CO[sub 2] laden alumina adsorbent. The modified alumina adsorbent which is formed by depositing a solution having a pH of 3.0 or more onto alumina and heating the alumina to a temperature ranging from 100 C and 600 C, is not degraded by high concentrations of water under process operating conditions. 1 fig.

  3. Modified Newton's law, braneworlds, and the gravitational quantum well

    E-Print Network [OSTI]

    F. Buisseret; B. Silvestre-Brac; V. Mathieu

    2007-01-18

    Most of the theories involving extra dimensions assume that only the gravitational interaction can propagate in them. In such approaches, called brane world models, the effective, 4-dimensional, Newton's law is modified at short as well as at large distances. Usually, the deformation of Newton's law at large distances is parametrized by a Yukawa potential, which arises mainly from theories with compactified extra dimensions. In many other models however, the extra dimensions are infinite. These approaches lead to a large distance power-law deformation of the gravitational newtonian potential $V_N(r)$, namely $V(r)=(1+k_b/r^b)V_N(r)$, which is less studied in the literature. We investigate here the dynamics of a particle in a gravitational quantum well with such a power-law deformation. The effects of the deformation on the energy spectrum are discussed. We also compare our modified spectrum to the results obtained with the GRANIT experiment, where the effects of the Earth's gravitational field on quantum states of ultra cold neutrons moving above a mirror are studied. This comparison leads to upper bounds on $b$ and $k_b$.

  4. Morphological studies on block copolymer modified PA 6 blends

    SciTech Connect (OSTI)

    Poindl, M., E-mail: marcus.poindl@ikt.uni-stuttgart.de, E-mail: christian.bonten@ikt.uni-stuttgart.de; Bonten, C., E-mail: marcus.poindl@ikt.uni-stuttgart.de, E-mail: christian.bonten@ikt.uni-stuttgart.de [Institut für Kunststofftechnik, University of Stuttgart (Germany)

    2014-05-15

    Recent studies show that compounding polyamide 6 (PA 6) with a PA 6 polyether block copolymers made by reaction injection molding (RIM) or continuous anionic polymerization in a reactive extrusion process (REX) result in blends with high impact strength and high stiffness compared to conventional rubber blends. In this paper, different high impact PA 6 blends were prepared using a twin screw extruder. The different impact modifiers were an ethylene propylene copolymer, a PA PA 6 polyether block copolymer made by reaction injection molding and one made by reactive extrusion. To ensure good particle matrix bonding, the ethylene propylene copolymer was grafted with maleic anhydride (EPR-g-MA). Due to the molecular structure of the two block copolymers, a coupling agent was not necessary. The block copolymers are semi-crystalline and partially cross-linked in contrast to commonly used amorphous rubbers which are usually uncured. The combination of different analysis methods like atomic force microscopy (AFM), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) gave a detailed view in the structure of the blends. Due to the partial cross-linking, the particles of the block copolymers in the blends are not spherical like the ones of ethylene propylene copolymer. The differences in molecular structure, miscibility and grafting of the impact modifiers result in different mechanical properties and different blend morphologies.

  5. Classifying Linearly Shielded Modified Gravity Models in Effective Field Theory

    E-Print Network [OSTI]

    Lucas Lombriser; Andy Taylor

    2015-01-31

    We study the model space generated by the time-dependent operator coefficients in the effective field theory of the cosmological background evolution and perturbations of modified gravity and dark energy models. We identify three classes of modified gravity models that reduce to Newtonian gravity on the small scales of linear theory. These general classes contain enough freedom to simultaneously admit a matching of the concordance model background expansion history. In particular, there exists a large model space that mimics the concordance model on all linear quasistatic subhorizon scales as well as in the background evolution. Such models also exist when restricting the theory space to operators introduced in Horndeski scalar-tensor gravity. We emphasize that whereas the partially shielded scenarios might be of interest to study in connection with tensions between large and small scale data, with conventional cosmological probes, the ability to distinguish the fully shielded scenarios from the concordance model on near-horizon scales will remain limited by cosmic variance. Novel tests of the large-scale structure remedying this deficiency and accounting for the full covariant nature of the alternative gravitational theories, however, might yield further insights on gravity in this regime.

  6. Modified Gravity N-body Code Comparison Project

    E-Print Network [OSTI]

    Hans A. Winther; Fabian Schmidt; Alexandre Barreira; Christian Arnold; Sownak Bose; Claudio Llinares; Marco Baldi; Bridget Falck; Wojciech A. Hellwing; Kazuya Koyama; Baojiu Li; David F. Mota; Ewald Puchwein; Robert E. Smith; Gong-Bo Zhao

    2015-09-29

    Self-consistent ${\\it N}$-body simulations of modified gravity models are a key ingredient to obtain rigorous constraints on deviations from General Relativity using large-scale structure observations. This paper provides the first detailed comparison of the results of different ${\\it N}$-body codes for the $f(R)$, DGP, and Symmetron models, starting from the same initial conditions. We find that the fractional deviation of the matter power spectrum from $\\Lambda$CDM agrees to better than $1\\%$ up to $k \\sim 5-10~h/{\\rm Mpc}$ between the different codes. These codes are thus able to meet the stringent accuracy requirements of upcoming observational surveys. All codes are also in good agreement in their results for the velocity divergence power spectrum, halo abundances and halo profiles. We also test the quasi-static limit, which is employed in most modified gravity ${\\it N}$-body codes, for the Symmetron model for which the most significant non-static effects among the models considered are expected. We conclude that this limit is a very good approximation for all of the observables considered here.

  7. Structure of cylindrical electric double layers: Comparison of density functional and modified Poisson-Boltzmann theories with Monte Carlo simulations

    E-Print Network [OSTI]

    V. Dorvilien; C. N. Patra; L. B. Bhuiyan; C. W. Outhwaite

    2013-12-17

    The structure of cylindrical double layers is studied using a modified Poisson Boltzmann theory and the density functional approach. In the model double layer, the electrode is a cylindrical polyion that is infinitely long, impenetrable, and uniformly charged. The polyion is immersed in a sea of equi-sized rigid ions embedded in a dielectric continuum. An in-depth comparison of the theoretically predicted zeta potentials, the mean electrostatic potentials, and the electrode-ion singlet density distributions is made with the corresponding Monte Carlo simulation data. The theories are seen to be consistent in their predictions that include variations in ionic diameters, electrolyte concentrations, and electrode surface charge densities, and are also capable of well reproducing some new and existing Monte Carlo results.

  8. Conceptual modular description of the high-level waste management system for system studies model development

    SciTech Connect (OSTI)

    McKee, R.W.; Young, J.R.; Konzek, G.J.

    1992-08-01

    This document presents modular descriptions of possible alternative components of the federal high-level radioactive waste management system and the procedures for combining these modules to obtain descriptions for alternative configurations of that system. The 20 separate system component modules presented here can be combined to obtain a description of any of the 17 alternative system configurations (i.e., scenarios) that were evaluated in the MRS Systems Studies program (DOE 1989a). First-approximation descriptions of other yet-undefined system configurations could also be developed for system study purposes from this database. The descriptions include, in a modular format, both functional descriptions of the processes in the waste management system, plus physical descriptions of the equipment and facilities necessary for performance of those functions.

  9. Guidelines for the writing of Job Descriptions The aim of a Job Description is to set out as clearly and concisely as possible

    E-Print Network [OSTI]

    Sussex, University of

    Guidelines for the writing of Job Descriptions The aim of a Job Description is to set out systems, posts cash to the nominal ledger. · State briefly the purpose of the activity in terms of outputs or standards to be achieved e.g. tests new systems to ensure that they meet the agreed systems specifications

  10. Size dependence of microprobe dynamics during gelation of a discotic colloidal clay

    E-Print Network [OSTI]

    and are used as rheological modifiers in many applications, such as paints, drilling fluids, consumer products

  11. The influence of cosmic rays on the size of the Antarctic Ozone Hole

    E-Print Network [OSTI]

    M. Alvarez Madrigal; J. Perez Peraza; V. M. Velasco

    2010-01-15

    The Antarctic region in which severe ozone depletion has taken place is known as the ozone hole. This region has two basic indicators: the area, where the ozone abundance is low (size), and the quantity of ozone mass deficit (depth). The energetic particles that penetrate deeply into the atmosphere and galactic cosmic rays (GCR) modify the ozone abundance in the stratosphere. With this research project, we are looking for evidence of a connection between variations in the cosmic ray flux and variations in the size of the ozone hole. In addition, we are looking for signs of the kind of processes that physically connect GCR fluxes with variations in the stratospheric ozone hole size (OHS) in the Antarctic region. With this goal in mind, we also analyze here the atmospheric temperature (AT) anomalies, which have often been linked with such variations. Using Morlet's wavelet spectral analysis to compute the coherence between two time series, we found that during the analyzed period (1982-2005), there existed a common signal of around 3 and 5 years between the OHS and GCR time series, during September and November, respectively. In both cases, the relationship showed a time-dependent anti-correlation between the two series. On the other hand, for October the analysis showed a time-dependent correlation that occurs around 1.7 years. These results seem to indicate that there exist at least two kinds of modulation processes of GCR fluxes on the OHS that work simultaneously but that change their relative relevance along the timeline.

  12. On the size-Ramsey number of hypergraphs Andrzej Dudek

    E-Print Network [OSTI]

    Mubayi, Dhruv

    On the size-Ramsey number of hypergraphs Andrzej Dudek Steven La Fleur Dhruv Mubayi Vojtech R¨odl§ March 20, 2015 Abstract The size-Ramsey number of a graph G is the minimum number of edges in a graph H such that every 2-edge-coloring of H yields a monochromatic copy of G. Size-Ramsey numbers of graphs have been

  13. A Note on Ramsey Size-Linear Graphs

    E-Print Network [OSTI]

    Simonovits, Miklós

    A Note on Ramsey Size-Linear Graphs P.N. Balister,1 R.H. Schelp,1 and M. Simonovits1,2 1 DEPARTMENT is a Ramsey size-linear graph and x,y 2 V(G ) then if we add a sufficiently long path between x and y we obtain a new Ramsey size-linear graph. As a consequence we show that if G is any graph such that every

  14. Description of an XRF system for multielemental analysis

    SciTech Connect (OSTI)

    Wielopolski, L.; Zhang, R.; Cohn, S.H.

    1986-01-01

    An X-ray fluorescence (XRF) system which uses radioisotopes in an orthogonal configuration between the source, sample, and detector is described. The advantage of such a system is that for large (bulk) samples or for in vivo measurements the background due to Compton scattering in the sample is minimized. High reproducibility for nonuniform samples is obtained by reducing the sample size and thus the effects of non-uniformity in the spatial response of such a system. Germane to any accurate analytical method is the use of proper mathematical algorithms for data evaluation. The problem is acute, in particular, when photopeaks with low counting statistics are to be analyzed. In the case of a single photopeak on flat, background optimal energy window size, which maximizes the signal-to-noise ratio, for trapezoidal intergration is described. The sensitivity and minimum detection limit at different energies together with background considerations are discussed. 13 refs., 8 figs., 2 tabs.

  15. THE SIZE DISTRIBUTION OF THE NEPTUNE TROJANS AND THE MISSING INTERMEDIATE-SIZED PLANETESIMALS

    SciTech Connect (OSTI)

    Sheppard, Scott S.; Trujillo, Chadwick A.

    2010-11-10

    We present an ultra-deep survey for Neptune Trojans using the Subaru 8.2 m and Magellan 6.5 m telescopes. The survey reached a 50% detection efficiency in the R band at m{sub R} = 25.7 mag and covered 49 deg{sup 2} of sky. m{sub R} = 25.7 mag corresponds to Neptune Trojans that are about 16 km in radius (assuming an albedo of 0.05). A paucity of smaller Neptune Trojans (radii < 45 km) compared with larger ones was found. The brightest Neptune Trojans appear to follow a steep power-law slope (q = 5 {+-} 1) similar to the brightest objects in the other known stable reservoirs such as the Kuiper Belt, Jupiter Trojans, and main belt asteroids. We find a roll-over for the Neptune Trojans that occurs around a radius of r = 45 {+-} 10 km (m{sub R} = 23.5 {+-} 0.3), which is also very similar to the other stable reservoirs. All the observed stable regions in the solar system show evidence for Missing Intermediate-Sized Planetesimals (MISPs). This indicates a primordial and not collisional origin, which suggests that planetesimal formation proceeded directly from small to large objects. The scarcity of intermediate- and smaller-sized Neptune Trojans may limit them as being a strong source for the short period comets.

  16. Code Description Code Description

    E-Print Network [OSTI]

    Assistant Tuition 5503 Instr Fld In-State 5213 Grad TA Salary 5511 International Travel 5214 Grad RA Salary 5501 Local Mileage 5215 GRA Salary 5441 Moving Expenses - Non-Taxable 5440 Moving Expenses - Taxable - Taxable to W2 * For Administrative and Research Faculty employee classes Classified Salary, Wages & Leave

  17. Solar Trackers Market - Global Industry Analysis, Size, Share...

    Open Energy Info (EERE)

    Solar Trackers Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast, 2010 - 2020 Home > Groups > Increase Natural Gas Energy Efficiency John55364's picture...

  18. Efficient Algorithm for Locating and Sizing Series Compensation...

    Office of Scientific and Technical Information (OSTI)

    Compensation Devices in Large Transmission Grids: Model Implementation We explore optimization methods for planning the placement, sizing and operations of Flexible Alternating...

  19. Sizing a New Water Heater | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    systems: Tankless or demand-type water heaters Solar water heating system Storage and heat pump (with tank) water heaters. For sizing combination water and space heating systems --...

  20. A note on string size evolution in phantom cosmology

    E-Print Network [OSTI]

    Soon-Tae Hong

    2015-04-05

    We analyze evolution of string size in higher-dimensional cosmology with phantom field. Assuming that the Universe possesses the phantom field defined in a ten-dimensional spacetime, we predict string size which is claimed to be that of photon in nature at present. The Universe size increases as in the standard inflationary Universe model while the photon size decreases drastically at the early stage of the string evolution after the Big Bang. Moreover, the photon spin in the phantom Universe is analyzed in the framework of the stringy cosmology.